From owner-freebsd-isdn Sun Jun 4 8:17:23 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from mail.cicely.de (cicely.de [194.231.9.142]) by hub.freebsd.org (Postfix) with ESMTP id 72FED37BACF for ; Sun, 4 Jun 2000 08:17:17 -0700 (PDT) (envelope-from ticso@cicely8.cicely.de) Received: from cicely8.cicely.de (cicely8.cicely.de [10.1.2.10]) by mail.cicely.de (8.11.0.Beta1/8.11.0.Beta1) with ESMTP id e54FH0w16498 for ; Sun, 4 Jun 2000 17:17:01 +0200 (CEST) Received: (from ticso@localhost) by cicely8.cicely.de (8.9.3/8.9.2) id RAA93349 for freebsd-isdn@freebsd.org; Sun, 4 Jun 2000 17:13:25 +0200 (CEST) (envelope-from ticso) Date: Sun, 4 Jun 2000 17:13:25 +0200 From: Bernd Walter To: freebsd-isdn@freebsd.org Subject: isic0: HSCX VSTR test failed for AVM A1/Fritz Message-ID: <20000604171325.A93281@cicely8.cicely.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The card doesn't look similar to the usual A1 card and is labeled A1plus. Beside some PAL and TTL Logic there are the folowing chips: SAB82532 N-10 ESCC2 V2.2 PEB 2085 N ISAC-S V2.3 IOM-2 and one serial-EEPROM C46 Is there any chance to get this running? Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sun Jun 4 13:18:47 CEST 2000 ticso@cicely5.cicely.de:/var/d0/src-2000-05-28/src/sys/compile/CICELY4 Timecounter "i8254" frequency 1193182 Hz CPU: i386DX (386-class CPU) real memory = 8388608 (8192K bytes) avail memory = 5234688 (5112K bytes) Preloaded elf kernel "kernel" at 0xc032a000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc032a09c. npx0: on motherboard npx0: using IRQ 13 interface isa0: on motherboard fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 WARNING: "fd" is usurping "fd"'s cdevsw[] WARNING: "fd" is usurping "fd"'s bmaj aha0 at port 0x334-0x337 irq 11 drq 5 on isa0 aha0: AHA-1542CF FW Rev. E.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2 at port 0x3e8-0x3ef irq 12 on isa0 sio2: type 16550A sio3 at port 0x2e8-0x2ef irq 7 on isa0 sio3: type 16550A ed0 at port 0x300-0x31f iomem 0xcc000-0xcffff irq 10 on isa0 ed0: supplying EUI64: 00:00:c0:ff:fe:27:94:9f ed0: address 00:00:c0:27:94:9f, type WD8013WC (16 bit) isic0: HSCX VSTR test failed for AVM A1/Fritz isic0: HSC0: VSTR: 0 isic0: HSC1: VSTR: 0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default i4b: ISDN call control device attached i4bisppp: 16 ISDN SyncPPP device(s) attached i4bctl: ISDN system control port attached i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4btrc: 4 ISDN trace device(s) attached IPsec: Initialized Security Association Processing. Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at aha0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 5.000MB/s transfers (5.000MHz, offset 8) da0: 958MB (1962030 512 byte sectors: 64H 32S/T 958C) ed0: starting DAD for fe80:0001::0200:c0ff:fe27:949f ed0: DAD complete for fe80:0001::0200:c0ff:fe27:949f - no duplicates found ed0: starting DAD for fec0::0107:0200:c0ff:fe27:949f ed0: DAD complete for fec0::0107:0200:c0ff:fe27:949f - no duplicates found After removing the functionality behind some security checks I got the following: [...] isic0: Error, probe-1 failed, 0x30 should be 0x00 for AVM A1/Fritz! isic0: Error, probe-2 failed, 0x30 should be 0x10 for AVM A1/Fritz! isic0 at port 0x1b40-0x1b5f,0x1720-0x173f,0x720-0x73f,0xf20-0xf3f,0x1340-0x135f,0x340-0x35f,0xb40-0xb5f irq 5 flags 0x4 on isa0 isic0: AVM A1 or Fritz!Card Classic [...] i4b-L1-timer3_expired: state = F4 Awaiting Signal i4b-L1-isic_recover: HSCX B: ISTA = 0x4e i4b-L1-isic_recover: HSCX A: ISTA = 0x4e i4b-L1-isic_recover: HSCX A: EXIR = 0xff i4b-L1-isic_recover: ISAC: ISTA = 0x85 i4b-L1-isic_recover: ISAC: EXIR = 0x10 i4b-L1-isic_recover: ISAC: CISQ = 0x5e i4b-L1-isic_recover: HSCX B: IMASK = 0xff i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 i4b-L1-isic_recover: ISAC: IMASK = 0x2a i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 i4b-L1-ph_data_req: still in state F3! i4b-L3-T303_timeout: SETUP not answered, cr = 43 i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout! i4b-L1-timer3_expired: state = F4 Awaiting Signal i4b-L1-isic_recover: HSCX B: ISTA = 0x4e i4b-L1-isic_recover: HSCX A: ISTA = 0x4e i4b-L1-isic_recover: HSCX A: EXIR = 0xff i4b-L1-isic_recover: ISAC: ISTA = 0x0 i4b-L1-isic_recover: HSCX B: IMASK = 0xff i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 i4b-L1-isic_recover: ISAC: IMASK = 0x2a isp0: lcp close(starting) isp0: phase dead isdntrace is also very silent... -- B.Walter COSMO-Project http://www.cosmo-project.de ticso@cicely.de Usergroup info@cosmo-project.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Sun Jun 4 9:52:42 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id 59C8D37B806 for ; Sun, 4 Jun 2000 09:52:39 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (2010 bytes) by hcshh.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Sun, 4 Jun 2000 18:51:21 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Postfix, from userid 200) id 184FF3F4; Sun, 4 Jun 2000 18:51:52 +0200 (METDST) Subject: Re: isic0: HSCX VSTR test failed for AVM A1/Fritz In-Reply-To: <20000604171325.A93281@cicely8.cicely.de> from Bernd Walter at "Jun 4, 0 05:13:25 pm" To: ticso@cicely8.cicely.de (Bernd Walter) Date: Sun, 4 Jun 2000 18:51:51 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1129 Message-Id: <20000604165152.184FF3F4@hcswork.hcs.de> From: hm@hcs.de (Hellmuth Michaelis) Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From the keyboard of Bernd Walter: > The card doesn't look similar to the usual A1 card and is labeled A1plus. > Beside some PAL and TTL Logic there are the folowing chips: > SAB82532 N-10 ESCC2 V2.2 > PEB 2085 N ISAC-S V2.3 IOM-2 > and one serial-EEPROM C46 > > Is there any chance to get this running? With the current driver: no. No chance. The SAB82532 is not supported, i guess this is the B-channel chip, data sheets for it are available at http://www.infineon.com/products/commics/serocco_m.htm The ISAC handles the D-channel, this chip is supported (and is most of the work involved in writing a driver). I could not find any information on the A1plus at www.avm.de so i guess it is no longer manufactured and as such you are probably advised better to just buy a supported card ... ;-) hellmuth -- Hellmuth Michaelis Tel +49 40 55 97 47-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 55 97 47-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de D-22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Sun Jun 4 10:52:13 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from mail.cicely.de (cicely.de [194.231.9.142]) by hub.freebsd.org (Postfix) with ESMTP id 73ED037B625 for ; Sun, 4 Jun 2000 10:52:06 -0700 (PDT) (envelope-from ticso@cicely8.cicely.de) Received: from cicely8.cicely.de (cicely8.cicely.de [10.1.2.10]) by mail.cicely.de (8.11.0.Beta1/8.11.0.Beta1) with ESMTP id e54Hpjw17040; Sun, 4 Jun 2000 19:51:49 +0200 (CEST) Received: (from ticso@localhost) by cicely8.cicely.de (8.9.3/8.9.2) id TAA93605; Sun, 4 Jun 2000 19:51:45 +0200 (CEST) (envelope-from ticso) Date: Sun, 4 Jun 2000 19:51:44 +0200 From: Bernd Walter To: Hellmuth Michaelis Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: isic0: HSCX VSTR test failed for AVM A1/Fritz Message-ID: <20000604195144.A93512@cicely8.cicely.de> References: <20000604171325.A93281@cicely8.cicely.de> <20000604165152.184FF3F4@hcswork.hcs.