From owner-freebsd-smp Sun Nov 29 04:36:20 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA25875 for freebsd-smp-outgoing; Sun, 29 Nov 1998 04:36:20 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA25854; Sun, 29 Nov 1998 04:36:08 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from we.lc.ehu.es by polaris.we.lc.ehu.es (SMI-8.6/SMI-SVR4) id NAA14002; Sun, 29 Nov 1998 13:35:54 +0100 Message-ID: <36613FA9.FC5804A3@we.lc.ehu.es> Date: Sun, 29 Nov 1998 13:35:53 +0100 From: "José Mª Alcaide" Organization: Universidad del País Vasco - Dept. Electricidad y Electrónica X-Mailer: Mozilla 4.07 [en] (X11; U; FreeBSD 2.2.7-STABLE i386) MIME-Version: 1.0 To: freebsd-current@FreeBSD.ORG CC: freebsd-smp@FreeBSD.ORG Subject: Re: Patches and mptable for Supermicro P6DGU with 440GX chipset References: <21175.912295933@verdi.nethelp.no> Content-Type: multipart/mixed; boundary="------------32FF8BD54608B37B1BBC3BEF" Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------32FF8BD54608B37B1BBC3BEF Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit sthaug@nethelp.no wrote: > > I now have FreeBSD-current up and running on a Supermicro P6DGU mother- > board with 440GX chipset, 2 x PII-400 and onboard Adaptec 7890 U2W SCSI. > Getting FreeBSD up and running was relatively painless, and it seems to > be working great so far. The only SMP options I'm currently using are > SMP and APIC_IO. > I don't know if the SMP people are compiling a list of motherboards which run flawlessly (or not). In any case, I can also report on success running FreeBSD 3.0-RELEASE on a Supermicro P6DBU, based on the BX chipset but identical to the P6DGU otherwise, 2xPII-450, 256 MB SDRAM, IBM DDRS-34560 UW HD, 2xIBM DGHS18V U2W HDs. No problems after "make world" using the three disks. Mptable output is included as attachment. -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | http://www.we.lc.ehu.es/~jose Dpto. de Electricidad y Electrónica | Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-944858139 ----------------------------------------------------------------------- "Go ahead... make my day." - H. Callahan --------------32FF8BD54608B37B1BBC3BEF Content-Type: text/plain; charset=us-ascii; name="mptable" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="mptable" =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000fb4f0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0xbd mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f24b0 signature: 'PCMP' base table length: 268 version: 1.4 checksum: 0xab OEM ID: 'INTEL ' Product ID: '440BX ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 25 local APIC address: 0xfee00000 extended table length: 16 extended table checksum: 234 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 5 2 0x183fbff 1 0x11 AP, usable 6 5 2 0x183fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 5 2 5 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT active-hi edge 2 8 2 8 INT conforms conforms 2 12 2 12 INT conforms conforms 2 13 2 13 INT conforms conforms 2 14 2 14 INT conforms conforms 2 15 2 15 INT active-lo level 2 10 2 16 INT active-lo level 2 11 2 17 INT active-lo level 2 9 2 18 SMI conforms conforms 2 0 2 23 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 0 0:A 255 0 NMI conforms conforms 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: Extended Table HOSED! --------------32FF8BD54608B37B1BBC3BEF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sun Nov 29 06:05:23 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA02152 for freebsd-smp-outgoing; Sun, 29 Nov 1998 06:05:23 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from golem.belabm.by (golem.belabm.by [194.226.122.185]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA01907 for ; Sun, 29 Nov 1998 06:02:33 -0800 (PST) (envelope-from scaner@belabm.by) Received: from belabm.by (saint.belabm.by [194.226.122.183]) by golem.belabm.by (8.8.7/8.8.4) with