From owner-freebsd-smp Mon Jan 25 10:22:33 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA19394 for freebsd-smp-outgoing; Mon, 25 Jan 1999 10:22:33 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from o-o.org (o-o.org [207.252.201.100]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA19388 for ; Mon, 25 Jan 1999 10:22:30 -0800 (PST) (envelope-from licia@o-o.org) Received: from localhost (root@localhost) by o-o.org (8.8.8/8.8.7) with SMTP id MAA28951 for ; Mon, 25 Jan 1999 12:22:22 -0600 (CST) Date: Mon, 25 Jan 1999 12:22:21 -0600 (CST) From: Licia To: smp@FreeBSD.ORG Subject: Re: smp and clustering In-Reply-To: <199901212119.PAA14532@xa.rich.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I would like to thank everyone who replied to my question. It turns out that clustering was only partially applicable to what I had in mind. I'm going to need to do quite a lot of research, and won't bother y'all with it anymore. :) Thanks again :) [ licia@o-o.org ] [ http://www.o-o.org/~licia/ ] [ Alias : Ladywolf] [ Telnet to o-o.org and log in as bbs ] [ http://www.o-o.org/ ] [ A happy user of FreeBSD : http://www.freebsd.org/ ] [ FreeBSD : The last Windows upgrade you'll ever need. [ This user boycotts all Microsoft products and services ] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 11:41:36 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA29413 for freebsd-smp-outgoing; Mon, 25 Jan 1999 11:41:36 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from rfc.comm.harris.com (adm01.rfc.comm.harris.com [147.177.128.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA29387 for ; Mon, 25 Jan 1999 11:41:29 -0800 (PST) (envelope-from bad2@rfc.comm.harris.com) Received: (from bad2@localhost) by rfc.comm.harris.com (8.9.1/8.9.1) id OAA23762 for smp@freebsd.org; Mon, 25 Jan 1999 14:41:24 -0500 Date: Mon, 25 Jan 1999 14:41:24 -0500 From: Bernard A Doehner Message-Id: <199901251941.OAA23762@rfc.comm.harris.com> To: smp@FreeBSD.ORG Subject: dual Xeon 512K board recommendations. Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Gang: Thanks for your prior comments confirming what I had told my boss regarding 2.2 lack of SMP support.. Are any of you currently running 400 Mhz. dual Xeon (512K's) motherboards with 3.0-RELEASE? I'd like to get some recommendations on properly working hardware.. THANKS! Bernie bad@wireless.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 11:50:54 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA00816 for freebsd-smp-outgoing; Mon, 25 Jan 1999 11:50:54 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from rfc.comm.harris.com (adm01.rfc.comm.harris.com [147.177.128.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA00801 for ; Mon, 25 Jan 1999 11:50:51 -0800 (PST) (envelope-from bad2@rfc.comm.harris.com) Received: (from bad2@localhost) by rfc.comm.harris.com (8.9.1/8.9.1) id OAA173074 for smp@freebsd.org; Mon, 25 Jan 1999 14:50:47 -0500 Date: Mon, 25 Jan 1999 14:50:47 -0500 From: Bernard A Doehner Message-Id: <199901251950.OAA173074@rfc.comm.harris.com> To: smp@FreeBSD.ORG Subject: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi again: Given that I don't have an AT case yet and a lot of SIMM's, a dual Pentium Pro 200 motherboard + CPU's especialy if I can still get 512K's or 1M's would also be of interest... Any of you interested in selling your old dual PPro motherboard + CPU? Thanks Bernie bad@wireless.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 13:17:11 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id NAA12329 for freebsd-smp-outgoing; Mon, 25 Jan 1999 13:17:11 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from hobbiton.shire.net (hobbiton.shire.net [204.228.145.250]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id NAA12218 for ; Mon, 25 Jan 1999 13:17:07 -0800 (PST) (envelope-from seth@pengar.com) Received: from cz-cblk-150-9-135.cyberzone.net ([209.150.9.135] helo=[192.168.0.2]) by hobbiton.shire.net with esmtp (Exim 2.04 #4) id 104tNU-0004wy-00; Mon, 25 Jan 1999 14:17:01 -0700 X-Sender: seth-pc@hobbiton.shire.net Message-Id: In-Reply-To: <199901251950.OAA173074@rfc.comm.harris.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 25 Jan 1999 16:17:44 -0700 To: Bernard A Doehner From: Seth Leigh Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Cc: freebsd-smp@FreeBSD.ORG Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org First off, Pentium Pros require ATX cases (at least all of the PPros of which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos of which I am aware (I am no connosieur of PPro mobos, but I do have one, and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I want to buy more while they can still be found. In addition, the days of a few months back of relatively cheap PPros are essentially over. I paid $94 apiece for my two 256k 180 MHz PPros six or eight months back, and I just saw that the cheapest these can be had today is something like $125 or more. I just checked, and real 200 MHz PPros, even the 256k ones, start at $300 from the cheapest sites listed on www.pricewatch.com. The 512k 200 MHz PPros I saw listed for a minimum of $899 on pricewatch. I saw the lowest price on 1 MB 200 MHz PPros listed as $1299. These are probably outdated prices, but people aren't really buying these things anymore, so the price lists aren't really being actively maintained. Now, you could probably find some of these chips in private hands, whose owners would be willing to sell them to you for a lot less. I don't think it would be worth it. My dual 180 MHz PPro system (which I run at 200 MHz) was a kickass deal when I put it together eight months ago. Today, you are better off just buying two PII 350s for $200 each or so, and an ASUS P2B-D to run them on. That will be a great system, and significantly more powerful than a dual PPro. You would probably pay a little more for it than I paid at the time, but get a much faster system. That said, if you make me an offer on my Intel PR440FX dual PPro mobo (with included 64 MB EDO DIMM and two 180 MHz PPros that is good enough that for just a little more of my own dough I can turn around and buy two PII 350s and an ASUS P2B-D, I'd be happy to sell them to you. ;-) Seth >Hi again: > >Given that I don't have an AT case yet and a lot of SIMM's, >a dual Pentium Pro 200 motherboard + CPU's especialy if I can still >get 512K's or 1M's would also be of interest... > >Any of you interested in selling your old dual PPro motherboard + CPU? > >Thanks > >Bernie >bad@wireless.net > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-smp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 13:34:01 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id NAA14356 for freebsd-smp-outgoing; Mon, 25 Jan 1999 13:34:01 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from panzer.plutotech.com (panzer.plutotech.com [206.168.67.125]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id NAA14334 for ; Mon, 25 Jan 1999 13:33:58 -0800 (PST) (envelope-from ken@panzer.plutotech.com) Received: (from ken@localhost) by panzer.plutotech.com (8.9.2/8.8.5) id OAA27695; Mon, 25 Jan 1999 14:33:35 -0700 (MST) From: "Kenneth D. Merry" Message-Id: <199901252133.OAA27695@panzer.plutotech.com> Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. In-Reply-To: from Seth Leigh at "Jan 25, 99 04:17:44 pm" To: seth@pengar.com (Seth Leigh) Date: Mon, 25 Jan 1999 14:33:35 -0700 (MST) Cc: bad2@rfc.comm.harris.com, freebsd-smp@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL28s (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Seth Leigh wrote... > First off, Pentium Pros require ATX cases (at least all of the PPros of > which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos > of which I am aware (I am no connosieur of PPro mobos, but I do have one, > and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 > volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I > want to buy more while they can still be found. Uhh, not quite. I've got an ASUS P/I-P65UP5 w/ C-P6ND. It's an AT form factor board, and takes standard 60ns FPM SIMMs. It can also handle EDO, I think. Ken -- Kenneth Merry ken@plutotech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 13:37:24 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id NAA15039 for freebsd-smp-outgoing; Mon, 25 Jan 1999 13:37:24 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from oreo.adsu.bellsouth.com (oreo.adsu.bellsouth.com [205.152.173.36]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id NAA15034 for ; Mon, 25 Jan 1999 13:37:21 -0800 (PST) (envelope-from ck@oreo.adsu.bellsouth.com) Received: (from ck@localhost) by oreo.adsu.bellsouth.com (8.9.1/8.9.1) id QAA13365; Mon, 25 Jan 1999 16:36:57 -0500 (EST) (envelope-from ck) Date: Mon, 25 Jan 1999 16:36:57 -0500 From: Christian Kuhtz To: Bernard A Doehner Cc: smp@FreeBSD.ORG Subject: Re: dual Xeon 512K board recommendations. Message-ID: <19990125163657.J2778@oreo.adsu.bellsouth.com> References: <199901251941.OAA23762@rfc.comm.harris.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95i In-Reply-To: <199901251941.OAA23762@rfc.comm.harris.com>; from Bernard A Doehner on Mon, Jan 25, 1999 at 02:41:24PM -0500 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Yep, ran 3.0-RELEASE, 3.0-CURRENT and now 4.0-CURRENT on an 2x450MHz Xeon (not sure whether we bought 512K or 1MB Xeons) Dell Precision 610. Works great. Pretty much out of the box (save the Adaptec RAID daughter card (which I don't need anyways) and mondo soundcard (TurtleBeach or whatever). Cheers, Chris On Mon, Jan 25, 1999 at 02:41:24PM -0500, Bernard A Doehner wrote: > Hi Gang: > > Thanks for your prior comments confirming what I had told my boss regarding 2.2 > lack of SMP support.. > > Are any of you currently running 400 Mhz. dual Xeon (512K's) > motherboards with 3.0-RELEASE? > > I'd like to get some recommendations on properly working hardware.. > > THANKS! > > Bernie > bad@wireless.net > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > -- "Be careful of reading health books, you might die of a misprint." -- Mark Twain [Disclaimer: I speak for myself and my views are my own and not in any way to be construed as the views of BellSouth Corporation. ] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 14:33:11 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA23444 for freebsd-smp-outgoing; Mon, 25 Jan 1999 14:33:11 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from picnic.mat.net (b133.mat.net [206.246.122.133] (may be forged)) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA23433 for ; Mon, 25 Jan 1999 14:33:06 -0800 (PST) (envelope-from chuckr@mat.net) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.9.1/8.8.5) with ESMTP id RAA72160; Mon, 25 Jan 1999 17:31:20 -0500 (EST) Date: Mon, 25 Jan 1999 17:31:20 -0500 (EST) From: Chuck Robey To: "Kenneth D. Merry" cc: Seth Leigh , bad2@rfc.comm.harris.com, freebsd-smp@FreeBSD.ORG Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. In-Reply-To: <199901252133.OAA27695@panzer.plutotech.