From owner-freebsd-multimedia Sun Jan 23 10: 4:52 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from wop21.wop.wtb.tue.nl (wop21.wop.wtb.tue.nl [131.155.56.216]) by hub.freebsd.org (Postfix) with ESMTP id 542FE14D0C for ; Sun, 23 Jan 2000 10:04:50 -0800 (PST) (envelope-from karelj@wop21.wop.wtb.tue.nl) Received: (from karelj@localhost) by wop21.wop.wtb.tue.nl (8.9.3/8.9.3) id TAA12265 for freebsd-multimedia@freebsd.org; Sun, 23 Jan 2000 19:04:44 +0100 (CET) (envelope-from karelj) Date: Sun, 23 Jan 2000 19:04:44 +0100 From: "Karel J. Bosschaart" To: freebsd-multimedia@freebsd.org Subject: location of glx.conf? Message-ID: <20000123190444.A12242@wop21.wop.wtb.tue.nl> Reply-To: K.J.Bosschaart@wtb.tue.nl Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I guess I'm overlooking something, but I can't find out where to put the glx.conf file for hw-accelerated OpenGL. I tried /etc because XF86Config is located there as well but the glx module loads without reading it. Tried some other locations as well, but no success. Thanks, Karel. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sun Jan 23 12:52: 7 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from tusk.mountain-inter.net (tusk.mountain-inter.net [204.244.200.1]) by hub.freebsd.org (Postfix) with ESMTP id DF6A514CB7 for ; Sun, 23 Jan 2000 12:52:04 -0800 (PST) (envelope-from sreid@sea-to-sky.net) Received: from grok.localnet (unknown@analog28.sq.mntn.net [204.244.200.37]) by tusk.mountain-inter.net (8.9.3/8.9.3) with ESMTP id MAA24048; Sun, 23 Jan 2000 12:52:03 -0800 Received: by grok.localnet (Postfix, from userid 1000) id EDC9B212E07; Sun, 23 Jan 2000 12:52:28 -0800 (PST) Date: Sun, 23 Jan 2000 12:52:28 -0800 From: Steve Reid To: K.J.Bosschaart@wtb.tue.nl Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: location of glx.conf? Message-ID: <20000123125228.A423@grok.localnet> References: <20000123190444.A12242@wop21.wop.wtb.tue.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <20000123190444.A12242@wop21.wop.wtb.tue.nl>; from Karel J. Bosschaart on Sun, Jan 23, 2000 at 07:04:44PM +0100 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Jan 23, 2000 at 07:04:44PM +0100, Karel J. Bosschaart wrote: > I guess I'm overlooking something, but I can't find out where to put > the glx.conf file for hw-accelerated OpenGL. I tried /etc because > XF86Config is located there as well but the glx module loads without > reading it. Tried some other locations as well, but no success. When you run autogen.sh (which runs gnu configure) it'll say where the configuration file is expected. Usually /etc/X11. This has been changed around a few times as the project developed so I have my actual file as /etc/glx.conf, and have /etc/X11/glx.conf and /usr/X11R6/etc/X11/glx.conf as symlinks to glx.conf. Works for me. BTW, I'm assuming you're talking about Utah-GLX at http://utah-glx.sourceforge.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sun Jan 23 15: 4: 3 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from blaubaer.kn-bremen.de (blaubaer.kn-bremen.de [195.37.179.254]) by hub.freebsd.org (Postfix) with ESMTP id 553A41505D for ; Sun, 23 Jan 2000 15:03:59 -0800 (PST) (envelope-from nox@saturn.kn-bremen.de) Received: from saturn.kn-bremen.de (uucp@localhost) by blaubaer.kn-bremen.de (8.9.1/8.9.1) with UUCP id XAA21542; Sun, 23 Jan 2000 23:59:30 +0100 Received: (from nox@localhost) by saturn.kn-bremen.de (8.9.3/8.8.5) id AAA92313; Mon, 24 Jan 2000 00:02:19 +0100 (CET) Date: Mon, 24 Jan 2000 00:02:19 +0100 (CET) From: Juergen Lock Message-Id: <200001232302.AAA92313@saturn.kn-bremen.de> To: kris@hiwaay.net Subject: Re: MIDI, OPL3 X-Newsgroups: local.list.freebsd.multimedia In-Reply-To: Organization: home Cc: multimedia@FreeBSD.ORG Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In article you write: >What (other than effort) is barring OPL2/3 support and MPU support in >FreeBSD? (the new driver) Hmm i wonder why you got no followup on this one? Have a look here: http://www.freebsd.org/~tanimura/ Tho if you're on the RELENG_3 -stable branch then i guess you'd still have to stick with the old driver... Regards, -- Juergen Lock (remove dot foo from address to reply) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sun Jan 23 16: 0:31 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from dqc.org (gonzo.st [208.44.74.16]) by hub.freebsd.org (Postfix) with ESMTP id 871E114F55 for ; Sun, 23 Jan 2000 16:00:29 -0800 (PST) (envelope-from matt@dqc.org) Received: by dqc.org (Postfix, from userid 1005) id 4EFE2BB9E; Sun, 23 Jan 2000 16:00:28 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by dqc.org (Postfix) with ESMTP id 4D512ACC2 for ; Sun, 23 Jan 2000 16:00:28 -0800 (PST) Date: Sun, 23 Jan 2000 16:00:28 -0800 (PST) From: just matt To: freebsd-multimedia@FreeBSD.ORG Subject: Re: Problem with fxtv capture and mplex In-Reply-To: <200001222225.OAA35689@rah.star-gate.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Thanks for the link, that will help, but does anyonw know where I can get the ISO white papers for mpeg-1 systems? Thanks, - Matt On Sat, 22 Jan 2000, Amancio Hasty wrote: > The mpeg 2 docs are at: > > http://www.wotsit.org/ > > search mpeg > > The documents are in ms doc format. > > Enjoy > > -- > Amancio Hasty > hasty@rah.star-gate.com > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sun Jan 23 17: 3:13 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from rah.star-gate.com (216-200-29-190.snj0.flashcom.net [216.200.29.194]) by hub.freebsd.org (Postfix) with ESMTP id CA2D314A24 for ; Sun, 23 Jan 2000 17:03:11 -0800 (PST) (envelope-from hasty@rah.star-gate.com) Received: from rah.star-gate.com (localhost.star-gate.com [127.0.0.1]) by rah.star-gate.com (8.9.3/8.9.3) with ESMTP id RAA46984; Sun, 23 Jan 2000 17:02:35 -0800 (PST) (envelope-from hasty@rah.star-gate.com) Message-Id: <200001240102.RAA46984@rah.star-gate.com> X-Mailer: exmh version 2.0.2 2/24/98 To: just matt Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: Problem with fxtv capture and mplex In-reply-to: Your message of "Sun, 23 Jan 2000 16:00:28 PST." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 23 Jan 2000 17:02:35 -0800 From: Amancio Hasty Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi The mpeg 1 documents are not publicly available and cost about $400. -- Amancio Hasty hasty@rah.star-gate.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 4:34:57 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from gilgamesch.bik-gmbh.de (gilgamesch.bik-gmbh.de [194.233.237.194]) by hub.freebsd.org (Postfix) with ESMTP id DB4EE14BF2 for ; Mon, 24 Jan 2000 04:34:53 -0800 (PST) (envelope-from cracauer@gilgamesch.bik-gmbh.de) Received: (from cracauer@localhost) by gilgamesch.bik-gmbh.de (8.9.3/8.7.3) id NAA84956; Mon, 24 Jan 2000 13:34:34 +0100 (MET) Date: Mon, 24 Jan 2000 13:34:34 +0100 From: Martin Cracauer To: Steve Hocking Cc: multimedia@FreeBSD.ORG Subject: Re: NVidia & VA closed source OpenGL Message-ID: <20000124133434.A84307@cons.org> References: <200001201619.KAA24706@prg01.hstn.tensor.pgs.