ESMTP id PAA11510; Sun, 29 Nov 1998 15:42:08 +0300 Message-ID: <36614DEC.155BFF05@belabm.by> Date: Sun, 29 Nov 1998 15:36:44 +0200 From: Eugene Vedistchev Reply-To: scaner@belabm.by Organization: Global One in Belarus X-Mailer: Mozilla 4.5 [en] (Win98; I) X-Accept-Language: ru MIME-Version: 1.0 To: Gus Bourg , freebsd-smp@FreeBSD.ORG Subject: Re: 25 pin apic References: Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello. The problem with Compaq SMP servers is: Compaq configuration utility have several OS presets (NW,SCO,NT,OS/2,Vines), which ajusts some chipset, CPU and SMP mode settings. Although no one of thise presets is suitable for FreeBSD and Linux. To switch Compaq box to suitable mode you need to run configuration utility from SmartStart CD or from system partition, than, when you'll see textmode(not graphics fonts) menu with the following items - configure system, configure Smart Array... press Control-A sequence. The utility say that you'll enter in Advanced (not documented) mode. Then go to system configuration, set MPTABLE option into FULL mode, save and go on. FreeBSD will run perfectly on your Compaq server. WBR, Eugene PS. Sorry for bad english :) Gus Bourg wrote: > > I read an earlier message regarding 25 interrupt pins. It seems FreeBSD at > the moment only supports 24, is that still true? I have a couple of Compaq > Proliant 3000s here that I want to get up and running with FreeBSD/SMP, > but I get the same error, panic: assign_apic_irq: inconsistent table. Are > there any known workarounds for this? Are there plans to support more than > 24pins? > > Thanks! > Gus Bourg > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sun Nov 29 09:53:28 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA17899 for freebsd-smp-outgoing; Sun, 29 Nov 1998 09:53:28 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from maila.telia.com (maila.telia.com [194.236.189.4]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA17894 for ; Sun, 29 Nov 1998 09:53:25 -0800 (PST) (envelope-from s.lindgren@telia.com) Received: from d1o49.telia.com (root@d1o49.telia.com [195.198.194.241]) by maila.telia.com (8.8.8/8.8.8) with ESMTP id SAA23725 for ; Sun, 29 Nov 1998 18:53:12 +0100 (CET) Received: from prutten (t3o49p18.telia.com [195.198.194.138]) by d1o49.telia.com (8.8.8/8.8.5) with SMTP id SAA10945 for ; Sun, 29 Nov 1998 18:53:11 +0100 (CET) Message-ID: <003101be1bc1$ee0510a0$8ac2c6c3@prutten> Reply-To: "Stefan Lindgren" From: "Stefan Lindgren" To: Subject: SMP implementation information. Date: Sun, 29 Nov 1998 18:58:50 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id JAA17895 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello SMP. I starting up a pthreads project and I need to know a little bit more about the implementation of SMP(and pthreads). Could someone please give me some pointers to documentation about this? Syprix AB Stefan Lindgren UNIX System Consultant Phone: +46 709 220 770 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Nov 30 05:30:23 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA25878 for freebsd-smp-outgoing; Mon, 30 Nov 1998 05:30:23 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from dingo.cdrom.com (ppp7.portal.net.au [202.12.71.107]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA25871; Mon, 30 Nov 1998 05:30:18 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Received: from dingo.cdrom.com (localhost [127.0.0.1]) by dingo.cdrom.com (8.9.1/8.8.8) with ESMTP id BAA00828; Sun, 29 Nov 1998 01:51:42 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Message-Id: <199811290951.BAA00828@dingo.cdrom.com> X-Mailer: exmh version 2.0.2 2/24/98 To: Bruce Evans cc: jc@irbs.com, mike@smith.net.au, current@FreeBSD.ORG, smp@FreeBSD.ORG Subject: Re: Dog Sloooow SMP In-reply-to: Your message of "Sun, 08 Nov 1998 13:43:52 +1100." <199811080243.NAA32642@godzilla.zeta.org.