From owner-freebsd-isp Sun Dec 3 0: 1:36 2000 Delivered-To: freebsd-isp@freebsd.org Received: from mail.mclink.it (net128-053.mclink.it [195.110.128.53]) by hub.freebsd.org (Postfix) with ESMTP id 593C137B400 for ; Sun, 3 Dec 2000 00:01:33 -0800 (PST) Received: from net133-173.mclink.it (net133-173.mclink.it [195.110.133.173]) by mail.mclink.it (8.9.3/8.9.0) with ESMTP id JAA29986 for ; Sun, 3 Dec 2000 09:01:31 +0100 (CET) Date: Sun, 3 Dec 2000 09:00:33 +0100 From: Massimo Fubini X-Mailer: telnet host 25 Reply-To: Massimo Fubini X-Priority: 3 (Normal) Message-ID: <7344419667.20001203090033@aexis-telecom.it> To: freebsd-isp@freebsd.org Subject: Rude E-mail from my mail address X-Sender: Massimo Fubini Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, Yesterday I received an E-mail from a mailing list about freebsd advertising a web site. I _personally_ replied in a rude way to the sender of the e-mail, and _he_ forwarded all my e-mail to the freebsd-isp list, and to a lot of other address (I think more that 200 address from the number of replay I got, with some other mailing list). My email had the subject : "Re: Urgent: Please Read". So, I'm sorry you received that rude e-mail from my mail address, but I have never sent it to you. I have nothing with you, I'm sorry you received this E-Mail from my address, but it is a FALSE. If you don't trust me look at the header of the e-mail. It is probably coming from the IP address: 209.239.40.154, and my ISP (mclink.it) has not address in this range. Please, if my e-mail was forwarded to a mailing list, forward my excuse e-mail to that list. Best Regards, and sorry for the inconvenience. Massimo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 4:29:53 2000 Delivered-To: freebsd-isp@freebsd.org Received: from puck.firepipe.net (mcut-b-167.resnet.purdue.edu [128.211.209.167]) by hub.freebsd.org (Postfix) with ESMTP id 067A937B6A2 for ; Sun, 3 Dec 2000 04:29:52 -0800 (PST) Received: by puck.firepipe.net (Postfix, from userid 1000) id 3D1F919D2; Sun, 3 Dec 2000 07:29:51 -0500 (EST) Date: Sun, 3 Dec 2000 07:29:51 -0500 From: Will Andrews To: Massimo Fubini Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Rude E-mail from my mail address Message-ID: <20001203072951.O559@puck.firepipe.net> Reply-To: Will Andrews References: <7344419667.20001203090033@aexis-telecom.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <7344419667.20001203090033@aexis-telecom.it>; from supermax@aexis-telecom.it on Sun, Dec 03, 2000 at 09:00:33AM +0100 X-Operating-System: FreeBSD 4.1-STABLE i386 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Dec 03, 2000 at 09:00:33AM +0100, Massimo Fubini wrote: > So, I'm sorry you received that rude e-mail from my mail address, but > I have never sent it to you. I have nothing with you, I'm sorry you > received this E-Mail from my address, but it is a FALSE. Yes, I noticed the headers in that message were a bit strange, but I think my words still stand - you put yourself on a spam list. I know you're a member of the list, so.. -- wca To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 6:47:51 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 06:47:50 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ns.internet.dk (ns.internet.dk [194.19.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 3D54A37B402 for ; Sun, 3 Dec 2000 06:47:47 -0800 (PST) Received: (from uucp@localhost) by ns.internet.dk (8.11.1/8.11.1) with UUCP id eB3Elfa97484 for freebsd-isp@FreeBSD.ORG; Sun, 3 Dec 2000 15:47:41 +0100 (CET) (envelope-from leifn@neland.dk) Received: from gina (gina.neland.dk [192.168.0.14]) by arnold.neland.dk (8.11.0/8.11.0) with SMTP id eB3ElOj43815 for ; Sun, 3 Dec 2000 15:47:31 +0100 (CET) (envelope-from leifn@neland.dk) Message-ID: <007301c05d38$42d3c360$0e00a8c0@neland.dk> Reply-To: "Leif Neland" From: "Leif Neland" To: Subject: AvpBSDDaemon using all cpu Date: Sun, 3 Dec 2000 15:48:25 +0100 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Anybody using AvpBSDDaemon and avpkeeper for virusscanning? I've got two AvpBSDDaemon processes, one in msgwait, but the other (one pid no higher) in state RUN, using all available cpu, even if nothing is being scanned. Is that normal? The temperature of the temperature has increased 3 degrees and the load level is always at least 1, where it used to be 0.0x, according to big brother and mrtg. Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 9: 1:49 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 09:01:47 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from bsd.amplex.net (bsd.amplex.net [209.57.124.1]) by hub.freebsd.org (Postfix) with ESMTP id 0B7F937B400 for ; Sun, 3 Dec 2000 09:01:47 -0800 (PST) Received: (from root@localhost) by bsd.amplex.net (8.10.1/8.10.1) id eB3H1fv68748 for freebsd-isp@freebsd.org.AVP; Sun, 3 Dec 2000 12:01:41 -0500 (EST) Received: from marklaptop (dhcp56.amplex.net [209.57.124.56]) by bsd.amplex.net (8.10.1/8.10.1) with SMTP id eB3H1aH68717; Sun, 3 Dec 2000 12:01:36 -0500 (EST) From: "Mark Radabaugh" To: "Leif Neland" , Subject: RE: AvpBSDDaemon using all cpu Date: Sun, 3 Dec 2000 12:01:39 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <007301c05d38$42d3c360$0e00a8c0@neland.dk> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.3018.1300 Importance: Normal Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It's doesn't do that for me. It does have some problems with bounced mail that AVP is supposed to be working on.... 1696 root 2 0 5096K 120K select 2:27 0.00% 0.00% AvpBSDD 1695 root -4 0 5072K 124K msgwai 0:00 0.00% 0.00% AvpBSDD Overall AVP has had very little impact on processor performance. Mark Radabaugh VP, Amplex (419)833-3635 mark@amplex.net > -----Original Message----- > From: owner-freebsd-isp@FreeBSD.ORG > [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Leif Neland > Sent: Sunday, December 03, 2000 9:48 AM > To: freebsd-isp@FreeBSD.ORG > Subject: AvpBSDDaemon using all cpu > > > Anybody using AvpBSDDaemon and avpkeeper for virusscanning? > > I've got two AvpBSDDaemon processes, one in msgwait, but the other (one pid > no higher) in state RUN, using all available cpu, even if nothing is being > scanned. Is that normal? > > The temperature of the temperature has increased 3 degrees and the load > level is always at least 1, where it used to be 0.0x, according to big > brother and mrtg. > > Leif > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 9:31:46 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 09:31:44 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ns.internet.dk (ns.internet.dk [194.19.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 39FD937B400 for ; Sun, 3 Dec 2000 09:31:43 -0800 (PST) Received: (from uucp@localhost) by ns.internet.dk (8.11.1/8.11.1) with UUCP id eB3HVcD43335; Sun, 3 Dec 2000 18:31:38 +0100 (CET) (envelope-from leifn@neland.dk) Received: from gina (gina.neland.dk [192.168.0.14]) by arnold.neland.dk (8.11.0/8.11.0) with SMTP id eB3HJkj44412; Sun, 3 Dec 2000 18:19:50 +0100 (CET) (envelope-from leifn@neland.dk) Message-ID: <00e301c05d4d$8a540140$0e00a8c0@neland.dk> Reply-To: "Leif Neland" From: "Leif Neland" To: "Mark Radabaugh" , References: Subject: Re: AvpBSDDaemon using all cpu Date: Sun, 3 Dec 2000 18:16:54 +0100 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Subject: AvpBSDDaemon using all cpu > > > > > > Anybody using AvpBSDDaemon and avpkeeper for virusscanning? > > > > I've got two AvpBSDDaemon processes, one in msgwait, but the other (one pid > > no higher) in state RUN, using all available cpu, even if nothing is being > > scanned. Is that normal? > > > > The temperature of the temperature has increased 3 degrees and the load > > level is always at least 1, where it used to be 0.0x, according to big > > brother and mrtg. > > > > Leif > > > It's doesn't do that for me. It does have some problems with bounced mail that > AVP is supposed to be working on.... > > 1696 root 2 0 5096K 120K select 2:27 0.00% 0.00% AvpBSDD > 1695 root -4 0 5072K 124K msgwai 0:00 0.00% 0.00% AvpBSDD > > Overall AVP has had very little impact on processor performance. > > Mark Radabaugh > VP, Amplex > (419)833-3635 > mark@amplex.net > I killed AvpBSDDaemon, and restarted it. Now it looks reasonable again, and the cpu has cooled down again. 20149 root 2 0 5092K 4756K select 0:01 0.00% 0.00% AvpBSDDaemon 20148 root -4 0 5092K 4740K msgwai 0:00 0.00% 0.00% AvpBSDDaemon Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 9:55: 6 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 09:55:04 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from workhorse.iMach.com (workhorse.iMach.com [206.127.77.89]) by hub.freebsd.org (Postfix) with ESMTP id C1EB637B400 for ; Sun, 3 Dec 2000 09:55:03 -0800 (PST) Received: from localhost (forrestc@localhost) by workhorse.iMach.com (8.9.3/8.9.3) with ESMTP id KAA21996; Sun, 3 Dec 2000 10:51:52 -0700 (MST) Date: Sun, 3 Dec 2000 10:51:52 -0700 (MST) From: "Forrest W. Christian" To: Will Andrews Cc: Massimo Fubini , freebsd-isp@FreeBSD.ORG Subject: Re: Rude E-mail from my mail address In-Reply-To: <20001203072951.O559@puck.firepipe.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Actually, it appears that the spammer in this case is actually using some sort of mail reflector (like majordomo). THus, when you reply to the message, you actually go to everyone he sent it to originally. It kinda makes me wonder if he really was sincere in saying that some joker decided to add a whole bunch of bogus email addresses (such as the freebsd list) to his mailing list. On Sun, 3 Dec 2000, Will Andrews wrote: > Date: Sun, 3 Dec 2000 07:29:51 -0500 > From: Will Andrews > To: Massimo Fubini > Cc: freebsd-isp@FreeBSD.ORG > Subject: Re: Rude E-mail from my mail address > > On Sun, Dec 03, 2000 at 09:00:33AM +0100, Massimo Fubini wrote: > > So, I'm sorry you received that rude e-mail from my mail address, but > > I have never sent it to you. I have nothing with you, I'm sorry you > > received this E-Mail from my address, but it is a FALSE. > > Yes, I noticed the headers in that message were a bit strange, but I > think my words still stand - you put yourself on a spam list. I know > you're a member of the list, so.. > > -- > wca > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > - Forrest W. Christian (forrestc@imach.com) AC7DE ---------------------------------------------------------------------- iMach, Ltd., P.O. Box 5749, Helena, MT 59604 http://www.imach.com Solutions for your high-tech problems. (406)-442-6648 ---------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 16:35:27 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 16:35:26 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from lynx.aba.net.au (lynx.esec.com.au [203.21.84.1]) by hub.freebsd.org (Postfix) with SMTP id E927A37B400 for ; Sun, 3 Dec 2000 16:35:24 -0800 (PST) Received: (qmail 14571 invoked from network); 4 Dec 2000 00:35:16 -0000 Received: from swun.esec.com.au (HELO eSec.com.au) (203.21.85.207) by lynx.esec.com.au with SMTP; 4 Dec 2000 00:35:16 -0000 Sender: swun@FreeBSD.ORG Message-ID: <3A2AE70E.6AC3A0F2@eSec.com.au> Date: Mon, 04 Dec 2000 11:36:30 +1100 From: Sam Wun Organization: eSec X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-isp@FreeBSD.ORG Subject: WebCam problem, please help. References: Content-Type: text/plain; charset=gb2312 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, The Kodak DVC325 is not supported by gphoto. The gphoto software has not this model in the list. Any suggestion? I am using gphoto-0.4.3 under FreeBSD 4.2-stable. What other alternatives available so that I can make this webcam works under FreeBSD? Thanks sam. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 18:19: 4 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 18:19:02 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from andcoke.aeon.networktel.net (andcoke.aeon.networktel.net [216.83.238.151]) by hub.freebsd.org (Postfix) with ESMTP id 3417237B400 for ; Sun, 3 Dec 2000 18:19:02 -0800 (PST) Received: from localhost (phill@localhost) by andcoke.aeon.networktel.net (8.9.3/8.9.3) with ESMTP id UAA05170; Sun, 3 Dec 2000 20:19:16 -0600 (CST) (envelope-from phill@freebsd.org) X-Authentication-Warning: andcoke.aeon.networktel.net: phill owned process doing -bs Date: Sun, 3 Dec 2000 20:19:16 -0600 (CST) From: Phillip Salzman X-Sender: phill@andcoke.aeon.networktel.net To: Will Andrews Cc: Craig Shaver , isp@freebsd.org Subject: Re: Urgent: Please Read In-Reply-To: <20001202193849.M559@puck.firepipe.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org If you want to really be the BOFH, you could create an allow list. Meaning, deny all, allow from, say only, freebsd.org :) Altho, your customers may not like that too much, but works great for personal email in procmail :) --- Phillip Salzman On Sat, 2 Dec 2000, Will Andrews wrote: > On Sat, Dec 02, 2000 at 04:28:14PM -0800, Craig Shaver wrote: > > Hi - how do you do that? > > Find out their upstream's abuse address (http://www.mail-abuse.net/ has > a nice database for this) and contact them. If that doesn't work, go > higher upstream. > > If you can't reach somebody to have it shutdown, then have it put on > MAPS/RSS/ORBS/etc. > > I'm not an expert at shutting relays down -- thankfully that's never > been in my job description. *grin* So take my suggestion with a grain > of salt. > > -- > wca > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sun Dec 3 21:33:43 2000 From owner-freebsd-isp@FreeBSD.ORG Sun Dec 3 21:33:40 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from c014.sfo.cp.net (c014-h001.c014.sfo.cp.net [209.228.12.65]) by hub.freebsd.org (Postfix) with SMTP id 4A81437B400 for ; Sun, 3 Dec 2000 21:33:40 -0800 (PST) Received: (cpmta 11745 invoked from network); 3 Dec 2000 21:33:39 -0800 Received: from d8c81e5f.dsl.flashcom.net (HELO quadrajet.flashcom.com) (216.200.30.95) by smtp.flashcom.net (209.228.12.65) with SMTP; 3 Dec 2000 21:33:39 -0800 X-Sent: 4 Dec 2000 05:33:39 GMT Received: (from guy@localhost) by quadrajet.flashcom.com (8.9.3/8.9.3) id VAA48112; Sun, 3 Dec 2000 21:32:01 -0800 (PST) (envelope-from gharris) Date: Sun, 3 Dec 2000 21:32:00 -0800 From: Guy Harris To: Stanley.Hopcroft@ipaustralia.gov.au Cc: rowan@sensation.net.au, freebsd-isp@freebsd.org Subject: Re: tcpdump & user-ppp/tunX. Ethereal ? Message-ID: <20001203213200.I349@quadrajet.flashcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.4i Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Another problem is that "tunX" devices being DLT_NULL will confuse > tcpdump if the link-layer header isn't 4 bytes of AF_ value specifying > the protocol used by the payload; if, for example, it's a PPP header, > tcpdump will probably get greatly confused in other ways. ... > I still have a capture of that sort which I got when the > DLT_NULL-capture-with-PPP-header problem was reported on one of the > Ethereal mailing lists (that being what provoked the addition of the > aforementioned hack); I shall look into putting an equivalent hack into > tcpdump, sigh (it'd show up in the current CVS version). A quick look at the FreeBSD 3.4 code, at least, suggests that the link-layer header will be 4 bytes of AF_ value with the "tunX" devices, so tcpdump should have no problem dissecting those packets. No tcpdump hack should be necessary (unless something *else* will still cause those DLT_NULL-capture-with-PPP-header captures to show up; I think it was an ISDN capture), and the "ioctl" to which I referred: > (It might be Really Nice if there were, say, an "ioctl" that could be > done on "tunX" devices to set the DLT_ type of the device to something > other than DLT_NULL, and if programs using it for, say, user-mode PPP > set the DLT_ type appropriately.) shouldn't be necessary. The reason for the lack of any packet length when the "-e" option was used presumably is, as per my previous mail, the fact that, for DLT_NULL (and DLT_PPP), the link-layer header information that tcpdump prints with "-e" doesn't, for better or worse, include the packet length. As for why it the length showed up on PPP devices in 2.2.8R but not 3.4R, the answer to the question > has something major changed with the ppp/tun device structure, BPF, or > tcpdump since 2.2.8R? is "yes" - revision 1.2.2.1 of "print-ppp.c" in tcpdump, which is tagged with RELENG_2_2_8_RELEASE, printed the length when the "-e" flag is specified, but, in revision 1.6, that stuff was removed (see PR 7741, which includes a new version of "print-ppp.c" that didn't print the length), and 1.7.2.2 was the revision in 3.4R. I'll check to make sure that the version in the tcpdump.org CVS tree prints the length, and, if, as, and when that gets picked up by FreeBSD, the length will be back, at least for PPP. (I'll also look at putting it for DLT_NULL, which should make it show up for the "tunX" devices.) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon Dec 4 0:35:53 2000 From owner-freebsd-isp@FreeBSD.ORG Mon Dec 4 00:35:51 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from christel.heitec.net (christel.heitec.net [193.101.232.3]) by hub.freebsd.org (Postfix) with ESMTP id 4099E37B400 for ; Mon, 4 Dec 2000 00:35:51 -0800 (PST) Received: from tashi.admin.er.heitec.net (paladin.heitec.net [193.101.232.30]) by christel.heitec.net (Postfix) with ESMTP id 0EFC3354813 for ; Mon, 4 Dec 2000 09:41:40 +0100 (CET) Received: by tashi.admin.er.heitec.net (Postfix, from userid 1000) id 1D4BC1DE1; Mon, 4 Dec 2000 09:37:29 +0100 (CET) Date: Mon, 4 Dec 2000 09:37:29 +0100 To: freebsd-isp@freebsd.org Subject: Re: client firewall with 2 ethernet ports Message-ID: <20001204093729.L793@heitec.net> Mail-Followup-To: freebsd-isp@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from nicole@unixgirl.com on Fri, Dec 01, 2000 at 13:44:46 -0700 Organization: Heitec AG From: lenz@heitec.net (Lenz Gschwendtner) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Nicole, On Fri, 01 Dec 2000, Nicole wrote: > How do I setup rules that apply to one port and not the other? > Would I use a modified form of the simple rules? there are several methods: first you can simply define the traffic by direction and interface in statements like: $fwcmd add deny log all from ${inet} to any in recv ${oif} $fwcmd add pass log all from ${inet} to any out xmit ${oif} whereas you define $oif to the outside interface: oif="de0" or you simply define a interface without direction in a statement like this (in a nat config file): $fwcmd add divert natd all from any to any via ${natd_interface} for better understanding of the firewall script it is preferrable to include the direction in which the rule works (out xmit/in recv) cheers lenz -- (__) eat penguins instead, they start to (++)-----i\ spread around anyway! ~~| BSE | * |_|~|_| FreeBSD Systemadministrator To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon Dec 4 0:40:59 2000 From owner-freebsd-isp@FreeBSD.ORG Mon Dec 4 00:40:57 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from christel.heitec.net (christel.heitec.net [193.101.232.3]) by hub.freebsd.org (Postfix) with ESMTP id 8210737B400 for ; Mon, 4 Dec 2000 00:40:57 -0800 (PST) Received: from tashi.admin.er.heitec.net (paladin.heitec.net [193.101.232.30]) by christel.heitec.net (Postfix) with ESMTP id E30EB354813 for ; Mon, 4 Dec 2000 09:46:51 +0100 (CET) Received: by tashi.admin.er.heitec.net (Postfix, from userid 1000) id 8F2BD1DE1; Mon, 4 Dec 2000 09:42:41 +0100 (CET) Date: Mon, 4 Dec 2000 09:42:41 +0100 To: freebsd-isp@freebsd.org Subject: Re: DHCP Tricky config Message-ID: <20001204094241.M793@heitec.net> Mail-Followup-To: freebsd-isp@freebsd.org References: <00120216533101.00265@freefire.psi-domain.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <00120216533101.00265@freefire.psi-domain.co.uk>; from heckfordj@psi-domain.co.uk on Sat, Dec 02, 2000 at 16:50:53 +0000 Organization: Heitec AG From: lenz@heitec.net (Lenz Gschwendtner) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Jamie, On Sat, 02 Dec 2000, Jamie Heckford wrote: > Reason being it is easier to implement User level Filtering options. do you think you are on the right track? it is really quite simple to modify the ip-adress on win-boxes, do you really want to place your security on the good will of the users? i would overthink this first :) lenz -- (__) eat penguins instead, they start to (++)-----i\ spread around anyway! ~~| BSE | * |_|~|_| FreeBSD Systemadministrator To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon Dec 4 2:24:24 2000 From owner-freebsd-isp@FreeBSD.ORG Mon Dec 4 02:24:22 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.prod.itd.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 41B5337B400 for ; Mon, 4 Dec 2000 02:24:22 -0800 (PST) Received: from veager.siteplus.net (user-38lc8tk.dialup.mindspring.com [209.86.35.180]) by hawk.prod.itd.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id CAA29836 for ; Mon, 4 Dec 2000 02:24:20 -0800 (PST) Date: Mon, 4 Dec 2000 05:23:53 -0500 (EST) From: Jim Weeks To: freebsd-isp@freebsd.org Subject: reread rc.conf Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Brain dead again. Localhost has quit responding to ping on one of my machines. I know there is a command to restart reread /etc/rc.conf. I have used it before, but now I can't remember what it is. Could some one refresh my memory. I can't seem to find it in the archives, even though I know that is where I learned of it. Thanks, -- Jim Weeks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Mon Dec 4 3:25:14 2000 From owner-freebsd-isp@FreeBSD.ORG Mon Dec 4 03:25:11 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.prod.itd.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 83C9637B401 for ; Mon, 4 Dec 2000 03:25:11 -0800 (PST) Received: from veager.siteplus.net (user-38lc8tk.dialup.mindspring.com [209.86.35.180]) by albatross.prod.itd.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id DAA14136 for ; Mon, 4 Dec 2000 03:25:10 -0800 (PST) Date: Mon, 4 Dec 2000 06:24:42 -0500 (EST) From: Jim Weeks To: freebsd-isp@freebsd.org Subject: Re: reread rc.conf In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org And just to prove it, I will answer my own post ;/ /etc/netstart On Mon, 4 Dec 2000, Jim Weeks wrote: > Brain dead again. > > Localhost has quit responding to ping on one of my machines. I know there > is a command to restart reread /etc/rc.conf. I have used it before, but > now I can't remember what it is. Could some one refresh my memory. I > can't seem to find it in the archives, even though I know that is where I > learned of it. > > Thanks, > > -- > Jim Weeks > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 6:28:32 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 06:28:29 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from sun2.siteone.net (ns2.site-one.com [209.246.218.67]) by hub.freebsd.org (Postfix) with ESMTP id 3B3E237B400 for ; Tue, 5 Dec 2000 06:28:29 -0800 (PST) Received: from David (wan104.siteone.net [209.246.218.40]) by sun2.siteone.net (8.9.3/8.9.3) with SMTP id JAA22315 for ; Tue, 5 Dec 2000 09:29:20 -0500 From: "David Lawson" To: Subject: FRAME BUFFER Date: Tue, 5 Dec 2000 09:28:35 -0500 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0000_01C05E9D.BDE8C940" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_0000_01C05E9D.BDE8C940 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Does anyone know if FreeBSD supports Frame Buffer? We use FreeBSD as our servers but would also like to use them to develop on. Or if there is anything like it, it would be nice to be able to fit more on the screen. David L. Lawson Technical Support Manager Partner Alliance Director Site One Networks, Inc. 302-337-8800 Phone 800-354-5434 Toll Free 302-337-3915 Fax ------=_NextPart_000_0000_01C05E9D.BDE8C940 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Does = anyone know if=20 FreeBSD supports Frame Buffer? We use FreeBSD as our servers but would = also like=20 to use them to develop on. Or if there is anything like it, it would be = nice to=20 be able to fit more on the screen.
 
