From owner-freebsd-mobile Sun Mar 1 09:05:11 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA03931 for freebsd-mobile-outgoing; Sun, 1 Mar 1998 09:05:11 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from firewall.ftf.dk (root@mail.ftf.dk [129.142.64.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA03909 for ; Sun, 1 Mar 1998 09:05:06 -0800 (PST) (envelope-from regnauld@deepo.prosa.dk) Received: from mail.prosa.dk ([192.168.100.2]) by firewall.ftf.dk (8.7.6/8.7.3) with ESMTP id TAA08350; Sun, 1 Mar 1998 19:53:48 +0100 Received: from deepo.prosa.dk (deepo.prosa.dk [192.168.100.10]) by mail.prosa.dk (8.8.5/8.8.5/prosa-1.1) with ESMTP id SAA24000; Sun, 1 Mar 1998 18:12:52 +0100 (CET) Received: (from regnauld@localhost) by deepo.prosa.dk (8.8.7/8.8.5/prosa-1.1) id SAA16305; Sun, 1 Mar 1998 18:03:29 +0100 (CET) Message-ID: <19980301180329.64994@deepo.prosa.dk> Date: Sun, 1 Mar 1998 18:03:29 +0100 From: Philippe Regnauld To: Brian Somers Cc: Nate Williams , mobile@FreeBSD.ORG Subject: Re: 2.2.5+PAO => IRQ allocation failed && driver allocation failed References: <19980301010738.07394@deepo.prosa.dk> <199803010117.BAA17035@awfulhak.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.88e In-Reply-To: <199803010117.BAA17035@awfulhak.org>; from Brian Somers on Sun, Mar 01, 1998 at 01:17:36AM +0000 X-Operating-System: FreeBSD 2.2.5-RELEASE i386 Organization: PROSA Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Brian Somers writes: > > I have an Acer 950 w/ 3c589c. Works fine under RELENG_2_2 :-) I can > even suspend while connected to the network at work, and resume on my > home network !!! After resume, it DHCPs a new IP and starts > forwarding queued news & mail. I don't need to touch anything. > > My pccard.conf has: > > # Generally available IO ports > io 0x260-0x360 Similar. > # Generally available IRQs (Built-in sound-card owners remove 5) > irq 10 11 13 15 I have 10 11 15 > # Available memory slots > memory 0xc0000 96k I have 0xd4000 (I tried 0xc0000) > # 3Com Etherlink III 3C589B, 3C589C > card "3Com Corporation" "3C589" > config 0x1 "ep0" 10 Same here. No luck, still not working. Here's DMESG: [...] Checking slot 0. PCIC ID = 0x82 crd: ctlr(0) Cirrus Logic PD672X (5 mem & 2 I/O windows) pcic: controller I/O address 0x3e0 pcic: controller irq 9 (shared) Checking slot 1. PCIC ID = 0x82 pcic: controller I/O address 0x3e0 [...] Card inserted, slot 1 crd: IRQ allocation failed.crd: IRQ allocation failed.crd: IRQ allocation failed.crd: IRQ allocation failed. dumpcis: Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 89 05 PCMCIA ID = 0x101, OEM ID = 0x589 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 58 000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69 010: 6f 6e 00 33 43 35 38 39 44 00 54 50 2f 42 4e 43 020: 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 030: 61 00 30 30 30 30 30 32 00 ff Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589D] Addit. info = [TP/BNC LAN Card Ver. 2a],[000002] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 15 000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 5.0 x 100 us Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 03 01 71 55 26 26 54 Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 2 x 100mA Max current average over 10 ms: 2 x 100mA Power down supply current: 5 x 1mA Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0x10 (Checksum), length = 5 000: 88 ff 81 00 00 Checksum from offset -120, length 129, value is 0x0 Tuple #12, code = 0xff (Terminator), length = 149 000: 00 03 83 00 fd ff ff ff ff ff ff ff ff ff ff ff 010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 090: ff ff ff ff ff 2 slots found -- -[ Philippe Regnauld / sysadmin / regnauld@deepo.prosa.dk / +55.4N +11.3E ]- «Pluto placed his bad dog at the entrance of Hades to keep the dead IN and the living OUT! The archetypical corporate firewall?» - S. Kelly Bootle, ("MYTHOLOGY", in Marutukku distrib) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message