From owner-freebsd-questions Sun Jun 17 0:21:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from white.dogwood.com (white.dogwood.com [63.96.228.130]) by hub.freebsd.org (Postfix) with ESMTP id 26D6B37B403 for ; Sun, 17 Jun 2001 00:20:51 -0700 (PDT) (envelope-from dave@dogwood.com) Received: (from dave@localhost) by white.dogwood.com (8.11.3/8.11.3) id f5H7KlM90295; Sun, 17 Jun 2001 00:20:47 -0700 (PDT) (envelope-from dave) From: Dave Cornejo Message-Id: <200106170720.f5H7KlM90295@white.dogwood.com> Subject: SuperMicro 6010H SCSI Problems To: freebsd-questions@freebsd.org Date: Sun, 17 Jun 2001 00:20:47 -0700 (PDT) X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I finally got a make release done (a heartfelt thanks to all the people I badgered to commit fixes for that!) and installed it. I'm having a problem with a SuperMicro 6010H server (uses a 370DER+ motherboard), dual 1GHz PIII, 1GB RAM, 2 x Seagate ST318451LC drives (18GB 15K RPM Ultra160 SCSI). The SCSI chip is an Adaptec 7899. The software is several different kernels from today (June 16) cvsupped at various times. It seems to boot okay with a non-SMP kernel, but hangs with an SMP one. It seems to revolve around the SCSI stuff, I did a boot -v and tried to get into the debugger but it's hung hard. Oddly sometimes if you pound on the keyboard at the right point (noted in the edited output of dmesg below) it will continue on to boot, but you get tons of "Retrying commands" and "tagged openings now XXX" before things settle out and all seems to work okay after that. Another tidbit: swapped the drives and reinstalled and the command retries aren't happening (at least not as quickly or often), but the hang is still there. Any clues would be appreciated... dave c what I hope are the relevant bits of dmesg: ahc0: port 0xd000-0xd0ff mem 0xfeafc000-0xfeafcfff irq 5 at device 5.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 419 instructions downloaded aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 7 at device 5.1 on pci0 ahc1: Reading SEEPROM...done. ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 419 instructions downloaded aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs ... BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 ... Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (probe0:ahc0:0:0:0): Retrying Command (probe1:ahc0:0:1:0): Retrying Command (ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 0 using 16bit transfers ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f (ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 1 using 16bit transfers ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f >> usually hangs here, but sometimes if you pound on the keyboard at >> exactly the right moment, it will continue as in this case: pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 3CC00ESN00001048HMU7 pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number 3CC00DZC000010460HC7 pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled Creating DISK da0 Creating DISK da1 da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 3CC00ESN00001048HMU7 da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843671 512 byte sectors: 255H 63S/T 2231C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number 3CC00DZC000010460HC7 da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 17501MB (35843671 512 byte sectors: 255H 63S/T 2231C) Mounting root from ufs:/dev/da0s1a da0s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff start_init: trying /sbin/init da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK da1s1: type 0xa5, start 63, end = 35841014, size 35840952 : OK (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 64 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 56 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 55 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 53 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 51 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 49 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 47 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 45 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 43 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 42 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 41 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 39 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 37 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 35 (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): Retrying Command (da0:ahc0:0:0:0): tagged openings now 33 (da0:ahc0:0:0:0): Retrying Command -- Dave Cornejo @ Dogwood Media, Fremont, California (also dcornejo@ieee.org) "There aren't any monkeys chasing us..." - Xochi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 0:39:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from host.job-rex.com (host.job-rex.com [211.10.0.113]) by hub.freebsd.org (Postfix) with ESMTP id D8FA037B407 for ; Sun, 17 Jun 2001 00:39:21 -0700 (PDT) (envelope-from info@job-rex.com) Received: from info (240.pool8.dsltokyo.att.ne.jp [165.76.190.240]) by host.job-rex.com (8.11.4/8.11.4) with SMTP id f5H7dcJ32595 for ; Sun, 17 Jun 2001 16:39:39 +0900 Date: Sun, 17 Jun 2001 16:39:39 +0900 Message-Id: <200106170739.f5H7dcJ32595@host.job-rex.com> From: "job-rex.com" To: freebsd-questions@FreeBSD.ORG Subject: =?ISO-2022-JP?B?gXmTXZBFjniJh4NUg0ODZ4F6g1eDh4N1g4yDYoNOg1g=?= X-Mailer: MultiSneder1.2 Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-2022-JP Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 【転職支援サイト】ジョブレックス http://www.job-rex.com/ はじめまして、ジョブレックスです。 突然ですが 今働いている会社の評価に満足していますか？ ジョブレックスは現在キャリアアップ活動中の人、 不満はあるけど‥‥‥、という人の活動を支援する キャリアアップ支援サイトです。 今まで転職活動で成果を上げる事が出来なかった方も、 ジョブレックスで転職のキャリアアップ！ 求人企業や募集職種についての詳細はＨＰでご覧になれますが、 不明な点があれば直接、電話やメールで簡単に問い合わせする事もできます。 詳しくはこちら↓ http://www.job-rex.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 1:25:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 5AC6B37B403 for ; Sun, 17 Jun 2001 01:25:23 -0700 (PDT) (envelope-from nick@rogness.net) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id f5H9keB83943; Sun, 17 Jun 2001 04:46:41 -0500 (CDT) (envelope-from nick@rogness.net) Date: Sun, 17 Jun 2001 04:46:40 -0500 (CDT) From: Nick Rogness X-Sender: nick@cody.jharris.com To: LeRoy Cc: questions@FreeBSD.ORG Subject: Re: Natd Firewall port forwarding Router In-Reply-To: <000001c0f6d5$f9ff50e0$0264a8c0@coolness> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 16 Jun 2001, LeRoy wrote: > I would like to know is there any tutorials out there that have all > three in one tutorial that will help me port forward, run natd and the > firewall all on the same computer. Maybe this might help you: http://freebsd.rogness.net/basic/nat.html Nick Rogness - Keep on Routing in a Free World... "FreeBSD: The Power to Serve!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 2:23: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 6A65537B401 for ; Sun, 17 Jun 2001 02:22:57 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5H9Mil61705; Sun, 17 Jun 2001 02:22:45 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "_kr" , Subject: RE: lpd stay dead on disk I/O Date: Sun, 17 Jun 2001 02:22:44 -0700 Message-ID: <001a01c0f70f$110e64e0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <3B2B584D.5060409@inwind.it> X-MIMEOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If the printers are plugged into the parallel port on the FreeBSD system, you may be better off getting hardware print servers for them and plugging them into an Ethernet cable that the server is on. You still get the benefits of the queue management on the BSD server without the hassle of crap parallel port glitches. See the following for a discussion of this: http://www.freebsd.org/doc/en_US.ISO8859-1/books/corp-net-guide/index.html Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of _kr >Sent: Saturday, June 16, 2001 6:00 AM >To: freebsd-questions@FreeBSD.ORG >Subject: lpd stay dead on disk I/O > > >Hello, > >I got a serious problem with lpd on my print-server running FreeBSD >4.1.1-RELEASE; "sometimes" (I think it happens when very large files are >printed or when printer has troubles with memory) printers hang (usually >around 95% of job) and lpd falls dead, this is what it looks like with ps: > >34131 ?? D 10:01.48 /usr/sbin/lpd > >the process becomes unkillable (even turning into single user mode) and >also removing the lock file and restarting lpd helps since new process >cannot recognize printers (messages like "printer offline" "printing >disable"...); the only way to return to a proper status I found until >now was rebooting but I don't like rebooting... :) so does anyone have a >clue about that? > >ps: printers are: > >- HP laserjet 1100 >- Epson Stylus Photo 870 > >they get jobs from machines running windows 98 (on samba) and linux >(slackware 2.4.5 kernel) > > >-- >Lorenzo Scano > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 2:27:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id CCBF737B403 for ; Sun, 17 Jun 2001 02:27:36 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5H9RKl61722; Sun, 17 Jun 2001 02:27:21 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Dave Atkins" , Subject: RE: VPN Howto and software? Date: Sun, 17 Jun 2001 02:27:20 -0700 Message-ID: <001c01c0f70f$b5783ce0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <000601c0f68a$c516a810$0300a8c0@dave> X-MIMEOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You also have the option of terminating the PPTP connection right on the FreeeBSD firewall itself using PoPToP should you want to do that. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Dave Atkins >Sent: Saturday, June 16, 2001 10:36 AM >To: freebsd-questions@FreeBSD.ORG >Subject: VPN Howto and software? > > >Is there an up-to-date online resource showing what software is needed and >how to configure a VPN through a FreeBSD 4.3 firewall? > >1) I am looking for a free solution - I have no money to spend on this >2) I need a solution that will work primarily between Windows NT, 2000, and >98 machines. > >Basically, instead of punching a bunch of holes in my home >firewall, I would >rather set up a VPN, then use that to access my home network from work. >Terminal Services in Windows 2K works fine for my Win2K server and clients, >but I have an old NT box at home and I need to access it from >Win98 or other >NT machines at times. > >I have used products like AltaVista Tunnel and Infoexpress VTCP/SECURE in >the past, but they cost way more money than I want to spend for what is >basically a convenience item for me. > >Thanks >Dave Atkins > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 2:43: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 9E0CE37B405 for ; Sun, 17 Jun 2001 02:42:44 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5H9gfl61753; Sun, 17 Jun 2001 02:42:41 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "kjerste soderberg" , Cc: Subject: RE: aggregating bandwidth fr 3 incoming DSL lines Date: Sun, 17 Jun 2001 02:42:41 -0700 Message-ID: <001d01c0f711$da5b5fe0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <20010615212105.56683.qmail@web9708.mail.yahoo.com> X-MIMEOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In looking at this, the idea of the devices that Fat Pipe is selling is that you buy TWO devices, one for each "site" that you want to interconnect. Presumably you then have multiple DSL lines from different ISP's coming to each site. This is NOT a solution used with a single ISP to increase incoming Internet bandwidth from that ISP. In theory, it should be possible to duplicate this with ppp under FreeBSD, you create a config that runs multilink PPP over TCP. PPP-over-TCP is already supported in user-mode ppp as is multilink PPP. You may have to make some modifications to the ppp program itself, but most of the work has been done. My only caution though is that if one circuit path between each site has a tremendously higher amount of Round Trip Times on traffic between the sites, then your link is going to favor the circuit path with the hightest speed with most of the traffic, so you may not notice any speed increase. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of kjerste >soderberg >Sent: Friday, June 15, 2001 2:21 PM >To: questions@FreeBSD.ORG >Cc: suppt@ethone.com >Subject: aggregating bandwidth fr 3 incoming DSL lines > > >Hi all, > >Fat Pipe Networks has these expensive "black boxes" >that will accept the input of any 4-8 incoming >ethernet interfaces (say DSL lines, cable modems, T-1) >and then aggregate that bandwidth over all interfaces > >Great for load balancing, fail-over, large FTP >TRANSFERS ... > >DON'T KNOW HOW THEY DO IT, whether they NAT whatever >.. > >Anything I can use in FBSD 4.3 to mimic that type of >behavior .. say 3 ethernet NICs in 1 FBSD box that >accept these 3 incoming DSL-to-ethernet connections >and a 4th NIC tied to the LAN (w/ NATd running ..) ... >you get the idea .. > >?? >thanx > >__________________________________________________ >Do You Yahoo!? >Get personalized email addresses from Yahoo! Mail - only $35 >a year! http://personal.mail.yahoo.com/ > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 2:54:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heard.com.au (heard.com.au [203.53.37.162]) by hub.freebsd.org (Postfix) with SMTP id 90A9037B409 for ; Sun, 17 Jun 2001 02:54:42 -0700 (PDT) (envelope-from hmag@ozemail.com.au) Received: from [203.53.37.188] ([203.53.37.188] verified) by heard.com.au (Stalker SMTP Server 1.8b8) with ESMTP id S.0000018093 for ; Sun, 17 Jun 2001 19:54:40 +1000 X-Sender: hmag@pop.ozemail.com.au (Unverified) Message-Id: In-Reply-To: <3B2B4B99.88344B91@iowna.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@FreeBSD.ORG From: Terry Allen Subject: Re: BSD problem Date: Sun, 17 Jun 2001 19:54:40 +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >Terry Allen wrote: >> >> Hi there, >> I bought a copy of the FreeBSD 4.3 installation CD from >> www.everythinglinux.com.au last week & tried to install it this afternoon >> (I'm brand new to the world of installing UNIX, so please bear with me. >> I set the PC's BIOS to boot from the CD (which it did), went >> through the installation up until it asked me to choose a media to install >> from. >> The install from CD ROM option was outlined , so I hit enter, but >> the installer replied that the CD could not be found. I looked through the >> installation CD info files on my Mac, but couldn't find anything to help, >> so I wonder if anyone might be able to help out. >> The PC details are as follows >> >> Motherboard: Slot1 / Socket 370 M741LMRT (includes onboard 10/100 ethernet >> & V90 56K Modem) >> CPU: Intel Celeron 533 >> RAM: 128MB >> Hard drive: Seagate 20GB >> Monitor: LG Studioworks 55V 15" >> SCSI Card: Tekram DC-315/U PCI >> CD ROM: 44X speed > >You don't mention the make/model of mobo. Is the CD-ROM attached to the >SCSI bus or IDE? >The hardware may simply be not compatible with FreeBSD. This can be >confusing until you understand that the BIOS boots the system, but once >it's running it's FreeBSD that needs to access the CD-ROM. Two things >you can do: >1. Get the make/model of the CD-ROM & mobo and compare to the hardware >compat list @ www.freebsd.org >2. Watch the boot messages and see if your CD-ROM is detected. >If it's not detected, you may be out of luck until you replace some >hardware. If you have an IDE CD-ROM now, you may find better luck with a >SCSI CD-ROM. > >Good luck, >Bill > Hi again, Sorry for the confusion in my original post. The Motherboard is a PC100 make & the CD ROM is attached to the IDE bus & the make/model from the top of the drive is - Top-G / BCD E522A I'll pick up an IDE cable tomorrow & make it the master on the secondary bus. Bye for now, Terry Allen ___________________________________________________________________ hEARd Postal Address: hEARd c/o 128 The Entrance Rd The Entrance NSW 2261 Australia Internet - WWW: http://heard.com.au or http://www.ozemail.com.au/~hmag Interactive Message Board - http://heard.com.au/wwwboard/ EMAIL: (checked every Thursday & Sunday, sometimes more often) hmag@ozemail.com.au ---------------------------------- Non profit promotion for new music ---------------------------------- Also, check out the Educate site - http://www.educate.net.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 3: 3:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heard.com.au (heard.com.au [203.53.37.162]) by hub.freebsd.org (Postfix) with SMTP id B1D8437B40B for ; Sun, 17 Jun 2001 03:03:11 -0700 (PDT) (envelope-from hmag@ozemail.com.au) Received: from [203.53.37.188] ([203.53.37.188] verified) by heard.com.au (Stalker SMTP Server 1.8b8) with ESMTP id S.0000018095 for ; Sun, 17 Jun 2001 20:03:11 +1000 X-Sender: hmag@pop.ozemail.com.au (Unverified) Message-Id: In-Reply-To: <3B2B4B99.88344B91@iowna.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@FreeBSD.ORG From: Terry Allen Subject: Re: BSD problem (second half of post) Date: Sun, 17 Jun 2001 20:03:11 +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again, Following from my last post, the Top-G CD ROM is an Atapie IDE type drive. (Sorry for posting the first time directly to you Bill) Bye for now, Terry Allen ___________________________________________________________________ hEARd Postal Address: hEARd c/o 128 The Entrance Rd The Entrance NSW 2261 Australia Internet - WWW: http://heard.com.au or http://www.ozemail.com.au/~hmag Interactive Message Board - http://heard.com.au/wwwboard/ EMAIL: (checked every Thursday & Sunday, sometimes more often) hmag@ozemail.com.au ---------------------------------- Non profit promotion for new music ---------------------------------- Also, check out the Educate site - http://www.educate.net.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 3:17:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fepA.post.tele.dk (fepA.post.tele.dk [195.41.46.143]) by hub.freebsd.org (Postfix) with ESMTP id 8225737B403 for ; Sun, 17 Jun 2001 03:17:05 -0700 (PDT) (envelope-from mekanix@privat.dk) Received: from mekanix.my.domain ([62.243.18.252]) by fepA.post.tele.dk (InterMail vM.4.01.03.21 201-229-121-121-20010307) with SMTP id <20010617101651.TQPY4676.fepA.post.tele.dk@mekanix.my.domain>; Sun, 17 Jun 2001 12:16:51 +0200 Date: Sun, 17 Jun 2001 12:17:32 +0200 From: Bjarne Wichmann Petersen To: "Akinori MUSHA" Cc: questions@FreeBSD.org Subject: Re: make clean failure at japanese/ruby14-tcltklib Message-Id: <20010617121732.6aaf06b6.mekanix@privat.dk> In-Reply-To: <86ithwwr0l.wl@archon.local.idaemons.org> References: <20010616122558.084f95f1.mekanix@privat.dk> <86k82cwvmj.wl@archon.local.idaemons.org> <20010616140107.1fb365e3.mekanix@privat.dk> <86ithwwr0l.wl@archon.local.idaemons.org> X-Mailer: Sylpheed version 0.4.64 (GTK+ 1.2.10; i386--freebsd4.3) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 16 Jun 2001 21:25:30 +0900 "Akinori MUSHA" wrote: > Do you have an option "delete" in your supfile? If not, you have to > specify it to get obsoleted ports properly removed from your local > tree. I do, but I think I might know where the problem is. In my 'refuse'-file I've got ports/japanese and a lot of other countryspecific sub-trees I have no interest in. So, how do I remove these sub-trees entirely from my harddrive? Bjarne To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 4:31: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from what.ifelse.org (what.ifelse.org [208.171.40.202]) by hub.freebsd.org (Postfix) with ESMTP id 9BF3837B410 for ; Sun, 17 Jun 2001 04:30:48 -0700 (PDT) (envelope-from billt@ifelse.org) Received: from zaius (2416419hfc44.tampabay.rr.com [24.164.19.44]) by what.ifelse.org (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id GAA03445; Sun, 17 Jun 2001 06:29:16 -0500 X-Authentication-Warning: what.ifelse.org: Host 2416419hfc44.tampabay.rr.com [24.164.19.44] claimed to be zaius Date: Sun, 17 Jun 2001 07:30:50 -0400 (EDT) From: bill X-X-Sender: To: james grimsey Cc: Subject: Re: Ati video support In-Reply-To: <20010617064841.11534.qmail@web4805.mail.yahoo.com> Message-ID: <20010617064921.V7949-100000@zaius.poa> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 16 Jun 2001, james grimsey wrote: > Hi my name is james and i was wondering if the new > release > had support for an (ati all-in-wonder rage 128 pro > agp) video card in XF86 ok thanks Yep, 4.1.0 supports it in the 'ati' driver. If you want video, check out: http://www.linuxvideo.org/gatos/ Just don't make clean in your XFree86-4 port before you compile their ati.2 drivers. I have a AIW 128 pro AGP 32MB and the gatos project's ati.2 modules compiled and installed fine for me in FreeBSD 4.3-STABLE. Install the xawtv port to watch tv. If you get stuck, let me know... I still have the ati.2 tree compiled for 4.1.0 and could gzip it up for you. Good luck, Bill To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 4:43:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from Awfulhak.org (gw.Awfulhak.org [217.204.245.18]) by hub.freebsd.org (Postfix) with ESMTP id 634BB37B401 for ; Sun, 17 Jun 2001 04:42:58 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by Awfulhak.org (8.11.4/8.11.4) with ESMTP id f5HBguF06615; Sun, 17 Jun 2001 12:42:56 +0100 (BST) (envelope-from brian@lan.Awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost [127.0.0.1]) by hak.lan.Awfulhak.org (8.11.4/8.11.4) with ESMTP id f5HBgqo26693; Sun, 17 Jun 2001 12:42:52 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <200106171142.f5HBgqo26693@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: FreeBSD Cc: Brian Somers , freebsd-questions@FreeBSD.org, brian@Awfulhak.org Subject: Re: ppp dialup server In-Reply-To: Message from FreeBSD of "Sat, 16 Jun 2001 19:28:21 MDT." <20010616192612.T2135-100000@Amber.XtremeDev.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 17 Jun 2001 12:42:52 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I guess the best bet is to enable logging on the client side and see what it's seeing. > Hmm. I tried replacing the phone line, and dialed in from two other > machines, still no luck. I've had WindowsNT4 installed on this machine > previously and it acted as an RAS server using the internal courier modem. > I don't know what else to test/try to see where the error lies. > > On Thu, 14 Jun 2001, Brian Somers wrote: > > > It looks to me as if the windows box isn't seeing your negotiations. > > Perhaps you've got a faulty cable or a broken pin in one of your > > connectors ? > > > > > I seem to have the worst luck trying to setup a ppp dialup server. I have > > > a FreeBSD machine with an internal Courier v.everything modem listening on > > > com1. I am able to get the modem to pick up (either through > > > mgetty/auto_ppp, or through regular getty) and run > > > /usr/local/bin/ppplogin, which consists of just: > > > > > > #!/bin/sh > > > /usr/sbin/ppp -direct server > > > > > > And this is my /etc/ppp/ppp.conf: > > > > > > default: > > > set log debug phase lcp chat > > > set speed 115200 > > > set timeout 0 > > > > > > server: > > > set cd off 40 > > > enable pap > > > enable chap > > > enable passwdauth > > > enable proxy > > > set ifaddr 192.168.1.1 192.168.1.20 255.255.255.255 0.0.0.0 > > > accept dns > > > > > > And this in my /etc/ppp/ppp.secret: > > > > > > ppp dialup > > > > > > And yet, when I try to dialup from Windows 2000, I get: > > > > > > Error 619. The specified port is not connected. > > > > > > And attached is the ppp log of a connection attempt. > > > I have reached an impass, and would really appreciate it if anyone could > > > give me a HINT as to what this is doing. I have no idea if it's getting > > > hung up on password auth or even if it just can't talk the same language. > > > From the log, all I can tell is that a request for CHAP (0x05) auth is > > > made, but other than that, nothing happens! Please please, does anyone > > > know what in the world I might be missing? It has to be user error, right? > > > > > > Thanks in advance. > > > > > [.....] -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 5: 0:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from FreeBSD.KuwaitNet.Net (FreeBSD.KuwaitNet.Net [209.85.227.165]) by hub.freebsd.org (Postfix) with ESMTP id 06B6537B409 for ; Sun, 17 Jun 2001 05:00:13 -0700 (PDT) (envelope-from zaid@DashtiTeam.Com) Received: from localhost (zaid@localhost) by FreeBSD.KuwaitNet.Net (8.11.3/8.11.0) with ESMTP id f5HC0Ch09711 for ; Sun, 17 Jun 2001 05:00:12 -0700 (PDT) Date: Sun, 17 Jun 2001 05:00:09 -0700 (PDT) From: zaid X-X-Sender: To: Subject: dsl modem Message-ID: <20010617045821.U9638-100000@FreeBSD.KuwaitNet.Net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi can i use the dsl modem (USB) (external) under freebsd 4.3 ? thanks bye _________________________________ Feel Free To Contact Me @: ############################## # Zaid Dashti # # Email: Zaid@DashtiTeam.Com # # MSN: Zaid500@hotmail.com # # ICQ: 104341229 # # Phone: (+965) 9844531 # ############################## To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 5:35:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id 2B89337B40F for ; Sun, 17 Jun 2001 05:35:30 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com; Sun, 17 Jun 2001 05:35:30 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: "Ted Mittelstaedt" Date: Sun, 17 Jun 2001 05:35:29 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: Better printing from the command-line Reply-To: pjklist@ekahuna.com Cc: questions@FreeBSD.ORG Message-ID: <3B2C41A1.18892.7E1C97@localhost> In-reply-to: <001f01c0f712$491bbb00$1401a8c0@tedm.placo.com> References: <3B2B8B84.15765.5FC2FA@localhost> X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 17 Jun 2001, at 2:45, Ted Mittelstaedt boldly uttered: > Read this to see how to "write my own scripts just to send > commands to the printer.." it's easier than you think: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/corp-net-guide/index.html Looks like a nice writeup, thanks for the link! I'm printing it now to read shortly. Phil -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 5:50:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from x1-6-00-50-ba-de-36-33.kico1.on.home.com (d141-119-162.home.cgocable.net [24.141.119.162]) by hub.freebsd.org (Postfix) with ESMTP id AB05437B40A for ; Sun, 17 Jun 2001 05:49:53 -0700 (PDT) (envelope-from genisis@istar.ca) Received: from localhost (genisis@localhost) by x1-6-00-50-ba-de-36-33.kico1.on.home.com (8.11.3/8.11.3) with ESMTP id f5HCsgV37463 for ; Sun, 17 Jun 2001 08:54:43 -0400 (EDT) (envelope-from genisis@istar.ca) X-Authentication-Warning: x1-6-00-50-ba-de-36-33.kico1.on.home.com: genisis owned process doing -bs Date: Sun, 17 Jun 2001 08:54:42 -0400 (EDT) From: Dru X-X-Sender: To: Subject: script not found in /usr/local/etc/rc.d Message-ID: <20010617084410.H37439-200000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1785910160-992782482=:37439" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-1785910160-992782482=:37439 Content-Type: TEXT/PLAIN; charset=US-ASCII I've added a script called mnwclient.sh to /usr/local/etc/rc.d: ls -l /usr/local/etc/rc.d/mnwclient.sh -rwxr-xr-x 1 root wheel 635 Jun 17 08:07 /usr/local/etc/rc.d/mnwclient.sh* file /usr/local/etc/rc.d/mnwclient.sh /usr/local/etc/rc.d/mnwclient.sh: Bourne shell script text executable It refers to an executable called mnwclient: ls -l /usr/sbin/mnwclient -rwxr-xr-x 1 root wheel 33518 Jun 17 08:07 /usr/sbin/mnwclient* file /usr/sbin/mnwclient /usr/sbin/mnwclient: perl script text executable However, when I try to start the script manually or when I reboot, I get an error message stating the script is not found: /etc/rc: /usr/local/etc/rc.d/mnwclient.sh: not found What am I missing here besides my sanity? I've attached the script if that helps. TIA, Dru --0-1785910160-992782482=:37439 Content-Type: TEXT/PLAIN; charset=US-ASCII; name=test Content-Transfer-Encoding: BASE64 Content-ID: <20010617085442.T37439@x1-6-00-50-ba-de-36-33.kico1.on.home.com> Content-Description: Content-Disposition: attachment; filename=test IyEvYmluL3NoDQ0KIw0NCiMgbW53Y2xpZW50ICAgICBUaGlzIHNoZWxsIHNj cmlwdCB0YWtlcyBjYXJlIG9mIHN0YXJ0aW5nIGFuZCBzdG9wcGluZw0NCiMg ICAgICAgICAgICAgICBteU5ldFdhdGNobWFuIEFnZW50IGZvciBGcmVlQlNE DQ0KIw0NCiMgZGVzY3JpcHRpb246IG1ud2NsaWVudA0NCiMgdW50ZXN0ZWQg bmVlZHMgZGVmYXVsdCBwYXRocyBvZiAvYmluIGFuZCAvdXNyL2Jpbg0NCg0N CiMgQ2hlY2sgdGhhdCBuZXR3b3JraW5nIGlzIHVwLg0NCiNbICR7TkVUV09S S0lOR30gPSAibm8iIF0gJiYgZXhpdCAwDQ0KDQ0KIyBjaGVjayBpZiB0aGUg bW53Y2xpZW50LnJjIGZpbGUgaXMgcHJlc2VudA0NClsgLWYgL2V0Yy9tbndj bGllbnQucmMgXSB8fCBleGl0IDANDQoNDQojIGNoZWNrIHRvIHNlZSBpZiBt bndjbGllbnQgZXhpc3RzDQ0KWyAtZiAvdXNyL3NiaW4vbW53Y2xpZW50IF0g fHwgZXhpdCAwDQ0KDQ0KaWYgWyAkIyAtZXEgMCAtbyB4JDEgPSB4c3RhcnQg XTsgdGhlbg0NCiAgICAvdXNyL3NiaW4vbW53Y2xpZW50IC1jIC9ldGMvbW53 Y2xpZW50LnJjICYNDQpmaQ0NCg0NCmlmIFsgeCQxID0geHN0b3AgXTsgdGhl bg0NCiAgIC9iaW4va2lsbCBgcHMgfCBncmVwICdwZXJsLiptbndjbGllbnQn IHwgY3V0IC1mIDEgLWQgIiAiYA0NCmZpDQ0KDQ0K --0-1785910160-992782482=:37439-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 5:50: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kendra.ne.mediaone.net (kendra.ne.mediaone.net [24.218.227.234]) by hub.freebsd.org (Postfix) with ESMTP id EEA8A37B407 for ; Sun, 17 Jun 2001 05:49:41 -0700 (PDT) (envelope-from ahd@kew.com) Received: from xena (xena.hh.kew.com [192.168.203.148]) by kendra.ne.mediaone.net (Postfix) with SMTP id CF6F71C6B; Sun, 17 Jun 2001 08:49:30 -0400 (EDT) Message-ID: <000801c0f72b$f25931c0$94cba8c0@xena> From: "Drew Derbyshire" To: "Bill Moran" Cc: References: <007701c0f6de$cef773b0$94cba8c0@xena> <3B2C2B84.8792D238@iowna.com> Subject: Re: Stopping / removing vinum segments Date: Sun, 17 Jun 2001 08:49:28 -0400 Organization: Kendra Electronic Wonderworks (http://www.kew.com/kendra) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG No, I am concerned -- because the next time it will only be half the configuration which is junk. ----- Original Message ----- From: "Bill Moran" To: "Drew Derbyshire" Cc: Sent: Sunday, June 17, 2001 12:01 AM Subject: Re: Stopping / removing vinum segments > If you're not concerned about the data/config, you can do a > "resetconfig" which will blow away everything, or you can force other > commands (such as "stop") to work even if they would normally not with > the -f switch ("force") > > -Bill > > Drew Derbyshire wrote: > > > > Given the following vinum configuration, which is > > a. idle (no file systems exist on the disk) and > > b. wrong > > > > How do I get the objects into a state where I can remove them? Various > > stop commands don't do anything for it. > > > > minerva,~,120# vinum l > > 1 drives: > > D d1 State: up Device /dev/da1s2g Avail: > > 0/16739 MB (0%) > > > > 1 volumes: > > V mirror State: up Plexes: 1 Size: 16 GB > > > > 1 plexes: > > P mirror.p0 C State: up Subdisks: 4 Size: 16 GB > > > > 2 subdisks: > > S vinum.var.s0 State: up PO: 0 B Size: 512 MB > > S vinum.usr.s0 State: up PO: 512 MB Size: 2000 MB > > S vinum.export.s0 State: up PO: 2512 MB Size: 4500 MB > > S vinum.scratch.s0 State: up PO: 7012 MB Size: 9727 MB > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > If a bird in the hand is worth two in the bush, > then what can I get for two hands in the bush? > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 5:50:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id 8CA7537B406 for ; Sun, 17 Jun 2001 05:50:44 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com; Sun, 17 Jun 2001 05:50:44 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: Mike Meyer Date: Sun, 17 Jun 2001 05:50:43 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: Better printing from the command-line Reply-To: pjklist@ekahuna.com Cc: questions@FreeBSD.ORG Message-ID: <3B2C4533.11707.8C0F84@localhost> In-reply-to: <15148.3363.52861.253822@guru.mired.org> References: <6147922@toto.iv> X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 16 Jun 2001, at 20:51, Mike Meyer boldly uttered: > Philip J. Koenig types: > > However I'd like to do some *rudimentary* jazzing up of the > > printouts, ie something as simple as setting the font to 12-pitch > > instead of 10-pitch so that certain manpages and text documents > > don't end up with truncated lines. > > From the sound of things, you're talking about printing flat ascii > text. Since these kinds of things aren't standardized, there really > isn't a generic tool for dealing with them. I've been thinking about > extending magicfilter to add the ability to specify strings to prefix > a print job, which might solve this, but haven't done anything yet. > Personally, I just set those the way I want them on the printer, and > forget about them. You are correct about what I'm printing, just things like manpages and configuration files and logs, etc. I can't really set the printer a certain way because it depends on the job, and because I have over half a dozen machines here that print to that printer from various OS's. > > Even though I'm using the "magicfilter" port which has a specific > > filter for the HP Laserjet, it doesn't appear to have any settings > > which can do something as simple as change the font pitch. I hear > > good things about the "APSfilter" port but that appears to require X, > > which I don't usually run. > > apsfilter doesn't require X, but it defaults to using it if you build > it interactively. Build it with "make -DWITHOUT_X11" and it won't > require X. Hopefully, this will be changed in the future to default to > build without X if X isn't installed. Ah, good info, thanks, I may try that. > In any case, apsfilter doesn't send flat ascii text files to the > printer, so things like the printers font pitch setting don't > matter. It sends ascii text through a2ps, then prints the resulting > postscript. This can be an expensive operation if your printer prints > flat text and doesn't print postscript, and can even cause printouts > to fail on some printers. That's one of the reasons I recommend > magicfilter over apsfilter - magicfilter won't filter flat text > through postscript unless the printer can't handle flat text. > > You can install the a2ps port yourself and do what apsfilter does by > hand if you're happy printing flat text through postscript. I prefer > enscript for this; it's also in the ports tree. Either one of them > have more options than you want to worry about for how to format the > text on the page. The printer supports Postscript 2, and I can see using that if I were using a GUI, but it seems awful complex just to print a few plain ASCII files from the command line. (Things like proportional fonts would actually be unwanted for what I'm doing) > > Is there any other kind of utility with a few basic built-in switches > > to do minor formatting on a Laserjet 4MPlus? This printer supports > > Postscript too but it would seem simpler to just use PCL commands. I > > hope I don't end up having to write my own scripts just to send > > commands to the printer.. > > Ok, the only printer system that might do what you're thinking about > is CUPS. There's a demo of that in the ports tree. It uses the printer > description files that Windows uses, which tells the print system how > to do all these things. You may have to purchase the commercial > version to do what you want, though. Thanks. I'm going to read Ted's writeup on printing and see what I can glean from that first. I think what I need really is just to have a simple way to send some PCL commands to the printer before/after print jobs. I would prefer something with a rudimentary menu for common things (ie set pitch, set lines per inch, margins) but I suppose I can make do with something more manual. (This is all like Deja-Vu from the bad 'ol days printing from DOS programs to laser printers, but even worse because even in those days there were printer control programs and most popular applications understood the various printer options so you didn't usually have to muck around with PCL commands.) Thanks again, Phil -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 6:16:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 1D68037B409 for ; Sun, 17 Jun 2001 06:15:58 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 6476 invoked by uid 100); 17 Jun 2001 13:15:57 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.44428.854605.20679@guru.mired.org> Date: Sun, 17 Jun 2001 08:15:56 -0500 To: pjklist@ekahuna.com Cc: questions@FreeBSD.ORG Subject: Re: Better printing from the command-line In-Reply-To: <3B2C4533.11707.8C0F84@localhost> References: <6147922@toto.iv> <3B2C4533.11707.8C0F84@localhost> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Philip J. Koenig types: > Thanks. I'm going to read Ted's writeup on printing and see > what I can glean from that first. I think what I need really > is just to have a simple way to send some PCL commands to the > printer before/after print jobs. I would prefer something with > a rudimentary menu for common things (ie set pitch, set lines per > inch, margins) but I suppose I can make do with something more > manual. Reading Ted's writeup is probably a good idea. I haven't had a need for it, so haven't read it. Do let us know if you find anything. What I'm contemplating doing to magicfilter is using the lpr "class" option to indicate that something magic should be done. Mostly, I want it to drive the duplexer attached to my lj5m, but the same hooks could be used for a lot of other things. That way, I could do something like "lpr -C duplex filename" or "lpr -C simplex filename"; you could then do "lpr -C pitch10 filename" or "lpr -C pitch12 filename" - all assuming the appropriate configuration had been done. The real catch is that different things should be done for different types of jobs. Trying to make that work in a manner as flexible as magicfilter's basic implementation isn't being easy. > (This is all like Deja-Vu from the bad 'ol days printing from DOS > programs to laser printers, but even worse because even in those days > there were printer control programs and most popular applications > understood the various printer options so you didn't usually have to > muck around with PCL commands.) There's a reason for that. Windows provides an API for printer drivers so that applications don't have to know anything about the printer, which is good. DOS didn't do that, so the applications had to know about all each printer in order to be able to use that printer. This is why a lot of printer emulated other printers - so you had some chance that any given application would be able to use the printer, if not use all of its capabilities. Unix is like DOS in that it doesn't provide an interface, so applications have to know how to talk to the printer. But most applications assume the printer is a postscript printer, and the printer spooler doesn't do much beyond pass bytes to the printer. The only exception I've seen to this was Ultrix, which had an lpr command with all kinds of options for talking to printers - but it only worked with DEC's printers. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 6:24:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailin6.bigpond.com (juicer03.bigpond.com [139.134.6.79]) by hub.freebsd.org (Postfix) with ESMTP id 145ED37B40C for ; Sun, 17 Jun 2001 06:24:37 -0700 (PDT) (envelope-from ronaldsoft@bigpond.com) Received: from JRICE ([139.134.4.57]) by mailin6.bigpond.com (Netscape Messaging Server 4.15) with SMTP id GF2TIA00.A11 for ; Sun, 17 Jun 2001 23:30:10 +1000 Received: from CPE-203-45-98-108.nsw.bigpond.net.au ([203.45.98.108]) by mail2.bigpond.com (Claudes-Confounding-MailRouter V2.9c 3/3501360); 17 Jun 2001 23:25:13 Message-ID: <000801c0f730$d67274d0$6c622dcb@JRICE> From: "Ronaldsoft Network" To: Subject: help Date: Sun, 17 Jun 2001 23:24:27 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C0F784.A6DDA060" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2481.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2481.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C0F784.A6DDA060 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable hi. well i can ping other host's but cant ping my own ip address?? i have = read the documentation a number of times.=20 and also can i connect my freebsd box to a proxy server if i can. (how)? Thanks. - Ronald. ------=_NextPart_000_0005_01C0F784.A6DDA060 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
hi.
  well i can ping other host's = but cant=20 ping my own ip address?? i have read the documentation a number of = times.=20
and also can i connect my freebsd = box to a proxy=20 server if i can. (how)?
 
Thanks.
 
- Ronald.
------=_NextPart_000_0005_01C0F784.A6DDA060-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:13:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.xs4all.nl (smtp3.xs4all.nl [194.109.127.132]) by hub.freebsd.org (Postfix) with ESMTP id 461FC37B406 for ; Sun, 17 Jun 2001 07:12:59 -0700 (PDT) (envelope-from aernoudt@bottemanne.net) Received: from bottemanne.net (a213-84-15-61.adsl.xs4all.nl [213.84.15.61]) by smtp3.xs4all.nl (8.9.3/8.9.3) with ESMTP id QAA01775 for ; Sun, 17 Jun 2001 16:12:57 +0200 (CEST) Message-ID: <3B2CBB41.9FE0F5F2@bottemanne.net> Date: Sun, 17 Jun 2001 16:14:25 +0200 From: Susanne Bottemanne X-Mailer: Mozilla 4.7 [nl] (Win95; U) X-Accept-Language: nl MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: problem with FreeBSD mailinglists Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have tried several times to unsubscribe from advocacy and announce mailinglist. It still keeps sending me email which I do not want to receive anymore. When I unsubscribe, I get the error message that I am not listed as a subscriber, but I do get the email messages !! How can you help me to get me of the lists with the following email address: aernoudt@wanadoo.nl please clear ALL entries ! Thanks, Aernoudt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:23:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from david.siemens.de (david.siemens.de [192.35.17.14]) by hub.freebsd.org (Postfix) with ESMTP id 30E5737B40D for ; Sun, 17 Jun 2001 07:23:12 -0700 (PDT) (envelope-from andre.albsmeier@mchp.siemens.de) X-Envelope-Sender-Is: andre.albsmeier@mchp.siemens.de (at relayer david.siemens.de) Received: from mail1.siemens.de (mail1.siemens.de [139.23.33.14]) by david.siemens.de (8.11.0/8.11.0) with ESMTP id f5HEN6c17799; Sun, 17 Jun 2001 16:23:06 +0200 (MET DST) Received: from curry.mchp.siemens.de (curry.mchp.siemens.de [139.25.42.7]) by mail1.siemens.de (8.11.0/8.11.0) with ESMTP id f5HEN5T24343; Sun, 17 Jun 2001 16:23:05 +0200 (MET DST) Received: (from localhost) by curry.mchp.siemens.de (8.11.3/8.11.3) id f5HEN5u90454; Date: Sun, 17 Jun 2001 16:23:05 +0200 From: Andre Albsmeier To: Mario Doria Cc: FreeBSD Questions Subject: Re: What pop3 server to use? Message-ID: <20010617162305.A63686@curry.mchp.siemens.de> References: <00e001c0f510$057b4360$0a00a8c0@midgar> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <00e001c0f510$057b4360$0a00a8c0@midgar>; from madd@tecdigital.net on Thu, Jun 14, 2001 at 03:24:29PM -0500 X-Echelon: BND CIA NSA Mossad KGB MI6 IRA detonator nuclear assault strike Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 14-Jun-2001 at 15:24:29 -0500, Mario Doria wrote: > Hello, > > To those running a busy pop3 server, and also to those who have had previous > experiences, which one do you recommend for running in FreeBSD? I plan on > using postfix. I use cucipop from ports but you should apply my patch from http://www.freebsd.org/cgi/query-pr.cgi?pr=28099 if you intend to keep a large number of mails in your mailboxes. -Andre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:37:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id F10D137B403 for ; Sun, 17 Jun 2001 07:37:16 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HEXvs12728; Sun, 17 Jun 2001 10:33:58 -0400 (EDT) Message-ID: <3B2CC068.2A0B6C01@iowna.com> Date: Sun, 17 Jun 2001 10:36:24 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Drew Derbyshire Cc: questions@FreeBSD.ORG Subject: Re: Stopping / removing vinum segments References: <007701c0f6de$cef773b0$94cba8c0@xena> <3B2C2B84.8792D238@iowna.com> <000801c0f72b$f25931c0$94cba8c0@xena> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm a little confused here ... you state below that the system is idle and wrong. First off, is the system mounted? (/dev/vinum/mirror) If so, it's certainly not idle. If you want to undo a vinum mirror that's got data on it, you'll probably have to do a dump/redstore - unless somebody knows how to convert a vinum volume to a FFS volume. If it doesn't have any data on it that you're worried about, just do a "resetconfig". Doing so won't affect any non-vinum partitions. (regardless of what you do, I'd dump any important data first) I guess I'm pretty confused as to what's going on here. Can you send the output of "vinum lv -r" so we can see how everything is put together? And where is it mounted? I'm not clear on that. -Bill Drew Derbyshire wrote: > > No, I am concerned -- because the next time it will only be half the > configuration which is junk. > > ----- Original Message ----- > From: "Bill Moran" > To: "Drew Derbyshire" > Cc: > Sent: Sunday, June 17, 2001 12:01 AM > Subject: Re: Stopping / removing vinum segments > > > If you're not concerned about the data/config, you can do a > > "resetconfig" which will blow away everything, or you can force other > > commands (such as "stop") to work even if they would normally not with > > the -f switch ("force") > > > > -Bill > > > > Drew Derbyshire wrote: > > > > > > Given the following vinum configuration, which is > > > a. idle (no file systems exist on the disk) and > > > b. wrong > > > > > > How do I get the objects into a state where I can remove them? Various > > > stop commands don't do anything for it. > > > > > > minerva,~,120# vinum l > > > 1 drives: > > > D d1 State: up Device /dev/da1s2g Avail: > > > 0/16739 MB (0%) > > > > > > 1 volumes: > > > V mirror State: up Plexes: 1 Size: 16 > GB > > > > > > 1 plexes: > > > P mirror.p0 C State: up Subdisks: 4 Size: 16 > GB > > > > > > 2 subdisks: > > > S vinum.var.s0 State: up PO: 0 B Size: 512 > MB > > > S vinum.usr.s0 State: up PO: 512 MB Size: 2000 > MB > > > S vinum.export.s0 State: up PO: 2512 MB Size: 4500 > MB > > > S vinum.scratch.s0 State: up PO: 7012 MB Size: 9727 > MB -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:41:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by hub.freebsd.org (Postfix) with ESMTP id 6906237B40C for ; Sun, 17 Jun 2001 07:41:24 -0700 (PDT) (envelope-from akruijff@dds.nl) Received: from cybertron ([213.10.151.186]) by smtp06.wxs.nl (Netscape Messaging Server 4.05) with SMTP id GF2WSY00.UPA for ; Sun, 17 Jun 2001 16:41:22 +0200 Message-ID: <00e501c0f73b$436c0e20$231fa8c0@dekruijff.nl> From: "Alex" To: X-Mailer: Microsoft Outlook Express 5.50.4522.1200 Subject: crash of (proxy) computer Date: Sun, 17 Jun 2001 16:36:07 +0200 X-Priority: 3 X-MSMail-Priority: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have seen my computer crash a couple time now. The internet is used heavly (max. 512kb/s for the sum of max. 5 computer) each time. Each time i also have a ssh connection on the intranet. I have a 5x86 cytrix ca 100MHz with 32MB memory. and FreeBSD 4.3. I have no clue on how to solve this. In advance tanks, Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:42: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 487C637B406 for ; Sun, 17 Jun 2001 07:41:58 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5HEg1T26691; Sun, 17 Jun 2001 10:42:01 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 17 Jun 2001 10:42:01 -0400 (EDT) From: Joe Clarke To: Dru Cc: Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <20010617084410.H37439-200000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> Message-ID: <20010617104121.S26682-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yep. Take a look at /usr/sbin/mnwclient. I bet it points to /usr/local/bin/perl, or some other Perl path that doesn't exist on your system. Change that, and everything should work. Joe Clarke On Sun, 17 Jun 2001, Dru wrote: > > I've added a script called mnwclient.sh to /usr/local/etc/rc.d: > > ls -l /usr/local/etc/rc.d/mnwclient.sh > -rwxr-xr-x 1 root wheel 635 Jun 17 08:07 /usr/local/etc/rc.d/mnwclient.sh* > > file /usr/local/etc/rc.d/mnwclient.sh > /usr/local/etc/rc.d/mnwclient.sh: Bourne shell script text executable > > It refers to an executable called mnwclient: > ls -l /usr/sbin/mnwclient > -rwxr-xr-x 1 root wheel 33518 Jun 17 08:07 /usr/sbin/mnwclient* > > file /usr/sbin/mnwclient > /usr/sbin/mnwclient: perl script text executable > > However, when I try to start the script manually or when I reboot, I get > an error message stating the script is not found: > > /etc/rc: /usr/local/etc/rc.d/mnwclient.sh: not found > > What am I missing here besides my sanity? I've attached the script if that > helps. > > TIA, > > Dru > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:42:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id E74AF37B40B for ; Sun, 17 Jun 2001 07:42:33 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HEdCs14115; Sun, 17 Jun 2001 10:39:12 -0400 (EDT) Message-ID: <3B2CC1A2.AE3AC38C@iowna.com> Date: Sun, 17 Jun 2001 10:41:38 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: "Rashid N. Achilov" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Docs in SGML References: <01061622231103.21543@sentry.granch.com> <3B2B83DE.1C2E3370@iowna.com> <01061623260305.21543@sentry.granch.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "Rashid N. Achilov" wrote: > Ten (10) years ago in USSR were only DOS boxes (Imagine, NO Windoze :-)) ). > And, of course, no programs with Russian interface. :-)That time I already > was a Programmer :-) Since that I'm got so accustomed to English interface, > that and now for me "1 ﾏﾍﾏﾝﾘ 2 ﾅﾎﾀ 3 ﾍﾏﾔﾒ" (here was used russian letters) > looks like strange and enormous rather "1 Help 2 Menu 3 View". > > Thats way I find all this noise about "localization" useless for me. I can understand that and I respect your ability to work in 2 different languages. Being from the U.S., I'm pretty lazy in that aspect as I've only needed to know English. However, keep in mind that the localization effort is for everyone using a computer. There are probably many, many more people in the USSR that would not be comfortable trying to work in English software than there are people like you. > Well, probably SGML is a future-language. But why would have been remained > text files, and make SGML in additon instead make in replacing? I think you misunderstood. The document is created in SGML, and then programs can convert it. For example, if a man page is written in SGML, it's trivial to convert it HTML (for the hypertext man pages at http://www.FreeBSD.org/cgi/man.cgi) and it's also trivial to convert it to the format that the man program uses. Thus, the docs are maintained in SGML and make is run to convert them to whatever formats they're needed in. It's a programming thing ;) -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:45:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 531CC37B401 for ; Sun, 17 Jun 2001 07:45:22 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5HEjJt26700; Sun, 17 Jun 2001 10:45:20 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 17 Jun 2001 10:45:19 -0400 (EDT) From: Joe Clarke To: Ronaldsoft Network Cc: Subject: Re: help In-Reply-To: <000801c0f730$d67274d0$6c622dcb@JRICE> Message-ID: <20010617104321.K26682-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Do you have the output of ifconfig -a? Do you have a firewall running on this machine? Please send more info regarding your ping problem. As for connecting to a proxy server, I guess it depends on the application you want to run. Netscape, for example, has the ability to connect to proxies via the Edit->Preferences window. Joe Clarke On Sun, 17 Jun 2001, Ronaldsoft Network wrote: > hi. > well i can ping other host's but cant ping my own ip address?? i have read the documentation a number of times. > and also can i connect my freebsd box to a proxy server if i can. (how)? > > Thanks. > > - Ronald. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:47:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 648BA37B403 for ; Sun, 17 Jun 2001 07:47:54 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5HElvB26716; Sun, 17 Jun 2001 10:47:57 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 17 Jun 2001 10:47:57 -0400 (EDT) From: Joe Clarke To: Susanne Bottemanne Cc: Subject: Re: problem with FreeBSD mailinglists In-Reply-To: <3B2CBB41.9FE0F5F2@bottemanne.net> Message-ID: <20010617104550.A26682-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think postmaster@freebsd.org would be a better resource for helping you on this issue. However, you may be subscribed to the list using a different email alias. You might try the: unsubscribe method. Joe Clarke On Sun, 17 Jun 2001, Susanne Bottemanne wrote: > Hi, > > I have tried several times to unsubscribe from advocacy and announce > mailinglist. > It still keeps sending me email which I do not want to receive anymore. > When I unsubscribe, I get the error message that I am not listed as a > subscriber, but I do get the email messages !! > > How can you help me to get me of the lists with the following email > address: > > aernoudt@wanadoo.nl please clear ALL entries ! > > Thanks, > Aernoudt > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:53:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from x1-6-00-50-ba-de-36-33.kico1.on.home.com (d141-119-162.home.cgocable.net [24.141.119.162]) by hub.freebsd.org (Postfix) with ESMTP id F024237B405 for ; Sun, 17 Jun 2001 07:53:09 -0700 (PDT) (envelope-from genisis@istar.ca) Received: from localhost (genisis@localhost) by x1-6-00-50-ba-de-36-33.kico1.on.home.com (8.11.3/8.11.3) with ESMTP id f5HEvl537935; Sun, 17 Jun 2001 10:57:48 -0400 (EDT) (envelope-from genisis@istar.ca) X-Authentication-Warning: x1-6-00-50-ba-de-36-33.kico1.on.home.com: genisis owned process doing -bs Date: Sun, 17 Jun 2001 10:57:47 -0400 (EDT) From: Dru X-X-Sender: To: Joe Clarke Cc: Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <20010617104121.S26682-100000@shumai.marcuscom.com> Message-ID: <20010617105449.I37831-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Joe, Thanks for the response. Checked the shebang, but she was pointing to /usr/bin/perl like she should. When I try to run "/usr/sbin/mnwclient" by hand, I lose my prompt. "ps" shows a PID open for perl, but not for mnwclient. Dru On Sun, 17 Jun 2001, Joe Clarke wrote: > Yep. Take a look at /usr/sbin/mnwclient. I bet it points to > /usr/local/bin/perl, or some other Perl path that doesn't exist on your > system. Change that, and everything should work. > > Joe Clarke > > On Sun, 17 Jun 2001, Dru wrote: > > > > > I've added a script called mnwclient.sh to /usr/local/etc/rc.d: > > > > ls -l /usr/local/etc/rc.d/mnwclient.sh > > -rwxr-xr-x 1 root wheel 635 Jun 17 08:07 /usr/local/etc/rc.d/mnwclient.sh* > > > > file /usr/local/etc/rc.d/mnwclient.sh > > /usr/local/etc/rc.d/mnwclient.sh: Bourne shell script text executable > > > > It refers to an executable called mnwclient: > > ls -l /usr/sbin/mnwclient > > -rwxr-xr-x 1 root wheel 33518 Jun 17 08:07 /usr/sbin/mnwclient* > > > > file /usr/sbin/mnwclient > > /usr/sbin/mnwclient: perl script text executable > > > > However, when I try to start the script manually or when I reboot, I get > > an error message stating the script is not found: > > > > /etc/rc: /usr/local/etc/rc.d/mnwclient.sh: not found > > > > What am I missing here besides my sanity? I've attached the script if that > > helps. > > > > TIA, > > > > Dru > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 7:58:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 1C13D37B405 for ; Sun, 17 Jun 2001 07:58:30 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HEtAs18113; Sun, 17 Jun 2001 10:55:10 -0400 (EDT) Message-ID: <3B2CC560.16B95936@iowna.com> Date: Sun, 17 Jun 2001 10:57:36 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Alex Cc: questions@FreeBSD.ORG Subject: Re: crash of (proxy) computer References: <00e501c0f73b$436c0e20$231fa8c0@dekruijff.nl> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Alex wrote: > > Hi, > > I have seen my computer crash a couple time now. The internet is used heavly > (max. 512kb/s for the sum of max. 5 computer) each time. Each time i also > have a ssh connection on the intranet. I have a 5x86 cytrix ca 100MHz with > 32MB memory. and FreeBSD 4.3. I have no clue on how to solve this. Is it a panic or a freeze? Make sure you have a monitor/keyboard hooked to this thing so you can see panic messages. If it's panicing, the panic messages may be a strong pointer. Could be buggy hardware somewhere. -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 8: 6:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by hub.freebsd.org (Postfix) with ESMTP id 4B1D937B40F for ; Sun, 17 Jun 2001 08:06:47 -0700 (PDT) (envelope-from akruijff@dds.nl) Received: from cybertron ([213.10.151.186]) by smtp06.wxs.nl (Netscape Messaging Server 4.05) with SMTP id GF2XZ901.FOP; Sun, 17 Jun 2001 17:06:45 +0200 Message-ID: <010d01c0f73e$cf42abe0$231fa8c0@dekruijff.nl> From: "Alex" To: "Bill Moran" Cc: References: <00e501c0f73b$436c0e20$231fa8c0@dekruijff.nl> <3B2CC560.16B95936@iowna.com> Subject: Re: crash of (proxy) computer Date: Sun, 17 Jun 2001 17:04:26 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bill wrote: > Alex wrote: > > > > Hi, > > > > I have seen my computer crash a couple time now. The internet is used heavly > > (max. 512kb/s for the sum of max. 5 computer) each time. Each time i also > > have a ssh connection on the intranet. I have a 5x86 cytrix ca 100MHz with > > 32MB memory. and FreeBSD 4.3. I have no clue on how to solve this. > > Is it a panic or a freeze? > Make sure you have a monitor/keyboard hooked to this thing so you can > see panic messages. If it's panicing, the panic messages may be a strong > pointer. Could be buggy hardware somewhere. > > -Bill The computer is not resonive at all. I can not ping to it, and the screensaver is freezed so i can't see anything. It doesn't responed to the keybord to! Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 8:17:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id B5D8037B401 for ; Sun, 17 Jun 2001 08:17:16 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HFDvs22884; Sun, 17 Jun 2001 11:13:57 -0400 (EDT) Message-ID: <3B2CC9C7.ED09BCC1@iowna.com> Date: Sun, 17 Jun 2001 11:16:23 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Alex Cc: questions@FreeBSD.ORG Subject: Re: crash of (proxy) computer References: <00e501c0f73b$436c0e20$231fa8c0@dekruijff.nl> <3B2CC560.16B95936@iowna.com> <010d01c0f73e$cf42abe0$231fa8c0@dekruijff.nl> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Alex wrote: > > Bill wrote: > > Alex wrote: > > > I have seen my computer crash a couple time now. The internet is used > heavly > > > (max. 512kb/s for the sum of max. 5 computer) each time. Each time i > also > > > have a ssh connection on the intranet. I have a 5x86 cytrix ca 100MHz > with > > > 32MB memory. and FreeBSD 4.3. I have no clue on how to solve this. > > > > Is it a panic or a freeze? > > Make sure you have a monitor/keyboard hooked to this thing so you can > > see panic messages. If it's panicing, the panic messages may be a strong > > pointer. Could be buggy hardware somewhere. > > > > -Bill > The computer is not resonive at all. I can not ping to it, and the > screensaver is freezed so i can't see anything. It doesn't responed to the > keybord to! > Alex I'd suspect the network card(s) here. Especially if it's only occurring under busy network traffic. What kind of NIC are you using, and what driver? You may also want to check out some compiled maxs. mbufs could be suspect, but I wouldn't think running out of mbufs would result in a freeze. What does netstat -m show? -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 8:41:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by hub.freebsd.org (Postfix) with ESMTP id C3BF437B409 for ; Sun, 17 Jun 2001 08:41:18 -0700 (PDT) (envelope-from alfatrion@cybertron.tmfweb.nl) Received: from cybertron ([213.10.151.186]) by smtp06.wxs.nl (Netscape Messaging Server 4.05) with SMTP id GF2ZKT00.ZVA; Sun, 17 Jun 2001 17:41:17 +0200 Message-ID: <004701c0f743$a0e33c10$231fa8c0@dekruijff.nl> From: "Alfatrion" To: "Bill Moran" Cc: References: <00e501c0f73b$436c0e20$231fa8c0@dekruijff.nl> <3B2CC560.16B95936@iowna.com> <010d01c0f73e$cf42abe0$231fa8c0@dekruijff.nl> <3B2CC9C7.ED09BCC1@iowna.com> Subject: Re: crash of (proxy) computer Date: Sun, 17 Jun 2001 17:38:53 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > > > I have seen my computer crash a couple time now. The internet is used > > heavly > > > > (max. 512kb/s for the sum of max. 5 computer) each time. Each time i > > also > > > > have a ssh connection on the intranet. I have a 5x86 cytrix ca 100MHz > > with > > > > 32MB memory. and FreeBSD 4.3. I have no clue on how to solve this. > > > > > > Is it a panic or a freeze? > > > Make sure you have a monitor/keyboard hooked to this thing so you can > > > see panic messages. If it's panicing, the panic messages may be a strong > > > pointer. Could be buggy hardware somewhere. > > > > > The computer is not resonive at all. I can not ping to it, and the > > screensaver is freezed so i can't see anything. It doesn't responed to the > > keybord to! > > I'd suspect the network card(s) here. Especially if it's only occurring > under busy network traffic. What kind of NIC are you using, and what > driver? > You may also want to check out some compiled maxs. mbufs could be > suspect, but I wouldn't think running out of mbufs would result in a > freeze. What does netstat -m show? > I have two card (xl0 3com and ed0 RealTek). In emailing with someone outside the questions group i have heared that i may cause my the droping of my pptp connection. So i'm going to replace the card. See what that does. Tanks, Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 8:49:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom01.kundenserver.de (moutvdom01.kundenserver.de [195.20.224.200]) by hub.freebsd.org (Postfix) with ESMTP id 0769537B405 for ; Sun, 17 Jun 2001 08:49:07 -0700 (PDT) (envelope-from root@pukruppa.de) Received: from [195.20.224.209] (helo=mrvdom02.schlund.de) by moutvdom01.kundenserver.de with esmtp (Exim 2.12 #2) id 15BenL-0005AO-00; Sun, 17 Jun 2001 17:48:59 +0200 Received: from pd950c798.dip.t-dialin.net ([217.80.199.152]) by mrvdom02.schlund.de with esmtp (Exim 2.12 #2) id 15Ben8-0005wT-00; Sun, 17 Jun 2001 17:48:47 +0200 Date: Sun, 17 Jun 2001 17:50:24 +0200 (CEST) From: "Peter Ulrich (Uli) Kruppa" X-X-Sender: To: Susanne Bottemanne Cc: Subject: Re: problem with FreeBSD mailinglists In-Reply-To: <3B2CBB41.9FE0F5F2@bottemanne.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You can communicate with the mailing-machine. Send a message To: majordomo@freebsd.org without any subject and simply the word help written in the message body. Uli. On Sun, 17 Jun 2001, Susanne Bottemanne wrote: > Hi, > > I have tried several times to unsubscribe from advocacy and announce > mailinglist. > It still keeps sending me email which I do not want to receive anymore. > When I unsubscribe, I get the error message that I am not listed as a > subscriber, but I do get the email messages !! > > How can you help me to get me of the lists with the following email > address: > > aernoudt@wanadoo.nl please clear ALL entries ! > > Thanks, > Aernoudt > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > *-------------------------------------------------* | www.pukruppa.de www.2000d.de | | | | Wuppertal - Germany | *-------------------------------------------------* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 8:55:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from MCSMTP2.MC.VANDERBILT.EDU (mcsmtp2.mc.Vanderbilt.Edu [160.129.93.208]) by hub.freebsd.org (Postfix) with ESMTP id CB7ED37B405 for ; Sun, 17 Jun 2001 08:55:33 -0700 (PDT) (envelope-from George.Giles@mcmail.vanderbilt.edu) Subject: 4.2 -> 4.3 upgarde ports probelm To: freebsd-questions@freebsd.org X-Mailer: Lotus Notes Release 5.0.1a August 17, 1999 Message-ID: From: George.Giles@mcmail.vanderbilt.edu Date: Sun, 17 Jun 2001 10:54:07 -0500 X-MIMETrack: Serialize by Router on MCSMTP2.MC.vanderbilt.edu/VUMC/Vanderbilt(Release 5.0.3 |March 21, 2000) at 06/17/2001 10:50:08 AM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG A lot of ports will not make after I upgraded from 4.2 to 4.3. I included the ports in the upgraded. Are the ports a problem one by one, or is there a global file that has gone sideways ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 9:15:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kendra.ne.mediaone.net (kendra.ne.mediaone.net [24.218.227.234]) by hub.freebsd.org (Postfix) with ESMTP id C04C537B409 for ; Sun, 17 Jun 2001 09:15:07 -0700 (PDT) (envelope-from ahd@kew.com) Received: from xena (xena.hh.kew.com [192.168.203.148]) by kendra.ne.mediaone.net (Postfix) with SMTP id C6EEC1C6B; Sun, 17 Jun 2001 12:15:06 -0400 (EDT) Message-ID: <000801c0f748$ab47a880$94cba8c0@xena> From: "Drew Derbyshire" To: "Bill Moran" Cc: References: <007701c0f6de$cef773b0$94cba8c0@xena> <3B2C2B84.8792D238@iowna.com> <000801c0f72b$f25931c0$94cba8c0@xena> <3B2CC068.2A0B6C01@iowna.com> Subject: Re: Stopping / removing vinum segments Date: Sun, 17 Jun 2001 12:15:04 -0400 Organization: Kendra Electronic Wonderworks (http://www.kew.com/kendra) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ---- Original Message ----- From: "Bill Moran" To: "Drew Derbyshire" Cc: Sent: Sunday, June 17, 2001 10:36 AM Subject: Re: Stopping / removing vinum segments > I'm a little confused here ... you state below that the system is idle > and wrong. Understandable. The vinum volume was newly created. newfs had not yet been run. Therefore, there was no data and the volume was not being used. The problem with resetconfig is, if I had another volume which WAS live and active, the resetconfig would have smoked that as well. I can't send a vinum ls -r because I did in fact do a a resetconfig this time. > First off, is the system mounted? No. > (/dev/vinum/mirror) If so, it's > certainly not idle. If you want to undo a vinum mirror that's got data > on it, you'll probably have to do a dump/redstore - unless somebody > knows how to convert a vinum volume to a FFS volume. > If it doesn't have any data on it that you're worried about, just do a > "resetconfig". Doing so won't affect any non-vinum partitions. > (regardless of what you do, I'd dump any important data first) I guess > I'm pretty confused as to what's going on here. Can you send the output > of "vinum lv -r" so we can see how everything is put together? And where > is it mounted? I'm not clear on that. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 9:37:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts13-srv.bellnexxia.net (tomts13.bellnexxia.net [209.226.175.34]) by hub.freebsd.org (Postfix) with ESMTP id 41A0D37B408 for ; Sun, 17 Jun 2001 09:36:57 -0700 (PDT) (envelope-from david@skytrackercanada.com) Received: from d.tracker ([65.92.119.116]) by tomts13-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010617163656.GHJZ7196.tomts13-srv.bellnexxia.net@d.tracker> for ; Sun, 17 Jun 2001 12:36:56 -0400 Received: (from david@localhost) by d.tracker (8.11.3/8.11.3) id f5HHaqG20214 for questions@freebsd.org; Sun, 17 Jun 2001 17:36:52 GMT (envelope-from david) Date: Sun, 17 Jun 2001 17:36:52 GMT From: David Banning Message-Id: <200106171736.f5HHaqG20214@d.tracker> To: questions@freebsd.org Subject: which java is basic runtime package Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I want to install mindterm and run in java - it says it needs the java basic runtime package - but there are so many java related prgrams in the ports - which am i looking for? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 9:52:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id AE44737B403 for ; Sun, 17 Jun 2001 09:52:09 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HGmos17642; Sun, 17 Jun 2001 12:48:50 -0400 (EDT) Message-ID: <3B2CE004.5E720577@iowna.com> Date: Sun, 17 Jun 2001 12:51:16 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Drew Derbyshire Cc: questions@FreeBSD.ORG Subject: Re: Stopping / removing vinum segments References: <007701c0f6de$cef773b0$94cba8c0@xena> <3B2C2B84.8792D238@iowna.com> <000801c0f72b$f25931c0$94cba8c0@xena> <3B2CC068.2A0B6C01@iowna.com> <000801c0f748$ab47a880$94cba8c0@xena> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Drew Derbyshire wrote: > > > I'm a little confused here ... you state below that the system is idle > > and wrong. > > Understandable. > > The vinum volume was newly created. newfs had not yet been run. Therefore, > there was no data and the volume was not being used. > > The problem with resetconfig is, if I had another volume which WAS live and > active, the resetconfig would have smoked that as well. I see now. In that case you'd need to use the stop, detach, and rm commands. Some of these will need the -f switch to force the action. It can be done, I've done it. It can be difficult to get the vinum objects into a state where you can do what you want, so if I'm removing things anyway (and I don't care what happens to the data) I usually just do rm -f which will force the removal no matter what's going on. -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:33: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from q.closedsrc.org (ip233.gte15.rb1.bel.nwlink.com [209.20.244.233]) by hub.freebsd.org (Postfix) with ESMTP id 6E74837B408; Sun, 17 Jun 2001 10:32:42 -0700 (PDT) (envelope-from lplist@closedsrc.org) Received: by q.closedsrc.org (Postfix, from userid 1003) id E2B7D55407; Sun, 17 Jun 2001 10:19:44 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by q.closedsrc.org (Postfix) with ESMTP id D34A351610; Sun, 17 Jun 2001 10:19:44 -0700 (PDT) Date: Sun, 17 Jun 2001 10:19:44 -0700 (PDT) From: Linh Pham To: Greg Lehey Cc: "Rev. Joe Doyle" , FreeBSD Questions Subject: Re: APM on IBM TP240 In-Reply-To: <20010617161444.D29315@wantadilla.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 2001-06-17, Greg Lehey scribbled: # Well, it doesn't take long to search for 'apm' in your kernel config # and find: # # > # Power management support (see LINT for more options) # > device apm0 at nexus? disable flags 0x20 # Advanced Power Management # # Does that word 'disable' give you a clue? Remove it, or enable # manually in UserConfig. Also make sure that APM is enabled in /etc/rc.conf... make sure you have the following lines in that file: apm_enable="YES" apmd_enable="YES" if either or both have NO, change them to YES... else add them if they are not there. I have both enabled in my /etc/rc.conf (I have an IBM Thinkpad T21 with FreeBSD 4.3-RELEASE) plus the kernel conf mod... and it works like a charm. Just need to get sound working now ;-) -- Linh Pham [lplist@closedsrc.org] // 404b - Brain not found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:33:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout06.sul.t-online.de (mailout06.sul.t-online.com [194.25.134.19]) by hub.freebsd.org (Postfix) with ESMTP id 2677237B401 for ; Sun, 17 Jun 2001 10:33:29 -0700 (PDT) (envelope-from Ulf.Kister@t-online.de) Received: from fwd02.sul.t-online.de by mailout06.sul.t-online.de with smtp id 15BgQR-0001Oe-05; Sun, 17 Jun 2001 19:33:27 +0200 Received: from harry.my.net (320020256018-0001@[217.2.83.54]) by fwd02.sul.t-online.com with esmtp id 15BgQG-1iU3DUC; Sun, 17 Jun 2001 19:33:16 +0200 Received: (from kister@localhost) by harry.my.net (8.11.4/8.11.1) id f5HHXO601239; Sun, 17 Jun 2001 19:33:24 +0200 (CEST) (envelope-from kister) To: freebsd-questions@FreeBSD.ORG Subject: nautilus-1.0.3 from ports behaves weird From: Ulf.Kister@t-online.de (Ulf Kister) Date: 17 Jun 2001 19:33:24 +0200 Message-ID: <87k82b6mfv.fsf@harry.my.net> Lines: 15 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Sender: 320020256018-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi there, I installed nautilus-1.0.3 from the ports collection and after answering the druid's questions my desktop simply turns gray (unless I start with the "--no-desktop" option) and nothing else happens. Moreover nautilus complains "Unable to find Mozilla with MOZILLA_FIVE_HOME or looking in standard places." - what is this? Serveral processes are running (2 x nautilus-throbber, nautilus, oafd), but nothing else happens any more. Any help would be highly appreciated, later, Ulf To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:38:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.mail.pas.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id C00E037B405 for ; Sun, 17 Jun 2001 10:37:47 -0700 (PDT) (envelope-from leemark@servesyndicate.com) Received: from lee5jsvh9rtokz (pool0339.cvx25-bradley.dialup.earthlink.net [209.179.217.84]) by snipe.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id KAA10434 for ; Sun, 17 Jun 2001 10:37:46 -0700 (PDT) Message-ID: <001701c0f753$fd43f750$54d9b3d1@lee5jsvh9rtokz> From: "Lee Mark Mercado" To: Subject: re : sub domain Date: Sun, 17 Jun 2001 10:36:05 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0014_01C0F719.4FD0A210" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C0F719.4FD0A210 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, im wondering if how i could do a subdomain.mydomain.com & = otherdomain.com using apache 1.3 in my freeBSD box. I have only one IP = for both subdomain.mydomain.com and mydomain.com and otherdomain.com. I tried reading the apache docs and it came up with VIRTUALHOST - and I = did that configuration in my httpd.conf - unfortunately, it didnt work = for me (im sure im missing something important for configuring my = freeBSD box in order VIRTUALHOST to work but i dont know what) Do I need to configure my NAMEDB files for this to work ?=20 need help. thx ------=_NextPart_000_0014_01C0F719.4FD0A210 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi,
 
im wondering if how i = could do a=20 subdomain.mydomain.com & otherdomain.com using apache 1.3 in my = freeBSD box.=20 I have only one IP for both subdomain.mydomain.com and mydomain.com and=20 otherdomain.com.
 
I tried reading the apache docs and it = came up with=20 VIRTUALHOST - and I did that configuration in my httpd.conf -=20 unfortunately, it didnt work for me (im sure im missing something = important for=20 configuring my freeBSD box in order VIRTUALHOST to work but i dont know=20 what)
 
Do I need to configure my NAMEDB files = for this to=20 work ?
 