 
 

David L. Lawson
Technical Support = Manager
Partner Alliance=20 Director
Site One Networks, Inc.
302-337-8800 = Phone
800-354-5434 Toll=20 Free
302-337-3915 Fax

 
------=_NextPart_000_0000_01C05E9D.BDE8C940-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 7: 1:58 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 07:01:55 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.seidata.com (unknown [208.10.211.10]) by hub.freebsd.org (Postfix) with ESMTP id 1EC3737B400 for ; Tue, 5 Dec 2000 07:01:55 -0800 (PST) Received: from shell.seidata.com (shell.seidata.com [208.10.211.6]) by mail.seidata.com (8.11.1/8.11.1) with ESMTP id eB5ExRO68160; Tue, 5 Dec 2000 10:00:48 -0500 (EST) (envelope-from pboehmer@seidata.com) Date: Tue, 5 Dec 2000 09:59:22 -0500 (EST) From: Paul Boehmer To: David Lawson Cc: freebsd-isp@FreeBSD.ORG Subject: Re: FRAME BUFFER In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You probably want vidcontrol. Depending on your needs, you may have to compile VESA support into the kernel. man vidcontrol for more info Paul Boehmer On Tue, 5 Dec 2000, David Lawson wrote: > Does anyone know if FreeBSD supports Frame Buffer? We use FreeBSD as our > servers but would also like to use them to develop on. Or if there is > anything like it, it would be nice to be able to fit more on the screen. > > > > David L. Lawson > Technical Support Manager > Partner Alliance Director > Site One Networks, Inc. > 302-337-8800 Phone > 800-354-5434 Toll Free > 302-337-3915 Fax > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 7:13: 7 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 07:13:06 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from beta.root-servers.ch (beta.root-servers.ch [195.49.33.19]) by hub.freebsd.org (Postfix) with SMTP id B36BA37B400 for ; Tue, 5 Dec 2000 07:13:01 -0800 (PST) Received: (qmail 297 invoked from network); 5 Dec 2000 15:12:56 -0000 Received: from unknown (HELO WORK) (62.2.106.244) by beta.root-servers.ch with SMTP; 5 Dec 2000 15:12:56 -0000 Date: Tue, 5 Dec 2000 16:13:09 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.47 Halloween Edition) Personal Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <15473937196.20001205161309@buz.ch> To: isp@freebsd.org Subject: htaccess only protecting one specific subdir? Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I'm desperately seeking for a way to protect a directory via .htaccess and basic authentication which normally is pretty easy, but I need the .htaccess to reside one directory level higher in the tree and still only protect the one subdir: /.htaccess #should protect /subdir #but leave all other files/directory open I've been searching the Apache doc for quite some time now but the only thing I found, which could be of some use, would be either or and both seem to be valid only in the server conf but not in .htaccess files. TIA & Best regards, Gabriel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 8:14: 1 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 08:13:59 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from rad3.1stup.com (rad3.1stup.com [209.143.242.34]) by hub.freebsd.org (Postfix) with ESMTP id 2263437B400 for ; Tue, 5 Dec 2000 08:13:54 -0800 (PST) Received: from veager (ip51.jackson10.ms.pub-ip.psi.net [38.36.61.51]) by rad3.1stup.com (8.10.1/8.10.1) with SMTP id eB5GDb929810 for ; Tue, 5 Dec 2000 08:13:37 -0800 Message-ID: <006501c05ed6$501a7f60$333d2426@siteplus.net> From: "Jim Weeks" To: Subject: htaccess only protecting one specific subdir? Date: Tue, 5 Dec 2000 11:13:30 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org ----- Original Message ----- From: "Jim Weeks" To: "Gabriel Ambuehl" Sent: Tuesday, December 05, 2000 11:11 AM Subject: Re: htaccess only protecting one specific subdir? > Gabriel Ambuehl dispersed into the ether > > > Hello, > > I'm desperately seeking for a way to protect a directory via .htaccess > > and basic authentication which normally is pretty easy, but I need the > > .htaccess to reside one directory level higher in the tree and still > > only protect the one subdir: > > > > /.htaccess #should protect > > /subdir #but leave all other files/directory open > > I never actually had an occasion to this, but it seems to be easy stuff. > The answer is in the Limit directive. The .htaccess file in the main > directory is overridden by placing another .htaccess in the subdirectory. > Simply remove the GET form the Limit directive in the subdirectory .htaccess > file. In fact I believe you could just put by itself. I will > leave it up to you to experiment. > > AuthUserFile /usr/home/simpsons/.htpasswd > AuthGroupFile /dev/null > AuthName ByPassword > AuthType Basic > > require valid-user > > > Hope this helps, > > Jim > ________________________________________________________ 1stUp.com - Free the Web Get your free Internet access at http://www.1stUp.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 8:20: 4 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 08:19:57 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ams1.aignet.ro (ams1.aignet.ro [194.176.168.1]) by hub.freebsd.org (Postfix) with ESMTP id 9E93237B69F for ; Tue, 5 Dec 2000 08:19:56 -0800 (PST) Received: from aignet.ro (mgmt.aignet.ro [194.176.168.4]) by ams1.aignet.ro (8.11.0/8.11.0) with ESMTP id eB5HJMX20671; Tue, 5 Dec 2000 19:19:22 +0200 Sender: mick@aignet.ro Message-ID: <3A2D1585.7041BA54@aignet.ro> Date: Tue, 05 Dec 2000 18:19:17 +0200 From: Mihai Claudiu Capatina X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: Gabriel Ambuehl Cc: isp@FreeBSD.ORG Subject: Re: htaccess only protecting one specific subdir? References: <15473937196.20001205161309@buz.ch> Content-Type: multipart/alternative; boundary="------------E05A6E1E5E2228DA8B20C4FF" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --------------E05A6E1E5E2228DA8B20C4FF Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Let's say you have the following structure : /my_www_root_dir- |-subdir1 |-subdir2 |-.htaccess you can try to use with the right auth and after that define with the AllowOverride None directive.... This is untested so try it at your own risc...;-) Mick Gabriel Ambuehl wrote: > Hello, > I'm desperately seeking for a way to protect a directory via .htaccess > and basic authentication which normally is pretty easy, but I need the > .htaccess to reside one directory level higher in the tree and still > only protect the one subdir: > > /.htaccess #should protect > /subdir #but leave all other files/directory open > > I've been searching the Apache doc for quite some time now but the > only thing I found, which could be of some use, would be either > or and both seem to be valid only in the server > conf but not in .htaccess files. > > TIA & Best regards, > Gabriel > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- Mihai Claudiu Capatina Wireless Network Manager & Network Administrator AIG S.A. ( http://www.aignet.ro ) Phone : +40 95 102862 / +40 1 3102895 Fax : +40 1 3102896 --------------E05A6E1E5E2228DA8B20C4FF Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit  
Let's say you have the following structure :
/my_www_root_dir-
                                      |-subdir1
                                      |-subdir2
                                      |-.htaccess

you can try to use <Directory /my_www_root_dir>
 with the right auth and after that define
<Directory /my_www_root_dir/subdir1>
with the AllowOverride None directive....

This is untested so try it at your own risc...;-)

Mick
 
 

Gabriel Ambuehl wrote:

Hello,
I'm desperately seeking for a way to protect a directory via .htaccess
and basic authentication which normally is pretty easy, but I need the
.htaccess to reside one directory level higher in the tree and still
only protect the one subdir:

/.htaccess    #should protect
/subdir       #but leave all other files/directory open

I've been searching the Apache doc for quite some time now but the
only thing I found, which could be of some use, would be either
<Directory> or <Location> and both seem to be valid only in the server
conf but not in .htaccess files.

TIA & Best regards,
 Gabriel

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body of the message

-- 
Mihai Claudiu Capatina
Wireless Network Manager & Network Administrator

AIG S.A. ( http://www.aignet.ro )

Phone : +40 95 102862 / +40 1 3102895
Fax   : +40 1 3102896
  --------------E05A6E1E5E2228DA8B20C4FF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 8:37:57 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 08:37:56 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from beta.root-servers.ch (beta.root-servers.ch [195.49.33.19]) by hub.freebsd.org (Postfix) with SMTP id 1660537B400 for ; Tue, 5 Dec 2000 08:37:55 -0800 (PST) Received: (qmail 1998 invoked from network); 5 Dec 2000 16:37:53 -0000 Received: from unknown (HELO WORK) (62.2.106.244) by beta.root-servers.ch with SMTP; 5 Dec 2000 16:37:53 -0000 Date: Tue, 5 Dec 2000 17:38:07 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.47 Halloween Edition) Personal Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <18379035326.20001205173807@buz.ch> To: "Jim Weeks" Cc: isp@freebsd.org Subject: Re[4]: htaccess only protecting one specific subdir? In-reply-To: <006d01c05ed6$ea130060$333d2426@siteplus.net> References: <15473937196.20001205161309@buz.ch> <005d01c05ed5$f8452560$333d2426@siteplus.net> <19677673168.20001205171525@buz.ch> <006d01c05ed6$ea130060$333d2426@siteplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello Jim, Tuesday, December 05, 2000, 5:17:49 PM, you wrote: > Are you saying that .htaccess will only work in your root directory? No, but the users haven't got the permission to write to the directory I'd like to protect... Best regards, Gabriel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 8:39:16 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 08:39:13 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from rad3.1stup.com (rad3.1stup.com [209.143.242.34]) by hub.freebsd.org (Postfix) with ESMTP id E8EDF37B401 for ; Tue, 5 Dec 2000 08:39:12 -0800 (PST) Received: from veager (ip51.jackson10.ms.pub-ip.psi.net [38.36.61.51]) by rad3.1stup.com (8.10.1/8.10.1) with SMTP id eB5Gcn900887; Tue, 5 Dec 2000 08:38:50 -0800 Message-ID: <007901c05ed9$d6246f00$333d2426@siteplus.net> From: "Jim Weeks" To: "Mihai Claudiu Capatina" , "Gabriel Ambuehl" Cc: References: <15473937196.20001205161309@buz.ch> <3A2D1585.7041BA54@aignet.ro> Subject: Re: htaccess only protecting one specific subdir? Date: Tue, 5 Dec 2000 11:38:41 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0076_01C05EAF.EAFB4F40" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_0076_01C05EAF.EAFB4F40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have done a little experimenting and discovered that you can cut this = down to only the directive in subdirectories. In other words, = if you only wanted to protect the higher level directory, you would = place a complete .htaccess file into / and then place the following in = any /subdirectory that you want to enjoy complete access. require Jim ------=_NextPart_000_0076_01C05EAF.EAFB4F40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I have done a little experimenting and = discovered=20 that you can cut this down to only the <Limit > directive in=20 subdirectories.  In other words, if you only wanted to protect the = higher=20 level directory, you would place a complete .htaccess file into / and = then place=20 the following in any /subdirectory that you want to enjoy complete=20 access.
 