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <200001201619.KAA24706@prg01.hstn.tensor.pgs.com>; from Steve Hocking on Thu, Jan 20, 2000 at 10:19:51AM -0600 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In <200001201619.KAA24706@prg01.hstn.tensor.pgs.com>, Steve Hocking wrote: > Is anyone else feeling rather snaky about this announcement? I'm rather cross > after having bought a TNT2U because of their previous release of a rather > limited open source GLX driver. Has anyone else ported the Voodoo 3 DRI stuff > over to FreeBSD yet? Or failing that, I guess I could buy myself a G400. For me, the situation is clear: Nvidia does not provide documentation to improve the sources they delivered and it seems they will also put effort into building a closed-source port of SGI's own OpenGL. Even if it was OpenSource, you would still into the problem of missing documentatition. The first consequence is that the G-400 (and maybe 3dfx) look much better in the long term. The second consequence is that many of the best people in the OpenSource OpenGL community jumped on the G-400 as a result of consequence 1), amoung them John Carmack. The people we're talking about here aren't just zealots that refuse to use Windows. Johnc at least is involved because he wants a better OpenGL than the Windows driver any consumer 3d card vendor delivers. He wants control and he wants at least one card pushed to the max. I bought a G-400 10 days ago... I think this is a bit unfair against 3dfx, who gave out the documentation as well. But they're behind in the GLX/DRI area and I think this will be the case for some time, since someone else will have to clean up a some messy bits. I.e. the fact that each glide shared lib is for just one generation of cards and that newer glide APIs aren't available for older cards. OpenSource people will pretty much require one does-it-all package to start with and someone will have to build it first. Martin -- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Martin Cracauer http://www.cons.org/cracauer/ BSD User Group Hamburg, Germany http://www.bsdhh.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 5:23:27 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from evil.2y.net (port-3-212.adsl.one.net [216.2.0.212]) by hub.freebsd.org (Postfix) with ESMTP id 73BAC14F3A for ; Mon, 24 Jan 2000 05:23:25 -0800 (PST) (envelope-from cokane@evil.2y.net) Received: (from cokane@localhost) by evil.2y.net (8.9.3/8.9.3) id IAA22799 for multimedia@freebsd.org; Mon, 24 Jan 2000 08:26:42 -0500 (EST) (envelope-from cokane) Date: Mon, 24 Jan 2000 08:26:42 -0500 From: Coleman Kane To: multimedia@freebsd.org Subject: TV out and video cards Message-ID: <20000124082642.A22785@evil.2y.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="AqsLC8rIMeq19msA" X-Mailer: Mutt 1.0i X-Vim: vim:tw=70:ts=4:sw=4 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --AqsLC8rIMeq19msA Content-Type: text/plain; charset=us-ascii Hi, what kind of TV out support does FreeBSD have for Video cards, like Matrox, nVidia, or ATI? I would like to know which is better under freebsd, I will probably base my next card purchase on that. --cokane --AqsLC8rIMeq19msA Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.0 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE4jFMSERViMObJ880RAbi5AJ437FsLQTcGVJyfyItQKytVN5VTuQCgvw8f FT4bIw/llKpe0KjTd4U+RwA= =SrFd -----END PGP SIGNATURE----- --AqsLC8rIMeq19msA-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 5:28:40 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from wop21.wop.wtb.tue.nl (wop21.wop.wtb.tue.nl [131.155.56.216]) by hub.freebsd.org (Postfix) with ESMTP id 0987B14F4F for ; Mon, 24 Jan 2000 05:28:38 -0800 (PST) (envelope-from karelj@wop21.wop.wtb.tue.nl) Received: (from karelj@localhost) by wop21.wop.wtb.tue.nl (8.9.3/8.9.3) id OAA00714; Mon, 24 Jan 2000 14:28:33 +0100 (CET) (envelope-from karelj) Date: Mon, 24 Jan 2000 14:28:33 +0100 From: "Karel J. Bosschaart" To: Steve Reid , freebsd-multimedia@freebsd.org Subject: Re: location of glx.conf? Message-ID: <20000124142832.A682@wop21.wop.wtb.tue.nl> Reply-To: K.J.Bosschaart@wtb.tue.nl References: <20000123190444.A12242@wop21.wop.wtb.tue.nl> <20000123125228.A423@grok.localnet> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <20000123125228.A423@grok.localnet> Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, Jan 23, 2000 at 12:52:28PM -0800, Steve Reid wrote: > On Sun, Jan 23, 2000 at 07:04:44PM +0100, Karel J. Bosschaart wrote: > > I guess I'm overlooking something, but I can't find out where to put > > the glx.conf file for hw-accelerated OpenGL. I tried /etc because > > XF86Config is located there as well but the glx module loads without > > reading it. Tried some other locations as well, but no success. > > When you run autogen.sh (which runs gnu configure) it'll say where the > configuration file is expected. Usually /etc/X11. > > This has been changed around a few times as the project developed so I > have my actual file as /etc/glx.conf, and have /etc/X11/glx.conf and > /usr/X11R6/etc/X11/glx.conf as symlinks to glx.conf. Works for me. > > BTW, I'm assuming you're talking about Utah-GLX at > http://utah-glx.sourceforge.net/ I installed from the ports (graphics/glx), which is indeed Utah-GLX, though it seems a rather dated version (August '99). I tried the symlinks mentioned, but still glx is loading with default values for the dma stuff :-(. Hmmm, I didn't find autogen.sh, also it rather puzzles me why I couldn't find any sample glx.conf in the port's working directory. The only one I found was from the mailing list archive at utah-glx. Maybe these sources are really outdated?? Thanks, Karel. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 7:39:44 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from melete.ch.intel.com (melete.ch.intel.com [143.182.246.25]) by hub.freebsd.org (Postfix) with ESMTP id 0B73214C96 for ; Mon, 24 Jan 2000 07:39:42 -0800 (PST) (envelope-from jreynold@sedona.ch.intel.com) Received: from sedona.intel.com (sedona.ch.intel.com [143.182.218.21]) by melete.ch.intel.com (8.9.1a+p1/8.9.1/d: relay.m4,v 1.18 2000/01/07 21:56:55 dmccart Exp $) with ESMTP id PAA21229; Mon, 24 Jan 2000 15:40:36 GMT Received: from hip186.ch.intel.com (hip186.ch.intel.com [143.182.225.68]) by sedona.intel.com (8.9.1a/8.9.1/d: sendmail.cf,v 1.8 1999/04/16 15:25:49 steved Exp steved $) with ESMTP id IAA13102; Mon, 24 Jan 2000 08:39:19 -0700 (MST) X-Envelope-From: jreynold@sedona.ch.intel.com Received: (from jreynold@localhost) by hip186.ch.intel.com (8.9.1a/8.9.1/d: client.m4,v 1.3 1998/09/29 16:36:11 sedayao Exp sedayao $) id KAA19996; Mon, 24 Jan 2000 10:39:20 -0500 (EST) X-Authentication-Warning: hip186.ch.intel.com: jreynold set sender to jreynold@sedona.ch.intel.com using -f From: John Reynolds~ MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14476.29224.91921.776024@hip186.ch.intel.com> Date: Mon, 24 Jan 2000 08:39:20 -0700 (MST) To: Vince Vielhaber Cc: freebsd-multimedia@freebsd.org Subject: Re: no mp3, no realaudio on 2.2.8 In-Reply-To: References: X-Mailer: VM 6.75 under Emacs 20.3.11 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [ On Saturday, January 22, Vince Vielhaber wrote: ] > > Any client I try whether it's on a local file or a remote feed, it will > connect and freeze shortly afterward - with the exception of realplayer > which just sits there. Any of the xaudio series, mpg123, xamp will get > to opening the file and hangs. RealPlayer (ver 5.0 for linux) will open > the file and just sit there. I can advance it and hear really short > sounds as I advance it but that's it. If it's a live feed or a remote > file it will buffer and stop. Be it mp3 or realaudio, it acts like it > just can't progress thru the file or stream. > > Any idea where to start troubleshooting? I've gone thru a few kernel > configs, but nothing major and nothing I can think of that could have > made a difference (USERLDT, MAXUSERS, bpfilter). I've changed the > motherboard (upgrade) and RAM (also upgrade) but the problem was there > before and is still there now. for what it's worth, I see the same behavior with 3.4-STABLE. I haven't tried to more thoroughly debug what's going on with RealAudio feeds as it is just too low on my priority list (for now)--but I do see the same behavior. -Jr -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | John Reynolds WCCG, CCE, Higher Levels of Abstraction | | Intel Corporation MS: CH6-210 Phone: 480-554-9092 pgr: 602-868-6512 | | jreynold@sedona.ch.intel.com http://www-aec.ch.intel.com/~jreynold/ | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 7:45:58 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from paprika.michvhf.com (paprika.michvhf.com [209.57.60.12]) by hub.freebsd.org (Postfix) with SMTP id 6D9E014D52 for ; Mon, 24 Jan 2000 07:45:35 -0800 (PST) (envelope-from vev@michvhf.com) Received: (qmail 1981 invoked by uid 1001); 24 Jan 2000 15:45:31 -0000 Date: Mon, 24 Jan 2000 10:45:31 -0500 (EST) From: Vince Vielhaber To: John Reynolds~ Cc: freebsd-multimedia@freebsd.org Subject: Re: no mp3, no realaudio on 2.2.8 In-Reply-To: <14476.29224.91921.776024@hip186.ch.intel.