need help. = thx
------=_NextPart_000_0014_01C0F719.4FD0A210-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:41:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 2280F37B408 for ; Sun, 17 Jun 2001 10:41:22 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 3241 invoked by uid 100); 17 Jun 2001 17:41:21 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.60353.12685.544141@guru.mired.org> Date: Sun, 17 Jun 2001 12:41:21 -0500 To: dev-null@no-id.com Cc: questions@freebsd.org Subject: Re: Linux emulation problem In-Reply-To: <54864435@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG dev-null@no-id.com types: > Hi, > > I'm running FreeBSD 4.2-RELEASE with linux binary emulation. I recently downloaded > the linux port of the opera web browser from www.opera.com, but I'm encountering > a shared library problem that has me a bit puzzled. > > Any suggestions? [...] > bash-2.04$ cp /usr/local/lib/libjpeg.so.9 lib/libjpeg.so.62 > bash-2.04$ cp /usr/local/lib/libpng.so.4 lib/libpng.so.2 > bash-2.04$ export LD_LIBRARY_PATH=./lib Yeah - get linux versions of the libraries it's not finding. You can't use FreeBSD shared libraries for a linux binary. If you do as Kelsey Cummings suggested, and install it from the port, that will install the proper version of those libraries. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:48:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 81AEC37B401 for ; Sun, 17 Jun 2001 10:48:37 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 3403 invoked by uid 100); 17 Jun 2001 17:48:36 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.60788.952889.752649@guru.mired.org> Date: Sun, 17 Jun 2001 12:48:36 -0500 To: Ross Lippert Cc: questions@freebsd.org Subject: Re: cdrecord making bum cds In-Reply-To: <93639996@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ross Lippert types: > Recently, I got a new DVD-rom (IDE). > > When I burn a new data CD with cdrecord, it has trouble mounting > on the dvd rom (though on another machine with my old cdrom, there is > no trouble). > > When I put it in my dvdrom it just pops it back out, and after much > repeated reinsertion it finally takes it and I can mount it. > > I burned the cd with a yamaha scsi cdrw drive. When I put it in the > scsi cdrw drive, it sometimes won't mount, but if I repeatedly eject, > reinsert and try to mount eventually it will (this failure is less common > that the dvdrom failure -- usually, after a couple repeats it works). > > The only variable I can think which really is different is I recently > started using sony cdr's instead of memorex cdr's. Could this me a > quality problem? I've been bit by that one. I don't think it's likely these days, though. Check with the manufacturer of your CDRW and see what they say about different CD manufacturers. One of the times this happened, I fixed the problem by udpating the drive firmware. Again, check with the manufacturer for more information. The support section of their web site is a good place to start. > Has anyone run into this sort of problem? What was the cause? Could > it be the blanks? Are DVD-roms just extra finicky??? I've had a number of times when I couldn't get a cd to burn properly. The other problems have included: 1) cdrecord was fscked up by an upgrade to the system. I had to update the cdrecord port. 2) The cd burner's lens was dirty. I bought a cd lens cleaning kit, and used that. 3) I was trying to burn 680Meg on a 640Meg CD :-(. Using a 700Meg cd solved that one. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:51:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pianosa.catch22.org (pianosa.catch22.org [64.81.48.19]) by hub.freebsd.org (Postfix) with ESMTP id 3E54637B407 for ; Sun, 17 Jun 2001 10:51:22 -0700 (PDT) (envelope-from doyle@nebcorp.com) Received: by pianosa.catch22.org (Postfix, from userid 1004) id 6172817E7; Sun, 17 Jun 2001 10:51:21 -0700 (PDT) Date: Sun, 17 Jun 2001 10:51:21 -0700 From: "Rev. Joe Doyle" To: FreeBSD Questions Subject: Re: APM on IBM TP240 Message-ID: <20010617105120.A12495@nebcorp.com> Reply-To: "Rev . Joe Doyle" Mail-Followup-To: "Rev. Joe Doyle" , FreeBSD Questions References: <20010616165112.C31018@nebcorp.com> <20010617161444.D29315@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.4i In-Reply-To: <20010617161444.D29315@wantadilla.lemis.com>; from grog@FreeBSD.org on Sun, Jun 17, 2001 at 04:14:44PM +0930 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Jun 17, 2001 at 04:14:44PM +0930, Greg Lehey wrote: > On Saturday, 16 June 2001 at 16:51:12 -0700, Rev. Joe Doyle wrote: > > Well, it doesn't take long to search for 'apm' in your kernel config > and find: > > > # Power management support (see LINT for more options) > > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > Does that word 'disable' give you a clue? Remove it, or enable > manually in UserConfig. > *smack forhead* Duh. Thank you for pointing out the obvious. -Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:52:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dragon.realtime.net (dragon.realtime.net [205.238.128.89]) by hub.freebsd.org (Postfix) with SMTP id 56CCC37B409 for ; Sun, 17 Jun 2001 10:52:34 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from don.bga.com ([204.181.162.73]) by dragon.realtime.net ; Sun, 17 Jun 2001 12:52:33 -0600 Message-Id: <5.0.2.1.2.20010617125055.037bba00@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Sun, 17 Jun 2001 12:52:42 -0500 To: "FreeBSD" From: outlawtx@bga.com Subject: connecting postscript network printer Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have a Hewlett-Packard IIISi printer connected directly to my local area network. It is a postscript printer. How do I get FreeBSD to talk to it. I am running version 4.2 of FreeBSD. Thanks in advance, Don James, Austin, Texas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:57: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 472DD37B401 for ; Sun, 17 Jun 2001 10:56:43 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 3623 invoked by uid 100); 17 Jun 2001 17:56:42 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.61274.704322.668319@guru.mired.org> Date: Sun, 17 Jun 2001 12:56:42 -0500 To: Dru Cc: questions@freebsd.org Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <124551256@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dru types: > However, when I try to start the script manually or when I reboot, I get > an error message stating the script is not found: > > /etc/rc: /usr/local/etc/rc.d/mnwclient.sh: not found > > What am I missing here besides my sanity? I've attached the script if that > helps. The #! line in the script is fubar for some reason that's causing the kernel exec to fail. The report back to the shell is that the file isn't executable (stupid, but apparently required by Posix), so the shell reports that it can't find the executable. Joe Clark's guess - that it's pointing at the wrong place - is the usual cause for that. There are other things that might make it do that as well. Can you send just that line? I know you attached the script, but freebsd.org's mail digester eats the MIME headers, so my mailer can't decode what you sent :-(. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 10:59:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id A5F6A37B401 for ; Sun, 17 Jun 2001 10:59:16 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 3705 invoked by uid 100); 17 Jun 2001 17:59:16 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.61428.92995.898654@guru.mired.org> Date: Sun, 17 Jun 2001 12:59:16 -0500 To: George.Giles@mcmail.vanderbilt.edu Cc: questions@freebsd.org Subject: Re: 4.2 -> 4.3 upgarde ports probelm In-Reply-To: <3079549@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG George.Giles@mcmail.vanderbilt.edu types: > A lot of ports will not make after I upgraded from 4.2 to 4.3. > > I included the ports in the upgraded. > > Are the ports a problem one by one, or is there a global file that has gone > sideways ? Without knowing what "will not make" means, it's hard to say. If you left the 4.2 ports in place and installed the 4.3 ports over them, then it's one by one, and the fix is to remove the entire ports tree and reinstall it. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 11:21:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from x1-6-00-50-ba-de-36-33.kico1.on.home.com (d141-119-162.home.cgocable.net [24.141.119.162]) by hub.freebsd.org (Postfix) with ESMTP id A163037B414 for ; Sun, 17 Jun 2001 11:19:30 -0700 (PDT) (envelope-from genisis@istar.ca) Received: from localhost (genisis@localhost) by x1-6-00-50-ba-de-36-33.kico1.on.home.com (8.11.3/8.11.3) with ESMTP id f5HIOFo48205; Sun, 17 Jun 2001 14:24:15 -0400 (EDT) (envelope-from genisis@istar.ca) X-Authentication-Warning: x1-6-00-50-ba-de-36-33.kico1.on.home.com: genisis owned process doing -bs Date: Sun, 17 Jun 2001 14:24:14 -0400 (EDT) From: Dru X-X-Sender: To: Mike Meyer Cc: Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <15148.61274.704322.668319@guru.mired.org> Message-ID: <20010617141853.S48172-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Mike, Forgive the long post, as this time I'll include both scripts instead of sending them as attachments. (feel free to snip the appropriate portions) Thanks for the help guys :) Dru more /usr/local/etc/rc.d/mnwclient.sh #!/bin/sh # # mnwclient This shell script takes care of starting and stopping # myNetWatchman Agent for FreeBSD # # description: mnwclient # untested needs default paths of /bin and /usr/bin # Check that networking is up. #[ ${NETWORKING} = "no" ] && exit 0 # check if the mnwclient.rc file is present [ -f /etc/mnwclient.rc ] || exit 0 # check to see if mnwclient exists [ -f /usr/sbin/mnwclient ] || exit 0 if [ $# -eq 0 -o x$1 = xstart ]; then /usr/sbin/mnwclient -c /etc/mnwclient.rc & fi if [ x$1 = xstop ]; then /bin/kill `ps | grep 'perl.*mnwclient' | cut -f 1 -d " "` fi ************************************************************************* more /usr/sbin/mnwclient #!/usr/bin/perl -w ## ## mnwclient - a Perl client for myNetWatchman ## Copyright (C) 2001 Chad Wagner ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ## ## mnwclient -- a Perl client for myNetWatchman ## $Id: mnwclient,v 1.9 2001/05/01 03:46:12 wagnerch Exp $ use Getopt::Std; use IO::Socket; use POSIX; ## DEFAULTS ## ## configuration file, where configuration parameters are stored $mnwclientrc = "/etc/mnwclient.rc"; ## this is where Packet log kernel messages are logged, typically ## /var/log/messages, but may vary based on distribution. $logfile = "/var/log/messages"; ## user interface to upload packets for $interface = "ppp0"; ## default chain to inspect, typically 'input' @chaintbl = ("input"); ## location to write error messages, success, etc $errorlog = "/var/log/mnwclient.log"; ## gmt correction offset, in seconds. $gmt = 0; ## default delay interval between rescanning log $interval = 60; ## default dequeue interval in seconds. $dqinterval = 1; ## default backoff factor $backoff = 3; ## maximum backoff factor $maxbackoff = 600; ## default debug level $debug = 0; ## DO NOT MODIFY BELOW THIS LINE ## ## version number $mnwvers = "1.9"; ## this is the server and port $server = "www.mynetwatchman.com"; $port = 80; $script = "/insertwebreport.asp"; ## unbuffer i/o $| = 1; ## process switches and arguments getopts("i:c:l:e:zh", \%args); ## set overrides $mnwclientrc = $args{c} if defined $args{c}; ## override rc file $errorlog = $args{e} if defined $args{e}; ## override errors log ## check for invalid conditions, or help request if (defined $args{h}) { printf "%s [-c resource_file] [-l kernel_log_file] [-e errors_log_file]\n\t[-i interface]\n\n",$0; printf " -c resource_file data file that holds configuration parameters\n"; printf " -l kernel_log_file where the kernel logs dropped or filtered packets\n"; printf " -e errors_log_file where this client logs error messages\n"; printf " -i interface upload data for interface\n"; exit 1; } ## open pointer resource file if (open(FD,$mnwclientrc)) { $braces=0; @filtbl=(); while () { $_ =~ s/\n$//g; $_ =~ s/^\s*//g; $_ =~ s/\s*$//g; if (m/^#/ || m/^$/) { ## comment } elsif ((m/^interface\s+(.*)$/) && (!$braces)) { ## interface directive $interface=$1; } elsif ((m/^chain\s+(.*)$/) && (!$braces)) { ## chain directive @chaintbl=split(/,/,$1); } elsif ((m/^errors\s+(.*)$/) && (!$braces)) { ## errors log directive $errorlog=$1; } elsif ((m/^log\s+(.*)$/) && (!$braces)) { ## log directive $logfile=$1; } elsif ((m/^login\s+(.*)$/) && (!$braces)) { ## login directive $agtname=$1; } elsif ((m/^password\s+(.*)$/) && (!$braces)) { ## password directive $agtpass=$1; } elsif ((m/^server\s+(.*)$/) && (!$braces)) { ## server directive $server=$1; } elsif ((m/^port\s+(.*)$/) && (!$braces)) { ## port directive $port=$1; } elsif ((m/^proxy\s+(.*)$/) && (!$braces)) { ## proxy directive ($proxyserver,$proxyport) = split(/:/,$1,2); } elsif ((m/^debug(?:\s+(.*))?$/) && (!$braces)) { ## debug directive if ($1 ne "") { $debug = $1; } else { $debug=1; } } elsif ((m/^quiet$/) && (!$braces)) { ## quiet directive $quiet=1; } elsif ((m/^test$/) && (!$braces)) { ## test directive $test=1; } elsif ((m/^gmt\s+(.*)$/) && (!$braces)) { ## gmt directive $gmt=$1 * 3600; } elsif ((m/^retry\s+(.*)$/) && (!$braces)) { ## retry directive, ignored } elsif ((m/^interval\s+(.*)$/) && (!$braces)) { ## interval directive $interval=$1; } elsif ((m/^dqinterval\s+(.*)$/) && (!$braces)) { ## dqinterval directive $dqinterval=$1; } elsif ((m/^backoff\s+(.*)$/) && (!$braces)) { ## backoff directive $backoff=$1; } elsif ((m/^maxbackoff\s+(.*)$/) && (!$braces)) { ## maxbackoff directive $maxbackoff=$1; } elsif ((m/^filter\s+\{$/) && (!$braces)) { ## filter directive, open braces mode $braces=1; } elsif ((m/^\}$/) && ($braces)) { ## close braces mode $braces=0; } elsif ($braces) { ## braces mode if (m/^source\s+([0-9,\.]+)\s+netmask\s+([0-9,\.]+)$/) { ## filter-source/netmask directive push(@filtbl,[0,$1,$2]); } elsif ((m/^port\s+(\d+)(?:\s+proto\s+(\w+))?$/) || (m/^target\s+port\s+(\d+)(?:\s+proto\s+(\w+))?$/)) { ## filter-target/port/proto directive push(@filtbl,[1,$1,$2]); } elsif (m/^proto\s+(\w+)$/) { ## filter-proto directive push(@filtbl,[2,$1]); } elsif (m/^target\s+([0-9,\.]+)\s+netmask\s+([0-9,\.]+)$/) { ## filter-target/netmask directive push(@filtbl,[3,$1,$2]); } elsif (m/^source\s+port\s+(\d+)(?:\s+proto\s+(\w+))?$/) { ## filter-source/port/proto directive push(@filtbl,[4,$1,$2]); } elsif (m/^target\s+([0-9,\.]+)\s+netmask\s+([0-9,\.]+)\s+xchg\s+([0-9,\.]+)$/) { ## filter-target/netmask/xchg directive push(@filtbl,[5,$1,$2,$3]); } else { ## unknown filter directive printf STDERR "unknown filter directive encountered in configuration file, \"%s\"\n",$_; } } else { ## unknown directive printf STDERR "unknown directive encountered in configuration file, \"%s\"\n",$_; } } close(FD); } else { printf STDERR "failed to open \"%s\" for reading: %s\n",$mnwclientrc,$!; exit 1; } ## warn about resource file being world/group readable/writable $mode = (stat($mnwclientrc))[2]; &warning("configuration file is set world/group readable/writeable.\n") if ($mode & 077); ## override logfile, if set on command line $logfile = $args{l} if defined $args{l}; ## override interface, if set on command line $interface = $args{i} if defined $args{i}; ## check for agent name and password if (!defined $agtname || !defined $agtpass) { &fatal("agent name or password must be defined.\n"); } ## check for valid proxy port, if defined if (defined $proxyserver) { if (!$proxyport) { &fatal("proxy directive has invalid port, or undefined port.\n"); } } ## stat log file and get current size $size = (stat($logfile))[7]; $offset=$size; $offset=0 if defined $args{z}; ## initialize msgq list @msgq=(); ## report version, and state that we are running &printk("mnwclient version %s, monitoring \"%s\" starting at offset %lu\n",$mnwvers,$logfile,$offset); ## initialize several scalars here my($proto)=0; my(%protonum) = ( ## protocol table 'TCP' => 6, ## tcp 'tcp' => 6, ## tcp 'UDP' => 17, ## udp 'udp' => 17, ## udp 'ICMP' => 1, ## icmp 'icmp' => 1 ## icmp ); my($count); ## attack count my($match); ## match regex, used for checking for 'repeated' msgs my($success); ## match regex, used to submit report ## setup currdqinterval equal to dqinterval, and var for lastdq stamp my($currdqinterval) = $dqinterval; my($lastdq) = time; while (1) { ## stat log file and get current size $size = (stat($logfile))[7]; ## if offset is larger then size then logfile has been reset $offset=0 if ($offset > $size); ## read in log file, and store in data array open(FD,$logfile) || &fatal("unable to open kernel log for reading \"%s\": %s\n",$logfile,$!); seek(FD,$offset,SEEK_SET); while () { ## initialize scalars on each looping $count = 1; $success = 0; ## dump debug info &printk("debug: logread [%s]\n",$_) if ($debug >= 9); ## this is our regexp that we are looking to extract meaningful data from if (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+kernel:\s+Packet\s+log:\s+(\w+)\s+(REJECT|DENY)\s+(\w+)\s+PROTO=(\d+)\s+([0-9,\.]+):(\d+)\s+([0-9,\.]+):(\d+)/) { ## deal with ipchains log formatting if (&ischain($2) && $4 eq $interface) { @last = ($1,$5,$6,$7,$8,$9); $match = 1; $success = 1; } else { $match = 0; } } elsif (m/id=firewall/) { ## deal with sonicwall log formatting my($fwtime,$fwc,$fwm,$fwsrcaddr,$fwsrcport,$fwdstaddr,$fwdstport); if (m/time=\"(\d+-\d+-\d+\s+\d+:\d+:\d+(?:\s+UTC)?)\"/) { $fwtime=$1; } if (m/c=(\d+)/) { $fwc=$1; } if (m/m=(\d+)/) { $fwm=$1; } if (m/src=([\w,\.]+)(?::(\d+))?:WAN/) { $fwsrcaddr=$1; $fwsrcport=$2; } if (m/dst=([\w,\.]+)(?::(\d+):\w+)?/) { $fwdstaddr=$1; $fwdstport=$2; } $proto = 0; if ($fwc == 32) { my(%protocvt) = ( ## port/proto -- attack 22 => 1, ## icmp -- ping of death 23 => 0, ## ip -- ip spoof (unsupported) 27 => 6, ## tcp -- land 67 => 0, ## ??? -- ipsec auth failed (unsupported) 70 => 0, ## ??? -- ipsec dropped (unsupported) 72 => 6, ## tcp -- netbus 73 => 6, ## 31337/tcp -- back orifice 74 => 6, ## 1024/tcp -- net spy 75 => 6, ## 27374/tcp -- subseven 76 => 6, ## 2023/tcp -- ripper 77 => 6, ## 2565/tcp -- striker 78 => 17, ## 13000/udp -- senna spy 79 => 6, ## 16969/tcp -- priority 80 => 6, ## 9989/tcp -- inikiller 81 => 1, ## icmp -- smurf 82 => 0, ## ??? -- probable port scan (unsupported) 83 => 0, ## ??? -- probable port scan (unsupported) 84 => 6, ## tcp -- syn port scan 173 => 6 ## tcp -- fin port scan ); $proto = $protocvt{$fwm}; } else { my(%protocvt) = ( ## packets dropped 64 => 6, ## tcp 128 => 17, ## udp 256 => 1 ## icmp ); $proto = $protocvt{$fwc}; } ## check for fwdstport and icmp proto, if not defined assume it is ## type 0 icmp (echo-request) $fwdstport=0 if ($proto == 1 && !defined $fwdstport); ## check for fwsrcport, if not defined then assign it as -1, which is ## 'not displayed' $fwsrcport=-1 if (!defined $fwsrcport); ## must have all necessary fields, and protocol nonzero if (defined $fwtime && defined $fwsrcaddr && defined $fwsrcport && defined $fwdstaddr && defined $fwdstport && $proto) { @last = ($fwtime,$proto,$fwsrcaddr,$fwsrcport,$fwdstaddr,$fwdstport); $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+portsentry\[\d+\]:\s+attackalert:\s+(.+\s+scan|Packet|Connect)\s+from\s+host:\s+\S+\/([0-9,\.]+)\s+to\s+(\w+)\s+port:\s+(\d+)/) { ## deal with portsentry log formatting $proto = $protonum{$4}; @last = ($1,$proto,$3,-1,-1,$5); $match = 1; $success = 1; } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\S+:\s+ipfw:\s+\d+\s+(REJECT|DENY)\s+(TCP|UDP)\s+([0-9,\.]+):(\d+)\s+([0-9,\.]+):(\d+)\s+(\w+)\s+via\s+(\w+)/i) { ## deal with ipfw log formatting udp/tcp (freebsd) $proto = $protonum{$3}; if (&ischain($8) && $9 eq $interface) { @last = ($1,$proto,$4,$5,$6,$7); $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\S+:\s+ipfw:\s+\d+\s+(REJECT|DENY)\s+(ICMP):(\d+)\.(\d+)\s+([0-9,\.]+)\s+([0-9,\.]+)\s+(\w+)\s+via\s+(\w+)/i) { ## deal with ipfw log formatting icmp (freebsd) if (&ischain($8) && $9 eq $interface) { @last = ($1,1,$6,$4,$7,$5); $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\d+:\s+([\*]*)(\w+\s+\d+\s+\d+:\d+:\d+)(?:\.\d+\s+\w+)?:\s+\S+:\s+list\s+(\d+)\s+denied\s+(tcp|udp)\s+([0-9,\.]+)\((\d+)\)\s+->\s+([0-9,\.]+)\((\d+)\),\s+(\d+)\s+packet/i) { ## deal with cisco format tcp/udp if (&ischain($4)) { $proto = $protonum{$5}; @last = ($1,$proto,$6,$7,$8,$9); ## use date from router if not marked invalid @last = ($3,$proto,$6,$7,$8,$9) if ($2 eq ""); $count = $10; $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\d+:\s+([\*]*)(\w+\s+\d+\s+\d+:\d+:\d+)(?:\.\d+\s+\w+)?:\s+\S+:\s+list\s+(\d+)\s+denied\s+(icmp)\s+([0-9,\.]+)\s+->\s+([0-9,\.]+)\s+\((\d+)\/(\d+)\),\s+(\d+)\s+packet/i) { ## deal with cisco format icmp if (&ischain($4)) { @last = ($1,1,$6,$8,$7,$9); ## use date from router if not marked invalid @last = ($3,1,$6,$8,$7,$9) if ($2 eq ""); $count = $10; $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+named\[\d+\]:\s+(denied|unapproved)\s+query\s+from\s+\[([0-9,\.]+)\]\.(\d+)\s+for\s+\"version\.bind/i) { ## deal with version.bind named requests @last = ($1,6,$3,$4,-1,53); $match = 1; $success = 1; } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\S+\s+IP\[Src=([0-9,\.]+)\s+Dst=([0-9,\.]+)\s+(\w+)(?:\s+spo=(\d+)\s+dpo=(\d+))?\]\s*\}\s*S(\d+)>R(\d+)(m|n)D/) { ## (syslog format) zyxel prestige 314/netgear rt314 router ## only 'm'atched or 'n'ot matched 'D'rops if (&ischain($7)) { $proto = $protonum{$4}; if ($proto == 1) { @last = ($1,$proto,$2,-1,$3,8); } else { @last = ($1,$proto,$2,$5,$3,$6); } $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+kernel:\s+(.*):\s+IN=(\S*)\s+OUT=(\S*)\s+(?:MAC=[\d,a-f,:]+\s+)?SRC=([\d,\.]+)\s+DST=([\d,\.]+)\s+LEN=\d+\s+TOS=[\w,x]+\s+PREC=[\w,x]+\s+TTL=\d+\s+ID=\d+\s+(?:DF\s+)?PROTO=(\w+)(?:\s+TYPE=(\d+)\s+CODE=(\d+))?(?:\s+SPT=(\d+)\s+DPT=(\d+))?/) { ## iptables syslog format if (&ischain($2) && $3 eq $interface) { $proto = $protonum{$7}; if ($proto == 1) { ## icmp packet @last = ($1,$proto,$5,-1,$6,$8); } else { ## tcp/udp/? packet @last = ($1,$proto,$5,$10,$6,$11); } $match = 1; $success = 1; } else { $match = 0; } } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Deny\s+inbound\s+(UDP)\s+from\s+([\d,\.]+)\/(\d+)\s+to\s+([\d,\.]+)\/(\d+)/ || m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Deny\s+inbound\s+(\w+)\s+src\s+\w+:\s*([\d,\.]+)\/(\d+)\s+dst\s+\w+:([\d,\.]+)\/(\d+)/ || m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Dst\s+IP\s+is\s+network\/broadcast\s+IP,\s+translation\s+creation\s+failed\s+for\s+(\w+)\s+src\s+\w+:\s*([\d,\.]+)\/(\d+)\s+dst\s+\w+:\s*([\d,\.]+)\/(\d+)/ || m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Inbound\s+(TCP)\s+connection\s+denied\s+from\s+([\d,\.]+)\/(\d+)\s+to\s+([\d,\.]+)\/(\d+)/) { ## PIX-2-106006, inbound UDP packet ## PIX-3-106010, inbound TCP/UDP packet, broadcast destination ## PIX-3-305006, inbound TCP/UDP packet, broadcast destination ## PIX-2-106001, inbound TCP packet $proto = $protonum{$4}; @last = ($1,$proto,$5,$6,$7,$8); $match = 1; $success = 1; } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Deny\s+inbound\s+(icmp)\s+src\s+\w+:\s*([\d,\.]+)\s+dst\s+\w+:\s*([\d,\.]+)\s+\(type\s+(\d+),\s+code\s+(\d+)\)/ || m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Dst\s+IP\s+is\s+network\/broadcast\s+IP,\s+translation\s+creation\s+failed\s+for\s+(icmp)\s+src\s+\w+:\s*([\d,\.]+)\s+dst\s+\w+:\s*([\d,\.]+)\s+\(type\s+(\d+),\s+code\s+(\d+)\)/) { ## PIX-3-106010, inbound ICMP packet, broadcast destination ## PIX-3-305006, inbound ICMP packet, broadcast destination $proto = $protonum{$4}; @last = ($1,$proto,$5,-1,$6,$7); $match = 1; $success = 1; } elsif (m/^(\w+\s+\d+\s+\d+:\d+:\d+)\s+\S+\s+\%PIX-(\d+)-(\d+):\s+Deny\s+(IP)\s+from\s+([\d,\.]+)\s+to\s+([\d,\.]+),\s+IP\s+options/) { ## PIX-2-106012, inbound IP packet ## currently we do nothing with this packet } elsif (m/^\w+\s+\d+\s+\d+:\d+:\d+\s+\S+\s+\%PIX-(\d+)-(\d+):\s+.{0,1}last\s+message\s+repeated\s+(\d+)\s+time/ && $match) { ## our last message was a packet log message, so lets repeated the ## previously collected data n times. $count = $3; $success = 1; } elsif (m/^\w+\s+\d+\s+\d+:\d+:\d+\s+\S+\s+last\s+message\s+repeated\s+(\d+)\s+times/ && $match) { ## our last message was a packet log message, so lets repeated the ## previously collected data n times. $count = $1; $success = 1; } else { ## reset match, and update offset $match = 0; $offset = tell(FD); } if ($success) { $offset = tell(FD); &queue_attack($last[0],$last[1],$last[2],$last[3],$last[4],$last[5],$count); } } close(FD); ## enter interval delay loop, we want to sleep currdqinterval seconds and ## pop a queued attack off the stack and upload it while we are waiting ## for the interval delay loop to elapse. local($then) = time; while ((time - $then) < $interval) { if (($currdqinterval - (time - $lastdq)) > $interval) { &printk("debug: (currdqinterval %lu - (time %lu - lastdq %lu)) > interval %lu\n",$currdqinterval,time,$lastdq,$interval) if ($debug >= 2); ## if interval is greater than current remaining dqinterval then ## just sleep the interval sleep($interval); } elsif (($currdqinterval - (time - $lastdq)) > $dqinterval) { &printk("debug: (currdqinterval %lu - (time %lu - lastdq %lu)) > dqinterval %lu\n",$currdqinterval,time,$lastdq,$dqinterval) if ($debug >= 2); ## if the current remaining dqinterval is greater than dqinterval then ## just sleep the remaining value less one dqinterval sleep($currdqinterval - (time - $lastdq) - $dqinterval); } else { &printk("debug: sleeping currdqinterval %lu - (time %lu - lastdq %lu)\n",$currdqinterval,time,$lastdq) if ($debug >= 2); ## otherwise just sleep the current remaining dqinterval, and then ## dequeue an attack sleep($currdqinterval - (time - $lastdq)); &dequeue_attack; $lastdq = time; } } } ## looks up protocol number in list and shows given name, only icmp, tcp and ## udp are in here, as they are likely most of the traffic. sub show_proto_name { my($num) = shift if @_; my(%protonum) = ( ## protocol table 1 => 'icmp', ## icmp 6 => 'tcp', ## tcp 17 => 'udp' ## udp ); &printk("debug: show_proto_name returning results %s\n",($protonum{$num} eq "" ? $num : $protonum{$num})) if ($debug >= 2); if ($protonum{$num} ne "") { ## we got a valid protocol number, return it's name return $protonum{$num}; } else { ## we got a invalid protocol number, return it's number return $num; } } ## checks to see if matches input chain ## 0 on failure, 1 on success sub ischain { my($in) = shift; foreach (@chaintbl) { if ($in eq $_) { &printk("debug: ischain returning true, %s == %s\n",$in,$_) if ($debug >= 2); return 1; } } &printk("debug: ischain returning false\n") if ($debug >= 2); return 0; } ## checks to see if source address, port, or port and protocol are filtered sub isfiltered { my($proto) = shift; my($srcaddr) = shift; my($srcport) = shift; my($dstaddr) = shift; my($dstport) = shift; my($newdstaddr); my($retcode) = 0; &printk("debug: isfiltered called with arguments %s,%s,%s,%s,%s\n", $$proto,$$srcaddr,$$srcport,$$dstaddr,$$dstport) if ($debug >= 2); ## parse through filter table foreach (@filtbl) { if (@$_[0] == 0) { ## source addr filter if (&maskaddress(@$_[1],@$_[2]) == &maskaddress($$srcaddr,@$_[2])) { $retcode=1; last; } } elsif (@$_[0] == 1) { ## target port filter if (@$_[1] == $$dstport) { ## target port is a filter match if (defined(@$_[2])) { ## is proto specified, at all? if (@$_[2] eq &show_proto_name($$proto)) { $retcode=1; ## proto and port match, reject last; } } else { ## no proto, port already matchs, so reject $retcode=1; last; } } } elsif (@$_[0] == 2) { ## proto filter if (@$_[1] eq &show_proto_name($$proto)) { $retcode=1; ## protocol matches, reject last; } } elsif (@$_[0] == 3) { ## destination addr filter if (&maskaddress(@$_[1],@$_[2]) == &maskaddress($$dstaddr,@$_[2])) { $retcode=1; last; } } elsif (@$_[0] == 4) { ## source port filter if (@$_[1] == $$srcport) { ## source port is a filter match if (defined(@$_[2])) { ## is proto specified, at all? if (@$_[2] eq &show_proto_name($$proto)) { $retcode=1; ## proto and port match, reject last; } } else { ## no proto, port already matchs, so reject $retcode=1; last; } } } elsif (@$_[0] == 5) { ## target address exchange if (&maskaddress(@$_[1],@$_[2]) == &maskaddress($$dstaddr,@$_[2])) { $newdstaddr = @$_[3]; ## address is a match, store the new dstaddr ## in a scalar for use after parsing further ## filter rules } } else { ## unknown filter element &warning("unknown filter element, type=%d\n",@$_[0]); } } ## okay, we did a target...xchg, need to reparse filter table with new ## dstaddr. if (defined $newdstaddr) { $$dstaddr = $newdstaddr; $retcode = &isfiltered($proto,$srcaddr,$srcport,$dstaddr,$dstport); } &printk("debug: isfiltered returning results %s\n",$retcode) if ($debug >= 2); return $retcode; } ## apply netmask to address and return result sub maskaddress { my($address) = shift; my($netmask) = shift; &printk("debug: maskaddress returning results %s\n",&addr_to_32($address) & &addr_to_32($netmask)) if ($debug >= 2); return (&addr_to_32($address) & &addr_to_32($netmask)); } ## convert dotted ip notation to 32-bit number sub addr_to_32 { my($address) = shift; my($a1,$a2,$a3,$a4); ($a1,$a2,$a3,$a4) = split(/\./,$address); &printk("debug: addr_to_32 returning results %s\n",($a1 << 24) | ($a2 << 16) | ($a3 << 8) | $a4) if ($debug >= 2); return ($a1 << 24) | ($a2 << 16) | ($a3 << 8) | $a4; } ## translate date into format required, and utc sub transdate { my($date) = shift; my($time_t); my(%monnum) = ( 'Jan' => 0, 'Feb' => 1, 'Mar' => 2, 'Apr' => 3, 'May' => 4, 'Jun' => 5, 'Jul' => 6, 'Aug' => 7, 'Sep' => 8, 'Oct' => 9, 'Nov' => 10, 'Dec' => 11 ); my($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst); ## if date is in correct format, translate it to utc if ($date =~ m/^(\w+)\s+(\d+)\s+(\d+):(\d+):(\d+)/) { ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time); $time_t = POSIX::mktime($5,$4,$3,$2,$monnum{$1},$year,0,0,$isdst); ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime($time_t + $gmt); return sprintf "%04d-%02d-%02d %02d:%02d:%02d",($year + 1900), ($mon + 1),$mday,$hour,$min,$sec; } elsif ($date =~ m/^(\d+)-(\d+)-(\d+)\s+(\d+):(\d+):(\d+)\s+UTC/) { return sprintf "%04d-%02d-%02d %02d:%02d:%02d",$1,$2,$3,$4,$5,$6; } elsif (($date =~ m/^(\d+)-(\d+)-(\d+)\s+(\d+):(\d+):(\d+)/) || ($date =~ m/^(\d+)\/(\d+)\/(\d+),(\d+):(\d+):(\d+)/)) { ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time); $time_t = POSIX::mktime($6,$5,$4,$3,($2 - 1),($1 - 1900),0,0,$isdst); ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime($time_t + $gmt); return sprintf "%04d-%02d-%02d %02d:%02d:%02d",($year + 1900), ($mon + 1),$mday,$hour,$min,$sec; } ## otherwise we use current utc time ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday) = gmtime(time); return sprintf "%04d-%02d-%02d %02d:%02d:%02d",($year + 1900), ($mon + 1),$mday,$hour,$min,$sec; } ## adds attack data to outbound queue sub queue_attack { my($datetime) = shift; my($proto) = shift; my($srcaddr) = shift; my($srcport) = shift; my($dstaddr) = shift; my($dstport) = shift; my($count) = shift; ## we are going to do some prefiltering, even though in some cases we ## don't know the destination address if (!&isfiltered(\$proto,\$srcaddr,\$srcport,\$dstaddr,\$dstport)) { ## initialize some local variables my($mqe); my($success) = 0; ## first thing we want to do is find a matching entry already in the ## queue, we report time on first attack, this shouldn't be a problem ## unless the interval is set too large, say more than 2 minutes. foreach $mqe (@msgq) { ## if this attack matches a previously queued one then increment ## the attack count. criteria for matching is same proto, ## source address, dest address, dest port. if (@$mqe[1] == $proto && @$mqe[2] eq $srcaddr && @$mqe[4] eq $dstaddr && @$mqe[5] == $dstport) { ## add the attack count of this one to the queued one @$mqe[6] += $count; &printk("debug: incq: %s,%s,%s,%s,%s,%s,%s\n", @$mqe[0],@$mqe[1],@$mqe[2],@$mqe[3],@$mqe[4],@$mqe[5], @$mqe[6]) if ($debug); $success = 1; last; } } ## if it wasn't already in the queue, add it now if (!$success) { ## add it to the outbound attack queue push(@msgq,[&transdate($datetime),$proto,$srcaddr,$srcport,$dstaddr,$dstport,$count]); &printk("debug: addq: %s,%s,%s,%s,%s,%s,%s\n", &transdate($datetime),$proto,$srcaddr,$srcport,$dstaddr,$dstport, $count) if ($debug); } } } ## dequeue attack and upload to server sub dequeue_attack { my($datetime,$proto,$srcaddr,$srcport,$dstaddr,$dstport,$count); my($lastmq,@mqe); ## only process if there is something in queue if ($#msgq >= 0) { ## pull last entry out, and store it in some local variables $lastmq = $msgq[$#msgq]; @mqe = @$lastmq; $datetime = $mqe[0]; $proto = $mqe[1]; $srcaddr = $mqe[2]; $srcport = $mqe[3]; $dstaddr = $mqe[4]; $dstport = $mqe[5]; $count = $mqe[6]; ## attempt to submit the report, if successful then pop it off the msgq if (&submit_report($datetime,$proto,$srcaddr,$srcport,$dstaddr,$dstport,$count)) { ## we can officially pop it off the stack now, since it was ## successfully uploaded. pop(@msgq); &printk("debug: popq: %s,%s,%s,%s,%s,%s\n", $datetime,$proto,$srcaddr,$srcport,$dstaddr,$dstport, $count) if ($debug); } else { ## backoff factor, calculate into currdqinterval $currdqinterval *= $backoff; ## set currdqinterval to maxbackoff if we exceed it $currdqinterval = $maxbackoff if ($currdqinterval > $maxbackoff); ## failed, dump whatever server responded with &warning("unable to upload %d attack(s) from %s:%d to %s:%d/%s, dequeue interval backing off to %lu seconds.\n",$count,$srcaddr,$srcport,$dstaddr,$dstport,&show_proto_name($proto),$currdqinterval); } } } ## uploads data to server and parses ## returns 0 on failure, 1 on success sub submit_report { my($datetime) = shift; my($proto) = shift; my($srcaddr) = shift; my($srcport) = shift; my($dstaddr) = shift; my($dstport) = shift; my($count) = shift; my($request); my($output); my($response); my($sd); my($success) = 0; if ($test) { if (!&isfiltered(\$proto,\$srcaddr,\$srcport,\$dstaddr,\$dstport)) { ## we are in 'test' mode, don't actually upload data &printk("upload %d attack(s) from %s%s to %s%d/%s successful (test mode).\n",$count,$srcaddr,($srcport >= 0 ? sprintf(":%d",$srcport) : ""),($dstaddr ne "-1" ? sprintf("%s:",$dstaddr) : ""),$dstport,&show_proto_name($proto)); } return 1; } ## open new socket to server { local $^W = 0; if (defined $proxyserver && defined $proxyport) { $sd = IO::Socket::INET->new( PeerAddr => $proxyserver, PeerPort => $proxyport, Proto => 'tcp'); ## start building HTTP get request, via proxy $output = sprintf "GET http://%s:%lu%s",$server,$port,$script; } else { $sd = IO::Socket::INET->new( PeerAddr => $server, PeerPort => $port, Proto => 'tcp'); ## start building HTTP get request $output = sprintf "GET %s",$script; } if (!defined($sd)) { ## socket error, we bail out with a failure to retry later &warning("cannot connect to %s: socket: %s\n",$server,$@); return 0; } } ## we only want to probe the IP address if we don't know it, basically for ## log formats such as portsentry. if ($dstaddr eq "-1") { &printk("debug: dstaddr is %s, probing\n",$dstaddr) if ($debug); $dstaddr = sprintf("%s.%s.%s.%s",unpack("C4",(unpack("S n a4 x8",getsockname($sd)))[2])); &printk("debug: acquired %s address from socket probe\n",$dstaddr) if ($debug); } ## check to see if this firewall entry is filtered if (&isfiltered(\$proto,\$srcaddr,\$srcport,\$dstaddr,\$dstport)) { ## packet is filtered, return with a success code &printk("debug: packet is filtered, dropping\n") if ($debug); return 1; } ## build our data submission portion of url $request = sprintf "AgentEmail=%s&AgentPassword=%s&AttackerIP=%s&DestPort=%s&VictimIP=%s&AttackCount=%s&AttackDateTime=%s&ProtocolID=%s",$agtname,$agtpass,$srcaddr,$dstport,$dstaddr,$count,$datetime,$proto; ## convert spaces to %20 $request =~ s/ /%20/g; ## attach data to end of get $output .= sprintf "?%s HTTP/1.0\n",$request; ## build out HTTP GET request $output .= sprintf "Host: %s\n",$server; $output .= "Content-Type: application/x-www-form-urlencoded\n"; $output .= sprintf "User-Agent: myNetWatchman Perl Agent/%s\n\n",$mnwvers; ## send it via the socket created print $sd $output; ## print debugging, if requested &printk("debug: send [%s]\n",$output) if ($debug >= 10); ## read in data from socket, setup for failure $success=0; $response=""; while (<$sd>) { $response .= $_; &printk("debug: read [%s]\n",$_) if ($debug >= 10); if (m/Attack\s+Report\s+Insert\s+Successful/) { ## we were successful, success should be 1 $success=1; } } close($sd); if (!$success) { if ($response =~ m/Error:\s+(.*?)
/) { &warning("error response returned: %s\n",$1); } else { &warning("unknown response on attack insert from %s.\n",$server); } return 0; } else { ## upload successful &printk("upload %d attack(s) from %s%s to %s:%d/%s successful.\n",$count,$srcaddr,($srcport >= 0 ? sprintf(":%d",$srcport) : ""),$dstaddr,$dstport,&show_proto_name($proto)); $currdqinterval = $dqinterval; return 1; } ## should never reach this far return 0; } ## warning message sub warning { printf STDERR "warning: " if (!$quiet); printf STDERR @_ if (!$quiet); &printk(@_); } ## fatal message sub fatal { printf STDERR "fatal: "; printf STDERR @_; &printk(@_); exit 1; } ## print kernel style message to custom log file sub printk { my($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst); my(%months) = ( 0 => 'Jan', 1 => 'Feb', 2 => 'Mar', 3 => 'Apr', 4 => 'May', 5 => 'Jun', 6 => 'Jul', 7 => 'Aug', 8 => 'Sep', 9 => 'Oct', 10 => 'Nov', 11 => 'Dec' ); ## open log file for appending open(LOGMSG,">>".$errorlog) || die "fatal: unable to append to error log: $!\n"; ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime(time); printf LOGMSG "%s %2s %02d:%02d:%02d mnwclient[%d]: ",$months{$mon},$mday, $hour,$min,$sec,$$; printf LOGMSG @_; close(LOGMSG); } On Sun, 17 Jun 2001, Mike Meyer wrote: > Dru types: > > However, when I try to start the script manually or when I reboot, I get > > an error message stating the script is not found: > > > > /etc/rc: /usr/local/etc/rc.d/mnwclient.sh: not found > > > > What am I missing here besides my sanity? I've attached the script if that > > helps. > > The #! line in the script is fubar for some reason that's causing the > kernel exec to fail. The report back to the shell is that the file > isn't executable (stupid, but apparently required by Posix), so the > shell reports that it can't find the executable. > > Joe Clark's guess - that it's pointing at the wrong place - is the > usual cause for that. There are other things that might make it do > that as well. > > Can you send just that line? I know you attached the script, but > freebsd.org's mail digester eats the MIME headers, so my mailer can't > decode what you sent :-(. > > -- > Mike Meyer http://www.mired.org/home/mwm/ > Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 11:46: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 9C99837B406 for ; Sun, 17 Jun 2001 11:45:54 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HIgYs17158; Sun, 17 Jun 2001 14:42:35 -0400 (EDT) Message-ID: <3B2CFAAC.9A7BB1C2@iowna.com> Date: Sun, 17 Jun 2001 14:45:00 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: outlawtx@bga.com Cc: FreeBSD Subject: Re: connecting postscript network printer References: <5.0.2.1.2.20010617125055.037bba00@bga.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG outlawtx@bga.com wrote: > > Hi, > > I have a Hewlett-Packard IIISi printer connected directly to my local area > network. It is a postscript printer. How do I get FreeBSD to talk to > it. I am running version 4.2 of FreeBSD. If it's a network printer (connected via ethernet) check to see if it does LPD print spooling, if so, you can use the native LPD daemon. Then look into either magicfilter or apsfilter - both of which will automagically convert print jobs to the correct postscript format for you. Personally, I use magicfilter, but I don't know if there's any advantage to one or the other of these. -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 11:55:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 4790637B406 for ; Sun, 17 Jun 2001 11:55:44 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 5257 invoked by uid 100); 17 Jun 2001 18:55:43 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15148.64815.545449.372881@guru.mired.org> Date: Sun, 17 Jun 2001 13:55:43 -0500 To: Dru Cc: questions@freebsd.org Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <20010617141853.S48172-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> References: <15148.61274.704322.668319@guru.mired.org> <20010617141853.S48172-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dru types: > > Hi Mike, > > Forgive the long post, as this time I'll include both scripts instead of > sending them as attachments. (feel free to snip the appropriate portions) No problem with the long post. Sending them direct to me as attachments would work; it's sending attachments to -questions - or any other freebsd- list - that doesn't work properly, as the digester throws out the MIME headers. Those scripts start fine for me - they complain about not being able to open files, not about not being able to find the binary. My guess is that the '#!/bin/sh' line in the mnwclient.sh script is mangled in some way that is hidden by more. Try feeding it to sh directly. If you've got a recent version of bash installed, try running it from that as well - bash goes out of it's way to report bad interpreters. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 12:13:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id 708C837B408 for ; Sun, 17 Jun 2001 12:13:22 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 29968 invoked by uid 202); 17 Jun 2001 19:13:21 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 17 Jun 2001 19:13:21 -0000 Message-Id: <5.1.0.14.2.20010617210953.0206b550@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 17 Jun 2001 21:21:33 +0200 To: freebsd-questions@freebsd.org From: Cynic Subject: mouse problem Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi there, I have the following problem with my mouse: I have installed and configured my 4.3-RELEASE box at home, where I have a 3-button Genius serial mouse. I had the cursor, and copy&paste functionality working fine. I then brought this box to my office, and plugged in an "AROWANA Jerry Mouse Serial" (3 buttons). The cursor was there, without any change to the config. Ten minutes ago I realized I had the cursor, but could not copy&paste anything. I ran /stand/sysinstall, Configure -> Mouse, Type -> Auto, Port -> COM1, Enable. I have the cursor moving at the confirmation dialog, however, it disappears as soon as I answer "yes". Now I don't have the cursor in any of the ttys either. The same happens with A4Tech OK-520 (serial, 2 buttons). Any ideas? cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 12:23:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id D44E437B405 for ; Sun, 17 Jun 2001 12:23:38 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 31692 invoked by uid 202); 17 Jun 2001 19:23:37 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 17 Jun 2001 19:23:37 -0000 Message-Id: <5.1.0.14.2.20010617210238.0208bad8@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 17 Jun 2001 21:31:50 +0200 To: freebsd-questions@freebsd.org From: Cynic Subject: samba-devel problem Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi there, I just cvsupped my ports tree, and attempt to build samba-2.2.0 got stuck: # cd /usr/ports/ent/samba-devel/ # make >> samba-2.2.0.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> Attempting to fetch from ftp://ftp.samba.org/pub/samba/./. Receiving samba-2.2.0.tar.gz (5835104 bytes): 100% 5835104 bytes transferred in 78.3 seconds (72.80 kBps) ===> Extracting for samba-2.2.0 >> Checksum OK for samba-2.2.0.tar.gz. ===> Patching form samba-2.2.0 ===> Applying FreeBSD patches for samba-2.2.0 File to patch: and it sits here forever. is the port broken right now? cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 12:49:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id AE1CF37B401 for ; Sun, 17 Jun 2001 12:49:03 -0700 (PDT) (envelope-from toomas.aas@raad.tartu.ee) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id f5HJmvO30279 for ; Sun, 17 Jun 2001 21:48:57 +0200 Message-Id: <200106171948.f5HJmvO30279@lv.raad.tartu.ee> Received: from INFO/SpoolDir by raad.tartu.ee (Mercury 1.48); 17 Jun 01 21:48:58 +0200 Received: from SpoolDir by INFO (Mercury 1.48); 17 Jun 01 21:48:53 +0200 From: "Toomas Aas" Organization: Tartu City Government To: freebsd-questions@freebsd.org Date: Sun, 17 Jun 2001 21:48:45 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Export restrictions for Kerberos? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello! I tried to install krb5 and it basically told me that it is illegal to do so outside of the U.S., because Kerberos contains encryption software that cannot be exported from U.S. I admit that U.S. legislation is not one of my fields of expertise, however, I remember hearing some time ago that lot of U.S. export restrictions for cryptography were removed. Is Kerberos still considered "too good" to be exported from U.S.? If so, what alternatives do you recommend? -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * The cost of living hasn't affected its popularity. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 12:57:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from x1-6-00-50-ba-de-36-33.kico1.on.home.com (d141-119-162.home.cgocable.net [24.141.119.162]) by hub.freebsd.org (Postfix) with ESMTP id 2CFC337B406 for ; Sun, 17 Jun 2001 12:57:20 -0700 (PDT) (envelope-from genisis@istar.ca) Received: from localhost (genisis@localhost) by x1-6-00-50-ba-de-36-33.kico1.on.home.com (8.11.3/8.11.3) with ESMTP id f5HK29948962; Sun, 17 Jun 2001 16:02:09 -0400 (EDT) (envelope-from genisis@istar.ca) X-Authentication-Warning: x1-6-00-50-ba-de-36-33.kico1.on.home.com: genisis owned process doing -bs Date: Sun, 17 Jun 2001 16:02:08 -0400 (EDT) From: Dru X-X-Sender: To: Mike Meyer Cc: Subject: Re: script not found in /usr/local/etc/rc.d In-Reply-To: <15148.64815.545449.372881@guru.mired.org> Message-ID: <20010617160025.M48954-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Mike, You're a genius. Sending the script to vi revealed that every line ended with a pesky ^M character. A ":%! col -bx" in vi took care of that :) Thanks. Dru On Sun, 17 Jun 2001, Mike Meyer wrote: > Dru types: > > > > Hi Mike, > > > > Forgive the long post, as this time I'll include both scripts instead of > > sending them as attachments. (feel free to snip the appropriate portions) > > No problem with the long post. Sending them direct to me as > attachments would work; it's sending attachments to -questions - or > any other freebsd- list - that doesn't work properly, as the digester > throws out the MIME headers. > > Those scripts start fine for me - they complain about not being able > to open files, not about not being able to find the binary. My guess > is that the '#!/bin/sh' line in the mnwclient.sh script is mangled in > some way that is hidden by more. Try feeding it to sh directly. If > you've got a recent version of bash installed, try running it from > that as well - bash goes out of it's way to report bad interpreters. > > -- > Mike Meyer http://www.mired.org/home/mwm/ > Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:15:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id F3EDB37B409 for ; Sun, 17 Jun 2001 13:15:41 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5HKFfX27098; Sun, 17 Jun 2001 16:15:45 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 17 Jun 2001 16:15:41 -0400 (EDT) From: Joe Clarke To: Ulf Kister Cc: Subject: Re: nautilus-1.0.3 from ports behaves weird In-Reply-To: <87k82b6mfv.fsf@harry.my.net> Message-ID: <20010617161506.Y27076-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nautilus and evolution don't work on FreeBSD yet. You're welcome to fix them if you'd like ;-). Send email to gnome@freebsd.org if you have some patches. Joe Clarke On 17 Jun 2001, Ulf Kister wrote: > Hi there, > > I installed nautilus-1.0.3 from the ports collection and after > answering the druid's questions my desktop simply turns gray (unless I > start with the "--no-desktop" option) and nothing else happens. > > Moreover nautilus complains "Unable to find Mozilla with > MOZILLA_FIVE_HOME or looking in standard places." - what is this? > > Serveral processes are running (2 x nautilus-throbber, nautilus, > oafd), but nothing else happens any more. > > Any help would be highly appreciated, > > later, Ulf > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:16:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nsmail.corp.globalstar.com (gibraltar.globalstar.com [207.88.248.142]) by hub.freebsd.org (Postfix) with ESMTP id CD2A337B407 for ; Sun, 17 Jun 2001 13:16:45 -0700 (PDT) (envelope-from crist.clark@globalstar.com) Received: from globalstar.com ([207.88.154.2]) by nsmail.corp.globalstar.com (Netscape Messaging Server 4.15) with ESMTP id GF3CAT00.HFO for ; Sun, 17 Jun 2001 13:16:05 -0700 Message-ID: <3B2D1011.B9F3F2A9@globalstar.com> Date: Sun, 17 Jun 2001 13:16:17 -0700 From: "Crist Clark" Organization: Globalstar LP X-Mailer: Mozilla 4.72 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Modem/PPP Problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am having a strange problem with a PCMCIA modem and PPP on a -STABLE (actually, I think it is from the 4.3-BETA period) box. Things work... kind of... ppp ON blossom> term at OK atdt5551234 CONNECT . . Is what I see, eventually. But as I type, this is how it looks after I type the 'at' command, ppp ON blossom> term a But then as I start to type the 'atdt' more and more of the conversation echoes back. If I keep hitting I see more and more of what happened earlier in the conversation. Since I know how the login proceedes, I can guess at when to type my login name and password, and that part seems to work. I get replies from the device on the other end that things have worked. However, I never successfully switch into packet mode. I've tried letting it auto sense packet mode and telling it to switch (~p). I am not sure if these two issues are related. Nor do I know if the echo problem is software related (ppp(8) or pccard), or if it is a hardware problem (I've used this modem, Megahertz XJ4336, w/o problems in other PCs and it still works fine under Windoze on a different machine). Has anyone seen this problem? Any ideas of what might be going on? If more information is needed, I do have some _long_ PPP logs, but did not include them here. I do get the famous "sio overflow" errors from time to time, but not sure if that has any bearing on the issue. Thanks for any help. -- Crist J. Clark Network Security Engineer crist.clark@globalstar.com Globalstar, L.P. (408) 933-4387 FAX: (408) 933-4926 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:23: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dt051n37.san.rr.com (dt051n37.san.rr.com [204.210.32.55]) by hub.freebsd.org (Postfix) with ESMTP id 33B6F37B405 for ; Sun, 17 Jun 2001 13:22:47 -0700 (PDT) (envelope-from DougB@DougBarton.net) Received: from DougBarton.net (master [10.0.0.2]) by dt051n37.san.rr.com (8.9.3/8.9.3) with ESMTP id NAA28676; Sun, 17 Jun 2001 13:22:34 -0700 (PDT) (envelope-from DougB@DougBarton.net) Message-ID: <3B2D118A.2940737F@DougBarton.net> Date: Sun, 17 Jun 2001 13:22:34 -0700 From: Doug Barton Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Salvo Bartolotta Cc: Peter , Forrest Aldrich , freebsd-questions@FreeBSD.ORG Subject: Re: 4.3-STABLE mergemaster problems References: <992384390.3b269586a92c7@webmail.neomedia.it> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Salvo Bartolotta wrote: > > > After running mergemaster -ai on a newly updated system, i went back to run > > mergemaster -rv > > however it is unable to install files i tell it to. Only saying > > *** Problem installing ./dev/MAKEDEV, it will remain to merge by hand > > It gives this error on every file. > > Is there something wrong with mergemaster in 4.3? > > I am running (right now) a "4.3-STABLE FreeBSD 4.3-STABLE #0: Sun Jun 10 > 17:50:16 CEST" system. > > I saw those errors while running a simple mergemaster -v -d. So I went > diff'ing here and there to see what had just happened. AFAICT, nothing > serious. The files had been correctly updated (despite the messages stating > exactly the contrary). > > You may wish to just run mergemaster once again **after** updating your > configuration files. N.B. in the first run, you will have to ignore the > complaints about the impossibility of installing the various relevant files. > > It seems to be a harmless bug. I simply didn't find time to complain a couple > of days ago, and I almost forgot all about it :-) It's a known bug that I'm going to work on today. If y'all are running -stable you should subscribe to and read the freebsd-stable mailing list. This has been discussed several times there now. Doug -- If you're never wrong, you're not trying hard enough. Do YOU Yahoo!? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:23:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 1606937B403 for ; Sun, 17 Jun 2001 13:23:27 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5HKNUf27507; Sun, 17 Jun 2001 16:23:30 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 17 Jun 2001 16:23:30 -0400 (EDT) From: Joe Clarke To: Cynic Cc: Subject: Re: samba-devel problem In-Reply-To: <5.1.0.14.2.20010617210238.0208bad8@mail.cz> Message-ID: <20010617162242.E27076-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It works for me (yes, what you're seeing usually means the port is "borken"). Control C, and do a make clean. Then, re-cvsup your ports tree. I just did mine at 14:00 EDT. Joe Clarke On Sun, 17 Jun 2001, Cynic wrote: > Hi there, > > I just cvsupped my ports tree, and attempt to build samba-2.2.0 > got stuck: > > # cd /usr/ports/ent/samba-devel/ > # make > >> samba-2.2.0.tar.gz doesn't seem to exist in /usr/ports/distfiles/. > >> Attempting to fetch from ftp://ftp.samba.org/pub/samba/./. > Receiving samba-2.2.0.tar.gz (5835104 bytes): 100% > 5835104 bytes transferred in 78.3 seconds (72.80 kBps) > ===> Extracting for samba-2.2.0 > >> Checksum OK for samba-2.2.0.tar.gz. > ===> Patching form samba-2.2.0 > ===> Applying FreeBSD patches for samba-2.2.0 > File to patch: > > and it sits here forever. is the port broken right now? > > > > cynic@mail.cz > ------------- > And the eyes of them both were opened and they saw that their files > were world readable and writable, so they chmoded 600 their files. > - Book of Installation chapt 3 sec 7 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:24: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dt051n37.san.rr.com (dt051n37.san.rr.com [204.210.32.55]) by hub.freebsd.org (Postfix) with ESMTP id 9D59037B406 for ; Sun, 17 Jun 2001 13:23:58 -0700 (PDT) (envelope-from DougB@DougBarton.net) Received: from DougBarton.net (master [10.0.0.2]) by dt051n37.san.rr.com (8.9.3/8.9.3) with ESMTP id NAA28682; Sun, 17 Jun 2001 13:23:56 -0700 (PDT) (envelope-from DougB@DougBarton.net) Message-ID: <3B2D11DC.3C28ABB7@DougBarton.net> Date: Sun, 17 Jun 2001 13:23:56 -0700 From: Doug Barton Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Peter Cc: freebsd-questions@FreeBSD.ORG Subject: Re: mergemaster problem References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Peter wrote: > > After running mergemaster -ai on a newly updated system, i went back to run > > mergemaster -rv > > however it is unable to install files i tell it to. Only saying > > *** Problem installing ./dev/MAKEDEV, it will remain to merge by hand > > It gives this error on every file. > > Is there something wrong with mergemaster in 4.3? Yes, it's a known problem that I'm going to work on today. If you're running -stable you should be subscribed to and reading the freebsd-stable mailing list. This problem has been discussed there several times now. Doug -- If you're never wrong, you're not trying hard enough. Do YOU Yahoo!? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:41:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dragon.realtime.net (dragon.realtime.net [205.238.128.89]) by hub.freebsd.org (Postfix) with SMTP id B3BC037B408 for ; Sun, 17 Jun 2001 13:41:23 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from don.bga.com ([204.181.162.73]) by dragon.realtime.net ; Sun, 17 Jun 2001 15:41:21 -0600 Message-Id: <5.0.2.1.2.20010617154040.037c2920@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Sun, 17 Jun 2001 15:41:32 -0500 To: "FreeBSD" From: outlawtx@bga.com Subject: are magicfilter and appsfilter for non-postscript printers? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Are magicfilter and appsfilter for non-postscript printers? Thanks in advance, Don James, Austin, Texas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:41:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id 06BEE37B405 for ; Sun, 17 Jun 2001 13:41:23 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 12052 invoked by uid 202); 17 Jun 2001 20:41:21 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 17 Jun 2001 20:41:21 -0000 Message-Id: <5.1.0.14.2.20010617224804.01f8e138@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 17 Jun 2001 22:49:34 +0200 To: freebsd-questions@freebsd.org From: Cynic Subject: Re: samba-devel problem - SOLVED In-Reply-To: <20010617162242.E27076-100000@shumai.marcuscom.com> References: <5.1.0.14.2.20010617210238.0208bad8@mail.cz> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I used a wrong supfile for the update, and actually _didn't_ update the ports-net collection. After update from samba-2.2.0 to samba-2.2.0_2, the make goes on just fine. sorry. At 22:23 17.6. 2001, Joe Clarke wrote the following: -------------------------------------------------------------- >It works for me (yes, what you're seeing usually means the port is >"borken"). Control C, and do a make clean. Then, re-cvsup your ports >tree. I just did mine at 14:00 EDT. > >Joe Clarke > >On Sun, 17 Jun 2001, Cynic wrote: > >> Hi there, >> >> I just cvsupped my ports tree, and attempt to build samba-2.2.0 >> got stuck: >> >> # cd /usr/ports/ent/samba-devel/ >> # make >> >> samba-2.2.0.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> >> Attempting to fetch from ftp://ftp.samba.org/pub/samba/./. >> Receiving samba-2.2.0.tar.gz (5835104 bytes): 100% >> 5835104 bytes transferred in 78.3 seconds (72.80 kBps) >> ===> Extracting for samba-2.2.0 >> >> Checksum OK for samba-2.2.0.tar.gz. >> ===> Patching form samba-2.2.0 >> ===> Applying FreeBSD patches for samba-2.2.0 >> File to patch: >> >> and it sits here forever. is the port broken right now? >> >> >> >> cynic@mail.cz >> ------------- >> And the eyes of them both were opened and they saw that their files >> were world readable and writable, so they chmoded 600 their files. >> - Book of Installation chapt 3 sec 7 >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> >> ------end of quote------ cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 13:48:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta05-svc.ntlworld.com (mta05-svc.ntlworld.com [62.253.162.45]) by hub.freebsd.org (Postfix) with ESMTP id 1DC6A37B405 for ; Sun, 17 Jun 2001 13:48:24 -0700 (PDT) (envelope-from greid@FreeBSD.org) Received: from sobek.openirc.co.uk ([62.252.12.98]) by mta05-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20010617204821.TYGX284.mta05-svc.ntlworld.com@sobek.openirc.co.uk>; Sun, 17 Jun 2001 21:48:21 +0100 Date: Sun, 17 Jun 2001 21:48:20 +0100 (BST) From: George Reid X-Sender: greid@sobek.openirc.co.uk To: outlawtx@bga.com Cc: FreeBSD Subject: Re: are magicfilter and appsfilter for non-postscript printers? In-Reply-To: <5.0.2.1.2.20010617154040.037c2920@bga.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 17 Jun 2001 outlawtx@bga.com wrote: > Are magicfilter and appsfilter for non-postscript printers? Yes. -- +-------------------+---------------------+ | George Reid | FreeBSD Committer | | +44 7740 197460 | greid@FreeBSD.org | +-------------------+---------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 14: 4: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dragon.realtime.net (dragon.realtime.net [205.238.128.89]) by hub.freebsd.org (Postfix) with SMTP id 3EB3637B401 for ; Sun, 17 Jun 2001 14:03:58 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from don.bga.com ([204.181.162.73]) by dragon.realtime.net ; Sun, 17 Jun 2001 16:03:56 -0600 Message-Id: <5.0.2.1.2.20010617160128.037ddec0@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Sun, 17 Jun 2001 16:04:06 -0500 To: FreeBSD-questions@FreeBSD.ORG From: outlawtx@bga.com Subject: printing to a real postscript printer In-Reply-To: References: <5.0.2.1.2.20010617154040.037c2920@bga.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, My next question is this: If I have a real postscript printer connected directly to my local area network, how do I print to it? My printer is an HP Laserjet IIISi (real postscript, no emulation). Thanks, Don James Austin, Texas At 03:48 PM 6/17/01, you wrote: >On Sun, 17 Jun 2001 outlawtx@bga.com wrote: > > > Are magicfilter and appsfilter for non-postscript printers? > >Yes. > >-- >+-------------------+---------------------+ >| George Reid | FreeBSD Committer | >| +44 7740 197460 | greid@FreeBSD.org | >+-------------------+---------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 14: 7:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from imo-m01.mx.aol.com (imo-m01.mx.aol.com [64.12.136.4]) by hub.freebsd.org (Postfix) with ESMTP id 306C737B403 for ; Sun, 17 Jun 2001 14:07:32 -0700 (PDT) (envelope-from Muchacho86@aol.com) Received: from Muchacho86@aol.com by imo-m01.mx.aol.com (mail_out_v30.22.) id n.ad.c1b4e57 (4314) for ; Sun, 17 Jun 2001 17:07:24 -0400 (EDT) From: Muchacho86@aol.com Message-ID: Date: Sun, 17 Jun 2001 17:07:23 EDT Subject: FREE BSD QUESTIONS To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_ad.c1b4e57.285e760b_boundary" X-Mailer: AOL 6.0 for Windows US sub 10520 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_ad.c1b4e57.285e760b_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit DOES FREE BSD HAVE A GRAPHICAL INTERFACE LIKE WINDOWS, OR IS IT LIKE DOS? --part1_ad.c1b4e57.285e760b_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit DOES FREE BSD HAVE A GRAPHICAL INTERFACE LIKE WINDOWS, OR IS IT LIKE DOS? --part1_ad.c1b4e57.285e760b_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 14:31:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta01-svc.ntlworld.com (mta01-svc.ntlworld.com [62.253.162.41]) by hub.freebsd.org (Postfix) with ESMTP id B0A2337B403 for ; Sun, 17 Jun 2001 14:31:26 -0700 (PDT) (envelope-from greid@FreeBSD.org) Received: from sobek.openirc.co.uk ([62.252.12.98]) by mta01-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20010617213123.ZAV351.mta01-svc.ntlworld.com@sobek.openirc.co.uk>; Sun, 17 Jun 2001 22:31:23 +0100 Date: Sun, 17 Jun 2001 22:31:23 +0100 (BST) From: George Reid X-Sender: greid@sobek.openirc.co.uk To: Muchacho86@aol.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FREE BSD QUESTIONS In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 17 Jun 2001 Muchacho86@aol.com wrote: > DOES FREE BSD HAVE A GRAPHICAL INTERFACE LIKE WINDOWS, OR IS IT LIKE DOS? Yes, it has the ability to run X-Window. Do you have a capslock key on your keyboard? Try pressing it and stop SHOUTING. -- +-------------------+---------------------+ | George Reid | FreeBSD Committer | | +44 7740 197460 | greid@FreeBSD.org | +-------------------+---------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 14:35:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.takas.lt (srvr2.telecom.lt [212.59.0.1]) by hub.freebsd.org (Postfix) with ESMTP id C8DFE37B403 for ; Sun, 17 Jun 2001 14:35:05 -0700 (PDT) (envelope-from tadas@tadas.lt) Received: from tadas.lt (flatrate614.kns.takas.lt [213.190.61.172]) by mail.takas.lt (8.9.1/8.9.0) with ESMTP id XAA1481559 for ; Sun, 17 Jun 2001 23:35:01 +0200 (GMT+0200) Received: (from tadas@localhost) by tadas.lt (8.11.3/8.11.3) id f5HLZlq02730 for freebsd-questions@freebsd.org; Sun, 17 Jun 2001 23:35:47 +0200 (EET) (envelope-from tadas) Date: Sun, 17 Jun 2001 23:35:46 +0200 From: Tadas To: FreeBSD Subject: Threading Message-ID: <20010617233546.C425@tadas.lt> Reply-To: b-tadas@takas.lt Mail-Followup-To: FreeBSD Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.18i X-OS: FreeBSD 4.0-RELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I would like to learn about threads. Are there any guide on the net about posix threads? Bye, Tadas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 14:46:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from itouch.co.nz (itouch.co.nz [203.99.66.188]) by hub.freebsd.org (Postfix) with ESMTP id 0A6D037B40C for ; Sun, 17 Jun 2001 14:46:05 -0700 (PDT) (envelope-from jonc@itouch.co.nz) Received: (from jonc@localhost) by itouch.co.nz (8.11.3/8.11.1) id f5HLiHD27601; Mon, 18 Jun 2001 09:44:17 +1200 (NZST) (envelope-from jonc) Date: Mon, 18 Jun 2001 09:44:17 +1200 From: Jonathan Chen To: Odhiambo Washington Cc: "H. Wade Minter" , FBSD-Q Subject: Re: How do I mount a iso9660 file image? Message-ID: <20010618094417.B23548@itouchnz.itouch> References: <200106130237.f5D2bQu15781@monk.via.net> <20010612223810.T27503-100000@ashburn.skiltech.com> <20010613092405.D97342@everest.wananchi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010613092405.D97342@everest.wananchi.com>; from wash@wananchi.com on Wed, Jun 13, 2001 at 09:24:05AM +0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Jun 13, 2001 at 09:24:05AM +0300, Odhiambo Washington wrote: > * H. Wade Minter [20010613 05:36]: writing on the subject 'Re: How do I mount a iso9660 file image?' > H.> vnconfig vn0c /path/to/file.iso > H.> mount -t cd9660 /dev/vn0c /path/to/mountpoint > > Did I hear that you _must_ have compiled a kernel with > > pseudo_device vn > > before you can do this, or did that change at some point? > > You don't need to compile a kernel with the option. vnconfig will automatically load the vn.ko module; if it hasn't been compiled in. -- Jonathan Chen ---------------------------------------------------------------------- Opportunities are seldom labeled To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:10:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 5357637B406 for ; Sun, 17 Jun 2001 15:10:31 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5HMASl63076; Sun, 17 Jun 2001 15:10:28 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: Cc: Subject: RE: Better printing from the command-line Date: Sun, 17 Jun 2001 15:10:28 -0700 Message-ID: <000001c0f77a$50ef3a60$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <3B2C41A1.18892.7E1C97@localhost> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG No problem, and if you need to know any of the HP codes let me know I've got several printouts of them. They are up on HP's website but they are kind of difficult to find. The chapter has an example that sends a command to an HP that switches on and off CR/LF or LF-only mode, use this and substitute the appropriate commands for font selection, duplexing, landscape/portriate, etc. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Philip J. >Koenig >Sent: Sunday, June 17, 2001 5:35 AM >To: Ted Mittelstaedt >Cc: questions@FreeBSD.ORG >Subject: RE: Better printing from the command-line > > >On 17 Jun 2001, at 2:45, Ted Mittelstaedt boldly uttered: > > >> Read this to see how to "write my own scripts just to send >> commands to the printer.." it's easier than you think: >> >> >http://www.freebsd.org/doc/en_US.ISO8859->1/books/corp-net-guide/index.html > > >Looks like a nice writeup, thanks for the link! I'm printing it now >to read shortly. > > >Phil > > > >-- >Philip J. Koenig pjklist@ekahuna.com >Electric Kahuna Systems -- Computers & Communications for the New Millenium > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:15: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 170D037B406 for ; Sun, 17 Jun 2001 15:14:50 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5HMEgl63091; Sun, 17 Jun 2001 15:14:42 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Mike Meyer" Cc: Subject: RE: Better printing from the command-line Date: Sun, 17 Jun 2001 15:14:42 -0700 Message-ID: <000201c0f77a$e869ea20$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <3B2C4533.11707.8C0F84@localhost> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Philip J. >Koenig >Sent: Sunday, June 17, 2001 5:51 AM >To: Mike Meyer >Cc: questions@FreeBSD.ORG >Subject: Re: Better printing from the command-line > > >On 16 Jun 2001, at 20:51, Mike Meyer boldly uttered: > > >> Philip J. Koenig types: >> > However I'd like to do some *rudimentary* jazzing up of the >> > printouts, ie something as simple as setting the font to 12-pitch >> > instead of 10-pitch so that certain manpages and text documents >> > don't end up with truncated lines. >> >> From the sound of things, you're talking about printing flat ascii >> text. Since these kinds of things aren't standardized, there really >> isn't a generic tool for dealing with them. I've been thinking about >> extending magicfilter to add the ability to specify strings to prefix >> a print job, which might solve this, but haven't done anything yet. >> Personally, I just set those the way I want them on the printer, and >> forget about them. > > >You are correct about what I'm printing, just things like manpages >and configuration files and logs, etc. > >I can't really set the printer a certain way because it depends on >the job, and because I have over half a dozen machines here that >print to that printer from various OS's. > A quick and easy way is to define multiple printcap entries that set the printer to do what you want. For example, suppose that "lp" is connected to the HP. Add definitions for "lp-raw" (unadulterated) or "lp-land" (landscape) or "lp-132" for 132-column printing, etc. etc. When each definition is selected by the program (usually lp -P lp-raw or some such) the associated filter adds in the commands to switch on the special features before the job prints and trails them with the code to switch the printer back to normal mode. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:17:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pltn13.pbi.net (mta8.pltn13.pbi.net [64.164.98.22]) by hub.freebsd.org (Postfix) with ESMTP id 31DF837B403 for ; Sun, 17 Jun 2001 15:17:21 -0700 (PDT) (envelope-from jazepeda@pacbell.net) Received: from zippy.mybox.zip ([207.214.149.226]) by mta8.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GF300IJKHSU4A@mta8.pltn13.pbi.net> for questions@freebsd.org; Sun, 17 Jun 2001 15:14:56 -0700 (PDT) Received: by zippy.mybox.zip (Postfix, from userid 1000) id E696B1856; Sun, 17 Jun 2001 15:14:53 -0700 (PDT) Date: Sun, 17 Jun 2001 15:14:53 -0700 From: Alex Zepeda Subject: how to get IPv6 router advertisement to work? To: questions@freebsd.org Message-id: <20010617151453.A617@zippy.mybox.zip> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Out of curiosity I decided to play around with the IPv6 stuff in FreeBSD and NetBSD. I've got two computers on a 5 port switch: * zippy is an ia32 machine running FreeBSD-current (recent buildworld and kernel), with a dialup modem (tun0/cuaa0) to the outside world and an Intel NIC (fxp0) connected to sproing. Its internal IPv4 addy is 10.0.0.1, and it does NAT for sproing. * sproing is a Quadra 650 running NetBSD-current (recent kernel, 1.5 world). It's using the internal ethernet hardware (sn0). It's also nfs mounting everything (V2/UDP). It's got its default route set to 10.0.0.1 for IPv4 traffic. So I stuck the appropiate autoconfig options in NetBSD's rc.conf for the IPv6 stuff: defaultroute="10.0.0.1" ip6mode="autohost" rtsol="YES" rtsol_flags="sn0" And then put this in zippy's rc.conf (the IPv6 prefix is bogus, but I intend to use freenet6 eventually): ipv6_enable="YES" ipv6_prefix_fxp0="3ffe:8000:ffff:1005" ipv6_gateway_enable="YES" ipv6_router_enable="YES" ipv6_network_interfaces="fxp0" rtadvd_interfaces="fxp0" fxp0: flags=8843 mtu 1500 inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255 inet6 fe80::290:27ff:fed1:836a%fxp0 prefixlen 64 scopeid 0x1 inet6 3ffe:8000:ffff:1005:290:27ff:fed1:836a prefixlen 64 inet6 3ffe:8000:ffff:1005:: prefixlen 64 anycast ether 00:90:27:d1:83:6a media: Ethernet autoselect (100baseTX ) status: active sproing:~#ifconfig sn0 sn0: flags=8863 mtu 1500 inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255 inet6 fe80::a00:7ff:fe36:54%sn0 prefixlen 64 scopeid 0x1 The big problem I'm seeing however seems to be from rtadvd on zippy: Jun 17 15:06:57 zippy rtadvd[975]: sendmsg on fxp0: Permission denied Enabling the debug output, everything else seems to be normal. Any suggestions? - alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:18:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lh11.opsion.fr (lh11.opsion.fr [212.73.208.237]) by hub.freebsd.org (Postfix) with SMTP id 45AF137B405 for ; Sun, 17 Jun 2001 15:18:42 -0700 (PDT) (envelope-from lucas@ifrance.com) Received: from 212.47.232.198 [212.47.232.198] by lh11.opsion.fr; Sun, 17 Jun 2001 22:20:56 GMT Message-ID: <000a01c0f77b$4c668880$c6e82fd4@hugo> From: "Hugo" To: Subject: about freebsd system requirement Date: Mon, 18 Jun 2001 00:17:28 +0200 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C0F78C.0F477FC0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG C'est un message de format MIME en plusieurs parties. ------=_NextPart_000_0007_01C0F78C.0F477FC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear you :), What is the system requirement of free bsd i've got a P90 with 16 Mo of = Ram is it too poor to be server? hugo ------=_NextPart_000_0007_01C0F78C.0F477FC0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Dear you :),
 
What is the system requirement of free = bsd i've got=20 a P90 with 16 Mo of Ram is it too poor to be server?
 
hugo
------=_NextPart_000_0007_01C0F78C.0F477FC0-- ______________________________________________________________________________ ifrance.com, l'email gratuit le plus complet de l'Internet ! vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP... http://www.ifrance.com/_reloc/email.emailif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:21: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id EF9DC37B409 for ; Sun, 17 Jun 2001 15:21:01 -0700 (PDT) (envelope-from fgleiser@cactus.fi.uba.ar) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.3/8.9.3) with ESMTP id f5HML2q35267; Sun, 17 Jun 2001 19:21:02 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Sun, 17 Jun 2001 19:21:02 -0300 (ART) From: Fernando Gleiser To: Tadas Cc: FreeBSD Subject: Re: Threading In-Reply-To: <20010617233546.C425@tadas.lt> Message-ID: <20010617191243.U29247-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 17 Jun 2001, Tadas wrote: > I would like to learn about threads. Are there any guide on the net > about posix threads? I don't know any guides on the net. But "Programming with POSIX threads" by David Butenhof, ISBN 0-201-63392-2 is a very good book on the subject. Also, chapter 23 of "Unix Network Programming, 2e Vol 1" by W. Richard Stevens (which is *the* guide to network programming) covers the subject. > > Bye, > Tadas > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:22: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freeze.org (www.stelesys.com [208.177.187.226]) by hub.freebsd.org (Postfix) with ESMTP id C0AF537B403 for ; Sun, 17 Jun 2001 15:21:55 -0700 (PDT) (envelope-from jim@freeze.org) Received: (from jim@localhost) by freeze.org (8.11.3/8.11.2) id f5HMLpH70260; Sun, 17 Jun 2001 18:21:51 -0400 (EDT) (envelope-from jim) X-Authentication-Warning: www.stelesys.com: Processed from queue /var/spool/alt_queue X-Authentication-Warning: www.stelesys.com: Processed by jim with -C /web/siteinfo/freeze/mail/sendmail.cf Date: Sun, 17 Jun 2001 18:21:50 -0400 (EDT) From: Jim Freeze X-X-Sender: To: Subject: Magicwriter CD-Rewritable Drive Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all: Will the Macgicwriter CD-rewritable drive (made by I/O magic) work with FreeBSD 3.4R? ========================================================= Jim Freeze jim@freeze.org --------------------------------------------------------- No comment at this time. http://www.freeze.org ========================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:25:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rhymer.cogsci.ed.ac.uk (rhymer.cogsci.ed.ac.uk [129.215.144.8]) by hub.freebsd.org (Postfix) with ESMTP id 19F8137B406 for ; Sun, 17 Jun 2001 15:25:38 -0700 (PDT) (envelope-from richard@cogsci.ed.ac.uk) Received: from banks.cogsci.ed.ac.uk (banks [129.215.144.55]) by rhymer.cogsci.ed.ac.uk (8.9.3/8.9.3) with ESMTP id XAA10676; Sun, 17 Jun 2001 23:25:36 +0100 (BST) Received: (from richard@localhost) by banks.cogsci.ed.ac.uk (8.9.3+Sun/8.9.3) id XAA20507; Sun, 17 Jun 2001 23:25:09 +0100 (BST) Date: Sun, 17 Jun 2001 23:25:09 +0100 (BST) Message-Id: <200106172225.XAA20507@banks.cogsci.ed.ac.uk> From: Richard Tobin Subject: Re: dsl modem To: zaid , In-Reply-To: zaid's message of Sun, 17 Jun 2001 05:00:09 -0700 (PDT) Organization: just say no Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > can i use the dsl modem (USB) (external) under freebsd 4.3 ? Depends which one. If it's the Alcatel Speedtouch, see http://www.xsproject.org/speedtouch/ -- Richard To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:37:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from propane.zoomph.net (propane.zoomph.net [209.26.220.133]) by hub.freebsd.org (Postfix) with SMTP id 1CBB837B408 for ; Sun, 17 Jun 2001 15:37:18 -0700 (PDT) (envelope-from anonymous@propane.zoomph.net) Received: (qmail 38921 invoked by uid 97); 17 Jun 2001 22:37:17 -0000 Date: 17 Jun 2001 22:37:17 -0000 Message-ID: <20010617223717.38920.qmail@propane.zoomph.net> To: freebsd-questions@freebsd.org From: dev-null@no-id.com Reply-To: freebsd-questions@freebsd.org Subject: Opera (was: Linux emulation problem) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok, this isn't a question per se. I did as the two kind replies suggested and installed the linux libs from ports. Now opera is working. But it's not just working. It's working GREAT! ;-) Unlike that memory scrooge bug farm Nutscrape, Opera isn't crashing/freezing itself, nor is it bringing X down. I'm so impressed with it that I thought it was my responsibility to lighten the path for other readers of this list who may be experiencing Netscape troubles of their own.... Regards. -- This message has been sent via an anonymous mail relay at www.no-id.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:42:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bryden.apana.org.au (bryden.apana.org.au [203.3.126.129]) by hub.freebsd.org (Postfix) with ESMTP id E228037B401 for ; Sun, 17 Jun 2001 15:42:16 -0700 (PDT) (envelope-from dougy@brizzie.org) Received: from dougy (dougy.apana.org.au [203.3.126.131]) by bryden.apana.org.au (8.9.3/8.9.3) with SMTP id IAA02057; Mon, 18 Jun 2001 08:40:15 +1000 (EST) (envelope-from dougy@brizzie.org) Message-ID: <003201c0f77f$bf0a3b80$837e03cb@apana.org.au> From: "Doug Young" To: "Hugo" , References: <000a01c0f77b$4c668880$c6e82fd4@hugo> Subject: Re: about freebsd system requirement Date: Mon, 18 Jun 2001 08:49:18 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_002F_01C0F7D3.8FCB4F40" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_002F_01C0F7D3.8FCB4F40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I've got a number of 1985 vintage 386sx25 mit 16Mb RAM gateway boxes for = office LANs & running apache / sendmail / cucipop .... none of them have = missed a beat since last O/S update around a year ago They are dedicated machines though .... all straight command line & = don't=20 double as workstations ----- Original Message -----=20 From: Hugo=20 To: freebsd-questions@FreeBSD.ORG=20 Sent: Monday, June 18, 2001 8:17 AM Subject: about freebsd system requirement Dear you :), What is the system requirement of free bsd i've got a P90 with 16 Mo = of Ram is it too poor to be server? hugo ------=_NextPart_000_002F_01C0F7D3.8FCB4F40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I've got a number of 1985 vintage = 386sx25 mit 16Mb=20 RAM gateway boxes for
office LANs & running apache / = sendmail /=20 cucipop .... none of them have
missed a beat since=20 last O/S update around a year ago
 
They are dedicated machines though .... = all=20 straight command line & don't
double as workstations
 
----- Original Message -----
From:=20 Hugo
To: freebsd-questions@FreeBSD.O= RG=20
Sent: Monday, June 18, 2001 = 8:17 AM
Subject: about freebsd system=20 requirement

Dear you :),
 
What is the system requirement of = free bsd i've=20 got a P90 with 16 Mo of Ram is it too poor to be server?
 
hugo
------=_NextPart_000_002F_01C0F7D3.8FCB4F40-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:45:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 7EA8E37B401 for ; Sun, 17 Jun 2001 15:45:30 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5HMgAs15298; Sun, 17 Jun 2001 18:42:10 -0400 (EDT) Message-ID: <3B2D32D4.B0CF0885@iowna.com> Date: Sun, 17 Jun 2001 18:44:36 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: outlawtx@bga.com Cc: FreeBSD-questions@FreeBSD.ORG Subject: Re: printing to a real postscript printer References: <5.0.2.1.2.20010617154040.037c2920@bga.com> <5.0.2.1.2.20010617160128.037ddec0@bga.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG magicfilger & apsfilter can help as well. Read the docs. -Bill outlawtx@bga.com wrote: > > Hi, > > My next question is this: If I have a real postscript printer > connected directly to my local area network, how do I print to it? My > printer is an HP Laserjet IIISi (real postscript, no emulation). > > Thanks, > > Don James > Austin, Texas > > At 03:48 PM 6/17/01, you wrote: > >On Sun, 17 Jun 2001 outlawtx@bga.com wrote: > > > > > Are magicfilter and appsfilter for non-postscript printers? > > > >Yes. > > > >-- > >+-------------------+---------------------+ > >| George Reid | FreeBSD Committer | > >| +44 7740 197460 | greid@FreeBSD.org | > >+-------------------+---------------------+ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:49:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rhymer.cogsci.ed.ac.uk (rhymer.cogsci.ed.ac.uk [129.215.144.8]) by hub.freebsd.org (Postfix) with ESMTP id 2656737B405 for ; Sun, 17 Jun 2001 15:49:35 -0700 (PDT) (envelope-from richard@cogsci.ed.ac.uk) Received: from banks.cogsci.ed.ac.uk (banks [129.215.144.55]) by rhymer.cogsci.ed.ac.uk (8.9.3/8.9.3) with ESMTP id XAA10910; Sun, 17 Jun 2001 23:49:33 +0100 (BST) Received: (from richard@localhost) by banks.cogsci.ed.ac.uk (8.9.3+Sun/8.9.3) id XAA20553; Sun, 17 Jun 2001 23:49:06 +0100 (BST) Date: Sun, 17 Jun 2001 23:49:06 +0100 (BST) Message-Id: <200106172249.XAA20553@banks.cogsci.ed.ac.uk> From: Richard Tobin Subject: Re: Modem/PPP Problem To: "Crist Clark" , freebsd-questions@FreeBSD.ORG In-Reply-To: Crist Clark's message of Sun, 17 Jun 2001 13:16:17 -0700 Organization: just say no Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > But then as I start to type the 'atdt' more and more of the > conversation echoes back. If I keep hitting I see more and > more of what happened earlier in the conversation. I saw this once on a PCMCIA modem. I never fixed it, but it seemed like it was probably an IRQ problem - the system wasn't seeing interrupts and only getting the echoed characters when it wrote new ones. Can you try a different IRQ? -- Richard To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 15:57:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from q.closedsrc.org (ip233.gte15.rb1.bel.nwlink.com [209.20.244.233]) by hub.freebsd.org (Postfix) with ESMTP id BDC1037B406 for ; Sun, 17 Jun 2001 15:57:29 -0700 (PDT) (envelope-from lplist@closedsrc.org) Received: by q.closedsrc.org (Postfix, from userid 1003) id 8BE9C55407; Sun, 17 Jun 2001 15:44:30 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by q.closedsrc.org (Postfix) with ESMTP id 7A44851610; Sun, 17 Jun 2001 15:44:30 -0700 (PDT) Date: Sun, 17 Jun 2001 15:44:30 -0700 (PDT) From: Linh Pham To: Hugo Cc: Subject: Re: about freebsd system requirement In-Reply-To: <000a01c0f77b$4c668880$c6e82fd4@hugo> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 2001-06-18, Hugo scribbled: # What is the system requirement of free bsd i've got a P90 with 16 Mo # of Ram is it too poor to be server? That should do fine as a server running FreeBSD. Many people have turned old 386DX or 486 machines into file/web servers, gateways and firewalls. I used to host my domain on a (dual) Pentium 100 with 32MB of RAM (which was then running an older version of FreeBSD that caused SMP to not work, but then later up'd it to 3.2 and got both processors running smoothly). -- Linh Pham [lplist@closedsrc.org] // 404b - Brain not found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 16: 2:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wingerboy.sonic.net (wingerboy.sonic.net [209.204.177.11]) by hub.freebsd.org (Postfix) with ESMTP id 67A8337B403 for ; Sun, 17 Jun 2001 16:02:13 -0700 (PDT) (envelope-from kgc@wingerboy.sonic.net) Received: (from kgc@localhost) by wingerboy.sonic.net (8.11.3/8.11.3) id f5HN2CL21277 for freebsd-questions@FreeBSD.ORG; Sun, 17 Jun 2001 16:02:12 -0700 (PDT) (envelope-from kgc) Date: Sun, 17 Jun 2001 16:02:12 -0700 From: Kelsey Cummings To: freebsd-questions@FreeBSD.ORG Subject: Re: Opera (was: Linux emulation problem) Message-ID: <20010617160212.C18066@sonic.net> References: <20010617223717.38920.qmail@propane.zoomph.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010617223717.38920.qmail@propane.zoomph.net>; from dev-null@no-id.com on Sun, Jun 17, 2001 at 10:37:17PM -0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Jun 17, 2001 at 10:37:17PM -0000, dev-null@no-id.com wrote: > Ok, this isn't a question per se. I did as the two kind replies suggested and installed the linux libs from ports. Now opera is working. But it's not just working. It's working GREAT! ;-) Unlike that memory scrooge bug farm Nutscrape, Opera isn't crashing/freezing itself, nor is it bringing X down. I'm so impressed with it that I thought it was my responsibility to lighten the path for other readers of this list who may be experiencing Netscape troubles of their own.... I love it too, but opera does have some quirks that I hven't figured out yet. It doesn't work right with some web apps that we use internally that have always worked with NS and IE. Of course, it *IS* adware until registered. -- Kelsey Cummings - kgc@sonic.net sonic.net System Administrator 300 B Street, Ste 101 707.522.1000 (Voice) Santa Rosa, CA 95404 707.547.2199 (Fax) http://www.sonic.net/ Fingerprint = 7F 59 43 1B 44 8A 0D 57 91 08 73 73 7A 48 90 C5 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 16:22:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from x1-6-00-50-ba-de-36-33.kico1.on.home.com (d141-119-162.home.cgocable.net [24.141.119.162]) by hub.freebsd.org (Postfix) with ESMTP id 9827D37B401 for ; Sun, 17 Jun 2001 16:22:51 -0700 (PDT) (envelope-from genisis@istar.ca) Received: from localhost (genisis@localhost) by x1-6-00-50-ba-de-36-33.kico1.on.home.com (8.11.3/8.11.3) with ESMTP id f5HNRcx49738; Sun, 17 Jun 2001 19:27:39 -0400 (EDT) (envelope-from genisis@istar.ca) X-Authentication-Warning: x1-6-00-50-ba-de-36-33.kico1.on.home.com: genisis owned process doing -bs Date: Sun, 17 Jun 2001 19:27:37 -0400 (EDT) From: Dru X-X-Sender: To: Kelsey Cummings Cc: Subject: Re: Opera (was: Linux emulation problem) In-Reply-To: <20010617160212.C18066@sonic.net> Message-ID: <20010617192640.G49646-100000@x1-6-00-50-ba-de-36-33.kico1.on.home.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG And I found it to be blazingly fast until it freezes my keyboard. Makes it darn hard to type in those URLs :( Dru On Sun, 17 Jun 2001, Kelsey Cummings wrote: > On Sun, Jun 17, 2001 at 10:37:17PM -0000, dev-null@no-id.com wrote: > > Ok, this isn't a question per se. I did as the two kind replies suggested and installed the linux libs from ports. Now opera is working. But it's not just working. It's working GREAT! ;-) Unlike that memory scrooge bug farm Nutscrape, Opera isn't crashing/freezing itself, nor is it bringing X down. I'm so impressed with it that I thought it was my responsibility to lighten the path for other readers of this list who may be experiencing Netscape troubles of their own.... > > I love it too, but opera does have some quirks that I hven't figured out > yet. It doesn't work right with some web apps that we use internally that > have always worked with NS and IE. Of course, it *IS* adware until registered. > > > -- > Kelsey Cummings - kgc@sonic.net sonic.net > System Administrator 300 B Street, Ste 101 > 707.522.1000 (Voice) Santa Rosa, CA 95404 > 707.547.2199 (Fax) http://www.sonic.net/ > Fingerprint = 7F 59 43 1B 44 8A 0D 57 91 08 73 73 7A 48 90 C5 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 17:16:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web9703.mail.yahoo.com (web9703.mail.yahoo.com [216.136.129.139]) by hub.freebsd.org (Postfix) with SMTP id E95FE37B401 for ; Sun, 17 Jun 2001 17:16:35 -0700 (PDT) (envelope-from kjerstes@yahoo.com) Message-ID: <20010618001635.42685.qmail@web9703.mail.yahoo.com> Received: from [208.218.128.6] by web9703.mail.yahoo.com; Sun, 17 Jun 2001 17:16:35 PDT Date: Sun, 17 Jun 2001 17:16:35 -0700 (PDT) From: kjerste soderberg Subject: Solaris or Nexland? WAS: RE: aggregating bandwidth fr 3 incoming DSL lines To: freebsd-questions@freebsd.org Cc: suppt@ethone.com In-Reply-To: <001d01c0f711$da5b5fe0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thank you to the respondents thus far Pls advise further on this; here's what I have so far I've been digging more into this; Nexland makes a $300+ broadband router product that can aggregate between 2 DSL lines up to 8Mbps this is inexpensive but it's only for 2 lines .. & only up to 8Mbps combined I've found that Solaris 2.6+ can supposedly have multiple default routes in /etc/defaultrouter and can round robin between these. Some claim to have used it to do what I seek. I'd rather stick w/ FBSD here's my question; has anyone looked at the Solaris code for this functionality "coupled" w/ natd ? > >-----Original Message----- > >From: owner-freebsd-questions@FreeBSD.ORG > >[mailto:owner-freebsd-questions@FreeBSD.ORG]On > Behalf Of kjerste > >soderberg > >Sent: Friday, June 15, 2001 2:21 PM > >To: questions@FreeBSD.ORG > >Subject: aggregating bandwidth fr 3 incoming DSL > lines > > > > > >Hi all, > > > >Fat Pipe Networks has these expensive "black boxes" > >that will accept the input of any 4-8 incoming > >ethernet interfaces (say DSL lines, cable modems, > T-1) > >and then aggregate that bandwidth over all > interfaces > > > >Great for load balancing, fail-over, large FTP > >TRANSFERS ... > > > >DON'T KNOW HOW THEY DO IT, whether they NAT > whatever > >.. > > > >Anything I can use in FBSD 4.3 to mimic that type > of > >behavior .. say 3 ethernet NICs in 1 FBSD box that > >accept these 3 incoming DSL-to-ethernet connections > >and a 4th NIC tied to the LAN (w/ NATd running ..) __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 17:33: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id A64DA37B401 for ; Sun, 17 Jun 2001 17:32:57 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com for ; Sun, 17 Jun 2001 17:32:37 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: questions@FreeBSD.ORG Date: Sun, 17 Jun 2001 17:32:55 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: aggregating bandwidth fr 3 incoming DSL lines Reply-To: pjklist@ekahuna.com Message-ID: <3B2CE9C7.15244.59500A@localhost> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Sun, 17 Jun 2001 02:42:41 -0700 > From: "Ted Mittelstaedt" > > In looking at this, the idea of the devices that Fat Pipe is > selling is that you buy TWO devices, one for each "site" that > you want to interconnect. Presumably you then have > multiple DSL lines from different ISP's coming to each site. From what I can see, each device (Stream, SuperStream, Xtreme, Warp) has multiple interfaces on it, so you use one box for up to 3 external net connections. > This is NOT a solution used with a single ISP to increase > incoming Internet bandwidth from that ISP. > > In theory, it should be possible to duplicate this with > ppp under FreeBSD, you create a config that runs multilink PPP > over TCP. PPP-over-TCP is already supported in user-mode ppp > as is multilink PPP. You may have to make some modifications > to the ppp program itself, but most of the work has been done. > > My only caution though is that if one circuit path between each > site has a tremendously higher amount of Round Trip Times on > traffic between the sites, then your link is going to favor the > circuit path with the hightest speed with most of the traffic, so > you may not notice any speed increase. It appears that FatPipe may be using Linux, so I would say there's a good chance that they're doing pretty much exactly the kind of thing you suggest, except with Linux at the core of their boxes and maybe some kind of local customizations. They claim they have a patent-pending, who knows what that applies to. I have to say that this is the first "appliance" product I have seen to do this sort of thing. There are other companies that have low-end aggregation boxes but most of them are either some kind of web proxy or something that assigns individual layer 7 sessions (ie an FTP session) to a particular port in a round-robin fashion, not actually multiplexing IP at the network layer. I've been looking for a low-cost way to accomplish that, I may play around with the multilink PPP thing on FreeBSD. Seems the main drawback is having to use NAT and assign private addresses to the internal network, which means you have to jump through hoops to allow access to hosts (ie servers) from the outside world. (Plus the various other issues with certain protocols interoperating with NAT) Phil -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 18:11:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ecr.net (vopmail.ecr.net [209.115.44.5]) by hub.freebsd.org (Postfix) with ESMTP id E639E37B405 for ; Sun, 17 Jun 2001 18:11:40 -0700 (PDT) (envelope-from claybuster@ecr.net) Received: from ecr.net (unverified [209.115.44.204]) by mail.ecr.net (Vircom SMTPRS 4.3.183) with ESMTP id for ; Sun, 17 Jun 2001 21:14:14 -0400 Message-ID: <3B2D54ED.9FDF618C@ecr.net> Date: Sun, 17 Jun 2001 21:10:06 -0400 From: David Lehr X-Mailer: Mozilla 4.76 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Install info Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does freeBSD support an Elite Ultra CD-ROM/R drive (24x) Smart mdl built 10/97, and installed in an IBM 80486/66 with an INtel chipset? Sound card is probably Soundblaster, but not yet determined. The original installation discs have been lost. Please advise, and where do I get help. Any suggestions would be most welcome. Thank You Dave Lehr dlehr31@hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 18:30:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dragon.realtime.net (dragon.realtime.net [205.238.128.89]) by hub.freebsd.org (Postfix) with SMTP id E29CF37B408 for ; Sun, 17 Jun 2001 18:30:14 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from don.bga.com ([204.181.162.73]) by dragon.realtime.net ; Sun, 17 Jun 2001 20:30:13 -0600 Message-Id: <5.0.2.1.2.20010617202902.034827a0@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Sun, 17 Jun 2001 20:30:23 -0500 To: freeBSD-questions@FreeBSD.ORG From: outlawtx@bga.com Subject: Re: printing to a real postscript printer In-Reply-To: <3B2D32D4.B0CF0885@iowna.com> References: <5.0.2.1.2.20010617154040.037c2920@bga.com> <5.0.2.1.2.20010617160128.037ddec0@bga.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I would be glad to RTFM if I could FTFM. Where are the docs? Thanks, Don At 05:44 PM 6/17/01, you wrote: >magicfilger & apsfilter can help as well. Read the docs. > >-Bill > >outlawtx@bga.com wrote: > > > > Hi, > > > > My next question is this: If I have a real postscript printer > > connected directly to my local area network, how do I print to it? My > > printer is an HP Laserjet IIISi (real postscript, no emulation). > > > > Thanks, > > > > Don James > > Austin, Texas > > > > At 03:48 PM 6/17/01, you wrote: > > >On Sun, 17 Jun 2001 outlawtx@bga.com wrote: > > > > > > > Are magicfilter and appsfilter for non-postscript printers? > > > > > >Yes. > > > > > >-- > > >+-------------------+---------------------+ > > >| George Reid | FreeBSD Committer | > > >| +44 7740 197460 | greid@FreeBSD.org | > > >+-------------------+---------------------+ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > >-- >If a bird in the hand is worth two in the bush, >then what can I get for two hands in the bush? > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 18:47:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.halplant.com (24-168-203-47.wo.cox.rr.com [24.168.203.47]) by hub.freebsd.org (Postfix) with ESMTP id C392137B403 for ; Sun, 17 Jun 2001 18:46:58 -0700 (PDT) (envelope-from A.J.Caines@halplant.com) Received: by mail.halplant.com (Postfix, from userid 1001) id D32D92176; Sun, 17 Jun 2001 21:46:47 -0400 (EDT) Date: Sun, 17 Jun 2001 21:46:47 -0400 From: Andrew J Caines To: freebsd-questions@freebsd.org Subject: Re: FREE BSD QUESTIONS Message-ID: <20010617214647.A59943@hal9000.servehttp.com> Reply-To: Andrew J Caines Mail-Followup-To: freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Muchacho86@aol.com on Sun, Jun 17, 2001 at 05:07:23PM -0400 Organization: H.A.L. Plant X-Powered-by: FreeBSD 4.3-STABLE X-PGP-Fingerprint: C59A 2F74 1139 9432 B457 0B61 DDF2 AA61 67C3 18A1 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Muchacho86@aol.com, It must be a sign of old age when even recalling the bad old days brings on a feeling of nostalgia. > DOES FREE BSD HAVE A GRAPHICAL INTERFACE LIKE WINDOWS, OR IS IT LIKE DOS? FreeBSD comes with many choices of graphical interface. FreeBSD ships with XFreee86 for managing your display. You can also choose other X servers if you prefer. There are a number of desktop managers from which you can choose for FreeBSD, including the two most popular - Gnome and KDE. There is a choice of an enormous number of window managers for FreeBSD as well. FreeBSD comes with a number of shells from which you can choose and there are a choice several more which you can add. These enable you to interact with the system using commands at a text based console. As you might have gathered, the biggest difference between FreeBSD and Windows is that you have choices. Naturally this means that there is a bit of additional complexity, but when you install FreeBSD you will be given a few common options to get you started. From there you can try other things and find what suits you best. Note that XFreee86, desktops such as Gnome and KDE and the various window managers are not part of FreeBSD, but are independents free software projects which work with FreeBSD. -Andrew- -- _______________________________________________________________________ | -Andrew J. Caines- Unix Systems Engineer A.J.Caines@altavista.net | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 19: 0:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns.tsl.ru (ns.tsl.ru [195.161.154.76]) by hub.freebsd.org (Postfix) with ESMTP id 1B26C37B401 for ; Sun, 17 Jun 2001 19:00:25 -0700 (PDT) (envelope-from kulemzinn@mail.ru) Received: from hold.crystall.local (dial-up-14.tsl.ru [195.161.155.78]) by ns.tsl.ru (8.9.3/8.9.3) with ESMTP id MAA32139; Mon, 18 Jun 2001 12:00:18 +1000 Received: from c1120201.CRYSTALL.local (c1120201.crystall.local [192.168.1.253]) by hold.crystall.local (8.11.4/8.11.4) with ESMTP id f5I21rR03569; Mon, 18 Jun 2001 12:01:54 +1000 (YAKST) (envelope-from kulemzinn@mail.ru) Date: Mon, 18 Jun 2001 12:01:14 +1000 From: Igor Kulemzin X-Mailer: The Bat! (v1.45) Personal Reply-To: Igor Kulemzin Organization: Amur Crystall X-Priority: 3 (Normal) Message-ID: <1611292047.20010618120114@mail.ru> To: Arjan Knepper Cc: freebsd-questions@freebsd.org Subject: Re[2]: Pervasive SQL.2000 In-reply-To: <3B272E39.7285FFA@jak.nl> References: <146330288980.20010613120647@mail.ru> <3B272E39.7285FFA@jak.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=Windows-1251 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Arjan, Wednesday, June 13, 2001, 7:11:21 PM, you wrote: AK> Make sure you have the lines: AK> OPTIONS SYSVSHM AK> OPTIONS SYSVSEM AK> OPTIONS SYSVMSG This lines exists in my kernel config file. AK> In your kernel config. AK> Also take a look at the LINT file for other SYSVXXX related options AK> regarding the maximums to allocate. I was upgrade my FreeBSD-4.0-RELEASE to FreeBSD-4.3-STABLE and all works fine without any changes for SYSVXXX options. --=20 Thursday, June 14, 2001 8:40:16 AM Best regards, Igor Kulemzin, CSA Amur Crystall E-mail: kulemzinn@mail.ru -> =CD=F3 =E4=EE=EF=F3=F1=F2=E8=EC =F2=FB =EF=F0=EE=E1=E8=EB =E3=EE=EB=EE=E2= =EE=E9 =F1=F2=E5=ED=F3. =C8 =F7=F2=EE =F2=FB =E1=F3=E4=E5=F8=FC =E4=E5=EB= =E0=F2=FC =E2 =F1=EE=F1=E5=E4=ED=E5=E9 =EA=E0=EC=E5=F0=E5=3F -> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 19:13:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobile.hub.org (SHW39-29.accesscable.net [24.138.39.29]) by hub.freebsd.org (Postfix) with ESMTP id 1BE7537B403 for ; Sun, 17 Jun 2001 19:13:52 -0700 (PDT) (envelope-from scrappy@hub.org) Received: from localhost (scrappy@localhost) by mobile.hub.org (8.11.3/8.11.1) with ESMTP id f5I2DeW58237 for ; Sun, 17 Jun 2001 23:13:40 -0300 (ADT) (envelope-from scrappy@hub.org) X-Authentication-Warning: mobile.hub.org: scrappy owned process doing -bs Date: Sun, 17 Jun 2001 23:13:40 -0300 (ADT) From: The Hermit Hacker To: Subject: ASP for FreeBSD ... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Looking around the 'Net, I'm finding ChiliASP for Linux ... anyone know of anything that I can use for FreeBSD? Marc G. Fournier ICQ#7615664 IRC Nick: Scrappy Systems Administrator @ hub.org primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 19:32:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from q.closedsrc.org (ip233.gte15.rb1.bel.nwlink.com [209.20.244.233]) by hub.freebsd.org (Postfix) with ESMTP id A534237B405 for ; Sun, 17 Jun 2001 19:32:35 -0700 (PDT) (envelope-from lplist@closedsrc.org) Received: by q.closedsrc.org (Postfix, from userid 1003) id 28C2B55407; Sun, 17 Jun 2001 19:19:35 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by q.closedsrc.org (Postfix) with ESMTP id 1739B51610; Sun, 17 Jun 2001 19:19:35 -0700 (PDT) Date: Sun, 17 Jun 2001 19:19:35 -0700 (PDT) From: Linh Pham To: The Hermit Hacker Cc: Subject: Re: ASP for FreeBSD ... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 2001-06-17, The Hermit Hacker scribbled: # Looking around the 'Net, I'm finding ChiliASP for Linux ... anyone know of # anything that I can use for FreeBSD? You may want to check out Apache::ASP here: http://www.nodeworks.com/asp/ I'm not sure if it's exactly what you are looking for or not... -- Linh Pham [lplist@closedsrc.org] // 404b - Brain not found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 20:10:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id F423E37B403 for ; Sun, 17 Jun 2001 20:10:18 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id AD0196ACC2; Mon, 18 Jun 2001 12:40:16 +0930 (CST) Date: Mon, 18 Jun 2001 12:40:16 +0930 From: Greg Lehey To: Joe Clarke Cc: mehyar , freebsd-questions@FreeBSD.ORG Subject: Re: Book/WEB Site for Writing Device Drivers Message-ID: <20010618124016.I93506@wantadilla.lemis.com> References: <20010615231622.80649.qmail@web10008.mail.yahoo.com> <20010615192110.L14846-100000@shumai.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010615192110.L14846-100000@shumai.marcuscom.com>; from marcus@marcuscom.com on Fri, Jun 15, 2001 at 07:22:04PM -0400 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 15 June 2001 at 19:22:04 -0400, Joe Clarke wrote: > On Fri, 15 Jun 2001, mehyar wrote: >> I am seeking a book or WEB site for writing >> FreeBSD device drivers. >> >> Any help and info is appreciated. > > Checkout http://www.freebsd.org/tutorials/index.html. There are some > tutorials there for ISA drivers and Newbus drivers. Check the dates on the tutorials. Some are very old and not very helpful. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 20:30:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.thpoon.com (cr103675-a.bloor1.on.wave.home.com [24.42.106.79]) by hub.freebsd.org (Postfix) with SMTP id 74F8C37B405 for ; Sun, 17 Jun 2001 20:30:01 -0700 (PDT) (envelope-from a.genkin@utoronto.ca) Received: (qmail 27715 invoked from network); 18 Jun 2001 03:30:00 -0000 Received: from unknown (HELO tea.thpoon.com) (qmailr@192.168.1.2) by cr103675-a.bloor1.on.wave.home.com with SMTP; 18 Jun 2001 03:30:00 -0000 Received: (qmail 25015 invoked by uid 1000); 18 Jun 2001 03:29:59 -0000 To: freebsd-questions@FreeBSD.ORG Subject: Can't get imap-uw with SSL support working From: Arcady Genkin X-Face: 0=A/O5-+sE[Tf%X>rYr?Y5LD4,:^'jaJ!4jC&UR*ZrrK2>^`g22Qeb]!:d;}2YJ|Hq"LHdF OX`jWX|AT-WVFQ(TPhFVak)0nt$aEdlOq=1~D,:\z5QlVOrZ2(H,mKg=Xr|'VlHA="r Mail-Copies-To: never Date: 17 Jun 2001 23:29:59 -0400 Message-ID: <87ithulb2g.fsf@tea.thpoon.com> Lines: 34 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.4 (Academic Rigor) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I currently have impa-uw running over stunnel. I wanted to compile SSL support directly into the server, so I did the following: 1. Recompiled and reinstalled cclient port defining WITH_SSL 2. Recompiled and reinstalled imap-uw port likewise, and compiled a certificate with "make cert". 3. Stopped stunnels for pop3s and imaps services. 4. Edited /etc/inetd.conf to have: pop3 stream tcp nowait root /usr/local/libexec/ipop3d ipop3d pop3s stream tcp nowait root /usr/local/libexec/ipop3d ipop3d imap4 stream tcp nowait root /usr/local/libexec/imapd imapd imaps stream tcp nowait root /usr/local/libexec/imapd imapd 5. kill -1 `pidof inetd` The certs are in /usr/local/cert: -rwx------ 1 root wheel 1786 Jun 17 22:02 imapd.pem* lrwxr-xr-x 1 root wheel 26 Jun 17 22:02 ipop3d.pem@ -> \ /usr/local/certs/imapd.pem But I can't connect either with pop3s or imaps. I had to rever back to stunnel'ing. Any ideas what may be missing in my setup? I'm seeing the following in /var/log/messages: Jun 17 22:10:40 soup inetd[27348]: refused connection from \ eddie.cdf.toronto.edu, service imapd (tcp) Does anyone have imap-uw running with SSL support under FreeBSD? Thanks, -- Arcady Genkin i=1; while 1, hilb(i); i=i+1; end To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 20:41:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.mail.pas.earthlink.net (scaup.mail.pas.earthlink.net [207.217.121.49]) by hub.freebsd.org (Postfix) with ESMTP id 8806F37B405 for ; Sun, 17 Jun 2001 20:41:26 -0700 (PDT) (envelope-from sidhe24@earthlink.net) Received: from earthlink.net (1Cust183.tnt4.tacoma.wa.da.uu.net [63.10.227.183]) by scaup.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id UAA04246 for ; Sun, 17 Jun 2001 20:41:22 -0700 (PDT) Message-ID: <3B2D79E7.59B11CDC@earthlink.net> Date: Sun, 17 Jun 2001 20:47:51 -0700 From: geoffrey shepler X-Mailer: Mozilla 4.72C-CCK-MCD Caldera Systems OpenLinux [en] (X11; U; Linux 2.2.14 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: freeBSD and athlon/duron Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Are there any known problems running freeBSD on an AMD system? Thank you, Bye To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 22: 3:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wiproecmx1.wipro.com (wiproecmx1.wipro.com [164.164.31.5]) by hub.freebsd.org (Postfix) with ESMTP id BBA0037B401 for ; Sun, 17 Jun 2001 22:03:08 -0700 (PDT) (envelope-from ravindran.chandra@wipro.com) Received: from ecvwall11.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx1.wipro.com (8.11.3/8.11.3) with SMTP id f5IFMdj27071 for ; Mon, 18 Jun 2001 10:22:39 -0500 (GMT) Received: from ecvwall11.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GF40ML00.2CE for ; Mon, 18 Jun 2001 10:31:33 +0530 Received: from wipro.com ([192.168.205.203]) by platinum.mail.wipro.com (Netscape Messaging Server 4.15) with ESMTP id GF40NO00.B22 for ; Mon, 18 Jun 2001 10:32:12 +0530 Message-ID: <3B2D8D0E.28FF99D4@wipro.com> Date: Mon, 18 Jun 2001 10:39:39 +0530 From: "Ravi.C" Organization: Wipro Technologies - Global R&D X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Regarding pthread_mutex_init Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, We are calling pthread_mutex_init() function while writing gigabit ethernet device driver in FreeBSD 4.3. We are facing the following problem : Problem 1 : While doing make, In file /usr/src/include/pthread.h sched.h is not found. I figured out this file(sched.h) present in /usr/include/posix4 dir and copied the directory posix4 under /usr/src/include/posix4 and changed sched.h to posix4/sched.h. Then the make error went off. Problem 2: After doing the above dirty fix, when we try to load the driver using kldload, I am getting the following error : link_elf : symbol pthread_mutex_init undefined. Can anyone please tell me what is the problem? Thanks and Regards, Ravi.C To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 22: 4:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f72.law11.hotmail.com [64.4.17.72]) by hub.freebsd.org (Postfix) with ESMTP id 5E4C237B403 for ; Sun, 17 Jun 2001 22:04:53 -0700 (PDT) (envelope-from anandfranklin@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 17 Jun 2001 22:04:53 -0700 Received: from 203.200.20.3 by lw11fd.law11.hotmail.msn.com with HTTP; Mon, 18 Jun 2001 05:04:52 GMT X-Originating-IP: [203.200.20.3] From: "Anand Franklin J" To: freebsd-questions@FreeBSD.ORG Subject: Hi!!! Date: Mon, 18 Jun 2001 05:04:52 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 18 Jun 2001 05:04:53.0154 (UTC) FILETIME=[35958820:01C0F7B4] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi!! I have a problem in the serial communication using the tip command. I have given proper entry in /etc/ttys, /etc/gettytab and /etc/remote. still, when i give the command "tip cuaa0c" it just says "connected" and hangs. the login prompt doesnot occurs. I varified the log file, it says completed and terminated. Is there any more setting to be done, if so please do mail me. with regard's franklin. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 22:12: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kurango.cit.gu.edu.au (kurango.cit.gu.edu.au [132.234.86.1]) by hub.freebsd.org (Postfix) with ESMTP id C569437B401 for ; Sun, 17 Jun 2001 22:11:52 -0700 (PDT) (envelope-from steve@cit.gu.edu.au) Received: from localhost (steve@localhost) by kurango.cit.gu.edu.au (8.11.0/8.11.0) with SMTP id f5I5Bnb00732 for ; Mon, 18 Jun 2001 15:11:49 +1000 (EST) Date: Mon, 18 Jun 2001 15:11:49 +1000 (EST) From: Steven Goodwin To: questions@FreeBSD.ORG Subject: Riva128 acc. under X4 && CD driver probs In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does anyone have OpenGL acceleration for a riva128 video card under 4.x? If so, which version and driver are you using? (I was able to get it working under XFree86 3.3.5) Likewise, FreeBSD is still not recognising my CD burner. It is a Smart and Friendly CD Racer (based on the JVC XR-W2080) and gives me the following messages at boot. Thanks, Steve Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Wed May 30 08:24:20 GMT 2001 ... atapci0: port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ... ad0: 14594MB [29651/16/63] at ata0-master UDMA66 ata1-master: timeout waiting for command=ef s=00 e=00 ata1-master: CDROM device - NO DRIVER! afd0: 96MB [96/64/32] at ata1-slave using PIO0 Mounting root from ufs:/dev/ad0s1a ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 22:12:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wiproecmx1.wipro.com (wiproecmx1.wipro.com [164.164.31.5]) by hub.freebsd.org (Postfix) with ESMTP id 0EF4C37B403 for ; Sun, 17 Jun 2001 22:11:56 -0700 (PDT) (envelope-from sumanth.vidyadhara@wipro.com) Received: from ecvwall11.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx1.wipro.com (8.11.3/8.11.3) with SMTP id f5IFVQj00588 for ; Mon, 18 Jun 2001 10:31:27 -0500 (GMT) Received: from ecvwall11.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GF411800.FDT for ; Mon, 18 Jun 2001 10:40:20 +0530 Received: from sumanth ([192.168.205.201]) by platinum.mail.wipro.com (Netscape Messaging Server 4.15) with ESMTP id GF412500.B2C for ; Mon, 18 Jun 2001 10:40:53 +0530 Message-ID: <00cc01c0f7b6$57666210$c9cda8c0@sumanth> From: "sumanth vidyadhara" To: Subject: Regarding receive of packets Date: Mon, 18 Jun 2001 10:50:08 +0530 Organization: Wipro Global R&D MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------InterScan_NT_MIME_Boundary Content-Type: multipart/alternative; boundary="----=_NextPart_000_00C9_01C0F7E4.70E601E0" ------=_NextPart_000_00C9_01C0F7E4.70E601E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi,=20 we are developing a ethernet driver, we seem to have some doubts = regarding the reception of packets. In fxp driver there is a new receive buffer allocated for every = reception of a packet. =20 1>Every time we receive a packet in our allocated buffer we send it up = using the ether_input but the buffer which we sent up cannot be reused = by us since this is given to the upper layer so we end up allocating a = buffer and then plug it at the end of free receive buffer pool. 2>Is there any way we can dup the message and send it up. since in sco openserver and unixware this the way we are doing it. Since it would stress the system in every time we allocate the receive = buffer. Do you have any pointers to this. Any help is greatly appreciated. Thanks Sumanth ------=_NextPart_000_00C9_01C0F7E4.70E601E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi,
 we are developing a=20 ethernet driver, we seem to have some doubts = regarding the=20 reception of packets.
In fxp driver there is a new = receive buffer=20 allocated for every reception of a packet. 
1>Every time we receive a packet in = our=20 allocated buffer we send it up using the ether_input but the buffer = which we=20 sent up cannot be reused by us since this is given to the upper layer so = we end=20 up allocating a buffer and then plug it at the end of free receive = buffer=20 pool.
 
2>Is there any way we can dup the = message and=20 send it up.
since in sco openserver and unixware = this the way=20 we are doing it.
Since it would stress the system in = every time we=20 allocate the receive buffer.
Do you have any pointers to = this.
Any help is greatly = appreciated.
Thanks
 
Sumanth
 
------=_NextPart_000_00C9_01C0F7E4.70E601E0-- --------------InterScan_NT_MIME_Boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 22:33:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wiproecmx1.wipro.com (wiproecmx1.wipro.com [164.164.31.5]) by hub.freebsd.org (Postfix) with ESMTP id 6A47C37B405 for ; Sun, 17 Jun 2001 22:33:06 -0700 (PDT) (envelope-from ravindran.chandra@wipro.com) Received: from ecvwall11.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx1.wipro.com (8.11.3/8.11.3) with SMTP id f5IFqaj08713 for ; Mon, 18 Jun 2001 10:52:37 -0500 (GMT) Received: from ecvwall11.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GF420J00.EF5 for ; Mon, 18 Jun 2001 11:01:31 +0530 Received: from wipro.com ([192.168.205.203]) by platinum.mail.wipro.com (Netscape Messaging Server 4.15) with ESMTP id GF421L00.B2G for ; Mon, 18 Jun 2001 11:02:09 +0530 Message-ID: <3B2D9418.228956B3@wipro.com> Date: Mon, 18 Jun 2001 11:09:37 +0530 From: "Ravi.C" Organization: Wipro Technologies - Global R&D X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: (no subject) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe freebsd-questions To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Jun 17 23:28: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from void.xpert.com (xpert.com [199.203.132.1]) by hub.freebsd.org (Postfix) with ESMTP id 3FB4F37B403 for ; Sun, 17 Jun 2001 23:28:05 -0700 (PDT) (envelope-from daniel@xpert.com) Received: from mailserv.xpert.com ([199.203.132.135]) by void.xpert.com with esmtp (Exim 3.20 #1) id 15BrYo-0000FP-00 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 08:26:50 +0300 Received: by mailserv.xpert.com with Internet Mail Service (5.5.2650.21) id ; Mon, 18 Jun 2001 09:27:52 +0300 Message-ID: From: Daniel Levy To: "'freebsd-questions@freebsd.org'" Subject: Date: Mon, 18 Jun 2001 09:27:50 +0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="WINDOWS-1255" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 0: 1:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from groucho.hvm.sas.cica.es (ahvm.hvm.sas.cica.es [150.214.10.82]) by hub.freebsd.org (Postfix) with ESMTP id 0635737B401 for ; Mon, 18 Jun 2001 00:00:56 -0700 (PDT) (envelope-from jmora@hvm.sas.cica.es) Received: from localhost (jmora@localhost) by groucho.hvm.sas.cica.es (8.11.1/8.11.1) with ESMTP id f5I71af06650; Mon, 18 Jun 2001 09:01:43 +0200 (CEST) (envelope-from jmora@hvm.sas.cica.es) X-Authentication-Warning: groucho.hvm.sas.cica.es: jmora owned process doing -bs Date: Mon, 18 Jun 2001 09:01:34 +0200 (CEST) From: "Jesus A. Mora" Reply-To: jmora@ahvm.hvm.sas.cica.es To: "Ian P. Thomas" Cc: jmora@ahvm.hvm.sas.cica.es, freebsd-questions@FreeBSD.ORG Subject: Re: Problems with my hard disk geometry? In-Reply-To: <200106161557.LAA00609@scraemondaemon.my.domain> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 16 Jun 2001, Ian P. Thomas wrote: > FreeBSD doesn't use the BIOS for drive geometry, it gets it from the > disk. Windows does use the BIOS. If you have the root partition of > FreeBSD installed before the 1024 cylinder, or roughly 8 GB in your case, > then it should work fine. You also need to make sure to install booteasy > on the disk. It will allow you to choose from Windows or FreeBSD at > startup. > > Ian > In fact, it DID work -apparently- fine until I reinstalled Windows. Before the reinstallation I booted FreeBSD up several times, customized the kernel, installed a port for XFree86 4.1.0... and Windows began to behave strangely (I mean, more than usual). Maybe it's only a coincidence. Now, once reinstalled Windows, it works as expected... but FreeBSD refuses to boot, even though booteasy was reinstalled in the MBR. Well, it seems to me a problem related to the geometry of the HD and to those stupid limitations in the design of so many subsystems of the IBM PC-derived computers. So, I think I have two options: 1) repartition the HD, in order to relocate the FreeBSD slice on the first 1024 cylinders. That's a nuisance since I should have to have two slices -and two logical drives and two directory hierarchies- for Win98. 2) install a second HD dedicated exclusively to FreeBSD. That's the way I have decided to go, since it guarantees me that no unexpected and obscure interactions between both OSes will occur. So many thanks for the help, and see you again. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 0: 1:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cwb.pacific.net.hk (cwb.pacific.net.hk [202.14.67.92]) by hub.freebsd.org (Postfix) with ESMTP id 113B037B403 for ; Mon, 18 Jun 2001 00:01:07 -0700 (PDT) (envelope-from alexkwan@pacific.net.hk) Received: from kwaifong.pacific.net.hk (kwaifong.pacific.net.hk [202.14.67.7]) by cwb.pacific.net.hk with ESMTP id PAA07059; Mon, 18 Jun 2001 15:01:02 +0800 (HKT) Received: from alexkwan (ppp48.dyn20.pacific.net.hk [202.64.20.48]) by kwaifong.pacific.net.hk with SMTP id PAA22725; Mon, 18 Jun 2001 15:00:56 +0800 (HKT) Message-ID: <001f01c0f7c7$7021f4c0$301440ca@alexkwan> From: "Alex Kwan" To: "FBSD-Q" , "Christian Magee" Subject: How to create a script to shutdown the ppp connection Date: Mon, 18 Jun 2001 15:22:26 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! (1) How to create a script forced to shutdown the ppp connection before the timeout? (I am using the user mode ppp). (2) Which package can monitor the ppp connection (transfer rate ..etc)? Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 0:16:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.riic.uni-linz.ac.at (mail.riic.uni-linz.ac.at [140.78.161.130]) by hub.freebsd.org (Postfix) with ESMTP id C203837B401 for ; Mon, 18 Jun 2001 00:16:11 -0700 (PDT) (envelope-from hueber@riic.at) Received: from hawkings.riic.uni-linz.ac.at (hawkings.riic.uni-linz.ac.at [140.78.161.239]) by mail.riic.uni-linz.ac.at (8.9.3/8.9.3) with ESMTP id JAA25290; Mon, 18 Jun 2001 09:10:12 +0200 Message-Id: <5.1.0.14.0.20010618090822.030d66b0@postoffice.riic.at> X-Sender: hueber@postoffice.riic.at X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 18 Jun 2001 09:10:35 +0200 To: "Alex Kwan" , "FBSD-Q" , "Christian Magee" From: Gernot Hueber Subject: Re: How to create a script to shutdown the ppp connection In-Reply-To: <001f01c0f7c7$7021f4c0$301440ca@alexkwan> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 15:22 18.06.01 +0800, Alex Kwan wrote: >Hi! > >(1) How to create a script forced to shutdown the ppp=20 > connection before the timeout? (I am using the > user mode ppp). man 8 pppctl will give you examples >(2) Which package can monitor the ppp connection > (transfer rate ..etc)? > >Thanks run pppctl or if using ppp interactively use the show command, have a look at man 8 ppp command for options! HTH Gernot >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message Dipl.-Ing. Gernot Hueber Institut f=FCr Integrierte Schaltungen Freist=E4dter Strasse 315/2 A-4040 Linz Tel: +43 732 2468-7118, Fax: -7126 E-mail: hueber@riic.at To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 0:17: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from Exchange2000.com-con.ag (exchange2000.com-con.net [212.6.164.8]) by hub.freebsd.org (Postfix) with ESMTP id ED04D37B405 for ; Mon, 18 Jun 2001 00:16:55 -0700 (PDT) (envelope-from rh@com-con.net) Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Subject: a sendmail question X-MimeOLE: Produced By Microsoft Exchange V6.0.4417.0 Date: Mon, 18 Jun 2001 09:16:48 +0100 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: a sendmail question Thread-Index: AcD3zwWSqTX69/bZTkaqNzTEDw2vbQ== From: "Heimes, Rene" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hello! i have to care for a mail-server i did not initially set up. it functions as a relay-server and also as "main" mail server for customers. currently, only local users and our domain hosts are allowed to send to non-domain email-addresses... how can i setup a sendmail system, that allows certain users to send email to anywhere, just because they authenticated with username & password? thank you in advance! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 0:29:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.mail.pas.earthlink.net (scaup.mail.pas.earthlink.net [207.217.121.49]) by hub.freebsd.org (Postfix) with ESMTP id 778C537B407 for ; Mon, 18 Jun 2001 00:29:32 -0700 (PDT) (envelope-from smaycock@earthlink.net) Received: from barney.home.mrhagar.com (cpe-24-221-103-14.az.sprintbbd.net [24.221.103.14]) by scaup.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id AAA13174 for ; Mon, 18 Jun 2001 00:29:29 -0700 (PDT) From: Simon Maycock Date: Mon, 18 Jun 2001 07:28:36 GMT Message-ID: <20010618.7283600@barney.home.mrhagar.com> Subject: natd and Apache Port Based Virtual Hosting To: freebsd-questions@FreeBSD.ORG X-Mailer: Mozilla/3.0 (compatible; StarOffice/5.2;Linux) X-Priority: 3 (Normal) MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can anyone tell me how I configure Port based Virtual Hosts in Apache so= =20 that they correctly work with translated packets. It is my understandin= g=20 that all natd is doing is taking the external address, striping it and=20 adding an internal address. If this is the case then I believe the=20 following entries in my httd.conf should be working? # Use name-based virtual hosting. # #NameVirtualHost 192.168.1.201 Listen 80 Listen 8080 Listen 8081 Listen 8082 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. # ServerAdmin a@b.com DocumentRoot /data/www/abc ServerName 192.168.1.201:8080 ErrorLog /data/www/abc/logs/error_log TransferLog /data/www/abc/logs/access_log =20 ServerAdmin a@b.com DocumentRoot /data/www/xyz ServerName 192.168.1.201:8082 ErrorLog /data/www/xyz/logs/error_log TransferLog /data/www/xyz/logs/access_log This works fine from any internal host, but not from external ones, whic= h=20 just default to the default site at port 80. In an attempt to get this problem resolved I have set the firewall to=20 allow all and my rc.conf calls the my natd.conf file containing these=20 enteries. # log yes redirect_port tcp 192.168.2.201:80 80 redirect_port tcp 192.168.2.201:8080-8082 8080-8082 Any help will be gratefully received. Simon Maycock To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 2: 0: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from spyder.bytecraft.au.com (bytecr1.lnk.telstra.net [139.130.142.13]) by hub.freebsd.org (Postfix) with ESMTP id 2C34837B401 for ; Mon, 18 Jun 2001 01:59:59 -0700 (PDT) (envelope-from taylorm@bytecraft.au.com) Received: by spyder.bytecraft.au.com (Postfix, from userid 1001) id 055DABA80; Mon, 18 Jun 2001 18:59:56 +1000 (EST) To: alexkwan@pacific.net.hk, cmagee@electron-valve.com, freebsd-questions@FreeBSD.ORG, hueber@riic.at Subject: Re: How to create a script to shutdown the ppp connection In-Reply-To: <5.1.0.14.0.20010618090822.030d66b0@postoffice.riic.at> Message-Id: <20010618085956.055DABA80@spyder.bytecraft.au.com> Date: Mon, 18 Jun 2001 18:59:56 +1000 (EST) From: taylorm@bytecraft.au.com (User Taylorm) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG man netstat especially the -bdn and -w options btw I have a Tk script that draws a nice graph updating every 10 seconds or so To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3: 0:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id BAB7637B403 for ; Mon, 18 Jun 2001 03:00:40 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com for ; Mon, 18 Jun 2001 03:00:41 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: questions@FreeBSD.ORG Date: Mon, 18 Jun 2001 03:00:39 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: Better printing from the command-line Reply-To: pjklist@ekahuna.com Message-ID: <3B2D6ED7.24009.2612A64@localhost> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Sun, 17 Jun 2001 15:10:28 -0700 > From: "Ted Mittelstaedt" > > No problem, and if you need to know any of the HP codes let > me know I've got several printouts of them. They are up on > HP's website but they are kind of difficult to find. Actually my "Pocket PC Ref" has a nice list of PCL codes. I always thought it would come in handy but I hardly ever need to mess with them these days. > The chapter has an example that sends a command to an HP > that switches on and off CR/LF or LF-only mode, use this > and substitute the appropriate commands for font selection, > duplexing, landscape/portriate, etc. Gotcha, only partway through it so far, will let you know if I have any other Q's. -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3: 7:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id C2FD137B401 for ; Mon, 18 Jun 2001 03:07:34 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com for ; Mon, 18 Jun 2001 03:07:35 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: questions@FreeBSD.ORG Date: Mon, 18 Jun 2001 03:07:34 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: Better printing from the command-line Reply-To: pjklist@ekahuna.com Message-ID: <3B2D7076.26736.2677CFE@localhost> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Sun, 17 Jun 2001 15:14:42 -0700 > From: "Ted Mittelstaedt" > > Phil wrote: > >I can't really set the printer a certain way because it depends on > >the job, and because I have over half a dozen machines here that > >print to that printer from various OS's. > > > > A quick and easy way is to define multiple printcap entries that set the > printer to do what you want. > > For example, suppose that "lp" is connected to the HP. Add definitions > for "lp-raw" (unadulterated) or "lp-land" (landscape) or "lp-132" for > 132-column printing, etc. etc. When each definition is selected by > the program (usually lp -P lp-raw or some such) the associated filter > adds in the commands to switch on the special features before the job > prints and trails them with the code to switch the printer back to > normal mode. Good point. I already created one definition for text and one for raw/postscript. Actually I did that prior to setting one up for Magicfilter because it's supposed to deal with both, so actually I have 3 printer devices defined in printcap. Good idea though, that may just meet my simplicity requirements. Thx, Phil -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3:21:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id C95C237B401 for ; Mon, 18 Jun 2001 03:21:14 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com for ; Mon, 18 Jun 2001 03:21:15 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: questions@FreeBSD.ORG Date: Mon, 18 Jun 2001 03:21:14 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: printing to a real postscript printer Reply-To: pjklist@ekahuna.com Message-ID: <3B2D73AA.11795.2740094@localhost> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Sun, 17 Jun 2001 20:30:23 -0500 > From: outlawtx@bga.com > > I would be glad to RTFM if I could FTFM. Where are the docs? > > Thanks, > > Don Did you install the Magicfilter port? When I did, it created a manpage. ("man magicfilter" works) There is also an HTML file located in the magicfilter port directory (/usr/ports/print/magicfilter here) and a directory called /usr/local /share/examples/magicfilter also. I find this stuff by typing "locate magicfilter". Phil > At 05:44 PM 6/17/01, you wrote: > >magicfilger & apsfilter can help as well. Read the docs. > > > >-Bill -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3:26:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 066AC37B401 for ; Mon, 18 Jun 2001 03:26:43 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5IAQLl64707; Mon, 18 Jun 2001 03:26:22 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Toomas Aas" , Subject: RE: Export restrictions for Kerberos? Date: Mon, 18 Jun 2001 03:26:21 -0700 Message-ID: <000001c0f7e1$1e81cfe0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <200106171948.f5HJmvO30279@lv.raad.tartu.ee> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the US high encryption software and algorithims are considered munitions and you must get a wavier from the Commerce department to export them. More information on this is located here: http://www.bxa.doc.gov/Encryption/Default.htm However, what they don't tell you there is that there was a ruling on May 6, 1999, the Ninth Circuit issued a decision in Bernstein v. Department of Commerce holding that the export controls violate the First Amendment as applied to encryption "source code," and further holding that the export controls on other encryption products cannot be judicially severed from those on encryption source code. Anyway, as you might imagine the US Government appealed and the Ninth granted the appeal - since then the government has been attempting various moves to delay and delay resolution on this case. There was a new liberalized set of encryption regulations released but it primariarly fast tracks mass-market 64 bit encryption. In the Open Source community, the usual method of dealing with this stupidity is for an archive server located outside the US to act as a source for the restricted software. The stupid part of all this is that the child porno people, drug dealers and foreign spies in the US by now all routinely encrypt at 128 bit or above, so the net effect of this stupidity is that the law-abiding citizens in the US are the ones penalized. It's not like the generally used high-encryption algorithems are any big secret, they are available in archive servers across the globe. The real root of the problem is that the Defence department is playing this big delaying game with encryption to attempt to keep people using old, easily crackable encryption schemes. However, there's a fundamental conflict with the First Amendment in the US on this issue. Ultimately, it's going to end up in front of the Supreme Court which is why the Presidential election in the US and the subsequent changes in the US Senate have been so critical. It was touch and go there for a while with the conservatives poised to stuff the court, but with the reverting of the Senate back to the liberals, we will probably end up with some moderates on the court, so there's a good chance that in the next 5 years we will see the crypto regulations completely removed. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Toomas Aas >Sent: Sunday, June 17, 2001 12:49 PM >To: freebsd-questions@FreeBSD.ORG >Subject: Export restrictions for Kerberos? > > >Hello! > >I tried to install krb5 and it basically told me that it is >illegal to do so outside of the U.S., because Kerberos contains >encryption software that cannot be exported from U.S. > >I admit that U.S. legislation is not one of my fields of >expertise, however, I remember hearing some time ago that lot >of U.S. export restrictions for cryptography were removed. > >Is Kerberos still considered "too good" to be exported from >U.S.? If so, what alternatives do you recommend? > >-- >Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ >* The cost of living hasn't affected its popularity. > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3:31:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from empty1.ekahuna.com (empty1.ekahuna.com [198.144.200.196]) by hub.freebsd.org (Postfix) with ESMTP id C7E6C37B406 for ; Mon, 18 Jun 2001 03:31:22 -0700 (PDT) (envelope-from pjklist@ekahuna.com) Received: from pc-02 (pc02.ekahuna.com [198.144.200.197]) by empty1.ekahuna.com (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id com for ; Mon, 18 Jun 2001 03:31:23 -0700 From: "Philip J. Koenig" Organization: The Electric Kahuna Organization To: questions@FreeBSD.ORG Date: Mon, 18 Jun 2001 03:31:21 -0700 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: Opera (was: Linux emulation problem) Reply-To: pjklist@ekahuna.com Message-ID: <3B2D760A.28347.27D47AB@localhost> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Sun, 17 Jun 2001 16:02:12 -0700 > From: Kelsey Cummings > > On Sun, Jun 17, 2001 at 10:37:17PM -0000, dev-null@no-id.com > wrote: > > Ok, this isn't a question per se. I did as the two kind > > replies suggested and installed the linux libs from ports. Now > > opera is working. But it's not just working. It's working GREAT! ;-) > > Unlike that memory scrooge bug farm Nutscrape, Opera isn't > > crashing/freezing itself, nor is it bringing X down. I'm so > > impressed with it that I thought it was my responsibility to > > lighten the path for other readers of this list who may be > > experiencing Netscape troubles of their own.... > I love it too, but opera does have some quirks that I hven't figured out > yet. It doesn't work right with some web apps that we use internally > that have always worked with NS and IE. Of course, it *IS* adware until > registered. It's a lot better than it used to be. I use it as my main browser now. It is my unscientific opinion that the vast majority of pages or apps that won't work with Opera nowadays are ones which pander to generally non-standard idiosyncracies of IE and Netscape, rather than flaws with Opera. Well worth the $39, they deserve support for giving us a nice alternative. (At least they are out front with their revenue source. I don't consider IE or NS free, you are just paying for them by legitimizing other aspects of TimeWarner/AOL or Microsoft's efforts at dominating the net) My least favorite aspect at the moment is the bookmark feature, so for now I use Netscape for bookmarks and open the Netscape html bookmark file in Opera when I want to access it. (Bless Netscape for at least making that an html file) Phil -- Philip J. Koenig pjklist@ekahuna.com Electric Kahuna Systems -- Computers & Communications for the New Millenium To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 3:45:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from carbon.btinternet.com (carbon.btinternet.com [194.73.73.92]) by hub.freebsd.org (Postfix) with ESMTP id F35BF37B403 for ; Mon, 18 Jun 2001 03:45:17 -0700 (PDT) (envelope-from waynep@pan.realtime.co.uk) Received: from [213.122.63.156] (helo=marvin.penguinpowered.org.uk) by carbon.btinternet.com with esmtp (Exim 3.22 #9) id 15BwWx-0003Xr-00 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 11:45:16 +0100 Received: from pan.penguinpowered.org.uk ([192.168.1.60] helo=pan.realtime.co.uk) by marvin.penguinpowered.org.uk with esmtp (Exim 3.22 #1) id 15BwSm-0000P5-00 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 11:40:56 +0100 Received: from waynep by pan.realtime.co.uk with local (Exim 3.22 #1) id 15BwWX-00009p-00 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 11:44:49 +0100 From: Wayne Pascoe To: freebsd-questions@freebsd.org Subject: GDM and FreeBSD 4.3-STABLE Date: 18 Jun 2001 11:44:48 +0100 Message-ID: <86zob6jcdb.fsf@pan.penguinpowered.org.uk> Lines: 29 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I am trying to get gdm going on XFree86 4.3-STABLE. I have added a user and a group named gdm. When I start gdm and try to login I get the following messages in the console window that I launched gdm from : Jun 18 11:43:49 ford gdm[615]: no modules loaded for `gdm' service Jun 18 11:43:49 ford gdm[615]: Couldn't open session for waynep If I edit /etc/pam.conf and copy the xdm stuff, and change xdm to gdm, then restart gdm, then I just get : Jun 18 11:46:11 ford gdm[644]: Couldn't open session for waynep I am guessing that I don't have the right settings in my pam.conf. man gdm says that there is no man page for gdm installed. Am I right in guessing that this is related to PAM? Can anyone advise me on a solution ? Thanks, -- - Wayne Pascoe E-mail: wayne.pascoe@realtime.co.uk Phone : +44 (0) 20 7544 4668 Mobile: +44 (0) 788 431 1675 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 4:31:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mongkok.pacific.net.hk (mongkok.pacific.net.hk [202.64.33.131]) by hub.freebsd.org (Postfix) with ESMTP id 4413F37B401 for ; Mon, 18 Jun 2001 04:31:40 -0700 (PDT) (envelope-from alexkwan@pacific.net.hk) Received: from kwaifong.pacific.net.hk (kwaifong.pacific.net.hk [202.14.67.7]) by mongkok.pacific.net.hk with ESMTP id TAA18310 for ; Mon, 18 Jun 2001 19:31:07 +0800 (HKT) Received: from alexkwan (ppp151.dyn29.pacific.net.hk [202.64.29.151]) by kwaifong.pacific.net.hk with SMTP id TAA14251 for ; Mon, 18 Jun 2001 19:31:37 +0800 (HKT) Message-ID: <001101c0f7e8$9b2a7c20$971d40ca@alexkwan> From: "Alex Kwan" To: "freebsd-questions" Subject: /etc/defaults/rc.conf was broken, how to fix it? Date: Mon, 18 Jun 2001 19:18:57 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! After the /etc/defaults/rc.conf was broken, I can't restart the system normally, also can't repair this file (the system complain it is a read-only file), how to fix it? Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 5: 8: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by hub.freebsd.org (Postfix) with SMTP id 75E7237B401 for ; Mon, 18 Jun 2001 05:08:02 -0700 (PDT) (envelope-from r.j.s@gmx.net) Received: (qmail 20354 invoked by uid 0); 18 Jun 2001 12:08:01 -0000 Received: from kabel203069.kabel.utwente.nl (130.89.203.69) by mail.gmx.net (mp020-rz3) with SMTP; 18 Jun 2001 12:08:01 -0000 Date: Mon, 18 Jun 2001 14:08:20 +0200 (West-Europa (zomertijd)) From: Rogier Steehouder Reply-To: To: Alex Zepeda Cc: Subject: Re: [FBSD-Q] how to get IPv6 router advertisement to work? In-Reply-To: <20010617151453.A617@zippy.mybox.zip> Message-ID: X-Warning: UNAuthenticated Sender MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mail from Alex Zepeda, sent 17-06-2001: > Jun 17 15:06:57 zippy rtadvd[975]: sendmsg on fxp0: Permission > denied At first glance this looks like firewall trouble. Do you have IPv6 firewall? (What does "ip6fw s" show?) If so, take a look at the rc.firewall6 file. There are several kinds of packets that must be let through for router advertisements to work (if I remember correctly, the fe81::/16 en fe82::/16 link-local multicast address ranges). If you don't have an IPv6 firewall active, we'll have to think of something else. With kind regards, Rogier Steehouder -- ___ _ -O_\ // | / Rogier Steehouder //\ / \ mailto:r.j.s@gmx.net // \ <----------------------- 90m ----------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 5:45:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc1-bigg2-0-cust221.lut.cable.ntl.com [62.255.179.221]) by hub.freebsd.org (Postfix) with ESMTP id 5D53C37B407 for ; Mon, 18 Jun 2001 05:45:09 -0700 (PDT) (envelope-from neil@darlow.co.uk) Received: (from neil@localhost) by router.darlow.co.uk (8.11.1/8.11.1) id f5ICj6V59014 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 13:45:06 +0100 (BST) (envelope-from neil@darlow.co.uk) Date: Mon, 18 Jun 2001 13:45:05 +0100 From: Neil Darlow To: freebsd-questions@freebsd.org Subject: imap-uw and cram-md5 authentication Message-ID: <20010618134505.A58996@router.darlow.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I am having little success in using CRAM-MD5 authentication with the imap-uw-0104241750/cclient-0104241750 ports under 4.2-RELEASE. The imap server obviously detects the presence of /etc/cram-md5.pwd as mutt asks for a CRAM key. Entering the correct key produces a CRAM authentication failed error and a prompt for a password which is also rejected. Is there some additional PAM configuration that is required when using CRAM-MD5 with imapd? I've read the file md5.txt and I'm providing the CRAM key information in the required format. Operation with normal Unix passwords is ok. Any ideas and suggestions gratefully accepted. Regards, Neil Darlow. -- 1024D/531F9048 1999-09-11 Neil Darlow Key Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 5:56:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hrz-ws16.hrz.uni-kassel.de (hrz-ws16.hrz.uni-kassel.de [141.51.12.16]) by hub.freebsd.org (Postfix) with ESMTP id 685D337B403 for ; Mon, 18 Jun 2001 05:56:48 -0700 (PDT) (envelope-from careimer@hrz.uni-kassel.de) Received: from hrz-ws52.hrz.uni-kassel.de (hrz-ws52.hrz.uni-kassel.de [141.51.4.20]) by hrz-ws16.hrz.uni-kassel.de (8.11.2/8.11.2) with ESMTP id f5ICuju21232 for ; Mon, 18 Jun 2001 14:56:46 +0200 Date: Mon, 18 Jun 2001 14:56:45 +0200 (MES) From: Carsten Reimer To: Subject: kdm and growing CPU-usage Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hallo, we intend to use kdm as the graphical Login-Manager for the Computer-Facilities at the University. We have KDE 2.1 and BSD 4.3 stable. KDM works well for the first user to log in and log out again. When, after the first user has logged out, a second user logs in and out the cpu-usage of the parent process of kdm (as reported by top) starts to increase up to 100%. Giving this process a SIGHUP leads to decreasing cpu-usage (to 0%). We are running kdm as a daemon. It is started on booting time from a startup-script in /usr/local/etc/rc.d . Maybe anyone has any idea how to solve this problem. I tried several things but nothing seem to work. Any hints are welcome. Thank you in advance with best regards Carsten reimer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 5:59:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from 1upmc-msximc2.isdip.upmc.edu (1upmc-msximc2.isdip.upmc.edu [128.147.18.40]) by hub.freebsd.org (Postfix) with ESMTP id E23FC37B405 for ; Mon, 18 Jun 2001 05:58:36 -0700 (PDT) (envelope-from personrp@ccbh.com) Received: by 1upmc-msximc2.isdip.upmc.edu with Internet Mail Service (5.5.2653.19) id ; Mon, 18 Jun 2001 08:58:41 -0400 Message-ID: <46AEB8C1B628D511969200508B6FE42A6683EC@1upmc-msx6.isdip.upmc.edu> From: "Person, Roderick" To: questions@FreeBSD.ORG Subject: RE: Opera (was: Linux emulation problem) Date: Mon, 18 Jun 2001 08:55:57 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C0F7F6.047BEDA0" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C0F7F6.047BEDA0 Content-Type: text/plain; charset="iso-8859-1" Opera is great. I been using it for months now. And the only things that annoy me are the Bookmarks which do strange things on me (like repeating 10 times in the list). And the lack of plugins. I don't go to many sites which need plugin support so I can live with that for now. As Philip, suggested the pages that won't work with Opera are catering to IE or NS. I use Opera for Windows at work and the site it can display are IE and NS specific. I know this because one of are web sites is but on asp and doesn't run in Opera for windows either. So site that detect the browsers can be tricked with Opera's nifty little Identify as... setting. Are our Exchange Mail web page I have to set the ID as to IE 5.0 or NS 4.75 to be allowed acces to it. Once I do that it works fine! All and All it's a great alternative to NS and according to the Opera mailing list the are working on the plugins piece. Roderick P. Person Programmer II (412)454-2616 personrp@ccbh.com http://www.ccbh.com "Fascism is coming back, baby!" - Kevin Bacon - JFK > -----Original Message----- > From: Philip J. Koenig [mailto:pjklist@ekahuna.com] > Sent: June 18, 2001 6:31 AM > To: questions@FreeBSD.ORG > Subject: Re: Opera (was: Linux emulation problem) > > > > Date: Sun, 17 Jun 2001 16:02:12 -0700 > > From: Kelsey Cummings > > > > On Sun, Jun 17, 2001 at 10:37:17PM -0000, dev-null@no-id.com > > wrote: > > > Ok, this isn't a question per se. I did as the two kind > > > replies suggested and installed the linux libs from ports. Now > > > opera is working. But it's not just working. It's working > GREAT! ;-) > > > Unlike that memory scrooge bug farm Nutscrape, Opera isn't > > > crashing/freezing itself, nor is it bringing X down. I'm so > > > impressed with it that I thought it was my responsibility to > > > lighten the path for other readers of this list who may be > > > experiencing Netscape troubles of their own.... > > > > I love it too, but opera does have some quirks that I > hven't figured out > > yet. It doesn't work right with some web apps that we use > internally > > that have always worked with NS and IE. Of course, it *IS* > adware until > > registered. > > > It's a lot better than it used to be. I use it as my main browser > now. It is my unscientific opinion that the vast majority of pages > or apps that won't work with Opera nowadays are ones which pander to > generally non-standard idiosyncracies of IE and Netscape, rather than > flaws with Opera. Well worth the $39, they deserve support for > giving us a nice alternative. (At least they are out front with > their revenue source. I don't consider IE or NS free, you are just > paying for them by legitimizing other aspects of TimeWarner/AOL or > Microsoft's efforts at dominating the net) > > My least favorite aspect at the moment is the bookmark feature, > so for now I use Netscape for bookmarks and open the Netscape html > bookmark file in Opera when I want to access it. (Bless Netscape for > at least making that an html file) > > > Phil > > > > -- > Philip J. Koenig > pjklist@ekahuna.com > Electric Kahuna Systems -- Computers & Communications for the > New Millenium > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > ------_=_NextPart_001_01C0F7F6.047BEDA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: Opera (was: Linux emulation problem)

Opera is great. I been using it for months now. And = the only things that annoy me are the Bookmarks which do strange things = on me (like repeating 10 times in the list). And the lack of plugins. I = don't go to many sites which need plugin support so I can live with = that for now.

