From owner-freebsd-questions Sun Dec 23 0:21:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rush.telenordia.se (mail.telenordia.se [194.213.64.42]) by hub.freebsd.org (Postfix) with SMTP id 150A937B416 for ; Sun, 23 Dec 2001 00:21:10 -0800 (PST) Received: (qmail 25386 invoked from network); 23 Dec 2001 09:21:07 +0100 Received: from bb-62-5-36-29.bb.tninet.se (HELO there) (62.5.36.29) by mail.telenordia.se with SMTP; 23 Dec 2001 09:21:07 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: "Andy" , Subject: Re: Q regarding booting from Mylex acceleraid170 Date: Sun, 23 Dec 2001 09:22:02 +0100 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011223082110.150A937B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wednesday 12 December 2001 4:38 pm, Andy wrote: > Hi All > > I have a Dell Poweredge 2550 with on board SCSI 7899 controller. > That controller is not actually fitted to any drives, only the > tape unit (DDS3). > > I actually have a Mylex Acceleraid170 board attached to the four > Scsi drives creating a single drive volume. All seems to work fine > but the boot up is painfully slow, for example:- > > > /kernel: acd0: CDROM at ata0-master using PIO4 > /kernel: Waiting 3 seconds for SCSI devices to settle > > [Wait 2.5 minutes here, then] > > /kernel: mly0: physical device 0:6 sense data received > /kernel: mly0: sense key 5 asc 00 ascq 00 > /kernel: mly0: info 00000000 csi 00000000 > > [Wait a further 3 minutes here, then] > > /kernel: mly0: enclosure 6 unit 0 access offline > Mounting root from ufs:/dev/da0s1a > > [Wait a further 2 minutes here then] > > /kernel: da0 at mly0 bus 1 target 0 lun 0 > /kernel: da0: Fixed Direct Access SCSI-3 device > /kernel: da0: 135.168MB/s transfers > /kernel: da0: 34688MB (71041024 512 byte sectors: 255H 63S/T 4422C) > > [booting continues normally from here] > > Anyone any idea why this is all so slow? Not complaining too > much since it works but I can't help thinking I've done something > wrong because of this. > > fyi I'm running 4-STABLE [as of 12/12/2001] and it happens with both > GENERIC and my custom kernel. Before going to STABLE I installed R4.3 > from CDRom and it did the same there also (GENERIC and custom). have you any unconfigured disks attached? -- There are many people today who literally do not have a close personal friend. They may know something that we don't. They are probably avoiding a great deal of pain. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 0:36:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from parhelion.firedrake.org (parhelion.firedrake.org [212.135.138.219]) by hub.freebsd.org (Postfix) with ESMTP id 6AE4C37B405 for ; Sun, 23 Dec 2001 00:36:18 -0800 (PST) Received: from float by parhelion.firedrake.org with local (Exim 3.32 #1 (Debian)) id 16I47E-0000Mb-00; Sun, 23 Dec 2001 08:36:16 +0000 Date: Sun, 23 Dec 2001 08:36:16 +0000 To: Ron Hensley Cc: questions@FreeBSD.ORG Subject: Re: top output -- what's going on here? Message-ID: <20011223083616.A1381@parhelion.firedrake.org> References: <20011223063011.A30966@parhelion.firedrake.org> <004301c18b84$a83787c0$0273150a@woodstock.lanalyse.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <004301c18b84$a83787c0$0273150a@woodstock.lanalyse.com> User-Agent: Mutt/1.3.23i From: void Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I was running top with "-I", meaning I told it not to show me idle processes. Sorry, I should have mentioned this in the original mail. On Sun, Dec 23, 2001 at 02:37:16AM -0500, Ron Hensley wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Note it says 73 processes running. Top is only showing you 6 processes > there, generally 10 at most in the default interactive mode. Run it in batch > mode and tell it to show you like 75 processes so you see all 73 > #top -b 75 > > - ----- Original Message ----- > From: "void" > To: > Sent: Sunday, December 23, 2001 1:30 AM > Subject: top output -- what's going on here? > > > > Top is telling me that 56.6% of my CPU is in use, but the WCPU and > > CPU columns both add up to under 2%. What's the reason for this > > inconsistency? > > > > last pid: 97907; load averages: 3.90, 3.78, 2.17 up 0+00:27:44 > 01:26:15 > > 73 processes: 4 running, 43 sleeping, 26 stopped > > CPU states: 56.6% user, 0.0% nice, 43.4% system, 0.0% interrupt, 0.0% > idle > > Mem: 37M Active, 56M Inact, 19M Wired, 8980K Cache, 22M Buf, 1280K Free > > Swap: 401M Total, 1296K Used, 400M Free, 48K Out > > > > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND > > 11777 root -6 0 2456K 1836K piperd 0:05 1.07% 1.07% ruby16 > > 94954 root 2 0 828K 668K select 0:00 0.50% 0.20% make > > 257 ben 28 0 1540K 1040K RUN 0:06 0.00% 0.00% top > > 97905 root 60 0 476K 336K RUN 0:00 0.00% 0.00% make > > 97907 root 60 0 632K 332K RUN 0:00 0.00% 0.00% sh > > 97906 root 60 0 612K 296K RUN 0:00 0.00% 0.00% sh > > > > -- > > Ben > > > > "An art scene of delight > > I created this to be ..." -- Sun Ra > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > -----BEGIN PGP SIGNATURE----- > Version: PGPfreeware 6.5.8 for non-commercial use > > iQA/AwUBPCWJqlFb04N5DzUjEQIYBgCgjJ9mI26ZiH4DDvcpKXL3oX0qjFsAoM9W > FZP6G1Cyzs9fyG1+2avE4UYV > =sNOc > -----END PGP SIGNATURE----- > > -- Ben "An art scene of delight I created this to be ..." -- Sun Ra To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 0:46:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mxzilla2.xs4all.nl (mxzilla2.xs4all.nl [194.109.6.50]) by hub.freebsd.org (Postfix) with ESMTP id 7BF4A37B405 for ; Sun, 23 Dec 2001 00:46:51 -0800 (PST) Received: from xs4.xs4all.nl (rene@xs4.xs4all.nl [194.109.6.45]) by mxzilla2.xs4all.nl (8.12.0/8.12.0) with ESMTP id fBN8koxm084192 for ; Sun, 23 Dec 2001 09:46:50 +0100 (CET) Received: (from rene@localhost) by xs4.xs4all.nl (8.9.0/8.9.0) id JAA11638 for questions@freebsd.org; Sun, 23 Dec 2001 09:46:49 +0100 (CET) Date: Sun, 23 Dec 2001 09:46:49 +0100 From: rene@xs4all.nl To: questions@freebsd.org Subject: SANE homepage mirror? Message-ID: <20011223094649.A21241@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG http://www.mostang.com has been down for over a day now... :( If you've got a mirror of the SANE homepage lying around, could you please email me the URL to it? ...hoping ;) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 0:48: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rush.telenordia.se (mail.telenordia.se [194.213.64.42]) by hub.freebsd.org (Postfix) with SMTP id 3F03737B419 for ; Sun, 23 Dec 2001 00:48:04 -0800 (PST) Received: (qmail 6263 invoked from network); 23 Dec 2001 09:48:02 +0100 Received: from bb-62-5-36-29.bb.tninet.se (HELO there) (62.5.36.29) by mail.telenordia.se with SMTP; 23 Dec 2001 09:48:02 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Lord Raiden , freebsd-questions@FreeBSD.ORG Subject: Re: Terminal Services for BSD? Date: Sun, 23 Dec 2001 09:48:56 +0100 X-Mailer: KMail [version 1.3.2] References: <4.2.0.58.20011214092110.0097a7e0@pop.netzero.net> In-Reply-To: <4.2.0.58.20011214092110.0097a7e0@pop.netzero.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011223084804.3F03737B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday 14 December 2001 3:23 pm, Lord Raiden wrote: > Just curious, but I know that Win2k, and XP both have the Terminal > Services client on them so that someone can work on a given workstation > from a remote location, kinda like a simplified version of PC > anywhere. But does BSD or unix in general have anything like that for the > shell/Xwindow environment? I'm in no need of such a thing just yet, but I > thought it would be neat if it was available. And if it is, does it > provide SSH security? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message and if you are running in a primarily windows environment, you might want to take a look at mindterm (java terminal client) which has neat ssh (and other) tunnelling facilities (works very well with vnc) - Real computer scientists despise the idea of actual hardware. Hardware has limitations, software doesn't. It's a real shame that Turing machines are so poor at I/O. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 2: 1:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from antares.surnet.ru (antares.surnet.ru [195.54.2.5]) by hub.freebsd.org (Postfix) with ESMTP id 028DC37B405; Sun, 23 Dec 2001 02:01:01 -0800 (PST) Received: (from uucp@localhost) by antares.surnet.ru (8.11.6/Joy) with UUCP id fBNA0uI87502; Sun, 23 Dec 2001 15:00:56 +0500 (YEKT) X-Authentication-Warning: antares.surnet.ru: uucp set sender to ilia@chel.skbkontur.ru using -f Received: from localhost (localhost.chel.skbkontur.ru [127.0.0.1]) by sol.chel.skbkontur.ru (8.11.6/8.11.6) with ESMTP id fBN9hqd02365 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sun, 23 Dec 2001 14:43:53 +0500 (YEKT) (envelope-from ilia@chel.skbkontur.ru) Date: Sun, 23 Dec 2001 14:43:52 +0500 (YEKT) From: =?koi8-r?B?6czY0SD7ydDJw8nO?= To: ports@freebsd.org Cc: questions@freebsd.org Subject: numerous IMAP questions... Message-ID: <20011223144012.T713-100000@sol.chel.skbkontur.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, 1) is there an alternative for imap-uw ? 2) how to make imap-uw more verbose ? 3) how to run imap-uw without inetd ? 4) do I really need an "mbox" driver ? (I permanently see "moved XXX bytes from mbox..." and "moved XXX bytes to mbox...") 5) how to compile imap-uw without "mbox" driver ? Regards, (=EE=C1=C9=CC=D5=DE=DB=C9=C5 =D0=CF=D6=C5=CC=C1=CE=C9=D1) Ilia Chipitsine (=E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 3:29:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id 90DF837B405 for ; Sun, 23 Dec 2001 03:29:36 -0800 (PST) Received: from trittico.fiddi.com ([12.228.145.237]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20011223112936.CRLL19716.rwcrmhc51.attbi.com@trittico.fiddi.com> for ; Sun, 23 Dec 2001 11:29:36 +0000 Date: Sun, 23 Dec 2001 03:29:36 -0800 (PST) From: Dave Runkle X-X-Sender: dave@trittico.fiddi.com To: freebsd-questions@FreeBSD.ORG Subject: Cannot boot single; no verbose details at boot In-Reply-To: <20011222142945.L5178-100000@catalyst.sasknow.net> Message-ID: <20011223031552.L6815-100000@trittico.fiddi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Unusual, also can't find anything similar at the Marc archives. This is a new build, halfway through. I've built current sources, built and installed new kernel. Now I cannot go into single to install new sources. No problems at all, running multi-. Just can't get into single. Tried 'boot -s' at initial choice, also tried 'boot_single="YES"' in /boot/loader.conf. No luck. Last build, about 10 days ago, allowed me to get into single to install sources but both that build and this one would display no boot details. Just this: /boot/kernel/kernel text=0x1b1da4 data=0x3828c+0x52d68 \(sameline) syms=[0x4+0x30b10+0x4+0x3b481] | (<-this doesn't revolve) then into the login prompt. This is /boot/loader.conf that I tried: boot_single="YES" boot_verbose="YES" Even though I get no details at boot, dmesg works just fine and is up-to-date. $ uname -a ( <-- formatted for mail) FreeBSD trittico.fiddi.com 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Fri Dec 21 16:20:39 PST 2001 root@trittico.fiddi.com:/usr/obj/usr/src/sys/TRITTICO i386 So where do I explore? I've read manpages, searched google/bsd, the faq & handbook, of course. Should I look into what I might have config'd into my kernel? Maybe I should try to boot GENERIC? (Yeah I'll try that, but I still want to run my kernel with the options that I've added.) Any hints on what to explore would be very appreciated. Thanks, Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 3:41:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.bellavista.cl (mail.bellavista.cl [200.27.182.67]) by hub.freebsd.org (Postfix) with ESMTP id 5EC7737B41A; Sun, 23 Dec 2001 03:41:30 -0800 (PST) Received: from cpimssmtpa01.msn.com=1 (0-1pool67-68.nas1.houston2.tx.us.da.qwest.net [63.232.67.68]) by mail.bellavista.cl with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id ZCNBV2FH; Sun, 23 Dec 2001 08:43:51 -0400 Message-ID: <000076e27550$00004694$000024aa@cpimssmtpa01.msn.com=1> To: From: teeniesuckathon324v4@msn.com Subject: FREE XXX WILD SEX R Date: Sat, 22 Dec 2001 05:36:16 -2000 MIME-Version: 1.0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG
 

Do not reply to this e-mail message

To= be taken off this list please go to the link below and enter your e-mail ad= dress.
"Under Bill s.1618 TITLE III passed by the 105th US Congress = this letter
cannot be considered Spam as long as the sender includes contact <= br> information and a method of removal."
WE HONOR ALL REMOVES. PLEASE SUBMIT ONE EMAIL AT A TIME OTHERWISE = YOU WILL NOT BE REMOVED. PROFANITY SERVES NO PURPOSE.

Pl= ease allow for 24-72 hours to be removed from this list.


TO BE TAKE N OFF THIS LIST CLICK HERE
To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 3:52:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from finch-post-12.mail.demon.net (finch-post-12.mail.demon.net [194.217.242.41]) by hub.freebsd.org (Postfix) with ESMTP id 11E7137B405 for ; Sun, 23 Dec 2001 03:52:14 -0800 (PST) Received: from caomhin.demon.co.uk ([212.228.234.119]) by finch-post-12.mail.demon.net with esmtp (Exim 2.12 #1) id 16I7Ap-000PZe-0C for freebsd-questions@freebsd.org; Sun, 23 Dec 2001 11:52:12 +0000 Message-ID: Date: Sun, 23 Dec 2001 11:50:35 +0000 To: freebsd-questions@freebsd.org From: Kevin Golding Subject: mod_php4 on 4.5-PRERELEASE build woes MIME-Version: 1.0 X-Mailer: Turnpike Integrated Version 5.01 U Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just upgraded a machine using sources from Thursday, and upon trying to install mod_php4, (I selected support for GD and XML) I received this error: ===> Extracting for mod_php4-4.1.0 >> Checksum OK for php-4.1.0.tar.gz. ===> mod_php4-4.1.0 depends on file: /usr/local/sbin/apxs - found ===> mod_php4-4.1.0 depends on executable: autoconf213 - found ===> mod_php4-4.1.0 depends on shared library: gd.2 - found ===> mod_php4-4.1.0 depends on shared library: freetype.7 - found ===> mod_php4-4.1.0 depends on shared library: png.5 - found ===> mod_php4-4.1.0 depends on shared library: jpeg.9 - found ===> mod_php4-4.1.0 depends on shared library: mysqlclient.10 - found ===> mod_php4-4.1.0 depends on shared library: expat.2 - not found ===> Verifying install for expat.2 in /usr/ports/textproc/expat2 >> expat-1.95.2.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> Attempting to fetch from http://prdownloads.sourceforge.net/expat/. Receiving expat-1.95.2.tar.gz (190316 bytes): 100% 190316 bytes transferred in 0.5 seconds (401.08 kBps) ===> Extracting for expat-1.95.2 >> Checksum OK for expat-1.95.2.tar.gz. ===> expat-1.95.2 depends on executable: gmake - found ===> expat-1.95.2 depends on executable: libtool - found ===> Patching for expat-1.95.2 ===> Configuring for expat-1.95.2 creating cache ./config.cache checking host system type... i386--freebsd4.5 checking build system type... i386--freebsd4.5 checking for ranlib... ranlib checking for gcc... cc checking whether the C compiler (cc -O -pipe ) works... yes checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether cc accepts -g... yes checking for ld used by GCC... /usr/libexec/elf/ld checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes updating cache ./config.cache /usr/local/share/libtool/ltconfig: Can't open /usr/local/share/libtool/l tconfig: No such file or directory configure: error: libtool configure failed ===> Script "configure" failed: here are the contents of "config.log" This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. configure:648: checking host system type configure:669: checking build system type configure:689: checking for ranlib configure:719: checking for gcc configure:832: checking whether the C compiler (cc -O -pipe ) works configure:848: cc -o conftest -O -pipe conftest.c 1>&5 configure:874: checking whether the C compiler (cc -O -pipe ) is a cross-compil er configure:879: checking whether we are using GNU C configure:888: cc -E conftest.c configure:907: checking whether cc accepts -g configure:950: checking for ld used by GCC configure:1012: checking if the linker (/usr/libexec/elf/ld) is GNU ld GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 [FreeBSD]) configure:1028: checking for BSD-compatible nm configure:1064: checking whether ln -s works (end of "config.log") *** Error code 1 Stop in /usr/ports/textproc/expat2. *** Error code 1 As may be expected when I tried again with the basic configs it all went lovely, but I would like to install extra features if possible so a clue would be appreciated. Kevin -- kevin@caomhin.demon.co.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 3:59:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc52.attbi.com (rwcrmhc52.attbi.com [216.148.227.88]) by hub.freebsd.org (Postfix) with ESMTP id 1A1F537B416 for ; Sun, 23 Dec 2001 03:59:43 -0800 (PST) Received: from trittico.fiddi.com ([12.228.145.237]) by rwcrmhc52.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20011223115942.BQQF6450.rwcrmhc52.attbi.com@trittico.fiddi.com> for ; Sun, 23 Dec 2001 11:59:42 +0000 Date: Sun, 23 Dec 2001 03:59:42 -0800 (PST) From: Dave Runkle X-X-Sender: dave@trittico.fiddi.com To: freebsd-questions@FreeBSD.ORG Subject: Re: Cannot boot single; no verbose details at boot In-Reply-To: <20011223031552.L6815-100000@trittico.fiddi.com> Message-ID: <20011223035612.A228-100000@trittico.fiddi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I figured it out! I was too aggressive in editing unused entries out of /boot/device.hints. I removed: hint.sc.0.at="isa" hint.sc.0.flags="0x100" so, I added them back and now it is just fine. Thank you and sorry for the false alarm - just not quite enough troubleshooting before asking for help. Thanks, Dave -- FreeBSD 5.0-CURRENT 3:56AM up 1 min, 1 user, load averages: 0.29, 0.12, 0.05 On Sun, 23 Dec 2001, Dave Runkle wrote: > Unusual, also can't find anything similar at the Marc archives. This > is a new build, halfway through. I've built current sources, built > and installed new kernel. Now I cannot go into single to install new > sources. > > No problems at all, running multi-. Just can't get into single. > Tried 'boot -s' at initial choice, also tried 'boot_single="YES"' in > /boot/loader.conf. No luck. > > Last build, about 10 days ago, allowed me to get into single to > install sources but both that build and this one would display no > boot details. Just this: > > /boot/kernel/kernel text=0x1b1da4 data=0x3828c+0x52d68 \(sameline) > syms=[0x4+0x30b10+0x4+0x3b481] > | (<-this doesn't revolve) > > then into the login prompt. > > This is /boot/loader.conf that I tried: > boot_single="YES" > boot_verbose="YES" > > Even though I get no details at boot, dmesg works just fine and is > up-to-date. > > $ uname -a ( <-- formatted for mail) > FreeBSD trittico.fiddi.com 5.0-CURRENT FreeBSD 5.0-CURRENT #0: > Fri Dec 21 16:20:39 PST 2001 > root@trittico.fiddi.com:/usr/obj/usr/src/sys/TRITTICO i386 > > So where do I explore? I've read manpages, searched google/bsd, the > faq & handbook, of course. > > Should I look into what I might have config'd into my kernel? > Maybe I should try to boot GENERIC? (Yeah I'll try that, but I still > want to run my kernel with the options that I've added.) > > Any hints on what to explore would be very appreciated. > > Thanks, > Dave > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 4:23:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout10.sul.t-online.com (mailout10.sul.t-online.com [194.25.134.21]) by hub.freebsd.org (Postfix) with ESMTP id 24A3937B416 for ; Sun, 23 Dec 2001 04:23:19 -0800 (PST) Received: from fwd09.sul.t-online.de by mailout10.sul.t-online.de with smtp id 16I7ew-0007yR-00; Sun, 23 Dec 2001 13:23:18 +0100 Received: from earth.. (520042712742-0001@[80.133.149.68]) by fwd09.sul.t-online.com with smtp id 16I7ep-2BmrLcC; Sun, 23 Dec 2001 13:23:11 +0100 From: morten.gulbrandsen@t-online.de (Morten Gulbrandsen) To: freebsd-questions@freebsd.org Subject: kmail Date: Sun, 23 Dec 2001 13:07:02 +0000 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <01122313243300.00350@earth..> Content-Transfer-Encoding: 8bit X-Sender: 520042712742-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a problem with my kmail 1.0.28 The mail I send will sometimes reach the recipient, and sometimes not. and it woun't appear in the send mail directory. also the dates are wrong. bash-2.04$ date Sun Dec 23 13:10:48 GMT 2001 so my system time is correct. I can read mails from all my email accounts, but replying has a malfunction. Netscape is ok, so I could read my mails with kmail, and reply with netscape, But I would prefer too select kmail, if it is possible to make it run stable. It performed well, untill i started to make deinstall and make reinstall from some /usr/ports/print/ and /usr/ports/textproc/ applications. Also I changed modem to ADSL. I would prefer to continue to use KDE, from FreeBSD 4.2 KDE Version 1.1.2 and kmail 1.0.28 but I think we shoul start with the kmail prerequisites. First problem : I go to help contents and find cannot open: /usr/ local/ share/ doc/ HTML/ default/ kmail/ index.html yours sincerely Morten Gulbrandsen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 4:41:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rush.telenordia.se (mail.telenordia.se [194.213.64.42]) by hub.freebsd.org (Postfix) with SMTP id 902BA37B405 for ; Sun, 23 Dec 2001 04:41:19 -0800 (PST) Received: (qmail 9990 invoked from network); 23 Dec 2001 13:41:18 +0100 Received: from bb-62-5-36-29.bb.tninet.se (HELO there) (62.5.36.29) by mail.telenordia.se with SMTP; 23 Dec 2001 13:41:18 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Martin Karlsson Subject: Re: "private" DNS by-passing my ISPs? (Was: Re: /etc/hosts...) Date: Sun, 23 Dec 2001 13:42:13 +0100 X-Mailer: KMail [version 1.3.2] Cc: freebsd-questions References: <20011217134638.A4572@foo31-249.visit.se> <20011217143137.A13740@foo31-249.visit.se> In-Reply-To: <20011217143137.A13740@foo31-249.visit.se> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011223124119.902BA37B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 17 December 2001 2:31 pm, Martin Karlsson wrote: > On Mon Dec 17, 2001 at 01:05:01PM +0000, Jan Grant wrote: > > That depends. Good, innit? In this case, it depends on whether your ISP > > is filtering/intercepting DNS traffic. If they've got problems keeping > > their own DNS running, then that may be unlikely. > > "That depends" is a phrase which fills my heart with sunshine.. ;-) > > > You just need to set up a caching nameserver. > > OK. I got an off-list reply suggesting I'd add some often visited/used > servers to /etc/hosts, and I think I'll do that while looking into > setting up a cahing nameserver. > > Any particular pitfalls I should avoid when setting one up? A link to a > good tutorial? Everything is welcome... > http://www.sendmail.org/tips/private-dns/ is quite a good little tip as well To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 4:44: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rush.telenordia.se (mail.telenordia.se [194.213.64.42]) by hub.freebsd.org (Postfix) with SMTP id 8881537B416 for ; Sun, 23 Dec 2001 04:43:50 -0800 (PST) Received: (qmail 10947 invoked from network); 23 Dec 2001 13:43:43 +0100 Received: from bb-62-5-36-29.bb.tninet.se (HELO there) (62.5.36.29) by mail.telenordia.se with SMTP; 23 Dec 2001 13:43:43 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Francisco Reyes , FreeBSD Questions List Subject: Re: Automating multiple file transfers with FTP Date: Sun, 23 Dec 2001 13:44:38 +0100 X-Mailer: KMail [version 1.3.2] References: <20011221102106.K10298-100000@zoraida.natserv.net> In-Reply-To: <20011221102106.K10298-100000@zoraida.natserv.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011223124350.8881537B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday 21 December 2001 4:32 pm, Francisco Reyes wrote: > Any hints on how I can automate multiple file transfers with FTP > using a valid user/password? > > The FTP man page talks about "AUTO-FETCHING FILES", but I couldn't get > that to work for multiple files. I tried the "ftp > ftp://user:password@host/file" format and that worked only for single > files. I tried putting different files at the end, but only the file right > after the host worked : > "host/" > > I did get the following to work: > ftp ftp://user:password@host/directory > Having ftp.script with something like: > ascii > prompt > mget *.txt > > Is this the only/best way to do this? > I like lftp > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Mos Eisley Spaceport; you'll not find a more wretched collection of villainy and disreputable types... -- Obi-wan Kenobi, "Star Wars" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 4:47:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from castor.email.si (mail.email.si [193.77.122.6]) by hub.freebsd.org (Postfix) with ESMTP id E75CE37B405 for ; Sun, 23 Dec 2001 04:47:25 -0800 (PST) Received: from earth (node.066-0.ty.link.si [213.250.43.66]) by castor.email.si (8.11.1/8.11.1) with SMTP id fBNClLi11617 for ; Sun, 23 Dec 2001 13:47:21 +0100 Message-ID: <003401c18baf$f5bd8320$0200a8c0@earth> From: "FreeBSD" To: "FreeBSD Questions" Subject: Lame server (Named.log) Date: Sun, 23 Dec 2001 13:45:33 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dec 23 12:56:19 XXX named[2274]: Lame server on '4.3.2.1.in-addr.arpa' (in '3.2.1.IN-ADDR.ARPA'?): [111.112.113.114].53 'name.domain.com' This is not for my log, but from other server which i have access to. I don't know what this (lame server) means and 1.2.3.4 is my IP and name.domain.com is some name server. There are many lines like this with different IPs and different name servers at the end. Is there a problem on my server? How to fix this, if this is a problem. Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:10: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pogo.caustic.org (caustic.org [64.163.147.186]) by hub.freebsd.org (Postfix) with ESMTP id B777E37B419; Sun, 23 Dec 2001 05:09:52 -0800 (PST) Received: from localhost (jan@localhost) by pogo.caustic.org (8.11.6/8.11.6) with ESMTP id fBND9dS24118; Sun, 23 Dec 2001 05:09:40 -0800 (PST) (envelope-from jan@caustic.org) Date: Sun, 23 Dec 2001 05:09:39 -0800 (PST) From: "f.johan.beisser" X-X-Sender: To: =?koi8-r?B?6czY0SD7ydDJw8nO?= Cc: , Subject: Re: numerous IMAP questions... In-Reply-To: <20011223144012.T713-100000@sol.chel.skbkontur.ru> Message-ID: <20011223050601.K16958-100000@localhost> X-Ignore: This statement isn't supposed to be read by you X-TO-THE-FBI-CIA-AND-NSA: HI! HOW YA DOIN? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001, [koi8-r] =E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE wrote: > Well, > > 1) is there an alternative for imap-uw ? cd /usr/ports/mail/ make search key=3Dimap Port: courier-imap-1.3.12 Path: /usr/ports/mail/courier-imap Info: IMAP (and POP3) server that provides access to Maildir mailboxes Maint: nbm@FreeBSD.org Index: mail ipv6 B-deps: gettext-0.10.35 gmake-3.79.1 R-deps: Port: cyrus-1.6.24_2 Path: /usr/ports/mail/cyrus Info: The cyrus mail server, supporting POP3, KPOP, and IMAP4 protocols Maint: ports@FreeBSD.org Index: mail tcl82 B-deps: cyrus-sasl-1.5.24_7 makedepend-2000.12.28 tcl-8.2.3_1 R-deps: tcl-8.2.3_1 Port: cyrus-imapd-2.0.16_1 Path: /usr/ports/mail/cyrus-imapd Info: The cyrus mail server, supporting POP3 and IMAP4 protocols Maint: ume@FreeBSD.org Index: mail ipv6 B-deps: cyrus-sasl-1.5.24_7 db3-3.2.9_2,1 makedepend-2000.12.28 R-deps: cyrus-sasl-1.5.24_7 db3-3.2.9_2,1 so, yeah. > 2) how to make imap-uw more verbose ? read the documentation. maybe with a '-v' flag? > 3) how to run imap-uw without inetd ? that may not be possable. check the documentation. > 4) do I really need an "mbox" driver ? > (I permanently see "moved XXX bytes from mbox..." and > "moved XXX bytes to mbox...") you may be able to use Maildir. i personally prefer mbox > 5) how to compile imap-uw without "mbox" driver ? compile it by hand, i suspect. -------/ f. johan beisser /--------------------------------------+ http://caustic.org/~jan jan@caustic.org "John Ashcroft is really just the reanimated corpse of J. Edgar Hoover." -- Tim Triche To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:32: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id F1E5737B416 for ; Sun, 23 Dec 2001 05:31:51 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.24]) by services.webwarrior.net (Postfix) with ESMTP id 1900F4AC for ; Sun, 23 Dec 2001 07:31:31 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 2C0A5386E; Sun, 23 Dec 2001 07:31:03 +0000 (GMT) Date: Sun, 23 Dec 2001 07:31:03 +0000 From: Josh Paetzel To: "Jason A. Corley" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Machine reboots every time I try to configure XFree86 Message-ID: <20011223073102.A227@twincat.vladsempire.net> Mail-Followup-To: "Jason A. Corley" , freebsd-questions@FreeBSD.ORG References: <3C24CD52.328CA398@nc.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C24CD52.328CA398@nc.rr.com>; from jcorley1@nc.rr.com on Sat, Dec 22, 2001 at 01:13:38PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 22, 2001 at 01:13:38PM -0500, Jason A. Corley wrote: > Hi, > I'm running FreeBSD 4.5-PRERELEASE (cvsuped from source this morning). > Every time I try to run XFree86 -configure my machine reboots. I get > the same behavior if I write a config file and place it in > /etc/X11/XF86Config. Pretty much any time I try to do anything with > X the machine reboots. I have an Athlon 1.2 GHz with 1.5 GB of RAM and > my video card is an AGP Matrox G450 with 32 MB of RAM. The machine is a > Compaq. I've loaded the agp module at boot time by adding > agp_enable="YES" to my /boot/loader.conf and manually created the > agpgart device using sh MAKEDEV agpgart. I see no message to my screen > after I try to run startx, XFree86 -configure, etc., but when the > machine reboots I do see this in dmesg: > > kernel trap 9 with interrupts disabled > Fatal trap 9: general protection fault while in kernel mode > instruction pointer = 0x8:0xc02a351b > stack pointer = 0x10:0xec887cf0 > frame pointer = 0x10:0xec887d10 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = resume, IOPL = 3 > current process = 152 (XFree86) > interrupt mask = none > trap number = 9 > panic: general protection fault > syncing disks... 5 1 > done > Uptime: 2m36s > Automatic reboot in 15 seconds - press a key on the console to abort > --> Press a key on the console to reboot <-- > Rebooting... > > Any help would be greatly appreciated. > Thanks, > Jason Is there any way you can try different ram or video card in the system? Smells suspiciously like flakey hardware to me. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:32:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 8440837B416 for ; Sun, 23 Dec 2001 05:32:53 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id 2A95C8052; Sun, 23 Dec 2001 14:32:52 +0100 (MET) To: freebsd-questions@freebsd.org Subject: Message-ID: <1009114372.3c25dd041de76@mail.broadpark.no> Date: Sun, 23 Dec 2001 14:32:52 +0100 (MET) From: johann@broadpark.no MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG For any daemon to work on my static NAT-based ADSL connection, a port redirection entry of the daemon's port (range) on my ADSL router-modem is required. I recently wanted DCC (Irssi) and passive FTP mode (ProFTPD) to work on my FreeBSD 4.4-STABLE box. Thus, I added an entry for the IANA-registered ephemeral port range (49152-65535), as well as setting the PassivePorts directive in ProFTPD to match. It's also weird, because whenever I recieve a DCC connection, it goes to something like port 4384. And if I request one, the user sees it coming from 10.0.0.1 (my router-modem). By the way, I'm not running NATD. Well, I hope someone knows the answer to my problem. Cheerio! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:34:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from SRDMAIL.SINP.MSU.RU (bigking.sinp.msu.ru [213.131.9.130]) by hub.freebsd.org (Postfix) with ESMTP id 6537737B416 for ; Sun, 23 Dec 2001 05:34:45 -0800 (PST) Received: from dima (helo=localhost) by SRDMAIL.SINP.MSU.RU with local-esmtp (Exim 3.33 #3) id 16I8l1-000I9p-00 for freebsd-questions@FreeBSD.org; Sun, 23 Dec 2001 16:33:39 +0300 Date: Sun, 23 Dec 2001 16:33:39 +0300 (MSK) From: Dmitry Mottl To: freebsd-questions@FreeBSD.org Subject: openssl Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, All! What's the difference between cvsuped /usr/src/crypto/openssl and /usr/ports/security/openssl? Why /usr/ports/security/openssl is version 0.9.6c and usr/src/crypto/openssl is version 0.9.6a? Thank You! -- Dmirty Mottl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:35:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 823C837B422 for ; Sun, 23 Dec 2001 05:35:10 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id 51B608030; Sun, 23 Dec 2001 14:35:09 +0100 (MET) To: freebsd-questions@freebsd.org Subject: Oops, I forgot a subject on my previous e-mail: ``Firewall problems?'' Message-ID: <1009114509.3c25dd8d44f93@mail.broadpark.no> Date: Sun, 23 Dec 2001 14:35:09 +0100 (MET) From: johann@broadpark.no MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:42:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pogo.caustic.org (caustic.org [64.163.147.186]) by hub.freebsd.org (Postfix) with ESMTP id 0221D37B405 for ; Sun, 23 Dec 2001 05:42:10 -0800 (PST) Received: from localhost (jan@localhost) by pogo.caustic.org (8.11.6/8.11.6) with ESMTP id fBNDg3C24218; Sun, 23 Dec 2001 05:42:03 -0800 (PST) (envelope-from jan@caustic.org) Date: Sun, 23 Dec 2001 05:42:03 -0800 (PST) From: "f.johan.beisser" X-X-Sender: To: Dmitry Mottl Cc: Subject: Re: openssl In-Reply-To: Message-ID: <20011223054002.V16958-100000@localhost> X-Ignore: This statement isn't supposed to be read by you X-TO-THE-FBI-CIA-AND-NSA: HI! HOW YA DOIN? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001, Dmitry Mottl wrote: > Hi, All! > > What's the difference between cvsuped /usr/src/crypto/openssl and > /usr/ports/security/openssl? > > Why /usr/ports/security/openssl is version 0.9.6c and > usr/src/crypto/openssl is version 0.9.6a? the basic difference is in what's been merged in to the base source tree. the ports version is a "more recent" version, but not distributed with the OS. i think that about sums up the difference. -------/ f. johan beisser /--------------------------------------+ http://caustic.org/~jan jan@caustic.org "John Ashcroft is really just the reanimated corpse of J. Edgar Hoover." -- Tim Triche To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 5:56:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from SRDMAIL.SINP.MSU.RU (bigking.sinp.msu.ru [213.131.9.130]) by hub.freebsd.org (Postfix) with ESMTP id A5CB037B417 for ; Sun, 23 Dec 2001 05:56:14 -0800 (PST) Received: from dima (helo=localhost) by SRDMAIL.SINP.MSU.RU with local-esmtp (Exim 3.33 #3) id 16I95e-000IBq-00; Sun, 23 Dec 2001 16:54:58 +0300 Date: Sun, 23 Dec 2001 16:54:58 +0300 (MSK) From: Dmitry Mottl To: "f.johan.beisser" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: openssl In-Reply-To: <20011223054002.V16958-100000@localhost> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Johan On Sun, 23 Dec 2001, f.johan.beisser wrote: > On Sun, 23 Dec 2001, Dmitry Mottl wrote: > > > Hi, All! > > > > What's the difference between cvsuped /usr/src/crypto/openssl and > > /usr/ports/security/openssl? > > > > Why /usr/ports/security/openssl is version 0.9.6c and > > usr/src/crypto/openssl is version 0.9.6a? > > the basic difference is in what's been merged in to the base source tree. > the ports version is a "more recent" version, but not distributed with the > OS. > > i think that about sums up the difference. So, why /usr/src/crypto/openssl isn't current version. I think cvsup versions must be CURRENT version of software. I have mistaken, when I said that ported version have number 0.9.6c - actualy it is 0.9.6b (0.9.6c - is the latest at openssl.org, but it is not ported yet...) And when I try to build ported version (0.9.6b) 'make' says that I have it already! But I have 0.9.6a which is distributed with FreeBSD 4.4-RELEASE (/usr/lib/libssl.so.2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 6: 8:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 141CF37B405 for ; Sun, 23 Dec 2001 06:08:42 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.24]) by services.webwarrior.net (Postfix) with ESMTP id AC5784AC for ; Sun, 23 Dec 2001 08:08:15 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 42169386E; Sun, 23 Dec 2001 08:08:49 +0000 (GMT) Date: Sun, 23 Dec 2001 08:08:49 +0000 From: Josh Paetzel To: johann@broadpark.no Cc: freebsd-questions@FreeBSD.ORG Subject: Re: your mail Message-ID: <20011223080849.C227@twincat.vladsempire.net> Mail-Followup-To: johann@broadpark.no, freebsd-questions@FreeBSD.ORG References: <1009114372.3c25dd041de76@mail.broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1009114372.3c25dd041de76@mail.broadpark.no>; from johann@broadpark.no on Sun, Dec 23, 2001 at 02:32:52PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 02:32:52PM +0100, johann@broadpark.no wrote: Couple of things: 1) Use a topic when you post to the list. 2) Wrap your lines at 70 characters or so. Your whole email was on two lines. Very hard to read. > > For any daemon to work on my static NAT-based ADSL connection, a port redirection entry of the daemon's port (range) on my ADSL router-modem is required. I recently wanted DCC (Irssi) and passive FTP mode (ProFTPD) to work on my FreeBSD 4.4-STABLE box. Thus, I added an entry for the IANA-registered ephemeral port range (49152-65535), as well as setting the PassivePorts directive in ProFTPD to match. > > It's also weird, because whenever I recieve a DCC connection, it goes to something like port 4384. And if I request one, the user sees it coming from 10.0.0.1 (my router-modem). By the way, I'm not running NATD. > > Well, I hope someone knows the answer to my problem. > > Cheerio! > You said that you have a NAT based connection, but then said you aren't running NATD. Also, I may just be tired, but I don't see your question. Is something not working for you? I admin a site that is run off of a residental DSL, and has a combination of static ip servers and dynamic 10.0.0.0 range workstations. If you describe your set up in a bit more detail and explain what isn't working right I am sure we can get it sorted out. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 6:19:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id A6DF237B416 for ; Sun, 23 Dec 2001 06:19:16 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id CFA087E88; Sun, 23 Dec 2001 15:19:15 +0100 (MET) To: Josh Paetzel Subject: Re: your mail Message-ID: <1009117155.3c25e7e3c0a5c@mail.broadpark.no> Date: Sun, 23 Dec 2001 15:19:15 +0100 (MET) From: johann@broadpark.no Cc: freebsd-questions@FreeBSD.ORG References: <1009114372.3c25dd041de76@mail.broadpark.no> <20011223080849.C227@twincat.vladsempire.net> In-Reply-To: <20011223080849.C227@twincat.vladsempire.net> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey, Thanks for responding. 1) Sorry I forgot... 2) I didn't think that mattered? Well, my problems are getting passive mode on my FTPD (virtual server, port 2001, whereas passive mode on my main server, port 21, seems to work) and DCC in my IRC client to work. For instance, when I wanted SSH and my system accounts FTPD to work, I had to add an NAT entry for port 22 and port 21 in a telnet session between my machine and my ADSL router; set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp This also has to be done for daemons like identd, BIND etc. However, when it comes to redirecting the ports for passive and DCC, I'm stuck. I'm not the one running NATD, it's my ISP. I have one static IP, and that's it. Hope you can help. Sincerely, Johann Quoting Josh Paetzel : > On Sun, Dec 23, 2001 at 02:32:52PM +0100, johann@broadpark.no wrote: > > Couple of things: 1) Use a topic when you post to the list. > 2) Wrap your lines at 70 characters or so. Your > whole email was on two lines. Very hard to read. > > > > > > > For any daemon to work on my static NAT-based ADSL connection, a port > redirection entry of the daemon's port (range) on my ADSL router-modem > is required. I recently wanted DCC (Irssi) and passive FTP mode > (ProFTPD) to work on my FreeBSD 4.4-STABLE box. Thus, I added an entry > for the IANA-registered ephemeral port range (49152-65535), as well as > setting the PassivePorts directive in ProFTPD to match. > > > > It's also weird, because whenever I recieve a DCC connection, it goes > to something like port 4384. And if I request one, the user sees it > coming from 10.0.0.1 (my router-modem). By the way, I'm not running > NATD. > > > > Well, I hope someone knows the answer to my problem. > > > > Cheerio! > > > > You said that you have a NAT based connection, but then said you > aren't running NATD. Also, I may just be tired, but I don't see your > question. Is something not working for you? I admin a site that is > run off of a residental DSL, and has a combination of static ip > servers and dynamic 10.0.0.0 range workstations. If you describe your > > set up in a bit more detail and explain what isn't working right I am > sure we can get it sorted out. > > Josh > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 7: 0:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pogo.caustic.org (caustic.org [64.163.147.186]) by hub.freebsd.org (Postfix) with ESMTP id 0F97537B405 for ; Sun, 23 Dec 2001 07:00:51 -0800 (PST) Received: from localhost (jan@localhost) by pogo.caustic.org (8.11.6/8.11.6) with ESMTP id fBNF0hM24341; Sun, 23 Dec 2001 07:00:43 -0800 (PST) (envelope-from jan@caustic.org) Date: Sun, 23 Dec 2001 07:00:43 -0800 (PST) From: "f.johan.beisser" X-X-Sender: To: Dmitry Mottl Cc: Subject: Re: openssl In-Reply-To: Message-ID: <20011223065235.E16958-100000@localhost> X-Ignore: This statement isn't supposed to be read by you X-TO-THE-FBI-CIA-AND-NSA: HI! HOW YA DOIN? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001, Dmitry Mottl wrote: > Hello, Johan > So, why /usr/src/crypto/openssl isn't current version. > I think cvsup versions must be CURRENT version of software. no, the source version distributed with FreeBSD is simply what's been merged in to the source tree. while this might not be the latest version, it is a working version. as the old phrase goes: if it ain't broke, don't fix it. > I have mistaken, when I said that ported version have number 0.9.6c > - actualy it is 0.9.6b > (0.9.6c - is the latest at openssl.org, but it is not ported yet...) it's up to the port maintainer to update the version, in this case "ports@freebsd.org". > And when I try to build ported version (0.9.6b) 'make' says that I have it > already! > But I have 0.9.6a which is distributed with FreeBSD 4.4-RELEASE > (/usr/lib/libssl.so.2) no idea, off hand. maybe you have to get rid off the old version first. -------/ f. johan beisser /--------------------------------------+ http://caustic.org/~jan jan@caustic.org "John Ashcroft is really just the reanimated corpse of J. Edgar Hoover." -- Tim Triche To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 7: 2:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 1F05E37B405 for ; Sun, 23 Dec 2001 07:02:16 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBNF2Df00837 for ; Sun, 23 Dec 2001 16:02:14 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122316005378:1734 ; Sun, 23 Dec 2001 16:00:53 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBNFAd931032 for freebsd-questions@FreeBSD.ORG; Sun, 23 Dec 2001 16:10:39 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Sun, 23 Dec 2001 16:10:39 +0100 From: Roman Neuhauser To: freebsd-questions@FreeBSD.ORG Subject: Re: your mail Message-ID: <20011223161039.T850@roman.mobil.cz> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <1009114372.3c25dd041de76@mail.broadpark.no> <20011223080849.C227@twincat.vladsempire.net> <1009117155.3c25e7e3c0a5c@mail.broadpark.no> Mime-Version: 1.0 In-Reply-To: <1009117155.3c25e7e3c0a5c@mail.broadpark.no> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/23/2001 04:00:53 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/23/2001 04:00:59 PM, Serialize complete at 12/23/2001 04:00:59 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > To: Josh Paetzel > Subject: Re: your mail > Date: Sun, 23 Dec 2001 15:19:15 +0100 (MET) > From: johann@broadpark.no > Cc: freebsd-questions@FreeBSD.ORG > > > Hey, > > Thanks for responding. > > 1) Sorry I forgot... > 2) I didn't think that mattered? well, it does 3) don't top-reply. it's easy to lose context. -- FreeBSD 4.4-STABLE 4:09PM up 1 day, 12:39, 12 users, load averages: 0.00, 0.00, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 7:26:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from iitkgp.iitkgp.ernet.in (iitkgp.iitkgp.ernet.in [203.197.98.10]) by hub.freebsd.org (Postfix) with ESMTP id 642F537B417 for ; Sun, 23 Dec 2001 07:26:33 -0800 (PST) Received: from cse.iitkgp.ernet.in (IDENT:root@cse.iitkgp.ernet.in [144.16.192.57]) by iitkgp.iitkgp.ernet.in (8.9.3/8.9.3) with ESMTP id KAA22962 for ; Sun, 23 Dec 2001 10:54:24 -0500 (GMT) Received: from localhost (subhra@localhost) by cse.iitkgp.ernet.in (8.11.0/8.8.7) with ESMTP id fBNFXrF07306 for ; Sun, 23 Dec 2001 21:03:53 +0530 Date: Sun, 23 Dec 2001 21:03:53 +0530 (IST) From: Subhra Banerjee To: questions@FreeBsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have installed Free Bsd in my m/c with VMWare....But the X-window is not coming...I installed VMWare Tools for FreeBsd..but still it is not coming properly...can any one suggest what to do next? Regards, Subhra Banerjee To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 8:10:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from creme-brulee.marcuscom.com (rdu57-28-046.nc.rr.com [66.57.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 942A737B405 for ; Sun, 23 Dec 2001 08:10:48 -0800 (PST) Received: from shumai.marcuscom.com (marcus@shumai.marcuscom.com [192.168.1.4]) by creme-brulee.marcuscom.com (8.11.6/8.11.6) with ESMTP id fBNGA0J40718; Sun, 23 Dec 2001 11:10:00 -0500 (EST) (envelope-from marcus@marcuscom.com) Subject: Re: mod_php4 on 4.5-PRERELEASE build woes From: Joe Clarke To: Kevin Golding Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0 (Preview Release) Date: 23 Dec 2001 11:10:46 -0500 Message-Id: <1009123847.52216.0.camel@shumai.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 2001-12-23 at 06:50, Kevin Golding wrote: > I just upgraded a machine using sources from Thursday, and upon trying > to install mod_php4, (I selected support for GD and XML) I received this > error: Looks like your libtool install might be broken. Try removing libtool, then reinstall it. Joe > > > ===> Extracting for mod_php4-4.1.0 > >> Checksum OK for php-4.1.0.tar.gz. > ===> mod_php4-4.1.0 depends on file: /usr/local/sbin/apxs - found > ===> mod_php4-4.1.0 depends on executable: autoconf213 - found > ===> mod_php4-4.1.0 depends on shared library: gd.2 - found > ===> mod_php4-4.1.0 depends on shared library: freetype.7 - found > ===> mod_php4-4.1.0 depends on shared library: png.5 - found > ===> mod_php4-4.1.0 depends on shared library: jpeg.9 - found > ===> mod_php4-4.1.0 depends on shared library: mysqlclient.10 - found > ===> mod_php4-4.1.0 depends on shared library: expat.2 - not found > ===> Verifying install for expat.2 in /usr/ports/textproc/expat2 > >> expat-1.95.2.tar.gz doesn't seem to exist in /usr/ports/distfiles/. > >> Attempting to fetch from http://prdownloads.sourceforge.net/expat/. > Receiving expat-1.95.2.tar.gz (190316 bytes): 100% > 190316 bytes transferred in 0.5 seconds (401.08 kBps) > ===> Extracting for expat-1.95.2 > >> Checksum OK for expat-1.95.2.tar.gz. > ===> expat-1.95.2 depends on executable: gmake - found > ===> expat-1.95.2 depends on executable: libtool - found > ===> Patching for expat-1.95.2 > ===> Configuring for expat-1.95.2 > creating cache ./config.cache > checking host system type... i386--freebsd4.5 > checking build system type... i386--freebsd4.5 > checking for ranlib... ranlib > checking for gcc... cc > checking whether the C compiler (cc -O -pipe ) works... yes > checking whether the C compiler (cc -O -pipe ) is a cross-compiler... > no > checking whether we are using GNU C... yes > checking whether cc accepts -g... yes > checking for ld used by GCC... /usr/libexec/elf/ld > checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes > checking for BSD-compatible nm... /usr/bin/nm -B > checking whether ln -s works... yes > updating cache ./config.cache > /usr/local/share/libtool/ltconfig: Can't open /usr/local/share/libtool/l > tconfig: > No such file or directory > configure: error: libtool configure failed > ===> Script "configure" failed: here are the contents of "config.log" > This file contains any messages produced by compilers while > running configure, to aid debugging if configure makes a mistake. > > configure:648: checking host system type > configure:669: checking build system type > configure:689: checking for ranlib > configure:719: checking for gcc > configure:832: checking whether the C compiler (cc -O -pipe ) works > configure:848: cc -o conftest -O -pipe conftest.c 1>&5 > configure:874: checking whether the C compiler (cc -O -pipe ) is a > cross-compil > er > configure:879: checking whether we are using GNU C > configure:888: cc -E conftest.c > configure:907: checking whether cc accepts -g > configure:950: checking for ld used by GCC > configure:1012: checking if the linker (/usr/libexec/elf/ld) is GNU ld > GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 > [FreeBSD]) > configure:1028: checking for BSD-compatible nm > configure:1064: checking whether ln -s works > (end of "config.log") > *** Error code 1 > > Stop in /usr/ports/textproc/expat2. > *** Error code 1 > > > As may be expected when I tried again with the basic configs it all went > lovely, but I would like to install extra features if possible so a clue > would be appreciated. > > Kevin > -- > kevin@caomhin.demon.co.uk > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 8:21:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gamma.root-servers.ch (gamma.root-servers.ch [195.49.62.126]) by hub.freebsd.org (Postfix) with SMTP id 3E39037B41A for ; Sun, 23 Dec 2001 08:21:24 -0800 (PST) Received: (qmail 48252 invoked from network); 23 Dec 2001 16:20:54 -0000 Received: from dclient217-162-128-224.hispeed.ch (HELO athlon550) (217.162.128.224) by 0 with SMTP; 23 Dec 2001 16:20:54 -0000 Date: Sun, 23 Dec 2001 17:21:53 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.53bis) Educational Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <100740614.20011223172153@buz.ch> To: questions@freebsd.org Subject: pf for FreeBSD? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hello, I wonder whether there are any plans to integrate OpenBSD's new pf into FreeBSD? I know that it's mostly an ipf clone, but stuff like the automatic generation of skipsets to accelerate parsing of the packets for sure sound nice. Best regards, Gabriel ‚H„Û5 -----BEGIN PGP SIGNATURE----- Version: PGP 6.5i iQEVAwUBPCX2lsZa2WpymlDxAQHZjwf+OdrwYGMyIIYggrbUVPkcWzCHTmkQCMZx Q6rmP5w1CKr3uMnPfRgLSumIp7s5JiIhR/eTyj4l/WeEAuo+eg7Ci4PBOHshOr6f IY/4R8Z/y+bRQ0S44419YgRPLqmWYyL89HFSD58tcXYDvnYET12fTDQ8iSSU3laV Pa4kOBf3Kmk/W/am4M4A7633m+uRYcHD8sJHWSlE+tS4HTiVPQvbYqRipQ9WSnyQ Q89pAygWpJUdyfcixmc0lhXEHXLAznMbEWDmfIU2hgVZn+hSdCRQBvhCseKTRR/v d+ogR+GLTHwGFFX6uPNYydhyrx312jWSe97JT5ZKEISfispUsIMESA== =Z65Z -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 9: 1:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from diomedes.noc.ntua.gr (diomedes.noc.ntua.gr [147.102.222.220]) by hub.freebsd.org (Postfix) with ESMTP id 67E8237B405 for ; Sun, 23 Dec 2001 09:01:28 -0800 (PST) Received: from thlemaxos.mechan.ntua.gr (thlemaxos.mechan.ntua.gr [147.102.193.1]) by diomedes.noc.ntua.gr (8.11.6/8.11.6) with SMTP id fBNH1Oi06309 for ; Sun, 23 Dec 2001 19:01:25 +0200 (EET) Received: (qmail 21742 invoked by uid 500); 23 Dec 2001 17:01:01 -0000 Date: Sun, 23 Dec 2001 19:01:01 +0200 From: Stefanos Papanicolopulos To: freebsd-questions@freebsd.org Subject: HP scanjet 5300C listed in uscanner(4) Message-ID: <20011223190101.A21724@mechan.ntua.gr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The man page for uscanner(4) says this device supports the HP ScanJet 5300C scanner, and (quite obviously) refers to the SANE webpage for more information. The scanner IS actually detected by the kernel (as /dev/uscanner0) but the only information on how to use SANE with it applies to linux (a patched version of linux, to support SCSI over USB as required by the scanner). Has anyone been able to actually use this model under FreeBSD? Using what configuration? TIA, Stefanos Papanicolopulos To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 9: 6:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from slacknet.slacknet.com (slacknet.slacknet.com [204.228.135.180]) by hub.freebsd.org (Postfix) with ESMTP id 0E08337B417 for ; Sun, 23 Dec 2001 09:06:58 -0800 (PST) Received: from rj45 (helo=localhost) by slacknet.slacknet.com with local-esmtp (Exim 3.12 #1 (Debian)) id 16IC5R-0005RA-00 for ; Sun, 23 Dec 2001 10:06:57 -0700 Date: Sun, 23 Dec 2001 10:06:57 -0700 (MST) From: RJ45 To: freebsd-questions@freebsd.org Subject: libfpx BROKEN ?? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, libfpx is needed by ImageMagik. here is version 1.2.0: b_string.cpp: In method `void Chaine::PlaceParametre(const Chaine &, short int = 0)': b_string.cpp:347: invalid operands `const char *' and `int8 *' to binary `operator -' b_string.cpp:352: passing `int8 *' as argument 2 of `strcat(char *, const char *)' changes signedness *** Error code 1 anyine could fix this problem?? thanks Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 9:10:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 5B8F737B417 for ; Sun, 23 Dec 2001 09:10:22 -0800 (PST) Received: from barbish ([63.70.155.108]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Sun, 23 Dec 2001 12:12:14 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: How to see directory tree from command line? Date: Sun, 23 Dec 2001 12:10:07 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does FBSD have a command like the MS/dos command tree? What to be able to use the mouse to point to the directory and them delete, move, copy files and or directories around the tree. Startable from the command line, not under x11 windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 9:34:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 3C0EC37B405 for ; Sun, 23 Dec 2001 09:34:39 -0800 (PST) Received: from colt.ncptiddische.net (ppp-331.wobline.de [212.68.71.52]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBNHYU811949; Sun, 23 Dec 2001 18:34:30 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBNHaPX51381; Sun, 23 Dec 2001 18:36:26 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBNHYvK00602; Sun, 23 Dec 2001 18:34:57 +0100 (CET) (envelope-from nils) Date: Sun, 23 Dec 2001 18:34:57 +0100 From: Nils Holland To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: How to see directory tree from command line? Message-ID: <20011223183457.B432@tisys.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Sun, Dec 23, 2001 at 12:10:07PM -0500 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 6:28PM up 1:43, 1 user, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 12:10:07PM -0500, Joe & Fhe Barbish stood up and spoke: > Does FBSD have a command like the MS/dos command tree? > What to be able to use the mouse to point to the directory > and them delete, move, copy files and or directories around the tree. > > Startable from the command line, not under x11 windows. While I don't use that, I guess you may want something like "Midnight Commander" from the ports collection. It runs on the console (also supports X11, but you don't need to use it there) and allows you do do all kinds of file operations. Have a look at /usr/ports/misc/mc/pkg-descr for more... Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 9:49:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebsdportal.com (ci590846-b.lxintn1.ky.home.com [24.9.218.175]) by hub.freebsd.org (Postfix) with ESMTP id 02DCC37B405 for ; Sun, 23 Dec 2001 09:49:47 -0800 (PST) Received: (from jfreeze@localhost) by freebsdportal.com (8.11.6/8.11.6) id fBNHr7T14660 for questions@freebsd.org; Sun, 23 Dec 2001 12:53:07 -0500 (EST) (envelope-from jfreeze) Date: Sun, 23 Dec 2001 12:53:07 -0500 From: Jim Freeze To: questions@freebsd.org Subject: Smooth transition possible when switching ISP? Message-ID: <20011223125307.A14649@freebsdportal.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have a web server on a box at home that uses the cable provider @home. I am using granite canyon as the name server provider. (The IP is dhcp but has not changed for over a year.) I plan this month to switch to DSL (and thus will get a new static IP). Currently, both networks are active. Since the web server is running on a dual-homed host, at some point I will have to unplug from one provider and switch to the other. I suppose that unless I can synchronize exactly with the name server update that there will be some down time of the site. It would be nice if I could limit that downtime. Can anyone give me some suggestions as the best way to make this transition. Thanks -- Jim Freeze Today is a fine day for Ruby programming. www.freeze.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 10: 7: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id C1D0B37B43C for ; Sun, 23 Dec 2001 10:06:51 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 696E1BCFD for ; Sun, 23 Dec 2001 10:06:51 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id KAA20946 for ; Sun, 23 Dec 2001 10:06:51 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBNI74u28721; Sun, 23 Dec 2001 10:07:04 -0800 (PST) (envelope-from swear@blarg.net) To: freebsd-questions@FreeBSD.ORG Subject: Re: any difference between cable(TV) and phone line high speed internet References: <200112211956.fBLJu1d16378@ptavv.es.net> From: swear@blarg.net (Gary W. Swearingen) Date: 23 Dec 2001 10:07:04 -0800 In-Reply-To: <200112211956.fBLJu1d16378@ptavv.es.net> Message-ID: Lines: 20 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > Well, the interconnect to your desk is not shared, but congestion can > occur anyplace other than that and it's all shared from that point. With DSL, modem to local phone exchange is not shared, but I suppose that what happens beyond that nobody can say as it is too varied. (?) I understood local Quest to use ATM to my ISP, but it shouldn't matter to me because Quest guarantees the transfer speed (to 256/128 ?), but I think they've got it set up to guarantee (or at least almost always provide) 640/128. Quest and the ISP decide on protocols I need to tell my modem to use to talk with the ISP. I was told it is PPPoATM. But I communicate via plain TCP/IP and no PPP-anything; the modem is a router. Some ISPs configure the modem as a bridge so it looks to your system like one of your ISP's NICs extended to your site. From what I've seen, Quest is near-100% reliable as long as you don't need to deal with so-called customer service for service changes, etc., and low hassle, while Cable is plagued with game-playing like frequent downtime, not allowing servers, sharing subnets, etc. The extra speed would be nice, though. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 10:24:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cletus.cornhusker.net (cletus.cornhusker.net [64.21.192.68]) by hub.freebsd.org (Postfix) with ESMTP id A2F5437B416 for ; Sun, 23 Dec 2001 10:24:48 -0800 (PST) Received: from cletus.cornhusker.net (cletus.cornhusker.net [64.21.192.68]) by cletus.cornhusker.net (8.11.3/8.11.1) with ESMTP id fBNDNw017425 for ; Sun, 23 Dec 2001 13:23:58 GMT (envelope-from deboert@cletus.cornhusker.net) Date: Sun, 23 Dec 2001 13:23:57 +0000 (GMT) From: Tim DeBoer To: questions@freebsd.org Subject: ls -lh ??? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Folks, Red Hat, and probably most other dists of Linux, has an ls command which basically makes size output "human readable". Like this ls -l /var/spool/mail/deboert -rw-r----- 1 deboert mail 18834 Dec 23 12:03 /var/spool/mail/deboert ls -lh /var/spool/mail/deboert -rw-r----- 1 deboert mail 18k Dec 23 12:03 /var/spool/mail/deboert One thing I've noticed since moving to FreeBSD, is that -h doesn't do this translation. It's not a huge flaming big deal, not having it, but it does make life easier when dealing with *really* large files and directories. I've checked man ls, and came up empty handed. Is there a similar option in FreeBSD? Or is that option ls version specific? -- Tim DeBoer http://www.freebsd-geek.com "When you find yourself in the company of a Halfling and an ill-tempered Dragon, remember, you do not have to outrun the Dragon... ...you just have to outrun the Halfling." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 11:16:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sumax.dyndns.org (212-100-182-34.adsl.easynet.be [212.100.182.34]) by hub.freebsd.org (Postfix) with ESMTP id 86B6037B416 for ; Sun, 23 Dec 2001 11:16:35 -0800 (PST) Received: by sumax.dyndns.org (Postfix, from userid 1001) id 6196421B9; Sun, 23 Dec 2001 20:14:49 +0100 (CET) Date: Sun, 23 Dec 2001 20:14:49 +0100 From: supc@newmail.net To: freebsd-questions@freebsd.org Subject: ftp from mounted ntfs partition to other machine results in corrupted data Message-ID: <20011223201449.A369@freedaemon.home.lan> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD 4.5-PRERELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hello, I have a FreeBSD 4.4-STABLE (now 4.5-PRERELEASE) (i386) installation, dualbooting with windows. There's an NTFS partition, and it's mounted in FreeBSD. Reading files from it works allright (I can run exe's using wine). But the strange thing is: when logging in to the machine via ftp and requesting a file from the ntfs partition, i get a file of the same size but the contents are messed up. The received file seems to be a mixture of data from the original file and other files from the ntfs partition. FTP'ing from a UFS partition works okay, so I can transfer the files by first copying them there and then doing the FTP transfer. scp works okay. My guess is that the ftp daemon tries to do some caching on the file which doesn't work with ntfs filesystem ... Anyone got a clue? greets To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 11:23:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.linkline.com (smtp1.linkline.com [192.216.128.16]) by hub.freebsd.org (Postfix) with ESMTP id 9973D37B417 for ; Sun, 23 Dec 2001 11:23:42 -0800 (PST) Received: from linkline.com (ont-cvx1-243.linkline.com [64.30.217.243]) by smtp1.linkline.com (Postfix) with ESMTP id 7D268163520 for ; Sun, 23 Dec 2001 11:23:39 -0800 (PST) Message-ID: <3C263090.4D1C0AAF@linkline.com> Date: Sun, 23 Dec 2001 11:29:20 -0800 From: John Hopkins X-Mailer: Mozilla 4.73 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Installation Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am new to FreeBSD, though I have had no problems with UNIX based Linux. However, I cannot install Power Pack 4.4. Every time I get to the point where the system should install on my hard drive I get the message "Unable to transfer the bin distribution from adc0c." The installation stops at this point. Any suggestions? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 11:36: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 1610E37B417 for ; Sun, 23 Dec 2001 11:36:06 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.91]) by services.webwarrior.net (Postfix) with ESMTP id 2AFAA4AC for ; Sun, 23 Dec 2001 13:35:47 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id EFDF4386E; Sun, 23 Dec 2001 13:16:52 +0000 (GMT) Date: Sun, 23 Dec 2001 13:16:52 +0000 From: Josh Paetzel To: Tim DeBoer Cc: questions@FreeBSD.ORG Subject: Re: ls -lh ??? Message-ID: <20011223131652.A237@twincat.vladsempire.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from deboert@cletus.cornhusker.net on Sun, Dec 23, 2001 at 01:23:57PM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 01:23:57PM +0000, Tim DeBoer wrote: > Hi Folks, > Red Hat, and probably most other dists of Linux, has an ls command which > basically makes size output "human readable". > Like this > ls -l /var/spool/mail/deboert > -rw-r----- 1 deboert mail 18834 Dec 23 12:03 > /var/spool/mail/deboert > > ls -lh /var/spool/mail/deboert > -rw-r----- 1 deboert mail 18k Dec 23 12:03 > /var/spool/mail/deboert > > One thing I've noticed since moving to FreeBSD, is that -h doesn't do this > translation. It's not a huge flaming big deal, not having it, but it does > make life easier when dealing with *really* large files and directories. > > I've checked man ls, and came up empty handed. > Is there a similar option in FreeBSD? Or is that option ls version > specific? > > -- How about BLOCKSIZE=1K in your environment and then ls -s Josh > > Tim DeBoer > http://www.freebsd-geek.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 11:37:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from linuxmail.touchtunes.com (operator.touchtunes.com [216.94.139.201]) by hub.freebsd.org (Postfix) with ESMTP id A298037B417 for ; Sun, 23 Dec 2001 11:37:18 -0800 (PST) Received: from sunder.touchtunes.com (sunder.touchtunes.com [192.168.0.26]) by linuxmail.touchtunes.com (8.9.3/8.8.7) with ESMTP id OAA07378; Sun, 23 Dec 2001 14:37:17 -0500 Received: (from dinjo@localhost) by sunder.touchtunes.com (8.11.6/8.11.6) id fBNJage09018; Sun, 23 Dec 2001 14:36:42 -0500 (EST) (envelope-from dinjo) Date: Sun, 23 Dec 2001 14:36:42 -0500 From: Joel Dinel To: Tim DeBoer Cc: freebsd-questions@freebsd.org Subject: Re: ls -lh ??? Message-ID: <20011223143642.A8994@sunder.touchtunes.com> Mail-Followup-To: Joel Dinel , Tim DeBoer , freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from deboert@cletus.cornhusker.net on Sun, Dec 23, 2001 at 01:23:57PM +0000 X-Useless-Header: Look ma, it's a # sign! X-Operating-System: FreeBSD 4.4-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tim, BSD ls doesn't have that option. GNU ls does. You can easily install 'gnuls' from the ports tree (in /usr/ports/misc/gnuls), and simply make aliases around that (alias ls='gnuls') That should do the trick. On Sun, Dec 23, 2001 at 01:23:57PM +0000, Tim DeBoer wrote: > Date: Sun, 23 Dec 2001 13:23:57 +0000 (GMT) > From: Tim DeBoer > To: questions@FreeBSD.ORG > Subject: ls -lh ??? > > Hi Folks, > Red Hat, and probably most other dists of Linux, has an ls command which > basically makes size output "human readable". > Like this > ls -l /var/spool/mail/deboert > -rw-r----- 1 deboert mail 18834 Dec 23 12:03 > /var/spool/mail/deboert > > ls -lh /var/spool/mail/deboert > -rw-r----- 1 deboert mail 18k Dec 23 12:03 > /var/spool/mail/deboert > > One thing I've noticed since moving to FreeBSD, is that -h doesn't do this > translation. It's not a huge flaming big deal, not having it, but it does > make life easier when dealing with *really* large files and directories. > > I've checked man ls, and came up empty handed. > Is there a similar option in FreeBSD? Or is that option ls version > specific? > > -- > > Tim DeBoer > http://www.freebsd-geek.com > > "When you find yourself in the company of a Halfling and an ill-tempered > Dragon, remember, you do not have to outrun the Dragon... > ...you just have to outrun the Halfling." > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---end quoted text--- -- Joel Dinel System Administrator TouchTunes Digital Jukebox, Inc. GnuPG key : http://darkhost.mine.nu:81/~joel/mykey.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 11:51:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f162.law8.hotmail.com [216.33.241.162]) by hub.freebsd.org (Postfix) with ESMTP id C505D37B405 for ; Sun, 23 Dec 2001 11:51:50 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 23 Dec 2001 11:51:50 -0800 Received: from 216.209.246.59 by lw8fd.law8.hotmail.msn.com with HTTP; Sun, 23 Dec 2001 19:51:50 GMT X-Originating-IP: [216.209.246.59] From: "Pierre-Luc Drouin" To: freebsd-questions@freebsd.org Subject: Mesa & xscreensaver problem: Xlib: extension "GLX" missing on display ":0.0" Date: Sun, 23 Dec 2001 19:51:50 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Message-ID: X-OriginalArrivalTime: 23 Dec 2001 19:51:50.0844 (UTC) FILETIME=[437597C0:01C18BEB] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i got error mesg Xlib: extension "GLX" missing on display ":0.0" on my fbsd 4.4-stable box when i try to load xscreensaver. I've Mesa-3.4.2_2, xscreensaver-gtk-3.33 and XFree86-4.1.0_10. I've tried to reinstall Mesa, but it changes nothing. 3D screensavers on kde 2.2.2 don't work too... Someone know what to do with that? _________________________________________________________________ Discutez en ligne avec vos amis, essayez MSN Messenger : http://messenger.msn.fr/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 12: 6:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 34D0A37B419 for ; Sun, 23 Dec 2001 12:06:56 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.91]) by services.webwarrior.net (Postfix) with ESMTP id B7F374AC for ; Sun, 23 Dec 2001 14:06:27 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id EDAA3386E; Sun, 23 Dec 2001 14:06:20 +0000 (GMT) Date: Sun, 23 Dec 2001 14:06:20 +0000 From: Josh Paetzel To: John Hopkins Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Installation Message-ID: <20011223140620.D237@twincat.vladsempire.net> Mail-Followup-To: John Hopkins , freebsd-questions@FreeBSD.ORG References: <3C263090.4D1C0AAF@linkline.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C263090.4D1C0AAF@linkline.com>; from jhopkins@linkline.com on Sun, Dec 23, 2001 at 11:29:20AM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 11:29:20AM -0800, John Hopkins wrote: > I am new to FreeBSD, though I have had no problems with UNIX based > Linux. However, I cannot install Power Pack 4.4. Every time I get to > the point where the system should install on my hard drive I get the > message "Unable to transfer the bin distribution from adc0c." The > installation stops at this point. Any suggestions? > > Try a different cdrom drive. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 12:13:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay.pair.com (relay1.pair.com [209.68.1.20]) by hub.freebsd.org (Postfix) with SMTP id 3055F37B416 for ; Sun, 23 Dec 2001 12:13:52 -0800 (PST) Received: (qmail 7285 invoked from network); 23 Dec 2001 20:13:51 -0000 Received: from softdnserror (HELO mail.bacxs.com) (67.8.24.120) by relay1.pair.com with SMTP; 23 Dec 2001 20:13:51 -0000 X-pair-Authenticated: 67.8.24.120 Received: from massive.bacxs.com by mail.bacxs.com with SMTP (MDaemon.PRO.v5.0.0d.R) for ; Sun, 23 Dec 2001 15:12:14 -0500 Message-Id: <5.1.0.14.0.20011223150855.026bc6d8@127.0.0.1> X-Sender: mwoodson@127.0.0.1 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 23 Dec 2001 15:12:13 -0500 To: johann@broadpark.no From: Mark Woodson Subject: Re: your mail Cc: freebsd-questions@freebsd.org In-Reply-To: <1009117155.3c25e7e3c0a5c@mail.broadpark.no> References: <20011223080849.C227@twincat.vladsempire.net> <1009114372.3c25dd041de76@mail.broadpark.no> <20011223080849.C227@twincat.vladsempire.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Return-Path: mwoodson@bacxs.com X-MDaemon-Deliver-To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 03:19 PM 12/23/2001 +0100, you wrote: >Well, my problems are getting passive mode on my FTPD (virtual server, port 2001, whereas passive mode on my main server, port 21, seems to work) and DCC in my IRC client to work. For instance, when I wanted SSH and my system accounts FTPD to work, I had to add an NAT entry for port 22 and port 21 in a telnet session between my machine and my ADSL router; > >set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp > >This also has to be done for daemons like identd, BIND etc. >However, when it comes to redirecting the ports for passive and DCC, I'm stuck. I'm not the one running NATD, it's my ISP. I have one static IP, and that's it. Well... Both passive ftp and dcc use random high ports on both ends. Passive ftp works great from the client side through a firewall but is a rather large pain on the server end behind a nat/firewall. Basically you have to redirect _all_ tcp ports over 1023 to your machine. Active ftp is easier because it uses port 20 (ftp-data). -Mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 12:49: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from m-net.arbornet.org (m-net.arbornet.org [209.142.209.161]) by hub.freebsd.org (Postfix) with ESMTP id 822EF37B405; Sun, 23 Dec 2001 12:48:59 -0800 (PST) Received: (from ceesaxp@localhost) by m-net.arbornet.org (8.11.4/8.11.2) id fBNKRxC70282; Sun, 23 Dec 2001 15:27:59 -0500 (EST) (envelope-from ceesaxp) Date: Sun, 23 Dec 2001 15:27:56 -0500 From: Andrei Popov To: freebsd-current@freebsd.org, freebsd-questions@freebsd.org Subject: Slow performance of a recent -current/X Message-ID: <20011223152755.A67308@m-net.arbornet.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Not sure whether this better belongs to -current or -questions... =20 The situation is like this: I run a recent current (cvsup'ed on Fri Dec 21) with drm (0.9.4). X 4.1.0_10 has been compiled locally with Matrox drivers from Matrox site (1.4.3, to match X4.1.x). This has also been done around = =20 the same time as the last cvsup. =20 Hardware-wise the machine is a dual Celleron-500 A-Bit BP-6 with 256Mb RAM. Hard drives are IBM DTLA-307020 and Western Digital AC14200R. IBM is not used in DMA mode (never works -- kernel resets a device a few times after read failures then freezes), but in PIO. Graphics is Matrox MGA450 w= ith 64Mb VRAM, AGP. The problem is that now, at somewhat sporadic intervals, the machine behaves like a drunken monkey -- in X cursor would suddenly perform with a 'delayed' effect -- slowly following a trajectory it was supposed to draw in no time, windows refresh (especially window decorations) with a noticable delay. This never happened before, and I am somewhat at a loss trying to pin point the cause of it. vmstat(8) has not shown anything particularly interesting, top(1) does not help either... Therfore this mail -- has anybody seen similar behavior? I would suspect t= he hard drive (IBM), but swap is barely used and there's next to no hard drive activity in many cases when I saw this... I've also heard that Matrox is not behaving too well under FreeBSD -- but there were no problems before. Thanks for comments/suggestions & please reply to my email address, as I am= =20 not on -questions. -- Andrei To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 12:53: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 1330F37B417 for ; Sun, 23 Dec 2001 12:52:59 -0800 (PST) Received: from cpe-66-87-61-245.co.sprintbbd.net ([66.87.61.245] helo=hts2) by snipe.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16IFcA-0006Jk-00; Sun, 23 Dec 2001 12:52:58 -0800 Reply-To: From: "Seth Andreas Hieronymus" To: Cc: Subject: Re: Mesa & xscreensaver problem: Xlib: extension "GLX" missing on display ":0.0" Date: Sun, 23 Dec 2001 13:53:01 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Under the 'Section "Module"' in the config file: XF86Config, do you have 'Load "glx"'? Seth Hieronymus --- Signature --- Glory is fleeting, but obscurity is forever. -- Napoleon Bonaparte To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 13:23:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta5.rcsntx.swbell.net (mta5.rcsntx.swbell.net [151.164.30.29]) by hub.freebsd.org (Postfix) with ESMTP id 70C5237B41B for ; Sun, 23 Dec 2001 13:23:11 -0800 (PST) Received: from bodhi.alum.calberkeley.org ([208.191.198.173]) by mta5.rcsntx.swbell.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GOT006ATFEMEJ@mta5.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Sun, 23 Dec 2001 15:23:10 -0600 (CST) Date: Sun, 23 Dec 2001 15:22:53 -0600 From: David Johnson Subject: dual boot X-Sender: d-johns/postoffice.swbell.net@127.0.0.1 To: freebsd-questions@freebsd.org Message-id: <5.1.0.14.0.20011223151943.00a106d0@127.0.0.1> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Content-type: text/plain; charset=us-ascii; format=flowed Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In a dual boot, using either FreeBSD4.4 or 4.5, does the 1st BSD slice need to be within the 1st 10 GB of the hard disk, or somewhere else. I have 2047GB dos as c:, and wonder how far out I can put FreeBSD. Thanks David E. Johnson Dallas, TX 214-520-8164 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 13:28:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 2165937B434 for ; Sun, 23 Dec 2001 13:28:33 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id PAA22090; Sun, 23 Dec 2001 15:28:29 -0600 (CST) Message-Id: <3.0.5.32.20011223152825.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Sun, 23 Dec 2001 15:28:25 -0600 To: David Johnson , freebsd-questions@FreeBSD.ORG From: jacks@sage-american.com Subject: Re: dual boot In-Reply-To: <5.1.0.14.0.20011223151943.00a106d0@127.0.0.1> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ...no problem with that position... At 03:22 PM 12.23.2001 -0600, David Johnson wrote: >In a dual boot, using either FreeBSD4.4 or 4.5, does the 1st BSD slice need >to be within the 1st 10 GB of the hard disk, or somewhere else. I have >2047GB dos as c:, and wonder how far out I can put FreeBSD. > >Thanks > >David E. Johnson >Dallas, TX >214-520-8164 > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 13:38:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from slacknet.slacknet.com (slacknet.slacknet.com [204.228.135.180]) by hub.freebsd.org (Postfix) with ESMTP id 86E4837B417 for ; Sun, 23 Dec 2001 13:38:15 -0800 (PST) Received: from rj45 (helo=localhost) by slacknet.slacknet.com with local-esmtp (Exim 3.12 #1 (Debian)) id 16IGJz-0005vC-00 for ; Sun, 23 Dec 2001 14:38:15 -0700 Date: Sun, 23 Dec 2001 14:38:15 -0700 (MST) From: RJ45 To: freebsd-questions@freebsd.org Subject: fonts trouble using XDMCP Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am using XDMCP from GNU-win32 XWin.exe -query server -from client the problem is that no fonts are displayed to me in the window manager. I mean everything works but NO FONT AT ALL, so it is not usable. How may I solve this problem? I even installed X font server but it did not bring any results... any hints about it? thanks Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 13:42:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from openrelay.msu.edu (openrelay.msu.edu [35.9.98.20]) by hub.freebsd.org (Postfix) with ESMTP id E061837B41B for ; Sun, 23 Dec 2001 13:42:35 -0800 (PST) Received: from Megos ([65.194.248.251]) by openrelay.msu.edu (8.11.1/8.11.1) with ESMTP id fBNLTZu61259 for ; Sun, 23 Dec 2001 16:29:35 -0500 (EST) (envelope-from raiden23@netzero.net) Message-Id: <4.2.0.58.20011223163417.0097c610@pop.netzero.net> X-Sender: raiden23@pop.netzero.net (Unverified) X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Sun, 23 Dec 2001 16:44:57 -0500 To: freebsd-questions@FreeBSD.ORG From: Lord Raiden Subject: BSD emergency shutdown of all servers Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How would you go about doing an emergency shutdown of all of your BSD servers say if something were happening that all of your servers HAD to be shut down in 2 minutes or less regardless. SSH'ing to all the boxes at the same time would be kinda impossible in that limited time. I'm more looking at the old "Panic Button" idea. The idea came to me today and I thought it would be very useful. I don't see a need for it right in the foreseeable future, but then again, I didn't see the need for a UPS either until one of my boxes got whacked by a power surge. So as a little preventative forethought, I want something that can remotely shut down all of our BSD servers within a 2 minute window so that we can go power off at exactly 2 minutes and put the whole NOC dark within 120 seconds of the "Panic Alert" so to speak. Plus being able to execute all of this from a basic script would be great too. Kinda a single option to execute thing. The less things I have to do in that 2 minute panic window, the better. One use I can see for this is if severe weather was approaching and we suddenly got an evacuation warning (say a tornado was coming or something) then that 2 minute panic shutdown would be priceless. Now if the NOC got annihilated by a tornado that would be kinda a pointless exercise, but under other circumstances I can see where that would be a good thing. I'm also wanting this to be able to be done through an account other than ROOT. One that I can assign the option to only be able to execute 3 basic panic commands. One of them being the "shutdown -h now" command. The other two might be things like if we were being hacked I could fire that off to the server(s) in question and shut down all access to them till we could get rid of the hacker, or track him down and report him. Again, I know this is a lengthy question, but I wanted to be as clear as I could. Thanks in advance. I hope this gives you something to think about too. I'm also working on a solution for the NT/2k portion of our network. :) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 13:59:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id EB6B737B41A for ; Sun, 23 Dec 2001 13:59:27 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id BFA987D82; Sun, 23 Dec 2001 22:59:26 +0100 (MET) To: Mark Woodson Subject: Re: your mail Message-ID: <1009144766.3c2653beb171f@mail.broadpark.no> Date: Sun, 23 Dec 2001 22:59:26 +0100 (MET) From: johann@broadpark.no Cc: freebsd-questions@freebsd.org References: <20011223080849.C227@twincat.vladsempire.net> <1009114372.3c25dd041de76@mail.broadpark.no> <20011223080849.C227@twincat.vladsempire.net> <5.1.0.14.0.20011223150855.026bc6d8@127.0.0.1> In-Reply-To: <5.1.0.14.0.20011223150855.026bc6d8@127.0.0.1> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What are _all_ the TCP ports over 1023? As told in the very first e-mail addressing this problem; I tried redirecting the entire IANA-registered ephemeral port range (49152-65535) without much luck. Every time I get a DCC request it opens on e.g. port 4348, making absolutely no sense. Any idea? Quoting Mark Woodson : > At 03:19 PM 12/23/2001 +0100, you wrote: > >Well, my problems are getting passive mode on my FTPD (virtual server, > port 2001, whereas passive mode on my main server, port 21, seems to > work) and DCC in my IRC client to work. For instance, when I wanted SSH > and my system accounts FTPD to work, I had to add an NAT entry for port > 22 and port 21 in a telnet session between my machine and my ADSL > router; > > > >set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp > > > >This also has to be done for daemons like identd, BIND etc. > >However, when it comes to redirecting the ports for passive and DCC, > I'm stuck. I'm not the one running NATD, it's my ISP. I have one static > IP, and that's it. > > Well... > > Both passive ftp and dcc use random high ports on both ends. Passive > ftp works great from the client side through a firewall but is a rather > large pain on the server end behind a nat/firewall. Basically you have > to redirect _all_ tcp ports over 1023 to your machine. Active ftp is > easier because it uses port 20 (ftp-data). > > -Mark > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 14: 1:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id BD28B37B405 for ; Sun, 23 Dec 2001 14:01:52 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id C69CC7F9F; Sun, 23 Dec 2001 23:01:51 +0100 (MET) To: freebsd-questions@freebsd.org Subject: VESA problems Message-ID: <1009144911.3c26544fba461@mail.broadpark.no> Date: Sun, 23 Dec 2001 23:01:51 +0100 (MET) From: johann@broadpark.no MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ho ho ho... I recently changed from the built-in Cirrus Logic GD5430 SVGA controller on my box, which could handle 132x43 as text mode. My (partially) new ATI Mach64-GU graphics accelerator however, only handles 80x60 text mode (according to vidcontrol -i mode | grep T). The ATI card is newer, and has more memory. Yet it will not function as one would expect. Is anyone familiar with this? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 14: 3:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fort.comstar.ru (fort.comstar.ru [195.210.128.13]) by hub.freebsd.org (Postfix) with SMTP id E90B637B419 for ; Sun, 23 Dec 2001 14:03:22 -0800 (PST) Received: (qmail 5888 invoked from network); 23 Dec 2001 22:02:43 -0000 Received: from d072.p8.col.ru (HELO snussnum) (212.248.4.72) by mx.comail.ru with SMTP; 23 Dec 2001 22:02:43 -0000 Message-ID: <1280220011202322214600@snussnum> X-EM-Version: 5, 0, 0, 18 X-EM-Registration: #01B0530810E603002D00 X-Priority: 3 X-MSMail-Priority: Normal From: "abs121314@mail.ru" To: freebsd-questions@freebsd.org Subject: =?windows-1251?Q?=C8=ED=F2=E5=F0=E0=EA=F2=E8=E2=ED=FB=E5_=E8=E3=F0=EE=E2=FB=E5_=F0=EE=EB=E8=EA=E8!?= Date: Mon, 24 Dec 2001 01:02:14 +0300 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_01BC2B74.89D1CCC0" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_01BC2B74.89D1CCC0 Content-Type: multipart/alternative; boundary="----=_NextPart_84815C5ABAF209EF376268C8" ------=_NextPart_84815C5ABAF209EF376268C8 Content-type: text/plain; charset="windows-1251" ÈÍÂÅÑÒÈÖÈÎÍÍÎ - ÔÈÍÀÍÑÎÂÀß ÊÎÌÏÀÍÈß "ÑÎËÈÄ" ïðåäëàãàåò Âàì ñåðèþ èíòåðàêòèâíûõ ðîëèêîâ - óðîêîâ Èç íèõ Âû óçíàåòå êàê óñòðîåí áèðæåâîé ðûíîê öåííûõ áóìàã. -  èãðîâîé , èíòåðàêòèâíîé ôîðìå Âû íàó÷èòåñü íà íåì ðàáîòàòü - Âû ïîëó÷èòå óíèêàëüíóþ âîçìîæíîñòü ïîïðîáîâàòü ñâîè ñèëû íà Áèðæå öåííûõ áóìàã çà ñ÷åò ÈÔÊ "Ñîëèä" Íàæìèòå íà ýòó ññûëêó http://solidinvest.ru/download/lessons/lessons.html Ñ óâàæåíèåì, ÈÔÊ "ÑÎËÈÄ" ------=_NextPart_84815C5ABAF209EF376268C8 Content-Type: text/html; charset="windows-1251" Content-Transfer-Encoding: quoted-printable =C8=D4=CA "=D1=EE=EB=E8=E4"

=C8=CD=C2=C5=D1=D2=C8=D6=C8=CE=CD=CD=CE - =D4=C8= =CD=C0=CD=D1=CE=C2=C0=DF =CA=CE=CC=CF=C0=CD=C8=DF "=D1=CE=CB=C8=C4&qu= ot;=20

 
  =EF=F0=E5=E4=EB=E0=E3=E0=E5=F2 =C2=E0=EC =F1=E5=F0=E8= =FE =E8=ED=F2=E5=F0=E0=EA=F2=E8=E2=ED=FB=F5 =F0=EE=EB=E8=EA=EE=E2 - =F3=F0= =EE=EA=EE=E2
=C8=E7 =ED=E8=F5 =C2=FB =F3=E7=ED=E0=E5=F2=E5 =EA=E0=EA =F3=F1=F2=F0= =EE=E5=ED =E1=E8=F0=E6=E5=E2=EE=E9 =F0=FB=ED=EE=EA =F6=E5=ED=ED=FB=F5 =E1=F3= =EC=E0=E3=2E
- =C2 =E8=E3=F0=EE=E2=EE=E9 , =E8=ED=F2=E5=F0=E0=EA=F2=E8=E2=ED=EE=E9= =F4=EE=F0=EC=E5 =C2=FB =ED=E0=F3=F7=E8=F2=E5=F1=FC =ED=E0 =ED=E5=EC =F0=E0= =E1=EE=F2=E0=F2=FC
- =C2=FB =EF=EE=EB=F3=F7=E8=F2=E5 =F3=ED=E8=EA=E0=EB=FC=ED=F3=FE =E2= =EE=E7=EC=EE=E6=ED=EE=F1=F2=FC =EF=EE=EF=F0=EE=E1=EE=E2=E0=F2=FC =F1=E2=EE= =E8 =F1=E8=EB=FB =ED=E0 =C1=E8=F0=E6=E5 =F6=E5=ED=ED=FB=F5=20 =E1=F3=EC=E0=E3 =E7=E0 =F1=F7=E5=F2 =C8=D4=CA "=D1=EE=EB=E8=E4&= quot;		  
  =CD=E0=E6=EC=E8=F2=E5 =ED=E0 =FD=F2=F3 =F1=F1=FB=EB=EA= =F3 ht= tp://solidinvest=2Eru/download/lessons/lessons=2Ehtml  

=D1 =F3=E2=E0=E6=E5=ED=E8=E5=EC,
=C8=D4=CA "=D1=CE=CB=C8=C4"

------=_NextPart_84815C5ABAF209EF376268C8-- ------=_NextPart_000_01BC2B74.89D1CCC0 Content-Type: application/octet-stream; name="logo.gif" Content-Transfer-Encoding: base64 Content-Description: logo.gif Content-Disposition: attachment; filename="logo.gif" R0lGODlhzwBSANX/AAAAAMDAwHMiStbAwc60uMGfqMipsbmSn7CElOrf46Zzh51lfYA3WY1LaZZa dWIINGYOOW0ZQm8bRHAeRnMhSXMjSnYmTHcoTnkqUHwwVIU/YGkSPWsWQHEfSHMhSnIhSXQjS3Uk THQkTPXv8u3k6YWFfGRkXejo2cfHure3q6amm5WVjHR0bUREQDIyLyEhHxEREPj35/n46fj36Pf1 5/Xz5fTx5PPv4vLt4e/p3uzk2+nf19zPyuLU0AAAAAAAACH5BAEAAAEALAAAAADPAFIAAAb/wIBw SCwaj8ikcslsOp/QqHRKrVqv2Kx2y+16v9dYDkwum89dnK7HaxsWBDavp6vb17sZes/vb2k5BAoO Fg8QDxsREIsPHA4LkJEgGjR+lpeYSTsHCAsSGxsdISCkpaQfHKCqGxMLlZmwsXs3Bg0RtxMhIgK8 vb4CICLCwx+ussfIWzM7grcfAhUVv9PUvMWvydnZND09MUwzAw4XER0g1ejU19rsyDkOGgsGOzrY RDUHDBMdFNLp/73WtRuYKUeDBxE2MHBgIEcNIjQOcABI8ZdAghj70BCkAUPCBwsQDMihI4cBCBI+ iPBX8d/FjDD39CCAgNAGCBwYzOOYMNe5/5boXsYcamaGDh4HFkTI0EPIDR5vQmzw8BPoNKFEs2ap MeCGjCEyABHYUURGjgEKOkSgkC6agA9w4VL1h1WrXSo5FjRQcGDHKxkyBBHAoWfIUwUXJkjwwJLX hFsWMFyYfKEDh3Jvjd3dXCWHhkYSMiwYkGeHogkaDvAYM8TGJgeKn/GioAGBAR47cucecEABBlaa OQuHUoNHgQUZUkXQUABpgwqpLjgo0IOwjBkxdAxYoG/ChAsIchSeQf6rDBs9ajn4Nrx9E8ABuB1o 8BtBJRs8EDS4kCoDwx42DEEDUgxIIIEFDgwQIBI07GCAPe5FyMRZt301BA40ZZDIBiEcoP+ggPlp EAEHHCywmoQoRsHNDjcM8U0P1OFwDw8KMEAiBBmIpMMQxSGgQSoMjMZaikQm8U6OBOjw0AwIPMCA bT20CBhXBSiQXCLyDDlDDz5uwEEHChjQVJFkEuHZIhg4oEBzCkxgyHIKECDeEGf1dkEjcAxZQw/5 gDLJAS2WSaYNBFS5yAYSLHBUAQ7ctMEFDfRFhBgwuhlBgjsKUVw+l22ggDeClokDUgtY0MAMYa0x n3IaKDASRJuAkIgGBsgYQFh8FpiTAn6FWqQMNdzQwwDYhEXLAvxNkEED81Ry3Z4ENHBZbTy8wg0C Ni5VQGG+kjnsDgtqGqIEqUTaQ7E6EOD/QEIYHNDDQ/FxaaMDEHaLYgERNIAAHa+gmt4Cv0FQAQLV ghUIbBA8+e4QXCpQr70R8oCBBAlF+qqAaIn4gAQHJMltDscdwoBq/e7AHsQonofABiKAoEgHCxTQ qxD4HdDoA624C28AOjC6iMI0yHAyyikPwMEzIIQwAQcS1PYhnTwskAoHtREQ6DLqgkItt0SjuMO6 P1UAQgfkZqAAD+EalV8GOIn2NM/Rar1t1ynOUMADu/gi9tIY5DnjAb9tQMFo4TLjwAP00p2yDlJX 1Ys03k2g7wAnNxjtB4gm+JcOBtineMoSR+C4LxR00IGyIrGmx1mIgeLAuYZZ+LmEAxg4//ovpCTk d2s0ZrAxAjPPTqQBFkwAUO6XjoXNDPn9loFqOwtvF3lGhMOA6Md78MnzJwpBw3Y36cS19EPtEOUR MkS9gdgAVSDCBBBcIKQQYhjgAAcNPEz+QFsaMAAO0QOLDhBwgZQ0phqkoJj8akU/znlufzExXwH2 lYBwFQE/iMHM8QSgGPkNYGdzgiBMepAAA8QJbUj4Cn4IkZJ98MMlHABBXwIoQoLIAAc9IMEISECs JZgFRpDIADki4MIPnM50pjPi0irAKwvWcCA1SID5KhiFUfGmJhrIogYssBQtxoM7DGjA3J6IkfPY SgqAAUwO5tCNQg2gG3OowZ7YQAD9kf+RSEKb1BFiMLQ7+vGPgAykIAdJyBrO4AY7YGM32AAgJARL kXJwiBNogINKWlJ2RTikJS1ZL0puEgc2GB9EPmlJJ0qvBsxQQAMywABWsvICGhiTmQZQE1Yy4JYZ 8I+HApWEGZhQAcBcwAFoSLNOAFMBwhzSEGi0gGPGiZgB8GUznYnMMUpvS/PxQAQkQLZtGohqPZAd DtBCDglM4CaL+BK5JkAwO/bAAl66DAQaoEwi3KABibjMAw5wBAKQa0Q34UES3kkiL40oFQ7g5exu QAAGhEIAIkAFCC5ggchAYAICFUIOEIAKAYRgRA2IhAZQsgumAeoIN5AaNKIBgg8c4GH/7+gASydw AK7ZAC0W4EUFzDEABimAAzsFwQRUUgEKZGAAoiTaRpkWArFJAAMIIIBUpTrBMdVgZT6RgBh3QJIc pEcDEnCfmxAQQBogAALQ+Mk5IGCAI+AANr3wwAM5Z6UJVKUDGGjrEQbAigt0DAE7FRv+yDI7A2zs HBWQQIJwgMkA5MBWRvvAORQrSyLwoAEdgKgHHpDRIQyAiC39kjSEioHOXgiujqkpDuynNOP5ogMX IMARdGCLCSTUsQqIgDUkoABo2ksBG0DsBCpQrcbeAwES4EUI2JrUACAgAtIQAQcUEC4d/EgEeLVS ZoGRr0yd1rUcdEBSKPaBc2KPF3gl/0AfIwJUCfRUCBILKwcn8F7FnfUnS6svg54rjeVaEyJtkkYF bGurGwA3BBxUwA2M5osIKECZbwVvBT6wTsky6wAXkA1sZVsEHmSAbAvgFg0UkFxg4M+7XSMAK4R7 AWKR58UNguz6pNEBBvBgfL5kAC9auoGM+hICVNGqjAwMXfRGwAAfQy16vcOAOOVgQBhwLWz1GoAY HBK4IOBAD16sB9rKFzoIuAH1iGaDs05gF2OzQJgMwOZCOSCjbz3aOWp8m0WmhwHmEOoDqAsYHmhA FDI1gIW+xjJgTAAD9X0HeEEQRoLVgD0EwMB20ysEzhEAwx1QiW3YzOYC6KMXHXgeAf8MYEpf3aAA GPhSZhO7CpGFUwg7+OnRyhuBW+LyaDuNAFRthQNpvYWd9uCBUOEigHyx5h0pgQs76xmAAQxY2Rd4 tWEhENxRQAcU1Ka2R00BHWrvwLihug4tNfCBhJDo3IoQQUaFtmDukIsDi4g3iZbiKnjhQAEo+YQD 6mmDBSDKQBKAwDAD0GumGWgDCHCiDAYAAW/eYgBf4StAVXHuiq8CFKmQAAMISzf00HIBDgi5yB/B 8VuJASqDGHnIhfk/yx6gADD3EIRu+nKY23xHNrB5zA2gUCHwSeckCwwEVE70oq88AxEoueIAoZum 12OPM8CBbnRAD3pA6DxBG4IoaQD/oRnQYEkQosHWueZ1PQyAOnVoutpzQ3Wn7wB4hRQOuJ2AqrnH /e54z7ve9873vvv9GClAARcCD4UTpMC0RSgB4q/AgxScYJmO7wIKUpCMErQgACkAQAkyL4QWlCAA AAg9DFQA+tADoAUncAEMYOCCzJve8p8vAQBSwPkAWB70lG8BAAKQ+he8wAWPn73tLy/826OA9TAw gRF4IHsTUD4Anrf97G+Pe94DwAVCKP7lVwCAFwCA9NzX/QqkH/rLB0AFAGAB73Uf+s93/vMtQL0J kC/4FsBgCDAgvul3HwAWfH/42Ud7u3cC+dd/pmd+SWB5M2B/m8d/0ad5KRB/oLd5/4FXAi9wAifw AiqQAibQejzgeRk4e7WngCIIA7tngRj4Ap+nfTPAgi1gAjSAAgAgeEMgg7rHgNBXAiGYAgpYfSrg AgAQfJSngDAQe9hXhLZ3fyXQeuhHeSzgAthXAqOXAi7gfjm4hCcgg/UHg7oneJnXAi24ebInBFCo fj0ogieYfzK4eSYAhkpgeRHoeZlHe1U4gRy4ghR4Ai2gfgGAAgJFfZ5XArIngEJwe7PnebsXff1H fGzIiBxIfM9Xh0NgAso3fS9whYO4hAJIeSZgeeMHgW2YeY9neLV3AtPHhDDweC+Qecx3iTk4BPH3 AoJHfegHfTCgfixQgMLHeTwwe/+XqIlzKIovwAItwIoA+IbxF4EN+Hqg5wL294nO2AIooIhDcHsL yAIXiIaFyIjFCAAL6H6GeIClV37V94q094ErKIDXmI08uH+UBwM8qH/lV3tCQI/Tl38vgHoymIM8 wHo42HkFeIycF4sBkI+QiHknSHwoIHumJ4CCeHsukI/5uARS2AIxIIcOmI40oAL3J3ydp3wBsAJD aH44qI0ACADwOJB82IbVZ4gjGQCjJwQqWHol8IS4Z5MlGY8BmHklYAK7p30yKFDMJ4OP14sLaX5V aIGWd3k8OZPvN5NLKAQrcH+e9wIroIIHOZBVKYjmh4YXeHsE2IYIiASDmIO194Dpm5eLdliB8Hh8 s+iG9ieEwdiBvciUuzeVKHB8nziSLciXHXgC3GdaPOB9opd7qYh7Z5gCTyiIo8eCyXcCLPkCymcC v9h6KVCEzliTQciS1IiRfggAK5B6yud52MgCJEh5oph+lleFboiGsQeGU3kCPZiAJNmA7zeOMPCJ 4uh/t7iNt4l7rvd6u8h/vMmH2teSl6eH3Td+RsCTj/eKiNmVKeCUL3icKOB9LiB413l9s3iAWigE uSl8nfl5TwiYJtgCY+B5WuiSCDmVQrCG0nmZj3d7UDmW2kCNZhB5f2cJIrmf/vmfADocQQAAOw== ------=_NextPart_000_01BC2B74.89D1CCC0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 14:54:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lima.epix.net (lima.epix.net [199.224.64.56]) by hub.freebsd.org (Postfix) with ESMTP id 7CC1037B417 for ; Sun, 23 Dec 2001 14:54:47 -0800 (PST) Received: from there (clsm-58ppp25.epix.net [209.74.58.25]) by lima.epix.net (8.12.1/2001112001/PL) with SMTP id fBNMsj7h026162 for ; Sun, 23 Dec 2001 17:54:46 -0500 (EST) Message-Id: <200112232254.fBNMsj7h026162@lima.epix.net> Content-Type: text/plain; charset="iso-8859-1" From: Dave Kaufman Reply-To: daverk@epix.net To: freebsd-questions@freebsd.org Subject: tarballs, etc. Date: Sun, 23 Dec 2001 17:54:44 -0500 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ok, how do i uncompress a tarball? when i use tar -x.... i get a message about not being able to initialize the device sa0. i presume it's looking for a tape drive. per the help, if i try to filter through bzip2 or unbzip2 or ungzip i get the same thing. i'm sure this is very simple but i'm not finding it. have two files i want to undo. one is .tar.bz2 the other is a .tar.gz. all help is much appreciated. and happy holidays to all who are celebrating at this time of year. Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15: 2:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 16CA937B417 for ; Sun, 23 Dec 2001 15:02:25 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id RAA05970; Sun, 23 Dec 2001 17:02:22 -0600 (CST) Message-Id: <3.0.5.32.20011223170219.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Sun, 23 Dec 2001 17:02:19 -0600 To: daverk@epix.net, freebsd-questions@FreeBSD.ORG From: jacks@sage-american.com Subject: Re: tarballs, etc. In-Reply-To: <200112232254.fBNMsj7h026162@lima.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You need to add the -f switch for "file".... #tar -xf At 05:54 PM 12.23.2001 -0500, Dave Kaufman wrote: >ok, how do i uncompress a tarball? when i use tar -x.... i get a message >about not being able to initialize the device sa0. i presume it's looking for >a tape drive. per the help, if i try to filter through bzip2 or unbzip2 or >ungzip i get the same thing. i'm sure this is very simple but i'm not finding >it. > >have two files i want to undo. one is .tar.bz2 the other is a .tar.gz. > >all help is much appreciated. > >and happy holidays to all who are celebrating at this time of year. >Dave > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15: 3:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gate.volant.org (gate.volant.org [207.111.218.246]) by hub.freebsd.org (Postfix) with ESMTP id 2539037B41B for ; Sun, 23 Dec 2001 15:03:18 -0800 (PST) Received: from 216-55-134-176.dsl.san-diego.abac.net ([216.55.134.176] helo=asimov) by gate.volant.org with asmtp (TLSv1:DES-CBC3-SHA:168) (Exim 3.33 #1) id 16IHeG-000971-00; Sun, 23 Dec 2001 15:03:16 -0800 Date: Sun, 23 Dec 2001 15:03:13 -0800 From: Pat Lashley To: daverk@epix.net, freebsd-questions@freebsd.org Subject: Re: tarballs, etc. Message-ID: <1285230000.1009148593@asimov> In-Reply-To: <200112232254.fBNMsj7h026162@lima.epix.net> References: <200112232254.fBNMsj7h026162@lima.epix.net> X-Mailer: Mulberry/2.1.1 (SunOS/SPARC Demo) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --On Sunday, December 23, 2001 05:54:44 PM -0500 Dave Kaufman wrote: > ok, how do i uncompress a tarball? when i use tar -x.... i get a message > about not being able to initialize the device sa0. i presume it's looking > for a tape drive. per the help, if i try to filter through bzip2 or > unbzip2 or ungzip i get the same thing. i'm sure this is very simple but > i'm not finding it. > > have two files i want to undo. one is .tar.bz2 the other is a .tar.gz. What you're looking for is the -f parameter. Try the following commands man tar tar xvfz mumble.tar.gz bunzip2 mumble.tar.bz2 | tar xvf - (Replace 'mumble' as necessary to get the names of the files you are trying to unpack.) -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15: 7: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp2out.rdc-nyc.rr.com (nycsmtp2out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id 4B27C37B417 for ; Sun, 23 Dec 2001 15:07:06 -0800 (PST) Received: from scott1.nyc.rr.com (24-168-25-8.nyc.rr.com [24.168.25.8]) by nycsmtp2out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id fBNN74ia017042; Sun, 23 Dec 2001 18:07:05 -0500 Message-Id: <5.1.0.14.0.20011223180550.00c1bec8@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 23 Dec 2001 18:07:03 -0500 To: daverk@epix.net, freebsd-questions@FreeBSD.ORG From: Scott Subject: Re: tarballs, etc. In-Reply-To: <200112232254.fBNMsj7h026162@lima.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 17:54 2001/12/23 -0500, Dave Kaufman wrote: >ok, how do i uncompress a tarball? when i use tar -x.... i get a message >about not being able to initialize the device sa0. i presume it's looking for >a tape drive. per the help, if i try to filter through bzip2 or unbzip2 or >ungzip i get the same thing. i'm sure this is very simple but i'm not finding >it. > >have two files i want to undo. one is .tar.bz2 the other is a .tar.gz. I have a page on this for Linux newbies folks, but should work for FreeBSD as well http://home.nyc.rr.com/computertajutsu/tarball.html (Remember it's for Linux, so ignore the rpm stuf) HTH Scott >all help is much appreciated. > >and happy holidays to all who are celebrating at this time of year. >Dave > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15:12:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp2out.rdc-nyc.rr.com (nycsmtp2out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id 821F937B416 for ; Sun, 23 Dec 2001 15:12:23 -0800 (PST) Received: from scott1.nyc.rr.com (24-168-25-8.nyc.rr.com [24.168.25.8]) by nycsmtp2out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id fBNNCKia018415; Sun, 23 Dec 2001 18:12:21 -0500 Message-Id: <5.1.0.14.0.20011223181131.00c24e48@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 23 Dec 2001 18:12:15 -0500 To: daverk@epix.net, freebsd-questions@FreeBSD.ORG From: Scott Subject: Re: tarballs, etc. In-Reply-To: <5.1.0.14.0.20011223180550.00c1bec8@pop-server.nyc.rr.com> References: <200112232254.fBNMsj7h026162@lima.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 18:07 2001/12/23 -0500, Scott wrote: >I have a page on this for Linux newbies folks, but should work for FreeBSD >as well >http://home.nyc.rr.com/computertajutsu/tarball.html > >(Remember it's for Linux, so ignore the rpm stuf) Sorry, bad url It's http://home.nyc.rr.com/computertaijutsu/tarball.html Scott Robbins, the bad typist To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15:15:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id D640737B405 for ; Sun, 23 Dec 2001 15:15:22 -0800 (PST) Received: from colt.ncptiddische.net (ppp-187.wobline.de [212.68.69.198]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBNNEn800302; Mon, 24 Dec 2001 00:14:54 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBNNFKX52441; Mon, 24 Dec 2001 00:16:00 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBNNCBS00688; Mon, 24 Dec 2001 00:12:11 +0100 (CET) (envelope-from nils) Date: Mon, 24 Dec 2001 00:12:11 +0100 From: Nils Holland To: Dave Kaufman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: tarballs, etc. Message-ID: <20011224001211.A637@tisys.org> Mail-Followup-To: Dave Kaufman , freebsd-questions@FreeBSD.ORG References: <200112232254.fBNMsj7h026162@lima.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200112232254.fBNMsj7h026162@lima.epix.net>; from daverk@epix.net on Sun, Dec 23, 2001 at 05:54:44PM -0500 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 12:09AM up 38 mins, 1 user, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 05:54:44PM -0500, Dave Kaufman stood up and spoke: > ok, how do i uncompress a tarball? when i use tar -x.... i get a message > about not being able to initialize the device sa0. i presume it's looking for > a tape drive. per the help, if i try to filter through bzip2 or unbzip2 or > ungzip i get the same thing. i'm sure this is very simple but i'm not finding > it. The following should work for .tar.gz: tar xzvfp file.tar.gz for tar.bz2: tar xjvfp file.tar.bz2 Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 15:25:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rpi.edu (mail.rpi.edu [128.113.22.40]) by hub.freebsd.org (Postfix) with ESMTP id 7EAAA37B416 for ; Sun, 23 Dec 2001 15:25:10 -0800 (PST) Received: from [128.113.24.47] (gilead.acs.rpi.edu [128.113.24.47]) by mail.rpi.edu (8.11.3/8.11.3) with ESMTP id fBNNP8e17364; Sun, 23 Dec 2001 18:25:09 -0500 Mime-Version: 1.0 X-Sender: drosih@mail.rpi.edu Message-Id: In-Reply-To: <3C224AA6.6B18B10F@unisys.com> References: <3C224AA6.6B18B10F@unisys.com> Date: Sun, 23 Dec 2001 18:25:06 -0500 To: Doug Fee , freebsd-questions@FreeBSD.ORG From: Garance A Drosihn Subject: Re: Printing to File Content-Type: text/plain; charset="us-ascii" ; format="flowed" X-Scanned-By: MIMEDefang 2.1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 3:31 PM -0500 12/20/01, Doug Fee wrote: >OK, Call me crazy, but I'm trying to print to file. I tried using >an input filter, but I don't know if this is even the right >direction to go. Any advice would be appreciated. I expect this should be doable, if you pay attention to file permissions and the such-like. [I may regret saying this, but] What problems were you having? -- Garance Alistair Drosehn = gad@eclipse.acs.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:32:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 89EF337B419 for ; Sun, 23 Dec 2001 16:32:41 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.206]) by services.webwarrior.net (Postfix) with ESMTP id CE2864AC for ; Sun, 23 Dec 2001 18:32:22 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 6370C386E; Sun, 23 Dec 2001 18:32:50 +0000 (GMT) Date: Sun, 23 Dec 2001 18:32:50 +0000 From: Josh Paetzel To: Lord Raiden Cc: freebsd-questions@FreeBSD.ORG Subject: Re: BSD emergency shutdown of all servers Message-ID: <20011223183250.E237@twincat.vladsempire.net> Mail-Followup-To: Lord Raiden , freebsd-questions@FreeBSD.ORG References: <4.2.0.58.20011223163417.0097c610@pop.netzero.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <4.2.0.58.20011223163417.0097c610@pop.netzero.net>; from raiden23@netzero.net on Sun, Dec 23, 2001 at 04:44:57PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 04:44:57PM -0500, Lord Raiden wrote: > How would you go about doing an emergency shutdown of all of your BSD > servers say if something were happening that all of your servers HAD to be > shut down in 2 minutes or less regardless. SSH'ing to all the boxes at the > same time would be kinda impossible in that limited time. I'm more looking > at the old "Panic Button" idea. > > The idea came to me today and I thought it would be very useful. I don't > see a need for it right in the foreseeable future, but then again, I didn't > see the need for a UPS either until one of my boxes got whacked by a power > surge. So as a little preventative forethought, I want something that can > remotely shut down all of our BSD servers within a 2 minute window so that > we can go power off at exactly 2 minutes and put the whole NOC dark within > 120 seconds of the "Panic Alert" so to speak. Plus being able to execute > all of this from a basic script would be great too. Kinda a single option > to execute thing. The less things I have to do in that 2 minute panic > window, the better. > > One use I can see for this is if severe weather was approaching and we > suddenly got an evacuation warning (say a tornado was coming or something) > then that 2 minute panic shutdown would be priceless. Now if the NOC got > annihilated by a tornado that would be kinda a pointless exercise, but > under other circumstances I can see where that would be a good thing. > > I'm also wanting this to be able to be done through an account other than > ROOT. One that I can assign the option to only be able to execute 3 basic > panic commands. One of them being the "shutdown -h now" command. The > other two might be things like if we were being hacked I could fire that > off to the server(s) in question and shut down all access to them till we > could get rid of the hacker, or track him down and report him. > > Again, I know this is a lengthy question, but I wanted to be as clear as I > could. Thanks in advance. I hope this gives you something to think about > too. I'm also working on a solution for the NT/2k portion of our network. :) There are a couple of things that you could do. One might be a script that you can run that automagically ssh's into all the machines and shuts them down. Another might be the "big red switch" option. They were in vogue for a while as something you could either telnet or dial into and physically cut the power to your machines. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:34:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from Stalker.alfacom.net (Stalker.Alfacom.net [193.108.124.1]) by hub.freebsd.org (Postfix) with ESMTP id C766537B417 for ; Sun, 23 Dec 2001 16:34:13 -0800 (PST) Received: from kushnir1.kiev.ua (dup-124-95.Alfacom.net [193.108.124.95]) by Stalker.alfacom.net (8.12.1/8.12.1) with ESMTP id fBO0Y5JF006098 for ; Mon, 24 Dec 2001 02:34:07 +0200 (EET) Received: from localhost (volodya@localhost) by kushnir1.kiev.ua (8.11.6/8.11.6) with ESMTP id fBO0Y7e88474 for ; Mon, 24 Dec 2001 02:34:08 +0200 (EET) (envelope-from vkushnir@alfacom.net) X-Authentication-Warning: kushnir1.kiev.ua: volodya owned process doing -bs Date: Mon, 24 Dec 2001 02:34:05 +0200 (EET) From: Vladimir Kushnir X-X-Sender: volodya@kushnir1.kiev.ua To: freebsd-questions@FreeBSD.ORG Subject: imaxdiv(3) in C++ code? (fwd) Message-ID: <20011224023241.K57340-100000@kushnir1.kiev.ua> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've just encountered this problem: C++ programs here (FreeBSD-CURRENT, probably other versions as well) using imaxdiv(3) doesn't link - undefined references to imaxdiv. Everything compiles/runs perfectly all right if I compile in /usr/src/lib/libc/stdlib/imaxdiv.c as well, but this isn't nice, is it? :-) Is this a bug or I simply don't understand something? BTW, program I'm talking about is x2divx (see http://www.emulinks.de/divx/) - nice console mpeg/avi to divx converter (I remember somebody asked a while ago). Oh, incidentally, would anybody advice on a simplest way to determine if CPU is MMX-capable (for configure script, like `cat /proc/cpuinfo` under Linux)? TIA, Vladimir -- Vladimir Kushnir - vkushnir@Alfacom.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:41:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout02.sul.t-online.com (mailout02.sul.t-online.com [194.25.134.17]) by hub.freebsd.org (Postfix) with ESMTP id 3A21037B416 for ; Sun, 23 Dec 2001 16:41:40 -0800 (PST) Received: from fwd09.sul.t-online.de by mailout02.sul.t-online.de with smtp id 16IJBT-0003B1-00; Mon, 24 Dec 2001 01:41:39 +0100 Received: from pc5.abc (520067998749-0001@[217.233.117.121]) by fmrl09.sul.t-online.com with esmtp id 16IJBP-0UN4uuC; Mon, 24 Dec 2001 01:41:35 +0100 Received: (from nicolas@localhost) by pc5.abc (8.11.6/8.11.6) id fBO0fYJ04821 for freebsd-questions@FreeBSD.ORG; Mon, 24 Dec 2001 01:41:34 +0100 (CET) (envelope-from list@rachinsky.de) Date: Mon, 24 Dec 2001 01:41:34 +0100 From: Nicolas Rachinsky To: freebsd-questions@FreeBSD.ORG Subject: bad performance with mount_msdos Message-ID: <20011224004134.GA4729@pc5.abc> Mail-Followup-To: Nicolas Rachinsky , freebsd-questions@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.23.2i X-Powered-by: FreeBSD X-Homepage: http://www.rachinsky.de X-PGP-Keyid: C11ABC0E X-PGP-Fingerprint: 19DB 8392 8FE0 814A 7362 EEBD A53B 526A C11A BC0E X-PGP-Key: http://www.rachinsky.de/nicolas/nicolas_rachinsky.asc X-Sender: 520067998749-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hallo, I need to write to an fat32 Filesystem. I created the filesystem with newfs_msdos using the defaults. The problem is, I achieve only 0,35MB/s while copying from /dev/zero. When using FFS on the same HD, I achieve a transfer speed of about 8MB/s. But I need FAT32 because the HD is intended to be used for data transfer between Windows and FreeBSD. Thanks for any ideas. Nicolas PS: FreeBSD 4.4-Release, IDE HD PPS: Please CC since I'm not on this list, thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:43:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from 24sextv.com (catv-kwangjoo-210205028145.usr2.hananet.net [210.205.28.145]) by hub.freebsd.org (Postfix) with SMTP id 8EE7C37B41B for ; Sun, 23 Dec 2001 16:43:52 -0800 (PST) Reply-To: 24sextv@24sextv.com From: 24sextv <24sextv@24sextv.com> To: Subject: [¼ºÀα¤°í¸ÞÀÏ] ¾È³çÇϼ¼¿ä. ¼ºÀθ¸ÀÇ ¸ÞÀÏÀÔ´Ï´Ù. Mime-Version: 1.0 Content-Type: text/html; charset="ks_c_5601-1987" Date: Mon, 24 Dec 2001 09:45:41 +0900 X-Priority: 3 X-Mailer: Mailtouch 1.0 Message-Id: <20011224004352.8EE7C37B41B@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG

¾È³çÇϼ¼¿ä.  

¸ÕÁ® ¿øÄ¡¾ÊÀº ¸ÞÀÏ º¸³½Á¡ »ç°úµå¸³´Ï´Ù.

º» ¸ÞÀÏÀº Á¤º¸Åë½Å À±¸®À§¿øȸ¿¡ Áöħ¿¡ µû¶ó ¼ºÀα¤°í¸ÞÀÏÀÓÀ» ¾Ë·Áµå¸³´Ï´Ù.

º» ¸ÞÀÏÀº ¼ö½Å°ÅºÎ¿¡ µî·ÏÇØ ÁÖ½Ã¸é ´Ù½Ã´Â ¹ÞÁö ¾ÊÀ¸½Ç °Ì´Ï´Ù.

http://24sextv.wo.to   ·Î ¿Íº¸¼¼¿ä.

Àý´ë ¼ºÀθ¸ ¿À¼Å¾ß ÇÕ´Ï´Ù.