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000604165152.184FF3F4@hcswork.hcs.de>; from hm@hcs.de on Sun, Jun 04, 2000 at 06:51:51PM +0200 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Jun 04, 2000 at 06:51:51PM +0200, Hellmuth Michaelis wrote: > >From the keyboard of Bernd Walter: > > > The card doesn't look similar to the usual A1 card and is labeled A1plus. > > Beside some PAL and TTL Logic there are the folowing chips: > > SAB82532 N-10 ESCC2 V2.2 > > PEB 2085 N ISAC-S V2.3 IOM-2 > > and one serial-EEPROM C46 > > > > Is there any chance to get this running? > > With the current driver: no. No chance. > > The SAB82532 is not supported, i guess this is the B-channel chip, data sheets > for it are available at http://www.infineon.com/products/commics/serocco_m.htm Thanks for the link and the quick answer. There is also a Page specially for the SAB82532 that shows it as an upgraded 82525. The page you gave was for a PEB20535 which is maybe the same - at least the feature-list looks similar. It seem you are right in asuming that this is the B-Channel Chip. > > The ISAC handles the D-channel, this chip is supported (and is most of > the work involved in writing a driver). > > I could not find any information on the A1plus at www.avm.de so i guess > it is no longer manufactured and as such you are probably advised better > to just buy a supported card ... ;-) Nearly all chips are dated for 1993 or earlier so I asume the card was manufactured in 1993 or 94. -- B.Walter COSMO-Project http://www.cosmo-project.de ticso@cicely.de Usergroup info@cosmo-project.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Mon Jun 5 14:48:34 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from nets5.rz.rwth-aachen.de (nets5.rz.RWTH-Aachen.DE [137.226.144.13]) by hub.freebsd.org (Postfix) with ESMTP id 42BE337B58E for ; Mon, 5 Jun 2000 14:48:32 -0700 (PDT) (envelope-from Gerald.Heinig@post.rwth-aachen.de) Received: from post.rwth-aachen.de (s4m250.dialup.RWTH-Aachen.DE [137.226.8.250]) by nets5.rz.rwth-aachen.de (8.10.1/8.10.1/5) with ESMTP id e55LmTb18374 for ; Mon, 5 Jun 2000 23:48:29 +0200 (MET DST) Message-ID: <393C1FDA.D391B622@post.rwth-aachen.de> Date: Mon, 05 Jun 2000 23:47:06 +0200 From: Gerald Heinig X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isdn@freebsd.org Subject: TA PCI passive card questions Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I recently (yesterday) acquired a TA ISDN card and I'd like to know whether anyone has any info on this beast. It has the Cologne Chip Designs chip on it - the exact number is CCD 9914E. I had a look through the i4b archives and it seems someone (Hellmuth?) is writing a driver for this thing, or wants to, or has finished and wants to test or whatever. If the driver work is still ongoing, Iīd like to offer to help. I have a bit of time spare at the moment and if I could contribute something and learn a thing or two that would be cool. First of all, though, I donīt have any docs for this chip and I donīt even know what company the card is from. All it says on the box is "ISDN 128k TA card" and the exact card number is TAS106H-C if thatīs of any help to anyone. As for the chip, I had a look for www.ccd.de, ccd.com, searched for "Cologne Chip Design" on Yahoo but turned up nothing. Where do I get the doco for this thing from? Any pointers much appreciated. If there already *is* a driver for this then sorry to waste your time. Iīm still on 3.4 Release with (IIRC) the stock i4b and there was no mention of this card in the "Cards" file. If itīs already in the 4.0 i4b Iīll have missed it. Cheers, Gerald To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Tue Jun 6 5:14:48 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id 7E30237B57D for ; Tue, 6 Jun 2000 05:14:43 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (2203 bytes) by hcshh.