As Philip, suggested the pages that won't work with = Opera are catering to IE or NS. I use Opera for Windows at work and the = site it can display are IE and NS specific. I know this because one of = are web sites is but on asp and doesn't run in Opera for windows = either. So site that detect the browsers can be tricked with Opera's = nifty little Identify as... setting. Are our Exchange Mail web page I = have to set the ID as to IE 5.0 or NS 4.75 to be allowed acces to it. = Once I do that it works fine!

All and All it's a great alternative to NS and = according to the Opera mailing list the are working on the plugins = piece.

Roderick P. Person
Programmer II
(412)454-2616
personrp@ccbh.com
http://www.ccbh.com

"Fascism is coming back, baby!"
        - Kevin = Bacon - JFK




> -----Original Message-----
> From: Philip J. Koenig [mailto:pjklist@ekahuna.com]
> Sent: June 18, 2001 6:31 AM
> To: questions@FreeBSD.ORG
> Subject: Re: Opera (was: Linux emulation = problem)
>
>
> > Date: Sun, 17 Jun 2001 16:02:12 = -0700
> > From: Kelsey Cummings = <kgc@sonic.net>
> >
> > On Sun, Jun 17, 2001 at 10:37:17PM -0000, = dev-null@no-id.com
> > wrote:
> > > Ok, this isn't a question per se. I = did as the two kind
> > > replies suggested and installed the = linux libs from ports. Now
> > > opera is working. But it's not just = working. It's working
> GREAT! ;-)
> > > Unlike that memory scrooge bug farm = Nutscrape, Opera isn't
> > > crashing/freezing itself, nor is it = bringing X down. I'm so
> > > impressed with it that I thought it = was my responsibility to
> > > lighten the path for other readers of = this list who may be
> > > experiencing Netscape troubles of = their own....
>
>
> > I love it too, but opera does have some = quirks that I
> hven't figured out
> > yet.  It doesn't work right with some = web apps that we use
> internally
> > that have always worked with NS and = IE.  Of course, it *IS*
> adware until
> > registered.
>
>
> It's a lot better than it used to be.  I = use it as my main browser
> now.  It is my unscientific opinion that = the vast majority of pages
> or apps that won't work with Opera nowadays are = ones which pander to
> generally non-standard idiosyncracies of IE and = Netscape, rather than
> flaws with Opera.  Well worth the $39, = they deserve support for
> giving us a nice alternative.  (At least = they are out front with
> their revenue source.  I don't consider IE = or NS free, you are just
> paying for them by legitimizing other aspects = of TimeWarner/AOL or
> Microsoft's efforts at dominating the = net)
>
> My least favorite aspect at the moment is the = bookmark feature,
> so for now I use Netscape for bookmarks and = open the Netscape html
> bookmark file in Opera when I want to access = it. (Bless Netscape for
> at least making that an html file)
>
>
> Phil
>
>
>
> --
> Philip J. = Koenig           =             =             =    
> pjklist@ekahuna.com
> Electric Kahuna Systems -- Computers & = Communications for the
> New Millenium
>
>
> To Unsubscribe: send mail to = majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" = in the body of the message
>

------_=_NextPart_001_01C0F7F6.047BEDA0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 6:42:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id 60D6737B405 for ; Mon, 18 Jun 2001 06:42:44 -0700 (PDT) (envelope-from simon@comsys.ntu-kpi.kiev.ua) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id 641BE2EED5; Mon, 18 Jun 2001 16:42:26 +0300 (EEST) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.3/8.11.3) with SMTP id f5IDcCQ36307; Mon, 18 Jun 2001 16:38:15 +0300 (EEST) Message-ID: <00c401c0f7f3$2c974a80$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: "Jonathan Lemon" Cc: , "Joe Clarke" References: <200106161948.f5GJmBV12901@prism.flugsvamp.com> Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? Date: Mon, 18 Jun 2001 16:35:27 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I checked some messages in freebsd-stable mailing list (especially thread "Any patch for fxp driver?") and understood that I should tell more about my system: * Intel dual server motherboard (currently just one Pentium II 350Mhz), with onboard SCSI and video (sorry don't know model title) * Two Intel Ether Express 10/100 cards * 10Mbit Lan with 10Mbit 16 ports Compex hub Is there any chance to get fxp driver with my NICs to work properly? Thanks for your help, but I haven't opportunity to test these network cards on some other system and want to be sure, before upgrading my system to 4.3-STABLE. ----- Original Message ----- From: Jonathan Lemon Newsgroups: lucky.freebsd.questions Sent: Saturday, June 16, 2001 11:49 PM Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? > In article you write: > >Hi All, > > > >I've got Intel motherboard and two Intel Ethernet cards: > > > >fxp0: port 0x1060-0x107f mem > >0xfa000000-0xfa0fffff,0xfa204000-0xfa204fff irq 11 at device 11.0 on > >pci0 > >fxp1: port 0x1080-0x109f mem > >0xfa100000-0xfa1fffff,0xfa205000-0xfa205fff irq 5 at device 15.0 on pci0 > > > >Currently my server runs FreeBSD 4.2-STABLE, I'm going to upgrade it to > >4.3-STABLE. I read some information about fxp driver in /usr/src/UPDATING. > >So, here is my question. Does fxp driver work in 4.3-STABLE and do my > >Ethernet cards work with fxp driver on 4.3-STABLE? > > Yes to both. > -- > Jonathan > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 6:49: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.tiscalinet.it (mail-4.tiscalinet.it [195.130.225.150]) by hub.freebsd.org (Postfix) with ESMTP id 1E68037B414 for ; Mon, 18 Jun 2001 06:48:57 -0700 (PDT) (envelope-from ocnlba@tin.it) Received: from nuovo (62.11.1.162) by mail.tiscalinet.it (5.5.031) id 3B175F4D003CA3F6 for freebsd-questions@FreeBSD.org; Mon, 18 Jun 2001 15:48:44 +0200 Message-ID: <004501c0f7fd$de4b3070$a2010b3e@nuovo> From: "paffio" To: Subject: tcp/udp traffic generator Date: Mon, 18 Jun 2001 15:51:26 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'd like to test a firewall and a traffic shaper but I need an aplication (client side and server side) which is able to generates IP traffic across a LAN. I will use that application for testing a redirector too. Does this application already exist ? where can I find it ? thanks paffio To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 6:58:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from newsguy.com (perry.pathlink.com [209.155.233.33]) by hub.freebsd.org (Postfix) with ESMTP id C860B37B403; Mon, 18 Jun 2001 06:58:40 -0700 (PDT) (envelope-from walentyn@newsguy.com) Received: (from walentyn@localhost) by newsguy.com (8.11.0/8.9.1) id f5IDwcO77432; Mon, 18 Jun 2001 06:58:38 -0700 (PDT) Date: Mon, 18 Jun 2001 06:58:38 -0700 (PDT) Message-Id: <200106181358.f5IDwcO77432@newsguy.com> X-Mailer: Direct Read Email by Newsguy News Service To: questions@FreeBSD.ORG From: Walentyn@newsguy.com Subject: Cc: freebsd-emulation@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yesterday, I subscribed to the FreeBSD Stable, Questions and Emulation mailing lists. I got confirmation on all three and mailed back the Majordomo Daemon with the authorization codes. Unfortunately, I am only receiving Stable messages. Having checked the Web archive, I know for a fact that there has been activity since my subscription. Any ideas? Thank you! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 7:16:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dsl-64-193-218-89.telocity.com (dsl-64-193-218-89.telocity.com [64.193.218.89]) by hub.freebsd.org (Postfix) with SMTP id 3CB4A37B401 for ; Mon, 18 Jun 2001 07:16:49 -0700 (PDT) (envelope-from lucas@slb.to) Received: (qmail 30747 invoked by uid 1000); 18 Jun 2001 14:17:03 -0000 Date: Mon, 18 Jun 2001 09:17:03 -0500 From: Lucas Bergman To: jcm@FreeBSD-uk.eu.org Cc: questions@freebsd.org Subject: Re: emacs indentation question Message-ID: <20010618091703.B19099@billygoat.slb.to> Reply-To: lucas@slb.to References: <20010614180524.A43569@dogma.freebsd-uk.eu.org> <20010614181955.A2100@billygoat.slb.to> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010614181955.A2100@billygoat.slb.to>; from lucas@slb.to on Thu, Jun 14, 2001 at 06:19:55PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > When in C/C++ mode, TAB indents to where emacs thinks the text > > should go. How do you add extra tabs at the end of a line, say, > > to line up a group of variable names or #define values? > > Emacs doesn't line up that sort of thing automatically, AFAIK. You > can run your program through indent(1), of course, or you can write > Emacs functions to do what you want. For example, I banged this out > to align a block of #define's: > > (defun slb-c-align-defines-region () > [... schnipp ...] Mea culpa. I just realized that the slb-c-align-defines-region function I posted was an intermediate version that had bugs. Here's the real one: (defun slb-c-align-defines-region (start end) " Align #define values in the current region." (interactive "r") (save-excursion (let ((maxlen 0) (defre "^#[ \t]*define[ \t]+\\([^ \t]+\\)[ \t]+\\(.*\\)$") (padding "") (numspaces 0)) (goto-char start) (while (re-search-forward defre end t) (let ((elen (- (match-end 1) (match-beginning 1)))) (when (> elen maxlen) (setq maxlen elen)))) (goto-char start) (setq padding (make-string (+ 2 maxlen) ?\ )) ;; ;; Taking two regexp searching passes through the region... I'm ;; ashamed of myself. ;; (while (re-search-forward defre end t) (setq numspaces (- maxlen (- (match-end 1) (match-beginning 1)))) (replace-match (concat "#define " (match-string 1) (substring padding 0 (1+ numspaces)) (match-string 2)))))) nil) I'm not trying to contribute gratuitously to off-topic discussion, but I'm trying to keep incorrect stuff out of the archives even more... Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 7:25:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id D4B0337B405 for ; Mon, 18 Jun 2001 07:25:16 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5IEPGO33128; Mon, 18 Jun 2001 10:25:16 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Mon, 18 Jun 2001 10:25:16 -0400 (EDT) From: Joe Clarke To: Wayne Pascoe Cc: Subject: Re: GDM and FreeBSD 4.3-STABLE In-Reply-To: <86zob6jcdb.fsf@pan.penguinpowered.org.uk> Message-ID: <20010618102416.M33092-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Here's my pam.conf for GDM: gdm auth requisite pam_unix.so try_first_pass gdm account requisite pam_unix.so try_first_pass gdm session required pam_permit.so Now, make sure you don't have /etc/pam.d, or pam.conf will be ignored. Joe Clarke On 18 Jun 2001, Wayne Pascoe wrote: > Hi all, > > I am trying to get gdm going on XFree86 4.3-STABLE. I have added a > user and a group named gdm. > > When I start gdm and try to login I get the following messages in the > console window that I launched gdm from : > > Jun 18 11:43:49 ford gdm[615]: no modules loaded for `gdm' service > Jun 18 11:43:49 ford gdm[615]: Couldn't open session for waynep > > If I edit /etc/pam.conf and copy the xdm stuff, and change xdm to gdm, > then restart gdm, then I just get : > > Jun 18 11:46:11 ford gdm[644]: Couldn't open session for waynep > > I am guessing that I don't have the right settings in my pam.conf. man > gdm says that there is no man page for gdm installed. > > Am I right in guessing that this is related to PAM? Can anyone advise > me on a solution ? > > Thanks, > > -- > - Wayne Pascoe > E-mail: wayne.pascoe@realtime.co.uk > Phone : +44 (0) 20 7544 4668 > Mobile: +44 (0) 788 431 1675 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 7:28:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 0ACDD37B405 for ; Mon, 18 Jun 2001 07:28:08 -0700 (PDT) (envelope-from fgleiser@cactus.fi.uba.ar) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.3/8.9.3) with ESMTP id f5IESL946869 for ; Mon, 18 Jun 2001 11:28:21 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Mon, 18 Jun 2001 11:28:21 -0300 (ART) From: Fernando Gleiser To: Subject: Problems with SB16 ISA in 4.3 Message-ID: <20010618112045.U46781-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm having problems with a Sound Blaster 16 (ISA) on FreeBSD 4.3. I have the following lines on my kernel config file: device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 device pcm And when the machine boots the card gets detected: sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 pcm0: on sbc0 sndstat says the card is there: FreeBSD Audio Driver (newpcm) Apr 29 2001 16:36:27 Installed devices: pcm0: at io 0x220 irq 5 drq 1:5 (1p/1r channels duplex) But I can't make the sound work. If I try to play an mp3 file, I get the following error on dmesg: pcm0: play interrupt timeout, channel dead Does anybody know what can be wrong? Thanks in advance, and please excuse my bad english. Fer Fer "When I say "dogs", I'm talking about dogs, which are large, bounding, salivating animals, usually with bad breath. I am not talking about those little squeaky things you can hold on your lap and carry around. Zoologically speaking, these are not dogs at all; they are members of the pillow family." Dave Barry. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 7:53:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lcmail2.lc.ca.gov (lcmail2.lc.ca.gov [165.107.12.11]) by hub.freebsd.org (Postfix) with ESMTP id 6A97D37B401 for ; Mon, 18 Jun 2001 07:53:13 -0700 (PDT) (envelope-from drewt@writeme.com) Received: from CONVERSION-DAEMON by lcmail2.lc.ca.gov (PMDF V5.2-27 #40821) id <0GF400I01S1B9D@lcmail2.lc.ca.gov> for questions@freebsd.org; Mon, 18 Jun 2001 07:53:35 -0700 (PDT) Received: from tagalong ([165.107.42.244]) by lcmail2.lc.ca.gov (PMDF V5.2-27 #40821) with SMTP id <0GF400F5OS1ARP@lcmail2.lc.ca.gov> for questions@freebsd.org; Mon, 18 Jun 2001 07:53:34 -0700 (PDT) Date: Mon, 18 Jun 2001 07:53:42 -0700 From: Drew Tomlinson Subject: RE: which java is basic runtime package In-reply-to: <200106171736.f5HHaqG20214@d.tracker> To: 'David Banning' , questions@freebsd.org Message-id: <5CD46247635BD511B6B100A0CC3F0239259FA4@ldcmsx01.lc.ca.gov> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Content-type: text/plain; charset="us-ascii" Content-transfer-encoding: 7bit Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It's my understanding that it's JRE but I haven't been successful in getting it to work with java apps in Konqueror. Good luck! Drew > -----Original Message----- > From: David Banning [mailto:david@skytrackercanada.com] > Sent: Sunday, June 17, 2001 10:37 AM > To: questions@freebsd.org > Subject: which java is basic runtime package > > > I want to install mindterm and run in java - it says it needs the java > basic runtime package - but there are so many java related > prgrams in the > ports - which am i looking for? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8: 2:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from zeus.dnt.md (dnt.md [195.138.124.37]) by hub.freebsd.org (Postfix) with ESMTP id 332B237B401 for ; Mon, 18 Jun 2001 08:02:10 -0700 (PDT) (envelope-from sl@zeus.dnt.md) Received: (from sl@localhost) by zeus.dnt.md (8.11.1/8.11.1) id f5IF21489463 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 18:02:01 +0300 (EEST) Date: Mon, 18 Jun 2001 18:02:01 +0300 From: Veaceslav Revutchi To: freebsd-questions@freebsd.org Subject: TI PCI-1225 problem on Toshiba 1625CDT Message-ID: <20010618180201.A89073@zeus.dnt.md> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I am having troubles getting a Toshiba laptop (1625CDT) to recognize it's pccard slots. Here is what I get with a generic 4.3R kernel: Jun 15 19:41:25 /kernel: pcic-pci0: irq 0 at device 4.0 on pci0 Jun 15 19:41:25 /kernel: pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] Jun 15 19:41:25 /kernel: pcic-pci1: irq 0 at device 4.1 on pci0 Jun 15 19:41:25 /kernel: pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] and that's it, it wont find any pccard slots. If I start pccardd I would get: Jun 15 19:43:15 pccardd[198]: fatal error: no PC-CARD slots I searched the archives and noticed a simmilar issue discussed but couldn't find a solution to this. If anyone can give a hint on what to try to make it work I will be very appreciative. The whole dmesg output is attached. thanks. slava ----------- dmesg output --------------------- Jun 15 19:41:26 /kernel: Copyright (c) 1992-2001 The FreeBSD Project. Jun 15 19:41:26 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jun 15 19:41:26 /kernel: The Regents of the University of California. All rights reserved. Jun 15 19:41:26 /kernel: FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 Jun 15 19:41:26 /kernel: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC Jun 15 19:41:26 /kernel: Timecounter "i8254" frequency 1193182 Hz Jun 15 19:41:26 /kernel: CPU: AMD-K6(tm) 3D processor (474.89-MHz 586-class CPU) Jun 15 19:41:26 /kernel: Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Jun 15 19:41:26 /kernel: Features=0x8021bf Jun 15 19:41:26 /kernel: AMD Features=0x80000800 Jun 15 19:41:26 /kernel: real memory = 134152192 (131008K bytes) Jun 15 19:41:26 /kernel: avail memory = 126226432 (123268K bytes) Jun 15 19:41:26 /kernel: Preloaded elf kernel "kernel" at 0xc044d000. Jun 15 19:41:27 /kernel: K6-family MTRR support enabled (2 registers) Jun 15 19:41:27 /kernel: md0: Malloc disk Jun 15 19:41:27 /kernel: npx0: on motherboard Jun 15 19:41:27 /kernel: npx0: INT 16 interface Jun 15 19:41:27 /kernel: pcib0: on motherboard Jun 15 19:41:27 /kernel: pci0: on pcib0 Jun 15 19:41:27 /kernel: pcib1: at device 1.0 on pci0 Jun 15 19:41:27 /kernel: pci1: on pcib1 Jun 15 19:41:27 /kernel: pci1: at 0.0 irq 11 Jun 15 19:41:27 /kernel: pcic-pci0: irq 0 at device 4.0 on pci0 Jun 15 19:41:27 /kernel: pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial i sa irq] Jun 15 19:41:27 /kernel: pcic-pci1: irq 0 at device 4.1 on pci0 Jun 15 19:41:27 /kernel: pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial i sa irq] Jun 15 19:41:27 /kernel: isab0: at device 7.0 on pci0 Jun 15 19:41:27 /kernel: isa0: on isab0 Jun 15 19:41:27 /kernel: pci0: (vendor=0x1013, dev=0x6005) at 8.0 irq 5 Jun 15 19:41:27 /kernel: atapci0: port 0xfcf0-0xfcff irq 15 at device 15.0 on pci0 Jun 15 19:41:27 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 15 19:41:27 /kernel: ata1: at 0x170 irq 15 on atapci0 Jun 15 19:41:27 /kernel: pci0: (vendor=0x127a, dev=0x2013) at 16.0 irq 10 Jun 15 19:41:27 /kernel: chip1: at device 17.0 on pci0 Jun 15 19:41:27 /kernel: ohci0: mem 0xfedde000-0xfeddefff irq 9 at device 19.0 on pci0 Jun 15 19:41:27 /kernel: usb0: OHCI version 1.0, legacy support Jun 15 19:41:27 /kernel: usb0: on ohci0 Jun 15 19:41:27 /kernel: usb0: USB revision 1.0 Jun 15 19:41:27 /kernel: uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jun 15 19:41:27 /kernel: uhub0: 2 ports with 2 removable, self powered Jun 15 19:41:27 /kernel: uhub0: device problem, disabling port 1 Jun 15 19:41:27 /kernel: fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jun 15 19:41:27 /kernel: fdc0: FIFO enabled, 8 bytes threshold Jun 15 19:41:27 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Jun 15 19:41:27 /kernel: atkbdc0: at port 0x60,0x64 on isa0 Jun 15 19:41:27 /kernel: atkbd0: flags 0x1 irq 1 on atkbdc0 Jun 15 19:41:27 /kernel: kbd0 at atkbd0 Jun 15 19:41:27 /kernel: psm0: irq 12 on atkbdc0 Jun 15 19:41:28 /kernel: psm0: model Generic PS/2 mouse, device ID 0 Jun 15 19:41:28 /kernel: vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jun 15 19:41:28 /kernel: sc0: at flags 0x100 on isa0 Jun 15 19:41:28 /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jun 15 19:41:28 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 15 19:41:28 /kernel: sio0: type 16550A Jun 15 19:41:28 /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Jun 15 19:41:28 /kernel: ppc0: at port 0x378-0x37f irq 7 on isa0 Jun 15 19:41:28 /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Jun 15 19:41:28 /kernel: plip0: on ppbus0 Jun 15 19:41:28 /kernel: lpt0: on ppbus0 Jun 15 19:41:28 /kernel: lpt0: Interrupt-driven port Jun 15 19:41:28 /kernel: ppi0: on ppbus0 Jun 15 19:41:28 /kernel: ad0: 9590MB [19485/16/63] at ata0-master UDMA33 Jun 15 19:41:28 /kernel: acd0: CDROM at ata1-master using PIO4 Jun 15 19:41:28 /kernel: Mounting root from ufs:/dev/ad0s3a ----------- end of dmesg ------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:26: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 643FB37B403 for ; Mon, 18 Jun 2001 08:25:58 -0700 (PDT) (envelope-from nick@rogness.net) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id f5IGlXD90985; Mon, 18 Jun 2001 11:47:33 -0500 (CDT) (envelope-from nick@rogness.net) Date: Mon, 18 Jun 2001 11:47:33 -0500 (CDT) From: Nick Rogness X-Sender: nick@cody.jharris.com To: Simon Maycock Cc: freebsd-questions@FreeBSD.ORG Subject: Re: natd and Apache Port Based Virtual Hosting In-Reply-To: <20010618.7283600@barney.home.mrhagar.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Simon Maycock wrote: > Can anyone tell me how I configure Port based Virtual Hosts in Apache > so that they correctly work with translated packets. It is my > understanding that all natd is doing is taking the external address, > striping it and adding an internal address. If this is the case then > I believe the following entries in my httd.conf should be working? > > # Use name-based virtual hosting. > # > #NameVirtualHost 192.168.1.201 > Listen 80 > Listen 8080 > Listen 8081 > Listen 8082 > # > # VirtualHost example: > # Almost any Apache directive may go into a VirtualHost container. # > The first VirtualHost section is used for requests without a known # > server name. > # > > ServerAdmin a@b.com > DocumentRoot /data/www/abc > ServerName 192.168.1.201:8080 > ErrorLog /data/www/abc/logs/error_log > TransferLog /data/www/abc/logs/access_log > > > > ServerAdmin a@b.com > DocumentRoot /data/www/xyz > ServerName 192.168.1.201:8082 > ErrorLog /data/www/xyz/logs/error_log > TransferLog /data/www/xyz/logs/access_log > > > This works fine from any internal host, but not from external ones, which > just default to the default site at port 80. ServerAdmin c@d.com DocumentRoot /data/www/cda ServerName 192.168.1.201 ErrorLog /data/www/cda/logs/error_log TransferLog /data/www/cda/logs/access_log > In an attempt to get this problem resolved I have set the firewall to > allow all and my rc.conf calls the my natd.conf file containing these > enteries. > > # > log yes > redirect_port tcp 192.168.2.201:80 80 > redirect_port tcp 192.168.2.201:8080-8082 8080-8082 > > Any help will be gratefully received. Is 192.168.1.201 your insdie IP of the same machine that carries your Public address (natd runs on it)? If so, then the redirect_port statements above are not necessary. Nick Rogness - Keep on Routing in a Free World... "FreeBSD: The Power to Serve!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:29:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd.org (ntmcn.megabytescomputers.com [216.215.166.18]) by hub.freebsd.org (Postfix) with SMTP id 1322A37B401 for ; Mon, 18 Jun 2001 08:29:21 -0700 (PDT) (envelope-from Al@megabytescomputers.com) From: Megabytes@FreeBSD.ORG, Computers@FreeBSD.ORG, &@FreeBSD.ORG, Networking@FreeBSD.ORG, Inc.@FreeBSD.ORG Date: Mon, 18 Jun 2001 11:38:06 To: freebsd-questions@freebsd.org Subject: Seamless Functionality MIME-Version: 1.0 Content-Type: text/plain;charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <20010618152921.1322A37B401@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG WHY MEGABYTES? Businesses today need to manage technology for optimal performance while tending to what's most important-finding and retaining customers. Megabytes offers Mega solutions and services to the small businesses and the large corporate sector. Visit our web site at: http://www.megabytescomputers.com Services Include ｷ Personalized service with cutting edge technology ｷ Microsoft Certified Professionals, Microsoft Certified System Engineers. ｷ Routine maintenance/pc help desk and on site support ｷ IT consulting ｷ Project management ｷ Backup system installations ｷ System development ｷ Novell support It only makes sense to utilize all we have to offer. We understand your business is important and will work around the clock to keep your business up and running! We've been in business for over fifteen years.! This is a one time mailing! AL Scott Marketing Director/MCSE al@megabytescomputers.com (904)880-6366 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:29:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ruby.he.net (ruby.he.net [216.218.187.2]) by hub.freebsd.org (Postfix) with ESMTP id 707D837B401 for ; Mon, 18 Jun 2001 08:29:31 -0700 (PDT) (envelope-from bill@wiliweld.com) Received: from corten8.billschoolcraft.com (adsl-63-193-247-201.dsl.snfc21.pacbell.net [63.193.247.201]) by ruby.he.net (8.8.6/8.8.2) with ESMTP id IAA24105; Mon, 18 Jun 2001 08:29:22 -0700 Date: Mon, 18 Jun 2001 08:28:49 -0700 (PDT) From: Bill Schoolcraft X-Sender: bill@corten8.billschoolcraft.com To: Greg Lehey Cc: FreeBSD Questions Subject: Re: digital camera In-Reply-To: <20010518114030.J55915@wantadilla.lemis.com> Message-ID: System-ID: [en] (I; Linux 2.2.17-21mdk i86pc) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At Fri, 18 May 2001 it looks like Greg Lehey composed: GL-->There are various things in the Ports Collection. I personally use a GL-->camera with Compact Flash memory (a Nikon CoolPix 880, which I quite GL-->like). I insert the CF card into a PCMCIA adaptor and mount it on my GL-->laptop as an MS-DOS file system. See GL-->http://echunga.lemis.com/~grog/diary-nov2000.html, 10 November 2000, GL-->for more details. GL--> GL-->Greg Hello Family, I was reading the examples at http://echunga.lemis.com/~grog/diary-nov2000.html and noticed that the compact flash card was mounted from /dev/ad6s1 and my devices stop at /dev/ad3* I'm using a Toshiba-1715xcds laptop. I'm also getting some action in /var/log/messages that's noticing the card (I think) (each line seperated by space) ########################################################### Jun 18 07:14:39 laptop pccardd[52]: wi0: Lucent Technologies (WaveLAN/IEEE) inserted. Jun 18 07:14:44 laptop pccardd[52]: Card "SunDisk"("SDP") [5/3 0.6] [(null)] matched "SunDisk" ("/.*/") [(null)] [(null)] Jun 18 07:14:49 laptop /kernel: ata4 at port 0x280-0x28f irq 5 slot 1 on pccard1 Jun 18 07:14:59 laptop /kernel: ata4-master: ata_command: timeout waiting for intr Jun 18 07:15:00 laptop /kernel: ata4-master: identify failed Jun 18 07:14:59 laptop pccardd[52]: ata4: SunDisk (/.*/) inserted. Jun 18 07:14:59 laptop pccardd[52]: pccardd started ########################################################## Now this is a triple booted laptop and I've confirmed that the SanDisk, CompactFlash PC Card Holder works with Linux, Windows_ME and now the final hurdle is FreeBSD. When setting up my wirless Orinoco card FreeBSD was by far the easiest, with Linux second (recompile kernel) and Windows_ME has not yet worked and the software for the card was of course designed for Windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:30:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.mail.pas.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 1845337B408 for ; Mon, 18 Jun 2001 08:30:03 -0700 (PDT) (envelope-from ipthomas_77@yahoo.com) Received: from scraemondaemon.my.domain (sdn-ar-002nybuffP331.dialsprint.net [168.191.115.109]) by falcon.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id IAA08938; Mon, 18 Jun 2001 08:29:36 -0700 (PDT) Received: (from ipt@localhost) by scraemondaemon.my.domain (8.9.3/8.9.3) id LAA00517; Mon, 18 Jun 2001 11:20:01 -0400 (EDT) (envelope-from ipt) From: "Ian P. Thomas" Message-Id: <200106181520.LAA00517@scraemondaemon.my.domain> Subject: Re: How to create a script to shutdown the ppp connection To: hueber@riic.at (Gernot Hueber) Date: Mon, 18 Jun 2001 11:18:41 -0400 (EDT) Cc: freebsd-questions@freebsd.org In-Reply-To: from "Gernot Hueber" at Jun 18, 2001 09:10:35 AM X-Mailer: ELM [version 2.5 PL5] MIME-Version: 1.0 Content-Type: text/plain; charset=DISPLAY Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a c shell script that does this. If you want I can email it to you. Ian In the last episode, Gernot Hueber stated... > > At 15:22 18.06.01 +0800, Alex Kwan wrote: > >Hi! > > > >(1) How to create a script forced to shutdown the ppp > > connection before the timeout? (I am using the > > user mode ppp). > > man 8 pppctl > will give you examples > > > >(2) Which package can monitor the ppp connection > > (transfer rate ..etc)? > > > >Thanks > > run pppctl or if using ppp interactively > use the show command, have a look at man 8 ppp command for > options! > > HTH > > Gernot > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > Dipl.-Ing. Gernot Hueber > Institut fr Integrierte Schaltungen > Freist臈ter Strasse 315/2 > A-4040 Linz > > Tel: +43 732 2468-7118, Fax: -7126 > E-mail: hueber@riic.at > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:34:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.pace.edu (ntutil.pace.edu [205.232.111.9]) by hub.freebsd.org (Postfix) with ESMTP id E727337B401 for ; Mon, 18 Jun 2001 08:34:27 -0700 (PDT) (envelope-from js43064n@pace.edu) Received: from stmail.pace.edu (205.232.111.7:3165) by smtp.pace.edu (LSMTP for Windows NT v1.1b) with SMTP id <0.A8A2E4D5@smtp.pace.edu>; Mon, 18 Jun 2001 11:34:28 -0400 Date: Mon, 18 Jun 2001 11:34:26 -0400 Message-Id: <200106181134.AA136839294@stmail.pace.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: "Jonathan Slivko" Reply-To: X-Sender: To: Subject: Digital Camera & FreeBSD 4.3 X-Mailer: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Does anyone know what models of digital cameras are supported under the FreeBSD 4.3-STABLE operating system? I am looking for one in the $200-$250 range. TIA! -- Jonathan -- Jonathan M. Slivko Tech. Support Rep., Black Lotus Communications Server Administrator, AsylumNet IRC Network http://www.blacklotus.net -- check us out! -- ___________________________________________________________________ ___ Sent via the Pace University Mail system at stmail.pace.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 8:46:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id AC69C37B403 for ; Mon, 18 Jun 2001 08:46:29 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 31987 invoked by uid 100); 18 Jun 2001 15:46:28 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15150.8788.445523.840597@guru.mired.org> Date: Mon, 18 Jun 2001 10:46:28 -0500 To: Bill Moran Cc: questions@freebsd.org Subject: Re: connecting postscript network printer In-Reply-To: <49848917@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bill Moran types: > outlawtx@bga.com wrote: > > I have a Hewlett-Packard IIISi printer connected directly to my local area > > network. It is a postscript printer. How do I get FreeBSD to talk to > > it. I am running version 4.2 of FreeBSD. > > If it's a network printer (connected via ethernet) check to see if it > does LPD print spooling, if so, you can use the native LPD daemon. > Then look into either magicfilter or apsfilter - both of which will > automagically convert print jobs to the correct postscript format for > you. Personally, I use magicfilter, but I don't know if there's any > advantage to one or the other of these. Assuming the IIISi is similar to other hp laserjets, then apsfilter has one disadvantage: it treats everything as if it were a postscript only printer. So it can't handle files in the HP printer languages at all, while magicfilter can. Likewise, apsfilter translates ascii text to postscript via a2ps before sending it to the printer, while magicfilter will send them directly to the printer, setting the printer to the proper mode for printing Unix text files. If the IIISi is postscript only, then the only difference is that magicfilter defautls to enscript instead of a2ps to print flat text files. Changing the magicfilter script file to use a2ps is trivial; I'm not sure how hard it would be to change apsfilter to use enscript. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9: 3:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 10B8A37B401 for ; Mon, 18 Jun 2001 09:03:20 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 32444 invoked by uid 100); 18 Jun 2001 16:03:19 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15150.9799.509874.903122@guru.mired.org> Date: Mon, 18 Jun 2001 11:03:19 -0500 GTo: outlawtx@bga.com Cc: questions@freebsd.org Subject: Re: are magicfilter and appsfilter for non-postscript printers? In-Reply-To: <19543647@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG outlawtx@bga.com types: > Are magicfilter and appsfilter for non-postscript printers? They aren't "for" any type of printer. They can be used with both postscript and non-postscript printers. What they both do is examine the document to guess what kind of file it is, and then arrange to run the appropriate tools on it to create a representation that the printer can print. This lets you print myfile.html as it would show in a browser with the command "lpr myfile.html" instead of the command html2ps myfile.html | gs -q -dSAFER -dNOPAUSE -r600 -sDEVICE=ljet4 -sOutputFile=- - | lpr apsfilter does this by translating everything to postscript, and then either sending that to the printer or using ghostscript to convert that to a bitmap to send to the printer. magicfilter is a little bit more general, using a script file that pairs what to examine with the conversions that need to be made. Since most Unix tools know how to generate postscript, this means it behaves just like apsfilter for most files. For those that the printer can handle directly, it will pass them to the printer where apsfilter would convert them to postscript or just fail. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9: 6:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd.org (ntmcn.megabytescomputers.com [216.215.166.18]) by hub.freebsd.org (Postfix) with SMTP id B7C5937B408 for ; Mon, 18 Jun 2001 09:06:08 -0700 (PDT) (envelope-from Al@megabytescomputers.com) From: Megabytes@FreeBSD.ORG, Computers@FreeBSD.ORG, &@FreeBSD.ORG, Networking@FreeBSD.ORG, Inc.@FreeBSD.ORG Date: Mon, 18 Jun 2001 12:15:03 To: questions@freebsd.org Subject: Seamless Functionality MIME-Version: 1.0 Content-Type: text/plain;charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <20010618160609.B7C5937B408@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG WHY MEGABYTES? Businesses today need to manage technology for optimal performance while tending to what's most important-finding and retaining customers. Megabytes offers Mega solutions and services to the small businesses and the large corporate sector. Visit our web site at: http://www.megabytescomputers.com Services Include ｷ Personalized service with cutting edge technology ｷ Microsoft Certified Professionals, Microsoft Certified System Engineers. ｷ Routine maintenance/pc help desk and on site support ｷ IT consulting ｷ Project management ｷ Backup system installations ｷ System development ｷ Novell support It only makes sense to utilize all we have to offer. We understand your business is important and will work around the clock to keep your business up and running! We've been in business for over fifteen years.! This is a one time mailing! AL Scott Marketing Director/MCSE al@megabytescomputers.com (904)880-6366 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9:12:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id 7993C37B401 for ; Mon, 18 Jun 2001 09:12:11 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.4/8.11.3) with ESMTP id f5IFiOw05323; Mon, 18 Jun 2001 11:44:24 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200106181544.f5IFiOw05323@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: "Andrey Simonenko" Cc: "Jonathan Lemon" , freebsd-questions@FreeBSD.ORG, "Joe Clarke" Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? In-Reply-To: Your message of "Mon, 18 Jun 2001 16:35:27 +0400." <00c401c0f7f3$2c974a80$6d36120a@comsys.ntukpi.kiev.ua> From: dochawk@psu.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 18 Jun 2001 11:44:24 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andrey added, > I checked some messages in freebsd-stable mailing list (especially > thread "Any patch for fxp driver?") and understood that I should tell more > about my system: > * Two Intel Ether Express 10/100 cards > * 10Mbit Lan with 10Mbit 16 ports Compex hub > > Is there any chance to get fxp driver with my NICs to work properly? If there isn't, you can't read this :) you might try pulling one card first; I've never tried using two. You also need the fxp option in the kernel. hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9:14:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from prism.flugsvamp.com (cb58709-a.mdsn1.wi.home.com [24.17.241.9]) by hub.freebsd.org (Postfix) with ESMTP id CA14B37B407 for ; Mon, 18 Jun 2001 09:14:45 -0700 (PDT) (envelope-from jlemon@flugsvamp.com) Received: (from jlemon@localhost) by prism.flugsvamp.com (8.11.0/8.11.0) id f5IGE0d90575; Mon, 18 Jun 2001 11:14:00 -0500 (CDT) (envelope-from jlemon) Date: Mon, 18 Jun 2001 11:14:00 -0500 (CDT) From: Jonathan Lemon Message-Id: <200106181614.f5IGE0d90575@prism.flugsvamp.com> To: simon@comsys.ntu-kpi.kiev.ua, questions@freebsd.org Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? X-Newsgroups: local.mail.freebsd-questions In-Reply-To: References: Organization: Cc: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In article you write: >I checked some messages in freebsd-stable mailing list (especially >thread "Any patch for fxp driver?") and understood that I should tell more >about my system: > >* Intel dual server motherboard (currently just one Pentium II 350Mhz), > with onboard SCSI and video (sorry don't know model title) >* Two Intel Ether Express 10/100 cards >* 10Mbit Lan with 10Mbit 16 ports Compex hub > >Is there any chance to get fxp driver with my NICs to work properly? >Thanks for your help, but I haven't opportunity to test these network >cards on some other system and want to be sure, before upgrading >my system to 4.3-STABLE. If the fxp cards work in 4.2-stable, they will work in 4.3-stable. -- Jonathan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9:18:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 02B0F37B403 for ; Mon, 18 Jun 2001 09:18:25 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5IGHVX26690; Mon, 18 Jun 2001 12:17:34 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Mon, 18 Jun 2001 12:17:31 -0400 (EDT) From: Joe Clarke To: Cc: Andrey Simonenko , Jonathan Lemon , Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? In-Reply-To: <200106181544.f5IFiOw05323@fac13.ds.psu.edu> Message-ID: <20010618121536.K50737-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have: fxp0: port 0x1400-0x143f mem 0xf4000000-0xf40fffff,0xf4201000-0xf4201fff irq 10 at device 14.0 on pci0 fxp1: port 0x1440-0x147f mem 0xf4100000-0xf41fffff,0xf4202000-0xf4202fff irq 15 at device 15.0 on pci0 working in 4.3-RELEASE at 100/full connected to Cisco Catalyst switches, but I have not tried -stable. I kept reading reports about timeouts in -stable. I think they've all be resolved now. Joe Clarke On Mon, 18 Jun 2001 dochawk@psu.edu wrote: > Andrey added, > > > I checked some messages in freebsd-stable mailing list (especially > > thread "Any patch for fxp driver?") and understood that I should tell more > > about my system: > > > * Two Intel Ether Express 10/100 cards > > * 10Mbit Lan with 10Mbit 16 ports Compex hub > > > > Is there any chance to get fxp driver with my NICs to work properly? > > If there isn't, you can't read this :) > > you might try pulling one card first; I've never tried using two. > > You also need the fxp option in the kernel. > > hawk > > > -- > Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign > dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail > These opinions will not be those of X and postings > Penn State until it pays my retainer. / \ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 9:31:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id C8B3537B403 for ; Mon, 18 Jun 2001 09:31:24 -0700 (PDT) (envelope-from hawk@fac13.ds.psu.edu) Received: from fac13.ds.psu.edu (localhost [127.0.0.1]) by fac13.ds.psu.edu (8.11.4/8.11.3) with ESMTP id f5IG3gw05556; Mon, 18 Jun 2001 12:03:42 -0400 (EDT) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200106181603.f5IG3gw05556@fac13.ds.psu.edu> X-Mailer: exmh version 2.3.1 01/18/2001 with nmh-1.0.4 To: Joe Clarke Cc: Andrey Simonenko , Jonathan Lemon , freebsd-questions@FreeBSD.ORG Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? In-Reply-To: Your message of "Mon, 18 Jun 2001 12:17:31 EDT." <20010618121536.K50737-100000@shumai.marcuscom.com> From: dochawk@psu.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 18 Jun 2001 12:03:42 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > working in 4.3-RELEASE at 100/full connected to Cisco Catalyst switches, > but I have not tried -stable. I kept reading reports about timeouts in > -stable. I think they've all be resolved now. I'm using -stable for my single fxp on my laptop. hawk -- Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10: 3:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from po3.glue.umd.edu (po3.glue.umd.edu [128.8.10.123]) by hub.freebsd.org (Postfix) with ESMTP id 03BF837B401 for ; Mon, 18 Jun 2001 10:03:34 -0700 (PDT) (envelope-from bfoz@glue.umd.edu) Received: from darkstar (darkstar.umd.edu [128.8.215.163]) by po3.glue.umd.edu (8.10.1/8.10.1) with ESMTP id f5IH3Wg01168 for ; Mon, 18 Jun 2001 13:03:33 -0400 (EDT) Message-ID: <000c01c0f818$a2c077c0$a3d70880@darkstar> From: "Brandon Fosdick" To: Subject: Undelete? Date: Mon, 18 Jun 2001 13:03:45 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0009_01C0F7F7.1B74B4F0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0009_01C0F7F7.1B74B4F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Is there any sort of undelete function? One single typo and I deleted = the wrong directory. Next time I won't make directory names that are so = close together. ------=_NextPart_000_0009_01C0F7F7.1B74B4F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Is there any sort of undelete function? = One single=20 typo and I deleted the wrong directory. Next time I won't make directory = names=20 that are so close together.
 
------=_NextPart_000_0009_01C0F7F7.1B74B4F0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:16:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 0EB0937B401 for ; Mon, 18 Jun 2001 10:16:34 -0700 (PDT) (envelope-from jcm@freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97] ident=root) by serenity.mcc.ac.uk with esmtp (Exim 2.05 #6) id 15C2dc-0002ME-00 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 18:16:32 +0100 Received: (from jcm@localhost) by dogma.freebsd-uk.eu.org (8.11.3/8.11.1) id f5IHGVf42370 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 18:16:31 +0100 (BST) (envelope-from jcm) Date: Mon, 18 Jun 2001 18:16:31 +0100 From: j mckitrick To: freebsd-questions@freebsd.org Subject: change word or repeat operation in emacs? Message-ID: <20010618181631.A42271@dogma.freebsd-uk.eu.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm still getting used to emacs, and overall i love it. But here are a few commands i loved in vi that i haven't yet discovered emacs analogues for. I will often use 'cw' in vi to change a word (usually a variable name, constant, etc) and then go to another word i want to change as well. In vi i can just use '.' to do this. Is there a similar way to 'change-word' then 'repeat-operation' in emacs, besides search-and-replace'? Jonathon -- Tech support: Try this. Arrange the parts in neat piles. Stand on your chair until you can see over your cubicle walls. Now shout "Does anybody know how to read a manual?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:33:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f195.law9.hotmail.com [64.4.9.195]) by hub.freebsd.org (Postfix) with ESMTP id 615F537B406 for ; Mon, 18 Jun 2001 10:33:44 -0700 (PDT) (envelope-from wms121a1@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 18 Jun 2001 10:33:40 -0700 Received: from 204.64.251.235 by lw9fd.law9.hotmail.msn.com with HTTP; Mon, 18 Jun 2001 17:33:40 GMT X-Originating-IP: [204.64.251.235] From: "W. Warren" To: freebsd-questions@FreeBSD.org Subject: ..64 bit Java... Date: Mon, 18 Jun 2001 12:33:40 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 18 Jun 2001 17:33:40.0619 (UTC) FILETIME=[D070A5B0:01C0F81C] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey guys.. Here is my mailing address: W. Warren P.O. Box 7730 Fort Worth, TX 76111-0730 alt email: wms121@hotmail.com Questions: 1) Will FreeBSD 64bit run on the new POWER4 chip (they have 64 bit Linux already)? 2) Will that be compatible to the AIX5L version of 64 bit Java? 3) The old IBM version of Java OS is interesting..you could do various versions of JVM's (Java Virtual Machines)..and styles with open ports to many languages and OS's. For instance what would be required to run a 256 bit version of FreeBSD on a JVM with attendant AIX support (if needed)? 1024 bit version? This assumes a reconfigurable JVM processor array up to 4096 processor in linked thread mode. 256 bit and higher OS's would be useful for emulating Optical Computers and Quantum Computers (1024, and 4096 bit versions could emulate this current universe down to the sub-quark level). William Warren _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:35:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from whale.sunbay.crimea.ua (whale.sunbay.crimea.ua [212.110.138.65]) by hub.freebsd.org (Postfix) with ESMTP id CCE1A37B403 for ; Mon, 18 Jun 2001 10:35:33 -0700 (PDT) (envelope-from ru@whale.sunbay.crimea.ua) Received: (from ru@localhost) by whale.sunbay.crimea.ua (8.11.2/8.11.2) id f5IHZ7k38680; Mon, 18 Jun 2001 20:35:07 +0300 (EEST) (envelope-from ru) Date: Mon, 18 Jun 2001 20:35:07 +0300 From: Ruslan Ermilov To: Brandon Fosdick Cc: questions@FreeBSD.ORG Subject: Re: Undelete? Message-ID: <20010618203507.H29910@sunbay.com> Mail-Followup-To: Brandon Fosdick , questions@FreeBSD.ORG References: <000c01c0f818$a2c077c0$a3d70880@darkstar> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <000c01c0f818$a2c077c0$a3d70880@darkstar>; from bfoz@glue.umd.edu on Mon, Jun 18, 2001 at 01:03:45PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Jun 18, 2001 at 01:03:45PM -0400, Brandon Fosdick wrote: > > Is there any sort of undelete function? One single typo and I deleted > the wrong directory. Next time I won't make directory names that are > so close together. > Yes, it's called dump(8) and restore(8). -- Ruslan Ermilov Oracle Developer/DBA, ru@sunbay.com Sunbay Software AG, ru@FreeBSD.org FreeBSD committer, +380.652.512.251 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:37:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay.tecc.co.uk (luggage.tecc.co.uk [193.128.6.129]) by hub.freebsd.org (Postfix) with SMTP id ED42D37B401 for ; Mon, 18 Jun 2001 10:37:33 -0700 (PDT) (envelope-from andy@tecc.co.uk) Received: from southampton [195.217.37.155] by relay.tecc.co.uk with smtp (Exim 1.70 #1) id 15C2xw-0001Ma-00; Mon, 18 Jun 2001 18:37:32 +0100 From: "Andy [Tecc Nops]" To: "Brandon Fosdick" , Subject: RE: Undelete? Date: Mon, 18 Jun 2001 18:37:32 +0100 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0004_01C0F825.BC9C9270" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: <000c01c0f818$a2c077c0$a3d70880@darkstar> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0004_01C0F825.BC9C9270 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Yes, you can undelete by getting out ur last backup and copying from there. You do backup right? If not, no undelete I'm afraid ;) btw, if you don't backup now I bet you will in future... that's how I came to do my first "man dump" ;) Regards Ak -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Brandon Fosdick Sent: 18 June 2001 18:04 To: questions@freebsd.org Subject: Undelete? Is there any sort of undelete function? One single typo and I deleted the wrong directory. Next time I won't make directory names that are so close together. ------=_NextPart_000_0004_01C0F825.BC9C9270 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Yes,=20 you can undelete by getting out ur last backup
and=20 copying from there. You do backup right? If not,
no=20 undelete I'm afraid ;)
 
btw,=20 if you don't backup now I bet you will in future...
that's=20 how I came to do my first "man dump" ;)
 
Regards
Ak
-----Original Message-----
From:=20 owner-freebsd-questions@FreeBSD.ORG=20 [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of = Brandon=20 Fosdick
Sent: 18 June 2001 18:04
To:=20 questions@freebsd.org
Subject: = Undelete?

Is there any sort of undelete = function? One=20 single typo and I deleted the wrong directory. Next time I won't make=20 directory names that are so close together.
 
------=_NextPart_000_0004_01C0F825.BC9C9270-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:38: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12305.mail.yahoo.com (web12305.mail.yahoo.com [216.136.173.103]) by hub.freebsd.org (Postfix) with SMTP id 07AFB37B406 for ; Mon, 18 Jun 2001 10:38:00 -0700 (PDT) (envelope-from dollarbilfjr@yahoo.com) Message-ID: <20010618173756.26716.qmail@web12305.mail.yahoo.com> Received: from [24.14.206.104] by web12305.mail.yahoo.com; Mon, 18 Jun 2001 10:37:56 PDT Date: Mon, 18 Jun 2001 10:37:56 -0700 (PDT) From: DOLLARBILL FIORE Subject: netscape and plugins - matched set ? - also floppies on adapted 1542b To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG FBSD4.0 adaptec 1542B scsi controller disk/w/floppies has problems with floppies?....used to work ok w/ FBSD2.2 ??? FBSD4.0 When using netscape 4.76 (linux cuz realplayer was linux) with plugins gives core dumps.... is a matched set available?/can someone recommend a native FBSD netscape/realplayer(w/ video?) as a matched set ? thanx in advance....pls respond via email to this address. ===== William F. Fiore Jr. ($bilfjr) 86 harris avenue cranston, R.I. 02920 USA-EDT Please use this # to leave msg indicating when is best time call you back 1-877-789-1992 USA (internet vmail/fax-tollfree in usa) dollarbilfjr@yahoo.com www.geocities.com/dollarbilfjr/dollarbilfjr.html __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 10:46:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nsmail.corp.globalstar.com (gibraltar.globalstar.com [207.88.248.142]) by hub.freebsd.org (Postfix) with ESMTP id 1E45537B407 for ; Mon, 18 Jun 2001 10:46:33 -0700 (PDT) (envelope-from crist.clark@globalstar.com) Received: from globalstar.com ([207.88.153.184]) by nsmail.corp.globalstar.com (Netscape Messaging Server 4.15) with ESMTP id GF500U00.LGF; Mon, 18 Jun 2001 10:46:06 -0700 Message-ID: <3B2E3E76.76D9A91E@globalstar.com> Date: Mon, 18 Jun 2001 10:46:30 -0700 From: "Crist Clark" Organization: Globalstar LP X-Mailer: Mozilla 4.77 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Richard Tobin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Modem/PPP Problem References: <200106172249.XAA20553@banks.cogsci.ed.ac.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Richard Tobin wrote: > > > But then as I start to type the 'atdt' more and more of the > > conversation echoes back. If I keep hitting I see more and > > more of what happened earlier in the conversation. > > I saw this once on a PCMCIA modem. I never fixed it, but it seemed > like it was probably an IRQ problem - the system wasn't seeing > interrupts and only getting the echoed characters when it wrote new > ones. > > Can you try a different IRQ? Yep. That was it. I took a half-glance at it once right when I started, and thought everything was OK... I forgot that I had cracked the case on this box and added a new PCI card since last time I editted the free IRQs in the /etc/pccard.conf. I fixed up the free IRQ list, restarted pccardd(8), and I was in business. Thanks for the wake up call. -- Crist J. Clark Network Security Engineer crist.clark@globalstar.com Globalstar, L.P. (408) 933-4387 FAX: (408) 933-4926 The information contained in this e-mail message is confidential, intended only for the use of the individual or entity named above. If the reader of this e-mail is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this e-mail in error, please contact postmaster@globalstar.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 11:22:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.mail.pas.earthlink.net (scaup.mail.pas.earthlink.net [207.217.121.49]) by hub.freebsd.org (Postfix) with ESMTP id D812037B401 for ; Mon, 18 Jun 2001 11:22:54 -0700 (PDT) (envelope-from smaycock@earthlink.net) Received: from barney.home.mrhagar.com (cpe-24-221-103-14.az.sprintbbd.net [24.221.103.14]) by scaup.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id LAA07906 for ; Mon, 18 Jun 2001 11:22:48 -0700 (PDT) From: Simon Maycock Date: Mon, 18 Jun 2001 18:21:51 GMT Message-ID: <20010618.18215100@barney.home.mrhagar.com> Subject: Found my mistake ! Re: natd and Apache Port Based Virtual Hosting To: freebsd-questions@FreeBSD.ORG In-Reply-To: References: X-Mailer: Mozilla/3.0 (compatible; StarOffice/5.2;Linux) X-Priority: 3 (Normal) MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG So the archives can record my stupidity for ever I wanted to share what = I=20 had wrong and thank all thoses that helped me! Hopefully others will=20 learn from my mistake. For the record I have two FreeBSD boxes connected together, one the=20 gateway and one the Apache server. The IP's are as follows... public_IP |gateway| 192.168.2.202 ------- 192.168.2.201 |apache |=20 192.168.1.201 --- internal_network I had natd correctly setup with the following enteries: # log yes redirect_port tcp 192.168.2.201:80 80 redirect_port tcp 192.168.2.201:8080-8082 8080-8082 All that was wrong was I was referencing the wrong interface in my=20 httpd.conf file! i.e. As soon as I changed the .1.201 to .2.201 and restarted apche it worked = fine. Thanks again, Simon >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< On 6/18/01, 9:47:33 AM, Nick Rogness wrote regarding = Re:=20 natd and Apache Port Based Virtual Hosting: > On Mon, 18 Jun 2001, Simon Maycock wrote: > > Can anyone tell me how I configure Port based Virtual Hosts in Apach= e > > so that they correctly work with translated packets. It is my > > understanding that all natd is doing is taking the external address,= > > striping it and adding an internal address. If this is the case the= n > > I believe the following entries in my httd.conf should be working? > > > > # Use name-based virtual hosting. > > # > > #NameVirtualHost 192.168.1.201 > > Listen 80 > > Listen 8080 > > Listen 8081 > > Listen 8082 > > # > > # VirtualHost example: > > # Almost any Apache directive may go into a VirtualHost container. #= > > The first VirtualHost section is used for requests without a known #= > > server name. > > # > > > > ServerAdmin a@b.com > > DocumentRoot /data/www/abc > > ServerName 192.168.1.201:8080 > > ErrorLog /data/www/abc/logs/error_log > > TransferLog /data/www/abc/logs/access_log > > > > > > > > ServerAdmin a@b.com > > DocumentRoot /data/www/xyz > > ServerName 192.168.1.201:8082 > > ErrorLog /data/www/xyz/logs/error_log > > TransferLog /data/www/xyz/logs/access_log > > > > > > This works fine from any internal host, but not from external ones, = which > > just default to the default site at port 80. > > ServerAdmin c@d.com > DocumentRoot /data/www/cda > ServerName 192.168.1.201 > ErrorLog /data/www/cda/logs/error_log > TransferLog /data/www/cda/logs/access_log > > > In an attempt to get this problem resolved I have set the firewall t= o > > allow all and my rc.conf calls the my natd.conf file containing thes= e > > enteries. > > > > # > > log yes > > redirect_port tcp 192.168.2.201:80 80 > > redirect_port tcp 192.168.2.201:8080-8082 8080-8082 > > > > Any help will be gratefully received. > Is 192.168.1.201 your insdie IP of the same machine that carries= > your Public address (natd runs on it)? If so, then the > redirect_port statements above are not necessary. > Nick Rogness > - Keep on Routing in a Free World... > "FreeBSD: The Power to Serve!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 11:33:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout02.sul.t-online.de (mailout02.sul.t-online.com [194.25.134.17]) by hub.freebsd.org (Postfix) with ESMTP id 6CBE637B403 for ; Mon, 18 Jun 2001 11:33:37 -0700 (PDT) (envelope-from Ulf.Kister@t-online.de) Received: from fwd02.sul.t-online.de by mailout02.sul.t-online.de with smtp id 15C3q6-0004E7-0F; Mon, 18 Jun 2001 20:33:30 +0200 Received: from harry.my.net (320020256018-0001@[217.2.43.202]) by fwd02.sul.t-online.com with esmtp id 15C3pr-0Y5EquC; Mon, 18 Jun 2001 20:33:15 +0200 Received: (from kister@localhost) by harry.my.net (8.11.4/8.11.1) id f5IIVda06790; Mon, 18 Jun 2001 20:31:39 +0200 (CEST) (envelope-from kister) To: Joe Clarke Subject: Re: nautilus-1.0.3 from ports behaves weird References: <20010617161506.Y27076-100000@shumai.marcuscom.com> Cc: freebsd-questions@FreeBSD.ORG From: Ulf.Kister@t-online.de (Ulf Kister) Date: 18 Jun 2001 20:31:39 +0200 In-Reply-To: <20010617161506.Y27076-100000@shumai.marcuscom.com> Message-ID: <87itht1vxw.fsf@harry.my.net> Lines: 11 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Sender: 320020256018-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, thanks for the clear statement :-) Joe Clarke writes: > Nautilus and evolution don't work on FreeBSD yet. You're welcome to fix > them if you'd like ;-). Send email to gnome@freebsd.org if you have some > patches. > > Joe Clarke To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12: 3:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from list-3.sw.ericsson.se (www.ericsson.com [193.180.17.140]) by hub.freebsd.org (Postfix) with SMTP id CF54C37B403 for ; Mon, 18 Jun 2001 12:03:10 -0700 (PDT) (envelope-from go5612gwe@arabia.com) Received: (qmail 2777 invoked from network); 18 Jun 2001 19:03:38 -0000 Received: from webportal03.sw.ericsson.se (153.88.240.64) by list-3.sw.ericsson.se with SMTP; 18 Jun 2001 19:03:38 -0000 Received: (qmail 1713 invoked by uid 41548); 18 Jun 2001 19:02:53 -0000 Date: 18 Jun 2001 19:02:53 -0000 Message-ID: <20010618190253.1712.qmail@webportal03.sw.ericsson.se> To: freebsd-questions@freebsd.org, freedom@sure.net, freespecial@cybervalue.com, frelinghuysen@mail.house.gov, french@mdsg.org, From: go5612gwe@arabia.com () Subject: WHY NOT TRY IT? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jag anm舁er mig till Communication Winter Party (go5612gwe@arabia.com) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12: 3:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from antares.gecadsoftware.com (antares.gecadsoftware.com [193.230.167.76]) by hub.freebsd.org (Postfix) with SMTP id 099C537B401 for ; Mon, 18 Jun 2001 12:03:10 -0700 (PDT) (envelope-from teo@gecadsoftware.com) Received: (qmail 66112 invoked from network); 18 Jun 2001 19:03:36 -0000 Received: from unknown (HELO taz.gecadsoftware.com) (193.230.245.17) by antares.gecadsoftware.com with SMTP; 18 Jun 2001 19:03:35 -0000 Received: from teo.gecadsoftware.com ([193.230.245.169]) by taz.gecadsoftware.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id NAYS9JW9; Mon, 18 Jun 2001 22:00:39 +0300 Received: (qmail 9712 invoked by uid 500); 18 Jun 2001 19:00:31 -0000 Date: Mon, 18 Jun 2001 22:00:31 +0300 From: teo@gecadsoftware.com To: Subject: Re: Undelete? Message-ID: <20010618220031.A9614@gecadsoftware.com> Reply-To: teo@gecadsoftware.com References: <000c01c0f818$a2c077c0$a3d70880@darkstar> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: ; from andy@tecc.co.uk on Mon, Jun 18, 2001 at 06:37:32PM +0100 Organization: GeCAD Software Comment: Worry less, RAV is watching! X-Operating-System: Linux 2.2.16 i686 up 2 days, 1:06 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Andy! On Mon, 18 Jun 2001, Andy [Tecc Nops] wrote: > Yes, you can undelete by getting out ur last backup > and copying from there. You do backup right? If not, > no undelete I'm afraid ;) > > btw, if you don't backup now I bet you will in future... > that's how I came to do my first "man dump" ;) > Hmm, in Linux there is some "undelete" functionality in mc (Midnight Commander) which analises the latest freed inodes or such, and if you don't have a busy server you still have some chances to get your files back (I did that twice). Isn't something similar possible on UFS/FFS? -- teodor To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12:10: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from prima-exc01.cidadei.com.br (a200042033005.rev.prima.com.ar [200.42.33.5]) by hub.freebsd.org (Postfix) with ESMTP id 03D5037B407 for ; Mon, 18 Jun 2001 12:09:49 -0700 (PDT) (envelope-from pinheiro@cidadei.com.br) Received: by prima-exc01.cidadei.com.br with Internet Mail Service (5.5.2653.19) id ; Mon, 18 Jun 2001 16:07:55 -0300 Message-ID: <9CF6FAED416EA043A968ED643E137195FFDCF8@prima-exc01.cidadei.com.br> From: Christian Pinheiro To: 'Bill Moran' Cc: Mario Doria , FreeBSD Questions Subject: RES: What pop3 server to use? Date: Mon, 18 Jun 2001 16:07:55 -0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What do you guys think about QMAIL with VPOPmail? ________________________________ Christian Pinheiro Gerente de Tecnologia Cidade Internet - Grupo CLARIN cpinheiro@cidadei.com.br ICQ # 119499360 Tel: +55 11 3365 2635 -----Mensagem original----- De: Bill Moran [mailto:wmoran@iowna.com] Enviada em: quinta-feira, 14 de junho de 2001 19:02 Cc: Mario Doria; FreeBSD Questions Assunto: Re: What pop3 server to use? Alex Charalabidis wrote: > > On Thu, 14 Jun 2001, Mario Doria wrote: > > > Hello, > > > > To those running a busy pop3 server, and also to those who have had previous > > experiences, which one do you recommend for running in FreeBSD? I plan on > > using postfix. > > > Depends whether you'll be using Maildir or mbox format. If it's mbox, use > Cucipop, no question about it. Qpopper is probably more suitable for > Maildir. Personally, I think it depeneds on a number of things, especially considering you may not have decided on Maildir/mbox yet. qpopper workes very well with sendmail on the other side. If you want to use Maildir, the qmail suite is probably best. If you'll be creating Unix users on that machine anyway, the sendmail/qpopper solution is pretty darn brainless to institute. But if you don't want a Unix user for each mailbox, qmail with the virtual users addon would probably be the easiest admin path. -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12:25:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 7EF9F37B403 for ; Mon, 18 Jun 2001 12:25:18 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5IJLws16999; Mon, 18 Jun 2001 15:21:59 -0400 (EDT) Message-ID: <3B2E5568.11841CA5@iowna.com> Date: Mon, 18 Jun 2001 15:24:24 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Christian Pinheiro Cc: FreeBSD Questions Subject: Re: RES: What pop3 server to use? References: <9CF6FAED416EA043A968ED643E137195FFDCF8@prima-exc01.cidadei.com.br> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Christian Pinheiro wrote: > > What do you guys think about QMAIL with VPOPmail? I use it on the busiest server I admin. I think qmail/vpopmail is confusing to configure, but once it's set up it's easy to manage. It also runs very reliably, I've never had any trouble with it. I've been meaning to upgrade this server to doing IMAP, as well as integrate some secure web-based management tools (everyone wants to manage through a web browser these days) but simply haven't gotten around to it yet. -Bill > -----Mensagem original----- > De: Bill Moran [mailto:wmoran@iowna.com] > Enviada em: quinta-feira, 14 de junho de 2001 19:02 > Cc: Mario Doria; FreeBSD Questions > Assunto: Re: What pop3 server to use? > > Alex Charalabidis wrote: > > > > On Thu, 14 Jun 2001, Mario Doria wrote: > > > > > Hello, > > > > > > To those running a busy pop3 server, and also to those who have had > previous > > > experiences, which one do you recommend for running in FreeBSD? I plan > on > > > using postfix. > > > > > Depends whether you'll be using Maildir or mbox format. If it's mbox, use > > Cucipop, no question about it. Qpopper is probably more suitable for > > Maildir. > > Personally, I think it depeneds on a number of things, especially > considering you may not have decided on Maildir/mbox yet. > qpopper workes very well with sendmail on the other side. > If you want to use Maildir, the qmail suite is probably best. > If you'll be creating Unix users on that machine anyway, the > sendmail/qpopper solution is pretty darn brainless to institute. > But if you don't want a Unix user for each mailbox, qmail with the > virtual users addon would probably be the easiest admin path. > > -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12:25:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.urx.com (mail.urx.com [63.170.19.36]) by hub.freebsd.org (Postfix) with ESMTP id 3D27237B401 for ; Mon, 18 Jun 2001 12:25:52 -0700 (PDT) (envelope-from kstewart@urx.com) Received: from urx.com [206.159.132.160] by mail.urx.com with ESMTP (SMTPD32-6.06) id A5BE1A001AA; Mon, 18 Jun 2001 12:25:50 -0700 Message-ID: <3B2E55BE.2350508C@urx.com> Date: Mon, 18 Jun 2001 12:25:50 -0700 From: Kent Stewart Reply-To: kstewart@urx.com Organization: Dynacom X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: Alex Kwan Cc: freebsd-questions Subject: Re: /etc/defaults/rc.conf was broken, how to fix it? References: <001101c0f7e8$9b2a7c20$971d40ca@alexkwan> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Alex Kwan wrote: > > Hi! > > After the /etc/defaults/rc.conf was broken, I can't > restart the system normally, also can't repair this file > (the system complain it is a read-only file), how to fix it? You are probably being stuck in single user mode and need to do a "mount -a". How was it broken? You shouldn't be modifying it any way. If you were editing it, you can get the original from /usr/src/etc/defaults/rc.conf. Then you should be able to copy the original or edit your current one and make it work. Kent > > Alex > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://kstewart.urx.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12:27: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from darkstar.umd.edu (darkstar.umd.edu [128.8.215.163]) by hub.freebsd.org (Postfix) with ESMTP id 2340237B403; Mon, 18 Jun 2001 12:27:03 -0700 (PDT) (envelope-from bfoz@glue.umd.edu) Received: from glue.umd.edu (localhost [127.0.0.1]) by darkstar.umd.edu (8.11.3/8.11.3) with ESMTP id f5IJR2d00361; Mon, 18 Jun 2001 15:27:02 -0400 (EDT) (envelope-from bfoz@glue.umd.edu) Message-ID: <3B2E5606.2CB643C7@glue.umd.edu> Date: Mon, 18 Jun 2001 15:27:02 -0400 From: Brandon Fosdick X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Ruslan Ermilov Cc: questions@FreeBSD.ORG Subject: Re: Undelete? References: <000c01c0f818$a2c077c0$a3d70880@darkstar> <20010618203507.H29910@sunbay.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ruslan Ermilov wrote: > > On Mon, Jun 18, 2001 at 01:03:45PM -0400, Brandon Fosdick wrote: > > > > Is there any sort of undelete function? One single typo and I deleted > > the wrong directory. Next time I won't make directory names that are > > so close together. > > > Yes, it's called dump(8) and restore(8). :) You see, the funny thing is that I was just about to do that. I said, "I'll do it in a minute, but first I'll just take care of this one thing...". Famous last words I guess. Anyway, its no big deal, I just lost a lot of video that I think is still on the tape. I was wondering if there was anything that would save me from having to re-edit the tape. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 12:30: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.scana.com (falcon.scana.com [161.156.101.7]) by hub.freebsd.org (Postfix) with ESMTP id D901E37B406 for ; Mon, 18 Jun 2001 12:30:02 -0700 (PDT) (envelope-from MSILVER@scana.com) Received: by falcon.scana.com; id PAA04513; Mon, 18 Jun 2001 15:30:00 -0400 (EDT) Received: from maildmis.scana.com(161.156.252.90) by falcon.scana.com via smap (V5.5) id xma004309; Mon, 18 Jun 01 15:29:36 -0400 Received: by maildmis.scana.com with Internet Mail Service (5.5.2653.19) id ; Mon, 18 Jun 2001 15:29:35 -0400 Message-ID: From: "SILVER, MICHAEL A" To: "'Christian Pinheiro'" Cc: "'FreeBSD Questions'" Subject: RE: What pop3 server to use? Date: Mon, 18 Jun 2001 15:29:34 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Very happy with it. It is very reliable. There are also some good web sites that detail setting it on FreeBSD. There are also a ton of add ons such as web mail, web admin, IMAP, mySQL connections, etc. ...Michael... -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Christian Pinheiro Sent: Monday, June 18, 2001 3:08 PM To: 'Bill Moran' Cc: Mario Doria; FreeBSD Questions Subject: RES: What pop3 server to use? What do you guys think about QMAIL with VPOPmail? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13: 2:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from postal.ece.ubc.ca (postal.ece.ubc.ca [137.82.52.241]) by hub.freebsd.org (Postfix) with ESMTP id 54F5637B403 for ; Mon, 18 Jun 2001 13:02:14 -0700 (PDT) (envelope-from shailesh@ece.ubc.ca) Received: from shannon.ece.ubc.ca (shannon.ece.ubc.ca [137.82.57.192]) by postal.ece.ubc.ca (Postfix) with ESMTP id EF758ECB4 for ; Mon, 18 Jun 2001 13:01:24 -0700 (PDT) Received: from localhost by shannon.ece.ubc.ca (8.8.5/SMI-4.0) id MAA12295; Mon, 18 Jun 2001 12:55:30 -0700 (PDT) Date: Mon, 18 Jun 2001 12:55:30 -0700 (PDT) From: shailesh sheoran Cc: FreeBSD-Questions Subject: d-link 530TX + cards still dysfunctional In-Reply-To: <032401c0f5d4$dd015da0$3200000a@Intranet> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi, i am trying to setup 2 dlink dfe530tx+ cards on my PIII 750MHz freebsd 4.3 Release system. despite all efforts I still can't get them working. i have tried looking for information everywhere but the standard procedure of adding the lines device miibus device rl isn't working for me. I know the card is not damaged because i can access internet from windows98 but Freebsd still can't get the card working. i am sure it should use the realtek 8139 driver because that's the driver that came with the card too. (but there is no FreeBSD version of it on the floppy, only linux and windows) Following is the output i get from dmesg: ------------------------------------------------------------------------- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #13: Mon Jun 18 12:34:08 PDT 2001 root@:/usr/src/sys/compile/MKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (757.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff real memory = 134131712 (130988K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 126275584 (123316K bytes) APreloaded elf kernel "kernel" at 0xc043c000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc043c09c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcib2: at device 30.0 on pci0 pci2: on pcib2 pcm0: port 0xd800-0xd83f irq 9 at device 11.0 on pci2 **************************DLINK DFE 530TX+ CARDS********************** pci2: (vendor=0x1186, dev=0x1300) at 12.0 irq 9 pci2: (vendor=0x1186, dev=0x1300) at 13.0 irq 9 ********************************************************************** isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xb400-0xb41f irq 5 at device 31.2 on pci0 uhci0: (New UHCI DeviceId=0x24428086) usb0: on uhci0 usb0: USB revision 1.0 uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: (vendor=0x8086, dev=0x2443) at 31.3 irq 10 uhci1: port 0xb000-0xb01f irq 9 at device 31.4 on pci0 uhci1: (New UHCI DeviceId=0x24448086) usb1: on uhci1 usb1: USB revision 1.0 uhub1: (0x24448086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: 19546MB [39714/16/63] at ata0-master UDMA100 acd0: DVD-ROM at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted ------------------------------------------------------------------------ I have a few points of confusion also. Hopefully someone could enlighten me. 1. In file /usr/src/sys/i386/conf/LINT , it says "include files 'device miibus0' in kernel configuration for mii devices to work" Is that same as the line "device miibus" in GENERIC/MKERNEL ? 2. Do i need to tamper with BIOS PNP settings? 3. Do i need to add something to the /boot/kernel.conf file? Could someone please please help me out. Thanks, Shailesh Sheoran M.ASc. Department of Electrical Engineering University of British Columbia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13: 9: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from thehousleys.net (frenchknot.ne.mediaone.net [24.147.224.201]) by hub.freebsd.org (Postfix) with ESMTP id E42BA37B401 for ; Mon, 18 Jun 2001 13:09:02 -0700 (PDT) (envelope-from jim@thehousleys.net) Received: (from root@localhost) by thehousleys.net (8.11.3/8.11.2) id f5IK91s51428; Mon, 18 Jun 2001 16:09:01 -0400 (EDT) (envelope-from jim@thehousleys.net) Received: from thehousleys.net (baby.int.thehousleys.net [192.168.0.24]) (authenticated) by thehousleys.net (8.11.3/8.11.3) with ESMTP id f5IK8xr51420; Mon, 18 Jun 2001 16:08:59 -0400 (EDT) (envelope-from jim@thehousleys.net) Message-ID: <3B2E5FDB.B0EF367D@thehousleys.net> Date: Mon, 18 Jun 2001 16:08:59 -0400 From: James Housley X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: shailesh sheoran Cc: FreeBSD-Questions Subject: Re: d-link 530TX + cards still dysfunctional References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: by AMaViS perl-10 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG shailesh sheoran wrote: > > hi, > i am trying to setup 2 dlink dfe530tx+ cards on my PIII > 750MHz freebsd 4.3 Release system. > despite all efforts I still can't get them working. i have tried > looking for information everywhere but > the standard procedure of adding the lines > device miibus > device rl > isn't working for me. I know the card is not damaged because i can access > internet from windows98 but Freebsd still can't get the card working. You don't state if you have PNP enabled in the BIOS. You have to make sure the BIOS is set for Non-PNP OS. Jim -- /"\ ASCII Ribbon Campaign . \ / - NO HTML/RTF in e-mail . X - NO Word docs in e-mail . / \ ----------------------------------------------------------------- jeh@FreeBSD.org http://www.FreeBSD.org The Power to Serve jim@TheHousleys.Net http://www.TheHousleys.net --------------------------------------------------------------------- In theory there is no difference between theory and practice. In practice there is no similarity. -- From the "I wish I'd said that" archives. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:14:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts5-srv.bellnexxia.net (tomts5.bellnexxia.net [209.226.175.25]) by hub.freebsd.org (Postfix) with ESMTP id E555C37B401 for ; Mon, 18 Jun 2001 13:14:05 -0700 (PDT) (envelope-from david@skytrackercanada.com) Received: from d.tracker ([65.92.120.147]) by tomts5-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010618201405.WFRM17517.tomts5-srv.bellnexxia.net@d.tracker>; Mon, 18 Jun 2001 16:14:05 -0400 Received: (from david@localhost) by d.tracker (8.11.3/8.11.3) id f5ILDxX14712; Mon, 18 Jun 2001 21:13:59 GMT (envelope-from david) Date: Mon, 18 Jun 2001 21:13:59 GMT From: David Banning Message-Id: <200106182113.f5ILDxX14712@d.tracker> To: david@skytrackercanada.com, drewt@writeme.com, questions@freebsd.org Subject: RE: which java is basic runtime package In-Reply-To: <5CD46247635BD511B6B100A0CC3F0239259FA4@ldcmsx01.lc.ca.gov> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG OK - thanks - To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:14:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from c0mailgw11.prontomail.com (mailgw.prontomail.com [216.163.180.10]) by hub.freebsd.org (Postfix) with ESMTP id C08E337B403 for ; Mon, 18 Jun 2001 13:14:49 -0700 (PDT) (envelope-from jltaylor@metrotel.net) Received: by c0mailgw11.prontomail.com (NPlex 5.1.050) id 3B2B2FD60004E832 for Questions@FreeBSD.ORG; Mon, 18 Jun 2001 13:10:47 -0700 Received: from 148.75.160.174 by SmtpServer for ; Mon, 18 Jun 2001 20:10:42 +0000 Message-ID: <002401c0f832$b43688e0$aea04b94@FRONT1> Reply-To: "James Taylor" From: "James Taylor" To: Subject: load balancing Date: Mon, 18 Jun 2001 15:10:10 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0021_01C0F808.C434DF00" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0021_01C0F808.C434DF00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Load balancing w/FreeBSD. I keep reading, but never see a really good answer to this. Two Internet feeds (dls/cable) on ethernet. One FreeBSD box running: natd named squid transparent proxy ipfw dummynet Does the Linux multipath thing work with FreeBSD? I've seen the even/odd IP number idea - odd IP's go to interface1, even = IP's go to interface2. Gated? Zebra? balance? If I can't really "load balance" can I somehow tell squid to alternate = requests from each Internet port? Thanks, James Taylor jltaylor@metrotel.net ------=_NextPart_000_0021_01C0F808.C434DF00 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Load balancing w/FreeBSD.
 
I keep reading, but never see a really = good answer=20 to this.
 
Two Internet feeds (dls/cable) on=20 ethernet.
 
One FreeBSD box running:
 
natd
named
squid
transparent proxy
ipfw
dummynet
 
 
Does the Linux multipath thing work = with=20 FreeBSD?
 
I've seen the even/odd IP number idea - = odd IP's go=20 to interface1, even IP's go to interface2.
 
Gated?
 
Zebra?
 
balance?
 
If I can't really "load balance" can I = somehow tell=20 squid to alternate requests from each Internet port?
 
 
Thanks,
 
James Taylor
jltaylor@metrotel.net
 
 
------=_NextPart_000_0021_01C0F808.C434DF00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:15:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heorot.1nova.com (heorot.1nova.com [63.105.24.23]) by hub.freebsd.org (Postfix) with ESMTP id 3F0A537B403 for ; Mon, 18 Jun 2001 13:15:39 -0700 (PDT) (envelope-from hamellr@1nova.com) Received: by heorot.1nova.com (Postfix, from userid 1000) id 9150418D9; Mon, 18 Jun 2001 13:15:03 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by heorot.1nova.com (Postfix) with ESMTP id 888D518D8; Mon, 18 Jun 2001 13:15:03 -0700 (PDT) Date: Mon, 18 Jun 2001 13:15:03 -0700 (PDT) From: Rick Hamell To: Jonathan Slivko Cc: questions@freebsd.org Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: <200106181134.AA136839294@stmail.pace.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Does anyone know what models of digital cameras are supported > under the FreeBSD 4.3-STABLE operating system? I am looking for > one in the $200-$250 range. TIA! Sony Mavica FD-73... pull the floppy disk out, mount it copy the .jpgs over, unmount it, take more pictures. :) Rick ******************************************************************* Rick's FreeBSD Web page http://heorot.1nova.com/freebsd Ace Logan's Hardware Guide http://www.shatteredcrystal.net/hardware ***FreeBSD - The Power to Serve! http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:41:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from c0mailgw07.prontomail.com (mailgw.prontomail.com [216.163.180.10]) by hub.freebsd.org (Postfix) with ESMTP id 52FA237B411 for ; Mon, 18 Jun 2001 13:41:34 -0700 (PDT) (envelope-from jltaylor@metrotel.net) Received: by c0mailgw07.prontomail.com (NPlex 5.5.015.3) id 3B2B4F6A0004B1C6 for freebsd-questions@FreeBSD.ORG; Mon, 18 Jun 2001 13:37:15 -0700 Received: from 148.75.160.174 by SmtpServer for ; Mon, 18 Jun 2001 20:37:11 +0000 Message-ID: <003c01c0f836$6774bc80$aea04b94@FRONT1> Reply-To: "James Taylor" From: "James Taylor" To: Subject: natd redirect_address again Date: Mon, 18 Jun 2001 15:36:40 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0037_01C0F80C.78241320" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0037_01C0F80C.78241320 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have successfully (well not totally) caused natd to be started from a = config file and I use: redirect_address 192.168.0.250 4.55.88.xx=20 it starts without error. natd works - traffic goes in and out just like it should. redirected address doesn't I have aliased 4.55.88.xx to my gateway interface, so it is "there" = before natd starts. I can see 4.55.88.xx when I type "ifconfig". I can ping 4.55.88.xx from the outside world. I can't access anything on the private IP(192.168.0.250) side from the = public side. I can access 192.168.0.250 from the private network. Generally, I am running: 4.2 FreeBSD natd named sendmail ipfw dummynet squid transparent proxy Everything works great - except the "redirect_address". RTFM, printed it, RTFM, shutdown, reboot, RTFM, tried it without the = config file (command line), shutdown, reboot, RTFM... Everybody says: "...it shoudl work!..." I must be doing something wrong. Any ideas? Thanks, James Taylor jltaylor@metrotel.net a wireless ISP in the middle of nowhere - Texarkana, Texas ------=_NextPart_000_0037_01C0F80C.78241320 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I have successfully (well not totally) = caused natd=20 to be started from a config file and I use:
 
redirect_address 192.168.0.250 = 4.55.88.xx=20
 
it starts without error.
 
natd works - traffic goes in and out = just like it=20 should.
 
redirected address doesn't
 
I have aliased 4.55.88.xx to my gateway = interface,=20 so it is "there" before natd starts.
I can see 4.55.88.xx when I type=20 "ifconfig".
I can ping 4.55.88.xx from the outside=20 world.
I can't access anything on the private=20 IP(192.168.0.250) side from the public side.
I can access 192.168.0.250 from the = private=20 network.
 
 
Generally, I am running:
 
4.2 FreeBSD
natd
named
sendmail
ipfw
dummynet
squid
transparent proxy
 
Everything works great - except the=20 "redirect_address".
RTFM, printed it, RTFM, shutdown, = reboot, RTFM,=20 tried it without the config file (command line), shutdown, reboot,=20 RTFM...
Everybody says: "...it shoudl=20 work!..."
I must be doing something wrong.  = Any=20 ideas?
 
