From owner-freebsd-isdn Mon Jun 21 2: 8:42 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from mri2.rug.ac.be (mri2.rug.ac.be [157.193.133.1]) by hub.freebsd.org (Postfix) with SMTP id 6FCF814DA3 for ; Mon, 21 Jun 1999 02:08:34 -0700 (PDT) (envelope-from rik.achten@rug.ac.be) Received: from r88.mri by mri2.rug.ac.be; (5.65/1.1.8.2/03Nov94-8.2MPM) id AA26898; Mon, 21 Jun 1999 11:08:25 +0200 Message-Id: <376E019B.3CF9A7B8@rug.ac.be> Date: Mon, 21 Jun 1999 11:10:51 +0200 From: Rik Achten Reply-To: rik.achten@rug.ac.be Organization: UZ Gent X-Mailer: Mozilla 4.5 [en] (X11; I; FreeBSD 3.1-RELEASE i386) X-Accept-Language: en, nl, af, fr, de, es, pt Mime-Version: 1.0 To: isdn Subject: Fritz!Card PCI 2000 Content-Type: multipart/mixed; boundary="------------53870D0959573352363FA8BE" Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------53870D0959573352363FA8BE Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I recently installed a Fritz!Card PCI 2000 for ISDN purposes. Actually, I forgot to specify that it should have been an ISA card. Since only the ELSA pro1000 is in the list of supported PCI cards, I tried to install my Fritz!Card PCI 2000 as such, but upon reboot it was not found when probing for PCI devices. Has anybody tried to use this card? Thanks R88 --------------53870D0959573352363FA8BE Content-Type: text/x-vcard; charset=us-ascii; name="rik.achten.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Rik Achten Content-Disposition: attachment; filename="rik.achten.vcf" begin:vcard n:Achten;Eric tel;fax:+32-9-2404969 tel;home:+32-9-2591445 tel;work:+32-9-2404071 x-mozilla-html:FALSE url:http://mri2-gw00.rug.ac.be/ org:University Hospital Gent;MR Department version:2.1 email;internet:rik.achten@rug.ac.be title:MD, PhD adr;quoted-printable:;;UZ Gent, MR Department=0D=0ADe Pintelaan 185=0D=0A;Gent;;B-9000;Belgium x-mozilla-cpt:;7936 fn:Eric Achten end:vcard --------------53870D0959573352363FA8BE-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Mon Jun 21 2:22:40 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by hub.freebsd.org (Postfix) with ESMTP id 27ECE14DAA for ; Mon, 21 Jun 1999 02:22:29 -0700 (PDT) (envelope-from ust@cert.siemens.de) X-Envelope-Sender-Is: ust@cert.siemens.de (at relayer david.siemens.de) Received: from mail1.siemens.de (mail1.siemens.de [139.23.33.14]) by david.siemens.de (8.9.3/8.9.3) with ESMTP id LAA12536; Mon, 21 Jun 1999 11:22:21 +0200 (MET DST) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail1.siemens.de (8.9.3/8.9.3) with ESMTP id LAA26905; Mon, 21 Jun 1999 11:22:21 +0200 (MET DST) Received: from alaska.cert.siemens.de (alaska.cert.siemens.de [139.23.202.134]) by mars.cert.siemens.de (8.9.3/8.9.3/Siemens CERT [ $Revision: 1.9 ]) with ESMTP id LAA03661; Mon, 21 Jun 1999 11:22:18 +0200 (CEST) Received: (from ust@localhost) by alaska.cert.siemens.de (8.9.3/8.9.3/alaska [ $Revision: 1.2 ]) id JAA01543; Mon, 21 Jun 1999 09:22:18 GMT (envelope-from ust) Date: Mon, 21 Jun 1999 11:22:18 +0200 From: Udo Schweigert To: isdn Cc: Rik Achten Subject: Re: Fritz!Card PCI 2000 Message-ID: <19990621112218.A1420@alaska.cert.siemens.de> Mail-Followup-To: isdn , Rik Achten References: <376E019B.3CF9A7B8@rug.ac.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.5i In-Reply-To: <376E019B.3CF9A7B8@rug.ac.be>; from Rik Achten on Mon, Jun 21, 1999 at 11:10:51AM +0200 X-Operating-System: FreeBSD 3.2-STABLE Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Jun 21, 1999 at 11:10:51AM +0200, Rik Achten wrote: > I recently installed a Fritz!Card PCI 2000 for ISDN purposes. Actually, > I forgot to specify that it should have been an ISA card. Since only the > ELSA pro1000 is in the list of supported PCI cards, I tried to install > my Fritz!Card PCI 2000 as such, but upon reboot it was not found when > probing for PCI devices. Has anybody tried to use this card? > Thanks > R88 I don't know a Fritz!Card PCI 2000 only of Fritz!Card PCI; anyway: I think it is supported. If you are not using FreeBSD 4.0-CURRENT, you need the latest i4b release 0.81.00 from http://www.freebsd-support.de/i4b/ Regards ------------------------------------------------------------------------------- Udo Schweigert || Voice : +49 89 636 42170 Siemens AG, Siemens CERT || Fax : +49 89 636 48000 ZT IK 3 || email : Udo.Schweigert@mchp.siemens.de D-81730 Muenchen / Germany || : ust@cert.siemens.de PGP fingerprint || 2A 53 F6 A6 30 59 64 02 6B C4 E0 73 B2 C9 6C E7 ------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Mon Jun 21 7:57: 5 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from support.euronet.nl (support.euronet.nl [194.134.32.134]) by hub.freebsd.org (Postfix) with ESMTP id 5C6E614EF2; Mon, 21 Jun 1999 07:57:00 -0700 (PDT) (envelope-from pieterw@support.euronet.nl) Received: (from pieterw@localhost) by support.euronet.nl (8.9.1/8.9.1) id QAA15862; Mon, 21 Jun 1999 16:56:59 +0200 (CEST) (envelope-from pieterw) Date: Mon, 21 Jun 1999 16:56:58 +0200 From: Pieter Westland To: freebsd-isdn@freebsd.org, freebsd-questions@freebsd.org Subject: Strange thing with dialback Message-ID: <19990621165658.C28785@support.euronet.