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 29 Nov 1998 01:51:42 -0800 From: Mike Smith Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >No idea. I've received verification that fixing this for all 686-class > >CPUs seems to work (ie. it's OK on the Cyrix MII and doesn't appear to > >impact performance there), so the tests are now generalised for the > >entire 686-class. > > It's only OK for MII's because of various `#if 0's and `#ifdef SMP's > that prevent non-OK code from running on MII's. Care to comment on which operations aren't OK? I did ask for this in the review phase, with no feedback. -- \\ Sometimes you're ahead, \\ Mike Smith \\ sometimes you're behind. \\ mike@smith.net.au \\ The race is long, and in the \\ msmith@freebsd.org \\ end it's only with yourself. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Nov 30 07:34:13 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id HAA08508 for freebsd-smp-outgoing; Mon, 30 Nov 1998 07:34:13 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from godzilla.zeta.org.au (godzilla.zeta.org.au [203.15.68.22]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id HAA08499; Mon, 30 Nov 1998 07:34:10 -0800 (PST) (envelope-from bde@godzilla.zeta.org.au) Received: (from bde@localhost) by godzilla.zeta.org.au (8.8.7/8.8.7) id CAA00461; Tue, 1 Dec 1998 02:33:53 +1100 Date: Tue, 1 Dec 1998 02:33:53 +1100 From: Bruce Evans Message-Id: <199811301533.CAA00461@godzilla.zeta.org.au> To: bde@zeta.org.au, mike@smith.net.au Subject: Re: Dog Sloooow SMP Cc: current@FreeBSD.ORG, jc@irbs.com, smp@FreeBSD.ORG Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> >No idea. I've received verification that fixing this for all 686-class >> >CPUs seems to work (ie. it's OK on the Cyrix MII and doesn't appear to >> >impact performance there), so the tests are now generalised for the >> >entire 686-class. >> >> It's only OK for MII's because of various `#if 0's and `#ifdef SMP's >> that prevent non-OK code from running on MII's. > >Care to comment on which operations aren't OK? I did ask for this in >the review phase, with no feedback. Most wrmsr()s and rdmsr()s. Bruce To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Dec 1 09:08:38 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA18312 for freebsd-smp-outgoing; Tue, 1 Dec 1998 09:08:38 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from Ilsa.StevesCafe.com (Ilsa.StevesCafe.com [205.168.119.129]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA18305 for ; Tue, 1 Dec 1998 09:08:35 -0800 (PST) (envelope-from fbsd@Ilsa.StevesCafe.com) Received: from Ilsa.StevesCafe.com (localhost.StevesCafe.com [127.0.0.1]) by Ilsa.StevesCafe.com (8.8.8/8.8.5) with ESMTP id KAA20357; Tue, 1 Dec 1998 10:27:00 -0700 (MST) Message-Id: <199812011727.KAA20357@Ilsa.StevesCafe.com> X-Mailer: exmh version 2.0.2 2/24/98 From: Steve Passe To: Mike Smith cc: "Pete McKenna" , smp@FreeBSD.ORG Subject: Re: SMP Xeon update In-reply-to: Your message of "Tue, 24 Nov 1998 15:30:18 PST." <199811242330.PAA01653@dingo.cdrom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 01 Dec 1998 10:27:00 -0700 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, > > > > I was looking through the SMP Archive and haven't seen much recently on the > > quad Xeon box you had been testing. > > > > We are looking for a MRTG box to do our network metrics and it looks > > like this would hold us for awhile at the rate things are expanding. Can > > you me update on what's happened and if the onboard controllers are > > usable. We're are planning on running 3.0 release and only need 2 drives > > on either an adaptec or the onboard controller (I'm a bit fuzzy on what > > the onboard controller is) > > The box is running quite stable at the moment (3.0-current). I take it > you're looking for something with a lot of compute legs? > > The system we have here is a pre-release Intel box; I don't know if > it's actually available for purchase anywhere, and