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Tue, 6 Jun 2000 14:13:28 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Postfix, from userid 200) id 6084439A9; Tue, 6 Jun 2000 14:13:58 +0200 (METDST) Subject: Re: TA PCI passive card questions In-Reply-To: <393C1FDA.D391B622@post.rwth-aachen.de> from Gerald Heinig at "Jun 5, 0 11:47:06 pm" To: Gerald.Heinig@post.rwth-aachen.de (Gerald Heinig) Date: Tue, 6 Jun 2000 14:13:58 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 1316 Message-Id: <20000606121358.6084439A9@hcswork.hcs.de> From: hm@hcs.de (Hellmuth Michaelis) Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From the keyboard of Gerald Heinig: > I recently (yesterday) acquired a TA ISDN card and I'd like to know > whether anyone has any info on this beast. > It has the Cologne Chip Designs chip on it - the exact number is CCD > 9914E. There is work going on to support CCD chipsets. The older chips for the ISA bus (such as the ones used in the Teles 16.3c) will be supported in the next release. I'm not shure about the current PCI chipset: some code has been written but there is still a _lot_ to do, i have no idea if there will be at least an experimental driver in the next release - although i really really like to have it. > If the driver work is still ongoing, I_d like to offer to help. I have a > bit of time spare at the moment and if I could contribute something and > learn a thing or two that would be cool. > First of all, though, I don_t have any docs for this chip and I don_t > even know what company the card is from. All CCD datasheets are online at www.colognechip.de hellmuth -- Hellmuth Michaelis Tel +49 40 55 97 47-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 55 97 47-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de D-22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Wed Jun 7 2:21: 9 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from vestein.arb-phys.uni-dortmund.de (dhcp197.ifado.de [195.253.22.197]) by hub.freebsd.org (Postfix) with ESMTP id B6DD837B5BB for ; Wed, 7 Jun 2000 02:21:05 -0700 (PDT) (envelope-from wb@vestein.arb-phys.uni-dortmund.de) Received: from yorikke.arb-phys.uni-dortmund.de (yorikke [192.109.44.12]) by vestein.arb-phys.uni-dortmund.de (8.9.2/8.9.3) with ESMTP id LAA67582 for ; Wed, 7 Jun 2000 11:21:19 +0200 (MET DST) (envelope-from wb@vestein.arb-phys.uni-dortmund.de) Received: (from wb@localhost) by yorikke.arb-phys.uni-dortmund.de (8.9.3/8.9.3) id LAA00451 for freebsd-isdn@freebsd.org; Wed, 7 Jun 2000 11:21:37 +0200 (MET DST) (envelope-from wb) Date: Wed, 7 Jun 2000 11:21:37 +0200 (MET DST) From: "Wilhelm B. Kloke" Message-Id: <200006070921.LAA00451@yorikke.arb-phys.uni-dortmund.de> To: freebsd-isdn@freebsd.org Subject: Creatix PnP on 4.0-RELEASE Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org When I updated to 4.0, I tried to change from configuring my card via kernel.config to PnP. The resulting kernel crashes after saying: ... could not get io area 3 for Creatix/Teles PnP ... Should I go back to handle the card as not pnp? BTW. In the upgrade process I noticed that my old kernel crashes, when the ISDN line is plugged off. I am not sure whether I should report this error, because I hope it is obsolete anyhow. But I try this, when I made a new kernel with fixed IRQ. wbk -- Dipl.