<Limit >
   =20 require
</Limit>
 
Jim
------=_NextPart_000_0076_01C05EAF.EAFB4F40-- ________________________________________________________ 1stUp.com - Free the Web Get your free Internet access at http://www.1stUp.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 9:53:40 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 09:53:38 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ns.shawneelink.net (ns.shawneelink.net [216.240.66.11]) by hub.freebsd.org (Postfix) with ESMTP id 58ED437B400 for ; Tue, 5 Dec 2000 09:53:38 -0800 (PST) Received: from jan (gate14.shawneelink.net [216.240.79.14]) by ns.shawneelink.net (8.10.1/8.10.1) with ESMTP id eB5HrQV31432; Tue, 5 Dec 2000 11:53:26 -0600 (CST) Message-Id: <4.2.2.20001205115936.00b63a60@mail.jbacher.com> X-Sender: jb@mail.jbacher.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Tue, 05 Dec 2000 12:02:04 -0600 To: Gabriel Ambuehl , isp@FreeBSD.ORG From: Jan Bacher Subject: Re: htaccess only protecting one specific subdir? In-Reply-To: <15473937196.20001205161309@buz.ch> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 04:13 PM 12/5/00 +0100, Gabriel Ambuehl wrote: >Hello, >I'm desperately seeking for a way to protect a directory via .htaccess >and basic authentication which normally is pretty easy, but I need the >.htaccess to reside one directory level higher in the tree and still >only protect the one subdir: > >/.htaccess #should protect >/subdir #but leave all other files/directory open Use dbmmanage and specify the location of the auth file in your httpd.conf outside of your web root. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 10:33: 0 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 10:32:58 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from beta.root-servers.ch (beta.root-servers.ch [195.49.33.19]) by hub.freebsd.org (Postfix) with SMTP id 4732D37B400 for ; Tue, 5 Dec 2000 10:32:54 -0800 (PST) Received: (qmail 14660 invoked from network); 5 Dec 2000 18:32:50 -0000 Received: from unknown (HELO WORK) (62.2.106.244) by beta.root-servers.ch with SMTP; 5 Dec 2000 18:32:50 -0000 Date: Tue, 5 Dec 2000 19:33:04 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.47 Halloween Edition) Personal Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <14685932774.20001205193304@buz.ch> To: Jan Bacher Cc: isp@FreeBSD.ORG Subject: Re[2]: htaccess only protecting one specific subdir? In-reply-To: <4.2.2.20001205115936.00b63a60@mail.jbacher.com> References: <4.2.2.20001205115936.00b63a60@mail.jbacher.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello Jan, Tuesday, December 05, 2000, 7:02:04 PM, you wrote: >>/.htaccess #should protect >>/subdir #but leave all other files/directory open > Use dbmmanage and specify the location of the auth file in your httpd.conf > outside of your web root. This means I need to change my config which is what I wanted to avoid in first place. At the moment, I guess I'll just write a small PHP script which will act as some kind of (incl. access control, of course) proxy to the otherwise not publicly available pages... Best regards, Gabriel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 10:55:11 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 10:55:08 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mailman.thenap.com (mailman.thenap.com [209.190.0.10]) by hub.freebsd.org (Postfix) with ESMTP id 3AF0237B400 for ; Tue, 5 Dec 2000 10:55:08 -0800 (PST) Received: by mailman.thenap.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 14:05:23 -0500 Message-ID: From: "Drew J. Weaver" To: "'freebsd-isp@freebsd.org'" Subject: Really odd problem Date: Tue, 5 Dec 2000 14:05:23 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05EEE.51CBB64A" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05EEE.51CBB64A Content-Type: text/plain; charset="iso-8859-1" We have a Freebsd 4.2 box on our network, after the box boots, it brings up the network and everything is great, I can telnet into it.. everything good, but about 30-60 minutes later no incoming traffic is getting to the server. If i ping the machine, or telnet to it, I get nothing. If I go to the terminal and ping anything then it "wakes up" does anyone have any idea what would cause it to stop "listening" to incoming network requests? This is becoming very tiresome and i've done everything known to me. Thanks, -Drew ------_=_NextPart_001_01C05EEE.51CBB64A Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Really odd problem

        We have a Freebsd 4.2 box on our network, after the box = boots, it brings up the network and everything is great, I can telnet = into it.. everything good, but about 30-60 minutes later no incoming = traffic is getting to the server. If i ping the machine, or telnet to = it, I get nothing. If I go to the terminal and ping anything then it = "wakes up" does anyone have any idea what would cause it to = stop "listening" to incoming network requests? This is = becoming very tiresome and i've done everything known to me.

Thanks,
-Drew




------_=_NextPart_001_01C05EEE.51CBB64A-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 11: 5:35 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 11:05:30 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.tcworks.net (mail.tcworks.net [216.61.218.4]) by hub.freebsd.org (Postfix) with ESMTP id EB74A37B400 for ; Tue, 5 Dec 2000 11:05:28 -0800 (PST) Received: from tcworks.net (stuck.sticky.org [216.61.218.6]) by mail.tcworks.net (8.9.3/8.9.3) with ESMTP id NAA50837; Tue, 5 Dec 2000 13:03:03 -0600 (CST) (envelope-from ccook@tcworks.net) Sender: xcess@mail.tcworks.net Message-ID: <3A2D3CBF.51C16A91@tcworks.net> Date: Tue, 05 Dec 2000 13:06:39 -0600 From: Chris Cook X-Mailer: Mozilla 4.72 [en] (X11; I; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: "Drew J. Weaver" , freebsd-isp@freebsd.org Subject: Re: Really odd problem References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > "Drew J. Weaver" wrote: > > We have a Freebsd 4.2 box on our network, after the box boots, > it brings up the network and everything is great, I can telnet into > it.. everything good, but about 30-60 minutes later no incoming > traffic is getting to the server. If i ping the machine, or telnet to > it, I get nothing. If I go to the terminal and ping anything then it > "wakes up" does anyone have any idea what would cause it to stop > "listening" to incoming network requests? This is becoming very > tiresome and i've done everything known to me. What does /var/log/messages say? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 11:20:59 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 11:20:56 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mailman.thenap.com (mailman.thenap.com [209.190.0.10]) by hub.freebsd.org (Postfix) with ESMTP id 784EC37B400 for ; Tue, 5 Dec 2000 11:20:55 -0800 (PST) Received: by mailman.thenap.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 14:31:10 -0500 Message-ID: From: "Drew J. Weaver" To: "'freebsd-isp@freebsd.org'" Subject: FW: Really odd problem Date: Tue, 5 Dec 2000 14:31:09 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05EF1.EBA59300" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05EF1.EBA59300 Content-Type: text/plain; charset="iso-8859-1" Absolutely nothing. It has me logging in, then nothing else. So basically whatever the problem is, Freebsd isnt aware of it. -Drew -----Original Message----- From: Chris Cook [mailto:ccook@tcworks.net] Sent: Tuesday, December 05, 2000 2:07 PM To: Drew J. Weaver; freebsd-isp@freebsd.org Subject: Re: Really odd problem > "Drew J. Weaver" wrote: > > We have a Freebsd 4.2 box on our network, after the box boots, > it brings up the network and everything is great, I can telnet into > it.. everything good, but about 30-60 minutes later no incoming > traffic is getting to the server. If i ping the machine, or telnet to > it, I get nothing. If I go to the terminal and ping anything then it > "wakes up" does anyone have any idea what would cause it to stop > "listening" to incoming network requests? This is becoming very > tiresome and i've done everything known to me. What does /var/log/messages say? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message ------_=_NextPart_001_01C05EF1.EBA59300 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable FW: Really odd problem

    Absolutely nothing. It has me = logging in, then nothing else. So basically whatever the problem is, = Freebsd isnt aware of it.

-Drew

-----Original Message-----
From: Chris Cook [mailto:ccook@tcworks.net]
Sent: Tuesday, December 05, 2000 2:07 PM
To: Drew J. Weaver; freebsd-isp@freebsd.org
Subject: Re: Really odd problem


> "Drew J. Weaver" wrote:
>
>         = We have a Freebsd 4.2 box on our network, after the box boots,
> it brings up the network and everything is = great, I can telnet into
> it.. everything good, but about 30-60 minutes = later no incoming
> traffic is getting to the server. If i ping the = machine, or telnet to
> it, I get nothing. If I go to the terminal and = ping anything then it
> "wakes up" does anyone have any idea = what would cause it to stop
> "listening" to incoming network = requests? This is becoming very
> tiresome and i've done everything known to = me.


What does /var/log/messages say?


To Unsubscribe: send mail to = majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body = of the message

------_=_NextPart_001_01C05EF1.EBA59300-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 11:27:39 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 11:27:37 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from thor.ghim.org (thor.ghim.org [209.249.182.115]) by hub.freebsd.org (Postfix) with ESMTP id E470C37B400 for ; Tue, 5 Dec 2000 11:27:36 -0800 (PST) Received: from electra (electra.nexus [192.168.2.128]) by thor.ghim.org (8.10.1/8.10.1) with SMTP id eB5JRUi32313; Tue, 5 Dec 2000 19:27:30 GMT Received: by electra (sSMTP sendmail emulation); Tue, 5 Dec 2000 19:27:29 +0000 Date: Tue, 5 Dec 2000 19:27:29 +0000 From: George Lewis To: "Drew J. Weaver" Cc: "'freebsd-isp@freebsd.org'" Subject: Re: FW: Really odd problem Message-ID: <20001205192729.C22024@schvin.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from drew.weaver@thenap.com on Tue, Dec 05, 2000 at 02:31:09PM -0500 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org What kind of NIC? Have you tried one with a different driver perhaps? Drew J. Weaver (drew.weaver@thenap.com) wrote: > Absolutely nothing. It has me logging in, then nothing else. So > basically whatever the problem is, Freebsd isnt aware of it. > > -Drew > > -----Original Message----- > From: Chris Cook [mailto:ccook@tcworks.net] > Sent: Tuesday, December 05, 2000 2:07 PM > To: Drew J. Weaver; freebsd-isp@freebsd.org > Subject: Re: Really odd problem > > > > "Drew J. Weaver" wrote: > > > > We have a Freebsd 4.2 box on our network, after the box boots, > > it brings up the network and everything is great, I can telnet into > > it.. everything good, but about 30-60 minutes later no incoming > > traffic is getting to the server. If i ping the machine, or telnet to > > it, I get nothing. If I go to the terminal and ping anything then it > > "wakes up" does anyone have any idea what would cause it to stop > > "listening" to incoming network requests? This is becoming very > > tiresome and i've done everything known to me. > > > What does /var/log/messages say? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- George Lewis http://schvin.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 11:28:53 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 11:28:48 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mailman.thenap.com (mailman.thenap.com [209.190.0.10]) by hub.freebsd.org (Postfix) with ESMTP id 4FB8337B400 for ; Tue, 5 Dec 2000 11:28:48 -0800 (PST) Received: by mailman.thenap.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 14:39:03 -0500 Message-ID: From: "Drew J. Weaver" To: 'George Lewis' Cc: "'freebsd-isp@freebsd.org'" Subject: RE: FW: Really odd problem Date: Tue, 5 Dec 2000 14:39:03 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05EF3.05FC8CF8" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05EF3.05FC8CF8 Content-Type: text/plain; charset="iso-8859-1" Well, I've used both the one on-board (intel) and a off-board PCI Intel 10/100 combo card. This is very strange, I even replaced the ram at the behest of someone on the #freebsd IRC channel. -Drew -----Original Message----- From: George Lewis [mailto:schvin@schvin.net] Sent: Tuesday, December 05, 2000 2:27 PM To: Drew J. Weaver Cc: 'freebsd-isp@freebsd.org' Subject: Re: FW: Really odd problem What kind of NIC? Have you tried one with a different driver perhaps? Drew J. Weaver (drew.weaver@thenap.com) wrote: > Absolutely nothing. It has me logging in, then nothing else. So > basically whatever the problem is, Freebsd isnt aware of it. > > -Drew > > -----Original Message----- > From: Chris Cook [mailto:ccook@tcworks.net] > Sent: Tuesday, December 05, 2000 2:07 PM > To: Drew J. Weaver; freebsd-isp@freebsd.org > Subject: Re: Really odd problem > > > > "Drew J. Weaver" wrote: > > > > We have a Freebsd 4.2 box on our network, after the box boots, > > it brings up the network and everything is great, I can telnet into > > it.. everything good, but about 30-60 minutes later no incoming > > traffic is getting to the server. If i ping the machine, or telnet to > > it, I get nothing. If I go to the terminal and ping anything then it > > "wakes up" does anyone have any idea what would cause it to stop > > "listening" to incoming network requests? This is becoming very > > tiresome and i've done everything known to me. > > > What does /var/log/messages say? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- George Lewis http://schvin.net/ ------_=_NextPart_001_01C05EF3.05FC8CF8 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: FW: Really odd problem

        Well, I've = used both the one on-board (intel) and a off-board PCI Intel 10/100 = combo card. This is very strange, I even replaced the ram at the behest = of someone on the #freebsd IRC channel.

-Drew


-----Original Message-----
From: George Lewis [mailto:schvin@schvin.net]
Sent: Tuesday, December 05, 2000 2:27 PM
To: Drew J. Weaver
Cc: 'freebsd-isp@freebsd.org'
Subject: Re: FW: Really odd problem


What kind of NIC? Have you tried one with a different = driver perhaps?

Drew J. Weaver (drew.weaver@thenap.com) wrote:
>     Absolutely nothing. It = has me logging in, then nothing else. So
> basically whatever the problem is, Freebsd isnt = aware of it.
>
> -Drew
>
> -----Original Message-----
> From: Chris Cook [mailto:ccook@tcworks.net]
> Sent: Tuesday, December 05, 2000 2:07 PM
> To: Drew J. Weaver; = freebsd-isp@freebsd.org
> Subject: Re: Really odd problem
>
>
> > "Drew J. Weaver" wrote:
> >
> = >         We have a Freebsd = 4.2 box on our network, after the box boots,
> > it brings up the network and everything is = great, I can telnet into
> > it.. everything good, but about 30-60 = minutes later no incoming
> > traffic is getting to the server. If i = ping the machine, or telnet to
> > it, I get nothing. If I go to the terminal = and ping anything then it
> > "wakes up" does anyone have any = idea what would cause it to stop
> > "listening" to incoming network = requests? This is becoming very
> > tiresome and i've done everything known to = me.
>
>
> What does /var/log/messages say?
>
>
> To Unsubscribe: send mail to = majordomo@FreeBSD.org
> with "unsubscribe freebsd-isp" in the = body of the message

--
George Lewis
http://schvin.net/

------_=_NextPart_001_01C05EF3.05FC8CF8-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 12:11: 6 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 12:11:04 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.gtw.net (mail.gtw.net [208.33.253.12]) by hub.freebsd.org (Postfix) with SMTP id 1556F37B400 for ; Tue, 5 Dec 2000 12:11:04 -0800 (PST) Received: (qmail 24792 invoked from network); 5 Dec 2000 20:13:24 -0000 Received: from 30.pm3.gtw.net (HELO w1) (63.161.82.30) by mail.gtw.net with SMTP; 5 Dec 2000 20:13:24 -0000 Reply-To: From: "John Brooks" To: "'Drew J. Weaver'" , Subject: RE: Really odd problem Date: Tue, 5 Dec 2000 14:09:33 -0600 Message-ID: <000d01c05ef7$4c55d340$0b00a8c0@dle> X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Importance: Normal In-Reply-To: Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Just a thought, is the bios putting the hard drive into suspend mode? Or maybe the power management "system" is turing off some hardware devices into sleep mode and one of them happens to be the NIC card? Maybe check to see if the connection led is green on the card when it's offline and if it turns on after you access the NIC from the console. Check you bios settings? Anyway it's just a guess, YMMV. -- John Brooks Email: john@day-light.com -----Original Message----- From: owner-freebsd-isp@FreeBSD.ORG [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Drew J. Weaver Sent: Tuesday, December 05, 2000 1:05 PM To: 'freebsd-isp@freebsd.org' Subject: Really odd problem We have a Freebsd 4.2 box on our network, after the box boots, it brings up the network and everything is great, I can telnet into it.. everything good, but about 30-60 minutes later no incoming traffic is getting to the server. If i ping the machine, or telnet to it, I get nothing. If I go to the terminal and ping anything then it "wakes up" does anyone have any idea what would cause it to stop "listening" to incoming network requests? This is becoming very tiresome and i've done everything known to me. Thanks, -Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 12:12:51 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 12:12:47 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from theartofwar.org (216-161-146-58.customers.uswest.net [216.161.146.58]) by hub.freebsd.org (Postfix) with SMTP id D569337B404 for ; Tue, 5 Dec 2000 12:12:46 -0800 (PST) Received: (qmail 1042 invoked by uid 1001); 5 Dec 2000 20:12:46 -0000 Date: Tue, 5 Dec 2000 13:12:46 -0700 From: suntzu To: "Drew J. Weaver" Cc: 'George Lewis' , "'freebsd-isp@freebsd.org'" Subject: Re: FW: Really odd problem Message-ID: <20001205131246.A4513@theartofwar.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from drew.weaver@thenap.com on Tue, Dec 05, 2000 at 02:39:03PM -0500 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I used to have the same problem with FreeBSD and OpenBSD boxes I used. after 30-60 min, the system stop responding for any incoming traffic. No error message recorded (/var/log/messages or anywhere). I fixed the problem by playing around with the ethernet cable (and ethernet port on the switch - we use cheap netgear 8 port switch). Somehow after changing the ethernet cable + changing the port on the switch, it works without any problem. You might want to try to use another ethernet cable. I have no idea why/how, but it does work on me. Good luck, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 14: 9:10 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 14:09:06 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mailman.thenap.com (mailman.thenap.com [209.190.0.10]) by hub.freebsd.org (Postfix) with ESMTP id 280F737B404 for ; Tue, 5 Dec 2000 14:09:06 -0800 (PST) Received: by mailman.thenap.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 17:19:21 -0500 Message-ID: From: "Drew J. Weaver" To: 'suntzu' Cc: 'George Lewis' , "'freebsd-isp@freebsd.org'" Subject: RE: FW: Really odd problem Date: Tue, 5 Dec 2000 17:19:21 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05F09.6A6D0D50" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05F09.6A6D0D50 Content-Type: text/plain; charset="iso-8859-1" I've switched out cables, moved it to a different port on the switch and I have disabled any kind of wake-on lan, apci, powersaving or anything, yet it still does this =( Does ANYONE have ANY idea what I should do? -Drew -----Original Message----- From: suntzu [mailto:suntzu@theartofwar.org] Sent: Tuesday, December 05, 2000 3:13 PM To: Drew J. Weaver Cc: 'George Lewis'; 'freebsd-isp@freebsd.org' Subject: Re: FW: Really odd problem I used to have the same problem with FreeBSD and OpenBSD boxes I used. after 30-60 min, the system stop responding for any incoming traffic. No error message recorded (/var/log/messages or anywhere). I fixed the problem by playing around with the ethernet cable (and ethernet port on the switch - we use cheap netgear 8 port switch). Somehow after changing the ethernet cable + changing the port on the switch, it works without any problem. You might want to try to use another ethernet cable. I have no idea why/how, but it does work on me. Good luck, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message ------_=_NextPart_001_01C05F09.6A6D0D50 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: FW: Really odd problem

I've switched out cables, moved it to a different = port on the switch and I have disabled any kind of wake-on lan, apci, = powersaving or anything, yet it still does this =3D( Does ANYONE have = ANY idea what I should do?

