From owner-freebsd-mobile  Sun Aug 13  4: 2:55 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from proxy2.ba.best.com (proxy2.ba.best.com [206.184.139.14])
	by hub.freebsd.org (Postfix) with ESMTP
	id A60B237B786; Sun, 13 Aug 2000 04:02:50 -0700 (PDT)
	(envelope-from finlayson@live.com)
Received: from kaipara.live.com (dhcp0.live.com [208.184.148.170])
	by proxy2.ba.best.com (8.9.3/8.9.2/best.out) with ESMTP id EAA26667;
	Sun, 13 Aug 2000 04:01:47 -0700 (PDT)
Message-Id: <4.3.1.1.20000813030742.00b19d80@localhost>
X-Sender: rsf@localhost
X-Mailer: QUALCOMM Windows Eudora Version 4.3.1
Date: Sun, 13 Aug 2000 03:40:57 -0700
To: freebsd-bugs@freebsd.org, freebsd-mobile@freebsd.org
From: Ross Finlayson <finlayson@live.com>
Subject: WaveLAN PCI adaptor hangs 4.1-STABLE
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Has anyone else had problems with a Lucent WaveLAN PCI adaptor card causing 
FreeBSD 4.1-STABLE to hang?  I find that although the kernel initialization 
correctly finds and configures the WaveLAN PCMCIA card (inserted in the PCI 
adaptor), the system hangs just a few seconds afterwards.

With PC card setup turned off in my rc.conf file (i.e., 
'pccard_enable="NO"'), I am able to reproduce the problem by hand, as follows:

	%pccardc pccardmem 0xd0000
	%pccardc dumpcis

This causes the system to hang immediately (*whether or not* the Wavelan 
PCMCIA card has been inserted in the PCI adaptor).

The same thing happens if I do "pccardc pccardmem" on any of the other 
three valid addresses: 0xd4000, 0xd8000, or 0xdc000.  OTOH, if I do

	%pccardc pccardmem 0xe0000

(i.e., using an invalid address) then the system no longer hangs (but of 
course, I can no longer access the PCMCIA card).

Has anyone else had this problem?  Any ideas?

	Ross.



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13  8:27:52 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [207.113.133.231])
	by hub.freebsd.org (Postfix) with ESMTP id 6006037B6B8
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 08:27:50 -0700 (PDT)
	(envelope-from insane@lunatic.oneinsane.net)
Received: by lunatic.oneinsane.net (Postfix, from userid 1000)
	id A80C515510; Sun, 13 Aug 2000 08:27:49 -0700 (PDT)
Date: Sun, 13 Aug 2000 08:27:49 -0700
From: Ron 'The InSaNe One' Rosson <insane@lunatic.oneinsane.net>
To: freebsd-mobile@freebsd.org
Subject: pccardd messages
Message-ID: <20000813082749.A30634@lunatic.oneinsane.net>
Reply-To: Ron Rosson <insane@lunatic.oneinsane.net>
Mail-Followup-To: freebsd-mobile@freebsd.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
X-Operating-System: FreeBSD lunatic.oneinsane.net 4.0-STABLE
X-Moon: The Moon is Waxing Gibbous (98% of Full)
X-Opinion: What you read here is my IMHO 
X-WWW: http://www.oneinsane.net
X-PGP-KEY: http://www.oneinsane.net/~insane/insane2-pgp5i.txt
X-Uptime: 8:25AM  up 11 days, 16:03, 1 user, load averages: 1.00, 1.00, 1.00
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Just upgraded to 4.1-Stable and I noticed these messages on my laptop.
Can someone explain the [<null>]'s.

Aug 12 06:42:37 mental pccardd[45]: Card "NETGEAR"("FA410TX") [Fast
Ethernet] [(null)] matched "NETGEAR" ("FA410TX") [(null)] [(null)] 


TIA
-- 
------------------------------------------------------------------------------
Ron Rosson          			      ... and a UNIX user said ...
The InSaNe One                 			      rm -rf *
insane@oneinsane.net     	            and all was /dev/null and *void()
------------------------------------------------------------------------------
	Women, children, Red Indians, spacemen, and a sort of
	 idealized version of Complete Renaissance Men first!


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 13: 4:52 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from telinco.net (internal.mail.telinco.net [212.1.128.4])
	by hub.freebsd.org (Postfix) with ESMTP id 55BD737B622
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 13:04:46 -0700 (PDT)
	(envelope-from b.candler@pobox.com)
Received: from ppp-5-38.as53.telinco.net ([212.159.156.38] helo=bloodhound.uk.worldonline.com)
	by telinco.net with esmtp (Exim 3.02 #1)
	id 13O3zy-000Fll-00; Sun, 13 Aug 2000 21:04:46 +0100
Received: from brian by bloodhound.uk.worldonline.com with local (Exim 3.15 #1)
	id 13O3zp-0004kY-00; Sun, 13 Aug 2000 21:04:37 +0100
Date: Sun, 13 Aug 2000 21:04:37 +0100
From: Brian Candler <B.Candler@pobox.com>
To: freebsd-mobile@FreeBSD.ORG
Cc: Warner Losh <imp@village.org>, shigeru@iij.ad.jp
Subject: Re: Ricoh RL5C475 PCI-PCMCIA adaptor and interrupts
Message-ID: <20000813210437.A18218@linnet.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0.1i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> I'll have to test this on my laptop.  I think this is more generically 
> a pci config issue.

OK, here's another problem just to muddy the waters :-)

I've put this same card into a friend's Dell OptiPlex machine. I can't even
get it recognised as an ISA peripheral. The PCI card is found:

$ dmesg | grep -i pcic
pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 11.0 on pci2

and as you can see no interrupt allocated, but it is also not detected as a
pccard controller.

$ pccardc dumpcis
0 slots found

Hmm. There is a pci-pci bridge detected, so presumably pci2 is downstream of
that - is there a problem with these PCI cards which map into ISA address
space being on the far side of such a bridge?

Unfortunately the Dell's BIOS has absolutely no settings to do with PCI or
interrupt allocation. Any other suggestions?

Cheers,

Brian.

P.S. I have tried both
  device          pcic
and the default,
  device         pcic0   at isa? irq 10 port 0x3e0 iomem 0xd0000
  device         pcic1   at isa? irq 11 port 0x3e2 iomem 0xd4000 disable

P.P.S. Found a picture of the card here:
http://www.airstation.com/PRODUCTS/ASINFO/WLAN/WLI-PCI-OP.html


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 17: 8:33 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id 55A1037B7E1
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 13 Aug 2000 17:08:30 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id SAA19940;
	Sun, 13 Aug 2000 18:08:22 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id SAA10899; Sun, 13 Aug 2000 18:07:44 -0600 (MDT)
Message-Id: <200008140007.SAA10899@harmony.village.org>
To: Brian Candler <B.Candler@pobox.com>
Subject: Re: Ricoh RL5C475 PCI-PCMCIA adaptor and interrupts 
Cc: freebsd-mobile@FreeBSD.ORG, shigeru@iij.ad.jp
In-reply-to: Your message of "Sun, 13 Aug 2000 21:04:37 BST."
		<20000813210437.A18218@linnet.org> 
References: <20000813210437.A18218@linnet.org>  
Date: Sun, 13 Aug 2000 18:07:44 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <20000813210437.A18218@linnet.org> Brian Candler writes:
: $ dmesg | grep -i pcic
: pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 11.0 on pci2

Which version?  Is this a pci card, or a laptop?  Or is it a PCI card
in a laptop docing bay...

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 17:35:14 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from phnxpop1.phnx.uswest.net (phnxpop1.phnx.uswest.net [206.80.192.1])
	by hub.freebsd.org (Postfix) with SMTP id A540937B61E
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 17:35:07 -0700 (PDT)
	(envelope-from mjolie@uswest.net)
Received: (qmail 10642 invoked by alias); 14 Aug 2000 00:35:05 -0000
Delivered-To: fixup-freebsd-mobile@freebsd.org@fixme
Received: (qmail 10620 invoked by uid 0); 14 Aug 2000 00:35:04 -0000
Received: from dialupn123.phnx.uswest.net (HELO lilbug) (209.180.139.123)
  by phnxpop1.phnx.uswest.net with SMTP; 14 Aug 2000 00:35:04 -0000
Message-ID: <001501c00587$1c26c2c0$0100a8c0@lilbug>
From: "Maria Buglino" <mjolie@uswest.net>
To: <freebsd-mobile@freebsd.org>
Subject: 3CXM056-BNW 3COM NOTEWORTHY
Date: Sun, 13 Aug 2000 17:32:20 -0700
MIME-Version: 1.0
Content-Type: multipart/alternative;
	boundary="----=_NextPart_000_0012_01C0054C.6F30DAE0"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.00.2615.200
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

This is a multi-part message in MIME format.

------=_NextPart_000_0012_01C0054C.6F30DAE0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

HELP!!!

I'm trying to get my 3com modem to work & I've checked a thousand sites =
and they all say that my modem is supposed to be config 0x20 "sio1" ?=20
but all it gives me is : driver allocation failed for Toshiba America =
(3CXM056-BNW)=20
&  the closest I can get is when I change it to config 0x21 "sio1" ? but =
then it sets it to sio4 which doesn't really exist.. I''m going crazy! =
please help!!

Andrew

------=_NextPart_000_0012_01C0054C.6F30DAE0
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2614.3500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>HELP!!!</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'm trying to get my 3com modem to work =
&amp; I've=20
checked a thousand sites and they all say that my modem is supposed to =
be config=20
0x20 "sio1" ? </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>but all it gives me is : driver =
allocation failed=20
for Toshiba America (3CXM056-BNW) </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>&amp;&nbsp; the closest I can get is =
when I change=20
it to config 0x21 "sio1" ? but then it sets it to sio4 which doesn't =
really=20
exist.. I''m going crazy! please help!!</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Andrew</FONT></DIV></BODY></HTML>

------=_NextPart_000_0012_01C0054C.6F30DAE0--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 19:41:30 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from zaphon.llamas.net (zaphon.llamas.net [207.203.36.210])
	by hub.freebsd.org (Postfix) with SMTP id 0418B37B7C0
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 19:41:27 -0700 (PDT)
	(envelope-from grumple@zaphon.llamas.net)
Received: (qmail 2861 invoked by uid 500); 14 Aug 2000 02:41:25 -0000
Date: Sun, 13 Aug 2000 19:41:25 -0700
From: Greg Rumple <grumple@zaphon.llamas.net>
To: freebsd-mobile@freebsd.org
Subject: okay, I want it 100%
Message-ID: <20000813194125.P28135@zaphon.llamas.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0us
X-Mailer: Mutt http://www.mutt.org/
X-Editor: Vim http://www.vim.org/
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Alright, after having enough of Linux, I finally put FreeBSD on my Sony
Vaio laptop (Sony Vaio XG18, 256MB of ram, 18.1gb hd).  I got 4.1-STABLE
on it with no problems, after fighting/playing the free I/O space/free
IRQ game I finally got my wavelan/wired ethernet working (and let me
tell you what, finding a free interrupt on this puppy was not a task,
I'm completely out now with the 1 I have given to pcmcia, and could
re-gain one by putting the pcmcia controller into polling mode if I so
desired).

Anyway, everything works great.  Sound even worked right out of the box
(well after I rebuilt the kernel turning on PCM).  The card is
recognized as

pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem
0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0

and works very well.  I have managed to get EVERYTHING working except
for one little nuisance.  I am unable to use the sound card after a
suspend.  Under Linux I had the same problem, but it was easy to correct
by unloading the sound module before suspending, and reloading it after
the suspend (since this card is only supported well under the commercial
OSS anyway).  Of course under linux, you have to also disable the sound
card to eject a pcmcia card, or else the machine hangs.  FreeBSD at
least doesn't exhibit this behaviour.

So the question is, I am sure to fix this the card just needs
re-initialized.  But how would I go about doing that since it's built
into the kernel?

Any ideas?

Greg

-- 
Greg Rumple
grumple@zaphon.llamas.net


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 19:57:33 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from medianstrip.net (medianstrip.net [206.113.38.30])
	by hub.freebsd.org (Postfix) with ESMTP id AF40F37BE3F
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 19:57:31 -0700 (PDT)
	(envelope-from msr@elision.org)
Received: by medianstrip.net (Postfix, from userid 1000)
	id E50F258E4; Sun, 13 Aug 2000 22:57:25 -0400 (EDT)
Date: Sun, 13 Aug 2000 22:57:25 -0400
From: mike ryan <msr@elision.org>
To: freebsd-mobile@freebsd.org
Subject: Re: okay, I want it 100%
Message-ID: <20000813225725.A429@medianstrip.net>
Mail-Followup-To: freebsd-mobile@freebsd.org
References: <20000813194125.P28135@zaphon.llamas.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20000813194125.P28135@zaphon.llamas.net>; from grumple@zaphon.llamas.net on Sun, Aug 13, 2000 at 07:41:25PM -0700
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Sun, Aug 13, 2000 at 07:41:25PM -0700, Greg Rumple wrote:
> 
> pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem
> 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
[...]
> I am unable to use the sound card after a suspend.

try the patch at

    http://www.FreeBSD.org/cgi/query-pr.cgi?pr=20255


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20: 4:42 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP
	id 9FF5E37B991; Sun, 13 Aug 2000 20:04:35 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA20626;
	Sun, 13 Aug 2000 21:04:33 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA11771; Sun, 13 Aug 2000 21:03:55 -0600 (MDT)
Message-Id: <200008140303.VAA11771@harmony.village.org>
To: Ross Finlayson <finlayson@live.com>
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
Cc: freebsd-bugs@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Sun, 13 Aug 2000 03:40:57 PDT."
		<4.3.1.1.20000813030742.00b19d80@localhost> 
References: <4.3.1.1.20000813030742.00b19d80@localhost>  
Date: Sun, 13 Aug 2000 21:03:55 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <4.3.1.1.20000813030742.00b19d80@localhost> Ross Finlayson writes:
: Has anyone else had problems with a Lucent WaveLAN PCI adaptor card causing 
: FreeBSD 4.1-STABLE to hang?

Yes.  I haven't fixed it either :-(

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20: 6:50 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from zaphon.llamas.net (zaphon.llamas.net [207.203.36.210])
	by hub.freebsd.org (Postfix) with SMTP id 0FEBF37B991
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 13 Aug 2000 20:06:45 -0700 (PDT)
	(envelope-from grumple@zaphon.llamas.net)
Received: (qmail 3145 invoked by uid 500); 14 Aug 2000 03:06:44 -0000
Date: Sun, 13 Aug 2000 20:06:43 -0700
From: Greg Rumple <grumple@zaphon.llamas.net>
To: Warner Losh <imp@village.org>
Cc: Ross Finlayson <finlayson@live.com>, freebsd-bugs@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE
Message-ID: <20000813200643.Q28135@zaphon.llamas.net>
References: <4.3.1.1.20000813030742.00b19d80@localhost> <200008140303.VAA11771@harmony.village.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0us
In-Reply-To: <200008140303.VAA11771@harmony.village.org>; from imp@village.org on Sun, Aug 13, 2000 at 09:03:55PM -0600
X-Mailer: Mutt http://www.mutt.org/
X-Editor: Vim http://www.vim.org/
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Weird, I am having no problems with my wavelan on 4.1-STABLE.

wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 11 slot 1 on pccard1

Greg

* Warner Losh (imp@village.org) [000814 03:05]:
> In message <4.3.1.1.20000813030742.00b19d80@localhost> Ross Finlayson writes:
> : Has anyone else had problems with a Lucent WaveLAN PCI adaptor card causing 
> : FreeBSD 4.1-STABLE to hang?
> 
> Yes.  I haven't fixed it either :-(
> 
> Warner
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message

-- 
Greg Rumple
grumple@zaphon.llamas.net


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20: 8:25 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id B679437B8DC
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 13 Aug 2000 20:08:20 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA20646;
	Sun, 13 Aug 2000 21:08:19 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA11806; Sun, 13 Aug 2000 21:07:41 -0600 (MDT)
Message-Id: <200008140307.VAA11806@harmony.village.org>
To: Ron Rosson <insane@lunatic.oneinsane.net>
Subject: Re: pccardd messages 
Cc: freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Sun, 13 Aug 2000 08:27:49 PDT."
		<20000813082749.A30634@lunatic.oneinsane.net> 
References: <20000813082749.A30634@lunatic.oneinsane.net>  
Date: Sun, 13 Aug 2000 21:07:41 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <20000813082749.A30634@lunatic.oneinsane.net> "Ron 'The InSaNe One' Rosson" writes:
: Just upgraded to 4.1-Stable and I noticed these messages on my laptop.
: Can someone explain the [<null>]'s.
: 
: Aug 12 06:42:37 mental pccardd[45]: Card "NETGEAR"("FA410TX") [Fast
: Ethernet] [(null)] matched "NETGEAR" ("FA410TX") [(null)] [(null)] 

Means that there's nothing in the CIS for the card.  Likely pccardd
has a bug that it is passing NULL to printf which likely should be
fixed.  It would make a great project for someone looking to
contribute something, but with a time for only a little bit of
hacking.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20: 9:15 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rip.psg.com (rip.psg.com [147.28.0.39])
	by hub.freebsd.org (Postfix) with ESMTP
	id D577C37B991; Sun, 13 Aug 2000 20:09:11 -0700 (PDT)
	(envelope-from randy@psg.com)
Received: from randy by rip.psg.com with local (Exim 3.13 #1)
	id 13OAcS-000IOU-00; Sun, 13 Aug 2000 20:08:56 -0700
From: Randy Bush <randy@psg.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: Greg Rumple <grumple@zaphon.llamas.net>
Cc: Warner Losh <imp@village.org>,
	Ross Finlayson <finlayson@live.com>, freebsd-bugs@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE
References: <4.3.1.1.20000813030742.00b19d80@localhost>
	<200008140303.VAA11771@harmony.village.org>
	<20000813200643.Q28135@zaphon.llamas.net>
Message-Id: <E13OAcS-000IOU-00@rip.psg.com>
Date: Sun, 13 Aug 2000 20:08:56 -0700
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 11 slot 1 on pccard1

that's pcmcia.  the writer was pci.

randy


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20:13:40 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP
	id 6359537B660; Sun, 13 Aug 2000 20:13:31 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id VAA20674;
	Sun, 13 Aug 2000 21:13:21 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id VAA11861; Sun, 13 Aug 2000 21:12:43 -0600 (MDT)
Message-Id: <200008140312.VAA11861@harmony.village.org>
To: Greg Rumple <grumple@zaphon.llamas.net>
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
Cc: Ross Finlayson <finlayson@live.com>, freebsd-bugs@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Sun, 13 Aug 2000 20:06:43 PDT."
		<20000813200643.Q28135@zaphon.llamas.net> 
References: <20000813200643.Q28135@zaphon.llamas.net>  <4.3.1.1.20000813030742.00b19d80@localhost> <200008140303.VAA11771@harmony.village.org> 
Date: Sun, 13 Aug 2000 21:12:43 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <20000813200643.Q28135@zaphon.llamas.net> Greg Rumple writes:
: Weird, I am having no problems with my wavelan on 4.1-STABLE.
: 
: wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 11 slot 1 on pccard1

I'm having a problem specifically with the TI 1225 PCI based card
which comes with the wavelan card and all other pccard cards.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 20:46:33 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from eddings.acpub.duke.edu (eddings.acpub.duke.edu [152.3.233.76])
	by hub.freebsd.org (Postfix) with ESMTP id EF98B37BD01
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 13 Aug 2000 20:46:29 -0700 (PDT)
	(envelope-from sto@stat.Duke.EDU)
Received: from bobzilla.adsl.duke.edu (bobzilla.adsl.duke.edu [152.16.67.15]) 
	by eddings.acpub.duke.edu (8.9.3/8.9.3/Duke-5.0.0) with ESMTP id XAA23116;
	Sun, 13 Aug 2000 23:46:29 -0400 (EDT)
Received: (from sto@localhost)
	by bobzilla.adsl.duke.edu (8.9.3/8.9.3) id XAA41667;
	Sun, 13 Aug 2000 23:46:22 -0400 (EDT)
	(envelope-from sto)
Date: Sun, 13 Aug 2000 23:46:22 -0400
From: "Sean O'Connell" <sean@stat.Duke.EDU>
To: Maria Buglino <mjolie@uswest.net>
Cc: FreeBSD mobile <freebsd-mobile@FreeBSD.ORG>
Subject: Re: 3CXM056-BNW 3COM NOTEWORTHY
Message-ID: <20000813234622.B41638@stat.Duke.EDU>
Reply-To: "Sean O'Connell" <sean@stat.Duke.EDU>
References: <001501c00587$1c26c2c0$0100a8c0@lilbug>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <001501c00587$1c26c2c0$0100a8c0@lilbug>; from mjolie@uswest.net on Sun, Aug 13, 2000 at 05:32:20PM -0700
X-Organization: House of Schmutzli
X-Kitties: Bitty Maya CJ Keisha Jacob Hopey
X-Hound: Bob
X-OS-of-Choice: FreeBSD
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Maria Buglino stated:
: HELP!!!
: 
: I'm trying to get my 3com modem to work & I've checked a thousand sites and they all say that my modem is supposed to be config 0x20 "sio1" ? 
: but all it gives me is : driver allocation failed for Toshiba America (3CXM056-BNW) 
: &  the closest I can get is when I change it to config 0x21 "sio1" ? but then it sets it to sio4 which doesn't really exist.. I''m going crazy! please help!!
: 

Andrew (Maria?)-

This is most likely due to an irq problem.  What version of FreeBSD
are using?  What are your relevant kernel entries for sio, pcic, et 
al?  What about dmesg output?  What are the pccard* entries from 
/etc/rc.conf?  Without certain key bits of data, it is hard to fathom 
out what the exact conflicts are.

S
-- 
1--------01---------01--------01--------01--------01--------01--------0
Sean O'Connell                                       sean@stat.Duke.EDU


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 21:51:53 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from socrates.nmia.com (socrates.nmia.com [198.59.166.170])
	by hub.freebsd.org (Postfix) with SMTP id 5B5FC37C1D3
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 21:51:40 -0700 (PDT)
	(envelope-from ripper@nmia.com)
Received: from plato.nmia.com(really [198.59.166.165]) by socrates.nmia.com
	via sendmail with smtp
	id <m13OCDq-002xYpC@socrates.nmia.com>
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 22:51:38 -0600 (MDT)
	(Smail-3.2.0.106 1999-Mar-31 #3 built 1999-Apr-19)
Received:  
        by plato.nmia.com  
        id m13OCDq-0011ZKC; Sun, 13 Aug 2000 22:51:38 -0600 (MDT)
Message-Id: <m13OCDq-0011ZKC@plato.nmia.com>
Subject: thinkpad and mp3 players
To: freebsd-mobile@freebsd.org
Date: Sun, 13 Aug 2000 22:51:38 -0600 (MDT)
From: "Ross A Lippert" <ripper@plato.nmia.com>
X-Mailer: ELM [version 2.5 PL2]
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I have a thinkpad 600x.  Sound was installed with the
pcm driver (pretty much what people in the archives
have).  Sound works as evidenced by xmcd working just great.
However, I haven't found an mp3 player that works.  They all
seem to make the speakers just crackle a lot.

Any suggestions?


-r


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 22:27:16 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from zaphon.llamas.net (zaphon.llamas.net [207.203.36.210])
	by hub.freebsd.org (Postfix) with SMTP id 0136B37BE8B
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 22:27:13 -0700 (PDT)
	(envelope-from grumple@zaphon.llamas.net)
Received: (qmail 4437 invoked by uid 500); 14 Aug 2000 05:27:11 -0000
Date: Sun, 13 Aug 2000 22:27:11 -0700
From: Greg Rumple <grumple@zaphon.llamas.net>
To: mike ryan <msr@elision.org>
Cc: freebsd-mobile@freebsd.org
Subject: Re: okay, I want it 100%
Message-ID: <20000813222711.R28135@zaphon.llamas.net>
References: <20000813194125.P28135@zaphon.llamas.net> <20000813225725.A429@medianstrip.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0us
In-Reply-To: <20000813225725.A429@medianstrip.net>; from msr@elision.org on Sun, Aug 13, 2000 at 10:57:25PM -0400
X-Mailer: Mutt http://www.mutt.org/
X-Editor: Vim http://www.vim.org/
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Thanks, worked like a champ.

