From owner-freebsd-mobile Sun May 13 0:29:58 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mail2.mmcable.com (fe2.rdc-kc.rr.com [24.94.163.49]) by hub.freebsd.org (Postfix) with ESMTP id 0924E37B424 for ; Sun, 13 May 2001 00:29:56 -0700 (PDT) (envelope-from jbaxter@mmcable.com) Received: from mmcable.com ([65.26.204.59]) by mail2.mmcable.com with Microsoft SMTPSVC(5.5.1877.537.53); Sun, 13 May 2001 02:29:49 -0500 Message-ID: <3AFDF1C0.B671FCAE@mmcable.com> Date: Sun, 13 May 2001 02:30:25 +0000 From: John Baxter X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Subject: what worked for me Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org i wish to thank all of those that answered my postings. i finally have a working os (after more than 1 month and a multitude of attempts with netbsd and openbsd with varing degrees of success). just so it gets posted again, because it was very had for me find these solutions. i have a prostar 6682 (marked as a model 660). my laptop's touchpad does not return the expected response to the probe at boot time, so the touch pad is not recognized. the answer was to add 0x400 as a flag for the ps/2 mouse settings configuration during installation (it can also be set in /boot/kernel.conf if you know the correct settings). i use the sysmouse driver with XF86Free. any other settings and my touchpad is useless. i use the fa_select utility for my Netgear FA410TX rev. D pcmcia enthernet card (i am hoping for a better solution but it works as advertised). i removed the references in the kernel.conf to the ne0 card from the install configuration. this was causing irq 9 to be assigned to a non-existant device. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 0:57:25 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from guldan.demon.nl (cc66986-a.assen1.dr.nl.home.com [213.51.64.104]) by hub.freebsd.org (Postfix) with ESMTP id 53EAF37B43F for ; Sun, 13 May 2001 00:57:18 -0700 (PDT) (envelope-from robert@guldan.demon.nl) Received: (from robert@localhost) by guldan.demon.nl (8.11.1/102.1.0B) id f4D7vCE44849; Sun, 13 May 2001 09:57:12 +0200 (CEST) (envelope-from robert) Date: Sun, 13 May 2001 09:57:12 +0200 From: =?iso-8859-1?Q?Robert_Blacqui=E8re?= To: Matthew David Litwin Cc: freebsd-mobile@freebsd.org Subject: Re: pccard_scheme-0.8.tar.gz Message-ID: <20010513095712.A27129@thorin.guldan.demon.nl> References: <20010512203004.A74774@aurelius.incitatus.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="LZvS9be/3tNcYl/X" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010512203004.A74774@aurelius.incitatus.com>; from matt@dnai.com on Sat, May 12, 2001 at 08:30:04PM -0700 X-Disclaimer: running FreeBSD on a Toshiba. Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --LZvS9be/3tNcYl/X Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable It seems the upload on my site went wrong, sorry for any mishap. I uploaded a new tar file and downloaded it also just i case. It tested ok. crc error.=20 This package will update any file when a pccard (network) is inserted. This will be done with help of an external scripts.=20 See if you like it and have fun... Robert freebsd@guldan.demon.nl=20 On Sat, May 12, 2001 at 08:30:04PM -0700, Matthew David Litwin wrote: > I'm getting a crc error when I try gunzip > http://members.home.nl/r.j.h.blacquiere/pccard/pccard_scheme-0.8.tar.gz >=20 > Problem in the upload? >=20 > Of course, could me a problem at my end. >=20 > Thanks, >=20 > Matt Litwin > matt@dnai.com >=20 > P.S. I just posted on freebsd-mobile about my own attempt > to solve a related problem. It doesn't let you change network > settings on the fly, though. --=20 Microsoft: Where do you want to go today? Linux: Where do you want to go tomorrow? FreeBSD: Are you guys coming or what? OpenBSD: He guys you left some holes out there! --LZvS9be/3tNcYl/X Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjr+PlcACgkQ1ODVtOXCG4hfgQCfRBS/h0kDu1a676LYi0FnkfHK xYUAmQEzH5MsVlslOojDYVTIPxW9O9xv =KSem -----END PGP SIGNATURE----- --LZvS9be/3tNcYl/X-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 6:32:21 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from void.xpert.com (xpert.com [199.203.132.1]) by hub.freebsd.org (Postfix) with ESMTP id 3ABCB37B423 for ; Sun, 13 May 2001 06:32:19 -0700 (PDT) (envelope-from Yonatan@xpert.com) Received: from mailserv.xpert.com ([199.203.132.135]) by void.xpert.com with esmtp (Exim 3.20 #1) id 14yvxP-0002iC-00 for mobile@freebsd.org; Sun, 13 May 2001 16:30:47 +0300 Received: by mailserv.xpert.com with Internet Mail Service (5.5.2650.21) id ; Sun, 13 May 2001 16:32:01 +0300 Message-ID: From: Yonatan Bokovza To: "'mobile@freebsd.org'" Subject: pccardd: No free configuration Date: Sun, 13 May 2001 16:31:54 +0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="windows-1255" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm trying to set up a two interfaced machine on Thinkpad 600E, FreeBSD 4.3-STABLE and 3com megahertz 3CCFEM556B and 3CCFE574BT. Individually each card works great- gets IP, static or from the DHCP, sends and recieves packets and so on. But when I'm trying to put the two of them together I recieve this error from pccardd: "No free configuration for card 3com". I read pccardd's man page, searched through the lists archive and stared at the relevant source code, but I don't know any solution. I wasn't aware of any resource called "configuration", or "driver" according to man, that I can/should manage. Ideas, anyone? Best Regards, Yonatan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 10: 9:16 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [66.42.61.27]) by hub.freebsd.org (Postfix) with ESMTP id C82FF37B423 for ; Sun, 13 May 2001 10:09:13 -0700 (PDT) (envelope-from insane@lunatic.oneinsane.net) Received: by lunatic.oneinsane.net (Postfix, from userid 1000) id 846011555F; Fri, 11 May 2001 08:07:37 -0700 (PDT) Date: Fri, 11 May 2001 08:07:37 -0700 From: Ron 'The InSaNe One' Rosson To: FreeBSD-mobile@freebsd.org Subject: Location Scripts for FreeBSD Message-ID: <20010511080737.A64524@lunatic.oneinsane.net> Reply-To: Ron Rosson Mail-Followup-To: FreeBSD-mobile@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD lunatic.oneinsane.net 4.3-STABLE X-Moon: The Moon is Waning Gibbous (84% of Full) X-Opinion: What you read here is my IMHO X-WWW: http://www.oneinsane.net X-GPG-FINGERPRINT: 3F11 DB43 F080 C037 96F0 F8D3 5BD2 652B 171C 86DB X-Uptime: 8:00AM up 7 days, 23:32, 1 user, load averages: 0.06, 0.12, 0.08 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well I am the maintainer of pccard-site which was originnally written by Adam Laurie. Its funny in the last couple of days we have had the following scripts mentioned on this mailing list. http:/members.home.nl/r.j.h.blacquiere/pccard/index.html http://www.dnai.com/~matt/locations.html http://www.freebsd.org/cgi/ports.cgi?query=personality&stype=all http://www.sdbug.org/download.php (pccard-site) It would be nice to get a colaberation going on all of our scripts and then get it committed to the ports tree. Following after Adam my goals are to be able to have pccard-site be independent of the systems files (no modifying of the systems files) I have gotten away with this except for a modification to rc.shutdown. Just thinking out load. -- ------------------------------------------------------------------------------ Ron Rosson ... and a UNIX user said ... The InSaNe One rm -rf * insane@oneinsane.net and all was /dev/null and *void() ------------------------------------------------------------------------------ "Out the token ring, through the router, down the fiber, off a switch, past the firewall, down the T1 ... nothing but Net." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 10:53: 9 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns2.alphaque.com (ns2.alphaque.com [202.185.254.11]) by hub.freebsd.org (Postfix) with SMTP id BBCBB37B423 for ; Sun, 13 May 2001 10:53:01 -0700 (PDT) (envelope-from dinesh@alphaque.com) Received: (qmail 22502 invoked from network); 13 May 2001 17:53:00 -0000 Received: from ns2.alphaque.com (HELO prophet.alphaque.com) (202.185.254.11) by ns2.alphaque.com with SMTP; 13 May 2001 17:53:00 -0000 Received: from localhost (temlpl@localhost [127.0.0.1]) by prophet.alphaque.com (8.11.3/8.11.3) with ESMTP id f4D6Pvv06950; Sun, 13 May 2001 14:25:57 +0800 (MYT) (envelope-from dinesh@alphaque.com) Date: Sun, 13 May 2001 14:25:57 +0800 (MYT) From: Dinesh Nair To: "Daniel O'Connor" Cc: freebsd-mobile@FreeBSD.ORG, "Richard C." , Kevin Oberman , WATANABE Kiyoshi Subject: Re: Modem on laptop... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, 12 May 2001, Daniel O'Connor wrote: > Are you setting the country code parameter correctly? very much so. i am in malaysia and ATI9 shows this. > I have a bigger list than is in the ltmodem distribution (I generated it from > the modem :) any chance of grabbing this one ? --dinesh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 16:10: 4 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id CD34F37B423 for ; Sun, 13 May 2001 16:09:59 -0700 (PDT) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.3/8.11.1) with ESMTP id f4DN9wN16307 for ; Sun, 13 May 2001 17:09:59 -0600 (MDT) (envelope-from imp@harmony.village.org) Message-Id: <200105132309.f4DN9wN16307@harmony.village.org> To: mobile@freebsd.org Subject: MECIA device Date: Sun, 13 May 2001 17:09:58 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [[ I'll send a Japanese version of this to the Japanese mobile lists as soon as I've translsated it ]] The NEC Orignal PCMCIA controller is found in several Japanese NOTE98 machines. This is also known as the MECIA, which is where the driver gets its name. Right now, there's a separate driver within a driver inside the pcic driver. I'd like to migrate it its own driver. As a first step, I've #ifdef'd the pcic driver for MECIA_SUPPORT. Once this dirver is committed to the tree, I plan on unifdefing -UMECIA_SUPPORT in the pcic driver. This seeems to work for me to the level that mecia was supported before. This should also make it possible to migratre it to NEWCARD. Comments to me and/or the list. http://people.freebsd.org/~imp/mecia.diff Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 17:59: 0 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from midget.dons.net.au (daniel.lnk.telstra.net [139.130.137.70]) by hub.freebsd.org (Postfix) with ESMTP id C80D537B422 for ; Sun, 13 May 2001 17:58:49 -0700 (PDT) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (root@midget.dons.net.au [203.31.81.7]) by midget.dons.net.au (8.11.3/8.9.3) with ESMTP id f4E0uxN75205; Mon, 14 May 2001 10:27:00 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Message-ID: X-Mailer: XFMail 1.4.7 on FreeBSD X-Priority: 3 (Normal) MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="_=XFMail.1.4.7.FreeBSD:20010513195655:27806=_" In-Reply-To: Date: Sun, 13 May 2001 19:56:55 -0500 (PET) From: "Daniel O'Connor" To: Dinesh Nair Subject: Re: Modem on laptop... Cc: WATANABE Kiyoshi , Kevin Oberman , "Richard C." , freebsd-mobile@FreeBSD.ORG Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format --_=XFMail.1.4.7.FreeBSD:20010513195655:27806=_ Content-Type: text/plain; charset=us-ascii On 13-May-2001 Dinesh Nair wrote: > > I have a bigger list than is in the ltmodem distribution (I generated it > > from > > the modem :) > > any chance of grabbing this one ? Sure, it's attached.. Do you get hangs if you dialup and hangup a few times? --- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum --_=XFMail.1.4.7.FreeBSD:20010513195655:27806=_ Content-Disposition: attachment; filename="t35-codes.txt" Content-Transfer-Encoding: 7bit Content-Description: t35-codes.txt Content-Type: text/plain; charset=us-ascii; name=t35-codes.txt; SizeOnDisk=1872 Argentina = 07 Australia = 09 Austria = 0a Bangladesh = 0d Barbados = 0e Belgium = 0f Bolivia = 14 Brazil = 16 Bulgaria = 1b Canada = 20 Chile = 25 Colombia = 27 Costa Rica = 2b Cyprus = 2d Czech Republic = 2e Denmark = 31 Ecuador = 35 Egypt = 36 Finland = 3c France = 3d Germany = 42 Greece = 46 Guam = 48 Guatemala = 49 Hong Kong = 50 Hungary = 51 Iceland = 52 India = 53 Indonesia = 54 Ireland = 57 Israel = 58 Italy = 59 Japan = 00 Korea = 61 Kuwait = 62 Lebanon = 64 Liechtenstein = 68 Luxembourg = 69 Malaysia = 6c Mexico = 73 Netherlands = 7b New Zealand = 7e Nicaragua = 7f North America = b5 Norway = 82 Oman = 83 Pakistan = 84 Panama = 85 Paraguay = 87 Peru = 88 Philippines = 89 Poland = 8a Portugal = 8b PRC = 26 Puerto Rico = 8c Romania = 8e Russia = b8 Saudi Arabia = 98 Singapore = 9c South Africa = 9f Spain = a0 Sri Lanka = a1 Sweden = a5 Switzerland = a6 Thailand = a9 Turkey = ae UAE = b3 Ukraine = b2 United Kingdom = b4 Uruguay = b7 Venezuela = bb Vietnam = bc --_=XFMail.1.4.7.FreeBSD:20010513195655:27806=_-- End of MIME message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 18:23:54 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from angmar.mel.vet.com.au (angmar.mel.vet.com.au [203.103.154.62]) by hub.freebsd.org (Postfix) with ESMTP id A63D037B424 for ; Sun, 13 May 2001 18:23:50 -0700 (PDT) (envelope-from thutton@vet.com.au) Received: from kevin.vic.bigpond.net.au (kevin.mel.vet.com.au [203.103.154.60]) by angmar.mel.vet.com.au (Postfix) with ESMTP id 3998114F43A for ; Mon, 14 May 2001 11:04:06 +1000 (EST) From: Toby Hutton MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15103.11936.163098.939181@kevin.vic.bigpond.net.au> Date: Mon, 14 May 2001 11:02:24 +1000 To: freebsd-mobile@freebsd.org Subject: Two identical pccard NICs? X-Mailer: VM 6.92 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Reply-To: Toby Hutton Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, I have two old 3Com 3c589 cards, one's a C and the other's a D but they both use the same entry in pccard.conf. The first one always fires up correctly when inserted but the second always fails with an error like "no configuration free" (sorry, it's at home so I can't get the real error at the moment.) I'm guessing pccardd is trying to allocate identical resources to the two cards? I tried inserting a Surecom card with a 3Com card, and they work fine together, becomine ed0 and ep0 respectively, so I know it's possible to have two NICs in at the same time. Is it possible to have two identical cards though? -- Toby. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 21:42:43 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns2.alphaque.com (ns2.alphaque.com [202.185.254.11]) by hub.freebsd.org (Postfix) with SMTP id EE71237B423 for ; Sun, 13 May 2001 21:42:35 -0700 (PDT) (envelope-from dinesh@alphaque.com) Received: (qmail 25330 invoked from network); 14 May 2001 04:42:35 -0000 Received: from ns2.alphaque.com (HELO prophet.alphaque.com) (202.185.254.11) by ns2.alphaque.com with SMTP; 14 May 2001 04:42:35 -0000 Received: from localhost (3g653d@localhost [127.0.0.1]) by prophet.alphaque.com (8.11.3/8.11.3) with ESMTP id f4E2kRv08707; Mon, 14 May 2001 10:46:27 +0800 (MYT) (envelope-from dinesh@alphaque.com) Date: Mon, 14 May 2001 10:46:27 +0800 (MYT) From: Dinesh Nair To: "Daniel O'Connor" Cc: WATANABE Kiyoshi , Kevin Oberman , "Richard C." , freebsd-mobile@FreeBSD.ORG Subject: Re: Modem on laptop... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, 13 May 2001, Daniel O'Connor wrote: > Sure, it's attached.. thanks. > Do you get hangs if you dialup and hangup a few times? nope, nothing whatsoever. and scratch my earlier observation of a maximum 33.6kbps connection. i've gotten speeds in the 50kbps range over the last few hours. one thing i noticed is, if i suspend my compaq armada300, and the plug in the phone line, the notebook wakes up as if i pressed the wake button. :) --dinesh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 22:10:47 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from guardian.apnic.net (guardian.apnic.net [203.37.255.100]) by hub.freebsd.org (Postfix) with ESMTP id A868D37B422 for ; Sun, 13 May 2001 22:10:44 -0700 (PDT) (envelope-from ggm@apnic.net) Received: (from mail@localhost) by guardian.apnic.net (8.9.3/8.9.3) id PAA25864 for ; Mon, 14 May 2001 15:10:38 +1000 (EST) Received: from hadrian.staff.apnic.net(192.168.1.1) by int-gw.staff.apnic.net via smap (V2.1) id xma025862; Mon, 14 May 01 15:10:27 +1000 Received: (from ggm@localhost) by hadrian.staff.apnic.net (8.9.3/8.9.3) id PAA04880 for freebsd-mobile@freebsd.org; Mon, 14 May 2001 15:10:23 +1000 (EST) Message-Id: <200105140510.PAA04880@hadrian.staff.apnic.net> From: ggm@apnic.net To: freebsd-mobile@freebsd.org Date: Mon, 14 May 2001 15:09 EST Subject: power saving/power usage Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Can somebody give me brief summary on how FreeBSD interacts with so-called power-saving feature-ettes on laptops? I am suspecting that I get less (apparent) time per battery charge on UNIX than on Windeath. I am also suspecting this is because you have to actively frob the CPU to tell it to [drop clock|drop volts|slow down] etc. Clue density -1! (sorry) -George To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 22:35:23 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns8.blueboxinternet.com (ns8.blueboxinternet.com [66.33.0.128]) by hub.freebsd.org (Postfix) with ESMTP id 5087437B423 for ; Sun, 13 May 2001 22:35:19 -0700 (PDT) (envelope-from jacob@vicyouth.com) Received: from h221.vicyouth.com (p54-tnt2.mel.ihug.com.au [203.173.164.54]) by ns8.blueboxinternet.com (8.9.3/8.9.3) with ESMTP id BAA11124 for ; Mon, 14 May 2001 01:30:21 -0400 Message-Id: <5.0.0.25.2.20010514153649.00a42d90@cybernex.net.au> X-Sender: jacob@mail.vicyouth.com X-Mailer: QUALCOMM Windows Eudora Version 5.0 Date: Mon, 14 May 2001 15:36:59 +1000 To: freebsd-mobile@freebsd.org From: Jacob Rhoden Subject: Toshiba Tecra 550CDT - PCCARD Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I have been using FreeBSD for a while now, and have just recently procured a Toshiba Tecra 550CDT laptop, and would like to be able to network it. I have installed FreeBSD 4.3-RELEASE and have tried two different pcmcia cards in it, my DLink 660DE and a Xircom CreditCard Ethernet+Modem card. Both are listed in the supported hardware. When I boot with the DLink, the lights light up but they dont flash to indicate network traffic (as it does when booted into windows) and using the xircom, the lights don't flash at all. When I boot, FreeBSD recognises the pccard slots, and detects there is a card. During boot, when it detects there is a card, it pauses for about 5 seconds, but makes no sound. What do I need to do to make the card appear as a valid network interface? When I do "ifconfig -a" it does not appear, and I have enabled pccard support in rc.conf (well have put set the settings which I figure you need to set, as I cant find any real help on the web about this) Thanks for your help in advance, Regards, Jacob Rhoden. _______________________________________________________________ "As for me and my house, we will serve the Lord" (Joshua 24:15) Jacob Rhoden - Communications Director - jj@cybernex.net.au Victorian Seventh-Day Adventist Youth Department Office: 9259 2101 Mobile: 0403 788 386 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 22:51:29 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mail6.mmcable.com (fe6.rdc-kc.rr.com [24.94.163.53]) by hub.freebsd.org (Postfix) with ESMTP id 19FBB37B424 for ; Sun, 13 May 2001 22:51:26 -0700 (PDT) (envelope-from jbaxter@mmcable.com) Received: from mmcable.com ([65.26.204.59]) by mail6.mmcable.com with Microsoft SMTPSVC(5.5.1877.537.53); Mon, 14 May 2001 00:51:18 -0500 Message-ID: <3AFF727E.EFD46017@mmcable.com> Date: Mon, 14 May 2001 00:51:58 -0500 From: John Baxter X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.4.2-2 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Subject: mouse on drugs Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org freebsd 4.3-stable touchpad ps/2 mouse moused is running sysmouse used in X86Free after using my mouse for a while (any time between 1 and 10 min), it freaks out.. jumps wildly and cust and pastes and open windows... all kinds of weird things. i think the problem is the power managemnt chip. here is why... when i run rh 7.1 linux i dont have this problem, but i do have a time when the machine seems to lockup the mouse, during this time it seems that the power managment gets an update. this update hangs the mouse for about 10-15 sec, then all is normal. during booting freebsd 4.3-stable, i get a dmesg about 'chip1:' Intel (some chip number) Power Management... on irq 0 or 1. this comes up just before the floppy drive probe. sorry for not having the exact message. i dont get a apm0 device configured. i have tried enabling and disabling power management and recompiled a new kernel and turned on apm in rc.conf. no effect either way. what device is 'chip1:'???? how can i disable the probe for power management? any other thoughts would be appreciated. thanks john baxter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sun May 13 23:13: 3 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from node0b2a.a2000.nl (node0b2a.a2000.nl [62.108.11.42]) by hub.freebsd.org (Postfix) with ESMTP id D8CFF37B424 for ; Sun, 13 May 2001 23:13:00 -0700 (PDT) (envelope-from gareth@node0b2a.a2000.nl) Received: from localhost (gareth@localhost) by node0b2a.a2000.nl (8.11.3/8.11.3) with ESMTP id f4E6Dqd11012; Mon, 14 May 2001 08:14:18 +0200 (CEST) (envelope-from gareth@node0b2a.a2000.nl) Date: Mon, 14 May 2001 08:13:37 +0200 (CEST) From: Gareth Williams To: Jacob Rhoden Cc: Subject: Re: Toshiba Tecra 550CDT - PCCARD In-Reply-To: <5.0.0.25.2.20010514153649.00a42d90@cybernex.net.au> Message-ID: <20010514081302.U11010-100000@node0b2a.a2000.nl> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This may sound a bit silly, but have you copied pccard.conf from /etc/defaults to /etc? On Mon, 14 May 2001, Jacob Rhoden wrote: > Hi, > > I have been using FreeBSD for a while now, and have just recently procured > a Toshiba Tecra 550CDT laptop, and would like to be able to network it. I > have installed FreeBSD 4.3-RELEASE and have tried two different pcmcia > cards in it, my DLink 660DE and a Xircom CreditCard Ethernet+Modem card. > Both are listed in the supported hardware. > > When I boot with the DLink, the lights light up but they dont flash to > indicate network traffic (as it does when booted into windows) and using > the xircom, the lights don't flash at all. > > When I boot, FreeBSD recognises the pccard slots, and detects there is a > card. During boot, when it detects there is a card, it pauses for about 5 > seconds, but makes no sound. > > What do I need to do to make the card appear as a valid network interface? > When I do "ifconfig -a" it does not appear, and I have enabled pccard > support in rc.conf (well have put set the settings which I figure you need > to set, as I cant find any real help on the web about this) > > Thanks for your help in advance, > > Regards, > Jacob Rhoden. > > _______________________________________________________________ > "As for me and my house, we will serve the Lord" (Joshua 24:15) > Jacob Rhoden - Communications Director - jj@cybernex.net.au > Victorian Seventh-Day Adventist Youth Department > Office: 9259 2101 Mobile: 0403 788 386 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 0:36: 2 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from freebsd.dk (fw-rl0.freebsd.dk [212.242.86.114]) by hub.freebsd.org (Postfix) with ESMTP id D161637B423; Mon, 14 May 2001 00:35:58 -0700 (PDT) (envelope-from sos@freebsd.dk) Received: (from sos@localhost) by freebsd.dk (8.11.3/8.11.3) id f4E7Zso17545; Mon, 14 May 2001 09:35:54 +0200 (CEST) (envelope-from sos) From: Søren Schmidt Message-Id: <200105140735.f4E7Zso17545@freebsd.dk> Subject: Re: slow IDE performance In-Reply-To: <200105111639.f4BGd6c03347@ptavv.es.net> "from Kevin Oberman at May 11, 2001 09:39:06 am" To: Kevin Oberman Date: Mon, 14 May 2001 09:35:53 +0200 (CEST) Cc: Mike Smith , Leon Breedt , freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=ISO-8859-1 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It seems Kevin Oberman wrote: > The consensus of the experts (including Soren Schmidt, author of the > ATA driver,) after the referenced thread was that there were serious > problems with the write cache implementation on may IDE disks that > made write cache use "dangerous at any speed". Not just with soft > updates, but with normal synchronous disk operation. Hmm, maybe its time for me to chime in here... The only problem with write cache is that you can potentially loose uptil a cache full of data if the power goes away unexpectedly. This is especially bad if you use softupdates, but harmfull on all filesystems of cause. Without WC you should only loose the last sector that is about to be written or actively being written when power goes away, which can still be bad, but more limitted in scope. Now, that aside, it is also a fact that lots of modern disks takes a significant performance hit when WC is disabled, the worst example so far are some of the newer Maxtors, they drop to < 8MB/s write speed in that case. > Since Windows does not make use of many ATA functions used to make > cache fairly safe for SCSI and often does not ever write any data from > cache to disk in a power failure, the correct operation of the cache > flush operation is critical, but I have been told that it simply does > not work with many disks. Well, I dont know where you heard that, but the flush cache command has worked on all the ATA disks I've seen so far... The problem at hand is only related to using an on-disk cache, the reason is that the system _thinks_ it has written data to the media, and that is not nessesarily the case when WC is enabled, and since softupdates relies on that info, well.... We are looking at ways to try to do a flush of the disk cache in the right places, but so far we have no working setup. Now I've done some serious testing here on this problem, using an "automated power outage gadget" and the results so far tells me the problem with just using WC is existant, but it has not corrupted data any worse than without (data sample is > 500 powercuts with/without WC on). One interesting thing is that using IBM disks and utilising tagged queueing seems to work as expected, the disk apparently first reports a write done when the data has actually hit the media, or I've just been lucky about well over 500 times there also :) -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 5:52:46 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from suite224.net (cambot.suite224.net [209.176.64.2]) by hub.freebsd.org (Postfix) with ESMTP id 42E2737B422 for ; Mon, 14 May 2001 05:52:44 -0700 (PDT) (envelope-from tgwilt@suite224.net) Received: from [209.176.64.4] (HELO mike) by suite224.net (CommuniGate Pro SMTP 3.4.5) with ESMTP id 6654863 for FreeBSD-mobile@freebsd.org; Mon, 14 May 2001 08:47:24 -0400 Date: Mon, 14 May 2001 08:52:40 -0400 (EDT) From: Tom Gwilt X-Sender: tgwilt@mike To: FreeBSD-mobile@freebsd.org Subject: Thinkpad, moused, and FBSD4.3 In-Reply-To: <20010511080737.A64524@lunatic.oneinsane.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm new to the list, but a cursory perusal of the archives didn't seem to have any answer - although I may have been looking in the wrong spot. Recently purchased a ThinkPad 760XL. Installing FreeBSD was, naturally, the 2nd thing I did, the first being to wipe windows off the drive. Everything works so far - network, XFree with icewm, etc. Everything except the cut and paste feature of the mouse. moused is running in text mode, and the XF86Config file uses /dev/sysmouse. Highlighting text is no problem, but it just won't copy/paste like a regular mouse does on any other FreeBSD box I use. I am open to suggestions . TIA, Tom Gwilt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 6:38:56 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id 99F9937B422 for ; Mon, 14 May 2001 06:38:53 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.3/8.11.3) with ESMTP id f4EDctP02430; Mon, 14 May 2001 09:38:55 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200105141338.f4EDctP02430@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: John Baxter Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: mouse on drugs In-Reply-To: Your message of "Mon, 14 May 2001 00:51:58 CDT." <3AFF727E.EFD46017@mmcable.com> From: dochawk@psu.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 14 May 2001 09:38:55 -0400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > freebsd 4.3-stable > touchpad ps/2 mouse > moused is running > sysmouse used in X86Free > after using my mouse for a while (any time between 1 and 10 min), it > freaks out.. jumps wildly and cust and pastes and open windows... all > kinds of weird things. which xfree? the mouse daemon and Xfree4 don't get along well--set XFree to talk directly to /dev/psaux, and disable moused. hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 6:41:17 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id ED4D137B422 for ; Mon, 14 May 2001 06:41:14 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.3/8.11.3) with ESMTP id f4EDfGP02446; Mon, 14 May 2001 09:41:16 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200105141341.f4EDfGP02446@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: Tom Gwilt Cc: FreeBSD-mobile@FreeBSD.ORG Subject: Re: Thinkpad, moused, and FBSD4.3 In-Reply-To: Your message of "Mon, 14 May 2001 08:52:40 EDT." From: dochawk@psu.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 14 May 2001 09:41:16 -0400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Everything works so far - network, XFree with icewm, etc. Everything > except the cut and paste feature of the mouse. > > moused is running in text mode, and the XF86Config file uses > /dev/sysmouse. > > Highlighting text is no problem, but it just won't copy/paste like a > regular mouse does on any other FreeBSD box I use. Try using /dev/psaux, at least if you're useing XFree4==it doesn't get along with the mouse daemon on thinkpads. Also, did you set "emulate three buttons" when configuring X? Also, an increasing number of applications seem to need shift-middle to paste--lynx, trn, . . . those that use the mouse in text mode for themselves typically need the shift to pass the click along. hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 6:46:17 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id C1E7037B422 for ; Mon, 14 May 2001 06:46:14 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.3/8.11.3) with ESMTP id f4EDkHP02481 for ; Mon, 14 May 2001 09:46:17 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200105141346.f4EDkHP02481@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: freebsd-mobile@FreeBSD.ORG Subject: booting away from the network From: "Richard E. Hawkins" Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 14 May 2001 09:46:17 -0400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org One thing that I haven't seen mentioned so far in the network/ppp booting saga is getting the machine to boot on its own away from the network. I get long/perpetual pauses for ntpdate and sendmail, which I ^C away from. Ideally, the system would find that it doesn't have a connection on fxp0 and not try to start daemons that won't work (and perhaps start ppp on demand and set a global variable that could be read in my .xsession so that it doesn't start applications that would try to use the network). hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 6:47:18 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by hub.freebsd.org (Postfix) with ESMTP id 3802337B422 for ; Mon, 14 May 2001 06:47:16 -0700 (PDT) (envelope-from david@catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.10.0/8.10.0) id f4EDkdY74566; Mon, 14 May 2001 06:46:39 -0700 (PDT) Date: Mon, 14 May 2001 06:46:39 -0700 (PDT) From: David Wolfskill Message-Id: <200105141346.f4EDkdY74566@bunrab.catwhisker.org> To: dochawk@psu.edu, jbaxter@mmcable.com Subject: Re: mouse on drugs Cc: freebsd-mobile@FreeBSD.ORG In-Reply-To: <200105141338.f4EDctP02430@fac13.ds.psu.edu> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >From: dochawk@psu.edu >Date: Mon, 14 May 2001 09:38:55 -0400 >> freebsd 4.3-stable >> touchpad ps/2 mouse >> moused is running >> sysmouse used in X86Free >> after using my mouse for a while (any time between 1 and 10 min), it >> freaks out.. jumps wildly and cust and pastes and open windows... all >> kinds of weird things. >which xfree? the mouse daemon and Xfree4 don't get along well--set >XFree to talk directly to /dev/psaux, and disable moused. That has not been my experience. I'm running XF86-4.0.3 on my laptop (under both FreeBSD 4.3-S & 5.0-C). I use moused, because I was hoping that the "touchpad tap" would be distinguishable from pressing & releasing the let mouse button, in which case I would be able to use moused's re-mapping abilities to actually get access to 3 mouse buttons without resorting to chording. (Unfortunately, it appears that the driver sees the actions as equivalent, which makes it pretty hard to distinguish between them -- but that's not the topic of this thread.) In any case, I've certainly seen no odd behavior of the mouse at all (other than that apparently designed-in flaw). Cheers, david -- David H. Wolfskill david@catwhisker.org As a computing professional, I believe it would be unethical for me to advise, recommend, or support the use (save possibly for personal amusement) of any product that is or depends on any Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 7:16: 2 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id ED92037B422 for ; Mon, 14 May 2001 07:15:58 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.3/8.11.3) with ESMTP id f4EEFoP02806; Mon, 14 May 2001 10:15:54 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200105141415.f4EEFoP02806@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: David Wolfskill Cc: jbaxter@mmcable.com, freebsd-mobile@FreeBSD.ORG Subject: Re: mouse on drugs In-Reply-To: Your message of "Mon, 14 May 2001 06:46:39 PDT." <200105141346.f4EDkdY74566@bunrab.catwhisker.org> From: dochawk@psu.