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 24 Jan 2000, John Reynolds~ wrote: > > [ On Saturday, January 22, Vince Vielhaber wrote: ] > > > > Any client I try whether it's on a local file or a remote feed, it will > > connect and freeze shortly afterward - with the exception of realplayer > > which just sits there. Any of the xaudio series, mpg123, xamp will get > > to opening the file and hangs. RealPlayer (ver 5.0 for linux) will open > > the file and just sit there. I can advance it and hear really short > > sounds as I advance it but that's it. If it's a live feed or a remote > > file it will buffer and stop. Be it mp3 or realaudio, it acts like it > > just can't progress thru the file or stream. > > > > Any idea where to start troubleshooting? I've gone thru a few kernel > > configs, but nothing major and nothing I can think of that could have > > made a difference (USERLDT, MAXUSERS, bpfilter). I've changed the > > motherboard (upgrade) and RAM (also upgrade) but the problem was there > > before and is still there now. > > for what it's worth, I see the same behavior with 3.4-STABLE. I haven't tried > to more thoroughly debug what's going on with RealAudio feeds as it is just > too low on my priority list (for now)--but I do see the same behavior. Late last nite I 'tried one last thing' and it happened to be the solution. Plug and pray got me. Since my hauppauge tv card was still working fine, I figured the hardware was fine. What I totally forgot about was the tv card connects with a jumper and doesn't go thru the machine at all. I removed IRQ5 and DMA5 from PnP eligibility and away it all went. It started making sense when icecast's shout worked and mpg123 worked in 'test' mode or to stdout since none of them use the soundcard. Vince. -- ========================================================================== Vince Vielhaber -- KA8CSH email: vev@michvhf.com http://www.pop4.net 128K ISDN: $24.95/mo or less - 56K Dialup: $17.95/mo or less at Pop4 Online Campground Directory http://www.camping-usa.com Online Giftshop Superstore http://www.cloudninegifts.com ========================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 11:41:25 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from tusk.mountain-inter.net (tusk.mountain-inter.net [204.244.200.1]) by hub.freebsd.org (Postfix) with ESMTP id 5FC5214D77 for ; Mon, 24 Jan 2000 11:40:49 -0800 (PST) (envelope-from sreid@sea-to-sky.net) Received: from grok.localnet (unknown@analog14.sq.mntn.net [204.244.200.23]) by tusk.mountain-inter.net (8.9.3/8.9.3) with ESMTP id LAA07887; Mon, 24 Jan 2000 11:40:17 -0800 Received: by grok.localnet (Postfix, from userid 1000) id A706F212E07; Mon, 24 Jan 2000 11:40:43 -0800 (PST) Date: Mon, 24 Jan 2000 11:40:43 -0800 From: Steve Reid To: K.J.Bosschaart@wtb.tue.nl Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: location of glx.conf? Message-ID: <20000124114043.A396@grok.localnet> References: <20000123190444.A12242@wop21.wop.wtb.tue.nl> <20000123125228.A423@grok.localnet> <20000124142832.A682@wop21.wop.wtb.tue.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <20000124142832.A682@wop21.wop.wtb.tue.nl>; from Karel J. Bosschaart on Mon, Jan 24, 2000 at 02:28:33PM +0100 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Jan 24, 2000 at 02:28:33PM +0100, Karel J. Bosschaart wrote: > I installed from the ports (graphics/glx), which is indeed Utah-GLX, > though it seems a rather dated version (August '99). I tried the > symlinks mentioned, but still glx is loading with default values > for the dma stuff :-(. Yes... Back then it didn't have a configuration file. It used environment variables instead. The port maintainer is a TNT2 person and there hasn't really been any improvement in the driver for that card (no specs). The MGA driver has progressed quite a bit though, so if you're using a G200/G400 it really is worth it to get a more recent version. Unfortunately the current version of Utah-GLX in CVS is broken for FreeBSD (at least it is on my system). Breakage happened some time between December 23rd and January 15th. December 23rd source works fine for me; you should be able to get that version by specifying a date flag to CVS ("-D 1999-12-23" I think). Further instructions are at http://utah-glx.sourceforge.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 11:49: 1 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from wop21.wop.wtb.tue.nl (wop21.wop.wtb.tue.nl [131.155.56.216]) by hub.freebsd.org (Postfix) with ESMTP id 3766914DC8 for ; Mon, 24 Jan 2000 11:48:56 -0800 (PST) (envelope-from karelj@wop21.wop.wtb.tue.nl) Received: (from karelj@localhost) by wop21.wop.wtb.tue.nl (8.9.3/8.9.3) id UAA00998; Mon, 24 Jan 2000 20:48:48 +0100 (CET) (envelope-from karelj) Date: Mon, 24 Jan 2000 20:48:48 +0100 From: "Karel J. Bosschaart" To: Steve Reid , freebsd-multimedia@freebsd.org Subject: Re: location of glx.conf? Message-ID: <20000124204847.A965@wop21.wop.wtb.tue.nl> Reply-To: K.J.Bosschaart@wtb.tue.nl References: <20000123190444.A12242@wop21.wop.wtb.tue.nl> <20000123125228.A423@grok.localnet> <20000124142832.A682@wop21.wop.wtb.tue.nl> <20000124114043.A396@grok.localnet> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <20000124114043.A396@grok.localnet> Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, Jan 24, 2000 at 11:40:43AM -0800, Steve Reid wrote: > > Yes... Back then it didn't have a configuration file. It used > environment variables instead. > Aha, that explains why I didn't find a sample file. > The port maintainer is a TNT2 person and there hasn't really been any > improvement in the driver for that card (no specs). The MGA driver has > progressed quite a bit though, so if you're using a G200/G400 it really > is worth it to get a more recent version. > G200 for me... > Unfortunately the current version of Utah-GLX in CVS is broken for > FreeBSD (at least it is on my system). Breakage happened some time > between December 23rd and January 15th. December 23rd source works fine > for me; you should be able to get that version by specifying a date flag > to CVS ("-D 1999-12-23" I think). Further instructions are at > http://utah-glx.sourceforge.net/ Thanks! I'll give it a try one of these days... Karel. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jan 24 15:31:34 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from cain.gsoft.com.au (genesi.lnk.telstra.net [139.130.136.161]) by hub.freebsd.org (Postfix) with ESMTP id E869615942 for ; Mon, 24 Jan 2000 15:31:27 -0800 (PST) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (doconnor@cain [203.38.152.97]) by cain.gsoft.com.au (8.8.8/8.8.8) with ESMTP id JAA08997; Tue, 25 Jan 2000 09:58:52 +1030 (CST) (envelope-from doconnor@gsoft.com.au) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20000124082642.A22785@evil.2y.net> Date: Tue, 25 Jan 2000 09:58:52 +1030 (CST) From: "Daniel O'Connor" To: Coleman Kane Subject: RE: TV out and video cards Cc: multimedia@freebsd.org Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 24-Jan-00 Coleman Kane wrote: > Hi, what kind of TV out support does FreeBSD have for Video cards, > like Matrox, nVidia, or ATI? I would like to know which is better > under freebsd, I will probably base my next card purchase on that. This is pretty much entirely an XFree86 issue (providing you use it :) --- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jan 25 3:11:24 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from nets5.rz.rwth-aachen.de (nets5.rz.RWTH-Aachen.DE [137.226.144.13]) by hub.freebsd.org (Postfix) with ESMTP id A6D5014CAD for ; Tue, 25 Jan 2000 03:11:21 -0800 (PST) (envelope-from kuku@gilberto.physik.RWTH-Aachen.DE) Received: from campino.informatik.rwth-aachen.de (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by nets5.rz.rwth-aachen.de (8.9.1a/8.9.1/10) with ESMTP id MAA29173 for ; Tue, 25 Jan 2000 12:11:19 +0100 (MET) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.30.2]) by campino.informatik.rwth-aachen.de (8.9.1a/8.9.1/3) with ESMTP id MAA08840 for ; Tue, 25 Jan 2000 12:11:37 +0100 (MET) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.9.3/8.6.9) id MAA98021 for multimedia@freebsd.org; Tue, 25 Jan 2000 12:11:18 +0100 (CET) Date: Tue, 25 Jan 2000 12:11:18 +0100 (CET) From: Christoph Kukulies Message-Id: <200001251111.MAA98021@gil.physik.rwth-aachen.de> To: multimedia@freebsd.org Subject: vic - qcam, other video sources? Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm trying to get vic working with either my Win/TV card or with my b/w quickcam (possible color quickcam as well). I understand that the qcam driver in the kernel is cumbersome and should be avoided. What alternatives are there? (I don't want to use the X11 grabber option of vic because this is tedious to adjust, I think). While being at it: could someone give me a mrouted.conf for a setup where I want to run a FreeBSD machine as a local videoconferencing reflector in a local area network only, no connection to upper leaves. -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jan 25 8:44:40 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (Postfix) with ESMTP id 615A61506B for ; Tue, 25 Jan 2000 08:44:33 -0800 (PST) (envelope-from roger@cs.strath.ac.uk) Received: from cs.strath.ac.uk (posh.dmem.strath.ac.uk [130.159.202.3]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with ESMTP id QAA26000 Tue, 25 Jan 2000 16:44:23 GMT Message-ID: <388DD2DE.2005BA9C@cs.strath.ac.uk> Date: Tue, 25 Jan 2000 16:44:14 +0000 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 4.0-CURRENT i386) X-Accept-Language: en MIME-Version: 1.0 To: Christoph Kukulies Cc: multimedia@FreeBSD.ORG Subject: Re: vic - qcam, other video sources? References: <200001251111.MAA98021@gil.physik.rwth-aachen.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Christoph, I use vic with my Hauppauge Win/TV card. > What alternatives are there? Bt848/Bt878 based grabbers, or the old Matrox Meteor and Matrox Meteor PPB grabbers. Roger To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jan 25 19:50:44 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from thelab.hub.org (nat194.150.mpoweredpc.net [142.177.194.150]) by hub.freebsd.org (Postfix) with ESMTP id 0DDDA14C3B for ; Tue, 25 Jan 2000 19:50:40 -0800 (PST) (envelope-from scrappy@hub.org) Received: from localhost (scrappy@localhost) by thelab.hub.org (8.9.3/8.9.1) with ESMTP id XAA05187 for ; Tue, 25 Jan 2000 23:50:31 -0400 (AST) (envelope-from scrappy@hub.org) X-Authentication-Warning: thelab.hub.org: scrappy owned process doing -bs Date: Tue, 25 Jan 2000 23:50:31 -0400 (AST) From: The Hermit Hacker To: freebsd-multimedia@freebsd.org Subject: fxtv ... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Morning all ... Am trying to get fxtv installed, from ports, and can't seem to get Xaw3d.6 to build as a shared library: thelab# make ===> Extracting for fxtv-1.02 >> Checksum OK for fxtv-1.02.tgz. ===> fxtv-1.02 depends on executable: gmake - found ===> fxtv-1.02 depends on shared library: tiff.4 - found ===> fxtv-1.02 depends on shared library: Xaw3d.6 - not found ===> Verifying install for Xaw3d.6 in /usr/ports/x11-toolkits/Xaw3d When it tries to build, it gets: ===> Building for Xaw3d-1.5 $(_NULLCMD_) expands to empty string $(_NULLCMD_) expands to empty string $(_NULLCMD_) expands to empty string $(_NULLCMD_) expands to empty string $(_NULLCMD_) expands to empty string $(_NULLCMD_) expands to empty string rm -f Box.o cc -c -O -I. -I/usr/X11R6/include -DARROW_SCROLLBAR -DUSEGRAY -DUSE_XWCHAR_STRING Box.c And in /usr/X11R6/lib, we have: thelab# ls /usr/X11R6/lib/libXaw3d* /usr/X11R6/lib/libXaw3d.a This is on a 4.0-CURRENT machine as of this afternoon, with ports updated to about an hour ago ... Help? :( Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy Systems Administrator @ hub.org primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jan 25 21: 4:24 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from thelab.hub.org (nat194.150.mpoweredpc.net [142.177.194.150]) by hub.freebsd.org (Postfix) with ESMTP id 01DC214D86 for ; Tue, 25 Jan 2000 21:04:21 -0800 (PST) (envelope-from scrappy@hub.org) Received: from localhost (scrappy@localhost) by thelab.hub.org (8.9.3/8.9.1) with ESMTP id BAA06156 for ; Wed, 26 Jan 2000 01:04:16 -0400 (AST) (envelope-from scrappy@hub.org) X-Authentication-Warning: thelab.hub.org: scrappy owned process doing -bs Date: Wed, 26 Jan 2000 01:04:16 -0400 (AST) From: The Hermit Hacker To: freebsd-multimedia@freebsd.org Subject: Kudos ... and questions ... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Morning all ... The other day, I got my computer back and started to get my life back together again ... upgrade my OS to a more recent 4.0-CURRENT, get my sound card and TV tuner card working, and I'm impressed at how easy this has become since I first startd using FreeBSD what feel like eons ago ... back in '94 or so ... Now, the question(s): 1. My Soundcard is a CreateLabs PCI128, and gets recognized as: pcm0: port 0x6900-0x693f irq 9 at device 11.0 on pci0 There is a second 'speaker port' on this back of this ... is there any way of making use of it? I tried plugging my speakers into it, and no sound comes out, so figure its either not possible, or I need to setup something differently ... 2. I have an older Hauppage WinTV Tuner card ... fxtv works beautifully on it, get full channels, etc, etc ... sounds works ... what I would *like* to do is 'setenv DISPLAY work:0.0' and watch TV at work, with full sound. Is this possible? If so, pointers would be appreciated ... 3. I have a second Hauppage WinTV Tuner card (NTSC 61351 Rev B226) that I've never been able to get the system to recognize ... I'm suspecting that the card itself might have a problem, but, if so, it was a 'lemon' from the factory, as its never been used :( Anyone have any ideas on whether there might be somethign I'm just overlooking to get this running, or should it just be simple 'plug it in and go'? Thanks... Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy Systems Administrator @ hub.org primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jan 26 1:55:34 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from korovev.stm.it (korovev.stm.it [195.62.33.1]) by hub.freebsd.org (Postfix) with ESMTP id 1A19E151DE for ; Wed, 26 Jan 2000 01:55:28 -0800 (PST) (envelope-from f.strazzullo@agora.stm.it) Received: from pc-strazzullo ([195.33.129.148]) by korovev.stm.it (8.9.2/8.9.2) with SMTP id KAA04689 for ; Wed, 26 Jan 2000 10:55:03 +0100 (ITA) Received: by localhost with Microsoft MAPI; Wed, 26 Jan 2000 10:54:28 +0100 Message-ID: <01BF67EB.B7A5DFE0.f.strazzullo@agora.stm.it> From: Franco Strazzullo To: "'multimedia@freebsd.org'" Subject: Soundblaster PCI128 Date: Wed, 26 Jan 2000 10:54:27 +0100 X-Mailer: Posta elettronica Internet di Microsoft/MAPI - 8.0.0.4211 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org HI ! This is Franco from Italy. I'm a new FreeBSD 3.4 user and I love it !!!! I've a SoundBlaster PCI128. Can you help me to configure my Kernel (V.3.4) ? Regard Franco Strazzullo ID-FBSD045554 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jan 26 2:13:41 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from rnocserv.urc.ac.ru (rnocserv.urc.ac.ru [193.233.85.2]) by hub.freebsd.org (Postfix) with ESMTP id 49BF9150F1 for ; Wed, 26 Jan 2000 02:13:18 -0800 (PST) (envelope-from anton@urc.ac.ru) Received: from urc.ac.ru (belle.rnoc.urc.ac.ru [193.233.85.10]) by rnocserv.urc.ac.ru (8.9.3/8.9.3) with ESMTP id PAA47434 for ; Wed, 26 Jan 2000 15:11:09 +0500 (ES) (envelope-from anton@urc.ac.ru) Message-ID: <388EC83C.5CB78F2@urc.ac.ru> Date: Wed, 26 Jan 2000 15:11:08 +0500 From: Anton Voronin Organization: URC FREEnet X-Mailer: Mozilla 4.7 [ru ] (X11; I; FreeBSD 3.4-STABLE i386) X-Accept-Language: ru, en