Thanks,
 
James Taylor
jltaylor@metrotel.net
a wireless ISP in the middle of nowhere = -=20 Texarkana, Texas
 
 
 
 
------=_NextPart_000_0037_01C0F80C.78241320-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:49:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from trap.geckobot.com (mail.geckobot.com [64.81.103.90]) by hub.freebsd.org (Postfix) with ESMTP id 8D6F337B403 for ; Mon, 18 Jun 2001 13:49:36 -0700 (PDT) (envelope-from rick@geckobot.com) Received: from trap.geckobot.com (trap.geckobot.com [192.168.254.254]) by trap.geckobot.com (8.11.3/8.9.3) with SMTP id f5IKiN417996 for ; Mon, 18 Jun 2001 13:44:24 -0700 (MST) (envelope-from rick@geckobot.com) Content-Type: text/plain; charset="iso-8859-1" From: Rick Reply-To: rick@geckobot.com Organization: geckobot To: freebsd-questions@FreeBSD.ORG Subject: Significant Performance Drop during 4.0-4.3 Upgrade Date: Mon, 18 Jun 2001 13:44:23 -0700 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <01061813442301.17965@trap.geckobot.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using sysinstall, and I noticed that some rm -r operations seemed a little slow after the upgrade. Coincidentally I've been working on an ISAM alternative to B-tree so I have a bunch of performance benchmarks handy. The results: Disk hits are *much* slower after the upgrade. Many times slower, in fact. I also had Berkley DB benchmarks that I was using for comparison and they too were heavily impacted. For the life of me, I can't figure out what the heck happened! SOFTUPDATES were off before the upgrade and I didn't change of the disk tuning. I did tweak my kernel a bit, but nothing should have had this effect-- I just removed a few things that weren't being used like EISA and some network cards. When I examine dmesg everything still seems to be recognized as ULTRA DMA, etc. I've tried putting everything back in my kernel and I've try the GENERIC kernel with no improvements. I've looked through the release notes, etc., and couldn't find anythingd etailing this problem. Did I miss something? Am I just extra lucky? Thanks in advance, Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:55: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 645FC37B401 for ; Mon, 18 Jun 2001 13:55:00 -0700 (PDT) (envelope-from nick@rogness.net) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id f5IMGkQ92666; Mon, 18 Jun 2001 17:16:46 -0500 (CDT) (envelope-from nick@rogness.net) Date: Mon, 18 Jun 2001 17:16:45 -0500 (CDT) From: Nick Rogness X-Sender: nick@cody.jharris.com To: James Taylor Cc: freebsd-questions@FreeBSD.ORG Subject: Re: natd redirect_address again In-Reply-To: <003c01c0f836$6774bc80$aea04b94@FRONT1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, James Taylor wrote: > I have successfully (well not totally) caused natd to be started from > a config file and I use: > > redirect_address 192.168.0.250 4.55.88.xx > > it starts without error. > > natd works - traffic goes in and out just like it should. > > redirected address doesn't > > I have aliased 4.55.88.xx to my gateway interface, so it is "there" > before natd starts. > I can see 4.55.88.xx when I type "ifconfig". > I can ping 4.55.88.xx from the outside world. > I can't access anything on the private IP(192.168.0.250) side from the > public side. > I can access 192.168.0.250 from the private network. Here are some questions that need answering: 1) How is the outside interface connected? Ethernet, DSL? 2) What is the output of `ipfw -a l` ? 3) What other options are you using with natd? 4) What is the output of `netstat -rn`? 5) Have you tried running natd with the 'log' options to log xlate packets? If so, send the log [just a small sniplet]. 6) Is the 4.55.88.xx network being routed to you OR is it a directly connected network? Nick Rogness - Keep on Routing in a Free World... "FreeBSD: The Power to Serve!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 13:57:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from karon.dynas.se (karon.dynas.se [192.71.43.4]) by hub.freebsd.org (Postfix) with SMTP id AF92937B403 for ; Mon, 18 Jun 2001 13:57:29 -0700 (PDT) (envelope-from mikko@dynas.se) Received: (qmail 94718 invoked from network); 18 Jun 2001 20:57:27 -0000 Received: from spirit.sto.dynas.se (HELO spirit.dynas.se) (172.16.1.10) by 172.16.1.1 with SMTP; 18 Jun 2001 20:57:27 -0000 Received: (qmail 26829 invoked from network); 18 Jun 2001 20:55:00 -0000 Received: from explorer.rsa.com (10.81.217.59) by spirit.dynas.se with SMTP; 18 Jun 2001 20:55:00 -0000 Received: (from mikko@localhost) by explorer.rsa.com (8.11.3/8.11.3) id f5IKvKJ52985; Mon, 18 Jun 2001 13:57:20 -0700 (PDT) (envelope-from mikko) Date: Mon, 18 Jun 2001 13:57:20 -0700 (PDT) From: Mikko Tyolajarvi Message-Id: <200106182057.f5IKvKJ52985@explorer.rsa.com> To: jcm@FreeBSD-uk.eu.org Cc: questions@freebsd.org Subject: Re: change word or repeat operation in emacs? Newsgroups: local.freebsd.questions References: <20010618181631.A42271@dogma.freebsd-uk.eu.org> X-Newsreader: NN version 6.5.6 (NOV) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In local.freebsd.questions you write: >I'm still getting used to emacs, and overall i love it. But here are a few >commands i loved in vi that i haven't yet discovered emacs analogues for. >I will often use 'cw' in vi to change a word (usually a variable name, >constant, etc) and then go to another word i want to change as well. In vi >i can just use '.' to do this. Is there a similar way to 'change-word' then >'repeat-operation' in emacs, besides search-and-replace'? Not exactly, but there are "keyboard macros". C-x-( to begin, do some operations, including searching, C-x-) to end, and C-x-e to execute the same operations again. C-u NNN C-x-e to run the macro NNN times. There's more to it, see C-h-a "macro". $02, /Mikko P.S. This was not really a FreeBSD question, was it? ;-) -- Mikko Tyl臻舐vi_______________________________________mikko@rsasecurity.com RSA Security To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14: 2:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ruby.he.net (ruby.he.net [216.218.187.2]) by hub.freebsd.org (Postfix) with ESMTP id 22C6F37B401 for ; Mon, 18 Jun 2001 14:02:36 -0700 (PDT) (envelope-from bill@wiliweld.com) Received: from corten8.billschoolcraft.com (adsl-63-193-247-201.dsl.snfc21.pacbell.net [63.193.247.201]) by ruby.he.net (8.8.6/8.8.2) with ESMTP id OAA01738; Mon, 18 Jun 2001 14:02:36 -0700 Date: Mon, 18 Jun 2001 14:02:21 -0700 (PDT) From: Bill Schoolcraft X-Sender: bill@corten8.billschoolcraft.com To: Rick Hamell Cc: Jonathan Slivko , questions@FreeBSD.ORG Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: Message-ID: System-ID: [en] (I; Linux 2.2.17-21mdk i86pc) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At Mon, 18 Jun 2001 it looks like Rick Hamell composed: RH--> Sony Mavica FD-73... pull the floppy disk out, mount it copy the RH-->.jpgs over, unmount it, take more pictures. :) RH--> RH--> Rick RH--> ..... Thanks Rick, do you by chance have the mounting procedures for the "CompactFlash" PCMCIA card holder on your site, I went through alot of your links and failed to find it, thanks. -- Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life." _\_v http://forwardslashunix.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14: 5: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nothing-going-on.demon.co.uk (pc-62-31-42-140-hy.blueyonder.co.uk [62.31.42.140]) by hub.freebsd.org (Postfix) with ESMTP id D93D537B401 for ; Mon, 18 Jun 2001 14:04:56 -0700 (PDT) (envelope-from nik@nothing-going-on.demon.co.uk) Received: (from nik@localhost) by nothing-going-on.demon.co.uk (8.11.3/8.11.3) id f5IKtI139689 for questions@freebsd.org; Mon, 18 Jun 2001 21:55:18 +0100 (BST) (envelope-from nik) Date: Mon, 18 Jun 2001 21:52:02 +0100 From: Nik Clayton To: stable@freebsd.org Subject: Recent FAQ changes Message-ID: <20010618215202.A39618@clan.nothing-going-on.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="5vNYLRcllDrimb99" Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: FreeBSD Project Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --5vNYLRcllDrimb99 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable [ Apologies for the hiatus in this service -- work has intervened at=20 inopportune times ] FreeBSD FAQ Updates The following changes have been made to the FreeBSD FAQ since 2001-5-14: Added questions: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Why doesn't SSH authentication through .shosts work by default in=20 recent versions of FreeBSD? http://www.FreeBSD.org/FAQ/book.html#SSH-SHOSTS Questions that have changed: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D What is the FreeBSD-STABLE concept? http://www.FreeBSD.org/FAQ/book.html#STABLE Where can I get Motif for FreeBSD? http://www.FreeBSD.org/FAQ/book.html#MOTIF This is a weekly service. Updates will be posted to the FreeBSD -questio= ns, -stable, and -newbies mailing lists sometime every Monday. As always, you can read the complete FAQ at http://www.freebsd.org/FAQ/ --=20 FreeBSD: The Power to Serve http://www.freebsd.org/ FreeBSD Documentation Project http://www.freebsd.org/docproj/ --- 15B8 3FFC DDB4 34B0 AA5F 94B7 93A8 0764 2C37 E375 --- --5vNYLRcllDrimb99 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjsuafEACgkQk6gHZCw343Ve6wCdErX11GwpAtln7maCLPZtBaic DnUAn0lGdLCNqwZja3lr0EXMY+skaAkS =gm6s -----END PGP SIGNATURE----- --5vNYLRcllDrimb99-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14: 8:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from maile.telia.com (maile.telia.com [194.22.190.16]) by hub.freebsd.org (Postfix) with ESMTP id 5ABDB37B403 for ; Mon, 18 Jun 2001 14:08:07 -0700 (PDT) (envelope-from ertr1013@student.uu.se) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by maile.telia.com (8.11.2/8.11.0) with ESMTP id f5IL85802966 for ; Mon, 18 Jun 2001 23:08:05 +0200 (CEST) Received: from ertr1013.student.uu.se (h185n2fls20o913.telia.com [212.181.163.185]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id XAA06598 for ; Mon, 18 Jun 2001 23:08:04 +0200 (CEST) Received: (qmail 44681 invoked by uid 1001); 18 Jun 2001 21:07:36 -0000 Date: Mon, 18 Jun 2001 23:07:36 +0200 From: Erik Trulsson To: Rick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Significant Performance Drop during 4.0-4.3 Upgrade Message-ID: <20010618230736.A44631@student.uu.se> Mail-Followup-To: Rick , freebsd-questions@FreeBSD.ORG References: <01061813442301.17965@trap.geckobot.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <01061813442301.17965@trap.geckobot.com> User-Agent: Mutt/1.3.19i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Jun 18, 2001 at 01:44:23PM -0700, Rick wrote: > Hi! > > I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using sysinstall, and I > noticed that some rm -r operations seemed a little slow after the upgrade. > > Coincidentally I've been working on an ISAM alternative to B-tree so I have a > bunch of performance benchmarks handy. The results: > > Disk hits are *much* slower after the upgrade. Many times slower, in fact. > I also had Berkley DB benchmarks that I was using for comparison and they too > were heavily impacted. > > For the life of me, I can't figure out what the heck happened! SOFTUPDATES > were off before the upgrade and I didn't change of the disk tuning. I did > tweak my kernel a bit, but nothing should have had this effect-- I just > removed a few things that weren't being used like EISA and some network > cards. When I examine dmesg everything still seems to be recognized as ULTRA > DMA, etc. I've tried putting everything back in my kernel and I've try the > GENERIC kernel with no improvements. > > I've looked through the release notes, etc., and couldn't find anythingd > etailing this problem. Did I miss something? Am I just extra lucky? Yes, you missed one small thing. Write caching for IDE disks were turned off by default in 4.3-RELEASE. It has since been turned back on in 4.3-STABLE on since the performance hit was too big. (The reason it was turned off is that if you have the write-cache turned on can result in serious data-loss if you have a power failure.) You can turn it back on by setting hw.ata.wc=1 from the loader. See the manpages for ata(4) and loader(8) for more information. -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:10:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heorot.1nova.com (heorot.1nova.com [63.105.24.23]) by hub.freebsd.org (Postfix) with ESMTP id 1C70337B401 for ; Mon, 18 Jun 2001 14:10:10 -0700 (PDT) (envelope-from hamellr@1nova.com) Received: by heorot.1nova.com (Postfix, from userid 1000) id 1AE8318D9; Mon, 18 Jun 2001 14:09:54 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by heorot.1nova.com (Postfix) with ESMTP id 1221018D8; Mon, 18 Jun 2001 14:09:54 -0700 (PDT) Date: Mon, 18 Jun 2001 14:09:53 -0700 (PDT) From: Rick Hamell To: Bill Schoolcraft Cc: questions@FreeBSD.ORG Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > RH--> Sony Mavica FD-73... pull the floppy disk out, mount it copy the > RH-->.jpgs over, unmount it, take more pictures. :) > RH--> > RH--> Rick > RH--> > > ..... Thanks Rick, do you by chance have the mounting procedures > for the "CompactFlash" PCMCIA card holder on your site, I went > through alot of your links and failed to find it, thanks. Nope... sorry.. I've only used the floppy disk models. :( I think I saw something about this in the last couple of days though. Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:10:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id ADBBB37B403 for ; Mon, 18 Jun 2001 14:10:10 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 39570 invoked by uid 100); 18 Jun 2001 21:10:09 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15150.28209.824830.995938@guru.mired.org> Date: Mon, 18 Jun 2001 16:10:09 -0500 To: "Jonathan Slivko" Cc: questions@freebsd.org Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: <14890890@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jonathan Slivko types: > Does anyone know what models of digital cameras are supported > under the FreeBSD 4.3-STABLE operating system? I am looking for > one in the $200-$250 range. TIA! FreeBSD doesn't support cameras. What it does support are various I/O devices that cameras - or their memory cards - can be plugged into, and applications for moving the images across those devices, or possibly file systems for using them. Look in /usr/ports/graphics for applications for reading from cameras attached to serial ports, and possibly to USB ports as well, though I have no experience with those. The pkg-descr files for those ports should either list the cameras they support, or point you at a web site that will list them. You might also give /usr/ports/graphics/sane-backends, as it also supports some cameras. There are USB readers/writers available for both SmartMedia and CompactFlash that use the USB protocols supported by the umass device, so that you can read those cards like disks. That's a lot faster than using a serial line connected to the camera, but will cost a significant fraction of your budget for the reader/writer. Readers/writers for other formats may also exist. At least one USB-capable camera uses those protocols, and hence looks like a disk itself without having to move the memory card. FWIW, I've always liked the Olympus D series cameras, though I haven't looked at the D-100. They serial interface works with photopc, gphoto and camediaplay in the ports tree. They use Smart Media, which means you can read the cards on FreeBSD with a reader. I haven't gotten a chance to play with one with a USB interface, so I don't know how well that works. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:10:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from beta.goisc.com (outlook.goisc.com [192.188.146.6]) by hub.freebsd.org (Postfix) with ESMTP id C961137B401 for ; Mon, 18 Jun 2001 14:10:19 -0700 (PDT) (envelope-from dan@goisc.com) content-class: urn:content-classes:message Subject: make install fails Date: Mon, 18 Jun 2001 17:10:08 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-ID: <4C9992858583BE4282220DFCF0EF00D0BD53@beta.goisc.com> Disposition-Notification-To: "Dan Ouellet" X-MS-Has-Attach: X-MimeOLE: Produced By Microsoft Exchange V6.0.4417.0 X-MS-TNEF-Correlator: Thread-Topic: make install fails Thread-Index: AcD4OxMGkpot/4kySZic0BfcstsNfQ== From: "Dan Ouellet" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Last week I successfully configured and installed a custom kernel. =20 Today I tried to reconfigure my kernel and all seemed OK till I tried to "make install".=20 =20 The "config, make depend, make" sequence all went OK, without errors.=20 =20 However when I run "make install", I get the following error: =20 # make install chflags noschg /kernel chflags: /kernel: Operation not permitted *** Error code 1 (ignored) =20 mv /kernel /kernel.old =20 This also is an Operation not permitted. =20 Any idea on how to fix this problem? =20 Should you need additional information or a copy of my latest kernel config file, let me know and I will forward it. =20 Thank you in advance for your help in this matter, =20 Regards,=20 =20 Dan Ouellet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:13: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dc-mx08.cluster1.charter.net (dc-mx08.cluster0.hsacorp.net [209.225.8.18]) by hub.freebsd.org (Postfix) with ESMTP id BF96337B403 for ; Mon, 18 Jun 2001 14:12:58 -0700 (PDT) (envelope-from phbrown@charter.net) Received: from [63.151.74.116] (HELO charter.net) by dc-mx08.cluster1.charter.net (CommuniGate Pro SMTP 3.4.6) with ESMTP id 9245883 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 17:19:00 -0400 Message-ID: <3B2E6EBD.7E75B6FF@charter.net> Date: Mon, 18 Jun 2001 14:12:30 -0700 From: Parker Brown X-Mailer: Mozilla 4.75 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Tech Support Subject: BSD Internet Access Over CableTV Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've just retired my trusty 56K modem and opted for DSL-like speeds (256/64) and "always on" through Charter Communications, my local Cable TV company. Attachment is via UCB. My question is: before I go hacking through my configuration files, can someone tell me if support for that kind of Internet connection exists in BSD 4.3. Dmesg indicated that it located the Linksys UCB adaptor and labelled it ugen0. Will I need to get a special driver? Thanks Parker Brown To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:14:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web14005.mail.yahoo.com (web14005.mail.yahoo.com [216.136.175.121]) by hub.freebsd.org (Postfix) with SMTP id EA0AF37B408 for ; Mon, 18 Jun 2001 14:14:34 -0700 (PDT) (envelope-from john_p_mitchell@yahoo.com) Message-ID: <20010618211434.55025.qmail@web14005.mail.yahoo.com> Received: from [207.123.93.63] by web14005.mail.yahoo.com; Mon, 18 Jun 2001 14:14:34 PDT Date: Mon, 18 Jun 2001 14:14:34 -0700 (PDT) From: john mitchell Subject: problem installing x To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I recently got FreeBSD 4.3 installed on the 2nd hard drive of my Intel PC. After the install, I went back to install Xwindows from the package list on the CD. It seemed to allow me to install the X server and then KDE, but when I type startx at a shell prompt, it tells me it couldn't open the config file. Does this ring a bell with anyone? How can I remedy this? Thanks much, John M. __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:15:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 3742837B401 for ; Mon, 18 Jun 2001 14:15:27 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 39698 invoked by uid 100); 18 Jun 2001 21:15:26 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15150.28526.672962.532381@guru.mired.org> Date: Mon, 18 Jun 2001 16:15:26 -0500 To: j mckitrick Cc: questions@freebsd.org Subject: Re: change word or repeat operation in emacs? In-Reply-To: <77959675@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG j mckitrick types: > I'm still getting used to emacs, and overall i love it. But here are a few > commands i loved in vi that i haven't yet discovered emacs analogues for. > > I will often use 'cw' in vi to change a word (usually a variable name, > constant, etc) and then go to another word i want to change as well. In vi > i can just use '.' to do this. Is there a similar way to 'change-word' then > 'repeat-operation' in emacs, besides search-and-replace'? You want - maybe - "repeat-complex-command". That redoes the last command which used the minibuffer. Liable to be bound to C-x M-:. I seldom use it, though. If I've got to do something repeatedly, I use a keyboard macro. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:20:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.webmailer.de (natpost.webmailer.de [192.67.198.65]) by hub.freebsd.org (Postfix) with ESMTP id EE7BB37B406 for ; Mon, 18 Jun 2001 14:20:37 -0700 (PDT) (envelope-from koester@x-itec.de) Received: from localhost (pD904947B.dip.t-dialin.net [217.4.148.123]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id XAA25833 for ; Mon, 18 Jun 2001 23:20:33 +0200 (MET DST) Received: (qmail 3750 invoked from network); 18 Jun 2001 23:20:04 -0000 Received: from unknown (HELO computer.winclient.x-itec2.de) (192.168.0.1) by 192.168.0.99 with SMTP; 18 Jun 2001 23:20:04 -0000 Date: Mon, 18 Jun 2001 23:20:27 +0200 From: Boris X-Mailer: The Bat! (v1.51) Personal Reply-To: Boris X-Priority: 3 (Normal) Message-ID: <15311420962.20010618232027@x-itec.de> To: "Toomas Aas" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Export restrictions for Kerberos? In-Reply-To: <200106171948.f5HJmvO30279@lv.raad.tartu.ee> References: <200106171948.f5HJmvO30279@lv.raad.tartu.ee> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Toomas, Sunday, June 17, 2001, 9:48:45 PM, you wrote: TA> Is Kerberos still considered "too good" to be exported from TA> U.S.? If so, what alternatives do you recommend? DL Kerberos here: http://www.crypto-publish.org/ A tip: If I was you, I would not play with the kerberos 5 package, use the heimdal package. A general problem is, that the ftp server from kerberos 5 is version 5.60 for example, and the version from freebsd is 6.00, you have to exchange your services for kerberos - not what you might really want, who knows. -- Boris void SurfTo ( "http://www.x-itec.de "){ thanks(0);exit(0); } To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:23:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kineo.bowdoin.edu (kineo.bowdoin.edu [139.140.14.35]) by hub.freebsd.org (Postfix) with ESMTP id CCEB337B407 for ; Mon, 18 Jun 2001 14:23:41 -0700 (PDT) (envelope-from mcowger@bowdoin.edu) Received: from mcfly ([139.140.133.82]) by kineo.bowdoin.edu (Netscape Messaging Server 4.15) with SMTP id GF5A3B00.0OC; Mon, 18 Jun 2001 17:23:35 -0400 From: "Matthew K. Cowger" To: "Dan Ouellet" , Subject: RE: make install fails Date: Mon, 18 Jun 2001 17:24:59 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 In-Reply-To: <4C9992858583BE4282220DFCF0EF00D0BD53@beta.goisc.com> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a very common problem. CHange your kernel securelevel in rc.conf to -1. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Dan Ouellet Sent: Monday, June 18, 2001 5:10 PM To: freebsd-questions@FreeBSD.org Subject: make install fails Last week I successfully configured and installed a custom kernel. Today I tried to reconfigure my kernel and all seemed OK till I tried to "make install". The "config, make depend, make" sequence all went OK, without errors. However when I run "make install", I get the following error: # make install chflags noschg /kernel chflags: /kernel: Operation not permitted *** Error code 1 (ignored) mv /kernel /kernel.old This also is an Operation not permitted. Any idea on how to fix this problem? Should you need additional information or a copy of my latest kernel config file, let me know and I will forward it. Thank you in advance for your help in this matter, Regards, Dan Ouellet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:29:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dc-mx01.cluster1.charter.net (dc-mx01.cluster0.hsacorp.net [209.225.8.11]) by hub.freebsd.org (Postfix) with ESMTP id 1C41737B403 for ; Mon, 18 Jun 2001 14:29:48 -0700 (PDT) (envelope-from phbrown@charter.net) Received: from [63.151.74.116] (HELO charter.net) by dc-mx01.cluster1.charter.net (CommuniGate Pro SMTP 3.4.6) with ESMTP id 8559765 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 17:36:00 -0400 Message-ID: <3B2E72B0.A9995CA1@charter.net> Date: Mon, 18 Jun 2001 14:29:20 -0700 From: Parker Brown X-Mailer: Mozilla 4.75 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Tech Support Subject: [Fwd: BSD Internet Access Over CableTV] Content-Type: multipart/mixed; boundary="------------05E10DEF3CF1D2707FE5DE7D" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------05E10DEF3CF1D2707FE5DE7D Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Please pardon, but I *meant* to say USB connection, not UCB. --------------05E10DEF3CF1D2707FE5DE7D Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Mozilla-Status2: 00000000 Message-ID: <3B2E6EBD.7E75B6FF@charter.net> Date: Mon, 18 Jun 2001 14:12:30 -0700 From: Parker Brown X-Mailer: Mozilla 4.75 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Tech Support Subject: BSD Internet Access Over CableTV Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I've just retired my trusty 56K modem and opted for DSL-like speeds (256/64) and "always on" through Charter Communications, my local Cable TV company. Attachment is via UCB. My question is: before I go hacking through my configuration files, can someone tell me if support for that kind of Internet connection exists in BSD 4.3. Dmesg indicated that it located the Linksys UCB adaptor and labelled it ugen0. Will I need to get a special driver? Thanks Parker Brown --------------05E10DEF3CF1D2707FE5DE7D-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:36:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by hub.freebsd.org (Postfix) with ESMTP id B088637B401 for ; Mon, 18 Jun 2001 14:36:24 -0700 (PDT) (envelope-from mbeis@planet.nl) Received: from ipd50a233c.speed.planet.nl ([213.10.35.60]) by smtp06.wxs.nl (Netscape Messaging Server 4.05) with ESMTP id GF5AON01.H3N for ; Mon, 18 Jun 2001 23:36:23 +0200 Date: Mon, 18 Jun 2001 23:36:10 +0200 (CEST) From: Marco Beishuizen X-Sender: marco@FreeBSD.net To: freebsd-questions@freebsd.org Subject: opera & zombie processes Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have a question about Opera 5.0 under FreeBSD 4.0-RELEASE. When I'm browsing with Opera a lot of zombie processes are created. This goes on until the maximum number of processes are reached. After that no process can be started. I found out that only Opera does this and I can get rid of the zombie processes by shutting Opera down and restarting it. When I start Opera it even begins with 13 zombie processes, and during browsing it increases. I even get the impression that this interferes with fetchmail, which at a certain point stops fetching my mail. Does anybody know how I can get Opera not creating these zombie processes? I think I have resources enough. I have a PIII450 with 512mb ram. FBSD is with "normal" use running with about 54 processes, no heavy stuff running and plenty of free ram. Thanks in advance Kind regards, Marco ----------------------------------------- mbeis@planet.nl FreeBSD-4.0-RELEASE http://www.freebsd.org ----------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 14:56:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay.mailbox.co.za (relay.mailbox.co.za [196.2.147.67]) by hub.freebsd.org (Postfix) with ESMTP id 2D5CB37B401 for ; Mon, 18 Jun 2001 14:56:28 -0700 (PDT) (envelope-from liquidsoul@webmail.co.za) Received: from imail (iweb2 [192.168.0.12]) by relay.mailbox.co.za (8.11.0/8.11.0) with SMTP id f5IM8oI31981 for ; Tue, 19 Jun 2001 00:08:50 +0200 Message-Id: <200106182208.f5IM8oI31981@relay.mailbox.co.za> Date: Mon, 18 Jun 2001 23:58:12 +0200 From: "LIQUID SOUL" To: freebsd-questions@freebsd.org X-Mailer: WebMail v2.52R9 X-Sender-Ip: 196.15.129.2 X-Account: 98300 MIME-Version: 1.0 Content-Type: text/plain Subject: USB modem support Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I want to use a USB modem with my FreeBSD 4.2 i saw the it picking the modem up at ugen0 but when i tried to use this in ppp.conf it crashed and rebooted . Any ideas on why this happened and how to get the modem working ? TIA ________________________________________________________________ Mid-year intake! Enrol NOW & stand a chance to win 25% discount http://www.milpark.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15: 3:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tao.thought.org (sense-kline-248.oz.net [216.39.168.248]) by hub.freebsd.org (Postfix) with ESMTP id 458FB37B403 for ; Mon, 18 Jun 2001 15:03:13 -0700 (PDT) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.11.3/8.11.0) id f5ILbsx47557 for freebsd-questions@FreeBSD.ORG; Mon, 18 Jun 2001 14:37:54 -0700 (PDT) (envelope-from kline) From: Gary Kline Message-Id: <200106182137.f5ILbsx47557@tao.thought.org> Subject: WARNING: OFF-TOPIC re M$.... To: freebsd-questions@FreeBSD.ORG (FreeBSD Mailing List) Date: Mon, 18 Jun 2001 14:36:32 -0700 (PDT) Organization: <> thought.org: pvblic service Unix since 1986... <> X-Mailer: ELM [version 2.5 PL3] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Advance apologies if you consider this report by the High-Perfomance Computing folks spam. FreeBSD is mentioned often in this news item. ...Since this wire is in the public domain, I'll put it up on my website within the next 24 hours... gary Lee Gomes Reported For The Wall Street Journal Online: Microsoft Corp., even while mounting a new campaign against open-source software, has quietly been using such free computer code in several major products, as well as on key portions of a popular Web site -- despite denying last week that it did so. Software connected with the FreeBSD open-source operating system is used in several places deep inside several versions of Microsoft's Windows software, such as in the "TCP/IP" section that arranges all connections to the Internet. The company also uses FreeBSD on numerous "server" computers that manage major functions at its Hotmail free e-mail service, whose registered users exceed 100 million and make it one of the Web's busiest sites. -- Gary D. Kline kline@thought.org www.thought.org Public service Unix To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15: 3:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ntmail1.ener.com (ntmail1.ener.com [64.120.50.11]) by hub.freebsd.org (Postfix) with ESMTP id 3CED837B401 for ; Mon, 18 Jun 2001 15:03:32 -0700 (PDT) (envelope-from JHDeakle@ener.com) Received: by ntmail1.ener.com with Internet Mail Service (5.5.2653.19) id ; Mon, 18 Jun 2001 17:02:35 -0500 Message-ID: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> From: "Deakle, Jeff H." To: "'freebsd-questions@FreeBSD.ORG'" Cc: "Lyons, Kevin C." Subject: KVM switches Date: Mon, 18 Jun 2001 17:02:35 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C0F842.61723AE0" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C0F842.61723AE0 Content-Type: text/plain; charset="iso-8859-1" Well after searching the questions here all I see is people having problems with their KVM switches. 'Has anyone had any luck with any of the switches on the market? If so could you let me know which one works with NT & FBSD? Thanks! Jeff Deakle Enercon Engineering, Inc. (281)721-4680 www.ener.com ------_=_NextPart_001_01C0F842.61723AE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable KVM switches

Well after searching the questions here all I see is = people having problems with their KVM switches.  'Has anyone had = any luck with any of the switches on the market?  If so could you = let me know which one works with NT & FBSD? 

Thanks!

Jeff Deakle
Enercon Engineering, Inc.
(281)721-4680
www.ener.com

------_=_NextPart_001_01C0F842.61723AE0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15: 6:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.communityconnect.com (mail.communityconnect.com [209.10.169.57]) by hub.freebsd.org (Postfix) with ESMTP id 7B5E637B403 for ; Mon, 18 Jun 2001 15:06:28 -0700 (PDT) (envelope-from marius@mail.communityconnect.com) Received: from amavis by mail.communityconnect.com with scanned-ok (Exim 3.20 #1) id 15C7AB-0001rN-00 for questions@freebsd.org; Mon, 18 Jun 2001 18:06:27 -0400 Received: from [206.28.215.90] (helo=utterlux.hq.communitconnect.com) by mail.communityconnect.com with esmtp (Exim 3.20 #1) id 15C7AA-0001pp-00 for questions@FreeBSD.org; Mon, 18 Jun 2001 18:06:26 -0400 Date: Mon, 18 Jun 2001 18:06:30 -0400 (EDT) From: Marius X-Sender: marius@utterlux.hq.communitconnect.com To: questions@FreeBSD.org Subject: running out of buffer space for sockets Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG One of my webservers is having an on-again, off-again problem with networking. When the load gets up there (thttpd is pushing maybe 15MB right now) I begin to run out of buffer space to create sockets. >Jun 18 16:44:01 cc124 sendmail[39781]: f5IKi1439781: SYSERR(root): makeconnection: cannot create socket: No buffer space available >Jun 18 16:44:01 cc124 sendmail[39781]: f5IKi1439781: SYSERR(root): makeconnection: cannot create socket: No buffer space available I get similar or related messages when I try to ping someone, use tcpdump, do an nslookup etc. Running one of these the commands in quick succession produces some successes, some failures, right after one another. I have networking fairly beefed up: ># sysclt -a |grep max >kern.maxvnodes: 129508 >kern.maxproc: 2068 >kern.maxfiles: 65536 >...snip... >kern.maxfilesperproc: 65500 >kern.maxprocperuid: 2067 >kern.ipc.maxsockbuf: 262144 >kern.ipc.somaxconn: 256 >...snip... >kern.ipc.maxsockets: 16384 >...snip... >vfs.maxbufspace: 117932032 >vfs.maxmallocbufspace: 5863833 ># netstat -m >7115/8624/65536 mbufs in use (current/peak/max): > 5454 mbufs allocated to data > 1661 mbufs allocated to packet headers >5056/5854/16384 mbuf clusters in use (current/peak/max) >13864 Kbytes allocated to network (28% of mb_map in use) >0 requests for memory denied >0 requests for memory delayed >0 calls to protocol drain routines Basically I am trying to figure out if I can tweak something to make this scarce resource less scarce. I could try changing some of the MIB's but I am not totally sure whcih ones would effect this. I am researching this the best I can, but I feel a bit overwhelmed. I'd hate to tweak something up beyond sane levels unknowingly. Pointers or suggestions would be appreciated. system info: 4.2-STABLE FreeBSD Dual 700Mhz Processors 1 GB RAM 2 eepro100 NIC cards (100baseTX ) -Marius To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:15:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 9B9BA37B401 for ; Mon, 18 Jun 2001 15:15:22 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.11.3/8.11.3) id f5IMFBQ19982; Mon, 18 Jun 2001 17:15:11 -0500 (CDT) (envelope-from dan) Date: Mon, 18 Jun 2001 17:15:11 -0500 From: Dan Nelson To: "Deakle, Jeff H." Cc: "'freebsd-questions@FreeBSD.ORG'" , "Lyons, Kevin C." Subject: Re: KVM switches Message-ID: <20010618171511.A29971@dan.emsphone.com> References: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> User-Agent: Mutt/1.3.19i X-OS: FreeBSD 5.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Jun 18), Deakle, Jeff H. said: > Well after searching the questions here all I see is people having > problems with their KVM switches. 'Has anyone had any luck with any > of the switches on the market? If so could you let me know which one > works with NT & FBSD? I've had no problems with Cybex Switchview boxes which have auto-detecting 5- or 6-pin keyboard, and PS/2- or serial- mouse ports, which mean you can plug just about anything into it. We use the 2- and 8-port models. We also have some Belkin Omniview boxes which are considerably cheaper, but not as nice to use. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:22:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kineo.bowdoin.edu (kineo.bowdoin.edu [139.140.14.35]) by hub.freebsd.org (Postfix) with ESMTP id 7D45237B403 for ; Mon, 18 Jun 2001 15:22:40 -0700 (PDT) (envelope-from mcowger@bowdoin.edu) Received: from mcfly ([139.140.133.82]) by kineo.bowdoin.edu (Netscape Messaging Server 4.15) with SMTP id GF5CTR00.RO0; Mon, 18 Jun 2001 18:22:39 -0400 From: "Matthew K. Cowger" To: "Deakle Jeff H." , Cc: "Lyons Kevin C." Subject: RE: KVM switches Date: Mon, 18 Jun 2001 18:24:03 -0400 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0002_01C0F823.DA6882C0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0002_01C0F823.DA6882C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit KVM switchesI don't know what your requirement are, but here we use the Raritan MX4 series: (http://www.raritan.com/products_mx4_index.html) with great luck to manage 50+ servers, mixed fBSD, Linux, VMS, Sun, OSF1, NT, 2K, etc). Good luck in your search. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff H. Sent: Monday, June 18, 2001 6:03 PM To: 'freebsd-questions@FreeBSD.ORG' Cc: Lyons, Kevin C. Subject: KVM switches Well after searching the questions here all I see is people having problems with their KVM switches. 'Has anyone had any luck with any of the switches on the market? If so could you let me know which one works with NT & FBSD? Thanks! Jeff Deakle Enercon Engineering, Inc. (281)721-4680 www.ener.com ------=_NextPart_000_0002_01C0F823.DA6882C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable KVM switches
I=20 don't know what your requirement are, but here we use the Raritan MX4 = series:=20 (http://www.rarita= n.com/products_mx4_index.html)=20 with great luck to manage 50+ servers, mixed fBSD, Linux, VMS, Sun, = OSF1, NT,=20 2K, etc).  Good luck in your search.
-----Original Message-----
From:=20 owner-freebsd-questions@FreeBSD.ORG=20 [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of = Deakle, Jeff=20 H.
Sent: Monday, June 18, 2001 6:03 PM
To:=20 'freebsd-questions@FreeBSD.ORG'
Cc: Lyons, Kevin=20 C.
Subject: KVM switches

Well after searching the questions here all I see is = people=20 having problems with their KVM switches.  'Has anyone had any = luck with=20 any of the switches on the market?  If so could you let me know = which one=20 works with NT & FBSD? 

Thanks!

Jeff Deakle
Enercon = Engineering,=20 Inc.
(281)721-4680
www.ener.com

------=_NextPart_000_0002_01C0F823.DA6882C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:23:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.nikoma.de (smtp2.nikoma.de [212.122.128.25]) by hub.freebsd.org (Postfix) with ESMTP id B477437B406 for ; Mon, 18 Jun 2001 15:23:37 -0700 (PDT) (envelope-from chub@nikocity.de) Received: from dialin29.pg1-nt.dusseldorf.nikoma.de (dialin29.pg1-nt.dusseldorf.nikoma.de [213.54.96.29]) by smtp2.nikoma.de (8.9.3/8.9.3) with ESMTP id AAA87495 for ; Tue, 19 Jun 2001 00:23:36 +0200 (CEST) (envelope-from chub@nikocity.de) Date: Tue, 19 Jun 2001 00:21:10 +0200 From: Christian X-Mailer: The Bat! (v1.52f) Personal Reply-To: Hubert X-Priority: 3 (Normal) Message-ID: <1517333351.20010619002110@nikocity.de> To: freebsd-questions@FreeBSD.ORG Subject: Cannot mount DVDROM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! I am having problems with mounting my dvd-rom. I've installed FreeBSD 4.3. When I try to mount via: #mount /cdrom the following message occurs: cd9660: /dev/acd0c: Invalid argument When I try: #mount /dev/acd0c /cdrom it says: acd0: READ_CD command timeout ..resetting ata: resetting devices.......done panic: vm_fault: fault on nofault entry, addr c684a000 and the system crashes. The dmesg entry is as follows: acd0: DVD-ROM at ata1-master using PIO4 The fstab entry is acd0c ......blah The drive is connected to the secondary IDE port as a master. Mainboard ASUS A7V133 Bios 1.4 Thanks in advance for your help. Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:27:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts6-srv.bellnexxia.net (tomts6.bellnexxia.net [209.226.175.26]) by hub.freebsd.org (Postfix) with ESMTP id 3665737B401; Mon, 18 Jun 2001 15:27:45 -0700 (PDT) (envelope-from matt@gsicomp.on.ca) Received: from xena.gsicomp.on.ca ([64.228.154.141]) by tomts6-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010618222741.LUW29618.tomts6-srv.bellnexxia.net@xena.gsicomp.on.ca>; Mon, 18 Jun 2001 18:27:41 -0400 Received: from hermes (hermes.gsicomp.on.ca [192.168.0.18]) by xena.gsicomp.on.ca (8.11.1/8.11.1) with SMTP id f5IMP4N74734; Mon, 18 Jun 2001 18:25:04 -0400 (EDT) (envelope-from matt@gsicomp.on.ca) Message-ID: <002501c0f846$00efab40$1200a8c0@gsicomp.on.ca> From: "Matthew Emmerton" To: "James Housley" , "shailesh sheoran" Cc: "FreeBSD-Questions" References: <3B2E5FDB.B0EF367D@thehousleys.net> Subject: Re: d-link 530TX + cards still dysfunctional Date: Mon, 18 Jun 2001 18:28:29 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > shailesh sheoran wrote: > > > > hi, > > i am trying to setup 2 dlink dfe530tx+ cards on my PIII > > 750MHz freebsd 4.3 Release system. > > despite all efforts I still can't get them working. i have tried > > looking for information everywhere but > > the standard procedure of adding the lines > > device miibus > > device rl > > isn't working for me. I know the card is not damaged because i can access > > internet from windows98 but Freebsd still can't get the card working. D-Link 530TX+ and 538TX cards are not supported in 4.3-RELEASE. Patches supporting these cards have been sent to the rl driver maintainer by multiple contributors (directly and via the FreeBSD PR mechanism) over the past few months, and so far only the 530TX+ is supported in -CURRENT. -- Matt Emmerton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:34:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pltn13.pbi.net (mta8.pltn13.pbi.net [64.164.98.22]) by hub.freebsd.org (Postfix) with ESMTP id 4E91F37B406 for ; Mon, 18 Jun 2001 15:34:14 -0700 (PDT) (envelope-from mike_makonnen@yahoo.com) Received: from blackbox.pacbell.net ([64.166.86.203]) by mta8.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GF500DN8DD1L7@mta8.pltn13.pbi.net> for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 15:34:13 -0700 (PDT) Received: (from mikem@localhost) by blackbox.pacbell.net (8.11.3/8.11.3) id f5IMcQx15425 for freebsd-questions@freebsd.org; Mon, 18 Jun 2001 15:38:27 -0700 (PDT envelope-from mikem) Date: Mon, 18 Jun 2001 15:38:27 -0700 (PDT) From: mikem Subject: How to automatically pass input to interactive commands To: freebsd-questions@freebsd.org Message-id: <200106182238.f5IMcQx15425@blackbox.pacbell.net> Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I want to be able to run some interactive scripts and programs from a script. How can I do that. For example: the XFree86 port. It requires that you answer some questions before it installs. What I would like is to be able to start a script and walk away from the computer. The script will run make and answer any questions (the answers to the questions will already be somewhere in my script) that the installation script asks. So, when I come back a few hours later XFree86 is compiled and ready to go. I'm sure there must be some answer to this. I just haven't figured it out yet. Thanks, Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:38: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from oddjob.adhesivemedia.com (oddjob.adhesivemedia.com [207.202.159.77]) by hub.freebsd.org (Postfix) with ESMTP id 0DD5D37B401 for ; Mon, 18 Jun 2001 15:36:01 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Received: from localhost (philip@localhost) by oddjob.adhesivemedia.com (8.11.1/8.11.1) with ESMTP id f5IMS5351133; Mon, 18 Jun 2001 15:28:09 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Date: Mon, 18 Jun 2001 15:28:05 -0700 (PDT) From: Philip Hallstrom To: Mike Meyer Cc: Jonathan Slivko , Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: <15150.28209.824830.995938@guru.mired.org> Message-ID: <20010618152529.C9218-100000@oddjob.adhesivemedia.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > There are USB readers/writers available for both SmartMedia and > CompactFlash that use the USB protocols supported by the umass device, > so that you can read those cards like disks. That's a lot faster than > using a serial line connected to the camera, but will cost a > significant fraction of your budget for the reader/writer. > Readers/writers for other formats may also exist. At least one > USB-capable camera uses those protocols, and hence looks like a disk > itself without having to move the memory card. Be careful which one you get however. I have the Sandisk SDDR-05 which does not work (it's not actually a Sandisk, but some other party and due to some licensing agreement no specs can be released). There's another one, the SDDR-05a (I think) that looks the same and does work. Also the SDDR-31 (I think, can't check at the moment) works as well. If you search the archives for "SDDR" you'll find the posts. Mine only cost about $30... and works just like any removable disk as far as FreeBSD is concerned. BTW - my camera is a Kodak DC215. -philip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 15:52:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 2E67B37B401 for ; Mon, 18 Jun 2001 15:52:15 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5IMp0114549; Mon, 18 Jun 2001 18:51:00 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Mon, 18 Jun 2001 18:51:00 -0400 (EDT) From: Joe Clarke To: mikem Cc: Subject: Re: How to automatically pass input to interactive commands In-Reply-To: <200106182238.f5IMcQx15425@blackbox.pacbell.net> Message-ID: <20010618184852.E45610-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You could do a make -DDISTRIB all with XFree86-4, or write an expect script to spawn the command, and answer the questions for you. Joe Clarke On Mon, 18 Jun 2001, mikem wrote: > Hi, > > I want to be able to run some interactive scripts > and programs from a script. How can I do that. > > For example: the XFree86 port. It requires that you > answer some questions before it installs. What I would > like is to be able to start a script and walk away > >from the computer. The script will run make and > answer any questions (the answers to the questions > will already be somewhere in my script) that the > installation script asks. So, when I come back a few > hours later XFree86 is compiled and ready to go. > > I'm sure there must be some answer to this. I just > haven't figured it out yet. > > Thanks, > Mike > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:36:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vargas.fst.com.br (vargas.fst.com.br [200.239.209.9]) by hub.freebsd.org (Postfix) with ESMTP id D0FAE37B406 for ; Mon, 18 Jun 2001 16:35:03 -0700 (PDT) (envelope-from info@industriavirtual.com.br) Received: from mail pickup service by vargas.fst.com.br with Microsoft SMTPSVC; Mon, 18 Jun 2001 20:19:52 -0300 From: To: Subject: IV-News (18/6/2001): Loja Virtual Date: Mon, 18 Jun 2001 20:19:50 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_32A0_01C0F834.07181320" X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Message-ID: X-OriginalArrivalTime: 18 Jun 2001 23:19:52.0440 (UTC) FILETIME=[2D68FF80:01C0F84D] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_32A0_01C0F834.07181320 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =09 Loja Virtual: Inform=E1tica A Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. Trata-se de = uma loja virtual completa que funciona independente ou anexada a qualquer website existente. =09 Apresenta=E7=E3o...P=E1gina Inicial A loja Virtual recebe os visitantes com a apresenta=E7=E3o da sua = empresa, com links para as categorias de produtos (hardware, software, acess=F3rios, suprimentos etc.), p=E1gina de ajuda, p=E1gina de contato = etc..=09 =09 Vitrine de produtos...Vitrine de Produtos O visitante percorre as categorias de produtos como quem visita os corredores de um supermercado, escolhe a quantidade de cada mercadoria que deseja adquirir e as coloca na Lista de Compras.=09 =09 Lista de Compras...Lista de Compras Depois de escolher os produtos, o visitante dirige-se ao caixa para que o frete, o valor m=EDnimo da compra, o valor do pedido e a quantidade = dos itens sejam confirmados e calculados.=09 =09 Cadastro de clientes...Cadastro de Cliente Se for a primeira compra do visitante, ele ser=E1 automaticamente = enviado =E0 p=E1gina de cadastro. Ele receber=E1 uma senha que lhe permitir=E1 realizar compras como = cliente cadastrado.=09 =09 Formas de pagamento...Pagamento Para finalizar, o cliente escolhe a forma de pagamento e o pedido =E9 efetuado. A Industria Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas de pagamento online.=09 =09 Envio do Pedido Em poucos segundos, voc=EA receber=E1 o pedido do cliente via e-mail. Ent=E3o =E9 s=F3 embalar e despachar a encomenda! A Industria Virtual poder=E1 ajudar sua empresa a montar um eficiente sistema de log=EDstica para que atenda perfeitamente seus clientes.=09 =09 E tem mais... * A Loja Virtual pode ser perfeitamente adaptada ao visual de seu website e possui um setor de administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s do qual a qualquer momento, poder=E1 incluir, excluir ou alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet. * Pre=E7os =E0 partir de R$ 300,00. Pagamento em at=E9 3 vezes iguais. * Descontos especiais para provedores e webmasters. * Clique aqui para ver uma loja em funcionamento. =20 F=F3runs... F=F3runs Chats... Chats =20 Guest-Books =20 Cart=F5esPostais =20 PesquisaOnLine =20 Cadastro de Visitantes =20 Not=EDcias e Novidades =20 Centro de Mensagens E muito mais... Para maiores informa=E7=F5es, solicite a visita de um de nossos representantes: (21) 9132-4892 ou visite o nosso site na Internet: http://www.industriavirtual.com.br.=09 Clique aqui para remover seu e-mail do nosso cadastro. Copyright =A92001 by Industria Virtual =20 ------=_NextPart_000_32A0_01C0F834.07181320 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Loj= a Virtual: Inform=E1tica
3D'Loja

A = Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. = Trata-se de uma loja virtual completa que funciona independente ou = anexada a qualquer website existente.

3D'Apresenta=E7=E3o...'P=E1gina Inicial
A loja Virtual recebe os = visitantes com a apresenta=E7=E3o da sua empresa, com links para as = categorias de produtos (hardware, software, acess=F3rios, suprimentos = etc.), p=E1gina de ajuda, p=E1gina de contato etc..
3D'VitrineVitrine de Produtos
O visitante percorre as = categorias de produtos como quem visita os corredores de um = supermercado, escolhe a quantidade de cada mercadoria que deseja = adquirir e as coloca na Lista de Compras.
3D'ListaLista de Compras
Depois de escolher os = produtos, o visitante dirige-se ao caixa para que o frete, o valor = m=EDnimo da compra, o valor do pedido e a quantidade dos itens sejam = confirmados e calculados.
3D'CadastroCadastro de Cliente
Se for a = primeira compra do visitante, ele ser=E1 automaticamente enviado =E0 = p=E1gina de cadastro.
Ele receber=E1 uma senha que lhe = permitir=E1 realizar compras como cliente cadastrado.
3D'FormasPagamento
Para finalizar, o cliente escolhe a = forma de pagamento e o pedido =E9 efetuado.
A Industria = Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas = de pagamento online.
Envio do Pedido
Em = poucos segundos, voc=EA receber=E1 o pedido do cliente via = e-mail.
Ent=E3o =E9 s=F3 embalar e despachar a encomenda!
A = Industria Virtual poder=E1 ajudar sua empresa a montar um = eficiente sistema de log=EDstica para que atenda perfeitamente seus = clientes.
E tem = mais...
  • A Loja Virtual pode ser perfeitamente = adaptada ao visual de seu website e possui um setor de = administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s = do qual a qualquer momento, poder=E1 incluir, excluir ou = alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet.
  • Pre=E7os =E0 = partir de R$ 300,00. Pagamento em at=E9 3 vezes = iguais.
  • Descontos especiais para provedores e = webmasters.
  • Clique aqui para ver uma loja em = funcionamento.

3D'F=F3runs...'
F=F3runs

3D'Chats...'
Chats


Guest-Books


Cart=F5esPostais


PesquisaOnLine


Cadastro
de Visitantes


Not=EDcias e
Novidades


Centro de
Mensagens

E muito mais...

Para maiores informa=E7=F5es, = solicite a visita de um de nossos representantes: (21) 9132-4892
ou = visite o nosso site na Internet: = http://www.industriavirtual.com.br.

Clique aqui para remover seu = e-mail do nosso cadastro.
Copyright =A92001 by Industria = Virtual
------=_NextPart_000_32A0_01C0F834.07181320-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:36:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12005.mail.yahoo.com (web12005.mail.yahoo.com [216.136.172.213]) by hub.freebsd.org (Postfix) with SMTP id 7D61637B403 for ; Mon, 18 Jun 2001 16:36:49 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010618233649.10051.qmail@web12005.mail.yahoo.com> Received: from [61.9.188.21] by web12005.mail.yahoo.com; Tue, 19 Jun 2001 09:36:49 EST Date: Tue, 19 Jun 2001 09:36:49 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: can I tar and copy src & ports after cvsupping? To: fbsd MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I am looking for a quick way out to cvsup a machine with a slowwwwww connection. I have a fast adsl connection to another machine and have cvsupped the /src & ports trees. Q1) To do the same to my other slow connection machine can I simply tarball the /usr/src and /usr/ports and ftp them to my slow machine & then make etc? Tell me it is that simle pleeeese. Q2) If I tar up the trees are the or how can the permissions be retained... tar -czvf do the trick? Q3) I have 4.2 stable on these 2 machines. I have read the make world docs but to be honest I have very little idea about what I am reading. It looks as if I can just do the make world process and it should work. Should I be confident here. These are mission critical machines and I am by NO means expert. Any tips would be invaluable. PS Keeping in mind I am a dummy, I'd appreciate plain as possible language. I have no external support. You good people are it. Thanks so much Keith _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:48: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from trap.geckobot.com (mail.geckobot.com [64.81.103.90]) by hub.freebsd.org (Postfix) with ESMTP id CCA3437B403 for ; Mon, 18 Jun 2001 16:47:51 -0700 (PDT) (envelope-from rick@geckobot.com) Received: from trap.geckobot.com (trap.geckobot.com [192.168.254.254]) by trap.geckobot.com (8.11.3/8.9.3) with SMTP id f5INgZ418309; Mon, 18 Jun 2001 16:42:36 -0700 (MST) (envelope-from rick@geckobot.com) Content-Type: text/plain; charset="iso-8859-1" From: Rick Reply-To: rick@geckobot.com Organization: geckobot To: Erik Trulsson Subject: Re: Significant Performance Drop during 4.0-4.3 Upgrade Date: Mon, 18 Jun 2001 16:42:35 -0700 X-Mailer: KMail [version 1.2] Cc: freebsd-questions@FreeBSD.ORG References: <01061813442301.17965@trap.geckobot.com> <20010618230736.A44631@student.uu.se> In-Reply-To: <20010618230736.A44631@student.uu.se> MIME-Version: 1.0 Message-Id: <01061816423505.17965@trap.geckobot.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Erik- Thanks for responding so quickly! Unless I did something wrong, that didn't seem to do the trick. I sure thought it was going to work, though. I added the following line to /boot/defaults/loader.conf: hw.ata.wc="1" ...and rebooted but the performance hasn't picked up to where it was with FreeBSD 4.0. It may have gone up some-- I haven't been tracking the numbers very closely. By coincidence, one of the three systems was upgraded to FreeBSD 4.3 STABLE instead of RELEASE, and it too shows roughly the same performance metrics. If I didn't do this right, please let me know. Otherwise if you or anyone has other thoughts, I'd be happy to give them a try. Rick BTW- I'm not sure it's worth mentioning, but I still don't see any of this in the 4.3 RELEASE notes... On Monday 18 June 2001 14:07, Erik Trulsson wrote: > On Mon, Jun 18, 2001 at 01:44:23PM -0700, Rick wrote: > > Hi! > > > > I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using sysinstall, and I > > noticed that some rm -r operations seemed a little slow after the > > upgrade. > > > > Coincidentally I've been working on an ISAM alternative to B-tree so I > > have a bunch of performance benchmarks handy. The results: > > > > Disk hits are *much* slower after the upgrade. Many times slower, in > > fact. I also had Berkley DB benchmarks that I was using for comparison > > and they too were heavily impacted. > > > > For the life of me, I can't figure out what the heck happened! > > SOFTUPDATES were off before the upgrade and I didn't change of the disk > > tuning. I did tweak my kernel a bit, but nothing should have had this > > effect-- I just removed a few things that weren't being used like EISA > > and some network cards. When I examine dmesg everything still seems to > > be recognized as ULTRA DMA, etc. I've tried putting everything back in > > my kernel and I've try the GENERIC kernel with no improvements. > > > > I've looked through the release notes, etc., and couldn't find anythingd > > etailing this problem. Did I miss something? Am I just extra lucky? > > Yes, you missed one small thing. Write caching for IDE disks were > turned off by default in 4.3-RELEASE. It has since been turned back on > in 4.3-STABLE on since the performance hit was too big. > (The reason it was turned off is that if you have the write-cache > turned on can result in serious data-loss if you have a power failure.) > > You can turn it back on by setting hw.ata.wc=1 from the loader. > See the manpages for ata(4) and loader(8) for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:48:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from earth.wnm.net (earth.wnm.net [208.246.240.243]) by hub.freebsd.org (Postfix) with ESMTP id CFDF937B406 for ; Mon, 18 Jun 2001 16:48:54 -0700 (PDT) (envelope-from alex@wnm.net) Received: from localhost (alex@localhost) by earth.wnm.net (8.11.0/8.11.0) with ESMTP id f5INn3T82815; Mon, 18 Jun 2001 18:49:07 -0500 (CDT) Date: Mon, 18 Jun 2001 18:49:03 -0500 (CDT) From: Alex Charalabidis To: Fernando Gleiser Cc: Subject: Re: Problems with SB16 ISA in 4.3 In-Reply-To: <20010618112045.U46781-100000@cactus.fi.uba.ar> Message-ID: <20010618184733.G48002-100000@earth.wnm.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Fernando Gleiser wrote: > I'm having problems with a Sound Blaster 16 (ISA) on FreeBSD 4.3. > > I have the following lines on my kernel config file: > > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > device pcm > > And when the machine boots the card gets detected: > > sbc0: at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 > pcm0: on sbc0 > > sndstat says the card is there: > > FreeBSD Audio Driver (newpcm) Apr 29 2001 16:36:27 > Installed devices: > pcm0: at io 0x220 irq 5 drq 1:5 (1p/1r channels duplex) > > > But I can't make the sound work. If I try to play an mp3 file, I get the > following error on dmesg: > > pcm0: play interrupt timeout, channel dead > Drop the sbc0 device from the conf. The pcm device alone should let it detect the SB16. hth -ac -- =================================================================== Alex Charalabidis Worldspice Technologies 5050 Poplar Ave. Memphis, TN, USA +1 901 432 6000 Opinions expressed are mine alone but may be yours for a small fee. =================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:49:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailf.telia.com (mailf.telia.com [194.22.194.25]) by hub.freebsd.org (Postfix) with ESMTP id BF74D37B408 for ; Mon, 18 Jun 2001 16:48:58 -0700 (PDT) (envelope-from ertr1013@student.uu.se) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by mailf.telia.com (8.11.2/8.11.0) with ESMTP id f5INmvJ10132 for ; Tue, 19 Jun 2001 01:48:57 +0200 (CEST) Received: from ertr1013.student.uu.se (h185n2fls20o913.telia.com [212.181.163.185]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id BAA23471 for ; Tue, 19 Jun 2001 01:48:56 +0200 (CEST) Received: (qmail 45849 invoked by uid 1001); 18 Jun 2001 23:48:26 -0000 Date: Tue, 19 Jun 2001 01:48:25 +0200 From: Erik Trulsson To: Keith Spencer Cc: fbsd Subject: Re: can I tar and copy src & ports after cvsupping? Message-ID: <20010619014825.A45835@student.uu.se> Mail-Followup-To: Keith Spencer , fbsd References: <20010618233649.10051.qmail@web12005.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20010618233649.10051.qmail@web12005.mail.yahoo.com> User-Agent: Mutt/1.3.19i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 09:36:49AM +1000, Keith Spencer wrote: > Hi all, > I am looking for a quick way out to cvsup a machine > with a slowwwwww connection. > I have a fast adsl connection to another machine and > have cvsupped the /src & ports trees. > Q1) > To do the same to my other slow connection machine can > I simply tarball the /usr/src and /usr/ports > and ftp them to my slow machine & then make etc? > Tell me it is that simle pleeeese. That should work fine > Q2) > If I tar up the trees are the or how can the > permissions be retained... tar -czvf do the trick? You have to use the -p flag to tar when unpacking the tarball. So: tar zcvf to create the tarball tar zxvpf to unpack it > Q3) > I have 4.2 stable on these 2 machines. > I have read the make world docs but to be honest I > have very little idea about what I am reading. It > looks as if I can just do the make world process and > it should work. Should I be confident here. These are > mission critical machines and I am by NO means expert. > Any tips would be invaluable. PS Keeping in mind I am > a dummy, I'd appreciate plain as possible language. > I have no external support. You good people are it. > Thanks so much > Keith > It is fairly easy. Remember to read /usr/src/UPDATING first. I would strongly recommend that you try out the procedure on some machine that is not mission-critical first if you can. That way you can make sure that everything works without risking anything important. ("Always mount a scratch monkey.") -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:53:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vargas.fst.com.br (vargas.fst.com.br [200.239.209.9]) by hub.freebsd.org (Postfix) with ESMTP id AE1DF37B401 for ; Mon, 18 Jun 2001 16:53:07 -0700 (PDT) (envelope-from info@industriavirtual.com.br) Received: from mail pickup service by vargas.fst.com.br with Microsoft SMTPSVC; Mon, 18 Jun 2001 20:19:47 -0300 From: To: Subject: IV-News (18/6/2001): Loja Virtual Date: Mon, 18 Jun 2001 20:19:47 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_3274_01C0F834.0519AB10" X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Message-ID: X-OriginalArrivalTime: 18 Jun 2001 23:19:47.0814 (UTC) FILETIME=[2AA72060:01C0F84D] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_3274_01C0F834.0519AB10 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =09 Loja Virtual: Inform=E1tica A Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. Trata-se de = uma loja virtual completa que funciona independente ou anexada a qualquer website existente. =09 Apresenta=E7=E3o...P=E1gina Inicial A loja Virtual recebe os visitantes com a apresenta=E7=E3o da sua = empresa, com links para as categorias de produtos (hardware, software, acess=F3rios, suprimentos etc.), p=E1gina de ajuda, p=E1gina de contato = etc..=09 =09 Vitrine de produtos...Vitrine de Produtos O visitante percorre as categorias de produtos como quem visita os corredores de um supermercado, escolhe a quantidade de cada mercadoria que deseja adquirir e as coloca na Lista de Compras.=09 =09 Lista de Compras...Lista de Compras Depois de escolher os produtos, o visitante dirige-se ao caixa para que o frete, o valor m=EDnimo da compra, o valor do pedido e a quantidade = dos itens sejam confirmados e calculados.=09 =09 Cadastro de clientes...Cadastro de Cliente Se for a primeira compra do visitante, ele ser=E1 automaticamente = enviado =E0 p=E1gina de cadastro. Ele receber=E1 uma senha que lhe permitir=E1 realizar compras como = cliente cadastrado.=09 =09 Formas de pagamento...Pagamento Para finalizar, o cliente escolhe a forma de pagamento e o pedido =E9 efetuado. A Industria Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas de pagamento online.=09 =09 Envio do Pedido Em poucos segundos, voc=EA receber=E1 o pedido do cliente via e-mail. Ent=E3o =E9 s=F3 embalar e despachar a encomenda! A Industria Virtual poder=E1 ajudar sua empresa a montar um eficiente sistema de log=EDstica para que atenda perfeitamente seus clientes.=09 =09 E tem mais... * A Loja Virtual pode ser perfeitamente adaptada ao visual de seu website e possui um setor de administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s do qual a qualquer momento, poder=E1 incluir, excluir ou alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet. * Pre=E7os =E0 partir de R$ 300,00. Pagamento em at=E9 3 vezes iguais. * Descontos especiais para provedores e webmasters. * Clique aqui para ver uma loja em funcionamento. =20 F=F3runs... F=F3runs Chats... Chats =20 Guest-Books =20 Cart=F5esPostais =20 PesquisaOnLine =20 Cadastro de Visitantes =20 Not=EDcias e Novidades =20 Centro de Mensagens E muito mais... Para maiores informa=E7=F5es, solicite a visita de um de nossos representantes: (21) 9132-4892 ou visite o nosso site na Internet: http://www.industriavirtual.com.br.=09 Clique aqui para remover seu e-mail do nosso cadastro. Copyright =A92001 by Industria Virtual =20 ------=_NextPart_000_3274_01C0F834.0519AB10 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Loj= a Virtual: Inform=E1tica
3D'Loja

A = Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. = Trata-se de uma loja virtual completa que funciona independente ou = anexada a qualquer website existente.

3D'Apresenta=E7=E3o...'P=E1gina Inicial
A loja Virtual recebe os = visitantes com a apresenta=E7=E3o da sua empresa, com links para as = categorias de produtos (hardware, software, acess=F3rios, suprimentos = etc.), p=E1gina de ajuda, p=E1gina de contato etc..
3D'VitrineVitrine de Produtos
O visitante percorre as = categorias de produtos como quem visita os corredores de um = supermercado, escolhe a quantidade de cada mercadoria que deseja = adquirir e as coloca na Lista de Compras.
3D'ListaLista de Compras
Depois de escolher os = produtos, o visitante dirige-se ao caixa para que o frete, o valor = m=EDnimo da compra, o valor do pedido e a quantidade dos itens sejam = confirmados e calculados.
3D'CadastroCadastro de Cliente
Se for a = primeira compra do visitante, ele ser=E1 automaticamente enviado =E0 = p=E1gina de cadastro.
Ele receber=E1 uma senha que lhe = permitir=E1 realizar compras como cliente cadastrado.
3D'FormasPagamento
Para finalizar, o cliente escolhe a = forma de pagamento e o pedido =E9 efetuado.
A Industria = Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas = de pagamento online.
Envio do Pedido
Em = poucos segundos, voc=EA receber=E1 o pedido do cliente via = e-mail.
Ent=E3o =E9 s=F3 embalar e despachar a encomenda!
A = Industria Virtual poder=E1 ajudar sua empresa a montar um = eficiente sistema de log=EDstica para que atenda perfeitamente seus = clientes.
E tem = mais...
  • A Loja Virtual pode ser perfeitamente = adaptada ao visual de seu website e possui um setor de = administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s = do qual a qualquer momento, poder=E1 incluir, excluir ou = alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet.
  • Pre=E7os =E0 = partir de R$ 300,00. Pagamento em at=E9 3 vezes = iguais.
  • Descontos especiais para provedores e = webmasters.
  • Clique aqui para ver uma loja em = funcionamento.

3D'F=F3runs...'
F=F3runs

3D'Chats...'
Chats


Guest-Books


Cart=F5esPostais


PesquisaOnLine


Cadastro
de Visitantes


Not=EDcias e
Novidades


Centro de
Mensagens

E muito mais...

Para maiores informa=E7=F5es, = solicite a visita de um de nossos representantes: (21) 9132-4892
ou = visite o nosso site na Internet: = http://www.industriavirtual.com.br.

Clique aqui para remover seu e-mail do = nosso cadastro.
Copyright =A92001 by Industria = Virtual
------=_NextPart_000_3274_01C0F834.0519AB10-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 16:58:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12006.mail.yahoo.com (web12006.mail.yahoo.com [216.136.172.214]) by hub.freebsd.org (Postfix) with SMTP id 896A537B403 for ; Mon, 18 Jun 2001 16:58:08 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010618235808.14178.qmail@web12006.mail.yahoo.com> Received: from [61.9.188.21] by web12006.mail.yahoo.com; Tue, 19 Jun 2001 09:58:08 EST Date: Tue, 19 Jun 2001 09:58:08 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: THANKS ALL ->Re: can I tar and copy src & ports after cvsupping? To: Erik Trulsson Cc: fbsd In-Reply-To: <20010619014825.A45835@student.uu.se> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks Erik... As usual you people are gems! --- Erik Trulsson wrote: > On Tue, Jun 19, 2001 at 09:36:49AM +1000, Keith > Spencer wrote: > > Hi all, > > I am looking for a quick way out to cvsup a > machine > > with a slowwwwww connection. > > I have a fast adsl connection to another machine > and > > have cvsupped the /src & ports trees. > > Q1) > > To do the same to my other slow connection machine > can > > I simply tarball the /usr/src and /usr/ports > > and ftp them to my slow machine & then make etc? > > Tell me it is that simle pleeeese. > > That should work fine > > > Q2) > > If I tar up the trees are the or how can the > > permissions be retained... tar -czvf do the trick? > > You have to use the -p flag to tar when unpacking > the tarball. > So: > tar zcvf to create the tarball > tar zxvpf to unpack it > > > > Q3) > > I have 4.2 stable on these 2 machines. > > I have read the make world docs but to be honest I > > have very little idea about what I am reading. It > > looks as if I can just do the make world process > and > > it should work. Should I be confident here. These > are > > mission critical machines and I am by NO means > expert. > > Any tips would be invaluable. PS Keeping in mind I > am > > a dummy, I'd appreciate plain as possible > language. > > I have no external support. You good people are > it. > > Thanks so much > > Keith > > > > It is fairly easy. Remember to read > /usr/src/UPDATING first. > I would strongly recommend that you try out the > procedure on some > machine that is not mission-critical first if you > can. > That way you can make sure that everything works > without risking > anything important. > ("Always mount a scratch monkey.") > > > -- > > Erik Trulsson > ertr1013@student.uu.se > _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:34:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web4601.mail.yahoo.com (web4601.mail.yahoo.com [216.115.105.156]) by hub.freebsd.org (Postfix) with SMTP id 0836837B408 for ; Mon, 18 Jun 2001 17:34:06 -0700 (PDT) (envelope-from jasonla00@yahoo.com) Message-ID: <20010619003405.5960.qmail@web4601.mail.yahoo.com> Received: from [209.179.194.126] by web4601.mail.yahoo.com; Mon, 18 Jun 2001 17:34:05 PDT Date: Mon, 18 Jun 2001 17:34:05 -0700 (PDT) From: Jason La Reply-To: jasonla@pobox.com Subject: Problems with Wheel Mouse in X To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have FreeBSD 4.3 release running, and I JUST got KDE and XFree86 4.03 working. My problem is that I can't seem to find the right configuration for my mouse. Whenever I start X, my mouse goes haywire. It continuely tries to move to the top of the screen and stays there, and it is constantly sending a "click" signal to FreeBSD. I have a Logitech MouseMan Wheel PS/2 mouse. Is there a specific set of commands I need to send to moused? My XF86Config section for the mouse looks like this: # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "MouseMan" Option "Device" "/dev/psm0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice Option "ChordMiddle" EndSection ===== -- Jason La jasonla@pobox.com __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:48:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id DD1B037B401 for ; Mon, 18 Jun 2001 17:48:46 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5J0mg418057; Mon, 18 Jun 2001 20:48:42 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Mon, 18 Jun 2001 20:48:42 -0400 (EDT) From: Joe Clarke To: Cc: Subject: Re: Problems with Wheel Mouse in X In-Reply-To: <20010619003405.5960.qmail@web4601.mail.yahoo.com> Message-ID: <20010618204751.P14681-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Try: Section "InputDevice" # Identifier and driver Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" # Option "ZAxisMapping" "4 5" Option "Buttons" "5" Option "Resolution" "100" It works for me. I installed the imwheel port, and I've never had a problem with my wheeled mouse. The above assumes moused is running as follows: moused -z 4 -p /dev/psm0 -t auto Joe Clarke On Mon, 18 Jun 2001, Jason La wrote: > I have FreeBSD 4.3 release running, and I JUST got KDE and > XFree86 4.03 working. > > My problem is that I can't seem to find the right > configuration for my mouse. Whenever I start X, my mouse > goes haywire. It continuely tries to move to the top of the > screen and stays there, and it is constantly sending a > "click" signal to FreeBSD. > > I have a Logitech MouseMan Wheel PS/2 mouse. Is there a > specific set of commands I need to send to moused? My > XF86Config section for the mouse looks like this: > > # > ********************************************************************** > # Core Pointer's InputDevice section > # > ********************************************************************** > > Section "InputDevice" > > # Identifier and driver > > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "MouseMan" > Option "Device" "/dev/psm0" > > # When using XQUEUE, comment out the above two lines, and > uncomment > # the following line. > > # Option "Protocol" "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice. > In > # almost every case these lines should be omitted. > > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default > is 50ms) > > # Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > > # ChordMiddle is an option for some 3-button Logitech mice > > Option "ChordMiddle" > > EndSection > > ===== > -- Jason La > jasonla@pobox.com > > __________________________________________________ > Do You Yahoo!? > Spot the hottest trends in music, movies, and more. > http://buzz.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:52:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12003.mail.yahoo.com (web12003.mail.yahoo.com [216.136.172.211]) by hub.freebsd.org (Postfix) with SMTP id B578137B403 for ; Mon, 18 Jun 2001 17:52:17 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619005217.82184.qmail@web12003.mail.yahoo.com> Received: from [61.9.188.21] by web12003.mail.yahoo.com; Tue, 19 Jun 2001 10:52:17 EST Date: Tue, 19 Jun 2001 10:52:17 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: Re: can I tar and copy src & ports after cvsupping? To: Erik Trulsson Cc: fbsd In-Reply-To: <20010619014825.A45835@student.uu.se> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again all, I am cvsupping 4.2 to 4.3 and this happens after nearly compoleteing the ports tree... SNIP 8< ++++++++++++++++++++++++++++++++++ edit ports/www/jakarta-tomcat/distinfo add delta 1.2 2001.04.08.13.09.03 dirk updater failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: Cannot create: Not a directory +++++++++++++++++++++++++++++++++++++++++ Even if I cvsup again it fails at thesame point. I dont use jakarta (whatever it is) How can I get around this??? I am stuck (as usual) Also PAM in the src tree on re cvsupping claims to hav a bad checksum and retfetches...Hmmm yet again! Life wasn't meant to be easy I guess! Thanks heaps Keith _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:54:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.viasoft.com.cn (unknown [61.153.1.177]) by hub.freebsd.org (Postfix) with ESMTP id 2A0AE37B401 for ; Mon, 18 Jun 2001 17:54:26 -0700 (PDT) (envelope-from bsddiy@163.net) Received: from William ([192.168.1.98]) by mail.viasoft.com.cn (8.9.3/8.9.3) with ESMTP id IAA31512 for ; Tue, 19 Jun 2001 08:55:01 +0800 Date: Tue, 19 Jun 2001 09:07:16 +0800 From: David Xu X-Mailer: The Bat! (v1.48f) Personal Reply-To: bsddiy@163.net Organization: Viasoft X-Priority: 3 (Normal) Message-ID: <491028358.20010619090716@163.net> To: freebsd-questions@freebsd.org Subject: GCC 3.0 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I heard GCC 3.0 was released yesterday. will GCC 3.0 be in FreeBSD 4.4? -- Regards David Xu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:57: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12002.mail.yahoo.com (web12002.mail.yahoo.com [216.136.172.210]) by hub.freebsd.org (Postfix) with SMTP id C34EF37B401 for ; Mon, 18 Jun 2001 17:57:01 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619005701.94300.qmail@web12002.mail.yahoo.com> Received: from [61.9.188.21] by web12002.mail.yahoo.com; Tue, 19 Jun 2001 10:57:01 EST Date: Tue, 19 Jun 2001 10:57:01 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: cvs halted! cant create directory...help? To: fbsd MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG (oops sent it with wrong subject previously sorry) Hi again all, I am cvsupping 4.2 to 4.3 and this happens after nearly compoleteing the ports tree... SNIP 8< ++++++++++++++++++++++++++++++++++ edit ports/www/jakarta-tomcat/distinfo add delta 1.2 2001.04.08.13.09.03 dirk updater failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: Cannot create: Not a directory +++++++++++++++++++++++++++++++++++++++++ Even if I cvsup again it fails at thesame point. I dont use jakarta (whatever it is) How can I get around this??? I am stuck (as usual) Also PAM in the src tree on re cvsupping claims to hav a bad checksum and retfetches...Hmmm yet again! Life wasn't meant to be easy I guess! Thanks heaps Keith _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 17:58:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from xyzzy.intranet.snsonline.net (dhcp.looksmart.com.au [202.53.47.178]) by hub.freebsd.org (Postfix) with ESMTP id 70EBD37B401 for ; Mon, 18 Jun 2001 17:58:18 -0700 (PDT) (envelope-from msergeant@snsonline.net) Received: from xyzzy.intranet.snsonline.net (localhost [127.0.0.1]) by xyzzy.intranet.snsonline.net (8.11.4/8.11.3) with SMTP id f5J0vIs02822; Tue, 19 Jun 2001 10:57:19 +1000 (EST) (envelope-from msergeant@snsonline.net) Message-Id: <200106190057.f5J0vIs02822@xyzzy.intranet.snsonline.net> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 From: "Mark Sergeant" To: Keith Spencer , Erik Trulsson Cc: fbsd Subject: Re: can I tar and copy src & ports after cvsupping? X-Mailer: Pronto v2.2.5 On freebsd/mysql Date: 18 Jun 2001 19:57:17 EST Reply-To: "Mark Sergeant" In-Reply-To: <20010619005217.82184.qmail@web12003.mail.yahoo.com> References: <20010619005217.82184.qmail@web12003.mail.yahoo.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is in the archives. The easiest way to fix it is rm -rf /usr/ports/www/jakarta-tomcat Cheers, Mark On Tue, 19 Jun 2001 10:52:17 +1000 (EST), Keith Spencer said: > Hi again all, > I am cvsupping 4.2 to 4.3 and this happens after > nearly compoleteing the ports tree... > > SNIP 8< ++++++++++++++++++++++++++++++++++ > > edit ports/www/jakarta-tomcat/distinfo > add delta 1.2 2001.04.08.13.09.03 dirk > updater > failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: > Cannot create: Not a directory > > +++++++++++++++++++++++++++++++++++++++++ > Even if I cvsup again it fails at thesame point. > I dont use jakarta (whatever it is) How can I get > around this??? > I am stuck (as usual) > Also PAM in the src tree on re cvsupping claims to hav > a bad checksum and retfetches...Hmmm yet again! > Life wasn't meant to be easy I guess! > Thanks heaps > Keith Mark Sergeant Unix Systems Administrator Fortune follows... Never try to outstubborn a cat. -- Lazarus Long, "Time Enough for Love" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18: 0: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 0888737B401 for ; Mon, 18 Jun 2001 18:00:00 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5J100K18088; Mon, 18 Jun 2001 21:00:00 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Mon, 18 Jun 2001 21:00:00 -0400 (EDT) From: Joe Clarke To: =?iso-8859-1?q?Keith=20Spencer?= Cc: fbsd Subject: Re: cvs halted! cant create directory...help? In-Reply-To: <20010619005701.94300.qmail@web12002.mail.yahoo.com> Message-ID: <20010618205828.J14681-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You might want to search back through the freebsd-stable or -ports archives. This was a _big_ thread. I think there is now a patched version of cvsup, and also a workaround that involved deleting the jakarta directory, and all mention of it in /usr/sup/ports-www/checkouts.cvs:. Joe Clarke On Tue, 19 Jun 2001, [iso-8859-1] Keith Spencer wrote: > (oops sent it with wrong subject previously sorry) > Hi again all, > I am cvsupping 4.2 to 4.3 and this happens after > nearly compoleteing the ports tree... > > SNIP 8< ++++++++++++++++++++++++++++++++++ > > edit ports/www/jakarta-tomcat/distinfo > add delta 1.2 2001.04.08.13.09.03 dirk > updater > failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: > Cannot create: Not a directory > > +++++++++++++++++++++++++++++++++++++++++ > Even if I cvsup again it fails at thesame point. > I dont use jakarta (whatever it is) How can I get > around this??? > I am stuck (as usual) > Also PAM in the src tree on re cvsupping claims to hav > a bad checksum and retfetches...Hmmm yet again! > Life wasn't meant to be easy I guess! > Thanks heaps > Keith > > > > _____________________________________________________________________________ > http://messenger.yahoo.com.au - Yahoo! Messenger > - Voice chat, mail alerts, stock quotes and favourite news and lots more! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18: 1: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12005.mail.yahoo.com (web12005.mail.yahoo.com [216.136.172.213]) by hub.freebsd.org (Postfix) with SMTP id 3419E37B401 for ; Mon, 18 Jun 2001 18:00:53 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619010053.16731.qmail@web12005.mail.yahoo.com> Received: from [61.9.188.21] by web12005.mail.yahoo.com; Tue, 19 Jun 2001 11:00:53 EST Date: Tue, 19 Jun 2001 11:00:53 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: Re: can I tar and copy src & ports after cvsupping? To: Mark Sergeant , Erik Trulsson Cc: fbsd In-Reply-To: <200106190057.f5J0vIs02822@xyzzy.intranet.snsonline.net> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Mark and thanks... but how can I stop cvs from halting again and get it to work around the hassle? Or will what you say do that? Many thanks Keith --- Mark Sergeant wrote: > This is in the archives. The easiest way to fix it > is rm -rf > /usr/ports/www/jakarta-tomcat > > Cheers, > > Mark > > On Tue, 19 Jun 2001 10:52:17 +1000 (EST), Keith > Spencer said: > > > Hi again all, > > I am cvsupping 4.2 to 4.3 and this happens after > > nearly compoleteing the ports tree... > > > > SNIP 8< ++++++++++++++++++++++++++++++++++ > > > > edit ports/www/jakarta-tomcat/distinfo > > add delta 1.2 2001.04.08.13.09.03 dirk > > updater > > > failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: > > Cannot create: Not a directory > > > > +++++++++++++++++++++++++++++++++++++++++ > > Even if I cvsup again it fails at thesame point. > > I dont use jakarta (whatever it is) How can I get > > around this??? > > I am stuck (as usual) > > Also PAM in the src tree on re cvsupping claims > to hav > > a bad checksum and retfetches...Hmmm yet again! > > Life wasn't meant to be easy I guess! > > Thanks heaps > > Keith > > Mark Sergeant > Unix Systems Administrator > > Fortune follows... > > Never try to outstubborn a cat. > -- Lazarus Long, "Time Enough for Love" > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18: 2:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from xyzzy.intranet.snsonline.net (dhcp.looksmart.com.au [202.53.47.178]) by hub.freebsd.org (Postfix) with ESMTP id 39A2937B401 for ; Mon, 18 Jun 2001 18:02:27 -0700 (PDT) (envelope-from msergeant@snsonline.net) Received: from xyzzy.intranet.snsonline.net (localhost [127.0.0.1]) by xyzzy.intranet.snsonline.net (8.11.4/8.11.3) with SMTP id f5J12Ds02850; Tue, 19 Jun 2001 11:02:13 +1000 (EST) (envelope-from msergeant@snsonline.net) Message-Id: <200106190102.f5J12Ds02850@xyzzy.intranet.snsonline.net> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 From: "Mark Sergeant" To: Keith Spencer , Erik Trulsson Cc: fbsd Subject: Re: can I tar and copy src & ports after cvsupping? X-Mailer: Pronto v2.2.5 On freebsd/mysql Date: 18 Jun 2001 20:02:11 EST Reply-To: "Mark Sergeant" In-Reply-To: <20010619010053.16731.qmail@web12005.mail.yahoo.com> References: <20010619010053.16731.qmail@web12005.mail.yahoo.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you do the rm -rf it will then proceed. On Tue, 19 Jun 2001 11:00:53 +1000 (EST), Keith Spencer said: > Hi Mark and thanks... > but how can I stop cvs from halting again and get it > to work around the hassle? Or will what you say do > that? > Many thanks > Keith -- Mark Sergeant Unix Systems Administrator Fortune follows... If you didn't get caught, did you really do it? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18: 9:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pioneernet.net (mail.pioneernet.net [207.115.64.224]) by hub.freebsd.org (Postfix) with ESMTP id E287E37B401 for ; Mon, 18 Jun 2001 18:09:23 -0700 (PDT) (envelope-from chip@wiegand.org) Received: from wiegand.org [66.114.152.128] by pioneernet.net with ESMTP (SMTPD32-6.06) id A64A24D800F6; Mon, 18 Jun 2001 18:09:30 -0700 Message-ID: <3B2EA779.96DB4BF5@wiegand.org> Date: Mon, 18 Jun 2001 18:14:33 -0700 From: Chip X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Keith Spencer Cc: fbsd Subject: Re: cvs halted! cant create directory...help? References: <20010619005701.94300.qmail@web12002.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Keith Spencer wrote: > (oops sent it with wrong subject previously sorry) > Hi again all, > I am cvsupping 4.2 to 4.3 and this happens after > nearly compoleteing the ports tree... > > SNIP 8< ++++++++++++++++++++++++++++++++++ > > edit ports/www/jakarta-tomcat/distinfo > add delta 1.2 2001.04.08.13.09.03 dirk > updater > failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: > Cannot create: Not a directory > > +++++++++++++++++++++++++++++++++++++++++ > Even if I cvsup again it fails at thesame point. > I dont use jakarta (whatever it is) How can I get > around this??? > I am stuck (as usual) > I just created the directory it couldn't find, and it has worked fine since. -- Chip > Also PAM in the src tree on re cvsupping claims to hav > a bad checksum and retfetches...Hmmm yet again! > Life wasn't meant to be easy I guess! > Thanks heaps > Keith To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:14:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pioneernet.net (mail.pioneernet.net [207.115.64.224]) by hub.freebsd.org (Postfix) with ESMTP id 8DEDF37B403 for ; Mon, 18 Jun 2001 18:14:33 -0700 (PDT) (envelope-from chip@wiegand.org) Received: from wiegand.org [66.114.152.128] by pioneernet.net with ESMTP (SMTPD32-6.06) id A78077F01E6; Mon, 18 Jun 2001 18:14:40 -0700 Message-ID: <3B2EA8B0.2DA8B271@wiegand.org> Date: Mon, 18 Jun 2001 18:19:44 -0700 From: Chip X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Nick Rogness Cc: questions@FreeBSD.ORG Subject: Re: Natd Firewall port forwarding Router References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nick Rogness wrote: > On Sat, 16 Jun 2001, LeRoy wrote: > > > I would like to know is there any tutorials out there that have all > > three in one tutorial that will help me port forward, run natd and the > > firewall all on the same computer. > I have one also - www.wiegand.org -- Chip > > Maybe this might help you: > > http://freebsd.rogness.net/basic/nat.html > > Nick Rogness > - Keep on Routing in a Free World... > "FreeBSD: The Power to Serve!" > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Regards, -- Chip Wiegand CRW Computer Services www.wiegand.org chip@wiegand.org <------------------> Web page design Consulting PC Repair <------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:15: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id E825D37B409 for ; Mon, 18 Jun 2001 18:15:02 -0700 (PDT) (envelope-from leckert@neo.rr.com) Received: from neo.rr.com (m2-1a185.neo.rr.com [24.93.177.185]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5J1Bgs12895; Mon, 18 Jun 2001 21:11:43 -0400 (EDT) Message-ID: <3B2EA781.97C417BF@neo.rr.com> Date: Mon, 18 Jun 2001 21:14:41 -0400 From: leckert X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: shailesh sheoran Cc: FreeBSD-Questions Subject: Re: d-link 530TX + cards still dysfunctional References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG shailesh sheoran wrote: > > hi, > i am trying to setup 2 dlink dfe530tx+ cards on my PIII > 750MHz freebsd 4.3 Release system. > despite all efforts I still can't get them working. i have tried > looking for information everywhere but > the standard procedure of adding the lines > device miibus > device rl > isn't working for me. I know the card is not damaged because i can access > internet from windows98 but Freebsd still can't get the card working. > i am sure it should use the realtek 8139 driver because that's the > driver that came with the card too. (but there is no FreeBSD version of it > on the floppy, only linux and windows) I am using the D-Link DFE-530TX+ It is seen as rl0 miibus0 realtek 8139 driver I am using FreeBSD 4.3 I used the revision C version of the DFE, in the Black box. I bought a DFE 530TX+ in a silver box. On the card it said revision D. I put it in my machine, and it would not read the card. I pulled it out, robbed the 530TX+ out of my wife's M$ machine (which was a revision C-black box-, and it works just fine. I don't know the difference between the 530TX+ cards in the black box and the silver box, according to the floppy, both have the 8139 driver, but neither my Debian machine nor my FreeBSD machine would recognize the card from the silver and blue box with the man woman and child on the front. The card from the black box with the picture of the actual NIC on the front works just fine. -- kometboy kometboy@neo.rr.com (Debian GNU/Linux) leckert@neo.rr.com (FreeBSD) http://home.neo.rr.com/leckert To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:22: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 11B0237B403 for ; Mon, 18 Jun 2001 18:22:03 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 44474 invoked by uid 100); 19 Jun 2001 01:22:02 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15150.43322.143160.72054@guru.mired.org> Date: Mon, 18 Jun 2001 20:22:02 -0500 To: Philip Hallstrom Cc: Mike Meyer , Jonathan Slivko , Subject: Re: Digital Camera & FreeBSD 4.3 In-Reply-To: <20010618152529.C9218-100000@oddjob.adhesivemedia.com> References: <15150.28209.824830.995938@guru.mired.org> <20010618152529.C9218-100000@oddjob.adhesivemedia.com> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Philip Hallstrom types: > > There are USB readers/writers available for both SmartMedia and > > CompactFlash that use the USB protocols supported by the umass device, > Be careful which one you get however. I have the Sandisk SDDR-05 which > does not work (it's not actually a Sandisk, but some other party and due > to some licensing agreement no specs can be released). There's another > one, the SDDR-05a (I think) that looks the same and does work. Also the > SDDR-31 (I think, can't check at the moment) works as well. Right - you need one that supports the standard protocols, not something the manufacturer cons'ed up. The protocols are SCSI, UFI or 8070i (aka ATAPI) over CBI (with or without CCI) and BBB. The SDDR-31 is the one that works. The SanDisk SDDR-09 - which is a SmartMedia reader, not Compact Flash reader - doesn't work either. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:28:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swan.mail.pas.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 7B0D737B401 for ; Mon, 18 Jun 2001 18:28:49 -0700 (PDT) (envelope-from tyson@stanfordalumni.org) Received: from stanfordalumni.org (1Cust75.tnt9.tco2.da.uu.net [63.15.231.75]) by swan.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id SAA03845; Mon, 18 Jun 2001 18:27:22 -0700 (PDT) Message-Id: <200106190127.SAA03845@swan.mail.pas.earthlink.net> To: "Matthew Emmerton" Cc: "James Housley" , "shailesh sheoran" , "FreeBSD-Questions" From: Don Tyson Subject: Re: d-link 530TX + cards still dysfunctional In-reply-to: <002501c0f846$00efab40$1200a8c0@gsicomp.on.ca> References: <3B2E5FDB.B0EF367D@thehousleys.net> <002501c0f846$00efab40$1200a8c0@gsicomp.on.ca> Date: Mon, 18 Jun 2001 21:27:12 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > shailesh sheoran wrote: > > > > > > hi, > > > i am trying to setup 2 dlink dfe530tx+ cards on my PIII > > > 750MHz freebsd 4.3 Release system. > > > despite all efforts I still can't get them working. i have [snipped] > > > device miibus > > > device rl > > > isn't working for me. I know the card is not damaged because i can > access > > > internet from windows98 but Freebsd still can't get the card working. > > D-Link 530TX+ and 538TX cards are not supported in 4.3-RELEASE. Patches > supporting these cards have been sent to the rl driver maintainer by > multiple contributors (directly and via the FreeBSD PR mechanism) over the > past few months, and so far only the 530TX+ is supported in -CURRENT. > > -- > Matt Emmerton > I'm not sure I'm understanding this. I run 4.3-STABLE and have used a DFE-530TX+ card and the miibus and rl drivers for 8 months or so now (on previous -STABLE versions, obviously). Also, contrary to what one previous poster said, I have PnP enabled on my BIOS and it detects all of my hardware without difficulty. From my dmesg file: rl0: port 0xd400-0xd4ff mem 0xda000000-0xda0000ff irq 9 at device 11.0 on pci0 rl0: Ethernet address: 00:50:ba:8a:c1:9d miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Is this the same card you're talking about? Don Tyson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:45:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from deborah.paradise.net.nz (deborah.paradise.net.nz [203.96.152.32]) by hub.freebsd.org (Postfix) with ESMTP id 9176F37B401 for ; Mon, 18 Jun 2001 18:45:25 -0700 (PDT) (envelope-from rshea@thecubagroup.com) Received: from sheasili (203-79-72-40.cable.paradise.net.nz [203.79.72.40]) by deborah.paradise.net.nz (Postfix) with SMTP id CBFF11F9D54 for ; Tue, 19 Jun 2001 13:45:22 +1200 (NZST) From: "Richard Shea" To: questions@FreeBSD.ORG Date: Tue, 19 Jun 2001 13:43:58 +1200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: dump(8) -> Windows2000 Machine [was Re: Undelete?] Reply-To: rshea@thecubagroup.com In-reply-to: <20010618203507.H29910@sunbay.com> References: <000c01c0f818$a2c077c0$a3d70880@darkstar>; from bfoz@glue.umd.edu on Mon, Jun 18, 2001 at 01:03:45PM -0400 X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <20010619014522.CBFF11F9D54@deborah.paradise.net.nz> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > Is there any sort of undelete function? One single typo and I deleted > > the wrong directory. Next time I won't make directory names that are > > so close together. > > > Yes, it's called dump(8) and restore(8). > Discussing this has made me feel guilty about my rather haphazard backups... I've got a Windows2000 machine on the same LAN as my FreeBSD machine and I'd like to dump(8) to a disk on that machine (from there I can use a CD-burner). The man page for dump mentions that if I used host:file as a target I can backup to another machine. On the surface I might then think that : -f 192.168.10.2:C:\somedirectoryonwindows\ would work but ITRW I've got a feeling this _won't_ work ! As the resulting files will be quite large I don't just want to suck it and see. Is anyone out there "dump"ing to a non-Unix machine and willing to tell me how they do it ? BTW (just checking my reading of the man page) what I'd like to do is to arrange it so that dump produces files small enough to fit on a CD - I take it that -B 666000 would do that ? (where 666000 is size of a CD-R in bytes divided by 1024). Is there any benefit to using smaller files ? Any other gotchas I should watch out for ? thanks richard shea. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ The Cuba Group PO Box 1864 Wellington New Zealand PH +64 4 496 5205 MO +64 21 296 6839 FX +64 4 496 5209 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:50:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12004.mail.yahoo.com (web12004.mail.yahoo.com [216.136.172.212]) by hub.freebsd.org (Postfix) with SMTP id 2977E37B412 for ; Mon, 18 Jun 2001 18:50:55 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619015055.45806.qmail@web12004.mail.yahoo.com> Received: from [61.9.188.21] by web12004.mail.yahoo.com; Tue, 19 Jun 2001 11:50:55 EST Date: Tue, 19 Jun 2001 11:50:55 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: CVS- Pam <- Do I need it? It hangs cvs! To: fbsd MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again folks. Sorry to be pesky. I am desperately trying to CVSup but now PAM chacksums dont match and CVS refetches the file and pam_permit seems to hang on download. What is PAM. Does 4.2/4.3 by default use it/need it? Can I rm the directory from src and get around it? So many questions and so little time ;^) Thanks _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 18:53:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id 3358937B403 for ; Mon, 18 Jun 2001 18:53:40 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id C356D6ACC0; Tue, 19 Jun 2001 11:23:38 +0930 (CST) Date: Tue, 19 Jun 2001 11:23:38 +0930 From: Greg Lehey To: Drew Derbyshire Cc: Bill Moran , questions@FreeBSD.ORG Subject: Re: Stopping / removing vinum segments Message-ID: <20010619112338.C58585@wantadilla.lemis.com> References: <007701c0f6de$cef773b0$94cba8c0@xena> <3B2C2B84.8792D238@iowna.com> <000801c0f72b$f25931c0$94cba8c0@xena> <3B2CC068.2A0B6C01@iowna.com> <000801c0f748$ab47a880$94cba8c0@xena> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <000801c0f748$ab47a880$94cba8c0@xena>; from ahd@kew.com on Sun, Jun 17, 2001 at 12:15:04PM -0400 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday, 17 June 2001 at 12:15:04 -0400, Drew Derbyshire wrote: > On Sunday, June 17, 2001 10:36 AM, Bill Moran wrote: >> I'm a little confused here ... you state below that the system is idle >> and wrong. > > Understandable. > > The vinum volume was newly created. newfs had not yet been run. > Therefore, there was no data and the volume was not being used. So what was wrong about it? > The problem with resetconfig is, if I had another volume which WAS > live and active, the resetconfig would have smoked that as well. You shouldn't use resetconfig. Use commands like rm. So what did you want to do? What did try? What didn't work? Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 19:18:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from harrier.mail.pas.earthlink.net (harrier.mail.pas.earthlink.net [207.217.121.12]) by hub.freebsd.org (Postfix) with ESMTP id AA51B37B401 for ; Mon, 18 Jun 2001 19:18:51 -0700 (PDT) (envelope-from leemark@servesyndicate.com) Received: from leez12wqdmx2o3 (pool0812.cvx36-bradley.dialup.earthlink.net [216.244.21.47]) by harrier.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id TAA28489 for ; Mon, 18 Jun 2001 19:18:49 -0700 (PDT) Message-ID: <000c01c0f865$ee873e80$2f15f4d8@leez12wqdmx2o3> From: "Lee Mark Mercado" To: Subject: httpd error Date: Mon, 18 Jun 2001 19:17:02 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0009_01C0F82B.40D83FD0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0009_01C0F82B.40D83FD0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable im getting this error in my httpd-error.log: -------------------------------------------------------------------------= ------------------------------ [Mon Jun 18 19:15:55 2001] [error] [client 216.244.21.47] (13)Permission = denied: cannot read directory for multi: /usr/home/myuser/ -------------------------------------------------------------------------= ------------------------------ what does this error means ? i have all my /home/* directory permissions = to 711=20 pls help .. thx ------=_NextPart_000_0009_01C0F82B.40D83FD0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
im getting this error in my=20 httpd-error.log:
----------------------------------------------------------------= ---------------------------------------
[Mon Jun 18 19:15:55 2001] [error] = [client=20 216.244.21.47] (13)Permission denied: cannot read directory for = multi:=20 /usr/home/myuser/
----------------------------------------------------------------= ---------------------------------------
 
what does this error means ? i have all = my /home/*=20 directory permissions to 711
 
pls help .. = thx
------=_NextPart_000_0009_01C0F82B.40D83FD0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 19:22:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from Cherokee.geek.lan (chris.gintera.net [64.81.97.41]) by hub.freebsd.org (Postfix) with ESMTP id 46C6B37B408 for ; Mon, 18 Jun 2001 19:22:48 -0700 (PDT) (envelope-from rbg@gayteenresource.org) Received: from Cherokee.geek.lan (chris@localhost [127.0.0.1]) by Cherokee.geek.lan (8.11.3/8.11.2) with SMTP id f5J2MiY95324; Mon, 18 Jun 2001 20:22:44 -0600 (MDT) (envelope-from rbg@gayteenresource.org) Date: Mon, 18 Jun 2001 20:22:44 -0600 From: GTR Chris To: "Lee Mark Mercado" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: httpd error Message-Id: <20010618202244.0014ae0e.rbg@gayteenresource.org> In-Reply-To: <000c01c0f865$ee873e80$2f15f4d8@leez12wqdmx2o3> References: <000c01c0f865$ee873e80$2f15f4d8@leez12wqdmx2o3> Organization: GayTeenResources X-Mailer: Sylpheed version 0.4.99 (GTK+ 1.2.10; i386--freebsd4.3) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001 19:17:02 -0700, In reference to "httpd error", Lee Mark Mercado wrote: LM> what does this error means ? i have all my /home/* directory LM> permissions to 711 httpd doesn't have read permission to /usr/home/myuser 0711 allows only the owner of that particular directory to read anything in it. Change the permissions to that directory so that httpd can read it, and your errors should go away. -- Chris Founder, GayTeenResources http://www.gayteenresource.org/community/ "He who would have security over liberty deserves neither" 8:20PM up 2 days, 2:55, 8 users, load averages: 0.23, 0.14, 0.15 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 19:41:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cx952600-a.fed1.sdca.home.com (cx952600-a.fed1.sdca.home.com [24.4.92.198]) by hub.freebsd.org (Postfix) with ESMTP id E825837B401 for ; Mon, 18 Jun 2001 19:41:21 -0700 (PDT) (envelope-from snoonan@cx952600-a.fed1.sdca.home.com) Received: from azinger (azinger.noonans.com [192.168.1.6]) by cx952600-a.fed1.sdca.home.com (8.11.2/8.11.2) with SMTP id f5J2f6P00497; Mon, 18 Jun 2001 19:41:07 -0700 (PDT) (envelope-from snoonan@cx952600-a.fed1.sdca.home.com) From: Sean Noonan To: "Deakle, Jeff H." , Cc: "Lyons, Kevin C." Subject: RE: KVM switches Date: Mon, 18 Jun 2001 19:41:06 -0700 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_003C_01C0F82E.9DB32000" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_003C_01C0F82E.9DB32000 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit I use cheapo 4-port Linksys units at home and have no problems with either Windows or FreeBSD. I have had problems loosing keyboard and mouse control with several Belkin models. At work I use units from Rose Electronics (www.roseelectronics.com). I think they池e the best but very $$$$. -Sean Noonan -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff H. Sent: Monday, June 18, 2001 3:03 PM To: 'freebsd-questions@FreeBSD.ORG' Cc: Lyons, Kevin C. Subject: KVM switches Well after searching the questions here all I see is people having problems with their KVM switches. 'Has anyone had any luck with any of the switches on the market? If so could you let me know which one works with NT & FBSD? Thanks! Jeff Deakle Enercon Engineering, Inc. (281)721-4680 www.ener.com ------=_NextPart_000_003C_01C0F82E.9DB32000 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable KVM switches

I = use cheapo 4-port Linksys units at home and have no problems with either = Windows or FreeBSD.

 

I = have had problems loosing keyboard and mouse control with several Belkin = models.

 

At= work I use units from Rose Electronics (www.roseelectronics.com).  I think they’re the best = but very $$$$.

 

-S= ean Noonan

 

 

-----Original Message-----
From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff H.
Sent: Monday, June 18, = 2001 3:03 PM
To: = 'freebsd-questions@FreeBSD.ORG'
Cc: Lyons, Kevin C.
Subject: KVM = switches

 

Well after searching the questions here all I see is people = having problems with their KVM switches.  'Has anyone had any luck with = any of the switches on the market?  If so could you let me know which one = works with NT & FBSD?  <= /p>

Thanks! <= /p>

Jeff Deakle
Enercon Engineering, Inc.
(281)721-4680
www.ener.com

------=_NextPart_000_003C_01C0F82E.9DB32000-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 19:50:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts6-srv.bellnexxia.net (tomts6.bellnexxia.net [209.226.175.26]) by hub.freebsd.org (Postfix) with ESMTP id 7A38937B401 for ; Mon, 18 Jun 2001 19:50:56 -0700 (PDT) (envelope-from matt@gsicomp.on.ca) Received: from xena.gsicomp.on.ca ([64.228.154.141]) by tomts6-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010619025051.DAAZ29618.tomts6-srv.bellnexxia.net@xena.gsicomp.on.ca>; Mon, 18 Jun 2001 22:50:51 -0400 Received: from hermes (hermes.gsicomp.on.ca [192.168.0.18]) by xena.gsicomp.on.ca (8.11.1/8.11.1) with SMTP id f5J2mEN75224; Mon, 18 Jun 2001 22:48:14 -0400 (EDT) (envelope-from matt@gsicomp.on.ca) Message-ID: <004c01c0f869$b56a48f0$1200a8c0@gsicomp.on.ca> From: "Matthew Emmerton" To: "Don Tyson" Cc: "James Housley" , "shailesh sheoran" , "FreeBSD-Questions" , References: <3B2E5FDB.B0EF367D@thehousleys.net> <002501c0f846$00efab40$1200a8c0@gsicomp.on.ca> <200106190127.SAA03845@swan.mail.pas.earthlink.net> Subject: Re: d-link 530TX + cards still dysfunctional Date: Mon, 18 Jun 2001 22:44:04 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > > > hi, > > > > i am trying to setup 2 dlink dfe530tx+ cards on my PIII > > > > 750MHz freebsd 4.3 Release system. > > > > despite all efforts I still can't get them working. i have > > > > D-Link 530TX+ and 538TX cards are not supported in 4.3-RELEASE. Patches > > supporting these cards have been sent to the rl driver maintainer by > > multiple contributors (directly and via the FreeBSD PR mechanism) over the > > past few months, and so far only the 530TX+ is supported in -CURRENT. > > > > -- > > Matt Emmerton > > > I'm not sure I'm understanding this. I run 4.3-STABLE and have > used a DFE-530TX+ card and the miibus and rl drivers for 8 months > or so now (on previous -STABLE versions, obviously). > > >From my dmesg file: > > rl0: port 0xd400-0xd4ff mem 0xda000000-0xda0000ff irq 9 at device 11.0 on pci0 > rl0: Ethernet address: 00:50:ba:8a:c1:9d > miibus0: on rl0 > rlphy0: on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > Is this the same card you're talking about? Yes. Notice, however, that's its only being detected as a "Realtek 8139". It all depends on the revision of your 530TX+. Early revisions of the 530TX+ used RealTek's PCI vendor/device IDs, which is why your card is detected as a generic RealTek card. Later revisions used D-Link specific vendor/device IDs, and since the rl driver doesn't check for these (at least not in -STABLE), the card doesn't get detected. (According to another poster on this thread, Rev A/B/C cards exhibit the former behaviour, and Rev D cards exhibit the latter behaviour, as do the 538TX, which are just 530TX+ with WOL support.) Perhaps "not recognized" is a better term to use than "not supported". -- Matt Emmerton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 20: 0:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from headend.cablenet-va.com (headend.cablenet-va.com [208.197.246.195]) by hub.freebsd.org (Postfix) with ESMTP id 10D9237B403 for ; Mon, 18 Jun 2001 20:00:44 -0700 (PDT) (envelope-from peabody007@deepspacenine.com) Received: from stargate (leb-va-new-pc-192.cablenet-va.com [208.248.195.192]) by headend.cablenet-va.com (8.9.2/8.9.2) with SMTP id WAA03102 for ; Mon, 18 Jun 2001 22:53:40 -0400 (EDT) From: "Ben Compton" To: Subject: RE: KVM switches Date: Mon, 18 Jun 2001 23:00:58 -0400 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0033_01C0F84A.89AD05A0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0033_01C0F84A.89AD05A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit KVM switchesI've been using a Belkin OmniCube 4 port KVM for several months not and have had wonderful success....I bounce between an Win2k Workstation and FreeBSD box several times a day and have no problems with it. It provides keyboard emulation so you can boot up a machine when it is not selected. It also allows a keyboard shortcut (tapping the scroll-lock key twice followed by a number) to switch ports. I have found it very useful. It is not a high dollar item and would server your need quite well. If however you want to go VERY high dollar let me recommend Cybex....they make some killer KVM...remote capabilities over both modem and twisted pair, password protection of individual servers, as well as the ability to have multiple consoles in different areas each with its own setup....very sweet indeed =) -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Sean Noonan Sent: Monday, June 18, 2001 10:41 PM To: Deakle, Jeff H.; freebsd-questions@FreeBSD.ORG Cc: Lyons, Kevin C. Subject: RE: KVM switches I use cheapo 4-port Linksys units at home and have no problems with either Windows or FreeBSD. I have had problems loosing keyboard and mouse control with several Belkin models. At work I use units from Rose Electronics (www.roseelectronics.com). I think they池e the best but very $$$$. -Sean Noonan -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff H. Sent: Monday, June 18, 2001 3:03 PM To: 'freebsd-questions@FreeBSD.ORG' Cc: Lyons, Kevin C. Subject: KVM switches Well after searching the questions here all I see is people having problems with their KVM switches. 'Has anyone had any luck with any of the switches on the market? If so could you let me know which one works with NT & FBSD? Thanks! Jeff Deakle Enercon Engineering, Inc. (281)721-4680 www.ener.com ------=_NextPart_000_0033_01C0F84A.89AD05A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable KVM = switches
I've=20 been using a Belkin OmniCube 4 port KVM for several months not and have = had=20 wonderful success....I bounce between an Win2k Workstation and FreeBSD = box=20 several times a day and have no problems with it.  It provides = keyboard=20 emulation so you can boot up a machine when it is not selected.  It = also=20 allows a keyboard shortcut (tapping the scroll-lock key twice followed = by a=20 number) to switch ports.  I have found it very useful.  It is = not a=20 high dollar item and would server your need quite = well.
 
If=20 however you want to go VERY high dollar let me recommend Cybex....they = make some=20 killer KVM...remote capabilities over both modem and twisted pair, = password=20 protection of individual servers, as well as the ability to have = multiple=20 consoles in different areas each with its own setup....very sweet indeed = =3D)
 
 
-----Original Message-----
From:=20 owner-freebsd-questions@FreeBSD.ORG=20 [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Sean=20 Noonan
Sent: Monday, June 18, 2001 10:41 PM
To: = Deakle,=20 Jeff H.; freebsd-questions@FreeBSD.ORG
Cc: Lyons, Kevin=20 C.
Subject: RE: KVM switches

I use=20 cheapo 4-port Linksys units at home and have no problems with either = Windows=20 or FreeBSD.

 

I have=20 had problems loosing keyboard and mouse control with several Belkin=20 models.

 

At=20 work I use units from Rose Electronics (www.roseelectronics.com). =  I think they’re the = best but very=20 $$$$.

 

-Sean=20 Noonan

 

 

-----Original=20 Message-----
From:=20 owner-freebsd-questions@FreeBSD.ORG=20 [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff = H.
Sent: Monday, June 18, 2001 = 3:03=20 PM
To:=20 'freebsd-questions@FreeBSD.ORG'
Cc: Lyons, Kevin C.
Subject: KVM = switches

 

Well after searching the = questions here=20 all I see is people having problems with their KVM switches.  = 'Has anyone=20 had any luck with any of the switches on the market?  If so could = you let=20 me know which one works with NT & FBSD? 

Thanks!