for your needs it's > probably very much overspecified (3 PCI busses, 12-bay hotswap disk > array). > > Both Acer and Toshiba were showing systems at Comdex using the same > processor array but with only 1 memory card (4GB max) and a smaller I/O > arrangement. > > The Toshiba system was the Magnia 7000; their pages say it comes with a > 53C896 (ncr) chipset SCSI controller, so it should be just fine. They > were showing it with the AMI MegaRaid, which wouldn't be so good, as we > don't support it yet. > > The Acer system was, I think, an Altos 21000, which looked to be the > same system down to the metalwork. Street price on these should be > around the $10k mark according to Toshiba. check out: http://www.atipa.com/cgi-bin/systembuilder?sc450nx http://www.intel.com/design/servers/sc450nx/prodspec.htm -- Steve Passe | powered by smp@csn.net | Symmetric MultiProcessor FreeBSD To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Tue Dec 1 15:44:56 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA05153 for freebsd-smp-outgoing; Tue, 1 Dec 1998 15:44:56 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from dingo.cdrom.com (ppp10.portal.net.au [202.12.71.110]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA05144; Tue, 1 Dec 1998 15:44:47 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Received: from dingo.cdrom.com (localhost [127.0.0.1]) by dingo.cdrom.com (8.9.1/8.8.8) with ESMTP id RAA07019; Mon, 30 Nov 1998 17:24:10 -0800 (PST) (envelope-from mike@dingo.cdrom.com) Message-Id: <199812010124.RAA07019@dingo.cdrom.com> X-Mailer: exmh version 2.0.2 2/24/98 To: Bruce Evans cc: mike@smith.net.au, current@FreeBSD.ORG, jc@irbs.com, smp@FreeBSD.ORG Subject: Re: Dog Sloooow SMP In-reply-to: Your message of "Tue, 01 Dec 1998 02:33:53 +1100." <199811301533.CAA00461@godzilla.zeta.org.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 30 Nov 1998 17:24:09 -0800 From: Mike Smith Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >> >No idea. I've received verification that fixing this for all 686-class > >> >CPUs seems to work (ie. it's OK on the Cyrix MII and doesn't appear to > >> >impact performance there), so the tests are now generalised for the > >> >entire 686-class. > >> > >> It's only OK for MII's because of various `#if 0's and `#ifdef SMP's > >> that prevent non-OK code from running on MII's. > > > >Care to comment on which operations aren't OK? I did ask for this in > >the review phase, with no feedback. > > Most wrmsr()s and rdmsr()s. I must admit I'd hoped that you would interpret this as "please identify those operations that are not OK". It's obvious that some are and some aren't, but not actually identifying *which* ones is not helpful. -- \\ Sometimes you're ahead, \\ Mike Smith \\ sometimes you're behind. \\ mike@smith.net.au \\ The race is long, and in the \\ msmith@freebsd.org \\ end it's only with yourself. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Fri Dec 4 18:04:09 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA21281 for freebsd-smp-outgoing; Fri, 4 Dec 1998 18:04:09 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from arthur.caida.org (arthur.caida.org [204.212.46.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA21276 for ; Fri, 4 Dec 1998 18:04:06 -0800 (PST) (envelope-from dwm@arthur.caida.org) Received: from arthur.caida.org (localhost.caida.org [127.0.0.1]) by arthur.caida.org (8.9.0/8.9.0.Beta5) with ESMTP id UAA05932 for ; Fri, 4 Dec 1998 20:03:49 -0600 (CST) Message-Id: <199812050203.UAA05932@arthur.caida.org> To: freebsd-smp@FreeBSD.ORG Subject: Tyan Thunder 100 Date: Fri, 04 Dec 1998 21:03:49 -0500 From: Daniel McRobb Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm looking to build a new machine and am wondering if anyone is using the Tyan S1836DLU Thunder 100 with 2 400MHz Pentium II processors. I don't want an Asus board (which I've seen mentioned on this list) because there aren't