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95i X-OS: FreeBSD support.euronet.nl 2.2.7-STABLE FreeBSD 2.2.7-STABLE X-URL: http://support.euronet.nl/~pieterw X-Editor: vim X-Organization: EuroNet * Internet Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, When starting my ISDN-dialback, I get the following strange message in my debugwindow: isdnd[3049]: DBG find_matching_entry_incoming: 206240111 - screening network provided isdnd[3049]: DBG find_matching_entry_incoming: entry 0, bprot 1 != incomingprot 0 Isdnd then does not pick up the line, I think because of a problem with the incoming protocol. Does anyone has a clue? Pieter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Tue Jun 22 5:37:29 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from hcsext.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id 1E45214C85; Tue, 22 Jun 1999 05:37:16 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (1791 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Tue, 22 Jun 1999 14:37:15 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10wPna-0000fnC; Tue, 22 Jun 99 14:37 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Re: Strange thing with dialback In-Reply-To: <19990621165658.C28785@support.euronet.nl> from Pieter Westland at "Jun 21, 99 04:56:58 pm" To: pieter@nl.euro.net (Pieter Westland) Date: Tue, 22 Jun 1999 14:37:10 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 885 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From the keyboard of Pieter Westland: > When starting my ISDN-dialback, I get the following strange message in > my debugwindow: > > isdnd[3049]: DBG find_matching_entry_incoming: 206240111 - screening network provided > isdnd[3049]: DBG find_matching_entry_incoming: entry 0, bprot 1 != incomingprot 0 You have the choice of no protocol on the B-channel (isdnd.rc: b1protocol = raw) or HDLC on the B-channel (isdnd.rc: b1protocol = hdlc). The settings in your isdnd.rc and the protocol requested by the incoming call do not match (or there is a bug in i4b). hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Tue Jun 22 12:32:14 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from mail.ppp.net (mail.ppp.net [194.64.12.35]) by hub.freebsd.org (Postfix) with ESMTP id 4CA65156CF for ; Tue, 22 Jun 1999 12:32:03 -0700 (PDT) (envelope-from ernie!bert.kts.org!hm@ppp.net) Received: from casparc.ppp.net (casparc2.ppp.net [194.64.12.42]) by mail.ppp.net (8.8.8/8.8.8) with SMTP id VAA07140 for ; Tue, 22 Jun 1999 21:32:02 +0200 Received: from ernie by casparc.ppp.net with uucp (Smail3.1.28.1 #1) id m10wWH3-002ZjjC; Tue, 22 Jun 99 21:32 MET DST Received: from bert.kts.org([194.55.156.2]) (1766 bytes) by ernie.kts.org via sendmail with P:smtp/R:smart_host/T:uux (sender: ) id for ; Tue, 22 Jun 1999 21:28:07 +0200 (CEST) (Smail-3.2.0.103 1998-Oct-9 #5 built 1999-Apr-19) Received: from localhost (1318 bytes) by bert.kts.org via sendmail with P:stdio/R:smart_host/T:smtp (sender: ) (ident using unix) id for ; Tue, 22 Jun 1999 21:30:08 +0200 (CEST) (Smail-3.2.0.103 1998-Oct-9 #4 built 1998-Dec-26) Message-Id: From: hm@kts.org (Hellmuth Michaelis) Subject: Teles S0/8 available To: freebsd-isdn@freebsd.org (ISDN for BSD) Date: Tue, 22 Jun 1999 21:30:08 +0200 (CEST) Organization: Kitchen Table Systems Reply-To: hm@kts.org X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, i've got a bunch of used ISDN Teles S0/8 cards for free for sending them out to whoever wants them. They are ISA 8-bit cards (the only difference to the "normal" Teles S0/16 cards is that their IRQ's are only settable to 3...9), supported by i4b and should function out of the box. There is no guarantee that they work and no paper documentation and a cable only for half of the cards i have. Two of the cards in an old PC with FreeBSD and i4b and a "special" cable make up a very usable ISDN D-channel analyzer. One of them in an old PC with FreeBSD and i4b make up a very usable Internet access router :-) I will send them in a first come first served manner to anywhere for getting the shipping costs back somehow. hellmuth -- Hellmuth Michaelis hm@kts.org Hamburg, Europe