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 25 Jan 1999, Kenneth D. Merry wrote: > Seth Leigh wrote... > > First off, Pentium Pros require ATX cases (at least all of the PPros of > > which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos > > of which I am aware (I am no connosieur of PPro mobos, but I do have one, > > and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 > > volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I > > want to buy more while they can still be found. > > Uhh, not quite. I've got an ASUS P/I-P65UP5 w/ C-P6ND. It's an AT form > factor board, and takes standard 60ns FPM SIMMs. It can also handle EDO, I > think. Same thing here, Tyan Titan II, 2 ea PPro 512K cache, AT case. All the rest as above too. Uses simms. > > Ken > -- > Kenneth Merry > ken@plutotech.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic (FreeBSD-current) (301) 220-2114 | and jaunt (NetBSD). ----------------------------+----------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 14:49:08 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA25538 for freebsd-smp-outgoing; Mon, 25 Jan 1999 14:49:08 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from ra.eng.mindspring.net (ra.eng.mindspring.net [207.69.192.184]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id OAA25520 for ; Mon, 25 Jan 1999 14:49:04 -0800 (PST) (envelope-from sj@ra.eng.mindspring.net) Received: (qmail 995 invoked by uid 52477); 25 Jan 1999 22:49:03 -0000 To: Seth Leigh Cc: Bernard A Doehner , freebsd-smp@FreeBSD.ORG Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. References: <199901251950.OAA173074@rfc.comm.harris.com> From: Sudish Joseph Date: 25 Jan 1999 17:49:02 -0500 In-Reply-To: Seth Leigh's message of "Mon, 25 Jan 1999 16:17:44 -0700" Message-ID: Lines: 23 User-Agent: Gnus/5.070066 (Pterodactyl Gnus v0.66) XEmacs/21.0 (Poitou) Mime-Version: 1.0 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Seth Leigh writes: > and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 > volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I > want to buy more while they can still be found. I bought a 128MB DIMM a couple of months back from here: http://www.microx-press.com/online/product.asp?dept%5Fid=1200&sku=MEMGN129 I found this at http://www.shopper.com still lists PR440FX in their memory page: http://www.shopper.com/generic.html?st.sh.fd.mem.ram > That said, if you make me an offer on my Intel PR440FX dual PPro > mobo (with included 64 MB EDO DIMM and two 180 MHz PPros that is > good enough that for just a little more of my own dough I can turn > around and buy two PII 350s and an ASUS P2B-D, I'd be happy to sell > them to you. ;-) Ditto here. :-) I think I'd go for a oc'ed Celeron 300A, though. Or one of the new 400MHz Celerons that Intel's announced. -- Sudish Joseph MindSpring Enterprises To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 15:00:57 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA27199 for freebsd-smp-outgoing; Mon, 25 Jan 1999 15:00:57 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from www1.asacomputers.com ([204.153.176.244]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA27191 for ; Mon, 25 Jan 1999 15:00:56 -0800 (PST) (envelope-from kedar@asacomputers.com) Received: from kedar.asacomputers.com (kedar.asacomputers.com [204.153.176.86]) by www1.asacomputers.com (8.8.8/8.8.8) with SMTP id PAA23566; Mon, 25 Jan 1999 15:06:39 -0800 (PST) (envelope-from kedar@asacomputers.com) Message-Id: <2.2.32.19990125225602.0149aa90@gw1> X-Sender: rajadnya@gw1 X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 25 Jan 1999 14:56:02 -0800 To: Seth Leigh From: Kedar Rajadnya Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Cc: freebsd-smp@FreeBSD.ORG Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 04:17 PM 1/25/99 -0700, you wrote: >First off, Pentium Pros require ATX cases (at least all of the PPros of >which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos >of which I am aware (I am no connosieur of PPro mobos, but I do have one, >and have seen some others) use DIMMs, not SIMMs. Hi, The Tyan 1662, the Supermicro P6DNF and DNE, and the Asus P6NP5(I think), are/were all AT boards. All used SIMMS. All have dual-CPU capability. Take care, :-) Kedar Rajadnya. ASA Computers, Inc. 200 East Trimble Road. San Jose, CA 95131. TEL: (408)232-5999 ext201 CELL: (408)799-7263 FAX:(408)232-5959 ****************************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 15:17:21 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA00150 for freebsd-smp-outgoing; Mon, 25 Jan 1999 15:17:21 