Jeff Deakle
Enercon = Engineering,=20 Inc.=20
(281)721-4680
www.ener.com

------=_NextPart_000_0033_01C0F84A.89AD05A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 20: 1: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id A40E137B403 for ; Mon, 18 Jun 2001 20:01:02 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id 344396ACC2; Tue, 19 Jun 2001 11:54:09 +0930 (CST) Date: Tue, 19 Jun 2001 11:54:09 +0930 From: Greg Lehey To: Bill Schoolcraft Cc: FreeBSD Questions Subject: Re: digital camera Message-ID: <20010619115409.G58585@wantadilla.lemis.com> References: <20010518114030.J55915@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from bill@wiliweld.com on Mon, Jun 18, 2001 at 08:28:49AM -0700 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday, 18 June 2001 at 8:28:49 -0700, Bill Schoolcraft wrote: > At Fri, 18 May 2001 it looks like Greg Lehey composed: > > > GL-->There are various things in the Ports Collection. I personally use a > GL-->camera with Compact Flash memory (a Nikon CoolPix 880, which I quite > GL-->like). I insert the CF card into a PCMCIA adaptor and mount it on my > GL-->laptop as an MS-DOS file system. See > GL-->http://echunga.lemis.com/~grog/diary-nov2000.html, 10 November 2000, > GL-->for more details. > GL--> > GL-->Greg > > Hello Family, > > I was reading the examples at > http://echunga.lemis.com/~grog/diary-nov2000.html and noticed that > the compact flash card was mounted from /dev/ad6s1 and my devices > stop at /dev/ad3* Your "devices" in /dev are just files which tell userland programs how to access the hardware devices. You can create them or remove them at will. To create /dev/ad8s1, the one you want, do: # cd /dev # ./MAKEDEV ad8s1 > I'm using a Toshiba-1715xcds laptop. > > I'm also getting some action in /var/log/messages that's noticing > the card (I think) > > (each line seperated by space) > ########################################################### > Jun 18 07:14:39 laptop pccardd[52]: wi0: Lucent Technologies > (WaveLAN/IEEE) inserted. > > Jun 18 07:14:44 laptop pccardd[52]: Card "SunDisk"("SDP") [5/3 > 0.6] [(null)] matched "SunDisk" ("/.*/") [(null)] [(null)] > > Jun 18 07:14:49 laptop /kernel: ata4 at port 0x280-0x28f irq 5 > slot 1 on pccard1 > > Jun 18 07:14:59 laptop /kernel: ata4-master: > ata_command: timeout waiting for intr > > Jun 18 07:15:00 laptop /kernel: ata4-master: identify failed > > Jun 18 07:14:59 laptop pccardd[52]: ata4: SunDisk (/.*/) > inserted. > > Jun 18 07:14:59 laptop pccardd[52]: pccardd started > ########################################################## OK, this looks like irq 5 is already in use for something else. This is a relatively common. You need to find out which IRQs are free, and which don't conflict with your Orinoco card. > Now this is a triple booted laptop and I've confirmed that the > SanDisk, CompactFlash PC Card Holder works with Linux, Great. You're more than half way there. > Windows_ME and now the final hurdle is FreeBSD. OK, take a look at the IRQs that Linux assigns to the Orinoco and the CF card. You can then create or change your /etc/pccard.conf to include the lines (these are in /etc/defaults/pccard.conf): # Generally available IRQs (Built-in sound-card owners remove 5) irq 3 5 10 11 13 15 Note the comment; I don't trust it too much, but it could be the sound card conflicting. Change the IRQs to include only the IRQs the system uses in Linux. Restart pccardd. That may be all you need to do. If not, come back and we'll continue. > When setting up my wirless Orinoco card FreeBSD was by far the > easiest, with Linux second (recompile kernel) This relates to my experience. I've spent some time on this issue with Debian in the last couple of days. A whole lot of us OzLabs people got the same new laptop and wireless card. It worked out of the box in FreeBSD, but Debian didn't have the module needed, so it needed to be compiled. I don't think you need to build a new Linux kernel. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 20:10:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from spyder.bytecraft.au.com (bytecr1.lnk.telstra.net [139.130.142.13]) by hub.freebsd.org (Postfix) with ESMTP id 7511037B403 for ; Mon, 18 Jun 2001 20:10:12 -0700 (PDT) (envelope-from taylorm@bytecraft.au.com) Received: by spyder.bytecraft.au.com (Postfix, from userid 1001) id DF4E3BA80; Tue, 19 Jun 2001 13:10:10 +1000 (EST) Date: Tue, 19 Jun 2001 13:10:10 +1000 From: Murray Taylor To: Odhiambo Washington , freebsd-questions@freebsd.org Cc: User Taylorm Subject: Tk graphing (was Re: How to create a script to shutdown the ppp connection) Message-ID: <20010619131010.A87900@spyder.bytecraft.au.com> References: <5.1.0.14.0.20010618090822.030d66b0@postoffice.riic.at> <20010618085956.055DABA80@spyder.bytecraft.au.com> <20010618121725.D76134@everest.wananchi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010618121725.D76134@everest.wananchi.com>; from wash@wananchi.com on Mon, Jun 18, 2001 at 12:17:25PM +0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yup .. i will upload it to freebsd-questions with some annotations in a coupla days ... (i'm between cities and servers until the weekend) cheers mjt On Mon, Jun 18, 2001 at 12:17:25PM +0300, Odhiambo Washington wrote: > * User Taylorm [20010618 11:58]: writing on the subject 'Re: How to create a script to shutdown the ppp connection' > User> man netstat especially the -bdn and -w options > User> btw I have a Tk script that draws a nice graph updating every 10 seconds or so > > That is for monitoring your ppp session? Do you mind sharing?? > > > -Wash > > -- > Odhiambo Washington > Wananchi Online Ltd., > wash@wananchi.com 1st Flr Loita Hse. > Tel: 254 2 313985 Loita Street., > Fax: 254 2 313922 PO Box 10286,00100-NAIROBI,KE. > > Even God cannot change the past. > -Agathon > (contributed by Chris Johnston) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 20:38:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.9.37.251]) by hub.freebsd.org (Postfix) with ESMTP id CEBBA37B406 for ; Mon, 18 Jun 2001 20:38:13 -0700 (PDT) (envelope-from imush@mail.ru) Received: from omsk.mushinsky.net (itz@localhost [127.0.0.1]) by omsk.mushinsky.net (8.11.3/8.11.1) with SMTP id f5J3b7W52222 for ; Mon, 18 Jun 2001 23:37:07 -0400 (EDT) (envelope-from imush@mail.ru) Content-Type: text/plain; charset="koi8-r" From: Isaac Mushinsky To: "freebsd-questions" Subject: How to allow users to mount floppy, cdrom, etc Date: Mon, 18 Jun 2001 23:37:07 -0400 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <01061823370702.50590@omsk.mushinsky.net> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What is the most efficient way to do this? The mount points have all the permissions, yet users are not allowed to=20 mount. Do I change the device permissions directly? To what? This concerns a cdrom, a floppy and a backup storage hard drive. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:10:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.sfu.ca (cs.sfu.ca [142.58.111.1]) by hub.freebsd.org (Postfix) with ESMTP id 716B837B401 for ; Mon, 18 Jun 2001 21:10:05 -0700 (PDT) (envelope-from mcneney@cs.sfu.ca) Received: from smahlt.math.sfu.ca (smahlt [199.60.17.25]) by cs.sfu.ca (8.9.1/8.9.1) with ESMTP id VAA16283 for ; Mon, 18 Jun 2001 21:10:05 -0700 (PDT) Received: from localhost by smahlt.math.sfu.ca (8.8.8/1.1.20.8/23Nov99-0751PM) id VAA0000010408; Mon, 18 Jun 2001 21:10:04 -0700 (PDT) X-Authentication-Warning: smahlt.math.sfu.ca: mcneney owned process doing -bs Date: Mon, 18 Jun 2001 21:10:04 -0700 (PDT) From: Brad McNeney X-Sender: mcneney@smahlt.math.sfu.ca To: questions@FreeBSD.org Subject: trouble exporting fs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm having trouble exporting a filesystem on from a machine running FreeBSD 4.3-STABLE to a Linux machine (RedHat 6.2). The FreeBSD computer has 2 NICs. The external is connected to a cable modem and the internal to a hub on a LAN with network addresses 192.168.100.xxx. The computer I want to export to has IP 192.168.100.200 The relevant part of dmesg (full output clipped below) reads: Starting final network daemons: mountd Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200 My /etc/exports file has just the one line: /home 192.168.100.200 Output from netstat -rn: Routing tables Internet: Destination Gateway Flags Netif Expire default 24.113.160.1 UGSc dc0 24.113.160/22 link#1 UC dc0 => 127.0.0.1 127.0.0.1 UH lo0 192.168.100 link#2 UC ed0 => Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%dc0/64 link#1 UC dc0 fe80::%ed0/64 link#2 UC ed0 fESG::%lo0/64 fe80::1%lo0 Uc lo0 ff01::/32 ::1 U lo0 ff02::%dc0/32 link#1 UC dc0 ff02::%ed0/32 link#2 UC ed0 ff02::%lo0/32 fe80::1%lo0 UC lo0 Any ideas on what I'm doing wrong? Brad ----------------------------------------------------------------------- Full output from dmesg: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Sun Jun 17 17:04:22 PDT 2001 root@cr269907-a.poco1.bc.wave.home.com:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff real memory = 536854528 (524272K bytes) config> di pcic0 config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> en pcic1 config> po pcic1 0x3e2 config> ir pcic1 11 config> iom pcic1 0xd4000 config> f pcic1 0 config> q avail memory = 518311936 (506164K bytes) Preloaded elf kernel "kernel" at 0xc0459000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc045909c. Preloaded elf module "splash_bmp.ko" at 0xc04590ec. Pentium Pro MTRR support enabled md0: Malloc disk module_register_init: MOD_LOAD (splash_bmp, c0454798, 0) error 2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 9 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xd400-0xd41f irq 10 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 10 at device 4.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered dc0: port 0xb800-0xb8ff mem 0xf7800000-0xf78000ff irq 5 at device 9.0 on pci0 dc0: Ethernet address: 00:80:c6:f9:c3:83 miibus0: on dc0 dcphy0: on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ed0: port 0xb400-0xb41f irq 11 at device 11.0 on pci0 ed0: address 00:60:67:3b:de:ef, type NE2000 (16 bit) pcib1: on motherboard pci2: on pcib1 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model 4D Mouse, device ID 6 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP Probing for PnP devices on ppbus0: ppbus0: PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ad0: 14655MB [29777/16/63] at ata0-master UDMA66 acd0: CDROM at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s1a swapon: adding /dev/ad0s1b as swap device Automatic boot in progress... /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 10754 free (346 frags, 1301 blocks, 0.7% fragmentation) /dev/ad0s1g: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1g: clean, 7484077 free (581 frags, 935437 blocks, 0.0% fragmentation) /dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1f: clean, 3721191 free (51167 frags, 458753 blocks, 0.9% fragmentation) /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 3037 free (61 frags, 372 blocks, 0.3% fragmentation) Doing initial network setup: hostname . dc0: flags=8843 mtu 1500 inet 24.113.163.96 netmask 0xfffffc00 broadcast 24.113.163.255 inet6 fe80::280:c6ff:fef9:c383%dc0 prefixlen 64 tentative scopeid 0x1 ether 00:80:c6:f9:c3:83 media: autoselect (none) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX none ed0: flags=8843 mtu 1500 inet 192.168.100.100 netmask 0xffffff00 broadcast 192.168.100.255 inet6 fe80::260:67ff:fe3b:deef%ed0 prefixlen 64 tentative scopeid 0x2 ether 00:60:67:3b:de:ef lo0: flags=8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 24.113.160.1 Additional routing options: TCP keepalive=YES . Routing daemons: . Additional daemons: syslogd . Doing additional network setup: portmap . Starting final network daemons: mountd Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200 nfsd rpc.statd . ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting standard daemons: inetd cron sendmail . Jun 18 20:51:37 cr269907-a sendmail[197]: f5J30aE44624: SYSERR(root): Cannot open hash database /etc/mail/aliases.db: Inappropriate file type or format Initial rc.i386 initialization: . Configuring syscons: blank_time screensaver moused . Additional ABI support: linux . Local package initialization: apache mysql . Additional TCP options: . Mon Jun 18 20:51:43 PDT 2001 kill: 45246 : No such process Jun 18 20:52:10 cr269907-a login: ROOT LOGIN (root) ON ttyv0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:15:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id BADD737B406 for ; Mon, 18 Jun 2001 21:15:02 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5J4EXr28392; Tue, 19 Jun 2001 00:14:33 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 00:14:33 -0400 (EDT) From: Joe Clarke To: Brad McNeney Cc: Subject: Re: trouble exporting fs In-Reply-To: Message-ID: <20010619001213.G14681-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is /home a mounted partition? You should specify mounted partitions only in /etc/exports. If your client needs to mount subdirectories on the partition, consider the following: /usr /usr/home 192.168.100.200 Then, the client can mount /usr/home on /home. Joe Clarke On Mon, 18 Jun 2001, Brad McNeney wrote: > > I'm having trouble exporting a filesystem on from a machine > running FreeBSD 4.3-STABLE to a Linux machine (RedHat 6.2). > The FreeBSD computer has 2 NICs. The external is connected to a > cable modem and the internal to a hub on a LAN with network addresses > 192.168.100.xxx. The computer I want to export to has IP 192.168.100.200 > > The relevant part of dmesg (full output clipped below) reads: > Starting final network daemons: > mountd > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home > 192.168.100.200 > > My /etc/exports file has just the one line: > > /home 192.168.100.200 > > > Output from netstat -rn: > > Routing tables > > Internet: > Destination Gateway Flags Netif Expire > default 24.113.160.1 UGSc dc0 > 24.113.160/22 link#1 UC dc0 => > 127.0.0.1 127.0.0.1 UH lo0 > 192.168.100 link#2 UC ed0 => > > Internet6: > Destination Gateway Flags Netif Expire > ::1 ::1 UH lo0 > fe80::%dc0/64 link#1 UC dc0 > fe80::%ed0/64 link#2 UC ed0 > fESG::%lo0/64 fe80::1%lo0 Uc lo0 > ff01::/32 ::1 U lo0 > ff02::%dc0/32 link#1 UC dc0 > ff02::%ed0/32 link#2 UC ed0 > ff02::%lo0/32 fe80::1%lo0 UC lo0 > > > Any ideas on what I'm doing wrong? > > Brad > > ----------------------------------------------------------------------- > Full output from dmesg: > > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.3-STABLE #0: Sun Jun 17 17:04:22 PDT 2001 > root@cr269907-a.poco1.bc.wave.home.com:/usr/obj/usr/src/sys/MYKERNEL > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > Features=0x383f9ff > real memory = 536854528 (524272K bytes) > config> di pcic0 > config> di sn0 > config> di lnc0 > config> di ie0 > config> di fe0 > config> di ed0 > config> di cs0 > config> en pcic1 > config> po pcic1 0x3e2 > config> ir pcic1 11 > config> iom pcic1 0xd4000 > config> f pcic1 0 > config> q > avail memory = 518311936 (506164K bytes) > Preloaded elf kernel "kernel" at 0xc0459000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc045909c. > Preloaded elf module "splash_bmp.ko" at 0xc04590ec. > Pentium Pro MTRR support enabled > md0: Malloc disk > module_register_init: MOD_LOAD (splash_bmp, c0454798, 0) error 2 > npx0: on motherboard > npx0: INT 16 interface > pcib0: on motherboard > pci0: on pcib0 > pcib2: at device 1.0 on pci0 > pci1: on pcib2 > pci1: at 0.0 irq 9 > isab0: at device 4.0 on pci0 > isa0: on isab0 > atapci0: port 0xd800-0xd80f at device 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: port 0xd400-0xd41f irq 10 at device 4.2 on pci0 > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0xd000-0xd01f irq 10 at device 4.3 on pci0 > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > dc0: port 0xb800-0xb8ff mem 0xf7800000-0xf78000ff irq 5 at device 9.0 on pci0 > dc0: Ethernet address: 00:80:c6:f9:c3:83 > miibus0: on dc0 > dcphy0: on miibus0 > dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ed0: port 0xb400-0xb41f irq 11 at device 11.0 on pci0 > ed0: address 00:60:67:3b:de:ef, type NE2000 (16 bit) > pcib1: on motherboard > pci2: on pcib1 > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: at port 0x60,0x64 on isa0 > atkbd0: flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model 4D Mouse, device ID 6 > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP > Probing for PnP devices on ppbus0: > ppbus0: PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > ad0: 14655MB [29777/16/63] at ata0-master UDMA66 > acd0: CDROM at ata1-slave using PIO4 > Mounting root from ufs:/dev/ad0s1a > swapon: adding /dev/ad0s1b as swap device > Automatic boot in progress... > /dev/ad0s1a: > FILESYSTEM CLEAN; SKIPPING CHECKS > /dev/ad0s1a: > clean, 10754 free > (346 frags, 1301 blocks, 0.7% fragmentation) > /dev/ad0s1g: > FILESYSTEM CLEAN; SKIPPING CHECKS > /dev/ad0s1g: > clean, 7484077 free > (581 frags, 935437 blocks, 0.0% fragmentation) > /dev/ad0s1f: > FILESYSTEM CLEAN; SKIPPING CHECKS > /dev/ad0s1f: > clean, 3721191 free > (51167 frags, 458753 blocks, 0.9% fragmentation) > /dev/ad0s1e: > FILESYSTEM CLEAN; SKIPPING CHECKS > /dev/ad0s1e: > clean, 3037 free > (61 frags, 372 blocks, 0.3% fragmentation) > Doing initial network setup: > hostname > . > dc0: flags=8843 mtu 1500 > inet 24.113.163.96 netmask 0xfffffc00 broadcast 24.113.163.255 > inet6 fe80::280:c6ff:fef9:c383%dc0 prefixlen 64 tentative scopeid 0x1 > ether 00:80:c6:f9:c3:83 > media: autoselect (none) status: active > supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX none > ed0: flags=8843 mtu 1500 > inet 192.168.100.100 netmask 0xffffff00 broadcast 192.168.100.255 > inet6 fe80::260:67ff:fe3b:deef%ed0 prefixlen 64 tentative scopeid 0x2 > ether 00:60:67:3b:de:ef > lo0: flags=8049 mtu 16384 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9 > inet6 ::1 prefixlen 128 > inet 127.0.0.1 netmask 0xff000000 > add net default: gateway 24.113.160.1 > Additional routing options: > TCP keepalive=YES > . > Routing daemons: > . > Additional daemons: > syslogd > . > Doing additional network setup: > portmap > . > Starting final network daemons: > mountd > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200 > nfsd > rpc.statd > . > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout > Starting standard daemons: > inetd > cron > sendmail > . > Jun 18 20:51:37 cr269907-a sendmail[197]: f5J30aE44624: SYSERR(root): Cannot open hash database /etc/mail/aliases.db: Inappropriate file type or format > Initial rc.i386 initialization: > . > Configuring syscons: > blank_time > screensaver > moused > . > Additional ABI support: > linux > . > Local package initialization: > apache > mysql > . > Additional TCP options: > . > > Mon Jun 18 20:51:43 PDT 2001 > kill: > 45246 > : > No such process > Jun 18 20:52:10 cr269907-a login: ROOT LOGIN (root) ON ttyv0 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:15:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tao.thought.org (sense-kline-248.oz.net [216.39.168.248]) by hub.freebsd.org (Postfix) with ESMTP id 451DE37B401 for ; Mon, 18 Jun 2001 21:15:22 -0700 (PDT) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.11.3/8.11.0) id f5J4FDr49011; Mon, 18 Jun 2001 21:15:13 -0700 (PDT) (envelope-from kline) Date: Mon, 18 Jun 2001 21:14:57 -0700 From: Gary Kline To: Isaac Mushinsky Cc: freebsd-questions Subject: Re: How to allow users to mount floppy, cdrom, etc Message-ID: <20010618211457.A48982@tao.thought.org> References: <01061823370702.50590@omsk.mushinsky.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <01061823370702.50590@omsk.mushinsky.net>; from imush@mail.ru on Mon, Jun 18, 2001 at 11:37:07PM -0400 X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: Observing 15 years of service to the Unix community Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Jun 18, 2001 at 11:37:07PM -0400, Isaac Mushinsky wrote: > What is the most efficient way to do this? > The mount points have all the permissions, yet users are not allowed to > mount. Do I change the device permissions directly? To what? > > This concerns a cdrom, a floppy and a backup storage hard drive. > This may help. From 15jun01: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#USER-FLOPPYMOUNT -- Gary D. Kline kline@thought.org www.thought.org Public service Unix To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:20:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.sfu.ca (cs.sfu.ca [142.58.111.1]) by hub.freebsd.org (Postfix) with ESMTP id 2557B37B40A for ; Mon, 18 Jun 2001 21:20:40 -0700 (PDT) (envelope-from mcneney@cs.sfu.ca) Received: from smahlt.math.sfu.ca (smahlt [199.60.17.25]) by cs.sfu.ca (8.9.1/8.9.1) with ESMTP id VAA16933; Mon, 18 Jun 2001 21:20:40 -0700 (PDT) Received: from localhost by smahlt.math.sfu.ca (8.8.8/1.1.20.8/23Nov99-0751PM) id VAA0000010449; Mon, 18 Jun 2001 21:20:39 -0700 (PDT) X-Authentication-Warning: smahlt.math.sfu.ca: mcneney owned process doing -bs Date: Mon, 18 Jun 2001 21:20:39 -0700 (PDT) From: Brad McNeney X-Sender: mcneney@smahlt.math.sfu.ca To: Joe Clarke Cc: questions@FreeBSD.ORG Subject: Re: trouble exporting fs In-Reply-To: <20010619001213.G14681-100000@shumai.marcuscom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yes, /home is a mounted partition: cr269907-a% df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad0s1a 49583 38838 6779 85% / /dev/ad0s1g 7496178 12110 6884374 0% /home /dev/ad0s1f 5954477 2233286 3244833 41% /usr /dev/ad0s1e 19815 16767 1463 92% /var procfs 4 4 0 100% /proc On Tue, 19 Jun 2001, Joe Clarke wrote: > Is /home a mounted partition? You should specify mounted partitions only > in /etc/exports. If your client needs to mount subdirectories on the > partition, consider the following: > > /usr /usr/home 192.168.100.200 > > Then, the client can mount /usr/home on /home. > > Joe Clarke > > On Mon, 18 Jun 2001, Brad McNeney wrote: > > > > > I'm having trouble exporting a filesystem on from a machine > > running FreeBSD 4.3-STABLE to a Linux machine (RedHat 6.2). > > The FreeBSD computer has 2 NICs. The external is connected to a > > cable modem and the internal to a hub on a LAN with network addresses > > 192.168.100.xxx. The computer I want to export to has IP 192.168.100.200 > > > > The relevant part of dmesg (full output clipped below) reads: > > Starting final network daemons: > > mountd > > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home > > 192.168.100.200 > > > > My /etc/exports file has just the one line: > > > > /home 192.168.100.200 > > > > > > Output from netstat -rn: > > > > Routing tables > > > > Internet: > > Destination Gateway Flags Netif Expire > > default 24.113.160.1 UGSc dc0 > > 24.113.160/22 link#1 UC dc0 => > > 127.0.0.1 127.0.0.1 UH lo0 > > 192.168.100 link#2 UC ed0 => > > > > Internet6: > > Destination Gateway Flags Netif Expire > > ::1 ::1 UH lo0 > > fe80::%dc0/64 link#1 UC dc0 > > fe80::%ed0/64 link#2 UC ed0 > > fESG::%lo0/64 fe80::1%lo0 Uc lo0 > > ff01::/32 ::1 U lo0 > > ff02::%dc0/32 link#1 UC dc0 > > ff02::%ed0/32 link#2 UC ed0 > > ff02::%lo0/32 fe80::1%lo0 UC lo0 > > > > > > Any ideas on what I'm doing wrong? > > > > Brad > > > > ----------------------------------------------------------------------- > > Full output from dmesg: > > > > Copyright (c) 1992-2001 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 4.3-STABLE #0: Sun Jun 17 17:04:22 PDT 2001 > > root@cr269907-a.poco1.bc.wave.home.com:/usr/obj/usr/src/sys/MYKERNEL > > Timecounter "i8254" frequency 1193182 Hz > > CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff > > real memory = 536854528 (524272K bytes) > > config> di pcic0 > > config> di sn0 > > config> di lnc0 > > config> di ie0 > > config> di fe0 > > config> di ed0 > > config> di cs0 > > config> en pcic1 > > config> po pcic1 0x3e2 > > config> ir pcic1 11 > > config> iom pcic1 0xd4000 > > config> f pcic1 0 > > config> q > > avail memory = 518311936 (506164K bytes) > > Preloaded elf kernel "kernel" at 0xc0459000. > > Preloaded userconfig_script "/boot/kernel.conf" at 0xc045909c. > > Preloaded elf module "splash_bmp.ko" at 0xc04590ec. > > Pentium Pro MTRR support enabled > > md0: Malloc disk > > module_register_init: MOD_LOAD (splash_bmp, c0454798, 0) error 2 > > npx0: on motherboard > > npx0: INT 16 interface > > pcib0: on motherboard > > pci0: on pcib0 > > pcib2: at device 1.0 on pci0 > > pci1: on pcib2 > > pci1: at 0.0 irq 9 > > isab0: at device 4.0 on pci0 > > isa0: on isab0 > > atapci0: port 0xd800-0xd80f at device 4.1 on pci0 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > uhci0: port 0xd400-0xd41f irq 10 at device 4.2 on pci0 > > usb0: on uhci0 > > usb0: USB revision 1.0 > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: port 0xd000-0xd01f irq 10 at device 4.3 on pci0 > > usb1: on uhci1 > > usb1: USB revision 1.0 > > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > > dc0: port 0xb800-0xb8ff mem 0xf7800000-0xf78000ff irq 5 at device 9.0 on pci0 > > dc0: Ethernet address: 00:80:c6:f9:c3:83 > > miibus0: on dc0 > > dcphy0: on miibus0 > > dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > ed0: port 0xb400-0xb41f irq 11 at device 11.0 on pci0 > > ed0: address 00:60:67:3b:de:ef, type NE2000 (16 bit) > > pcib1: on motherboard > > pci2: on pcib1 > > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: at port 0x60,0x64 on isa0 > > atkbd0: flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: irq 12 on atkbdc0 > > psm0: model 4D Mouse, device ID 6 > > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > sc0: at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > ppc0: at port 0x378-0x37f irq 7 on isa0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/8 bytes threshold > > ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP > > Probing for PnP devices on ppbus0: > > ppbus0: PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL > > plip0: on ppbus0 > > lpt0: on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: on ppbus0 > > ad0: 14655MB [29777/16/63] at ata0-master UDMA66 > > acd0: CDROM at ata1-slave using PIO4 > > Mounting root from ufs:/dev/ad0s1a > > swapon: adding /dev/ad0s1b as swap device > > Automatic boot in progress... > > /dev/ad0s1a: > > FILESYSTEM CLEAN; SKIPPING CHECKS > > /dev/ad0s1a: > > clean, 10754 free > > (346 frags, 1301 blocks, 0.7% fragmentation) > > /dev/ad0s1g: > > FILESYSTEM CLEAN; SKIPPING CHECKS > > /dev/ad0s1g: > > clean, 7484077 free > > (581 frags, 935437 blocks, 0.0% fragmentation) > > /dev/ad0s1f: > > FILESYSTEM CLEAN; SKIPPING CHECKS > > /dev/ad0s1f: > > clean, 3721191 free > > (51167 frags, 458753 blocks, 0.9% fragmentation) > > /dev/ad0s1e: > > FILESYSTEM CLEAN; SKIPPING CHECKS > > /dev/ad0s1e: > > clean, 3037 free > > (61 frags, 372 blocks, 0.3% fragmentation) > > Doing initial network setup: > > hostname > > . > > dc0: flags=8843 mtu 1500 > > inet 24.113.163.96 netmask 0xfffffc00 broadcast 24.113.163.255 > > inet6 fe80::280:c6ff:fef9:c383%dc0 prefixlen 64 tentative scopeid 0x1 > > ether 00:80:c6:f9:c3:83 > > media: autoselect (none) status: active > > supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX none > > ed0: flags=8843 mtu 1500 > > inet 192.168.100.100 netmask 0xffffff00 broadcast 192.168.100.255 > > inet6 fe80::260:67ff:fe3b:deef%ed0 prefixlen 64 tentative scopeid 0x2 > > ether 00:60:67:3b:de:ef > > lo0: flags=8049 mtu 16384 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9 > > inet6 ::1 prefixlen 128 > > inet 127.0.0.1 netmask 0xff000000 > > add net default: gateway 24.113.160.1 > > Additional routing options: > > TCP keepalive=YES > > . > > Routing daemons: > > . > > Additional daemons: > > syslogd > > . > > Doing additional network setup: > > portmap > > . > > Starting final network daemons: > > mountd > > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200 > > nfsd > > rpc.statd > > . > > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout > > Starting standard daemons: > > inetd > > cron > > sendmail > > . > > Jun 18 20:51:37 cr269907-a sendmail[197]: f5J30aE44624: SYSERR(root): Cannot open hash database /etc/mail/aliases.db: Inappropriate file type or format > > Initial rc.i386 initialization: > > . > > Configuring syscons: > > blank_time > > screensaver > > moused > > . > > Additional ABI support: > > linux > > . > > Local package initialization: > > apache > > mysql > > . > > Additional TCP options: > > . > > > > Mon Jun 18 20:51:43 PDT 2001 > > kill: > > 45246 > > : > > No such process > > Jun 18 20:52:10 cr269907-a login: ROOT LOGIN (root) ON ttyv0 > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:24:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 8D89537B406 for ; Mon, 18 Jun 2001 21:24:33 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5J4O5m88007; Tue, 19 Jun 2001 00:24:05 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 00:24:05 -0400 (EDT) From: Joe Clarke To: Brad McNeney Cc: Subject: Re: trouble exporting fs In-Reply-To: Message-ID: <20010619002315.K14681-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You may want to look at /etc/exports in vi, then. See if it's been DOS formatted, and has ^M's at the end of each line. If so, you should clean it up to make it a UNIX text file. Joe Clarke On Mon, 18 Jun 2001, Brad McNeney wrote: > Yes, /home is a mounted partition: > > cr269907-a% df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/ad0s1a 49583 38838 6779 85% / > /dev/ad0s1g 7496178 12110 6884374 0% /home > /dev/ad0s1f 5954477 2233286 3244833 41% /usr > /dev/ad0s1e 19815 16767 1463 92% /var > procfs 4 4 0 100% /proc > > On Tue, 19 Jun 2001, Joe Clarke wrote: > > > Is /home a mounted partition? You should specify mounted partitions only > > in /etc/exports. If your client needs to mount subdirectories on the > > partition, consider the following: > > > > /usr /usr/home 192.168.100.200 > > > > Then, the client can mount /usr/home on /home. > > > > Joe Clarke > > > > On Mon, 18 Jun 2001, Brad McNeney wrote: > > > > > > > > I'm having trouble exporting a filesystem on from a machine > > > running FreeBSD 4.3-STABLE to a Linux machine (RedHat 6.2). > > > The FreeBSD computer has 2 NICs. The external is connected to a > > > cable modem and the internal to a hub on a LAN with network addresses > > > 192.168.100.xxx. The computer I want to export to has IP 192.168.100.200 > > > > > > The relevant part of dmesg (full output clipped below) reads: > > > Starting final network daemons: > > > mountd > > > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > > > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home > > > 192.168.100.200 > > > > > > My /etc/exports file has just the one line: > > > > > > /home 192.168.100.200 > > > > > > > > > Output from netstat -rn: > > > > > > Routing tables > > > > > > Internet: > > > Destination Gateway Flags Netif Expire > > > default 24.113.160.1 UGSc dc0 > > > 24.113.160/22 link#1 UC dc0 => > > > 127.0.0.1 127.0.0.1 UH lo0 > > > 192.168.100 link#2 UC ed0 => > > > > > > Internet6: > > > Destination Gateway Flags Netif Expire > > > ::1 ::1 UH lo0 > > > fe80::%dc0/64 link#1 UC dc0 > > > fe80::%ed0/64 link#2 UC ed0 > > > fESG::%lo0/64 fe80::1%lo0 Uc lo0 > > > ff01::/32 ::1 U lo0 > > > ff02::%dc0/32 link#1 UC dc0 > > > ff02::%ed0/32 link#2 UC ed0 > > > ff02::%lo0/32 fe80::1%lo0 UC lo0 > > > > > > > > > Any ideas on what I'm doing wrong? > > > > > > Brad > > > > > > ----------------------------------------------------------------------- > > > Full output from dmesg: > > > > > > Copyright (c) 1992-2001 The FreeBSD Project. > > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > > The Regents of the University of California. All rights reserved. > > > FreeBSD 4.3-STABLE #0: Sun Jun 17 17:04:22 PDT 2001 > > > root@cr269907-a.poco1.bc.wave.home.com:/usr/obj/usr/src/sys/MYKERNEL > > > Timecounter "i8254" frequency 1193182 Hz > > > CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU) > > > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > > Features=0x383f9ff > > > real memory = 536854528 (524272K bytes) > > > config> di pcic0 > > > config> di sn0 > > > config> di lnc0 > > > config> di ie0 > > > config> di fe0 > > > config> di ed0 > > > config> di cs0 > > > config> en pcic1 > > > config> po pcic1 0x3e2 > > > config> ir pcic1 11 > > > config> iom pcic1 0xd4000 > > > config> f pcic1 0 > > > config> q > > > avail memory = 518311936 (506164K bytes) > > > Preloaded elf kernel "kernel" at 0xc0459000. > > > Preloaded userconfig_script "/boot/kernel.conf" at 0xc045909c. > > > Preloaded elf module "splash_bmp.ko" at 0xc04590ec. > > > Pentium Pro MTRR support enabled > > > md0: Malloc disk > > > module_register_init: MOD_LOAD (splash_bmp, c0454798, 0) error 2 > > > npx0: on motherboard > > > npx0: INT 16 interface > > > pcib0: on motherboard > > > pci0: on pcib0 > > > pcib2: at device 1.0 on pci0 > > > pci1: on pcib2 > > > pci1: at 0.0 irq 9 > > > isab0: at device 4.0 on pci0 > > > isa0: on isab0 > > > atapci0: port 0xd800-0xd80f at device 4.1 on pci0 > > > ata0: at 0x1f0 irq 14 on atapci0 > > > ata1: at 0x170 irq 15 on atapci0 > > > uhci0: port 0xd400-0xd41f irq 10 at device 4.2 on pci0 > > > usb0: on uhci0 > > > usb0: USB revision 1.0 > > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub0: 2 ports with 2 removable, self powered > > > uhci1: port 0xd000-0xd01f irq 10 at device 4.3 on pci0 > > > usb1: on uhci1 > > > usb1: USB revision 1.0 > > > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > > uhub1: 2 ports with 2 removable, self powered > > > dc0: port 0xb800-0xb8ff mem 0xf7800000-0xf78000ff irq 5 at device 9.0 on pci0 > > > dc0: Ethernet address: 00:80:c6:f9:c3:83 > > > miibus0: on dc0 > > > dcphy0: on miibus0 > > > dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > ed0: port 0xb400-0xb41f irq 11 at device 11.0 on pci0 > > > ed0: address 00:60:67:3b:de:ef, type NE2000 (16 bit) > > > pcib1: on motherboard > > > pci2: on pcib1 > > > fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > > > fdc0: FIFO enabled, 8 bytes threshold > > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > > atkbdc0: at port 0x60,0x64 on isa0 > > > atkbd0: flags 0x1 irq 1 on atkbdc0 > > > kbd0 at atkbd0 > > > psm0: irq 12 on atkbdc0 > > > psm0: model 4D Mouse, device ID 6 > > > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > > sc0: at flags 0x100 on isa0 > > > sc0: VGA <16 virtual consoles, flags=0x300> > > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > > sio0: type 16550A > > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > > sio1: type 16550A > > > ppc0: at port 0x378-0x37f irq 7 on isa0 > > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > > ppc0: FIFO with 16/16/8 bytes threshold > > > ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP > > > Probing for PnP devices on ppbus0: > > > ppbus0: PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL > > > plip0: on ppbus0 > > > lpt0: on ppbus0 > > > lpt0: Interrupt-driven port > > > ppi0: on ppbus0 > > > ad0: 14655MB [29777/16/63] at ata0-master UDMA66 > > > acd0: CDROM at ata1-slave using PIO4 > > > Mounting root from ufs:/dev/ad0s1a > > > swapon: adding /dev/ad0s1b as swap device > > > Automatic boot in progress... > > > /dev/ad0s1a: > > > FILESYSTEM CLEAN; SKIPPING CHECKS > > > /dev/ad0s1a: > > > clean, 10754 free > > > (346 frags, 1301 blocks, 0.7% fragmentation) > > > /dev/ad0s1g: > > > FILESYSTEM CLEAN; SKIPPING CHECKS > > > /dev/ad0s1g: > > > clean, 7484077 free > > > (581 frags, 935437 blocks, 0.0% fragmentation) > > > /dev/ad0s1f: > > > FILESYSTEM CLEAN; SKIPPING CHECKS > > > /dev/ad0s1f: > > > clean, 3721191 free > > > (51167 frags, 458753 blocks, 0.9% fragmentation) > > > /dev/ad0s1e: > > > FILESYSTEM CLEAN; SKIPPING CHECKS > > > /dev/ad0s1e: > > > clean, 3037 free > > > (61 frags, 372 blocks, 0.3% fragmentation) > > > Doing initial network setup: > > > hostname > > > . > > > dc0: flags=8843 mtu 1500 > > > inet 24.113.163.96 netmask 0xfffffc00 broadcast 24.113.163.255 > > > inet6 fe80::280:c6ff:fef9:c383%dc0 prefixlen 64 tentative scopeid 0x1 > > > ether 00:80:c6:f9:c3:83 > > > media: autoselect (none) status: active > > > supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX none > > > ed0: flags=8843 mtu 1500 > > > inet 192.168.100.100 netmask 0xffffff00 broadcast 192.168.100.255 > > > inet6 fe80::260:67ff:fe3b:deef%ed0 prefixlen 64 tentative scopeid 0x2 > > > ether 00:60:67:3b:de:ef > > > lo0: flags=8049 mtu 16384 > > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9 > > > inet6 ::1 prefixlen 128 > > > inet 127.0.0.1 netmask 0xff000000 > > > add net default: gateway 24.113.160.1 > > > Additional routing options: > > > TCP keepalive=YES > > > . > > > Routing daemons: > > > . > > > Additional daemons: > > > syslogd > > > . > > > Doing additional network setup: > > > portmap > > > . > > > Starting final network daemons: > > > mountd > > > Jun 18 20:51:36 cr269907-a mountd[165]: can't export /home > > > Jun 18 20:51:36 cr269907-a mountd[165]: bad exports list line /home 192.168.100.200 > > > nfsd > > > rpc.statd > > > . > > > ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib > > > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout > > > Starting standard daemons: > > > inetd > > > cron > > > sendmail > > > . > > > Jun 18 20:51:37 cr269907-a sendmail[197]: f5J30aE44624: SYSERR(root): Cannot open hash database /etc/mail/aliases.db: Inappropriate file type or format > > > Initial rc.i386 initialization: > > > . > > > Configuring syscons: > > > blank_time > > > screensaver > > > moused > > > . > > > Additional ABI support: > > > linux > > > . > > > Local package initialization: > > > apache > > > mysql > > > . > > > Additional TCP options: > > > . > > > > > > Mon Jun 18 20:51:43 PDT 2001 > > > kill: > > > 45246 > > > : > > > No such process > > > Jun 18 20:52:10 cr269907-a login: ROOT LOGIN (root) ON ttyv0 > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:34:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.sfu.ca (cs.sfu.ca [142.58.111.1]) by hub.freebsd.org (Postfix) with ESMTP id D35F337B401 for ; Mon, 18 Jun 2001 21:34:16 -0700 (PDT) (envelope-from mcneney@cs.sfu.ca) Received: from smahlt.math.sfu.ca (smahlt [199.60.17.25]) by cs.sfu.ca (8.9.1/8.9.1) with ESMTP id VAA17945; Mon, 18 Jun 2001 21:34:16 -0700 (PDT) Received: from localhost by smahlt.math.sfu.ca (8.8.8/1.1.20.8/23Nov99-0751PM) id VAA0000010476; Mon, 18 Jun 2001 21:34:15 -0700 (PDT) X-Authentication-Warning: smahlt.math.sfu.ca: mcneney owned process doing -bs Date: Mon, 18 Jun 2001 21:34:15 -0700 (PDT) From: Brad McNeney X-Sender: mcneney@smahlt.math.sfu.ca To: Joe Clarke Cc: questions@FreeBSD.ORG Subject: Re: trouble exporting fs In-Reply-To: <20010619002315.K14681-100000@shumai.marcuscom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It's just a plain UNIX text file -- no funny characters I can see in vi. Brad On Tue, 19 Jun 2001, Joe Clarke wrote: > You may want to look at /etc/exports in vi, then. See if it's been DOS > formatted, and has ^M's at the end of each line. If so, you should clean > it up to make it a UNIX text file. > > Joe Clarke > > On Mon, 18 Jun 2001, Brad McNeney wrote: > > > Yes, /home is a mounted partition: > > > > cr269907-a% df > > Filesystem 1K-blocks Used Avail Capacity Mounted on > > /dev/ad0s1a 49583 38838 6779 85% / > > /dev/ad0s1g 7496178 12110 6884374 0% /home > > /dev/ad0s1f 5954477 2233286 3244833 41% /usr > > /dev/ad0s1e 19815 16767 1463 92% /var > > procfs 4 4 0 100% /proc > > > > On Tue, 19 Jun 2001, Joe Clarke wrote: > > > > > Is /home a mounted partition? You should specify mounted partitions only > > > in /etc/exports. If your client needs to mount subdirectories on the > > > partition, consider the following: > > > > > > /usr /usr/home 192.168.100.200 > > > > > > Then, the client can mount /usr/home on /home. > > > > > > Joe Clarke > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:47:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from postal.ece.ubc.ca (postal.ece.ubc.ca [137.82.52.241]) by hub.freebsd.org (Postfix) with ESMTP id E0A0437B403 for ; Mon, 18 Jun 2001 21:47:26 -0700 (PDT) (envelope-from shailesh@ece.ubc.ca) Received: from shannon.ece.ubc.ca (shannon.ece.ubc.ca [137.82.57.192]) by postal.ece.ubc.ca (Postfix) with ESMTP id 0C9D4EC7D; Mon, 18 Jun 2001 21:46:37 -0700 (PDT) Received: from localhost by shannon.ece.ubc.ca (8.8.5/SMI-4.0) id VAA12729; Mon, 18 Jun 2001 21:40:42 -0700 (PDT) Date: Mon, 18 Jun 2001 21:40:42 -0700 (PDT) From: shailesh sheoran To: Matthew Emmerton Cc: Don Tyson , James Housley , FreeBSD-Questions , Subject: Re: d-link 530TX + cards still dysfunctional In-Reply-To: <004c01c0f869$b56a48f0$1200a8c0@gsicomp.on.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG HI guys, thanks so much for all the information. i am using the D Revision of the card, with the picture of a family on the front. has anyone had any success with revision D? is it supported in 4.3 - CURRENT? or if there are any drivers available for download... anything.. i don't want to have to replace my $50 worth of cards for this problem. by the way, i had BIOS configured for non PNP OS. thanks again, Shailesh Sheoran M.ASc. Department of Electrical Engineering University of British Columbia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 21:58:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id 4C3C437B403 for ; Mon, 18 Jun 2001 21:58:33 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id 06B6D6ACBC; Tue, 19 Jun 2001 14:28:31 +0930 (CST) Date: Tue, 19 Jun 2001 14:28:30 +0930 From: Greg Lehey To: Bill Moran Cc: victha@seychelles.net, freebsd-questions@FreeBSD.ORG Subject: Re: I need help to configure Vinum on Message-ID: <20010619142830.O58585@wantadilla.lemis.com> References: <3B14ED68.167A69D1@seychelles.net> <3B14FAC0.96EB3AC5@iowna.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3B14FAC0.96EB3AC5@iowna.com>; from wmoran@iowna.com on Wed, May 30, 2001 at 09:50:56AM -0400 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wednesday, 30 May 2001 at 9:50:56 -0400, Bill Moran wrote: > Jude Adeline wrote: >> i am setting up this new server and i want to run disk mirroring on it >> in case of a disk failure on the first disk. I have read some of the >> vinum configuration on the internet but its all a bit too obscure for >> me. This is the set up i need. > > If you've read everything at www.vinumvm.org and it still seems obscure, > I would suggest that you DON'T use vinum on a production system until it > starts to seem clear. If you don't understand what you are doing, you'll > have nothing but trouble, and if a drive crashes you won't understand > how to fix it anyway. > Hopefully you have an old (non production) computer somewhere that you > can experiment with. Create some vinum volumes there first until you're > familiar with the procedure. > >> disk 1 (da1) >> >> / 100Mb /dev/da1a >> /home 2000Mb /dev/da1f >> /usr 1000Mb /dev/da1h >> /var 1000Mb /dev/da1e >> /usr/local 2000Mb /dev/da1g >> /tmp/ 512Mb /dev/da1d >> swap 524Mb /dev/da1k >> >> i want to mirror the above on disk 2 (da2) > > If da1 and da2 are identical drives, the easiest procedure is probably: > 1. backup all data (this is the most important step - you WILL be > destroying all your data) > 2. Use disklabel to change partitions to type "vinum" > 3. use disklabel to duplicate the partition table on da1 onto da2 > 4. create a config file, and use it to define the vinum devices- > example: > > drive d1f device /dev/da1f > drive d2f device /dev/da2f > ... (define other devices) No. If you only have two disks, you have all the devices you need. > volume homemirror > plex org concat > sd drive d1f size 0 > plex org concat > sd drive d2f size 0 If you want more than one subdisk per spindle, you need to specify the sizes here (the sizes you mention above), not 0. > ... (define other volumes) > > 5. Run vinum(8) and use the create command to create volumes from your > config file > 6. Restore your data There are ways around having to do a backup. I've published them in rudimentary form several times; one of these days I'll get around to a proper description. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 22:33:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12007.mail.yahoo.com (web12007.mail.yahoo.com [216.136.172.215]) by hub.freebsd.org (Postfix) with SMTP id BABFB37B401 for ; Mon, 18 Jun 2001 22:33:29 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619053329.16735.qmail@web12007.mail.yahoo.com> Received: from [203.20.237.207] by web12007.mail.yahoo.com; Tue, 19 Jun 2001 15:33:29 EST Date: Tue, 19 Jun 2001 15:33:29 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: how do I use mergemaster? To: fbsd MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I have successfully CVS upped with your help and seek to make installworld etc. I am using a cheat sheet and it tells me to now use.. /usr/sbin/mergemaster -v I am doing so but what do I do with it? It is asking me to install delete merge temporary files. What options do I choose? i= seems to give " problem, leaving to deal with" m= gives me some editor I have no idea how to use ...hmmm I press default to leave to deal and it does it for every file (lots) Id be here forever! ANY HELP IS APPRECIATED. I am tearing my hair out here Regards Keith _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 22:47:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailf.telia.com (mailf.telia.com [194.22.194.25]) by hub.freebsd.org (Postfix) with ESMTP id 5359F37B406 for ; Mon, 18 Jun 2001 22:47:38 -0700 (PDT) (envelope-from ertr1013@student.uu.se) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by mailf.telia.com (8.11.2/8.11.0) with ESMTP id f5J5laJ25139 for ; Tue, 19 Jun 2001 07:47:37 +0200 (CEST) Received: from ertr1013.student.uu.se (h185n2fls20o913.telia.com [212.181.163.185]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id HAA13942 for ; Tue, 19 Jun 2001 07:47:36 +0200 (CEST) Received: (qmail 51040 invoked by uid 1001); 19 Jun 2001 05:47:08 -0000 Date: Tue, 19 Jun 2001 07:47:08 +0200 From: Erik Trulsson To: Keith Spencer Cc: fbsd Subject: Re: how do I use mergemaster? Message-ID: <20010619074707.A50989@student.uu.se> Mail-Followup-To: Keith Spencer , fbsd References: <20010619053329.16735.qmail@web12007.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20010619053329.16735.qmail@web12007.mail.yahoo.com> User-Agent: Mutt/1.3.19i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 03:33:29PM +1000, Keith Spencer wrote: > Hi folks, > I have successfully CVS upped with your help and seek > to make installworld etc. > I am using a cheat sheet and it tells me to now use.. > /usr/sbin/mergemaster -v > > I am doing so but what do I do with it? It is asking > me to install delete merge temporary files. > What options do I choose? If it is a file that you have not made any local modicfications on you should choose 'install'. If it is a file that you have changed choose 'merge'. > i= seems to give " problem, leaving to deal with" There is a bug in mergemaster in 4.3-STABLE that causes it to give this error message. Ignore it. > m= gives me some editor I have no idea how to use Try pressing 'h' to get help. > ...hmmm > I press default to leave to deal and it does it for > every file (lots) Id be here forever! > ANY HELP IS APPRECIATED. > I am tearing my hair out here > Regards > Keith > -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 22:51:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11001.mail.yahoo.com (web11001.mail.yahoo.com [216.136.131.51]) by hub.freebsd.org (Postfix) with SMTP id D920337B401 for ; Mon, 18 Jun 2001 22:51:49 -0700 (PDT) (envelope-from andyelf@yahoo.com) Message-ID: <20010619055149.67584.qmail@web11001.mail.yahoo.com> Received: from [192.193.210.32] by web11001.mail.yahoo.com; Mon, 18 Jun 2001 22:51:49 PDT Date: Mon, 18 Jun 2001 22:51:49 -0700 (PDT) From: Andrei Popov Subject: MGA PowerDesk To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anybody tried to compile this? The source (available here: ) is for Linux and is looking for sys/io.h: andrei@vogon:~/src/mgapdesk 8:35:06am% gmake gmake all-recursive gmake[1]: Entering directory `/home/andrei/src/mgapdesk' Making all in src gmake[2]: Entering directory `/home/andrei/src/mgapdesk/src' gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/X11R6/include/gtk12 -I/usr/local/include/glib12 -I/usr/local /include -I/usr/X11R6/include -g -O2 -Wall -c callbacks.c In file included from callbacks.c:43: io.h:17: sys/io.h: No such file or directory gmake[2]: *** [callbacks.o] Error 1 gmake[2]: Leaving directory `/home/andrei/src/mgapdesk/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/home/andrei/src/mgapdesk' gmake: *** [all-recursive-am] Error 2 andrei@vogon:~/src/mgapdesk Specificlly, it looks for outl, inl and iopl functions defined in glibc. Are there *BSD equivalents for these and where are they defined? __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 23:20:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 09AC837B401 for ; Mon, 18 Jun 2001 23:20:27 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5J6KNl67478; Mon, 18 Jun 2001 23:20:23 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Heimes, Rene" , Subject: RE: a sendmail question Date: Mon, 18 Jun 2001 23:20:23 -0700 Message-ID: <000101c0f887$ec2699c0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG http://poprelay.sourceforge.net/ also you may want to see http://w3.man.torun.pl/~makler/prog/poprelayd/ but that's more complicated and probably not needed for what you want to do. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Heimes, Rene >Sent: Monday, June 18, 2001 1:17 AM >To: freebsd-questions@FreeBSD.ORG >Subject: a sendmail question > > >hello! > >i have to care for a mail-server i did not initially set up. it >functions as a relay-server and also as "main" mail server for >customers. currently, only local users and our domain hosts are allowed >to send to non-domain email-addresses... > >how can i setup a sendmail system, that allows certain users to send >email to anywhere, just because they authenticated with username & >password? > >thank you in advance! > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 23:42:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fepC.post.tele.dk (fepC.post.tele.dk [195.41.46.147]) by hub.freebsd.org (Postfix) with ESMTP id E799C37B401 for ; Mon, 18 Jun 2001 23:42:35 -0700 (PDT) (envelope-from mekanix@privat.dk) Received: from mekanix.my.domain ([62.243.18.252]) by fepC.post.tele.dk (InterMail vM.4.01.03.21 201-229-121-121-20010307) with SMTP id <20010619064228.BWYW3936.fepC.post.tele.dk@mekanix.my.domain>; Tue, 19 Jun 2001 08:42:28 +0200 Date: Tue, 19 Jun 2001 08:43:14 +0200 From: Bjarne Wichmann Petersen To: Carsten Reimer Cc: freebsd-questions@FreeBSD.ORG Subject: How to run kdm Message-Id: <20010619084314.3b5908c0.mekanix@privat.dk> In-Reply-To: References: X-Mailer: Sylpheed version 0.4.64 (GTK+ 1.2.10; i386--freebsd4.3) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001 14:56:45 +0200 (MES) Carsten Reimer wrote: > It is started on booting time from a > startup-script in /usr/local/etc/rc.d . I'd like to know a little more on how you start kdm. I've tried just running kdm of /etc/rc.conf which starts kdm fine, but it locks out all keyinput but not mouse. Running kdm of a root-prompt works fine, so kdm is configured correct. Bjarne To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Jun 18 23:55:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 6282C37B403 for ; Mon, 18 Jun 2001 23:55:27 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5J6tGl67554; Mon, 18 Jun 2001 23:55:16 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Erik Trulsson" Cc: Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade Date: Mon, 18 Jun 2001 23:55:15 -0700 Message-ID: <001001c0f88c$cb1c18e0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <01061816423505.17965@trap.geckobot.com> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just a question, Were you running ULTRA DMA under 4.0 or were you running PIO mode? Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Rick >Sent: Monday, June 18, 2001 4:43 PM >To: Erik Trulsson >Cc: freebsd-questions@FreeBSD.ORG >Subject: Re: Significant Performance Drop during 4.0-4.3 Upgrade > > >Hi Erik- > >Thanks for responding so quickly! Unless I did something wrong, >that didn't >seem to do the trick. I sure thought it was going to work, though. > >I added the following line to /boot/defaults/loader.conf: > >hw.ata.wc="1" > >...and rebooted but the performance hasn't picked up to where it was with >FreeBSD 4.0. It may have gone up some-- I haven't been tracking >the numbers >very closely. > >By coincidence, one of the three systems was upgraded to FreeBSD >4.3 STABLE >instead of RELEASE, and it too shows roughly the same performance metrics. > >If I didn't do this right, please let me know. Otherwise if you or anyone >has other thoughts, I'd be happy to give them a try. > >Rick > >BTW- I'm not sure it's worth mentioning, but I still don't see any >of this in >the 4.3 RELEASE notes... > > > >On Monday 18 June 2001 14:07, Erik Trulsson wrote: >> On Mon, Jun 18, 2001 at 01:44:23PM -0700, Rick wrote: >> > Hi! >> > >> > I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using >sysinstall, and I >> > noticed that some rm -r operations seemed a little slow after the >> > upgrade. >> > >> > Coincidentally I've been working on an ISAM alternative to B-tree so I >> > have a bunch of performance benchmarks handy. The results: >> > >> > Disk hits are *much* slower after the upgrade. Many times slower, in >> > fact. I also had Berkley DB benchmarks that I was using for comparison >> > and they too were heavily impacted. >> > >> > For the life of me, I can't figure out what the heck happened! >> > SOFTUPDATES were off before the upgrade and I didn't change of the disk >> > tuning. I did tweak my kernel a bit, but nothing should have had this >> > effect-- I just removed a few things that weren't being used like EISA >> > and some network cards. When I examine dmesg everything still seems to >> > be recognized as ULTRA DMA, etc. I've tried putting everything back in >> > my kernel and I've try the GENERIC kernel with no improvements. >> > >> > I've looked through the release notes, etc., and couldn't find >anythingd >> > etailing this problem. Did I miss something? Am I just extra lucky? >> >> Yes, you missed one small thing. Write caching for IDE disks were >> turned off by default in 4.3-RELEASE. It has since been turned back on >> in 4.3-STABLE on since the performance hit was too big. >> (The reason it was turned off is that if you have the write-cache >> turned on can result in serious data-loss if you have a power failure.) >> >> You can turn it back on by setting hw.ata.wc=1 from the loader. >> See the manpages for ata(4) and loader(8) for more information. > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:15:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from spice.eahd.or.ug (spice.eahd.or.ug [216.250.215.140]) by hub.freebsd.org (Postfix) with ESMTP id 6074337B403 for ; Tue, 19 Jun 2001 00:15:34 -0700 (PDT) (envelope-from patrick@eahd.or.ug) Received: by spice.eahd.or.ug (Postfix at spice.eahd.or.ug, from userid 542) id D4010755D9; Tue, 19 Jun 2001 10:28:58 +0300 (EAT) Received: from localhost (localhost [127.0.0.1]) by spice.eahd.or.ug (Postfix at spice.eahd.or.ug) with ESMTP id D2C707559F; Tue, 19 Jun 2001 10:28:58 +0300 (EAT) Date: Tue, 19 Jun 2001 10:28:58 +0300 (EAT) From: Patrick To: Lee Mark Mercado Cc: Subject: Re: httpd error In-Reply-To: <000c01c0f865$ee873e80$2f15f4d8@leez12wqdmx2o3> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Lee Mark Mercado wrote: > > what does this error means ? i have all my /home/* directory permissions to >711 > Directories must be both read and executable to be transversed.... Change the directory to be readable and executable by the user httpd runs under. HTH Patrick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:18:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailin7.bigpond.com (juicer38.bigpond.com [139.134.6.95]) by hub.freebsd.org (Postfix) with ESMTP id 7AF1A37B401 for ; Tue, 19 Jun 2001 00:18:03 -0700 (PDT) (envelope-from whisky@macroshell.net) Received: from whisky ([144.135.24.75]) by mailin7.bigpond.com (Netscape Messaging Server 4.15) with SMTP id GF61VE00.6EQ for ; Tue, 19 Jun 2001 17:23:38 +1000 Received: from CPE-203-45-153-231.qld.bigpond.net.au ([203.45.153.231]) by bwmam03.mailsvc.email.bigpond.com(MailRouter V2.9d 8323/2422748); 19 Jun 2001 17:18:42 Message-ID: <002301c0f88f$e1fadda0$0100000a@whisky> From: "whisky" To: Subject: Quotas Problem Date: Tue, 19 Jun 2001 17:17:21 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0020_01C0F8E3.B349D980" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0020_01C0F8E3.B349D980 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am sorry to bother you from your daunting dask of coding one of the = best OS's out there but I have a issue with quotas which I thought you = might be able to shed some light on. I setup group quotas via=20 # edquota -g groupinquestion and instead of setting the quota for every user in the group... ie 20mb = each user... it set 20mb for the whole group... I run a webhosting co = and to setup a quota for every user would take time as we have to handle = approx. 50 logins per day this gets annoying. So if there is a way to = set for every user in a easy -g method that would be great... Or even a = script to set the quota per user.. I have setup a personalised adduser = script for the box which works great. But can't work out how I would do = per user...=20 ie # edquota -u username and then the script edit the blocks/inodes (I suck at coding) Thanks in advanced, Ramon Gonzalez whisky@MacroShell.net MacroShell Sysadmin -whisky ------=_NextPart_000_0020_01C0F8E3.B349D980 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I am sorry to bother you from your = daunting dask of=20 coding one of the best OS's out there but I have a issue with quotas = which I=20 thought you might be able to shed some light on.
 
I setup group quotas via
 
# edquota -g=20 groupinquestion
 
and instead of setting the quota for = every user in=20 the group... ie 20mb each user... it set 20mb for the whole group... I = run a=20 webhosting co and to setup a quota for every user would take time as we = have to=20 handle approx. 50 logins per day this gets annoying. So if there is a = way to set=20 for every user in a easy -g method that would be great... Or even a = script to=20 set the quota per user.. I have setup a personalised adduser script for = the box=20 which works great. But can't work out how I would do per user... =
 
ie
 
# edquota -u = username
 
and then the script edit the = blocks/inodes (I suck=20 at coding)
 
Thanks in advanced,
 
Ramon Gonzalez
whisky@MacroShell.net
MacroShell Sysadmin
-whisky
------=_NextPart_000_0020_01C0F8E3.B349D980-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:24:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f52.law11.hotmail.com [64.4.17.52]) by hub.freebsd.org (Postfix) with ESMTP id E517537B401 for ; Tue, 19 Jun 2001 00:24:24 -0700 (PDT) (envelope-from anandfranklin@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 00:24:24 -0700 Received: from 203.200.20.3 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 07:24:24 GMT X-Originating-IP: [203.200.20.3] From: "Anand Franklin J" To: freebsd-questions@FreeBSD.ORG Subject: serial communication tip problem!!! Date: Tue, 19 Jun 2001 07:24:24 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 19 Jun 2001 07:24:24.0727 (UTC) FILETIME=[DDD7F270:01C0F890] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi!! I have a problem in the serial communication using the tip command. I have given proper entry in /etc/ttys, /etc/gettytab and /etc/remote. still, when i give the command "tip cuaa0c" it just says "connected" and hangs. the login prompt doesnot occurs. I varified the log file, it says completed and terminated. Is there any more setting to be done, if so please do mail me. with regard's franklin. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:27:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc1-bigg2-0-cust221.lut.cable.ntl.com [62.255.179.221]) by hub.freebsd.org (Postfix) with ESMTP id AD72F37B401 for ; Tue, 19 Jun 2001 00:27:17 -0700 (PDT) (envelope-from neil@darlow.co.uk) Received: from ideal.darlow.co.uk (neil@ideal.darlow.co.uk [192.168.0.3]) by router.darlow.co.uk (8.11.1/8.11.1) with SMTP id f5J7REM81645 for ; Tue, 19 Jun 2001 08:27:16 +0100 (BST) (envelope-from neil@darlow.co.uk) From: Neil Darlow Date: Tue, 19 Jun 2001 07:27:14 GMT Message-ID: <20010619.7271400@ideal.darlow.co.uk> Subject: Advice for an upgrader To: freebsd-questions@freebsd.org X-Mailer: Mozilla/3.0 (compatible; StarOffice/5.2;Linux) X-Priority: 3 (Normal) MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I am currently running FreeBSD 4.2-RELEASE with security patches and am looking to upgrade to FreeBSD 4.3. Can I do an upgrade by CVS'ing the source tree and then performing a build world followed by reconciliation of /etc? The system I wish to upgrade is my cable firewall/router and has vinum'd drives so a complete re-install isn't what I'm looking for. Will a source-based upgrade of system and kernel take care of changes to the bootloader system (although the machine is configured as dangerously dedicated). Any advice and warnings of potential dangers will be gratefully received= . Regards, Neil Darlow. -- 1024D/531F9048 1999-09-11 Neil Darlow Key fingerprint =3D 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:34:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gondwana.ecr.mu.oz.au (gondwana.ecr.mu.oz.au [128.250.70.62]) by hub.freebsd.org (Postfix) with ESMTP id 0068937B403 for ; Tue, 19 Jun 2001 00:34:51 -0700 (PDT) (envelope-from glovell@ecr.mu.oz.au) Received: from gromit.ecr.mu.oz.au (gromit.ecr.mu.oz.au [128.250.61.61]) by gondwana.ecr.mu.oz.au (8.11.4/8.9.3) with ESMTP id f5J7YkA07569 for ; Tue, 19 Jun 2001 17:34:46 +1000 (EST) Received: from localhost (glovell@localhost) by gromit.ecr.mu.oz.au (8.11.3/8.8.5) with SMTP id f5J7YmJ1053640 for ; Tue, 19 Jun 2001 17:34:48 +1000 (EST) X-Authentication-Warning: gromit.ecr.mu.oz.au: glovell owned process doing -bs Date: Tue, 19 Jun 2001 17:34:48 +1000 (EST) From: Gregory W Lovell To: freebsd-questions@freebsd.org Subject: Failed "make" on quite normal kernel Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG FreeBSD Questions, I've tried to recompile the kernel to add NATD support to my system 3 times now, and it has failed every time. The only change I have made to the config file when compared to GENERIC are adding the lines: options IPFIREWALL options IPDIVERT These are added at the end of all the other "options" lines. The last few lines shown after the make command crashes are: si -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -e lf -mpreferred-stack-boundary=2 ../../dev/nsp/nsp.c cc: Internal compiler error: program cc1 got fatal signal 11 *** Error code 1 Stop in /usr/src/sys/compile/NATD bash-2.05#cpp:output pipe has been closed Jun 19 07:06:52 /kernel:pid 6420(cc1), uid 0: exited on signal 11 (core dumped) As you can imagine, this is quite frustrating, as NATD is to be one of the primary functions of the box. It is a Pentium 133 on a SuperMicro board without FDD, Serial or Parallel Controllers. Everything else seems to work fine except this. One thing that may be worth noting is that I actually have installed FreeBSD by plugging the HDD into another computer, as I cannot boot from CD-ROM or FDD. I was told this would be OK, but you never know... Any help would be greatly appreciated. The rest of my experience with FreeBSD has been very positive. Greg Lovell To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:40: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f125.law11.hotmail.com [64.4.17.125]) by hub.freebsd.org (Postfix) with ESMTP id 6537737B401 for ; Tue, 19 Jun 2001 00:39:59 -0700 (PDT) (envelope-from ronnetron@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 00:39:59 -0700 Received: from 24.130.49.190 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 07:39:58 GMT X-Originating-IP: [24.130.49.190] From: "Ron Smith" To: questions@freebsd.org Subject: FreeBSD, X and AGP Date: Tue, 19 Jun 2001 00:39:58 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 19 Jun 2001 07:39:59.0131 (UTC) FILETIME=[0ACAAEB0:01C0F893] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Sorry to consult the list on this one, but I couldn't seem to find an answer in the FreeBSD FAQs or 'The Complete FreeBSD' book. Does FreeBSD support AGP video, or must you use PCI style video cards? Ron _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:41:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from core.usrlib.org (CC2-861.charter-stl.com [24.217.115.99]) by hub.freebsd.org (Postfix) with ESMTP id 475AB37B401 for ; Tue, 19 Jun 2001 00:41:26 -0700 (PDT) (envelope-from ajh3@core.usrlib.org) Received: by core.usrlib.org (Postfix, from userid 1001) id 01D87A813; Tue, 19 Jun 2001 02:40:02 -0500 (CDT) Date: Tue, 19 Jun 2001 02:40:01 -0500 From: Andrew Hesford To: Ron Smith Cc: questions@freebsd.org Subject: Re: FreeBSD, X and AGP Message-ID: <20010619024001.A14248@core.usrlib.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from ronnetron@hotmail.com on Tue, Jun 19, 2001 at 12:39:58AM -0700 X-Loop: Andrew Hesford Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 12:39:58AM -0700, Ron Smith wrote: > Hi all, > > Sorry to consult the list on this one, but I couldn't seem to find an answer > in the FreeBSD FAQs or 'The Complete FreeBSD' book. > > Does FreeBSD support AGP video, or must you use PCI style video cards? > > Ron AGP is supported. Just add "device agp" to your kernel configuration file, rebuild and reboot. The three-step solution to all your AGP woes. Or some of them, anyway. -- Andrew Hesford ajh3@usrlib.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:45:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f84.law11.hotmail.com [64.4.17.84]) by hub.freebsd.org (Postfix) with ESMTP id 1978937B401 for ; Tue, 19 Jun 2001 00:45:12 -0700 (PDT) (envelope-from ronnetron@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 00:45:11 -0700 Received: from 24.130.49.190 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 07:45:11 GMT X-Originating-IP: [24.130.49.190] From: "Ron Smith" To: ajh3@usrlib.org Cc: questions@freebsd.org Subject: Re: FreeBSD, X and AGP Date: Tue, 19 Jun 2001 00:45:11 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 19 Jun 2001 07:45:11.0907 (UTC) FILETIME=[C5388330:01C0F893] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Great Andrew :-), ...can do!! For later reference though, where could I fild the docs on this? Ron >From: Andrew Hesford >To: Ron Smith >CC: questions@freebsd.org >Subject: Re: FreeBSD, X and AGP >Date: Tue, 19 Jun 2001 02:40:01 -0500 > >On Tue, Jun 19, 2001 at 12:39:58AM -0700, Ron Smith wrote: > > Hi all, > > > > Sorry to consult the list on this one, but I couldn't seem to find an >answer > > in the FreeBSD FAQs or 'The Complete FreeBSD' book. > > > > Does FreeBSD support AGP video, or must you use PCI style video cards? > > > > Ron > >AGP is supported. Just add "device agp" to your kernel configuration >file, rebuild and reboot. The three-step solution to all your AGP woes. >Or some of them, anyway. > >-- >Andrew Hesford >ajh3@usrlib.org _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:46: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fe4.in.gr (fe4.in.gr [194.63.247.168]) by hub.freebsd.org (Postfix) with ESMTP id 614E237B401 for ; Tue, 19 Jun 2001 00:46:03 -0700 (PDT) (envelope-from midiostri@in.gr) Received: from mail2.internal.ramnet.gr (mail2.mgmt.in.gr [194.63.247.202]) by fe4.in.gr (8.11.3/8.11.3) with ESMTP id f5J7hw603292 for ; Tue, 19 Jun 2001 10:43:59 +0300 (EEST) Received: from mail pickup service by mail2.internal.ramnet.gr with Microsoft SMTPSVC; Tue, 19 Jun 2001 10:37:48 +0300 Content-Class: urn:content-classes:message From: To: Subject: X application without starting a desktop Date: Tue, 19 Jun 2001 10:37:48 +0300 Message-ID: <1340d01c0f892$bcb70ac0$0205030a@internal.ramnet.gr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft CDO for Windows 2000 Thread-Index: AcD4kry38iFezGPoEdWcoACQJ6JV2g== X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Is it possible to run an XWindows application without starting KDE (or = Gnome etc..) ? (Something like launching the application together with the Xserver at = its minimum..) Thanks, Dimitri Tsuflidis Greece To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:52:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from citicorp.com (mango3-a.citicorp.com [192.193.196.253]) by hub.freebsd.org (Postfix) with ESMTP id 1E04237B407 for ; Tue, 19 Jun 2001 00:52:48 -0700 (PDT) (envelope-from andrei.popov@citicorp.com) Received: from myrtle1.citicorp.com (imta.citicorp.com [192.193.196.187]) by citicorp.com (8.9.3/8.9.3) with ESMTP id DAA17088; Tue, 19 Jun 2001 03:51:56 -0400 (EDT) From: andrei.popov@citicorp.com Received: from x400prod2.cgin.us-md.citicorp.com (root@omroute2lan1.email.citicorp.com [163.39.249.73]) by myrtle1.citicorp.com (Pro-8.9.3/8.9.3) with ESMTP id DAA01429; Tue, 19 Jun 2001 03:52:13 -0400 (EDT) Received: from phoboslan1.email.citicorp.com (phoboslan1.email.citicorp.com [169.166.1.69]) by x400prod2.cgin.us-md.citicorp.com (8.8.6 (PHNE_17135)/8.8.6) with ESMTP id DAA07194; Tue, 19 Jun 2001 03:52:09 -0400 (EDT) Received: from localhost (root@localhost) by phoboslan1.email.citicorp.com (8.8.6 (PHNE_17135)/8.8.6) with SMTP id IAA08595; Tue, 19 Jun 2001 08:52:08 +0100 (BST) X-OpenMail-Hops: 1 Date: Tue, 19 Jun 2001 08:51:59 +0100 Message-Id: Subject: RE: X application without starting a desktop MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG, midiostri@in.gr Content-Type: text/plain; charset=US-ASCII; name="BDY.TXT" Content-Disposition: inline; filename="BDY.TXT" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Is it possible to run an XWindows application without > starting KDE (or Gnome etc..) ? > (Something like launching the application together with the > Xserver at its minimum..) put it into your ~/.xinitrc or ~/.xsession file like so: #! /bin/sh # .xinitrc # start fvwm2 exec fvwm2 & # ...and start some nice progs exec xterm & exec xeyes & # EOF To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 0:59:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from isy.liu.se (isy.liu.se [130.236.48.10]) by hub.freebsd.org (Postfix) with ESMTP id 12CB537B401; Tue, 19 Jun 2001 00:59:40 -0700 (PDT) (envelope-from mj@isy.liu.se) Received: from lagrange.isy.liu.se (lagrange.isy.liu.se [130.236.49.127]) by isy.liu.se (8.11.4/8.11.4) with ESMTP id f5J7xcT29609; Tue, 19 Jun 2001 09:59:38 +0200 (MET DST) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Tue, 19 Jun 2001 09:59:57 +0200 (CEST) From: Micke Josefsson To: Micke Josefsson Subject: Re: Vinum trouble Cc: freebsd-questions@FreeBSD.ORG, Greg Lehey Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just for the record this is what I did to make it work again. Apparently the /bin/sh and /sbin/vinum did not like the older kernel. With the 4.2-fixit CD I installed /kernel, /modules/vinum.ko, /bin/sh and /sbin/vinum. The machine booted up allright! Then before making world again (with 4_2_0_RELEASE) I copied the entire /bin and /sbin contents from CD to my root partition. I rebuilt OK and is yet again up and running! Thanks for the tip about the version mismatch of vinum/kernel. /Micke On 13-Jun-01 Micke Josefsson wrote: > Thanks for your quick reply. I'll have another go at it today... > > On 12-Jun-01 Greg Lehey wrote: >> On Tuesday, 12 June 2001 at 16:50:05 +0200, Micke Josefsson wrote: >>> After failing at "make world" with sources for 4_2_0_RELEASE trying to >>> upgrade >>> my 3.x-STABLE machine vinum seems to have lost its config: >>> >>> >>> >>> When other disks have been found clean is says: >>> >>> vinum kernel module not available >> >> Well, that's not exactly a lost config, is it? >> >>> So I kldload vinum.ko : >>> link_elf: symbol gd_proc not defined (I got a cvsw_dev(?) also at one time) >> >> Looks like you have a mismatch between your kernel and your modules. >> Given the situation you describe, that's not surprising. > > I will try to extract a kernel and vinum.ko from my 4.2 CD and try again. > >> >>> And still get: >>> >>> cant open dev/vinum/mirror: device not configured >>> >>> and it later prompts me to run fsck manually. >>> >>> What's up? Is there any way to rectify things? >> >> Yes. If you're able to build the module, do so and install it. >> Otherwise the simplest thing is probably just to reboot with your 3.x >> kernel and repeat your build. >> > > Unfortunately the 'make world' bailed out some time into the 'installworld' > part. Apparently the system got a signal 12 when installing 'sh' and later > also > when installing 'test'. (At that point I was able to replace the 'sh' with one > I > had from my backups and 'make installworld' again. To no avail...) I ended up > with a system which not entirely 4.2 (but probably near to it) and not 3.x > either > but a mix of the two. So I am unable to start a new make world since I cannot > access /usr, which is where vinum enters the scene. > > > >>> (If I am going to pull back my backup I will probably skip vinum >>> this time) >> >> This has nothing to do with Vinum. This is a broken upgrade. >> > > Of course you are right about that, but having vinum appears (for now) to be > the > only thing that stops me from accessing /usr and being able to cvsup > 3.x-STABLE > and do another make world. Could I do that then I would try a shorter jump > into > 4.x, say 4.1. > > This is no criticism of vinum. It has served well for over a year now. When > evaluating it I disconnected one of the drives and after half a second of > locomotion the other drive started pumping out data as if nothing had > happened! > It really seems to work as such, I just gives me trouble when trying to > upgrade, > which is not necessarily an easy task even without vinum. > >>> BTW. A normal upgrade (with binaries) does not recognize vinum >>> drives, right? I only saw da1s1e and da2s1e not the mirrored drive >>> they actually constitute. >> >> I'm not sure what this question means. > > When doing an upgrade with my CD with 4.2 on it. I am passed to the disklabel > editor and prompted to insert mount points for my drives and partitions. There > I > see the two drives that are mirrored but only as da2s1e and da2s2e (not as > /dev/vinum/rmirror). What shall I do? Is it ok to set the mount point to /usr > for > both of them (or just one of them since they are mirrored)? Will > vinum see to the rest? > >> >> Greg >> -- >> When replying to this message, please copy the original recipients. >> If you don't, I may ignore the reply. >> For more information, see http://www.lemis.com/questions.html >> See complete headers for address and phone numbers >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message > > ---------------------------------- > Michael Josefsson, MSEE > mj@isy.liu.se > > This message was sent by XFMail > running on FreeBSD 4.3-STABLE > ---------------------------------- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---------------------------------- Michael Josefsson, MSEE mj@isy.liu.se This message was sent by XFMail running on FreeBSD 4.3-STABLE ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1: 0:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f204.law11.hotmail.com [64.4.17.204]) by hub.freebsd.org (Postfix) with ESMTP id 4F32937B406 for ; Tue, 19 Jun 2001 01:00:27 -0700 (PDT) (envelope-from ronnetron@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 01:00:27 -0700 Received: from 24.130.49.190 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 08:00:26 GMT X-Originating-IP: [24.130.49.190] From: "Ron Smith" To: ajh3@usrlib.org Cc: questions@freebsd.org Subject: Re: FreeBSD, X and AGP Date: Tue, 19 Jun 2001 01:00:26 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 19 Jun 2001 08:00:27.0135 (UTC) FILETIME=[E6BD38F0:01C0F895] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Great Andrew :-), Thanks. Just for future reference, though, where did you find the docs? Ron >From: Andrew Hesford >To: Ron Smith >CC: questions@freebsd.org >Subject: Re: FreeBSD, X and AGP >Date: Tue, 19 Jun 2001 02:40:01 -0500 > >On Tue, Jun 19, 2001 at 12:39:58AM -0700, Ron Smith wrote: > > Hi all, > > > > Sorry to consult the list on this one, but I couldn't seem to find an >answer > > in the FreeBSD FAQs or 'The Complete FreeBSD' book. > > > > Does FreeBSD support AGP video, or must you use PCI style video cards? > > > > Ron > >AGP is supported. Just add "device agp" to your kernel configuration >file, rebuild and reboot. The three-step solution to all your AGP woes. >Or some of them, anyway. > >-- >Andrew Hesford >ajh3@usrlib.org _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1: 0:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clientmail.realtime.co.uk (simian.realtime.co.uk [194.205.134.131]) by hub.freebsd.org (Postfix) with ESMTP id 4A24C37B407 for ; Tue, 19 Jun 2001 01:00:43 -0700 (PDT) (envelope-from waynep@pan.realtime.co.uk) Received: from [213.52.146.196] (helo=pan.realtime.co.uk) by clientmail.realtime.co.uk with esmtp (Exim 3.20 #1) id 15CGRG-0002u7-01 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 09:00:42 +0100 Received: from waynep by pan.realtime.co.uk with local (Exim 3.22 #1) id 15CGQq-0000H8-00 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 09:00:16 +0100 From: Wayne Pascoe To: freebsd-questions@freebsd.org Subject: [Wayne Pascoe ] Wireless setup Date: 19 Jun 2001 09:00:16 +0100 Message-ID: <86n1747vcf.fsf@pan.ehsrealtime.com> Lines: 35 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My apologies if this has already appeared. I posted it last night, and have still not seen it on the list... Hi there, I am looking at going wireless at home. My server / internet gateway lives downstairs, below the computer room upstairs. The walking distance is about 15 meters. The direct distance between the machines is about 8 meters, but with a floor between them. At the end of the day I need to have 3 laptops and 2 pc's on the network. The one pc is my internet gateway and home file server. The other PC is my main machine and my games machine. The laptops are my wife's and her parents. The PCI cards that I am looking at at are D-Link DWL-500's and the PCMCIA cards are D-Link DWL-650's. Are these cards supported under 4.3-STABLE ? The DWL-500 looks like a pcmcia card plugged into some kind of PCI bridge... Also, do they have the range for this kind of setup ? Lastly, what base station can people advise ? I need the cheapest one possible that will do the job and keep up with my needs for about 9 months. Any advice on these matters would be much appreciated. I don't really want to spend money on the wrong solution :) Thanks, -- - Wayne Pascoe E-mail: wayne.pascoe@realtime.co.uk Phone : +44 (0) 20 7544 4668 Mobile: +44 (0) 788 431 1675 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:13:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id 894F537B401 for ; Tue, 19 Jun 2001 01:13:47 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id 4F5BE6ACC0; Tue, 19 Jun 2001 17:43:45 +0930 (CST) Date: Tue, 19 Jun 2001 17:43:45 +0930 From: Greg Lehey To: Micke Josefsson Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Vinum trouble Message-ID: <20010619174345.E58585@wantadilla.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from mj@isy.liu.se on Tue, Jun 19, 2001 at 09:59:57AM +0200 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, 19 June 2001 at 9:59:57 +0200, Micke Josefsson wrote: > Just for the record this is what I did to make it work again. > > Apparently the /bin/sh and /sbin/vinum did not like the older > kernel. Yes, that's what I said. > With the 4.2-fixit CD I installed /kernel, /modules/vinum.ko, /bin/sh and > /sbin/vinum. The machine booted up allright! Then before making world again > (with 4_2_0_RELEASE) I copied the entire /bin and /sbin contents from CD to my > root partition. I rebuilt OK and is yet again up and running! > > Thanks for the tip about the version mismatch of vinum/kernel. In newer versions of Vinum, you'll get a better error message. Currently only in -CURRENT, but some time soon it will find its way into -STABLE. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:15:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from everest.wananchi.com (everest.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 5155737B401 for ; Tue, 19 Jun 2001 01:15:32 -0700 (PDT) (envelope-from wash@wananchi.com) Received: from wash by everest.wananchi.com with local (Exim 3.22 #2) id 15CGcx-000714-00 for freebsd-questions@FreeBSD.org; Tue, 19 Jun 2001 11:12:47 +0300 Date: Tue, 19 Jun 2001 11:12:47 +0300 From: Odhiambo Washington To: FBSD-Q Subject: make kernel KERNCONF=MYKERNEL Message-ID: <20010619111247.C22468@everest.wananchi.com> Mail-Followup-To: Odhiambo Washington , FBSD-Q Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="UHN/qo2QbUvPLonB" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Disclaimer: My opinions do not necessarily represent those of my employer. X-Operating-System: FreeBSD 4.3-STABLE i386 X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 11:07AM up 27 days, 12 mins, 3 users, load averages: 0.07, 0.15, 0.15 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --UHN/qo2QbUvPLonB Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello, After cvsupping last week and doing make world, I went ahead and did=20 cd /usr/src && make kernel KERNCONF=3DKern4.x=20 and all the time it would end up building GENERIC kernel. Then I decided for backward compatibility and did make buildkernel installkernel KERNCONF=3Dkern4.x and it build my kernel!! This is on 4.3-STABLE. Did I miss something along the way? -Wash -- Odhiambo Washington Wananchi Online Ltd., wash@wananchi.com 1st Flr Loita Hse. Tel: 254 2 313985 Loita Street., Fax: 254 2 313922 PO Box 10286,00100-NAIROBI,KE. Believe that life is worth living and your belief will help create the fact= .=20 -William James=20 --UHN/qo2QbUvPLonB Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE7Lwl/n7LIsuxjem8RAgNvAKCxGMUoGQXkldzKVUWQA07HkIk/dgCfXVlo GWjmSN68+gE76FnJDRQnNBs= =DriM -----END PGP SIGNATURE----- --UHN/qo2QbUvPLonB-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:26: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.optima.lt (mail.optima.lt [195.182.88.78]) by hub.freebsd.org (Postfix) with SMTP id 177B837B401 for ; Tue, 19 Jun 2001 01:25:53 -0700 (PDT) (envelope-from traq@opti.lt) Received: (qmail 47777 invoked from network); 19 Jun 2001 08:30:08 -0000 Received: from unknown (HELO radios) (195.182.88.76) by mail.optima.lt with SMTP; 19 Jun 2001 08:30:08 -0000 Message-ID: <001d01c0f891$33e4c170$4c58b6c3@radios> From: "Antanas Matevicius" To: Subject: Date: Tue, 19 Jun 2001 10:26:48 +0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001A_01C0F8AA.58D02A60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_001A_01C0F8AA.58D02A60 Content-Type: text/plain; charset="iso-8859-4" Content-Transfer-Encoding: quoted-printable ------=_NextPart_000_001A_01C0F8AA.58D02A60 Content-Type: text/html; charset="iso-8859-4" Content-Transfer-Encoding: quoted-printable
 
------=_NextPart_000_001A_01C0F8AA.58D02A60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:26:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.lix.aon.at (smtp1.lix.aon.at [195.3.86.158]) by hub.freebsd.org (Postfix) with ESMTP id EAE4E37B401 for ; Tue, 19 Jun 2001 01:26:36 -0700 (PDT) (envelope-from martin.schreiber@co-merce.at) Received: from avant ([212.183.26.194]) by smtp1.lix.aon.at (Build 98 8.9.3/NT-8.9.3) with SMTP id KAA06828 for ; Tue, 19 Jun 2001 10:26:18 +0200 Message-ID: <000901c0f899$b19d88b0$d5fea8c0@avant> From: "Martin Schreiber" To: Subject: build failed Date: Tue, 19 Jun 2001 10:27:34 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0005_01C0F8AA.746D68F0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.3018.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.3018.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C0F8AA.746D68F0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0006_01C0F8AA.746D68F0" ------=_NextPart_001_0006_01C0F8AA.746D68F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear FreeBSD Team, i have tried to build a new kernel because i want to use my freebsd = maschine as a gateway. I have 2 NICs installed ( 3com and SCM ) and the config is running fine, = also the make depend, but the make failed. Can you help me please ? thanks=20 martin the kernel file is attached ------=_NextPart_001_0006_01C0F8AA.746D68F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
Dear FreeBSD Team,
 
i have tried to build a new kernel = because i want=20 to use my freebsd maschine as a gateway.
I have 2 NICs installed ( 3com and SCM = ) and the=20 config is running fine, also the make depend,
but the make failed.
 
Can you help me please ?
 
thanks
martin
 
 
the kernel file is=20 attached
------=_NextPart_001_0006_01C0F8AA.746D68F0-- ------=_NextPart_000_0005_01C0F8AA.746D68F0 Content-Type: application/octet-stream; name="TOR" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="TOR" machine i386 cpu I586_CPU ident TOR maxusers 32 makeoptions DEBUG=3D-g #Build kernel with gdb(1) = debug symbols options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep = this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS = required options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 = required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP = THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options IPFIREWALL options IPDIVERT options IPFIREWALL_FORWARD device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device # PCI Ethernet NICs. device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs! device miibus # MII bus support # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) ------=_NextPart_000_0005_01C0F8AA.746D68F0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:31:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from discus.nl.uu.net (discus.nl.uu.net [193.67.79.178]) by hub.freebsd.org (Postfix) with ESMTP id EF44737B403 for ; Tue, 19 Jun 2001 01:31:50 -0700 (PDT) (envelope-from arjan@jak.nl) Received: from 1Cust191.tnt20.rtm1.nl.uu.net ([213.116.134.191]:1051 "EHLO jak.nl") by discus.nl.uu.net with ESMTP id ; Tue, 19 Jun 2001 10:31:44 +0200 Message-ID: <3B2F0E4A.5921ED12@jak.nl> Date: Tue, 19 Jun 2001 10:33:15 +0200 From: Arjan Knepper Organization: JAK++ Software Development B.V. X-Mailer: Mozilla 4.75 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: midiostri@in.gr Cc: freebsd-questions@freebsd.org Subject: Re: X application without starting a desktop References: <1340d01c0f892$bcb70ac0$0205030a@internal.ramnet.gr> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yes as long as you run a x-server. midiostri@in.gr wrote: > Hi, > > Is it possible to run an XWindows application without starting KDE (or Gnome etc..) ? > (Something like launching the application together with the Xserver at its minimum..) > > Thanks, > Dimitri Tsuflidis > Greece > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:35:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gdmckee.local (pc-62-30-209-11-so.blueyonder.co.uk [62.30.209.11]) by hub.freebsd.org (Postfix) with ESMTP id D591837B403 for ; Tue, 19 Jun 2001 01:35:53 -0700 (PDT) (envelope-from freebsd@gdmckee.com) Received: from [192.168.0.10] (helo=p300) by gdmckee.local with smtp (Exim 3.22 #1) id 15CGzG-0009F7-00; Tue, 19 Jun 2001 09:35:50 +0100 Message-ID: <001301c0f89a$d2b1e5e0$0a00a8c0@gdmckee.local> From: "G D McKee" To: "Mario Doria" , "FreeBSD Questions" References: <006201c0f6d8$f33e9e70$0a00a8c0@midgar> Subject: Re: UPS Monitor question Date: Tue, 19 Jun 2001 09:35:40 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have a Smart UPS 1000 and the last time the battery lights started flashing the batteries were on there way out!!! New batteries and some calibration sorted the problem for me. Gordon ----- Original Message ----- From: "Mario Doria" To: "FreeBSD Questions" Sent: Sunday, June 17, 2001 3:55 AM Subject: UPS Monitor question > Hi, > > I was using upsd from the ports collection to monitor my ups (APC SmartUPS > 2400), but sometimes the battery status in the UPS starts blinking, and the > sensitivity register gets changed to low. I'm looking for a better > alternative, any suggestions? > > > Thanks, > > > Mario Doria > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:37:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from brisefer.cediti.be (brisefer.cediti.be [193.190.156.67]) by hub.freebsd.org (Postfix) with ESMTP id 8741037B401 for ; Tue, 19 Jun 2001 01:37:20 -0700 (PDT) (envelope-from Olivier.Cherrier@cediti.be) Received: by brisefer.cediti.be with Internet Mail Service (5.5.2650.21) id ; Tue, 19 Jun 2001 10:33:58 +0200 Message-ID: From: Olivier Cherrier To: 'freebsd-questions' Subject: cvs trouble Date: Tue, 19 Jun 2001 10:33:57 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello. I recently installed a 4.3 minimal release. Now, I try to retrieve the source tree for src/sys. I get the following: << dugorgeon# cvs login ... dugorgeon# cvs checkout -r RELENG_4_3_0_RELEASE src/sys cvs checkout: in directory src: cvs checkout: cannot open CVS/Entries for reading: No such file or directory cvs [checkout aborted]: cannot write : No such file or direct ory dugorgeon# echo $CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs dugorgeon# cvs logout (Logging out of anoncvs@anoncvs.FreeBSD.org) dugorgeon# >> Furthermore, is there *only* one cvs server for all the world? The page http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/anoncvs.html says the following: << At the time of this writing, the following servers are available: * USA: :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs (Use cvs login and enter the password ``anoncvs'' when prompted.) >> "/home/ncvs" seems to be the root of the source; isn't it? So, why the checked out module in the example is "ls"? There is no "ls" directory in the root of the source tree! Thanks a lot for help. oc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:42:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id DC21437B403 for ; Tue, 19 Jun 2001 01:42:34 -0700 (PDT) (envelope-from simon@comsys.ntu-kpi.kiev.ua) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id CCC3D2EF0C for ; Tue, 19 Jun 2001 11:42:27 +0300 (EEST) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.3/8.11.3) with SMTP id f5J8ftQ40186 for ; Tue, 19 Jun 2001 11:41:55 +0300 (EEST) Message-ID: <002401c0f892$ed9a4d00$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: References: <200106181603.f5IG3gw05556@fac13.ds.psu.edu> Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? Date: Tue, 19 Jun 2001 11:39:10 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks to all I'll try to upgrade 4.2-STABLE to 4.3-STABLE. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:46: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11904.mail.yahoo.com (web11904.mail.yahoo.com [216.136.172.188]) by hub.freebsd.org (Postfix) with SMTP id C8C1237B403 for ; Tue, 19 Jun 2001 01:46:03 -0700 (PDT) (envelope-from h4rris_99@yahoo.com) Message-ID: <20010619084603.45955.qmail@web11904.mail.yahoo.com> Received: from [202.159.33.210] by web11904.mail.yahoo.com; Tue, 19 Jun 2001 01:46:03 PDT Date: Tue, 19 Jun 2001 01:46:03 -0700 (PDT) From: richard harris Subject: single user To: freebsd-questions@freebsd.org Cc: security@freedsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi... I prevent booting FreeBSD into the single user mode with this path in /etc/ttys:# # This entry needed for asking password when init goes to single-usermode # If you want to be asked for password, change "secure" to "insecure"here console none unknown off secure but right now i forgot my root password, so what can i do??? __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:51:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fep02-svc.mail.telepac.pt (fep02-svc.mail.telepac.pt [194.65.5.201]) by hub.freebsd.org (Postfix) with ESMTP id 89C4037B401 for ; Tue, 19 Jun 2001 01:51:48 -0700 (PDT) (envelope-from jpedras@webvolution.net) Received: from mobinho.tafkap.priv ([212.55.187.74]) by fep02-svc.mail.telepac.pt (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20010619085909.YAG16396.fep02-svc.mail.telepac.pt@mobinho.tafkap.priv> for ; Tue, 19 Jun 2001 09:59:09 +0100 Date: Tue, 19 Jun 2001 09:51:59 +0100 From: Joao Pedras To: freebsd-questions@freebsd.org Subject: burncd & acer cdr Message-ID: <54930000.992940719@mobinho.tafkap.priv> X-Mailer: Mulberry/2.0.6 (FreeBSD/x86) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anyone tried burncd with an Acer CDRw ? Any other method to record on atapi cdrs ? Thanks I get these : Jun 17 14:45:55 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:45:55 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:45:55 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:46:55 calhau /kernel: acd1: SYNCHRONIZE_CACHE command timeout - resetting Jun 17 14:46:55 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:47:00 calhau /kernel: done Jun 17 14:47:00 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:47:00 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:47:00 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:47:15 calhau /kernel: acd1: MODE_SENSE_BIG command timeout - resetting Jun 17 14:47:15 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:47:15 calhau /kernel: done Jun 17 14:47:15 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:47:15 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:47:15 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:47:30 calhau /kernel: acd1: MODE_SENSE_BIG command timeout - resetting Jun 17 14:47:30 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:47:30 calhau /kernel: done Jun 17 14:47:30 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:47:30 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:47:30 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:47:45 calhau /kernel: acd1: MODE_SENSE_BIG command timeout - resetting Jun 17 14:47:45 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:52:07 calhau /kernel: acd1: CLOSE_TRACK/SESSION command timeout - resetting Jun 17 14:52:07 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:52:07 calhau /kernel: done Jun 17 14:52:07 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:52:07 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:52:07 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:52:36 calhau /kernel: acd1: CLOSE_TRACK/SESSION command timeout - resetting Jun 17 14:52:42 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:52:42 calhau /kernel: done Jun 17 14:52:42 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:52:42 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:52:42 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:53:17 calhau /kernel: acd1: TEST_UNIT_READY command timeout - resetting Jun 17 14:53:17 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 Jun 17 14:53:17 calhau /kernel: done Jun 17 14:53:17 calhau /kernel: ata1-slave: timeout waiting to give command=a0 s=d0 e=50 Jun 17 14:53:17 calhau /kernel: acd1: failure to send ATAPI packet command Jun 17 14:53:17 calhau /kernel: acd1: failure to execute ATAPI packet command Jun 17 14:53:52 calhau /kernel: acd1: TEST_UNIT_READY command timeout - resetting Jun 17 14:53:52 calhau /kernel: ata1: resetting devices .. ata1-slave: timeout waiting for command=ef s=d0 e=50 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 1:55:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from void.xpert.com (xpert.com [199.203.132.1]) by hub.freebsd.org (Postfix) with ESMTP id 0CE7C37B406 for ; Tue, 19 Jun 2001 01:55:21 -0700 (PDT) (envelope-from daniel@xpert.com) Received: from mailserv.xpert.com ([199.203.132.135]) by void.xpert.com with esmtp (Exim 3.20 #1) id 15CGKH-0003a6-00 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 10:53:29 +0300 Received: by mailserv.xpert.com with Internet Mail Service (5.5.2650.21) id ; Tue, 19 Jun 2001 11:54:35 +0300 Message-ID: From: Daniel Levy To: "'freebsd-questions@freebsd.org'" Subject: Date: Tue, 19 Jun 2001 11:54:25 +0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="WINDOWS-1255" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG exim 3.22 daemon started: pid=8698, -q30m, not listening for SMTP Somebody knows about that error ? Thx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2: 0:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wiproecmx1.wipro.com (wiproecmx1.wipro.com [164.164.31.5]) by hub.freebsd.org (Postfix) with ESMTP id 6F99137B407 for ; Tue, 19 Jun 2001 02:00:44 -0700 (PDT) (envelope-from sumanth.vidyadhara@wipro.com) Received: from ecvwall11.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx1.wipro.com (8.11.3/8.11.3) with SMTP id f5JJK7j03759 for ; Tue, 19 Jun 2001 14:20:08 -0500 (GMT) Received: from ecvwall11.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GF66AE00.B6Y for ; Tue, 19 Jun 2001 14:29:02 +0530 Received: from sumanth ([192.168.205.201]) by platinum.mail.wipro.com (Netscape Messaging Server 4.15) with ESMTP id GF66BH00.UC2 for ; Tue, 19 Jun 2001 14:29:41 +0530 Message-ID: <03db01c0f89f$79e82780$c9cda8c0@sumanth> From: "sumanth vidyadhara" To: Subject: How to put a breakpoint in a kernel loadable module Date: Tue, 19 Jun 2001 14:38:59 +0530 Organization: Wipro Global R&D MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------InterScan_NT_MIME_Boundary Content-Type: multipart/alternative; boundary="----=_NextPart_000_03D8_01C0F8CD.937B9D70" ------=_NextPart_000_03D8_01C0F8CD.937B9D70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi All, How do we put a breakpoint for the kernel loadable module. So that we can trace the execution of the kernel module. Also can we disassemble the code ,what is the syntax for it. Any help is greatly appreaciated. Thanks Sumanth ------=_NextPart_000_03D8_01C0F8CD.937B9D70 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi All,
  How do we put a breakpoint for = the kernel=20 loadable module.
So that we can trace the execution of = the kernel=20 module.
Also can we disassemble the code ,what = is the=20 syntax for it.
Any help is greatly = appreaciated.
Thanks
Sumanth
 
------=_NextPart_000_03D8_01C0F8CD.937B9D70-- --------------InterScan_NT_MIME_Boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2: 1:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from speer.nl.uu.net (speer.nl.uu.net [193.67.79.174]) by hub.freebsd.org (Postfix) with ESMTP id BFFFB37B409 for ; Tue, 19 Jun 2001 02:01:41 -0700 (PDT) (envelope-from arjan@jak.nl) Received: from 1Cust52.tnt27.rtm1.nl.uu.net ([213.116.148.52]:1083 "EHLO jak.nl") by speer.nl.uu.net with ESMTP id ; Tue, 19 Jun 2001 11:01:32 +0200 Message-ID: <3B2F1543.A42FEEA1@jak.nl> Date: Tue, 19 Jun 2001 11:02:59 +0200 From: Arjan Knepper Organization: JAK++ Software Development B.V. X-Mailer: Mozilla 4.75 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: richard harris , "freebsd-questions@freebsd.org" Subject: Re: single user References: <20010619084603.45955.qmail@web11904.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Reboot in single user mode - reboot - boot -s - mount filesystems you should be able to edit anything you want AS ROOT see : http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#FORGOT-ROOT-PW richard harris wrote: > Hi... > I prevent booting FreeBSD into the single user mode > with this path > in /etc/ttys:# > # This entry needed for asking password when init goes > to single-usermode > # If you want to be asked for password, change > "secure" to "insecure"here > console none unknown off secure > > but right now i forgot my root password, so what can i > do??? > > __________________________________________________ > Do You Yahoo!? > Spot the hottest trends in music, movies, and more. > http://buzz.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2: 5:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from speer.nl.uu.net (speer.nl.uu.net [193.67.79.174]) by hub.freebsd.org (Postfix) with ESMTP id 7E22937B407 for ; Tue, 19 Jun 2001 02:05:52 -0700 (PDT) (envelope-from arjan@jak.nl) Received: from 1Cust166.tnt18.rtm1.nl.uu.net ([213.116.130.166]:1084 "EHLO jak.nl") by speer.nl.uu.net with ESMTP id ; Tue, 19 Jun 2001 11:05:41 +0200 Message-ID: <3B2F1640.EB66123@jak.nl> Date: Tue, 19 Jun 2001 11:07:12 +0200 From: Arjan Knepper Organization: JAK++ Software Development B.V. X-Mailer: Mozilla 4.75 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Olivier Cherrier Cc: 'freebsd-questions' Subject: Re: cvs trouble References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well you COULD do it the hard way like this, much faster is to use cvsup! Install cvsup cd /usr/share/examples/cvsup read the README and issue cvsup -L 2 -g ./ Good luck Arjan Olivier Cherrier wrote: > Hello. > > I recently installed a 4.3 minimal release. > Now, I try to retrieve the source tree for src/sys. > > I get the following: > > << > dugorgeon# cvs login > ... > dugorgeon# cvs checkout -r RELENG_4_3_0_RELEASE src/sys > cvs checkout: in directory src: > cvs checkout: cannot open CVS/Entries for reading: No such file or directory > cvs [checkout aborted]: cannot write : No such file or > direct > ory > dugorgeon# echo $CVSROOT > :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs > dugorgeon# cvs logout > (Logging out of anoncvs@anoncvs.FreeBSD.org) > dugorgeon# > >> > > Furthermore, is there *only* one cvs server for all the world? The page > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/anoncvs.html > says the following: > << > At the time of this writing, the following servers are available: > * USA: :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs (Use cvs login > and enter the password ``anoncvs'' when prompted.) > >> > > "/home/ncvs" seems to be the root of the source; isn't it? > So, why the checked out module in the example is "ls"? There is > no "ls" directory in the root of the source tree! > > Thanks a lot for help. > > oc > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:12:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from isy.liu.se (isy.liu.se [130.236.48.10]) by hub.freebsd.org (Postfix) with ESMTP id 6CE4937B403 for ; Tue, 19 Jun 2001 02:12:29 -0700 (PDT) (envelope-from mj@isy.liu.se) Received: from lagrange.isy.liu.se (lagrange.isy.liu.se [130.236.49.127]) by isy.liu.se (8.11.4/8.11.4) with ESMTP id f5J9CQT01190; Tue, 19 Jun 2001 11:12:26 +0200 (MET DST) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <001301c0f89a$d2b1e5e0$0a00a8c0@gdmckee.local> Date: Tue, 19 Jun 2001 11:12:45 +0200 (CEST) From: Micke Josefsson To: G D McKee Subject: Re: UPS Monitor question Cc: FreeBSD Questions Cc: FreeBSD Questions , Mario Doria Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I use upsmon from the ports. It comes with upsstat, a program that queries the UPS itself and finds out battery voltages etc. UPSMON Status Reporting Facility --- upsmond version 2.1.3 --- APC UPS 700 Status Info -------------------------------------------------------- Model: SMART-UPS 700 CopyRight: (C) APCC Manufacture date: 12/18/99 Serial #: NS9951331687 Firmware version: 50.11.I Local ID: UPS_IDEN Last battery replace date: 12/18/99 Nominal line voltage: 230 V Nominal battery voltage: 24 V Available: YES Standby: NO Line Power: OK Battery: OK Line Voltage: 231.40 Load: 23.40 % Battery Voltage: 27.60 Battery Level: 100.00 % -------------------------------------------------------- /M On 19-Jun-01 G D McKee wrote: > Hi > > I have a Smart UPS 1000 and the last time the battery lights started > flashing the batteries were on there way out!!! New batteries and some > calibration sorted the problem for me. > > Gordon > > ----- Original Message ----- > From: "Mario Doria" > To: "FreeBSD Questions" > Sent: Sunday, June 17, 2001 3:55 AM > Subject: UPS Monitor question > > >> Hi, >> >> I was using upsd from the ports collection to monitor my ups (APC SmartUPS >> 2400), but sometimes the battery status in the UPS starts blinking, and > the >> sensitivity register gets changed to low. I'm looking for a better >> alternative, any suggestions? >> >> >> Thanks, >> >> >> Mario Doria >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---------------------------------- Michael Josefsson, MSEE mj@isy.liu.se This message was sent by XFMail running on FreeBSD 4.3-STABLE ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:23:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wiproecmx1.wipro.com (wiproecmx1.wipro.com [164.164.31.5]) by hub.freebsd.org (Postfix) with ESMTP id 2272137B403 for ; Tue, 19 Jun 2001 02:23:37 -0700 (PDT) (envelope-from sumanth.vidyadhara@wipro.com) Received: from ecvwall11.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx1.wipro.com (8.11.3/8.11.3) with SMTP id f5JJh6j13117 for ; Tue, 19 Jun 2001 14:43:06 -0500 (GMT) Received: from ecvwall11.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GF67CP00.08Q for ; Tue, 19 Jun 2001 14:52:01 +0530 Received: from sumanth ([192.168.205.201]) by platinum.mail.wipro.com (Netscape Messaging Server 4.15) with ESMTP id GF67DS00.KBX for ; Tue, 19 Jun 2001 14:52:40 +0530 Message-ID: <042701c0f8a2$afdb5030$c9cda8c0@sumanth> From: "sumanth vidyadhara" To: Subject: ddb manual Date: Tue, 19 Jun 2001 15:01:58 +0530 Organization: Wipro Global R&D MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------InterScan_NT_MIME_Boundary Content-Type: multipart/alternative; boundary="----=_NextPart_000_0424_01C0F8D0.C96D3F80" ------=_NextPart_000_0424_01C0F8D0.C96D3F80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi All, 1> Is there any manual for ddb 2> The call function in the ddb fails, says that the kernel module = we want to load is not there. 3> How do we generate symbol files for the our kernel module so that = we can put breakpoints for the module. =20 Any help is greatly appreciated. Thanks, Sumanth ------=_NextPart_000_0424_01C0F8D0.C96D3F80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi All,
  1> Is there any manual for=20 ddb
    2> The call = function in the=20 ddb  fails, says that the kernel module we want to load is not=20 there.
    3> How do we = generate symbol=20 files for the our kernel module so that we can put breakpoints for the=20 module.
   
 
Any help is greatly = appreciated.
 