We all live in a yellow subroutine, yellow subroutine, yellow subroutine ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Tue Jun 22 12:41: 1 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from devils.int.maquina.com (rcu127.rnl.ist.utl.pt [193.136.154.127]) by hub.freebsd.org (Postfix) with ESMTP id 3C837158FD for ; Tue, 22 Jun 1999 12:40:33 -0700 (PDT) (envelope-from gabriel@maquina.com) Received: from localhost (gabriel@localhost) by devils.int.maquina.com (8.9.3/8.9.3) with ESMTP id UAA15396; Tue, 22 Jun 1999 20:39:57 +0100 (WEST) (envelope-from gabriel@maquina.com) X-Authentication-Warning: devils.int.maquina.com: gabriel owned process doing -bs Date: Tue, 22 Jun 1999 20:39:57 +0100 (WEST) From: Jose Gabriel Marcelino X-Sender: gabriel@devils.int.maquina.com To: Hellmuth Michaelis Cc: ISDN for BSD Subject: Re: Teles S0/8 available In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Hellmuth, I'm interested! How would you like to be reimbursed for the shipping costs? Do you have anything you might want? (Coffee, Beer, Hardware (we're resellers of some fine equipment :-)) This would be shipped to Portugal, so it's easier (no customs as we're all EC) regards, Gabriel > i've got a bunch of used ISDN Teles S0/8 cards for free for sending them > out to whoever wants them. > > They are ISA 8-bit cards (the only difference to the "normal" Teles S0/16 > cards is that their IRQ's are only settable to 3...9), supported by i4b > and should function out of the box. > > There is no guarantee that they work and no paper documentation and a > cable only for half of the cards i have. > > Two of the cards in an old PC with FreeBSD and i4b and a "special" cable > make up a very usable ISDN D-channel analyzer. One of them in an old PC > with FreeBSD and i4b make up a very usable Internet access router :-) > > I will send them in a first come first served manner to anywhere for getting > the shipping costs back somehow. > > hellmuth > -- > Hellmuth Michaelis hm@kts.org Hamburg, Europe > We all live in a yellow subroutine, yellow subroutine, yellow subroutine ... > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isdn" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Wed Jun 23 0:23:18 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from hcsext.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id 02FAC14EDC for ; Wed, 23 Jun 1999 00:23:15 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (1739 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Wed, 23 Jun 1999 09:23:04 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10whNA-0000dCC; Wed, 23 Jun 99 09:23 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Re: Teles S0/8 available In-Reply-To: from Jose Gabriel Marcelino at "Jun 22, 99 08:39:57 pm" To: gabriel@maquina.com (Jose Gabriel Marcelino) Date: Wed, 23 Jun 1999 09:23:03 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 865 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I forgot: please mail your postal address and how much cards you like to get ! From the keyboard of Jose Gabriel Marcelino: > I'm interested! How would you like to be reimbursed for the shipping > costs? Somehow. ;-) The reason why i ask for it is that i'll be shipping quite a lot of them and thats a bit too much for me. Give what you are able to give. In case anybody is not able to give any- thing, thats fine for mee too, i more like to ship them to anybody who is able to use them than throwing good working usable equipment away. hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Wed Jun 23 8: 2:14 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from fep04-svc.tin.it (mta04-acc.tin.it [212.216.176.35]) by hub.freebsd.org (Postfix) with ESMTP id B12E315341 for ; Wed, 23 Jun 1999 08:02:07 -0700 (PDT) (envelope-from giorgio.bozio@ag2000.it) Received: from giorgio ([212.216.41.252]) by fep04-svc.tin.it (InterMail v4.0 201-221-105) with SMTP id <19990623150205.DPEC9116.fep04-svc@giorgio> for ; Wed, 23 Jun 1999 17:02:05 +0200 From: giorgio.bozio@ag2000.it To: freebsd-isdn@FreeBSD.ORG Date: Wed, 23 Jun 1999 16:58:48 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: kernel rebuild for i4bisppp In-reply-to: References: from Jose Gabriel Marcelino at "Jun 22, 99 08:39:57 pm" X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19990623150205.DPEC9116.fep04-svc@giorgio> Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm trying to install and configure an internal usrobotics isdn card. I understood I have to rebuild kernel to support the card and ppp over isdn. I added to my kernel configuration file the support for the usrobotics card and the line suggested by the isdn4bsd faq: pseudo-device "i4bisppp" 4 but when I do "make" it gives lots of errors like this one: .... i4b_bchan.o:In function 'isic_Bchannel_setup': i4b_bchan.o(.text+0x9b): undefined reference to 'i4b_Bcleanifg' ..... I tried all sorts of variants in the kernel config file but with the same results, what is wrong in what I'm doing? do I have to add something else to the file? please help, I'm beggining to lose hope. thank you, Giorgio Bozio To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Wed Jun 23 8:33:43 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from hcsext.