Date: Fri, 1 Sep 2000 00:40:41 EDT From: Mike Muuss <mike@ARL.ARMY.MIL> To: freebsd-atm@freebsd.org Cc: Mike@ARL.ARMY.MIL, CJohnson@ARL.ARMY.MIL Subject: FreeBSD 4.1 failure w/Fore PCA-200E Message-ID: <200009010040.aa3011451@CAD.ARL.ARMY.MIL>
next in thread | raw e-mail | index | archive | help
In this past week I've installed two FreeBSD 4.1 systems, and have been
unable to get either one to work.
The first one was a brand new dual-CPU Dell server, with a new PCA-200E.
I didn't fret too much because I assumed that we'd gotten something
wrong in the configuration or BIOS settings.
The second one was my desktop machine. It had been running FreeBSD 4.0
with ATM very successfully. I used the "upgrade" option of the CD-ROM,
then built a new kernel with the exact same ATM kernel config lines
as I had used for 4.0, left /etc/rc.conf alone, and rebooted. This
system now fails to initialize the ATM in exactly the same way as
the dual-CPU Dell. This suggests that either (a) some important detail
of establishing the configuration has changed, or (b) something broke.
As best as I can tell, it appears that cells are not being received from
the PCA-200E, but that cells are successfully being transmitted. I can
see cells arriving at the PCA-200E on the blinking lights, and on the
Switch's statistics, but not inside FreeBSD.
I'm running the Fore PCA-200E interface via fiber into a Fore ASX-200BX
switch that has the new Pentium SCP processor in it.
Has anyone else succeeded in getting a similar configuration to work?
Any hints on what I might be doing wrong?
Thanks!
-Mike
Here is what I see:
Intf Vendor Model Media Bus Serial No
hfa0 Fore PCA-200E OC-3c PCI 4203797
MAC address = 00:20:48:40:25:15
Hardware version = 2.0.1
Firmware version = 3.0.1
Interface Sigmgr State
hfa0 UNI 3.1 ADR_WAIT <*** THIS IS TROUBLE
ATM address = -
Network interfaces: atm0
Net Intf Phy Intf IP Address
atm0 hfa0 vm.arl.army.mil (128.63.247.191)
Input Input Input Output Output Output Cmd
Interface PDUs Bytes Errs PDUs Bytes Errs Errs
hfa0 0 0 0 88 4236 0 0
Fore PCA-200E OC-3c Statistics
Section Path Line Line Path Corr Uncorr
BIP8 BIP8 BIP24 FEBE FEBE HCS HCS
Errs Errs Errs Errs Errs Errs Errs
0 0 0 0 0 0 0
Fore PCA-200E Device Statistics
Type 1 Type 1 Type 2 Type 2
Small Buff Large Buff Small Buff Large Buff Receive Receive
Alloc Fail Alloc Fail Alloc Fail Alloc Fail Queue Full Carrier
604 0 0 0 0 On
Fore PCA-200E ATM Layer Statistics
Cells In Cells Out VPI Range VPI NoConn VCI Range VCI NoConn
0 0 0 0 0 45100
Fore PCA-200E AAL 5 Statistics
CRC/Len CRC Proto PDU
Cells In Cells Out Errs Drops PDUs In PDUs Out Errs Errs Drops
0 176 604 0 0 88 0 0 0
Fore PCA-200E Device Driver Statistics
No Xmit Max Seg No No No IQ No Cmd No
VCC Queue Seg Not Seg DMA VCC No Mbuf Full DMA Queue DMA
Out Full Size Align Pad Out In Buff In In Sup Full Cmd
0 0 0 0 0 0 0 0 0 0 0 0 0
Interface VPI VCI AAL Type Dir State Encaps Owner
hfa0 0 16 AAL5 PVC InOut ACT_DOWN Null ILMI
Input Input Input Output Output Output
Interface VPI VCI PDUs Bytes Errs PDUs Bytes Errs
hfa0 0 16 0 0 0 88 4236 0
Net Intf State ATM Address
atm0 PEND_ADR 0x47.0005.80.007300.0000.0300.0100.0020481c095f.00
% netstat -nI atm0
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
atm0 9180 <Link#9> 00:20:48:40:25:15 0 0 89 0 0
atm0 9180 128.63.240/20 128.63.247.191 0 0 89 0 0
% dmesg
hfa0: <FORE Systems PCA-200E ATM> mem 0xd0a00000-0xd0bfffff irq 7 at device 14.0
on pci0
hfa0: driver is using old-style compatability shims
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-atm" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi? <200009010040.aa3011451>