enough available slots. Also, does the Thunder's on-board SCSI work with the ahc driver (freeing up a slot I would normally put a SCSI adapter in)? Daniel ~~~~~~ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Fri Dec 4 18:23:50 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA23069 for freebsd-smp-outgoing; Fri, 4 Dec 1998 18:23:50 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from root.com (root.com [198.145.90.17]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA23064 for ; Fri, 4 Dec 1998 18:23:49 -0800 (PST) (envelope-from root@root.com) Received: from root.com (localhost [127.0.0.1]) by root.com (8.8.8/8.8.5) with ESMTP id SAA12236; Fri, 4 Dec 1998 18:24:50 -0800 (PST) Message-Id: <199812050224.SAA12236@root.com> To: Daniel McRobb cc: freebsd-smp@FreeBSD.ORG Subject: Re: Tyan Thunder 100 In-reply-to: Your message of "Fri, 04 Dec 1998 21:03:49 EST." <199812050203.UAA05932@arthur.caida.org> From: David Greenman Reply-To: dg@root.com Date: Fri, 04 Dec 1998 18:24:50 -0800 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >I'm looking to build a new machine and am wondering if anyone is using >the Tyan S1836DLU Thunder 100 with 2 400MHz Pentium II processors. I >don't want an Asus board (which I've seen mentioned on this list) >because there aren't enough available slots. Also, does the Thunder's >on-board SCSI work with the ahc driver (freeing up a slot I would >normally put a SCSI adapter in)? I'm using the S1836DLUAN with two 450Mhz processors. It's been working fine. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Fri Dec 4 19:41:16 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id TAA29132 for freebsd-smp-outgoing; Fri, 4 Dec 1998 19:41:16 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from arthur.caida.org (arthur.caida.org [204.212.46.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id TAA29049 for ; Fri, 4 Dec 1998 19:41:14 -0800 (PST) (envelope-from dwm@arthur.caida.org) Received: from arthur.caida.org (localhost.caida.org [127.0.0.1]) by arthur.caida.org (8.9.0/8.9.0.Beta5) with ESMTP id VAA06167; Fri, 4 Dec 1998 21:40:47 -0600 (CST) Message-Id: <199812050340.VAA06167@arthur.caida.org> Location: CAIDA Ann Arbor, MI To: dg@root.com cc: Daniel McRobb , freebsd-smp@FreeBSD.ORG Subject: Re: Tyan Thunder 100 In-reply-to: Message from of Fri Dec 4, 1998 18:24 PST <199812050224.SAA12236@root.com> Date: Fri, 04 Dec 1998 22:40:47 -0500 From: Daniel McRobb Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >I'm looking to build a new machine and am wondering if anyone is using > >the Tyan S1836DLU Thunder 100 with 2 400MHz Pentium II processors. I > >don't want an Asus board (which I've seen mentioned on this list) > >because there aren't enough available slots. Also, does the Thunder's > >on-board SCSI work with the ahc driver (freeing up a slot I would > >normally put a SCSI adapter in)? > > I'm using the S1836DLUAN with two 450Mhz processors. It's been working > fine. > > -DG Are you using the on-board SCSI? Daniel ~~~~~~ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Fri Dec 4 21:07:23 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA06856 for freebsd-smp-outgoing; Fri, 4 Dec 1998 21:07:23 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from root.com (root.com [198.145.90.17]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA06851 for ; Fri, 4 Dec 1998 21:07:21 -0800 (PST) (envelope-from root@root.com) Received: from root.com (localhost [127.0.0.1]) by root.com (8.8.8/8.8.5) with ESMTP id VAA14615; Fri, 4 Dec 1998 21:08:21 -0800 (PST) Message-Id: <199812050508.VAA14615@root.com> To: Daniel McRobb cc: freebsd-smp@FreeBSD.ORG Subject: Re: Tyan Thunder 100 In-reply-to: Your message of "Fri, 04 Dec 1998 22:40:47 EST." <199812050340.VAA06167@arthur.caida.org> From: David Greenman Reply-To: dg@root.com Date: Fri, 04 Dec 1998 21:08:21 -0800 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >> >I'm looking to build a new machine and am wondering if anyone is using >> >the Tyan S1836DLU Thunder 100 with 2 400MHz Pentium II processors. I >> >don't want an Asus board (which I've seen mentioned on this list) >> >because there aren't enough available slots. Also, does the Thunder's >> >on-board SCSI work with the ahc driver (freeing up a slot I would >> >normally put a SCSI adapter in)? >> >> I'm using the S1836DLUAN with two 450Mhz processors. It's been working >> fine. >> >> -DG > >Are you using the on-board SCSI? Yes. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sat Dec 5 05:25:48 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA10308 for freebsd-smp-outgoing; Sat, 5 Dec 1998 05:25:48 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from solaris.matti.ee (solaris.matti.ee [194.126.98.135]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA10296 for ; Sat, 5 Dec 1998 05:25:40 -0800 (PST) (envelope-from vallo@myhakas.matti.ee) Received: from myhakas.matti.ee (myhakas [194.126.98.150]) by solaris.matti.ee (8.8.8/8.8.8.s) with ESMTP id PAA11511 for ; Sat, 5 Dec 1998 15:25:16 +0200 (EET) Received: (from vallo@localhost) by myhakas.matti.ee (8.9.1/8.9.1) id PAA00969 for freebsd-smp@FreeBSD.ORG; Sat, 5 Dec 1998 15:25:22 +0200 (EET) (envelope-from vallo) Message-ID: <19981205152521.A900@matti.ee> Date: Sat, 5 Dec 1998 15:25:21 +0200 From: Vallo Kallaste To: freebsd-smp@FreeBSD.ORG Subject: Re: Tyan Thunder 100 Reply-To: vallo@matti.ee References: <199812050203.UAA05932@arthur.caida.org> <199812050224.SAA12236@root.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i In-Reply-To: <199812050224.SAA12236@root.com>; from David Greenman on Fri, Dec 04, 1998 at 06:24:50PM -0800 Organization: =?iso-8859-1?Q?AS_Matti_B=FCrootehnika?= Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org David Greenman wrote: > >because there aren't enough available slots. Also, does the Thunder's > >on-board SCSI work with the ahc driver (freeing up a slot I would > >normally put a SCSI adapter in)? > > I'm using the S1836DLUAN with two 450Mhz processors. It's been working > fine. I can confirm. I'm using two 400Mhz processors. Onboard SCSI works well, too. Vallo Kallaste vallo@matti.ee To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Sat Dec 5 08:36:42 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA20306 for freebsd-smp-outgoing; Sat, 5 Dec 1998 08:36:42 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from ns3.redbacknetworks.com (mail3.redbacknetworks.com [155.53.200.100]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA20301 for ; Sat, 5 Dec 1998 08:36:41 -0800 (PST) (envelope-from sam@redbacknetworks.com) Received: from phred.redbacknetworks.com (phred.redbacknetworks.com [155.53.144.35]) by ns3.redbacknetworks.com (8.8.8/8.8.8) with ESMTP id IAA16619 for ; Sat, 5 Dec 1998 08:36:39 -0800 (PST) Received: (from sam@localhost) by phred.redbacknetworks.com (8.8.5/8.8.5) id IAA07988; Sat, 5 Dec 1998 08:35:54 -0800 (PST) Date: Sat, 5 Dec 1998 08:35:54 -0800 (PST) Message-Id: <199812051635.IAA07988@phred.redbacknetworks.com> From: Sam Pigg To: freebsd-smp@FreeBSD.ORG Subject: Re: Tyan Thunder 100 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> >because there aren't enough available slots. Also, does the Thunder's >> >on-board SCSI work with the ahc driver (freeing up a slot I would >> >normally put a SCSI adapter in)? >> >> I'm using the S1836DLUAN with two 450Mhz processors. It's been working >> fine. > >I can confirm. I'm using two 400Mhz processors. Onboard SCSI works >well, too. Are any of you using it with >512 megs of ram? I still cannot get it to function correctly with freebsd (still freezes, hangs etc). Works fine with windblows. Yes I've checked the simms in different combinations and even replaced all the memory. Any combination larger than 512M will not work with freebsd. -Sam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message