MIME-Version: 1.0 Cc: "'multimedia@freebsd.org'" Subject: Re: Soundblaster PCI128 References: <01BF67EB.B7A5DFE0.f.strazzullo@agora.stm.it> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Franco Strazzullo wrote: > HI ! > This is Franco from Italy. > I'm a new FreeBSD 3.4 user and I love it !!!! > > I've a SoundBlaster PCI128. > Can you help me to configure my Kernel (V.3.4) ? Just add device pcm0 into your kernel, and then use /dev/MAKEDEV snd1. -- Anton Voronin | Network Administrator anton@urc.ac.ru | Ural Regional Center of FREEnet, http://www.urc.ac.ru/~anton | Southern Ural University, Chelyabinsk, Russia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jan 26 5:47:36 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from dqc.org (gonzo.st [208.44.74.16]) by hub.freebsd.org (Postfix) with ESMTP id 3968D14ECA for ; Wed, 26 Jan 2000 05:47:35 -0800 (PST) (envelope-from matt@dqc.org) Received: by dqc.org (Postfix, from userid 1005) id A7E73BB9E; Wed, 26 Jan 2000 05:47:34 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by dqc.org (Postfix) with ESMTP id A30FEACC2; Wed, 26 Jan 2000 05:47:34 -0800 (PST) Date: Wed, 26 Jan 2000 05:47:34 -0800 (PST) From: just matt To: The Hermit Hacker Cc: freebsd-multimedia@freebsd.org Subject: Re: Kudos ... and questions ... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > 2. > I have an older Hauppage WinTV Tuner card ... fxtv works > beautifully on it, get full channels, etc, etc ... sounds works ... what I > would *like* to do is 'setenv DISPLAY work:0.0' and watch TV at work, with > full sound. Is this possible? If so, pointers would be appreciated ... > This is a very bad idea. I've tried running fxtv on a remote display, and you get a max of about 2 minutes of choppy use before the machine with the WinTV card freezes and needs to be rebooted. This was with 10Mbps local ethernet, and I doubt 100Mbps would make it work any more stabler. If you want to watch tv remotely, your best bet is to use vic/vat to get things done, but the loss in quality is considerable. I got vic to work over my 10Mbps local ethernet, but I only got about 15 frames per second with rather dubious quality when only one machine was recieving it. It got worse as I added machines. The quality was poor enough(and cpu intensive enough) that I gave up and never tried to get vic to broadcast the audio. That and you can't change channels with vic so you're stuck with one channel remotely... I'm sure there is a way to get around that but considering the relative uselessness of it all, it wasn't worth the effort. - Matt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jan 26 8: 4:42 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from melete.ch.intel.com (melete.ch.intel.com [143.182.246.25]) by hub.freebsd.org (Postfix) with ESMTP id D1D4A14E3E for ; Wed, 26 Jan 2000 08:04:40 -0800 (PST) (envelope-from jreynold@sedona.ch.intel.com) Received: from sedona.intel.com (sedona.ch.intel.com [143.182.218.21]) by melete.ch.intel.com (8.9.1a+p1/8.9.1/d: relay.m4,v 1.18 2000/01/07 21:56:55 dmccart Exp $) with ESMTP id QAA07480; Wed, 26 Jan 2000 16:02:28 GMT Received: from hip186.ch.intel.com (hip186.ch.intel.com [143.182.225.68]) by sedona.intel.com (8.9.1a/8.9.1/d: sendmail.cf,v 1.8 1999/04/16 15:25:49 steved Exp steved $) with ESMTP id JAA21657; Wed, 26 Jan 2000 09:01:16 -0700 (MST) X-Envelope-From: jreynold@sedona.ch.intel.com Received: (from jreynold@localhost) by hip186.ch.intel.com (8.9.1a/8.9.1/d: client.m4,v 1.3 1998/09/29 16:36:11 sedayao Exp sedayao $) id LAA26229; Wed, 26 Jan 2000 11:01:17 -0500 (EST) X-Authentication-Warning: hip186.ch.intel.com: jreynold set sender to jreynold@sedona.ch.intel.com using -f From: John Reynolds~ MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14479.6732.646985.649018@hip186.ch.intel.com> Date: Wed, 26 Jan 2000 09:01:16 -0700 (MST) To: Anton Voronin Cc: "'multimedia@freebsd.org'" Subject: Re: Soundblaster PCI128 In-Reply-To: <388EC83C.5CB78F2@urc.ac.ru> References: <01BF67EB.B7A5DFE0.f.strazzullo@agora.stm.it> <388EC83C.5CB78F2@urc.ac.ru> X-Mailer: VM 6.75 under Emacs 20.3.11 Cc: Franco Strazzullo Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [ On Wednesday, January 26, Anton Voronin wrote: ] > Franco Strazzullo wrote: > > > HI ! > > This is Franco from Italy. > > I'm a new FreeBSD 3.4 user and I love it !!!! > > > > I've a SoundBlaster PCI128. > > Can you help me to configure my Kernel (V.3.4) ? > > Just add device pcm0 into your kernel, and then use /dev/MAKEDEV snd1. > Also don't forget to turn up the volume with 'mixer' when you boot in rc.local or some other mechanism. The defaults are all zero's so even if you configure it correctly, you won't hear output! -Jr -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | John Reynolds WCCG, CCE, Higher Levels of Abstraction | | Intel Corporation MS: CH6-210 Phone: 480-554-9092 pgr: 602-868-6512 | | jreynold@sedona.ch.intel.com http://www-aec.ch.intel.com/~jreynold/ | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jan 27 3: 7:25 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (Postfix) with ESMTP id 6F76B154F8 for ; Thu, 27 Jan 2000 03:07:12 -0800 (PST) (envelope-from roger@cs.strath.ac.uk) Received: from cs.strath.ac.uk (posh.dmem.strath.ac.uk [130.159.202.3]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with ESMTP id LAA10218 Thu, 27 Jan 2000 11:07:11 GMT Message-ID: <389026DE.5E6EB55C@cs.strath.ac.uk> Date: Thu, 27 Jan 2000 11:07:10 +0000 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 4.0-CURRENT i386) X-Accept-Language: en MIME-Version: 1.0 To: multimedia@freebsd.org Subject: does full duplex work on the ES1370/1371 SB PCI cards? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, Does full duplex work on the ES1370, ES1371, ES1373 PCI sound card chipset? I tried cat /dev/audio > /dev/audio with the 'old' PCM driver on my 3.3 machine and got "device busy" This was the old quick full-duplex test for my ISA sound cards with Luigi's driver. Does it work with the proper ioctls, and/or with the 4.x-current NewPCM? I just wanted to check for someone before they buy. The plan is for the card to work with the good old vic/vat team. Roger To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jan 27 10: 2:43 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from pinhead.parag.codegen.com (207-44-235-154.CodeGen.COM [207.44.235.154]) by hub.freebsd.org (Postfix) with ESMTP id 35FD6158F3 for ; Thu, 27 Jan 2000 10:02:40 -0800 (PST) (envelope-from parag@pinhead.parag.codegen.com) Received: from pinhead.parag.codegen.com (parag@localhost.parag.codegen.com [127.0.0.1]) by pinhead.parag.codegen.com (8.9.3/8.9.3) with ESMTP id KAA96568 for ; Thu, 27 Jan 2000 10:02:38 -0800 (PST) (envelope-from parag@pinhead.parag.codegen.com) To: multimedia@FreeBSD.ORG Subject: ES1371 PCI card questions In-Reply-To: Message from Roger Hardiman of "Thu, 27 Jan 2000 11:07:10 GMT." <389026DE.5E6EB55C@cs.strath.ac.uk> X-Image-URL: http://www.codegen.com/images/CG-logo-only.gif X-URL: http://www.codegen.com X-Face: =O'Kj74icvU|oS*<7gS/8'\Pbpm}okVj*@UC!IgkmZQAO!W[|iBiMs*|)n*`X ]pW%m>Oz_mK^Gdazsr.Z0/JsFS1uF8gBVIoChGwOy{EK=<6g?aHE`[\S]C]T0Wm Date: Thu, 27 Jan 2000 10:02:38 -0800 Message-ID: <96564.948996158@pinhead.parag.codegen.com> From: Parag Patel Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Another question about the ES1371. Under 3.4-STABLE and the pcm driver, I get this from mine at bootup: es1: rev 0x06 int a irq 18 on pci0.10.0 pcm1: using I/O space register mapping at 0xb800 es1371: codec vendor \M^C\M^Dv revision 9 es1371: codec features Bass & Treble 18bit DAC 18bit ADC es1371: stereo enhancement: unknown (It seems a bit confused about the vendor name.) More oddly, the mixer can't set the bass or treble. Rather, it lets me set them, but it always reads back as zero and makes no difference to the sound output: $ mixer bass 100 Setting the mixer bass to 100:100. $ mixer Mixer vol is currently set to 100:100 Mixer bass is currently set to 0:0 Mixer treble is currently