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 14 May 2001 10:15:50 -0400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org david declared, > >which xfree? the mouse daemon and Xfree4 don't get along well--set > >XFree to talk directly to /dev/psaux, and disable moused. > That has not been my experience. > I'm running XF86-4.0.3 on my laptop (under both FreeBSD 4.3-S & 5.0-C). It's early, and I may still be confused :) The problem may be specific to the A2* series of thinkpads. But it's nothing compared to the problems with xf86cfg, which bring down the kernel . . . hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 7:23:46 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from suite224.net (cambot.suite224.net [209.176.64.2]) by hub.freebsd.org (Postfix) with ESMTP id 7851F37B423 for ; Mon, 14 May 2001 07:23:43 -0700 (PDT) (envelope-from tgwilt@suite224.net) Received: from [209.176.64.4] (HELO mike) by suite224.net (CommuniGate Pro SMTP 3.4.5) with ESMTP id 6657627 for FreeBSD-mobile@FreeBSD.ORG; Mon, 14 May 2001 10:18:26 -0400 Date: Mon, 14 May 2001 10:23:43 -0400 (EDT) From: Tom Gwilt X-Sender: tgwilt@mike To: FreeBSD-mobile@FreeBSD.ORG Subject: Re: Thinkpad, moused, and FBSD4.3 In-Reply-To: <200105141341.f4EDfGP02446@fac13.ds.psu.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 14 May 2001 dochawk@psu.edu wrote: > Try using /dev/psaux, at least if you're useing XFree4==it doesn't get > along with the mouse daemon on thinkpads. None of my FBSD boxen have /dev/psaux. I seem to remember seeing that on BSDi, however. The appropriate device seems to be /dev/psm0, which doesn't seem to work at all. I am using XFree3.3.6. Also forgot to mention (unless you check the subject line) that I'm using FreeBSD 4.3-Release. I can live without cut and paste. If I have to. I guess. > > Also, did you set "emulate three buttons" when configuring X? Yes. Tried it both ways - with and without. > Also, an increasing number of applications seem to need shift-middle to > paste--lynx, trn, . . . those that use the mouse in text mode for > themselves typically need the shift to pass the click along. Interesting. I've tried shift-middle, alt-shift-middle, ctrl-shifto -middle, alt-middle, ctrl-middle, sacrifice a goat-middle...you get the idea. Nothing seems to work. Right now I'd be happy to get it working with an xterm. Thanks for the advice, Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 7:27:48 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by hub.freebsd.org (Postfix) with ESMTP id 3752137B422 for ; Mon, 14 May 2001 07:27:46 -0700 (PDT) (envelope-from david@catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.10.0/8.10.0) id f4EERaw74668 for freebsd-mobile@FreeBSD.ORG; Mon, 14 May 2001 07:27:36 -0700 (PDT) Date: Mon, 14 May 2001 07:27:36 -0700 (PDT) From: David Wolfskill Message-Id: <200105141427.f4EERaw74668@bunrab.catwhisker.org> Subject: Re: mouse on drugs Cc: freebsd-mobile@FreeBSD.ORG In-Reply-To: <200105141415.f4EEFoP02806@fac13.ds.psu.edu> Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >From: dochawk@psu.edu >Date: Mon, 14 May 2001 10:15:50 -0400 >> >which xfree? the mouse daemon and Xfree4 don't get along well--set >> >XFree to talk directly to /dev/psaux, and disable moused. >> That has not been my experience. >> I'm running XF86-4.0.3 on my laptop (under both FreeBSD 4.3-S & 5.0-C). >It's early, and I may still be confused :) I s'pose "earliness" is somewhat subjective.... :-) >The problem may be specific to the A2* series of thinkpads. Ah; now *that* is a distinct possibility. >But it's nothing compared to the >problems with xf86cfg, which bring down the kernel . . . ? Hmmm... Again, that was not my experience (though I only run XF86-4 on my own laptop, which is not a ThinkPad of any kind). But I used xf86cfg to configure XF86-4, since my screen resolution was non-standard (1400x1050), and the graphical config program choked & died. Cheers, david (who's been up for ~3 hrs. so far today; built today's -STABLE....) -- David H. Wolfskill david@catwhisker.org As a computing professional, I believe it would be unethical for me to advise, recommend, or support the use (save possibly for personal amusement) of any product that is or depends on any Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 7:32:58 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from suite224.net (cambot.suite224.net [209.176.64.2]) by hub.freebsd.org (Postfix) with ESMTP id 7230437B422 for ; Mon, 14 May 2001 07:32:53 -0700 (PDT) (envelope-from tgwilt@suite224.net) Received: from [209.176.64.4] (HELO mike) by suite224.net (CommuniGate Pro SMTP 3.4.5) with ESMTP id 6657906; Mon, 14 May 2001 10:27:36 -0400 Date: Mon, 14 May 2001 10:32:53 -0400 (EDT) From: Tom Gwilt X-Sender: tgwilt@mike To: dochawk@psu.edu Cc: FreeBSD-mobile@FreeBSD.ORG Subject: Re: Thinkpad, moused, and FBSD4.3 In-Reply-To: <200105141341.f4EDfGP02446@fac13.ds.psu.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 14 May 2001 dochawk@psu.edu wrote: > Also, did you set "emulate three buttons" when configuring X? > hawk Just checked my XF86Config file. Although the Emulate3Timeout was there, the Emulate3Buttons wasn't. Added that, and now it works! Dunno why that didn't get there before. I used XF86Setup and specifically checked Emulate 3 Buttons... At any rate, thanks for the advice. Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 8:38: 4 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mailout1-1.nyroc.rr.com (mailout1-0.nyroc.rr.com [24.92.226.81]) by hub.freebsd.org (Postfix) with ESMTP id 0987137B422 for ; Mon, 14 May 2001 08:38:01 -0700 (PDT) (envelope-from yfcho@ms9.hinet.net) Received: from YuFongWork (roc-66-24-100-50.rochester.rr.com [66.24.100.50]) by mailout1-1.nyroc.rr.com (8.11.2/RoadRunner 1.03) with SMTP id f4EFaA004167 for ; Mon, 14 May 2001 11:36:10 -0400 (EDT) From: "Yu-Fong Cho" To: Subject: D-Link DFE-660 in FreeBSD 5.0-Current... Date: Mon, 14 May 2001 11:39:40 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Disposition-Notification-To: "Yu-Fong Cho" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I am trying to make my D-Link DFE-660 working on my laptop with 5.0-current 0507. The PCMCIA controller is TI-1225. After I compiled the kernel, system could recognize the card, but it still can't active it. Here is the message: pccbb0: card inserted: event=0x00000000, state=30000820 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP0V [44] pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPPVCC [11] TUPLE: LINKTARGET [3]: 43 49 53 Manufacturer ID: 49013102 Functions: Network Adaptor, Memory Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 Product version: 5.0 Product name: D-Link | DFE-660 | CardBus Ethernet | 10/100 | TUPLE: CONFIG_CB [6]: 03 01 2A 00 00 00 cardbus0: Opening BAR: type=IO, bar=10, len=0080 cardbus0: Opening BAR: type=MEM, bar=14, len=0080 cardbus0: Invalid BAR number: 07(06) TUPLE: CFTABLE_ENTRY_CB [10]: 41 39 01 b5 1e 02 b0 fc fe 84 CIS reading done cardbus0: (vendor=0x1011 dev=0x0019) at 0.0 irq 128 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: card activation failed Any idea? It seems there is no config in cardbus. How could I let it works? Thanks. Yu-Fong Cho -- Love is a game. Easy to start. Hard to finish. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 8:41: 6 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from unbeat.com (24-168-36-66.nyc.rr.com [24.168.36.66]) by hub.freebsd.org (Postfix) with ESMTP id A353F37B424 for ; Mon, 14 May 2001 08:40:59 -0700 (PDT) (envelope-from moxie@unbeat.com) Received: (from moxie@localhost) by unbeat.com (8.11.2/8.11.2) id f4EFeee03125; Mon, 14 May 2001 11:40:40 -0400 (EDT) (envelope-from moxie) Date: Mon, 14 May 2001 11:40:39 -0400 From: JT To: Richard Tobin Cc: freebsd-mobile@freebsd.org Subject: Re: Sony Z600-HEK - un-recommendation Message-ID: <20010514114039.E345@zed.unbeat.com> Mail-Followup-To: Richard Tobin , freebsd-mobile@freebsd.org References: <200105081353.OAA24182@rhymer.cogsci.ed.ac.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200105081353.OAA24182@rhymer.cogsci.ed.ac.uk>; from richard@cogsci.ed.ac.uk on Tue, May 08, 2001 at 02:53:42PM +0100 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It does work on the Vaio PCG-Z505LS Obviously it's a proof of concept, so just for the record: it currently sets modulus 255; no argument cores it. Thanks! I was afraid to dump windows for this reason alone! I've had one or two crashes (well, I ran out of power) that dimmed the brightness afterwards. Somewhere else in this thread Warner Losh mentions tweaking the brightness before/after suspend - that's really a great idea for getting a little extra power saving! On Tue, May 08, 2001 at 02:53:42PM +0100, Richard Tobin wrote: > > 1. Screen brightess - Only works under windows. > > Here is a program to set the brightness under FreeBSD. 0 seems to be > full brightness, 255 minimum. You'll have to be root to run it. It's > based on a Linux program. > > -- Richard > > /* Set brightness of Vaio screen. Tested on Z600-TEK. */ > /* Based on http://us1.samba.org/ftp/unpacked/picturebook/setbrightness.c */ > > #include > #include > #include > #include > > #define DATA_REG 0x62 > #define CST_REG 0x66 > > typedef unsigned short u16; > > static void ecr_set(u16 addr, u16 value) > { > while (inw(CST_REG) & 3) usleep(1); > outw(CST_REG, 0x81); > while (inw(CST_REG) & 2) usleep(1); > outw(DATA_REG, addr); > while (inw(CST_REG) & 2) usleep(1); > outw(DATA_REG, value); > while (inw(CST_REG) & 2) usleep(1); > } > > static u16 ecr_get(u16 addr) > { > while (inw(CST_REG) & 3) usleep(1); > outb(CST_REG, 0x80); > while (inw(CST_REG) & 2) usleep(1); > outb(DATA_REG, addr); > while (inw(CST_REG) & 2) usleep(1); > return inw(DATA_REG); > } > > int main(int argc, char *argv[]) > { > if(open("/dev/io", O_RDWR, 0) < 0) > { > perror("/dev/io"); > return 1; > } > printf("currently %x\n", ecr_get(0x96)); > ecr_set(0x96, atoi(argv[1])); > return 0; > } > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- ------------------------------------------------------------------- Jason Thaxter Flashlight Media, Inc. jason@flashlightmedia.com www.flashlightmedia.com (212) 334-9378 ------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 10:27: 2 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by hub.freebsd.org (Postfix) with SMTP id 5406C37B423 for ; Mon, 14 May 2001 10:26:55 -0700 (PDT) (envelope-from Gerhard.Sittig@gmx.net) Received: (qmail 4281 invoked by uid 0); 14 May 2001 17:26:53 -0000 Received: from p3ee20a87.dip.t-dialin.net (HELO speedy.gsinet) (62.226.10.135) by mail.gmx.net (mail06) with SMTP; 14 May 2001 17:26:53 -0000 Received: (from sittig@localhost) by speedy.gsinet (8.8.8/8.8.8) id PAA28994 for FreeBSD-mobile@freebsd.org; Mon, 14 May 2001 15:55:44 +0200 Date: Mon, 14 May 2001 15:55:44 +0200 From: Gerhard Sittig To: FreeBSD-mobile@freebsd.org Subject: Re: Thinkpad, moused, and FBSD4.3 Message-ID: <20010514155544.S253@speedy.gsinet> Mail-Followup-To: FreeBSD-mobile@freebsd.org References: <20010511080737.A64524@lunatic.oneinsane.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: ; from tgwilt@suite224.net on Mon, May 14, 2001 at 08:52:40AM -0400 Organization: System Defenestrators Inc. Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, May 14, 2001 at 08:52 -0400, Tom Gwilt wrote: > > Everything works so far - network, XFree with icewm, etc. > Everything except the cut and paste feature of the mouse. > [ ... slight rearrangement by me -- G.S. ... ] > Highlighting text is no problem, but it just won't copy/paste > like a regular mouse does on any other FreeBSD box I use. You do use the second (read: middle) button, don't you? Since that's the paste button. The first (left) one selects, the third (right) one extends the selection. X and DoS button numbering differ in this respect, as you might know. > moused is running in text mode, and the XF86Config file uses > /dev/sysmouse. This should be OK. There have been (not numerous, but many) threads recently. Watch the _protocol_ X expects (I think it should be "MouseSystems" out of /dev/sysmouse, "SysMouse" is said to not always work). virtually yours 82D1 9B9C 01DC 4FB4 D7B4 61BE 3F49 4F77 72DE DA76 Gerhard Sittig true | mail -s "get gpg key" Gerhard.Sittig@gmx.net -- If you don't understand or are scared by any of the above ask your parents or an adult to help you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 14:51:11 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from midget.dons.net.au (daniel.lnk.telstra.net [139.130.137.70]) by hub.freebsd.org (Postfix) with ESMTP id 1BAF537B424 for ; Mon, 14 May 2001 14:51:07 -0700 (PDT) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (root@midget.dons.net.au [203.31.81.7]) by midget.dons.net.au (8.11.3/8.9.3) with ESMTP id f4ELnSN89061; Tue, 15 May 2001 07:19:29 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Message-ID: X-Mailer: XFMail 1.4.7 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Mon, 14 May 2001 16:49:24 -0500 (PET) From: "Daniel O'Connor" To: Dinesh Nair Subject: Re: Modem on laptop... Cc: freebsd-mobile@FreeBSD.ORG, "Richard C." , Kevin Oberman , WATANABE Kiyoshi Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 14-May-2001 Dinesh Nair wrote: > > Do you get hangs if you dialup and hangup a few times? > nope, nothing whatsoever. and scratch my earlier observation of a maximum > 33.6kbps connection. i've gotten speeds in the 50kbps range over the last > few hours. Hmm.. Strange.. Is your modem on a shared IRQ? On mine it is share with the video card, USB, ethernet and carbus bridge.. > one thing i noticed is, if i suspend my compaq armada300, and the plug in > the phone line, the notebook wakes up as if i pressed the wake button. > > :) Heheh :) I would try that, but suspending my laptop nukes my ethernet until I reboot :) --- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 15:10:31 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 5E42637B423 for ; Mon, 14 May 2001 15:10:28 -0700 (PDT) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.3/8.11.1) with ESMTP id f4EMANN24878; Mon, 14 May 2001 16:10:23 -0600 (MDT) (envelope-from imp@harmony.village.org) Message-Id: <200105142210.f4EMANN24878@harmony.village.org> To: "Yu-Fong Cho" Subject: Re: D-Link DFE-660 in FreeBSD 5.0-Current... Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Mon, 14 May 2001 11:39:40 EDT." References: Date: Mon, 14 May 2001 16:10:23 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message "Yu-Fong Cho" writes: : Any idea? Do you have the de/dc driver in your kernel? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 15:11: 1 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 3310737B424 for ; Mon, 14 May 2001 15:11:00 -0700 (PDT) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.3/8.11.1) with ESMTP id f4EMAvN24908; Mon, 14 May 2001 16:10:57 -0600 (MDT) (envelope-from imp@harmony.village.org) Message-Id: <200105142210.f4EMAvN24908@harmony.village.org> To: Gordon Tetlow Subject: Re: how do I eject cards with newcard? Cc: mobile@FreeBSD.ORG In-reply-to: Your message of "Thu, 10 May 2001 01:41:21 PDT." References: Date: Mon, 14 May 2001 16:10:57 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Gordon Tetlow writes: : I'm using newcard (cardbus) and I have a little problem that since pccardd : doesn't start (can't find /dev/card0 (I'm using DEVFS)), I can't really : hot swap pc cards. On the few occasions that I have ripped a card out, : it's not been pretty. My system looks solid. So now that we have newcard, : how do I safely eject pccards? That's not currently implemented. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 16:29: 1 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from sdmail0.sd.bmarts.com (sdmail0.sd.bmarts.com [209.247.77.155]) by hub.freebsd.org (Postfix) with ESMTP id 17F9A37B423; Mon, 14 May 2001 16:28:59 -0700 (PDT) (envelope-from gordont@bluemtn.net) Received: from localhost (gordont@localhost) by sdmail0.sd.bmarts.com (8.11.3/8.11.2/BMA1.1) with ESMTP id f4ENQuO16153; Mon, 14 May 2001 16:26:56 -0700 (PDT) Date: Mon, 14 May 2001 16:26:56 -0700 (PDT) From: Gordon Tetlow X-X-Sender: To: John Baldwin Cc: Subject: Xircom RealPort (was RE: how do I eject cards with newcard?) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 10 May 2001, John Baldwin wrote: > On 10-May-01 Gordon Tetlow wrote: > > I'm using newcard (cardbus) and I have a little problem that since pccardd > > doesn't start (can't find /dev/card0 (I'm using DEVFS)), I can't really > > hot swap pc cards. On the few occasions that I have ripped a card out, > > it's not been pretty. My system looks solid. So now that we have newcard, > > how do I safely eject pccards? > > > > -gordon > > You need to stop using the card before you eject it. For example, if it is a > network adapater, use ifconfig to down the interface. If it's an ata disk, > unmount it, etc. This is rather interesting, I have a multi-function adapter (RBEM56G-100) that does modem (via the sio driver with a patch) and fast ethernet (via the dc driver). I built my kernel without the patch to the sio driver (forgot to reapply it to the source after cvsup) and was able to eject my card fine as long as I wasn't stupid about ejecting the card while using the dc0 interface. Now, if I patch the sio driver source and rebuild my kernel, I can't eject the card or it locks the machine up hard. I realize that this isn't really supported until devd gets written, but is this a bug in the sio driver? or should I just be quiet and bide my time? -gordon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 18:57: 4 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id C0C3237B423; Mon, 14 May 2001 18:57:01 -0700 (PDT) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.3/8.11.1) with ESMTP id f4F1uwN26086; Mon, 14 May 2001 19:56:58 -0600 (MDT) (envelope-from imp@harmony.village.org) Message-Id: <200105150156.f4F1uwN26086@harmony.village.org> To: Gordon Tetlow Subject: Re: Xircom RealPort (was RE: how do I eject cards with newcard?) Cc: John Baldwin , mobile@FreeBSD.ORG In-reply-to: Your message of "Mon, 14 May 2001 16:26:56 PDT." References: Date: Mon, 14 May 2001 19:56:58 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message Gordon Tetlow writes: : I realize that this isn't really supported until devd gets written, but is : this a bug in the sio driver? or should I just be quiet and bide my time? Actually, I think it is a bug in the pccard layer that is dispatching interrupts to the client drivers after the bridge has notified it that the card is gone. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 19:48:10 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns2.alphaque.com (ns2.alphaque.com [202.185.254.11]) by hub.freebsd.org (Postfix) with SMTP id 6454237B42C for ; Mon, 14 May 2001 19:48:07 -0700 (PDT) (envelope-from dinesh@alphaque.com) Received: (qmail 1673 invoked from network); 15 May 2001 02:48:04 -0000 Received: from ns2.alphaque.com (HELO prophet.alphaque.com) (202.185.254.11) by ns2.alphaque.com with SMTP; 15 May 2001 02:48:04 -0000 Received: from localhost (yuzaac@localhost [127.0.0.1]) by prophet.alphaque.com (8.11.3/8.11.3) with ESMTP id f4F2arJ00943; Tue, 15 May 2001 10:36:53 +0800 (MYT) (envelope-from dinesh@alphaque.com) Date: Tue, 15 May 2001 10:36:53 +0800 (MYT) From: Dinesh Nair To: "Daniel O'Connor" Cc: freebsd-mobile@FreeBSD.ORG, "Richard C." , Kevin Oberman , WATANABE Kiyoshi Subject: Re: Modem on laptop... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 14 May 2001, Daniel O'Connor wrote: > Is your modem on a shared IRQ? On mine it is share with the video card, USB, > ethernet and carbus bridge.. same here. --dinesh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Mon May 14 21:18:31 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mailout1-1.nyroc.rr.com (mailout1-1.nyroc.rr.com [24.92.226.146]) by hub.freebsd.org (Postfix) with ESMTP id 8A09A37B42C for ; Mon, 14 May 2001 21:18:28 -0700 (PDT) (envelope-from yfcho@ms9.hinet.net) Received: from YuFongWork (roc-66-24-100-50.rochester.rr.com [66.24.100.50]) by mailout1-1.nyroc.rr.com (8.11.2/RoadRunner 1.03) with SMTP id f4F4Ga024428; Tue, 15 May 2001 00:16:36 -0400 (EDT) From: "Yu-Fong Cho" To: "Warner Losh" Cc: Subject: RE: D-Link DFE-660 in FreeBSD 5.0-Current... Date: Tue, 15 May 2001 00:19:52 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 In-Reply-To: <200105142210.f4EMANN24878@harmony.village.org> Importance: Normal Disposition-Notification-To: "Yu-Fong Cho" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You are right... I forgot D-Link DFE-660 is compatible with Intel 21143 Ethernet card, so I disable dc driver when I compiled the kernel... :-( Thanks Yu-Fong Cho --- Love is life. Easy to start. Hard to finish. -----Original Message----- From: owner-freebsd-mobile@FreeBSD.ORG [mailto:owner-freebsd-mobile@FreeBSD.ORG]On Behalf Of Warner Losh Sent: Monday, May 14, 2001 6:10 PM To: Yu-Fong Cho Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: D-Link DFE-660 in FreeBSD 5.0-Current... In message "Yu-Fong Cho" writes: : Any idea? Do you have the de/dc driver in your kernel? Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue May 15 17:10:19 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 4115637B422 for ; Tue, 15 May 2001 17:10:15 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id UAA08584 for mobile@freebsd.org; Tue, 15 May 2001 20:10:14 -0400 (EDT) (envelope-from mwlucas) Date: Tue, 15 May 2001 20:10:14 -0400 From: Michael Lucas To: mobile@freebsd.org Subject: install on Toshiba 2800-S201? Message-ID: <20010515201014.A8565@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, folks, Does anyone have 4.3 running on $SUBJECT? For me, it hangs after detecting one pci bus. Any suggestions? -- Michael Lucas mwlucas@blackhelicopters.org http://www.blackhelicopters.org/~mwlucas/ Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue May 15 17:45:22 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from granger.centurytel.net (granger.centurytel.net [209.142.136.117]) by hub.freebsd.org (Postfix) with ESMTP id 37E0E37B422 for ; Tue, 15 May 2001 17:45:20 -0700 (PDT) (envelope-from lambert@os2warp.org) Received: from laptop.os2warp.org (pppoe0104.spt.centurytel.net [64.91.29.105]) by granger.centurytel.net (8.11.1/8.11.1) with ESMTP id f4G0jIR22126 for ; Tue, 15 May 2001 19:45:19 -0500 (CDT) Received: by laptop.os2warp.org (Postfix, from userid 1000) id 87FD228B2B; Tue, 15 May 2001 19:45:18 -0500 (CDT) Date: Tue, 15 May 2001 19:45:18 -0500 From: Scott Lambert To: freebsd-mobile@freebsd.org Subject: Re: install on Toshiba 2800-S201? Message-ID: <20010515194518.A17122@laptop.os2warp.org> Reply-To: freebsd-mobile@freebsd.org Mail-Followup-To: Scott Lambert , freebsd-mobile@freebsd.org References: <20010515201014.A8565@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010515201014.A8565@blackhelicopters.org>; from mwlucas@blackhelicopters.org on Tue, May 15, 2001 at 08:10:14PM -0400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I was going to say "yes", but I just realized that mine is a 2805-S201. But mine works wonderfully. If I remember right, there isn't much difference between these series. On Tue, May 15, 2001 at 08:10:14PM -0400, Michael Lucas wrote: > Hi, folks, > > Does anyone have 4.3 running on $SUBJECT? > > For me, it hangs after detecting one pci bus. > > Any suggestions? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue May 15 18:29: 5 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id C5E6137B423 for ; Tue, 15 May 2001 18:29:01 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id VAA08823 for mobile@freebsd.org; Tue, 15 May 2001 21:29:01 -0400 (EDT) (envelope-from mwlucas) Date: Tue, 15 May 2001 21:29:01 -0400 From: Michael Lucas To: mobile@freebsd.org Subject: shared interrupts? Message-ID: <20010515212900.A8789@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, in searching the archives and checking the Windows Device Manager, I think I've found an answer (or, at least, defined a problem) on installing on a Toshiba 2800-S201. Dang near everything is tied to IRQ 11. The following is what I've gleaned from reading the archives. I'd appreciate a sanity check. a) This is "interrupt routing" b) It should work under NEWCARD. NEWCARD isn't a problem -- the system has a built-in Ethernet, so I won't be bouncing cards in and out. Plus, 5.0 is what I'm supposedly documenting. As it stands, the system hangs when probing an Intel BX440 chip. Could this be the cause of my grief? It does this on a recent 5.0, 4.3, and 3.5. I'd appreciate any corrections, suggestions, or opinions. Thanks, Michael -- Michael Lucas mwlucas@blackhelicopters.org http://www.blackhelicopters.org/~mwlucas/ Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Tue May 15 23:48:27 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from harmony.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 71AF537B422 for ; Tue, 15 May 2001 23:48:25 -0700 (PDT) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.11.3/8.11.1) with ESMTP id f4G6mMN76592; Wed, 16 May 2001 00:48:22 -0600 (MDT) (envelope-from imp@harmony.village.org) Message-Id: <200105160648.f4G6mMN76592@harmony.village.org> To: Michael Lucas Subject: Re: shared interrupts? Cc: mobile@FreeBSD.ORG In-reply-to: Your message of "Tue, 15 May 2001 21:29:01 EDT." <20010515212900.A8789@blackhelicopters.org> References: <20010515212900.A8789@blackhelicopters.org> Date: Wed, 16 May 2001 00:48:22 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In message <20010515212900.A8789@blackhelicopters.org> Michael Lucas writes: : Dang near everything is tied to IRQ 11. Yup. Newer PCs do that. : a) This is "interrupt routing" Basically. : b) It should work under NEWCARD. Likely. : As it stands, the system hangs when probing an Intel BX440 chip. : Could this be the cause of my grief? It does this on a recent 5.0, : 4.3, and 3.5. : : I'd appreciate any corrections, suggestions, or opinions. A more complete dmesg would be useful. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 8:22:16 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from melete.ch.intel.com (chfdns02.ch.intel.com [143.182.246.25]) by hub.freebsd.org (Postfix) with ESMTP id 166D137B423 for ; Wed, 16 May 2001 08:22:12 -0700 (PDT) (envelope-from jreynold@sedona.ch.intel.com) Received: from sedona.intel.com (sedona.ch.intel.com [143.182.218.21]) by melete.ch.intel.com (8.9.1a+p1/8.9.1/d: relay.m4,v 1.38 2001/05/09 12:49:45 root Exp $) with ESMTP id PAA04890; Wed, 16 May 2001 15:21:51 GMT Received: from hip186.ch.intel.com (hip186.ch.intel.com [143.182.225.68]) by sedona.intel.com (8.9.1a/8.9.1/d: sendmail.cf,v 1.14 2001/01/02 18:39:59 steved Exp $) with ESMTP id IAA28718; Wed, 16 May 2001 08:21:51 -0700 (MST) X-Envelope-From: jreynold@sedona.ch.intel.com Received: (from jreynold@localhost) by hip186.ch.intel.com (8.9.1a/8.9.1/d: client.m4,v 1.3 1998/09/29 16:36:11 sedayao Exp sedayao $) id LAA29216; Wed, 16 May 2001 11:21:50 -0400 (EDT) X-Authentication-Warning: hip186.ch.intel.com: jreynold set sender to jreynold@sedona.ch.intel.com using -f From: John Reynolds~ MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15106.39670.95407.336899@hip186.ch.intel.com> Date: Wed, 16 May 2001 08:21:26 -0700 To: Michael Lucas Cc: mobile@FreeBSD.ORG Subject: Re: install on Toshiba 2800-S201? In-Reply-To: <20010515201014.A8565@blackhelicopters.org> References: <20010515201014.A8565@blackhelicopters.org> X-Mailer: VM 6.92 under Emacs 20.7.2 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [ On Tuesday, May 15, Michael Lucas wrote: ] > Hi, folks, > > Does anyone have 4.3 running on $SUBJECT? > > For me, it hangs after detecting one pci bus. > > Any suggestions? > do you have any PCMCIA (pccard) cards inserted while booting? If so, take them out and try again. If it doesn't hang, then you might need to adjust the irq value for the pcic device. -Jr -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | John Reynolds WCCG, CCE, (space for rent, cheap!) | | Intel Corporation MS: CH6-210 Phone: 480-554-9092 pgr: 602-868-6512 | | jreynold@sedona.ch.intel.com http://www-aec.ch.intel.com/~jreynold/ | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 8:32:54 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mgw-dax1.ext.nokia.com (mgw-dax1.ext.nokia.com [63.78.179.216]) by hub.freebsd.org (Postfix) with ESMTP id 234E837B422 for ; Wed, 16 May 2001 08:32:52 -0700 (PDT) (envelope-from Craig.Burlingame@nokia.com) Received: from davir02nok.americas.nokia.com (davir02nok.americas.nokia.com [172.18.242.85]) by mgw-dax1.ext.nokia.com (Switch-2.1.0/Switch-2.1.0) with ESMTP id f4GFWwQ15171 for ; Wed, 16 May 2001 10:32:58 -0500 (CDT) Received: from daebh01nok.americas.nokia.com (unverified) by davir02nok.americas.nokia.com (Content Technologies SMTPRS 4.2.1) with ESMTP id for ; Wed, 16 May 2001 10:32:51 -0500 Received: by daebh01nok with Internet Mail Service (5.5.2652.78) id ; Wed, 16 May 2001 10:32:51 -0500 Message-ID: From: Craig.Burlingame@nokia.com To: mobile@freebsd.org Subject: Toshiba Tecra 8000 Date: Wed, 16 May 2001 10:32:49 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2652.78) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org To All; Forgive me if this has been hashed out before, but I am have just joined this group. I have a Toshiba Tecra 8000 that I would like to install FreeBSD 4.3 onto. I have installed it once, but found that it did not recognize my 3Com PCMCIA card (I have both a 3Com Fast EtherLink XL [3C575-TX] and a 3Com Megahertz [3CCFE575BT] card). I was hoping somebody had a definitive document that explains how to get the PCMCIA cards working. I had no problem installing it on my server (Compaq Prolinea with 3Com cards). I greatly appreciate any help or pointers sent my way. Craig To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 9:19:49 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from jacinto.yi.org (dsl-64-34-174-133.telocity.com [64.34.174.133]) by hub.freebsd.org (Postfix) with ESMTP id 1ABCB37B422 for ; Wed, 16 May 2001 09:19:47 -0700 (PDT) (envelope-from erich@ucsd.edu) Received: from ucsd.edu (palomar [192.168.42.22]) by jacinto.yi.org (8.9.3/8.9.3) with ESMTP id JAA48759; Wed, 16 May 2001 09:17:05 -0700 (PDT) (envelope-from erich@ucsd.edu) Message-ID: <3B02A829.3010105@ucsd.edu> Date: Wed, 16 May 2001 09:17:45 -0700 From: unsafe at any speed User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9+) Gecko/20010515 X-Accept-Language: en MIME-Version: 1.0 To: Craig.Burlingame@nokia.com Cc: mobile@FreeBSD.ORG Subject: Re: Toshiba Tecra 8000 References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Those are cardbus cards, which are not supported in 4.x. They will work in 5.0. You can see /etc/defaults/pccard.conf for a variety of PCMCIA cards that are supported in 4.3. Eric Craig.Burlingame@nokia.com wrote: > To All; > Forgive me if this has been hashed out before, but I am have just joined > this group. I have a Toshiba Tecra 8000 that I would like to install > FreeBSD 4.3 onto. I have installed it once, but found that it did not > recognize my 3Com PCMCIA card (I have both a 3Com Fast EtherLink XL > [3C575-TX] and a 3Com Megahertz [3CCFE575BT] card). I was hoping somebody > had a definitive document that explains how to get the PCMCIA cards working. > I had no problem installing it on my server (Compaq Prolinea with 3Com > cards). > > I greatly appreciate any help or pointers sent my way. > > Craig > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 9:43:14 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 5DB6437B423 for ; Wed, 16 May 2001 09:43:11 -0700 (PDT) (envelope-from oberman@ptavv.es.net) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id f4GGgwc21124; Wed, 16 May 2001 09:42:59 -0700 (PDT) Message-Id: <200105161642.f4GGgwc21124@ptavv.es.net> To: Gareth Williams Cc: Jacob Rhoden , freebsd-mobile@FreeBSD.ORG Subject: Re: Toshiba Tecra 550CDT - PCCARD In-reply-to: Your message of "Mon, 14 May 2001 08:13:37 +0200." <20010514081302.U11010-100000@node0b2a.a2000.nl> Date: Wed, 16 May 2001 09:42:58 -0700 From: "Kevin Oberman" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Date: Mon, 14 May 2001 08:13:37 +0200 (CEST) > From: Gareth Williams > Sender: owner-freebsd-mobile@FreeBSD.ORG > > > This may sound a bit silly, but have you copied pccard.conf from > /etc/defaults to /etc? And this may sound a bit silly, but why would anyone EVER want to copy any file from /etc/defaults to /etc? R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 9:52:59 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from moo.sysabend.org (moo.sysabend.org [63.86.88.201]) by hub.freebsd.org (Postfix) with ESMTP id E79DB37B423 for ; Wed, 16 May 2001 09:52:56 -0700 (PDT) (envelope-from ragnar@sysabend.org) Received: by moo.sysabend.org (Postfix, from userid 1004) id 01692755D; Wed, 16 May 2001 09:54:05 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id F2E011D89; Wed, 16 May 2001 09:54:05 -0700 (PDT) Date: Wed, 16 May 2001 09:54:05 -0700 (PDT) From: Jamie Bowden To: Kevin Oberman Cc: Gareth Williams , Jacob Rhoden , freebsd-mobile@FreeBSD.ORG Subject: Re: Toshiba Tecra 550CDT - PCCARD In-Reply-To: <200105161642.f4GGgwc21124@ptavv.es.net> Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 16 May 2001, Kevin Oberman wrote: :> Date: Mon, 14 May 2001 08:13:37 +0200 (CEST) :> From: Gareth Williams :> Sender: owner-freebsd-mobile@FreeBSD.ORG :> :> :> This may sound a bit silly, but have you copied pccard.conf from :> /etc/defaults to /etc? : :And this may sound a bit silly, but why would anyone EVER want to copy :any file from /etc/defaults to /etc? Copy it to /etc and remove all the but the bits you want to change. When you next upgrade, your system specific changes get left alone. Jamie Bowden -- "It was half way to Rivendell when the drugs began to take hold" Hunter S Tolkien "Fear and Loathing in Barad Dur" Iain Bowen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 10:13:27 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id BD1B737B423 for ; Wed, 16 May 2001 10:13:23 -0700 (PDT) (envelope-from oberman@ptavv.es.net) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id f4GHDGc08332; Wed, 16 May 2001 10:13:16 -0700 (PDT) Message-Id: <200105161713.f4GHDGc08332@ptavv.es.net> To: Jamie Bowden Cc: Gareth Williams , Jacob Rhoden , freebsd-mobile@FreeBSD.ORG Subject: Re: Toshiba Tecra 550CDT - PCCARD In-reply-to: Your message of "Wed, 16 May 2001 09:54:05 PDT." Date: Wed, 16 May 2001 10:13:16 -0700 From: "Kevin Oberman" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Date: Wed, 16 May 2001 09:54:05 -0700 (PDT) > From: Jamie Bowden > Sender: owner-freebsd-mobile@FreeBSD.ORG > > On Wed, 16 May 2001, Kevin Oberman wrote: > > :> Date: Mon, 14 May 2001 08:13:37 +0200 (CEST) > :> From: Gareth Williams > :> Sender: owner-freebsd-mobile@FreeBSD.ORG > :> > :> > :> This may sound a bit silly, but have you copied pccard.conf from > :> /etc/defaults to /etc? > : > :And this may sound a bit silly, but why would anyone EVER want to copy > :any file from /etc/defaults to /etc? > > Copy it to /etc and remove all the but the bits you want to change. When > you next upgrade, your system specific changes get left alone. Yes, this makes sense, I suppose, although it seem rather convoluted to me. Copy the file, delete what stays the same (probably all but 1-20 lines of over 1800) and then edit what's left so that it is all different from the original. With XEmacs or emacs, I'd open both the file in /etc and /etc/defaults and do some minimal copying between buffers. If is was stuck with vi, I'd probably cut and paste between windows to create /etc/pccard.conf. But whatever works for you. But simply copying /etc/defaults/pccard.conf to /etc/pccard.conf makes no sense to me at all. It means that things will not be updated when you cvsup. It means that you have two copies of the file, one of which will be subject to bit rot. And it does not fix anything. FWIW, the pccard.conf on my laptop is one line, "irq 7 9", at this time although I think I need to tweak the memory entry just a bit. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 14:26:36 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mta06-svc.ntlworld.com (mta06-svc.ntlworld.com [62.253.162.46]) by hub.freebsd.org (Postfix) with ESMTP id BBE6937B423 for ; Wed, 16 May 2001 14:26:31 -0700 (PDT) (envelope-from scott.mitchell@mail.com) Received: from lungfish.ntlworld.com ([62.253.146.161]) by mta06-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20010516212628.BPMO285.mta06-svc.ntlworld.com@lungfish.ntlworld.com>; Wed, 16 May 2001 22:26:28 +0100 Received: (from scott@localhost) by lungfish.ntlworld.com (8.8.8/8.8.8) id WAA01497; Wed, 16 May 2001 22:27:23 +0100 (BST) (envelope-from scott) Message-ID: <20010516222722.38753@localhost> Date: Wed, 16 May 2001 22:27:22 +0100 From: Scott Mitchell To: randal@mailrelay.hits.net, Dave Tweten , mobile@FreeBSD.ORG Subject: Re: Xircom Watchdog Time-out Bug References: <200105080410.f484AN070438@gilmore.nas.nasa.gov> <3AFD13D0.15883.1D4F00@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <3AFD13D0.15883.1D4F00@localhost>; from Randal Masutani on Sat, May 12, 2001 at 10:43:28AM -1000 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sat, May 12, 2001 at 10:43:28AM -1000, Randal Masutani wrote: > Dave, > > I have been having the same problem on my VAIO F560 with the Xircom CE3 > card. I have turned on XE_DEBUG in the driver to see whats going on. I > appears to have a problem with Autonegotiation. The driver is not > detecting the PHY chip correctly? It tries at least 6 times before it > detects it and then autonegotiation works okay and then DHCP will get > done. > > Anyone who understands the Autonegotiation process or more on MII PHY > process? This has been the biggest issue with the xe driver for a long time now. I wrote the PHY-handling code to do the same thing as the Linux driver it was ported from, which seemed to match fairly well with the docs I had available. However, it's always had trouble with autonegotiation in some configurations, although I've never worked out what the defining features of those configurations are :-( I might have done more about it, except that the driver works for me on all-but-one of the hubs/switches I've ever plugged it into, from the cheapo Linksys on my desk here to the monster racks of Cisco kit at work, and I no longer have access to the one that didn't work. So, have you tried connecting to a different autonegotiating hub/switch, if you have access to such a beast? How about inserting the card after boot, and manually ifconfig-ing it to force a particular media type? Do you still get bad behaviour in those cases? You may be right that the PHY isn't being detected correctly -- the Xircom docs hint at several different PHYs having been used in the CE3 and RealPort products, but I'm not sure there's a reliable way to tell exactly what you've got... If anyone can point me to some straightforward docs on how make a MII PHY do its autonegotiation thing (they're all supposed to support a common interface, right?), I'd be very happy! Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 15: 1:22 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.dis.org (adsl-64-166-71-242.dsl.sntc01.pacbell.net [64.166.71.242]) by hub.freebsd.org (Postfix) with ESMTP id 6C80737B424 for ; Wed, 16 May 2001 15:01:19 -0700 (PDT) (envelope-from msmith@mass.dis.org) Received: from mass.dis.org (localhost [127.0.0.1]) by mass.dis.org (8.11.3/8.11.3) with ESMTP id f4GLaaB11706; Wed, 16 May 2001 14:36:36 -0700 (PDT) (envelope-from msmith@mass.dis.org) Message-Id: <200105162136.f4GLaaB11706@mass.dis.org> X-Mailer: exmh version 2.1.1 10/15/1999 To: Scott Mitchell Cc: mobile@FreeBSD.ORG Subject: Re: Xircom Watchdog Time-out Bug In-reply-to: Your message of "Wed, 16 May 2001 22:27:22 BST." <20010516222722.38753@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 16 May 2001 14:36:36 -0700 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > If anyone can point me to some straightforward docs on how make a MII PHY > do its autonegotiation thing (they're all supposed to support a common > interface, right?), I'd be very happy! miibus. -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] V I C T O R Y N O T V E N G E A N C E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 16:32:15 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 2998037B423 for ; Wed, 16 May 2001 16:32:11 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id TAA13189 for mobile@freebsd.org; Wed, 16 May 2001 19:32:07 -0400 (EDT) (envelope-from mwlucas) Date: Wed, 16 May 2001 19:32:07 -0400 From: Michael Lucas To: mobile@freebsd.org Subject: dmesg on Toshiba 2800-S201 install Message-ID: <20010516193207.A13157@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello, The following has been painfully copied by hand. It turns out that this Toshiba ships *without*serial*ports*. While I've proofread it, anything that looks really and truly wrong is probably my fault. For those who missed the earlier general complaint-to-the-world: This is a brand new Toshiba that hangs very quickly when trying to install. I'm trying to install -current because a) the FreeBSD book I'm writing is supposed to document 5-stable, and b) because -current supports interrupt routing. (While I'm aware that (b) is a lousy reason, I'm kind of stuck by (a). :( ) Using the -current snapshot from current.freebsd.org, snapshot 5.0-20010507-CURRENT Interestingly, the 20010514-CURRENT snapshot failed to boot entirely; it hung at a single horizontal bar upon inserting the first boot floppy. I do have a second laptop with a hard drive that fits this Toshiba, so I can fairly easily get a custom kernel or what-have-you -- if the blasted thing would just boot. Any suggestions gratefully appreciated. This first is a boot -v; I couldn't hit scroll lock quickly enough to capture the initial output. :( Here's the last screen, however. Using $PIR table, 6 entries at 0xc00f0460 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found -> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x8086, dev=0x7110, revid=0x03 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=11 non -v boot dmesg: avail memory = 57069568 (55732K bytes) Preloaded elf kernel "kernel" at 0xc07c6000. Preloaded mfs_root "/mfsroot" at 0xc07e6084. Pentium Pro MTRR support enabled md0: Preloaded image 4423680 bytes at 0xc03ac638 WARNING: driver mistake: destroy_dev on 154/0 Using $PIR table, 6 entries at 0xc00f0460 npx0 on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard hang... -- Michael Lucas mwlucas@blackhelicopters.org http://www.blackhelicopters.org/~mwlucas/ Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 17:19:52 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 22DC337B422 for ; Wed, 16 May 2001 17:19:50 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id UAA13307 for mobile@freebsd.org; Wed, 16 May 2001 20:19:49 -0400 (EDT) (envelope-from mwlucas) From: Michael Lucas Message-Id: <200105170019.UAA13307@blackhelicopters.org> Subject: Re: dmesg on Toshiba 2800-S201 install In-Reply-To: <20010516193207.A13157@blackhelicopters.org> from Michael Lucas at "May 16, 2001 7:32: 7 pm" To: mobile@freebsd.org Date: Wed, 16 May 2001 20:19:49 -0400 (EDT) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, it's rude to follow up on one's own posts, but I got some more info. It turns out that this system will take a 4.3 load. (It just won't boot off my home-burned 4.3 ISO.) I did a network install, and it seems to work fine. A full boot -v dmesg, in all its tedious detail, is available at: http://blackhelicopters.org/~mwlucas/2800dmesg.43.txt (Call me a fool for fun, but I didn't want to post 278 lines of garbage into the list. :) So, why will this boot on 4.3 but not on -current? Or should I shut up and go away? Any more info desired is available upon request. ==ml -- Michael Lucas mwlucas@blackhelicopters.org http://www.blackhelicopters.org/~mwlucas/ Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 19:10:22 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from femail4.sdc1.sfba.home.com (femail4.sdc1.sfba.home.com [24.0.95.84]) by hub.freebsd.org (Postfix) with ESMTP id 9961337B423 for ; Wed, 16 May 2001 19:10:19 -0700 (PDT) (envelope-from matt@dnai.com) Received: from pinol1.sfba.home.com ([24.1.6.178]) by femail4.sdc1.sfba.home.com (InterMail vM.4.01.03.20 201-229-121-120-20010223) with ESMTP id <20010517020919.TRIH21661.femail4.sdc1.sfba.home.com@pinol1.sfba.home.com> for ; Wed, 16 May 2001 19:09:19 -0700 Received: (from matt@localhost) by pinol1.sfba.home.com (8.11.2/8.11.2) id f4H25iE00646 for freebsd-mobile@Freebsd.org; Wed, 16 May 2001 19:05:44 -0700 (PDT) (envelope-from matt) Date: Wed, 16 May 2001 19:04:48 -0700 From: Matthew David Litwin To: freebsd-mobile@Freebsd.org Subject: Re: Location Scripts for FreeBSD Message-ID: <20010516190448.A586@aurelius.incitatus.com> Mail-Followup-To: freebsd-mobile@Freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, 11 May 2001 08:07:37 -0700 Ron 'The InSaNe One' Rosson wrote > Well I am the maintainer of pccard-site which was originnally written by > Adam Laurie. Its funny in the last couple of days we have had the > following scripts mentioned on this mailing list. > http:/members.home.nl/r.j.h.blacquiere/pccard/index.html > http://www.dnai.com/~matt/locations.html > http://www.freebsd.org/cgi/ports.cgi?query=personality&stype=all > http://www.sdbug.org/download.php (pccard-site) Well, I'm the source of the second item on this list. I've been getting good use out of freebsd for a few years now: seems about time to give something back. So ... > It would be nice to get a colaberation going on all of our scripts and > then get it committed to the ports tree. count me in. Continuing to de-lurk, > Following after Adam my goals are to be able to have pccard-site be > independent of the systems files (no modifying of the systems files) I > have gotten away with this except for a modification to rc.shutdown. my goal was to interfere in the boot process as early as possible, and have the boot proceed with new configuration files linked in. The advantage of this is that its general: you don't have to know which daemon's to restart, etc. Disadvantages: you have to muck with system files (/etc/rc and /etc/defaults/rc.conf) and you have to reboot to change configurations. Parts of my stuff that might be useful elsewhere: 1) A simple, self contained one-level directory choice utility (I have different locations correspond to different directories). 2) A utility to simulate changing a link, for use when / is still mounted read-only (sort of a "readlink A, but pretend B is link to C"). This lets the correct rc.conf be sourced early on. The perl stuff may be a bit too specific to the directory structure I've chosen. > Just thinking out load. Me too, -Matt Litwin matt@dnai.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 22:44:49 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from roam.psg.com (mg-206191146-28.ricochet.net [206.191.146.28]) by hub.freebsd.org (Postfix) with ESMTP id 8003437B424 for ; Wed, 16 May 2001 22:44:46 -0700 (PDT) (envelope-from randy@psg.com) Received: from randy by roam.psg.com with local (Exim 3.22 #1) id 150EzK-0001n9-00 for freebsd-mobile@freebsd.org; Wed, 16 May 2001 21:02:10 -0700 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: FreeBSD Laptoppers Subject: dell c600 oddities Message-Id: Date: Wed, 16 May 2001 21:02:10 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org dell latitude c600 freebsd 4.3-stable xfree86 4.0.3 tvtwm o running X with tvtwm. if i accidentally hit , i am out of X into virt term N. how the heck do i get back to X? o while typing into emacs, the cursor will jump to where the mouse is, although i have not touched the mouse pad, the nipple, ... this is VERY annoying randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 23: 1:26 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from guardian.apnic.net (guardian.apnic.net [203.37.255.100]) by hub.freebsd.org (Postfix) with ESMTP id DB27F37B423 for ; Wed, 16 May 2001 23:01:22 -0700 (PDT) (envelope-from ggm@apnic.net) Received: (from mail@localhost) by guardian.apnic.net (8.9.3/8.9.3) id QAA04951; Thu, 17 May 2001 16:01:12 +1000 (EST) Received: from hadrian.staff.apnic.net(192.168.1.1) by int-gw.staff.apnic.net via smap (V2.1) id xma004941; Thu, 17 May 01 16:01:03 +1000 Received: from apnic.net (localhost [127.0.0.1]) by hadrian.staff.apnic.net (8.9.3/8.9.3) with ESMTP id QAA00868; Thu, 17 May 2001 16:00:58 +1000 (EST) X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: Randy Bush Cc: FreeBSD Laptoppers Subject: Re: dell c600 oddities In-Reply-To: Message from Randy Bush of "Wed, 16 May 2001 21:02:10 MST." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 17 May 2001 16:00:58 +1000 Message-ID: <866.990079258@apnic.net> From: George Michaelson Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > dell latitude c600 > freebsd 4.3-stable > xfree86 4.0.3 > tvtwm > > o running X with tvtwm. if i accidentally hit , i am > out of X into virt term N. how the heck do i get back to X? > its on f9 for me on a c400. I don't know why its gone so far beyond the 4 getty. > o while typing into emacs, the cursor will jump to where the mouse is, > although i have not touched the mouse pad, the nipple, ... this is > VERY annoying > not on a c400. but I have external mouse most of the time. There are BIOS settings about mouse interaction on the c400. cheers -George To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 23: 7:45 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from casimir.physics.purdue.edu (casimir.physics.purdue.edu [128.210.146.111]) by hub.freebsd.org (Postfix) with ESMTP id C228837B422 for ; Wed, 16 May 2001 23:07:43 -0700 (PDT) (envelope-from will@physics.purdue.edu) Received: by casimir.physics.purdue.edu (Postfix, from userid 1000) id 7457218A47; Thu, 17 May 2001 01:07:36 -0500 (EST) Date: Thu, 17 May 2001 01:07:36 -0500 From: Will Andrews To: George Michaelson Cc: Randy Bush , FreeBSD Laptoppers Subject: Re: dell c600 oddities Message-ID: <20010517010736.B26877@casimir.physics.purdue.edu> Reply-To: Will Andrews References: <866.990079258@apnic.