From owner-freebsd-isp Sun May 7 7:42:11 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail2.mco.bellsouth.net (mail2.mco.bellsouth.net [205.152.111.14]) by hub.freebsd.org (Postfix) with ESMTP id 2E22237BE29 for ; Sun, 7 May 2000 07:41:59 -0700 (PDT) (envelope-from bryanb@walls-media.com) Received: from bryannthome (adsl-77-252-68.bhm.bellsouth.net [216.77.252.68]) by mail2.mco.bellsouth.net (3.3.5alt/0.75.2) with SMTP id KAA14060 for ; Sun, 7 May 2000 10:38:37 -0400 (EDT) Message-ID: <001301bfb832$65823190$44fc4dd8@bhm.bellsouth.net> From: "Bryan Bunch" To: References: Subject: Re: MRTG / Cisco 3810 Date: Sun, 7 May 2000 09:41:57 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Cricket can be found at: http://www.munitions.com/~jra/cricket/ Bryan ----- Original Message ----- From: "Diana Eichert" To: Sent: Saturday, May 06, 2000 10:02 AM Subject: Re: MRTG / Cisco 3810 > Take a look at Cricket, with RRDTOOL as the backend. It will do an IfName > or IfDescr walk to matchup interfaces/ports to the correct ifIndex if so > configured. Besides RRDTOOL is the new improved replacement for the MRTG > backend database. > > Search for cricket at www.sourceforge.net > > diana > > On Sat, 6 May 2000, Andrzej Bialecki wrote: > > > On Fri, 5 May 2000, Ulf Zimmermann wrote: > > > > > On Sat, May 06, 2000 at 07:18:11PM -0700, Paul D Kruse wrote: > > > > We have recently upgraded the IOS on our Cisco 3810 from 11.3 to 12.0. This > > > > router handles our DSL connections. The reason we upgraded the IOS was > > > > because we wanted to provide PPP access to our customers, in addition to the > > > > Bridged access we already had. Well in the process, MRTG, which runs on one > > > > of our Free BSD boxes, quit working for the subinterfaces on this router. > > > > The upgrade of the IOS converted the Serial2.32 interface to ATM0.32. > > > > Originally, we were monitoring / graphing down to the PVC level. > > > > > > Each time you reboot a Cisco, there is the possibility that the index > > > numbers for SNMP change. Example: > > > > > You now run cfgmaker and configure your mrtg and everything is fine. > > > > > > Now you add Serial1/0.5 (another subinterface), it will probably become > > > index 11. But what happens when you reboot now ? The IOS will number > > > the interfaces again. Serial1/0.5 will become Index 6, Serial 2/0 becomes > > > 7, Serial 2/0.1 becomes 8, etc. > > > > You can patch mrtg to use interface descriptions instead (that is, if you > > set them before to some unique values). They are available as part of the > > enterprise MIB. > > > > Andrzej Bialecki > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun May 7 11: 4:44 2000 Delivered-To: freebsd-isp@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 608) id 7B71337BB58; Sun, 7 May 2000 11:04:39 -0700 (PDT) From: "Jonathan M. Bresler" To: jackson@msrce.howard.edu Cc: gary@tbe.net, spork@super-g.com, matt@ARPA.MAIL.NET, freebsd-isp@FreeBSD.ORG In-reply-to: <200005051532.KAA13871@MushMouth.AaronJackson.com> (message from Aaron Jackson on Fri, 5 May 2000 10:32:55 -0500 (EST)) Subject: Re: freebsd hosting. Message-Id: <20000507180439.7B71337BB58@hub.freebsd.org> Date: Sun, 7 May 2000 11:04:39 -0700 (PDT) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am also in the Washington DC area. I have been using ADSL from BellAtlantic for several months now. the only problem, is ocassional outages, these can last a day. FreeBSD pppoe works wonderfully (see http://people.freebsd.org/~jmb). jmb > > I live in the Washington, DC area and I had Bell > Atlantic ADSL service and I hated it. It was not stable > and the pppoe implementation irritated the hell out of > me, some of my apps weren't compatible with the MACpoet > driver and development on a pppoe driver for OpenBSD > (my firewall OS of choice) is a little behind. Bell > Atlantic used to have static ips, which was nice, but > they got rid of that a few months ago. I ordered DSL > service from Covad (capu.net ISP) in March 2000, and by > March 30, 2000 it was installed. During the > three week I was waiting for the DSL to be > installed, capu.net continuously updated me on my order > status, to the point where it became annoying. There > were a few installation problems, but my ISP credited an > extra month to my account, so I was satisfied how things > were handled. I wouldn't suggest anybody use Bell > Atlantic ADSL unless they had to, while I have been > satisfied by the service COVAD/capu.net have provided > me. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun May 7 11:54:34 2000 Delivered-To: freebsd-isp@freebsd.org Received: from dt051n0b.san.rr.com (dt051n0b.san.rr.com [204.210.32.11]) by hub.freebsd.org (Postfix) with ESMTP id 3689737BA8A for ; Sun, 7 May 2000 11:54:30 -0700 (PDT) (envelope-from DougB@gorean.org) Received: from gorean.org (doug@master [10.0.0.2]) by dt051n0b.san.rr.com (8.9.3/8.9.3) with ESMTP id LAA58047; Sun, 7 May 2000 11:54:27 -0700 (PDT) (envelope-from DougB@gorean.org) Message-ID: <3915BBE3.1E68950E@gorean.org> Date: Sun, 07 May 2000 11:54:27 -0700 From: Doug Barton Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.72 [en] (X11; U; FreeBSD 5.0-CURRENT-0422 i386) X-Accept-Language: en MIME-Version: 1.0 To: Bryan Bunch Cc: freebsd-isp@freebsd.org Subject: Re: MRTG / Cisco 3810 References: <001301bfb832$65823190$44fc4dd8@bhm.bellsouth.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Bryan Bunch wrote: > > Cricket can be found at: > > http://www.munitions.com/~jra/cricket/ What are the advantages to cricket over mrtg? -- "Live free or die" - State motto of my ancestral homeland, New Hampshire Do YOU Yahoo!? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun May 7 19:22: 6 2000 Delivered-To: freebsd-isp@freebsd.org Received: from web125.yahoomail.com (web125.yahoomail.com [205.180.60.193]) by hub.freebsd.org (Postfix) with SMTP id 7DACD37BB4B for ; Sun, 7 May 2000 19:21:39 -0700 (PDT) (envelope-from fmirand@yahoo.com) Received: (qmail 21790 invoked by uid 60001); 8 May 2000 02:21:34 -0000 Message-ID: <20000508022134.21789.qmail@web125.yahoomail.com> Received: from [200.30.54.81] by web125.yahoomail.com; Sun, 07 May 2000 19:21:34 PDT Date: Sun, 7 May 2000 19:21:34 -0700 (PDT) From: Fabio Miranda Subject: Request of help! To: freebsd-questions@FreeBSD.org Cc: FreeBSD-net@freebsd.org, FreeBSD@es.FreeBSD.org, FreeBSD-isp@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, i've been trying to set up my network and it has been imposible. I have sent many emails and noone has pointed me in the right way. Please, can anyone help me? Problem: I'm connecting a network to a leased line from my local company. I have a sever that uses a isa card(et5025-16 etinc.com) to connect to a dce (dsu/csu) and from it to the isp. The isp router is 209.88.252.105 and my IP is 209.88.252.106(the point to point link), and we belongs to 209.88.252.114 subnet. Also, the ISP gave me a subnet: 209.88.252.104/29 and i want the same server to have 209.88.252.113 and 209.88.252.114 to 118 are my local machines. the diagrama: ISProuter (209.88.252.105) - - - - eth0(209.88.252.106) FreeBSD fxp0(209.88.252.113)----->209.88.252.114to118 machines. I want the freebsd machine to route from 209.88.252.106 interface to 209.88.252.114 and viceversa, a multihomed server. Friends, i have really tried many things and the answered of my pasts email are kinda confused. Can anyone tell me something clear? i want to belongs to FreeBSD comunity! but, docs and all are hard. this is what i have done: ifconfig eth0 209.88.252.106 209.88.252.106 netmask 255.255.255.248 ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 route add -net 209.88.252.104/29 209.88.252.105 -interface 209.88.252.106 route add -net 209.88.252.112/29 209.88.252.113 -interface 209.88.252.113 route add -net 0.0.0.0 209.88.252.113 1. What else do i need to make freebsd a router between the subnet .104 and .112 and make it use the .113? (pls, write the commands) 2. Do i need another software? like gated or routed or natd? 3. if i dont need any software, what makes "route" a packages from any of my local machines to the internet passing by the gatedway (the server)?. Thanks alot for any type of help. p.s. servers it's a l440gx intel using 3.4-release, others machines are win98 __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun May 7 19:55:14 2000 Delivered-To: freebsd-isp@freebsd.org Received: from smtp-out2.bellatlantic.net (smtp-out2.bellatlantic.net [199.45.39.157]) by hub.freebsd.org (Postfix) with ESMTP id 8E9DA37BC04 for ; Sun, 7 May 2000 19:55:10 -0700 (PDT) (envelope-from jan@smartsoft.cc) Received: from smartsoft.cc (client-209-158-91-193.bellatlantic.net [209.158.91.193]) by smtp-out2.bellatlantic.net (8.9.1/8.9.1) with ESMTP id WAA14540; Sun, 7 May 2000 22:45:18 -0400 (EDT) Message-ID: <391629E9.63B21D24@smartsoft.cc> Date: Sun, 07 May 2000 22:43:53 -0400 From: Jan Knepper Organization: Smartsoft, LLC X-Mailer: Mozilla 4.72 [en] (Windows NT 5.0; I) X-Accept-Language: en MIME-Version: 1.0 To: Fabio Miranda , FreeBSD-ISP@FreeBSD.org Subject: Re: Request of help! References: <20000508022134.21789.qmail@web125.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org OK, just my 2 cents... How far can you 'ping'. I mean, can you ping ISProuter (209.88.252.105) from FreeBSD via 209.88.252.106? As far as using 209.88.252.113, 114 - 118 goes... Are these IP's assigned to you? If not, I would suggest you change to 192.168.x.x since those are meant to be used for a local network as far as I know. Using anything in 209.88.252.x probably completely confuses the system. Next, can you ping the fxp0 IP from FreeBSD from any other stations on the local network? What about the eth0 IP from any other station on the local network? Finally can you ping the ISProuter (209.88.252.105) from any station on the local network? Well, I suppose this is a start... Let me know... Don't worry, be Kneppie! Jan Fabio Miranda wrote: > Hi, i've been trying to set up my network and it has > been imposible. I have sent many emails and noone has > pointed me in the right way. Please, can anyone help > me? > Problem: > I'm connecting a network to a leased line from my > local company. I have a sever that uses a isa > card(et5025-16 etinc.com) to connect to a dce > (dsu/csu) and from it to the isp. > The isp router is 209.88.252.105 and my IP is > 209.88.252.106(the point to point link), and we > belongs to 209.88.252.114 subnet. > Also, the ISP gave me a subnet: 209.88.252.104/29 and > i want the same server to have 209.88.252.113 and > 209.88.252.114 to 118 are my local machines. > the diagrama: > ISProuter > (209.88.252.105) > - > - > - > - > eth0(209.88.252.106) > FreeBSD > fxp0(209.88.252.113)----->209.88.252.114to118 > machines. > > I want the freebsd machine to route from > 209.88.252.106 interface to 209.88.252.114 and > viceversa, a multihomed server. > > Friends, i have really tried many things and the > answered of my pasts email are kinda confused. > Can anyone tell me something clear? i want to belongs > to FreeBSD comunity! but, docs and all are hard. > > this is what i have done: > > ifconfig eth0 209.88.252.106 209.88.252.106 netmask > 255.255.255.248 > ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 > route add -net 209.88.252.104/29 209.88.252.105 > -interface 209.88.252.106 > route add -net 209.88.252.112/29 209.88.252.113 > -interface 209.88.252.113 > route add -net 0.0.0.0 209.88.252.113 > > 1. What else do i need to make freebsd a router > between the subnet .104 and .112 and make it use the > .113? (pls, write the commands) > 2. Do i need another software? like gated or routed or > natd? > 3. if i dont need any software, what makes "route" a > packages from any of my local machines to the internet > passing by the gatedway (the server)?. > > Thanks alot for any type of help. > > p.s. servers it's a l440gx intel using 3.4-release, > others machines are win98 > > __________________________________________________ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- =============================================================== Jan Knepper Smartsoft, LLC 88 Petersburg Road Petersburg, NJ 08270 U.S.A. Phone: 609-628-4260 FAX : 609-628-1267 http://www.smartsoft.cc/ --------------------------------------------------------------- http://www.pianoprincess.com/ http://www.mp3.com/pianoprincess http://www.riffage.com/Bands/0,2939,2859,00.html http://pianoprincess.iuma.com/ http://www.changemusic.com/piano_princess =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun May 7 20:52:27 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hydrant.intranova.net (hydrant.intranova.net [209.201.95.10]) by hub.freebsd.org (Postfix) with ESMTP id 0B5A937BD73 for ; Sun, 7 May 2000 20:52:17 -0700 (PDT) (envelope-from oogali@intranova.net) Received: from localhost (localhost [127.0.0.1]) by hydrant.intranova.net (Postfix) with ESMTP id F29A4E0C9A; Sun, 7 May 2000 23:52:34 -0400 (EDT) Date: Sun, 7 May 2000 23:52:34 -0400 (EDT) From: Omachonu Ogali To: Bryan Bunch Cc: freebsd-isp@freebsd.org Subject: Re: MRTG / Cisco 3810 In-Reply-To: <001301bfb832$65823190$44fc4dd8@bhm.bellsouth.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You can use 'cfgmaker' which comes with MRTG to walk the interfaces again and output into a configuration file into which you can cut and paste the appropriate interfaces into your current mrtg.cfg. On Sun, 7 May 2000, Bryan Bunch wrote: > Cricket can be found at: > > http://www.munitions.com/~jra/cricket/ > > > Bryan > > ----- Original Message ----- > From: "Diana Eichert" > To: > Sent: Saturday, May 06, 2000 10:02 AM > Subject: Re: MRTG / Cisco 3810 > > > > Take a look at Cricket, with RRDTOOL as the backend. It will do an IfName > > or IfDescr walk to matchup interfaces/ports to the correct ifIndex if so > > configured. Besides RRDTOOL is the new improved replacement for the MRTG > > backend database. > > > > Search for cricket at www.sourceforge.net > > > > diana > > > > On Sat, 6 May 2000, Andrzej Bialecki wrote: > > > > > On Fri, 5 May 2000, Ulf Zimmermann wrote: > > > > > > > On Sat, May 06, 2000 at 07:18:11PM -0700, Paul D Kruse wrote: > > > > > We have recently upgraded the IOS on our Cisco 3810 from 11.3 to > 12.0. This > > > > > router handles our DSL connections. The reason we upgraded the IOS > was > > > > > because we wanted to provide PPP access to our customers, in > addition to the > > > > > Bridged access we already had. Well in the process, MRTG, which > runs on one > > > > > of our Free BSD boxes, quit working for the subinterfaces on this > router. > > > > > The upgrade of the IOS converted the Serial2.32 interface to > ATM0.32. > > > > > Originally, we were monitoring / graphing down to the PVC level. > > > > > > > > Each time you reboot a Cisco, there is the possibility that the index > > > > numbers for SNMP change. Example: > > > > > > > You now run cfgmaker and configure your mrtg and everything is fine. > > > > > > > > Now you add Serial1/0.5 (another subinterface), it will probably > become > > > > index 11. But what happens when you reboot now ? The IOS will number > > > > the interfaces again. Serial1/0.5 will become Index 6, Serial 2/0 > becomes > > > > 7, Serial 2/0.1 becomes 8, etc. > > > > > > You can patch mrtg to use interface descriptions instead (that is, if > you > > > set them before to some unique values). They are available as part of > the > > > enterprise MIB. > > > > > > Andrzej Bialecki > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-isp" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > > -- +-------------------------------------------------------------------------+ | Omachonu Ogali oogali@intranova.net | | Intranova Networking Group http://tribune.intranova.net | | PGP Key ID: 0xBFE60839 | | PGP Fingerprint: C8 51 14 FD 2A 87 53 D1 E3 AA 12 12 01 93 BD 34 | +-------------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 1: 9:39 2000 Delivered-To: freebsd-isp@freebsd.org Received: from bluerose.windmoon.nu (c255152-a.plstn1.sfba.home.com [24.15.210.246]) by hub.freebsd.org (Postfix) with ESMTP id B716D37B5F0 for ; Mon, 8 May 2000 01:09:29 -0700 (PDT) (envelope-from fengyue@bluerose.windmoon.nu) Received: from localhost (fengyue@localhost) by bluerose.windmoon.nu (Windmoon-Patched/8.9.3/8.9.3) with ESMTP id BAA00516 for ; Mon, 8 May 2000 01:33:21 -0700 (PDT) Date: Mon, 8 May 2000 01:33:21 -0700 (PDT) From: FengYue To: FreeBSD-isp@FreeBSD.ORG Subject: mysql 3.22.32 and freebsd 4.0-stable In-Reply-To: <20000508022134.21789.qmail@web125.yahoomail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, anyone of you running mysql 3.22.32 on 4.0-stable? I'm getting a core dump on startup. I tried with the ports as well as the package from www.mysql.org. Here it's the backtrace, I've not got a chance to look into the source. I'm wondering if any of you have seen this before? (gdb) bt #0 0x806cbd7 in lex_init () #1 0x8069e65 in main () #2 0x804aaad in _start () Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 5: 6:53 2000 Delivered-To: freebsd-isp@freebsd.org Received: from lily.ezo.net (lily.ezo.net [206.102.130.13]) by hub.freebsd.org (Postfix) with ESMTP id E4F6237B6B1 for ; Mon, 8 May 2000 05:06:49 -0700 (PDT) (envelope-from jflowers@ezo.net) Received: from lily.ezo.net (jflowers@localhost.ezo.net [127.0.0.1]) by lily.ezo.net (8.8.7/8.8.7) with SMTP id IAA08614; Mon, 8 May 2000 08:06:38 -0400 (EDT) Date: Mon, 8 May 2000 08:06:37 -0400 (EDT) From: Jim Flowers To: FengYue Cc: FreeBSD-isp@FreeBSD.ORG Subject: Re: mysql 3.22.32 and freebsd 4.0-stable In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Yes, on STABLE #0 May 5, 2000. Installed 3.22.32 from cvsupped port same date. Jim Flowers #4 ISP on C|NET, #1 in Ohio On Mon, 8 May 2000, FengYue wrote: > > Hello, anyone of you running mysql 3.22.32 on 4.0-stable? > I'm getting a core dump on startup. I tried with the ports as well > as the package from www.mysql.org. > > Here it's the backtrace, I've not got a chance to look into the source. > I'm wondering if any of you have seen this before? > > (gdb) bt > #0 0x806cbd7 in lex_init () > #1 0x8069e65 in main () > #2 0x804aaad in _start () > > Thanks! > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 5:44: 7 2000 Delivered-To: freebsd-isp@freebsd.org Received: from apollo.ocsny.com (apollo.ocsny.com [204.107.76.2]) by hub.freebsd.org (Postfix) with ESMTP id CEEBE37B51F; Mon, 8 May 2000 05:43:45 -0700 (PDT) (envelope-from mikel@ocsny.com) Received: from ocsny.com (thoth.upan.org [204.107.76.16]) by apollo.ocsny.com (8.9.2/8.9.3) with ESMTP id IAA68276; Mon, 8 May 2000 08:41:22 -0400 (EDT) Message-ID: <3916B6A4.7F5A3728@ocsny.com> Date: Mon, 08 May 2000 08:44:20 -0400 From: Mikel Organization: Optimized Computer Solutions, Inc. X-Mailer: Mozilla 4.73 [en] (Win98; U) X-Accept-Language: en,it MIME-Version: 1.0 To: Fabio Miranda Cc: freebsd-questions@FreeBSD.ORG, FreeBSD-net@FreeBSD.ORG, FreeBSD-isp@FreeBSD.ORG Subject: Re: Request of help! References: <20000508022134.21789.qmail@web125.yahoomail.com> Content-Type: multipart/mixed; boundary="------------1DAE3D92FF4B71017F0BB8F6" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------1DAE3D92FF4B71017F0BB8F6 Content-Type: multipart/alternative; boundary="------------84C0ABF8769A475D786EFF59" --------------84C0ABF8769A475D786EFF59 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Have you tried a more simplistic approach to your route statements? from below you gave us... ifconfig eth0 209.88.252.106 209.88.252.106 netmask 255.255.255.248 ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 route add -net 209.88.252.104/29 209.88.252.105 -interface 209.88.252.106 route add -net 209.88.252.112/29 209.88.252.113 -interface 209.88.252.113 route add -net 0.0.0.0 209.88.252.113 Suggest altering to something like...I am assuming that fxp0 is your eterior interface and eth0 is your interior. # section 1 # 0xfffffff8 should be the same as .248 netmask.... #for /etc/rc.conf network_interfaces="eht0 fxp0 lo0" ifconfig_eth0=" inet $IP netmask $MSK" ifconfig_fxp0="inet 209.88.252.105 netmask 0xfffffff8" # section 2 # recommend creating a file called /usr/local/etc/rc.d/vhosts.sh # then put these entries in it... route add -net 0.0.0.0 -interface fxp0 route add -net 209.88.252.104 netmask 0xfffffff8 -interface fxp0 # oh yeah make sure you set the appropriate permissions... #-rwxr-x--x 1 root wheel 1764 May 2 03:57 /usr/local/etc/rc.d/vhost.sh Ok now how to make this work...personally I wouldn't try using my fBSD box to route same mask traffic accross two interfaces...because if you do then you will have to set up route for each host on the interior network...you would find it far easier to recompile the kernel to add ipfw support, and then use the natd/ipfw combo in which case you can use a fictitious ip block like 10.0.0.0 for $IP and 0xff000000 for $MSK, or if you have trouble with class 'A' scopes then try Class a 'B' 192.168.0.0 for $IP and 0xFFFF0000 for $MSK Then it would be a matter of setting up your firewall rules (in /etc/rc.firewall) and turning natd on (in /etc/rc.conf) Fabio Miranda wrote: > Hi, i've been trying to set up my network and it has > been imposible. I have sent many emails and noone has > pointed me in the right way. Please, can anyone help > me? > Problem: > I'm connecting a network to a leased line from my > local company. I have a sever that uses a isa > card(et5025-16 etinc.com) to connect to a dce > (dsu/csu) and from it to the isp. > The isp router is 209.88.252.105 and my IP is > 209.88.252.106(the point to point link), and we > belongs to 209.88.252.114 subnet. > Also, the ISP gave me a subnet: 209.88.252.104/29 and > i want the same server to have 209.88.252.113 and > 209.88.252.114 to 118 are my local machines. > the diagrama: > ISProuter > (209.88.252.105) > - > - > - > - > eth0(209.88.252.106) > FreeBSD > fxp0(209.88.252.113)----->209.88.252.114to118 > machines. > > I want the freebsd machine to route from > 209.88.252.106 interface to 209.88.252.114 and > viceversa, a multihomed server. > > Friends, i have really tried many things and the > answered of my pasts email are kinda confused. > Can anyone tell me something clear? i want to belongs > to FreeBSD comunity! but, docs and all are hard. > > this is what i have done: > > ifconfig eth0 209.88.252.106 209.88.252.106 netmask > 255.255.255.248 > ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 > route add -net 209.88.252.104/29 209.88.252.105 > -interface 209.88.252.106 > route add -net 209.88.252.112/29 209.88.252.113 > -interface 209.88.252.113 > route add -net 0.0.0.0 209.88.252.113 > > 1. What else do i need to make freebsd a router > between the subnet .104 and .112 and make it use the > .113? (pls, write the commands) > 2. Do i need another software? like gated or routed or > natd? > 3. if i dont need any software, what makes "route" a > packages from any of my local machines to the internet > passing by the gatedway (the server)?. > > Thanks alot for any type of help. > > p.s. servers it's a l440gx intel using 3.4-release, > others machines are win98 > > __________________________________________________ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-net" in the body of the message -- Cheers, Mikel +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ | Optimized Computer Solutions, Inc http://www.ocsny.com | 39 W14th Street, Suite 203 212 727 2100 | New York, NY 10011 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ --------------84C0ABF8769A475D786EFF59 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Have you tried a more simplistic approach to your route statements?

