From owner-freebsd-stable Sun Nov 8 01:02:18 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA16447 for freebsd-stable-outgoing; Sun, 8 Nov 1998 01:02:18 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from freeway.dcfinc.com (cx74889-a.phnx3.az.home.com [24.1.193.157]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id BAA16441 for ; Sun, 8 Nov 1998 01:02:16 -0800 (PST) (envelope-from chad@freeway.dcfinc.com) Received: (from chad@localhost) by freeway.dcfinc.com (8.8.8/8.8.8) id CAA00299 for stable@freebsd.org; Sun, 8 Nov 1998 02:02:01 -0700 (MST) (envelope-from chad) From: "Chad R. Larson" Message-Id: <199811080902.CAA00299@freeway.dcfinc.com> Subject: Ultra SCSI To: stable@FreeBSD.ORG Date: Sun, 8 Nov 1998 02:02:01 -0700 (MST) Reply-to: chad@REZsolutions.com X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, gang. I'm building a new machine. It has an Intel RU440FX motherboard, with an embedded Ultra Fast/Wide SCSI controller built with the Adaptec 7880 chip set. It also has two Ultra Fast/Wide SCSI disk drives. Here's the output of a "grep ahc0 /var/run/dmesg.boot", after booting with the -v flag: -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= ahc0 rev 0 int a irq 11 on pci0:13:0 ahc0: Reading SEEPROM...checksum error ahc0: No SEEPROM available ahc0: Using left over BIOS settings ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 367 instructions downloaded ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 using 16Bit transfers ahc0: target 0 synchronous at 10.0MHz, offset = 0x8 ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "IBM DORS-32160W WA6A" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2063MB (4226725 512 byte sectors) sd0(ahc0:0:0): with 6703 cyls, 5 heads, and an average 126 sectors/track ahc0: target 1 using 16Bit transfers ahc0: target 1 synchronous at 10.0MHz, offset = 0x8 ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "CONNER CFP2107E 2.14GB 1524" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 2048MB (4194304 512 byte sectors) sd1(ahc0:1:0): with 3999 cyls, 10 heads, and an average 104 sectors/track -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= First curiosity: "Using left over BIOS settings". What's that mean to an average boy? Then: "synchronous at 10.0MHz"..."using 16Bit transfers". I take that to mean we're getting 20 Megabytes/second at the interface. Pretty spiffy. But isn't Ultra SCSI supposed to clock at 20MHz? I want my MTV...er, I mean 40 Mbytes/sec. Just in case those leftover BIOS settings have anything to contribute, I set the BIOS to allow 40 Mb/s. No difference. Anyone wanna offer clues/advice? -crl -- Chad R. Larson (CRL22) Anasazi, Inc. 602-870-3330 chad@anasazi.com chad@rezsolutions.com chad@dcfinc.com 7500 North Dreamy Draw Drive, Suite 120, Phoenix, Az 85020 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Nov 8 04:19:17 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA06052 for freebsd-stable-outgoing; Sun, 8 Nov 1998 04:19:17 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA06047 for ; Sun, 8 Nov 1998 04:19:15 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from we.lc.ehu.es by polaris.we.lc.ehu.es (SMI-8.6/SMI-SVR4) id NAA14879; Sun, 8 Nov 1998 13:18:47 +0100 Message-ID: <36458C27.2E3E52BC@we.lc.ehu.es> Date: Sun, 08 Nov 1998 13:18:47 +0100 From: "José Mª Alcaide" Organization: Universidad del País Vasco - Dept. Electricidad y Electrónica X-Mailer: Mozilla 4.06 [en] (X11; I; FreeBSD 2.2.7-STABLE i386) MIME-Version: 1.0 To: chad@REZsolutions.com CC: stable@FreeBSD.ORG Subject: Re: Ultra SCSI References: <199811080902.CAA00299@freeway.dcfinc.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Chad R. Larson wrote: > I'm building a new machine. It has an Intel RU440FX motherboard, > with an embedded Ultra Fast/Wide SCSI controller built with the > Adaptec 7880 chip set. > > It also has two Ultra Fast/Wide SCSI disk drives. Here's the output > of a "grep ahc0 /var/run/dmesg.boot", after booting with the -v > flag: > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > ahc0 rev 0 int a irq 11 on pci0:13:0 > ahc0: Reading SEEPROM...checksum error > ahc0: No SEEPROM available What's the FreeBSD version you are using? I had a similar problem with 2.2.6-RELEASE. The motherboard was (and is) an Iwill PIILS, and the cause was that the serial EEPROM on the mb is a C56 o C66, but the AHC driver supposed it has to be a C46 (which is the SEEPROM used in the Adaptec 2940 cards). The problem was fixed in later versions of /usr/src/sys/pci/aic7870.c (currently is 1.41.2.10 for -STABLE). Hope this helps, -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | http://www.we.lc.ehu.es/~jose Dpto. de Electricidad y Electrónica | Facultad de Ciencias - Campus de Lejona | Tel.: +34-944647700 x2624 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-944858139 ----------------------------------------------------------------------- "Go ahead... make my day." - H. Callahan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Nov 8 16:22:09 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id QAA13148 for freebsd-stable-outgoing; Sun, 8 Nov 1998 16:22:09 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from freeway.dcfinc.com (cx74889-a.phnx3.az.home.com [24.1.193.157]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id QAA13139 for ; Sun, 8 Nov 1998 16:22:07 -0800 (PST) (envelope-from chad@freeway.dcfinc.com) Received: (from chad@localhost) by freeway.dcfinc.com (8.8.8/8.8.8) id RAA00316; Sun, 8 Nov 1998 17:21:04 -0700 (MST) (envelope-from chad) From: "Chad R. Larson" Message-Id: <199811090021.RAA00316@freeway.dcfinc.com> Subject: Re: Ultra SCSI In-Reply-To: <36458C27.2E3E52BC@we.lc.ehu.es> from =?ISO-8859-1?Q?Jos=E9_M=AA_Alcaide?= at "Nov 8, 98 01:18:47 pm" To: jose@we.lc.ehu.es (José Mª Alcaide) Date: Sun, 8 Nov 1998 17:21:04 -0700 (MST) Cc: stable@FreeBSD.ORG Reply-to: chad@DCFinc.com X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG As I recall, Jose Alcaide wrote: > Chad R. Larson wrote: > > I'm building a new machine. It has an Intel RU440FX motherboard, > > with an embedded Ultra Fast/Wide SCSI controller built with the > > Adaptec 7880 chip set. > > > > It also has two Ultra Fast/Wide SCSI disk drives. Here's the output > > of a "grep ahc0 /var/run/dmesg.boot", after booting with the -v > > flag: > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > > ahc0 rev 0 int a irq 11 on pci0:13:0 > > ahc0: Reading SEEPROM...checksum error > > ahc0: No SEEPROM available > > What's the FreeBSD version you are using? I had a similar problem with > 2.2.6-RELEASE. The motherboard was (and is) an Iwill PIILS, and the > cause was that the serial EEPROM on the mb is a C56 o C66, but the > AHC driver supposed it has to be a C46 (which is the SEEPROM used > in the Adaptec 2940 cards). The problem was fixed in later versions > of /usr/src/sys/pci/aic7870.c (currently is 1.41.2.10 for -STABLE). > > Hope this helps, > -- JMA I'm using 2.2-STABLE (CVSup'd last week). -crl -- Chad R. Larson (CRL15) 602-953-1392 Brother, can you paradigm? chad@dcfinc.com chad@larsons.org chad@anasazi.com larson1@home.net DCF, Inc. - 14623 North 49th Place, Scottsdale, Arizona 85254-2207 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sun Nov 8 20:23:32 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA06530 for freebsd-stable-outgoing; Sun, 8 Nov 1998 20:23:32 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from marathon.simons-rock.edu (marathon.simons-rock.edu [208.144.215.19]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id UAA06494 for ; Sun, 8 Nov 1998 20:23:27 -0800 (PST) (envelope-from psion@geekspace.com) Received: (qmail 20175 invoked from network); 9 Nov 1998 05:19:39 -0000 Received: from cwilliams.student.simons-rock.edu (HELO geekspace.com) (207.51.114.13) by marathon.simons-rock.edu with SMTP; 9 Nov 1998 05:19:39 -0000 Message-ID: <364669F0.F859EFBB@geekspace.com> Date: Sun, 08 Nov 1998 23:05:04 -0500 From: Chris Williams X-Mailer: Mozilla 4.5 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-stable@FreeBSD.ORG Subject: tcpdump bringing down machine!?! Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I had tcpdump running, dumping to a file on its very own seperate slice. It apparently filled up the slice, and that slowly brought the machine down until it rebooted itself...WHY? I mean, I know it was a stupid thing to let happen, but why didn't tcpdump just quit, and how did it start bringing down other things? Here is df afterwords: /dev/wd0s1a 254302 32306 201652 14% / /dev/wd0s1f 4069342 1708272 2035524 46% /usr /dev/wd0s1e 254302 5278 228680 2% /var /dev/wd0s1g 1017310 1017282 -81356 109% /dump procfs 8 8 0 100% /proc And here is from /var/log/messages: Nov 8 00:30:06 jello /kernel: ed1: promiscuous mode enabled Nov 8 02:58:46 jello /kernel: pid 22236 (tcpdump), uid 0 on /dump: file system full Nov 8 02:59:17 jello last message repeated 2531 times Nov 8 03:01:18 jello last message repeated 10241 times ...[lots of messages like this]... Nov 8 08:51:30 jello last message repeated 1251 times Nov 8 08:59:14 jello last message repeated 630 times Nov 8 08:59:32 jello /kernel: pid 22700 (genesis), uid 1001: exited on signal 1 Nov 8 08:59:38 jello /kernel: pid 22236 (tcpdump), uid 0 on /dump: file system full Nov 8 09:00:00 jello /kernel: pid 22702 (cron), uid 0: exited on signal 11 Nov 8 09:00:00 jello /kernel: pid 22701 (cron), uid 0: exited on signal 11 Nov 8 09:00:04 jello /kernel: pid 22236 (tcpdump), uid 0 on /dump: file system full Nov 8 09:00:53 jello last message repeated 2 times Nov 8 09:02:46 jello last message repeated 34 times ...[more of same, more cron failures]... Nov 8 12:37:49 jello last message repeated 32 times Nov 8 12:38:49 jello last message repeated 3 times Nov 8 12:39:01 jello /kernel: pid 22756 (moo), uid 1001: exited on signal 11 Nov 8 12:39:01 jello /kernel: pid 207 (moo), uid 1001: exited on signal 11 Nov 8 12:39:01 jello /kernel: pid 19016 (moo), uid 1001: exited on signal 11 Nov 8 12:39:01 jello init: fatal signal: Segmentation fault Nov 8 12:39:01 jello /kernel: pid 22236 (tcpdump), uid 0 on /dump: file system full Nov 8 12:39:02 jello /kernel: pid 22255 (xterm), uid 0: exited on signal 11 Nov 8 12:39:02 jello /kernel: pid 19097 (xterm), uid 0: exited on signal 11 (co re dumped) Nov 8 12:39:14 jello /kernel: pid 22236 (tcpdump), uid 0 on /dump: file system full !!![reboot]!!! Nov 8 12:40:47 jello /kernel: Copyright (c) 1992-1998 FreeBSD Inc. -- -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS/IT/M/P/S d?- s+:- a17>? C++++$ UBLS++$>++++ P--- L++>+++ E---- W+++$ N- !o K? w@$ !O M-- V-- PS+++ PE Y+ PGP- t+ 5-(++) X+ R+ tv>! b+++ DI+++ D+ G++ e* h!*>++ r%>++ !y->$ ------END GEEK CODE BLOCK------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 03:16:26 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id DAA15720 for freebsd-stable-outgoing; Mon, 9 Nov 1998 03:16:26 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id DAA15666 for ; Mon, 9 Nov 1998 03:16:01 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from we.lc.ehu.es by polaris.we.lc.ehu.es (SMI-8.6/SMI-SVR4) id MAA16730; Mon, 9 Nov 1998 12:13:36 +0100 Message-ID: <3646CE60.17C9E019@we.lc.ehu.es> Date: Mon, 09 Nov 1998 12:13:36 +0100 From: "José Mª Alcaide" Organization: Universidad del País Vasco - Dept. de Electricidad y Electrónica X-Mailer: Mozilla 4.06 [en] (X11; I; FreeBSD 2.2.7-STABLE i386) MIME-Version: 1.0 To: chad@DCFinc.com CC: stable@FreeBSD.ORG Subject: Re: Ultra SCSI References: <199811090021.RAA00316@freeway.dcfinc.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Chad R. Larson wrote: > > As I recall, Jose Alcaide wrote: > > Chad R. Larson wrote: > > > I'm building a new machine. It has an Intel RU440FX motherboard, > > > with an embedded Ultra Fast/Wide SCSI controller built with the > > > Adaptec 7880 chip set. > > > > > > It also has two Ultra Fast/Wide SCSI disk drives. Here's the output > > > of a "grep ahc0 /var/run/dmesg.boot", after booting with the -v > > > flag: > > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > > > ahc0 rev 0 int a irq 11 on pci0:13:0 > > > ahc0: Reading SEEPROM...checksum error > > > ahc0: No SEEPROM available > > > > What's the FreeBSD version you are using? I had a similar problem with > > 2.2.6-RELEASE. The motherboard was (and is) an Iwill PIILS, and the > > cause was that the serial EEPROM on the mb is a C56 o C66, but the > > AHC driver supposed it has to be a C46 (which is the SEEPROM used > > in the Adaptec 2940 cards). The problem was fixed in later versions > > of /usr/src/sys/pci/aic7870.c (currently is 1.41.2.10 for -STABLE). > > I'm using 2.2-STABLE (CVSup'd last week). > Perhaps your motherboard doesn't have a SEEPROM, or it uses a completely different type. If you don't hesitate to fiddle with the kernel sources, you may insert some printf's in relevant positions of sys/pci/aic7870.c, and see what happens when trying to read the SEEPROM... The relevant portion of this file is the function "load_seeprom", which starts at line #666 (mmm... this number reminds me of someone... :-) ). -- JMA ----------------------------------------------------------------------- José Mª Alcaide | mailto:jose@we.lc.ehu.es Universidad del País Vasco | http://www.we.lc.ehu.es/~jose Dpto. de Electricidad y Electrónica | Facultad de Ciencias - Campus de Lejona | Tel.: +34-946012479 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-944858139 ----------------------------------------------------------------------- "Go ahead... make my day." - H. Callahan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 05:34:44 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id FAA02198 for freebsd-stable-outgoing; Mon, 9 Nov 1998 05:34:44 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from macon.informatik.uni-tuebingen.de (macon2.Informatik.Uni-Tuebingen.De [134.2.13.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id FAA02188 for ; Mon, 9 Nov 1998 05:34:19 -0800 (PST) (envelope-from sperber@brabantio.informatik.uni-tuebingen.de) Received: from brabantio.informatik.uni-tuebingen.de (brabantio.Informatik.Uni-Tuebingen.De [134.2.12.25]) by macon.informatik.uni-tuebingen.de (8.9.1/8.9.1) with ESMTP id JAA13468; Mon, 9 Nov 1998 09:43:55 +0100 Received: (from sperber@localhost) by brabantio.informatik.uni-tuebingen.de (AIX4.2/UCB 8.7/8.7) id JAA12740; Mon, 9 Nov 1998 09:39:33 +0100 (MET) To: dag-erli@ifi.uio.no (Dag-Erling C. =?ISO-8859-1?Q?Sm=F8rgrav?= ) Cc: freebsd-stable@FreeBSD.ORG Subject: Re: CPU halts using mpg123 and OSS References: <199810142222.PAA00592@B1FF.nas.nasa.gov> Mime-Version: 1.0 (generated by tm-edit 1.4) Content-Type: text/plain; charset=ISO-8859-1 From: sperber@Informatik.Uni-Tuebingen.De (Michael Sperber [Mr. Preprocessor]) Date: 09 Nov 1998 09:39:31 +0100 In-Reply-To: dag-erli@ifi.uio.no's message of "06 Nov 1998 23:59:01 +0100" Message-ID: Lines: 21 X-Mailer: Gnus v5.6.33/XEmacs 21.0 - "Irish Goat" Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id FAA02192 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >>>>> "DES" == Dag-Erling C Smørgrav writes: DES> sperber@Informatik.Uni-Tuebingen.De (Michael Sperber [Mr. Preprocessor]) writes: >> Here's what the OSS people have to say on problems with OSS on >> FreeBSD. Can anyone in the know clarify what the status is? I >> couldn't find anything in the freebsd-bugs archive, but maybe I don't >> know where to look. DES> Ask them what they mean by "notifying the kernel group", and whether DES> they have submitted a PR. My guess is they haven't. I'd checked that there was no PR obviously related to this, that's why I posted. The OSS people also mentioned that they'd mailed Jordan directly. Should I badger them some more to send a PR, or can Jordan comment? -- Cheers =8-} Mike Friede, Völkerverständigung und überhaupt blabla To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 06:17:16 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA06242 for freebsd-stable-outgoing; Mon, 9 Nov 1998 06:17:16 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from ifi.uio.no (ifi.uio.no [129.240.64.