[¼ö½Å°ÅºÎ]

 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:45:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.atjeu.com (ns1.atjeu.com [12.105.168.2]) by hub.freebsd.org (Postfix) with ESMTP id 2D5EE37B405 for ; Sun, 23 Dec 2001 16:45:17 -0800 (PST) Received: from alex (pool-141-154-234-76.bos.east.verizon.net [141.154.234.76]) by [12.105.168.7] (8.10.2/8.10.2) with SMTP id fBO0jHu10627 for ; Sun, 23 Dec 2001 17:45:17 -0700 From: "Alex Sommerfeld" To: Subject: Date: Sun, 23 Dec 2001 19:40:52 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG does it support dual processors? Alex B Sommerfeld - Owner Gateway Productions - Professional Disc Jockey 41 Otis St. Danvers Ma. 01923 Home Phone: (978) 777-1285 Work Phone: (978) 762-4661 Cell Phone: (978) 502-5733 E-mail: alex@djgateway.com Website: http://djgateway.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 16:56:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc24.worldnet.att.net (mtiwmhc24.worldnet.att.net [204.127.131.49]) by hub.freebsd.org (Postfix) with ESMTP id 75D3237B417 for ; Sun, 23 Dec 2001 16:56:20 -0800 (PST) Received: from columbia ([12.93.215.60]) by mtiwmhc24.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011224005619.MPKD13117.mtiwmhc24.worldnet.att.net@columbia>; Mon, 24 Dec 2001 00:56:19 +0000 From: "Andrew C. Hornback" To: "Alex Sommerfeld" , Subject: FreeBSD & SMP (Was RE: (no subject)) Date: Sun, 23 Dec 2001 19:55:41 -0500 Message-ID: <001401c18c15$b5c3e280$6600000a@ach.domain> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 In-Reply-To: Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Alex Sommerfeld > Sent: Sunday, December 23, 2001 7:41 PM > To: freebsd-questions@FreeBSD.ORG > Subject: > > does it support dual processors? Yes, and quite well. I've personally admin'd machines with two processors, and seen FreeBSD running on a machine with 6 processors without a problem. --- Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 17: 6: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from molly.intercom.net (molly.intercom.net [216.240.106.84]) by hub.freebsd.org (Postfix) with ESMTP id 0DCBE37B405 for ; Sun, 23 Dec 2001 17:06:06 -0800 (PST) Received: from cross (hh1117127.direcpc.com [206.71.117.127]) by molly.intercom.net (8.12.1/8.12.1) with SMTP id fBO16cpk023793 for ; Sun, 23 Dec 2001 20:06:39 -0500 (EST) Message-ID: <001401c18c16$d692ab30$0273150a@woodstock.lanalyse.com> From: "Ron Hensley" To: References: <200112232254.fBNMsj7h026162@lima.epix.net> <20011224001211.A637@tisys.org> Subject: Emergency Boot Disk Date: Sun, 23 Dec 2001 20:03:41 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 How do I make an emergency boot disk, that will load the current kernel/drive? I know I can use the rescue image and the 2nd CD to do a resuce repair, but that will load the file system off the CD/Floppy, not the one off my current hard drive. Is there a way to make a boot disk, like rathern then using the MBR to load up? -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBPCZ+61Fb04N5DzUjEQJRFgCgoe+B1Sj6njoiFc1Qj7G3sgjHV8MAnjAu Q1QEsanVpeZNO89PKX675VOQ =P8Kb -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 17:35:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dastardly.newsbastards.org.72.27.172.IN-addr.ARPA.NetScum.dyndns.dk (pop-be-10-2-dialup-85.freesurf.ch [194.230.121.85]) by hub.freebsd.org (Postfix) with ESMTP id CEF2837B417 for ; Sun, 23 Dec 2001 17:35:15 -0800 (PST) Received: (from root@localhost) by crotchety.newsbastards.org (8.11.6/8.11.6) id fBO0R9G52799; Mon, 24 Dec 2001 01:27:09 +0100 (CET) (envelope-from bounce@dcf77-zeit.netscum.dyndns.dk) Date: Mon, 24 Dec 2001 01:27:09 +0100 (CET) Message-Id: <200112240027.fBO0R9G52799@crotchety.newsbastards.org> To: freebsd-questions@freebsd.org From: BOUWSMA Beery Organization: Men not wearing any pants that dont shave X-Hacked: via telnet to your port 25, what else? X-Internet-Access-Provided-By: TDC Suisse AG, Rumlang X-NetScum: Yes X-One-And-Only-Real-True-Fluffy: No Subject: mergemaster and TEMPROOT/usr/obj/... Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [replies sent directly to me may timeout and bounce, since I'm not online as often as I should be, but I'll check the list archives] (I sent my first mail concerning mergemaster to questions, so I may as well send this one here as well. Since I don't know what list would be better, and this message contains no question and therefore is off-topic, let me add a question, which is: which list is the proper forum for a message like this? ) Holiday greetz As part of the running of `mergemaster', it creates its own build object directory in TEMPROOT in the process of building distribution. At present, only sendmail uses this. When mergemaster runs, it detects that files in its own object directory may be missing from the system, when it would be better (IMHO) if it ignores the contents of this object directory. I do not know if there is any future chance of anything desirable popping up somewhere in /usr/obj, particularly since that's an easy directory to override (like I've done), but my guess is no. Three `find' lines need to be changed to ignore TEMPROOT/usr/obj, and I'll bet there's a better way to do this, but here's what I came up with: -- original mergemaster.sh: 696:for COMPFILE in `find . -type f -size +0`; do 775:TEST_FOR_FILES=`find ${TEMPROOT} -type f -size +0 2>/dev/null` 778: find "${TEMPROOT}" -type f -size +0 -- my changes: 711:for COMPFILE in `find . -type f \\! -regex "\\./usr/obj/.*"`; do 793:TEST_FOR_FILES=`find ${TEMPROOT} -type f \\! -regex "${TEMPROOT}/usr/obj/.*" 2>/dev/null` 797: find "${TEMPROOT}" -type f \! -regex "${TEMPROOT}/usr/obj/.*" Note that these hacks also address the problem of empty files being ignored by mergemaster, as I mentioned earlier. Alternatively, it just occurred to me that perhaps `rm -r' could be run on ${TEMPROOT}/usr/obj after the build, unless there's a reason to keep these files. Also, looking at the contents of TEMPROOT, nothing is done with any symbolic links (easy to see with mergemaster -D), so I propose a loop be added to check these and fix or create them if needed. Plus the loop I mentioned some time back to check ownership and permissions... thanks barry bouwsma To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 17:42:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.freejpn.com (ns1.freejpn.com [211.10.156.2]) by hub.freebsd.org (Postfix) with ESMTP id 2A7D437B41B for ; Sun, 23 Dec 2001 17:42:38 -0800 (PST) Received: from x9z0o0 (ppp214-160.freejpn.com [211.10.160.214]) by ns1.freejpn.com (8.9.3/FreeJpn-1.0) with SMTP id KAA10749 for freebsd-questions@FreeBSD.ORG; Mon, 24 Dec 2001 10:42:36 +0900 (JST) From: yfaag@freejpn.com To: freebsd-questions@FreeBSD.ORG Message-ID: <20011224.1044110494.babaq@yfaag-freejpn.com> Date: Mon, 24 Dec 2001 10:44:11 +0900 Subject: =?ISO-2022-JP?B?GyRCJCpLOyQ3JCQkSCQzJG0bKEI=?= MIME-Version: 1.0 X-Mail-Agent: BSMTP DLL Dec 17 2000 by Tatsuo Baba Content-Type: text/plain; charset=ISO-2022-JP Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG $B%[!<%`%Z!<%8$r8+$5$;$FD:$$$F!"%a!<%kCW$7$^$7$?!#(B $B$b$7$+$7$?$i!";d$I$b$K5.%5%$%H$N(BPR$B!&%"%/%;%9%"%C%W$G$46(NO$5$;$F(B $BD:$1$J$$$+$H;W$$%a!<%kCW$7$^$7$?!#(B $B0lEY!"Ev%5%$%H$r$4Mw$K$J$C$FD:$1$l$P$H$*$b$$$^$9!#(B $B$*K;$7$$$H$3$mFI$s$GD:$-$"$j$,$H$&$4$6$$$^$7$?!#(B http://www.netpp.ee.mu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 17:57:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from domain.com (44.mujb.dlls.dllstxbk.dsl.att.net [12.98.249.44]) by hub.freebsd.org (Postfix) with SMTP id 8B3CA37B41C for ; Sun, 23 Dec 2001 17:57:11 -0800 (PST) Received: (qmail 18260 invoked by alias); 24 Dec 2001 01:57:51 -0000 Received: from unknown (HELO there) (127.0.0.1) by loopback with SMTP; 24 Dec 2001 01:57:51 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Jason Halbert Reply-To: jason@jason-n3xt.org To: questions@freebsd.org Subject: CVSup Servers Date: Mon, 24 Dec 2001 01:57:50 +0000 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011224015711.8B3CA37B41C@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm having trouble connecting to all but a couple of the CVSup servers. I normally use cvsup2 and cvsup3. Anything going on? Jason jason@jason-n3xt.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 18:15:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.austclear.com.au (ns2.austclear.com.au [192.43.185.70]) by hub.freebsd.org (Postfix) with ESMTP id 4678D37B416 for ; Sun, 23 Dec 2001 18:15:35 -0800 (PST) Received: from tungsten.austclear.com.au (tungsten.austclear.com.au [192.168.166.65]) by ns2.austclear.com.au (8.11.2/8.11.3) with ESMTP id fBO2FXl31826 for ; Mon, 24 Dec 2001 13:15:34 +1100 (EST) (envelope-from ahl@austclear.com.au) Received: from tungsten (tungsten [192.168.166.65]) by tungsten.austclear.com.au (8.9.3/8.9.3) with ESMTP id NAA15748; Mon, 24 Dec 2001 13:15:33 +1100 (EST) Message-Id: <200112240215.NAA15748@tungsten.austclear.com.au> X-Mailer: exmh version 2.1.1 10/15/1999 To: freebsd-questions@freebsd.org Subject: compact flash cards Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 24 Dec 2001 13:15:33 +1100 From: Tony Landells Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I know someone posted some information on accessing Compact Flash cards in the last few weeks, but I've been trying for a few days to search the mailing list archives and it keeps telling me the archive is unavailable. So I apologise if this is a rehash, but I have some photos to sort out before Christmas... A friend has a compact flash-based camera and a USB flash reader (a SanDisk ImageMate SDDR-05a). I can connect the reader to my USB port, I can see that it's detected by the USB daemon, but I'm not sure where to go from there... I seem to recall seeing it had something to do with the umass driver, and I can see that the umass module is loaded, but I can't locate a device to mount or some other way to access the files... Any suggestions would be appreciated, though I have to wait until I get home to try this out, so I basically have one shot at it... I'm running FreeBSD 4.2R. Thanks, Tony -- Tony Landells Senior Network Engineer Ph: +61 3 9677 9319 Australian Clearing Services Pty Ltd Fax: +61 3 9677 9355 Level 4, Rialto North Tower 525 Collins Street Melbourne VIC 3000 Australia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 18:37:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id CC8A837B419 for ; Sun, 23 Dec 2001 18:37:56 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.206]) by services.webwarrior.net (Postfix) with ESMTP id 27955233 for ; Sun, 23 Dec 2001 20:37:39 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 93AC5386E; Sun, 23 Dec 2001 20:37:47 +0000 (GMT) Date: Sun, 23 Dec 2001 20:37:47 +0000 From: Josh Paetzel To: Jason Halbert Cc: questions@FreeBSD.ORG Subject: Re: CVSup Servers Message-ID: <20011223203747.H237@twincat.vladsempire.net> References: <20011224015711.8B3CA37B41C@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011224015711.8B3CA37B41C@hub.freebsd.org>; from jason@jason-n3xt.org on Mon, Dec 24, 2001 at 01:57:50AM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 01:57:50AM +0000, Jason Halbert wrote: > I'm having trouble connecting to all but a couple of the CVSup > servers. I normally use cvsup2 and cvsup3. Anything going on? > > Jason > jason@jason-n3xt.org > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Yeah. 4.5-PRERELEASE is out and people want to be the first on their block with it. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 19:14: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-144.quicksilver.net.nz [202.89.142.144]) by hub.freebsd.org (Postfix) with ESMTP id 1BA9D37B417; Sun, 23 Dec 2001 19:13:56 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBO3Cx157407; Mon, 24 Dec 2001 16:12:59 +1300 (NZDT) (envelope-from jonc) Date: Mon, 24 Dec 2001 16:12:57 +1300 From: Jonathan Chen To: Il%j Sipicin Cc: ports@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: numerous IMAP questions... Message-ID: <20011224161257.A57370@grimoire.chen.org.nz> References: <20011223144012.T713-100000@sol.chel.skbkontur.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011223144012.T713-100000@sol.chel.skbkontur.ru>; from ilia@chel.skbkontur.ru on Sun, Dec 23, 2001 at 02:43:52PM +0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 02:43:52PM +0500, Il%j Sipicin wrote: > Well, > > 1) is there an alternative for imap-uw ? There's Courier IMAP, but the folders it creates are MH mailboxes (ie files & directories) instead of UNIX-mailfolders (ie one file containing several emails). > 2) how to make imap-uw more verbose ? > > 3) how to run imap-uw without inetd ? > > 4) do I really need an "mbox" driver ? > (I permanently see "moved XXX bytes from mbox..." and > "moved XXX bytes to mbox...") The "mbox driver" allows imap-uw to recognise UNIX mailboxes which live in /var/mail. The "moved ... from mbox" is some weird imap-uw `feature' that will move mail from /var/mail to ~/mbox *if* it sees a ~/mbox. If you don't want this, all you have to do is to move all the mail from ~/mbox to /var/mail/user. ie: 1. make sure imapd is stopped 2. make sure /var/mail/user is 0 bytes 3. mv ~/mbox /var/mail/user At which point when imap-uw starts up again, it will use /var/mail/user as the INBOX and won't attempt to move mail out of it. -- Jonathan Chen ---------------------------------------------------------------------- Don't worry about avoiding temptation, as you grow older, it starts avoiding you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 19:15:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from w2xo.pgh.pa.us (18.gibs5.xdsl.nauticom.net [209.195.184.19]) by hub.freebsd.org (Postfix) with ESMTP id 5EED437B417 for ; Sun, 23 Dec 2001 19:15:21 -0800 (PST) Received: from there (jimslaptop.int [192.168.5.9]) by w2xo.pgh.pa.us (8.11.6/8.11.3) with SMTP id fBO3FLA08834; Sun, 23 Dec 2001 22:15:22 -0500 (EST) (envelope-from durham@w2xo.pgh.pa.us) Message-Id: <200112240315.fBO3FLA08834@w2xo.pgh.pa.us> Content-Type: text/plain; charset="iso-8859-1" From: Jim Durham Reply-To: durham@w2xo.pgh.pa.us To: Lord Raiden , freebsd-questions@FreeBSD.ORG Subject: Re: BSD emergency shutdown of all servers Date: Sun, 23 Dec 2001 22:14:42 -0500 X-Mailer: KMail [version 1.3] References: <4.2.0.58.20011223163417.0097c610@pop.netzero.net> In-Reply-To: <4.2.0.58.20011223163417.0097c610@pop.netzero.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 23 December 2001 04:44 pm, Lord Raiden wrote: > How would you go about doing an emergency shutdown of all of your > BSD servers say if something were happening that all of your > servers HAD to be shut down in 2 minutes or less regardless. > SSH'ing to all the boxes at the same time would be kinda impossible > in that limited time. I'm more looking at the old "Panic Button" > idea. > > The idea came to me today and I thought it would be very useful. > I don't see a need for it right in the foreseeable future, but then > again, I didn't see the need for a UPS either until one of my boxes > got whacked by a power surge. So as a little preventative > forethought, I want something that can remotely shut down all of > our BSD servers within a 2 minute window so that we can go power > off at exactly 2 minutes and put the whole NOC dark within 120 > seconds of the "Panic Alert" so to speak. Plus being able to > execute all of this from a basic script would be great too. Kinda > a single option to execute thing. The less things I have to do in > that 2 minute panic window, the better. > > One use I can see for this is if severe weather was approaching > and we suddenly got an evacuation warning (say a tornado was coming > or something) then that 2 minute panic shutdown would be priceless. > Now if the NOC got annihilated by a tornado that would be kinda a > pointless exercise, but under other circumstances I can see where > that would be a good thing. > > I'm also wanting this to be able to be done through an account > other than ROOT. One that I can assign the option to only be able > to execute 3 basic panic commands. One of them being the "shutdown > -h now" command. The other two might be things like if we were > being hacked I could fire that off to the server(s) in question and > shut down all access to them till we could get rid of the hacker, > or track him down and report him. > > Again, I know this is a lengthy question, but I wanted to be as > clear as I could. Thanks in advance. I hope this gives you > something to think about too. I'm also working on a solution for > the NT/2k portion of our network. :) OK...this is where the versatility of FreeBSD will pay off for you. Create a user "shutdown" on all machines. Pick one machine as a "master". Generate ssh keys for "shutdown" on all machines. Put the identity.pub of the shutdown user on the master machine in the authorized-keys file on each of the "slave" machines. Install "sudo" on all machines. Allow user "shutdown" to have sudo privs to run "shutdown -p" . Now, just write a little shell script on the master..,which runs as user shutdown. .. #!/bin/sh ssh slave1 "sudo shutdown -p" ssh slave2 "sudo shutdown -p" ... and so forth. I haven't tried this, but it should work very quickly, as no passwords will be asked if you install the keys and they all should come down within secs of each other (or millisecs, probably). You could get more elaborate and have a daemon running on each machine that listens on a port and runs "shutdown -p" on receipt of some special packet, but it's probably overkill Well, there are two ideas... I'm sure you'll get better ones.. -Jim Durham -Jim Durham To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 19:16:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 56C4137B416 for ; Sun, 23 Dec 2001 19:16:12 -0800 (PST) Received: from Tom_Parquette [24.24.29.69] by myrealbox.com with NIMS ModWeb Module; Sun, 23 Dec 2001 22:16:08 -0500 Subject: Re: Mount floppy command From: Tom Parquette To: barbish@a1poweruser.com, Cc: questions@FreeBSD.ORG, Date: Sun, 23 Dec 2001 22:16:08 -0500 X-Mailer: NIMS ModWeb Module X-Sender: Tom_Parquette MIME-Version: 1.0 Message-ID: <1009163768.68ea1ff2Tom_Parquette@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Joe, I'm not an expert on this but here is what I know... I think the piece you are missing is the update to /etc/fstab. =20 As I understand it, this is where the magic happens with the mount command.= (You will note that /cdrom is also there.) I was able to mount and read a floppy with the mount_msdos /dev/fd0 /mnt co= mmand as root. When I tried to add this to my fstab, and issue mount /mn= t it didn't work right. What I put in my fstab was "/dev/fd0 /mnt msdos = rw 0 0". I do not have any experience with dos floppies under FreeBSD so I am now at= the limit of my knowledge. Maybe one of the gurus can pick up from here= . Cheers... -----Original Message----- From: "Joe & Fhe Barbish" To: "FBSD Questions" Date: Sat, 22 Dec 2001 10:54:57 -0500 Subject: Mount floppy command I issue mount_msdos /dev/fd0 /mnt to mount floppy drive A. The mount /cdrom command mounts my cdrom drive. I tried mount /floppy but no such luck. Is there some short cut command like for cdrom? Could I bury the mount_msdos /dev/fd0 /mnt command In a script? What would it look like? Where must it be placed to work? Thanks Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message Try not. Do or do not. There is no try. -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20: 5:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 51B0837B417 for ; Sun, 23 Dec 2001 20:05:14 -0800 (PST) Received: from sdn-ar-003dcwashp153.dialsprint.net ([206.133.21.89] helo=moo.holy.cow) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 16IMMS-00014u-00 for freebsd-questions@freebsd.org; Sun, 23 Dec 2001 20:05:13 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id BE8AD50D0E; Sun, 23 Dec 2001 23:06:39 -0500 (EST) Date: Sun, 23 Dec 2001 23:06:39 -0500 From: parv To: f-q Subject: how to recreate a mount point? Message-ID: <20011223230639.A29277@moo.holy.cow> Mail-Followup-To: f-q Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi people, in sheer stupidity i deleted the /cdrw mount point thinking of it just an empty directory... # fgrep '/cdrw' /etc/fstab /dev/ad0s3e /cdrw ufs rw,noauto 2 2 # df -i /dev/ad0s3e Filesystem 1K-blocks Used Avail Capacity iused ifree %iused Mounted on /dev/ad0s3e 714447 1 657291 0% 3 179581 0% ...how can i recreate it? nondestructively (to other file systems) of course. i couldn't find (or missed) anything in manpages for disklabel, fstab, fdisk, mount, newfs. i was hoping it to be in manpages related to mount or fstab. where can i find this information? thanks much. -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20:18: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from outmta008.topica.com (outmta008.topica.com [64.125.140.217]) by hub.freebsd.org (Postfix) with SMTP id 0C2A837B417 for ; Sun, 23 Dec 2001 20:18:05 -0800 (PST) To: questions@freebsd.org From: The Best Hair and Body Products Subject: Hair Lines, The Best Hair and Body Products Newsletter Date: Sun, 23 Dec 2001 20:12:48 -0800 Message-ID: <19184.800011951.526195673-1463792126-1009167407@topica.com> X-Topica-Id: <1009167181.svc004.7734.1000161> X-Topica-Loop: 800011951 Mime-Version: 1.0 Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG . Hair Lines The Best Hair and Body Products Newsletter Volume 1, Issue 2 ****************************************************************************** As the year draws to an end, we would like to thank each of you for your continued support and the privilege to serve you. May you be blessed with peace, good health, and prosperity in 2002!!!! Wishing you the best of this Winter season, Because you're so special, is the reason. Hope your days are full of fun, From the beginning until they are done. Wishing you an abundance of love, And all good gifts from above. Happy Holidays from the Staff and Management of The Best Hair and Body Products!!!! *************************************************************************** THIS IS MY OWN SPECIAL SECRET Recipe for Holiday "Cheer" *************************************************************************** I must confess I am shameless when it comes to Rum Balls. I can never eat just five or ten. I also love bitter chocolate so I roll my Rum Balls (or the ones I do not eat while making) in cocoa and ground chocolate depending on your taste. I actually mix the whole batch (single) in a food processor. I start with the vanilla wafers and then add the rest of the ingredients. Rum balls will taste best if aged for a week or two in an airtight tin. These little hummers make great gifts and travel well. Just be sure to wrap them tightly so they don't dry out (heaven forbid any vapors escape!) Rum Balls (I do not know where this recipe came from) Preparation Time: about 30 minutes Cooking Time: ZERO Minutes Serves: unknown Cal: unknown and after about 10 who cares ;) Amount Ingredients -------- ----------------------------- 3 T Cocoa 1 C (150g) Confectioners' Sugar 3 C (~330g) Vanilla Wafers, crushed 4 T Dark Corn Syrup 1/2 C (125ml) Dark Rum (more or less, depending on personal tastes) extra Cocoa and/or Ground Chocolate to roll the rum balls in Into a large bowl, sift together the cocoa and confectioners' sugar In a food processor or blender crush/crumble the vanilla wafers. Add the crushed vanilla wafers to the sugar mixture and combine. Add the remaining ingredients. Form the mixture into 1 inch (2.5 cm) balls with your hands. The balls should hold together easily and retain their shape. If the mixture is too dry to hold together or too wet to form balls, you can easily adjust the consistency by adding rum or sugar accordingly. Sprinkle the extra cocoa or ground chocolate on a flat surface and roll the balls in to coat. *************************************************************************** SPECIAL OF THE WEEK *************************************************************************** Can't get to the Spa? Then get to the Jar! ********************THE BEST CALMING FORMULA BATH CRYSTALS****************** 100% NATURAL AROMATHERAPY FORMULA As the yule tide rings in it brings with it certain anxieties and bothers that take us out of our normal routine. From unwanted guests to making sure everyone got that "right gift". While at times many of us wish we could "get away" for the holidays most of us can't due to family expectations and obligations. We've discovered the next best thing, in the privacy of your own home, in the sanctity of your bath, and at a fraction of the cost. The Best Calming Formula Bath Crystals. 100% natural aromatherapy formula blended with The Essential Oils of Lavender, Lemon, & Rosemary, in combination they help stimulate the body's immune system, normalize emotions & mood swings, help insomnia & depression, fatigue, memory loss, muscle pain & headaches, promote mental clarity & alertness. Sea Salt extracts impurities & toxins from the skin put there by air pollution and improper diet, while adding minerals to the skin. Special skin softeners are added to give the skin that soft luxurious feel. DIRECTIONS: Apply 2 or 3 handfuls into warm bath just before entering. Use hand to swirl around in bathtub to distribute evenly and enter bath, relax, and enjoy. Regularly $7.95 NOW $5.00. See it at http://click.topica.com/maaae9AaaQPjXa2Rf8fb/ <<<<>>>><<<<>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<< Weekly FUNNY!!!! >>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>>><<<<>>> A young man visited his sister who was married to a farmer in a poor district of the country. Since there were limited accommodations, he was required to sleep with his young nephew. When the young man came into the bedroom, he saw the little boy kneeling at the side of the bed with his head bowed. Thinking this was the child's religious upbringing, he decided to present a good example and kneeled at the other side of the bed with his head bowed. The child looked up and said, "Whatcha doin'?" "Why, the same thing you're doing", replied the uncle. "Ma's gonna be mad", said the boy. "The pot's on this side". \|||/ (@@) ooO_(_ )_Ooo________________________________ _____|_____|_____|_____|_____|_____|_____|_____| ___|____|_____|_____|_____|_____|_____|_____|____ _____|_____ Keep Smiling - - T |___ ==================================================================== Update your profile or unsubscribe here: http://topica.email-publisher.com/survey/?a2iVOJ.a2Rf8f Delivered by Topica Email Publisher, http://topica.email-publisher.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20:19:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from molly.intercom.net (molly.intercom.net [216.240.106.84]) by hub.freebsd.org (Postfix) with ESMTP id 2282937B416 for ; Sun, 23 Dec 2001 20:19:46 -0800 (PST) Received: from cross (hh1117127.direcpc.com [206.71.117.127]) by molly.intercom.net (8.12.1/8.12.1) with SMTP id fBO4KFpk005002; Sun, 23 Dec 2001 23:20:18 -0500 (EST) Message-ID: <000901c18c31$e3e36020$0273150a@woodstock.lanalyse.com> From: "Ron Hensley" To: "parv" , "f-q" References: <20011223230639.A29277@moo.holy.cow> Subject: Re: how to recreate a mount point? Date: Sun, 23 Dec 2001 23:17:17 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 mkdir /cdrw mount /cdrw (It is just a directory) - ----- Original Message ----- From: "parv" To: "f-q" Sent: Sunday, December 23, 2001 11:06 PM Subject: how to recreate a mount point? > hi people, > > in sheer stupidity i deleted the /cdrw mount point thinking of it > just an empty directory... > > # fgrep '/cdrw' /etc/fstab > /dev/ad0s3e /cdrw ufs rw,noauto 2 2 > > # df -i /dev/ad0s3e > Filesystem 1K-blocks Used Avail Capacity iused ifree %iused Mounted on > /dev/ad0s3e 714447 1 657291 0% 3 179581 0% > > > ...how can i recreate it? nondestructively (to other file systems) > of course. i couldn't find (or missed) anything in manpages for > disklabel, fstab, fdisk, mount, newfs. i was hoping it to be in > manpages related to mount or fstab. where can i find this > information? > > thanks much. > > -- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBPCasTFFb04N5DzUjEQIjNACeNmGNyHk61a43kM6MAW0p7ZY9M4QAoPAp WNrFv2o8MOSWUa3Dv4j0CgA7 =SIO3 -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20:33: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from domain.com (44.mujb.dlls.dllstxbk.dsl.att.net [12.98.249.44]) by hub.freebsd.org (Postfix) with SMTP id B18A337B405 for ; Sun, 23 Dec 2001 20:33:03 -0800 (PST) Received: (qmail 20133 invoked by alias); 24 Dec 2001 04:33:48 -0000 Received: from unknown (HELO there) (127.0.0.1) by loopback with SMTP; 24 Dec 2001 04:33:48 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Jason Halbert Reply-To: jason@jason-n3xt.org To: questions@freebsd.org Subject: Re: CVSup Servers Date: Mon, 24 Dec 2001 04:33:48 +0000 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011224043303.B18A337B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just checked and cvsup3 is working for me again. I like cvsup3 because I always get a fast connection to it. Maybe I should traceroute a few servers to find out which I am closest to. *shrug* Happy Christmas Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20:39: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.microbsd.net (mail.microbsd.net [4.23.122.30]) by hub.freebsd.org (Postfix) with ESMTP id 3E83237B623 for ; Sun, 23 Dec 2001 20:38:52 -0800 (PST) Received: from 127.0.0.1 (localhost.microbsd.net [127.0.0.1]) by mail.microbsd.net (Postfix) with SMTP id 846711F08; Sun, 23 Dec 2001 23:35:52 -0500 (EST) Received: from there (unknown [4.23.122.55]) by mail.microbsd.net (Postfix) with SMTP id 183FC1F05; Sun, 23 Dec 2001 23:35:47 -0500 (EST) Content-Type: text/plain; charset="iso-8859-1" From: OutBack Dingo Reply-To: dingo@microbsd.net To: jason@jason-n3xt.org, questions@freebsd.org Subject: Re: CVSup Servers Date: Sun, 23 Dec 2001 23:38:09 -0500 X-Mailer: KMail [version 1.3.2] References: <20011224043303.B18A337B405@hub.freebsd.org> In-Reply-To: <20011224043303.B18A337B405@hub.freebsd.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011224043547.183FC1F05@mail.microbsd.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I always use cvsup 9 or 10, they are very fast On Sunday 23 December 2001 11:33 pm, Jason Halbert wrote: > I just checked and cvsup3 is working for me again. I like cvsup3 > because I always get a fast connection to it. Maybe I should > traceroute a few servers to find out which I am closest to. > > *shrug* > > Happy Christmas > > Jason > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 20:45: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from anansi.vpha.health.ufl.edu (anansi.vpha.health.ufl.edu [159.178.78.153]) by hub.freebsd.org (Postfix) with ESMTP id 006E537B416 for ; Sun, 23 Dec 2001 20:45:00 -0800 (PST) Received: (from dymphna@localhost) by anansi.vpha.health.ufl.edu (8.9.3/8.9.3) id XAA00345; Sun, 23 Dec 2001 23:44:54 -0500 Date: Sun, 23 Dec 2001 23:44:54 -0500 From: sridharv@ufl.edu Message-Id: <200112240444.XAA00345@anansi.vpha.health.ufl.edu> X-Authentication-Warning: anansi.vpha.health.ufl.edu: dymphna set sender to sridharv@ufl.edu using -f To: freebsd-questions@freebsd.org Reply-To: sridharv@ufl.edu MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP3 Imap webMail Program 2.0.10 X-Originating-IP: 66.157.145.76 Subject: prob installing 4.4 rel Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am trying to install 4.4 REL off a cd-rom which i burnt. I used winxp with its inbuilt burner to create the cds(don't hate me for that .. its my friend's PC and I don't have a writer). When I boot with the cd i am getting a message which indicates that there is no boot record found in the cd rom. has anyone encountered this b4? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 21:11:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 9328C37B416 for ; Sun, 23 Dec 2001 21:11:48 -0800 (PST) Received: from sdn-ar-003dcwashp153.dialsprint.net ([206.133.21.89] helo=moo.holy.cow) by snipe.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16INOo-0002ra-00; Sun, 23 Dec 2001 21:11:47 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id 004BF50D0E; Mon, 24 Dec 2001 00:12:08 -0500 (EST) Date: Mon, 24 Dec 2001 00:12:08 -0500 From: parv To: Ron Hensley Cc: f-q Subject: Re: how to recreate a mount point? Message-ID: <20011224001208.A26954@moo.holy.cow> Mail-Followup-To: Ron Hensley , f-q References: <20011223230639.A29277@moo.holy.cow> <000901c18c31$e3e36020$0273150a@woodstock.lanalyse.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000901c18c31$e3e36020$0273150a@woodstock.lanalyse.com>; from ronh@intercom.net on Sun, Dec 23, 2001 at 11:17:17PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message <000901c18c31$e3e36020$0273150a@woodstock.lanalyse.com>, wrote Ron Hensley thusly... > > mkdir /cdrw > mount /cdrw > (It is just a directory) > > - ----- Original Message ----- > From: "parv" > To: "f-q" > Sent: Sunday, December 23, 2001 11:06 PM > Subject: how to recreate a mount point? > > > > hi people, > > > > in sheer stupidity i deleted the /cdrw mount point thinking of it > > just an empty directory... ... i be damned. what do you know it is a plain old directory. thanks ron. - parv -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 21:27:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id E287737B405 for ; Sun, 23 Dec 2001 21:27:34 -0800 (PST) Received: (qmail 23353 invoked from network); 24 Dec 2001 05:27:28 -0000 Received: from dap-209-166-133-226.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.226) by smtp2.mx.pitdc1.stargate.net with SMTP; 24 Dec 2001 05:27:28 -0000 Received: (qmail 9800 invoked from network); 24 Dec 2001 05:27:49 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 24 Dec 2001 05:27:49 -0000 From: "Doug Reynolds" To: "daverk@epix.net" , "freebsd-questions@freebsd.org" Date: Mon, 24 Dec 2001 00:28:35 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <200112232254.fBNMsj7h026162@lima.epix.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: tarballs, etc. Message-Id: <20011224052734.E287737B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001 17:54:44 -0500, Dave Kaufman wrote: >ok, how do i uncompress a tarball? when i use tar -x.... i get a message >about not being able to initialize the device sa0. i presume it's looking for >a tape drive. per the help, if i try to filter through bzip2 or unbzip2 or >ungzip i get the same thing. i'm sure this is very simple but i'm not finding >it. > >have two files i want to undo. one is .tar.bz2 the other is a .tar.gz. > >all help is much appreciated. > >and happy holidays to all who are celebrating at this time of year. >Dave man tar tar -x -f filename tar tries to use the tape device if you dont use -f --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 22:33:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id EBB2A37B419 for ; Sun, 23 Dec 2001 22:33:42 -0800 (PST) Received: from dialup-63.214.217.212.dial1.philadelphia1.level3.net ([63.214.217.212] helo=) by snipe.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16IOg9-0002u5-00 for freebsd-questions@FreeBSD.org; Sun, 23 Dec 2001 22:33:42 -0800 Date: Mon, 24 Dec 2001 01:33:46 -0500 From: Jud To: freebsd-questions@FreeBSD.org Subject: FQDN, Apache2, and Postfix Message-Id: <20011224013346.264ddc0e.jud@operamail.com> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I installed the Apache 2 port a couple of weeks ago. When I try to run it (apachectl start), I get the following message: httpd: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName /usr/local/sbin/apachectl start: httpd could not be started I also recall a problem regarding lack of a fully qualified domain name when I installed and tried to configure postfix. I'm on a dialup connection with a dynamically assigned IP address. I'd appreciate advice and suggestions, either in the form of "Here's what to do," or "Here's where to find out what to do." Thanks, Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 22:39:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from antares.surnet.ru (antares.surnet.ru [195.54.2.5]) by hub.freebsd.org (Postfix) with ESMTP id 5827C37B405; Sun, 23 Dec 2001 22:39:48 -0800 (PST) Received: (from uucp@localhost) by antares.surnet.ru (8.11.6/Joy) with UUCP id fBO6dWP80627; Mon, 24 Dec 2001 11:39:32 +0500 (YEKT) X-Authentication-Warning: antares.surnet.ru: uucp set sender to ilia@chel.skbkontur.ru using -f Received: from localhost (localhost [127.0.0.1]) by sol.chel.skbkontur.ru (8.11.6/8.11.6) with ESMTP id fBO5qBR55185 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Mon, 24 Dec 2001 10:52:24 +0500 (YEKT) (envelope-from ilia@chel.skbkontur.ru) Date: Mon, 24 Dec 2001 10:52:10 +0500 (YEKT) From: =?koi8-r?B?6czY0SD7ydDJw8nO?= To: Jonathan Chen Cc: ports@FreeBSD.ORG, Subject: Re: numerous IMAP questions... In-Reply-To: <20011224161257.A57370@grimoire.chen.org.nz> Message-ID: <20011224105100.N54706-100000@sol.chel.skbkontur.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Salut, Jonathan Chen ! On Mon, 24 Dec 2001, Jonathan Chen wrote: > The "mbox driver" allows imap-uw to recognise UNIX mailboxes which > live in /var/mail. The "moved ... from mbox" is some weird imap-uw > `feature' that will move mail from /var/mail to ~/mbox *if* it sees a > ~/mbox. If you don't want this, all you have to do is to move all the > mail from ~/mbox to /var/mail/user. ie: > > 1. make sure imapd is stopped > 2. make sure /var/mail/user is 0 bytes > 3. mv ~/mbox /var/mail/user I saw those messages when there was no file ~user/mbox. that file appears and disappears at nobody's will :) > > At which point when imap-uw starts up again, it will use > /var/mail/user as the INBOX and won't attempt to move mail out of it. > -- > Jonathan Chen > ---------------------------------------------------------------------- > Don't worry about avoiding temptation, > as you grow older, it starts avoiding you. > Regards, (=EE=C1=C9=CC=D5=DE=DB=C9=C5 =D0=CF=D6=C5=CC=C1=CE=C9=D1) Ilia Chipitsine (=E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 22:45:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp3out.rdc-nyc.rr.com (nycsmtp3out.rdc-nyc.rr.com [24.29.99.227]) by hub.freebsd.org (Postfix) with ESMTP id A508637B416 for ; Sun, 23 Dec 2001 22:45:23 -0800 (PST) Received: from scott1.nyc.rr.com (24-168-25-8.nyc.rr.com [24.168.25.8]) by nycsmtp3out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id fBO6k3rx006310; Mon, 24 Dec 2001 01:46:07 -0500 Message-Id: <5.1.0.14.0.20011224013852.00c57bb8@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 24 Dec 2001 01:45:09 -0500 To: Jud , freebsd-questions@FreeBSD.ORG From: Scott Subject: Re: FQDN, Apache2, and Postfix In-Reply-To: <20011224013346.264ddc0e.jud@operamail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 01:33 2001/12/24 -0500, Jud wrote: >I installed the Apache 2 port a couple of weeks ago. When I try >to run it (apachectl start), I get the following message: > >httpd: Could not determine the server's fully qualified domain >name, using 127.0.0.1 for ServerName >/usr/local/sbin/apachectl start: httpd could not be started IIRC (trouble is, I was playing with Apache on a few flavors of Linux as well as BSD, and I forget which problem I had where), I just had to add the machine name to /etc/hosts---for instance if you went for the default of localhost.localdomain and you're on a private network of 192.168.1.x and your machine's IP is 192.168.1.100 then add under that line of 127.0.0.1 localhost 192.168.1.100 localhost.localdomain I'm pretty sure that's how I fixed it. (Don't know about postfix though--on Linux it worked out of the box and on BSD, I've been using point and wimp clients. Did you create a user named postfix when you installed it? You do have to do that--aside from that, as I said, I think it worked right out of the box) HTH Scott Robbins To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 23:39:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id BCF6137B416 for ; Sun, 23 Dec 2001 23:39:33 -0800 (PST) Received: from dialup-63.214.217.212.dial1.philadelphia1.level3.net ([63.214.217.212] helo=) by falcon.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16IPhr-0006lX-00; Sun, 23 Dec 2001 23:39:32 -0800 Date: Mon, 24 Dec 2001 02:39:35 -0500 From: Jud To: Scott Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FQDN, Apache2, and Postfix Message-Id: <20011224023935.1bcc795b.jud@operamail.com> In-Reply-To: <5.1.0.14.0.20011224013852.00c57bb8@pop-server.nyc.rr.com> References: <20011224013346.264ddc0e.jud@operamail.com> <5.1.0.14.0.20011224013852.00c57bb8@pop-server.nyc.rr.com> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 01:45:09 -0500 Scott wrote: > At 01:33 2001/12/24 -0500, Jud wrote: > >I installed the Apache 2 port a couple of weeks ago. When I try > >to run it (apachectl start), I get the following message: > > > >httpd: Could not determine the server's fully qualified domain > >name, using 127.0.0.1 for ServerName > >/usr/local/sbin/apachectl start: httpd could not be started > > IIRC (trouble is, I was playing with Apache on a few flavors of Linux as > well as BSD, and I forget which problem I had where), I just had to add the > machine name to /etc/hosts---for instance if you went for the default of > localhost.localdomain and you're on a private network of 192.168.1.x and > your machine's IP is 192.168.1.100 > then add under that line of 127.0.0.1 localhost > 192.168.1.100 localhost.localdomain > > I'm pretty sure that's how I fixed it. Thanks for your response, but since I connect via dialup and my IP address is dynamically assigned by my ISP, I wouldn't think your solution is possible for me. Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 23:44:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta3n.bluewin.ch (mta3n.bluewin.ch [195.186.1.212]) by hub.freebsd.org (Postfix) with ESMTP id 9629337B419 for ; Sun, 23 Dec 2001 23:44:21 -0800 (PST) Received: from saturn.spectraweb.ch (195.186.190.213) by mta3n.bluewin.ch (Bluewin AG 6.0.039) id 3C234FE80002659D for freebsd-questions@freebsd.org; Mon, 24 Dec 2001 08:43:44 +0100 Received: (from martin@localhost) by saturn.spectraweb.ch (8.11.6/8.11.6) id fBO8ps300345 for freebsd-questions@freebsd.org; Mon, 24 Dec 2001 09:51:54 +0100 (CET) (envelope-from pcservi@spectraweb.ch) Date: Mon, 24 Dec 2001 09:51:43 +0100 From: Martin Schweizer To: freebsd-questions@freebsd.org Subject: Re: ipfw & ftp Message-ID: <20011224095143.B318@spectraweb.ch> Reply-To: Martin Schweizer Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Darryl I attached you my rc.firewall. I found a solution with passive and active ftp. On Fri, Dec 21, 2001 at 02:05:10PM -0600 Darryl Hoar wrote: > Greetings, > I have setup a firewall/router. My LAN has mostly > win9x, winNt & win2000 clients on it. Since I installed > the firewall, users have been unable to download files > from the internet that are on the vendors ftp site. The > firewall logs show nothing, but I'm assuming its related > to the firewall. > > How do I get around this problem safely? -- Regards Martin Schweizer PC-Service M. Schweizer; Gewerbehaus Schwarz; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch # ipfw add allow all from 192.168.1.1/24 to any keep-state #Freigabe für das interne Netzwerk # ipfw flush # ipfw add allow all from any to any # keep-state = ermöglicht während einer bestimmten Zeit, die Kommunikation # zwischen Client und Server. Nach dieser Zeit (TTL), wird der # Port wieder geschlossen # DNS (läuft nur über UDP) ipfw add allow udp from me to any 53 keep-state ipfw add allow udp from 192.168.1.1/24 to any 53 keep-state # DHCP ipfw add allow udp from 192.168.1.1/24 68 to 192.168.1.1/24 67 keep-state ipfw add allow udp from me 67 to 192.168.1.1/24 68 keep-state ipfw add allow udp from me 67 to 192.168.1.1/24 67 keep-state ipfw add allow udp from 192.168.1.1/24 67 to me 67 keep-state # SMTP ipfw add allow tcp from me to any 25 keep-state ipfw add allow udp from me to any 25 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 25 keep-state ipfw add allow udp from 192.168.1.1/24 to any 25 keep-state # POP3 ipfw add allow tcp from me to any 110 keep-state ipfw add allow udp from me to any 110 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 110 keep-state ipfw add allow udp from 192.168.1.1/24 to any 110 keep-state # HTTP ipfw add allow tcp from me to any 80 keep-state ipfw add allow udp from me to any 80 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 80 keep-state ipfw add allow udp from 192.168.1.1/24 to any 80 keep-state # FTP ipfw add allow tcp from any to any 20 keep-state ipfw add allow tcp from any to any 21 keep-state ipfw add allow tcp from any 20 to me 1024-49151 keep-state # aktives FTP ipfw add allow tcp from any 20 to 192.168.1.1/24 1024-49151 keep-state # ipfw add allow tcp from me 1024-49151 to any keep-state # passives FTP 1. # ipfw add allow tcp from any 10224-49151 to me keep-state # passives FTP 2. # SSH ipfw add allow tcp from me to any 22 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 22 keep-state # Telnet ipfw add allow tcp from me to any 23 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 23 keep-state ipfw add allow tcp from 192.168.1.1/24 to me keep-state # Ping / TraceRoute ipfw add allow icmp from me to any ipfw add allow icmp from any to me ipfw add allow icmp from 192.168.1.1/24 to any ipfw add allow icmp from any to 192.168.1.1/24 # NetBIOS (Samba) ipfw add allow 137 from me to 192.168.1.1/24 keep-state ipfw add allow 137 from 192.168.1.1/24 to me keep-state ipfw add allow 139 from me to 192.168.1.1/24 keep-state ipfw add allow 139 from 192.168.1.1/24 ro me keep-state # Whois ipfw add allow tcp from me to any 63 keep-state ipfw add allow udp from me to any 63 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 63 keep-state ipfw add allow udp from 192.168.1.1/24 to any 63 keep-state # Gopher ipfw add allow tcp from me to any 70 keep-state ipfw add allow udp from me to any 70 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 70 keep-state ipfw add allow udp from 192.168.1.1/24 to any 70 keep-state # Finger ipfw add allow tcp from me to any 79 keep-state ipfw add allow udp from me to any 79 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 79 keep-state ipfw add allow udp from 192.168.1.1/24 to any 79 keep-state # NNTP ipfw add allow tcp from me to any 119 keep-state ipfw add allow udp from me to any 119 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 119 keep-state ipfw add allow udp from 192.168.1.1/24 to any 119 keep-state # NTP ipfw add allow tcp from me to any 123 keep-state ipfw add allow udp from me to any 123 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 123 keep-state ipfw add allow udp from 192.168.1.1/24 to any 123 keep-state # CVSUP ipfw add allow tcp from me to any 5999 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 5999 keep-state # Mailverwaltung Swiss-Web ipfw add allow tcp from me to any 88 keep-state ipfw add allow tcp from 192.168.1.1/24 to any 88 keep-state To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Dec 23 23:49:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.fc.kiev.ua (indust.fc.kiev.ua [212.26.129.65]) by hub.freebsd.org (Postfix) with ESMTP id B9C4D37B416 for ; Sun, 23 Dec 2001 23:49:24 -0800 (PST) Received: by mail.fc.kiev.ua (Postfix, from userid 1015) id 552443C9; Mon, 24 Dec 2001 09:49:17 +0200 (EET) Received: from gnut.fc.kiev.ua (blend [192.168.5.17]) by mail.fc.kiev.ua (Postfix) with ESMTP id 39C823C7 for ; Mon, 24 Dec 2001 09:49:16 +0200 (EET) Date: Mon, 24 Dec 2001 09:49:45 +0300 From: Oles' Hnatkevych X-Mailer: The Bat! (v1.53bis) Reply-To: Oles' Hnatkevych Organization: Finance & Credit Banking Corporation X-Priority: 3 (Normal) Message-ID: <02901731.20011224094945@fc.kiev.ua> Disposition-Notification-To: gnut@fc.kiev.ua To: freebsd-questions@freebsd.org Subject: arp, firewall, etc MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello freebsd-questions, how do I prevent users from setting IP address manually so they can not use another one's IP address. my first thought was to set permanent entries in ARP table is there any other way to cope with that? With best wishes, Oles' Hnatkevych, http://gnut.kiev.ua, gnut@fc.kiev.ua To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 0:30: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from andrsn.stanford.edu (andrsn.Stanford.EDU [171.66.112.163]) by hub.freebsd.org (Postfix) with ESMTP id 107FB37B41A for ; Mon, 24 Dec 2001 00:30:04 -0800 (PST) Received: from localhost (andrsn@localhost.stanford.edu [127.0.0.1]) by andrsn.stanford.edu (8.9.3/8.9.1) with ESMTP id AAA54208; Mon, 24 Dec 2001 00:22:07 -0800 (PST) Date: Mon, 24 Dec 2001 00:22:07 -0800 (PST) From: Annelise Anderson To: sridharv@ufl.edu Cc: freebsd-questions@FreeBSD.ORG Subject: Re: prob installing 4.4 rel In-Reply-To: <200112240444.XAA00345@anansi.vpha.health.ufl.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001 sridharv@ufl.edu wrote: > I am trying to install 4.4 REL off a cd-rom which i > burnt. I used winxp with its inbuilt burner to create > the cds(don't hate me for that .. its my friend's PC > and I don't have a writer). When I boot with the cd i > am getting a message which indicates that there is no > boot record found in the cd rom. > has anyone encountered this b4? > When you look at the CD in Windows, does it have a bunch of files and directories? If not, you may have just copied the iso when you burned it insteading of creating a CD from an iso. Annelise -- Annelise Anderson Author of: FreeBSD: An Open-Source Operating System for Your PC Available from: BSDmall.com and amazon.com Book Website: http://www.bittreepress.com/FreeBSD/introbook/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 0:30:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from andrsn.stanford.edu (andrsn.Stanford.EDU [171.66.112.163]) by hub.freebsd.org (Postfix) with ESMTP id 2D38E37B41D for ; Mon, 24 Dec 2001 00:30:06 -0800 (PST) Received: from localhost (andrsn@localhost.stanford.edu [127.0.0.1]) by andrsn.stanford.edu (8.9.3/8.9.1) with ESMTP id AAA54221; Mon, 24 Dec 2001 00:29:38 -0800 (PST) Date: Mon, 24 Dec 2001 00:29:38 -0800 (PST) From: Annelise Anderson To: Ron Hensley Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Emergency Boot Disk In-Reply-To: <001401c18c16$d692ab30$0273150a@woodstock.lanalyse.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 23 Dec 2001, Ron Hensley wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > How do I make an emergency boot disk, that will load the current > kernel/drive? > I know I can use the rescue image and the 2nd CD to do a resuce repair, but > that will load the file system off the CD/Floppy, not the one off my current > hard drive. > > Is there a way to make a boot disk, like rathern then using the MBR to load > up? > -----BEGIN PGP SIGNATURE----- > Version: PGPfreeware 6.5.8 for non-commercial use > > iQA/AwUBPCZ+61Fb04N5DzUjEQJRFgCgoe+B1Sj6njoiFc1Qj7G3sgjHV8MAnjAu > Q1QEsanVpeZNO89PKX675VOQ > =P8Kb > -----END PGP SIGNATURE----- > I use a fixit.flp, created just as you create kern.flp and msfroot.flp. It is not itself bootable, but at the boot prompt you can type (instead of the default, which won't work with just a fixit.flp) 0:ad(1,a)/boot/loader The first number is the hard drive number; the second is the slice. You can experiment to find what works, then mount the floppy and put a file in its root directory called kernel.conf with the text: boot: 0:ad(1,a)/boot/loader The fixit.flp will no longer work (unless you delete this file) as a typical fixit.flp, which is usually used after you boot kern.flp and mfsroot.flp to repair a damaged system. Annelise -- Annelise Anderson Author of: FreeBSD: An Open-Source Operating System for Your PC Available from: BSDmall.com and amazon.com Book Website: http://www.bittreepress.com/FreeBSD/introbook/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 1:36:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id BDDC837B416 for ; Mon, 24 Dec 2001 01:36:14 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id 19E8F7F31; Mon, 24 Dec 2001 10:36:08 +0100 (MET) To: freebsd-questions@freebsd.org Subject: Warning banners (MOTD) Message-ID: <1009186568.3c26f7080d865@mail.broadpark.no> Date: Mon, 24 Dec 2001 10:36:08 +0100 (MET) From: johann@broadpark.no MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Good morning, Would anyone happen to know where I can get a hold of some well-written MOTD samples? The search query 'warning banners' on Google gives me a few hits, though I'd like to have more choices to consider from. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 2:35:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lima.epix.net (lima.epix.net [199.224.64.56]) by hub.freebsd.org (Postfix) with ESMTP id 300E537B417 for ; Mon, 24 Dec 2001 02:35:20 -0800 (PST) Received: from there (clsm-58ppp192.epix.net [209.74.58.192]) by lima.epix.net (8.12.1/2001112001/PL) with SMTP id fBOAZI7h013406 for ; Mon, 24 Dec 2001 05:35:19 -0500 (EST) Message-Id: <200112241035.fBOAZI7h013406@lima.epix.net> Content-Type: text/plain; charset="iso-8859-1" From: Dave Kaufman Reply-To: daverk@epix.net To: freebsd-questions@freebsd.org Subject: switching to sylpheed Date: Mon, 24 Dec 2001 05:35:16 -0500 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG have checked the sylpheed FAQ at their site and not sure where else to ask. hopefully some user can help. have been using kmail under kde. want to try sylpheed under fluxbox. when i start sylpheed i get a message. "First, you have to set the location of mailbox you can use the existing mailbox in MH format if you have one. If you're not sure, just select OK." not being sure i hit OK and get. "Error Creation of the mailbox failed. Maybe some files exist, or you don't have the permission to write there." i'm logged in as root (i know, bad form but i'm trying to keep things simple for now). when i try to create a new box it doesn't give me an error but nothing appears in that pane either. thanks for all help Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 2:42:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tharmas.rintrah.org (dhcp065-031-016-002.insight.rr.com [65.31.16.2]) by hub.freebsd.org (Postfix) with SMTP id DCC2237B41C for ; Mon, 24 Dec 2001 02:42:09 -0800 (PST) Received: (qmail 31807 invoked by uid 1000); 24 Dec 2001 10:42:08 -0000 Date: Mon, 24 Dec 2001 05:42:08 -0500 From: devin-freebsdquestions@rintrah.org To: Jim Durham Cc: freebsd-questions@freebsd.org Subject: Re: BSD emergency shutdown of all servers Message-ID: <20011224054207.A31669@tharmas.rintrah.org> Mail-Followup-To: Jim Durham , freebsd-questions@freebsd.org References: <4.2.0.58.20011223163417.0097c610@pop.netzero.net> <200112240315.fBO3FLA08834@w2xo.pgh.pa.us> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200112240315.fBO3FLA08834@w2xo.pgh.pa.us>; from durham@w2xo.pgh.pa.us on Sun, Dec 23, 2001 at 10:14:42PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 23, 2001 at 10:14:42PM -0500, Jim Durham wrote: > On Sunday 23 December 2001 04:44 pm, Lord Raiden wrote: > > How would you go about doing an emergency shutdown of all of your > > BSD servers say if something were happening that all of your > > servers HAD to be shut down in 2 minutes or less regardless. > > SSH'ing to all the boxes at the same time would be kinda impossible > > in that limited time. I'm more looking at the old "Panic Button" > > idea. > > > > The idea came to me today and I thought it would be very useful. > > I don't see a need for it right in the foreseeable future, but then > > again, I didn't see the need for a UPS either until one of my boxes > > got whacked by a power surge. So as a little preventative > > forethought, I want something that can remotely shut down all of > > our BSD servers within a 2 minute window so that we can go power > > off at exactly 2 minutes and put the whole NOC dark within 120 > > seconds of the "Panic Alert" so to speak. Plus being able to > > execute all of this from a basic script would be great too. Kinda > > a single option to execute thing. The less things I have to do in > > that 2 minute panic window, the better. > > > > One use I can see for this is if severe weather was approaching > > and we suddenly got an evacuation warning (say a tornado was coming > > or something) then that 2 minute panic shutdown would be priceless. > > Now if the NOC got annihilated by a tornado that would be kinda a > > pointless exercise, but under other circumstances I can see where > > that would be a good thing. > > > > I'm also wanting this to be able to be done through an account > > other than ROOT. One that I can assign the option to only be able > > to execute 3 basic panic commands. One of them being the "shutdown > > -h now" command. The other two might be things like if we were > > being hacked I could fire that off to the server(s) in question and > > shut down all access to them till we could get rid of the hacker, > > or track him down and report him. > > > > Again, I know this is a lengthy question, but I wanted to be as > > clear as I could. Thanks in advance. I hope this gives you > > something to think about too. I'm also working on a solution for > > the NT/2k portion of our network. :) > > OK...this is where the versatility of FreeBSD will pay off for you. > > Create a user "shutdown" on all machines. Pick one machine as a > "master". Generate ssh keys for "shutdown" on all machines. Put the > identity.pub of the shutdown user on the master machine in the > authorized-keys file on each of the "slave" machines. Install "sudo" > on all machines. Allow user "shutdown" to have sudo privs to run > "shutdown -p" . > > Now, just write a little shell script on the master..,which runs as > user shutdown. .. > > #!/bin/sh > ssh slave1 "sudo shutdown -p" > ssh slave2 "sudo shutdown -p" > ... and so forth. > > I haven't tried this, but it should work very quickly, as no > passwords will be asked if you install the keys and they all should > come down within secs of each other (or millisecs, probably). > > You could get more elaborate and have a daemon running on each > machine that listens on a port and runs "shutdown -p" on receipt of > some special packet, but it's probably overkill > > Well, there are two ideas... I'm sure you'll get better ones.. > > -Jim Durham > > > > -Jim Durham > Or put all the slave machines into a list #!/bin/sh for x in `cat list.txt` do ssh $x "sudo shutdown -p" done --devin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 2:55:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ool-18bacefa.dyn.optonline.net (ool-18bacefa.dyn.optonline.net [24.186.206.250]) by hub.freebsd.org (Postfix) with ESMTP id 3F27E37B417 for ; Mon, 24 Dec 2001 02:55:47 -0800 (PST) Received: from ool-18bacefa.dyn.optonline.net (localhost [127.0.0.1]) by ool-18bacefa.dyn.optonline.net (8.11.6/8.11.6) with ESMTP id fBOAuYs00724 for ; Mon, 24 Dec 2001 05:56:34 -0500 (EST) (envelope-from c.rued@xsb.com) Date: Mon, 24 Dec 2001 05:56:34 -0500 From: Christopher Rued To: freebsd-questions@freebsd.org Subject: 4-Stable hangs after probing OPTi 931 sound card Message-ID: <20011224055634.A702@ool-18bacefa> References: <20011224054434.A477@ool-18bacefa> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <20011224054434.A477@ool-18bacefa>; from c.rued@xsb.com on Mon, Dec 24, 2001 at 05:44:34 -0500 X-Mailer: Balsa 1.3.0 Lines: 29 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just installed 4.4 release, and then upgraded to 4-stable earlier this week. Today, I noticed that my sound card is supported. It is a OPTi 931 ISA (PnP) sound card. Following the instructions on the the handbook page: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-device.html which specifically mention this card, I added the following line to my kernel config: device pcm I did this and recompiled my kernel. After I recompile, it goes through some of the normal boot-up stuff until it probes the sound card. I see that it has probed the card, and has identified it as an OPTi931, which seems correct. I left it alone for about 20 minutes, and still it went no farther than printing this message out. I was able to boot my machine using the same kernel after removing the sound card. Any ideas? - Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 3:13:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.cableone.net (mail4.cableone.net [24.116.0.62]) by hub.freebsd.org (Postfix) with ESMTP id 79F0237B405 for ; Mon, 24 Dec 2001 03:13:34 -0800 (PST) Received: from cis7.cableone.net ([24.116.0.41]) by mail4.cableone.net with Microsoft SMTPSVC(5.5.1877.447.44); Mon, 24 Dec 2001 04:12:27 -0700 Received: from mail pickup service by cis7.cableone.net with Microsoft SMTPSVC; Mon, 24 Dec 2001 04:13:33 -0700 From: To: Subject: shared object "libc.so.6" not found Date: Mon, 24 Dec 2001 04:13:33 -0700 Message-ID: <160c901c18c6c$06464670$2900740a@cableone.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft CDO for Windows 2000 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Content-Class: urn:content-classes:message Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG had installed netscape, the bsd version, since the linux version never worked due to not being able to find the lib files it needed. Same story with the bsd version. Tried copying libXt.so.6 & libXtst.so.6.1 to several lib directories and then creating the soft links, but it still would not work. After rebooting & attempting to startx, got the following message: /usr/libexec/ld-elf.so.1: Shared object "libc.so.6" not found. Can someone tell me how to fix this? I hate to do a complete reinstall. Everything else is working fine. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 3:35:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta7.pltn13.pbi.net (mta7.pltn13.pbi.net [64.164.98.8]) by hub.freebsd.org (Postfix) with ESMTP id 6CB8137B41B for ; Mon, 24 Dec 2001 03:35:09 -0800 (PST) Received: from blackbox.pacbell.net ([64.166.85.255]) by mta7.pltn13.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GOU00CH2IUK3Q@mta7.pltn13.pbi.net> for freebsd-questions@FreeBSD.ORG; Mon, 24 Dec 2001 03:35:08 -0800 (PST) Received: (from mikem@localhost) by blackbox.pacbell.net (8.11.6/8.11.6) id fBOBfeP36071; Mon, 24 Dec 2001 03:41:40 -0800 (PST envelope-from mikem) Date: Mon, 24 Dec 2001 03:41:40 -0800 From: mikem Subject: Re: switching to sylpheed In-reply-to: <200112241035.fBOAZI7h013406@lima.epix.net> To: freebsd-questions@FreeBSD.ORG Message-id: <200112241141.fBOBfeP36071@blackbox.pacbell.net> MIME-version: 1.0 X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd5.0) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT References: <200112241035.fBOAZI7h013406@lima.epix.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 05:35:16 -0500 Dave Kaufman wrote: > > not being sure i hit OK and get. > "Error > Creation of the mailbox failed. > Maybe some files exist, or you don't have the > permission to write there." > The default directory it tries to create is Mail. Do you already have such a sub-directory in your home directory? > i'm logged in as root (i know, bad form but i'm trying to keep things simple > for now). Have you tried the sudo port. It's very useful. cheers, mikem To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 4:24:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp3out.rdc-nyc.rr.com (nycsmtp3out.rdc-nyc.rr.com [24.29.99.227]) by hub.freebsd.org (Postfix) with ESMTP id 258AF37B417 for ; Mon, 24 Dec 2001 04:24:09 -0800 (PST) Received: from scott1.nyc.rr.com (24-168-25-8.nyc.rr.com [24.168.25.8]) by nycsmtp3out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id fBOCOurx016444; Mon, 24 Dec 2001 07:24:57 -0500 Message-Id: <5.1.0.14.0.20011224072041.00c3acf0@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 24 Dec 2001 07:24:05 -0500 To: daverk@epix.net, freebsd-questions@FreeBSD.ORG From: Scott Subject: Re: switching to sylpheed In-Reply-To: <200112241035.fBOAZI7h013406@lima.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 05:35 2001/12/24 -0500, Dave Kaufman wrote: >have been using kmail under kde. want to try sylpheed under fluxbox. when i >start sylpheed i get a message. >"First, you have to set the location of mailbox >you can use the existing mailbox in MH format >if you have one. >If you're not sure, just select OK." Instead of hitting OK, give it another name. I believe that Kmail also uses Mail as the default, therefore, you're running into a conflict in that directory. I usually add an 11 so it's called Mail11. This way, if I try another emailer that doesn't give me the choice of naming the mailbox, I have no problem later. (None of them use Mail11 as the default.) :) HTH Scott Robbins To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 4:27:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.bg (ns.mail.bg [212.91.166.100]) by hub.freebsd.org (Postfix) with SMTP id 7CCCC37B41A for ; Mon, 24 Dec 2001 04:27:15 -0800 (PST) Received: (qmail 14306 invoked by uid 102); 19 Dec 2001 09:51:21 -0000 To: freebsd-questions@freebsd.org Subject: pppd Message-ID: <1008755481.3c20631932589@mail.bg> Date: Wed, 19 Dec 2001 11:51:21 +0200 (EET) From: nik_n@mail.bg References: <558A166DE464D511977C00304821AB160102465B@mainexch.firewall> In-Reply-To: <558A166DE464D511977C00304821AB160102465B@mainexch.firewall> MIME-Version: 1.0 Content-Type: text/plain; charset=windows-1251 Content-Transfer-Encoding: 8bit User-Agent: mail.bG web interface 2.22 X-Originating-IP: 195.34.109.194 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Could ask you anything?Where I can find patch for pppd (FreeBSD) support radius, radius acct and come back on the Radius server Nas-Port-Type = Async Thanks __________________________________ 100 õèëÿäè äóøè íå ìîãàò äà ãðåøàò Íàïðàâåòå ñè è Âèå àäðåñ â mail.bG 12MB-POP3-WAP-SMS---TOBA-E-mail.bG èçïðàòåíî îò http://mail.bg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 5: 8:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shared1-mail.whowhere.com (shared1-batch.whowhere.com [209.185.123.82]) by hub.freebsd.org (Postfix) with SMTP id E98D237B417 for ; Mon, 24 Dec 2001 05:08:11 -0800 (PST) Received: from Unknown/Local ([?.?.?.?]) by shared1-mail.whowhere.com; Mon Dec 24 05:08:01 2001 To: freebsd-questions@FreeBSD.ORG Date: Mon, 24 Dec 2001 05:08:01 -0800 From: "neil alcoseba" Message-ID: Mime-Version: 1.0 X-Sent-Mail: on Reply-To: a_neil@eudoramail.com X-Mailer: MailCity Service Subject: FreeBsd inquire X-Sender-Ip: 216.252.208.10 Organization: QUALCOMM Eudora Web-Mail (http://www.eudoramail.com:80) Content-Type: text/plain; charset=us-ascii Content-Language: en Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Greetings! Where can I free download the freebsd installer and what are the necessary files to download in order to boot up on a floppy disk. Thank you and the information is highly appreciated. Sincerely yours, Neil Alcoseba Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 5:40:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from infinitive.futureperfectcorporation.com (infinitive.futureperfectcorporation.com [196.25.137.68]) by hub.freebsd.org (Postfix) with SMTP id CE67537B416 for ; Mon, 24 Dec 2001 05:40:43 -0800 (PST) Received: (qmail 12223 invoked by uid 0); 24 Dec 2001 13:40:41 -0000 Received: from gerund.futureperfectcorporation.com (196.25.137.65) by infinitive.futureperfectcorporation.com with SMTP; 24 Dec 2001 13:40:41 -0000 Received: (qmail 71013 invoked by uid 1001); 24 Dec 2001 13:40:54 -0000 Date: Mon, 24 Dec 2001 15:40:54 +0200 From: Neil Blakey-Milner To: Jonathan Chen Cc: Il%j Sipicin , ports@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: numerous IMAP questions... Message-ID: <20011224154053.A70749@mithrandr.moria.org> References: <20011223144012.T713-100000@sol.chel.skbkontur.ru> <20011224161257.A57370@grimoire.chen.org.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011224161257.A57370@grimoire.chen.org.nz>; from jonc@chen.org.nz on Mon, Dec 24, 2001 at 04:12:57PM +1300 Organization: iTouch Labs X-Operating-System: FreeBSD 4.3-RELEASE i386 X-URL: http://mithrandr.moria.org/nbm/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon 2001-12-24 (16:12), Jonathan Chen wrote: > On Sun, Dec 23, 2001 at 02:43:52PM +0500, Il%j Sipicin wrote: > > Well, > > > > 1) is there an alternative for imap-uw ? > > There's Courier IMAP, but the folders it creates are MH mailboxes (ie > files & directories) instead of UNIX-mailfolders (ie one file containing > several emails). No, they're Maildirs. And there're plenty good reasons why they're better than mailboxes. (and a few good reasons why they're worse too) Neil -- Neil Blakey-Milner nbm@mithrandr.moria.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 5:47:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id C479037B419 for ; Mon, 24 Dec 2001 05:47:40 -0800 (PST) Received: from trittico.fiddi.com ([12.228.145.237]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20011224134740.BDIO19716.rwcrmhc51.attbi.com@trittico.fiddi.com> for ; Mon, 24 Dec 2001 13:47:40 +0000 Date: Mon, 24 Dec 2001 05:47:40 -0800 (PST) From: Dave Runkle X-X-Sender: dave@trittico.fiddi.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Warning banners (MOTD) In-Reply-To: <1009186568.3c26f7080d865@mail.broadpark.no> Message-ID: <20011224054320.J484-100000@trittico.fiddi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I use one that I lifted from the OpenBSD box; how about some other suggestions? * * * * * * * * * * * * * W A R N I N G * * * * * * * * * * * * * * THIS SYSTEM IS RESTRICTED TO AUTHORIZED USERS FOR AUTHORIZED USE ONLY! UNAUTHORIZED ACCESS IS STRICTLY PROHIBITED AND MAY BE PUNISHABLE UNDER THE COMPUTER FRAUD AND ABUSE ACT OF 1986, OR OTHER APPLICABLE LAWS. IF NOT AUTHORIZED TO ACCESS THIS SYSTEM, DISCONNECT NOW. BY CONTINUING, YOU CONSENT TO YOUR KEYSTROKES AND DATA CONTENT BEING MONITORED. ALL PERSONS ARE HEREBY NOTIFIED THAT THE USE OF THIS SYSTEM CONSTITUTES CONSENT TO MONITORING AND AUDITING. * * * * * * * * * * * * * W A R N I N G * * * * * * * * * * * * * * To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 6: 9:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 4454737B41B for ; Mon, 24 Dec 2001 06:09:57 -0800 (PST) Received: from barbish ([63.70.155.122]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Mon, 24 Dec 2001 09:12:03 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: RE: CVSup Servers Date: Mon, 24 Dec 2001 09:09:53 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011224043547.183FC1F05@mail.microbsd.net> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Why not check out the online handbook section a.6.7 CVSup Sites. It gives the sites location. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of OutBack Dingo Sent: Sunday, December 23, 2001 11:38 PM To: jason@jason-n3xt.org; questions@freebsd.org Subject: Re: CVSup Servers I always use cvsup 9 or 10, they are very fast On Sunday 23 December 2001 11:33 pm, Jason Halbert wrote: > I just checked and cvsup3 is working for me again. I like cvsup3 > because I always get a fast connection to it. Maybe I should > traceroute a few servers to find out which I am closest to. > > *shrug* > > Happy Christmas > > Jason > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 7:21:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from retis.fr (retis.retis.fr [194.98.180.41]) by hub.freebsd.org (Postfix) with ESMTP id A3EE437B417 for ; Mon, 24 Dec 2001 07:21:08 -0800 (PST) Received: from firewall by retis.fr (8.8.8+Sun/SMI-SVR4) id QAA10857; Mon, 24 Dec 2001 16:19:49 GMT Message-ID: <003e01c18c8e$beb71a00$063215ac@retis.fr> From: "Florian Perves" To: Subject: processes et jobs Date: Mon, 24 Dec 2001 16:22:04 +0100 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_003B_01C18C97.1FC2E060" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_003B_01C18C97.1FC2E060 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Bonjour, je viens de lire le handbook sur freebsd.org, mais je n'ai toujours pas = de r=E9ponse =E0 cette question : comment basculer un processus lanc=E9 en arri=E8re plan dans un premier = shell, en premier plan dans un autre shell. c'est pas forc=E9ment clair...un exemple : dans un premier shell en console, je fais un "nohup &" et je voudrais faire passer en "foreground" cette dans ma = session telnet par exemple. Comment dois-je faire ? la commande "jobs" est manifestement = d=E9pendante d'un shell, car depuis ma session telnet, je ne vois pas = les processus lanc=E9s depuis mon premier shell. merci pour votre aide. -- Florian Perves RetiS Communication - Palaiseau branch office Phone : +33 1 64 53 14 11 Telecopy : +33 1 69 32 14 02 fperves@retis.fr - http://www.retis.fr ------=_NextPart_000_003B_01C18C97.1FC2E060 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Bonjour,
 
je viens de lire le handbook sur = freebsd.org, mais=20 je n'ai toujours pas de r=E9ponse =E0 cette question :
comment basculer un processus lanc=E9 = en arri=E8re=20 plan dans un premier shell, en premier plan dans un autre = shell.
 
c'est pas forc=E9ment clair...un = exemple=20 :
dans un premier shell en console, je = fais un=20 "nohup <commande> &"
et je voudrais faire passer en=20 "foreground" cette <commande> dans ma session telnet par = exemple.
Comment dois-je faire ? la commande = "jobs" est=20 manifestement d=E9pendante d'un shell, car depuis ma session telnet, je = ne vois=20 pas les processus lanc=E9s depuis mon premier shell.
 
merci pour votre aide.
--
 
Florian Perves
RetiS Communication = - Palaiseau=20 branch office
Phone : +33 1 64 53 14 11
Telecopy : +33 1 69 32 14 = 02
fperves@retis.fr - http://www.retis.fr
 
 
------=_NextPart_000_003B_01C18C97.1FC2E060-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 8:15: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 473C237B405 for ; Mon, 24 Dec 2001 08:15:02 -0800 (PST) Received: from Tom_Parquette [24.24.29.69] by myrealbox.com with NIMS ModWeb Module; Mon, 24 Dec 2001 11:14:56 -0500 Subject: Re: FreeBsd inquire From: Tom Parquette To: a_neil@eudoramail.com, Cc: freebsd-questions@FreeBSD.ORG, Date: Mon, 24 Dec 2001 11:14:56 -0500 X-Mailer: NIMS ModWeb Module X-Sender: Tom_Parquette MIME-Version: 1.0 Message-ID: <1009210496.6f264ff2Tom_Parquette@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Chapter 2 of the FreeBSD Handbook explains the installation process from st= art to end. The Handbook is a good reference (www.freebsd.org/handbook) The answer to your specific question is towards the end of http://www.freeb= sd.org/doc/en_US.ISO8859-1/books/handbook/install-pre.html Cheers... -----Original Message----- From: "neil alcoseba" To: freebsd-questions@FreeBSD.ORG Date: Mon, 24 Dec 2001 05:08:01 -0800 Subject: FreeBsd inquire Greetings! Where can I free download the freebsd installer and what are the necessary = files to download in order to boot up on a floppy disk. Thank you and the information is highly appreciated. Sincerely yours, Neil Alcoseba Join 18 million Eudora users by signing up for a free Eudora Web-Mail accou= nt at http://www.eudoramail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message Try not. Do or do not. There is no try. -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 8:58:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hermes.cedalion.net (216.215.192.2.nw.nuvox.net [216.215.192.2]) by hub.freebsd.org (Postfix) with ESMTP id F3CE037B405; Mon, 24 Dec 2001 08:58:17 -0800 (PST) Received: from geoladm.geol.queensu.ca (196.40.33.218) by hermes.cedalion.net (WorldMail 1.3.122); 24 Dec 2001 11:55:55 -0500 MIME-Version: 1.0 X-Encoding: MIME Content-Type: multipart/alternative; boundary="----=_NextPart_5332743608677" Subject: Brand New AAA Credit! -oari Message-Id: <833y7u852exu1j6amg7.d5jw2l852d3t44gd7oc1@geoladm.geol.queensu.ca> X-MSMail-Priority: Normal Reply-To: yammer2489@yahoo.com Importance: Normal From: sorby2777@hryd.yahoo.com Date: Sun, 23 Dec 2001 22:04:51 -0800 To: postmaster@ddhhyxrcd.freebsd.com X-Priority: 3 (Normal) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_5332743608677 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Here's How You Can Have a Brand New Credit Profile in 24 Hours! The Best Part is... It's 100% Legal, 100% Ethical, and Fully GUARANTEED! -------------------------------------------------------------------------------- Dear Friend, Do you have bad credit, judgements, bankruptcies or any other credit problems? Does it seem like your bad credit is holding you back from qualifying for a major credit card, car loan, or even a department store card? Are you sick of the embarrassment of being rejected at your attempts to get any credit at all? If so... I've got some extremely good news for you. -------------------------------------------------------------------------------- I Will Show You Precisely How to Get a New, Separate, Clean Credit File... and it will be Clear of Any Past Credit History! And it's 100% LEGAL! It doesn't matter, if you have judgements! It doesn't matter, if you've filed for bankruptcy! It doesn't matter, if you've been foreclosed! It doesn't matter, if you have a tax lien! It doesn't matter, if have been a slow payer in the past! It Doesn't Matter, Because Your Credit File Will Be Completely New And Completely Independent Of Any Negative Past File! With my kit...within the next 60 days, you will quickly and easily Get ALL Major Credit Cards Learn Basic and Advanced Credit Billing Techniques Get Bank Loans FAST and Simple Get Mortgages NOW Have AAA Credit on "Your Brand New File" in 30-60 Days Get INSTANT Credit From Real Department Stores Car Loans FAST and SIMPLE And much, much more! CLICK HERE TO LEARN MORE! http://www.whammyweb.org/newcreditfile/index.html?marketing_id=cr44 -------------------------------------------------------------------------------- This email was sent to you in full compliance with all existing and proposed email legislation. You may automatically remove yourself from any future mailings by clicking here. http://www.whammyweb.org/remove.html The reply address on this email was active at the time this email was sent. ------=_NextPart_5332743608677 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Instantly Get a Brand New AAA Credit Profile in 24 Hours!
Here's How You Can Have a Brand New
Credit Profile in 24 Hours!=
The Best Part is... It's 100% Legal, 100% Ethical, and Fully GUARANTEED!=
Dear Friend,=

Do you have bad credit, judgements, bankruptcies or
any other credit = problems? Does it seem like your bad
credit is holding you back from qualifying for a major
credit card, car loan, or even a department store card?

Are you sick of the embarrassment of being rejected at
your attempts to get any credit at all? If so... I've got
some extremely good news for you.

I Will Show You Precisely How to Get a New, Separate, Clean
Credit File... and it will be Clear of Any Past Credit History!=

And it's 100% LEGAL!

  • It doesn't matter, if you have judgements!
  • It doesn't matter, if you've filed for bankruptcy!=
  • It doesn't matter, if you've been foreclosed!
  • It doesn't matter, if you have a tax lien!
  • It doesn't matter, if have been a slow payer in the past!
It Doesn't Matter, Because Your Credit File Will Be = Completely
New And Completely Independent Of Any Negative Past File!=

With my kit...within the next 60 days, you will quickly and easily

  • Get ALL Major Credit = Cards
  • Learn Basic and Advanced Credit Billing Techniques
  • Get Bank Loans FAST and Simple
  • Get Mortgages = NOW
  • Have AAA Credit on "Your Brand New File" in 30-60 Days
  • Get INSTANT Credit From Real Department Stores
  • Car Loans FAST and = SIMPLE

    • And much, much more!=
     
     

    CLICK HERE TO LEARN MORE!=

    This email was sent to you in full = compliance with all existing and proposed email legislation.
    You may automatically remove yourself from any future = mailings by clicking here. The reply address on this email was = active
    at the time this email was sent.
------=_NextPart_5332743608677-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 9:45:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id C8F5137B41C for ; Mon, 24 Dec 2001 09:45:51 -0800 (PST) Received: from barbish ([63.70.155.122]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Mon, 24 Dec 2001 12:47:58 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: Ports Midnight Commander Date: Mon, 24 Dec 2001 12:45:49 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I installed the ports Midnight Commander /usr/ports/misc/mc I rebooted and enter mc on the command line and get command not found. Them went to http://www.gnome.org/projects/mc/ to look for instructions on How to use and there were none. Anybody know how to start Midnight Commander or where the docs are? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 9:53:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 190E137B430 for ; Mon, 24 Dec 2001 09:53:28 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBOHrMx04058 for ; Mon, 24 Dec 2001 19:53:23 +0200 Message-Id: <200112241753.fBOHrMx04058@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: dcopserver Date: Mon, 24 Dec 2001 17:53:22 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG when I do startx in a few seconds the following appears: "There was an error setting up inter-process communications for KDE. The message returned by the system was: Could not read network connection list /home/uwiman/.DCOPserver_elexis.uwiland.com_:0 Please check that the "dcopserver" program is running!" If I do Ctrl-ALT-F1 I see the following: " kdeinit:Launched DCOPServer, pid = 378 result = 0 _KDE_IceTransSocketUNIXCreateListener:...SocketCreateListener() failed _KDE_IceTransMakeAllCOTSServerListeners: server already running Cannot establish any listening sockets DCIOServer self-test failed. kdeinit:DCOPServer could not be started, aboting. ERROR: KUniqueApplication: Can't setup DCOP communication" the funny thing is if I re-start X a few times it might actually go thru procedure with no errors.... but thats irritating you know. whats going on and how to fix it on permanent basis? Thanks in advance. FreeBSD 4.4 Rel, KDE 2.2 --uwi mAn. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 9:53:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freyr.cba.ualr.edu (freyr.cba.ualr.edu [144.167.120.20]) by hub.freebsd.org (Postfix) with ESMTP id 2108037B42C for ; Mon, 24 Dec 2001 09:53:26 -0800 (PST) Received: (from joe@localhost) by freyr.cba.ualr.edu (8.11.6/8.11.6) id fBOHptQ04139; Mon, 24 Dec 2001 11:51:55 -0600 (CST) (envelope-from joe) Date: Mon, 24 Dec 2001 11:51:55 -0600 From: "Joseph E. Royce" To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: Ports Midnight Commander Message-ID: <20011224115155.A4063@freyr.cba.ualr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Mon, Dec 24, 2001 at 12:45:49PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 12:45:49PM -0500, Joe & Fhe Barbish wrote: > I installed the ports Midnight Commander /usr/ports/misc/mc > I rebooted and enter mc on the command line and get command not found. > Them went to http://www.gnome.org/projects/mc/ to look for instructions on > How to use and there were none. > > Anybody know how to start Midnight Commander or where the docs are? > On FreeBSD, it's installed as midc, not mc. -Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10: 1:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chmls05.mediaone.net (chmls05.mediaone.net [24.147.1.143]) by hub.freebsd.org (Postfix) with ESMTP id 83ECF37B405 for ; Mon, 24 Dec 2001 10:01:20 -0800 (PST) Received: from be-well.ilk.org (lowellg.ne.mediaone.net [24.147.188.158]) by chmls05.mediaone.net (8.11.1/8.11.1) with ESMTP id fBOI1A919267; Mon, 24 Dec 2001 13:01:10 -0500 (EST) Received: (from lowell@localhost) by be-well.ilk.org (8.11.6/8.11.4) id fBOI1Ic24290; Mon, 24 Dec 2001 13:01:18 -0500 (EST) (envelope-from lowell) To: freebsd-questions@freebsd.org, barbish@a1poweruser.com Subject: Re: Ports Midnight Commander References: From: Lowell Gilbert Date: 24 Dec 2001 13:01:17 -0500 In-Reply-To: barbish@a1poweruser.com's message of "25 Dec 2001 01:46:18 +0800" Message-ID: <441yhkqyz6.fsf@lowellg.ne.mediaone.net> Lines: 11 X-Mailer: Gnus v5.7/Emacs 20.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG barbish@a1poweruser.com ("Joe & Fhe Barbish") writes: > I installed the ports Midnight Commander /usr/ports/misc/mc > I rebooted and enter mc on the command line and get command not found. > Them went to http://www.gnome.org/projects/mc/ to look for instructions on > How to use and there were none. > > Anybody know how to start Midnight Commander or where the docs are? Check the port itself to be sure ('pkg_info -L mc*'), but I think Midnight commander is installed as "midc", not "mc". To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10: 9:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 00CBC37B419 for ; Mon, 24 Dec 2001 10:09:46 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBOI9ix04721 for ; Mon, 24 Dec 2001 20:09:45 +0200 Message-Id: <200112241809.fBOI9ix04721@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: mplayer Date: Mon, 24 Dec 2001 18:09:44 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG the one I installed (from ports) doesnt come with DVD support... says something... :DVD support was not compiled in: i guess Im out of luck or what? Thanks. --uwi mAn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10:18:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ganja.nubisci.net (ikhala.tcimet.net [198.109.166.215]) by hub.freebsd.org (Postfix) with ESMTP id 1A0DB37B419 for ; Mon, 24 Dec 2001 10:18:36 -0800 (PST) Received: (from guru@localhost) by ganja.nubisci.net (8.11.6/8.11.4) id fBOIIUt13474; Mon, 24 Dec 2001 13:18:30 -0500 (EST) (envelope-from guru) Date: Mon, 24 Dec 2001 13:18:16 -0500 From: GuRU To: ipfilter@coombs.anu.edu.au Cc: freebsd-questions@freebsd.org Subject: ipf/ipnat strangeness freebsd-current Message-ID: <20011224131816.A20795@nubisci.net> Mail-Followup-To: ipfilter@coombs.anu.edu.au, freebsd-questions@freebsd.org References: <20011104171404.A25705@nubisci.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011104171404.A25705@nubisci.net>; from guru@nubisci.net on Sun, Nov 04, 2001 at 05:14:04PM -0500 X-Operating-System: FreeBSD 5.0-CURRENT i386 WWW-Home-Page: http://www.nubisci.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all :). This is a continuing problem i'm seeing on my firewall box running on a freebsd -curent box. ganja.nubisci.net:ipfilter# ipf -V ipf: IP Filter: v3.4.20 (264) Kernel: IP Filter: v3.4.20 Running: yes Log Flags: 0 = none set Default: pass all, Logging: available Active list: 0 the contents of my ipf.rules: # ipf.rules # interface naming: # fxp0 = internet, addr=198.109.166.215/32 # fxp1 = local private net, addr=192.168.0.1/24 # pass in log on fxp0 all pass out log on fxp0 all pass in log on fxp1 all pass out log on fxp1 all the contents of my ipnat.rules: map fxp0 192.168.0.1/24 -> 198.109.166.215/32 portmap tcp/udp 1025:65000 map fxp0 192.168.0.1/24 -> 198.109.166.215/32 the following was generated by the following command from the client machine (blunted) from behind the firewall (ganja) blunted.nubisci.net:guru% traceroute -S ftp.freebsd.org traceroute to ftp.beastie.tdk.net (62.243.72.50), 64 hops max, 40 byte packets 1 ganja (192.168.0.1) 0.584 ms 0.421 ms 0.414 ms (0% loss) 2 198.109.166.193 (198.109.166.193) 3.820 ms * 3.793 ms (33% loss) 3 * com-rtr-ve61.net.msu.edu (35.12.51.1) 6.774 ms * (66% loss) 4 cc-rtr-ge15.net.msu.edu (35.9.101.13) 3.294 ms * 6.656 ms (33% loss) 5 * g3-0.msu4.mich.net (35.9.82.114) 3.542 ms * (66% loss) 6 198.108.23.129 (198.108.23.129) 8.600 ms * 8.914 ms (33% loss) 7 * 63-149-0-185.cust.qwest.net (63.149.0.185) 13.153 ms * (66% loss) 8 chi-core-01.inet.qwest.net (205.171.20.121) 13.097 ms * 36.202 ms (33% loss) 9 * jfk-core-02.inet.qwest.net (205.171.5.11) 35.924 ms * (66% loss) 10 jfk-brdr-01.inet.qwest.net (205.171.30.18) 34.238 ms * 32.919 ms (33% loss) 11 * nyk-bb1-pos3-0-0.telia.net (213.248.82.93) 36.484 ms * (66% loss) 12 nyk-i1-pos1-0.telia.net (213.248.82.14) 38.008 ms * 32.876 ms (33% loss) 13 * teledk-2.k.telia.net (213.248.82.114) 33.632 ms * (66% loss) 14 pos3-0.622M.albnxg2.ip.tele.dk (195.249.2.233) 140.264 ms * 140.361 ms (33% loss) 15 * pos6-0.2488M.albnxg1.ip.tele.dk (195.249.4.165) 142.779 ms * (66% loss) 16 pos7-0.2488M.arcnxg1.ip.tele.dk (195.249.6.126) 183.184 ms * 150.709 ms (33% loss) 17 * pos4-0.2488M.opanxg1.ip.tele.dk (195.249.2.162) 140.144 ms * (66% loss) 18 ge2-2.1000M.d3.opa.tdk.net (193.163.158.169) 140.438 ms * 147.625 ms (33% loss) 19 * vlan30.d6.opa.tdk.net (62.243.72.206) 140.845 ms * (66% loss) 20 vlan30.d6.opa.tdk.net (62.243.72.206) 140.595 ms !X * 140.899 ms !X (33% loss) running tcpdump on both the public and private interface yields: fxp1 ==> private interface ganja.nubisci.net:ipfilter# fgrep udp tcpdump-r.fxp1 | head -20 21:12:07.497662 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33435: udp 12 [ttl 1] 21:12:07.500150 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33436: udp 12 [ttl 1] 21:12:07.501165 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33437: udp 12 [ttl 1] 21:12:07.502815 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33438: udp 12 21:12:07.509313 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33439: udp 12 21:12:12.511339 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33440: udp 12 21:12:12.516048 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33441: udp 12 21:12:17.521119 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33442: udp 12 21:12:17.530678 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33443: udp 12 21:12:22.541760 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33444: udp 12 21:12:22.547954 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33445: udp 12 21:12:27.551830 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33446: udp 12 21:12:27.557562 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33447: udp 12 21:12:32.561690 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33448: udp 12 21:12:32.567822 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33449: udp 12 21:12:37.572378 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33450: udp 12 21:12:37.581144 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33451: udp 12 21:12:42.592764 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33452: udp 12 21:12:42.599665 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33453: udp 12 21:12:47.602439 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33454: udp 12 Every 5 seconds two packets come in. Now for the other side ... fxp0 ==> public interface ganja.nubisci.net:ipfilter# fgrep udp tcpdump-r.fxp0 | fgrep beastie | head -20 21:12:07.502934 nubisci.net.1165 > ftp.beastie.tdk.net.33438: udp 12 [ttl 1] 21:12:07.509326 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33439: udp 12 [ttl 1] 21:12:12.511472 nubisci.net.1166 > ftp.beastie.tdk.net.33440: udp 12 [ttl 1] 21:12:12.516059 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33441: udp 12 21:12:17.521257 nubisci.net.phone > ftp.beastie.tdk.net.33442: udp 12 21:12:17.530695 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33443: udp 12 21:12:22.541915 nubisci.net.1168 > ftp.beastie.tdk.net.33444: udp 12 21:12:22.547968 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33445: udp 12 21:12:27.551968 nubisci.net.1169 > ftp.beastie.tdk.net.33446: udp 12 21:12:27.557580 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33447: udp 12 21:12:32.561828 nubisci.net.1170 > ftp.beastie.tdk.net.33448: udp 12 21:12:32.567836 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33449: udp 12 21:12:37.572533 nubisci.net.1171 > ftp.beastie.tdk.net.33450: udp 12 21:12:37.581159 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33451: udp 12 21:12:42.592902 nubisci.net.1172 > ftp.beastie.tdk.net.33452: udp 12 21:12:42.599677 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33453: udp 12 21:12:47.602583 nubisci.net.1173 > ftp.beastie.tdk.net.33454: udp 12 21:12:47.619030 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33455: udp 12 21:12:52.623139 nubisci.net.1174 > ftp.beastie.tdk.net.33456: udp 12 21:12:52.642401 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33457: udp 12 The first three packets that were seen on the inside expire on the firewall. After that it appears that every other packet is NATed and the other is being passed unchanged :( (Thanks to Crist J. Clark for his analysis) Now i need to know if anyone has seen this behavior before. Either way I need some assistance in finding out why this is happening. Any help would be appreciated. :) #;@0 -- Comparing information and knowledge is like asking whether the fatness of a pig is more or less green than the designated hitter rule." -- David Guaspari To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10:29: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 7EF4637B417 for ; Mon, 24 Dec 2001 10:29:06 -0800 (PST) Received: from colt.ncptiddische.net (ppp-215.wobline.de [212.68.69.226]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBOIT4826693 for ; Mon, 24 Dec 2001 19:29:04 +0100 Received: from tisys.org (jodie.ncptiddische.net [192.168.0.2]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBOIV7X61184 for ; Mon, 24 Dec 2001 19:31:07 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBOITsc89337 for freebsd-questions@freebsd.org; Mon, 24 Dec 2001 19:29:54 +0100 (CET) (envelope-from nils) Date: Mon, 24 Dec 2001 19:29:19 +0100 From: Nils Holland To: freebsd-questions@freebsd.org Subject: Questions to all script wizards out there... Message-ID: <20011224192919.A89314@tisys.org> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD jodie.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 7:19PM up 9:53, 2 users, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, there are many things that I'd like to eventually learn, for example writing advanced shell scripts. Right now, I'd like to set up a script for a particular purpose, but I don't really know how to go about it. Here's what this script should do: I would like the script to use wget in order to fetch the program listing of a radio station from the station's website. I would like to have seven days fetched in advance. Now, the URL always looks like this: http://www.dradio.de/dlf/vorschau///.html So in order to make wget fetch today's program, I'd run it like this: wget -options http://www.dradio.de/dlf/vorschau/2001/12/24.html That's the theory, but how do I tell my shell script to do that? I have two problems, one of which is probably easy to solve, while the other is a little tough: 1) The shell script would have to have a look at today's date and construct the appropriate URL. It would probably have to obtain the output of date and assign the year, month and day values to some variables, and then create the http://www.dradio.de/dlf/vorschau///.html URL. Now, any ideas how to get that done in a script? 2) As I said, I'd like to get seven days fetched in advance. An easy way to do that would be to simply loop multiple times, always incrementing by one. However, not each month has the same number of days, so assuming that after has reached 31 it should start from 1 again is not always accurate. I guess handling this in a shell script would be a fairly hard thing to do, but if someone has any ideas if it's (easily) possible, I'd like to know it. Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10:36: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sparc1.amuser-net.ne.jp (sparc1.amuser-net.ne.jp [210.164.150.34]) by hub.freebsd.org (Postfix) with ESMTP id 61D7337B41A for ; Mon, 24 Dec 2001 10:35:59 -0800 (PST) Received: from mcp38 (host210232026182.kakita.co.jp [210.232.26.182]) by sparc1.amuser-net.ne.jp (8.9.3/3.7Wpl2/DEKIRU1.00) with SMTP id AAA00993; Tue, 25 Dec 2001 00:34:13 +0900 Message-ID: <002701c18c90$73fb1aa0$7900a8c0@kakita.co.jp> From: "=?iso-2022-jp?B?RFYbJEIlLyVpJVYbKEI=?=" To: Subject: =?iso-2022-jp?B?GyRCIzEjMiFBIzEjNTpQJWIlRyVrJE42W0d7JVMlRyUqGyhC?= Date: Tue, 25 Dec 2001 00:13:49 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG $B%b%G%k$NA*9M$+$i;22C$7$F$b$i$&%;%_%*!<%@!<%a%$%IJ}(B $B<0$G$9!#(B $B%;!<%i!3Q1Q;z$G(B kinbaku $B$H$7$F$/$@$5$$!J$=$l0J30$N$b$N!"E:IU%U%!%$%k$r4^(B $B$`$b$N$J$I$O<+F0GK4~$5$l$k>l9g$,$"$j$^$9!K!#(B $B$^$?!"G/Kv$,Gw$C$F$^$9$N$GJV?.$O$*Aa$a$K%A%'%C%/(B $B$7$F$/$@$5$$!#(B To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10:51: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 4B39737B416 for ; Mon, 24 Dec 2001 10:51:06 -0800 (PST) Received: (from dan@localhost) by dan.emsphone.com (8.11.6/8.11.6) id fBOIp3E21774; Mon, 24 Dec 2001 12:51:03 -0600 (CST) (envelope-from dan) Date: Mon, 24 Dec 2001 12:51:02 -0600 From: Dan Nelson To: Nils Holland Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Questions to all script wizards out there... Message-ID: <20011224185102.GB37641@dan.emsphone.com> References: <20011224192919.A89314@tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011224192919.A89314@tisys.org> User-Agent: Mutt/1.3.24i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Dec 24), Nils Holland said: > So in order to make wget fetch today's program, I'd run it like this: > > wget -options http://www.dradio.de/dlf/vorschau/2001/12/24.html > > That's the theory, but how do I tell my shell script to do that? I > have two problems, one of which is probably easy to solve, while the > other is a little tough: > > 1) The shell script would have to have a look at today's date and > construct the appropriate URL. It would probably have to obtain the .. > 2) As I said, I'd like to get seven days fetched in advance. An easy way to > do that would be to simply loop multiple times, always incrementing The 'date' command will do both. $ date +"%Y/%m/%d" 2001/12/24 $ date -v +8d +"%Y/%m/%d" 2002/01/01 -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 10:56:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id 9C64B37B416 for ; Mon, 24 Dec 2001 10:56:18 -0800 (PST) Received: (qmail 13750 invoked from network); 24 Dec 2001 18:56:11 -0000 Received: from dap-209-166-133-128.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.128) by smtp3.mx.pitdc1.stargate.net with SMTP; 24 Dec 2001 18:56:11 -0000 Received: (qmail 10805 invoked from network); 24 Dec 2001 18:56:35 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 24 Dec 2001 18:56:35 -0000 From: "Doug Reynolds" To: "freebsd-questions@FreeBSD.org" , "Jud" Date: Mon, 24 Dec 2001 13:57:28 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011224013346.264ddc0e.jud@operamail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: FQDN, Apache2, and Postfix Message-Id: <20011224185618.9C64B37B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 01:33:46 -0500, Jud wrote: >I installed the Apache 2 port a couple of weeks ago. When I try >to run it (apachectl start), I get the following message: > >httpd: Could not determine the server's fully qualified domain >name, using 127.0.0.1 for ServerName >/usr/local/sbin/apachectl start: httpd could not be started > >I also recall a problem regarding lack of a fully qualified domain >name when I installed and tried to configure postfix. > >I'm on a dialup connection with a dynamically assigned IP address. > >I'd appreciate advice and suggestions, either in the form of >"Here's what to do," or "Here's where to find out what to do." i believe you'll need to get a domain or hostname to resolve to an ip address. i use www.easydns.com and ez-ipupdate to do that for myself i run apache 1.3 and qmail on mine. --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:18: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-31-201-166.mmcable.com [65.31.201.166]) by hub.freebsd.org (Postfix) with SMTP id 786AD37B417 for ; Mon, 24 Dec 2001 11:17:58 -0800 (PST) Received: (qmail 33371 invoked by uid 100); 24 Dec 2001 19:17:54 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15399.32610.314825.24529@guru.mired.org> Date: Mon, 24 Dec 2001 13:17:54 -0600 To: Jim Freeze Cc: questions@freebsd.org Subject: Re: Smooth transition possible when switching ISP? In-Reply-To: <77889233@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ X-Delivery-Agent: TMDA v0.42/Python 2.1.1 (freebsd4) From: "Mike Meyer" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jim Freeze types: > I have a web server on a box at home that uses > the cable provider @home. I am using granite canyon > as the name server provider. (The IP is dhcp but has > not changed for over a year.) I plan this month to > switch to DSL (and thus will get a new static IP). > Currently, both networks are active. I don't know anything about granite canyon, but the work has to happen on their end. If they are set up as a "dns for dynamic IP hosts" type deal, then just switching to the new IP address should do the trick. > It would be nice if I could limit that downtime. > > Can anyone give me some suggestions as the best way > to make this transition. Note the expiration time on the current DNS, then lower it to something short. Wait until after the old expiration time has passed. Change the DNS to use the new IP address. You can now raise the expiration time back to the old one. The "downtime" will be the shorter expiration time you used in the middle. Except, of course, that some people may have an IP cache that is ignoring the expiration time you set. You can't do much about them. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:21: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id CE04E37B4CF for ; Mon, 24 Dec 2001 11:20:53 -0800 (PST) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id EAADB91; Mon, 24 Dec 2001 10:20:46 -0900 (AKST) From: Beech Rintoul To: uwi@mail.delfi.lv, questions@freebsd.org Subject: Re: dcopserver Date: Mon, 24 Dec 2001 10:20:46 -0900 X-Mailer: KMail [version 1.3] References: <200112241753.fBOHrMx04058@smtp.delfi.lv> In-Reply-To: <200112241753.fBOHrMx04058@smtp.delfi.lv> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="------------Boundary-00=_ME4VTORQRHIWWA6Y2I9I" Message-Id: <20011224192047.EAADB91@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --------------Boundary-00=_ME4VTORQRHIWWA6Y2I9I Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit On Monday 24 December 2001 08:53 am, uwi@mail.delfi.lv wrote: > when I do startx in a few seconds the following appears: > "There was an error setting up inter-process communications for KDE. The > message returned by the system was: > Could not read network connection list > /home/uwiman/.DCOPserver_elexis.uwiland.com_:0 > Please check that the "dcopserver" program is running!" > > > If I do Ctrl-ALT-F1 I see the following: > " > kdeinit:Launched DCOPServer, pid = 378 result = 0 > _KDE_IceTransSocketUNIXCreateListener:...SocketCreateListener() failed > _KDE_IceTransMakeAllCOTSServerListeners: server already running > Cannot establish any listening sockets > DCIOServer self-test failed. > kdeinit:DCOPServer could not be started, aboting. > ERROR: KUniqueApplication: Can't setup DCOP communication" > > the funny thing is if I re-start X a few times it might actually go thru > procedure with no errors.... but thats irritating you know. > > whats going on and how to fix it on permanent basis? > > Thanks in advance. > > FreeBSD 4.4 Rel, KDE 2.2 > > --uwi > mAn. > Apply this patch I got from one of the KDE developers and rebuild kdelibs. This seems to be a FreeBSD problem, but the patch solved the problem for me. Beech ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- --------------Boundary-00=_ME4VTORQRHIWWA6Y2I9I Content-Type: text/x-diff; charset="iso-8859-1"; name="KDE-ICE.diff" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="KDE-ICE.diff" SW5kZXg6IGxpc3Rlbi5jCj09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT0KLXxSQ1MgZmlsZTogL3Vzci9wb3J0cy94MTEva2Rl bGliczIvd29yay9rZGVsaWJzLTIuMi4xL2Rjb3AvS0RFLUlDRS9saXN0ZW4uYyx2Cit8UkNTIGZp bGU6IC91c3IvcG9ydHMveDExL2tkZWxpYnMyL3dvcmsva2RlbGlicy0yLjIuMS9kY29wL0tERS1J Q0UvbGlzdGVuLmMsdgpyZXRyaWV2aW5nIHJldmlzaW9uIDEuMXJldHJpZXZpbmcgcmV2aXNpb24g MS4yCmRpZmYgLXUgLTMgLWQgLXAgLXIxLjEgLXIxLjIKLS0tIGxpc3Rlbi5jCTIwMDEvMDMvMTAg MDY6MDA6MDcJMS4xCisrKyBsaXN0ZW4uYwkyMDAxLzA5LzI3IDA1OjA3OjAxCTEuMgpAQCAtMzIs NiArMzIsNyBAQCBBdXRob3I6IFJhbHBoIE1vciwgWCBDb25zb3J0aXVtCiAjaW5jbHVkZSAiS0RF LUlDRS9JQ0VsaWJpbnQuaCIKICNpbmNsdWRlICJLREUtSUNFL1h0cmFucy5oIgogI2luY2x1ZGUg PHN0ZGlvLmg+CisjaW5jbHVkZSA8dGltZS5oPgogCiAMCiBTdGF0dXMKQEAgLTQ2LDEyICs0Nywy MSBAQCBjaGFyCQkqZXJyb3JTdHJpbmdSZXQ7CiAgICAgc3RydWN0IF9JY2VMaXN0ZW5PYmoJKmxp c3Rlbk9ianM7CiAgICAgY2hhcgkJCSpuZXR3b3JrSWQ7CiAgICAgaW50CQkJCXRyYW5zQ291bnQs IHBhcnRpYWwsIGksIGo7CisgICAgaW50ICAgICAgICAgICAgICAgICAgICAgICAgIHJlc3VsdCA9 IC0xOworICAgIGludCAgICAgICAgICAgICAgICAgICAgICAgICBjb3VudCA9IDA7CiAgICAgU3Rh dHVzCQkJc3RhdHVzID0gMTsKICAgICBYdHJhbnNDb25uSW5mbwkJKnRyYW5zQ29ubnMgPSBOVUxM OwogCisgICAgd2hpbGUgKChyZXN1bHQgPCAwKSAmJiAoY291bnQgPCA1KSkgCisgICAgeworICAg ICAgIGNoYXIgYnVmWzEyOF07CisgICAgICAgc3ByaW50ZihidWYsICJkY29wJWQtJWQiLCBnZXRw aWQoKSwgdGltZShOVUxMKStjb3VudCk7CisgICAgICAgcmVzdWx0ID0gX0tERV9JY2VUcmFuc01h a2VBbGxDT1RTU2VydmVyTGlzdGVuZXJzIChidWYsICZwYXJ0aWFsLAorICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICZ0cmFuc0NvdW50LCAmdHJhbnNDb25ucyk7 CisgICAgICAgY291bnQrKzsKKyAgICB9CiAKLSAgICBpZiAoKF9LREVfSWNlVHJhbnNNYWtlQWxs Q09UU1NlcnZlckxpc3RlbmVycyAoTlVMTCwgJnBhcnRpYWwsCi0JJnRyYW5zQ291bnQsICZ0cmFu c0Nvbm5zKSA8IDApIHx8ICh0cmFuc0NvdW50IDwgMSkpCisgICAgaWYgKChyZXN1bHQgPCAwKSB8 fCAodHJhbnNDb3VudCA8IDEpKQogICAgIHsKIAkqbGlzdGVuT2Jqc1JldCA9IE5VTEw7CiAJKmNv dW50UmV0ID0gMDsK --------------Boundary-00=_ME4VTORQRHIWWA6Y2I9I-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:25:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 029C937B405 for ; Mon, 24 Dec 2001 11:25:50 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id NAA26426; Mon, 24 Dec 2001 13:25:46 -0600 (CST) Message-Id: <3.0.5.32.20011224132528.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Mon, 24 Dec 2001 13:25:28 -0600 To: "Joe & Fhe Barbish" , "FBSD Questions" From: jacks@sage-american.com Subject: Re: Ports Midnight Commander In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If, are using the right strartup file and if you didn't reboot, your OS cannot see the executible yet.... just use the full path to the startup file e.g., #/usr/local/bin/startfile At 12:45 PM 12.24.2001 -0500, Joe & Fhe Barbish wrote: >I installed the ports Midnight Commander /usr/ports/misc/mc >I rebooted and enter mc on the command line and get command not found. >Them went to http://www.gnome.org/projects/mc/ to look for instructions on >How to use and there were none. > >Anybody know how to start Midnight Commander or where the docs are? > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:27:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-31-201-166.mmcable.com [65.31.201.166]) by hub.freebsd.org (Postfix) with SMTP id 8206F37B420 for ; Mon, 24 Dec 2001 11:27:26 -0800 (PST) Received: (qmail 33469 invoked by uid 100); 24 Dec 2001 19:27:25 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15399.33181.253965.389404@guru.mired.org> Date: Mon, 24 Dec 2001 13:27:25 -0600 To: Tony Landells Cc: questions@freebsd.org Subject: Re: compact flash cards In-Reply-To: <45607148@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ X-Delivery-Agent: TMDA v0.42/Python 2.1.1 (freebsd4) From: "Mike Meyer" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tony Landells types: > Hi, > > I know someone posted some information on accessing Compact Flash > cards in the last few weeks, but I've been trying for a few days > to search the mailing list archives and it keeps telling me the > archive is unavailable. > > So I apologise if this is a rehash, but I have some photos to sort > out before Christmas... > > A friend has a compact flash-based camera and a USB flash reader > (a SanDisk ImageMate SDDR-05a). I can connect the reader to my > USB port, I can see that it's detected by the USB daemon, but > I'm not sure where to go from there... To your favorite computer dealer, to buy a compact flash disk reader that works with FreeBSD? > I seem to recall seeing it had something to do with the umass > driver, and I can see that the umass module is loaded, but I > can't locate a device to mount or some other way to access the > files... I've had some problems getting usb to recognize devices that weren't compiled into the kernel, so you might try a new kernel with umass and all the things it needs and rebooting. If it doesn't recognize the thing as a umass device on boot, then the reader isn't supported. It may require nothing more than putting the device id into the umass driver somewhere. > I'm running FreeBSD 4.2R. Or updating your FreeBSD. You really should check the archives via google or marc to see if anyone has made that device work, and what they had to do to do it. Once it's recognized as a umass device, you'll get something like: umass0: Hagiwara Sys-Com SmartMedia R/W, rev 1.10/2.00, addr 2 and da3 at umass-sim0 bus 0 target 0 lun 0 so you make the da3 device - or whatever disk device it showed up for you as - in /dev, then insert the card and mount da3 as a DOS file system: mount -t dos /dev/da3s1 /mnt http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:37:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 93DF537B416 for ; Mon, 24 Dec 2001 11:37:29 -0800 (PST) Received: from twincat.vladsempire.net (hutch-1003.hutchtel.net [206.10.69.3]) by services.webwarrior.net (Postfix) with ESMTP id 93EAC2BA for ; Mon, 24 Dec 2001 13:36:57 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id A69C5386E; Mon, 24 Dec 2001 13:37:05 +0000 (GMT) Date: Mon, 24 Dec 2001 13:37:05 +0000 From: Josh Paetzel To: GuRU Cc: ipfilter@coombs.anu.edu.au, freebsd-questions@FreeBSD.ORG Subject: Re: ipf/ipnat strangeness freebsd-current Message-ID: <20011224133705.I237@twincat.vladsempire.net> Mail-Followup-To: GuRU , ipfilter@coombs.anu.edu.au, freebsd-questions@FreeBSD.ORG References: <20011104171404.A25705@nubisci.net> <20011224131816.A20795@nubisci.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011224131816.A20795@nubisci.net>; from guru@nubisci.net on Mon, Dec 24, 2001 at 01:18:16PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 01:18:16PM -0500, GuRU wrote: > Hello all :). > This is a continuing problem i'm seeing on my firewall box running on a > freebsd -curent box. > > ganja.nubisci.net:ipfilter# ipf -V > ipf: IP Filter: v3.4.20 (264) > Kernel: IP Filter: v3.4.20 > Running: yes > Log Flags: 0 = none set > Default: pass all, Logging: available > Active list: 0 > > the contents of my ipf.rules: > # ipf.rules > # interface naming: > # fxp0 = internet, addr=198.109.166.215/32 > # fxp1 = local private net, addr=192.168.0.1/24 > # > > pass in log on fxp0 all > pass out log on fxp0 all > > pass in log on fxp1 all > pass out log on fxp1 all > > the contents of my ipnat.rules: > > map fxp0 192.168.0.1/24 -> 198.109.166.215/32 portmap tcp/udp 1025:65000 > map fxp0 192.168.0.1/24 -> 198.109.166.215/32 > > the following was generated by the following command from the client machine > (blunted) from behind the firewall (ganja) > blunted.nubisci.net:guru% traceroute -S ftp.freebsd.org > traceroute to ftp.beastie.tdk.net (62.243.72.50), 64 hops max, 40 byte packets > 1 ganja (192.168.0.1) 0.584 ms 0.421 ms 0.414 ms (0% loss) > 2 198.109.166.193 (198.109.166.193) 3.820 ms * 3.793 ms (33% loss) > 3 * com-rtr-ve61.net.msu.edu (35.12.51.1) 6.774 ms * (66% loss) > 4 cc-rtr-ge15.net.msu.edu (35.9.101.13) 3.294 ms * 6.656 ms (33% loss) > 5 * g3-0.msu4.mich.net (35.9.82.114) 3.542 ms * (66% loss) > 6 198.108.23.129 (198.108.23.129) 8.600 ms * 8.914 ms (33% loss) > 7 * 63-149-0-185.cust.qwest.net (63.149.0.185) 13.153 ms * (66% loss) > 8 chi-core-01.inet.qwest.net (205.171.20.121) 13.097 ms * 36.202 ms (33% loss) > 9 * jfk-core-02.inet.qwest.net (205.171.5.11) 35.924 ms * (66% loss) > 10 jfk-brdr-01.inet.qwest.net (205.171.30.18) 34.238 ms * 32.919 ms (33% loss) > 11 * nyk-bb1-pos3-0-0.telia.net (213.248.82.93) 36.484 ms * (66% loss) > 12 nyk-i1-pos1-0.telia.net (213.248.82.14) 38.008 ms * 32.876 ms (33% loss) > 13 * teledk-2.k.telia.net (213.248.82.114) 33.632 ms * (66% loss) > 14 pos3-0.622M.albnxg2.ip.tele.dk (195.249.2.233) 140.264 ms * 140.361 ms (33% loss) > 15 * pos6-0.2488M.albnxg1.ip.tele.dk (195.249.4.165) 142.779 ms * (66% loss) > 16 pos7-0.2488M.arcnxg1.ip.tele.dk (195.249.6.126) 183.184 ms * 150.709 ms (33% loss) > 17 * pos4-0.2488M.opanxg1.ip.tele.dk (195.249.2.162) 140.144 ms * (66% loss) > 18 ge2-2.1000M.d3.opa.tdk.net (193.163.158.169) 140.438 ms * 147.625 ms (33% loss) > 19 * vlan30.d6.opa.tdk.net (62.243.72.206) 140.845 ms * (66% loss) > 20 vlan30.d6.opa.tdk.net (62.243.72.206) 140.595 ms !X * 140.899 ms !X (33% loss) > > running tcpdump on both the public and private interface yields: > fxp1 ==> private interface > ganja.nubisci.net:ipfilter# fgrep udp tcpdump-r.fxp1 | head -20 > 21:12:07.497662 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33435: udp 12 [ttl 1] > 21:12:07.500150 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33436: udp 12 [ttl 1] > 21:12:07.501165 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33437: udp 12 [ttl 1] > 21:12:07.502815 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33438: udp 12 > 21:12:07.509313 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33439: udp 12 > 21:12:12.511339 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33440: udp 12 > 21:12:12.516048 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33441: udp 12 > 21:12:17.521119 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33442: udp 12 > 21:12:17.530678 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33443: udp 12 > 21:12:22.541760 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33444: udp 12 > 21:12:22.547954 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33445: udp 12 > 21:12:27.551830 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33446: udp 12 > 21:12:27.557562 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33447: udp 12 > 21:12:32.561690 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33448: udp 12 > 21:12:32.567822 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33449: udp 12 > 21:12:37.572378 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33450: udp 12 > 21:12:37.581144 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33451: udp 12 > 21:12:42.592764 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33452: udp 12 > 21:12:42.599665 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33453: udp 12 > 21:12:47.602439 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33454: udp 12 > > Every 5 seconds two packets come in. Now for the other side ... > > fxp0 ==> public interface > ganja.nubisci.net:ipfilter# fgrep udp tcpdump-r.fxp0 | fgrep beastie | head -20 > 21:12:07.502934 nubisci.net.1165 > ftp.beastie.tdk.net.33438: udp 12 [ttl 1] > 21:12:07.509326 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33439: udp 12 [ttl 1] > 21:12:12.511472 nubisci.net.1166 > ftp.beastie.tdk.net.33440: udp 12 [ttl 1] > 21:12:12.516059 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33441: udp 12 > 21:12:17.521257 nubisci.net.phone > ftp.beastie.tdk.net.33442: udp 12 > 21:12:17.530695 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33443: udp 12 > 21:12:22.541915 nubisci.net.1168 > ftp.beastie.tdk.net.33444: udp 12 > 21:12:22.547968 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33445: udp 12 > 21:12:27.551968 nubisci.net.1169 > ftp.beastie.tdk.net.33446: udp 12 > 21:12:27.557580 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33447: udp 12 > 21:12:32.561828 nubisci.net.1170 > ftp.beastie.tdk.net.33448: udp 12 > 21:12:32.567836 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33449: udp 12 > 21:12:37.572533 nubisci.net.1171 > ftp.beastie.tdk.net.33450: udp 12 > 21:12:37.581159 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33451: udp 12 > 21:12:42.592902 nubisci.net.1172 > ftp.beastie.tdk.net.33452: udp 12 > 21:12:42.599677 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33453: udp 12 > 21:12:47.602583 nubisci.net.1173 > ftp.beastie.tdk.net.33454: udp 12 > 21:12:47.619030 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33455: udp 12 > 21:12:52.623139 nubisci.net.1174 > ftp.beastie.tdk.net.33456: udp 12 > 21:12:52.642401 blunted.nubisci.net.34762 > ftp.beastie.tdk.net.33457: udp 12 > > The first three packets that were seen on the inside expire on the firewall. > After that it appears that every other packet is NATed and the other is being > passed unchanged :( (Thanks to Crist J. Clark for his analysis) > > Now i need to know if anyone has seen this behavior before. Either way I need > some assistance in finding out why this is happening. Any help would be > appreciated. :) > > #;@0 > -- > Comparing information and knowledge is like asking whether the fatness > of a pig is more or less green than the designated hitter rule." > -- David Guaspari > This is something you need to take up on -CURRENT. You've got no business running -CURRENT on a production box in the first place, IMHO. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 11:39:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 9BC8A37B417 for ; Mon, 24 Dec 2001 11:39:21 -0800 (PST) Received: (qmail 11280 invoked from network); 24 Dec 2001 19:39:20 -0000 Received: from dap-209-166-133-128.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.128) by smtp2.mx.pitdc1.stargate.net with SMTP; 24 Dec 2001 19:39:20 -0000 Received: (qmail 21782 invoked from network); 24 Dec 2001 19:39:41 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 24 Dec 2001 19:39:41 -0000 From: "Doug Reynolds" To: "Mike Meyer" , "Tony Landells" Cc: "questions@freebsd.org" Date: Mon, 24 Dec 2001 14:40:33 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <15399.33181.253965.389404@guru.mired.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: compact flash cards Message-Id: <20011224193921.9BC8A37B417@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 13:27:25 -0600, Mike Meyer wrote: >Tony Landells types: >> Hi, >> >> I know someone posted some information on accessing Compact Flash >> cards in the last few weeks, but I've been trying for a few days >> to search the mailing list archives and it keeps telling me the >> archive is unavailable. >> >> So I apologise if this is a rehash, but I have some photos to sort >> out before Christmas... >> >> A friend has a compact flash-based camera and a USB flash reader >> (a SanDisk ImageMate SDDR-05a). I can connect the reader to my >> USB port, I can see that it's detected by the USB daemon, but >> I'm not sure where to go from there... > >To your favorite computer dealer, to buy a compact flash disk reader >that works with FreeBSD? i couldn't even that sandisk compact-flash reader to work right with windows.. . --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 13:46:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dot.uber.com.br (ctbcnetsuper-146.xdsl-fixo.ctbcnetsuper.com.br [200.225.201.146]) by hub.freebsd.org (Postfix) with SMTP id D83DE37B416 for ; Mon, 24 Dec 2001 13:46:40 -0800 (PST) Received: (qmail 26217 invoked from network); 24 Dec 2001 19:42:39 -0000 Received: from ctbcnetsuper-016.xdsl-dinamico.ctbcnetsuper.com.br (HELO uber.com.br) (200.225.204.16) by 0 with SMTP; 24 Dec 2001 19:42:39 -0000 Message-ID: <3C27A45A.44750AF6@uber.com.br> Date: Mon, 24 Dec 2001 19:55:39 -0200 From: =?iso-8859-1?Q?Jos=E9?= Romildo Malaquias Organization: UFOP X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.4.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: [newbie] C compiler not finding headers and libs in /usr/local Content-Type: multipart/alternative; boundary="------------EEB8A06DA51E6ACD7490DCFD" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --------------EEB8A06DA51E6ACD7490DCFD Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Hello. I have recently make a fresh install of FreeBSD 4.4 on my PC computer. Although most packages get installed in /usr/local, Surprisingly I have found out that the GNU C compiler is not able, by default, to locate header files in /usr/local/include, and library files in /usr/local/lib. Is this the expected behaviour? What is the best way of fixing it? I noticed the problem when bulding xemacs-21.4.6 yesterday, because its configure script was not able to find the PNG library, although it is there. Regards. Romildo -- Prof. José Romildo Malaquias Departamento de Computação http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto romildo@iceb.ufop.br Brasil romildo@uber.com.br --------------EEB8A06DA51E6ACD7490DCFD Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Hello.

I have recently make a fresh install of FreeBSD 4.4 on my PC computer.
Although most packages get installed in /usr/local, Surprisingly I have
found out that the GNU C compiler is not able, by default, to locate
header files in /usr/local/include, and library files in /usr/local/lib.
Is this the expected behaviour? What is the best way of fixing it?

I noticed the problem when bulding xemacs-21.4.6 yesterday, because
its configure script was not able to find the PNG library, although
it is there.

Regards.

Romildo 

-- 
Prof. José Romildo Malaquias               Departamento de Computação
http://iceb.ufop.br/~romildo       Universidade Federal de Ouro Preto
romildo@iceb.ufop.br                                           Brasil
romildo@uber.com.br
  --------------EEB8A06DA51E6ACD7490DCFD-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 13:50: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtprelay6.dc2.adelphia.net (smtprelay6.dc2.adelphia.net [64.8.50.38]) by hub.freebsd.org (Postfix) with ESMTP id 9F8D237B41A for ; Mon, 24 Dec 2001 13:49:57 -0800 (PST) Received: from there ([63.88.159.67]) by smtprelay6.dc2.adelphia.net (Netscape Messaging Server 4.15) with SMTP id GOVBB700.LGM for ; Mon, 24 Dec 2001 16:49:56 -0500 Content-Type: text/plain; charset="iso-8859-1" X-KMail-Redirect-From: "Gerald A. Speak" Subject: Re: mplayer From: "Gerald A. Speak" (by way of Gerald A. Speak ) Date: Mon, 24 Dec 2001 16:49:55 -0500 To: questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011224214957.9F8D237B41A@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 24 December 2001 01:09 pm, you wrote: > the one I installed (from ports) doesnt come with DVD support... > says something... :DVD support was not compiled in: > > i guess Im out of luck or what? > > Thanks. > > --uwi > mAn Don't give up yet. This time, instead of using just make install, try: make deinstall make install WITH_DVD=yes Other options are listed in the Port's Makefile. Good luck. Gerald To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 14:30: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id E82D137B417 for ; Mon, 24 Dec 2001 14:30:04 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 9733DBCFB; Mon, 24 Dec 2001 14:30:04 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id OAA02297; Mon, 24 Dec 2001 14:30:03 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBOMU8e29401; Mon, 24 Dec 2001 14:30:08 -0800 (PST) (envelope-from swear@blarg.net) To: "111" Cc: Subject: Re: any difference between cable(TV) and phone line high speed internet References: <200112211956.fBLJu1d16378@ptavv.es.net> <01d501c18c93$1a0c9d40$ec41d5cc@daleco> From: swear@blarg.net (Gary W. Swearingen) Date: 24 Dec 2001 14:30:08 -0800 In-Reply-To: <01d501c18c93$1a0c9d40$ec41d5cc@daleco> Message-ID: Lines: 39 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "111" writes: > From: Gary W. Swearingen > Sent: Sunday, December 23, 2001 12:07 PM > Subject: Re: any difference between cable(TV) and phone line high speed > internet > > > > > Well, the interconnect to your desk is not shared, but congestion can > > > occur anyplace other than that and it's all shared from that point. That form of quoting is wasteful and makes it look like I wrote that. I didn't. > Telcos/Cablecos use ATM to guarantee high bandwidth and uptime. Their > modems use PPPoATM (or PPPoE) 'cuz that's what they're set up to do > (IMHO, I may very well be wrong.) I thought that some cable users have to actually use PPPoE-smart software on their computers, whereas the PPPoATM is only in the modem and TELCOM. Anyone know for sure? > >Some ISPs configure the modem as a bridge so it looks to > > your system like one of your ISP's NICs extended to your site. > > > That's basically the way my cable is set up. That's where the > line about 'shared bandwidth' (or 'subnets', below) comes in. I don't think so. I think it was about the bandwidth between your modem and your ISP and whether or not your modem is configured as a router or bridge or is on a subnet is not related. My TELCO could (and might have in some places and times) run a dedicated wire between my "Central Office" (where my modem wire ends) and my ISP. But mine uses an ATM network instead. Either way (as I understand it), they can guarantee bandwidth without "sharing", even when my ISP had me using bridging so my modem looked like one NIC on a subnet. It was on a subnet, but only at my ISP where they have it attached via some high-speed network to the Internet. It's similar for the router-mode modem. With Cable, the line between modems and the cableco equivalent of a Central Office is shared. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 14:32:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id E51E237B405 for ; Mon, 24 Dec 2001 14:32:27 -0800 (PST) Received: from barbish ([63.70.155.122]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Mon, 24 Dec 2001 17:34:35 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: mouse support for Midnight Comander Date: Mon, 24 Dec 2001 17:32:25 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I installed Midnight Commander (IE: Like DOS tree command) running on the machine console as user root. The FAQ say 3.1 How do I enable mouse support? Invoke mc like this (without quotes): "midc -x". If this doesn't work upgrade to a terminal which is compatible with the Xterm mouse sequences. Alternatively, on Linux console you can use gpm. Same results starting with midc -x as with out the -x, mouse does not work. What do I have to do to make the master root console to act like a xterm terminal which is compatible with the Xterm mouse sequences?. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 15:11:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20507.mail.yahoo.com (web20507.mail.yahoo.com [216.136.226.142]) by hub.freebsd.org (Postfix) with SMTP id 354FB37B405 for ; Mon, 24 Dec 2001 15:11:37 -0800 (PST) Message-ID: <20011224231136.76092.qmail@web20507.mail.yahoo.com> Received: from [63.49.151.113] by web20507.mail.yahoo.com via HTTP; Mon, 24 Dec 2001 15:11:36 PST Date: Mon, 24 Dec 2001 15:11:36 -0800 (PST) From: Ben Hacker Jr Subject: Installing JAVA... To: list DC-FBSD Cc: questions FBSD MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, Thanks in advance for any help I can get installing JAVA. My goal is to install StarOffice6.0 The installation program needs Java. I tried to install the port: /usr/ports/java/jdk13 This port at some point tried to install the following: /usr/ports/java/linux-jdk13 It is asking me to go download a file called: j2sdk-1_3_1_01-linux-i386.bin but the only one available at the Sun web site is: j2sdk-1_3_1_02-linux-i386.bin so it won't compile properly. Please... ... ...HELP! Thanks and ... Have a Happy Christ's Birthday!! ===== -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- Ben Hacker Jr Sr. Security Analyst 703.751.3757 2101 Wilson Blvd. Ste: 916 strbenjr@yahoo.com Arlington, VA 22201 -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- -=*=- __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 15:29:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe61.pav2.hotmail.com [64.4.36.195]) by hub.freebsd.org (Postfix) with ESMTP id A65F437B416 for ; Mon, 24 Dec 2001 15:29:16 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 24 Dec 2001 15:29:16 -0800 X-Originating-IP: [216.175.75.63] From: "Jeff Jeter" To: "Mark Woodson" Cc: References: <200112212225.fBLMPmh23934@clunix.cl.msu.edu><5.1.0.14.0.20011221185555.0248b430@127.0.0.1><5.1.0.14.0.20011221221117.0276aa60@127.0.0.1> <5.1.0.14.0.20011224085551.01e028f8@127.0.0.1> Subject: Re: New Disk on IDE card Date: Mon, 24 Dec 2001 06:29:06 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Message-ID: X-OriginalArrivalTime: 24 Dec 2001 23:29:16.0441 (UTC) FILETIME=[CDA77890:01C18CD2] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Well, what I'd recommend since (for whatever reason) sysinstall isn't > newfs'ing the drive that you try doing that yourself. > How do i do it manually? I tried newfs, but it said i need a disklabel. when i run disklabel /dev/ad5(s1)(e) auto. it return an error: "auto: requires the use of canonical disk name" what's that? i could not find disktypes other than auto. Thanks, Jeff Jeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 16: 3: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.unixathome.org (lists.unixathome.org [210.48.103.158]) by hub.freebsd.org (Postfix) with ESMTP id AB67E37B419; Mon, 24 Dec 2001 16:02:37 -0800 (PST) Received: from wocker (lists.unixathome.org [210.48.103.158]) by lists.unixathome.org (8.11.6/8.11.6) with ESMTP id fBP02SC31920; Tue, 25 Dec 2001 13:02:30 +1300 (NZDT) (envelope-from dan@langille.org) From: "Dan Langille" Organization: novice in training To: questions@freebsd.org Date: Mon, 24 Dec 2001 19:02:26 -0500 MIME-Version: 1.0 Subject: autoconf problems stop gimp from installing Reply-To: dan@langille.org Cc: vanilla@freebsd.org Message-ID: <3C277BC2.17110.4A140ABB@localhost> X-mailer: Pegasus Mail for Windows (v4.01) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, Can anyone please tell me why gimp refuses to build to build on one box but builds on another? Both boxes share the same /usr/ports tree via NFS. this box builds: autoconf-2.13.000227, autoconf213-2.13.000227, 4.4- STABLE dated 20 Sep 2001. this box doesn't: autoconf-2.52, autoconf213-2.13.000227, 4.4-STABLE dated 17 Dec 2001 The failure is: cc -DHAVE_CONFIG_H -I. -I. -I. -O -pipe -I/usr/include/ncurses -c aasavefont. c ./libtool --mode=link cc -O -pipe -I/usr/include/ncurses -o aasavefont aasave font.o libaa.la -lncurses -lm cc -O -pipe -I/usr/include/ncurses -o .libs/aasavefont aasavefont.o .libs/libaa. so -lncurses -lm -lncurses -lm -Wl,--rpath -Wl,/usr/local/lib creating aasavefont cd . && autoheader ./aclocal.m4:39: error: m4_defn: undefined macro: _m4_divert_diversion acoldnames.m4:86: AM_PROG_INSTALL is expanded from... ./aclocal.m4:39: the top level autoconf: tracing failed *** Error code 1 Stop in /usr/ports/graphics/aalib/work/aalib-1.2. *** Error code 1 Stop in /usr/ports/graphics/aalib. FWIW, the sucessful box contains aalib-1.2_2 thanks. -- Dan Langille The FreeBSD Diary - http://freebsddiary.org/ - practical examples To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 16:12:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20103.mail.yahoo.com (web20103.mail.yahoo.com [216.136.226.40]) by hub.freebsd.org (Postfix) with SMTP id 1CAB437B41B for ; Mon, 24 Dec 2001 16:12:41 -0800 (PST) Message-ID: <20011225001240.91253.qmail@web20103.mail.yahoo.com> Received: from [24.157.184.37] by web20103.mail.yahoo.com via HTTP; Mon, 24 Dec 2001 16:12:40 PST Date: Mon, 24 Dec 2001 16:12:40 -0800 (PST) From: ann kok Subject: pop To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all I am confusion the following: are they same features? qmail-pop3d, qpopper, procmail are they mutual exclusive in the mail server? Does qmail-pop3d have secure pop? Thank you very much __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 16:59: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fedde.littleton.co.us (cfedde.dsl.frii.net [216.17.139.141]) by hub.freebsd.org (Postfix) with ESMTP id 33E7337B417 for ; Mon, 24 Dec 2001 16:59:07 -0800 (PST) Received: from fedde.littleton.co.us (localhost [127.0.0.1]) by fedde.littleton.co.us (8.11.6/8.11.4) with ESMTP id fBP0wx258549; Mon, 24 Dec 2001 17:58:59 -0700 (MST) Message-Id: <200112250058.fBP0wx258549@fedde.littleton.co.us> To: Fuji Zhang Cc: freebsd-questions@FreeBSD.ORG Subject: Re: any difference between cable(TV) and phone line high speed internet In-Reply-To: From: Chris Fedde Date: Mon, 24 Dec 2001 17:58:59 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 21 Dec 2001 10:21:20 -0500 (EST) Fuji Zhang wrote: +------------------ | Seasons Greetings! does anybody know if there is any difference between | phone line and cable(TV) high speed conncections as far as FreeBSD is | concerned? appreciate your help. +------------------ The main difference are in the "modem" used and the provisioning by the ISP. Most of these differences show up in the details of configuring the modem. Genraly FreeBSD itself does not impact the issue at all except that the ISP will only answer questions for "windows based systems". So if you need to ask FreeBSD questions their tier1 techs might tell you that you are unsupported. Good Luck -- Chris Fedde To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17: 9:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fedde.littleton.co.us (cfedde.dsl.frii.net [216.17.139.141]) by hub.freebsd.org (Postfix) with ESMTP id 8497E37B405 for ; Mon, 24 Dec 2001 17:09:12 -0800 (PST) Received: from fedde.littleton.co.us (localhost [127.0.0.1]) by fedde.littleton.co.us (8.11.6/8.11.4) with ESMTP id fBP19A258599; Mon, 24 Dec 2001 18:09:10 -0700 (MST) Message-Id: <200112250109.fBP19A258599@fedde.littleton.co.us> To: "Florian Perves" Cc: questions@FreeBSD.ORG Subject: Re: processes et jobs In-Reply-To: <003e01c18c8e$beb71a00$063215ac@retis.fr> From: Chris Fedde Date: Mon, 24 Dec 2001 18:09:10 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 16:22:04 +0100 "Florian Perves" wrote: +------------------ | Bonjour, | | je viens de lire le handbook sur freebsd.org, mais je n'ai toujours pas = | de r=E9ponse =E0 cette question : | comment basculer un processus lanc=E9 en arri=E8re plan dans un premier = | shell, en premier plan dans un autre shell. | | merci pour votre aide. +------------------ There is a friench language mailing list at http://www.FreeBSD-fr.org. If I get the gist of your question you might find the answer by reading up on process groups and the ps(1) command. good luck! -- Chris Fedde To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17:19:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 645A337B41B for ; Mon, 24 Dec 2001 17:19:29 -0800 (PST) Received: from barbish ([63.70.155.122]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Mon, 24 Dec 2001 20:21:36 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: disk space usage commands Date: Mon, 24 Dec 2001 20:19:25 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I want to know how full my FBSD hard drive partition is. I used dm -h -l 1 it shows what is used but not what used out of total available. What other commands are available to display disk usage? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17:22: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from linuxmail.touchtunes.com (operator.touchtunes.com [216.94.139.201]) by hub.freebsd.org (Postfix) with ESMTP id 7AE9137B416 for ; Mon, 24 Dec 2001 17:22:05 -0800 (PST) Received: from sunder.touchtunes.com (sunder.touchtunes.com [192.168.0.26]) by linuxmail.touchtunes.com (8.9.3/8.8.7) with ESMTP id UAA16294 for ; Mon, 24 Dec 2001 20:22:04 -0500 Received: (from dinjo@localhost) by sunder.touchtunes.com (8.11.6/8.11.6) id fBP1LJB75873 for freebsd-questions@freebsd.org; Mon, 24 Dec 2001 20:21:19 -0500 (EST) (envelope-from dinjo) Date: Mon, 24 Dec 2001 20:21:19 -0500 From: Joel Dinel To: freebsd-questions@freebsd.org Subject: Re: processes et jobs Message-ID: <20011224202119.A75845@sunder.touchtunes.com> Mail-Followup-To: Joel Dinel , freebsd-questions@freebsd.org References: <003e01c18c8e$beb71a00$063215ac@retis.fr> <200112250109.fBP19A258599@fedde.littleton.co.us> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200112250109.fBP19A258599@fedde.littleton.co.us>; from chris@fedde.littleton.co.us on Mon, Dec 24, 2001 at 06:09:10PM -0700 X-Useless-Header: Look ma, it's a # sign! X-Operating-System: FreeBSD 4.4-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG He wants to know how to start a job in background on one terminal, and bring it back to foreground on another terminal. On Mon, Dec 24, 2001 at 06:09:10PM -0700, Chris Fedde wrote: > To: "Florian Perves" > Cc: questions@FreeBSD.ORG > Subject: Re: processes et jobs > From: Chris Fedde > Date: Mon, 24 Dec 2001 18:09:10 -0700 > > On Mon, 24 Dec 2001 16:22:04 +0100 "Florian Perves" wrote: > +------------------ > | Bonjour, > | > | je viens de lire le handbook sur freebsd.org, mais je n'ai toujours pas = > | de r=E9ponse =E0 cette question : > | comment basculer un processus lanc=E9 en arri=E8re plan dans un premier = > | shell, en premier plan dans un autre shell. > | > | merci pour votre aide. > +------------------ > > There is a friench language mailing list at http://www.FreeBSD-fr.org. > > If I get the gist of your question you might find the answer by > reading up on process groups and the ps(1) command. > > good luck! > > -- > Chris Fedde > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---end quoted text--- -- Joel Dinel TouchTunes Digital Jukebox, Inc. GnuPG key : http://darkhost.mine.nu:81/~joel/mykey.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17:22:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from linuxmail.touchtunes.com (operator.touchtunes.com [216.94.139.201]) by hub.freebsd.org (Postfix) with ESMTP id E9D6237B416 for ; Mon, 24 Dec 2001 17:22:40 -0800 (PST) Received: from sunder.touchtunes.com (sunder.touchtunes.com [192.168.0.26]) by linuxmail.touchtunes.com (8.9.3/8.8.7) with ESMTP id UAA16302; Mon, 24 Dec 2001 20:22:40 -0500 Received: (from dinjo@localhost) by sunder.touchtunes.com (8.11.6/8.11.6) id fBP1Ltp75895; Mon, 24 Dec 2001 20:21:55 -0500 (EST) (envelope-from dinjo) Date: Mon, 24 Dec 2001 20:21:55 -0500 From: Joel Dinel To: Joe & Fhe Barbish Cc: freebsd-questions@freebsd.org Subject: Re: disk space usage commands Message-ID: <20011224202155.B75845@sunder.touchtunes.com> Mail-Followup-To: Joel Dinel , Joe & Fhe Barbish , freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Mon, Dec 24, 2001 at 08:19:25PM -0500 X-Useless-Header: Look ma, it's a # sign! X-Operating-System: FreeBSD 4.4-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Try 'df -h' instead. On Mon, Dec 24, 2001 at 08:19:25PM -0500, Joe & Fhe Barbish wrote: > From: "Joe & Fhe Barbish" > To: "FBSD Questions" > Subject: disk space usage commands > Date: Mon, 24 Dec 2001 20:19:25 -0500 > X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) > > > I want to know how full my FBSD hard drive partition is. > I used dm -h -l 1 it shows what is used but not what used out of total > available. What other commands are available to display disk usage? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---end quoted text--- -- Joel Dinel System Administrator TouchTunes Digital Jukebox, Inc. GnuPG key : http://darkhost.mine.nu:81/~joel/mykey.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17:27: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from europa.ramos.org (rdu163-41-070.nc.rr.com [24.163.41.70]) by hub.freebsd.org (Postfix) with ESMTP id 2020937B405 for ; Mon, 24 Dec 2001 17:27:04 -0800 (PST) Received: (from jdr@localhost) by europa.ramos.org (8.11.6/8.11.6) id fBP1S4G13313 for questions@freebsd.org; Mon, 24 Dec 2001 20:28:04 -0500 (EST) (envelope-from jdr) Date: Mon, 24 Dec 2001 20:28:03 -0500 From: J Ramos To: questions@freebsd.org Subject: IDE CD Writer Question Message-ID: <20011224202803.A13296@europa.ramos.org> Reply-To: jramos2@nc.rr.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sorry for asking a probably beaten to death question, but the mailing list archives keep coming up as unavailable. Is there anything to use to write data and music CD's to an IDE burner under FreeBSD? I used xcdroast under Linux previously, but I don't use Linux anymore. cdrecord -scanbus returns errors, and xcdroast can't scan the bus either, no surprise there... Thanks for any help you could offer, Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 17:40:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.mediadesign.nl (md2.mediadesign.nl [212.19.205.67]) by hub.freebsd.org (Postfix) with SMTP id EBC0F37B416 for ; Mon, 24 Dec 2001 17:40:13 -0800 (PST) Received: (qmail 15817 invoked by uid 1002); 25 Dec 2001 01:40:02 -0000 From: "Alson van der Meulen" Date: Tue, 25 Dec 2001 02:40:02 +0100 To: questions@freebsd.org Subject: Re: IDE CD Writer Question Message-ID: <20011225024002.C11140@alm.xs4all.nl> Mail-Followup-To: questions@freebsd.org References: <20011224202803.A13296@europa.ramos.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011224202803.A13296@europa.ramos.org> User-Agent: Mutt/1.3.23i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG J Ramos(jramos2@nc.rr.com)@2001.12.24 20:28:03 +0000: > Sorry for asking a probably beaten to death question, but the mailing list > archives keep coming up as unavailable. Is there anything to use to write > data and music CD's to an IDE burner under FreeBSD? I used xcdroast under > Linux previously, but I don't use Linux anymore. cdrecord -scanbus returns > errors, and xcdroast can't scan the bus either, no surprise there... man 8 burncd To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 18:24:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.knology.net (user-24-214-63-13.knology.net [24.214.63.13]) by hub.freebsd.org (Postfix) with SMTP id CB5E537B416 for ; Mon, 24 Dec 2001 18:24:12 -0800 (PST) Received: (qmail 21544 invoked from network); 25 Dec 2001 02:23:56 -0000 Received: from user-24-214-92-93.knology.net (HELO grumpy.dyndns.org) (24.214.92.93) by user-24-214-63-13.knology.net with SMTP; 25 Dec 2001 02:23:56 -0000 Received: from localhost (localhost [127.0.0.1]) by grumpy.dyndns.org (8.11.6/8.11.6) with ESMTP id fBP2NjU37711; Mon, 24 Dec 2001 20:23:45 -0600 (CST) (envelope-from dkelly@grumpy.dyndns.org) Message-Id: <200112250223.fBP2NjU37711@grumpy.dyndns.org> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: Martin Schweizer Cc: freebsd-questions@FreeBSD.ORG From: David Kelly Subject: Re: ipfw & ftp In-reply-to: Message from Martin Schweizer of "Mon, 24 Dec 2001 09:51:43 +0100." <20011224095143.B318@spectraweb.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Date: Mon, 24 Dec 2001 20:23:45 -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Martin Schweizer writes: > Hello Darryl > = > I attached you my rc.firewall. I found a solution with passive and acti= ve ftp The flip side of "passive ftp" is "non-passive ftp". Is not really ftp = that is being passive but its "ftp for passive firewalls who don't know = the ftp protocol." [...] > ipfw add allow tcp from any 20 to me 1024-49151 keep-state # aktives FT= P > ipfw add allow tcp from any 20 to 192.168.1.1/24 1024-49151 keep-state So all I have to do to probe you with impunity is to source my probes = from port 20. Looking at my ipfw logs your rule would let about 1 in 50 = probes past. But then again you are running ftpd and intend outside = connections to come in but the above firewall rule opens everything = else. For outgoing connections I have found the punch_fw option of natd works = perfectly for non-passive ftp but doesn't detect passive outgoing = connections. -- = David Kelly N4HHE, dkelly@hiwaay.net =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 19:15:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id C579D37B41A for ; Mon, 24 Dec 2001 19:15:37 -0800 (PST) Received: from barbish ([63.70.155.122]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Mon, 24 Dec 2001 22:17:45 -0500 From: "Joe & Fhe Barbish" To: "Lowell Gilbert" Cc: "FBSD Questions" Subject: RE: [freebsd-questions] mouse support for Midnight Comander Date: Mon, 24 Dec 2001 22:15:35 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <44lmfs9fpx.fsf@lowellg.ne.mediaone.net> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yes mouse is in the rc.conf. any more ideas? -----Original Message----- From: lowell@be-well.no-ip.com [mailto:lowell@be-well.no-ip.com]On Behalf Of Lowell Gilbert Sent: Monday, December 24, 2001 9:49 PM To: "Joe & Fhe Barbish" Subject: Re: [freebsd-questions] mouse support for Midnight Comander barbish@a1poweruser.com ("Joe & Fhe Barbish") writes: > I installed Midnight Commander (IE: Like DOS tree command) running on the > machine console as user root. > The FAQ say > 3.1 How do I enable mouse support? > Invoke mc like this (without quotes): "midc -x". If this doesn't work > upgrade to a terminal which is compatible with the Xterm mouse sequences. > Alternatively, on Linux console you can use gpm. > Same results starting with midc -x as with out the -x, mouse does not work. > What do I have to do to make the master root console to act like a xterm > terminal > which is compatible with the Xterm mouse sequences?. Are you running moused? I would guess you'd need to. There's a hook in rc.conf(5) for enabling it automatically at boot. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 19:37:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cx2037703-a.kenner1.la.home.com (cx2037703-a.kenner1.la.home.com [24.39.27.145]) by hub.freebsd.org (Postfix) with ESMTP id B0E5A37B417 for ; Mon, 24 Dec 2001 19:37:45 -0800 (PST) Received: (from conrads@localhost) by cx2037703-a.kenner1.la.home.com (8.11.6/8.11.6) id fBP3amU71082; Mon, 24 Dec 2001 21:36:48 -0600 (CST) (envelope-from conrads) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <3C27A45A.44750AF6@uber.com.br> Date: Mon, 24 Dec 2001 21:36:48 -0600 (CST) Organization: @Home Network From: Conrad Sabatier To: =?iso-8859-1?Q?Jos=E9?= Romildo Malaquias Subject: Re: [newbie] C compiler not finding headers and libs in /usr/loc Cc: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 24-Dec-2001 José Romildo Malaquias wrote: > Hello. > > I have recently make a fresh install of FreeBSD 4.4 on my PC computer. > Although most packages get installed in /usr/local, Surprisingly I have > found out that the GNU C compiler is not able, by default, to locate > header files in /usr/local/include, and library files in /usr/local/lib. No, the C compiler doesn't look for includes under /usr/local by default, and it shouldn't. > Is this the expected behaviour? What is the best way of fixing it? Yes, this is the correct and expected behavior. There's really nothing to "fix" per se. If you mean "how can I get the compiler to use includes under /usr/local", then all you need is to add some "-I/usr/local/include" switches in your Makefiles. > I noticed the problem when bulding xemacs-21.4.6 yesterday, because > its configure script was not able to find the PNG library, although > it is there. Are you using the ports collection to do this, or building it yourself? If you haven't tried using the ports, do yourself a favor and learn what they're all about. -- Conrad Sabatier The sum of the Universe is zero. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 19:42:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by hub.freebsd.org (Postfix) with ESMTP id 4CDB237B419 for ; Mon, 24 Dec 2001 19:42:56 -0800 (PST) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.10.2+Sun/8.10.2) id fBP3gsj05646; Mon, 24 Dec 2001 22:42:54 -0500 (EST) From: Jerry McAllister Message-Id: <200112250342.fBP3gsj05646@clunix.cl.msu.edu> Subject: Re: New Disk on IDE card To: gsfgf@hotmail.com (Jeff Jeter) Date: Mon, 24 Dec 2001 22:42:54 -0500 (EST) Cc: freebsd-questions@freebsd.org In-Reply-To: from "Jeff Jeter" at Dec 24, 2001 06:29:06 AM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > > Well, what I'd recommend since (for whatever reason) sysinstall isn't > > newfs'ing the drive that you try doing that yourself. > > > How do i do it manually? I tried newfs, but it said i need a disklabel. > when i run disklabel /dev/ad5(s1)(e) auto. it return an error: "auto: > requires the use of canonical disk name" > > what's that? i could not find disktypes other than auto. It wants you to skip the /dev/ path part and just use the ad5 under those circumstances. It probably could figure it out itself, but apparently didn't get written that way. ////jerry > > Thanks, > Jeff Jeter > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 20: 3:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-ft3.fr.colt.net (smtp-ft3.fr.colt.net [213.41.78.27]) by hub.freebsd.org (Postfix) with ESMTP id 716FE37B416 for ; Mon, 24 Dec 2001 20:03:28 -0800 (PST) Received: from user (host.130.97.23.62.rev.coltfrance.com [62.23.97.130]) by smtp-ft3.fr.colt.net with SMTP id fBP4AhL27669; Tue, 25 Dec 2001 05:10:45 +0100 Message-Id: <200112250410.fBP4AhL27669@smtp-ft3.fr.colt.net> From: ma1il@oag.state.va.us To: Subject: Cable Tv Information Date: Mon, 24 Dec 2001 21:31:30 -0600 X-Priority: 3 X-MSMail-Priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG NOTE: THIS IS AN ADVERTISEMENT FOR LEGAL TV DE-SCRAMBLER. IF YOU HAVE NO INTEREST IN THIS INFORMATION PLEASE CLICK DELETE NOW. THANK YOU-- LEGAL CABLE TV DE-SCRAMBLER Want to watch Sporting Events?--Movies?--Pay-Per-View?? You can assemble from electronic store parts for about $12.00. We Send You: E-Z To follow Assembly Instructions E-Z To read Original Drawings. Electronic parts lists. PLUS SOMETHING NEW YOU MUST HAVE! Something you can't do without. THE UP-TO-DATE REPORT: USING A DESCRAMBLER LEGALLY Warning: You should not build a TV Descrambler without reading this report first. Frequently Asked Questions--CABLE TV DESCRAMBLER Q: Will the descrambler work on Fiber, TCI, Jarrod A: The answer is YES. Q: Do I need a converter box? A: This plan works with or without a converter box. Specific instructions are included in the plans for each! Q: Can the cable company detect that I have the descrambler? A: No, the signal descrambles right at the box and does not move back through the line! Q: Do I have to alter my existing cable system, television or VCR? A: The answer is no! Q: Does this work with my remote control? A: The answer is yes. The descrambler is manually controlled--but very easy to use! Q: Can you email me the plans? A: No the program comes with an easy to follow picture guide. Q: Does this work everywhere across the country? A: Yes, every where in the USA plus England, Brazil, Canada and other countries! Q: Is this deal guaranteed? A: Yes, if you are unhappy for any reason we will refund your money. ORDER INFORMATION ACT WITHIN THE NEXT 7 DAYS AND RECEIVE TWO FREE BONUS!! THE CABLE MANUAL! This manual contains hard to find information your cable company does not want you to know. Also receive The RADAR JAMMER PLANS! Never get another speeding ticket. Build you own radar jammer, this unit will jam police radar so they can't get a reading on your vechicle. Radar jammers are legal in 48 states. It is simple to build. The FREE BONUSES ALONE ARE WORTH ACTING NOW! THE CABLE DESCRAMBLER KIT COMES WITH A THIRTY DAY MONEY BACK GUARANTEE! IF YOUR NOT COMPLETELY SATISFIED, SEND THE CABLE DESCRAMBLER KIT BACK AND YOU KEEP THE BONUSES FOR FREE. YOU HAVE NOTHING TO LOSE!! ACT NOW AND SAVE!! SIMPLY SEND $12.95, THAT'S ONLY $12.95 BUT YOU MUST ORDER WITHIN 7 DAYS FOR THIS SPECIAL PRICE!!! SEND $12.95 CHECK OR, MONEY ORDER, OR CREDIT CARD INFORMATION TO: INFO PLUS PO BOX 9889 PANAMA CITY BEACH, FL 32417 FOR CREDIT CARD ORDERS FILL OUT THIS FORM AND MAIL IN ATTENTION INFO PLUS, here is my credit card information for the amount of $12.95 for the cable descrambler kit. ACCOUNT NUMBER____________________________________ EXP. DATE____________________ NAME_____________________________________________ BILLING ADDRESS__________________________________________ CITY/STATE/ZIP_____________________________________ HOME PHONE__________________________________ THIS INFORMATION IS SOLD FOR EDUCATIONAL PURPOSES ONLY This mailing is done by an independent marketing co. We apologize if this message has reached you in error Save the Planet, Save the Trees! Advertise via E mail. No wasted paper! Delete with one simple keystroke! Less refuse in our Dumps! This is the new way of the new millennium! If you would like to be removed steinbuck37@yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 20:18: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.3dresearch.com (kundera.3dresearch.com [209.195.180.8]) by hub.freebsd.org (Postfix) with ESMTP id 2BE6E37B419 for ; Mon, 24 Dec 2001 20:18:07 -0800 (PST) Received: from bosch.3dresearch.com (bosch.3dresearch.com [209.195.180.12]) by smtp.3dresearch.com (Postfix) with ESMTP id B1DDE7EB for ; Mon, 24 Dec 2001 23:17:54 -0500 (EST) Message-Id: <5.1.0.14.0.20011224230328.03d0ad48@imap.3dresearch.com> X-Sender: janos@imap.3dresearch.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 24 Dec 2001 23:17:52 -0500 To: freebsd-questions@freebsd.org From: web@3dresearch.com Subject: /usr/ports/ftp/wget make install error Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have attempted to install wget and I get this error message: /usr/ports/ftp/wget]# make install ===> Building for wget-1.7_3 cd src && gmake CC='cc' CPPFLAGS='' DEFS='-DHAVE_CONFIG_H -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" -DLOCALEDIR=\"/usr/local/share/locale\"' CFLAGS='-DINET6 -DINET6 -O -pipe ' LDFLAGS='-L/usr/lib -R/usr/lib ' LIBS='-lintl -lssl -lcrypto ' prefix='/usr/local' exec_prefix='/usr/local' bindir='/usr/local/bin' infodir='/usr/local/info' mandir='/usr/local/man' manext='1' gmake[1]: Entering directory `/usr/ports/ftp/wget/work/wget-1.7/src' cc -I. -I. -I/usr/include -DHAVE_CONFIG_H -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" -DLOCALEDIR=\"/usr/local/share/locale\" -DINET6 -DINET6 -O -pipe -c cmpt.c In file included from cmpt.c:36: wget.h:44: libintl.h: No such file or directory gmake[1]: *** [cmpt.o] Error 1 gmake[1]: Leaving directory `/usr/ports/ftp/wget/work/wget-1.7/src' gmake: *** [src] Error 2 *** Error code 2 Stop in /usr/ports/ftp/wget. *** Error code 1 Stop in /usr/ports/ftp/wget. *** Error code 1 Stop in /usr/ports/ftp/wget. *** Error code 1 Stop in /usr/ports/ftp/wget. The weird thing is that I do have /usr/local/include/libintl.h - so I don't understand what is this error message about. Thanks for any suggestions... Janos Dohanics To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 20:58:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe30.pav2.hotmail.com [64.4.36.87]) by hub.freebsd.org (Postfix) with ESMTP id ABBA037B41B for ; Mon, 24 Dec 2001 20:58:25 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 24 Dec 2001 20:58:20 -0800 X-Originating-IP: [216.175.78.104] From: "Jeff Jeter" To: Subject: Re: New Disk on IDE card Date: Mon, 24 Dec 2001 11:58:24 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0031_01C18C72.4A4571B0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Message-ID: X-OriginalArrivalTime: 25 Dec 2001 04:58:20.0648 (UTC) FILETIME=[C61E5E80:01C18D00] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0031_01C18C72.4A4571B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable OK. I ran "disklabel -w ad5s1" auto and now i am now running "newfs ad5s1(e)" and it returns '1' (or 'e' if present) partition is = unavailable. Sorry sbout needing step-by-step help, the nam pages are confusing. Thanks, Jeff Jeter ------=_NextPart_000_0031_01C18C72.4A4571B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
OK. I ran "disklabel -w ad5s1" auto and = now i am=20 now running "newfs
ad5s1(e)"  and it returns '1' (or 'e' if = present)=20 partition is unavailable.
Sorry sbout needing step-by-step help, the = nam=20 pages are confusing.