-Math. Wilhelm Bernhard Kloke Institut fuer Arbeitsphysiologie an der Universitaet Dortmund Ardeystrasse 67, D-44139 Dortmund, Tel. 0231-1084-257 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Wed Jun 7 9:29:51 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from ns1.eds.ch (ns1.eds.ch [194.235.48.8]) by hub.freebsd.org (Postfix) with ESMTP id 078E737BD7A for ; Wed, 7 Jun 2000 09:29:44 -0700 (PDT) (envelope-from roberto.Nunnari@agie.ch) Received: from onyx.eds.ch (onyx.eds.ch [206.122.128.224]) by ns1.eds.ch (8.9.3/8.9.3) with ESMTP id SAA21231 for ; Wed, 7 Jun 2000 18:37:43 +0200 (MET DST) Received: from mailsrv.eds.ch (mailsrv.eds.ch [206.122.128.226]) by onyx.eds.ch (8.9.3/8.9.3) with ESMTP id SAA24116 for ; Wed, 7 Jun 2000 18:33:41 +0200 (MET DST) Received: from agie.ch ([198.132.159.194]) by mailsrv.eds.ch (Netscape Messaging Server 3.6) with ESMTP id AAA228C for ; Wed, 7 Jun 2000 18:25:49 +0200 Message-ID: <393E85EE.401008BF@agie.ch> Date: Wed, 07 Jun 2000 18:27:10 +0100 From: "Roberto Nunnari, AGIE" Organization: AGIE X-Mailer: Mozilla 4.7 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isdn@FreeBSD.ORG Subject: html documentation Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi there. I find the doc "The Care and Feeding of isdn4bsd" is a great resource. Unfortunately the HTML version is only available for consulting online. Would it be possible to put online a i4b.tar.gz for download (as for the ps version)? Best regards. -- Roberto Nunnari -software engineer- mailto:roberto.nunnari@agie.ch AGIE - http://www.agie.com Via dei pioppi 16 tel: +41-91-8069138 6616 Losone """ Switzerland (o o) =======================oOO==(_)==OOo======================== MY OPNIONS ARE NOT NECESSARELY THOSE OF MY EMPLOYER To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 8 5:47:52 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from fusion.fwx.co.za (fusion.fwx.co.za [196.15.146.253]) by hub.freebsd.org (Postfix) with ESMTP id 34AA937B8FC for ; Thu, 8 Jun 2000 05:47:46 -0700 (PDT) (envelope-from george@fwx.co.za) Received: from fwx (george@pc [192.168.1.1]) by fusion.fwx.co.za (8.9.2/8.9.2) with SMTP id PAA10485 for ; Thu, 8 Jun 2000 15:15:22 +0200 (SAST) (envelope-from george@fwx.co.za) Message-ID: <014401bfd147$93940da0$0101a8c0@co.za.fwx.co.za> From: "George Barnett" To: Subject: ISDN internet for a lan Date: Thu, 8 Jun 2000 14:46:31 +0200 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I have the following situatution: -I have 40 users on lan - 20 are on 192.168.1.* and 20 are on 192.168.0.* -I have 1 FreeBSD 3.4 machine with 2 ISDN boards and 2 network cards (one set to 192.168.1.1 and the other to 192.168.0.1) -My ISP does not support multi-channel and none in the area do I wish to provide net access to the lan (basic services only (through appropriate proxies on the bsd machine)) - how do I get the one isdn modem to dialup when 192.168.1.* requests something external, or the other one to dialup if 192.168.0.* requests something external while still having both go through the squid proxy server or whatever. I assume that natd won't need to be running and the ppp dial-up will be set to auto? Any help would be appreciated - replies in private please :-) Thanks George Barnett -=-=-=-=-=-=-=-=-=-=-=-=- Cell: +27 83 651 7890 Work: +27 43 727 0344 Fax: +27 43 727 0341 george@fwx.co.za jungleg@fwx.co.za -=-=-=-=-=-=-=-=-=-=-=-=- Numbers Dance Club http://www.numbers.co.za -=-=-=-=-=-=-=-=-=-=-=-=- FusionWorx Advertising http://www.fwx.co.za/ -=-=-=-=-=-=-=-=-=-=-=-=- If you can't run with the big dogs, stay on the porch... -=-=-=-=-=-=-=-=-=-=-=-=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 8 11: 5:47 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1]) by hub.freebsd.org (Postfix) with SMTP id BC07137B608 for ; Thu, 8 Jun 2000 11:05:40 -0700 (PDT) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (1780 bytes) by hcshh.