From owner-freebsd-hardware Sun May 6 5:33:34 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from nemesis.uk.clara.net (nemesis.uk.clara.net [195.8.69.86]) by hub.freebsd.org (Postfix) with ESMTP id 74B7337B424 for ; Sun, 6 May 2001 05:33:31 -0700 (PDT) (envelope-from pikas@clara.co.uk) Received: from du-028-0194.claranet.co.uk ([195.8.84.194] helo=owl) by nemesis.uk.clara.net with smtp (Exim 3.22 #2) id 14wNj8-000LoW-00 for freebsd-hardware@FreeBSD.ORG; Sun, 06 May 2001 13:33:30 +0100 Message-Id: <3.0.6.32.20010507133225.007aa670@mail.clara.net> X-Sender: pikas@mail.clara.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Mon, 07 May 2001 13:32:25 +0100 To: freebsd-hardware@FreeBSD.ORG From: PIKA! Subject: Probe hangs on ASUS VIA/AMD 761 Chipset Motherboard Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I used to run 2.2.5 quite happily on my PC: ASUS VIA/AMD 761 Chipset Motherboard AMD Duron Processor 128MB RAM 3125MB Samsung IDE drive 81MB IDE HD drive However I was having problems running linux emulation properly, so I decided to upgrade. I tried booting from the CD-ROM and the floppies, but the result is the same. After the boot sequence the blue screen comes up with "Probing devices, please wait, this will take some time..." Well, I left it over an hour and with still no joy. If I switch to the other terminal I see the following message: DEBUG: ioctl(3,TIOCCONS,NULL)=0 (success) DEBUG: Can't open PC-card crontroller /dev/card0 ata0-master: timeout waiting to give command=c8 s=e0 e=04 ad0: error executing command - resetting at0 - resetting devices... device disappeared! 3 done ata0-master: timeout waiting to give command=c8 s=e0 e=04 ad0: error executing command - resetting ata0-master: timeout waiting to give command=c8 s=e0 e=04 ad0: error executing command - resetting ata0-master: timeout waiting to give command=c8 s=e0 e=04 ad0: error executing command - resetting Here is what I've tried so far: a) Disabling all and various devices from the initial kernel config. b) Switching the IRQs over (just a guess!) for ata0 and ata1. Nothing I do seems to get beyond the probing devices message. Does anyone have a clue as to what is going wrong? Many thanks, David Carter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sun May 6 6: 4: 8 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from hotmail.com (f99.law4.hotmail.com [216.33.149.99]) by hub.freebsd.org (Postfix) with ESMTP id D094B37B43C for ; Sun, 6 May 2001 06:04:05 -0700 (PDT) (envelope-from messiah_man@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 6 May 2001 06:04:05 -0700 Received: from 212.97.250.29 by lw4fd.law4.hotmail.msn.com with HTTP; Sun, 06 May 2001 13:04:05 GMT X-Originating-IP: [212.97.250.29] From: "Munish Chopra" To: freebsd-hardware@freebsd.org Subject: The FreeBSD NVIDIA Driver Initiative Date: Sun, 06 May 2001 15:04:05 +0200 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 06 May 2001 13:04:05.0802 (UTC) FILETIME=[07BC30A0:01C0D62D] Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org If the following isn't an appropriate subject for discussion on this particular mailing list, please move ensuing discussion to one that is more appropriate (possibly -hackers or -hardware). We are a simply a few guys who at more or less the same time got tired of not having 3D-support for our NVIDIA cards in FreeBSD. So we decided to start 'The FreeBSD NVIDIA Driver Initiative'. As the name may say, we tried to figure out how we were going to get hardware accelerated 3D drivers for FreeBSD. After going through a bit of work and contacting NVIDIA, it's come to this: We are located at http://nvidia.netexplorer.org, from where we try to keep people updated on how the effort is going. We have taken over Michael Carlson's petition for drivers (some of you may remember it from when it was started back in January), and if you haven't signed it yet, please come on over and do. There IS currently a team working on the drivers (not NVIDIA itself, but some people who are getting a bit of help from NVIDIA at least). We will keep you updated on how things go. For those of you wondering about the legal issues, they DID come up, and have been successfully resolved. Please drop by the site to sign the petition and check on how things are going. Cheers, Munish Chopra The FreeBSD NVIDIA Driver Initiative _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sun May 6 18: 4: 2 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mikehan.com (giles.mikehan.com [63.201.69.194]) by hub.freebsd.org (Postfix) with ESMTP id AFC7837B423 for ; Sun, 6 May 2001 18:04:00 -0700 (PDT) (envelope-from mikehan@mikehan.com) Received: (from mikehan@localhost) by mikehan.com (8.11.1/8.11.1) id f4713vV42607; Sun, 6 May 2001 18:03:57 -0700 (PDT) (envelope-from mikehan) Date: Sun, 6 May 2001 18:03:57 -0700 From: Michael Han To: Mike Tancsa Cc: hardware@freebsd.org Subject: Re: Intel 82562 fxp problem Message-ID: <20010506180357.B42149@giles.mikehan.com> References: <20010504140519.A33085@giles.mikehan.com> <20010504142126.U19393@nexus.root.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from mike@sentex.net on Sat, May 05, 2001 at 01:30:56AM -0400 Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, May 05, 2001 at 01:30:56AM -0400, Mike Tancsa wrote: > > Perhaps the patch at > > http://www.freebsd.org/cgi/query-pr.cgi?pr=18757 > > It might not be your issue, but you may want to try it. Hmm, no dice. Problem's still very much there. -- mikehan@mikehan.com http://www.mikehan.com/ coffee achiever San Francisco, California "Closed Mondays." The Walker Art Center To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 4: 4:48 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mail.atm.ox.ac.uk (mail.atm.ox.ac.uk [163.1.242.1]) by hub.freebsd.org (Postfix) with ESMTP id 8758637B423 for ; Mon, 7 May 2001 04:04:45 -0700 (PDT) (envelope-from rhskelto@atm.ox.ac.uk) Received: from homer.atm.ox.ac.uk (IDENT:root@homer.atm.ox.ac.uk [163.1.242.25]) by mail.atm.ox.ac.uk (8.10.0/8.10.0) with ESMTP id f47B4ii03154 for ; Mon, 7 May 2001 12:04:44 +0100 (BST) Received: from localhost (rhskelto@localhost) by homer.atm.ox.ac.uk (8.9.3/8.8.2) with ESMTP id MAA01869 for ; Mon, 7 May 2001 12:04:44 +0100 X-Authentication-Warning: homer.atm.ox.ac.uk: rhskelto owned process doing -bs Date: Mon, 7 May 2001 12:04:42 +0100 (BST) From: Randall Skelton To: freebsd-hardware@freebsd.org Subject: Dropped packets... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi all, I am having a rather strange problem with my network interface in FreeBSD 4.2/4.3. It is an sis900 card which appears to be fully supported and was detected on install. Nothing further has been done to the machine (it is a brand new *vanilla* install of 4.3). The problem almost appears to be the machine being sleepy and failing to reply to network requests until it is rudely awakened. After the machine has been idle for an hour or so (no logins and little activity) the ethernet card fails to respond when a connection is attempted via ssh/ftp/telnet/etc... To 'wake-up' the interface, I must ping the machine from within the subnet and I seem to loose the first packet? (NB: if I ping the machine from outside the subnet I loose all packets) (from within the subnet) PING tulip... (xxx.1.242.xxx): 56 data bytes 64 bytes from xxx.1.242.xxx: icmp_seq=1 ttl=255 time=0.6 ms 64 bytes from xxx.1.242.xxx: icmp_seq=2 ttl=255 time=0.5 ms 64 bytes from xxx.1.242.xxx: icmp_seq=3 ttl=255 time=0.5 ms Note that icmp_seq=0 is lost. Once, the machine 'wakes up' the card appears fine and I can connect to it from outside the subnet. ifconfig gives the following: sis0: flags=8843 mtu 1500 inet xxx.1.242.xxx netmask 0xfffff800 broadcast xxx.1.247.xxx inet6 fe80::240:33ff:feab:fd85%sis0 prefixlen 64 scopeid 0x1 ether 00:40:33:ab:fd:85 media: autoselect (100baseTX ) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP none I am in the process of turning on excessive levels of debugging and I'll post more when I get it. In the meantime, does anyone have any ideas as to what is going on here? Any hints of what I should be looking at? Cheers, Randall To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 4:52:51 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from ns3.tstt.net.tt (ns3.tstt.net.tt [196.3.132.3]) by hub.freebsd.org (Postfix) with SMTP id E1F8037B43C for ; Mon, 7 May 2001 04:52:46 -0700 (PDT) (envelope-from dchulhan@uwi.tt) Received: (qmail 425266 invoked by uid 0); 7 May 2001 11:52:44 -0000 Received: from cuscon4598.tstt.net.tt (HELO uwi.tt) (209.94.221.104) by ns3.tstt.net.tt with SMTP; 7 May 2001 11:52:44 -0000 Message-ID: <3AF68C8A.AEC7C91B@uwi.tt> Date: Mon, 07 May 2001 07:52:43 -0400 From: Dale Chulhan - Home Organization: COSTAATT X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org, freebsd-hardware@freebsd.org Subject: pnp enable troubles.... Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org OK cool fot those of you who care I got my modem to be recognized by the pnp0 controller. I had to use the following line: pnp 1 0 enable os irq0 11 drq0 0 port0 0x3e8 ( which after some frustration was discovered to be typed after you interrupt the regula kernel from booting and type 'boot -c' ) The only problem now is that this 'enabling' does not seem to stick cause I keep getting CSN 1 disabled error when I reeboot. Do I have to retype this EVERYTIME I boot now for my modem to be recognized? And after it's recognized do I have to create anything in /dev? Thank you for your help. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 7:18:18 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from lion.kgv.edu.hk (lion.kgv.edu.hk [152.101.128.1]) by hub.freebsd.org (Postfix) with SMTP id 4107737B422 for ; Mon, 7 May 2001 07:18:15 -0700 (PDT) (envelope-from john@kgv.net) Received: (qmail 92550 invoked from network); 7 May 2001 14:18:02 -0000 Received: from student.kgv.edu.hk (HELO kgv.net) (152.101.128.2) by lion.kgv.edu.hk with SMTP; 7 May 2001 14:18:02 -0000 Date: Mon, 07 May 2001 22:18:02 CST To: Subject: Netatalk with 3Com 3C985 Gigabit cards From: "John Ryan" X-Mailer: TWIG 2.6.2 Reply-To: john@kgv.net Message-Id: <20010507141815.4107737B422@hub.freebsd.org> Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I can't get netatalk to work with 3Com 3C985 Gigabit cards I've installed. They're using the ti driver and TCP/IPv4 is working fine. Any ideas? John Ryan KGV To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 10:39:21 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from hotmail.com (f44.law11.hotmail.com [64.4.17.44]) by hub.freebsd.org (Postfix) with ESMTP id 80CD437B424 for ; Mon, 7 May 2001 10:39:19 -0700 (PDT) (envelope-from radiomaan@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 7 May 2001 10:39:19 -0700 Received: from 151.201.63.130 by lw11fd.law11.hotmail.msn.com with HTTP; Mon, 07 May 2001 17:39:19 GMT X-Originating-IP: [151.201.63.130] From: "Bruce Tepke" To: freebsd-hardware@FreeBSD.ORG Subject: HP Scanjet 5300c Date: Mon, 07 May 2001 17:39:19 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 07 May 2001 17:39:19.0371 (UTC) FILETIME=[A50099B0:01C0D71C] Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have a HP Scanjet 5300c scanner and was wondering if Freebsd has any support for it. Linux thus far seems to not support it and I have been searching for a unix-like system that does. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 12:27:53 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from catastrophe.net (ss189-189.dvsn-chi-il.outlook.net [208.45.189.189]) by hub.freebsd.org (Postfix) with SMTP id E772F37B422 for ; Mon, 7 May 2001 12:27:50 -0700 (PDT) (envelope-from eric@catastrophe.net) Received: (qmail 20538 invoked by uid 1002); 7 May 2001 19:27:48 -0000 Date: Mon, 7 May 2001 14:27:48 -0500 (CDT) From: Reply-To: To: Subject: Slow Writes Message-ID: Organization: http://www.catastrophe.net MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Greetings - I have the following configuration. FreeBSD-4.2 RELEASE Adaptec 2100S 5*36.7GB 10K IBM Drives in a RAID 5 hardware configuration. WHen running bonnie, it appears as though life is rather slow. -------Sequential Output-------- ---Sequential Input-- --Random-- -Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks--- Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU test 100 3950 9.5 3506 3.9 3870 3.6 29625 99.6 258067 98.0 31448.5 99.7 any ideas? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon May 7 16: 8:56 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mailfarm.ipfnet.net (mailfarm.ipfnet.net [195.211.129.222]) by hub.freebsd.org (Postfix) with ESMTP id 5FFBD37B422 for ; Mon, 7 May 2001 16:08:49 -0700 (PDT) (envelope-from ml-freebsd-hardware@phobgate.de) Received: from [192.168.2.94] (router-195-211-129.ipfnet.net [195.211.129.1]) (authenticated as bsd@phobgate.de) by mailfarm.ipfnet.net (8.11.1/8.10.1) with ESMTP id f47N8mW84955 for ; Tue, 8 May 2001 01:08:48 +0200 (CEST) Date: Tue, 08 May 2001 01:08:48 +0200 From: alex Reply-To: alex To: freebsd-hardware@freebsd.org Subject: Gigabyte GA-7ZXR with onboard Promise IDE RAID 0+1 Controller - booting FreeBSD-4.2 from mirrored Array Message-ID: <1441650205.989284128@[192.168.2.94]> X-Mailer: Mulberry/2.0.8 (Win32) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org hi there, I have a Gigabyte GA-7ZXR with the onboard Promise IDE ATA100 RAID Controller (supports RAID 0 and 1, single / mixed). I installed FreeBSD 4.2 release on a RAID 1 (mirroring) and rebooted. No problems so far. But when I power off and remove one disk, FreeBSD stops while booting missing /dev/ar0 (I installed on /dev/ar0s1a, b, e, f -> RAID Array) with the following message: can't stat /dev/ar0s1a: No such file or directory any ideas? On the other side, while installing / partitioning the disk I had /dev/ad4 and /dev/ad6 as options too for partitioning, not only /dev/ar0 ...?? This makes me wondering, does