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <866.990079258@apnic.net>; from ggm@apnic.net on Thu, May 17, 2001 at 04:00:58PM +1000 X-Operating-System: Linux 2.2.18 sparc64 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, May 17, 2001 at 04:00:58PM +1000, George Michaelson wrote: > > o running X with tvtwm. if i accidentally hit , i am > > out of X into virt term N. how the heck do i get back to X? > > > > its on f9 for me on a c400. I don't know why its gone so far beyond the 4 > getty. Er, this is nothing new. You get back into X by alt-FN, where N is the designated tty for X as specified in /etc/ttys. -- wca To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Wed May 16 23:45:10 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by hub.freebsd.org (Postfix) with ESMTP id C9CC237B422; Wed, 16 May 2001 23:45:06 -0700 (PDT) (envelope-from randy@psg.com) Received: from randy by rip.psg.com with local (Exim 3.16 #1) id 150HX0-0006vq-00; Wed, 16 May 2001 23:45:06 -0700 From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Mike Smith Cc: FreeBSD Laptoppers Subject: Re: dell c600 oddities References: <200105170554.f4H5sbZ01347@mass.dis.org> Message-Id: Date: Wed, 16 May 2001 23:45:06 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> o running X with tvtwm. if i accidentally hit , i am >> out of X into virt term N. how the heck do i get back to X? > alt-ctrl-F9, since X by default runs on the first vty that doesn't have a > getty on it. thank you! >> o while typing into emacs, the cursor will jump to where the mouse is, >> although i have not touched the mouse pad, the nipple, ... this is >> VERY annoying > You're hitting it with your thumbs or the side of your fingers. nope. i have had someone watch my hands while it happened. repeatedly. randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 0: 3:27 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.dis.org (mass.dis.org [216.240.45.41]) by hub.freebsd.org (Postfix) with ESMTP id 28C5237B42C for ; Thu, 17 May 2001 00:03:23 -0700 (PDT) (envelope-from msmith@mass.dis.org) Received: from mass.dis.org (localhost [127.0.0.1]) by mass.dis.org (8.11.3/8.11.3) with ESMTP id f4H5sbZ01347; Wed, 16 May 2001 22:54:38 -0700 (PDT) (envelope-from msmith@mass.dis.org) Message-Id: <200105170554.f4H5sbZ01347@mass.dis.org> X-Mailer: exmh version 2.1.1 10/15/1999 To: Randy Bush Cc: FreeBSD Laptoppers Subject: Re: dell c600 oddities In-reply-to: Your message of "Wed, 16 May 2001 21:02:10 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 16 May 2001 22:54:36 -0700 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > dell latitude c600 > freebsd 4.3-stable > xfree86 4.0.3 > tvtwm > > o running X with tvtwm. if i accidentally hit , i am > out of X into virt term N. how the heck do i get back to X? alt-ctrl-F9, since X by default runs on the first vty that doesn't have a getty on it. > o while typing into emacs, the cursor will jump to where the mouse is, > although i have not touched the mouse pad, the nipple, ... this is > VERY annoying You're hitting it with your thumbs or the side of your fingers. One of the major drawbacks of the Dell touchpads is that they're quite sensitive (this happens to me all the time, it irritates me too). -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] V I C T O R Y N O T V E N G E A N C E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 0: 9: 0 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mass.dis.org (mass.dis.org [216.240.45.41]) by hub.freebsd.org (Postfix) with ESMTP id 35C6D37B422 for ; Thu, 17 May 2001 00:08:57 -0700 (PDT) (envelope-from msmith@mass.dis.org) Received: from mass.dis.org (localhost [127.0.0.1]) by mass.dis.org (8.11.3/8.11.3) with ESMTP id f4H7G4E00721; Thu, 17 May 2001 00:16:04 -0700 (PDT) (envelope-from msmith@mass.dis.org) Message-Id: <200105170716.f4H7G4E00721@mass.dis.org> X-Mailer: exmh version 2.1.1 10/15/1999 To: Randy Bush Cc: FreeBSD Laptoppers Subject: Re: dell c600 oddities In-reply-to: Your message of "Wed, 16 May 2001 23:45:06 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 17 May 2001 00:16:04 -0700 From: Mike Smith Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > >> o while typing into emacs, the cursor will jump to where the mouse is, > >> although i have not touched the mouse pad, the nipple, ... this is > >> VERY annoying > > You're hitting it with your thumbs or the side of your fingers. > > nope. i have had someone watch my hands while it happened. repeatedly. Then it's either dust/dirt on the touchpad, or you've managed to find a resonant frequency. When this started happening to me, I was so pissed off that I added debugging output to the ps/2 driver - the touchpad is definitely generating click events. We don't, unfortunately, have any sort of control app for the Synaptics pad. You might want to go look and see if the Linux folks do; it'd be a relatively simple thing to port, and I think that one of the tunable parameters is touch sensitivity. -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] V I C T O R Y N O T V E N G E A N C E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 8: 6:42 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mgw-dax1.ext.nokia.com (mgw-dax1.ext.nokia.com [63.78.179.216]) by hub.freebsd.org (Postfix) with ESMTP id 942CB37B422 for ; Thu, 17 May 2001 08:06:40 -0700 (PDT) (envelope-from Craig.Burlingame@nokia.com) Received: from davir01nok.americas.nokia.com (davir01nok.americas.nokia.com [172.18.242.84]) by mgw-dax1.ext.nokia.com (Switch-2.1.0/Switch-2.1.0) with ESMTP id f4HF6k017250 for ; Thu, 17 May 2001 10:06:47 -0500 (CDT) Received: from daebh02nok.americas.nokia.com (unverified) by davir01nok.americas.nokia.com (Content Technologies SMTPRS 4.2.1) with ESMTP id for ; Thu, 17 May 2001 10:05:50 -0500 Received: by daebh02nok with Internet Mail Service (5.5.2652.78) id ; Thu, 17 May 2001 10:05:50 -0500 Message-ID: From: Craig.Burlingame@nokia.com To: mobile@freebsd.org Subject: NetGear FA410TXC Date: Thu, 17 May 2001 10:05:49 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2652.78) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org If there is anyone out there running FreeBSD v4.x on a laptop using the NetGear FA410TXC card, could you please send me your /etc/pccard.conf file? I have been trying to get it working and while it boots up and says there is a card in slot 1, I can't seem to get the right conf file settings. Thanks in advance, Craig To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 10: 7: 8 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from EM550.home.com (a24b161n147client49.hawaii.rr.com [24.161.147.49]) by hub.freebsd.org (Postfix) with ESMTP id 7177137B422 for ; Thu, 17 May 2001 10:07:05 -0700 (PDT) (envelope-from randal@mailrelay.hits.net) Received: from vaio (h105.home.com [10.0.0.105]) by EM550.home.com (8.11.3/8.11.3) with ESMTP id f4HGwhV00425; Thu, 17 May 2001 06:58:43 -1000 (HST) (envelope-from randal@mailrelay.hits.net) From: "Randal Masutani" To: Scott Mitchell , randal@mailrelay.hits.net, Dave Tweten , mobile@FreeBSD.ORG Date: Thu, 17 May 2001 01:10:05 -1000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: Xircom Watchdog Time-out Bug Reply-To: randal@mailrelay.hits.net Message-ID: <3B0324ED.28683.358E3A@localhost> In-reply-to: <20010516222722.38753@localhost> References: <3AFD13D0.15883.1D4F00@localhost>; from Randal Masutani on Sat, May 12, 2001 at 10:43:28AM -1000 X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 16 May 2001, at 22:27, Scott Mitchell wrote: > On Sat, May 12, 2001 at 10:43:28AM -1000, Randal Masutani wrote: > > Dave, > > > > I have been having the same problem on my VAIO F560 with the Xircom CE3 > > card. I have turned on XE_DEBUG in the driver to see whats going on. I > > appears to have a problem with Autonegotiation. The driver is not > > detecting the PHY chip correctly? It tries at least 6 times before it > > detects it and then autonegotiation works okay and then DHCP will get > > done. > > > > Anyone who understands the Autonegotiation process or more on MII PHY > > process? > > This has been the biggest issue with the xe driver for a long time now. I > wrote the PHY-handling code to do the same thing as the Linux driver it was > ported from, which seemed to match fairly well with the docs I had > available. However, it's always had trouble with autonegotiation in some > configurations, although I've never worked out what the defining features > of those configurations are :-( > > I might have done more about it, except that the driver works for me on > all-but-one of the hubs/switches I've ever plugged it into, from the cheapo > Linksys on my desk here to the monster racks of Cisco kit at work, and I no > longer have access to the one that didn't work. > > So, have you tried connecting to a different autonegotiating hub/switch, if > you have access to such a beast? How about inserting the card after boot, > and manually ifconfig-ing it to force a particular media type? Do you > still get bad behaviour in those cases? Yes, I have tried different hub/switches. I always get a time-out but sometimes only one and at other times many. Yes, I eventually get it to work most times after removing and reinserting the card. Forcing it to a particular type didn't seem to work to well. > > You may be right that the PHY isn't being detected correctly -- the Xircom > docs hint at several different PHYs having been used in the CE3 and > RealPort products, but I'm not sure there's a reliable way to tell exactly > what you've got... From what I gather from the debug statements it appears that it is not reading the PHY status (BMSR register) properly, since it is getting back a 0 (null) result. Maybe there is not enough delay or wait states between reading or writing to the PHY registers? I have looked at the source code and also source from the Linux driver and the sdk kit from Xircom, they all are a little different in the procedure on how to read and write data to the MII registers. Randal To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 13:14:34 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from InterJet.dellroad.org (adsl-63-194-81-26.dsl.snfc21.pacbell.net [63.194.81.26]) by hub.freebsd.org (Postfix) with ESMTP id 3EB3337B423 for ; Thu, 17 May 2001 13:14:31 -0700 (PDT) (envelope-from archie@dellroad.org) Received: from arch20m.dellroad.org (arch20m.dellroad.org [10.1.1.20]) by InterJet.dellroad.org (8.9.1a/8.9.1) with ESMTP id NAA73408; Thu, 17 May 2001 13:14:30 -0700 (PDT) Received: (from archie@localhost) by arch20m.dellroad.org (8.11.3/8.11.3) id f4HKDjv76693; Thu, 17 May 2001 13:13:45 -0700 (PDT) (envelope-from archie) From: Archie Cobbs Message-Id: <200105172013.f4HKDjv76693@arch20m.dellroad.org> Subject: Re: NetGear FA410TXC In-Reply-To: "from Craig.Burlingame@nokia.com at May 17, 2001 10:05:49 am" To: Craig.Burlingame@nokia.com Date: Thu, 17 May 2001 13:13:45 -0700 (PDT) Cc: mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL82 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Craig.Burlingame@nokia.com writes: > If there is anyone out there running FreeBSD v4.x on a laptop using the > NetGear FA410TXC card, could you please send me your /etc/pccard.conf file? > I have been trying to get it working and while it boots up and says there is > a card in slot 1, I can't seem to get the right conf file settings. I think this is the card where you have to run fa_select first.. ? Search the archives for 'fa_select'.. -Archie __________________________________________________________________________ Archie Cobbs * Packet Design * http://www.packetdesign.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 15:28: 4 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from lunatic.oneinsane.net (lunatic.oneinsane.net [66.42.61.27]) by hub.freebsd.org (Postfix) with ESMTP id 47A6237B422 for ; Thu, 17 May 2001 15:28:01 -0700 (PDT) (envelope-from insane@lunatic.oneinsane.net) Received: by lunatic.oneinsane.net (Postfix, from userid 1000) id 7CB271555F; Thu, 17 May 2001 15:28:00 -0700 (PDT) Date: Thu, 17 May 2001 15:28:00 -0700 From: Ron 'The InSaNe One' Rosson To: freebsd-mobile@freebsd.org Subject: Re: NetGear FA410TXC Message-ID: <20010517152800.A792@lunatic.oneinsane.net> Reply-To: Ron Rosson Mail-Followup-To: freebsd-mobile@freebsd.org References: <200105172013.f4HKDjv76693@arch20m.dellroad.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200105172013.f4HKDjv76693@arch20m.dellroad.org>; from archie@dellroad.org on Thu, May 17, 2001 at 01:13:45PM -0700 X-Operating-System: FreeBSD lunatic.oneinsane.net 4.3-STABLE X-Moon: The Moon is Waning Crescent (27% of Full) X-Opinion: What you read here is my IMHO X-WWW: http://www.oneinsane.net X-GPG-FINGERPRINT: 3F11 DB43 F080 C037 96F0 F8D3 5BD2 652B 171C 86DB X-Uptime: 3:27PM up 14 days, 6:59, 1 user, load averages: 0.11, 0.17, 0.08 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: X-Loop: FreeBSD.org Archie Cobbs (archie@dellroad.org) wrote: > Craig.Burlingame@nokia.com writes: > > If there is anyone out there running FreeBSD v4.x on a laptop using the > > NetGear FA410TXC card, could you please send me your /etc/pccard.conf file? > > I have been trying to get it working and while it boots up and says there is > > a card in slot 1, I can't seem to get the right conf file settings. > > I think this is the card where you have to run fa_select first.. ? > Search the archives for 'fa_select'.. > I have a link to it at http://www.sdbug.org/download.php. -- ------------------------------------------------------------------------------ Ron Rosson ... and a UNIX user said ... The InSaNe One rm -rf * insane@oneinsane.net and all was /dev/null and *void() ------------------------------------------------------------------------------ I started out with nothing and I still have most of it left To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 15:48:29 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from critter.freebsd.dk (critter.freebsd.dk [212.242.86.163]) by hub.freebsd.org (Postfix) with ESMTP id D3ED837B424 for ; Thu, 17 May 2001 15:48:26 -0700 (PDT) (envelope-from phk@critter.freebsd.dk) Received: from critter (localhost [127.0.0.1]) by critter.freebsd.dk (8.11.3/8.11.3) with ESMTP id f4HBHhL12386; Thu, 17 May 2001 13:17:43 +0200 (CEST) (envelope-from phk@critter.freebsd.dk) To: "Daniel O'Connor" Cc: Dinesh Nair , WATANABE Kiyoshi , Kevin Oberman , "Richard C." , freebsd-mobile@FreeBSD.ORG Subject: Re: Modem on laptop... In-Reply-To: Your message of "Sun, 13 May 2001 19:56:55 CDT." Date: Thu, 17 May 2001 13:17:43 +0200 Message-ID: <12384.990098263@critter> From: Poul-Henning Kamp Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: X-Loop: FreeBSD.org Question: What is the copyright on the binary object file from the Linux version ? Would it be allowed to include it like the other binary drivers in src/sys/contrib/dev/* as a uuencode file ? If so we should commit this driver to the tree... -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 phk@FreeBSD.ORG | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 17: 4:15 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from midgard.dhs.org (dhcp065-024-189-179.columbus.rr.com [65.24.189.179]) by hub.freebsd.org (Postfix) with ESMTP id 0F21B37B423 for ; Thu, 17 May 2001 17:04:12 -0700 (PDT) (envelope-from caa@midgard.dhs.org) Received: (from caa@localhost) by midgard.dhs.org (8.11.3/8.11.3) id f4I045D73593 for freebsd-mobile@FreeBSD.ORG; Thu, 17 May 2001 20:04:05 -0400 (EDT) (envelope-from caa) Date: Thu, 17 May 2001 20:04:05 -0400 From: Charles Anderson To: freebsd-mobile@FreeBSD.ORG Subject: Re: CompactFlash with PCMCIA adaptor on ThinkPad 600 Message-ID: <20010517200405.A73564@midgard.dhs.org> Mail-Followup-To: freebsd-mobile@FreeBSD.ORG References: <20010412025329.A598@thinksec.com> <200104140608.f3E68QL24859@lavender.sanpei.