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id EDD86153E7 for ; Wed, 23 Jun 1999 08:33:35 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (2201 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Wed, 23 Jun 1999 17:32:45 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10wp0z-0000fqC; Wed, 23 Jun 99 17:32 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Re: kernel rebuild for i4bisppp In-Reply-To: <19990623150205.DPEC9116.fep04-svc@giorgio> from "giorgio.bozio@ag2000.it" at "Jun 23, 99 04:58:48 pm" To: giorgio.bozio@ag2000.it Date: Wed, 23 Jun 1999 17:32:41 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1356 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From the keyboard of giorgio.bozio@ag2000.it: > I'm trying to install and configure an internal usrobotics isdn card. I > understood I have to rebuild kernel to support the card and ppp over > isdn. I added to my kernel configuration file the support for the > usrobotics card and the line suggested by the isdn4bsd faq: > pseudo-device "i4bisppp" 4 > but when I do "make" it gives lots of errors like this one: > .... > i4b_bchan.o:In function 'isic_Bchannel_setup': > i4b_bchan.o(.text+0x9b): undefined reference to 'i4b_Bcleanifg' > ..... You have to add almost all of i4b's pseudo-device's in addition to the isic driver and isic driver options: pseudo-device "i4bq921" pseudo-device "i4bq931" pseudo-device "i4b" pseudo-device "i4btrc" 4 pseudo-device "i4bctl" pseudo-device "i4brbch" 4 pseudo-device "i4btel" 2 pseudo-device "i4bisppp" 4 pseudo-device sppp 4 Or just add everything for i4b found in the LINT config file and uncomment your particular isic driver line. hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 24 1:22:43 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from hcsext.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id B569214BCC for ; Thu, 24 Jun 1999 01:22:35 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (3467 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Thu, 24 Jun 1999 10:22:35 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10x4mI-0000dCC; Thu, 24 Jun 99 10:22 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Teles S0/8 docs and state To: freebsd-isdn@freebsd.org (ISDN Mailinglist) Date: Thu, 24 Jun 1999 10:22:34 +0200 (METDST) Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 2780 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, First of all let me thank Julian Stacey of Vector Systems in Munich, Germany (jhs@freebsd.org) for a massive donation of stamps i received today. This almost completely covers my costs so far so there is no need for anyone else who received Teles cards to send me anything back! Thank you, Julian! The first cards were sent off yesterday and i will continue to send the others out today and tomorrow. Two cards are left over yet .. ;-) Here is the doc for the jumper settings (i hope i got it right): Jumper settings documentation for Teles S0/8 cards -------------------------------------------------- ------------------------------- | | | | | | | +-+ | | | Sub-D 9 jack | | | | +-+ | J2 J10 | | :::::: :::::::: | | 123456 12345678 | ------- ---- | | ------------------ ISA Bus plug The card has 2 jumper blocks, one with 6x2 pins (J2) and one with 8x2 pins (J10). J2 (6x2 pins) is the interrupt select jumper, ONLY ONE jumper may be shorted at any time! Pin 1 2 3 4 5 6 : : : : : : (short pin to select IRQ) IRQ 2 3 4 5 6 7 The default setting is : | : : : : which is IRQ 3 used. The card occupies 4 Kbyte address space, J10 (8x2 pins) is the memory base address select jumper: Pin 1 2 3 4 5 6 7 8 : : : : : : : : Bit 19 18 17 16 15 14 13 12 Notice: a shorted jumper gives a 0 (zero), an open jumper gives a 1 (one) !! ============================================================================ Examples: Base address D000, set jumper to D0 = 11010000, set J10 to: Pin 1 2 3 4 5 6 7 8 : : | : | | | | Bit 19 18 17 16 15 14 13 12 Base address C800, set jumper to C8 = 11001000, set J10 to: Pin 1 2 3 4 5 6 7 8 : : | | : | | | Bit 19 18 17 16 15 14 13 12 Base address D400, set jumper to D4 = 11010100, set J10 to: Pin 1 2 3 4 5 6 7 8 : : | : | : | | Bit 19 18 17 16 15 14 13 12 hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 24 4: 3:55 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from hcsext.