From owner-freebsd-mobile Sun Dec 6 07:30:59 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA06529 for freebsd-mobile-outgoing; Sun, 6 Dec 1998 07:30:59 -0800 (PST) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from hotmail.com (f199.hotmail.com [207.82.251.90]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id HAA06524 for ; Sun, 6 Dec 1998 07:30:58 -0800 (PST) (envelope-from repenting@hotmail.com) Received: (qmail 15144 invoked by uid 0); 6 Dec 1998 15:30:56 -0000 Message-ID: <19981206153056.15143.qmail@hotmail.com> Received: from 209.57.150.139 by www.hotmail.com with HTTP; Sun, 06 Dec 1998 07:30:55 PST X-Originating-IP: [209.57.150.139] From: "Mike Del" To: trost@cloud.rain.com Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Networking problems, Please Help! MIME-Version: 1.0 Content-Type: text/plain Date: Sun, 06 Dec 1998 07:30:55 PST Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >From: Bill Trost > >"Mike Del" writes: > When the freebsd pings the winbloz the return time is really bad, I > am talking in the 1000ms -to- 19000ms range. > >Sounds to me like an interrupt problem. Not uncommon. You might try >specifying different interrupt values for the card in /etc/pccardd.conf. > Ok, What different interrupt values should I use? I really need to get this card working. I have inclosed my pccard.conf and the results of pccardc dumpcis, so that someone could give me help. :) ----my pccard.conf---- # 3Com Etherlink III 3C589D. card "3Com Corporation" "3C589" config default "ep0" any insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device ----my pccardc dumpcis---- Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 89 05 PCMCIA ID = 0x101, OEM ID = 0x589 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 58 000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69 010: 6f 6e 00 33 43 35 38 39 44 00 54 50 2f 42 4e 43 020: 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 030: 61 00 30 30 30 30 30 32 00 ff Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589D] Addit. info = [TP/BNC LAN Card Ver. 2a],[000002] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 15 000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 5.0 x 100 us Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 03 01 71 55 26 26 54 Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 2 x 100mA Max current average over 10 ms: 2 x 100mA Power down supply current: 5 x 1mA Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0x10 (Checksum), length = 5 000: 88 ff 81 00 00 Checksum from offset -120, length 129, value is 0x0 Tuple #12, code = 0xff (Terminator), length = 149 000: 00 03 83 00 fd ff ff ff ff ff ff ff ff ff ff ff 010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 090: ff ff ff ff ff 2 slots found All help is needed, please, I really need to get this card working. Thanks ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message