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200104140608.f3E68QL24859@lavender.sanpei.org>; from sanpei@sanpei.org on Sat, Apr 14, 2001 at 03:08:26PM +0900 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: X-Loop: FreeBSD.org I find that this patch is neccesary to get my microdrive to work on my 600x under 4.3 release. -Charlie On Sat, Apr 14, 2001 at 03:08:26PM +0900, MIHIRA Yoshiro wrote: > terje@elde.net wrote: > > >> The hardware I've got to work with is a ThinkPad 600, which I know to work > >> great with my 3com network card, as well as a "Billionton Compact Ata Adaptor" > >> also known as "Billionton Compact Flash Adapter". The CompactFlash module is > >> a TwinMOS 16MB module. > >> > >> When inserting the card the insertion is successfully detected, but not much > >> useful information is returned: > >> > >> Apr 12 02:46:00 tiger /kernel: pccard: card inserted, slot 1 > >> Apr 12 02:46:03 tiger pccardd[172]: No card in database for "(null)"("(null)") > >> Apr 12 02:46:03 tiger /kernel: Apr 12 02:46:03 tiger pccardd[172]: No card in database for "(null)"("(null)") > >> Apr 12 02:49:30 tiger /kernel: pccard: card removed, slot 1 > >> > >> pccardc dumpcis doesn't return much helpful either: > >> > >> Configuration data for card in slot 1 > >> Tuple #1, code = 0xff (Terminator), length = 0 > >> 2 slots found > >> > >> As I mentioned I'm all out of ideas now, and would really appreciate it if > >> anyone could nudge me in the right direction so I can get the hardware up and > >> running. > > I also had ThinkPad600, and I had same problem. > > Some Compact Flash are only supported 3.3V, but pccard/pcic code for > I82365 in 4-stable was not supported 3.3V. (Because original Intel 82365 > does not support 3.3V mode). > > Please try below quick hack patch, I could use Compact Flash with > ThinkPad600. > > http://home.jp.FreeBSD.org/~sanpei/5-current/sys-pccard-pcic.c-ThinkPad600-20000827.diff > > # sorry this patch is for 5-current.... If you miss it to patch, > # tell me your OS version. > > -sanpei > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Charles Anderson caa@columbus.rr.com No quote, no nothin' To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 18:38:25 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 2BBD437B43E for ; Thu, 17 May 2001 18:38:22 -0700 (PDT) (envelope-from imp@billy-club.village.org) Received: from billy-club.village.org (billy-club.village.org [10.0.0.3]) by rover.village.org (8.11.3/8.11.3) with ESMTP id f4I1cK633307; Thu, 17 May 2001 19:38:20 -0600 (MDT) (envelope-from imp@billy-club.village.org) Received: from billy-club.village.org (localhost [127.0.0.1]) by billy-club.village.org (8.11.2/8.8.3) with ESMTP id f4I1b0l07050; Thu, 17 May 2001 19:37:00 -0600 (MDT) Message-Id: <200105180137.f4I1b0l07050@billy-club.village.org> To: "Kevin Oberman" Subject: Re: Toshiba Tecra 550CDT - PCCARD Cc: Gareth Williams , Jacob Rhoden , freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Wed, 16 May 2001 09:42:58 PDT." <200105161642.f4GGgwc21124@ptavv.es.net> References: <200105161642.f4GGgwc21124@ptavv.es.net> Date: Thu, 17 May 2001 19:37:00 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: X-Loop: FreeBSD.org In message <200105161642.f4GGgwc21124@ptavv.es.net> "Kevin Oberman" writes: : > This may sound a bit silly, but have you copied pccard.conf from : > /etc/defaults to /etc? : : And this may sound a bit silly, but why would anyone EVER want to copy : any file from /etc/defaults to /etc? You *NEVER* want to do that with /etc/pccard.conf. You just want to have the few lines that override things. I think you hit an infininte recursion case if you do. Here's my /etc/pccard.conf: irq 10 11 And the rest of the defaults work well for my desktop. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Thu May 17 18:41:59 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from rover.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id 77EF237B42C for ; Thu, 17 May 2001 18:41:57 -0700 (PDT) (envelope-from imp@billy-club.village.org) Received: from billy-club.village.org (billy-club.village.org [10.0.0.3]) by rover.village.org (8.11.3/8.11.3) with ESMTP id f4I1fu633341; Thu, 17 May 2001 19:41:56 -0600 (MDT) (envelope-from imp@billy-club.village.org) Received: from billy-club.village.org (localhost [127.0.0.1]) by billy-club.village.org (8.11.2/8.8.3) with ESMTP id f4I1efl07070; Thu, 17 May 2001 19:40:41 -0600 (MDT) Message-Id: <200105180140.f4I1efl07070@billy-club.village.org> To: Charles Anderson Subject: Re: CompactFlash with PCMCIA adaptor on ThinkPad 600 Cc: freebsd-mobile@FreeBSD.ORG In-reply-to: Your message of "Thu, 17 May 2001 20:04:05 EDT." <20010517200405.A73564@midgard.dhs.org> References: <20010517200405.A73564@midgard.dhs.org> <20010412025329.A598@thinksec.com> <200104140608.f3E68QL24859@lavender.sanpei.org> Date: Thu, 17 May 2001 19:40:41 -0600 From: Warner Losh Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: X-Loop: FreeBSD.org In message <20010517200405.A73564@midgard.dhs.org> Charles Anderson writes: : I find that this patch is neccesary to get my microdrive to work on my 600x : under 4.3 release. I've applied this patch to current and it will be MFC's before the next release. Nakagawa-san published additional patches in FreeBSD Press number 4 that look interesting that I plan on integrating when I get the chance as well. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 8:47:34 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns1.hexanet.fr (ns1.hexanet.fr [194.98.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 93CE037B424 for ; Fri, 18 May 2001 08:47:30 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from proton.hexanet.fr (proton.hexanet.fr [194.98.140.18]) by ns1.hexanet.fr (8.9.3/8.9.3) with ESMTP id RAA77373 for ; Fri, 18 May 2001 17:47:29 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.11.2/8.11.2) with SMTP id f4IFlTG02393 for ; Fri, 18 May 2001 17:47:29 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Fri, 18 May 2001 17:47:29 +0200 From: Christophe Prévotaux To: mobile@freebsd.org Subject: Gateway SOLO 2150 Message-Id: <20010518174729.05e2b0b5.c.prevotaux@hexanet.fr> X-Mailer: Sylpheed version 0.4.66 (GTK+ 1.2.7; i386--freebsd4.2) Organization: HEXANET Sarl Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi I own a Gateway SOLO 2150 + Integrated Ethernet (for which I do not know the chipset used ( if someone else knows please tell me ) I also have a Lucent Orinoco (ex Wavelan)PCMCIA Gold Card ( 802.11b Wireless adapter) and a DLINK DFE-660 PCMCIA (Cardbus) Ethernet card Since I have had this laptop none of these cards have ever worked under FreeBSD I am now using FreeBSD 4.3 RELEASE When inserting either DF660 or Orinoco Gold PCMCIAs FreeBSD just instantly freezes I have been using these cards on this same laptop using NetBSD 1.5 and up and all the cards are fully fonctionnal under this OS. I have been wondering why I can't use FreeBSD with the same hardware setup Does anyone has a solution to these problems under FreeBSD ? I also noticed something which I think is more related to X when configuring X under this NetBSD or FreeBSD I can't get X to display properly , the screen is all garbaged (buttons are split in 3 parts and obviously screen sync is wrong ) However under Linux (Debian) everything works fine I anyone needs more informations or wants to have run some tests or collect whatever information I can supply about my hardware + my FreeBSD setup , I'll gladly comply to any such requests. -- =================================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 BP415 Fax: +33 (0)3 26 79 30 06 51689 Reims Cedex 2 FRANCE =================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 8:55:37 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from salt.cips.nokia.com (Salt.network-alchemy.com [209.249.246.85]) by hub.freebsd.org (Postfix) with ESMTP id 983F637B422 for ; Fri, 18 May 2001 08:55:34 -0700 (PDT) (envelope-from key@cips.nokia.COM) Received: from salt.cips.nokia.com (localhost.cips.nokia.com [127.0.0.1]) by salt.cips.nokia.com (8.11.3/8.11.1) with ESMTP id f4IFsvr66905; Fri, 18 May 2001 08:54:57 -0700 (PDT) (envelope-from key@salt.cips.nokia.com) Message-Id: <200105181554.f4IFsvr66905@salt.cips.nokia.com> To: Christophe Pr votaux Cc: mobile@FreeBSD.ORG From: Ken Key Subject: Re: Gateway SOLO 2150 In-reply-to: Your message of Fri, 18 May 2001 17:47:29 +0200. <20010518174729.05e2b0b5.c.prevotaux@hexanet.fr> Date: Fri, 18 May 2001 08:54:57 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On a Gateway 5300 running v4.2, I had to change the pccard_mem value from DEFAULT to 0xD400 to keep it from freezing when I inserted a PCCARD. Might be the same issue on your 2150. In your /etc/rc.conf, add: pccard_mem=0xD400 and restart pccardd (or just reboot). Hope this helps, Ken Key > Hi > > I own a Gateway SOLO 2150 + Integrated Ethernet > (for which I do not know the chipset used ( if someone else knows > please tell me ) > > I also have a Lucent Orinoco (ex Wavelan)PCMCIA Gold Card ( 802.11b Wireless adapter) > and a DLINK DFE-660 PCMCIA (Cardbus) Ethernet card > > Since I have had this laptop none of these cards have ever worked under FreeBSD > I am now using FreeBSD 4.3 RELEASE > > When inserting either DF660 or Orinoco Gold PCMCIAs FreeBSD just instantly freezes > > I have been using these cards on this same laptop using NetBSD 1.5 and up > and all the cards are fully fonctionnal under this OS. > > I have been wondering why I can't use FreeBSD with the same hardware setup > > Does anyone has a solution to these problems under FreeBSD ? > > I also noticed something which I think is more related to X > when configuring X under this NetBSD or FreeBSD I can't get X > to display properly , the screen is all garbaged (buttons are > split in 3 parts and obviously screen sync is wrong ) > > However under Linux (Debian) everything works fine > > I anyone needs more informations or wants to have run some > tests or collect whatever information I can supply about my > hardware + my FreeBSD setup , I'll gladly comply to any such > requests. > > > > > -- > =================================================================== > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 > 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 > BP415 Fax: +33 (0)3 26 79 30 06 > 51689 Reims Cedex 2 > FRANCE > =================================================================== > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Ken Key (key@cips.nokia.com, key@Network-Alchemy.com) Nokia, Clustered IP Solutions, Santa Cruz, CA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 9: 3:32 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns1.hexanet.fr (ns1.hexanet.fr [194.98.140.1]) by hub.freebsd.org (Postfix) with ESMTP id A6AC237B443 for ; Fri, 18 May 2001 09:03:21 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from proton.hexanet.fr (proton.hexanet.fr [194.98.140.18]) by ns1.hexanet.fr (8.9.3/8.9.3) with ESMTP id SAA77782 for ; Fri, 18 May 2001 18:03:21 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.11.2/8.11.2) with SMTP id f4IG3KG02488 for ; Fri, 18 May 2001 18:03:21 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Fri, 18 May 2001 18:03:20 +0200 From: Christophe Prévotaux To: mobile@freebsd.org Subject: Solo 2150 and built in ethernet Message-Id: <20010518180320.56fa36d4.c.prevotaux@hexanet.fr> X-Mailer: Sylpheed version 0.4.66 (GTK+ 1.2.7; i386--freebsd4.2) Organization: HEXANET Sarl Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi As I wrote previously I own a Gateway Solo 2150 with built in ethernet port 10/100 I believe this is an Mini PCI 3COM 3C556 card I was wondering if Mini PCI and by extension my ethernet card was supported under FreeBSD or not ? I know it is supported under Linux as I have found : http://mobilix.org/minipci_linux.html -- =================================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 BP415 Fax: +33 (0)3 26 79 30 06 51689 Reims Cedex 2 FRANCE =================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 9: 7:35 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from ns1.hexanet.fr (ns1.hexanet.fr [194.98.140.1]) by hub.freebsd.org (Postfix) with ESMTP id 0AACA37B422 for ; Fri, 18 May 2001 09:07:31 -0700 (PDT) (envelope-from c.prevotaux@hexanet.fr) Received: from proton.hexanet.fr (proton.hexanet.fr [194.98.140.18]) by ns1.hexanet.fr (8.9.3/8.9.3) with ESMTP id SAA77916; Fri, 18 May 2001 18:07:30 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Received: from hexanet.fr (localhost [127.0.0.1]) by proton.hexanet.fr (8.11.2/8.11.2) with SMTP id f4IG7UG02517; Fri, 18 May 2001 18:07:30 +0200 (CEST) (envelope-from c.prevotaux@hexanet.fr) Date: Fri, 18 May 2001 18:07:30 +0200 From: Christophe Prévotaux To: Ken Key Cc: mobile@FreeBSD.ORG Subject: Re: Gateway SOLO 2150 Message-Id: <20010518180730.7cc0d177.c.prevotaux@hexanet.fr> In-Reply-To: <200105181554.f4IFsvr66905@salt.cips.nokia.com> References: <20010518174729.05e2b0b5.c.prevotaux@hexanet.fr> <200105181554.f4IFsvr66905@salt.cips.nokia.com> X-Mailer: Sylpheed version 0.4.66 (GTK+ 1.2.7; i386--freebsd4.2) Organization: HEXANET Sarl Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org It does not work it still freezes :( On Fri, 18 May 2001 08:54:57 -0700 Ken Key wrote: > On a Gateway 5300 running v4.2, I had to change the pccard_mem value > from DEFAULT to 0xD400 to keep it from freezing when I inserted a PCCARD. > Might be the same issue on your 2150. > > In your /etc/rc.conf, add: > > pccard_mem=0xD400 > > and restart pccardd (or just reboot). > > > Hi > > > > I own a Gateway SOLO 2150 + Integrated Ethernet > > (for which I do not know the chipset used ( if someone else knows > > please tell me ) > > > > I also have a Lucent Orinoco (ex Wavelan)PCMCIA Gold Card ( 802.11b Wireless adapter) > > and a DLINK DFE-660 PCMCIA (Cardbus) Ethernet card > > > > Since I have had this laptop none of these cards have ever worked under FreeBSD > > I am now using FreeBSD 4.3 RELEASE > > > > When inserting either DF660 or Orinoco Gold PCMCIAs FreeBSD just instantly freezes > > > > I have been using these cards on this same laptop using NetBSD 1.5 and up > > and all the cards are fully fonctionnal under this OS. > > > > I have been wondering why I can't use FreeBSD with the same hardware setup > > > > Does anyone has a solution to these problems under FreeBSD ? > > > > I also noticed something which I think is more related to X > > when configuring X under this NetBSD or FreeBSD I can't get X > > to display properly , the screen is all garbaged (buttons are > > split in 3 parts and obviously screen sync is wrong ) > > > > However under Linux (Debian) everything works fine > > > > I anyone needs more informations or wants to have run some > > tests or collect whatever information I can supply about my > > hardware + my FreeBSD setup , I'll gladly comply to any such > > requests. -- =================================================================== Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 BP415 Fax: +33 (0)3 26 79 30 06 51689 Reims Cedex 2 FRANCE =================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 9: 9:38 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from salt.cips.nokia.com (Salt.network-alchemy.com [209.249.246.85]) by hub.freebsd.org (Postfix) with ESMTP id 2952F37B43C for ; Fri, 18 May 2001 09:09:36 -0700 (PDT) (envelope-from key@cips.nokia.COM) Received: from salt.cips.nokia.com (localhost.cips.nokia.com [127.0.0.1]) by salt.cips.nokia.com (8.11.3/8.11.1) with ESMTP id f4IG93r67017; Fri, 18 May 2001 09:09:03 -0700 (PDT) (envelope-from key@salt.cips.nokia.com) Message-Id: <200105181609.f4IG93r67017@salt.cips.nokia.com> To: Christophe Pr votaux Cc: mobile@FreeBSD.ORG From: Ken Key Subject: Re: Solo 2150 and built in ethernet In-reply-to: Your message of Fri, 18 May 2001 18:03:20 +0200. <20010518180320.56fa36d4.c.prevotaux@hexanet.fr> Date: Fri, 18 May 2001 09:09:03 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org My IBM T21 has the 3Com 3C556B Mini-PCI. It works great under FreeBSD v4.3. It's device "xl0". Dunno if there is a difference between your 3C566 and my 3C566B. Regards, Ken Key > Hi > > As I wrote previously I own a Gateway Solo 2150 with > built in ethernet port 10/100 > > I believe this is an Mini PCI 3COM 3C556 card > > I was wondering if Mini PCI and by extension my ethernet > card was supported under FreeBSD or not ? > > I know it is supported under Linux as I have found : > > http://mobilix.org/minipci_linux.html > > -- > =================================================================== > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 > 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 > BP415 Fax: +33 (0)3 26 79 30 06 > 51689 Reims Cedex 2 > FRANCE > =================================================================== > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Ken Key (key@cips.nokia.com, key@Network-Alchemy.com) Nokia, Clustered IP Solutions, Santa Cruz, CA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 9:18: 2 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from salt.cips.nokia.com (Salt.network-alchemy.com [209.249.246.85]) by hub.freebsd.org (Postfix) with ESMTP id 71C5337B42C for ; Fri, 18 May 2001 09:17:54 -0700 (PDT) (envelope-from key@cips.nokia.COM) Received: from salt.cips.nokia.com (localhost.cips.nokia.com [127.0.0.1]) by salt.cips.nokia.com (8.11.3/8.11.1) with ESMTP id f4IGHMr67073; Fri, 18 May 2001 09:17:22 -0700 (PDT) (envelope-from key@salt.cips.nokia.com) Message-Id: <200105181617.f4IGHMr67073@salt.cips.nokia.com> To: Christophe Pr votaux Cc: Ken Key , mobile@FreeBSD.ORG From: Ken Key Subject: Re: Gateway SOLO 2150 In-reply-to: Your message of Fri, 18 May 2001 18:07:30 +0200. <20010518180730.7cc0d177.c.prevotaux@hexanet.fr> Date: Fri, 18 May 2001 09:17:22 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Bummer. Well, also had a freezing problem on an IBM X20 laptop. For that, I had to change the irq used by the pcic0 device from irq 0 (polling mode) to irq 10. This can be done by booting the kernel -c and editing it in the visual mode or by just reconfiguring and recompiling the kernel (I did the latter). There's probably a particular line that the editing method puts in boot.config, but I'm not up on that. It seems I saw this a few months ago on the list. You might want to also try searching the archives at: http://www.freebsd.org/search/search.html#mailinglists Don't forget to remove the