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id 81E6314E70 for ; Thu, 24 Jun 1999 04:03:49 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (1104 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Thu, 24 Jun 1999 13:03:48 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10x7IK-0000dbC; Thu, 24 Jun 99 13:03 METDST Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Teles S0/8 are out! To: freebsd-isdn@freebsd.org (ISDN Mailinglist) Date: Thu, 24 Jun 1999 13:03:48 +0200 (METDST) Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 423 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org ... as the subject says, everyone who mailed until now got one or will get one but now they are out! hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 24 8:33: 0 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from fep01-svc.tin.it (mta01-acc.tin.it [212.216.176.32]) by hub.freebsd.org (Postfix) with ESMTP id 1673E14D20 for ; Thu, 24 Jun 1999 08:32:50 -0700 (PDT) (envelope-from giorgio.bozio@ag2000.it) Received: from giorgio ([212.216.41.199]) by fep01-svc.tin.it (InterMail v4.0 201-221-105) with SMTP id <19990624153248.DZYT4130.fep01-svc@giorgio>; Thu, 24 Jun 1999 17:32:48 +0200 From: giorgio.bozio@ag2000.it To: hm@hcs.de Date: Thu, 24 Jun 1999 17:29:25 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: kernel rebuild for i4bisppp Cc: freebsd-isdn@FreeBSD.ORG In-reply-to: References: <19990623150205.DPEC9116.fep04-svc@giorgio> from "giorgio.bozio@ag2000.it" at "Jun 23, 99 04:58:48 pm" X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19990624153248.DZYT4130.fep01-svc@giorgio> Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Thanks for the reply and advice. In fact it worked, I was able to rebuild kernel and have the isp interfaces. Now another problem though, after configuring isdn.rc and spp with sppcontrol as isdn faq says I type ifconfig isp0 0.0.0.0 0.0.0.1 debug link1 and get back this two lines: jun 24 19:11:58 giorgio /kernel: isp0: lcp close (initial) ifconfig: ioctl (SIOCAIFADDR): File exists what does this mean? thanks for the help, Giorgio From: hm@hcs.de (Hellmuth Michaelis) Subject: Re: kernel rebuild for i4bisppp To: giorgio.bozio@ag2000.it Date sent: Wed, 23 Jun 1999 17:32:41 +0200 (METDST) Copies to: freebsd-isdn@FreeBSD.ORG Send reply to: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH > From the keyboard of giorgio.bozio@ag2000.it: > > > I'm trying to install and configure an internal usrobotics isdn card. I > > understood I have to rebuild kernel to support the card and ppp over > > isdn. I added to my kernel configuration file the support for the > > usrobotics card and the line suggested by the isdn4bsd faq: > > pseudo-device "i4bisppp" 4 > > but when I do "make" it gives lots of errors like this one: > > .... > > i4b_bchan.o:In function 'isic_Bchannel_setup': > > i4b_bchan.o(.text+0x9b): undefined reference to 'i4b_Bcleanifg' > > ..... > > You have to add almost all of i4b's pseudo-device's in addition to the isic > driver and isic driver options: > > pseudo-device "i4bq921" > pseudo-device "i4bq931" > pseudo-device "i4b" > pseudo-device "i4btrc" 4 > pseudo-device "i4bctl" > pseudo-device "i4brbch" 4 > pseudo-device "i4btel" 2 > pseudo-device "i4bisppp" 4 > pseudo-device sppp 4 > > Or just add everything for i4b found in the LINT config file and uncomment > your particular isic driver line. > > hellmuth > -- > Hellmuth Michaelis Tel +49 40 559747-70 > HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 > Oldesloer Strasse 97-99 Mail hm [at] hcs.de > 22457 Hamburg WWW http://www.hcs.de > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 24 12:48:42 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from munich.netsurf.de (laurin.munich.netsurf.de [194.64.