FreeBSD see them as an Array and additionally as 2 single disks? When i think about this, does FreeBSD recongnise a broken Array as a 'standalone disk' (no array, just the disk itself) instead 'this disk is part of array which is just not complete'..? when using mirroring, this shouldn't be handled this way, i think. in my opinion mirroring means, the still systems runs, even with only one disk. or am i wrong? maybe at the time 4.2 was released, there was no support for booting a broken mirrored array. if it's now, then please tell and forgive me :) I was looking for documentation for this Promise Controller under FreeBSD but didn't find something usefull about support of Arrays under FreeBSD (stripe / mirror), that's why i ask you. hope you can help me, thanks in advance. if you need more informations, tell me. alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue May 8 4:25:11 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from moo.sysabend.org (moo.sysabend.org [63.86.88.201]) by hub.freebsd.org (Postfix) with ESMTP id 10A6A37B423 for ; Tue, 8 May 2001 04:25:08 -0700 (PDT) (envelope-from ragnar@sysabend.org) Received: by moo.sysabend.org (Postfix, from userid 1004) id 9903F75A2; Tue, 8 May 2001 04:25:40 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id 87D991D98; Tue, 8 May 2001 04:25:40 -0700 (PDT) Date: Tue, 8 May 2001 04:25:40 -0700 (PDT) From: Jamie Bowden To: Bruce Tepke Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: HP Scanjet 5300c In-Reply-To: Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 7 May 2001, Bruce Tepke wrote: :I have a HP Scanjet 5300c scanner and was wondering if Freebsd has any :support for it. Linux thus far seems to not support it and I have been :searching for a unix-like system that does. I was able to use my 6200c with hpscan from the ports. You may have to create a /dev/ptX device node to access it. Jamie Bowden -- "It was half way to Rivendell when the drugs began to take hold" Hunter S Tolkien "Fear and Loathing in Barad Dur" Iain Bowen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue May 8 14:53:38 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from nanguo.chalmers.com.au (gateway.chalmers.com.au [203.1.96.1]) by hub.freebsd.org (Postfix) with ESMTP id C73DC37B423 for ; Tue, 8 May 2001 14:53:32 -0700 (PDT) (envelope-from robert@chalmers.com.au) Received: from carbon (carbon.chalmers.com.au [203.1.96.26]) by nanguo.chalmers.com.au (8.11.0/8.11.0) with SMTP id f48Lw8e13322 for ; Wed, 9 May 2001 07:58:12 +1000 (EST) From: "Robert" To: Subject: Does anyone know what this error message is from? Date: Wed, 9 May 2001 07:56:39 +1000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Can't for the life of me see whare this is coming from. Does anyone here know? thanks Robert kernel log messages: > Limiting closed port RST response from 283 to 200 packets per second > Limiting closed port RST response from 338 to 200 packets per second > Limiting closed port RST response from 383 to 200 packets per second > Limiting closed port RST response from 419 to 200 packets per second > Limiting closed port RST response from 449 to 200 packets per second > Limiting closed port RST response from 341 to 200 packets per second > Limiting closed port RST response from 323 to 200 packets per second To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue May 8 17:56:59 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from swan.mail.pas.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 9B2EB37B42C for ; Tue, 8 May 2001 17:56:53 -0700 (PDT) (envelope-from lists@vivdev.com) Received: from [192.168.1.100] (dhcp043-10-151-24.nt01-c5.cpe.charter-ne.com [24.151.10.43]) by swan.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id RAA12233 for ; Tue, 8 May 2001 17:56:51 -0700 (PDT) X-Sender: lists@vivdev.com (Unverified) Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Tue, 8 May 2001 20:53:04 -0400 To: freebsd-hardware@FreeBSD.ORG From: lists Subject: Compaq Presario 486sx Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Just picked up a 66 mhz compaq presario 486sx to boot from floppy. Currently has win95 on it. Any advice or warnings? Anything peculiar about loading freebsd on this type of machine? Thanks alot! thanks, chris lists@vivdev.com _____________________________________________ /"\ ASCII Ribbon campaign against E-Mail \ / in gratuitous HTML and Microsoft X proprietary formats. / \ Post no attachments to the lists! _______________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue May 8 18:51:24 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mailfarm.ipfnet.net (mailfarm.ipfnet.net [195.211.129.222]) by hub.freebsd.org (Postfix) with ESMTP id 4DEEA37B42C for ; Tue, 8 May 2001 18:51:21 -0700 (PDT) (envelope-from ab@ipfnet.net) Received: from [192.168.2.94] (router-195-211-129.ipfnet.net [195.211.129.1]) (authenticated as ab@ipfnet.net) by mailfarm.ipfnet.net (8.11.1/8.10.1) with ESMTP id f491o3W91481; Wed, 9 May 2001 03:50:03 +0200 (CEST) Date: Wed, 09 May 2001 03:50:03 +0200 From: Alexander Bilz Reply-To: Alexander Bilz To: Robert , freebsd-hardware@freebsd.org Subject: Re: Does anyone know what this error message is from? Message-ID: <1537725249.989380203@[192.168.2.94]> In-Reply-To: X-Mailer: Mulberry/2.0.8 (Win32) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org i think that means something like this: http://www.freebsd.org/doc/en_US.ISO_8859-1/books/faq/networking.html#ICMP- RESPONSE-BW-LIMIT i had a lot of "icmp-response bandwidth limit xxx/yyy pps" messages in my logs when a freebsd 4.2 box was flooded. maybe your box was flooded too? --On Mittwoch, 9. Mai 2001 07:56 +1000 Robert wrote: > > Can't for the life of me see whare this is coming from. Does anyone here > know? > > thanks > Robert > > kernel log messages: >> Limiting closed port RST response from 283 to 200 packets per second >> Limiting closed port RST response from 338 to 200 packets per second >> Limiting closed port RST response from 383 to 200 packets per second >> Limiting closed port RST response from 419 to 200 packets per second >> Limiting closed port RST response from 449 to 200 packets per second >> Limiting closed port RST response from 341 to 200 packets per second >> Limiting closed port RST response from 323 to 200 packets per second > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message \\\\//// ( oo ) ***************oOOo**(__)**oOOo************************ * Alexander Bilz email: ab@ipfnet.net * * IPFNET GmbH web: http://www.ipfnet.net/ * * Brueckenstrasse 22 voice: +49 911 72301 0 * * D-90768 Fuerth fax: +49 911 72301 28 * ******************************************************* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue May 8 20:30: 8 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from chintmg9.corp.quakeroats.com (chifw.quakeroats.com [207.122.210.101]) by hub.freebsd.org (Postfix) with ESMTP id 25A9937B423 for ; Tue, 8 May 2001 20:30:06 -0700 (PDT) (envelope-from