Thanks,
Sumanth
------=_NextPart_000_0424_01C0F8D0.C96D3F80-- --------------InterScan_NT_MIME_Boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:24:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bumper.jellybaby.net (bumper.jellybaby.net [194.159.247.1]) by hub.freebsd.org (Postfix) with ESMTP id D9C4E37B403 for ; Tue, 19 Jun 2001 02:24:16 -0700 (PDT) (envelope-from simond@bumper.jellybaby.net) Received: (from simond@localhost) by bumper.jellybaby.net (8.9.2/8.9.2) id KAA40520; Tue, 19 Jun 2001 10:24:32 +0100 (BST) (envelope-from simond) Date: Tue, 19 Jun 2001 10:24:31 +0100 From: simond@irrelevant.org To: Andrei Popov Cc: freebsd-questions@freebsd.org Subject: Re: MGA PowerDesk Message-ID: <20010619102431.C38995@irrelevant.org> References: <20010619055149.67584.qmail@web11001.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20010619055149.67584.qmail@web11001.mail.yahoo.com>; from andyelf@yahoo.com on Mon, Jun 18, 2001 at 10:51:49PM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Jun 18, 2001 at 10:51:49PM -0700, Andrei Popov wrote: > Has anybody tried to compile this? The source (available here: ) is > for Linux and is looking for sys/io.h: > > andrei@vogon:~/src/mgapdesk > 8:35:06am% gmake > gmake all-recursive > gmake[1]: Entering directory `/home/andrei/src/mgapdesk' > Making all in src > gmake[2]: Entering directory `/home/andrei/src/mgapdesk/src' > gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/X11R6/include/gtk12 > -I/usr/local/include/glib12 -I/usr/local > /include -I/usr/X11R6/include -g -O2 -Wall -c callbacks.c > In file included from callbacks.c:43: > io.h:17: sys/io.h: No such file or directory > gmake[2]: *** [callbacks.o] Error 1 > gmake[2]: Leaving directory `/home/andrei/src/mgapdesk/src' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory `/home/andrei/src/mgapdesk' > gmake: *** [all-recursive-am] Error 2 > andrei@vogon:~/src/mgapdesk > > Specificlly, it looks for outl, inl and iopl functions defined in > glibc. Are there *BSD equivalents for these and where are they defined? You could always try the x11/mgapdesk port -- Simon Dick simond@irrelevant.org "Why do I get this urge to go bowling everytime I see Tux?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:43:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fe4.in.gr (fe4.in.gr [194.63.247.168]) by hub.freebsd.org (Postfix) with ESMTP id F0E5E37B401 for ; Tue, 19 Jun 2001 02:43:30 -0700 (PDT) (envelope-from midiostri@in.gr) Received: from mail2.internal.ramnet.gr (mail2.mgmt.in.gr [194.63.247.202]) by fe4.in.gr (8.11.3/8.11.3) with ESMTP id f5J9et608469; Tue, 19 Jun 2001 12:40:56 +0300 (EEST) Received: from mail pickup service by mail2.internal.ramnet.gr with Microsoft SMTPSVC; Tue, 19 Jun 2001 12:34:46 +0300 Content-Class: urn:content-classes:message From: To: Cc: Subject: re: X application without starting a desktop Date: Tue, 19 Jun 2001 12:34:46 +0300 Message-ID: <135b701c0f8a3$13b683e0$0205030a@internal.ramnet.gr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft CDO for Windows 2000 Thread-Index: AcD4oxO08iFjpWPoEdWcoACQJ6JV2g== X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks andrei! :) i've installed fvwm2 (it wasn't istalled) and changed both my ~/.xinitrc = and ~/.xsession to this: #! /bin/sh (<-- btw. what's the meaning/use of this comment?) # .xinitrc # start fvwm2 exec fvwm2 & # ...and start some nice progs exec xterm & exec xeyes & # EOF When I startx, the Xserver starts loading and then shuts down. When I tried to run fvwm2 directly from the prompt: # fvwm2 & I got a "Can't open display" <> Am I doing something wrong? (btw. i'm using FBSD 4.3) Dimitri -----=C1=F1=F7=E9=EA=FC =EC=DE=ED=F5=EC=E1----- > Is it possible to run an XWindows application without=20 > starting KDE (or Gnome etc..) ? > (Something like launching the application together with the=20 > Xserver at its minimum..) put it into your ~/.xinitrc or ~/.xsession file like so: #! /bin/sh # .xinitrc # start fvwm2 exec fvwm2 & # ...and start some nice progs exec xterm & exec xeyes & # EOF To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:45:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fe4.in.gr (fe4.in.gr [194.63.247.168]) by hub.freebsd.org (Postfix) with ESMTP id D4CEE37B401 for ; Tue, 19 Jun 2001 02:45:50 -0700 (PDT) (envelope-from midiostri@in.gr) Received: from mail2.internal.ramnet.gr (mail2.mgmt.in.gr [194.63.247.202]) by fe4.in.gr (8.11.3/8.11.3) with ESMTP id f5J9hv608623; Tue, 19 Jun 2001 12:43:57 +0300 (EEST) Received: from mail pickup service by mail2.internal.ramnet.gr with Microsoft SMTPSVC; Tue, 19 Jun 2001 12:37:47 +0300 Content-Class: urn:content-classes:message From: To: "Arjan Knepper" Cc: Subject: re: X application without starting a desktop Date: Tue, 19 Jun 2001 12:37:47 +0300 Message-ID: <135cc01c0f8a3$7fde32c0$0205030a@internal.ramnet.gr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft CDO for Windows 2000 Thread-Index: AcD4o3/e8iFjxWPoEdWcoACQJ6JV2g== X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How can I do this? I mean, how can I start a plain Xserver with no desktop and all the extra stuff? thanks, Dimitri Arjan answered: Yes as long as you run a x-server. midiostri@in.gr wrote: > Hi, > > Is it possible to run an XWindows application without starting KDE (or = Gnome etc..) ? > (Something like launching the application together with the Xserver at = its minimum..) > > Thanks, > Dimitri Tsuflidis > Greece > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:54:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from exchange.twowaytv.co.uk (exchange.twowaytv.co.uk [194.6.2.173]) by hub.freebsd.org (Postfix) with ESMTP id 11C6737B406 for ; Tue, 19 Jun 2001 02:54:11 -0700 (PDT) (envelope-from ADyas@twowaytv.com) Received: by exchange.twowaytv.co.uk with Internet Mail Service (5.5.2653.19) id ; Tue, 19 Jun 2001 10:50:49 +0100 Message-ID: <911D8F660DF6D411B61F00500462BA019FF811@exchange.twowaytv.co.uk> From: Alex Dyas To: freebsd-questions@freebsd.org Subject: RE: X application without starting a desktop Date: Tue, 19 Jun 2001 10:50:49 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-7" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > #! /bin/sh (<-- btw. what's the meaning/use of this comment?) > # .xinitrc > > # start fvwm2 > exec fvwm2 & this is not strictly necessary, and probably not worth it if you only want to run one app. > # ...and start some nice progs > exec xterm & > exec xeyes & This is where you want to run your x-app, so instead of xterm and xeyes you put something like: exec & > # EOF > > When I startx, the Xserver starts loading and then shuts down. > > When I tried to run fvwm2 directly from the prompt: > # fvwm2 & > > I got a "Can't open display" <> This is because fvwm2 is an X application itself, and as such it needs an X server running. This is why it is included as one of the programs to run in your xinitrc. As I said, you probably don't need a window manager at all if all you're trying to do is run one app. alex.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 2:54:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.nikoma.de (smtp1.nikoma.de [212.122.128.19]) by hub.freebsd.org (Postfix) with ESMTP id 39B2537B401 for ; Tue, 19 Jun 2001 02:54:29 -0700 (PDT) (envelope-from chub@nikocity.de) Received: from dialin104.pg1-nt.frankfurt.nikoma.de (dialin104.pg1-nt.frankfurt.nikoma.de [213.54.32.104]) by smtp1.nikoma.de (8.9.3/8.9.3) with ESMTP id LAA73085 for ; Tue, 19 Jun 2001 11:54:27 +0200 (CEST) (envelope-from chub@nikocity.de) Date: Tue, 19 Jun 2001 11:51:01 +0200 From: Chris Huben X-Mailer: The Bat! (v1.52f) Personal X-Priority: 3 (Normal) Message-ID: <41691759.20010619115101@nikocity.de> To: freebsd-questions@FreeBSD.ORG Subject: Cannot mount DVDROM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Seems I forgot to include my full name, sorry..... O.k. here we go again: I am having problems with mounting my dvd-rom. I've installed FreeBSD 4.3. When I try to mount via: #mount /cdrom the following message occurs: cd9660: /dev/acd0c: Invalid argument When I try: #mount /dev/acd0c /cdrom it says: acd0: READ_CD command timeout ..resetting ata: resetting devices.......done panic: vm_fault: fault on nofault entry, addr c684a000 and the system crashes. The dmesg entry is as follows: acd0: DVD-ROM at ata1-master using PIO4 The fstab entry is acd0c ......blah The drive is connected to the secondary IDE port as a master. Mainboard ASUS A7V133 Bios 1.4 Thanks in advance for your help. Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 3: 4:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hq.admiral.ru (hq.admiral.ru [217.146.192.17]) by hub.freebsd.org (Postfix) with ESMTP id 8B0D937B403 for ; Tue, 19 Jun 2001 03:04:29 -0700 (PDT) (envelope-from igor@mordor.admiral.ru) Received: from mordor.admiral.ru (ip147-192.admiral.ru [217.146.192.147] (may be forged)) by hq.admiral.ru (8.9.3/8.9.2) with ESMTP id OAA88698 for ; Tue, 19 Jun 2001 14:04:23 +0400 (MSD) (envelope-from igor@mordor.admiral.ru) Received: (from igor@localhost) by mordor.admiral.ru (8.11.4/8.11.3) id f5J9eqs02389 for freebsd-questions@FreeBSD.ORG; Tue, 19 Jun 2001 13:40:52 +0400 (MSD) (envelope-from igor) Date: Tue, 19 Jun 2001 13:40:52 +0400 From: Igor Robul To: freebsd-questions@FreeBSD.ORG Subject: Re: X application without starting a desktop Message-ID: <20010619134052.C2321@mordor.admiral.ru> Reply-To: igorr@admiral.ru Mail-Followup-To: Igor Robul , freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from andrei.popov@citicorp.com on Tue, Jun 19, 2001 at 08:51:59AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 08:51:59AM +0100, andrei.popov@citicorp.com wrote: > > Is it possible to run an XWindows application without > > starting KDE (or Gnome etc..) ? > > (Something like launching the application together with the > > Xserver at its minimum..) > > put it into your ~/.xinitrc or ~/.xsession file like so: > > #! /bin/sh > # .xinitrc > > # start fvwm2 > exec fvwm2 & > > # ...and start some nice progs > exec xterm & > exec xeyes & but without 'exec' because exec will replace .xinitrc's shell with another program. So: export LANG=ru_RU.KOI8-R # <-- this is for xdm started sessions xsetroot -solid SlateGray xbiff -geometry -0-65 & xclock -digital -geometry -0-0 & xterm & exec mwm # <---------------- We don't need .xinitrc anymore To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 3:15:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by hub.freebsd.org (Postfix) with SMTP id 3204537B406 for ; Tue, 19 Jun 2001 03:15:50 -0700 (PDT) (envelope-from r.j.s@gmx.net) Received: (qmail 16251 invoked by uid 0); 19 Jun 2001 10:15:48 -0000 Received: from kabel203069.kabel.utwente.nl (HELO Rogier) (130.89.203.69) by mail.gmx.net (mail08) with SMTP; 19 Jun 2001 10:15:48 -0000 Date: Tue, 19 Jun 2001 12:15:48 +0200 (CEST) From: Rogier Steehouder Reply-To: Rogier Steehouder To: Bjarne Wichmann Petersen Cc: FreeBSD-Questions Mailing List Subject: Re: How to run kdm In-Reply-To: <20010619084314.3b5908c0.mekanix@privat.dk> Message-ID: <20010619120909.S413-100000@rhosgobel.none> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG E-mail from freebsd-questions-admin@spitfire.velocet.net, sent 19-06-2001: > On Mon, 18 Jun 2001 14:56:45 +0200 (MES) > Carsten Reimer wrote: > > > It is started on booting time from a > > startup-script in /usr/local/etc/rc.d . > > I'd like to know a little more on how you start kdm. I've tried just > running kdm of /etc/rc.conf which starts kdm fine, but it locks out all > keyinput but not mouse. > > Running kdm of a root-prompt works fine, so kdm is configured correct. I have the following file /usr/local/etc/rc.d/kdm.sh (permissions 0700): --= Begin /usr/local/etc/rc.d/kdm.sh =-- #!/bin/sh case "$1" in [Ss][Tt][Aa][Rr][Tt]) /usr/local/bin/kdm & && echo -n " kdm" ;; esac --= End =-- No problems at all. I first edited /etc/ttys, but that caused problems similar to yours. (I couldn't even switch back to a normal console to have root access!) With kind regards, Rogier Steehouder -- ___ _ -O_\ // | / Rogier Steehouder //\ / \ rjs@gmx.net // \ <---------------------- 90m ----------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 3:16:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from everest.wananchi.com (everest.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 82FC137B401 for ; Tue, 19 Jun 2001 03:16:07 -0700 (PDT) (envelope-from wash@wananchi.com) Received: from wash by everest.wananchi.com with local (Exim 3.22 #2) id 15CIYS-000BNE-00 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 13:16:16 +0300 Date: Tue, 19 Jun 2001 13:16:16 +0300 From: Odhiambo Washington To: "freebsd-questions@freebsd.org" Subject: Re: single user Message-ID: <20010619131616.B41408@everest.wananchi.com> Mail-Followup-To: Odhiambo Washington , "freebsd-questions@freebsd.org" References: <20010619084603.45955.qmail@web11904.mail.yahoo.com> <3B2F1543.A42FEEA1@jak.nl> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="OwLcNYc0lM97+oe1" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3B2F1543.A42FEEA1@jak.nl>; from "Arjan Knepper" on Tue, Jun 19, 2001 at 11:02:59AM +0200 X-Disclaimer: My opinions do not necessarily represent those of my employer. X-Operating-System: FreeBSD 4.3-STABLE i386 X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 1:07PM up 27 days, 2:09, 2 users, load averages: 0.17, 0.22, 0.18 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --OwLcNYc0lM97+oe1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * Arjan Knepper [20010619 11:59]: writing on the subject 'Re= : single user' Arjan> Reboot in single user mode Arjan>=20 Arjan> - reboot Arjan> - boot -s Arjan> - mount filesystems Arjan> you should be able to edit anything you want AS ROOT Arjan>=20 Arjan> see : Arjan> http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#FORG= OT-ROOT-PW Did I hear that he setup such that even single user mode even asks for password? Fixit??? Arjan>=20 Arjan> richard harris wrote: Arjan>=20 Arjan> > Hi... Arjan> > I prevent booting FreeBSD into the single user mode Arjan> > with this path Arjan> > in /etc/ttys:# Arjan> > # This entry needed for asking password when init goes Arjan> > to single-usermode Arjan> > # If you want to be asked for password, change Arjan> > "secure" to "insecure"here Arjan> > console none unknown off secure Arjan> > Arjan> > but right now i forgot my root password, so what can i Arjan> > do??? Arjan> > Arjan> > __________________________________________________ Arjan> > Do You Yahoo!? Arjan> > Spot the hottest trends in music, movies, and more. Arjan> > http://buzz.yahoo.com/ Arjan> > Arjan> > To Unsubscribe: send mail to majordomo@FreeBSD.org Arjan> > with "unsubscribe freebsd-questions" in the body of the message Arjan>=20 Arjan>=20 Arjan> To Unsubscribe: send mail to majordomo@FreeBSD.org Arjan> with "unsubscribe freebsd-questions" in the body of the message -Wash -- Odhiambo Washington Wananchi Online Ltd., wash@wananchi.com 1st Flr Loita Hse. Tel: 254 2 313985 Loita Street., Fax: 254 2 313922 PO Box 10286,00100-NAIROBI,KE. Don't drink when you drive -- you might hit a bump and spill it.=20 --OwLcNYc0lM97+oe1 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE7LyZwn7LIsuxjem8RAkQtAKCCQN4y7pwEXGdkZVietGQ9jIIOfACeP8wq H9uWKuNCQSbHrhyUjRosKLI= =XPl2 -----END PGP SIGNATURE----- --OwLcNYc0lM97+oe1-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 3:49:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heard.com.au (heard.com.au [203.53.37.162]) by hub.freebsd.org (Postfix) with SMTP id E6B5937B403 for ; Tue, 19 Jun 2001 03:49:08 -0700 (PDT) (envelope-from hmag@ozemail.com.au) Received: from [203.53.37.188] ([203.53.37.188] verified) by heard.com.au (Stalker SMTP Server 1.8b8) with ESMTP id S.0000018148 for ; Tue, 19 Jun 2001 20:49:05 +1000 X-Sender: hmag@pop.ozemail.com.au Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@FreeBSD.ORG From: Terry Allen Subject: BSD Problem 2 Date: Tue, 19 Jun 2001 20:49:06 +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again, Thanks for all the replies I got about my installation problem. Creating a pair of boot floppies (on the DOS card in my Mac no less!) under MS DOS, did the trick & the install went OK, finding the CD ROM drive. I selected the 'All' option to install, but some stuff seems to be missing, like the X window server etc..., so I'll do another install this weekend & see how it goes. I've never seriously used any UNIX, so I have a big learning curve. I want the BSD machine to run as a server (http, ftp, email etc...) & I want to admin it with Webmin - does Webmin come on the install disk for 4.3? Once again, many thanks for the assistance. I'll subscribe to the mailing list properly in the next couple of days. Bye for now, Terry Allen ___________________________________________________________________ hEARd Postal Address: hEARd c/o 128 The Entrance Rd The Entrance NSW 2261 Australia Internet - WWW: http://heard.com.au or http://www.ozemail.com.au/~hmag Interactive Message Board - http://heard.com.au/wwwboard/ EMAIL: (checked every Thursday & Sunday, sometimes more often) hmag@ozemail.com.au ---------------------------------- Non profit promotion for new music ---------------------------------- Also, check out the Educate site - http://www.educate.net.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 4: 1:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from algonet.se (sinclair.tninet.se [195.100.94.101]) by hub.freebsd.org (Postfix) with ESMTP id BB38537B401 for ; Tue, 19 Jun 2001 04:01:17 -0700 (PDT) (envelope-from gus@algonet.se) Received: from laptop (du46-252.ppp.algonet.se [195.100.252.46]) by sinclair.tninet.se (BLUETAIL Mail Robustifier 2.2.2) with ESMTP id 480188.948472.992sinclair-s1 for ; Tue, 19 Jun 2001 13:01:12 +0200 From: Gustaf Tham To: freebsd-questions@FreeBSD.org Subject: MO-drive w 2048 B/sectors in 4.3 ? Date: Tue, 19 Jun 2001 12:59:25 +0200 Message-ID: X-Mailer: Forte Agent 1.8/32.548 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I posted this question twice in FreeBSD.questions, but no one has responded. I would appreciate it very much if anyone can shed some light on this.. I can use my MO-drive OK with 540MB disks, which are 512 bytes/sector, but not with larger disks, which are all 2048 bytes/sector. Any operation (disklabel, newfs, mount) results in error messages about slices starting/extending beyond end of disk. I'm running 4.3 stable. Now, the od driver can handle larger sectors. But - the od driver has been removed. The reason for this is allegedly that most features of the od driver are now included in the da driver, which I use. Can the da driver actually handle 2048 b/sector disks? Thanks Gustaf To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 4:14: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 9A4D037B406 for ; Tue, 19 Jun 2001 04:14:00 -0700 (PDT) (envelope-from jcm@freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97] ident=root) by probity.mcc.ac.uk with esmtp (Exim 2.05 #7) id 15CJSJ-000DpQ-00; Tue, 19 Jun 2001 12:13:59 +0100 Received: (from jcm@localhost) by dogma.freebsd-uk.eu.org (8.11.3/8.11.1) id f5JBDvt70108; Tue, 19 Jun 2001 12:13:57 +0100 (BST) (envelope-from jcm) Date: Tue, 19 Jun 2001 12:13:56 +0100 From: j mckitrick To: Giorgos Keramidas Cc: freebsd-questions@FreeBSD.ORG Subject: Re: best permissions for local CVS tree? Message-ID: <20010619121356.A70030@dogma.freebsd-uk.eu.org> References: <20010616221534.A93020@dogma.freebsd-uk.eu.org> <20010617031821.A2091@hades.hell.gr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20010617031821.A2091@hades.hell.gr>; from keramida@ceid.upatras.gr on Sun, Jun 17, 2001 at 03:18:23AM +0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG So, do you login as ncvs when you want to update sources? Also, when i run cvs, it complains about being run anywhere but /usr. How do you get it to run in /usr/src? | I have done `adduser ncvs' and I use cvs in read-only mode to checkout | my /usr/src and /usr/ports and whatever from it. All the files in | /home/ncvs are under CVSup's control, and I just use: | | # cd /usr/src | # cvs -R -d /home/ncvs update -P -A -d | | to update my sources :-) The trick here is to use -R option, to tell | cvs that it should not attempt to write anything in the repository, | since it's read-only. [ Well, for root, it actually isn't read-only, | but I also use the same repository from my normal 'charon' user, and | the -R option has saved me a lot of trouble.] | | -giorgos Jonathon -- "It is through will alone I set my mind in motion...." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 4:17:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fe4.in.gr (fe4.in.gr [194.63.247.168]) by hub.freebsd.org (Postfix) with ESMTP id 179DD37B401 for ; Tue, 19 Jun 2001 04:17:35 -0700 (PDT) (envelope-from midiostri@in.gr) Received: from mail2.internal.ramnet.gr (mail2.mgmt.in.gr [194.63.247.202]) by fe4.in.gr (8.11.3/8.11.3) with ESMTP id f5JBFX616158; Tue, 19 Jun 2001 14:15:38 +0300 (EEST) Received: from mail pickup service by mail2.internal.ramnet.gr with Microsoft SMTPSVC; Tue, 19 Jun 2001 14:09:23 +0300 Content-Class: urn:content-classes:message From: To: Cc: , Subject: Re: X application without starting a desktop Date: Tue, 19 Jun 2001 14:09:23 +0300 Message-ID: <1376801c0f8b0$4be5ae50$0205030a@internal.ramnet.gr> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-7" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft CDO for Windows 2000 Thread-Index: AcD4sEvlagV+D2SbEdWcoACQJ6JV2g== X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG alex adviced me: >This is where you want to run your x-app, so instead of xterm and xeyes = you >put something like: >exec & Yes! That's the solution. I put this single line in my .xinitrc and my=20 application started together with the Xserver and nothing else. = Beautifull :) One detail: The above line didn't work with the ampersand. It seems that = the last application that starts in .xinitrc must be ampersandless.. --------- Igor adviced: >export LANG=3Dru_RU.KOI8-R # <-- this is for xdm started sessions >xsetroot -solid SlateGray >xbiff -geometry -0-65 & >xclock -digital -geometry -0-0 & >xterm & >exec mwm # <---------------- We don't need .xinitrc anymore Well, I tried it but X doens't start (it seems it can't find mwm! I = commented the last line but again, X won't start). Thanks for helping everybody! :) Dimitri To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 4:30:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from everest.wananchi.com (everest.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 3313737B403 for ; Tue, 19 Jun 2001 04:29:55 -0700 (PDT) (envelope-from wash@wananchi.com) Received: from wash by everest.wananchi.com with local (Exim 3.22 #2) id 15CJhm-000DrS-00 for freebsd-questions@FreeBSD.org; Tue, 19 Jun 2001 14:29:58 +0300 Date: Tue, 19 Jun 2001 14:29:57 +0300 From: Odhiambo Washington To: FBSD-Q Subject: How do they do it? Message-ID: <20010619142957.D51218@everest.wananchi.com> Mail-Followup-To: Odhiambo Washington , FBSD-Q Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="xesSdrSSBC0PokLI" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Disclaimer: My opinions do not necessarily represent those of my employer. X-Operating-System: FreeBSD 4.3-STABLE i386 X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 2:27PM up 27 days, 3:29, 2 users, load averages: 0.14, 0.14, 0.12 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --xesSdrSSBC0PokLI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Sorry for the irrelevant $SUBJECT. I want to implement a process that will tell me when a user last POPped their e-mail. If I do a finger for $USER, right now I get wash:~$ f doe Login: doe Name: doe Directory: /home/doe Shell: /nonexistent Never logged in. New mail received Mon Jun 18 19:58 2001 (EAT) Unread since Wed Jun 13 17:01 2001 (EAT) No Plan. =2E..but I'd like something that says: Mail last POPped on Mon Jun 18 19:58 2001 (EAT) I've seen that with some servers but how do they do it? MTIA -Wash -- Odhiambo Washington Wananchi Online Ltd., wash@wananchi.com 1st Flr Loita Hse. Tel: 254 2 313985 Loita Street., Fax: 254 2 313922 PO Box 10286,00100-NAIROBI,KE. It is by no means certain that our individual personality is the single=20 inhabitant of these our corporeal frames... We all do things both awake and= =20 asleep which surprise us. Perhaps we have cotenants in this house we live i= n.=20 -Oliver Wendell Holmes, "The Guardian Angel"=20 --xesSdrSSBC0PokLI Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE7Lze1n7LIsuxjem8RAk04AKCuXuplkJx+YuOhFzXI+OXtcibXngCfYD/z aAum2j0ufSDR8+QAzTOXziU= =O8J4 -----END PGP SIGNATURE----- --xesSdrSSBC0PokLI-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:17:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from trap.geckobot.com (mail.geckobot.com [64.81.103.90]) by hub.freebsd.org (Postfix) with ESMTP id B67B537B406 for ; Tue, 19 Jun 2001 05:17:24 -0700 (PDT) (envelope-from rick@geckobot.com) Received: from patches (patches.geckobot.com [192.168.254.4]) by trap.geckobot.com (8.11.3/8.9.3) with SMTP id f5JCC7419441; Tue, 19 Jun 2001 05:12:08 -0700 (MST) (envelope-from rick@geckobot.com) Reply-To: From: "Rick Moore" To: "'Ted Mittelstaedt'" , "'Erik Trulsson'" Cc: Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade Date: Tue, 19 Jun 2001 05:13:52 -0700 Message-ID: <000201c0f8b9$4ea26e40$04fea8c0@patches> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <001001c0f88c$cb1c18e0$1401a8c0@tedm.placo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Ted! I am under the impression that I was running UDMA before, but I don't ever recall verifying it. Sorry I don't have a more definitive answer. Using sysctrl I've confirmed that I'm running UDMA now... Rick > -----Original Message----- > From: Ted Mittelstaedt [mailto:tedm@toybox.placo.com] > Sent: Monday, June 18, 2001 11:55 PM > To: rick@geckobot.com; Erik Trulsson > Cc: freebsd-questions@FreeBSD.ORG > Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade > > > Just a question, > > Were you running ULTRA DMA under 4.0 or were you running PIO > mode? > > Ted Mittelstaedt tedm@toybox.placo.com > Author of: The FreeBSD Corporate Networker's Guide > Book website: http://www.freebsd-corp-net-guide.com > > > >-----Original Message----- > >From: owner-freebsd-questions@FreeBSD.ORG > >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Rick > >Sent: Monday, June 18, 2001 4:43 PM > >To: Erik Trulsson > >Cc: freebsd-questions@FreeBSD.ORG > >Subject: Re: Significant Performance Drop during 4.0-4.3 Upgrade > > > > > >Hi Erik- > > > >Thanks for responding so quickly! Unless I did something wrong, > >that didn't > >seem to do the trick. I sure thought it was going to work, though. > > > >I added the following line to /boot/defaults/loader.conf: > > > >hw.ata.wc="1" > > > >...and rebooted but the performance hasn't picked up to > where it was with > >FreeBSD 4.0. It may have gone up some-- I haven't been tracking > >the numbers > >very closely. > > > >By coincidence, one of the three systems was upgraded to FreeBSD > >4.3 STABLE > >instead of RELEASE, and it too shows roughly the same > performance metrics. > > > >If I didn't do this right, please let me know. Otherwise if > you or anyone > >has other thoughts, I'd be happy to give them a try. > > > >Rick > > > >BTW- I'm not sure it's worth mentioning, but I still don't see any > >of this in > >the 4.3 RELEASE notes... > > > > > > > >On Monday 18 June 2001 14:07, Erik Trulsson wrote: > >> On Mon, Jun 18, 2001 at 01:44:23PM -0700, Rick wrote: > >> > Hi! > >> > > >> > I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using > >sysinstall, and I > >> > noticed that some rm -r operations seemed a little slow after the > >> > upgrade. > >> > > >> > Coincidentally I've been working on an ISAM alternative > to B-tree so I > >> > have a bunch of performance benchmarks handy. The results: > >> > > >> > Disk hits are *much* slower after the upgrade. Many > times slower, in > >> > fact. I also had Berkley DB benchmarks that I was using > for comparison > >> > and they too were heavily impacted. > >> > > >> > For the life of me, I can't figure out what the heck happened! > >> > SOFTUPDATES were off before the upgrade and I didn't > change of the disk > >> > tuning. I did tweak my kernel a bit, but nothing should > have had this > >> > effect-- I just removed a few things that weren't being > used like EISA > >> > and some network cards. When I examine dmesg everything > still seems to > >> > be recognized as ULTRA DMA, etc. I've tried putting > everything back in > >> > my kernel and I've try the GENERIC kernel with no improvements. > >> > > >> > I've looked through the release notes, etc., and couldn't find > >anythingd > >> > etailing this problem. Did I miss something? Am I just > extra lucky? > >> > >> Yes, you missed one small thing. Write caching for IDE disks were > >> turned off by default in 4.3-RELEASE. It has since been > turned back on > >> in 4.3-STABLE on since the performance hit was too big. > >> (The reason it was turned off is that if you have the write-cache > >> turned on can result in serious data-loss if you have a > power failure.) > >> > >> You can turn it back on by setting hw.ata.wc=1 from the loader. > >> See the manpages for ata(4) and loader(8) for more information. > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:17:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vargas.fst.com.br (vargas.fst.com.br [200.239.209.9]) by hub.freebsd.org (Postfix) with ESMTP id 3CDC337B401 for ; Tue, 19 Jun 2001 05:16:18 -0700 (PDT) (envelope-from info@industriavirtual.com.br) Received: from mail pickup service by vargas.fst.com.br with Microsoft SMTPSVC; Tue, 19 Jun 2001 09:06:09 -0300 From: To: Subject: IV-News (19/6/2001): Loja Virtual Date: Tue, 19 Jun 2001 09:06:08 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_5CB0_01C0F89F.142F5A30" X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Message-ID: X-OriginalArrivalTime: 19 Jun 2001 12:06:09.0282 (UTC) FILETIME=[39BE5620:01C0F8B8] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_5CB0_01C0F89F.142F5A30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =09 Loja Virtual: Inform=E1tica A Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. Trata-se de = uma loja virtual completa que funciona independente ou anexada a qualquer website existente. =09 Apresenta=E7=E3o...P=E1gina Inicial A loja Virtual recebe os visitantes com a apresenta=E7=E3o da sua = empresa, com links para as categorias de produtos (hardware, software, acess=F3rios, suprimentos etc.), p=E1gina de ajuda, p=E1gina de contato = etc..=09 =09 Vitrine de produtos...Vitrine de Produtos O visitante percorre as categorias de produtos como quem visita os corredores de um supermercado, escolhe a quantidade de cada mercadoria que deseja adquirir e as coloca na Lista de Compras.=09 =09 Lista de Compras...Lista de Compras Depois de escolher os produtos, o visitante dirige-se ao caixa para que o frete, o valor m=EDnimo da compra, o valor do pedido e a quantidade = dos itens sejam confirmados e calculados.=09 =09 Cadastro de clientes...Cadastro de Cliente Se for a primeira compra do visitante, ele ser=E1 automaticamente = enviado =E0 p=E1gina de cadastro. Ele receber=E1 uma senha que lhe permitir=E1 realizar compras como = cliente cadastrado.=09 =09 Formas de pagamento...Pagamento Para finalizar, o cliente escolhe a forma de pagamento e o pedido =E9 efetuado. A Industria Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas de pagamento online.=09 =09 Envio do Pedido Em poucos segundos, voc=EA receber=E1 o pedido do cliente via e-mail. Ent=E3o =E9 s=F3 embalar e despachar a encomenda! A Industria Virtual poder=E1 ajudar sua empresa a montar um eficiente sistema de log=EDstica para que atenda perfeitamente seus clientes.=09 =09 E tem mais... * A Loja Virtual pode ser perfeitamente adaptada ao visual de seu website e possui um setor de administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s do qual a qualquer momento, poder=E1 incluir, excluir ou alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet. * Pre=E7os =E0 partir de R$ 300,00. Pagamento em at=E9 3 vezes iguais. * Descontos especiais para provedores e webmasters. * Clique aqui para ver uma loja em funcionamento. =20 F=F3runs... F=F3runs Chats... Chats =20 Guest-Books =20 Cart=F5esPostais =20 PesquisaOnLine =20 Cadastro de Visitantes =20 Not=EDcias e Novidades =20 Centro de Mensagens E muito mais... Para maiores informa=E7=F5es, solicite a visita de um de nossos representantes: (21) 9132-4892 ou visite o nosso site na Internet: http://www.industriavirtual.com.br.=09 Clique aqui para remover seu e-mail do nosso cadastro. Copyright =A92001 by Industria Virtual =20 ------=_NextPart_000_5CB0_01C0F89F.142F5A30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Loj= a Virtual: Inform=E1tica
3D'Loja

A = Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. = Trata-se de uma loja virtual completa que funciona independente ou = anexada a qualquer website existente.

3D'Apresenta=E7=E3o...'P=E1gina Inicial
A loja Virtual recebe os = visitantes com a apresenta=E7=E3o da sua empresa, com links para as = categorias de produtos (hardware, software, acess=F3rios, suprimentos = etc.), p=E1gina de ajuda, p=E1gina de contato etc..
3D'VitrineVitrine de Produtos
O visitante percorre as = categorias de produtos como quem visita os corredores de um = supermercado, escolhe a quantidade de cada mercadoria que deseja = adquirir e as coloca na Lista de Compras.
3D'ListaLista de Compras
Depois de escolher os = produtos, o visitante dirige-se ao caixa para que o frete, o valor = m=EDnimo da compra, o valor do pedido e a quantidade dos itens sejam = confirmados e calculados.
3D'CadastroCadastro de Cliente
Se for a = primeira compra do visitante, ele ser=E1 automaticamente enviado =E0 = p=E1gina de cadastro.
Ele receber=E1 uma senha que lhe = permitir=E1 realizar compras como cliente cadastrado.
3D'FormasPagamento
Para finalizar, o cliente escolhe a = forma de pagamento e o pedido =E9 efetuado.
A Industria = Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas = de pagamento online.
Envio do Pedido
Em = poucos segundos, voc=EA receber=E1 o pedido do cliente via = e-mail.
Ent=E3o =E9 s=F3 embalar e despachar a encomenda!
A = Industria Virtual poder=E1 ajudar sua empresa a montar um = eficiente sistema de log=EDstica para que atenda perfeitamente seus = clientes.
E tem = mais...
  • A Loja Virtual pode ser perfeitamente = adaptada ao visual de seu website e possui um setor de = administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s = do qual a qualquer momento, poder=E1 incluir, excluir ou = alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet.
  • Pre=E7os =E0 = partir de R$ 300,00. Pagamento em at=E9 3 vezes = iguais.
  • Descontos especiais para provedores e = webmasters.
  • Clique aqui para ver uma loja em = funcionamento.

3D'F=F3runs...'
F=F3runs

3D'Chats...'
Chats


Guest-Books


Cart=F5esPostais


PesquisaOnLine


Cadastro
de Visitantes


Not=EDcias e
Novidades


Centro de
Mensagens

E muito mais...

Para maiores informa=E7=F5es, = solicite a visita de um de nossos representantes: (21) 9132-4892
ou = visite o nosso site na Internet: = http://www.industriavirtual.com.br.

Clique aqui para remover seu e-mail do = nosso cadastro.
Copyright =A92001 by Industria = Virtual
------=_NextPart_000_5CB0_01C0F89F.142F5A30-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:17:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vargas.fst.com.br (vargas.fst.com.br [200.239.209.9]) by hub.freebsd.org (Postfix) with ESMTP id AD90037B40A for ; Tue, 19 Jun 2001 05:17:16 -0700 (PDT) (envelope-from info@industriavirtual.com.br) Received: from mail pickup service by vargas.fst.com.br with Microsoft SMTPSVC; Tue, 19 Jun 2001 09:06:12 -0300 From: To: Subject: IV-News (19/6/2001): Loja Virtual Date: Tue, 19 Jun 2001 09:06:11 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_5CDC_01C0F89F.160DB720" X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Message-ID: X-OriginalArrivalTime: 19 Jun 2001 12:06:12.0306 (UTC) FILETIME=[3B8BC320:01C0F8B8] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_5CDC_01C0F89F.160DB720 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =09 Loja Virtual: Inform=E1tica A Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. Trata-se de = uma loja virtual completa que funciona independente ou anexada a qualquer website existente. =09 Apresenta=E7=E3o...P=E1gina Inicial A loja Virtual recebe os visitantes com a apresenta=E7=E3o da sua = empresa, com links para as categorias de produtos (hardware, software, acess=F3rios, suprimentos etc.), p=E1gina de ajuda, p=E1gina de contato = etc..=09 =09 Vitrine de produtos...Vitrine de Produtos O visitante percorre as categorias de produtos como quem visita os corredores de um supermercado, escolhe a quantidade de cada mercadoria que deseja adquirir e as coloca na Lista de Compras.=09 =09 Lista de Compras...Lista de Compras Depois de escolher os produtos, o visitante dirige-se ao caixa para que o frete, o valor m=EDnimo da compra, o valor do pedido e a quantidade = dos itens sejam confirmados e calculados.=09 =09 Cadastro de clientes...Cadastro de Cliente Se for a primeira compra do visitante, ele ser=E1 automaticamente = enviado =E0 p=E1gina de cadastro. Ele receber=E1 uma senha que lhe permitir=E1 realizar compras como = cliente cadastrado.=09 =09 Formas de pagamento...Pagamento Para finalizar, o cliente escolhe a forma de pagamento e o pedido =E9 efetuado. A Industria Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas de pagamento online.=09 =09 Envio do Pedido Em poucos segundos, voc=EA receber=E1 o pedido do cliente via e-mail. Ent=E3o =E9 s=F3 embalar e despachar a encomenda! A Industria Virtual poder=E1 ajudar sua empresa a montar um eficiente sistema de log=EDstica para que atenda perfeitamente seus clientes.=09 =09 E tem mais... * A Loja Virtual pode ser perfeitamente adaptada ao visual de seu website e possui um setor de administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s do qual a qualquer momento, poder=E1 incluir, excluir ou alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet. * Pre=E7os =E0 partir de R$ 300,00. Pagamento em at=E9 3 vezes iguais. * Descontos especiais para provedores e webmasters. * Clique aqui para ver uma loja em funcionamento. =20 F=F3runs... F=F3runs Chats... Chats =20 Guest-Books =20 Cart=F5esPostais =20 PesquisaOnLine =20 Cadastro de Visitantes =20 Not=EDcias e Novidades =20 Centro de Mensagens E muito mais... Para maiores informa=E7=F5es, solicite a visita de um de nossos representantes: (21) 9132-4892 ou visite o nosso site na Internet: http://www.industriavirtual.com.br.=09 Clique aqui para remover seu e-mail do nosso cadastro. Copyright =A92001 by Industria Virtual =20 ------=_NextPart_000_5CDC_01C0F89F.160DB720 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Loj= a Virtual: Inform=E1tica
3D'Loja

A = Industria Virtual apresenta o seu novo m=F3dulo de com=E9rcio = eletr=F4nico desenvolvido especialmente para a =E1rea de inform=E1tica. = Trata-se de uma loja virtual completa que funciona independente ou = anexada a qualquer website existente.

3D'Apresenta=E7=E3o...'P=E1gina Inicial
A loja Virtual recebe os = visitantes com a apresenta=E7=E3o da sua empresa, com links para as = categorias de produtos (hardware, software, acess=F3rios, suprimentos = etc.), p=E1gina de ajuda, p=E1gina de contato etc..
3D'VitrineVitrine de Produtos
O visitante percorre as = categorias de produtos como quem visita os corredores de um = supermercado, escolhe a quantidade de cada mercadoria que deseja = adquirir e as coloca na Lista de Compras.
3D'ListaLista de Compras
Depois de escolher os = produtos, o visitante dirige-se ao caixa para que o frete, o valor = m=EDnimo da compra, o valor do pedido e a quantidade dos itens sejam = confirmados e calculados.
3D'CadastroCadastro de Cliente
Se for a = primeira compra do visitante, ele ser=E1 automaticamente enviado =E0 = p=E1gina de cadastro.
Ele receber=E1 uma senha que lhe = permitir=E1 realizar compras como cliente cadastrado.
3D'FormasPagamento
Para finalizar, o cliente escolhe a = forma de pagamento e o pedido =E9 efetuado.
A Industria = Virtual poder=E1 orientar a sua empresa quanto aos diversos sistemas = de pagamento online.
Envio do Pedido
Em = poucos segundos, voc=EA receber=E1 o pedido do cliente via = e-mail.
Ent=E3o =E9 s=F3 embalar e despachar a encomenda!
A = Industria Virtual poder=E1 ajudar sua empresa a montar um = eficiente sistema de log=EDstica para que atenda perfeitamente seus = clientes.
E tem = mais...
  • A Loja Virtual pode ser perfeitamente = adaptada ao visual de seu website e possui um setor de = administra=E7=E3o, acess=EDvel somente ao propriet=E1rio, atrav=E9s = do qual a qualquer momento, poder=E1 incluir, excluir ou = alterar as caracter=EDsticas e pre=E7os dos produtos, = utilizando qualquer micro conectado =E0 Internet.
  • Pre=E7os =E0 = partir de R$ 300,00. Pagamento em at=E9 3 vezes = iguais.
  • Descontos especiais para provedores e = webmasters.
  • Clique aqui para ver uma loja em = funcionamento.

3D'F=F3runs...'
F=F3runs

3D'Chats...'
Chats


Guest-Books


Cart=F5esPostais


PesquisaOnLine


Cadastro
de Visitantes


Not=EDcias e
Novidades


Centro de
Mensagens

E muito mais...

Para maiores informa=E7=F5es, = solicite a visita de um de nossos representantes: (21) 9132-4892
ou = visite o nosso site na Internet: = http://www.industriavirtual.com.br.

Clique aqui para remover seu = e-mail do nosso cadastro.
Copyright =A92001 by Industria = Virtual
------=_NextPart_000_5CDC_01C0F89F.160DB720-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:18: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f256.law7.hotmail.com [216.33.236.134]) by hub.freebsd.org (Postfix) with ESMTP id AE55737B40B for ; Tue, 19 Jun 2001 05:18:04 -0700 (PDT) (envelope-from modyguard@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 05:18:04 -0700 Received: from 62.114.199.38 by lw7fd.law7.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 12:18:04 GMT X-Originating-IP: [62.114.199.38] From: "Still Loving You" To: freebsd-questions@FreeBSD.org Subject: Please help.. Date: Tue, 19 Jun 2001 15:18:04 +0300 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 19 Jun 2001 12:18:04.0658 (UTC) FILETIME=[E4240D20:01C0F8B9] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hello.. first of all , i want to congratulate all those involved in generating and invinting such a great OS, really you all deserve the best. and 2nd i have a small problem installing the 4.3 realese of Freebsd, i have the following: - intel mmx 200mhz processor. - 420mb hd. wd. (use it all for the freebsd) - 64mb of ram - ne2000 compatible NIC ive copied the freebsd installation files in the c:\freebsd directory where i want to make minimal installation from the \bin dir. after configuring the media source to install from "DOS" partition i got the following: Error mounting /dev/ad0s2 on /dist invalid argument(22) what does this mean?? i tried to use the entire disk once then, i made 2 partitions c: for the installation and d: holding the source "Freebsd dir." and in both i got the above message then i informed to reconfigure the media once again.. thanx in advance.. Mohamed Hany. _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:21:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from everest.wananchi.com (everest.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 3C73E37B408 for ; Tue, 19 Jun 2001 05:21:19 -0700 (PDT) (envelope-from wash@wananchi.com) Received: from wash by everest.wananchi.com with local (Exim 3.22 #2) id 15CKV3-000FQV-00; Tue, 19 Jun 2001 15:20:53 +0300 Date: Tue, 19 Jun 2001 15:20:53 +0300 From: Odhiambo Washington To: igorr@admiral.ru Cc: FBSD-Q Subject: Re: How do they do it? Message-ID: <20010619152053.A58452@everest.wananchi.com> Mail-Followup-To: Odhiambo Washington , igorr@admiral.ru, FBSD-Q References: <20010619142957.D51218@everest.wananchi.com> <20010619160842.A88432@mordor.admiral.ru> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="OXfL5xGRrasGEqWY" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010619160842.A88432@mordor.admiral.ru>; from "Igor Robul" on Tue, Jun 19, 2001 at 04:08:43PM +0400 X-Disclaimer: My opinions do not necessarily represent those of my employer. X-Operating-System: FreeBSD 4.3-STABLE i386 X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 3:13PM up 27 days, 4:15, 1 user, load averages: 0.10, 0.13, 0.09 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * Igor Robul [20010619 15:07]: writing on the subj= ect 'Re: How do they do it?' Igor> On Tue, Jun 19, 2001 at 02:29:57PM +0300, Odhiambo Washington wrote: Igor> > ...but I'd like something that says: Igor> >=20 Igor> > Mail last POPped on Mon Jun 18 19:58 2001 (EAT) Igor> >=20 Igor> > I've seen that with some servers but how do they do it? Igor> I think you'll get idea:=20 Igor> #grep teapop /var/log/maillog | grep qqq@48hrs.spb.ru | tail -1 Igor> Jun 19 16:04:37 hosting teapop[27521]: qqq@48hrs.spb.ru[217.146.192.1= 47] 1 0 1 Yes. mail last Popped on Jun 19 16:04:37 from 217.146.192.147 This is in the current maillog. If they last popped mail yesterday it will not get it, yes? So what I am talking about is some daemon program (I guess) that (over)writes the user's .plan with this information everytime they POP mail. I am sure someone has done that before and scratching my held bald trying to reinvent that wheel is not a better thing to do. Their systems might differ from mine but the concept might not differ much?? -Wash -- Odhiambo Washington Wananchi Online Ltd., wash@wananchi.com 1st Flr Loita Hse. Tel: 254 2 313985 Loita Street., Fax: 254 2 313922 PO Box 10286,00100-NAIROBI,KE. Let us endeavour to live that when we come to die even the undertaker will = be=20 sorry.=20 -Mark Twain, "Pudd'nhead Wilson's Calendar"=20 (contributed by Richard Roberts)=20 --OXfL5xGRrasGEqWY Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE7L0Oln7LIsuxjem8RAmV7AJ0dRIHRU68MLVvlGJXhes7KyO4/MgCeO3GP G33GxnO7XxpQM971Mgi0G8A= =A1/G -----END PGP SIGNATURE----- --OXfL5xGRrasGEqWY-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 5:25: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cartman.ourservers.net (cartman.ourservers.net [216.233.120.236]) by hub.freebsd.org (Postfix) with ESMTP id B3D8C37B408 for ; Tue, 19 Jun 2001 05:25:01 -0700 (PDT) (envelope-from dcarmich@mail.ourservers.net) Received: by mail.ourservers.net (MX V5.2 AXP) id 6; Tue, 19 Jun 2001 07:24:59 -0500 Date: Tue, 19 Jun 2001 07:24:58 -0500 From: Douglas Carmichael To: freebsd-questions@freebsd.org Cc: webmaster@cdrom.com Message-ID: <009FDC19.68719645.6@mail.ourservers.net> Subject: When will FreeBSD subscription CDs start shipping again? MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG When will FreeBSD subscription CDs start shipping again? (I have been a subscriber since 2.2.2-RELEASE and still have not received my 4.3 CDs.) Also, is FreeBSD 5.0 on track for an end-of-summer release date? A prompt response will be appreciated. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 6:36: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 512D537B401 for ; Tue, 19 Jun 2001 06:36:07 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 59586 invoked by uid 100); 19 Jun 2001 13:36:06 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.21830.277392.837408@guru.mired.org> Date: Tue, 19 Jun 2001 08:36:06 -0500 To: Parker Brown Cc: questions@freebsd.org Subject: Re: BSD Internet Access Over CableTV In-Reply-To: <39590841@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Parker Brown types: > I've just retired my trusty 56K modem and opted for DSL-like speeds > (256/64) and "always on" through Charter Communications, my local Cable > TV company. Attachment is via UCB. > > My question is: before I go hacking through my configuration files, can > someone tell me if support for that kind of Internet connection exists > in BSD 4.3. Dmesg indicated that it located the Linksys UCB adaptor and > labelled it ugen0. Will I need to get a special driver? I think you'll need to *write* a special driver for it. If it's labelled as ugen0, it's not recognized as either a modem or ethernet internface, and you're not going to be able to use it. The best solution is to go back to Charter Communications and beat on them until you get a box that connects via ethernet instead of USB. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 6:43:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from core.usrlib.org (CC2-861.charter-stl.com [24.217.115.99]) by hub.freebsd.org (Postfix) with ESMTP id F0D7437B403 for ; Tue, 19 Jun 2001 06:43:52 -0700 (PDT) (envelope-from ajh3@core.usrlib.org) Received: by core.usrlib.org (Postfix, from userid 1001) id 8B4F7A813; Tue, 19 Jun 2001 08:42:27 -0500 (CDT) Date: Tue, 19 Jun 2001 08:42:27 -0500 From: Andrew Hesford To: midiostri@in.gr Cc: freebsd-questions@freebsd.org, igor@mordor.admiral.ru, ADyas@twowaytv.com Subject: Re: X application without starting a desktop Message-ID: <20010619084227.B15192@core.usrlib.org> References: <1376801c0f8b0$4be5ae50$0205030a@internal.ramnet.gr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1376801c0f8b0$4be5ae50$0205030a@internal.ramnet.gr>; from midiostri@in.gr on Tue, Jun 19, 2001 at 02:09:23PM +0300 X-Loop: Andrew Hesford Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 02:09:23PM +0300, midiostri@in.gr wrote: > alex adviced me: > > >This is where you want to run your x-app, so instead of xterm and xeyes you > >put something like: > > >exec & > > Yes! That's the solution. I put this single line in my .xinitrc and my > application started together with the Xserver and nothing else. Beautifull :) > > One detail: The above line didn't work with the ampersand. It seems that > the last application that starts in .xinitrc must be ampersandless.. This is correct, and I'm shocked so many people told you to put the ampersand in. The X server quits when it has no clients. This is so you can do something like select "exit" from your default window manager and have it kill XFree86. When you background the process with the ampersand, the server doesn't recognize that it has any clients running, so it quits right away. -- Andrew Hesford ajh3@usrlib.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 6:52:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 2242A37B403 for ; Tue, 19 Jun 2001 06:52:31 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 62214 invoked by uid 100); 19 Jun 2001 13:52:30 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.22814.490241.682502@guru.mired.org> Date: Tue, 19 Jun 2001 08:52:30 -0500 To: "Mark Sergeant" , Cc: questions@freebsd.org Subject: Re: can I tar and copy src & ports after cvsupping? In-Reply-To: <40932099@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mark Sergeant types: > This is in the archives. The easiest way to fix it is rm -rf > /usr/ports/www/jakarta-tomcat That fixes once for everyone, but some people find that it breaks again after it works the first time. In that case, you need to remove all the lines in /usr/sup/ports-all/checkout.cvs:. that have "jakarta-tomcat" in them. Mark > > On Tue, 19 Jun 2001 10:52:17 +1000 (EST), Keith Spencer said: > > > Hi again all, > > I am cvsupping 4.2 to 4.3 and this happens after > > nearly compoleteing the ports tree... > > > > SNIP 8< ++++++++++++++++++++++++++++++++++ > > > > edit ports/www/jakarta-tomcat/distinfo > > add delta 1.2 2001.04.08.13.09.03 dirk > > updater > > failed;/usr/ports/www/jakarta-tomcat/files#cvs.cvsup-1988.21342: > > Cannot create: Not a directory > > > > +++++++++++++++++++++++++++++++++++++++++ > > Even if I cvsup again it fails at thesame point. > > I dont use jakarta (whatever it is) How can I get > > around this??? > > I am stuck (as usual) > > Also PAM in the src tree on re cvsupping claims to hav > > a bad checksum and retfetches...Hmmm yet again! > > Life wasn't meant to be easy I guess! > > Thanks heaps > > Keith > > Mark Sergeant > Unix Systems Administrator > > Fortune follows... > > Never try to outstubborn a cat. > -- Lazarus Long, "Time Enough for Love" > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Mike Meyer http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 6:55:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id C68AF37B401 for ; Tue, 19 Jun 2001 06:55:44 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 63781 invoked by uid 100); 19 Jun 2001 13:55:44 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.23008.225837.880927@guru.mired.org> Date: Tue, 19 Jun 2001 08:55:44 -0500 To: David Xu Cc: questions@freebsd.org Subject: Re: GCC 3.0 In-Reply-To: <89287996@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG David Xu types: > Hello, > > I heard GCC 3.0 was released yesterday. > will GCC 3.0 be in FreeBSD 4.4? Since it's already in -STABLE as /usr/ports/lang/gcc30, yes. On the other hand, it probably won't be used as the default system compiler, and if you have problems with a system compiled with it, you'll probably be asked to recompile with the default system compiler before reporting any bugs. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 6:58:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 1BD9237B401 for ; Tue, 19 Jun 2001 06:58:45 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 63916 invoked by uid 100); 19 Jun 2001 13:58:44 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.23188.636094.328983@guru.mired.org> Date: Tue, 19 Jun 2001 08:58:44 -0500 To: "LIQUID SOUL" Cc: questions@freebsd.org Subject: Re: USB modem support In-Reply-To: <80786515@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG LIQUID SOUL types: > I want to use a USB modem with my FreeBSD 4.2 i saw the it picking the > modem up at ugen0 but when i tried to use this in ppp.conf it crashed > and rebooted . Any ideas on why this happened and how to get the modem > working ? You may need to return it to the store and buy a different one, or get the interface specification out of the manufacturer and get a driver for it written. FreeBSD only supports USB modems that use the USB ACM interface. Modems that don't use that - which pretty much means they use a proprietary interface - aren't supported. If it is supported, it'll be reported as umodem, not ugen. Before giving up hope completely, try building a kernel with the USB modem support built statically. You'll need to have usb and one of uhci or ohci - whichever is recognized by your kernel, or both - as well as umodem. If you're running GENERIC, just add umodem. If you boot that kernel and it's not recognized as a umodem device, it won't work with the current driver. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7: 0:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from daemon.kingsqueak.org (cc737825-a.etntwn1.nj.home.com [65.8.90.95]) by hub.freebsd.org (Postfix) with ESMTP id F34BE37B403; Tue, 19 Jun 2001 07:00:23 -0700 (PDT) (envelope-from kingsqueak@kingsqueak.org) Received: from mrhat.kingsqueak.org (mrhat.kingsqueak.org [192.168.1.2]) by daemon.kingsqueak.org (Kingsqueak_SMTP_l337) with ESMTP id 28613B489; Tue, 19 Jun 2001 10:00:47 -0400 (EDT) Received: by mrhat.kingsqueak.org (Kingsqueak_SMTP_l337, from userid 1000) id 136CE19322; Tue, 19 Jun 2001 10:00:16 -0400 (EDT) Date: Tue, 19 Jun 2001 10:00:16 -0400 From: Chris To: Greg Lehey Cc: Bill Schoolcraft , FreeBSD Questions Subject: Re: digital camera Message-ID: <20010619100016.A23698@mrhat.kingsqueak.org> References: <20010518114030.J55915@wantadilla.lemis.com> <20010619115409.G58585@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010619115409.G58585@wantadilla.lemis.com>; from grog@FreeBSD.ORG on Tue, Jun 19, 2001 at 11:54:09AM +0930 X-Mailer: Mutt http://www.mutt.org/ X-Uptime: 2 days X-URL: http://www.kingsqueak.org/ X-Accept-Language: en X-Editor: Vim http://www.vim.org/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just a quick .02, the SanDisk SDDR-31 USB reader dongle works very nicely in both FreeBSD and linux. FreeBSD GENERIC picked it right up as a usb mass storage device. Just make sure you get the exact model, they'd changed the chipsets in the others they offer and last I saw were not cooperating too well with the specs. This is the best option with the cameras, don't know about you but an expensive camera tethered on yet another cable is just a pain, and the risk of wives and dangling cables is just too high ;-). Cats like the cables too it would seem. Writing this on my 'tripped over busted up Megahertz with dongle card". *Greg Lehey [010618 23:05]: > On Monday, 18 June 2001 at 8:28:49 -0700, Bill Schoolcraft wrote: > > At Fri, 18 May 2001 it looks like Greg Lehey composed: > > > > > > GL-->There are various things in the Ports Collection. I personally use a > > GL-->camera with Compact Flash memory (a Nikon CoolPix 880, which I quite > > GL-->like). I insert the CF card into a PCMCIA adaptor and mount it on my > > GL-->laptop as an MS-DOS file system. See > > GL-->http://echunga.lemis.com/~grog/diary-nov2000.html, 10 November 2000, > > GL-->for more details. > > GL--> > > GL-->Greg > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7: 3:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 3B5A137B40A for ; Tue, 19 Jun 2001 07:03:21 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 64124 invoked by uid 100); 19 Jun 2001 14:03:20 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.23464.598862.36853@guru.mired.org> Date: Tue, 19 Jun 2001 09:03:20 -0500 To: Parker Brown , questions@freebsd.org Subject: Re: BSD Internet Access Over CableTV In-Reply-To: <15151.21830.277392.837408@guru.mired.org> References: <39590841@toto.iv> <15151.21830.277392.837408@guru.mired.org> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mike Meyer types: > Parker Brown types: > > I've just retired my trusty 56K modem and opted for DSL-like speeds > > (256/64) and "always on" through Charter Communications, my local Cable > > TV company. Attachment is via UCB. > > > > My question is: before I go hacking through my configuration files, can > > someone tell me if support for that kind of Internet connection exists > > in BSD 4.3. Dmesg indicated that it located the Linksys UCB adaptor and > > labelled it ugen0. Will I need to get a special driver? > > I think you'll need to *write* a special driver for it. If it's > labelled as ugen0, it's not recognized as either a modem or ethernet > internface, and you're not going to be able to use it. > > The best solution is to go back to Charter Communications and beat on > them until you get a box that connects via ethernet instead of USB. One last thing that I forgot - try building a kernel with the umodem device as a static device. You'll need usb and either uhci or ohci, though both won't hurt, as well. That kernel may recognize it as a USB modem, in which case you can use it that way. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7: 4: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from daemon.kingsqueak.org (cc737825-a.etntwn1.nj.home.com [65.8.90.95]) by hub.freebsd.org (Postfix) with ESMTP id E910E37B406 for ; Tue, 19 Jun 2001 07:03:57 -0700 (PDT) (envelope-from kingsqueak@kingsqueak.org) Received: from mrhat.kingsqueak.org (mrhat.kingsqueak.org [192.168.1.2]) by daemon.kingsqueak.org (Kingsqueak_SMTP_l337) with ESMTP id 9E1D0B489; Tue, 19 Jun 2001 10:04:21 -0400 (EDT) Received: by mrhat.kingsqueak.org (Kingsqueak_SMTP_l337, from userid 1000) id D1FB11931E; Tue, 19 Jun 2001 10:03:56 -0400 (EDT) Date: Tue, 19 Jun 2001 10:03:56 -0400 From: Chris To: Ben Compton Cc: freebsd-questions@FreeBSD.ORG Subject: Re: KVM switches Message-ID: <20010619100356.B23698@mrhat.kingsqueak.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii:iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: ; from peabody007@deepspacenine.com on Mon, Jun 18, 2001 at 11:00:58PM -0400 X-Mailer: Mutt http://www.mutt.org/ X-Uptime: 2 days X-URL: http://www.kingsqueak.org/ X-Accept-Language: en X-Editor: Vim http://www.vim.org/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a Belkin OmniView SE 4pt. works great with FreeBSD and obsd boxes, I've had intermittent issues with the keyboard emulation, the only problems have occurred when I've rebooted a box while it wasn't selected. As long as it was selected just for the early boot, it's fine. I'll second the Cybex mention, very nice particularly when you start mixing PC's with Sun boxes...but they are only good if the job is buying ;-). * Ben Compton [010618 23:05]: > KVM switchesI've been using a Belkin OmniCube 4 port KVM for several months > not and have had wonderful success....I bounce between an Win2k Workstation > and FreeBSD box several times a day and have no problems with it. It > provides keyboard emulation so you can boot up a machine when it is not > selected. It also allows a keyboard shortcut (tapping the scroll-lock key > twice followed by a number) to switch ports. I have found it very useful. > It is not a high dollar item and would server your need quite well. > > If however you want to go VERY high dollar let me recommend Cybex....they > make some killer KVM...remote capabilities over both modem and twisted pair, > password protection of individual servers, as well as the ability to have > multiple consoles in different areas each with its own setup....very sweet > indeed =) > > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Sean Noonan > Sent: Monday, June 18, 2001 10:41 PM > To: Deakle, Jeff H.; freebsd-questions@FreeBSD.ORG > Cc: Lyons, Kevin C. > Subject: RE: KVM switches > > > I use cheapo 4-port Linksys units at home and have no problems with either > Windows or FreeBSD. > > > > I have had problems loosing keyboard and mouse control with several Belkin > models. > > > > At work I use units from Rose Electronics (www.roseelectronics.com). I > think they池e the best but very $$$$. > > > > -Sean Noonan > > > > > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Deakle, Jeff H. > Sent: Monday, June 18, 2001 3:03 PM > To: 'freebsd-questions@FreeBSD.ORG' > Cc: Lyons, Kevin C. > Subject: KVM switches > > > > Well after searching the questions here all I see is people having > problems with their KVM switches. 'Has anyone had any luck with any of the > switches on the market? If so could you let me know which one works with NT > & FBSD? > > Thanks! > > Jeff Deakle > Enercon Engineering, Inc. > (281)721-4680 > www.ener.com > -- __ ___ __ / //_(_)__ _http://www.kingsqueak.org _/ /__ / ,< / / _ \/ _ `(_-; Tue, 19 Jun 2001 07:22:56 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 65012 invoked by uid 100); 19 Jun 2001 14:22:55 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.24639.319811.254267@guru.mired.org> Date: Tue, 19 Jun 2001 09:22:55 -0500 To: Cc: questions@freebsd.org Subject: Re: X application without starting a desktop In-Reply-To: <128214007@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG midiostri@in.gr types: > Is it possible to run an XWindows application without starting KDE (or = > Gnome etc..) ? > (Something like launching the application together with the Xserver at = > its minimum..) No problem. Just put the command to start your application ~/.xinitrc, and then run startx. When your application exits, X will also exit. You may want to start a window manager as well, so that you can move the applications windows around. There are a lot of them that don't use KDE or Gnome. Personally, I use lwm, so I'd do: lwm & /usr/X11R6/bin/gimp for .xinitrc if I wanted to start and stop GIMP with "startx". You can probably set up aliases to do this without having to fidget with .xinitrc if you want. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7:37:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web9401.mail.yahoo.com (web9401.mail.yahoo.com [216.136.129.107]) by hub.freebsd.org (Postfix) with SMTP id 32E1D37B406 for ; Tue, 19 Jun 2001 07:37:22 -0700 (PDT) (envelope-from eric_boucher60@yahoo.com) Message-ID: <20010619143722.27671.qmail@web9401.mail.yahoo.com> Received: from [207.164.184.163] by web9401.mail.yahoo.com; Tue, 19 Jun 2001 07:37:22 PDT Date: Tue, 19 Jun 2001 07:37:22 -0700 (PDT) From: Eric Boucher Subject: TCL/TK: starting a process by root from a user To: FreeBSD MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi everybody, I want to know if something is possible to do with the TCL language: I want to start a process that only root have the permission to start. So I when the user start my little TCL script, it will ask the normal user for a password (not the root one of course) and if that password is valid, it will map that password to the one of the root and then start the process by root. So the TCL script will contain the root password, but I don't want that other user can see it, but can execute it. Is there a way with the TCL language to do such a thing? (Note: the process that I want to be started by a user is a daemon). Thanks a lot Eric __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7:54:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.communityconnect.com (mail.communityconnect.com [209.10.169.57]) by hub.freebsd.org (Postfix) with ESMTP id 9EF8037B401 for ; Tue, 19 Jun 2001 07:54:00 -0700 (PDT) (envelope-from marius@mail.communityconnect.com) Received: from amavis by mail.communityconnect.com with scanned-ok (Exim 3.20 #1) id 15CMtD-0008Vh-00 for questions@freebsd.org; Tue, 19 Jun 2001 10:53:59 -0400 Received: from [206.28.215.90] (helo=utterlux.hq.communitconnect.com) by mail.communityconnect.com with esmtp (Exim 3.20 #1) id 15CMt5-0008Ed-00; Tue, 19 Jun 2001 10:53:51 -0400 Date: Tue, 19 Jun 2001 10:53:54 -0400 (EDT) From: Marius X-Sender: marius@utterlux.hq.communitconnect.com To: jaime@snowmoon.com Cc: questions@FreeBSD.org, stable@FreeBSD.org Subject: Re: running out of buffer space for sockets Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG *smile* Given my sometimes hideous abuse of the English language, it does not surprise me that someone would think I made a typo. Actually, I meant what I said. I am using thttpd not httpd. It is a single instance, spawning no children. You have a point though, I will indeed scan the docs to see if there is anything on thttpd's side that can be done to quell the tide. The pecular part about this is that my 3.5-Stable servers don't have such problems. With the same augents to the kernel (maxusers at 128 and NMBCLUSTERS at 16384) my 4.2-Stable box had significantly fewer kernel resources then my 3.5-Stable boxen. It would freeze up and die (couldn't open more filehandles) after about a day of serving. I manually uped kern.maxfiles, kern.maxfilesperproc, kern.maxvnodes with sysctl to give it values equal to the cluster of 3.5-Stable boxen that could serve for weeks without any such problems. (I think it helped) But now after +2 weeks up uptime I am running buffer space to create more sockets. If I can't create sockets, I can't network. Yes, the root of this problem is that I don't even know how to check how much buffer space is available for the creation of new sockets. Whether it is a kernal tweak/config or something far more basic, I am striving to understand the problem so I can resolve it. This is a bit out of my normal area of experience, and I am trying to learn all that I can. Any guidence from idividuals or list members would be appreciated. -Marius B.T.W. Please cc: me in all replies. > One of my webservers is having an on-again, off-again problem with > networking. When the load gets up there (thttpd is pushing maybe 15MB > right now) I begin to run out of buffer space to create sockets. Heya old pal. :) Honestly, I think that looking at the kernel in this case is like rebuilding the foundation of a house when all that's needed is an extra layer of paint in the basement. You know, massive over kill. Look into your apache config files for something that will help. I found the following in mine: # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. For these platforms, set to something like 10000 # or so; a setting of 0 means unlimited. # # NOTE: This value does not include keepalive requests after the initial # request per connection. For example, if a child process handles # an initial request and 10 subsequent "keptalive" requests, it # would only count as 1 request towards this limit. # MaxRequestsPerChild 0 You should just tell apache to "recycle" child processes after they answer a certain number of requests. This will keep them from getting too big. Good luck, Jaime ---------- Forwarded message ---------- Date: Mon, 18 Jun 2001 18:06:30 -0400 (EDT) From: Marius To: questions@FreeBSD.org Subject: running out of buffer space for sockets One of my webservers is having an on-again, off-again problem with networking. When the load gets up there (thttpd is pushing maybe 15MB right now) I begin to run out of buffer space to create sockets. >Jun 18 16:44:01 cc124 sendmail[39781]: f5IKi1439781: SYSERR(root): makeconnection: cannot create socket: No buffer space available >Jun 18 16:44:01 cc124 sendmail[39781]: f5IKi1439781: SYSERR(root): makeconnection: cannot create socket: No buffer space available I get similar or related messages when I try to ping someone, use tcpdump, do an nslookup etc. Running one of these the commands in quick succession produces some successes, some failures, right after one another. I have networking fairly beefed up: ># sysclt -a |grep max >kern.maxvnodes: 129508 >kern.maxproc: 2068 >kern.maxfiles: 65536 >...snip... >kern.maxfilesperproc: 65500 >kern.maxprocperuid: 2067 >kern.ipc.maxsockbuf: 262144 >kern.ipc.somaxconn: 256 >...snip... >kern.ipc.maxsockets: 16384 >...snip... >vfs.maxbufspace: 117932032 >vfs.maxmallocbufspace: 5863833 ># netstat -m >7115/8624/65536 mbufs in use (current/peak/max): > 5454 mbufs allocated to data > 1661 mbufs allocated to packet headers >5056/5854/16384 mbuf clusters in use (current/peak/max) >13864 Kbytes allocated to network (28% of mb_map in use) >0 requests for memory denied >0 requests for memory delayed >0 calls to protocol drain routines Basically I am trying to figure out if I can tweak something to make this scarce resource less scarce. I could try changing some of the MIB's but I am not totally sure whcih ones would effect this. I am researching this the best I can, but I feel a bit overwhelmed. I'd hate to tweak something up beyond sane levels unknowingly. Pointers or suggestions would be appreciated. system info: 4.2-STABLE FreeBSD Dual 700Mhz Processors 1 GB RAM 2 eepro100 NIC cards (100baseTX ) -Marius To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 7:57:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from westhost43.westhost.com (westhost43.westhost.com [216.71.84.167]) by hub.freebsd.org (Postfix) with ESMTP id 3E90737B401 for ; Tue, 19 Jun 2001 07:57:38 -0700 (PDT) (envelope-from burningclown@westhost43.westhost.com) Received: from localhost (burningclown@localhost) by westhost43.westhost.com (8.9.3/8.9.3) with ESMTP id KAA22446 for ; Tue, 19 Jun 2001 10:08:59 -0500 Date: Tue, 19 Jun 2001 10:08:59 -0500 (CDT) From: To: freebsd-questions Subject: ksh93 vs. pdksh Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG All, Hope this isn't hopelessly newbie. I have FreeBSD up & running and it's beautiful, but I'm trying to acclimate myself to the 'ports' way of installing/updating (I've been using Debian GNU/Linux, and apt-get has spoilt me!) Anyway, last night I installed ksh93, having heard on slashdot 'bout the great capabilities of the 'real' Korn shell as opposed to the somewhat-hobbled pdksh. So now I have -both- pdksh and ksh93 on my system. The thing is, I can't figure out what starts when I type the command 'ksh.' It -used- to be pdksh, of course. Maybe it still is. All I know is that when I type 'man ksh' I get the man page for pdksh; when I type 'man ksh93' I get the man page for ksh93; when I type 'ksh93' I get 'command not found' and when I type 'ksh' ... something starts up. I guess I should just remove pdksh, yes? How do I determine what's what here? Thanks, Glenn Becker +----------------+ http://www.burningclown.com "Everyone's Portal to Nothing At All" +----------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8: 0:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id ABBAF37B407 for ; Tue, 19 Jun 2001 08:00:23 -0700 (PDT) (envelope-from fgleiser@cactus.fi.uba.ar) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.3/8.9.3) with ESMTP id f5JF0T872848; Tue, 19 Jun 2001 12:00:29 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 19 Jun 2001 12:00:29 -0300 (ART) From: Fernando Gleiser To: Alex Charalabidis Cc: Subject: Re: Problems with SB16 ISA in 4.3 In-Reply-To: <20010618184733.G48002-100000@earth.wnm.net> Message-ID: <20010619115844.F71890-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Alex Charalabidis wrote: > > Drop the sbc0 device from the conf. The pcm device alone should let it > detect the SB16. I already tried it, but if I drop the sbc0 device from the conf file, the kernel doesn't even detect the card. > > hth > > -ac > > -- > =================================================================== > Alex Charalabidis Worldspice Technologies > 5050 Poplar Ave. Memphis, TN, USA +1 901 432 6000 > Opinions expressed are mine alone but may be yours for a small fee. > =================================================================== > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8: 2:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cisco.com (sword.cisco.com [161.44.208.100]) by hub.freebsd.org (Postfix) with ESMTP id B2BED37B403 for ; Tue, 19 Jun 2001 08:02:50 -0700 (PDT) (envelope-from sjt@cisco.com) Received: from sjt-u10.cisco.com (sjt-u10.cisco.com [10.85.30.63]) by cisco.com (8.8.5-Cisco.1/8.8.8) with ESMTP id LAA16766; Tue, 19 Jun 2001 11:02:49 -0400 (EDT) Received: (sjt@localhost) by sjt-u10.cisco.com (8.8.5-Cisco.1/CISCO.WS.1.2) id LAA02377; Tue, 19 Jun 2001 11:02:49 -0400 (EDT) Date: Tue, 19 Jun 2001 11:02:49 -0400 From: Steve Tremblett To: burningclown@westhost43.westhost.com Cc: freebsd-questions Subject: Re: ksh93 vs. pdksh Message-ID: <20010619110248.A2368@sjt-u10.cisco.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from burningclown@westhost43.westhost.com on Tue, Jun 19, 2001 at 10:08:59AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG sjt-bsd /home/sjt $ echo $KSH_VERSION @(#)PD KSH v5.2.14 99/07/13.2 -- Steve Tremblett To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:10:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id BAD6F37B406 for ; Tue, 19 Jun 2001 08:10:43 -0700 (PDT) (envelope-from fgleiser@cactus.fi.uba.ar) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.3/8.9.3) with ESMTP id f5JFAR873017; Tue, 19 Jun 2001 12:10:27 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 19 Jun 2001 12:10:26 -0300 (ART) From: Fernando Gleiser To: Cc: freebsd-questions Subject: Re: ksh93 vs. pdksh In-Reply-To: Message-ID: <20010619120753.N71890-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 19 Jun 2001 burningclown@westhost43.westhost.com wrote: > > I guess I should just remove pdksh, yes? How do I determine what's what > here? If you are in vi editing mode, type [ESC] ^V that's escape and then control-v It should tell you the version. pdksh says: "PD KSH v5.2.14 99/07/13.2" > > Thanks, > > Glenn Becker > > +----------------+ > http://www.burningclown.com > "Everyone's Portal to Nothing At All" > +----------------+ > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:13:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from zelda.cl.msu.edu (zelda.cl.msu.edu [35.8.3.42]) by hub.freebsd.org (Postfix) with ESMTP id 818C637B406 for ; Tue, 19 Jun 2001 08:13:35 -0700 (PDT) (envelope-from glowack2@zelda.cl.msu.edu) Received: (from glowack2@localhost) by zelda.cl.msu.edu (8.9.3/8.9.3) id LAA65939 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 11:13:34 -0400 (EDT) (envelope-from glowack2) Date: Tue, 19 Jun 2001 11:13:34 -0400 From: Edward Glowacki To: freebsd-questions@freebsd.org Subject: SSH and PAM still broken? Message-ID: <20010619111333.D65613@msu.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I recently installed FreeBSD 4.3-20010610-STABLE on a new box. SSH works OK unless I try using authorized_keys2 to allow SSH in without a password, in which case I get the error "fatal: PAM setcred failed[6] Permission denied". I've searched the FreeBSD mailing list archives, and it seems like this problem has been around a while. The best information on how to fix it I've found was to update /etc/pam.conf, except the version I have already has the prescribed fixes. Is there something I missed here, or is PAM&SSH just broken? -- Edward Glowacki glowack2@msu.edu Computer Laboratory, Technical Support Services Michigan State University To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:17:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-26-235-186.mmcable.com [65.26.235.186]) by hub.freebsd.org (Postfix) with SMTP id 0509C37B407 for ; Tue, 19 Jun 2001 08:17:43 -0700 (PDT) (envelope-from mwm@mired.org) Received: (qmail 66490 invoked by uid 100); 19 Jun 2001 15:17:42 -0000 From: Mike Meyer MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.27926.269821.788368@guru.mired.org> Date: Tue, 19 Jun 2001 10:17:42 -0500 To: Eric Boucher Cc: questions@freebsd.org Subject: Re: TCL/TK: starting a process by root from a user In-Reply-To: <48884089@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Eric Boucher types: > Hi everybody, > > I want to know if something is possible to do with the > TCL language: I want to start a process that only root > have the permission to start. So I when the user start > my little TCL script, it will ask the normal user for > a password (not the root one of course) and if that > password is valid, it will map that password to the > one of the root and then start the process by root. So > the TCL script will contain the root password, but I > don't want that other user can see it, but can execute > it. Is there a way with the TCL language to do such a > thing? (Note: the process that I want to be started by > a user is a daemon). I'm pretty sure the answer is no, but the problem isn't tcl, it's the FreeBSD suid system. You're going about this all wrong for Unix. If you make the script mode 700 and executable by root, the sudo port should do pretty much what you want as is. You might take a look at that. If you really want to do it by hand, you'll need a C program that starts the tcl script - because FBSD ignored the suid bit on interpreted commands - and then have the script use getpwuid to get the encrypted password, get what the user thinks the password is, and test them. I can provide python showing how to do this, but I have no idea how you'd do it with tcl. It might be easiest to have the C program do the password checking, but then it's doing pretty much what sudo does. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:32:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.scana.com (falcon.scana.com [161.156.101.7]) by hub.freebsd.org (Postfix) with ESMTP id 3E8AF37B401 for ; Tue, 19 Jun 2001 08:32:16 -0700 (PDT) (envelope-from MSILVER@scana.com) Received: by falcon.scana.com; id LAA15948; Tue, 19 Jun 2001 11:32:14 -0400 (EDT) Received: from maildmis.scana.com(161.156.252.90) by falcon.scana.com via smap (V5.5) id xma015782; Tue, 19 Jun 01 11:31:39 -0400 Received: by maildmis.scana.com with Internet Mail Service (5.5.2653.19) id ; Tue, 19 Jun 2001 11:31:38 -0400 Message-ID: From: "SILVER, MICHAEL A" To: "'Terry Allen'" , "'freebsd-questions@FreeBSD.ORG'" Subject: RE: BSD Problem 2 Date: Tue, 19 Jun 2001 11:31:37 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG One consideration, if you are only going to use it as a server, you don't need X. There is a port for Webmin. Goto /usr/ports/sysutils/webmin-0.86_2. Then enter: make && make install && make clean This will download the webmin sources, build it, install it and clean up temporary files. If you haven't explored the ports yet, you are in for a very big, very pleasant surprise. ...Michael... -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Terry Allen Sent: Tuesday, June 19, 2001 6:49 AM To: freebsd-questions@FreeBSD.ORG Subject: BSD Problem 2 I want the BSD machine to run as a server (http, ftp, email etc...) & I want to admin it with Webmin - does Webmin come on the install disk for 4.3? Once again, many thanks for the assistance. I'll subscribe to the mailing list properly in the next couple of days. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:42:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wasp.eng.ufl.edu (wasp.eng.ufl.edu [128.227.116.1]) by hub.freebsd.org (Postfix) with ESMTP id CED8637B407 for ; Tue, 19 Jun 2001 08:41:56 -0700 (PDT) (envelope-from bob@eng.ufl.edu) Received: from eng.ufl.edu (scanner.engnet.ufl.edu [128.227.152.221]) by wasp.eng.ufl.edu (8.9.3/8.9.3) with ESMTP id LAA15860; Tue, 19 Jun 2001 11:41:54 -0400 (EDT) Message-ID: <3B2F72C1.DC177BAD@eng.ufl.edu> Date: Tue, 19 Jun 2001 11:41:53 -0400 From: Bob Johnson X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en, eo MIME-Version: 1.0 To: wayne.pascoe@realtime.co.uk Cc: questions@freebsd.org Subject: Re: Wireless setup Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > Date: 19 Jun 2001 09:00:16 +0100 > From: Wayne Pascoe > Subject: [Wayne Pascoe ] Wireless setup > > My apologies if this has already appeared. I posted it last night, and > have still not seen it on the list... > > Hi there, > > I am looking at going wireless at home. My server / internet gateway > lives downstairs, below the computer room upstairs. The walking > distance is about 15 meters. The direct distance between the machines > is about 8 meters, but with a floor between them. > > At the end of the day I need to have 3 laptops and 2 pc's on the > network. The one pc is my internet gateway and home file server. The > other PC is my main machine and my games machine. The laptops are my > wife's and her parents. > > The PCI cards that I am looking at at are D-Link DWL-500's and the > PCMCIA cards are D-Link DWL-650's. Are these cards supported under > 4.3-STABLE ? The DWL-500 looks like a pcmcia card plugged into some > kind of PCI bridge... Also, do they have the range for this kind of > setup ? The DWL-650 partially works in 4.3-RELEASE (or RELENG_4_3, which is 4.3-RELEASE with security patches), but it did not work when I tested it in 4.3-STABLE a week or two ago. The problem was probably introduced in late April, judging from the change log for the driver. I say "partially" because I haven't been able to get encryption working. It works fine without encryption. I'm using the "wi" driver, which is already set up for that card in the pccard.conf file in 4.3. In my office, through concrete walls and a few wooden doors, the range is only about 15 meters. I haven't yet tested the maximum range at home where I use it most of the time, but through normal interior walls it ought to cover most houses. If I recall correctly, D-Link says it will have 10 - 300 meters range, depending on environment. One review I saw said that the card performs very well until it gets near the limit of its range, then drops off rapidly, i.e. you will generally have either 11 mbps connections, or nothing; it only falls back to lower data rates shortly before it loses the connection completely. So far that seems to be what happens to me, although I haven't looked at it in detail. > > Lastly, what base station can people advise ? I need the cheapest one > possible that will do the job and keep up with my needs for about 9 > months. I bought D-Links home router-firewall-printer server-10/100 switch- wireless access point. I forget the model number (513 maybe?). It is pretty neat. It's about $50 more than the basic AP in the U.S. > > Any advice on these matters would be much appreciated. I don't really > want to spend money on the wrong solution :) > I'm rather limited by the lack of encryption. I wouldn't advise anyone to run a wireless AP without encryption, so it might be wise to look for a solution that is 100% functional, although that seems to limit you to the higher-priced cards. The -mobile mailing list archives indicate that there is some interest in making the D-Link DWL-650 and the Linksys WPC11 (I think that's the number) fully functional because they are getting so cheap and common. I don't know how much progress is being made on this. I hope it happens soon, or I will break down and buy a card that supports encryption. Also, it might be a good idea to stick with devices that are WI-FI certified, so you can be fairly confident that they will interoperate if you get mixed brands. See http://www.wi-fi.com/ > Thanks, Good luck, - Bob > > - -- > - - Wayne Pascoe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:50:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from btconnex.net (mailtest.btconnex.net [209.47.192.8]) by hub.freebsd.org (Postfix) with SMTP id 2630037B416 for ; Tue, 19 Jun 2001 08:50:10 -0700 (PDT) (envelope-from dan@beanfield.com) Received: (qmail 84031 invoked from network); 19 Jun 2001 15:46:49 -0000 Received: from unknown (HELO beanfield.com) (192.168.66.18) by mailtest.btconnex.net with SMTP; 19 Jun 2001 15:46:49 -0000 Message-ID: <3B2F74D7.C057B32F@beanfield.com> Date: Tue, 19 Jun 2001 11:50:47 -0400 From: Dan Armstrong X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4m) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Urgent help with Reverse Lookups and FTPD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG We are a small ISP, and just turned up a new webserver running Free4.3 Most of our customers live on private (192.168) addresses and I am getting slaughtered with phone calls that they cannot ftp into their sites, and it is because their ftp programs don't necessarily wait for Free's ftpd to timeout doing the reverse lookup, for an address that of course does not have any reverse information for it. If I add their IP to the /etc/hosts BOOM they get in instantly. These thousands of addresses are all dynamically assigned, so the hosts file fix is not possible on this scale. Is there a way I can get it to stop? HELP! Dan. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:50:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 952FC37B403 for ; Tue, 19 Jun 2001 08:50:20 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5JFoML56336; Tue, 19 Jun 2001 11:50:22 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 11:50:22 -0400 (EDT) From: Joe Clarke To: richard harris Cc: , Subject: Re: single user In-Reply-To: <20010619084603.45955.qmail@web11904.mail.yahoo.com> Message-ID: <20010619114959.Y52646-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You'll need to boot off a fixit floppy, and redo your master.passwd file from there. Joe clarke On Tue, 19 Jun 2001, richard harris wrote: > Hi... > I prevent booting FreeBSD into the single user mode > with this path > in /etc/ttys:# > # This entry needed for asking password when init goes > to single-usermode > # If you want to be asked for password, change > "secure" to "insecure"here > console none unknown off secure > > but right now i forgot my root password, so what can i > do??? > > > > __________________________________________________ > Do You Yahoo!? > Spot the hottest trends in music, movies, and more. > http://buzz.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:51: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 6E63F37B407 for ; Tue, 19 Jun 2001 08:51:01 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5JFoxK56343; Tue, 19 Jun 2001 11:50:59 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 11:50:59 -0400 (EDT) From: Joe Clarke To: Martin Schreiber Cc: Subject: Re: build failed In-Reply-To: <000901c0f899$b19d88b0$d5fea8c0@avant> Message-ID: <20010619115027.Q52646-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can you please include the errors you get when compiling? Joe Clarke On Tue, 19 Jun 2001, Martin Schreiber wrote: > > Dear FreeBSD Team, > > i have tried to build a new kernel because i want to use my freebsd maschine as a gateway. > I have 2 NICs installed ( 3com and SCM ) and the config is running fine, also the make depend, > but the make failed. > > Can you help me please ? > > thanks > martin > > > the kernel file is attached > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 8:52:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 4830D37B401 for ; Tue, 19 Jun 2001 08:52:28 -0700 (PDT) (envelope-from akbeech@anchoragerescue.org) Received: from galaxy.anchoragerescue.org (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 1E5C2183; Tue, 19 Jun 2001 07:52:27 -0800 (AKDT) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: Gregory W Lovell , freebsd-questions@freebsd.org Subject: Re: Failed "make" on quite normal kernel Date: Tue, 19 Jun 2001 07:52:26 -0800 X-Mailer: KMail [version 1.2] References: In-Reply-To: MIME-Version: 1.0 Message-Id: <01061907522600.64018@galaxy.anchoragerescue.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 18 June 2001 23:34, Gregory W Lovell wrote: > FreeBSD Questions, > > I've tried to recompile the kernel to add NATD support to my system 3 > times now, and it has failed every time. The only change I have made to > the config file when compared to GENERIC are adding the lines: > > options IPFIREWALL > options IPDIVERT > > These are added at the end of all the other "options" lines. > > The last few lines shown after the make command crashes are: > > si -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include > opt_global.h -e > lf -mpreferred-stack-boundary=2 ../../dev/nsp/nsp.c > cc: Internal compiler error: program cc1 got fatal signal 11 > *** Error code 1 > > Stop in /usr/src/sys/compile/NATD > bash-2.05#cpp:output pipe has been closed > Jun 19 07:06:52 /kernel:pid 6420(cc1), uid 0: exited on signal 11 (core > dumped) > > As you can imagine, this is quite frustrating, as NATD is to be one of the > primary functions of the box. It is a Pentium 133 on a SuperMicro board > without FDD, Serial or Parallel Controllers. Everything else seems to > work fine except this. One thing that may be worth noting is that I > actually have installed FreeBSD by plugging the HDD into another computer, > as I cannot boot from CD-ROM or FDD. I was told this would be OK, but you > never know... > > Any help would be greatly appreciated. The rest of my experience with > FreeBSD has been very positive. > > Greg Lovell Sig 11 is a sign of hardware failure, usually memory. Check the maillist as his issue comes up regularly. Beech ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:18:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11702.mail.yahoo.com (web11702.mail.yahoo.com [216.136.172.68]) by hub.freebsd.org (Postfix) with SMTP id 9F3B637B407 for ; Tue, 19 Jun 2001 09:18:47 -0700 (PDT) (envelope-from tperlin@yahoo.com) Message-ID: <20010619161847.80261.qmail@web11702.mail.yahoo.com> Received: from [63.200.148.220] by web11702.mail.yahoo.com; Tue, 19 Jun 2001 09:18:47 PDT Date: Tue, 19 Jun 2001 09:18:47 -0700 (PDT) From: Tim Erlin Subject: newsyslog.conf -- modes To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The man page for newsyslog clearly states: "mode Specify the mode of the log file and archives" Where can I find out what the possible modes are? Thanks. --Tim __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:23:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pickup2-ld.pvd.loa.net (pickup.loa.com [199.171.167.59]) by hub.freebsd.org (Postfix) with SMTP id A278B37B403 for ; Tue, 19 Jun 2001 09:23:29 -0700 (PDT) (envelope-from brentb@loa.com) Received: (qmail 18000 invoked by uid 0); 19 Jun 2001 16:16:05 -0000 Received: from unknown (HELO pretorian) ([208.130.43.221]) (envelope-sender ) by pickup2-ld.pvd.loa.net (qmail-ldap-1.03) with SMTP for <>; 19 Jun 2001 16:16:05 -0000 Message-ID: <005d01c0f8db$0ef46d80$3ab4a8c0@pretorian> From: "Brent Bailey" To: Subject: tripwire how to ?? Date: Tue, 19 Jun 2001 12:15:29 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Im currently trying to beef up the security on my FBSD box by installing "tripwire-131"..i was wondering if anyine could point me at a GOOD tripwire HOWTO website. thanx Brent To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:24:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 408F737B407 for ; Tue, 19 Jun 2001 09:24:08 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5JGOBO56402; Tue, 19 Jun 2001 12:24:11 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 12:24:11 -0400 (EDT) From: Joe Clarke To: Tim Erlin Cc: Subject: Re: newsyslog.conf -- modes In-Reply-To: <20010619161847.80261.qmail@web11702.mail.yahoo.com> Message-ID: <20010619122354.S52646-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Same as chmod(1). man chmod. Joe Clarke On Tue, 19 Jun 2001, Tim Erlin wrote: > The man page for newsyslog clearly states: > > "mode Specify the mode of the log file and > archives" > > Where can I find out what the possible modes are? > > Thanks. > > --Tim > > > > > __________________________________________________ > Do You Yahoo!? > Spot the hottest trends in music, movies, and more. > http://buzz.yahoo.com/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:38: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts6-srv.bellnexxia.net (tomts6.bellnexxia.net [209.226.175.26]) by hub.freebsd.org (Postfix) with ESMTP id 0F7E037B406 for ; Tue, 19 Jun 2001 09:37:59 -0700 (PDT) (envelope-from matt@xena.gsicomp.on.ca) Received: from xena.gsicomp.on.ca ([64.228.154.141]) by tomts6-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010619163758.JCUC29618.tomts6-srv.bellnexxia.net@xena.gsicomp.on.ca>; Tue, 19 Jun 2001 12:37:58 -0400 Received: from localhost (matt@localhost) by xena.gsicomp.on.ca (8.11.1/8.11.1) with ESMTP id f5JGZKq77150; Tue, 19 Jun 2001 12:35:20 -0400 (EDT) (envelope-from matt@xena.gsicomp.on.ca) Date: Tue, 19 Jun 2001 12:35:20 -0400 (EDT) From: Matthew Emmerton To: Douglas Carmichael Cc: freebsd-questions@FreeBSD.ORG, webmaster@cdrom.com Subject: Re: When will FreeBSD subscription CDs start shipping again? In-Reply-To: <009FDC19.68719645.6@mail.ourservers.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I got my 4.3-REL set last week. Apparently during the last batch of takeovers (BSDi buying Walnut Creek and Wind River buying BSDi), the orders department is now one very patient (and overworked person.) -- Matthew Emmerton || matt@gsicomp.on.ca GSI Computer Services || http://www.gsicomp.on.ca On Tue, 19 Jun 2001, Douglas Carmichael wrote: > When will FreeBSD subscription CDs start shipping again? (I have been a > subscriber since 2.2.2-RELEASE and still have not received my 4.3 CDs.) > > Also, is FreeBSD 5.0 on track for an end-of-summer release date? > > A prompt response will be appreciated. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:39:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tao.thought.org (sense-kline-248.oz.net [216.39.168.248]) by hub.freebsd.org (Postfix) with ESMTP id 405D537B407 for ; Tue, 19 Jun 2001 09:39:14 -0700 (PDT) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.11.3/8.11.0) id f5JGbvD50909; Tue, 19 Jun 2001 09:37:57 -0700 (PDT) (envelope-from kline) Date: Tue, 19 Jun 2001 09:37:56 -0700 From: Gary Kline To: Tim Erlin Cc: questions@FreeBSD.ORG Subject: Re: newsyslog.conf -- modes Message-ID: <20010619093756.B50827@tao.thought.org> References: <20010619161847.80261.qmail@web11702.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20010619161847.80261.qmail@web11702.mail.yahoo.com>; from tperlin@yahoo.com on Tue, Jun 19, 2001 at 09:18:47AM -0700 X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: Observing 15 years of service to the Unix community Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 09:18:47AM -0700, Tim Erlin wrote: > The man page for newsyslog clearly states: > > "mode Specify the mode of the log file and > archives" > > Where can I find out what the possible modes are? > The modes (for what are primarily text files) are things like 0600, 0640, 0644, or whatever you choose. If your printer handles postscript, it might help if you would do % man -t newsyslog | lpr and take the printout, go in some corner, and read the man page. -- Gary D. Kline kline@thought.org www.thought.org Public service Unix To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:48:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from camel.kdsi.net (camel.kdsi.net [206.103.113.218]) by hub.freebsd.org (Postfix) with ESMTP id 4312337B401 for ; Tue, 19 Jun 2001 09:48:30 -0700 (PDT) (envelope-from tony@camel.kdsi.net) Received: from camel.kdsi.net (leepcD-030.sub-d.lee.net [208.205.127.30]) (authenticated (0 bits)) by camel.kdsi.net (8.12.0.Beta10/8.12.0.Beta10) with ESMTP id f5JGoxKv069943; Tue, 19 Jun 2001 11:51:05 -0500 (CDT) Message-ID: <3B2F820B.4147E4E8@camel.kdsi.net> Date: Tue, 19 Jun 2001 11:47:07 -0500 From: Tony Wells X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Dan Armstrong Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Urgent help with Reverse Lookups and FTPD References: <3B2F74D7.C057B32F@beanfield.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Do you really need thousands of addresses for your customers? I'm making an assumption , but if you're assigning addresses using DHCP, can you limit the range of addresses assigned to a reasonable amount? If you only have say, 100 modems/xdsl/isdn or whatever connections, you don't need ~64,000 IP's available. I would try looking into limiting the addresses assigned, and then using /etc/hosts or reverse dns to resolve the IP's. (Unless of course, you really need all those IP's.) Dan Armstrong wrote: > > We are a small ISP, and just turned up a new webserver running Free4.3 > > Most of our customers live on private (192.168) addresses and I am > getting slaughtered with phone calls that they cannot ftp into their > sites, and it is because their ftp programs don't necessarily wait for > Free's ftpd to timeout doing the reverse lookup, for an address that of > course does not have any reverse information for it. If I add their > IP to the /etc/hosts BOOM they get in instantly. These thousands of > addresses are all dynamically assigned, so the hosts file fix is not > possible on this scale. Is there a way I can get it to stop? HELP! > > Dan. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 9:58: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from btconnex.net (mailtest.btconnex.net [209.47.192.8]) by hub.freebsd.org (Postfix) with SMTP id 5F8D737B401 for ; Tue, 19 Jun 2001 09:58:06 -0700 (PDT) (envelope-from dan@beanfield.com) Received: (qmail 91791 invoked from network); 19 Jun 2001 16:54:55 -0000 Received: from unknown (HELO beanfield.com) (192.168.66.18) by mailtest.btconnex.net with SMTP; 19 Jun 2001 16:54:55 -0000 Message-ID: <3B2F84CE.608E7F75@beanfield.com> Date: Tue, 19 Jun 2001 12:58:54 -0400 From: Dan Armstrong X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4m) X-Accept-Language: en MIME-Version: 1.0 To: Tony Wells Cc: freebsd-questions@freebsd.org Subject: Re: Urgent help with Reverse Lookups and FTPD References: <3B2F74D7.C057B32F@beanfield.com> <3B2F820B.4147E4E8@camel.kdsi.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, we have almost 1000 stub-bridged Ethernet LANs each on it's own private subnet tunneled over an ATM network back to a router. The long and the short of it is that we just cannot possibly manage reverse info for the entire network. Dan. Tony Wells wrote: > Do you really need thousands of addresses for your customers? I'm > making an assumption , but if you're assigning addresses using DHCP, can > you limit the range of addresses assigned to a reasonable amount? If > you only have say, 100 modems/xdsl/isdn or whatever connections, you > don't need ~64,000 IP's available. > > I would try looking into limiting the addresses assigned, and then using > /etc/hosts or reverse dns to resolve the IP's. (Unless of course, you > really need all those IP's.) > > Dan Armstrong wrote: > > > > We are a small ISP, and just turned up a new webserver running Free4.3 > > > > Most of our customers live on private (192.168) addresses and I am > > getting slaughtered with phone calls that they cannot ftp into their > > sites, and it is because their ftp programs don't necessarily wait for > > Free's ftpd to timeout doing the reverse lookup, for an address that of > > course does not have any reverse information for it. If I add their > > IP to the /etc/hosts BOOM they get in instantly. These thousands of > > addresses are all dynamically assigned, so the hosts file fix is not > > possible on this scale. Is there a way I can get it to stop? HELP! > > > > Dan. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10: 4:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from evilfry.dyndns.org (dyn15ppp9.qala.com.sg [210.193.15.9]) by hub.freebsd.org (Postfix) with ESMTP id 72EAD37B401 for ; Tue, 19 Jun 2001 10:04:38 -0700 (PDT) (envelope-from root@evilfry.dyndns.org) Received: by evilfry.dyndns.org (Postfix, from userid 0) id 66C9718381D; Wed, 20 Jun 2001 01:04:50 +0800 (SGT) Content-Type: text/plain; charset="iso-8859-1" From: James Lim Reply-To: evilfry@sg.freebsd.org To: Dan Armstrong , Tony Wells Subject: Re: Urgent help with Reverse Lookups and FTPD Date: Wed, 20 Jun 2001 01:04:46 +0800 X-Mailer: KMail [version 1.2] Cc: freebsd-questions@freebsd.org References: <3B2F74D7.C057B32F@beanfield.com> <3B2F820B.4147E4E8@camel.kdsi.net> <3B2F84CE.608E7F75@beanfield.com> In-Reply-To: <3B2F84CE.608E7F75@beanfield.com> MIME-Version: 1.0 Message-Id: <01062001044603.44515@evilfry.dyndns.org> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi =09Are you using the normal ftpd? Does commenting out the following in=20 your /etc/host.allow works? # Prevent those with no reverse DNS from connecting. #ALL : PARANOID : RFC931 20 : deny Hope this helps. On the last episode Wednesday 20 June 2001 00:58, Dan Armstrong wrote: > Well, we have almost 1000 stub-bridged Ethernet LANs each on it's > own private subnet tunneled over an ATM network back to a router.=20 > The long and the short of it is that we just cannot possibly manage > reverse info for the entire network. > > Dan. > > Tony Wells wrote: > > Do you really need thousands of addresses for your customers?=20 > > I'm making an assumption , but if you're assigning addresses > > using DHCP, can you limit the range of addresses assigned to a > > reasonable amount? If you only have say, 100 modems/xdsl/isdn or > > whatever connections, you don't need ~64,000 IP's available. > > > > I would try looking into limiting the addresses assigned, and > > then using /etc/hosts or reverse dns to resolve the IP's.=20 > > (Unless of course, you really need all those IP's.) > > > > Dan Armstrong wrote: > > > We are a small ISP, and just turned up a new webserver running > > > Free4.3 > > > > > > Most of our customers live on private (192.168) addresses and I > > > am getting slaughtered with phone calls that they cannot ftp > > > into their sites, and it is because their ftp programs don't > > > necessarily wait for Free's ftpd to timeout doing the reverse > > > lookup, for an address that of course does not have any reverse > > > information for it. If I add their IP to the /etc/hosts BOOM > > > they get in instantly. These thousands of addresses are all > > > dynamically assigned, so the hosts file fix is not possible on > > > this scale. Is there a way I can get it to stop? HELP! > > > > > > Dan. > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message - --=20 Regards, James Lim http://sg.freebsd.org | http://www.bsd-geeks.org -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8 iQA/AwUBOy+GLppTakonTMbIEQLRawCghDlBMaOCON42Ph+eDyw603V9xJwAoPOa Zk8EEVolF8KC84QoLxU44Cw8 =3D2/HN -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10: 7:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ruby.he.net (ruby.he.net [216.218.187.2]) by hub.freebsd.org (Postfix) with ESMTP id B405237B410; Tue, 19 Jun 2001 10:07:21 -0700 (PDT) (envelope-from bill@wiliweld.com) Received: from corten8.billschoolcraft.com (adsl-63-193-247-201.dsl.snfc21.pacbell.net [63.193.247.201]) by ruby.he.net (8.8.6/8.8.2) with ESMTP id KAA15097; Tue, 19 Jun 2001 10:07:25 -0700 Date: Tue, 19 Jun 2001 10:07:11 -0700 (PDT) From: Bill Schoolcraft X-Sender: bill@corten8.billschoolcraft.com To: Greg Lehey Cc: FreeBSD Questions Subject: Re: digital camera [CompactFlash Card, it works!!] In-Reply-To: <20010619115409.G58585@wantadilla.lemis.com> Message-ID: System-ID: [en] (I; Linux 2.2.17-21mdk i86pc) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At Tue, 19 Jun 2001 it looks like Greg Lehey composed: GL-->On Monday, 18 June 2001 at 8:28:49 -0700, Bill Schoolcraft wrote: GL-->> At Fri, 18 May 2001 it looks like Greg Lehey composed: GL-->> GL-->> GL-->> GL-->There are various things in the Ports Collection. I personally use a GL-->> GL-->camera with Compact Flash memory (a Nikon CoolPix 880, which I quite GL-->> GL-->like). I insert the CF card into a PCMCIA adaptor and mount it on my GL-->> GL-->laptop as an MS-DOS file system. See GL-->> GL-->http://echunga.lemis.com/~grog/diary-nov2000.html, 10 November 2000, GL-->> GL-->for more details. GL-->> GL--> GL-->> GL-->Greg GL-->> GL-->> Hello Family, GL-->> GL-->> I was reading the examples at GL-->> http://echunga.lemis.com/~grog/diary-nov2000.html and noticed that GL-->> the compact flash card was mounted from /dev/ad6s1 and my devices GL-->> stop at /dev/ad3* GL--> GL-->Your "devices" in /dev are just files which tell userland programs how GL-->to access the hardware devices. You can create them or remove them at GL-->will. To create /dev/ad8s1, the one you want, do: GL--> GL--> # cd /dev GL--> # ./MAKEDEV ad8s1 GL--> GL-->> I'm using a Toshiba-1715xcds laptop. GL-->> GL-->> I'm also getting some action in /var/log/messages that's noticing GL-->> the card (I think) GL-->> GL-->> (each line seperated by space) GL-->> ########################################################### GL-->> Jun 18 07:14:39 laptop pccardd[52]: wi0: Lucent Technologies GL-->> (WaveLAN/IEEE) inserted. GL-->> GL-->> Jun 18 07:14:44 laptop pccardd[52]: Card "SunDisk"("SDP") [5/3 GL-->> 0.6] [(null)] matched "SunDisk" ("/.*/") [(null)] [(null)] GL-->> GL-->> Jun 18 07:14:49 laptop /kernel: ata4 at port 0x280-0x28f irq 5 GL-->> slot 1 on pccard1 GL-->> GL-->> Jun 18 07:14:59 laptop /kernel: ata4-master: GL-->> ata_command: timeout waiting for intr GL-->> GL-->> Jun 18 07:15:00 laptop /kernel: ata4-master: identify failed GL-->> GL-->> Jun 18 07:14:59 laptop pccardd[52]: ata4: SunDisk (/.*/) GL-->> inserted. GL-->> GL-->> Jun 18 07:14:59 laptop pccardd[52]: pccardd started GL-->> ########################################################## GL--> GL-->OK, this looks like irq 5 is already in use for something else. This GL-->is a relatively common. You need to find out which IRQs are free, and GL-->which don't conflict with your Orinoco card. GL--> GL-->> Now this is a triple booted laptop and I've confirmed that the GL-->> SanDisk, CompactFlash PC Card Holder works with Linux, GL--> GL-->Great. You're more than half way there. GL--> GL-->> Windows_ME and now the final hurdle is FreeBSD. GL--> GL-->OK, take a look at the IRQs that Linux assigns to the Orinoco and the GL-->CF card. You can then create or change your /etc/pccard.conf to GL-->include the lines (these are in /etc/defaults/pccard.conf): GL--> GL--> # Generally available IRQs (Built-in sound-card owners remove 5) GL--> irq 3 5 10 11 13 15 GL--> GL-->Note the comment; I don't trust it too much, but it could be the sound GL-->card conflicting. Change the IRQs to include only the IRQs the system GL-->uses in Linux. Restart pccardd. That may be all you need to do. If GL-->not, come back and we'll continue. GL--> GL-->> When setting up my wirless Orinoco card FreeBSD was by far the GL-->> easiest, with Linux second (recompile kernel) GL--> GL-->This relates to my experience. I've spent some time on this issue GL-->with Debian in the last couple of days. A whole lot of us OzLabs GL-->people got the same new laptop and wireless card. It worked out of GL-->the box in FreeBSD, but Debian didn't have the module needed, so it GL-->needed to be compiled. I don't think you need to build a new Linux GL-->kernel. GL--> GL-->Greg GL-->-- GL-->When replying to this message, please copy the original recipients. GL-->If you don't, I may ignore the reply. GL-->For more information, see http://www.lemis.com/questions.html GL-->See complete headers for address and phone numbers GL--> Well, that worked. I removed the irq 5, found that Linux was giving the CompactFlash irq 9, I didn't have irq 9 in /etc/pccard.conf as available irq's so I added it. My biggest question is how did you determine /dev/ad8s1 was the device id for that ? In looking at the /dev directory my last closest dev to the one you suggested I use was /dev/ad3s4 then it jumped to your successful entry of /dev/ad8s1 I'm confused and grateful. (as usual) -- Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life." _\_v http://forwardslashunix.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:13:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from btconnex.net (mailtest.btconnex.net [209.47.192.8]) by hub.freebsd.org (Postfix) with SMTP id A353F37B407 for ; Tue, 19 Jun 2001 10:13:19 -0700 (PDT) (envelope-from dan@beanfield.com) Received: (qmail 93662 invoked from network); 19 Jun 2001 17:10:08 -0000 Received: from unknown (HELO beanfield.com) (192.168.66.18) by mailtest.btconnex.net with SMTP; 19 Jun 2001 17:10:08 -0000 Message-ID: <3B2F885F.75CADFC5@beanfield.com> Date: Tue, 19 Jun 2001 13:14:07 -0400 From: Dan Armstrong X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4m) X-Accept-Language: en MIME-Version: 1.0 To: evilfry@sg.freebsd.org Cc: Tony Wells , freebsd-questions@freebsd.org Subject: Re: Urgent help with Reverse Lookups and FTPD References: <3B2F74D7.C057B32F@beanfield.com> <3B2F820B.4147E4E8@camel.kdsi.net> <3B2F84CE.608E7F75@beanfield.com> <01062001044603.44515@evilfry.dyndns.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I already had that commented out.... without that, they cannot connect at all. With that out, it still tries to do the reverse, and lags for a LLOONNGG time and intermittantly, some timeout and some don't. Dan. James Lim wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi > > Are you using the normal ftpd? Does commenting out the following in > your /etc/host.allow works? > > # Prevent those with no reverse DNS from connecting. > #ALL : PARANOID : RFC931 20 : deny > > Hope this helps. > > On the last episode Wednesday 20 June 2001 00:58, Dan Armstrong wrote: > > Well, we have almost 1000 stub-bridged Ethernet LANs each on it's > > own private subnet tunneled over an ATM network back to a router. > > The long and the short of it is that we just cannot possibly manage > > reverse info for the entire network. > > > > Dan. > > > > Tony Wells wrote: > > > Do you really need thousands of addresses for your customers? > > > I'm making an assumption , but if you're assigning addresses > > > using DHCP, can you limit the range of addresses assigned to a > > > reasonable amount? If you only have say, 100 modems/xdsl/isdn or > > > whatever connections, you don't need ~64,000 IP's available. > > > > > > I would try looking into limiting the addresses assigned, and > > > then using /etc/hosts or reverse dns to resolve the IP's. > > > (Unless of course, you really need all those IP's.) > > > > > > Dan Armstrong wrote: > > > > We are a small ISP, and just turned up a new webserver running > > > > Free4.3 > > > > > > > > Most of our customers live on private (192.168) addresses and I > > > > am getting slaughtered with phone calls that they cannot ftp > > > > into their sites, and it is because their ftp programs don't > > > > necessarily wait for Free's ftpd to timeout doing the reverse > > > > lookup, for an address that of course does not have any reverse > > > > information for it. If I add their IP to the /etc/hosts BOOM > > > > they get in instantly. These thousands of addresses are all > > > > dynamically assigned, so the hosts file fix is not possible on > > > > this scale. Is there a way I can get it to stop? HELP! > > > > > > > > Dan. > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > - -- > Regards, > James Lim > http://sg.freebsd.org | http://www.bsd-geeks.org > -----BEGIN PGP SIGNATURE----- > Version: PGP 6.5.8 > > iQA/AwUBOy+GLppTakonTMbIEQLRawCghDlBMaOCON42Ph+eDyw603V9xJwAoPOa > Zk8EEVolF8KC84QoLxU44Cw8 > =2/HN > -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:30:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 7157837B403 for ; Tue, 19 Jun 2001 10:30:34 -0700 (PDT) (envelope-from akbeech@anchoragerescue.org) Received: from galaxy.anchoragerescue.org (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 47930155; Tue, 19 Jun 2001 09:30:33 -0800 (AKDT) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: Dan Armstrong , freebsd-questions@FreeBSD.ORG Subject: Re: Urgent help with Reverse Lookups and FTPD Date: Tue, 19 Jun 2001 09:30:33 -0800 X-Mailer: KMail [version 1.2] References: <3B2F74D7.C057B32F@beanfield.com> In-Reply-To: <3B2F74D7.C057B32F@beanfield.com> MIME-Version: 1.0 Message-Id: <01061909303301.64018@galaxy.anchoragerescue.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 19 June 2001 07:50, Dan Armstrong wrote: > We are a small ISP, and just turned up a new webserver running Free4.3 > > Most of our customers live on private (192.168) addresses and I am > getting slaughtered with phone calls that they cannot ftp into their > sites, and it is because their ftp programs don't necessarily wait for > Free's ftpd to timeout doing the reverse lookup, for an address that of > course does not have any reverse information for it. If I add their > IP to the /etc/hosts BOOM they get in instantly. These thousands of > addresses are all dynamically assigned, so the hosts file fix is not > possible on this scale. Is there a way I can get it to stop? HELP! > > Dan. You might want to look into Bind-9. This new version has the ability to do dynamic updates of your dns records from DHCP. You can find doccumentation on this in the bind-9 docs, or at ISC's website. http://www.isc.org. Beech -- ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:31:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 8E02237B406 for ; Tue, 19 Jun 2001 10:31:23 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5JHUwr57452; Tue, 19 Jun 2001 13:30:58 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 13:30:57 -0400 (EDT) From: Joe Clarke To: Dan Armstrong Cc: , Tony Wells , Subject: Re: Urgent help with Reverse Lookups and FTPD In-Reply-To: <3B2F885F.75CADFC5@beanfield.com> Message-ID: <20010619132915.F52646-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you comment that line out, make sure you have another line that allows for connections: ftpd: ALL : allow On my server I don't have this problem. Joe Clarke On Tue, 19 Jun 2001, Dan Armstrong wrote: > I already had that commented out.... without that, they cannot connect at > all. With that out, it still tries to do the reverse, and lags for a LLOONNGG > time and intermittantly, some timeout and some don't. > > Dan. > > > > James Lim wrote: > > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > Hi > > > > Are you using the normal ftpd? Does commenting out the following in > > your /etc/host.allow works? > > > > # Prevent those with no reverse DNS from connecting. > > #ALL : PARANOID : RFC931 20 : deny > > > > Hope this helps. > > > > On the last episode Wednesday 20 June 2001 00:58, Dan Armstrong wrote: > > > Well, we have almost 1000 stub-bridged Ethernet LANs each on it's > > > own private subnet tunneled over an ATM network back to a router. > > > The long and the short of it is that we just cannot possibly manage > > > reverse info for the entire network. > > > > > > Dan. > > > > > > Tony Wells wrote: > > > > Do you really need thousands of addresses for your customers? > > > > I'm making an assumption , but if you're assigning addresses > > > > using DHCP, can you limit the range of addresses assigned to a > > > > reasonable amount? If you only have say, 100 modems/xdsl/isdn or > > > > whatever connections, you don't need ~64,000 IP's available. > > > > > > > > I would try looking into limiting the addresses assigned, and > > > > then using /etc/hosts or reverse dns to resolve the IP's. > > > > (Unless of course, you really need all those IP's.) > > > > > > > > Dan Armstrong wrote: > > > > > We are a small ISP, and just turned up a new webserver running > > > > > Free4.3 > > > > > > > > > > Most of our customers live on private (192.168) addresses and I > > > > > am getting slaughtered with phone calls that they cannot ftp > > > > > into their sites, and it is because their ftp programs don't > > > > > necessarily wait for Free's ftpd to timeout doing the reverse > > > > > lookup, for an address that of course does not have any reverse > > > > > information for it. If I add their IP to the /etc/hosts BOOM > > > > > they get in instantly. These thousands of addresses are all > > > > > dynamically assigned, so the hosts file fix is not possible on > > > > > this scale. Is there a way I can get it to stop? HELP! > > > > > > > > > > Dan. > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > - -- > > Regards, > > James Lim > > http://sg.freebsd.org | http://www.bsd-geeks.org > > -----BEGIN PGP SIGNATURE----- > > Version: PGP 6.5.8 > > > > iQA/AwUBOy+GLppTakonTMbIEQLRawCghDlBMaOCON42Ph+eDyw603V9xJwAoPOa > > Zk8EEVolF8KC84QoLxU44Cw8 > > =2/HN > > -----END PGP SIGNATURE----- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:32:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from email04.aon.at (WARSL401PIP7.highway.telekom.at [195.3.96.115]) by hub.freebsd.org (Postfix) with SMTP id AEF9C37B406 for ; Tue, 19 Jun 2001 10:32:08 -0700 (PDT) (envelope-from martin.schreiber@co-merce.at) Received: (qmail 178796 invoked from network); 19 Jun 2001 17:32:05 -0000 Received: from n801p031.adsl.highway.telekom.at (HELO computername) ([62.47.44.31]) (envelope-sender ) by qmail4.highway.telekom.at (qmail-ldap-1.03) with SMTP for ; 19 Jun 2001 17:32:05 -0000 Message-ID: <001801c0f8e5$7f735d00$8200000a@computername> From: "Martin Schreiber" To: Cc: References: <20010619115027.Q52646-100000@shumai.marcuscom.com> Subject: Re: build failed Date: Tue, 19 Jun 2001 19:30:13 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is the error message when running make : cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extens ions -ansi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/tlphy.c {standard input}: cc: Assembler messages: Internal compiler error: program cc1 got fatal signal 11{standard input}:0: Warning: *** Error code 1 end of file in string: inserted '"' Stop in /usr/src/sys/compile/TOR. {standard input}:249: tor# Warning: .stabs: Missing comma tor# sorry that i forgot the MAIN thing in the first mail... thanks martin ----- Original Message ----- From: "Joe Clarke" To: "Martin Schreiber" Cc: Sent: Tuesday, June 19, 2001 5:50 PM Subject: Re: build failed > Can you please include the errors you get when compiling? > > Joe Clarke > > On Tue, 19 Jun 2001, Martin Schreiber wrote: > > > > > Dear FreeBSD Team, > > > > i have tried to build a new kernel because i want to use my freebsd maschine as a gateway. > > I have 2 NICs installed ( 3com and SCM ) and the config is running fine, also the make depend, > > but the make failed. > > > > Can you help me please ? > > > > thanks > > martin > > > > > > the kernel file is attached > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:35:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id 8DE0D37B406 for ; Tue, 19 Jun 2001 10:35:15 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5JHZIw57459; Tue, 19 Jun 2001 13:35:18 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Tue, 19 Jun 2001 13:35:18 -0400 (EDT) From: Joe Clarke To: Martin Schreiber Cc: Subject: Re: build failed In-Reply-To: <001801c0f8e5$7f735d00$8200000a@computername> Message-ID: <20010619133343.G52646-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Signal 11's are usually related to faulty hardware. I use to run into these all the time when I had bad memory. After replacing the DIMM, everything worked much more reliably. Joe Clarke On Tue, 19 Jun 2001, Martin Schreiber wrote: > > This is the error message when running make : > > cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extens > ions -ansi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include > opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/tlphy.c > {standard input}: cc: Assembler messages: > Internal compiler error: program cc1 got fatal signal 11{standard input}:0: > Warning: *** Error code 1 > end of file in string: inserted '"' > > Stop in /usr/src/sys/compile/TOR. > {standard input}:249: tor# Warning: .stabs: Missing comma > > tor# > > sorry that i forgot the MAIN thing in the first mail... > > thanks > martin > ----- Original Message ----- > From: "Joe Clarke" > To: "Martin Schreiber" > Cc: > Sent: Tuesday, June 19, 2001 5:50 PM > Subject: Re: build failed > > > > Can you please include the errors you get when compiling? > > > > Joe Clarke > > > > On Tue, 19 Jun 2001, Martin Schreiber wrote: > > > > > > > > Dear FreeBSD Team, > > > > > > i have tried to build a new kernel because i want to use my freebsd > maschine as a gateway. > > > I have 2 NICs installed ( 3com and SCM ) and the config is running fine, > also the make depend, > > > but the make failed. > > > > > > Can you help me please ? > > > > > > thanks > > > martin > > > > > > > > > the kernel file is attached > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:36:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sleipner.eiffel.dk (sub19-229.member.dsl-only.net [63.105.19.229]) by hub.freebsd.org (Postfix) with ESMTP id E0C6C37B401 for ; Tue, 19 Jun 2001 10:36:35 -0700 (PDT) (envelope-from flemming@froekjaer.org) Received: from froekjaer.org (sub19-225.member.dsl-only.net [63.105.19.225]) by sleipner.eiffel.dk (8.11.1/8.11.1) with ESMTP id f5JHbkQ65439; Tue, 19 Jun 2001 10:37:47 -0700 (PDT) (envelope-from flemming@froekjaer.org) Message-ID: <3B2F8DA1.E7B84B16@froekjaer.org> Date: Tue, 19 Jun 2001 10:36:33 -0700 From: Flemming Froekjaer X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: rshea@thecubagroup.com Cc: questions@FreeBSD.ORG Subject: Re: dump(8) -> Windows2000 Machine [was Re: Undelete?] References: <000c01c0f818$a2c077c0$a3d70880@darkstar>; from bfoz@glue.umd.edu on Mon, Jun 18, 2001 at 01:03:45PM -0400 <20010619014522.CBFF11F9D54@deborah.paradise.net.nz> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Richard Shea wrote: > I've got a Windows2000 machine on the same LAN as my FreeBSD machine and I'd > like to dump(8) to a disk on that machine (from there I can use a CD-burner). > > The man page for dump mentions that if I used host:file as a target I can > backup to another machine. On the surface I might then think that : > > -f 192.168.10.2:C:\somedirectoryonwindows\ > > would work but ITRW I've got a feeling this _won't_ work ! As the resulting > files will be quite large I don't just want to suck it and see. Is anyone out there > "dump"ing to a non-Unix machine and willing to tell me how they do it ? > You could use smbfs to mount the windows drive first, and then use -f /mnt/windowsshare/dumpfile I haven't tryed this, but it shuld work. \Flemming To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:39:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ambar.ofermundo.com.ar (h066060007247.isol.net.ar [66.60.7.247]) by hub.freebsd.org (Postfix) with ESMTP id 75B7837B403 for ; Tue, 19 Jun 2001 10:39:52 -0700 (PDT) (envelope-from daniel@grunblatt.com.ar) Received: from h066060007247.isol.net.ar (h066060007247.isol.net.ar [66.60.7.247]) by ambar.ofermundo.com.ar (8.11.4/8.11.4) with ESMTP id f5JHdtB07041 for ; Tue, 19 Jun 2001 14:39:55 -0300 Date: Tue, 19 Jun 2001 14:39:55 -0300 (ART) From: Daniel Grunblatt X-Sender: daniel@ambar.ofermundo.com.ar To: freebsd-questions@freebsd.org Subject: PCMCIA HANG Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I did a 'make world' and compiled my kernel with the sources from Jun 8 and since that every time I try to use any pcmcia card my laptop just hangs, without droping my to ddb, I'm on a Sony VAIO PCG-XG38, can any one tell me if someone have already fixed this and which file I have to patch to solve this problem. Thanks in advance. P.S. With "try to use" I mean do an ifconfig on the net card or initialize the modem. sorry if you have already discussed this I'm new to the list. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 10:53:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guardian.hq.synetics.com (guardian.hq.synetics.com [209.125.204.13]) by hub.freebsd.org (Postfix) with ESMTP id B87A037B401 for ; Tue, 19 Jun 2001 10:53:53 -0700 (PDT) (envelope-from rowczarski@synetics.com) Subject: Re: Urgent help with Reverse Lookups and FTPD To: tony@camel.kdsi.net Cc: freebsd-questions@FreeBSD.ORG X-Mailer: Lotus Notes Release 5.0.4a July 24, 2000 Message-ID: From: "Rene Owczarski" Date: Tue, 19 Jun 2001 14:15:08 -0400 X-MIMETrack: Serialize by Router on Guardian/HQ/Synetics(Release 5.07a |May 14, 2001) at 06/19/2001 01:43:02 PM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Have you considered making ftpd a daemon instead of running it from inetd? -Rene If you comment that line out, make sure you have another line that allows for connections: ftpd: ALL : allow On my server I don't have this problem. Joe Clarke On Tue, 19 Jun 2001, Dan Armstrong wrote: > I already had that commented out.... without that, they cannot connect at > all. With that out, it still tries to do the reverse, and lags for a LLOONNGG > time and intermittantly, some timeout and some don't. > > Dan. > > > > James Lim wrote: > > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > Hi > > > > Are you using the normal ftpd? Does commenting out the following in > > your /etc/host.allow works? > > > > # Prevent those with no reverse DNS from connecting. > > #ALL : PARANOID : RFC931 20 : deny > > > > Hope this helps. > > > > On the last episode Wednesday 20 June 2001 00:58, Dan Armstrong wrote: > > > Well, we have almost 1000 stub-bridged Ethernet LANs each on it's > > > own private subnet tunneled over an ATM network back to a router. > > > The long and the short of it is that we just cannot possibly manage > > > reverse info for the entire network. > > > > > > Dan. > > > > > > Tony Wells wrote: > > > > Do you really need thousands of addresses for your customers? > > > > I'm making an assumption , but if you're assigning addresses > > > > using DHCP, can you limit the range of addresses assigned to a > > > > reasonable amount? If you only have say, 100 modems/xdsl/isdn or > > > > whatever connections, you don't need ~64,000 IP's available. > > > > > > > > I would try looking into limiting the addresses assigned, and > > > > then using /etc/hosts or reverse dns to resolve the IP's. > > > > (Unless of course, you really need all those IP's.) > > > > > > > > Dan Armstrong wrote: > > > > > We are a small ISP, and just turned up a new webserver running > > > > > Free4.3 > > > > > > > > > > Most of our customers live on private (192.168) addresses and I > > > > > am getting slaughtered with phone calls that they cannot ftp > > > > > into their sites, and it is because their ftp programs don't > > > > > necessarily wait for Free's ftpd to timeout doing the reverse > > > > > lookup, for an address that of course does not have any reverse > > > > > information for it. If I add their IP to the /etc/hosts BOOM > > > > > they get in instantly. These thousands of addresses are all > > > > > dynamically assigned, so the hosts file fix is not possible on > > > > > this scale. Is there a way I can get it to stop? HELP! > > > > > > > > > > Dan. > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > - -- > > Regards, > > James Lim > > http://sg.freebsd.org | http://www.bsd-geeks.org > > -----BEGIN PGP SIGNATURE----- > > Version: PGP 6.5.8 > > > > iQA/AwUBOy+GLppTakonTMbIEQLRawCghDlBMaOCON42Ph+eDyw603V9xJwAoPOa > > Zk8EEVolF8KC84QoLxU44Cw8 > > =2/HN > > -----END PGP SIGNATURE----- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11: 1:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from exgw2.lumeta.com (exgw2.lumeta.com [65.198.68.66]) by hub.freebsd.org (Postfix) with ESMTP id AC8AD37B401; Tue, 19 Jun 2001 11:01:10 -0700 (PDT) (envelope-from ryan@lumeta.com) Received: from lucy.corp.lumeta.com (h65-198-68-133.lumeta.com [65.198.68.133]) by exgw2.lumeta.com (Postfix) with ESMTP id 60F477572; Tue, 19 Jun 2001 14:01:10 -0400 (EDT) Received: from lumeta.com (rmartin.corp.lumeta.com [65.198.68.227]) by lucy.corp.lumeta.com (Postfix) with ESMTP id 3FE6B107E3; Tue, 19 Jun 2001 14:01:10 -0400 (EDT) Message-ID: <3B2F9366.1B3013F@lumeta.com> Date: Tue, 19 Jun 2001 14:01:10 -0400 From: Ryan Martin Organization: Lumeta Corp. X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org, freebsd-ports@freebsd.org Subject: GTop errors in kvm_open & kvm_argv Content-Type: multipart/mixed; boundary="------------2228834F91AA7DF3A30AC538" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------2228834F91AA7DF3A30AC538 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I'm getting a persistent stream of errors when I run GTop. Every polling interval, I get this message for every PID: kvm_open: error reading /proc/1/mem: Bad address Also once per poll, I get the error: LibGTop-Server: kvm_getargv (5): Bad address Any idea what causes this? I'm running GNOME 1.4 on XFree86 4.10 on FreeBSD 4.3 STABLE. My system details follow. bash 14 $ uname -a FreeBSD rmartin.corp.lumeta.com 4.3-STABLE FreeBSD 4.3-STABLE #10: Thu Jun 14 16:51:48 EDT 2001 ryan@rmartin.corp.lumeta.com:/u1/src/sys/compile/RMARTIN i386 bash 15 $ df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad0s3a 49583 31719 13898 70% / /dev/ad0s3f 7621794 4931799 2080252 70% /u1 /dev/ad0s4e 508143 9976 457516 2% /var /dev/ad0s4f 7341524 530114 6224089 8% /u2 /dev/ad0s2 12305789 5461732 6844057 44% /ntfs/c procfs 4 4 0 100% /proc mfs:51 124015 10 114084 0% /tmp linprocfs 4 4 0 100% /u1/compat/linux/proc bash 22 $ ls -l libgtop* -r-xr-xr-x 1 root wheel 824 Jun 19 12:36 libgtop-config -r-xr-xr-x 1 root wheel 55816 Jun 19 12:36 libgtop_daemon -rwxr-sr-x 1 root kmem 26564 Jun 19 12:36 libgtop_server bash 23 $ pkg_version -v | grep gtop gtop-1.0.13 = up-to-date with port libgtop-1.0.12 = up-to-date with port -- Ryan Martin (ryan@lumeta.com) Quality Assurance Engineer Lumeta Corp. Phone: (732)357-3523 Fax: (732)564-0731 --------------2228834F91AA7DF3A30AC538 Content-Type: text/x-vcard; charset=us-ascii; name="ryan.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Ryan Martin Content-Disposition: attachment; filename="ryan.vcf" begin:vcard n:Martin;Ryan tel;work:866-LUMETA7 x-mozilla-html:FALSE url:http://www.lumeta.com org:Lumeta Corp. adr:;;220 Davidson Ave.;Somerset;New Jersey;08844;USA version:2.1 email;internet:ryan@lumeta.com title:Quality Assurance Engineer x-mozilla-cpt:;-27744 fn:Ryan Martin end:vcard --------------2228834F91AA7DF3A30AC538-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11:20:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from marcos.networkcs.com (marcos.networkcs.com [137.66.16.1]) by hub.freebsd.org (Postfix) with ESMTP id 5B5EC37B403 for ; Tue, 19 Jun 2001 11:20:45 -0700 (PDT) (envelope-from hinman@networkcs.com) Received: from us.msp.networkcs.com (us.networkcs.com [137.66.12.15]) by marcos.networkcs.com (8.9.3/8.9.3) with ESMTP id NAA61913; Tue, 19 Jun 2001 13:20:44 -0500 (CDT) (envelope-from hinman@networkcs.com) Received: (from hinman@localhost) by us.msp.networkcs.com (8.9.2/8.9.2) id NAA69966; Tue, 19 Jun 2001 13:20:44 -0500 (CDT) (envelope-from hinman) Date: Tue, 19 Jun 2001 13:20:44 -0500 From: "Lee E. Hinman Ph.D." To: "Deakle, Jeff H." Cc: freebsd-questions@FreeBSD.ORG Subject: Re: KVM switches Message-ID: <20010619132043.A66952@us.msp.networkcs.com> References: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <51F410294EBDD3118F6600805F8B207833B9AD@ntmail1.ener.com>; from JHDeakle@ener.com on Mon, Jun 18, 2001 at 05:02:35PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've used the Raritan Switchman 2-port KVM at home with FreeBSD and Win2k works perfectly even at 1600x1200. BTW I have found that the quality of the cables used to connect to the KVM make a huge difference. http://www.raritan.com On 06/18, Deakle, Jeff H. wrote: > Well after searching the questions here all I see is people having problems > with their KVM switches. 'Has anyone had any luck with any of the switches > on the market? If so could you let me know which one works with NT & FBSD? > > > Thanks! > > Jeff Deakle > Enercon Engineering, Inc. > (281)721-4680 > www.ener.com End included message from Deakle, Jeff H. -- Lee Hinman hinman@networkcs.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11:21: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id A6DB837B406 for ; Tue, 19 Jun 2001 11:20:59 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.11.3/8.11.3) id f5JIKvW25331; Tue, 19 Jun 2001 13:20:57 -0500 (CDT) (envelope-from dan) Date: Tue, 19 Jun 2001 13:20:57 -0500 From: Dan Nelson To: burningclown@westhost43.westhost.com Cc: freebsd-questions Subject: Re: ksh93 vs. pdksh Message-ID: <20010619132057.B6890@dan.emsphone.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.19i X-OS: FreeBSD 5.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Jun 19), burningclown@westhost43.westhost.com said: > So now I have -both- pdksh and ksh93 on my system. The thing is, I can't > figure out what starts when I type the command 'ksh.' It -used- to be > pdksh, of course. Maybe it still is. All I know is that when I type 'man > ksh' I get the man page for pdksh; when I type 'man ksh93' I get the man > page for ksh93; when I type 'ksh93' I get 'command not found' and when I > type 'ksh' ... something starts up. To see that a package contains, take a look at the pkg-plist file if you've got the ports tree, or run "pkg_info -L packagename" if you have the package already installed. It looks like pdksh installs /usr/local/bin/ksh, and ksh93 installs /usr/local/bin/ksh93. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11:33:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sleipner.eiffel.dk (sub19-229.member.dsl-only.net [63.105.19.229]) by hub.freebsd.org (Postfix) with ESMTP id C137337B401 for ; Tue, 19 Jun 2001 11:33:18 -0700 (PDT) (envelope-from flemming@froekjaer.org) Received: from froekjaer.org (sub19-225.member.dsl-only.net [63.105.19.225]) by sleipner.eiffel.dk (8.11.1/8.11.1) with ESMTP id f5JIYZQ66192 for ; Tue, 19 Jun 2001 11:34:36 -0700 (PDT) (envelope-from flemming@froekjaer.org) Message-ID: <3B2F9AF2.6301927B@froekjaer.org> Date: Tue, 19 Jun 2001 11:33:22 -0700 From: Flemming Froekjaer X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: mount_smbfs. no /dev/net/nsmb* device Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I finaly got smbfs to build, and i can load the smbfs kernel module. > kldstat Id Refs Address Size Name 1 4 0xc0100000 22db84 kernel 2 1 0xc032e000 1e11c smbfs.ko 3 1 0xc19a6000 19000 usb.ko 4 1 0xc19ce000 2000 green_saver.ko When i try to mount a smb share it askes me for a password, and then reports no /dev/net/nsmb* device > mount_smbfs -I 192.168.41.100 //flemming@archimedes/flemming /mnt/backup/archimedes.system/ Password: mount_smbfs: can't get handle to requester (no /dev/net/nsmb* device) Looking in /dev there is no net directory, but there is a /dev/nsmb0 device. > ls -l /dev/nsmb* crw-r--r-- 1 root wheel 144, 0 Jun 15 12:56 /dev/nsmb0 What am I doing wrong. \Flemming To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11:50:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11005.mail.yahoo.com (web11005.mail.yahoo.com [216.136.131.55]) by hub.freebsd.org (Postfix) with SMTP id 676C637B401 for ; Tue, 19 Jun 2001 11:50:09 -0700 (PDT) (envelope-from andyelf@yahoo.com) Message-ID: <20010619185009.88100.qmail@web11005.mail.yahoo.com> Received: from [192.193.210.34] by web11005.mail.yahoo.com; Tue, 19 Jun 2001 11:50:09 PDT Date: Tue, 19 Jun 2001 11:50:09 -0700 (PDT) From: Andrei Popov Subject: Re: MGA PowerDesk To: simond@irrelevant.org Cc: freebsd-questions@freebsd.org In-Reply-To: <20010619102431.C38995@irrelevant.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- simond@irrelevant.org wrote: > You could always try the x11/mgapdesk port Yow! This rocks! I actually did not expect that it already *is* there... Simon, thanks. __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 11:57:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id B066E37B406 for ; Tue, 19 Jun 2001 11:57:53 -0700 (PDT) (envelope-from khera@kcilink.com) Received: by yertle.kciLink.com (Postfix, from userid 100) id 3A50A2E463; Tue, 19 Jun 2001 14:57:49 -0400 (EDT) To: questions@freebsd.org Newsgroups: ml.freebsd.questions Subject: Re: opera & zombie processes References: From: Vivek Khera Date: 19 Jun 2001 14:57:48 -0400 Message-ID: Organization: Khera Communications, Inc., Rockville, MD Lines: 22 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Posted-To: ml.freebsd.questions Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The following message is a courtesy copy of an article that has been posted to ml.freebsd.questions as well. >>>>> "MB" == Marco Beishuizen writes: MB> I have a question about Opera 5.0 under FreeBSD 4.0-RELEASE. When MB> I'm browsing with Opera a lot of zombie processes are MB> created. This goes on until the maximum number of processes are MB> reached. After that no process can be started. I found I had a similar issue with Lyris running under Linux emulation (until they came up with a FreeBSD native version). What was happening was that Lyris was creating and destroying dozens of threads. Under linux emulation, these are kernel threads, and treated as processes by the kernel. However, the linux apps don't see fit to reap these processes, as linux does it automagically. The only real fix is to make the app reap the zombies periodically, or convince opera to come out with a fbsd native version. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12: 0: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 9D58337B401 for ; Tue, 19 Jun 2001 12:00:03 -0700 (PDT) (envelope-from khera@kcilink.com) Received: by yertle.kciLink.com (Postfix, from userid 100) id 0FA392E45F; Tue, 19 Jun 2001 15:00:03 -0400 (EDT) To: questions@freebsd.org Newsgroups: ml.freebsd.questions Subject: Re: can I tar and copy src & ports after cvsupping? References: <20010619005217.82184.qmail@web12003.mail.yahoo.com> <200106190057.f5J0vIs02822@xyzzy.intranet.snsonline.net> From: Vivek Khera Date: 19 Jun 2001 15:00:02 -0400 Message-ID: Organization: Khera Communications, Inc., Rockville, MD Lines: 14 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) In-Reply-To: <200106190057.f5J0vIs02822@xyzzy.intranet.snsonline.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Posted-To: ml.freebsd.questions Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The following message is a courtesy copy of an article that has been posted to ml.freebsd.questions as well. >>>>> "MS" == Mark Sergeant writes: MS> This is in the archives. The easiest way to fix it is rm -rf MS> /usr/ports/www/jakarta-tomcat until the next time you cvsup. the correct fix is to remove the checkouts file for your ports tree. Details are in mailing list archive. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12: 9:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from 1upmc-msximc1.isdip.upmc.edu (1upmc-msximc1.isdip.upmc.edu [128.147.18.39]) by hub.freebsd.org (Postfix) with ESMTP id AE05137B401 for ; Tue, 19 Jun 2001 12:09:12 -0700 (PDT) (envelope-from personrp@ccbh.com) Received: by 1upmc-msximc1.isdip.upmc.edu with Internet Mail Service (5.5.2653.19) id ; Tue, 19 Jun 2001 15:10:14 -0400 Message-ID: <46AEB8C1B628D511969200508B6FE42A66840A@1upmc-msx6.isdip.upmc.edu> From: "Person, Roderick" To: 'Vivek Khera' , questions@freebsd.org Subject: RE: opera & zombie processes Date: Tue, 19 Jun 2001 15:10:26 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C0F8F3.7F49AC90" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C0F8F3.7F49AC90 Content-Type: text/plain; charset="iso-8859-1" If this is the cause of the problem with opera is there something else in conjuction that causes this. It other words linux emulation with and I have been using Opera for at least 6 months and I have noticed this problem at all. I'm not using the port but the tar from opera.com. Roderick P. Person Programmer II personrp@ccbh.com http://www.ccbh.com "Fascism is coming back, baby!" - Kevin Bacon - JFK > -----Original Message----- > From: Vivek Khera [mailto:khera@kcilink.com] > Sent: June 19, 2001 2:58 PM > To: questions@freebsd.org > Subject: Re: opera & zombie processes > > > The following message is a courtesy copy of an article > that has been posted to ml.freebsd.questions as well. > > >>>>> "MB" == Marco Beishuizen writes: > > MB> I have a question about Opera 5.0 under FreeBSD 4.0-RELEASE. When > MB> I'm browsing with Opera a lot of zombie processes are > MB> created. This goes on until the maximum number of processes are > MB> reached. After that no process can be started. I found > > I had a similar issue with Lyris running under Linux emulation (until > they came up with a FreeBSD native version). > > What was happening was that Lyris was creating and destroying dozens > of threads. Under linux emulation, these are kernel threads, and > treated as processes by the kernel. However, the linux apps don't see > fit to reap these processes, as linux does it automagically. > > The only real fix is to make the app reap the zombies periodically, or > convince opera to come out with a fbsd native version. > -- > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > Vivek Khera, Ph.D. Khera Communications, Inc. > Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 > AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > ------_=_NextPart_001_01C0F8F3.7F49AC90 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: opera & zombie processes