Thanks,
Jeff = Jeter
------=_NextPart_000_0031_01C18C72.4A4571B0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 21:15:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 8FCA337B41B for ; Mon, 24 Dec 2001 21:15:09 -0800 (PST) Received: from sdn-ar-001flnaplp242.dialsprint.net ([168.191.88.132] helo=gohan.cjclark.org) by hawk.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16IjvM-00000C-00; Mon, 24 Dec 2001 21:14:48 -0800 Received: (from cjc@localhost) by gohan.cjclark.org (8.11.6/8.11.1) id fBOHRdw00188; Mon, 24 Dec 2001 12:27:39 -0500 (EST) (envelope-from cjc) Date: Mon, 24 Dec 2001 12:27:38 -0500 From: "Crist J. Clark" To: Axel Scheepers Cc: questions@FreeBSD.ORG Subject: Re: 4.4-STABLE /usr/local/etc/rc.d doesn't start at boot time ? Message-ID: <20011224122738.A133@gohan.cjclark.org> Reply-To: cjclark@alum.mit.edu References: <20011206173325.A59605@mars.thuis> <20011206170908.L8975@blossom.cjclark.org> <20011208145954.B97115@mars.thuis> <20011208121138.A22383@blossom.cjclark.org> <20011222143831.A1512@mars.thuis> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011222143831.A1512@mars.thuis>; from axel@axel.truedestiny.net on Sat, Dec 22, 2001 at 02:38:31PM +0100 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 22, 2001 at 02:38:31PM +0100, Axel Scheepers wrote: > On Sat, Dec 08, 2001 at 12:11:38PM -0800, Crist J . Clark wrote: > > > > But the more likely cause, did you run mergemaster(8) or update /etc > > > > manually? If you updated /etc/rc without updating > > > > /etc/defaults/rc.conf, your script startup will be broken. > > > I'm guessing the problem is with "$script_name_sep," but I would > > advise updating /etc/defaults/rc.conf as a whole rather than a > > band-aid fix in /etc/rc.conf. > > Hi Crist, > > I ran mergemaster and did an update of almost all scripts I hadn't changed, > including /etc/defaults/rc.conf and /etc/rc > I rebooted the server a minute ago, but the few scripts in /usr/local/etc/rc.d > are still not being started. > I'm going to look for the "$script_name_sep" which you pointed out before > to see what's the problem. Do you have any clues about why they still won't > start ? (I did let mergemaster copy the updated ones over the old ones; i > didn't merge them so that should be ok) It's hard to say with the information we have what might be wrong. The best advice I can come up with is double-check everything one more time, and if you don't see the problem, try some more debugging: Try the following, $ awk '/awk '/^case \${local_startup/ { go = 1 } go == 1 { print } /^esac/ { go = 0 }' /etc/rc > /tmp/rc.startup $ sh -x $ . /etc/defaults/rc.conf $ . /etc/rc.conf $ . /tmp/rc.startup And see what is going on. These commands are going to be a bit spammy, and watch out if you actually try them as root. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 21:47: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f71.law15.hotmail.com [64.4.23.71]) by hub.freebsd.org (Postfix) with ESMTP id E981937B405 for ; Mon, 24 Dec 2001 21:47:06 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 24 Dec 2001 21:47:06 -0800 Received: from 64.180.40.214 by lw15fd.law15.hotmail.msn.com with HTTP; Tue, 25 Dec 2001 05:47:06 GMT X-Originating-IP: [64.180.40.214] From: "Paul Sue" To: freebsd-questions@FreeBSD.ORG Subject: Re: (SOLVED!): GRUB problems (dual-boot FreeBSD + Mandrake) Date: Mon, 24 Dec 2001 21:47:06 -0800 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Dec 2001 05:47:06.0745 (UTC) FILETIME=[96355690:01C18D07] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >My FreeBSD lines are now >title FreeBSD 4.4. Stable >root (hd1, a) >kernel /boot/loader That's it!! Now it works. Thanks to everyone who responded. My next problem is to get X working -- but I'll get to that in the new year as I'm headed off on vacation. Happy holidays everyone! Paul _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Dec 24 23:18:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 70EEE37B419 for ; Mon, 24 Dec 2001 23:18:26 -0800 (PST) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id 004462B70F; Tue, 25 Dec 2001 08:18:22 +0100 (CET) Received: by k7.mavetju.org (Postfix, from userid 1001) id 552E56CE; Tue, 25 Dec 2001 18:18:20 +1100 (EST) Date: Tue, 25 Dec 2001 18:18:20 +1100 From: Edwin Groothuis To: web@3dresearch.com Cc: freebsd-questions@freebsd.org Subject: Re: /usr/ports/ftp/wget make install error Message-ID: <20011225181820.A90114@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , web@3dresearch.com, freebsd-questions@freebsd.org References: <5.1.0.14.0.20011224230328.03d0ad48@imap.3dresearch.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <5.1.0.14.0.20011224230328.03d0ad48@imap.3dresearch.com>; from web@3dresearch.com on Mon, Dec 24, 2001 at 11:17:52PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 11:17:52PM -0500, web@3dresearch.com wrote: > I have attempted to install wget and I get this error message: > > /usr/ports/ftp/wget]# make install > ===> Building for wget-1.7_3 > cd src && gmake CC='cc' CPPFLAGS='' DEFS='-DHAVE_CONFIG_H > -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" > -DLOCALEDIR=\"/usr/local/share/locale\"' CFLAGS='-DINET6 -DINET6 -O -pipe ' > LDFLAGS='-L/usr/lib -R/usr/lib ' LIBS='-lintl -lssl -lcrypto ' > prefix='/usr/local' exec_prefix='/usr/local' bindir='/usr/local/bin' > infodir='/usr/local/info' mandir='/usr/local/man' manext='1' > gmake[1]: Entering directory `/usr/ports/ftp/wget/work/wget-1.7/src' > cc -I. -I. -I/usr/include -DHAVE_CONFIG_H > -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" > -DLOCALEDIR=\"/usr/local/share/locale\" -DINET6 -DINET6 -O -pipe -c cmpt.c > In file included from cmpt.c:36: > wget.h:44: libintl.h: No such file or directory > gmake[1]: *** [cmpt.o] Error 1 > gmake[1]: Leaving directory `/usr/ports/ftp/wget/work/wget-1.7/src' > gmake: *** [src] Error 2 > *** Error code 2 Please update your CVS tree, the current version is wget-1.8_2. Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: ------------------+ http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 0:46:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.mem.interq.net (smtp01.mem.interq.net [210.157.1.51]) by hub.freebsd.org (Postfix) with ESMTP id 818F137B420 for ; Tue, 25 Dec 2001 00:46:40 -0800 (PST) Received: from 21 ([211.99.167.20]) by smtp01.mem.interq.net (8.9.3/8.9.1) with SMTP id RAA01724 for ; Tue, 25 Dec 2001 17:46:37 +0900 (JST) Message-Id: <200112250846.RAA01724@smtp01.mem.interq.net> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit Date: Tue, 25 Dec 2001 17:47:00 +0900 Subject: =?ISO-2022-JP?B?GyRCJU0lQyVIJTclZyVDJVclRiVKJXMlSEpnPTgbKEI=?= From: E-mise To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG $B%$%s%?!<%M%C%H$,(B24$B;~4V$*6b$r2T$0!*(B $B3Z$7$_$J$,$iBg@.8y$bL4$8$c$J$$!#(B %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% $B%$%s%?!<%M%C%H%7%g%C%W%F%J%s%HJg=8(B %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% $B$*@57n4|4V8BDj2A3J(B 2001$BG/(B12$B7n(B30$B!<(B2002$BG/(B1$B7n(B10$BF|(B $B?=9~$_$rD:$$$?J}$OG/4V;HMQNA(B3$BK|1_$N=j(B1$BK|(B5$B@i1_$N$4Ds6!CW$7$^$9!#(B $B?=9~$@$1$G%7%g%C%W40@.!*(B $BJ]>Z6b!&8"Mx6b!&%m%$%d%j%F%#ITMW(B $B%$%s%?!<%M%C%HCN<1MW$j$^$;$s(B $B%5!<%P!<%l%s%?%k!&#H#P:n@.$OMW$j$^$;$s!#(B $B>/$J$$%j%9%/$G<+J,$N#E%7%g%C%W$r;}$A(B $B$*?=$79~$_8e!"$9$0$KMxMQ$G$-$k(B $B$47@Ls8e$K#H#P%"%I%l%9!"4IM}&IJEPO?$dJQ99$OA4$F%V%i%&%6>e$G9T$($^$9!#(B $B%$%s%?!<%M%C%H%7%g%C%W$KI,MW$J5!G=$,4^$^$l$^$9!#(B $B%i%s%K%s%0%3%9%H$NIiC4$r7Z8:$$$?$7$^$9!#(B $B%*%j%8%J%k$N%Z!<%8$d%"%$%3%s$K$bAH$_9g$o$;2DG=!#(B $B%P%j%(!<%7%g%sK-$+$J%7%g%C%W$,:n@.$G$-$^$9!#(B $B>&IJEPO??t$O:GBgL5@)8B(B 1$B>&IJ$K$D$-:GBg(B3$BKg$^$G>&IJ2hA|$r\$7$/J@; Tue, 25 Dec 2001 02:53:27 -0800 (PST) Message-ID: <20011225105326.50305.qmail@web11101.mail.yahoo.com> Received: from [207.14.67.182] by web11101.mail.yahoo.com via HTTP; Tue, 25 Dec 2001 02:53:26 PST Date: Tue, 25 Dec 2001 02:53:26 -0800 (PST) From: Farmer Ted Subject: Merry Christmas to all, and to all a good site? To: pr@kana.com MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear yahoo contributor, I would like to say this before I get to the reason I am sending this email. I think that yahoo.com is the most versitile search engine/homepage on the internet today. I have had the site as my homepage from the first day I started using the internet years ago, and I have no plans to change that as of right now. The only reason this email is going to this address is because I had a very hard time finding a "suggestions for yahoo" section on their site. I decided it might get some attention this way. That said, I will get to the point. I feel that too many sites start out with good ideas and a good format, get very popular, and then get greedy or "commercial". I really like the services that yahoo provides for virtually free. I do feel that yahoo has started to loose some of it's fans among the people I talk to. I do not want this to happen because of something most people have learned to deal with until it's common practice, at which time some lower class search engine tries to steal the fame with a "are you tired of pop-ups" slogan. ______________________________________________ The following is an email I wrote to send to yahoo. When I went to their site I only found a couple email addresses to send it to, and those weren't really to someone in the suggestion field. Please feel free to forward this to anyone from yahoo.com to whom this concerns. ______________________________________________ Merry Christmas to all, and to all a good site? (subject) To whom it may concern: I realize that a web site, such as yahoo.com, that is well maintained and is ever-expanding must spend a considerable amount of money, and it has every right to make a profit. Being Christmas Eve, I spent a nice evening with my whole family tonight. This is a rare thing about 360 days of the year in today's competitive world. I turned on my pc to say merry christmas to my friends online. I open a instant messenger and I have one of those annoying but now accepted messages from someone I never have talked to before that contains a url to a website. I went to the site and was instantly a pop up window gone insane victim. I felt this was a great christmas gift from a stranger. I thought it was only right I should return the thought. I went to my homepage, the one I have always had as homepage(yahoo), and do a search on morals for a good site to url them. Well I get a pop up advertisement. I may be just ranting a little, but I think that pop up windows are such a disgrace to the reason the internet was established. I have always been a supporter of yahoo.com, and still will be. I always tell friends to "go to yahoo and search for___". When I seen the first pop up from yahoo a few months back I remember thinking to myself "I never thought a site like yahoo would use a pop up" and shaking my head in disappointment. watcherrules@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 3: 8:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 359C837B417 for ; Tue, 25 Dec 2001 03:08:25 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWCE101.MPR for ; Tue, 25 Dec 2001 12:10:49 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWC3D00.72Y for ; Tue, 25 Dec 2001 12:04:25 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPBBDb33974 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 12:11:13 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 12:11:13 +0100 From: Julio Merino To: freebsd-questions@freebsd.org Subject: portupgrade and XFree86-4 Message-ID: <20011225121113.A33958@klamath.local> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="LZvS9be/3tNcYl/X" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --LZvS9be/3tNcYl/X Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all I've installed XFree86 4.1 from the x11/XFree86-4 port. I've started playing with portupgrade, and wow! it is wonderful! :) But there is something that annoys me. Everytime I do a portinstall of a port that depends on X, it registers dependancies to imake and XFree86-4-libraries. Then, I've to run 'pkgdb -F' to correct these dependancies by hand, and I make them to point to XFree86-4. Is it there any way to do this automagically? Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --LZvS9be/3tNcYl/X Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KF7Rzz00ZOPKycwRAt7HAJ0c2zJ0Luu44XO1mwxR9N/vuQ9HAQCghbcm 8lps1EFtnJ73HAEyE6rUOpw= =ScsJ -----END PGP SIGNATURE----- --LZvS9be/3tNcYl/X-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 4:13:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ws1-9.us4.outblaze.com (205-158-62-55.outblaze.com [205.158.62.55]) by hub.freebsd.org (Postfix) with SMTP id B957B37B417 for ; Tue, 25 Dec 2001 04:13:26 -0800 (PST) Received: (qmail 86506 invoked by uid 1001); 25 Dec 2001 12:13:26 -0000 Message-ID: <20011225121326.86505.qmail@mail.com> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) Received: from ws1-3.us4.outblaze.com for [192.168.0.5, 64.110.183.244] via web-mailer on Tue, 25 Dec 2001 15:13:26 +0300 From: "King Kassle" To: freebsd-questions@FreeBSD.ORG Date: Tue, 25 Dec 2001 15:13:26 +0300 Subject: Dial-Up Using KPPP Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How to dial up using kppp without become root, what files which i must change the permision ? Umm, that's all thank you [kassle] -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 4:22:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id DB57637B405 for ; Tue, 25 Dec 2001 04:22:37 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWFTQ02.HTR for ; Tue, 25 Dec 2001 13:25:02 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWFJ300.E3S for ; Tue, 25 Dec 2001 13:18:39 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPCPMp25828 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 13:25:22 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 13:25:22 +0100 From: Julio Merino To: freebsd-questions@freebsd.org Subject: Fsck'ing ext2 Message-ID: <20011225132522.A19373@klamath.local> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="pWyiEgJYm5f9v55/" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --pWyiEgJYm5f9v55/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all my /home partition is using an ext2 filesystem. I've added it to FreeBSD's /etc/fstab file to use it, and works fine: /dev/ad0s9 /home ext2fs rw 0 0 The problem is the last 0. If my computer goes down (power failure, for example), FreeBSD is not able to boot up later on its own because this partition is not clean. I installed the e2fsprogs port, but that fsck does not seem to work... Is it possible to allow FreeBSD fsck ext2 partitions? Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --pWyiEgJYm5f9v55/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KHAyzz00ZOPKycwRAsfZAJ9b+zr59g9OlEy6lglOYFLcWFJFogCeKhC0 p1G945GOMv1vUNGwvdZfab4= =x486 -----END PGP SIGNATURE----- --pWyiEgJYm5f9v55/-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 4:30:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gamma.root-servers.ch (gamma.root-servers.ch [195.49.62.126]) by hub.freebsd.org (Postfix) with SMTP id 0AB0137B419 for ; Tue, 25 Dec 2001 04:30:33 -0800 (PST) Received: (qmail 12459 invoked from network); 25 Dec 2001 12:30:30 -0000 Received: from dclient217-162-128-224.hispeed.ch (HELO athlon550) (217.162.128.224) by 0 with SMTP; 25 Dec 2001 12:30:30 -0000 Date: Tue, 25 Dec 2001 13:31:36 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.53bis) Educational Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <138159723199.20011225133136@buz.ch> To: questions@freebsd.org Subject: FreeBSD 4.4 RELEASE and Highpoint 370 IDE RAID MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hello, I'm currently messing around with a HPT 370 based IDE RAID card on FreeBSD 4.4 RELEASE and wanted to try what's going to happen if one disk breaks down and so I disconnected it from power during a make installworld run and while I expected the system to run like it should, it stopped dumped some error messages on the console, among them that it can't write to ad6 (the disk I took down was ad6) and that ar0 has broken subdisks. But after that, I couldn't even get hit Ctrl-Alt-Del on the console to reboot the system and had to hard reset it to get it back to life.... What's wrong here? Personally, I expect a RAID 1 configuration to survive the failure of one disk and to work until I decide to have time to replace the disk and not just hang until somebody hits reset. Is this the fault of FreeBSD or of the Highpoint chipset (I can't check as I haven't got a Promise based card near me)? Best regards, Gabriel J -----BEGIN PGP SIGNATURE----- Version: PGP 6.5i iQEVAwUBPChjnMZa2WpymlDxAQF7kwf/TXaAFDbQM/FDQEqv3joRVgC6u1PoslJa p6qMvcd/Bug75Y+d/hJjQopjqIGGuJKp4QUXdXfAoS97ZQfzczNvjMfzFmEmdGlk J6xrLL1EibS+yCDKlaxgnjSJoUPuM3LhaQG3fw3kLppZbnCmeyzC+aRwcmiAdO/J cByrWbmktAE65R5YcxlASJPQg+nYKdC5sJkrV6AP8RQ8ZwStOVFx/PL3RWfSdkr5 f6LrkaqjywQMqW0SWcLS/s3E19H430YllQ6cPgGAOdSSSRJMnRz/8zO4OcukRSft SKDPw+I6yay6kpcMnN5BdnOxWBAklUizRCwAU9OHONf3An+CXU3ZrA== =W8ig -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 4:39:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from primus.vsservices.com (primus.vsservices.com [63.66.136.75]) by hub.freebsd.org (Postfix) with ESMTP id 2738F37B417 for ; Tue, 25 Dec 2001 04:39:17 -0800 (PST) Received: from prime.vsservices.com (conr-adsl-dhcp-26-38.txucom.net [209.34.26.38]) by primus.vsservices.com (8.11.3/8.11.3) with SMTP id fBODqZB50378; Mon, 24 Dec 2001 05:52:36 -0800 (PST) (envelope-from gclarkii@vsservices.com) Content-Type: text/plain; charset="iso-8859-1" From: GB Clark II To: , Subject: Re: shared object "libc.so.6" not found Date: Mon, 24 Dec 2001 07:52:37 -0600 X-Mailer: KMail [version 1.2] References: <160c901c18c6c$06464670$2900740a@cableone.net> In-Reply-To: <160c901c18c6c$06464670$2900740a@cableone.net> MIME-Version: 1.0 Message-Id: <0112240752370P.65128@prime.vsservices.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 24 December 2001 05:13, dennyboy@cableone.net wrote: > had installed netscape, the bsd version, since > the linux version never worked due to not being > able to find the lib files it needed. Same story > with the bsd version. Tried copying libXt.so.6 > & libXtst.so.6.1 to several lib directories and > then creating the soft links, but it still would > not work. After rebooting & attempting to startx, > got the following message: > /usr/libexec/ld-elf.so.1: Shared object "libc.so.6" > not found. > Can someone tell me how to fix this? I hate to do > a complete reinstall. Everything else is working > fine. Thanks. > That almost has to be a Linux binary. Last time I checked, FreeBSD does not have a version 6 libc. GB -- GB Clark II | Roaming FreeBSD Admin gclarkii@VSServices.COM | General Geek CTHULU for President - Why choose the lesser of two evils? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 5:20:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from info.beeline.samara.ru (info.beeline.samara.ru [195.128.141.20]) by hub.freebsd.org (Postfix) with ESMTP id EC12937B417 for ; Tue, 25 Dec 2001 05:20:07 -0800 (PST) Received: from opr2.bee ([195.128.147.241]) by info.beeline.samara.ru (8.9.2/8.9.2) with SMTP id RAA46483 for ; Tue, 25 Dec 2001 17:20:00 +0400 (SAMT) (envelope-from vano@beeline.samara.ru) From: "Ivan" To: Subject: Date: Tue, 25 Dec 2001 17:20:56 +0400 Message-ID: <01c18d46$fd488520$3e8ca8c0@opr2.bee> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1251" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.71.1712.3 X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG òàê ãäå-æå ìîæíî ñêà÷àòü freebcd ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 5:57:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id D39F637B405 for ; Tue, 25 Dec 2001 05:57:53 -0800 (PST) Received: from colt.ncptiddische.net (ppp-162.wobline.de [212.68.69.170]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBPDvk831867 for ; Tue, 25 Dec 2001 14:57:46 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBPDxpX65109 for ; Tue, 25 Dec 2001 14:59:52 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBPDwFi00920 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 14:58:15 +0100 (CET) (envelope-from nils) Date: Tue, 25 Dec 2001 14:58:11 +0100 From: Nils Holland To: freebsd-questions@freebsd.org Subject: Question about files in /usr/lib Message-ID: <20011225145811.A901@tisys.org> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 2:52PM up 1:38, 1 user, load averages: 0.03, 0.04, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I have a short question about the library files in /usr/lib. First of all, here's a piece of the output I get when doing ls -l /usr/lib: total 28480 -r--r--r-- 1 root wheel 1206790 Dec 22 10:12 libc.a lrwxr-xr-x 1 root wheel 9 Dec 22 10:12 libc.so -> libc.so.4 -r--r--r-- 1 root wheel 573348 Dec 22 10:12 libc.so.4 -r--r--r-- 1 root wheel 1309752 Sep 18 19:24 libc_p.a -r--r--r-- 1 root wheel 1440094 Dec 22 10:12 libc_pic.a -r--r--r-- 1 root wheel 1457880 Dec 22 10:12 libc_r.a lrwxr-xr-x 1 root wheel 11 Dec 22 10:12 libc_r.so -> libc_r.so.4 -r--r--r-- 1 root wheel 676488 Dec 22 10:12 libc_r.so.4 -r--r--r-- 1 root wheel 1579382 Sep 18 19:25 libc_r_p.a Now, here's the question: libc.a, libc.so.4 and others are dated 2001-12-22, which is the last time I did "make world" on my machine, so the date of these files makes sense. But what's up with libc_p.a, for example? That file is dated 2001-09-18, which is probably the day I installed 4.4-RELEASE on that given machine, or the day 4.4-RELEASE was built. So, the question: What is libc_p.a (and all the other September-dated _p.a files in /usr/lib) there for, why doesn't it get updated when doing "make world"? I guess there's a good reason for that - but since I don't even know why there is a libc_p.a file besides libc.a and libc.so.4, I don't know what this reason is. So, any explanations would be welcome ;-) Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 6: 5:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 77D8C37B419 for ; Tue, 25 Dec 2001 06:05:52 -0800 (PST) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id 035722B6DA; Tue, 25 Dec 2001 15:05:10 +0100 (CET) Received: by k7.mavetju.org (Postfix, from userid 1001) id 58D8E504; Wed, 26 Dec 2001 01:04:47 +1100 (EST) Date: Wed, 26 Dec 2001 01:04:47 +1100 From: Edwin Groothuis To: Nils Holland Cc: freebsd-questions@freebsd.org Subject: Re: Question about files in /usr/lib Message-ID: <20011226010447.A1000@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , Nils Holland , freebsd-questions@freebsd.org References: <20011225145811.A901@tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225145811.A901@tisys.org>; from nils@tisys.org on Tue, Dec 25, 2001 at 02:58:11PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: > So, the question: What is libc_p.a (and all the other September-dated _p.a > files in /usr/lib) there for, why doesn't it get updated when doing "make > world"? I guess there's a good reason for that - but since I don't even > know why there is a libc_p.a file besides libc.a and libc.so.4, I don't > know what this reason is. They are profiled libraries (i.e. compiled with the GCC -pg option). I don't know why they aren't remade. Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: ------------------+ http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 6:17:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id CC8CC37B41A for ; Tue, 25 Dec 2001 06:17:25 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWL4W00.XUI for ; Tue, 25 Dec 2001 15:19:44 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWKU800.I4A for ; Tue, 25 Dec 2001 15:13:20 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPEK8l92404 for freebsd-questions@FreeBSD.ORG; Tue, 25 Dec 2001 15:20:08 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 15:20:07 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib Message-ID: <20011225152007.A86639@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011225145811.A901@tisys.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="ZPt4rx8FFjLCG7dd" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225145811.A901@tisys.org>; from nils@tisys.org on Tue, Dec 25, 2001 at 02:58:11PM +0100 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: > Hi folks, >=20 > So, the question: What is libc_p.a (and all the other September-dated _p.a > files in /usr/lib) there for, why doesn't it get updated when doing "make > world"? I guess there's a good reason for that - but since I don't even > know why there is a libc_p.a file besides libc.a and libc.so.4, I don't > know what this reason is. These are profiled libraries. I never install them, and I don't want them on my system, so I have NOPROFILE=3Dtrue in /etc/make.conf. You may have ran make with an argument like that, as stated in the handbook. This is useful because profiled libraries are hardly used and they take a lot of time to build. HTH > Greetings > Nils >=20 > --=20 > Nils Holland > Ti Systems - FreeBSD in Tiddische, Germany > http://www.tisys.org * nils@tisys.org >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --ZPt4rx8FFjLCG7dd Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KIsXzz00ZOPKycwRAiANAJ9lFvRMfZMef9TV1xbdLlIEpyZp5wCeLdV7 8VkV+Vnv+ssCEHYhlS118LA= =1SjX -----END PGP SIGNATURE----- --ZPt4rx8FFjLCG7dd-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 6:36:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 4723E37B41A for ; Tue, 25 Dec 2001 06:36:25 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id IAA28479; Tue, 25 Dec 2001 08:36:20 -0600 (CST) Message-Id: <3.0.5.32.20011225083617.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Tue, 25 Dec 2001 08:36:17 -0600 To: Julio Merino , freebsd-questions@FreeBSD.ORG From: jacks@sage-american.com Subject: Re: Question about files in /usr/lib In-Reply-To: <20011225152007.A86639@klamath.local> References: <20011225145811.A901@tisys.org> <20011225145811.A901@tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hmmmm.... I have those too and if they are NOT necessary, I would like to eliminate them on future makes too. Please, what is the URL of that Handbook page so I may read it carefully before changing my make.conf.... thanks! At 03:20 PM 12.25.2001 +0100, Julio Merino wrote: >On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: >> Hi folks, >> >> So, the question: What is libc_p.a (and all the other September-dated _p.a >> files in /usr/lib) there for, why doesn't it get updated when doing "make >> world"? I guess there's a good reason for that - but since I don't even >> know why there is a libc_p.a file besides libc.a and libc.so.4, I don't >> know what this reason is. > >These are profiled libraries. I never install them, and I don't want >them on my system, so I have NOPROFILE=true in /etc/make.conf. You may >have ran make with an argument like that, as stated in the handbook. > >This is useful because profiled libraries are hardly used and they take >a lot of time to build. > >HTH > >> Greetings >> Nils >> >> -- >> Nils Holland >> Ti Systems - FreeBSD in Tiddische, Germany >> http://www.tisys.org * nils@tisys.org >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message > >-- >La ignorancia es la felicidad. > >Julio Merino (Slink) > >Attachment Converted: "c:\eudora\attach\Re Question about files in us" > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 7:17:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gilberto.physik.rwth-aachen.de (gilberto.physik.RWTH-Aachen.DE [137.226.46.168]) by hub.freebsd.org (Postfix) with ESMTP id 977FE37B417 for ; Tue, 25 Dec 2001 07:17:23 -0800 (PST) Received: (from kuku@localhost) by gilberto.physik.rwth-aachen.de (8.11.1/8.9.3) id fBPFHLi63192 for questions@freebsd.org; Tue, 25 Dec 2001 16:17:21 +0100 (CET) (envelope-from kuku) Date: Tue, 25 Dec 2001 16:17:21 +0100 (CET) From: Christoph Kukulies Message-Id: <200112251517.fBPFHLi63192@gilberto.physik.rwth-aachen.de> To: questions@freebsd.org Subject: need help with pppoe after upgrade to 4.4 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I had DSL over pppoe running fine with 4.2 and netgraph in the kernel. Now I upgraded to 4.4. Despite from trouble with an SMC card (ed0) which was not initialized correctly during initialization (ed0 timeout and problems with d0000 memory initialization) I have the following problems: tun0 isn't there anymore when I disable ipv6. Why is this ipv6 stuff enabled so penetrantly? It gets hands on my de0 interface (need it for DSL) and I suspect that this inhibits pppoe from working. Can anyone help me, please. I urgently need to be online again soon. (currently I'm logging in via a modem through an alternate site but can do only text mode typing. -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 7:37:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id BF05837B405 for ; Tue, 25 Dec 2001 07:37:16 -0800 (PST) Received: from colt.ncptiddische.net (ppp-125.wobline.de [212.68.69.133]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBPFbE804638; Tue, 25 Dec 2001 16:37:14 +0100 Received: from tisys.org (jodie.ncptiddische.net [192.168.0.2]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBPFdKX65342; Tue, 25 Dec 2001 16:39:21 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBPFbRJ00423; Tue, 25 Dec 2001 16:37:27 +0100 (CET) (envelope-from nils) Date: Tue, 25 Dec 2001 16:37:27 +0100 From: Nils Holland To: Julio Merino Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib Message-ID: <20011225163727.A350@tisys.org> Mail-Followup-To: Julio Merino , freebsd-questions@FreeBSD.ORG References: <20011225145811.A901@tisys.org> <20011225152007.A86639@klamath.local> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225152007.A86639@klamath.local>; from juli@merino.net on Tue, Dec 25, 2001 at 03:20:07PM +0100 X-Operating-System: FreeBSD jodie.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 4:31PM up 7 mins, 1 user, load averages: 0.01, 0.02, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 03:20:07PM +0100, Julio Merino stood up and spoke: > > These are profiled libraries. I never install them, and I don't want > them on my system, so I have NOPROFILE=true in /etc/make.conf. You may > have ran make with an argument like that, as stated in the handbook. > > This is useful because profiled libraries are hardly used and they take > a lot of time to build. Well, do the profiled libraries automatically get installed when installing a release? Looking at the date in the directory tree, it seems as if the 4.4-RELEASE install on my machine installed them, but any make worlds no longer updated them, as I also have NOPROFILE=true set in make.conf. So, I guess since these libraries are not useful for anything, I could well delete them, right? On the other hand, the probably also wouldn't do any harm (except wasting disk space) if I just left them around, I guess... Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 7:43:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 2EE7E37B419 for ; Tue, 25 Dec 2001 07:43:49 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id JAA07238; Tue, 25 Dec 2001 09:43:43 -0600 (CST) Message-Id: <3.0.5.32.20011225094340.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Tue, 25 Dec 2001 09:43:40 -0600 To: Julio Merino , freebsd-questions@FreeBSD.ORG From: jacks@sage-american.com Subject: Re: Question about files in /usr/lib - ooops! In-Reply-To: <3.0.5.32.20011225083617.01691728@mail.sage-american.com> References: <20011225152007.A86639@klamath.local> <20011225145811.A901@tisys.org> <20011225145811.A901@tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Oooops! I already have NOPROFILE=true in my make.conf, so then what real effect does it have on these directories/files..???? After seeing the other poster (Nils), apparrently none.... At 08:36 AM 12.25.2001 -0600, jacks@sage-american.com wrote: >hmmmm.... I have those too and if they are NOT necessary, I would like to >eliminate them on future makes too. Please, what is the URL of that >Handbook page so I may read it carefully before changing my make.conf.... >thanks! > >At 03:20 PM 12.25.2001 +0100, Julio Merino wrote: >>On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: >>> Hi folks, >>> >>> So, the question: What is libc_p.a (and all the other September-dated _p.a >>> files in /usr/lib) there for, why doesn't it get updated when doing "make >>> world"? I guess there's a good reason for that - but since I don't even >>> know why there is a libc_p.a file besides libc.a and libc.so.4, I don't >>> know what this reason is. >> >>These are profiled libraries. I never install them, and I don't want >>them on my system, so I have NOPROFILE=true in /etc/make.conf. You may >>have ran make with an argument like that, as stated in the handbook. >> >>This is useful because profiled libraries are hardly used and they take >>a lot of time to build. >> >>HTH >> >>> Greetings >>> Nils >>> >>> -- >>> Nils Holland >>> Ti Systems - FreeBSD in Tiddische, Germany >>> http://www.tisys.org * nils@tisys.org >>> >>> To Unsubscribe: send mail to majordomo@FreeBSD.org >>> with "unsubscribe freebsd-questions" in the body of the message >> >>-- >>La ignorancia es la felicidad. >> >>Julio Merino (Slink) >> >>Attachment Converted: "c:\eudora\attach\Re Question about files in us" >> > >Best regards, >Jack L. Stone, >Server Admin > >Sage-American >http://www.sage-american.com >jacks@sage-american.com > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 7:56:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 6CF5F37B416 for ; Tue, 25 Dec 2001 07:56:16 -0800 (PST) Received: by mail.broadpark.no (Postfix, from userid 60001) id 6E44A82FF; Tue, 25 Dec 2001 16:55:59 +0100 (MET) To: freebsd-questions@freebsd.org Subject: Fonts in LyX, or fonts in X -- I have no idea... Message-ID: <1009295759.3c28a18f610d8@mail.broadpark.no> Date: Tue, 25 Dec 2001 16:55:59 +0100 (MET) From: johann@broadpark.no Cc: lyx-users@lists.lyx.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP IMAP webmail program 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello =) I have a few questions I'd like to ask. I'll start shooting. 1) I just installed the cmpsfont port (Computer Modern PostScript Fonts (Adobe Type 1 format)) hoping new and good looking fonts would appear in LyX. It doesn't seem like it though -- does anyone know what I could do? 2) The previous question was an attempt to load better, more beautiful and more modern fonts into LyX than the ones already available. Why won't LyX recognize and allow me to use all of my X fonts? The same goes for GIMP by the way, not all are available. 3) Could anyone with a decent experience with LyX show me examples of really professional work? I'm really into this whole LyX thing, I believe it'll do wonders for me next semester in school. If anyone know of any hot templates and fonts as well, it would sincerely be appreciated. Merry Christmas! Cheerio! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 8: 7: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 9E97C37B417 for ; Tue, 25 Dec 2001 08:07:05 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWQ7U00.8UQ for ; Tue, 25 Dec 2001 17:09:30 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWPX601.H3Z; Tue, 25 Dec 2001 17:03:06 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPG9sE92723; Tue, 25 Dec 2001 17:09:54 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 17:09:54 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Cc: Julio Merino Subject: Re: Question about files in /usr/lib Message-ID: <20011225170954.A91872@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG, Julio Merino References: <20011225145811.A901@tisys.org> <20011225152007.A86639@klamath.local> <20011225163727.A350@tisys.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="IJpNTDwzlM2Ie8A6" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225163727.A350@tisys.org>; from nils@tisys.org on Tue, Dec 25, 2001 at 04:37:27PM +0100 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --IJpNTDwzlM2Ie8A6 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Dec 25, 2001 at 04:37:27PM +0100, Nils Holland wrote: > On Tue, Dec 25, 2001 at 03:20:07PM +0100, Julio Merino stood up and spoke: > Well, do the profiled libraries automatically get installed when installi= ng > a release? Looking at the date in the directory tree, it seems as if the > 4.4-RELEASE install on my machine installed them, but any make worlds no > longer updated them, as I also have NOPROFILE=3Dtrue set in make.conf. They get installed if you want. I don't know about the presets on the install (User, User + X, Minimal, etc); I always choose "custom selection" of sets, and then I do not install the profiled libraries. > So, I guess since these libraries are not useful for anything, I could we= ll > delete them, right? On the other hand, the probably also wouldn't do any > harm (except wasting disk space) if I just left them around, I guess... I've checked it on my system and I have only a few of them (maybe 2 or 3) don't know why. They are dated on april (because I installed 4.3-release and then upgraded). You are safe to delete them, as I'll do now with this old files. HTH >=20 > Greetings > Nils >=20 > --=20 > Nils Holland > Ti Systems - FreeBSD in Tiddische, Germany > http://www.tisys.org * nils@tisys.org --=20 La ignorancia es la felicidad. Julio Merino (Slink) --IJpNTDwzlM2Ie8A6 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KKTSzz00ZOPKycwRAgd0AJsHVTO/gfNrB794P/uDZ4w4QbS3CwCgqp01 euZi1eVexPHMY4gTFq6eyTE= =Ec8/ -----END PGP SIGNATURE----- --IJpNTDwzlM2Ie8A6-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 8: 8:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 62D9137B41A for ; Tue, 25 Dec 2001 08:08:05 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWQ9I01.3QB for ; Tue, 25 Dec 2001 17:10:30 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWPYU01.K5Z for ; Tue, 25 Dec 2001 17:04:06 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPGAsD92813 for freebsd-questions@FreeBSD.ORG; Tue, 25 Dec 2001 17:10:54 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 17:10:54 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib Message-ID: <20011225171054.B91872@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011225145811.A901@tisys.org> <20011225145811.A901@tisys.org> <20011225152007.A86639@klamath.local> <3.0.5.32.20011225083617.01691728@mail.sage-american.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="+pHx0qQiF2pBVqBT" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3.0.5.32.20011225083617.01691728@mail.sage-american.com>; from jacks@sage-american.com on Tue, Dec 25, 2001 at 08:36:17AM -0600 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --+pHx0qQiF2pBVqBT Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Dec 25, 2001 at 08:36:17AM -0600, jacks@sage-american.com wrote: > hmmmm.... I have those too and if they are NOT necessary, I would like to > eliminate them on future makes too. Please, what is the URL of that > Handbook page so I may read it carefully before changing my make.conf.... > thanks! Go to http://www.freebsd.org/handbook, to the "Cutting edge" section I gues= s. You can also issue a "man make.conf"... wonderful man page ;) HTH >=20 > At 03:20 PM 12.25.2001 +0100, Julio Merino wrote: > >On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: > >> Hi folks, > >>=20 > >> So, the question: What is libc_p.a (and all the other September-dated = _p.a > >> files in /usr/lib) there for, why doesn't it get updated when doing "m= ake > >> world"? I guess there's a good reason for that - but since I don't even > >> know why there is a libc_p.a file besides libc.a and libc.so.4, I don't > >> know what this reason is. > > > >These are profiled libraries. I never install them, and I don't want > >them on my system, so I have NOPROFILE=3Dtrue in /etc/make.conf. You may > >have ran make with an argument like that, as stated in the handbook. > > > >This is useful because profiled libraries are hardly used and they take > >a lot of time to build. > > > >HTH > > > >> Greetings > >> Nils > >>=20 > >> --=20 > >> Nils Holland > >> Ti Systems - FreeBSD in Tiddische, Germany > >> http://www.tisys.org * nils@tisys.org > >>=20 > >> To Unsubscribe: send mail to majordomo@FreeBSD.org > >> with "unsubscribe freebsd-questions" in the body of the message > > > >--=20 > >La ignorancia es la felicidad. > > > >Julio Merino (Slink) > > > >Attachment Converted: "c:\eudora\attach\Re Question about files in us" > > >=20 > Best regards, > Jack L. Stone, > Server Admin >=20 > Sage-American > http://www.sage-american.com > jacks@sage-american.com >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --+pHx0qQiF2pBVqBT Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KKUOzz00ZOPKycwRAofyAKCdkRjVqZKoJzvjlApECeiVdnpRIgCgkjES Uf1hMrS1zgCjhgwJ3DdBYa8= =WIOG -----END PGP SIGNATURE----- --+pHx0qQiF2pBVqBT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 8: 9: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 6EFA437B405 for ; Tue, 25 Dec 2001 08:08:58 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWQAZ00.6RO for ; Tue, 25 Dec 2001 17:11:23 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWQ0B01.P66 for ; Tue, 25 Dec 2001 17:04:59 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPGBh793050 for freebsd-questions@FreeBSD.ORG; Tue, 25 Dec 2001 17:11:43 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 17:11:43 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib - ooops! Message-ID: <20011225171143.C91872@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011225152007.A86639@klamath.local> <20011225145811.A901@tisys.org> <20011225145811.A901@tisys.org> <3.0.5.32.20011225083617.01691728@mail.sage-american.com> <3.0.5.32.20011225094340.01691728@mail.sage-american.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="WplhKdTI2c8ulnbP" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3.0.5.32.20011225094340.01691728@mail.sage-american.com>; from jacks@sage-american.com on Tue, Dec 25, 2001 at 09:43:40AM -0600 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --WplhKdTI2c8ulnbP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Dec 25, 2001 at 09:43:40AM -0600, jacks@sage-american.com wrote: > Oooops! I already have NOPROFILE=3Dtrue in my make.conf, so then what real > effect does it have on these directories/files..???? After seeing the oth= er > poster (Nils), apparrently none.... This only avoids the compilation of new profiled libraries when doing a make world. If you had them in your system, make world won't delete them. >=20 > At 08:36 AM 12.25.2001 -0600, jacks@sage-american.com wrote: > >hmmmm.... I have those too and if they are NOT necessary, I would like to > >eliminate them on future makes too. Please, what is the URL of that > >Handbook page so I may read it carefully before changing my make.conf.... > >thanks! > > > >At 03:20 PM 12.25.2001 +0100, Julio Merino wrote: > >>On Tue, Dec 25, 2001 at 02:58:11PM +0100, Nils Holland wrote: > >>> Hi folks, > >>>=20 > >>> So, the question: What is libc_p.a (and all the other September-dated= _p.a > >>> files in /usr/lib) there for, why doesn't it get updated when doing "= make > >>> world"? I guess there's a good reason for that - but since I don't ev= en > >>> know why there is a libc_p.a file besides libc.a and libc.so.4, I don= 't > >>> know what this reason is. > >> > >>These are profiled libraries. I never install them, and I don't want > >>them on my system, so I have NOPROFILE=3Dtrue in /etc/make.conf. You may > >>have ran make with an argument like that, as stated in the handbook. > >> > >>This is useful because profiled libraries are hardly used and they take > >>a lot of time to build. > >> > >>HTH > >> > >>> Greetings > >>> Nils > >>>=20 > >>> --=20 > >>> Nils Holland > >>> Ti Systems - FreeBSD in Tiddische, Germany > >>> http://www.tisys.org * nils@tisys.org > >>>=20 > >>> To Unsubscribe: send mail to majordomo@FreeBSD.org > >>> with "unsubscribe freebsd-questions" in the body of the message > >> > >>--=20 > >>La ignorancia es la felicidad. > >> > >>Julio Merino (Slink) > >> > >>Attachment Converted: "c:\eudora\attach\Re Question about files in us" > >> > > > >Best regards, > >Jack L. Stone, > >Server Admin > > > >Sage-American > >http://www.sage-american.com > >jacks@sage-american.com > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > >=20 > Best regards, > Jack L. Stone, > Server Admin >=20 > Sage-American > http://www.sage-american.com > jacks@sage-american.com >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --WplhKdTI2c8ulnbP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KKU+zz00ZOPKycwRArRdAJ9o3gCxHOPeXO1wqIP4jd33k7PaogCffb1M zHXHK6M0FGDnRVCronj06DY= =t7PS -----END PGP SIGNATURE----- --WplhKdTI2c8ulnbP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 8:16:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id B5FB637B419 for ; Tue, 25 Dec 2001 08:16:23 -0800 (PST) Received: from colt.ncptiddische.net (ppp-125.wobline.de [212.68.69.133]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBPGGD806835; Tue, 25 Dec 2001 17:16:13 +0100 Received: from tisys.org (jodie.ncptiddische.net [192.168.0.2]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBPGIKX65516; Tue, 25 Dec 2001 17:18:20 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBPGH1300740; Tue, 25 Dec 2001 17:17:01 +0100 (CET) (envelope-from nils) Date: Tue, 25 Dec 2001 17:17:01 +0100 From: Nils Holland To: jacks@sage-american.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib - ooops! Message-ID: <20011225171701.A689@tisys.org> Mail-Followup-To: jacks@sage-american.com, freebsd-questions@FreeBSD.ORG References: <20011225152007.A86639@klamath.local> <20011225145811.A901@tisys.org> <20011225145811.A901@tisys.org> <3.0.5.32.20011225083617.01691728@mail.sage-american.com> <3.0.5.32.20011225094340.01691728@mail.sage-american.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3.0.5.32.20011225094340.01691728@mail.sage-american.com>; from jacks@sage-american.com on Tue, Dec 25, 2001 at 09:43:40AM -0600 X-Operating-System: FreeBSD jodie.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 5:10PM up 47 mins, 1 user, load averages: 0.13, 0.04, 0.01 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 09:43:40AM -0600, jacks@sage-american.com stood up and spoke: > Oooops! I already have NOPROFILE=true in my make.conf, so then what real > effect does it have on these directories/files..???? After seeing the other > poster (Nils), apparrently none.... Well, I guess that you and I got the files on our machines when we installed our FreeBSD releases on them. Since we have set NOPROFILE=true, any make world's did not rebuild the libs and now we are stuck with the old ones. I think that the libs don't have any effects, and can either be deleted, or left lying around. That probably won't make a difference. If we wanted our profiled libs updated, we'd have to change the NOPROFILE line in make.conf, and the next make world would update them, but, as has been said, this takes a long time and isn't necessarry. Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 9:16:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail3.cableone.net (mail3.cableone.net [24.116.0.57]) by hub.freebsd.org (Postfix) with ESMTP id 6985E37B419 for ; Tue, 25 Dec 2001 09:16:49 -0800 (PST) Received: from cis7.cableone.net ([24.116.0.41]) by mail3.cableone.net with Microsoft SMTPSVC(5.5.1877.687.68); Tue, 25 Dec 2001 10:12:16 -0700 Received: from mail pickup service by cis7.cableone.net with Microsoft SMTPSVC; Tue, 25 Dec 2001 10:16:45 -0700 From: To: "GB Clark II" Cc: Subject: RE: shared object "libc.so.6" not found Date: Tue, 25 Dec 2001 10:16:45 -0700 Message-ID: <17acf01c18d67$ed9ea6b0$2900740a@cableone.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft CDO for Windows 2000 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Content-Class: urn:content-classes:message Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After all else failed, reinstalled X & KDE. Everything back to normal, but still can't run netscape. Updated the paths myself in /usr/etc/defaults/rc.conf ldconfig section & the missing libc.so.6 is in the system in the path. Guess I'll just keep using Konqueror until I can figure it out. Forgot to mention am using 4.4 stable. Never had the problem with 4.3 before upgrading. -----Original Message----- From: "owner-freebsd-questions@FreeBSD.ORG" = on behalf of "GB Clark II" = Sent: Mon, 24 Dec 2001 07:52:37 -0600 To: "dennyboy@cableone.net" , = "freebsd-questions@FreeBSD.ORG" Subject: Re: shared object "libc.so.6" not found On Monday 24 December 2001 05:13, dennyboy@cableone.net wrote: > had installed netscape, the bsd version, since > the linux version never worked due to not being > able to find the lib files it needed. Same story > with the bsd version. Tried copying libXt.so.6 > & libXtst.so.6.1 to several lib directories and > then creating the soft links, but it still would > not work. After rebooting & attempting to startx, > got the following message: > /usr/libexec/ld-elf.so.1: Shared object "libc.so.6" > not found. > Can someone tell me how to fix this? I hate to do > a complete reinstall. Everything else is working > fine. Thanks. > That almost has to be a Linux binary. Last time I checked, FreeBSD does = not have a version 6 libc. GB --=20 GB Clark II | Roaming FreeBSD Admin gclarkii@VSServices.COM | General Geek=20 CTHULU for President - Why choose the lesser of two evils? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 10:14:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id B41CC37B41A for ; Tue, 25 Dec 2001 10:14:26 -0800 (PST) Received: (qmail 23682 invoked from network); 25 Dec 2001 18:14:20 -0000 Received: from dap-209-166-133-201.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.201) by smtp3.mx.pitdc1.stargate.net with SMTP; 25 Dec 2001 18:14:20 -0000 Received: (qmail 74478 invoked from network); 25 Dec 2001 18:14:46 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 25 Dec 2001 18:14:46 -0000 From: "Doug Reynolds" To: "FBSD Questions" , "Joe & Fhe Barbish" Date: Tue, 25 Dec 2001 13:15:37 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: disk space usage commands Message-Id: <20011225181426.B41CC37B41A@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 20:19:25 -0500, Joe & Fhe Barbish wrote: > >I want to know how full my FBSD hard drive partition is. >I used dm -h -l 1 it shows what is used but not what used out of total >available. What other commands are available to display disk usage? try man du, man df --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 10:16: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id B3AD837B419 for ; Tue, 25 Dec 2001 10:16:04 -0800 (PST) Received: (qmail 22891 invoked from network); 25 Dec 2001 18:16:03 -0000 Received: from dap-209-166-133-201.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.201) by smtp2.mx.pitdc1.stargate.net with SMTP; 25 Dec 2001 18:16:03 -0000 Received: (qmail 75326 invoked from network); 25 Dec 2001 18:16:29 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 25 Dec 2001 18:16:29 -0000 From: "Doug Reynolds" To: "jramos2@nc.rr.com" , "questions@freebsd.org" Date: Tue, 25 Dec 2001 13:17:21 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011224202803.A13296@europa.ramos.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: IDE CD Writer Question Message-Id: <20011225181604.B3AD837B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 24 Dec 2001 20:28:03 -0500, J Ramos wrote: >Sorry for asking a probably beaten to death question, but the mailing list >archives keep coming up as unavailable. Is there anything to use to write >data and music CD's to an IDE burner under FreeBSD? I used xcdroast under >Linux previously, but I don't use Linux anymore. cdrecord -scanbus returns >errors, and xcdroast can't scan the bus either, no surprise there... burncd although someone announced they had a scsi emulation patch in order to run cdrecord.. if you want that, you might ask on freebsd-hackers --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 10:17:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id E9DC437B419 for ; Tue, 25 Dec 2001 10:17:25 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWW8X01.YRZ for ; Tue, 25 Dec 2001 19:19:45 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOWVY901.R7X for ; Tue, 25 Dec 2001 19:13:21 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPIK9J69717 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 19:20:09 +0100 (CET) (envelope-from juli) Date: Tue, 25 Dec 2001 19:20:09 +0100 From: Julio Merino To: freebsd-questions@freebsd.org Subject: Where is pdfjadetex? Message-ID: <20011225192009.A69702@klamath.local> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="h31gzZEtNLTqOjlF" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all I can't find any port containing pdfjadetex... Where is it (port) ? Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --h31gzZEtNLTqOjlF Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KMNZzz00ZOPKycwRAnSIAJ9T8I54e4qabD6up6Ustnd67Vws0QCeK8Ex p11fZvV6UT4opq8ai0NNCvU= =TeZn -----END PGP SIGNATURE----- --h31gzZEtNLTqOjlF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 10:20:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 0B3D937B419 for ; Tue, 25 Dec 2001 10:20:11 -0800 (PST) Received: (qmail 27811 invoked from network); 25 Dec 2001 18:20:09 -0000 Received: from dap-209-166-133-201.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (209.166.133.201) by smtp2.mx.pitdc1.stargate.net with SMTP; 25 Dec 2001 18:20:09 -0000 Received: (qmail 78055 invoked from network); 25 Dec 2001 18:20:36 -0000 Received: from unknown (HELO mother.wastegate.net) (192.168.1.2) by 192.168.1.1 with SMTP; 25 Dec 2001 18:20:36 -0000 From: "Doug Reynolds" To: "Christoph Kukulies" , "questions@freebsd.org" Date: Tue, 25 Dec 2001 13:21:28 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <200112251517.fBPFHLi63192@gilberto.physik.rwth-aachen.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: need help with pppoe after upgrade to 4.4 Message-Id: <20011225182011.0B3D937B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 25 Dec 2001 16:17:21 +0100 (CET), Christoph Kukulies wrote: > >I had DSL over pppoe running fine with 4.2 and netgraph in the kernel. > >Now I upgraded to 4.4. Despite from trouble with an SMC card (ed0) >which was not initialized correctly during initialization (ed0 timeout >and problems with d0000 memory initialization) I have the following problems: > >tun0 isn't there anymore when I disable ipv6. > >Why is this ipv6 stuff enabled so penetrantly? It gets hands on >my de0 interface (need it for DSL) and I suspect that this inhibits >pppoe from working. > >Can anyone help me, please. I urgently need to be online again soon. >(currently I'm logging in via a modem through an alternate site >but can do only text mode typing. make sure it is in your kernel. it is near the bottom of the GENERIC kernel --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 10:34:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.mail.pas.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 65F7637B416 for ; Tue, 25 Dec 2001 10:34:14 -0800 (PST) Received: from sdn-ar-008dcwashp032.dialsprint.net ([63.178.91.144] helo=moo.holy.cow) by albatross.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16IwOo-0003od-00; Tue, 25 Dec 2001 10:34:03 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id 28F5D50E29; Tue, 25 Dec 2001 13:35:56 -0500 (EST) Date: Tue, 25 Dec 2001 13:35:56 -0500 From: parv To: Julio Merino Cc: freebsd-questions@freebsd.org Subject: Re: portupgrade and XFree86-4 Message-ID: <20011225133556.A31096@moo.holy.cow> Mail-Followup-To: Julio Merino , freebsd-questions@freebsd.org References: <20011225121113.A33958@klamath.local> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011225121113.A33958@klamath.local>; from juli@merino.net on Tue, Dec 25, 2001 at 12:11:13PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message <20011225121113.A33958@klamath.local>, wrote Julio Merino thusly... > > But there is something that annoys me. Everytime I do a portinstall > of a port that depends on X, it registers dependancies to imake and > XFree86-4-libraries. Then, I've to run 'pkgdb -F' to correct these > dependancies by hand, and I make them to point to XFree86-4. > > Is it there any way to do this automagically? i also have installed the XFree86-4 port. i "solved" the same problem by making symlinks from XFree86-4 to -libraries and imake and anything else that would require XFree86-*. so, now if/when i run 'pkgdb -F', i am asked if i want to "remove any of them" due to "duplicate origin" ... to which i say "no". other solution my be to install individual XFree86 ports. there was a thread on some list about creation of XFree86-4 metaport (which would install individual pieces instead of one big port as it is now). - parv -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 11:22:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail08b.verio.de (mail08b.verio.de [213.198.0.59]) by hub.freebsd.org (Postfix) with SMTP id AD1C337B417 for ; Tue, 25 Dec 2001 11:22:49 -0800 (PST) Received: from www.microcom-de.com (213.198.60.165) by mail08b.verio.de (RS ver 1.0.60s) with SMTP id 02987849; Tue, 25 Dec 2001 20:22:51 +0100 (CET) Received: from cpimssmtpa01.msn.com=1 (0-1pool65-182.nas1.houston2.tx.us.da.qwest.net [63.232.65.182]) by mcm_server.microcom with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id X50QQJPQ; Tue, 25 Dec 2001 20:17:48 +0100 Message-ID: <000013235113$000038b0$00002384@cpimssmtpa01.msn.com=1> To: From: teeniesuckathon354v24@msn.com Subject: I'LL DO AAAANYYYTHING YOU WANT (FREE) YT Date: Mon, 24 Dec 2001 13:19:02 -2000 MIME-Version: 1.0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Loop-Detect: 1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Untitled Document



To get off this list click = here To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 11:40:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from domain.com (44.mujb.dlls.dllstxbk.dsl.att.net [12.98.249.44]) by hub.freebsd.org (Postfix) with SMTP id 9209537B419 for ; Tue, 25 Dec 2001 11:40:18 -0800 (PST) Received: (qmail 39909 invoked by alias); 25 Dec 2001 19:40:57 -0000 Received: from unknown (HELO there) (127.0.0.1) by loopback with SMTP; 25 Dec 2001 19:40:57 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Jason Halbert Reply-To: jason@jason-n3xt.org To: "Joe & Fhe Barbish" , "FBSD Questions" Subject: Re: CVSup Servers Date: Tue, 25 Dec 2001 19:40:57 +0000 X-Mailer: KMail [version 1.3] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011225194018.9209537B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 24-Dec-01 14:09, Joe & Fhe Barbish wrote: > Why not check out the online handbook section a.6.7 CVSup Sites. It > gives the sites location. > > I always use cvsup 9 or 10, they are very fast > > On Sunday 23 December 2001 11:33 pm, Jason Halbert wrote: > > I just checked and cvsup3 is working for me again. I like cvsup3 > > because I always get a fast connection to it. Maybe I should > > traceroute a few servers to find out which I am closest to. > > For the same reason that I don't get a good transfer rate between my server and a friend's server that's a mile away. Distance doesn't always mean the route between two places is going to be short. Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 12:13: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebsdportal.com (ci590846-b.lxintn1.ky.home.com [24.9.218.175]) by hub.freebsd.org (Postfix) with ESMTP id CC46837B405 for ; Tue, 25 Dec 2001 12:12:56 -0800 (PST) Received: (from jfreeze@localhost) by freebsdportal.com (8.11.6/8.11.6) id fBPKGNW19818; Tue, 25 Dec 2001 15:16:23 -0500 (EST) (envelope-from jfreeze) Date: Tue, 25 Dec 2001 15:16:22 -0500 From: Jim Freeze To: jbw Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Anyone using USB cameras with FreeBSD 4.4? Message-ID: <20011225151622.A19770@freebsdportal.com> References: <200112120147.RAA761627@meer.meer.net> <20011211223328.A1407@arem.peritian.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011211223328.A1407@arem.peritian.com>; from j.bw@verizon.net on Tue, Dec 11, 2001 at 10:33:28PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 11, 2001 at 10:33:28PM -0500, jbw wrote: > > when you plug in the camera to the USB port it registers in the message > log i.e. > > Dec 11 22:22:00 arem /kernel: umass0: OLYMPUS C-4040ZOOM, rev 1.10/1.00, addr 2 > Dec 11 22:22:00 arem /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > Dec 11 22:22:00 arem /kernel: da0: Removable Direct Access SCSI-2 device > Dec 11 22:22:00 arem /kernel: da0: 650KB/s transfers > Dec 11 22:22:00 arem /kernel: da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) > > then you just do the following > > mount_msdos /dev/da0s1 /mnt > > cd /mnt and then just copy the files over > Hi: I have a 2040Z and tried the above. Almost worked, but not quite. Below is a listing of what I did and the corresponding output of /var/log/messages: => Plugged camera into usb port Dec 25 15:02:14 rabbit /kernel: umass0: OLYMPUS C-2040ZOOM, rev 1.10/1.00, addr 2 Dec 25 15:02:14 rabbit /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Dec 25 15:02:14 rabbit /kernel: da0: Removable Direct Access SCSI-2 device Dec 25 15:02:14 rabbit /kernel: da0: 650KB/s transfers Dec 25 15:02:14 rabbit /kernel: da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) => All looks good. Now su to root so we can mount the drive. Dec 25 15:03:00 rabbit su: jfreeze to root on /dev/ttyp4 => # mount_msdos /dev/da0s1 /mnt Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0 Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0 Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): Invalid command operation code Dec 25 15:03:42 rabbit /kernel: da0: reading primary partition table: error reading fsbn 0 I also tried mount -t msdos and other variants on /dev/da0xx, but no luck. I have all the necessary devices in my kernel, I think. The usb section of my kernel: # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) I am running 4.4R. uname -a FreeBSD rabbit 4.4-RELEASE FreeBSD 4.4-RELEASE #2: Sat Oct 6 13:08:28 EDT 2001 jfreeze@rabbit:/usr/obj/usr/src/sys/RABBIT i386 -- Jim Freeze Today is a fine day for Ruby programming. www.freeze.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 12:20:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id F3FCB37B419 for ; Tue, 25 Dec 2001 12:20:12 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 9FB58BD25; Tue, 25 Dec 2001 12:20:12 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id MAA00926; Tue, 25 Dec 2001 12:20:11 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBPKKAO30083; Tue, 25 Dec 2001 12:20:10 -0800 (PST) (envelope-from swear@blarg.net) To: Nils Holland Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Question about files in /usr/lib References: <20011225145811.A901@tisys.org> <20011225152007.A86639@klamath.local> <20011225163727.A350@tisys.org> <20011225170954.A91872@klamath.local> From: swear@blarg.net (Gary W. Swearingen) Date: 25 Dec 2001 12:20:10 -0800 In-Reply-To: <20011225170954.A91872@klamath.local> Message-ID: <07n107rr0l.107@localhost.localdomain> Lines: 7 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > They get installed if you want. I don't know about the presets on the > install (User, User + X, Minimal, etc); I always choose "custom selection" > of sets, and then I do not install the profiled libraries. IIRC, I select "User + X" or something, and then select custom, at which point I get a checklist of junk (some prechecked), one of which is the profiled libraries which I then uncheck. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 12:38:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f109.pav2.hotmail.com [64.4.37.109]) by hub.freebsd.org (Postfix) with ESMTP id 7105E37B417 for ; Tue, 25 Dec 2001 12:38:42 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 25 Dec 2001 12:38:42 -0800 Received: from 216.126.10.214 by pv2fd.pav2.hotmail.msn.com with HTTP; Tue, 25 Dec 2001 20:38:42 GMT X-Originating-IP: [216.126.10.214] From: "Andrei Cojocaru" To: freebsd-questions@FreeBSD.ORG Subject: Mouse Problems Date: Tue, 25 Dec 2001 13:38:42 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Dec 2001 20:38:42.0386 (UTC) FILETIME=[24185B20:01C18D84] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello everybody, I'm running FreeBSD 4.4. I installed XFree86, but the mouse driver doesn't seem to work (I used the computer without X before). I have MSI-6135 as a motherboard, I've enabled the PS/2 support in the BIOS. I have the psm driver compiled in the kernel (it's a Logitech PS/2 mouse). Anyways it does not seem to detect the mouse at all, and turning on PSM_DEBUG=2 in the kernel does not produce any extra output as why it cannot find the mouse. I think the motherboard is messed up or something. Any help would be appreciated. Thanks in advance. _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 13:30:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 31FE437B416 for ; Tue, 25 Dec 2001 13:30:44 -0800 (PST) Received: from colt.ncptiddische.net (ppp-132.wobline.de [212.68.69.140]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBPLUb822814 for ; Tue, 25 Dec 2001 22:30:37 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBPLWhX66288 for ; Tue, 25 Dec 2001 22:32:44 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBPLV8002562 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 22:31:08 +0100 (CET) (envelope-from nils) Date: Tue, 25 Dec 2001 22:30:33 +0100 From: Nils Holland To: freebsd-questions@freebsd.org Subject: fsck not cleaning all errors? Message-ID: <20011225223033.A2543@tisys.org> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 10:26PM up 9:11, 2 users, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I recently noticed the following behavior: I was in the process of copying a whole lot of files to a filesystem with softupdates turned on. During that operation, my machine crashed (this was more or less intentionally, as I did it for debugging purposes). Now, after the machine had rebooted, fsck ran. After fsck had seemingly solved all problems, the boot process continued and the machine resumed multi user operation. *However* when I did a "shutdown -now" just after the machine had fully booted and then unmounted my /usr filesystem and manually re-ran fsck on it, I received a report of a whole lot of incosistencies. Now, why is that so? I thought that the automatic boot-up fsck after the crash should have fixed my filesystem, so I don't understand why I get a lot of (correctable) errors when unmounting and fscking my filesystem a second time. Is there any logical explanation for this? Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 13:32:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from soda.csua.berkeley.edu (soda.CSUA.Berkeley.EDU [128.32.247.226]) by hub.freebsd.org (Postfix) with ESMTP id D51CC37B419 for ; Tue, 25 Dec 2001 13:32:34 -0800 (PST) Received: from localhost (mjm@localhost) by soda.csua.berkeley.edu (8.11.6/8.11.4) with ESMTP id fBPLWYJ70687 for ; Tue, 25 Dec 2001 13:32:34 -0800 (PST) (envelope-from joup@bigfoot.com) X-Authentication-Warning: soda.csua.berkeley.edu: mjm owned process doing -bs Date: Tue, 25 Dec 2001 13:32:34 -0800 (PST) From: Mark Miller X-X-Sender: mjm@soda.csua.berkeley.edu To: freebsd-questions@freebsd.org Subject: Samsung Yepp Portable MP3 Player (USB) Message-ID: <20011225132257.K69168-100000@soda.csua.berkeley.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Happy Holidays, I just received the above player (model YP-30S/XAA) and I'm hoping to use it w/ my freebsd machine. I've found a few binaries for use w/ the Rio and the MPMan in the ports tree, but none for this particular player. Can somebody point me toward a solution? Thanks, Mark ps- The online archive of freebsd-questions is down today, and it was the last time I needed it, which (I think) was several weeks ago. I might be unlucky, or maybe nobody knows about it. This list is listed as the maintainer for the page http://www.freebsd.org/search/search.html#mailinglists so maybe someone could confirm this as a (non)issue? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 13:45:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f195.law8.hotmail.com [216.33.241.195]) by hub.freebsd.org (Postfix) with ESMTP id E241B37B405 for ; Tue, 25 Dec 2001 13:45:54 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 25 Dec 2001 13:45:54 -0800 Received: from 208.7.67.87 by lw8fd.law8.hotmail.msn.com with HTTP; Tue, 25 Dec 2001 21:45:54 GMT X-Originating-IP: [208.7.67.87] From: "Dead Line" To: freebsd-questions@freebsd.org Subject: Languages Support. Date: Tue, 25 Dec 2001 21:45:54 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Dec 2001 21:45:54.0884 (UTC) FILETIME=[87A6B840:01C18D8D] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello there all, Is there any chance in the near future, that FreeBSD supports the IN/OUTput of some texts, Such as the Arabic Fonts? So we can use the FreeBSD even in our very small works, Office, IRC, letters, Emails which some of us, really depend on other lanaguges for such things. Beside I guess It will be a real Jump. Please When reply CC me. Thank you. Marwan Sultan, _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14: 9: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 54D9937B42A for ; Tue, 25 Dec 2001 14:09:00 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBPM8wf07808; Tue, 25 Dec 2001 23:08:58 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122523073112:2566 ; Tue, 25 Dec 2001 23:07:31 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBPMHTi37759; Tue, 25 Dec 2001 23:17:29 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Tue, 25 Dec 2001 23:17:29 +0100 From: Roman Neuhauser To: jacks@sage-american.com Cc: Joe & Fhe Barbish , FBSD Questions Subject: Re: Ports Midnight Commander Message-ID: <20011225231729.A850@roman.mobil.cz> Mail-Followup-To: jacks@sage-american.com, Joe & Fhe Barbish , FBSD Questions References: <3.0.5.32.20011224132528.01691728@mail.sage-american.com> Mime-Version: 1.0 In-Reply-To: <3.0.5.32.20011224132528.01691728@mail.sage-american.com> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/25/2001 11:07:31 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/25/2001 11:07:37 PM, Serialize complete at 12/25/2001 11:07:37 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Mon, 24 Dec 2001 13:25:28 -0600 > To: "Joe & Fhe Barbish" , > "FBSD Questions" > From: jacks@sage-american.com > Subject: Re: Ports Midnight Commander > > If, are using the right strartup file and if you didn't reboot, your OS > cannot see the executible yet.... just use the full path to the startup > file e.g., > #/usr/local/bin/startfile This is not true. The only problem with newly installed programs under FreeBSD is that the default shell, which is tcsh, uses an internal 'snapshot' of your $PATH and the files in it. This snapshot is created when the shell starts up. If you want to update it 'on the fly', just type 'rehash'. The operating system is not concerned at all. > At 12:45 PM 12.24.2001 -0500, Joe & Fhe Barbish wrote: > >I installed the ports Midnight Commander /usr/ports/misc/mc > >I rebooted and enter mc on the command line and get command not found. > >Them went to http://www.gnome.org/projects/mc/ to look for instructions on > >How to use and there were none. > > > >Anybody know how to start Midnight Commander or where the docs are? > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > Best regards, > Jack L. Stone, > Server Admin > > Sage-American > http://www.sage-american.com > jacks@sage-american.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- FreeBSD 4.4-STABLE 11:14PM up 3 days, 19:44, 11 users, load averages: 0.13, 0.05, 0.03 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:13:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mbox.com.au (203-134-146-019.cust.pth.iprimus.net.au [203.134.146.19]) by hub.freebsd.org (Postfix) with ESMTP id 2ED5D37B419 for ; Tue, 25 Dec 2001 14:13:08 -0800 (PST) Received: from nms2.mbox.com.au (webmail.i7mail.com.au [192.168.20.4]) by smtp2.mbox.com.au (Sun Internet Mail Server sims.4.0.2000.05.17.04.13.p6) with ESMTP id <0GOX00KE46WCE5@smtp2.mbox.com.au> for freebsd-questions@FreeBSD.ORG; Wed, 26 Dec 2001 06:09:48 +0800 (WST) Received: from mbox.com.au ([127.0.0.1]) by nms2.mbox.com.au (Netscape Messaging Server 4.15) with ESMTP id GOX6X301.1ZS for ; Wed, 26 Dec 2001 06:10:15 +0800 Date: Wed, 26 Dec 2001 09:10:15 +1100 From: BSD Freak Subject: IPFW and IPF To: FreeBSD Questions Message-id: <19642a1904d6.1904d619642a@mbox.com.au> MIME-version: 1.0 X-Mailer: Netscape Webmail Content-type: text/plain; charset=us-ascii Content-language: en Content-disposition: inline Content-transfer-encoding: 7BIT X-Accept-Language: en Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Does anyone have some OBJECTIVE advice in regard to choosing a firewalling package (IPF or IPFW). My experience so far has been mainly with Darren Reed's IP Filter. I have found it to be excellent (except for a few minor stability issues). Can anyone give me some TECHNICAL advise as to why I should IPFW over IPF or visa versa. Is IPFW a "stateful" firewall (ie does it track each estavlished connectection in a state table). Can I monitor this state table as I can with IPF's ipfstat? I have scoured the web for answers but have found very little. If someone could answer these questions or point me in the right direction I would be very appreciative...... Thanks all... --------------------------------------------------------------------- mBox makes you work Smarter, not Harder, from only $0.58 per WEEK! Visit http://www.mbox.com.au To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:13:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 5A77537B405 for ; Tue, 25 Dec 2001 14:13:16 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBPMDFf08080 for ; Tue, 25 Dec 2001 23:13:15 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122523114891:2569 ; Tue, 25 Dec 2001 23:11:48 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBPMLmo37776 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 23:21:48 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Tue, 25 Dec 2001 23:21:48 +0100 From: Roman Neuhauser To: freebsd-questions@freebsd.org Subject: Re: /usr/ports/ftp/wget make install error Message-ID: <20011225232148.B850@roman.mobil.cz> Mail-Followup-To: freebsd-questions@freebsd.org References: <5.1.0.14.0.20011224230328.03d0ad48@imap.3dresearch.com> Mime-Version: 1.0 In-Reply-To: <5.1.0.14.0.20011224230328.03d0ad48@imap.3dresearch.com> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/25/2001 11:11:49 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/25/2001 11:11:54 PM, Serialize complete at 12/25/2001 11:11:54 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Mon, 24 Dec 2001 23:17:52 -0500 > To: freebsd-questions@freebsd.org > From: web@3dresearch.com > Subject: /usr/ports/ftp/wget make install error > > I have attempted to install wget and I get this error message: > > /usr/ports/ftp/wget]# make install > ===> Building for wget-1.7_3 > cd src && gmake CC='cc' CPPFLAGS='' DEFS='-DHAVE_CONFIG_H > -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" > -DLOCALEDIR=\"/usr/local/share/locale\"' CFLAGS='-DINET6 -DINET6 -O -pipe ' > LDFLAGS='-L/usr/lib -R/usr/lib ' LIBS='-lintl -lssl -lcrypto ' > prefix='/usr/local' exec_prefix='/usr/local' bindir='/usr/local/bin' > infodir='/usr/local/info' mandir='/usr/local/man' manext='1' > gmake[1]: Entering directory `/usr/ports/ftp/wget/work/wget-1.7/src' > cc -I. -I. -I/usr/include -DHAVE_CONFIG_H > -DSYSTEM_WGETRC=\"/usr/local/etc/wgetrc\" > -DLOCALEDIR=\"/usr/local/share/locale\" -DINET6 -DINET6 -O -pipe -c cmpt.c > In file included from cmpt.c:36: > wget.h:44: libintl.h: No such file or directory > gmake[1]: *** [cmpt.o] Error 1 > gmake[1]: Leaving directory `/usr/ports/ftp/wget/work/wget-1.7/src' > gmake: *** [src] Error 2 > *** Error code 2 > > Stop in /usr/ports/ftp/wget. > *** Error code 1 > > Stop in /usr/ports/ftp/wget. > *** Error code 1 > > Stop in /usr/ports/ftp/wget. > *** Error code 1 > > Stop in /usr/ports/ftp/wget. > > The weird thing is that I do have /usr/local/include/libintl.h - so I don't > understand what is this error message about. AFAICT /usr/local/include is not sought for header files. You might want to update the ports tree to see if this is fixed, or try fixing it in your version... -- FreeBSD 4.4-STABLE 11:19PM up 3 days, 19:49, 11 users, load averages: 0.00, 0.03, 0.02 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:19:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pr93.lublin.sdi.tpnet.pl (pr93.lublin.sdi.tpnet.pl [217.97.36.93]) by hub.freebsd.org (Postfix) with ESMTP id 5F22137B416 for ; Tue, 25 Dec 2001 14:19:25 -0800 (PST) Received: (from doc@localhost) by pr93.lublin.sdi.tpnet.pl (8.11.6/8.11.6) id fBPMOfY31846 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 23:24:41 +0100 (CET) (envelope-from doc@lublin.t1.pl) Date: Tue, 25 Dec 2001 23:24:41 +0100 From: =?iso-8859-2?Q?Micha=B3?= Pasternak To: freebsd-questions@freebsd.org Subject: Dos -> Unix end-of-line conversion Message-ID: <20011225232440.A31837@lublin.t1.pl> Reply-To: =?iso-8859-2?Q?Micha=B3?= Pasternak Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Disposition: inline Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, are there any programs (in baseinstall) which allow that (except perl)? -- :: Micha³ Pasternak :: bazy danych, serwisy internetowe :: http://lublin.t1.pl :: +48606570000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:32:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-19.quicksilver.net.nz [202.89.142.19]) by hub.freebsd.org (Postfix) with ESMTP id B96C437B416 for ; Tue, 25 Dec 2001 14:32:23 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBPMWmT38573; Wed, 26 Dec 2001 11:32:48 +1300 (NZDT) (envelope-from jonc) Date: Wed, 26 Dec 2001 11:32:16 +1300 From: Jonathan Chen To: Michal Pasternak Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Dos -> Unix end-of-line conversion Message-ID: <20011226113216.A24782@grimoire.chen.org.nz> References: <20011225232440.A31837@lublin.t1.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225232440.A31837@lublin.t1.pl>; from doc@lublin.t1.pl on Tue, Dec 25, 2001 at 11:24:41PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 11:24:41PM +0100, Michal Pasternak wrote: > Hello, > > are there any programs (in baseinstall) which allow that (except perl)? $ tr -d '\r' < oldfile > newfile is one quick and dirty way to do it... -- Jonathan Chen ----------------------------------------------------------------------- "I love deadlines. I like the whooshing sound they make as they fly by" - Douglas Adams To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:36:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 2DD0837B416 for ; Tue, 25 Dec 2001 14:36:53 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Tue, 25 Dec 2001 17:39:01 -0500 From: "Joe & Fhe Barbish" To: "Lord Raiden" Cc: "FBSD Questions" Subject: RE: FreeBSD as a Firewall Date: Tue, 25 Dec 2001 17:36:49 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <4.2.0.58.20011121204753.0097f6b0@pop.netzero.net> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I can not get the url you listed to come up. Do you have another URL to get to it? http://www.schlacter.dyndns.org/public/FreeBSD-STABLE_and_IPFILTER.html -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Lord Raiden Sent: Wednesday, November 21, 2001 8:50 PM To: shanon loveridge; freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD as a Firewall Well I've used the following tutorial on a box almost exactly like yours (same processor speed and all that rubbish.) and I've found it to be both very stable and solid. Haven't had time to hammer it yet to see if there's any holes I missed, but for now it seems solid. Have a look. It's an awesome step by step beginners tutorial. :) http://www.schlacter.dyndns.org/public/FreeBSD-STABLE_and_IPFILTER.html At 11:38 PM 11/21/01 +0000, shanon loveridge wrote: >Ok I am thinking about setting up a P120 as a firewall >for my home network and I was wondering if the >computer will be fast enough for this or if there will >be a noticable drop in performance. Also would OpenBSD >be better suited for this as it is ment to focus on >security. > >Thanks people > >__________________________________________________ >Do You Yahoo!? >Everything you'll ever need on one web page from News and Sport to Email >and Music Charts >http://uk.my.yahoo.com > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 14:44:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hauan.org (dah.sharedcomm.net [205.235.129.203]) by hub.freebsd.org (Postfix) with ESMTP id B38C237B416 for ; Tue, 25 Dec 2001 14:44:09 -0800 (PST) Received: from hauan.org (localhost.hauan.org [127.0.0.1]) by hauan.org (8.11.6/8.11.6) with ESMTP id fBPEmYZ11857; Tue, 25 Dec 2001 14:49:16 GMT (envelope-from dah@hauan.org) Message-ID: <3C2891C2.8870766F@hauan.org> Date: Tue, 25 Dec 2001 14:48:34 +0000 From: "David A. Hauan" X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: =?iso-8859-1?Q?Micha=B3?= Pasternak Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Dos -> Unix end-of-line conversion References: <20011225232440.A31837@lublin.t1.pl> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG unix2dos in converters dave Micha³ Pasternak wrote: > > Hello, > > are there any programs (in baseinstall) which allow that (except perl)? > > -- > :: Micha³ Pasternak > :: bazy danych, serwisy internetowe > :: http://lublin.t1.pl > :: +48606570000 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15: 0:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ws1-2.us4.outblaze.com (205-158-62-54.outblaze.com [205.158.62.54]) by hub.freebsd.org (Postfix) with SMTP id 4FF2337B41A for ; Tue, 25 Dec 2001 15:00:37 -0800 (PST) Received: (qmail 45702 invoked by uid 1001); 25 Dec 2001 22:58:04 -0000 Message-ID: <20011225225804.45701.qmail@mail.com> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) Received: from ws1-2.us4.outblaze.com for [172.158.48.42] via web-mailer on Wed, 26 Dec 2001 06:58:04 +0800 From: "James J." To: freebsd-questions@FreeBSD.ORG Date: Wed, 26 Dec 2001 06:58:04 +0800 Subject: HELP!!!! Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ok i installed my cdr into my kernel then tried to restart after a 20 day uptime. i dont recall changing anything else over those 20 days. then i restart and my xwindows (kde) wont start i get the error out of swap space. then my comp reboots. happens every time. i cant seem to figure out whats wrong anyone have any ideas ? by the way the error usualy happens when it goes to initialize peripherals (the little keyboard and mouse picture) thanks -james -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15: 4:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 3BFC237B416 for ; Tue, 25 Dec 2001 15:04:12 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id fBPN49d08866; Tue, 25 Dec 2001 15:04:09 -0800 (PST) Message-Id: <200112252304.fBPN49d08866@ptavv.es.net> To: Julio Merino Cc: freebsd-questions@FreeBSD.ORG Subject: Re: portupgrade and XFree86-4 In-reply-to: Your message of "Tue, 25 Dec 2001 12:11:13 +0100." <20011225121113.A33958@klamath.local> Date: Tue, 25 Dec 2001 15:04:09 -0800 From: "Kevin Oberman" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Tue, 25 Dec 2001 12:11:13 +0100 > From: Julio Merino > Sender: owner-freebsd-questions@FreeBSD.ORG > > > --LZvS9be/3tNcYl/X > Content-Type: text/plain; charset=us-ascii > Content-Disposition: inline > Content-Transfer-Encoding: quoted-printable > > Hi all > > I've installed XFree86 4.1 from the x11/XFree86-4 port. I've started > playing with portupgrade, and wow! it is wonderful! :) > > But there is something that annoys me. Everytime I do a portinstall > of a port that depends on X, it registers dependancies to imake and > XFree86-4-libraries. Then, I've to run 'pkgdb -F' to correct these > dependancies by hand, and I make them to point to XFree86-4. > > Is it there any way to do this automagically? As I understand it, this will fix itself in the future. At the moment there are two ways to install XFree86: As a complete package with servers, clients, fonts, and libraries or as individual bits a pieces as is required by your installation. I believe the plan is to convert the XFree86-4 port to a container, similar to KDE and gnome which will then install all of the pieces. Once that takes place, installing XFree86-4 will result in the installation of XFree86-4-libraries (as well as several other ports/packages) and portupgrade will then be happy. Until then, selecting "all" to the question the first time pkgdb asks it is about the best you can do. :-( R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15: 5:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from amsfep15-int.chello.nl (amsfep15-int.chello.nl [213.46.243.27]) by hub.freebsd.org (Postfix) with ESMTP id D2FF737B416 for ; Tue, 25 Dec 2001 15:05:08 -0800 (PST) Received: from boss ([213.93.134.174]) by amsfep15-int.chello.nl (InterMail vM.5.01.03.06 201-253-122-118-106-20010523) with SMTP id <20011225230502.QFXI29228.amsfep15-int.chello.nl@boss> for ; Wed, 26 Dec 2001 00:05:02 +0100 From: "Rick Hoppe" To: Subject: RE: FreeBSD as a Firewall Date: Wed, 26 Dec 2001 00:04:56 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, The correct URL's are: http://www.schlacter.net:8500/public/FreeBSD-STABLE_and_IPFILTER.html http://www.schlacter.dyndns.org:8500/public/FreeBSD-STABLE_and_IPFILTER.html http://www.securiteam.com/unixfocus/5WP050A4AK.html I'm also setting up a firewall using this doc. It works fine as a gateway to the outside world for my internal network, and it also works fine as a firewall. But the ipnat.rules file is giving me a headache.....some weird syntax error messages about rdr. I'm still trying to fix that, so there's a lot of traffic to Google from here :-) (Maybe I should post this problem myself eventually) Regards, Rick Hoppe Network- and System Specialist (Jr.) Xtraxion Internet > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Joe & Fhe > Barbish > Sent: dinsdag 25 december 2001 23:37 > To: Lord Raiden > Cc: FBSD Questions > Subject: RE: FreeBSD as a Firewall > > > I can not get the url you listed to come up. Do you have another > URL to get > to it? > http://www.schlacter.dyndns.org/public/FreeBSD-STABLE_and_IPFILTER.html > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Lord Raiden > Sent: Wednesday, November 21, 2001 8:50 PM > To: shanon loveridge; freebsd-questions@FreeBSD.ORG > Subject: Re: FreeBSD as a Firewall > > Well I've used the following tutorial on a box almost > exactly like > yours (same processor speed and all that rubbish.) and I've found it to be > both very stable and solid. Haven't had time to hammer it yet to see if > there's any holes I missed, but for now it seems solid. Have a > look. It's > an awesome step by step beginners tutorial. :) > > http://www.schlacter.dyndns.org/public/FreeBSD-STABLE_and_IPFILTER.html > > At 11:38 PM 11/21/01 +0000, shanon loveridge wrote: > >Ok I am thinking about setting up a P120 as a firewall > >for my home network and I was wondering if the > >computer will be fast enough for this or if there will > >be a noticable drop in performance. Also would OpenBSD > >be better suited for this as it is ment to focus on > >security. > > > >Thanks people > > > >__________________________________________________ > >Do You Yahoo!? > >Everything you'll ever need on one web page from News and Sport to Email > >and Music Charts > >http://uk.my.yahoo.com > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15:34:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id BCEBF37B419 for ; Tue, 25 Dec 2001 15:34:46 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOXAXT02.IU7 for ; Wed, 26 Dec 2001 00:37:05 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GOXAN601.RC2 for ; Wed, 26 Dec 2001 00:30:42 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBPNbUv11960 for freebsd-questions@FreeBSD.ORG; Wed, 26 Dec 2001 00:37:30 +0100 (CET) (envelope-from juli) Date: Wed, 26 Dec 2001 00:37:30 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: portupgrade and XFree86-4 Message-ID: <20011226003730.A11520@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011225121113.A33958@klamath.local> <200112252304.fBPN49d08866@ptavv.es.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="82I3+IH0IqGh5yIs" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200112252304.fBPN49d08866@ptavv.es.net>; from oberman@es.net on Tue, Dec 25, 2001 at 03:04:09PM -0800 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Dec 25, 2001 at 03:04:09PM -0800, Kevin Oberman wrote: >=20 > As I understand it, this will fix itself in the future. Well, I'll be waiting :) >=20 > At the moment there are two ways to install XFree86: As a complete > package with servers, clients, fonts, and libraries or as individual > bits a pieces as is required by your installation. If I install from a single package is because I'm too lazy to wait it to finish. I tried it sometime and each package needs lots of time to be built. At least, the single package only takes 5-6 hours... Oh! ;) >=20 > I believe the plan is to convert the XFree86-4 port to a container, > similar to KDE and gnome which will then install all of the > pieces. Once that takes place, installing XFree86-4 will result in the > installation of XFree86-4-libraries (as well as several other > ports/packages) and portupgrade will then be happy. Until then, > selecting "all" to the question the first time pkgdb asks it is about > the best you can do. :-( Well, that would be ok if pkgdb would remember my choice. The problem=20 is that anytime I install new X programs, I have to redo 'pkgdb -F' to fix their bad dependancies. Thanks anyway! >=20 > R. Kevin Oberman, Network Engineer > Energy Sciences Network (ESnet) > Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) > E-mail: oberman@es.net Phone: +1 510 486-8634 --=20 La ignorancia es la felicidad. Julio Merino (Slink) --82I3+IH0IqGh5yIs Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8KQ25zz00ZOPKycwRAgoZAJ4iYqk64X+ktDLQOXbcfNRqA6tsiQCggRKT LTVo6scLCr0cOUWx6fw7E/8= =ljSF -----END PGP SIGNATURE----- --82I3+IH0IqGh5yIs-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15:46:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from imo-m09.mx.aol.com (imo-m09.mx.aol.com [64.12.136.164]) by hub.freebsd.org (Postfix) with ESMTP id 82B4437B405 for ; Tue, 25 Dec 2001 15:46:42 -0800 (PST) Received: from Vitman3852@aol.com by imo-m09.mx.aol.com (mail_out_v31_r1.9.) id n.6b.1ff8c985 (3981) for ; Tue, 25 Dec 2001 18:46:39 -0500 (EST) From: Vitman3852@aol.com Message-ID: <6b.1ff8c985.295a69df@aol.com> Date: Tue, 25 Dec 2001 18:46:39 EST Subject: Boot Manager - can it be removed? To: FreeBSD-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_6b.1ff8c985.295a69df_boundary" X-Mailer: AOL 6.0 for Windows US sub 10552 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_6b.1ff8c985.295a69df_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Is there any wasy to remove the boot manager once it's installed? something has gone wrong with my boot manager and I can't boot my machine. I can't over-write it and cant seem to delete it. any suggestions appreciated, dave --part1_6b.1ff8c985.295a69df_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit Is there any wasy to remove the boot manager once it's installed?  something has gone wrong with my boot manager and I can't boot my machine.  I can't over-write it and cant seem to delete it.