Scott_Thompson@quakeroats.com) Received: by chintmg9.corp.quakeroats.com with Internet Mail Service (5.5.2653.19) id ; Tue, 8 May 2001 22:33:02 -0500 Message-ID: From: "Thompson, Scott" To: 'lists' , freebsd-hardware@FreeBSD.ORG Subject: RE: Compaq Presario 486sx Date: Tue, 8 May 2001 22:33:01 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org i have an old deskpro 486 which works fine and a newer presario with a pentium 166. the bios on the presario will only boot from a disk with dos on it. that is how it determines which disk to boot from (and i thought windoze was dumb). you may need to install dos on a small sacrificial partition (wish i had the diskettes) or boot from a live file system cd, interrupt the boot and change active kernels on the fly. the second choice is not an option if your box will not boot from cd, but if it does not, it may be using an older bios. i do the kernel swap since i did not realize i had this problem when i dedicated my whole drive to freebsd. if you encounter this problem, i can send you the specifics of the kernel swapping procedure. be sure you know the name of your root slice (you will need it). since i will only need to boot my machine if the ups runs down, the awkward boot is not a problem. your mileage may vary. also, if i were you, i would throw an overdrive processor in there if possible so you have floating point support and a little more horsepower. my 486's are now all 66mhz overdrives or better. it helps. also, i would want at least 16meg of memory in there, though i have installed and run with 8 using 3.2 release. -----Original Message----- From: lists [mailto:lists@vivdev.com] Sent: Tuesday, May 08, 2001 7:53 PM To: freebsd-hardware@FreeBSD.ORG Subject: Compaq Presario 486sx Just picked up a 66 mhz compaq presario 486sx to boot from floppy. Currently has win95 on it. Any advice or warnings? Anything peculiar about loading freebsd on this type of machine? Thanks alot! thanks, chris lists@vivdev.com _____________________________________________ /"\ ASCII Ribbon campaign against E-Mail \ / in gratuitous HTML and Microsoft X proprietary formats. / \ Post no attachments to the lists! _______________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed May 9 20:16: 9 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mikehan.com (giles.mikehan.com [63.201.69.194]) by hub.freebsd.org (Postfix) with ESMTP id B4E6137B422 for ; Wed, 9 May 2001 20:16:06 -0700 (PDT) (envelope-from mikehan@mikehan.com) Received: (from mikehan@localhost) by mikehan.com (8.11.1/8.11.1) id f4A3G1C49369 for hardware@freebsd.org; Wed, 9 May 2001 20:16:01 -0700 (PDT) (envelope-from mikehan) Date: Wed, 9 May 2001 20:16:01 -0700 From: Michael Han To: hardware@freebsd.org Subject: Intel 815EEA board bad? Message-ID: <20010509201601.B49257@giles.mikehan.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I recently reported[1] a problem with the fxp driver giving "SCB timeout" errors and dropping off of the network temporarily or permanently. I finally managed to get a serial console attached and can do a little more investigation, but lo and behold, the box spontaneously panicked on me, giving a "Fatal trap 10" panic for "panic: trace trap". I see that the only other instance I can find of this panic being reported[2] is, surprise-surprise, on a box with an Intel 815EEA motherboard. Research into the first problem indicates that similar problems are being reported on FreeBSD, OpenBSD and Linux, primarily on Intel 815E-chipset systems. Which brings me to my question -- is the Intel 815EEA board or Intel 815E chipset just bad news? I'd be sad to hear it, given that my friend and I just bought a box based on it, but there are at least two reported problems that appear to be linked to this hardware. If anyone's interested in investigating the problems, I've enabled crash dumps to be able to provide a full stack from the kernel in the event that the machine panicks again, and I'm willing to invest some effort into the problem with fxp. I'm not sure how long I can hold off my friend, who wants to install Debian instead -- though I suspect we'll find similar problems there. Is it possible this is just hardware errata? [1] http://docs.freebsd.org/cgi/getmsg.cgi?fetch=15827+0+archive/2001/freebsd-hardware/20010506.freebsd-hardware [2] http://docs.freebsd.org/cgi/getmsg.cgi?fetch=612074+0+archive/2000/freebsd-stable/20001224.freebsd-stable -- mikehan@mikehan.com http://www.mikehan.com/ coffee achiever San Francisco, California "And, just like it should in all stories about philosophers, it ended up in complete chaos." - Richard P. Feynman To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed May 9 23:33:12 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from hotmail.com (f43.law7.hotmail.com [216.33.237.43]) by hub.freebsd.org (Postfix) with ESMTP id A6D6437B423; Wed, 9 May 2001 23:33:08 -0700 (PDT) (envelope-from paragdabke@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 9 May 2001 23:33:08 -0700 Received: from 203.199.84.130 by lw7fd.law7.hotmail.msn.com with HTTP; Thu, 10 May 2001 06:33:08 GMT X-Originating-IP: [203.199.84.130] From: "Parag Dabke" To: hardware@FreeBSD.org, freebsd-small@FreeBSD.ORG Subject: Please delete mail with subject 'Homepage' Date: Thu, 10 May 2001 12:03:08 +0530 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 10 May 2001 06:33:08.0571 (UTC) FILETIME=[13C9CAB0:01C0D91B] Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi All, If you receive mail with subject 'Homepage' from me (Parag Dabke - paragd@bsil.com) then please delete it. It has attachment named homepage.HTML.vbs. It is a virus. I received this virus from list 'questions'. Is it possible to have virus check for the mailing lists. Sorry for the trouble. Regards, Parag _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed May 9 23:48:58 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from akira.lanfear.com (akira.lanfear.com [208.12.11.174]) by hub.freebsd.org (Postfix) with ESMTP id 6715D37B422; Wed, 9 May 2001 23:48:53 -0700 (PDT) (envelope-from mwlist@lanfear.com) Received: from akira (h-64-105-36-216.snvacaid.covad.net [64.105.36.216]) by akira.lanfear.com (8.9.3/8.9.3) with SMTP id XAA89153; Wed, 9 May 2001 23:48:52 -0700 (PDT) (envelope-from mwlist@lanfear.com) Date: Wed, 9 May 2001 23:48:52 -0700 (PDT) From: Marc W Message-Id: <200105100648.XAA89153@akira.lanfear.com> To: "FreeBSD Questions" Cc: freebsd-hardware@freebsd.org Subject: Reasonably priced RAID 1 in a 1U server? MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Mailer: Kiltdown 0.7 Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org hello! in the near future, i'm going to need to put together a 1U server for running a FreeBSD server system. One of the things I would like it to have a RAID 1 support, set up in such a way that if a disk fails, the system can keep running with the other. Ideally, the fix for a bad disk would simply be to put in another disk and reboot and be back. My main goal is complete duplication of the data, and as simple a replacement as possible. The question is: just what fits in a 1U server -- I'm a little new to these, and don't want to buy a controller that's not going to work when i get the computer. Any suggestions for what I might want to set up here? any recommendations for 1U servers that I might want to consider for maximal FreeBSD compatibility also?? thanks! marc. Marc W, San Francisco, CA Kiltdown -- a free email client for X www.kiltdown.org -- it's what's underneath that counts. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu May 10 4:20:13 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from news.IAEhv.nl (news.iae.nl [212.61.26.37]) by hub.freebsd.org (Postfix) with ESMTP id 235FD37B422 for ; Thu, 10 May 2001 04:20:10 -0700 (PDT) (envelope-from marc@bowtie.nl) Received: (from uucp@localhost) by news.IAEhv.nl (8.9.1/8.9.1) with IAEhv.nl id NAA06606 for hardware@freebsd.org; Thu, 10 May 2001 13:20:07 +0200 (MET DST) Received: from bowtie.nl (nietzsche.intra.bowtie.nl [192.168.4.16]) by bowtie.nl (8.11.1/8.11.1) with ESMTP id f4ABH1p60279; Thu, 10 May 2001 13:17:02 +0200 (CEST) (envelope-from marc@bowtie.nl) Message-ID: <3AFA78AD.F76DD073@bowtie.nl> Date: Thu, 10 May 2001 13:17:01 +0200 From: Marc van Kempen Organization: BowTie Technology X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: hardware@freebsd.org Subject: Dell Poweredge 300sc Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm wondering if this machine will work with FreeBSD, is anyone using it? Regards, Marc. PS. Please include me directly in replies, since I'm not on the list. -- ---------------------------------------------------- Marc van Kempen BowTie Technology Raiffeisenstraat 7 5611 CH Eindhoven tel. +31 40 2 64 98 60 mailto:marc@bowtie.nl fax. +31 40 2 64 98 61 http://www.bowtie.nl ---------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu May 10 21:27:15 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id CF36237B43F for ; Thu, 10 May 2001 21:27:12 -0700 (PDT) (envelope-from mike@sentex.net) Received: from chimp.simianscience.com (cage.simianscience.com [64.7.134.1]) by smtp1.sentex.ca (8.11.2/8.11.1) with SMTP id f4B4R5V02378; Fri, 11 May 2001 00:27:05 -0400 (EDT) (envelope-from mike@sentex.net) From: Mike Tancsa To: mwlist@lanfear.com (Marc W) Cc: hardware@freebsd.org Subject: Re: Reasonably priced RAID 1 in a 1U server? Date: Fri, 11 May 2001 00:27:04 -0400 Message-ID: References: In-Reply-To: X-Mailer: Forte Agent 1.8/32.548 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 10 May 2001 02:49:05 -0400, in sentex.lists.freebsd.hardware you = wrote: > > >hello! > > in the near future, i'm going to need to put together a 1U server >for running a FreeBSD server system. One of the things I would like it >to have a RAID 1 support, set up in such a way that if a disk fails, www.3ware.com. They make great 2 drive RAID controllers and the drivers and management software are excellent on FreeBSD. A good idea are some hard drive trays as well. You can get them for $20. Dont bother with = "hot swap trays"... The "cold swap" trays are great. About $20. ---Mike Mike Tancsa (mdtancsa@sentex.net) =09 Sentex Communications Corp, =09 Waterloo, Ontario, Canada "Given enough time, 100 monkeys on 100 routers=20 could setup a national IP network." (KDW2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 1:20: 8 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from l04.research.kpn.com (l04.research.kpn.com [139.63.192.204]) by hub.freebsd.org (Postfix) with ESMTP id CE47B37B423 for ; Fri, 11 May 2001 01:20:05 -0700 (PDT) (envelope-from K.J.Koster@kpn.com) Received: by l04.research.kpn.com with Internet Mail Service (5.5.2653.19) id ; Fri, 11 May 2001 10:20:04 +0100 Message-ID: <59063B5B4D98D311BC0D0001FA7E452205FD9BB7@l04.research.kpn.com> From: "Koster, K.J." To: "'Thompson, Scott'" , 'lists' Cc: freebsd-hardware@FreeBSD.ORG Subject: RE: Compaq Presario 486sx Date: Fri, 11 May 2001 10:20:04 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Dear All, > > i have an old deskpro 486 which works fine and a newer presario with a > pentium 166. the bios on the presario will only boot from a > disk with dos > on it. that is how it determines which disk to boot from > (and i thought > windoze was dumb). you may need to install dos on a small > sacrificial > partition (wish i had the diskettes) or boot from a live file > system cd, > interrupt the boot and change active kernels on the fly. > Alternately you could install the disk in another machines, load FreeBSD and then put the disk back into the presario. In my deskpro the video card (Matrox) is not supported by XFree86, due to Compaq using non-standard addresses. But then, who's going to run X11 on a 486 nowadays? :-) Kees Jan ================================================ You are only young once, but you can stay immature all your life. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 12:58:37 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from krell.webweaver.net (krell.webweaver.net [64.124.90.11]) by hub.freebsd.org (Postfix) with ESMTP id 9E38B37B424 for ; Fri, 11 May 2001 12:58:33 -0700 (PDT) (envelope-from nicole@unixgirl.com) Received: from xwin.nmhtech.com (xwin.daemontech.net [208.135.51.161]) by krell.webweaver.net (Postfix) with ESMTP id 0921920F13; Fri, 11 May 2001 12:58:28 -0700 (PDT) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Fri, 11 May 2001 12:58:25 -0700 (PDT) From: Hodge Podge To: Mike Tancsa Subject: Re: Reasonably priced RAID 1 in a 1U server? Cc: hardware@freebsd.org, (Marc W) Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Is there a good working version of the RAID management software around for the 3ware stuff? I really like it and find it very fast, but I sure wish I had the management tools for it. The ones I can find on Mike Smiths page don't seem to work :( Nicole On 11-May-01 Mike Tancsa wrote: > On 10 May 2001 02:49:05 -0400, in sentex.lists.freebsd.hardware you wrote: > >> >> >>hello! >> >> in the near future, i'm going to need to put together a 1U server >>for running a FreeBSD server system. One of the things I would like it >>to have a RAID 1 support, set up in such a way that if a disk fails, > > > www.3ware.com. They make great 2 drive RAID controllers and the drivers > and management software are excellent on FreeBSD. A good idea are some > hard drive trays as well. You can get them for $20. Dont bother with "hot > swap trays"... The "cold swap" trays are great. About $20. > > ---Mike > Mike Tancsa (mdtancsa@sentex.net) > Sentex Communications Corp, > Waterloo, Ontario, Canada > "Given enough time, 100 monkeys on 100 routers > could setup a national IP network." (KDW2) > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message ******* |\ __ /| (`\ ******* * * | o_o |__ ) ) * * * * // \\ * * * Nicole Harrington | AKA Hodge Podge * ----------------------(((---(((-------------------------------- nicole@unixgirl.com