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Thu, 8 Jun 2000 20:05:36 +0200 (CEST) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Postfix, from userid 200) id BB72D1610; Thu, 8 Jun 2000 20:05:35 +0200 (METDST) Subject: Re: Creatix PnP on 4.0-RELEASE In-Reply-To: <200006070921.LAA00451@yorikke.arb-phys.uni-dortmund.de> from "Wilhelm B. Kloke" at "Jun 7, 0 11:21:37 am" To: wb@vestein.arb-phys.uni-dortmund.de (Wilhelm B. Kloke) Date: Thu, 8 Jun 2000 20:05:35 +0200 (METDST) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 867 Message-Id: <20000608180535.BB72D1610@hcswork.hcs.de> From: hm@hcs.de (Hellmuth Michaelis) Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From the keyboard of Wilhelm B. Kloke: > When I updated to 4.0, I tried to change from configuring my card > via kernel.config to PnP. The resulting kernel crashes after > saying: > ... could not get io area 3 for Creatix/Teles PnP ... I think this is either a bug or a real hardware overlap. I have both cards here and never saw this, so it might be just occuring on your particular configuration. > BTW. In the upgrade process I noticed that my old kernel crashes, when > the ISDN line is plugged off. Strange. I cannot reproduce this. hellmuth -- Hellmuth Michaelis Tel +49 40 55 97 47-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 55 97 47-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de D-22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 8 13:46:34 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from brs.com.br (brs.com.br [192.41.24.32]) by hub.freebsd.org (Postfix) with ESMTP id 81CCC37C205 for ; Thu, 8 Jun 2000 13:46:19 -0700 (PDT) (envelope-from email@carlos.eti.br) Received: from fraga.carlos.eti.br ([200.241.0.6]) by brs.com.br (8.8.5) id SAA13006; Thu, 8 Jun 2000 18:46:19 -0200 (GMT+2) X-Authentication-Warning: brs.com.br: Host [200.241.0.6] claimed to be fraga.carlos.eti.br Message-Id: <4.3.2.7.2.20000608174756.00b1f340@carlos.eti.br> X-Sender: email@carlos.eti.br X-Mailer: QUALCOMM Windows Eudora Version 4.3.2 Date: Thu, 08 Jun 2000 17:48:00 -0300 To: freebsd-isdn@FreeBSD.ORG From: Carlos Fraga Subject: Re: It's worth ! Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org A site that pays you to receive some e-mails. No more than that. Nothing to buy, just to receive the e-mail and click on the link to visit the site. Don't you believe it exists ? Yes, it exists. And I have already received a US$ 50,00 check. Will you say that you don't want some money ? It's up to you to subscribe and start receiving e-mails and money ! Follow the link: http://www.sendmoreinfo.com/id/871883 See you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message From owner-freebsd-isdn Thu Jun 8 14:30:20 2000 Delivered-To: freebsd-isdn@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id BB33337BCE0 for ; Thu, 8 Jun 2000 14:30:16 -0700 (PDT) (envelope-from bitbucket@adenzel.demon.nl) Received: from [212.238.95.18] (helo=adenzel.demon.nl) by post.mail.nl.demon.net with esmtp (Exim 3.14 #2) id 1309sV-0002HX-00 for freebsd-isdn@FreeBSD.ORG; Thu, 08 Jun 2000 21:30:15 +0000 Message-ID: <394012CD.3664AE6C@adenzel.demon.nl> Date: Thu, 08 Jun 2000 21:40:29 +0000 From: Alex van Denzel X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.0.32 i586) X-Accept-Language: en MIME-Version: 1.0 To: ISDN4BSD Mailing list Subject: Activity Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am not sure that I am registered on this mailing list. I should be as "alx@adenzel.demon.nl", I tried, but I haven't received anything yet. -- Alex Replace bitbucket with anything else. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message