If this is the cause of the problem with opera is = there something else in conjuction that causes this.
It other words linux emulation with and  I have = been using Opera for at least 6 months and I have noticed this problem = at all. I'm not using the port but the tar from opera.com.

Roderick P. Person
Programmer II
personrp@ccbh.com
http://www.ccbh.com

"Fascism is coming back, baby!"
        - Kevin = Bacon - JFK




> -----Original Message-----
> From: Vivek Khera [mailto:khera@kcilink.com]
> Sent: June 19, 2001 2:58 PM
> To: questions@freebsd.org
> Subject: Re: opera & zombie = processes
>
>
> The following message is a courtesy copy of an = article
> that has been posted to ml.freebsd.questions as = well.
>
> >>>>> "MB" =3D=3D = Marco Beishuizen <mbeis@planet.nl> writes:
>
> MB> I have a question about Opera 5.0 under = FreeBSD 4.0-RELEASE. When
> MB> I'm browsing with Opera a lot of zombie = processes are
> MB> created. This goes on until the maximum = number of processes are
> MB> reached. After that no process can be = started. I found
>
> I had a similar issue with Lyris running under = Linux emulation (until
> they came up with a FreeBSD native = version). 
>
> What was happening was that Lyris was creating = and destroying dozens
> of threads.  Under linux emulation, these = are kernel threads, and
> treated as processes by the kernel.  = However, the linux apps don't see
> fit to reap these processes, as linux does it = automagically. 
>
> The only real fix is to make the app reap the = zombies periodically, or
> convince opera to come out with a fbsd native = version.
> --
> = =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-= =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D
> Vivek Khera, = Ph.D.           &= nbsp;    Khera Communications, Inc.
> Internet: = khera@kciLink.com       Rockville, = MD       +1-240-453-8497
> AIM: vivekkhera Y!: vivek_khera   http://www.khera.org/~vivek/
>
> To Unsubscribe: send mail to = majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" = in the body of the message
>

------_=_NextPart_001_01C0F8F3.7F49AC90-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12:10:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 8AFBB37B407 for ; Tue, 19 Jun 2001 12:10:25 -0700 (PDT) (envelope-from khera@kcilink.com) Received: by yertle.kciLink.com (Postfix, from userid 100) id 1FACF2E462; Tue, 19 Jun 2001 15:10:23 -0400 (EDT) To: questions@freebsd.org Newsgroups: ml.freebsd.questions Subject: Re: SSH and PAM still broken? References: <20010619111333.D65613@msu.edu> From: Vivek Khera Date: 19 Jun 2001 15:10:22 -0400 Message-ID: Organization: Khera Communications, Inc., Rockville, MD Lines: 17 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) In-Reply-To: <20010619111333.D65613@msu.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Posted-To: ml.freebsd.questions Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The following message is a courtesy copy of an article that has been posted to ml.freebsd.questions as well. >>>>> "EG" == Edward Glowacki writes: EG> around a while. The best information on how to fix it I've found EG> was to update /etc/pam.conf, except the version I have already has EG> the prescribed fixes. Is there something I missed here, or is EG> PAM&SSH just broken? This is a wholly different problem from what you found in the archives about fixing pam.conf. It has to do with a busted libpam. Fix is to update to a newer snapshot (I just replaced libpam and associated modules). The busted libpam existed for about one or two days. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12:22:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from Mercury.acs.unt.edu (mercury.acs.unt.edu [129.120.220.1]) by hub.freebsd.org (Postfix) with ESMTP id 41FD137B403 for ; Tue, 19 Jun 2001 12:22:52 -0700 (PDT) (envelope-from rbb0002@unt.edu) Received: from eaglemail.unt.edu (eaglemail.unt.edu [129.120.209.20]) by Mercury.acs.unt.edu (8.8.8/8.8.8) with ESMTP id OAA16149; Tue, 19 Jun 2001 14:22:50 -0500 (CDT) Received: (from nobody@localhost) by eaglemail.unt.edu (8.9.3/8.9.3) id OAA21612; Tue, 19 Jun 2001 14:22:51 -0500 To: simond@irrelevant.org Subject: Re: MGA PowerDesk Message-ID: <992978570.3b2fa68aef458@eaglemail.unt.edu> Date: Tue, 19 Jun 2001 14:22:50 -0500 (CDT) From: Bob Bomar Cc: questions@freebsd.org References: <20010619055149.67584.qmail@web11001.mail.yahoo.com> <20010619102431.C38995@irrelevant.org> In-Reply-To: <20010619102431.C38995@irrelevant.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.3 X-Originating-IP: 32.101.18.66 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Where is the port for MGA PowerDesk, I can not find it in /usr/ports/x11/ . Bob Bomar To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12:27:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from blueyonder.co.uk (pcow034o.blueyonder.co.uk [195.188.53.122]) by hub.freebsd.org (Postfix) with ESMTP id 0F6FF37B407 for ; Tue, 19 Jun 2001 12:27:20 -0700 (PDT) (envelope-from andrew@cream.org) Received: from andrew.cream.org ([62.31.80.67]) by blueyonder.co.uk with Microsoft SMTPSVC(5.5.1877.687.68); Tue, 19 Jun 2001 20:29:30 +0100 Message-Id: <5.1.0.14.0.20010619202511.00a0fb80@ice.cream.org> X-Sender: andrew@ice.cream.org X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 19 Jun 2001 20:27:17 +0100 To: Bob Bomar From: Andrew Boothman Subject: Re: MGA PowerDesk Cc: questions@freebsd.org, simond@irrelevant.org In-Reply-To: <992978570.3b2fa68aef458@eaglemail.unt.edu> References: <20010619102431.C38995@irrelevant.org> <20010619055149.67584.qmail@web11001.mail.yahoo.com> <20010619102431.C38995@irrelevant.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 02:22 PM 19/06/01 -0500, Bob Bomar wrote: >Where is the port for MGA PowerDesk, I can not find it >in /usr/ports/x11/ . It is on my system /usr/ports/x11/mgapdesk Also, http://www.freebsd.org/cgi/ports.cgi?query=mgapdesk&stype=all Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12:47: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f197.law11.hotmail.com [64.4.17.197]) by hub.freebsd.org (Postfix) with ESMTP id 6DF8237B401 for ; Tue, 19 Jun 2001 12:47:03 -0700 (PDT) (envelope-from cmbenjamin@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 12:47:02 -0700 Received: from 24.132.93.11 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 19:47:02 GMT X-Originating-IP: [24.132.93.11] From: "Clyde Clyde" To: freebsd-questions@FreeBSD.ORG Date: Tue, 19 Jun 2001 21:47:02 +0200 Mime-Version: 1.0 Content-Type: text/html Message-ID: X-OriginalArrivalTime: 19 Jun 2001 19:47:02.0438 (UTC) FILETIME=[9C4F1460:01C0F8F8] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG
hello i have a guesstion
 
and that is i can't find the right software for  mine AMD K6-12
 
mine video and audio don't play and mine monitor just give me
 
some ugly colors  can you helm me out with it
 
oek thanx hope to hear from you soon.

Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 12:48:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f112.law11.hotmail.com [64.4.17.112]) by hub.freebsd.org (Postfix) with ESMTP id 7FAAC37B401 for ; Tue, 19 Jun 2001 12:48:11 -0700 (PDT) (envelope-from cmbenjamin@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 12:48:10 -0700 Received: from 24.132.93.11 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 19 Jun 2001 19:48:10 GMT X-Originating-IP: [24.132.93.11] From: "Clyde Clyde" To: freebsd-questions@FreeBSD.ORG Date: Tue, 19 Jun 2001 21:48:10 +0200 Mime-Version: 1.0 Content-Type: text/html Message-ID: X-OriginalArrivalTime: 19 Jun 2001 19:48:10.0742 (UTC) FILETIME=[C5057160:01C0F8F8] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG
hello i have a guesstion
 
and that is i can't find the right software for  mine AMD K6-12
 
mine video and audio don't play and mine monitor just give me
 
some ugly colors  can you helm me out with it
 
do you have got some drivers for me off  creative soundblaster PCI 64
oke thanx hope to hear from you soon.

Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13: 0:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cableworks.cgocable.net (cableworks.cgocable.net [24.226.1.43]) by hub.freebsd.org (Postfix) with ESMTP id 9324537B401 for ; Tue, 19 Jun 2001 13:00:06 -0700 (PDT) (envelope-from ryan@western.wave.ca) Received: from pan (d141-68-30.home.cgocable.net [24.141.68.30]) by cableworks.cgocable.net (8.9.3/8.9.3) with SMTP id PAA16071 for ; Tue, 19 Jun 2001 15:40:56 -0400 (EDT) Message-ID: <003b01c0f8fa$9b424d60$1e448d18@elysia.ca> From: "Ryan" To: Subject: Network Strangeness Date: Tue, 19 Jun 2001 16:01:19 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0038_01C0F8D9.13F6B1A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0038_01C0F8D9.13F6B1A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I've been struggling with a problem for quite some time now. = I'm running FreeBSD 4.3-STABLE, and the system is normal except that it = will sporadically become unresponsive to the network. The system will = drop all connections to it and not return any pings. I've beening = running the -STABLE branch on the system for quite some time now and = haven't experienced any problems until this one, and since then I've = tried network cable changes, network card changes, processor changes, = motherboard changes, and I've even tried using the system with OpenBSD = instead, but the same problem persists. Recently I was hanging out in the #FreeBSDhelp channel on EFnet and = ran into someone experience the same problem (s_79@yahoo.com). The only = similarites I can see between our configurations is that we're both = running 4.3-STABLE on i586 systems. Here are the full specs on the two = systems with the problem: Pentium 100 (i586), 32MB RAM, 1.7GB HDD Ethernet card: SOHO NDC 10/100 (dc) OS: FreeBSD 4.3-RELEASE Pentium 120 (i586), 48MB RAM, 4.2GB HDD Ethernet card: Magitronix NE2000 Compatible (ed) OS: FreeBSD 4.3-STABLE Hopefully someone out there has an idea of whats going wrong. Thanks = in advance for any suggestions that could be made. Ryan ryan@western.wave.ca and=20 'Fate' s_79@yahoo.com ------=_NextPart_000_0038_01C0F8D9.13F6B1A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
    Hello, I've been = struggling with=20 a problem for quite some time now. I'm running FreeBSD 4.3-STABLE, and = the=20 system is normal except that it will sporadically become unresponsive to = the=20 network. The system will drop all connections to it and not return any = pings.=20 I've beening running the -STABLE branch on the system for quite some = time now=20 and haven't experienced any problems until this one, and since then I've = tried=20 network cable changes, network card changes, processor changes, = motherboard=20 changes, and I've even tried using the system with OpenBSD instead, but = the same=20 problem persists.
    Recently I was = hanging out in=20 the #FreeBSDhelp channel on EFnet and ran into someone experience the = same=20 problem (s_79@yahoo.com). The only = similarites I can see between our configurations is that we're both = running=20 4.3-STABLE on i586 systems. Here are the full specs on the two systems = with the=20 problem:
 
Pentium 100 (i586), 32MB RAM, 1.7GB = HDD
Ethernet=20 card: SOHO NDC 10/100 (dc)
OS: FreeBSD 4.3-RELEASE
 
Pentium 120 (i586), 48MB RAM, 4.2GB=20 HDD
Ethernet card: Magitronix NE2000 = Compatible=20 (ed)
OS: FreeBSD 4.3-STABLE
 
    Hopefully someone = out there has=20 an idea of whats going wrong. Thanks in advance for any suggestions that = could=20 be made.
 
    Ryan
    ryan@western.wave.ca
 
    and
 
    'Fate'
    s_79@yahoo.com
------=_NextPart_000_0038_01C0F8D9.13F6B1A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13: 2:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from citadel.simphost.com (citadel.simphost.com [216.253.163.10]) by hub.freebsd.org (Postfix) with ESMTP id 9CAE437B401; Tue, 19 Jun 2001 13:02:30 -0700 (PDT) (envelope-from jslivko@jmslivko.org) Received: by citadel.simphost.com (Postfix, from userid 1022) id 7CEAC24D05; Tue, 19 Jun 2001 16:06:27 -0400 (EDT) Received: from localhost (localhost [127.0.0.1]) by citadel.simphost.com (Postfix) with ESMTP id 68F8420F04; Tue, 19 Jun 2001 16:06:27 -0400 (EDT) Date: Tue, 19 Jun 2001 16:06:18 -0400 (EDT) From: "Jonathan M. Slivko" X-X-Sender: To: Ryan Cc: , Subject: Re: Network Strangeness In-Reply-To: <003b01c0f8fa$9b424d60$1e448d18@elysia.ca> Message-ID: <20010619160520.L15531-100000@citadel.simphost.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 [cc'd to freebsd-stable] Can you find out when you last CVSupped, as well as him? It might be a bad CVSup. -- Jonathan _____________________________________________ Jonathan M. Slivko Technical Support, Black Lotus Communications Server Administrator, AsylumNet IRC Network web: http://www.jmslivko.org/ pgp key avail. @ www.jmslivko.org/jslivko.asc - --------------------------------------------- On Tue, 19 Jun 2001, Ryan wrote: > Hello, I've been struggling with a problem for quite some time now. I'm running FreeBSD 4.3-STABLE, and the system is normal except that it will sporadically become unresponsive to the network. The system will drop all connections to it and not return any pings. I've beening running the -STABLE branch on the system for quite some time now and haven't experienced any problems until this one, and since then I've tried network cable changes, network card changes, processor changes, motherboard changes, and I've even tried using the system with OpenBSD instead, but the same problem persists. > Recently I was hanging out in the #FreeBSDhelp channel on EFnet and ran into someone experience the same problem (s_79@yahoo.com). The only similarites I can see between our configurations is that we're both running 4.3-STABLE on i586 systems. Here are the full specs on the two systems with the problem: > > Pentium 100 (i586), 32MB RAM, 1.7GB HDD > Ethernet card: SOHO NDC 10/100 (dc) > OS: FreeBSD 4.3-RELEASE > > Pentium 120 (i586), 48MB RAM, 4.2GB HDD > Ethernet card: Magitronix NE2000 Compatible (ed) > OS: FreeBSD 4.3-STABLE > > Hopefully someone out there has an idea of whats going wrong. Thanks in advance for any suggestions that could be made. > > Ryan > ryan@western.wave.ca > > and > > 'Fate' > s_79@yahoo.com > -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75 iQA/AwUBOy+wwVbZ0BAEOk7TEQKKJACghhGOuqqEf6xSba2WNYl8WtpEEREAmwYc tTGhbIgaR+px3fGWDRDZlqa1 =DRSK -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13: 6:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 1669B37B401 for ; Tue, 19 Jun 2001 13:06:51 -0700 (PDT) (envelope-from khera@kciLink.com) Received: by yertle.kciLink.com (Postfix, from userid 100) id 966472E45F; Tue, 19 Jun 2001 16:06:50 -0400 (EDT) From: Vivek Khera MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15151.45274.524738.451105@yertle.kciLink.com> Date: Tue, 19 Jun 2001 16:06:50 -0400 To: "Person, Roderick" Cc: questions@freebsd.org Subject: RE: opera & zombie processes In-Reply-To: <46AEB8C1B628D511969200508B6FE42A66840A@1upmc-msx6.isdip.upmc.edu> References: <46AEB8C1B628D511969200508B6FE42A66840A@1upmc-msx6.isdip.upmc.edu> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "RP" == Roderick Person writes: RP> If this is the cause of the problem with opera is there something else in RP> conjuction that causes this. RP> It other words linux emulation with and I have been using Opera for at RP> least 6 months and I have noticed this problem at all. I'm not using the RP> port but the tar from opera.com. Maybe it is a bug in a particular version of opera? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13:10:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailsrv.otenet.gr (mailsrv.otenet.gr [195.170.0.5]) by hub.freebsd.org (Postfix) with ESMTP id 6DB9F37B401 for ; Tue, 19 Jun 2001 13:10:52 -0700 (PDT) (envelope-from keramida@ceid.upatras.gr) Received: from hades.hell.gr (patr530-b051.otenet.gr [195.167.121.179]) by mailsrv.otenet.gr (8.11.1/8.11.1) with ESMTP id f5JKAlO16124; Tue, 19 Jun 2001 23:10:48 +0300 (EEST) Received: (from charon@localhost) by hades.hell.gr (8.11.3/8.11.3) id f5JKAjn11525; Tue, 19 Jun 2001 23:10:45 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Tue, 19 Jun 2001 23:10:44 +0300 From: Giorgos Keramidas To: j mckitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: best permissions for local CVS tree? Message-ID: <20010619231044.A11364@hades.hell.gr> References: <20010616221534.A93020@dogma.freebsd-uk.eu.org> <20010617031821.A2091@hades.hell.gr> <20010619121356.A70030@dogma.freebsd-uk.eu.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010619121356.A70030@dogma.freebsd-uk.eu.org>; from jcm@freebsd-uk.eu.org on Tue, Jun 19, 2001 at 12:13:56PM +0100 X-PGP-Fingerprint: 3A 75 52 EB F1 58 56 0D - C5 B8 21 B6 1B 5E 4A C2 X-URL: http://students.ceid.upatras.gr/~keramida/index.html Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 12:13:56PM +0100, j mckitrick wrote: > > So, do you login as ncvs when you want to update sources? Yes, my /home/ncvs contains an edited copy of /usr/share/examples/cvsup/cvs-supfile and I have ncvs account password set to '*' so I have so `su root' and then `su - ncvs' before I run: ncvs!localhost:/home/ncvs$ cvsup -g -L 2 cvs-supfile to update the /home/ncvs tree. > Also, when i run cvs, it complains about being run anywhere but /usr. How > do you get it to run in /usr/src? Oh, pardon my mistake here. I forgot to mention that when I first CVSup'ed the entire tree, I did the following: # cd /usr # /bin/rm -fr src # cvs -R -d /home/ncvs checkout -r RELENG_4 src to checkout an initial source tree of 4-STABLE. -giorgos To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13:14:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from listproc.corp.loudcloud.com (olly.loudcloud.com [66.54.20.10]) by hub.freebsd.org (Postfix) with ESMTP id CBD7E37B401 for ; Tue, 19 Jun 2001 13:14:54 -0700 (PDT) (envelope-from seanp@loudcloud.com) Received: from loudcloud.com (grover.geek.loudcloud.com [192.168.0.253]) by listproc.corp.loudcloud.com (8.11.3/8.10.1) with ESMTP id f5JKEn310264; Tue, 19 Jun 2001 13:14:50 -0700 (PDT) Message-ID: <3B2FB371.3BF0341D@loudcloud.com> Date: Tue, 19 Jun 2001 13:17:53 -0700 From: Sean Peck X-Mailer: Mozilla 4.74 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: midiostri@in.gr Cc: freebsd-questions@FreeBSD.ORG Subject: Re: X application without starting a desktop References: <1340d01c0f892$bcb70ac0$0205030a@internal.ramnet.gr> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG XVFB was created for this purpose. midiostri@in.gr wrote: > Hi, > > Is it possible to run an XWindows application without starting KDE (or Gnome etc..) ? > (Something like launching the application together with the Xserver at its minimum..) > > Thanks, > Dimitri Tsuflidis > Greece > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Garbage Collection... the bell bottoms of programming.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13:44:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sanson.reyes.somos.net (freyes.static.inch.com [216.223.199.224]) by hub.freebsd.org (Postfix) with ESMTP id B9C1F37B403 for ; Tue, 19 Jun 2001 13:44:13 -0700 (PDT) (envelope-from lists@natserv.com) Received: from zoraida.reyes.somos.net (zoraida.reyes.somos.net [192.168.10.6]) by sanson.reyes.somos.net (8.9.3/8.9.3) with ESMTP id QAA71263; Tue, 19 Jun 2001 16:44:57 -0400 (EDT) (envelope-from lists@natserv.com) Date: Tue, 19 Jun 2001 16:44:48 -0400 (EDT) From: Francisco Reyes X-X-Sender: To: Ted Mittelstaedt Cc: Francisco Reyes , FreeBSD Questions List Subject: RE: How to troubleshoot freezing? In-Reply-To: <001d01c0f570$7f0748e0$1401a8c0@tedm.placo.com> Message-ID: <20010619164117.K680-100000@zoraida.reyes.somos.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 15 Jun 2001, Ted Mittelstaedt wrote: > >-----Original Message----- > >From: owner-freebsd-questions@FreeBSD.ORG > >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Francisco Reyes > >Sent: Wednesday, June 13, 2001 2:32 PM > >To: FreeBSD Questions List > >Subject: How to troubleshoot freezing? > > > > > >I have a machine that as of 2 weeks ago has started freezing. > >I am not sure whether it is hardware or software. When it freezes nothing > >responds, not even the numlock key. After powering off startup ALWAYS > >freezes doing fsck. I have to take the drive to another > >machine to fsck. > > > > Start by opening the system up and use a can of compressed air to > _throughly_ blow out all dust from all areas including inside the power supply. Then switch > it on with the case off and make a visual confirmation that ALL fans in the > system are vigorously turning. Will try that in a few days. It was getting worse and worse so I ordered a new Motherboard, CPU and Case. Just installed them a second ago. :-) Now I have a new error. :-( ad0s1a: UDMA ICRC error reading fsbn 94560 of 47280-47407 (ad0s1 bn 94560; cn 18 tn 60 sn 60) retrying ad0s1f: UDMA ICRC error reading fsbn 8251184 of 2949016-2949079 (ad0s1 bn 8251184; cn 1637 tn 11 sn 11) retrying ad0s1f: UDMA ICRC error reading fsbn 2612352 of 129600-129663 (ad0s1 bn 2612352; cn 518 tn 25 sn 57) retrying Seems like lots of people have had this problem, but I could not find on the list of a real solution other than turning off UDMA. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13:47:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sanson.reyes.somos.net (freyes.static.inch.com [216.223.199.224]) by hub.freebsd.org (Postfix) with ESMTP id DF4A737B403 for ; Tue, 19 Jun 2001 13:47:32 -0700 (PDT) (envelope-from lists@natserv.com) Received: from zoraida.reyes.somos.net (zoraida.reyes.somos.net [192.168.10.6]) by sanson.reyes.somos.net (8.9.3/8.9.3) with ESMTP id QAA71271; Tue, 19 Jun 2001 16:47:20 -0400 (EDT) (envelope-from lists@natserv.com) Date: Tue, 19 Jun 2001 16:47:11 -0400 (EDT) From: Francisco Reyes X-X-Sender: To: Ted Mittelstaedt Cc: Francisco Reyes , , Patrick , Daniel Harris , Subject: RE: postfix && Maildir In-Reply-To: <000b01c0f56c$6c065000$1401a8c0@tedm.placo.com> Message-ID: <20010619164535.A680-100000@zoraida.reyes.somos.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 15 Jun 2001, Ted Mittelstaedt wrote: > >-----Original Message----- > >From: owner-freebsd-questions@FreeBSD.ORG > >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Francisco Reyes > >Sent: Wednesday, June 13, 2001 11:09 AM > >To: scanner@jurai.net > >Cc: Patrick; Daniel Harris; questions@FreeBSD.ORG > >Subject: Re: postfix && Maildir > > > > > >On Wed, 13 Jun 2001 scanner@jurai.net wrote: > > > > > >This is one of those near religious discussions. > >They both have issues. > >I have an old Solaris machine I am soon migratin to FreeBSD/Communigate > >Pro. One of the users had been leaving all his mails since sometime last > >year. His Mbox was 50MB+ when I discovered it. Every time he checked his > >mail, every 3 minutes, the utilization would jump to 50%+ and become > >unresponsive. > > > What your not taking into account is how incredibly much slower an old > Sparc 2 is than a modern system. It's not just the CPU that's 20 times > slower, even more importantly is how badly the Sparc 2 disk I/O is throttled > down. We are talking narrow SCSI and very few of the go-fast tricks that > exist on modern PC scsi cards, as well as the disks that shipped back then > had seek rates an order of magnitude slower. > > With a modern 1Ghz system and high speed disks the choice of mailbox format > won't impact system speed until you have thousands of them. I know it's an old machine. I inherited. :-( The new machine will be a 733 Mhz machine, but I do know that if I use mailbox many of my users will pile up their mail so i am going with maildir. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 13:51: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sanson.reyes.somos.net (freyes.static.inch.com [216.223.199.224]) by hub.freebsd.org (Postfix) with ESMTP id 5BE1A37B401 for ; Tue, 19 Jun 2001 13:50:57 -0700 (PDT) (envelope-from lists@natserv.com) Received: from zoraida.reyes.somos.net (zoraida.reyes.somos.net [192.168.10.6]) by sanson.reyes.somos.net (8.9.3/8.9.3) with ESMTP id QAA71279; Tue, 19 Jun 2001 16:51:45 -0400 (EDT) (envelope-from lists@natserv.com) Date: Tue, 19 Jun 2001 16:51:36 -0400 (EDT) From: Francisco Reyes X-X-Sender: To: Bill Moran Cc: Francisco Reyes , FreeBSD Questions List Subject: Re: How to troubleshoot freezing? In-Reply-To: <3B28BF46.88E649CA@iowna.com> Message-ID: <20010619164732.D680-100000@zoraida.reyes.somos.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 14 Jun 2001, Bill Moran wrote: > Francisco Reyes wrote: > > > > I have a machine that as of 2 weeks ago has started freezing. > > I am not sure whether it is hardware or software. When it freezes nothing > > responds, not even the numlock key. After powering off startup ALWAYS > > freezes doing fsck. I have to take the drive to another > > machine to fsck. > > Consider a backup, reformat, restore on the drive. It sounds like you > may have subtle corruption on one of the partitions ... but then agian, > why would it work on one machine and not another? Sorry for the delay. The machine kept getting worse so I ordered a new Motherboard, case and CPU. Just finished minutes ago moving the components from the old machine to the new. > Sounds like a bad mobo. Could also be a power supply. If you have > spares, try swapping. I will try to find which of the two componets where back, but at least for now I have a working machine. The upgrade was $370 with shipping + tax. Something may have gotten corrupted with the HD during all the problems. Now I am getting: ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) falling back to PIO mode To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 14: 2:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from jezebel.demon.co.uk (jezebel.demon.co.uk [158.152.38.143]) by hub.freebsd.org (Postfix) with ESMTP id B9D2337B401 for ; Tue, 19 Jun 2001 14:02:19 -0700 (PDT) (envelope-from rdls@jezebel.demon.co.uk) Received: (from rdls@localhost) by jezebel.demon.co.uk (8.11.1/8.11.1) id f5JKxNT01432; Tue, 19 Jun 2001 21:59:23 +0100 (BST) (envelope-from rdls) Date: Tue, 19 Jun 2001 21:59:23 +0100 From: Richard Smith To: Dan Armstrong Cc: freebsd-questions@freebsd.org Subject: Re: Urgent help with Reverse Lookups and FTPD Message-ID: <20010619215922.C1074@gaia.home.rdls.net> References: <3B2F74D7.C057B32F@beanfield.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3B2F74D7.C057B32F@beanfield.com>; from dan@beanfield.com on Tue, Jun 19, 2001 at 11:50:47AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 11:50:47AM -0400, Dan Armstrong wrote: > We are a small ISP, and just turned up a new webserver running Free4.3 > > Most of our customers live on private (192.168) addresses and I am > getting slaughtered with phone calls that they cannot ftp into their > sites, and it is because their ftp programs don't necessarily wait for > Free's ftpd to timeout doing the reverse lookup, for an address that of > course does not have any reverse information for it. If I add their > IP to the /etc/hosts BOOM they get in instantly. These thousands of > addresses are all dynamically assigned, so the hosts file fix is not > possible on this scale. Is there a way I can get it to stop? HELP! Just a random thought, if you made your name server authoritative for the zone "168.192.IN-ADDR.ARPA", it would fail the reverse lookup immediately. Rich. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 14:26:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from btconnex.net (mailtest.btconnex.net [209.47.192.8]) by hub.freebsd.org (Postfix) with SMTP id 6C81E37B407 for ; Tue, 19 Jun 2001 14:26:35 -0700 (PDT) (envelope-from dan@beanfield.com) Received: (qmail 23447 invoked from network); 19 Jun 2001 21:23:24 -0000 Received: from unknown (HELO beanfield.com) (192.168.66.18) by mailtest.btconnex.net with SMTP; 19 Jun 2001 21:23:24 -0000 Message-ID: <3B2FC3BB.69DA34B8@beanfield.com> Date: Tue, 19 Jun 2001 17:27:23 -0400 From: Dan Armstrong X-Mailer: Mozilla 4.76 [en] (X11; U; SunOS 5.8 sun4m) X-Accept-Language: en MIME-Version: 1.0 To: Richard Smith Cc: freebsd-questions@freebsd.org Subject: Re: Urgent help with Reverse Lookups and FTPD References: <3B2F74D7.C057B32F@beanfield.com> <20010619215922.C1074@gaia.home.rdls.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG yo SO 'da MAN! That works PERFECTLY!! Sorry, I am dancing around the room right now. I have just had a day from you know where with users calling me from all corners complaining about FTP not working. I just made one new zone 168.192.in-addr.arpa, put no hosts in it and, as you said the reverse fails immediately. I owe you a drink! (If you are ever in Toronto) :-) Dan. Richard Smith wrote: > On Tue, Jun 19, 2001 at 11:50:47AM -0400, Dan Armstrong wrote: > > We are a small ISP, and just turned up a new webserver running Free4.3 > > > > Most of our customers live on private (192.168) addresses and I am > > getting slaughtered with phone calls that they cannot ftp into their > > sites, and it is because their ftp programs don't necessarily wait for > > Free's ftpd to timeout doing the reverse lookup, for an address that of > > course does not have any reverse information for it. If I add their > > IP to the /etc/hosts BOOM they get in instantly. These thousands of > > addresses are all dynamically assigned, so the hosts file fix is not > > possible on this scale. Is there a way I can get it to stop? HELP! > > Just a random thought, if you made your name server authoritative for > the zone "168.192.IN-ADDR.ARPA", it would fail the reverse lookup > immediately. > > Rich. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 14:41:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from davids.org (davids.org [216.183.205.245]) by hub.freebsd.org (Postfix) with ESMTP id 136FB37B406 for ; Tue, 19 Jun 2001 14:41:53 -0700 (PDT) (envelope-from dlr@davids.org) Received: from localhost (dlr@localhost) by davids.org (8.11.1/8.9.3) with ESMTP id f5JL6LL33863 for ; Tue, 19 Jun 2001 14:06:25 -0700 (MST) Date: Tue, 19 Jun 2001 14:06:21 -0700 (MST) From: David Richardson To: freebsd-questions@FreeBSD.ORG Subject: Dell PERC 3/Di Support Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG All, I am trying to install 4.3 on a Dell 2500 server with an onboard PERC 3/Di controller. But the device comes back as an unknow PCI device. Vendor = 0x1028 and device = 0x0002. I looked at aac_pci.c and found the entry for the PERC 3/Di and the vendor and device numbers match the unknown device. Is the Generic Kernel in 4.3 compiled with the aac device? The documentation says it does? Is the sub-vendor, sub-device different and that is why the device is not found? Do I need to build my own boot floppy? thanks, dave | | | _| | |_ __ __o __o __o / | | '__ _`\<,_ _`\<,_ _`\<,_ - | | | (_)/ (_) (_)/ (_) (_)/ (_) \___|_|_| ________________________________________________dlr@davids.org___ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 15:47:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.cnt.ru (post.cnt.ru [212.15.122.243]) by hub.freebsd.org (Postfix) with ESMTP id 77DD537B401; Tue, 19 Jun 2001 15:47:23 -0700 (PDT) (envelope-from lucy-ples@mtu-net.ru) Received: from there (ppp2-134.dial-up.cnt.ru [212.15.118.134]) by post.cnt.ru (8.11.3/8.11.1) with SMTP id f5JMlJX21322; Wed, 20 Jun 2001 02:47:19 +0400 Message-Id: <200106192247.f5JMlJX21322@post.cnt.ru> Content-Type: text/plain; charset="koi8-r" From: Vadim Plessky Reply-To: Vadim Plessky To: doc@FreeBSD.org Subject: dead link in documentation - FONTS -> ttf2pf.ps Date: Wed, 20 Jun 2001 02:48:20 +0000 X-Mailer: KMail [version 1.2.2] Cc: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I was searching for TrueType to PostScript conversion program, and found = link=20 on this page: http://www.freebsd.org/tutorials/fonts/article.html I want to download "ttf2pf.ps" file. Unfortunately, at link pointing to it:=20 http://sunsite.icm.edu.pl/pub/GUST/contrib/BachoTeX98/ttf2pf is dead Google refers only to this location: Index of /pub/tex/GUST/contrib/BachoTeX98/ttf2pf ... Directory 06-Feb-2001 13:12 0k gs_ttf.ps 28-Mar-1998 19:58 17k pf2af= m.ps=20 27-Mar-1998 01:00 14k ttf2pf.bat 25-Apr-1998 13:17 1k ttf2pf.ps 24-Apr-1998 20:12 9k www.agh.edu.pl/pub/tex/GUST/contrib/BachoTeX98/ttf2pf/ - 2k - Cached -=20 Similar pages After some searching, I found new location for it, or it's available on=20 SourceForge: http://ttf2pt1.sourceforge.net Hope this information will be usefull for you, and you will be able to up= date=20 documentation.=20 --=20 Vadim Plessky http://kde2.newmail.ru (English) 33 Window Decorations and 6 Widget Styles for KDE http://kde2.newmail.ru/kde_themes.html Do you have Arial font installed? Just test it! http://kde2.newmail.ru/font_test_arial.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 15:51:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id ACCF037B406 for ; Tue, 19 Jun 2001 15:51:38 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id AFA3C6ACC0; Wed, 20 Jun 2001 08:21:35 +0930 (CST) Date: Wed, 20 Jun 2001 08:21:35 +0930 From: Greg Lehey To: Bill Schoolcraft Cc: FreeBSD Questions Subject: Re: digital camera [CompactFlash Card, it works!!] Message-ID: <20010620082135.I58585@wantadilla.lemis.com> References: <20010619115409.G58585@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from bill@wiliweld.com on Tue, Jun 19, 2001 at 10:07:11AM -0700 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, 19 June 2001 at 10:07:11 -0700, Bill Schoolcraft wrote: > At Tue, 19 Jun 2001 it looks like Greg Lehey composed: > >> On Monday, 18 June 2001 at 8:28:49 -0700, Bill Schoolcraft wrote: >>> At Fri, 18 May 2001 it looks like Greg Lehey composed: >>> >>> >>>> There are various things in the Ports Collection. I personally use a >>>> camera with Compact Flash memory (a Nikon CoolPix 880, which I quite >>>> like). I insert the CF card into a PCMCIA adaptor and mount it on my >>>> laptop as an MS-DOS file system. See >>>> http://echunga.lemis.com/~grog/diary-nov2000.html, 10 November 2000, >>>> for more details. >>>> >>>> Greg >>> >>> Hello Family, >>> >>> I was reading the examples at >>> http://echunga.lemis.com/~grog/diary-nov2000.html and noticed that >>> the compact flash card was mounted from /dev/ad6s1 and my devices >>> stop at /dev/ad3* >> >> Your "devices" in /dev are just files which tell userland programs how >> to access the hardware devices. You can create them or remove them at >> will. To create /dev/ad8s1, the one you want, do: >> >> # cd /dev >> # ./MAKEDEV ad8s1 >> >>> I'm using a Toshiba-1715xcds laptop. >>> >>> I'm also getting some action in /var/log/messages that's noticing >>> the card (I think) >>> >>> (each line seperated by space) >>> ########################################################### >>> Jun 18 07:14:39 laptop pccardd[52]: wi0: Lucent Technologies >>> (WaveLAN/IEEE) inserted. >>> >>> Jun 18 07:14:44 laptop pccardd[52]: Card "SunDisk"("SDP") [5/3 >>> 0.6] [(null)] matched "SunDisk" ("/.*/") [(null)] [(null)] >>> >>> Jun 18 07:14:49 laptop /kernel: ata4 at port 0x280-0x28f irq 5 >>> slot 1 on pccard1 >>> >>> Jun 18 07:14:59 laptop /kernel: ata4-master: >>> ata_command: timeout waiting for intr >>> >>> Jun 18 07:15:00 laptop /kernel: ata4-master: identify failed >>> >>> Jun 18 07:14:59 laptop pccardd[52]: ata4: SunDisk (/.*/) >>> inserted. >>> >>> Jun 18 07:14:59 laptop pccardd[52]: pccardd started >>> ########################################################## >> >> OK, this looks like irq 5 is already in use for something else. This >> is a relatively common. You need to find out which IRQs are free, and >> which don't conflict with your Orinoco card. >> >>> Now this is a triple booted laptop and I've confirmed that the >>> SanDisk, CompactFlash PC Card Holder works with Linux, >> >> Great. You're more than half way there. >> >>> Windows_ME and now the final hurdle is FreeBSD. >> >> OK, take a look at the IRQs that Linux assigns to the Orinoco and the >> CF card. You can then create or change your /etc/pccard.conf to >> include the lines (these are in /etc/defaults/pccard.conf): >> >> # Generally available IRQs (Built-in sound-card owners remove 5) >> irq 3 5 10 11 13 15 >> >> Note the comment; I don't trust it too much, but it could be the sound >> card conflicting. Change the IRQs to include only the IRQs the system >> uses in Linux. Restart pccardd. That may be all you need to do. If >> not, come back and we'll continue. > Well, that worked. I removed the irq 5, found that Linux was > giving the CompactFlash irq 9, I didn't have irq 9 in > /etc/pccard.conf as available irq's so I added it. Isn't it convenient to have another system running on the machine? > My biggest question is how did you determine /dev/ad8s1 was the > device id for that ? This message: >>> Jun 18 07:14:59 laptop pccardd[52]: ata4: SunDisk (/.*/) inserted. You've got to know the mapping between the controller (here ata4) and the IDE devices: each controller has two devices, ad(n*2) and ad(n*2+1), where n is the number of the controller. So ata4 has drives ad8 (primary) and ad9 (secondary). In this case, you only have the primary. > In looking at the /dev directory my last closest dev to the one you > suggested I use was /dev/ad3s4 then it jumped to your successful > entry of /dev/ad8s1 As I said, the contents of /dev have little to do with what's on your system. For example, you don't have a device corresponding with /dev/ad3. All that will change with devfs. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 16:10:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dell.dannyland.org (dell.dannyland.org [64.81.36.13]) by hub.freebsd.org (Postfix) with ESMTP id 8CB9C37B401 for ; Tue, 19 Jun 2001 16:10:07 -0700 (PDT) (envelope-from dannyman@toldme.com) Received: by dell.dannyland.org (Postfix, from userid 1001) id 25B4B5BF8; Tue, 19 Jun 2001 16:08:07 -0700 (PDT) Date: Tue, 19 Jun 2001 16:08:07 -0700 From: dannyman To: "Philip J. Koenig" Cc: questions@FreeBSD.ORG Subject: Re: Better printing from the command-line Message-ID: <20010619160807.C17588@toldme.com> References: <3B2B8B84.15765.5FC2FA@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3B2B8B84.15765.5FC2FA@localhost>; from pjklist@ekahuna.com on Sat, Jun 16, 2001 at 04:38:28PM -0700 X-Loop: djhoward@uiuc.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Jun 16, 2001 at 04:38:28PM -0700, Philip J. Koenig wrote: > However I'd like to do some *rudimentary* jazzing up of the > printouts, ie something as simple as setting the font to 12-pitch > instead of 10-pitch so that certain manpages and text documents > don't end up with truncated lines. enscript. Maybe mpage as well. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 16:19:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web12003.mail.yahoo.com (web12003.mail.yahoo.com [216.136.172.211]) by hub.freebsd.org (Postfix) with SMTP id CC56537B406 for ; Tue, 19 Jun 2001 16:19:47 -0700 (PDT) (envelope-from bsd2000au@yahoo.com.au) Message-ID: <20010619231947.95662.qmail@web12003.mail.yahoo.com> Received: from [203.20.237.207] by web12003.mail.yahoo.com; Wed, 20 Jun 2001 09:19:47 EST Date: Wed, 20 Jun 2001 09:19:47 +1000 (EST) From: =?iso-8859-1?q?Keith=20Spencer?= Subject: Re: how do I use mergemaster? To: Erik Trulsson Cc: fbsd In-Reply-To: <20010619074707.A50989@student.uu.se> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Erik and all, Thanks for the help. Trouble is I have chosen h but what does left right etc mean? How do I know what to do? e.g. I have changed rc.conf do I choose left right what? Unclear for me I am afraid. Thanks for your patience Keith > > m= gives me some editor I have no idea how to use > > Try pressing 'h' to get help. > > > ...hmmm > > I press default to leave to deal and it does it > for > > every file (lots) Id be here forever! > > ANY HELP IS APPRECIATED. > > I am tearing my hair out here > > Regards > > Keith > > > > -- > > Erik Trulsson > ertr1013@student.uu.se > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 16:47:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from arsc.edu (mcgrew.arsc.edu [199.165.84.136]) by hub.freebsd.org (Postfix) with ESMTP id 43C2A37B403 for ; Tue, 19 Jun 2001 16:47:33 -0700 (PDT) (envelope-from prokein@arsc.edu) Received: from werc-peter01.arsc.edu (fspp2.engr.uaf.edu [137.229.61.70]) by arsc.edu (2000-04-24.ARSC) with ESMTP id PAA70653 for ; Tue, 19 Jun 2001 15:47:23 -0800 (ADT) Message-Id: <5.1.0.14.2.20010619151635.01f6f5a0@mailhost.arsc.edu> X-Sender: prokein@mailhost.arsc.edu X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 19 Jun 2001 15:48:07 -0800 To: freebsd-questions@freebsd.org From: Peter Prokein Subject: Elsa Gladiac + XFree86 4.1.0 problem Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Folks, Let's see if I can sufficiently describe what is going on. I installed FreeBSD 4.3 using only the "User" option. Then I manually installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I ran "XFree86 -configure", went fine. XFree86Config reads that the card detected is an ELSA Gladiac MX and the driver to be used is "nv", but is also detected the card on BusID: PCI instead of AGP (not sure if it is supposed to say AGP anyway). But when I start "XFree86 -xfconfig /root/XFree86Config.new" the server sort of starts up, but then all I see is a grayish screen with a black X which has a white border (my cursor). I can move that cursor around, but that is all can do. The server responds to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down with CtrlAltBackspace no errors appear, looks like a normal shutdown (as far as I can tell). Any help will be greatly appreciated. Thanks in advance, Peter ============================================ Peter Prokein Institute for Northern Engineering University of Alaska Fairbanks 316 Skarland Hall. Fairbanks, Alaska 99775-5860 Work phone: (907) 474-2720 Fax: (907) 474-7979 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 16:49:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id A7EFD37B403 for ; Tue, 19 Jun 2001 16:49:49 -0700 (PDT) (envelope-from grog@lemis.com) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id A3AF86ACBC; Wed, 20 Jun 2001 09:19:46 +0930 (CST) Date: Wed, 20 Jun 2001 09:19:46 +0930 From: Greg Lehey To: Douglas Carmichael Cc: freebsd-questions@freebsd.org Subject: Re: When will FreeBSD subscription CDs start shipping again? Message-ID: <20010620091946.E60710@wantadilla.lemis.com> References: <009FDC19.68719645.6@mail.ourservers.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <009FDC19.68719645.6@mail.ourservers.net>; from dcarmich@mail.ourservers.net on Tue, Jun 19, 2001 at 07:24:58AM -0500 Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, 19 June 2001 at 7:24:58 -0500, Douglas Carmichael wrote: > When will FreeBSD subscription CDs start shipping again? (I have been a > subscriber since 2.2.2-RELEASE and still have not received my 4.3 CDs.) I don't know. > Also, is FreeBSD 5.0 on track for an end-of-summer release date? No. You can be sure that it won't come out this year. There will be a 4.4 release. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 16:53:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 54DA037B401 for ; Tue, 19 Jun 2001 16:53:42 -0700 (PDT) (envelope-from wmoran@iowna.com) Received: from iowna.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id f5JNoMs18856; Tue, 19 Jun 2001 19:50:22 -0400 (EDT) Message-ID: <3B2FE5CF.8ED52928@iowna.com> Date: Tue, 19 Jun 2001 19:52:47 -0400 From: Bill Moran X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: Francisco Reyes Cc: FreeBSD Questions List Subject: Re: How to troubleshoot freezing? References: <20010619164732.D680-100000@zoraida.reyes.somos.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Francisco Reyes wrote: > Something may have gotten corrupted with the HD during all the problems. > Now I am getting: > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) falling back to PIO mode This looks like something with the ata driver ... since it's dropping out of DMA mode into PIO. Waht does "sysctl hw.atamodes" reveal? If the mode for the HDD is PIO, you may have an incorrect cable. -Bill -- If a bird in the hand is worth two in the bush, then what can I get for two hands in the bush? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 17:13:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kiwi.anglictina.com (kiwi.anglictina.com [212.24.129.78]) by hub.freebsd.org (Postfix) with SMTP id 4642537B407 for ; Tue, 19 Jun 2001 17:13:16 -0700 (PDT) (envelope-from konfer@anglictina.com) Received: (qmail 95847 invoked by uid 88); 20 Jun 2001 00:13:08 -0000 Message-ID: <20010620001308.95846.qmail@kiwi.anglictina.com> From: "Admin anglictina.com" To: "freebsd-questions@FreeBSD.ORG" Subject: jakarta-tomcat port Date: Wed, 20 Jun 2001 00:13:08 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all. I have problem to run Jakarta-Tomcat on FreeBSD4.3 (Celeron 333, 128MB RAM) i'v instaled all required and dependent ports (javavmwrapper-1.1, jdk-1.1.8, pinstall-1.0) and after start of tomcat it goes wrong with this message.. ------ platan# /usr/local/etc/rc.d/tomcat.sh start tomcat platan# SIGSEGV 11* segmentation violation Full thread dump: Monitor Cache Dump: Registered Monitor Dump: Monitor IO lock: Child death monitor: Event monitor: I/O monitor: Alarm monitor: Memory allocation lock: Monitor registry: Thread Alarm Q: Jun 18 23:45:00 platan /kernel: pid 1241 (java), uid 0: exited on signal 6 (core dumped) -------- Where is the problem, do i need to setup anything else ? or maybe i forgot to setup something after installing ports? Thanks for help. Jiri. jmikulas@anglictina.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 17:34: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts5-srv.bellnexxia.net (tomts5.bellnexxia.net [209.226.175.25]) by hub.freebsd.org (Postfix) with ESMTP id BAD6F37B401 for ; Tue, 19 Jun 2001 17:34:00 -0700 (PDT) (envelope-from matt@gsicomp.on.ca) Received: from xena.gsicomp.on.ca ([64.228.154.141]) by tomts5-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20010620003359.LUKO17517.tomts5-srv.bellnexxia.net@xena.gsicomp.on.ca>; Tue, 19 Jun 2001 20:33:59 -0400 Received: from hermes (hermes.gsicomp.on.ca [192.168.0.18]) by xena.gsicomp.on.ca (8.11.1/8.11.1) with SMTP id f5K0VNN78112; Tue, 19 Jun 2001 20:31:23 -0400 (EDT) (envelope-from matt@gsicomp.on.ca) Message-ID: <025301c0f91f$caff1130$1200a8c0@gsicomp.on.ca> From: "Matthew Emmerton" To: "shailesh sheoran" Cc: "FreeBSD-Questions" References: Subject: Re: d-link 530TX + cards still dysfunctional Date: Tue, 19 Jun 2001 20:27:30 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > HI guys, > thanks so much for all the information. i am using the D Revision > of the card, with the picture of a family on the front. > has anyone had any success with revision D? is it supported in 4.3 > - CURRENT? It is, but I don't think you need to take the drastic measure of running -CURRENT :) If you want, you can patch your rl driver and rebuild your kernel. The patch is about 10 lines, and is pretty simple. See PR kern/25640 (http://www.freebsd.org/cgi/query-pr.cgi?pr=25640) for the patch. -- Matt Emmerton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 17:44:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.ca.inter.net (smtp.ca.inter.net [38.210.35.210]) by hub.freebsd.org (Postfix) with ESMTP id 24F9E37B401 for ; Tue, 19 Jun 2001 17:44:49 -0700 (PDT) (envelope-from cckok00@hotmail.com) Received: from ip178.toronto101.dialup.canada.psi.net ([154.20.95.178] helo=hotmail.com) by smtp.ca.inter.net with esmtp (Exim 3.22 #1) id 15CW6w-0006Gp-00 for freebsd-questions@FreeBSD.ORG; Tue, 19 Jun 2001 20:44:47 -0400 Message-ID: <3B2FF22A.6938B552@hotmail.com> Date: Tue, 19 Jun 2001 20:45:30 -0400 From: Peter Kok X-Mailer: Mozilla 4.74 [en] (Win98; U) X-Accept-Language: en,zh-TW,zh-CN MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: free chat server Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all Do you know where I can get free chat server like MSN? Tks much regards Peter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 17:47:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id 9E79F37B401 for ; Tue, 19 Jun 2001 17:47:41 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 19571 invoked by uid 202); 20 Jun 2001 00:47:36 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 20 Jun 2001 00:47:36 -0000 Message-Id: <5.1.0.14.2.20010620023743.0434e6b8@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 20 Jun 2001 02:55:43 +0200 To: freebsd-questions@freebsd.org From: Cynic Subject: whereis dumps core Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG anyone knows why $subject should be happening? it doesn't crash with every search, but if it fails once with a lookup for a certain file, if fails with it always. as you can see below, whereis whereis is fine, whereis bash crashes. I should note that I noticed it 10 minutes ago. I don't think it was happening before, but it just might: one of my colleagues turned the plug off this machine couple of hours ago... but fsck went fine... so? [cynic /]$ uname -a FreeBSD freepuppy.infosite.cz 4.3-RELEASE FreeBSD 4.3-RELEASE #3: Thu Jun 14 14:18:03 CEST 2001 cynic@freepuppy.local:/usr/src/sys/compile/FREEPUPPY i386 [cynic /]$ whereis bash Segmentation fault bash: /usr/local/bin/bash /usr/local/man/man1/bash.1.gz [cynic /]$ whereis whereis whereis: /usr/bin/whereis /usr/share/man/man1/whereis.1.gz /usr/src/usr.bin/whereis [cynic /]$ whereis apxs Segmentation fault apxs: /usr/local/sbin/apxs /usr/local/man/man8/apxs.8.gz [cynic /]$ whereis bash Segmentation fault bash: /usr/local/bin/bash /usr/local/man/man1/bash.1.gz [cynic /]$ whereis whereis whereis: /usr/bin/whereis /usr/share/man/man1/whereis.1.gz /usr/src/usr.bin/whereis ummm... looks like the FreeBSD whereis is actually a perl script, so it's perl that is dumping core. I haven't touched perl on this machine, but just in case: [cynic /]$ perl -V Summary of my perl5 (5.0 patchlevel 5 subversion 3) configuration: Platform: osname=freebsd, osvers=4.0-current, archname=i386-freebsd uname='FreeBSD freefall.FreeBSD.org 4.0-current FreeBSD 4.0-current #0: $Date$' hint=recommended, useposix=true, d_sigaction=define usethreads=undef useperlio=undef d_sfio=undef Compiler: cc='cc', optimize='undef', gccversion=2.95.2 19991024 (release) cppflags='' ccflags ='' stdchar='char', d_stdstdio=undef, usevfork=true intsize=4, longsize=4, ptrsize=4, doublesize=8 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 alignbytes=4, usemymalloc=n, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E -lperl -lm ' libpth=/usr/lib libs=-lm -lc -lcrypt libc=, so=so, useshrplib=true, libperl=libperl.so.3 Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/lib' cccdlflags='-DPIC -fpic', lddlflags='-Wl,-E -shared -lperl -lm ' Characteristics of this binary (from libperl): Built under freebsd Compiled at Apr 21 2001 08:25:58 @INC: /usr/libdata/perl/5.00503/mach /usr/libdata/perl/5.00503 /usr/local/lib/perl5/site_perl/5.005/i386-freebsd /usr/local/lib/perl5/site_perl/5.005 . cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 17:55: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rye.elite.net (rye.elite.net [205.199.220.6]) by hub.freebsd.org (Postfix) with ESMTP id 092FA37B403 for ; Tue, 19 Jun 2001 17:55:01 -0700 (PDT) (envelope-from nate@elite.net) Received: from almond.elite.net (root@almond.elite.net [205.199.220.5]) by rye.elite.net (8.9.3/8.9.3) with ESMTP id RAA98790 for ; Tue, 19 Jun 2001 17:55:00 -0700 (PDT) Received: (nate@localhost) by almond.elite.net (8.8.3/8.6.12) id RAA15773; Tue, 19 Jun 2001 17:55:00 -0700 (PDT) Date: Tue, 19 Jun 2001 17:55:00 -0700 (PDT) From: Nate Lawson To: freebsd-questions@freebsd.org Subject: GDB remote not working Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am working on debugging a FreeBSD target (snap 20010531) from a VMware FreeBSD 4.3R host. I am able to debug the same target machine booted into Linux + kgdb from a VMware Linux host just fine. I set up the FreeBSD kernel with options DDB and flags 0x80 on sio0 but whenever I do "target remote", it never connects to the target. Just to be sure the serial was still working, I had the target run a getty on ttyd0 and was able to cu into it from the host. I've tried both boot -d/gdb/s and CTRL-ALT-ESC/gdb/s after booted with the same result. I've also tried various combinations of CONSPEED/remotebaud. Finally, I did a boot -h and the host worked as a serial console just fine. I set remotedebug to see what was going on and it looks like the target is not getting or responding to any messages from the host: --- Sending packet: $Hc-1#09...Sending packet: $Hc-1#09...Sending packet: $Hc-1#09...Sending packet: $Hc-1#09... Timed out. Ignoring packet error, continuing... (Same for $qC#b4) (Same for $qOffsets#4b) Malformed response to offset query, timeout --- Thanks for any help, -Nate gdb commands: file kernel.debug set remotebreak 1 set remotedebug 1 set remotebaud 9600 target remote /dev/cuaa0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 18:17:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailsrv.otenet.gr (mailsrv.otenet.gr [195.170.0.5]) by hub.freebsd.org (Postfix) with ESMTP id 8A58637B403 for ; Tue, 19 Jun 2001 18:17:47 -0700 (PDT) (envelope-from keramida@ceid.upatras.gr) Received: from hades.hell.gr (patr530-a231.otenet.gr [212.205.215.231]) by mailsrv.otenet.gr (8.11.1/8.11.1) with ESMTP id f5K1HdO13353; Wed, 20 Jun 2001 04:17:44 +0300 (EEST) Received: (from charon@localhost) by hades.hell.gr (8.11.3/8.11.3) id f5K1Hag73216; Wed, 20 Jun 2001 04:17:36 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Wed, 20 Jun 2001 04:17:34 +0300 From: Giorgos Keramidas To: Peter Kok Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: free chat server Message-ID: <20010620041733.B64201@hades.hell.gr> References: <3B2FF22A.6938B552@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3B2FF22A.6938B552@hotmail.com>; from cckok00@hotmail.com on Tue, Jun 19, 2001 at 08:45:30PM -0400 X-PGP-Fingerprint: 3A 75 52 EB F1 58 56 0D - C5 B8 21 B6 1B 5E 4A C2 X-URL: http://students.ceid.upatras.gr/~keramida/index.html Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 08:45:30PM -0400, Peter Kok wrote: > Hi all > > Do you know where I can get free chat server like MSN? You can install an IRC server of your own and use it as a replacement of the chat server you were using in MSN. Links to information on the software used in a few of the largest IRC networksk today are listed below: + Undernet uses `ircu' < http://coder-com.undernet.org/ > + DALnet uses `bahamut' < http://bahamut.dal.net > + EFnet uses `hybrid' < http://www.efnet.org/archive/servers/hybrid/ > Grab yourself the copy and documentation given with one of these servers, read the documentation, install the program, and you're ready to go :) You can also find lots of useful links and documents on setting up an IRC server in the documentation pages of the networks I referred to above: http://www.user-com.undernet.org/documents/ http://help.dal.net/docs/ http://www.efnet.org/docs.html Ciao :) -giorgos To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 18:32: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from h24-67-61-12.lb.shawcable.net (h24-67-61-12.lb.shawcable.net [24.67.61.12]) by hub.freebsd.org (Postfix) with ESMTP id ABAB437B403 for ; Tue, 19 Jun 2001 18:32:06 -0700 (PDT) (envelope-from chris@home.com) Received: by h24-67-61-12.lb.shawcable.net (Postfix, from userid 1002) id C2C3A66B00E; Tue, 19 Jun 2001 19:24:37 -0600 (MDT) Date: Tue, 19 Jun 2001 19:24:37 -0600 From: Chris Moline To: questions@freebsd.org Subject: Re: Elsa Gladiac + XFree86 4.1.0 problem Message-ID: <20010619192437.B2091@h24-67-61-12.lb.shawcable.net> References: <5.1.0.14.2.20010619151635.01f6f5a0@mailhost.arsc.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <5.1.0.14.2.20010619151635.01f6f5a0@mailhost.arsc.edu>; from prokein@arsc.edu on Tue, Jun 19, 2001 at 03:48:07PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Jun 19, 2001 at 03:48:07PM -0800, Peter Prokein wrote: > Folks, > > Let's see if I can sufficiently describe what is going on. I > installed FreeBSD 4.3 using only the "User" option. Then I manually > installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I ran > "XFree86 -configure", went fine. XFree86Config reads that the card detected > is an ELSA Gladiac MX and the driver to be used is "nv", but is also > detected the card on BusID: PCI instead of AGP (not sure if it is supposed > to say AGP anyway). But when I start "XFree86 -xfconfig > /root/XFree86Config.new" the server sort of starts up, but then all I see > is a grayish screen with a black X which has a white border (my cursor). I > can move that cursor around, but that is all can do. The server responds > to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down > with CtrlAltBackspace no errors appear, looks like a normal shutdown (as > far as I can tell). Have you got a window manager?? Sincerly, Chris Moline To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 18:34:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.mrf.mail.rcn.net (smtp02.mrf.mail.rcn.net [207.172.4.61]) by hub.freebsd.org (Postfix) with ESMTP id 6E9D937B406 for ; Tue, 19 Jun 2001 18:34:14 -0700 (PDT) (envelope-from rjhalljr@starpower.net) Received: from 66-44-67-120.s374.tnt7.lnhva.md.dialup.rcn.com ([66.44.67.120]) by smtp02.mrf.mail.rcn.net with esmtp (Exim 3.16 #6) id 15CWsn-0007LZ-00 for freebsd-questions@freebsd.org; Tue, 19 Jun 2001 21:34:13 -0400 Mime-Version: 1.0 X-Sender: rjhalljr@pop.starpower.net (Unverified) Message-Id: Date: Tue, 19 Jun 2001 21:34:09 -0400 To: freebsd-questions@freebsd.org From: Bob Hall Subject: Getting sio2 to work Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've got a Gateway Pentium II with a Promise Ultra100 controller. When I installed the modem, under Win95, it got installed on COM3. I've recently installed FreeBSD 4.3 on another partition. I've been trying to set up PPP so that I can connect to my ISP. Since sio2=COM3 is disabled under the GENERIC kernel, this doesn't work. I compiled a new kernal in which I made only the following changes. 1) eliminated all cpus except I686_CPU 2) changed ident from GENERIC to STAUNTON 3) enabled sio2 with the line device sio2 at isa? port IO_COM3 irq 5 In other words, I removed the word 'disable' from the above line. The resulting kernel runs fine, but I still can't use the modem. Entering 'dmesg | grep sio2' returns sio2: configured irq 5 not in bitmap of probed irqs 0 Entering 'stty -f /dev/cuaa2 -a' returns stty: /dev/cuaa2: Device not configured I've read everything I can find on modems in 'The Complete FreeBSD' by Greg Lehey 3rd edition, and all the FAQs, tutorial, and handbook articles that I can find on the FreeBSD web site. Any help you can give me will be appreciated. TIA, Bob Hall Know thyself? Absurd direction! Bubbles bear no introspection. -Khushhal Khan Khatak MySQL list magic words: sql query database To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 18:37:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from infofreebsd.org (dsl-64-193-145-21.telocity.com [64.193.145.21]) by hub.freebsd.org (Postfix) with ESMTP id 0CF2A37B403 for ; Tue, 19 Jun 2001 18:37:22 -0700 (PDT) (envelope-from herlan_b@infofreebsd.org) Received: from localhost (herlan_b@localhost) by infofreebsd.org (8.11.4/8.11.3) with ESMTP id f5K1acr01666; Tue, 19 Jun 2001 21:36:38 -0400 (EDT) (envelope-from herlan_b@infofreebsd.org) Date: Tue, 19 Jun 2001 21:36:37 -0400 (EDT) From: herlan To: Andrey Simonenko Cc: Subject: Re: Does fxp driver work in FreeBSD 4.3-STABLE? In-Reply-To: <20010616195251.Q28321-100000@lion.com.ua> Message-ID: <20010619213503.T1601-100000@infofreebsd.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 16 Jun 2001, Andrey Simonenko wrote: > Hi All, > > I've got Intel motherboard and two Intel Ethernet cards: > > fxp0: port 0x1060-0x107f mem 0xfa000000-0xfa0fffff,0xfa204000-0xfa204fff irq 11 at device 11.0 on pci0 > fxp1: port 0x1080-0x109f mem 0xfa100000-0xfa1fffff,0xfa205000-0xfa205fff irq 5 at device 15.0 on pci0 > > Currently my server runs FreeBSD 4.2-STABLE, I'm going to upgrade it to > 4.3-STABLE. I read some information about fxp driver in /usr/src/UPDATING. > So, here is my question. Does fxp driver work in 4.3-STABLE and do my > Ethernet cards work with fxp driver on 4.3-STABLE? > > Thanks for your help. yes, i use intel ethernetcard in freebsd 4.3 stable it works fine to me http://www.infofreebsd.org FreeBSD User Group in Indonesia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 18:40:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.noos.fr (claudel.noos.net [212.198.2.83]) by hub.freebsd.org (Postfix) with ESMTP id 8BC0B37B401 for ; Tue, 19 Jun 2001 18:40:36 -0700 (PDT) (envelope-from eam75@hotmail.com) Received: (qmail 6371915 invoked by uid 0); 20 Jun 2001 01:40:34 -0000 Received: from unknown (HELO hotmail.com) ([212.198.123.40]) (envelope-sender ) by 212.198.2.83 (qmail-ldap-1.03) with SMTP for ; 20 Jun 2001 01:40:34 -0000 Message-ID: <109262001632013832470@hotmail.com> X-EM-Version: 5, 0, 0, 21 X-EM-Registration: #01B0530810E603002D00 X-Priority: 3 Reply-To: eam75@hotmail.com X-MSMail-Priority: Normal From: "Business News" To: freebsd-questions@freebsd.org Subject: Save up to 80% on long distance calls from 220 countries. Date: Wed, 20 Jun 2001 03:38:32 +0200 MIME-Version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Save up to 80% on your international calling from 220 countries=2E=20 Use your phone, fax or cellular=2E=20 You can also monitor your usages online 24/24 - 7/7=2E No connection fees, no risk ! Free sign up at : http://www=2Ecallback=2E20m=2Ecom This mail has been sent in accordance with the pending Anti-Spam law Unsolicited Electronic Mail Act of 2000 (H=2ER=2E 3113)=2E Should you wis= h to be removed from this mailing list, please send an e-mail with Remove in the subject line to : eam75@hotmail=2Ecom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 19:59: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 73C1537B403 for ; Tue, 19 Jun 2001 19:58:57 -0700 (PDT) (envelope-from jcm@freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97] ident=root) by serenity.mcc.ac.uk with esmtp (Exim 2.05 #6) id 15CYCm-000NfL-00; Wed, 20 Jun 2001 03:58:56 +0100 Received: (from jcm@localhost) by dogma.freebsd-uk.eu.org (8.11.3/8.11.1) id f5K2wt388768; Wed, 20 Jun 2001 03:58:55 +0100 (BST) (envelope-from jcm) Date: Wed, 20 Jun 2001 03:58:55 +0100 From: j mckitrick To: Giorgos Keramidas Cc: freebsd-questions@FreeBSD.ORG Subject: Re: best permissions for local CVS tree? Message-ID: <20010620035855.A88677@dogma.freebsd-uk.eu.org> References: <20010616221534.A93020@dogma.freebsd-uk.eu.org> <20010617031821.A2091@hades.hell.gr> <20010619121356.A70030@dogma.freebsd-uk.eu.org> <20010619231044.A11364@hades.hell.gr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20010619231044.A11364@hades.hell.gr>; from keramida@ceid.upatras.gr on Tue, Jun 19, 2001 at 11:10:44PM +0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Here is a new problem. I have the CVS repo in /home/ncvs. I cvsupped it with NO TAGS, so the ,v files all show HEAD revisions. I now want to get the -current version of ONE file. cvs -R checkout -A src/sys/isa/ppcreg.h and cvs -R checkout -f src/sys/isa/ppcreg.h both get non-current revisions. rm /sys/isa/ppcreg.h then repeat the above commands gets a newer version of the code, but one less than the most recent revision. If i ask for 1.33, i get 1.32. If i ask for 1.14, i get 1.13. What am i doing wrong? Jonathon -- "It is through will alone I set my mind in motion...." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20: 1:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ntmail1.gamespy.com (mail.planetcnc.com [207.199.1.59]) by hub.freebsd.org (Postfix) with ESMTP id C0F5137B403 for ; Tue, 19 Jun 2001 20:01:17 -0700 (PDT) (envelope-from degraz@planethalflife.com) Received: from [206.68.132.129] by ntmail1.contaminated.net (NTMail 5.01.0003/AX0191.00.816c0654) with ESMTP id nxdnbeaa for freebsd-questions@FreeBSD.ORG; Tue, 19 Jun 2001 19:50:19 -0700 From: "Travis Troyer" To: Subject: Modem Suggestions For FreeBSD 4.1 Date: Tue, 19 Jun 2001 22:56:05 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am FreeBSD newbie, building a new system, and I'm planning on running FreeBSD 4.1 on it (eventually I'll get the newer release, but right now 4.1 is what I have). I am a dial-up user, and I'm wondering what modem would be a good choice for my system? If a modem is listed as working with Linux, will it easily work with FreeBSD too? Specifically, I have been looking at the USR 56K Performance Pro (http://www.usr.com/products/home/home-product.asp?sku=3CP5610A) and the Intel Modems with the MD563X-HaM chipset (http://developer.intel.com/design/modems/products/md563x.htm). Would either of these work well with FreeBSD? Any insight on what modems to look for would be appreciated... Thanks, Travis Troyer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:15:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11902.mail.yahoo.com (web11902.mail.yahoo.com [216.136.172.186]) by hub.freebsd.org (Postfix) with SMTP id 5F03B37B403 for ; Tue, 19 Jun 2001 20:15:12 -0700 (PDT) (envelope-from h4rris_99@yahoo.com) Message-ID: <20010620031512.12279.qmail@web11902.mail.yahoo.com> Received: from [202.159.33.210] by web11902.mail.yahoo.com; Tue, 19 Jun 2001 20:15:12 PDT Date: Tue, 19 Jun 2001 20:15:12 -0700 (PDT) From: richard harris Subject: i can't join To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi.. i want to joint milist (freebsd-security) but ican't to come.. i don't know what's the problem.. please help me __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:31:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.mail.pas.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 8CE2637B401 for ; Tue, 19 Jun 2001 20:31:13 -0700 (PDT) (envelope-from cublai@earthlink.net) Received: from earthlink.net (1Cust90.tnt2.longmont.co.da.uu.net [63.29.62.90]) by snipe.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id UAA00682; Tue, 19 Jun 2001 20:31:08 -0700 (PDT) Received: (from cublai@localhost) by earthlink.net (8.11.4/8.11.3) id f5K3UsK62477; Tue, 19 Jun 2001 21:30:54 -0600 (MDT) (envelope-from cublai) Date: Tue, 19 Jun 2001 21:30:54 -0600 From: Zach Thomspon To: Travis Troyer Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Modem Suggestions For FreeBSD 4.1 Message-ID: <20010619213054.A62423@nero> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from degraz@planethalflife.com on Tue, Jun 19, 2001 at 10:56:05PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Travis Troyer [010619 21:14]: > I am a dial-up user, and I'm wondering what modem would be > a good choice for my system? I am using a USR 56k OfficeConnect. Worked like a champ immediately with no hassle. zach thompson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:43:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from my.usask.ca (my.usask.ca [128.233.65.7]) by hub.freebsd.org (Postfix) with ESMTP id 6B74437B403 for ; Tue, 19 Jun 2001 20:43:50 -0700 (PDT) (envelope-from kek971@mail.usask.ca) Received: (from nobody@localhost) by my.usask.ca (8.11.0/8.11.0) id f5K3hmT27910 for freebsd-questions@FreeBSD.org; Tue, 19 Jun 2001 21:43:48 -0600 To: Subject: sendmail??? Message-ID: <993008628.3b301bf416284@my.usask.ca> Date: Tue, 19 Jun 2001 21:43:48 -0600 (CST) From: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 2.3.6-cvs X-WebMail-Service: My.USask.CA X-Originating-IP: 128.233.134.101 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG whenever i login a console, i got a message"you have a mail"..even if i removed "sendmail".... How can i get rid of this? or where should i check out? Thank you in advance... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:43:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web5301.mail.yahoo.com (web5301.mail.yahoo.com [216.115.106.110]) by hub.freebsd.org (Postfix) with SMTP id C06F337B401 for ; Tue, 19 Jun 2001 20:43:49 -0700 (PDT) (envelope-from kf7nn@yahoo.com) Message-ID: <20010620034349.12820.qmail@web5301.mail.yahoo.com> Received: from [148.71.111.158] by web5301.mail.yahoo.com; Tue, 19 Jun 2001 20:43:49 PDT Date: Tue, 19 Jun 2001 20:43:49 -0700 (PDT) From: george vagner Subject: rpc program not registered To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have 2 freebsd boxes on a private subnet and am trying to mount one of them with the other. i try mount_nfs 192.168.0.4:/storage /storage and I get this back thunderbird# mount_nfs 192.168.0.3:/storage /storage Cannot MNT RPC: RPC: Program not registered the box i am trying to mount is a 4.3-stable machine from about a month ago and the client was cvsupped about 3 days ago or so and made world. I had seen many references to the error i am getting but no solutions. nfsd is running on the server mountd is running on the server portmap is running on the client and server nfsiod is running on the client. I am just trying to make one simple connection but this error is in my way and i nhavent used nfs all too much so i am green on nfs. where do i look help __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:47:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from my.usask.ca (my.usask.ca [128.233.65.7]) by hub.freebsd.org (Postfix) with ESMTP id CF0E037B401 for ; Tue, 19 Jun 2001 20:47:46 -0700 (PDT) (envelope-from kek971@mail.usask.ca) Received: (from nobody@localhost) by my.usask.ca (8.11.0/8.11.0) id f5K3lkQ27939 for freebsd-questions@FreeBSD.org; Tue, 19 Jun 2001 21:47:46 -0600 To: Subject: customizing console?? Message-ID: <993008866.3b301ce25b0ab@my.usask.ca> Date: Tue, 19 Jun 2001 21:47:46 -0600 (CST) From: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 2.3.6-cvs X-WebMail-Service: My.USask.CA X-Originating-IP: 128.233.134.101 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i'm using csh... how can i set up a prompt showing the current directory? Anyone tell me some good internet resources about configuring console??? Thank you in advance... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:50: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.mail.pas.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 7802337B403 for ; Tue, 19 Jun 2001 20:49:58 -0700 (PDT) (envelope-from B-Morgan@concentric.net) Received: from cos80474 (cpe-24-221-198-127.co.sprintbbd.net [24.221.198.127]) by falcon.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id UAA11581 for ; Tue, 19 Jun 2001 20:49:56 -0700 (PDT) From: "Brad Morgan" To: Subject: RE: Elsa Gladiac + XFree86 4.1.0 problem Date: Tue, 19 Jun 2001 21:49:56 -0600 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <5.1.0.14.2.20010619151635.01f6f5a0@mailhost.arsc.edu> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Having just done the same thing I can suggest two things... First, you need a window manager. The command to start it goes in .xinitrc (no & on the last line). I used KDE. Second, my XFree86 -configure output didn't include commands for the monitor HorizSync and VertRefresh nor did it include any display modes so first I got a 640x480 desktop and then (after first fixing the sync and refresh rates) I got a 1900x1400 (or so) desktop. Try reading text on that one! Using xf86cfg didn't work (core dump), xf86config doesn't have GeForce 2 listed so I ended up manually editing the XF86Config file. Regards, Brad -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Peter Prokein Sent: Tuesday, June 19, 2001 5:48 PM To: freebsd-questions@FreeBSD.ORG Subject: Elsa Gladiac + XFree86 4.1.0 problem Folks, Let's see if I can sufficiently describe what is going on. I installed FreeBSD 4.3 using only the "User" option. Then I manually installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I ran "XFree86 -configure", went fine. XFree86Config reads that the card detected is an ELSA Gladiac MX and the driver to be used is "nv", but is also detected the card on BusID: PCI instead of AGP (not sure if it is supposed to say AGP anyway). But when I start "XFree86 -xfconfig /root/XFree86Config.new" the server sort of starts up, but then all I see is a grayish screen with a black X which has a white border (my cursor). I can move that cursor around, but that is all can do. The server responds to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down with CtrlAltBackspace no errors appear, looks like a normal shutdown (as far as I can tell). Any help will be greatly appreciated. Thanks in advance, Peter ============================================ Peter Prokein Institute for Northern Engineering University of Alaska Fairbanks 316 Skarland Hall. Fairbanks, Alaska 99775-5860 Work phone: (907) 474-2720 Fax: (907) 474-7979 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 20:54:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fedde.littleton.co.us (cfedde.dsl.frii.net [216.17.139.141]) by hub.freebsd.org (Postfix) with ESMTP id BB8CB37B401 for ; Tue, 19 Jun 2001 20:54:10 -0700 (PDT) (envelope-from cfedde@fedde.littleton.co.us) Received: from fedde.littleton.co.us (localhost [127.0.0.1]) by fedde.littleton.co.us (8.11.4/8.11.2) with ESMTP id f5K3s8400768; Tue, 19 Jun 2001 21:54:08 -0600 (MDT) Message-Id: <200106200354.f5K3s8400768@fedde.littleton.co.us> To: "Anand Franklin J" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: serial communication tip problem!!! In-Reply-To: From: Chris Fedde Date: Tue, 19 Jun 2001 21:54:07 -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 19 Jun 2001 07:24:24 -0000 "Anand Franklin J" wrote: +------------------ | Hi!! | I have a problem in the serial communication using the tip command. | I have given proper entry in /etc/ttys, /etc/gettytab and /etc/remote. | still, when | i give the command "tip cuaa0c" it just says "connected" | and hangs. the login prompt doesnot occurs. I varified the log file, | it says completed and terminated. Is there any more setting to be done, | if so please do mail me. with regard's | franklin. +------------------ What is the serial device you are talking to. Do you have the cabling right? A few more details might help us figure this out. -- Chris Fedde To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21: 1:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.mail.pas.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 775FB37B403 for ; Tue, 19 Jun 2001 21:01:04 -0700 (PDT) (envelope-from B-Morgan@concentric.net) Received: from cos80474 (cpe-24-221-198-127.co.sprintbbd.net [24.221.198.127]) by falcon.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id VAA28612 for ; Tue, 19 Jun 2001 21:01:01 -0700 (PDT) From: "Brad Morgan" To: Subject: Linux and FreeBSD filesystem sharing. Date: Tue, 19 Jun 2001 22:01:00 -0600 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I finally got my DELL 4100 (933MHz P-III) running FreeBSD well enough to start working on my project of porting some Linux software to FreeBSD. I have Windows ME on one IDE disk, Linux on a second IDE disk, and FreeBSD on a SCSI disk. I've figured out how to mount the Windows partitions under FreeBSD but what I really want to do is mount the Linux ext2 partition(s) so that I can keep the software I'm porting in one spot. Is this possible? I see some hints in the documentation that it might be, but I don't seem to have the right software loaded or the right "magic" commands to make it work. If its possible can someone give me some pointers? Thanks, Brad -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Brad Morgan Sent: Tuesday, June 19, 2001 9:50 PM To: freebsd-questions@FreeBSD.ORG Subject: RE: Elsa Gladiac + XFree86 4.1.0 problem Having just done the same thing I can suggest two things... First, you need a window manager. The command to start it goes in .xinitrc (no & on the last line). I used KDE. Second, my XFree86 -configure output didn't include commands for the monitor HorizSync and VertRefresh nor did it include any display modes so first I got a 640x480 desktop and then (after first fixing the sync and refresh rates) I got a 1900x1400 (or so) desktop. Try reading text on that one! Using xf86cfg didn't work (core dump), xf86config doesn't have GeForce 2 listed so I ended up manually editing the XF86Config file. Regards, Brad -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Peter Prokein Sent: Tuesday, June 19, 2001 5:48 PM To: freebsd-questions@FreeBSD.ORG Subject: Elsa Gladiac + XFree86 4.1.0 problem Folks, Let's see if I can sufficiently describe what is going on. I installed FreeBSD 4.3 using only the "User" option. Then I manually installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I ran "XFree86 -configure", went fine. XFree86Config reads that the card detected is an ELSA Gladiac MX and the driver to be used is "nv", but is also detected the card on BusID: PCI instead of AGP (not sure if it is supposed to say AGP anyway). But when I start "XFree86 -xfconfig /root/XFree86Config.new" the server sort of starts up, but then all I see is a grayish screen with a black X which has a white border (my cursor). I can move that cursor around, but that is all can do. The server responds to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down with CtrlAltBackspace no errors appear, looks like a normal shutdown (as far as I can tell). Any help will be greatly appreciated. Thanks in advance, Peter ============================================ Peter Prokein Institute for Northern Engineering University of Alaska Fairbanks 316 Skarland Hall. Fairbanks, Alaska 99775-5860 Work phone: (907) 474-2720 Fax: (907) 474-7979 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21: 5:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id 1F0D737B403 for ; Tue, 19 Jun 2001 21:05:36 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 3613 invoked by uid 202); 20 Jun 2001 04:05:34 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 20 Jun 2001 04:05:34 -0000 Message-Id: <5.1.0.14.2.20010620060609.04344870@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 20 Jun 2001 06:13:45 +0200 To: freebsd-questions@freebsd.org From: Cynic Subject: make.conf question Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi there, I'm going to make world for the first time, and would like to know if those of you who have some experience with it consider this make.conf a sane one. Specifically: Is the fortran and objc support needed? Are any parts of FreeBSD written in these languages? Do you know of any ports that are written in them? How much space will the files take? and: Should I include COMPAT options for releases older than 3X? CPUTYPE=i686 CFLAGS= -O -pipe CXXFLAGS+= -fmemoize-lookups -fsave-memoized INSTALL=install -C NO_FORTRAN= true # do not build g77 and related libraries NO_LPR= true # do not build lpr and related programs NO_OBJC= true # do not build Objective C support NOGAMES= true # do not build games (games/ subdir) WANT_OPENSSL_MANPAGES= true COMPAT3X= yes COMPAT4X= yes PRINTERDEVICE= ascii BOOTWAIT=5000 SUP_UPDATE= yes SUP= /usr/local/bin/cvsup SUPFLAGS= -g -L 2 SUPHOST= cvsup.cz.FreeBSD.org SUPFILE= /usr/sup/sup-files/stable-supfile SUPFILE1= /usr/sup/sup-files/secure-supfile PORTSSUPFILE= /usr/sup/sup-files/ports-supfile DOCSUPFILE= /usr/sup/sup-files/doc-supfile DOC_LANG= en_US.ISO_8859-1 cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21: 8:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id BDEFA37B401 for ; Tue, 19 Jun 2001 21:08:44 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5K48g009186; Wed, 20 Jun 2001 00:08:42 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Wed, 20 Jun 2001 00:08:42 -0400 (EDT) From: Joe Clarke To: Brad Morgan Cc: Subject: Re: Linux and FreeBSD filesystem sharing. In-Reply-To: Message-ID: <20010620000628.K9098-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG From LINT: # # Add support for the EXT2FS filesystem of Linux fame. Be a bit # careful with this - the ext2fs code has a tendency to lag behind # changes and not be exercised very much, so mounting read/write could # be dangerous (and even mounting read only could result in panics.) # options EXT2FS So it involves a kernel rebuild. I've done this once so I could recover a Linux box for a friend that deleted libc ;-), so it does work. However, that was about a year and a half ago. I'm not sure how EXT2FS has evolved. Joe Clarke On Tue, 19 Jun 2001, Brad Morgan wrote: > I finally got my DELL 4100 (933MHz P-III) running FreeBSD well enough to > start working on my project of porting some Linux software to FreeBSD. > > I have Windows ME on one IDE disk, Linux on a second IDE disk, and FreeBSD > on a SCSI disk. I've figured out how to mount the Windows partitions under > FreeBSD but what I really want to do is mount the Linux ext2 partition(s) so > that I > can keep the software I'm porting in one spot. > > Is this possible? I see some hints in the documentation that it might be, > but I don't seem to have the right software loaded or the right "magic" > commands to > make it work. If its possible can someone give me some pointers? > > Thanks, > > Brad > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Brad Morgan > Sent: Tuesday, June 19, 2001 9:50 PM > To: freebsd-questions@FreeBSD.ORG > Subject: RE: Elsa Gladiac + XFree86 4.1.0 problem > > > Having just done the same thing I can suggest two things... > > First, you need a window manager. The command to start it goes in .xinitrc > (no & on the last line). I used KDE. > > Second, my XFree86 -configure output didn't include commands for the monitor > HorizSync and VertRefresh nor did it include any display modes so first I > got a 640x480 desktop and then (after first fixing the sync and refresh > rates) I got a 1900x1400 (or so) desktop. Try reading text on that one! > > Using xf86cfg didn't work (core dump), xf86config doesn't have GeForce 2 > listed so I ended up manually editing the XF86Config file. > > Regards, > > Brad > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Peter Prokein > Sent: Tuesday, June 19, 2001 5:48 PM > To: freebsd-questions@FreeBSD.ORG > Subject: Elsa Gladiac + XFree86 4.1.0 problem > > > Folks, > > Let's see if I can sufficiently describe what is going on. I > installed FreeBSD 4.3 using only the "User" option. Then I manually > installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I ran > "XFree86 -configure", went fine. XFree86Config reads that the card detected > is an ELSA Gladiac MX and the driver to be used is "nv", but is also > detected the card on BusID: PCI instead of AGP (not sure if it is supposed > to say AGP anyway). But when I start "XFree86 -xfconfig > /root/XFree86Config.new" the server sort of starts up, but then all I see > is a grayish screen with a black X which has a white border (my cursor). I > can move that cursor around, but that is all can do. The server responds > to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down > with CtrlAltBackspace no errors appear, looks like a normal shutdown (as > far as I can tell). > > Any help will be greatly appreciated. > > Thanks in advance, > Peter > > > ============================================ > Peter Prokein > Institute for Northern Engineering > University of Alaska Fairbanks > 316 Skarland Hall. > Fairbanks, Alaska 99775-5860 > > Work phone: (907) 474-2720 > Fax: (907) 474-7979 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21: 9:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from intratec.com.mx (intratec.com.mx [200.33.246.239]) by hub.freebsd.org (Postfix) with ESMTP id 24BC537B401 for ; Tue, 19 Jun 2001 21:09:56 -0700 (PDT) (envelope-from jbiquez@icsmx.com) Received: from mipc.intranet.com.mx (200.33.246.55) by intratec.com.mx with ESMTP (Eudora Internet Mail Server 3.0.2) for ; Tue, 19 Jun 2001 23:10:03 -0600 Message-Id: <5.0.2.1.2.20010619230840.01c8c730@icsmx.com> X-Sender: jbiquez@icsmx.com X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Tue, 19 Jun 2001 23:11:02 -0500 To: freebsd-questions@FreeBSD.ORG From: Jorge Biquez Subject: OT. Compaq Proliant 1600/300 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all. I'm sorry this is off topic. A client changed his server and is selling me a Compaq Proliant 1600/300 with 384 Mb, 3 Hd Ultra wide SCSI 9.1GB each and a DAT 12/24 Gb. The machine is a Pentium II one. I was thinking on buying an old machine for my testings and learning with Freebsd 4.3 and seems this one could be of help. Questions: 1) Any ideas of how much is the value of this machine? 2) Anyone is working with FreeBSD 4.2 or superior with this model?. Thanks in advance for your comments. JB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:12:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.9.37.251]) by hub.freebsd.org (Postfix) with ESMTP id BB58737B408 for ; Tue, 19 Jun 2001 21:12:34 -0700 (PDT) (envelope-from imush@mail.ru) Received: from omsk.mushinsky.net (itz@localhost [127.0.0.1]) by omsk.mushinsky.net (8.11.3/8.11.1) with SMTP id f5K4B0W62717 for ; Wed, 20 Jun 2001 00:11:00 -0400 (EDT) (envelope-from imush@mail.ru) Content-Type: text/plain; charset="koi8-r" From: Isaac Mushinsky To: "freebsd-questions" Subject: Re: customizing console?? Date: Wed, 20 Jun 2001 00:11:00 -0400 X-Mailer: KMail [version 1.2] References: <993008866.3b301ce25b0ab@my.usask.ca> In-Reply-To: <993008866.3b301ce25b0ab@my.usask.ca> MIME-Version: 1.0 Message-Id: <01062000110001.62495@omsk.mushinsky.net> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Try=20 set prompt=3D"$PWD-> " in your .cshrc On Tuesday 19 June 2001 23:47, you wrote: > i'm using csh... how can i set up a prompt showing the current director= y? > Anyone tell me some good internet resources about configuring console??= ? > > Thank you in advance... > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:13:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.9.37.251]) by hub.freebsd.org (Postfix) with ESMTP id 7519F37B403 for ; Tue, 19 Jun 2001 21:13:34 -0700 (PDT) (envelope-from imush@mail.ru) Received: from omsk.mushinsky.net (itz@localhost [127.0.0.1]) by omsk.mushinsky.net (8.11.3/8.11.1) with SMTP id f5K4BqW62721 for ; Wed, 20 Jun 2001 00:11:52 -0400 (EDT) (envelope-from imush@mail.ru) Content-Type: text/plain; charset="koi8-r" From: Isaac Mushinsky To: "freebsd-questions" Subject: Fwd: Re: sendmail??? Date: Wed, 20 Jun 2001 00:11:52 -0400 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <01062000115202.62495@omsk.mushinsky.net> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I assume this only happens when you log in as root? Some daemons and syst= em programs can write mail directly to your mailbox. They do not 'send' the mail, they just write you messages. Some day you may be sorry to miss thi= s mail, but if you are determined to get rid of it, redirect the mail to so= me other user or try linking the root's mailbox to /dev/null altogether. On Tuesday 19 June 2001 23:43, you wrote: > whenever i login a console, i got a message"you have a mail"..even if i > removed "sendmail".... How can i get rid of this? or where should i che= ck > out? > > Thank you in advance... > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:14:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.9.37.251]) by hub.freebsd.org (Postfix) with ESMTP id 7783C37B408 for ; Tue, 19 Jun 2001 21:14:34 -0700 (PDT) (envelope-from imush@mail.ru) Received: from omsk.mushinsky.net (itz@localhost [127.0.0.1]) by omsk.mushinsky.net (8.11.3/8.11.1) with SMTP id f5K4DeW62729 for ; Wed, 20 Jun 2001 00:13:40 -0400 (EDT) (envelope-from imush@mail.ru) Content-Type: text/plain; charset="koi8-r" From: Isaac Mushinsky To: "freebsd-questions" Subject: Re: Linux and FreeBSD filesystem sharing. Date: Wed, 20 Jun 2001 00:13:40 -0400 X-Mailer: KMail [version 1.2] References: In-Reply-To: MIME-Version: 1.0 Message-Id: <01062000134003.62495@omsk.mushinsky.net> Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Put option EXT2FS in kernel config file and recompile them use mount_ext2fs, or identify the filesystem as ext2fs in /etc/fstab On Wednesday 20 June 2001 00:01, you wrote: > I finally got my DELL 4100 (933MHz P-III) running FreeBSD well enough t= o > start working on my project of porting some Linux software to FreeBSD. > > I have Windows ME on one IDE disk, Linux on a second IDE disk, and Free= BSD > on a SCSI disk. I've figured out how to mount the Windows partitions u= nder > FreeBSD but what I really want to do is mount the Linux ext2 partition(= s) > so that I > can keep the software I'm porting in one spot. > > Is this possible? I see some hints in the documentation that it might = be, > but I don't seem to have the right software loaded or the right "magic" > commands to > make it work. If its possible can someone give me some pointers? > > Thanks, > > Brad > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Brad Morgan > Sent: Tuesday, June 19, 2001 9:50 PM > To: freebsd-questions@FreeBSD.ORG > Subject: RE: Elsa Gladiac + XFree86 4.1.0 problem > > > Having just done the same thing I can suggest two things... > > First, you need a window manager. The command to start it goes in .xin= itrc > (no & on the last line). I used KDE. > > Second, my XFree86 -configure output didn't include commands for the > monitor HorizSync and VertRefresh nor did it include any display modes = so > first I got a 640x480 desktop and then (after first fixing the sync and > refresh rates) I got a 1900x1400 (or so) desktop. Try reading text on = that > one! > > Using xf86cfg didn't work (core dump), xf86config doesn't have GeForce = 2 > listed so I ended up manually editing the XF86Config file. > > Regards, > > Brad > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Peter Prokein > Sent: Tuesday, June 19, 2001 5:48 PM > To: freebsd-questions@FreeBSD.ORG > Subject: Elsa Gladiac + XFree86 4.1.0 problem > > > Folks, > > Let's see if I can sufficiently describe what is going on. I > installed FreeBSD 4.3 using only the "User" option. Then I manually > installed XFree86 4.1.0 using "sh Xinstall.sh". All went find. Then I r= an > "XFree86 -configure", went fine. XFree86Config reads that the card dete= cted > is an ELSA Gladiac MX and the driver to be used is "nv", but is also > detected the card on BusID: PCI instead of AGP (not sure if it is suppo= sed > to say AGP anyway). But when I start "XFree86 -xfconfig > /root/XFree86Config.new" the server sort of starts up, but then all I s= ee > is a grayish screen with a black X which has a white border (my cursor)= =2E I > can move that cursor around, but that is all can do. The server respon= ds > to CtrlAtlBackspace, but not to CtrlAlt+. When shutting the server down > with CtrlAltBackspace no errors appear, looks like a normal shutdown (a= s > far as I can tell). > > Any help will be greatly appreciated. > > Thanks in advance, > Peter > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Peter Prokein > Institute for Northern Engineering > University of Alaska Fairbanks > 316 Skarland Hall. > Fairbanks, Alaska 99775-5860 > > Work phone: (907) 474-2720 > Fax: (907) 474-7979 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:20:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from xyzzy.intranet.snsonline.net (dhcp.looksmart.com.au [202.53.47.178]) by hub.freebsd.org (Postfix) with ESMTP id 9615837B401 for ; Tue, 19 Jun 2001 21:20:23 -0700 (PDT) (envelope-from msergeant@looksmart.net) Received: from xyzzy.intranet.snsonline.net (localhost [127.0.0.1]) by xyzzy.intranet.snsonline.net (8.11.4/8.11.3) with SMTP id f5K4Jvs13399 for ; Wed, 20 Jun 2001 14:19:58 +1000 (EST) (envelope-from msergeant@looksmart.net) Message-Id: <200106200419.f5K4Jvs13399@xyzzy.intranet.snsonline.net> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 From: "Mark Sergeant" To: freebsd-questions@FreeBSD.org Subject: KDE 2.1.1 build X-Mailer: Pronto v2.2.5 On freebsd/mysql Date: 19 Jun 2001 23:19:51 EST Reply-To: "Mark Sergeant" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anyone else had any issues building this port ? The error I get is as follows... configure:4957: checking for libjpeg6b configure:4995: cc -o conftest -O2 -O -pipe -I/usr/X11R6/include -I/usr/inclu de -D_GETOPT_H -D_PTH_H_ -D_PTH_PTHREAD_H_ -I/usr/local/include -I/usr/local/in clude -I/usr/X11R6/include/qt2 conftest.c -L/usr/X11R6/lib -L/usr/local/lib -l jpeg6b -lm 1>&5 /usr/libexec/elf/ld: cannot find -ljpeg6b configure: failed program was: #line 4974 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ struct jpeg_decompress_struct; typedef struct jpeg_decompress_struct * j_decompress_ptr; typedef int size_t; #ifdef __cplusplus extern "C" { #endif void jpeg_CreateDecompress(j_decompress_ptr cinfo, int version, size_t structsize); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ int main() { jpeg_CreateDecompress(0L, 0, 0); ; return 0; } configure:5018: checking for libjpeg configure:5056: cc -o conftest -O2 -O -pipe -I/usr/X11R6/include -I/usr/inclu de -D_GETOPT_H -D_PTH_H_ -D_PTH_PTHREAD_H_ -I/usr/local/include -I/usr/local/in clude -I/usr/X11R6/include/qt2 conftest.c -L/usr/X11R6/lib -L/usr/local/lib -l jpeg -lm 1>&5 configure:5221: checking for Qt configure:5382: rm -rf SunWS_cache; c++ -o conftest -O2 -fno-exceptions -fno-che ck-new -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings - Wno-long-long -Wnon-virtual-dtor -fno-builtin -O -pipe -I/usr/X11R6/include/qt2 -I/usr/X11R6/include -I/usr/include -D_GETOPT_H -D_PTH_H_ -D_PTH_PTHREAD_H_ -I /usr/local/include -I/usr/local/include -I/usr/X11R6/include/qt2 -L/usr/X11R6/l ib -L/usr/X11R6/lib -L/usr/local/lib conftest.C -Wl,-export-dynamic -L/usr/loca l/lib -L/usr/X11R6/lib -ljpeg -lgcc -lstdc++ -lqt2 -lpng -lz -lm -ljpeg -lXext -lX11 -lSM -lICE 1>&5 conftest.C:11: #error 1 conftest.C: In function `int main()': conftest.C:20: warning: unused variable `int magnolia' conftest.C:15: warning: unused variable `class QStringList * t' configure: failed program was: #include "confdefs.h" #include #include #include #include #include #include #include #include #if ! (QT_VERSION >= 222) #error 1 #endif int main() { QStringList *t = new QStringList(); QIconView iv(0); iv.setWordWrapIconText(false); QString s; s.setLatin1("Elvis is alive", 14); int magnolia = QEvent::Speech; /* new in 2.2 beta2 */ return 0; } (end of "config.log") *** Error code 1 Stop in /usr/ports/converters/kdesupport2. *** Error code 1 Mark Sergeant Unix Systems Administrator Fortune follows... If you put garbage in a computer nothing comes out but garbage. But this garbage, having passed through a very expensive machine, is somehow enobled and none dare criticize it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:53:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.sfu.ca (cs.sfu.ca [142.58.111.1]) by hub.freebsd.org (Postfix) with ESMTP id DBAA237B407 for ; Tue, 19 Jun 2001 21:53:18 -0700 (PDT) (envelope-from mcneney@cs.sfu.ca) Received: from smahlt.math.sfu.ca (smahlt [199.60.17.25]) by cs.sfu.ca (8.9.1/8.9.1) with ESMTP id VAA00367 for ; Tue, 19 Jun 2001 21:53:18 -0700 (PDT) Received: from localhost by smahlt.math.sfu.ca (8.8.8/1.1.20.8/23Nov99-0751PM) id VAA0000012168; Tue, 19 Jun 2001 21:53:17 -0700 (PDT) X-Authentication-Warning: smahlt.math.sfu.ca: mcneney owned process doing -bs Date: Tue, 19 Jun 2001 21:53:17 -0700 (PDT) From: Brad McNeney X-Sender: mcneney@smahlt.math.sfu.ca To: freebsd-questions@FreeBSD.org Subject: ipfw Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm having no luck using ipfw -- getting thingslike: # ipfw -f flush ipfw: setsockopt(IP_FW_FLUSH): Protocol not available or # ipfw list ipfw: getsockopt(IP_FW_GET): Protocol not available I built a 4.3-STABLE kernel with options IPFIREWALL_VERBOSE and have set firewall_type="OPEN" in /etc/rc.conf. I'm sure I'm missing something obvious here... Any thoughts? Brad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 21:56:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f167.law15.hotmail.com [64.4.23.167]) by hub.freebsd.org (Postfix) with ESMTP id 3CF8C37B403 for ; Tue, 19 Jun 2001 21:56:22 -0700 (PDT) (envelope-from leeroyzz@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 19 Jun 2001 21:56:22 -0700 Received: from 63.221.138.130 by lw15fd.law15.hotmail.msn.com with HTTP; Wed, 20 Jun 2001 04:56:22 GMT X-Originating-IP: [63.221.138.130] From: "Klein B" To: questions@freebsd.org Subject: freebsd-stable Date: Wed, 20 Jun 2001 04:56:22 -0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 20 Jun 2001 04:56:22.0145 (UTC) FILETIME=[59D33F10:01C0F945] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, i would like to upgrade my freeBSD4.3-RELEASE to freeBSD4.3-STABLE. is this command i enough ? pkg_add -f \ftp://ftp.FreeBSD.org/pub/FreeBSD/development/CVSup/cvsupit.tgz Thanks. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22: 1:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id D4A9337B406 for ; Tue, 19 Jun 2001 22:01:09 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id HAA14058; Wed, 20 Jun 2001 07:09:56 +0200 Message-ID: <3B302E8C.E8E5BAA6@i-clue.de> Date: Wed, 20 Jun 2001 07:03:08 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Klein B Cc: questions@FreeBSD.ORG Subject: Re: freebsd-stable References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Klein B schrieb: > > Hi, > > i would like to upgrade my freeBSD4.3-RELEASE to freeBSD4.3-STABLE. > > is this command i enough ? > > pkg_add -f \ftp://ftp.FreeBSD.org/pub/FreeBSD/development/CVSup/cvsupit.tgz This would only add the command[s] needed to upgrade your source. Read the whole story at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html > Thanks. You're welcome. HTH -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:16:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id A8C0337B401 for ; Tue, 19 Jun 2001 22:16:30 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id HAA14106; Wed, 20 Jun 2001 07:25:17 +0200 Message-ID: <3B303225.AEF8F5D8@i-clue.de> Date: Wed, 20 Jun 2001 07:18:29 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Bjarne Wichmann Petersen Cc: Carsten Reimer , freebsd-questions@FreeBSD.ORG Subject: Re: How to run kdm References: <20010619084314.3b5908c0.mekanix@privat.dk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bjarne Wichmann Petersen schrieb: > > On Mon, 18 Jun 2001 14:56:45 +0200 (MES) > Carsten Reimer wrote: > > > It is started on booting time from a > > startup-script in /usr/local/etc/rc.d . > > I'd like to know a little more on how you start kdm. I've tried just > running kdm of /etc/rc.conf which starts kdm fine, but it locks out all > keyinput but not mouse. > > Running kdm of a root-prompt works fine, so kdm is configured correct. Create a simple startup script in /usr/local/etc/rc.d. The trick is either to hardwire kdm to an unused console screen; or to have kdm sleep until syscons is fully up. Simple snippet from mine: #!/bin/sh # # kdm.sh -- startup script to launch kdm at reboot # KDM=/usr/local/bin/kdm if [ "x$1" = "x" -o "x$1" = "xstart" ]; then echo " kdm" (sleep 60; $KDM )& fi HTH -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:23:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id EFBFC37B406 for ; Tue, 19 Jun 2001 22:23:19 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id HAA14145; Wed, 20 Jun 2001 07:32:07 +0200 Message-ID: <3B3033BF.D48FE443@i-clue.de> Date: Wed, 20 Jun 2001 07:25:19 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: geoffrey shepler Cc: freebsd-questions@FreeBSD.ORG Subject: Re: freeBSD and athlon/duron References: <3B2D79E7.59B11CDC@earthlink.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG geoffrey shepler schrieb: > > Hi, > Are there any known problems running freeBSD on an AMD system? None. Also tried with all Athlons up to 1GHz. FreeBSD 4.3-STABLE #3: Wed Jun 20 06:56:53 CEST 2001 root@msgate.ms-agentur.de:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (500.02-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf AMD Features=0x80000800 YMMV -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:28:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from maila.telia.com (maila.telia.com [194.22.194.231]) by hub.freebsd.org (Postfix) with ESMTP id C6A2237B403 for ; Tue, 19 Jun 2001 22:28:08 -0700 (PDT) (envelope-from ertr1013@student.uu.se) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by maila.telia.com (8.11.2/8.11.0) with ESMTP id f5K5S7026748 for ; Wed, 20 Jun 2001 07:28:07 +0200 (CEST) Received: from ertr1013.student.uu.se (h185n2fls20o913.telia.com [212.181.163.185]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id HAA23744 for ; Wed, 20 Jun 2001 07:28:06 +0200 (CEST) Received: (qmail 25889 invoked by uid 1001); 20 Jun 2001 05:27:37 -0000 Date: Wed, 20 Jun 2001 07:27:36 +0200 From: Erik Trulsson To: Keith Spencer Cc: fbsd Subject: Re: how do I use mergemaster? Message-ID: <20010620072736.A24314@student.uu.se> Mail-Followup-To: Keith Spencer , fbsd References: <20010619074707.A50989@student.uu.se> <20010619231947.95662.qmail@web12003.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20010619231947.95662.qmail@web12003.mail.yahoo.com> User-Agent: Mutt/1.3.19i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Jun 20, 2001 at 09:19:47AM +1000, Keith Spencer wrote: > Hi Erik and all, > Thanks for the help. > Trouble is I have chosen h but what does left right > etc mean? How do I know what to do? > e.g. I have changed > rc.conf > do I choose left right what? > Unclear for me I am afraid. > Thanks for your patience > Keith It displays the lines in the file that differ between the file you have installed and the new file. The left version is the old one you have installed. The right version is the new one. Which one you choose depends on which you want. If you have done some modifications to the file then you probably want the left side for those parts containging those modifications. You almost alwasy want to update the line containing the CVS version. (I.e. choose the version on the right.) (Usually the first line in the file.) This is because mergemaster ignores files having the same CVS id even if they have different contents. In this way you can have files with local modifications without mergemaster asking about them every time you upgrade your system. -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:32:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id 8F4F537B403 for ; Tue, 19 Jun 2001 22:32:39 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id HAA14158; Wed, 20 Jun 2001 07:41:26 +0200 Message-ID: <3B3035EE.5FA3C742@i-clue.de> Date: Wed, 20 Jun 2001 07:34:38 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Christian Kuhtz Cc: questions@FreeBSD.ORG Subject: Re: a/d boards? References: <3B2C1A9A.B37E1B9@gnu.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Christian Kuhtz schrieb: > > Hello, > > does anyone have pointers for working a/d boards under FreeBSD? http://www.freebsd.org/releases/4.3R/notes.html lists GPIB and Transputer drivers; LINT knows about # gp: National Instruments AT-GPIB and AT-GPIB/TNT board # labpc: National Instrument's Lab-PC and Lab-PC+ HTH -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:44:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id 3AB9E37B406 for ; Tue, 19 Jun 2001 22:44:39 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id HAA14214; Wed, 20 Jun 2001 07:53:14 +0200 Message-ID: <3B3038B2.ECF20660@i-clue.de> Date: Wed, 20 Jun 2001 07:46:26 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Thomas David Rivers Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Good tape drive? References: <200106161126.HAA22578@lakes.dignus.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thomas David Rivers schrieb: > > We're setting up a new facility which will need a good back-up > solution... > > From a scan of the archives - it seems amanda is still the > back-up solution of choice. > > So - what we need now is a good tape-drive to back things up to. > > This will be a FreeBSD server, with about 90Gig on it (when it's > maxed out.) > > Does anyone care to share their recommendation/experiences? Bechmark DTL1 (also available from Dell, Compaq,...) does it's job. sa0 at ahc0 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit) After some near disasters with DDS tapes, I completely removed them from active duty. Just my EUR.02 -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:48:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu26-228-058.nc.rr.com [66.26.228.58]) by hub.freebsd.org (Postfix) with ESMTP id DA33337B401 for ; Tue, 19 Jun 2001 22:48:12 -0700 (PDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.3/8.11.3) with ESMTP id f5K5llJ09467; Wed, 20 Jun 2001 01:47:47 -0400 (EDT) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Wed, 20 Jun 2001 01:47:47 -0400 (EDT) From: Joe Clarke To: Brad McNeney Cc: Subject: Re: ipfw In-Reply-To: Message-ID: <20010620014537.E9098-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Do you have options IPFIREWALL in the kernel, or the ipfw.ko module loaded? You need IPFIREWALL before you can have IPFIREWALL_VERBOSE. Joe Clarke On Tue, 19 Jun 2001, Brad McNeney wrote: > I'm having no luck using ipfw -- getting thingslike: > # ipfw -f flush > ipfw: setsockopt(IP_FW_FLUSH): Protocol not available > > or > # ipfw list > ipfw: getsockopt(IP_FW_GET): Protocol not available > > I built a 4.3-STABLE kernel with options IPFIREWALL_VERBOSE > and have set firewall_type="OPEN" in /etc/rc.conf. > > I'm sure I'm missing something obvious here... Any thoughts? > > Brad > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 22:52:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.halplant.com (24-168-203-47.wo.cox.rr.com [24.168.203.47]) by hub.freebsd.org (Postfix) with ESMTP id 75FE137B401 for ; Tue, 19 Jun 2001 22:52:25 -0700 (PDT) (envelope-from A.J.Caines@halplant.com) Received: by mail.halplant.com (Postfix, from userid 1001) id 8E26B2176; Wed, 20 Jun 2001 01:52:14 -0400 (EDT) Date: Wed, 20 Jun 2001 01:52:14 -0400 From: Andrew J Caines To: FreeBSD Questions Subject: Re: Postfix: cannot find /etc/aliases.db Message-ID: <20010620015214.A66604@hal9000.servehttp.com> Reply-To: Andrew J Caines Mail-Followup-To: FreeBSD Questions References: <001601c0f5b9$bb12a4d0$0101a8c0@chillipepper> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <001601c0f5b9$bb12a4d0$0101a8c0@chillipepper>; from herveyw@dynamic-cast.com on Fri, Jun 15, 2001 at 09:39:21AM -0700 Organization: H.A.L. Plant X-Powered-by: FreeBSD 4.3-STABLE X-PGP-Fingerprint: C59A 2F74 1139 9432 B457 0B61 DDF2 AA61 67C3 18A1 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hervey, Please wrap your messages before eighty columns. > When receiving mail, postfix complains that it cannot open > /etc/aliases.db. I modifed the main.cf file and set $aliases_database to > point to /etc/mail/aliases.db but postfix still complained about > /etc/aliases.db. In your main.cf, you should probably have two lines like this: alias_maps = hash:/etc/mail/aliases alias_database = hash:/etc/mail/aliases To update the database after you have changed the aliases file, run # postalias /etc/mail/aliases and your /etc/mail/aliases.db will be updated with the new aliases. If you are more familiar with sendmail, then this is the equivalent of running "newaliases". -Andrew- -- _______________________________________________________________________ | -Andrew J. Caines- Unix Systems Engineer A.J.Caines@altavista.net | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23: 4:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.chat.ru (gnu.chat.ru [212.24.32.10]) by hub.freebsd.org (Postfix) with ESMTP id C64BE37B406 for ; Tue, 19 Jun 2001 23:04:37 -0700 (PDT) (envelope-from percent@chat.ru) Received: from [213.147.50.162] (helo=stas) by mail.chat.ru with asmtp (Exim 3.22 #14) id 15Cb0z-00073O-00 for freebsd-questions@FreeBSD.ORG; Wed, 20 Jun 2001 09:58:57 +0400 Message-ID: <000a01c0f94f$5e823ca0$a23293d5@stas> From: "Stas" To: Subject: HOW ABOUT i815 VIDEO CHIPSET SUPPORTING? Date: Wed, 20 Jun 2001 10:08:03 +0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C0F970.E4CA7220" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Authorized: percent Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C0F970.E4CA7220 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable ------=_NextPart_000_0007_01C0F970.E4CA7220 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: quoted-printable
 