 from below you gave us...
ifconfig eth0 209.88.252.106 209.88.252.106 netmask
255.255.255.248
ifconfig fxp0 209.88.252.113 netmask 255.255.255.248
route add -net 209.88.252.104/29 209.88.252.105
-interface 209.88.252.106
route add -net 209.88.252.112/29 209.88.252.113
-interface 209.88.252.113
route add -net 0.0.0.0 209.88.252.113

 Suggest altering to something like...I am assuming that fxp0 is your eterior interface and eth0 is your interior.

# section 1
# 0xfffffff8 should be the same as .248 netmask....
#for /etc/rc.conf
network_interfaces="eht0 fxp0 lo0"
ifconfig_eth0=" inet $IP netmask $MSK"
ifconfig_fxp0="inet 209.88.252.105 netmask 0xfffffff8"

# section 2
# recommend creating a file called /usr/local/etc/rc.d/vhosts.sh
# then put these entries in it...
route add -net 0.0.0.0 -interface fxp0
route add -net 209.88.252.104 netmask 0xfffffff8 -interface fxp0

# oh yeah make sure you set the appropriate permissions...
#-rwxr-x--x  1 root  wheel  1764 May  2 03:57 /usr/local/etc/rc.d/vhost.sh

Ok now how to make this work...personally I wouldn't try using my fBSD box to route same mask traffic accross two interfaces...because if you do then you will have to set up route for each host on the interior network...you would find it far easier to recompile the kernel to add ipfw support, and then use the natd/ipfw combo in which case you can use a fictitious ip block like 10.0.0.0 for $IP and 0xff000000 for $MSK, or if you have trouble with class 'A' scopes then try Class a 'B' 192.168.0.0 for $IP and 0xFFFF0000 for $MSK Then it would be a matter of setting up your firewall rules (in /etc/rc.firewall) and turning natd on (in /etc/rc.conf)
 

Fabio Miranda wrote:

Hi, i've been trying to set up my network and it has
been imposible. I have sent many emails and noone has
pointed me in the right way. Please, can anyone help
me?
Problem:
I'm connecting a network to a leased line from my
local company. I have a sever that uses a isa
card(et5025-16 etinc.com) to connect to a dce
(dsu/csu) and from it to the isp.
The isp router is 209.88.252.105 and my IP is
209.88.252.106(the point to point link), and we
belongs to 209.88.252.114 subnet.
Also, the ISP gave me a subnet: 209.88.252.104/29 and
i want the same server to have 209.88.252.113 and
209.88.252.114 to 118 are my local machines.
the diagrama:
    ISProuter
(209.88.252.105)
       -
       -
       -
       -
eth0(209.88.252.106)
     FreeBSD
fxp0(209.88.252.113)----->209.88.252.114to118
machines.

I want the freebsd machine to route from
209.88.252.106 interface to 209.88.252.114 and
viceversa, a multihomed server.

Friends, i have really tried many things and the
answered of my pasts email are kinda confused.
Can anyone tell me something clear? i want to belongs
to FreeBSD comunity! but, docs and all are hard.

this is what i have done:

ifconfig eth0 209.88.252.106 209.88.252.106 netmask
255.255.255.248
ifconfig fxp0 209.88.252.113 netmask 255.255.255.248
route add -net 209.88.252.104/29 209.88.252.105
-interface 209.88.252.106
route add -net 209.88.252.112/29 209.88.252.113
-interface 209.88.252.113
route add -net 0.0.0.0 209.88.252.113

1. What else do i need to make freebsd a router
between the subnet .104 and .112 and make it use the
.113? (pls, write the commands)
2. Do i need another software? like gated or routed or
natd?
3. if i dont need any software, what makes "route" a
packages from any of my local machines to the internet
passing by the gatedway (the server)?.

Thanks alot for any type of help.