http://www.unixgirl.com/ webmistress@dangermouse.org http://www.dangermouse.org/ nicole@deviantimages.com http://www.deviantimages.com/ -- Powered By Coca-Cola and FreeBSD -- -- Why do doctors call what they do practice? -- -- The Best Place for Your Web Site - www.Kinkyhosting.com -- ---------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 13:36:53 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from portnoy.lbl.gov (portnoy.lbl.gov [131.243.2.11]) by hub.freebsd.org (Postfix) with ESMTP id 6687F37B423 for ; Fri, 11 May 2001 13:36:50 -0700 (PDT) (envelope-from jin@portnoy.lbl.gov) Received: (from jin@localhost) by portnoy.lbl.gov (8.11.1/8.11.1) id f4BKahc13121 for hardware@freebsd.org; Fri, 11 May 2001 13:36:43 -0700 (PDT) Date: Fri, 11 May 2001 13:36:43 -0700 (PDT) From: Jin Guojun (DSD staff) Message-Id: <200105112036.f4BKahc13121@portnoy.lbl.gov> To: hardware@freebsd.org Subject: SONY PCG-Z505SX laptop Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Two question on this laptop: (running FreeBSD 4.3) (1) Does this hardware support APM? There is no clear document for apm. The kernel configuration has "device apm"compiled, but when I run apm, the kernel says: apm: can't open /dev/apm: Device not configured (2) WaveLan does not reliably work on this hardware. Sometime the FreeBSD kernel found wi, but sometimes did not, and sometimes it would be found a while after system is up (login propmt shown), and sometimes syetem spits out following message: wi0: at port 0x240-0x27f irq 3 slot 0 on pccard0 wi0: Ethernet address: 00:60:1d:03:68:eb wi0: tx buffer allocation failed wi0: xmit failed wi0: device timeout Is this PCG-Z505SX PCCARD problem or the WaveLan problem? Unplug WaveLan card will definitly hang the system :-( Thanks for any input, -Jin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 14:15:40 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id 0A98537B423 for ; Fri, 11 May 2001 14:15:36 -0700 (PDT) (envelope-from mike@sentex.net) Received: from simoeon.sentex.net (simeon.sentex.ca [209.112.4.47]) by smtp1.sentex.ca (8.11.2/8.11.1) with ESMTP id f4BLFXl35648; Fri, 11 May 2001 17:15:33 -0400 (EDT) (envelope-from mike@sentex.net) Message-Id: <5.1.0.14.0.20010511170845.030dc0e0@marble.sentex.ca> X-Sender: mdtpop@marble.sentex.ca X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 11 May 2001 17:09:28 -0400 To: Hodge Podge From: Mike Tancsa Subject: Re: Reasonably priced RAID 1 in a 1U server? Cc: hardware@freebsd.org, (Marc W) In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org What doesnt work about it ? Did you create the devices before starting the management program ? cd /dev sh MAKEDEV twe0 sh MAKEDEV twed0 /usr/local/sbin/3dmd ---Mike At 12:58 PM 5/11/01 -0700, Hodge Podge wrote: > Is there a good working version of the RAID management software around for >the 3ware stuff? I really like it and find it very fast, but I sure wish >I had >the management tools for it. > > The ones I can find on Mike Smiths page don't seem to work :( > > > > Nicole > > > > >On 11-May-01 Mike Tancsa wrote: > > On 10 May 2001 02:49:05 -0400, in sentex.lists.freebsd.hardware you wrote: > > > >> > >> > >>hello! > >> > >> in the near future, i'm going to need to put together a 1U server > >>for running a FreeBSD server system. One of the things I would like it > >>to have a RAID 1 support, set up in such a way that if a disk fails, > > > > > > www.3ware.com. They make great 2 drive RAID controllers and the drivers > > and management software are excellent on FreeBSD. A good idea are some > > hard drive trays as well. You can get them for $20. Dont bother with "hot > > swap trays"... The "cold swap" trays are great. About $20. > > > > ---Mike > > Mike Tancsa (mdtancsa@sentex.net) > > Sentex Communications Corp, > > Waterloo, Ontario, Canada > > "Given enough time, 100 monkeys on 100 routers > > could setup a national IP network." (KDW2) > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-hardware" in the body of the message > > > >******* |\ __ /| (`\ ******* > * * | o_o |__ ) ) * * > * * // \\ * * > * Nicole Harrington | AKA Hodge Podge * >----------------------(((---(((-------------------------------- > nicole@unixgirl.com http://www.unixgirl.com/ > webmistress@dangermouse.org http://www.dangermouse.org/ > nicole@deviantimages.com http://www.deviantimages.com/ > > -- Powered By Coca-Cola and FreeBSD -- > -- Why do doctors call what they do practice? -- > -- The Best Place for Your Web Site - www.Kinkyhosting.com -- > >---------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 15: 7:54 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from rhymer.cogsci.ed.ac.uk (rhymer.cogsci.ed.ac.uk [129.215.144.8]) by hub.freebsd.org (Postfix) with ESMTP id 16A2237B424 for ; Fri, 11 May 2001 15:07:51 -0700 (PDT) (envelope-from richard@cogsci.ed.ac.uk) Received: from banks.cogsci.ed.ac.uk (banks [129.215.144.55]) by rhymer.cogsci.ed.ac.uk (8.9.3/8.9.3) with ESMTP id XAA03235; Fri, 11 May 2001 23:07:48 +0100 (BST) Received: (from richard@localhost) by banks.cogsci.ed.ac.uk (8.9.3+Sun/8.9.3) id XAA22815; Fri, 11 May 2001 23:07:48 +0100 (BST) Date: Fri, 11 May 2001 23:07:48 +0100 (BST) Message-Id: <200105112207.XAA22815@banks.cogsci.ed.ac.uk> From: Richard Tobin Subject: Re: SONY PCG-Z505SX laptop To: Jin Guojun (DSD staff) , hardware@FreeBSD.ORG In-Reply-To: DSD staff's message of Fri, 11 May 2001 13:36:43 -0700 (PDT) Organization: just say no Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > apm: can't open /dev/apm: Device not configured The generic kernel has device apm0 at nexus? disable flags 0x20 Note "disable". Have you removed that (or enabled it from the kernel configuration at boot time)? -- Richard To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 15:16:12 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from portnoy.lbl.gov (portnoy.lbl.gov [131.243.2.11]) by hub.freebsd.org (Postfix) with ESMTP id 5572137B423 for ; Fri, 11 May 2001 15:16:11 -0700 (PDT) (envelope-from jin@portnoy.lbl.gov) Received: (from jin@localhost) by portnoy.lbl.gov (8.11.1/8.11.1) id f4BMG4a17452; Fri, 11 May 2001 15:16:04 -0700 (PDT) Date: Fri, 11 May 2001 15:16:04 -0700 (PDT) From: Jin Guojun (DSD staff) Message-Id: <200105112216.f4BMG4a17452@portnoy.lbl.gov> To: hardware@FreeBSD.ORG, richard@cogsci.ed.ac.uk Subject: Re: SONY PCG-Z505SX laptop Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > apm: can't open /dev/apm: Device not configured > > The generic kernel has > > device apm0 at nexus? disable flags 0x20 > > Note "disable". Have you removed that (or enabled it from the > kernel configuration at boot time)? That is. It is confusing part. LINT says: " ... # Notes on APM # The flags takes the following meaning for apm0: # 0x0020 Statclock is broken. ... So, this makes "disable flags 0x20" like one option -- to disable the flag 0x20. Thanks, -Jin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 15:46:52 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from