Greg

* mike ryan (msr@elision.org) [000814 02:57]:
> On Sun, Aug 13, 2000 at 07:41:25PM -0700, Greg Rumple wrote:
> > 
> > pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem
> > 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
> [...]
> > I am unable to use the sound card after a suspend.
> 
> try the patch at
> 
>     http://www.FreeBSD.org/cgi/query-pr.cgi?pr=20255
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message

-- 
Greg Rumple
grumple@zaphon.llamas.net


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 23: 6: 5 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from vbook.express.ru (vbook.express.ru [212.24.37.106])
	by hub.freebsd.org (Postfix) with ESMTP id D623B37B60D
	for <freebsd-mobile@FreeBSD.ORG>; Sun, 13 Aug 2000 23:05:53 -0700 (PDT)
	(envelope-from vova@vbook.express.ru)
Received: (from vova@localhost)
	by vbook.express.ru (8.9.3/8.9.3) id WAA39603;
	Sun, 13 Aug 2000 22:31:58 +0400 (MSD)
	(envelope-from vova)
From: "Vladimir B. Grebenschikov" <vova@express.ru>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14742.59805.362522.751520@vbook.express.ru>
Date: Sun, 13 Aug 2000 22:31:57 +0400 (MSD)
To: freebsd-mobile@FreeBSD.ORG
Subject: "clock" problem with VAIO
X-Mailer: VM 6.72 under 21.1 (patch 9) "Canyonlands" XEmacs Lucid
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


I have VAIO-Z505S and mention interesting problem:

Sometimes after resume ascpu don't show anything, I've search a bit
and found that systat in mode vmstat says:

          The alternate system clock has died!
          Reverting to ``pigs'' display.

And more, scheduler in this situation works a bit strange, for example
 one make with normal build can stop or almost stop mouse moving in
local X.

But problem can disappear after suspend/resume.

Any ideas ?

--
TSB Russian Express, Moscow
Vladimir B. Grebenschikov, vova@express.ru


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sun Aug 13 23:55:14 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from moek.pir.net (moek.pir.net [209.192.237.190])
	by hub.freebsd.org (Postfix) with ESMTP id 052BE37B74B
	for <freebsd-mobile@freebsd.org>; Sun, 13 Aug 2000 23:55:10 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 13OE9G-0002XG-00
	for freebsd-mobile@freebsd.org; Mon, 14 Aug 2000 02:55:02 -0400
Date: Mon, 14 Aug 2000 02:55:02 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@freebsd.org
Subject: Re: thinkpad and mp3 players
Message-ID: <20000814025502.A9557@pir.net>
Mail-Followup-To: freebsd-mobile@freebsd.org
References: <m13OCDq-0011ZKC@plato.nmia.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <m13OCDq-0011ZKC@plato.nmia.com>; from ripper@plato.nmia.com on Sun, Aug 13, 2000 at 10:51:38PM -0600
X-fish: <darwin><
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Ross A Lippert <ripper@plato.nmia.com> probably said:
> I have a thinkpad 600x.  Sound was installed with the
> pcm driver (pretty much what people in the archives
> have).  Sound works as evidenced by xmcd working just great.
> However, I haven't found an mp3 player that works.  They all
> seem to make the speakers just crackle a lot.
> 
> Any suggestions?

Not a particularly helpful one, but xmcd playing a CD just means your
mixer is working - the sound is not being generated by the machine.

Look to your sound configs, you may need to hardcode settings.

P.

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  2:21:43 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from telinco.net (internal.mail.telinco.net [212.1.128.4])
	by hub.freebsd.org (Postfix) with ESMTP id F1E2A37B7A0
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 02:21:40 -0700 (PDT)
	(envelope-from b.candler@pobox.com)
Received: from pilchards.telinco.net ([212.1.128.253] helo=bloodhound.uk.worldonline.com)
	by telinco.net with esmtp (Exim 3.02 #1)
	id 13OGRD-000PQ9-00; Mon, 14 Aug 2000 10:21:43 +0100
Received: from brian by bloodhound.uk.worldonline.com with local (Exim 3.15 #1)
	id 13OGR5-0000Be-00; Mon, 14 Aug 2000 10:21:35 +0100
Date: Mon, 14 Aug 2000 10:21:34 +0100
From: Brian Candler <B.Candler@pobox.com>
To: Warner Losh <imp@village.org>
Cc: freebsd-mobile@FreeBSD.ORG, shigeru@iij.ad.jp
Subject: Re: Ricoh RL5C475 PCI-PCMCIA adaptor and interrupts
Message-ID: <20000814102134.A517@linnet.org>
References: <20000813210437.A18218@linnet.org> <200008140007.SAA10899@harmony.village.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0.1i
In-Reply-To: <200008140007.SAA10899@harmony.village.org>; from imp@village.org on Sun, Aug 13, 2000 at 06:07:44PM -0600
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Sun, Aug 13, 2000 at 06:07:44PM -0600, Warner Losh wrote:
> In message <20000813210437.A18218@linnet.org> Brian Candler writes:
> : $ dmesg | grep -i pcic
> : pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 11.0 on pci2
> 
> Which version?  Is this a pci card, or a laptop?  Or is it a PCI card
> in a laptop docing bay...

http://www.airstation.com/PRODUCTS/ASINFO/WLAN/WLI-PCI-OP.html

It's a PCI card in a desktop machine, but being a Dell, it's an unusual
design: there is an I/O module with a PCI/ISA daughterboard (around 6
slots), which in turn plugs into the motherboard at right-angles.

        PCI           |
         |            | mother-
         |            | board
         |            |
      ---+-+-+-+-+--- +
      daughterboard   |

Regards,

Brian.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  3:19:47 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from tokyogw.iij.ad.jp (tokyogw.iij.ad.jp [202.232.15.22])
	by hub.freebsd.org (Postfix) with ESMTP id CEB8737B8FD
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 03:19:44 -0700 (PDT)
	(envelope-from shigeru@iij.ad.jp)
Received: by tokyogw.iij.ad.jp; id TAA27097; Mon, 14 Aug 2000 19:19:44 +0900 (JST)
Received: from mercury.iij.ad.jp(192.168.4.89) by tokyogw.iij.ad.jp via smap (V4.2)
	id xma026963; Mon, 14 Aug 00 19:19:00 +0900
Received: from localhost (shigeru@localhost [127.0.0.1])
	by mercury.iij.ad.jp (8.9.3/8.9.3) with ESMTP id TAA06180
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 19:19:00 +0900 (JST)
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricoh RL5C475 PCI-PCMCIA adaptor and interrupts
In-Reply-To: Your message of "Mon, 14 Aug 2000 10:21:34 +0100"
	<20000814102134.A517@linnet.org>
References: <20000814102134.A517@linnet.org>
X-Mailer: Mew version 1.93b38 on XEmacs 21.2 (Shinjuku)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-Id: <20000814191859A.shigeru@iij.ad.jp>
Date: Mon, 14 Aug 2000 19:18:59 +0900
From: YAMAMOTO Shigeru <shigeru@iij.ad.jp>
X-Dispatcher: imput version 991025(IM133)
Lines: 21
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


>>>>> "Brian" == Brian Candler <Brian> writes:
Brian> http://www.airstation.com/PRODUCTS/ASINFO/WLAN/WLI-PCI-OP.html
Brian> It's a PCI card in a desktop machine, but being a Dell, it's an
Brian> unusual design: there is an I/O module with a PCI/ISA
Brian> daughterboard (around 6 slots), which in turn plugs into the
Brian> motherboard at right-angles.

Maybe, you need to allocate I/O space, from 0x03e0 to 0x03e1, and need 
to set allocated I/O space addres to 'Legacy Mode Base Address'
register which is in PCI configuration space of 'PCI to CardBus
Bridge'.
I/O space for pcic must be allocated and assinged before
probing/attaching pcic.
#so, you need to hack source codes. :-)

P.S.
It is the best way to support a CardBus, maybe...
-------
YAMAMOTO Shigeru			Internet Initiative Japan Inc.
<shigeru@iij.ad.jp>			Network Engineering Div.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  3:23:45 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from axl.ops.uunet.co.za (axl.ops.uunet.co.za [196.31.2.163])
	by hub.freebsd.org (Postfix) with ESMTP
	id EEC5F37BDD2; Mon, 14 Aug 2000 03:23:31 -0700 (PDT)
	(envelope-from sheldonh@axl.ops.uunet.co.za)
Received: from sheldonh (helo=axl.ops.uunet.co.za)
	by axl.ops.uunet.co.za with local-esmtp (Exim 3.16 #1)
	id 13OHOD-000Efo-00; Mon, 14 Aug 2000 12:22:41 +0200
From: Sheldon Hearn <sheldonh@uunet.co.za>
To: Randy Bush <randy@psg.com>
Cc: Greg Rumple <grumple@zaphon.llamas.net>,
	Warner Losh <imp@village.org>, Ross Finlayson <finlayson@live.com>,
	freebsd-bugs@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
In-reply-to: Your message of "Sun, 13 Aug 2000 20:08:56 MST."
             <E13OAcS-000IOU-00@rip.psg.com> 
Date: Mon, 14 Aug 2000 12:22:41 +0200
Message-ID: <56407.966248561@axl.ops.uunet.co.za>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org



On Sun, 13 Aug 2000 20:08:56 MST, Randy Bush wrote:

> > wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2bf irq 11 slot 1 on pccard1
> 
> that's pcmcia.  the writer was pci.

Are you sure?  It looks very much like the originator is using PCMCI
hardware and spelled it incorrectly twice. :-)

Ciao,
Sheldon.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  4:39:56 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from lozen.uit.no (lozen.Uit.No [129.242.5.254])
	by hub.freebsd.org (Postfix) with ESMTP id 8142337B982
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 04:39:51 -0700 (PDT)
	(envelope-from Johan.Johansen@cc.uit.no)
Received: from joseph.cc.uit.no (joseph.Cc.Uit.No [129.242.6.242])
	by lozen.uit.no (8.10.1/8.10.1) with ESMTP id e7EBdm517285
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 13:39:48 +0200 (METDST)
Received: from archer.cc.uit.no (archer.Cc.Uit.No [129.242.6.119])
	by joseph.cc.uit.no (8.10.1/8.10.1) with ESMTP id e7EBdlJ14653;
	Mon, 14 Aug 2000 13:39:48 +0200 (METDST)
Received: from archer.cc.uit.no (johan@localhost)
	by archer.cc.uit.no (8.9.3/8.9.3) with ESMTP id NAA06709;
	Mon, 14 Aug 2000 13:39:46 +0200
Message-Id: <200008141139.NAA06709@archer.cc.uit.no>
X-Mailer: exmh version 2.1.2 06/08/2000
To: freebsd-mobile@FreeBSD.ORG
Cc: johanjohansen@cc.uit.no
Subject: trouble using 2 pcmcia-cards
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Mon, 14 Aug 2000 13:39:46 +0200
From: Johan Johansen <Johan.Johansen@cc.uit.no>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Last week I installed a laptop, HP Omnibook 3000, as a router between 
pcmcia-card 3Com
3C574-TX and radio pcmcia-card WaveLAN/IEEE 802.11. This works ok if the 
WaveLAN are
allowed to be probed first and get access to the lowest io-addresses in 
pccard.conf
If my 3Com card are probed first, and the lowest 0x20 io-addresses get 
occupied,
the WaveLAN card init will fail, see below.

To have the WaveLAN card be probed first, I can put it in slot 0. But then 
the
antenna on the card blocks slot 1, so that is no good.

What I do is to boot with only the radio card inserted, and then insert the 
ethernet
card, but it would be nice to be able to boot without me being around.

So, is there a way to make the WaveLAN happy with "second best" 
io-addresses, or
is there a way to probe slot 1 first, or
should I look for some mechanical extension to avoid the radiocard to block 
slot 1?

I use FreeBSD 3.3-RELEASE

My kernel config-lines
device ep0 at isa? port 0x300 net irq 10
device wi0 at isa? port? net irq ?
 #putting in port-addresses here has no effect

My pccard.conf-lines
io      0x240-0x360
irq     3 10 11 13 15

card "Lucent Technologies" "WaveLAN/IEEE"
        config  0x1 "wi0" 11

card "3Com" "3C574-TX Fast EtherLink PC Ca"
        config  0x1 "ep0" 10 0x1

Messages when init fail
Card inserted, slot 0
Slot 0, unfielded interrupt (0)
ep0: No connectors or MII.
ep0: [*UTP*] address 00:60:08:93:b1:b5
Card inserted, slot 1
Slot 1, unfielded interrupt (0)
wi0: <WaveLAN/IEEE 802.11> at 0x260-0x29f irq 11 on isa
wi0: init failed
wi0: Ethernet address: 0b:00:00:00:05:00
wi0: init failed
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed

regards
Johan Johansen




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  5:46:42 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1])
	by hub.freebsd.org (Postfix) with ESMTP id 2325937B591
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 05:46:38 -0700 (PDT)
	(envelope-from hm@hcs.de)
Received: from hcswork.hcs.de (hcswork.hcs.de [192.76.124.5])
	by hcshh.hcs.de (Postfix) with ESMTP
	id ABC6F5D3E; Mon, 14 Aug 2000 14:46:36 +0200 (CEST)
Received: by hcswork.hcs.de (Postfix, from userid 200)
	id 63136482C; Mon, 14 Aug 2000 14:46:36 +0200 (METDST)
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
To: freebsd-mobile@freebsd.org (FreeBSD mobile mailing list)
Date: Mon, 14 Aug 2000 14:46:36 +0200 (METDST)
Cc: susumu@wakabaya.net
Reply-To: hm@hcs.de
Organization: HCS Hanseatischer Computerservice GmbH
X-Mailer: ELM [version 2.4ME+ PL39 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Length: 1170      
Message-Id: <20000814124636.63136482C@hcswork.hcs.de>
From: hm@hcs.de (Hellmuth Michaelis)
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

susumu@wakabaya.net wrote:
> 
> http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz

This patch makes the driver work (at least using wwmixer and wmcdplay) on an
HP Omnibook 6000:

*** maestro/maestro.c	Mon Jul 24 20:20:26 2000
--- maestro-new/maestro.c	Mon Aug 14 10:22:34 2000
***************
*** 49,54 ****
--- 49,55 ----
  #define MAESTRO_1_PCI_ID	0x01001285
  #define MAESTRO_2_PCI_ID	0x1968125d
  #define MAESTRO_2E_PCI_ID	0x1978125d
+ #define MAESTRO_3E_PCI_ID	0x1998125d
  
  #define AGG_MAXPLAYCH	4
  #define AGG_BUFSIZ	(8 << 10)
***************
*** 728,733 ****
--- 729,738 ----
  
  	case MAESTRO_2E_PCI_ID:
  		s = "ESS Technology Maestro-2E";
+ 		break;
+ 
+ 	case MAESTRO_3E_PCI_ID:
+ 		s = "ESS Technology Maestro-3E";
  		break;
  	}
  

The Handbook says about the chips used: ESS Maestro-3E and ESS ES1921.

-- 
Hellmuth Michaelis                                    Tel   +49 40 55 97 47-70
HCS Hanseatischer Computerservice GmbH                Fax   +49 40 55 97 47-77
Oldesloer Strasse 97-99                               Mail  hm [at] hcs.de
D-22457 Hamburg                                       WWW   http://www.hcs.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  5:52:14 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from khavrinen.lcs.mit.edu (khavrinen.lcs.mit.edu [18.24.4.193])
	by hub.freebsd.org (Postfix) with ESMTP
	id E211037B58A; Mon, 14 Aug 2000 05:52:09 -0700 (PDT)
	(envelope-from wollman@khavrinen.lcs.mit.edu)
Received: (from wollman@localhost)
	by khavrinen.lcs.mit.edu (8.9.3/8.9.3) id IAA48970;
	Mon, 14 Aug 2000 08:52:07 -0400 (EDT)
	(envelope-from wollman)
Date: Mon, 14 Aug 2000 08:52:07 -0400 (EDT)
From: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
Message-Id: <200008141252.IAA48970@khavrinen.lcs.mit.edu>
To: Ross Finlayson <finlayson@live.com>
Cc: freebsd-bugs@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
Subject: WaveLAN PCI adaptor hangs 4.1-STABLE
In-Reply-To: <4.3.1.1.20000813030742.00b19d80@localhost>
References: <4.3.1.1.20000813030742.00b19d80@localhost>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

<<On Sun, 13 Aug 2000 03:40:57 -0700, Ross Finlayson <finlayson@live.com> said:

> Has anyone else had problems with a Lucent WaveLAN PCI adaptor card causing 
> FreeBSD 4.1-STABLE to hang?

Yep.  Locked hard -- can't even break to debugger.  I advised the
person who asked me to make it work to buy an ISA card instead, but he
seems to have one of the new PC-99 ``ISA-less'' systems.

-GAWollman



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14  6:42:31 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from socrates.nmia.com (socrates.nmia.com [198.59.166.170])
	by hub.freebsd.org (Postfix) with SMTP id 53DA437C1D6
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 06:42:23 -0700 (PDT)
	(envelope-from ripper@nmia.com)
Received: from plato.nmia.com(really [198.59.166.165]) by socrates.nmia.com
	via sendmail with smtp
	id <m13OKVP-002xZLC@socrates.nmia.com>
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 07:42:19 -0600 (MDT)
	(Smail-3.2.0.106 1999-Mar-31 #3 built 1999-Apr-19)
Received:  
        by plato.nmia.com  
        id m13OKVP-0011ZKC; Mon, 14 Aug 2000 07:42:19 -0600 (MDT)
Message-Id: <m13OKVP-0011ZKC@plato.nmia.com>
Subject: Re: thinkpad and mp3 players
To: pir@pir.net (Peter Radcliffe)
Date: Mon, 14 Aug 2000 07:42:19 -0600 (MDT)
From: "Ross A Lippert" <ripper@plato.nmia.com>
Cc: freebsd-mobile@freebsd.org
In-Reply-To: <20000814025502.A9557@pir.net> from "Peter Radcliffe" at Aug 14, 2000 02:55:02 AM
X-Mailer: ELM [version 2.5 PL2]
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

OK, well, the only stuff I have done to setup the sound is
adding these lines to the kernel config

# sound support
device pcm0 at isa? port 0x52C irq 5 drq 1 flags 0x10

and

> cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Aug 13 2000 20:29:32
Installed devices:
pcm0: <CS461x PCM Audio> at irq 11 (1p/1r channels duplex)

I what settings do you think I should twiddle with?

-r
> 
> Ross A Lippert <ripper@plato.nmia.com> probably said:
> > I have a thinkpad 600x.  Sound was installed with the
> > pcm driver (pretty much what people in the archives
> > have).  Sound works as evidenced by xmcd working just great.
> > However, I haven't found an mp3 player that works.  They all
> > seem to make the speakers just crackle a lot.
> > 
> > Any suggestions?
> 
> Not a particularly helpful one, but xmcd playing a CD just means your
> mixer is working - the sound is not being generated by the machine.
> 
> Look to your sound configs, you may need to hardcode settings.
> 
> P.
> 
> -- 
> pir                  pir@pir.net                    pir@net.tufts.edu
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 10:26:58 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP
	id A577837B87C; Mon, 14 Aug 2000 10:26:52 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA23156;
	Mon, 14 Aug 2000 11:26:48 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA67907; Mon, 14 Aug 2000 11:26:08 -0600 (MDT)
Message-Id: <200008141726.LAA67907@harmony.village.org>
To: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
Cc: Ross Finlayson <finlayson@live.com>, freebsd-bugs@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Mon, 14 Aug 2000 08:52:07 EDT."
		<200008141252.IAA48970@khavrinen.lcs.mit.edu> 
References: <200008141252.IAA48970@khavrinen.lcs.mit.edu>  <4.3.1.1.20000813030742.00b19d80@localhost> 
Date: Mon, 14 Aug 2000 11:26:08 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <200008141252.IAA48970@khavrinen.lcs.mit.edu> Garrett Wollman writes:
: <<On Sun, 13 Aug 2000 03:40:57 -0700, Ross Finlayson <finlayson@live.com> said:
: 
: > Has anyone else had problems with a Lucent WaveLAN PCI adaptor card causing 
: > FreeBSD 4.1-STABLE to hang?
: 
: Yep.  Locked hard -- can't even break to debugger.  I advised the
: person who asked me to make it work to buy an ISA card instead, but he
: seems to have one of the new PC-99 ``ISA-less'' systems.

That's the failure mode I'm seeing here as well.  Except I have ISA
slots :-)

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 10:28:55 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rip.psg.com (rip.psg.com [147.28.0.39])
	by hub.freebsd.org (Postfix) with ESMTP
	id F2BA037BD89; Mon, 14 Aug 2000 10:28:50 -0700 (PDT)
	(envelope-from randy@psg.com)
Received: from randy by rip.psg.com with local (Exim 3.13 #1)
	id 13OO2S-000OZA-00; Mon, 14 Aug 2000 10:28:40 -0700
From: Randy Bush <randy@psg.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: Warner Losh <imp@village.org>
Cc: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>,
	Ross Finlayson <finlayson@live.com>, freebsd-bugs@FreeBSD.ORG,
	freebsd-mobile@FreeBSD.ORG
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
References: <200008141252.IAA48970@khavrinen.lcs.mit.edu>
	<4.3.1.1.20000813030742.00b19d80@localhost>
	<200008141726.LAA67907@harmony.village.org>
Message-Id: <E13OO2S-000OZA-00@rip.psg.com>
Date: Mon, 14 Aug 2000 10:28:40 -0700
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

wait a sec.  4.1-stable with roamabout isa works here and has for a loooong
time.

randy


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 10:33: 7 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP
	id 3145D37B87C; Mon, 14 Aug 2000 10:32:59 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA23196;
	Mon, 14 Aug 2000 11:32:57 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA67977; Mon, 14 Aug 2000 11:32:17 -0600 (MDT)
Message-Id: <200008141732.LAA67977@harmony.village.org>
To: Randy Bush <randy@psg.com>
Subject: Re: WaveLAN PCI adaptor hangs 4.1-STABLE 
Cc: freebsd-bugs@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Mon, 14 Aug 2000 10:28:40 PDT."
		<E13OO2S-000OZA-00@rip.psg.com> 
References: <E13OO2S-000OZA-00@rip.psg.com>  <200008141252.IAA48970@khavrinen.lcs.mit.edu> <4.3.1.1.20000813030742.00b19d80@localhost> <200008141726.LAA67907@harmony.village.org> 
Date: Mon, 14 Aug 2000 11:32:17 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <E13OO2S-000OZA-00@rip.psg.com> Randy Bush writes:
: wait a sec.  4.1-stable with roamabout isa works here and has for a loooong
: time.

Right.  The problem isn't the ISA card, but rather the PCI card.  I
have the PCI card and have recreated the problem.  I haven't solved
the problem.  It may be that we'll have to set a hint for the card so
that we can kick it into PCI interrupt mode rather than ISA interrupt
mode.  I've not had the time lately to play with this, since too much
life is happening right now.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 12: 4:14 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from socrates.nmia.com (socrates.nmia.com [198.59.166.170])
	by hub.freebsd.org (Postfix) with SMTP
	id 35A3837BEBA; Mon, 14 Aug 2000 12:04:04 -0700 (PDT)
	(envelope-from ripper@nmia.com)
Received: from plato.nmia.com(really [198.59.166.165]) by socrates.nmia.com
	via sendmail with smtp
	id <m13OPWb-002xYhC@socrates.nmia.com>
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 13:03:53 -0600 (MDT)
	(Smail-3.2.0.106 1999-Mar-31 #3 built 1999-Apr-19)
Received:  
        by plato.nmia.com  
        id m13OPWb-0011ZKC; Mon, 14 Aug 2000 13:03:53 -0600 (MDT)
Message-Id: <m13OPWb-0011ZKC@plato.nmia.com>
Subject: Re: sound on 600e
To: roman@xpert.com (Roman Shterenzon)
Date: Mon, 14 Aug 2000 13:03:53 -0600 (MDT)
From: "Ross A Lippert" <ripper@plato.nmia.com>
Cc: freebsd-mobile@freebsd.org, freebsd-multimedia@freebsd.org
In-Reply-To: <Pine.BSF.4.21.0008141843360.45636-100000@excalibur.oven.org> from "Roman Shterenzon" at Aug 14, 2000 06:45:31 PM
X-Mailer: ELM [version 2.5 PL2]
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


Hey that almost works for the 600X.  Right now I am having this
hickupping problem with .wav files (and maybe with other files, I
don't have too many samples).  

I did your suggestions and rebooted, and now the sound is definitely
not a crackle, yet when I "splay foo.wav" foo gets played in a repeating
sort of way.

Like, if the sample were "this is a sample", splay would have output
"this is this is this is this is this is this is..."
or "is a is a is a is a ..."
xmms does better with
"this is a sample ample ample ample ample"

-r
> 
> Hi,
> I've thinkpad 600e, and adding these two lines to kernel configuration
> makes it work:
> 
> device pcm
> device csa
> options PNPBIOS
> 
> I'm not subscribed to the mobile mailing list, if you've got a better
> suggestion, please forward it to me.
> 
> --Roman Shterenzon, UNIX System Administrator and Consultant
> [ Xpert UNIX Systems Ltd., Herzlia, Israel. Tel: +972-9-9522361 ]
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 14:51:42 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [207.113.133.231])
	by hub.freebsd.org (Postfix) with ESMTP id E0FF437B664
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 14:51:38 -0700 (PDT)
	(envelope-from insane@lunatic.oneinsane.net)
Received: by lunatic.oneinsane.net (Postfix, from userid 1000)
	id 891F915510; Mon, 14 Aug 2000 14:51:32 -0700 (PDT)
Date: Mon, 14 Aug 2000 14:51:32 -0700
From: Ron 'The InSaNe One' Rosson <insane@lunatic.oneinsane.net>
To: freebsd-mobile@freebsd.org
Subject: Ricochet Setup
Message-ID: <20000814145132.A52689@lunatic.oneinsane.net>
Reply-To: Ron Rosson <insane@lunatic.oneinsane.net>
Mail-Followup-To: freebsd-mobile@freebsd.org
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
X-Operating-System: FreeBSD lunatic.oneinsane.net 4.0-STABLE
X-Moon: The Moon is Full
X-Opinion: What you read here is my IMHO 
X-WWW: http://www.oneinsane.net
X-GPG-FINGERPRINT: 3F11 DB43 F080 C037 96F0  F8D3 5BD2 652B 171C 86DB
X-Uptime: 2:50PM  up 12 days, 22:28, 1 user, load averages: 1.04, 1.05, 1.06
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Has anyone had the pleasure of playing with the Ricoshet modes either
via the serial port or the USB port under FreeBSD. If so was there
anything special you had todo.

Reason for asking I might get to demo one and I can get more info out of
it if I can use it under FreeBSD instead of Windows.

TIA
-- 
------------------------------------------------------------------------------
Ron Rosson          			      ... and a UNIX user said ...
The InSaNe One                 			      rm -rf *
insane@oneinsane.net     	            and all was /dev/null and *void()
------------------------------------------------------------------------------
		 Anarcho-Capitalist for sale or rent.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 15: 5: 1 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from kermodei.com (kermodei.com [216.103.110.74])
	by hub.freebsd.org (Postfix) with ESMTP id BA52E37B64A
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 15:04:57 -0700 (PDT)
	(envelope-from markd@Kermodei.com)
Received: (from markd@localhost)
	by kermodei.com (8.9.3/8.9.3) id PAA66698;
	Mon, 14 Aug 2000 15:04:46 -0700 (PDT)
	(envelope-from markd@Kermodei.com)
From: Mark Diekhans <markd@Kermodei.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14744.27901.568115.495414@osprey.Kermodei.Com>
Date: Mon, 14 Aug 2000 15:04:45 -0700 (PDT)
To: Ron Rosson <insane@lunatic.oneinsane.net>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
In-Reply-To: <20000814145132.A52689@lunatic.oneinsane.net>
References: <20000814145132.A52689@lunatic.oneinsane.net>
X-Mailer: VM 6.75 under Emacs 20.7.1
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Ron 'The InSaNe One' Rosson <insane@lunatic.oneinsane.net> writes:
> Has anyone had the pleasure of playing with the Ricoshet modes either
> via the serial port or the USB port under FreeBSD. If so was there
> anything special you had todo.
> 
> Reason for asking I might get to demo one and I can get more info out of
> it if I can use it under FreeBSD instead of Windows.


I have used a Ricochet for years with FreeBSD on a serial port and it works
great.  Encosed is the ppp.conf entry I use.  However, I just got a notebook
without a built-in serial port (its on the port expander), so the old Ricochet
is no longer useful.  To my knowledge, the USB ones are not generally
available yet, so it would be good to hear how well it works.

ricochet:
    set device /dev/cuaa0
    set speed 38400
    add default HISADDR
    enable dns
    set dial "\"\" ATDT777 CONNECT"


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 15:16:19 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from moek.pir.net (moek.pir.net [209.192.237.190])
	by hub.freebsd.org (Postfix) with ESMTP id 9EC9737B63C
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 15:16:14 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 13OSWi-0007gP-00
	for freebsd-mobile@FreeBSD.ORG; Mon, 14 Aug 2000 18:16:12 -0400
Date: Mon, 14 Aug 2000 18:16:12 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
Message-ID: <20000814181612.C26906@pir.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.ORG
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <14744.27901.568115.495414@osprey.Kermodei.Com>; from markd@Kermodei.com on Mon, Aug 14, 2000 at 03:04:45PM -0700
X-fish: <darwin><
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Mark Diekhans <markd@Kermodei.com> probably said:
> I have used a Ricochet for years with FreeBSD on a serial port and
> it works great.  Encosed is the ppp.conf entry I use.  However, I
> just got a notebook without a built-in serial port (its on the port
> expander), so the old Ricochet is no longer useful.  To my
> knowledge, the USB ones are not generally available yet, so it would
> be good to hear how well it works.

I hear rumours that Metricom have an agreement with a company to make
pcmcia Ricochet modems, and there is brief mention of pcmcia in the
tech section of Metricom's web pages ... hopefully they'll be
available soonish.

I believe the USB ones are available for the 128k stuff currently only
available in San Jose, IIRC.

P.

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 15:30: 9 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from barmetta.skmdc.net (barmetta.skmdc.net [209.21.47.130])
	by hub.freebsd.org (Postfix) with ESMTP id 3F19137B5AF
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 15:30:02 -0700 (PDT)
	(envelope-from bryan@barmetta.com)
Received: (from bryan@localhost)
	by barmetta.skmdc.net (8.9.3/8.9.3) id PAA97699;
	Mon, 14 Aug 2000 15:29:43 -0700 (PDT)
	(envelope-from bryan)
Date: Mon, 14 Aug 2000 15:29:43 -0700
From: "bryan d. o'connor" <ml@barmetta.com>
To: Peter Radcliffe <pir@pir.net>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
Message-ID: <20000814152943.D251@barmetta.com>
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <20000814181612.C26906@pir.net>; from pir@pir.net on Mon, Aug 14, 2000 at 06:16:12PM -0400
X-X: super karate monkey death car
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

| I hear rumours that Metricom have an agreement with a company to make
| pcmcia Ricochet modems, and there is brief mention of pcmcia in the
| tech section of Metricom's web pages ... hopefully they'll be
| available soonish.

novatel will be making a "merlin" pccard that works on
the ricochet 128k network.

http://www.novatelwireless.com/pcproducts/ricochet.html


                                ...bryan


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 15:38:35 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from moek.pir.net (moek.pir.net [209.192.237.190])
	by hub.freebsd.org (Postfix) with ESMTP id 1515F37B5AF
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 15:38:33 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 13OSsE-000021-00
	for freebsd-mobile@FreeBSD.ORG; Mon, 14 Aug 2000 18:38:26 -0400
Date: Mon, 14 Aug 2000 18:38:25 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
Message-ID: <20000814183825.D26906@pir.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.ORG
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net> <20000814152943.D251@barmetta.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <20000814152943.D251@barmetta.com>; from ml@barmetta.com on Mon, Aug 14, 2000 at 03:29:43PM -0700
X-fish: <darwin><
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

"bryan d. o'connor" <ml@barmetta.com> probably said:
> novatel will be making a "merlin" pccard that works on
> the ricochet 128k network.
> 
> http://www.novatelwireless.com/pcproducts/ricochet.html

Ah, goodo :)

] AT command interface / PPP protocol 

Hopefully this means it should just look like a modem card and work
fine under freebsd like the serial ones do ...

P. .. waiting for ricochet in boston.

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 17:48: 5 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from artsnet.heinz.cmu.edu (ARTSNET.HEINZ.CMU.EDU [204.194.31.35])
	by hub.freebsd.org (Postfix) with ESMTP id 6B39E37B889
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 17:47:54 -0700 (PDT)
	(envelope-from douglas@artswire.org)
Received: from 410wk (w238.z216112229.nyc-ny.dsl.cnc.net [216.112.229.238])
	by artsnet.heinz.cmu.edu (8.9.3+Sun/8.9.3) with SMTP id UAA14347
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 20:48:45 -0400 (EDT)
From: "Douglas Cohen" <douglas@artswire.org>
To: <freebsd-mobile@FreeBSD.ORG>
Subject: How to setup two PCCard Ethernet Adapters under 4.0 Current
Date: Mon, 14 Aug 2000 21:07:23 -0400
Message-ID: <003c01c00655$2bd9e160$0905a8c0@410wk>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0)
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400
Importance: Normal
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Perhaps what I want to do isn't possible, but I thought I'd ask here anyway
just to be sure (I posted the message below to freebsd-questions twice and
no one had an answer).  Thank you for any help you can provide.
-----
I'm having trouble getting two 3Com PCCard Ethernet adapters to function at
the same time in my Toshiba Satellite Pro 400 CS.  Either card works fine if
they are alone in the computer, but when they are both in during startup,
only the first card is configured and the system indicates that there are no
resources available for the second card.  The startup messages look like
this:

May 24 08:42:35 nsy /kernel: pccard: card inserted, slot 0
May 24 08:42:35 nsy /kernel: pccard: card inserted, slot 1
May 24 08:42:40 nsy sshd[179]: Listener created on port 22.
May 24 08:42:40 nsy sshd[180]: Daemon is running.
May 24 08:42:42 nsy /kernel: ep0: <3Com Etherlink III 3C589> at port
0x240-0x24f irq 5 slot 0 on pccard0
May 24 08:42:42 nsy /kernel: ep0: Ethernet address 00:10:4b:a0:54:ed
May 24 08:42:42 nsy /kernel: ep0: supplying EUI64: 00:10:4b:ff:fe:a0:54:ed
May 24 08:42:42 nsy pccard:ep0: 3Com Etherlink III inserted
May 24 08:42:42 nsy /kernel: ep0: starting DAD for
fe80:000a::0210:4bff:fea0:54ed
May 24 08:42:43 nsy /kernel: ep0: DAD complete for
fe80:000a::0210:4bff:fea0:54ed - no duplicates found
May 24 08:42:47 nsy pccardd[46]: No free configuration for card 3Com
May 24 08:42:47 nsy pccardd[46]: pccardd started

There seems to be two problems:

1 - How to have FreeBSD allocate resources to both PCCards?  (There are
plenty of resources available, especially as the motherboard sound, lpt and
com ports have all been disabled in system setup.)

2 - Once the second Ethernet card is working, how is it configured for
TCP/IP?  The lines used in the /etc/rc.conf file don't indicate how they can
be applied to a specific Ethernet adapter (in this case it would be ep0 and
ep1).  Here are the relevant lines from /etc/rc.conf:

pccard_ifconfig="inet xxx.xxx.xxx.xxx netmask 255.255.255.0"
pccard_enable="YES"
pccardd_flags="-i 5 -i 11"
pccard_mem="DEFAULT"

Thank you for your help!

Best,
Doug



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 18:31:32 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from smtp1.san.rr.com (smtp1.san.rr.com [24.25.195.37])
	by hub.freebsd.org (Postfix) with ESMTP id F10E737BB7A
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 18:31:22 -0700 (PDT)
	(envelope-from erich@ucsd.edu)
Received: from ucsd.edu ([24.30.147.34]) by smtp1.san.rr.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35)
          with ESMTP id com; Mon, 14 Aug 2000 18:31:35 -0700
Message-ID: <39989D50.CC6E88F9@ucsd.edu>
Date: Mon, 14 Aug 2000 18:30:56 -0700
From: unsafe at any speed <erich@ucsd.edu>
X-Mailer: Mozilla 4.74 [en] (Win95; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Douglas Cohen <douglas@artswire.org>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: How to setup two PCCard Ethernet Adapters under 4.0 Current
References: <003c01c00655$2bd9e160$0905a8c0@410wk>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Hi Doug,
I have a similar setup with two 3com 3c589's in a Thinkpad 701. My system is
still running FreeBSD 3.4 because it works and I haven't been brave enough to
try it with 4.x yet. 

The first problem you describe doesn't come up in my case because I have one
3c589C and one 3c589D, which have different pccard.conf entries.

I have inelegant hacks to get around the second problem you describe through
brute force.

pccard.conf:
-------
# 3Com Etherlink III 3C589B, 3C589C
card "3Com Corporation" "3C589"
        config  0x1 "ep0" ?
        insert  echo 3Com Etherlink III inserted
        insert  /etc/pccard_ether ep0 -link0 link1
        insert  /etc/start_if.ep0
        remove  echo 3Com Etherlink III removed
        remove  /sbin/ifconfig ep0 delete

# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
        config  0x1 "ep1" ?
        insert  echo 3Com Etherlink III inserted
        insert  /etc/pccard_ether ep1
        insert  /sbin/ifconfig ep1 inet 192.168.1.1
        insert  /usr/local/sbin/dhcps ep1
        remove  echo 3Com Etherlink III removed
        remove  /sbin/ifconfig ep1 delete
------

start_if.ep0 has lines to start a dhcp client and natd on ep0.

rc.conf says,
pccard_enable="YES"
pccard_ifconfig="NO"

hope this helps,
eric

Eric Hedstrom
erich@ucsd.edu

Douglas Cohen wrote:
> 
> Perhaps what I want to do isn't possible, but I thought I'd ask here anyway
> just to be sure (I posted the message below to freebsd-questions twice and
> no one had an answer).  Thank you for any help you can provide.
> -----
> I'm having trouble getting two 3Com PCCard Ethernet adapters to function at
> the same time in my Toshiba Satellite Pro 400 CS.  Either card works fine if
> they are alone in the computer, but when they are both in during startup,
> only the first card is configured and the system indicates that there are no
> resources available for the second card.  The startup messages look like
> this:
> 
> May 24 08:42:35 nsy /kernel: pccard: card inserted, slot 0
> May 24 08:42:35 nsy /kernel: pccard: card inserted, slot 1
> May 24 08:42:40 nsy sshd[179]: Listener created on port 22.
> May 24 08:42:40 nsy sshd[180]: Daemon is running.
> May 24 08:42:42 nsy /kernel: ep0: <3Com Etherlink III 3C589> at port
> 0x240-0x24f irq 5 slot 0 on pccard0
> May 24 08:42:42 nsy /kernel: ep0: Ethernet address 00:10:4b:a0:54:ed
> May 24 08:42:42 nsy /kernel: ep0: supplying EUI64: 00:10:4b:ff:fe:a0:54:ed
> May 24 08:42:42 nsy pccard:ep0: 3Com Etherlink III inserted
> May 24 08:42:42 nsy /kernel: ep0: starting DAD for
> fe80:000a::0210:4bff:fea0:54ed
> May 24 08:42:43 nsy /kernel: ep0: DAD complete for
> fe80:000a::0210:4bff:fea0:54ed - no duplicates found
> May 24 08:42:47 nsy pccardd[46]: No free configuration for card 3Com
> May 24 08:42:47 nsy pccardd[46]: pccardd started
> 
> There seems to be two problems:
> 
> 1 - How to have FreeBSD allocate resources to both PCCards?  (There are
> plenty of resources available, especially as the motherboard sound, lpt and
> com ports have all been disabled in system setup.)
> 
> 2 - Once the second Ethernet card is working, how is it configured for
> TCP/IP?  The lines used in the /etc/rc.conf file don't indicate how they can
> be applied to a specific Ethernet adapter (in this case it would be ep0 and
> ep1).  Here are the relevant lines from /etc/rc.conf:
> 
> pccard_ifconfig="inet xxx.xxx.xxx.xxx netmask 255.255.255.0"
> pccard_enable="YES"
> pccardd_flags="-i 5 -i 11"
> pccard_mem="DEFAULT"
> 
> Thank you for your help!
> 
> Best,
> Doug
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 19:27:30 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from whizzo.transsys.com (whizzo.TransSys.COM [144.202.42.10])
	by hub.freebsd.org (Postfix) with ESMTP id 5757337B7D1
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 19:27:20 -0700 (PDT)
	(envelope-from louie@whizzo.transsys.com)
Received: from whizzo.transsys.com (localhost.transsys.com [127.0.0.1])
	by whizzo.transsys.com (8.9.3/8.9.1) with ESMTP id WAA10328
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 22:27:16 -0400 (EDT)
	(envelope-from louie@whizzo.transsys.com)
Message-Id: <200008150227.WAA10328@whizzo.transsys.com>
X-Mailer: exmh version 2.1.1 10/15/1999
To: freebsd-mobile@FreeBSD.ORG
X-Image-URL: http://www.transsys.com/louie/images/louie-mail.jpg
From: "Louis A. Mamakos" <louie@TransSys.COM>
Subject: Re: Ricochet Setup 
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net> 
In-reply-to: Your message of "Mon, 14 Aug 2000 18:16:12 EDT."
             <20000814181612.C26906@pir.net> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Mon, 14 Aug 2000 22:27:16 -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> Mark Diekhans <markd@Kermodei.com> probably said:
> > I have used a Ricochet for years with FreeBSD on a serial port and
> > it works great.  Encosed is the ppp.conf entry I use.  However, I
> > just got a notebook without a built-in serial port (its on the port
> > expander), so the old Ricochet is no longer useful.  To my
> > knowledge, the USB ones are not generally available yet, so it would
> > be good to hear how well it works.
> 
> I hear rumours that Metricom have an agreement with a company to make
> pcmcia Ricochet modems, and there is brief mention of pcmcia in the
> tech section of Metricom's web pages ... hopefully they'll be
> available soonish.
> 
> I believe the USB ones are available for the 128k stuff currently only
> available in San Jose, IIRC.

They've just (or are about to) turn up production 128Kb/s service in
San Diego and Atlanta; the stuff in the SF Bay area is a test network.

I've got one of the newer Richocet2 modems, and it does work with the
"older" R1 networks deployed in Seattle, SF Bay and Washington DC.  As I
was using it on a Sony C1X with no serial ports, the USB interface was
real important for me.  The USB interface for the modem simply looks like
a USB serial device.  Under windows, you can fire up a terminal emulator
on the serial port and do the same AT commands as before.

It's great news about the Novatel announcement; that will be very cool
when it's available.  I'm on their technical advisory board, so if there's
some info you'd like me to pass along, let me know. 

louie


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 19:39: 7 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from moek.pir.net (moek.pir.net [209.192.237.190])
	by hub.freebsd.org (Postfix) with ESMTP id A239737B440
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 19:38:53 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 13OWcp-0001LW-00
	for freebsd-mobile@FreeBSD.ORG; Mon, 14 Aug 2000 22:38:47 -0400
Date: Mon, 14 Aug 2000 22:38:47 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
Message-ID: <20000814223847.E2087@pir.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.ORG
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net> <200008150227.WAA10328@whizzo.transsys.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <200008150227.WAA10328@whizzo.transsys.com>; from louie@TransSys.COM on Mon, Aug 14, 2000 at 10:27:16PM -0400
X-fish: <darwin><
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

"Louis A. Mamakos" <louie@TransSys.COM> probably said:
> I've got one of the newer Richocet2 modems, and it does work with the
> "older" R1 networks deployed in Seattle, SF Bay and Washington DC.  As I
> was using it on a Sony C1X with no serial ports, the USB interface was
> real important for me.  The USB interface for the modem simply looks like
> a USB serial device.  Under windows, you can fire up a terminal emulator
> on the serial port and do the same AT commands as before.

Is there support for the USB device under freebsd ?

> It's great news about the Novatel announcement; that will be very cool
> when it's available.  I'm on their technical advisory board, so if there's
> some info you'd like me to pass along, let me know. 

I don't think "I want the boston network on !" would be very useful ;)

Just the usual of making sure theres free unix support - specs
available, that kind of thing.

P.

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 19:56:42 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from whizzo.transsys.com (whizzo.TransSys.COM [144.202.42.10])
	by hub.freebsd.org (Postfix) with ESMTP id 5928237B5C7
	for <freebsd-mobile@FreeBSD.ORG>; Mon, 14 Aug 2000 19:56:39 -0700 (PDT)
	(envelope-from louie@whizzo.transsys.com)
Received: from whizzo.transsys.com (localhost.transsys.com [127.0.0.1])
	by whizzo.transsys.com (8.9.3/8.9.1) with ESMTP id WAA58628;
	Mon, 14 Aug 2000 22:56:36 -0400 (EDT)
	(envelope-from louie@whizzo.transsys.com)
Message-Id: <200008150256.WAA58628@whizzo.transsys.com>
X-Mailer: exmh version 2.1.1 10/15/1999
To: Peter Radcliffe <pir@pir.net>
Cc: freebsd-mobile@FreeBSD.ORG
X-Image-URL: http://www.transsys.com/louie/images/louie-mail.jpg
From: "Louis A. Mamakos" <louie@TransSys.COM>
Subject: Re: Ricochet Setup 
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net> <200008150227.WAA10328@whizzo.transsys.com> <20000814223847.E2087@pir.net> 
In-reply-to: Your message of "Mon, 14 Aug 2000 22:38:47 EDT."
             <20000814223847.E2087@pir.net> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Mon, 14 Aug 2000 22:56:36 -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> "Louis A. Mamakos" <louie@TransSys.COM> probably said:
> > I've got one of the newer Richocet2 modems, and it does work with the
> > "older" R1 networks deployed in Seattle, SF Bay and Washington DC.  As I
> > was using it on a Sony C1X with no serial ports, the USB interface was
> > real important for me.  The USB interface for the modem simply looks like
> > a USB serial device.  Under windows, you can fire up a terminal emulator
> > on the serial port and do the same AT commands as before.
> 
> Is there support for the USB device under freebsd ?

I haven't tried the R2 modem specifically on FreeBSD, but I didn't
think there was general support yet for USB serial devices.  There
is no driver to speak of for windows; just an INF file that causes
Windows to use it's existing generic USB serial driver.  I would take
that to mean nothing special would be required on FreeBSD, other than
the generic USB serial driver.

> > It's great news about the Novatel announcement; that will be very cool
> > when it's available.  I'm on their technical advisory board, so if there's
> > some info you'd like me to pass along, let me know. 
> 
> I don't think "I want the boston network on !" would be very useful ;)

I'm waiting for the Baltimore area to turn up myself.  I've seen "Men
In Trucks" doing site survey stuff, so it looks like it's coming.  Boston
is also in the the announced list of cities they're doing in the
first wave of a dozen or so.

> Just the usual of making sure theres free unix support - specs
> available, that kind of thing.

Will do.  I know they previously did a great job of document the AT
command set for the original modems, and hope (and will encourage them)
to do the same with the R2 modems.

louie


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Mon Aug 14 20:20:29 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from moek.pir.net (moek.pir.net [209.192.237.190])
	by hub.freebsd.org (Postfix) with ESMTP id 4AA9A37B5C7
	for <freebsd-mobile@freebsd.org>; Mon, 14 Aug 2000 20:20:26 -0700 (PDT)
	(envelope-from pir@pir.net)
Received: from pir by moek.pir.net with local (Exim)
	id 13OXH5-0001Yh-00
	for freebsd-mobile@FreeBSD.ORG; Mon, 14 Aug 2000 23:20:23 -0400
Date: Mon, 14 Aug 2000 23:20:22 -0400
From: Peter Radcliffe <pir@pir.net>
To: freebsd-mobile@FreeBSD.ORG
Subject: Re: Ricochet Setup
Message-ID: <20000814232022.F2087@pir.net>
Mail-Followup-To: freebsd-mobile@FreeBSD.ORG
References: <20000814145132.A52689@lunatic.oneinsane.net> <14744.27901.568115.495414@osprey.Kermodei.Com> <20000814181612.C26906@pir.net> <200008150227.WAA10328@whizzo.transsys.com> <20000814223847.E2087@pir.net> <200008150256.WAA58628@whizzo.transsys.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <200008150256.WAA58628@whizzo.transsys.com>; from louie@TransSys.COM on Mon, Aug 14, 2000 at 10:56:36PM -0400
X-fish: <darwin><
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

"Louis A. Mamakos" <louie@TransSys.COM> probably said:
> I haven't tried the R2 modem specifically on FreeBSD, but I didn't
> think there was general support yet for USB serial devices.  There
> is no driver to speak of for windows; just an INF file that causes
> Windows to use it's existing generic USB serial driver.  I would take
> that to mean nothing special would be required on FreeBSD, other than
> the generic USB serial driver.

Sounds good.

> I'm waiting for the Baltimore area to turn up myself.  I've seen "Men
> In Trucks" doing site survey stuff, so it looks like it's coming. 

Not seen anything around here labelled metricom yet ...