pccard_mem line when you try that. By the way, the X20 was also v4.2, so I don't know if this is still an issue for v4.3. (I installed FreeBSD on several different models last december when we went through the IBM BIOS debacle, trying to find replacements for my development team). Good luck, Ken Key > It does not work it still freezes :( > > On Fri, 18 May 2001 08:54:57 -0700 > Ken Key wrote: > > > On a Gateway 5300 running v4.2, I had to change the pccard_mem value > > from DEFAULT to 0xD400 to keep it from freezing when I inserted a PCCARD. > > Might be the same issue on your 2150. > > > > In your /etc/rc.conf, add: > > > > pccard_mem=0xD400 > > > > and restart pccardd (or just reboot). > > > > > > Hi > > > > > > I own a Gateway SOLO 2150 + Integrated Ethernet > > > (for which I do not know the chipset used ( if someone else knows > > > please tell me ) > > > > > > I also have a Lucent Orinoco (ex Wavelan)PCMCIA Gold Card ( 802.11b Wireless adapter) > > > and a DLINK DFE-660 PCMCIA (Cardbus) Ethernet card > > > > > > Since I have had this laptop none of these cards have ever worked under FreeBSD > > > I am now using FreeBSD 4.3 RELEASE > > > > > > When inserting either DF660 or Orinoco Gold PCMCIAs FreeBSD just instantly freezes > > > > > > I have been using these cards on this same laptop using NetBSD 1.5 and up > > > and all the cards are fully fonctionnal under this OS. > > > > > > I have been wondering why I can't use FreeBSD with the same hardware setup > > > > > > Does anyone has a solution to these problems under FreeBSD ? > > > > > > I also noticed something which I think is more related to X > > > when configuring X under this NetBSD or FreeBSD I can't get X > > > to display properly , the screen is all garbaged (buttons are > > > split in 3 parts and obviously screen sync is wrong ) > > > > > > However under Linux (Debian) everything works fine > > > > > > I anyone needs more informations or wants to have run some > > > tests or collect whatever information I can supply about my > > > hardware + my FreeBSD setup , I'll gladly comply to any such > > > requests. > > > -- > =================================================================== > Christophe Prevotaux Email: c.prevotaux@hexanet.fr > HEXANET SARL URL: http://www.hexanet.fr/ > Z.A Farman Sud Tel: +33 (0)3 26 79 30 05 > 9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02 > BP415 Fax: +33 (0)3 26 79 30 06 > 51689 Reims Cedex 2 > FRANCE > =================================================================== > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message -- Ken Key (key@cips.nokia.com, key@Network-Alchemy.com) Nokia, Clustered IP Solutions, Santa Cruz, CA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 9:18:12 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from dc01m01.norada.com (h-209-91-109-214.gen.cadvision.com [209.91.109.214]) by hub.freebsd.org (Postfix) with ESMTP id 17D5A37B422 for ; Fri, 18 May 2001 09:18:10 -0700 (PDT) (envelope-from vriabov@webaddressbook.com) Received: from dmz98 (dmz98.dmz.webab.com [172.23.100.14]) by dc01m01.norada.com (Postfix) with SMTP id EAE22123BA for ; Fri, 18 May 2001 16:14:01 +0000 (UTC) X-Priority: 3 X-MSMail-Priority: Medium From: "Viatcheslav Riabov" To: Date: Fri, 18 May 2001 16:16:55 -0000 Message-ID: <193701c0dfb5$f4ad0bf0$0e6417ac@norada.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft CDO for Windows 2000 Thread-Index: AcDftfSldvXClqBBSbiMtGxC/C+4Iw== Content-Class: urn:content-classes:message X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hello: Yesterday I managed to install FreeBSD 3.2-RELEASE on my ThinkPad 755Cs and, of course, keyboard didn't work after installation. The installation itself went through OK, because I set flags sc0 to 0x10 and atkbd0 to 0x4. I expected these setting to continue to work with the system, but they didn't. I looked through all archives, read all theory about recompiling kernel with ThinkPad support, but I simply can not log in! I still have a feeling that there is something wrong with flags. Could anybody help? I've been through a lot of troubles installing it and I really don't want to give up when I am so close to end. Also, my ThinkPad is not networked and I was using PAO 3.5-RELEASE floppies during installation. Thank you. Slava << Powered by http://www.norada.com >> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Fri May 18 22:52:28 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from midget.dons.net.au (daniel.lnk.telstra.net [139.130.137.70]) by hub.freebsd.org (Postfix) with ESMTP id E123437B422 for ; Fri, 18 May 2001 22:50:30 -0700 (PDT) (envelope-from doconnor@gsoft.com.au) Received: from cain.gsoft.com.au (root@localhost [127.0.0.1]) by midget.dons.net.au (8.11.3/8.9.3) with ESMTP id f4J5ni812959; Sat, 19 May 2001 15:19:44 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Message-ID: X-Mailer: XFMail 1.4.7 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <12384.990098263@critter> Date: Sat, 19 May 2001 00:49:43 -0300 (ART) From: "Daniel O'Connor" To: Poul-Henning Kamp Subject: Re: Modem on laptop... Cc: freebsd-mobile@FreeBSD.ORG, "Richard C." , Kevin Oberman , WATANABE Kiyoshi , Dinesh Nair Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On 17-May-2001 Poul-Henning Kamp wrote: > Question: What is the copyright on the binary object file from > the Linux version ? > > Would it be allowed to include it like the other binary drivers > in src/sys/contrib/dev/* as a uuencode file ? yum ;) > If so we should commit this driver to the tree... That would be nice, but it is pretty substantial (400kb). I can't see a copyright for the binary in the distribution (there is v 5.95 now.. needs a bit of work I think though). I can't see a copyright notice in the binary either :-/ --- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat May 19 0:52:21 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from baboon.aciri.org (adsl-64-166-241-35.dsl.snfc21.pacbell.net [64.166.241.35]) by hub.freebsd.org (Postfix) with ESMTP id 0FA7037B422 for ; Sat, 19 May 2001 00:52:18 -0700 (PDT) (envelope-from bkarp@baboon.aciri.org) Received: from baboon.aciri.org (localhost [127.0.0.1]) by baboon.aciri.org (8.11.3/8.11.1) with ESMTP id f4J7qUL56702; Sat, 19 May 2001 00:52:30 -0700 (PDT) (envelope-from bkarp@baboon.aciri.org) Message-Id: <200105190752.f4J7qUL56702@baboon.aciri.org> From: Brad Karp To: freebsd-mobile@freebsd.org Cc: rooneg@electricjellyfish.net Subject: fix for Linksys access point Date: Sat, 19 May 2001 00:52:29 -0700 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org I just spent an hour with a friend who'd bought a Linksys 802.11 access point, who also found that he couldn't talk to or through the access point successfully under FreeBSD, or Linux either, for that matter. We found the problem, and a less-than-perfect workaround. There are two framing standards used for packets in 802.11: RFC 1042 / 802.11 encoding (with SNAP header), and 802.3 encoding. Lucent WaveLAN base stations send their IP and ARP packets as RFC 1042 / 802.11 frames, as do the FreeBSD, Linux, and Windows drivers. The host 802.11 interface (Hermes) hardware returns a status code with every received packet (rx_frame.wi_status) to indicate which type of packet the buffer holds. The wi driver uses this field to determine whether to process an incoming packet with RFC 1042 decapsulation, or as an 802.3 frame. Something (I'm not quite sure what) about the frames sent by the Linksys base station causes the Hermes to return a *zero* status code upon receiving them, rather than 0x2000, which indicates an RFC1042 packet. The way the wi driver is written, this causes the incoming packet to fall through to the 802.3 case. Zero doesn't seem to be a defined status code, in either the FreeBSD or Linux drivers. But the Linksys base station's packet *is* in RFC1042 format. So the decapsulation isn't performed on the inbound packet, and garbage (including the MAC addresses of the inbound packet) winds up being passed up to ether_input (which in turn drops the packet when it sees the dst address doesn't match that of the interface). My guess is that the Windows driver blindly performs RFC1042 decapsulation on every packet it receives, and thus receives the Linksys base station's questionable packets without difficulty. A quick fix if you're stuck with one of these base stations is to hack /sys/i386/isa/if_wi.c:wi_rxeof() so that frames *not only* with wi_status of WI_STAT_1042, WI_STAT_TUNNEL, or WI_STAT_WMP_MSG, *but also* with wi_status 0, are RFC1042 decapsulated. The equivalent hack to the Linux driver made the Linux WaveLAN driver receive packets from the Linksys base station just fine! The proper fix, though, is for Linksys to fix their firmware so that their base station generates packets that a WaveLAN card can properly identify as RFC1042-encapsulated. -Brad, bkarp@icsi.berkeley.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat May 19 3:21:44 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mta03-svc.ntlworld.com (mta03-svc.ntlworld.com [62.253.162.43]) by hub.freebsd.org (Postfix) with ESMTP id 42D2137B424 for ; Sat, 19 May 2001 03:21:41 -0700 (PDT) (envelope-from scott.mitchell@mail.com) Received: from lungfish.ntlworld.com ([62.253.151.54]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20010519102140.QSRH283.mta03-svc.ntlworld.com@lungfish.ntlworld.com>; Sat, 19 May 2001 11:21:40 +0100 Received: (from scott@localhost) by lungfish.ntlworld.com (8.8.8/8.8.8) id LAA05476; Sat, 19 May 2001 11:22:50 +0100 (BST) (envelope-from scott) Message-ID: <20010519112250.23459@localhost> Date: Sat, 19 May 2001 11:22:50 +0100 From: Scott Mitchell To: randal@mailrelay.hits.net, mobile@FreeBSD.ORG Subject: Re: Xircom Watchdog Time-out Bug References: <3AFD13D0.15883.1D4F00@localhost>; <20010516222722.38753@localhost> <3B0324ED.28683.358E3A@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.89i In-Reply-To: <3B0324ED.28683.358E3A@localhost>; from Randal Masutani on Thu, May 17, 2001 at 01:10:05AM -1000 X-Operating-System: FreeBSD 2.2.6-RELEASE i386 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Thu, May 17, 2001 at 01:10:05AM -1000, Randal Masutani wrote: > Yes, I have tried different hub/switches. I always get a time-out but > sometimes only one and at other times many. Yes, I eventually get it to > work most times after removing and reinserting the card. Forcing it to a > particular type didn't seem to work to well. > > >From what I gather from the debug statements it appears that it is not > reading the PHY status (BMSR register) properly, since it is getting back > a 0 (null) result. Maybe there is not enough delay or wait states > between reading or writing to the PHY registers? Maybe, although I think the delays are already longer than they need to be. Just watch how long it takes to grind through the autonegotiation process :-( > I have looked at the source code and also source from the Linux driver > and the sdk kit from Xircom, they all are a little different in the > procedure on how to read and write data to the MII registers. True enough... I lifted the MII code from one of the other drivers in the 3.1R (?) tree and it hasn't been updated since then. I will follow up on Mike Smith's suggestion and look at the more recent miibus code. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat May 19 18:44:36 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from mighty.grot.org (mighty.grot.org [216.15.97.5]) by hub.freebsd.org (Postfix) with ESMTP id 2FC3037B422 for ; Sat, 19 May 2001 18:44:32 -0700 (PDT) (envelope-from aditya@grot.org) Received: by mighty.grot.org (Postfix, from userid 515) id 133235D0F; Sat, 19 May 2001 18:44:32 -0700 (PDT) Date: Sat, 19 May 2001 18:44:32 -0700 From: "R.P. Aditya" To: freebsd-mobile@freebsd.org Subject: APM under 4.3 wakeup freezing NEC Versa 5060X Message-ID: <20010519184431.A12581@mighty.grot.org> Reply-To: "R.P. Aditya" Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-PGP-Key: http://www.grot.org/pubkey.asc X-PGP-Key-ID: 0x6405D8D5 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org My NEC Versa 5060X running 4.3-RELEASE goes to sleep succesfully when I issue a "zzz" or "apm -z", however I can't wake it up by pressing any of the keys on the keyboard. I have to hit the power button to wake it up, at which point it brings up the screen, but it is frozen (doesn't take any keyboard input or ctrl-alt-delete). I've tried removing all pccards, and killing all but the minimum of processes to no avail. I have the following in my kernel: device apm0 at nexus? flags 0x20 and it looks good on bootup: apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 and when I run apm, I get: > apm APM version: 1.2 APM Managment: Enabled AC Line status: on-line Battery status: high Remaining battery life: 100% Remaining battery time: unknown Number of batteries: 1 Battery 0: Battery status: high Remaining battery life: 100% Remaining battery time: unknown APM Capacities: global standby state global suspend state resume timer from suspend Any hints? I've made the BIOS settings for APM management as vanilla as possible... Thanks, Adi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat May 19 20: 2:34 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from borg-cube.com (226-193.adsl2.netlojix.net [207.71.226.193]) by hub.freebsd.org (Postfix) with ESMTP id 545AC37B42C; Sat, 19 May 2001 20:02:22 -0700 (PDT) (envelope-from dburr@borg-cube.com) Received: from borg-cube.com (dburr@borg-cube.com [207.71.226.193] (may be forged)) by borg-cube.com (8.11.3/8.11.3) with ESMTP id f4K32GR44680; Sat, 19 May 2001 20:02:16 -0700 (PDT) (envelope-from dburr@borg-cube.com) Date: Sat, 19 May 2001 20:02:16 -0700 (PDT) From: Donald Burr of Borg To: FreeBSD Questions Cc: FreeBSD Mobile Subject: Does FreeBSD WaveLAN driver support IBSS (orinoco Peer-to-Peer)? Message-ID: <20010519194104.D44199-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org [ followups to freebsd-questions, please ] I noticed, when upgrading my Windows machine to the latest Orinoco (aka WaveLAN) drivers, that support for Ad-Hoc Demo Mode has been dropped. Hence, my nice little WaveLAN network has ceased operation. :( Instead they have created a new IBSS "Peer to Peer" mode, which supposedly does NOT require the presence of an Access Point, just like Ad-Hoc. However, from what I understand, peer-to-peer mode isn't supported by all the drivers out there; for example, the Linux driver, from what I understand, does not support it. My question is: is this mode of operation (Peer to peer/IBSS) supported by the FreeBSD wi driver in 4.3-STABLE? I browsed around the man pages and found this in the man page for wicontrol(8): -i iface -c 0|1 Allow the station to create a service set (IBSS). Permitted values are 0 (don't create IBSS) and 1 (enable creation of IBSS). The default is 0. Note: this option is provided for experimental purposes only: enabling the creation of an IBSS on a host system doesn't ap- pear to actually work. So it would seem that IBSS mode is *not* supported by the wi driver... but I thought I had better check, just in case this information is inaccurate or otherwise out of date. Any ideas as to how I can get my WaveLAN setup working again? Thanks, Donald -- Donald Burr of Borg | FreeBSD: The Power to Serve! WWW: http://www.borg-cube.com/ ICQ #16997506 | http://www.freebsd.org/ P.O. Box 91212, Santa Barbara, CA 93190-1212 \----------------------------- Phone: (805)957-9666 Present Day... Present Time! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message From owner-freebsd-mobile Sat May 19 22:46: 1 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from hawk.mail.pas.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 25CA037B422; Sat, 19 May 2001 22:45:58 -0700 (PDT) (envelope-from finlayson@live.com) Received: from rsf-laptop.live.com (pool0053.cvx19-bradley.dialup.earthlink.net [209.179.244.53]) by hawk.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id WAA11088; Sat, 19 May 2001 22:45:58 -0700 (PDT) Message-Id: <4.3.1.1.20010519224116.00b80f00@localhost> X-Sender: rossfinlayson@localhost X-Mailer: QUALCOMM Windows Eudora Version 4.3.1 Date: Sat, 19 May 2001 22:44:39 -0700 To: Donald Burr of Borg From: Ross Finlayson Subject: Re: Does FreeBSD WaveLAN driver support IBSS (orinoco Peer-to-Peer)? Cc: FreeBSD Questions , FreeBSD Mobile In-Reply-To: <20010519194104.D44199-100000@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org At 08:02 PM 5/19/01, Donald Burr of Borg wrote: >My question is: is this mode of operation (Peer to peer/IBSS) supported by >the FreeBSD wi driver in 4.3-STABLE? Yes, it works fine. See for a description of how I got IBSS mode to work under FreeBSD. BTW, IBSS mode is actually the standard peer-to-peer mode for 802.11. "Ad hoc demo" mode was just a Lucent-specific hack, and is (as you noted) no longer supported by the newest versions of Lucent firmware. Ross. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message