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 58ABF14C91 for ; Thu, 24 Jun 1999 12:48:33 -0700 (PDT) (envelope-from Klaus.Herrmann@gmx.net) Received: from wunderland (ns1208.munich.netsurf.de [195.180.235.208]) by munich.netsurf.de (8.8.5/8.7) with SMTP id VAA00589 for ; Thu, 24 Jun 1999 21:48:31 +0200 (MET DST) From: Klaus Herrmann To: freebsd-isdn@FreeBSD.org Subject: Re: kernel rebuild for i4bisppp Date: Thu, 24 Jun 1999 21:45:46 +0200 X-Mailer: KMail [version 1.0.17] Content-Type: text/plain References: <19990624153248.DZYT4130.fep01-svc@giorgio> MIME-Version: 1.0 Message-Id: <99062421482303.00319@wunderland> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Thanks for the reply and advice. In fact it worked, I was able to=20 > rebuild kernel and have the isp interfaces. Now another problem=20 > though, after configuring isdn.rc and spp with sppcontrol as isdn=20 > faq says I type ifconfig isp0 0.0.0.0 0.0.0.1 debug link1 > and get back this two lines: > jun 24 19:11:58 giorgio /kernel: isp0: lcp close (initial) > ifconfig: ioctl (SIOCAIFADDR): File exists > what does this mean? probably nothing bad. my pc always says this and every time i connect and everything is working fine. =09--klaus -- Feel disillusioned? I've got some great new illusions ... Klaus Herrmann email: klaus.herrmann@gmx.net http://linuxlover.notrix.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 24 23:47:54 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from mail.eunet.ch (mail.eunet.ch [146.228.10.7]) by hub.freebsd.org (Postfix) with ESMTP id E7C5515054 for ; Thu, 24 Jun 1999 23:47:47 -0700 (PDT) (envelope-from rolf.scheurer@tecan.ch) Received: from sfirewall. (mail.tecan.ch [194.191.112.5]) by mail.eunet.ch (8.9.3/1.34) via SMTP id GAA03345 for ; Fri, 25 Jun 1999 06:47:45 GMT env-from (rolf.scheurer@tecan.ch) Received: by sexchange02.tecan.ch with Internet Mail Service (5.5.2448.0) id ; Fri, 25 Jun 1999 08:47:41 +0200 Message-ID: From: Rolf Scheurer To: freebsd-isdn@FreeBSD.ORG Subject: AVM Fritz PCI? Date: Fri, 25 Jun 1999 08:47:37 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi I bought a AVM Fritz PCI card, but I couldn't implement it into my system yet. Because I couldn't find the specific parameters for it in the documentation, I tried. options "AVM_A1" device isic0 and device isic0 at pci? But the system can't find the card with those configurations. Does somebody know how to implement this card into FreeBSD? Thanks Rolf To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Fri Jun 25 1: 4: 5 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by hub.freebsd.org (Postfix) with ESMTP id 2904714D0E for ; Fri, 25 Jun 1999 01:04:02 -0700 (PDT) (envelope-from ust@cert.siemens.de) X-Envelope-Sender-Is: ust@cert.siemens.de (at relayer david.siemens.de) Received: from mail1.siemens.de (mail1.siemens.de [139.23.33.14]) by david.siemens.de (8.9.3/8.9.3) with ESMTP id KAA16899; Fri, 25 Jun 1999 10:04:01 +0200 (MET DST) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail1.siemens.de (8.9.3/8.9.3) with ESMTP id KAA04730; Fri, 25 Jun 1999 10:04:00 +0200 (MET DST) Received: from alaska.cert.siemens.de (alaska.cert.siemens.de [139.23.202.134]) by mars.cert.siemens.de (8.9.3/8.9.3/Siemens CERT [ $Revision: 1.9 ]) with ESMTP id KAA09950; Fri, 25 Jun 1999 10:04:06 +0200 (CEST) Received: (from ust@localhost) by alaska.cert.siemens.de (8.9.3/8.9.3/alaska [ $Revision: 1.2 ]) id IAA68284; Fri, 25 Jun 1999 08:04:06 GMT (envelope-from ust) Date: Fri, 25 Jun 1999 10:04:06 +0200 From: Udo Schweigert To: Rolf Scheurer Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: AVM Fritz PCI? Message-ID: <19990625100406.A68065@alaska.cert.siemens.de> Mail-Followup-To: Rolf Scheurer , freebsd-isdn@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: ; from Rolf Scheurer on Fri, Jun 25, 1999 at 08:47:37AM +0200 X-Operating-System: FreeBSD 3.2-STABLE Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, Jun 25, 1999 at 08:47:37AM +0200, Rolf Scheurer wrote: > Hi > > I bought a AVM Fritz PCI card, but I couldn't implement it into my system > yet. > Because I couldn't find the specific parameters for it in the documentation, > I tried. > options "AVM_A1" > device isic0 and device isic0 at pci? > > But the system can't find the card with those configurations. > Does somebody know how to implement this card into FreeBSD? > First of all: you need 4.0-CURRENT or i4b-00.81 from http://www.freebsd-support.de/i4b Second: you have to say "AVM_A1_PCI" and "device isic0" in your kernel config. Regards ------------------------------------------------------------------------------- Udo Schweigert || Voice : +49 89 636 42170 Siemens AG, Siemens CERT || Fax : +49 89 636 48000 ZT IK 3 || email : Udo.Schweigert@mchp.siemens.de D-81730 Muenchen / Germany || : ust@cert.siemens.de PGP fingerprint || 2A 53 F6 A6 30 59 64 02 6B C4 E0 73 B2 C9 6C E7 ------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Fri Jun 25 14: 4:35 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from peedub.muc.de (newpc.muc.ditec.de [194.120.126.33]) by hub.freebsd.org (Postfix) with ESMTP id 582DF14D98 for ; Fri, 25 Jun 1999 14:04:24 -0700 (PDT) (envelope-from garyj@peedub.muc.de) Received: from peedub.muc.de (localhost [127.0.0.1]) by peedub.muc.de (8.9.3/8.6.9) with ESMTP id WAA38447; Fri, 25 Jun 1999 22:51:18 +0200 (CEST) Message-Id: <199906252051.WAA38447@peedub.muc.de> X-Mailer: exmh version 2.0.2 2/24/98 To: Udo Schweigert Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: AVM Fritz PCI? Reply-To: Gary Jennejohn In-reply-to: Your message of "Fri, 25 Jun 1999 10:04:06 +0200." <19990625100406.A68065@alaska.cert.siemens.