> Boston is also in the the announced list of cities they're doing in
> the first wave of a dozen or so.

Yep. I havn't heard a recent time schedule for Boston, though.

> Will do.  I know they previously did a great job of document the AT
> command set for the original modems, and hope (and will encourage them)
> to do the same with the R2 modems.

Great.

P.

-- 
pir                  pir@pir.net                    pir@net.tufts.edu



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15  1:40:26 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from calcaphon.demon.co.uk (calcaphon.demon.co.uk [193.237.19.5])
	by hub.freebsd.org (Postfix) with ESMTP id 4499837B92F
	for <freebsd-mobile@FreeBSD.org>; Tue, 15 Aug 2000 01:40:22 -0700 (PDT)
	(envelope-from n_hibma@qubesoft.com)
Received: from henny.webweaving.org (henny.qubesoft.com [192.168.1.5])
	by calcaphon.demon.co.uk (8.9.3/8.9.1) with ESMTP id JAA43936;
	Tue, 15 Aug 2000 09:40:20 +0100 (BST)
	(envelope-from n_hibma@qubesoft.com)
Received: from localhost (localhost [127.0.0.1])
	by henny.webweaving.org (8.9.3/8.9.3) with ESMTP id JAA02074;
	Tue, 15 Aug 2000 09:38:29 +0100 (BST)
	(envelope-from n_hibma@qubesoft.com)
Date: Tue, 15 Aug 2000 09:38:29 +0100 (BST)
From: Nick Hibma <n_hibma@qubesoft.com>
X-Sender: n_hibma@henny.webweaving.org
Reply-To: Nick Hibma <n_hibma@qubesoft.com>
To: "Louis A. Mamakos" <louie@TransSys.COM>
Cc: Peter Radcliffe <pir@pir.net>, freebsd-mobile@FreeBSD.org
Subject: Re: Ricochet Setup 
In-Reply-To: <200008150256.WAA58628@whizzo.transsys.com>
Message-ID: <Pine.BSF.4.20.0008150936380.1746-100000@henny.webweaving.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


There is no such thing as a generic serial driver. USB sucks
standards-wise.

That the device uses a standard windows driver might be a good sign
though.

Anyone going to be at BSD Con?

Nick

> I haven't tried the R2 modem specifically on FreeBSD, but I didn't
> think there was general support yet for USB serial devices.  There
> is no driver to speak of for windows; just an INF file that causes
> Windows to use it's existing generic USB serial driver.  I would take
> that to mean nothing special would be required on FreeBSD, other than
> the generic USB serial driver.

--
Qube Software, Ltd.                                             Private:
n_hibma@qubesoft.com                              n_hibma@webweaving.org
                                                     n_hibma@freebsd.org
http://www.qubesoft.com/                   http://www.etla.net/~n_hibma/



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15  8: 8:54 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from smtp1b.mail.yahoo.com (smtp3.mail.yahoo.com [128.11.68.135])
	by hub.freebsd.org (Postfix) with SMTP id CD08737B645
	for <freebsd-mobile@freebsd.org>; Tue, 15 Aug 2000 08:08:47 -0700 (PDT)
	(envelope-from lorin_lund@yahoo.com)
Received: from 82-ppp-15.netutah.com (HELO lorins) (207.179.15.82)
  by smtp3.mail.yahoo.com with SMTP; 15 Aug 2000 15:08:41 -0000
X-Apparently-From: <lorin?lund@yahoo.com>
Message-ID: <002101c006cb$e229eca0$0900fea9@lorins.ild.telecom.com>
From: "Lorin Lund" <lorin_lund@yahoo.com>
To: <freebsd-mobile@freebsd.org>
Subject: Linksys 10/100 Ethernet card
Date: Tue, 15 Aug 2000 09:17:03 -0600
MIME-Version: 1.0
Content-Type: multipart/mixed;
	boundary="----=_NextPart_000_001D_01C00699.9483C340"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

This is a multi-part message in MIME format.

------=_NextPart_000_001D_01C00699.9483C340
Content-Type: multipart/alternative;
	boundary="----=_NextPart_001_001E_01C00699.9483C340"


------=_NextPart_001_001E_01C00699.9483C340
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

My card isn't being recognized as far as I can tell.

I have FreeBSD 4.0 installed on a Compaq Presario 1200 XL 118 (AMD cpu =
64 MB ram 6 GB disk - PCMCIA controller is from TI)

My Xircom modem works but I don't see any evidence of the card being =
recognized.

I get this message with all the cards:

No card in database for ""("")

The modem works anyway but the ethernet card isn't working (as judged by =
no entry in output from ifconfig -a and netstat -r)

------=_NextPart_001_001E_01C00699.9483C340
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Dwindows-1252" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR></HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>My card isn't being recognized as far as I can=20
tell.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>I have FreeBSD 4.0 installed on a Compaq Presario =
1200 XL 118=20
(AMD cpu 64 MB ram 6 GB disk - PCMCIA controller is from =
TI)</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>My Xircom modem works but I don't see any evidence =
of the card=20
being recognized.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>I get this message with all the cards:</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>No card in database for ""("")</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=3D2>The modem works anyway but the ethernet card isn't =
working (as=20
judged by no entry in output from ifconfig -a and netstat=20
-r)</FONT></DIV></BODY></HTML>

------=_NextPart_001_001E_01C00699.9483C340--

------=_NextPart_000_001D_01C00699.9483C340
Content-Type: application/octet-stream;
	name="dmesg.out"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
	filename="dmesg.out"
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------=_NextPart_000_001D_01C00699.9483C340
Content-Type: application/octet-stream;
	name="rc.conf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
	filename="rc.conf"

IyBUaGlzIGZpbGUgbm93IGNvbnRhaW5zIGp1c3QgdGhlIG92ZXJyaWRlcyBmcm9tIC9ldGMvZGVm
YXVsdHMvcmMuY29uZgojIHBsZWFzZSBtYWtlIGFsbCBjaGFuZ2VzIHRvIHRoaXMgZmlsZS4KCiMg
LS0gc3lzaW5zdGFsbCBnZW5lcmF0ZWQgZGVsdGFzIC0tICMKaG9zdG5hbWU9IkNvbXBhcV9mYnNk
IgpsaW51eF9lbmFibGU9IllFUyIKZ2F0ZXdheV9lbmFibGU9IllFUyIKcGNjYXJkX2VuYWJsZT0i
WUVTIgpwY2NhcmRfaWZjb25maWc9ImluZXQgMTY5LjI1NC4wLjMgbmV0bWFzayAyNTUuMjU1LjI1
NS4wIgpkZWZhdWx0X3JvdXRlcj0iMTY5LjI1NC4wLjEiCm1vdXNlZF90eXBlPSJhdXRvIgptb3Vz
ZWRfZW5hYmxlPSJZRVMiCiMgLS0gc3lzaW5zdGFsbCBnZW5lcmF0ZWQgZGVsdGFzIC0tICMKYXBt
X2VuYWJsZT0iWUVTIgo=

------=_NextPart_000_001D_01C00699.9483C340--


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15  8:26:13 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id C231037B898
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 15 Aug 2000 08:26:09 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id LAA337448;
	Tue, 15 Aug 2000 11:25:22 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id LAA71714;
	Tue, 15 Aug 2000 11:25:43 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Tue, 15 Aug 2000 11:25:43 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Hellmuth Michaelis <hm@hcs.de>
Cc: FreeBSD mobile mailing list <freebsd-mobile@FreeBSD.ORG>,
	susumu@wakabaya.net
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
In-Reply-To: <20000814124636.63136482C@hcswork.hcs.de>
Message-ID: <Pine.A41.3.96.1000815112431.50074A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Mon, 14 Aug 2000, Hellmuth Michaelis wrote:

> susumu@wakabaya.net wrote:
> > 
> > http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz
> 
> This patch makes the driver work (at least using wwmixer and wmcdplay) on an
> HP Omnibook 6000:

i tried this on a Dell Inspiron 3800, and at the moment all i get is a
really irritating beep that won't stop until i unload the maestro module.
i'll try and play with it more later, but at the moment my office mate is
threatening to kill me ;-)

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 13:14:16 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 81CD837B9D9
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 15 Aug 2000 13:14:13 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id QAA715404;
	Tue, 15 Aug 2000 16:13:31 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id QAA36398;
	Tue, 15 Aug 2000 16:13:52 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Tue, 15 Aug 2000 16:13:52 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Hellmuth Michaelis <hm@hcs.de>
Cc: FreeBSD mobile mailing list <freebsd-mobile@FreeBSD.ORG>,
	susumu@wakabaya.net
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
In-Reply-To: <Pine.A41.3.96.1000815112431.50074A-100000@cortez.sss.rpi.edu>
Message-ID: <Pine.A41.3.96.1000815161127.123014A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Tue, 15 Aug 2000, Garrett Rooney wrote:

> On Mon, 14 Aug 2000, Hellmuth Michaelis wrote:
> 
> > susumu@wakabaya.net wrote:
> > > 
> > > http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz
> > 
> > This patch makes the driver work (at least using wwmixer and wmcdplay) on an
> > HP Omnibook 6000:
> 
> i tried this on a Dell Inspiron 3800, and at the moment all i get is a
> really irritating beep that won't stop until i unload the maestro module.
> i'll try and play with it more later, but at the moment my office mate is
> threatening to kill me ;-)

ok, more news...

after applying the mstr2_gpio and mstr2_spk patches, and adding the pci id
for the Maestro 3E, the really annoying sound is gone, but playing audio
doesn't seem to work.

trying to play an mp3 with mpg123 results in the following error message:

Aug 15 16:13:25 marcus /kernel: pcm0: play interrupt timeout, channel dead

this is on a Dell Inspiron 3800

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 14:47:28 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mta6.snfc21.pbi.net (mta6.snfc21.pbi.net [206.13.28.240])
	by hub.freebsd.org (Postfix) with ESMTP id 98FF937BEA4
	for <mobile@freebsd.org>; Tue, 15 Aug 2000 14:47:25 -0700 (PDT)
	(envelope-from gfish123@pacbell.net)
Received: from uniqsite.com ([63.197.148.179])
 by mta6.snfc21.pbi.net (Sun Internet Mail Server sims.3.5.2000.01.05.12.18.p9)
 with ESMTP id <0FZC005VBS34UW@mta6.snfc21.pbi.net> for mobile@freebsd.org;
 Tue, 15 Aug 2000 14:37:52 -0700 (PDT)
Date: Tue, 15 Aug 2000 14:38:16 -0700 (PDT)
From: Gorden Fischer <gfish123@pacbell.net>
Subject: Making kern.flp floppy for a USB drive
X-Sender: gfish123@uniqsite.com
To: Mobile Mailing List <mobile@freebsd.org>
Message-id: <Pine.BSF.4.21.0008151426070.6021-100000@uniqsite.com>
MIME-version: 1.0
Content-type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I am attempting to create kern.flp disk under 4.1-RELEASE with
my Vaio z505s USB drive.  The info by Jim Mock on 

http://www.freebsdzine.org/200005/usb_floppy.php3 

proved to be very useful.  The question arised when I failed to make a
dump from kern.flp to the floppy (i.e., /dev/da0).  Is there any right
way to do it?  I finally made it on another workstation.

Although it's not a must-have question, I still like to know if there's a
way.  Please cc me.

Fischer





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 14:52:30 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mass.osd.bsdi.com (adsl-63-202-177-115.dsl.snfc21.pacbell.net [63.202.177.115])
	by hub.freebsd.org (Postfix) with ESMTP id A23DD37BC50
	for <mobile@freebsd.org>; Tue, 15 Aug 2000 14:52:22 -0700 (PDT)
	(envelope-from msmith@mass.osd.bsdi.com)
Received: from mass.osd.bsdi.com (localhost [127.0.0.1])
	by mass.osd.bsdi.com (8.9.3/8.9.3) with ESMTP id PAA15010;
	Tue, 15 Aug 2000 15:03:57 -0700 (PDT)
	(envelope-from msmith@mass.osd.bsdi.com)
Message-Id: <200008152203.PAA15010@mass.osd.bsdi.com>
X-Mailer: exmh version 2.1.1 10/15/1999
To: Gorden Fischer <gfish123@pacbell.net>
Cc: Mobile Mailing List <mobile@freebsd.org>
Subject: Re: Making kern.flp floppy for a USB drive 
In-reply-to: Your message of "Tue, 15 Aug 2000 14:38:16 PDT."
             <Pine.BSF.4.21.0008151426070.6021-100000@uniqsite.com> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Tue, 15 Aug 2000 15:03:57 -0700
From: Mike Smith <msmith@freebsd.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> I am attempting to create kern.flp disk under 4.1-RELEASE with
> my Vaio z505s USB drive.  The info by Jim Mock on 
> 
> http://www.freebsdzine.org/200005/usb_floppy.php3 
> 
> proved to be very useful.  The question arised when I failed to make a
> dump from kern.flp to the floppy (i.e., /dev/da0).  Is there any right
> way to do it?  I finally made it on another workstation.
> 
> Although it's not a must-have question, I still like to know if there's a
> way.  Please cc me.

dd if=kern.flp of=/dev/da0 

should do the trick.

-- 
... every activity meets with opposition, everyone who acts has his
rivals and unfortunately opponents also.  But not because people want
to be opponents, rather because the tasks and relationships force
people to take different points of view.  [Dr. Fritz Todt]




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 19:37: 9 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from whizzo.transsys.com (whizzo.TransSys.COM [144.202.42.10])
	by hub.freebsd.org (Postfix) with ESMTP id 7297D37BDB2
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 15 Aug 2000 19:37:06 -0700 (PDT)
	(envelope-from louie@whizzo.transsys.com)
Received: from whizzo.transsys.com (localhost.transsys.com [127.0.0.1])
	by whizzo.transsys.com (8.11.0/8.11.0) with ESMTP id e7G2b2606373;
	Tue, 15 Aug 2000 22:37:02 -0400 (EDT)
	(envelope-from louie@whizzo.transsys.com)
Message-Id: <200008160237.e7G2b2606373@whizzo.transsys.com>
X-Mailer: exmh version 2.1.1 10/15/1999
To: Nick Hibma <n_hibma@qubesoft.com>
Cc: Peter Radcliffe <pir@pir.net>, freebsd-mobile@FreeBSD.ORG
X-Image-URL: http://www.transsys.com/louie/images/louie-mail.jpg
From: "Louis A. Mamakos" <louie@TransSys.COM>
Subject: Re: Ricochet Setup 
References: <Pine.BSF.4.20.0008150936380.1746-100000@henny.webweaving.org> 
In-reply-to: Your message of "Tue, 15 Aug 2000 09:38:29 BST."
             <Pine.BSF.4.20.0008150936380.1746-100000@henny.webweaving.org> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Tue, 15 Aug 2000 22:37:02 -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> 
> There is no such thing as a generic serial driver. USB sucks
> standards-wise.
> 
> That the device uses a standard windows driver might be a good sign
> though.

I'll have to hook it up to the CATC analyzer one day when I have
the CATC's laptop, my laptop, Richocet modem all in the same place
at the same time with Ricochet coverage and see what happens.

> Anyone going to be at BSD Con?

Hope to be!  Last year's FreeBSDcon was great!

louie




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 19:47:16 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from imo-d01.mx.aol.com (imo-d01.mx.aol.com [205.188.157.33])
	by hub.freebsd.org (Postfix) with ESMTP id E033537B91F
	for <freebsd-mobile@freebsd.org>; Tue, 15 Aug 2000 19:47:12 -0700 (PDT)
	(envelope-from Xpresspt@aol.com)
Received: from Xpresspt@aol.com
	by imo-d01.mx.aol.com (mail_out_v27.12.) id n.2f.9471dd6 (9665)
	 for <freebsd-mobile@freebsd.org>; Tue, 15 Aug 2000 22:47:06 -0400 (EDT)
From: Xpresspt@aol.com
Message-ID: <2f.9471dd6.26cb5aaa@aol.com>
Date: Tue, 15 Aug 2000 22:47:06 EDT
Subject: locked in safe mode
To: freebsd-mobile@freebsd.org
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
X-Mailer: AOL 5.0 for Windows sub 118
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

don't have any idea how to get help......cannot get system out of the 
start-up "safe mode".  Any suggestions?



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 23:12:10 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1])
	by hub.freebsd.org (Postfix) with ESMTP id E6C6737B723
	for <freebsd-mobile@FreeBSD.ORG>; Tue, 15 Aug 2000 23:11:59 -0700 (PDT)
	(envelope-from hm@hcs.de)
Received: from hcswork.hcs.de (hcswork.hcs.de [192.76.124.5])
	by hcshh.hcs.de (Postfix) with ESMTP
	id CC2915D3E; Wed, 16 Aug 2000 08:11:54 +0200 (CEST)
Received: by hcswork.hcs.de (Postfix, from userid 200)
	id 89019483B; Wed, 16 Aug 2000 08:11:54 +0200 (METDST)
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
In-Reply-To: <Pine.A41.3.96.1000815112431.50074A-100000@cortez.sss.rpi.edu> from Garrett Rooney at "Aug 15, 0 11:25:43 am"
To: rooneg@rpi.edu (Garrett Rooney)
Date: Wed, 16 Aug 2000 08:11:54 +0200 (METDST)
Cc: hm@hcs.de, freebsd-mobile@FreeBSD.ORG, susumu@wakabaya.net
Reply-To: hm@hcs.de
Organization: HCS Hanseatischer Computerservice GmbH
X-Mailer: ELM [version 2.4ME+ PL39 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Length: 874       
Message-Id: <20000816061154.89019483B@hcswork.hcs.de>
From: hm@hcs.de (Hellmuth Michaelis)
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

From the keyboard of Garrett Rooney:

> > susumu@wakabaya.net wrote:
> > > 
> > > http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz
> > 
> > This patch makes the driver work (at least using wwmixer and wmcdplay) on an
> > HP Omnibook 6000:
> 
> i tried this on a Dell Inspiron 3800, and at the moment all i get is a
> really irritating beep that won't stop until i unload the maestro module.

I had this too, this beep was on a single channel (didn't remeber which one)
and i just set the volume on this channel to 0.

hellmuth
-- 
Hellmuth Michaelis                                    Tel   +49 40 55 97 47-70
HCS Hanseatischer Computerservice GmbH                Fax   +49 40 55 97 47-77
Oldesloer Strasse 97-99                               Mail  hm [at] hcs.de
D-22457 Hamburg                                       WWW   http://www.hcs.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Tue Aug 15 23:14:53 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from hand.dotat.at (sfo-gw.covalent.net [207.44.198.62])
	by hub.freebsd.org (Postfix) with ESMTP id C834137C079
	for <freebsd-mobile@freebsd.org>; Tue, 15 Aug 2000 23:14:41 -0700 (PDT)
	(envelope-from fanf@dotat.at)
Received: from fanf by hand.dotat.at with local (Exim 3.15 #3)
	id 13OwSq-00008i-00; Wed, 16 Aug 2000 06:14:12 +0000
Date: Wed, 16 Aug 2000 06:14:12 +0000
From: Tony Finch <dot@dotat.at>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: Hellmuth Michaelis <hm@hcs.de>,
	FreeBSD mobile mailing list <freebsd-mobile@FreeBSD.ORG>,
	susumu@wakabaya.net, taku@cent.saitama-u.ac.jp
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
Message-ID: <20000816061412.A394@hand.dotat.at>
References: <Pine.A41.3.96.1000815112431.50074A-100000@cortez.sss.rpi.edu> <Pine.A41.3.96.1000815161127.123014A-100000@cortez.sss.rpi.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <Pine.A41.3.96.1000815161127.123014A-100000@cortez.sss.rpi.edu>
Organization: Covalent Technologies, Inc
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Garrett Rooney <rooneg@rpi.edu> wrote:
>On Tue, 15 Aug 2000, Garrett Rooney wrote:
>>
>> http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz
>> 
>> i tried this on a Dell Inspiron 3800, and at the moment all i get is a
>> really irritating beep that won't stop until i unload the maestro module.
>> i'll try and play with it more later, but at the moment my office mate is
>> threatening to kill me ;-)

I have a Dell Latitude CPx. At boot the audio controller is reported as:
pci0: <unknown card> (vendor=0x125d, dev=0x1998) at 8.0 irq 5
and when I load the Maestro driver patched with the Maestro-3 PCI ID I get
pcm0: <ESS Technology Maestro-3> port 0xd800-0xd8ff mem 0xfaffe000-0xfaffffff irq 5 at device 8.0 on pci0

I also get the problem of the high-pitched beep.

>after applying the mstr2_gpio and mstr2_spk patches, and adding the pci id
>for the Maestro 3E, the really annoying sound is gone, but playing audio
>doesn't seem to work.

I can't find those patches anywhere.

Tony.
-- 
en oeccget g mtcaa    f.a.n.finch
v spdlkishrhtewe y    dot@dotat.at
eatp o v eiti i d.    fanf@covalent.net


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16  6: 3: 6 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 2E58D37C2D3
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 06:02:57 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from vcmr-19.rcs.rpi.edu (vcmr-19.rcs.rpi.edu [128.113.113.12])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id JAA253646;
	Wed, 16 Aug 2000 09:02:13 -0400
Received: from localhost (rooneg@localhost)
	by vcmr-19.rcs.rpi.edu (8.8.5/8.8.6) with SMTP id JAA53760;
	Wed, 16 Aug 2000 09:02:34 -0400
X-Authentication-Warning: vcmr-19.rcs.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 09:02:34 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@vcmr-19.rcs.rpi.edu
To: Hellmuth Michaelis <hm@hcs.de>
Cc: freebsd-mobile@FreeBSD.ORG, susumu@wakabaya.net
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
In-Reply-To: <20000816061154.89019483B@hcswork.hcs.de>
Message-ID: <Pine.A41.3.96.1000816090219.56026A-100000@vcmr-19.rcs.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 16 Aug 2000, Hellmuth Michaelis wrote:

> > i tried this on a Dell Inspiron 3800, and at the moment all i get is a
> > really irritating beep that won't stop until i unload the maestro module.
> 
> I had this too, this beep was on a single channel (didn't remeber which one)
> and i just set the volume on this channel to 0.

i'll give that a shot...

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16  6:33:24 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from smtpproxy1.mitre.org (mbunix.mitre.org [129.83.20.100])
	by hub.freebsd.org (Postfix) with ESMTP id EB0A137B5A9
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 06:33:21 -0700 (PDT)
	(envelope-from jandrese@mitre.org)
Received: from avsrv1.mitre.org (avsrv1.mitre.org [129.83.20.58])
	by smtpproxy1.mitre.org (8.9.3/8.9.3) with ESMTP id JAA25040
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 09:33:19 -0400 (EDT)
Received: from mailsrv2.mitre.org (mailsrv2.mitre.org [129.83.221.17])
	by smtpsrv1.mitre.org (8.9.3/8.9.3) with ESMTP id JAA13825
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 09:30:54 -0400 (EDT)
Received: from mitre.org ([128.29.145.140]) by
          mailsrv2.mitre.org (Netscape Messaging Server 4.1) with ESMTP id
          FZE0BH00.DXY; Wed, 16 Aug 2000 09:33:17 -0400 
Message-ID: <399A98B4.2012001A@mitre.org>
Date: Wed, 16 Aug 2000 09:35:48 -0400
From: "Andresen,Jason R." <jandrese@mitre.org>
Organization: The MITRE Corporation
X-Mailer: Mozilla 4.73 [en]C-20000509M  (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Xpresspt@aol.com
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: locked in safe mode
References: <2f.9471dd6.26cb5aaa@aol.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Xpresspt@aol.com wrote:
> 
> don't have any idea how to get help......cannot get system out of the
> start-up "safe mode".  Any suggestions?

Did you boot Win95 by accident. :P

Seriously, FreeBSD doesn't really have a "safe mode" (well, maybe single
user mode), what exactly do you mean?  Are you stuck at the command
prompt?

If so, did you configure X with XF86Config and type startx?

-- 
   _  _    _  ___  ____  ___   ______________________________________
  / \/ \  | ||_ _||  _ \|___| | Jason Andresen -- jandrese@mitre.org
 / /\/\ \ | | | | | |/ /|_|_  | Views expressed may not reflect those 
/_/    \_\|_| |_| |_|\_\|___| | of the Mitre Corporation.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16  8:38:15 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 8D7B137BE80
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 08:38:07 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id LAA121418
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 11:37:58 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id LAA104508
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 11:38:19 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 11:38:19 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: freebsd-mobile@freebsd.org
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
In-Reply-To: <20000816060928.8623A483B@hcswork.hcs.de>
Message-ID: <Pine.A41.3.96.1000816113517.112104B-300000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: MULTIPART/MIXED; BOUNDARY="-2140049119-1077430144-966440299=:112104"
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

  This message is in MIME format.  The first part should be readable text,
  while the remaining parts are likely unreadable without MIME-aware tools.
  Send mail to mime@docserver.cac.washington.edu for more info.

