Date: Sun, 08 Sep 1996 00:18:45 -0700 From: Dat Mai Ha <hamait@ea.oac.uci.edu> To: questions@FreeBSD.org Subject: freebsd dip Message-ID: <199609080718.AAA17384@taurus.oac.uci.edu>
next in thread | raw e-mail | index | archive | help
Hi Shadows,
Here is my output when type netstat -rn:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 128.200.1.201 UGSc 0 0 sl0
127.0.0.1 127.0.0.1 UH 0 80 lo0
128.200.1.201 128.200.244.188 UH 1 0 sl0
And here is the output when type ps -gax :
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? Is 0:00.02 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.13 (update)
49 ?? Ss 0:00.01 routed -q
69 ?? Ss 0:00.13 syslogd
75 ?? Is 0:00.01 portmap
80 ?? Is 0:00.01 rwhod
86 ?? I 0:00.00 nfsiod -n 4
87 ?? I 0:00.00 nfsiod -n 4
88 ?? I 0:00.00 nfsiod -n 4
89 ?? I 0:00.00 nfsiod -n 4
93 ?? Is 0:00.20 inetd
100 ?? Is 0:00.06 cron
103 ?? Is 0:00.06 lpd
111 ?? Is 0:00.02 sendmail: accepting connections (sendmail)
156 v0 Ss 0:00.57 -csh (csh)
273 v0 R+ 0:00.02 ps -gax
157 v1 Is+ 0:00.02 /usr/libexec/getty Pc ttyv1
158 v2 Is+ 0:00.02 /usr/libexec/getty Pc ttyv2
266 a1 Is+ 0:00.02 dip -d uc
--------------------------------------------------------------------
I dont' know what is FreeBSD box?
Do I have to recompile my kernel w/ a slip device and how I do the
setting routing for freeBSD? (as you mentioned -> make sure you have
your own ip routed back to your loopback driver.)
Also, in my hosts file I put as follow:
127.0.0.1 valentine.bsd.com localhost
192.168.0.1 valentine.bsd.com valentine
other IPs names here ...
.
.
.
Actually, I dont' know what wrong w/ my dip. I've just install FreeBSD
yesterday and do nothing much w/ it. Please help me out. Thanks a lot.
DH
>On Sat, 7 Sep 1996, Dat Mai Ha wrote:
> But in FreeBSD, after I dialed to my remote gateway by using 'dip', I
> obtained the dynamic IP for my local pc. The problem is after I got
> the IP for my local pc, I can't use 'telnet' or 'rlogin' or 'ftp' to
> connect to my account! When I use netstat -rn to check, it show
You mean your FreeBSD box?
> s the local IP and the gateway IP, the ethernet IP and the loopback IP
> (127.0.0.1). When I use ps -gax to list all the processes, I don't see
Did it show them or not? I mean can you mail me a sample output. I might
know whats wrong.
> the IP but the "dip filename". On the other hand, for Linux, after I
> connected to remote site, when I type ps -gax it shows the
> "dip filename ==> 128.200.xxx.xxx"! I don't have any problem w/ Linux dip
> but I don't know wy I can't use bsddip to connect to my remote site?
Linux dip does that it puts the ip up. I dont recall using bsdip and
seeing it so its normal
> Do I need to fix any file in /etc or some other files? If anybody can
> know how to use and setup dip please email for me. Thank you so much.
All I needed to do was compile my kernel with a slip device and made sure
I did the routing right.
Ok if its connecting to your own box after you connected your dailup link
make sure you have your own ip routed back to your loopback driver. I
found BSDdip failing to do this. Here's what I mean.
199.173.153.182 127.0.0.1 UGHS 0 0 lo0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199609080718.AAA17384>