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from hobbiton.shire.net (hobbiton.shire.net [204.228.145.250]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA00129 for ; Mon, 25 Jan 1999 15:17:18 -0800 (PST) (envelope-from seth@pengar.com) Received: from cz-cblk-150-9-140.cyberzone.net ([209.150.9.140] helo=[192.168.0.2]) by hobbiton.shire.net with esmtp (Exim 2.04 #4) id 104vFn-00059v-00; Mon, 25 Jan 1999 16:17:12 -0700 X-Sender: seth-pc@hobbiton.shire.net Message-Id: In-Reply-To: <199901252133.OAA27695@panzer.plutotech.com> References: from Seth Leigh at "Jan 25, 99 04:17:44 pm" Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 25 Jan 1999 18:17:59 -0700 To: "Kenneth D. Merry" From: Seth Leigh Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Cc: freebsd-smp@FreeBSD.ORG Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, I stand corrected. I had seen a number of different Pentium Pro motherboards, all of which were ATX boards. I remember being in a computer store (not like CompUSA, more of a place where the customer goes in and orders a custom box) where a customer was looking for a Pentium Pro board and chips, and the guy told him that the PPro boards he had were all ATX form factor, and that he had just run out of ATX cases (I think ATX cases were still pretty new at this time). Then, last spring, I bought my own Intel PR440FX, which is ATX and uses the funky DIMMs, and compared notes with a couple of other folks who had bought other dual PPro boards, which were also ATX. I didn't remember ever seeing a non ATX mobo, but then again I didn't really do extensive research into the subject. I guess the old saying is true: "Never say Never." Seth >Seth Leigh wrote... >> First off, Pentium Pros require ATX cases (at least all of the PPros of >> which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos >> of which I am aware (I am no connosieur of PPro mobos, but I do have one, >> and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 >> volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I >> want to buy more while they can still be found. > >Uhh, not quite. I've got an ASUS P/I-P65UP5 w/ C-P6ND. It's an AT form >factor board, and takes standard 60ns FPM SIMMs. It can also handle EDO, I >think. > >Ken >-- >Kenneth Merry >ken@plutotech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 18:12:28 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA29249 for freebsd-smp-outgoing; Mon, 25 Jan 1999 18:12:28 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from schizo.cdsnet.net (schizo.cdsnet.net [204.118.244.32]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA29244 for ; Mon, 25 Jan 1999 18:12:24 -0800 (PST) (envelope-from mrcpu@internetcds.com) Received: from localhost (mrcpu@localhost) by schizo.cdsnet.net (8.8.8/8.7.3) with SMTP id RAA15514; Mon, 25 Jan 1999 17:58:59 -0800 (PST) Date: Mon, 25 Jan 1999 17:58:59 -0800 (PST) From: Jaye Mathisen X-Sender: mrcpu@schizo.cdsnet.net To: Chuck Robey cc: "Kenneth D. Merry" , Seth Leigh , bad2@rfc.comm.harris.com, freebsd-smp@FreeBSD.ORG Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Same here. SuperMicro P6-DNE/DNF. AT mb, not ATX. On Mon, 25 Jan 1999, Chuck Robey wrote: > On Mon, 25 Jan 1999, Kenneth D. Merry wrote: > > > Seth Leigh wrote... > > > First off, Pentium Pros require ATX cases (at least all of the PPros of > > > which I am aware use ATX cases), not AT cases. Also, all of the PPro mobos > > > of which I am aware (I am no connosieur of PPro mobos, but I do have one, > > > and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 > > > volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I > > > want to buy more while they can still be found. > > > > Uhh, not quite. I've got an ASUS P/I-P65UP5 w/ C-P6ND. It's an AT form > > factor board, and takes standard 60ns FPM SIMMs. It can also handle EDO, I > > think. > > Same thing here, Tyan Titan II, 2 ea PPro 512K cache, AT case. All the > rest as above too. Uses simms. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Mon Jan 25 21:26:47 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA03776 for freebsd-smp-outgoing; Mon, 25 Jan 1999 21:26:47 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from sakaki.communique.net (sakaki.communique.net [204.27.64.202]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA03769 for ; Mon, 25 Jan 1999 21:26:44 -0800 (PST) (envelope-from gjohnson@gs.verio.net) Received: from tony (ppp-204-0-253-82.ne.communique.net [204.0.253.82]) by sakaki.communique.net (8.8.8/8.8.8) with SMTP id XAA02056; Mon, 25 Jan 1999 23:26:32 -0600 (CST) From: "Tony Johnson" To: "Sudish Joseph" , "Seth Leigh" Cc: "Bernard A Doehner" , Subject: RE: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Date: Mon, 25 Jan 1999 23:26:46 -0600 Message-ID: <000001be48ec$77748800$01646464@communique.net> MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2232.26 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.00.0810.800 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Last time I checked www.motherboardx.com still sold Tyan and Supermicro Ppro motherboards and Cpu's. They have ppro motherboards in at and atx form factor -----Original Message----- From: owner-freebsd-smp@FreeBSD.ORG [mailto:owner-freebsd-smp@FreeBSD.ORG] On Behalf Of Sudish Joseph Sent: Monday, January 25, 1999 4:49 PM To: Seth Leigh Cc: Bernard A Doehner; freebsd-smp@FreeBSD.ORG Subject: Re: Another possibility... dual Pentium Pro 200's with 512K or 1M cache. Seth Leigh writes: > and have seen some others) use DIMMs, not SIMMs. My mobo requires 3.3 > volt, buffered, ECC EDO DIMMs, which are getting more and more rare. I > want to buy more while they can still be found. I bought a 128MB DIMM a couple of months back from here: http://www.microx-press.com/online/product.asp?dept%5Fid=1200&sku=MEMGN129 I found this at http://www.shopper.com still lists PR440FX in their memory page: http://www.shopper.com/generic.html?st.sh.fd.mem.ram > That said, if you make me an offer on my Intel PR440FX dual PPro > mobo (with included 64 MB EDO DIMM and two 180 MHz PPros that is > good enough that for just a little more of my own dough I can turn > around and buy two PII 350s and an ASUS P2B-D, I'd be happy to sell > them to you. ;-) Ditto here. :-) I think I'd go for a oc'ed Celeron 300A, though. Or one of the new 400MHz Celerons that Intel's announced. -- Sudish Joseph MindSpring Enterprises To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Wed Jan 27 20:39:05 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA08700 for freebsd-smp-outgoing; Wed, 27 Jan 1999 20:39:05 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from panzer.plutotech.com (panzer.plutotech.com [206.168.67.125]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id UAA08687 for ; Wed, 27 Jan 1999 20:39:01 -0800 (PST) (envelope-from ken@panzer.plutotech.com) Received: (from ken@localhost) by panzer.plutotech.com (8.9.2/8.8.5) id VAA00675 for smp@FreeBSD.ORG; Wed, 27 Jan 1999 21:39:00 -0700 (MST) From: "Kenneth D. Merry" Message-Id: <199901280439.VAA00675@panzer.plutotech.com> Subject: interesting panic, probably PCI code To: smp@FreeBSD.ORG Date: Wed, 27 Jan 1999 21:39:00 -0700 (MST) X-Mailer: ELM [version 2.4ME+ PL28s (25)] MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=ELM917498340-613-0_ Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --ELM917498340-613-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit I got this panic tonight while trying to add USB support to my kernel. The code I'm running is from just before the -current/-stable split, probably about January 19th. This doesn't happen when I don't enable USB support in my kernel. Attached is a stack trace, as well as the output of mptable -dmesg -verbose, and my config file. I'll probably look at it some more, but I figured that someone more familiar with the code might see the problem right off. :) Ken -- Kenneth Merry ken@plutotech.com --ELM917498340-613-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=panzer.panic.012799 Content-Description: panzer.panic.012799 Content-Transfer-Encoding: 7bit BIOS basemem: 639K, extmem: 195584K (from 0xe801 call) BIOS extmem (65472K) != RTC extmem (195584K) Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Wed Jan 27 21:02:51 MST 1999 ken@panzer.plutotech.com:/usr/home/ken/perforce/cam/sys/compile/panzer Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff real memory = 201326592 (196608K bytes) avail memory = 192417792 (187908K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel.new" at 0xf0309000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 uhci0: rev 0x01 int d irq 14 on pci0.1.2 kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode mp_lock = 00000002; cpuid = 0; lapic.id = 01000000 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x8:0xf0229814 stack pointer = 0x10:0xf0315e18 frame pointer = 0x10:0xf0315e38 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 0 () interrupt mask = net tty bio cam <- SMP: XXX kernel: type 12 trap, code=0 Stopped at INTREN+0x2c: movl %ecx,0(%edx) db> trace INTREN(e,f020b1c4,f0f64000,f0289118,0) at INTREN+0x2c add_intrdesc(f0f5fec0,4000,f02867c4,f0f64000,e) at add_intrdesc+0x29 intr_connect(f0f5fec0,ffffffff,e,f020b1c4,f0f64000,f0289118,0) at intr_connect+0x2e pci_map_int_right(f091d688,f020b1c4,f0f64000,f0289118,0) at pci_map_int_right+0x31 pci_map_int(f091d688,f020b1c4,f0f64000,f0289118,f091d688,20) at pci_map_int+0x16 uhci_pci_attach(f091d688,0) at uhci_pci_attach+0x75 pci_drvattach(f091d680,f091d680,0,7,f0315f68) at pci_drvattach+0x5f pci_addcfg(f091d680,0,0,31d000,0) at pci_addcfg+0xcf pci_probebus(0,f0264bda,0) at pci_probebus+0x53 pci_probe(0,f0315f98,f022194b,f0315fac,f0143ed3) at pci_probe+0x39 pci_configure(f0315fac,f0143ed3,0,313f00,31d000) at pci_configure+0xa configure(0) at configure+0x1b main(f0315fb8,f015a0fd,f0403000,8000,8000) at main+0x83 begin() at begin+0x55 db> --ELM917498340-613-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=panzer.mptable.012799 Content-Description: panzer.mptable.012799 Content-Transfer-Encoding: 7bit =============================================================================== MPTable, version 2.0.15 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f800 (638K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000f60b0 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f60b0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x8b mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f5caa