---2140049119-1077430144-966440299=:112104
Content-Type: TEXT/PLAIN; charset=US-ASCII

> >From the keyboard of Garrett Rooney:
> 
> > after applying the mstr2_gpio and mstr2_spk patches
> 
> Where did you got them from ?

since several people have emailed me asking for these, and i can't find
them in the archives, here they are.

note that i don't have the card currently working, and i haven't had time
to play around any more, so i can't vouch for the usefulness of these
patches.

also, they have windows style line breaks, which i had to fix before patch
would apply them properly.  i don't currently have access to the fixed
versions.

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x

---2140049119-1077430144-966440299=:112104
Content-Type: TEXT/PLAIN; charset=US-ASCII; name="mstr2_gpio.patch"
Content-Transfer-Encoding: BASE64
Content-ID: <Pine.A41.3.96.1000816113819.112104C@cortez.sss.rpi.edu>
Content-Description: 
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---2140049119-1077430144-966440299=:112104
Content-Type: TEXT/PLAIN; charset=US-ASCII; name="mstr2_spk.patch2"
Content-Transfer-Encoding: BASE64
Content-ID: <Pine.A41.3.96.1000816113819.112104D@cortez.sss.rpi.edu>
Content-Description: 
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---2140049119-1077430144-966440299=:112104--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16  9:49:32 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from po3.wam.umd.edu (po3.wam.umd.edu [128.8.10.165])
	by hub.freebsd.org (Postfix) with ESMTP id 3D56F37C00C
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 09:49:28 -0700 (PDT)
	(envelope-from culverk@wam.umd.edu)
Received: from rac5.wam.umd.edu (rac5.wam.umd.edu [128.8.10.145])
	by po3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id MAA01071
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 12:49:13 -0400 (EDT)
Received: from rac5.wam.umd.edu (localhost [127.0.0.1])
	by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id MAA07584
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 12:49:23 -0400 (EDT)
Received: from localhost (culverk@localhost)
	by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id MAA07580
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 12:49:22 -0400 (EDT)
X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs
Date: Wed, 16 Aug 2000 12:49:22 -0400 (EDT)
From: Kenneth Wayne Culver <culverk@wam.umd.edu>
To: freebsd-mobile@freebsd.org
Subject: maestro 3i?
Message-ID: <Pine.GSO.4.21.0008161247370.7478-100000@rac5.wam.umd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I just bought a new dell laptop, and I noticed that while there are
drivers for the ess maestro 1/2 ... there isn't any info on the maestro 3
cards. My new dell has a maestro 3 and I was wondering if anyone had
gotten this to work somehow... I think I might be able to make it work in
a "sound blaster compat" mode or something... but I doubt it... I may also
be able to write a driver for it assuming I can find docs on this
card. Anyone have any ideas?

Ken



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 10:36: 6 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from zmail6.easynet.fr (email.easynet.fr [195.114.64.207])
	by hub.freebsd.org (Postfix) with SMTP id BCBC337C2E8
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 10:35:55 -0700 (PDT)
	(envelope-from christophe.yayon@easynet.fr)
Received: (qmail 64377 invoked from network); 16 Aug 2000 17:35:50 -0000
Received: from mailgate1.easynet.fr (192.168.1.2)
  by mailserver.easynet.fr with QMQP; 16 Aug 2000 17:35:50 -0000
Received: from easypost.easynet.fr (HELO mailman.endymion.com) (195.114.64.194)
  by mrelay1.easynet.fr with SMTP; 16 Aug 2000 17:35:50 -0000
To: freebsd-mobile@FreeBSD.ORG
From: christophe.yayon@easynet.fr
Subject: problem apm with freebsd
Date: Wed, 16 Aug 100 19:35:50 +0000
X-Mailer: Endymion MailMan v2.0
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="MailMan_Boundary"
Message-Id: <20000816173555.BCBC337C2E8@hub.freebsd.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

This is a multi-part message in MIME format.

--MailMan_Boundary
Content-Type: text/plain

Hi all,


I am new to Freebsd-mobile mailing list and 
Freebsd on a notebook too...
I have just bought a Thinkpad 1499 (i1400 
series) and i am trying to configure apm on 
my kernel.
I have a little problem, in fact when i put 
line 'apm0 at nexus......' ( without 
disabled) and when i use this new kernel,
when i want to go to suspend, it is ok, but, 
immediately it is going to resume !
It is doing the same when i do a zzz or (Fn-
F4) on my keyboard ( a specifical 
shortcut ), and my notebook is  running on
battery.
What should i do to correct it ? Any options 
perhaps ?

Thanks in advance ...
christophe.yayon@easynet.fr
---------------------------------------------
Ce message a été envoyé avec EASYPOST,
gestion des mails par Easynet.
http://easypost.easynet.fr/

--MailMan_Boundary
Content-Type: application/octet-stream; name=""
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=""

L3RtcC9jZ2ktbGliLjI2MDYwLjE=

--MailMan_Boundary
Content-Type: application/octet-stream; name=""
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=""

L3RtcC9jZ2ktbGliLjI2MDYwLjI=

--MailMan_Boundary--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 10:58:24 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id B0C1037C100
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 10:58:21 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA31444;
	Wed, 16 Aug 2000 11:58:17 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA05805; Wed, 16 Aug 2000 11:57:31 -0600 (MDT)
Message-Id: <200008161757.LAA05805@harmony.village.org>
To: "Lorin Lund" <lorin_lund@yahoo.com>
Subject: Re: Linksys 10/100 Ethernet card 
Cc: freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Tue, 15 Aug 2000 09:17:03 MDT."
		<002101c006cb$e229eca0$0900fea9@lorins.ild.telecom.com> 
References: <002101c006cb$e229eca0$0900fea9@lorins.ild.telecom.com>  
Date: Wed, 16 Aug 2000 11:57:31 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <002101c006cb$e229eca0$0900fea9@lorins.ild.telecom.com> "Lorin Lund" writes:
: No card in database for ""("")

Is this a cardbus card?

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 11: 0:20 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id 6AB5D37C30D
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 11:00:09 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id MAA31455;
	Wed, 16 Aug 2000 12:00:05 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id LAA05819; Wed, 16 Aug 2000 11:59:18 -0600 (MDT)
Message-Id: <200008161759.LAA05819@harmony.village.org>
To: Xpresspt@aol.com
Subject: Re: locked in safe mode 
Cc: freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Tue, 15 Aug 2000 22:47:06 EDT."
		<2f.9471dd6.26cb5aaa@aol.com> 
References: <2f.9471dd6.26cb5aaa@aol.com>  
Date: Wed, 16 Aug 2000 11:59:18 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <2f.9471dd6.26cb5aaa@aol.com> Xpresspt@aol.com writes:
: don't have any idea how to get help......cannot get system out of the 
: start-up "safe mode".  Any suggestions?

FreeBSD doesn't have a startup save mode.

If you are talking about single user mode, then you'll want to run
fsck in many cases.  If fsck complains about a specific file system,
then you'll need to run that.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 12:40:23 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 8C09E37B7B5
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 12:40:15 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id PAA234364;
	Wed, 16 Aug 2000 15:40:14 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id PAA17034;
	Wed, 16 Aug 2000 15:40:35 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 15:40:35 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.GSO.4.21.0008161247370.7478-100000@rac5.wam.umd.edu>
Message-ID: <Pine.A41.3.96.1000816153839.57698A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 16 Aug 2000, Kenneth Wayne Culver wrote:

> I just bought a new dell laptop, and I noticed that while there are
> drivers for the ess maestro 1/2 ... there isn't any info on the maestro 3
> cards. My new dell has a maestro 3 and I was wondering if anyone had
> gotten this to work somehow... I think I might be able to make it work in
> a "sound blaster compat" mode or something... but I doubt it... I may also
> be able to write a driver for it assuming I can find docs on this
> card. Anyone have any ideas?

if it's the same one as in the inspiron 3800, you may be in luck soon...

the driver for the maestro 1/2 almost works...  (almost meaning that
depending on what combination of patches i try, i can either get an
annoying beep that won't go away or no sound at all)  you just have to add
the pci id to the driver.

check the archives for the past week or so, and you can find a bunch of
messages about it.

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 12:46:57 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166])
	by hub.freebsd.org (Postfix) with ESMTP id 8AAD137B570
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 12:46:49 -0700 (PDT)
	(envelope-from culverk@wam.umd.edu)
Received: from rac5.wam.umd.edu (rac5.wam.umd.edu [128.8.10.145])
	by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA12085;
	Wed, 16 Aug 2000 15:46:47 -0400 (EDT)
Received: from rac5.wam.umd.edu (localhost [127.0.0.1])
	by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id PAA20270;
	Wed, 16 Aug 2000 15:46:47 -0400 (EDT)
Received: from localhost (culverk@localhost)
	by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA20266;
	Wed, 16 Aug 2000 15:46:46 -0400 (EDT)
X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs
Date: Wed, 16 Aug 2000 15:46:46 -0400 (EDT)
From: Kenneth Wayne Culver <culverk@wam.umd.edu>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.A41.3.96.1000816153839.57698A-100000@cortez.sss.rpi.edu>
Message-ID: <Pine.GSO.4.21.0008161545450.7478-100000@rac5.wam.umd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> if it's the same one as in the inspiron 3800, you may be in luck soon...

Yah, that's the one.. :-) 
> 
> the driver for the maestro 1/2 almost works...  (almost meaning that
> depending on what combination of patches i try, i can either get an
> annoying beep that won't go away or no sound at all)  you just have to add
> the pci id to the driver.
> 
> check the archives for the past week or so, and you can find a bunch of
> messages about it.
> 
> -garrett
> 
OK, good, I hope someone fixes it soon too then, all I was gonna do is add
the pci id to the driver and see if it'd work.. :-) Anyway, I wonder just
HOW different this card is ...



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 12:50:20 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id EA58C37B5D2
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 12:50:14 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id PAA403428;
	Wed, 16 Aug 2000 15:50:13 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id PAA14456;
	Wed, 16 Aug 2000 15:50:35 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 15:50:35 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.GSO.4.21.0008161545450.7478-100000@rac5.wam.umd.edu>
Message-ID: <Pine.A41.3.96.1000816154735.23280A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 16 Aug 2000, Kenneth Wayne Culver wrote:

> OK, good, I hope someone fixes it soon too then, all I was gonna do is add
> the pci id to the driver and see if it'd work.. :-) Anyway, I wonder just
> HOW different this card is ...

well, when i took the driver as it existed in the tarball and just added
the pci id (as suggested in an email on this list) all the card did was
beep annoyingly when you load the module.  i'm told, although i havent'
investigated this, that you can turn that channel down and get usable
sound.

when i applied the other patches that are floating around, it got rid of
the beep, but whenever i try to play something the interupt times out ;-(

when i get a chance i'm going to try and find some combination of changes
that works.

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 12:58:24 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166])
	by hub.freebsd.org (Postfix) with ESMTP id 64E4D37BE81
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 12:58:21 -0700 (PDT)
	(envelope-from culverk@wam.umd.edu)
Received: from rac5.wam.umd.edu (rac5.wam.umd.edu [128.8.10.145])
	by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA12853;
	Wed, 16 Aug 2000 15:58:18 -0400 (EDT)
Received: from rac5.wam.umd.edu (localhost [127.0.0.1])
	by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id PAA21395;
	Wed, 16 Aug 2000 15:58:17 -0400 (EDT)
Received: from localhost (culverk@localhost)
	by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA21391;
	Wed, 16 Aug 2000 15:58:17 -0400 (EDT)
X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs
Date: Wed, 16 Aug 2000 15:58:17 -0400 (EDT)
From: Kenneth Wayne Culver <culverk@wam.umd.edu>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.A41.3.96.1000816154735.23280A-100000@cortez.sss.rpi.edu>
Message-ID: <Pine.GSO.4.21.0008161557060.20372-100000@rac5.wam.umd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> well, when i took the driver as it existed in the tarball and just
> added the pci id (as suggested in an email on this list) all the card
> did was beep annoyingly when you load the module.  i'm told, although
> i havent' investigated this, that you can turn that channel down and
> get usable sound.
> 
> when i applied the other patches that are floating around, it got rid
> of the beep, but whenever i try to play something the interupt times
> out ;-(
> 
> when i get a chance i'm going to try and find some combination of
> changes that works.

Well, I should have my laptop by tomorrow.. and should have FreeBSD on it
when I get someplace that has ethernet access (most likely when school
starts at the end of the month). If at that point you havn't figured it
out, I'll hack around at it...

Ken



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 13: 6: 1 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 1EFA837B730
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 13:05:58 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id QAA401168;
	Wed, 16 Aug 2000 16:05:54 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id QAA110450;
	Wed, 16 Aug 2000 16:06:15 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 16:06:15 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.GSO.4.21.0008161557060.20372-100000@rac5.wam.umd.edu>
Message-ID: <Pine.A41.3.96.1000816160514.26352A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 16 Aug 2000, Kenneth Wayne Culver wrote:

> Well, I should have my laptop by tomorrow.. and should have FreeBSD on it
> when I get someplace that has ethernet access (most likely when school
> starts at the end of the month). If at that point you havn't figured it
> out, I'll hack around at it...

well, i gave it a shot, and all combinations of patches i tried have the
same interupt timout problem.  looks like this is going to take some work
;-(

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 13:15:41 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166])
	by hub.freebsd.org (Postfix) with ESMTP id 40B2B37B570
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 13:15:37 -0700 (PDT)
	(envelope-from culverk@wam.umd.edu)
Received: from rac5.wam.umd.edu (rac5.wam.umd.edu [128.8.10.145])
	by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA13953;
	Wed, 16 Aug 2000 16:15:33 -0400 (EDT)
Received: from rac5.wam.umd.edu (localhost [127.0.0.1])
	by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id QAA26392;
	Wed, 16 Aug 2000 16:15:33 -0400 (EDT)
Received: from localhost (culverk@localhost)
	by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA26388;
	Wed, 16 Aug 2000 16:15:32 -0400 (EDT)
X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs
Date: Wed, 16 Aug 2000 16:15:32 -0400 (EDT)
From: Kenneth Wayne Culver <culverk@wam.umd.edu>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.A41.3.96.1000816160514.26352A-100000@cortez.sss.rpi.edu>
Message-ID: <Pine.GSO.4.21.0008161615160.26043-100000@rac5.wam.umd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

> well, i gave it a shot, and all combinations of patches i tried have
> the same interupt timout problem.  looks like this is going to take
> some work ;-(
has the guy that wrote the driver tried anything?

Ken



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 13:18:38 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id F0B1537B511
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 13:18:33 -0700 (PDT)
	(envelope-from rooneg@rpi.edu)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id QAA118336;
	Wed, 16 Aug 2000 16:18:32 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id QAA73042;
	Wed, 16 Aug 2000 16:18:53 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Wed, 16 Aug 2000 16:18:53 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.GSO.4.21.0008161615160.26043-100000@rac5.wam.umd.edu>
Message-ID: <Pine.A41.3.96.1000816161807.48886A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 16 Aug 2000, Kenneth Wayne Culver wrote:

> > well, i gave it a shot, and all combinations of patches i tried have
> > the same interupt timout problem.  looks like this is going to take
> > some work ;-(
> has the guy that wrote the driver tried anything?

i have no idea...

i haven't actually had any contact with him.  all the info i've gotten has
been via people on this mailing list.

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 13:20:30 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166])
	by hub.freebsd.org (Postfix) with ESMTP id C41B537BD92
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 13:20:24 -0700 (PDT)
	(envelope-from culverk@wam.umd.edu)
Received: from rac5.wam.umd.edu (rac5.wam.umd.edu [128.8.10.145])
	by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA14270;
	Wed, 16 Aug 2000 16:20:22 -0400 (EDT)
Received: from rac5.wam.umd.edu (localhost [127.0.0.1])
	by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id QAA27192;
	Wed, 16 Aug 2000 16:20:20 -0400 (EDT)
Received: from localhost (culverk@localhost)
	by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id QAA27188;
	Wed, 16 Aug 2000 16:20:20 -0400 (EDT)
X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs
Date: Wed, 16 Aug 2000 16:20:20 -0400 (EDT)
From: Kenneth Wayne Culver <culverk@wam.umd.edu>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: maestro 3i?
In-Reply-To: <Pine.A41.3.96.1000816161807.48886A-100000@cortez.sss.rpi.edu>
Message-ID: <Pine.GSO.4.21.0008161619570.27152-100000@rac5.wam.umd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Oh ok.. hrmm... I see... Well, like I said, I can't work on it at all till
school starts probably.


=================================================================
| Kenneth Culver              | FreeBSD: The best NT upgrade    |
| Unix Systems Administrator  | ICQ #: 24767726                 |
| and student at The          | AIM: muythaibxr                 |
| The University of Maryland, | Website: (Under Construction)   |
| College Park.	              | http://www.wam.umd.edu/~culverk/|
=================================================================

On Wed, 16 Aug 2000, Garrett Rooney wrote:

> On Wed, 16 Aug 2000, Kenneth Wayne Culver wrote:
> 
> > > well, i gave it a shot, and all combinations of patches i tried have
> > > the same interupt timout problem.  looks like this is going to take
> > > some work ;-(
> > has the guy that wrote the driver tried anything?
> 
> i have no idea...
> 
> i haven't actually had any contact with him.  all the info i've gotten has
> been via people on this mailing list.
> 
> -garrett
> 
> x----------------------------------------------------------------------x
> | rooneg@rpi.edu                                        garrett rooney |
> | http://www.rpi.edu/~rooneg                                 unix geek |
> |----------------------------------------------------------------------|
> |  unrequited love is neat because it lasts so much longer - w. t. c.  |
> x----------------------------------------------------------------------x
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 16:33:22 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from smtp2.mail.yahoo.com (smtp2.mail.yahoo.com [128.11.68.32])
	by hub.freebsd.org (Postfix) with SMTP id B0B5437B9B9
	for <freebsd-mobile@freebsd.org>; Wed, 16 Aug 2000 16:33:14 -0700 (PDT)
	(envelope-from lorin_lund@yahoo.com)
Received: from red2-29.redrock.net (HELO lorins) (209.197.4.82)
  by smtp2.mail.yahoo.com with SMTP; 16 Aug 2000 23:30:14 -0000
X-Apparently-From: <lorin?lund@yahoo.com>
Message-ID: <000601c007db$2a9ae380$0900fea9@lorins.ild.telecom.com>
From: "Lorin Lund" <lorin_lund@yahoo.com>
To: "Warner Losh" <imp@village.org>
Cc: <freebsd-mobile@FreeBSD.ORG>
Subject: Re: Linksys 10/100 Ethernet card 
Date: Wed, 16 Aug 2000 17:38:57 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Yes
-----Original Message-----
From: Warner Losh <imp@village.org>
To: Lorin Lund <lorin_lund@yahoo.com>
Cc: freebsd-mobile@FreeBSD.ORG <freebsd-mobile@FreeBSD.ORG>
Date: Wednesday, August 16, 2000 11:59 AM
Subject: Re: Linksys 10/100 Ethernet card


>In message <002101c006cb$e229eca0$0900fea9@lorins.ild.telecom.com> "Lorin
Lund" writes:
>: No card in database for ""("")
>
>Is this a cardbus card?
>
>Warner


__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 17:13: 3 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id AF74B37B618
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 17:12:55 -0700 (PDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id SAA33215;
	Wed, 16 Aug 2000 18:12:52 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id SAA08360; Wed, 16 Aug 2000 18:12:04 -0600 (MDT)
Message-Id: <200008170012.SAA08360@harmony.village.org>
To: "Lorin Lund" <lorin_lund@yahoo.com>
Subject: Re: Linksys 10/100 Ethernet card 
Cc: freebsd-mobile@FreeBSD.ORG
In-reply-to: Your message of "Wed, 16 Aug 2000 17:38:57 MDT."
		<000601c007db$2a9ae380$0900fea9@lorins.ild.telecom.com> 
References: <000601c007db$2a9ae380$0900fea9@lorins.ild.telecom.com>  
Date: Wed, 16 Aug 2000 18:12:04 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <000601c007db$2a9ae380$0900fea9@lorins.ild.telecom.com> "Lorin Lund" writes:
: >Is this a cardbus card?
: Yes

You lose for now.  cardbus isn't suported right now.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Wed Aug 16 23:18:29 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from zmail6.easynet.fr (email.easynet.fr [195.114.64.207])
	by hub.freebsd.org (Postfix) with SMTP id C3C9437B753
	for <freebsd-mobile@FreeBSD.ORG>; Wed, 16 Aug 2000 23:18:25 -0700 (PDT)
	(envelope-from christophe.yayon@easynet.fr)
Received: (qmail 49872 invoked from network); 17 Aug 2000 06:18:22 -0000
Received: from mailgate2.easynet.fr (192.168.1.3)
  by mailserver.easynet.fr with QMQP; 17 Aug 2000 06:18:22 -0000
Received: from easypost.easynet.fr (HELO mailman.endymion.com) (195.114.64.194)
  by mrelay2.easynet.fr with SMTP; 17 Aug 2000 06:18:22 -0000
To: freebsd-mobile@FreeBSD.ORG
From: christophe.yayon@easynet.fr
Subject: problem apm with freebsd - next
Date: Thu, 17 Aug 100 08:18:22 +0000
X-Mailer: Endymion MailMan v2.0
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="MailMan_Boundary"
Message-Id: <20000817061825.C3C9437B753@hub.freebsd.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

This is a multi-part message in MIME format.

--MailMan_Boundary
Content-Type: text/plain

Hello,

In fact i have a pcmcia card in my notebook 
(ibm thinkpad 1499), it is a netgear 
FA410TX, but it doing extactly the same when 
i don't have plug it !
My rc.conf is ok :
apm_enable="YES"
---------------------------------------------
Ce message a été envoyé avec EASYPOST,
gestion des mails par Easynet.
http://easypost.easynet.fr/

--MailMan_Boundary
Content-Type: application/octet-stream; name=""
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=""

L3RtcC9jZ2ktbGliLjE3MjE5LjE=

--MailMan_Boundary
Content-Type: application/octet-stream; name=""
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=""

L3RtcC9jZ2ktbGliLjE3MjE5LjI=

--MailMan_Boundary--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17  9:53: 6 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from sabre.velocet.net (sabre.velocet.net [198.96.118.66])
	by hub.freebsd.org (Postfix) with ESMTP id BFEDC37B8AD
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 09:46:13 -0700 (PDT)
Received: from office.tor.velocet.net (trooper.velocet.net [216.126.82.226])
	by sabre.velocet.net (Postfix) with ESMTP id 17E58137FFD
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 12:46:09 -0400 (EDT)
Received: (from dgilbert@localhost)
	by office.tor.velocet.net (8.9.3/8.9.3) id MAA75154;
	Thu, 17 Aug 2000 12:46:08 -0400 (EDT)
	(envelope-from dgilbert)
From: David Gilbert <dgilbert@velocet.ca>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14748.5840.387840.745361@trooper.velocet.net>
Date: Thu, 17 Aug 2000 12:46:08 -0400 (EDT)
To: freebsd-mobile@freebsd.org
Subject: Maestro 2E in Fujitsu not configured.
X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs  Lucid
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I've got a Fujitsu E Series 6150.  With the driver posted at:

http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz

... I get:

pcm0: <ESS Technology Maestro-2E> irq 9 at device 13.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6

The following is the entire boot sequence from the laptop:

[1:1:301]root@canoe:~> dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #6: Thu Aug 17 12:39:18 EDT 2000
    root@canoe.velocet.ca:/usr/src/sys/compile/CANOE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (448.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 67043328 (65472K bytes)
avail memory = 62074880 (60620K bytes)
Preloaded elf kernel "kernel" at 0xc0324000.
Preloaded elf module "maestro.ko" at 0xc032409c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> irq 9 at device 13.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.0 on pci0
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.1 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x044a) at 16.0 irq 9
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <FUJITSU MHK2060AT> [12416/15/63] at ata0-master using UDMA33
acd0: CDROM <UJDA170> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0
ed1: address 00:e0:98:74:ec:28, type Linksys (16 bit) 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 10:37:41 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mag.ik.nu (mail.olm.nl [194.151.118.79])
	by hub.freebsd.org (Postfix) with ESMTP
	id E0D9537BCAE; Thu, 17 Aug 2000 10:36:57 -0700 (PDT)
Received: (from ralphm@localhost)
	by mag.ik.nu (8.9.3/8.9.3) id TAA80999;
	Thu, 17 Aug 2000 19:36:43 +0200 (CEST)
	(envelope-from ralphm)
Date: Thu, 17 Aug 2000 19:36:43 +0200
From: Ralph Meijer <ralphm@wat.moet.ik.nu>
To: freebsd-mobile@freebsd.org, freebsd-stable@freebsd.org
Cc: taku@cent.saitama-u.ac.jp
Subject: Followup: ESS Maestro-2E
Message-ID: <20000817193642.B80887@mag.ik.nu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0i
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Upon suggestion by Sean O'Connell triggered by a Maestro thread on -stable
I've tried the (beta) newpcm driver from
	http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/

It didn't compile on my 4.1-RELEASE box because of changes in
/sys/dev/sound/pcm/datatypes.h but following patch fixes that. I'm
not sure if it could be done easier, but this works.