p.s. servers it's a l440gx intel using 3.4-release,
others machines are win98

__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message

--
Cheers,
Mikel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
| Optimized Computer Solutions, Inc        http://www.ocsny.com
| 39 W14th Street, Suite 203                   212 727 2100
| New York, NY 10011
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
  --------------84C0ABF8769A475D786EFF59-- --------------1DAE3D92FF4B71017F0BB8F6 Content-Type: text/x-vcard; charset=us-ascii; name="mikel.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Mikel Content-Disposition: attachment; filename="mikel.vcf" begin:vcard n:King;Mikel tel;fax:2124638402 tel;home:http://www.upan.org tel;work:2127272100 x-mozilla-html:TRUE org:Optimized Computer Solutions version:2.1 email;internet:mikel@ocsny.com title:Director of Network Operations & Technology adr;quoted-printable:;;39 W14th St.=0D=0ASte 203;New York;NY;10011;US note;quoted-printable:fBSD, PHP, MySql and OCS Rule!!!=0D=0A=0D=0AGoal is to be MS free by the end of 2k. x-mozilla-cpt:;7312 fn:Mikel King end:vcard --------------1DAE3D92FF4B71017F0BB8F6-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 6:23:50 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mercury.ukc.ac.uk (mercury.ukc.ac.uk [129.12.21.10]) by hub.freebsd.org (Postfix) with ESMTP id A1D1037B92E for ; Mon, 8 May 2000 06:23:46 -0700 (PDT) (envelope-from ps40@ukc.ac.uk) Received: from pelican.ukc.ac.uk ([129.12.200.26]) by mercury.ukc.ac.uk with esmtp (Exim 2.12 #1) id 12onVg-0007Bd-00 for freebsd-isp@freebsd.org; Mon, 8 May 2000 14:23:44 +0100 Received: from dhcp3937.ukc.ac.uk ([129.12.57.55] helo=PCL2P083) by pelican.ukc.ac.uk with smtp (Exim 1.92 #1) for freebsd-isp@freebsd.org id 12onVh-0002oH-00; Mon, 8 May 2000 14:23:45 +0100 Message-ID: <3916BFDF.448C@ukc.ac.uk> Date: Mon, 08 May 2000 14:23:43 +0100 From: Mike Reply-To: ps40@ukc.ac.uk Organization: >-()-< X-Mailer: Mozilla 3.02 (WinNT; I) MIME-Version: 1.0 To: freebsd-isp@freebsd.org Content-Type: text/plain; charset=iso-8859-7 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org unsubscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 6:41:19 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail3.mia.bellsouth.net (mail3.mia.bellsouth.net [205.152.144.15]) by hub.freebsd.org (Postfix) with ESMTP id 7E65D37B639; Mon, 8 May 2000 06:41:08 -0700 (PDT) (envelope-from almacen@bellsouth.net) Received: from bellsouth.net (host-209-215-29-211.mia.bellsouth.net [209.215.29.211]) by mail3.mia.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id JAA28301; Mon, 8 May 2000 09:36:15 -0400 (EDT) Message-ID: <39171852.8BFDC4E6@bellsouth.net> Date: Mon, 08 May 2000 12:41:06 -0700 From: "O. Nunez de Villavicencio" Organization: The ONVA Group X-Mailer: Mozilla 4.73 [en]C-bls40 (Win95; I) X-Accept-Language: en MIME-Version: 1.0 To: Fabio Miranda Cc: freebsd-questions@FreeBSD.ORG, FreeBSD-net@FreeBSD.ORG, FreeBSD@es.FreeBSD.org, FreeBSD-isp@FreeBSD.ORG Subject: Re: Spanish/English translations on rqst. Request of help! References: <20000508022134.21789.qmail@web125.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Estimado Fabio, Si tuvieras dificultad alguna con lo que te plantean -al ayudarte- dejamelo saber. OK? Orlando = = = = Fabio Miranda wrote: > Hi, i've been trying to set up my network and it has > been imposible. I have sent many emails and noone has > pointed me in the right way. Please, can anyone help > me? > Problem: > I'm connecting a network to a leased line from my > local company. I have a sever that uses a isa > card(et5025-16 etinc.com) to connect to a dce > (dsu/csu) and from it to the isp. > The isp router is 209.88.252.105 and my IP is > 209.88.252.106(the point to point link), and we > belongs to 209.88.252.114 subnet. > Also, the ISP gave me a subnet: 209.88.252.104/29 and > i want the same server to have 209.88.252.113 and > 209.88.252.114 to 118 are my local machines. > the diagrama: > ISProuter > (209.88.252.105) > - > - > - > - > eth0(209.88.252.106) > FreeBSD > fxp0(209.88.252.113)----->209.88.252.114to118 > machines. > > I want the freebsd machine to route from > 209.88.252.106 interface to 209.88.252.114 and > viceversa, a multihomed server. > > Friends, i have really tried many things and the > answered of my pasts email are kinda confused. > Can anyone tell me something clear? i want to belongs > to FreeBSD comunity! but, docs and all are hard. > > this is what i have done: > > ifconfig eth0 209.88.252.106 209.88.252.106 netmask > 255.255.255.248 > ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 > route add -net 209.88.252.104/29 209.88.252.105 > -interface 209.88.252.106 > route add -net 209.88.252.112/29 209.88.252.113 > -interface 209.88.252.113 > route add -net 0.0.0.0 209.88.252.113 > > 1. What else do i need to make freebsd a router > between the subnet .104 and .112 and make it use the > .113? (pls, write the commands) > 2. Do i need another software? like gated or routed or > natd? > 3. if i dont need any software, what makes "route" a > packages from any of my local machines to the internet > passing by the gatedway (the server)?. > > Thanks alot for any type of help. > > p.s. servers it's a l440gx intel using 3.4-release, > others machines are win98 > > __________________________________________________ > Do You Yahoo!? > Send instant messages & get email alerts with Yahoo! Messenger. > http://im.yahoo.com/ > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 7:10:40 2000 Delivered-To: freebsd-isp@freebsd.org Received: from cod.progroup.com (cod.progroup.com [207.44.190.233]) by hub.freebsd.org (Postfix) with ESMTP id 4CC4137B8A0; Mon, 8 May 2000 07:10:30 -0700 (PDT) (envelope-from craig@progroup.com) Received: from progroup.com (guppy.progroup.com [207.44.190.237]) by cod.progroup.com (8.9.2/8.9.2) with ESMTP id HAA87950; Mon, 8 May 2000 07:10:16 -0700 (PDT) (envelope-from craig@progroup.com) Message-ID: <39177377.D7974551@progroup.com> Date: Mon, 08 May 2000 19:09:59 -0700 From: Craig Shaver Organization: Productivity Group, Inc. X-Mailer: Mozilla 4.7 [en] (Win95; I) X-Accept-Language: en MIME-Version: 1.0 To: "O. Nunez de Villavicencio" Cc: Fabio Miranda , freebsd-questions@FreeBSD.ORG, FreeBSD-net@FreeBSD.ORG, FreeBSD@es.FreeBSD.org, FreeBSD-isp@FreeBSD.ORG Subject: Re: Spanish/English translations on rqst. Request of help! References: <20000508022134.21789.qmail@web125.yahoomail.com> <39171852.8BFDC4E6@bellsouth.net> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Also see http://translator.go.com I work on it También vea http://translator.go.com Trabajo en él "O. Nunez de Villavicencio" wrote: > > Estimado Fabio, > > Si tuvieras dificultad alguna con lo que te plantean -al ayudarte- > dejamelo saber. OK? > Orlando > = = = = > > Fabio Miranda wrote: > > > Hi, i've been trying to set up my network and it has > > been imposible. I have sent many emails and noone has > > pointed me in the right way. Please, can anyone help > > me? > > Problem: > > I'm connecting a network to a leased line from my > > local company. I have a sever that uses a isa > > card(et5025-16 etinc.com) to connect to a dce > > (dsu/csu) and from it to the isp. > > The isp router is 209.88.252.105 and my IP is > > 209.88.252.106(the point to point link), and we > > belongs to 209.88.252.114 subnet. > > Also, the ISP gave me a subnet: 209.88.252.104/29 and > > i want the same server to have 209.88.252.113 and > > 209.88.252.114 to 118 are my local machines. > > the diagrama: > > ISProuter > > (209.88.252.105) > > - > > - > > - > > - > > eth0(209.88.252.106) > > FreeBSD > > fxp0(209.88.252.113)----->209.88.252.114to118 > > machines. > > > > I want the freebsd machine to route from > > 209.88.252.106 interface to 209.88.252.114 and > > viceversa, a multihomed server. > > > > Friends, i have really tried many things and the > > answered of my pasts email are kinda confused. > > Can anyone tell me something clear? i want to belongs > > to FreeBSD comunity! but, docs and all are hard. > > > > this is what i have done: > > > > ifconfig eth0 209.88.252.106 209.88.252.106 netmask > > 255.255.255.248 > > ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 > > route add -net 209.88.252.104/29 209.88.252.105 > > -interface 209.88.252.106 > > route add -net 209.88.252.112/29 209.88.252.113 > > -interface 209.88.252.113 > > route add -net 0.0.0.0 209.88.252.113 > > > > 1. What else do i need to make freebsd a router > > between the subnet .104 and .112 and make it use the > > .113? (pls, write the commands) > > 2. Do i need another software? like gated or routed or > > natd? > > 3. if i dont need any software, what makes "route" a > > packages from any of my local machines to the internet > > passing by the gatedway (the server)?. > > > > Thanks alot for any type of help. > > > > p.s. servers it's a l440gx intel using 3.4-release, > > others machines are win98 > > > > __________________________________________________ > > Do You Yahoo!? > > Send instant messages & get email alerts with Yahoo! Messenger. > > http://im.yahoo.com/ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- Craig Shaver, Productivity Group POB 60458 Sunnyvale, CA 94088 (650)390-0654 http://www.progroup.com/ mailto:craig@progroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 8:18:47 2000 Delivered-To: freebsd-isp@freebsd.org Received: from rapidnet.com (rapidnet.com [205.164.216.1]) by hub.freebsd.org (Postfix) with ESMTP id B324D37B65B; Mon, 8 May 2000 08:18:28 -0700 (PDT) (envelope-from nick@rapidnet.com) Received: from localhost (nick@localhost) by rapidnet.com (8.9.3/8.9.3) with ESMTP id JAA73282; Mon, 8 May 2000 09:18:09 -0600 (MDT) Date: Mon, 8 May 2000 09:18:09 -0600 (MDT) From: Nick Rogness To: Mikel Cc: Fabio Miranda , freebsd-questions@FreeBSD.ORG, FreeBSD-net@FreeBSD.ORG, FreeBSD-isp@FreeBSD.ORG Subject: Re: Request of help! In-Reply-To: <3916B6A4.7F5A3728@ocsny.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 8 May 2000, Mikel wrote: > > Fabio Miranda wrote: > > > Hi, i've been trying to set up my network and it has > > been imposible. I have sent many emails and noone has > > pointed me in the right way. Please, can anyone help > > me? > > Problem: > > I'm connecting a network to a leased line from my > > local company. I have a sever that uses a isa > > card(et5025-16 etinc.com) to connect to a dce > > (dsu/csu) and from it to the isp. > > The isp router is 209.88.252.105 and my IP is > > 209.88.252.106(the point to point link), and we > > belongs to 209.88.252.114 subnet. > > Also, the ISP gave me a subnet: 209.88.252.104/29 and > > i want the same server to have 209.88.252.113 and > > 209.88.252.114 to 118 are my local machines. > > the diagrama: 209.88.252.104/29 is not an even subnet. Verify with your ISP. read below. Probably 209.88.252.104/30. Either that or you are stating it wrong. > > ISProuter > > (209.88.252.105) > > - > > - > > - > > - > > eth0(209.88.252.106) > > FreeBSD > > fxp0(209.88.252.113)----->209.88.252.114to118 > > machines. I can't understand what you are trying to say. SO I am following your diagram completely. Give netblocks adn a little more detail. > > > > I want the freebsd machine to route from > > 209.88.252.106 interface to 209.88.252.114 and > > viceversa, a multihomed server. > > This happens automatically if ip_forwarding is on: GATEWAY_ENABLE="YES" > > Friends, i have really tried many things and the > > answered of my pasts email are kinda confused. > > Can anyone tell me something clear? i want to belongs > > to FreeBSD comunity! but, docs and all are hard. > > I think you and your ISP are confused on the subnetting end. You should verify your settings. THis is really not that hard. > > this is what i have done: > > > > ifconfig eth0 209.88.252.106 209.88.252.106 netmask > > 255.255.255.248 > > ifconfig fxp0 209.88.252.113 netmask 255.255.255.248 OK. > > route add -net 209.88.252.104/29 209.88.252.105 > > -interface 209.88.252.106 Shouldn't need this statement .104/29 is directly connected interface. > > route add -net 209.88.252.112/29 209.88.252.113 > > -interface 209.88.252.113 This satement is wrong. 209.88.252.112 is not a network boundary for a /29 CIDR. Your networks are .0/29 and .8/29. WHat are you trying to do here? 209.88.252.112/29 contains: 209.88.252.108 --> 209.88.252.115 > > route add -net 0.0.0.0 209.88.252.113 Why is your default route going to .113? SHouldn't it be 209.88.252.105, the ISP? > > > > 1. What else do i need to make freebsd a router > > between the subnet .104 and .112 and make it use the > > .113? (pls, write the commands) Look at your /etc/rc.conf file. You should see a couple of lines: GATEWAY_ENABLE="YES" > > 2. Do i need another software? like gated or routed or > > natd? Not neccessary unless you want to exchange routes between machines. Your setup is very simple. Static routes should not be neccessary (Except your default gateway) and as long asip forwarding is on (GATEWAY_ENABLE) it should work. Also, the ISP should be holding the static routes for the following net, within their routers, or you will have to run a Dynamic Routing package like gated, Eitherway, make sure the ISP can get to your .112/29 network: route add -net 209.88.252.112/29 209.88.252.6/32 Nick Rogness - Speak softly and carry a Gigabit switch. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 8:25:47 2000 Delivered-To: freebsd-isp@freebsd.org Received: from ns1.walls-media.com (ns1.walls-media.com [206.166.197.1]) by hub.freebsd.org (Postfix) with ESMTP id 1BD1137B963 for ; Mon, 8 May 2000 08:25:40 -0700 (PDT) (envelope-from bryanb@walls-media.com) Received: from ntwksbry ([206.166.197.58]) by ns1.walls-media.com (Post.Office MTA Undefined release Undefined ID# 0-67172U100L2S100V35) with SMTP id com; Mon, 8 May 2000 10:25:23 -0500 From: "Bryan Bunch" To: "Doug Barton" Cc: Subject: RE: MRTG / Cisco 3810 Date: Mon, 8 May 2000 10:25:34 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <3915BBE3.1E68950E@gorean.org> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Bryan Bunch wrote: > > > > Cricket can be found at: > > > > http://www.munitions.com/~jra/cricket/ > > What are the advantages to cricket over mrtg? > > -- > "Live free or die" > - State motto of my ancestral homeland, New Hampshire > > Do YOU Yahoo!? I have been using cricket for about 6 months now and really like its functionality. As far as having any advantages over MRTG, I don't see any glaring reason to change if you already use MRTG and like it. I will say that it was more complex to get running and I had a great deal of frustration in getting it to work like I wanted it to, but like most things, once you get it where you want it, it works nicely and you can 'tweak' the settings to get things working exactly as you see fit. One thing to note, since it generates the graphs 'on the fly' (unlike mrtg) it is quite sluggish on your web server. To make things bearable, I highly recommend using mod-perl, it makes things much snappier and you don't really notice the delay. Just my 2 cents worth. Bryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 10:19: 4 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail.numachi.com (numachi.numachi.com [198.175.254.2]) by hub.freebsd.org (Postfix) with SMTP id 371A237BBF6 for ; Mon, 8 May 2000 10:18:54 -0700 (PDT) (envelope-from reichert@numachi.com) Received: (qmail 8197 invoked by uid 1001); 8 May 2000 17:18:42 -0000 Date: Mon, 8 May 2000 13:18:42 -0400 From: Brian Reichert To: Warner Losh Cc: freebsd-mobile@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: LinkSys NP100 vs the universe Message-ID: <20000508131842.A7933@numachi.com> References: <20000504160754.A29902@numachi.com> <200005060446.WAA59146@harmony.village.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre4i In-Reply-To: <200005060446.WAA59146@harmony.village.org>; from imp@village.org on Fri, May 05, 2000 at 10:46:59PM -0600 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, May 05, 2000 at 10:46:59PM -0600, Warner Losh wrote: > In message <20000504160754.A29902@numachi.com> Brian Reichert writes: > : The card _mostly_ works, in that only some kinds of hosts can it interact > : with in certain ways. > > Is this the "I suspend and then things go to hell problem" or the "I > have a IRQ conflict, but things mostly work" problem? > > : The laptop can ping the desktop. Both machine's arp tables (modulo > : 'permanent'): > > Maybe this is the "I configured my network card at a the same IRQ as > another card and things aren't working" problem. If so, configure a > different IRQ. Nope, this is the card from the 'linksys vs cisco' thread that I started on April 21. Not a suspend problem. Not an IRQ problem. The symptom are that I can, on some networks, I can establish outgoing connections just fine, on other nets, I can't even ping. > Warner > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Brian 'you Bastard' Reichert reichert@numachi.com 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA Intel architecture: the left-hand path To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 14:15:55 2000 Delivered-To: freebsd-isp@freebsd.org Received: from slarti.muc.de (slarti.muc.de [193.149.48.10]) by hub.freebsd.org (Postfix) with SMTP id 7067437B663 for ; Mon, 8 May 2000 14:15:51 -0700 (PDT) (envelope-from jhs@jhs.muc.de) Received: (qmail 5169 invoked from network); 8 May 2000 21:19:54 -0000 Received: from jhs.muc.de (193.149.49.84) by slarti.muc.de with SMTP; 8 May 2000 21:19:54 -0000 Received: from park.jhs.no_domain (localhost [127.0.0.1]) by jhs.muc.de (8.9.3/8.9.3) with ESMTP id JAA16577; Mon, 8 May 2000 09:28:09 GMT (envelope-from jhs@park.jhs.no_domain) Message-Id: <200005080928.JAA16577@jhs.muc.de> To: spork Cc: "Gary D. Margiotta" , Matt Heckaman , FreeBSD-ISP Subject: Re: freebsd hosting. From: "Julian Stacey" Organization: Vector Systems Ltd - Unix & Internet consultancy X-Web: http://www.jhs.muc.de http://bim.bsn.com/~jhs/ In-reply-to: Your message of "Fri, 05 May 2000 16:00:25 EDT." Date: Mon, 08 May 2000 11:28:09 +0200 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > We've also run into downright strange things with BA North techs. Twice > we've had them leave gear on site, and the customer reported finding: > > -in one, neosporin and condoms > -in another vaseline and visine > > I don't even want to know how these items were used during the line > repair. I'm English (in Germany), & have no idea what neosporin & visine are ? possibly American brand medicinal goods ? inded possibly better not to know ? As this list is International, I'll mention that "vaseline" is a trade mark for what is better genericly known as petroleum jelly, (also common in Britian BTW). There are genuine engineering uses for petroleum jelly :-) EG look inside a good quality transistor radio, if the large white nylon cog wheel on the tuning capacitor is a 2 part one, you will see the 2 parts are vaseline lubricated, with a spring to brace the 2 cogs in opposite directions, so there is no slack, just one example, many other uses, it's useful in a technicians toolkit, for many other chassis/door/slider type things .... look inside a cdrom drive, it's often on the head seek spiral rod etc. 2 containers of vaseline are safer than one, one for human use (abraded skin/ nuckles etc on equipment racks ?), & 1 for machine use (rack sliders with ball bearings etc ?), one doesn't want cross contamination of metal fillings ! Vaseline chemically attacks the material many condoms are made of, one can only hope/assume each item is used appropriately :-) Julian - Julian Stacey http://bim.bsn.com/~jhs/ Umsonst: FreeBSD + 3200 packages, sources, Netscape, WordPerfect & StarWriter. RaucherKrebsNebel erregt mein Kopfschmerz & Angriffslust: Schnupftabak Nutzen! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 14:41:37 2000 Delivered-To: freebsd-isp@freebsd.org Received: from server.comnix.com (ns1.comnix.com [195.196.30.50]) by hub.freebsd.org (Postfix) with SMTP id CB87B37BE81 for ; Mon, 8 May 2000 14:41:32 -0700 (PDT) (envelope-from john@veidit.net) Received: (qmail 8580 invoked from network); 2 May 2000 13:34:44 -0000 Received: from unknown (HELO veidit.net) (193.44.56.36) by 195.196.30.50 with SMTP; 2 May 2000 13:34:44 -0000 Message-ID: <390ED974.14CB36C6@veidit.net> Date: Tue, 02 May 2000 15:34:44 +0200 From: John Angelmo X-Mailer: Mozilla 4.72 [en] (Win98; U) X-Accept-Language: sv, en MIME-Version: 1.0 To: FreeBSD ISP Subject: Virusmail check Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi I have just installed a small server that will later have about 10 high priority mail users and now I wonder how can I virus scan the email that enters my computer and the one they also send out by that computer? /John Angelmo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 18:38:24 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hotmail.com (f215.law8.hotmail.com [216.33.241.215]) by hub.freebsd.org (Postfix) with SMTP id 6206E37BA2F for ; Mon, 8 May 2000 18:38:20 -0700 (PDT) (envelope-from jmd526@hotmail.com) Received: (qmail 56945 invoked by uid 0); 9 May 2000 01:38:19 -0000 Message-ID: <20000509013819.56944.qmail@hotmail.com> Received: from 209.220.228.2 by www.hotmail.com with HTTP; Mon, 08 May 2000 18:38:19 PDT X-Originating-IP: [209.220.228.2] From: "John Daniels" To: freebsd-isp@freebsd.org, freebsd-hackers@freebsd.org Subject: *BSD RULES! (especially if you *VOTE*) Date: Mon, 08 May 2000 21:38:19 EDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi: If you have not seen my previous emails asking for your vote for a native port of Java on *BSD at Sun's Java Developers Connection (JDC), please vote now (JDC membership is free) at: * http://developer.java.sun.com/developer/bugParade/bugs/4288745.html If you would like more information, please see: * http://www.freebsd.org/java If have voted already, THANK YOU. Did you know that you have 3 votes? (unethical? Hey I don't make the rules) Now for some statistics: Since my first message about 3 weeks ago, nearly 400 votes have been recorded for the Java on FreeBSD Request for Enhancement (RFE), an increase of 13.4%! Our RFE now has 4 times as many votes as the #2 RFE, and as many votes as the next 8. The more votes that we can get, the more powerful is the *BSD message to Sun. FYI: IBM has announced an "early release" of JDK 1.3 on Linux. Several *BSD friendly folks have started requesting a port of the IBM JDK in the discussion forum at: * http://www.alphaworks.ibm.com/aw.nsf/discussion?ReadForm&/forum/linuxjdk.nsf/discussion?createdocument (Look for "FreeBSD support" in the Linux-JDK-1.3.0 discussion list.) This will be my last "get out the vote" message for a while, as I think that I have reached most people who care to vote. Lastly, I would like to thank the FreeBSD Java porting team once again for their outstanding efforts. I, myself, am not a part of the java porting team, just a user who would like to use a native port and support the *BSD platform. John PS Please forward this message to any person, list, or organization that may want to support this effort. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 18:41: 6 2000 Delivered-To: freebsd-isp@freebsd.org Received: from riga.nu (riga.nu.138.62.195.in-addr.arpa [195.62.138.40]) by hub.freebsd.org (Postfix) with SMTP id 5756F37BC34 for ; Mon, 8 May 2000 18:41:01 -0700 (PDT) (envelope-from viktors@riga.nu) Received: (qmail 1043 invoked from network); 9 May 2000 01:40:44 -0000 Received: from unknown (HELO riga.nu) (159.148.169.200) by riga.nu with SMTP; 9 May 2000 01:40:44 -0000 Message-ID: <39176C9A.1C350B2B@riga.nu> Date: Tue, 09 May 2000 03:40:43 +0200 From: Viktors Rotanovs Organization: DATIONS Ltd. X-Mailer: Mozilla 4.72 [en] (X11; I; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@FreeBSD.org Subject: ip accounting log file analyzer Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! Does anyone know some log file analyzer for bpft/cisco log files that allows to define networks and summarize traffic from/to network? Best Wishes, Viktors Rotanovs DATIONS Ltd., phone: +371 9173000, fax: +371 7377472 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon May 8 19: 8: 8 2000 Delivered-To: freebsd-isp@freebsd.org Received: from smtp-out2.bellatlantic.net (smtp-out2.bellatlantic.net [199.45.39.157]) by hub.freebsd.org (Postfix) with ESMTP id 72B2537B632; Mon, 8 May 2000 19:08:02 -0700 (PDT) (envelope-from jan@smartsoft.cc) Received: from smartsoft.cc (client-209-158-92-140.bellatlantic.net [209.158.92.140]) by smtp-out2.bellatlantic.net (8.9.1/8.9.1) with ESMTP id WAA01451; Mon, 8 May 2000 22:07:52 -0400 (EDT) Message-ID: <391772AC.7C25800C@smartsoft.cc> Date: Mon, 08 May 2000 22:06:36 -0400 From: Jan Knepper Organization: Smartsoft, LLC X-Mailer: Mozilla 4.72 [en] (Windows NT 5.0; I) X-Accept-Language: en MIME-Version: 1.0 To: John Daniels Cc: freebsd-isp@freebsd.org, freebsd-hackers@freebsd.org Subject: Re: *BSD RULES! (especially if you *VOTE*) References: <20000509013819.56944.qmail@hotmail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org John Daniels wrote: > If you have not seen my previous emails asking for your vote for a > native port of Java on *BSD at Sun's Java Developers Connection > (JDC), please vote now (JDC membership is free) at: > > * http://developer.java.sun.com/developer/bugParade/bugs/4288745.html > > If you would like more information, please see: > > * http://www.freebsd.org/java Done! > If have voted already, THANK YOU. Did you know that you have 3 > votes? (unethical? Hey I don't make the rules) Yeah! But I am an ethical kind of guy... My better half (http://www.pianoprincess.com/) voted too though! Don't worry, be Kneppie! Jan -- =============================================================== Jan Knepper Smartsoft, LLC 88 Petersburg Road Petersburg, NJ 08270 U.S.A. Phone: 609-628-4260 FAX : 609-628-1267 http://www.smartsoft.cc/ --------------------------------------------------------------- http://www.pianoprincess.com/ http://www.mp3.com/pianoprincess http://www.riffage.com/Bands/0,2939,2859,00.html http://pianoprincess.iuma.com/ http://www.changemusic.com/piano_princess =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 4:35:57 2000 Delivered-To: freebsd-isp@freebsd.org Received: from durango.picus.com (durango.picus.com [209.100.20.19]) by hub.freebsd.org (Postfix) with ESMTP id 9711F37B583 for ; Tue, 9 May 2000 04:35:53 -0700 (PDT) (envelope-from troy@picus.com) Received: from abyss [209.100.22.254] by durango.picus.com (SMTPD32-5.05) id A7D56500144; Tue, 09 May 2000 07:34:45 -0400 From: "Troy Settle" To: "Julian Stacey" , "spork" Cc: "Gary D. Margiotta" , "Matt Heckaman" , "FreeBSD-ISP" Subject: RE: freebsd hosting. Date: Tue, 9 May 2000 07:35:16 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <200005080928.JAA16577@jhs.muc.de> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org ** ** > We've also run into downright strange things with BA North ** techs. Twice ** > we've had them leave gear on site, and the customer reported finding: ** > ** > -in one, neosporin and condoms ** > -in another vaseline and visine ** > ** > I don't even want to know how these items were used during the line ** > repair. ** ** I'm English (in Germany), & have no idea what neosporin & visine are ? ** possibly American brand medicinal goods ? inded possibly ** better not to know ? Neosporin is an anti-septic cream, used to treat cuts and the like. Visine is for dry, red, irritated eyes. Wow. (US folks will get that) Vaseline (petroelium jelly) was well explained by the English fellow from Germany. Condoms? They were probably finger cots, a first aid necessity for anyone who often messes up their fingers. They look like condoms, but are small enough to be snug when placed on a finger. Often used to hold bandages in place. If you've ever cut your knuckles or finger tips while working on equipment, I'm sure would appreciate the finger cot. They work very well. (they're also very good as gag gifts for your friends :) -Troy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 5: 1: 4 2000 Delivered-To: freebsd-isp@freebsd.org Received: from liberty.bulinfo.net (liberty.bulinfo.net [212.72.195.7]) by hub.freebsd.org (Postfix) with SMTP id EBA5537BE0F for ; Tue, 9 May 2000 05:00:53 -0700 (PDT) (envelope-from krassi@bulinfo.net) Received: (qmail 5599 invoked from network); 9 May 2000 12:00:47 -0000 Received: from pythia.bulinfo.net (HELO bulinfo.net) (212.72.195.5) by liberty.bulinfo.net with SMTP; 9 May 2000 12:00:47 -0000 Message-ID: <3917FDE8.F26FBDB6@bulinfo.net> Date: Tue, 09 May 2000 15:00:40 +0300 From: Krassimir Slavchev X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.13 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org, freebsd-hackers@freebsd.org Subject: Modem stuff? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, We have some FreeBSD based terminal servers with 32 modems each. How can deny +++ATH0 attacks to our Dial-Up clients? I have been already set S2=127(disable escape character) on servers modems, but clients modems also need to set S2 register. I try to set remote modems with ping containing pattern "+++ATS2=127&WO1\r", in many times successfully, but any of modems can not be set properly. It is possible to filter IP packets containing patterns like +++ATH0 or any other way to set S2 register remotely? Thanks in advance Regards -- Krassimir Slavchev Bulinfo Ltd. krassi@bulinfo.net (+359-2)963-3652 http://www.bulinfo.net (+359-2)963-3764 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 8:21:43 2000 Delivered-To: freebsd-isp@freebsd.org Received: from riga.nu (riga.nu.138.62.195.in-addr.arpa [195.62.138.40]) by hub.freebsd.org (Postfix) with SMTP id 36E5637B8D3 for ; Tue, 9 May 2000 08:21:38 -0700 (PDT) (envelope-from viktors@riga.nu) Received: (qmail 12314 invoked from network); 9 May 2000 15:21:24 -0000 Received: from unknown (HELO riga.nu) (159.148.169.200) by riga.nu with SMTP; 9 May 2000 15:21:24 -0000 Message-ID: <39182CF1.89D675B8@riga.nu> Date: Tue, 09 May 2000 17:21:21 +0200 From: Viktors Rotanovs Organization: DATIONS Ltd. X-Mailer: Mozilla 4.72 [en] (X11; I; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: slightly offtopic Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! Does anyone know if average Java/JSP/etc developer's per/hour rate is higher than PHP developer's? I'm new to offsite/per-hour payments, so forgive me if question is not exactly correct :) Best Wishes, Viktors Rotanovs DATIONS Ltd., phone: +371 9173000, fax: +371 7377472 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 8:46:24 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id 3B65937B811; Tue, 9 May 2000 08:46:19 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id LAA73551; Tue, 9 May 2000 11:46:17 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005091546.LAA73551@larryboy.graphics.cornell.edu> To: freebsd-questions@freebsd.org, freebsd-isp@freebsd.org Cc: mkc@larryboy.graphics.cornell.edu Subject: 3.0-R server /var running out of inodes (not a usenet question) Date: Tue, 09 May 2000 11:46:17 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is mystifying. I have a server running 3.0-R that serves DNS, ntp, NIS, NFS, sendmail, imap, pop, majordomo, DHCP, and syslog. That might seem like a lot but the user base is small (less than 100) and the machine count is something less than 256. NFS serving is minor for this machine. Most NFS load is on a different system. The cpu load is normally very low and the machine just hums along, usually. The strange things is that every once in a blue moon this system goes belly-up with the message "/var out of inodes" on the console. After rebooting it looks like this: # df -i -t ufs Filesystem 1K-blocks Used Avail Capacity iused ifree %iused Mounted on /dev/da0s1a 99183 20053 71196 22% 1015 24071 4% / /dev/da0s1e 992239 548 912312 0% 36 249818 0% /tmp /dev/da0s1f 1984479 834699 991022 46% 102187 397779 20% /usr /dev/da0s1g 1984479 536817 1288904 29% 9222 490744 2% /var Note that /var only has 2% of inodes in use! Hunting through my log files I don't find any clues suggesting what happened. Has anyone seen anything like this before or have any thoughts what the cause might be? It happens so infrequently that I don't get many chances to try to debug it, and when it does the priority is to get it back online as quickly as possible being that it's a critical resource. (Everything but ntp and the e-mail services are redundantly served by other machines, but of course panic sets in quickly when people can't check their e-mail once per minute!) If I'm not right here when it happens, someone else reboots it and I don't even get to see the console! -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 9:55:49 2000 Delivered-To: freebsd-isp@freebsd.org Received: from post.xecu.net (post.xecu.net [216.127.136.211]) by hub.freebsd.org (Postfix) with ESMTP id 4A56237BDF8 for ; Tue, 9 May 2000 09:55:46 -0700 (PDT) (envelope-from andy@xecu.net) Received: from shell.xecu.net (shell.xecu.net [216.127.136.216]) by post.xecu.net (Postfix) with ESMTP id E0653477F for ; Tue, 9 May 2000 12:53:19 -0400 (EDT) Received: from localhost (andy@localhost) by shell.xecu.net (8.8.8+Sun/8.8.8) with ESMTP id MAA01232 for ; Tue, 9 May 2000 12:55:02 -0400 (EDT) X-Authentication-Warning: shell.xecu.net: andy owned process doing -bs Date: Tue, 9 May 2000 12:55:01 -0400 (EDT) From: Andy Dills To: freebsd-isp@freebsd.org Subject: subscribe Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 11:49: 4 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hindenburg.eboai.org (hindenburg.eboai.org [205.181.254.190]) by hub.freebsd.org (Postfix) with ESMTP id 15FEE37B5A4 for ; Tue, 9 May 2000 11:49:01 -0700 (PDT) (envelope-from chip@chocobo.cx) Received: by hindenburg.eboai.org (Postfix, from userid 1000) id 8B5F43D3D; Tue, 9 May 2000 14:48:59 -0400 (EDT) Date: Tue, 9 May 2000 14:48:59 -0400 From: Chip Marshall To: freebsd-isp@freebsd.org Subject: Packet priority Message-ID: <20000509144859.A37810@setzer.chocobo.cx> Reply-To: chip@chocobo.cx Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.4i X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 3.4-RELEASE i386 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've been asked by my boss to look into some ways of keeping our newsfeed from filling our outgoing T1 lines. At the moment we are just using the ipfw dummynet stuff to limit the bandwidth of the newsfeeds to less than that of the T1 lines, but that is not ideal. What I'm looking to do is some sort of prioritizing of packets for delivery on our FreeBSD routers. What I kindof have in mind is a system that would give non-news traffic a higher priority than news traffic, so that news is the first thing to have it's bandwidth cut. Am I making any sense here? Is there any way to do this in FreeBSD? -- Chip Marshall http://www.chocobo.cx/chip/ Finger for PGP GCM/CS d+(-) s+:++ a18>? C++ UB++++$ P+++$ L- E--- W++ N+@ o K- w O M+ V-- PS PE Y? PGP++ t+@ 5 X R>+ tv+() b++>+++ DI++++ D(-) G++ e>++ h!>++ r-- y- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 12: 3:32 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail.numachi.com (numachi.numachi.com [198.175.254.2]) by hub.freebsd.org (Postfix) with SMTP id 7817337BEB2 for ; Tue, 9 May 2000 12:03:28 -0700 (PDT) (envelope-from reichert@numachi.com) Received: (qmail 19283 invoked by uid 1001); 9 May 2000 19:03:26 -0000 Date: Tue, 9 May 2000 15:03:26 -0400 From: Brian Reichert To: chip@chocobo.cx Cc: freebsd-isp@freebsd.org Subject: Re: Packet priority Message-ID: <20000509150325.G17121@numachi.com> References: <20000509144859.A37810@setzer.chocobo.cx> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre4i In-Reply-To: <20000509144859.A37810@setzer.chocobo.cx>; from chip@setzer.chocobo.cx on Tue, May 09, 2000 at 02:48:59PM -0400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, May 09, 2000 at 02:48:59PM -0400, Chip Marshall wrote: > What I'm looking to do is some sort of prioritizing of packets for > delivery on our FreeBSD routers. What I kindof have in mind is a > system that would give non-news traffic a higher priority than news > traffic, so that news is the first thing to have it's bandwidth cut. Look at dummynet... > Am I making any sense here? Is there any way to do this in FreeBSD? > > -- > Chip Marshall http://www.chocobo.cx/chip/ Finger for PGP > GCM/CS d+(-) s+:++ a18>? C++ UB++++$ P+++$ L- E--- W++ N+@ o K- w O M+ V-- > PS PE Y? PGP++ t+@ 5 X R>+ tv+() b++>+++ DI++++ D(-) G++ e>++ h!>++ r-- y- -- Brian 'you Bastard' Reichert reichert@numachi.com 37 Crystal Ave. #303 Daytime number: (603) 434-6842 Derry NH 03038-1713 USA Intel architecture: the left-hand path To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 13:13:44 2000 Delivered-To: freebsd-isp@freebsd.org Received: from info.iet.unipi.it (info.iet.unipi.it [131.114.9.184]) by hub.freebsd.org (Postfix) with ESMTP id B761937C2B8 for ; Tue, 9 May 2000 13:12:26 -0700 (PDT) (envelope-from luigi@info.iet.unipi.it) Received: (from luigi@localhost) by info.iet.unipi.it (8.9.3/8.9.3) id WAA24116; Tue, 9 May 2000 22:13:18 +0200 (CEST) (envelope-from luigi) From: Luigi Rizzo Message-Id: <200005092013.WAA24116@info.iet.unipi.it> Subject: Re: Packet priority In-Reply-To: <20000509150325.G17121@numachi.com> from Brian Reichert at "May 9, 2000 03:03:26 pm" To: Brian Reichert Date: Tue, 9 May 2000 22:13:18 +0200 (CEST) Cc: chip@chocobo.cx, freebsd-isp@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > On Tue, May 09, 2000 at 02:48:59PM -0400, Chip Marshall wrote: > > What I'm looking to do is some sort of prioritizing of packets for > > delivery on our FreeBSD routers. What I kindof have in mind is a ... > Look at dummynet... as the original poster said, dummynet does not do priorities, only static bandwidth allocation (at the moment, that is!), and is not what he needs. cheers luigi -----------------------------------+------------------------------------- Luigi RIZZO, luigi@iet.unipi.it . Dip. di Ing. dell'Informazione http://www.iet.unipi.it/~luigi/ . Universita` di Pisa TEL/FAX: +39-050-568.533/522 . via Diotisalvi 2, 56126 PISA (Italy) Mobile +39-347-0373137 -----------------------------------+------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 13:37:30 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mx1.inr.net (mx1.inr.net [198.77.208.10]) by hub.freebsd.org (Postfix) with ESMTP id BEE1637C063 for ; Tue, 9 May 2000 13:36:16 -0700 (PDT) (envelope-from mylists@inr.net) Received: from wakko (wakko.inr.net [198.77.208.4]) by mx1.inr.net (8.9.3/8.9.3) with SMTP id QAA55963 for ; Tue, 9 May 2000 16:35:52 -0400 (EDT) Message-Id: <3.0.6.32.20000509163611.01062ea0@mail.inr.net> X-Sender: mylists@mail.inr.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Tue, 09 May 2000 16:36:11 -0400 To: freebsd-isp@freebsd.org From: "N.B. DelMore" Subject: Needed: 95th Percentile Script Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Does anyone have, or can anyone point me to, a script that will allow me to process 95% percentile bandwidth utilization statistics using MRTG? Their is a link on the MRTG site for such a script but the link is broken. Thank you. Noel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue May 9 20:10: 4 2000 Delivered-To: freebsd-isp@freebsd.org Received: from showcase.pdsys.com (showcase.pdsys.com [207.167.12.13]) by hub.freebsd.org (Postfix) with ESMTP id 46B9137BA3F for ; Tue, 9 May 2000 20:09:46 -0700 (PDT) (envelope-from jim@pdsys.com) Received: from dooley ([24.108.11.34]) by showcase.pdsys.com (Post.Office MTA v3.5.3 release 223 ID# 0-56457U100L100S0V35) with SMTP id com; Tue, 9 May 2000 20:56:26 -0600 From: "Jim Whitelaw" To: "freebsd-isp@freebsd.org" Cc: "chip@chocobo.cx" Date: Tue, 09 May 2000 18:51:34 -0600 Reply-To: "Jim Whitelaw" X-Mailer: PMMail 2000 Professional (2.10.2010) For Windows NT (4.0.1381;5) In-Reply-To: <20000509144859.A37810@setzer.chocobo.cx> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Packet priority Message-ID: <20000510025626515.AAA194@showcase.pdsys.com@dooley> Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 9 May 2000 14:48:59 -0400, Chip Marshall wrote: >What I'm looking to do is some sort of prioritizing of packets for >delivery on our FreeBSD routers. What I kindof have in mind is a >system that would give non-news traffic a higher priority than news >traffic, so that news is the first thing to have it's bandwidth cut. I think that ALTQ might be what you're looking for: http://www.csl.sony.co.jp/person/kjc/programs.html The ALTQ page says that ALTQ is integrated into KAME IPv6 and since KAME IPv6 was integrated into FBSD 4.0, you may already have it if you're running 4.0. ========================================================================= Jim Whitelaw tel: +1.780.975.1534 jim-at-pdsys-dot-com fax: +1.780.484.9239 Pathways Data Systems Inc. http://www.pdsys.com/ ========================================================================= "It is best to assume that the network is filled with malevolent entities that will send packets designed to have the worst possible effect." - F.Baker, RFC1812 -----BEGIN PGP SIGNATURE----- Version: PGPsdk version 1.7.1 (C) 1997-1999 Network Associates, Inc. and its affiliated companies. iQA/AwUBORiylio2mWE/JSfJEQJzFQCg1Omu1goviFOJVQcn0bqaEd5bxmUAoJts NT+LTVns31LY5JSwFJG2bBeB =7dEu -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 0:27:19 2000 Delivered-To: freebsd-isp@freebsd.org Received: from firewall.ugal.ro (firewall.ugal.ro [193.231.148.9]) by hub.freebsd.org (Postfix) with ESMTP id DA69837B65A for ; Wed, 10 May 2000 00:27:06 -0700 (PDT) (envelope-from s81014b@stud-univ.ugal.ro) Received: from stud-univ.ugal.ro (s81014b@mars.nil.ugal.ro [10.11.4.60]) by firewall.ugal.ro (8.9.3/8.9.3) with ESMTP id KAA15834 for ; Wed, 10 May 2000 10:25:05 +0300 Received: (from s81014b@localhost) by stud-univ.ugal.ro (8.9.3/8.9.3) id KAA02437; Wed, 10 May 2000 10:26:14 +0300 Date: Wed, 10 May 2000 10:26:14 +0300 From: 1014bs8 Message-Id: <200005100726.KAA02437@stud-univ.ugal.ro> To: freebsd-isp@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-URL: http://lists.openresources.com/FreeBSD/freebsd-questions/msg11051.html X-Mailer: Lynx, Version 2.8.1rel.2 Subject: ???? Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org HI !!! I WILL BE SHORT STRAIGHT THANK YOU IF YOU NOW EMAIL ME AT :naspet@mailcity.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 0:41:40 2000 Delivered-To: freebsd-isp@freebsd.org Received: from ren.sasknow.com (ren.sasknow.com [207.195.92.131]) by hub.freebsd.org (Postfix) with ESMTP id B608837B561 for ; Wed, 10 May 2000 00:41:37 -0700 (PDT) (envelope-from ryan@sasknow.com) Received: from localhost (ryan@localhost) by ren.sasknow.com (8.9.3/8.9.3) with ESMTP id BAA71949; Wed, 10 May 2000 01:42:15 -0600 (CST) (envelope-from ryan@sasknow.com) Date: Wed, 10 May 2000 01:42:14 -0600 (CST) From: Ryan Thompson To: 1014bs8 Cc: freebsd-isp@FreeBSD.ORG Subject: Re: ???? In-Reply-To: <200005100726.KAA02437@stud-univ.ugal.ro> Message-ID: Organization: SaskNow Technologies [www.sasknow.com] MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org 1014bs8 wrote to freebsd-isp@FreeBSD.ORG: > HI !!! > I WILL BE SHORT STRAIGHT ANSAMBLER??