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA05610 for ; Mon, 9 Nov 1998 06:10:07 -0800 (PST) (envelope-from dag-erli@ifi.uio.no) Received: from sida.ifi.uio.no (2602@sida.ifi.uio.no [129.240.64.152]) by ifi.uio.no (8.8.8/8.8.7/ifi0.2) with SMTP id PAA23855; Mon, 9 Nov 1998 15:09:33 +0100 (MET) Received: from localhost (dag-erli@localhost) by sida.ifi.uio.no ; Mon, 9 Nov 1998 14:09:32 GMT Mime-Version: 1.0 To: sperber@Informatik.Uni-Tuebingen.De (Michael Sperber [Mr. Preprocessor]) Cc: freebsd-stable@FreeBSD.ORG Subject: Re: CPU halts using mpg123 and OSS References: <199810142222.PAA00592@B1FF.nas.nasa.gov> Organization: University of Oslo, Department of Informatics X-url: http://www.stud.ifi.uio.no/~dag-erli/ X-other-addresses: 'finger dag-erli@ifi.uio.no' for a list X-disclaimer-1: The views expressed in this article are mine alone, and do X-disclaimer-2: not necessarily coincide with those of any organisation or X-disclaimer-3: company with which I am or have been affiliated. X-Stop-Spam: http://www.cauce.org/ From: dag-erli@ifi.uio.no (Dag-Erling C. =?iso-8859-1?Q?Sm=F8rgrav?= ) Date: 09 Nov 1998 15:09:29 +0100 In-Reply-To: sperber@Informatik.Uni-Tuebingen.De's message of "09 Nov 1998 09:39:31 +0100" Message-ID: Lines: 18 X-Mailer: Gnus v5.5/Emacs 19.34 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id GAA06238 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG sperber@Informatik.Uni-Tuebingen.De (Michael Sperber [Mr. Preprocessor]) writes: > >>>>> "DES" == Dag-Erling C Smørgrav writes: > DES> Ask them what they mean by "notifying the kernel group", and whether > DES> they have submitted a PR. My guess is they haven't. > I'd checked that there was no PR obviously related to this, that's why > I posted. The OSS people also mentioned that they'd mailed Jordan > directly. Should I badger them some more to send a PR, or can Jordan > comment? The one and only way of reporting bugs in FreeBSD is to file a PR, which I'm sure Jordan told them if they mailed him... I doubt very much that mailing a bug report to Jordan will get it fixed any quicker than filing a PR about it, unless he happens to have time to look into it himself. DES -- Dag-Erling Smørgrav - dag-erli@ifi.uio.no To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 08:18:23 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA20614 for freebsd-stable-outgoing; Mon, 9 Nov 1998 08:18:23 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id IAA20549 for ; Mon, 9 Nov 1998 08:17:37 -0800 (PST) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id PAA28024 for stable@freebsd.org; Mon, 9 Nov 1998 15:15:47 +0100 From: Luigi Rizzo Message-Id: <199811091415.PAA28024@labinfo.iet.unipi.it> Subject: acd driver in -stable To: stable@FreeBSD.ORG Date: Mon, 9 Nov 1998 15:15:47 +0100 (MET) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have finally imported Soren's "acd" driver in -stable. Among other things, this adds support for ATAPI burners through "wormcontrol". Could people please try it and report any problems ? You need to build a kernel with "device acd0" instead of "device wcd0". For burning disks, you need to recompile and reinstall wormcontrol and see the wormcontrol manpage. cheers luigi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 10:23:32 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA03088 for freebsd-stable-outgoing; Mon, 9 Nov 1998 10:23:32 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from time.cdrom.com (time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA03078 for ; Mon, 9 Nov 1998 10:23:30 -0800 (PST) (envelope-from jkh@time.cdrom.com) Received: from time.cdrom.com (jkh@localhost.cdrom.com [127.0.0.1]) by time.cdrom.com (8.8.8/8.8.8) with ESMTP id JAA07620; Mon, 9 Nov 1998 09:19:03 -0800 (PST) (envelope-from jkh@time.cdrom.com) To: sperber@Informatik.Uni-Tuebingen.De (Michael Sperber [Mr. Preprocessor]) cc: dag-erli@ifi.uio.no (Dag-Erling C. =?ISO-8859-1?Q?Sm=F8rgrav?= ), freebsd-stable@FreeBSD.ORG Subject: Re: CPU halts using mpg123 and OSS In-reply-to: Your message of "09 Nov 1998 09:39:31 +0100." Date: Mon, 09 Nov 1998 09:19:03 -0800 Message-ID: <7616.910631943@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I'd checked that there was no PR obviously related to this, that's why > I posted. The OSS people also mentioned that they'd mailed Jordan > directly. Should I badger them some more to send a PR, or can Jordan > comment? We've probably escallated it as much as it can be within the core team and someone will either manage to fix it or, well I dunno. :-) It would be nice if any of the other members of -hackers wished to get involved, of course, and I've already sent out mail to the OSS folks asking that they widen their search a little. - Jordan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Mon Nov 9 11:23:55 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA10195 for freebsd-stable-outgoing; Mon, 9 Nov 1998 11:23:55 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from pop.uniserve.com (pop.uniserve.com [204.244.156.3]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id LAA10186 for ; Mon, 9 Nov 1998 11:23:53 -0800 (PST) (envelope-from tom@uniserve.com) Received: from shell.uniserve.ca [204.244.186.218] by pop.uniserve.com with smtp (Exim 1.82 #4) id 0zcwuP-000393-00; Mon, 9 Nov 1998 11:23:30 -0800 Date: Mon, 9 Nov 1998 11:23:27 -0800 (PST) From: Tom X-Sender: tom@shell.uniserve.ca To: Chris Williams cc: freebsd-stable@FreeBSD.ORG Subject: Re: tcpdump bringing down machine!?! In-Reply-To: <364669F0.F859EFBB@geekspace.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 8 Nov 1998, Chris Williams wrote: > I had tcpdump running, dumping to a file on its very own seperate slice. > It apparently filled up the slice, and that slowly brought the machine > down until it rebooted itself...WHY? Probably because since tcpdump was unable to write out data, it wasn't processing new packets either. Most likely this created a backlog and ate all all your mbufs (see netstat -m). Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Nov 10 08:52:36 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA15906 for freebsd-stable-outgoing; Tue, 10 Nov 1998 08:52:36 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from nyx.digitaladdiction.com (nyx.digitaladdiction.com [207.239.226.70]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA15888 for ; Tue, 10 Nov 1998 08:52:29 -0800 (PST) (envelope-from deker@digitaladdiction.com) Received: from localhost (deker@localhost) by nyx.digitaladdiction.com (8.9.1/8.8.8) with SMTP id LAA09632 for ; Tue, 10 Nov 1998 11:51:52 -0500 (EST) (envelope-from deker@digitaladdiction.com) X-Authentication-Warning: nyx.digitaladdiction.com: deker owned process doing -bs Date: Tue, 10 Nov 1998 11:51:52 -0500 (EST) From: Rob Deker To: FreeBSD Stable Subject: Questions about in.h and inet.h Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I sent this to freebsd-questions and got nothing back, so I thought I'd try here. Apologies to thos seeing this again. So, I'm trying to compile DaVinci (a big IRC botlike thing) on a machine running 3.0-RELEASE and it uses /usr/include/netinet/in.h and /usr/include/arpa/inet.h. No big deal right? Well, gcc seems to think that these header files are broken. To prove that I wasn't on crack, I wrote the following stupid little bit of code: #include #include main() {} an tried to compile it. What I got back was: In file included from foo.c:1: /usr/include/netinet/in.h:223: parse error before `u_int32_t' /usr/include/netinet/in.h:223: warning: no semicolon at end of struct or union /usr/include/netinet/in.h:275: parse error before `u_char' /usr/include/netinet/in.h:275: warning: no semicolon at end of struct or union /usr/include/netinet/in.h:276: warning: data definition has no type or storage class /usr/include/netinet/in.h:277: parse error before `sin_port' /usr/include/netinet/in.h:277: warning: data definition has no type or storage class /usr/include/netinet/in.h:280: parse error before `}' /usr/include/netinet/in.h:290: field `ip_dst' has incomplete type /usr/include/netinet/in.h:337: field `imr_multiaddr' has incomplete type /usr/include/netinet/in.h:338: field `imr_interface' has incomplete type In file included from foo.c:2: /usr/include/arpa/inet.h:89: warning: parameter has incomplete type /usr/include/arpa/inet.h:92: warning: parameter has incomplete type /usr/include/arpa/inet.h:96: warning: parameter has incomplete type /usr/include/netinet/in.h:278: storage size of `sin_addr' isn't known I've looked over the header files and don't see anything really wrong with them (ObAdmission: I'm no coder). Am I really smoking crack here or is something wrong with these header files? thanks rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Nov 10 09:19:36 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA20063 for freebsd-stable-outgoing; Tue, 10 Nov 1998 09:19:36 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from mailhost.iprg.nokia.com (mailhost.iprg.nokia.com [205.226.5.12]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA20056 for ; Tue, 10 Nov 1998 09:19:30 -0800 (PST) (envelope-from scott@iprg.nokia.com) Received: from melkor.iprg.nokia.com (melkor.iprg.nokia.com [205.226.1.82]) by mailhost.iprg.nokia.com (8.8.8/8.6.10) with SMTP id JAA04067; Tue, 10 Nov 1998 09:18:39 -0800 (PST) Message-ID: <3648756E.52BFA1D7@iprg.nokia.com> Date: Tue, 10 Nov 1998 09:18:38 -0800 From: Scott Sewall Organization: Nokia Communications X-Mailer: Mozilla 3.04Gold (X11; U; FreeBSD 2.2.6-RELEASE i386) MIME-Version: 1.0 To: Rob Deker CC: FreeBSD Stable Subject: Re: Questions about in.h and inet.h References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Add #include before the other includes. -- Scott Rob Deker wrote: > > I sent this to freebsd-questions and got nothing back, so I thought I'd > try here. Apologies to thos seeing this again. > > So, I'm trying to compile DaVinci (a big IRC botlike thing) on a > machine running 3.0-RELEASE and it uses /usr/include/netinet/in.h and > /usr/include/arpa/inet.h. No big deal right? > > Well, gcc seems to think that these header files are broken. To prove that > I wasn't on crack, I wrote the following stupid little bit of code: > > #include > #include > > main() {} > > an tried to compile it. What I got back was: > > In file included from foo.c:1: > /usr/include/netinet/in.h:223: parse error before `u_int32_t' > /usr/include/netinet/in.h:223: warning: no semicolon at end of struct or > union > /usr/include/netinet/in.h:275: parse error before `u_char' > /usr/include/netinet/in.h:275: warning: no semicolon at end of struct or > union > /usr/include/netinet/in.h:276: warning: data definition has no type or > storage class > /usr/include/netinet/in.h:277: parse error before `sin_port' > /usr/include/netinet/in.h:277: warning: data definition has no type or > storage class > /usr/include/netinet/in.h:280: parse error before `}' > /usr/include/netinet/in.h:290: field `ip_dst' has incomplete type > /usr/include/netinet/in.h:337: field `imr_multiaddr' has incomplete type > /usr/include/netinet/in.h:338: field `imr_interface' has incomplete type > In file included from foo.c:2: > /usr/include/arpa/inet.h:89: warning: parameter has incomplete type > /usr/include/arpa/inet.h:92: warning: parameter has incomplete type > /usr/include/arpa/inet.h:96: warning: parameter has incomplete type > /usr/include/netinet/in.h:278: storage size of `sin_addr' isn't known > > I've looked over the header files and don't see anything really wrong with > them (ObAdmission: I'm no coder). Am I really smoking crack here or is > something wrong with these header files? > > thanks > > rob > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Nov 10 09:21:53 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA20441 for freebsd-stable-outgoing; Tue, 10 Nov 1998 09:21:53 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from wall.polstra.com (rtrwan160.accessone.com [206.213.115.74]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA20434 for ; Tue, 10 Nov 1998 09:21:49 -0800 (PST) (envelope-from jdp@polstra.com) Received: from vashon.polstra.com (vashon.polstra.com [206.213.73.13]) by wall.polstra.com (8.9.1/8.9.1) with ESMTP id JAA10329; Tue, 10 Nov 1998 09:21:33 -0800 (PST) (envelope-from jdp@polstra.com) From: John Polstra Received: (from jdp@localhost) by vashon.polstra.com (8.9.1/8.9.1) id JAA19950; Tue, 10 Nov 1998 09:21:32 -0800 (PST) (envelope-from jdp@polstra.com) Date: Tue, 10 Nov 1998 09:21:32 -0800 (PST) Message-Id: <199811101721.JAA19950@vashon.polstra.com> To: deker@digitaladdiction.com Subject: Re: Questions about in.h and inet.h Newsgroups: polstra.freebsd.stable In-Reply-To: Organization: Polstra & Co., Seattle, WA Cc: stable@FreeBSD.ORG Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In article , Rob Deker wrote: > > I sent this to freebsd-questions and got nothing back, so I thought I'd > try here. Apologies to thos seeing this again. -hackers would have been a better second try. > So, I'm trying to compile DaVinci (a big IRC botlike thing) on a > machine running 3.0-RELEASE and it uses /usr/include/netinet/in.h and > /usr/include/arpa/inet.h. No big deal right? > > > Well, gcc seems to think that these header files are broken. To prove that > I wasn't on crack, I wrote the following stupid little bit of code: > > > #include > #include > > main() {} > > an tried to compile it. What I got back was: > > In file included from foo.c:1: > /usr/include/netinet/in.h:223: parse error before `u_int32_t' [...] Include and before the other two include files, like this: #include #include #include #include John -- John Polstra jdp@polstra.com John D. Polstra & Co., Inc. Seattle, Washington USA "Nobody ever went broke underestimating the taste of the American public." -- H. L. Mencken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Nov 10 09:33:49 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA21797 for freebsd-stable-outgoing; Tue, 10 Nov 1998 09:33:49 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from roma.coe.ufrj.br (roma.coe.ufrj.br [146.164.53.65]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA21792 for ; Tue, 10 Nov 1998 09:33:44 -0800 (PST) (envelope-from jonny@jonny.eng.br) Received: (from jonny@localhost) by roma.coe.ufrj.br (8.8.8/8.8.8) id PAA09395; Tue, 10 Nov 1998 15:16:38 -0200 (EDT) (envelope-from jonny) From: Joao Carlos Mendes Luis Message-Id: <199811101716.PAA09395@roma.coe.ufrj.br> Subject: Re: Questions about in.h and inet.h In-Reply-To: from Rob Deker at "Nov 10, 98 11:51:52 am" To: deker@digitaladdiction.com (Rob Deker) Date: Tue, 10 Nov 1998 15:16:38 -0200 (EDT) Cc: freebsd-stable@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG #define quoting(Rob Deker) // Well, gcc seems to think that these header files are broken. To prove that // I wasn't on crack, I wrote the following stupid little bit of code: // // #include // #include // // main() {} // // an tried to compile it. What I got back was: // // In file included from foo.c:1: // /usr/include/netinet/in.h:223: parse error before `u_int32_t' You forgot: #include #include Jonny -- Joao Carlos Mendes Luis M.Sc. Student jonny@jonny.eng.br Universidade Federal do Rio de Janeiro "This .sig is not meant to be politically correct." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Tue Nov 10 15:44:54 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA06216 for freebsd-stable-outgoing; Tue, 10 Nov 1998 15:44:54 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from sussie.datadesign.se (ns.datadesign.se [194.23.109.130]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA06202 for ; Tue, 10 Nov 1998 15:44:51 -0800 (PST) (envelope-from kaj@interbizz.se) Received: from localhost (sussie.datadesign.se [194.23.109.130]) by sussie.datadesign.se (8.8.5/8.8.7) with ESMTP id AAA04011; Wed, 11 Nov 1998 00:42:47 +0100 (MET) To: max@vega.pfts.com Cc: freebsd-stable@FreeBSD.ORG Cc: kaj@interbizz.se Subject: Re: calcru: negative time of -71345076 usec for pid 23891 (make) From: Rasmus Kaj In-Reply-To: Your message of "Sat, 07 Nov 1998 11:10:15 +0200" <36440E77.3758284D@vega.pfts.com> References: <36440E77.3758284D@vega.pfts.com> X-Mailer: Mew version 1.92.4 on XEmacs 20.4 (Emerald) X-URL: http://www.e.kth.se/~kaj/ X-Phone: +46 (0)8 - 692 35 09 / +46 (0)70 640 49 14 X-Attribution: Kaj X-Face: M9cR~WYav<"fu%MaslX0`43PAYY?uIsM8[#E(0\Xuy9rj>4gE\h3jm.7DD?]R8*^7T\o&vT U@[53Dwkuup4[0@gw#~kyu>`unH?kVj9CJa02(h>Ki\+i=%rn%sDf^KC.!?IHkKjMAbkd\jgmphp^' d|Q;OeXEAhq?ybGqOs1CHb6TJT42'C`Krnk61//AOfXtNjj/t'`5>Vw0QX!dKfOL$.f+S"LIuwR<;I Z0Qnnx(F^F]o@*V%TUtEV'1Z[TkOl^FFV9Z~A[b19%}uP*,huCU Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <19981111004246Z.kaj@interbizz.se> Date: Wed, 11 Nov 1998 00:42:46 +0100 X-Dispatcher: imput version 971024 Lines: 24 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >>>>> "MS" == Maxim Sobolev writes: MS> Does anybody know what does this mysterious message means? MS> calcru: negative time of -71345076 usec for pid 23891 (make) Since I haven't seen an explanatory answer to this, let me throw in a guess (so there is at lest a try for an answer) ... Is the process in fact alive a looong time, rather than very short? Then the problem might be either that calcru (which, by the way, I don't know a thing about) casts a time_t (which is a long, according to ) to an int, hence overflow, which might leed to underflow when using signed. Or it might be that the long (which is signed) overflows itself, but that would be an incredibly long time ... // Rasmus Kaj -- kaj@cityonline.se --------------- Rasmus Kaj - http://www.e.kth.se/~kaj/ \ CityOnLine IB Production AB - http://www.CityOnLine.se/ \----------------- You can't grep a window - Use a Unix! Any Unix! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Nov 11 08:02:58 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA00313 for freebsd-stable-outgoing; Wed, 11 Nov 1998 08:02:58 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from obie.softweyr.com ([204.68.178.33]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA00305 for ; Wed, 11 Nov 1998 08:02:54 -0800 (PST) (envelope-from wes@softweyr.com) Received: from softweyr.com (wes@zaphod.softweyr.com [204.68.178.35]) by obie.softweyr.com (8.8.8/8.8.8) with ESMTP id JAA19516; Wed, 11 Nov 1998 09:01:16 -0700 (MST) (envelope-from wes@softweyr.com) Message-ID: <3649B4CC.ACF9587E@softweyr.com> Date: Wed, 11 Nov 1998 09:01:16 -0700 From: Wes Peters Organization: Softweyr llc X-Mailer: Mozilla 4.5 [en] (X11; I; FreeBSD 2.2.6-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Rasmus Kaj CC: max@vega.pfts.com, freebsd-stable@FreeBSD.ORG Subject: Re: calcru: negative time of -71345076 usec for pid 23891 (make) References: <36440E77.3758284D@vega.pfts.com> <19981111004246Z.kaj@interbizz.se> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Rasmus Kaj wrote: > > >>>>> "MS" == Maxim Sobolev writes: > > MS> Does anybody know what does this mysterious message means? > > MS> calcru: negative time of -71345076 usec for pid 23891 (make) > > Since I haven't seen an explanatory answer to this, let me throw in a > guess (so there is at lest a try for an answer) ... "Use the Source, Luke!" wes@zaphod$ cd /usr/src/sys wes@zaphod$ find . -name '*.c' -print | xargs grep "negative time" ./kern/kern_clock.c: printf("hzto: negative time difference %ld sec %ld usec\n", ./kern/kern_resource.c: printf("calcru: negative time: %ld usec\n", (long)totusec); wes@zaphod$ vi kern/kern_resource.c /* * Transform the running time and tick information in proc p into user, * system, and interrupt time usage. */ void calcru(p, up, sp, ip) ... if (p == curproc) { /* * Adjust for the current time slice. This is actually fairly * important since the error here is on the order of a time * quantum, which is much greater than the sampling error. */ microtime(&tv); sec += tv.tv_sec - runtime.tv_sec; usec += tv.tv_usec - runtime.tv_usec; } totusec = (quad_t)sec * 1000000 + usec; if (totusec < 0) { /* XXX no %qd in kernel. Truncate. */ printf("calcru: negative time: %ld usec\n", (long)totusec); totusec = 0; } ... So, it looks like your process has been charged negative time during this accounting interval. I've not studied the code to determine exactly *why* this happens, or what it means, but it seems to be relatively harmless. It started happening on my 486/66 server box around 2.2.5 release. I suspect there may be a buglet in there somewhere, but it seems harmless so I just avoid using ttyv0. ;^) -- "Where am I, and what am I doing in this handbasket?" Wes Peters Softweyr LLC http://www.softweyr.com/~softweyr wes@softweyr.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Nov 11 10:52:56 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA19512 for freebsd-stable-outgoing; Wed, 11 Nov 1998 10:52:56 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from net.ganymed.org (ws5.cable.vol.at [194.183.130.5]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA19474; Wed, 11 Nov 1998 10:52:24 -0800 (PST) (envelope-from flo@ganymed.org) Received: from stone (stone.ganymed.org [192.168.2.3]) by net.ganymed.org (8.8.8/8.8.5) with SMTP id TAA01287; Wed, 11 Nov 1998 19:51:55 +0100 (CET) Message-Id: <3.0.32.19981111195130.0068d1d0@triton> X-Sender: flo@triton X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Wed, 11 Nov 1998 19:51:35 +0100 To: freebsd-current@FreeBSD.ORG From: Florian Nigsch Subject: Upgrade from 2.2-STABLE to -CURRENT Cc: freebsd-stable@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! I have experienced a little problem. In fact, it's a serious problem: :) I keep pace with the sourcecodechanges with the CVSup mechanism, and so i wanted to upgrade my FreeBSD 2.2-STABLE (2.2.7) system to -CURRENT. I read some docs and Makefiles, found out that the best i could do was to try a "make aout-to-elf" ind /usr/src. Now, what I ended up with was the following: ===> strip . . . cc -O2 -m486 -pipe -D_GNU_SOURCE -I- -I. -I/usr/src/gnu/usr.bin/binutils/strip -I/usr/src/gnu/usr.bin/binutils/strip/../libbfd/i386 -I/usr/src/gnu/usr.bin/binutils/strip/../../../../contrib/binutils/include -I/usr/src/gnu/usr.bin/binutils/strip/../libbinutils -I/usr/src/gnu/usr.bin/binutils/strip/../../../../contrib/binutils/binutils -I/usr/obj/aout/usr/src/tmp/usr/include -static -o strip objcopy.o is-strip.o -L../libbinutils -lbinutils -L../libbfd -lbfd -L../libiberty -liberty cp strip maybe_stripped strip maybe_stripped *** Error code 1 ...and five more "*** Error code 1". I don't know what to try next, so I'd appreciate any comments or recommendations in order to get rid of this problem! please email me directly at flo@ganymed.org because I'm not subscribed to freebsd-stable nor to freebsd-current. Thanks to all of you in advance, ciao, Flo ----------------------------------------------------- F. Nigsch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Nov 11 11:35:11 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA24691 for freebsd-stable-outgoing; Wed, 11 Nov 1998 11:35:11 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from houston.matchlogic.com (mail.matchlogic.com [205.216.147.127]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA24677 for ; Wed, 11 Nov 1998 11:35:05 -0800 (PST) (envelope-from jonb@matchlogic.com) Received: by HOUSTON.matchlogic.com with Internet Mail Service (5.0.1460.8) id ; Wed, 11 Nov 1998 12:34:40 -0700 Message-ID: <64003B21ECCAD11185C500805F31EC03013BD74F@HOUSTON.matchlogic.com> From: Jon Bailey To: "'freebsd-stable@freebsd.org'" Subject: When will -stable become 3.x ? Date: Wed, 11 Nov 1998 12:34:36 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.0.1460.8) Content-Type: text/plain Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG It would seem to indicate here: http://www.freebsd.org/handbook/stable.html > This is especially true if you have installed the most recent release > (3.0-RELEASE at the time of this writing) since the stable branch is > effectively a bug-fix stream relative to the previous release. that freebsd-stable should be tracking 3.0-RELEASE, but the stable-supfile at: ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/share/examples/cvsup/s table-supfile still tracks RELENG_2.2 . . . When will the move take place? If this has been answered already, if someone could point me to a URL I'd appreciate it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Nov 11 14:27:06 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA10749 for freebsd-stable-outgoing; Wed, 11 Nov 1998 14:27:06 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from zippy.cdrom.com (zippy.cdrom.com [204.216.27.228]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA10741 for ; Wed, 11 Nov 1998 14:27:04 -0800 (PST) (envelope-from jkh@zippy.cdrom.com) Received: from zippy.cdrom.com (jkh@localhost.cdrom.com [127.0.0.1]) by zippy.cdrom.com (8.9.1/8.9.1) with ESMTP id OAA12946; Wed, 11 Nov 1998 14:26:55 -0800 (PST) (envelope-from jkh@zippy.cdrom.com) To: Jon Bailey cc: "'freebsd-stable@freebsd.org'" Subject: Re: When will -stable become 3.x ? In-reply-to: Your message of "Wed, 11 Nov 1998 12:34:36 MST." <64003B21ECCAD11185C500805F31EC03013BD74F@HOUSTON.matchlogic.com> Date: Wed, 11 Nov 1998 14:26:54 -0800 Message-ID: <12942.910823214@zippy.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Not until Q1 '99. Don't worry about it yet. :) - Jordan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Wed Nov 11 16:58:50 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id QAA00225 for freebsd-stable-outgoing; Wed, 11 Nov 1998 16:58:50 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from resnet.uoregon.edu (resnet.uoregon.edu [128.223.144.32]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id QAA00220; Wed, 11 Nov 1998 16:58:48 -0800 (PST) (envelope-from dwhite@resnet.uoregon.edu) Received: from localhost (dwhite@localhost) by resnet.uoregon.edu (8.8.8/8.8.8) with ESMTP id QAA23741; Wed, 11 Nov 1998 16:58:20 -0800 (PST) (envelope-from dwhite@resnet.uoregon.edu) Date: Wed, 11 Nov 1998 16:58:19 -0800 (PST) From: Doug White To: Florian Nigsch cc: freebsd-current@FreeBSD.ORG, freebsd-stable@FreeBSD.ORG Subject: Re: Upgrade from 2.2-STABLE to -CURRENT In-Reply-To: <3.0.32.19981111195130.0068d1d0@triton> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 11 Nov 1998, Florian Nigsch wrote: > Hello! > > I have experienced a little problem. In fact, it's a serious problem: :) > > I keep pace with the sourcecodechanges with the CVSup mechanism, and so i > wanted to upgrade my FreeBSD 2.2-STABLE (2.2.7) system to -CURRENT. I read > some docs and Makefiles, found out that the best i could do was to try a > "make aout-to-elf" ind /usr/src. > Now, what I ended up with was the following: How current a -CURRENT? > cp strip maybe_stripped > strip maybe_stripped > *** Error code 1 > ...and five more "*** Error code 1". Hm, it's running the wrong strip(1), I'm guessing. Revision 1.9 of strip's Makefile claims to fix this bug. Doug White Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve http://gladstone.uoregon.edu/~dwhite | www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Nov 12 09:37:33 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA01075 for freebsd-stable-outgoing; Thu, 12 Nov 1998 09:37:33 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from pc2-c804.uibk.ac.at (pc2-c804.uibk.ac.at [138.232.82.17]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id JAA01061; Thu, 12 Nov 1998 09:37:30 -0800 (PST) (envelope-from fatal@pc2-c804.uibk.ac.at) Received: (from fatal@localhost) by pc2-c804.uibk.ac.at (8.8.6/8.8.6) id SAA31700; Thu, 12 Nov 1998 18:37:36 +0100 From: Marco van Hylckama Vlieg Message-Id: <199811121737.SAA31700@pc2-c804.uibk.ac.at> Subject: Re: Upgrade from 2.2-STABLE to -CURRENT To: dwhite@resnet.uoregon.edu (Doug White) Date: Thu, 12 Nov 1998 18:37:35 +0100 (MET) Cc: freebsd-stable@FreeBSD.ORG, freebsd-current@FreeBSD.ORG In-Reply-To: from "Doug White" at Nov 11, 98 04:58:19 pm X-Mailer: ELM [version 2.4 PL25] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > On Wed, 11 Nov 1998, Florian Nigsch wrote: > > > cp strip maybe_stripped > > strip maybe_stripped > > *** Error code 1 > > ...and five more "*** Error code 1". > > Hm, it's running the wrong strip(1), I'm guessing. Revision 1.9 of > strip's Makefile claims to fix this bug. > So what do I do to get it going? I'm experiencing the exact same thing. Marco -- QQWT!"^""9QQQ ------------------------------------------------ QP' _%7? WindowMaker, the choice of a GNUstep Generation. P WQQ, http://www.windowmaker.org/ ' mWQh Marco's WindowMaker icons: .__s_QWQQ http://global.uibk.ac.at/~fatal/wmaker/ . ]QQQQQQQ@ L )WQQQQQQ( Marco van Hylckama Vlieg !`_ajQQQQQ@( fatal@global.uibk.ac.at (NeXTmail OK) "?TUVY"` ------------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Nov 12 11:34:26 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA12117 for freebsd-stable-outgoing; Thu, 12 Nov 1998 11:34:26 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from resnet.uoregon.edu (resnet.uoregon.edu [128.223.144.32]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA12095; Thu, 12 Nov 1998 11:34:18 -0800 (PST) (envelope-from dwhite@resnet.uoregon.edu) Received: from localhost (dwhite@localhost) by resnet.uoregon.edu (8.8.8/8.8.8) with ESMTP id LAA20079; Thu, 12 Nov 1998 11:33:40 -0800 (PST) (envelope-from dwhite@resnet.uoregon.edu) Date: Thu, 12 Nov 1998 11:33:39 -0800 (PST) From: Doug White To: Marco van Hylckama Vlieg cc: freebsd-stable@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: Upgrade from 2.2-STABLE to -CURRENT In-Reply-To: <199811121737.SAA31700@pc2-c804.uibk.ac.at> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 12 Nov 1998, Marco van Hylckama Vlieg wrote: > > > > On Wed, 11 Nov 1998, Florian Nigsch wrote: > > > > > cp strip maybe_stripped > > > strip maybe_stripped > > > *** Error code 1 > > > ...and five more "*** Error code 1". > > > > Hm, it's running the wrong strip(1), I'm guessing. Revision 1.9 of > > strip's Makefile claims to fix this bug. > > > So what do I do to get it