Date: Sun, 6 May 2001 19:06:18 +0200 (CEST) From: Jesus Rodriguez <jesus.rodriguez@es.tiscali.com> To: freebsd-isdn@freebsd.org Cc: qguillermo@arrakis.es Subject: fbsd box hangs with avm fritz!card pci (fwd) Message-ID: <Pine.LNX.4.10.10105061905420.32369-100000@wol209.tm.bcn.worldonline.ct>
next in thread | raw e-mail | index | archive | help
Hi there: Although I was hoping this weird behaviour was circumstancial,
I've just upgraded my
FreeBSD box to 4.3 RC and it's happening again:
when I configure the kernel , plug the card intoits slot and the system
is about ten to fifteen minutes working it hangs. No message, no
warning.Nothing at all. The card works well untill it hangs.
This system only hangs when I have this card pluged into in. If I put a
US Robotics Internal
(ISA) there is no problem. It first happened months ago when I bought
this card to test it and I was waiting (and hoping) was just a
release-relationated problem.
TIA for any help or idea to resolve this.
Here follows the results of a uname -a and a dmesg.
**************************************************
FreeBSD Sol.QuerySoft.es 4.3-RC FreeBSD 4.3-RC #2: Wed Apr 18 14:09:03
CEST 2001
**************************************************
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.3-RC #2: Wed Apr 18 14:09:03 CEST 2001
root@:/usr/src/sys/compile/K43
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 126611456 (123644K bytes)
Preloaded elf kernel "kernel" at 0xc03d5000.
Preloaded elf module "splash_bmp.ko" at 0xc03d509c.
Preloaded splash_image_data "/boot/sunflow.bmp" at 0xc03d5140.
VESA: v1.2, 1024k memory, flags:0x0, mode table:0xc00c09da (c00009da)
VESA: S3 Incorporated. Trio64V+
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xed000000-0xed0000ff irrl0: Ethernet address: 00:c0:26:a0:11:fc
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 Trio graphics accelerator> at 9.0 irq 11
isic0: <AVM Fritz!Card PCI> port 0xec00-0xec1f mem 0xed001000-0xed00101f
irq 10
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header
compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4b: ISDN call control device attached
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0a
i4b: unit 0, assigned TEI = 90 = 0x5a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10105061905420.32369-100000>