> > THANK YOU IF YOU NOW EMAIL ME AT :naspet@mailcity.com Add this (from LINT) to your kernel. config, make depend, make and make install, and reboot the system OPTIONS SC_DISABLE_REBOOT # disable reboot key sequence -- Ryan Thompson Systems Administrator, Accounts Phone: +1 (306) 664-1161 SaskNow Technologies http://www.sasknow.com #106-380 3120 8th St E Saskatoon, SK S7H 0W2 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 1:23:58 2000 Delivered-To: freebsd-isp@freebsd.org Received: from info.iet.unipi.it (info.iet.unipi.it [131.114.9.184]) by hub.freebsd.org (Postfix) with ESMTP id 05BEA37B8B4 for ; Wed, 10 May 2000 01:23:50 -0700 (PDT) (envelope-from luigi@info.iet.unipi.it) Received: (from luigi@localhost) by info.iet.unipi.it (8.9.3/8.9.3) id KAA26303; Wed, 10 May 2000 10:24:33 +0200 (CEST) (envelope-from luigi) From: Luigi Rizzo Message-Id: <200005100824.KAA26303@info.iet.unipi.it> Subject: Re: Packet priority In-Reply-To: <20000510025626515.AAA194@showcase.pdsys.com@dooley> from Jim Whitelaw at "May 9, 2000 06:51:34 pm" To: Jim Whitelaw Date: Wed, 10 May 2000 10:24:33 +0200 (CEST) Cc: "freebsd-isp@freebsd.org" , "chip@chocobo.cx"@info.iet.unipi.it, chip@chocobo.cx, kjc@csl.sony.co.jp X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >What I'm looking to do is some sort of prioritizing of packets for > >delivery on our FreeBSD routers. What I kindof have in mind is a > >system that would give non-news traffic a higher priority than news > >traffic, so that news is the first thing to have it's bandwidth cut. > > I think that ALTQ might be what you're looking for: > > http://www.csl.sony.co.jp/person/kjc/programs.html i _think_ ALTQ uses the tx clock of the card for doing the scheduling. So unless you have an ATM card (which i have heard has an embedded shaper supported by ALTQ) or you are directly interfacing with your T1 via a card whose driver has ALTQ support, you are out of luck with ALTQ for this particular application. Kenjiro, can you confirm this if you are listening ? cheers luigi -----------------------------------+------------------------------------- Luigi RIZZO, luigi@iet.unipi.it . Dip. di Ing. dell'Informazione http://www.iet.unipi.it/~luigi/ . Universita` di Pisa TEL/FAX: +39-050-568.533/522 . via Diotisalvi 2, 56126 PISA (Italy) Mobile +39-347-0373137 -----------------------------------+------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 3:19:18 2000 Delivered-To: freebsd-isp@freebsd.org Received: from inetfw.sonycsl.co.jp (inetfw.SonyCSL.Co.Jp [203.137.129.4]) by hub.freebsd.org (Postfix) with ESMTP id AF23937B5C4 for ; Wed, 10 May 2000 03:19:14 -0700 (PDT) (envelope-from kjc@csl.sony.co.jp) Received: from hotaka.csl.sony.co.jp (hotaka.csl.sony.co.jp [43.27.98.57]) by inetfw.sonycsl.co.jp (8.9.3+3.2W/3.7Ws3/inetfw/2000050701/smtpfeed 1.01) with ESMTP id TAA67783; Wed, 10 May 2000 19:19:02 +0900 (JST) Received: from localhost (localhost [127.0.0.1]) by hotaka.csl.sony.co.jp (8.9.3/3.7Ws3/hotaka/2000050700) with ESMTP id TAA23927; Wed, 10 May 2000 19:19:01 +0900 (JST) To: luigi@info.iet.unipi.it Cc: jim@pdsys.com, freebsd-isp@FreeBSD.ORG, "chip@chocobo.cx"@info.iet.unipi.it, chip@chocobo.cx Subject: Re: Packet priority In-Reply-To: <200005100824.KAA26303@info.iet.unipi.it> References: <20000510025626515.AAA194@showcase.pdsys.com@dooley> <200005100824.KAA26303@info.iet.unipi.it> X-Mailer: Mew version 1.94.2 on Emacs 20.6 / Mule 4.0 (HANANOEN) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20000510191901V.kjc@csl.sony.co.jp> Date: Wed, 10 May 2000 19:19:01 +0900 From: Kenjiro Cho X-Dispatcher: imput version 20000228(IM140) Lines: 28 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Luigi, > > >What I'm looking to do is some sort of prioritizing of packets for > > >delivery on our FreeBSD routers. What I kindof have in mind is a > > >system that would give non-news traffic a higher priority than news > > >traffic, so that news is the first thing to have it's bandwidth cut. > > > > I think that ALTQ might be what you're looking for: > > > > http://www.csl.sony.co.jp/person/kjc/programs.html > > i _think_ ALTQ uses the tx clock of the card for doing the scheduling. > So unless you have an ATM card (which i have heard has an embedded > shaper supported by ALTQ) or you are directly interfacing with your > T1 via a card whose driver has ALTQ support, you are out of luck > with ALTQ for this particular application. > > Kenjiro, can you confirm this if you are listening ? The drivers supported by ALTQ is listed in the above web page. (A tool to use ATM hardware shapers comes with the ALTQ package but it isn't logically part of ALTQ.) There are several ways to prioritize certain types of traffic using ALTQ. Take a look at CBQ or HFSC for that purpose. -Kenjiro To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 4:35:54 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id 279B837B58D; Wed, 10 May 2000 04:35:47 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (postfix@genius.systems.pavilion.net [212.74.1.100]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id MAA03811; Wed, 10 May 2000 12:35:44 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id D90DD2AD; Wed, 10 May 2000 00:44:09 +0100 (BST) Date: Wed, 10 May 2000 00:44:09 +0100 From: Joe Karthauser To: Mitch Collinsworth Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org, mkc@larryboy.graphics.cornell.edu Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) Message-ID: <20000510004409.A6305@pavilion.net> References: <200005091546.LAA73551@larryboy.graphics.cornell.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200005091546.LAA73551@larryboy.graphics.cornell.edu>; from mkc@Graphics.Cornell.EDU on Tue, May 09, 2000 at 11:46:17AM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, May 09, 2000 at 11:46:17AM -0400, Mitch Collinsworth wrote: > > Has anyone seen anything like this before or have any thoughts what the > > -Mitch Are you sure that it's complaining about inodes? Could it be mbufs? Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 4:36: 4 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id A62B337B69C for ; Wed, 10 May 2000 04:35:58 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (postfix@genius.systems.pavilion.net [212.74.1.100]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id MAA03788; Wed, 10 May 2000 12:35:44 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id 10721304; Wed, 10 May 2000 00:45:09 +0100 (BST) Date: Wed, 10 May 2000 00:45:09 +0100 From: Joe Karthauser To: Brian Reichert Cc: chip@chocobo.cx, freebsd-isp@FreeBSD.ORG Subject: Re: Packet priority Message-ID: <20000510004508.B6305@pavilion.net> References: <20000509144859.A37810@setzer.chocobo.cx> <20000509150325.G17121@numachi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000509150325.G17121@numachi.com>; from reichert@numachi.com on Tue, May 09, 2000 at 03:03:26PM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, May 09, 2000 at 03:03:26PM -0400, Brian Reichert wrote: > On Tue, May 09, 2000 at 02:48:59PM -0400, Chip Marshall wrote: > > What I'm looking to do is some sort of prioritizing of packets for > > delivery on our FreeBSD routers. What I kindof have in mind is a > > system that would give non-news traffic a higher priority than news > > traffic, so that news is the first thing to have it's bandwidth cut. > > Look at dummynet... And/Or altq. Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 7:39:48 2000 Delivered-To: freebsd-isp@freebsd.org Received: from user.nunanet.com (user.nunanet.com [199.247.47.5]) by hub.freebsd.org (Postfix) with ESMTP id 2E6DD37B72C for ; Wed, 10 May 2000 07:39:36 -0700 (PDT) (envelope-from mmason@nunanet.com) Received: from nunanet.com (IDENT:mmason@morrigan.nunanet.com [199.247.47.8]) by user.nunanet.com (8.9.2/8.9.2) with ESMTP id KAA28805 for ; Wed, 10 May 2000 10:39:23 -0400 (EDT) Message-ID: <39197369.766528F2@nunanet.com> Date: Wed, 10 May 2000 09:34:17 -0500 From: Marcel Mason Reply-To: mmason@nunanet.com Organization: Nunanet Worldwide Communications X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.2.12-20 i586) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: Rulesets -vs- performance Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've checked over the discussion regarding rulesets in the sendmail.cf to block certain subject lines and am wondering if the application of rulesets tends to decrease performance of the mail server in general as rulesets get added to. Marcel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 8: 5:49 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id 6F68737B573; Wed, 10 May 2000 08:05:44 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id LAA79173; Wed, 10 May 2000 11:05:30 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101505.LAA79173@larryboy.graphics.cornell.edu> To: Joe Karthauser Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Joe Karthauser of "Wed, 10 May 2000 00:44:09 BST." <20000510004409.A6305@pavilion.net> Date: Wed, 10 May 2000 11:05:30 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Are you sure that it's complaining about inodes? Could it be mbufs? Hmm, I dunno. What does "/var out of inodes" sound like to you? -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 8:17:15 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id C352937B623; Wed, 10 May 2000 08:17:07 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id LAA79256; Wed, 10 May 2000 11:16:59 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101516.LAA79256@larryboy.graphics.cornell.edu> To: Phil Homewood Cc: freebsd-questions@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Phil Homewood of "Wed, 10 May 2000 09:08:01 +1000." <20000510090801.P27852@atlas.bit.net.au> Date: Wed, 10 May 2000 11:16:59 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> Note that /var only has 2% of inodes in use! Hunting through my log >> files I don't find any clues suggesting what happened. > >10 to 1 that you have some process rotating logfiles but not >releasing an open filehandle when it does. Ok, at first glance that sounds like a good guess. But if this was it I would expect to see a more or less linear increase in inode usage over time. I haven't seen that but I've only been spot-checking. It seems like inode usage is more or less the same until the near the critical moment. Thinking back I did manage to catch it once as it was happening a few months ago, but I only had a few minutes to poke around looking for clues before it went belly-up. I'm guessing you're wrong, but I think I'll whip up a cron job to periodically log inode usage anyhow. That should at least help build a better evidence trail for next time. >/usr/ports/sysutils/lsof is your friend :-) Good point. The trick is invoking it at the point when there is actually something to see. Hmm, maybe I can work that into the above cron job. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 8:52:18 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id 30BA837BA21; Wed, 10 May 2000 08:52:08 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id LAA79543; Wed, 10 May 2000 11:51:46 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101551.LAA79543@larryboy.graphics.cornell.edu> To: bart.lateur@skynet.be (Bart Lateur) Cc: freebsd-questions@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from bart.lateur@skynet.be (Bart Lateur) of "Wed, 10 May 2000 15:25:26 GMT." <391a7f52.29122003@relay.skynet.be> Date: Wed, 10 May 2000 11:51:46 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >>What does "/var out of inodes" sound like to you? > >Too many files? Very good. But the real question is where did they come from, and why aren't they still there after rebooting? -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 9: 4:46 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id 3DFA437B70D; Wed, 10 May 2000 09:04:21 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (postfix@genius.systems.pavilion.net [212.74.1.100]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id RAA45704; Wed, 10 May 2000 17:03:55 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id E6AD22AD; Wed, 10 May 2000 17:04:28 +0100 (BST) Date: Wed, 10 May 2000 17:04:28 +0100 From: Joe Karthauser To: Mitch Collinsworth Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) Message-ID: <20000510170428.M21249@pavilion.net> References: <200005101505.LAA79173@larryboy.graphics.cornell.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200005101505.LAA79173@larryboy.graphics.cornell.edu>; from mkc@Graphics.Cornell.EDU on Wed, May 10, 2000 at 11:05:30AM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, May 10, 2000 at 11:05:30AM -0400, Mitch Collinsworth wrote: > > >Are you sure that it's complaining about inodes? Could it be mbufs? > > Hmm, I dunno. What does "/var out of inodes" sound like to you? Ok - :) What have you got that creates lots and lots of little files every now and then, maybe in /var/tmp ? Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 9:37:36 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id C7A6F37B528; Wed, 10 May 2000 09:37:29 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id MAA79845; Wed, 10 May 2000 12:37:26 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101637.MAA79845@larryboy.graphics.cornell.edu> To: Joe Karthauser Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Joe Karthauser of "Wed, 10 May 2000 17:04:28 BST." <20000510170428.M21249@pavilion.net> Date: Wed, 10 May 2000 12:37:26 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >What have you got that creates lots and lots of little files every now >and then, maybe in /var/tmp ? Lots and lots, as in half a million. Excellent question. My original message gave the list of work being done by this machine: >I have a server running 3.0-R that serves DNS, ntp, >NIS, NFS, sendmail, imap, pop, majordomo, DHCP, and syslog. I'm not imagining any of these going to that extreme under normal operation. Maybe sendmail or majordomo if they were under extreme load, but they're not. If they were there would be evidence of that in the logs. I believe it's got to be a failure mode of some sort. Especially since this seems to happen rather suddenly and then all traces are gone after reboot. Seems like a race condition somewhere. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 10:17: 1 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id 92F8137B6A0; Wed, 10 May 2000 10:16:55 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (postfix@genius.systems.pavilion.net [212.74.1.100]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id SAA82264; Wed, 10 May 2000 18:16:54 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id 6F57A304; Wed, 10 May 2000 18:17:37 +0100 (BST) Date: Wed, 10 May 2000 18:17:37 +0100 From: Joe Karthauser To: Mitch Collinsworth Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) Message-ID: <20000510181737.R21249@pavilion.net> References: <200005101637.MAA79845@larryboy.graphics.cornell.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200005101637.MAA79845@larryboy.graphics.cornell.edu>; from mkc@Graphics.Cornell.EDU on Wed, May 10, 2000 at 12:37:26PM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, May 10, 2000 at 12:37:26PM -0400, Mitch Collinsworth wrote: > > >What have you got that creates lots and lots of little files every now > >and then, maybe in /var/tmp ? > > Lots and lots, as in half a million. Excellent question. My original > message gave the list of work being done by this machine: > > >I have a server running 3.0-R that serves DNS, ntp, > >NIS, NFS, sendmail, imap, pop, majordomo, DHCP, and syslog. > > I'm not imagining any of these going to that extreme under normal > operation. Maybe sendmail or majordomo if they were under extreme > load, but they're not. If they were there would be evidence of that > in the logs. I believe it's got to be a failure mode of some sort. > Especially since this seems to happen rather suddenly and then all > traces are gone after reboot. Seems like a race condition somewhere. Yes, but not experienced by anyone else in my knowledge. We were running 3.0-R on live servers with lots of load, (web, mail, and news), and didn't experience this. That's why I suggested temp files. They _would_ disappear after a reboot. BTW are you running soft-updates? Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 10:34:55 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id BDF1C37B851; Wed, 10 May 2000 10:34:48 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id NAA80218; Wed, 10 May 2000 13:34:43 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101734.NAA80218@larryboy.graphics.cornell.edu> To: Joe Karthauser Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Joe Karthauser of "Wed, 10 May 2000 18:17:37 BST." <20000510181737.R21249@pavilion.net> Date: Wed, 10 May 2000 13:34:42 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Yes, but not experienced by anyone else in my knowledge. We were running >3.0-R on live servers with lots of load, (web, mail, and news), and >didn't experience this. Fair enough. That's why I posted the question, to find out if anyone had seen anything like this before. >That's why I suggested temp files. They _would_ disappear after a >reboot. BTW are you running soft-updates? No soft-updates. Haven't gotten past the "thinking about it" stage yet. What I'm thinking is to try it out on the news server first. I'll add a check of /var/tmp to the cron job I'm going to set up to watch and log free inode count over time. Maybe it'll turn up something. All I know right now is there are more inodes free 28 hours after reboot than there were immediately after reboot when only 2% were in use. Anyhow thanks for brain-storming on it. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11: 3:30 2000 Delivered-To: freebsd-isp@freebsd.org Received: from denverweb.net (xenu.denverweb.net [199.45.153.14]) by hub.freebsd.org (Postfix) with ESMTP id A8FD637B856 for ; Wed, 10 May 2000 11:03:26 -0700 (PDT) (envelope-from bminazzi@denverweb.net) Received: from denverweb.net (rc-pm3-3-09.enetis.net [206.31.207.120]) by denverweb.net (8.8.8/8.8.8) with ESMTP id MAA17514 for ; Wed, 10 May 2000 12:06:10 -0600 (MDT) Message-ID: <391997CC.9539284E@denverweb.net> Date: Wed, 10 May 2000 17:09:32 +0000 From: blaine minazzi X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.14 i586) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: ifconfig question. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am upgrading an older freebsd box to FreeBSD 4.0 stable. we will call it foobar.foo.com, and we will set up the ed0 device, #ifconfig ed0 192.1668.1.1 netmask 255.255.255.0 default route is 192.168.1.254 When I do thusly, ifconfig ed0 alias 192.168.1.2 netmask 255.255.255.255 ifconfig ed0 alias 192.168.1.3 netmask 255.255.255.255 ---- snip out the ssdd stuff ------ ifconfig ed0 alias 192.168.1.252 netmask 255.255.255.255 I get the following, at every OTHER invocation of ifconfig. May 9 14:38:14 foobar routed[79] possible netmask problem between ed0:192.168.2.xx and ed0:192.168.1.0/24 ( where xx = every other ip number. ) this message is repeated 3 times. and this message also; May 9 14:38:14 foobar /kernel arp_rtrequest: bad gateway value May 9 14:38:14 foobar last message repeated 17 times May 9 14:39:38 foobar last message repeated 106 times Now, ifconfig shows that the ip's are indead bound to the card, and, I can ping SOME of them, but some give me this error. /kernel: arplookup 192.168.1.143 failed: could not allocate llinfo /kernel: arpresolve: can't allocate llinfo for 192.168.1.143rt then some more of these... /kernel: arp_rtrequest: bad gateway value last message repeated 347 times So... what am I doing wrong here? Would someone please give me the correct magical spell to invoke? I would appreciate knowing the proper way to bind many ip's ( a /24 actually ) to the card, so that when we place this in production, it works correctly. Many thanks in advance. Blaine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11: 5:45 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id CA44637B87C; Wed, 10 May 2000 11:05:37 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (postfix@genius.systems.pavilion.net [212.74.1.100]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id TAA00500; Wed, 10 May 2000 19:05:36 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id 6FF582AD; Wed, 10 May 2000 19:06:19 +0100 (BST) Date: Wed, 10 May 2000 19:06:19 +0100 From: Joe Karthauser To: Mitch Collinsworth Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) Message-ID: <20000510190619.T21249@pavilion.net> References: <200005101734.NAA80218@larryboy.graphics.cornell.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200005101734.NAA80218@larryboy.graphics.cornell.edu>; from mkc@Graphics.Cornell.EDU on Wed, May 10, 2000 at 01:34:42PM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, May 10, 2000 at 01:34:42PM -0400, Mitch Collinsworth wrote: > > What I'm thinking is to try it out on the news server first. > > I'll add a check of /var/tmp to the cron job I'm going to set up to > watch and log free inode count over time. Maybe it'll turn up > something. All I know right now is there are more inodes free 28 hours > after reboot than there were immediately after reboot when only 2% were > in use. > > Anyhow thanks for brain-storming on it. Any reason why you can't move to 3.4-STABLE? Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:14:37 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id 52B6A37B514; Wed, 10 May 2000 11:14:27 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id OAA80523; Wed, 10 May 2000 14:14:25 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005101814.OAA80523@larryboy.graphics.cornell.edu> To: Joe Karthauser Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Joe Karthauser of "Wed, 10 May 2000 19:06:19 BST." <20000510190619.T21249@pavilion.net> Date: Wed, 10 May 2000 14:14:24 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Any reason why you can't move to 3.4-STABLE? Only the little matter of available time. This machine is humming along just fine save for this one annoying problem, which I'm guessing is in one of the applications it's running rather than the OS itself. I've got other servers to install/upgrade that need far more tending to than this one. When things are in order there I'll be back to upgrade this one. I don't generally upgrade all my servers everytime a new release comes out. (Do you?) In fact the ones I'm currently working on are far older than this one. (HP-UX and even one Ultrix.) They're getting complete box replacements with FreeBSD. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:21:12 2000 Delivered-To: freebsd-isp@freebsd.org Received: from colossus.helpfulhacker.com (colossus.helpfulhacker.com [204.251.180.212]) by hub.freebsd.org (Postfix) with ESMTP id 84A5037B986 for ; Wed, 10 May 2000 11:21:07 -0700 (PDT) (envelope-from tmullaney@helpfulhacker.com) Received: from localhost (tmullaney@localhost) by colossus.helpfulhacker.com (8.9.3/8.9.3) with ESMTP id OAA05930 for ; Wed, 10 May 2000 14:26:22 -0400 (EDT) Date: Wed, 10 May 2000 14:26:22 -0400 (EDT) From: Thomas Mullaney To: freebsd-isp@freebsd.org Subject: classless in-addr.arpa Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've have a client with a subnet and he would like to setup classless in-addr.arpa. His upline supports classless in-addr.arpa but doesn't know how to setup my clients end. The netblock the customer will have is 207.77.57.48/28 The forward lookup is done and seems to work fine. It's a 3.4 server that will soon be decommisioned in favor of a 4.0 server. Thanks for the help! -- Thomas Mullaney email: tmullaney@helpfulhacker.com Voice: 978-433-6537 Fax: 978-433-6139 Pager: 978-321-3306 icq: 56202177 Mobile: 978-764-0233 aim: tom11395 ------------------------------------------------------------------------- Integrating People, Ideas and Technology for the 21st Century and Beyond To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:25:52 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail.sullivan-reportlibrary.com (chrtn1UBR2-3-hfc-0252-d8d8b012.rdc1.tn.comcastatwork.com [216.216.176.18]) by hub.freebsd.org (Postfix) with ESMTP id 40D7B37B9E5 for ; Wed, 10 May 2000 11:25:47 -0700 (PDT) (envelope-from marketing@infotechsys.net) Received: from infotechsys.net (2K-SERVER [192.168.0.100]) by mail.sullivan-reportlibrary.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) id KTQY531R; Wed, 10 May 2000 14:22:37 -0400 MIME-Version: 1.0 From: marketing@infotechsys.net Reply-To: marketing@infotechsys.net To: isp@freebsd.org Subject: ITS Brochure Mime-Version: 1.0 Content-Type: text/html; charset="us-ascii" Message-Id: <20000510182547.40D7B37B9E5@hub.freebsd.org> Date: Wed, 10 May 2000 11:25:47 -0700 (PDT) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org ITS Internet Site