signature: 'PCMP' base table length: 300 version: 1.4 checksum: 0x1a OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 29 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x11 BSP, usable 6 1 7 0xfbff 0 0x11 AP, usable 6 1 7 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 5 2 5 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT conforms conforms 2 8 2 8 INT conforms conforms 2 9 2 9 INT conforms conforms 2 10 2 10 INT conforms conforms 2 11 2 11 INT conforms conforms 2 12 2 12 INT conforms conforms 2 15 2 15 INT active-lo level 1 4:A 2 19 INT active-lo level 1 5:A 2 16 INT active-lo level 0 10:A 2 18 INT active-lo level 0 12:A 2 16 INT active-lo level 0 11:A 2 17 INT active-lo level 0 13:A 2 19 INT active-lo level 0 1:A 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 2 0 255 1 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Thu Jan 21 21:10:23 MST 1999 ken@panzer.plutotech.com:/usr/home/ken/perforce/cam/sys/compile/panzer Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff real memory = 201326592 (196608K bytes) avail memory = 192475136 (187964K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xf02fb000. DEVFS: ready for devices Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 chip2: rev 0x02 on pci0.9.0 de0: rev 0x11 int a irq 18 on pci0.10.0 de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.1 de0: address 00:00:c0:5c:d2:be de0: enabling 10baseT port bktr0: rev 0x11 int a irq 17 on pci0.11.0 bti2c0: iicbb0: on bti2c0 iicbus0: on iicbb0 master-only iicsmb0: on iicbus0 smbus0: on iicsmb0 smb0: on smbus0 iic0: on iicbus0 smbus1: on bti2c0 smb1: on smbus1 Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo. de1: rev 0x12 int a irq 16 on pci0.12.0 de1: SMC 9332DST 21140 [10-100Mb/s] pass 1.2 de1: address 00:00:c0:53:3d:e7 de1: enabling 10baseT port vga0: rev 0x01 int a irq 19 on pci0.13.0 Probing for devices on PCI bus 1: ahc0: rev 0x00 int a irq 19 on pci1.4.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x00 int a irq 16 on pci1.5.0 ahc1: aic7880 Wide Channel B, SCSI Id=7, 16/255 SCBs Probing for PnP devices: CSN 1 Vendor ID: GRV0001 [0x0100561e] Serial 0x00000001 Comp ID: PNPb02f [0x2fb0d041] mss_attach 1 at 0x328 irq 11 dma 6:5 flags 0x15 pcm1 (GusPnP sn 0x00000001) at 0x328-0x32f irq 11 drq 6 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x30 on isa sio0: type 16550A, console sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in pcm0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface DEVFS: ready to run APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging limited to 100 packets/entry Waiting 2 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8705MB (17829870 512 byte sectors: 255H 63S/T 1109C) changing root device to da0s2a ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates cd0 at ahc1 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.0MB/s transfers (10.0MHz, offset 15) cd0: cd present [209537 x 2048 byte records] (da0:ahc0:0:0:0): tagged openings now 31 (da0:ahc0:0:0:0): tagged openings now 30 (da1:ahc1:0:1:0): tagged openings now 64 (da0:ahc0:0:0:0): tagged openings now 29 (da0:ahc0:0:0:0): tagged openings now 28 (da0:ahc0:0:0:0): tagged openings now 27 (da0:ahc0:0:0:0): tagged openings now 26 (da0:ahc0:0:0:0): tagged openings now 25 (da0:ahc0:0:0:0): tagged openings now 24 =============================================================================== --ELM917498340-613-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=panzer.config.012799 Content-Description: panzer.config.012799 Content-Transfer-Encoding: 7bit # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.77.2.1 1996/12/21 02:10:50 se Exp $ machine "i386" # cpu "I386_CPU" # cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident panzer maxusers 128 # options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] # options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console # options USERCONFIG #boot -c editor # options VISUAL_USERCONFIG #visual boot -c editor #options CHILD_MAX=128 #options OPEN_MAX=128 options SYSVSHM options SYSVSEM options SYSVMSG options KTRACE options MROUTING options IPFIREWALL options IPFIREWALL_VERBOSE options "IPFIREWALL_VERBOSE_LIMIT=100" options IPDIVERT #options DEVFS #options "MAXMEM=(192*1024)" options "VM86" options MAXCONS=16 options AHC_ALLOW_MEMIO options SMP # Symmetric MultiProcessor Kernel #options SMP_AUTOSTART # crank up SMP automagically options APIC_IO # Symmetric (APIC) I/O options NCPU=2 # number of CPUs options NBUS=3 # number of busses options NAPIC=1 # number of IO APICs options NINTR=24 # number of INTs #options SMP_INVLTLB # options COMPAT_LINUX options DDB options "MSGBUF_SIZE=32768" options CONSPEED=115200 options SOFTUPDATES config kernel root on da0 controller isa0 # controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. controller ahc0 #options "AHC_FORCE_PIO" # Some motherboards choke on MemI/O, # so use PIO in the ahc driver in the # generic kernel. controller scbus0 device da0 device sa0 device cd0 #Only need one of these, the code dynamically grows # Ken's passthrough SCSI driver device pass0 controller pnp0 device pcm0 at isa? vector pcmintr #controller snd0 #device gus0 at isa? vector