set to 0:0 Mixer pcm is currently set to 49:49 Mixer speaker is currently set to 64:64 Mixer line is currently set to 64:64 Mixer mic is currently set to 0:0 Mixer cd is currently set to 64:64 Mixer rec is currently set to 64:64 Mixer ogain is currently set to 64:64 Mixer line1 is currently set to 64:64 Mixer phin is currently set to 64:64 Mixer video is currently set to 64:64 $ Finally, I'm still unable to reliably record sound from the line-in at anything but the lowest rate. I had this problem with a SB AWE64 ISA card and was hoping that switching to a PCI sound card would work better. It still skips and jumps, as if it just can't keep up, regardless of what tool I'm using to record. Any thoughts? Thanks in advance! -- Parag Patel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jan 27 15:35:46 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from mail-ob.kamp.net (mail-ob.kamp.net [195.62.97.26]) by hub.freebsd.org (Postfix) with ESMTP id 7B89115589 for ; Thu, 27 Jan 2000 15:35:42 -0800 (PST) (envelope-from Joachim.Jaeckel@d.kamp.net) Received: from d.kamp.net (port-59.d.kamp.de [195.62.120.251]) by mail-ob.kamp.net (8.9.3/8.9.3) with ESMTP id AAA12029 for ; Fri, 28 Jan 2000 00:35:40 +0100 Message-ID: <3890D707.587AFC9F@d.kamp.net> Date: Fri, 28 Jan 2000 00:38:47 +0100 From: "Joachim Jäckel" X-Mailer: Mozilla 4.07 [en] (X11; I; FreeBSD 3.3-19991111-STABLE i386) MIME-Version: 1.0 To: freebsd-multimedia@freebsd.org Subject: Really simple grabber-app only for pictures...? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, could you point me to a really simple applications, which grabs only the video-pictures over the meteor/bttv-interface into a file (or on X)? (I found the metgrab utility from Danny Dulay for the Matrox-Meteor, but is there additionally another one?) Or do you know, if there is an application with which I could convert YUV422 or RGB?? to mjpeg|avi etc.? Thanks in advance. -- Joachim.Jaeckel@d.kamp.net -- http://home.kamp.net/home/joachim.jaeckel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jan 27 18: 5:43 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from w8hd2.w8hd.org (w8hd2.w8hd.org [198.252.159.25]) by hub.freebsd.org (Postfix) with ESMTP id 3EB5E15944 for ; Thu, 27 Jan 2000 17:58:45 -0800 (PST) (envelope-from kimc@w8hd.org) Received: from w8hd2.w8hd.org (w8hd2.w8hd.org [198.252.159.25]) by w8hd2.w8hd.org (8.9.3/8.9.3) with ESMTP id UAA29154; Thu, 27 Jan 2000 20:17:12 -0500 (EST) Date: Thu, 27 Jan 2000 20:17:12 -0500 (EST) From: Kim Culhan To: John Reynolds~ Cc: Anton Voronin , "'multimedia@freebsd.org'" , Franco Strazzullo Subject: Re: Soundblaster PCI128 In-Reply-To: <14479.6732.646985.649018@hip186.ch.intel.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 26 Jan 2000, John Reynolds~ wrote: > [ On Wednesday, January 26, Anton Voronin wrote: ] > > Franco Strazzullo wrote: > > > > > HI ! > > > This is Franco from Italy. > > > I'm a new FreeBSD 3.4 user and I love it !!!! Cool.. > > > I've a SoundBlaster PCI128. > > > Can you help me to configure my Kernel (V.3.4) ? > > > > Just add device pcm0 into your kernel, and then use /dev/MAKEDEV snd1. > > > > Also don't forget to turn up the volume with 'mixer' when you boot in > rc.local or some other mechanism. The defaults are all zero's so even if > you configure it correctly, you won't hear output! I'm running 3.4-STABLE and when it boots the mixer settings are: # mixer Mixer vol is currently set to 64:64 Mixer bass is currently set to 0:0 Mixer treble is currently set to 0:0 Mixer pcm is currently set to 100:100 Mixer speaker is currently set to 64:64 Mixer line is currently set to 64:64 Mixer mic is currently set to 64:64 Mixer cd is currently set to 64:64 Mixer rec is currently set to 64:64 Mixer ogain is currently set to 64:64 Mixer line1 is currently set to 64:64 Mixer phin is currently set to 64:64 Mixer phout is currently set to 64:64 Mixer video is currently set to 64:64 This is an 'Ensoniq AudioPCI' -not a 128 but in the ES1370/1371 family. -kim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jan 28 0: 3:56 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from kiew.egd.igd.fhg.de (kiew.egd.igd.fhg.de [192.102.170.32]) by hub.freebsd.org (Postfix) with ESMTP id AB72D14D70 for ; Fri, 28 Jan 2000 00:03:46 -0800 (PST) (envelope-from runge@rostock.zgdv.de) Received: from rostock.zgdv.de (kingfisher.egd.igd.fhg.de [153.96.43.107]) by kiew.egd.igd.fhg.de (Netscape Messaging Server 3.6) with ESMTP id AAA4B94 for ; Fri, 28 Jan 2000 09:01:25 +0100 Message-ID: <38914C30.2F3A0A07@rostock.zgdv.de> Date: Fri, 28 Jan 2000 08:58:40 +0100 From: "Thomas Runge" Organization: http://www.rostock.zgdv.de X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: Really simple grabber-app only for pictures...? References: <3890D707.587AFC9F@d.kamp.net> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org "Joachim Jäckel" wrote: > > Hello, > > could you point me to a really simple applications, which grabs only the > video-pictures over the meteor/bttv-interface into a file (or on X)? For just grabbing pictures to jpeg: http://www.rostock.zgdv.de/~runge/bktr2jpeg.c -- Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jan 28 3: 2:27 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (Postfix) with ESMTP id 22DFE14A28 for ; Fri, 28 Jan 2000 03:02:24 -0800 (PST) (envelope-from roger@cs.strath.ac.uk) Received: from cs.strath.ac.uk (posh.dmem.strath.ac.uk [130.159.202.3]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with ESMTP id KAA10033 Fri, 28 Jan 2000 10:39:58 GMT Message-ID: <389171FE.8214AE37@cs.strath.ac.uk> Date: Fri, 28 Jan 2000 10:39:58 +0000 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 4.0-CURRENT i386) X-Accept-Language: en MIME-Version: 1.0 To: Joachim =?iso-8859-1?Q?J=E4ckel?= Cc: freebsd-multimedia@freebsd.org Subject: Re: Really simple grabber-app only for pictures...? References: <3890D707.587AFC9F@d.kamp.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi > could you point me to a really simple applications, which grabs only the > video-pictures over the meteor/bttv-interface into a file (or on X)? There is one in my ftp directory ftp://telepresence.dmem.strath.ac.uk/pub/bt848 Roger To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jan 28 5:15:35 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from anchor-post-31.mail.demon.net (anchor-post-31.mail.demon.net [194.217.242.89]) by hub.freebsd.org (Postfix) with ESMTP id 58A7315AA8 for ; Fri, 28 Jan 2000 05:15:25 -0800 (PST) (envelope-from steve@snuggly.demon.co.uk) Received: from snuggly.demon.co.uk ([212.229.111.142]) by anchor-post-31.mail.demon.net with esmtp (Exim 2.12 #1) id 12EBFA-000BBz-0V for multimedia@freebsd.org; Fri, 28 Jan 2000 13:15:20 +0000 Received: from localhost (steve@localhost) by snuggly.demon.co.uk (8.9.3/8.9.3) with ESMTP id NAA00438 for ; Fri, 28 Jan 2000 13:15:18 GMT (envelope-from steve@snuggly.demon.co.uk) Date: Fri, 28 Jan 2000 13:15:18 +0000 (GMT) From: Steve Roome To: multimedia@freebsd.org Subject: Fxtv/Alevt with ModularTech MM100TV(UK) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Firstly Apologies for the size of this email, I've tried to include ALL the relevant information! I need some help getting Alevt and Fxtv to work.. (please send or cc any replies to steve@snuggly.demon.co.uk, I've not yet subscribed) At the end of this message is a rather huge amount of infomation, (scroll down to INFORMATION) other stuff to mention are that the version of XF86 I'm using I've patched with NVidia's original glx patches (I've an AGP RIVA TNT2 Ultra card 32Mb, a "Maxi Gamer Xentor 32"), the mainboard is the FIC-SD11 (rev 1.7/1.8 can't remember). The case is beige and has LED's on it. (I bet I've still forgotten to mention something!) PART 1: FXTV ------------ Anyway, fxtv works, although I need to force it to PALBDGHI as I'm in the UK. ** Question 1) Is that right, or should it be PAL/N or something. As far as getting fxtv to record though, it doesn't. Well, it takes snapshot