any suggestions appreciated,
dave --part1_6b.1ff8c985.295a69df_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 15:56:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 5927E37B41A for ; Tue, 25 Dec 2001 15:56:15 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBPNu7x17899 for ; Wed, 26 Dec 2001 01:56:09 +0200 Message-Id: <200112252356.fBPNu7x17899@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: vmware2 Date: Tue, 25 Dec 2001 23:56:08 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How can I obtain the license key for VMware-2.0.4? vmware.com offers a free trial key but for another version :( (I tried and didnt succeed) thanks a lot. --uwi mAn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16: 5: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.retemail.es (smtp04.iddeo.es [62.81.186.14]) by hub.freebsd.org (Postfix) with ESMTP id 6D56E37B405 for ; Tue, 25 Dec 2001 16:04:59 -0800 (PST) Received: from 197-BARC-X9.red.retevision.es ([62.174.72.197]) by smtp04.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with ESMTP id <20011226000457.JFEY4561.smtp04.retemail.es@197-BARC-X9.red.retevision.es> for ; Wed, 26 Dec 2001 01:04:57 +0100 Subject: Basic question on using portupgrade From: "F. Xavier Noria" To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0 (Preview Release) Date: 26 Dec 2001 01:03:50 +0100 Message-Id: <1009325032.85850.0.camel@conway.localdomain> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am learning to keep ports up-to-date with portupgrade and am not sure about when one should use the -R or -r flags. The documentation explains what they do, but given an outdated port on what basis does one decide that -r or -R must be used? For instance, let's suppose portversion | grep '<' gives imlib < ispell < jpeg < libglade < Those are libraries and programs, what would you take into account or what information would you consult to know if -r or -R need to be used for each of them? Thank you very much, -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16:21:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id F222537B416 for ; Tue, 25 Dec 2001 16:21:21 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id fBQ0LId21909; Tue, 25 Dec 2001 16:21:18 -0800 (PST) Message-Id: <200112260021.fBQ0LId21909@ptavv.es.net> To: "F. Xavier Noria" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Basic question on using portupgrade In-reply-to: Your message of "26 Dec 2001 01:03:50 +0100." <1009325032.85850.0.camel@conway.localdomain> Date: Tue, 25 Dec 2001 16:21:18 -0800 From: "Kevin Oberman" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > From: "F. Xavier Noria" > Date: 26 Dec 2001 01:03:50 +0100 > Sender: owner-freebsd-questions@FreeBSD.ORG > > I am learning to keep ports up-to-date with portupgrade and am > not sure about when one should use the -R or -r flags. > > The documentation explains what they do, but given an outdated > port on what basis does one decide that -r or -R must be used? > For instance, let's suppose portversion | grep '<' gives > > imlib < > ispell < > jpeg < > libglade < > > Those are libraries and programs, what would you take into account > or what information would you consult to know if -r or -R need to > be used for each of them? FWIW, I have never seen any reason to NOT run with -Rr. I'm not sure why these are not the defaults, though. I tend to rebuild the more fundamental libraries first and let them take care of the user-level apps, but YMMV. There is no clear advantage to doing it that way over doing it the other way around. The -f option is useful when something won't build, but it can take a long, long time to rebuild all the dependency stuff in both directions. Only for use when you have real reason to think some packages may be messed up and all else fails. (If nothing else, it's almost certain to rebuild XFree86 for anything slightly graphical in nature. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16:23:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from segfault.monkeys.com (246.dsl6660157.rstatic.surewest.net [66.60.157.246]) by hub.freebsd.org (Postfix) with ESMTP id C089237B417 for ; Tue, 25 Dec 2001 16:23:18 -0800 (PST) Received: from monkeys.com (localhost [127.0.0.1]) by segfault.monkeys.com (Postfix) with ESMTP id 6E54E6397 for ; Tue, 25 Dec 2001 16:23:18 -0800 (PST) To: freebsd-questions@freebsd.org Subject: /etc/ftpaccess, chroot, and `guest-root' directive. Date: Tue, 25 Dec 2001 16:23:18 -0800 Message-ID: <39549.1009326198@monkeys.com> From: "Ronald F. Guilmette" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I put the following line into my /etc/ftpaccess file: guest-root ~ but it did not seem to have the desired effect. It fact, it did not seem to have any effect at all. How come? My hope was that this directive, when placed into my /etc/ftpaccess file, would cause each ftp login session to be chroot'd to the home directory of the specific user who had just logged in, but this doesn't seem to be happening. Why not? From the ftpd man page: Ftpd interprets file names according to the ``globbing'' conventions used by csh(1)... Ok, so why isn't it doing the ``globbing'' in the case of the guest-root directive as expected? Anyway, if there is some different way of achieving the desired effect, I would love to be educated about it. I think that it's clear what I want to do... I just want to insure that each and every ftp user is well and truly isolated from all other ftp users (and from the rest of the system). That's not too much to ask, is it? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16:27:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 8E1D237B405 for ; Tue, 25 Dec 2001 16:27:45 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBQ0Rix19233 for ; Wed, 26 Dec 2001 02:27:44 +0200 Message-Id: <200112260027.fBQ0Rix19233@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: ksnes9x not in distfiles Date: Wed, 26 Dec 2001 00:27:44 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I was browsing ports and found pretty a nice frontend for Snes9x, I looked thru distfiles section (ftp.freebsd.org/pub/FreeBSD/ports/distfiles) and didn't fine KSnes9x tgz file (ksnes9x-1.2.tar.gz) Why? I used to grab files off there and installing them manually, pretty convenient and my FreeBSD box doesnt have a direct inet connection, that's what the fuss about :) P.S. Im having difficulties compiling the source.... thats why I'm such in desperate hurry. heres what i got while the source compiles: ....... checking for Qt...configure:error: Qt(>=2.0) (headers and libraries) not found. tho I use Qt v2.3.1 thank you --uwi mAn. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16:49:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 19BF837B405 for ; Tue, 25 Dec 2001 16:49:26 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBQ0nEx20047 for ; Wed, 26 Dec 2001 02:49:15 +0200 Message-Id: <200112260049.fBQ0nEx20047@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: OpenGL Date: Wed, 26 Dec 2001 00:49:14 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Say, I have a P3 class machine with an Nvidia Geforce2 card equipped, 384 megs of ram and the Linux quake2 binary. running the thing of course under FreeBSD 4.4 Rel. What my chances? What can I do? Thanks. P.S. Besides than running it using vmware and alike. --uwi mAn. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 16:54:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id DA3DC37B625 for ; Tue, 25 Dec 2001 16:54:36 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 83DAD786E7; Wed, 26 Dec 2001 11:24:33 +1030 (CST) Date: Wed, 26 Dec 2001 11:24:33 +1030 From: Greg Lehey To: Vitman3852@aol.com Cc: FreeBSD-questions@freebsd.org Subject: Re: Boot Manager - can it be removed? Message-ID: <20011226112433.B4576@monorchid.lemis.com> References: <6b.1ff8c985.295a69df@aol.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <6b.1ff8c985.295a69df@aol.com> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, 25 December 2001 at 18:46:39 -0500, Vitman3852@aol.com wrote: > Is there any wasy to remove the boot manager once it's installed? something > has gone wrong with my boot manager and I can't boot my machine. I can't > over-write it and cant seem to delete it. Sure you can, but do you want to? Based on this input, there's nothing to suggest that the boot manager is to blame. And what do you want to replace it with? Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 17:28:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id D224137B405 for ; Tue, 25 Dec 2001 17:28:47 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBQ1Sff24294 for ; Wed, 26 Dec 2001 02:28:41 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122602271393:2614 ; Wed, 26 Dec 2001 02:27:13 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBQ1bE338752 for freebsd-questions@freebsd.org; Wed, 26 Dec 2001 02:37:14 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Wed, 26 Dec 2001 02:37:13 +0100 From: Roman Neuhauser To: freebsd-questions Subject: .maildroprc glitch Message-ID: <20011226023713.D850@roman.mobil.cz> Mail-Followup-To: freebsd-questions Mime-Version: 1.0 User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 02:27:14 AM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 02:27:20 AM, Serialize complete at 12/26/2001 02:27:20 AM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi there, having this in my .maildroprc: if (/^Precedence: list/ || \ /^Precedence: bulk/ || \ /^List-ID:/ || \ /^List-Post:/ || \ /^List-Unsubscribe:/) { `reformail -D 8192 $RCDIR/duplicate.cache` if ($RETURNCODE == 0) { xfilter "reformail -i'X-Reformail: duplicate'" } } results in this in my getmail_log: 23_Dec_2001_18:05:02_-0000 getmail started for neuhauser@localhost:10110 23_Dec_2001_18:05:02_-0000 POP3 connect for neuhauser on localhost:10110 (+OK Lotus Notes POP3 server version X2.0 ready on ester/Mobil.) 23_Dec_2001_18:05:02_-0000 POP3 login successful 23_Dec_2001_18:05:03_-0000 POP3 list (+OK 4 messages.) 23_Dec_2001_18:05:03_-0000 retrieved message "7E5BEC233AF38449C1256B2B005E2C13" 23_Dec_2001_18:05:03_-0000 new message "<20011223181739.W850@roman.mobil.cz>": from <<#@[]>> 23_Dec_2001_18:05:03_-0000 Aborting... (command "/usr/bin/env PERSONA=mobil.cz maildrop /home/roman/.mail/maildrop/maildroprc" returned 0 (0: Event not found.)) I'm using getmail-2.1.5. What puzzled me is that neither getmail nor maildrop nor reformail contains the string "event". Or at least I haven't found it. So, two questions: 1) Where does this message come from? 2) What's wrong with the rule? -- FreeBSD 4.4-STABLE 1:43AM up 3 days, 22:13, 11 users, load averages: 0.02, 0.04, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 17:51: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id E517F37B417 for ; Tue, 25 Dec 2001 17:51:03 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Tue, 25 Dec 2001 20:53:12 -0500 From: "Joe & Fhe Barbish" To: "Jonathan Chen" Cc: "FBSD Questions" Subject: RE: Dos -> Unix end-of-line conversion Date: Tue, 25 Dec 2001 20:51:01 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <20011226113216.A24782@grimoire.chen.org.nz> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How can I get this command to roll through a directory tree processing all the files to feed this $ tr -d '\r' < oldfile > newfile command converting dos2unix or unix2dos? There is a dos2unix / unix2dos port but it only does one file at a time. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jonathan Chen Sent: Tuesday, December 25, 2001 5:32 PM To: Michal Pasternak Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Dos -> Unix end-of-line conversion On Tue, Dec 25, 2001 at 11:24:41PM +0100, Michal Pasternak wrote: > Hello, > > are there any programs (in baseinstall) which allow that (except perl)? $ tr -d '\r' < oldfile > newfile is one quick and dirty way to do it... -- Jonathan Chen ----------------------------------------------------------------------- "I love deadlines. I like the whooshing sound they make as they fly by" - Douglas Adams To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18: 4:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hauan.org (dah.sharedcomm.net [205.235.129.203]) by hub.freebsd.org (Postfix) with ESMTP id D039137B416 for ; Tue, 25 Dec 2001 18:04:26 -0800 (PST) Received: from hauan.org (localhost.hauan.org [127.0.0.1]) by hauan.org (8.11.6/8.11.6) with ESMTP id fBPI9pZ12446; Tue, 25 Dec 2001 18:09:52 GMT (envelope-from dah@hauan.org) Message-ID: <3C28C0EE.BC8EDFE4@hauan.org> Date: Tue, 25 Dec 2001 18:09:50 +0000 From: Dave X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Joe & Fhe Barbish Cc: Jonathan Chen , FBSD Questions Subject: Re: Dos -> Unix end-of-line conversion References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Joe & Fhe Barbish wrote: > > How can I get this command to roll through a directory tree processing all > the files to feed this $ tr -d '\r' < oldfile > newfile command converting > dos2unix or unix2dos? There is a dos2unix / unix2dos port but it only does > one file at a time. > unix2dos *.txt will do all textfiles. If you can't see it with less or more vi will show you. dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18: 9: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id A789137B41B for ; Tue, 25 Dec 2001 18:09:04 -0800 (PST) Received: from sdn-ar-007dcwashp252.dialsprint.net ([63.178.90.142] helo=moo.holy.cow) by hawk.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16J3V6-0006EA-00 for freebsd-questions@FreeBSD.ORG; Tue, 25 Dec 2001 18:09:01 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id AC6F750E29; Tue, 25 Dec 2001 21:10:55 -0500 (EST) Date: Tue, 25 Dec 2001 21:10:55 -0500 From: parv To: freebsd-questions@FreeBSD.ORG Subject: Re: Basic question on using portupgrade Message-ID: <20011225211055.A55635@moo.holy.cow> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <1009325032.85850.0.camel@conway.localdomain> <200112260021.fBQ0LId21909@ptavv.es.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200112260021.fBQ0LId21909@ptavv.es.net>; from oberman@es.net on Tue, Dec 25, 2001 at 04:21:18PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message <200112260021.fBQ0LId21909@ptavv.es.net>, wrote Kevin Oberman thusly... > > FWIW, I have never seen any reason to NOT run with -Rr. I'm not sure > why these are not the defaults, though. ... i for one not want to wait for portupgrade to take long time[0] to finish by default. 0: depends on a particular port, of course. -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:15:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 5836937B416 for ; Tue, 25 Dec 2001 18:15:40 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Tue, 25 Dec 2001 21:17:50 -0500 From: "Joe & Fhe Barbish" To: "Dave" Cc: "FBSD Questions" Subject: RE: Dos -> Unix end-of-line conversion Date: Tue, 25 Dec 2001 21:15:37 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <3C28C0EE.BC8EDFE4@hauan.org> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I want to roll the /etc/ tree files with all kinds of txt files but text in content only, not in file names, and convert them in mass on there way to the floppy drive that's going to a windows sys. How can I do this on the command line? -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Dave Sent: Tuesday, December 25, 2001 1:10 PM To: Joe & Fhe Barbish Cc: Jonathan Chen; FBSD Questions Subject: Re: Dos -> Unix end-of-line conversion Joe & Fhe Barbish wrote: > > How can I get this command to roll through a directory tree processing all > the files to feed this $ tr -d '\r' < oldfile > newfile command converting > dos2unix or unix2dos? There is a dos2unix / unix2dos port but it only does > one file at a time. > unix2dos *.txt will do all textfiles. If you can't see it with less or more vi will show you. dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:19:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 1004237B416 for ; Tue, 25 Dec 2001 18:19:45 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Tue, 25 Dec 2001 21:21:54 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: RE: Ports Midnight Commander Date: Tue, 25 Dec 2001 21:19:41 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG MY original problem was I was using the wrong command to start it. I checked the port pkg-comment for info on the port and there was nothing about how to start it. I just guessed on nc. I had done a rehash but it didn't help of course. Once someone told me midc was the name on FBSD I got it started. The only problem I am having now is I can not get the mouse to work in midc. Yes mouse is in the rc.conf. The FAQ say 3.1 How do I enable mouse support? Invoke midc like this (without quotes): "midc -x". If this doesn't work upgrade to a terminal which is compatible with the Xterm mouse sequences. Alternatively, on Linux console you can use gpm. Same results starting with midc -x as with out the -x, mouse does not work. What do I have to do to make the master root console to act like a xterm Terminal which is compatible with the Xterm mouse sequences?. -----Original Message----- From: Roman Neuhauser [mailto:neuhauser@mobil.cz] Sent: Tuesday, December 25, 2001 5:17 PM To: jacks@sage-american.com Cc: Joe & Fhe Barbish; FBSD Questions Subject: Re: Ports Midnight Commander > Date: Mon, 24 Dec 2001 13:25:28 -0600 > To: "Joe & Fhe Barbish" , > "FBSD Questions" > From: jacks@sage-american.com > Subject: Re: Ports Midnight Commander > > If, are using the right strartup file and if you didn't reboot, your OS > cannot see the executible yet.... just use the full path to the startup > file e.g., > #/usr/local/bin/startfile This is not true. The only problem with newly installed programs under FreeBSD is that the default shell, which is tcsh, uses an internal 'snapshot' of your $PATH and the files in it. This snapshot is created when the shell starts up. If you want to update it 'on the fly', just type 'rehash'. The operating system is not concerned at all. > At 12:45 PM 12.24.2001 -0500, Joe & Fhe Barbish wrote: > >I installed the ports Midnight Commander /usr/ports/misc/mc > >I rebooted and enter mc on the command line and get command not found. > >Them went to http://www.gnome.org/projects/mc/ to look for instructions on > >How to use and there were none. > > > >Anybody know how to start Midnight Commander or where the docs are? > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:39: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 4AF8537B41B for ; Tue, 25 Dec 2001 18:38:58 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id SAA25586; Tue, 25 Dec 2001 18:38:56 -0800 Message-ID: <3C29383F.2060008@owt.com> Date: Tue, 25 Dec 2001 18:38:55 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: parv Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Basic question on using portupgrade References: <1009325032.85850.0.camel@conway.localdomain> <200112260021.fBQ0LId21909@ptavv.es.net> <20011225211055.A55635@moo.holy.cow> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG parv wrote: > in message <200112260021.fBQ0LId21909@ptavv.es.net>, > wrote Kevin Oberman thusly... > >>FWIW, I have never seen any reason to NOT run with -Rr. I'm not sure >>why these are not the defaults, though. >> > ... > > i for one not want to wait for portupgrade to take long time[0] to > finish by default. At times you really do not have much of a choice. For example, upgrade png from one of the old versions and then try to run KDE-2.2.2. Most of the time, you will either end up with really strange looking images (buttons and etc) or kde will simply not run. If you tell portupgrade to update all of the dependencies fanning off of png, you will have to wait for a long time for them to build. I think it currently takes 4 hours on my AMD 1600+ XP to just build kde-2.2.2. If I build kde using "make package" in parallel on 2 or 3 systems and use pkg_add on the systems that didn't build a package, it is much faster but I can't use portupgrade to do this. You can tell portupgrade to only use packages but then the packages you want it to use had better have been build with the current png. This doesn't happen over night. The port upgrade to png will typically appear several days before all of the dependent programs have been rebuilt. You sill have to wait for the updated package to make it to your ftp mirror. Portupgrade will protect your environment but it comes at a cost. Kent > > > 0: depends on a particular port, of course. > > -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:39:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20501.mail.yahoo.com (web20501.mail.yahoo.com [216.136.226.136]) by hub.freebsd.org (Postfix) with SMTP id 03B8D37B405 for ; Tue, 25 Dec 2001 18:39:38 -0800 (PST) Message-ID: <20011226023937.94228.qmail@web20501.mail.yahoo.com> Received: from [63.15.72.25] by web20501.mail.yahoo.com via HTTP; Tue, 25 Dec 2001 18:39:37 PST Date: Tue, 25 Dec 2001 18:39:37 -0800 (PST) From: Robin Hall Subject: RE: device not configured To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok i finally was able to get this copied over. This is the dmesg from the section on setting up the modem: m0: irq 12 on atkbdc0 PS/2: No such file or directory. psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 guardian# psm0: model Generic PS/2 mouse, device ID 0 psm0:: Too many arguments. from what I see sio1 it the setup for my modem port. This is the correct irq and address for it. If this is showing in dmesg as being set up how come when I use cuaa2 it is telling me device not configured? This is the generic kernel no configuration. When I use the setup program I don't even get the optioon to setup ppp0 on the right port? anyone have any ideas? TIA ===== Robin E. Hall rob33_me@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:41:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 088F237B417 for ; Tue, 25 Dec 2001 18:41:49 -0800 (PST) Received: from sdn-ar-007dcwashp216.dialsprint.net ([63.178.90.130] helo=moo.holy.cow) by hawk.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16J40p-0004J4-00; Tue, 25 Dec 2001 18:41:48 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id A6DD350E29; Tue, 25 Dec 2001 21:42:42 -0500 (EST) Date: Tue, 25 Dec 2001 21:42:42 -0500 From: parv To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: Dos -> Unix end-of-line conversion Message-ID: <20011225214242.B55635@moo.holy.cow> Mail-Followup-To: Joe & Fhe Barbish , FBSD Questions References: <20011226113216.A24782@grimoire.chen.org.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: ; from barbish@a1poweruser.com on Tue, Dec 25, 2001 at 08:51:01PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message , wrote Joe & Fhe Barbish thusly... > > How can I get this command to roll through a directory tree processing all > the files to feed this $ tr -d '\r' < oldfile > newfile command converting > dos2unix or unix2dos? There is a dos2unix / unix2dos port but it only does > one file at a time. you definitely need to see find(1), sh(1), test(1). in the meantime, if you are using ksh/sh/bash this should work w/ not much fiddling (partially tested in bash)... find -type f | while read Old do # this needs to be more sophisticated; but something is better than # nothing # if ( ! file "$Old" | grep 'text' >/dev/null 2>&1 ) \ || [ ! -f "$Old" -a -r "$Old" -a ! -L "$Old" ] then echo '* ' $Old 'may not be a text file or not readable; skipping...' continue fi echo ' -- sanitizing ' $Old tr -d '\r' < "$Old" > "${Old}.changed" # optionally remove old files, keep only changed ones # #mv -f "${Old}.changed" "$Old" done -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:41:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pr93.lublin.sdi.tpnet.pl (pr93.lublin.sdi.tpnet.pl [217.97.36.93]) by hub.freebsd.org (Postfix) with ESMTP id 2186C37B419; Tue, 25 Dec 2001 18:41:51 -0800 (PST) Received: (from doc@localhost) by pr93.lublin.sdi.tpnet.pl (8.11.6/8.11.6) id fBQ2l5i42994; Wed, 26 Dec 2001 03:47:05 +0100 (CET) (envelope-from doc@lublin.t1.pl) Date: Wed, 26 Dec 2001 03:47:05 +0100 From: =?iso-8859-2?Q?Micha=B3?= Pasternak To: freebsd-questions@freebsd.org, freebsd-ports@freebsd.org Subject: Porting & Makefiles Message-ID: <20011226034704.A42977@lublin.t1.pl> Reply-To: =?iso-8859-2?Q?Micha=B3?= Pasternak Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Disposition: inline Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I'm doing a port. It seems, that I have to make a completly new makefile. Which option is better ? - I use diff and create a big patch in ./files/ - I use DISTFILES and fetch a new, .bzipped Makefile from another site. -- :: Micha³ Pasternak :: bazy danych, serwisy internetowe :: http://lublin.t1.pl :: +48606570000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 18:58:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id C9ED037B405 for ; Tue, 25 Dec 2001 18:58:09 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBQ2w8f18815 for ; Wed, 26 Dec 2001 03:58:08 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122603564126:2630 ; Wed, 26 Dec 2001 03:56:41 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBQ36fN39720 for questions@FreeBSD.ORG; Wed, 26 Dec 2001 04:06:41 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Wed, 26 Dec 2001 04:06:41 +0100 From: Roman Neuhauser To: FBSD Questions Subject: Re: Dos -> Unix end-of-line conversion Message-ID: <20011226040641.I850@roman.mobil.cz> Mail-Followup-To: FBSD Questions References: <20011226113216.A24782@grimoire.chen.org.nz> Mime-Version: 1.0 In-Reply-To: User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 03:56:41 AM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 03:56:47 AM, Serialize complete at 12/26/2001 03:56:47 AM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > From: "Joe & Fhe Barbish" > To: "Jonathan Chen" > Cc: "FBSD Questions" > Subject: RE: Dos -> Unix end-of-line conversion > Date: Tue, 25 Dec 2001 20:51:01 -0500 > > How can I get this command to roll through a directory tree processing all > the files to feed this $ tr -d '\r' < oldfile > newfile command converting > dos2unix or unix2dos? There is a dos2unix / unix2dos port but it only does > one file at a time. By plugging it into find(1): find /somewhere -iregex '.*\.txt' -exec tr -d '\r' < {} > {}.new \; > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jonathan Chen > Sent: Tuesday, December 25, 2001 5:32 PM > To: Michal Pasternak > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: Dos -> Unix end-of-line conversion > > On Tue, Dec 25, 2001 at 11:24:41PM +0100, Michal Pasternak wrote: > > Hello, > > > > are there any programs (in baseinstall) which allow that (except perl)? > > $ tr -d '\r' < oldfile > newfile > > is one quick and dirty way to do it... > -- > Jonathan Chen > ----------------------------------------------------------------------- > "I love deadlines. I like the whooshing sound they make as they fly by" > - Douglas Adams > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- FreeBSD 4.4-STABLE 4:04AM up 4 days, 34 mins, 9 users, load averages: 0.04, 0.02, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19: 2:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 3347537B417 for ; Tue, 25 Dec 2001 19:02:08 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBQ327f19013 for ; Wed, 26 Dec 2001 04:02:07 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122604003997:2631 ; Wed, 26 Dec 2001 04:00:39 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBQ3Afb39749 for questions@FreeBSD.ORG; Wed, 26 Dec 2001 04:10:41 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Wed, 26 Dec 2001 04:10:40 +0100 From: Roman Neuhauser To: FBSD Questions Subject: Re: Ports Midnight Commander Message-ID: <20011226041040.J850@roman.mobil.cz> Mail-Followup-To: FBSD Questions References: <20011225231729.A850@roman.mobil.cz> Mime-Version: 1.0 In-Reply-To: User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 04:00:39 AM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 04:00:45 AM, Serialize complete at 12/26/2001 04:00:45 AM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > From: "Joe & Fhe Barbish" > To: "Roman Neuhauser" > Cc: "FBSD Questions" > Subject: RE: Ports Midnight Commander > Date: Tue, 25 Dec 2001 21:07:19 -0500 > > The only problem I am having now is I can not get the mouse to work in midc. > Yes mouse is in the rc.conf. > > The FAQ say > 3.1 How do I enable mouse support? > Invoke midc like this (without quotes): "midc -x". If this doesn't work > upgrade to a terminal which is compatible with the Xterm mouse sequences. > Alternatively, on Linux console you can use gpm. > > Same results starting with midc -x as with out the -x, mouse does not work. > What do I have to do to make the master root console to act like a xterm > Terminal which is compatible with the Xterm mouse sequences?. Sorry, I don't use midc. -- FreeBSD 4.4-STABLE 4:09AM up 4 days, 39 mins, 9 users, load averages: 0.00, 0.01, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19: 5:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id D504537B41B for ; Tue, 25 Dec 2001 19:05:26 -0800 (PST) Received: from sdn-ar-007dcwashp023.dialsprint.net ([63.178.91.31] helo=moo.holy.cow) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16J4Ni-00016x-00 for freebsd-questions@freebsd.org; Tue, 25 Dec 2001 19:05:26 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id C11A550E29; Tue, 25 Dec 2001 22:07:21 -0500 (EST) Date: Tue, 25 Dec 2001 22:07:21 -0500 From: parv To: f-q Subject: Re: Dos -> Unix end-of-line conversion Message-ID: <20011225220721.C55635@moo.holy.cow> Mail-Followup-To: f-q References: <20011226113216.A24782@grimoire.chen.org.nz> <20011225214242.B55635@moo.holy.cow> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011225214242.B55635@moo.holy.cow>; from parv_@yahoo.com on Tue, Dec 25, 2001 at 09:42:42PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG alternatively, combine symlink checking in 'find', liberating 2 checks from the while loop/if condition. this could have been further modified to remove the "file readable" test, but i preferred to be notified about non-text/unreadable files. find \( -type f -a ! -type l \) | while read Old do # this needs to be more sophisticated; but something is better than # nothing # if ( ! file "$Old" | grep 'text' >/dev/null 2>&1 ) \ || [ ! -r "$Old" ] then echo '* ' $Old 'may not be a text file or not readable; skipping...' continue fi echo ' -- sanitizing ' $Old tr -d '\r' < "$Old" > "${Old}.changed" # optionally remove old files, keep only changed ones # #mv -f "${Old}.changed" "$Old" done -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19:12:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bunning.skiltech.com (bunning.skiltech.com [216.235.79.240]) by hub.freebsd.org (Postfix) with ESMTP id 0600E37B41C for ; Tue, 25 Dec 2001 19:12:30 -0800 (PST) Received: (from root@localhost) by bunning.skiltech.com (8.11.6/8.11.6) id fBQ3COu38764; Tue, 25 Dec 2001 22:12:24 -0500 (EST) (envelope-from minter) Received: (from minter@localhost) by bunning.skiltech.com (8.11.6/8.11.6) id fBQ3CM438756; Tue, 25 Dec 2001 22:12:22 -0500 (EST) (envelope-from minter) Date: Tue, 25 Dec 2001 22:12:22 -0500 (EST) From: "H. Wade Minter" X-X-Sender: minter@bunning.skiltech.com To: Doug Reynolds Cc: "jramos2@nc.rr.com" , "questions@freebsd.org" Subject: Re: IDE CD Writer Question In-Reply-To: <20011225181604.B3AD837B419@hub.freebsd.org> Message-ID: <20011225221149.I38031-100000@bunning.skiltech.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 25 Dec 2001, Doug Reynolds wrote: > On Mon, 24 Dec 2001 20:28:03 -0500, J Ramos wrote: > > >Sorry for asking a probably beaten to death question, but the mailing list > >archives keep coming up as unavailable. Is there anything to use to write > >data and music CD's to an IDE burner under FreeBSD? I used xcdroast under > >Linux previously, but I don't use Linux anymore. cdrecord -scanbus returns > >errors, and xcdroast can't scan the bus either, no surprise there... > > burncd > > although someone announced they had a scsi emulation patch in order to > run cdrecord.. if you want that, you might ask on freebsd-hackers I got the patch from http://www.cuivre.fr.eu.org/~thomas/atapicam/ - it seems to work fine for cdrdao with my ATAPI CD writer. --Wade To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19:35:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 918B637B416 for ; Tue, 25 Dec 2001 19:35:27 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Tue, 25 Dec 2001 22:37:36 -0500 From: "Joe & Fhe Barbish" To: "Robin Hall" Cc: "FBSD Questions" Subject: RE: device not configured Date: Tue, 25 Dec 2001 22:35:24 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <20011226023937.94228.qmail@web20501.mail.yahoo.com> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What the boot log shows is the default generic Sio0 and Sio1 the PC's com1 and com2 ports, that's FBSD's cuaa0 and cuaa1. You are using cuaa2 it better not work. Try using Cuaa0. This is a external modem connected to PC com1 port, right? Try tip com1 to connect to PC com1 port. Enter hayes AT commands to talk to modem. Use ~q to exit tip command. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall Sent: Tuesday, December 25, 2001 9:40 PM To: freebsd-questions@FreeBSD.ORG Subject: RE: device not configured Ok i finally was able to get this copied over. This is the dmesg from the section on setting up the modem: m0: irq 12 on atkbdc0 PS/2: No such file or directory. psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 guardian# psm0: model Generic PS/2 mouse, device ID 0 psm0:: Too many arguments. from what I see sio1 it the setup for my modem port. This is the correct irq and address for it. If this is showing in dmesg as being set up how come when I use cuaa2 it is telling me device not configured? This is the generic kernel no configuration. When I use the setup program I don't even get the optioon to setup ppp0 on the right port? anyone have any ideas? TIA ===== Robin E. Hall rob33_me@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19:40: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scottro11.homeunix.net (24-168-25-8.nyc.rr.com [24.168.25.8]) by hub.freebsd.org (Postfix) with ESMTP id 8EC7437B419 for ; Tue, 25 Dec 2001 19:39:59 -0800 (PST) Received: from scott1.nyc.rr.com (unknown [192.168.1.100]) by asa.localdomain (Postfix) with ESMTP id D1D516BA for ; Tue, 25 Dec 2001 13:39:20 -0500 (EST) Message-Id: <5.1.0.14.0.20011225131913.05667cd0@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 25 Dec 2001 13:25:26 -0500 To: freebsd-questions@FreeBSD.ORG From: Scott Subject: Postfix and fetchmail problem (and solution) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This might be more appropriate for newbies, but thought I'd put it here in case someone runs into the same issue. Installed postfix last night. It's always worked out of the box with Linux, save for having to add a user postfix. When I installed from ports, it did that for me. However, though fetchmail was showing messages being received, I couldn't find them. Searched deja, saw various and sundry solutions, none of which worked--finally bothered to check /var/log/maillog, which would have saved me hours of work. (That's the main reason I'm posting this, more as a lesson in troubleshooting for the less-experienced like myself). It showed that postfix was trying to open /etc/aliases.db which didn't exist. There was an aliases.db, however it was in /usr/local/etc/postfix. So, I simply copied it over to /etc--the quick and dirty solution, but it wasn't evident to me at first glance which line in postfix's main.cf had to be changed and it was late. At any rate, the moral of the story is check the included tools, such as log files--they can save you a lot of searching. Thanks Scott Robbins P.S--if this was an inappropriate post for this forum, please let me know. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19:42:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 5379937B416 for ; Tue, 25 Dec 2001 19:42:18 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Tue, 25 Dec 2001 22:44:28 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: RE: Dial-Up Using KPPP Date: Tue, 25 Dec 2001 22:42:16 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <20011225121326.86505.qmail@mail.com> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Include ppp configuration files in Email so people can see how you have it configured, to decide which file needs permission changes. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of King Kassle Sent: Tuesday, December 25, 2001 7:13 AM To: freebsd-questions@FreeBSD.ORG Subject: Dial-Up Using KPPP How to dial up using kppp without become root, what files which i must change the permision ? Umm, that's all thank you [kassle] -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup 1 cent a minute calls anywhere in the U.S.! http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http:// www.getpennytalk.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 19:46:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freeway.dcfinc.com (cx74889-a.phnx3.az.home.com [24.1.193.157]) by hub.freebsd.org (Postfix) with ESMTP id 8329737B405; Tue, 25 Dec 2001 19:46:37 -0800 (PST) Received: (from chad@localhost) by freeway.dcfinc.com (8.8.8/8.8.8) id UAA00455; Tue, 25 Dec 2001 20:46:22 -0700 (MST) (envelope-from chad) Date: Tue, 25 Dec 2001 20:46:22 -0700 From: "Chad R. Larson" To: Wilko Bulte Cc: Chris Wilmes , damien@carroll.com, freebsd-questions@FreeBSD.ORG, freebsd-stable@FreeBSD.ORG Subject: Re: Sharing a SCSI bus with 2 controllers Message-ID: <20011225204622.B29819@freeway.dcfinc.com> References: <55670000.1008866988@50.dhcp.hck.carroll.com> <20011221114829.E23547@freebie.xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011221114829.E23547@freebie.xs4all.nl>; from wkb@freebie.xs4all.nl on Fri, Dec 21, 2001 at 11:48:29AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 21, 2001 at 11:48:29AM +0100, Wilko Bulte wrote: > On Thu, Dec 20, 2001 at 05:24:52PM -0600, Chris Wilmes wrote: >> On Thu, 20 Dec 2001 damien@carroll.com wrote: >> >>> Is it possible to share a SCSI device with two different >>> controllers? I have a tape backup that I want to share with >>> two systems, and I want them to be both connected at the same >>> time. I have connected both controllers to the tape backup, >>> made sure that they were configured as different device >>> numbers, and re-booted both systems. One is a Windows >>> Machine, the other is a BSD box. Both of the controllers are >>> the same (Adaptec 29160N) The BSD box is complaining about >>> seeing SCSI bus resets on the bus: >>> >>> ahc0: Someone reset channel A >>> >>> What is the correct way to do this (if it is at all >>> possible)? Are there special kernel or hardware settings >>> required for this to work properly? On our Pyramids, we had a kernel build option to support "dual hosting". It did two things. The first was to suppress "spurious interrupt" messages when one machine was doing SCSI bus resets during its bootup probes. The other was for the driver(s) to restart any I/O that was stopped by a reset from the other end, without complaint. Sounds like a useful feature for us FreeBSD'rs too. -crl -- Chad R. Larson (CRL15) 602-953-1392 Brother, can you paradigm? chad@dcfinc.com chad@larsons.org larson1@home.com DCF, Inc. - 14623 North 49th Place, Scottsdale, Arizona 85254-2207 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 20:10:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id CC38337B419 for ; Tue, 25 Dec 2001 20:10:09 -0800 (PST) Received: from barbish ([63.70.155.20]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Tue, 25 Dec 2001 23:12:19 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw Date: Tue, 25 Dec 2001 23:10:07 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there a way using firewalls to identify www advertising Banners & the auto spawning of wed pages so they can be blocked? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 20:19:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bean.epix.net (bean.epix.net [199.224.64.57]) by hub.freebsd.org (Postfix) with ESMTP id 10B1C37B417 for ; Tue, 25 Dec 2001 20:19:17 -0800 (PST) Received: from there (clsm-58ppp224.epix.net [209.74.58.224]) by bean.epix.net (8.12.1/2001112001/PL) with SMTP id fBQ4JF5n014197 for ; Tue, 25 Dec 2001 23:19:15 -0500 (EST) Message-Id: <200112260419.fBQ4JF5n014197@bean.epix.net> Content-Type: text/plain; charset="iso-8859-1" From: Dave Kaufman Reply-To: daverk@epix.net To: freebsd-questions@freebsd.org Subject: re: dcopserver Date: Tue, 25 Dec 2001 23:19:15 -0500 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i have the same problem with kde and dcopserver. how do i apply the patch that will fix this. i have the patch (a .diff file) but don't know what to do with it. thanks Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 21:35:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.knology.net (user-24-214-63-13.knology.net [24.214.63.13]) by hub.freebsd.org (Postfix) with SMTP id 0422F37B405 for ; Tue, 25 Dec 2001 21:35:08 -0800 (PST) Received: (qmail 3849 invoked from network); 26 Dec 2001 05:34:50 -0000 Received: from user-24-214-92-93.knology.net (HELO grumpy.dyndns.org) (24.214.92.93) by user-24-214-63-13.knology.net with SMTP; 26 Dec 2001 05:34:50 -0000 Received: from localhost (localhost [127.0.0.1]) by grumpy.dyndns.org (8.11.6/8.11.6) with ESMTP id fBQ5YdU52760; Tue, 25 Dec 2001 23:34:39 -0600 (CST) (envelope-from dkelly@grumpy.dyndns.org) Message-Id: <200112260534.fBQ5YdU52760@grumpy.dyndns.org> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: Michal Pasternak , freebsd-questions@FreeBSD.ORG From: David Kelly Subject: Re: Dos -> Unix end-of-line conversion In-reply-to: Message from Jonathan Chen of "Wed, 26 Dec 2001 11:32:16 +1300." <20011226113216.A24782@grimoire.chen.org.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 25 Dec 2001 23:34:39 -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sorry to break the threading as I was too aggressive with the Delete key. In another fork of this thread it was clarified that one wished to do DOS-style line terminations on the contents of /etc/ to be copied to a floppy. /usr/ports/emulators/mtools/ is what you want. Allows use of the floppy in DOS format without the effort of mounting. The "mcopy" command will translate text files coming or going using the -t option. OTOH if you use this option it will assume everything is text. -- David Kelly N4HHE, dkelly@hiwaay.net ===================================================================== The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 21:35:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web11202.mail.yahoo.com (web11202.mail.yahoo.com [216.136.131.184]) by hub.freebsd.org (Postfix) with SMTP id 2BF6C37B41A for ; Tue, 25 Dec 2001 21:35:12 -0800 (PST) Message-ID: <20011226053512.72048.qmail@web11202.mail.yahoo.com> Received: from [12.248.105.68] by web11202.mail.yahoo.com via HTTP; Tue, 25 Dec 2001 21:35:12 PST Date: Tue, 25 Dec 2001 21:35:12 -0800 (PST) From: C L Dokic Subject: toshiba/laptop To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG PLEASE, can I load and successfully configure Free BSD on Toshiba laptop Satellite 1555CDS? I am in particularly interested to use BSD platform to develop securities applications [Firewall,ISD].Toshiba wouldn't talk to me, since they support Microsoft.If answer is YES, which version? I would appreciate your respond. Thank you, Cedomilj __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 22: 0:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from domain.com (44.mujb.dlls.dllstxbk.dsl.att.net [12.98.249.44]) by hub.freebsd.org (Postfix) with SMTP id 49F8F37B417 for ; Tue, 25 Dec 2001 22:00:42 -0800 (PST) Received: (qmail 74727 invoked by alias); 26 Dec 2001 05:58:59 -0000 Received: from unknown (HELO there) (127.0.0.1) by loopback with SMTP; 26 Dec 2001 05:58:59 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Jason Halbert Reply-To: jason@jason-n3xt.org To: questions@freebsd.org Subject: SiS Ethernet Controller Date: Wed, 26 Dec 2001 05:58:58 +0000 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011226060042.49F8F37B417@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Everyone: I'm running into a problem with a SiS NIC. I'm using an ECS K7S5A mainboard with an Athlon 4 XP1500+ and 512MB of RAM. The onboard NIC is an SiS 900 10/100BaseTX. I also have in the box a 3Com 3CSOHO100-TX that works just fine. I cannot get the SiS to work at all. I am currently running 4.4-STABLE but I have tried 5.0-CURRENT with no success. Here is the dmesg output relating to the two NICs. sis0: port 0xd400-0xdff mem 0xcfffd000-0xcfffdfff irq 5 at device 3.0 on pci0 sis0: Ethernet address: 00:00:00:00:00:00 sis0: MII without any PHY! device_probe_and_attach: sis0 attach returned 6 xl0: <3Com 3cSOHO100-TX OfficeConnect> port 0xd000-0xd07f mem 0xcfffcf80-0xcfffcfff irq 11 at device 13.0 on pci0 xl0: Ethernet address: 00:50:da:b4:85:b6 miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto I'm not sure where to go from here. Any help would be greatly appreciated. Thanks IA Jason jason@jason-n3xt.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 22: 2:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 562E937B41A for ; Tue, 25 Dec 2001 22:02:19 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBQ62Hf15124 for ; Wed, 26 Dec 2001 07:02:18 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122607005016:2655 ; Wed, 26 Dec 2001 07:00:50 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBQ6Ap540482 for freebsd-questions@FreeBSD.ORG; Wed, 26 Dec 2001 07:10:51 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Wed, 26 Dec 2001 07:10:51 +0100 From: Roman Neuhauser To: freebsd-questions@FreeBSD.ORG Subject: Re: toshiba/laptop Message-ID: <20011226071051.A40260@roman.mobil.cz> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011226053512.72048.qmail@web11202.mail.yahoo.com> Mime-Version: 1.0 In-Reply-To: <20011226053512.72048.qmail@web11202.mail.yahoo.com> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 07:00:50 AM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/26/2001 07:00:56 AM, Serialize complete at 12/26/2001 07:00:56 AM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Tue, 25 Dec 2001 21:35:12 -0800 (PST) > From: C L Dokic > Subject: toshiba/laptop > To: freebsd-questions@FreeBSD.ORG > > PLEASE, > > can I load and successfully configure Free BSD on > Toshiba laptop Satellite 1555CDS? I am in particularly > interested to use BSD platform to develop securities > applications [Firewall,ISD].Toshiba wouldn't talk to > me, since they support Microsoft.If answer is YES, > which version? > I would appreciate your respond. > > Thank you, > > Cedomilj www.freebsd.org has a link to a hardware compatibility list. other than that, you could also try freebsd-hardware@. -- FreeBSD 4.4-STABLE 7:09AM up 4 days, 3:39, 6 users, load averages: 0.00, 0.00, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 22:24:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id D2F1337B41F for ; Tue, 25 Dec 2001 22:24:21 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id WAA01169; Tue, 25 Dec 2001 22:24:18 -0800 Message-ID: <3C296D11.8080608@owt.com> Date: Tue, 25 Dec 2001 22:24:17 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: jason@jason-n3xt.org Cc: questions@FreeBSD.ORG Subject: Re: SiS Ethernet Controller References: <20011226060042.49F8F37B417@hub.freebsd.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jason Halbert wrote: > Hello Everyone: > > I'm running into a problem with a SiS NIC. I'm using an ECS K7S5A > mainboard with an Athlon 4 XP1500+ and 512MB of RAM. The onboard NIC > is an SiS 900 10/100BaseTX. I also have in the box a 3Com > 3CSOHO100-TX that works just fine. I cannot get the SiS to work at > all. I am currently running 4.4-STABLE but I have tried 5.0-CURRENT > with no success. Here is the dmesg output relating to the two NICs. > > sis0: port 0xd400-0xdff mem > 0xcfffd000-0xcfffdfff irq 5 at device 3.0 on pci0 > sis0: Ethernet address: 00:00:00:00:00:00 > sis0: MII without any PHY! > device_probe_and_attach: sis0 attach returned 6 > xl0: <3Com 3cSOHO100-TX OfficeConnect> port 0xd000-0xd07f mem > 0xcfffcf80-0xcfffcfff irq 11 at device 13.0 on pci0 > xl0: Ethernet address: 00:50:da:b4:85:b6 > miibus0: on xl0 > xlphy0: <3Com internal media interface> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > I'm not sure where to go from here. Any help would be greatly > appreciated. JLemon gave me a patch but it did not work. He needs a motherboard to make it work. No one has sent him one since the sis controller hasn't made it into current. There is a set of patchs coming down the line to make the ATA-100 controller run at UDMA-5 mode. I converted them to stable and found that it was more profitable to purchase a Promise Ultra 100 TX2. SIS @ 33 & 100 was only a couple hundred bytes/sec. The TX2 was 10% faster across the board. I may have made a mistake so I don't pass them around. Kent > > Thanks IA > > Jason > jason@jason-n3xt.org > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > > -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Dec 25 23:30:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 6D99637B41E for ; Tue, 25 Dec 2001 23:30:36 -0800 (PST) Received: from dialup-209.244.107.126.dial1.sanjose1.level3.net ([209.244.107.126] helo=gohan.cjclark.org) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 16J8Vv-0004iT-00; Tue, 25 Dec 2001 23:30:25 -0800 Received: (from cjc@localhost) by gohan.cjclark.org (8.11.6/8.11.1) id fBPKM8X00305; Tue, 25 Dec 2001 15:22:08 -0500 (EST) (envelope-from cjc) Date: Tue, 25 Dec 2001 15:22:08 -0500 From: "Crist J. Clark" To: "Oles' Hnatkevych" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: arp, firewall, etc Message-ID: <20011225152208.B136@gohan.cjclark.org> Reply-To: cjclark@alum.mit.edu References: <02901731.20011224094945@fc.kiev.ua> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <02901731.20011224094945@fc.kiev.ua>; from gnut@fc.kiev.ua on Mon, Dec 24, 2001 at 09:49:45AM +0300 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 09:49:45AM +0300, Oles' Hnatkevych wrote: > Hello freebsd-questions, > > how do I prevent users from setting IP address > manually so they can not use another one's IP > address. > > my first thought was to set permanent entries > in ARP table Then just use the other MAC address too. > is there any other way to cope with that? Only accept packets from IP address a.b.c.d on the wire that is connected to the machine a.b.c.d. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 1:38:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.worldgatein.com (ns2.worldgatein.com [203.109.64.24]) by hub.freebsd.org (Postfix) with ESMTP id 5D1D537B417 for ; Wed, 26 Dec 2001 01:38:12 -0800 (PST) Received: from rivendell.worldgatein.net (interoffice.worldgatein.net [203.109.64.31]) by ns2.worldgatein.com (Postfix) with ESMTP id 2E709BDEC; Wed, 26 Dec 2001 14:55:57 +0530 (IST) Received: by rivendell.worldgatein.net (Postfix, from userid 1001) id 2F9153260A; Wed, 26 Dec 2001 16:06:25 +0530 (IST) Date: Wed, 26 Dec 2001 16:06:25 +0530 From: Devdas Bhagat To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw Message-ID: <20011226160625.F15062@rivendell.worldgatein.net> Reply-To: Devdas Bhagat References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Tue, Dec 25, 2001 at 11:10:07PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 25/12/01 23:10 -0500, Joe & Fhe Barbish wrote: > Is there a way using firewalls to identify www advertising Banners & the > auto spawning of wed pages so they can be blocked? I would recommend junkbuster, or a http proxy like squid for that purpose. Devdas Bhagat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 1:56:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gilberto.physik.rwth-aachen.de (gilberto.physik.RWTH-Aachen.DE [137.226.46.168]) by hub.freebsd.org (Postfix) with ESMTP id 7039537B405 for ; Wed, 26 Dec 2001 01:56:41 -0800 (PST) Received: (from kuku@localhost) by gilberto.physik.rwth-aachen.de (8.11.1/8.9.3) id fBQ9ue867616; Wed, 26 Dec 2001 10:56:40 +0100 (CET) (envelope-from kuku) Date: Wed, 26 Dec 2001 10:56:40 +0100 (CET) From: Christoph Kukulies Message-Id: <200112260956.fBQ9ue867616@gilberto.physik.rwth-aachen.de> To: questions@freebsd.org Subject: wi0 not detected Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm trying to get an ELSA Airlancer M11 working but the device doesn't seem to get configured: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #10: Wed Dec 26 10:38:18 CET 2001 kuku@kukulies.dynip.de:/usr/src/sys/compile/BGATEI4B Timecounter "i8254" frequency 1193182 Hz CPU: AMD Am5x86 Write-Through (486-class CPU) Origin = "AuthenticAMD" Id = 0x4e4 Stepping = 4 Features=0x1 real memory = 67108864 (65536K bytes) avail memory = 62201856 (60744K bytes) Preloaded elf kernel "kernel" at 0xc0314000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031409c. npx0: on motherboard npx0: INT 16 interface pcib0 on motherboard pci0: on pcib0 chip0: at device 0.0 on pci0 ncr0: port 0xe800-0xe8ff mem 0xfafef000-0xfafef0ff irq 9 at device 1.0 on pci0 isab0: at device 2.0 on pci0 isa0: on isab0 de0: port 0xe400-0xe47f mem 0xfafee000-0xfafee07f irq 10 at device 4.0 on pci0 de0: SMC 21041 [10Mb/s] pass 2.1 de0: address 00:e0:29:0b:7a:4e pci0: at 5.0 irq 11 chip1: irq 12 at device 6.0 on pci0 orm0: --====_ABC0987654321DEF_====-- --====_ABC1234567890DEF_==== Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit ------------------ Virus Warning Message (on smtp.planet.tn) HAMSTER.DOC.pif is removed from here because it contains a virus. --------------------------------------------------------- --====_ABC1234567890DEF_==== --====_ABC1234567890DEF_====-- --====_ABC1234567890DEF_====-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 7:14:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mxzilla4.xs4all.nl (mxzilla4.xs4all.nl [194.109.6.48]) by hub.freebsd.org (Postfix) with ESMTP id 4826C37B429 for ; Wed, 26 Dec 2001 07:14:42 -0800 (PST) Received: from xs4.xs4all.nl (rene@xs4.xs4all.nl [194.109.6.45]) by mxzilla4.xs4all.nl (8.12.0/8.12.0) with ESMTP id fBQFEevL012435 for ; Wed, 26 Dec 2001 16:14:41 +0100 (CET) Received: (from rene@localhost) by xs4.xs4all.nl (8.9.0/8.9.0) id QAA06613 for questions@freebsd.org; Wed, 26 Dec 2001 16:14:40 +0100 (CET) Date: Wed, 26 Dec 2001 16:14:40 +0100 From: rene@xs4all.nl To: questions@freebsd.org Subject: robust copy program required Message-ID: <20011226161440.H21241@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I have several CDROMs with some scratches etc. I'd like to get my hands on a copy tool that can log anything that is un-copyable, but DOES copy the rest on the CDROM. is there such a thing for unix? i guess it may come as a script of some sort? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 7:19:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id EF62F37B416; Wed, 26 Dec 2001 07:19:07 -0800 (PST) Received: (from dan@localhost) by dan.emsphone.com (8.11.6/8.11.6) id fBQFJ5P97786; Wed, 26 Dec 2001 09:19:05 -0600 (CST) (envelope-from dan) Date: Wed, 26 Dec 2001 09:19:05 -0600 From: Dan Nelson To: Andrei Popov Cc: freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: Swap not used *at**all* Message-ID: <20011226151905.GA84869@dan.emsphone.com> References: <20011226091540.A70996@m-net.arbornet.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011226091540.A70996@m-net.arbornet.org> User-Agent: Mutt/1.3.24i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Dec 26), Andrei Popov said: > > Is this normal: > > andrei@vogon:~ > 2:05:49pm% swapinfo > Device 1K-blocks Used Avail Capacity Type > /dev/ad4s1b 525344 0 525344 0% Interleaved > > This machine is running with 256MB RAM and a 512MB swap device. Swap usage > is zero even when running X and postgress and aolserver with a running > instance of OpenACS-4. Try this: dd if=/dev/zero of=/dev/null bs=192m count=1 That should force some swapping :) -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 7:29: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chmls18.ne.ipsvc.net (chmls18.ne.ipsvc.net [24.147.1.153]) by hub.freebsd.org (Postfix) with ESMTP id 9019F37B41B for ; Wed, 26 Dec 2001 07:29:01 -0800 (PST) Received: from be-well.ilk.org (lowellg.ne.mediaone.net [24.147.188.158]) by chmls18.ne.ipsvc.net (8.11.6/8.11.6) with ESMTP id fBQFT0G21047; Wed, 26 Dec 2001 10:29:00 -0500 (EST) Received: (from lowell@localhost) by be-well.ilk.org (8.11.6/8.11.4) id fBQFSxN58781; Wed, 26 Dec 2001 10:28:59 -0500 (EST) (envelope-from lowell) To: freebsd-questions@freebsd.org, juli@merino.net Subject: Re: Where is pdfjadetex? References: From: Lowell Gilbert Date: 26 Dec 2001 10:28:58 -0500 In-Reply-To: juli@merino.net's message of "26 Dec 2001 02:21:24 +0800" Message-ID: <44n10680g5.fsf@lowellg.ne.mediaone.net> Lines: 6 X-Mailer: Gnus v5.7/Emacs 20.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG juli@merino.net (Julio Merino) writes: > I can't find any port containing pdfjadetex... Where is it (port) ? On some other OS, I have pdfjadetex, but it's always just a link to pdftex or (more commonly) pdfetex. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 8: 0:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id 9D74037B405 for ; Wed, 26 Dec 2001 08:00:32 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP id RAA03604 (8.8.8/1.13); Wed, 26 Dec 2001 17:00:29 +0100 (MET) Message-Id: <200112261600.RAA03604@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: Kenneth Wayne Culver Subject: Re: KDE2.2.2 starts-up terrible slow Date: Wed, 26 Dec 2001 17:05:24 +0000 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks a lot, it was the portwrapper. I switched it on now and it works perfect. In the mean time I found out that I also could improve the speed by not making the ports stealth. Your solution is much better. Simon Siemonsma On Wednesday 26 December 2001 15:43, you wrote: > You should be starting the rpcbind, or portmapper service on your computer > before starting kde, and you should also take a look at > /usr/local/etc/rc.d/fam.sh, and make that executable... that will start > all the necessary daemons for kde2. For me kde2 starts within about 10 > seconds, so I'm not seeing your speed problems, and this is on a 400MHz > computer. > > Ken > > On Wed, 26 Dec 2001, Simon Siemonsma wrote: > > When I say slow, I realy mean slow. Actually yesterday I did some ironing > > during start-up;(. > > > > Regarding the sound card after new install I didn't install yet, but I > > already had the problem before. Neverteless I will install it again, so I > > can be sure no two problems are interacting. > > I have exactly the same problems as root. > > I also have the entries in /etc/services. > > > > Neverteless you gave me some idea. given that port 111 is an rpc service > > (whatever that is), would my problems have to do with fam? Afterall the > > package stated that you have to add an entry to /etc/rpc for fam (which > > I did). > > > > Thanks so far, > > > > Simon Siemonsma > > > > On Wednesday 26 December 2001 14:08, you wrote: > > > Mmm strange. Well, first off. KDE will be slow there... I have a P2-266 > > > and kde is slow, so your 350 won't be much faster... > > > > > > Well, about mcop, that seems weird permissions. Have you checked you > > > have access to the audio devices in /dev? If not, solve it. > > > > > > Have you tried it as root? > > > > > > From /etc/services: > > > sunrpc 111/tcp rpcbind #SUN Remote Procedure Call > > > sunrpc 111/udp rpcbind #SUN Remote Procedure Call > > > > > > Dunno what is trying to connect there, but check it... > > > > > > HTH > > > > > > On Wed, Dec 26, 2001 at 02:24:24PM +0000, Simon Siemonsma wrote: > > > > Recently I upgraded my system to KDE2.2.2. Since then KDE starts-up > > > > terrible slow. Furthermore sometimes it freezes for some time, to > > > > continue later on. > > > > > > > > I performed the following actions: > > > > -did a complete reinstall (version 4.3) > > > > -installed XFree86-4 as a package > > > > -installed KDE2.2.2 as a package > > > > -synchronised my source to FreeBSD 4.4 > > > > -make world > > > > -make buildkernel and make installkernel > > > > It still has the same problem. > > > > > > > > Configuration > > > > -As my machine is only used at home I have as services turned of as > > > > possible -I use IPFW > > > > -I use netgraph to access the internet (ADSL) > > > > > > > > To me it looks like as if it is looking for something at > > > > 127.0.0.1:111. > > > > > > > > Can someone please help me out, I don't understand it anymore. > > > > > > > > If I start KDE with startx >stout 2>errout I get the following > > > > messages on my console: > > > > Dec 26 13:34:51 PII-350 /kernel: Connection attempt to TCP > > > > 127.0.0.1:111 from 127.0.0.1:1860 > > > > Dec 26 13:35:24 PII-350 last mesage repeated 7 times. > > > > Dec 26 13:35:48 same as first line > > > > This is repeated with 1860 replaced with 1861 till 1864 > > > > > > > > errout contains the following at the end: > > > > Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, > > > > removing from list! > > > > Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, > > > > removing from list! > > > > DCOPServer up and running. > > > > kdeinit: setgroups: Operation not permitted > > > > kdeinit: setgroups: Operation not permitted > > > > kdeinit: setgroups: Operation not permitted > > > > kicker: WARNING: KDE detected X Error: BadDrawable (invalid Pixmap or > > > > Window parameter) 9 > > > > Major opcode: 14 > > > > kicker: WARNING: KDE detected X Error: BadDrawable (invalid Pixmap or > > > > Window parameter) 9 > > > > Major opcode: 14 > > > > X Error of failed request: BadWindow (invalid Window parameter) > > > > Major opcode of failed request: 7 (X_ReparentWindow) > > > > Resource id in failed request: 0x160000f > > > > Serial number of failed request: 24683 > > > > Current serial number in output stream: 24809 > > > > kdeinit: Fatal IO error: client killed > > > > kdeinit: sending SIGHUP to children. > > > > KLauncher: Exiting on signal 1 > > > > > > > > waiting for X server to shut down warning: leaving MCOP Dispatcher > > > > and still 9 object references alive. > > > > - Arts::SampleStorage > > > > - Arts::Synth_MULTI_ADD > > > > - Arts::Synth_MULTI_ADD > > > > - Arts::Synth_PLAY > > > > - Arts::StereoVolumeControl > > > > - Arts::StereoEffectStack > > > > - Arts::Synth_BUS_DOWNLINK > > > > - Arts::SoundServerV2 > > > > - Arts::MidiManager > > > > warning: leaving MCOP Dispatcher and still 69 types alive. > > > > > > > > > > > > kdeinit: sending SIGTERM to children. > > > > kdeinit: Exit. > > > > > > > > Simon Siemonsma > > > > > > > > ------------------------------------------------------- > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 8: 3:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166]) by hub.freebsd.org (Postfix) with ESMTP id 00F8B37B416 for ; Wed, 26 Dec 2001 08:03:26 -0800 (PST) Received: from rac1.wam.umd.edu (IDENT:root@rac1.wam.umd.edu [128.8.10.141]) by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA23981; Wed, 26 Dec 2001 10:43:22 -0500 (EST) Received: from rac1.wam.umd.edu (IDENT:sendmail@localhost [127.0.0.1]) by rac1.wam.umd.edu (8.9.3/8.9.3) with SMTP id KAA14038; Wed, 26 Dec 2001 10:43:22 -0500 (EST) Received: from localhost (culverk@localhost) by rac1.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA14034; Wed, 26 Dec 2001 10:43:22 -0500 (EST) X-Authentication-Warning: rac1.wam.umd.edu: culverk owned process doing -bs Date: Wed, 26 Dec 2001 10:43:22 -0500 (EST) From: Kenneth Wayne Culver To: Simon Siemonsma Cc: Julio Merino , freebsd-questions@FreeBSD.ORG Subject: Re: KDE2.2.2 starts-up terrible slow In-Reply-To: <200112261422.PAA16845@smtp.hccnet.nl> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You should be starting the rpcbind, or portmapper service on your computer before starting kde, and you should also take a look at /usr/local/etc/rc.d/fam.sh, and make that executable... that will start all the necessary daemons for kde2. For me kde2 starts within about 10 seconds, so I'm not seeing your speed problems, and this is on a 400MHz computer. Ken On Wed, 26 Dec 2001, Simon Siemonsma wrote: > When I say slow, I realy mean slow. Actually yesterday I did some ironing > during start-up;(. > > Regarding the sound card after new install I didn't install yet, but I > already had the problem before. Neverteless I will install it again, so I can > be sure no two problems are interacting. > I have exactly the same problems as root. > I also have the entries in /etc/services. > > Neverteless you gave me some idea. given that port 111 is an rpc service > (whatever that is), would my problems have to do with fam? Afterall the > package stated that you have to add an entry to /etc/rpc for fam (which I > did). > > Thanks so far, > > Simon Siemonsma > > On Wednesday 26 December 2001 14:08, you wrote: > > Mmm strange. Well, first off. KDE will be slow there... I have a P2-266 > > and kde is slow, so your 350 won't be much faster... > > > > Well, about mcop, that seems weird permissions. Have you checked you have > > access to the audio devices in /dev? If not, solve it. > > > > Have you tried it as root? > > > > From /etc/services: > > sunrpc 111/tcp rpcbind #SUN Remote Procedure Call > > sunrpc 111/udp rpcbind #SUN Remote Procedure Call > > > > Dunno what is trying to connect there, but check it... > > > > HTH > > > > On Wed, Dec 26, 2001 at 02:24:24PM +0000, Simon Siemonsma wrote: > > > Recently I upgraded my system to KDE2.2.2. Since then KDE starts-up > > > terrible slow. Furthermore sometimes it freezes for some time, to > > > continue later on. > > > > > > I performed the following actions: > > > -did a complete reinstall (version 4.3) > > > -installed XFree86-4 as a package > > > -installed KDE2.2.2 as a package > > > -synchronised my source to FreeBSD 4.4 > > > -make world > > > -make buildkernel and make installkernel > > > It still has the same problem. > > > > > > Configuration > > > -As my machine is only used at home I have as services turned of as > > > possible -I use IPFW > > > -I use netgraph to access the internet (ADSL) > > > > > > To me it looks like as if it is looking for something at 127.0.0.1:111. > > > > > > Can someone please help me out, I don't understand it anymore. > > > > > > If I start KDE with startx >stout 2>errout I get the following messages > > > on my console: > > > Dec 26 13:34:51 PII-350 /kernel: Connection attempt to TCP 127.0.0.1:111 > > > from 127.0.0.1:1860 > > > Dec 26 13:35:24 PII-350 last mesage repeated 7 times. > > > Dec 26 13:35:48 same as first line > > > This is repeated with 1860 replaced with 1861 till 1864 > > > > > > errout contains the following at the end: > > > Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, > > > removing from list! > > > Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, > > > removing from list! > > > DCOPServer up and running. > > > kdeinit: setgroups: Operation not permitted > > > kdeinit: setgroups: Operation not permitted > > > kdeinit: setgroups: Operation not permitted > > > kicker: WARNING: KDE detected X Error: BadDrawable (invalid Pixmap or > > > Window parameter) 9 > > > Major opcode: 14 > > > kicker: WARNING: KDE detected X Error: BadDrawable (invalid Pixmap or > > > Window parameter) 9 > > > Major opcode: 14 > > > X Error of failed request: BadWindow (invalid Window parameter) > > > Major opcode of failed request: 7 (X_ReparentWindow) > > > Resource id in failed request: 0x160000f > > > Serial number of failed request: 24683 > > > Current serial number in output stream: 24809 > > > kdeinit: Fatal IO error: client killed > > > kdeinit: sending SIGHUP to children. > > > KLauncher: Exiting on signal 1 > > > > > > waiting for X server to shut down warning: leaving MCOP Dispatcher and > > > still 9 object references alive. > > > - Arts::SampleStorage > > > - Arts::Synth_MULTI_ADD > > > - Arts::Synth_MULTI_ADD > > > - Arts::Synth_PLAY > > > - Arts::StereoVolumeControl > > > - Arts::StereoEffectStack > > > - Arts::Synth_BUS_DOWNLINK > > > - Arts::SoundServerV2 > > > - Arts::MidiManager > > > warning: leaving MCOP Dispatcher and still 69 types alive. > > > > > > > > > kdeinit: sending SIGTERM to children. > > > kdeinit: Exit. > > > > > > Simon Siemonsma > > > > > > ------------------------------------------------------- > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 8:13: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from card.co.ru (mail2.co.ru [194.85.128.20]) by hub.freebsd.org (Postfix) with ESMTP id 666ED37B419 for ; Wed, 26 Dec 2001 08:12:21 -0800 (PST) Received: from tst (n7-34.card.co.ru [62.105.157.34]) by card.co.ru (8.11.4/8.11.0) with SMTP id fBQHILe21686 for ; Wed, 26 Dec 2001 19:18:22 +0200 (EET) Message-Id: <200112261718.fBQHILe21686@card.co.ru> From: VISA SUPPORT To: freebsd-questions@freebsd.org Subject: ÏÀÑÏÎÐÒÍÎ-ÂÈÇÎÂÛÅ ÓÑËÓÃÈ / VISA SUPPORT X-Mailer: The Bat 1.53d Reply-To: evsnew@email.ru Date: Wed, 26 Dec 2001 19:10:08 +0300 Mime-Version: 1.0 Content-Type: text/plain; charset=Windows-1251 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Î Ô Î Ð Ì Ë Å Í È Å Ç À à РÀ Í Ï À Ñ Ï Î Ð Ò Î Â (Öåíû óêàçàíû äëÿ æèòåëåé Ìîñêâû è Ìîñê. îáëàñòè) 35 ðàá.äíåé - $70 21-23 ðàá.äíåé - $140 15-17 ðàá.äíåé - $180 10-12 ðàá.äíåé - $260 8-9 ðàá. äíåé - $330 6-7 ðàá. äíåé - $390 Ïî Âàøåìó çàïðîñó âûøëåì êîìïëåêò íåîáõîäèìûõ äîêóìåíòîâ äëÿ îôîðìëåíèÿ çàãðàíïàñïîðòà. Â È Ç Î Â Û Å Ó Ñ Ë Ó Ã È Îôîðìëåíèå ïðèãëàøåíèé äëÿ ÈÍÎÑÒÐÀÍÖÅ â Ðîññèþ. Îäíîêðàòíîå íà 1 ìåñÿö - $ 25 Ìíîãîêðàòíîå íà 1 ãîä- $ 150 *Ïðàâîâûå âîïðîñû îòíîñèòåëüíî ïðåáûâàíèÿ èíîñòðàííûõ ãðàæäàí íà òåððèòîðèè ÐÔ, ïðîáëåìíûå ñëó÷àè. *Âîïðîñû âûåçäà ÐÎÑÑÈßÍ çà ðóáåæ, îôîðìëåíèå íàäëåæàùèõ äîêóìåíòîâ (ÂÈÇÛ). ÁÅÑÏËÀÒÍÛÉ ÂÛÅÇÄ ÊÓÐÜÅÐÀ Ê ÂÀÌ Â ÎÔÈÑ Â ÏÐÅÄÅËÀÕ ã. ÌÎÑÊÂÛ ÒÅË./ÔÀÊÑ: (095) 797-04-82, 797-04-08, 107-78-58 V I S A S E R V I C E S L e g a l i z a t i o n o f t h e R u s s i a n v i s a - i n v i t a t i o n s f o r f o r e i g n c i t i z e n s. Single for 1 month-only $25 Multiple for 1 year-only $150 *S o l u t i o n o f l e g a l m a t t e r s c o n c e r n i n g f o r e i g n c i t i z e n s s t a y o n t h e t e r r i t o r y o f R u s s i a n F e d e r a t i o n, q u e s t i o n a b l e i s s u e s. *A s s i s t a n c e i n v i s a s r e g i s t r a t i o n f o r t h e f o r e i g n c i t i z e n s i n R u s s i a. *S o l u t i o n o f t h e p r o b l e m s c o n c e r n i n g R U S S I A N c i t i z e n s d e p a r t u r e a b r o a d, r e g i s t r a t i o n o f t h e p r o p e r d o c u m e n t s: f o r e i g n p a s s p o r t s a n d v i s a s. TEL./FAX: +7(095) 797-04-82, 797-04-08, 107-78-58 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 8:25:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 1690F37B405 for ; Wed, 26 Dec 2001 08:25:42 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Wed, 26 Dec 2001 11:27:52 -0500 From: "Joe & Fhe Barbish" To: Cc: "FBSD Questions" Subject: RE: download mirror of mailinglists? Date: Wed, 26 Dec 2001 11:25:38 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-reply-to: <20011226154734.G21241@xs4all.nl> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sure the long way around just to search the questions archives. Try http://groups.google.com/groups?hl=en&group=mailing.freebsd.questions -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of rene@xs4all.nl Sent: Wednesday, December 26, 2001 9:48 AM To: questions@freebsd.org Subject: download mirror of mailinglists? Hi. Due to the fact that the mailinglist searchengine has been without data to search in for several weeks now, I would like to get a local copy of the mailinglists. I have read to ftp://ftp.freebsd.org/pub/FreeBSD/doc/mailing-lists/README; Since FTP will stupidly copy the whole file each time, not just the bits appended to it since the last mirroring pass, it is recommended that you use the cvsup utility to mirror the mail archives (see supfile.cvsup for example configuration) if you really want these archives locally. So, being a good boy I went through all those steps, including creating a ~/.cvsup/auth file with a valid password. However, when I run CVSUP I get: { (root@messenger) (03:05P) (#73:578) }- { (/home/rene ) (/root) }- $ cvsup -g -L 2 mailinglists.supfile Parsing supfile "mailinglists.supfile" Connecting to freefall.freebsd.org Connected to freefall.freebsd.org Server software version: SNAP_16_1e Server error: Authentication failed I think this means that the server won't serve me until I get some admin to type in my name and password on their end, but *I am not sure*... Some advice on how to get a good local archive of the mailinglists (apart from subscribing, doh!) would be appreciated! Merry Xmas, Rene. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9: 7:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sdsl-216-36-101-146.dsl.chi.megapath.net (sdsl-216-36-101-146.dsl.chi.megapath.net [216.36.101.146]) by hub.freebsd.org (Postfix) with SMTP id E098637B416 for ; Wed, 26 Dec 2001 09:07:07 -0800 (PST) Received: (qmail 15080 invoked from network); 26 Dec 2001 17:07:28 -0000 Received: from apu.five.sight (HELO apu.five.sight.fivesight.com) (lucas@192.168.0.102) by wiggum.five.sight with SMTP; 26 Dec 2001 17:07:28 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15402.975.919438.656366@apu.five.sight> Date: Wed, 26 Dec 2001 11:07:27 -0600 To: Frank Milner From: Lucas Bergman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: software In-Reply-To: <3C29D88C.54F4042F@pathcom.com> References: <3C29D88C.54F4042F@pathcom.com> X-Mailer: VM 6.96 under 21.4 (patch 5) "Civil Service" XEmacs Lucid Reply-To: lucas@slb.to Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > This no doubt sounds like a naive question, but will Windows > applications run under FreeBSD? The short answer is: no. There is a program for this purpose called WINE, which is capable of running many Windows applications on Unix. Re-implementing Windows is hard work, however, and WINE is not very reliable with complicated software. See http://www.winehq.com/ > If not, what everyday word processors, spreadsheets, utlilities, > etc., can be used with this operating system? ApplixWare is available natively for FreeBSD, but it costs money. The Linux versions of Star Office and WordPerfect (if it's still alive?) work under emulation. There are ``open source'' office suite projects underway for both the KDE and GNOME desktops as well. As for applications that are less boring than word processors and spreadsheets, there are tons. Most of them are free with source code, and the ones that are out of ``beta'' are generally very reliable. See http://www.freebsd.org/ports/ > Perhaps Star Office applications? Yes. FreeBSD can run almost all Linux binaries flawlessly under emulation, and the Linux version of Star Office is no exception. > In other words, is FreeBSD suitable in anyway for the standalone > desktop? I, and I imagine most people who read this list, use FreeBSD as an every day system. That said, FreeBSD is not simply a free version of Windows, so one must expect to expend some effort in the direction of learning a new system. You usually don't have to give up your Windows installation in order to try out FreeBSD, so if you have some time to invest and some curiosity, then, by all means give it a try. After all, learning to drive a car takes considerably longer than learning to ride a tricycle, but most people I know would consider the former worth the extra energy. Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:12:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc26.worldnet.att.net (mtiwmhc26.worldnet.att.net [204.127.131.51]) by hub.freebsd.org (Postfix) with ESMTP id 8BB5B37B417 for ; Wed, 26 Dec 2001 09:12:32 -0800 (PST) Received: from columbia ([12.93.215.57]) by mtiwmhc26.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011226171231.IIUE13869.mtiwmhc26.worldnet.att.net@columbia>; Wed, 26 Dec 2001 17:12:31 +0000 From: "Andrew C. Hornback" To: "Robin Hall" , Subject: RE: device not configured Date: Wed, 26 Dec 2001 12:10:16 -0500 Message-ID: <005a01c18e30$30a245c0$6600000a@ach.domain> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal In-Reply-To: <20011226113621.44230.qmail@web20502.mail.yahoo.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall > Sent: Wednesday, December 26, 2001 6:36 AM > To: freebsd-questions@FreeBSD.org > Subject: RE: device not configured > > > I have an internal AOpen modem. This is a hardware > modem. I have the jumpers set to com 3 in windows > which is ttyS0 in linux and should be cuaa2 in > freeBSD. Why isn't this showing up on the correct > port? > > Robin E. Hall If you're using the GENERIC kernel, it only supports devices on classical COM 1 and COM 2. To support any other COM ports, you need to compile a new kernel with support for those ports. A look at the GENERIC config file should of assistance. --- Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:13:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from klima.physik.uni-mainz.de (klima.Physik.Uni-Mainz.DE [134.93.180.162]) by hub.freebsd.org (Postfix) with ESMTP id 9AE3437B405 for ; Wed, 26 Dec 2001 09:13:31 -0800 (PST) Received: from mail.Physik.Uni-Mainz.DE (mail.Physik.Uni-Mainz.DE [134.93.180.161]) by klima.physik.uni-mainz.de (8.11.6/8.11.4) with ESMTP id fBQHDUa18064 for ; Wed, 26 Dec 2001 18:13:30 +0100 (CET) (envelope-from ohartman@klima.physik.uni-mainz.de) Date: Wed, 26 Dec 2001 18:13:30 +0100 (CET) From: "Hartmann, O." X-X-Sender: ohartman@mail.physik.uni-mainz.de To: freebsd-questions@freebsd.org Subject: Some questions about undocumented KERNEL options Message-ID: <20011226181039.L476-100000@mail.physik.uni-mainz.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear Sirs. Can anyone tell me something about these kernel options: options ENABLE_VFS_IOOPT options KEY options LOUTB options FE_8BIT_SUPPORT options ENABLE_ALART I found no further documentation on this and so I would like to ask the community. What happens to a server if theses options are enabled? Do they offer performance hints assumed the kernel stays stable if enabled? What is the benefit or purpose of each of this options and in which cases they should get relevance to be switched on or off? Thank you very much .. Oliver -- MfG O. Hartmann ohartman@klima.physik.uni-mainz.de ------------------------------------------------------------------ IT-Administration des Institutes fuer Physik der Atmosphaere (IPA) ------------------------------------------------------------------ Johannes Gutenberg Universitaet Mainz Becherweg 21 55099 Mainz Tel: +496131/3924662 (Maschinenraum) Tel: +496131/3924144 (Buero) FAX: +496131/3923532 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:17:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc26.worldnet.att.net (mtiwmhc26.worldnet.att.net [204.127.131.51]) by hub.freebsd.org (Postfix) with ESMTP id 9B78B37B416 for ; Wed, 26 Dec 2001 09:17:40 -0800 (PST) Received: from columbia ([12.93.215.57]) by mtiwmhc26.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011226171739.IKRM13869.mtiwmhc26.worldnet.att.net@columbia>; Wed, 26 Dec 2001 17:17:39 +0000 From: "Andrew C. Hornback" To: "Frank Milner" , Subject: RE: software Date: Wed, 26 Dec 2001 12:15:25 -0500 Message-ID: <005f01c18e30$e875e760$6600000a@ach.domain> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal In-Reply-To: <3C29D88C.54F4042F@pathcom.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Frank Milner > Sent: Wednesday, December 26, 2001 9:03 AM > To: freebsd-questions@FreeBSD.ORG > Subject: software > > Dear FreeBSDm > > This no doubt sounds like a naive question, but will Windows > applications run under FreeBSD? If not, what everyday word processors, > spreadsheets, utlilities, etc., can be used with this operating system? > Perhaps Star Office applications? > > In other words, is FreeBSD suitable in anyway for the standalone > desktop? If you're looking for a general purpose desktop solution for FreeBSD, and you're familiar with the way that Windows works, I'd recommend: FreeBSD 4.4-Release XFree86 3.3.6 KDE 2.2 or higher. This combination will give you what you're looking for. KDE has a suite of included applications that have a similar look and feel to the Office applications that you're used to on a Microsoft platform. Star Office also works quite well on FreeBSD platforms, along with other alternatives such as ApplixWare, etc. Those are a few options, and yes, FreeBSD is suitable for the stand-alone desktop, but in a networked environment is where it really shines. --- Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:44:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gaia.nimnet.asn.au (nimbin.lnk.telstra.net [139.130.45.143]) by hub.freebsd.org (Postfix) with ESMTP id EE60637B405 for ; Wed, 26 Dec 2001 09:44:32 -0800 (PST) Received: from localhost (smithi@localhost) by gaia.nimnet.asn.au (8.8.8/8.8.8R1.2) with SMTP id EAA18866; Thu, 27 Dec 2001 04:44:24 +1100 (EST) (envelope-from smithi@nimnet.asn.au) Date: Thu, 27 Dec 2001 04:44:24 +1100 (EST) From: Ian Smith Reply-To: Ian Smith To: Joe & Fhe Barbish Cc: questions@FreeBSD.ORG Subject: Dos -> Unix end-of-line conversion In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I want to roll the /etc/ tree files with all kinds of txt files > but text in content only, not in file names, and convert them > in mass on there way to the floppy drive that's going to a windows > sys. How can I do this on the command line? # zip -l@ dosfiles.zip < yourlist find is handy for making yourlist, as has been mentioned; edit to taste. Conversely, 'unzip -a dosfiles.zip' restores CRLF->LF (or CR->LF for Mac files). Check 'man zip' for the -l and -ll options and 'man unzip' for the -a and -aa options. These options may be used (inversely) with DOS/win zip/unzip too, and of course you'll fit something like 3-4Mb of compressed text on the floppy. Cheers, Ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:52: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from eamail1-out.unisys.com (eamail1-out.unisys.com [192.61.61.99]) by hub.freebsd.org (Postfix) with ESMTP id D878937B405 for ; Wed, 26 Dec 2001 09:51:56 -0800 (PST) Received: from us-ea-gtwy-8.ea.unisys.com (us-ea-gtwy-8.ea.unisys.com [192.61.145.108]) by eamail1-out.unisys.com (8.9.3/8.9.3) with ESMTP id RAA12602 for ; Wed, 26 Dec 2001 17:49:18 GMT Received: by us-ea-gtwy-8.ea.unisys.com with Internet Mail Service (5.5.2653.19) id ; Wed, 26 Dec 2001 11:51:56 -0600 Message-ID: From: "Murphy, Derrick" To: "'freebsd-questions@FreeBSD.ORG'" Subject: question about bsd Date: Wed, 26 Dec 2001 11:56:16 -0600 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram and a floppy drive. The hd is 200Mb What kind of unix could i install on this? Im guessing it would have to be a pretty old version to work with so little. If anyone knows of any free unix versions that would work with this, please let me know ^_^ Thanks -f0rmat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 9:58:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 4864837B405 for ; Wed, 26 Dec 2001 09:58:30 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id LAA13118 for ; Wed, 26 Dec 2001 11:58:28 -0600 (CST) Message-Id: <3.0.5.32.20011226115827.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Wed, 26 Dec 2001 11:58:27 -0600 To: freebsd-questions@freebsd.org From: jacks@sage-american.com Subject: FTPD start/restart Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Guess. I'm having a senior moment, but I would like to stop the ftpd service (normally launched from inetd) and then restart with new parameters like: #/usr/libexec/ftpd -lS Would I stop with #kill HUP ftpd #then run the above to restart? I know, pretty basic....but...still unsure.... Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10: 6:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freyr.cba.ualr.edu (freyr.cba.ualr.edu [144.167.120.20]) by hub.freebsd.org (Postfix) with ESMTP id B5B0537B405 for ; Wed, 26 Dec 2001 10:06:09 -0800 (PST) Received: (from joe@localhost) by freyr.cba.ualr.edu (8.11.6/8.11.6) id fBQI4Yf03451; Wed, 26 Dec 2001 12:04:34 -0600 (CST) (envelope-from joe) Date: Wed, 26 Dec 2001 12:04:34 -0600 From: "Joseph E. Royce" To: "Murphy, Derrick" Cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: question about bsd Message-ID: <20011226120434.A3348@freyr.cba.ualr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Derrick.Murphy@unisys.com on Wed, Dec 26, 2001 at 11:56:16AM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 11:56:16AM -0600, Murphy, Derrick wrote: > I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram and > a floppy drive. The hd is 200Mb What kind of unix could i install on > this? Im guessing it would have to be a pretty old version to work with so > little. If anyone knows of any free unix versions that would work with > this, please let me know ^_^ Thanks > > -f0rmat A minimal install of the lastest NetBSD release will work on that laptop. See: http://www.netbsd.org/Ports/i386/hardware.html HTH, Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10:21:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from m-net.arbornet.org (m-net.arbornet.org [209.142.209.161]) by hub.freebsd.org (Postfix) with ESMTP id C7BA337B405; Wed, 26 Dec 2001 10:21:30 -0800 (PST) Received: (from ceesaxp@localhost) by m-net.arbornet.org (8.11.4/8.11.2) id fBQHmww31524; Wed, 26 Dec 2001 12:48:58 -0500 (EST) (envelope-from ceesaxp) Date: Wed, 26 Dec 2001 12:48:58 -0500 From: Andrei Popov To: Dan Nelson Cc: freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: Swap not used *at**all* Message-ID: <20011226124857.A30355@m-net.arbornet.org> References: <20011226091540.A70996@m-net.arbornet.org> <20011226151905.GA84869@dan.emsphone.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.2.5i In-Reply-To: <20011226151905.GA84869@dan.emsphone.com>; from dnelson@allantgroup.com on Wed, Dec 26, 2001 at 09:19:05AM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 09:19:05AM -0600, Dan Nelson wrote: > In the last episode (Dec 26), Andrei Popov said: > >=20 > > Is this normal: > >=20 > > andrei@vogon:~ > > 2:05:49pm% swapinfo > > Device 1K-blocks Used Avail Capacity Type > > /dev/ad4s1b 525344 0 525344 0% Interleaved > >=20 > > This machine is running with 256MB RAM and a 512MB swap device. Swap u= sage > > is zero even when running X and postgress and aolserver with a running > > instance of OpenACS-4. >=20 > Try this:=20 >=20 > dd if=3D/dev/zero of=3D/dev/null bs=3D192m count=3D1 >=20 > That should force some swapping :) It sure does :) But the question still remains -- is it not odd that there's no swapping when running X, nor is there one when running fairly expenm=7Fsive Postgres selects et al? > =20 > --=20 > Dan Nelson > dnelson@allantgroup.com -- Andrei To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10:32:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id B83BF37B41A; Wed, 26 Dec 2001 10:32:23 -0800 (PST) Received: (from dan@localhost) by dan.emsphone.com (8.11.6/8.11.6) id fBQIWLC91821; Wed, 26 Dec 2001 12:32:21 -0600 (CST) (envelope-from dan) Date: Wed, 26 Dec 2001 12:32:21 -0600 From: Dan Nelson To: Andrei Popov Cc: freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: Swap not used *at**all* Message-ID: <20011226183221.GA20596@dan.emsphone.com> References: <20011226091540.A70996@m-net.arbornet.org> <20011226151905.GA84869@dan.emsphone.com> <20011226124857.A30355@m-net.arbornet.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: <20011226124857.A30355@m-net.arbornet.org> User-Agent: Mutt/1.3.24i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Dec 26), Andrei Popov said: > On Wed, Dec 26, 2001 at 09:19:05AM -0600, Dan Nelson wrote: > > In the last episode (Dec 26), Andrei Popov said: > > > Is this normal: > > > > > > Device 1K-blocks Used Avail Capacity Type > > > /dev/ad4s1b 525344 0 525344 0% Interleaved > > >=20 > > > This machine is running with 256MB RAM and a 512MB swap device.=20 > > > Swap usage is zero even when running X and postgress and > > > aolserver with a running instance of OpenACS-4. > >=20 > > Try this: dd if=3D/dev/zero of=3D/dev/null bs=3D192m count=3D1. That > > should force some swapping :) >=20 > It sure does :) >=20 > But the question still remains -- is it not odd that there's no > swapping when running X, nor is there one when running fairly > expenm=7Fsive Postgres selects et al? Not necessarily. It depends on your configuration. If you tell Postgres to use (say) 192MB of memory, then it will definitely swap, just like the dd did. If you only configure it for 64MB, then it could easily coexist with X, Netscape, and other medium-memory-use applications without swapping. I wouldn't expect AOLServer to consume much memory at all. As comparison, I have a 512MB box that runs mysql (256MB), squid (75MB), and roxen (20MB), and occasionally X+mozilla (64MB). It has 30MB of swap used at the moment, which was probably just used once. --=20 Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10:34:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clink.schulte.org (clink.schulte.org [209.134.156.193]) by hub.freebsd.org (Postfix) with ESMTP id 66E5F37B419 for ; Wed, 26 Dec 2001 10:34:39 -0800 (PST) Received: from schulte-laptop.nospam.schulte.org (nb-65.netbriefings.com [209.134.134.65]) by clink.schulte.org (Postfix) with ESMTP id E24EC2440D; Wed, 26 Dec 2001 12:34:29 -0600 (CST) Message-Id: <5.1.0.14.0.20011226123229.03bf9ff8@pop3s.schulte.org> X-Sender: X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 26 Dec 2001 12:34:04 -0600 To: jacks@sage-american.com, freebsd-questions@freebsd.org From: Christopher Schulte Subject: Re: FTPD start/restart In-Reply-To: <3.0.5.32.20011226115827.01691728@mail.sage-american.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Edit the start flags in /etc/inetd.conf and issue this command # killall -HUP inetd or # kill -HUP `cat /var/run/inetd.pid` At 11:58 AM 12/26/2001 -0600, jacks@sage-american.com wrote: >Guess. I'm having a senior moment, but I would like to stop the ftpd >service (normally launched from inetd) and then restart with new parameters >like: >#/usr/libexec/ftpd -lS > >Would I stop with >#kill HUP ftpd #then run the above to restart? > >I know, pretty basic....but...still unsure.... > >Best regards, >Jack L. Stone, >Server Admin > >Sage-American >http://www.sage-american.com >jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10:35:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from catalyst.sasknow.net (catalyst.sasknow.net [207.195.92.130]) by hub.freebsd.org (Postfix) with ESMTP id 6DA4637B405 for ; Wed, 26 Dec 2001 10:35:09 -0800 (PST) Received: from localhost (ryan@localhost) by catalyst.sasknow.net (8.11.6/8.11.6) with ESMTP id fBQIbei15109; Wed, 26 Dec 2001 12:37:41 -0600 (CST) (envelope-from ryan@sasknow.com) X-Authentication-Warning: catalyst.sasknow.net: ryan owned process doing -bs Date: Wed, 26 Dec 2001 12:37:40 -0600 (CST) From: Ryan Thompson X-X-Sender: To: Cc: Subject: Re: FTPD start/restart In-Reply-To: <3.0.5.32.20011226115827.01691728@mail.sage-american.com> Message-ID: <20011226123314.N15096-100000@catalyst.sasknow.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG jacks@sage-american.com wrote to freebsd-questions@FreeBSD.ORG: > Guess. I'm having a senior moment, but I would like to stop the > ftpd service (normally launched from inetd) and then restart with > new parameters like: If you are indeed running ftpd from inetd, then you'll need to edit the appropriate line in /etc/inetd.conf, and restart inetd: kill -HUP `cat /var/run/inetd.pid` Note that there is NO ftpd daemon process to kill, because inetd listens for connections, and simply forks an individual ftpd process for each request. There ARE other ftpds (ProFTPd, in the ports, comes to mind) that can be run as a standalone daemon. (i.e., not from inetd). If you find yourself in this boat now or later, then you WOULD want to do something similar to what you outline below (the exact syntax will vary): > #/usr/libexec/ftpd -lS > > Would I stop with > #kill HUP ftpd #then run the above to restart? > > I know, pretty basic....but...still unsure.... Hope this helps, - Ryan -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 10:40:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 1799B37B416 for ; Wed, 26 Dec 2001 10:40:05 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id MAA21676; Wed, 26 Dec 2001 12:39:53 -0600 (CST) Message-Id: <3.0.5.32.20011226123949.01691728@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Wed, 26 Dec 2001 12:39:49 -0600 To: Ryan Thompson From: jacks@sage-american.com Subject: Re: FTPD start/restart Cc: In-Reply-To: <20011226123314.N15096-100000@catalyst.sasknow.net> References: <3.0.5.32.20011226115827.01691728@mail.sage-american.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ryan & Christopher: You have it.... that's it. Not seeing the PID had me going for a moment, but then remembered it was part of inetd. ....thanks for clearing this up! Happy Holidays! At 12:37 PM 12.26.2001 -0600, Ryan Thompson wrote: >jacks@sage-american.com wrote to freebsd-questions@FreeBSD.ORG: > >> Guess. I'm having a senior moment, but I would like to stop the >> ftpd service (normally launched from inetd) and then restart with >> new parameters like: > >If you are indeed running ftpd from inetd, then you'll need to edit >the appropriate line in /etc/inetd.conf, and restart inetd: > > kill -HUP `cat /var/run/inetd.pid` > >Note that there is NO ftpd daemon process to kill, because inetd >listens for connections, and simply forks an individual ftpd process >for each request. > >There ARE other ftpds (ProFTPd, in the ports, comes to mind) that can >be run as a standalone daemon. (i.e., not from inetd). If you find >yourself in this boat now or later, then you WOULD want to do >something similar to what you outline below (the exact syntax will >vary): > >> #/usr/libexec/ftpd -lS >> >> Would I stop with >> #kill HUP ftpd #then run the above to restart? >> >> I know, pretty basic....but...still unsure.... > > >Hope this helps, >- Ryan > >-- > Ryan Thompson > Network Administrator, Accounts > > SaskNow Technologies - http://www.sasknow.com > #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 > > Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon > Toll-Free: 877-727-5669 (877-SASKNOW) North America > > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11: 3:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 8552437B405 for ; Wed, 26 Dec 2001 11:03:56 -0800 (PST) Received: from onceler.kciLink.com (onceler.kciLink.com [216.194.193.106]) by yertle.kciLink.com (Postfix) with ESMTP id 0182A1E877 for ; Wed, 26 Dec 2001 14:03:56 -0500 (EST) Received: (from khera@localhost) by onceler.kciLink.com (8.11.6/8.11.6) id fBQJ3tA92147 for freebsd-questions@freebsd.org; Wed, 26 Dec 2001 14:03:55 -0500 (EST) (envelope-from khera) Date: Wed, 26 Dec 2001 14:03:55 -0500 (EST) Message-Id: <200112261903.fBQJ3tA92147@onceler.kciLink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Vivek Khera To: freebsd-questions@freebsd.org Subject: Re: /etc/ftpaccess, chroot, and `guest-root' directive. Newsgroups: ml.freebsd.questions References: <39549.1009326198@monkeys.com> X-Trace: lorax.kciLink.com 1009391225 49890 216.194.193.106 (26 Dec 2001 18:27:05 GMT) X-Complaints-To: daemon@kciLink.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "RFG" == Ronald F Guilmette writes: RFG> From the ftpd man page: RFG> Ftpd interprets file names according to the ``globbing'' RFG> conventions used by csh(1)... RFG> Ok, so why isn't it doing the ``globbing'' in the case of the RFG> guest-root directive as expected? The man page for ftpd on FreeBSD 4.4+ has no mention of the /etc/ftpaccess file. Perhaps you want to use the /etc/ftpchroot file or login classes for your unpriveledged users. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:17: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-45.quicksilver.net.nz [202.89.142.45]) by hub.freebsd.org (Postfix) with ESMTP id C66EB37B405 for ; Wed, 26 Dec 2001 11:16:55 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBQJIfu91663; Thu, 27 Dec 2001 08:18:41 +1300 (NZDT) (envelope-from jonc) Date: Thu, 27 Dec 2001 08:18:39 +1300 From: Jonathan Chen To: Fuji Zhang Cc: freebsd-questions@FreeBSD.ORG Subject: Re: defragment disk Message-ID: <20011227081839.A91370@grimoire.chen.org.nz> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from fzhang3@csd.uwo.ca on Wed, Dec 26, 2001 at 09:36:05AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 09:36:05AM -0500, Fuji Zhang wrote: > seasons greetings! does anybody know what the utility for defragment the > hard disk is? UFS filesystems don't require a defragmenting utility; they do it as required, on the fly. -- Jonathan Chen ---------------------------------------------------------------------- Power corrupts, Absolute Power is pretty neat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:17:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from elvis.mu.org (elvis.mu.org [216.33.66.196]) by hub.freebsd.org (Postfix) with ESMTP id 128E337B405; Wed, 26 Dec 2001 11:17:33 -0800 (PST) Received: by elvis.mu.org (Postfix, from userid 1192) id 8991481D01; Wed, 26 Dec 2001 13:17:27 -0600 (CST) Date: Wed, 26 Dec 2001 13:17:27 -0600 From: Alfred Perlstein To: Andrei Popov Cc: Dan Nelson , freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: Swap not used *at**all* Message-ID: <20011226131727.M91594@elvis.mu.org> References: <20011226091540.A70996@m-net.arbornet.org> <20011226151905.GA84869@dan.emsphone.com> <20011226124857.A30355@m-net.arbornet.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.2.5i In-Reply-To: <20011226124857.A30355@m-net.arbornet.org>; from ceesaxp@m-net.arbornet.org on Wed, Dec 26, 2001 at 12:48:58PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Andrei Popov [011226 12:21] wrote: > On Wed, Dec 26, 2001 at 09:19:05AM -0600, Dan Nelson wrote: > > In the last episode (Dec 26), Andrei Popov said: > > >=20 > > > Is this normal: > > >=20 > > > andrei@vogon:~ > > > 2:05:49pm% swapinfo > > > Device 1K-blocks Used Avail Capacity Type > > > /dev/ad4s1b 525344 0 525344 0% Interleaved > > >=20 > > > This machine is running with 256MB RAM and a 512MB swap device. Swap= usage > > > is zero even when running X and postgress and aolserver with a running > > > instance of OpenACS-4. > >=20 > > Try this:=20 > >=20 > > dd if=3D/dev/zero of=3D/dev/null bs=3D192m count=3D1 > >=20 > > That should force some swapping :) >=20 > It sure does :) >=20 > But the question still remains -- is it not odd that there's no swapping > when running X, nor is there one when running fairly expenm=7Fsive Postgr= es > selects et al? No, the system tries pretty hard not to swap. In fact swapping is really a bad thing to have happen on a loaded machine as it can result in a cascade failure. If you look in the archives for Matt Dillon's postings on "cascade failure" it will explain things a lot better. --=20 -Alfred Perlstein [alfred@freebsd.org] 'Instead of asking why a piece of software is using "1970s technology," start asking why software is ignoring 30 years of accumulated wisdom.' Tax deductable donations for FreeBSD: http://www.freebsdfoundation.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:23:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sdsl-216-36-101-146.dsl.chi.megapath.net (sdsl-216-36-101-146.dsl.chi.megapath.net [216.36.101.146]) by hub.freebsd.org (Postfix) with SMTP id 641E437B405 for ; Wed, 26 Dec 2001 11:23:17 -0800 (PST) Received: (qmail 15189 invoked from network); 26 Dec 2001 19:23:36 -0000 Received: from apu.five.sight (HELO apu.five.sight.fivesight.com) (lucas@192.168.0.102) by wiggum.five.sight with SMTP; 26 Dec 2001 19:23:36 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15402.9140.616762.608972@apu.five.sight> Date: Wed, 26 Dec 2001 13:23:32 -0600 To: Fuji Zhang From: Lucas Bergman Cc: questions@freebsd.org Subject: Re: defragment disk In-Reply-To: References: X-Mailer: VM 6.96 under 21.4 (patch 5) "Civil Service" XEmacs Lucid Reply-To: lucas@slb.to Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > seasons greetings! Hi. > does anybody know what the utility for defragment the hard disk is? As long as you're using the (default) UFS filesystem, you don't need it. The "fragmentation" alluded to by fsck is not the same as the fragmentation of DOS filesystems. Don't worry about it. Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:33:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pianosa.catch22.org (pianosa.catch22.org [64.81.48.19]) by hub.freebsd.org (Postfix) with ESMTP id 4441A37B417 for ; Wed, 26 Dec 2001 11:33:16 -0800 (PST) Received: by pianosa.catch22.org (Postfix, from userid 1006) id E12CD356; Wed, 26 Dec 2001 11:33:15 -0800 (PST) Date: Wed, 26 Dec 2001 11:33:15 -0800 From: Danny Howard To: Joel Dinel Cc: freebsd-questions@freebsd.org Subject: Re: processes et jobs Message-ID: <20011226113315.A29850@pianosa.catch22.org> References: <003e01c18c8e$beb71a00$063215ac@retis.fr> <200112250109.fBP19A258599@fedde.littleton.co.us> <20011224202119.A75845@sunder.touchtunes.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011224202119.A75845@sunder.touchtunes.com>; from dinjo@touchtunes.com on Mon, Dec 24, 2001 at 08:21:19PM -0500 X-Loop: djhoward@uiuc.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Dec 24, 2001 at 08:21:19PM -0500, Joel Dinel wrote: > He wants to know how to start a job in background on one terminal, and > bring it back to foreground on another terminal. [... 42 lines ...] And the answer is, screen. cd /usr/ports/misc/screen && make install New screen: screen Detach: control-a d Recall screen: screen -r -danny To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:50: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from winston.freebsd.org (adsl-64-173-15-98.dsl.sntc01.pacbell.net [64.173.15.98]) by hub.freebsd.org (Postfix) with ESMTP id 71A3B37B416 for ; Wed, 26 Dec 2001 11:49:57 -0800 (PST) Received: from winston.freebsd.org (jkh@localhost [127.0.0.1]) by winston.freebsd.org (8.11.6/8.11.6) with ESMTP id fBQJnWG45144; Wed, 26 Dec 2001 11:49:32 -0800 (PST) (envelope-from jkh@winston.freebsd.org) To: Andrei Popov Cc: Dan Nelson , freebsd-questions@FreeBSD.ORG Subject: Re: Swap not used *at**all* In-Reply-To: Message from Andrei Popov of "Wed, 26 Dec 2001 12:48:58 EST." <20011226124857.A30355@m-net.arbornet.org> Date: Wed, 26 Dec 2001 11:49:32 -0800 Message-ID: <45140.1009396172@winston.freebsd.org> From: Jordan Hubbard Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [ This is not a discussion relevant to -current and should have started and stayed in -questions; editing cc line ] > But the question still remains -- is it not odd that there's no swapping > when running X, nor is there one when running fairly expenmsive Postgres > selects et al? Not really. 256MB is not exactly a feeble memory configuration and FreeBSD is pretty good about paging from large executables rather than having the whole pile of goop in memory at once - it's more than likely that you simply have no need to swap. Run top and check the vm counters while this stuff runs. - Jordan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:51:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 19F2637B416 for ; Wed, 26 Dec 2001 11:51:06 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Wed, 26 Dec 2001 14:53:15 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Cc: Subject: RE: Modem device not configured Date: Wed, 26 Dec 2001 14:51:00 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-reply-to: <005a01c18e30$30a245c0$6600000a@ach.domain> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Having a lot of problems getting FBSD 4.4 to use internial modems. And before you go there, yes it is not a winmodem. I found the following way back in the archives 3/6/2000. "(Take a look at your /usr/src/sys/isa/sio.c file. You should see a section beginning with: static struct isa_pnp_id sio_ids[] which lists a bunch of modems and their pnp ids. You need to add your pnp id for your modem (you can type pnpinfo to get this info) into this file and then recompile your kernel. unknown0: at port 0x3e8-0x3ef irq 5 on isa0 The line I've added to sio.c is: {0x3024a341, NULL}, /* PMC2430 - Pace 56 Voice Internal Modem */ Why did it work before under 3.x, without this line in sio.c? The PNP bios preconfigured it and left it laying around in port space, so the old-style isa probes "found" it there. Under 4.0, the isa code is much more pnp centric. It was possible for an isa probe to find a "stray" device and then for the PNP device id to match and then fail due to resource conflicts. So, it disables the programmable cards first so this double probing cannot happen. It also means that it needs to know the PNP id's for supported pnp hardware. Making this more user tweakable is on the TODO list.}" Ok here we are at 4.4 and there still is no documentation on the tables in sio.c and how this affects internal PNP pci modems in FBSD. The pnpinfo command finds nothing. Looks like it is looking in the wrong place, The 3.x location and not the 4.x location. Looking at sio.c and doing a find for 'static struc' I find two different tables. Snip static struct pci_ids pci_ids[] = { { 0x100812b9, "3COM PCI FaxModem", 0x10 }, { 0x048011c1, "ActionTec 56k FAX PCI Modem", 0x14 }, { 0x0000151f, "SmartLink 5634PCV SurfRider", 0x10 }, { 0x01101407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, { 0x01111407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, { 0x00000000, NULL, 0 } Snip static struct isa_pnp_id sio_ids[] = { {0x0005d041, "Standard PC COM port"}, /* PNP0500 */ {0x0105d041, "16550A-compatible COM port"}, /* PNP0501 */ {0x0205d041, "Multiport serial device (non-intelligent 16550)"}, /* PNP0502 */ {0x1005d041, "Generic IRDA-compatible device"}, /* PNP0510 */ {0x1105d041, "Generic IRDA-compatible device"}, /* PNP0511 */ /* Devices that do not have a compatid */ {0x12206804, NULL}, /* ACH2012 - 5634BTS 56K Video Ready Modem */ {0x7602a904, NULL}, /* AEI0276 - 56K v.90 Fax Modem (LKT) */ {0x00007905, NULL}, /* AKY0000 - 56K Plug&Play Modem */ {0x01405407, NULL}, /* AZT4001 - AZT3000 PnP SOUND DEVICE, MODEM */ {0x56039008, NULL}, /* BDP0356 - Best Data 56x2 */ {0x56159008, NULL}, /* BDP1556 - B.D. Smart One 56SPS,Voice Modem*/ {0x36339008, NULL}, /* BDP3336 - Best Data Prods. 336F */ {0x0014490a, NULL}, /* BRI1400 - Boca 33.6 PnP */ {0x0015490a, NULL}, /* BRI1500 - Internal Fax Data */ {0x0034490a, NULL}, /* BRI3400 - Internal ACF Modem */ {0x0094490a, NULL}, /* BRI9400 - Boca K56Flex PnP */ {0x00b4490a, NULL}, /* BRIB400 - Boca 56k PnP */ {0x0030320d, NULL}, /* CIR3000 - Cirrus Logic V43 */ {0x0100440e, NULL}, /* CRD0001 - Cardinal MVP288IV ? */ {0x36033610, NULL}, /* DAV0336 - DAVICOM 336PNP MODEM */ {0x0000aa1a, NULL}, /* FUJ0000 - FUJITSU Modem 33600 PNP/I2 */ {0x1200c31e, NULL}, /* GVC0012 - VF1128HV-R9 (win modem?) */ {0x0303c31e, NULL}, /* GVC0303 - MaxTech 33.6 PnP D/F/V */ {0x0505c31e, NULL}, /* GVC0505 - GVC 56k Faxmodem */ {0x0116c31e, NULL}, /* GVC1601 - Rockwell V.34 Plug & Play Modem */ {0x0050c31e, NULL}, /* GVC5000 - some GVC modem */ {0x3800f91e, NULL}, /* GWY0038 - Telepath with v.90 */ {0x9062f91e, NULL}, /* GWY6290 - Telepath with x2 Technology */ {0x8100e425, NULL}, /* IOD0081 - I-O DATA DEVICE,INC. IFML-560 */ {0x21002534, NULL}, /* MAE0021 - Jetstream Int V.90 56k Voice Series 2*/ {0x0000f435, NULL}, /* MOT0000 - Motorola ModemSURFR 33.6 Intern */ {0x5015f435, NULL}, /* MOT1550 - Motorola ModemSURFR 56K Modem */ {0xf015f435, NULL}, /* MOT15F0 - Motorola VoiceSURFR 56K Modem */ {0x6045f435, NULL}, /* MOT4560 - Motorola ? */ {0x61e7a338, NULL}, /* NECE761 - 33.6Modem */ {0x08804f3f, NULL}, /* OZO8008 - Zoom (33.6k Modem) */ {0x0f804f3f, NULL}, /* OZO800f - Zoom 2812 (56k Modem) */ {0x39804f3f, NULL}, /* OZO8039 - Zoom 56k flex */ {0x00914f3f, NULL}, /* OZO9100 - Zoom 2919 (K56 Faxmodem) */ {0x3024a341, NULL}, /* PMC2430 - Pace 56 Voice Internal Modem */ {0x1000eb49, NULL}, /* ROK0010 - Rockwell ? */ {0x1200b23d, NULL}, /* RSS0012 - OMRON ME5614ISA */ {0x5002734a, NULL}, /* RSS0250 - 5614Jx3(G) Internal Modem */ {0x6202734a, NULL}, /* RSS0262 - 5614Jx3[G] V90+K56Flex Modem */ {0xc100ad4d, NULL}, /* SMM00C1 - Leopard 56k PnP */ {0x9012b04e, NULL}, /* SUP1290 - Supra ? */ {0x1013b04e, NULL}, /* SUP1310 - SupraExpress 336i PnP */ {0x8013b04e, NULL}, /* SUP1380 - SupraExpress 288i PnP Voice */ {0x8113b04e, NULL}, /* SUP1381 - SupraExpress 336i PnP Voice */ {0x5016b04e, NULL}, /* SUP1650 - Supra 336i Sp Intl */ {0x7016b04e, NULL}, /* SUP1670 - Supra 336i V+ Intl */ {0x7420b04e, NULL}, /* SUP2070 - Supra ? */ {0x8020b04e, NULL}, /* SUP2080 - Supra ? */ {0x8420b04e, NULL}, /* SUP2084 - SupraExpress 56i PnP */ {0x7121b04e, NULL}, /* SUP2171 - SupraExpress 56i Sp? */ {0x8024b04e, NULL}, /* SUP2480 - Supra ? */ {0x01007256, NULL}, /* USR0001 - U.S. Robotics Inc., Sportster W */ {0x02007256, NULL}, /* USR0002 - U.S. Robotics Inc. Sportster 33. */ {0x04007256, NULL}, /* USR0004 - USR Sportster 14.4k */ {0x06007256, NULL}, /* USR0006 - USR Sportster 33.6k */ {0x11007256, NULL}, /* USR0011 - USR ? */ {0x01017256, NULL}, /* USR0101 - USR ? */ {0x30207256, NULL}, /* USR2030 - U.S.Robotics Inc. Sportster 560 */ {0x50207256, NULL}, /* USR2050 - U.S.Robotics Inc. Sportster 33. */ {0x70207256, NULL}, /* USR2070 - U.S.Robotics Inc. Sportster 560 */ {0x30307256, NULL}, /* USR3030 - U.S. Robotics 56K FAX INT */ {0x31307256, NULL}, /* USR3031 - U.S. Robotics 56K FAX INT */ {0x50307256, NULL}, /* USR3050 - U.S. Robotics 56K FAX INT */ {0x70307256, NULL}, /* USR3070 - U.S. Robotics 56K Voice INT */ {0x90307256, NULL}, /* USR3090 - USR ? */ {0x70917256, NULL}, /* USR9170 - U.S. Robotics 56K FAX INT */ {0x90917256, NULL}, /* USR9190 - USR 56k Voice INT */ {0x0300695c, NULL}, /* WCI0003 - Fax/Voice/Modem/Speakphone/Asvd */ {0x01a0896a, NULL}, /* ZTIA001 - Zoom Internal V90 Faxmodem */ {0x61f7896a, NULL}, /* ZTIF761 - Zoom ComStar 33.6 */ {0} }; Snip I added sio2 and 3 with out disable to kernel conf and compiled kernel this is what I found in my boot log with boot -v for verbose boot messages found-> vendor=0x11c1, dev=0x0480, revid=0x00 class=07-03-03, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base e3001000, size 8 map[14]: type 1, range 32, base 0000dc00, size 8 map[18]: type 1, range 32, base 0000e000, size 8 map[1c]: type 1, range 32, base 0000e400, size 3 pci0: (vendor=0x11c1, dev=0x0480) at 18.0 irq 9 This is my zoom 56K pci plus modem that has onboard controller and dsp sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: irq maps: 0x41 0x41 0x41 0x41 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0 sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: irq maps: 0x41 0x41 0x41 0x41 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0 You can see that my modem vendor/dev codes match the actiontec modem all ready defined. pci0: (vendor=0x11c1, dev=0x0480) at 18.0 irq 9 This is my zoom 56K pci plus modem that has onboard controller and dsp static struct pci_ids pci_ids[] = { { 0x048011c1, "ActionTec 56k FAX PCI Modem", 0x14 }, I am at a loss of what to do next. For sure need info on what the function is of these two tables in sio.c along with The meaning of the fields in the tables and where or how to get that info so I can Edit the table entry for my modem. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 11:58:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 3521B37B423 for ; Wed, 26 Dec 2001 11:58:23 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Wed, 26 Dec 2001 15:00:33 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: sio.c & internial modems Date: Wed, 26 Dec 2001 14:58:19 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-reply-to: <005a01c18e30$30a245c0$6600000a@ach.domain> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Having a lot of problems getting FBSD 4.4 to use internal modems. And before you go there, yes it is not a winmodem. I found the following way back in the archives 3/6/2000. "(Take a look at your /usr/src/sys/isa/sio.c file. You should see a section beginning with: static struct isa_pnp_id sio_ids[] which lists a bunch of modems and their pnp ids. You need to add your pnp id for your modem (you can type pnpinfo to get this info) into this file and then recompile your kernel. unknown0: at port 0x3e8-0x3ef irq 5 on isa0 The line I've added to sio.c is: {0x3024a341, NULL}, /* PMC2430 - Pace 56 Voice Internal Modem */ Why did it work before under 3.x, without this line in sio.c? The PNP bios preconfigured it and left it laying around in port space, so the old-style isa probes "found" it there. Under 4.0, the isa code is much more pnp centric. It was possible for an isa probe to find a "stray" device and then for the PNP device id to match and then fail due to resource conflicts. So, it disables the programmable cards first so this double probing cannot happen. It also means that it needs to know the PNP id's for supported pnp hardware. Making this more user tweakable is on the TODO list.}" Ok here we are at 4.4 and there still is no documentation on the tables in sio.c and how this affects internal PNP pci modems in FBSD. The pnpinfo command finds nothing. I think it is looking in the wrong place, The 3.x location and not the 4.x location. Pnpinfo needs to be updated. Looking at sio.c and doing a find for 'static struc' I find two different tables. Snip static struct pci_ids pci_ids[] = { { 0x100812b9, "3COM PCI FaxModem", 0x10 }, { 0x048011c1, "ActionTec 56k FAX PCI Modem", 0x14 }, { 0x0000151f, "SmartLink 5634PCV SurfRider", 0x10 }, { 0x01101407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, { 0x01111407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, { 0x00000000, NULL, 0 } Snip static struct isa_pnp_id sio_ids[] = { {0x0005d041, "Standard PC COM port"}, /* PNP0500 */ {0x0105d041, "16550A-compatible COM port"}, /* PNP0501 */ {0x0205d041, "Multiport serial device (non-intelligent 16550)"}, /* PNP0502 */ {0x1005d041, "Generic IRDA-compatible device"}, /* PNP0510 */ {0x1105d041, "Generic IRDA-compatible device"}, /* PNP0511 */ /* Devices that do not have a compatid */ {0x12206804, NULL}, /* ACH2012 - 5634BTS 56K Video Ready Modem */ {0x7602a904, NULL}, /* AEI0276 - 56K v.90 Fax Modem (LKT) */ {0x00007905, NULL}, /* AKY0000 - 56K Plug&Play Modem */ {0x01405407, NULL}, /* AZT4001 - AZT3000 PnP SOUND DEVICE, MODEM */ {0x56039008, NULL}, /* BDP0356 - Best Data 56x2 */ {0x56159008, NULL}, /* BDP1556 - B.D. Smart One 56SPS,Voice Modem*/ {0x36339008, NULL}, /* BDP3336 - Best Data Prods. 336F */ {0x0014490a, NULL}, /* BRI1400 - Boca 33.6 PnP */ {0x0015490a, NULL}, /* BRI1500 - Internal Fax Data */ {0x0034490a, NULL}, /* BRI3400 - Internal ACF Modem */ {0x0094490a, NULL}, /* BRI9400 - Boca K56Flex PnP */ {0x00b4490a, NULL}, /* BRIB400 - Boca 56k PnP */ {0x0030320d, NULL}, /* CIR3000 - Cirrus Logic V43 */ {0x0100440e, NULL}, /* CRD0001 - Cardinal MVP288IV ? */ {0x36033610, NULL}, /* DAV0336 - DAVICOM 336PNP MODEM */ {0x0000aa1a, NULL}, /* FUJ0000 - FUJITSU Modem 33600 PNP/I2 */ {0x1200c31e, NULL}, /* GVC0012 - VF1128HV-R9 (win modem?) */ {0x0303c31e, NULL}, /* GVC0303 - MaxTech 33.6 PnP D/F/V */ {0x0505c31e, NULL}, /* GVC0505 - GVC 56k Faxmodem */ {0x0116c31e, NULL}, /* GVC1601 - Rockwell V.34 Plug & Play Modem */ {0x0050c31e, NULL}, /* GVC5000 - some GVC modem */ {0x3800f91e, NULL}, /* GWY0038 - Telepath with v.90 */ {0x9062f91e, NULL}, /* GWY6290 - Telepath with x2 Technology */ {0x8100e425, NULL}, /* IOD0081 - I-O DATA DEVICE,INC. IFML-560 */ {0x21002534, NULL}, /* MAE0021 - Jetstream Int V.90 56k Voice Series 2*/ {0x0000f435, NULL}, /* MOT0000 - Motorola ModemSURFR 33.6 Intern */ {0x5015f435, NULL}, /* MOT1550 - Motorola ModemSURFR 56K Modem */ {0xf015f435, NULL}, /* MOT15F0 - Motorola VoiceSURFR 56K Modem */ {0x6045f435, NULL}, /* MOT4560 - Motorola ? */ {0x61e7a338, NULL}, /* NECE761 - 33.6Modem */ {0x08804f3f, NULL}, /* OZO8008 - Zoom (33.6k Modem) */ {0x0f804f3f, NULL}, /* OZO800f - Zoom 2812 (56k Modem) */ {0x39804f3f, NULL}, /* OZO8039 - Zoom 56k flex */ {0x00914f3f, NULL}, /* OZO9100 - Zoom 2919 (K56 Faxmodem) */ {0x3024a341, NULL}, /* PMC2430 - Pace 56 Voice Internal Modem */ {0x1000eb49, NULL}, /* ROK0010 - Rockwell ? */ {0x1200b23d, NULL}, /* RSS0012 - OMRON ME5614ISA */ {0x5002734a, NULL}, /* RSS0250 - 5614Jx3(G) Internal Modem */ {0x6202734a, NULL}, /* RSS0262 - 5614Jx3[G] V90+K56Flex Modem */ {0xc100ad4d, NULL}, /* SMM00C1 - Leopard 56k PnP */ {0x9012b04e, NULL}, /* SUP1290 - Supra ? */ {0x1013b04e, NULL}, /* SUP1310 - SupraExpress 336i PnP */ {0x8013b04e, NULL}, /* SUP1380 - SupraExpress 288i PnP Voice */ {0x8113b04e, NULL}, /* SUP1381 - SupraExpress 336i PnP Voice */ {0x5016b04e, NULL}, /* SUP1650 - Supra 336i Sp Intl */ {0x7016b04e, NULL}, /* SUP1670 - Supra 336i V+ Intl */ {0x7420b04e, NULL}, /* SUP2070 - Supra ? */ {0x8020b04e, NULL}, /* SUP2080 - Supra ? */ {0x8420b04e, NULL}, /* SUP2084 - SupraExpress 56i PnP */ {0x7121b04e, NULL}, /* SUP2171 - SupraExpress 56i Sp? */ {0x8024b04e, NULL}, /* SUP2480 - Supra ? */ {0x01007256, NULL}, /* USR0001 - U.S. Robotics Inc., Sportster W */ {0x02007256, NULL}, /* USR0002 - U.S. Robotics Inc. Sportster 33. */ {0x04007256, NULL}, /* USR0004 - USR Sportster 14.4k */ {0x06007256, NULL}, /* USR0006 - USR Sportster 33.6k */ {0x11007256, NULL}, /* USR0011 - USR ? */ {0x01017256, NULL}, /* USR0101 - USR ? */ {0x30207256, NULL}, /* USR2030 - U.S.Robotics Inc. Sportster 560 */ {0x50207256, NULL}, /* USR2050 - U.S.Robotics Inc. Sportster 33. */ {0x70207256, NULL}, /* USR2070 - U.S.Robotics Inc. Sportster 560 */ {0x30307256, NULL}, /* USR3030 - U.S. Robotics 56K FAX INT */ {0x31307256, NULL}, /* USR3031 - U.S. Robotics 56K FAX INT */ {0x50307256, NULL}, /* USR3050 - U.S. Robotics 56K FAX INT */ {0x70307256, NULL}, /* USR3070 - U.S. Robotics 56K Voice INT */ {0x90307256, NULL}, /* USR3090 - USR ? */ {0x70917256, NULL}, /* USR9170 - U.S. Robotics 56K FAX INT */ {0x90917256, NULL}, /* USR9190 - USR 56k Voice INT */ {0x0300695c, NULL}, /* WCI0003 - Fax/Voice/Modem/Speakphone/Asvd */ {0x01a0896a, NULL}, /* ZTIA001 - Zoom Internal V90 Faxmodem */ {0x61f7896a, NULL}, /* ZTIF761 - Zoom ComStar 33.6 */ {0} }; Snip I added sio2 and 3 with out disable to my kernel conf and compiled kernel this is what I found in my boot log with boot -v for verbose boot messages found-> vendor=0x11c1, dev=0x0480, revid=0x00 class=07-03-03, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base e3001000, size 8 map[14]: type 1, range 32, base 0000dc00, size 8 map[18]: type 1, range 32, base 0000e000, size 8 map[1c]: type 1, range 32, base 0000e400, size 3 pci0: (vendor=0x11c1, dev=0x0480) at 18.0 irq 9 This is my zoom 56K pci plus modem that has onboard controller and dsp sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: irq maps: 0x41 0x41 0x41 0x41 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0 sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: irq maps: 0x41 0x41 0x41 0x41 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0 You can see that my modem vendor/dev codes match the ActionTec modem all ready defined. pci0: (vendor=0x11c1, dev=0x0480) at 18.0 irq 9 This is my zoom 56K pci plus modem that has onboard controller and dsp static struct pci_ids pci_ids[] = { { 0x048011c1, "ActionTec 56k FAX PCI Modem", 0x14 }, I am at a loss of what to do next. For sure need info on what the function is of these two tables in sio.c along with The meaning of the fields in the tables and where or how to get that info so I can Edit the table entry for my modem. Thanks Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 12:22:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kabel203069.kabel.utwente.nl (kabel203069.kabel.utwente.nl [130.89.203.69]) by hub.freebsd.org (Postfix) with ESMTP id 33DB737B41C for ; Wed, 26 Dec 2001 12:22:36 -0800 (PST) Received: by kabel203069.kabel.utwente.nl (Postfix, from userid 1000) id A0D461F91; Wed, 26 Dec 2001 21:22:33 +0100 (CET) Date: Wed, 26 Dec 2001 21:22:33 +0100 From: Rogier Steehouder To: Fuji Zhang Cc: freebsd-questions@freebsd.org Subject: Re: defragment disk Message-ID: <20011226212233.A459@localhost> Mail-Followup-To: Rogier Steehouder , Fuji Zhang , freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from fzhang3@csd.uwo.ca on Wed, Dec 26, 2001 at 09:36:05AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 26-12-2001 09:36 (-0500), Fuji Zhang wrote: > seasons greetings! does anybody know what the utility for defragment the > hard disk is? Happy hollidays as well. defrag.exe And if it won't run, you don't need it :-) With kind regards, Rogier Steehouder -- ___ _ -O_\ // | / Rogier Steehouder //\ / \ r.j.s@gmx.net // \ <---------------------- 25m ----------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 12:59:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from postfix.ultradns.net (postfix.ultradns.net [204.74.100.40]) by hub.freebsd.org (Postfix) with ESMTP id 89C3837B41A for ; Wed, 26 Dec 2001 12:59:29 -0800 (PST) Received: from localhost (localhost.ultradns.net [127.0.0.1]) by postfix.ultradns.net (Postfix) with ESMTP id A756622FE0 for ; Wed, 26 Dec 2001 12:59:31 -0800 (PST) Received: from ultra-exchange.UltraDNS.com (nat-external.ultradns.net [204.74.100.10]) by postfix.ultradns.net (Postfix) with ESMTP id 2202B22F91 for ; Wed, 26 Dec 2001 12:59:29 -0800 (PST) content-class: urn:content-classes:message Subject: cvsup behavior puzzled Date: Wed, 26 Dec 2001 12:59:26 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-ID: <3DBB075EEB95944492E127F2B9A96FAF0CE091@ultra-exchange.UltraDNS.com> X-MS-Has-Attach: X-MimeOLE: Produced By Microsoft Exchange V6.0.4712.0 X-MS-TNEF-Correlator: Thread-Topic: sio.c & internial modems Thread-Index: AcGOR72M7Ieg+HJbTFuZ63Lni0siLQAB99yg From: "Patrick Soltani" To: "FBSD Questions" X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I did cvsup of my 4.4 stable and after the syncing the source tree, ran my script to buildworld, kernel, install, and mergmaster which worked fine, however, the uname -a says I have 4.5 PreRelase!! confirmed this on the 2nd machine; is it the defined behavior or am I missing something. I would like to stay on 4.4 stable as before. any info appreciated. Regards, Patrick Soltani. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:10:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 6307A37B417 for ; Wed, 26 Dec 2001 13:10:18 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 06CE57E27 for ; Wed, 26 Dec 2001 22:10:17 +0100 (MET) Date: Wed, 26 Dec 2001 22:10:13 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Console video mode -- where did 132x43 go? Message-Id: <20011226221014.63ad738f.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I used to run 132x34 as console text resolution, though it appeared slightly bended. That was before I switched from the Cirrus Logic GD5430 SVGA controller that came built-in with this Pentium 120. I recently switched to an ATI Mach64-GU graphics accelerator, which is newer and better equipped, yet it only seems to handle 80x40 -- at least according to Now I'm stuck, 132x34 is really a beautiful mode, and 80x40 is hella ugly. Is anyone out there able to help me? Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:16:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clink.schulte.org (clink.schulte.org [209.134.156.193]) by hub.freebsd.org (Postfix) with ESMTP id E756437B417 for ; Wed, 26 Dec 2001 13:16:48 -0800 (PST) Received: from schulte-laptop.nospam.schulte.org (nb-65.netbriefings.com [209.134.134.65]) by clink.schulte.org (Postfix) with ESMTP id B57302440D; Wed, 26 Dec 2001 15:16:47 -0600 (CST) Message-Id: <5.1.0.14.0.20011226151220.042b6ac0@pop3s.schulte.org> X-Sender: (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 26 Dec 2001 15:16:11 -0600 To: "Patrick Soltani" , "FBSD Questions" From: Christopher Schulte Subject: Re: cvsup behavior puzzled In-Reply-To: <3DBB075EEB95944492E127F2B9A96FAF0CE091@ultra-exchange.Ultr aDNS.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/book.html#RELEASE-CANDIDATE You're probably tracking RELENG_4 which has gone to code freeze and is about to become 4.5-RELEASE and 4.5-STABLE. At 12:59 PM 12/26/2001 -0800, Patrick Soltani wrote: >Hi, >I did cvsup of my 4.4 stable and after the syncing the source tree, ran >my script to buildworld, kernel, install, and mergmaster which worked >fine, however, the uname -a says I have 4.5 PreRelase!! > >confirmed this on the 2nd machine; is it the defined behavior or am I >missing something. I would like to stay on 4.4 stable as before. > >any info appreciated. > >Regards, >Patrick Soltani. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:24:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 61B7937B419 for ; Wed, 26 Dec 2001 13:24:49 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Wed, 26 Dec 2001 16:26:59 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: ipf/IPFilter/ipnat vers ipfw/IPFW/nat Date: Wed, 26 Dec 2001 16:24:45 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I scanned the questions archives and sniped this info. I would like to know if the views stated are correct. Any other insight or background info would be great. Does the ipf port install as userland or kernel & how to force kernel? Is there a package install for ipf or ipnat? Where would I find the ipf and ipnat ports? Where can I find info on ipnat? What is the difference between nat and ipnat if both run in user land? Does IPFilter have a built in nat function? SNIPITS ABOUT ipf/IPFilter/ipnat ipf being the real time interactive control interface to Darren Reed's IPFilter package. ipf has to be compiled from ports. ipf runs as-is in userspace, and can be compiled into the kernel. ipf is available on OpenBSD, NetBSD, Linux as well as FreeBSD, so familiarity with it enables a bit of portability that ipfw doesn't give you. ipf has the ability to keep two rule sets loaded, and allows you to easily switch between them. This is especially useful when changing or interactively debugging rule sets on an active connection. IPFilter is a fire walling package from Darren Reed. it runs entirely in the kernel. It comes distributed with the FreeBSD kernel source code in /sys/contrib/ipfilter/netinet/. One of the real advantages of IPFilter is that it does everything in kernel space, including NAT, so it's faster. The IPFilter rule set syntax is different than IPFW. IPFilter rules are last rule to match gets control, where IPFW it's the first rule to match gets control. IPFILTER is part of the GENERIC kernel, so no rebuild is required. You just have to enable it in the rc.conf file. I just switched from ipfw to ipfilter, and I found ipfilter easier to set up. Using the ipfilter/ipnat combination I was able to implement filters I never managed to get working under ipfw..... I use ipfilter/ipnat and like the way you can flush/edit the kernel filter list and the possibility to create nice config files for it. As I see it ipfilter is better handling large configurations. It also uses a technique which processes the whole rule set which might be a bit confusing when you first start using it. I used ipfw & natd for a while but since these copy packets from kernel to userland, and ipfilter/ipnat don't, ipfilter gives _way_ more performance on a busy network. For home use I shouldn't care if I where you; if ipfw suits you and does 'your thing' use it. :) SNIPITS ABOUT ipfw/IPFW/NAT Is it true about capital letters and lower case letters for ipfw meaning two different functions? Is it true that IPFW runs in kernel land and all traffic has to be handled twice If NAT is used? Where does one find the open and standard ipfw rules file? Are there any sample rules files with comments to copy from? IPFW is the FreeBSD *native* firewall. IPFW is part of the core FreeBSD OS. IPFW are capital letters and references the native functions of FBSD. ipfw lower case letters reference the interface to the IPFW FBSD native firewall. No fire walling is going to run very efficiently in "user space", passing packets out of the kernel for processing which is what natd does, under ipfw. Keep in mind though that it will only filter IP packets. All others will be passed unless you hack around that in the kernel. The man pages are wrong on this point. How can I get ipfw log file with writing size of the transmitted packets? Is it possible at all? Not with ipfw(8) logging as it exists in the base system. the ipfw -f flush and other rules you list are only run if your rc.firewall is run before you firewall.conf (or ipfw.rules). for instance, in rc.conf: firewall_enable="YES" firewall_script="/etc/rc.firewall" firewall_type="/etc/firewall.conf" if you skip the call to rc.firewall, then you'll want to add the explicit calls into ipfw.rules or firewall.conf. I had natd running for a while but that caused a 100% cpu load when there was much traffic, now with ipnat it never gets higher then 20% To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:25: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from eugate03.e-mail.com (eugate03.e-mail.com [194.196.143.91]) by hub.freebsd.org (Postfix) with ESMTP id 961AA37B417 for ; Wed, 26 Dec 2001 13:24:43 -0800 (PST) X-igwMailID: fBQL77v77214. Received: Received: by eugate.e-mail.com with ESMTP id fBQL77v77214 ; Wed, 26 Dec 2001 21:07:07 GMT Received: from not.com ([205.138.126.198]) by pilz.co.uk (Lotus Domino Release 5.0.9) with ESMTP id 2001122316525969:6390 ; Sun, 23 Dec 2001 16:52:59 +0000 Message-ID: <000028d83117$000005b0$000062be@not.com> To: From: ThaSaver@yaho.com Subject: Best Cig Prices on the WWW... OIK Date: Sun, 23 Dec 2001 10:48:13 -2000 MIME-Version: 1.0 X-MIMETrack: Itemize by SMTP Server on GBMF01/Pilz GmbH/DE(Release 5.0.9 |November 16, 2001) at 23/12/2001 16:53:03, Serialize by Router on Notes2/Pilz GmbH/DE(Release 5.07a |May 14, 2001) at 26.12.2001 22:05:15, Serialize complete at 26.12.2001 22:05:15 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG

 

ALERT for all SMOKERS

January 2002 Cigarette Taxes are 
RISING

*** A-G-A-I-N ***

You do not HAVE to participate...

We'll show you how to get Premium Cartons
(Only Top Selling US Brands)
Very few 100's SORRY
No service to EEC Countries!!!

Delivered in your mail

for as little as $13.50 Shipping/Handling 

I*N*C*L*U*D*E*D

Cli= ck here for the Details...

 

 

 

 

 

 

 

 

 

 

 

 

W= e strongly oppose the use of SPAM email and do not want anyone who does not wish to r= eceive 
our mailings to receive them. Please click here to be deleted from fu= rther communication.

Please = Remove Me

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:34: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 4311B37B405 for ; Wed, 26 Dec 2001 13:33:58 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 425147F59 for ; Wed, 26 Dec 2001 22:33:57 +0100 (MET) Date: Wed, 26 Dec 2001 22:33:53 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Passive FTP/DCC behind NAT -- What ports do they go through? Message-Id: <20011226223353.7908b2ed.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello again, Anyone here with an ADSL provider staticly connecting you through their NAT? Anyone here with an Cisco 677i-DIR ADSL-router, which requires a port redirection entry through telnet each time you want to open a new port? I've heard opening them all can be destructive to your ugly black dildo-shaped routten, in fact I tried it once, though I ain't no more. All ordinary daemons; SSHD, FTPD, BIND, Apache etc. works great; ftpd/sshd: set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp www: set nat entry add 10.0.0.2 80 0.0.0.0 80 tcp bind: set nat entry add 10.0.0.2 53 0.0.0.0 53 tcp identd: set nat entry add 10.0.0.2 113 0.0.0.0 113 tcp I'm a bit uncertain, however, when it comes to opening a port or range of ports to get passive FTP mode working on my virtual ProFTPD server (port 2001), as well as DCC in Irssi. I've heard those services go through the IANA-registered ephemeral port-range (49152-65535); sysctl net.inet.ip.portrange.hifirst /net.inet.ip.portrange.hilast So I went ahead opening those ports as well. Just about to close them though. Passive and DCC is not working. Incoming DCC file transfers are, according to Irssi, coming from ports way lower -- i.e. 4384. What do I open and what do I not? Thanks. Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:46:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 0642237B405 for ; Wed, 26 Dec 2001 13:46:17 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 8E1267ED4 for ; Wed, 26 Dec 2001 22:46:15 +0100 (MET) Date: Wed, 26 Dec 2001 22:46:13 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Trusted sources listing favoring software for different operations? Message-Id: <20011226224613.4fffcc50.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does such a thing exist? I want to know what's available without having to digg through obsolete equivalents before finally ending up with it. Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:52:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 762CF37B417 for ; Wed, 26 Dec 2001 13:52:52 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 845017F74 for ; Wed, 26 Dec 2001 22:52:51 +0100 (MET) Date: Wed, 26 Dec 2001 22:52:49 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Teaching parents UNIX Message-Id: <20011226225249.2f731ce6.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hai hai! My mother and sister hardly knows how to navigate through Windows :-) What is the best way of flash-teaching them how the most basic of basic things are done FreeBSD? I'm not fit for hours explaining. And this is the only system I have available to her. I havn't really found anything she might comprehend on freebsd.org, nor on any of its links. If I'm missing something here, please enlighten me =) Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:55:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id 7C71937B405 for ; Wed, 26 Dec 2001 13:55:07 -0800 (PST) Received: (qmail 11516 invoked from network); 26 Dec 2001 21:55:00 -0000 Received: from dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.136.150) by smtp3.mx.pitdc1.stargate.net with SMTP; 26 Dec 2001 21:55:00 -0000 Received: (qmail 2120 invoked from network); 26 Dec 2001 21:55:21 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 26 Dec 2001 21:55:21 -0000 From: "Doug Reynolds" To: "freebsd-questions@FreeBSD.org" , "Robin Hall" Date: Wed, 26 Dec 2001 16:56:20 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011226113621.44230.qmail@web20502.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: RE: device not configured Message-Id: <20011226215507.7C71937B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001 03:36:21 -0800 (PST), Robin Hall wrote: >I have an internal AOpen modem. This is a hardware >modem. I have the jumpers set to com 3 in windows >which is ttyS0 in linux and should be cuaa2 in >freeBSD. Why isn't this showing up on the correct >port? if your modem is hardware com3, irq 4, you have to recompile the kernel, but GENERIC is either disabled, or it's set to IRQ5. --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:55:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from imo-r09.mx.aol.com (imo-r09.mx.aol.com [152.163.225.105]) by hub.freebsd.org (Postfix) with ESMTP id 4031E37B405 for ; Wed, 26 Dec 2001 13:55:13 -0800 (PST) Received: from bbadgger@aol.com by imo-r09.mx.aol.com (mail_out_v31_r1.9.) id n.8.1eb8da6e (17229) for ; Wed, 26 Dec 2001 16:55:07 -0500 (EST) From: bbadgger@aol.com Message-ID: <8.1eb8da6e.295ba13b@aol.com> Date: Wed, 26 Dec 2001 16:55:07 EST Subject: windowsXP Product O.D.# Extraction Tool To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_8.1eb8da6e.295ba13b_boundary" X-Mailer: AOL 6.0 for Windows US sub 10524 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_8.1eb8da6e.295ba13b_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I was sent to This address to obtain an extration boot disk to retrive my windows XP Product I.D.# which was misplaced or lost. After reviewing your information I am doubtful that you can be of any resource to me and my cause, however I am an amature and really don't know if I am at the right place or not. The address I was given is as fok=\\llows "home.eunet.no/~tenordah2/ntpasswd/bootdisk.html" can you advise. Thank-you> --part1_8.1eb8da6e.295ba13b_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit I was sent to This address to obtain an extration boot disk to retrive my windows XP Product I.D.# which was misplaced or lost. After reviewing your information I am doubtful that you can be of any resource to me and my cause, however I am an amature and really don't know if I am at the right place or not. The address I was given is as fok=\\llows "home.eunet.no/~tenordah2/ntpasswd/bootdisk.html" can you advise. Thank-you> --part1_8.1eb8da6e.295ba13b_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:59: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id 92AC137B405 for ; Wed, 26 Dec 2001 13:58:57 -0800 (PST) Received: (qmail 19091 invoked from network); 26 Dec 2001 21:58:47 -0000 Received: from dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.136.150) by smtp3.mx.pitdc1.stargate.net with SMTP; 26 Dec 2001 21:58:47 -0000 Received: (qmail 2134 invoked from network); 26 Dec 2001 21:59:10 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 26 Dec 2001 21:59:10 -0000 From: "Doug Reynolds" To: "freebsd-questions@FreeBSD.ORG" , "Murphy, Derrick" Date: Wed, 26 Dec 2001 17:00:08 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: question about bsd Message-Id: <20011226215857.92AC137B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001 11:56:16 -0600, Murphy, Derrick wrote: >I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram and >a floppy drive. The hd is 200Mb What kind of unix could i install on >this? Im guessing it would have to be a pretty old version to work with so >little. If anyone knows of any free unix versions that would work with >this, please let me know ^_^ Thanks picobsd. you need like 12mbs of ram for freebsd --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 13:59:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 028CD37B417 for ; Wed, 26 Dec 2001 13:59:02 -0800 (PST) Received: from there (213-187-161-69.dd.nextgentel.com [213.187.161.69]) by mail.broadpark.no (Postfix) with SMTP id C8EEC7F74; Wed, 26 Dec 2001 22:59:00 +0100 (MET) Content-Type: text/plain; charset="iso-8859-15" From: Kjell To: barbish@a1poweruser.com Subject: Re: ipf/IPFilter/ipnat vers ipfw/IPFW/nat Date: Wed, 26 Dec 2001 21:58:02 +0100 X-Mailer: KMail [version 1.3.1] References: In-Reply-To: Cc: questions@FreeBSD.ORG MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011226215900.C8EEC7F74@mail.broadpark.no> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wednesday 26 December 2001 10:24 pm, you wrote: > I scanned the questions archives and sniped this info. > I would like to know if the views stated are correct. > Any other insight or background info would be great. > > Does the ipf port install as userland or kernel & how to force kernel? > Is there a package install for ipf or ipnat? > Where would I find the ipf and ipnat ports? > Where can I find info on ipnat? > What is the difference between nat and ipnat if both run in user land? > Does IPFilter have a built in nat function? > > > SNIPITS ABOUT ipf/IPFilter/ipnat > > ipf being the real time interactive control interface to Darren Reed's > IPFilter package. > ipf has to be compiled from ports. ipf runs as-is in userspace, and can be > compiled into the kernel. ipf is available on OpenBSD, NetBSD, Linux as > well as FreeBSD, so familiarity with it enables a bit of portability that > ipfw doesn't give you. ipf has the ability to keep two rule sets loaded, > and allows you to easily switch between them. This is especially useful > when changing or interactively debugging rule sets on an active connection. > > IPFilter is a fire walling package from Darren Reed. it runs entirely in > the kernel. It comes distributed with the FreeBSD kernel source code in > /sys/contrib/ipfilter/netinet/. One of the real advantages of IPFilter is > that it does everything in kernel space, including NAT, so it's faster. The > IPFilter rule set syntax is different than IPFW. IPFilter rules are last > rule to match gets control, where IPFW it's the first rule to match gets > control. > > > IPFILTER is part of the GENERIC kernel, so no rebuild is required. You just > have to enable it in the rc.conf file. I just switched from ipfw to > ipfilter, > and I found ipfilter easier to set up. Using the ipfilter/ipnat combination > I > was able to implement filters I never managed to get working under > ipfw..... I am responsible for the above quote. It is not strictly correct. My current understanding is that by inserting the proper statement in rc.conf Ipfilter will be loaded as a loadable module. This is good for experimentation, but the recomended way is to compile Ipfilter as part of your kernel.... > > I use ipfilter/ipnat and like the way you can flush/edit the kernel filter > list > and the possibility to create nice config files for it. As I see it > ipfilter is > better handling large configurations. It also uses a technique which > processes the whole rule set which might be a bit confusing when you first > start using it. > I used ipfw & natd for a while but since these copy packets from kernel to > userland, and ipfilter/ipnat don't, ipfilter gives _way_ more performance > on a busy network. > > For home use I shouldn't care if I where you; if ipfw suits you and does > 'your > thing' use it. :) > > > > SNIPITS ABOUT ipfw/IPFW/NAT > > Is it true about capital letters and lower case letters for > ipfw meaning two different functions? > Is it true that IPFW runs in kernel land and all traffic has to be handled > twice > If NAT is used? > Where does one find the open and standard ipfw rules file? > Are there any sample rules files with comments to copy from? > > > > > IPFW is the FreeBSD *native* firewall. IPFW is part of the core FreeBSD OS. > IPFW are capital letters and references the native functions of FBSD. > ipfw lower case letters reference the interface to the IPFW FBSD native > firewall. No fire walling is going to run very efficiently in "user > space", passing packets out of the kernel for processing which is what natd > does, under ipfw. Keep in mind though that it will only filter IP packets. > All others will be passed unless you hack around that in > the kernel. The man pages are wrong on this point. > > How can I get ipfw log file with writing size of the transmitted packets? > Is it possible at all? Not with ipfw(8) logging as it exists in the base > system. > > the ipfw -f flush and other rules you list are only run if your rc.firewall > is run before you firewall.conf (or ipfw.rules). for instance, in rc.conf: > > firewall_enable="YES" > firewall_script="/etc/rc.firewall" > firewall_type="/etc/firewall.conf" > > if you skip the call to rc.firewall, then you'll want to add the explicit > calls into ipfw.rules or firewall.conf. > > > I had natd running for a while but that caused a 100% cpu load when there > was much traffic, now with ipnat it never gets higher then 20% > Quite a collection of contradictions. My conclusion would be that you should not use this list to gain a basic understanding of how things function. But it is fine to get the answer to a specific question. To learn about firewalling, read a book like O'Reilly's Firewalls. To implement a firewall, read one of the fine articles on onlamp.org If you have specific questions during your implementation, ask the questions here. GL from Kjell/LA3SG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14: 1:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id 74DA837B42B for ; Wed, 26 Dec 2001 14:00:31 -0800 (PST) Received: (qmail 22882 invoked from network); 26 Dec 2001 22:00:25 -0000 Received: from dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.136.150) by smtp3.mx.pitdc1.stargate.net with SMTP; 26 Dec 2001 22:00:25 -0000 Received: (qmail 2153 invoked from network); 26 Dec 2001 22:00:48 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-136-150.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 26 Dec 2001 22:00:48 -0000 From: "Doug Reynolds" To: "freebsd-questions@freebsd.org" , "jacks@sage-american.com" Date: Wed, 26 Dec 2001 17:01:46 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <3.0.5.32.20011226115827.01691728@mail.sage-american.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: FTPD start/restart Message-Id: <20011226220031.74DA837B42B@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001 11:58:27 -0600, jacks@sage-american.com wrote: >Guess. I'm having a senior moment, but I would like to stop the ftpd >service (normally launched from inetd) and then restart with new parameters >like: >#/usr/libexec/ftpd -lS > >Would I stop with >#kill HUP ftpd #then run the above to restart? > >I know, pretty basic....but...still unsure.... if its running though inetd, you want to change the inetd.conf file and kill -HUP inetd.. if you are running it in stand alone mode, you want to just kill ftpd and restart it --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14: 5:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id 6DBD237B4EC for ; Wed, 26 Dec 2001 14:05:29 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP id XAA16865 (8.8.8/1.13); Wed, 26 Dec 2001 23:05:26 +0100 (MET) Message-Id: <200112262205.XAA16865@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: Johann Sharizan Subject: Re: Teaching parents UNIX Date: Wed, 26 Dec 2001 23:10:22 +0000 X-Mailer: KMail [version 1.3.2] References: <20011226225249.2f731ce6.johann@broadpark.no> In-Reply-To: <20011226225249.2f731ce6.johann@broadpark.no> Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG To me it sounds like you should hide FreeBSD complexities as much as possible. Maybe make a password less account and install something like KDE. It should even be possible to boot directly into a graphical login. Basically don't explain them FreeBSD, explain them how to use a graphical userinterface. Simon Siemonsma On Wednesday 26 December 2001 21:52, you wrote: > Hai hai! > > My mother and sister hardly knows how to navigate through Windows :-) > > What is the best way of flash-teaching them how the most basic of basic > things are done FreeBSD? I'm not fit for hours explaining. And this is the > only system I have available to her. > > I havn't really found anything she might comprehend on freebsd.org, nor on > any of its links. If I'm missing something here, please enlighten me =) > > Regards, > Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14:22:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc24.worldnet.att.net (mtiwmhc24.worldnet.att.net [204.127.131.49]) by hub.freebsd.org (Postfix) with ESMTP id 16E2B37B416 for ; Wed, 26 Dec 2001 14:22:43 -0800 (PST) Received: from columbia ([12.93.215.57]) by mtiwmhc24.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011226222241.YZDC13117.mtiwmhc24.worldnet.att.net@columbia>; Wed, 26 Dec 2001 22:22:41 +0000 From: "Andrew C. Hornback" To: "Murphy, Derrick" , Subject: RE: question about bsd Date: Wed, 26 Dec 2001 17:20:14 -0500 Message-ID: <006901c18e5b$7d8ac8a0$6600000a@ach.domain> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Murphy, Derrick > Sent: Wednesday, December 26, 2001 12:56 PM > To: 'freebsd-questions@FreeBSD.ORG' > Subject: question about bsd > > I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB > of ram and > a floppy drive. The hd is 200Mb What kind of unix could i install on > this? Im guessing it would have to be a pretty old version to > work with so > little. If anyone knows of any free unix versions that would work with > this, please let me know ^_^ Thanks Others have already given good recommendations (NetBSD, PicoBSD), but I've got one that might work as well, Minix. It's minimum requirements are on the order of an 8088 with 256k of ram and a single floppy drive, and you far and away exceed those requirements with your system. FreeBSD would probably work on your system if you upgraded the amount of memory to 12 MB. --- Andy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14:29:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc25.worldnet.att.net (mtiwmhc25.worldnet.att.net [204.127.131.50]) by hub.freebsd.org (Postfix) with ESMTP id 8663637B416 for ; Wed, 26 Dec 2001 14:29:23 -0800 (PST) Received: from columbia ([12.93.215.57]) by mtiwmhc25.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011226222922.ZRGG15547.mtiwmhc25.worldnet.att.net@columbia>; Wed, 26 Dec 2001 22:29:22 +0000 From: "Andrew C. Hornback" To: , Subject: RE: windowsXP Product O.D.# Extraction Tool Date: Wed, 26 Dec 2001 17:26:54 -0500 Message-ID: <006a01c18e5c$6bf8fde0$6600000a@ach.domain> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal In-Reply-To: <8.1eb8da6e.295ba13b@aol.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hmm, yes... Windows XP Product ID number... *looks through some files busily* Wait a minute, this is a FreeBSD list. Since Windows XP is a Microsoft product, perhaps you should contact Microsoft for support? That makes sense to me in my twisted little mind... --- Andy Q: What's the best application for Windows? A: A sledgehammer. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of bbadgger@aol.com Sent: Wednesday, December 26, 2001 4:55 PM To: freebsd-questions@freebsd.org Subject: windowsXP Product O.D.# Extraction Tool I was sent to This address to obtain an extration boot disk to retrive my windows XP Product I.D.# which was misplaced or lost. After reviewing your information I am doubtful that you can be of any resource to me and my cause, however I am an amature and really don't know if I am at the right place or not. The address I was given is as fok=\\llows "home.eunet.no/~tenordah2/ntpasswd/bootdisk.html" can you advise. Thank-you> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14:45:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from priv-edtnes15-hme0.telusplanet.net (defout.telus.net [199.185.220.240]) by hub.freebsd.org (Postfix) with ESMTP id 34E4C37B419 for ; Wed, 26 Dec 2001 14:45:10 -0800 (PST) Received: from michael ([66.183.86.93]) by priv-edtnes15-hme0.telusplanet.net (InterMail vM.5.01.04.01 201-253-122-122-101-20011014) with SMTP id <20011226224509.ICCE14335.priv-edtnes15-hme0.telusplanet.net@michael> for ; Wed, 26 Dec 2001 15:45:09 -0700 Message-ID: <000801c18e5e$f60e8020$5d56b742@bc.hsia.telus.net> Reply-To: "Michael Kreykenbohm" From: "Michael Kreykenbohm" To: Subject: pre-built firewall kernel Date: Wed, 26 Dec 2001 14:45:04 -0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C18E1B.E7868AE0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C18E1B.E7868AE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Everythings looks great with the little system I setup, until I realized = that the kernel does not have the firewall flags compiled into it. Since I do not have the disk space for all the tools to compile etc, I = was wondering if one of the distributions was already compliled as a firewall, all I seem to need is a kernel itself with the generic = items. Appreciate any help. Thanks in advance. _______________________ Michael Kreykenbohm W. Kreykenbohm Corp 18788 96th Ave Surrey B.C. 604-888-4114 ------=_NextPart_000_0005_01C18E1B.E7868AE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Everythings looks great with the little = system I=20 setup, until I realized that the kernel does not have the firewall flags = compiled into it.
Since I do not have the disk space for = all the=20 tools to compile etc, I was wondering if one of the distributions was = already=20 compliled
as a firewall, all I seem to need is a = kernel=20 itself with the generic items.
 
Appreciate any help.
Thanks in advance.
_______________________
Michael=20 Kreykenbohm
W. Kreykenbohm Corp
18788 96th Ave Surrey=20 B.C.
604-888-4114
------=_NextPart_000_0005_01C18E1B.E7868AE0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14:48:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from anansi.vpha.health.ufl.edu (anansi.vpha.health.ufl.edu [159.178.78.153]) by hub.freebsd.org (Postfix) with ESMTP id 5B89337B41A for ; Wed, 26 Dec 2001 14:48:19 -0800 (PST) Received: (from dymphna@localhost) by anansi.vpha.health.ufl.edu (8.9.3/8.9.3) id RAA10525; Wed, 26 Dec 2001 17:48:13 -0500 Date: Wed, 26 Dec 2001 17:48:13 -0500 From: sridharv@ufl.edu Message-Id: <200112262248.RAA10525@anansi.vpha.health.ufl.edu> X-Authentication-Warning: anansi.vpha.health.ufl.edu: dymphna set sender to sridharv@ufl.edu using -f To: Johann Sharizan , freebsd-questions@FreeBSD.ORG Reply-To: sridharv@ufl.edu References: <20011226225249.2f731ce6.johann@broadpark.no> <200112262205.XAA16865@smtp.hccnet.nl> In-Reply-To: <200112262205.XAA16865@smtp.hccnet.nl> MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 8bit User-Agent: IMP/PHP3 Imap webMail Program 2.0.10 X-Originating-IP: 66.157.145.67 Subject: Re: Teaching parents UNIX Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i agree with him. but whatever method you apply, if you succeed I think it will be a milestone for unix in general :-). this can be touted as a new parameter for success of freenixes :-).. hope you enjoy the task Quoting Simon Siemonsma : > To me it sounds like you should hide FreeBSD complexities as much as > possible. > Maybe make a password less account and install something like KDE. > It should even be possible to boot directly into a graphical login. > Basically don't explain them FreeBSD, explain them how to use a graphical > userinterface. > > Simon Siemonsma > > > On Wednesday 26 December 2001 21:52, you wrote: > > Hai hai! > > > > My mother and sister hardly knows how to navigate through Windows :-) > > > > What is the best way of flash-teaching them how the most basic of basic > > things are done FreeBSD? I'm not fit for hours explaining. And this is > the > > only system I have available to her. > > > > I havn't really found anything she might comprehend on freebsd.org, nor > on > > any of its links. If I'm missing something here, please enlighten me =) > > > > Regards, > > Johann > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > The fastest way to change is to laugh at your own folly - Who moved my cheese To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 14:59:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from koza.acecape.com (koza2.acecape.com [66.9.36.222]) by hub.freebsd.org (Postfix) with ESMTP id 0CE0337B416 for ; Wed, 26 Dec 2001 14:59:37 -0800 (PST) Received: from p65-147.acedsl.com (p65-147.acedsl.com [66.114.65.147]) by koza.acecape.com (8.10.1/8.9.3) with ESMTP id fBQMxZ717105; Wed, 26 Dec 2001 17:59:35 -0500 (EST) Date: Wed, 26 Dec 2001 18:00:53 -0500 (EST) From: Francisco Reyes X-X-Sender: fran@zoraida.natserv.net To: xiyuan qian Cc: freebsd-questions@FreeBSD.ORG Subject: Re: how to install freebsd on Compaq proliant DL380 In-Reply-To: <20011211143155.51476.qmail@web10001.mail.yahoo.com> Message-ID: <20011226175950.R23587-100000@zoraida.natserv.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 11 Dec 2001, xiyuan qian wrote: > Hi, if you have the successful experience with > installing freebsd on Compaq proliant DL380 machine, > please tell me. What's the version? How to??? Catching up with the list. Did you get an answer? It seems that there is support for this machine in 4.4 Stable, but one has to do custom kernel and copy it to the floppy. Just got the info today. Planning on doing a custom kernel tonight and trying again install tomorrow. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 15:34:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bemarketing.jade-ventures.com (bemarketing.superb.net [209.61.216.41]) by hub.freebsd.org (Postfix) with ESMTP id B918337B416 for ; Wed, 26 Dec 2001 15:34:19 -0800 (PST) Received: (from adminbm@localhost) by bemarketing.jade-ventures.com (8.11.1/8.11.1) id fBQNgwY13450; Wed, 26 Dec 2001 18:42:58 -0500 Date: Wed, 26 Dec 2001 18:42:58 -0500 Message-Id: <200112262342.fBQNgwY13450@bemarketing.jade-ventures.com> X-Authentication-Warning: bemarketing.jade-ventures.com: adminbm set sender to mailing_lists@zemailing.com using -f Content-type: text/html To: questions@freebsd.org From: Italy Reply-To: Italy Subject: Take your share of the Internet wealth Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Zemailing English

Zemailing.com
DownloadsSupportPurchase

Having a presence on the Internet means nothing without promotion. Advertising means everything to be successful or even to survive. Imagine being able to produce total targeted mailing lists according to filters that you define.

With over 63+ million Internet users out there, e-mail marketing is the ideal way to promote your business.

Take your share of the Internet wealth with the most advanced E-mail tools ever.

Extracting "just any old" e-mail addresses is not enough for the majority of marketing.... That's where E-mail Spyder supersedes. E-mail Spyder provides the most advanced filtering capabilities ever designed, allowing for the most targeted extraction ever.

It is no longer necessary to purchase mailing lists. In fact most mailing lists have been resold tens of thousands of times, rendering them useless. E-mail Spyder allows you to extract your own targeted e-mail addresses from web pages, search engine results, mailbox folders, text files and more. Simply e-mail the addresses that you've extracted to reap the benefits of a successful e-mail marketing campaign. Nothing is more effective.

E-mail Spyder is a professional tool designed to extract targeted e-mail addresses from various resources providing you with fresh mailing lists to inform, notify or promote your business or product.

E-mail Spyder is your most valuable resource for providing the leads and customers you need at a fraction of typical advertising costs.

With the use of optional "Plugins" E-mail Spyder can extract e-mail addresses from various places deemed untouchable by other e-mail extraction software.

Click here to learn more about E-mail Spyder
Click here to learn more about E-mail Spyder Plugins

Newsgrouper allows the fastest e-mail address extraction available from selected newsgroups. Built-in List Editing menu allows for duplicate address removal, editing and removal of invalid e-mail addresses in bulk. Newsgrouper is a must for anyone who wishes to promote their site or services easily and efficiently.

Click here to learn more about Newsgrouper

Take the headaches out of organizing, removing duplicates, and sorting your mailing lists with ListEase. Professional Extractions need a professional mailing list manager .... introducing ListEase.

Click here to learn more about ListEase

Spyder Mailer is the first bulk mailer with reliability in mind. Speed is not prized as much as flexibility, allowing you to work with any ISP to do your mailing in an easy, cost effective manner. With the shadows surrounding the issues of spamming, Spyder Mailer lets you stay legal and reliable without the expense of a costly e-mail service. Let Spyder Mailer work for your business today.

Click here to learn more about Spyder Mailer
DownloadsSupportPurchase
This message was sent to you by Zemailing.com.
This is a one time mailing. If you are not interested, simply delete the email.
For a copy of our privacy policy, please see http://www.zemailing.com/privacy_policy.html

---------------------------------------------------------------------------
To be unsubscribed from the Italy mailing list, simply click on the link below:
Unsubscribe questions@freebsd.org


To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 15:53:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.panix.com (mail2.panix.com [166.84.0.213]) by hub.freebsd.org (Postfix) with ESMTP id A800337B419 for ; Wed, 26 Dec 2001 15:53:55 -0800 (PST) Received: from panix3.panix.com (panix3.panix.com [166.84.1.3]) by mail2.panix.com (Postfix) with ESMTP id 078DA8E87 for ; Wed, 26 Dec 2001 18:53:54 -0500 (EST) Received: (from cft@localhost) by panix3.panix.com (8.11.3nb1/8.8.8/PanixN1.0) id fBQNrsv14809 for freebsd-questions@freebsd.org; Wed, 26 Dec 2001 18:53:54 -0500 (EST) Date: Wed, 26 Dec 2001 18:53:54 -0500 From: Carl Tucker To: freebsd-questions@freebsd.org Subject: Re: Subject: Can't boot FreeBSD on a Sony VAIO qr10 Message-ID: <20011226185354.A14068@panix.com> References: <006301c18e03$4c9eb4c0$640aa8c0@terre> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <006301c18e03$4c9eb4c0$640aa8c0@terre> User-Agent: Mutt/1.3.23i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 12:48:56PM +0100, stepahne B wrote: > Hello, > > I got a VAIO qr10 on which I would like to install FreeBSD. The > machine comes without a floppy drive and I can only boot from the > CDROM. When booting the 4.4-install CD the machine hard locks just > after "ppc0: parallel port not found" My VAIO laptop did the same thing during probing. The problem turned out to be the pcmcia hanging. If I pressed and released the power button, the computer would shut off. Then I'd immediately turn it back on, and it would continue probing from where it left off. That way I could at least boot the system. To fix the real problem, I set the IRQ of my pcmcia controller properly. I can't remember the correct settings now, though - I'm on a different machine. -- Carl Tucker cft@panix.com flestrin@worldnet.att.net tuckercl@phnsy.navy.mil To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 16:30:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from portamoose.portamoose.com (bgrcvx034210.prexar.com [142.167.34.210]) by hub.freebsd.org (Postfix) with ESMTP id 5165837B417 for ; Wed, 26 Dec 2001 16:30:25 -0800 (PST) Received: from portamoose (localhost [127.0.0.1]) by portamoose.portamoose.com (8.10.2/8.10.2) with ESMTP id fBR0U7S00980; Wed, 26 Dec 2001 19:30:08 -0500 (EST) Date: Wed, 26 Dec 2001 19:30:05 -0500 Subject: Re: Teaching parents UNIX Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v480) Cc: Johann Sharizan , freebsd-questions@FreeBSD.ORG To: sridharv@ufl.edu From: "Kyle R. Green" In-Reply-To: <200112262248.RAA10525@anansi.vpha.health.ufl.edu> Message-Id: Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.480) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wednesday, December 26, 2001, at 05:48 PM, sridharv@ufl.edu wrote: > i agree with him. but whatever method you apply, if > you succeed I think it will be a milestone for unix in > general :-). You mean Mac OS X? :P -- Kyle R. Green kyle@kgreen.org "As long as a man safeguards his rights and duties, within himself, and with humanity, avoids transgressing other peoples' rights, greed, and harming others, and tries to be useful to others, only if they ask for his help, he becomes their brother. But, when any member of this family of mankind oppresses, exploits, unjustly wages wars on them, or lies and deceives others, he would be acting like a devil in the form of man." -- Saddam Hussein, President of Iraq, Oct. 18, 2001 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 16:44:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from andrsn.stanford.edu (andrsn.Stanford.EDU [171.66.112.163]) by hub.freebsd.org (Postfix) with ESMTP id 82EFE37B417 for ; Wed, 26 Dec 2001 16:44:38 -0800 (PST) Received: from localhost (andrsn@localhost.stanford.edu [127.0.0.1]) by andrsn.stanford.edu (8.9.3/8.9.1) with ESMTP id QAA62847; Wed, 26 Dec 2001 16:41:18 -0800 (PST) Date: Wed, 26 Dec 2001 16:41:18 -0800 (PST) From: Annelise Anderson To: Johann Sharizan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Teaching parents UNIX In-Reply-To: <20011226225249.2f731ce6.johann@broadpark.no> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001, Johann Sharizan wrote: > Hai hai! > > My mother and sister hardly knows how to navigate through Windows :-) > > What is the best way of flash-teaching them how the most basic of basic things > are done FreeBSD? I'm not fit for hours explaining. And this is the only system > I have available to her. > > I havn't really found anything she might comprehend on freebsd.org, nor on any of > its links. If I'm missing something here, please enlighten me =) > > Regards, > Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message I think you don't teach them unix--you set up a graphical interface so that the answer to every question is : click on the icon. You do want them to have usernames and reasonably unguessable passwords for Internet security. As they want to do more things (play music, use electronic mail, write documents) you install additional applications. Annelise -- Annelise Anderson Author of: FreeBSD: An Open-Source Operating System for Your PC Available from: BSDmall.com and amazon.com Book Website: http://www.bittreepress.com/FreeBSD/introbook/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 16:45:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 1301437B416 for ; Wed, 26 Dec 2001 16:45:01 -0800 (PST) Received: from Tom_Parquette [24.24.29.69] by myrealbox.com with NIMS ModWeb Module; Wed, 26 Dec 2001 19:44:55 -0500 Subject: Re: Teaching parents UNIX From: Tom Parquette To: johann@broadpark.no, Cc: freebsd-questions@freebsd.org, Date: Wed, 26 Dec 2001 19:44:55 -0500 X-Mailer: NIMS ModWeb Module X-Sender: Tom_Parquette MIME-Version: 1.0 Message-ID: <1009413895.49812ff2Tom_Parquette@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think we have a trend here... I agree with the suggestions from the other folks. I'd take the suggestions one step further. Install fvwm95. I had it runni= ng on a test system and it was close enough to window$ that I could work = with it without RTFM first. If security on your machine is not an issue, I'd accept the other suggestio= n and set up a passwordless account, and the scripting, to bring up fvwm9= 5 without them having to do anything. FWIW, When my wife first tried to learn to use a PC it was DOS and no GUI. = I don't know who was more frustrated, her or me!! But, she picked up th= e window$ "GUI" fairly quickly on her own. Cheers... BTW, I survived teaching my wife. Even if I do end up acting like a captiv= e Help Desk. ;-) -----Original Message----- From: Johann Sharizan To: freebsd-questions@freebsd.org Date: Wed, 26 Dec 2001 22:52:49 +0100 Subject: Teaching parents UNIX Hai hai! My mother and sister hardly knows how to navigate through Windows :-) What is the best way of flash-teaching them how the most basic of basic thi= ngs are done FreeBSD? I'm not fit for hours explaining. And this is the only sy= stem I have available to her. I havn't really found anything she might comprehend on freebsd.org, nor on = any of its links. If I'm missing something here, please enlighten me =3D) Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message Try not. Do or do not. There is no try. -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 17: 9:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from operamail.com (operamail.infinite.com [199.29.68.126]) by hub.freebsd.org (Postfix) with ESMTP id 6145B37B416 for ; Wed, 26 Dec 2001 17:09:45 -0800 (PST) X-WM-Posted-At: operamail.com; Wed, 26 Dec 01 20:09:02 -0500 X-WebMail-UserID: leegold Date: Wed, 26 Dec 2001 20:09:02 -0500 From: leegold To: freebsd-questions@freebsd.org X-EXP32-SerialNo: 00000000 Subject: Packages for Fbsd 5.0 not installing on Fbsd4.4 Message-ID: <3C2B7260@operamail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: InterChange (Hydra) SMTP v3.62 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have FreeBSd 4.4 installed. I have a disk fro %.0 (all this is from the book: "FreeBSd Unleashed". I tried installing Window managers from the 5.0 disk and they install but do not work. Does Sio5 (or SIO5) library ring a bell? I get a error message refering to this when I try to run a WM installed from the 5.0 disk. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 17:33:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.triad.rr.com (fe4.southeast.rr.com [24.93.67.51]) by hub.freebsd.org (Postfix) with ESMTP id 2C08837B417 for ; Wed, 26 Dec 2001 17:33:16 -0800 (PST) Received: from 2kprohome ([66.56.171.119]) by mail4.triad.rr.com with Microsoft SMTPSVC(5.5.1877.687.68); Wed, 26 Dec 2001 19:01:39 -0500 Message-ID: <012101c18e69$65776bc0$0202a8c0@2kprohome> From: "Joe Joplin" To: Subject: unable to start nmbd and smbd after moving subnets Date: Wed, 26 Dec 2001 18:59:46 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_011E_01C18E3F.7C768330" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_011E_01C18E3F.7C768330 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To All: I had set up a new installation of FreeBSD 4.4 and installed the Samba = 2.0.10 port. I created a simple smb.conf for file sharing, and = everything was fine. I was using inetd to start the two services = (uncommented the default lines for samba). When I moved the server onto = the actual network, I changed the IP address in rc.conf from the test = network, 192.168.2, to the actual network 192.168.3. I also made the = hosts allow change in smb.conf. Now I can't seem to get the smbd start = at all and nmbd starts sporadically. Is there another place I needed to = make an IP change? If you need any files let me know. I hope everyone had a happy holiday. Joe ------=_NextPart_000_011E_01C18E3F.7C768330 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
To All:
I had set up a new installation of = FreeBSD 4.4 and=20 installed the Samba 2.0.10 port.  I created a simple smb.conf for = file=20 sharing, and everything was fine.  I was using inetd to start the = two=20 services (uncommented the default lines for samba).  When I moved = the=20 server onto the actual network, I changed the IP address in rc.conf = from=20 the test network, 192.168.2, to the actual network 192.168.3.  = I also=20 made the hosts allow change in smb.conf.  Now I can't seem to get = the smbd=20 start at all and nmbd starts sporadically.  Is there another place = I needed=20 to make an IP change?  If you need any files let me = know.
 
I hope everyone had a happy = holiday.
 