Note that you have to crank the volume up quite a bit compared to the
OSS driver I used. Futhermore, there is no recording support (yet).

Greetz,

Ralphm (r@ik.nu)

--->8-- cut here --->8---
--- maestro.c.orig	Wed Aug 16 17:09:32 2000
+++ maestro.c	Thu Aug 17 19:03:58 2000
@@ -88,6 +88,7 @@
 	u_int			num;
 	u_int16_t		aputype;
 	u_int16_t		wcreg_tpl;
+	u_int32_t		fmt;
 };
 
 struct agg_info {
@@ -584,10 +585,16 @@
 static inline u_int
 calc_timer_freq(struct agg_chinfo *ch)
 {
+	unsigned ss;
+
 	pcm_channel *c = ch->channel;
 
-	return (c->speed * c->buffer.sample_size + c->blocksize - 1)
-	    / c->blocksize;
+	ss = 1;
+	ss <<= (ch->fmt & AFMT_STEREO)? 1 : 0;
+	ss <<= (ch->fmt & AFMT_16BIT)? 1 : 0;
+
+	return (c->speed * ss + c->buffer.blksz - 1)
+	    / c->buffer.blksz;
 }
 
 static void
@@ -679,6 +686,7 @@
 	}
 	ch->wcreg_tpl = wcreg_tpl;
 	ch->aputype = aputype;
+	ch->fmt = format;
 	return format;
 }
 

--->8-- cut here --->8---


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 11:10:16 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id 96CE237B698
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 17 Aug 2000 11:10:13 -0700 (PDT)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id OAA32236;
	Thu, 17 Aug 2000 14:10:10 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id OAA78440;
	Thu, 17 Aug 2000 14:10:31 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Thu, 17 Aug 2000 14:10:31 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: David Gilbert <dgilbert@velocet.ca>
Cc: freebsd-mobile@FreeBSD.ORG
Subject: Re: Maestro 2E in Fujitsu not configured.
In-Reply-To: <14748.5840.387840.745361@trooper.velocet.net>
Message-ID: <Pine.A41.3.96.1000817140934.78162A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Thu, 17 Aug 2000, David Gilbert wrote:

> I've got a Fujitsu E Series 6150.  With the driver posted at:
> 
> http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/releng4-20000725.tar.gz

i don't know if this will help, but there is a newer version of the driver
available from 

http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/newpcm-20000817.tar.gz

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 12:31:32 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from sabre.velocet.net (sabre.velocet.net [198.96.118.66])
	by hub.freebsd.org (Postfix) with ESMTP id 5E81B37B631
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 12:31:28 -0700 (PDT)
Received: from office.tor.velocet.net (trooper.velocet.net [216.126.82.226])
	by sabre.velocet.net (Postfix) with ESMTP id 691FC13804B
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 15:31:17 -0400 (EDT)
Received: (from dgilbert@localhost)
	by office.tor.velocet.net (8.9.3/8.9.3) id PAA93393;
	Thu, 17 Aug 2000 15:31:17 -0400 (EDT)
	(envelope-from dgilbert)
From: David Gilbert <dgilbert@velocet.ca>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14748.15748.488421.762650@trooper.velocet.net>
Date: Thu, 17 Aug 2000 15:31:16 -0400 (EDT)
To: freebsd-mobile@freebsd.org
Subject: Re: Maestro 2E in Fujitsu not configured.
X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs  Lucid
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

OK... I got the 20000817 code and then I got the patch posted recently 
to this list.  I now get:

pcm0: <ESS Technology Maestro-2E> port 0x1000-0x10ff irq 9 at device 13.0 on pci0
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6

As before, the whole boot is:

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #7: Thu Aug 17 13:50:43 EDT 2000
    root@canoe.velocet.ca:/usr/src/sys/compile/CANOE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (448.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 67043328 (65472K bytes)
avail memory = 62287872 (60828K bytes)
Preloaded elf kernel "kernel" at 0xc02f1000.
Preloaded elf module "maestro.ko" at 0xc02f109c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1820-0x182f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> port 0x1000-0x10ff irq 9 at device 13.0 on pci0
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: ac97 codec invalid or not present (id == 0)
device_probe_and_attach: pcm0 attach returned 6
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.0 on pci0
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 15.1 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x044a) at 16.0 irq 9
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <PNP0c02> at port 0x10-0x18,0x1f,0x22,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x50-0x52,0x72-0x77,0x80,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xbd,0x4d0-0x4d1,0xf800-0xf87f,0xf880-0xf8ff,0xfd60-0xfd67,0xff00-0xff3f,0xff80-0xff8f iomem 0xfff00000-0xffffffff on isa0
unknown1: <PNP0c01> at iomem 0-0x9ffff,0xe8000-0xfffff,0x100000-0x3ffffff on isa0
unknown2: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown3: <PNP0800> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown4: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown5: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown6: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown7: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown8: <PNP0c02> at iomem 0xcf800-0xcffff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: <Generic IRDA-compatible device> at port 0x2e8-0x2ef irq 3 on isa0
sio1: type 16550A
unknown: <PNP0400> can't assign resources
unknown9: <PNP0e03> at port 0x3e1-0x3e2 on isa0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <FUJITSU MHK2060AT> [12416/15/63] at ata0-master using UDMA33
acd0: CDROM <UJDA170> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
ed0 at port 0x240-0x25f irq 5 slot 0 on pccard0
ed0: address 00:e0:98:74:ec:28, type Linksys (16 bit) 

Dave.

-- 
============================================================================
|David Gilbert, Velocet Communications.       | Two things can only be     |
|Mail:       dgilbert@velocet.net             |  equal if and only if they |
|http://www.velocet.net/~dgilbert             |   are precisely opposite.  |
=========================================================GLO================


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 18:51:56 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.129.65])
	by hub.freebsd.org (Postfix) with ESMTP id B713C37BBA3
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 18:50:51 -0700 (PDT)
Received: from hand.dotat.at (lw-121-201.sj.shownets.net [209.119.121.201])
	by mx1.FreeBSD.org (Postfix) with ESMTP id A4A6A6E3210
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 14:28:12 -0700 (PDT)
Received: from fanf by hand.dotat.at with local (Exim 3.15 #3)
	id 13PWWA-0000pZ-00; Thu, 17 Aug 2000 20:44:02 +0000
Date: Thu, 17 Aug 2000 20:44:02 +0000
From: Tony Finch <dot@dotat.at>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@freebsd.org
Subject: Re: Sound card setup: ESS Maestro-2E on fujitsu lifebook e-seris
Message-ID: <20000817204402.A2894@hand.dotat.at>
References: <20000816060928.8623A483B@hcswork.hcs.de> <Pine.A41.3.96.1000816113517.112104B-300000@cortez.sss.rpi.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <Pine.A41.3.96.1000816113517.112104B-300000@cortez.sss.rpi.edu>
Organization: Covalent Technologies, Inc
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Garrett Rooney <rooneg@rpi.edu> wrote:
>
>>> after applying the mstr2_gpio and mstr2_spk patches
>> 
>> Where did you got them from ?
>
>since several people have emailed me asking for these, and i can't find
>them in the archives, here they are.

I've tried these patches in my Dell Latitude CP-x and it doesn't solve
the problem of the high-pitched beep.

Tony.
-- 
en oeccget g mtcaa    f.a.n.finch
v spdlkishrhtewe y    dot@dotat.at
eatp o v eiti i d.    fanf@covalent.net


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 18:56:10 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.129.65])
	by hub.freebsd.org (Postfix) with ESMTP id 6755F37BEE0
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 17 Aug 2000 18:51:37 -0700 (PDT)
Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43])
	by mx1.FreeBSD.org (Postfix) with ESMTP id B61146E4160
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 17 Aug 2000 16:27:58 -0700 (PDT)
Received: from v-ger.we.lc.ehu.es (lxpxav.lx.ehu.es [158.227.99.121])
	by polaris.we.lc.ehu.es (8.9.1/8.9.1) with ESMTP id BAA12880;
	Fri, 18 Aug 2000 01:24:27 +0200 (MET DST)
Received: from we.lc.ehu.es (localhost [127.0.0.1])
	by v-ger.we.lc.ehu.es (8.9.3/8.9.3) with ESMTP id BAA00489;
	Fri, 18 Aug 2000 01:20:07 +0200 (CEST)
	(envelope-from jose@we.lc.ehu.es)
Message-ID: <399C7327.218874DB@we.lc.ehu.es>
Date: Fri, 18 Aug 2000 01:20:07 +0200
From: "Jose M. Alcaide" <jose@we.lc.ehu.es>
Organization: Universidad del Pais Vasco - Dpto. de Electricidad y Electronica
X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.12 i386)
X-Accept-Language: es-ES, es, en-US, en
MIME-Version: 1.0
To: Garrett Rooney <rooneg@rpi.edu>
Cc: David Gilbert <dgilbert@velocet.ca>, freebsd-mobile@FreeBSD.ORG,
	taku@cent.saitama-u.ac.jp
Subject: Re: Maestro 2E in Fujitsu not configured.
References: <Pine.A41.3.96.1000817140934.78162A-100000@cortez.sss.rpi.edu>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Garrett Rooney wrote:
> 
> i don't know if this will help, but there is a newer version of the driver
> available from
> 
> http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/newpcm-20000817.tar.gz
> 

Unfortunately this newer version does not compile under 4.1-RELEASE:

# make
Warning: Object directory not changed from original /root/maestro-20000817
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
perl @/kern/makedevops.pl -h @/kern/bus_if.m
perl @/kern/makedevops.pl -h @/kern/device_if.m
perl @/kern/makedevops.pl -h @/pci/pci_if.m
perl @/kern/makedevops.pl -h @/isa/isa_if.m
cc -O -pipe -march=pentiumpro  -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I-  -I. -I@ -I@/../include -I/usr/include  -mpreferred-stack-boundary=2 -c maestro.c
maestro.c: In function `calc_timer_freq':
maestro.c:589: structure has no member named `sample_size'
maestro.c:589: structure has no member named `blocksize'
maestro.c:590: structure has no member named `blocksize'
maestro.c:591: warning: control reaches end of non-void function
*** Error code 1

-- JMA
****** Jose M. Alcaide  //  jose@we.lc.ehu.es  //  jmas@FreeBSD.org ******
** "Beware of Programmers who carry screwdrivers" --  Leonard Brandwein **


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 18:56:49 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.129.65])
	by hub.freebsd.org (Postfix) with ESMTP id DF1FE37BF55
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 17 Aug 2000 18:51:46 -0700 (PDT)
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by mx1.FreeBSD.org (Postfix) with ESMTP id E730B6E417B
	for <freebsd-mobile@FreeBSD.ORG>; Thu, 17 Aug 2000 16:32:36 -0700 (PDT)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id TAA375206;
	Thu, 17 Aug 2000 19:31:10 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id TAA120748;
	Thu, 17 Aug 2000 19:31:31 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Thu, 17 Aug 2000 19:31:31 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
To: "Jose M. Alcaide" <jose@we.lc.ehu.es>
Cc: David Gilbert <dgilbert@velocet.ca>, freebsd-mobile@FreeBSD.ORG,
	taku@cent.saitama-u.ac.jp
Subject: Re: Maestro 2E in Fujitsu not configured.
In-Reply-To: <399C7327.218874DB@we.lc.ehu.es>
Message-ID: <Pine.A41.3.96.1000817192952.22592A-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Fri, 18 Aug 2000, Jose M. Alcaide wrote:

> Unfortunately this newer version does not compile under 4.1-RELEASE:
> 
> # make
> Warning: Object directory not changed from original /root/maestro-20000817
> @ -> /usr/src/sys
> machine -> /usr/src/sys/i386/include
> perl @/kern/makedevops.pl -h @/kern/bus_if.m
> perl @/kern/makedevops.pl -h @/kern/device_if.m
> perl @/kern/makedevops.pl -h @/pci/pci_if.m
> perl @/kern/makedevops.pl -h @/isa/isa_if.m
> cc -O -pipe -march=pentiumpro  -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I-  -I. -I@ -I@/../include -I/usr/include  -mpreferred-stack-boundary=2 -c maestro.c
> maestro.c: In function `calc_timer_freq':
> maestro.c:589: structure has no member named `sample_size'
> maestro.c:589: structure has no member named `blocksize'
> maestro.c:590: structure has no member named `blocksize'
> maestro.c:591: warning: control reaches end of non-void function
> *** Error code 1

yeah, i jsut started playing around with it and ran into that...

i believe there was a patch posted to the mailing list earlier today that
took care of that, but i deleted the email by accident, and can't get the
the archives because www/freebsd.org appears to be down at the moment ;-(

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Thu Aug 17 20:30: 9 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mail.rpi.edu (mail.rpi.edu [128.113.100.7])
	by hub.freebsd.org (Postfix) with ESMTP id E8E8937B449
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 20:30:07 -0700 (PDT)
Received: from cortez.sss.rpi.edu (cortez.sss.rpi.edu [128.113.113.33])
	by mail.rpi.edu (8.9.3/8.9.3) with ESMTP id XAA399158
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 23:30:04 -0400
Received: from localhost (rooneg@localhost)
	by cortez.sss.rpi.edu (8.8.5/8.8.6) with SMTP id XAA25104
	for <freebsd-mobile@freebsd.org>; Thu, 17 Aug 2000 23:30:26 -0400
X-Authentication-Warning: cortez.sss.rpi.edu: rooneg owned process doing -bs
Date: Thu, 17 Aug 2000 23:30:25 -0400 (EDT)
From: Garrett Rooney <rooneg@rpi.edu>
X-Sender: rooneg@cortez.sss.rpi.edu
Reply-To: Garrett Rooney <rooneg@rpi.edu>
To: freebsd-mobile@freebsd.org
Subject: Re: Followup: ESS Maestro 2E
Message-ID: <Pine.A41.3.96.1000817232638.25936C-100000@cortez.sss.rpi.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

well, with the newer version of the code, patched to compile on 4.1, the
dell inspiron 3800 is back to making the annoying beep, but actually
trying to play a sound (with xmms for example) results in the interrupt
timing out.

here's the relevant info it's printing out when this occurs...

pcm0: <ESS Technology Maestro-3E> port 0xd800-0xd8ff mem
0xfaffe000-0xfaffffff irq 5 
at device 8.0 on pci0
pcm0: apu_setindex() timed out.
pcm0: wp_wrapu() timed out.
pcm0: apu_setindex() timed out.
pcm0: wp_wrapu() timed out.

<this goes on for a while>

<then a bunch of these>

pcm0: apu_setindex() timed out.
pcm0: apu_setindex() timed out.
pcm0: apu_setindex() timed out.
pcm0: apu_setindex() timed out.
pcm0: apu_setindex() timed out.
pcm0: apu_setindex() timed out.

<then i get annoyed and unload the module>

pcm0: wp_wrapu() timed out.
pcm0: apu_setindex() timed out.
pcm0: wp_wrapu() timed out.
pcm0: detached

at least it's back to making noise ;-)

-garrett

x----------------------------------------------------------------------x
| rooneg@rpi.edu                                        garrett rooney |
| http://www.rpi.edu/~rooneg                                 unix geek |
|----------------------------------------------------------------------|
|  unrequited love is neat because it lasts so much longer - w. t. c.  |
x----------------------------------------------------------------------x





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18  0:19:28 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from scribe.cc.purdue.edu (scribe.cc.purdue.edu [128.210.11.6])
	by hub.freebsd.org (Postfix) with ESMTP id 6D5B237B424
	for <mobile@FreeBSD.org>; Fri, 18 Aug 2000 00:19:24 -0700 (PDT)
Received: from [128.211.209.78] by scribe.cc.purdue.edu with ESMTP; Fri, 18 Aug 2000 02:19:22 -0500
Received: by argon.gryphonsoft.com (Postfix, from userid 1000)
	id 486A2195E; Fri, 18 Aug 2000 02:15:59 -0500 (EST)
Date: Fri, 18 Aug 2000 02:15:59 -0500
From: Will Andrews <andrews@technologist.com>
To: mobile@FreeBSD.org
Cc: Warner Losh <imp@village.org>
Message-Id: <20000818021559.A434@argon.gryphonsoft.com>
Mail-Followup-To: mobile@FreeBSD.org, Warner Losh <imp@village.org>
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="CdrF4e02JqNVZeln"
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
X-Operating-System: FreeBSD 5.0-CURRENT i386
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


--CdrF4e02JqNVZeln
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi,

I am getting problems with the latest 5.0-CURRENT and my ep card, a 3Com
3CCFE574BT.  The last time I updated (July 26, 2000), this card worked
fine.  Attached is a copy of my kernel config.

What happens is it boots up like normal, reports the normal ep address,
and then it says "ep0: eeprom failed to come ready" and displays a null
MAC address "00:00:00:00:00:00", then freezes.

Thoughts?

-- 
Will Andrews <andrewsw@purdue.edu> <will@FreeBSD.org>
GCS/E/S @d- s+:+ a--- C++ UB++++$ P+ L- E--- W+ N-- !o ?K w---
O- M+ V- PS+ PE++ Y+ PGP+>+++ t++ 5 X+ R+ tv+ b++ DI+++ D+ 
G++ e>++++ h! r- y?

--CdrF4e02JqNVZeln
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=ARGON

# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.260 2000/06/13 22:28:46 peter Exp $

machine		i386
cpu		I686_CPU
ident		ARGON
maxusers	50

hints		"ARGON.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options		IPSEC			#IP Security protocol
options		IPSEC_ESP		#IPSEC - heavy duty crypto
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	NFS			#Network Filesystem
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options		SOFTUPDATES		#ffs speedups
options		INCLUDE_CONFIG_FILE	#include configfile
options		RANDOMDEV		# /dev/random for crypto

device		isa
device		pci

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

device		atkbdc	1
device		atkbd
device		psm
device		vga
device		sc	1
device		npx
device		apm

device		pcm

device		iicbus
device		iicbb
device		ic
device		iic
device		smbus
device		smb
device		iicsmb

# PCCARD (PCMCIA) support
device		card
device		pcic
device		sio
device		ep

# Pseudo devices - the number indicates how many units to allocated.
device		loop		# Network loopback
device		ether		# Ethernet support
device		pty		# Pseudo-ttys (telnet etc)
device		gif	4	# IPv6 and IPv4 tunneling
device		faith	1	# IPv6-to-IPv4 relaying (translation)
device		bpf		# Berkeley packet filter
device		snp		# woops.

--CdrF4e02JqNVZeln
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="ARGON.hints"

hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
hint.npx.0.at="nexus"
hint.npx.0.port="0x0F0"
hint.npx.0.irq="13"
hint.apm.0.at="nexus"
hint.apm.0.flags="0x31"
hint.ep.0.at="isa"
hint.ep.0.port="0x300"
hint.ep.0.irq="10"
hint.pcic.0.at="card"
hint.pcic.1.at="card"
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
hint.ppc.0.at="isa"
hint.ppc.0.flags="0x40"
hint.ppc.0.irq="7"
hint.smb.0.at="smbus"
hint.iicsmb.0.at="iicbus"

--CdrF4e02JqNVZeln--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18  2: 5:11 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mag.ik.nu (mail.olm.nl [194.151.118.79])
	by hub.freebsd.org (Postfix) with ESMTP id C795037B423
	for <freebsd-mobile@freebsd.org>; Fri, 18 Aug 2000 02:05:07 -0700 (PDT)
Received: (from ralphm@localhost)
	by mag.ik.nu (8.9.3/8.9.3) id LAA87146;
	Fri, 18 Aug 2000 11:04:59 +0200 (CEST)
	(envelope-from ralphm)
Date: Fri, 18 Aug 2000 11:04:57 +0200
From: Ralph Meijer <ralphm@wat.moet.ik.nu>
To: Garrett Rooney <rooneg@rpi.edu>
Cc: freebsd-mobile@freebsd.org
Subject: Re: Followup: ESS Maestro 2E
Message-ID: <20000818110456.B86945@mag.ik.nu>
References: <Pine.A41.3.96.1000817232638.25936C-100000@cortez.sss.rpi.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 1.0i
In-Reply-To: <Pine.A41.3.96.1000817232638.25936C-100000@cortez.sss.rpi.edu>; from rooneg@rpi.edu on Thu, Aug 17, 2000 at 11:30:25PM -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Hmm, I'm not really sure wat the status is for the Maestro 3E,
but my HP OmniBook 4150 with a Maestro 2E card works without any
problems so far.

Greetz,

Ralphm

On Thu, Aug 17, 2000 at 11:30:25PM -0400, Garrett Rooney wrote:
> well, with the newer version of the code, patched to compile on 4.1, the
> dell inspiron 3800 is back to making the annoying beep, but actually
> trying to play a sound (with xmms for example) results in the interrupt
> timing out.
> 
> here's the relevant info it's printing out when this occurs...
> 
> pcm0: <ESS Technology Maestro-3E> port 0xd800-0xd8ff mem
> 0xfaffe000-0xfaffffff irq 5 
> at device 8.0 on pci0
> pcm0: apu_setindex() timed out.
> pcm0: wp_wrapu() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: wp_wrapu() timed out.
> 
> <this goes on for a while>
> 
> <then a bunch of these>
> 
> pcm0: apu_setindex() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: apu_setindex() timed out.
> 
> <then i get annoyed and unload the module>
> 
> pcm0: wp_wrapu() timed out.
> pcm0: apu_setindex() timed out.
> pcm0: wp_wrapu() timed out.
> pcm0: detached
> 
> at least it's back to making noise ;-)
> 
> -garrett
> 
> x----------------------------------------------------------------------x
> | rooneg@rpi.edu                                        garrett rooney |
> | http://www.rpi.edu/~rooneg                                 unix geek |
> |----------------------------------------------------------------------|
> |  unrequited love is neat because it lasts so much longer - w. t. c.  |
> x----------------------------------------------------------------------x
> 
> 
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-mobile" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18  2: 7:39 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from hcshh.hcs.de (hcshh.hcs.de [194.123.40.1])
	by hub.freebsd.org (Postfix) with ESMTP id 8CCB037B422
	for <freebsd-mobile@FreeBSD.ORG>; Fri, 18 Aug 2000 02:07:36 -0700 (PDT)
Received: from hcswork.hcs.de (hcswork.hcs.de [192.76.124.5])
	by hcshh.hcs.de (Postfix) with ESMTP
	id E403B5D3E; Fri, 18 Aug 2000 11:07:34 +0200 (CEST)
Received: by hcswork.hcs.de (Postfix, from userid 200)
	id 8F0FA483B; Fri, 18 Aug 2000 11:07:34 +0200 (METDST)
Subject: Maestro 3E, HP Omnibook 6000 and newpcm-20000817.tar.gz
In-Reply-To: <Pine.A41.3.96.1000817140934.78162A-100000@cortez.sss.rpi.edu> from Garrett Rooney at "Aug 17, 0 02:10:31 pm"
To: freebsd-mobile@FreeBSD.ORG
Date: Fri, 18 Aug 2000 11:07:34 +0200 (METDST)
Cc: taku@cent.saitama-u.ac.jp
Reply-To: hm@hcs.de
Organization: HCS Hanseatischer Computerservice GmbH
X-Mailer: ELM [version 2.4ME+ PL39 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Length: 1485      
Message-Id: <20000818090734.8F0FA483B@hcswork.hcs.de>
From: hm@hcs.de (Hellmuth Michaelis)
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

From the keyboard of Garrett Rooney:

> i don't know if this will help, but there is a newer version of the driver
> available from 
> 
> http://access.cent.saitama-u.ac.jp/~taku/freebsd/maestro/newpcm-20000817.tar.gz

Today i tried this one with the previously posted PCI ID patches for the
Maestro-3E and the patches to make it compile under 4.1-STABLE.