gusintr # device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr # *sigh* hard-code the card to a Hauppauge, tuner to Philips NTSC options OVERRIDE_CARD=2 options OVERRIDE_TUNER=4 # Brooktree 848 driver device bktr0 controller smbus0 device smb0 at smbus? controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr #device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio0 at isa? port "IO_COM1" tty flags 0x30 irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? disable port? tty device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # USB support controller uhci0 controller ohci0 controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # device ums0 device ukbd0 device ulpt0 device uhub0 device ucom0 device umodem0 device hid0 device ugen0 # #options USB_DEBUG #options USBVERBOSE # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 # device fxp0 # device vx0 # device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr pseudo-device loop pseudo-device ether pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 3 pseudo-device pty 128 pseudo-device gzip # Exec gzipped a.out's pseudo-device bpfilter 4 pseudo-device snp 3 pseudo-device vn --ELM917498340-613-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Thu Jan 28 14:34:24 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA27571 for freebsd-smp-outgoing; Thu, 28 Jan 1999 14:34:24 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from midten.fast.no (midten.fast.no [195.139.251.11]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA27563 for ; Thu, 28 Jan 1999 14:34:20 -0800 (PST) (envelope-from tegge@fast.no) Received: from fast.no (IDENT:tegge@midten.fast.no [195.139.251.11]) by midten.fast.no (8.9.1/8.9.1) with ESMTP id XAA09140; Thu, 28 Jan 1999 23:19:28 +0100 (CET) Message-Id: <199901282219.XAA09140@midten.fast.no> To: ken@plutotech.com Cc: smp@FreeBSD.ORG Subject: Re: interesting panic, probably PCI code From: Tor.Egge@fast.no In-Reply-To: Your message of "Wed, 27 Jan 1999 21:39:00 -0700 (MST)" References: <199901280439.VAA00675@panzer.plutotech.com> X-Mailer: Mew version 1.70 on Emacs 19.34.1 Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Date: Thu, 28 Jan 1999 23:19:28 +0100 Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > I got this panic tonight while trying to add USB support to my kernel. The > code I'm running is from just before the -current/-stable split, probably > about January 19th. The mp table does not have an entry for the USB host controller, and is thus broken. By applying the following (untested) patch, the panic might be avoided, but interrupt delivery will probably not work for that device until the mp table is corrected or a workaround is found. --------- Index: apic_ipl.s =================================================================== RCS file: /home/ncvs/src/sys/i386/isa/apic_ipl.s,v retrieving revision 1.22 diff -u -r1.22 apic_ipl.s --- apic_ipl.s 1998/09/06 22:41:41 1.22 +++ apic_ipl.s 1998/10/10 19:30:38 @@ -246,12 +246,14 @@ shll $4, %ecx movl CNAME(int_to_apicintpin) + 8(%ecx), %edx movl CNAME(int_to_apicintpin) + 12(%ecx), %ecx + testl %edx, %edx + jz 1f movl %ecx, (%edx) /* write the target register index */ movl 16(%edx), %eax /* read the target register data */ andl $~IOART_INTMASK, %eax /* clear mask bit */ movl %eax, 16(%edx) /* write the APIC register data */ - +1: IMASK_UNLOCK /* exit critical reg */ popfl /* restore old state of EI flag */ ret @@ -276,12 +278,14 @@ shll $4, %ecx movl CNAME(int_to_apicintpin) + 8(%ecx), %edx movl CNAME(int_to_apicintpin) + 12(%ecx), %ecx + testl %edx, %edx + jz 1f movl %ecx, (%edx) /* write the target register index */ movl 16(%edx), %eax /* read the target register data */ orl $IOART_INTMASK, %eax /* set mask bit */ movl %eax, 16(%edx) /* write the APIC register data */ - +1: IMASK_UNLOCK /* exit critical reg */ popfl /* restore old state of EI flag */ ret --------- - Tor Egge To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message From owner-freebsd-smp Thu Jan 28 21:06:15 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA20927 for freebsd-smp-outgoing; Thu, 28 Jan 1999 21:06:15 -0800 (PST) (envelope-from owner-freebsd-smp@FreeBSD.ORG) Received: from panzer.plutotech.com (panzer.plutotech.com [206.168.67.125]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA20919 for ; Thu, 28 Jan 1999 21:06:12 -0800 (PST) (envelope-from ken@panzer.plutotech.com) Received: (from ken@localhost) by panzer.plutotech.com (8.9.2/8.8.5) id WAA00505; Thu, 28 Jan 1999 22:06:04 -0700 (MST) From: "Kenneth D. Merry" Message-Id: <199901290506.WAA00505@panzer.plutotech.com> Subject: Re: interesting panic, probably PCI code In-Reply-To: <199901282219.XAA09140@midten.fast.no> from "Tor.Egge@fast.no" at "Jan 28, 99 11:19:28 pm" To: Tor.Egge@fast.no Date: Thu, 28 Jan 1999 22:06:04 -0700 (MST) Cc: smp@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL28s (25)] MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=ELM917586364-462-0_ Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --ELM917586364-462-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Tor.Egge@fast.no wrote... > > > > I got this panic tonight while trying to add USB support to my kernel. The > > code