Date: Sun, 22 Mar 1998 17:53:49 +0100 From: Andreas Klemm <andreas@klemm.gtn.com> To: scsi@FreeBSD.ORG Subject: new cam patches, (sa0:ahc0:0:4:0): SCB 0x18 - timed out... Message-ID: <19980322175349.41717@klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
mt -f /dev/st0 rewind hangs. I have running a current of 03/08/98 and cam-980308.diffs applied. Is my TDC 4222 a known "rogue" in the CAM developement area ? Andreas /// Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Sun Mar 22 11:00:54 CET 1998 root@titan.klemm.gtn.com:/home/data/sys.bisdn/compile/BISDNSMPCAM Timecounter "i8254" frequency 1193182 Hz cost 3601 ns CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping=9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> real memory = 83886080 (81920K bytes) avail memory = 78659584 (76816K bytes) FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Probing for devices on PCI bus 0: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 vx0: <3COM 3C900 Etherlink XL PCI> rev 0x00 int a irq 19 on pci0.11.0 utp/aui/bnc[*utp*] address 00:60:97:aa:3a:db vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 18 on pci0.12.0 ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.13.0 ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec 2940 SCSI adapter> rev 0x03 int a irq 16 on pci0.14.0 ahc1: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs Sequencer start failed: 0x2: 0x0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <4 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 10 maddr 0xd0000 msize 16384 on isa ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit) sio0 at 0x3f8-0x3ff irq 4 flags 0x20 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in tel0 at 0xd80 irq 9 on isa tel0: card type Teles S0/16.3 npx0 flags 0x1 on motherboard npx0: INT 16 interface joy0 at 0x201 on isa joy0: joystick APIC_IO: routing 8254 via 8259 on pin 0 ccd0-3: Concatenated disk drivers IP packet filtering initialized, divert disabled, default to accept, logging limited to 100 packets/entry SMP: AP CPU #1 Launched! (probe4:ahc0:0:4:0): SCB 0x4 - timed out in datain phase, SCSISIGI == 0x44 SEQADDR == 0x10d SSTAT1 == 0x2 (probe4:ahc0:0:4:0): BDR message in message buffer (probe4:ahc0:0:4:0): SCB 0x4 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x10d SSTAT1 == 0x2 (probe4:ahc0:0:4:0): no longer in timeout ahc0: Issued Channel A Bus Reset. 3 SCBs aborted sa0 at ahc0 bus 0 target 4 lun 0 sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI2 device sa0: Serial Number SN42200227 sa0: 3.300MB/s transfers changing root device to da0s3a da1 at ahc1 bus 0 target 1 lun 0 da1: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device da1: Serial Number 5U2N3906 da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da2 at ahc1 bus 0 target 2 lun 0 da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device da2: Serial Number 5U312691 da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI2 device da0: Serial Number 5U6G6557 da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) vx0: selected bnc. (link1) cd0 at ahc0 bus 0 target 6 lun 0 cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI2 device cd0: 10.0MB/s transfers (10.0MHz, offset 8) cd0: cd present [232086 x 2048 byte records] Assigned: TEI = 0xc3 = 97 (da0:ahc0:0:0:0): tagged openings now 32 (sa0:ahc0:0:4:0): SCB 0x18 - timed out in datain phase, SCSISIGI == 0x44 SEQADDR == 0x10e SSTAT1 == 0x2 (sa0:ahc0:0:4:0): BDR message in message buffer (sa0:ahc0:0:4:0): SCB 0x18 - timed out in datain phase, SCSISIGI == 0x54 SEQADDR == 0x10e SSTAT1 == 0x2 (sa0:ahc0:0:4:0): no longer in timeout ahc0: Issued Channel A Bus Reset. 3 SCBs aborted # # BISDN kernel # machine "i386" cpu "I686_CPU" ident BISDNSMPCAM maxusers 64 # SMP Stuff options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O #options USER_LDT # for Wine #Debugging options DDB options KTRACE #kernel tracing options SHOW_BUSYBUFS # busy buffers on shutdown ? options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # Networking options INET #InterNETworking options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about dropped packets options "IPFIREWALL_VERBOSE_LIMIT=100" #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default #options IPDIVERT #divert sockets # filesystems options FFS #Berkeley Fast Filesystem #options SOFTUPDATES #Kirk McKusick's code #options DSI_SOFT_MODEM #code for DSI Softmodems options QUOTA #enable disk quotas options NFS #Network File System options MFS #Memory File System options PROCFS #Process filesystem options MSDOSFS #MS DOS File System options "CD9660" #ISO 9660 filesystem options NSWAPDEV=3 #Allow this many swap-devices. options FDESC #File descriptor filesystem # misc options options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options SYSVSHM,SYSVSEM,SYSVMSG #shared memory (X11) options "MD5" options COMPAT_LINUX # Linux Binary compatibility #options "VM86" config kernel root on da1 # ISA and PCI BUS support controller isa0 controller pci0 # PnP Support controller pnp0 # Floppy Disk Controller controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 # SCSI Devices # AHA 2940U controller ahc0 controller scbus0 at ahc0 disk da0 at scbus0 target 0 unit 0 disk da3 at scbus0 target 1 unit 0 tape sa0 at scbus0 target 4 device worm0 at scbus0 target 5 device cd0 at scbus0 target 6 # AHA 2940 controller ahc1 controller scbus1 at ahc1 disk da1 at scbus1 target 1 unit 0 disk da2 at scbus1 target 2 unit 0 options SCSI_DELAY=8 # Be pessimistic about Joe SCSI device options AHC_TAGENABLE # tagged command queueing options AHC_ALLOW_MEMIO options AHC_SCBPAGING_ENABLE #options "PQ_MEDIUMCACHE" #options "PQ_LARGECACHE" options SCSI_REPORT_GEOMETRY # SCO compatible system console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=4 # number of virtual consoles options SC_HISTORY_SIZE=200 # number of history buffer lines # floating point unit device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # serial devices on mainboard # `flags' for serial drivers that support consoles (only for sio now): # 0x10 enable console support for this unit. The other console flags # are ignored unless this is set. Enabling console support does # not make the unit the preferred console - boot with -h or set # the 0x20 flag for that. Currently, at most one unit can have # console support; the first one (in config file order) with # this flag set is preferred. Setting this flag for sio0 gives # the old behaviour. # 0x20 force this unit to be the console (unless there is another # higher priority console). This replaces the COMCONSOLE option. # 0x40 reserve this unit for low level console operations. Do not # device sio0 at isa? port "IO_COM1" tty irq 4 flags 0x20 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to DDB, #if available. options CONSPEED=38400 #default speed for serial console #(default 9600) # parallel device on mainboard device lpt0 at isa? port? tty irq 7 vector lptintr # PS/2 mouse on mainboard device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr options "PSM_ACCEL=1" # PS/2 mouse acceleration # Joystick device joy0 at isa? port "IO_GAME" # Network 3COM PCI device vx0 device ed0 at isa? port 0x280 net irq 10 iomem 0xd0000 vector edintr # Soundblaster 16 # SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB) # SoundBlaster 16 DSP driver - for SB16 - requires sb0 device # SoundBlaster 16 MIDI - for SB16 - requires sb0 device # Yamaha OPL-2/OPL-3 FM - for SB, SB Pro, SB16, PAS # controller snd0 # device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr # device sbxvi0 at isa? port? irq? drq 5 conflicts # device sbmidi0 at isa? port 0x330 irq? conflicts # device opl0 at isa? port 0x388 conflicts # pcm: PCM audio through various sound cards. device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x15 vector pcmintr # Pseudo devices pseudo-device loop pseudo-device ether pseudo-device vn 1 #Vnode driver (turns a file into a dev.) pseudo-device tun 1 #user mode ppp pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device ccd 4 #Concatenated disk driver pseudo-device ppp 1 #Point-to-point protocol options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpfilter) # BISDN options IPI_VJ # Van Jacobsen header compression support #options "IPI_DIPA=3" # send ip accounting packets every 3 seconds options TELES_HAS_MEMCPYB # bisdn 0.97 # Teles S0/16.3 ###################################################### IRQ 9 ## controller tel0 at isa? port 0xd80 net irq 9 vector telintr pseudo-device disdn pseudo-device isdn pseudo-device ipi 4 pseudo-device ispy 4 pseudo-device itel 2 -- Andreas Klemm http://www.FreeBSD.ORG/~andreas powered by ,,symmetric multiprocessor FreeBSD'' To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980322175349.41717>