Joe
------=_NextPart_000_011E_01C18E3F.7C768330-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 17:54:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web9204.mail.yahoo.com (web9204.mail.yahoo.com [216.136.129.27]) by hub.freebsd.org (Postfix) with SMTP id 55E6537B405 for ; Wed, 26 Dec 2001 17:54:21 -0800 (PST) Message-ID: <20011227015421.64132.qmail@web9204.mail.yahoo.com> Received: from [64.26.97.83] by web9204.mail.yahoo.com via HTTP; Wed, 26 Dec 2001 17:54:21 PST Date: Wed, 26 Dec 2001 17:54:21 -0800 (PST) From: Thomas D'Amico Subject: How do I acquire your entire freebsd downloads? To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I wish to download off the internet all your free software, drivers, etc. I'll be happy to contribute to your great program. Please advise and guide me, I don't see any free downloads on your site, only retailers selling them (CD's)! Please Help. Thanks, Tom. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 18:20:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id B564537B419 for ; Wed, 26 Dec 2001 18:20:26 -0800 (PST) Received: from twincat.vladsempire.net (hutch-324.hutchtel.net [206.10.68.24]) by services.webwarrior.net (Postfix) with ESMTP id A1C114C8 for ; Wed, 26 Dec 2001 20:19:58 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 7F2213872; Wed, 26 Dec 2001 16:03:38 +0000 (GMT) Date: Wed, 26 Dec 2001 16:03:38 +0000 From: Josh Paetzel To: Johann Sharizan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Passive FTP/DCC behind NAT -- What ports do they go through? Message-ID: <20011226160338.A252@twincat.vladsempire.net> Mail-Followup-To: Johann Sharizan , freebsd-questions@FreeBSD.ORG References: <20011226223353.7908b2ed.johann@broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011226223353.7908b2ed.johann@broadpark.no>; from johann@broadpark.no on Wed, Dec 26, 2001 at 10:33:53PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 10:33:53PM +0100, Johann Sharizan wrote: > Hello again, > > Anyone here with an ADSL provider staticly connecting you through their NAT? > Anyone here with an Cisco 677i-DIR ADSL-router, which requires a port redirection > entry through telnet each time you want to open a new port? I've heard opening > them all can be destructive to your ugly black dildo-shaped routten, in fact I > tried it once, though I ain't no more. > > All ordinary daemons; SSHD, FTPD, BIND, Apache etc. works great; > > ftpd/sshd: set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp > www: set nat entry add 10.0.0.2 80 0.0.0.0 80 tcp > bind: set nat entry add 10.0.0.2 53 0.0.0.0 53 tcp > identd: set nat entry add 10.0.0.2 113 0.0.0.0 113 tcp > > I'm a bit uncertain, however, when it comes to opening a port or range of ports > to get passive FTP mode working on my virtual ProFTPD server (port 2001), as well > as DCC in Irssi. I've heard those services go through the IANA-registered > ephemeral port-range (49152-65535); > > sysctl net.inet.ip.portrange.hifirst > /net.inet.ip.portrange.hilast > > So I went ahead opening those ports as well. Just about to close them > though. Passive and DCC is not working. Incoming DCC file transfers are, > according to Irssi, coming from ports way lower -- i.e. 4384. > > What do I open and what do I not? > > Thanks. > > Regards, > Johann In your situation I usually use the -punch_fw option to natd. Essentially what that does is watch the packets for the incoming port number, then inserts a dynamic rule into your ruleset to open the port. man natd for details. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 18:45:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout06.sul.t-online.com (mailout06.sul.t-online.com [194.25.134.19]) by hub.freebsd.org (Postfix) with ESMTP id 39DA837B405 for ; Wed, 26 Dec 2001 18:45:19 -0800 (PST) Received: from fwd10.sul.t-online.de by mailout06.sul.t-online.de with smtp id 16JQXm-0007dn-01; Thu, 27 Dec 2001 03:45:18 +0100 Received: from T-Online.DE (520042712742-0001@[80.133.148.233]) by fwd10.sul.t-online.com with esmtp id 16JQXd-1AwdNYC; Thu, 27 Dec 2001 03:45:09 +0100 Message-ID: <3C2A8B9B.D509315C@T-Online.DE> Date: Thu, 27 Dec 2001 03:46:51 +0100 From: morten.gulbrandsen@t-online.de (Morten Gulbrandsen) X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: startx crashes FreeBSD 4.2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Sender: 520042712742-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, my problem is: startx gives fatal server error. ======================================================================= su-2.04# make install ===> 9term ===> XFree86 ===> XFree86-4 ===> XFree86-4-clients ===> XFree86-4-documents ===> XFree86-4-libraries ===> XFree86-4-manuals ===> Building for XFree86-manuals-4.0.1 making all in ./general... making all in ./X11... making all in ./Xt... making all in ./Xext... making all in Xext/dbe... making all in ./Xi... making all in ./Xau... making all in ./Xv... making all in ./GL... making all in GL/glx... rm -f glXChooseVisual.3.html glXChooseVisual.3-html rman -f HTML < glXChooseVisual.man > glXChooseVisual.3-html && mv -f glXChooseVisual.3-html glXChooseVisual.3.html macro "!" not recognized -- ignoring macro "macro" not recognized -- ignoring Segmentation fault - core dumped *** Error code 139 Stop in /usr/ports/x11/XFree86-4-manuals/work/xc/doc/man/GL/glx. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals/work/xc/doc/man/GL. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals/work/xc/doc/man. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-manuals. *** Error code 1 Stop in /usr/ports/x11. su-2.04# ========================================================================================= I tried again and got macro "!" not recognized -- ignoring macro "macro" not recognized -- ignoring Segmentation fault - core dumped appended, after re-boot bash-2.04$ startx& [1] 526 bash-2.04$ Fatal server error: Cannot open log file "/var/log/XFree86.0.log" When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. uname -a FreeBSD earth.. 4.2-RELEASE FreeBSD 4.2-RELEASE #7: Wed Dec 19 18:49:23 GMT 2001 morten@earth..:/usr/src/sys/compile/earth i386 I went into directory /usr/ports/x11 and typed make install. some strange questons came and I typed the default [yes] to all of them :-) Can someone please help me to solve this problem ? before I start to hack, you surely need some more information ? Right now, Im sitting on a debian Linux workstation. I can start freebsd, login as morten or root, but I can't start any xserver. This log file "/var/log/XFree86.0.log" was not present on my system. Yours Sincerely Morten Gulbrandsen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 19: 1: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 369E637B417 for ; Wed, 26 Dec 2001 19:01:06 -0800 (PST) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id D34AD2B6B2; Thu, 27 Dec 2001 04:00:21 +0100 (CET) Received: by k7.mavetju.org (Postfix, from userid 1001) id 68B103B1; Thu, 27 Dec 2001 14:00:05 +1100 (EST) Date: Thu, 27 Dec 2001 14:00:05 +1100 From: Edwin Groothuis To: Morten Gulbrandsen Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: startx crashes FreeBSD 4.2 Message-ID: <20011227140005.B1000@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , Morten Gulbrandsen , "freebsd-questions@FreeBSD.ORG" References: <3C2A8B9B.D509315C@T-Online.DE> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C2A8B9B.D509315C@T-Online.DE>; from morten.gulbrandsen@t-online.de on Thu, Dec 27, 2001 at 03:46:51AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 03:46:51AM +0100, Morten Gulbrandsen wrote: > Hello, my problem is: > startx gives fatal server error. You should install only the port you're looking for, not everybody in the x11-category: cd /usr/ports/x11/XFree85-4 make install After you've installed it, run xf86config (or xf86cfg, I'm never sure which one) and go on with the configuration stuff. Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: ------------------+ http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 19: 4: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe47.pav2.hotmail.com [64.4.36.19]) by hub.freebsd.org (Postfix) with ESMTP id 911C937B405 for ; Wed, 26 Dec 2001 19:04:04 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 26 Dec 2001 19:04:04 -0800 X-Originating-IP: [66.32.91.221] From: "Jeff Jeter" To: "Jerry McAllister" Cc: "FreeBSD Questions" References: <200112250342.fBP3gsj05646@clunix.cl.msu.edu> Subject: Re: New Disk on IDE card Date: Wed, 26 Dec 2001 10:03:49 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Message-ID: X-OriginalArrivalTime: 27 Dec 2001 03:04:04.0559 (UTC) FILETIME=[2465B5F0:01C18E83] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, while reading the WINE documentation, i noticed that a Win9x sys was recomended. I installed win98 on the new drive, and it now mounts fine. Thanks for all the help Jeff Jeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 19:25: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 127EE37B405 for ; Wed, 26 Dec 2001 19:25:00 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Wed, 26 Dec 2001 22:27:11 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: kernel config file device syntax Date: Wed, 26 Dec 2001 22:24:57 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The device command is used to define the serial com ports. Where do I find the descriptions of the fields used? It sure is not man device. # Serial (COM) ports what do there fields mean device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? port IO_COM3 irq 5 #device sio3 at isa? port IO_COM4 irq 9 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 19:58:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.27in.tv (roc-66-24-112-7.rochester.rr.com [66.24.112.7]) by hub.freebsd.org (Postfix) with ESMTP id 1A0DD37B416 for ; Wed, 26 Dec 2001 19:58:25 -0800 (PST) Received: (from root@localhost) by mail.27in.tv (8.11.6/8.11.6) id fBR3wNO63389; Wed, 26 Dec 2001 22:58:23 -0500 (EST) (envelope-from cjm2@earthling.net) Received: from maxpower (trilluser@maxpower.lan.27in.tv [10.0.0.250]) by mail.27in.tv (8.11.6/8.11.6av) with SMTP id fBR3wEM63375; Wed, 26 Dec 2001 22:58:22 -0500 (EST) (envelope-from cjm2@earthling.net) From: "C J Michaels" To: "Linh Pham" , Cc: Subject: RE: HP Deskjet Printer 712C Date: Wed, 26 Dec 2001 22:59:48 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: <20011219094216.K22325-100000@q.closedsrc.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Check out https://sourceforge.net/projects/pnm2ppa/ It's a ghostscript printer filter to allow printing to PPA (win-printer) deskjets. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Linh Pham Sent: Wednesday, December 19, 2001 12:44 PM To: Vitman3852@aol.com Cc: FreeBSD-questions@FreeBSD.ORG Subject: Re: HP Deskjet Printer 712C On 2001-12-19, Vitman3852@aol.com scribbled: # I have the above printer and I can't seem to get it to print via the command # line or X-window apps. I'm running BSD 4.4, and I have tried the 'apsfilter' # package. Several HP printers are supported by this package, but the 712 is # not amung them. It looks like the Desktop 710C/712C is a Windows-only GID printer (according to the printer's manual). It should state that on the first page in chapter five of the user's guide, which is available on-line at: http://www.hp.com/cposupport/manual_set/bpd06048.pdf -- Linh Pham [lplist@closedsrc.org] # Every solution breeds new problems To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20: 5:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-31-201-166.mmcable.com [65.31.201.166]) by hub.freebsd.org (Postfix) with SMTP id 1DB8337B417 for ; Wed, 26 Dec 2001 20:05:36 -0800 (PST) Received: (qmail 58001 invoked by uid 100); 27 Dec 2001 04:05:32 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15402.40460.473447.960676@guru.mired.org> Date: Wed, 26 Dec 2001 22:05:32 -0600 To: rene@xs4all.nl Cc: questions@freebsd.org Subject: Re: robust copy program required In-Reply-To: <17237838@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ X-Delivery-Agent: TMDA v0.42/Python 2.1.1 (freebsd4) From: "Mike Meyer" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG rene@xs4all.nl types: > Hi. I have several CDROMs with some scratches etc. Have you considered trying to polish the scratches out? I've rescued a few with toothpaste and elbow grease. > I'd like to get my hands on a copy tool that can log anything that is > un-copyable, but DOES copy the rest on the CDROM. > > is there such a thing for unix? i guess it may come as a script of some sort? dd will do the trick for reading the image in: dd if=/dev/cd0c of=cd-image bs=2048 conv=noerror,sync Adjust the device as appropriate for your system. If you are using audio CDs, you'll need to change the block size. See the archives for what it should be. You can then burn the image with burncd or cdrecord. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:14:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-31-201-166.mmcable.com [65.31.201.166]) by hub.freebsd.org (Postfix) with SMTP id B614C37B416 for ; Wed, 26 Dec 2001 20:14:48 -0800 (PST) Received: (qmail 58092 invoked by uid 100); 27 Dec 2001 04:14:48 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15402.41015.825926.250358@guru.mired.org> Date: Wed, 26 Dec 2001 22:14:47 -0600 To: "Michael Kreykenbohm" Cc: questions@freebsd.org Subject: Re: pre-built firewall kernel In-Reply-To: <24224321@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ X-Delivery-Agent: TMDA v0.42/Python 2.1.1 (freebsd4) From: "Mike Meyer" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Michael Kreykenbohm types: > This is a multi-part message in MIME format. > > ------=_NextPart_000_0005_01C18E1B.E7868AE0 > Content-Type: text/plain; > charset="iso-8859-1" > Content-Transfer-Encoding: quoted-printable Please adjust your mailer to not send HTML copies along with the plain text. You tend to get better results hree. > Everythings looks great with the little system I setup, until I realized = > that the kernel does not have the firewall flags compiled into it. > Since I do not have the disk space for all the tools to compile etc, I = > was wondering if one of the distributions was already compliled > as a firewall, all I seem to need is a kernel itself with the generic = > items. Unlike Linux, FreeBSD isn't fragmented into a countably infinite number of "distributions". There's really just the one. However, you don't need to recompile the kernel to get a firewall on recent releases of FreeBSD. The ipfw firewall module can be loaded into generic, and works just fine. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:15:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from polaris.spdcc.com (bipolar.win2k.SPDCC.COM [140.186.80.24]) by hub.freebsd.org (Postfix) with ESMTP id 47D8737B405 for ; Wed, 26 Dec 2001 20:15:47 -0800 (PST) Received: from dharma [66.30.187.181] by polaris.spdcc.com with ESMTP (SMTPD32-6.05) id AF83BE50228; Wed, 26 Dec 2001 19:46:59 -0500 From: "Leonard Jacobs" To: freebsd-questions@freebsd.org Date: Wed, 26 Dec 2001 19:46:36 -0500 MIME-Version: 1.0 Subject: linux executables on FreeBSD 4.4 Reply-To: lj@mandala-designs.com Message-ID: <3C2A291C.24266.1EC433AD@localhost> X-mailer: Pegasus Mail for Windows (v4.01) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can most executables for both Red Hat Linux 6.1 and 7.1 run on FreeBSD 4.4?----------------- - Leonard Jacobs www.mandala-designs.com (508) 359-5753 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:17:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from guru.mired.org (okc-65-31-201-166.mmcable.com [65.31.201.166]) by hub.freebsd.org (Postfix) with SMTP id 1657A37B417 for ; Wed, 26 Dec 2001 20:17:28 -0800 (PST) Received: (qmail 58138 invoked by uid 100); 27 Dec 2001 04:17:27 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15402.41175.27398.144829@guru.mired.org> Date: Wed, 26 Dec 2001 22:17:27 -0600 To: leegold Cc: questions@freebsd.org Subject: Re: Packages for Fbsd 5.0 not installing on Fbsd4.4 In-Reply-To: <80227292@toto.iv> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ X-Delivery-Agent: TMDA v0.42/Python 2.1.1 (freebsd4) From: "Mike Meyer" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG leegold types: > I have FreeBSd 4.4 installed. I have a disk fro %.0 > (all this is from the book: "FreeBSd Unleashed". > I tried installing Window managers from the 5.0 disk > and they install but do not work. Yes, they don't work. You can't do that. 5.0 software must be run on a 5.0 system. > Does Sio5 (or SIO5) library ring a bell? I get a error > message refering to this when I try to run a WM installed > from the 5.0 disk. No, but I don't have a 5.0 system to look at. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:20:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from molly.intercom.net (molly.intercom.net [216.240.106.84]) by hub.freebsd.org (Postfix) with ESMTP id 5EBFC37B405 for ; Wed, 26 Dec 2001 20:20:32 -0800 (PST) Received: from cross (hh1124030.direcpc.com [206.71.124.30]) by molly.intercom.net (8.12.1/8.12.1) with SMTP id fBR4Kwpk028469; Wed, 26 Dec 2001 23:21:00 -0500 (EST) Message-ID: <003c01c18e8d$83c17070$0273150a@woodstock.lanalyse.com> From: "Ron Hensley" To: , References: <3C2A291C.24266.1EC433AD@localhost> Subject: Re: linux executables on FreeBSD 4.4 Date: Wed, 26 Dec 2001 23:18:08 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 They are different architectures so not really interchangeable by themselves. However you can enable 'linux binary support' into the FreeBSD Kernel /stand/sysinstall/configure/startup The system will then be able to emulate a Linux kernel and execute those linux binaries. - ----- Original Message ----- From: "Leonard Jacobs" To: Sent: Wednesday, December 26, 2001 7:46 PM Subject: linux executables on FreeBSD 4.4 > Can most executables for both Red Hat Linux 6.1 and 7.1 run on FreeBSD 4.4?----------------- > - > > Leonard Jacobs > www.mandala-designs.com > (508) 359-5753 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBPCqg/1Fb04N5DzUjEQKQVwCfcrh+LFAKiJwMr1DV8/3tTBJ277EAn3TO qlo/FAUPTXWs9b/5PPFiQDme =meMa -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:31:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id E4C4B37B419 for ; Wed, 26 Dec 2001 20:31:25 -0800 (PST) Received: from barbish ([63.70.155.104]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Wed, 26 Dec 2001 23:33:37 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: internal pci modems and pnpinfo Date: Wed, 26 Dec 2001 23:31:22 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The FBSD FAQ below tells about using pnpinfo to get the info needed to post entry in sio.c file. I'm at 4.4 and using a pci pnp internal modem. At boot time I get the unknown card message. Pnpinfo returns no info. Is pnpinfo only for isa modems. How do I get the info to enter into sio.c table? 4.26. Why is my PnP card no longer found (or found as unknown) since upgrading to FreeBSD 4.x? FreeBSD 4.x is now much more PnP-centric and this has had the side effect of some PnP devices (e.g. sound cards and internal modems) not working even though they worked under FreeBSD 3.x. The reasons for this behaviour are explained by the following e-mail, posted to the freebsd-questions mailing list by Peter Wemm, in answer to a question about an internal modem that was no longer found after an upgrade to FreeBSD 4.x (the comments in [] have been added to clarify the context. The PNP bios preconfigured it [the modem] and left it laying around in port space, so [in 3.x] the old-style ISA probes ``found'' it there. Under 4.0, the ISA code is much more PnP-centric. It was possible [in 3.x] for an ISA probe to find a ``stray'' device and then for the PNP device id to match and then fail due to resource conflicts. So, it disables the programmable cards first so this double probing cannot happen. It also means that it needs to know the PnP id's for supported PnP hardware. Making this more user tweakable is on the TODO list. To get the device working again requires finding its PnP id and adding it to the list that the ISA probes use to identify PnP devices. This is obtained using pnpinfo(8) to probe the device, for example this is the output from pnpinfo(8) for an internal modem: # pnpinfo Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID PMC2430 (0x3024a341), Serial Number 0xffffffff PnP Version 1.0, Vendor Version 0 Device Description: Pace 56 Voice Internal Plug & Play Modem Logical Device ID: PMC2430 0x3024a341 #0 Device supports I/O Range Check TAG Start DF I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8 [16-bit addr] IRQ: 4 - only one type (true/edge) [more TAG lines elided] TAG End DF End Tag Successfully got 31 resources, 1 logical fdevs -- card select # 0x0001 CSN PMC2430 (0x3024a341), Serial Number 0xffffffff Logical device #0 IO: 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 IRQ 5 0 DMA 4 0 IO range check 0x00 activate 0x01 The information you require is in the ``Vendor ID'' line at the start of the output. The hexadecimal number in parentheses (0x3024a341 in this example) is the PnP id and the string immediately before this (PMC2430) is a unique ASCII id. This information needs adding to the file /usr/src/sys/isa/sio.c. You should first make a backup of sio.c just in case things go wrong. You will also need it to make the patch to submit with your PR (you are going to submit a PR, are you not?) then edit sio.c and search for the line static struct isa_pnp_id sio_ids[] = { then scroll down to find the correct place to add the entry for your device. The entries look like this, and are sorted on the ASCII Vendor ID string which should be included in the comment to the right of the line of code along with all (if it will fit) or part of the Device Description from the output of pnpinfo(8): {0x0f804f3f, NULL}, /* OZO800f - Zoom 2812 (56k Modem) */ {0x39804f3f, NULL}, /* OZO8039 - Zoom 56k flex */ {0x3024a341, NULL}, /* PMC2430 - Pace 56 Voice Internal Modem */ {0x1000eb49, NULL}, /* ROK0010 - Rockwell ? */ {0x5002734a, NULL}, /* RSS0250 - 5614Jx3(G) Internal Modem */ Add the hexadecimal Vendor ID for your device in the correct place, save the file, rebuild your kernel, and reboot. Your device should now be found as an sio device as it was under FreeBSD 3.x To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:46:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.mrf.mail.rcn.net (smtp02.mrf.mail.rcn.net [207.172.4.61]) by hub.freebsd.org (Postfix) with ESMTP id 4C0C637B405 for ; Wed, 26 Dec 2001 20:46:47 -0800 (PST) Received: from 66-44-58-169.s169.tnt3.lnhva.md.dialup.rcn.com ([66.44.58.169] helo=sten.alder.net) by smtp02.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16JSRA-0006pk-00 for freebsd-questions@freebsd.org; Wed, 26 Dec 2001 23:46:37 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Wed, 26 Dec 2001 23:45:36 -0500 Date: Wed, 26 Dec 2001 23:45:36 -0500 From: "Bob Hall" To: freebsd-questions@freebsd.org Subject: Re: windowsXP Product O.D.# Extraction Tool Message-ID: <20011226234536.B1084@starpower.net> Mail-Followup-To: freebsd-questions@freebsd.org References: <8.1eb8da6e.295ba13b@aol.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <8.1eb8da6e.295ba13b@aol.com>; from bbadgger@aol.com on Wed, Dec 26, 2001 at 04:55:07PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 04:55:07PM -0500, bbadgger@aol.com wrote: > I was sent to This address to obtain an extration boot disk to retrive my > windows XP Product I.D.# which was misplaced or lost. After reviewing your > information I am doubtful that you can be of any resource to me and my cause, > however I am an amature and really don't know if I am at the right place or > not. The address I was given is as fok=\\llows > "home.eunet.no/~tenordah2/ntpasswd/bootdisk.html" can you advise. Thank-you> You need to go back to your original source and get the correct information. Eunet.no's only connection to FreeBSD is the 'Powered by FreeBSD' icon on their web site. FreeBSD's only connection with Windows XP is the large chunks of networking code that Microsoft 'liberated' from the FreeBSD source and applied to Windows. (Data just wants to be free!) So if you want to study the source code for the IP stack endorsed by Bill Gates, you're at the right place. But for MS product IDs... I'm sorry, I spell my name 'Danger'. Bob Hall To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 20:53:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom01.kundenserver.de (moutvdom01.kundenserver.de [195.20.224.200]) by hub.freebsd.org (Postfix) with ESMTP id 2880237B416 for ; Wed, 26 Dec 2001 20:53:37 -0800 (PST) Received: from [195.20.224.220] (helo=mrvdom04.kundenserver.de) by moutvdom01.kundenserver.de with esmtp (Exim 2.12 #2) id 16JSXv-000355-00; Thu, 27 Dec 2001 05:53:35 +0100 Received: from pd9017269.dip.t-dialin.net ([217.1.114.105]) by mrvdom04.kundenserver.de with esmtp (Exim 2.12 #2) id 16JSXv-0005Uh-00; Thu, 27 Dec 2001 05:53:35 +0100 Date: Thu, 27 Dec 2001 04:54:00 +0000 (GMT) From: "P. U. (Uli) Kruppa" X-X-Sender: To: Johann Sharizan Cc: Subject: Re: Teaching parents UNIX In-Reply-To: <20011226225249.2f731ce6.johann@broadpark.no> Message-ID: <20011227044746.A17756-100000@big> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Johann, On Wed, 26 Dec 2001, Johann Sharizan wrote: > My mother and sister hardly knows how to navigate > through Windows :-) > > What is the best way of flash-teaching them how the most > basic of basic things are done FreeBSD? I'm not fit for > hours explaining. And this is the only system I have > available to her. There is no flash-teaching. Ask them what they need to do on their machine. If they want to surf the web, explain mozilla to them, if they wish to type some letters explain how to use StarOffice. If they wish to use digital cameras and scanners, buy them a WinXP. Regards, Uli. ************************************ * P. U. Kruppa - Wuppertal * * Germany * * www.pukruppa.de www.2000d.de * ************************************ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 21:44:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ottawa.com (mail.ottawa.com [209.217.94.166]) by hub.freebsd.org (Postfix) with ESMTP id 67A5E37B41A for ; Wed, 26 Dec 2001 21:44:25 -0800 (PST) Received: (from ottawa@localhost) by mail.ottawa.com (8.9.2-aidan/8.9.2) id BAA08823; Thu, 27 Dec 2001 01:00:01 -0500 (EST) Date: Thu, 27 Dec 2001 01:00:01 -0500 (EST) Message-Id: <200112270600.BAA08823@mail.ottawa.com> To: freebsd-questions@freebsd.org From: VVK Subject: anyone running JAIL with DHCP setup (especially @HOME)??? HELP! X-Account: 5901 X-Sender-IP: 161.114.88.72 Mime-Version: 1.0 Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've been running jail successfully for almost 2 years now. Today my cable company changed static configuration to DHCP one. I've reconfigured my to use DHCP, however, jail would not work. in /etc/rc.conf: ifconfig_ed0="DHCP" ifconfig_ed0_alias0="inet 192.168.0.30 netmask 255.255.255.0" ifconfig_ed1="inet 192.168.0.1 netmask 255.255.255.128" ifconfig_ed1_alias0="inet 192.168.0.10 netmask 0xffffffff" hostname="crxxxxxx-E" inetd_flags="-wW -R 1024 -a 192.168.0.30" portmap_enable="YES" nfs_client_enable="YES" nfs_reserved_port_only="YES" nfs_server_enable="YES" # using this to mount drives/directories from jail in /etc/dhclient.conf send host-name "crxxxxxxx-E"; # Put your client IP here request subnet-mask, broadcast-address, routers, domain-name-servers; now, the problem is with the following: jail works fine (SSH/TELNET/etc) when i don't have /etc/resolv.conf. however, i cannot connect to any host from jail as it cannot resolve it. as soon as i put it in with correct DNS numbers, it starts giving me hard time: connects, say, to port 22, but no SSH header is displayed and same with other daemons.. inside jail, i have the following: root@me:/home/me>>ifconfig -a ed0: flags=8843 mtu 1500 ether 00:50:ba:cd:9a:fa ed1: flags=8843 mtu 1500 inet 192.168.0.10 netmask 0xffffffff broadcast 192.168.0.10 ether 00:50:ba:cd:b9:60 lo0: flags=8049 mtu 16384 there is no address associated with ed0 (my external nic) while in host system it shows the following: ed0: flags=8843 mtu 1500 inet 24.xx.xx.247 netmask 0xffffff00 broadcast 24.xx.xx.255 ether 00:50:ba:cd:9a:fa ed1: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xffffff80 broadcast 192.168.0.127 inet 192.168.0.10 netmask 0xffffffff broadcast 192.168.0.10 ether 00:50:ba:cd:b9:60 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 output of jail: Skipping disk checks ... Doing initial network setup:. ifconfig: ioctl (SIOCDIFADDR): permission denied lo0: flags=8049 mtu 16384 Additional routing options: TCP keepalive=YESsysctl: net.inet.tcp.always_keepalive: Operation not permitted . Routing daemons:. Additional daemons: syslogd. Doing additional network setup:. Checking quotas: done. Enabling quotas: done. Starting final network daemons:. Turning on accounting: accton: /var/account/acct: Operation not permitted ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Starting standard daemons: inetd cron sshd. Initial rc.i386 initialization:. Configuring syscons: blanktime/etc/rc.syscons: cannot open /dev/ttyv0: no such file . Additional ABI support:. Starting local daemons:. Local package initialization: idled. Additional TCP options: log_in_vain=YESsysctl: net.inet.tcp.log_in_vain: Operation not permitted sysctl: net.inet.udp.log_in_vain: Operation not permitted ^^^^^^ e What might be the problem? Have you ever heard about this? Is there a fix? Would greatly appreciate any helo/hints. THANK YOU< Get your Free email at http://mail.ottawa.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 22:14:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 26CA437B41C for ; Wed, 26 Dec 2001 22:14:15 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBR6EAR63863; Thu, 27 Dec 2001 07:14:11 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <003401c18e9d$b31a00c0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Andrei Popov" Cc: "FreeBSD Questions" References: <20011226091540.A70996@m-net.arbornet.org> <20011226151905.GA84869@dan.emsphone.com> <20011226124857.A30355@m-net.arbornet.org> Subject: Re: Swap not used *at**all* Date: Thu, 27 Dec 2001 07:14:10 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > But the question still remains -- is it not odd > that there's no swapping when running X, nor is > there one when running fairly expenmsive Postgres > selects et al? What do your memory statistics look like when you run them? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 22:17:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 77B0F37B416 for ; Wed, 26 Dec 2001 22:17:20 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBR6HIR63887; Thu, 27 Dec 2001 07:17:18 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <004301c18e9e$22d25070$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Johann Sharizan" Cc: "FreeBSD Questions" References: <20011226225249.2f731ce6.johann@broadpark.no> Subject: Re: Teaching parents UNIX Date: Thu, 27 Dec 2001 07:16:49 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Why do you want to teach them UNIX? Have they asked to learn about it? ----- Original Message ----- From: "Johann Sharizan" To: Sent: Wednesday, December 26, 2001 22:52 Subject: Teaching parents UNIX > Hai hai! > > My mother and sister hardly knows how to navigate through Windows :-) > > What is the best way of flash-teaching them how the most basic of basic things > are done FreeBSD? I'm not fit for hours explaining. And this is the only system > I have available to her. > > I havn't really found anything she might comprehend on freebsd.org, nor on any of > its links. If I'm missing something here, please enlighten me =) > > Regards, > Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 22:20:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 292F537B416 for ; Wed, 26 Dec 2001 22:20:47 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBR6KkR63901 for ; Thu, 27 Dec 2001 07:20:46 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <005901c18e9e$9edcc510$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "FreeBSD Questions" References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> Subject: Re: Teaching parents UNIX Date: Thu, 27 Dec 2001 07:20:46 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The real answer, like it or not, is to keep your mother and sister on Windows. Just because you may prefer FreeBSD doesn't mean that everyone around you has to prefer it as well. ----- Original Message ----- From: "Tom Parquette" To: Cc: Sent: Thursday, December 27, 2001 01:44 Subject: Re: Teaching parents UNIX > I think we have a trend here... > I agree with the suggestions from the other folks. > > I'd take the suggestions one step further. Install fvwm95. I had it running on a test system and it was close enough to window$ that I could work with it without RTFM first. > > If security on your machine is not an issue, I'd accept the other suggestion and set up a passwordless account, and the scripting, to bring up fvwm95 without them having to do anything. > > FWIW, When my wife first tried to learn to use a PC it was DOS and no GUI. I don't know who was more frustrated, her or me!! But, she picked up the window$ "GUI" fairly quickly on her own. > > Cheers... > BTW, I survived teaching my wife. Even if I do end up acting like a captive Help Desk. ;-) > -----Original Message----- > From: Johann Sharizan > To: freebsd-questions@freebsd.org > Date: Wed, 26 Dec 2001 22:52:49 +0100 > Subject: Teaching parents UNIX > > Hai hai! > > My mother and sister hardly knows how to navigate through Windows :-) > > What is the best way of flash-teaching them how the most basic of basic things > are done FreeBSD? I'm not fit for hours explaining. And this is the only system > I have available to her. > > I havn't really found anything she might comprehend on freebsd.org, nor on any of > its links. If I'm missing something here, please enlighten me =) > > Regards, > Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > Try not. Do or do not. There is no try. -- Yoda > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 22:29:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.umr.edu (mrelay1.cc.umr.edu [131.151.1.120]) by hub.freebsd.org (Postfix) with ESMTP id 45C3637B41B for ; Wed, 26 Dec 2001 22:29:11 -0800 (PST) Received: from ultra18.cs.umr.edu (ultra18.cs.umr.edu [131.151.89.2]) via ESMTP by mrelay1.cc.umr.edu (8.12.1/) id fBR6T9OT012265; Thu, 27 Dec 2001 00:29:09 -0600 Received: (from thill@localhost) by ultra18.cs.umr.edu (8.12.1/8.12.0.Beta7) id fBR6T9C8027466; Thu, 27 Dec 2001 00:29:09 -0600 (CST) Date: Thu, 27 Dec 2001 00:29:09 -0600 From: Daniel Thill To: Joe & Fhe Barbish Cc: freebsd-questions@freebsd.org Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw Message-ID: <20011227002909.D26741@umr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.17i In-Reply-To: ; from barbish@a1poweruser.com on Tue, Dec 25, 2001 at 10:10:07PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Is there a way using firewalls to identify www advertising Banners & the > auto spawning of wed pages so they can be blocked? It doesn't involve firewalls, but check out the Junkbuster port. It's an http proxy server that allows you to filter out files by address and regular expressions. It can only block files though, not filter out the popups. -dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 22:53: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id A746837B416 for ; Wed, 26 Dec 2001 22:52:59 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP id HAA12696 (8.8.8/1.13); Thu, 27 Dec 2001 07:52:56 +0100 (MET) Message-Id: <200112270652.HAA12696@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: Daniel Thill Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw Date: Thu, 27 Dec 2001 07:57:52 +0000 X-Mailer: KMail [version 1.3.2] References: <20011227002909.D26741@umr.edu> In-Reply-To: <20011227002909.D26741@umr.edu> Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In KDE it is possible you can set the web browser to dissable pop-ups. Setting -> Configure Konqueror -> Konqueror Browser -> JavaScript. The rest is easy to see. Simon Siemonsma On Thursday 27 December 2001 06:29, you wrote: > > Is there a way using firewalls to identify www advertising Banners & the > > auto spawning of wed pages so they can be blocked? > > It doesn't involve firewalls, but check out the Junkbuster port. It's > an http proxy server that allows you to filter out files by address and > regular expressions. It can only block files though, not filter out > the popups. > > -dan > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Dec 26 23:45:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id B774A37B417 for ; Wed, 26 Dec 2001 23:45:46 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBR7jeR64054; Thu, 27 Dec 2001 08:45:40 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <007701c18eaa$7be42ba0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Simon Siemonsma" , "Daniel Thill" Cc: References: <20011227002909.D26741@umr.edu> <200112270652.HAA12696@smtp.hccnet.nl> Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw Date: Thu, 27 Dec 2001 08:45:40 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How about just setting your DNS or hosts file to point to a bogus location for domains that serve advertisements? I've done that in the past, thereby replacing advertising banners with plain blank boxes (served by my own machine, to which I pointed the ad-serving domains). It makes things load a lot faster and it's less distracting. As for pop-ups, unless your browser allows you to selectively disable certain Javascript functions (as Konqueror might, but most other browsers don't), the only way to get rid of them is to disable Javascript entirely in your browser, which has certain other inconveniences (a lot of sites are too poorly designed to work without it). ----- Original Message ----- From: "Simon Siemonsma" To: "Daniel Thill" Cc: Sent: Thursday, December 27, 2001 08:57 Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw > In KDE it is possible you can set the web browser to dissable pop-ups. > Setting -> Configure Konqueror -> Konqueror Browser -> JavaScript. > The rest is easy to see. > > Simon Siemonsma > > On Thursday 27 December 2001 06:29, you wrote: > > > Is there a way using firewalls to identify www advertising Banners & the > > > auto spawning of wed pages so they can be blocked? > > > > It doesn't involve firewalls, but check out the Junkbuster port. It's > > an http proxy server that allows you to filter out files by address and > > regular expressions. It can only block files though, not filter out > > the popups. > > > > -dan > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 0: 6:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from poontang.schulte.org (poontang.schulte.org [209.134.156.197]) by hub.freebsd.org (Postfix) with ESMTP id 41F6437B405 for ; Thu, 27 Dec 2001 00:06:15 -0800 (PST) Received: from tarmap.nospam.schulte.org (tarmap.schulte.org [209.134.156.198]) by poontang.schulte.org (Postfix) with ESMTP id D74C7D15AF; Thu, 27 Dec 2001 02:05:54 -0600 (CST) Message-Id: <5.1.0.14.0.20011227020335.00bd9000@pop3s.schulte.org> X-Sender: (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 27 Dec 2001 02:05:50 -0600 To: Thomas D'Amico , freebsd-questions@FreeBSD.ORG From: schulte+freebsd@nospam.schulte.org Subject: Re: How do I acquire your entire freebsd downloads? In-Reply-To: <20011227015421.64132.qmail@web9204.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Thomas. To see a list of places to download FreeBSD from, see http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors.html The FAQ is a good place to start learning how to install/configure/use FreeBSD http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/install.html Also take a look at the handbook http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html Have fun, good luck. At 05:54 PM 12/26/2001 -0800, Thomas D'Amico wrote: >I wish to download off the internet all your free >software, drivers, etc. I'll be happy to contribute to >your great program. Please advise and guide me, I >don't see any free downloads on your site, only >retailers selling them (CD's)! Please Help. Thanks, Tom. > >__________________________________________________ >Do You Yahoo!? >Send your FREE holiday greetings online! >http://greetings.yahoo.com > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 0:27:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from services.webwarrior.net (overlord-host99.dsl.visi.com [209.98.86.99]) by hub.freebsd.org (Postfix) with ESMTP id 7BDD837B405 for ; Thu, 27 Dec 2001 00:27:09 -0800 (PST) Received: from twincat.vladsempire.net (unknown [209.105.45.58]) by services.webwarrior.net (Postfix) with ESMTP id 865E8512 for ; Thu, 27 Dec 2001 02:26:43 -0600 (CST) Received: by twincat.vladsempire.net (Postfix, from userid 1001) id 254953873; Thu, 27 Dec 2001 01:57:11 +0000 (GMT) Date: Thu, 27 Dec 2001 01:57:11 +0000 From: Josh Paetzel To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: kernel config file device syntax Message-ID: <20011227015710.B252@twincat.vladsempire.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Wed, Dec 26, 2001 at 10:24:57PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 10:24:57PM -0500, Joe & Fhe Barbish wrote: > The device command is used to define the serial com ports. > Where do I find the descriptions of the fields used? > It sure is not man device. man sio Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 0:34:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id AD6C837B416 for ; Thu, 27 Dec 2001 00:34:49 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JW00-0006P5-00 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 08:34:48 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 18FD2116F; Thu, 27 Dec 2001 09:34:46 +0100 (CET) Date: Thu, 27 Dec 2001 09:34:46 +0100 From: Cliff Sarginson To: FreeBSD List Subject: General question about Samba Message-ID: <20011227083446.GA19094@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I want to set up a new box here to act as a print server and an online backup system for some networked Windows machines. I have never used Samba before but am I right in presuming this is the best (only) solution for this. Secondly, slightly more complicated question. I want to use it to backup a small amount of data, but on a regular basis from a remote Windows machine. There are two options - via the Internet (cheapest, since the box is in another city) or I could set up a modem for the windows box to dial into and transfer it that way. Any suggestions or recommendations ? Thanks. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 0:56:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ideal.net.au (ion.ideal.net.au [203.20.241.5]) by hub.freebsd.org (Postfix) with ESMTP id 3A6D637B405 for ; Thu, 27 Dec 2001 00:56:20 -0800 (PST) Received: from titus.magus.cc (titus.magus.cc [203.27.67.131]) by mail.ideal.net.au (8.9.3/8.9.3) with ESMTP id TAA83605 for ; Thu, 27 Dec 2001 19:56:11 +1100 (EST) (envelope-from crowley@thegatesofhell.org) Date: Thu, 27 Dec 2001 19:59:35 +1100 (EST) From: X-X-Sender: Reply-To: To: Subject: LCD Panel Control Message-ID: <20011227195902.I2049-100000@titus.magus.cc> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Got a quick question that I havent been able to source an answer on the web yet. I want to set up an LCD Panel (Backlit 16x2 screen hooked up through the printer port). Under wintendo there is software like LCDcenter, but I want to be able to control the LCD Panel though my FreeBSD box, where I can write a funky little script that can display whatever I want it to. Any suggestions on how best to do this. Is there like an app I can compile, or is there a perl module available etc etc. Any help would be great. Cheers Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 1: 3:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f103.law11.hotmail.com [64.4.17.103]) by hub.freebsd.org (Postfix) with ESMTP id 38A9037B416 for ; Thu, 27 Dec 2001 01:03:53 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 27 Dec 2001 01:03:53 -0800 Received: from 24.116.158.21 by lw11fd.law11.hotmail.msn.com with HTTP; Thu, 27 Dec 2001 09:03:52 GMT X-Originating-IP: [24.116.158.21] From: "Charles Burns" To: anthony@freebie.atkielski.com, freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Date: Thu, 27 Dec 2001 02:03:52 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 27 Dec 2001 09:03:53.0122 (UTC) FILETIME=[682F0020:01C18EB5] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >The real answer, like it or not, is to keep your mother and sister on >Windows. Just because you may prefer FreeBSD doesn't mean that everyone >around you has to prefer it as well. My mother, who is as computer illiterate as any, is doing just fine with Gnome, Opera web browser, Mozilla mail, and StarOffice. Teaching her the CLI, though... No. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 2:29:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monster.datasoft.nl (monster.wellance.com [195.193.128.24]) by hub.freebsd.org (Postfix) with ESMTP id 91F8D37B417 for ; Thu, 27 Dec 2001 02:29:22 -0800 (PST) Received: by monster.wellance.com with Internet Mail Service (5.5.2653.19) id ; Thu, 27 Dec 2001 11:37:40 +0100 Message-ID: <0107A170FEECD211ABE500104BD665BBFF020C@monster.wellance.com> From: Stefan de Zeeuw To: "Freebsd-Questions@Freebsd. Org (E-mail)" Subject: Weird IP problem! Date: Thu, 27 Dec 2001 11:37:38 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C18EC2.81620990" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C18EC2.81620990 Content-Type: text/plain; charset="iso-8859-1" My setup: FreeBSD4.4-RELEASE connected to a cablemodem via rl0 rl1 is connected to a HUB and 2 clients And the machine acts as a firewall/NAT config Yesterday my internet connection was dead, the cablemodem was acting strange(the lights) and I did a power recycle on the modem, nothing happend, same results. After that I found this in my log: Dec 25 17:07:37 FIREWALL /kernel: arp: unknown hardware address format (0x0800) Dec 26 03:01:44 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 03:02:54 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 03:04:14 FIREWALL last message repeated 2 times Dec 26 03:14:56 FIREWALL last message repeated 14 times Dec 26 03:19:10 FIREWALL last message repeated 13 times Dec 26 05:15:02 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 09:23:25 FIREWALL /kernel: arplookup 192.168.100.1 failed: host is not on local network Dec 26 09:47:33 FIREWALL /kernel: arplookup 192.168.100.1 failed: host is not on local network Dec 26 09:50:16 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 09:50:16 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 09:50:16 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:23:49 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:23:51 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:23:51 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:23:51 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:23:51 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:24:43 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:24:51 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:24:52 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:24:52 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:24:52 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:26:40 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:26:43 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:26:43 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:26:43 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:26:43 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:39:01 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my IP address 0.0.0.0! Dec 26 10:39:01 FIREWALL last message repeated 51 times Dec 26 11:37:59 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my IP address 0.0.0.0! Dec 26 11:37:59 FIREWALL last message repeated 256 times Dec 26 11:52:13 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 12:20:47 FIREWALL login: ROOT LOGIN (root) ON ttyv0 Dec 26 12:24:02 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 12:24:02 FIREWALL last message repeated 64 times Dec 26 12:26:18 FIREWALL last message repeated 5 times Dec 26 12:26:18 FIREWALL dhclient: New IP Address(rl0): 213.73.160.xxx Dec 26 12:26:18 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 12:26:18 FIREWALL dhclient: New Broadcast Address(rl0): 213.73.160.255 Dec 26 12:26:18 FIREWALL dhclient: New Routers: 213.73.160.1 It is very strange and i do not understand what may have happend here. Was it a error by my ISP or was it a intrusion attempt? After this i killed my dhclient and started it up again, assigning me my original ip address. And everything was fine. But I would like to know what happend here. Anyone have some ideas?? I would like to hear them! Sincerly Stef ------_=_NextPart_001_01C18EC2.81620990 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Weird IP problem!

My setup:
FreeBSD4.4-RELEASE connected to a cablemodem via = rl0
rl1 is connected to a HUB and 2 clients
And the machine acts as a firewall/NAT config

Yesterday my internet connection was dead, the = cablemodem was acting strange(the lights) and I did a power recycle on = the modem, nothing happend, same results.

After that I found this in my log:

Dec 25 17:07:37 FIREWALL /kernel: arp: unknown = hardware address format (0x0800)
Dec 26 03:01:44 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 03:02:54 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 03:04:14 FIREWALL last message repeated 2 = times
Dec 26 03:14:56 FIREWALL last message repeated 14 = times
Dec 26 03:19:10 FIREWALL last message repeated 13 = times
Dec 26 05:15:02 FIREWALL natd[284]: failed to write = packet back (No route to host)
<snip>
Dec 26 09:23:25 FIREWALL /kernel: arplookup = 192.168.100.1 failed: host is not on local network
Dec 26 09:47:33 FIREWALL /kernel: arplookup = 192.168.100.1 failed: host is not on local network
Dec 26 09:50:16 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 09:50:16 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 09:50:16 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:23:49 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:23:51 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:23:51 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:23:51 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:23:51 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:24:43 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:24:51 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:24:52 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:24:52 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:24:52 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:26:40 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:26:43 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:26:43 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:26:43 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:26:43 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:39:01 FIREWALL /kernel: arp: = 00:20:40:e3:1d:7b is using my IP address 0.0.0.0!
Dec 26 10:39:01 FIREWALL last message repeated 51 = times
Dec 26 11:37:59 FIREWALL /kernel: arp: = 00:20:40:e3:1d:7b is using my IP address 0.0.0.0!
Dec 26 11:37:59 FIREWALL last message repeated 256 = times
Dec 26 11:52:13 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 12:20:47 FIREWALL login: ROOT LOGIN (root) ON = ttyv0
Dec 26 12:24:02 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 12:24:02 FIREWALL last message repeated 64 = times
Dec 26 12:26:18 FIREWALL last message repeated 5 = times
Dec 26 12:26:18 FIREWALL dhclient: New IP = Address(rl0): 213.73.160.xxx
Dec 26 12:26:18 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 12:26:18 FIREWALL dhclient: New Broadcast = Address(rl0): 213.73.160.255
Dec 26 12:26:18 FIREWALL dhclient: New Routers: = 213.73.160.1

It is very strange and i do not understand what may = have happend here. Was it a error by my ISP or was it a intrusion = attempt?

After this i killed my dhclient and started it up = again, assigning me my original ip address. And everything was = fine.
But I would like to know what happend here. Anyone = have some ideas??
I would like to hear them!

Sincerly
Stef

------_=_NextPart_001_01C18EC2.81620990-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 2:36:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.oanet.com (mars.oanet.com [204.209.13.52]) by hub.freebsd.org (Postfix) with ESMTP id 8D08E37B416 for ; Thu, 27 Dec 2001 02:36:28 -0800 (PST) Received: from DIMM1 (dialin-207-153-26-12.edm.oa.net [207.153.26.12]) by mail.oanet.com (8.11.5/8.11.5) with ESMTP id fBRAlt428663 for ; Thu, 27 Dec 2001 03:47:55 -0700 Date: Thu, 27 Dec 2001 03:22:55 -0700 From: soralx@cydem.zp.ua X-Mailer: The Bat! (v1.51) Personal Reply-To: soralx@cydem.zp.ua X-Priority: 3 (Normal) Message-ID: <541517133.20011227032255@cydem.zp.ua> To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How can I setup a IDE harddrives spindown in FreeSBD 4.4? ===8<=== ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ... ad0: 2015MB [4095/16/63] at ata0-master BIOSPIO acd0: CDROM at ata1-master using BIOSPIO ===8<=== 27.12.2001, 2:18:45 [SorAlx] http://cydem.zp.ua/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 2:52:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from blueyonder.co.uk (pcow029o.blueyonder.co.uk [195.188.53.123]) by hub.freebsd.org (Postfix) with ESMTP id 4949537B405 for ; Thu, 27 Dec 2001 02:52:44 -0800 (PST) Received: from pcow029o.blueyonder.co.uk ([127.0.0.1]) by blueyonder.co.uk with Microsoft SMTPSVC(5.5.1877.757.75); Thu, 27 Dec 2001 10:52:42 +0000 Received: from gdmckee.local (unverified) by pcow029o.blueyonder.co.uk (Content Technologies SMTPRS 4.2.5) with ESMTP id for ; Thu, 27 Dec 2001 10:52:42 +0000 Received: from [192.168.0.10] (helo=p1000) by gdmckee.local with smtp (Exim 3.33 #1) id 16JY99-000LhF-00; Thu, 27 Dec 2001 10:52:23 +0000 Message-ID: <000d01c18ec4$933542c0$0a00a8c0@p1000> From: "G D McKee" To: "Stefan de Zeeuw" , "Freebsd-Questions@Freebsd. Org (E-mail)" References: <0107A170FEECD211ABE500104BD665BBFF020C@monster.wellance.com> Subject: Re: Weird IP problem! Date: Thu, 27 Dec 2001 10:52:27 -0000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000A_01C18EC4.9330AEE0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C18EC4.9330AEE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Weird IP problem!Hi Don't know about your cable modem but it sounds like it does the same as = mine. They have a build in DHCP server and your PC will grab an address = from the cable modem itself if it can't find a DHCP server up-stream. = You can test the theory by removing the lead from the back of the cable = modem and restarting dhclient!!!!! Gordon ----- Original Message -----=20 From: Stefan de Zeeuw=20 To: Freebsd-Questions@Freebsd. Org (E-mail)=20 Sent: Thursday, December 27, 2001 10:37 AM Subject: Weird IP problem! My setup:=20 FreeBSD4.4-RELEASE connected to a cablemodem via rl0=20 rl1 is connected to a HUB and 2 clients=20 And the machine acts as a firewall/NAT config=20 Yesterday my internet connection was dead, the cablemodem was acting = strange(the lights) and I did a power recycle on the modem, nothing = happend, same results. After that I found this in my log:=20 Dec 25 17:07:37 FIREWALL /kernel: arp: unknown hardware address format = (0x0800)=20 Dec 26 03:01:44 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 03:02:54 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 03:04:14 FIREWALL last message repeated 2 times=20 Dec 26 03:14:56 FIREWALL last message repeated 14 times=20 Dec 26 03:19:10 FIREWALL last message repeated 13 times=20 Dec 26 05:15:02 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 =20 Dec 26 09:23:25 FIREWALL /kernel: arplookup 192.168.100.1 failed: host = is not on local network=20 Dec 26 09:47:33 FIREWALL /kernel: arplookup 192.168.100.1 failed: host = is not on local network=20 Dec 26 09:50:16 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 = Dec 26 09:50:16 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20 Dec 26 09:50:16 FIREWALL dhclient: New Broadcast Address(rl0): = 192.168.100.255=20 Dec 26 10:23:49 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:23:51 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:23:51 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 = Dec 26 10:23:51 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20 Dec 26 10:23:51 FIREWALL dhclient: New Broadcast Address(rl0): = 192.168.100.255=20 Dec 26 10:24:43 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:24:51 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:24:52 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 = Dec 26 10:24:52 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20 Dec 26 10:24:52 FIREWALL dhclient: New Broadcast Address(rl0): = 192.168.100.255=20 Dec 26 10:26:40 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:26:43 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 10:26:43 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 = Dec 26 10:26:43 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20 Dec 26 10:26:43 FIREWALL dhclient: New Broadcast Address(rl0): = 192.168.100.255=20 Dec 26 10:39:01 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my = IP address 0.0.0.0!=20 Dec 26 10:39:01 FIREWALL last message repeated 51 times=20 Dec 26 11:37:59 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my = IP address 0.0.0.0!=20 Dec 26 11:37:59 FIREWALL last message repeated 256 times=20 Dec 26 11:52:13 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 12:20:47 FIREWALL login: ROOT LOGIN (root) ON ttyv0=20 Dec 26 12:24:02 FIREWALL natd[284]: failed to write packet back (No = route to host)=20 Dec 26 12:24:02 FIREWALL last message repeated 64 times=20 Dec 26 12:26:18 FIREWALL last message repeated 5 times=20 Dec 26 12:26:18 FIREWALL dhclient: New IP Address(rl0): 213.73.160.xxx = Dec 26 12:26:18 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20 Dec 26 12:26:18 FIREWALL dhclient: New Broadcast Address(rl0): = 213.73.160.255=20 Dec 26 12:26:18 FIREWALL dhclient: New Routers: 213.73.160.1=20 It is very strange and i do not understand what may have happend here. = Was it a error by my ISP or was it a intrusion attempt? After this i killed my dhclient and started it up again, assigning me = my original ip address. And everything was fine.=20 But I would like to know what happend here. Anyone have some ideas??=20 I would like to hear them!=20 Sincerly=20 Stef=20 ------=_NextPart_000_000A_01C18EC4.9330AEE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Weird IP problem!
Hi
 
Don't know about your cable modem but = it sounds=20 like it does the same as mine.  They have a build in DHCP server = and your=20 PC will grab an address from the cable modem itself if it can't find a = DHCP=20 server up-stream.  You can test the theory by removing the lead = from the=20 back of the cable modem and restarting dhclient!!!!!
 
Gordon
 ------=_NextPart_000_000A_01C18EC4.9330AEE0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 3: 5:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from storage.ukr.net (storage.ukr.net [212.42.64.13]) by hub.freebsd.org (Postfix) with ESMTP id 1A44837B416 for ; Thu, 27 Dec 2001 03:05:07 -0800 (PST) Received: from UKR.NET's mail service, abuse contact: abuse@ukr.net for freebsd-questions@FreeBSD.ORG with local ID 16JYLA-000Geu-00 by storage.ukr.net; Thu, 27 Dec 2001 13:04:48 +0200 Received: from [213.130.10.106] by storage.ukr.net with HTTP; Thu, 27 Dec 2001 11:04:48 +0000 (GMT) From: "Vladimir Lushnik" To: freebsd-questions@FreeBSD.ORG Subject: AC 97 Mime-Version: 1.0 X-Mailer: mPOP Web-Mail 2.19 X-Originating-IP: 192.168.2.21 via proxy deep.dn.farlep.net [213.130.10.106] Reply-To: "Vladimir Lushnik" Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Message-Id: Date: Thu, 27 Dec 2001 13:04:48 +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi ! Help cofigure AC 97 for FreeBSD 5.0 ----- ðÏÌÕÞÉÔÅ ÂÅÓÐÌÁÔÎÙÊ ÐÏÞÔÏ×ÙÊ ÑÝÉË @ukr.net ÎÁ http://freemail.ukr.net ----- ðÏÌÕÞÉÔÅ ÂÅÓÐÌÁÔÎÙÊ ÐÏÞÔÏ×ÙÊ ÑÝÉË @ukr.net ÎÁ http://freemail.ukr.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 3:15:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.tecdigital.net (tecdigital.tol.itesm.mx [132.254.97.16]) by hub.freebsd.org (Postfix) with ESMTP id 5188D37B417 for ; Thu, 27 Dec 2001 03:15:47 -0800 (PST) Received: from gandalf (unknown [148.243.246.254]) by mail.tecdigital.net (Postfix) with ESMTP id 122901D20 for ; Thu, 27 Dec 2001 05:15:41 -0600 (CST) Message-ID: <001501c18ec7$d3283bf0$0a00a8c0@gandalf> From: "Mario Doria" To: Subject: SMBFS in 4.5-PRERELEASE question Date: Thu, 27 Dec 2001 05:15:42 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, After reading the man page for mount_smbfs and /usr/src/contrib/smbfs/examples/dot.nsmbrc. I tried to create /usr/local/etc/nsmb.conf as the example states. My problem is that in any way I put the password in that file, at mount time it stills needs a password. (using mount_smbfs -N blah blah). What's the format of the password? It says it should be plaintext but the example doesn't look like plaintext, but something hashed. Any help is appreciated, Mario Doria madd@tecdigital.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 3:21:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monster.datasoft.nl (monster.wellance.com [195.193.128.24]) by hub.freebsd.org (Postfix) with ESMTP id 412D837B419 for ; Thu, 27 Dec 2001 03:21:02 -0800 (PST) Received: by monster.wellance.com with Internet Mail Service (5.5.2653.19) id ; Thu, 27 Dec 2001 12:29:22 +0100 Message-ID: <0107A170FEECD211ABE500104BD665BBFF020F@monster.wellance.com> From: Stefan de Zeeuw To: "Freebsd-Questions@Freebsd. Org (E-mail)" Subject: RE: Weird IP problem! Date: Thu, 27 Dec 2001 12:29:21 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C18EC9.BA7E13C0" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C18EC9.BA7E13C0 Content-Type: text/plain; charset="iso-8859-1" Well i allways get the same IP from the DHCP server from my ISP so I don't think this may be the problem. Even if my cable modem is off for an hour or so. So I think theoretical everyone has his own (half static)IP number, but can be changed if the ISP finds it neccesery in the future e.g. ip expansion or so. ----- Original Message ----- Hi Don't know about your cable modem but it sounds like it does the same as mine. They have a build in DHCP server and your PC will grab an address from the cable modem itself if it can't find a DHCP server up-stream. You can test the theory by removing the lead from the back of the cable modem and restarting dhclient!!!!! Gordon ----- Original Message ----- From: Stefan de Zeeuw To: Freebsd-Questions@Freebsd. Org (E-mail) Sent: Thursday, December 27, 2001 10:37 AM Subject: Weird IP problem! My setup: FreeBSD4.4-RELEASE connected to a cablemodem via rl0 rl1 is connected to a HUB and 2 clients And the machine acts as a firewall/NAT config Yesterday my internet connection was dead, the cablemodem was acting strange(the lights) and I did a power recycle on the modem, nothing happend, same results. After that I found this in my log: Dec 25 17:07:37 FIREWALL /kernel: arp: unknown hardware address format (0x0800) Dec 26 03:01:44 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 03:02:54 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 03:04:14 FIREWALL last message repeated 2 times Dec 26 03:14:56 FIREWALL last message repeated 14 times Dec 26 03:19:10 FIREWALL last message repeated 13 times Dec 26 05:15:02 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 09:23:25 FIREWALL /kernel: arplookup 192.168.100.1 failed: host is not on local network Dec 26 09:47:33 FIREWALL /kernel: arplookup 192.168.100.1 failed: host is not on local network Dec 26 09:50:16 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 09:50:16 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 09:50:16 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:23:49 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:23:51 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:23:51 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:23:51 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:23:51 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:24:43 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:24:51 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:24:52 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:24:52 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:24:52 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:26:40 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:26:43 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 10:26:43 FIREWALL dhclient: New IP Address(rl0): 192.168.100.11 Dec 26 10:26:43 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 10:26:43 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255 Dec 26 10:39:01 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my IP address 0.0.0.0! Dec 26 10:39:01 FIREWALL last message repeated 51 times Dec 26 11:37:59 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my IP address 0.0.0.0! Dec 26 11:37:59 FIREWALL last message repeated 256 times Dec 26 11:52:13 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 12:20:47 FIREWALL login: ROOT LOGIN (root) ON ttyv0 Dec 26 12:24:02 FIREWALL natd[284]: failed to write packet back (No route to host) Dec 26 12:24:02 FIREWALL last message repeated 64 times Dec 26 12:26:18 FIREWALL last message repeated 5 times Dec 26 12:26:18 FIREWALL dhclient: New IP Address(rl0): 213.73.160.xxx Dec 26 12:26:18 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 Dec 26 12:26:18 FIREWALL dhclient: New Broadcast Address(rl0): 213.73.160.255 Dec 26 12:26:18 FIREWALL dhclient: New Routers: 213.73.160.1 It is very strange and i do not understand what may have happend here. Was it a error by my ISP or was it a intrusion attempt? After this i killed my dhclient and started it up again, assigning me my original ip address. And everything was fine. But I would like to know what happend here. Anyone have some ideas?? I would like to hear them! Sincerly Stef ------_=_NextPart_001_01C18EC9.BA7E13C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable RE: Weird IP problem!

Well i allways get the same IP from the DHCP server = from my ISP so I don't think this may be the problem. Even if my cable = modem is off for an hour or so. So I think theoretical everyone has his = own (half static)IP number, but can be changed if the ISP finds it = neccesery in the future e.g. ip expansion or so.


----- Original Message -----
Hi
 
Don't know about your cable modem but it sounds like = it does the same as mine.  They have a build in DHCP server and = your PC will grab an address from the cable modem itself if it can't = find a DHCP server up-stream.  You can test the theory by removing = the lead from the back of the cable modem and restarting = dhclient!!!!!

 
Gordon
----- Original Message -----
From: Stefan de Zeeuw
To: Freebsd-Questions@Freebsd. Org (E-mail)
Sent: Thursday, December 27, 2001 10:37 AM
Subject: Weird IP problem!




My setup:
FreeBSD4.4-RELEASE connected to a cablemodem via rl0 =
rl1 is connected to a HUB and 2 clients
And the machine acts as a firewall/NAT config =

Yesterday my internet connection was dead, the = cablemodem was acting strange(the lights) and I did a power recycle on = the modem, nothing happend, same results.

After that I found this in my log:

Dec 25 17:07:37 FIREWALL /kernel: arp: unknown = hardware address format (0x0800)
Dec 26 03:01:44 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 03:02:54 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 03:04:14 FIREWALL last message repeated 2 = times
Dec 26 03:14:56 FIREWALL last message repeated 14 = times
Dec 26 03:19:10 FIREWALL last message repeated 13 = times
Dec 26 05:15:02 FIREWALL natd[284]: failed to write = packet back (No route to host)
<snip>
Dec 26 09:23:25 FIREWALL /kernel: arplookup = 192.168.100.1 failed: host is not on local network
Dec 26 09:47:33 FIREWALL /kernel: arplookup = 192.168.100.1 failed: host is not on local network
Dec 26 09:50:16 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 09:50:16 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 09:50:16 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:23:49 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:23:51 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:23:51 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:23:51 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:23:51 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:24:43 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:24:51 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:24:52 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:24:52 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:24:52 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:26:40 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:26:43 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 10:26:43 FIREWALL dhclient: New IP = Address(rl0): 192.168.100.11
Dec 26 10:26:43 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 10:26:43 FIREWALL dhclient: New Broadcast = Address(rl0): 192.168.100.255
Dec 26 10:39:01 FIREWALL /kernel: arp: = 00:20:40:e3:1d:7b is using my IP address 0.0.0.0!
Dec 26 10:39:01 FIREWALL last message repeated 51 = times
Dec 26 11:37:59 FIREWALL /kernel: arp: = 00:20:40:e3:1d:7b is using my IP address 0.0.0.0!
Dec 26 11:37:59 FIREWALL last message repeated 256 = times
Dec 26 11:52:13 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 12:20:47 FIREWALL login: ROOT LOGIN (root) ON = ttyv0
Dec 26 12:24:02 FIREWALL natd[284]: failed to write = packet back (No route to host)
Dec 26 12:24:02 FIREWALL last message repeated 64 = times
Dec 26 12:26:18 FIREWALL last message repeated 5 = times
Dec 26 12:26:18 FIREWALL dhclient: New IP = Address(rl0): 213.73.160.xxx
Dec 26 12:26:18 FIREWALL dhclient: New Subnet Mask = (rl0): 255.255.255.0
Dec 26 12:26:18 FIREWALL dhclient: New Broadcast = Address(rl0): 213.73.160.255
Dec 26 12:26:18 FIREWALL dhclient: New Routers: = 213.73.160.1

It is very strange and i do not understand what may = have happend here. Was it a error by my ISP or was it a intrusion = attempt?

After this i killed my dhclient and started it up = again, assigning me my original ip address. And everything was fine. =
But I would like to know what happend here. Anyone = have some ideas??
I would like to hear them!

Sincerly
Stef

------_=_NextPart_001_01C18EC9.BA7E13C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 4: 9: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ideal.net.au (ion.ideal.net.au [203.20.241.5]) by hub.freebsd.org (Postfix) with ESMTP id A4E5B37B405 for ; Thu, 27 Dec 2001 04:09:05 -0800 (PST) Received: from titus.magus.cc (titus.magus.cc [203.27.67.131]) by mail.ideal.net.au (8.9.3/8.9.3) with ESMTP id XAA87653 for ; Thu, 27 Dec 2001 23:09:02 +1100 (EST) (envelope-from crowley@thegatesofhell.org) Date: Thu, 27 Dec 2001 23:12:27 +1100 (EST) From: Chris Aitken X-X-Sender: Reply-To: To: Subject: ppilcd usage Message-ID: <20011227230701.C2181-100000@titus.magus.cc> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi All, Since my last post ive done some more research, and have managed to come across a thing called ppilcd. Which I was able to (eventually) compile and it seems to work in theory...... but my problem is, I cannot get it to display anything on my LCD display panel. The LCD unit is a Hytachi HD44780 compatible unit, wired into the printer port. I plug it into my wintendo machine running LCD Center, and it displays perfectly. I remove it and plug it into my FreeBSD 4.4 box, it wont display anything. If I allow ppilcd to use its defaults (it defaults to /dev/ppi0 and defaults to the built in HD44780 driver) it basically completes the program without any errors putting me back at the command line no dramas. But nothing on the screen appears. Is there anything which might be blocking the signal down the lpt port, or is there anything I have to compile, or even remove from the kernel? Any assistance on this would be greately appreciated. Thanks Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 4:38:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc52.attbi.com (rwcrmhc52.attbi.com [216.148.227.88]) by hub.freebsd.org (Postfix) with ESMTP id 3ED2537B416 for ; Thu, 27 Dec 2001 04:38:14 -0800 (PST) Received: from chk.phattydomain.com ([12.225.230.182]) by rwcrmhc52.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011227123535.VFFS6450.rwcrmhc52.attbi.com@chk.phattydomain.com> for ; Thu, 27 Dec 2001 12:35:35 +0000 To: freebsd-questions@freebsd.org Subject: ipfw + natd packet loop X-Mailer: netcat-1.10 Message-Id: <20011227123535.VFFS6450.rwcrmhc52.attbi.com@chk.phattydomain.com> Date: Thu, 27 Dec 2001 12:38:14 +0000 From: chkno@dork.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm trying to use ipfw pipes to impose bandwidth restrictions in a natd environment. I'm having an issue with packets getting caught up in some kind of loop between natd & the pipe. I am using the standard dual-nic network topology. ed1 is the exteral interface, rl0 the internal. Background info: # uname -a FreeBSD chk.phattydomain.com 4.4-STABLE FreeBSD 4.4-STABLE #1: Sun Dec 23 23:47:23 PST 2001 su@chk.phattydomain.com:/usr/src/sys/compile/CHK i386 # grep natd /etc/rc.conf natd_enable="YES" natd_flags="-use_sockets -same_ports -unregistered_only" natd_interface="ed1" # ifconfig ed1 ed1: flags=8843 mtu 1500 inet 12.225.230.182 netmask 0xfffffe00 broadcast 255.255.255.255 ether 00:80:c8:e2:b0:5a # ifconfig rl0 rl0: flags=8843 mtu 1500 inet 192.168.151.1 netmask 0xffffff00 broadcast 192.168.151.255 ether 00:50:bf:43:68:6a media: Ethernet autoselect (100baseTX ) status: active # sysctl net.inet.ip.fw net.inet.ip.fw.enable: 1 net.inet.ip.fw.one_pass: 1 net.inet.ip.fw.debug: 1 net.inet.ip.fw.verbose: 0 net.inet.ip.fw.verbose_limit: 0 net.inet.ip.fw.dyn_buckets: 256 net.inet.ip.fw.curr_dyn_buckets: 256 net.inet.ip.fw.dyn_count: 0 net.inet.ip.fw.dyn_max: 1000 net.inet.ip.fw.static_count: 8 net.inet.ip.fw.dyn_ack_lifetime: 300 net.inet.ip.fw.dyn_syn_lifetime: 20 net.inet.ip.fw.dyn_fin_lifetime: 1 net.inet.ip.fw.dyn_rst_lifetime: 1 net.inet.ip.fw.dyn_udp_lifetime: 10 net.inet.ip.fw.dyn_short_lifetime: 5 net.inet.ip.fw.dyn_grace_time: 10 # ipfw pipe show 00010: 120.000 Kbit/s 0 ms 8 sl. 1 queues (1 buckets) droptail mask: 0x00 0x00000000/0x0000 -> 0x00000000/0x0000 Relevant lines of kernel conf: options INET device miibus device rl device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 pseudo-device ether options IPFIREWALL options IPFIREWALL_FORWARD options IPDIVERT options DUMMYNET options NMBCLUSTERS=8192 Relevant lines of dmesg: rl0: port 0x7000-0x70ff mem 0x80100000-0x801000ff irq 10 at device 20.0 on pci0 rl0: Ethernet address: 00:50:bf:43:68:6a miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ed1: at port 0x240-0x25f irq 3 on isa0 ed1: address 00:80:c8:e2:b0:5a, type NE2000 (16 bit) Demonstration: ( XXX.XXX.XXX.XXX is an external address transfering a file from the firewall machine.) # echo;ipfw add 10000 pipe 10 ip from any to XXX.XXX.XXX.XXX out; ipfw zero;sleep 1;ipfw show;sleep 19;echo;ipfw show;ipfw delete 10000 10000 pipe 10 ip from any to XXX.XXX.XXX.XXX out Accounting cleared. 00049 22 15615 count ip from any to any 00050 22 15615 divert 8668 ip from any to any via ed1 00051 22 15615 count ip from any to any 00100 0 0 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 10000 10 15000 pipe 10 ip from any to XXX.XXX.XXX.XXX out 65000 12 615 allow ip from any to any 65535 0 0 deny ip from any to any 00049 377 236476 count ip from any to any 00050 302 202257 divert 8668 ip from any to any via ed1 00051 514805 771881388 count ip from any to any 00100 0 0 allow ip from any to any via lo0 00200 0 0 deny ip from any to 127.0.0.0/8 00300 0 0 deny ip from 127.0.0.0/8 to any 10000 514538 771807000 pipe 10 ip from any to XXX.XXX.XXX.XXX out 65000 267 74388 allow ip from any to any 65535 0 0 deny ip from any to any # $ vmstat 3|cut -c55- # During the above faults cpu in sy cs us sy id 258 335 81 0 5 95 259 341 90 0 2 98 258 336 88 1 3 97 258 28460 143 5 46 49 255 56690 109 10 90 0 260 57120 111 9 91 0 264 56505 114 11 89 0 260 57644 111 8 92 0 248 58215 109 9 91 0 271 39266 154 8 63 29 292 359 93 0 4 96 315 387 100 0 4 96 356 419 98 0 5 95 What's going on? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5: 7:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 06A9C37B405 for ; Thu, 27 Dec 2001 05:07:17 -0800 (PST) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id fBRD4aK74644; Thu, 27 Dec 2001 10:04:44 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Thu, 27 Dec 2001 10:04:36 -0300 (ART) From: Fernando Gleiser To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: ipf/IPFilter/ipnat vers ipfw/IPFW/nat In-Reply-To: Message-ID: <20011227095321.H73822-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001, Joe & Fhe Barbish wrote: > I scanned the questions archives and sniped this info. > I would like to know if the views stated are correct. > Any other insight or background info would be great. > > Does the ipf port install as userland or kernel & how to force kernel? The firewall/nat code itself is kernel code. The utilities are user space > Is there a package install for ipf or ipnat? No. They are part of the base system. > Where would I find the ipf and ipnat ports? They already are in the system. > Where can I find info on ipnat? the ipnat man pages: man 1 ipnat # the ipnat(1) utility man 5 ipnat # the ipnat.conf file format man 4 ipnat # the ipnat API The ipf howto: http://www.obfuscation.org/ipf/ The ipf mailing list archives: http://false.net/ipfilter And the ipf FAQ http://home.earthlink.net/~jaymzh666/IPF-FAQ/IPFtoc.html > What is the difference between nat and ipnat if both run in user land? > Does IPFilter have a built in nat function? natd runs in userspace. ipnat runs in kernel space. Hope this helps Fer > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:14:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 7384137B416 for ; Thu, 27 Dec 2001 05:14:29 -0800 (PST) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id fBRDBdK74727; Thu, 27 Dec 2001 10:11:44 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Thu, 27 Dec 2001 10:11:39 -0300 (ART) From: Fernando Gleiser To: Michael Kreykenbohm Cc: Subject: Re: pre-built firewall kernel In-Reply-To: <000801c18e5e$f60e8020$5d56b742@bc.hsia.telus.net> Message-ID: <20011227100513.F73822-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 26 Dec 2001, Michael Kreykenbohm wrote: > Everythings looks great with the little system I setup, until I realized > that the kernel does not have the firewall flags compiled into it. > Since I do not have the disk space for all the tools to compile etc, I > was wondering if one of the distributions was already compliled > as a firewall, all I seem to need is a kernel itself with the generic items. You don't need to have the firewall compiled in your kernel. FreeBSD installs both firewalls (IP Filter and ipfw) as modules in the default install. If you want to use ipfw: kldload ipfw or if you prefer ip filter kldload ipl you can add 'ipl_load="YES"' or ipfw_load='"YES"' to /boot/loader.conf to load them automatically at boot time. Fer > > Appreciate any help. > Thanks in advance. > _______________________ > Michael Kreykenbohm > W. Kreykenbohm Corp > 18788 96th Ave Surrey B.C. > 604-888-4114 > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:16: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web10103.mail.yahoo.com (web10103.mail.yahoo.com [216.136.130.53]) by hub.freebsd.org (Postfix) with SMTP id C648F37B405 for ; Thu, 27 Dec 2001 05:15:59 -0800 (PST) Message-ID: <20011227131559.14736.qmail@web10103.mail.yahoo.com> Received: from [213.29.102.17] by web10103.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 05:15:59 PST Date: Thu, 27 Dec 2001 05:15:59 -0800 (PST) From: soheil hyeganeh Subject: make world To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:18: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web10105.mail.yahoo.com (web10105.mail.yahoo.com [216.136.130.55]) by hub.freebsd.org (Postfix) with SMTP id B8DAD37B405 for ; Thu, 27 Dec 2001 05:18:01 -0800 (PST) Message-ID: <20011227131801.26390.qmail@web10105.mail.yahoo.com> Received: from [213.29.102.17] by web10105.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 05:18:01 PST Date: Thu, 27 Dec 2001 05:18:01 -0800 (PST) From: soheil hyeganeh Subject: i add change ip_output.c source code and add the lib/libz/compress.c to kernel i must make buildworld for buildkernel or not? To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi i add the libz/compress.c to kernel files i want to know if i have to make buildworld for builkernel or no?> thanx __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:33:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from raider.crimea-ua.com (raider.strace.net [212.35.167.105]) by hub.freebsd.org (Postfix) with SMTP id B4A0A37B405 for ; Thu, 27 Dec 2001 05:33:32 -0800 (PST) Received: (qmail 56304 invoked from network); 27 Dec 2001 13:37:29 -0000 Received: from unknown (HELO darkstar) (192.168.7.5) by 192.168.7.1 with SMTP; 27 Dec 2001 13:37:29 -0000 Date: Thu, 27 Dec 2001 15:32:14 +0200 From: Loki X-Mailer: The Bat! (v1.53d) UNREG / CD5BF9353B3B7091 Reply-To: Loki X-Priority: 3 (Normal) Message-ID: <902288791.20011227153214@raider.strace.net> To: freebsd-questions@freebsd.org Subject: 2 wavelan in FreeBSD ? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello! Do anything use 2 orinoco wavelan in 1 PC? When I insert second wavelan, I get a message: " No free configuration" my pccard.conf: card "Lucent Technologies" "WaveLAN/IEEE" config 0x1 "wi" ? insert /etc/pccard_ether $device start insert wicontrol -i $device -p 3 remove /etc/pccard_ether $device stop -- Best regards, Loki To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:41:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp013.mail.yahoo.com (smtp013.mail.yahoo.com [216.136.173.57]) by hub.freebsd.org (Postfix) with SMTP id C156137B416 for ; Thu, 27 Dec 2001 05:41:05 -0800 (PST) Received: from shiva-dhcp-126.dial.upmc.edu (HELO ALBINI) (128.147.34.126) by smtp.mail.vip.sc5.yahoo.com with SMTP; 27 Dec 2001 13:41:04 -0000 Date: Thu, 27 Dec 2001 08:39:31 -0500 From: Rod Person To: "Anthony Atkielski" Cc: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-Id: <20011227083931.6c291f2c.roddierod@yahoo.com> In-Reply-To: <005901c18e9e$9edcc510$0a00000a@atkielski.com> References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> Organization: Open Source Beef X-Mailer: Sylpheed version 0.6.1 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It was Thu, 27 Dec 2001 07:20:46 +0100 when I read this: > The real answer, like it or not, is to keep your mother and sister on > Windows. Just because you may prefer FreeBSD doesn't mean that everyone > around you has to prefer it as well. WHY? > ----- Original Message ----- > From: "Tom Parquette" > To: > Cc: > Sent: Thursday, December 27, 2001 01:44 > Subject: Re: Teaching parents UNIX > > > > I think we have a trend here... > > I agree with the suggestions from the other folks. > > > > I'd take the suggestions one step further. Install fvwm95. I had it > running on a test system and it was close enough to window$ that I could > work with it without RTFM first. > > > > If security on your machine is not an issue, I'd accept the other > suggestion and set up a passwordless account, and the scripting, to > bring up > fvwm95 without them having to do anything. > > > > FWIW, When my wife first tried to learn to use a PC it was DOS and no > GUI. > I don't know who was more frustrated, her or me!! But, she picked up > the > window$ "GUI" fairly quickly on her own. > > > > Cheers... > > BTW, I survived teaching my wife. Even if I do end up acting like a > captive Help Desk. ;-) > > -----Original Message----- > > From: Johann Sharizan > > To: freebsd-questions@freebsd.org > > Date: Wed, 26 Dec 2001 22:52:49 +0100 > > Subject: Teaching parents UNIX > > > > Hai hai! > > > > My mother and sister hardly knows how to navigate through Windows :-) > > > > What is the best way of flash-teaching them how the most basic of > basic > things > > are done FreeBSD? I'm not fit for hours explaining. And this is the > only > system > > I have available to her. > > > > I havn't really found anything she might comprehend on freebsd.org, > nor on > any of > > its links. If I'm missing something here, please enlighten me =) > > > > Regards, > > Johann > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > Try not. Do or do not. There is no try. -- Yoda > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message roddierod@yahoo.com "I'm a character in a world gone wrong!" - Entombed - Returning to Madness _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 5:57:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id 2AD1F37B419 for ; Thu, 27 Dec 2001 05:57:38 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16Jb2O-000496-00 for questions@freebsd.org; Thu, 27 Dec 2001 13:57:36 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16Jb16-0002fl-00 for questions@FreeBSD.org; Thu, 27 Dec 2001 13:56:16 +0000 Date: Thu, 27 Dec 2001 13:56:16 +0000 From: Ceri To: questions@FreeBSD.org Subject: Video card support question Message-ID: <20011227135616.GA10078@rhadamanth> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I've currently got a Voodoo 5 PCI card and, since I seem to have some cash to burn after Christmas, am going to buy a new card for my main system and move the Voodoo 5 into the old Pii system. Dilemma starts here : Do either of these cards have support in XFree86-4 ? 1) Hercules 3D Prophet 4500 Kyro 2. Preferred option since my hardware guru says it's better. Also, I'm sure there are problems with support for the : 2) Nvidia GeForce 2 MX-400 64MB AGP hence, the FreeBSD Nvidia project. Does anyone know for sure if either of these will work ? And if they both do, which one kicks most ass (obviously, I intend to use this for Windows games as well). Thanks, Ceri -- keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 6:13: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dltimothy.net (mail.dobox.com [65.88.244.102]) by hub.freebsd.org (Postfix) with ESMTP id 0B61E37B417 for ; Thu, 27 Dec 2001 06:12:58 -0800 (PST) Received: from dlt by dltimothy.net with local (Exim 3.33 #1) id 16JbGy-0000Ab-00 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 07:12:40 -0700 Date: Thu, 27 Dec 2001 07:12:40 -0700 From: Denver Timothy To: freebsd-questions@freebsd.org Subject: Archos USB CD-R Message-ID: <20011227071239.A455@dltimothy.net> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I updated my sources to RELENG_4 and built and installed a new kernel last night. I thought I would try my Archos USB/PCMCIA CD-R because I was told that there was now support for ATAPI over USB since 4.4 release. It seems to work "more" than it did before the new kernel. /var/log/messages: Dec 27 06:03:17 neo /kernel: umass0: In-System Design USB Storage Adapter, rev 1.10/1.00, addr 2 Dec 27 06:03:20 neo /kernel: umass0: Phase Error, residue = 0 Dec 27 06:03:31 neo last message repeated 4 times Dec 27 06:10:09 neo /kernel: umass0: at uhub0 port 1 (addr 2) disconnected Dec 27 06:10:09 neo /kernel: umass0: detached my kernel config: dlt@neo$ diff GENERIC NEO 18c18 < # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.37 2001/12/19 18:34:45 iedowse Exp $ --- > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.34 2001/08/12 13:13:46 joerg Exp $ 25c25 < ident GENERIC --- > ident NEO 27a28,29 > options USER_LDT #allow user-level control of i386 ldt > 150c152,153 < device apm0 at nexus? disable flags 0x20 # Advanced Power Management --- > #device apm0 at nexus? disable flags 0x20 # Advanced Power Management > device apm0 at nexus? flags 0x20 # Advanced Power Management 251a255,259 > > # Sound support > device pcm > > pseudo-device speaker Any thoughts? -------------------------------------------------------------------- Denver Timothy \|/ "Your mouse has moved, @ @ please restart Windows for the changes to take effect." -oOO-(_)-OOo-------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 6:18:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from avocet.prod.itd.earthlink.net (avocet.mail.pas.earthlink.net [207.217.120.50]) by hub.freebsd.org (Postfix) with ESMTP id 1FF5A37B405 for ; Thu, 27 Dec 2001 06:18:14 -0800 (PST) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flconsulting.com) by avocet.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16JbMK-0003QX-00 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 06:18:13 -0800 Received: (from mlevy@localhost) by ns.flconsulting.com (8.11.6/8.11.6) id fBRDGR400852 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 08:16:27 -0500 (EST) Date: Thu, 27 Dec 2001 08:16:25 -0500 From: Bara Zani To: freebsd-questions@freebsd.org Subject: freebsd as an internet gaetway - some questions . Message-ID: <20011227081624.A541@weebo.flconsulting.com> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi to all , I have a friend who needs to setup a small home-office network . I answered most of his questions but wanted your opinion / experience /views . The hardware is a P166 with 32mb ram and plenty of disk space . the internet link is dsl . he will have three clients in the office and two laptops in field . here's the parts i'm not sure of : 1. will a p166 with 32 mb ram running freebsd will be strong enough to be a gateway ( i think yes but i wonder what your thaughts are ) . 2.assuming the laptop users have windows 2000 , can they use pptp to "vpn" to the office through the freebsd box ? thanks and happy new year to all , barazani To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 6:22:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.microbsd.net (mail.microbsd.net [4.23.122.30]) by hub.freebsd.org (Postfix) with ESMTP id 81A9C37B426 for ; Thu, 27 Dec 2001 06:22:18 -0800 (PST) Received: from 127.0.0.1 (localhost.microbsd.net [127.0.0.1]) by mail.microbsd.net (Postfix) with SMTP id 8F71C1F15; Thu, 27 Dec 2001 09:19:14 -0500 (EST) Received: from vpan.netwolves.com (unknown [65.162.182.40]) by mail.microbsd.net (Postfix) with ESMTP id E03801F11; Thu, 27 Dec 2001 09:19:13 -0500 (EST) Subject: Re: freebsd as an internet gaetway - some questions . From: OutBack Dingo To: Bara Zani Cc: freebsd-questions@freebsd.org In-Reply-To: <20011227081624.A541@weebo.flconsulting.com> References: <20011227081624.A541@weebo.flconsulting.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0 (Preview Release) Date: 27 Dec 2001 10:21:19 -0500 Message-Id: <1009466480.89398.0.camel@vpan.netwolves.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a 386/66 with 64Mgs handling a T1 running openbsd as my router/firewall gateway, yes its a router also! and yes users can pptp to a *BSD box from windows! > 1. will a p166 with 32 mb ram running freebsd will be strong enough to be a gateway ( i think yes but > i wonder what your thaughts are ) . > > 2.assuming the laptop users have windows 2000 , can they use pptp to "vpn" to the office through the freebsd box ? > > thanks and happy new year to all , > barazani > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 6:36: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lion.com.ua (lion.com.ua [213.133.161.130]) by hub.freebsd.org (Postfix) with ESMTP id D00AE37B41A for ; Thu, 27 Dec 2001 06:35:40 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by lion.com.ua (8.11.6/8.11.6) with ESMTP id fBREZD180956 for ; Thu, 27 Dec 2001 16:35:19 +0200 (EET) (envelope-from sa@simon.org.ua) Date: Thu, 27 Dec 2001 16:35:13 +0200 (EET) From: Andrey Simonenko X-X-Sender: sa@lion.com.ua To: freebsd-questions@freebsd.org Subject: Error from SCSI hard disk, please explaine Message-ID: <20011227162838.S80845-100000@lion.com.ua> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, My system (FreeBSD/i386 4.4-STABLE) begins to print following: Dec 26 02:05:33 lion /kernel: (da0:sym0:0:15:0): READ(06). CDB: 8 1b 60 7f 10 0 Dec 26 02:05:35 lion /kernel: (da0:sym0:0:15:0): MEDIUM ERROR info:1b607f asc:11,1 Dec 26 02:05:36 lion /kernel: (da0:sym0:0:15:0): Read retries exhausted sks:80,3f Dec 26 02:05:38 lion /kernel: (da0:sym0:0:15:0): READ(06). CDB: 8 1b 60 7f 10 0 Dec 26 02:05:38 lion /kernel: (da0:sym0:0:15:0): MEDIUM ERROR info:1b607f asc:11,1 Dec 26 02:05:38 lion /kernel: (da0:sym0:0:15:0): Read retries exhausted sks:80,3f Dec 26 02:05:42 lion /kernel: (da0:sym0:0:15:0): READ(06). CDB: 8 1d 60 8f 10 0 Dec 26 02:05:45 lion /kernel: (da0:sym0:0:15:0): MEDIUM ERROR info:1d608f asc:11,1 Can somebody explaine me what does it mean. Here is some strings from /var/log/message: Dec 9 13:27:00 lion /kernel: sym0: <875> port 0x1400-0x14ff mem 0xfa200000-0xfa200fff,0xfa203000-0xfa2030ff irq 11 at device 13.0 on pci0 Dec 9 13:27:00 lion /kernel: sym0: No NVRAM, ID 7, Fast-20, SE, parity checking Dec 9 13:27:00 lion /kernel: sym1: <875> port 0x1800-0x18ff mem 0xfa201000-0xfa201fff,0xfa203400-0xfa2034ff irq 10 at device 13.1 on pci0 Dec 9 13:27:00 lion /kernel: sym1: No NVRAM, ID 7, Fast-20, SE, parity checking Dec 9 13:27:01 lion /kernel: da0 at sym0 bus 0 target 15 lun 0 Dec 9 13:27:01 lion /kernel: da0: Fixed Direct Access SCSI-4 device Dec 9 13:27:01 lion /kernel: da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled Dec 9 13:27:01 lion /kernel: da0: 8715MB (17850264 512 byte sectors: 255H 63S/T 1111C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 6:51:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout07.sul.t-online.com (mailout07.sul.t-online.com [194.25.134.83]) by hub.freebsd.org (Postfix) with ESMTP id A3FDB37B417 for ; Thu, 27 Dec 2001 06:51:13 -0800 (PST) Received: from fwd08.sul.t-online.de by mailout07.sul.t-online.de with smtp id 16Jbrn-0006vx-05; Thu, 27 Dec 2001 15:50:43 +0100 Received: from T-Online.DE (520042712742-0001@[80.133.143.191]) by fwd08.sul.t-online.com with esmtp id 16Jbrm-09XUCOC; Thu, 27 Dec 2001 15:50:42 +0100 Message-ID: <3C2B35A8.2FF639CF@T-Online.DE> Date: Thu, 27 Dec 2001 15:52:24 +0100 From: morten.gulbrandsen@t-online.de (Morten Gulbrandsen) X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: startx crashes FreeBSD 4.2 References: <3C2A8B9B.D509315C@T-Online.DE> <20011227140005.B1000@k7.mavetju.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Sender: 520042712742-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thank for the gently advice. This is a statement what I should have done, I hereby apologize for not asking before I started to install. I will newer ever attempt to install everything, without proper investigation. What can I do now ? cd /usr/ports/x11/ make deinstall ? cd /usr/ports/x11/XFree85-4/ make install ? my problem is still that I cannot start the x server. What really is XFree85-4 ? I'm looking for a general purpose desktop solution, I have read recommendations about, FreeBSD 4.4-Release XFree86 3.3.6 KDE 2.2 or higher. I want no linux emulations, and I want to get as close as possible to real unix. I wanted to install some tools for viewing PostScript files. And for converting between PostScript and portable Document format. It was istalled , but it didn't work . Yours Sincerely Morten Gulbrandsen Edwin Groothuis wrote: > > On Thu, Dec 27, 2001 at 03:46:51AM +0100, Morten Gulbrandsen wrote: > > Hello, my problem is: > > startx gives fatal server error. > > You should install only the port you're looking for, not everybody > in the x11-category: > > cd /usr/ports/x11/XFree85-4 > make install > > After you've installed it, run xf86config (or xf86cfg, I'm never > sure which one) and go on with the configuration stuff. > > Edwin > > -- > Edwin Groothuis | Personal website: http://www.MavEtJu.org > edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: > ------------------+ http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 7: 4:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id BB00C37B417 for ; Thu, 27 Dec 2001 07:04:32 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBRF4Vf31590; Thu, 27 Dec 2001 16:04:31 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122716025979:3315 ; Thu, 27 Dec 2001 16:02:59 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBRFDGe03250; Thu, 27 Dec 2001 16:13:16 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Thu, 27 Dec 2001 16:13:15 +0100 From: Roman Neuhauser To: "Thomas D'Amico" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How do I acquire your entire freebsd downloads? Message-ID: <20011227161315.E476@roman.mobil.cz> Mail-Followup-To: Thomas D'Amico , freebsd-questions@FreeBSD.ORG References: <20011227015421.64132.qmail@web9204.mail.yahoo.com> Mime-Version: 1.0 In-Reply-To: <20011227015421.64132.qmail@web9204.mail.yahoo.com> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/27/2001 04:02:59 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/27/2001 04:03:05 PM, Serialize complete at 12/27/2001 04:03:05 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Wed, 26 Dec 2001 17:54:21 -0800 (PST) > From: Thomas D'Amico > Subject: How do I acquire your entire freebsd downloads? > To: freebsd-questions@FreeBSD.ORG > > I wish to download off the internet all your free > software, drivers, etc. I'll be happy to contribute to > your great program. Please advise and guide me, I > don't see any free downloads on your site, only > retailers selling them (CD's)! Please Help. Thanks, Tom. How about this guide: http://www.freebsd.org/ -> Getting FreeBSD -> FTP Sites -> choose a mirror -> ISO-IMAGES-i386 -> there you go? -- FreeBSD 4.4-STABLE 4:09PM up 1 day, 2:47, 7 users, load averages: 0.01, 0.00, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 7:21: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 8B3C137B416 for ; Thu, 27 Dec 2001 07:20:57 -0800 (PST) Received: (qmail 388 invoked from network); 27 Dec 2001 15:20:56 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 27 Dec 2001 15:20:56 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: startx crashes FreeBSD 4.2 X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Thu, 27 Dec 2001 09:20:56 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: startx crashes FreeBSD 4.2 Thread-Index: AcGO5idAtNEZ385ATKe4RabT0+KnmwAAmSYw From: "Robert D. Hughes" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG As far as XFree85-4, I have no idea. I've never seen that port anywhere. XFree on FreeBSD is available in two flavors: 3.3.6 (default, installed from distribution) and 4.x.x from the ports. If the KDE version in the ports tree isn't recent enough for you, just download the source, read the docs, ./configure && make && make install && enjoy. Now, as for "real unix", you have System IV/V and BSD style systems. They are not the same. Both are equally "real unix". Learning one does not make you proficient in the other. Open- and FreeBSD are both BSD (Berkley) based systems. Linux, UX, and Solaris are examples of SYSV style systems. Which do you want to learn? -----Original Message----- From: Morten Gulbrandsen [mailto:morten.gulbrandsen@t-online.de] Sent: Thursday, December 27, 2001 8:52 AM Cc: freebsd-questions@FreeBSD.ORG Subject: Re: startx crashes FreeBSD 4.2 Thank for the gently advice. This is a statement what I should have done,=20 I hereby apologize for not asking before=20 I started to install. I will newer ever=20 attempt to install everything, without proper investigation. What can I do now ? cd /usr/ports/x11/ make deinstall ? cd /usr/ports/x11/XFree85-4/ make install ? my problem is still that I cannot start the x server. What really is XFree85-4 ? I'm looking for a general purpose desktop solution, I have read recommendations about,=20 FreeBSD 4.4-Release XFree86 3.3.6 KDE 2.2 or higher. I want no linux emulations, and I want to get as close as possible=20 to real unix. I wanted to install some tools for viewing PostScript files. And for converting between PostScript and portable Document format. It was istalled , but it didn't work .=20 Yours Sincerely Morten Gulbrandsen Edwin Groothuis wrote: >=20 > On Thu, Dec 27, 2001 at 03:46:51AM +0100, Morten Gulbrandsen wrote: > > Hello, my problem is: > > startx gives fatal server error. >=20 > You should install only the port you're looking for, not everybody > in the x11-category: >=20 > cd /usr/ports/x11/XFree85-4 > make install >=20 > After you've installed it, run xf86config (or xf86cfg, I'm never > sure which one) and go on with the configuration stuff. >=20 > Edwin >=20 > -- > Edwin Groothuis | Personal website: http://www.MavEtJu.org > edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: > ------------------+ http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 7:34:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166]) by hub.freebsd.org (Postfix) with ESMTP id 6732837B41C for ; Thu, 27 Dec 2001 07:34:31 -0800 (PST) Received: from rac4.wam.umd.edu (IDENT:root@rac4.wam.umd.edu [128.8.10.144]) by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA26653; Thu, 27 Dec 2001 10:34:28 -0500 (EST) Received: from rac4.wam.umd.edu (IDENT:sendmail@localhost [127.0.0.1]) by rac4.wam.umd.edu (8.9.3/8.9.3) with SMTP id KAA20867; Thu, 27 Dec 2001 10:34:27 -0500 (EST) Received: from localhost (culverk@localhost) by rac4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA20863; Thu, 27 Dec 2001 10:34:27 -0500 (EST) X-Authentication-Warning: rac4.wam.umd.edu: culverk owned process doing -bs Date: Thu, 27 Dec 2001 10:34:27 -0500 (EST) From: Kenneth Wayne Culver To: Ceri Cc: questions@FreeBSD.ORG Subject: Re: Video card support question In-Reply-To: <20011227135616.GA10078@rhadamanth> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Hi all, > > I've currently got a Voodoo 5 PCI card and, since I seem to have some > cash to burn after Christmas, am going to buy a new card for my main > system and move the Voodoo 5 into the old Pii system. > > Dilemma starts here : > > Do either of these cards have support in XFree86-4 ? > > 1) Hercules 3D Prophet 4500 Kyro 2. > > Preferred option since my hardware guru says it's better. > Also, I'm sure there are problems with support for the : > > 2) Nvidia GeForce 2 MX-400 64MB AGP > > hence, the FreeBSD Nvidia project. > > Does anyone know for sure if either of these will work ? > And if they both do, which one kicks most ass (obviously, I intend to > use this for Windows games as well). I'd suggest the Nvidia card. It has full 2d support in FreeBSD, and after the new year, I have word that nvidia will be compiling a native version of their GL libs for FreeBSD, (the 2d portion of the nvidia driver already works). After FreeBSD gets 3d (GL) support from Nvidia, several linux games will work such as QIII, Tribes 2, etc... as well as several other 3d games that are windows only (under wine). Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 7:54:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from operamail.com (operamail.infinite.com [199.29.68.126]) by hub.freebsd.org (Postfix) with ESMTP id E7FE437B416 for ; Thu, 27 Dec 2001 07:54:30 -0800 (PST) X-WM-Posted-At: operamail.com; Thu, 27 Dec 01 10:52:57 -0500 X-WebMail-UserID: Jud Date: Thu, 27 Dec 2001 10:52:57 -0500 From: Jud To: Ceri , questions X-EXP32-SerialNo: 00000000 Subject: RE: Video card support question Message-ID: <3C2B8AEC@operamail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: InterChange (Hydra) SMTP v3.62 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >===== Original Message From Ceri ===== >Hi all, > >I've currently got a Voodoo 5 PCI card and, since I seem to have some >cash to burn after Christmas, am going to buy a new card for my main >system and move the Voodoo 5 into the old Pii system. > >Dilemma starts here : > >Do either of these cards have support in XFree86-4 ? > >1) Hercules 3D Prophet 4500 Kyro 2. > > Preferred option since my hardware guru says it's better. > Also, I'm sure there are problems with support for the : > >2) Nvidia GeForce 2 MX-400 64MB AGP > > hence, the FreeBSD Nvidia project. > >Does anyone know for sure if either of these will work ? >And if they both do, which one kicks most ass (obviously, I intend to >use this for Windows games as well). > >Thanks, > >Ceri I could never get the Kyro II to work, even on Windows with video from its own demo disk. As you can imagine, I didn't bother trying it on FreeBSD. I don't know whether it's changed, but when I went to the Hercules site's forums they were full of posts from users who couldn't get their Kyro II cards to work and tech support replies that changes to multiple BIOS settings were needed. I tried all the tips, but there are so many potential combinations of settings.... After a week of fruitless attempts, I gave up and returned it in exchange for a GeForce2 MX400 64MB AGP, which has worked without a hitch for me in both Windows and FreeBSD. (When you're setting up XFree86, it's the nv driver.) Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 8: 7:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout11.sul.t-online.com (mailout11.sul.t-online.com [194.25.134.85]) by hub.freebsd.org (Postfix) with ESMTP id 8DE9F37B416 for ; Thu, 27 Dec 2001 08:07:19 -0800 (PST) Received: from fwd03.sul.t-online.de by mailout11.sul.t-online.de with smtp id 16Jd3u-00025H-02; Thu, 27 Dec 2001 17:07:18 +0100 Received: from T-Online.DE (520042712742-0001@[80.133.155.53]) by fwd03.sul.t-online.com with esmtp id 16Jd3e-0QvgxsC; Thu, 27 Dec 2001 17:07:02 +0100 Message-ID: <3C2B478C.B34DACA8@T-Online.DE> Date: Thu, 27 Dec 2001 17:08:44 +0100 From: morten.gulbrandsen@t-online.de (Morten Gulbrandsen) X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-questions@FreeBSD.ORG Subject: Re: startx crashes FreeBSD 4.2 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Sender: 520042712742-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "Robert D. Hughes" wrote: > > As far as XFree85-4, I have no idea. I've never seen that port anywhere. > XFree on FreeBSD is available in two flavors: 3.3.6 (default, installed > from distribution) and 4.x.x from the ports. If the KDE version in the > ports tree isn't recent enough for you, just download the source, read > the docs, ./configure && make && make install && enjoy. This is interesting, You know I have a problem with startx ? after re-boot bash-2.04$ startx& [1] 526 bash-2.04$ Fatal server error: Cannot open log file "/var/log/XFree86.0.log" When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. uname -a FreeBSD earth.. 4.2-RELEASE FreeBSD 4.2-RELEASE #7: Wed Dec 19 18:49:23 GMT 2001 morten@earth..:/usr/src/sys/compile/earth i386 Do I need to solve this before I "just download the source, read > the docs, ./configure && make && make install && enjoy." Do I need to download it to a spesific /usr/ports/ directory ? > > Now, as for "real unix", you have System IV/V and BSD style systems. > They are not the same. Both are equally "real unix". Learning one does > not make you proficient in the other. Open- and FreeBSD are both BSD > (Berkley) based systems. Linux, UX, and Solaris are examples of SYSV > style systems. Which do you want to learn? BSD please. Yours Sincerely Morten Gulbrandsen > > -----Original Message----- > From: Morten Gulbrandsen [mailto:morten.gulbrandsen@t-online.de] > Sent: Thursday, December 27, 2001 8:52 AM > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: startx crashes FreeBSD 4.2 > > Thank for the gently advice. > > This is a statement what I should have done, > I hereby apologize for not asking before > I started to install. I will newer ever > attempt to install everything, without proper investigation. > > What can I do now ? > cd /usr/ports/x11/ > make deinstall ? > cd /usr/ports/x11/XFree85-4/ > make install ? > > my problem is still that I cannot start the x server. > What really is XFree85-4 ? > > I'm looking for a general purpose desktop solution, > I have read recommendations about, > FreeBSD 4.4-Release > XFree86 3.3.6 > KDE 2.2 or higher. > > I want no linux emulations, and I want to get as close as possible > to real unix. I wanted to install some tools for viewing PostScript > files. > And for converting between PostScript and portable Document format. > > It was istalled , but it didn't work . > > Yours Sincerely > > Morten Gulbrandsen > > Edwin Groothuis wrote: > > > > On Thu, Dec 27, 2001 at 03:46:51AM +0100, Morten Gulbrandsen wrote: > > > Hello, my problem is: > > > startx gives fatal server error. > > > > You should install only the port you're looking for, not everybody > > in the x11-category: > > > > cd /usr/ports/x11/XFree85-4 > > make install > > > > After you've installed it, run xf86config (or xf86cfg, I'm never > > sure which one) and go on with the configuration stuff. > > > > Edwin > > > > -- > > Edwin Groothuis | Personal website: > http://www.MavEtJu.org > > edwin@mavetju.org | Interested in MUDs? Visit Fatal > Dimensions: > > ------------------+ > http://www.FatalDimensions.org/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 8:24:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from operamail.com (operamail.infinite.com [199.29.68.126]) by hub.freebsd.org (Postfix) with ESMTP id 91B4637B416 for ; Thu, 27 Dec 2001 08:24:16 -0800 (PST) X-WM-Posted-At: operamail.com; Thu, 27 Dec 01 11:24:15 -0500 X-WebMail-UserID: Jud Date: Thu, 27 Dec 2001 11:24:14 -0500 From: Jud To: morten.gulbrandsen@t-online.de (Morten Gulbrandsen) Cc: freebsd-questions X-EXP32-SerialNo: 00000000 Subject: RE: startx crashes FreeBSD 4.2 Message-ID: <3C31E2D5@operamail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: InterChange (Hydra) SMTP v3.62 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >===== Original Message From morten.gulbrandsen@t-online.de (Morten Gulbrandsen) ===== [snip] >after re-boot >bash-2.04$ startx& >[1] 526 >bash-2.04$ >Fatal server error: >Cannot open log file "/var/log/XFree86.0.log" >When reporting a problem related to a server crash, please send >the full server output, not just the last messages. >This can be found in the log file "/var/log/XFree86.0.log". >giving up. >xinit: No such file or directory (errno 2): unable to connect to X >server >xinit: No such process (errno 3): Server error. > >uname -a >FreeBSD earth.. 4.2-RELEASE FreeBSD 4.2-RELEASE #7: Wed Dec 19 18:49:23 >GMT 2001 morten@earth..:/usr/src/sys/compile/earth i386 > >Do I need to solve this before I "just download the source, read >> the docs, ./configure && make && make install && enjoy." > >Do I need to download it to a spesific /usr/ports/ directory ? [snip] >> I'm looking for a general purpose desktop solution, >> I have read recommendations about, >> FreeBSD 4.4-Release >> XFree86 3.3.6 >> KDE 2.2 or higher. >> >> I want no linux emulations, and I want to get as close as possible >> to real unix. I wanted to install some tools for viewing PostScript >> files. >> And for converting between PostScript and portable Document format. >> >> It was istalled , but it didn't work . >> >> Yours Sincerely >> >> Morten Gulbrandsen [snip] Morten: Do you have data of your own installed on this machine, or have you just tried to install FreeBSD? Also, what hardware do you have, particularly your video card? If you don't have any data of your own installed, the best thing is probably just to fdisk and start over. What to do about XFree86 if/when you start over depends on your hardware. Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 8:29:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id 2317437B41C for ; Thu, 27 Dec 2001 08:29:07 -0800 (PST) Received: from phreaker.net (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id 33ED93011A for ; Thu, 27 Dec 2001 16:29:05 +0000 (UTC) Received: from randy.ies.net (isdnppp-143.vestfold.net [217.65.226.143]) by zagnut.hotpop.com (Postfix) with ESMTP id 82D5B5001D for ; Thu, 27 Dec 2001 16:29:04 +0000 (UTC) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Thu, 27 Dec 2001 17:34:45 +0100 (CET) Reply-To: webdude@phreaker.net, ies@runbox.no Organization: Private From: webdude@phreaker.net To: freebsd-questions@freebsd.org Subject: Getting fetchmail to download headers only X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Happy holidays, everyone! Does anybody know how I can get fetchmail to download only the headers of any new mail on my POP account? Read the fetchmail FAQ, found nothing... -- best regards, Inge Eidsæther Syvertsen webdude@phreaker.net *** If an electronic circuit cannot fail, it will. (Murphys Law) *** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 8:29:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id 123BD37B41B for ; Thu, 27 Dec 2001 08:29:40 -0800 (PST) Received: from phreaker.net (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id DA81333569 for ; Thu, 27 Dec 2001 16:29:39 +0000 (UTC) Received: from randy.ies.net (isdnppp-143.vestfold.net [217.65.226.143]) by zagnut.hotpop.com (Postfix) with ESMTP id B9AEB5001D for ; Thu, 27 Dec 2001 16:29:39 +0000 (UTC) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Thu, 27 Dec 2001 17:35:20 +0100 (CET) Reply-To: webdude@phreaker.net, ies@runbox.no Organization: Private From: webdude@phreaker.net To: freebsd-questions@freebsd.org Subject: PCMCIA on FreeBSD 4.4 Stable X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi again I'm looking for a reliable PCMCIA 10/100 16bit NIC for my laptop, running FreeBSD 4.4 Stable. Read through HARDWARE.TXT and found several, but after some more research, read about configuration problems with many. Can somebody recommend a working, reasonably priced card that won't require source code tweaking or give me headaches for days on end before I get it to work? Many thanks for any suggestions! -- best regards, Inge Eidsæther Syvertsen webdude@phreaker.net *** If an electronic circuit cannot fail, it will. (Murphys Law) *** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 8:32:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id 6B16837B41A for ; Thu, 27 Dec 2001 08:32:25 -0800 (PST) Received: from fac13.ds.psu.edu (localhost.ds.psu.edu [127.0.0.1]) by fac13.ds.psu.edu (8.11.6/8.11.3) with ESMTP id fBRGVhG06312; Thu, 27 Dec 2001 11:31:44 -0500 (EST) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200112271631.fBRGVhG06312@fac13.ds.psu.edu> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: "H. Wade Minter" Cc: questions@FreeBSD.ORG Subject: Re: USB camera with 4-STABLE In-Reply-To: Your message of "Sat, 22 Dec 2001 09:57:19 EST." <20011222095537.W27252-100000@bunning.skiltech.com> From: dochawk@psu.edu Date: Thu, 27 Dec 2001 11:31:43 -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Wade wondered, > I'm trying to use the USB connection on my Nikon "CoolPix 775" camera with > my FreeBSD machine. usbd is running. When I plug the camera's USB > connection in, I get: > > Dec 22 09:45:28 kenbridge /kernel: umass0: NIKON NIKON DSC E775, rev > [repeat] > > Does anyone know if USB connections to digital cameras are supported in > FreeBSD? checkout gphoto. gphoto2 supports a lot of cameras. www.gphoto.org, iirc. I don't believe there's a port, as it's very alpha or pre-alpha at the moment, but I compiled it from source and it works. hawk -- What part of "non-negotiable" didn't you understand? /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings. Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 9:44:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from domain.com (44.mujb.dlls.dllstxbk.dsl.att.net [12.98.249.44]) by hub.freebsd.org (Postfix) with SMTP id D399637B41C for ; Thu, 27 Dec 2001 09:44:10 -0800 (PST) Received: (qmail 13542 invoked by alias); 27 Dec 2001 17:42:29 -0000 Received: from unknown (HELO there) (127.0.0.1) by loopback with SMTP; 27 Dec 2001 17:42:29 -0000 Content-Type: text/plain; charset="iso-8859-1" From: Jason Halbert Reply-To: jason@jason-n3xt.org To: questions@freebsd.org Subject: Moving MySQL Databases Date: Thu, 27 Dec 2001 17:42:29 +0000 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011227174410.D399637B41C@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does anyone know how to move MySQL databases from one box to another? I am upgrading my server and I would like to move my Qmail and Apache databases over. It would be a nightmare to have to recreate them from scratch. Thanks for any help. Jason jason@jason-n3xt.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 9:45:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chaos.evolve.za.net (chaos.evolve.za.net [196.34.172.107]) by hub.freebsd.org (Postfix) with ESMTP id E8BB037B623 for ; Thu, 27 Dec 2001 09:45:28 -0800 (PST) Received: from DAVE ([192.168.0.56]) by chaos.evolve.za.net (8.11.6/1.1.3) with SMTP id fBRHjKS06203 for ; Thu, 27 Dec 2001 19:45:22 +0200 (SAST) (envelope-from dave@kill-9.za.net) Message-ID: <00ac01c18efd$d4cf25a0$3800a8c0@DAVE> From: "Dave Raven" To: Subject: Sockstat (Permissions?) Date: Thu, 27 Dec 2001 19:42:15 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, Having some trouble with my sockstat; I get this as an output: [opteq@gateway] ~ # sockstat USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS www httpd 6222 16 ? ? ? www httpd 6222 17 ? ? ? www httpd 6221 16 ? ? ? www httpd 6221 17 ? ? ? www httpd 6219 4 ? ? ? www httpd 6219 16 ? ? ? www httpd 6219 17 ? ? ? www httpd 6217 16 ? ? ? www httpd 6217 17 ? ? ? root sshd 6207 4 ? ? ? ................continues... Why is this; could it be because I am using su? (standard user, group wheel) su to root. I wouldnt think so. I have root access to the rest of the machine. Other Info: [opteq@gateway] ~ # whoami root [opteq@gateway] ~ # uname -mrs FreeBSD 4.5-PRERELEASE i386 Thanks all; Dave OpteqSec. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 9:53:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id A263E37B41A for ; Thu, 27 Dec 2001 09:53:26 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16Jeib-0007mI-00 for questions@freebsd.org; Thu, 27 Dec 2001 17:53:25 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16JePn-000KiC-00 for questions@FreeBSD.org; Thu, 27 Dec 2001 17:33:59 +0000 Date: Thu, 27 Dec 2001 17:33:59 +0000 From: Ceri To: questions@FreeBSD.org Subject: Re: Video card support question Message-ID: <20011227173359.GA79511@rhadamanth> References: <20011227135616.GA10078@rhadamanth> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011227135616.GA10078@rhadamanth> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 01:56:16PM +0000, Ceri wrote: > > Hi all, > > I've currently got a Voodoo 5 PCI card and, since I seem to have some > cash to burn after Christmas, am going to buy a new card for my main > system and move the Voodoo 5 into the old Pii system. > > Dilemma starts here : > > 1) Hercules 3D Prophet 4500 Kyro 2. > > 2) Nvidia GeForce 2 MX-400 64MB AGP Thanks for the replies chaps! Ceri -- keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 9:54: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id 9EAFF37B417 for ; Thu, 27 Dec 2001 09:53:26 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16Jeia-0007mI-00 for questions@freebsd.org; Thu, 27 Dec 2001 17:53:24 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16JeiT-000Kkw-00 for questions@FreeBSD.org; Thu, 27 Dec 2001 17:53:17 +0000 Date: Thu, 27 Dec 2001 17:53:17 +0000 From: Ceri To: questions@FreeBSD.org Subject: [LONG] pcf0: spurious interrupt Message-ID: <20011227175317.GB79511@rhadamanth> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="2fHTh5uZTiUOsy+g" Content-Disposition: inline User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --2fHTh5uZTiUOsy+g Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, I've checked the archives on this, but nothing matches the string ``pcf'' with the string ``spurious interrupt'' that I can find. Yesterday, in an attempt to get either healthd or lmmon working, I added the following lines to my kernel config: device smbus # Bus support, required for smb below. device intpm device alpm device ichsmb device smb device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device pcf0 at isa? port 0x320 irq 5 device bktr Since then, I have been seeing this : Dec 27 15:28:50 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 15:29:01 rhadamanth last message repeated 7630 times Dec 27 17:30:38 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 17:31:09 rhadamanth last message repeated 20408 times Dec 27 17:31:14 rhadamanth last message repeated 3557 times Dec 27 17:31:14 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 17:31:45 rhadamanth last message repeated 21248 times Dec 27 17:32:19 rhadamanth last message repeated 23530 times Dec 27 17:32:19 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 17:32:50 rhadamanth last message repeated 21257 times Dec 27 17:34:51 rhadamanth last message repeated 83374 times Dec 27 17:35:00 rhadamanth last message repeated 6583 times Dec 27 17:35:00 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 17:35:31 rhadamanth last message repeated 20977 times Dec 27 17:37:32 rhadamanth last message repeated 83374 times Dec 27 17:45:00 rhadamanth last message repeated 97714 times Dec 27 17:45:00 rhadamanth /kernel: pcf0: spurious interrupt, status=0xff Dec 27 17:45:31 rhadamanth last message repeated 20781 times This is an SMP Pentium III machine, /var/run/dmesg.boot is attached, but I'm not sure that this is related to the problem. The motherboard is a GA-6VXDC7 with a VIA chipset. I've also attached the output of vmstat -i;sleep 10; vmstat -i and mptable. Can anyone advise what is causing these ? I could just take pcf out of my kernel config again, but then I think I am doomed to never run healthd. Any more information is available on request. Thanks, Ceri -- keep a mild groove on --2fHTh5uZTiUOsy+g Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #3: Wed Dec 26 18:27:46 GMT 2001 root@rhadamanth.private.submonkey.net:/usr/obj/usr/src/sys/RHADAMANTH Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (863.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff real memory = 536805376 (524224K bytes) avail memory = 519208960 (507040K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0339000. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00f7220 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard IOAPIC #0 intpin 19 -> irq 2 IOAPIC #0 intpin 17 -> irq 16 IOAPIC #0 intpin 18 -> irq 17 IOAPIC #0 intpin 16 -> irq 18 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 7.2 irq 2 pci0: at 7.3 irq 2 ichsmb0: at device 7.4 on pci0 device_probe_and_attach: ichsmb0 attach returned 6 pci0: <3Dfx model 0009 graphics accelerator> at 9.0 irq 16 atapci1: port 0xc800-0xc80f,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 mem 0xdbfec000-0xdbfeffff irq 17 at device 10.0 on pci0 ata2: at 0xd800 on atapci1 ata3: at 0xd000 on atapci1 pcm0: port 0xbc00-0xbc3f irq 2 at device 11.0 on pci0 ed0: port 0xc000-0xc01f irq 18 at device 12.0 on pci0 ed0: address 00:40:95:44:3f:bc, type NE2000 (16 bit) dc0: port 0xc400-0xc4ff mem 0xdbfebf00-0xdbfebfff irq 16 at device 13.0 on pci0 dc0: Ethernet address: 00:50:bf:76:2a:98 miibus0: on dc0 dcphy0: on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0:
Hi all, I trying to get the ezmlm port = to work with=20 mailing lists on my freebsd box. Its driving me nuts, I cant see what is = causing=20 this error in my maillogs:
Dec 27 15:22:46 homer qmail: = 1009491766.884071=20 status: local 1/10 remote 0/20
Dec 27 15:22:46 homer qmail: = 1009491766.901693=20 delivery 411: deferral:=20 Unable_to_open_.qmail-amigos:_access_denied._(#4.3.0)/
 
I have set the permissions on all the = affected=20 files every way possible, I created the list under my username (me) for = my=20 domain (domain.com)
ezmlm-make ~/amigos = /var/qmail/alias/.qmail-amigos=20 me-amigos domain.com
 
then subscribed myself
ezmlm-sub ~/amigos me@domain.com
 
lrwx------  1 me =20 qmail     25 Dec 27 12:58 .qmail-amigos@ ->=20 /home/me/amigos/editor
lrwx------  1 me =20 qmail     26 Dec 27 12:58 .qmail-amigos-default@ = ->=20 /home/me/amigos/manager
lrwx------  1 me =20 qmail     24 Dec 27 12:58 .qmail-amigos-owner@ -> = /home/me/amigos/owner
lrwx------  1 me =20 qmail     26 Dec 27 12:58 = .qmail-amigos-return-default@=20 -> /home/me/amigos/bouncer
 
all the files in my dir are owned by = me, and I dont=20 see why it is getting access denied, the .qmail-amigos points to the=20 /home/me/amigos/editor
which I can read as user 'me' without = any=20 problems
 
su-2.05$ less=20 /var/qmail/alias/.qmail-amigos
|/usr/local/bin/ezmlm-reject
|/usr/l= ocal/bin/ezmlm-send=20 '/home/me/amigos'
|/usr/local/bin/ezmlm-warn '/home/me/amigos' || = exit=20 0
 
------=_NextPart_000_01F3_01C18EF0.22703A00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:11:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta07-svc.ntlworld.com (mta07-svc.ntlworld.com [62.253.162.47]) by hub.freebsd.org (Postfix) with ESMTP id 9055B37B417 for ; Thu, 27 Dec 2001 15:11:08 -0800 (PST) Received: from lungfish.ntlworld.com ([62.253.145.181]) by mta07-svc.ntlworld.com (InterMail vM.4.01.03.23 201-229-121-123-20010418) with ESMTP id <20011227231106.DQFB327.mta07-svc.ntlworld.com@lungfish.ntlworld.com>; Thu, 27 Dec 2001 23:11:06 +0000 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.3/8.11.3) with ESMTP id fBRNB4n32327; Thu, 27 Dec 2001 23:11:04 GMT (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id fBRN9Ni53396; Thu, 27 Dec 2001 23:09:23 GMT (envelope-from scott) Date: Thu, 27 Dec 2001 23:09:22 +0000 From: Scott Mitchell To: Paolo Losi Cc: freebsd-questions@FreeBSD.ORG Subject: Re: CURRENT and STABLE on the same HD: any clever recipe? Message-ID: <20011227230922.A90501@localhost> References: <20011227215246.A24756@linux.netline.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011227215246.A24756@linux.netline.it>; from paolo@linux.netline.it on Thu, Dec 27, 2001 at 09:52:46PM +0100 X-Operating-System: FreeBSD 4.4-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 09:52:46PM +0100, Paolo Losi wrote: > Hello everyone, > I'm trying to put STABLE and CURRENT on the same HD and looking for > a clever way to do that. It would be nice to have 2 distinct slices for > the installation... > Any ideas? > Thanks > Paolo Hi Paolo, I've just done this myself; it turned out to be surprisingly easy in the end. The FreeBSD slices on my disk are laid out like this: ad0s1a = / for STABLE install ad0s1b = swap, shared by both installs ad0s1e = /var for STABLE install ad0s1f = /usr for STABLE install ad0s1g = /tmp & /var/tmp (symlinked together), shared by both installs ad0s2a = / for CURRENT install ad0s2e = /var for CURRENT install ad0s2f = /usr for CURRENT install ad0s2g = /local/0, shared by both installs If I was to add a second disk to this box, it would be mounted on /local/1. /usr/{src,obj,local,ports,X11R6} and /home are symlinked to appropriate directories on the large /local/0 partition -- separate /usr/src and /usr/obj for each install, of course. This partitioning scheme was suggested by Nik Clayton; it keeps everything whose size is pretty much fixed in small dedicated partitions, and everything that will grow over the life of the system on the same big partition -- less chance that you'll run out of space on (say) /home and have to start sylinking things into /usr/local, or whatever. I did the initial install from a 4.4 CD -- set up all the slices and partitions as above, but didn't set mountpoints for the CURRENT-only partitions. Then just to see if it wll worked, did a second 4.4 install on the CURRENT partitions, with the shared stuff mounted appropriately. With BootEasy as the boot manager, I can select which install to use simply by hitting F1 or F2 at boot time. Sysinstall and booteasy all appear to be perfectly happy with this arrangement; the two installs don't interfere with each other at all, as far as I can see. I've upgraded one install to -STABLE and will get the other one up to -CURRENT over the weekend, hopefully. I chose to do this with a local mirror of the CVS repository in /home/ncvs, from which I can checkout and build whatever versions I want... you could also just run two cvsup jobs to update your respective -CURRENT and -STABLE /usr/src directories. It probably doesn't make much difference which method you use, unless you're making extensive local changes that you want to check in to a local repository. Hope that all makes sense; let me know if you need any more details. Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:13:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.mail.pas.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 07A3037B419 for ; Thu, 27 Dec 2001 15:13:21 -0800 (PST) Received: from pool0016.cvx10-bradley.dialup.earthlink.net ([209.178.182.16]) by albatross.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16JjiB-000631-00 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 15:13:20 -0800 User-Agent: Microsoft-Entourage/9.0.2509 Date: Thu, 27 Dec 2001 15:13:19 -0800 Subject: Re: question about bsd From: Wes Baehr To: "freebsd-questions@FreeBSD.ORG" Message-ID: In-Reply-To: <20011226215857.92AC137B405@hub.freebsd.org> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 12/26/01 2:00 PM, "Doug Reynolds" wrote: > On Wed, 26 Dec 2001 11:56:16 -0600, Murphy, Derrick wrote: > >> I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram and >> a floppy drive. The hd is 200Mb What kind of unix could i install on >> this? Im guessing it would have to be a pretty old version to work with so >> little. If anyone knows of any free unix versions that would work with >> this, please let me know ^_^ Thanks > > picobsd. > > you need like 12mbs of ram for freebsd Not true, I run freebsd 4.3-RELEASE on a 33mhz 486 with 8MB of RAM. Although the performance is worse than a lagging 28.8 dialup user, it still 'works'. (I gave the box the name 'latency' for its slowness :P) > > --- > doug reynolds | the maverick | mav@wastegate.net > > PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -iwes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:14: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rpi.edu (mail.rpi.edu [128.113.22.40]) by hub.freebsd.org (Postfix) with ESMTP id C5ADD37B41C for ; Thu, 27 Dec 2001 15:13:59 -0800 (PST) Received: from [128.113.24.47] (gilead.acs.rpi.edu [128.113.24.47]) by mail.rpi.edu (8.11.3/8.11.3) with ESMTP id fBRNDsM56586; Thu, 27 Dec 2001 18:13:54 -0500 Mime-Version: 1.0 X-Sender: drosih@mail.rpi.edu Message-Id: In-Reply-To: <20011227215246.A24756@linux.netline.it> References: <20011227215246.A24756@linux.netline.it> Date: Thu, 27 Dec 2001 18:13:51 -0500 To: Paolo Losi , freebsd-questions@FreeBSD.ORG From: Garance A Drosihn Subject: Re: CURRENT and STABLE on the same HD: any clever recipe? Content-Type: text/plain; charset="us-ascii" ; format="flowed" X-Scanned-By: MIMEDefang 2.1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 9:52 PM +0100 12/27/01, Paolo Losi wrote: >Hello everyone, > I'm trying to put STABLE and CURRENT on the same HD and looking >for a clever way to do that. It would be nice to have 2 distinct slices >for the installation... It's fairly easy to do, if you have a good understanding of what freebsd is looking for "at install time" and "at bootup time". If you want a simple recipe which should work, try the following: Decide which version of freebsd you want to have first in the layout on the physical disk, and which you want to have second. Decide what sizes you want for both. Start to install the version you wish to have *second* on the disk. In the "fdisk" step, create two slices. Create the first slice the size you want for the first version of freebsd, but mark that as a 'DOS' slice (or probably anything except a freebsd slice). Create the second slice the size you want for the second version of freebsd, and leave that defined as a freebsd slice. Continue on through the installation, putting all the partitions for the second system in that second slice. Note that when you get to the 'disklabel' step, it will only show you the second slice, because the first slice was not marked as a freebsd slice. So, just finish off this installation as if it were the only thing you were installing. Now go back and install whichever version you want to be first on the disk. In the fdisk step, just switch the slice-type from 'DOS' (or whatever you used) to 'FreeBSD'. Do not do anything to that second slice, which already has a version of freebsd installed in it. In the disklabel step, only create new partitions from the first slice. It is probably best to ignore all the partitions which are already defined in the second slice if you do not have a good idea of what is going on. On the other hand, it is mighty tempting to use the same swap-partition for both systems, so you might want to have the second installation use the swap partition from the first install. Continue on through the second installation. This should give you two separate freebsd systems, which you can switch between at bootup time. -- Garance Alistair Drosehn = gad@eclipse.acs.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:16:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 3F61537B417 for ; Thu, 27 Dec 2001 15:16:42 -0800 (PST) Received: from dialup-209.244.104.36.dial1.sanjose1.level3.net ([209.244.104.36] helo=blossom.cjclark.org) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 16JjlQ-0004xE-00; Thu, 27 Dec 2001 15:16:41 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBRNGbM07051; Thu, 27 Dec 2001 15:16:37 -0800 (PST) (envelope-from cjc) Date: Thu, 27 Dec 2001 15:16:37 -0800 From: "Crist J . Clark" To: Joe Clarke Cc: Drew Tomlinson , questions@FreeBSD.ORG Subject: Re: How To Recursively Search Directory For Text String In Files? Message-ID: <20011227151637.J2090@blossom.cjclark.org> References: <011701c18f24$951d3b00$c42a6ba5@lc.ca.gov> <20011227172121.Q11529-100000@shumai.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011227172121.Q11529-100000@shumai.marcuscom.com>; from marcus@marcuscom.com on Thu, Dec 27, 2001 at 05:23:33PM -0500 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 05:23:33PM -0500, Joe Clarke wrote: > > > On Thu, 27 Dec 2001, Drew Tomlinson wrote: > > > OK, I am beginning to understand the power of FBSD and am sure this is > > possible. I just don't know how to do it. What I want to do is search > > all files in my current directory and all the directories below it for a > > text string and then know what file(s) contains the string. I > > understand that grep will do the search but my knowledge is limited to > > "cat file.txt | grep string". How can I construct a command in tcsh to > > feed each file to cat and then feed it to grep *AND* know the name of > > the file grep found the match? Do I have the right concept? Is there a > > better way to accomplish my goal? > > > > You can do grep -r *, but I prefer: Actually, $ grep -r . Would be the better way to search the cwd. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:26:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.retemail.es (smtp05.iddeo.es [62.81.186.15]) by hub.freebsd.org (Postfix) with ESMTP id DFCEB37B405 for ; Thu, 27 Dec 2001 15:26:21 -0800 (PST) Received: from conway.localdomain ([62.174.67.94]) by smtp05.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id <20011227232621.OAEQ25555.smtp05.retemail.es@conway.localdomain> for ; Fri, 28 Dec 2001 00:26:21 +0100 Date: Fri, 28 Dec 2001 00:25:12 +0100 From: F.Xavier Noria To: freebsd-questions@freebsd.org Subject: Re: vmware and win98 Message-Id: <20011228002512.6f67e517.fxn@retemail.es> In-Reply-To: <200112272238.fBRMctk24560@smtp.delfi.lv> References: <200112272238.fBRMctk24560@smtp.delfi.lv> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 27 Dec 2001 22:38:55 GMT uwi@mail.delfi.lv wrote: : ok, I have now vmware2 running Win98. Next question, am I supposed to : live in a 640x480 world filled with blazing palette out of 16 : colors...*cough* that wouldn't accomplish my goals definitely. : : so, is the any way (driver perhaps) that would allow me to chew up my : boredom? The only way that I am aware of is to use the VMware Tools suite: http://ftp.hit.edu.cn/linux/Datas/Docs/webmirror/www.vmware.com/vmwaretools.html -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:28: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-82.quicksilver.net.nz [202.89.142.82]) by hub.freebsd.org (Postfix) with ESMTP id 6CF0B37B419 for ; Thu, 27 Dec 2001 15:28:02 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBRNTrF02293; Fri, 28 Dec 2001 12:29:53 +1300 (NZDT) (envelope-from jonc) Date: Fri, 28 Dec 2001 12:29:52 +1300 From: Jonathan Chen To: Doug Reynolds Cc: freebsd-questions Subject: Re: multiport serial cards Message-ID: <20011228122952.A2071@grimoire.chen.org.nz> References: <20011227220300.EF1DF37B416@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011227220300.EF1DF37B416@hub.freebsd.org>; from mav@wastegate.net on Thu, Dec 27, 2001 at 05:04:14PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 05:04:14PM -0500, Doug Reynolds wrote: > Does anyone have a recommendation on which card works best or good with > freebsd? i am looking for 4 port card that'll share all 4 ports with > one irq. also, will freebsd display it's bootup with a shared irq > serial port? I liked Stallion cards. -- Jonathan Chen ---------------------------------------------------------------------- "Opportunity does not knock, it presents itself when you beat down the door" - W.E. Channing To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:28: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 4C77337B416 for ; Thu, 27 Dec 2001 15:27:59 -0800 (PST) Received: (qmail 1761 invoked from network); 27 Dec 2001 23:27:58 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 27 Dec 2001 23:27:58 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Thu, 27 Dec 2001 17:27:55 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw Thread-Index: AcGPEt0LsQG7aJu/RImDuXagSJaR1gAGywXg From: "Robert D. Hughes" To: "OutBack Dingo" , Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm not a coder, but I'd do what I could to help support it. -----Original Message----- From: OutBack Dingo [mailto:dingo@microbsd.net] Sent: Thursday, December 27, 2001 3:10 PM To: Stephen Hovey Cc: Simon Siemonsma; Anthony Atkielski; freebsd-questions@FreeBSD.ORG Subject: Re: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw Well its a task I think id like to host/take on, now who wants to join in supporting/coding it ?? On Thu, 2001-12-27 at 15:06, Stephen Hovey wrote: > Someone should start a popup:ip:advert DNS site like the email blackhole > list!=20 >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:34:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clink.schulte.org (clink.schulte.org [209.134.156.193]) by hub.freebsd.org (Postfix) with ESMTP id 3C43537B405 for ; Thu, 27 Dec 2001 15:34:22 -0800 (PST) Received: from schulte-laptop.nospam.schulte.org (nb-65.netbriefings.com [209.134.134.65]) by clink.schulte.org (Postfix) with ESMTP id 1D3742440D; Thu, 27 Dec 2001 17:34:21 -0600 (CST) Message-Id: <5.1.0.14.0.20011227173200.03fe94a8@pop3s.schulte.org> X-Sender: X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 27 Dec 2001 17:33:54 -0600 To: "Swanson, Toby J." , "'questions@freebsd.org'" From: Christopher Schulte Subject: Re: unable to search the questions archive In-Reply-To: <5558EC7BB1C7D411927400508BE3590002AF246E@tvaknxxch1.knx.tv a.gov> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 04:53 PM 12/27/2001 -0500, Swanson, Toby J. wrote: >All the other archives seem to be available. Is >there a problem or am I doing something wrong? They are frequently unavailable. Use http://groups.google.com/groups?hl=en&group=sol.lists.freebsd.questions When they are down. It's a more powerful interface, anyhow. >TIA, > >Toby --c To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:44: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 35C5837B41A for ; Thu, 27 Dec 2001 15:44:05 -0800 (PST) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id fBRNhrS98949; Thu, 27 Dec 2001 17:43:53 -0600 (CST) (envelope-from nick@rogness.net) Date: Thu, 27 Dec 2001 17:43:53 -0600 (CST) From: Nick Rogness X-Sender: nick@cody.jharris.com To: "Robert D. Hughes" Cc: OutBack Dingo , freebsd-questions@FreeBSD.ORG Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 27 Dec 2001, Robert D. Hughes wrote: > Well its a task I think id like to host/take on, now who wants to join > in supporting/coding it ?? > > On Thu, 2001-12-27 at 15:06, Stephen Hovey wrote: > > Someone should start a popup:ip:advert DNS site like the email > blackhole > > list! It would be nice if it was a "plugin module" to squid or similar, instead of a seperate package. squid is a very popular proxy and this might be a good way to combine junkbuster and your rbl-like features with it into 1 sweet-ass package. I'm not familiar with junkbuster, but it would be a good place to start, I guess. A little research might reveal that this idea is a work in progress...so you don't have to "reinvent the wheel". Nick Rogness - Don't mind me...I'm just sniffing your packets To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:49:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp017.mail.yahoo.com (smtp017.mail.yahoo.com [216.136.174.114]) by hub.freebsd.org (Postfix) with SMTP id 3432F37B419 for ; Thu, 27 Dec 2001 15:49:48 -0800 (PST) Received: from shiva-dhcp-130.dial.upmc.edu (HELO ALBINI) (128.147.34.130) by smtp.mail.vip.sc5.yahoo.com with SMTP; 27 Dec 2001 23:49:44 -0000 Date: Thu, 27 Dec 2001 18:48:10 -0500 From: Rod Person To: Jerry McAllister Cc: anthony@freebie.atkielski.com, freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-Id: <20011227184810.6b3993fe.roddierod@yahoo.com> In-Reply-To: <200112272027.fBRKR9t17197@clunix.cl.msu.edu> References: <011101c18f12$f31aaec0$0a00000a@atkielski.com> <200112272027.fBRKR9t17197@clunix.cl.msu.edu> Organization: Open Source Beef X-Mailer: Sylpheed version 0.6.1 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It was Thu, 27 Dec 2001 15:27:08 -0500 (EST) when I read this: > Jeeze, don't start another of those useless and interminably boring > contests of juvenile word slicing about using Win or BSD again. We > just got rid of one of those. Yes, i think thats all this will become. I'm sorry I was just amazed again by the comment of Anthony, I don't even know why I responded, I guess I just needed a little more frustration in my life :) I'm going to go tell my 4 year old daughter that FreeBSD is to complicated and complex and worthless on the desktop! And no matter how much see begs to play mad bomber or draw in the GIMP or type her letters in Abiword or even browse to nick.com in Opera that no she can not do it because you need window or maybe i'll just teach her to build a server! OOPS...I did it again didn't I?? Rod roddierod@yahoo.com "I'm a character in a world gone wrong!" - Entombed - Returning to Madness _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 15:51:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.mrf.mail.rcn.net (smtp02.mrf.mail.rcn.net [207.172.4.61]) by hub.freebsd.org (Postfix) with ESMTP id D515637B417 for ; Thu, 27 Dec 2001 15:51:08 -0800 (PST) Received: from 66-44-69-153.s407.tnt8.lnhva.md.dialup.rcn.com ([66.44.69.153] helo=sten.alder.net) by smtp02.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16JkIi-0006jL-00 for freebsd-questions@freebsd.org; Thu, 27 Dec 2001 18:51:04 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Thu, 27 Dec 2001 18:50:02 -0500 Date: Thu, 27 Dec 2001 18:50:02 -0500 From: "Bob Hall" To: FreeBSD Questions Subject: Re: Teaching parents UNIX Message-ID: <20011227185002.A619@starpower.net> Mail-Followup-To: FreeBSD Questions References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <005901c18e9e$9edcc510$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Thu, Dec 27, 2001 at 07:20:46AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 07:20:46AM +0100, Anthony Atkielski wrote: > The real answer, like it or not, is to keep your mother and sister on > Windows. Just because you may prefer FreeBSD doesn't mean that everyone > around you has to prefer it as well. My brother and I have just gone through this with my Dad. In a situation where the maintainer and the user are different people, the best solution is to use the OS that the maintainer prefers to maintain. The maintainer will provide better maintenance and instruction, and the user will have a more reliable and easier to use system. In the long run, the user will prefer the system the maintainer prefers. Bob Hall To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:17: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from out002pub.verizon.net (out002pub.verizon.net [206.46.170.102]) by hub.freebsd.org (Postfix) with ESMTP id AEFCE37B41A for ; Thu, 27 Dec 2001 16:16:24 -0800 (PST) Received: from verizon.net (pool-141-154-55-106.bos.east.verizon.net [141.154.55.106]) by out002pub.verizon.net with ESMTP ; id fBS0G8d26003 Thu, 27 Dec 2001 18:16:09 -0600 (CST) Message-ID: <3C2BB845.7070508@verizon.net> Date: Thu, 27 Dec 2001 19:09:41 -0500 From: Simon Morton Reply-To: smorton@acm.org User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.7) Gecko/20011221 X-Accept-Language: en,pdf,zh-CN,de-DE,zh-TW,zh, zh- MIME-Version: 1.0 To: Drew Tomlinson Cc: Joe Clarke , questions@FreeBSD.ORG Subject: Re: How To Recursively Search Directory For Text String In Files? References: <20011227172121.Q11529-100000@shumai.marcuscom.com> <014501c18f26$9d430970$c42a6ba5@lc.ca.gov> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG That won't quite do it if you want only the names of matching files. The following will do it for you without xargs: find -type f [-name {} \; which is almost the same as find -type f [-name {} \; -print grep -l prints out just the name of any file containing the pattern. grep -q prints nothing but returns 0 for matching files -exec is a conditional operator; if the command called by -exec returns 0, -exec returns TRUE. This can be useful if you wanted an action other than -print, say -delete for example. HTH Simon Drew Tomlinson wrote: >>> >>You can do grep -r *, but I prefer: >> >>find -type f -name | xargs >> > grep > >> >> > > Thank you very much! I *knew* it had to be possible but had not come > across xargs yet. It looks like a very powerful tool that will have a > lot of uses! > > Drew > > >>For example: >> >>find /usr/ports -type f -name Makefile | xargs grep -i snmp >> >>This would search all Makefiles found anywhere in the /usr/ports tree >> > and > >>grep case-insensitvely through them for the pattern "snmp". >> >>Joe >> >> >>>Thanks, >>> >>>Drew >>> >>> >>>To Unsubscribe: send mail to majordomo@FreeBSD.org >>>with "unsubscribe freebsd-questions" in the body of the message >>> >>> >>> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> >> >> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > -- http://www.SimonMorton.com smorton at acm dot org \rm -rf /bin/laden To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:17:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web9106.mail.yahoo.com (web9106.mail.yahoo.com [216.136.128.243]) by hub.freebsd.org (Postfix) with SMTP id 3588837B405 for ; Thu, 27 Dec 2001 16:17:38 -0800 (PST) Message-ID: <20011228001738.32998.qmail@web9106.mail.yahoo.com> Received: from [208.60.180.47] by web9106.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 16:17:38 PST Date: Thu, 27 Dec 2001 16:17:38 -0800 (PST) From: Paul Citro Subject: Escape from the Windows Madness To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am a typical computer user with a Windows 98, AMD K6 system with 128 megs of ram and a 20 gig. hard drive. I want to escape from the Microsoft monopoly and Windows madness. Can I use dsb? Will it be compatible with my computers mother board, sound card, video card, cd, modem, Panasonic monitor, Cannon printer, Vivitar scanner? Can I use my favorite Internet Provider, Bluelight? ===== Sincerely Paul Citro Are you REALLY getting enough sleep? Check out this website: http://www.cnn.com/HEALTH/9703/17/nfm/sleep.deprivation/index.html Has your karma run over your dogma? Check out these Buddhist groups in South Florida; http://www.home.earthlink.net/~castelnet/philip/zen/zen.html __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:28:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from blacklamb.mykitchentable.net (ekgr-dsl2-77.citlink.net [207.173.226.77]) by hub.freebsd.org (Postfix) with ESMTP id E91F937B405 for ; Thu, 27 Dec 2001 16:28:15 -0800 (PST) Received: from tagalong (unknown [165.107.42.196]) by blacklamb.mykitchentable.net (Postfix) with SMTP id 5080FEE692; Thu, 27 Dec 2001 16:30:35 -0800 (PST) Message-ID: <019901c18f36$89c8f8e0$c42a6ba5@lc.ca.gov> From: "Drew Tomlinson" To: Cc: References: <20011227172121.Q11529-100000@shumai.marcuscom.com> <014501c18f26$9d430970$c42a6ba5@lc.ca.gov> <3C2BB845.7070508@verizon.net> Subject: Re: How To Recursively Search Directory For Text String In Files? Date: Thu, 27 Dec 2001 16:28:14 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-Mimeole: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Simon Morton" To: "Drew Tomlinson" Cc: "Joe Clarke" ; Sent: Thursday, December 27, 2001 4:09 PM Subject: Re: How To Recursively Search Directory For Text String In Files? > That won't quite do it if you want only the names of matching files. > The following will do it for you without xargs: > > find -type f [-name {} \; > > which is almost the same as > > find -type f [-name {} > \; -print > > grep -l prints out just the name of any file containing the pattern. > grep -q prints nothing but returns 0 for matching files > > -exec is a conditional operator; if the command called by -exec returns > 0, -exec returns TRUE. This can be useful if you wanted an action > other than -print, say -delete for example. Thank you for your additional explanation. In this particular case it didn't matter it I got only the names of the files or the names plus the matches. But I can see where only the file names might be needed in some cases as in the -delete you mention. Thanks for your help, Drew > HTH > Simon > > Drew Tomlinson wrote: > > > >>> > >>You can do grep -r *, but I prefer: > >> > >>find -type f -name | xargs > >> > > grep > > > >> > >> > > > > Thank you very much! I *knew* it had to be possible but had not come > > across xargs yet. It looks like a very powerful tool that will have a > > lot of uses! > > > > Drew > > > > > >>For example: > >> > >>find /usr/ports -type f -name Makefile | xargs grep -i snmp > >> > >>This would search all Makefiles found anywhere in the /usr/ports tree > >> > > and > > > >>grep case-insensitvely through them for the pattern "snmp". > >> > >>Joe > >> > >> > >>>Thanks, > >>> > >>>Drew > >>> > >>> > >>>To Unsubscribe: send mail to majordomo@FreeBSD.org > >>>with "unsubscribe freebsd-questions" in the body of the message > >>> > >>> > >>> > >> > >>To Unsubscribe: send mail to majordomo@FreeBSD.org > >>with "unsubscribe freebsd-questions" in the body of the message > >> > >> > >> > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > -- > http://www.SimonMorton.com > smorton at acm dot org > \rm -rf /bin/laden > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:31:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc53.attbi.com (rwcrmhc53.attbi.com [204.127.198.39]) by hub.freebsd.org (Postfix) with ESMTP id 1550637B405; Thu, 27 Dec 2001 16:31:30 -0800 (PST) Received: from cc1047872c ([12.246.1.195]) by rwcrmhc53.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20011228003129.VYCN20122.rwcrmhc53.attbi.com@cc1047872c>; Fri, 28 Dec 2001 00:31:29 +0000 Message-ID: <00e101c18f37$f1093410$0201a8c0@cc1047872c> From: "M. Jeffrey" To: , Subject: Intel PRO/100 CardBus II (32-bit) network card for laptop Date: Thu, 27 Dec 2001 16:38:16 -0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00DE_01C18EF4.E2B37260" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_00DE_01C18EF4.E2B37260 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have an Intel PRO/100 CardBus II (32-bit) card that I use on my IBM = ThinkPad 600E, and after a FreeBSD 4.4 install (from CDs) the card = doesn't seem to be recognized. I do a 'ifconfig -a' and it's not listed = there. I've done some searching on the Internet and I cannot seem to find a = definitive answer if the card is supported and/or how to configure it. =20 I've had no issues with Windows 2000 on the laptop. I'm so used to = hardware components working "right out of the box" that I'm at a loss on = what to do. :-) Plus, I'm no expert of FreeBSD or other Unices. Do I need to compile my own kernel? Or do I have wait for the 5.0 = release? Any guidance is appreciated. Michael suchindryn@mailexpire.com ------=_NextPart_000_00DE_01C18EF4.E2B37260 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I have an = Intel PRO/100=20 CardBus II (32-bit) card that I use on my IBM ThinkPad 600E, and after a = FreeBSD=20 4.4 install (from CDs) the card doesn't seem to be recognized.  I = do a=20 'ifconfig -a' and it's not listed there.
 
I've done = some searching=20 on the Internet and I cannot seem to find a definitive answer if the = card is=20 supported and/or how to configure it. 
 
I've had no = issues with=20 Windows 2000 on the laptop.  I'm so used to hardware components = working=20 "right out of the box" that I'm at a loss on what to do.  :-)  = Plus,=20 I'm no expert of FreeBSD or other Unices.
 
Do I need to compile my own = kernel? =20 Or do I have wait for the 5.0 release?
 
Any guidance is = appreciated.
 
