From owner-freebsd-alpha Sun Oct 10 5:47:51 1999 Delivered-To: freebsd-alpha@freebsd.org Received: from post.bgnett.no (post.bgnett.no [194.54.96.133]) by hub.freebsd.org (Postfix) with ESMTP id 9E22D152BD for ; Sun, 10 Oct 1999 05:47:31 -0700 (PDT) (envelope-from erik@habatech.no) Received: from bsdbox.habatech.no ([62.92.133.3]) by post.bgnett.no (8.8.8/8.8.8) with ESMTP id OAA07494 for ; Sun, 10 Oct 1999 14:47:29 +0200 (CEST) (envelope-from erik@habatech.no) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Sun, 10 Oct 1999 14:47:21 +0200 (CEST) From: "Erik H. Bakke" To: freebsd-alpha@freebsd.org Subject: Timer problems with current on 164SX Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Since a recent cvsup, I have been experiencing boot problems on my 164SX based box. During boot, the kernel panics in cpu_initclocks with "no clock attached" This does not happen with a kernel from October 6th. A cvsup today did not solve the problem. I have included the dmesg output from the problematic kernel, as well as my config file. Does anyone know what is wrong? Also note the multiple detection of the IDE controller on this board... *** Start of dmesg output *** Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #12: Sun Oct 10 14:30:48 GMT 1999 root@alpha.habatech.no:/usr/src/sys/compile/HABA EB164 Digital AlphaPC 164SX 533 MHz, 531MHz 8192 byte page size, 1 processor. CPU: PCA56 (21164PC) major=9 minor=2 extensions=0x1 OSF PAL rev: 0x1000600020116 real memory = 65142784 (63616K bytes) avail memory = 59473920 (58080K bytes) Preloaded elf kernel "kernel" at 0xfffffc000051c000. cia0: Pyxis, pass 1 cia0: extended capabilities: 1 pcib0: <2117x PCI host bus adapter> on cia0 pci0: on pcib0 de0: irq 9 at device 5.0 on pci0 de0: interrupting at CIA irq 9 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:a0:cc:6a:3b:13 de0: enabling 100baseTX port ncr0: irq 10 at device 7.0 on pci0 ncr0: interrupting at CIA irq 10 ata-pci0: at device 8.0 on pci0 ata-pci0: Busmastering DMA not supported ata-pci1: at device 8.1 on pci0 ata-pci1: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci1 ata1 at 0x0170 irq 15 on ata-pci1 ata-pci2: at device 8.2 on pci0 ata-pci2: Busmastering DMA not supported ata1: unit already attached ata-pci3: at device 8.3 on pci0 ata-pci3: Busmastering DMA not supported vga-pci0: irq 8 at device 9.0 on pci0 panic: cpu_initclocks: no clock attached syncing disks... done Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... *** End of dmesg output *** *** Start of config file *** machine alpha cpu EV4 cpu EV5 ident HABA maxusers 32 # Platforms supported options DEC_EB164 # EB164, PC164, PC164LX, PC164SX options INET #InterNETworking options FFS #Berkeley Fast Filesystem options CD9660 #ISO 9660 Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console # Platform chipsets #controller cia0 #controller apecs0 #controller tsunami0 #controller lca0 # Standard busses controller pci0 controller isa0 # TurboChannel host bus support #controller tcasic0 #controller tc0 #controller tcds0 #controller ioasic0 # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. controller ncr0 #controller isp0 #controller esp0 controller scbus0 device da0 device sa0 device pass0 device cd0 # # ATA and ATAPI devices # This is work in progress, use at your own risk. # It currently reuses the majors of wd.c and friends. # It cannot co-exist with the old system in one kernel. # You only need one "controller ata0" for it to find all # PCI devices on modern machines. controller ata0 device atadisk0 # ATA disk drives device atapicd0 # ATAPI CDROM drives device atapifd0 # ATAPI floppy drives device atapist0 # ATAPI tape drives # real time clock device mcclock0 at isa0 port 0x70 # Not enabled since it only works on CIA chipsets controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? device sio0 at isa0 port IO_COM1 irq 4 device sio1 at isa0 port IO_COM2 irq 3 flags 0x50 # Operational PCI Ethernet drivers. device de0 pseudo-device loop pseudo-device ether pseudo-device pty # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM #controller ppbus0 #controller vpo0 at ppbus? #device lpt0 at ppbus? #device plip0 at ppbus? #device ppi0 at ppbus? #device pps0 at ppbus? #device lpbb0 at ppbus? #device ppc0 at isa? port? irq 7 *** End of config file *** ===========================+================+=============================== Erik H. Bakke | | To be or not to be... Senior Consultant/Developer|erik@habatech.no| Is simply a question of Habatech AS | | binary logic ===========================+================+============================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message