Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 5 Aug 2001 12:26:37 -0700 (PDT)
From:      Milsa Arlbaar <ervzaer@yahoo.com>
To:        freebsd-hardware@freebsd.org
Subject:   Trouble with PNP ISA modem
Message-ID:  <20010805192637.59358.qmail@web20203.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Hello,

Recently, I have installed FreeBSD. However, I have
been running into trouble getting my pnp ISA modem to
work. It is a Zoom K56FLEX modem, and it is not a
winmodem, and supports hayes commands.

I found the documentation for setting up these things
in the Handbook/FAQ, but
they seem to be no longer valid since the instructions
dont work. The pnp boot time
command doesnt work at all. A friend suggested I
compile the kernel with
"options   PNPBIOS" or so in the config file, it
compiled properly, and I
booted, the only change I noticed where a few new boot
time error messages.

unknown: <K56FLEX Plug and Play Faxmodem> can't assign
resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources

I would like to get the modem working, the lack of
means for configuration and
documentation has left me frustrated. The modem works
in other OSs.

Below I have included printout from pnpinfo command
and relevent parts of dmesg.
Thankyou for any assistance anyone can provide in this
matter, it is
apprieciated.

dmesg:

FreeBSD 4.2-RELEASE #0: Sun Jul  8 15:36:29 GMT 2001

isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on
pci0
isa0: <ISA bus> on isab0

isa0: too many dependant configs (8)

unknown: <K56FLEX Plug and Play Faxmodem> can't assign
resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources

pnpinfo:

Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID OZO8032 (0x32804f3f), Serial Number
0xffffffff
PnP Version 1.0, Vendor Version 4
Device Description: K56FLEX Plug and Play Faxmodem    

Logical Device ID: OZO8039 0x39804f3f #0
    I/O Range 0x400 .. 0xfff0, alignment 0x10, len
0x10
	[16-bit addr]
    DMA: channel(s) 
	16-bit, not a bus master, , count by word,
Compatibility mode
    IRQ:  - only one type (true/edge)

Logical Device ID: OZO8033 0x33804f3f #1
	Device supports I/O Range Check
TAG Start DF
Acceptable Configuration
    I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 4  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 3  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 4  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 3  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 5  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 7  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 5 7 9 10 11 12  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 5 7 9 10 11 12  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 7 9 10 11 12  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 5 9 10 11 12  - only one type (true/edge)
TAG Start DF
Acceptable Configuration
    I/O Range 0x100 .. 0xfff8, alignment 0x8, len 0x8
	[16-bit addr]
    IRQ: 3 4 5 7 9 10 11 12  - only one type
(true/edge)
TAG End DF
End Tag

Successfully got 41 resources, 2 logical fdevs
-- card select # 0x0001

CSN OZO8032 (0x32804f3f), Serial Number 0xffffffff

Logical device #0
IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000
IRQ 0 0
DMA 4 0
IO range check 0x00 activate 0x00

Logical device #1
IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000
IRQ 5 0
DMA 4 0
IO range check 0x00 activate 0x01



__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010805192637.59358.qmail>