From owner-freebsd-atm Thu Sep 21 2:22:39 2000 Delivered-To: freebsd-atm@freebsd.org Received: from widukind.bi.teuto.net (widukind.bi.teuto.net [212.8.197.28]) by hub.freebsd.org (Postfix) with ESMTP id EE98A37B423 for ; Thu, 21 Sep 2000 02:22:36 -0700 (PDT) Received: from windoze.andy.de (windoze.andy.de [212.8.199.4]) by widukind.bi.teuto.net (8.9.3/8.9.3) with ESMTP id LAA21815; Thu, 21 Sep 2000 11:22:27 +0200 Date: Thu, 21 Sep 2000 11:22:21 +0200 From: Andreas Gerstenberg To: freebsd-atm@freebsd.org Subject: which ATM Card for FreeBSD? Message-ID: <3167699800.969535341@windoze.andy.de> X-Mailer: Mulberry/2.0.4 (Win32) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-atm@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I'm looking for an ATM-card which ist supported by FreeBSD. I would like to use it for leased lines which will concentrated on the ATM-Interface. The Telco company told me the following requirements for this connection: - STM-1, Single Mode Fiber (quite expensive, I know) - They will use VPI 1, the VCI's will begins at 100 They also told me that another customer of them is using a Fore/Marconi PCA 200 under Linux. I talked with the administrator there, they had problemes with VPI 1 because of the Firmware of the card (which will be downloaded) only support VPI 0, so they had to use a switch to map VPI 1 to VPI 0. Are there the same limitations of the VPI usage while using the Fore PCA 100 with FreeBSD? I also would also like to account the traffic on each VPC. Mormally I'm using SNMP to get the values of 'interfaces.ifTable.ifEntry.if(In|Out)Octets'. Of course, this only works if each VPC have an own Interface which is exported by the snmp-daemon. Did every VPC have an own interface on the system? Thank you, Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-atm" in the body of the message