From owner-freebsd-stable Mon Feb 12 06:36:38 1996 Return-Path: owner-stable Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id GAA02812 for stable-outgoing; Mon, 12 Feb 1996 06:36:38 -0800 (PST) Received: from public.wintek.com (public.wintek.com [199.233.104.88]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id GAA02805 for ; Mon, 12 Feb 1996 06:36:36 -0800 (PST) Received: from watson.grauel.com (watson.grauel.com [199.233.104.36]) by public.wintek.com (8.6.12/1.17wintek(3.6davy)) with ESMTP id JAA15480; Mon, 12 Feb 1996 09:36:31 -0500 Received: (from rjk@localhost) by watson.grauel.com (8.6.12/8.6.9) id JAA14442; Mon, 12 Feb 1996 09:42:47 -0500 Date: Mon, 12 Feb 1996 09:42:47 -0500 Message-Id: <199602121442.JAA14442@watson.grauel.com> From: Richard J Kuhns To: freebsd-stable@freebsd.org Subject: One problem && one question Sender: owner-stable@freebsd.org Precedence: bulk I'm now running FreeBSD-stable (I started with the sources from the 2.1 CD, and used ctm to update, as of Feb 6). Hardware: ASUS P55TP4XE motherboard, 120 MHz Pentium, 32 MB RAM, Buslogic 946C SCSI controller, 1 2GB Seagate, 1 1GB Fujitsu, SoundBlaster 16 with CD, and Diamond Stealth 64 video. The ``make world'' went without problems; it took 236 minutes. Here's the problem: I rebooted the machine a total of 7 times over the weekend; 5 times it couldn't sync the disks -- ``Syncing disks 4 4 4 .... 4 giving up'' (for example). Upon rebooting, the only thing fsck reported was ``clean flag not set in superblock''. I had never had this problem under either 2.0.5 or 2.1-RELEASE. Now my question: someone (Julian?) mentioned that there's now a wrapper to allow the 946C to be found during the PCI probe. I found the necessary file (sys/pci/bt9xx.c), but how do I convince config to use it? I have the following line in my config file: controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr Any help/comments would be greatly appreciated. Here's the dmesg output from my most recent reboot: FreeBSD 2.1-STABLE #0: Sat Feb 10 18:27:34 EST 1996 rjk@moran:/usr/2.1-STABLE/src/sys/compile/MORAN CPU: 120-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30654464 (29936K bytes) pcibus_setup(1): mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e) pcibus_setup(2): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=122d8086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 2 on pci0:0 chip1 rev 2 on pci0:7 vga0 rev 0 int a irq 10 on pci0:10 mapreg[10] type=0 addr=fb000000 size=800000. pci0:12: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned] map(10): io(e400) pci0: uses 8388608 bytes of memory from fb000000 upto fb7fffff. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> pca0 on motherboard pca0: PC speaker audio driver sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in bt0: Bt946C/ 0-(32bit) bus bt0: reading board settings, dma=5, int=11 bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15 bt0: targ 1 sync rate=10.00MB/s(100ns), offset=15 bt0: Using Strict Round robin scheme bt0 at 0x330 irq 11 drq 5 on isa bt0 waiting for scsi devices to settle (bt0:0:0): "FUJITSU M2694ES-512 812A" type 0 fixed SCSI 2 sd0(bt0:0:0): Direct-Access 1033MB (2117025 512 byte sectors) sd0(bt0:0:0): with 1819 cyls, 15 heads, and an average 77 sectors/track (bt0:1:0): "SEAGATE ST32550N 0011" type 0 fixed SCSI 2 sd1(bt0:1:0): Direct-Access 2047MB (4194058 512 byte sectors) sd1(bt0:1:0): with 3511 cyls, 11 heads, and an average 108 sectors/track matcd - Matsushita (Panasonic) CD-ROM Driver by FDIV, Version 1(26) 18-Oct-95 matcdc0 at 0x230-0x233 on isa matcdc0 Host interface type 0 matcd0: [CR-5630.75] sb0 at 0x220 irq 5 drq 1 on isa sb0: sbxvi0 at 0x0 drq 6 on isa sbxvo0: sbmidi0 at 0x300 on isa npx0 on motherboard npx0: INT 16 interface BIOS Geometries: 0:03ff3f20 0..1023=1024 cylinders, 0..63=64 heads, 1..32=32 sectors 1:03ff3f20 0..1023=1024 cylinders, 0..63=64 heads, 1..32=32 sectors 0 accounted for sd0s1: type 0xa5, start 735232, end = 2115583, size 1380352 : OK sd0s3: type 0x6, start 32, end = 735231, size 735200 : OK sd1s1: type 0xa5, start 32, end = 4192255, size 4192224 : OK -- Rich Kuhns rjk@grauel.com PO Box 6249 100 Sawmill Road Lafayette, IN 47903 (317)477-6000 x319