-Drew


-----Original Message-----
From: suntzu [mailto:suntzu@theartofwar.org= ]
Sent: Tuesday, December 05, 2000 3:13 PM
To: Drew J. Weaver
Cc: 'George Lewis'; 'freebsd-isp@freebsd.org'
Subject: Re: FW: Really odd problem


I used to have the same problem with FreeBSD and = OpenBSD boxes I used.
after 30-60 min, the system stop responding for any = incoming traffic.
No error message recorded (/var/log/messages or = anywhere).

I fixed the problem by playing around with the = ethernet cable (and ethernet port on the switch - we use cheap netgear = 8 port switch). Somehow after changing the ethernet cable + changing = the port on the switch, it works without any problem.

You might want to try to use another ethernet cable. = I have no idea why/how, but it does work on me.

Good luck,



To Unsubscribe: send mail to = majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body = of the message

------_=_NextPart_001_01C05F09.6A6D0D50-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 14:59:24 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 14:59:21 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.gtw.net (mail.gtw.net [208.33.253.12]) by hub.freebsd.org (Postfix) with SMTP id C24FB37B400 for ; Tue, 5 Dec 2000 14:59:20 -0800 (PST) Received: (qmail 13364 invoked from network); 5 Dec 2000 23:01:41 -0000 Received: from 30.pm3.gtw.net (HELO w1) (63.161.82.30) by mail.gtw.net with SMTP; 5 Dec 2000 23:01:41 -0000 Reply-To: From: "John Brooks" To: "'Drew J. Weaver'" , "'freebsd-isp@freebsd.org'" Subject: RE: FW: Really odd problem Date: Tue, 5 Dec 2000 16:57:50 -0600 Message-ID: <001301c05f0e$cd81f180$0b00a8c0@dle> X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Importance: Normal In-Reply-To: Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Try replacing the NIC card with a different model, or from a different manufacturer. Then you will know if it is a specific NIC card problem or not. Try using a different pci slot. What NIC are you using? What motherboard? What does ifconfig -a show? -- John Brooks Email: john@day-light.com -----Original Message----- From: owner-freebsd-isp@FreeBSD.ORG [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Drew J. Weaver Sent: Tuesday, December 05, 2000 4:19 PM To: 'suntzu' Cc: 'George Lewis'; 'freebsd-isp@freebsd.org' Subject: RE: FW: Really odd problem I've switched out cables, moved it to a different port on the switch and I have disabled any kind of wake-on lan, apci, powersaving or anything, yet it still does this =( Does ANYONE have ANY idea what I should do? -Drew -----Original Message----- From: suntzu [mailto:suntzu@theartofwar.org] Sent: Tuesday, December 05, 2000 3:13 PM To: Drew J. Weaver Cc: 'George Lewis'; 'freebsd-isp@freebsd.org' Subject: Re: FW: Really odd problem I used to have the same problem with FreeBSD and OpenBSD boxes I used. after 30-60 min, the system stop responding for any incoming traffic. No error message recorded (/var/log/messages or anywhere). I fixed the problem by playing around with the ethernet cable (and ethernet port on the switch - we use cheap netgear 8 port switch). Somehow after changing the ethernet cable + changing the port on the switch, it works without any problem. You might want to try to use another ethernet cable. I have no idea why/how, but it does work on me. Good luck, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 16:39:24 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 16:39:19 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mailman.thenap.com (mailman.thenap.com [209.190.0.10]) by hub.freebsd.org (Postfix) with ESMTP id 0759B37B400 for ; Tue, 5 Dec 2000 16:39:18 -0800 (PST) Received: by mailman.thenap.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 19:49:33 -0500 Message-ID: From: "Drew J. Weaver" To: 'John Brooks ' , "''freebsd-isp@freebsd.org' '" Subject: RE: FW: Really odd problem Date: Tue, 5 Dec 2000 19:49:33 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05F1E.6659B8AC" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05F1E.6659B8AC Content-Type: text/plain; charset="iso-8859-1" I've used both a PCI Combo 10/100 Intel card and an Onboard Intel 10mb card. I'm going to build a completely new box with a 3com nic. -Drew -----Original Message----- From: John Brooks To: Drew J. Weaver; 'freebsd-isp@freebsd.org' Sent: 12/5/00 5:57 PM Subject: RE: FW: Really odd problem Try replacing the NIC card with a different model, or from a different manufacturer. Then you will know if it is a specific NIC card problem or not. Try using a different pci slot. What NIC are you using? What motherboard? What does ifconfig -a show? -- John Brooks Email: john@day-light.com -----Original Message----- From: owner-freebsd-isp@FreeBSD.ORG [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Drew J. Weaver Sent: Tuesday, December 05, 2000 4:19 PM To: 'suntzu' Cc: 'George Lewis'; 'freebsd-isp@freebsd.org' Subject: RE: FW: Really odd problem I've switched out cables, moved it to a different port on the switch and I have disabled any kind of wake-on lan, apci, powersaving or anything, yet it still does this =( Does ANYONE have ANY idea what I should do? -Drew -----Original Message----- From: suntzu [mailto:suntzu@theartofwar.org] Sent: Tuesday, December 05, 2000 3:13 PM To: Drew J. Weaver Cc: 'George Lewis'; 'freebsd-isp@freebsd.org' Subject: Re: FW: Really odd problem I used to have the same problem with FreeBSD and OpenBSD boxes I used. after 30-60 min, the system stop responding for any incoming traffic. No error message recorded (/var/log/messages or anywhere). I fixed the problem by playing around with the ethernet cable (and ethernet port on the switch - we use cheap netgear 8 port switch). Somehow after changing the ethernet cable + changing the port on the switch, it works without any problem. You might want to try to use another ethernet cable. I have no idea why/how, but it does work on me. Good luck, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message ------_=_NextPart_001_01C05F1E.6659B8AC Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: FW: Really odd problem

I've used both a PCI Combo 10/100 Intel card and an = Onboard Intel 10mb card. I'm going to build a completely new box with a = 3com nic.

-Drew


-----Original Message-----
From: John Brooks
To: Drew J. Weaver; 'freebsd-isp@freebsd.org'
Sent: 12/5/00 5:57 PM
Subject: RE: FW: Really odd problem

Try replacing the NIC card with a different model, or = from a different
manufacturer. Then you will know if it is a specific = NIC card problem or
not. Try using a different pci slot. What NIC are = you using? What
motherboard? What does ifconfig -a show?

--
John Brooks
Email:  john@day-light.com


-----Original Message-----
From: owner-freebsd-isp@FreeBSD.ORG
[mailto:owner-freebsd-isp@F= reeBSD.ORG]On Behalf Of Drew J. Weaver
Sent: Tuesday, December 05, 2000 4:19 PM
To: 'suntzu'
Cc: 'George Lewis'; 'freebsd-isp@freebsd.org'
Subject: RE: FW: Really odd problem


I've switched out cables, moved it to a different = port on the switch and
I
have disabled any kind of wake-on lan, apci, = powersaving or anything,
yet it
still does this =3D( Does ANYONE have ANY idea what = I should do?
-Drew


-----Original Message-----
From: suntzu [mailto:suntzu@theartofwar.org= ]
Sent: Tuesday, December 05, 2000 3:13 PM
To: Drew J. Weaver
Cc: 'George Lewis'; 'freebsd-isp@freebsd.org'
Subject: Re: FW: Really odd problem


I used to have the same problem with FreeBSD and = OpenBSD boxes I used.
after 30-60 min, the system stop responding for any = incoming traffic.
No error message recorded (/var/log/messages or = anywhere).
I fixed the problem by playing around with the = ethernet cable (and
ethernet
port on the switch - we use cheap netgear 8 port = switch). Somehow after
changing the ethernet cable + changing the port on = the switch, it works
without any problem.
You might want to try to use another ethernet cable. = I have no idea
why/how,
but it does work on me.
Good luck,



To Unsubscribe: send mail to = majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body = of the message




To Unsubscribe: send mail to = majordomo@FreeBSD.org
with "unsubscribe freebsd-isp" in the body = of the message