images, and it will "record" a series of snapshots in MPEG ready or something but it won't encode them (the script seems to try and encode them as audio, even with the audio recording option disabled). ** Question 2) I've followed the instructions with fxtv to the letter (I think), so why do I not get mpegs (video) to encode, or more precisiely where exactly should I look to find why it does this !? If I press record with the audio capture enabled button on, then fxtv hangs, indefinitely it would seem, kill -9 still works though. ** Question 3) Is this a known problem with the pcm driver or with fxtv, or what.. (btw my yamaha card still thinks the CD is connected as "synth", and I've no individual mixer channel which controls the TV sound (I think it's plugged into line in or mic in though) [Side issue, any possibility of getting the mixer to work better for me?!] PART 2: ALEVT ------------- I've compile alevt straight from ports, and also vbidecode. (for version numbers see below), however neither seem to work, and the minimal documentation for vbidecode doesn't tell me very much, and it's idea of debugging is appalling! Alevt opens windows and operates as expected, apart from no teletext gets received, alevt-date doesn't work and even the two text test programs from luigi's homepage don't work (not got the link handy sorry). So, I'm assuming the sysctl settings are wrong (well, i'm sure they are!!) So, how do I fix it.. and decide what the settings are.. I can't base it on the windows driver, because that is the worst piece of software I've ever seen (some app PCTV32.exe gets installed on my desktop when windows first finds the card - mmm!), besides it only lets me watch TV at about 5fps, (yes, five fps!), whereas FreeBSD with fxtv is superb. ** Question 4) Does anyone have the interface specs for /dev/vbi, I can't find them! Or does anyone know if I need to use fxtv to change channel at the same time as I'm using alevt, or whether I might stand a better chance trying to get vbidecode to work ? (now for some other questions, only vaguely related, but this is big already) ** Question 5) Is there a TV card than can decode digital cable yet, I've got that at home too and I'd be interested in that one. ** Question 6) My cable box at home is a PACE box (provided by Telewest), I beleive it's a rebadged DiTV1000. It's got an RJ45 plug on the back and from my research chooses random IP addresses on bootup (fairly random it seems), it seems to just do the odd arp request, not even sure it does arp responses properly though. Has anyone else looked at these boxes in more detail and can one get, say an mpeg stream out of them ? Thanks very much for your time, whoever you are reading this, Steve Roome [steve@snuggly.demon.co.uk] -------- INFORMATION ------------- -------- output from "sysctl -A | grep bt848" hw.bt848.card: -1 hw.bt848.tuner: -1 hw.bt848.reverse_mute: -1 hw.bt848.format: -1 -------- pciconf -l output chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x70061022 rev=0x23 hdr=0x00 chip1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x70071022 rev=0x01 hdr=0x01 bktr0@pci0:4:0: class=0x040000 card=0x00000000 chip=0x0350109e rev=0x12 hdr=0x00 chip2@pci0:7:0: class=0x060100 card=0x00001106 chip=0x06861106 rev=0x14 hdr=0x00 ide_pci0@pci0:7:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06 hdr=0x00 none0@pci0:7:4: class=0x0c0500 card=0x00000000 chip=0x30571106 rev=0x10 hdr=0x00 rl0@pci0:9:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00 vga0@pci1:5:0: class=0x030000 card=0x582014af chip=0x002910de rev=0x11 hdr=0x00 -------- dmesg output : Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-STABLE #0: Thu Jan 20 21:08:45 GMT 2000 root@snuggly.demon.co.uk:/usr/src/sys/compile/SNUGGLY Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K7(tm) Processor (499.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x612 Stepping = 2 Features=0x81f9ff AMD Features=0xc0400000<,,3DNow!> real memory = 67108864 (65536K bytes) config> en wdc1 config> po wdc1 0x170 config> ir wdc1 15 config> f wdc1 0xb0ffb0ff config> en wdc0 config> po wdc0 0x1f0 config> ir wdc0 14 config> f wdc0 0xb0ffb0ff config> pnp 1 0 os enable port0 0x220 port1 0x530 port2 0x388 port3 0x370 config> pnp 1 0 irq0 5 drq0 1 drq1 3 config> q avail memory = 62566400 (61100K bytes) Preloaded elf kernel "kernel" at 0xc0284000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc028409c. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: rev 0x23 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 bktr0: rev 0x12 int a irq 10 on pci0.4.0 bti2c0: iicbb0: on bti2c0 iicbus0: on iicbb0 master-only smbus0: on bti2c0 Miro TV, Temic NTSC tuner. chip2: rev 0x14 on pci0.7.0 ide_pci0: rev 0x06 on pci0.7.1 rl0: rev 0x10 int a irq 11 on pci0.9.0 rl0: Ethernet address: 00:00:b4:bd:3d:3c rl0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 1: vga0: rev 0x11 int a irq 11 on pci1.5.0 Probing for PnP devices: CSN 1 Vendor ID: YMH0800 [0x0008a865] Serial 0xffffffff Comp ID: PNPb02f [0x2fb0d041] mss_attach 1 at 0x530 irq 5 dma 1:3 flags 0x13 setting up yamaha registers set yamaha master volume to max pcm1 (CS423x/Yamaha/AD1816 sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A pcm0 not probed due to drq conflict with pcm1 at 1 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ffb0ff on isa wdc0: unit 0 (wd0): , LBA, DMA, 32-bit, multi-block-16 wd0: 32634MB (66835440 sectors), 4160 cyls, 255 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 flags 0xb0ffb0ff on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordy acd0: drive speed 1375 - 2921KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 changing root device to wd0s1a -------- Kernel Config File : machine "i386" cpu "I686_CPU" ident SNUGGLY maxusers 64 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SOFTUPDATES config kernel root on wd0 controller isa0 controller pnp0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xb0ffb0ff disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 flags 0xb0ffb0ff disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 13 device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 controller ppbus0 device lpt0 at ppbus? device rl0 pseudo-device loop pseudo-device ether pseudo-device tun 1 pseudo-device pty 256 pseudo-device gzip # Exec gzipped a.out's pseudo-device vn options SYSVSHM options SYSVMSG options SYSVSEM pseudo-device bpfilter 4 #Berkeley packet filter device pcm0 at isa ? port ? tty irq 5 drq 1 flags 0x15 device ppc0 at isa? port? flags 0x40 net irq 7 #This isn't a pentium options "NO_F00F_HACK" ##################################################################### # POSIX P1003.1B # Real time extensions added int the 1993 Posix # P1003_1B: Infrastructure # _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING # _KPOSIX_VERSION: Version kernel is built for options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" device apm0 at isa? # The 'bktr' device is a PCI video capture device using the Brooktree # bt848/bt848a/bt849/bt878/bt879 chipset. When used with a TV Tuner it forms a # TV card, eg Miro PC/TV,Hauppauge WinCast/TV WinTV, VideoLogic Captivator, # Intel Smart Video III, AverMedia, IMS Turbo. # The following options can be used to override the auto detection # options OVERRIDE_CARD=xxx # options OVERRIDE_TUNER=xxx # options OVERRIDE_MSP=1 # options OVERRIDE_DBX=1 # The current values are found in src/sys/dev/bktr/bktr_card.h # # option BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL # This is required for Dual Crystal (28&35Mhz) boards where PAL is used # to prevent hangs during initialisation. eg VideoLogic Captivator PCI. # # PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal) # must enable PLL mode with this option. eg some new Hauppauge cards. # option BKTR_USE_PLL # # Using sysctl(8) run-time overrides on a per-card basis can be made # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. controller smbus0 controller iicbus0 controller iicbb0 # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr0 -------- Packages/ports installed (from /bin/ls -1 in /var/db/pkg) Mesa-3.0 XFree86-3.3.3.1 Xaw3d-1.5 acm-5.0 amp-0.7.6 autoconf-2.13 bash-2.03 cdd-1.0 cvsup-bin-16.0 dap-2.0.2 fping-1.20 fvwm-2.2 fxtv-1.02 gemdropx-0.4 ghostscript-5.50 gmake-3.77 gnuls-4.0 gsm-1.0.10 gv-3.5.8 healthd-0.2 imap-uw-4.7 jpeg-6b lesstif-0.89.4 libtool-1.3.3 linux-realplayer-5.0 linux_glide-2.4 linux_lib-2.6.1 lynx-2.8.2dev.22 m4-1.4 mirrormagic-1.3 mp3encode-1.10 mp3info-0.2.16 mpeg_encode-1.5b mpeg_play-2.4 mpg123-0.59r mplex-1.1 netpbm-8.0 netscape-communicator-4.51 opengl-man-657 pine-4.10 pkg_version-0.1 png-1.0.3 rplay-3.2.0b6 sniffit-0.3.7b sox-12.16 t1lib-1.0 tcl-7.6 tcl-8.0.5 tiff-3.4b37 tk-4.2 tk-8.0.5 trafshow-2.0 unzip-5.40 vat-4.0b2 vbidecode-1.1.3 x11amp-0.8 xanim-2.80.1 xaos-3.0 xboing-2.4 xcogitate-1.02 xemacs-20.4 xengine-1.0.1 xforms-0.88.1 xgammon-0.98 xlife-3.0 xlockmore-4.15 xmmix-1.2 xmountains-2.4 xoids-1.5 xonix-1.4 xpdf-0.90 xpilot-4.1.0 xpipeman-1.0 xpm-3.4k xpuzzletama-1.5 xscavenger-1.3.5 xspacewarp-1.2 xtacy-1.14 xtet42-2.21 xv-3.10a xvier-1.0 xworm-1.02 zsh-3.1.5 -------- INFORMATION ENDS (thanks for bothering to read this far!) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jan 28 7: 5:24 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (Postfix) with ESMTP id 45BB1158C1 for ; Fri, 28 Jan 2000 07:05:18 -0800 (PST) (envelope-from roger@cs.strath.ac.uk) Received: from cs.strath.ac.uk (posh.dmem.strath.ac.uk [130.159.202.3]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with ESMTP id PAA20409 Fri, 28 Jan 2000 15:05:09 GMT Message-ID: <3891B00D.E5E4C993@cs.strath.ac.uk> Date: Fri, 28 Jan 2000 15:04:45 +0000 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 4.0-CURRENT i386) X-Accept-Language: en MIME-Version: 1.0 To: Steve Roome Cc: multimedia@FreeBSD.ORG Subject: Re: Fxtv/Alevt with ModularTech MM100TV(UK) References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Steve, > Anyway, fxtv works, although I need to force it to PALBDGHI as I'm in the UK. This is right. UK is actually PAL-I format. > PART 2: ALEVT > ------------- > > I've compile alevt straight from ports, and also vbidecode. (for version > numbers see below), however neither seem to work, and the minimal documentation > for vbidecode doesn't tell me very much, and it's idea of debugging is > appalling! just don't bother with vbidecode. I can make it work with the VideoText port, but really is a pain in the bumb. All you need is Alevt 1) start alevt FIRST!!!! 2) start fxtv 3) in fxtv, tune to the TV station you want teletext from. 4) it should all work. teletext cannot survive bad TV signals. If you get the video from your cable TV box you will be OK. > ** Question 4) Does anyone have the interface specs for /dev/vbi, I can't find > them! open /dev/vbi each frame has 16x2x2048 bytes of data in. You can read this from /dev/vbi. Reading from /dev/vbi blocks when there is no data to be read. You can use select to check if there is any data there before reading. > ** Question 5) Is there a TV card than can decode digital cable yet, I've got > that at home too and I'd be interested in that one. Hauppauge are about to release one. Roger To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jan 28 16:38:39 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from mail-ob.kamp.net (mail-ob.kamp.net [195.62.97.26]) by hub.freebsd.org (Postfix) with ESMTP id E4E29155F9 for ; Fri, 28 Jan 2000 16:38:34 -0800 (PST) (envelope-from Joachim.Jaeckel@d.kamp.net) Received: from d.kamp.net (port-55.d.kamp.de [195.62.120.247]) by mail-ob.kamp.net (8.9.3/8.9.3) with ESMTP id BAA30308 for ; Sat, 29 Jan 2000 01:38:32 +0100 Message-ID: <38923745.8ADE97CC@d.kamp.net> Date: Sat, 29 Jan 2000 01:41:41 +0100 From: "Joachim Jäckel" X-Mailer: Mozilla 4.07 [en] (X11; I; FreeBSD 3.3-19991111-STABLE i386) MIME-Version: 1.0 To: freebsd-multimedia@freebsd.org Subject: could need a little bit support with a device-driver Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, maybe someone could help me a little bit, to understand the following (or would correct me, if I'm wrong). My Miro DC10 Card is build like the following: (I'm currently for the beginning only interested in the decoder site) +---------+ +------------+ +---------+ | Decoder | | JPEG Codec | | Encoder | | SAA7110 | | ZR36060 | | ADV???? | +---------+ +------------+ +---------+ | | +---------------------+ | +------------+ | PCI Bridge | | ZR36067 | +------------+ | V ----------------PCI-Bus----------------------------- My "driver" currently detects the PCI-Bridge Processors ID, is mapping his registers to a program structure and initializes this structure. I think to fully initialize the decoder part of the card, I have to initialize the decoder chip, too. (The documentation of the PCI-Bridge chip is saying, that the chip offers an easy way [the post-office-protocoll] to communicate with all clients - but, because the decoder chip itself has an i2c interface, I've no idea, how to set the subaddresses for data-transfer to the i2c interface of the decoder-chip through the PCI-Bridge-chip.) Because of that, I think I've to program it similiar to the i2c-interface of the bktr-device. Therefore, I need the smbus, iicbus and iicbb (btw. what is the "bit-banging"-code?) in my kernel and have to register the i2c code with the "device_add_child" function etc. etc. (It seems to me, that I could copy the whole bktr_i2c.c file with only small changes to my driver, couldn't I?) Besides that, I would need some functions in the i2c-area, which would make my decoder initialization. Couldn´t I simply add a function with the new funktionality and call this new i2c-function from e.g. the ioctl-routine of my main-driver? How could I do write to my encoder with a slave-indicator and a sub-address (bti2c_smb_* functions?)? (I'll need an interface to the encoder which has also an i2c-interface in the future, too. - How could I get the slave-indicator value from the card? I think this interface would use the same i2c-code in the driver?) That are enough questions for the beginning, (I'll have severall in the future...) maybe you could help me a little bit, to see a little bit clearer. Thanks in advance, -- Joachim.Jaeckel@d.kamp.net -- http://home.kamp.net/home/joachim.jaeckel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sat Jan 29 5:35:57 2000 Delivered-To: freebsd-multimedia@freebsd.org Received: from w8hd.w8hd.org (w8hd.w8hd.org [198.252.159.10]) by hub.freebsd.org (Postfix) with ESMTP id 5463A15C53 for ; Sat, 29 Jan 2000 05:35:22 -0800 (PST) (envelope-from fbsd@kim.net) Received: from localhost (fbsd@localhost) by w8hd.w8hd.org (8.9.3/8.9.3) with ESMTP id IAA47902 for ; Sat, 29 Jan 2000 08:35:13 -0500 (EST) X-Authentication-Warning: w8hd.w8hd.org: fbsd owned process doing -bs Date: Sat, 29 Jan 2000 08:35:13 -0500 (EST) From: Kim Culhan X-Sender: fbsd@w8hd.w8hd.org To: multimedia@FreeBSD.org Subject: Re: does full duplex work on the ES1370/1371 SB PCI cards? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 27 Jan 2000, Roger Hardiman wrote: > Does it work with the proper ioctls, and/or with the 4.x-current NewPCM? > > I just wanted to check for someone before they buy. > The plan is for the card to work with the good old vic/vat team. Roger- I'm running recent 3.4-RELEASE and would be very interested in which card(s) work, if I knew of one card which worked correctly I'd order one immediately. The Creative Ensoniq AudioPCI probes like this: es1: rev 0x08 int a irq 10 on pci0.11.0 pcm1: using I/O space register mapping at 0xb800 es1371: codec vendor CRY revision 19 es1371: codec features Bass & Treble Headphone out 20bit DAC 18bit ADC es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement This appears not to operate in full duplex mode as cat /dev/audio > /dev/audio returns 'device busy.' This card is readily avaiable around here for less than $30 and it has very good electrical specs. tnx -kim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message