krell.webweaver.net (krell.webweaver.net [64.124.90.11]) by hub.freebsd.org (Postfix) with ESMTP id DF78C37B43C for ; Fri, 11 May 2001 15:46:47 -0700 (PDT) (envelope-from nicole@unixgirl.com) Received: from xwin.nmhtech.com (xwin.daemontech.net [208.135.51.161]) by krell.webweaver.net (Postfix) with ESMTP id C438320F13; Fri, 11 May 2001 15:46:46 -0700 (PDT) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <5.1.0.14.0.20010511170845.030dc0e0@marble.sentex.ca> Date: Fri, 11 May 2001 15:46:45 -0700 (PDT) From: Hodge Podge To: Mike Tancsa Subject: Re: Reasonably priced RAID 1 in a 1U server? Cc: (Marc W) , hardware@freebsd.org Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 11-May-01 Mike Tancsa wrote: > > What doesnt work about it ? Did you create the devices before starting the > management program ? > > > cd /dev > sh MAKEDEV twe0 > sh MAKEDEV twed0 > > > /usr/local/sbin/3dmd > > ---Mike > AH HA Adding the MAKEDEV twe0 did the trick! Thanks!! However I cant seem to find the docs on how to change the password or what the default password is :( Nicole > > At 12:58 PM 5/11/01 -0700, Hodge Podge wrote: > >> Is there a good working version of the RAID management software around for >>the 3ware stuff? I really like it and find it very fast, but I sure wish >>I had >>the management tools for it. >> >> The ones I can find on Mike Smiths page don't seem to work :( >> >> >> >> Nicole >> >> >> >> >>On 11-May-01 Mike Tancsa wrote: >> > On 10 May 2001 02:49:05 -0400, in sentex.lists.freebsd.hardware you wrote: >> > >> >> >> >> >> >>hello! >> >> >> >> in the near future, i'm going to need to put together a 1U server >> >>for running a FreeBSD server system. One of the things I would like it >> >>to have a RAID 1 support, set up in such a way that if a disk fails, >> > >> > >> > www.3ware.com. They make great 2 drive RAID controllers and the drivers >> > and management software are excellent on FreeBSD. A good idea are some >> > hard drive trays as well. You can get them for $20. Dont bother with "hot >> > swap trays"... The "cold swap" trays are great. About $20. >> > >> > ---Mike >> > Mike Tancsa (mdtancsa@sentex.net) >> > Sentex Communications Corp, >> > Waterloo, Ontario, Canada >> > "Given enough time, 100 monkeys on 100 routers >> > could setup a national IP network." (KDW2) >> > >> > To Unsubscribe: send mail to majordomo@FreeBSD.org >> > with "unsubscribe freebsd-hardware" in the body of the message >> >> >> >>******* |\ __ /| (`\ ******* >> * * | o_o |__ ) ) * * >> * * // \\ * * >> * Nicole Harrington | AKA Hodge Podge * >>----------------------(((---(((-------------------------------- >> nicole@unixgirl.com http://www.unixgirl.com/ >> webmistress@dangermouse.org http://www.dangermouse.org/ >> nicole@deviantimages.com http://www.deviantimages.com/ >> >> -- Powered By Coca-Cola and FreeBSD -- >> -- Why do doctors call what they do practice? -- >> -- The Best Place for Your Web Site - www.Kinkyhosting.com -- >> >>---------------------------------------------------------------- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message ******* |\ __ /| (`\ ******* * * | o_o |__ ) ) * * * * // \\ * * * Nicole Harrington | AKA Hodge Podge * ----------------------(((---(((-------------------------------- nicole@unixgirl.com http://www.unixgirl.com/ webmistress@dangermouse.org http://www.dangermouse.org/ nicole@deviantimages.com http://www.deviantimages.com/ -- Powered By Coca-Cola and FreeBSD -- -- Why do doctors call what they do practice? -- -- The Best Place for Your Web Site - www.Kinkyhosting.com -- ---------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 15:48: 1 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 104D637B423 for ; Fri, 11 May 2001 15:47:59 -0700 (PDT) (envelope-from oberman@ptavv.es.net) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id f4BMlwc13637; Fri, 11 May 2001 15:47:58 -0700 (PDT) Message-Id: <200105112247.f4BMlwc13637@ptavv.es.net> To: Jin Guojun (DSD staff) Cc: hardware@FreeBSD.ORG, richard@cogsci.ed.ac.uk Subject: Re: SONY PCG-Z505SX laptop In-reply-to: Your message of "Fri, 11 May 2001 15:16:04 PDT." <200105112216.f4BMG4a17452@portnoy.lbl.gov> Date: Fri, 11 May 2001 15:47:58 -0700 From: "Kevin Oberman" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Date: Fri, 11 May 2001 15:16:04 -0700 (PDT) > From: Jin Guojun (DSD staff) > Sender: owner-freebsd-hardware@FreeBSD.ORG > > > > apm: can't open /dev/apm: Device not configured > > > > The generic kernel has > > > > device apm0 at nexus? disable flags 0x20 > > > > Note "disable". Have you removed that (or enabled it from the > > kernel configuration at boot time)? > > That is. It is confusing part. LINT says: " > ... > # Notes on APM > # The flags takes the following meaning for apm0: > # 0x0020 Statclock is broken. > ... > > So, this makes "disable flags 0x20" like one option -- to disable > the flag 0x20. No. 'disable' means to disable the device, but to build the driver into the kernel so that it can be enabled at boot time without a kernel build. 'flag 0x20' is a separate thing and is in GENERIC as it is more likely to work everywhere. But, on most systems this flag may be removed. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 16: 1: 6 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from usa.com (ti34a80-0703.bb.online.no [148.122.10.190]) by hub.freebsd.org (Postfix) with SMTP id 2FB2E37B423 for ; Fri, 11 May 2001 16:01:04 -0700 (PDT) (envelope-from tv-career@usa.com) From: "Tony Hammer" To: Subject: Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Date: Sat, 12 May 2001 01:02:31 +0200 Reply-To: "Tony Hammer" Content-Transfer-Encoding: 8bit Message-Id: <20010511230104.2FB2E37B423@hub.freebsd.org> Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 16:10: 9 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from krell.webweaver.net (krell.webweaver.net [64.124.90.11]) by hub.freebsd.org (Postfix) with ESMTP id 3BB9537B423 for ; Fri, 11 May 2001 16:10:00 -0700 (PDT) (envelope-from nicole@unixgirl.com) Received: from xwin.nmhtech.com (xwin.daemontech.net [208.135.51.161]) by krell.webweaver.net (Postfix) with ESMTP id EF4A520F13; Fri, 11 May 2001 16:09:59 -0700 (PDT) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Fri, 11 May 2001 16:09:58 -0700 (PDT) From: Hodge Podge To: Hodge Podge Subject: Re: Reasonably priced RAID 1 in a 1U server? Cc: hardware@freebsd.org, (Marc W) , Mike Tancsa Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 11-May-01 Hodge Podge wrote: > > AH HA Adding the MAKEDEV twe0 did the trick! Thanks!! > > However I cant seem to find the docs on how to change the password or what > the > default password is :( > Hate answering my own post... but DUH!.. I found it! Nicole > > > Nicole > > > > >> >> At 12:58 PM 5/11/01 -0700, Hodge Podge wrote: >> >>> Is there a good working version of the RAID management software around for >>>the 3ware stuff? I really like it and find it very fast, but I sure wish >>>I had >>>the