------=_NextPart_000_0007_01C0F970.E4CA7220-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23: 7:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id D389037B401 for ; Tue, 19 Jun 2001 23:07:24 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id IAA14294; Wed, 20 Jun 2001 08:16:09 +0200 Message-ID: <3B303E11.DC643817@i-clue.de> Date: Wed, 20 Jun 2001 08:09:21 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Steve Tremblett Cc: freebsd-questions@FreeBSD.ORG Subject: Re: OT: current hard disks & old EIDE controllers? References: <20010615120337.C28619@sjt-u10.cisco.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Steve Tremblett schrieb: > > This is slightly offtopic, but I figure a lot of you people know > PCs well. > > I'm totally out of the loop in the PC world, and the last machine I > bought was a P75 (which I still use) - the time has come to get a new > hard disk, but I don't know what all these technologies are. I don't > know much about current trends, but all the drives I see are UDMA or > ATA66. I know that (E)IDE is backwards compatible with the original > ATA, so that would suggest that this ATA66 stuff is as well, but I > really don't know. > > Are current IDE-derived drives compatible with old EIDE controllers? Theoretically, yes. > Will my BIOS freak out or does it matter? Unfortunately, yes- > Are there any issues with running FreeBSD in a system like this? If your system is that old, you may think about upgrading to a recent 4.x versions first: there where bugs in the wd driver triggerd by big drives. HTH -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23: 9:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id 8A22A37B401 for ; Tue, 19 Jun 2001 23:09:53 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id IAA14307; Wed, 20 Jun 2001 08:18:17 +0200 Message-ID: <3B303E91.B82BA0D0@i-clue.de> Date: Wed, 20 Jun 2001 08:11:29 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: cengo@cclub.ktu.edu.tr Cc: freebsd-questions@FreeBSD.ORG Subject: Re: password from linux to freebsd References: <200106151336.f5FDaK800313@cclub.ktu.edu.tr> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG cengo@cclub.ktu.edu.tr schrieb: > > hello > we are using slackware in our department (computer engineering) in Karadeniz Technical University > and we want to switch our slackware system to freebsd > but we have a problem about password files > that we could not pass our user password from slackware to freebsd > why we want to pass our users passwords from slackware to freebsd is that our users can log in to new system > with their old passwords > we are looking forward to hearing from you Just copy the lines out of the master passwd file into the FreeBSD one using vipw. HTH -Christoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23:32:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.lix.aon.at (smtp1.lix.aon.at [195.3.86.158]) by hub.freebsd.org (Postfix) with ESMTP id 90B4C37B401 for ; Tue, 19 Jun 2001 23:32:23 -0700 (PDT) (envelope-from martin.schreiber@co-merce.at) Received: from avant ([212.183.26.194]) by smtp1.lix.aon.at (Build 98 8.9.3/NT-8.9.3) with SMTP id IAA03466; Wed, 20 Jun 2001 08:31:49 +0200 Message-ID: <004e01c0f952$e2a93b70$d5fea8c0@avant> From: "Martin Schreiber" To: Cc: References: <20010619133343.G52646-100000@shumai.marcuscom.com> Subject: Re: build failed Date: Wed, 20 Jun 2001 08:33:07 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.3018.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.3018.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Joe, thank you very much, i also replaced the DIMMs and now everything working fine ! ....thats funny.... thanks martin ----- Original Message ----- From: "Joe Clarke" To: "Martin Schreiber" Cc: Sent: Tuesday, June 19, 2001 7:35 PM Subject: Re: build failed > Signal 11's are usually related to faulty hardware. I use to run into > these all the time when I had bad memory. After replacing the DIMM, > everything worked much more reliably. > > Joe Clarke > > On Tue, 19 Jun 2001, Martin Schreiber wrote: > > > > > This is the error message when running make : > > > > cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes > -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-exten s > > ions -ansi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include > > opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/tlphy.c > > {standard input}: cc: Assembler messages: > > Internal compiler error: program cc1 got fatal signal 11{standard input}:0: > > Warning: *** Error code 1 > > end of file in string: inserted '"' > > > > Stop in /usr/src/sys/compile/TOR. > > {standard input}:249: tor# Warning: .stabs: Missing comma > > > > tor# > > > > sorry that i forgot the MAIN thing in the first mail... > > > > thanks > > martin > > ----- Original Message ----- > > From: "Joe Clarke" > > To: "Martin Schreiber" > > Cc: > > Sent: Tuesday, June 19, 2001 5:50 PM > > Subject: Re: build failed > > > > > > > Can you please include the errors you get when compiling? > > > > > > Joe Clarke > > > > > > On Tue, 19 Jun 2001, Martin Schreiber wrote: > > > > > > > > > > > Dear FreeBSD Team, > > > > > > > > i have tried to build a new kernel because i want to use my freebsd > > maschine as a gateway. > > > > I have 2 NICs installed ( 3com and SCM ) and the config is running fine, > > also the make depend, > > > > but the make failed. > > > > > > > > Can you help me please ? > > > > > > > > thanks > > > > martin > > > > > > > > > > > > the kernel file is attached > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23:33:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gekko.i-clue.de (server.ms-agentur.de [62.153.134.194]) by hub.freebsd.org (Postfix) with ESMTP id F0B8637B403 for ; Tue, 19 Jun 2001 23:33:12 -0700 (PDT) (envelope-from so@server.i-clue.de) Received: from i-clue.de (automatix.i-clue.de [192.168.0.112]) by gekko.i-clue.de (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id IAA14377; Wed, 20 Jun 2001 08:41:59 +0200 Message-ID: <3B30441F.FD05AE98@i-clue.de> Date: Wed, 20 Jun 2001 08:35:11 +0200 From: Christoph Sold Reply-To: so@server.i-clue.de X-Mailer: Mozilla 4.75 [de] (WinNT; U) X-Accept-Language: de MIME-Version: 1.0 To: Michael Harnois Cc: freebsd-questions@FreeBSD.ORG Subject: Re: connecting pc camera through natd References: <86bsnrgn71.fsf@mharnois.workgroup.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Michael Harnois schrieb: > > I have an Intel PC Pro Camera currently connected to my laptop, a > machine hung on my internal network with internet access through natd. > Is there a way to make this camera accessible from the outside, i.e. > to specify a port that will get through natd to the camera? Have a look at man natd, especially at the -redirect_port option. HTH -CHristoph Sold To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23:41:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from thor.oit.pdx.edu (thor.oit.pdx.edu [131.252.120.40]) by hub.freebsd.org (Postfix) with ESMTP id 14A7037B406; Tue, 19 Jun 2001 23:41:52 -0700 (PDT) (envelope-from singh@pdx.edu) Received: from freke.odin.pdx.edu (freke.odin.pdx.edu [131.252.120.43]) by thor.oit.pdx.edu (8.11.1/8.11.1) with ESMTP id f5K6fpX15913; Tue, 19 Jun 2001 23:41:51 -0700 (PDT) Received: from localhost (singh@localhost) by freke.odin.pdx.edu (8.11.1/8.11.1) with ESMTP id f5K6fpl29308; Tue, 19 Jun 2001 23:41:51 -0700 (PDT) X-Authentication-Warning: freke.odin.pdx.edu: singh owned process doing -bs Date: Tue, 19 Jun 2001 23:41:51 -0700 (PDT) From: Harkirat Singh X-X-Sender: To: Cc: Subject: FreeBSd- 4.2 wireless network RTS/CTS In-Reply-To: <20010420100740.D1492@billygoat.slb.to> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi All! I have a adhoc network of four laptops, I want to know how can I enable RTS/CTS feature. Is RTS/CTS enabled by default ? In wicontrol I see "RTS/CTS threshold : 2347", I have no idea what does this mean. Thanks for your reply, Harkirat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Jun 19 23:46:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout1-hme0.midsouth.rr.com (mailout1-hme0.midsouth.rr.com [24.165.200.10]) by hub.freebsd.org (Postfix) with ESMTP id 305D937B403 for ; Tue, 19 Jun 2001 23:46:46 -0700 (PDT) (envelope-from thadood@mail-qfe0.midsouth.rr.com) Received: from thadood.pop-server.midsouth.rr.com (HubX-mcr-24-165-195-244.midsouth.rr.com [24.165.195.244]) by mailout1-hme0.midsouth.rr.com (8.11.2/8.11.2) with ESMTP id f5K6kWA08605 for ; Wed, 20 Jun 2001 01:46:33 -0500 (CDT) Message-Id: <5.1.0.14.0.20010620014140.00a7bca8@pop-server.midsouth.rr.com> X-Sender: thadood@pop-server.midsouth.rr.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 20 Jun 2001 01:46:42 -0500 To: freebsd-questions@freebsd.org From: thadood Subject: looutput: af=0 unexpected error Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I was having problems getting my eggdrop to use DCC chat. Being hasty and having no patience, I decided to open ports 1024-5000 to my main box via the router settings. After I did that, the box became disgustingly slow on connecting remotely. An eggdrop was disconnected without a command given. I decided to reboot to fix any problems. Upon reboot, the system froze at loading sendmail. It did this twice, failing to move after 5 minutes of waiting. I was considering formatting it again. Then I realized I opened ports to my main box. I undid this, rebooted the machine, and it booted right on up. Now, here's the main problem. After rebooting, I normally kill dhclient and restart it to get a correct address. When doing this after the error, I get this: Jun 20 01:41:04 thadood /kernel: looutput: af=0 unexpected Jun 20 01:41:04 thadood dhclient: send_packet: Address family not supported by protocol family in about 60 second intervals. The only programs I have installed lately is eggdrop and screen. Computer information: Pentium II 350Mhz 50mb system ram 2.5gb WD caviar HDD Linksys LNE100TX ethernet card (dc0) Generic cdrom, vid card. Thanks for the help in advanced =) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 0:10:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ashburn.skiltech.com (ashburn.skiltech.com [216.235.79.239]) by hub.freebsd.org (Postfix) with ESMTP id DF20B37B401 for ; Wed, 20 Jun 2001 00:10:55 -0700 (PDT) (envelope-from minter@ashburn.skiltech.com) Received: (from minter@localhost) by ashburn.skiltech.com (8.11.3/8.11.1) id f5K0Opd15426; Tue, 19 Jun 2001 20:24:51 -0400 (EDT) (envelope-from minter) Date: Tue, 19 Jun 2001 20:24:51 -0400 (EDT) From: "H. Wade Minter" X-X-Sender: To: Subject: Copying files to VMWare2 virtual disk Message-ID: <20010619202254.M15084-100000@ashburn.skiltech.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there any way, using mtools, vnconfig, etc. to copy files from FreeBSD to a VMWare DOS-formatted virtual disk? I can't find anything about mtools, and using vnconfig gives a "Device not configured" error. For the vnconfig, I did: vnconfig -e /dev/vn0 /home/minter/vmware/dos/dos.dsk mount -t msdos /dev/vn0 /tmp/mnt Any ideas? --Wade To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 0:30: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.hsn.net (mail.hsn.net [161.254.6.7]) by hub.freebsd.org (Postfix) with ESMTP id 4C26937B406 for ; Wed, 20 Jun 2001 00:30:01 -0700 (PDT) (envelope-from ClaudioA@hsn.net) Received: from navieg1.hsn.net (navieg1.hsn.net [161.254.200.115]) by mail.hsn.net (8.9.3/8.9.3) with SMTP id DAA28541 for ; Wed, 20 Jun 2001 03:29:49 -0400 (EDT) Received: from [161.254.200.210] ([161.254.200.210]) by navieg1.hsn.net (NAVIEG 2.1 bld 63) with SMTP id M2001062003294830935 for ; Wed, 20 Jun 2001 03:29:48 -0400 Received: from exchange06.hsn.net (unverified) by (Content Technologies SMTPRS 4.2.1) with ESMTP id for ; Wed, 20 Jun 2001 03:29:49 -0400 Received: by exchange06.hsn.net with Internet Mail Service (5.5.2650.21) id ; Wed, 20 Jun 2001 03:30:05 -0400 Message-ID: <630C591C6BAB244FBAE6F9DB35A6209724C5EC@EVS01.stpete.hsn.net> From: "Claudio, Anthony" To: "'freebsd-questions@FreeBSD.ORG'" Subject: pc suited? Date: Wed, 20 Jun 2001 03:29:43 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C0F95A.D30C1572" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C0F95A.D30C1572 Content-Type: text/plain; charset="iso-8859-1" how well suited is freebsd for home pc's . can i place this on say a 380z thinkpad? will it run well with this environment of hardware or is this as i suspect better suited for servers and number crunching workstations? my e-mail: groucho454@hotmail.com ------_=_NextPart_001_01C0F95A.D30C1572 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable pc suited?

how well suited is freebsd for home = pc's .
can i place this on say a 380z = thinkpad?
will it run well with this = environment of hardware or is this as i suspect better suited for = servers and number crunching workstations?

my e-mail: = groucho454@hotmail.com

------_=_NextPart_001_01C0F95A.D30C1572-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1: 6:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from news.tcom.uzhgorod.ua (news.tcom.uzhgorod.ua [194.42.194.94]) by hub.freebsd.org (Postfix) with ESMTP id B026D37B401 for ; Wed, 20 Jun 2001 01:06:49 -0700 (PDT) (envelope-from andrewsg@mail.ru) Received: from svisor (cc1.tcom.uzhgorod.ua [194.42.196.41]) by news.tcom.uzhgorod.ua (8.11.4/8.11.4) with SMTP id f5K87ea83083 for ; Wed, 20 Jun 2001 11:07:41 +0300 (EEST) Message-ID: <003501c0f95f$d28ae060$2ac22ac2@atec.org.ua> Reply-To: "Andrew Sharandakov" From: "Andrew Sharandakov" To: References: <200106151336.f5FDaK800313@cclub.ktu.edu.tr> <3B303E91.B82BA0D0@i-clue.de> Subject: Is there any filemanager for FreeBSD like mc for Linux? Date: Wed, 20 Jun 2001 11:05:48 +0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is it possible to find any filemanager (in packages or ports) for FreeBSD like mc (Midnight Commander) for Linux or nc (Norton Commander :)))) for Dos? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1: 9:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.freebsd-corp-net-guide.com (mail.freebsd-corp-net-guide.com [206.29.169.15]) by hub.freebsd.org (Postfix) with ESMTP id 8AEF737B406 for ; Wed, 20 Jun 2001 01:09:18 -0700 (PDT) (envelope-from tedm@toybox.placo.com) Received: from tedm.placo.com (nat-rtr.freebsd-corp-net-guide.com [206.29.168.154]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id f5K89Al71263; Wed, 20 Jun 2001 01:09:10 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "'Erik Trulsson'" Cc: Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade Date: Wed, 20 Jun 2001 01:09:10 -0700 Message-ID: <003a01c0f960$48e7c7a0$1401a8c0@tedm.placo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <000201c0f8b9$4ea26e40$04fea8c0@patches> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I was just speculating that perhaps you were in PIO mode before, and there is some hardware bug or other that is affecting things. Ted Mittelstaedt tedm@toybox.placo.com Author of: The FreeBSD Corporate Networker's Guide Book website: http://www.freebsd-corp-net-guide.com >-----Original Message----- >From: Rick Moore [mailto:rick@geckobot.com] >Sent: Tuesday, June 19, 2001 5:14 AM >To: 'Ted Mittelstaedt'; 'Erik Trulsson' >Cc: freebsd-questions@FreeBSD.ORG >Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade > > >Hi Ted! > >I am under the impression that I was running UDMA before, but I don't ever >recall verifying it. Sorry I don't have a more definitive answer. Using >sysctrl I've confirmed that I'm running UDMA now... > >Rick > > > >> -----Original Message----- >> From: Ted Mittelstaedt [mailto:tedm@toybox.placo.com] >> Sent: Monday, June 18, 2001 11:55 PM >> To: rick@geckobot.com; Erik Trulsson >> Cc: freebsd-questions@FreeBSD.ORG >> Subject: RE: Significant Performance Drop during 4.0-4.3 Upgrade >> >> >> Just a question, >> >> Were you running ULTRA DMA under 4.0 or were you running PIO >> mode? >> >> Ted Mittelstaedt tedm@toybox.placo.com >> Author of: The FreeBSD Corporate Networker's Guide >> Book website: http://www.freebsd-corp-net-guide.com >> >> >> >-----Original Message----- >> >From: owner-freebsd-questions@FreeBSD.ORG >> >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Rick >> >Sent: Monday, June 18, 2001 4:43 PM >> >To: Erik Trulsson >> >Cc: freebsd-questions@FreeBSD.ORG >> >Subject: Re: Significant Performance Drop during 4.0-4.3 Upgrade >> > >> > >> >Hi Erik- >> > >> >Thanks for responding so quickly! Unless I did something wrong, >> >that didn't >> >seem to do the trick. I sure thought it was going to work, though. >> > >> >I added the following line to /boot/defaults/loader.conf: >> > >> >hw.ata.wc="1" >> > >> >...and rebooted but the performance hasn't picked up to >> where it was with >> >FreeBSD 4.0. It may have gone up some-- I haven't been tracking >> >the numbers >> >very closely. >> > >> >By coincidence, one of the three systems was upgraded to FreeBSD >> >4.3 STABLE >> >instead of RELEASE, and it too shows roughly the same >> performance metrics. >> > >> >If I didn't do this right, please let me know. Otherwise if >> you or anyone >> >has other thoughts, I'd be happy to give them a try. >> > >> >Rick >> > >> >BTW- I'm not sure it's worth mentioning, but I still don't see any >> >of this in >> >the 4.3 RELEASE notes... >> > >> > >> > >> >On Monday 18 June 2001 14:07, Erik Trulsson wrote: >> >> On Mon, Jun 18, 2001 at 01:44:23PM -0700, Rick wrote: >> >> > Hi! >> >> > >> >> > I just upgraded 3 servers from 4.0 to 4.3 FreeBSD using >> >sysinstall, and I >> >> > noticed that some rm -r operations seemed a little slow after the >> >> > upgrade. >> >> > >> >> > Coincidentally I've been working on an ISAM alternative >> to B-tree so I >> >> > have a bunch of performance benchmarks handy. The results: >> >> > >> >> > Disk hits are *much* slower after the upgrade. Many >> times slower, in >> >> > fact. I also had Berkley DB benchmarks that I was using >> for comparison >> >> > and they too were heavily impacted. >> >> > >> >> > For the life of me, I can't figure out what the heck happened! >> >> > SOFTUPDATES were off before the upgrade and I didn't >> change of the disk >> >> > tuning. I did tweak my kernel a bit, but nothing should >> have had this >> >> > effect-- I just removed a few things that weren't being >> used like EISA >> >> > and some network cards. When I examine dmesg everything >> still seems to >> >> > be recognized as ULTRA DMA, etc. I've tried putting >> everything back in >> >> > my kernel and I've try the GENERIC kernel with no improvements. >> >> > >> >> > I've looked through the release notes, etc., and couldn't find >> >anythingd >> >> > etailing this problem. Did I miss something? Am I just >> extra lucky? >> >> >> >> Yes, you missed one small thing. Write caching for IDE disks were >> >> turned off by default in 4.3-RELEASE. It has since been >> turned back on >> >> in 4.3-STABLE on since the performance hit was too big. >> >> (The reason it was turned off is that if you have the write-cache >> >> turned on can result in serious data-loss if you have a >> power failure.) >> >> >> >> You can turn it back on by setting hw.ata.wc=1 from the loader. >> >> See the manpages for ata(4) and loader(8) for more information. >> > >> >To Unsubscribe: send mail to majordomo@FreeBSD.org >> >with "unsubscribe freebsd-questions" in the body of the message >> > >> >> > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1:19:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from miro.ht.sfc.keio.ac.jp (miro.ht.sfc.keio.ac.jp [133.27.170.10]) by hub.freebsd.org (Postfix) with ESMTP id B3FFC37B401; Wed, 20 Jun 2001 01:19:54 -0700 (PDT) (envelope-from furu@ht.sfc.keio.ac.jp) Received: from localhost (bangdoll.ht.sfc.keio.ac.jp [133.27.171.136]) by miro.ht.sfc.keio.ac.jp (8.9.2/3.7W) with ESMTP id RAA14983; Wed, 20 Jun 2001 17:19:36 +0900 (JST) To: singh@pdx.edu Cc: freebsd-questions@freebsd.ORG, freebsd-mobile@freebsd.ORG Subject: Re: FreeBSd- 4.2 wireless network RTS/CTS From: Daichi Furusaka In-Reply-To: References: <20010420100740.D1492@billygoat.slb.to> X-Mailer: Mew version 1.94.1 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20010620171636O.furu@ht.sfc.keio.ac.jp> Date: Wed, 20 Jun 2001 17:16:36 +0900 X-Dispatcher: imput version 990905(IM130) Lines: 20 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, > I have a adhoc network of four laptops, I want to know how can I > enable RTS/CTS feature. Is RTS/CTS enabled by default ? In wicontrol I see > "RTS/CTS threshold : 2347", I have no idea what does this mean. You need change the value of this threshold to zero (or smaller size than 1500). Using this threshold, wireless NIC determines whether it needs rts/cts exchange or not. If the size (in bytes) of a tx frame is smaller than this threshold, NIC exchanges RTS/CTS control frames between its destination. Otherwise, it just sends a data frame, and wait for its ack in MAC. So if you want to enable RTS/CTS feature for every transmission of frame, you just set this threshold to zero. Hope it helps, -- furu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1:35:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sh.stonehenge-net.com (dsl081-053-198.sfo1.dsl.speakeasy.net [64.81.53.198]) by hub.freebsd.org (Postfix) with ESMTP id B0C1B37B403 for ; Wed, 20 Jun 2001 01:35:54 -0700 (PDT) (envelope-from ben@stonehenge-net.com) Received: from stonehenge-net.com (blue.stonehenge-net.com [192.168.0.2]) by sh.stonehenge-net.com (8.9.3/8.8.7) with ESMTP id AAA04858 for ; Wed, 20 Jun 2001 00:36:32 -0400 Message-ID: <3B306069.E7C02456@stonehenge-net.com> Date: Wed, 20 Jun 2001 01:35:55 -0700 From: Ben X-Mailer: Mozilla 4.73 (Macintosh; U; PPC) X-Accept-Language: en,pdf MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: ups kvm? Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i'm looking at an easy way to administer a mixed bag of servers (old pentium, new athlon, blue & white mac running linux) and the simplest way seems to be a usb kvm. before i go spend $150, i thought i'd see if anyone has any experience with them? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1:45:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from postal.ece.ubc.ca (postal.ece.ubc.ca [137.82.52.241]) by hub.freebsd.org (Postfix) with ESMTP id 9B5FF37B403 for ; Wed, 20 Jun 2001 01:45:22 -0700 (PDT) (envelope-from shailesh@ece.ubc.ca) Received: from shannon.ece.ubc.ca (shannon.ece.ubc.ca [137.82.57.192]) by postal.ece.ubc.ca (Postfix) with ESMTP id 9F054EC7E; Wed, 20 Jun 2001 01:44:31 -0700 (PDT) Received: from localhost by shannon.ece.ubc.ca (8.8.5/SMI-4.0) id BAA04001; Wed, 20 Jun 2001 01:38:37 -0700 (PDT) Date: Wed, 20 Jun 2001 01:38:37 -0700 (PDT) From: shailesh sheoran To: Matthew Emmerton Cc: FreeBSD-Questions Subject: Re: d-link 530TX + cards still dysfunctional In-Reply-To: <025301c0f91f$caff1130$1200a8c0@gsicomp.on.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi matthew, phew!!!!!!!!! finally!!!!!!!! thanks a lot. it works. thanks to all those who lost sleep over this ;) cheers, Shailesh Sheoran M.ASc. Department of Electrical Engineering University of British Columbia On Tue, 19 Jun 2001, Matthew Emmerton wrote: > > HI guys, > > thanks so much for all the information. i am using the D Revision > > of the card, with the picture of a family on the front. > > has anyone had any success with revision D? is it supported in 4.3 > > - CURRENT? > > It is, but I don't think you need to take the drastic measure of > running -CURRENT :) > > If you want, you can patch your rl driver and rebuild your kernel. The > patch is about 10 lines, and is pretty simple. > > See PR kern/25640 (http://www.freebsd.org/cgi/query-pr.cgi?pr=25640) for the > patch. > > -- > Matt Emmerton > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 1:54:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from isy.liu.se (isy.liu.se [130.236.48.10]) by hub.freebsd.org (Postfix) with ESMTP id 9FC7437B401 for ; Wed, 20 Jun 2001 01:54:15 -0700 (PDT) (envelope-from mj@isy.liu.se) Received: from lagrange.isy.liu.se (lagrange.isy.liu.se [130.236.49.127]) by isy.liu.se (8.11.4/8.11.4) with ESMTP id f5K8sCT09652; Wed, 20 Jun 2001 10:54:12 +0200 (MET DST) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <003501c0f95f$d28ae060$2ac22ac2@atec.org.ua> Date: Wed, 20 Jun 2001 10:54:32 +0200 (CEST) From: Micke Josefsson To: Andrew Sharandakov Subject: RE: Is there any filemanager for FreeBSD like mc for Linux? Cc: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Midnight Commander is in the ports. Port: mc-4.5.54_2 Path: /usr/ports/misc/mc Info: Midnight Commander, a free Norton Commander Clone I believe you have to start it with 'midc' not 'mc'. On 20-Jun-01 Andrew Sharandakov wrote: > Is it possible to find any filemanager (in packages or ports) for FreeBSD > like mc (Midnight Commander) for Linux or nc (Norton Commander :)))) for > Dos? > > Thanks. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---------------------------------- Michael Josefsson, MSEE mj@isy.liu.se This message was sent by XFMail running on FreeBSD 4.3-STABLE ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 2: 2: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hq.admiral.ru (hq.admiral.ru [217.146.192.17]) by hub.freebsd.org (Postfix) with ESMTP id CF1F637B403 for ; Wed, 20 Jun 2001 02:02:05 -0700 (PDT) (envelope-from igor@mordor.admiral.ru) Received: from mordor.admiral.ru (ip147-192.admiral.ru [217.146.192.147] (may be forged)) by hq.admiral.ru (8.9.3/8.9.2) with ESMTP id NAA77797 for ; Wed, 20 Jun 2001 13:02:04 +0400 (MSD) (envelope-from igor@mordor.admiral.ru) Received: (from igor@localhost) by mordor.admiral.ru (8.11.4/8.11.4) id f5K7pqL05092 for freebsd-questions@FreeBSD.ORG; Wed, 20 Jun 2001 11:51:52 +0400 (MSD) (envelope-from igor) Date: Wed, 20 Jun 2001 11:51:51 +0400 From: Igor Robul To: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: pc suited? Message-ID: <20010620115151.A5073@mordor.admiral.ru> Reply-To: igorr@admiral.ru Mail-Followup-To: Igor Robul , "'freebsd-questions@FreeBSD.ORG'" References: <630C591C6BAB244FBAE6F9DB35A6209724C5EC@EVS01.stpete.hsn.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <630C591C6BAB244FBAE6F9DB35A6209724C5EC@EVS01.stpete.hsn.net>; from ClaudioA@hsn.net on Wed, Jun 20, 2001 at 03:29:43AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Jun 20, 2001 at 03:29:43AM -0400, Claudio, Anthony wrote: > how well suited is freebsd for home pc's . > can i place this on say a 380z thinkpad? > will it run well with this environment of hardware or is this as i suspect > better suited for servers and number crunching workstations? > my e-mail: groucho454@hotmail.com This depends on what applications you wish to use For example, if you do primary work in Microsoft Office and all your collegaus work in MS Office then FreeBSD is not for home PC. Also if you wish stable Flash, movies, all modern games then FreeBSD is not for you. But this does not mean that you can't exchange information with your friends who use MS Word for example. You, definitely, can read and even write documnets in MS Office formats, watch movies etc. You can create fun-styled text dcoments, use databses and spreadsheets. But this will take some initial timeline, and is not OutOfBox :-) -- Igor Roboul, Unix programmer @ Admiral Telecom ISP, St.Peterburg. Russia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 2:12:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id DFB6B37B401 for ; Wed, 20 Jun 2001 02:12:41 -0700 (PDT) (envelope-from simon@comsys.ntu-kpi.kiev.ua) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id F05252EECA; Wed, 20 Jun 2001 12:12:29 +0300 (EEST) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.3/8.11.3) with SMTP id f5K9AaQ44746; Wed, 20 Jun 2001 12:10:36 +0300 (EEST) Message-ID: <001301c0f960$18970160$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: "Annihilator" Cc: References: <000601c0f90f$ab0f82c0$0100a8c0@pilar> Subject: Re: FreeBSD Port: ipa-1.1.1 Date: Wed, 20 Jun 2001 12:07:48 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG IPA should be built from its port, there shouldn't be any binary packages for it, because it should be built uniquely for each site: > grep NO_PACKAGE /usr/ports/sysutils/ipa/Makefile NO_PACKAGE= "Needs to be built uniquely for each site" There wasn't NO_PACKAGE variable from the beginning of IPA port, but it was added some time ago. Probably a link you get is formed by a script which doesn't check NO_PACKAGE variable, it should be checked by the maintainer of that web-script. Thanks for your information. ----- Original Message ----- From: Annihilator Newsgroups: lucky.freebsd.ports Sent: Wednesday, June 20, 2001 2:31 AM Subject: FreeBSD Port: ipa-1.1.1 > I'm not sure if you're the right person to be informed of this, but > anyway, this link is broken (there's no such file on any of the mirror > servers). > > ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.3-release/All/ip > a-1.1.1.tgz > > Link used from this query result page: > > http://www.freebsd.org/cgi/ports.cgi?query=ipa&stype=all&release=4.3-REL > EASE%2Fi386 > > Annihilator > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 3:27:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from femail19.sdc1.sfba.home.com (femail19.sdc1.sfba.home.com [24.0.95.128]) by hub.freebsd.org (Postfix) with ESMTP id 1A99937B403 for ; Wed, 20 Jun 2001 03:27:31 -0700 (PDT) (envelope-from bushroot3@home.com) Received: from home.com ([24.22.204.118]) by femail19.sdc1.sfba.home.com (InterMail vM.4.01.03.20 201-229-121-120-20010223) with ESMTP id <20010620102730.JPGM4833.femail19.sdc1.sfba.home.com@home.com> for ; Wed, 20 Jun 2001 03:27:30 -0700 Message-ID: <3B307D7B.6040104@home.com> Date: Wed, 20 Jun 2001 06:39:55 -0400 From: Christopher Bush User-Agent: Mozilla/5.0 (X11; U; Linux 2.4.2-2smp i686; en-US; 0.8.1) Gecko/20010425 X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: I'm having some trouble with kernel configuration Content-Type: multipart/mixed; boundary="------------010904000203060900070201" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------010904000203060900070201 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit I seem to be doing something wrong while configuring my kernel. I've tried a few IRC rooms, but they keep telling me I should read the handbook. While the handbook seems to be a good source of information, either I must be illiterate, or what I'm looking for isn't there. I can configure the kernel. I don't get any error messages when I do. However, when I do a make depend, it gives me an error. I'm including my kernel configuration in hopes that maybe you'll be able to explain to me what I'm doing wrong. This is the first time I've tried to do configure and compile a kernel under FreeBSD. I've done so under Linux several times. I thought I'd try your OS, but from what I've seen in IRC, I'm supposed to be born with an understanding of it. Anyway, thanks in advance for any help. I appreciate it. --------------010904000203060900070201 Content-Type: text/plain; name="MYKERNEL" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="MYKERNEL" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 n_hibma Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU #cpu I686_CPU ident MYKERNEL maxusers 10 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device pcn # AMD Am79C79x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? port 0x300 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an # Xircom Ethernet device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP #pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet --------------010904000203060900070201-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 3:41: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from k0r3.reflektor.cz (k0r3.reflektor.cz [212.24.129.54]) by hub.freebsd.org (Postfix) with SMTP id 5A12F37B403 for ; Wed, 20 Jun 2001 03:40:53 -0700 (PDT) (envelope-from cynic@mail.cz) Received: (qmail 14106 invoked by uid 202); 20 Jun 2001 10:40:50 -0000 Received: from unknown (HELO zvahlav.mail.cz) (212.24.143.100) by k0r3.reflektor.cz with SMTP; 20 Jun 2001 10:40:50 -0000 Message-Id: <5.1.0.14.2.20010620124125.04328e88@mail.cz> X-Sender: cynic@mail.cz X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 20 Jun 2001 12:49:03 +0200 To: Christopher Bush , freebsd-questions@FreeBSD.org From: Cynic Subject: Re: I'm having some trouble with kernel configuration In-Reply-To: <3B307D7B.6040104@home.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi there, this looks pretty much like my (working) kernel. what error do you get? I don't know what machine it is (looks like the original pentium, right?), but I'd suggest you start with GENERIC, add/remove an option/device or two at a time, and build it. you'll be eventually able to isolate the setting that's giving you this error. I had the same problem as you (though mine was bombing out in make), and this procedure helped me out. This might be stupid, but anyway... Have you done # /usr/sbin/config MYKERNEL in /usr/src/sys/i386/conf before make depend? At 12:39 20.6. 2001, Christopher Bush wrote the following: -------------------------------------------------------------- >I seem to be doing something wrong while configuring my kernel. I've tried a few IRC rooms, but they keep telling me I should read the handbook. While the handbook seems to be a good source of information, either I must be illiterate, or what I'm looking for isn't there. I can configure the kernel. I don't get any error messages when I do. >However, when I do a make depend, it gives me an error. I'm including my kernel configuration in hopes that maybe you'll be able to explain to me what I'm doing wrong. This is the first time I've tried to do configure and compile a kernel under FreeBSD. I've done so under Linux several times. I thought I'd try your OS, but from what I've seen in IRC, I'm supposed to be born with an understanding of it. Anyway, thanks in advance for any help. I appreciate it. > > ># ># GENERIC -- Generic kernel configuration file for FreeBSD/i386 ># ># For more information on this file, please read the handbook section on ># Kernel Configuration Files: ># ># http://www.FreeBSD.org/handbook/kernelconfig-config.html ># ># The handbook is also available locally in /usr/share/doc/handbook ># if you've installed the doc distribution, otherwise always see the ># FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the ># latest information. ># ># An exhaustive list of options and more detailed explanations of the ># device lines is also present in the ./LINT configuration file. If you are ># in doubt as to the purpose or necessity of a line, check first in LINT. ># ># $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 n_hibma Exp $ > >machine i386 >#cpu I386_CPU >#cpu I486_CPU >cpu I586_CPU >#cpu I686_CPU >ident MYKERNEL >maxusers 10 > >#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > >#options MATH_EMULATE #Support for x87 emulation >options INET #InterNETworking >#options INET6 #IPv6 communications protocols >options FFS #Berkeley Fast Filesystem >options FFS_ROOT #FFS usable as root device [keep this!] >options SOFTUPDATES #Enable FFS soft updates support >options MFS #Memory Filesystem >options MD_ROOT #MD is a potential root device >#options NFS #Network Filesystem >#options NFS_ROOT #NFS usable as root device, NFS required >#options MSDOSFS #MSDOS Filesystem >options CD9660 #ISO 9660 Filesystem >options CD9660_ROOT #CD-ROM usable as root, CD9660 required >options PROCFS #Process filesystem >options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] >#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI >options UCONSOLE #Allow users to grab the console >options USERCONFIG #boot -c editor >options VISUAL_USERCONFIG #visual boot -c editor >options KTRACE #ktrace(1) support >options SYSVSHM #SYSV-style shared memory >options SYSVMSG #SYSV-style message queues >options SYSVSEM #SYSV-style semaphores >options P1003_1B #Posix P1003_1B real-time extensions >options _KPOSIX_PRIORITY_SCHEDULING >options ICMP_BANDLIM #Rate limit bad replies >options KBD_INSTALL_CDEV # install a CDEV entry in /dev > ># To make an SMP kernel, the next two are needed >#options SMP # Symmetric MultiProcessor Kernel >#options APIC_IO # Symmetric (APIC) I/O > >device isa >#device eisa >device pci > ># Floppy drives >device fdc0 at isa? port IO_FD1 irq 6 drq 2 >device fd0 at fdc0 drive 0 >#device fd1 at fdc0 drive 1 > ># ATA and ATAPI devices >#device ata0 at isa? port IO_WD1 irq 14 >#device ata1 at isa? port IO_WD2 irq 15 >device ata >device atadisk # ATA disk drives >device atapicd # ATAPI CDROM drives >#device atapifd # ATAPI floppy drives >#device atapist # ATAPI tape drives >options ATA_STATIC_ID #Static device numbering >#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > ># SCSI Controllers >#device ahb # EISA AHA1742 family >#device ahc # AHA2940 and onboard AIC7xxx devices >#device amd # AMD 53C974 (Teckram DC-390(T)) >#device isp # Qlogic family >#device ncr # NCR/Symbios Logic >#device sym # NCR/Symbios Logic (newer chipsets) >#options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices when > # both sym and ncr are configured > >#device adv0 at isa? >#device adw >#device bt0 at isa? >#device aha0 at isa? >#device aic0 at isa? > >#device ncv # NCR 53C500 >#device nsp # Workbit Ninja SCSI-3 >#device stg # TMC 18C30/18C50 > ># SCSI peripherals >#device scbus # SCSI bus (required) >#device da # Direct Access (disks) >#device sa # Sequential Access (tape etc) >#device cd # CD >#device pass # Passthrough device (direct SCSI access) > ># RAID controllers interfaced to the SCSI subsystem >#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID >#device dpt # DPT Smartcache - See LINT for options! >#device mly # Mylex AcceleRAID/eXtremeRAID > ># RAID controllers >#device ida # Compaq Smart RAID >#device amr # AMI MegaRAID >#device mlx # Mylex DAC960 family >#device twe # 3ware Escalade > ># atkbdc0 controls both the keyboard and the PS/2 mouse >device atkbdc0 at isa? port IO_KBD >device atkbd0 at atkbdc? irq 1 flags 0x1 >device psm0 at atkbdc? irq 12 > >device vga0 at isa? > ># splash screen/screen saver >pseudo-device splash > ># syscons is the default console driver, resembling an SCO console >device sc0 at isa? flags 0x100 > ># Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver >#device vt0 at isa? >#options XSERVER # support for X server on a vt console >#options FAT_CURSOR # start with block cursor ># If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines >#options PCVT_SCANSET=2 # IBM keyboards are non-std > ># Floating point support - do not disable. >device npx0 at nexus? port IO_NPX irq 13 > ># Power management support (see LINT for more options) >device apm0 at nexus? disable flags 0x20 # Advanced Power Management > ># PCCARD (PCMCIA) support >#device card >#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 >#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > ># Serial (COM) ports >device sio0 at isa? port IO_COM1 flags 0x10 irq 4 >device sio1 at isa? port IO_COM2 irq 3 >device sio2 at isa? disable port IO_COM3 irq 5 >device sio3 at isa? disable port IO_COM4 irq 9 > ># Parallel port >device ppc0 at isa? irq 7 >device ppbus # Parallel port bus (required) >device lpt # Printer >#device plip # TCP/IP over parallel >device ppi # Parallel port interface device >#device vpo # Requires scbus and da > > ># PCI Ethernet NICs. >#device de # DEC/Intel DC21x4x (``Tulip'') >device fxp # Intel EtherExpress PRO/100B (82557, 82558) >#device tx # SMC 9432TX (83c170 ``EPIC'') >#device vx # 3Com 3c590, 3c595 (``Vortex'') >#device wx # Intel Gigabit Ethernet Card (``Wiseman'') > ># PCI Ethernet NICs that use the common MII bus controller code. ># NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! >#device miibus # MII bus support >#device dc # DEC/Intel 21143 and various workalikes >#device pcn # AMD Am79C79x PCI 10/100 NICs >#device rl # RealTek 8129/8139 >#device sf # Adaptec AIC-6915 (``Starfire'') >#device sis # Silicon Integrated Systems SiS 900/SiS 7016 >#device ste # Sundance ST201 (D-Link DFE-550TX) >#device tl # Texas Instruments ThunderLAN >#device vr # VIA Rhine, Rhine II >#device wb # Winbond W89C840F >#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > ># ISA Ethernet NICs. >#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 >#device ex >#device ep >#device fe0 at isa? port 0x300 ># WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really ># exists only as a PCMCIA device, so there is no ISA attatement needed ># and resources will always be dynamically assigned by the pccard code. >device wi ># Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will ># work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP ># mode (the factory default). If you set the switches on your ISA ># card for a manually chosen I/O address and IRQ, you must specify ># those paremeters here. >device an ># Xircom Ethernet >device xe ># The probe order of these is presently determined by i386/isa/isa_compat.c. >#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 >#device le0 at isa? port 0x300 irq 5 iomem 0xd0000 >#device lnc0 at isa? port 0x280 irq 10 drq 0 >#device cs0 at isa? port 0x300 >#device sn0 at isa? port 0x300 irq 10 > ># Pseudo devices - the number indicates how many units to allocated. >pseudo-device loop # Network loopback >pseudo-device ether # Ethernet support >#pseudo-device sl 1 # Kernel SLIP >#pseudo-device ppp 1 # Kernel PPP >#pseudo-device tun # Packet tunnel. >pseudo-device pty # Pseudo-ttys (telnet etc) >pseudo-device md # Memory "disks" >pseudo-device gif 4 # IPv6 and IPv4 tunneling >pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > ># The `bpf' pseudo-device enables the Berkeley Packet Filter. ># Be aware of the administrative consequences of enabling this! >pseudo-device bpf #Berkeley packet filter > ># USB support >#device uhci # UHCI PCI->USB interface >#device ohci # OHCI PCI->USB interface >#device usb # USB Bus (required) >#device ugen # Generic >#device uhid # "Human Interface Devices" >#device ukbd # Keyboard >#device ulpt # Printer >#device umass # Disks/Mass storage - Requires scbus and da >#device ums # Mouse >#device uscanner # Scanners ># USB Ethernet, requires mii >#device aue # ADMtek USB ethernet >#device cue # CATC USB ethernet >#device kue # Kawasaki LSI USB ethernet ------end of quote------ cynic@mail.cz ------------- And the eyes of them both were opened and they saw that their files were world readable and writable, so they chmoded 600 their files. - Book of Installation chapt 3 sec 7 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 3:45:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay.tecc.co.uk (luggage.tecc.co.uk [193.128.6.129]) by hub.freebsd.org (Postfix) with SMTP id B78DF37B403 for ; Wed, 20 Jun 2001 03:45:14 -0700 (PDT) (envelope-from andy@tecc.co.uk) Received: from southampton [195.217.37.155] by relay.tecc.co.uk with smtp (Exim 1.70 #1) id 15CfTx-0004Tj-00; Wed, 20 Jun 2001 11:45:09 +0100 From: "Andy Kirkham" To: "Christopher Bush" , Subject: RE: I'm having some trouble with kernel configuration Date: Wed, 20 Jun 2001 11:45:09 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <3B307D7B.6040104@home.com> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in /usr/src/sys/i386/conf/MYKERNEL uncomment the line:- #device miibus to obviously become: device miibus Regards Ak > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Christopher > Bush > Sent: 20 June 2001 11:40 > To: freebsd-questions@freebsd.org > Subject: I'm having some trouble with kernel configuration > > > I seem to be doing something wrong while configuring my kernel. I've > tried a few IRC rooms, but they keep telling me I should read the > handbook. While the handbook seems to be a good source of information, > either I must be illiterate, or what I'm looking for isn't there. I can > configure the kernel. I don't get any error messages when I do. > However, when I do a make depend, it gives me an error. I'm including > my kernel configuration in hopes that maybe you'll be able to explain to > me what I'm doing wrong. This is the first time I've tried to do > configure and compile a kernel under FreeBSD. I've done so under Linux > several times. I thought I'd try your OS, but from what I've seen in > IRC, I'm supposed to be born with an understanding of it. Anyway, > thanks in advance for any help. I appreciate it. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 3:55:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mgw1.MEIway.com (mgw1.meiway.com [212.73.210.75]) by hub.freebsd.org (Postfix) with ESMTP id 5387737B401 for ; Wed, 20 Jun 2001 03:55:48 -0700 (PDT) (envelope-from LConrad@Go2France.com) Received: from mail.Go2France.com (ms1.meiway.com [212.73.210.73]) by mgw1.MEIway.com (Postfix Relay Hub) with ESMTP id DF71416B26 for ; Wed, 20 Jun 2001 13:15:53 +0200 (CEST) Received: from IBM-HIRXKN66F0W.Go2France.com [195.115.185.184] by mail.Go2France.com with ESMTP (SMTPD32-6.06) id A2DC57E0124; Wed, 20 Jun 2001 13:02:52 +0200 Message-Id: <5.1.0.14.0.20010620125001.02637ec8@mail.Go2France.com> X-Sender: LConrad@Go2France.com@mail.Go2France.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 20 Jun 2001 12:56:43 +0200 To: freebsd-questions@freebsd.org From: Len Conrad Subject: resolv.conf missing options? Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1"; format=flowed Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Iｴm setting up a couple of outbound, high-volume mail gateways that need some kind fairly quick failover when their primary DNS is down, to use another DNS. The behavior avaible in some resolvers seems sufficient. Iｴve seen resolv.conf options of such as attempts:4 and timeout:2 in the DNS & BIND book, etc but these are not in the 4.6R man resolv.conf page. Is there any other way in FreeBSD to set these resolver params? Len http://MenAndMice.com/DNS-training http://BIND8NT.MEIway.com : ISC BIND 8.2.4 for NT4 & W2K http://IMGate.MEIway.com : Build free, hi-perf, anti-abuse mail gateways To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 3:57:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heard.com.au (heard.com.au [203.53.37.162]) by hub.freebsd.org (Postfix) with SMTP id 8C76C37B403 for ; Wed, 20 Jun 2001 03:57:32 -0700 (PDT) (envelope-from hmag@ozemail.com.au) Received: from [203.53.37.188] ([203.53.37.188] verified) by heard.com.au (Stalker SMTP Server 1.8b8) with ESMTP id S.0000018185 for ; Wed, 20 Jun 2001 20:57:32 +1000 X-Sender: hmag@pop.ozemail.com.au Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@freebsd.org From: Terry Allen Subject: Access via webmin Date: Wed, 20 Jun 2001 20:57:32 +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again, I did the make install of webmin & the machine couldn't find the webmin-0.86_2, so it doesn't look like it was there, but the machine automatically went & fetched the 0.85 & installed it, so once that had happened, I tried to access is via it's IP address on a web browser on another machine (i.e. http://xxx.xxx.xxx:10000), but the browser returned an error saying 'perhaps the server isn't accepting connections' As the machine was able to fetch the webmin tarball from the sourceforge server, it is obviously working on the network - can anyone perhaps shed some light here please? Bye for now, Terry Allen ___________________________________________________________________ hEARd Postal Address: hEARd c/o 128 The Entrance Rd The Entrance NSW 2261 Australia Internet - WWW: http://heard.com.au or http://www.ozemail.com.au/~hmag Interactive Message Board - http://heard.com.au/wwwboard/ EMAIL: (checked every Thursday & Sunday, sometimes more often) hmag@ozemail.com.au ---------------------------------- Non profit promotion for new music ---------------------------------- Also, check out the Educate site - http://www.educate.net.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4: 9:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mip.co.za (puck.mip.co.za [209.212.106.44]) by hub.freebsd.org (Postfix) with ESMTP id 9BA8137B401 for ; Wed, 20 Jun 2001 04:09:09 -0700 (PDT) (envelope-from patrick@mip.co.za) Received: from patrick (patrick.mip.co.za [10.3.13.181]) by mip.co.za (8.9.3/8.9.3) with SMTP id NAA58786; Wed, 20 Jun 2001 13:08:52 +0200 (SAST) (envelope-from patrick@mip.co.za) From: "Patrick O'Reilly" To: "Christopher Bush" , Subject: RE: I'm having some trouble with kernel configuration Date: Wed, 20 Jun 2001 13:09:04 +0200 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 In-Reply-To: <3B307D7B.6040104@home.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Christopher, I have built kernels only a few times (maybe 5 or 6 times), and my experience has been that there are some dependencies which are not documented in the GENERIC file, but which have caught me more than once. For example, I built a kernel for an old Pentium 200Mhz system which I am sure was built before PCMCIA existed, and which certainly does not have an PCMCIA device installed, yet the kernel would not build with the following lines exactly as you have them: --- # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable --- I tried to un-comment the "card" device, still no joy. Then uncommented all three lines and make was fine. I have no idea why - but that was my experience. Andy also replied saying you should include the line: --- # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support --- I have also found that miibus is referred by other devices, so now I always include it. At least the GENERIC kernel file comments hint that you should probably include it. I seem to recall also having difficulties when excluding some of the "ata" set of devices. Your config has: --- # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives --- You might want to try uncommenting the "ata0" and "ata1" lines. These comments are purely based on personal experience - I don't wish to pretend to understand exactly why some of these inter-dependencies exist. I hope you have more success. FreeBSD is my personal choice - give it some more time. :) Patrick. -----Original Message----- From:Christopher Bush Sent: 20 June 2001 12:40 To: freebsd-questions@FreeBSD.ORG Subject: I'm having some trouble with kernel configuration I seem to be doing something wrong while configuring my kernel. I've tried a few IRC rooms, but they keep telling me I should read the handbook. While the handbook seems to be a good source of information, either I must be illiterate, or what I'm looking for isn't there. I can configure the kernel. I don't get any error messages when I do. However, when I do a make depend, it gives me an error. I'm including my kernel configuration in hopes that maybe you'll be able to explain to me what I'm doing wrong. This is the first time I've tried to do configure and compile a kernel under FreeBSD. I've done so under Linux several times. I thought I'd try your OS, but from what I've seen in IRC, I'm supposed to be born with an understanding of it. Anyway, thanks in advance for any help. I appreciate it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4:17:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mip.co.za (puck.mip.co.za [209.212.106.44]) by hub.freebsd.org (Postfix) with ESMTP id 8680337B401 for ; Wed, 20 Jun 2001 04:17:28 -0700 (PDT) (envelope-from patrick@mip.co.za) Received: from patrick (patrick.mip.co.za [10.3.13.181]) by mip.co.za (8.9.3/8.9.3) with SMTP id NAA58987; Wed, 20 Jun 2001 13:16:44 +0200 (SAST) (envelope-from patrick@mip.co.za) From: "Patrick O'Reilly" To: "Joe Clarke" Cc: "FreeBSD Question List" Subject: RE: ipfw Date: Wed, 20 Jun 2001 13:16:56 +0200 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 In-Reply-To: <20010620014537.E9098-100000@shumai.marcuscom.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG And, while you are about it - you might want to include: options IPFIREWALL_FORWARD # Enable support for transparent proxying options DUMMYNET # Enable the Dummynet Traffic Shaping pipes options IPDIVERT # enable ipfw to divert to NAT, etc. Patrick. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Joe Clarke Sent: 20 June 2001 07:48 To: Brad McNeney Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ipfw Do you have options IPFIREWALL in the kernel, or the ipfw.ko module loaded? You need IPFIREWALL before you can have IPFIREWALL_VERBOSE. Joe Clarke On Tue, 19 Jun 2001, Brad McNeney wrote: > I'm having no luck using ipfw -- getting thingslike: > # ipfw -f flush > ipfw: setsockopt(IP_FW_FLUSH): Protocol not available > > or > # ipfw list > ipfw: getsockopt(IP_FW_GET): Protocol not available > > I built a 4.3-STABLE kernel with options IPFIREWALL_VERBOSE > and have set firewall_type="OPEN" in /etc/rc.conf. > > I'm sure I'm missing something obvious here... Any thoughts? > > Brad > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4:18: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay.tecc.co.uk (luggage.tecc.co.uk [193.128.6.129]) by hub.freebsd.org (Postfix) with SMTP id 8612537B408 for ; Wed, 20 Jun 2001 04:17:52 -0700 (PDT) (envelope-from andy@tecc.co.uk) Received: from southampton [195.217.37.155] by relay.tecc.co.uk with smtp (Exim 1.70 #1) id 15Cfza-0004fO-00; Wed, 20 Jun 2001 12:17:50 +0100 From: "Andy" To: "Patrick O'Reilly" , "Christopher Bush" , Subject: RE: I'm having some trouble with kernel configuration Date: Wed, 20 Jun 2001 12:17:50 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I have no idea why - but that was my experience. Andy also replied saying > you should include the line: > --- > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use > these NICs! > device miibus # MII bus support > --- > I have also found that miibus is referred by other devices, so > now I always > include it. At least the GENERIC kernel file comments hint that > you should > probably include it. Actually, when I ran "make depend" on his config on my machine it was "make depend" that told me to put it in, that was the error message missing from the original post. I put it in and why hey, off it went fine. Regards Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4:26:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (malkav.snowmoon.com [209.23.60.62]) by hub.freebsd.org (Postfix) with SMTP id C4E2237B401 for ; Wed, 20 Jun 2001 04:26:47 -0700 (PDT) (envelope-from jaime@snowmoon.com) Received: (qmail 21092 invoked from network); 20 Jun 2001 11:20:05 -0000 Received: from localhost.snowmoon.com (HELO localhost) (127.0.0.1) by localhost.snowmoon.com with SMTP; 20 Jun 2001 11:20:05 -0000 Date: Wed, 20 Jun 2001 07:20:05 -0400 (EDT) From: Jaime To: freebsd-questions@freebsd.org Subject: test Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG test -- does *this* one show up? Sorry for the clutter.... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4:55: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (malkav.snowmoon.com [209.23.60.62]) by hub.freebsd.org (Postfix) with SMTP id 56ED637B403 for ; Wed, 20 Jun 2001 04:55:02 -0700 (PDT) (envelope-from jaime@snowmoon.com) Received: (qmail 17796 invoked from network); 19 Jun 2001 10:55:00 -0000 Received: from localhost.snowmoon.com (HELO localhost) (127.0.0.1) by localhost.snowmoon.com with SMTP; 19 Jun 2001 10:55:00 -0000 Date: Tue, 19 Jun 2001 06:54:59 -0400 (EDT) From: Jaime To: john mitchell Cc: questions@freebsd.org Subject: Re: problem installing x In-Reply-To: <20010618211434.55025.qmail@web14005.mail.yahoo.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, john mitchell wrote: > I recently got FreeBSD 4.3 installed on the 2nd hard > drive of my Intel PC. After the install, I went back > to install Xwindows from the package list on the CD. > It seemed to allow me to install the X server and then > KDE, but when I type startx at a shell prompt, it > tells me it couldn't open the config file. Does this > ring a bell with anyone? How can I remedy this? Did you set up your /etc/XF86Config file? There are some config programs in /stand/sysinstall that can help if you didn't. Jaime -- "[A]s we enjoy great advantages from the inventions of others, we should be glad of an opportunity to serve others by any invention of ours; and this we should do freely and generously." -- Ben Franklin, http://earlyamerica.com/lives/franklin/chapt10/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 4:58:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (malkav.snowmoon.com [209.23.60.62]) by hub.freebsd.org (Postfix) with SMTP id E1FA037B403 for ; Wed, 20 Jun 2001 04:58:23 -0700 (PDT) (envelope-from jaime@snowmoon.com) Received: (qmail 17803 invoked from network); 19 Jun 2001 10:58:22 -0000 Received: from localhost.snowmoon.com (HELO localhost) (127.0.0.1) by localhost.snowmoon.com with SMTP; 19 Jun 2001 10:58:22 -0000 Date: Tue, 19 Jun 2001 06:58:22 -0400 (EDT) From: Jaime To: Parker Brown Cc: Tech Support Subject: Re: BSD Internet Access Over CableTV In-Reply-To: <3B2E6EBD.7E75B6FF@charter.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Parker Brown wrote: > My question is: before I go hacking through my configuration files, can > someone tell me if support for that kind of Internet connection exists > in BSD 4.3. Dmesg indicated that it located the Linksys UCB adaptor and > labelled it ugen0. Will I need to get a special driver? There is a large part of the picture missing from this description. Is this service Ethernet-over-USB? If so, do they use PPPoE? Find out what protocols manage the connection and people on the list will have a better chance of being able to answer you. Jaime -- "[A]s we enjoy great advantages from the inventions of others, we should be glad of an opportunity to serve others by any invention of ours; and this we should do freely and generously." -- Ben Franklin, http://earlyamerica.com/lives/franklin/chapt10/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 5: 0:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rannoch.demon.co.uk (rannoch.demon.co.uk [158.152.110.117]) by hub.freebsd.org (Postfix) with ESMTP id BB24C37B401 for ; Wed, 20 Jun 2001 05:00:47 -0700 (PDT) (envelope-from apbran@rannoch.demon.co.uk) Received: (from apb@localhost) by rannoch.demon.co.uk (8.11.4/8.10.1) id f5KBwHC03628; Wed, 20 Jun 2001 12:58:17 +0100 (BST) Date: Wed, 20 Jun 2001 12:58:13 +0100 From: Paul Branston To: Terry Allen Cc: freebsd-questions@freebsd.org Subject: Re: Access via webmin Message-ID: <20010620125813.G18978@rannoch.demon.co.uk> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from hmag@ozemail.com.au on Wed, Jun 20, 2001 at 08:57:32PM +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Not an answer because I know little about webmin, but some clues. Is webmin running ? There error message would indicate that no webserver was listening for connections on port 10000. Does webmin run all the time or does is start from inetd ? If the latter has the webmin install made an entry in inetd.conf, are you running inetd ?? On Wed, Jun 20, 2001 at 08:57:32PM +1000, Terry Allen wrote: > Hi again, > I did the make install of webmin & the machine couldn't find the > webmin-0.86_2, so it doesn't look like it was there, but the machine > automatically went & fetched the 0.85 & installed it, so once that had > happened, I tried to access is via it's IP address on a web browser on > another machine (i.e. http://xxx.xxx.xxx:10000), but the browser returned > an error saying 'perhaps the server isn't accepting connections' > As the machine was able to fetch the webmin tarball from the > sourceforge server, it is obviously working on the network - can anyone > perhaps shed some light here please? > > > Bye for now, Terry Allen > ___________________________________________________________________ > hEARd > > Postal Address: > hEARd > c/o 128 The Entrance Rd > The Entrance > NSW 2261 > Australia > > Internet - > WWW: > http://heard.com.au or http://www.ozemail.com.au/~hmag > > Interactive Message Board - http://heard.com.au/wwwboard/ > > EMAIL: (checked every Thursday & Sunday, sometimes more often) > hmag@ozemail.com.au > > ---------------------------------- > Non profit promotion for new music > ---------------------------------- > Also, check out the Educate site - http://www.educate.net.au > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 5: 8:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (malkav.snowmoon.com [209.23.60.62]) by hub.freebsd.org (Postfix) with SMTP id 76F7837B403 for ; Wed, 20 Jun 2001 05:08:34 -0700 (PDT) (envelope-from jaime@snowmoon.com) Received: (qmail 17831 invoked from network); 19 Jun 2001 11:08:32 -0000 Received: from localhost.snowmoon.com (HELO localhost) (127.0.0.1) by localhost.snowmoon.com with SMTP; 19 Jun 2001 11:08:32 -0000 Date: Tue, 19 Jun 2001 07:08:32 -0400 (EDT) From: Jaime To: Marius Cc: questions@FreeBSD.org Subject: Re: running out of buffer space for sockets In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 18 Jun 2001, Marius wrote: > One of my webservers is having an on-again, off-again problem with > networking. When the load gets up there (thttpd is pushing maybe 15MB > right now) I begin to run out of buffer space to create sockets. Heya old pal. :) Honestly, I think that looking at the kernel in this case is like rebuilding the foundation of a house when all that's needed is an extra layer of paint in the basement. You know, massive over kill. Look into your apache config files for something that will help. I found the following in mine: # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. For these platforms, set to something like 10000 # or so; a setting of 0 means unlimited. # # NOTE: This value does not include keepalive requests after the initial # request per connection. For example, if a child process handles # an initial request and 10 subsequent "keptalive" requests, it # would only count as 1 request towards this limit. # MaxRequestsPerChild 0 You should just tell apache to "recycle" child processes after they answer a certain number of requests. This will keep them from getting too big. Good luck, Jaime -- "[A]s we enjoy great advantages from the inventions of others, we should be glad of an opportunity to serve others by any invention of ours; and this we should do freely and generously." -- Ben Franklin, http://earlyamerica.com/lives/franklin/chapt10/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 5:18:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sanson.reyes.somos.net (freyes.static.inch.com [216.223.199.224]) by hub.freebsd.org (Postfix) with ESMTP id 3D38137B407 for ; Wed, 20 Jun 2001 05:18:13 -0700 (PDT) (envelope-from lists@natserv.com) Received: from zoraida.reyes.somos.net (zoraida.reyes.somos.net [192.168.10.6]) by sanson.reyes.somos.net (8.9.3/8.9.3) with ESMTP id IAA73176; Wed, 20 Jun 2001 08:18:58 -0400 (EDT) (envelope-from lists@natserv.com) Date: Wed, 20 Jun 2001 08:18:49 -0400 (EDT) From: Francisco Reyes X-X-Sender: To: Bill Moran Cc: Francisco Reyes , FreeBSD Questions List Subject: UDMA ICRC error (was How to troubleshoot freezing?) In-Reply-To: <3B2FE5CF.8ED52928@iowna.com> Message-ID: <20010620081519.Y448-100000@zoraida.reyes.somos.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 19 Jun 2001, Bill Moran wrote: > Francisco Reyes wrote: > > > Something may have gotten corrupted with the HD during all the problems. > > Now I am getting: > > > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) retrying > > > > ad0s1f: UDMA ICRC error reading fsbn 35802032 of 16724440-16724503 > > (ad0s1 bn 35802032; cn 7103 tn 46 sn 14) falling back to PIO mode > > This looks like something with the ata driver ... since it's dropping > out of DMA mode into PIO. Waht does "sysctl hw.atamodes" reveal? If the > mode for the HDD is PIO, you may have an incorrect cable. hw.atamodes: pio,---,dma,pio, What is the order: primary master, primary slave, secondary master, secondary slave? The cables are the same I used with the previous motherboard. I wonder if it is not an issue with the Motherboard. This motherboard comes with a CD which some kind of driver for the IDE channels. May be device drivers for windows so may not help FreeBSD. The motherboard is Iwill KK266. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Jun 20 5:20:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (malkav.snowmoon.com [209.23.60.62]) by hub.freebsd.org (Postfix) with SMTP id 8E70F37B401 for ; Wed, 20 Jun 2001 05:20:52 -0700 (PDT) (envelope-from jaime@snowmoon.com) Received: (qmail 17869 invoked from network); 19 Jun 2001 11:20:49 -0000 Received: from localhost.snowmoon.com (HELO localhost) (127.0.0.1) by localhost.snowmoon.com with SMTP; 19 Jun 2001 11:20:49 -0000 Date: Tue, 19 Jun 2001 07:20:49 -0400 (EDT) From: Jaime To: whisky Cc: questions@freebsd.org Subject: Re: Quotas Problem In-Reply-To: <002301c0f88f$e1fadda0$0100000a@whisky> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 19 Jun 2001, whisky wrote: > I setup group quotas via > # edquota -g groupinquestion > > and instead of setting the quota for every user in the group... This is what it is supposed to do. > # edquota -u username > and then the script edit the blocks/inodes (I suck at coding) If this is what you want, read the manual for edquota more closely. There is an option "-p" that will be useful to you. If you can do *any* coding, stick a call to this inside a look. For example, in perl: foreach (@users) { $cmd = "/usr/sbin/edquota -u -p $ARGV[1] $_"; system("$cmd"); print "."; } I found the following script lieing around in my utilities directory. I can't remember if it works or not, but feel free to try it. #!/usr/bin/perl # #The purpose of this script is to read a file full of usernames, #one username per line, and set all of their disk quotas to be #the same as that of one specific user. # if ((!($ARGV[0])) || (!($ARGV[1]))) { die "$0