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Fri, 25 Jun 1999 22:51:18 +0200 From: Gary Jennejohn Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Udo Schweigert writes: >On Fri, Jun 25, 1999 at 08:47:37AM +0200, Rolf Scheurer wrote: >> Hi >> >> I bought a AVM Fritz PCI card, but I couldn't implement it into my system >> yet. >> Because I couldn't find the specific parameters for it in the documentation, >> I tried. >> options "AVM_A1" >> device isic0 and device isic0 at pci? >> >> But the system can't find the card with those configurations. >> Does somebody know how to implement this card into FreeBSD? >> > >First of all: you need 4.0-CURRENT or i4b-00.81 from >http://www.freebsd-support.de/i4b > >Second: you have to say "AVM_A1_PCI" and "device isic0" in your kernel >config. > way to go, Udo ! I think all future questions about the Fritz!Card PCI should go to you. ;-) --- Gary Jennejohn Home - garyj@muc.de Work - garyj@fkr.dec.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Sat Jun 26 5:47:20 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from mailout08.btx.dtag.de (mailout08.btx.dtag.de [194.25.2.156]) by hub.freebsd.org (Postfix) with ESMTP id 7991614E40 for ; Sat, 26 Jun 1999 05:47:04 -0700 (PDT) (envelope-from HEilts@t-online.de) Received: from fwd08.btx.dtag.de ([194.25.2.168]) by mailout08.btx.dtag.de with smtp id 10xrrH-0001ap-00; Sat, 26 Jun 1999 14:46:59 +0200 Received: from tor.muc.de (08974299733-0002(btxid)@[193.159.111.201]) by fwd08.btx.dtag.de with smtp id ; Sat, 26 Jun 1999 14:46:54 +0200 Received: from donar.muc.de (donar.muc.de [193.31.20.4]) by tor.muc.de (8.9.2/8.9.3) with ESMTP id OAA04518 for ; Sat, 26 Jun 1999 14:41:00 +0200 (CEST) Date: Sat, 26 Jun 1999 14:35:43 +0200 To: freebsd-isdn@freebsd.org Subject: i4b and i4l loops in LCP Message-ID: <2694807544.930407743@donar.muc.de> Originator-Info: login-id=eilts; server=193.31.20.1 X-Mailer: Mulberry (Win32) [1.4.3, s/n U-301244] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Sender: 08974299733-0002@t-online.de From: HEilts@t-online.de (Hinrich Eilts) Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I use i4b 0.81 (FritzCard PCI) on FreeBSD 3.1 for PAP based dial-in. Trying Win95 as a client works fine, but a Linux i4l client loops in LCP: Jun 26 13:50:55 tor /kernel: isp0: Up event(incoming call) Jun 26 13:50:55 tor /kernel: isp0: lcp open(initial) Jun 26 13:50:55 tor /kernel: isp0: phase establish Jun 26 13:50:55 tor /kernel: isp0: lcp up(starting) Jun 26 13:50:55 tor /kernel: isp0: lcp output Jun 26 13:50:55 tor /kernel: isp0: lcp input(req-sent): Jun 26 13:50:55 tor /kernel: isp0: lcp parse opts: mru magic Jun 26 13:50:55 tor /kernel: isp0: lcp parse opt values: mru 1524 magic 0x2db6d2a8 send conf-ack Jun 26 13:50:55 tor /kernel: isp0: lcp output Jun 26 13:50:57 tor /kernel: isp0: lcp input(ack-sent): Jun 26 13:50:57 tor /kernel: isp0: lcp parse opts: mru magic Jun 26 13:50:57 tor /kernel: isp0: lcp parse opt values: mru 1524 magic 0x2db6d2a8 send conf-ack Jun 26 13:50:57 tor /kernel: isp0: lcp output Jun 26 13:50:59 tor /kernel: isp0: lcp input(ack-sent): Jun 26 13:50:59 tor /kernel: isp0: lcp parse opts: mru magic Jun 26 13:50:59 tor /kernel: isp0: lcp parse opt values: mru 1524 magic 0x2db6d2a8 send conf-ack Jun 26 13:50:59 tor /kernel: isp0: lcp output .. .. .. Jun 26 13:51:38 tor /kernel: isp0: lcp input(ack-sent): Jun 26 13:51:38 tor /kernel: isp0: lcp parse opts: mru magic Jun 26 13:51:38 tor /kernel: isp0: lcp parse opt values: mru 1524 magic 0x2db6d2a8 send conf-ack Jun 26 13:51:38 tor /kernel: isp0: lcp output Jun 26 13:51:39 tor /kernel: isp0: lcp down(ack-sent) Jun 26 13:51:39 tor /kernel: isp0: Down event (carrier loss) Jun 26 13:51:39 tor /kernel: isp0: lcp close(starting) Jun 26 13:51:39 tor /kernel: isp0: phase dead The session was finished by remote site hang up. What is wrong? Hinrich To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Sat Jun 26 8:24:14 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from smtp.kolumbus.fi (smtp.kolumbus.fi [193.229.0.51]) by hub.freebsd.org (Postfix) with ESMTP id 3C48D14F15 for ; Sat, 26 Jun 1999 08:24:10 -0700 (PDT) (envelope-from andras@kolumbus.fi) Received: from icebreaker.kolumbus.fi (kg211u1hel.dial.kolumbus.fi [193.229.14.211]) by smtp.kolumbus.fi (8.9.0/8.9.0) with SMTP id SAA01022 for ; Sat, 26 Jun 1999 18:24:54 +0300 (EET DST) Message-ID: <3774F1B2.446B9B3D@kolumbus.fi> Date: Sat, 26 Jun 1999 18:28:50 +0300 From: Andras Wappel Organization: Hackers X-Mailer: Mozilla 3.04Gold (X11; I; FreeBSD 3.1-RELEASE i386) MIME-Version: 1.0 To: freebsd-isdn@freebsd.org Subject: hisaddr problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello ISDN people, I have a Teles 16.3 rev 1.1 and ISDN syncppp connection works nice in win95 and linux, but I have some problems under freebsd 3.1 STABLE, with built in i4b driver: Sometimes I cannot connect (internet-wise), because I don't seem to accept the gateway address (?): Jun 26 17:02:40 icebreaker /kernel: isp0: phase authenticate Jun 26 17:02:40 icebreaker /kernel: isp0: pap output Jun 26 17:02:40 icebreaker /kernel: isp0: pap success Jun 26 17:02:40 icebreaker /kernel: isp0: phase network Jun 26 17:02:40 icebreaker /kernel: isp0: ipcp open(initial) Jun 26 17:02:40 icebreaker /kernel: isp0: ipcp up(starting) Jun 26 17:02:40 icebreaker /kernel: isp0: ipcp output Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp input(req-sent): Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opts: address Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opt values: address 193.229.42.1 [not agreed] send conf-nak ^^^^^^^^^^^^^ Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp output Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp input(req-sent): Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opts: Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opt values: still need hisaddr send conf-nak Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp output Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp input(req-sent): Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opts: Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opt values: still need hisaddr send conf-nak Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp output Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp input(req-sent): Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opts: Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opt values: still need hisaddr send conf-nak Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp output Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp input(req-sent): Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opts: Jun 26 17:02:41 icebreaker /kernel: isp0: ipcp parse opt values: still need hisaddr send conf-nak ( ... ad infinitum ) My spppcontrol lines from /etc/rc.isdn: ifconfig isp0 link1 0.0.0.0 193.229.10.1 netmask 0xffffff00 debug ifconfig isp0 down spppcontrol isp0 authproto=pap myauthname='mylogin' myauthsecret='mypass' callin hisauthproto=none So what should I change so I can accept any gateway address, not just 193.229.10.1 ? Or is the problem something else ? Thanks for your help, Andras To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Sat Jun 26 11:15:47 1999 Delivered-To: freebsd-isdn@freebsd.org Received: from linteuto.teuto.de (dns1.teuto.net [194.77.23.26]) by hub.freebsd.org (Postfix) with ESMTP id 069EB14F3A for ; Sat, 26 Jun 1999 11:15:36 -0700 (PDT) (envelope-from martin@rumolt.teuto.de) Received: from rumolt.teuto.de (root@rumolt.teuto.de [212.8.203.81]) by linteuto.teuto.de (8.8.7/8.8.7) with ESMTP id UAA04928; Sat, 26 Jun 1999 20:15:31 +0200 Received: from martins (hwart.teuto.de [212.8.203.83]) by rumolt.teuto.de (8.8.8/8.8.7) with SMTP id UAA17746; Sat, 26 Jun 1999 20:12:18 +0200 (MEST) From: "Martin Husemann" To: "Hinrich Eilts" , Subject: RE: i4b and i4l loops in LCP Date: Sat, 26 Jun 1999 20:12:18 +0200 Message-ID: <000a01bebfff$6d1ebfd0$53cb08d4@martins.teuto.de> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <2694807544.930407743@donar.muc.de> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > What is wrong? Replace if_spppsubr.c by an older revision (i.e. the one distributed in the NetBSD 1.4 Source tree under src/sys/net). This will most probably fix it. Severe bugs have been introduced in the later version distributed with i4b 0.81 (but other bugs have been fixed, so Hellmuth doesn't like to revert to the old revision completeley). Anyone that can reproduce this on a non-mission-critical-system is very welcome to experiment what exactly is causing this. It happens only in rare circumstances, but when it happens it shows up "reliably". Martin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message