P.O. Box 70671

Charleston, SC 29415-0671

843.566.1397


To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:35:17 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hindenburg.eboai.org (hindenburg.eboai.org [205.181.254.190]) by hub.freebsd.org (Postfix) with ESMTP id 6FA4137BB52 for ; Wed, 10 May 2000 11:35:10 -0700 (PDT) (envelope-from chip@chocobo.cx) Received: by hindenburg.eboai.org (Postfix, from userid 1000) id B0DD13D41; Wed, 10 May 2000 14:35:03 -0400 (EDT) Date: Wed, 10 May 2000 14:35:03 -0400 From: Chip Marshall To: Thomas Mullaney Cc: freebsd-isp@freebsd.org Subject: Re: classless in-addr.arpa Message-ID: <20000510143503.A51587@setzer.chocobo.cx> Reply-To: chip@chocobo.cx References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.4i In-Reply-To: ; from tmullaney@helpfulhacker.com on Wed, May 10, 2000 at 02:26:22PM -0400 X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 3.4-RELEASE i386 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On May 10, 2000, Thomas Mullaney sent me the following: > I've have a client with a subnet and he would like to setup classless > in-addr.arpa. His upline supports classless in-addr.arpa but doesn't know > how to setup my clients end. The netblock the customer will have is > 207.77.57.48/28 > > The forward lookup is done and seems to work fine. It's a 3.4 server that > will soon be decommisioned in favor of a 4.0 server. I have to do this on a couple of blocks here, the piece of named.conf that is of interest is just: zone "128-26.254.181.205.IN-ADDR.ARPA" { type master; file "zones/205.181.254.128-26"; } and the zone file looks like (changed domain name for no good reason) @ IN SOA domain.dom. email.domain.dom. ( 124 86400 900 120000 3600 ) IN NS ns1.domain.dom. IN NS ns2.domain.dom. 129 IN PTR name.domain.dom. ... 190 IN PTR lastname.domain.dom. On the server with 205.181.254.0/24, the NS record looks like 128-26 IN NS ns1.domain.dom. 128-26 IN NS ns2.domain.dom. then each address has a 129 IN CNAME 129.128-26.254.1181.205.IN-ADDR.ARPA. line with it. I've found AT&T at least like to use / instead of - in the rev name, so it end up looking like 128/26.254.181.205.IN-ADDR.ARPA instead. -- Chip Marshall http://www.chocobo.cx/chip/ Finger for PGP GCM/CS d+(-) s+:++ a18>? C++ UB++++$ P+++$ L- E--- W++ N+@ o K- w O M+ V-- PS PE Y? PGP++ t+@ 5 X R>+ tv+() b++>+++ DI++++ D(-) G++ e>++ h!>++ r-- y- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:39:53 2000 Delivered-To: freebsd-isp@freebsd.org Received: from richard2.pil.net (richard2.pil.net [207.8.164.9]) by hub.freebsd.org (Postfix) with SMTP id EBA0537B9D2 for ; Wed, 10 May 2000 11:39:46 -0700 (PDT) (envelope-from up@3.am) Received: (qmail 48914 invoked by uid 1825); 10 May 2000 18:39:22 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 10 May 2000 18:39:22 -0000 Date: Wed, 10 May 2000 14:39:22 -0400 (EDT) From: X-Sender: up@richard2.pil.net To: FreeBSD ISP List Subject: gd library woes... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems alot of things I want to run (webalizer, mrtg, etc) need the gd libraries to run. Ok, fine...it doesn't build from ports because it's too old, so I get the source, make, make install with no incidents. I then get the webalizer source (ports out of date again), run ./configure (no errors), then make, and get this: graphs.c: In function `year_graph6x': graphs.c:288: warning: implicit declaration of function `gdImageGif' gcc -L/usr/local/lib -o webalizer webalizer.o graphs.o -lgd -lm graphs.o: In function `year_graph6x': graphs.o(.text+0xce6): undefined reference to `gdImageGif' graphs.o: In function `month_graph6': graphs.o(.text+0x1a4d): undefined reference to `gdImageGif' graphs.o: In function `day_graph3': graphs.o(.text+0x2083): undefined reference to `gdImageGif' graphs.o: In function `pie_chart': graphs.o(.text+0x25fd): undefined reference to `gdImageGif' *** Error code 1 Ok, there's a binary of webalizer for freebsd, I try to run that, and get: su-2.03# ./webalizer /usr/libexec/ld-elf.so.1: Shared object "libgd.so.0" not found So, what am I doing wrong? TIA, James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 11:42:18 2000 Delivered-To: freebsd-isp@freebsd.org Received: from loki.intrepid.net (intrepid.net [204.71.127.3]) by hub.freebsd.org (Postfix) with ESMTP id 9D06A37B902 for ; Wed, 10 May 2000 11:42:14 -0700 (PDT) (envelope-from mark@loki.intrepid.net) Received: (from mark@localhost) by loki.intrepid.net (8.8.5/8.8.5) id OAA29208; Wed, 10 May 2000 14:42:09 -0400 Date: Wed, 10 May 2000 14:42:09 -0400 From: Mark Conway Wirt To: "N.B. DelMore" Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Needed: 95th Percentile Script Message-ID: <20000510144207.C22102@intrepid.net> References: <3.0.6.32.20000509163611.01062ea0@mail.inr.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <3.0.6.32.20000509163611.01062ea0@mail.inr.net>; from mylists@inr.net on Tue, May 09, 2000 at 04:36:11PM -0400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, May 09, 2000 at 04:36:11PM -0400, N.B. DelMore wrote: > Does anyone have, or can anyone point me to, a script that will allow me to > process 95% percentile bandwidth utilization statistics using MRTG? > > Their is a link on the MRTG site for such a script but the link is broken. google turns up: http://www.ee.ethz.ch/~slist/mrtg/msg02225.html Haven't tried it, though... --Mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 15:50:56 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hindenburg.eboai.org (hindenburg.eboai.org [205.181.254.190]) by hub.freebsd.org (Postfix) with ESMTP id 203E937B6DA for ; Wed, 10 May 2000 15:50:54 -0700 (PDT) (envelope-from chip@chocobo.cx) Received: by hindenburg.eboai.org (Postfix, from userid 1000) id EB0EC3D55; Wed, 10 May 2000 18:50:52 -0400 (EDT) Date: Wed, 10 May 2000 18:50:52 -0400 From: Chip Marshall To: freebsd-isp@FreeBSD.ORG Subject: Re: Packet priority Message-ID: <20000510185052.A55147@setzer.chocobo.cx> Reply-To: chip@chocobo.cx References: <20000510025626515.AAA194@showcase.pdsys.com@dooley> <200005100824.KAA26303@info.iet.unipi.it> <20000510191901V.kjc@csl.sony.co.jp> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.4i In-Reply-To: <20000510191901V.kjc@csl.sony.co.jp>; from kjc@csl.sony.co.jp on Wed, May 10, 2000 at 07:19:01PM +0900 X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 3.4-RELEASE i386 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On May 10, 2000, Kenjiro Cho sent me the following: > The drivers supported by ALTQ is listed in the above web page. > (A tool to use ATM hardware shapers comes with the ALTQ package but it > isn't logically part of ALTQ.) I know that ETinc cards arn't on the supported driver list, but is anyone using ALTQ with them? It's currently looking like ALTQ is precisely the sort of thing I'm looking for, but if it doesn't work with our T1's then it isn't all the useful for me. Also, I know that ETinc has it's own bandwidth management software, but my boss isn't really excited to pay $600 for software that is at best equivelent to other free software. -- Chip Marshall http://www.chocobo.cx/chip/ Finger for PGP GCM/CS d+(-) s+:++ a18>? C++ UB++++$ P+++$ L- E--- W++ N+@ o K- w O M+ V-- PS PE Y? PGP++ t+@ 5 X R>+ tv+() b++>+++ DI++++ D(-) G++ e>++ h!>++ r-- y- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 16: 1:35 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail.westbend.net (ns1.westbend.net [209.224.254.131]) by hub.freebsd.org (Postfix) with ESMTP id BFBDB37B6DA for ; Wed, 10 May 2000 16:01:31 -0700 (PDT) (envelope-from hetzels@westbend.net) Received: from admin (admin.westbend.net [209.224.254.141]) by mail.westbend.net (8.9.3/8.9.3) with SMTP id SAA56582; Wed, 10 May 2000 18:01:19 -0500 (CDT) (envelope-from hetzels@westbend.net) Message-ID: <000601bfbad3$a70bd6e0$8dfee0d1@westbend.net> From: "Scot W. Hetzel" To: Cc: References: <20000510025626515.AAA194@showcase.pdsys.com@dooley> <200005100824.KAA26303@info.iet.unipi.it> <20000510191901V.kjc@csl.sony.co.jp> <20000510185052.A55147@setzer.chocobo.cx> Subject: Re: Packet priority Date: Wed, 10 May 2000 18:01:18 -0500 Organization: West Bend Internet MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4029.2901 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4029.2901 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org From: "Chip Marshall" > I know that ETinc cards arn't on the supported driver list, but is > anyone using ALTQ with them? It's currently looking like ALTQ is > precisely the sort of thing I'm looking for, but if it doesn't work > with our T1's then it isn't all the useful for me. Also, I know that > ETinc has it's own bandwidth management software, but my boss isn't > really excited to pay $600 for software that is at best equivelent to > other free software. > As long as you own a ETinc card, you can use their bandwidth management software on that system for free. Now, if you want to use their bandwidth management software on a system without a ETinc card installed, then you have to pay ETinc to use this software on that system. You will also need to provide them with the MAC address of one of the ethernet cards, which they use to create a key to enable the software beyond the 1 hour time out. Scot To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 16:21:24 2000 Delivered-To: freebsd-isp@freebsd.org Received: from hindenburg.eboai.org (hindenburg.eboai.org [205.181.254.190]) by hub.freebsd.org (Postfix) with ESMTP id A61EE37B9E5 for ; Wed, 10 May 2000 16:21:15 -0700 (PDT) (envelope-from chip@chocobo.cx) Received: by hindenburg.eboai.org (Postfix, from userid 1000) id 986183D40; Wed, 10 May 2000 19:21:08 -0400 (EDT) Date: Wed, 10 May 2000 19:21:08 -0400 From: Chip Marshall To: "Scot W. Hetzel" Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Packet priority Message-ID: <20000510192108.A55525@setzer.chocobo.cx> Reply-To: chip@chocobo.cx References: <20000510025626515.AAA194@showcase.pdsys.com@dooley> <200005100824.KAA26303@info.iet.unipi.it> <20000510191901V.kjc@csl.sony.co.jp> <20000510185052.A55147@setzer.chocobo.cx> <000601bfbad3$a70bd6e0$8dfee0d1@westbend.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.4i In-Reply-To: <000601bfbad3$a70bd6e0$8dfee0d1@westbend.net>; from hetzels@westbend.net on Wed, May 10, 2000 at 06:01:18PM -0500 X-URL: http://www.chocobo.cx/chip/ X-OS: FreeBSD 3.4-RELEASE i386 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On May 10, 2000, Scot W. Hetzel sent me the following: > As long as you own a ETinc card, you can use their bandwidth management > software on that system for free. > > Now, if you want to use their bandwidth management software on a system > without a ETinc card installed, then you have to pay ETinc to use this > software on that system. You will also need to provide them with the MAC > address of one of the ethernet cards, which they use to create a key to > enable the software beyond the 1 hour time out. Ah, ok. I was reading the Buying the ET/BWMGR software section of the FAQ, rather than the How Much Does It Cost? section. Nice and clear now. Unfortunatly, my boss is, um... shall we say 'distrustful' of software from ET, since we have had really bad experience with various versions of the driver code in the past. -- Chip Marshall http://www.chocobo.cx/chip/ Finger for PGP GCM/CS d+(-) s+:++ a18>? C++ UB++++$ P+++$ L- E--- W++ N+@ o K- w O M+ V-- PS PE Y? PGP++ t+@ 5 X R>+ tv+() b++>+++ DI++++ D(-) G++ e>++ h!>++ r-- y- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 16:39:16 2000 Delivered-To: freebsd-isp@freebsd.org Received: from velvet.sensation.net.au (serial1-2-velvet-brunswick.sensation.net.au [203.20.114.195]) by hub.freebsd.org (Postfix) with ESMTP id C6E7D37BA00 for ; Wed, 10 May 2000 16:39:05 -0700 (PDT) (envelope-from rowan@sensation.net.au) Received: from localhost (rowan@localhost) by velvet.sensation.net.au (8.9.3/8.9.3) with ESMTP id JAA30809 for ; Thu, 11 May 2000 09:39:00 +1000 (EST) (envelope-from rowan@sensation.net.au) X-Authentication-Warning: velvet.sensation.net.au: rowan owned process doing -bs Date: Thu, 11 May 2000 09:38:57 +1000 (EST) From: Rowan Crowe To: freebsd-isp@freebsd.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: <200005101814.OAA80523@larryboy.graphics.cornell.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 10 May 2000, Mitch Collinsworth wrote: > >Any reason why you can't move to 3.4-STABLE? > > Only the little matter of available time. This machine is humming along > just fine save for this one annoying problem, which I'm guessing is in > one of the applications it's running rather than the OS itself. I've Maybe I'm just being cautious, but I sat on my hands until 3.2-R time... the docs specifically said that it was risky to run 3.0-R on production servers, no? :-) 2.2.8-R is still my favourite for small/dedicated routers, 3.x is just too bloated. Cheers. -- Rowan Crowe http://www.rowan.sensation.net.au/ Sensation Internet Services http://info.sensation.net.au/ Melbourne, Australia Phone: +61-3-9388-9260 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 17:13:21 2000 Delivered-To: freebsd-isp@freebsd.org Received: from larryboy.graphics.cornell.edu (larryboy.graphics.cornell.edu [128.84.247.48]) by hub.freebsd.org (Postfix) with ESMTP id C4AA337BA46 for ; Wed, 10 May 2000 17:13:14 -0700 (PDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Received: from larryboy.graphics.cornell.edu (mkc@localhost) by larryboy.graphics.cornell.edu (8.9.3/8.9.3) with ESMTP id UAA83432; Wed, 10 May 2000 20:12:56 -0400 (EDT) (envelope-from mkc@larryboy.graphics.cornell.edu) Message-Id: <200005110012.UAA83432@larryboy.graphics.cornell.edu> To: Rowan Crowe Cc: freebsd-isp@FreeBSD.ORG Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message from Rowan Crowe of "Thu, 11 May 2000 09:38:57 +1000." Date: Wed, 10 May 2000 20:12:56 -0400 From: Mitch Collinsworth Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> >Any reason why you can't move to 3.4-STABLE? >> >> Only the little matter of available time. This machine is humming along >> just fine save for this one annoying problem, which I'm guessing is in >> one of the applications it's running rather than the OS itself. I've > >Maybe I'm just being cautious, but I sat on my hands until 3.2-R >time... the docs specifically said that it was risky to run 3.0-R on >production servers, no? :-) Sure, but I tested it carefully before going production with it. This machine's been fine for over a year except for this one problem which started maybe in December and has happened less than a dozen times total. The last time before this week was 2 or 3 months ago, so I thought it had disappeared as mysteriously as it began. And again, I'm fairly certain it's a race condition in one of the applications rather than the OS. >2.2.8-R is still my favourite for small/dedicated routers, 3.x is just too >bloated. yah, I'm generally cautious myself, which is why I don't mess with a working machine without a good reason. (If it's not broke, don't break it!) :-) But if bloat is your concern, use custom install and install just the bits you need. Then rebuild the kernel without all the junk you don't need there. And turn off everything you can in inetd. For my mind I'll generally install the latest release when doing a new install, unless there are known problems with it. There are (known) security holes in the older ones. Given that most new server installs (here) are going to last at least 2 years before being replaced, I don't want to start out with old bits with known holes. And fwiw, for routers I prefer routers rather than unix boxes. We've used unix boxes for routers in the past and I found it to be problematic. Other admins couldn't resist the temptation to install other services on them, or install routing on boxes hosting other services, thereby making a single box both a server and a router, which in my book is a major mistake. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 20:44:41 2000 Delivered-To: freebsd-isp@freebsd.org Received: from ren.sasknow.com (ren.sasknow.com [207.195.92.131]) by hub.freebsd.org (Postfix) with ESMTP id A859537BAEF for ; Wed, 10 May 2000 20:44:38 -0700 (PDT) (envelope-from ryan@sasknow.com) Received: from localhost (ryan@localhost) by ren.sasknow.com (8.9.3/8.9.3) with ESMTP id VAA92085 for ; Wed, 10 May 2000 21:45:52 -0600 (CST) (envelope-from ryan@sasknow.com) Date: Wed, 10 May 2000 21:45:52 -0600 (CST) From: Ryan Thompson To: freebsd-isp@freebsd.org Subject: Sendmail relays for individual users Message-ID: Organization: SaskNow Technologies [www.sasknow.com] MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi everybody.. Perhaps a bit off-topic, but I couldn't seem to find help through the standard sendmail channels. I'm running sendmail 8.9.3 on 3.4-STABLE. I have a couple of email users on remote networks who do not have SMTP relay access through their various ISPs. To this point, I have been adding lines like the following to /etc/mail/access to allow them to send mail through our server: user@sasknow.com RELAY ... which "works", but, of course, is a terrible hack which allows spam to come from anyone boasting that address. The hosts behind the users in question do NOT have SMTP relay access on any network, nor do they have static IP addresses/hostnames, or even reasonably small networks to allow relaying from. I am searching for a more elegant and secure solution. (Note, I am not asking for SSL webmail solutions, here :-) Can anyone offer a suggestion? My current setup means I'm pretty much committed to sendmail for now, so a sendmail solution would be the ideal one. If there is way to accomplish this with another mailer, I might run another box with another MTA to handle this small number of users... However, I'd much rather keep things simple. -- Ryan Thompson Systems Administrator, Accounts Phone: +1 (306) 664-1161 SaskNow Technologies http://www.sasknow.com #106-380 3120 8th St E Saskatoon, SK S7H 0W2 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed May 10 22:15: 6 2000 Delivered-To: freebsd-isp@freebsd.org Received: from dastor.albury.net.au (dastor.albury.NET.AU [203.15.244.203]) by hub.freebsd.org (Postfix) with ESMTP id 03C5C37B831 for ; Wed, 10 May 2000 22:14:56 -0700 (PDT) (envelope-from nicks@dastor.albury.net.au) Received: (from nicks@localhost) by dastor.albury.net.au (8.9.3/8.9.3) id PAA40745; Thu, 11 May 2000 15:14:39 +1000 (EST) (envelope-from nicks) Date: Thu, 11 May 2000 15:14:34 +1000 From: Nick Slager To: Ryan Thompson Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Sendmail relays for individual users Message-ID: <20000511151434.A39007@albury.net.au> Mail-Followup-To: Ryan Thompson , freebsd-isp@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from ryan@sasknow.com on Wed, May 10, 2000 at 09:45:52PM -0600 X-Homer: Whoohooooooo! Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Thus spake Ryan Thompson (ryan@sasknow.com): > I'm running sendmail 8.9.3 on 3.4-STABLE. I have a couple of email users > on remote networks who do not have SMTP relay access through their various > ISPs. > [...] > The hosts behind the users in question do NOT have SMTP relay access on > any network, nor do they have static IP addresses/hostnames, or even > reasonably small networks to allow relaying from. > > I am searching for a more elegant and secure solution. (Note, I am not > asking for SSL webmail solutions, here :-) Can anyone offer a suggestion? > My current setup means I'm pretty much committed to sendmail for now, so a > sendmail solution would be the ideal one. If there is way to accomplish > this with another mailer, I might run another box with another MTA to > handle this small number of users... However, I'd much rather keep things > simple. > Do you also run a POP3 server accessible to these users? If so, SMTP after POP auth may be what you're looking for. The remote users will have to check their mail on your POP server first, but after that sendmail can relay messages from their IP for x minutes. http://spam.abuse.net/tools/smPbS.html is a good place to start. Regards, Nick. -- From a Sun Microsystems bug report (#4102680): "Workaround: don't pound on the mouse like a wild monkey." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 0: 4:31 2000 Delivered-To: freebsd-isp@freebsd.org Received: from ns1.cioe.com (ns1.cioe.com [204.120.165.37]) by hub.freebsd.org (Postfix) with ESMTP id 8345037B7FD for ; Thu, 11 May 2000 00:04:26 -0700 (PDT) (envelope-from seames@ns1.cioe.com) Received: (from steve@localhost) by ns1.cioe.com (8.9.3/8.9.3) id CAA12395; Thu, 11 May 2000 02:04:16 -0500 (EST) (envelope-from seames) Date: Thu, 11 May 2000 02:04:16 -0500 From: Steven Ames To: Nick Slager Cc: Ryan Thompson , freebsd-isp@FreeBSD.ORG Subject: Re: Sendmail relays for individual users Message-ID: <20000511020416.A12007@vic.cioe.com> References: <20000511151434.A39007@albury.net.