I'm running is from just before the -current/-stable split, probably > > about January 19th. > > The mp table does not have an entry for the USB host controller, and is > thus broken. > > By applying the following (untested) patch, the panic might be avoided, > but interrupt delivery will probably not work for that device until > the mp table is corrected or a workaround is found. Thanks! That did avoid the panic, and I was able to boot just fine. I also updated the BIOS, and was able to boot with an unpatched kernel. FWIW, I have an ASUS P/I-P65UP5 with a C-P6ND CPU card. The mptable looks different now, I suppose updating the BIOS did the trick. The new mptable and dmesg are attached. Thanks again, Ken -- Kenneth Merry ken@plutotech.com --ELM917586364-462-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=panzer.mptable.012899 Content-Description: panzer.mptable.012899 Content-Transfer-Encoding: 7bit =============================================================================== MPTable, version 2.0.15 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f800 (638K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000f6730 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f6730 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x00 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f632e signature: 'PCMP' base table length: 300 version: 1.4 checksum: 0x7e OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 29 local APIC address: 0xfee00000 extended table length: 124 extended table checksum: 29 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x11 BSP, usable 6 1 7 0xfbff 0 0x11 AP, usable 6 1 7 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 5 2 5 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT conforms conforms 2 8 2 8 INT conforms conforms 2 9 2 9 INT conforms conforms 2 10 2 10 INT conforms conforms 2 11 2 11 INT conforms conforms 2 12 2 12 INT conforms conforms 2 15 2 15 INT active-lo level 0 1:D 2 19 INT active-lo level 1 4:A 2 19 INT active-lo level 1 5:A 2 16 INT active-lo level 0 10:A 2 18 INT active-lo level 0 11:A 2 17 INT active-lo level 0 12:A 2 16 INT active-lo level 0 13:A 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 2 0 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- bus ID: 0 address type: memory address address base: 0xc000000 address range: 0xda7f0000 -- bus ID: 0 address type: prefetch address address base: 0xe67f0000 address range: 0x1810000 -- bus ID: 0 address type: memory address address base: 0xe8000000 address range: 0x18000000 -- bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- bus ID: 2 bus info: 0x01 parent bus ID: 0-- bus ID: 0 address modifier: add predefined range: 0x00000000-- bus ID: 0 address modifier: add predefined range: 0x00000001 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #0: Wed Jan 27 21:02:51 MST 1999 ken@panzer.plutotech.com:/usr/home/ken/perforce/cam/sys/compile/panzer Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff real memory = 201326592 (196608K bytes) avail memory = 192417792 (187908K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel.new" at 0xf0309000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 uhci0: rev 0x01 int d irq 19 on pci0.1.2 chip2: rev 0x02 on pci0.9.0 de0: rev 0x11 int a irq 18 on pci0.10.0 de0: SMC 9332DST 21140 [10-100Mb/s] pass 1.1 de0: address 00:00:c0:5c:d2:be de0: enabling 10baseT port bktr0: rev 0x11 int a irq 17 on pci0.11.0 bti2c0: iicbb0: on bti2c0 iicbus0: on iicbb0 master-only iicsmb0: on iicbus0 smbus0: on iicsmb0 smb0: on smbus0 iic0: on iicbus0 smbus1: on bti2c0 smb1: on smbus1 Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo. de1: rev 0x12 int a irq 16 on pci0.12.0 de1: SMC 9332DST 21140 [10-100Mb/s] pass 1.2 de1: address 00:00:c0:53:3d:e7 de1: enabling 10baseT port vga0: rev 0x01 int a irq 19 on pci0.13.0 Probing for devices on PCI bus 1: ahc0: rev 0x00 int a irq 19 on pci1.4.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x00 int a irq 16 on pci1.5.0 ahc1: aic7880 Wide Channel B, SCSI Id=7, 16/255 SCBs Probing for PnP devices: CSN 1 Vendor ID: GRV0001 [0x0100561e] Serial 0x00000001 Comp ID: PNPb02f [0x2fb0d041] mss_attach 1 at 0x328 irq 11 dma 6:5 flags 0x15 pcm1 (GusPnP sn 0x00000001) at 0x328-0x32f irq 11 drq 6 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x30 on isa sio0: type 16550A, console sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in pcm0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface usb0: uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging limited to 100 packets/entry Waiting 2 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) da1 at ahc1 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8705MB (17829870 512 byte sectors: 255H 63S/T 1109C) changing root device to da0s2a ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates cd0 at ahc1 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.0MB/s transfers (10.0MHz, offset 15) cd0: cd present [248388 x 2048 byte records] (da0:ahc0:0:0:0): tagged openings now 31 (da0:ahc0:0:0:0): tagged openings now 30 =============================================================================== --ELM917586364-462-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message