------_=_NextPart_001_01C05F1E.6659B8AC-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 21:15:19 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 21:15:17 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from misery.sdf.com (misery.sdf.com [204.244.213.49]) by hub.freebsd.org (Postfix) with ESMTP id A78E537B400 for ; Tue, 5 Dec 2000 21:15:15 -0800 (PST) Received: from tom (helo=localhost) by misery.sdf.com with local-esmtp (Exim 2.12 #1) id 143WF6-00052Q-00; Tue, 5 Dec 2000 20:31:44 -0800 Date: Tue, 5 Dec 2000 20:31:41 -0800 (PST) From: Tom Samplonius To: "Drew J. Weaver" Cc: "'freebsd-isp@freebsd.org'" Subject: Re: Really odd problem In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, 5 Dec 2000, Drew J. Weaver wrote: > We have a Freebsd 4.2 box on our network, after the box boots, it > brings up the network and everything is great, I can telnet into it.. > everything good, but about 30-60 minutes later no incoming traffic is > getting to the server. If i ping the machine, or telnet to it, I get > nothing. If I go to the terminal and ping anything then it "wakes up" does > anyone have any idea what would cause it to stop "listening" to incoming > network requests? This is becoming very tiresome and i've done everything > known to me. Well, if you rule any issues on the host, it could be a network issue. If you are using a ethernet switch, make sure the switch is broadcasting unknown traffic to the port your server is connected to. That is the default mode of operation on all switches, but it can be disabled on some. The switch uses a table of MAC -> port mappings that it builds by examining traffic. It ages entries out of the table (ie. 30 to 60 minutes). Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Tue Dec 5 23:55:26 2000 From owner-freebsd-isp@FreeBSD.ORG Tue Dec 5 23:55:24 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from saturn.futuredesigns.net (unknown [216.91.66.1]) by hub.freebsd.org (Postfix) with SMTP id C9CE537B400 for ; Tue, 5 Dec 2000 23:55:23 -0800 (PST) Received: (qmail 32687 invoked from network); 6 Dec 2000 07:55:23 -0000 Received: from sun.futuredesigns.net (HELO SUN.fdhosting.com) (216.91.66.69) by 216.91.66.2 with SMTP; 6 Dec 2000 07:55:23 -0000 Message-Id: <4.3.2.7.2.20001206025552.02e79f98@mail.futuredesigns.net> X-Sender: sturdee@mail.futuredesigns.net X-Mailer: QUALCOMM Windows Eudora Version 4.3.2 Date: Wed, 06 Dec 2000 02:56:06 -0500 To: freebsd-isp@freebsd.org From: Mike Subject: OT: gdbm Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Quick off topic question: Would it be better/faster to pull configuration for a C or PHP cgi from a text file, or GDBM db? The program will be accessed over 200,000/day, so speed and reliability is a concern. Thanks, Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 1:48:41 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 01:48:39 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from puce.hipo.lv (unknown [159.148.130.6]) by hub.freebsd.org (Postfix) with ESMTP id E5A1637B400 for ; Wed, 6 Dec 2000 01:48:37 -0800 (PST) Received: from hipo.lv ([192.168.0.53]) by puce.hipo.lv (Netscape Messaging Server 4.15) with ESMTP id G5577I00.QYR; Wed, 6 Dec 2000 11:45:18 +0100 Message-ID: <3A2E96EA.8CFCD5E@hipo.lv> Date: Wed, 06 Dec 2000 11:43:38 -0800 From: "Uldis Kuplis" Organization: LHZB X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: uktests@yahoo.com Subject: sendmail Content-Type: text/plain; charset=iso-8859-4 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! How can I denied to relay spams? My users dialing to e-mail server and therefore they has undeterminated IP adresses. I can't use /etc/mail/access How can I set up my BSD box to relay all adreses where "FROM:" is any@ my.domain.com ? regards, Uldis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 3:32:38 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 03:32:36 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from calulu.shearer.org (unknown [139.130.30.173]) by hub.freebsd.org (Postfix) with ESMTP id 3016E37B400 for ; Wed, 6 Dec 2000 03:32:35 -0800 (PST) Received: from calulu.shearer.org ([192.168.1.1]) by calulu.shearer.org with esmtp (Exim 3.12 #1) id 143cmN-0002AL-00 for freebsd-isp@freebsd.org; Wed, 06 Dec 2000 22:00:31 +1030 Date: Wed, 6 Dec 2000 22:00:31 +1030 (CST) From: Dan Shearer To: freebsd-isp@freebsd.org Subject: Dynamic routing reference sites Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am looking for people who use BGB (or Zebra) on FreeBSD to do dynamic routing in non-trivial networks, ie networks where most people would go and buy a Cisco xxx. I am aware of some sites in Canada and South Africa, and some Linux sites, but I'd like to know about FreeBSD. I will summarise to the list. Thanks. -- Dan Shearer Open Source Manager dan@tellurian.com.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 7:50:21 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 07:50:20 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ns1.i-p-d.nl (ns1.i-p-d.nl [208.239.240.129]) by hub.freebsd.org (Postfix) with ESMTP id 7761A37B400 for ; Wed, 6 Dec 2000 07:50:18 -0800 (PST) Received: from danny (xs02-068.support.nl [195.114.229.68]) by ns1.i-p-d.nl (8.9.3/8.9.3) with ESMTP id QAA01983 for ; Wed, 6 Dec 2000 16:45:03 +0100 (CET) (envelope-from danny@i-p-d.nl) From: danny@i-p-d.nl To: freebsd-isp@freebsd.org Date: Wed, 6 Dec 2000 16:49:52 +0100 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: dd + larger disk Message-ID: <3A2E6E30.14565.702DCF@localhost> Priority: normal X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org First of all dd works fine. To make things more interesting: I have some machines with a 10 GB harddisk. I do a dd to a 30 GB harddisk. The system works, but only as a 10 GB harddisk. (all are dangerous created disks) When I try to add a slice and reboot (I do set the original slice as bootable), I get the message that the partition doesn't work. When I set the disk as second behind the original one, I can delete the slice and boot again from the new disk. I just can't get the 20GB diskspace working. I hope anyone can help me! Met vriendelijke groeten, Danny Zwegers Unix SysAdmin (Spec:Domains) IPD Hosting & Design BV ------------------- WWW Hosting --------------------- http://www.i-p-d.nl Tel: 0165-571675 http://www.ipdhosting.com Fax: 0165-571710 http://www.domeinhosting.com Email: danny@i-p-d.nl http://www.secure.nl ------------------- WWW Design --------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 8:10:23 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 08:10:21 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ns1.officeonweb.net (ns1.officeonweb.net [209.61.157.241]) by hub.freebsd.org (Postfix) with ESMTP id 8F92837B400 for ; Wed, 6 Dec 2000 08:10:20 -0800 (PST) Received: from sami002 ([199.239.2.143]) by ns1.officeonweb.net (8.9.3/8.9.3) with SMTP id JAA00725; Wed, 6 Dec 2000 09:10:07 -0700 (MST) (envelope-from mdickerson@officeonweb.net) Message-Id: <3.0.6.32.20001206090830.007ca480@officeonweb.net> X-Sender: succes03@officeonweb.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Wed, 06 Dec 2000 09:08:30 -0700 To: "Uldis Kuplis" From: mdickerson@officeonweb.net Subject: Re: sendmail Cc: freebsd-isp@freebsd.org In-Reply-To: <3A2E96EA.8CFCD5E@hipo.lv> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Uldis, I'm using 'pop_auth'. Basically, it uses a perl script to constantly modify a database of accepted IP's to accept relaying from. When someone authenticates using their pop daemon, their ip is added to acceptable relays for 5 minutes. I couldn't find the exact one I'm using on the sendmail site, but the a different version (that appears to do the same thing, more or less) is here (and you must modify your /etc/sendmail.cf - I forget if I had to rebuild the .cf): http://www.sendmail.org/~ca/email/chk-opt.html#_POPAUTH_ I use 'poprelayd' that I found from sourceforge.net with a modified script (thanks to Sheldon Hearn) for cucipop (again, I couldn't find the exact one on sendmail site, but the link above seems to work pretty much the same). I'm interested in what others are doing (if there are other solutions). I couldn't get smtp_auth to work with sendmail 8.11.1 but that was a while ago (haven't tried since the last postings of the smtp_auth issues a week ago or so). There are other issues to deal with if one goes that route though (issues for me anyway, both good and bad). Hope this helps, Mike Dickerson OfficeOnWeb.net At 11:43 AM 12/6/00 -0800, you wrote: >Hi! > >How can I denied to relay spams? >My users dialing to e-mail server and therefore they has undeterminated >IP adresses. I can't use /etc/mail/access >How can I set up my BSD box to relay all adreses where >"FROM:" is any@ my.domain.com ? > >regards, Uldis > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 8:10:32 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 08:10:29 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from bilver.wjv.com (dhcp-1-60.n01.orldfl01.us.ra.verio.net [157.238.210.60]) by hub.freebsd.org (Postfix) with ESMTP id B1A1E37B400 for ; Wed, 6 Dec 2000 08:10:27 -0800 (PST) Received: (from bill@localhost) by bilver.wjv.com (8.9.3/8.9.3) id LAA16822 for freebsd-isp@freebsd.org; Wed, 6 Dec 2000 11:10:25 -0500 (EST) (envelope-from bill) Date: Wed, 6 Dec 2000 11:10:25 -0500 From: Bill Vermillion To: freebsd-isp@freebsd.org Subject: Re: dd + larger disk Message-ID: <20001206111025.A16633@wjv.com> Reply-To: bv@bilver.wjv.com References: <3A2E6E30.14565.702DCF@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A2E6E30.14565.702DCF@localhost>; from danny@i-p-d.nl on Wed, Dec 06, 2000 at 04:49:52PM +0100 Organization: W.J.Vermillion / Orlando - Winter Park Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, Dec 06, 2000 at 04:49:52PM +0100, danny@i-p-d.nl thus spoke: > First of all dd works fine. > To make things more interesting: I have some machines with a 10 > GB harddisk. I do a dd to a 30 GB harddisk. The system works, > but only as a 10 GB harddisk. (all are dangerous created disks) Yup. Because you have copied ALL the information about that drive to then new drive. > When I try to add a slice and reboot (I do set the original slice as > bootable), I get the message that the partition doesn't work. Because of the same answer above. > When I set the disk as second behind the original one, I can delete > the slice and boot again from the new disk. I just can't get the > 20GB diskspace working. > I hope anyone can help me! Trying to save time sometimes takes more time. Build a minimal system on the new 30GB drive, and then tar/cpio/pax/whatever each directory structure over. -- Bill Vermillion - bv @ wjv . com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 8:13:38 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 08:13:34 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from newcolo.invictanet.co.uk (newcolo.invictanet.co.uk [62.232.63.118]) by hub.freebsd.org (Postfix) with ESMTP id 4714637B400 for ; Wed, 6 Dec 2000 08:13:33 -0800 (PST) Received: from harryhome (modem441.netkonect.net [194.164.14.187]) (authenticated) by newcolo.invictanet.co.uk (8.11.1/8.11.1) with ESMTP id eB6GDUI78408 for ; Wed, 6 Dec 2000 16:13:30 GMT From: "InvictaNet Customer Support" To: "Freebsd-ISP" Subject: RE: sendmail Date: Wed, 6 Dec 2000 16:13:28 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 In-Reply-To: <3.0.6.32.20001206090830.007ca480@officeonweb.net> Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I now have smtp auth (sendmail 8.11.1)fully working, I think this is the way to try if you can because mail will go straight away instead of having to pop first to get into the database, then sending a second time (i think most clients send then receive) Martyn Routley ----------------------------------------------------- InvictaNet - The Internet in Plain English, Guaranteed http://www.invictanet.co.uk mailto:info@invictanet.co.uk phone: 0870 7402252 fax: +44 (0)1233 334001 ------------------------------------------------------ -----Original Message----- From: owner-freebsd-isp@FreeBSD.ORG [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of mdickerson@officeonweb.net Sent: Wednesday, December 06, 2000 4:09 PM To: Uldis Kuplis Cc: freebsd-isp@FreeBSD.ORG Subject: Re: sendmail Uldis, I'm using 'pop_auth'. Basically, it uses a perl script to constantly modify a database of accepted IP's to accept relaying from. When someone authenticates using their pop daemon, their ip is added to acceptable relays for 5 minutes. I couldn't find the exact one I'm using on the sendmail site, but the a different version (that appears to do the same thing, more or less) is here (and you must modify your /etc/sendmail.cf - I forget if I had to rebuild the .cf): http://www.sendmail.org/~ca/email/chk-opt.html#_POPAUTH_ I use 'poprelayd' that I found from sourceforge.net with a modified script (thanks to Sheldon Hearn) for cucipop (again, I couldn't find the exact one on sendmail site, but the link above seems to work pretty much the same). I'm interested in what others are doing (if there are other solutions). I couldn't get smtp_auth to work with sendmail 8.11.1 but that was a while ago (haven't tried since the last postings of the smtp_auth issues a week ago or so). There are other issues to deal with if one goes that route though (issues for me anyway, both good and bad). Hope this helps, Mike Dickerson OfficeOnWeb.net At 11:43 AM 12/6/00 -0800, you wrote: >Hi! > >How can I denied to relay spams? >My users dialing to e-mail server and therefore they has undeterminated >IP adresses. I can't use /etc/mail/access >How can I set up my BSD box to relay all adreses where >"FROM:" is any@ my.domain.com ? > >regards, Uldis > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 8:37:52 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 08:37:51 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from misery.sdf.com (misery.sdf.com [204.244.213.49]) by hub.freebsd.org (Postfix) with ESMTP id 22CBD37B400 for ; Wed, 6 Dec 2000 08:37:50 -0800 (PST) Received: from tom (helo=localhost) by misery.sdf.com with local-esmtp (Exim 2.12 #1) id 143gte-0005vh-00; Wed, 6 Dec 2000 07:54:18 -0800 Date: Wed, 6 Dec 2000 07:54:16 -0800 (PST) From: Tom Samplonius To: Mike Cc: freebsd-isp@freebsd.org Subject: Re: OT: gdbm In-Reply-To: <4.3.2.7.2.20001206025552.02e79f98@mail.futuredesigns.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 6 Dec 2000, Mike wrote: > Quick off topic question: > Would it be better/faster to pull configuration for a C or PHP cgi from a > text file, or GDBM db? The program will be accessed over 200,000/day, so > speed and reliability is a concern. If the program needs to read the entire configuration, there would be no difference because the entire file would need to read. Any kind of db only helps if you are retrieving data by key. The best things is to not use CGI at all (well with fastcgi, you could load the config just once). Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 8:54:57 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 08:54:56 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.tcworks.net (mail.tcworks.net [216.61.218.4]) by hub.freebsd.org (Postfix) with ESMTP id BBA7E37B400 for ; Wed, 6 Dec 2000 08:54:55 -0800 (PST) Received: from tcworks.net (stuck.sticky.org [216.61.218.6]) by mail.tcworks.net (8.9.3/8.9.3) with ESMTP id KAA03734 for ; Wed, 6 Dec 2000 10:52:30 -0600 (CST) (envelope-from ccook@tcworks.net) Sender: xcess@mail.tcworks.net Message-ID: <3A2E6FA9.B1BC46F3@tcworks.net> Date: Wed, 06 Dec 2000 10:56:09 -0600 From: Chris Cook X-Mailer: Mozilla 4.72 [en] (X11; I; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: [sendmail] Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Uldis Kuplis wrote: > > Hi! > > How can I denied to relay spams? > My users dialing to e-mail server and therefore they has undeterminated > IP adresses. I can't use /etc/mail/access > How can I set up my BSD box to relay all adreses where > "FROM:" is any@ my.domain.com ? http://www.sendmail.org/m4/anti-spam.html Look at "relay_local_from"... this is dangerous though, it opens a hole in your server for spammers and IS NOT ADVISED. -- Chris o----< ccook@tcworks.net >------------------------------------o |Chris Cook - Admin |TCWORKS.NET - http://www.tcworks.net | |The Computer Works ISP |FreeBSD - http://www.freebsd.org | o-------------------------------------------------------------o To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 9:14:37 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 09:14:34 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from bilver.wjv.com (dhcp-1-181.n01.orldfl01.us.ra.verio.net [157.238.210.181]) by hub.freebsd.org (Postfix) with ESMTP id A23D337B400 for ; Wed, 6 Dec 2000 09:14:32 -0800 (PST) Received: (from bill@localhost) by bilver.wjv.com (8.9.3/8.9.3) id MAA17649 for freebsd-isp@freebsd.org; Wed, 6 Dec 2000 12:14:31 -0500 (EST) (envelope-from bill) Date: Wed, 6 Dec 2000 12:14:29 -0500 From: Bill Vermillion To: freebsd-isp@freebsd.org Subject: Re: dd + larger disk Message-ID: <20001206121429.A17600@wjv.com> Reply-To: bv@bilver.wjv.com References: <20001206111025.A16633@wjv.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from matt@ARPA.MAIL.NET on Wed, Dec 06, 2000 at 11:13:33AM -0500 Organization: W.J.Vermillion / Orlando - Winter Park Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, Dec 06, 2000 at 11:13:33AM -0500, Matt Heckaman thus spoke: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > On Wed, 6 Dec 2000, Bill Vermillion wrote: > ... > : Trying to save time sometimes takes more time. > : > : Build a minimal system on the new 30GB drive, and then > : tar/cpio/pax/whatever each directory structure over. > Wouldn't it be possible to boot off a cd or somesort with a > formatted & partitioned disk and then mount the partitions and > do a dump over the network? I'm interested because I have to do > something like this in January with two machines. Don't see why not if you mean 'dump'. THe original poster was using dd - and transfering images. You don't want do that. So you could probably use your favorite backup tool and just run it over the network. You really want to move files and not images. Doing it this way will at least start you with a frech unfragmented file system. The original poster using dd would find that if he had a fragmented file system to start with he'd have the same. With Unix systems there are so many tools and the trick is knowing which tool to use for the job. dd would be my last choice for transfering data. But if you needed to clone several machine you could dupe the HDs and just pop them in new systems - if everything else matched. Gives you the software equivalent of the hardware drive duplicators. Bill has the > * Matt Heckaman - mailto:matt@lucida.qc.ca http://www.lucida.qc.ca/ * > * GPG fingerprint - A9BC F3A8 278E 22F2 9BDA BFCF 74C3 2D31 C035 5390 * > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.4 (FreeBSD) > Comment: http://www.lucida.qc.ca/pgp > > iD8DBQE6LmWudMMtMcA1U5ARAhhyAKCdsaEGwyYWnR6r9owUDiWlZTu8swCfbV1D > j1z82lgXOWPnVxBNNzOSHGY= > =qYiw > -----END PGP SIGNATURE----- > > > -- Bill Vermillion - bv @ wjv . com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 9:17:15 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 09:17:12 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from smtp2.amigo.net (smtp2.amigo.net [209.94.64.40]) by hub.freebsd.org (Postfix) with ESMTP id 764A437B400 for ; Wed, 6 Dec 2000 09:17:12 -0800 (PST) Received: from amigo.net ([209.94.67.250]) by smtp2.amigo.net (Post.Office MTA v3.1 release PO205b ID# 0-39855U5000L500S0) with ESMTP id AAA19679; Wed, 6 Dec 2000 10:16:59 -0700 Message-ID: <3A2E7493.3020106@amigo.net> Date: Wed, 06 Dec 2000 10:17:07 -0700 From: Randy Smith Organization: Amigo.Net User-Agent: Mozilla/5.0 (X11; U; FreeBSD 4.2-STABLE i386; en-US; m18) Gecko/20001015 X-Accept-Language: en MIME-Version: 1.0 To: Uldis Kuplis Cc: freebsd-isp@freebsd.org Subject: Re: sendmail References: <3A2E96EA.8CFCD5E@hipo.lv> Content-Type: text/plain; charset=ISO-8859-4; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Uldis Kuplis wrote: > Hi! > > How can I denied to relay spams? > My users dialing to e-mail server and therefore they has undeterminated > IP adresses. I can't use /etc/mail/access > How can I set up my BSD box to relay all adreses where > "FROM:" is any@ my.domain.com ? You can use the hosts.allow and restrict access to the range of IP addresses that your dialup users are assingned. For example, if your users are assigned addresses from the 192.168.1 class C, then you allow access from any IP in that class c and deny it from everywhere else. You definitely do NOT want to do base relay on the From: field. That is too easy to spoof. (If you want to know how, let me know and I'll send you instructions.) If you don't believe me, take a look at the spam you recieve and see how much of it claims to come from Yahoo when it actually comes from UU.net. > regards, Uldis -- Randy Smith Amigo.Net Webmaster 719-589-6100 ext. 4185 http://www.amigo.