Michael
suchindryn@mailexpire.com
------=_NextPart_000_00DE_01C18EF4.E2B37260-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:32:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id 1ACD737B423 for ; Thu, 27 Dec 2001 16:32:28 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16Jkwd-0006KA-00; Fri, 28 Dec 2001 00:32:19 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16JkqB-000LbJ-00; Fri, 28 Dec 2001 00:25:39 +0000 Date: Fri, 28 Dec 2001 00:25:39 +0000 From: Ceri To: Drew Tomlinson Cc: questions@freebsd.org Subject: Re: How To Recursively Search Directory For Text String In Files? Message-ID: <20011228002539.GA82923@rhadamanth> References: <011701c18f24$951d3b00$c42a6ba5@lc.ca.gov> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <011701c18f24$951d3b00$c42a6ba5@lc.ca.gov> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 02:19:42PM -0800, Drew Tomlinson wrote: > OK, I am beginning to understand the power of FBSD and am sure this is > possible. I just don't know how to do it. What I want to do is search > all files in my current directory and all the directories below it for a > text string and then know what file(s) contains the string. I > understand that grep will do the search but my knowledge is limited to > "cat file.txt | grep string". grep -r string * Ceri -- keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:44:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 6738837B41A for ; Thu, 27 Dec 2001 16:44:17 -0800 (PST) Received: from ppp10-3.ath.forthnet.gr Bernie_X@smtp-send.myrealbox.com [213.16.157.3] by smtp-send.myrealbox.com with Novell NIMS $Revision: 2.88 $ on Novell NetWare via secured & encrypted transport (TLS); Thu, 27 Dec 2001 17:44:11 -0700 Date: Fri, 28 Dec 2001 00:32:24 +0000 (GMT Standard Time) From: Bernie To: freebsd-questions@FreeBSD.ORG Subject: Easy Questions -- newcomer Message-ID: X-X-Sender: Bernie_X@imap.myrealbox.com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, i'm new to freebsd and yesterday i tried for first time to do build world. i did cvsup, thought i was going for 4.4 but got 4.5 prerelease instead. Anyway, nothing wrong with that, i did all the process from the manual and got build world and a generic kernel. When i tried to compile my own kernel things didnt go so well. I tried compiling with different options etc a few times but compilation always stoped. Today i did cvsup again and buildworld but havent run mergemaster yet and haven't configured custom kernel. i'd like to think that things will work today... Anyway, can anyone answer the following? 1. Is it possible that while doing cvsup i got the server in the middle of updating and got out of sync sources? Is there any way to ensure that this doesnt happen? 2. How can i redirect the output of 'make' in c-shell with stdout in one file and stderr in another? i thied this: make >make_stdout.txt 2>make_stderr.txt but i got messg ambigus redirection. i suspect that the above works for bash only (or maybe not). In any case, what's the equivalent for tcsh? 3. The ports collection, is there a tree for each version ie a tree for 4.3, another for 4.4 etc? For example, if i got 4.3 and get the ports tree of 4.4 or 4.5 am i gonna get trouble? is there any rule for that? 4. Ports can take too long sometimes (download + compile). Is there any advantage of compiling ports instead of tracking and downloading the packages for a given app? packages seem faster. Thanks a lot and sorry for long post. Regards, Bernie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:46: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20508.mail.yahoo.com (web20508.mail.yahoo.com [216.136.226.143]) by hub.freebsd.org (Postfix) with SMTP id 59DD637B428 for ; Thu, 27 Dec 2001 16:45:42 -0800 (PST) Message-ID: <20011228004541.51833.qmail@web20508.mail.yahoo.com> Received: from [63.46.48.128] by web20508.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 16:45:41 PST Date: Thu, 27 Dec 2001 16:45:41 -0800 (PST) From: Robin Hall Subject: Re: device not configured To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok I moved the jumpers on my modem to com 2 or cuaa1 or sio1 whichever it is. Now when I boot up to install freeBSD 4.4 stable it gets to the point of detecting hardware and just stays there. Does BSD not like modems? How am I supposed to install this so that I can use it as a router with a dialup connection? Why would it freeze on detecting hardware if I have the modem set to cuaa1? When I was getting it installed it wouldn't install kde or any windowmanager. I did get it to startx with just the bare bones x. I have 24 MB of Ram is this enough to use a window manager? Robin E. Hall On Wed 26 Dec 01 12:10, Andrew C. Hornback wrote: > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall > > Sent: Wednesday, December 26, 2001 6:36 AM > > To: freebsd-questions@FreeBSD.org > > Subject: RE: device not configured > > > > > > I have an internal AOpen modem. This is a hardware > > modem. I have the jumpers set to com 3 in windows > > which is ttyS0 in linux and should be cuaa2 in > > freeBSD. Why isn't this showing up on the correct > > port? > > > > Robin E. Hall > > If you're using the GENERIC kernel, it only supports devices on classical > COM 1 and COM 2. To support any other COM ports, you need to compile a new > kernel with support for those ports. A look at the GENERIC config file > should of assistance. > > --- Andy ===== Robin E. Hall rob33_me@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:50:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 7A0E137B416 for ; Thu, 27 Dec 2001 16:50:49 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Thu, 27 Dec 2001 19:53:03 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: IPFW rc.firewall Date: Thu, 27 Dec 2001 19:50:46 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In rc.firewall one can configure the simple type of firewall rule set. It requests you to enter your settings for "your outside network, mask, ip". This looks like it wants a public static ip address from ISP. I logon to my ISP using user ppp and get a dynamic IP address that is different every time. What value am I to enter in these fields so it knows it's dynamic ip address? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 16:57:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id EC63337B417 for ; Thu, 27 Dec 2001 16:57:31 -0800 (PST) Received: (qmail 1907 invoked from network); 28 Dec 2001 00:57:31 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 00:57:31 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: Escape from the Windows Madness X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Thu, 27 Dec 2001 18:57:27 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Escape from the Windows Madness Thread-Index: AcGPNUJMcjgJNY9vTnyhvDdafLlffAABPuXw From: "Robert D. Hughes" To: "Paul Citro" , Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This question begs for a consultation with the *FreeBSD* (wtf is dsb) hardware compatibility list. Since you haven't bothered to post exactly what hardware you have, its really an impossible question to answer. However, FreeBSD is compatible with most hardware. Yours? See above. -----Original Message----- From: Paul Citro [mailto:citris1@yahoo.com] Sent: Thursday, December 27, 2001 6:18 PM To: freebsd-questions@FreeBSD.ORG Subject: Escape from the Windows Madness Hello, I am a typical computer user with a Windows 98, AMD K6 system with 128 megs of ram and a 20 gig. hard drive. I want to escape from the Microsoft monopoly and Windows madness. Can I use dsb? Will it be compatible with my computers mother board, sound card, video card, cd, modem, Panasonic monitor, Cannon printer, Vivitar scanner? Can I use my favorite Internet Provider, Bluelight?=20 =3D=3D=3D=3D=3D Sincerely=20 Paul Citro Are you REALLY getting enough sleep? Check out this website: http://www.cnn.com/HEALTH/9703/17/nfm/sleep.deprivation/index.html Has your karma run over your dogma? Check out these Buddhist groups in South Florida; http://www.home.earthlink.net/~castelnet/philip/zen/zen.html __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17: 0:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id DBBB637B417 for ; Thu, 27 Dec 2001 17:00:54 -0800 (PST) Received: (qmail 1926 invoked from network); 28 Dec 2001 01:00:54 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 01:00:54 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Subject: RE: IPFW rc.firewall X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Thu, 27 Dec 2001 19:00:53 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: IPFW rc.firewall Thread-Index: AcGPOerIyC/tmA/kRRqoBaFZQbahlgAANTwQ From: "Robert D. Hughes" To: "Joe & Fhe Barbish" , "FBSD Questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Say it with me: "Google is my friend". = http://www.google.com/search?q=3D+%2Bfreebsd+%2Bdialup+%2Bipfw as an = example. -----Original Message----- From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] Sent: Thursday, December 27, 2001 6:51 PM To: FBSD Questions Subject: IPFW rc.firewall In rc.firewall one can configure the simple type of firewall rule set. It requests you to enter your settings for "your outside network, mask, ip". This looks like it wants a public static ip address from ISP. I logon to my ISP using user ppp and get a dynamic IP address that is different every time. What value am I to enter in these fields so it knows it's dynamic ip address? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17: 6: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from heorot.1nova.com (heorot.1nova.com [63.105.24.23]) by hub.freebsd.org (Postfix) with ESMTP id 64DC537B417 for ; Thu, 27 Dec 2001 17:05:57 -0800 (PST) Received: by heorot.1nova.com (Postfix, from userid 1000) id 3F11818F1; Thu, 27 Dec 2001 18:06:11 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by heorot.1nova.com (Postfix) with ESMTP id 364CD18F0; Thu, 27 Dec 2001 18:06:11 -0800 (PST) Date: Thu, 27 Dec 2001 18:06:11 -0800 (PST) From: Rick Hamell To: Robin Hall Cc: freebsd-questions@FreeBSD.org Subject: Re: device not configured In-Reply-To: <20011228004541.51833.qmail@web20508.mail.yahoo.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Ok I moved the jumpers on my modem to com 2 or cuaa1 > or sio1 whichever it is. > Now when I boot up to install freeBSD 4.4 stable it > gets to the point of > detecting hardware and just stays there. Does BSD not > like modems? How am I Most likely you have an IRQ conflict. Is Com2/SerialB disabled on your motherboard? Rick ******************************************************************* Rick's FreeBSD Web page http://heorot.1nova.com/freebsd Ace Logan's Hardware Guide http://hw.shatteredcrystal.com ***FreeBSD - The Power to Serve! http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:12:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20502.mail.yahoo.com (web20502.mail.yahoo.com [216.136.226.137]) by hub.freebsd.org (Postfix) with SMTP id C6DAD37B421 for ; Thu, 27 Dec 2001 17:12:45 -0800 (PST) Message-ID: <20011228011245.53420.qmail@web20502.mail.yahoo.com> Received: from [63.46.48.128] by web20502.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 17:12:45 PST Date: Thu, 27 Dec 2001 17:12:45 -0800 (PST) From: Robin Hall Subject: Re: device not configured To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Ok I moved the jumpers on my modem to com 2 or cuaa1 > or sio1 whichever it is. > Now when I boot up to install freeBSD 4.4 stable it > gets to the point of > detecting hardware and just stays there. Does BSD not > like modems? How am I Most likely you have an IRQ conflict. Is Com2/SerialB disabled on your motherboard? Rick Yes I disabled 1 and 2 in the bios ===== Robin E. Hall rob33_me@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:21:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id B679437B405 for ; Thu, 27 Dec 2001 17:21:46 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Thu, 27 Dec 2001 20:24:00 -0500 From: "Joe & Fhe Barbish" To: "Robin Hall" Cc: "FBSD Questions" Subject: RE:Modem device not configured Date: Thu, 27 Dec 2001 20:21:43 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011228004541.51833.qmail@web20508.mail.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You are in a hole caused by very poor management of FBSD change control. At 4.0 a change was allowed in to stop a conflict between isa and pci internal modem hardware probing. This change for all purposes closed the door for pci internal modems. There used to be the pnp, setserial, and pnpinfo commands which allowed you to hack around the isa prob results to get a pci internal modem to work. Now all that is deactivated and pci modems users are left out in the cold. Maybe if enough people write problem reports this will get fixed. One would think that 2 years would have been enough time to get this fixed since 4.0 came out. If your modem is a isa modem then you should be able to get it working following the FAQ at this url. http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/troubleshoot.html#PNP-N OT-FOUND -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall Sent: Thursday, December 27, 2001 7:46 PM To: freebsd-questions@FreeBSD.org Subject: Re: device not configured Ok I moved the jumpers on my modem to com 2 or cuaa1 or sio1 whichever it is. Now when I boot up to install freeBSD 4.4 stable it gets to the point of detecting hardware and just stays there. Does BSD not like modems? How am I supposed to install this so that I can use it as a router with a dialup connection? Why would it freeze on detecting hardware if I have the modem set to cuaa1? When I was getting it installed it wouldn't install kde or any windowmanager. I did get it to startx with just the bare bones x. I have 24 MB of Ram is this enough to use a window manager? Robin E. Hall On Wed 26 Dec 01 12:10, Andrew C. Hornback wrote: > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall > > Sent: Wednesday, December 26, 2001 6:36 AM > > To: freebsd-questions@FreeBSD.org > > Subject: RE: device not configured > > > > > > I have an internal AOpen modem. This is a hardware > > modem. I have the jumpers set to com 3 in windows > > which is ttyS0 in linux and should be cuaa2 in > > freeBSD. Why isn't this showing up on the correct > > port? > > > > Robin E. Hall > > If you're using the GENERIC kernel, it only supports devices on classical > COM 1 and COM 2. To support any other COM ports, you need to compile a new > kernel with support for those ports. A look at the GENERIC config file > should of assistance. > > --- Andy ===== Robin E. Hall rob33_me@yahoo.com __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:26:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail7.triad.rr.com (fe7.southeast.rr.com [24.93.67.54]) by hub.freebsd.org (Postfix) with ESMTP id A83BE37B405 for ; Thu, 27 Dec 2001 17:26:19 -0800 (PST) Received: from 2kprohome ([66.56.171.119]) by mail7.triad.rr.com with Microsoft SMTPSVC(5.5.1877.687.68); Thu, 27 Dec 2001 20:26:18 -0500 Message-ID: <007e01c18f3e$5f3c5ba0$0203a8c0@2kprohome> From: "Joe Joplin" To: "H. Wade Minter" Cc: References: <20011227130949.T53311-100000@bunning.skiltech.com> Subject: Re: USB camera with 4-STABLE Date: Thu, 27 Dec 2001 20:24:18 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG There is a USB driver on gphoto for FreeBSD, http://sourceforge.net/projects/libusb/ Joe ----- Original Message ----- From: "H. Wade Minter" To: Cc: Sent: Thursday, December 27, 2001 1:10 PM Subject: Re: USB camera with 4-STABLE > On Thu, 27 Dec 2001 dochawk@psu.edu wrote: > > > Wade wondered, > > > > > I'm trying to use the USB connection on my Nikon "CoolPix 775" camera with > > > my FreeBSD machine. usbd is running. When I plug the camera's USB > > > connection in, I get: > > > > > > Dec 22 09:45:28 kenbridge /kernel: umass0: NIKON NIKON DSC E775, rev > > > > checkout gphoto. gphoto2 supports a lot of cameras. www.gphoto.org, > > iirc. I don't believe there's a port, as it's very alpha or pre-alpha > > at the moment, but I compiled it from source and it works. > > I'll check out gphoto, but I think this is more of a problem with the USB > Mass Storage driver, than an application problem. > > --Wade > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:31:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail0.crcom.net (mail0.crcom.net [208.220.74.20]) by hub.freebsd.org (Postfix) with ESMTP id A2EEE37B41A for ; Thu, 27 Dec 2001 17:31:09 -0800 (PST) Received: (qmail 14667 invoked from network); 28 Dec 2001 00:48:58 -0000 Received: from unknown (HELO crcom.net) (208.234.65.11) by 0 with SMTP; 28 Dec 2001 00:48:57 -0000 Message-ID: <3C2BD195.8090200@crcom.net> Date: Thu, 27 Dec 2001 19:57:41 -0600 From: Ty Purcell User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.5) Gecko/20011012 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: /dev/null Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Somehow I have written over /dev/null... How can I restore it to how it was? On my other bsd box it has the permissions crw-rw-rw I tried a reboot, and that replaced it, but the permissions are wrong, and it is adding files in instead of throwing them away... Thanks. Ty Purcell To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:31:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 6E79637B419 for ; Thu, 27 Dec 2001 17:31:08 -0800 (PST) Received: from dialup-209.244.104.36.dial1.sanjose1.level3.net ([209.244.104.36] helo=blossom.cjclark.org) by falcon.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16JlrX-0004cB-00; Thu, 27 Dec 2001 17:31:07 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBS1V5407677; Thu, 27 Dec 2001 17:31:05 -0800 (PST) (envelope-from cjc) Date: Thu, 27 Dec 2001 17:31:04 -0800 From: "Crist J . Clark" To: Bernie Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Easy Questions -- newcomer Message-ID: <20011227173104.L2090@blossom.cjclark.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Bernie_X@myrealbox.com on Fri, Dec 28, 2001 at 12:32:24AM +0000 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 12:32:24AM +0000, Bernie wrote: [snip] > 1. Is it possible that while doing cvsup i got the server in the > middle of updating and got out of sync sources? Is there any way > to ensure that this doesnt happen? It is possible, but very rare. > 2. How can i redirect the output of 'make' in c-shell with stdout > in one file and stderr in another? i thied this: > make >make_stdout.txt 2>make_stderr.txt > but i got messg ambigus redirection. i suspect that the above works > for bash only (or maybe not). sh, bash, ksh, and some others, but not csh-like ones. > In any case, what's the equivalent for > tcsh? $ ( make > make_stdout.txt ) >& make_stderr.txt > 3. The ports collection, is there a tree for each version ie a tree > for 4.3, another for 4.4 etc? For example, if i got 4.3 and get the > ports tree of 4.4 or 4.5 am i gonna get trouble? is there any rule > for that? There are no branches on the ports collection, only HEAD. > 4. Ports can take too long sometimes (download + compile). Is there > any advantage of compiling ports instead of tracking and downloading > the packages for a given app? packages seem faster. Use ports if there are customizations you wish to make during the compile process. Ports are more quickly and frequently updated than packages, check version numbers. Other than that, building a port on your own system is just warm fuzzies, no real advantage over packages. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:36: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 8E31E37B417 for ; Thu, 27 Dec 2001 17:35:58 -0800 (PST) Received: from dialup-63.214.209.154.dial1.philadelphia1.level3.net ([63.214.209.154] helo=sparky) by hawk.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16Jlw8-0004bF-00; Thu, 27 Dec 2001 17:35:52 -0800 From: Jud To: freebsd-questions@FreeBSD.ORG, Paul Citro Date: Thu, 27 Dec 2001 20:35:59 -0500 X-Priority: 3 (Normal) Reply-To: jud@operamail.com In-Reply-To: <20011228001738.32998.qmail@web9106.mail.yahoo.com> Message-Id: Subject: Re: Escape from the Windows Madness MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Mailer: Opera 6.0 build 1010 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 12/27/2001 7:17:38 PM, Paul Citro wrote: >Hello, > I am a typical computer user with a Windows 98, AMD >K6 system with 128 megs of ram and a 20 gig. hard >drive. I want to escape from the Microsoft monopoly >and Windows madness. Can I use dsb? Will it be >compatible with my computers mother board, sound card, >video card, cd, modem, Panasonic monitor, Cannon >printer, Vivitar scanner? Can I use my favorite >Internet Provider, Bluelight? > >===== >Sincerely >Paul Citro Current release version (FreeBSD 4.4) will support at least the hardware on the following list: http://www.freebsd.org/releases/4.4R/hardware-i386.html ISP won't be a problem as long as you're using the pay service that provides you an access number. However, if you're on the free service with ads and a banner that won't go away, that may be Windows- specific code. If you want to "escape the Windows madness," you're not a typical computer user. ;) But running FreeBSD involves a learning curve that can be steep. A friend who knows Unix would be a great asset, and this mailing list can be helpful. If you're looking for something a little less "hands on" that does some of the hard stuff for you, I hear the new Mandrake Linux is relatively easy to install and get running. I haven't used Linux myself, though - that's just hearsay I'm passing along. Jud > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:36: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20509.mail.yahoo.com (web20509.mail.yahoo.com [216.136.226.144]) by hub.freebsd.org (Postfix) with SMTP id 0ABEC37B419 for ; Thu, 27 Dec 2001 17:36:00 -0800 (PST) Message-ID: <20011228013559.10608.qmail@web20509.mail.yahoo.com> Received: from [63.46.48.128] by web20509.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 17:35:59 PST Date: Thu, 27 Dec 2001 17:35:59 -0800 (PST) From: Robin Hall Subject: RE:Modem device not configured To: Joe & Fhe Barbish Cc: FBSD Questions In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am sorry I should have said earlier. This modem is not PNP. I can't find anything that is really pertinant on this page. I have an AOpen FM56-ITU/2 modem. Robin E. Hall --- Joe & Fhe Barbish wrote: > You are in a hole caused by very poor management of > FBSD change control. At > 4.0 a change was allowed in to stop a conflict > between isa and pci internal > modem hardware probing. This change for all purposes > closed the door for pci > internal modems. There used to be the pnp, > setserial, and pnpinfo commands > which allowed you to hack around the isa prob > results to get a pci internal > modem to work. Now all that is deactivated and pci > modems users are left out > in the cold. Maybe if enough people write problem > reports this will get > fixed. One would think that 2 years would have been > enough time to get this > fixed since 4.0 came out. If your modem is a isa > modem then you should be > able to get it working following the FAQ at this > url. > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/troubleshoot.html#PNP-N > OT-FOUND > > > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On > Behalf Of Robin Hall > Sent: Thursday, December 27, 2001 7:46 PM > To: freebsd-questions@FreeBSD.org > Subject: Re: device not configured > > Ok I moved the jumpers on my modem to com 2 or cuaa1 > or sio1 whichever it is. > Now when I boot up to install freeBSD 4.4 stable it > gets to the point of > detecting hardware and just stays there. Does BSD > not > like modems? How am I > supposed to install this so that I can use it as a > router with a dialup > connection? Why would it freeze on detecting > hardware > if I have the modem set > to cuaa1? When I was getting it installed it > wouldn't > install kde or any > windowmanager. I did get it to startx with just the > bare bones x. I have 24 > MB of Ram is this enough to use a window manager? > > Robin E. Hall > > On Wed 26 Dec 01 12:10, Andrew C. Hornback wrote: > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On > Behalf Of Robin Hall > > > Sent: Wednesday, December 26, 2001 6:36 AM > > > To: freebsd-questions@FreeBSD.org > > > Subject: RE: device not configured > > > > > > > > > I have an internal AOpen modem. This is a > hardware > > > modem. I have the jumpers set to com 3 in > windows > > > which is ttyS0 in linux and should be cuaa2 in > > > freeBSD. Why isn't this showing up on the > correct > > > port? > > > > > > Robin E. Hall > > > > If you're using the GENERIC kernel, it only > supports devices on classical > > COM 1 and COM 2. To support any other COM ports, > you need to compile a new > > kernel with support for those ports. A look at > the > GENERIC config file > > should of assistance. > > > > --- Andy > > > ===== > > Robin E. Hall > rob33_me@yahoo.com > > > __________________________________________________ > Do You Yahoo!? > Send your FREE holiday greetings online! > http://greetings.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:38:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mankind.boredom.org (mankind.boredom.org [208.184.52.150]) by hub.freebsd.org (Postfix) with ESMTP id 8AB5237B417 for ; Thu, 27 Dec 2001 17:38:22 -0800 (PST) Received: by mankind.boredom.org (Postfix, from userid 166) id E9708816008; Thu, 27 Dec 2001 20:37:00 -0500 (EST) Date: Thu, 27 Dec 2001 20:37:00 -0500 From: "Alan P. Laudicina" To: Ty Purcell Cc: freebsd-questions@freebsd.org Subject: Re: /dev/null Message-ID: <20011227203700.B3117@boredom.org> References: <3C2BD195.8090200@crcom.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C2BD195.8090200@crcom.net>; from purcell@crcom.net on Thu, Dec 27, 2001 at 07:57:41PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 07:57:41PM -0600, Ty Purcell wrote: > > Somehow I have written over /dev/null... > > How can I restore it to how it was? > > On my other bsd box it has the permissions > > crw-rw-rw cd /dev ; ./MAKEDEV null To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:43:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from molly.intercom.net (molly.intercom.net [216.240.106.84]) by hub.freebsd.org (Postfix) with ESMTP id C444C37B419 for ; Thu, 27 Dec 2001 17:43:09 -0800 (PST) Received: from cross (hh1108080.direcpc.com [206.71.108.80]) by molly.intercom.net (8.12.1/8.12.1) with SMTP id fBS1hdpk009582; Thu, 27 Dec 2001 20:43:41 -0500 (EST) Message-ID: <004d01c18f40$ab8ba860$0273150a@woodstock.lanalyse.com> From: "Ron Hensley" To: "Ty Purcell" , References: <3C2BD195.8090200@crcom.net> Subject: Re: /dev/null Date: Thu, 27 Dec 2001 20:40:40 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 If nothing else works cd /dev rm null ./MAKEDEV all - ----- Original Message ----- From: "Ty Purcell" To: Sent: Thursday, December 27, 2001 8:57 PM Subject: /dev/null > > Somehow I have written over /dev/null... > > How can I restore it to how it was? > > On my other bsd box it has the permissions > > crw-rw-rw > > I tried a reboot, and that replaced it, but > the permissions are wrong, and it is adding files > in instead of throwing them away... > > Thanks. > > Ty Purcell > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBPCvNl1Fb04N5DzUjEQJWdQCePJxiODytyNC2F8PUQpLTE2FTr1cAoOBt PKz69Yzux1TOY0IMbBNjAGG1 =hNsO -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 17:48: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from imo-r01.mx.aol.com (imo-r01.mx.aol.com [152.163.225.97]) by hub.freebsd.org (Postfix) with ESMTP id 26CBB37B416 for ; Thu, 27 Dec 2001 17:48:02 -0800 (PST) Received: from Vitman3852@aol.com by imo-r01.mx.aol.com (mail_out_v31_r1.9.) id n.6b.20105b14 (4258) for ; Thu, 27 Dec 2001 20:47:57 -0500 (EST) From: Vitman3852@aol.com Message-ID: <6b.20105b14.295d294d@aol.com> Date: Thu, 27 Dec 2001 20:47:57 EST Subject: lpd / rc.conf problem To: FreeBSD-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_6b.20105b14.295d294d_boundary" X-Mailer: AOL 6.0 for Windows US sub 10552 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_6b.20105b14.295d294d_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am using "pnm2ppa" and a HP 712C. If I start lpd from a command line, everthing is fine. When lpd is started from rc.conf, everthing is NOT fine. No print. I've been over the man pages and pnm2ppa docs and I haven't found anything. Any ideas? --part1_6b.20105b14.295d294d_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am using "pnm2ppa" and a HP 712C.  If I start lpd from a command line, everthing is fine.  When lpd is started from rc.conf, everthing is NOT fine.  No print.  I've been over the man pages and pnm2ppa docs and I haven't found anything.  

