Date: Tue, 4 Jul 2000 17:27:58 +0200 From: REVAUX NATHALIE <NATHALIE.REVAUX@lanceurs.aeromatra.com> To: "'freebsd-atm@FreeBSD.org'" <freebsd-atm@FreeBSD.org> Subject: FORE PCA200e configuration problem Message-ID: <DC4B3D0E64D6D211B4690004AC4C3844035C1257@muexch1.bs.as>
next in thread | raw e-mail | index | archive | help
Hello,
I've tried to install and configure a ATM FORE PCA200E
card under FreeBSD 3.2 release but it doesn't work.
I think the problem is the load of the microcode.
The microcode pca200e.bin doesn't load even if I've
downloaded several microcodes as indicated
in /usr/share/examples/atm.
I tried also to load microcode in manual manner :
pc-edison-10# fore_dnld -r -v -d /etc/
Downloading code for hfa0
Mon960
Mon960 monitor for the Intel i960 CA (step 04)
Version 1.0 PCA-200E rev A (1.0), FORE Systems, Inc. Apr 1 1996
Copyright 1992, Intel Corporation
go 55d
In fact, I always get the following result:
pc-edison-10# atm show config
Intf Vendor Model Media Bus Serial No
hfa0 Fore PCA-200E OC-3c PCI 0
MAC address = 00:00:00:00:00:00
Hardware version =
Firmware version =
and when I execute
pc-edison-10# ifconfig atm0
atm0: flags=43<UP,BROADCAST,RUNNING> mtu 9180
inet 10.66.0.1 netmask 0xffffff00
ether 00:00:00:00:00:00
In the kernel configuration ( MYKERNEL),
I have the following configuration :
# ATM device
options NATM
options ATM_CORE #core ATM protocol family
options ATM_IP #IP over ATM support
options ATM_SIGPVC #SIGPVC signalling manager
options ATM_SPANS #SPANS signalling manager
options ATM_UNI #UNI signalling manager
device hfa0 # Forerunner PCA ATM 200e
pseudo-device atm
In the /etc/rc.conf, I added the following lines :
# ATM
atm_enable="YES"
atm_netif_hfa0="atm 1"
atm_sigmgr_hfa0="uni31"
atm_prefix_hfa0="ILMI"
atm_pvcs="lip6"
atm_pvc_lip6="hfa0 0 201 AAL5 LLC IP atm0 10.66.0.2"
# Network
defaultrouter="NO"
network_interfaces="de0 lo0 atm0"
ifconfig_de0="inet 220.43.2.10 netmask 255.255.255.0"
ifconfig_atm0="inet 10.66.0.1 netmask 255.255.255.0"
hostname="pc-edison-10.dispf"
gateway_enable="YES"
nfs_client_enable="YES"
I don't know what to do to fix the problem !
Perhaps, I forget to configure a file or I don't know something else.
So please can someone help me ?
thanks in advance
Nathalie
--------------------------------------------------------------------------
Nathalie REVAUX
AEROSPATIALE-MATRA Lanceurs
Service YY/IC
66, route de verneuil
78133 Les Mureaux Cedex
Tel : +33 1 39 06 73 35
Fax : +33 1 39 06 11 74
e-mail: Nathalie.Revaux@lanceurs.aeromatra.com
--------------------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-atm" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DC4B3D0E64D6D211B4690004AC4C3844035C1257>