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 14:19:15 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 14:19:13 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from calulu.shearer.org (unknown [139.130.30.173]) by hub.freebsd.org (Postfix) with ESMTP id D85CB37B400 for ; Wed, 6 Dec 2000 14:19:12 -0800 (PST) Received: from calulu.shearer.org ([192.168.1.1]) by calulu.shearer.org with esmtp (Exim 3.12 #1) id 143ms8-0002uJ-00 for freebsd-isp@FreeBSD.ORG; Thu, 07 Dec 2000 08:47:08 +1030 Date: Thu, 7 Dec 2000 08:47:08 +1030 (CST) From: Dan Shearer To: freebsd-isp@FreeBSD.ORG Subject: Re: Dynamic routing reference sites In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 6 Dec 2000, Dan Shearer wrote: > I am looking for people who use BGB (or Zebra) on OpenBSD to do dynamic That was broken, wasn't it. Make that "BGP (gated or Zebra)". > I will summarise to the list. Thanks. Thanks for the replies so far. -- Dan Shearer Open Source Manager dan@tellurian.com.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 18: 7:37 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 18:07:35 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ren.sasknow.com (ren.sasknow.com [207.195.92.131]) by hub.freebsd.org (Postfix) with ESMTP id B324537B400 for ; Wed, 6 Dec 2000 18:07:33 -0800 (PST) Received: from localhost (ryan@localhost) by ren.sasknow.com (8.9.3/8.9.3) with ESMTP id UAA27156 for ; Wed, 6 Dec 2000 20:07:25 -0600 (CST) (envelope-from ryan@sasknow.com) Date: Wed, 6 Dec 2000 20:07:25 -0600 (CST) From: Ryan Thompson To: freebsd-isp@freebsd.org Subject: Annoying problem with apache-modssl certs Message-ID: Organization: SaskNow Technologies [www.sasknow.com] MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hey all... Hope someone has seen this before... I've got an apache-modssl server (apache 1.3.9, mod-ssl 2.4.9, openssl 0.9.4) running under FreeBSB 3.4. A default entry is configured, using "server.crt" and "server.key", on a default server name. www.virtual1.tld I successfully added one virtual host, "virtual1.crt" / "virtual2.key". (Yes, I use a better naming convention than this :-) Actually, that site has been up for a while. www.virtual2.tld Now, on the same server, I desired to add another virtual host. So, after generating the key, csr, and obtaining signed .crt (Thawte), as I have always done, and adding another virtual host entry on the same IP/port 443 in httpd.conf, and restarting the secure server, the following happens: When I access https://www.virtual2.tld/ , I see virtual1's certificate (i.e., the browser complains that the certificate is signed and valid, but the common name doesn't match the site name). In fact, the certificate is the one for www.virtual1.tld. https://www.virtual1.tld/ and the default server work fine. If I accept the certificate for virtual2.tld, I actually see the correct page for https://www.virtual2.tld/. (I.e., a static .html page containing "Welcome to www.virtual2.tld" :-) Thinking that a bit strange, I swapped the order of virtual1 and virtual2 sections. (So, virtual2 was listed first). The same thing happened, only differently :-) Accessing http://www.virtual2.tld/ (listed first in httpd.conf) correctly used virtual2.tld's certificate. Accessing http://www.virtual1.tld/ (listed last in httpd.conf) incorrectly used virtual1.tld's certificate. So, to sum this up, it appears as though: o My virtual host setup is correct insofar as apache will return the correct index page depending on the server name requested by the client. o Apache refuses to use anything but the FIRST certificate within the FIRST directive. Strange...? -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 18:20: 6 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 18:20:03 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from java.dpcsys.com (java.dpcsys.com [206.16.184.7]) by hub.freebsd.org (Postfix) with ESMTP id 65DFC37B400 for ; Wed, 6 Dec 2000 18:20:03 -0800 (PST) Received: from localhost (dan@localhost) by java.dpcsys.com (8.10.0.Beta12/8.10.0.Beta12) with SMTP id eB72KTV28691; Wed, 6 Dec 2000 18:20:29 -0800 (PST) Date: Wed, 6 Dec 2000 18:20:29 -0800 (PST) From: Dan Busarow To: Ryan Thompson Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Annoying problem with apache-modssl certs In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 6 Dec 2000, Ryan Thompson wrote: > Hey all... Hope someone has seen this before... > > I've got an apache-modssl server (apache 1.3.9, mod-ssl 2.4.9, openssl > 0.9.4) running under FreeBSB 3.4. > > A default entry is configured, using "server.crt" and "server.key", on a > default server name. > > www.virtual1.tld > I successfully added one virtual host, "virtual1.crt" / "virtual2.key". > (Yes, I use a better naming convention than this :-) Actually, that site > has been up for a while. > > www.virtual2.tld > Now, on the same server, I desired to add another virtual host. So, after > generating the key, csr, and obtaining signed .crt (Thawte), as I have > always done, and adding another virtual host entry on the same IP/port 443 > in httpd.conf, and restarting the secure server, the following happens: HTTPS does not support name based virtual hosts. You need to use unique IP addresses for each virtual when doing HTTPS. Nothing to do with Apache, mod_ssl or the ports. Dan -- Dan Busarow 949 443 4172 Dana Point Communications, Inc. dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 18:24:15 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 18:24:10 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from ren.sasknow.com (ren.sasknow.com [207.195.92.131]) by hub.freebsd.org (Postfix) with ESMTP id BEE8637B400 for ; Wed, 6 Dec 2000 18:24:09 -0800 (PST) Received: from localhost (ryan@localhost) by ren.sasknow.com (8.9.3/8.9.3) with ESMTP id UAA28234; Wed, 6 Dec 2000 20:24:02 -0600 (CST) (envelope-from ryan@sasknow.com) Date: Wed, 6 Dec 2000 20:24:02 -0600 (CST) From: Ryan Thompson To: Jim King Cc: freebsd-isp@freebsd.org Subject: Re: Annoying problem with apache-modssl certs In-Reply-To: <017001c05ff3$75efb7f0$04e48486@marble> Message-ID: Organization: SaskNow Technologies [www.sasknow.com] MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Jim King wrote to Ryan Thompson: > This is a limitation of SSL. Named virtual hosts and SSL don't mix. You > need to give SSL hosts unique IP's. Ha! Yes, believe it or not, I knew this... I suppose the reason I've never encountered this problem is because, until now, different SSL hosts have always been on different IPs :-) Thanks, Jim, and everyone that has already replied. - Ryan > > ----- Original Message ----- > From: "Ryan Thompson" > To: > Sent: Wednesday, December 06, 2000 8:07 PM > Subject: Annoying problem with apache-modssl certs > > > > > > Hey all... Hope someone has seen this before... > > > > I've got an apache-modssl server (apache 1.3.9, mod-ssl 2.4.9, openssl > > 0.9.4) running under FreeBSB 3.4. > > > > A default entry is configured, using "server.crt" and "server.key", on a > > default server name. > > > > www.virtual1.tld > > I successfully added one virtual host, "virtual1.crt" / "virtual2.key". > > (Yes, I use a better naming convention than this :-) Actually, that site > > has been up for a while. > > > > www.virtual2.tld > > Now, on the same server, I desired to add another virtual host. So, after > > generating the key, csr, and obtaining signed .crt (Thawte), as I have > > always done, and adding another virtual host entry on the same IP/port 443 > > in httpd.conf, and restarting the secure server, the following happens: > > > > When I access https://www.virtual2.tld/ , I see virtual1's certificate > > (i.e., the browser complains that the certificate is signed and valid, but > > the common name doesn't match the site name). In fact, the certificate is > > the one for www.virtual1.tld. > > > > https://www.virtual1.tld/ and the default server work fine. > > > > If I accept the certificate for virtual2.tld, I actually see the correct > > page for https://www.virtual2.tld/. (I.e., a static .html page containing > > "Welcome to www.virtual2.tld" :-) > > > > Thinking that a bit strange, I swapped the order of virtual1 and virtual2 > > sections. (So, virtual2 was > > listed first). The same thing happened, only differently :-) > > > > Accessing http://www.virtual2.tld/ (listed first in httpd.conf) correctly > > used virtual2.tld's certificate. > > > > Accessing http://www.virtual1.tld/ (listed last in httpd.conf) incorrectly > > used virtual1.tld's certificate. > > > > > > So, to sum this up, it appears as though: > > o My virtual host setup is correct insofar as apache will > > return the correct index page depending on the server > > name requested by the client. > > o Apache refuses to use anything but the FIRST certificate > > within the FIRST directive. > > > > Strange...? > > > > -- > > Ryan Thompson > > Network Administrator, Accounts > > > > SaskNow Technologies - http://www.sasknow.com > > #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 > > > > Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon > > Toll-Free: 877-727-5669 (877-SASKNOW) North America > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-isp" in the body of the message > > > > -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 20: 9: 5 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 20:09:01 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id 2225B37B400 for ; Wed, 6 Dec 2000 20:09:01 -0800 (PST) Received: from chimp.simianscience.com (cage.simianscience.com [64.7.134.1]) by smtp1.sentex.ca (8.11.1/8.11.1) with SMTP id eB747oh88214; Wed, 6 Dec 2000 23:08:03 -0500 (EST) (envelope-from mike@sentex.net) From: Mike Tancsa To: dan@tellurian.com.au (Dan Shearer) Cc: freebsd-isp@freebsd.org Subject: Re: Dynamic routing reference sites Date: Wed, 06 Dec 2000 23:07:50 -0500 Message-ID: References: In-Reply-To: X-Mailer: Forte Agent 1.8/32.548 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 6 Dec 2000 17:19:21 -0500, in sentex.lists.freebsd.isp you wrote: >On Wed, 6 Dec 2000, Dan Shearer wrote: >=20 >> I am looking for people who use BGB (or Zebra) on OpenBSD to do = dynamic >=20 >That was broken, wasn't it. Make that "BGP (gated or Zebra)". Apart from the above web sites, I dont know of any specific references = per se. The main source I used was "Internet Routing Architectures" ISBN 157870233X (Second edition) to learn and understand routing at a = conceptual level. Once you have that, its not that difficult to get gated working = as you require. Respective mailing list archives are also very handy. = Also, the nice thing about Zebra is that the commands are very similar to what you would do in a Cisco. ---Mike Mike Tancsa (mdtancsa@sentex.net) =09 Sentex Communications Corp, =09 Waterloo, Ontario, Canada "Given enough time, 100 monkeys on 100 routers=20 could setup a national IP network." (KDW2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 20:45:12 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 20:45:10 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from calulu.shearer.org (unknown [139.130.30.173]) by hub.freebsd.org (Postfix) with ESMTP id C2B1A37B400 for ; Wed, 6 Dec 2000 20:45:09 -0800 (PST) Received: from calulu.shearer.org ([192.168.1.1]) by calulu.shearer.org with esmtp (Exim 3.12 #1) id 143stS-0003JQ-00; Thu, 07 Dec 2000 15:12:54 +1030 Date: Thu, 7 Dec 2000 15:12:53 +1030 (CST) From: Dan Shearer To: Mike Tancsa Cc: freebsd-isp@freebsd.org Subject: Re: Dynamic routing reference sites In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 6 Dec 2000, Mike Tancsa wrote: > Apart from the above web sites, I dont know of any specific references per > se. The main source I used was "Internet Routing Architectures" ISBN > 157870233X (Second edition) to learn and understand routing at a conceptual > level. Once you have that, its not that difficult to get gated working as > you require. Respective mailing list archives are also very handy. Also, > the nice thing about Zebra is that the commands are very similar to what > you would do in a Cisco. I take it you run a non-trivial network using FreeBSD and one of gated or Zebra. What would you say to the common contention that Cisco hardware is exceedingly reliable (which is true, from my experience and that of many others) and that therefore PC-based hardware cannot compare to a Cisco when used for a border router. I keep thinking of quality PCs that are used in industrial applications for example, and in space missions and military tanks. It's pretty good hardware and it isn't good when a fan stops. It seems to me that a competent Unix sysadmin can gain real control by using a full Unix machine (well, a carefully secured Unix machine) as a border router. But many very competent Unix sysadmins disagree with comments along the line of "why bother". I have certainly seen networks wallowing helplessly because Cisco (and Bay, now Nortel) routers were misbehaving from a software perspective. I don't think Cisco has anything much to offer software-wise except a nice command interface and many manuals. Any comments? -- Dan Shearer Open Source Manager dan@tellurian.com.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 21: 7:47 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 21:07:44 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail1.netsol.net (mail.netsol.net [216.179.148.10]) by hub.freebsd.org (Postfix) with ESMTP id C847337B400 for ; Wed, 6 Dec 2000 21:07:44 -0800 (PST) Received: from fire ([63.194.3.101]) by mail1.netsol.net (Post.Office MTA v3.5.3 release 223 ID# 0-12345L500S10000V35) with SMTP id net; Wed, 6 Dec 2000 21:12:37 -0800 Message-ID: <001f01c0600b$aaf4f1a0$6503c23f@XGforce.com> Reply-To: "jl" From: "jl" To: , References: <3A2E6E30.14565.702DCF@localhost> Subject: Re: dd + larger disk Date: Wed, 6 Dec 2000 21:07:59 -0800 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You may want to use ufsdump or tar to dup disk, instead of dd which will copy disk lables and the boot sectors all togather. Unless you can edit your boot sector and the lables. ====================================== WWW.XGFORCE.COM The Next Generation Load Balance and Fail Safe Server Clustering Software for the Internet. ====================================== ----- Original Message ----- From: To: Sent: Wednesday, December 06, 2000 7:49 AM Subject: dd + larger disk > First of all dd works fine. > > To make things more interesting: I have some machines with a 10 > GB harddisk. I do a dd to a 30 GB harddisk. The system works, > but only as a 10 GB harddisk. (all are dangerous created disks) > > When I try to add a slice and reboot (I do set the original slice as > bootable), I get the message that the partition doesn't work. > > When I set the disk as second behind the original one, I can delete > the slice and boot again from the new disk. I just can't get the > 20GB diskspace working. > > I hope anyone can help me! > > > Met vriendelijke groeten, > > Danny Zwegers > Unix SysAdmin (Spec:Domains) > IPD Hosting & Design BV > > ------------------- WWW Hosting --------------------- > http://www.i-p-d.nl Tel: 0165-571675 > http://www.ipdhosting.com Fax: 0165-571710 > http://www.domeinhosting.com Email: danny@i-p-d.nl > http://www.secure.nl > ------------------- WWW Design --------------------- > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Wed Dec 6 21:36:54 2000 From owner-freebsd-isp@FreeBSD.ORG Wed Dec 6 21:36:51 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from cage.simianscience.com (cage.simianscience.com [64.7.134.1]) by hub.freebsd.org (Postfix) with ESMTP id 0263E37B400 for ; Wed, 6 Dec 2000 21:36:50 -0800 (PST) Received: from chimp (fcage [192.168.0.2]) by cage.simianscience.com (8.11.1/8.11.1) with ESMTP id eB75acM37435; Thu, 7 Dec 2000 00:36:39 -0500 (EST) (envelope-from mike@sentex.net) Message-Id: <4.2.2.20001206234605.01959ed8@marble.sentex.net> X-Sender: mdtancsa@marble.sentex.net X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Thu, 07 Dec 2000 00:36:38 -0500 To: Dan Shearer From: Mike Tancsa Subject: Re: Dynamic routing reference sites Cc: freebsd-isp@freebsd.org In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 03:12 PM 12/7/2000 +1030, Dan Shearer wrote: >I take it you run a non-trivial network using FreeBSD and one of gated or >Zebra. Not sure what the definition of non-trivial is... I have 4 eBGP peers, 2 full views. OSPF inside on 6 routers. I am AS11647 >What would you say to the common contention that Cisco hardware is >exceedingly reliable (which is true, from my experience and that of many >others) and that therefore PC-based hardware cannot compare to a Cisco >when used for a border router. I keep thinking of quality PCs that are >used in industrial applications for example, and in space missions and >military tanks. It's pretty good hardware and it isn't good when a fan >stops. For my ATM gear, I use Cisco. The switches are on 4hr smartnet contract (not cheap). Even so, I doubt if the device failed, I would see a replacement unit in 4hrs, since its a good 2hr drive from the city where they are stored. In the best of circumstances and unless they have ambulance like deployment, I doubt they would be here for a good 6hrs at least. Having a idle replacement unit sitting here is quite expensive... At some point we will be able to justify it, but it does cost a lot. For my border routers, having a cold swap PC sitting around doing nothing ready to be deployed is VERY cheap by comparison.... So it comes down to a calculated risk. Given your network, can you cost justify the Cisco gear ? If yes, then go with the Cisco. If no, go with the PC solution. >It seems to me that a competent Unix sysadmin can gain real control by >using a full Unix machine (well, a carefully secured Unix machine) as a >border router. But many very competent Unix sysadmins disagree with >comments along the line of "why bother". >I have certainly seen networks wallowing helplessly because Cisco (and >Bay, now Nortel) routers were misbehaving from a software perspective. I >don't think Cisco has anything much to offer software-wise except a nice >command interface and many manuals. Yes and no. IOS will give you a LOT more features than Zebra and gated will.... BUT, do you need those features for your application ? Also, if your organization is 'gated'ified' or 'zebraized', and you have one person who knows it all, what do you do if he/she leaves ? If you have Cisco gear, you have options in terms of support... You can call up Cisco and buy the solution. For some organizations, this is quite important. Furthermore, you can send people on any number of courses to be trained to operate cisco gear. Again, for some organizations this is important, for others, it does not matter. ---Mike -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Network Administration, mike@sentex.net Sentex Communications www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 0:19:43 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 00:19:41 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from inter.stack.ru (inter.stack.ru [212.20.57.225]) by hub.freebsd.org (Postfix) with ESMTP id 438C737B401 for ; Thu, 7 Dec 2000 00:19:39 -0800 (PST) Received: from exch.stack.ru (exch.stack.ru [212.20.57.217]) by inter.stack.ru (8.9.3/8.9.3) with ESMTP id PAA08310 for ; Thu, 7 Dec 2000 15:17:51 +0700 (KRS) Received: by exch.stack.ru with Internet Mail Service (5.5.2448.0) id ; Thu, 7 Dec 2000 15:19:29 +0700 Message-ID: <3A99BABAB2C2D411B1540050DACC35FE4254@exch.stack.ru> From: "Tolpanov, Dmitry" To: "'freebsd-isp@FreeBSD.ORG'" Subject: POP3 or IMAP. Date: Thu, 7 Dec 2000 15:19:28 +0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="koi8-r" Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi. We are prividing e-mail service. Our clients keep there mail on the FreeBSD box and get mail using POP3. We know that our POP3 server (popper) use plaintext authentication and we don't like this. Now we have to find a good replacement for popper. It should: 1. Support more secure authentication; 2. Be supported by most e-mail clients. I think it will good enouth any server with APOP support, but I can't find any port for FreeBSD. May someone advice something. And another thing. As most of e-mail clients now support IMAP4 and as it is more progressive and promising may be it is good idea to install IMAP server. But I can't find what type of authentication it use. Any advise appreciated. Thanks. Dmitry. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 0:19:56 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 00:19:53 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mx1.unpar.ac.id (unknown [202.150.34.3]) by hub.freebsd.org (Postfix) with ESMTP id 54E7D37B401 for ; Thu, 7 Dec 2000 00:19:47 -0800 (PST) Received: from home.unpar.ac.id (root@home [202.150.34.12]) by mx1.unpar.ac.id (8.9.3/8.9.3) with ESMTP id PAA26315 for ; Thu, 7 Dec 2000 15:43:05 +0700 (JAVT) X-UNPAR-MX1-From: thomas@home.unpar.ac.id X-UNPAR-MX1-To: Received: from pelangi (h-041.bapsi [10.2.4.41] (may be forged)) by home.unpar.ac.id (8.9.3/8.9.3) with SMTP id PAA88412 for ; Thu, 7 Dec 2000 15:19:53 +0700 (JAVT) (envelope-from thomas@home.unpar.ac.id) Message-ID: <00fd01c06026$6e5594a0$2904020a@unpar.ac.id> From: "Thomas Wahyudi" To: "'freebsd-isp@freebsd.org'" References: Subject: Re: Really odd problem Date: Thu, 7 Dec 2000 15:19:33 +0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org have you try to remove options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN options TCP_RESTRICT_RST #restrict emission of TCP RST options ICMP_BANDLIM make sure you make clean first .. if it ok.. then add the options one at a time it works for me.. when using 4.0 Best regards, Thomas Wahyudi ======== UIN 535778 ----- Original Message ----- From: "Drew J. Weaver" > We have a Freebsd 4.2 box on our network, after the box boots, it > brings up the network and everything is great, I can telnet into it.. > everything good, but about 30-60 minutes later no incoming traffic is > getting to the server. If i ping the machine, or telnet to it, I get > nothing. If I go to the terminal and ping anything then it "wakes up" does > anyone have any idea what would cause it to stop "listening" to incoming > network requests? This is becoming very tiresome and i've done everything > known to me. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 1:23:18 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 01:23:16 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from christel.heitec.net (christel.heitec.net [193.101.232.3]) by hub.freebsd.org (Postfix) with ESMTP id 96B1C37B400 for ; Thu, 7 Dec 2000 01:22:44 -0800 (PST) Received: from tashi.admin.er.heitec.net (paladin.heitec.net [193.101.232.30]) by christel.heitec.net (Postfix) with ESMTP id 3D442354811 for ; Thu, 7 Dec 2000 10:28:30 +0100 (CET) Received: by tashi.admin.er.heitec.net (Postfix, from userid 1000) id 25C671DEA; Thu, 7 Dec 2000 10:24:33 +0100 (CET) Date: Thu, 7 Dec 2000 10:24:33 +0100 To: freebsd-isp@FreeBSD.ORG Subject: Re: POP3 or IMAP. Message-ID: <20001207102433.C2411@heitec.net> Mail-Followup-To: freebsd-isp@FreeBSD.ORG References: <3A99BABAB2C2D411B1540050DACC35FE4254@exch.stack.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A99BABAB2C2D411B1540050DACC35FE4254@exch.stack.ru>; from tdn@stack.ru on Thu, Dec 07, 2000 at 15:19:28 +0700 Organization: Heitec AG From: lenz@heitec.net (Lenz Gschwendtner) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Dmitry, On Thu, 07 Dec 2000, Tolpanov, Dmitry wrote: > I think it will good enouth any server with APOP support, but I can't find > any port for FreeBSD. May someone advice something. With APOP the major problem is the supprted clients. as far as i know only eudora supports this kind of authentication. > And another thing. As most of e-mail clients now support IMAP4 and as it is > more progressive and promising may be it is good idea to install IMAP > server. But I can't find what type of authentication it use. Any advise > appreciated. in IMAP there is a possibility to encrypt the password exchange. more documentation can be found here: http://www.washington.edu/imap/ cheers lenz -- (__) eat penguins instead, they start to (++)-----i\ spread around anyway! ~~| BSE | * |_|~|_| FreeBSD Systemadministrator To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 3:47:13 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 03:47:12 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from jupiter.albanyis.com.au (jupiter.albanyis.com.au [203.11.123.3]) by hub.freebsd.org (Postfix) with ESMTP id 75C9337B400 for ; Thu, 7 Dec 2000 03:47:08 -0800 (PST) Received: from phred.albanyis.com.au (dppp73.albanyis.com.au [203.11.123.73]) by jupiter.albanyis.com.au (8.9.3/8.9.3) with ESMTP id TAA10467 for ; Thu, 7 Dec 2000 19:53:28 +0800 Message-Id: <5.0.0.25.2.20001207194659.0241cb50@mail.albanyis.com.au> X-Sender: daniel@mail.albanyis.com.au X-Mailer: QUALCOMM Windows Eudora Version 5.0 Date: Thu, 07 Dec 2000 19:50:45 +0800 To: freebsd-isp@FreeBSD.org From: Daniel Subject: Change password via web Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, i've just started using FreeBSD and i've just started to work at an ISP in my local, and i've been asked to make a web page so that our clients can change their passwords on the web. Has anyone done this sort of thing before or know of any places i could get reference material from? Anything would be apperciated. Thanks Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 4: 6: 7 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 04:06:04 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from gate.trident-uk.co.uk (mail.trident-uk.co.uk [195.166.16.10]) by hub.freebsd.org (Postfix) with ESMTP id B688637B400 for ; Thu, 7 Dec 2000 04:06:03 -0800 (PST) Received: from [194.207.93.139] by gate.trident-uk.co.uk for daniel@albanyis.com.au id MAA20468; Thu Dec 7 12:04:24 2000 Organization: Psi-Domain Ltd. Subject: Re: Change password via web Date: Thu, 7 Dec 2000 11:58:19 +0000 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain References: <5.0.0.25.2.20001207194659.0241cb50@mail.albanyis.com.au> In-Reply-To: <5.0.0.25.2.20001207194659.0241cb50@mail.albanyis.com.au> MIME-Version: 1.0 Message-Id: <0012071209470B.03569@freefire.psi-domain.co.uk> Content-Transfer-Encoding: 8bit To: Daniel From: Jamie Heckford Reply-To: heckfordj@psi-domain.co.uk Cc: freebsd-isp@freebsd.org Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I did this - took me ages to figure out how ;) This was my method:- 1. Create a web form, thats asks for there username, current password, new pass, verify new pass. 2. Have there current password verified against a MySQL database with a perl script. 3. If ok, drop there new password into a plain text file with the format username,password \n . Have a seperate plain text file that will have there new password in a SQL UPDATE statement in, say, newpass.sql 4. Every ten minutes, have another perl script on cron process the plain text files. Process the MySQL with something like "mysql -upass -padmin passworddb < /var/passtmp/newpass.sql Then process the password plain text file, with something like this: open (UD, ") { @LINE = split /,/; foreach $value (@LINE) { Put your own hack here :) } I'll give you a clue for updating the passwords with your own hack, and that is adduser is a perl script ;) I copied the adduser script and then hacked it to include my own processing for the web stuff and ran it seperatly. Have Fun Jamie On Thu, 07 Dec 2000, you wrote: > Hi, i've just started using FreeBSD and i've just started to work at an ISP > in my local, and i've been asked to make a web page so that our clients can > change their passwords on the web. Has anyone done this sort of thing > before or know of any places i could get reference material from? Anything > would be apperciated. > > > Thanks > > > Dan > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message -- Jamie Heckford Chief Network Engineer Psi-Domain - Innovative Linux Solutions. Ask Us How. =================================== email: heckfordj@psi-domain.co.uk web: http://www.psi-domain.co.uk/ tel: +44 (0)1737 789 246 fax: +44 (0)1737 789 245 mobile: +44 (0)7779 646 529 =================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 5:46:24 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 05:46:20 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.psknet.com (orion.psknet.com [63.171.251.4]) by hub.freebsd.org (Postfix) with SMTP id 058D937B400 for ; Thu, 7 Dec 2000 05:46:20 -0800 (PST) Received: (qmail 40981 invoked from network); 7 Dec 2000 13:46:13 -0000 Received: from abyss.dashit.net (HELO ABYSS) (209.100.22.250) by orion.psknet.com with SMTP; 7 Dec 2000 13:46:13 -0000 From: "Troy Settle" To: , "Daniel" Cc: Subject: RE: Change password via web Date: Thu, 7 Dec 2000 08:46:13 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-reply-to: <0012071209470B.03569@freefire.psi-domain.co.uk> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal X-AntiVirus: scanned for viruses by Pulaski Networks (http://www.psknet.com) using AMaViS (http://www.amavis.org) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Install poppassd from /usr/ports/mail/poppassd Then grab one of my scripts: http://home.psknet.com/troy/passwd.php.txt http://home.psknet.com/troy/passwd.pl.txt The PHP script is self contained. For the perl script, you'll need to create a form (username, passwd, np1, np2) Should take you all of about 5 minutes to get up and running. G'luck, -- Troy Settle Pulaski Networks 540.994.4254 It's always a long day, 86400 doesn't fit into a short. ** -----Original Message----- ** From: owner-freebsd-isp@FreeBSD.ORG ** [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Jamie Heckford ** Sent: Thursday, December 07, 2000 6:58 AM ** To: Daniel ** Cc: freebsd-isp@freebsd.org ** Subject: Re: Change password via web ** ** ** I did this - took me ages to figure out how ;) ** ** This was my method:- ** ** 1. Create a web form, thats asks for there username, current ** password, new pass, ** verify new pass. ** ** 2. Have there current password verified against a MySQL database ** with a perl ** script. ** ** 3. If ok, drop there new password into a plain text file with the format ** username,password \n . Have a seperate plain text file that will ** have there new ** password in a SQL UPDATE statement in, say, newpass.sql ** ** 4. Every ten minutes, have another perl script on cron process ** the plain text ** files. ** ** Process the MySQL with something like "mysql -upass -padmin passworddb < ** /var/passtmp/newpass.sql ** ** Then process the password plain text file, with something like this: ** ** open (UD, ") { ** @LINE = split /,/; ** foreach $value (@LINE) { ** ** Put your own hack here :) ** ** } ** ** I'll give you a clue for updating the passwords with your own ** hack, and that is ** adduser is a perl script ;) ** ** I copied the adduser script and then hacked it to include my own ** processing for ** the web stuff and ran it seperatly. ** ** Have Fun ** ** Jamie ** ** On Thu, 07 Dec 2000, you wrote: ** > Hi, i've just started using FreeBSD and i've just started to ** work at an ISP ** > in my local, and i've been asked to make a web page so that ** our clients can ** > change their passwords on the web. Has anyone done this sort of thing ** > before or know of any places i could get reference material ** from? Anything ** > would be apperciated. ** > ** > ** > Thanks ** > ** > ** > Dan ** > ** > ** > ** > To Unsubscribe: send mail to majordomo@FreeBSD.org ** > with "unsubscribe freebsd-isp" in the body of the message ** -- ** Jamie Heckford ** Chief Network Engineer ** Psi-Domain - Innovative Linux Solutions. Ask Us How. ** ** =================================== ** email: heckfordj@psi-domain.co.uk ** web: http://www.psi-domain.co.uk/ ** ** tel: +44 (0)1737 789 246 ** fax: +44 (0)1737 789 245 ** mobile: +44 (0)7779 646 529 ** =================================== ** ** ** To Unsubscribe: send mail to majordomo@FreeBSD.org ** with "unsubscribe freebsd-isp" in the body of the message ** ** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 6:15:33 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 06:15:31 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from apollo.ocsny.com (apollo.ocsny.com [204.107.76.2]) by hub.freebsd.org (Postfix) with ESMTP id 93FB537B401 for ; Thu, 7 Dec 2000 06:15:26 -0800 (PST) Received: from ocsinternet.com (fw234.ocsny.com [204.107.76.234]) by apollo.ocsny.com (8.9.2/8.9.3) with ESMTP id JAA79314; Thu, 7 Dec 2000 09:14:58 -0500 (EST) Message-ID: <3A2F9AF2.E9AEB264@ocsinternet.com> Date: Thu, 07 Dec 2000 09:13:06 -0500 From: mikel X-Mailer: Mozilla 4.73 [en] (Windows NT 5.0; I) X-Accept-Language: en MIME-Version: 1.0 To: Daniel Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Change password via web References: <5.0.0.25.2.20001207194659.0241cb50@mail.albanyis.com.au> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org take a look at webmin in the ports collection.... cheers, mikel Daniel wrote: > Hi, i've just started using FreeBSD and i've just started to work at an ISP > in my local, and i've been asked to make a web page so that our clients can > change their passwords on the web. Has anyone done this sort of thing > before or know of any places i could get reference material from? Anything > would be apperciated. > > Thanks > > Dan > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 6:37:48 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 06:37:46 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from bsdie.rwsystems.net (bsdie.rwsystems.net [209.197.223.2]) by hub.freebsd.org (Postfix) with ESMTP id 3D03C37B400 for ; Thu, 7 Dec 2000 06:37:46 -0800 (PST) Received: from bsdie.rwsystems.net([209.197.223.2]) (1421 bytes) by bsdie.rwsystems.net via sendmail with P:esmtp/R:bind_hosts/T:inet_zone_bind_smtp (sender: ) id for ; Thu, 7 Dec 2000 08:36:14 -0600 (CST) (Smail-3.2.0.111 2000-Feb-17 #1 built 2000-Jun-25) Date: Thu, 7 Dec 2000 08:36:07 -0600 (CST) From: James Wyatt To: Daniel Cc: freebsd-isp@FreeBSD.org Subject: Re: Change password via web In-Reply-To: <5.0.0.25.2.20001207194659.0241cb50@mail.albanyis.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 7 Dec 2000, Daniel wrote: > Hi, i've just started using FreeBSD and i've just started to work at an ISP > in my local, and i've been asked to make a web page so that our clients can > change their passwords on the web. Has anyone done this sort of thing > before or know of any places i could get reference material from? Anything > would be apperciated. Browse the archives at freebsd.org because this gets asked from time to time. I didn't find anything in ports (but ports on this machine are oldish compared to 4.2's), but you might be able to start with poppasswd for the password-changing part of the code. There has *got* to be something already coded and tested by someone, though. You might also learn about 'freshmeat.net' and 'sourceforge.net' as they are great sources of useful code and applications. HTH - Jy@ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 7:18:20 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 07:18:17 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.wanlogistics.net (mail.wanlogistics.net [63.209.114.3]) by hub.freebsd.org (Postfix) with ESMTP id 9DE7537B400 for ; Thu, 7 Dec 2000 07:18:16 -0800 (PST) Received: (from bill@localhost) by mail.wanlogistics.net (8.9.3/8.9.3) id KAA58009 for freebsd-isp@freebsd.org; Thu, 7 Dec 2000 10:18:00 -0500 (EST) (envelope-from bill) Message-Id: <200012071518.KAA58009@mail.wanlogistics.net> Subject: Strange fetchmail/freebsd/verio problem To: freebsd-isp@freebsd.org Date: Thu, 7 Dec 2000 10:17:59 -0500 (EST) Reply-To: bv@wjv.com From: bv@wjv.com Sender: bill@mail.wanlogistics.net Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Reply to: bv@wjv.com X-Mailer: ELM [version 2.4ME+ PL61 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit I maintain some servers on a Level3 backbone. While waiting for our DS3 and the ATM to come up so I can get ADSL service from 'myself', I've been using my old dialup account on Verio. Everthing was fine until last night. Then the fetchmail stopped working. I found that no matter what I did, telnet, ftp, fetchmail, to any of the machines there I would get a login prompt. I would then get a slow entry for the login named, equally slow for password, and then things such as an 'ls' would either never complete or take 2 to 5 minutes. I went to the facilty - and everything looked normal there. I had fast access to everywhere in the world [100Mbit uplink into ther OC48/OC192 network]. This was about 1AM. Nothing wrong so I came back. THis AM the same thing. I called my partner and he could access all the web sties we host with no problem, login in remotely, etc. I still could not. I do some maintenance on a machine across the state. I performed an ssh loign there, and then was able to access the machines as I normally would. It's just this account coming in from Verio just wont access web sites, ftp, etc. NOTHING has been changed, it just stopped. The last changes to this system were about 6 weeks ago. I'm totally confused at this moment. My dialup is performing PPP and NAT and it works flawlessly. I can go to any other sites in the world and have no problem - as the ssh above shows. So what do I look for, what debuggers do I run, etc. The web machines are FreeBSD 4.0, and the mail if FreeBSD 3.4. THe only thing I see in the logs there on the failed mail transers are POP timeouts. If it were only mail I could see perhaps a password has changed. BUt I can access that machine with my password if I got in via another route - which is a C&W system. Anybody have any clues. Until I get this fixed, and/or change providers [I'd just as soon not go through that as we hope to have our own ADSL up in a month], I'm ftp'ing the my mailbox on the mail server to the system across the state, and then transfering back. It's as if one I get into the machine it doesn't like the IP's or that Verio is cutting me to 10cps or something. Customer service at Verio [at least in the past] has been 1+ hour on hold so I'd just as not go that route if I can. Anybody have any idea, or what I can turn on to trace this problem. Bill Vermillion -- bv @ wjv.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 7:43:59 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 07:43:57 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from blotto.phreak.net (blotto.phreak.net [207.250.188.230]) by hub.freebsd.org (Postfix) with ESMTP id AD5AD37B699 for ; Thu, 7 Dec 2000 07:43:57 -0800 (PST) Received: from phreak.net (localhost.phreak.net [127.0.0.1]) by blotto.phreak.net (Postfix) with SMTP id 34B049EE01 for ; Thu, 7 Dec 2000 09:44:25 -0600 (CST) Received: from 207.250.188.69 (SquirrelMail authenticated user operator) by mail.phreak.net with HTTP; Thu, 7 Dec 2000 09:44:25 -0600 (CST) Message-ID: <1995.207.250.188.69.976203865.squirrel@mail.phreak.net> Date: Thu, 7 Dec 2000 09:44:25 -0600 (CST) Subject: Re: POP3 or IMAP. From: "Operator" To: freebsd-isp@FreeBSD.ORG In-Reply-To: <20001207102433.C2411@heitec.net> References: <20001207102433.C2411@heitec.net> X-Mailer: SquirrelMail (version 0.5) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > in IMAP there is a possibility to encrypt the password exchange. more > documentation can be found here: > http://www.washington.edu/imap/ > I'd avoid the Washington IMAP server, it's got issues.. Take a look at Cyrus and Stunnel, overall a very good combo. http://asg.web.cmu.edu/cyrus/download/ Stick with 1.6.24 the 2.x stuff isn't real stable right now. and www.stunnel.org Have fun! -- Operator operator@phreak.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 9: 4: 8 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 09:04:04 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from gatordog.com (gatordog.com [198.30.158.114]) by hub.freebsd.org (Postfix) with ESMTP id 6C35E37B400 for ; Thu, 7 Dec 2000 09:04:02 -0800 (PST) Received: from blackbox.gatordog.com (blackbox.gatordog.com [198.30.158.115]) by gatordog.com (8.9.3/8.9.3) with ESMTP id MAA87051; Thu, 7 Dec 2000 12:08:01 -0500 (EST) (envelope-from adamkuj@gatordog.com) Date: Thu, 7 Dec 2000 12:05:56 -0500 (EST) From: Adam Kujawski To: bv@wjv.com Cc: freebsd-isp@FreeBSD.ORG Subject: Re: Strange fetchmail/freebsd/verio problem In-Reply-To: <200012071518.KAA58009@mail.wanlogistics.net> Message-ID: X-Joke: decode@bgnet.bgsu.edu X-Carnivore: top-secret data CIA DoD destruct attack warmod directorate NSTD ORD warrior-T foreign takeover MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I wonder if it might be an MTU problem of some sort. I've seen a similar problem before that was caused by bad firmware on a switch. The switch was dropping packets over 1428 bytes or something like that (I remember it was just under the normal size for an ethernet frame..). You could login, because the username/password prompt use relativly small packets. However, as soon as you logged and did anything that sent a larger amound of data (i.e. ls, top, netstat..) the connection would freeze. Similarly, you could load very small web pages, but anything over a kb or so wouldn't load. Try pinging/tracerouting to your servers with larger and larger packet lengths. Good luck, Adam On Thu, 7 Dec 2000 bv@wjv.com wrote: > Date: Thu, 7 Dec 2000 10:17:59 -0500 (EST) > From: bv@wjv.com > To: freebsd-isp@FreeBSD.ORG > Subject: Strange fetchmail/freebsd/verio problem > > Reply to: bv@wjv.com > X-Mailer: ELM [version 2.4ME+ PL61 (25)] > MIME-Version: 1.0 > Content-Type: text/plain; charset=US-ASCII > Content-Transfer-Encoding: 7bit > > I maintain some servers on a Level3 backbone. While waiting > for our DS3 and the ATM to come up so I can get ADSL service > from 'myself', I've been using my old dialup account on Verio. > > Everthing was fine until last night. Then the fetchmail stopped > working. > > I found that no matter what I did, telnet, ftp, fetchmail, to > any of the machines there I would get a login prompt. I would > then get a slow entry for the login named, equally slow for > password, and then things such as an 'ls' would either > never complete or take 2 to 5 minutes. > > I went to the facilty - and everything looked normal there. I had > fast access to everywhere in the world [100Mbit uplink into > ther OC48/OC192 network]. This was about 1AM. Nothing wrong > so I came back. > > THis AM the same thing. I called my partner and he could access > all the web sties we host with no problem, login in remotely, etc. > I still could not. > > I do some maintenance on a machine across the state. I performed > an ssh loign there, and then was able to access the machines > as I normally would. It's just this account coming in from Verio > just wont access web sites, ftp, etc. NOTHING has been changed, > it just stopped. The last changes to this system were about 6 > weeks ago. > > I'm totally confused at this moment. My dialup is performing PPP > and NAT and it works flawlessly. I can go to any other sites > in the world and have no problem - as the ssh above shows. > > So what do I look for, what debuggers do I run, etc. > > The web machines are FreeBSD 4.0, and the mail if FreeBSD 3.4. > THe only thing I see in the logs there on the failed mail > transers are POP timeouts. If it were only mail I could see > perhaps a password has changed. BUt I can access that machine > with my password if I got in via another route - which is a C&W > system. > > Anybody have any clues. > > Until I get this fixed, and/or change providers [I'd just as soon > not go through that as we hope to have our own ADSL up in a month], > I'm ftp'ing the my mailbox on the mail server to the system > across the state, and then transfering back. > > It's as if one I get into the machine it doesn't like the IP's > or that Verio is cutting me to 10cps or something. Customer > service at Verio [at least in the past] has been 1+ hour on hold so > I'd just as not go that route if I can. > > Anybody have any idea, or what I can turn on to trace this problem. > > Bill Vermillion > -- > bv @ wjv.com > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > ________________________________________________________________ Adam Kujawski | Home: (419) 352-1289 adamkuj@gatordog.com | Cell: (419) 261-3268 ________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 10:30:25 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 10:30:19 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from bilver.wjv.com (dhcp-1-70.n01.orldfl01.us.ra.verio.net [157.238.210.70]) by hub.freebsd.org (Postfix) with ESMTP id 83E9837B6AB for ; Thu, 7 Dec 2000 10:30:17 -0800 (PST) Received: (from bill@localhost) by bilver.wjv.com (8.9.3/8.9.3) id NAA01999 for freebsd-isp@freebsd.org; Thu, 7 Dec 2000 13:30:12 -0500 (EST) (envelope-from bill) Date: Thu, 7 Dec 2000 13:30:08 -0500 From: Bill Vermillion To: freebsd-isp@freebsd.org Subject: Re: Strange fetchmail/freebsd/verio problem Message-ID: <20001207133007.A1846@wjv.com> Reply-To: bv@bilver.wjv.com References: <200012071518.KAA58009@mail.wanlogistics.net> <20001207112056.H1710@staff.msen.