going? > I'm experiencing the exact same thing. When was the last time you CVSupped? Doug White Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve http://gladstone.uoregon.edu/~dwhite | www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Nov 12 17:23:09 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id RAA27359 for freebsd-stable-outgoing; Thu, 12 Nov 1998 17:23:09 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from freeway.dcfinc.com (cx74889-a.phnx3.az.home.com [24.1.193.157]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id RAA27354 for ; Thu, 12 Nov 1998 17:23:08 -0800 (PST) (envelope-from chad@freeway.dcfinc.com) Received: (from chad@localhost) by freeway.dcfinc.com (8.8.8/8.8.8) id SAA03442 for stable@FreeBSD.org; Thu, 12 Nov 1998 18:22:45 -0700 (MST) (envelope-from chad) From: "Chad R. Larson" Message-Id: <199811130122.SAA03442@freeway.dcfinc.com> Subject: You Animals! To: stable@FreeBSD.ORG Date: Thu, 12 Nov 1998 18:22:45 -0700 (MST) Reply-to: chad@DCFinc.com X-Mailer: ELM [version 2.4ME+ PL40 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Wow. I just CVSup'd -stable. Over 450 changes in the last 6 weeks! -crl -- Chad R. Larson (CRL15) 602-953-1392 Brother, can you paradigm? chad@dcfinc.com chad@larsons.org chad@anasazi.com larson1@home.net DCF, Inc. - 14623 North 49th Place, Scottsdale, Arizona 85254-2207 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Thu Nov 12 17:26:27 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id RAA27676 for freebsd-stable-outgoing; Thu, 12 Nov 1998 17:26:27 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from mh2.cts.com (mh2.cts.com [209.68.192.68]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id RAA27671 for ; Thu, 12 Nov 1998 17:26:25 -0800 (PST) (envelope-from mdavis@cts.com) Received: from io.cts.com (io.cts.com [198.68.174.34]) by mh2.cts.com (8.8.7/8.8.5) with ESMTP id RAA21989 for ; Thu, 12 Nov 1998 17:26:06 -0800 (PST) Received: from davis (ion.cts.com [198.68.174.38]) by io.cts.com (8.8.8/8.8.8) with SMTP id RAA04128 for ; Thu, 12 Nov 1998 17:26:06 -0800 (PST) (envelope-from mdavis@cts.com) From: "Morgan Davis" To: Subject: routed questions Date: Thu, 12 Nov 1998 17:26:05 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2212 (4.71.2419.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.0707.2700 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On a 2.2.7-release system, routed randomly disappears (completely) or stays and stops listening to announcements, repeatedly. It should not do that at all, of course. Could it be due to anemic kernel parameters? Or is this a known problem with -release? routed is being run with these options: router_enable="YES" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-P ripv2,rdisc_interval=45,no_rdisc_adv" # Flags for routing daem On a somewhat related note, running routed on a network that has more than one router to/from the Internet often causes arp errors about addresses being moved. This is really just people who may have an ingress router that differs from the egress router. Is there some routed option that turns off these syslog messages? Or perhaps it can be done with syslog.conf in some way? And yet on another related note, often routed coughs up "unexepect interface" and "discard" errors. Comments on any of these? --Morgan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Fri Nov 13 01:35:28 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA14052 for freebsd-stable-outgoing; Fri, 13 Nov 1998 01:35:28 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from phmit.demon.co.uk (phmit.demon.co.uk [194.222.15.209]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id BAA14038 for ; Fri, 13 Nov 1998 01:35:26 -0800 (PST) (envelope-from dom@phmit.demon.co.uk) Received: from voodoo.pandhm.co.uk [10.100.35.12] by phmit.demon.co.uk with esmtp (Exim 1.82 #1) id 0zeFAd-0003xN-00; Fri, 13 Nov 1998 09:05:35 +0000 Received: from dom by voodoo.pandhm.co.uk with local (Exim 1.92 #1) id 0zeF9y-00019S-00; Fri, 13 Nov 1998 09:04:54 +0000 To: chad@DCFinc.com cc: stable@FreeBSD.ORG Subject: Re: You Animals! X-Mailer: nmh v0.26 X-Colour: Green Organization: Palmer & Harvey McLane In-reply-to: "Chad R. Larson"'s message of "Thu, 12 Nov 1998 18:22:45 MST" <199811130122.SAA03442@freeway.dcfinc.com> Date: Fri, 13 Nov 1998 09:04:54 +0000 From: Dom Mitchell Message-Id: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 12 November 1998, "Chad R. Larson" proclaimed: > Wow. I just CVSup'd -stable. Over 450 changes in the last 6 weeks! When I see things like that, I find it worthwhile to read the CVS commitlogs to find out exactly what has been changed. To grab the latest ones, look on your nearest FTP mirror, under /pub/FreeBSD/FreeBSD-CVS/CVSROOT/commitlogs. -- Dom Mitchell -- Palmer & Harvey McLane -- Unix Systems Administrator ``Damn the philosophy, just provide the functionality and let anyone with a competing philosophy come up with some better alternative if they don't like it.'' -- JKH To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Fri Nov 13 21:07:08 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA15486 for freebsd-stable-outgoing; Fri, 13 Nov 1998 21:07:08 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from tantivy.stanford.edu (tantivy.Stanford.EDU [36.118.0.70]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA15481 for ; Fri, 13 Nov 1998 21:07:05 -0800 (PST) (envelope-from techie@tantivy.stanford.edu) Received: (from techie@localhost) by tantivy.stanford.edu (8.8.8/8.8.5) id VAA29699 for stable@freebsd.org; Fri, 13 Nov 1998 21:06:43 -0800 (PST) Date: Fri, 13 Nov 1998 21:06:43 -0800 (PST) From: Bob Vaughan Message-Id: <199811140506.VAA29699@tantivy.stanford.edu> To: stable@FreeBSD.ORG Subject: make release fails Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to build a release for local use, and I keep running into the following problem.. (all sources cvs'd this week, several times..) following a make world, make release fails like so: cd /usr/share/nls; set - `cat /usr/src/etc/locale.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done; rm -rf POSIX; ln -s C POSIX (cd /usr/src/etc; install -c -o bin -g bin -m 644 aliases amd.map crontab csh.cshrc csh.login csh.logout dm.conf fbtab ftpusers gettytab group hosts host.conf hosts.equiv hosts.lpd inetd.conf auth.conf login.conf login.access motd modems networks newsyslog.conf phones pccard.conf.sample printcap profile protocols rc rc.atm rc.conf rc.devfs rc.firewall rc.local rc.network rc.pccard rc.serial rc.shutdown etc./rc. remote security services shells syslog.conf etc./ttys etc./disktab rpc make.conf /usr/src/etc/../gnu/usr.bin/man/manpath/manpath.config /usr/src/etc/../usr.bin/mail/misc/mail.rc /usr/src/etc/../usr.bin/locate/locate/locate.rc /etc; install -c -o bin -g bin -m 755 netstart pccard_ether /etc; install -c -o bin -g bin -m 600 /dev/null /var/cron/log; install -c -o bin -g bin -m 600 master.passwd /etc; ( cd /usr/src/etc/periodic; make install ); ( cd /usr/src/etc/../gnu/usr.bin/send-pr; make etc-gnats-freefall ); ( cd /usr/src/etc/../gnu/libexec/uucp/sample;! make install ); ( cd /usr/src/etc/../share/termcap; make etc-termcap ); ( cd /usr/src/etc/../usr.sbin/rmt; make etc-rmt ); ( cd /usr/src/etc/sendmail; make etc-sendmail.cf ); ( cd /usr/src/etc/../sys/i386/boot/biosboot; make install-boothelp ); pwd_mkdb -p -d /etc /etc/master.passwd; install -c -o bin -g bin -m 555 MAKEDEV.local etc./MAKEDEV /dev ) install: etc./rc.: No such file or directory *** Error code 71 Stop. *** Error code 1 Stop. it appears to be choking on the following line in /usr/src/etc/Makefile: BIN1= aliases amd.map crontab csh.cshrc csh.login csh.logout dm.conf \ ftpusers gettytab group hosts host.conf hosts.equiv hosts.lpd \ inetd.conf login.conf login.access motd modems networks \ newsyslog.conf phones pccard.conf.sample printcap profile protocols \ rc rc.conf rc.firewall rc.local rc.network rc.pccard rc.serial \ >>>> etc.