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000511151434.A39007@albury.net.au>; from nicks@albury.net.au on Thu, May 11, 2000 at 03:14:34PM +1000 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org SMTP Auth is a more elegant solution. Install cyrus-sasl from the security ports and then upgrade to sendmail 8.10. I posted a message to this list about 5 weeks back explaining the exact process. A good number of mail clients support SMTP Authentication. I've always found POP before SMTP a bit kludgy. -Steve On Thu, May 11, 2000 at 03:14:34PM +1000, Nick Slager wrote: > Thus spake Ryan Thompson (ryan@sasknow.com): > > > I'm running sendmail 8.9.3 on 3.4-STABLE. I have a couple of email users > > on remote networks who do not have SMTP relay access through their various > > ISPs. > > > > [...] > > > The hosts behind the users in question do NOT have SMTP relay access on > > any network, nor do they have static IP addresses/hostnames, or even > > reasonably small networks to allow relaying from. > > > > I am searching for a more elegant and secure solution. (Note, I am not > > asking for SSL webmail solutions, here :-) Can anyone offer a suggestion? > > My current setup means I'm pretty much committed to sendmail for now, so a > > sendmail solution would be the ideal one. If there is way to accomplish > > this with another mailer, I might run another box with another MTA to > > handle this small number of users... However, I'd much rather keep things > > simple. > > > > Do you also run a POP3 server accessible to these users? If so, SMTP after POP > auth may be what you're looking for. The remote users will have to check their > mail on your POP server first, but after that sendmail can relay messages from > their IP for x minutes. > > http://spam.abuse.net/tools/smPbS.html is a good place to start. > > Regards, > > > Nick. > > -- > From a Sun Microsystems bug report (#4102680): > "Workaround: don't pound on the mouse like a wild monkey." > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 1: 5:15 2000 Delivered-To: freebsd-isp@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [212.74.0.25]) by hub.freebsd.org (Postfix) with ESMTP id 6B12537B9AD; Thu, 11 May 2000 01:05:05 -0700 (PDT) (envelope-from joe@pavilion.net) Received: from genius.systems.pavilion.net (genesis.tao.org.uk [194.242.131.254]) by florence.pavilion.net (8.9.3/8.8.8) with ESMTP id JAA71805; Thu, 11 May 2000 09:04:59 +0100 (BST) (envelope-from joe@pavilion.net) Received: by genius.systems.pavilion.net (Postfix, from userid 100) id 17C7E33F; Thu, 11 May 2000 09:05:38 +0100 (BST) Date: Thu, 11 May 2000 09:05:38 +0100 From: Joe Karthauser To: Mitch Collinsworth Cc: freebsd-questions@FreeBSD.org, freebsd-isp@FreeBSD.org Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) Message-ID: <20000511090538.C28252@pavilion.net> References: <200005101814.OAA80523@larryboy.graphics.cornell.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200005101814.OAA80523@larryboy.graphics.cornell.edu>; from mkc@Graphics.Cornell.EDU on Wed, May 10, 2000 at 02:14:24PM -0400 X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, Lees House, 21-23 Dyke Road, Brighton, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, May 10, 2000 at 02:14:24PM -0400, Mitch Collinsworth wrote: > > >Any reason why you can't move to 3.4-STABLE? > > Only the little matter of available time. This machine is humming along > just fine save for this one annoying problem, which I'm guessing is in > one of the applications it's running rather than the OS itself. I've > got other servers to install/upgrade that need far more tending to than > this one. When things are in order there I'll be back to upgrade this > one. I don't generally upgrade all my servers everytime a new release > comes out. (Do you?) Sometimes, I've been known to be quite radical about this. :) Our web server started as 2.1.5, and sinces has been: 2.1.6, 2.1.7, 2.1.7.1, 2.2.2, 2.2.5, 2.2.6, 2.2.7, 2.2.8, 3.0, 3.1, 3.2, 3.3, and is now 3.4 + i2o subsystem. Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 1:29:16 2000 Delivered-To: freebsd-isp@freebsd.org Received: from www.est.is (eh.est.is [194.144.208.34]) by hub.freebsd.org (Postfix) with ESMTP id B825F37B77B for ; Thu, 11 May 2000 01:29:11 -0700 (PDT) (envelope-from toti@est.is) Received: from est.is (fyr.est.is [194.144.208.39]) by www.est.is (8.9.3/8.9.3) with ESMTP id IAA94200; Thu, 11 May 2000 08:36:40 GMT (envelope-from toti@est.is) Message-ID: <391A70B1.1E9DD5B5@est.is> Date: Thu, 11 May 2000 08:34:57 +0000 From: =?iso-8859-1?Q?=DE=F3r=F0ur=20=CDvarsson?= X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Thomas Mullaney Cc: freebsd-isp@FreeBSD.ORG Subject: Re: classless in-addr.arpa References: Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Does the uplink provider have no other use of this netblock that this customer is holding for now? if yes provider creates ordinary zone file for that zone exept it contains only CNAME records that points to another zone entrys. 1.2.168.192.in-addr.arpa zone contains 1 IN CNAME 1-1.2.168.192.in-addr.arpa ..... 5 IN CNAME 1-1.2.168.192.in-addr.arpa or second solution 1 IN CNAME true.domain.name.at.customer ..... 5 IN CNAME true.domain.name.at.customer if no the provider has to reconfigure all others to the same first the customer creates ordinary zone files, either 1 or 2 files file 1-1.2.168.192.in-addr.arpa contains 1 IN PTR name.true.domain.name.at.customer. ..... 5 IN PTR another-name.true.domain.name.at.customer. and normal zone file for the domain or for one file version 1 IN PTR name.true.domain.name.at.customer. name IN A 192.168.2.1 ..... 5 IN PTR another-name.true.domain.name.at.customer. name IN A 192.168.2.5 that is combined domain name zone file and in-arpa zone file Þórður Thomas Mullaney wrote: > > I've have a client with a subnet and he would like to setup classless > in-addr.arpa. His upline supports classless in-addr.arpa but doesn't know > how to setup my clients end. The netblock the customer will have is > 207.77.57.48/28 > > The forward lookup is done and seems to work fine. It's a 3.4 server that > will soon be decommisioned in favor of a 4.0 server. > > Thanks for the help! > > -- > Thomas Mullaney email: tmullaney@helpfulhacker.com > Voice: 978-433-6537 Fax: 978-433-6139 > Pager: 978-321-3306 icq: 56202177 > Mobile: 978-764-0233 aim: tom11395 > ------------------------------------------------------------------------- > Integrating People, Ideas and Technology for the 21st Century and Beyond > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 6:56:30 2000 Delivered-To: freebsd-isp@freebsd.org Received: from denverweb.net (xenu.denverweb.net [199.45.153.14]) by hub.freebsd.org (Postfix) with ESMTP id A49CE37B9A4 for ; Thu, 11 May 2000 06:56:24 -0700 (PDT) (envelope-from bminazzi@denverweb.net) Received: from denverweb.net (rc-pm3-4-06.enetis.net [206.31.207.165]) by denverweb.net (8.8.8/8.8.8) with ESMTP id HAA17656 for ; Thu, 11 May 2000 07:59:00 -0600 (MDT) Message-ID: <391AAF5E.76466444@denverweb.net> Date: Thu, 11 May 2000 13:02:22 +0000 From: blaine minazzi X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.14 i586) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: Help with ifconfig please. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have posted this to the freebsd-questions, and now this is the second post to freebsd-isp with this question. Surely someone knows tthe answer, and can help here. I have rtfm'ed until my eyes bleed, and searched the newsgroups, mailing lists, etc. When I do as suggested, I get these problems. Here is the previous post. =============================================================== I am upgrading an older freebsd box to FreeBSD 4.0 stable. we will call it foobar.foo.com, and we will set up the ed0 device, #ifconfig ed0 192.1668.1.1 netmask 255.255.255.0 default route is 192.168.1.254 When I do thusly, ifconfig ed0 alias 192.168.1.2 netmask 255.255.255.255 ifconfig ed0 alias 192.168.1.3 netmask 255.255.255.255 ---- snip out the ssdd stuff ------ ifconfig ed0 alias 192.168.1.252 netmask 255.255.255.255 I get the following, at every OTHER invocation of ifconfig. May 9 14:38:14 foobar routed[79] possible netmask problem between ed0:192.168.2.xx and ed0:192.168.1.0/24 ( where xx = every other ip number. ) this message is repeated 3 times. and this message also; May 9 14:38:14 foobar /kernel arp_rtrequest: bad gateway value May 9 14:38:14 foobar last message repeated 17 times May 9 14:39:38 foobar last message repeated 106 times Now, ifconfig shows that the ip's are indead bound to the card, and, I can ping SOME of them, but some give me this error. /kernel: arplookup 192.168.1.143 failed: could not allocate llinfo /kernel: arpresolve: can't allocate llinfo for 192.168.1.143rt then some more of these... /kernel: arp_rtrequest: bad gateway value last message repeated 347 times So... what am I doing wrong here? Would someone please give me the correct magical spell to invoke? I would appreciate knowing the proper way to bind many ip's ( a /24 actually ) to the card, so that when we place this in production, it works correctly. Many thanks in advance. Blaine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 7:20:42 2000 Delivered-To: freebsd-isp@freebsd.org Received: from richard2.pil.net (richard2.pil.net [207.8.164.9]) by hub.freebsd.org (Postfix) with SMTP id D95A737B564 for ; Thu, 11 May 2000 07:20:38 -0700 (PDT) (envelope-from up@3.am) Received: (qmail 39158 invoked by uid 1825); 11 May 2000 14:20:35 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 11 May 2000 14:20:35 -0000 Date: Thu, 11 May 2000 10:20:35 -0400 (EDT) From: X-Sender: up@richard2.pil.net To: blaine minazzi Cc: freebsd-isp@freebsd.org Subject: Re: Help with ifconfig please. In-Reply-To: <391AAF5E.76466444@denverweb.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 11 May 2000, blaine minazzi wrote: > I have posted this to the freebsd-questions, and now this is the second > post to freebsd-isp with this question. > > Surely someone knows tthe answer, and can help here. I have rtfm'ed > until my eyes bleed, and searched the newsgroups, mailing lists, etc. > > When I do as suggested, I get these problems. > > Here is the previous post. > =============================================================== > I am upgrading an older freebsd box to FreeBSD 4.0 stable. > > we will call it foobar.foo.com, and we will set up the ed0 device, > #ifconfig ed0 192.1668.1.1 netmask 255.255.255.0 > > default route is 192.168.1.254 > > When I do thusly, > > ifconfig ed0 alias 192.168.1.2 netmask 255.255.255.255 > ifconfig ed0 alias 192.168.1.3 netmask 255.255.255.255 > ---- snip out the ssdd stuff ------ > ifconfig ed0 alias 192.168.1.252 netmask 255.255.255.255 The netmask should be 255.255.255.0 > I get the following, at every OTHER invocation of ifconfig. > > May 9 14:38:14 foobar routed[79] possible netmask problem between > ed0:192.168.2.xx and ed0:192.168.1.0/24 ( where xx = every other ip > number. ) this message is repeated 3 times. > > > and this message also; > > May 9 14:38:14 foobar /kernel arp_rtrequest: bad gateway value > May 9 14:38:14 foobar last message repeated 17 times > May 9 14:39:38 foobar last message repeated 106 times > > Now, ifconfig shows that the ip's are indead bound to the card, and, I > can ping SOME of them, but some give me this error. > > /kernel: arplookup 192.168.1.143 failed: could not allocate llinfo > /kernel: arpresolve: can't allocate llinfo for 192.168.1.143rt > > then some more of these... > > /kernel: arp_rtrequest: bad gateway value > last message repeated 347 times > > > > So... what am I doing wrong here? > > Would someone please give me the correct magical spell to invoke? > > I would appreciate knowing the proper way to bind many ip's ( a /24 > actually ) to the card, so that when we place this in production, it > works correctly. > > Many thanks in advance. > > Blaine > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 7:28:17 2000 Delivered-To: freebsd-isp@freebsd.org Received: from metva.com.au (metva.metva.com.au [202.0.82.1]) by hub.freebsd.org (Postfix) with ESMTP id A2F9737B9D2 for ; Thu, 11 May 2000 07:28:11 -0700 (PDT) (envelope-from enno.davids@metva.com.au) Received: (from enno@localhost) by metva.com.au id AAA09386; Fri, 12 May 2000 00:27:28 +1000 (EST) From: Enno Davids Message-Id: <200005111427.AAA09386@metva.com.au> Subject: Re: gd library woes... In-Reply-To: from "up@3.am" at "May 10, 0 02:39:22 pm" To: up@3.am Date: Fri, 12 May 2000 00:27:27 +1000 (EST) Cc: freebsd-isp@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org | up@richard2.pil.net wrote: | It seems alot of things I want to run (webalizer, mrtg, etc) need the gd | libraries to run. Ok, fine...it doesn't build from ports because it's too | old, so I get the source, make, make install with no incidents. | | graphs.o: In function `pie_chart': | graphs.o(.text+0x25fd): undefined reference to `gdImageGif' | *** Error code 1 .... | So, what am I doing wrong? The problem here is that GD has over time evolved a little. Specifically, early versions of GD used the GIF format for the graphic they were generating. As GIF is encumbered by patents though, GD has dropped support in favour of supporting PNG (and more recently JPG I believe). So, in general you need to make sure the app you're trying to run has a version of GD with the relevant interface. So, old versions of webalizer need old versions of GD and new versions of webalizer use more recent versions of GD for instance. Only matched APIs will 'mate' correctly. Enno. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 8: 6:55 2000 Delivered-To: freebsd-isp@freebsd.org Received: from rly-ip02.mx.aol.com (rly-ip02.mx.aol.com [152.163.225.160]) by hub.freebsd.org (Postfix) with ESMTP id AC2E637BB4C for ; Thu, 11 May 2000 08:06:43 -0700 (PDT) (envelope-from war-zone@uk2.net) Received: from tot-th.proxy.aol.com (tot-th.proxy.aol.com [152.163.213.1]) by rly-ip02.mx.aol.com (8.8.8/8.8.8/AOL-5.0.0) with ESMTP id LAA29103; Thu, 11 May 2000 11:06:35 -0400 (EDT) Received: from galaxy (98CFA1DF.ipt.aol.com [152.207.161.223]) by tot-th.proxy.aol.com (8.10.0/8.10.0) with SMTP id e4BF6X713039; Thu, 11 May 2000 11:06:33 -0400 (EDT) Message-ID: <000301bfbb5a$8fdadfc0$dfa1cf98@galaxy> From: "Stone" To: "Ryan Thompson" , References: Subject: Re: Sendmail relays for individual users Date: Thu, 11 May 2000 09:42:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 X-Apparently-From: Stonefrozen@aol.com Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org ----- Original Message ----- From: "Ryan Thompson" To: Sent: Thursday, May 11, 2000 4:45 AM Subject: Sendmail relays for individual users > > user@sasknow.com RELAY > > ... which "works", but, of course, is a terrible hack which allows spam to > come from anyone boasting that address. > > The hosts behind the users in question do NOT have SMTP relay access on > any network, nor do they have static IP addresses/hostnames, or even > reasonably small networks to allow relaying from. > > I am searching for a more elegant and secure solution. (Note, I am not > asking for SSL webmail solutions, here :-) Can anyone offer a suggestion? > My current setup means I'm pretty much committed to sendmail for now, so a > sendmail solution would be the ideal one. If there is way to accomplish > this with another mailer, I might run another box with another MTA to > handle this small number of users... However, I'd much rather keep things > simple. > I`m not familiar with sendmail so I`m not sure, I use qmail for my mail server here, om the plig.qmail.org web page there are some details of allowing a host to relay after it has autheticated with the pop3 server. Hope this helps! Chris - Neotrix.net & Powershells.net System Administrator To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 8:28:54 2000 Delivered-To: freebsd-isp@freebsd.org Received: from richard2.pil.net (richard2.pil.net [207.8.164.9]) by hub.freebsd.org (Postfix) with SMTP id 0FC9737B887 for ; Thu, 11 May 2000 08:28:47 -0700 (PDT) (envelope-from up@3.am) Received: (qmail 49245 invoked by uid 1825); 11 May 2000 15:28:44 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 11 May 2000 15:28:44 -0000 Date: Thu, 11 May 2000 11:28:44 -0400 (EDT) From: X-Sender: up@richard2.pil.net To: Enno Davids Cc: freebsd-isp@FreeBSD.ORG Subject: Re: gd library woes... In-Reply-To: <200005111427.AAA09386@metva.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, 12 May 2000, Enno Davids wrote: > | up@richard2.pil.net wrote: > | It seems alot of things I want to run (webalizer, mrtg, etc) need the gd > | libraries to run. Ok, fine...it doesn't build from ports because it's too > | old, so I get the source, make, make install with no incidents. > | > | graphs.o: In function `pie_chart': > | graphs.o(.text+0x25fd): undefined reference to `gdImageGif' > | *** Error code 1 > > .... > > | So, what am I doing wrong? > > The problem here is that GD has over time evolved a little. Specifically, > early versions of GD used the GIF format for the graphic they were > generating. As GIF is encumbered by patents though, GD has dropped support > in favour of supporting PNG (and more recently JPG I believe). > > So, in general you need to make sure the app you're trying to run has a > version of GD with the relevant interface. So, old versions of webalizer need > old versions of GD and new versions of webalizer use more recent versions of > GD for instance. Only matched APIs will 'mate' correctly. Ok, I tried installing the new, PNG-friendly version of webalizer, and now I get this: gcc -L/usr/local/include -o webalizer webalizer.o graphs.o -lgd -lz -lm graphs.o: In function `year_graph6x': graphs.o(.text+0xce6): undefined reference to `gdImagePng' graphs.o: In function `month_graph6': graphs.o(.text+0x1a4d): undefined reference to `gdImagePng' graphs.o: In function `day_graph3': graphs.o(.text+0x2083): undefined reference to `gdImagePng' graphs.o: In function `pie_chart': graphs.o(.text+0x25fd): undefined reference to `gdImagePng' *** Error code 1 Stop. Damn, it appears to be looking in the correct place for the header files, etc, but it just ain't working... James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 8:44:51 2000 Delivered-To: freebsd-isp@freebsd.org Received: from daedal.oneway.com (daedal.oneway.com [205.252.89.49]) by hub.freebsd.org (Postfix) with ESMTP id E51C837B5F9 for ; Thu, 11 May 2000 08:44:48 -0700 (PDT) (envelope-from jay@oneway.com) Received: from oneway.com (localhost.oneway.com [127.0.0.1]) by daedal.oneway.com (8.9.3/8.9.1) with SMTP id LAA27090 for freebsd-isp@FreeBSD.ORG; Thu, 11 May 2000 11:38:05 -0400 (EDT) (envelope-from jay@oneway.com) Message-Id: <200005111538.LAA27090@daedal.oneway.com> Date: Thu, 11 May 2000 15:38:05 -0000 To: freebsd-isp@FreeBSD.ORG Subject: Web-based email program for large installation From: X-Mailer: TWIG 2.2.3 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, Does anyone know of a good web-based email application that can handle many many users (starting with 20,000 and up to millions?) I've looked at a couple and would love to hear some input. We would probably run it on several servers... Doesn't have to be free, but open source would be preferred... I've looked at IMP, TWIG, VisualMail... the current favorite is TWIG, can anyone offer testimonials on these? Thanks alot, Jay To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 9:34:25 2000 Delivered-To: freebsd-isp@freebsd.org Received: from richard2.pil.net (richard2.pil.net [207.8.164.9]) by hub.freebsd.org (Postfix) with SMTP id F2AAC37B574 for ; Thu, 11 May 2000 09:34:21 -0700 (PDT) (envelope-from up@3.am) Received: (qmail 57890 invoked by uid 1825); 11 May 2000 16:34:19 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 11 May 2000 16:34:19 -0000 Date: Thu, 11 May 2000 12:34:19 -0400 (EDT) From: X-Sender: up@richard2.pil.net To: "Carlos M. Gutierrez" Cc: FreeBSD ISP List Subject: Re: gd library woes... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org disregard previous email. Out of frustration, I had installed an older "gif friendly" version of gd, and then a later png version. It appears the header files were for the former, and I was then trying to build the new png version of webalizer . Dunno why that didn't find the png headers, but I just reinstalled the gif version of webalizer with the flags you suggested, and it worked. On Thu, 11 May 2000, Carlos M. Gutierrez wrote: > > > On Thu, 11 May 2000 up@3.am wrote: > > > gcc -L/usr/local/include -o webalizer webalizer.o graphs.o -lgd -lz -lm > > Just a wild guess, but perhaps you need a: > > -L/usr/local/lib > > and need to change -L/usr/local/include to -I/usr/local/include > > where is libgd installed? can the compiler find it there? > > cheers, > > Carlos M. Gutierrez > carlos@gutierrez.com > > -- > > WEPA! Search Puerto Rico! o 2,500+ Web Sites > http://www.wepa.com o 500+ Channels > o 30,000+ Pages Indexed > Puerto Rico's Internet Portal o Chat > ...since 1996 o Discussion Forums > o Free E-Mail > o Local News > > > graphs.o: In function `year_graph6x': > > graphs.o(.text+0xce6): undefined reference to `gdImagePng' > > graphs.o: In function `month_graph6': > > graphs.o(.text+0x1a4d): undefined reference to `gdImagePng' > > graphs.o: In function `day_graph3': > > graphs.o(.text+0x2083): undefined reference to `gdImagePng' > > graphs.o: In function `pie_chart': > > graphs.o(.text+0x25fd): undefined reference to `gdImagePng' > > *** Error code 1 > > > > Stop. > > > > Damn, it appears to be looking in the correct place for the header files, > > etc, but it just ain't working... > > > > James Smallacombe PlantageNet, Inc. CEO and Janitor > > up@3.am http://3.am > > ========================================================================= > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-isp" in the body of the message > > > > James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 15: 0:22 2000 Delivered-To: freebsd-isp@freebsd.org Received: from pop.idx.com.au (pop.idx.com.au [203.14.30.10]) by hub.freebsd.org (Postfix) with ESMTP id EFFB637B6FF for ; Thu, 11 May 2000 15:00:09 -0700 (PDT) (envelope-from dannyh@idx.com.au) Received: from freebsd.freebsd.org (tntwc01-3-244.idx.com.au [203.166.3.244]) by pop.idx.com.au (8.9.3/8.9.3) with SMTP id HAA16909; Fri, 12 May 2000 07:59:29 +1000 From: Danny To: , freebsd-isp@FreeBSD.ORG Subject: Re: Web-based email program for large installation Date: Sat, 13 May 2000 08:03:11 +1000 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: <200005111538.LAA27090@daedal.oneway.com> MIME-Version: 1.0 Message-Id: <00051308060701.00342@freebsd.freebsd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Yes I heard of TWIG (sort of a groupware) program written in php3. From personal experience I believe atdot from www.atdot.org is so much easier to setup. All you need is a seperate box running FreeBSD, Apache etc etc then some understnading of PERL then your job is done. On Fri, 12 May 2000, jay@oneway.com wrote: > Hello, > > Does anyone know of a good web-based email application that can handle many > many users (starting with 20,000 and up to millions?) I've looked at a couple > and would love to hear some input. We would probably run it on several > servers... Doesn't have to be free, but open source would be preferred... > > I've looked at IMP, TWIG, VisualMail... the current favorite is TWIG, can > anyone offer testimonials on these? > > Thanks alot, > > Jay > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 15:14:38 2000 Delivered-To: freebsd-isp@freebsd.org Received: from vyrus.net (vyrus.net [207.246.130.43]) by hub.freebsd.org (Postfix) with ESMTP id 054CD37BC0C for ; Thu, 11 May 2000 15:14:36 -0700 (PDT) (envelope-from phill@freebsd.org) Received: from localhost (phill@localhost) by vyrus.net (8.9.3/8.9.3) with ESMTP id PAA14537 for ; Thu, 11 May 2000 15:14:44 -0700 (PDT) (envelope-from phill@freebsd.org) X-Authentication-Warning: vyrus.net: phill owned process doing -bs Date: Thu, 11 May 2000 15:14:44 -0700 (PDT) From: Phillip Salzman X-Sender: phill@vyrus.net To: freebsd-isp@freebsd.org Subject: Shasta SSG-5000 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Has anyone had experience with the Nortel Networks Shasta SSG 5000? I'm just wondering how it matches up to the Cisco 6400 (hmm), Springtide, or another device. Any input would be greatly appriciated. TIA --- Phillip Salzman To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 16:15:26 2000 Delivered-To: freebsd-isp@freebsd.org Received: from web1.allunix.com (17.93.rsvl.dsl.quiknet.com [207.231.93.17]) by hub.freebsd.org (Postfix) with ESMTP id 6AD7937BC34 for ; Thu, 11 May 2000 16:15:23 -0700 (PDT) (envelope-from david@allunix.com) Received: from DELL (dell.allunix.com [192.168.3.7]) by web1.allunix.com (8.9.3/8.9.3) with ESMTP id QAA05347; Thu, 11 May 2000 16:21:21 -0700 (PDT) (envelope-from david@allunix.com) Message-ID: <200005111629350550.07767A68@web1.allunix.com> In-Reply-To: <00051308060701.00342@freebsd.freebsd.org> References: <200005111538.LAA27090@daedal.oneway.com> <00051308060701.00342@freebsd.freebsd.org> X-Mailer: Calypso Version 3.10.03.02 (3) Date: Thu, 11 May 2000 16:29:35 -0700 From: "David W. DeTinne" To: "Danny" Cc: freebsd-isp@freebsd.org Subject: Re: Web-based email program for large installation Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Atdot is a ripoff of acmemail? My favorite is imp at horde.org. I have tried them all only to find that imp is the best product. David DeTinne *********** REPLY SEPARATOR *********** On 5/13/00 at 8:03 AM Danny wrote: >Yes I heard of TWIG (sort of a groupware) program written in php3. From >personal experience I believe atdot from www.atdot.org is so much easier to >setup. All you need is a seperate box running FreeBSD, Apache etc etc then some >understnading of PERL then your job is done. > >On Fri, 12 May 2000, jay@oneway.com wrote: >> Hello, >> >> Does anyone know of a good web-based email application that can handle many >> many users (starting with 20,000 and up to millions?) I've looked at a couple >> and would love to hear some input. We would probably run it on several >> servers... Doesn't have to be free, but open source would be preferred... >> >> I've looked at IMP, TWIG, VisualMail... the current favorite is TWIG, can >> anyone offer testimonials on these? >> >> Thanks alot, >> >> Jay >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-isp" in the body of the message >-- > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 16:54:54 2000 Delivered-To: freebsd-isp@freebsd.org Received: from vcnet.com (mail.vcnet.com [209.239.239.15]) by hub.freebsd.org (Postfix) with SMTP id CCF1037BC41 for ; Thu, 11 May 2000 16:54:52 -0700 (PDT) (envelope-from jpr@vcnet.com) Received: (qmail 65745 invoked from network); 11 May 2000 23:54:51 -0000 Received: from joff.vc.net (HELO ?209.239.239.22?) (209.239.239.22) by mail.vcnet.com with SMTP; 11 May 2000 23:54:51 -0000 Mime-Version: 1.0 Message-Id: In-Reply-To: <20000510144207.C22102@intrepid.net> References: <3.0.6.32.20000509163611.01062ea0@mail.inr.net> <20000510144207.C22102@intrepid.net> Date: Thu, 11 May 2000 16:54:53 -0700 To: Mark Conway Wirt , "N.B. DelMore" From: Jon Rust Subject: Re: Needed: 95th Percentile Script Cc: freebsd-isp@FreeBSD.ORG Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I use MRTG+rrd and 14all.cgi. Much less processing power required for basically the same result. Anyway, if you change over to MRTG+rrd you could try my perl script. You run it once a day for each target. It grabs all the data points for the day, merges them witht he prvious top 5%+1 for the month, resorts, and keeps the top 5%+1 for the next time. Optionally, it will email the results to you. http://www.vcnet.com/~jon/extract95.txt jon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu May 11 18:29:25 2000 Delivered-To: freebsd-isp@freebsd.org Received: from publica.ub.mng.net (publica.ub.mng.net [202.179.0.80]) by hub.freebsd.org (Postfix) with ESMTP id B2BE837B620 for ; Thu, 11 May 2000 18:29:11 -0700 (PDT) (envelope-from balgaa@publica.ub.mng.net) Received: from localhost (balgaa@localhost) by publica.ub.mng.net (8.10.0/8.10.0) with ESMTP id e4CHN8524205; Fri, 12 May 2000 09:23:08 -0800 (GMT) Date: Fri, 12 May 2000 09:23:08 -0800 (GMT) From: Balgansuren To: "David W. DeTinne" Cc: Danny , freebsd-isp@FreeBSD.ORG Subject: Re: Web-based email program for large installation In-Reply-To: <200005111629350550.07767A68@web1.allunix.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, Could you check www.webbasedemail.com Balgaa On Thu, 11 May 2000, David W. DeTinne wrote: > Atdot is a ripoff of acmemail? > > My favorite is imp at horde.org. I have tried them all only to find that > imp is the best > product. > > > David DeTinne > > *********** REPLY SEPARATOR *********** > > On 5/13/00 at 8:03 AM Danny wrote: > > >Yes I heard of TWIG (sort of a groupware) program written in php3. From > >personal experience I believe atdot from www.atdot.org is so much easier > to > >setup. All you need is a seperate box running FreeBSD, Apache etc etc then > some > >understnading of PERL then your job is done. > > > >On Fri, 12 May 2000, jay@oneway.com wrote: > >> Hello, > >> > >> Does anyone know of a good web-based email application that can handle > many > >> many users (starting with 20,000 and up to millions?) I've looked at a > couple > >> and would love to hear some input. We would probably run it on several > >> servers... Doesn't have to be free, but open source would be > preferred... > >> > >> I've looked at IMP, TWIG, VisualMail... the current favorite is TWIG, > can > >> anyone offer testimonials on these? > >> > >> Thanks alot, > >> > >> Jay > >> > >> > >> To Unsubscribe: send mail to majordomo@FreeBSD.org > >> with "unsubscribe freebsd-isp" in the body of the message > >-- > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-isp" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri May 12 1:48:16 2000 Delivered-To: freebsd-isp@freebsd.org Received: from velvet.sensation.net.au (serial1-2-velvet-brunswick.sensation.net.au [203.20.114.195]) by hub.freebsd.org (Postfix) with ESMTP id 2E4D137BF61 for ; Fri, 12 May 2000 01:48:06 -0700 (PDT) (envelope-from rowan@sensation.net.au) Received: from localhost (rowan@localhost) by velvet.sensation.net.au (8.9.3/8.9.3) with ESMTP id SAA39010 for ; Fri, 12 May 2000 18:48:04 +1000 (EST) (envelope-from rowan@sensation.net.au) X-Authentication-Warning: velvet.sensation.net.au: rowan owned process doing -bs Date: Fri, 12 May 2000 18:48:03 +1000 (EST) From: Rowan Crowe To: freebsd-isp@freebsd.org Subject: tcpdump - memory leak? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, Any ideas on why the memory that tcpdump uses seems to rise over time? A memory leak perhaps? I have a process that tracks link utilisation and sends real time data to another host for graphing, and it uses tcpdump for this. Here's what 'top' shows: Mem: 11M Active, 1628K Inact, 5136K Wired, 536K Cache, 2516K Buf, 4544K Free ... 6991 root 28 0 2904K 2820K RUN 104:29 0.04% 0.04% tcpdump And after I kill and restart it: Mem: 6068K Active, 1628K Inact, 5064K Wired, 536K Cache, 2544K Buf, 9584K Free ... 17609 root 4 0 900K 720K bpf 0:00 0.42% 0.27% tcpdump Approximately 2 hours later, not sure if it's "rising" or just happens to be using a bit more memory at this instant: 17609 root 4 0 984K 900K bpf 0:22 0.00% 0.00% tcpdump The machine it runs on has an MFS file system with no swap, and it occasionally reboots for no reason with no apparent ill after effects. I am guessing it's because it runs out of available memory, and I think I've just discovered why... Any ideas appreciated. Cheers. -- Rowan Crowe http://www.rowan.sensation.net.au/ Sensation Internet Services http://info.sensation.net.au/ Melbourne, Australia Phone: +61-3-9388-9260 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri May 12 5:23:50 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail1.bna.bellsouth.net (mail1.bna.bellsouth.net [205.152.150.13]) by hub.freebsd.org (Postfix) with ESMTP id 92BE037BD79; Fri, 12 May 2000 05:23:44 -0700 (PDT) (envelope-from jim@siteplus.net) Received: from discover.siteplus.net (host-209-214-41-113.cha.bellsouth.net [209.214.41.113]) by mail1.bna.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id IAA08592; Fri, 12 May 2000 08:23:41 -0400 (EDT) Date: Fri, 12 May 2000 08:23:44 -0400 (EDT) From: Jim Weeks To: freebsd-questions@FreeBSD.ORG Cc: freebsd-isp@FreeBSD.ORG Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: <20000511090538.C28252@pavilion.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org A little delayed reaction but something I have been thinking about for a while. The idea has been kicked around that 32mb for / and 20mb for /var is a little outdated. Not only in this thread but previously. I have had machines from 2.2.6-4.0-stable that plow happily along under these constraint. The only time I ever had a problem was with a 3.2 machine and a botched backup script that duplicated and reduplicated files each day until the locate database bloated beyond the /var limit, but I digress, or tell on myself ;-) The point is that I do feel it is silly to keep them so small in the days of multi gig drives, which brings me to ask. In the days of 500mb to 1gig of Ram is the idea of doubling that in swap space still a good practice? I realize that opinions are like posteriors, but I would like to hear some. Jim Weeks ---------- A mind is a terrible thing to loose! How I miss mine.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri May 12 5:28:44 2000 Delivered-To: freebsd-isp@freebsd.org Received: from epsilon.lucida.qc.ca (epsilon.lucida.qc.ca [216.95.146.6]) by hub.freebsd.org (Postfix) with SMTP id 66F1237BD62 for ; Fri, 12 May 2000 05:28:40 -0700 (PDT) (envelope-from matt@ARPA.MAIL.NET) Received: (qmail 461 invoked by uid 1000); 12 May 2000 12:28:38 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 12 May 2000 12:28:38 -0000 Date: Fri, 12 May 2000 08:28:36 -0400 (EDT) From: Matt Heckaman X-Sender: matt@epsilon.lucida.qc.ca To: Jim Weeks Cc: freebsd-questions@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: 3.0-R server /var running out of inodes (not a usenet question) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Spam-Rating: localhost 1.6.2 0/1000/N Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Fri, 12 May 2000, Jim Weeks wrote: [...] : The point is that I do feel it is silly to keep them so small in the days : of multi gig drives, which brings me to ask. In the days of 500mb to 1gig : of Ram is the idea of doubling that in swap space still a good practice? I personally double swap up to 512M for a GB of swap space. Once the RAM gets over 512M I just leave the swap at a GB, works well for me. It's just a personal opinion. : Jim Weeks Matt Heckaman matt@arpa.mail.net http://www.lucida.qc.ca -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.1 (FreeBSD) Comment: http://www.lucida.qc.ca/pgp iD8DBQE5G/j2dMMtMcA1U5ARArZ3AKCkUk5Elyr5wipcGuKKb32pA1Pc7wCeNDoe X5T1zgjaP2/uQiuYTczOOQI= =XiXX -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri May 12 8: 0:27 2000 Delivered-To: freebsd-isp@freebsd.org Received: from shell.telemere.net (shell.telemere.net [63.224.9.3]) by hub.freebsd.org (Postfix) with ESMTP id 168FB37BDCD for ; Fri, 12 May 2000 08:00:19 -0700 (PDT) (envelope-from visigoth@telemere.net) Received: by shell.telemere.net (Postfix, from userid 1001) id 5A43070602; Fri, 12 May 2000 09:59:21 -0500 (CDT) Received: from localhost (localhost [127.0.0.1]) by shell.telemere.net (Postfix) with ESMTP id 564AC6C804; Fri, 12 May 2000 09:59:21 -0500 (CDT) Date: Fri, 12 May 2000 09:59:21 -0500 (CDT) From: Visigoth To: "N.B. DelMore" Cc: freebsd-isp@freebsd.org Subject: Re: Needed: 95th Percentile Script In-Reply-To: <3.0.6.32.20000509163611.01062ea0@mail.inr.net> Message-ID: MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-789027289-958143561=:26270" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-789027289-958143561=:26270 Content-Type: TEXT/PLAIN; charset=US-ASCII Greetings, did you find what you needed? If not, I humbly present mrtglog1.1 a small c program I wrote for parsing mrtg logs and calculating the 95th percentile of usage for the last month. You should be able to just un tar/gz it and type make. the usage is ./mrtglog and it prints out a line with the in and out and total 95th percentile. It is meant to be used by something that will e-mail out the results, but I don't have that anymore ;) if you just want to use it to calculate the results it should work fine tho... If not, please tell me and I would be happy to fix it... Planning on doing a little more work on it and then submitting it as a (small but useful) port ;) Flames/Praise accepted gladly Visigoth Damieon Stark Sr. Unix Systems Administrator visigoth@telemere.net ____________________________________________________________________________ | - M$ Win 2K was built for the internet. | - Unix _BUILT_ the internet. | FreeBSD - The POWER to serve | http://www.freebsd.org your call... | | ---------------------------------------------------------------------------- --0-789027289-958143561=:26270 Content-Type: APPLICATION/octet-stream; name="mrtglog1.1.tar.gz" Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: Content-Disposition: attachment; filename="mrtglog1.1.tar.gz" H4sICBMbHDkAA21ydGdsb2cxLjEudGFyAO1YW2+jRhTOK/MrTp1uOjiOAxhw YseRtlIrbZXdPGyiVkqiiuABo8XgwuBNtcp/79zAOMbtuk1SVeU82DNzbt+Z c+bGPKNhnIZm3zzeeykC2xg6DuwBmEPHrP+XZAAMTWNomM7Adhnbch17D5wX Q1SjIqdeBrC3jPIoTOlsm9xf8f+jNF/lXzX7/nP7MA2Wf2Nr/h3DNVn+Dcu0 bMMwBoxtO465B8ZzA2mi/3n+96PEj4spgbOcTqO0PztHa0NxdL8+NvfojI+g /SkJooTA+7e/sAV+6qJlGk2BZNmv+e859tMkp+DPvKyrjxHKaVb4FHiJwRdU JGwuEzKFOE1CiBIKNJqT8ZNxbxklm2NpQZ8OcgNz72FTWjGEymMNBQlzhmKa FvcxUW6qTiUslaMEMG95Wej3RDzQ7bLOUkdfEEK8fjnbT4uE6fFuPVQ6i/Ib c3Di3K3zOIDPafYpSsI6+8d3Fz9AN5iasiu8ZcSb3hfBDZtmJRXEqUfhQXYU bprSKOmxXwa/5y0J67Bf3smnhAUo/nj3PgqZ1FghDwDzwOCbCVg6m5JyP15k LKgAd65zLyQjUDsDnAVRTM5vk44+rkTJQ0SxWRt4RGhlHbNgYAJBuiCJ8LW8 Me960Mk6ug6TCXy4vrjQAWll2XSEJNZZ2LTIWCJHpS9lNAgJzQGrWenx6usB c8KLTAqkGWCZD+bYGKvm2QTYRNuqe3jIo9WCIC7yGZbqWpD7XhLwXq/zJp52 egcifULhrs8rVEjtoMNLa3cdlqZdlUT1/w0l5epx/DVzB9XkgZi9soBrwTIt jOEEurAxDXAMWBarbhr2iTN0uecNGwzRNiMcbLOVXfEL+Lw8K75rGGKQWxFr CQ4n0BDguBLhQJtkxP6hqYVQc3LOfcDBQYmJXXKafOKmWe2CCHPd86YkZ3Qr ySfuJ7s5tOyv9rgSfUQaT4amlqLYh3g2pbNjOHGdU7Wc5e6kmLxVcXdexTxI qGcSqijl5sexL9LPuDHUIwlT75V1ZZXRqC1zuzZnHslAGtRZUdahNea/CSne Beoq3TW0WywIuLCJt1YyTyBPngnkqkL+Acpamal/ufBRDRmzWjZXGwWrqxNV daX7Uk4W3hZBYS//LaNY9jZsVDy5ja7jkMV/CNjqKvVNDGoRVELcjpKS5zQX qqYM1mCUR/RtcurQGSxI5pOEsvMZ0gAKfm5DlI9uk1v67sMI3vTtOIDL66uy eXV5NRItdpo33xGqE1UexYANNvKI/u0La0vPSrX333vvE+EXvGf3wd5/rm1v f/9b1nD1/h8Y/P03cAft++81aB/KtIsz9yMlS/JdXt34F1kaZt683++jy+9/ +jgp33f9tBTppwip5gjgW8zFdKSFvg9HP3txDEeVaMmFo3iOkB8TLxkhLZtD lxthsiNNSba7zGtRbf2XqX3t7z9gmbb6/jMYukP5/ce12vX/GvSn339YRSRi CG39uANzkuf8goi01Y0E3iZclu0nMy+H1PeLjL3k5XcDbSE4WOixbvX9oL1a tNRSSy211FJLLbXUUksttdRSSy29BP0BKBAG7gAoAAA= --0-789027289-958143561=:26270-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sat May 13 14:34:59 2000 Delivered-To: freebsd-isp@freebsd.org Received: from juice.shallow.net (node16229.a2000.nl [24.132.98.41]) by hub.freebsd.org (Postfix) with ESMTP id 66DFF37BB2F for ; Sat, 13 May 2000 14:34:56 -0700 (PDT) (envelope-from joshua@roughtrade.net) Received: from localhost (joshua@localhost) by juice.shallow.net (8.9.3/8.9.3) with ESMTP id XAA89734; Sat, 13 May 2000 23:35:49 +0200 (CEST) (envelope-from joshua@roughtrade.net) Date: Sat, 13 May 2000 23:35:49 +0200 (CEST) From: Joshua Goodall To: chip@chocobo.cx Cc: freebsd-isp@FreeBSD.ORG Subject: Re: classless in-addr.arpa In-Reply-To: <20000510143503.A51587@setzer.chocobo.cx> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 10 May 2000, Chip Marshall wrote: > I've found AT&T at least like to use / instead of - in the rev name, > so it end up looking like 128/26.254.181.205.IN-ADDR.ARPA instead. RFC2317, which defines classless reverse delegation, uses forwardslash for examples and then advises readers not to do so, which is a little disingenuous and seems to be mostly for the purpose of annoying the RFC952 pedants with the "Aa-haha! It's NOT A HOSTNAME!" taunt rather than actually using appropriate syntax. Still, it's worth reading. I have seen interoperability tests confirm that a slash is okay even for NT's DNS server & resolver. Be warned that RFC2317, if misconfigured, can result in the customer polluting external caching resolvers with incorrect NS records for your octet-boundary zone. This is not a theoretical problem. I suggest always checking a full zone transfer before allowing the final delegation. -- Joshua Goodall IP Systems Engineer - InterXion - www.interxion.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sat May 13 16:25:44 2000 Delivered-To: freebsd-isp@freebsd.org Received: from smtp-out1.bellatlantic.net (smtp-out1.bellatlantic.net [199.45.39.156]) by hub.freebsd.org (Postfix) with ESMTP id 6DF2B37BB56 for ; Sat, 13 May 2000 16:25:33 -0700 (PDT) (envelope-from jan@smartsoft.cc) Received: from smartsoft.cc (client-209-158-92-83.bellatlantic.net [209.158.92.83]) by smtp-out1.bellatlantic.net (8.9.1/8.9.1) with ESMTP id TAA29844; Sat, 13 May 2000 19:25:24 -0400 (EDT) Message-ID: <391DE40E.42B96213@smartsoft.cc> Date: Sat, 13 May 2000 19:23:58 -0400 From: Jan Knepper Organization: Smartsoft, LLC X-Mailer: Mozilla 4.73 [en] (Windows NT 5.0; I) X-Accept-Language: en MIME-Version: 1.0 To: "Gary D. Margiotta" Cc: Matt Heckaman , FreeBSD-ISP Subject: Re: freebsd hosting. References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Gary D. Margiotta" wrote: > Postfix is a little more like sendmail, and is I think a bit better at > delegating for virtual hosting and aliasing (over Q-Mail at least)... I have > two machines running FreeBSD with Postfix, doing e-mail for over 250 domains - > nary a problem. Cool! Thanks for the pointer... Right now I have a FreeBSD box running with: 192.169.0.40 : one.com 192.169.0.41 : two.com 192.169.0.42 : three.com 192.169.0.43 : four.com Apache is configured and runs great! Now I have installed Postfix, but it isn't quite clear to me how I would be able to make sure that webmaster@one.com ends up in a different mailbox than webmaster@two.com. And next... How I would be able to pop it? Any hints/directions before I spend hours trying... TIA Oh by the way... It seems like I am going to run with a Burstable T1... thus... not Frame Relay... It's a little more, but it delivers a lot more! Thanks for all the help! Don't worry, be Kneppie! Jan -- =============================================================== Jan Knepper Smartsoft, LLC 88 Petersburg Road Petersburg, NJ 08270 U.S.A. Phone: 609-628-4260 FAX : 609-628-1267 http://www.smartsoft.cc/ --------------------------------------------------------------- http://www.pianoprincess.com/ http://www.mp3.com/pianoprincess http://www.riffage.com/Bands/0,2939,2859,00.html http://pianoprincess.iuma.com/ http://www.changemusic.com/piano_princess =============================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message