management tools for it. >>> >>> The ones I can find on Mike Smiths page don't seem to work :( >>> >>> >>> >>> Nicole >>> >>> >>> >>> >>>On 11-May-01 Mike Tancsa wrote: >>> > On 10 May 2001 02:49:05 -0400, in sentex.lists.freebsd.hardware you >>> > wrote: >>> > >>> >> >>> >> >>> >>hello! >>> >> >>> >> in the near future, i'm going to need to put together a 1U server >>> >>for running a FreeBSD server system. One of the things I would like it >>> >>to have a RAID 1 support, set up in such a way that if a disk fails, >>> > >>> > >>> > www.3ware.com. They make great 2 drive RAID controllers and the drivers >>> > and management software are excellent on FreeBSD. A good idea are some >>> > hard drive trays as well. You can get them for $20. Dont bother with >>> > "hot >>> > swap trays"... The "cold swap" trays are great. About $20. >>> > >>> > ---Mike >>> > Mike Tancsa (mdtancsa@sentex.net) >>> > Sentex Communications Corp, >>> > Waterloo, Ontario, Canada >>> > "Given enough time, 100 monkeys on 100 routers >>> > could setup a national IP network." (KDW2) >>> > >>> > To Unsubscribe: send mail to majordomo@FreeBSD.org >>> > with "unsubscribe freebsd-hardware" in the body of the message >>> >>> >>> >>>******* |\ __ /| (`\ ******* >>> * * | o_o |__ ) ) * * >>> * * // \\ * * >>> * Nicole Harrington | AKA Hodge Podge * >>>----------------------(((---(((-------------------------------- >>> nicole@unixgirl.com http://www.unixgirl.com/ >>> webmistress@dangermouse.org http://www.dangermouse.org/ >>> nicole@deviantimages.com http://www.deviantimages.com/ >>> >>> -- Powered By Coca-Cola and FreeBSD -- >>> -- Why do doctors call what they do practice? -- >>> -- The Best Place for Your Web Site - www.Kinkyhosting.com -- >>> >>>---------------------------------------------------------------- >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-hardware" in the body of the message > > > > ******* |\ __ /| (`\ ******* > * * | o_o |__ ) ) * * > * * // \\ * * > * Nicole Harrington | AKA Hodge Podge * > ----------------------(((---(((-------------------------------- > nicole@unixgirl.com http://www.unixgirl.com/ > webmistress@dangermouse.org http://www.dangermouse.org/ > nicole@deviantimages.com http://www.deviantimages.com/ > > -- Powered By Coca-Cola and FreeBSD -- > -- Why do doctors call what they do practice? -- > -- The Best Place for Your Web Site - www.Kinkyhosting.com -- > > ---------------------------------------------------------------- > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message ******* |\ __ /| (`\ ******* * * | o_o |__ ) ) * * * * // \\ * * * Nicole Harrington | AKA Hodge Podge * ----------------------(((---(((-------------------------------- nicole@unixgirl.com http://www.unixgirl.com/ webmistress@dangermouse.org http://www.dangermouse.org/ nicole@deviantimages.com http://www.deviantimages.com/ -- Powered By Coca-Cola and FreeBSD -- -- Why do doctors call what they do practice? -- -- The Best Place for Your Web Site - www.Kinkyhosting.com -- ---------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 18:18:51 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by hub.freebsd.org (Postfix) with ESMTP id 1F3D937B43C for ; Fri, 11 May 2001 18:18:48 -0700 (PDT) (envelope-from mike@sentex.net) Received: from chimp (cage.simianscience.com [64.7.134.1]) by smtp1.sentex.ca (8.11.2/8.11.1) with ESMTP id f4C1Idl57009; Fri, 11 May 2001 21:18:40 -0400 (EDT) (envelope-from mike@sentex.net) Message-Id: <4.2.2.20010511211759.05f46f08@192.168.0.12> X-Sender: mdtancsa@192.168.0.12 X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.2 Date: Fri, 11 May 2001 21:18:38 -0400 To: Hodge Podge From: Mike Tancsa Subject: Re: Reasonably priced RAID 1 in a 1U server? Cc: hardware@freebsd.org In-Reply-To: References: <5.1.0.14.0.20010511170845.030dc0e0@marble.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 03:46 PM 5/11/2001 -0700, Hodge Podge wrote: >On 11-May-01 Mike Tancsa wrote: > > > > What doesnt work about it ? Did you create the devices before starting the > > management program ? > > > > > > cd /dev > > sh MAKEDEV twe0 > > sh MAKEDEV twed0 > > > > > > /usr/local/sbin/3dmd > > > > ---Mike > > > > > AH HA Adding the MAKEDEV twe0 did the trick! Thanks!! > > However I cant seem to find the docs on how to change the password or > what the >default password is :( Its in the docs. However, I have asked what the format is but the 3ware folks never answered. ---Mike -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Network Administration, mike@sentex.net Sentex Communications www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri May 11 20: 3:31 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from portnoy.lbl.gov (portnoy.lbl.gov [131.243.2.11]) by hub.freebsd.org (Postfix) with ESMTP id BBA3D37B423 for ; Fri, 11 May 2001 20:03:29 -0700 (PDT) (envelope-from jin@portnoy.lbl.gov) Received: (from jin@localhost) by portnoy.lbl.gov (8.11.1/8.11.1) id f4C33M207559 for hardware@freebsd.org; Fri, 11 May 2001 20:03:22 -0700 (PDT) Date: Fri, 11 May 2001 20:03:22 -0700 (PDT) From: Jin Guojun (DSD staff) Message-Id: <200105120303.f4C33M207559@portnoy.lbl.gov> To: hardware@freebsd.org Subject: wavelan server card Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Does FreeBSD support any wavelan server card? I got a ISA server card, which has only once chip -- VADEM VG-469 -- with a foxconn slot for WaveLan PCCARD. I do not know who made this card. On the back, there is a paper label says: LUC Model ISAPC-00 I would like to know if this server card is support by FreeBSD. TIA, -Jin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sat May 12 3:25:47 2001 Delivered-To: freebsd-hardware@freebsd.org Received: from mass.dis.org (mass.dis.org [216.240.45.41]) by hub.freebsd.org (Postfix) with ESMTP id BD3ED37B423 for ; Sat, 12 May 2001 03:25:45 -0700 (PDT) (envelope-from msmith@mass.dis.org) Received: from mass.dis.org (localhost [127.0.0.1]) by mass.dis.org (8.11.3/8.11.3) with ESMTP id f4CAWJm02474; Sat, 12 May 2001 03:32:20 -0700 (PDT) (envelope-from msmith@mass.dis.org) Message-Id: <200105121032.f4CAWJm02474@mass.dis.org> X-Mailer: exmh version 2.1.1 10/15/1999 To: Hodge Podge Cc: hardware@freebsd.org, mwlist@lanfear.com (Marc W) Subject: Re: Reasonably priced RAID 1 in a 1U server? In-reply-to: Your message of "Fri, 11 May 2001 12:58:25 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 12 May 2001 03:32:19 -0700 From: Mike Smith Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > Is there a good working version of the RAID management software around for > the 3ware stuff? I really like it and find it very fast, but I sure wish I had > the management tools for it. > > The ones I can find on Mike Smiths page don't seem to work :( The tool (there is only one) works just fine. You probably forgot to make the twe0 device. -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] V I C T O R Y N O T V E N G E A N C E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message