${MACHINE}/rc.${MACHINE} \ remote security services shells \ syslog.conf ttys etc.${MACHINE}/disktab rpc make.conf \ ${.CURDIR}/../gnu/usr.bin/man/manpath/manpath.config \ ${.CURDIR}/../usr.bin/mail/misc/mail.rc \ ${.CURDIR}/../usr.bin/locate/locate/locate.rc -- Welcome My Son, Welcome To The Machine -- Bob Vaughan | techie@w6yx.stanford.edu | kc6sxc@w6yx.ampr.org | techie@t.stanford.edu | KC6SXC@W6YX.#NCA.CA.USA.NOAM | P.O. Box 9792, Stanford, Ca 94309-9792 -- I am Me, I am only Me, And no one else is Me, What could be simpler? -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sat Nov 14 10:59:12 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA06925 for freebsd-stable-outgoing; Sat, 14 Nov 1998 10:59:12 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from user1.channel1.com (user1.channel1.com [199.1.13.9]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA06920 for ; Sat, 14 Nov 1998 10:59:09 -0800 (PST) (envelope-from admin@channel1.com) Received: from ntadmin (ntadmin.channel1.com [204.96.33.24]) by user1.channel1.com (8.9.1/8.9.1) with SMTP id NAA06860 for ; Sat, 14 Nov 1998 13:58:46 -0500 (EST) Message-Id: <3.0.5.32.19981114135846.00ebd100@pop.channel1.com> X-Sender: deepblue@pop.channel1.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Sat, 14 Nov 1998 13:58:46 -0500 To: stable@FreeBSD.ORG From: Mail Handler Subject: stable make installworld problem: zoneinfo Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi -- Doing a CVSUP upgrade from 2.2.2 -> 2.2.7. make buildworld completes successfully. make installworld produces: ===> share/zoneinfo umask 022; cd /usr/src/share/zoneinfo; zic -d /usr/share/zoneinfo -p America/New_York -y /usr/src/share/zoneinfo/yearistype africa antarctica asia australasia etcetera europe factory northamerica southamerica systemv Bad system call - core dumped *** Error code 140 Stop. *** Error code 1 I've tried the usual: 1. re-cvsuping (every day for a week), re-building; 2. make clean in zoneinfo, re-building; 3. remove zoneinfo from checkouts.cvs:RELENG_2_2, rm -rf /usr/src/share/zoneinfo, re-cvsup, build, install. Same error, every time. Any suggestions? Brian Brian Miller admin@channel1.com Channel 1 Communications 617-864-0100 voice 617-354-3100 fax http://www.channel1.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sat Nov 14 18:11:27 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA09419 for freebsd-stable-outgoing; Sat, 14 Nov 1998 18:11:27 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from tantivy.stanford.edu (tantivy.Stanford.EDU [36.118.0.70]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA09414 for ; Sat, 14 Nov 1998 18:11:24 -0800 (PST) (envelope-from techie@tantivy.stanford.edu) Received: (from techie@localhost) by tantivy.stanford.edu (8.8.8/8.8.5) id SAA06808; Sat, 14 Nov 1998 18:10:55 -0800 (PST) From: Bob Vaughan Message-Id: <199811150210.SAA06808@tantivy.stanford.edu> Subject: Re: make release fails In-Reply-To: <199811141805.KAA12841@vashon.polstra.com> from John Polstra at "Nov 14, 1998 10: 5:59 am" To: jdp@polstra.com (John Polstra) Date: Sat, 14 Nov 1998 18:10:54 -0800 (PST) Cc: stable@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > In article <199811140506.VAA29699@tantivy.stanford.edu>, > Bob Vaughan wrote: > > > I'm trying to build a release for local use, and I keep running into the > > following problem.. (all sources cvs'd this week, several times..) > > I hear you saying it, but to me it looks like your sources are not > up to date. > First of all, I sent this to stable@freebsd.org, not current@freebsd.org.. I'm using the following cvsupfile.. *default host=cvsup.freebsd.org *default base=/usr *default prefix=/usr *default release=cvs *default tag=RELENG_2_2 *default delete use-rel-suffix *default compress src-all cvs-crypto I've tried several times, on several different machines, using both my local cvs mirror, and cvsup.freebsd.org, and I always get the following version: # $Id: Makefile,v 1.143.2.16 1998/06/11 20:22:14 guido Exp $ deleting or renaming the file results in checkout of the same version. > > it appears to be choking on the following line in /usr/src/etc/Makefile: > > > > > > BIN1= aliases amd.map crontab csh.cshrc csh.login csh.logout dm.conf \ > > ftpusers gettytab group hosts host.conf hosts.equiv hosts.lpd \ > > inetd.conf login.conf login.access motd modems networks \ > > newsyslog.conf phones pccard.conf.sample printcap profile protocols \ > > rc rc.conf rc.firewall rc.local rc.network rc.pccard rc.serial \ > > >>>> etc.${MACHINE}/rc.${MACHINE} \ > > This line has said "MACHINE_ARCH" instead of "MACHINE" since around > the end of August. for the RELENG_2_2 tag? if so, something is broke.. > > Make sure your sources are really up to date. Also, do a make world > first, before you do your make release. > I quote from my original email "following a make world, make release fails like so:" > John > -- > John Polstra jdp@polstra.com > John D. Polstra & Co., Inc. Seattle, Washington USA > "Nobody ever went broke underestimating the taste of the American public." > -- H. L. Mencken > -- -- Welcome My Son, Welcome To The Machine -- Bob Vaughan | techie@w6yx.stanford.edu | kc6sxc@w6yx.ampr.org | techie@t.stanford.edu | KC6SXC@W6YX.#NCA.CA.USA.NOAM | P.O. Box 9792, Stanford, Ca 94309-9792 -- I am Me, I am only Me, And no one else is Me, What could be simpler? -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message From owner-freebsd-stable Sat Nov 14 18:15:10 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA09761 for freebsd-stable-outgoing; Sat, 14 Nov 1998 18:15:10 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from wall.polstra.com (rtrwan160.accessone.com [206.213.115.74]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA09755 for ; Sat, 14 Nov 1998 18:15:08 -0800 (PST) (envelope-from jdp@polstra.com) Received: from vashon.polstra.com (vashon.polstra.com [206.213.73.13]) by wall.polstra.com (8.9.1/8.9.1) with ESMTP id SAA04981; Sat, 14 Nov 1998 18:14:45 -0800 (PST) (envelope-from jdp@polstra.com) Received: (from jdp@localhost) by vashon.polstra.com (8.9.1/8.9.1) id SAA14640; Sat, 14 Nov 1998 18:14:45 -0800 (PST) (envelope-from jdp@polstra.com) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <199811150210.SAA06808@tantivy.stanford.edu> Date: Sat, 14 Nov 1998 18:14:45 -0800 (PST) Organization: Polstra & Co., Inc. From: John Polstra To: Bob Vaughan Subject: Re: make release fails Cc: stable@FreeBSD.ORG Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 15-Nov-98 Bob Vaughan wrote: >> In article <199811140506.VAA29699@tantivy.stanford.edu>, >> Bob Vaughan wrote: >> >> > I'm trying to build a release for local use, and I keep running into the >> > following problem.. (all sources cvs'd this week, several times..) >> >> I hear you saying it, but to me it looks like your sources are not >> up to date. >> > > First of all, I sent this to stable@freebsd.org, not current@freebsd.org.. Sorry, my mistake. I have a screwy system for viewing the lists, and I got confused about which one I was reading. Disregard my answer. But anyway, I believe that "make" itself is supposed to define the value of ${MACHINE}. I wonder why yours didn't ... John --- John Polstra jdp@polstra.com John D. Polstra & Co., Inc. Seattle, Washington USA "Nobody ever went broke underestimating the taste of the American public." -- H. L. Mencken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message