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001207112056.H1710@staff.msen.com>; from wayne@staff.msen.com on Thu, Dec 07, 2000 at 11:20:56AM -0500 Organization: W.J.Vermillion / Orlando - Winter Park Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, Dec 07, 2000 at 11:20:56AM -0500, Michael R. Wayne thus spoke: > On Thu, Dec 07, 2000 at 10:17:59AM -0500, bv@wjv.com wrote: Got 3 mails on this - I'll use this to reply. In my groggy state last night - starter problem, lost my cell phone, just got a dead computer back with new m'board, and then that, made it a BAD day and I was not thinking as clearly as I normally do. > > I maintain some servers on a Level3 backbone. While waiting > > for our DS3 and the ATM to come up so I can get ADSL service > > from 'myself', I've been using my old dialup account on Verio. > > working. > > Anybody have any idea, or what I can turn on to trace this problem. > Well, I suspect either you have a packet loss problem, a maintenance > problem, or a fragmentation problem. > Where does traceroute (both directions) say the problem starts? > It's not impossible that someone is doing maintenance and you are > getting burned, call everyone involved that you buy from. Do the > packets travel the same path (in and out) normally and when the > problem starts? Same path (partway) to your other machine as to > Verio ? I did traceroute last night, but I'm going to recheck again. Hm. Got dropped one on the traceroute from this machine [the Verio dialup] the target machine. I didn't see that last night when I checked. That was as the Washington Verio to L3 Washington. From this machine it's verion in Orlando > Atlanta > McLean Va > Level 3 Wa.DC > Atlanta > Orlando To get my 'stuff' I run an ssh to a machine in Cocoa FL I do some maintenance on. A tracroute to that one is C&W in Cocoa -> Pompano Beach -> Dallas -> Level3 Dallas ->Atlanta -> Orlando The ssh route to Cocoa is Verio Orlando -> Atlanta -> McLean -> Philadelphia -> C&W West Org, Nj, -> C&W Atlanta, -> L3 Atlanta, -> Orlando. > I suspect that it is NOT a FreeBSD issue. I KNOW it is not a FreeBSD issue, but since all the stuff I maintain is FreeBSD based I figured this would be THE place to ask to point me to the proper tools I may have overlooked to debug this. > Uh, stupid question, you DO have every single Ethernet interface > (including L3) set to proper interface speed/duplex and not set to > "Auto", right? I've seen problems like this with mismathces before, > they only show up under load. It's doesnt' appear to L3. But from some other suggestion I tried pinging with setting the packet sizes. I had just pinged before and got no more than 5% packet loss. Not good but I'd seen worse. So I set packet size to 128 and got 36% loss through Verio. Ooh. Tried 500 bytes - packet loss 66%. Go for broke. I tried 1000 byte packets and saw 96% loss. Guess that shows where the problem is. Washington area always seems to be a problem. I'm assuming that's where it is because the loss on the traceroute, and that the routes that work don't use the Verio Wa to L3 link. On the C&W link I got no packet loss until I tried 1000 byte packets. Lost ONE packet with that overgrown size. So I tried the right tool, but without the right parameter. > OT: how has L3 been to deal with and what are the prices like? Well we did some co-location scouting for an old Unix database client of mine before they decided to become a dot-com startup. We had heard of Level 3 but not seen any of it until that trip. One walk inside and we were sold. Uunet looked like poor in comparion [this is the Herndon VA area]. Agis was just moving in - but I liked their layout better than Uunet. After seeing L3 there was no contest. Basically L3 is the 3rd network built by James Crowe. He sold his MFS - Metropolitan Fibre system to the LDDS/Wordlcom/UUNet group, and after a few months there he decided it was time to build a network 'the right way'. Our prices are great. However L3 has stopped colo facilities except in one or two cities. Current pricing is far higher than our price. But they are pricing it differntly so a low-bandwidth user would come out cheaper than our monthly rate, but if they got to what we've contracted for they would be higher. So if we get all our six racks filled we can put racks in the space that colo.com has - about 1/4 mile away - and still be on the L3 network at our pricing - but rack prices are higher. We have to use two telephone companies as the metro area is divided between Sprint and Bell South. We will probably go over to optical as the port charges for DS3, OC3 and OC12 differ from each other by only about $50/month. The interface cards are more expensive, but after the second link the savings on the IDU's make it pay for itself. There is going to be a glut of colo space in this area. An old Costo warehouse is being rebuilt - Colo.com has part of it. Duran out of Texas is convering and old Penny's store and adding a 3rd floor - all colo/clec space - about 1 block from Bell main. The new AT&T facility is coming up. Time Warner is just coming up. It's sort of frightening. We're just a small ISP [with no dial-ups] and we're building a co-op for a customer, and handling special connectivity. Sort of custom communications. Thanks everyone for those things I had overlooked. Bill -- Bill Vermillion - bv @ wjv . com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 22:42:35 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 22:42:32 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from gull.prod.itd.earthlink.net (gull.prod.itd.earthlink.net [207.217.121.85]) by hub.freebsd.org (Postfix) with ESMTP id AA3C737B400 for ; Thu, 7 Dec 2000 22:42:32 -0800 (PST) Received: from aspenworks.com (hh1127215.direcpc.com [206.71.127.215]) by gull.prod.itd.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id WAA13210 for ; Thu, 7 Dec 2000 22:42:25 -0800 (PST) Message-ID: <3A3081F3.E0A35B55@aspenworks.com> Date: Thu, 07 Dec 2000 23:38:43 -0700 From: Alex Huppenthal Reply-To: alex@aspenworks.com Organization: Aspenworks X-Mailer: Mozilla 4.73 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: free Subject: MyODBC port FreeBSD 4.2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm setting up a FreeBSD system as a database server for Web applications. I've installed MySQL 323 without a hitch, but installing MyODBC from the Ports collection isn't going as well. I've made sure I have the latest port and have rebuilt FreeBSD 4.2 (mostly because its due) still no luck. Shedding any light would be appreciated. Anyone seen this problem? bold:/usr1/ports/databases/myodbc >> make ===> Building for MyODBC-2.50.34 /bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I. -I/usr/local/include/mysql -I/usr/local/include -O -pipe -c connect.c cc -DHAVE_CONFIG_H -I. -I. -I. -I/usr/local/include/mysql -I/usr/local/include -O -pipe -Wp,-MD,.deps/connect.pp -c connect.c -fPIC -DPIC -o connect.lo connect.c: In function `SQLAllocConnect': connect.c:89: structure has no member named `vio' connect.c: In function `SQLConnect': connect.c:196: structure has no member named `vio' gmake: *** [connect.lo] Error 1 *** Error code 2 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Thu Dec 7 22:58:29 2000 From owner-freebsd-isp@FreeBSD.ORG Thu Dec 7 22:58:27 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from newcolo.invictanet.co.uk (newcolo.invictanet.co.uk [62.232.63.118]) by hub.freebsd.org (Postfix) with ESMTP id 05C3937B401 for ; Thu, 7 Dec 2000 22:58:27 -0800 (PST) Received: from harryhome (modem411.netkonect.net [194.164.14.157]) (authenticated) by newcolo.invictanet.co.uk (8.11.1/8.11.1) with ESMTP id eB86wOI09336 for ; Fri, 8 Dec 2000 06:58:24 GMT From: "InvictaNet Customer Support" To: "Freebsd-ISP" Subject: UCD-SNMPD Date: Fri, 8 Dec 2000 06:58:03 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi Can anyone suggest a reason why ucd-snmpd should not be run through tcp-wrappers? I want to restrict access so that only localhost (running MRTG) can access anything. Martyn Routley ----------------------------------------------------- InvictaNet - The Internet in Plain English, Guaranteed http://www.invictanet.co.uk mailto:info@invictanet.co.uk phone: 08707 440180 fax: 08707 440181 ------------------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri Dec 8 3:38:12 2000 From owner-freebsd-isp@FreeBSD.ORG Fri Dec 8 03:38:11 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from jupiter.albanyis.com.au (jupiter.albanyis.com.au [203.11.123.3]) by hub.freebsd.org (Postfix) with ESMTP id A569937B402 for ; Fri, 8 Dec 2000 03:38:05 -0800 (PST) Received: from phred.albanyis.com.au (dppp87.albanyis.com.au [203.11.123.87]) by jupiter.albanyis.com.au (8.9.3/8.9.3) with ESMTP id TAA14940 for ; Fri, 8 Dec 2000 19:44:26 +0800 Message-Id: <5.0.0.25.2.20001208193809.023f6bf0@mail.albanyis.com.au> X-Sender: daniel@mail.albanyis.com.au X-Mailer: QUALCOMM Windows Eudora Version 5.0 Date: Fri, 08 Dec 2000 19:41:40 +0800 To: freebsd-isp@freebsd.org From: Daniel Subject: Change password via web Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Firstly i have to thank everyone that answered my email, i was so surprise at how fast the responses were!! The way that i have chosen to go about it was to use the change-pass cgi script and a html page. I've installed poppassd on the server and have entered the strings into the correct files, and have changed the script to my address. The only problem i get is when i go to change a password i get an error back saying "Password Server Not Responding". I've tried a few things and nothing seems to work, does anyone have any ideas? or come across this before? Again a big thanks to everyone Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri Dec 8 4:39: 6 2000 From owner-freebsd-isp@FreeBSD.ORG Fri Dec 8 04:39:01 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.psknet.com (orion.psknet.com [63.171.251.4]) by hub.freebsd.org (Postfix) with SMTP id 67B1037B400 for ; Fri, 8 Dec 2000 04:39:01 -0800 (PST) Received: (qmail 21113 invoked from network); 8 Dec 2000 12:38:59 -0000 Received: from abyss.dashit.net (HELO ABYSS) (209.100.22.250) by orion.psknet.com with SMTP; 8 Dec 2000 12:38:59 -0000 From: "Troy Settle" To: Subject: RE: Change password via web Date: Fri, 8 Dec 2000 07:38:59 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal In-Reply-To: X-AntiVirus: scanned for viruses by Pulaski Networks (http://www.psknet.com) using AMaViS (http://www.amavis.org) Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Ok guys and gals, When/if you download one of the 2 scripts I posted, please verify that you have inetd.conf (or alternative) configured correctly to listen on port 106 and run poppassd for any incoming connections. I can't/won't help with the perl script, but if the PHP script says "Connection Refused," you can damned well bet that the script is crapping out because nothing's listening to port 106 on the specified server (localhost by default). Enjoy, -Troy ** -----Original Message----- ** From: owner-freebsd-isp@FreeBSD.ORG ** [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Troy Settle ** Sent: Thursday, December 07, 2000 8:46 AM ** To: heckfordj@psi-domain.co.uk; Daniel ** Cc: freebsd-isp@freebsd.org ** Subject: RE: Change password via web ** ** ** ** Install poppassd from /usr/ports/mail/poppassd ** ** Then grab one of my scripts: ** ** http://home.psknet.com/troy/passwd.php.txt ** http://home.psknet.com/troy/passwd.pl.txt ** ** The PHP script is self contained. For the perl script, you'll need to ** create a form (username, passwd, np1, np2) ** ** Should take you all of about 5 minutes to get up and running. ** ** G'luck, ** ** -- ** Troy Settle ** Pulaski Networks ** 540.994.4254 ** ** It's always a long day, 86400 doesn't fit into a short. ** ** ** ** -----Original Message----- ** ** From: owner-freebsd-isp@FreeBSD.ORG ** ** [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Jamie Heckford ** ** Sent: Thursday, December 07, 2000 6:58 AM ** ** To: Daniel ** ** Cc: freebsd-isp@freebsd.org ** ** Subject: Re: Change password via web ** ** ** ** ** ** I did this - took me ages to figure out how ;) ** ** ** ** This was my method:- ** ** ** ** 1. Create a web form, thats asks for there username, current ** ** password, new pass, ** ** verify new pass. ** ** ** ** 2. Have there current password verified against a MySQL database ** ** with a perl ** ** script. ** ** ** ** 3. If ok, drop there new password into a plain text file with ** the format ** ** username,password \n . Have a seperate plain text file that will ** ** have there new ** ** password in a SQL UPDATE statement in, say, newpass.sql ** ** ** ** 4. Every ten minutes, have another perl script on cron process ** ** the plain text ** ** files. ** ** ** ** Process the MySQL with something like "mysql -upass -padmin ** passworddb < ** ** /var/passtmp/newpass.sql ** ** ** ** Then process the password plain text file, with something like this: ** ** ** ** open (UD, ") { ** ** @LINE = split /,/; ** ** foreach $value (@LINE) { ** ** ** ** Put your own hack here :) ** ** ** ** } ** ** ** ** I'll give you a clue for updating the passwords with your own ** ** hack, and that is ** ** adduser is a perl script ;) ** ** ** ** I copied the adduser script and then hacked it to include my own ** ** processing for ** ** the web stuff and ran it seperatly. ** ** ** ** Have Fun ** ** ** ** Jamie ** ** ** ** On Thu, 07 Dec 2000, you wrote: ** ** > Hi, i've just started using FreeBSD and i've just started to ** ** work at an ISP ** ** > in my local, and i've been asked to make a web page so that ** ** our clients can ** ** > change their passwords on the web. Has anyone done this ** sort of thing ** ** > before or know of any places i could get reference material ** ** from? Anything ** ** > would be apperciated. ** ** > ** ** > ** ** > Thanks ** ** > ** ** > ** ** > Dan ** ** > ** ** > ** ** > ** ** > To Unsubscribe: send mail to majordomo@FreeBSD.org ** ** > with "unsubscribe freebsd-isp" in the body of the message ** ** -- ** ** Jamie Heckford ** ** Chief Network Engineer ** ** Psi-Domain - Innovative Linux Solutions. Ask Us How. ** ** ** ** =================================== ** ** email: heckfordj@psi-domain.co.uk ** ** web: http://www.psi-domain.co.uk/ ** ** ** ** tel: +44 (0)1737 789 246 ** ** fax: +44 (0)1737 789 245 ** ** mobile: +44 (0)7779 646 529 ** ** =================================== ** ** ** ** ** ** To Unsubscribe: send mail to majordomo@FreeBSD.org ** ** with "unsubscribe freebsd-isp" in the body of the message ** ** ** ** ** ** ** ** To Unsubscribe: send mail to majordomo@FreeBSD.org ** with "unsubscribe freebsd-isp" in the body of the message ** ** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Fri Dec 8 12:20:12 2000 From owner-freebsd-isp@FreeBSD.ORG Fri Dec 8 12:20:10 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from newcolo.invictanet.co.uk (newcolo.invictanet.co.uk [62.232.63.118]) by hub.freebsd.org (Postfix) with ESMTP id 5E23937B400 for ; Fri, 8 Dec 2000 12:20:09 -0800 (PST) Received: from harryhome (host213-1-188-240.btinternet.com [213.1.188.240]) (authenticated) by newcolo.invictanet.co.uk (8.11.1/8.11.1) with ESMTP id eB8KK7323881 for ; Fri, 8 Dec 2000 20:20:07 GMT From: "InvictaNet Customer Support" To: "Freebsd-ISP" Subject: RE: Change password via web Date: Fri, 8 Dec 2000 20:20:06 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I've got it now (tipin erer in /etc/services) Martyn Routley ----------------------------------------------------- InvictaNet - The Internet in Plain English, Guaranteed http://www.invictanet.co.uk mailto:info@invictanet.co.uk phone: 08707 440180 fax: 08707 440181 ------------------------------------------------------ -----Original Message----- From: owner-freebsd-isp@FreeBSD.ORG [mailto:owner-freebsd-isp@FreeBSD.ORG]On Behalf Of Troy Settle Sent: Friday, December 08, 2000 12:39 PM To: freebsd-isp@FreeBSD.ORG Subject: RE: Change password via web Ok guys and gals, When/if you download one of the 2 scripts I posted, please verify that you have inetd.conf (or alternative) configured correctly to listen on port 106 and run poppassd for any incoming connections. I can't/won't help with the perl script, but if the PHP script says "Connection Refused," you can damned well bet that the script is crapping out because nothing's listening to port 106 on the specified server (localhost by default). Enjoy, -Troy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message From owner-freebsd-isp Sat Dec 9 14:12:48 2000 From owner-freebsd-isp@FreeBSD.ORG Sat Dec 9 14:12:46 2000 Return-Path: Delivered-To: freebsd-isp@freebsd.org Received: from mail.tcworks.net (mail.tcworks.net [216.61.218.4]) by hub.freebsd.org (Postfix) with ESMTP id 5051537B400 for ; Sat, 9 Dec 2000 14:12:46 -0800 (PST) Received: from tcworks.net (stuck.sticky.org [216.61.218.6]) by mail.tcworks.net (8.9.3/8.9.3) with ESMTP id QAA38879 for ; Sat, 9 Dec 2000 16:10:16 -0600 (CST) (envelope-from ccook@tcworks.net) Sender: xcess@mail.tcworks.net Message-ID: <3A32AEB1.A7A8D774@tcworks.net> Date: Sat, 09 Dec 2000 16:14:09 -0600 From: Chris Cook X-Mailer: Mozilla 4.72 [en] (X11; I; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-isp@freebsd.org Subject: Corrupted File System? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This may be off topic, but I figured it would be a good place to ask... we had one of our servers "lock up" for some reason. Had to reboot it without shutting down properly and when it came up fsck ran and had some errors. I told it to fix them all but I've now run fsck about 1000 times and it still comes up with errors like the ones below... It cannot seem to fix them, is this serious or do I not have to worry? I've even deleted the mrtg directory, after replacing the files in that directory from backup fsck will complain again... here is the output: UNALLOCATED I=1499981 OWNER=nobody MODE=100644 SIZE=55968 MTIME=Dec 9 15:55 2000 FILE=/local/www/data/mrtg/info/test.tcworks.net.log REMOVE? [yn] y ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts LINK COUNT FILE I=182591 OWNER=horses MODE=100644 SIZE=19400 MTIME=Dec 9 15:57 2000 COUNT 2 SHOULD BE 1 ADJUST? [yn] Even if you tell it to fix the errors, they will come back... THANKS for any help! -- Chris o----< ccook@tcworks.net >------------------------------------o |Chris Cook - Admin |TCWORKS.NET - http://www.tcworks.net | |The Computer Works ISP |FreeBSD - http://www.freebsd.org | o-------------------------------------------------------------o To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message