From owner-freebsd-mobile Sun Apr 9 11:22:27 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from lucky.medicusnet.de (ns.medicusnet.de [195.63.222.140]) by hub.freebsd.org (Postfix) with ESMTP id 13A0737B601 for ; Sun, 9 Apr 2000 11:22:15 -0700 (PDT) (envelope-from maulwurf@subloch.medicusnet.de) Received: from subloch.medicusnet.de (uucp@localhost) by lucky.medicusnet.de (8.9.3/8.9.3) with UUCP id UAA25677 for freebsd-mobile@freebsd.org; Sun, 9 Apr 2000 20:22:01 +0200 Received: by subloch.medicusnet.de (CrossPoint v3.12d R/C2188); 09 Apr 2000 20:18:48 +0200 Date: 09 Apr 2000 20:18:00 +0200 From: maulwurf@subloch.medicusnet.de (Stefan Huerter) To: freebsd-mobile@freebsd.org Message-ID: <7bZrqV6joRB@subloch.medicusnet.de> Subject: Thinkpad 770ED Boot/installation problem X-Mailer: CrossPoint v3.12d R/C2188 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Organization: die wahre Antwort: 42 oder 23? Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Guckux Has anyone experiences with installing FreeBSD on a IBM Thinkpad 770ED? My machine has following configuration: TP 770ED, 7.8GB IBM DYLA-HD (78100?), 96MB Ram, iPII-266, Trident-Video. PCMCIA: PSION DACOM 56Kflex/fax/ISDN 3COM 3C589D Does not matter, if cards inserted or not. Experiences: - Booting with FreeBSD 2.2.7 RELEASE CD-Rom: hangs while kernel config Booting with FreeBSD 3.1 RELEASE CD-Rom: takes a long time to boot after kernel was booted, no access possible (Device not configured) the machine hangs with a few fast short "deep" "pieps". Sometimes while in the kernel configuration kernel menu, sometimes while checking the devices. Booting with FreeBSD 3.4PAO Diskettes: boots pretty good, kernel configuration OK quitting the configuration menu and booting the kernel: it hangs with a few fast short "deep" pieps here are the last output lines from the PAO-Boot: ---------- cut --------- avail memory = 9147872 (89328K bytes) Preloaded elf kernel "kernel" at 0xc061b000 Preloaded mfs_root "/mfsroot" at 0xc061b09c Pentium Pro MTRR support enabled chip0: rev 0x02 on pci0.0.0 pcic0: rev 0x02 int a irq 255 on pci0.2.0 TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] pcic1: rev 0x02 int b irq 255 on pci0.2.1 TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] vga0: rev 0xf3 int a irq 11 on pci0.3.0 chip1: rev 0x01 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x01 on pci0.7.3 Probing for devices on PCI bus 1: Probing for devices on PCI bus 2: Probing for devices on PCI bus 3: Probing for devices on PCI bus 4: Probing for devices on PCI bus 5: Probing for devices on PCI bus 6: Probing for PnP devices: >>> HANGS (the machine is frozen) --------------- cut ------------- any ideas? It seems, the PnP stuff makes the problem?! Bye Stefan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message