The output is as follows (long lines wrapped):

pcm0: <ESS Technology Maestro-3E> port 0x1800-0x18ff mem 0xf4002000-0xf4003fff
	irq 5 at device 13.0 on pci0
setmap (2b000, 1000), nseg=1, error=0
pcm0: Maestro DMA base: 0x2b000
pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel
	3D Enhancement
setmap (2d000, 1000), nseg=1, error=0
pcm0: pch[0].offset = 0x2000
setmap (2f000, 1000), nseg=1, error=0
pcm0: pch[1].offset = 0x4000
setmap (31000, 1000), nseg=1, error=0
pcm0: pch[2].offset = 0x6000
setmap (33000, 1000), nseg=1, error=0
pcm0: pch[3].offset = 0x8000

As soon as it it loaded it sounds the "annoying beep".

This beep is obviously coming from the "pcm" channel, i can switch it
off by executing "mixer pcm 0:0".

hellmuth
-- 
Hellmuth Michaelis                                    Tel   +49 40 55 97 47-70
HCS Hanseatischer Computerservice GmbH                Fax   +49 40 55 97 47-77
Oldesloer Strasse 97-99                               Mail  hm [at] hcs.de
D-22457 Hamburg                                       WWW   http://www.hcs.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18 11:24:32 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from sabre.velocet.net (sabre.velocet.net [198.96.118.66])
	by hub.freebsd.org (Postfix) with ESMTP
	id 0E47637B42C; Fri, 18 Aug 2000 11:24:16 -0700 (PDT)
Received: from office.tor.velocet.net (trooper.velocet.net [216.126.82.226])
	by sabre.velocet.net (Postfix) with ESMTP
	id 3678C137F5E; Fri, 18 Aug 2000 14:24:15 -0400 (EDT)
Received: (from dgilbert@localhost)
	by office.tor.velocet.net (8.9.3/8.9.3) id OAA17555;
	Fri, 18 Aug 2000 14:24:14 -0400 (EDT)
	(envelope-from dgilbert)
From: David Gilbert <dgilbert@velocet.ca>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14749.32590.386733.624002@trooper.velocet.net>
Date: Fri, 18 Aug 2000 14:24:14 -0400 (EDT)
To: freebsd-mobile@freebsd.org, freebsd-questions@freebsd.org
Subject: PCCard controler "sees" disk differently?
X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs  Lucid
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

I'm having some problems with a pccard controller for desktop
computers call "Power Chute" ... It's an ISA card that attaches
pccards to a desktop system.

When I insert the card on the desktop, I get:

Aug 18 17:02:40 news /kernel: pccard: card inserted, slot 1
Aug 18 13:02:46 news pccardd[282]: No card in database for "(null)"("(null)")

When I insert the same card on my laptop, I get:

Aug 18 14:10:52 canoe /kernel: pccard: card inserted, slot 1
Aug 18 14:11:07 canoe pccardd[46]: Card "SunDisk"("SDP") [5/3 0.6] [(null)] matched "SunDisk" ("/.*/") [(null)] [(null)] 
Aug 18 14:11:12 canoe /kernel: ata4 at port 0x260-0x26f irq 11 slot 1 on pccard1
Aug 18 14:11:12 canoe /kernel: ad8: 30MB <SanDisk SDCFB-32> [490/4/32] at ata4-master using BIOSPIO
Aug 18 14:11:12 canoe pccardd[46]: ata4: SunDisk (/.*/) inserted.

The PCCard controller on desktop (the Power Chute) probes as:

pcic2: <Cirrus Logic PD672X> at port 0x3e0-0x3e1 on isa0
pcic2: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic2
pccard1: <PC Card bus -- kludge version> on pcic2

And the PCCard controller on the laptop probes as:

pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0

On the laptop,

[1:6:306]root@canoe:~> pccardc dumpcis 1

Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
    000:  df 72 01 ff
        Common memory device information:
                Device number 1, type Function specific, WPS = ON
                Speed = 7.0 x 100 ns, Memory block size = reserved, 32 units
                Device number 2, type No device, WPS = OFF
                Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
    000:  03 d9 01 ff
        (MWAIT) (3V card)
Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2
    000:  df 01
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
    000:  45 00 01 04
        PCMCIA ID = 0x45, OEM ID = 0x401
Tuple #5, code = 0x15 (Version 1 info), length = 23
    000:  04 01 53 75 6e 44 69 73 6b 00 53 44 50 00 35 2f
    010:  33 20 30 2e 36 00 ff
        Version = 4.1, Manuf = [SunDisk], card vers = [SDP]
        Addit. info = [5/3 0.6]
Tuple #6, code = 0x0 (Null tuple), length = 3
    000:  14 08 00
Tuple #7, code = 0x21 (Functional ID), length = 2
    000:  04 01
        Fixed disk card - POST initialize
Tuple #8, code = 0x22 (Functional EXT), length = 2
    000:  01 01
Tuple #9, code = 0x22 (Functional EXT), length = 3
    000:  02 0c 0f
        Disk features: Silicon, Unique, Single
                Sleep, Standby, Idle, Low power, 
Tuple #10, code = 0x1a (Configuration map), length = 5
    000:  01 07 00 02 0f
        Reg len = 2, config register addr = 0x200, last config = 0x7
        Registers: XXXX---- 
Tuple #11, code = 0x1b (Configuration entry), length = 11
    000:  c0 c0 a1 27 55 4d 5d 75 08 00 21
        Config index = 0x0(default)
        Interface byte = 0xc0 (memory)  +RDY/-BSY active, wait signal supported
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 10 ms: 8 x 10mA
        Memory space length = 0x8
        Max twin cards = 1
        Misc attr: (Power down supported)
Tuple #12, code = 0x1b (Configuration entry), length = 6
    000:  00 01 21 b5 1e 4d
        Config index = 0x0
        Vcc pwr:
                Nominal operating supply voltage: 3 x 1V, ext = 0x1e
                Max current average over 10 ms: 4.5 x 10mA
Tuple #13, code = 0x1b (Configuration entry), length = 13
    000:  c1 41 99 27 55 4d 5d 75 64 f0 ff ff 21
        Config index = 0x1(default)
        Interface byte = 0x41 (I/O)  +RDY/-BSY active
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 10 ms: 8 x 10mA
        Card decodes 4 address lines, full 8/16 Bit I/O
                IRQ modes: Level, Pulse, Shared
                IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
        Max twin cards = 1
        Misc attr: (Power down supported)
Tuple #14, code = 0x1b (Configuration entry), length = 6
    000:  01 01 21 b5 1e 4d
        Config index = 0x1
        Vcc pwr:
                Nominal operating supply voltage: 3 x 1V, ext = 0x1e
                Max current average over 10 ms: 4.5 x 10mA
Tuple #15, code = 0x1b (Configuration entry), length = 18
    000:  c2 41 99 27 55 4d 5d 75 ea 61 f0 01 07 f6 03 01
    010:  ee 21
        Config index = 0x2(default)
        Interface byte = 0x41 (I/O)  +RDY/-BSY active
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 10 ms: 8 x 10mA
        Card decodes 10 address lines, full 8/16 Bit I/O
                I/O address # 1: block start = 0x1f0 block length = 0x8
                I/O address # 2: block start = 0x3f6 block length = 0x2
                IRQ modes: Level, Pulse, Shared
                IRQ level = 14
        Max twin cards = 1
        Misc attr: (Power down supported)
Tuple #16, code = 0x1b (Configuration entry), length = 6
    000:  02 01 21 b5 1e 4d
        Config index = 0x2
        Vcc pwr:
                Nominal operating supply voltage: 3 x 1V, ext = 0x1e
                Max current average over 10 ms: 4.5 x 10mA
Tuple #17, code = 0x1b (Configuration entry), length = 18
    000:  c3 41 99 27 55 4d 5d 75 ea 61 70 01 07 76 03 01
    010:  ee 21
        Config index = 0x3(default)
        Interface byte = 0x41 (I/O)  +RDY/-BSY active
        Vcc pwr:
                Nominal operating supply voltage: 5 x 1V
                Minimum operating supply voltage: 4.5 x 1V
                Maximum operating supply voltage: 5.5 x 1V
                Max current average over 10 ms: 8 x 10mA
        Card decodes 10 address lines, full 8/16 Bit I/O
                I/O address # 1: block start = 0x170 block length = 0x8
                I/O address # 2: block start = 0x376 block length = 0x2
                IRQ modes: Level, Pulse, Shared
                IRQ level = 14
        Max twin cards = 1
        Misc attr: (Power down supported)
Tuple #18, code = 0x1b (Configuration entry), length = 6
    000:  03 01 21 b5 1e 4d
        Config index = 0x3
        Vcc pwr:
                Nominal operating supply voltage: 3 x 1V, ext = 0x1e
                Max current average over 10 ms: 4.5 x 10mA
Tuple #19, code = 0x1b (Configuration entry), length = 4
    000:  07 00 28 d3
        Config index = 0x7
Tuple #20, code = 0x14 (No link), length = 0
Tuple #21, code = 0xff (Terminator), length = 0

If I do this on the desktop:

[1:8:308]root@news:~> pccardc dumpcis 0 

Code 224 not found
Code 224 not found
code Unknown ignored
Code 131 not found
Code 131 not found
code Unknown ignored
Code 118 not found
Code 118 not found
code Unknown ignored
Code 45 not found
Code 45 not found
code Unknown ignored
Code 192 not found
Code 192 not found
code Unknown ignored
Code 196 not found
Code 196 not found
code Unknown ignored
Code 94 not found
Code 94 not found
code Unknown ignored
Code 246 not found
Code 246 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x0 (Null tuple), length = 208
    000:  46 8a ff e4 8d 01 24 ee 5f c3 c8 00 56 76 8e 08
    010:  80 3e 0f b6 8b 04 47 89 fe 8a 08 e8 88 fb 07 49
    020:  c8 01 e0 46 8b fe c2 ec 46 26 7c 19 0f 46 08 fd
    030:  56 42 0c eb 8a fc d0 46 8b fe ec df 46 8a fd e4
    040:  56 83 30 4c 8a fb e9 b0 d2 88 fc 56 83 31 88 fd
    050:  80 3f 73 8a fc 46 8b fe ec 20 10 8a fc d0 46 8b
    060:  fe ec df 46 8a fd e4 56 83 31 8a fb e4 56 42 5e
    070:  c3 c8 00 56 76 8b 04 44 04 0f 48 8a 06 ff de 5e
    080:  f6 30 0f 8a f6 30 0f 82 8a 30 7f 46 3c 0f 46 3c
    090:  0f 40 8a 30 d0 07 d8 c0 c3 03 46 80 06 fa 75 fe
    0a0:  ff 7e 42 04 46 09 7e 43 07 46 0a 0b 80 fa 75 c6
    0b0:  ff 8b 83 0d a8 75 8b 83 1f a8 0f 29 80 ff 0f 21
    0c0:  c6 ff 8b fc 67 f7 46 5e c3 80 30 80 30 8a 30 7f
Tuple #2, code = 0x13 (Link target), length = 11
    000:  5e 80 30 80 30 8b fc 47 24 88 fa
Tuple #3, code = 0x13 (Link target), length = 130
    000:  00 1c 87 00 47 08 1b 47 8b 24 8a 02 02 02 04 88
    010:  ff c1 e9 00 8a 30 d0 07 d8 c0 c3 03 46 80 06 fa
    020:  75 fe ff 7e 13 07 46 0a 0b 80 fa 75 c6 ff 8b 83
    030:  0d a8 75 8b 83 1f a8 74 80 ff 73 c6 ff 8a ff c9
    040:  8a 06 ff de 47 02 37 47 24 c0 04 e4 c0 db 74 48
    050:  05 03 7e c6 ff 8a ff c9 c6 ff 8a ff c9 c6 ff 8a
    060:  ff c9 8a 20 c8 70 e8 8a 02 02 02 04 88 ff c1 74
    070:  fe ff 46 5e c3 55 ec 8b 04 00 46 50 e8 00 c4 6a
    080:  56 52
Tuple #4, code = 0x0 (Null tuple), length = 4
    000:  44 04 75 66
Tuple #5, code = 0x0 (Null tuple), length = 86
    000:  e4 83 06 c9 55 ec 8b 04 46 8b 04 e4 56 2a 03 83
    010:  20 f7 0e 00 15 c4 04 8f 0d c0 56 2a 03 83 70 5e
    020:  c3 55 ec 8b 04 46 8b 04 e4 d1 c2 ee 44 04 74 f6
    030:  06 75 33 8b 83 05 5e c3 c8 00 57 9c 58 46 c4 04
    040:  8b 8b 04 80 04 0f ec 26 47 00 94 00 88 fe e8 f9
    050:  c4 c4 04 f7 06 00
Tuple #6, code = 0x0 (Null tuple), length = 69
    000:  01 27 45 04 74 8d 5e 0c 2a eb 8d 60 0c 2a ee 41
    010:  8d 67 33 8d 68 8d 90 ec 46 b8 00 b8 00 94 00 06
    020:  8d a0 50 b2 83 06 c0 94 00 8d 90 ee 80 8d 9a ee
    030:  66 8a fa ff e3 8e 06 5e 66 ff 08 84 00 e8 fa c4
    040:  fe fa 7e 07 d9
Tuple #7, code = 0x0 (Null tuple), length = 148
    000:  00 8a 0d e1 08 c8 07 45 04 74 8d 5e 0c 2a eb 8d
    010:  9b ee 46 2a 8d 90 ee 46 24 50 e8 f8 c4 eb 26 7f
    020:  04 14 26 47 26 57 80 80 cc 66 89 04 46 50 5e c9
    030:  c8 00 57 9c 58 46 8b 04 77 8d 87 ec 46 88 ec e8
    040:  f8 c4 8d 90 ec 46 b8 00 88 ee 46 2a 8b 8b 03 81
    050:  b0 ec 43 fe ee 7e 04 e4 46 8d 90 ee 46 50 76 e8
    060:  f8 c4 ff 04 b0 83 02 0f 46 0a 75 8b f6 9d 46 5e
    070:  c9 f6 f4 74 80 f4 8a f4 ff 04 26 83 04 76 e8 f8
    080:  c4 88 fa 0f 46 0a 0f 48 f6 fa 0f ef ff 04 b6 8b
    090:  04 c4 8b 0c
Tuple #8, code = 0x0 (Null tuple), length = 117
    000:  f7 0e 00 84 00 54 ec 46 a8 0f b6 25 00 b8 00 94
    010:  00 8a f4 53 c6 83 04 5e 66 8b 04 8b 06 e4 80 01
    020:  26 47 c4 fc f7 26 ff 10 26 47 80 04 cc 66 89 04
    030:  5e 2a 26 47 2b 3d 00 22 0c c0 1c 04 18 0c 14 26
    040:  47 26 57 80 04 cc 66 89 04 4e 40 44 8d 9d ec 46
    050:  0a 75 f7 0e 80 05 01 eb b8 00 94 00 c8 2a 85 0f
    060:  60 e9 ff 8a f2 e4 8a f4 53 1c 83 04 4e 80 46 0d
    070:  3f 5e f7 0e 00
Tuple #9, code = 0x5 (Configuration entry for CardBus), length = 148
    000:  00 c6 f2 f6 fa 74 8d 0c 88 f0 80 04 46 3b 56 2a
    010:  03 ec c0 07 4e 80 10 80 f8 f6 fa 0f 14 b8 00 94
    020:  00 80 fa 80 fa 75 56 ff fc ba 83 06 cd 80 fa 75
    030:  c4 fc 53 ff e8 e1 e7 80 fa 75 56 ff fc 22 eb 80
    040:  fa 75 56 ff fc 24 eb 80 fa 75 56 ff fc e6 eb 80
    050:  fa 75 66 76 ff 04 bb 80 fa 75 56 ff fc ba eb 80
    060:  fa 75 56 ff fc ca eb 80 fa 74 80 fa 74 80 fa 75
    070:  c4 fc f7 06 00 34 5e f6 0c 74 8d 0d 24 3c 1b 40
    080:  c1 02 5e 26 47 25 00 c9 31 04 31 06 5e 26 4f 08
    090:  54 ec fb ee
	Config index = 0x0
	Vcc pwr:
		Minimum operating supply voltage: 8 x 10V, ext = 0xfa, ext = 0x74
		Max current average over 1 second: 1.2 x 10mA, ext = 0xc
		Max current average over 10 ms: 1.2 x 10nA, ext = 0xf0, ext = 0x80, ext = 0x4
		Power down supply current: 4 x 100mA
		Reserved: 3.5 x 100uA
	Vpp pwr:
		Minimum operating supply voltage: 2.5 x 1mV
		Maximum operating supply voltage: 1 x 10mV
		Max current average over 1 second: 7 x 1mA, ext = 0xc0, ext = 0x7
		Power down supply current: 4.5 x 100mA
	Memory base: 7
	Misc attr: (Wait)
Tuple #10, code = 0x0 (Null tuple), length = 38
    000:  47 2a 3d 14 85 01 26 47 26 57 80 04 cc 66 89 04
    010:  f0 f6 fa 0f 86 8b 04 47 04 74 8d 0b a8 74 53 04
    020:  83 02 04 8d 92 e9
Tuple #11, code = 0x0 (Null tuple), length = 240
    000:  74 c4 fc 8b 26 23 89 26 5e 66 8b 04 e4 80 04 26
    010:  47 ff 04 6a eb f6 f0 74 66 76 53 50 83 06 b4 f6
    020:  f0 74 66 76 53 9e eb f6 f0 74 56 ff fc 10 eb f6
    030:  fa 74 c4 fc f7 06 00 34 5e f6 0c 74 8d 0d 24 3c
    040:  1b 40 c1 02 5e 26 47 25 00 c9 31 04 31 06 5e 26
    050:  4f 08 08 8d 92 ee 54 ec f7 ee c0 54 ee 80 8d 68
    060:  8b 04 47 01 2b 5e 26 47 ff 21 f6 4e 74 06 e8 02
    070:  c4 c4 fc f6 4e 74 06 e8 05 c4 f6 ec 74 8a f4 ed
    080:  04 ff 04 7c 83 04 46 24 50 76 e8 f4 c4 e9 fc c8
    090:  00 56 46 00 fa 89 fc 5e 8b 04 e8 f4 c4 24 88 fe
    0a0:  46 50 8a fe c9 55 ec 7e 00 07 ff 04 46 c9 c8 00
    0b0:  57 c4 04 8b 89 fe 74 26 47 24 88 fd f7 06 00 19
    0c0:  26 47 66 06 00 66 89 28 26 47 0e 00 b8 00 94 00
    0d0:  b8 00 94 00 b8 00 94 00 b8 00 94 00 c4 04 26 47
    0e0:  66 08 00 66 8d a0 50 04 83 06 5e 66 ff 10 84 00
2 slots found

Dave.

-- 
============================================================================
|David Gilbert, Velocet Communications.       | Two things can only be     |
|Mail:       dgilbert@velocet.net             |  equal if and only if they |
|http://www.velocet.net/~dgilbert             |   are precisely opposite.  |
=========================================================GLO================


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18 11:32:50 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from diskfarm.firehouse.net (rdu25-12-043.nc.rr.com [24.25.12.43])
	by hub.freebsd.org (Postfix) with ESMTP
	id DC7E137B423; Fri, 18 Aug 2000 11:32:46 -0700 (PDT)
Received: (from abc@localhost)
	by diskfarm.firehouse.net (8.9.3/8.9.3) id SAA14203;
	Fri, 18 Aug 2000 18:32:25 GMT
	(envelope-from abc)
Date: Fri, 18 Aug 2000 18:32:25 +0000
From: Alan Clegg <abc@bsdi.com>
To: David Gilbert <dgilbert@velocet.ca>
Cc: freebsd-mobile@freebsd.org, freebsd-questions@freebsd.org
Subject: Re: PCCard controler "sees" disk differently?
Message-ID: <20000818183225.I9971@diskfarm.firehouse.net>
Mail-Followup-To: Alan Clegg <abc@bsdi.com>,
	David Gilbert <dgilbert@velocet.ca>, freebsd-mobile@freebsd.org,
	freebsd-questions@freebsd.org
References: <14749.32590.386733.624002@trooper.velocet.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.4i
In-Reply-To: <14749.32590.386733.624002@trooper.velocet.net>; from dgilbert@velocet.ca on Fri, Aug 18, 2000 at 02:24:14PM -0400
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Out of the ether, David Gilbert spewed forth the following bitstream:
> I'm having some problems with a pccard controller for desktop
> computers call "Power Chute" ... It's an ISA card that attaches
> pccards to a desktop system.
> 
> When I insert the card on the desktop, I get:
> 
> Aug 18 17:02:40 news /kernel: pccard: card inserted, slot 1
> Aug 18 13:02:46 news pccardd[282]: No card in database for "(null)"("(null)")

Check the memory location that you have the power-chute configured for.

AlanC {saw this, got it working, wear the shirt to prove it}


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18 11:37: 0 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from prydn.tacni.net (207-55-167-42.dhc.net [207.55.167.42])
	by hub.freebsd.org (Postfix) with SMTP id C8A5E37B422
	for <freebsd-mobile@freebsd.org>; Fri, 18 Aug 2000 11:36:52 -0700 (PDT)
Received: (qmail 24184 invoked by uid 1001); 18 Aug 2000 18:29:19 -0000
Date: Fri, 18 Aug 2000 13:29:19 -0500
From: Erich Zigler <erichz@superhero.org>
To: freebsd-mobile@freebsd.org
Subject: Re: PCCard controler "sees" disk differently?
Message-ID: <20000818132919.A24152@superhero.org>
Mail-Followup-To: Erich Zigler <erichz@superhero.org>,
	freebsd-mobile@freebsd.org
References: <14749.32590.386733.624002@trooper.velocet.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <14749.32590.386733.624002@trooper.velocet.net>; from dgilbert@velocet.ca on Fri, Aug 18, 2000 at 02:24:14PM -0400
X-Eric-Conspiracy: There is no conspiracy.
X-Shane: Hi Shane!
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Fri, Aug 18, 2000 at 02:24:14PM -0400, David Gilbert wrote:

> When I insert the card on the desktop, I get:
> Aug 18 17:02:40 news /kernel: pccard: card inserted, slot 1
> Aug 18 13:02:46 news pccardd[282]: No card in database for "(null)"("(null)")

I'm having the exact same problem on an IBM ThinkPad 600E using one of those
Compact Flash -> PCMCIA adaptors. The Compact Flash card is a 16MB Simple
Technology. It's worked maybe 1/100 times. It's really odd.

-- 
Erich Zigler                                   Sr. System Administrator

Fine day to work off excess energy.  Steal something heavy.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18 11:59: 7 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from sabre.velocet.net (sabre.velocet.net [198.96.118.66])
	by hub.freebsd.org (Postfix) with ESMTP
	id 5623937B422; Fri, 18 Aug 2000 11:59:03 -0700 (PDT)
Received: from office.tor.velocet.net (trooper.velocet.net [216.126.82.226])
	by sabre.velocet.net (Postfix) with ESMTP
	id 47C02137F58; Fri, 18 Aug 2000 14:58:56 -0400 (EDT)
Received: (from dgilbert@localhost)
	by office.tor.velocet.net (8.9.3/8.9.3) id OAA20856;
	Fri, 18 Aug 2000 14:58:52 -0400 (EDT)
	(envelope-from dgilbert)
From: David Gilbert <dgilbert@velocet.ca>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <14749.34667.191420.870913@trooper.velocet.net>
Date: Fri, 18 Aug 2000 14:58:51 -0400 (EDT)
To: Alan Clegg <abc@bsdi.com>
Cc: David Gilbert <dgilbert@velocet.ca>, freebsd-mobile@freebsd.org,
	freebsd-questions@freebsd.org
Subject: Re: PCCard controler "sees" disk differently?
In-Reply-To: <20000818183225.I9971@diskfarm.firehouse.net>
References: <14749.32590.386733.624002@trooper.velocet.net>
	<20000818183225.I9971@diskfarm.firehouse.net>
X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs  Lucid
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

>>>>> "Alan" == Alan Clegg <abc@bsdi.com> writes:

Alan> Out of the ether, David Gilbert spewed forth the following
Alan> bitstream:
>> I'm having some problems with a pccard controller for desktop
>> computers call "Power Chute" ... It's an ISA card that attaches
>> pccards to a desktop system.
>> 
>> When I insert the card on the desktop, I get:
>> 
>> Aug 18 17:02:40 news /kernel: pccard: card inserted, slot 1 Aug 18
>> 13:02:46 news pccardd[282]: No card in database for
>> "(null)"("(null)")

Alan> Check the memory location that you have the power-chute
Alan> configured for.

Alan> AlanC {saw this, got it working, wear the shirt to prove it}

I don't see a straightforward way of setting the location of the
card.  The book shows two sets of jumpers ... one set the "pccard
drive number" and the other (not present on my card) set the boot rom
location.

The card number jumpers set it to card0.

How do I set or detect the location of this unit?

Dave.

-- 
============================================================================
|David Gilbert, Velocet Communications.       | Two things can only be     |
|Mail:       dgilbert@velocet.net             |  equal if and only if they |
|http://www.velocet.net/~dgilbert             |   are precisely opposite.  |
=========================================================GLO================


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Fri Aug 18 19:25:52 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from elvis.mu.org (elvis.mu.org [207.154.226.10])
	by hub.freebsd.org (Postfix) with ESMTP id 337DE37B422
	for <mobile@freebsd.org>; Fri, 18 Aug 2000 19:25:50 -0700 (PDT)
Received: by elvis.mu.org (Postfix, from userid 1001)
	id AE8492B273; Fri, 18 Aug 2000 21:25:44 -0500 (CDT)
Date: Fri, 18 Aug 2000 21:25:44 -0500 (CDT)
From: H.Paul Hammann <hpaul@hammann.com>
To: mobile@freebsd.org
Subject: USB for dummies
X-Mailer: VM 6.43 under 20.4 "Emerald" XEmacs  Lucid
Message-ID: <14749.61193.564281.80595@elvis.mu.org>
Mime-Version: 1.0 (generated by tm-edit 7.108)
Content-Type: text/plain; charset=US-ASCII
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


    I'm running FreeBSD 4.x-STABLE on an HP OmniBook 900 as of a week
or so ago.  Recently I tried to get the USB daemon running.  I'm
having some problems as I describe below.  If there's any
documentation I'm missing, please point me to it.  If anyone has an
idea what I can change to make this work, I would greatly appreciate
any helpful advice.  Thanks a bunch for any help.

   When I boot I get the following errors:

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
module_register: module usb/uhub already exists!
linker_file_sysinit "usb.ko" failed to register! 17
module_register: module uhub/uhub already exists!
linker_file_sysinit "usb.ko" failed to register! 17
module_register: module ohci/usb already exists!
linker_file_sysinit "usb.ko" failed to register! 17
module_register: module uhci/usb already exists!
linker_file_sysinit "usb.ko" failed to register! 17
module_register: module pci/uhci already exists!
linker_file_sysinit "usb.ko" failed to register! 17
module_register: module pci/ohci already exists!
linker_file_sysinit "usb.ko" failed to register! 17
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 10 at device 7.2
on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 10 at device 7.2
on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

   When I try to run usbd manually I get:

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
No USB host controllers found
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-


   I have the following options in my kernel config file:

device          uhci
device          ohci
device          usb   
device          ukbd
device          ums
options KBD_INSTALL_CDEV


   I have the following devices made:

crw-------  1 root  wheel     112,   0 Aug 18 16:16 /dev/kbd0
crw-------  1 root  wheel     112,   1 Aug 18 16:16 /dev/kbd1
crw-------  1 root  wheel     111,   0 Aug 18 16:18 /dev/ums0
crw-rw----  1 root  operator  108, 255 Jul 25 21:12 /dev/usb
crw-rw----  1 root  operator  108,   0 Aug 18 18:11 /dev/usb0



Regards, 

H. Paul Hammann
hpaul@hammann.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 10:36:15 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id 51D1937B423
	for <mobile@FreeBSD.ORG>; Sat, 19 Aug 2000 10:36:13 -0700 (PDT)
Received: from billy-club.village.org (billy-club.village.org [10.0.0.3])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id LAA46188;
	Sat, 19 Aug 2000 11:36:11 -0600 (MDT)
	(envelope-from imp@billy-club.village.org)
Received: from billy-club.village.org (localhost.village.org [127.0.0.1]) by billy-club.village.org (8.9.3/8.8.3) with ESMTP id LAA27827; Sat, 19 Aug 2000 11:36:26 -0600 (MDT)
Message-Id: <200008191736.LAA27827@billy-club.village.org>
To: Will Andrews <andrews@technologist.com>
Cc: mobile@FreeBSD.ORG
In-reply-to: Your message of "Fri, 18 Aug 2000 02:15:59 CDT."
		<20000818021559.A434@argon.gryphonsoft.com> 
References: <20000818021559.A434@argon.gryphonsoft.com>  
Date: Sat, 19 Aug 2000 11:36:26 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <20000818021559.A434@argon.gryphonsoft.com> Will Andrews writes:
: I am getting problems with the latest 5.0-CURRENT and my ep card, a 3Com
: 3CCFE574BT.  The last time I updated (July 26, 2000), this card worked
: fine.  Attached is a copy of my kernel config.
: 
: What happens is it boots up like normal, reports the normal ep address,
: and then it says "ep0: eeprom failed to come ready" and displays a null
: MAC address "00:00:00:00:00:00", then freezes.

What does boot verbose (boot -v) have to say?

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 14:48:46 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id C064837B422
	for <mobile@freebsd.org>; Sat, 19 Aug 2000 14:48:43 -0700 (PDT)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id PAA46896
	for <mobile@freebsd.org>; Sat, 19 Aug 2000 15:48:42 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id PAA29658 for <mobile@freebsd.org>; Sat, 19 Aug 2000 15:47:44 -0600 (MDT)
Message-Id: <200008192147.PAA29658@harmony.village.org>
To: mobile@freebsd.org
Subject: NEWCARD quick update
Date: Sat, 19 Aug 2000 15:47:44 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


OK.  I have the infrastructure issues in NEWCARD dealt with.  I'm not
probing (but failing) devices.  I'm about to embark on updating
drivers to the NEWCARD regeim in an OLDCARD compatible way.  I'll do
the sn driver first and commit those changes as an example.  The sn
driver may be a little unstable as a result.  It is likely the least
widely used drivers, which is why I picked it.  There are still some
userland interaction issues that need to be addressed, as well as a
possible kernel linker bug that needs fixing, but I've made some good
progerss in the last few days.

This is only on the 16-bit cards in what is basically i82365
compatibility mode on the cardbus bridges, but it is a start.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 21:47:12 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from lavender.sanpei.org (ppp157.dialup.st.keio.ac.jp [131.113.27.157])
	by hub.freebsd.org (Postfix) with ESMTP id 8EFC337B423
	for <mobile@FreeBSD.org>; Sat, 19 Aug 2000 21:47:04 -0700 (PDT)
Received: (from sanpei@localhost)
	by lavender.sanpei.org (8.11.0/3.7W) id e7K4jp402239;
	Sun, 20 Aug 2000 13:45:51 +0900 (JST)
Message-Id: <200008200445.e7K4jp402239@lavender.sanpei.org>
To: mobile@FreeBSD.org
Subject: [PCCARD,PATCH] IOC_GET_RESOURCE_RANGE patch
X-Mailer: Mew version 1.70 on Emacs 19.34.1 / Mule 2.3
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Date: Sun, 20 Aug 2000 13:45:50 +0900
From: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Hi.
mobile user

  In 4-stable and 5-current, /usr/sbin/pccardd did not know used
resource(io) range in kernel.  We need to write free resource range
to /etc/pccard.conf from /var/run/dmesg.boot information by hand.

  I created experimental IOC_GET_RESOURCE_RANGE(but rename
PIOCSRESOURCE) ioctl code in sys/pccard which was suggested by
Warner-san.  With below patch we could read free ioport/irq/memory
resources from userland programs.
====================
# ./pccard-kernel-resource 1 280 300 10
                           ~ ~~~ ~~~ ~~
                           |  |   |   size
                           |  |   max_addr
                           |   min_addr
                           SYS_RES_IOPORT
min 0x280
max 0x300
size 0x10
resource 0x290	<-- return from ioctl
		<-- 0x280 - 0x28f was used by xe0 driver

# ./pccard-kernel-resource 2 1 15 1
                           ~ ~ ~~ ~
                           | | |   (dummy)
                           | | max_irq
                           | min_irq
                           SYS_RES_IRQ
min 0x1
max 0x15
size 0x1
resource 0x9	<-- irq 9 is free
====================

  Next step: I will add some code /usr/sbin/pccardd.

  By the way, below code was quick-hack code, I want to any
suggestions to commit into 5-current.

Cheers.
---
MIHIRA, Sanpei Yoshiro
Yokohama, Japan.

--- sys/pccard/pccard.c.orig	Sat Jun 24 07:47:17 2000
+++ sys/pccard/pccard.c	Sun Aug 20 12:58:59 2000
@@ -460,7 +460,14 @@
 	struct slot *slt = pccard_slots[minor(dev)];
 	struct mem_desc *mp;
 	struct io_desc *ip;
+	struct pccard_resource *pr;
+	struct pccard_devinfo *devi;
+	struct resource *r;
+	device_t pccarddev;
+	device_t child;
 	int s, err;
+	int rid = 0;
+	int i;
 	int	pwval;
 
 	if (slt == 0 && cmd != PIOCRWMEM)
@@ -610,6 +617,54 @@
 		if (pccard_beep_select(*(int *)data)) {
 			return EINVAL;
 		}
+		break;
+	case PIOCSRESOURCE: /* sanpei */
+		pr = (struct pccard_resource *)data;
+		pr->resource_addr = ~0ul;
+		pccarddev = devclass_get_device(pccard_devclass, 0);
+		MALLOC(devi, struct pccard_devinfo *, sizeof(*devi), M_DEVBUF, M_WAITOK);
+		bzero(devi, sizeof(*devi));
+		strcpy(devi->name, "ed");
+		devi->running = 1;
+		devi->slt = slt;
+		resource_list_init(&devi->resources);
+		child = device_add_child(pccarddev, devi->name, 3);
+	        device_set_flags(child, 0x0);
+		device_set_ivars(child, devi);
+		switch(pr->type) {
+		case SYS_RES_IOPORT:
+		case SYS_RES_MEMORY:
+			for (i = pr->min; i + pr->size <= pr->max;
+				i++) {
+				err = bus_set_resource(child, pr->type, 0, i, pr->size);
+				if (!err) {
+					r = bus_alloc_resource(child, pr->type, &rid, 0ul, ~0ul, pr->size, RF_ACTIVE);
+					if (r) { 
+						pr->resource_addr = (u_long)rman_get_start(r);
+			                        bus_release_resource(child, pr->type, rid, r);
+						break;
+					}
+				}
+			}
+			break;
+		case SYS_RES_IRQ:
+			for (i = pr->min; i <= pr->max;
+				i++) {
+				err = bus_set_resource(child, SYS_RES_IRQ, 0, i, 1);
+				if (!err) {
+					r = bus_alloc_resource(child, SYS_RES_IRQ, &rid, 0ul, ~0ul, 1, RF_ACTIVE);
+					if (r) { 
+						pr->resource_addr = (u_long)rman_get_start(r);
+			                        bus_release_resource(child, SYS_RES_IRQ, rid, r);
+						break;
+					}
+				}
+			}
+			break;
+		default:
+			return EINVAL;
+		}
+		device_delete_child(pccarddev, child);
 		break;
 	}
 	return(0);
--- sys/pccard/cardinfo.h.orig	Sun Jan 16 15:44:44 2000
+++ sys/pccard/cardinfo.h	Sun Aug 20 11:59:38 2000
@@ -49,6 +49,7 @@
 #define PIOCSPOW	_IOW('P', 9, struct power) /* Set power structure */
 #define PIOCSVIR	_IOW('P', 10, int)	/* Virtual insert/remove */
 #define PIOCSBEEP	_IOW('P', 11, int)		/* Select Beep */
+#define PIOCSRESOURCE	_IOWR('P', 12, struct pccard_resource)	/* get resource info */
 /*
  *	Debug codes.
  */
@@ -135,6 +136,18 @@
 	int	vcc;
 	int	vpp;
 };
+
+/*
+ *	Th PC-Card resource IOC_GET_RESOURCE_RANGE
+ */
+struct pccard_resource {
+	int		type;
+	u_long		size;
+	u_long		min;
+	u_long		max;
+	u_long		resource_addr;
+};
+
 
 /*
  *	Other system limits

---------- userland program----------
begin 644 pccard-kernel-resource-20000820.tar.gz
M'XL(`"%:GSD``^U8;6_;1A+.5_-73)TFE0Q&HMXLQ(Z#TA)M$Y!$E:3B&FG@
M4N32VK-("ES*EGOH?[^9)65+?FD/AUR*HAS`YG)WYIEG7G:7]L+WO31X=\W2
MF,W?I4PDR]1G]5=?4Z"M=3L=H*?6;."31"N>Q0MT&^WN?J>C-5H`C7:CU7H%
MG:_*X@59BLQ+`5X)+UXP_K+>[8RQ^;<@]&UE\7S]A]XU"_F<?14?#4W;;[=?
MKG]+:Z_KW^XV]['^G?U.]Q5H7\7[G\@_O/ZOE=<[>0_XL"ZZ@I/P_4G*V+'3
M/P"1^O6E2&MBRN-ZKEL\_/L^46^@46LTH/'^_?MZHUG7FJ!U#CK-@TX7>+0`
M8[6`[Q%W;%NG1SO/-YWBV#WGI<6:KRA*C<?^?!DP^#`506V1)E>UZ/JC\E?G
M\.\L+^S_EXKP/_GXD_W?Z=*9G^__9K/;!&AJW7:GW/_?0NI["NQ!+UG<I?QJ
MED'%K](F[H`>!RF[A:%O>ZP&H,_G(#4$8#>P](8%-;0D8YL%7&0IGRXSGL3@
MQ0$L!0,>0]XU<@;/#B^]@S!)(Z'"+<]FD*3RF2PS0HF2@(?<]PA#!2]EL&!I
MQ+.,!8`[_88'.,AF7H:_&.+,Y\DMCZ_`3^*`DY$@%+*+6'9`XT;M$34!2;CF
MY"=XC$18?`PG\Y`KH7K3Y(:6BF00"$J<9-QG*FIP`7/$(Y@'MS*\;4[HU)][
M/&(IY0B:3XF@PXV,K(E@G,$2R?U_N$`>98$4)/XR8G'FK8M6QWHDN)Y"Y&4L
MY=Y</"1>%HR`-\.0P;5JX.)\[$6,N$CJ2ZPJP=P17Y@RZ@?DE0"+@R3%WL!5
MA(Z2C$$><R;6M-`S]A:$N)Q'*9(PNZ6Z%LT"8L%\:A4TY=1#*35)G+>+$`4O
M@G//3`<<Z\0]UVT#<(RWSR>S;_3A^`(7#=`G[IEEPZ^_Z@XN__`#Z*,^_ER`
M\?/8-AP'+)MPS.%X8*(5PMCZR#4-1P5SU!M,^N;H5(7CB0LCRX6!.31=5',M
M5:(_-2,PZP2&AMT[PQG]V!R8[H7T>F*Z(_)X@GQT&.NV:_8F`]V&\<0>6PYR
MQ1#ZIM,;Z.;0Z,O4FR/T"\8G8^2"<Z8/!IM!'1M(2#\>&#DD!M4W;:/G$O5B
ME&/T,"/(9:"",S9Z)@V,GPWDKML7*F8`>M;(,7Z:H!(N0E\?ZJ>&`Y7M#!#6
MXR1@NGL3VQ@2/PS;F1P[KNE.7`-.+:M/V07'L#^9/<,YA(%%^3Z!B6-(8GW=
MU:5[1,'DH`8%-7%,F29SY!JV/1F[IC6JPIEUCEE`ICI:]V4^K1'%G'>!8=D7
M!$WYD!E7X?S,P'F;4HCAN;9.B7%<V^RYFVKHTK5L&=Q#O#`R3@?FJ3'J&:1@
M$="YZ1A5K)'ID((IG6/AT>U$QDZ%06XX?-*8JJP@F">@]S^9Q+_0Q[([9M$B
M,GV]LR+[5/VZHM3W_LNOM$5RBT>1+S_2FH^_T?8/6OL/WV@%<'XIX!'ISYD7
M+Q<J3)=7[T*^DB<,6^&&HYU&:M,[<+U,+",.9XE(KKU;#S[,BM&/45;S1>V:
M\:3F^;5_+3[FU%_S,`Y8B$=8G"F"#B&?CC$\S_P97L>I+WCP^0L<*3N[8]TZ
M@,T(6GD$6K..'YP8@:8==-IPO4SYG1=Y%,;NH?(:CQH>`J:(CB!R4_A=?T'Z
MV=V"U68?-Z98FFY/A'Z<S;>G1!9@*(^GYGRZ/;>,\9P,'NG=B3HY%4^G>>(_
M=A1Y_HS'K'[_[86K&\M%A>D7CT/)2*%<1GB75;STRJ<[].JFJNQ0Z"0T>:CL
MR/P"[-'JYR^'RK\?-,)`!:Y"S&ZI(BK<>',>P!$T5!!SS.(1:`\`\L3_O-_^
MHL+>`J?Q6L!C'')>EVO6L!Z@QO0WEB:5M^L9!.6_L22LK">JU4,%R80@^<-W
M1]!!^CMK%N2;%K^3$[2"]5I5D-SN1'A7[`#>",!3&^B#+J.K1CK8S1/Q6?LB
MX87PO3BLR*D&<M]]$Z#&6UZE$/"&\6=0X57`K/@>7E2-`_1S7P*J'C)Q+IQ+
M='1I6F,\'-!P9YHR[_JPL&G^H8W]TQ.#UA\9#(TA'E^;-KAOO.4\(R.\`>,L
MK.QB)A)YOZ/%+_$N!8.`V3*-*PUZ^?U1Y$T9^8HBO_<;\9A4UY#X"MKJS0KA
M5'BDM`W6>@[,6VV!>:OGP*32-EC[&3`JXR8:O3\#5Z@IZW\KB$*?&E7%N\'N
M7_8-NFU4T*3?D-HJ6;"X4+$N[?ZY72WZ#%<_H&+>9[+-W@AT1ZIK%;EM*[1M
MQJ;5<S#YUL0F_+<//;UA+]6ALJ5;W=V,['[;W$=7P87J?8CKP:47!"D9YD6F
IO?%[^6=P*:644DHII9122BFEE%)**:644DHII92R+?\!66F'.``H```9
`
end


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 21:55:53 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from mass.osd.bsdi.com (mass.osd.bsdi.com [204.216.28.234])
	by hub.freebsd.org (Postfix) with ESMTP id 081A237B424
	for <mobile@FreeBSD.org>; Sat, 19 Aug 2000 21:55:52 -0700 (PDT)
Received: from mass.osd.bsdi.com (localhost [127.0.0.1])
	by mass.osd.bsdi.com (8.9.3/8.9.3) with ESMTP id WAA00577;
	Sat, 19 Aug 2000 22:08:17 -0700 (PDT)
	(envelope-from msmith@mass.osd.bsdi.com)
Message-Id: <200008200508.WAA00577@mass.osd.bsdi.com>
X-Mailer: exmh version 2.1.1 10/15/1999
To: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
Cc: mobile@FreeBSD.org
Subject: Re: [PCCARD,PATCH] IOC_GET_RESOURCE_RANGE patch 
In-reply-to: Your message of "Sun, 20 Aug 2000 13:45:50 +0900."
             <200008200445.e7K4jp402239@lavender.sanpei.org> 
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Sat, 19 Aug 2000 22:08:16 -0700
From: Mike Smith <msmith@freebsd.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

>   By the way, below code was quick-hack code, I want to any
> suggestions to commit into 5-current.

This should be done in the kernel, using the resource requirements from 
the CIS (very similar to the way that resources are allocated for ISA PnP 
cards).


-- 
... every activity meets with opposition, everyone who acts has his
rivals and unfortunately opponents also.  But not because people want
to be opponents, rather because the tasks and relationships force
people to take different points of view.  [Dr. Fritz Todt]




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 23:12:41 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP
	id 7DFA337B424; Sat, 19 Aug 2000 23:12:39 -0700 (PDT)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id AAA47715;
	Sun, 20 Aug 2000 00:12:38 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id AAA30704; Sun, 20 Aug 2000 00:11:39 -0600 (MDT)
Message-Id: <200008200611.AAA30704@harmony.village.org>
To: Mike Smith <msmith@FreeBSD.ORG>
Subject: Re: [PCCARD,PATCH] IOC_GET_RESOURCE_RANGE patch 
Cc: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, mobile@FreeBSD.ORG
In-reply-to: Your message of "Sat, 19 Aug 2000 22:08:16 PDT."
		<200008200508.WAA00577@mass.osd.bsdi.com> 
References: <200008200508.WAA00577@mass.osd.bsdi.com>  
Date: Sun, 20 Aug 2000 00:11:39 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <200008200508.WAA00577@mass.osd.bsdi.com> Mike Smith writes:
: >   By the way, below code was quick-hack code, I want to any
: > suggestions to commit into 5-current.
: 
: This should be done in the kernel, using the resource requirements from 
: the CIS (very similar to the way that resources are allocated for ISA PnP 
: cards).

That's the NEWCARD stuff.  OLDCARD patches are what mihira-san is
talking about, and that is FAR easier to patch the vector he's headed
down rather than moving it all into the kernel.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message


From owner-freebsd-mobile  Sat Aug 19 23:24:51 2000
Delivered-To: freebsd-mobile@freebsd.org
Received: from rover.village.org (rover.village.org [204.144.255.49])
	by hub.freebsd.org (Postfix) with ESMTP id AC18637B424
	for <mobile@FreeBSD.ORG>; Sat, 19 Aug 2000 23:24:47 -0700 (PDT)
Received: from harmony.village.org (harmony.village.org [10.0.0.6])
	by rover.village.org (8.9.3/8.9.3) with ESMTP id AAA47731;
	Sun, 20 Aug 2000 00:24:45 -0600 (MDT)
	(envelope-from imp@harmony.village.org)
Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id AAA30742; Sun, 20 Aug 2000 00:23:46 -0600 (MDT)
Message-Id: <200008200623.AAA30742@harmony.village.org>
To: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
Subject: Re: [PCCARD,PATCH] IOC_GET_RESOURCE_RANGE patch 
Cc: mobile@FreeBSD.ORG
In-reply-to: Your message of "Sun, 20 Aug 2000 13:45:50 +0900."
		<200008200445.e7K4jp402239@lavender.sanpei.org> 
References: <200008200445.e7K4jp402239@lavender.sanpei.org>  
Date: Sun, 20 Aug 2000 00:23:46 -0600
From: Warner Losh <imp@village.org>
Sender: owner-freebsd-mobile@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

In message <200008200445.e7K4jp402239@lavender.sanpei.org> MIHIRA Sanpei Yoshiro writes:
:   In 4-stable and 5-current, /usr/sbin/pccardd did not know used
: resource(io) range in kernel.  We need to write free resource range
: to /etc/pccard.conf from /var/run/dmesg.boot information by hand.

Not sure about using /var/run/dmesg.boot, since it won't return
information about drivers that are loaded after boot.  and plug and
play resources are now silently allocated, so that's not a good
solution.

:   I created experimental IOC_GET_RESOURCE_RANGE(but rename
: PIOCSRESOURCE) ioctl code in sys/pccard which was suggested by
: Warner-san.  With below patch we could read free ioport/irq/memory
: resources from userland programs.

Yes.  This looks like a good, low impact solution for the near term to 
provide for better error detection for the pccard users until NEWCARD
is stable.  We're likely stuck with OLDCARD for the 4.x branch, and
the number of problems where people just slap cards into the system
and expect them to work has risen.  The easier we make pccard stuff,
the more we need good error detection.  Now we have "xe0: no ports"
which isn't useful to most people.

: +		child = device_add_child(pccarddev, devi->name, 3);

However, I don't think that you need to add a child to the node tree
just to get this information.  It seems that you could get this same
information from it, since normally it doesn't consume any resources.
It would certainly clean up the code somewhat not having to do all of
this extra work and wouldn't conflict if there ever was a ed3 on the
system.

: +			for (i = pr->min; i + pr->size <= pr->max;
: +				i++) {
: +				err = bus_set_resource(child, pr->type, 0, i, pr->size);
: +				if (!err) {
: +					r = bus_alloc_resource(child, pr->type, &rid, 0ul, ~0ul, pr->size, RF_ACTIVE);
: +					if (r) { 
: +						pr->resource_addr = (u_long)rman_get_start(r);
: +			                        bus_release_resource(child, pr->type, rid, r);
: +						break;
: +					}
: +				}
: +			}

We might want to also look at bringing in the alignment patches that
were given in one of the mailing lists a while ago.  This would make
it possible to not have to do these loops here, but instead have them
moved up a level.  Lemme see if I can find them.  I'm in the middle of 
doing some newcard stuff right now, but could help you with this if
you were interested.

I think the add/delete of the child is worse than the aligment issues
(which could, I suppose, be worked around in userland, I didn't look
at those patches yet) and should be corrected before it is committed.

Warner


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message