Any ideas?
--part1_6b.20105b14.295d294d_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18: 4:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 444A737B405 for ; Thu, 27 Dec 2001 18:04:11 -0800 (PST) Received: from dialup-63.214.209.154.dial1.philadelphia1.level3.net ([63.214.209.154] helo=sparky) by hawk.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16JmNV-00028A-00; Thu, 27 Dec 2001 18:04:10 -0800 From: Jud To: freebsd-questions@freebsd.org, jacks@sage-american.com Date: Thu, 27 Dec 2001 21:04:17 -0500 X-Priority: 3 (Normal) Reply-To: jud@operamail.com In-Reply-To: <3.0.5.32.20011227122144.01797558@mail.sage-american.com> Message-Id: Subject: Re: MAGIK 1 Chipset MB MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Mailer: Opera 6.0 build 1010 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 12/27/2001 1:21:44 PM, jacks@sage-american.com wrote: >First, a Happy, wealthy & most of all HEALTHY New Year to everyone! > >Second, I'm shopping for a new 1.2-1.4 GHz Motherboard and looking at one >of the makes that I have liked before, however, it now uses a chipset >"MAGiK" I'not familiar with. I'm wondering if anyone has had any experience >with this one using FreeBSD? I'm using 4.4-stable with updates >monthly...4.5 being next. Here's the chipset: > >"...The MAGiK 1 chipset is based on M1647 Northbridge and M1535D+ >Southbridge chips. These chips incorporate funky-fresh features such as >support for DDR memory at PC1600 and PC2100. Throw in ATA/100 and RAID >support and AGP 4X and you've got a chipset that's ready to take on VIA's >and Intel's best....." > >Any feedback appreciated! > >Best regards, >Jack L. Stone, >Server Admin ALi MAGiK chipset performance tests I've seen (using various Windows benchmarks, not *nix) generally lag those of VIA and AMD. For a while, AMD was considered to have the best AMD-DDR chipset, the AMD 761, which incorporates a VIA southbridge. I have a motherboard with this chipset (ASUS A7M266), and I've always been quite happy with it. VIA's chipset had problems when first introduced as the KT266, but reviews of the revised KT266A have been laudatory, generally finding it the best AMD-DDR chipset currently on the market. See, e.g., http://www.anandtech.com/chipsets/showdoc.html?i=1528&p=11 . Again, it's performance with Windows that's being discussed. I haven't run into any *nix-specific performance measures of any of these chipsets, nor have I heard anything good or bad with regard to reliability. Last thought - do you really want to buy a chipset described as having "funky-fresh features?" Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18: 8:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 2EBC737B419 for ; Thu, 27 Dec 2001 18:08:07 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Thu, 27 Dec 2001 21:10:20 -0500 From: "Joe & Fhe Barbish" To: "Joe & Fhe Barbish" Cc: "FBSD Questions" Subject: RE: IPFW rc.firewall Date: Thu, 27 Dec 2001 21:08:03 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG FBSD How-to-do IPFW setup for user ppp dialout to isp http://www.freebsd.org/doc/en_US.ISO8859-1/articles/dialup-firewall/index.ht ml -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Joe & Fhe Barbish Sent: Thursday, December 27, 2001 7:51 PM To: FBSD Questions Subject: IPFW rc.firewall In rc.firewall one can configure the simple type of firewall rule set. It requests you to enter your settings for "your outside network, mask, ip". This looks like it wants a public static ip address from ISP. I logon to my ISP using user ppp and get a dynamic IP address that is different every time. What value am I to enter in these fields so it knows it's dynamic ip address? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:12:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id E122F37B405 for ; Thu, 27 Dec 2001 18:12:39 -0800 (PST) Received: from hotpop.com (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id D675630099 for ; Fri, 28 Dec 2001 02:12:38 +0000 (UTC) Received: from AFI (34.eagle.speede.com [64.39.177.34]) by zagnut.hotpop.com (Postfix) with SMTP id BCFB650021; Fri, 28 Dec 2001 02:12:35 +0000 (UTC) Message-ID: <005401c18f44$fd19d040$2300a8c0@AFI> From: "Dillion Klein" To: , , References: Subject: Re: MAGIK 1 Chipset MB Date: Thu, 27 Dec 2001 21:11:39 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am planning on installing FreeBSD on my desktop machine, which is based on the KT266A chipset -- if it is indeed compatible (anyone?), I would highly recommend it, as I have been running Win98, Win2K Pro, and WinXP Pro on the machine without a single reliabilty concern.... reminds me of the good ol' BX days. As Jud mentioned, ALI is not quite up to VIA and AMD standards, especially in the server market, which most FreeBSD machines fall into. :) BTW, Funky & Fresh brings soaps or laundry detergent to mind. :-D Chow, -D ----- Original Message ----- From: "Jud" To: ; Sent: Thursday, December 27, 2001 9:04 PM Subject: Re: MAGIK 1 Chipset MB > 12/27/2001 1:21:44 PM, jacks@sage-american.com wrote: > > >First, a Happy, wealthy & most of all HEALTHY New Year to > everyone! > > > >Second, I'm shopping for a new 1.2-1.4 GHz Motherboard and looking > at one > >of the makes that I have liked before, however, it now uses a chipset > >"MAGiK" I'not familiar with. I'm wondering if anyone has had any > experience > >with this one using FreeBSD? I'm using 4.4-stable with updates > >monthly...4.5 being next. Here's the chipset: > > > >"...The MAGiK 1 chipset is based on M1647 Northbridge and > M1535D+ > >Southbridge chips. These chips incorporate funky-fresh features such > as > >support for DDR memory at PC1600 and PC2100. Throw in ATA/100 > and RAID > >support and AGP 4X and you've got a chipset that's ready to take on > VIA's > >and Intel's best....." > > > >Any feedback appreciated! > > > >Best regards, > >Jack L. Stone, > >Server Admin > > ALi MAGiK chipset performance tests I've seen (using various Windows > benchmarks, not *nix) generally lag those of VIA and AMD. > > For a while, AMD was considered to have the best AMD-DDR chipset, > the AMD 761, which incorporates a VIA southbridge. I have a > motherboard with this chipset (ASUS A7M266), and I've always been > quite happy with it. > > VIA's chipset had problems when first introduced as the KT266, but > reviews of the revised KT266A have been laudatory, generally finding it > the best AMD-DDR chipset currently on the market. See, e.g., > http://www.anandtech.com/chipsets/showdoc.html?i=1528&p=11 . > Again, it's performance with Windows that's being discussed. > > I haven't run into any *nix-specific performance measures of any of > these chipsets, nor have I heard anything good or bad with regard to > reliability. > > Last thought - do you really want to buy a chipset described as having > "funky-fresh features?" > > Jud > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:16: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 9F0C237B419 for ; Thu, 27 Dec 2001 18:15:57 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Thu, 27 Dec 2001 21:18:11 -0500 From: "Joe & Fhe Barbish" To: "Robin Hall" Cc: "FBSD Questions" Subject: RE: Modem device not configured Date: Thu, 27 Dec 2001 21:15:53 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011228013559.10608.qmail@web20509.mail.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You are the user who the 3.x setserial command was designed for. Your only option is to get a external modem and write a bug report to FBSD. http://www.freebsd.org/send-pr.html -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Robin Hall Sent: Thursday, December 27, 2001 8:36 PM To: Joe & Fhe Barbish Cc: FBSD Questions Subject: RE:Modem device not configured I am sorry I should have said earlier. This modem is not PNP. I can't find anything that is really pertinant on this page. I have an AOpen FM56-ITU/2 modem. Robin E. Hall --- Joe & Fhe Barbish wrote: > You are in a hole caused by very poor management of > FBSD change control. At > 4.0 a change was allowed in to stop a conflict > between isa and pci internal > modem hardware probing. This change for all purposes > closed the door for pci > internal modems. There used to be the pnp, > setserial, and pnpinfo commands > which allowed you to hack around the isa prob > results to get a pci internal > modem to work. Now all that is deactivated and pci > modems users are left out > in the cold. Maybe if enough people write problem > reports this will get > fixed. One would think that 2 years would have been > enough time to get this > fixed since 4.0 came out. If your modem is a isa > modem then you should be > able to get it working following the FAQ at this > url. > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/troubleshoot.html#PNP-N > OT-FOUND > > > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On > Behalf Of Robin Hall > Sent: Thursday, December 27, 2001 7:46 PM > To: freebsd-questions@FreeBSD.org > Subject: Re: device not configured > > Ok I moved the jumpers on my modem to com 2 or cuaa1 > or sio1 whichever it is. > Now when I boot up to install freeBSD 4.4 stable it > gets to the point of > detecting hardware and just stays there. Does BSD > not > like modems? How am I > supposed to install this so that I can use it as a > router with a dialup > connection? Why would it freeze on detecting > hardware > if I have the modem set > to cuaa1? When I was getting it installed it > wouldn't > install kde or any > windowmanager. I did get it to startx with just the > bare bones x. I have 24 > MB of Ram is this enough to use a window manager? > > Robin E. Hall > > On Wed 26 Dec 01 12:10, Andrew C. Hornback wrote: > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On > Behalf Of Robin Hall > > > Sent: Wednesday, December 26, 2001 6:36 AM > > > To: freebsd-questions@FreeBSD.org > > > Subject: RE: device not configured > > > > > > > > > I have an internal AOpen modem. This is a > hardware > > > modem. I have the jumpers set to com 3 in > windows > > > which is ttyS0 in linux and should be cuaa2 in > > > freeBSD. Why isn't this showing up on the > correct > > > port? > > > > > > Robin E. Hall > > > > If you're using the GENERIC kernel, it only > supports devices on classical > > COM 1 and COM 2. To support any other COM ports, > you need to compile a new > > kernel with support for those ports. A look at > the > GENERIC config file > > should of assistance. > > > > --- Andy > > > ===== > > Robin E. Hall > rob33_me@yahoo.com > > > __________________________________________________ > Do You Yahoo!? > Send your FREE holiday greetings online! > http://greetings.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:19:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from stereophonic.noops.org (adsl-63-195-97-84.dsl.snfc21.pacbell.net [63.195.97.84]) by hub.freebsd.org (Postfix) with SMTP id D031737B41A for ; Thu, 27 Dec 2001 18:19:18 -0800 (PST) Received: (qmail 597 invoked by uid 1000); 28 Dec 2001 02:19:19 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 28 Dec 2001 02:19:19 -0000 Date: Thu, 27 Dec 2001 18:19:19 -0800 (PST) From: Thomas Cannon To: Ty Purcell Cc: Subject: Re: /dev/null In-Reply-To: <3C2BD195.8090200@crcom.net> Message-ID: <20011227181704.C479-100000@stereophonic.noops.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You can use /dev/MAKEDEV (As was already posted), or just do it by hand with: cd /dev ; mknod dev c 2 2 root:wheel ; chmod 666 dev MAKEDEV is easier, but knowing how to do it manually might not be bad to know. -tcannon On Thu, 27 Dec 2001, Ty Purcell wrote: > > Somehow I have written over /dev/null... > > How can I restore it to how it was? > > On my other bsd box it has the permissions > > crw-rw-rw > > I tried a reboot, and that replaced it, but > the permissions are wrong, and it is adding files > in instead of throwing them away... > > Thanks. > > Ty Purcell > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:24:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hostname.org (hostname.org [128.121.221.87]) by hub.freebsd.org (Postfix) with ESMTP id 4F6E337B405 for ; Thu, 27 Dec 2001 18:24:39 -0800 (PST) Received: from hostname.org (dl-adsl-C8D44CB9.sao.terra.com.br [200.212.76.185]) by hostname.org (8.11.6) id fBS2Oax84937 for ; Thu, 27 Dec 2001 19:24:37 -0700 (MST) Message-ID: <3C2BD7E1.7060104@hostname.org> Date: Fri, 28 Dec 2001 00:24:33 -0200 From: Fabio Yasusi Yamamoto User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.6+) Gecko/20011220 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Pinnacle's USB tv tunner Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms090209060706090209020908" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a cryptographically signed message in MIME format. --------------ms090209060706090209020908 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit has anybody ever been able to use Pinnacle's USB tv tunner on freebsd? --------------ms090209060706090209020908 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJSDCC AwIwggJroAMCAQICAwZCOjANBgkqhkiG9w0BAQIFADCBkjELMAkGA1UEBhMCWkExFTATBgNV BAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUx HTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVl bWFpbCBSU0EgMjAwMC44LjMwMB4XDTAxMTIwNjE0MTAzMloXDTAyMTIwNjE0MTAzMlowRDEf MB0GA1UEAxMWVGhhd3RlIEZyZWVtYWlsIE1lbWJlcjEhMB8GCSqGSIb3DQEJARYSZmFiaW9A aG9zdG5hbWUub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAv9L2p7dOdoKD OMzu09Z2kCAb+Jgh7ZrvbqX7zMh0veaHp4s/f3Tb0uMhe5J3HqdnPP4ngiHktra/CJirD9oA L40VISjuujcVIwtihtFeefyZ76hB+f+gfLe1tv+fjXrjaNlQcpoOFGgdmW5Mo4ab4m4q4g6x PcSpbGikpIej9TLjeYi3U9JQZZSjX3bWzyR3JxhFvOiXaqyVXrodIqvgJEaP69QjuJg8Y1sf rBjcGJhw7UrYS8vyTbsdnJbTYiCoZSJZXnF3veVbx6Zwb9YVVnODNVHnRAUr/h8bZHAEb+M9 aqGq26aWZcClIqpt/0y1hw+LPVebyRC44FztFoayTQIDAQABoy8wLTAdBgNVHREEFjAUgRJm YWJpb0Bob3N0bmFtZS5vcmcwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQIFAAOBgQCW6Y6w JrgDs9NZVj1/yHeeOlBcbBBMYvhAQWkpY9v3VnYmA/Nf30WwNjgw+jb+u1kdtjZH8K+uJnLp dsgRIEglJPoi2yexq2JLBMtOvX5Hg/AEIcmDNAkU0gepD1mBqU/Rm2fn3E1G2aGiNND7ye6x U8iStvrlxPaf4yK7g2DJ1zCCAwIwggJroAMCAQICAwZCOjANBgkqhkiG9w0BAQIFADCBkjEL MAkGA1UEBhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3du MQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYD VQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAwMC44LjMwMB4XDTAxMTIwNjE0MTAzMloX DTAyMTIwNjE0MTAzMlowRDEfMB0GA1UEAxMWVGhhd3RlIEZyZWVtYWlsIE1lbWJlcjEhMB8G CSqGSIb3DQEJARYSZmFiaW9AaG9zdG5hbWUub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A MIIBCgKCAQEAv9L2p7dOdoKDOMzu09Z2kCAb+Jgh7ZrvbqX7zMh0veaHp4s/f3Tb0uMhe5J3 HqdnPP4ngiHktra/CJirD9oAL40VISjuujcVIwtihtFeefyZ76hB+f+gfLe1tv+fjXrjaNlQ cpoOFGgdmW5Mo4ab4m4q4g6xPcSpbGikpIej9TLjeYi3U9JQZZSjX3bWzyR3JxhFvOiXaqyV XrodIqvgJEaP69QjuJg8Y1sfrBjcGJhw7UrYS8vyTbsdnJbTYiCoZSJZXnF3veVbx6Zwb9YV VnODNVHnRAUr/h8bZHAEb+M9aqGq26aWZcClIqpt/0y1hw+LPVebyRC44FztFoayTQIDAQAB oy8wLTAdBgNVHREEFjAUgRJmYWJpb0Bob3N0bmFtZS5vcmcwDAYDVR0TAQH/BAIwADANBgkq hkiG9w0BAQIFAAOBgQCW6Y6wJrgDs9NZVj1/yHeeOlBcbBBMYvhAQWkpY9v3VnYmA/Nf30Ww Njgw+jb+u1kdtjZH8K+uJnLpdsgRIEglJPoi2yexq2JLBMtOvX5Hg/AEIcmDNAkU0gepD1mB qU/Rm2fn3E1G2aGiNND7ye6xU8iStvrlxPaf4yK7g2DJ1zCCAzgwggKhoAMCAQICEGZFcrfM dPXPY3ZFhNAukQEwDQYJKoZIhvcNAQEEBQAwgdExCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxX ZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEaMBgGA1UEChMRVGhhd3RlIENvbnN1 bHRpbmcxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2aXNpb24xJDAiBgNV BAMTG1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBDQTErMCkGCSqGSIb3DQEJARYccGVyc29u YWwtZnJlZW1haWxAdGhhd3RlLmNvbTAeFw0wMDA4MzAwMDAwMDBaFw0wNDA4MjcyMzU5NTla MIGSMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBl IFRvd24xDzANBgNVBAoTBlRoYXd0ZTEdMBsGA1UECxMUQ2VydGlmaWNhdGUgU2VydmljZXMx KDAmBgNVBAMTH1BlcnNvbmFsIEZyZWVtYWlsIFJTQSAyMDAwLjguMzAwgZ8wDQYJKoZIhvcN AQEBBQADgY0AMIGJAoGBAN4zMqZjxwklRT7SbngnZ4HF2ogZgpcO40QpimM1Km1wPPrcrvfu dG8wvDOQf/k0caCjbZjxw0+iZdsN+kvx1t1hpfmFzVWaNRqdknWoJ67Ycvm6AvbXsJHeHOmr 4BgDqHxDQlBRh4M88Dm0m1SKE4f/s5udSWYALQmJ7JRr6aFpAgMBAAGjTjBMMCkGA1UdEQQi MCCkHjAcMRowGAYDVQQDExFQcml2YXRlTGFiZWwxLTI5NzASBgNVHRMBAf8ECDAGAQH/AgEA MAsGA1UdDwQEAwIBBjANBgkqhkiG9w0BAQQFAAOBgQAxsUtHXfkBceX1U2xdedY9mMAmE2KB IqcS+CKV6BtJtyd7BDm6/ObyJOuR+r3sDSo491BVqGz3Da1MG7wD9LXrokefbKIMWI0xQgkR bLAaadErErJAXWr5edDqLiXdiuT82w0fnQLzWtvKPPZE6iZph39Ins6ln+eE2MliYq0FxjGC AycwggMjAgEBMIGaMIGSMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIw EAYDVQQHEwlDYXBlIFRvd24xDzANBgNVBAoTBlRoYXd0ZTEdMBsGA1UECxMUQ2VydGlmaWNh dGUgU2VydmljZXMxKDAmBgNVBAMTH1BlcnNvbmFsIEZyZWVtYWlsIFJTQSAyMDAwLjguMzAC AwZCOjAJBgUrDgMCGgUAoIIBYTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3 DQEJBTEPFw0wMTEyMjgwMjI0MzNaMCMGCSqGSIb3DQEJBDEWBBQu+Uher0vsQFTGyXuczBNe B6ya0zBSBgkqhkiG9w0BCQ8xRTBDMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggq hkiG9w0DAgIBQDAHBgUrDgMCBzANBggqhkiG9w0DAgIBKDCBrQYLKoZIhvcNAQkQAgsxgZ2g gZowgZIxCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNh cGUgVG93bjEPMA0GA1UEChMGVGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZpY2F0ZSBTZXJ2aWNl czEoMCYGA1UEAxMfUGVyc29uYWwgRnJlZW1haWwgUlNBIDIwMDAuOC4zMAIDBkI6MA0GCSqG SIb3DQEBAQUABIIBABfxgS0hgkaoXXP2iRvJXoF7jtElyuAejBGLdBm/WfKknm3ataKEYVjc Kg4dNSTkQz8I/hwgca4/bdvkn9WF5xcTnbCcYyLCGJ4JzL/d77rIcDRRhNEjE0qdKonGFp1G icmPCq/e5jJ4+/zWATiDyLXQQ1UjXcf3IsDNyQVbFvtaXcq9ba4LkxaRU0pZ8MfsxfAFA3VE +MgPqxErqAIDITdJo28ZLS6YBICM6OSjSvDHM0XmBrq9f8aFU1AlMq7RggBxftxoWd4zucWi Hbvs3yruFgY4XAoCkUfUXof4xY+xdPVv1S2PpvHAL1MDvxQOpIBZD5aflleUZSW2DN1JsfAA AAAAAAA= --------------ms090209060706090209020908-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:35: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from HIVAIDSsearch.com (CPE0040f6740803.cpe.net.cable.rogers.com [24.102.138.247]) by hub.freebsd.org (Postfix) with ESMTP id 244CA37B405 for ; Thu, 27 Dec 2001 18:34:59 -0800 (PST) Received: from mail pickup service by HIVAIDSsearch.com with Microsoft SMTPSVC; Thu, 27 Dec 2001 21:28:29 -0800 From: To: Subject: From M. Callihan Date: Thu, 27 Dec 2001 21:28:28 -0800 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Message-ID: X-OriginalArrivalTime: 28 Dec 2001 05:28:29.0043 (UTC) FILETIME=[7B3ECC30:01C18F60] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG M. Callihan says: I have found that once a given file becomes corrupted md5 will give a different checksum on that file each time it is ran against it. ______________________________________________________________ Anonymous Emailer (used to send this) and other FREEBIES @ http://www.ARGH.ca We support HIV/AIDS Prevention @ http://www.HIVAIDSsearch.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 18:53: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gaia.host4u.net (gaia.host4u.net [209.150.128.48]) by hub.freebsd.org (Postfix) with ESMTP id 8780937B405 for ; Thu, 27 Dec 2001 18:53:07 -0800 (PST) Received: from andre (bricks.fastdns.net [216.71.43.117]) by gaia.host4u.net (8.8.5/8.8.5) with SMTP id UAA05840 for ; Thu, 27 Dec 2001 20:29:28 -0600 Message-ID: <026301c18f4a$7bed84c0$a50410ac@olmct.net> Reply-To: "Andre` Niel Cameron" From: "Andre` Niel Cameron" To: Subject: Help with Compiler path please! Date: Thu, 27 Dec 2001 21:50:55 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2462.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I develop in C/C++ on windows and am banging my head against the wall here in bsd WHY is iostream.h not in the compiler path? How can I set this? Regards, Andre` C. Technical Support Ô¿Ô¬ ---------------------------------------------------------------------------- - Visit our support manual at http://supportmanual.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19: 1:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from catalyst.sasknow.net (catalyst.sasknow.net [207.195.92.130]) by hub.freebsd.org (Postfix) with ESMTP id 2D16D37B417 for ; Thu, 27 Dec 2001 19:01:34 -0800 (PST) Received: from localhost (ryan@localhost) by catalyst.sasknow.net (8.11.6/8.11.6) with ESMTP id fBS31W025067; Thu, 27 Dec 2001 21:01:32 -0600 (CST) (envelope-from ryan@sasknow.com) X-Authentication-Warning: catalyst.sasknow.net: ryan owned process doing -bs Date: Thu, 27 Dec 2001 21:01:32 -0600 (CST) From: Ryan Thompson X-X-Sender: To: Cc: Subject: Re: From M. Callihan In-Reply-To: Message-ID: <20011227205415.N21746-100000@catalyst.sasknow.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG sysop_blast@hotmail.com wrote to freebsd-questions@FreeBSD.ORG: > M. Callihan says: > > I have found that once a given file becomes corrupted md5 will > give a different checksum on that file each time it is ran against > it. Unless I'm reading you wrong, I think you have misunderstood MD5. The MD5 algorithm is designed to always return the same message digest, given the same input. So, if the input (file) changes, the MD5 digest will change as well. If the input file does not change, the MD5 digest will be the same. If the input file becomes corrupted, the MD5 digest will be different than the digest for the un-corrupted version. But calculating MD5 again on the *same* corrupted version will produce the *same* incorrect checksum. In other words, MD5 has no concept of "corruption". It reads bits and calculates a checksum based on the input it observes. If the bits are the same, the checksum will be the same. If the bits are different, the checksum will (almost certainly) be different. Try it... echo foo > bar md5 bar echo led >>bar md5 bar md5 bar (twice.. notice same checksum both times) Clear? - Ryan -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19: 4:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from catalyst.sasknow.net (catalyst.sasknow.net [207.195.92.130]) by hub.freebsd.org (Postfix) with ESMTP id 1351737B405 for ; Thu, 27 Dec 2001 19:04:08 -0800 (PST) Received: from localhost (ryan@localhost) by catalyst.sasknow.net (8.11.6/8.11.6) with ESMTP id fBS33uC25082; Thu, 27 Dec 2001 21:03:56 -0600 (CST) (envelope-from ryan@sasknow.com) X-Authentication-Warning: catalyst.sasknow.net: ryan owned process doing -bs Date: Thu, 27 Dec 2001 21:03:56 -0600 (CST) From: Ryan Thompson X-X-Sender: To: "Alan P. Laudicina" Cc: Ty Purcell , Subject: Re: /dev/null In-Reply-To: <20011227203700.B3117@boredom.org> Message-ID: <20011227210156.W21746-100000@catalyst.sasknow.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Alan P. Laudicina wrote to Ty Purcell: > On Thu, Dec 27, 2001 at 07:57:41PM -0600, Ty Purcell wrote: > > > > Somehow I have written over /dev/null... > > > > How can I restore it to how it was? > > > > On my other bsd box it has the permissions > > > > crw-rw-rw > > cd /dev ; ./MAKEDEV null There is no "null" case in FreeBSD's MAKEDEV. The above command won't work. ./MAKEDEV std will remake null, mem, kmem, random, etc Someone else pointed out the use of mknod, which is a good idea in this case. - Ryan -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:10:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sage-american.com (sage-american.com [216.122.141.44]) by hub.freebsd.org (Postfix) with ESMTP id 0DBD337B416 for ; Thu, 27 Dec 2001 19:10:05 -0800 (PST) Received: from SAGEONE (adsl-64-219-21-136.dsl.crchtx.swbell.net [64.219.21.136]) by sage-american.com (8.9.3/8.9.3) with SMTP id VAA22913; Thu, 27 Dec 2001 21:09:57 -0600 (CST) Message-Id: <3.0.5.32.20011227210955.01797558@mail.sage-american.com> X-Sender: jacks@mail.sage-american.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Thu, 27 Dec 2001 21:09:55 -0600 To: "Dillion Klein" , , From: jacks@sage-american.com Subject: Re: MAGIK 1 Chipset MB In-Reply-To: <005401c18f44$fd19d040$2300a8c0@AFI> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks for the feedback fellas.... as to the "funky", I don't know who writes that stuff... perhaps in Malaysia, they are just getting some of our old comic books.... Picked up one of those funky things to give it a try anyway with the 1.4GHz AMD Athalon XP Processor...XP!? I'll let you know... At 09:11 PM 12.27.2001 -0500, Dillion Klein wrote: >I am planning on installing FreeBSD on my desktop machine, which is based on >the KT266A chipset -- if it is indeed compatible (anyone?), I would highly >recommend it, as I have been running Win98, Win2K Pro, and WinXP Pro on the >machine without a single >reliabilty concern.... reminds me of the good ol' BX days. > >As Jud mentioned, ALI is not quite up to VIA and AMD standards, especially >in the >server market, which most FreeBSD machines fall into. :) > >BTW, Funky & Fresh brings soaps or laundry detergent to mind. :-D > >Chow, > > >-D > > >----- Original Message ----- >From: "Jud" >To: ; >Sent: Thursday, December 27, 2001 9:04 PM >Subject: Re: MAGIK 1 Chipset MB > > >> 12/27/2001 1:21:44 PM, jacks@sage-american.com wrote: >> >> >First, a Happy, wealthy & most of all HEALTHY New Year to >> everyone! >> > >> >Second, I'm shopping for a new 1.2-1.4 GHz Motherboard and looking >> at one >> >of the makes that I have liked before, however, it now uses a chipset >> >"MAGiK" I'not familiar with. I'm wondering if anyone has had any >> experience >> >with this one using FreeBSD? I'm using 4.4-stable with updates >> >monthly...4.5 being next. Here's the chipset: >> > >> >"...The MAGiK 1 chipset is based on M1647 Northbridge and >> M1535D+ >> >Southbridge chips. These chips incorporate funky-fresh features such >> as >> >support for DDR memory at PC1600 and PC2100. Throw in ATA/100 >> and RAID >> >support and AGP 4X and you've got a chipset that's ready to take on >> VIA's >> >and Intel's best....." >> > >> >Any feedback appreciated! >> > >> >Best regards, >> >Jack L. Stone, >> >Server Admin >> >> ALi MAGiK chipset performance tests I've seen (using various Windows >> benchmarks, not *nix) generally lag those of VIA and AMD. >> >> For a while, AMD was considered to have the best AMD-DDR chipset, >> the AMD 761, which incorporates a VIA southbridge. I have a >> motherboard with this chipset (ASUS A7M266), and I've always been >> quite happy with it. >> >> VIA's chipset had problems when first introduced as the KT266, but >> reviews of the revised KT266A have been laudatory, generally finding it >> the best AMD-DDR chipset currently on the market. See, e.g., >> http://www.anandtech.com/chipsets/showdoc.html?i=1528&p=11 . >> Again, it's performance with Windows that's being discussed. >> >> I haven't run into any *nix-specific performance measures of any of >> these chipsets, nor have I heard anything good or bad with regard to >> reliability. >> >> Last thought - do you really want to buy a chipset described as having >> "funky-fresh features?" >> >> Jud >> >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > > > > > Best regards, Jack L. Stone, Server Admin Sage-American http://www.sage-american.com jacks@sage-american.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:23:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from forrie.ne.mediaone.net (forrie.ne.mediaone.net [24.147.156.140]) by hub.freebsd.org (Postfix) with ESMTP id 94EC437B405 for ; Thu, 27 Dec 2001 19:23:24 -0800 (PST) Received: from boom.forrie.com (internal-22.forrie.net. [192.168.1.22]) by forrie.ne.mediaone.net with id fBS3NNd26217 for ; Thu, 27 Dec 2001 22:23:23 -0500 (EST) Message-Id: <5.1.0.14.2.20011227222019.07df7890@192.168.1.1> X-Sender: forrie@192.168.1.1 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 27 Dec 2001 22:23:24 -0500 To: freebsd-questions@freebsd.org From: Forrest Aldrich Subject: ISPQ and FreeBSD ipfw with natd Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-RAVMilter-Version: 8.3.0(snapshot 20010925) (forrie.ne.mediaone.net) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm running FreeBSD-4.5-PRERELEASE,with ipfw and natd. It's an "OPEN" configuration, with a few rules at 1 to deny some networks, pretty simple. On one of my Windows XP machines internally (that's not running firewalling), I'm attempting to use ISQP, but it's not working. I tried monitoring the last rule (65535) to see if the deny/default was being incremented (on the firewall), but it wasn't. The documentation on ISPQ's site says "see your firewall documentation for more info" - :-) Anyways, I wonder if someone here has ran into this problem and found a way to fix it. Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:30:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rover.village.org (rover.bsdimp.com [204.144.255.66]) by hub.freebsd.org (Postfix) with ESMTP id A99C837B417; Thu, 27 Dec 2001 19:30:55 -0800 (PST) Received: from localhost (imp@69.imp.village.org [10.0.0.69]) by rover.village.org (8.11.3/8.11.3) with ESMTP id fBS3Uml18997; Thu, 27 Dec 2001 20:30:48 -0700 (MST) (envelope-from imp@village.org) Date: Thu, 27 Dec 2001 20:30:48 -0700 (MST) Message-Id: <20011227.203048.60327998.imp@village.org> To: suchindryn@mailexpire.com Cc: freebsd-mobile@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Intel PRO/100 CardBus II (32-bit) network card for laptop From: "M. Warner Losh" In-Reply-To: <00e101c18f37$f1093410$0201a8c0@cc1047872c> References: <00e101c18f37$f1093410$0201a8c0@cc1047872c> X-Mailer: Mew version 2.1 on Emacs 21.1 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG : Do I need to compile my own kernel? Or do I have wait for the 5.0 release? You'll need to mfc it yourself (and send me the diffs), run -current or wait for 5.0 release. Warner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:31:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.27in.tv (roc-66-24-112-7.rochester.rr.com [66.24.112.7]) by hub.freebsd.org (Postfix) with ESMTP id B547137B419 for ; Thu, 27 Dec 2001 19:30:59 -0800 (PST) Received: (from root@localhost) by mail.27in.tv (8.11.6/8.11.6) id fBS3UwW85040; Thu, 27 Dec 2001 22:30:58 -0500 (EST) (envelope-from cjm2@earthling.net) Received: from maxpower (trilluser@maxpower.lan.27in.tv [10.0.0.250]) by mail.27in.tv (8.11.6/8.11.6av) with SMTP id fBS3UuM85026; Thu, 27 Dec 2001 22:30:57 -0500 (EST) (envelope-from cjm2@earthling.net) From: "C J Michaels" To: "Scott Nolde" , "Joe & Fhe Barbish" Cc: "FBSD Questions" Subject: RE: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw Date: Thu, 27 Dec 2001 22:32:33 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011227153444.Q504-100000@bsd.smnolde.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I use adzap for squid and it works like a charm, it blocks about 80% of ad banners and it does a decent job of squelching popups. It doesn't actually remove them, but the windows pop-up empty and dont' spawn further popups. It's even in the ports collection now (/usr/ports/www/adzap/) --Chris -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Scott Nolde Sent: Thursday, December 27, 2001 3:37 PM To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw smacked into the keyboard previously by owner-freebsd-questions@FreeBSD.ORG: >Date: Tue, 25 Dec 2001 23:10:07 -0500 >From: Joe & Fhe Barbish >To: FBSD Questions >Subject: Block WWW advertizing banners & auto spawn web pages using > ipfilter or ipfw > >Is there a way using firewalls to identify www advertising Banners & the >auto spawning of wed pages so they can be blocked? > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > Junkbuster works like a charm and is easily configurable. If you've got a bunch of users I'd recommend squid for speed. I highly recommend junkbuster for your home/personal use. Scott Nolde GPG Key 0xD869AB48 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:38:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smnolde.com (att-98-60-141.atl.mediaone.net [24.98.60.141]) by hub.freebsd.org (Postfix) with ESMTP id 1318537B405 for ; Thu, 27 Dec 2001 19:38:19 -0800 (PST) Received: from bsd.smnolde.com ([192.168.10.7] helo=bsd ident=smn@smnolde.com) by smnolde.com with esmtp (Exim 3.30 #1) id 16JnqY-000GKB-00; Thu, 27 Dec 2001 22:38:14 -0500 Date: Thu, 27 Dec 2001 22:38:13 -0500 (EST) From: Scott Nolde To: C J Michaels Cc: Joe & Fhe Barbish , FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw In-Reply-To: Message-ID: <20011227223318.X195-100000@bsd.smnolde.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG smacked into the keyboard previously by C J Michaels: >Date: Thu, 27 Dec 2001 22:32:33 -0500 >From: C J Michaels >To: Scott Nolde , > Joe & Fhe Barbish >Cc: FBSD Questions >Subject: RE: Block WWW advertizing banners & auto spawn web pages using > ipfilter or ipfw > >I use adzap for squid and it works like a charm, it blocks about 80% of ad >banners and it does a decent job of squelching popups. It doesn't actually >remove them, but the windows pop-up empty and dont' spawn further popups. > >It's even in the ports collection now (/usr/ports/www/adzap/) > >--Chris Thanks for the info. I found a very detailed filter file for junkbuster which catches about 98% of the ads from sites in the US. I've been very pleased. I got interested in junkbuster while trying to determine which proxy server to use to bypass the office's proxy... OpenSSH + ${proxy_of_choice} makes a great combination. Incorporating an ad filter to the web proxy cuts down enormously on bandwidth. >-----Original Message----- >From: owner-freebsd-questions@FreeBSD.ORG >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Scott Nolde >Sent: Thursday, December 27, 2001 3:37 PM >To: Joe & Fhe Barbish >Cc: FBSD Questions >Subject: Re: Block WWW advertizing banners & auto spawn web pages using >ipfilter or ipfw > > >smacked into the keyboard previously by owner-freebsd-questions@FreeBSD.ORG: > > >Date: Tue, 25 Dec 2001 23:10:07 -0500 > >From: Joe & Fhe Barbish > >To: FBSD Questions > >Subject: Block WWW advertizing banners & auto spawn web pages using > > ipfilter or ipfw > > > >Is there a way using firewalls to identify www advertising Banners & the > >auto spawning of wed pages so they can be blocked? > > > >Junkbuster works like a charm and is easily configurable. If you've got a >bunch of users I'd recommend squid for speed. > >I highly recommend junkbuster for your home/personal use. > Scott Nolde GPG Key 0xD869AB48 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:40:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-1.enteract.com (smtp-1.enteract.com [207.229.143.33]) by hub.freebsd.org (Postfix) with ESMTP id E1D6937B405 for ; Thu, 27 Dec 2001 19:40:24 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-1.enteract.com (Postfix) with ESMTP id 40A066DF7; Thu, 27 Dec 2001 21:40:24 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBS3gB549803; Thu, 27 Dec 2001 21:42:12 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: Dimitri T Cc: questions@freebsd.org Subject: Re: emulators? References: <20011203071307.79356.qmail@web14702.mail.yahoo.com> From: James McNaughton Date: 27 Dec 2001 21:42:07 -0600 In-Reply-To: <20011203071307.79356.qmail@web14702.mail.yahoo.com> Message-ID: <868zboqacw.fsf@jamestown.21stcentury.net> Lines: 29 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-7 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dimitri T writes: > hi, >=20 > are there any unix emulators for ms windows? >=20 > I have ms-windows boxes and I need to show ppl how a > unix console looks like and how to run basic commands > like ls, cat, cp, mv, rm etc.. >=20 > Any pointers? >=20 > thanks, > dimitri >=20 > ____________________________________________________________ > Do You Yahoo!? > =C1=F0=EF=EA=F4=DE=F3=F4=E5 =F4=E7 =E4=F9=F1=E5=DC=ED @yahoo.gr =E4=E9=E5= =FD=E8=F5=ED=F3=E7 =F3=E1=F2 =F3=F4=EF http://www.otenet.gr >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Maybe your best bet for this whould be Cygwin found at htpp://www/cygwin.org/=20 I use this at work on NT. It has all the basic Unix CLI commands and can even run an X-server. I also installs very easily off the 'net. Best of luck. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:50:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 745DD37B417 for ; Thu, 27 Dec 2001 19:50:40 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Thu, 27 Dec 2001 22:52:54 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: IPFW & type=simple Date: Thu, 27 Dec 2001 22:50:37 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How do I get the simple rule set generated by ipfw rc.firewall written out to a file as add rules ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:54:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 9F77037B62E for ; Thu, 27 Dec 2001 19:54:02 -0800 (PST) Received: from barbish ([63.70.155.123]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Thu, 27 Dec 2001 22:56:17 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: command line web browsers Date: Thu, 27 Dec 2001 22:54:00 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Any suggestions for command line web browsers? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 19:57:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 3FEF937B405 for ; Thu, 27 Dec 2001 19:57:49 -0800 (PST) Received: (qmail 25278 invoked from network); 28 Dec 2001 03:57:42 -0000 Received: from dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.65) by smtp2.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 03:57:42 -0000 Received: (qmail 50845 invoked from network); 28 Dec 2001 03:57:41 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 03:57:41 -0000 From: "Doug Reynolds" To: "FBSD Questions" , "Joe & Fhe Barbish" Date: Thu, 27 Dec 2001 22:59:08 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: command line web browsers Message-Id: <20011228035749.3FEF937B405@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 27 Dec 2001 22:54:00 -0500, Joe & Fhe Barbish wrote: >Any suggestions for command line web browsers? lynx or links two different programs --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20: 0:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-1.enteract.com (smtp-1.enteract.com [207.229.143.33]) by hub.freebsd.org (Postfix) with ESMTP id 9AB4337B405 for ; Thu, 27 Dec 2001 20:00:45 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-1.enteract.com (Postfix) with ESMTP id 0B5ED7447; Thu, 27 Dec 2001 22:00:45 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBS42X149837; Thu, 27 Dec 2001 22:02:34 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: Mathew Kanner Cc: freebsd-questions@freebsd.org Subject: Re: x11 ssh forwarding 'uses different protocol' References: <20011204192024.A92765@cnd.mcgill.ca> From: James McNaughton Date: 27 Dec 2001 22:02:32 -0600 In-Reply-To: <20011204192024.A92765@cnd.mcgill.ca> Message-ID: <863d1wq9ev.fsf@jamestown.21stcentury.net> Lines: 28 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mathew Kanner writes: > Hey Group, > (The search engine seems to be down so I looked manually over > the past few month and couldn't find anything). > > I just reinstalled freebsd in a lab that I support and X11 > forwarding from ssh doesn't seem to work anymore. The client and > servers are 4.4-RELEASE and X is XFree86-4.1.0_10 built out of the > ports about a week or so ago. Each machine has the exact same > version. > > When I try to do X11 forwarding this is what I get (trimmed > verbose output appended) You can see that I have X11 forwarding enable > on both the ssh client and server. > > I now have some very students :( > > Any help would be greatly appreciated. > --Mat > > bash-2.05$ slogin -v XXXX.XXX.XXXXXX.XX Perhaps try slogin -X hostess.with.the.mostest If it worked by default before, then it may have been enabled in a configuration file as per-host X11 access is possible this way. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20: 6:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from linuxmail.touchtunes.com (operator.touchtunes.com [216.94.139.201]) by hub.freebsd.org (Postfix) with ESMTP id 19E6637B416 for ; Thu, 27 Dec 2001 20:06:14 -0800 (PST) Received: from sunder.touchtunes.com (sunder.touchtunes.com [192.168.0.26]) by linuxmail.touchtunes.com (8.9.3/8.8.7) with ESMTP id XAA13336; Thu, 27 Dec 2001 23:06:13 -0500 Received: (from dinjo@localhost) by sunder.touchtunes.com (8.11.6/8.11.6) id fBS469w00310; Thu, 27 Dec 2001 23:06:09 -0500 (EST) (envelope-from dinjo) Date: Thu, 27 Dec 2001 23:06:09 -0500 From: Joel Dinel To: Joe & Fhe Barbish Cc: freebsd-questions@freebsd.org Subject: Re: command line web browsers Message-ID: <20011227230609.A288@sunder.touchtunes.com> Mail-Followup-To: Joel Dinel , Joe & Fhe Barbish , freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Thu, Dec 27, 2001 at 10:54:00PM -0500 X-Useless-Header: Look ma, it's a # sign! X-Operating-System: FreeBSD 4.4-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 10:54:00PM -0500, Joe & Fhe Barbish wrote: > From: "Joe & Fhe Barbish" > To: "FBSD Questions" > Subject: command line web browsers > Date: Thu, 27 Dec 2001 22:54:00 -0500 > X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) > > Any suggestions for command line web browsers? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ---end quoted text--- Links. It does nice coloring, and frames. /usr/ports/www/links -- Joel Dinel TouchTunes Digital Jukebox, Inc. GnuPG key : http://darkhost.mine.nu:81/~joel/mykey.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20:10:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 4DE3137B405 for ; Thu, 27 Dec 2001 20:10:36 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBS4AWR67460; Fri, 28 Dec 2001 05:10:32 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <011e01c18f55$9821ab20$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Simon Siemonsma" Cc: References: <200112270652.HAA12696@smtp.hccnet.nl> <007701c18eaa$7be42ba0$0a00000a@atkielski.com> <200112272001.VAA23530@smtp.hccnet.nl> Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw Date: Fri, 28 Dec 2001 05:10:31 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In my case, I have a local HTTP server (Apache) running, and I point the domains I want to get rid of to that in my DNS, then I set up the HTTP server to just send a blank page for any query for that domain. If I make my DNS authoritative for the domain, it will never attempt to query any other DNS server for the _real_ address of the domain, so it works just fine. The only thing is that you have to gradually add the various domains that are serving ads as you encounter them, and also the domains in question become completely inaccessible (not usually a problem, unless you ever want to visit those domains explicitly). ----- Original Message ----- From: "Simon Siemonsma" To: "Anthony Atkielski" Cc: Sent: Thursday, December 27, 2001 22:06 Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilt er or ipfw > Sounds like a good idea to me, but how does it work? > > Simon Siemonsma > > On Thursday 27 December 2001 07:45, you wrote: > > How about just setting your DNS or hosts file to point to a bogus location > > for domains that serve advertisements? I've done that in the past, thereby > > replacing advertising banners with plain blank boxes (served by my own > > machine, to which I pointed the ad-serving domains). It makes things load > > a lot faster and it's less distracting. > > > > As for pop-ups, unless your browser allows you to selectively disable > > certain Javascript functions (as Konqueror might, but most other browsers > > don't), the only way to get rid of them is to disable Javascript entirely > > in your browser, which has certain other inconveniences (a lot of sites are > > too poorly designed to work without it). > > > > ----- Original Message ----- > > From: "Simon Siemonsma" > > To: "Daniel Thill" > > Cc: > > Sent: Thursday, December 27, 2001 08:57 > > Subject: Re: Block WWW advertizing banners & auto spawn web pages using > > ipfilt er or ipfw > > > > > In KDE it is possible you can set the web browser to dissable pop-ups. > > > Setting -> Configure Konqueror -> Konqueror Browser -> JavaScript. > > > The rest is easy to see. > > > > > > Simon Siemonsma > > > > > > On Thursday 27 December 2001 06:29, you wrote: > > > > > Is there a way using firewalls to identify www advertising Banners & > > > > the > > > > > > > auto spawning of wed pages so they can be blocked? > > > > > > > > It doesn't involve firewalls, but check out the Junkbuster port. It's > > > > an http proxy server that allows you to filter out files by address and > > > > regular expressions. It can only block files though, not filter out > > > > the popups. > > > > > > > > -dan > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20:15:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 3131137B41A for ; Thu, 27 Dec 2001 20:15:39 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBS4FZR67476; Fri, 28 Dec 2001 05:15:35 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <013101c18f56$4ca2c660$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Kevin Golding" Cc: References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227083931.6c291f2c.roddierod@yahoo.com> <010001c18f0f$875d61d0$0a00000a@atkielski.com> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 05:15:35 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Kevin writes: > But an OS with things like file permissions > actually does make life easier. In that case, there is Windows NT/2000, with ACLs far more flexible than any that UNIX offers. But it's very hard to think of a good reason for using file permissions on a single-user system. > The biggest problem my mum has with learning > about Windows is that she's scared silly she'll > delete something important or get infected by > a virus. Current versions of Windows hide anything that you shouldn't delete by default. Antivirus software can avoid viruses, although they can be avoided much more easily by simply not opening mail attachments. > Certainly once I'd set the thing up she'd be > a lot more comfortable playing with something > like FreeBSD ... More correctly, _you_ would be more comfortable to see her playing with FreeBSD; it's not going to matter to her, as long as it works. The only problem is that FreeBSD is much harder to set up and requires far more of your intervention than a Mac or Windows would. > ... the only reason she's still using Windows 98 > is because my dad knows enough about Windows > to be scared by *BSD. It couldn't just be a preference for the mainstream OS, could it? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20:19: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id EE5F037B405 for ; Thu, 27 Dec 2001 20:19:02 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBS4IuR67488; Fri, 28 Dec 2001 05:18:56 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <014001c18f56$c447be00$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Rod Person" , "Jerry McAllister" Cc: References: <011101c18f12$f31aaec0$0a00000a@atkielski.com><200112272027.fBRKR9t17197@clunix.cl.msu.edu> <20011227184810.6b3993fe.roddierod@yahoo.com> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 05:18:53 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Rod writes: > I'm going to go tell my 4 year old daughter > that FreeBSD is to complicated and complex and > worthless on the desktop! And no matter how much > see begs to play mad bomber or draw in the GIMP > or type her letters in Abiword or even browse > to nick.com in Opera that no she can not do it > because you need window or maybe i'll just teach > her to build a server! No need. Just give her Windows and she'll forget FreeBSD. Or, if you hate Microsoft in the way that so many young males do, give her a Mac. The Mac actually wins from an ease-of-use standpoint, but it has other disadvantages that usually make it less desirable than Windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20:21:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 8053D37B416 for ; Thu, 27 Dec 2001 20:21:15 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBS4LAR67502; Fri, 28 Dec 2001 05:21:10 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <014701c18f57$14b29860$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Bob Hall" , "FreeBSD Questions" References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 05:21:10 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bob writes: > In a situation where the maintainer and the user > are different people, the best solution is to use > the OS that the maintainer prefers to maintain. > The maintainer will provide better maintenance and > instruction, and the user will have a more reliable > and easier to use system. In the long run, the user > will prefer the system the maintainer prefers. That seems logical, but the obvious question is why use an OS that requires maintenance in the first place? A reliable OS is generally one that does _not_ require maintenance. And what do you do if you can't be nearby to maintain it? My parents are thousands of miles away. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 20:26: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 2B73F37B405 for ; Thu, 27 Dec 2001 20:26:04 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBS4Q0R67518; Fri, 28 Dec 2001 05:26:00 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <014c01c18f57$c120bf00$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Paul Citro" , References: <20011228001738.32998.qmail@web9106.mail.yahoo.com> Subject: Re: Escape from the Windows Madness Date: Fri, 28 Dec 2001 05:26:00 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Hello, > I am a typical computer user with a Windows 98, AMD > K6 system with 128 megs of ram and a 20 gig. hard > drive. I want to escape from the Microsoft monopoly > and Windows madness. Can I use dsb? That depends on your background. Using UNIX (including FreeBSD) requires a much more extensive background in computers than does Windows. It additionally requires that you be willing to spend far more time tweaking the system to get it up and running and to keep it that way than would be the case with Windows. If you are a computer geek, you might prefer UNIX, particularly if tinkering with a computer is more enjoyable to you than actually using it. If you are not a computer geek, but you still wish to "escape" Windows, you can try a Mac instead. But be careful what you wish for, as the grass on the other side isn't as green as it looks. > Will it be compatible with my computers mother > board, sound card, video card, cd, modem, > Panasonic monitor, Cannon printer, Vivitar scanner? Everything looks okay except the printer and scanner. For those you might need special drivers, and if the required drivers are not available for UNIX, you're out of luck. You should check the Canon and Vivitar Web sites to see if UNIX drivers are available for your printer and scanner. Sometimes generic drivers are available for certain types of devices, but it's best not to count on that. > Can I use my favorite Internet Provider, Bluelight? Just about any ISP is compatible with UNIX, unless there is something wildly proprietary about it (and I'm not aware of any ISPs that are that proprietary). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 21:22:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.mail.pas.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 2547237B417 for ; Thu, 27 Dec 2001 21:22:07 -0800 (PST) Received: from sdn-ar-004dcwashp328.dialsprint.net ([206.133.15.234] helo=moo.holy.cow) by albatross.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16JpT3-0001RJ-00; Thu, 27 Dec 2001 21:22:06 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id 9670C50E29; Fri, 28 Dec 2001 00:23:58 -0500 (EST) Date: Fri, 28 Dec 2001 00:23:58 -0500 From: parv To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: command line web browsers Message-ID: <20011228002358.A69807@moo.holy.cow> Mail-Followup-To: Joe & Fhe Barbish , FBSD Questions References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: ; from barbish@a1poweruser.com on Thu, Dec 27, 2001 at 10:54:00PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG w3m. it handles frames, tables, images (yes images) etc. just fine. -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 21:22:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 858DE37B419 for ; Thu, 27 Dec 2001 21:22:42 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JpTd-00058w-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 05:22:41 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 832CA116E; Fri, 28 Dec 2001 06:22:39 +0100 (CET) Date: Fri, 28 Dec 2001 06:22:39 +0100 From: Cliff Sarginson To: freebsd-questions@FreeBSD.ORG Subject: Re: /dev/null Message-ID: <20011228052239.GA12190@raggedclown.net> References: <3C2BD195.8090200@crcom.net> <20011227181704.C479-100000@stereophonic.noops.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011227181704.C479-100000@stereophonic.noops.org> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 06:19:19PM -0800, Thomas Cannon wrote: > > You can use /dev/MAKEDEV (As was already posted), or just do it by hand > with: > > cd /dev ; mknod dev c 2 2 root:wheel ; chmod 666 dev > > MAKEDEV is easier, but knowing how to do it manually might not be bad to > know. > > -tcannon > > > On Thu, 27 Dec 2001, Ty Purcell wrote: > > > > > Somehow I have written over /dev/null... > > The above is the right way to do it IMHO, remaking all the devices just because one has gone AWOL sounds like a Redmond solution to me :) I am marginally curious how on earth you overwrote /dev/null, I mean you cannot "ovewrite" it, something must have deleted it first. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 21:46:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id EB21D37B419 for ; Thu, 27 Dec 2001 21:46:45 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16Jpqu-0002KD-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 05:46:44 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 3D31E116E; Fri, 28 Dec 2001 06:46:44 +0100 (CET) Date: Fri, 28 Dec 2001 06:46:43 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: dcopserver Message-ID: <20011228054643.GD12190@raggedclown.net> References: <200112260419.fBQ4JF5n014197@bean.epix.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200112260419.fBQ4JF5n014197@bean.epix.net> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 11:19:15PM -0500, Dave Kaufman wrote: > i have the same problem with kde and dcopserver. how do i apply the patch > that will fix this. i have the patch (a .diff file) but don't know what to do > with it. > The solution to all KDE problems is to stop using it ! It is a nightmare. It is nice to look at, even quite nice to use, but it is so fragile. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 21:52:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 37DA137B405 for ; Thu, 27 Dec 2001 21:52:37 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JpwZ-0002Lh-00 for questions@FreeBSD.ORG; Fri, 28 Dec 2001 05:52:36 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id DE9BB116E; Fri, 28 Dec 2001 06:52:34 +0100 (CET) Date: Fri, 28 Dec 2001 06:52:34 +0100 From: Cliff Sarginson To: FBSD Questions Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw Message-ID: <20011228055234.GE12190@raggedclown.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Dec 25, 2001 at 11:10:07PM -0500, Joe & Fhe Barbish wrote: > Is there a way using firewalls to identify www advertising Banners & the > auto spawning of wed pages so they can be blocked? > No. A firewall knows squat about the applications that use the packets it is protecting you against. You need something working at the application/proxy level, not the network level. But the squillion suggestions that you have in this thread tells you how you might do such a thing :) -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:16:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web21209.mail.yahoo.com (web21209.mail.yahoo.com [216.136.175.167]) by hub.freebsd.org (Postfix) with SMTP id 01B8E37B405 for ; Thu, 27 Dec 2001 22:16:50 -0800 (PST) Message-ID: <20011228061649.44623.qmail@web21209.mail.yahoo.com> Received: from [213.29.102.17] by web21209.mail.yahoo.com via HTTP; Thu, 27 Dec 2001 22:16:49 PST Date: Thu, 27 Dec 2001 22:16:49 -0800 (PST) From: sepehr sepehr Subject: have i make the buildworld for any changes in the kernel source files? To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi have i to make buildworld for every change in the kernel source files? thanx __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:23:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id D98C737B405 for ; Thu, 27 Dec 2001 22:23:53 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JqQq-0006Cb-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 06:23:52 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 55864116E; Fri, 28 Dec 2001 07:23:51 +0100 (CET) Date: Fri, 28 Dec 2001 07:23:51 +0100 From: Cliff Sarginson To: freebsd-questions@FreeBSD.ORG Subject: Re: software Message-ID: <20011228062351.GG12190@raggedclown.net> References: <3C29D88C.54F4042F@pathcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3C29D88C.54F4042F@pathcom.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 09:02:52AM -0500, Frank Milner wrote: > Dear FreeBSDm > > This no doubt sounds like a naive question, but will Windows > applications run under FreeBSD? If not, what everyday word processors, > spreadsheets, utlilities, etc., can be used with this operating system? > Perhaps Star Office applications? > > In other words, is FreeBSD suitable in anyway for the standalone > desktop? > My heart sinks when I see this question, there was a debate about it on this list a while ago that went to more than 100 messages in a single thread, forcing me to adopt draconian filtering rules on my email :) The short answer is no you cannot really run Windows apps as such, well maybe you can, there is a project called "wine" that is supposed to allow you to, but last time I looked it was still in Alpha stage and has been for centuries. It is an almost impossibly difficult thing to do since Microsoft specs are secrets, their API documentation lousy, and they change the internal structure of their files with every release of Word etc. There are people who have worked very hard on producing Office type products, many of them are very good. There are word processors, spread sheets, any number of database applications, Gimp (a serious professional level graphics program), integrated desktops, more mail programs than you can shake a stick at etc etc. Much more interesting screen-savers as well :) Look into Gnome, KDE, Abiword, and Staroffice (Staroffice gets a bad press but i quite like it, it does need a beefy machine though). You may find many things that are "meant" for Linux, don't worry about that FreeBSD can run most Linux apps without problem. A lot of the word processors do understand Word formats, which unfortunately is a de-facto document standard in the big bad world. I was using Word 2000 the other day, and this little fellow kept popping up in the bottom of my screen asking me if he needed to help me. Word2000 also seems to like to capitilize words quite irrelevantly to the context. When I was a lad sentences did start with capital letters, but the previous ones usually ended with a full stop. This little rule seems to have been forogtten about in the Redmond hills. Anyway I don't think you will find too much of that in the offerings available. So i would say try it out, you are almost spoilt for choice in fact. I personally like Gnome as a heavyweight and Window Maker as a lightweight (weight here referring to machine resources required). -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:27:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 0513237B405 for ; Thu, 27 Dec 2001 22:27:18 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JqU9-0006DC-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 06:27:17 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 8DBD9116E; Fri, 28 Dec 2001 07:27:15 +0100 (CET) Date: Fri, 28 Dec 2001 07:27:15 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: defragment disk Message-ID: <20011228062715.GH12190@raggedclown.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 09:36:05AM -0500, Fuji Zhang wrote: > seasons greetings! does anybody know what the utility for defragment the > hard disk is? > Not needed, and has not been needed on Unix systems for yonks. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:30:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 1816037B41A for ; Thu, 27 Dec 2001 22:30:16 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JqX1-0006Fy-00 for questions@freebsd.org; Fri, 28 Dec 2001 06:30:15 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 32F7A116E; Fri, 28 Dec 2001 07:30:14 +0100 (CET) Date: Fri, 28 Dec 2001 07:30:14 +0100 From: Cliff Sarginson To: questions@freebsd.org Subject: Re: robust copy program required Message-ID: <20011228063014.GI12190@raggedclown.net> References: <17237838@toto.iv> <15402.40460.473447.960676@guru.mired.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <15402.40460.473447.960676@guru.mired.org> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 10:05:32PM -0600, Mike Meyer wrote: > rene@xs4all.nl types: > > Hi. I have several CDROMs with some scratches etc. > > Have you considered trying to polish the scratches out? I've rescued a > few with toothpaste and elbow grease. Mmm, seriously ? Don't laugh at me, I have a Supertramp CD that I would love to stop my son from putting into a Microwave oven (he assures me the effect is spectacular). -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:34:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 4967237B419 for ; Thu, 27 Dec 2001 22:34:55 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16JqbV-0006R9-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 06:34:53 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 57C2B116E; Fri, 28 Dec 2001 07:34:52 +0100 (CET) Date: Fri, 28 Dec 2001 07:34:52 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Trusted sources listing favoring software for different operations? Message-ID: <20011228063452.GJ12190@raggedclown.net> References: <20011226224613.4fffcc50.johann@broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011226224613.4fffcc50.johann@broadpark.no> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 10:46:13PM +0100, Johann Sharizan wrote: > Does such a thing exist? > > I want to know what's available without having to digg through obsolete > equivalents before finally ending up with it. > Try again. Your question makes no sense. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 22:49:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 0C38737B41A for ; Thu, 27 Dec 2001 22:49:30 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16Jqpc-000365-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 06:49:29 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id D8B19116E; Fri, 28 Dec 2001 07:49:26 +0100 (CET) Date: Fri, 28 Dec 2001 07:49:26 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: windowsXP Product O.D.# Extraction Tool Message-ID: <20011228064926.GK12190@raggedclown.net> References: <8.1eb8da6e.295ba13b@aol.com> <20011226234536.B1084@starpower.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011226234536.B1084@starpower.net> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, Dec 26, 2001 at 11:45:36PM -0500, Bob Hall wrote: > On Wed, Dec 26, 2001 at 04:55:07PM -0500, bbadgger@aol.com wrote: > > I was sent to This address to obtain an extration boot disk to retrive my > > windows XP Product I.D.# which was misplaced or lost. And who exactly sent you ? Mmm, the people on this list are busy with a system called FreeBSD. Ahh, but I think you are wondering are we a bunch of naughty little crackers trying to break the Redmond neck ? What you are asking for is illegal. Try the Microsoft help-desk, $35 per telephone support incident I believe. And some of us do know that Windows XP has a 30 day expiration limit on registering it before it stops working, so I have a pretty damn good idea of what you are trying to do. You want Open Source, use an Open Sourced system :) -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 23:40:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 6AEFD37B405; Thu, 27 Dec 2001 23:40:11 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 26EB4786E3; Fri, 28 Dec 2001 18:10:09 +1030 (CST) Date: Fri, 28 Dec 2001 18:10:09 +1030 From: Greg Lehey To: FreeBSD Questions , FreeBSD Hackers Subject: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228181009.F95692@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.23i Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've been using AMD processors almost exclusively in my main work machines for over 4 years, and I've been very happy with them. I'm currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and an Athlon XP 1700. Last August, though, I bought a machine which gave me a lot of trouble, the Duron 850 mentioned above. I found that it would freeze for no apparent reason. I established that it wasn't the memory by taking the memory of another machine and running it like that; it made no difference. I ended up also changing the motherboard and the processor, but the hangs continued. I could expect a hang within 8 hours when doing 'make release' Just for the fun of it, I tried running Linux on it. I've been running a kernel build and 'make clean' on it now for 36 hours, and it's still running fine. Yesterday some Linux friends of mine came around and looked at it and told me that the Linux kernel I was running on the machine (2.4.16) had had a number of AMD-specific fixes put in. He didn't go into more detail, unfortunately, but I'll ask him again when I have time: it could be something relating to chipset bugs we have seen and fixed. It would help to know, though, if other people are experiencing similar problems. Please let me know if you're having problems with AMD processors which seem to be specific to FreeBSD, especially if they're hangs (i.e. the machine stops reacting, but the display still shows the last state, it doesn't reboot or panic). Information that could be interesting is (here my values): Processor: AMD Duron 850 Motherboard: ECS K7VZA Memory: 1 128 MB SIMM, 100 MHz. Greg -- For more information, see http://www.lemis.com/questions.html Finger grog@lemis.com for PGP public key See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Dec 27 23:48:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.mrf.mail.rcn.net (smtp03.mrf.mail.rcn.net [207.172.4.62]) by hub.freebsd.org (Postfix) with ESMTP id 2D99A37B405 for ; Thu, 27 Dec 2001 23:48:51 -0800 (PST) Received: from 66-44-56-72.s72.tnt2.lnhva.md.dialup.rcn.com ([66.44.56.72] helo=sten.alder.net) by smtp03.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16Jrl3-0005Kk-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 02:48:49 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Fri, 28 Dec 2001 02:47:44 -0500 Date: Fri, 28 Dec 2001 02:47:44 -0500 From: "Bob Hall" To: FreeBSD Questions Subject: Re: Teaching parents UNIX Message-ID: <20011228024744.B1098@starpower.net> Mail-Followup-To: FreeBSD Questions References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <014701c18f57$14b29860$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Fri, Dec 28, 2001 at 05:21:10AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 05:21:10AM +0100, Anthony Atkielski wrote: > Bob writes: > > > In a situation where the maintainer and the user > > are different people, the best solution is to use > > the OS that the maintainer prefers to maintain. > > The maintainer will provide better maintenance and > > instruction, and the user will have a more reliable > > and easier to use system. In the long run, the user > > will prefer the system the maintainer prefers. > > That seems logical, but the obvious question is why use an OS that requires > maintenance in the first place? A reliable OS is generally one that does > _not_ require maintenance. There are no desktop systems that don't require maintenance, if they are getting regular use. New apps have to be installed when users use the systems for new tasks, voltage fluctuations cause damage that has to be repaired, users don't update their virus protection and someone has to run the virus removal software, etc. If the system is Windows, then installation of new programs replaces dlls and cause existing apps to stop functioning, some MS apps cause progressive deterioration in the OS and the OS eventually has to be reinstalled (this happens during Access2000 development in Win2000), and so on. > And what do you do if you can't be nearby to maintain it? My parents are > thousands of miles away. If you recall, this thread was started by someone who will be available to provide his mother and sister with support. Personally, I wouldn't offer to provide free on site support to someone who was thousands of miles away, no matter how much I loved them. If you've committed yourself to doing this, I'm afraid I can't offer any suggestions. I installed NT on my Dad's computer a few months ago, partly because my brother is providing half the support and my brother only has experience with Windows. Dad uses the computer almost exclusively as a communication device, so he doesn't have any strong preferences on OSs. This isn't evidence in support of my claim; it just means that I practice what I preach. Dad's going to be happiest with the system that can be supported by whichever son is available, so that's the system he gets. Actually, Dad would be better off with a Mac, but he won't spend that much money on himself, and my brother and I can't afford to spend it. Taking all of the above into account, my claim should be amended to "When the maintainer is the maintainer because he/she is related to the user, and the user doesn't have a large investment in skills related to one system, the user will prefer the system the maintainer prefers, given the budget constraint." I think that covers the situation described by the original poster, which is the situation I was addressing. Bob Hall -- Know thyself? Absurd direction! Bubbles bear no introspection. -Khushhal Khan Khatak To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 0:34:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom01.kundenserver.de (moutvdom01.kundenserver.de [195.20.224.200]) by hub.freebsd.org (Postfix) with ESMTP id 5919437B419 for ; Fri, 28 Dec 2001 00:34:10 -0800 (PST) Received: from [195.20.224.220] (helo=mrvdom04.kundenserver.de) by moutvdom01.kundenserver.de with esmtp (Exim 2.12 #2) id 16JsSp-0004HV-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 09:34:03 +0100 Received: from pd90172ac.dip.t-dialin.net ([217.1.114.172]) by mrvdom04.kundenserver.de with esmtp (Exim 2.12 #2) id 16JsSp-0004y6-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 09:34:03 +0100 Date: Fri, 28 Dec 2001 08:33:30 +0000 (GMT) From: "P. U. (Uli) Kruppa" X-X-Sender: To: "freebsd-questions@FreeBSD.ORG" Subject: make buildworld fails on -stable Message-ID: <20011228082703.B3597-100000@big> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, today I cvsup'ped my -stable machine (and removed /usr/obj/usr ) and when I typed # make buildworld I got: -------------------------------------------------------------- >>> Rebuilding the temporary build tree -------------------------------------------------------------- rm -rf /usr/obj/usr/src/i386 mkdir -p /usr/obj/usr/src/i386/usr/bin mkdir -p /usr/obj/usr/src/i386/usr/lib/compat/aout mkdir -p /usr/obj/usr/src/i386/usr/games mkdir -p /usr/obj/usr/src/i386/usr/libdata/ldscripts mkdir -p /usr/obj/usr/src/i386/usr/libexec/elf mkdir -p /usr/obj/usr/src/i386/usr/sbin mkdir -p /usr/obj/usr/src/i386/usr/share/misc mkdir -p /usr/obj/usr/src/i386/usr/share/dict mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devascii mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devcp1047 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devdvi mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devhtml mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devkoi8-r mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlatin1 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlbp mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlj4 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devps mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devutf8 mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mdoc mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mm mkdir -p /usr/obj/usr/src/i386/usr/include/arpa mkdir -p /usr/obj/usr/src/i386/usr/include/g++/std mkdir -p /usr/obj/usr/src/i386/usr/include/isc mkdir -p /usr/obj/usr/src/i386/usr/include/objc mkdir -p /usr/obj/usr/src/i386/usr/include/protocols mkdir -p /usr/obj/usr/src/i386/usr/include/readline mkdir -p /usr/obj/usr/src/i386/usr/include/rpc mkdir -p /usr/obj/usr/src/i386/usr/include/rpcsvc mkdir -p /usr/obj/usr/src/i386/usr/include/openssl mkdir -p /usr/obj/usr/src/i386/usr/include/security mkdir -p /usr/obj/usr/src/i386/usr/include/ss ln -sf /usr/src/sys /usr/obj/usr/src/i386 -------------------------------------------------------------- >>> stage 1: bootstrap tools -------------------------------------------------------------- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386 DESTDIR=/usr/obj/usr/src/i386 INSTALL="sh /usr/src/tools/install.sh" MACHINE_ARCH=i386 TOOLS_PREFIX=/usr/obj/usr/src/i386 PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make -f Makefile.inc1 -DBOOTSTRAPPING -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED bootstrap-tools cd /usr/src/games/fortune/strfile; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/games/fortune/strfile created for /usr/src/games/fortune/strfile rm -f .depend mkdep -f .depend -a /usr/src/games/fortune/strfile/strfile.c cd /usr/src/games/fortune/strfile; make _EXTRADEPEND echo strfile: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -Wall -c /usr/src/games/fortune/strfile/strfile.c cc -O -pipe -Wall -static -o strfile strfile.o sh /usr/src/tools/install.sh -c -s -o root -g games -m 555 strfile /usr/obj/usr/src/i386/usr/games cd /usr/src/usr.bin/yacc; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/usr.bin/yacc created for /usr/src/usr.bin/yacc rm -f .depend mkdep -f .depend -a /usr/src/usr.bin/yacc/closure.c /usr/src/usr.bin/yacc/error.c /usr/src/usr.bin/yacc/lalr.c /usr/src/usr.bin/yacc/lr0.c /usr/src/usr.bin/yacc/main.c /usr/src/usr.bin/yacc/mkpar.c /usr/src/usr.bin/yacc/output.c /usr/src/usr.bin/yacc/reader.c /usr/src/usr.bin/yacc/skeleton.c /usr/src/usr.bin/yacc/symtab.c /usr/src/usr.bin/yacc/verbose.c /usr/src/usr.bin/yacc/warshall.c cd /usr/src/usr.bin/yacc; make _EXTRADEPEND echo yacc: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -c /usr/src/usr.bin/yacc/closure.c cc -O -pipe -c /usr/src/usr.bin/yacc/error.c cc -O -pipe -c /usr/src/usr.bin/yacc/lalr.c cc -O -pipe -c /usr/src/usr.bin/yacc/lr0.c cc -O -pipe -c /usr/src/usr.bin/yacc/main.c cc -O -pipe -c /usr/src/usr.bin/yacc/mkpar.c cc -O -pipe -c /usr/src/usr.bin/yacc/output.c cc -O -pipe -c /usr/src/usr.bin/yacc/reader.c cc -O -pipe -c /usr/src/usr.bin/yacc/skeleton.c cc -O -pipe -c /usr/src/usr.bin/yacc/symtab.c cc -O -pipe -c /usr/src/usr.bin/yacc/verbose.c cc -O -pipe -c /usr/src/usr.bin/yacc/warshall.c cc -O -pipe -static -o yacc closure.o error.o lalr.o lr0.o main.o mkpar.o output.o reader.o skeleton.o symtab.o verbose.o warshall.o sh /usr/src/tools/install.sh -c -o root -g wheel -m 555 /usr/src/usr.bin/yacc/yyfix.sh /usr/obj/usr/src/i386/usr/bin/yyfix sh /usr/src/tools/install.sh -c -s -o root -g wheel -m 555 yacc /usr/obj/usr/src/i386/usr/bin /usr/obj/usr/src/i386/usr/bin/byacc -> /usr/obj/usr/src/i386/usr/bin/yacc cd /usr/src/usr.bin/colldef; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/usr.bin/colldef created for /usr/src/usr.bin/colldef yacc -d /usr/src/usr.bin/colldef/parse.y *** Signal 11 Stop in /usr/src/usr.bin/colldef. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas what might have happened or what I could do (besides trying again next year) ? Thanks for your answers. Uli. ************************************ * P. U. Kruppa - Wuppertal * * Germany * * www.pukruppa.de www.2000d.de * ************************************ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 0:35:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 743D737B419 for ; Fri, 28 Dec 2001 00:35:40 -0800 (PST) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 4F63EB3; Thu, 27 Dec 2001 23:35:39 -0900 (AKST) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: daverk@epix.net, freebsd-questions@freebsd.org Subject: re: decopserver Date: Thu, 27 Dec 2001 23:35:39 -0900 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011228083539.4F63EB3@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dave wrote: i have the same problem with kde and dcopserver. how do i apply the patch that will fix this. i have the patch (a .diff file) but don't know what to do with it. thanks Dave If you are using kdelibs-2.2.2 you don't have to patch, it's already been committed. I would suggest upgrading to the latest kde2 port. If you really want to patch kdelibs-2.2.1 email me and I'll show you how to apply the patch. Beech ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 1: 4:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ycn.com (mail.ycn.com [212.88.160.3]) by hub.freebsd.org (Postfix) with ESMTP id 8C4F737B405 for ; Fri, 28 Dec 2001 01:04:37 -0800 (PST) Received: from ws01 (212-88-187-192.ADSL.ycn.com [212.88.187.192]) by mail.ycn.com (8.11.3/8.9.3/Debian 8.9.3-21) with SMTP id fBS97oL24047 for ; Fri, 28 Dec 2001 10:07:53 +0100 From: "Richard Kaestner" To: Subject: newbie's question: which firewall??? Date: Fri, 28 Dec 2001 10:14:57 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG First, it's the time (after watching this list for some time) to say thanks to many helping hands here! Lots of good information found there! I am in the process of switching for the office-equipment from Linux and MS to FreeBSD. As a matter of fact, I can see everyday a lot of attempts to pay a 'visit' to my local network (Nimda, Code Red ...) Still I can smile about - but when will be the first success ...? Can anyone give me some ideas, which firewall to use (ipfw, ipfilter)? Current solution is a NetgearBox (NAT, basic IP filtering) and e-smith (a linux based firewall, gateway, webserver, ... 'all-in-one') acting as gateway to internal network. My intention is: - a dedicated box to block between DMZ and internal network. ipfw or ipfilter ?, Should I do again NAT on this box? - Another dedicated box in DMZ for 'public' access (not really public, but why not representing my company on the net...) Apache, VPN, ssh access from outside (?) This should allow _me_ to access my internal network (without too much headake) Thanks in advance! -- ciao - Richard "you have moved your mouse, please reboot to make this change take effect" Richard Kästner Woerthgasse 17 2500 Baden mailto:richard.kaestner@ycn.com Austria To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 1: 4:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id 012C837B416 for ; Fri, 28 Dec 2001 01:04:51 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16JswO-0007QC-00; Fri, 28 Dec 2001 09:04:36 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16JswH-000M9K-00; Fri, 28 Dec 2001 09:04:29 +0000 Date: Fri, 28 Dec 2001 09:04:29 +0000 From: Ceri To: Thomas Cannon Cc: Ty Purcell , freebsd-questions@FreeBSD.ORG Subject: Re: /dev/null Message-ID: <20011228090429.GA85016@rhadamanth> Mail-Followup-To: Ceri , Thomas Cannon , Ty Purcell , freebsd-questions@FreeBSD.ORG References: <3C2BD195.8090200@crcom.net> <20011227181704.C479-100000@stereophonic.noops.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011227181704.C479-100000@stereophonic.noops.org> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Dec 27, 2001 at 06:19:19PM -0800, Thomas Cannon wrote: > > You can use /dev/MAKEDEV (As was already posted), or just do it by hand > with: > > cd /dev ; mknod dev c 2 2 root:wheel ; chmod 666 dev A better answer, and I know this is what you really meant ;) cd /dev ; mknod null c 2 2 root:wheel ; chmod 666 null Ceri -- keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 1:16: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lucifer.velosystems.net (cx144844-b.pv1.ca.home.com [24.9.137.174]) by hub.freebsd.org (Postfix) with ESMTP id B64EE37B405 for ; Fri, 28 Dec 2001 01:16:06 -0800 (PST) Received: from jeeves.velosystems.net (jeeves.velosystems.net [192.168.1.6]) by lucifer.velosystems.net (Postfix) with SMTP id E85F772684 for ; Fri, 28 Dec 2001 01:16:05 -0800 (PST) Date: Fri, 28 Dec 2001 01:16:05 -0800 From: Steve Wingate To: FreeBSD-questions Subject: Bridging with freebsd/ipfilter Message-Id: <20011228011605.428e8b9a.steve@velosystems.net> Organization: Velosystems X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does FreeBSD support bridging with ipfilter? If so, does it filter on the 'out' direction also? Any gotchas or online tutorials? Most of the Google output seems outdated. I'm looking to move my openbsd/ipfilter box (not a bridge) to a freebsd bridge, but I'd rather stick with ipfilter since I'm comfortable with it and it does what I want. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 1:30:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id DBAB537B405 for ; Fri, 28 Dec 2001 01:30:42 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP1RV202.U75 for ; Fri, 28 Dec 2001 10:33:02 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP1RKB00.HQQ for ; Fri, 28 Dec 2001 10:26:35 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBS9V7h01765 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 10:31:07 +0100 (CET) (envelope-from juli) Date: Fri, 28 Dec 2001 10:31:07 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: Where is pdfjadetex? Message-ID: <20011228103107.A1730@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <44n10680g5.fsf@lowellg.ne.mediaone.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="HcAYCG3uE/tztfnV" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <44n10680g5.fsf@lowellg.ne.mediaone.net>; from lowell@world.std.com on Wed, Dec 26, 2001 at 10:28:58AM -0500 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --HcAYCG3uE/tztfnV Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Dec 26, 2001 at 10:28:58AM -0500, Lowell Gilbert wrote: > juli@merino.net (Julio Merino) writes: >=20 > > I can't find any port containing pdfjadetex... Where is it (port) ? >=20 > On some other OS, I have pdfjadetex, but it's always just a link to > pdftex or (more commonly) pdfetex. Oh, thanks! I've got it working looking at doc.docbook.mk from the FDP. >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --HcAYCG3uE/tztfnV Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8LDvbzz00ZOPKycwRAgTfAJ9LC/L1G89MfLwHIMtBcoRCOxrlPACgnIiz EkZxMzdBOhX7cCEpAuS7guk= =cC49 -----END PGP SIGNATURE----- --HcAYCG3uE/tztfnV-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 2:11:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id CA2A837B419 for ; Fri, 28 Dec 2001 02:11:29 -0800 (PST) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id 99C482EF22; Fri, 28 Dec 2001 12:11:22 +0200 (EET) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.6/8.11.6) with SMTP id fBSADOF29422; Fri, 28 Dec 2001 12:13:29 +0200 (EET) Message-ID: <003301c18f7e$e6758fc0$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: "Jonathan Chen" Cc: References: <20011227162838.S80845-100000@lion.com.ua> <20011228082332.A1625@grimoire.chen.org.nz> Subject: Re: Error from SCSI hard disk, please explaine Date: Fri, 28 Dec 2001 12:06:07 +0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: Jonathan Chen Newsgroups: lucky.freebsd.questions Sent: Thursday, December 27, 2001 10:22 PM Subject: Re: Error from SCSI hard disk, please explaine > On Thu, Dec 27, 2001 at 04:35:13PM +0200, Andrey Simonenko wrote: > > Hi all, > > > > My system (FreeBSD/i386 4.4-STABLE) begins to print following: > > > > Dec 26 02:05:33 lion /kernel: (da0:sym0:0:15:0): READ(06). CDB: 8 1b 60 7f 10 0 > > Dec 26 02:05:35 lion /kernel: (da0:sym0:0:15:0): MEDIUM ERROR info:1b607f asc:11,1 > > Dec 26 02:05:36 lion /kernel: (da0:sym0:0:15:0): Read retries exhausted sks:80,3f > > Either: > 1. Your SCSI cable is loose or not terminated properly. This system was uptime during 18 days and these errors first occurred two days ago. > 2. Your SCSI disk is about to die; you need to replace it > quick smart Today I'll check this HDD with Fuji utility (the service center gave me it). May be this utility gives me more information about problem. Tnanks for your reply. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 2:53:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.port.ru (mx1.port.ru [194.67.57.11]) by hub.freebsd.org (Postfix) with ESMTP id C313A37B405 for ; Fri, 28 Dec 2001 02:53:10 -0800 (PST) Received: from [212.58.122.136] (helo=cybersv) by smtp1.port.ru with esmtp (Exim 3.14 #1) id 16JudL-0007zo-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 13:53:04 +0300 Date: Fri, 28 Dec 2001 14:51:55 +0400 From: CyberSV X-Mailer: The Bat! (v1.53d) Reply-To: CyberSV X-Priority: 3 (Normal) Message-ID: <1055748425.20011228145155@mail.ru> To: freebsd-questions@FreeBSD.ORG Subject: a problem with partition MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all! I`ve a problem with Extended Fat 32 partition. I use two OS on my PC - Win2k Pro (drive C: and D:) and FreeBSD 4.4 RELEASE at the end of HDD space with BootManager. So, drive C: - is primary DOS partition, drive D: - is extended DOS partition. In BSD it looks so: FDISK Partition Editor: Offset Size(Mb) End Name PType Desc Subtype Flags 0 0 62 - 6 unused 0 63 5004 10249469 ad0s1 2 fat 11 10249470 3004 16402354 ad0s2 4 extended 5 16402365 1717 19920599 ad0s3 3 freebsd 165 C 19920600 5 19932191 - 6 unused 0 FreeBSD Disklabel Editor: Part Mount Size Newfs ad0s1 /mnt/win_c 5004Mb msdos ad0s3a / 100Mb ufs ad0s3b 259Mb SWAP ad0s3e /var 20Mb ufs ad0s3f /usr 1338Mb ufs When I`m trying to mount drive (D:) in FreeBSD with command mount -t msdos /dev/ad0s2 /mnt/win_d BSD prints such error message - fixlabel: raw partition size > slice size msdos: /dev/ad0s2: invalid argument Dec 28 13:01:21 CyberSV/kernel: fixlabel: raw partition size > slice size My question: Does the FreeBSD support extended fat partition, and if yes, what is wrong in my actions ? Because both disks C and D perfactly works under Win. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 2:59: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 1FC6737B405; Fri, 28 Dec 2001 02:58:53 -0800 (PST) Received: from colt.ncptiddische.net (ppp-288.wobline.de [212.68.71.9]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBSAwP819290; Fri, 28 Dec 2001 11:58:25 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBSAwRX79386; Fri, 28 Dec 2001 11:58:27 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBSAwK302007; Fri, 28 Dec 2001 11:58:20 +0100 (CET) (envelope-from nils) Date: Fri, 28 Dec 2001 11:57:44 +0100 From: Nils Holland To: Greg Lehey Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228115744.A1908@tisys.org> References: <20011228181009.F95692@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228181009.F95692@monorchid.lemis.com>; from grog@lemis.com on Fri, Dec 28, 2001 at 06:10:09PM +1030 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 11:34AM up 1:05, 1 user, load averages: 0.07, 0.09, 0.03 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey stood up and spoke: > I've been using AMD processors almost exclusively in my main work > machines for over 4 years, and I've been very happy with them. I'm > currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and > an Athlon XP 1700. Last August, though, I bought a machine which gave > me a lot of trouble, the Duron 850 mentioned above. I found that it > would freeze for no apparent reason. I established that it wasn't the > memory by taking the memory of another machine and running it like > that; it made no difference. I ended up also changing the motherboard > and the processor, but the hangs continued. I could expect a hang > within 8 hours when doing 'make release' Using a Duron processor, it is likely that you have the 686B as a Southbridge. I've read a little about the problem with that Southbridge yesterday, and indeed, the machine locking up is one thing that has been reported in conjunction with that chip (although the information on most websites deal with the bahavior of the Southbridge under Windows...) Another thing I read is that for a short time, VIA obviously shipped a few faulty Southbridges that would not work properly except if their core voltage gets increased by avout 0.5 V or something. It's been said that these chips were only sold to OEMs and not landed in boards that were actually sold to customers directly, but who knows! Generally, I've also been using AMD for many years. I think their processors are quite good, but the folks making the chipsets and mainboards are - well - sometimes plain idiots. A lot of stories about problems with Socket A boards can be found all over the web. Here's what I've been through earlier this year: I bought an AMD Athlon 1000 Mhz and a Chaintech board. After assembling the stuff, it just didn't work. Nothing. So I went to the place of purchase and got my mainboard replaced (I kept the CPU). After reassembling my machine with the new board, it *would* work, but after three hours, it would suddenly reboot, and then reboot over and over again when the BIOS passes control to the operating system. After three such reboots, I turned the machine off, and were not able to turn it on again. It just sat there, totally dead. I then got my board exchanged a second time, and the new board's been running fine ever since then. Now, I have found a lot of similar stories on the web. I guess some mainboard manufacturer's (and even VIA as a chipset manufacturer) seem to care very little about quality assurance. That's actually sad: AMD's best processors aren't worth a dime if the components they depend on are cheap crap. As a side note: I have bought numeros board from Epox and never had a single problem with them, so in my opionion, Epox (together with ASUS) is probably one of the companies I would recommend people to buy boards from, but Chaintech and other cheapies should probably be avoided... Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3: 2: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id ABB1737B419 for ; Fri, 28 Dec 2001 03:02:04 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP1W3I01.C9L for ; Fri, 28 Dec 2001 12:04:30 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP1VSS00.NVT for ; Fri, 28 Dec 2001 11:58:04 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBSB2c002201 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 12:02:38 +0100 (CET) (envelope-from juli) Date: Fri, 28 Dec 2001 12:02:38 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: a problem with partition Message-ID: <20011228120238.A2157@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <1055748425.20011228145155@mail.ru> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="FCuugMFkClbJLl1L" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1055748425.20011228145155@mail.ru>; from s_volzhan@mail.ru on Fri, Dec 28, 2001 at 02:51:55PM +0400 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --FCuugMFkClbJLl1L Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 28, 2001 at 02:51:55PM +0400, CyberSV wrote: > When I`m trying to mount drive (D:) in FreeBSD with command > mount -t msdos /dev/ad0s2 /mnt/win_d > BSD prints such error message - > fixlabel: raw partition size > slice size > msdos: /dev/ad0s2: invalid argument > Dec 28 13:01:21 CyberSV/kernel: fixlabel: raw partition size > slice > size >=20 > My question: Does the FreeBSD support extended fat partition, and if > yes, what is wrong in my actions ? Because both disks C and D > perfactly works under Win. You are trying to mount an extended partition, which is impossible. What you really want to do is to mount the logical drives that are _inside_ the extended partition. The "logical" drives are numbered from ad0s5 and so on, so you should do: # mount -t msdos /dev/ad0s5 /mnt/win_d And where I say partition, I mean slice ;) HTH >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --FCuugMFkClbJLl1L Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8LFFOzz00ZOPKycwRAmDCAJ4wfCaUzO1N4SFIsVamBCN+iAVOFgCfbtWR I3y6DumUUNKqY5RJQuQIVWE= =/ELf -----END PGP SIGNATURE----- --FCuugMFkClbJLl1L-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3: 9: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout10.sul.t-online.com (mailout10.sul.t-online.com [194.25.134.21]) by hub.freebsd.org (Postfix) with ESMTP id 60F1E37B417 for ; Fri, 28 Dec 2001 03:09:02 -0800 (PST) Received: from fwd05.sul.t-online.de by mailout10.sul.t-online.de with smtp id 16Jusm-00076C-06; Fri, 28 Dec 2001 12:09:00 +0100 Received: from spirit.corecode.ath.cx (320050403952-0001@[80.128.119.47]) by fmrl05.sul.t-online.com with esmtp id 16Jusj-1YH2dEC; Fri, 28 Dec 2001 12:08:57 +0100 Received: from elevation.zuhause.stoert.net (elevation.zuhause.stoert.net [192.168.66.46]) by spirit.corecode.ath.cx (8.11.6/8.11.6) with ESMTP id fBSB8ug12531; Fri, 28 Dec 2001 12:08:56 +0100 (CET) (envelope-from corecode@elevation.zuhause.stoert.net) Received: (from corecode@localhost) by elevation.zuhause.stoert.net (8.11.6/8.11.6) id fBSB8si00471; Fri, 28 Dec 2001 12:08:54 +0100 (CET) (envelope-from corecode) Date: Fri, 28 Dec 2001 12:08:42 +0100 From: "Simon 'corecode' Schubert" To: "Joe & Fhe Barbish" Cc: questions@FreeBSD.ORG Subject: Re: IPFW rc.firewall Message-Id: <20011228120842.0f3205df.corecode@corecode.ath.cx> In-Reply-To: References: X-Mailer: Sylpheed version 0.6.6claws (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; boundary="=.R:GM1+kF4G3cY," X-Sender: 320050403952-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=.R:GM1+kF4G3cY, Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Thu, 27 Dec 2001 19:50:46 -0500 "Joe & Fhe Barbish" wrote: > In rc.firewall one can configure the simple type of firewall rule set. > It requests you to enter your settings for > "your outside network, mask, ip". This looks like it wants a public > static ip address from ISP. I logon to my ISP using user ppp and get > a dynamic IP address that is different every time. > > What value am I to enter in these fields so it knows it's dynamic ip > address? > you can look at my custom firewall set at http://corecode.ath.cx/tutorials/ cheerz corecode -- /"\ http://corecode.ath.cx/ \ / \ ASCII Ribbon Campaign / \ Against HTML Mail and News --=.R:GM1+kF4G3cY, Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) iD8DBQE8LFLGr5S+dk6z85oRAtwVAJ9NCrTcjPohD/ZcM1a2y3E6e4VJ/ACgrFCz NSZVRm7rN+QNH29Rlwy5AWM= =sBcT -----END PGP SIGNATURE----- --=.R:GM1+kF4G3cY,-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3:17:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout05.sul.t-online.com (mailout05.sul.t-online.com [194.25.134.82]) by hub.freebsd.org (Postfix) with ESMTP id 35E0437B416 for ; Fri, 28 Dec 2001 03:17:39 -0800 (PST) Received: from fwd06.sul.t-online.de by mailout05.sul.t-online.de with smtp id 16Jv11-0003cz-02; Fri, 28 Dec 2001 12:17:31 +0100 Received: from spirit.corecode.ath.cx (320050403952-0001@[80.128.119.47]) by fmrl06.sul.t-online.com with esmtp id 16Jv0l-05bqroC; Fri, 28 Dec 2001 12:17:15 +0100 Received: from elevation.zuhause.stoert.net (elevation.zuhause.stoert.net [192.168.66.46]) by spirit.corecode.ath.cx (8.11.6/8.11.6) with ESMTP id fBSBHEg12586; Fri, 28 Dec 2001 12:17:14 +0100 (CET) (envelope-from corecode@elevation.zuhause.stoert.net) Received: (from corecode@localhost) by elevation.zuhause.stoert.net (8.11.6/8.11.6) id fBSBHDe00523; Fri, 28 Dec 2001 12:17:13 +0100 (CET) (envelope-from corecode) Date: Fri, 28 Dec 2001 12:17:09 +0100 From: "Simon 'corecode' Schubert" To: "Andre` Niel Cameron" Cc: questions@FreeBSD.ORG Subject: Re: Help with Compiler path please! Message-Id: <20011228121709.0a223420.corecode@corecode.ath.cx> In-Reply-To: <026301c18f4a$7bed84c0$a50410ac@olmct.net> References: <026301c18f4a$7bed84c0$a50410ac@olmct.net> X-Mailer: Sylpheed version 0.6.6claws (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; boundary="=.xbpySYS.pcIQ?K" X-Sender: 320050403952-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=.xbpySYS.pcIQ?K Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Thu, 27 Dec 2001 21:50:55 -0500 "Andre` Niel Cameron" wrote: > Hi, > > I develop in C/C++ on windows and am banging my head against the wall > here in bsd WHY is iostream.h not in the compiler path? How can I set > this? shouldn't this be just iostream as in #include ? cheerz corecode -- /"\ http://corecode.ath.cx/ \ / \ ASCII Ribbon Campaign / \ Against HTML Mail and News --=.xbpySYS.pcIQ?K Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) iD8DBQE8LFS5r5S+dk6z85oRAq/xAJ0XOsNAMKZ0vaCLg9gV1MRuu2322wCfUxlB txddCN+516ZbmeQIZd++dEE= =F9pr -----END PGP SIGNATURE----- --=.xbpySYS.pcIQ?K-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3:22:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id BB24637B419 for ; Fri, 28 Dec 2001 03:22:55 -0800 (PST) Received: from dialup-63.214.204.143.dial1.philadelphia1.level3.net ([63.214.204.143] helo=sparky) by falcon.prod.itd.earthlink.net with smtp (Exim 3.33 #1) id 16Jv69-0002sW-00; Fri, 28 Dec 2001 03:22:49 -0800 From: Jud To: questions@freebsd.org, Cliff Sarginson Date: Fri, 28 Dec 2001 06:22:56 -0500 X-Priority: 3 (Normal) Reply-To: jud@operamail.com In-Reply-To: <20011228063014.GI12190@raggedclown.net> Message-Id: <83QK1W7PJ05MKEDVS3V4XZWB0OI387.3c2c5610@sparky> Subject: Re: robust copy program required MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Mailer: Opera 6.01 build 1019c Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 12/28/2001 1:30:14 AM, Cliff Sarginson wrote: >On Wed, Dec 26, 2001 at 10:05:32PM -0600, Mike Meyer wrote: >> rene@xs4all.nl types: >> > Hi. I have several CDROMs with some scratches etc. >> >> Have you considered trying to polish the scratches out? I've rescued a >> few with toothpaste and elbow grease. > >Mmm, seriously ? >Don't laugh at me, I have a Supertramp CD that I would love to stop my >son from putting into a Microwave oven (he assures me the effect is >spectacular). Yeah, there are commercial *mild* abrasives you can buy that are supposedly made especially for CDs, but toothpaste is certainly in the Open Source (in this case, an opened tube - or do you use the pump?) spirit. Of course you'll likely just ruin it anyway, and then your son can demonstrate his home science project. (Tit for tat: Around Easter time, when they start selling Peeps - y'know, those sugar-marshmallowy chick things? - put one in the microwave for about 20 seconds and it becomes The Chicken that Ate New York. Show the kid that the ol' man still knows a thing or 2.;) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3:25:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 892A137B416 for ; Fri, 28 Dec 2001 03:25:20 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBSBPIf14486 for ; Fri, 28 Dec 2001 12:25:19 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122812234503:3842 ; Fri, 28 Dec 2001 12:23:45 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBSBY6X06356 for questions@freebsd.org; Fri, 28 Dec 2001 12:34:06 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Fri, 28 Dec 2001 12:34:06 +0100 From: Roman Neuhauser To: questions@freebsd.org Subject: Re: How To Recursively Search Directory For Text String In Files? Message-ID: <20011228123405.M476@roman.mobil.cz> Mail-Followup-To: questions@freebsd.org References: <011701c18f24$951d3b00$c42a6ba5@lc.ca.gov> Mime-Version: 1.0 In-Reply-To: <011701c18f24$951d3b00$c42a6ba5@lc.ca.gov> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/28/2001 12:23:45 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/28/2001 12:23:51 PM, Serialize complete at 12/28/2001 12:23:51 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > From: "Drew Tomlinson" > To: > Subject: How To Recursively Search Directory For Text String In Files? > Date: Thu, 27 Dec 2001 14:19:42 -0800 > > OK, I am beginning to understand the power of FBSD and am sure this is > possible. I just don't know how to do it. What I want to do is search > all files in my current directory and all the directories below it for a > text string and then know what file(s) contains the string. I > understand that grep will do the search but my knowledge is limited to > "cat file.txt | grep string". How can I construct a command in tcsh to > feed each file to cat and then feed it to grep *AND* know the name of > the file grep found the match? Do I have the right concept? Is there a > better way to accomplish my goal? Hi there, the other suggestions are insanely complicated IMO. All you need is > grep -FIHnir pattern path ^^^^^^- recursive search ||||'-- case insensitive search |||'--- report the line number ||'---- report the file name |'----- ignore binary files '------ the pattern is a fixed string > grep -FIHnir freebsd ~/Mail -- FreeBSD 4.4-STABLE 12:27PM up 1 day, 23:05, 9 users, load averages: 0.01, 0.00, 0.00 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 3:31:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rambo.simx.org (rambo.simx.org [194.17.208.54]) by hub.freebsd.org (Postfix) with ESMTP id AD14C37B416 for ; Fri, 28 Dec 2001 03:31:54 -0800 (PST) Received: from rambo.simx.org (malin.twenty4help.se [195.67.108.195]) by rambo.simx.org (8.11.6/8.11.6) with ESMTP id fBSBVfC11870; Fri, 28 Dec 2001 12:31:42 +0100 (CET) (envelope-from listsub@rambo.simx.org) Message-ID: <3C2C5819.2080501@rambo.simx.org> Date: Fri, 28 Dec 2001 12:31:37 +0100 From: "Roger 'Rocky' Vetterberg" User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: darryl@osborne-ind.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ftp & FreeBSD firewall References: <000001c18f1f$8fa66750$0701a8c0@darryl> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Darryl Hoar wrote: >Greetings, >I built a Freebsd firewall according to the instructions at >http://www.schlacter.net:8500/public/FreeBSD-STABLE_and_IPFILTER.html > >The firewall/router is working fine. > >My network consists mostly of Windows PC's. Since I've put the firewall >in place, they have been unable to use ftp to retrieve files from the web. >I have tried cuteftp, ws_ftp and microsofts ftp clients on these windows >machines. I have set them up to use passive , but the firewall settings >in these clients don't make sense. > >What do I need to do to safely let my Windows users use ftp to retrieve/put >files on the internet ? > Trying settting the clients in passive mode. Where you find the settings depends on the client software, but its usually reffered to as passive transfers, passive mode or PASV for short. I know for a fact that both CuteFTP and WS_FTP supports this option. -- R To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:24: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebsd.dk (fw-rl0.freebsd.dk [212.242.86.114]) by hub.freebsd.org (Postfix) with ESMTP id 3EFF437B417; Fri, 28 Dec 2001 04:24:02 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.11.6/8.11.6) id fBSCNo791738; Fri, 28 Dec 2001 13:23:50 +0100 (CET) (envelope-from sos) From: Søren Schmidt Message-Id: <200112281223.fBSCNo791738@freebsd.dk> Subject: Re: Does FreeBSD have a problem with some AMD processors? In-Reply-To: <20011228181009.F95692@monorchid.lemis.com> To: Greg Lehey Date: Fri, 28 Dec 2001 13:23:50 +0100 (CET) Cc: FreeBSD Questions , FreeBSD Hackers Reply-To: sos@freebsd.dk X-Mailer: ELM [version 2.4ME+ PL94b (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=ISO-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It seems Greg Lehey wrote: > Information that could be interesting is (here my values): > > Processor: AMD Duron 850 > Motherboard: ECS K7VZA > Memory: 1 128 MB SIMM, 100 MHz. What FreeBSD version are you using ? I have put a fix for the 686b southbridge bug in -current, but it is not in -stable yet... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:33:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (Postfix) with ESMTP id F325337B417 for ; Fri, 28 Dec 2001 04:33:53 -0800 (PST) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id HAA80103; Fri, 28 Dec 2001 07:51:24 -0500 (EST) (envelope-from shovey@buffnet.net) Date: Fri, 28 Dec 2001 07:33:44 -0500 (EST) From: Stephen Hovey To: Joe & Fhe Barbish Cc: OutBack Dingo , FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG but then that requires gettin all the users to set up for proxy usage. On Thu, 27 Dec 2001, Joe & Fhe Barbish wrote: > So you don't reinvent the wheel, install the Junkbuster http proxy server > port. It allows you to filter out files by address and regular expressions. > See if it has some kind of database all ready populated, then all you have > to do is get a ip address deny list from some other package maybe for > windows and convert it to Junkbuster format. Junkbuster or some other http > proxy server is the place to start. Do the research and post your results. > Mayby junkbuster has a development that you can join or suggest changes to. > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of OutBack Dingo > Sent: Thursday, December 27, 2001 4:10 PM > To: Stephen Hovey > Cc: Simon Siemonsma; Anthony Atkielski; freebsd-questions@FreeBSD.ORG > Subject: Re: Block WWW advertizing banners & auto spawn web pages > usingipfilt er or ipfw > > Well its a task I think id like to host/take on, now who wants to join > in supporting/coding it ?? > > On Thu, 2001-12-27 at 15:06, Stephen Hovey wrote: > > Someone should start a popup:ip:advert DNS site like the email blackhole > > list! > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:36:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.xs4all.nl (freebie.xs4all.nl [213.84.32.253]) by hub.freebsd.org (Postfix) with ESMTP id 4B4FB37B416; Fri, 28 Dec 2001 04:36:22 -0800 (PST) Received: (from wkb@localhost) by freebie.xs4all.nl (8.11.6/8.11.6) id fBSCaDJ26040; Fri, 28 Dec 2001 13:36:13 +0100 (CET) (envelope-from wkb) Date: Fri, 28 Dec 2001 13:36:13 +0100 From: Wilko Bulte To: Greg Lehey Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228133613.D25749@freebie.xs4all.nl> References: <20011228181009.F95692@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228181009.F95692@monorchid.lemis.com>; from grog@lemis.com on Fri, Dec 28, 2001 at 06:10:09PM +1030 X-OS: FreeBSD 4.5-PRERELEASE X-PGP: finger wilko@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: > I've been using AMD processors almost exclusively in my main work > machines for over 4 years, and I've been very happy with them. I'm > currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and > an Athlon XP 1700. Last August, though, I bought a machine which gave > me a lot of trouble, the Duron 850 mentioned above. I found that it > would freeze for no apparent reason. I established that it wasn't the > memory by taking the memory of another machine and running it like > that; it made no difference. I ended up also changing the motherboard > and the processor, but the hangs continued. I could expect a hang > within 8 hours when doing 'make release' What I noticed for socketA boards is that they tend to be extremely picky about the memory you feed them. And this is not an ElCheapo mainboard, this is an Asus. Asus is my experience has good mainboards. All sorts of weird crashes, sometimes only after hours of buildworld-stress testing. Keeping everything else the same but swapping the memory solved the issue once and for all. Really weird. Wilko -- | / o / /_ _ email: wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, The Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:38:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 312F937B416 for ; Fri, 28 Dec 2001 04:38:09 -0800 (PST) Received: (qmail 28103 invoked from network); 28 Dec 2001 12:38:02 -0000 Received: from dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.65) by smtp2.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 12:38:02 -0000 Received: (qmail 51726 invoked from network); 28 Dec 2001 12:38:01 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 12:38:01 -0000 From: "Doug Reynolds" To: "darryl@osborne-ind.com" , "Roger 'Rocky' Vetterberg" Cc: "freebsd-questions@FreeBSD.ORG" Date: Fri, 28 Dec 2001 07:39:27 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <3C2C5819.2080501@rambo.simx.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: ftp & FreeBSD firewall Message-Id: <20011228123809.312F937B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 12:31:37 +0100, Roger 'Rocky' Vetterberg wrote: >Darryl Hoar wrote: > >>Greetings, >>I built a Freebsd firewall according to the instructions at >>http://www.schlacter.net:8500/public/FreeBSD-STABLE_and_IPFILTER.html >> >>The firewall/router is working fine. >> >>My network consists mostly of Windows PC's. Since I've put the firewall >>in place, they have been unable to use ftp to retrieve files from the web. >>I have tried cuteftp, ws_ftp and microsofts ftp clients on these windows >>machines. I have set them up to use passive , but the firewall settings >>in these clients don't make sense. >> >>What do I need to do to safely let my Windows users use ftp to retrieve/put >>files on the internet ? >> >Trying settting the clients in passive mode. >Where you find the settings depends on the client software, but its >usually reffered to as passive transfers, passive mode or PASV for short. >I know for a fact that both CuteFTP and WS_FTP supports this option. i dont know about ws_ftp or msftp, but leapftp you just click pasv. my guess is that a rule for your firewall is off.. i think ftp sends data back on port20 as well. that could be the problem --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:39:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id C72DE37B41B for ; Fri, 28 Dec 2001 04:39:06 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBSCd2R68505; Fri, 28 Dec 2001 13:39:02 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <01a801c18f9c$a15050b0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Bob Hall" , "FreeBSD Questions" References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 13:39:02 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bob writes: > There are no desktop systems that don't > require maintenance, if they are getting > regular use. I know lots of people who use PCs or Macs daily and never have to do any maintenance at all. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:43:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id B33EB37B417 for ; Fri, 28 Dec 2001 04:43:31 -0800 (PST) Received: (qmail 29216 invoked from network); 28 Dec 2001 12:43:25 -0000 Received: from dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.65) by smtp3.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 12:43:25 -0000 Received: (qmail 51744 invoked from network); 28 Dec 2001 12:43:24 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-65.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 12:43:24 -0000 From: "Doug Reynolds" To: "Greg Lehey" , "Nils Holland" Cc: "FreeBSD Hackers" , "FreeBSD Questions" Date: Fri, 28 Dec 2001 07:44:50 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011228115744.A1908@tisys.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-Id: <20011228124331.B33EB37B417@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 11:57:44 +0100, Nils Holland wrote: >Now, I have found a lot of similar stories on the web. I guess some >mainboard manufacturer's (and even VIA as a chipset manufacturer) seem to >care very little about quality assurance. That's actually sad: AMD's best >processors aren't worth a dime if the components they depend on are cheap >crap. > >As a side note: I have bought numeros board from Epox and never had a >single problem with them, so in my opionion, Epox (together with ASUS) is >probably one of the companies I would recommend people to buy boards from, >but Chaintech and other cheapies should probably be avoided... abit has been extremely good to me. even windows 98 doesn't crash on it!!!! i have the abit kt7a with a 1gHz socket a athlon. I don't like Soyo, FICS, and a bunch of others i cant think of --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 4:59:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cisco.com (sword.cisco.com [161.44.208.100]) by hub.freebsd.org (Postfix) with ESMTP id 0A3D637B417 for ; Fri, 28 Dec 2001 04:59:13 -0800 (PST) Received: from sjt-u10.cisco.com (sjt-u10.cisco.com [10.85.30.63]) by cisco.com (8.8.5-Cisco.1/8.8.8) with ESMTP id HAA07644; Fri, 28 Dec 2001 07:59:12 -0500 (EST) Received: (sjt@localhost) by sjt-u10.cisco.com (8.8.5-Cisco.1/CISCO.WS.1.2) id HAA15529; Fri, 28 Dec 2001 07:59:11 -0500 (EST) Date: Fri, 28 Dec 2001 07:59:11 -0500 From: Steve Tremblett To: Anthony Atkielski Cc: Bob Hall , FreeBSD Questions Subject: Re: Teaching parents UNIX Message-ID: <20011228075911.A15499@sjt-u10.cisco.com> References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> <01a801c18f9c$a15050b0$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <01a801c18f9c$a15050b0$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Fri, Dec 28, 2001 at 01:39:02PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG +---- Anthony Atkielski wrote: | Bob writes: | | > There are no desktop systems that don't | > require maintenance, if they are getting | > regular use. | | I know lots of people who use PCs or Macs daily and never have to do any | maintenance at all. and I know lots of people who aren't patching security holes or updating their virus scanners or defragmenting their hard disks. Your car could be a Porsche or it could be a Lada - both require maintenance. -- Steve Tremblett Cisco Systems To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 5: 3:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cisco.com (sword.cisco.com [161.44.208.100]) by hub.freebsd.org (Postfix) with ESMTP id 516E137B416 for ; Fri, 28 Dec 2001 05:03:48 -0800 (PST) Received: from sjt-u10.cisco.com (sjt-u10.cisco.com [10.85.30.63]) by cisco.com (8.8.5-Cisco.1/8.8.8) with ESMTP id IAA07738; Fri, 28 Dec 2001 08:03:43 -0500 (EST) Received: (sjt@localhost) by sjt-u10.cisco.com (8.8.5-Cisco.1/CISCO.WS.1.2) id IAA15541; Fri, 28 Dec 2001 08:03:43 -0500 (EST) Date: Fri, 28 Dec 2001 08:03:43 -0500 From: Steve Tremblett To: Anthony Atkielski Cc: Marco Radzinschi , FreeBDS-Questions Subject: Re: Teaching parents UNIX Message-ID: <20011228080343.B15499@sjt-u10.cisco.com> References: <20011227151032.T52973-100000@mail.radzinschi.com> <011101c18f12$f31aaec0$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <011101c18f12$f31aaec0$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Thu, Dec 27, 2001 at 09:13:28PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG +---- Anthony Atkielski wrote: | | It's fine if you wish to drive a car with a manual transmission yourself. | However, giving a car with a manual transmission to someone else just | because _you_ happen to like manual transmissions makes no sense at all. It makes perfect sense if that will be the only car in the family. It only costs you a day of instruction and a little practice. -- Steve Tremblett Cisco Systems To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 5:17:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rambo.simx.org (rambo.simx.org [194.17.208.54]) by hub.freebsd.org (Postfix) with ESMTP id 348D937B417 for ; Fri, 28 Dec 2001 05:17:16 -0800 (PST) Received: from rambo.simx.org (malin.twenty4help.se [195.67.108.195]) by rambo.simx.org (8.11.6/8.11.6) with ESMTP id fBSDGiC12730; Fri, 28 Dec 2001 14:16:45 +0100 (CET) (envelope-from listsub@rambo.simx.org) Message-ID: <3C2C70B9.5020602@rambo.simx.org> Date: Fri, 28 Dec 2001 14:16:41 +0100 From: "Roger 'Rocky' Vetterberg" User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: Doug Reynolds Cc: "darryl@osborne-ind.com" , "freebsd-questions@FreeBSD.ORG" Subject: Re: ftp & FreeBSD firewall References: <200112281238.fBSCcBC12375@rambo.simx.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Doug Reynolds wrote: >[snip] > >i dont know about ws_ftp or msftp, but leapftp you just click pasv. my >guess is that a rule for your firewall is off.. i think ftp sends data >back on port20 as well. that could be the problem > Correct me if Im wrong, it has been a while since I studied the FTP protocoll, but if the client uses passive, no data should be sent back at all. The server will open listening ports, and the client will connect to the server. The server should never have to contact the client. -- R To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 5:44: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 8DA3937B506 for ; Fri, 28 Dec 2001 05:43:45 -0800 (PST) Received: (qmail 3317 invoked from network); 28 Dec 2001 13:43:45 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 13:43:45 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Subject: RE: command line web browsers X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 07:43:44 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: command line web browsers Thread-Index: AcGPU5VQGQIGH66JTKW7GmpePFjOeQAUYnng From: "Robert D. Hughes" To: "FBSD Questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you mean text-mode, Lynx is very good, and is installed by default. = It also has the ability to do a fetch from the command line. Lynx-HTTPS = is also available via the ports. There are other command line url = fetchers for various types of files. Check the INDEX file in /usr/ports. -----Original Message----- From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] Sent: Thursday, December 27, 2001 9:54 PM To: FBSD Questions Subject: command line web browsers Any suggestions for command line web browsers? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 5:49:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 4DC9337B420 for ; Fri, 28 Dec 2001 05:49:36 -0800 (PST) Received: (qmail 3331 invoked from network); 28 Dec 2001 13:49:35 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 13:49:35 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: Bridging with freebsd/ipfilter X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 07:49:35 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Bridging with freebsd/ipfilter Thread-Index: AcGPgIBoIk8E+AfrTqiNj00NK7NB1AAJbKNQ From: "Robert D. Hughes" To: "FreeBSD-questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG A Google search on +freebsd +ipfw +bridge should get you a ton of pages on how to do exactly that. But the short answer is yes, you can have an addressless firewall using bridging and filter in both directions. You could also do that using IPF if you don't want to learn ipfw. -----Original Message----- From: Steve Wingate [mailto:steve@velosystems.net] Sent: Friday, December 28, 2001 3:16 AM To: FreeBSD-questions Subject: Bridging with freebsd/ipfilter Does FreeBSD support bridging with ipfilter? If so, does it filter on the 'out' direction also? Any gotchas or online tutorials? Most of the Google output seems outdated. I'm looking to move my openbsd/ipfilter box (not a bridge) to a freebsd bridge, but I'd rather stick with ipfilter since I'm comfortable with it and it does what I want.=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6: 1:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay3-gui.server.ntli.net (relay3-gui.server.ntli.net [194.168.4.200]) by hub.freebsd.org (Postfix) with ESMTP id 57DB337B416 for ; Fri, 28 Dec 2001 06:01:35 -0800 (PST) Received: from pc3-card4-0-cust122.cdf.cable.ntl.com ([62.254.251.122] helo=rhadamanth.private.submonkey.net ident=exim) by relay3-gui.server.ntli.net with esmtp (Exim 3.03 #2) id 16JxYN-0004bZ-00; Fri, 28 Dec 2001 14:00:07 +0000 Received: from setantae by rhadamanth.private.submonkey.net with local (Exim 3.33 #1) id 16JxYA-000BRg-00; Fri, 28 Dec 2001 13:59:54 +0000 Date: Fri, 28 Dec 2001 13:59:54 +0000 From: Ceri To: "Robert D. Hughes" Cc: FBSD Questions Subject: Re: command line web browsers Message-ID: <20011228135954.GA43896@rhadamanth> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 07:43:44AM -0600, Robert D. Hughes wrote: > > From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] > >> Any suggestions for command line web browsers? > If you mean text-mode, Lynx is very good, and is installed by default. It's not installed by default, but it is good. Ceri -- keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6: 3: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 927D137B41B for ; Fri, 28 Dec 2001 06:03:05 -0800 (PST) Received: (qmail 3362 invoked from network); 28 Dec 2001 14:03:04 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 14:03:04 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: command line web browsers X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 08:03:04 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: command line web browsers Thread-Index: AcGPqCjwjYXABrSIQv6og0mMxJgM5gAAA7wQ From: "Robert D. Hughes" To: "Ceri" Cc: "FBSD Questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Isn't it? Its been so long since I installed, I forget. FYI, CVSUP is a wonderful thing if you aren't using it. -----Original Message----- From: Ceri [mailto:setantae@submonkey.net] Sent: Friday, December 28, 2001 8:00 AM To: Robert D. Hughes Cc: FBSD Questions Subject: Re: command line web browsers On Fri, Dec 28, 2001 at 07:43:44AM -0600, Robert D. Hughes wrote: >=20 > From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] >=20 >> Any suggestions for command line web browsers? > If you mean text-mode, Lynx is very good, and is installed by default. It's not installed by default, but it is good. Ceri --=20 keep a mild groove on To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6: 6:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id 571CF37B417 for ; Fri, 28 Dec 2001 06:06:44 -0800 (PST) Received: (qmail 3375 invoked from network); 28 Dec 2001 14:06:43 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 14:06:43 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Subject: RE: newbie's question: which firewall??? X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 08:06:43 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: newbie's question: which firewall??? Thread-Index: AcGPfvvpT8deL7o5RNiw2Cv+j31sywAKYzbw From: "Robert D. Hughes" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Instead, why not yank that Netgear, get some of you money back, and put = in a FreeBSD router/firewall. You can do everything you want there with = much more control. Both IPF and IFPW are very good, though other's = thoughts will differ, I'm sure. -----Original Message----- From: Richard Kaestner [mailto:richard.kaestner@ycn.com] Sent: Friday, December 28, 2001 3:15 AM To: freebsd-questions@FreeBSD.ORG Subject: newbie's question: which firewall??? First, it's the time (after watching this list for some time) to say thanks to many helping hands here! Lots of good information found there! I am in the process of switching for the office-equipment from Linux and MS to FreeBSD. As a matter of fact, I can see everyday a lot of attempts to pay a 'visit' to my local network (Nimda, Code Red ...) Still I can smile about - but when will be the first success ...? Can anyone give me some ideas, which firewall to use (ipfw, ipfilter)? Current solution is a NetgearBox (NAT, basic IP filtering) and e-smith (a linux based firewall, gateway, webserver, ... 'all-in-one') acting as gateway to internal network. My intention is: - a dedicated box to block between DMZ and internal network. ipfw or ipfilter ?, Should I do again NAT on this box? - Another dedicated box in DMZ for 'public' access (not really public, but why not representing my company on the net...) Apache, VPN, ssh access from outside (?) This should allow _me_ to access my internal network (without too much headake) Thanks in advance! -- ciao - Richard "you have moved your mouse, please reboot to make this change take = effect" Richard K=E4stner Woerthgasse 17 2500 Baden mailto:richard.kaestner@ycn.com Austria To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6: 9:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from proxy.teoresi.it (proxy.teoresi.it [151.4.239.35]) by hub.freebsd.org (Postfix) with ESMTP id 9CA2537B416 for ; Fri, 28 Dec 2001 06:09:00 -0800 (PST) Received: from posta.teoresi.it (fw.teoresi.it [151.4.239.34]) by proxy.teoresi.it (Postfix) with ESMTP id F0DB83C92 for ; Fri, 28 Dec 2001 15:08:55 +0100 (CET) Received: from pc_rufus (rufus.teoresi.it [192.168.8.143]) by posta.teoresi.it (8.11.3/8.11.3) with ESMTP id fBSE8u935313 for ; Fri, 28 Dec 2001 15:09:02 +0100 (CET) (envelope-from r.ruffinengo@teoresi.it) From: "Roberto Ruffinengo" To: freebsd-questions@FreeBSD.ORG Date: Fri, 28 Dec 2001 15:08:07 +0100 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: crypted password length (crypt algorithm) Reply-To: r.ruffinengo@teoresi.it Message-ID: <3C2C8AD7.25881.14F63B5@localhost> X-mailer: Pegasus Mail for Win32 (v3.12c) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi everybody, I am running a FreeBSD 4.3 box and i think i have found something interesting. On older version of FreeBSD I had a perl script to verify users login account that was working quite well. I moved it on my 4.3 release and it doesn't work at all. In fact the perl crypt() function generates a crypted password which is 13 char long, while the password in /etc/master.passwd is 34 char long. Here is the piece of code : //first of all read from the user $user and $pass (omissis) //then get the current crypted password ($encstring)=(getpwnam("$user"))[1]; $encpass=substr($encstring,2); // take the salt $salt=substr($encstring,0,2); //crypt the password supplied by the user $newencpass = crypt ($pass,$salt); $encpass e $newencpass are never equal because crypt() will generate an encrypted password of 11 chars long ( + 2 chars for the salt) , while the $encpass will be of 32 char log ( +2 chars for the salt) I had already upgraded my perl release from 5.003 to 5.6.1 but the problem is the same. I am sure this script is working well , and to be really sure I copied an entry from /etc/master.passwd using vipw from an old FreeBSD release and I pasted into my /etc/master.passwd file on my 4.3 box. Here everything is working well. Any help will be really appreciated. __________________________________________________________________________ Roberto Ruffinengo Teoresi s.r.l. Via Perugia, 24 - 10152 Torino (TO) Tel. +39 (0)11 2408000 Fax. +39 (0)11 2408024 e-mail: r.ruffinengo@teoresi.it URL: http://www.teoresi.it __________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:10:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id D2C2B37B41B for ; Fri, 28 Dec 2001 06:10:05 -0800 (PST) Received: (qmail 3384 invoked from network); 28 Dec 2001 14:10:05 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 14:10:05 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: make buildworld fails on -stable X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 08:10:05 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: make buildworld fails on -stable Thread-Index: AcGPeqcsQ1JFdfVBTJOsIQfpea/ztAALmsWg From: "Robert D. Hughes" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This question is better suited for the -stable list. My guess would be that perhaps you got caught during some MFC's from -current to -stable. Try re-cvsuping and see if it goes away. And if you aren't tracking the -stable list, you might want to do so, as they send out announcements whenever the tree is going to become unstable due to merges. -----Original Message----- From: P. U. (Uli) Kruppa [mailto:root@pukruppa.de] Sent: Friday, December 28, 2001 2:34 AM To: freebsd-questions@FreeBSD.ORG Subject: make buildworld fails on -stable Hi, today I cvsup'ped my -stable machine (and removed /usr/obj/usr ) and when I typed # make buildworld I got: -------------------------------------------------------------- >>> Rebuilding the temporary build tree -------------------------------------------------------------- rm -rf /usr/obj/usr/src/i386 mkdir -p /usr/obj/usr/src/i386/usr/bin mkdir -p /usr/obj/usr/src/i386/usr/lib/compat/aout mkdir -p /usr/obj/usr/src/i386/usr/games mkdir -p /usr/obj/usr/src/i386/usr/libdata/ldscripts mkdir -p /usr/obj/usr/src/i386/usr/libexec/elf mkdir -p /usr/obj/usr/src/i386/usr/sbin mkdir -p /usr/obj/usr/src/i386/usr/share/misc mkdir -p /usr/obj/usr/src/i386/usr/share/dict mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devascii mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devcp1047 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devdvi mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devhtml mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devkoi8-r mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlatin1 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlbp mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlj4 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devps mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devutf8 mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mdoc mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mm mkdir -p /usr/obj/usr/src/i386/usr/include/arpa mkdir -p /usr/obj/usr/src/i386/usr/include/g++/std mkdir -p /usr/obj/usr/src/i386/usr/include/isc mkdir -p /usr/obj/usr/src/i386/usr/include/objc mkdir -p /usr/obj/usr/src/i386/usr/include/protocols mkdir -p /usr/obj/usr/src/i386/usr/include/readline mkdir -p /usr/obj/usr/src/i386/usr/include/rpc mkdir -p /usr/obj/usr/src/i386/usr/include/rpcsvc mkdir -p /usr/obj/usr/src/i386/usr/include/openssl mkdir -p /usr/obj/usr/src/i386/usr/include/security mkdir -p /usr/obj/usr/src/i386/usr/include/ss ln -sf /usr/src/sys /usr/obj/usr/src/i386 -------------------------------------------------------------- >>> stage 1: bootstrap tools -------------------------------------------------------------- cd /usr/src; MAKEOBJDIRPREFIX=3D/usr/obj/usr/src/i386 DESTDIR=3D/usr/obj/usr/src/i386 INSTALL=3D"sh = /usr/src/tools/install.sh" MACHINE_ARCH=3Di386 TOOLS_PREFIX=3D/usr/obj/usr/src/i386 PATH=3D/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/= o bj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make -f Makefile.inc1 -DBOOTSTRAPPING -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED bootstrap-tools cd /usr/src/games/fortune/strfile; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/games/fortune/strfile created for /usr/src/games/fortune/strfile rm -f .depend mkdep -f .depend -a /usr/src/games/fortune/strfile/strfile.c cd /usr/src/games/fortune/strfile; make _EXTRADEPEND echo strfile: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -Wall -c /usr/src/games/fortune/strfile/strfile.c cc -O -pipe -Wall -static -o strfile strfile.o sh /usr/src/tools/install.sh -c -s -o root -g games -m 555 strfile /usr/obj/usr/src/i386/usr/games cd /usr/src/usr.bin/yacc; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/usr.bin/yacc created for /usr/src/usr.bin/yacc rm -f .depend mkdep -f .depend -a /usr/src/usr.bin/yacc/closure.c /usr/src/usr.bin/yacc/error.c /usr/src/usr.bin/yacc/lalr.c /usr/src/usr.bin/yacc/lr0.c /usr/src/usr.bin/yacc/main.c /usr/src/usr.bin/yacc/mkpar.c /usr/src/usr.bin/yacc/output.c /usr/src/usr.bin/yacc/reader.c /usr/src/usr.bin/yacc/skeleton.c /usr/src/usr.bin/yacc/symtab.c /usr/src/usr.bin/yacc/verbose.c /usr/src/usr.bin/yacc/warshall.c cd /usr/src/usr.bin/yacc; make _EXTRADEPEND echo yacc: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -c /usr/src/usr.bin/yacc/closure.c cc -O -pipe -c /usr/src/usr.bin/yacc/error.c cc -O -pipe -c /usr/src/usr.bin/yacc/lalr.c cc -O -pipe -c /usr/src/usr.bin/yacc/lr0.c cc -O -pipe -c /usr/src/usr.bin/yacc/main.c cc -O -pipe -c /usr/src/usr.bin/yacc/mkpar.c cc -O -pipe -c /usr/src/usr.bin/yacc/output.c cc -O -pipe -c /usr/src/usr.bin/yacc/reader.c cc -O -pipe -c /usr/src/usr.bin/yacc/skeleton.c cc -O -pipe -c /usr/src/usr.bin/yacc/symtab.c cc -O -pipe -c /usr/src/usr.bin/yacc/verbose.c cc -O -pipe -c /usr/src/usr.bin/yacc/warshall.c cc -O -pipe -static -o yacc closure.o error.o lalr.o lr0.o main.o mkpar.o output.o reader.o skeleton.o symtab.o verbose.o warshall.o sh /usr/src/tools/install.sh -c -o root -g wheel -m 555 /usr/src/usr.bin/yacc/yyfix.sh /usr/obj/usr/src/i386/usr/bin/yyfix sh /usr/src/tools/install.sh -c -s -o root -g wheel -m 555 yacc /usr/obj/usr/src/i386/usr/bin /usr/obj/usr/src/i386/usr/bin/byacc -> /usr/obj/usr/src/i386/usr/bin/yacc cd /usr/src/usr.bin/colldef; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/usr.bin/colldef created for /usr/src/usr.bin/colldef yacc -d /usr/src/usr.bin/colldef/parse.y *** Signal 11 Stop in /usr/src/usr.bin/colldef. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas what might have happened or what I could do (besides trying again next year) ? Thanks for your answers. Uli. ************************************ * P. U. Kruppa - Wuppertal * * Germany * * www.pukruppa.de www.2000d.de * ************************************ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:15:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id A5E2C37B41B for ; Fri, 28 Dec 2001 06:15:17 -0800 (PST) Received: (qmail 3396 invoked from network); 28 Dec 2001 14:15:17 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 14:15:17 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: have i make the buildworld for any changes in the kernel source files? X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 08:15:16 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: have i make the buildworld for any changes in the kernel source files? Thread-Index: AcGPZ3A8vdzxaUSITGCpxCvSAuObWQAQqC0Q From: "Robert D. Hughes" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Try this: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html -----Original Message----- From: sepehr sepehr [mailto:freebsdkernellover@yahoo.com] Sent: Friday, December 28, 2001 12:17 AM To: freebsd-questions@freebsd.org Subject: have i make the buildworld for any changes in the kernel source files? hi have i to make buildworld for every change in the kernel source files? thanx __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:19:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from academy.nsnet.cz (framiex.casablanca.cz [217.11.225.211]) by hub.freebsd.org (Postfix) with SMTP id DDB2137B417 for ; Fri, 28 Dec 2001 06:19:11 -0800 (PST) Received: (qmail 82589 invoked from network); 28 Dec 2001 15:19:01 +0100 Received: from unknown (HELO mikulas.com) (212.65.243.246) by framiex.casablanca.cz with SMTP; 28 Dec 2001 15:19:01 +0100 Message-ID: <3C2C7F71.2050703@mikulas.com> Date: Fri, 28 Dec 2001 15:19:29 +0100 From: Jiri Mikulas Reply-To: jiri@mikulas.com User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:0.9.7) Gecko/20011221 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: WinSCP and shell rights Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all. I have question about SCP (WinSCP). I'm going to learn my normal web users to not use FTP , but WinSCP. Is there any way to not allow them move in whole system ?, to keep user in his home dir and not allow him to 'cd ../' like in FTP - user can list only his homedir and not ../ And second question is how to disable shell (or give him 0 rights for shell) for this user, but allow him to login with SCP .. ? Or is there any other way how to make secure FTP transfer ? Thanks for any help. Have a nice day. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:21:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from spliff.pangeia.com.br (spliff.pangeia.com.br [200.239.53.35]) by hub.freebsd.org (Postfix) with ESMTP id B310A37B417 for ; Fri, 28 Dec 2001 06:21:27 -0800 (PST) Received: by spliff.pangeia.com.br (Postfix, from userid 505) id 8AF253D3E1; Fri, 28 Dec 2001 12:21:26 -0200 (EDT) Date: Fri, 28 Dec 2001 12:21:26 -0200 From: Nelson Murilo To: Roberto Ruffinengo Cc: freebsd-questions@FreeBSD.ORG Subject: Re: crypted password length (crypt algorithm) Message-ID: <20011228122126.H23646@pangeia.com.br> References: <3C2C8AD7.25881.14F63B5@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C2C8AD7.25881.14F63B5@localhost>; from r.ruffinengo@teoresi.it on Fri, Dec 28, 2001 at 03:08:07PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 03:08:07PM +0100, Roberto Ruffinengo wrote: > Hi everybody, > > I am running a FreeBSD 4.3 box > > and i think i have found something interesting. > > On older version of FreeBSD I had a perl script to verify users login account > that was working quite well. > > I moved it on my 4.3 release and it doesn't work at all. > > In fact the perl crypt() function generates a crypted password which is 13 > char long, while the password in /etc/master.passwd is 34 char long. crypt can generate DES or MD5 paswords, if you include '$1$' in salt, crypt generate MD5. Like this: #!/usr/bin/perl # (C) Nelson Murilo - nelson@pangeia.com.br # Fri Dec 28 11:47:20 BRST 2001 $nmor sub salt { local($salt); # initialization local($i, $rand); local(@itoa64) = ( '0' .. '9', 'a' .. 'z', 'A' .. 'Z' ); # 0 .. 63 # to64 for ($i = 0; $i < 27; $i++) { srand(time + $rand + $$); $rand = rand(25*29*17 + $rand); $salt .= $itoa64[$rand & $#itoa64]; } $salt = '$1$'.$salt; return $salt; } ## Main # $cryptpwd = ""; $password = $ARGV[0]; $cryptpwd = crypt($password, &salt) if $password ne ""; print "$cryptpwd\n"; Hope this help, ./nelson -murilo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:23:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from crushed.velvet.net (crushed.velvet.net [62.49.231.23]) by hub.freebsd.org (Postfix) with ESMTP id 5A08137B41B for ; Fri, 28 Dec 2001 06:23:35 -0800 (PST) Received: from aidan (helo=localhost) by crushed.velvet.net with local-esmtp (Exim 3.22 #1) id 16Jxv9-0006xL-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 14:23:39 +0000 Date: Fri, 28 Dec 2001 14:23:38 +0000 (GMT) From: Aidan Skinner Cc: Subject: Re: WinSCP and shell rights In-Reply-To: <3C2C7F71.2050703@mikulas.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001, Jiri Mikulas wrote: > Or is there any other way how to make secure FTP transfer ? You may be better off using sftp, which is a secure ftp protocol, comes with OpenSSH. I don't know if there are any windows clients for sftp although a google for sftp and windows brought up http://www.freessh.org/windows.html - Aidan -- aidan@velvet.net http://www.velvet.net/~aidan/ aim:aidans42 finger for pgp key fingerprint: |----------------------------- 01AA 1594 2DB0 09E3 B850 | On the other side of extreme C2D0 9A2C 4CC9 3EC4 75E1 | stress lies extreme boredom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:29:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pioneernet.net (mail.pioneernet.net [207.115.64.224]) by hub.freebsd.org (Postfix) with ESMTP id AE1EA37B43E for ; Fri, 28 Dec 2001 06:29:11 -0800 (PST) Received: from there [66.114.152.128] by pioneernet.net (SMTPD32-6.06) id A19631B500CA; Fri, 28 Dec 2001 06:28:38 -0800 Content-Type: text/plain; charset="iso-8859-1" From: chip To: Scott Nolde , C J Michaels Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw Date: Fri, 28 Dec 2001 06:29:52 -0800 X-Mailer: KMail [version 1.3] Cc: Joe & Fhe Barbish , FBSD Questions References: <20011227223318.X195-100000@bsd.smnolde.com> In-Reply-To: <20011227223318.X195-100000@bsd.smnolde.com> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200112280628603.SM02384@there> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday 27 December 2001 07:38 pm, Scott Nolde wrote: > smacked into the keyboard previously by C J Michaels: > >Date: Thu, 27 Dec 2001 22:32:33 -0500 > >From: C J Michaels > >To: Scott Nolde , > > Joe & Fhe Barbish > >Cc: FBSD Questions > >Subject: RE: Block WWW advertizing banners & auto spawn web pages usi= ng > > ipfilter or ipfw > > > >I use adzap for squid and it works like a charm, it blocks about 80% = of > > ad banners and it does a decent job of squelching popups. It doesn'= t > > actually remove them, but the windows pop-up empty and dont' spawn > > further popups. > > > >It's even in the ports collection now (/usr/ports/www/adzap/) > > > >--Chris > > Thanks for the info. I found a very detailed filter file for junkbuste= r > which catches about 98% of the ads from sites in the US. I've been ver= y > pleased. I've been quietly following this thread and am interested in this too. Co= uld=20 you share with us what filter file it is that you found? Or where you fou= nd=20 it? Thanks, Chip www.wiegand.org > I got interested in junkbuster while trying to determine which proxy > server to use to bypass the office's proxy... OpenSSH + ${proxy_of_choi= ce} > makes a great combination. Incorporating an ad filter to the web proxy > cuts down enormously on bandwidth. > > >-----Original Message----- > >From: owner-freebsd-questions@FreeBSD.ORG > >[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Scott Nolde > >Sent: Thursday, December 27, 2001 3:37 PM > >To: Joe & Fhe Barbish > >Cc: FBSD Questions > >Subject: Re: Block WWW advertizing banners & auto spawn web pages usi= ng > >ipfilter or ipfw > > > >smacked into the keyboard previously by=20 owner-freebsd-questions@FreeBSD.ORG: > > >Date: Tue, 25 Dec 2001 23:10:07 -0500 > > >From: Joe & Fhe Barbish > > >To: FBSD Questions > > >Subject: Block WWW advertizing banners & auto spawn web pages using > > > ipfilter or ipfw > > > > > >Is there a way using firewalls to identify www advertising Banners = & > > > the auto spawning of wed pages so they can be blocked? > > > >Junkbuster works like a charm and is easily configurable. If you've = got > > a bunch of users I'd recommend squid for speed. > > > >I highly recommend junkbuster for your home/personal use. > > Scott Nolde > GPG Key 0xD869AB48 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 <+><+><+><+><+><+><+><+> Windows 95/NT - 32 bit extensions and a graphical shell for a 16 bit patc= h to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. <+><+><+><+><+><+><+><+> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 6:47:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web14610.mail.yahoo.com (web14610.mail.yahoo.com [216.136.224.242]) by hub.freebsd.org (Postfix) with SMTP id DD70437B41F for ; Fri, 28 Dec 2001 06:47:55 -0800 (PST) Message-ID: <20011228144755.39818.qmail@web14610.mail.yahoo.com> Received: from [66.156.8.71] by web14610.mail.yahoo.com via HTTP; Fri, 28 Dec 2001 06:47:55 PST Date: Fri, 28 Dec 2001 06:47:55 -0800 (PST) From: Jerry Murdock Subject: Re: Bridging with freebsd/ipfilter To: "Robert D. Hughes" , FreeBSD-questions In-Reply-To: <011e01c18fab$a3e29680$0201a8c0@itraktech.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- Robert D. Hughes wrote: > A Google search on +freebsd +ipfw +bridge should get you a ton of pages > on how to do exactly that. But the short answer is yes, you can have an > addressless firewall using bridging and filter in both directions. > Unless something has changed recently, "Out" rules do not work with an IPFW bridge. I beleive this is what he meant. > You could also do that using IPF if you don't want to learn ipfw. > Again, unless something has changed recently, IPF does not work with FBSD bridges, only IPFW. I would be happy on both counts if I'm wrong. Jerry __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:16:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tomts9-srv.bellnexxia.net (tomts9.bellnexxia.net [209.226.175.53]) by hub.freebsd.org (Postfix) with ESMTP id DF5D037B430 for ; Fri, 28 Dec 2001 07:16:42 -0800 (PST) Received: from scaryg.shacknet.nu ([64.231.132.74]) by tomts9-srv.bellnexxia.net (InterMail vM.4.01.03.16 201-229-121-116-20010115) with ESMTP id <20011228151642.CQEU3274.tomts9-srv.bellnexxia.net@scaryg.shacknet.nu> for ; Fri, 28 Dec 2001 10:16:42 -0500 Received: from localhost ([::1] helo=scaryg.shacknet.nu) by scaryg.shacknet.nu with smtp (Exim 3.33 #1) id 16JyiU-0003En-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 10:14:38 -0500 Date: Fri, 28 Dec 2001 10:14:38 -0500 From: ScaryG To: FreeBSD Questions Subject: adduser in a perl script question Message-Id: <20011228101438.187f0eb0.freymann@scaryg.shacknet.nu> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Gang. I'm trying to automate the creation of a new user in a perl5 script. The following does not work: $error = `/usr/sbin/adduser -shell $shell -fullname $name -password $password -username $username -home /home/$name`; This runs as root and the variables are populated in advance. I've read the man(8) page for adduser but it's not helping. I need to set the password which is why I'm not using pw. The man pages for pw talk about a pipe for the password but there are no examples. I'm hoping somebody else out there can toss me a pointer or two to make this work? Thanks in advance... gf To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:18:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 7B53537B429 for ; Fri, 28 Dec 2001 07:18:30 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id EA43F7E88 for ; Fri, 28 Dec 2001 16:18:28 +0100 (MET) Date: Fri, 28 Dec 2001 16:18:28 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Software Recommendations Message-Id: <20011228161828.04659da7.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Are there any websites or something similar out there, listing the most popular software for a task, recommended by experienced gurus? This is my 2nd try posting this question, I hope it made more sense. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:24:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 1D3CB37B423 for ; Fri, 28 Dec 2001 07:24:22 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 3B5458016 for ; Fri, 28 Dec 2001 16:24:21 +0100 (MET) Date: Fri, 28 Dec 2001 16:24:20 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Damn VESA! Where did my 132x43 console video mode go? Message-Id: <20011228162420.6ffe4022.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I used to run 132x34 as console text resolution, though it appeared slightly bended. That was before I switched from the Cirrus Logic GD5430 SVGA controller that came built-in with this Pentium 120, to a ATI Mach64-GU graphics accelerator, which is newer and better equipped, yet it only seems to handle 80x40 -- at least according to 0 (0x000) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k 1 (0x001) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k 2 (0x002) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k 3 (0x003) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k 19 (0x013) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k 20 (0x014) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k 21 (0x015) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k 22 (0x016) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k 23 (0x017) 0x00000001 T 40x25 8x16 0xb8000 32k 32k 0x00000000 32k 24 (0x018) 0x00000001 T 80x25 8x16 0xb8000 32k 32k 0x00000000 32k 30 (0x01e) 0x00000001 T 80x50 8x8 0xb8000 32k 32k 0x00000000 32k 32 (0x020) 0x00000001 T 80x30 8x16 0xb8000 32k 32k 0x00000000 32k 34 (0x022) 0x00000001 T 80x60 8x8 0xb8000 32k 32k 0x00000000 32k 112 (0x070) 0x00000000 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k 113 (0x071) 0x00000001 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k vidcontrol -i mode displays this: mode# flags type size font window linear buffer ------------------------------------------------------------------------------ 0 (0x000) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k 1 (0x001) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k 2 (0x002) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k 3 (0x003) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k 4 (0x004) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k 5 (0x005) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k 6 (0x006) 0x00000003 G 640x200x1 1 8x8 0xb8000 32k 32k 0x00000000 32k 13 (0x00d) 0x00000003 G 320x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k 14 (0x00e) 0x00000003 G 640x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k 16 (0x010) 0x00000003 G 640x350x2 2 8x14 0xa0000 64k 64k 0x00000000 128k 18 (0x012) 0x00000003 G 640x350x4 4 8x14 0xa0000 64k 64k 0x00000000 256k 19 (0x013) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k 20 (0x014) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k 21 (0x015) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k 22 (0x016) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k 23 (0x017) 0x00000001 T 40x25 8x16 0xb8000 32k 32k 0x00000000 32k 24 (0x018) 0x00000001 T 80x25 8x16 0xb8000 32k 32k 0x00000000 32k 26 (0x01a) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k 27 (0x01b) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k 28 (0x01c) 0x00000003 G 320x200x8 1 8x8 0xa0000 64k 64k 0x00000000 64k 30 (0x01e) 0x00000001 T 80x50 8x8 0xb8000 32k 32k 0x00000000 32k 32 (0x020) 0x00000001 T 80x30 8x16 0xb8000 32k 32k 0x00000000 32k 34 (0x022) 0x00000001 T 80x60 8x8 0xb8000 32k 32k 0x00000000 32k 37 (0x025) 0x00000003 G 320x240x8 4 8x8 0xa0000 64k 64k 0x00000000 256k 112 (0x070) 0x00000000 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k 113 (0x071) 0x00000001 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k Now I'm stuck, 132x34 is really a beautiful mode, and 80x40 is hella ugly. Is anyone out there able to help me? Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:28:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 9C40337B41A for ; Fri, 28 Dec 2001 07:28:50 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 77D318016 for ; Fri, 28 Dec 2001 16:28:49 +0100 (MET) Date: Fri, 28 Dec 2001 16:28:48 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: Passive FTP/DCC behind a NAT-modem -- What ports do they go through? Message-Id: <20011228162848.7f49a089.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello again, Anyone here with an Cisco 677i-DIR ADSL-router running NAT between you and you ISP. Which happens to requires a port redirection entry through telnet each time you want to open a new port? All ordinary daemons; SSHD, FTPD, BIND, Apache etc. works great; ftpd/sshd: set nat entry add 10.0.0.2 20-22 0.0.0.0 20-22 tcp www: set nat entry add 10.0.0.2 80 0.0.0.0 80 tcp bind: set nat entry add 10.0.0.2 53 0.0.0.0 53 tcp identd: set nat entry add 10.0.0.2 113 0.0.0.0 113 tcp I'm a bit uncertain, however, when it comes to opening a port or range of ports to get passive FTP mode working on my virtual ProFTPD server (port 2001), as well as DCC in Irssi. I've heard those services go through the IANA-registered ephemeral port-range (49152-65535); sysctl net.inet.ip.portrange.hifirst /net.inet.ip.portrange.hilast So I went ahead opening those ports as well. Just about to close them though. Passive and DCC is not working. Incoming DCC file transfers are, according to Irssi, coming from ports way lower -- i.e. 4384. What do I open and what do I not? Thanks. Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:33:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from humpty.finadmin.virginia.edu (humpty.finadmin.Virginia.EDU [128.143.87.245]) by hub.freebsd.org (Postfix) with ESMTP id 3F35637B423 for ; Fri, 28 Dec 2001 07:33:40 -0800 (PST) Received: (from mrg8n@localhost) by humpty.finadmin.virginia.edu (8.11.1/8.11.1) id fBSFcKS00589 for questions@freebsd.org; Fri, 28 Dec 2001 10:38:20 -0500 (EST) (envelope-from mrg8n) Date: Fri, 28 Dec 2001 10:38:20 -0500 From: Mike Galvez To: questions@freebsd.org Subject: OS hangs when dumping /usr slice Message-ID: <20011228103819.A490@mail.virginia.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD UNIX Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have 4.2 Release running on a Supermicro 370DLE mainboard, SMP kernel, IDE hard drives and tape drive. %df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad0s1a 48M 35M 9.4M 79% / /dev/ad0s1f 9.2G 2.6G 5.8G 31% /usr /dev/ad0s1e 8.7G 102M 7.9G 1% /var procfs 4.0K 4.0K 0B 100% /proc I can dump ad0s1a and ad0s1e to tape with no problem, but dumping ad0s1f causes the system to hang. I thought it might be the tape drive so I installed Amanda and tried backing up to a tape drive on a different machine. I got the same results with Amanda. ____________________________________________________________________ FAILURE AND STRANGE DUMP SUMMARY: humpty ad0s1f lev 0 FAILED [data timeout] humpty ad0s1f lev 0 FAILED [driver says port-dump failed] humpty ad0s1f lev 0 FAILED [dump to tape failed] STATISTICS: Total Full Daily -------- -------- -------- Dump Time (hrs:min) 0:43 0:00 0:00 (0:01 start, 0:41 idle) Output Size (meg) 18.0 0.0 18.0 Original Size (meg) 18.0 0.0 18.0 Avg Compressed Size (%) -- -- -- Tape Used (%) 0.1 0.0 0.1 (level:#disks ...) Filesystems Dumped 2 0 2 (1:2) Avg Dump Rate (k/s) 395.2 -- 395.2 Avg Tp Write Rate (k/s) 1220.6 -- 1220.6 ^L FAILED AND STRANGE DUMP DETAILS: /-- humpty ad0s1f lev 0 FAILED [data timeout] sendbackup: start [humpty.virginia.edu:ad0s1f level 0 datestamp 20011227] | DUMP: Date of this level 0 dump: Thu Dec 27 15:02:49 2001 | DUMP: Date of last level 0 dump: the epoch | DUMP: Dumping /dev/ad0s1f (/usr) to standard output | DUMP: mapping (Pass I) [regular files] | DUMP: mapping (Pass II) [directories] | DUMP: estimated 2885923 tape blocks. | DUMP: dumping (Pass III) [directories] | DUMP: dumping (Pass IV) [regular files] | DUMP: 8.86% done, finished in 0:51 \-------- ^L NOTES: planner: Adding new disk humpty:ad0s1f. ^L DUMP SUMMARY: DUMPER STATS TAPER STATS HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s -------------------------- -------------------------------------- -------------- humpty ad0s1a 1 160 160 -- 0:01 158.8 0:06 25.2 humpty ad0s1e 1 18272 18272 -- 0:46 400.4 0:09 2086.6 humpty ad0s1f 0 FAILED -------------------------------------------- (brought to you by Amanda version 2.3.0.4) I have unmounted and fsck'd ad0s1f and received no unusual output. I'm hoping someone out there can point me in the right direction. Thanks -- Michael Galvez Information Technology Specialist III E-Mail: mrg8n@virginia.edu University of Virginia Office: 804-982-2975 I can't understand why a person will take a year or two to write a novel when he can easily buy one for a few dollars. -- Fred Allen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:35:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id CC89837B421 for ; Fri, 28 Dec 2001 07:35:12 -0800 (PST) Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by mail.broadpark.no (Postfix) with SMTP id 02A65802F for ; Fri, 28 Dec 2001 16:31:22 +0100 (MET) Date: Fri, 28 Dec 2001 16:31:21 +0100 From: Johann Sharizan To: freebsd-questions@freebsd.org Subject: OpenSSH -- Make up your mind! Message-Id: <20011228163121.4df70a62.johann@broadpark.no> X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I recently installed the newest port of OpenSSH for security reasons, after having manually deleted all traces of the old one. After the installation the new config files could be found in /usr/local/etc. SSHD, however, complained it couldn't find sshd_config in /etc/ssh. So I went ahead and moved them all from /usr/local/etc to /etc/ssh. But now, SSHD brings me this output, requiring a non-existent file: Could not load host key: /etc/ssh/ssh_host_rsa_key OpenSSH did generate all the nessecary keys and config files upon installation; (16:30) [johann@ninja] [/etc/ssh] > ls ssh_config ssh_host_dsa_key.pub ssh_host_key.pub ssh_host_dsa_key ssh_host_key sshd_config So what does SSHD need an RSA key when it already has a DSA one? Again, I'm utterly confused. Regards, Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:44:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.delfi.lv (smtp.delfi.lv [195.2.96.248]) by hub.freebsd.org (Postfix) with ESMTP id 1B40837B425 for ; Fri, 28 Dec 2001 07:44:53 -0800 (PST) Received: from webmail (webmail.delfi.lv [195.2.96.247]) by smtp.delfi.lv (8.8.8/8.8.6/8.8.0) with SMTP id fBSFihk25254 for ; Fri, 28 Dec 2001 17:44:44 +0200 Message-Id: <200112281544.fBSFihk25254@smtp.delfi.lv> To: questions@freebsd.org From: uwi@mail.delfi.lv Subject: VMware Tools for Windows Guests Date: Fri, 28 Dec 2001 15:44:44 GMT X-Mailer: Endymion MailMan Standard Edition v3.0.26 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG where can I get it? Im using FreeBSD 4.4, vmware2. thanks alot. --uwi mAm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:50:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clientmail.ehsrealtime.com (eris.ehsrealtime.com [213.52.146.130]) by hub.freebsd.org (Postfix) with ESMTP id E3F2537B425 for ; Fri, 28 Dec 2001 07:50:22 -0800 (PST) Received: from cyclops.ehsrealtime.com ([213.52.146.194]) by clientmail.ehsrealtime.com with esmtp (Exim 3.33 #2) id 16Jyrq-000O60-01 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 15:24:18 +0000 Received: from byrons (helo=localhost) by cyclops.ehsrealtime.com with local-esmtp (Exim 3.33 #1) id 16JzH1-000Kzc-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 15:50:19 +0000 Date: Fri, 28 Dec 2001 15:50:18 +0000 (GMT) From: Byron Schlemmer X-X-Sender: byrons@cyclops.ehsrealtime.com To: freebsd-questions@freebsd.org Subject: Compiling Galeon Message-ID: <20011228145333.O80509-100000@cyclops.ehsrealtime.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Folks, Has anybody else had problems compiling Galeon on 4.4-Stable lately? I get the following when trying to compile /usr/ports/www/galeon : EventContext.cpp: In method `nsresult EventContext::GetMouseEventInfo(WrapperMouseEventInfo *)': EventContext.cpp:468: no matching function for call to `nsIDOMMouseEvent::GetOriginalTarget (nsGetterAddRefs)' EventContext.cpp:455: warning: `nsresult result' might be used uninitialized in this function *** Error code 1 I've search a few lists and there is mention of compiling Galeon with the flag --enable-cpp-rtti, I've tried with it enabled and disabled. I've tried enabling/disabling compilation with embedded mozilla aswell. Still no joy. There is also mention of it not compiling with gcc 2.95, is that still true? Is there anything obvious that I'm missing? Thanks, -byron -- "Those who do not understand Unix are condemned to reinvent it, poorly." -- Henry Spencer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 7:58:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pooh.noc.u-net.net (pooh.noc.u-net.net [195.102.252.112]) by hub.freebsd.org (Postfix) with ESMTP id 6234137B422 for ; Fri, 28 Dec 2001 07:58:35 -0800 (PST) Received: from pooh.noc.u-net.net ([195.102.252.112] helo=there) by pooh.noc.u-net.net with smtp (Exim 3.22 #1) id 16JzOz-0005sz-00; Fri, 28 Dec 2001 15:58:33 +0000 Content-Type: text/plain; charset="iso-8859-1" From: Peter McGarvey Reply-To: pmcgarvey@vianetworks.co.uk Organization: VIA NETdotWORKS To: Johann Sharizan , freebsd-questions@freebsd.org Subject: Re: OpenSSH -- Make up your mind! Date: Fri, 28 Dec 2001 15:58:26 +0000 X-Mailer: KMail [version 1.3] References: <20011228163121.4df70a62.johann@broadpark.no> In-Reply-To: <20011228163121.4df70a62.johann@broadpark.no> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: X-EXIM-FILTER: PASS-s02 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > OpenSSH did generate all the nessecary keys and config files upon > installation; Errm, no it didn't. Hence the error message: Could not load host key: /etc/ssh/ssh_host_rsa_key I've recently upgrated to OpenSSH_3.0.2p1 on about 20 boxen, and had the same problem. From /usr/local/etc/sshd_config: # HostKey for protocol version 1 HostKey /usr/local/etc/ssh_host_key # HostKeys for protocol version 2 HostKey /usr/local/etc/ssh_host_rsa_key HostKey /usr/local/etc/ssh_host_dsa_key The file /usr/local/etc/ssh_host_key is an RSA key, but it's not the correct format for SSH2. So do this: ssh-keygen -t rsa -N "" -f /usr/local/etc/ssh_host_rsa_key Or comment out the ssh_host_rsa_key entry. -- TTFN, FNORD Peter McGarvey System Administrator Network Operations, VIA Networks UK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:14:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from amsfep12-int.chello.nl (amsfep12-int.chello.nl [213.46.243.17]) by hub.freebsd.org (Postfix) with ESMTP id A76E437B421 for ; Fri, 28 Dec 2001 08:14:12 -0800 (PST) Received: from boss ([213.93.134.174]) by amsfep12-int.chello.nl (InterMail vM.5.01.03.06 201-253-122-118-106-20010523) with SMTP id <20011228161411.NPYY18578.amsfep12-int.chello.nl@boss>; Fri, 28 Dec 2001 17:14:11 +0100 From: "Rick Hoppe" To: Cc: "Johann Sharizan" Subject: RE: OpenSSH -- Make up your mind! Date: Fri, 28 Dec 2001 17:14:04 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <20011228163121.4df70a62.johann@broadpark.no> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Hi. > > I recently installed the newest port of OpenSSH for security reasons, > after having manually deleted all traces of the old one. > > After the installation the new config files could be found in > /usr/local/etc. SSHD, however, complained it couldn't find sshd_config in > /etc/ssh. So I went ahead and moved them all from /usr/local/etc to > /etc/ssh. But now, SSHD brings me this output, requiring a non-existent > file: > > Could not load host key: /etc/ssh/ssh_host_rsa_key > > OpenSSH did generate all the nessecary keys and config files upon > installation; > > (16:30) [johann@ninja] [/etc/ssh] > ls > ssh_config ssh_host_dsa_key.pub ssh_host_key.pub > ssh_host_dsa_key ssh_host_key sshd_config > > So what does SSHD need an RSA key when it already has a DSA one? > > Again, I'm utterly confused. > > Regards, > Johann A repost of your question from yesterday?? Again: did you check which sshd version is running by opening a telnet connection to port 22 ? telnet 127.0.0.1 22 should do the trick If no sshd is running, try "which sshd" so you'll see which sshd daemon you're trying to start. Probably you're still trying to start /usr/sbin/sshd instead of the new one at /usr/local/sbin/sshd Also make sure that the following line is in /etc/rc.conf and reboot after you modified it: sshd_program="/usr/local/sbin/sshd" Please do not repost your question each day. Try the tips you may receive, and give us some new feedback if it still does'nt work. Regards, Rick Hoppe Network- and System Specialist (Jr.) Xtraxion Internet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:16: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp004pub.verizon.net (smtp004pub.verizon.net [206.46.170.183]) by hub.freebsd.org (Postfix) with ESMTP id B2BAA37B425 for ; Fri, 28 Dec 2001 08:16:01 -0800 (PST) Received: from verizon.net (pool-141-154-55-106.bos.east.verizon.net [141.154.55.106]) by smtp004pub.verizon.net with ESMTP ; id fBSGG0J02825 Fri, 28 Dec 2001 10:16:00 -0600 (CST) Message-ID: <3C2C98D6.2080103@verizon.net> Date: Fri, 28 Dec 2001 11:07:50 -0500 From: Simon Morton Reply-To: smorton@acm.org User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.7) Gecko/20011221 X-Accept-Language: en,pdf,zh-CN,de-DE,zh-TW,zh, zh- MIME-Version: 1.0 To: FreeBSD Questions Subject: [Fwd: Re: How To Recursively Search Directory For Text String In Files?] Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Roman Neuhauser wrote:>>From: "Drew Tomlinson" >>To: >>Subject: How To Recursively Search Directory For Text String In Files? >>Date: Thu, 27 Dec 2001 14:19:42 -0800 >> >>OK, I am beginning to understand the power of FBSD and am sure this is >>possible. I just don't know how to do it. What I want to do is search >>all files in my current directory and all the directories below it for a >>text string and then know what file(s) contains the string. I >>understand that grep will do the search but my knowledge is limited to >>"cat file.txt | grep string". How can I construct a command in tcsh to >>feed each file to cat and then feed it to grep *AND* know the name of >>the file grep found the match? Do I have the right concept? Is there a >>better way to accomplish my goal? >> > > Hi there, > > the other suggestions are insanely complicated IMO. All you need is > > grep -FIHnir pattern path > ^^^^^^- recursive search > ||||'-- case insensitive search > |||'--- report the line number > ||'---- report the file name > |'----- ignore binary files > '------ the pattern is a fixed string > > grep -FIHnir freebsd ~/Mail > > That's the first time I have heard the Unix philosophy described as "insanely complicated". The whole beauty of the Unix approach is that you combine simple, specialized, commands together using pipes in order to perform complex tasks right on the command line. Your solution is a dead end. What if you wanted to refine your search to match only files with a certain extension or pattern in the name? What if you wanted to match only files which had been modified within a certain period of time? What if you wanted to delete or perform some other action on matching files? Are you going to add keep adding more options to grep? That way lies the insane complexity, my friend. Simon -- http://www.SimonMorton.com smorton at acm dot org \rm -rf /bin/laden -- http://www.SimonMorton.com smorton at acm dot org \rm -rf /bin/laden To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:18:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id EF55C37B428 for ; Fri, 28 Dec 2001 08:18:21 -0800 (PST) Received: from fac13.ds.psu.edu (localhost.ds.psu.edu [127.0.0.1]) by fac13.ds.psu.edu (8.11.6/8.11.3) with ESMTP id fBSGHbx33865; Fri, 28 Dec 2001 11:17:37 -0500 (EST) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200112281617.fBSGHbx33865@fac13.ds.psu.edu> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: "Anthony Atkielski" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Teaching parents UNIX In-Reply-To: Your message of "Fri, 28 Dec 2001 05:18:53 +0100." <014001c18f56$c447be00$0a00000a@atkielski.com> From: dochawk@psu.edu Date: Fri, 28 Dec 2001 11:17:37 -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG antony added. > No need. Just give her Windows and she'll forget FreeBSD. from personal experience, I doubt it. From the ages of 6-10, exposed to all three, mine continues to prefer unix, though she uses others for particular games. hawk -- What part of "non-negotiable" didn't you understand? /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings. Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:19:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 283EB37B425 for ; Fri, 28 Dec 2001 08:19:42 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Fri, 28 Dec 2001 11:21:56 -0500 From: "Joe & Fhe Barbish" To: "Simon 'corecode' Schubert" Cc: "FBSD Questions" Subject: RE: IPFW rc.firewall Date: Fri, 28 Dec 2001 11:19:38 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011228120842.0f3205df.corecode@corecode.ath.cx> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I reviewed your tutorial. I see that it's a copy of the rc.firewall file with the symbolic variables for the "simple" network filled in for your environment. You have the second statement under the comments #stop spoofing commented out because in a user ppp dialout to the ISP you are getting dynamic IP's and this rule needs {onet) & {omask) a static IP value, which you don't have because it always changes each time you dial your ISP. # Stop spoofing ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif} # ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif} I am in this same situation. I think there is a way to get the info needed for {onet} & {omask}. The rc.conf file controls the startup sequence of FBSD functions. If user ppp statements come before the IPFW statements in rc.conf then FBSD will know the dynamic IP address before IPFW starts. As you can see the rc.firewall script can access system symbolic variables as shown by case ${natd_enable} in [Yy][Ee][Ss]) if [ -n "${natd_interface}" ]; then Here natd_enable and natd_interface are system symbolic variables. There are also system symbolic variables for the {onet} & {omask} values resulting from user ppp dialin to the ISP. I need help determining what these system symbolic variables names are. Once we know there names, all we have to do is substitute there names for {onet} & {omask} and we have complete spoofing protection that correctly changes every time we dialout to the ISP. Can you help me in this? Thanks Joe -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Simon 'corecode' Schubert Sent: Friday, December 28, 2001 6:09 AM To: Joe & Fhe Barbish Cc: questions@FreeBSD.ORG Subject: Re: IPFW rc.firewall On Thu, 27 Dec 2001 19:50:46 -0500 "Joe & Fhe Barbish" wrote: > In rc.firewall one can configure the simple type of firewall rule set. > It requests you to enter your settings for > "your outside network, mask, ip". This looks like it wants a public > static ip address from ISP. I logon to my ISP using user ppp and get > a dynamic IP address that is different every time. > > What value am I to enter in these fields so it knows it's dynamic ip > address? > you can look at my custom firewall set at http://corecode.ath.cx/tutorials/ cheerz corecode -- /"\ http://corecode.ath.cx/ \ / \ ASCII Ribbon Campaign / \ Against HTML Mail and News To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:29:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fac13.ds.psu.edu (fac13.ds.psu.edu [146.186.61.98]) by hub.freebsd.org (Postfix) with ESMTP id 2536837B41C for ; Fri, 28 Dec 2001 08:29:55 -0800 (PST) Received: from fac13.ds.psu.edu (localhost.ds.psu.edu [127.0.0.1]) by fac13.ds.psu.edu (8.11.6/8.11.3) with ESMTP id fBSGTDx34806; Fri, 28 Dec 2001 11:29:13 -0500 (EST) (envelope-from hawk@fac13.ds.psu.edu) Message-Id: <200112281629.fBSGTDx34806@fac13.ds.psu.edu> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: parv Cc: Joe & Fhe Barbish , FBSD Questions Subject: Re: command line web browsers In-Reply-To: Your message of "Fri, 28 Dec 2001 00:23:58 EST." <20011228002358.A69807@moo.holy.cow> From: dochawk@psu.edu Date: Fri, 28 Dec 2001 11:29:13 -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG parv provided, > w3m. it handles frames, tables, images (yes images) etc. just fine. I tried w3m for a few days, and it drove me nuts, leading me back to lynx. Too many crashes (I've managed to crash lynx twice in seven years), the use of frames left too little of the window to read the important parts, and I couldn't launch external copies to follow links like I do with lynx. However, at the moment, I *am* having trouble getting lynx to recognize the cookies in its cookiefile . . . hawk -- What part of "non-negotiable" didn't you understand? /"\ ASCII ribbon campaign dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail These opinions will not be those of X and postings. Penn State until it pays my retainer. / \ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:36:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 9052437B405 for ; Fri, 28 Dec 2001 08:36:36 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16Jzzn-0000vu-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 16:36:35 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 4C20F116E; Fri, 28 Dec 2001 17:36:33 +0100 (CET) Date: Fri, 28 Dec 2001 17:36:33 +0100 From: Cliff Sarginson To: FreeBSD List Subject: No No No ! The troll will come out of it's cave again Message-ID: <20011228163633.GA9943@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG New Year's resolution for this list. No more f*cking comparisons of FBSD with Windows threads. Does FreeBSD support desktop applications ? That is a valid question for this list. The endless discussions, a better word would be pontifications, on the virtues of this over that is on a level of two boys in a schoolyard arguing about who has the biggest dick. There are other lists for such things Comparisons draw the trolls, or should I say troll in the singular of their (his) cave like wasps to a picnic. Happy New Year :) -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:45:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from xfw.transarc.ibm.com (xfw.transarc.ibm.com [192.54.226.51]) by hub.freebsd.org (Postfix) with ESMTP id 5614F37B419 for ; Fri, 28 Dec 2001 08:45:51 -0800 (PST) Received: from mailhost2.transarc.ibm.com (mailhost2.transarc.ibm.com [9.38.192.125]) by xfw.transarc.ibm.com (AIX4.3/UCB 8.7/8.7) with ESMTP id LAA05720 for ; Fri, 28 Dec 2001 11:36:14 -0500 (EST) Received: from smithfield.transarc.ibm.com (smithfield.transarc.ibm.com [9.38.192.92]) by mailhost2.transarc.ibm.com (8.8.0/8.8.0) with SMTP id LAA27941 for ; Fri, 28 Dec 2001 11:45:43 -0500 (EST) Date: Fri, 28 Dec 2001 11:45:42 -0500 (EST) From: Pat Barron To: freebsd-questions@freebsd.org Subject: Why can't I get 800x600 resolution on my laptop display on 4.4-R? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, I'm finally getting my systems upgraded to 4.4, and one of the machines I'm working with is an IBM ThinkPad 380XD. First, I'd like to say that I'm thankful that the boot loader in 4.4 includes a workaround for an oddity in the ThinkPad BIOS that prevented me from installing 4.3 from CD-ROM - that works fine now. But, I noticed another problem right away. I can't get X to use the entire 800x600 resolution that my display is capable of. Whenever I choose 800x600 resolution in XF86Setup, the server won't start. If I choose 640x480, it does start, but that doesn't give me enough screen real estate to be that useful. The 380XD uses the NeoMagic 128XD chipset. I picked "NeoMagic" as my display adapter in XF86Setup. However, when I start the X server, it reports "Chipset: generic". I could swear that, in FreeBSD 4.3, there was specific chipset support for the NeoMagic 128XD in the server. Am I mistaken about that? Could that be what's causing my problem? Any advice would be welcome. Thanks, --Pat. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 8:52:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (Postfix) with ESMTP id 97ACD37B41C for ; Fri, 28 Dec 2001 08:52:38 -0800 (PST) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id MAA95746; Fri, 28 Dec 2001 12:10:05 -0500 (EST) (envelope-from shovey@buffnet.net) Date: Fri, 28 Dec 2001 11:52:20 -0500 (EST) From: Stephen Hovey To: Cliff Sarginson Cc: FreeBSD List Subject: Re: No No No ! The troll will come out of it's cave again In-Reply-To: <20011228163633.GA9943@raggedclown.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hmm.. how bout developing a video game box based on freebsd tech?!?! We could call it the YBox! :) On Fri, 28 Dec 2001, Cliff Sarginson wrote: > New Year's resolution for this list. > No more f*cking comparisons of FBSD with Windows > threads. > > Does FreeBSD support desktop applications ? > That is a valid question for this list. > > The endless discussions, a better word would be > pontifications, on the virtues of this over that > is on a level of two boys in a schoolyard arguing > about who has the biggest dick. There are other lists > for such things > > Comparisons draw the trolls, or should I say troll in > the singular of their (his) cave like wasps to a picnic. > > Happy New Year :) > > -- > Regards > Cliff > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9: 1:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from xfw.transarc.ibm.com (xfw.transarc.ibm.com [192.54.226.51]) by hub.freebsd.org (Postfix) with ESMTP id 4AC8537B422 for ; Fri, 28 Dec 2001 09:01:41 -0800 (PST) Received: from mailhost2.transarc.ibm.com (mailhost2.transarc.ibm.com [9.38.192.125]) by xfw.transarc.ibm.com (AIX4.3/UCB 8.7/8.7) with ESMTP id LAA08396 for ; Fri, 28 Dec 2001 11:52:09 -0500 (EST) Received: from smithfield.transarc.ibm.com (smithfield.transarc.ibm.com [9.38.192.92]) by mailhost2.transarc.ibm.com (8.8.0/8.8.0) with SMTP id MAA28005 for ; Fri, 28 Dec 2001 12:01:37 -0500 (EST) Date: Fri, 28 Dec 2001 12:01:35 -0500 (EST) From: Pat Barron To: freebsd-questions@freebsd.org Subject: "ray" driver no longer works in 4.4-R ? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Another problem I'm having with 4.4 involves the wireless LAN card I use with my laptop. I have a Webgear Aviator card (not Aviator Pro), which works off the "ray" driver. I'm used to configuring the card using a sequence like: # kldload /modules/if_ray.ko # pccardc pccardmem 0xd4000 # pccardc enabler 0 0 ray0 -m 0 d4000 -i 3 # ifconfig ray0 192.168.247.5 (I do all this manually, rather than using pccardd, due to bad interactions between the ray driver and pccardd in earlier versions of FreeBSD - I'm not sure the problem is still relevant, though.) This works fine in FreeBSD 4.3. In FreeBSD 4.4, everything is fine until I hit the "ifconfig" command, which hangs - but it's not the whole machine that hangs, just the "ifconfig" command, I can switch to another virtual console, log in, run commands, whatever. "ps" shows that ifconfig is sleeping on "rayinit". If I go back to the ifconfig window and control-C the ifconfig command, the system panics with a "ccs not allocated" panic, called from the ray driver. (I wish I had the exact text of the panic message with me right now, but I don't, unfortunately....) Does anyone know if the ray driver is truly broken in 4.4, or am I just doing something stupid? --Pat. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9: 9:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [195.39.16.12]) by hub.freebsd.org (Postfix) with ESMTP id 262E637B417 for ; Fri, 28 Dec 2001 09:09:30 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id fBSH9Sf26429; Fri, 28 Dec 2001 18:09:28 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.7) with ESMTP id 2001122818075355:3998 ; Fri, 28 Dec 2001 18:07:53 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id fBSHIGR07588; Fri, 28 Dec 2001 18:18:16 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Fri, 28 Dec 2001 18:18:15 +0100 From: Roman Neuhauser To: smorton@acm.org Cc: FreeBSD Questions Subject: Re: [Fwd: Re: How To Recursively Search Directory For Text String In Files?] Message-ID: <20011228181815.S476@roman.mobil.cz> Mail-Followup-To: smorton@acm.org, FreeBSD Questions References: <3C2C98D6.2080103@verizon.net> Mime-Version: 1.0 In-Reply-To: <3C2C98D6.2080103@verizon.net> User-Agent: Mutt/1.3.23i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/28/2001 06:07:53 PM, Serialize by Router on ester/Mobil(Release 5.0.7 |March 21, 2001) at 12/28/2001 06:08:00 PM, Serialize complete at 12/28/2001 06:08:00 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Fri, 28 Dec 2001 11:07:50 -0500 > From: Simon Morton > To: FreeBSD Questions > Subject: [Fwd: Re: How To Recursively Search Directory For Text String In Files?] > > Roman Neuhauser wrote:>>From: "Drew Tomlinson" > >>To: > >>Subject: How To Recursively Search Directory For Text String In Files? > >>Date: Thu, 27 Dec 2001 14:19:42 -0800 > >> > >>OK, I am beginning to understand the power of FBSD and am sure this is > >>possible. I just don't know how to do it. What I want to do is search > >>all files in my current directory and all the directories below it for a > >>text string and then know what file(s) contains the string. I > >>understand that grep will do the search but my knowledge is limited to > >>"cat file.txt | grep string". How can I construct a command in tcsh to > >>feed each file to cat and then feed it to grep *AND* know the name of > >>the file grep found the match? Do I have the right concept? Is there a > >>better way to accomplish my goal? > >> > > > > Hi there, > > > > the other suggestions are insanely complicated IMO. All you need is > > > grep -FIHnir pattern path > > ^^^^^^- recursive search > > ||||'-- case insensitive search > > |||'--- report the line number > > ||'---- report the file name > > |'----- ignore binary files > > '------ the pattern is a fixed string > > > grep -FIHnir freebsd ~/Mail > > > > > > That's the first time I have heard the Unix philosophy described > as "insanely complicated". The whole beauty of the Unix approach > is that you combine simple, specialized, commands together using > pipes in order to perform complex tasks right on the command line. > > Your solution is a dead end. What if you wanted to refine your > search to match only files with a certain extension or pattern in > the name? What if you wanted to match only files which had been > modified within a certain period of time? What if you wanted to > delete or perform some other action on matching files? Are you > going to add keep adding more options to grep? > > That way lies the insane complexity, my friend. I think you should pay a wee bit more attention to what you read: "What I want to do is search all files in my current directory and all the directories below it for a text string and then know what file(s) contains the string." Simple task, simple solution. I don't know what good would the original poster achieve by using find, xargs and grep where simple grep does the work. Of course, it's easy to get carried away, but one should discriminate between use and abuse. -- FreeBSD 4.4-STABLE 6:12PM up 2 days, 4:50, 11 users, load averages: 0.02, 0.05, 0.01 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9:23:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gamma.root-servers.ch (gamma.root-servers.ch [195.49.62.126]) by hub.freebsd.org (Postfix) with SMTP id E84B737B41E for ; Fri, 28 Dec 2001 09:23:15 -0800 (PST) Received: (qmail 90625 invoked from network); 28 Dec 2001 17:23:10 -0000 Received: from dclient217-162-128-224.hispeed.ch (HELO athlon550) (217.162.128.224) by 0 with SMTP; 28 Dec 2001 17:23:10 -0000 Date: Fri, 28 Dec 2001 18:24:21 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.54 Beta/19) Educational Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <17615497133.20011228182421@buz.ch> To: questions@freebsd.org Cc: sos@FreeBSD.org Subject: Highpoint IDE RAID.. MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hello, I'm running into problems with Highpoint 370 based IDE RAID under 4.4 RELEASE (will test 4.5 PRE as soon as it has finished building on the machine in question). I simulated a broken HD by cutting power to it and basically, I expected FreeBSD to either not care or maybe log some error message but surely not to complain about not being able to write to ar0, then resetting the remaining drive several times just to hang then (well, I could type what I want on the console, but as soon as I hit enter, it was frozen, only hard reset helped). I understand that IDE RAID isn't completely supported (i.e. stuff like hot spare or on the fly rebuild currently aren't implemented) but I really do think that FreeBSD shouldn't crash if one of the disks of the array goes down. Comments? Time to file a PR? Best regards, Gabriel -----BEGIN PGP SIGNATURE----- Version: PGP 6.5i iQEVAwUBPCycuMZa2WpymlDxAQERiggApGZ4WsQhveZY7DFTo1RZFPFvKPcuo7Ez 7wYLFWeCf1MGwN49A8lrHgjZ389kLX/pip2dwpDHRAq6YPjzo7ZFVp/lV78n+9at 7Em7pgDcZfQxhNDkfA4zhiRQGoovnlWx9/FrnqffFRIKHSMs1Nion4FEtGCbbM1/ /0iu9+9Q04jxEwtDXxl5/71slcNSCCaKQCDLTXIjzpTacU+BD4wHr0WGknjcLQWz v5eSdA0yjcbQDsZwW7/EkESMOxfdZt2mON913AVb1t5qjcxQPnjneOurV8A2BpSY AthDvambrs9whyBKL9mi0fRtWlHQ8AKKU6a+FFKWjvQmSPBM61dxtg== =ebIt -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9:25: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.robhughes.com (12-237-138-77.client.attbi.com [12.237.138.77]) by hub.freebsd.org (Postfix) with SMTP id CA09437B41F for ; Fri, 28 Dec 2001 09:24:56 -0800 (PST) Received: (qmail 3806 invoked from network); 28 Dec 2001 17:24:56 -0000 Received: from hexch01.robhughes.com (192.168.1.3) by ns2.robhughes.com with SMTP; 28 Dec 2001 17:24:56 -0000 Content-Class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Subject: RE: Bridging with freebsd/ipfilter X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Date: Fri, 28 Dec 2001 11:24:55 -0600 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Bridging with freebsd/ipfilter Thread-Index: AcGPrvSYH4VsD70aS5iGJy4kFcOOEgAE6bLQ From: "Robert D. Hughes" To: "FreeBSD-questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ahh... because it works on OBSD, I assumed it also worked on FBSD. I'll flail myself appropriately later. However, the IPF FAQ at http://coombs.anu.edu.au/ipfilter/faq/IPFtoc.html does state its to be added. -----Original Message----- From: Jerry Murdock [mailto:jerry_murdock@yahoo.com] Sent: Friday, December 28, 2001 8:48 AM To: Robert D. Hughes; FreeBSD-questions Subject: Re: Bridging with freebsd/ipfilter --- Robert D. Hughes wrote: > A Google search on +freebsd +ipfw +bridge should get you a ton of pages > on how to do exactly that. But the short answer is yes, you can have an > addressless firewall using bridging and filter in both directions.=20 > Unless something has changed recently, "Out" rules do not work with an IPFW bridge. I beleive this is what he meant. > You could also do that using IPF if you don't want to learn ipfw. >=20 Again, unless something has changed recently, IPF does not work with FBSD bridges, only IPFW. =20 I would be happy on both counts if I'm wrong. Jerry __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9:28:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 756E537B41A for ; Fri, 28 Dec 2001 09:28:39 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Fri, 28 Dec 2001 12:30:55 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: mouse support for Xterm Date: Fri, 28 Dec 2001 12:28:37 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How do I activate mouse support on the system console and telenet sessions? Or said another way What do I have to do to make the master root console to act like a xterm terminal which is compatible with the Xterm mouse sequences?. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9:56: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from TheWorld.com (pcls2.std.com [199.172.62.104]) by hub.freebsd.org (Postfix) with ESMTP id 4F2FB37B41E for ; Fri, 28 Dec 2001 09:56:01 -0800 (PST) Received: from shell.TheWorld.com (root@shell01.TheWorld.com [199.172.62.241]) by TheWorld.com (8.9.3/8.9.3) with ESMTP id MAA26937; Fri, 28 Dec 2001 12:55:59 -0500 Received: (from kwc@localhost) by shell.TheWorld.com (8.9.3/8.9.3) id MAA6061942; Fri, 28 Dec 2001 12:55:58 -0500 (EST) Date: Fri, 28 Dec 2001 12:55:58 -0500 (EST) From: Kenneth W Cochran Message-Id: <200112281755.MAA6061942@shell.TheWorld.com> To: freebsd-questions@freebsd.org Subject: Howto - dhclient not generate/update resolv.conf Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello... What is a/the correct way to get DHCP (dhclient) to *not* generate/update /etc/resolv.conf when it starts/renews? OS is FreeBSD RELENG_4 as of 2001/12/27 (4.5-PRERELEASE). What I want to do: Get my ip-address, etc, via DHCP/dhclient, but still be able to run my own (caching-only, for example) nameserver. Based on manpage(s) (e.g. resolv.conf(5)) it seems quite appropriate to *not* have resolv.conf in this scenario. (?) Citable source (aka, FM to RT :) much appreciated. So far, I haven't found quite what I'm looking for in the manpages, Handbook, books, etc. Thanks, -kc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 9:59:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu57-28-046.nc.rr.com [66.57.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 653B737B422 for ; Fri, 28 Dec 2001 09:59:24 -0800 (PST) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.11.6/8.11.6) with ESMTP id fBSHxeE28380; Fri, 28 Dec 2001 12:59:40 -0500 (EST) (envelope-from marcus@marcuscom.com) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Fri, 28 Dec 2001 12:59:40 -0500 (EST) From: Joe Clarke To: Kenneth W Cochran Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Howto - dhclient not generate/update resolv.conf In-Reply-To: <200112281755.MAA6061942@shell.TheWorld.com> Message-ID: <20011228125815.B27720-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001, Kenneth W Cochran wrote: > Hello... > > What is a/the correct way to get DHCP (dhclient) to *not* > generate/update /etc/resolv.conf when it starts/renews? > > OS is FreeBSD RELENG_4 as of 2001/12/27 (4.5-PRERELEASE). > > What I want to do: Get my ip-address, etc, via DHCP/dhclient, > but still be able to run my own (caching-only, for example) > nameserver. Based on manpage(s) (e.g. resolv.conf(5)) it seems > quite appropriate to *not* have resolv.conf in this scenario. (?) I let dhclient play with resolv.conf, but I tell it to prepend my caching server address. From /etc/dhclient.conf: interface "ed0" { supersede domain-name "marcuscom.com"; prepend domain-name-servers 127.0.0.1; } man dhclient.conf(5) gives a good example of a "complex" dhclient.conf. Joe > > Citable source (aka, FM to RT :) much appreciated. So far, I > haven't found quite what I'm looking for in the manpages, > Handbook, books, etc. > > Thanks, > > -kc > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10: 2:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sdsl-216-36-101-146.dsl.chi.megapath.net (sdsl-216-36-101-146.dsl.chi.megapath.net [216.36.101.146]) by hub.freebsd.org (Postfix) with SMTP id 3518437B416 for ; Fri, 28 Dec 2001 10:01:41 -0800 (PST) Received: (qmail 18208 invoked from network); 28 Dec 2001 18:02:01 -0000 Received: from apu.five.sight (HELO apu.five.sight.fivesight.com) (lucas@192.168.0.102) by wiggum.five.sight with SMTP; 28 Dec 2001 18:02:00 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15404.45974.412120.691151@apu.five.sight> Date: Fri, 28 Dec 2001 12:01:58 -0600 To: ScaryG From: Lucas Bergman Cc: FreeBSD Questions Subject: Re: adduser in a perl script question In-Reply-To: <20011228101438.187f0eb0.freymann@scaryg.shacknet.nu> References: <20011228101438.187f0eb0.freymann@scaryg.shacknet.nu> X-Mailer: VM 6.96 under 21.4 (patch 5) "Civil Service" XEmacs Lucid Reply-To: lucas@slb.to Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I'm trying to automate the creation of a new user in a perl5 > script... I need to set the password which is why I'm not using > pw. The man pages for pw talk about a pipe for the password but > there are no examples. I think you want this: $ echo mypassword | pw useradd myname -h 0 Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10: 2:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from localhost.nosnibod.sytes.net (pc-62-30-231-87-sc.blueyonder.co.uk [62.30.231.87]) by hub.freebsd.org (Postfix) with ESMTP id D703D37B416 for ; Fri, 28 Dec 2001 10:02:42 -0800 (PST) Received: from localhost.nosnibod.sytes.net (localhost.nosnibod.sytes.net [127.0.0.1]) by localhost.nosnibod.sytes.net (8.11.6/8.11.6) with ESMTP id fBSI2Pg03301 for ; Fri, 28 Dec 2001 18:02:27 GMT (envelope-from dave.ross@uk.com) Subject: Re: Howto - dhclient not generate/update resolv.conf From: Dave Ross To: freebsd-questions@freebsd.org In-Reply-To: <200112281755.MAA6061942@shell.TheWorld.com> References: <200112281755.MAA6061942@shell.TheWorld.com> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-ksByRrbN4zqLMq0ao35U" X-Mailer: Evolution/1.0 (Preview Release) Date: 28 Dec 2001 18:02:24 +0000 Message-Id: <1009562547.330.19.camel@speedy.nosnibod.sytes.net> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=-ksByRrbN4zqLMq0ao35U Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Fri, 2001-12-28 at 17:55, Kenneth W Cochran wrote: > Hello... >=20 > What is a/the correct way to get DHCP (dhclient) to *not* > generate/update /etc/resolv.conf when it starts/renews? >=20 > OS is FreeBSD RELENG_4 as of 2001/12/27 (4.5-PRERELEASE). >=20 > What I want to do: Get my ip-address, etc, via DHCP/dhclient, > but still be able to run my own (caching-only, for example) > nameserver. Based on manpage(s) (e.g. resolv.conf(5)) it seems > quite appropriate to *not* have resolv.conf in this scenario. (?) >=20 > Citable source (aka, FM to RT :) much appreciated. So far, I > haven't found quite what I'm looking for in the manpages, > Handbook, books, etc. man dhlclient.conf What you want is something like:- -- BEGIN /etc/dhclient.conf -- interface "wi0" { prepend domain-name-servers 127.0.0.1; } -- END -- --=20 Dave Ross --=-ksByRrbN4zqLMq0ao35U Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQA8LLOwStlPKyGucJMRAqjlAJ9jbGPQPzcGtEqw2hP+YY8IZPvmBACffqvh yV8sddpN3fwTAz5JXYZ6Vug= =QkMX -----END PGP SIGNATURE----- --=-ksByRrbN4zqLMq0ao35U-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10: 7:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sdsl-216-36-101-146.dsl.chi.megapath.net (sdsl-216-36-101-146.dsl.chi.megapath.net [216.36.101.146]) by hub.freebsd.org (Postfix) with SMTP id 8ABC237B426 for ; Fri, 28 Dec 2001 10:07:25 -0800 (PST) Received: (qmail 18221 invoked from network); 28 Dec 2001 18:07:47 -0000 Received: from apu.five.sight (HELO apu.five.sight.fivesight.com) (lucas@192.168.0.102) by wiggum.five.sight with SMTP; 28 Dec 2001 18:07:47 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15404.46322.533938.96640@apu.five.sight> Date: Fri, 28 Dec 2001 12:07:46 -0600 To: "Andre` Niel Cameron" From: Lucas Bergman Cc: Subject: Re: Help with Compiler path please! In-Reply-To: <026301c18f4a$7bed84c0$a50410ac@olmct.net> References: <026301c18f4a$7bed84c0$a50410ac@olmct.net> X-Mailer: VM 6.96 under 21.4 (patch 5) "Civil Service" XEmacs Lucid Reply-To: lucas@slb.to Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andre` Niel Cameron writes: > I develop in C/C++ on windows... I'm sorry to hear that... :) > ...in bsd WHY is iostream.h not in the compiler path? This usually happens because you're using `gcc' instead of `g++' as a frontend to the C++ compiler. Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10: 9:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chmls06.mediaone.net (chmls06.mediaone.net [24.147.1.144]) by hub.freebsd.org (Postfix) with ESMTP id 158FF37B422 for ; Fri, 28 Dec 2001 10:09:34 -0800 (PST) Received: from be-well.ilk.org (lowellg.ne.mediaone.net [24.147.188.158]) by chmls06.mediaone.net (8.11.1/8.11.1) with ESMTP id fBSIAQQ25882; Fri, 28 Dec 2001 13:10:26 -0500 (EST) Received: (from lowell@localhost) by be-well.ilk.org (8.11.6/8.11.4) id fBSI9WL03686; Fri, 28 Dec 2001 13:09:32 -0500 (EST) (envelope-from lowell) To: freebsd-questions@freebsd.org, kwc@TheWorld.com Subject: Re: Howto - dhclient not generate/update resolv.conf References: From: Lowell Gilbert Date: 28 Dec 2001 13:09:32 -0500 In-Reply-To: kwc@TheWorld.com's message of "29 Dec 2001 01:56:21 +0800" Message-ID: <447kr7nrmr.fsf@lowellg.ne.mediaone.net> Lines: 12 X-Mailer: Gnus v5.7/Emacs 20.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG kwc@TheWorld.com (Kenneth W Cochran) writes: > What is a/the correct way to get DHCP (dhclient) to *not* > generate/update /etc/resolv.conf when it starts/renews? > Citable source (aka, FM to RT :) much appreciated. So far, I > haven't found quite what I'm looking for in the manpages, > Handbook, books, etc. dhclient(8) and dhclient-script(8). They even mention resolv.conf auto-creation in particular as one of the things you might want to customize. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:10:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 68E4137B42A for ; Fri, 28 Dec 2001 10:10:26 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Fri, 28 Dec 2001 13:12:40 -0500 From: "Joe & Fhe Barbish" To: "Ryan Thompson" Cc: "FBSD Questions" , , Subject: RE: avoid ping Date: Fri, 28 Dec 2001 13:10:21 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011221010222.R374-100000@catalyst.sasknow.net> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You responded ipfw add 400 deny icmp from any to ${you} icmptype 8 Where ${you} is the public IP address of your machine, or network address of your subnet. I respond. ${you} is the static IP address issued by your ISP. How do I get this value if my ISP does dynamic IP assignments? Thanks Joe -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ryan Thompson Sent: Friday, December 21, 2001 2:09 AM To: Philip Hallstrom Cc: Lee Mark Mercado; freebsd-questions@FreeBSD.ORG Subject: Re: avoid ping Philip Hallstrom wrote to Lee Mark Mercado: > You could configure your firewall to deny those icmp packets... Yes, but it should be pointed out that you almost certainly don't want to deny ALL ICMP traffic, as some of it is actually useful :-) Basically, man 8 ipfw, /icmptypes .. You will want to deny one or both of echo reply (ICMP type 0), and echo request (type 8). You might try something like the following. The command below will allow you to ping other hosts (and will allow the replies to come back), but will NOT allow echo requests to come IN to your machine/network: ipfw add 400 deny icmp from any to ${you} icmptype 8 Where ${you} is the public IP address of your machine, or network address of your subnet. Hope this helps! - Ryan > -philip > > On Thu, 20 Dec 2001, Lee Mark Mercado wrote: > > > > > > > how could i avoid being pinged ? i know theres no port for ping and it uses > > icmp - how could i avoid it then ? > > > > need help. thx > > > > _________________________________________________________________ > > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:11:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gaia.host4u.net (gaia.host4u.net [209.150.128.48]) by hub.freebsd.org (Postfix) with ESMTP id EFB1537B446 for ; Fri, 28 Dec 2001 10:11:13 -0800 (PST) Received: from andre (bricks.fastdns.net [216.71.43.117]) by gaia.host4u.net (8.8.5/8.8.5) with SMTP id LAA19965; Fri, 28 Dec 2001 11:46:33 -0600 Message-ID: <011301c18fca$bb3c46e0$a50410ac@olmct.net> Reply-To: "Andre` Niel Cameron" From: "Andre` Niel Cameron" To: Cc: References: <026301c18f4a$7bed84c0$a50410ac@olmct.net> <15404.46322.533938.96640@apu.five.sight> Subject: Re: Help with Compiler path please! Date: Fri, 28 Dec 2001 13:09:02 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2462.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Your so smart:) Thanks that was it swtiched to g++ and no more problems! Appreciate it thanks! Regards, Andre` C. Technical Support Ô¿Ô¬ ---------------------------------------------------------------------------- - Visit our support manual at http://supportmanual.com/ ----- Original Message ----- From: "Lucas Bergman" To: "Andre` Niel Cameron" Cc: Sent: Friday, December 28, 2001 1:07 PM Subject: Re: Help with Compiler path please! > Andre` Niel Cameron writes: > > I develop in C/C++ on windows... > > I'm sorry to hear that... :) > > > ...in bsd WHY is iostream.h not in the compiler path? > > This usually happens because you're using `gcc' instead of `g++' as a > frontend to the C++ compiler. > > Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:11:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gamma.root-servers.ch (gamma.root-servers.ch [195.49.62.126]) by hub.freebsd.org (Postfix) with SMTP id 8A8A937B4EC for ; Fri, 28 Dec 2001 10:11:15 -0800 (PST) Received: (qmail 92728 invoked from network); 28 Dec 2001 18:11:14 -0000 Received: from dclient217-162-128-224.hispeed.ch (HELO athlon550) (217.162.128.224) by 0 with SMTP; 28 Dec 2001 18:11:14 -0000 Date: Fri, 28 Dec 2001 19:12:28 +0100 From: Gabriel Ambuehl X-Mailer: The Bat! (v1.54 Beta/19) Educational Organization: BUZ Internet Services X-Priority: 3 (Normal) Message-ID: <5218384104.20011228191228@buz.ch> To: Dave Ross Cc: questions@freebsd.org Subject: Re[2]: Howto - dhclient not generate/update resolv.conf In-Reply-To: <1009562547.330.19.camel@speedy.nosnibod.sytes.net> References: <200112281755.MAA6061942@shell.TheWorld.com> <1009562547.330.19.camel@speedy.nosnibod.sytes.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hello Dave, 28 Dec 2001, 19:02:24, you wrote: > On Fri, 2001-12-28 at 17:55, Kenneth W Cochran wrote: >> Hello... >> >> What is a/the correct way to get DHCP (dhclient) to *not* >> generate/update /etc/resolv.conf when it starts/renews? A way (mine): chflags schg /etc/resolv.conf Best regards, Gabriel -----BEGIN PGP SIGNATURE----- Version: PGP 6.5i iQEVAwUBPCyn/cZa2WpymlDxAQFMaQf/Uinq1UV3HaNhyZFyaN7IXvW6s8dbjowA VG+1yfw5ZQbfm634Z84N/zuQ9PwMvYDQH/VYC6xpNiS/j0Ze/xMrSCUvyiUo+MpQ v0sNAxIVBWQ+BsfCt52ieuFt+4eW6kzetmvBOHnyv70D7+WxRQLTN1HP+MgSyBb0 UmRLcvhL3j0lD+bt92B+reMNUnMUZNJmy24bsx4XKcbZpIbAA0NjMxmW3ab89Mvz /d9/l5s0ub+YRuEBV5UkRbMsTEcR0utpOmyOy82k7cI1E7UIVtUMA7eHBh//0IeB GiJYHTbgYX7L61em/A8eff9q9ZJjn8A8INI1DwugrJryVysVgZ7Wxw== =JnVb -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:14: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chmls18.ne.ipsvc.net (chmls18.ne.ipsvc.net [24.147.1.153]) by hub.freebsd.org (Postfix) with ESMTP id F17C237B41E for ; Fri, 28 Dec 2001 10:13:55 -0800 (PST) Received: from be-well.ilk.org (lowellg.ne.mediaone.net [24.147.188.158]) by chmls18.ne.ipsvc.net (8.11.6/8.11.6) with ESMTP id fBSIDpG19128 for ; Fri, 28 Dec 2001 13:13:54 -0500 (EST) Received: (from lowell@localhost) by be-well.ilk.org (8.11.6/8.11.4) id fBSIDpn03693; Fri, 28 Dec 2001 13:13:51 -0500 (EST) (envelope-from lowell) To: freebsd-questions@freebsd.org Subject: Re: cvsup problem References: <3C2CA990.5080700@noemail.com> From: Lowell Gilbert Date: 28 Dec 2001 13:13:51 -0500 In-Reply-To: mzmy's message of "Sat, 29 Dec 2001 01:19:12 +0800" Message-ID: <444rmbnrfk.fsf@lowellg.ne.mediaone.net> Lines: 11 X-Mailer: Gnus v5.7/Emacs 20.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG mzmy writes: > i'm using freebsd 4.4 release.when i cvsup to 4.4 stable i got 4.5 > prerelease.how to i fix this problem? > here from my cvsupfile > *default release=cvs tag=RELENG_4 > thank for helping. It's not a problem. RELENG_4 is about to go from being 4.4-STABLE to 4.5-STABLE. See the FreeBSD FAQ entry titled "I tried to update my system to the latest -STABLE, but got -RC or -BETA! What is going on?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:14:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id 735C037B416 for ; Fri, 28 Dec 2001 10:14:20 -0800 (PST) Received: (qmail 21881 invoked from network); 28 Dec 2001 18:14:13 -0000 Received: from dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.196) by smtp3.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 18:14:13 -0000 Received: (qmail 52254 invoked from network); 28 Dec 2001 18:14:12 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 18:14:12 -0000 From: "Doug Reynolds" To: "Roger 'Rocky' Vetterberg" Cc: "darryl@osborne-ind.com" , "freebsd-questions@FreeBSD.ORG" Date: Fri, 28 Dec 2001 13:15:39 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <3C2C70B9.5020602@rambo.simx.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: ftp & FreeBSD firewall Message-Id: <20011228181420.735C037B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 14:16:41 +0100, Roger 'Rocky' Vetterberg wrote: >Doug Reynolds wrote: > >>[snip] >> >>i dont know about ws_ftp or msftp, but leapftp you just click pasv. my >>guess is that a rule for your firewall is off.. i think ftp sends data >>back on port20 as well. that could be the problem >> >Correct me if Im wrong, it has been a while since I studied the FTP >protocoll, but if the client uses passive, no data should be sent back >at all. The server will open listening ports, and the client will >connect to the server. The server should never have to contact the client. I am not 100% sure.. thought i'd mention it since i was just browsing the services to setup my firewall :) --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:24: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 49FF537B420 for ; Fri, 28 Dec 2001 10:23:46 -0800 (PST) Received: (qmail 9215 invoked from network); 28 Dec 2001 18:23:45 -0000 Received: from dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.196) by smtp2.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 18:23:45 -0000 Received: (qmail 57751 invoked from network); 28 Dec 2001 18:23:42 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 18:23:42 -0000 From: "Doug Reynolds" To: "freebsd-questions@freebsd.org" , "Robert D. Hughes" Date: Fri, 28 Dec 2001 13:25:10 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: RE: have i make the buildworld for any changes in the kernel source files? Message-Id: <20011228182346.49FF537B420@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 08:15:16 -0600, Robert D. Hughes wrote: >hi >have i to make buildworld for every change in the >kernel source files? >thanx no. you just have to make kernel KERNCONF=YOURKERNELCONFIGFILE & reboot --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:24:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from corten2.billschoolcraft.com (adsl-63-193-247-201.dsl.snfc21.pacbell.net [63.193.247.201]) by hub.freebsd.org (Postfix) with ESMTP id 923BE37B416 for ; Fri, 28 Dec 2001 10:24:51 -0800 (PST) Received: from corten8.billschoolcraft.com ([192.168.7.8]) by corten2.billschoolcraft.com with esmtp (Exim 3.22 #1 (Debian)) id 16K1gT-00044Q-00; Fri, 28 Dec 2001 10:24:45 -0800 Date: Fri, 28 Dec 2001 15:24:43 -0800 (PST) From: Bill Schoolcraft X-Sender: bill@corten8 To: Cliff Sarginson Cc: FreeBSD List Subject: Re: No No No ! The troll will come out of it's cave again In-Reply-To: <20011228163633.GA9943@raggedclown.net> Message-ID: System-ID: [en] (I; Linux i86pc) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At Fri, 28 Dec 2001 it looks like Cliff Sarginson composed: > is on a level of two boys in a schoolyard arguing > about who has the biggest dick. [joke] It not the length, but the strength. -- Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life." _\_v http://forwardslashunix.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:30:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id DDC5837B435 for ; Fri, 28 Dec 2001 10:30:19 -0800 (PST) Received: (qmail 20023 invoked from network); 28 Dec 2001 18:30:18 -0000 Received: from dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.196) by smtp2.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 18:30:18 -0000 Received: (qmail 62486 invoked from network); 28 Dec 2001 18:30:16 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 18:30:16 -0000 From: "Doug Reynolds" To: "freebsd-questions@FreeBSD.ORG" , "Wes Baehr" Date: Fri, 28 Dec 2001 13:31:43 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: question about bsd Message-Id: <20011228183019.DDC5837B435@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 27 Dec 2001 15:13:19 -0800, Wes Baehr wrote: > > >On 12/26/01 2:00 PM, "Doug Reynolds" wrote: > >> On Wed, 26 Dec 2001 11:56:16 -0600, Murphy, Derrick wrote: >> >>> I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram and >>> a floppy drive. The hd is 200Mb What kind of unix could i install on >>> this? Im guessing it would have to be a pretty old version to work with so >>> little. If anyone knows of any free unix versions that would work with >>> this, please let me know ^_^ Thanks >> >> picobsd. >> >> you need like 12mbs of ram for freebsd > >Not true, I run freebsd 4.3-RELEASE on a 33mhz 486 with 8MB of RAM. >Although the performance is worse than a lagging 28.8 dialup user, it still >'works'. (I gave the box the name 'latency' for its slowness :P) i guess 8 would work, but i think you need 12 to install dont you? freebsd ran excellent with my amd 5x86-133 with 28megs of ram.. i used it for a DoD ppp server and dumb stuff. wouldn't try a make world on it though. :) my current amd 450 with 256megs and ATA 100 with do a build world under 2hrs :) --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:30:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from blacklamb.mykitchentable.net (ekgr-dsl2-77.citlink.net [207.173.226.77]) by hub.freebsd.org (Postfix) with ESMTP id 4F4ED37B41C for ; Fri, 28 Dec 2001 10:29:31 -0800 (PST) Received: from tagalong (unknown [165.107.42.196]) by blacklamb.mykitchentable.net (Postfix) with SMTP id 4E217EE692 for ; Fri, 28 Dec 2001 10:26:51 -0800 (PST) Message-ID: <005001c18fcd$96d25940$c42a6ba5@lc.ca.gov> From: "Drew Tomlinson" To: Subject: NTP Broadcast Client Date: Fri, 28 Dec 2001 10:29:29 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG One my home network, I have setup ntpd on one server to broadcast time to my internal subnet. It seems to be working OK as my Windows machines receive the broadcasts and the time is updated. However, I have a FSBD 4.4-RELEASE machine that I am trying to configure as a broadcast client. Initially, I only used the "-b" flag when starting the daemon and thought the server would sync. But over time I noticed it was not. Next, I re-read the man pages and came across "auth". Since I did not set up any keys (more stuff I don't understand yet), I added the "-A" flag. If I understand this correctly, that will allow ntpd to sync with any ntp broadcast it receives? For testing, I've started with the "-D 3" flag and can see that the server is receiving broadcasts. I don't understand much else and am not sure if the time is actually being updated. It's still around 2 minutes slow but I think it may take time to catch up if the time is not being stepped? Can anyone confirm my suspicions? Here is some output from ntpd: poll_update: at 1084 192.168.1.2 poll 7 burst 0 last 1084 next 1147 input_handler: fd=7 length 48 from c0a80102 192.168.1.2 receive: from 192.168.1.2 restrict 00 receive: at 1110 from 192.168.1.2 mode 5 pkt_mode 5 action 1 poll_update: at 1110 192.168.1.2 poll 6 burst 0 last 1084 next 1148 clock_filter: offset 159.069383 delay 0.002800 disp 0.001862 std 0.000140, age 0 select: endpoint -1 158.986948 select: endpoint 0 159.069383 select: endpoint 1 159.151817 select: low 158.986948 high 159.151817 select: 192.168.1.2 distance 48.082434 select: survivors 1 select 0.000000 peer 0.000140 select: 192.168.1.2 offset 159.069383, distance 48.082434 poll 1 poll_update: at 1110 192.168.1.2 poll 6 burst 0 last 1084 next 1147 select: combine offset 159.069383 clock_update: at 1110 assoc 1 local_clock: offset 159.069383 jitter 0.000140 state 4 auth_agekeys: at 1140 keys 0 expired 0 Thanks for your help! Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:32:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp004pub.verizon.net (smtp004pub.verizon.net [206.46.170.183]) by hub.freebsd.org (Postfix) with ESMTP id BAE5B37B428 for ; Fri, 28 Dec 2001 10:31:39 -0800 (PST) Received: from verizon.net (pool-141-154-55-106.bos.east.verizon.net [141.154.55.106]) by smtp004pub.verizon.net with ESMTP ; id fBSIVKJ00857 Fri, 28 Dec 2001 12:31:20 -0600 (CST) Message-ID: <3C2CB87C.90000@verizon.net> Date: Fri, 28 Dec 2001 13:22:52 -0500 From: Simon Morton Reply-To: smorton@acm.org User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.7) Gecko/20011221 X-Accept-Language: en,pdf,zh-CN,de-DE,zh-TW,zh, zh- MIME-Version: 1.0 To: FreeBSD Questions Subject: Re: [Fwd: Re: How To Recursively Search Directory For Text String In Files?] Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Roman Neuhauser wrote: > I think you should pay a wee bit more attention to what you read: > > "What I want to do is search all files in my current directory and > all the directories below it for a text string and then know what > file(s) contains the string." Well, since you mentioned it, if you had paid "a wee bit more attention" to the problem statement you would have known that only the names of matching files were required, not all matching strings plus file names and line numbers. Nor did it stipulate case-insensitive search or excluding binary files. So the correct solution would actually be "grep -Flr pattern path". So much for reading comprehension skills. > Simple task, simple solution. I don't know what good would the > original poster achieve by using find, xargs and grep where simple > grep does the work. Of course, it's easy to get carried away, but > one should discriminate between use and abuse. I agree that xargs adds no value here. My solution only used find and grep. What is to be gained by doing so? Maybe the opportunity to learn not just the solution to the immediate problem but perhaps also a tool that could be of use solving similar but more complex problems in the future. "Give a man a fish, feed him today. Teach a man to fish, feed him for life". "grep -Flr pattern path" solves the problem asked using the minimum number of characters. This also was not a requirement. "find path -exec grep -Fl pattern {} \;" uses 16 more characters to do the same job while providing a template for more complex searches as well as a much better illustration of the "Unix philosophy". If you call this insanely complicated then you don't truly appreciate the beauty and power that is Unix. Simon -- http://www.SimonMorton.com smorton at acm dot org \rm -rf /bin/laden -- http://www.SimonMorton.com smorton at acm dot org \rm -rf /bin/laden To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:36:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from brazil.webair.com (brazil.webair.com [216.130.191.2]) by hub.freebsd.org (Postfix) with ESMTP id 2B84D37B41A for ; Fri, 28 Dec 2001 10:36:19 -0800 (PST) Received: from localhost (brianh@localhost) by brazil.webair.com (8.11.6/8.9.3) with ESMTP id fBSIXt741020 for ; Fri, 28 Dec 2001 18:33:56 GMT (envelope-from brianh@webair.com) Date: Fri, 28 Dec 2001 18:33:55 +0000 (GMT) From: Brian Hourigan To: Subject: su question/concern Message-ID: <20011228182837.T34176-100000@brazil.webair.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Good afternoon, I have found some behavior of 'su' to be questionable. Since it was out of my scroll buffer, I've typed my terminal session: %/usr/bin/su Can't load /usr/lib/libutil-3.so %/usr/bin/su Can't load /usr/lib/libutil-3.so %/usr/bin/su Can't make pipe. %/usr/bin/su Can't make pipe. %/usr/bin/su You have mail. orion# pstat -T indicated I was intermittently out of files, there had been many sendmails for a cron process running, along with busy apache/ftpd. Sincerely, ---------------------------------------- Brian Hourigan Lead Technical Support Specialist/ Programming Development Team Webair Internet Development, Inc. Fax: 516.568.0867 http://www.webair.com ---------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:41: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dot.uber.com.br (ctbcnetsuper-146.xdsl-fixo.ctbcnetsuper.com.br [200.225.201.146]) by hub.freebsd.org (Postfix) with SMTP id D2C9537B507 for ; Fri, 28 Dec 2001 10:40:38 -0800 (PST) Received: (qmail 17439 invoked from network); 28 Dec 2001 16:36:12 -0000 Received: from ctbcnetsuper-078.xdsl-dinamico.ctbcnetsuper.com.br (HELO uber.com.br) (200.225.205.78) by 0 with SMTP; 28 Dec 2001 16:36:12 -0000 Message-ID: <3C2CBEB8.97CE4C59@uber.com.br> Date: Fri, 28 Dec 2001 16:49:29 -0200 From: =?iso-8859-1?Q?Jos=E9?= Romildo Malaquias Organization: UFOP X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.4.9-13 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Keymap "us international" in console Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello. In an attempt to have my US keyboard working with dead keys (the so called "US International" keymap) I have installed the attached keymap file /usr/share/syscons/keymaps/us.iso.acc.kbd which, provides support for dead keys, and added a line with keymap="us.iso.acc.kbd" in /etc/rc.conf. I have also configured the console font to be iso8859-1 (font8x8="iso-8x8", font8x14="iso-8x14", font8x16="iso-8x16"). But after rebooting my FreeBSD 4-4 system, I did not get the expected behaviour. The system accepts the dead keys, but cannot combine them with the vowels typed immediately after a dead key to build an accented character. For instance, typing 'a I get a beep and no á character, as it is expected. But if I type ' followed by an space, I get the single quote ' character. Strangely, I am getting the same behaviour in a xterm window with XFree86-4.1.0, which is setup to use the "us_intl" keyboard layout and the pc105 keyboard geometry. Any clues? Romildo -- Prof. José Romildo Malaquias Departamento de Computação http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto romildo@iceb.ufop.br Brasil romildo@uber.com.br To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:42:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id 93EC637B41C for ; Fri, 28 Dec 2001 10:42:30 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP id TAA03146 (8.8.8/1.13); Fri, 28 Dec 2001 19:42:25 +0100 (MET) Message-Id: <200112281842.TAA03146@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: "Peter Ong" Subject: Re: Package or Ports CVSup Date: Fri, 28 Dec 2001 19:47:23 +0000 X-Mailer: KMail [version 1.3.2] References: <01f801c18f5e$558baf00$0101a8c0@haloflightleader.net> In-Reply-To: <01f801c18f5e$558baf00$0101a8c0@haloflightleader.net> Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Personally I think for big programs it's easier to use the packages. It is avoiding a lot a compiling time. For small programs I prefer the ports, because it's saving time to find out where the package is. Building X or KDE from the ports is not a nice experience. CVSup actually is not that bad. Simon Siemonsma On Friday 28 December 2001 05:13, you wrote: > Question: > Do you guys usually build from the ports or install from packages the CVSup > tool? > > This is my first time installing CVSup. I went to /usr/ports/net/cvsup, > and then I hit make. It's downloading all kinds of stuff like XFree86 > parts. And it's still continuing on the compile. It's taking over an hour > now. Do you guys normally install CVSup from package or port? Just want > to find out the common practice. > > Thanks. > > Peter > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:46:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id C2ACE37B41A for ; Fri, 28 Dec 2001 10:46:06 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBSIjwR69446; Fri, 28 Dec 2001 19:45:58 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <01d701c18fcf$e3a9e8d0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Steve Tremblett" Cc: "Bob Hall" , "FreeBSD Questions" References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> <01a801c18f9c$a15050b0$0a00000a@atkielski.com> <20011228075911.A15499@sjt-u10.cisco.com> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 19:45:57 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Steve writes: > and I know lots of people who aren't patching > security holes or updating their virus scanners > or defragmenting their hard disks. I know lots of people who don't brush and floss after every meal and don't get breast and prostate exams every year, too. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:47: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id C697937B420 for ; Fri, 28 Dec 2001 10:47:03 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBSIksR69454; Fri, 28 Dec 2001 19:46:54 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <01de01c18fd0$050aadc0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Steve Tremblett" Cc: "Marco Radzinschi" , "FreeBDS-Questions" References: <20011227151032.T52973-100000@mail.radzinschi.com> <011101c18f12$f31aaec0$0a00000a@atkielski.com> <20011228080343.B15499@sjt-u10.cisco.com> Subject: Re: Teaching parents UNIX Date: Fri, 28 Dec 2001 19:46:53 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Steve writes: > It makes perfect sense if that will be the only > car in the family. It only costs you a day of > instruction and a little practice. A day of instruction for each person who has to drive it. In contrast, an automatic transmission requires no instruction for anyone. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:57: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id AC0B037B422 for ; Fri, 28 Dec 2001 10:57:00 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K2Bf-0004z6-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 18:56:59 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id F146B116E; Fri, 28 Dec 2001 19:56:57 +0100 (CET) Date: Fri, 28 Dec 2001 19:56:57 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Package or Ports CVSup Message-ID: <20011228185657.GA1122@raggedclown.net> References: <01f801c18f5e$558baf00$0101a8c0@haloflightleader.net> <200112281842.TAA03146@smtp.hccnet.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200112281842.TAA03146@smtp.hccnet.nl> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I usually use the ports, it's kind of satisfying to know it's all compiling along merrily. However X/KDE, as pointed out below takes an incredible length of time. I compiled it on a 1Ghz Pentium with 512MB memory off of a SCSI disk installation .. I also translated the whole of War and Peace into Latvian at the same time. It is *big*. -- Regards Cliff On Fri, Dec 28, 2001 at 07:47:23PM +0000, Simon Siemonsma wrote: > Personally I think for big programs it's easier to use the packages. It is > avoiding a lot a compiling time. For small programs I prefer the ports, > because it's saving time to find out where the package is. > Building X or KDE from the ports is not a nice experience. CVSup actually is > not that bad. > > Simon Siemonsma > > On Friday 28 December 2001 05:13, you wrote: > > Question: > > Do you guys usually build from the ports or install from packages the CVSup > > tool? > > > > This is my first time installing CVSup. I went to /usr/ports/net/cvsup, > > and then I hit make. It's downloading all kinds of stuff like XFree86 > > parts. And it's still continuing on the compile. It's taking over an hour > > now. Do you guys normally install CVSup from package or port? Just want > > to find out the common practice. > > > > Thanks. > > > > Peter > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 10:59:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 0B77537B405 for ; Fri, 28 Dec 2001 10:59:15 -0800 (PST) Received: (from dan@localhost) by dan.emsphone.com (8.11.6/8.11.6) id fBSIxAm27397; Fri, 28 Dec 2001 12:59:10 -0600 (CST) (envelope-from dan) Date: Fri, 28 Dec 2001 12:59:09 -0600 From: Dan Nelson To: Simon Siemonsma Cc: Peter Ong , freebsd-questions@FreeBSD.ORG Subject: Re: Package or Ports CVSup Message-ID: <20011228185909.GF77887@dan.emsphone.com> References: <01f801c18f5e$558baf00$0101a8c0@haloflightleader.net> <200112281842.TAA03146@smtp.hccnet.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200112281842.TAA03146@smtp.hccnet.nl> User-Agent: Mutt/1.3.24i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Dec 28), Simon Siemonsma said: > Personally I think for big programs it's easier to use the packages. > It is avoiding a lot a compiling time. For small programs I prefer > the ports, because it's saving time to find out where the package is. You don't need to know where the package is; "pkg_add -r packagename" will fetch and install it automatically. -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11: 2:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dot.uber.com.br (ctbcnetsuper-146.xdsl-fixo.ctbcnetsuper.com.br [200.225.201.146]) by hub.freebsd.org (Postfix) with SMTP id CD40037B405 for ; Fri, 28 Dec 2001 11:01:50 -0800 (PST) Received: (qmail 17981 invoked from network); 28 Dec 2001 16:57:03 -0000 Received: from ctbcnetsuper-055.xdsl-dinamico.ctbcnetsuper.com.br (HELO uber.com.br) (200.225.205.55) by 0 with SMTP; 28 Dec 2001 16:57:03 -0000 Message-ID: <3C2CC35F.48ADB989@uber.com.br> Date: Fri, 28 Dec 2001 17:09:19 -0200 From: =?iso-8859-1?Q?Jos=E9?= Romildo Malaquias Organization: UFOP X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.4.9-13 i686) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Re: Keymap "us international" in console References: <3C2CBEB8.97CE4C59@uber.com.br> Content-Type: multipart/mixed; boundary="------------FEC02207ADB48D5713593CAB" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------FEC02207ADB48D5713593CAB Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit I forgot to attach the "US International" keymap file. Here it is. Romildo José Romildo Malaquias wrote: > Hello. > > In an attempt to have my US keyboard working with dead keys (the so > called "US International" keymap) I have installed the attached keymap > file /usr/share/syscons/keymaps/us.iso.acc.kbd which, provides support > for dead keys, and added a line with keymap="us.iso.acc.kbd" in > /etc/rc.conf. I have also configured the console font to be iso8859-1 > (font8x8="iso-8x8", font8x14="iso-8x14", font8x16="iso-8x16"). But > after rebooting my FreeBSD 4-4 system, I did not get the expected > behaviour. > > The system accepts the dead keys, but cannot combine them with > the vowels typed immediately after a dead key to build an > accented character. For instance, typing 'a I get a beep and no > á character, as it is expected. But if I type ' followed by an > space, I get the single quote ' character. > > Strangely, I am getting the same behaviour in a xterm window with > XFree86-4.1.0, which is setup to use the "us_intl" keyboard layout and > the pc105 keyboard geometry. > > Any clues? > > Romildo > > -- > Prof. José Romildo Malaquias Departamento de Computação > http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto > romildo@iceb.ufop.br Brasil > romildo@uber.com.br > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Prof. José Romildo Malaquias Departamento de Computação http://iceb.ufop.br/~romildo Universidade Federal de Ouro Preto romildo@iceb.ufop.br Brasil romildo@uber.com.br --------------FEC02207ADB48D5713593CAB Content-Type: text/plain; charset=us-ascii; name="us.iso.acc.kbd" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="us.iso.acc.kbd" # $FreeBSD: src/share/syscons/keymaps/us.iso.kbd,v 1.14.2.1 2000/07/18 00:47:53 ache Exp $ # alt # scan cntrl alt alt cntrl lock # code base shift cntrl shift alt shift cntrl shift state # ------------------------------------------------------------------ 000 nop nop nop nop nop nop nop nop O 001 esc esc esc esc esc esc debug esc O 002 '1' '!' nop nop '1' '!' nop nop O 003 '2' '@' nul nul '2' '@' nul nul O 004 '3' '#' nop nop '3' '#' nop nop O 005 '4' '$' nop nop '4' '$' nop nop O 006 '5' '%' nop nop '5' '%' nop nop O 007 '6' dcir rs rs '6' dcir rs rs O 008 '7' '&' nop nop '7' '&' nop nop O 009 '8' '*' nop nop '8' '*' nop nop O 010 '9' '(' nop nop '9' '(' nop nop O 011 '0' ')' nop nop '0' ')' nop nop O 012 '-' '_' us us '-' '_' us us O 013 '=' '+' nop nop '=' '+' nop nop O 014 bs bs del del bs bs del del O 015 ht btab nop nop ht btab nop nop O 016 'q' 'Q' dc1 dc1 'q' 'Q' dc1 dc1 C 017 'w' 'W' etb etb 'w' 'W' etb etb C 018 'e' 'E' enq enq 'e' 'E' enq enq C 019 'r' 'R' dc2 dc2 'r' 'R' dc2 dc2 C 020 't' 'T' dc4 dc4 't' 'T' dc4 dc4 C 021 'y' 'Y' em em 'y' 'Y' em em C 022 'u' 'U' nak nak 'u' 'U' nak nak C 023 'i' 'I' ht ht 'i' 'I' ht ht C 024 'o' 'O' si si 'o' 'O' si si C 025 'p' 'P' dle dle 'p' 'P' dle dle C 026 '[' '{' esc esc '[' '{' esc esc O 027 ']' '}' gs gs ']' '}' gs gs O 028 cr cr nl nl cr cr nl nl O 029 lctrl lctrl lctrl lctrl lctrl lctrl lctrl lctrl O 030 'a' 'A' soh soh 'a' 'A' soh soh C 031 's' 'S' dc3 dc3 's' 'S' dc3 dc3 C 032 'd' 'D' eot eot 'd' 'D' eot eot C 033 'f' 'F' ack ack 'f' 'F' ack ack C 034 'g' 'G' bel bel 'g' 'G' bel bel C 035 'h' 'H' bs bs 'h' 'H' bs bs C 036 'j' 'J' nl nl 'j' 'J' nl nl C 037 'k' 'K' vt vt 'k' 'K' vt vt C 038 'l' 'L' ff ff 'l' 'L' ff ff C 039 ';' ':' nop nop ';' ':' nop nop O 040 dacu duml nop nop dacu duml nop nop O 041 dgra dtil nop nop dgra dtil nop nop O 042 lshift lshift lshift lshift lshift lshift lshift lshift O 043 '\' '|' fs fs '\' '|' fs fs O 044 'z' 'Z' sub sub 'z' 'Z' sub sub C 045 'x' 'X' can can 'x' 'X' can can C 046 'c' 'C' etx etx 'c' 'C' etx etx C 047 'v' 'V' syn syn 'v' 'V' syn syn C 048 'b' 'B' stx stx 'b' 'B' stx stx C 049 'n' 'N' so so 'n' 'N' so so C 050 'm' 'M' cr cr 'm' 'M' cr cr C 051 ',' '<' nop nop ',' '<' nop nop O 052 '.' '>' nop nop '.' '>' nop nop O 053 '/' '?' nop nop '/' '?' nop nop O 054 rshift rshift rshift rshift rshift rshift rshift rshift O 055 '*' '*' '*' '*' '*' '*' '*' '*' O 056 lalt lalt lalt lalt lalt lalt lalt lalt O 057 ' ' ' ' nul ' ' ' ' ' ' susp ' ' O 058 clock clock clock clock clock clock clock clock O 059 fkey01 fkey13 fkey25 fkey37 scr01 scr11 scr01 scr11 O 060 fkey02 fkey14 fkey26 fkey38 scr02 scr12 scr02 scr12 O 061 fkey03 fkey15 fkey27 fkey39 scr03 scr13 scr03 scr13 O 062 fkey04 fkey16 fkey28 fkey40 scr04 scr14 scr04 scr14 O 063 fkey05 fkey17 fkey29 fkey41 scr05 scr15 scr05 scr15 O 064 fkey06 fkey18 fkey30 fkey42 scr06 scr16 scr06 scr16 O 065 fkey07 fkey19 fkey31 fkey43 scr07 scr07 scr07 scr07 O 066 fkey08 fkey20 fkey32 fkey44 scr08 scr08 scr08 scr08 O 067 fkey09 fkey21 fkey33 fkey45 scr09 scr09 scr09 scr09 O 068 fkey10 fkey22 fkey34 fkey46 scr10 scr10 scr10 scr10 O 069 nlock nlock nlock nlock nlock nlock nlock nlock O 070 slock slock slock slock slock slock slock slock O 071 fkey49 '7' '7' '7' '7' '7' '7' '7' N 072 fkey50 '8' '8' '8' '8' '8' '8' '8' N 073 fkey51 '9' '9' '9' '9' '9' '9' '9' N 074 fkey52 '-' '-' '-' '-' '-' '-' '-' N 075 fkey53 '4' '4' '4' '4' '4' '4' '4' N 076 fkey54 '5' '5' '5' '5' '5' '5' '5' N 077 fkey55 '6' '6' '6' '6' '6' '6' '6' N 078 fkey56 '+' '+' '+' '+' '+' '+' '+' N 079 fkey57 '1' '1' '1' '1' '1' '1' '1' N 080 fkey58 '2' '2' '2' '2' '2' '2' '2' N 081 fkey59 '3' '3' '3' '3' '3' '3' '3' N 082 fkey60 '0' '0' '0' '0' '0' '0' '0' N 083 del '.' '.' '.' '.' '.' boot boot N 084 nop nop nop nop nop nop nop nop O 085 nop nop nop nop nop nop nop nop O 086 nop nop nop nop nop nop nop nop O 087 fkey11 fkey23 fkey35 fkey47 scr11 scr11 scr11 scr11 O 088 fkey12 fkey24 fkey36 fkey48 scr12 scr12 scr12 scr12 O 089 cr cr nl nl cr cr nl nl O 090 rctrl rctrl rctrl rctrl rctrl rctrl rctrl rctrl O 091 '/' '/' '/' '/' '/' '/' '/' '/' N 092 nscr nscr debug debug nop nop nop nop O 093 ralt ralt ralt ralt ralt ralt ralt ralt O 094 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 fkey49 O 095 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 fkey50 O 096 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 fkey51 O 097 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 fkey53 O 098 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 fkey55 O 099 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 fkey57 O 100 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 fkey58 O 101 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 fkey59 O 102 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 fkey60 O 103 fkey61 fkey61 fkey61 fkey61 fkey61 fkey61 boot fkey61 O 104 slock saver slock saver susp nop susp nop O 105 fkey62 fkey62 fkey62 fkey62 fkey62 fkey62 fkey62 fkey62 O 106 fkey63 fkey63 fkey63 fkey63 fkey63 fkey63 fkey63 fkey63 O 107 fkey64 fkey64 fkey64 fkey64 fkey64 fkey64 fkey64 fkey64 O 108 nop nop nop nop nop nop nop nop O dgra '`' ( 'a' 224 ) ( 'A' 192 ) ( 'e' 232 ) ( 'E' 200 ) ( 'i' 236 ) ( 'I' 204 ) ( 'o' 242 ) ( 'O' 210 ) ( 'u' 249 ) ( 'U' 217 ) dacu ''' ( 'a' 225 ) ( 'A' 193 ) ( 'e' 233 ) ( 'E' 201 ) ( 'i' 237 ) ( 'I' 205 ) ( 'o' 243 ) ( 'O' 211 ) ( 'u' 250 ) ( 'U' 218 ) ( 'y' 253 ) ( 'Y' 221 ) ( 'c' 231 ) ( 'C' 199 ) dcir '^' ( 'a' 226 ) ( 'A' 194 ) ( 'e' 234 ) ( 'E' 202 ) ( 'i' 238 ) ( 'I' 206 ) ( 'o' 244 ) ( 'O' 212 ) ( 'u' 251 ) ( 'U' 219 ) dtil '~' ( 'a' 227 ) ( 'A' 195 ) ( 'n' 241 ) ( 'N' 209 ) ( 'o' 245 ) ( 'O' 213 ) dmac 000 dbre 000 ddot 000 duml '"' ( 'a' 228 ) ( 'A' 196 ) ( 'e' 235 ) ( 'E' 203 ) ( 'i' 239 ) ( 'I' 207 ) ( 'o' 246 ) ( 'O' 214 ) ( 'u' 252 ) ( 'U' 220 ) ( 'y' 255 ) dsla 000 drin 176 ( 'a' 229 ) ( 'A' 197 ) dced 184 ( 'c' 231 ) ( 'C' 199 ) dapo 000 ddac 000 dogo 000 dcar 000 --------------FEC02207ADB48D5713593CAB Content-Type: text/plain; charset=us-ascii; name="rc.conf" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="rc.conf" # -- sysinstall generated deltas -- # Wed Nov 21 23:26:11 2001 # Created: Wed Nov 21 23:26:11 2001 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. hostname="darling.home.br" kern_securelevel_enable="NO" linux_enable="YES" moused_enable="YES" moused_port="/dev/cuaa0" moused_type="auto" nfs_client_enable="YES" nfs_reserved_port_only="YES" sendmail_enable="YES" sshd_enable="YES" keyrate="fast" # PPPoE ppp_enable="YES" ppp_mode="ddial" ppp_nat="YES" ppp_profile="uber" # System console options allscreens_flags="VGA_90x30" keymap="us.iso.acc" font8x8="iso-8x8" font8x14="iso-8x14" font8x16="iso-8x16" --------------FEC02207ADB48D5713593CAB-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11: 6:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 9F55437B41B for ; Fri, 28 Dec 2001 11:06:15 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K2Kc-0005Da-00 for questions@FreeBSD.ORG; Fri, 28 Dec 2001 19:06:14 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 2AD1A116E; Fri, 28 Dec 2001 20:06:13 +0100 (CET) Date: Fri, 28 Dec 2001 20:06:13 +0100 From: Cliff Sarginson To: FreeBSD Questions Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228190613.GB1122@raggedclown.net> References: <20011228181009.F95692@monorchid.lemis.com> <20011228133613.D25749@freebie.xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228133613.D25749@freebie.xs4all.nl> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 01:36:13PM +0100, Wilko Bulte wrote: > On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: > > I've been using AMD processors almost exclusively in my main work > > machines for over 4 years, and I've been very happy with them. I'm > > currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and > > an Athlon XP 1700. Last August, though, I bought a machine which gave > > me a lot of trouble, the Duron 850 mentioned above. I found that it > > would freeze for no apparent reason. I established that it wasn't the > > memory by taking the memory of another machine and running it like > > that; it made no difference. I ended up also changing the motherboard > > and the processor, but the hangs continued. I could expect a hang > > within 8 hours when doing 'make release' > > What I noticed for socketA boards is that they tend to be extremely picky > about the memory you feed them. And this is not an ElCheapo mainboard, > this is an Asus. Asus is my experience has good mainboards. > All sorts of weird crashes, sometimes only after hours of buildworld-stress > testing. Keeping everything else the same but swapping the memory > solved the issue once and for all. > I believe there is also an issue with some of the high-end Athlons running very hot. Co-incidentally I noticed in a local computer shop the other day a warning about using the right coolers for AMD processors. Next time it goes AWOL see what the Bios thinks the temperature is (if it has that possibility in it, mine does). Someone on a linux list I am on was reporting temperatures >100C !! -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:11: 1 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 7636E37B41A for ; Fri, 28 Dec 2001 11:10:58 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K2PB-0006fA-00 for questions@FreeBSD.ORG; Fri, 28 Dec 2001 19:10:57 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 25AE4116E; Fri, 28 Dec 2001 20:10:55 +0100 (CET) Date: Fri, 28 Dec 2001 20:10:55 +0100 From: Cliff Sarginson To: FBSD Questions Subject: Re: command line web browsers Message-ID: <20011228191055.GC1122@raggedclown.net> References: <20011228135954.GA43896@rhadamanth> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228135954.GA43896@rhadamanth> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 01:59:54PM +0000, Ceri wrote: > On Fri, Dec 28, 2001 at 07:43:44AM -0600, Robert D. Hughes wrote: > > > > From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] > > > >> Any suggestions for command line web browsers? > > > If you mean text-mode, Lynx is very good, and is installed by default. > > It's not installed by default, but it is good. > It's the default browser, but it isn't installed by default. Someone tried to explain this mystery to me, but I have forgotten what it was. Licensing or some such probably. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:16:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dns.pacang.com (adsl-63-193-245-242.dsl.snfc21.pacbell.net [63.193.245.242]) by hub.freebsd.org (Postfix) with ESMTP id C179437B41E for ; Fri, 28 Dec 2001 11:16:40 -0800 (PST) Received: (from bservies@localhost) by dns.pacang.com (8.9.3/8.9.2) id LAA06278 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 11:16:40 -0800 Date: Fri, 28 Dec 2001 11:16:40 -0800 From: Byron Servies To: freebsd-questions@freebsd.org Subject: system calls and utf8 Message-ID: <20011228111640.G5827@pacang.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm working on a bug with the NetWorker 6.0.2 port to freebsd concerning files with umaluts. An example filename (using octal escapes) would be umlauts_are_\366\344\374 My question: when I get this string back from readdir, what is this encoding? None? ANSI wide char? UTF8? NetWorker is performing some conversions that are inappropriate, but I need to know what is appropriate in order to fix them... Thanks, Byron To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:21:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 3BCC437B421 for ; Fri, 28 Dec 2001 11:21:08 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K2Z1-0005Wn-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 19:21:07 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 448D0116E; Fri, 28 Dec 2001 20:21:05 +0100 (CET) Date: Fri, 28 Dec 2001 20:21:05 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Software Recommendations Message-ID: <20011228192105.GD1122@raggedclown.net> References: <20011228161828.04659da7.johann@broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228161828.04659da7.johann@broadpark.no> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 04:18:28PM +0100, Johann Sharizan wrote: > Are there any websites or something similar out there, listing the most popular software for a task, recommended by experienced gurus? > > This is my 2nd try posting this question, I hope it made more sense. > Mmm. The question makes sense, but is it a sensible question ? "Gurus" ought te be a banned word, your question would be answerable if you asked more specifically what task(s) you are trying to achieve. (how are you going to know who to believe anyway ? If you say I want to create a simple relational database (for example), you will get a few people telling you the pro's and con's according to their experience. For most tasks their are a lot of tools and a lot of opinions. For example I cannot imagine why anyone in their right mind still uses "sendmail" as their MTA (again, just an example), so I would recommend Postfix if you asked me about MTA's. Someone else might say he implemented his own in APL and you should do the same. Ask a more specific question. Om mani padme hum. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:25: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom00.kundenserver.de (moutvdom00.kundenserver.de [195.20.224.149]) by hub.freebsd.org (Postfix) with ESMTP id A993B37B419 for ; Fri, 28 Dec 2001 11:25:00 -0800 (PST) Received: from [172.19.20.61] (helo=mrvdomng0.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16K2cl-0002bM-00; Fri, 28 Dec 2001 20:24:59 +0100 Received: from pd901720b.dip.t-dialin.net ([217.1.114.11]) by mrvdomng0.kundenserver.de with esmtp (Exim 3.22 #2) id 16K2cl-0006np-00; Fri, 28 Dec 2001 20:24:59 +0100 Date: Fri, 28 Dec 2001 19:23:59 +0000 (GMT) From: "P. U. (Uli) Kruppa" X-X-Sender: To: Cliff Sarginson Cc: Subject: Re: Package or Ports CVSup In-Reply-To: <20011228185657.GA1122@raggedclown.net> Message-ID: <20011228191429.K5419-100000@big> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Remember FreeBSD is a multitasking OS: You can still work on your computer during compilation (For example you could type your translation of "War and Peace" into a tex-file ... ...or you could simply go to bed and let it compile by itself. Though - sometimes - I like watching all the gcc ... -o ... > /dev/null running across my screen :-) Regards, Uli. On Fri, 28 Dec 2001, Cliff Sarginson wrote: > I usually use the ports, it's kind of satisfying to know it's all > compiling along merrily. > > However X/KDE, as pointed out below takes an incredible length of time. > I compiled it on a 1Ghz Pentium with 512MB memory off of a SCSI > disk installation .. I also translated the whole of War and Peace into > Latvian at the same time. It is *big*. > > -- > Regards > Cliff > > On Fri, Dec 28, 2001 at 07:47:23PM +0000, Simon Siemonsma wrote: > > Personally I think for big programs it's easier to use the packages. It is > > avoiding a lot a compiling time. For small programs I prefer the ports, > > because it's saving time to find out where the package is. > > Building X or KDE from the ports is not a nice experience. CVSup actually is > > not that bad. > > > > Simon Siemonsma > > > > On Friday 28 December 2001 05:13, you wrote: > > > Question: > > > Do you guys usually build from the ports or install from packages the CVSup > > > tool? > > > > > > This is my first time installing CVSup. I went to /usr/ports/net/cvsup, > > > and then I hit make. It's downloading all kinds of stuff like XFree86 > > > parts. And it's still continuing on the compile. It's taking over an hour > > > now. Do you guys normally install CVSup from package or port? Just want > > > to find out the common practice. > > > > > > Thanks. > > > > > > Peter > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-stable" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > ************************************ * P. U. Kruppa - Wuppertal * * Germany * * www.pukruppa.de www.2000d.de * ************************************ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:26:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id BABEF37B417 for ; Fri, 28 Dec 2001 11:26:36 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K2eJ-0005h5-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 19:26:35 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id 467D1116E; Fri, 28 Dec 2001 20:26:34 +0100 (CET) Date: Fri, 28 Dec 2001 20:26:34 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: su question/concern Message-ID: <20011228192634.GE1122@raggedclown.net> References: <20011228182837.T34176-100000@brazil.webair.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228182837.T34176-100000@brazil.webair.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:33:55PM +0000, Brian Hourigan wrote: > Good afternoon, > > I have found some behavior of 'su' to be questionable. > > Since it was out of my scroll buffer, I've typed my terminal session: > > %/usr/bin/su > Can't load /usr/lib/libutil-3.so > %/usr/bin/su > Can't load /usr/lib/libutil-3.so > %/usr/bin/su > Can't make pipe. > %/usr/bin/su > Can't make pipe. > %/usr/bin/su > You have mail. > orion# > > pstat -T indicated I was intermittently out of files, there had been many > sendmails for a cron process running, along with busy apache/ftpd. > Errm. So what was the question ? -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:31: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cx2037703-a.kenner1.la.home.com (cx2037703-a.kenner1.la.home.com [24.39.27.145]) by hub.freebsd.org (Postfix) with ESMTP id 5B42E37B41A for ; Fri, 28 Dec 2001 11:30:58 -0800 (PST) Received: (from conrads@localhost) by cx2037703-a.kenner1.la.home.com (8.11.6/8.11.6) id fBSJTIJ64664; Fri, 28 Dec 2001 13:29:18 -0600 (CST) (envelope-from conrads) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Fri, 28 Dec 2001 13:29:17 -0600 (CST) Organization: @Home Network From: Conrad Sabatier To: Matt Lazarou Subject: Re: Regarding FreeBSD 4.4-Stable Cc: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Note: in the future, it would be a good idea to make your subject lines a little more specific when you have a question. On 20-Dec-2001 Matt Lazarou wrote: > So when i type: > startx "as root" to start the x server from the terminal i then get this > message: > /usr/libexec/ld-elf.so.1: Shared object "libXpm.so.4" not found Perhaps you deleted the xpm libraries/package? Or upgraded to a newer version? Is there ANY version of libXpm on your system? > Another thing i'm not sure how many other freebsd users out there run > a "OpenNap Server" but since i rebooted i cant start it up. For some > reason the pid file is missing, and when i execute the command > opennap -b to start the server in the background says command not found > and this is occuring due to no pid file in the /opennap directory. I'd say this is most likely occurring because /usr/local/sbin is not in your PATH ("command not found" is a pretty good clue). -- Conrad Sabatier Stult's Report: Our problems are mostly behind us. What we have to do now is fight the solutions. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:32:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f168.pav1.hotmail.com [64.4.31.168]) by hub.freebsd.org (Postfix) with ESMTP id AA18E37B41A for ; Fri, 28 Dec 2001 11:32:37 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 28 Dec 2001 11:32:37 -0800 Received: from 217.127.142.204 by pv1fd.pav1.hotmail.msn.com with HTTP; Fri, 28 Dec 2001 19:32:37 GMT X-Originating-IP: [217.127.142.204] From: "adri lopez" To: freebsd-questions@FreeBSD.ORG Subject: spanish: ports Date: Fri, 28 Dec 2001 20:32:37 +0100 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed Message-ID: X-OriginalArrivalTime: 28 Dec 2001 19:32:37.0405 (UTC) FILETIME=[680584D0:01C18FD6] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Querria saber si en alguna próxima versión de Freebsd se piensa poner los ports de alguna forma para que puedan tener resume. Gracias. _________________________________________________________________ MSN Photos es la manera más sencilla de compartir, editar e imprimir sus fotos favoritas. http://photos.latam.msn.com/Support/WorldWide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:34:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 4185F37B4CF for ; Fri, 28 Dec 2001 11:34:36 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP2JTK02.664 for ; Fri, 28 Dec 2001 20:36:56 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP2JIV01.553 for ; Fri, 28 Dec 2001 20:30:31 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBSJZ4j09829 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 20:35:04 +0100 (CET) (envelope-from juli) Date: Fri, 28 Dec 2001 20:35:04 +0100 From: Julio Merino To: freebsd-questions@freebsd.org Subject: Program to "guess" phone number? Message-ID: <20011228203504.F728@klamath.local> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="4VrXvz3cwkc87Wze" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --4VrXvz3cwkc87Wze Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all Is it there any program that will answer the phone or hang it (with the modem, of course) only if the call comes from a _specific_ phone number? Can the number be determined? Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --4VrXvz3cwkc87Wze Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8LMlozz00ZOPKycwRAlYiAKCOEJPpqcPY/QbWzD5u44PodRgfqQCfS1eG mRymbCtbg+abvjBajQHYDYo= =mXo+ -----END PGP SIGNATURE----- --4VrXvz3cwkc87Wze-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:47:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 31B6C37B420 for ; Fri, 28 Dec 2001 11:47:56 -0800 (PST) Received: from sdn-ar-004dcwashp273.dialsprint.net ([206.133.15.203] helo=moo.holy.cow) by falcon.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16K2yw-0006yQ-00; Fri, 28 Dec 2001 11:47:55 -0800 Received: by moo.holy.cow (Postfix, from userid 1001) id D975550E29; Fri, 28 Dec 2001 14:49:45 -0500 (EST) Date: Fri, 28 Dec 2001 14:49:45 -0500 From: parv To: Simon Siemonsma Cc: Peter Ong , freebsd-questions@freebsd.org Subject: Re: Package or Ports CVSup Message-ID: <20011228144945.B11661@moo.holy.cow> Mail-Followup-To: Simon Siemonsma , Peter Ong , freebsd-questions@freebsd.org References: <01f801c18f5e$558baf00$0101a8c0@haloflightleader.net> <200112281842.TAA03146@smtp.hccnet.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200112281842.TAA03146@smtp.hccnet.nl>; from s.siemonsma@hccnet.nl on Fri, Dec 28, 2001 at 07:47:23PM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message <200112281842.TAA03146@smtp.hccnet.nl>, wrote Simon Siemonsma thusly... > > Personally I think for big programs it's easier to use the packages. > It is avoiding a lot a compiling time. ... > Building X or KDE from the ports is not a nice experience. to me, time is not much of a worry as much as disk space and missing dependencies are. i have to get creative (on disk space management) whenever i compile X. it's actually a satisfying and enlightening experience (in software design) when a time consuming compile process completes w/o any problems. -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:49: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id DA0D137B41C for ; Fri, 28 Dec 2001 11:49:04 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16K303-0006D0-00 for freebsd-questions@freebsd.org; Fri, 28 Dec 2001 19:49:04 +0000 Received: by tanya.raggedclown.net (Postfix, from userid 500) id F0E61116E; Fri, 28 Dec 2001 20:49:02 +0100 (CET) Date: Fri, 28 Dec 2001 20:49:02 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Program to "guess" phone number? Message-ID: <20011228194902.GA2061@raggedclown.net> References: <20011228203504.F728@klamath.local> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228203504.F728@klamath.local> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 08:35:04PM +0100, Julio Merino wrote: > Hi all > > Is it there any program that will answer the phone or hang it (with the > modem, of course) only if the call comes from a _specific_ phone number? > Can the number be determined? > Mmm, I think that depends on what your phone company does as much as anything else. I have an ISDN phone with 4 numbers associated with it and which one I get phoned on gets logged on my PC (even though I do not have incoming calls enabled). As a corollorary to that (and more relevant to your question) it again depends on whether the number of the person phoning you is "visible". Here in Holland my phone displays the number of the person calling, but the caller can easily suppress that ability by typing in a special code. In short you should be able to do it somehow with ISDN, but with ordinary analog lines I have no idea. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:57:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from stereophonic.noops.org (adsl-63-195-97-84.dsl.snfc21.pacbell.net [63.195.97.84]) by hub.freebsd.org (Postfix) with SMTP id 45B0237B41E for ; Fri, 28 Dec 2001 11:56:59 -0800 (PST) Received: (qmail 14242 invoked by uid 1000); 28 Dec 2001 19:57:00 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 28 Dec 2001 19:57:00 -0000 Date: Fri, 28 Dec 2001 11:57:00 -0800 (PST) From: Thomas Cannon To: Julio Merino Cc: Subject: Re: Program to "guess" phone number? In-Reply-To: <20011228203504.F728@klamath.local> Message-ID: <20011228115219.D13504-100000@stereophonic.noops.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Caller ID, combined with mgetty will do that. Install the port and check out /usr/local/etc/mgetty+sendfax/dialin.config for more info. The basic gist, though, is that yes you can do it, and the syntax is easy, and even better -- mgetty isn't too tough to set up. I managed to set up my home desktop/DSL as a backup dialin ISP so I could use my cell phone modem and laptop and get my mail from the coffee shop up the street at a screaming 9600 baud. Where there's a will... ;-) -thomas On Fri, 28 Dec 2001, Julio Merino wrote: > Hi all > > Is it there any program that will answer the phone or hang it (with the > modem, of course) only if the call comes from a _specific_ phone number? > Can the number be determined? > > Thanks! > > -- > La ignorancia es la felicidad. > > Julio Merino (Slink) > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 11:58:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id A541737B43A for ; Fri, 28 Dec 2001 11:57:53 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP2KWJ01.75B for ; Fri, 28 Dec 2001 21:00:19 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP2KLT01.65H for ; Fri, 28 Dec 2001 20:53:53 +0100 Received: (from juli@localhost) by klamath.local (8.11.6/8.11.6) id fBSJwNn24856 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 20:58:23 +0100 (CET) (envelope-from juli) Date: Fri, 28 Dec 2001 20:58:23 +0100 From: Julio Merino To: freebsd-questions@FreeBSD.ORG Subject: Re: Program to "guess" phone number? Message-ID: <20011228205823.A24685@klamath.local> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20011228203504.F728@klamath.local> <20011228194902.GA2061@raggedclown.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="W/nzBZO5zC0uMSeA" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228194902.GA2061@raggedclown.net>; from cliff@raggedclown.net on Fri, Dec 28, 2001 at 08:49:02PM +0100 X-Operating-System: FreeBSD klamath.local 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --W/nzBZO5zC0uMSeA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 28, 2001 at 08:49:02PM +0100, Cliff Sarginson wrote: > On Fri, Dec 28, 2001 at 08:35:04PM +0100, Julio Merino wrote: > > Mmm, I think that depends on what your phone company does as much as > anything else. I have an ISDN phone with 4 numbers associated with it > and which one I get phoned on gets logged on my PC (even though I do > not have incoming calls enabled). As a corollorary to that (and more > relevant to your question) it again depends on whether the number > of the person phoning you is "visible". Here in Holland my phone > displays the number of the person calling, but the caller can easily > suppress that ability by typing in a special code. >=20 > In short you should be able to do it somehow with ISDN, but with > ordinary analog lines I have no idea. I guess I can do it with an ordinary line. Here at spain, the phone company gives away some phones that show the incoming phone number, so I guess I would do it. The problem is that... which program can I use under FreeBSD? Thanks! >=20 >=20 > --=20 > Regards > Cliff >=20 >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --=20 La ignorancia es la felicidad. Julio Merino (Slink) --W/nzBZO5zC0uMSeA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8LM7fzz00ZOPKycwRAtvQAJ4vg4ILLhr3fduSMaxwPRtI7OhY6QCgmA15 1hNfkvTibACqE+cE4JskI90= =Xah1 -----END PGP SIGNATURE----- --W/nzBZO5zC0uMSeA-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:16:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.XtremeDev.com (xtremedev.com [216.241.38.65]) by hub.freebsd.org (Postfix) with ESMTP id DE24837B416 for ; Fri, 28 Dec 2001 12:16:52 -0800 (PST) Received: from xtremedev.com (xtremedev.com [216.241.38.65]) by mail.XtremeDev.com (Postfix) with ESMTP id 4BDC970607; Fri, 28 Dec 2001 13:16:46 -0700 (MST) Date: Fri, 28 Dec 2001 13:16:46 -0700 (MST) From: FreeBSD user To: Stephen Hovey Cc: Joe & Fhe Barbish , OutBack Dingo , FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: Message-ID: <20011228131453.C27722-100000@Amber.XtremeDev.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG So set it up as a transparent proxy. Port forward all outbound connects to port 80 to your local proxy port. On Fri, 28 Dec 2001, Stephen Hovey wrote: > but then that requires gettin all the users to set up for proxy usage. > > On Thu, 27 Dec 2001, Joe & Fhe Barbish wrote: > > > So you don't reinvent the wheel, install the Junkbuster http proxy server > > port. It allows you to filter out files by address and regular expressions. > > See if it has some kind of database all ready populated, then all you have > > to do is get a ip address deny list from some other package maybe for > > windows and convert it to Junkbuster format. Junkbuster or some other http > > proxy server is the place to start. Do the research and post your results. > > Mayby junkbuster has a development that you can join or suggest changes to. > > > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of OutBack Dingo > > Sent: Thursday, December 27, 2001 4:10 PM > > To: Stephen Hovey > > Cc: Simon Siemonsma; Anthony Atkielski; freebsd-questions@FreeBSD.ORG > > Subject: Re: Block WWW advertizing banners & auto spawn web pages > > usingipfilt er or ipfw > > > > Well its a task I think id like to host/take on, now who wants to join > > in supporting/coding it ?? > > > > On Thu, 2001-12-27 at 15:06, Stephen Hovey wrote: > > > Someone should start a popup:ip:advert DNS site like the email blackhole > > > list! > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:27: 5 2001 Delivered-To: freebsd-questions@freebsd.org Received: from raven.ravenbrook.com (raven.ravenbrook.com [193.82.131.18]) by hub.freebsd.org (Postfix) with ESMTP id 8592B37B425 for ; Fri, 28 Dec 2001 12:27:01 -0800 (PST) Received: from thrush.ravenbrook.com (thrush.ravenbrook.com [193.112.141.249]) by raven.ravenbrook.com (8.11.6/8.11.3) with ESMTP id fBSKQui11451 for ; Fri, 28 Dec 2001 20:26:56 GMT (envelope-from nb@ravenbrook.com) Received: from thrush.ravenbrook.com (localhost [127.0.0.1]) by thrush.ravenbrook.com (8.11.6/8.11.6) with ESMTP id fBSKQkA70663 for ; Fri, 28 Dec 2001 20:26:46 GMT (envelope-from nb@thrush.ravenbrook.com) From: Nick Barnes To: freebsd-questions@freebsd.org Subject: FreeBSD for home security cameras? Date: Fri, 28 Dec 2001 20:26:46 +0000 Message-ID: <70661.1009571206@thrush.ravenbrook.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My house was burgled just before Christmas. Next time this happens, it would be satisfying to present the police with pictures of the villains in the act of carting off our TV in our wheelbarrow, or ransacking our CD collection. I'm thinking a few cheapo cameras, inside and out, hooked up to a server in an inaccessible spot (e.g. the attic) or off-site, after I get a cable modem. I would prefer FreeBSD on the server. What's the economic way of building a system like this? Nick Barnes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:31:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cliff.mfn.org (cliff.mfn.org [204.238.179.8]) by hub.freebsd.org (Postfix) with ESMTP id 3845037B423 for ; Fri, 28 Dec 2001 12:31:52 -0800 (PST) Received: from greeves.mfn.org (greeves.mfn.org [204.238.179.3]) by cliff.mfn.org (8.11.1/8.9.3) with ESMTP id fBSKVZI03712 for ; Fri, 28 Dec 2001 14:31:38 -0600 (CST) (envelope-from measl@mfn.org) Date: Fri, 28 Dec 2001 14:31:35 -0600 (CST) From: To: freebsd-questions@freebsd.org Subject: Disabling KLDs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Greetings, In the 3.x days you could specify an "options" statement to disable kernel LKM functionality. I have looked in the kernel LINT, and the man pages / handbook, and see no equivalent for disabling KLDs. Is there any "clean" way to do this, or do I need to go through the source tree and start cutting? Please reply directly, as I am not subscribed to "questions". Thanks! -- Yours, J.A. Terranson sysadmin@mfn.org If Governments really want us to behave like civilized human beings, they should give serious consideration towards setting a better example: Ruling by force, rather than consensus; the unrestrained application of unjust laws (which the victim-populations were never allowed input on in the first place); the State policy of justice only for the rich and elected; the intentional abuse and occassionally destruction of entire populations merely to distract an already apathetic and numb electorate... This type of demogoguery must surely wipe out the fascist United States as surely as it wiped out the fascist Union of Soviet Socialist Republics. The views expressed here are mine, and NOT those of my employers, associates, or others. Besides, if it *were* the opinion of all of those people, I doubt there would be a problem to bitch about in the first place... -------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:36:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from square.cnd.mcgill.ca (square.CND.McGill.CA [132.206.114.119]) by hub.freebsd.org (Postfix) with ESMTP id 47E4B37B41E for ; Fri, 28 Dec 2001 12:36:45 -0800 (PST) Received: (from mat@localhost) by square.cnd.mcgill.ca (8.9.3/8.9.3) id PAA81790; Fri, 28 Dec 2001 15:36:43 -0500 (EST) (envelope-from mat) Date: Fri, 28 Dec 2001 15:36:43 -0500 From: Mathew Kanner To: James McNaughton Cc: Mathew Kanner , freebsd-questions@freebsd.org Subject: Re: x11 ssh forwarding 'uses different protocol' Message-ID: <20011228153643.A60778@cnd.mcgill.ca> References: <20011204192024.A92765@cnd.mcgill.ca> <863d1wq9ev.fsf@jamestown.21stcentury.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: James McNaughton's message [Re: x11 ssh forwarding 'uses different protocol'] as of Thu, Dec 27, 2001 at 10:02:32PM -0600 Organization: I speak for myself, operating in Montreal, CANADA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Dec 27, James McNaughton wrote: > Mathew Kanner writes: [....] > Perhaps try slogin -X hostess.with.the.mostest > > If it worked by default before, then it may have been enabled in a > configuration file as per-host X11 access is possible this way. Negative. I was trying to do x11 forwarding but it was getting confused. I think that it's just plain broken. -stable has some updates but I don't know if they fix the problem. Installing the comercial ssh was the best solution that I could find. --Mat -- Brain: Pinky, are you pondering what I'm pondering? Pinky: I think so Brain, but if Jimmy cracked corn, and no one cares, why does he keep doing it? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:40:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from apollo.netsonic.net (netsonic.cc [207.250.84.2]) by hub.freebsd.org (Postfix) with ESMTP id 09D5A37B405 for ; Fri, 28 Dec 2001 12:40:07 -0800 (PST) Received: from localhost (adam2@localhost) by apollo.netsonic.net (8.11.6/8.11.3) with ESMTP id fBSKe7s85252 for ; Fri, 28 Dec 2001 14:40:07 -0600 (CST) (envelope-from adam2@netsonic.net) Date: Fri, 28 Dec 2001 14:40:05 -0600 (CST) From: "Adam L. Simpson" To: Subject: Upgrade to 4.4 stable and Miva Merchant problem In-Reply-To: <20011228062351.GG12190@raggedclown.net> Message-ID: <20011228143322.V84535-100000@apollo.netsonic.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello.. We upgraded an older server to 4.4 stable from 2.2.8 stable - basically a fresh install and restore for all intents and purposes - One of the sites we have on this server has Miva Merchant. After we moved the site, the access to the admin application no longer works. The old server the user and passwords work fine. New server, no joy. Supposedly the encryption is miva uses CRYPT system function. Ive got des and md5 setup on that new machine. We must be missing somthing here.. anyone have any possible suggestions as to why the encypted passes may not be working and a possible fix? Thanks Much. Adam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:46:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dc-mx04.cluster1.charter.net (dc-mx04.cluster0.hsacorp.net [209.225.8.14]) by hub.freebsd.org (Postfix) with ESMTP id CD98A37B405; Fri, 28 Dec 2001 12:46:19 -0800 (PST) Received: from [24.158.214.244] (HELO gforce.johnson.home) by dc-mx04.cluster1.charter.net (CommuniGate Pro SMTP 3.4.6) with ESMTP id 743842; Fri, 28 Dec 2001 15:52:34 -0500 Received: (from glenn@localhost) by gforce.johnson.home (8.11.6/8.11.6) id fBSKkCR01371; Fri, 28 Dec 2001 14:46:12 -0600 (CST) (envelope-from glenn) From: Glenn Johnson Date: Fri, 28 Dec 2001 14:46:12 -0600 To: Greg Lehey Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228204612.GA1226@gforce.johnson.home> Mail-Followup-To: glenn@FreeBSD.ORG, Greg Lehey , FreeBSD Questions , FreeBSD Hackers References: <20011228181009.F95692@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228181009.F95692@monorchid.lemis.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: > I've been using AMD processors almost exclusively in my main work > machines for over 4 years, and I've been very happy with them. I'm > currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and > an Athlon XP 1700. Last August, though, I bought a machine which gave > me a lot of trouble, the Duron 850 mentioned above. I found that it > would freeze for no apparent reason. I established that it wasn't the > memory by taking the memory of another machine and running it like > that; it made no difference. I ended up also changing the motherboard > and the processor, but the hangs continued. I could expect a hang > within 8 hours when doing 'make release' > > Just for the fun of it, I tried running Linux on it. I've been > running a kernel build and 'make clean' on it now for 36 hours, and > it's still running fine. Yesterday some Linux friends of mine came > around and looked at it and told me that the Linux kernel I was > running on the machine (2.4.16) had had a number of AMD-specific > fixes put in. He didn't go into more detail, unfortunately, but I'll > ask him again when I have time: it could be something relating to > chipset bugs we have seen and fixed. It would help to know, though, > if other people are experiencing similar problems. Please let me > know if you're having problems with AMD processors which seem to be > specific to FreeBSD, especially if they're hangs (i.e. the machine > stops reacting, but the display still shows the last state, it doesn't > reboot or panic). I have had this exact problem. I have an Epox 8KTA board with a 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would consistently get random errors, usually during a compilation, using the default BIOS settings. After fiddling with some of the BIOS options, such as enabling PCI burst, the system runs pretty stable. However, occasionally I will get that freeze that you refer to during a buildworld. As far as I can tell though if I set the memory clock to 100MHz the problem goes away completely, or at least I have not observed it happen yet. It is really hard for me to say if this is FreeBSD specific because I do not tend to stress the system much when I have Linux running. My wife has an identical system running Windows 98SE and she has no problems but I know that I have installed software from Epox that specifically addresses some issues with the VIA chipset so that may be why. -- Glenn Johnson glennpj@charter.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:56:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rpi.edu (mail.rpi.edu [128.113.22.40]) by hub.freebsd.org (Postfix) with ESMTP id 0D6BE37B421 for ; Fri, 28 Dec 2001 12:56:22 -0800 (PST) Received: from [128.113.24.47] (gilead.acs.rpi.edu [128.113.24.47]) by mail.rpi.edu (8.11.3/8.11.3) with ESMTP id fBSKuKJ59116; Fri, 28 Dec 2001 15:56:20 -0500 Mime-Version: 1.0 X-Sender: drosih@mail.rpi.edu Message-Id: In-Reply-To: <6b.20105b14.295d294d@aol.com> References: <6b.20105b14.295d294d@aol.com> Date: Fri, 28 Dec 2001 15:56:17 -0500 To: Vitman3852@aol.com, FreeBSD-questions@FreeBSD.ORG From: Garance A Drosihn Subject: Re: lpd / rc.conf problem Content-Type: text/plain; charset="us-ascii" ; format="flowed" X-Scanned-By: MIMEDefang 2.1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 8:47 PM -0500 12/27/01, Vitman3852@aol.com wrote: >I am using "pnm2ppa" and a HP 712C. If I start lpd from a command >line, everthing is fine. When lpd is started from rc.conf, everthing >is NOT fine. No print. I've been over the man pages and pnm2ppa docs >and I haven't found anything. > >Any ideas? I do not know about pnm2ppa or HP 712c's, but what are the symptoms you see when you have lpd started from rc.conf? Does lpd itself run OK? If you send a job to the printer, does the lpd start a task for that job/printer, and the job "disappears"? Or does lpd cease running? You have an 'if=' filter set in your printcap file? If the filter is running OK when started by hand, then it's probably something subtle in the environment which is different. Have the filter print out it's environment into some logfile, and see what's different. It wouldn't surprise me if the problem was that the setting of PATH is different, and that the filter needs to pull something out of /usr/local/bin or something like that. -- Garance Alistair Drosehn = gad@eclipse.acs.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 12:59:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 22E1A37B419; Fri, 28 Dec 2001 12:59:02 -0800 (PST) Received: from ppp10-113.ath.forthnet.gr Bernie_X@smtp-send.myrealbox.com [213.16.157.113] by smtp-send.myrealbox.com with Novell NIMS $Revision: 2.88 $ on Novell NetWare via secured & encrypted transport (TLS); Fri, 28 Dec 2001 13:58:56 -0700 Date: Fri, 28 Dec 2001 20:47:06 +0000 (GMT Standard Time) From: Bernie To: "Crist J . Clark" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Easy Questions -- newcomer In-Reply-To: <20011227173104.L2090@blossom.cjclark.org> Message-ID: X-X-Sender: Bernie_X@imap.myrealbox.com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thank you so much for your help. And for the redirection thing. Now if i get errors on custom kernel compilation, i'll be able to send more specific stuff. i see in the freebsd-stable list archive there is a call for testing on the 4.5. So, since i got caught-up in this, i'll pull the kernel-config file that i had on 4.3 and was working and comile it on 4.5, and who knows...i might contribute something on the testing... Anyway, thanks a lot for all the help. Take care, Berinie On Thu, 27 Dec 2001, Crist J . Clark wrote: > On Fri, Dec 28, 2001 at 12:32:24AM +0000, Bernie wrote: > [snip] > > > 1. Is it possible that while doing cvsup i got the server in the > > middle of updating and got out of sync sources? Is there any way > > to ensure that this doesnt happen? > > It is possible, but very rare. > > > 2. How can i redirect the output of 'make' in c-shell with stdout > > in one file and stderr in another? i thied this: > > make >make_stdout.txt 2>make_stderr.txt > > but i got messg ambigus redirection. i suspect that the above works > > for bash only (or maybe not). > > sh, bash, ksh, and some others, but not csh-like ones. > > > In any case, what's the equivalent for > > tcsh? > > $ ( make > make_stdout.txt ) >& make_stderr.txt > > > 3. The ports collection, is there a tree for each version ie a tree > > for 4.3, another for 4.4 etc? For example, if i got 4.3 and get the > > ports tree of 4.4 or 4.5 am i gonna get trouble? is there any rule > > for that? > > There are no branches on the ports collection, only HEAD. > > > 4. Ports can take too long sometimes (download + compile). Is there > > any advantage of compiling ports instead of tracking and downloading > > the packages for a given app? packages seem faster. > > Use ports if there are customizations you wish to make during the > compile process. Ports are more quickly and frequently updated than > packages, check version numbers. Other than that, building a port on > your own system is just warm fuzzies, no real advantage over > packages. > -- > "It's always funny until someone gets hurt. Then it's hilarious." > > Crist J. Clark | cjclark@alum.mit.edu > | cjclark@jhu.edu > http://people.freebsd.org/~cjc/ | cjc@freebsd.org > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13: 4:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from idscc05.onewest.net (idscc16.onewest.net [199.104.81.31]) by hub.freebsd.org (Postfix) with ESMTP id EA8DF37B422 for ; Fri, 28 Dec 2001 13:04:50 -0800 (PST) Received: from terry (du212.idfl-223.onewest.net [12.7.223.212] (may be forged)) by idscc05.onewest.net (8.11.2/8.11.2) with SMTP id fBSL0YT06746 for ; Fri, 28 Dec 2001 14:00:34 -0700 Message-ID: <00ab01c18fea$07c736e0$0400a8c0@terry> From: "printery-blkft" To: Subject: 3c509 nic, kernel, resulting confusion??? Date: Fri, 28 Dec 2001 13:53:03 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm running 4.4 stable with a 3c509c nic, i've csvuped and went thru buildworld, etc. with no errors and i've been trying to get it set up for over a week now and i've not been successful. I have a 56k frame with 16 ip#'s and a rh box connected to a cisco router that's up and i'm trying to get my fbsd box hooked via the switch to it too but it won't even ping 127.0.0.1 here's what i have set so far, maybe someone can help?? in etc/rc.conf i've added... ifconfig_ep0="inet xxx.xxx.xxx.67" netmask="255.255.255.240" defaultrouter="xxx.xxx.xxx.65" device ep0 isn't in /dev and i've tried to add it with /dev/MAKEDEV ep0 but it says device not present ifconfig -a gives me... ep0: flags=8843 mtu 1500 inet xxx.xxx.xxx.67 netmask 0xfffffff0 broadcast xxx.xxx.xxx.79 inet6 fe80::260:8f:fe20:1cca%ep0 prefixlen 64 scopeid 0x1 ehter 00:60:08:20:1c:ca media: Ethernet 10baseT/UTP netstat -rn gives me... 127.0.0.1 127.0.0.1 UH 0 0 lo0 xxx.xxx.xxx.64/28 link#1 UC 1 0 ep0 Internet6 has these lines... fe80::%ep0/64 link#1 UC ep0 ff02::%ep0/32 link#1 UC ep0 dmesg has... ep0: <3com 3c509-combo etherlink III at port 0x210 irq 11 on isa0 ep0: ; Fri, 28 Dec 2001 13:04:55 -0800 (PST) Received: from stlmail.dra.com (stlmail.dra.com [192.65.218.119]) by mail.dra.com (8.9.1/8.9.1) with ESMTP id PAA02239 for ; Fri, 28 Dec 2001 15:04:55 -0600 (CST) Received: by stlmail.dra.com with Internet Mail Service (5.5.2653.19) id ; Fri, 28 Dec 2001 15:04:51 -0600 Message-ID: From: Eric Six To: FreeBSD Questions Subject: Tripwire policy for bsd... Date: Fri, 28 Dec 2001 15:04:50 -0600 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does anyone have a good copy of the policy file for freebsd4.4? Or know where one is at? Running tw2.3.1.. Cheers, Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13: 6:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-230.quicksilver.net.nz [202.89.142.230]) by hub.freebsd.org (Postfix) with ESMTP id D642137B417 for ; Fri, 28 Dec 2001 13:06:28 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBSL8GA24767; Sat, 29 Dec 2001 10:08:16 +1300 (NZDT) (envelope-from jonc) Date: Sat, 29 Dec 2001 10:08:14 +1300 From: Jonathan Chen To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: avoid ping Message-ID: <20011229100814.A24652@grimoire.chen.org.nz> References: <20011221010222.R374-100000@catalyst.sasknow.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from barbish@a1poweruser.com on Fri, Dec 28, 2001 at 01:10:21PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 01:10:21PM -0500, Joe & Fhe Barbish wrote: > You responded > ipfw add 400 deny icmp from any to ${you} icmptype 8 > Where ${you} is the public IP address of your machine, or network > address of your subnet. > > I respond. > ${you} is the static IP address issued by your ISP. How do I get > this value if my ISP does dynamic IP assignments? You could write it like this: ipfw add 400 deny icmp from any to me icmptype 8 via ${IF} where ${IF} is the interface involved (eg: xl0, fxp0, etc). Cheers. -- Jonathan Chen ---------------------------------------------------------------------- If you're right 90% of the time, why quibble about the remaining 3%? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13: 8:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.earlham.edu (cs.earlham.edu [159.28.230.3]) by hub.freebsd.org (Postfix) with ESMTP id 8913237B41C for ; Fri, 28 Dec 2001 13:08:26 -0800 (PST) Received: from quark.cs.earlham.edu (quark.cs.earlham.edu [159.28.230.3]) by cs.earlham.edu (8.12.1/8.11.1) with ESMTP id fBSL7Xd8052275 for ; Fri, 28 Dec 2001 16:07:33 -0500 (EST) (envelope-from hassan@cs.earlham.edu) Date: Fri, 28 Dec 2001 16:07:33 -0500 (EST) From: Hassan Halta To: Subject: postgres support for PHP under FreeBSD Message-ID: <20011228160658.L52164-100000@quark.cs.earlham.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I hope this is the correct list to send this messge to. It seems that there is a bug in PHP 4 under FreeBSD supporting Postgres calls. However, it's compiled just fine, but when you run the code, you get the message for undefined functions. However, if you run the code under a linux box, the code runs just fine. I noticed this in FreeBSD 4.2 and 4.3 as well. Any help will be appreciated. Thanks, Hassan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:15:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.retemail.es (smtp05.iddeo.es [62.81.186.15]) by hub.freebsd.org (Postfix) with ESMTP id 989E537B417 for ; Fri, 28 Dec 2001 13:15:52 -0800 (PST) Received: from conway.localdomain ([62.174.72.236]) by smtp05.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id <20011228211552.WFMY25555.smtp05.retemail.es@conway.localdomain> for ; Fri, 28 Dec 2001 22:15:52 +0100 Date: Fri, 28 Dec 2001 22:14:40 +0100 From: F.Xavier Noria To: freebsd-questions@freebsd.org Subject: Re: Compiling Galeon Message-Id: <20011228221440.022f9acb.fxn@retemail.es> In-Reply-To: <20011228145333.O80509-100000@cyclops.ehsrealtime.com> References: <20011228145333.O80509-100000@cyclops.ehsrealtime.com> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 15:50:18 +0000 (GMT) Byron Schlemmer wrote: : Has anybody else had problems compiling Galeon on 4.4-Stable lately? Just for feedback, I did a fresh install of FreeBSD 4.4 today at work. After cvsuping the ports tree and actualizing already installed ports galeon compiled without problem. -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:16:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-230.quicksilver.net.nz [202.89.142.230]) by hub.freebsd.org (Postfix) with ESMTP id 6CD0337B419 for ; Fri, 28 Dec 2001 13:16:05 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBSLHiZ24813; Sat, 29 Dec 2001 10:17:44 +1300 (NZDT) (envelope-from jonc) Date: Sat, 29 Dec 2001 10:17:43 +1300 From: Jonathan Chen To: Brian Hourigan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: su question/concern Message-ID: <20011229101743.B24652@grimoire.chen.org.nz> References: <20011228182837.T34176-100000@brazil.webair.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228182837.T34176-100000@brazil.webair.com>; from brianh@webair.com on Fri, Dec 28, 2001 at 06:33:55PM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:33:55PM +0000, Brian Hourigan wrote: > Good afternoon, > > I have found some behavior of 'su' to be questionable. > > Since it was out of my scroll buffer, I've typed my terminal session: > > %/usr/bin/su > Can't load /usr/lib/libutil-3.so > %/usr/bin/su > Can't load /usr/lib/libutil-3.so > %/usr/bin/su > Can't make pipe. > %/usr/bin/su > Can't make pipe. > %/usr/bin/su > You have mail. > orion# Check your system for a possible compromise. 'su' has a dependacy on /usr/lib/libutil.so.3, and not /usr/lib/libutil-3.so. Check the timestamp on "/usr/bin/su". I'd suggest a cvsup-rebuild as well. -- Jonathan Chen ---------------------------------------------------------------------- When you don't know what you are doing, do it neatly. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:18:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-230.quicksilver.net.nz [202.89.142.230]) by hub.freebsd.org (Postfix) with ESMTP id B7B7937B419 for ; Fri, 28 Dec 2001 13:18:09 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBSLJrN24848; Sat, 29 Dec 2001 10:19:53 +1300 (NZDT) (envelope-from jonc) Date: Sat, 29 Dec 2001 10:19:51 +1300 From: Jonathan Chen To: Hassan Halta Cc: freebsd-questions@FreeBSD.ORG Subject: Re: postgres support for PHP under FreeBSD Message-ID: <20011229101951.C24652@grimoire.chen.org.nz> References: <20011228160658.L52164-100000@quark.cs.earlham.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228160658.L52164-100000@quark.cs.earlham.edu>; from hassan@cs.earlham.edu on Fri, Dec 28, 2001 at 04:07:33PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 04:07:33PM -0500, Hassan Halta wrote: > Hi all, > > I hope this is the correct list to send this messge to. > > It seems that there is a bug in PHP 4 under FreeBSD supporting Postgres > calls. However, it's compiled just fine, but when you run the code, you > get the message for undefined functions. However, if you run the code > under a linux box, the code runs just fine. I noticed this in FreeBSD 4.2 > and 4.3 as well. Works fine for me. Did you build it using the ports system? -- Jonathan Chen ---------------------------------------------------------------------- The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:22:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from root.com (root.com [209.102.106.178]) by hub.freebsd.org (Postfix) with ESMTP id 7BFD837B425 for ; Fri, 28 Dec 2001 13:22:12 -0800 (PST) Received: (from dg@localhost) by root.com (8.11.2/8.11.2) id fBSLCZH44907; Fri, 28 Dec 2001 13:12:35 -0800 (PST) (envelope-from dg) Date: Fri, 28 Dec 2001 13:12:35 -0800 From: David Greenman To: Nick Barnes Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD for home security cameras? Message-ID: <20011228131235.B44808@nexus.root.com> References: <70661.1009571206@thrush.ravenbrook.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <70661.1009571206@thrush.ravenbrook.com>; from Nick.Barnes@pobox.com on Fri, Dec 28, 2001 at 08:26:46PM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >My house was burgled just before Christmas. Next time this happens, >it would be satisfying to present the police with pictures of the >villains in the act of carting off our TV in our wheelbarrow, or >ransacking our CD collection. I'm thinking a few cheapo cameras, >inside and out, hooked up to a server in an inaccessible spot >(e.g. the attic) or off-site, after I get a cable modem. I would >prefer FreeBSD on the server. What's the economic way of building a >system like this? You know, I've been thinking about doing something very similar. I haven't really looked into this much yet, but it seems like one could use a video capture card like the Hauppauge WinTV along with the ports/graphics/fxtv software. It looks like fxtv could use some modifications, however, such as a way to reduce the framerate, to make it more suitable for surveillance applications. I'm not sure how well this would work with multiple WinTV cards and cameras, nor do I know how much disk space this is going to eat...but even having the last few hours of video would be useful. -DG David Greenman Co-founder, The FreeBSD Project - http://www.freebsd.org President, TeraSolutions, Inc. - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:25:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 6784737B417 for ; Fri, 28 Dec 2001 13:25:36 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id NAA26338; Fri, 28 Dec 2001 13:25:33 -0800 Message-ID: <3C2CE34D.2010505@owt.com> Date: Fri, 28 Dec 2001 13:25:33 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: David Greenman Cc: Nick Barnes , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD for home security cameras? References: <70661.1009571206@thrush.ravenbrook.com> <20011228131235.B44808@nexus.root.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG David Greenman wrote: >>My house was burgled just before Christmas. Next time this happens, >>it would be satisfying to present the police with pictures of the >>villains in the act of carting off our TV in our wheelbarrow, or >>ransacking our CD collection. I'm thinking a few cheapo cameras, >>inside and out, hooked up to a server in an inaccessible spot >>(e.g. the attic) or off-site, after I get a cable modem. I would >>prefer FreeBSD on the server. What's the economic way of building a >>system like this? >> > > You know, I've been thinking about doing something very similar. I haven't > really looked into this much yet, but it seems like one could use a video > capture card like the Hauppauge WinTV along with the ports/graphics/fxtv > software. It looks like fxtv could use some modifications, however, such as > a way to reduce the framerate, to make it more suitable for surveillance > applications. I'm not sure how well this would work with multiple WinTV cards > and cameras, nor do I know how much disk space this is going to eat...but > even having the last few hours of video would be useful. Half of the time when I browse somewhere this little X-10 cam pops up. I thought it looked pretty interesting for just that purpose. Kent -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:27:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cs.earlham.edu (cs.earlham.edu [159.28.230.3]) by hub.freebsd.org (Postfix) with ESMTP id BD18137B41F for ; Fri, 28 Dec 2001 13:27:27 -0800 (PST) Received: from quark.cs.earlham.edu (quark.cs.earlham.edu [159.28.230.3]) by cs.earlham.edu (8.12.1/8.11.1) with ESMTP id fBSLQXd8052766; Fri, 28 Dec 2001 16:26:33 -0500 (EST) (envelope-from hassan@cs.earlham.edu) Date: Fri, 28 Dec 2001 16:26:33 -0500 (EST) From: Hassan Halta To: Jonathan Chen Cc: Subject: Re: postgres support for PHP under FreeBSD In-Reply-To: <20011229101951.C24652@grimoire.chen.org.nz> Message-ID: <20011228162605.U52755-100000@quark.cs.earlham.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yes indeed, do you think building it without the port selections will help? I will try that out. Thanks, Hassan On Sat, 29 Dec 2001, Jonathan Chen wrote: > Date: Sat, 29 Dec 2001 10:19:51 +1300 > From: Jonathan Chen > To: Hassan Halta > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: postgres support for PHP under FreeBSD > > On Fri, Dec 28, 2001 at 04:07:33PM -0500, Hassan Halta wrote: > > Hi all, > > > > I hope this is the correct list to send this messge to. > > > > It seems that there is a bug in PHP 4 under FreeBSD supporting Postgres > > calls. However, it's compiled just fine, but when you run the code, you > > get the message for undefined functions. However, if you run the code > > under a linux box, the code runs just fine. I noticed this in FreeBSD 4.2 > > and 4.3 as well. > > Works fine for me. Did you build it using the ports system? > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:29: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from idscc05.onewest.net (idscc16.onewest.net [199.104.81.31]) by hub.freebsd.org (Postfix) with ESMTP id 329BC37B41B for ; Fri, 28 Dec 2001 13:28:57 -0800 (PST) Received: from terry (du212.idfl-223.onewest.net [12.7.223.212] (may be forged)) by idscc05.onewest.net (8.11.2/8.11.2) with SMTP id fBSLOfT16633 for ; Fri, 28 Dec 2001 14:24:41 -0700 Message-ID: <00d601c18fed$658c5000$0400a8c0@terry> From: "Terry Thomas" To: References: <00ab01c18fea$07c736e0$0400a8c0@terry> Subject: Re: 3c509 nic, kernel, resulting confusion??? Date: Fri, 28 Dec 2001 14:17:10 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Correction: It will ping 127.0.0.1 with a 7% loss but ping takes a long time to start, pings to outside or my router come back 'send to: host is down' ----- Original Message ----- From: "printery-blkft" To: Sent: Friday, December 28, 2001 1:53 PM Subject: 3c509 nic, kernel, resulting confusion??? > I'm running 4.4 stable with a 3c509c nic, i've csvuped and went thru > buildworld, etc. with no errors and i've been trying to get it set up for > over a week now and i've not been successful. > I have a 56k frame with 16 ip#'s and a rh box connected to a cisco router > that's up and i'm trying to get my fbsd box hooked via the switch to it too > but it won't even ping 127.0.0.1 > here's what i have set so far, maybe someone can help?? > > in etc/rc.conf i've added... > ifconfig_ep0="inet xxx.xxx.xxx.67" netmask="255.255.255.240" > defaultrouter="xxx.xxx.xxx.65" > > device ep0 isn't in /dev and i've tried to add it with > /dev/MAKEDEV ep0 > but it says device not present > > ifconfig -a gives me... > ep0: flags=8843 mtu 1500 > inet xxx.xxx.xxx.67 netmask 0xfffffff0 broadcast xxx.xxx.xxx.79 > inet6 fe80::260:8f:fe20:1cca%ep0 prefixlen 64 scopeid 0x1 > ehter 00:60:08:20:1c:ca > media: Ethernet 10baseT/UTP > > netstat -rn gives me... > 127.0.0.1 127.0.0.1 UH 0 0 lo0 > xxx.xxx.xxx.64/28 link#1 UC 1 0 ep0 > Internet6 has these lines... > fe80::%ep0/64 link#1 UC ep0 > ff02::%ep0/32 link#1 UC ep0 > > dmesg has... > ep0: <3com 3c509-combo etherlink III at port 0x210 irq 11 on isa0 > ep0: > etc/resolv.conf is... > 127.0.0.1 localhost.xxxxx.com localhost > xxx.xxx.xxx.67 ns2.xxxxx.com ns2 > xxx.xxx.xxx.67 ns2.xxxxx.com. > > etc/hosts is... > domain xxxxx.com > nameserver xxx.xxx.xxx.66 (my redhat dns) > nameserver xxx.xxx.xx.3 (my isp nameserver) > > > What am I doing wrong??? or What am I missing? > Needless to say, I'm new at this! I was able to setup ppp with no problem > but this ethernet/nic thing has me stumped! > > Thank You, > Terry Thomas > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:29:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id 9EF0C37B41A for ; Fri, 28 Dec 2001 13:29:23 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 44ED9BD47; Fri, 28 Dec 2001 13:29:23 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id NAA13779; Fri, 28 Dec 2001 13:29:22 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBSLV1O00395; Fri, 28 Dec 2001 13:31:01 -0800 (PST) (envelope-from swear@blarg.net) To: "Doug Reynolds" Cc: "freebsd-questions@freebsd.org" , "Robert D. Hughes" Subject: Re: have i make the buildworld for any changes in the kernel source files? References: <20011228182346.49FF537B420@hub.freebsd.org> From: swear@blarg.net (Gary W. Swearingen) Date: 28 Dec 2001 13:31:01 -0800 In-Reply-To: <20011228182346.49FF537B420@hub.freebsd.org> Message-ID: Lines: 18 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "Doug Reynolds" writes: > >have i to make buildworld for every change in the > >kernel source files? > >thanx > > no. you just have to make kernel KERNCONF=YOURKERNELCONFIGFILE & > reboot Except that you have to do "make buildworld" SOMETIME before doing the "make kernel". (Or I think you can build the kernel the old fashioned way with "config", etc.) I don't know the reason that "make kernel" doesn't work (or shouldn't be done anyway) if you haven't done "make buildworld" or what changes would require you to redo "make buildworld" before a "make kernel" (non-kernel src changes, I suppose), but I've seen the requirement mentioned many places. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:35: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from brazil.webair.com (brazil.webair.com [216.130.191.2]) by hub.freebsd.org (Postfix) with ESMTP id AC24E37B405 for ; Fri, 28 Dec 2001 13:34:55 -0800 (PST) Received: from localhost (brianh@localhost) by brazil.webair.com (8.11.6/8.9.3) with ESMTP id fBSLWWY46685; Fri, 28 Dec 2001 21:32:32 GMT (envelope-from brianh@webair.com) Date: Fri, 28 Dec 2001 21:32:32 +0000 (GMT) From: Brian Hourigan To: Jonathan Chen Cc: Subject: Re: su question/concern In-Reply-To: <20011229101743.B24652@grimoire.chen.org.nz> Message-ID: <20011228213202.Q34176-100000@brazil.webair.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jonathan, Sorry for the confusion.. I had to re-type it in, as it was out of my buffer (from memory) so its not exact. Checksum on su is the same as it was freshly built. Sincerely, ---------------------------------------- Brian Hourigan Lead Technical Support Specialist/ Programming Development Team Webair Internet Development, Inc. Fax: 516.568.0867 http://www.webair.com ---------------------------------------- On Sat, 29 Dec 2001, Jonathan Chen wrote: > On Fri, Dec 28, 2001 at 06:33:55PM +0000, Brian Hourigan wrote: > > Good afternoon, > > > > I have found some behavior of 'su' to be questionable. > > > > Since it was out of my scroll buffer, I've typed my terminal session: > > > > %/usr/bin/su > > Can't load /usr/lib/libutil-3.so > > %/usr/bin/su > > Can't load /usr/lib/libutil-3.so > > %/usr/bin/su > > Can't make pipe. > > %/usr/bin/su > > Can't make pipe. > > %/usr/bin/su > > You have mail. > > orion# > > Check your system for a possible compromise. 'su' has a dependacy on > /usr/lib/libutil.so.3, and not /usr/lib/libutil-3.so. Check the > timestamp on "/usr/bin/su". I'd suggest a cvsup-rebuild as well. > -- > Jonathan Chen > ---------------------------------------------------------------------- > When you don't know what you are doing, do it neatly. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:41:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (Postfix) with ESMTP id 7B87E37B41A for ; Fri, 28 Dec 2001 13:41:40 -0800 (PST) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id QAA16232; Fri, 28 Dec 2001 16:59:17 -0500 (EST) (envelope-from shovey@buffnet.net) Date: Fri, 28 Dec 2001 16:41:28 -0500 (EST) From: Stephen Hovey To: FreeBSD user Cc: Joe & Fhe Barbish , OutBack Dingo , FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: <20011228131453.C27722-100000@Amber.XtremeDev.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I dunno that I can do that with cisco routers. On Fri, 28 Dec 2001, FreeBSD user wrote: > So set it up as a transparent proxy. Port forward all outbound connects to > port 80 to your local proxy port. > > On Fri, 28 Dec 2001, Stephen Hovey wrote: > > > but then that requires gettin all the users to set up for proxy usage. > > > > On Thu, 27 Dec 2001, Joe & Fhe Barbish wrote: > > > > > So you don't reinvent the wheel, install the Junkbuster http proxy server > > > port. It allows you to filter out files by address and regular expressions. > > > See if it has some kind of database all ready populated, then all you have > > > to do is get a ip address deny list from some other package maybe for > > > windows and convert it to Junkbuster format. Junkbuster or some other http > > > proxy server is the place to start. Do the research and post your results. > > > Mayby junkbuster has a development that you can join or suggest changes to. > > > > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of OutBack Dingo > > > Sent: Thursday, December 27, 2001 4:10 PM > > > To: Stephen Hovey > > > Cc: Simon Siemonsma; Anthony Atkielski; freebsd-questions@FreeBSD.ORG > > > Subject: Re: Block WWW advertizing banners & auto spawn web pages > > > usingipfilt er or ipfw > > > > > > Well its a task I think id like to host/take on, now who wants to join > > > in supporting/coding it ?? > > > > > > On Thu, 2001-12-27 at 15:06, Stephen Hovey wrote: > > > > Someone should start a popup:ip:advert DNS site like the email blackhole > > > > list! > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:45:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id 9B87B37B41E for ; Fri, 28 Dec 2001 13:45:40 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 48E1BBD58; Fri, 28 Dec 2001 13:45:40 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id NAA17644; Fri, 28 Dec 2001 13:45:39 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBSLlJ900403; Fri, 28 Dec 2001 13:47:19 -0800 (PST) (envelope-from swear@blarg.net) To: Johann Sharizan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Software Recommendations References: <20011228161828.04659da7.johann@broadpark.no> From: swear@blarg.net (Gary W. Swearingen) Date: 28 Dec 2001 13:47:19 -0800 In-Reply-To: <20011228161828.04659da7.johann@broadpark.no> Message-ID: Lines: 16 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Johann Sharizan writes: > Are there any websites or something similar out there, listing the most popular software for a task, recommended by experienced gurus? > > This is my 2nd try posting this question, I hope it made more sense. It seems a resonably question, if poorly formatted. (Limit your lines to about 70 characters, please. This ain't HTML.) The only site I can think of is freshmeat.net which attempts to give software ratings (probably unreliable) and allows people to add comments (probably few or none). If you have several candidates for a particular task, count their mentions with http://groups.google.com/advanced_group_search to find their relative popularity (or bugginess?). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:52:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id A35EA37B41E for ; Fri, 28 Dec 2001 13:52:30 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 5B7E7BD54; Fri, 28 Dec 2001 13:52:30 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id NAA19371; Fri, 28 Dec 2001 13:52:30 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBSLs9800411; Fri, 28 Dec 2001 13:54:09 -0800 (PST) (envelope-from swear@blarg.net) To: Pat Barron Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Why can't I get 800x600 resolution on my laptop display on 4.4-R? References: From: swear@blarg.net (Gary W. Swearingen) Date: 28 Dec 2001 13:54:09 -0800 In-Reply-To: Message-ID: <9vsn9vvwn2.n9v@localhost.localdomain> Lines: 7 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Pat Barron writes: > Any advice would be welcome. You might have better luck on comp.windows.x (if M$ hasn't expropriated it). Or maybe http://www.linux-laptop.net which deals with a lot of X11 issues. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:54: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id 55A4137B41B for ; Fri, 28 Dec 2001 13:54:02 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP id WAA12249 (8.8.8/1.13); Fri, 28 Dec 2001 22:53:57 +0100 (MET) Message-Id: <200112282153.WAA12249@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: Subject: Re: Disabling KLDs Date: Fri, 28 Dec 2001 22:58:55 +0000 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Have a look at kernel securitylevels. Simon Siemonsma On Friday 28 December 2001 20:31, you wrote: > Greetings, > > In the 3.x days you could specify an "options" statement to disable > kernel LKM functionality. I have looked in the kernel LINT, and the man > pages / handbook, and see no equivalent for disabling KLDs. > > Is there any "clean" way to do this, or do I need to go through the source > tree and start cutting? > > Please reply directly, as I am not subscribed to "questions". > > Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 13:56:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 6531837B41F for ; Fri, 28 Dec 2001 13:56:28 -0800 (PST) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 4DAB5B7; Fri, 28 Dec 2001 12:56:22 -0900 (AKST) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: "Scott Robbins" Subject: Re: decopserver Date: Fri, 28 Dec 2001 12:56:21 -0900 X-Mailer: KMail [version 1.3] References: <20011228083539.4F63EB3@nebula.anchoragerescue.org> <011501c18fb3$23b02970$3008a8c0@starlowin2k> In-Reply-To: <011501c18fb3$23b02970$3008a8c0@starlowin2k> Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011228215622.4DAB5B7@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday 28 December 2001 06:20 am, Scott Robbins wrote: > ----- Original Message ----- > From: "Beech Rintoul" > To: ; > Sent: Friday, December 28, 2001 3:35 AM > Subject: re: decopserver > > > If you are using kdelibs-2.2.2 you don't have to patch, it's already been > > committed. I would suggest upgrading to the latest kde2 port. If you > > really > > > want to patch kdelibs-2.2.1 email me and I'll show you how to apply the > > patch. > > (Scott raises his hand) I would like to know for my own knowledge--I too > tried to apply the patch, but couldn't figure out which file. > I use blackbox as my window manager, but at present, find that Konqueror > suits my needs as GUI web browser. Therefore, I'd be grateful if you could > explain how to apply the patch--it might even be worth cc'ing questions as > this question has come up a few times in the past. > Thanks for your time > Sincerely, > Scott Robbins > > > Beech > > OK, to apply the KDE-ICE.diff: First do a pkg_delete -f kdelibs-2.2.1 to uninstall. cd /usr/ports/x11/kdelibs2 type make As soon as it starts into configure hit control c cd into the directory that contains the .diff cp KDE-ICE.diff /usr/ports/x11/kdelibs2/work/kdelibs-2.2.1/dcop/KDE-ICE/KDE-ICE.diff cd /usr/ports/x11/kdelibs2/work/kdelibs-2.2.1/dcop/KDE-ICE patch ; Fri, 28 Dec 2001 13:59:25 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id 3F594BD54; Fri, 28 Dec 2001 13:59:25 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id NAA21011; Fri, 28 Dec 2001 13:59:24 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id fBSM14j00417; Fri, 28 Dec 2001 14:01:04 -0800 (PST) (envelope-from swear@blarg.net) To: Julio Merino Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Program to "guess" phone number? References: <20011228203504.F728@klamath.local> From: swear@blarg.net (Gary W. Swearingen) Date: 28 Dec 2001 14:01:04 -0800 In-Reply-To: <20011228203504.F728@klamath.local> Message-ID: Lines: 15 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Julio Merino writes: > Hi all > > Is it there any program that will answer the phone or hang it (with the > modem, of course) only if the call comes from a _specific_ phone number? > Can the number be determined? I seem to recall reading within the last week of some software for FreeBSD which I understood to do anything any fancy phone system can do. Might have been closed-source. Sorry I don't remember details, but I read -stable, -questions, -chat, -doc, slashdot, & daemonnews. Might be worth googling. Of course, caller ID requires a phone account with support for that. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14: 1:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 1078C37B41F; Fri, 28 Dec 2001 14:01:20 -0800 (PST) Received: from colt.ncptiddische.net (ppp-280.wobline.de [212.68.71.1]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBSLm1802892; Fri, 28 Dec 2001 22:48:01 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBSLm5X81694; Fri, 28 Dec 2001 22:48:05 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBSLlwn03935; Fri, 28 Dec 2001 22:47:58 +0100 (CET) (envelope-from nils) Date: Fri, 28 Dec 2001 22:47:58 +0100 From: Nils Holland To: Glenn Johnson Cc: Greg Lehey , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228224758.B3860@tisys.org> References: <20011228181009.F95692@monorchid.lemis.com> <20011228204612.GA1226@gforce.johnson.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228204612.GA1226@gforce.johnson.home>; from glennpj@charter.net on Fri, Dec 28, 2001 at 02:46:12PM -0600 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 10:30PM up 8:01, 1 user, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 02:46:12PM -0600, Glenn Johnson stood up and spoke: > As far as I can tell though if I set the memory clock to > 100MHz the problem goes away completely, or at least I have not observed > it happen yet. So it's PC133 RAM but only works properly at 100 Mhz? Well, I guess I have seen the same problem: I once had a system with a front side bus of 100 Mhz, and I could set the RAM clock to either "host clock" or "host click + 33 Mhz". Now, I choose the second method, because according to my calculation, a host clock of 100 Mhz plus an additional 33 Mhz are 133 Mhz, and thus just what my PC133 RAM wants. However, the system would run less than reliable with this setting, so I later set the RAM clock to "host clock", so 100 Mhz. I no longer own that system - I had these problems back in June... Anyway, for most memory problems, I have found the tool "memtest86" (http://www.memtest86.com) to be a good test. While, as far as I have heard, this utility does not detect *all* possible errors, it has often been able to give me good insight of the stability of my RAM and overall system. Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14: 3:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom00.kundenserver.de (moutvdom00.kundenserver.de [195.20.224.149]) by hub.freebsd.org (Postfix) with ESMTP id 1D83137B41E; Fri, 28 Dec 2001 14:03:23 -0800 (PST) Received: from [195.20.224.220] (helo=mrvdom04.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16K562-0002Z4-00; Fri, 28 Dec 2001 23:03:22 +0100 Received: from pd90172bf.dip.t-dialin.net ([217.1.114.191]) by mrvdom04.kundenserver.de with esmtp (Exim 2.12 #2) id 16K561-0000tj-00; Fri, 28 Dec 2001 23:03:21 +0100 Date: Fri, 28 Dec 2001 22:02:49 +0000 (GMT) From: "P. U. (Uli) Kruppa" X-X-Sender: To: "freebsd-questions@FreeBSD.ORG" Cc: Subject: buildworld fails on -stable Message-ID: <20011228215940.O180-100000@big> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, today I cvsup'ed three times. The latest result of # make buildworld was -------------------------------------------------------------- >>> Rebuilding the temporary build tree -------------------------------------------------------------- rm -rf /usr/obj/usr/src/i386 mkdir -p /usr/obj/usr/src/i386/usr/bin mkdir -p /usr/obj/usr/src/i386/usr/lib/compat/aout mkdir -p /usr/obj/usr/src/i386/usr/games mkdir -p /usr/obj/usr/src/i386/usr/libdata/ldscripts mkdir -p /usr/obj/usr/src/i386/usr/libexec/elf mkdir -p /usr/obj/usr/src/i386/usr/sbin mkdir -p /usr/obj/usr/src/i386/usr/share/misc mkdir -p /usr/obj/usr/src/i386/usr/share/dict mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75-12 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devascii mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devcp1047 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devdvi mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devhtml mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devkoi8-r mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlatin1 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlbp mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlj4 mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devps mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devutf8 mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mdoc mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mm mkdir -p /usr/obj/usr/src/i386/usr/include/arpa mkdir -p /usr/obj/usr/src/i386/usr/include/g++/std mkdir -p /usr/obj/usr/src/i386/usr/include/isc mkdir -p /usr/obj/usr/src/i386/usr/include/objc mkdir -p /usr/obj/usr/src/i386/usr/include/protocols mkdir -p /usr/obj/usr/src/i386/usr/include/readline mkdir -p /usr/obj/usr/src/i386/usr/include/rpc mkdir -p /usr/obj/usr/src/i386/usr/include/rpcsvc mkdir -p /usr/obj/usr/src/i386/usr/include/openssl mkdir -p /usr/obj/usr/src/i386/usr/include/security mkdir -p /usr/obj/usr/src/i386/usr/include/ss ln -sf /usr/src/sys /usr/obj/usr/src/i386 -------------------------------------------------------------- >>> stage 1: bootstrap tools -------------------------------------------------------------- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386 DESTDIR=/usr/obj/usr/src/i386 INSTALL="sh /usr/src/tools/install.sh" MACHINE_ARCH=i386 TOOLS_PREFIX=/usr/obj/usr/src/i386 PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make -f Makefile.inc1 -DBOOTSTRAPPING -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED bootstrap-tools cd /usr/src/games/fortune/strfile; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/games/fortune/strfile created for /usr/src/games/fortune/strfile rm -f .depend mkdep -f .depend -a /usr/src/games/fortune/strfile/strfile.c cd /usr/src/games/fortune/strfile; make _EXTRADEPEND echo strfile: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -Wall -c /usr/src/games/fortune/strfile/strfile.c cc -O -pipe -Wall -static -o strfile strfile.o sh /usr/src/tools/install.sh -c -s -o root -g games -m 555 strfile /usr/obj/usr/src/i386/usr/games cd /usr/src/usr.bin/yacc; make obj; make depend; make all; make install /usr/obj/usr/src/i386/usr/src/usr.bin/yacc created for /usr/src/usr.bin/yacc rm -f .depend mkdep -f .depend -a /usr/src/usr.bin/yacc/closure.c /usr/src/usr.bin/yacc/error.c /usr/src/usr.bin/yacc/lalr.c /usr/src/usr.bin/yacc/lr0.c /usr/src/usr.bin/yacc/main.c /usr/src/usr.bin/yacc/mkpar.c /usr/src/usr.bin/yacc/output.c /usr/src/usr.bin/yacc/reader.c /usr/src/usr.bin/yacc/skeleton.c /usr/src/usr.bin/yacc/symtab.c /usr/src/usr.bin/yacc/verbose.c /usr/src/usr.bin/yacc/warshall.c cd /usr/src/usr.bin/yacc; make _EXTRADEPEND echo yacc: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend cc -O -pipe -c /usr/src/usr.bin/yacc/closure.c cc -O -pipe -c /usr/src/usr.bin/yacc/error.c cc -O -pipe -c /usr/src/usr.bin/yacc/lalr.c cc -O -pipe -c /usr/src/usr.bin/yacc/lr0.c cc -O -pipe -c /usr/src/usr.bin/yacc/main.c cc -O -pipe -c /usr/src/usr.bin/yacc/mkpar.c cc -O -pipe -c /usr/src/usr.bin/yacc/output.c *** Error code 1 Stop in /usr/src/usr.bin/yacc. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas? Thanks and regards, Uli. ************************************ * P. U. Kruppa - Wuppertal * * Germany * * www.pukruppa.de www.2000d.de * ************************************ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14: 5:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 7942F37B423 for ; Fri, 28 Dec 2001 14:05:49 -0800 (PST) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id fBSM5Zt10543; Fri, 28 Dec 2001 16:05:35 -0600 (CST) (envelope-from nick@rogness.net) Date: Fri, 28 Dec 2001 16:05:35 -0600 (CST) From: Nick Rogness X-Sender: nick@cody.jharris.com To: Stephen Hovey Cc: FreeBSD user , Joe & Fhe Barbish , OutBack Dingo , FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001, Stephen Hovey wrote: > > I dunno that I can do that with cisco routers. If the proxy you decide to use is wccp enabled you can interface it with a cisco router. Look up ip wccp on CCO. I believe the command to enable it on an interface is something like: ip wccp web-redirect Or something similar. I had this running in conjunction with Cisco cache engines, but should work with proxies like squid. Nick Rogness - Don't mind me...I'm just sniffing your packets To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:12: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 1296437B41A; Fri, 28 Dec 2001 14:11:57 -0800 (PST) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id OAA28666; Fri, 28 Dec 2001 14:11:54 -0800 Message-ID: <3C2CEE29.8080404@owt.com> Date: Fri, 28 Dec 2001 14:11:53 -0800 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: "P. U. (Uli) Kruppa" Cc: "freebsd-questions@FreeBSD.ORG" , freebsd-stable@FreeBSD.ORG Subject: Re: buildworld fails on -stable References: <20011228215940.O180-100000@big> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG P. U. (Uli) Kruppa wrote: > Hi, > > today I cvsup'ed three times. > The latest result of > # make buildworld > was > > > > -------------------------------------------------------------- > >>>>Rebuilding the temporary build tree >>>> > -------------------------------------------------------------- > rm -rf /usr/obj/usr/src/i386 > mkdir -p /usr/obj/usr/src/i386/usr/bin > mkdir -p /usr/obj/usr/src/i386/usr/lib/compat/aout > mkdir -p /usr/obj/usr/src/i386/usr/games > mkdir -p /usr/obj/usr/src/i386/usr/libdata/ldscripts > mkdir -p /usr/obj/usr/src/i386/usr/libexec/elf > mkdir -p /usr/obj/usr/src/i386/usr/sbin > mkdir -p /usr/obj/usr/src/i386/usr/share/misc > mkdir -p /usr/obj/usr/src/i386/usr/share/dict > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100-12 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75-12 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devascii > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devcp1047 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devdvi > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devhtml > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devkoi8-r > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlatin1 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlbp > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlj4 > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devps > mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devutf8 > mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mdoc > mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mm > mkdir -p /usr/obj/usr/src/i386/usr/include/arpa > mkdir -p /usr/obj/usr/src/i386/usr/include/g++/std > mkdir -p /usr/obj/usr/src/i386/usr/include/isc > mkdir -p /usr/obj/usr/src/i386/usr/include/objc > mkdir -p /usr/obj/usr/src/i386/usr/include/protocols > mkdir -p /usr/obj/usr/src/i386/usr/include/readline > mkdir -p /usr/obj/usr/src/i386/usr/include/rpc > mkdir -p /usr/obj/usr/src/i386/usr/include/rpcsvc > mkdir -p /usr/obj/usr/src/i386/usr/include/openssl > mkdir -p /usr/obj/usr/src/i386/usr/include/security > mkdir -p /usr/obj/usr/src/i386/usr/include/ss > ln -sf /usr/src/sys /usr/obj/usr/src/i386 > > -------------------------------------------------------------- > >>>>stage 1: bootstrap tools >>>> > -------------------------------------------------------------- > cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386 DESTDIR=/usr/obj/usr/src/i386 INSTALL="sh /usr/src/tools/install.sh" MACHINE_ARCH=i386 TOOLS_PREFIX=/usr/obj/usr/src/i386 PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make -f Makefile.inc1 -DBOOTSTRAPPING -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED bootstrap-tools > cd /usr/src/games/fortune/strfile; make obj; make depend; make all; make install > /usr/obj/usr/src/i386/usr/src/games/fortune/strfile created for /usr/src/games/fortune/strfile > rm -f .depend > mkdep -f .depend -a /usr/src/games/fortune/strfile/strfile.c > cd /usr/src/games/fortune/strfile; make _EXTRADEPEND > echo strfile: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend > cc -O -pipe -Wall -c /usr/src/games/fortune/strfile/strfile.c > cc -O -pipe -Wall -static -o strfile strfile.o > sh /usr/src/tools/install.sh -c -s -o root -g games -m 555 strfile /usr/obj/usr/src/i386/usr/games > cd /usr/src/usr.bin/yacc; make obj; make depend; make all; make install > /usr/obj/usr/src/i386/usr/src/usr.bin/yacc created for /usr/src/usr.bin/yacc > rm -f .depend > mkdep -f .depend -a /usr/src/usr.bin/yacc/closure.c /usr/src/usr.bin/yacc/error.c /usr/src/usr.bin/yacc/lalr.c /usr/src/usr.bin/yacc/lr0.c /usr/src/usr.bin/yacc/main.c /usr/src/usr.bin/yacc/mkpar.c /usr/src/usr.bin/yacc/output.c /usr/src/usr.bin/yacc/reader.c /usr/src/usr.bin/yacc/skeleton.c /usr/src/usr.bin/yacc/symtab.c /usr/src/usr.bin/yacc/verbose.c /usr/src/usr.bin/yacc/warshall.c > cd /usr/src/usr.bin/yacc; make _EXTRADEPEND > echo yacc: /usr/obj/usr/src/i386/usr/lib/libc.a >> .depend > cc -O -pipe -c /usr/src/usr.bin/yacc/closure.c > cc -O -pipe -c /usr/src/usr.bin/yacc/error.c > cc -O -pipe -c /usr/src/usr.bin/yacc/lalr.c > cc -O -pipe -c /usr/src/usr.bin/yacc/lr0.c > cc -O -pipe -c /usr/src/usr.bin/yacc/main.c > cc -O -pipe -c /usr/src/usr.bin/yacc/mkpar.c > cc -O -pipe -c /usr/src/usr.bin/yacc/output.c > *** Error code 1 > > Stop in /usr/src/usr.bin/yacc. > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > > > > Any ideas? I just cvsup'ed RELENG_4 and rebuilt my system with out any problem. You have something messed up on your end. Sometimes, weird stuff like this can be caused by a system clock that is way off. If it is off, set it to the proper time and then recvsup and etc. Kent > > Thanks and regards, -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:13:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 940F437B41A for ; Fri, 28 Dec 2001 14:13:11 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Fri, 28 Dec 2001 17:15:26 -0500 From: "Joe & Fhe Barbish" To: "Jonathan Chen" Cc: "FBSD Questions" Subject: RE: avoid ping Date: Fri, 28 Dec 2001 17:13:06 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011229100814.A24652@grimoire.chen.org.nz> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks for the fast reply. Your answer helped me add rules to stop ping echo attacks. I built my rules set from the rc.firewall simple default. I still working on adding the following functions yet. Allow pings on internal net and out to internet. Allow telenet access from tun1, local net, and from outside internet. Allow ftp access from tun1, local net, and from outside internet. Would you please critique my rules file below for completeness that in general that all the common attack doors are closed? Thanks for your expert help. Joe ############ # # Define IPFW firewall rules for gateway.a1poweruser.com # # user ppp tun0 dial out to ISP with dynamic IP addresses assigned # user ppp tun1 dial in to this box with dynamic IP addresses assigned # User ppp nat not used. natd used. Private Ip address used inside # 3 winx boxes on LAN with static IP address hard coded. # protect the whole private network from loss of service attacks # ############ # Set rules command prefix # fwcmd="/sbin/ipfw" # Flush out the list before we begin. # ${fwcmd} -f flush # Set defaults # set these to your outside interface network and netmask and ip # for dynamic IP address from ISP use there range oif="tun0" onet="62.70.155.1/24" # dynamic IP address range issued by ISP omask="62.70.155.0" # mask 62.70.155.0 thru 62.70.155.255 oip="62.70.155.1/24" odns="208.206.15.11" # ISP's dns IP address # set these to your inside interface network and netmask and ip iif="xl0" # Nic card inet="10.0.10.1" # IP address of Nic card imask="10.0.10.0" # mask 10.0.10.0 thru 10.0.10.255 iip="10.0.10.1" # Don't know what these are doing ${fwcmd} add pass all from any to any via lo0 ${fwcmd} add deny all from any to 127.0.0.0/8 ${fwcmd} add deny ip from 127.0.0.0/8 to any # Stop spoofing ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif} ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif} # Stop ping echo attacks # deny echo reply (ICMP type 0), and echo request (type 8). ${fwcmd} add deny icmp from any to ${onet}:${omask} icmptype 0 in via ${oif} ${fwcmd} add deny icmp from any to ${onet}:${omask} icmptype 8 in via ${oif} # Stop RFC1918 nets on the outside interface ${fwcmd} add deny all from any to 10.0.0.0/8 via ${oif} ${fwcmd} add deny all from any to 172.16.0.0/12 via ${oif} ${fwcmd} add deny all from any to 192.168.0.0/16 via ${oif} # Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1, # DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E) # on the outside interface ${fwcmd} add deny all from any to 0.0.0.0/8 via ${oif} ${fwcmd} add deny all from any to 169.254.0.0/16 via ${oif} ${fwcmd} add deny all from any to 192.0.2.0/24 via ${oif} ${fwcmd} add deny all from any to 224.0.0.0/4 via ${oif} ${fwcmd} add deny all from any to 240.0.0.0/4 via ${oif} # Network Address Translation. This rule is placed here deliberately. # All rules above check traffic from public internet before nat does it # thing. # All the rules following the nat check the private net. ${fwcmd} add divert natd all from any to any via ${oif} # Stop RFC1918 nets on the outside interface ${fwcmd} add deny all from 10.0.0.0/8 to any via ${oif} ${fwcmd} add deny all from 172.16.0.0/12 to any via ${oif} ${fwcmd} add deny all from 192.168.0.0/16 to any via ${oif} # Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1, # DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E) # on the outside interface ${fwcmd} add deny all from 0.0.0.0/8 to any via ${oif} ${fwcmd} add deny all from 169.254.0.0/16 to any via ${oif} ${fwcmd} add deny all from 192.0.2.0/24 to any via ${oif} ${fwcmd} add deny all from 224.0.0.0/4 to any via ${oif} ${fwcmd} add deny all from 240.0.0.0/4 to any via ${oif} # Allow TCP through if setup succeeded ${fwcmd} add pass tcp from any to any established # Allow IP fragments to pass through ${fwcmd} add pass all from any to any frag # Allow setup of incoming email ${fwcmd} add pass tcp from any to ${oip} 25 setup # Allow access to our DNS ${fwcmd} add pass tcp from any to ${odns} 53 setup ${fwcmd} add pass udp from any to ${odns} 53 ${fwcmd} add pass udp from ${odns} 53 to any # Allow access to our WWW ${fwcmd} add pass tcp from any to ${oip} 80 setup # Reject&Log all setup of incoming connections from the outside ${fwcmd} add deny log tcp from any to any in via ${oif} setup # Allow setup of any other TCP connection ${fwcmd} add pass tcp from any to any setup # Allow DNS queries out in the world ${fwcmd} add pass udp from ${oip} to any 53 keep-state # Allow NTP queries out in the world ${fwcmd} add pass udp from ${oip} to any 123 keep-state # Everything else is denied by default -----Original Message----- From: Jonathan Chen [mailto:jonc@chen.org.nz] Sent: Friday, December 28, 2001 4:08 PM To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: avoid ping On Fri, Dec 28, 2001 at 01:10:21PM -0500, Joe & Fhe Barbish wrote: > You responded > ipfw add 400 deny icmp from any to ${you} icmptype 8 > Where ${you} is the public IP address of your machine, or network > address of your subnet. > > I respond. > ${you} is the static IP address issued by your ISP. How do I get > this value if my ISP does dynamic IP assignments? You could write it like this: ipfw add 400 deny icmp from any to me icmptype 8 via ${IF} where ${IF} is the interface involved (eg: xl0, fxp0, etc). Cheers. -- Jonathan Chen ---------------------------------------------------------------------- If you're right 90% of the time, why quibble about the remaining 3%? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:14:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebsd.dk (fw-rl0.freebsd.dk [212.242.86.114]) by hub.freebsd.org (Postfix) with ESMTP id 6D0B637B447; Fri, 28 Dec 2001 14:14:04 -0800 (PST) Received: (from sos@localhost) by freebsd.dk (8.11.6/8.11.6) id fBSMCea36745; Fri, 28 Dec 2001 23:12:40 +0100 (CET) (envelope-from sos) From: Søren Schmidt Message-Id: <200112282212.fBSMCea36745@freebsd.dk> Subject: Re: Does FreeBSD have a problem with some AMD processors? In-Reply-To: <20011228204612.GA1226@gforce.johnson.home> To: Glenn Johnson Date: Fri, 28 Dec 2001 23:12:40 +0100 (CET) Cc: Greg Lehey , FreeBSD Questions , FreeBSD Hackers Reply-To: sos@freebsd.dk X-Mailer: ELM [version 2.4ME+ PL94b (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=ISO-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It seems Glenn Johnson wrote: > I have had this exact problem. I have an Epox 8KTA board with a > 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would > consistently get random errors, usually during a compilation, using > the default BIOS settings. After fiddling with some of the BIOS > options, such as enabling PCI burst, the system runs pretty stable. > However, occasionally I will get that freeze that you refer to during a > buildworld. As far as I can tell though if I set the memory clock to > 100MHz the problem goes away completely, or at least I have not observed > it happen yet. I have a 8kta3+ here that has problems with some of the PC133 512Mb modules I got cheaply earlier this year, the problem was solved when I swithed of "page mode" in the BIOS, it then runs 100% stable even overclocked at 145Mhz and CAS2 which the modules shouldn't even support. > It is really hard for me to say if this is FreeBSD specific because I do > not tend to stress the system much when I have Linux running. My wife > has an identical system running Windows 98SE and she has no problems > but I know that I have installed software from Epox that specifically > addresses some issues with the VIA chipset so that may be why. From what I can tell the newest Epox BIOS for the 8kta3 does *not* install the 686b fix when it doesn't detect a SBLive! sound card, nice but not good enough :/ -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:25:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web20103.mail.yahoo.com (web20103.mail.yahoo.com [216.136.226.40]) by hub.freebsd.org (Postfix) with SMTP id 5418A37B496 for ; Fri, 28 Dec 2001 14:25:34 -0800 (PST) Message-ID: <20011228222534.46235.qmail@web20103.mail.yahoo.com> Received: from [24.100.124.207] by web20103.mail.yahoo.com via HTTP; Fri, 28 Dec 2001 14:25:34 PST Date: Fri, 28 Dec 2001 14:25:34 -0800 (PST) From: ann kok Subject: uw-imap To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all I installed uw-imap by tarball But I don't know how make it working? Thank you __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:31:50 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 34F3F37B41B; Fri, 28 Dec 2001 14:31:44 -0800 (PST) Received: from colt.ncptiddische.net (ppp-294.wobline.de [212.68.71.15]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBSMUk805099; Fri, 28 Dec 2001 23:30:46 +0100 Received: from tisys.org (poison.ncptiddische.net [192.168.0.5]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBSMUoX81871; Fri, 28 Dec 2001 23:30:51 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBSMUix04563; Fri, 28 Dec 2001 23:30:44 +0100 (CET) (envelope-from nils) Date: Fri, 28 Dec 2001 23:30:09 +0100 From: Nils Holland To: =?iso-8859-1?Q?S=F8ren_Schmidt?= Cc: Glenn Johnson , Greg Lehey , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228233009.A4519@tisys.org> References: <20011228204612.GA1226@gforce.johnson.home> <200112282212.fBSMCea36745@freebsd.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: <200112282212.fBSMCea36745@freebsd.dk>; from sos@freebsd.dk on Fri, Dec 28, 2001 at 11:12:40PM +0100 X-Operating-System: FreeBSD poison.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 11:19PM up 8:50, 1 user, load averages: 0.02, 0.09, 0.07 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 11:12:40PM +0100, Søren Schmidt stood up and spoke: > > >From what I can tell the newest Epox BIOS for the 8kta3 does *not* > install the 686b fix when it doesn't detect a SBLive! sound card, > nice but not good enough :/ There are many information on the 686B bug available on the net, and looking at all of them and trying to draw some conclusions isn't going to work, as much of the information that can be found is conflicting. Actually, I just read an article that "revisited" the 686B in August, a few months after the fix was released. They claim that they were *only* able to produce the problem with a SBLive, but not without. Other reports, and that is the most widely adopted belief, is that the bug can also occur without the SBLive. Other reports I read claim to have found similar problems in the MVP3 chipset, as used in a lot of K6-2 systems. According to these articles, "the 686B is only the latest member of a family of flawed chipsets". More or less randomly, I got about a mailing list post where multiple Linux users reported data corruption with the MVP3. But back to the 686B: I don't know what Linux is currently doing about the bug, but for some time after the problem was discovered, it seems as if they simply turned DMA off (a miling list post on this topic said: "...and now all these high-performance Athlon systems are going to run in 1992 PIO mode by default"). Well, I guess all of this may well be a little confusing ;-) Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:35: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vortex.wa4phy.net (cc449817-a.mrtnz1.ga.home.com [24.12.79.51]) by hub.freebsd.org (Postfix) with ESMTP id 8C79037B41B for ; Fri, 28 Dec 2001 14:35:01 -0800 (PST) Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1]) by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id fBSMYtO00443 for ; Fri, 28 Dec 2001 17:34:56 -0500 (EST) (envelope-from sam@wa4phy.net) Message-ID: <3C2CF38F.E721F0B2@vortex.wa4phy.net> Date: Fri, 28 Dec 2001 17:34:55 -0500 From: Sam Drinkard Organization: You Gotta Be Kiddin! X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-PRERELEASE i386) X-Accept-Language: en, ja MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: XConsole behavior Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've noticed an apparent change in the xconsole behavior since 3.4-R, under X11-3.3.6. Having looked at the app-defaults for XConsole there, all appears to be "normal". Problem is this: xconsole no longer has a scroll function (when needed), both horizontal and vertical. What am I missing? Window manager is Gnome/Sawfish, if that matters. I'm not subscribed to this list, but will check the archives.. a cc: to me would be nice! Tnx.. Sam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:38:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from citadel.simphost.com (citadel.simphost.com [216.253.163.10]) by hub.freebsd.org (Postfix) with ESMTP id 775A937B41F for ; Fri, 28 Dec 2001 14:38:09 -0800 (PST) Received: by citadel.simphost.com (Postfix, from userid 1000) id BFD4F24D14; Fri, 28 Dec 2001 17:37:00 -0500 (EST) Received: from localhost (localhost [127.0.0.1]) by citadel.simphost.com (Postfix) with ESMTP id B263720F09 for ; Fri, 28 Dec 2001 17:37:00 -0500 (EST) Date: Fri, 28 Dec 2001 17:37:00 -0500 (EST) From: "Jason L. Schwab" X-X-Sender: To: Subject: Expected Release Date Message-ID: <20011228173616.V56300-100000@citadel.simphost.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Heya Guys/Gals... What is the expected release date for 4.5-RELEASE and when do you all plan to have 4.5-STABLE rolling out? Thanks -Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:43:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp1out.rdc-nyc.rr.com (nycsmtp1out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id 6DBA137B443 for ; Fri, 28 Dec 2001 14:43:20 -0800 (PST) Received: from scott1.nyc.rr.com (24-168-25-8.nyc.rr.com [24.168.25.8]) by nycsmtp1out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id fBSMhIiD023043; Fri, 28 Dec 2001 17:43:18 -0500 (EST) Message-Id: <5.1.0.14.0.20011228174133.00c216f8@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 28 Dec 2001 17:43:11 -0500 To: Beech Rintoul , "Scott Robbins" From: Scott Subject: Re: decopserver Cc: freebsd-questions@freebsd.org, daverk@epix.net In-Reply-To: <20011228215622.4DAB5B7@nebula.anchoragerescue.org> References: <011501c18fb3$23b02970$3008a8c0@starlowin2k> <20011228083539.4F63EB3@nebula.anchoragerescue.org> <011501c18fb3$23b02970$3008a8c0@starlowin2k> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 12:56 2001/12/28 -0900, Beech Rintoul wrote: >OK, to apply the KDE-ICE.diff: > >First do a pkg_delete -f kdelibs-2.2.1 to uninstall. > >cd /usr/ports/x11/kdelibs2 > >type make > >As soon as it starts into configure hit control c > >cd into the directory that contains the .diff > >cp KDE-ICE.diff >/usr/ports/x11/kdelibs2/work/kdelibs-2.2.1/dcop/KDE-ICE/KDE-ICE.diff > >cd /usr/ports/x11/kdelibs2/work/kdelibs-2.2.1/dcop/KDE-ICE > >patch >cd /usr/ports/x11/kdelibs2 > >make > >make install > >You can find documentation in man patch and man diff. Thank you very much--I'd looked at the man pages, and still couldn't figure out which file needed patching. Actually, I did the recommended upgrade, and it has been working for me, however, I still wanted to know for my own knowledge. Again, sincere thanks Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:47:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.xs4all.nl (freebie.xs4all.nl [213.84.32.253]) by hub.freebsd.org (Postfix) with ESMTP id 283D337B420; Fri, 28 Dec 2001 14:47:13 -0800 (PST) Received: (from wkb@localhost) by freebie.xs4all.nl (8.11.6/8.11.6) id fBSMjom52536; Fri, 28 Dec 2001 23:45:50 +0100 (CET) (envelope-from wkb) Date: Fri, 28 Dec 2001 23:45:50 +0100 From: Wilko Bulte To: Glenn Johnson Cc: Greg Lehey , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228234549.B51984@freebie.xs4all.nl> References: <20011228181009.F95692@monorchid.lemis.com> <20011228204612.GA1226@gforce.johnson.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228204612.GA1226@gforce.johnson.home>; from glennpj@charter.net on Fri, Dec 28, 2001 at 02:46:12PM -0600 X-OS: FreeBSD 4.5-PRERELEASE X-PGP: finger wilko@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 02:46:12PM -0600, Glenn Johnson wrote: > On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: > > > I've been using AMD processors almost exclusively in my main work > > machines for over 4 years, and I've been very happy with them. I'm > > currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and > > an Athlon XP 1700. Last August, though, I bought a machine which gave > > me a lot of trouble, the Duron 850 mentioned above. I found that it > > would freeze for no apparent reason. I established that it wasn't the > > memory by taking the memory of another machine and running it like > > that; it made no difference. I ended up also changing the motherboard > > and the processor, but the hangs continued. I could expect a hang > > within 8 hours when doing 'make release' > > > > Just for the fun of it, I tried running Linux on it. I've been > > running a kernel build and 'make clean' on it now for 36 hours, and > > it's still running fine. Yesterday some Linux friends of mine came > > around and looked at it and told me that the Linux kernel I was > > running on the machine (2.4.16) had had a number of AMD-specific > > fixes put in. He didn't go into more detail, unfortunately, but I'll > > ask him again when I have time: it could be something relating to > > chipset bugs we have seen and fixed. It would help to know, though, > > if other people are experiencing similar problems. Please let me > > know if you're having problems with AMD processors which seem to be > > specific to FreeBSD, especially if they're hangs (i.e. the machine > > stops reacting, but the display still shows the last state, it doesn't > > reboot or panic). > > I have had this exact problem. I have an Epox 8KTA board with a > 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would > consistently get random errors, usually during a compilation, using > the default BIOS settings. After fiddling with some of the BIOS > options, such as enabling PCI burst, the system runs pretty stable. > However, occasionally I will get that freeze that you refer to during a > buildworld. As far as I can tell though if I set the memory clock to > 100MHz the problem goes away completely, or at least I have not observed > it happen yet. Another thing that struck my mind that bit me once: byte merging or write combine (I forgot the right phrase the bios setup used) was rather fatal for the stability of the machine. Wilko -- | / o / /_ _ email: wilko@FreeBSD.org |/|/ / / /( (_) Bulte Arnhem, The Netherlands To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:47:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.hccnet.nl (smtp.hccnet.nl [62.251.0.13]) by hub.freebsd.org (Postfix) with ESMTP id 62D0A37B426 for ; Fri, 28 Dec 2001 14:47:29 -0800 (PST) Received: from there by smtp.hccnet.nl via fia168-94.dsl.hccnet.nl [62.251.94.168] with SMTP for id XAA27473 (8.8.8/1.13); Fri, 28 Dec 2001 23:47:27 +0100 (MET) Message-Id: <200112282247.XAA27473@smtp.hccnet.nl> Content-Type: text/plain; charset="iso-8859-1" From: Simon Siemonsma To: freebsd-questions@freebsd.org Subject: installing aspell multi language support Date: Fri, 28 Dec 2001 23:52:25 +0000 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can anyone tell me how to install an additional language under aspell. When I do it as described in the readme files it doesn't work. I'm mainly interested in Dutch and a bit in German. Simon Siemonsma To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:51:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sinclair.swishmail.com (sinclair.swishmail.com [209.10.110.64]) by hub.freebsd.org (Postfix) with SMTP id 49C5D37B41E for ; Fri, 28 Dec 2001 14:51:43 -0800 (PST) Received: (qmail 51735 invoked from network); 28 Dec 2001 22:42:26 -0000 Received: from unknown (HELO lenny) (206.32.4.252) by sinclair.swishmail.com with SMTP; 28 Dec 2001 22:42:24 -0000 Message-ID: <000701c18ff2$36c321e0$780000d2@mesaintl.com> Reply-To: "MIS" From: "MIS" To: Subject: trouble installing webapp-module from source Date: Fri, 28 Dec 2001 17:51:33 -0500 Organization: Mesa International MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anyone succeeded in setting up Tomcat 4 on Apache 2 as a module? I downloaded webapp-module-1.0.1-tc401-src.tar.gz from the Jakarta web site but I get a permissions error while running make. It keeps telling me permission denied when it tries to do something while inside of the apache-1.3 subdirectory of the sourcetree. I have 4.4-RELEASE and Apache 2 running. Any words of wisdom? I tried using CVS to download the latest sourcetree but I get the same error message. Any words of advice? Regards, Len Huppe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:52: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 11B2937B426 for ; Fri, 28 Dec 2001 14:51:53 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Fri, 28 Dec 2001 17:54:08 -0500 From: "Joe & Fhe Barbish" To: "Kent Stewart" Cc: "FBSD Questions" Subject: RE: FreeBSD for home security cameras? Date: Fri, 28 Dec 2001 17:51:49 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <3C2CE34D.2010505@owt.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I had a 4 cameras set of those x-10's and tried to do just like you are talking about. They are engineered for hookup to vcr's and need a human operator to switch between cameras. They also have a USB control plug in unit for PC access and control, but the pc software was very very poor and had no way to sense motion and switch to camera to record action. Pc control was still human control, substitute a pc for hardware control unit. That was 15 months ago, maybe they put some development into the software by now. The nice thing was the cameras did not need cabling, they transmitted using radio waves and control was controlled over the electric house circuit the camera got it's power from. Could not put a camera where it would freeze. The picture quality was just barely acceptable. Returned equipment for refund which took 5 months. Buyer be ware -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Kent Stewart Sent: Friday, December 28, 2001 4:26 PM To: David Greenman Cc: Nick Barnes; freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD for home security cameras? David Greenman wrote: >>My house was burgled just before Christmas. Next time this happens, >>it would be satisfying to present the police with pictures of the >>villains in the act of carting off our TV in our wheelbarrow, or >>ransacking our CD collection. I'm thinking a few cheapo cameras, >>inside and out, hooked up to a server in an inaccessible spot >>(e.g. the attic) or off-site, after I get a cable modem. I would >>prefer FreeBSD on the server. What's the economic way of building a >>system like this? >> > > You know, I've been thinking about doing something very similar. I haven't > really looked into this much yet, but it seems like one could use a video > capture card like the Hauppauge WinTV along with the ports/graphics/fxtv > software. It looks like fxtv could use some modifications, however, such as > a way to reduce the framerate, to make it more suitable for surveillance > applications. I'm not sure how well this would work with multiple WinTV cards > and cameras, nor do I know how much disk space this is going to eat...but > even having the last few hours of video would be useful. Half of the time when I browse somewhere this little X-10 cam pops up. I thought it looked pretty interesting for just that purpose. Kent -- Kent Stewart Richland, WA mailto:kbstew99@hotmail.com http://users.owt.com/kstewart/index.html FreeBSD News http://daily.daemonnews.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:52:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 26FC437B41E for ; Fri, 28 Dec 2001 14:52:36 -0800 (PST) Received: from barbish ([63.70.155.113]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Fri, 28 Dec 2001 17:54:52 -0500 From: "Joe & Fhe Barbish" To: "Jason L. Schwab" Cc: "FBSD Questions" Subject: RE: Expected Release Date Date: Fri, 28 Dec 2001 17:52:33 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011228173616.V56300-100000@citadel.simphost.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 01/20/2002 -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jason L. Schwab Sent: Friday, December 28, 2001 5:37 PM To: freebsd-questions@freebsd.org Subject: Expected Release Date Heya Guys/Gals... What is the expected release date for 4.5-RELEASE and when do you all plan to have 4.5-STABLE rolling out? Thanks -Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:56:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.mrf.mail.rcn.net (smtp01.mrf.mail.rcn.net [207.172.4.60]) by hub.freebsd.org (Postfix) with ESMTP id 23BA937B405 for ; Fri, 28 Dec 2001 14:56:37 -0800 (PST) Received: from 66-44-92-204.s585.tnt7.lnhva.md.dialup.rcn.com ([66.44.92.204] helo=sten.alder.net) by smtp01.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16K5vX-00001d-00 for freebsd-questions@FreeBSD.ORG; Fri, 28 Dec 2001 17:56:36 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Fri, 28 Dec 2001 17:55:32 -0500 Date: Fri, 28 Dec 2001 17:55:32 -0500 From: "Bob Hall" To: FreeBSD Questions Subject: Re: Teaching parents UNIX Message-ID: <20011228175531.A575@starpower.net> Mail-Followup-To: FreeBSD Questions References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> <01a801c18f9c$a15050b0$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <01a801c18f9c$a15050b0$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Fri, Dec 28, 2001 at 01:39:02PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 01:39:02PM +0100, Anthony Atkielski wrote: > Bob writes: > > > There are no desktop systems that don't > > require maintenance, if they are getting > > regular use. > > I know lots of people who use PCs or Macs daily and never have to do any > maintenance at all. I know people like that also. They ignore the broken parts and live with slow, fragmented disks and up to twenty five active viruses on their systems. The systems still run, but they limp. No maintenance means no OS upgrades, no patches, no defragging, no running software to scan for or remove viruses or fix system problems, no editing the registry, no updating virus signatures (necessary to keep the system virus free), no remote maintenance via the LAN by the tech support people, no hardware upgrades, no reinstalling corrupted drivers or updating drivers, no updates to shared dlls, no service packs, no fixing resource conflicts when new software is installed, no backups, no hard drive checks, no updating or using repair tools, no updating or uninstalling apps, and no reconfiguration to accommodate the user's changing needs. Bob Hall -- Know thyself? Absurd direction! Bubbles bear no introspection. -Khushhal Khan Khatak To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 14:59:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from dc-mx04.cluster1.charter.net (dc-mx04.cluster0.hsacorp.net [209.225.8.14]) by hub.freebsd.org (Postfix) with ESMTP id 7986037B405; Fri, 28 Dec 2001 14:59:36 -0800 (PST) Received: from [24.158.214.244] (HELO gforce.johnson.home) by dc-mx04.cluster1.charter.net (CommuniGate Pro SMTP 3.4.6) with ESMTP id 794677; Fri, 28 Dec 2001 18:05:56 -0500 Received: (from glenn@localhost) by gforce.johnson.home (8.11.6/8.11.6) id fBSMxW600511; Fri, 28 Dec 2001 16:59:32 -0600 (CST) (envelope-from glenn) Date: Fri, 28 Dec 2001 16:59:31 -0600 From: Glenn Johnson To: =?iso-8859-1?Q?S=F8ren?= Schmidt Cc: Greg Lehey , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011228225931.GA448@gforce.johnson.home> Mail-Followup-To: Glenn Johnson , =?iso-8859-1?Q?S=F8ren?= Schmidt , Greg Lehey , FreeBSD Questions , FreeBSD Hackers References: <20011228204612.GA1226@gforce.johnson.home> <200112282212.fBSMCea36745@freebsd.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <200112282212.fBSMCea36745@freebsd.dk> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 11:12:40PM +0100, Søren Schmidt wrote: > It seems Glenn Johnson wrote: > > > I have had this exact problem. I have an Epox 8KTA board with a > > 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would > > consistently get random errors, usually during a compilation, using > > the default BIOS settings. After fiddling with some of the BIOS > > options, such as enabling PCI burst, the system runs pretty stable. > > However, occasionally I will get that freeze that you refer to > > during a buildworld. As far as I can tell though if I set the > > memory clock to 100MHz the problem goes away completely, or at least > > I have not observed it happen yet. > > I have a 8kta3+ here that has problems with some of the PC133 512Mb > modules I got cheaply earlier this year, the problem was solved when > I swithed of "page mode" in the BIOS, it then runs 100% stable even > overclocked at 145Mhz and CAS2 which the modules shouldn't even > support. Thanks, I will give that a try. > > It is really hard for me to say if this is FreeBSD specific because > > I do not tend to stress the system much when I have Linux running. > > My wife has an identical system running Windows 98SE and she has no > > problems but I know that I have installed software from Epox that > > specifically addresses some issues with the VIA chipset so that may > > be why. > > > From what I can tell the newest Epox BIOS for the 8kta3 does *not* > > install the 686b fix when it doesn't detect a SBLive! sound card, nice > but not good enough :/ Yes, that seems to be the case. I just checked the Epox Web site and the BIOS revision of 04/17/2001 for the 8KTA has the following bullet point: * Fixed VIA KT133/A/E + 686B issue copying large sized files on * E/IDE devices with a SB Live sound card installed. No further mention of the issue is made for later BIOS revisions. For the software I referred to above, I was referring to Windows software that includes fixes for the OS drivers. They call it VIA Apollo 4-in-1 (a.k.a. VIA ServicePack). I am not really up on Windows behavior but my impression was that this software was necessary to enable UDMA. -- Glenn Johnson glennpj@charter.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 15:29:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.mx.pitdc1.stargate.net (smtp1.mx.pitdc1.stargate.net [206.210.69.141]) by hub.freebsd.org (Postfix) with SMTP id 006D637B419 for ; Fri, 28 Dec 2001 15:29:38 -0800 (PST) Received: (qmail 13160 invoked from network); 28 Dec 2001 23:29:33 -0000 Received: from dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.196) by smtp1.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 23:29:33 -0000 Received: (qmail 68155 invoked from network); 28 Dec 2001 23:29:32 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 23:29:32 -0000 From: "Doug Reynolds" To: "Glenn Johnson" , "Nils Holland" Cc: "FreeBSD Hackers" , "FreeBSD Questions" , "Greg Lehey" Date: Fri, 28 Dec 2001 18:30:59 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011228224758.B3860@tisys.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-Id: <20011228232938.006D637B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 22:47:58 +0100, Nils Holland wrote: >On Fri, Dec 28, 2001 at 02:46:12PM -0600, Glenn Johnson stood up and spoke: >> As far as I can tell though if I set the memory clock to >> 100MHz the problem goes away completely, or at least I have not observed >> it happen yet. > >So it's PC133 RAM but only works properly at 100 Mhz? Well, I guess I have >seen the same problem: I once had a system with a front side bus of 100 >Mhz, and I could set the RAM clock to either "host clock" or "host click + >33 Mhz". Now, I choose the second method, because according to my >calculation, a host clock of 100 Mhz plus an additional 33 Mhz are 133 Mhz, >and thus just what my PC133 RAM wants. However, the system would run less >than reliable with this setting, so I later set the RAM clock to "host >clock", so 100 Mhz. I no longer own that system - I had these problems back >in June... > >Anyway, for most memory problems, I have found the tool "memtest86" >(http://www.memtest86.com) to be a good test. While, as far as I have >heard, this utility does not detect *all* possible errors, it has often >been able to give me good insight of the stability of my RAM and overall >system. I know back in the days when PC100 was new and the prices came down a little bit, but still really expensive, a few manufactures pirated a lot of PC66 and made some changes to have it work like PC100. but it wasn't stable. maybe people are doing that with pc133.. it wouldnt surprise me. --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 15:36:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.mx.pitdc1.stargate.net (smtp1.mx.pitdc1.stargate.net [206.210.69.141]) by hub.freebsd.org (Postfix) with SMTP id 1414337B41C for ; Fri, 28 Dec 2001 15:36:08 -0800 (PST) Received: (qmail 669 invoked from network); 28 Dec 2001 23:36:06 -0000 Received: from dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.135.196) by smtp1.mx.pitdc1.stargate.net with SMTP; 28 Dec 2001 23:36:06 -0000 Received: (qmail 68175 invoked from network); 28 Dec 2001 23:36:05 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-209-166-135-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net with SMTP; 28 Dec 2001 23:36:05 -0000 From: "Doug Reynolds" To: "Cliff Sarginson" , "P. U. (Uli) Kruppa" Cc: "freebsd-questions@FreeBSD.ORG" Date: Fri, 28 Dec 2001 18:37:31 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011228191429.K5419-100000@big> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Package or Ports CVSup Message-Id: <20011228233608.1414337B41C@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 19:23:59 +0000 (GMT), P. U. (Uli) Kruppa wrote: > >Remember FreeBSD is a multitasking OS: >You can still work on your computer during compilation (For >example you could type your translation of "War and Peace" >into a tex-file ... >...or you could simply go to bed and let it compile by >itself. > >Though - sometimes - I like watching all the >gcc ... -o ... > /dev/null >running across my screen :-) I like to make buildwold > ~/world.log& that way it'll log all the output, but i can sign off ssh. :) --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 15:39: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 4B91337B416 for ; Fri, 28 Dec 2001 15:38:59 -0800 (PST) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id fBSNabY08375; Fri, 28 Dec 2001 20:36:38 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Fri, 28 Dec 2001 20:36:37 -0300 (ART) From: Fernando Gleiser To: Stephen Hovey Cc: FBSD Questions Subject: RE: Block WWW advertizing banners & auto spawn web pages usingipfilt er or ipfw In-Reply-To: Message-ID: <20011228203411.F2673-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001, Stephen Hovey wrote: > > I dunno that I can do that with cisco routers. Don't top post. Top posting is bad, mmmkay? =0) You can do transparent proxying with squid and a cisco router. Read http://www.squid-cache.org/Doc/FAQ/FAQ-17.html for the details. Fer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 15:44:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id CA80837B417 for ; Fri, 28 Dec 2001 15:44:28 -0800 (PST) Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id fBSNgKY08437; Fri, 28 Dec 2001 20:42:20 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Fri, 28 Dec 2001 20:42:20 -0300 (ART) From: Fernando Gleiser To: Johann Sharizan Cc: Subject: Re: OpenSSH -- Make up your mind! In-Reply-To: <20011228163121.4df70a62.johann@broadpark.no> Message-ID: <20011228203716.N2673-100000@cactus.fi.uba.ar> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001, Johann Sharizan wrote: > Hi. > > I recently installed the newest port of OpenSSH for security reasons, > after having manually deleted all traces of the old one. > > After the installation the new config files could be found in > /usr/local/etc. SSHD, however, complained it couldn't find sshd_config in > /etc/ssh. So I went ahead and moved them all from /usr/local/etc to > /etc/ssh. But now, SSHD brings me this output, requiring a non-existent > file: > > Could not load host key: /etc/ssh/ssh_host_rsa_key Thats because you didn't tell sshd to get the key and config file from the new location and sshd tries to get them from the default location. Read sshd(8) and look at the -f and -h flags. The answer to your problem is in the man page. Fer > > OpenSSH did generate all the nessecary keys and config files upon installation; > > (16:30) [johann@ninja] [/etc/ssh] > ls > ssh_config ssh_host_dsa_key.pub ssh_host_key.pub > ssh_host_dsa_key ssh_host_key sshd_config > > So what does SSHD need an RSA key when it already has a DSA one? > > Again, I'm utterly confused. > > Regards, > Johann > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 15:51:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc52.attbi.com (rwcrmhc52.attbi.com [216.148.227.88]) by hub.freebsd.org (Postfix) with ESMTP id 38FE637B421 for ; Fri, 28 Dec 2001 15:51:11 -0800 (PST) Received: from trittico.fiddi.com ([12.228.145.237]) by rwcrmhc52.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20011228235110.QHZI6450.rwcrmhc52.attbi.com@trittico.fiddi.com>; Fri, 28 Dec 2001 23:51:10 +0000 Date: Fri, 28 Dec 2001 15:51:10 -0800 (PST) From: Dave Runkle X-X-Sender: dave@trittico.fiddi.com To: Bernie Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Easy Questions -- newcomer In-Reply-To: Message-ID: <20011228154212.N59997-100000@trittico.fiddi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > 2. How can i redirect the output of 'make' in c-shell with stdout > in one file and stderr in another? i thied this: > make >make_stdout.txt 2>make_stderr.txt > but i got messg ambigus redirection. i suspect that the above > works for bash only (or maybe not). In any case, what's the > equivalent for tcsh? Try script(1). It's installed with the base system, a utility to capture each and every character that hits your screen. You'll start it with, for instance: script /var/tmp/logs/buildworld-011228.log then go through all of your builds, and when you're done, type: exit to end the script. Now you can less /var/tmp/logs/buildworld-011228.log and view everything that happened, with full search capabilities. See 'man 1 script' for details. I think Clark answered the other questions quite nicely, so there is nothing more to add. Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16: 9:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 7B49837B420; Fri, 28 Dec 2001 16:09:43 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id B25FC786E3; Sat, 29 Dec 2001 10:39:37 +1030 (CST) Date: Sat, 29 Dec 2001 10:39:37 +1030 From: Greg Lehey To: =?iso-8859-1?Q?S=F8ren?= Schmidt Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229103937.G48518@monorchid.lemis.com> References: <20011228181009.F95692@monorchid.lemis.com> <200112281223.fBSCNo791738@freebsd.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <200112281223.fBSCNo791738@freebsd.dk> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 13:23:50 +0100, Søren Schmidt wrote: > It seems Greg Lehey wrote: >> Information that could be interesting is (here my values): >> >> Processor: AMD Duron 850 >> Motherboard: ECS K7VZA >> Memory: 1 128 MB SIMM, 100 MHz. > > What FreeBSD version are you using ? I have put a fix for the 686b > southbridge bug in -current, but it is not in -stable yet... Hmm, this is 4-STABLE. Can you point me at the fix, and I'll try it out. I notice that the Linux dmesg says: PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Applying VIA southbridge workaround. So that could be the issue. I've got a 686 Southbridge on the Athlon XP as well, but it's running -CURRENT. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:11:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id C97D637B420 for ; Fri, 28 Dec 2001 16:11:06 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 7DBD9786E3; Sat, 29 Dec 2001 10:41:00 +1030 (CST) Date: Sat, 29 Dec 2001 10:41:00 +1030 From: Greg Lehey To: Cliff Sarginson Cc: FreeBSD Questions Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229104100.H48518@monorchid.lemis.com> References: <20011228181009.F95692@monorchid.lemis.com> <20011228133613.D25749@freebie.xs4all.nl> <20011228190613.GB1122@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20011228190613.GB1122@raggedclown.net> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 20:06:13 +0100, Cliff Sarginson wrote: > On Fri, Dec 28, 2001 at 01:36:13PM +0100, Wilko Bulte wrote: >> On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: >>> I've been using AMD processors almost exclusively in my main work >>> machines for over 4 years, and I've been very happy with them. I'm >>> currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and >>> an Athlon XP 1700. Last August, though, I bought a machine which gave >>> me a lot of trouble, the Duron 850 mentioned above. I found that it >>> would freeze for no apparent reason. I established that it wasn't the >>> memory by taking the memory of another machine and running it like >>> that; it made no difference. I ended up also changing the motherboard >>> and the processor, but the hangs continued. I could expect a hang >>> within 8 hours when doing 'make release' >> >> What I noticed for socketA boards is that they tend to be extremely picky >> about the memory you feed them. And this is not an ElCheapo mainboard, >> this is an Asus. Asus is my experience has good mainboards. >> All sorts of weird crashes, sometimes only after hours of buildworld-stress >> testing. Keeping everything else the same but swapping the memory >> solved the issue once and for all. > > I believe there is also an issue with some of the high-end Athlons > running very hot. Co-incidentally I noticed in a local computer shop the > other day a warning about using the right coolers for AMD processors. Yes, I've been bitten by this before. > Next time it goes AWOL see what the Bios thinks the temperature is > (if it has that possibility in it, mine does). Someone on a linux > list I am on was reporting temperatures >100C !! Once it hangs, the temperature probably drops again. In my experience, processors lose their minds at a little over 60°. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:13:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 33C6A37B41E for ; Fri, 28 Dec 2001 16:13:27 -0800 (PST) Received: from pool0976.cvx25-bradley.dialup.earthlink.net ([209.179.219.211]) by snipe.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16K77r-0003Qb-00; Fri, 28 Dec 2001 16:13:24 -0800 User-Agent: Microsoft-Entourage/9.0.2509 Date: Wed, 31 Dec 1969 18:41:55 -0800 Subject: Re: question about bsd From: Wes Baehr To: Doug Reynolds , "freebsd-questions@FreeBSD.ORG" Message-ID: In-Reply-To: <20011228183019.DDC5837B435@hub.freebsd.org> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 12/28/01 10:31 AM, "Doug Reynolds" wrote: > On Thu, 27 Dec 2001 15:13:19 -0800, Wes Baehr wrote: > >> >> >> On 12/26/01 2:00 PM, "Doug Reynolds" wrote: >> >>> On Wed, 26 Dec 2001 11:56:16 -0600, Murphy, Derrick wrote: >>> >>>> I have an OLD 486 25Mhz monocrome screen toshiba laptop with 4 MB of ram >>>> and >>>> a floppy drive. The hd is 200Mb What kind of unix could i install on >>>> this? Im guessing it would have to be a pretty old version to work with so >>>> little. If anyone knows of any free unix versions that would work with >>>> this, please let me know ^_^ Thanks >>> >>> picobsd. >>> >>> you need like 12mbs of ram for freebsd >> >> Not true, I run freebsd 4.3-RELEASE on a 33mhz 486 with 8MB of RAM. >> Although the performance is worse than a lagging 28.8 dialup user, it still >> 'works'. (I gave the box the name 'latency' for its slowness :P) > > i guess 8 would work, but i think you need 12 to install dont you? > > freebsd ran excellent with my amd 5x86-133 with 28megs of ram.. i used > it for a DoD ppp server and dumb stuff. wouldn't try a make world on > it though. :) my current amd 450 with 256megs and ATA 100 with do a > build world under 2hrs :) Oh, no, a make world would be hell :P I just leave it on to waste power It actually did install with 8mb of RAM installed, without complaining (I installed using the floppy disks over a net install from one of my other FreeBSD pcs) -iWes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:22:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 0C80E37B425; Fri, 28 Dec 2001 16:22:32 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 4A232786E3; Sat, 29 Dec 2001 10:52:30 +1030 (CST) Date: Sat, 29 Dec 2001 10:52:30 +1030 From: Greg Lehey To: Nils Holland Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229105230.J48518@monorchid.lemis.com> References: <20011228181009.F95692@monorchid.lemis.com> <20011228115744.A1908@tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228115744.A1908@tisys.org> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 11:57:44 +0100, Nils Holland wrote: > On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey stood up and spoke: >> I've been using AMD processors almost exclusively in my main work >> machines for over 4 years, and I've been very happy with them. I'm >> currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and >> an Athlon XP 1700. Last August, though, I bought a machine which gave >> me a lot of trouble, the Duron 850 mentioned above. I found that it >> would freeze for no apparent reason. I established that it wasn't the >> memory by taking the memory of another machine and running it like >> that; it made no difference. I ended up also changing the motherboard >> and the processor, but the hangs continued. I could expect a hang >> within 8 hours when doing 'make release' > > I bought an AMD Athlon 1000 Mhz and a Chaintech board. After assembling the > stuff, it just didn't work. Nothing. So I went to the place of purchase and > got my mainboard replaced (I kept the CPU). After reassembling my machine > with the new board, it *would* work, but after three hours, it would > suddenly reboot, and then reboot over and over again when the BIOS passes > control to the operating system. After three such reboots, I turned the > machine off, and were not able to turn it on again. It just sat there, > totally dead. I then got my board exchanged a second time, and the new > board's been running fine ever since then. Interestingly, I had a very similar problem with a motherboard I tried exchanging while chasing this problem. On shutdown, it would not power off, just go into power save. I had to hold down the power switch for 5 seconds to power it off. After that, power on would not work for about 20 minutes; turning power on showed no sign of life. I believe this was an ECS K7S5A, but I don't have any documentation left for it. > Now, I have found a lot of similar stories on the web. I guess some > mainboard manufacturer's (and even VIA as a chipset manufacturer) > seem to care very little about quality assurance. I certainly got that impression from ECS, especially the K7S5A. The instruction manual was terrible, didn't match the motherboard, the BIOS didn't allow much tweaking. I'm running my Athlon XP in an Epox 8KHA+, and that's much better. > As a side note: I have bought numeros board from Epox and never had a > single problem with them, so in my opionion, Epox (together with ASUS) is > probably one of the companies I would recommend people to buy boards from, > but Chaintech and other cheapies should probably be avoided... I had some trouble with the Epox motherboard for my Athlon 750 nearly 2 years ago (sorry, can't find the type number anywhere), but I worked round the issues and it's been running stably ever since. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:24:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 64D0537B429; Fri, 28 Dec 2001 16:23:42 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id B052F786E4; Sat, 29 Dec 2001 10:53:40 +1030 (CST) Date: Sat, 29 Dec 2001 10:53:40 +1030 From: Greg Lehey To: Glenn Johnson Cc: FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229105340.K48518@monorchid.lemis.com> References: <20011228181009.F95692@monorchid.lemis.com> <20011228204612.GA1226@gforce.johnson.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011228204612.GA1226@gforce.johnson.home> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 14:46:12 -0600, Glenn Johnson wrote: > On Fri, Dec 28, 2001 at 06:10:09PM +1030, Greg Lehey wrote: > >> I've been using AMD processors almost exclusively in my main work >> machines for over 4 years, and I've been very happy with them. I'm >> currently running a K6/233, a K6/333, an Athlon 750, a Duron 850 and >> an Athlon XP 1700. Last August, though, I bought a machine which gave >> me a lot of trouble, the Duron 850 mentioned above. I found that it >> would freeze for no apparent reason. I established that it wasn't the >> memory by taking the memory of another machine and running it like >> that; it made no difference. I ended up also changing the motherboard >> and the processor, but the hangs continued. I could expect a hang >> within 8 hours when doing 'make release' >> >> Just for the fun of it, I tried running Linux on it. I've been >> running a kernel build and 'make clean' on it now for 36 hours, and >> it's still running fine. Yesterday some Linux friends of mine came >> around and looked at it and told me that the Linux kernel I was >> running on the machine (2.4.16) had had a number of AMD-specific >> fixes put in. He didn't go into more detail, unfortunately, but I'll >> ask him again when I have time: it could be something relating to >> chipset bugs we have seen and fixed. It would help to know, though, >> if other people are experiencing similar problems. Please let me >> know if you're having problems with AMD processors which seem to be >> specific to FreeBSD, especially if they're hangs (i.e. the machine >> stops reacting, but the display still shows the last state, it doesn't >> reboot or panic). > > I have had this exact problem. I have an Epox 8KTA board with a > 1GHz Athlon (Thunderbird) with 256MB of PC-133 memory. I would > consistently get random errors, usually during a compilation, using > the default BIOS settings. After fiddling with some of the BIOS > options, such as enabling PCI burst, the system runs pretty stable. > However, occasionally I will get that freeze that you refer to during a > buildworld. As far as I can tell though if I set the memory clock to > 100MHz the problem goes away completely, or at least I have not observed > it happen yet. This is a Duron, so it has a 100 MHz memory clock anyway. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:29: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 8E29F37B41A; Fri, 28 Dec 2001 16:28:56 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id BB6AC786E4; Sat, 29 Dec 2001 10:58:54 +1030 (CST) Date: Sat, 29 Dec 2001 10:58:54 +1030 From: Greg Lehey To: =?iso-8859-1?Q?S=F8ren?= Schmidt Cc: Glenn Johnson , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229105854.L48518@monorchid.lemis.com> References: <20011228204612.GA1226@gforce.johnson.home> <200112282212.fBSMCea36745@freebsd.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <200112282212.fBSMCea36745@freebsd.dk> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 23:12:40 +0100, Søren Schmidt wrote: > It seems Glenn Johnson wrote: >> It is really hard for me to say if this is FreeBSD specific because I do >> not tend to stress the system much when I have Linux running. My wife >> has an identical system running Windows 98SE and she has no problems >> but I know that I have installed software from Epox that specifically >> addresses some issues with the VIA chipset so that may be why. > >> From what I can tell the newest Epox BIOS for the 8kta3 does *not* > install the 686b fix when it doesn't detect a SBLive! sound card, > nice but not good enough :/ Hmm, it has just occurred to me that this 686B fix relates to ata disks, doesn't it? The machine I'm having the problem with doesn't have any ata disks: I deliberately took them out to eliminate this source of problems. So this could be a different problem. Greg -- See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:37:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from midway.uchicago.edu (midway.uchicago.edu [128.135.12.12]) by hub.freebsd.org (Postfix) with ESMTP id E88B737B41B for ; Fri, 28 Dec 2001 16:37:29 -0800 (PST) Received: from harper.uchicago.edu (daemon@harper.uchicago.edu [128.135.12.7]) by midway.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT0bTW20997 for ; Fri, 28 Dec 2001 18:37:29 -0600 (CST) Received: from localhost (dsyphers@localhost) by harper.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT0bTp13734 for ; Fri, 28 Dec 2001 18:37:29 -0600 (CST) X-Authentication-Warning: harper.uchicago.edu: dsyphers owned process doing -bs Date: Fri, 28 Dec 2001 18:37:29 -0600 (CST) From: David Syphers To: freebsd-questions@freebsd.org Subject: hangs on local package initialization Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm running a 4-stable JPSNAP from Dec. 27. It worked fine, but now it won't boot all the way - it hangs on "local package initialization", so I can never log in. Even though this part of the boot process is after almost everything else, including starting sshd, I can't log in remotely either (or even ping). I know the problem's not with the kernel (this kernel boot fine before, and GENERIC hangs the same way). The only changes I made before this happened were to change the kernel securelevel to 3, install apache-mod_ssl, and open port 443 on my firewall. Any ideas? Please cc:. Thanks, David To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:41:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from niwun.pair.com (niwun.pair.com [209.68.2.70]) by hub.freebsd.org (Postfix) with SMTP id 7200937B420 for ; Fri, 28 Dec 2001 16:41:23 -0800 (PST) Received: (qmail 19979 invoked by uid 3193); 29 Dec 2001 00:41:21 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 29 Dec 2001 00:41:21 -0000 Date: Fri, 28 Dec 2001 19:41:21 -0500 (EST) From: Mike Silbersack X-Sender: To: Greg Lehey Cc: Glenn Johnson , FreeBSD Questions , FreeBSD Hackers Subject: Re: Does FreeBSD have a problem with some AMD processors? In-Reply-To: <20011229105340.K48518@monorchid.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001, Greg Lehey wrote: > This is a Duron, so it has a 100 MHz memory clock anyway. > > Greg Not necessarily; athlons & durons use ddr clocking, so the processors are 200 or 266, effectively. Most motherboards let you set the memory bus to either 100 or 133, independent of processor bus speed. I'm running both of my durons with the ram at 133Mhz. While we're on this subject, I did buy a stick of Micron 256MB PC133 about a month or so ago, and it turned out to be bad and in need of replacing; bad ram is what I'd suspect first in any case of serious crashing. (Excluding the subtle corruption problems Matt / Soren are looking into.) Mike "Silby" Silbersack To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:47:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mx.pitdc1.stargate.net (smtp2.mx.pitdc1.stargate.net [206.210.69.142]) by hub.freebsd.org (Postfix) with SMTP id 73ED237B41F for ; Fri, 28 Dec 2001 16:47:21 -0800 (PST) Received: (qmail 4223 invoked from network); 29 Dec 2001 00:47:11 -0000 Received: from dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (216.151.64.67) by smtp2.mx.pitdc1.stargate.net with SMTP; 29 Dec 2001 00:47:11 -0000 Received: (qmail 537 invoked from network); 29 Dec 2001 00:47:10 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net with SMTP; 29 Dec 2001 00:47:10 -0000 From: "Doug Reynolds" To: "freebsd-questions" Date: Fri, 28 Dec 2001 19:48:37 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: ipfw rules Message-Id: <20011229004721.73ED237B41F@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG can someone pick this apart and see if it is ok?? i want to run: httpd sshd ftpd smtp telnet & pop3 i pickup this up off google someplace and changed it a bit # Define the firewall command (as in /etc/rc.firewall) for easy # reference. Helps to make it easier to read. fwcmd="/sbin/ipfw" # Force a flushing of the current rules before we reload. $fwcmd -f flush # Divert all packets through the tunnel interface. $fwcmd add divert natd all from any to any via tun0 # Allow all data from my network card and localhost. Make sure you # change your network card (mine was fxp0) before you reboot. :) $fwcmd add allow ip from any to any via lo0 $fwcmd add allow ip from any to any via xl0 # Allow all connections that I initiate. $fwcmd add allow tcp from any to any out xmit tun0 setup # Once connections are made, allow them to stay open. $fwcmd add allow tcp from any to any via tun0 established # Everyone on the internet is allowed to connect to the following # services on the machine. This example specifically allows connections # to ssh and apache. $fwcmd add allow tcp from any to any 80 setup # httpd $fwcmd add allow tcp from any to any 22 setup # ssh $fwcmd add allow tcp from any to any 21 setup # ftp $fwcmd add allow udp from any to any 21 setup $fwcmd add allow tcp from any to any 20 setup # ftp-data #$fwcmd add allow udp from any to any 20 setup $fwcmd add allow tcp from any to any 25 setup # smtp #$fwcmd add allow udp from any to any 25 setup $fwcmd add allow tcp from any to any 465 setup # ssl smtp #$fwcmd add allow udp from any to any 465 setup $fwcmd add allow tcp from any to any 110 setup # pop3 $fwcmd add allow udp from any to any 110 setup $fwcmd add allow tcp from any to any 23 setup # telnet $fwcmd add allow udp from any to any 23 setup # This sends a RESET to all ident packets. $fwcmd add reset log tcp from any to any 113 in recv tun0 # Allow outgoing DNS queries ONLY to the specified servers. $fwcmd add allow udp from any to any 53 out xmit tun0 # Allow them back in with the answers... :) $fwcmd add allow udp from any 53 to any in recv tun0 # Allow ICMP (for ping and traceroute to work). You may wish to # disallow this, but I feel it suits my needs to keep them in. $fwcmd add 65435 allow icmp from any to any # Deny all the rest. $fwcmd add 65435 deny log ip from any to any --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 16:49:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id C532137B41E for ; Fri, 28 Dec 2001 16:49:05 -0800 (PST) Received: (qmail 29927 invoked from network); 29 Dec 2001 00:49:03 -0000 Received: from dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (216.151.64.67) by smtp3.mx.pitdc1.stargate.net with SMTP; 29 Dec 2001 00:49:03 -0000 Received: (qmail 555 invoked from network); 29 Dec 2001 00:49:01 -0000 Received: from mother.wg.local (HELO mother.wastegate.net) (192.168.1.2) by dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net with SMTP; 29 Dec 2001 00:49:01 -0000 From: "Doug Reynolds" To: "freebsd-questions@FreeBSD.ORG" , "Wes Baehr" Date: Fri, 28 Dec 2001 19:50:29 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: question about bsd Message-Id: <20011229004906.C532137B41E@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 31 Dec 1969 18:41:55 -0800, Wes Baehr wrote: >> i guess 8 would work, but i think you need 12 to install dont you? >> >> freebsd ran excellent with my amd 5x86-133 with 28megs of ram.. i used >> it for a DoD ppp server and dumb stuff. wouldn't try a make world on >> it though. :) my current amd 450 with 256megs and ATA 100 with do a >> build world under 2hrs :) > >Oh, no, a make world would be hell :P I just leave it on to waste power >It actually did install with 8mb of RAM installed, without complaining (I >installed using the floppy disks over a net install from one of my other >FreeBSD pcs) you oughta try it and put it in the world book for the slowest make wold :) --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17: 1:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from midway.uchicago.edu (midway.uchicago.edu [128.135.12.12]) by hub.freebsd.org (Postfix) with ESMTP id 87A2537B425 for ; Fri, 28 Dec 2001 17:01:51 -0800 (PST) Received: from harper.uchicago.edu (daemon@harper.uchicago.edu [128.135.12.7]) by midway.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT11pW04122 for ; Fri, 28 Dec 2001 19:01:51 -0600 (CST) Received: from localhost (dsyphers@localhost) by harper.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT11og19417 for ; Fri, 28 Dec 2001 19:01:50 -0600 (CST) X-Authentication-Warning: harper.uchicago.edu: dsyphers owned process doing -bs Date: Fri, 28 Dec 2001 19:01:50 -0600 (CST) From: David Syphers To: freebsd-questions@freebsd.org Subject: follow up: hangs on local package initialization Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I emailed too hastily... I can in fact remotely log in and ping the computer when it hangs on local package initialization. The reason I couldn't before is that I booted from GENERIC, which doesn't support my network card :) The problem seems to be that I can't start apache. A ctrl-c will get me past the boot hang up, but won't solve the apache problem. -David To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17: 2:44 2001 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id D6BC437B42B; Fri, 28 Dec 2001 17:02:06 -0800 (PST) To: FreeBSD-questions@FreeBSD.org Subject: How to get best results from FreeBSD-questions Message-Id: <20011229010206.D6BC437B42B@hub.freebsd.org> Date: Fri, 28 Dec 2001 17:02:06 -0800 (PST) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How to get the best results from FreeBSD questions. =================================================== Last update 3 September 1999 This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from Majordomo@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions mailing list! If you ever want to remove yourself from this mailing list, you can send mail to "Majordomo@FreeBSD.ORG" with the following command in the body of your email message: unsubscribe freebsd-questions Greg Lehey Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as grog@lemis.de. Since then, I have changed it to grog@lemis.com. If I were to try to remove grog@lemis.com from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.org, and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions, -newbies or -hackers? =================================================== Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In addition, the FreeBSD-newbies list caters specifically for people who are new to FreeBSD and may be having trouble getting used to the environment. In some cases, it's not really clear which group you should ask. The following criteria should help for 99% of all questions, however: If the question is of a general nature, first check whether this isn't a Frequently Asked Question (FAQ). There's a list of these questions at http://www.freebsd.org/FAQ/FAQ.html, and also on your own system (once you've installed it) at /usr/share/doc/FAQ/FAQ.html. Check there, and if you don't find an answer, ask FreeBSD-questions. Examples might be questions about installing FreeBSD or the use of a particular UNIX utility. If you think the question relates to a bug, but you're not sure, or you don't know how to look for it, send the message to FreeBSD-questions. If the question relates to a bug, and you're almost sure that it's a bug (for example, you can pinpoint the place in the code where it happens, and you maybe have a fix), then send the message to FreeBSD-hackers. You should also enter a problem report with the send-pr utility. If the question relates to enhancements to FreeBSD, and you can make suggestions about how to implement them, then send the message to FreeBSD-hackers. If the question is of particularly technical nature, such as implementation details or suggestions for improvements, then send the message to FreeBSD-hackers. If you're new to FreeBSD, and the message is about your own relationship to FreeBSD, send the message to FreeBSD-newbies. There are also a number of other specialized mailing lists, for example FreeBSD-isp, which caters to the interests of ISPs (Internet Service Providers) who run FreeBSD. If you happen to be an ISP, this doesn't mean you should automatically send your questions to FreeBSD-isp. The criteria above still apply, and it's in your interest to stick to them, since you're more likely to get good results that way. IV: How to submit a question ============================= When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer even if you follow these rules. It's much more possible to not get an answer if you don't. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. ``FreeBSD problem'' or ``Help'' aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers or badly configured mailers. The following mailers are known to send out badly formatted messages without you finding out about them: Eudora exmh Microsoft Exchange Microsoft Internet Mail Microsoft Outlook Netscape As you can see, the mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. For further information on this subject, check out http://www.lemis.com/email.html. 4. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 5. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 6. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: If you get error messages, don't say ``I get error messages'', say (for example) ``I get the error message 'No route to host'''. If your system panics, don't say ``My system panicked'', say (for example) ``my system panicked with the message 'free vnode isn't'''. If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. If you have difficulty getting PPP to run, describe the configuration. Which version of PPP do you use? What kind of authentication do you have? Do you have a static or dynamic IP address? What kind of messages do you get in the log file? 7. If you don't get an answer immediately, or if you don't even see your own message appear on the list immediately, don't resend the message. Wait at least 24 hours. The FreeBSD mailer offloads messages to a number of subordinate mailers around the world, and sometimes it can take several hours for the mail to get through. And once it gets through, the one person who might know the answer will probably just have gone to bed in his part of the world. 8. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question (yes, it's the same one in each case :-). You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- V: How to follow up to a question ================================= Often you will want to send in additional information to a question you have already sent. The best way to do this is to reply to your original message. This has three advantages: 1. You include the original message text, so people will know what you're talking about. Don't forget to trim unnecessary text out, though. 2. The text in the subject line stays the same (you did remember to put one in, didn't you?). Many mailers will sort messages by subject. This helps group messages together. 3. The message reference numbers in the header will refer to the previous message. Some mailers, such as mutt, can thread messages, showing the exact relationships between the messages. VI: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure you understand the question? Very frequently, the person who asks the question is confused or doesn't express himself very well. Even with the best understanding of the system, it's easy to send a reply which doesn't answer the question. This doesn't help: you'll leave the person who submitted the question more frustrated or confused than ever. If nobody else answers, and you're not too sure either, you can always ask for more information. 5. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 6. Unless there's a good reason to do otherwise, reply to the sender and to FreeBSD-questions. Many people on the FreeBSD-questions are "lurkers": they learn by reading messages sent and replied to by others. If you take a message which is of general interest off the list, you're depriving these people of their information. Be careful with group replies; lots of people send messages with hundreds of CCs. If this is the case, be sure to trim the Cc: lines appropriately. 7. Include relevant text from the original message. Trim it to the minimum, but don't overdo it. It should still be possible for somebody who didn't read the original message to understand what you're talking about. 8. Use some technique to identify which text came from the original message, and which text you add. I personally find that prepending ``> '' to the original message works best. Leaving white space after the ``> '' and leave empty lines between your text and the original text both make the result more readable. 9. Put your response in the correct place (after the text to which it replies). It's very difficult to read a thread of responses where each reply comes before the text to which it replies. 10. Most mailers change the subject line on a reply by prepending a text such as ``Re: ''. If your mailer doesn't do it automatically, you should do it manually. 11. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), please fix it. In the case of an incorrect subject line (such as ``HELP!!??''), change the subject line to (say) ``Re: Difficulties with sync PPP (was: HELP!!??)''. That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17: 3:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id C9FC137B426; Fri, 28 Dec 2001 17:02:10 -0800 (PST) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", third edition: errata and addenda Message-Id: <20011229010210.C9FC137B426@hub.freebsd.org> Date: Fri, 28 Dec 2001 17:02:10 -0800 (PST) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, third edition Last revision: 2 August 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the third edition, formatted on 17 May 1999. You'll find this information on page iv (the page before the beginning of the Table of Contents). See the end of this document for instructions on how to find the errata for an older version. You can get the current document in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ps. See page 302 of the third edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-3.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at Page ii _______ The instructions on page ii (opposite the title page) tell you to look at ftp://ftp.lemis.com/pub/cfbsd/errata-2 for the errata list. That's wrong. Look at this list. Pages 190 and 191 _________________ The description is not very clear about which text appears when booting from floppy for initial install, and which appears when booting normally. The procedure is very similar, but there are some differences. Add the following text after the heading Boot messages: You'll boot your system in at least two different ways: initially you'll boot from floppy or CD-ROM in order to install the system. Later, after the system is installed, you'll boot from hard disk. The procedure is almost identical, so we'll look at both versions in the following examples. Replace the text from the middle of page 191 with: If you're booting from 1.44 MB floppies, you will then see: Please insert MFS root floppy and press enter: When you insert the MFS root floppy and press Enter, you see more twirling batons, then the UserConfig screen appears. UserConfig: Modifying the boot configuration ____________________________________________ After the kernel has been loaded, the following screen will appear if you are installing the system, or if you have requested it with the -c option to the boot loader: Page 206 ________ The bottom two lines on this page should be in bold constant font, indicating that this is input for your /etc/rc.config file Page 2 Errata and addenda for the Complete FreeBSD, third edition nfs_client_enable="YES" # This host is an NFS client (or NO). nfs_server_enable="YES" # This host is an NFS server (or NO). Page 265 ________ The example on the second half of the page refers to the old SCSI driver. The scsi program is no longer available in FreeBSD 3.x. Instead, use the camcontrol program. Replace the text with:. Modern disks make provisions for recovering from such errors by allocating an alternate sector for the data. IDE drives do this automatically, but with SCSI drives you have the option of enabling or disabling reallocation. Usually it is turned on when you buy them, but occasionally it is not. When installing a new disk, you should check that the parameters ARRE (Auto Read Reallocation Enable) and AWRE (Auto Write Reallocation Enable) are turned on. For example, to check and set the values for disk da1, you would enter: # camcontrol modepage da1 -m 1 -e -P 3 # scsi -f /dev/rda1c -m 1 -e -P 3 This command will start up your favourite editor (either the one specified in the EDITOR environment variable, or vi by default) with the following data: AWRE (Auto Write Reallocation Enbld): 0 ARRE (Auto Read Reallocation Enbld): 1 TB (Transfer Block): 0 RC (Read Continuous): 0 EER (Enable Early Recovery): 0 PER (Post Error): 0 DTE (Disable Transfer on Error): 0 DCR (Disable Correction): 0 Read Retry Count: 16 Correction Span: 41 Head Offset Count: 0 Data Strobe Offset Count: 0 Write Retry Count: 16 Recovery Time Limit: 0 The values for AWRE and ARRE should both be 1. If they aren't, as in this case, where AWRE is 0, change the data with the editor, save it, and exit. The camcontrol program will write the data back to the disk and enable the option. Page 3 The Complete FreeBSD Page 331 ________ The description of the config refers to the SCSI drive sd0. This is the old name; in FreeBSD version 3, SCSI drives are called da, so this reference should be da0. Thanks to Francisco Reyes for pointing out this problem. Page 362 ________ Replace the text at the top of the page with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention, and to Francisco Reyes and Bill Fumerola for pointing out that it still wasn't fixed in the third edition. Page 409 ________ The information on setting the default routers specified the wrong end of the PPP links in some places. It should always be the ``far'' end of the link. Replace the second example on page 409, and the text following it, with this text: defaultrouter="139.130.136.129" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="YES" # Set to YES if this host will be a gateway. This is the normal way to set the default route on a point-to-point interface. In fact, for PPP you don't need to specify the default address: the PPP packages will set it for you when the link comes up. This makes it possible to Page 4 Errata and addenda for the Complete FreeBSD, third edition set default routes when you're forced to use dynamic IP addresses, where you don't know the address at this point. We'll see how PPP does this on page 446. In the first example on page 410, the sixth example on page 412 and the second example on page 413, replace the defaultrouter definition with: defaultrouter="139.130.237.65" # Set to default gateway (or NO). Thanks to Andreas Longwitz for pointing out this error. Getting errata for older editions of the book _____________________________________________ There have been a total of five different versions of ``The Complete FreeBSD''. The most accurate way to distinguish them is by the format date, which you'll find at the bottom of page iv (the page before the beginning of the Table of Contents) in all versions of the book. 1. The first was titled ``Installing and running FreeBSD'', and was formatted on 24 February 1996. No errata list exists for this book. 2. For the first edition (19 July 1996), get ftp://ftp.lemis.com/pub/cfbsd/er- rata-1. This same file is also available via the web link http://www.lemis.com/errata-1. I am no longer updating this errata list. 3. The list for the second edition (16 December 1997) is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the second edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only Page 5 Getting errata for older editions of the book take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. 4. The revised second edition was formatted on 11 February 1999. As the name suggests, it's not a complete new edition: in fact, only three chapters are different: o The chapter ``Setting up X11'' has been brought up to date. o Appendix D (``Contents of the Ports Collection'') has been replaced by two appendixes, ``Errata and Addenda'' (the errata list up to date at the time) and ``FreeBSD 3.0'', which describes the differences between FreeBSD 2.x and FreeBSD 3.x. There is no separate errata list for this book. Refer to the second edition errata list. 5. The current, third edition, formatted on 17 May 1999. This is the correct list for this edition. Page 6 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17: 4:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id 1321637B41F; Fri, 28 Dec 2001 17:02:08 -0800 (PST) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", second edition: errata and addenda Message-Id: <20011229010208.1321637B41F@hub.freebsd.org> Date: Fri, 28 Dec 2001 17:02:08 -0800 (PST) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, second edition Last revision: 21 June 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the second edition, formatted on 16 December 1997. If you have this book, please check this list. If you have the first edition of 19 July 1996, please check ftp://ftp.lemis.com/pub/cfbsd/errata-1. This same file is also available via the web link http://www.lemis.com/. This list is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the book to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at General changes _______________ o In a number of places, I suggest the use of the following command to find process information: $ ps aux | grep foo Unfortunately, ps is sensitive to the column width of the terminal emulator upon which it is working. This command usually works fine on a relatively wide xterm, but if you're running on an 80-column terminal, it may truncate exactly the information you're looking for, so you end up with no output. You can fix that with the w option: $ ps waux | grep foo Thanks to Sue Blake for this information Location of the sample files ____________________________ On the 2.2.5 CD-ROM only, the location of the sample files does not match the specifications in the book (/book on the first CD-ROM). The 2.2.5 CD-ROM came out before the book, and it contains the files on the third (repository) CD-ROM as a single gzipped tar file /xperimnt/cfbsd/cfbsd.tar.gz. It contains the following files: drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/ drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/mutt/ -rw-r--r-- jkh/jkh 352 Oct 15 15:21 1997 cfbsd/mutt/.mail_aliases -rw-r--r-- jkh/jkh 9394 Oct 15 15:22 1997 cfbsd/mutt/.muttrc drwxr-xr-x jkh/jkh 0 Oct 17 14:02 1997 cfbsd/scripts/ -rw-r--r-- jkh/jkh 18281 Oct 16 16:52 1997 cfbsd/scripts/.fvwm2rc -rwxr-xr-x jkh/jkh 1392 Oct 17 12:54 1997 cfbsd/scripts/install-desktop -rw-r--r-- jkh/jkh 296 Oct 17 12:35 1997 cfbsd/scripts/.xinitrc -rwxr-xr-x jkh/jkh 622 Oct 17 13:51 1997 cfbsd/scripts/install-rcfiles -rw-r--r-- jkh/jkh 1133 Oct 17 13:00 1997 cfbsd/scripts/Uutry -rw-r--r-- jkh/jkh 1028 Oct 17 14:02 1997 cfbsd/scripts/README drwxr-xr-x jkh/jkh 0 Oct 18 19:32 1997 cfbsd/docs/ -rw-r--r-- jkh/jkh 199111 Oct 16 14:29 1997 cfbsd/docs/packages.txt Page 2 Errata and addenda for the Complete FreeBSD, second edition -rw-r--r-- jkh/jkh 189333 Oct 16 14:28 1997 cfbsd/docs/packages-by-category.txt -rw-r--r-- jkh/jkh 188108 Oct 16 14:29 1997 cfbsd/docs/packages.ps -rw-r--r-- jkh/jkh 226439 Oct 16 14:27 1997 cfbsd/docs/packages-by-category.ps -rw-r--r-- jkh/jkh 788 Oct 16 15:01 1997 cfbsd/README -rw-r--r-- jkh/jkh 248 Oct 17 11:52 1997 cfbsd/errata To extract one of these files, say cfbsd/docs/packages.txt, and assuming you have the CD-ROM mounted as /cdrom, enter: # cd /usr/share/doc # tar xvzf /cdrom/xperimnt/cfbsd/cfbsd.tar.gz cfbsd/docs/packages.txt See page 209 for more information on using tar. These files are an early version of what is described in the book. I'll put up some updated versions on ftp://ftp.lemis.com/ in the near future. Thanks to Frank McCormick for drawing this to my attention. Chapter 8: Setting up X11 _________________________ For FreeBSD 2.2.7, this chapter has changed sufficiently to make it impractical to distribute errata. You can download the PostScript version from ftp://www.lemis.com/pub/cfbsd/xsetup.ps, or the ASCII version from ftp://www.lemis.com/pub/cfbsd/xsetup.txt. No HTML version is available. Page xxxiv __________ Before the discussion of the shell prompts in the middle of the page, add: In this book, I recommend the use of the Bourne shell or one of its descendents (sh, bash, pdksh, ksh or zsh). With the exception of sh, they are all in the Ports Collection. I personally use the bash shell. This is a personal preference, and a recommendation, but it's not the standard shell. The standard BSD shell is the C shell (csh), which has a fuller- featured descendent tcsh. In particular, the standard installation sets the root user up with a csh. See page 152 (in this errata) for details of how to change the shell. Page 3 General changes Page 11: Reading the handbook _____________________________ The CD-ROM now includes Netscape. Replace the last paragraph on the page and the example on the following page with: If you're running X, you can use a browser like netscape to read the handbook. If you don't have X running yet, use lynx. Both of these programs are included on the CD-ROM. To install them, enter: # pkg_add /cdrom/packages/All/netscape-communicator-4.5.tgz or # pkg_add /cdrom/packages/All/lynx-2.8.1.1.tgz The numbers after the name (4.5 and 2.8.1.1) may change after this book has been printed. Use ls to list the names if you can't find these particular versions. Note that lynx is not a complete substitute for netscape: since it is text- only, it is not capable of displaying the large majority of web pages correctly. It will suffice for reading most of the handbook, however. Thanks to Stuart Henderson and for drawing this to my attention. Page 12: Printing the handbook ______________________________ The instructions for formatting the handbook are obsolete. Replace the section starting Alternatively, you can print out the handbook with the following text: Alternatively, you can print out the handbook. You need to have the documentation sources (/usr/doc) installed on your system. You can find them on the second CD-ROM in the directory of the same name. To install them, first mount your CD-ROM (see page 175). Then enter: $ cd /cdrom/usr/doc/handbook $ mkdir -p /usr/doc/handbook you may need to be root for this operation $ cp -pr * /usr/doc/handbook You have a choice of formats for the output: o ascii will give you plain 7-bit ASCII output, suitable for reading on a character-mode terminal. Page 4 Errata and addenda for the Complete FreeBSD, second edition o html will give you HTML output, suitable for browsing with a web browser. o latex will give you LATEX format, suitable for further processing with TEX and LATEX. o ps will give you PostScript output, probably the best choice for printing. o roff will give you output in troff source. You can process this output with nroff or troff, but it's currently not very polished. LATEX output is a better choice if you want to process it further. Once you have decided your format, use make to create the document. For example, if you decide on PostScript format, you would enter: $ make FORMATS=ps This creates a file handbook.ps which you can then print to a PostScript printer or with the aid of ghostscript (see page 222). Thanks to Bob Beer for drawing this to my attention. Page 45: Preparing floppies for installation _____________________________________________ Replace the paragraph below the list of file names (in the middle of the page) with: The floppy set should contain the file bin.inf and the ones whose names start with bin. followed by two letters. These other files are all 240640 bytes long, except for the final one which is usually shorter. Use the MS-DOS COPY program to copy as many files as will fit onto each disk (5 or 6) until you've got all the distributions you want packed up in this fashion. Copy each distribution into subdirectory corresponding to the base name--for example, copy the bin distribution to the files A:\BIN\BIN.INF, A:\BIN\BIN.AA and so on. Page 80 and 81 ______________ In a couple of examples, the FreeBSD partition is shown as type 164. It should be 165. Thanks to an unknown contributer for this correction (sorry, I lost your name). Page 5 General changes Page 88: setting up for dumping _______________________________ The example mentions a variable savecore in /etc/rc.conf. This variable is no longer used--it's enough to set the variable dumpdev. Page 92 _______ At the end of the section How to install a package add the text: Alternatively, you can install packages from the /stand/sysinstall Final Configuration Menu. We saw this menu on page in figure 4-14 on page 71. When you start sysinstall from the command line, you get to this menu by selecting Index, and then selecting Configure. Page 93 _______ Before the heading Install ports from the first CD-ROM add: Install ports when installing the system ________________________________________ The file ports/ports.tgz on the first CD-ROM is a tar archive containing all the ports. You can install it with the base system if you select the Custom distribution and include the ports collection. If you didn't install them at the time, use the following method to install them all (about 40 MB). Make sure your CD-ROM is mounted (in this example on /cdrom), and enter: Page 96 _______ Replace the example at the top of the page with: Instead, do: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # for i in *; do > ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i > done Page 6 Errata and addenda for the Complete FreeBSD, second edition If you're using csh or tcsh, enter: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # foreach i (*) ? ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i ? end Thanks to Christopher Raven and Francois Jacques for drawing this to my attention. Page 104 ________ The examples at the bottom of the page and the top of the next page specify the wrong directory (/usr). It should be /usr/X11R6. Replace the examples with: For a full install, choose /cdrom/dists/XF86331/X331*.tgz. If you are using sh, enter: # cd /usr/X11R6 # for i in /cdrom/dists/XF86331/X331*.tgz; do # tar xzf $i # done If you are using csh, enter: % cd /usr/X11R6 % foreach i (/cdrom/dists/XF86331/X331*.tgz) % tar xzf $i % end For a minimal installation, first choose a server archive corresponding to your VGA board. If table 8-2 on page 103 doesn't give you enough information, check the server man pages, starting on page 1545, which list the VGA chip sets supported by each server. For example, if you have an ET4000 based board you will use the XF86_SVGA server. In this case you would enter: # cd /usr/X11R6 # tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here # for i in bin fnts lib xicf; do # tar xzf /cdrom/dists/XF86331/X331$i.tgz # done Page 7 Install ports when installing the system If you are using csh, enter: % cd /usr/X11R6 % tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here % foreach i (bin fnts lib xicf) % tar xzf /cdrom/dists/XF86331/$i % end Thanks to Manuel Enrique Garcia Cuesta for pointing out this one. Page 128 ________ Replace the complete text below the example with the following: These values are defaults, and many are either incorrect for FreeBSD (for example the device name /dev/com1) or do not apply at all (for example Xqueue). If you are configuring manually, select one Protocol and one Device entry from the following selection. If you must use a two-button mouse, uncomment the keyword Emulate3Buttons--in this mode, pressing both mouse buttons simultane- ously within Emulate3Timeout milliseconds causes the server to report a middle button press. Section "Pointer" Protocol "Microsoft" for Microsoft protocol mice Protocol "MouseMan" for Logitech mice Protocol "PS/2" for a PS/2 mouse Protocol "Busmouse" for a bus mouse Device "/dev/ttyd0" for a mouse on the first serial port Device "/dev/ttyd1" for a mouse on the second serial port Device "/dev/ttyd2" for a mouse on the third serial port Device "/dev/ttyd3" for a mouse on the fourth serial port Device "/dev/psm0" for a PS/2 mouse Device "/dev/mse0" for a bus mouse Emulate3Buttons only for a two-button mouse EndSection You'll notice that the protocol name does not always match the manufacturer's Page 8 Errata and addenda for the Complete FreeBSD, second edition name. In particular, the Logitech protocol only applies to older Logitech mice. The newer ones use either the MouseMan or Microsoft protocols. Nearly all modern serial mice run one of these two protocols, and most run both. If you are using a bus mouse or a PS/2 mouse, make sure that the device driver is included in the kernel. The GENERIC kernel contains drivers for both mice, but the PS/2 driver is disabled. Use UserConfig (see page 50) to enable it. Page 140 ________ Just before the paragraph The super user add the following paragraph: If you do manage to lose the root password, all may not be lost. Reboot the machine to single user mode (see page 157), and enter: # mount -u / mount root file system read/write # mount /usr mount /usr file system (if separate) # passwd root change the password for root Enter new password: Enter password again: # ^D enter ctrl-D to continue with startup If you have a separate /usr file system (the normal case), you need to mount it as well, since the passwd program is in the directory /usr/bin. Note that you should explicitly state the name root: in single user mode, the system doesn't have the concept of user IDs. Page 148 ________ Replace the text at the top of the page with: Modern shells supply command line editing which resembles the editors vi or Emacs. In bash, sh, ksh, and zsh you can make the choice by entering Page 152 ________ After figure 10-8, add the following text: It would be tedious for every user to put settings in their private initialization files, so the shells also read a system-wide default file. For the Bourne shell family, it is /etc/profile, while the C shell family has three Page 9 Install ports when installing the system files: /etc/csh.login to be executed on login, /etc/csh.cshrc to be executed when a new shell is started after you log in, and /etc/csh.logout to be executed when you stop a shell. The start files are executed before the corresponding individual files. In addition, login classes (page 141) offer another method of setting environment variables at a global level. Changing your shell ___________________ The FreeBSD installation gives root a C shell, csh. This is the traditional Berkeley shell, but it has a number of disadvantages: command line editing is very primitive, and the script language is significantly different from that of the Bourne shell, which is the de facto standard for shell scripts: if you stay with the C shell, you may still need to understand the Bourne shell. The latest version of the Bourne shell sh also includes some command line editing. See page 148 for details of how to enable it. You can get better command line editing with tcsh, in the Ports Collection. You can get both better command line editing and Bourne shell syntax with bash, also in the Ports Collection. If you have root access, you can use vipw to change your shell, but there's a more general way: use chsh (Change Shell). Simply run the program. It starts your favourite editor (as defined by the EDITOR environment variable). Here's an example before: #Changing user database information for velte. Shell: /bin/csh Full Name: Jack Velte Location: Office Phone: Home Phone: You can change anything after the colons. For example, you might change this to: #Changing user database information for velte. Shell: /usr/local/bin/bash Full Name: Jack Velte Location: On the road Office Phone: +1-408-555-1999 Home Phone: Page 10 Errata and addenda for the Complete FreeBSD, second edition chsh checks and updates the password files when you save the modifications and exit the editor. The next time you log in, you get the new shell. chsh tries to ensure you don't make any mistakes--for example, it won't let you enter the name of a shell which isn't mentioned in the file /etc/shells--but it's a very good idea to check the shell before logging out. You can try this with su, which you normally use to become super user: bumble# su velte Password: su-2.00$ note the new prompt There are a couple of problems in using tcsh or bash as a root shell: o The shell for root must be on the root file system, otherwise it will not work in single user mode. Unfortunately, most ports of shells put the shell in the directory /usr/local/bin, which is almost never on the root file system. o Most shells are dynamically linked: they rely on library routines in files such as /usr/lib/libc.a. These files are not available in single user mode, so the shells won't work. You can solve this problem by creating statically linked versions of the shell, but this requires programming experience beyond the scope of this book. If you can get hold of a statically linked version, perform the following steps to install it: o Copy the shell to /bin, for example: # cp /usr/local/bin/bash /bin o Add the name of the shell to /etc/shells, in this example the line in bold print: # List of acceptable shells for chpass(1). # Ftpd will not allow users to connect who are not using # one of these shells. /bin/sh /bin/csh /bin/bash You can then change the shell for root as described above. Page 11 Install ports when installing the system Thanks to Lars Koller for drawing this to my attention. Page 160 ________ Replace the text at the fourth bullet with the augmented text: The second-level boot locates the kernel, by default the file /kernel on the root file system, and loads it into memory. It prints the Boot: prompt at this point so that you can influence this choice--see the man page on page 579 for more details of what you can enter at this prompt. Page 169 ________ Replace the last paragraph on the page with: The standard solution for these problems is to relocate the /tmp file system to a different directory, say /usr/tmp, and create a symbolic link from /usr/tmp to /tmp--see Chapter 4, Installing FreeBSD, page 72, for more details. Thanks to Charlie Sorsby for drawing this to my attention. Page 176 ________ Add the following paragraph Unmounting file systems When you mount a file system, the system assumes it is going to stay there, and in the interests of efficiency it delays writing data back to the file system. This is the same effect we discussed on page 158. As a result, if you want to stop using a file system, you need to tell the system about it. You do this with the umount command. Note the spelling--there's no n in the command name. You need to do this even with read-only media such as CD-ROMs: the system assumes it can access the data from a mounted file system, and it gets quite unhappy if it can't. Where possible, it locks removable media so that you can't remove them from the device until you unmount them. Using umount is straightforward: just tell it what to unmount, either the device name or the directory name. For example, to unmount the CD-ROM we Page 12 Errata and addenda for the Complete FreeBSD, second edition mounted in the example above, you could enter one of these commands: # umount /dev/cd1a # umount /cd1 Before unmounting a file system, umount checks that nobody is using it. If somebody is using it, it will refuse to unmount it with a message like umount: /cd1: Device busy. This message often occurs because you have changed your directory to a directory on the file system you want to remove. For example (which also shows the usefulness of having directory names in the prompt): === root@freebie (/dev/ttyp2) /cd1 16 -> umount /cd1 umount: /cd1: Device busy === root@freebie (/dev/ttyp2) /cd1 17 -> cd === root@freebie (/dev/ttyp2) ~ 18 -> umount /cd1 === root@freebie (/dev/ttyp2) ~ 19 -> Thanks to Ken Deboy for pointing out this omission. Page 180 ________ The example in the middle of the page should read: For example, to generate a second set of 32 pseudo-terminals, enter: # cd /dev # ./MAKEDEV pty1 You can generate up to 256 pseudo-terminals. They are named ttyp0 through ttypv, ttyq0 through ttyqv, ttyr0 through ttyrv, ttys0 through ttysv, ttyP0 through ttyPv, ttyQ0 through ttyQv, ttyR0 through ttyRv and ttyS0 through ttySv. To create each set of 32 terminals, use the number of the set: the first set is pty0, and the eighth set is pty7. Note that some processes, such as xterm, only look at ttyp0 through ttysv. Thanks to Karl Wagner for pointing out this error. Page 197, first line ____________________ The text of the first full sentence reads: Page 13 Install ports when installing the system The first name, up the the symbol, is the label. In fact, it should read: The first name, up to the | symbol, is the label. Page 208, middle of page ________________________ The example shows the file name /dev/rst0 when using the Bourne shell, and /dev/nrst0 when using C shell and friends. This is inconsistent; use /dev/nrst0 with any shell if you want a non-rewinding tape, or /dev/rst0 if you want a rewinding tape. Thanks to Norman C Rice for pointing out this one. Page 219 ________ Before the section Testing the spooler add the following section: As we saw above, the line printer daemon lpd is responsible for printing spooled jobs. By default it isn't started at boot time. If you're root, you can start it by name: # lpd Normally, however, you will want it to be started automatically when the system starts up. You do this by setting the variable lpd_enable in /etc/rc.conf: lpd_enable="YES" # Run the line printer daemon See page for more details of /etc/rc.conf. Another line in /etc/rc.conf refers to the line printer daemon: lpd_flags="" # Flags to lpd (if enabled). You don't normally need to change this line. See the man page for lpd for details of the flags. Thanks to Tommy G. James for bringing this to my attention. Page 14 Errata and addenda for the Complete FreeBSD, second edition Page 231 ________ Replace the first line of the example with: xhost presto bumble gw The original version allowed anybody on the Internet to access your system. Thanks to Jerry Dunham for drawing this one to my attention. Page 237 ________ In the section Installing the sample desktop, replace the first paragraph with: You'll find all the files described in this chapter on the first CD-ROM (Installation CD-ROM) in the directory /book. Remember that you must mount the CD-ROM before you can access the files--see page 175 for further details. The individual scripts are in the directory /book/scripts, but you'll probably find it easier to install them with the script install-desktop: Thanks to Chris Kaiser for drawing this to my attention. Page 242 ________ The instructions for extracting the source files from CD-ROM in the middle of page 242 are incorrect. You'll find the kernel sources on the first CD-ROM in the directory /src. Replace the example with: # mkdir -p /usr/src/sys # ln -s /usr/src/sys /sys # cd / # cat /cdrom/src/ssys.[a-d]* | tar xzvf - Thanks to Raymond Noel , Suttipan Limanond and Satwant for finding this one in several small slices. Page 15 Install ports when installing the system Page 257 ________ Replace the paragraph Berkeley Packet Filter with: pseudo-device bpfilter ______________________ The Berkeley Packet Filter (bpf) allows you to capture packets crossing a network interface to disk or to examine them with the tcpdump program. Note that this capability represents a significant compromise of network security. The number after bpfilter is the number of concurrent processes that can use the facility. Not all network interfaces support bpf. In order to use the Berkeley Packet Filter, you must also create the device nodes /dev/bpf0 to /dev/bpf3 (if you're using the default number 4). Current- ly, MAKEDEV doesn't help much--you need to create each device separately: # cd /dev # ./MAKEDEV bpf0 # ./MAKEDEV bpf1 # ./MAKEDEV bpf2 # ./MAKEDEV bpf3 Thanks to Christopher Raven for drawing this to my attention. Page 264 ________ In the list of disk driver flags, add: o Bit 12 (0x1000) enables LBA (logical block addressing mode). If this bit is not set, the driver accesses the disk in CHS (cylinder/head/sector) mode. o In CHS mode, if bits 11 to 8 are not equal to 0, they specify the number of heads to assume (between 1 and 15). The driver recalculates the number of cylinders to make up the total size of the disk. Page 16 Errata and addenda for the Complete FreeBSD, second edition Page 273, ``Building the kernel'' _________________________________ Replace the example with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention. Page 283, ``Creating the source tree'' ______________________________________ Add a third point to what you need to know: 3. Possibly, the date of the last update that you want to be included in the checkout. If you specify this date, cvs ignores any more recent updates. This option is often useful when somebody discovers a recently introduced bug in -CURRENT: you check out the modules as they were before the bug was introduced. You specify the date with the -D option, for example -D "10 December 1997". Page 285, after the second example. ___________________________________ Add the text: If you need to check out an older version, for example if there are problems with the most recent version of -CURRENT, you could enter: # cvs co -D "10 December 1997" src/sys This command checks out the kernel sources as of 10 December 1997. Page 17 Install ports when installing the system Page 294 ________ Add the following section: Problems executing Linux binaries _________________________________ One of the problems with the ELF format used by more recent Linux binaries is that they usually contain no information to identify them as Linux binaries. They might equally well be BSD/OS or UnixWare binaries. That's not really a problem at this point, since the only ELF format that FreeBSD 3.2 understands is Linux, but FreeBSD-CURRENT recognizes a native FreeBSD ELF format as well, and of course that's the default. If you want to run a Linux ELF binary on such a system, you must brand the executable using the program brandelf. For example, to brand the StarOffice program swriter3, you would enter: # brandelf -t linux /usr/local/StarOffice-3.1/linux-x86/bin/swriter3 Thanks to Dan Busarow for bringing this to my attention. Page 364, middle of page ________________________ Change the text from: The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though they may be in lower case. to The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though newer versions of ppp allow you to write them in lower case. Thanks to Mark S. Reichman for this correction. Page 368 ________ Replace the paragraph after the second example with: In FreeBSD version 3.0 and later, specify the options PPP_BSDCOMP and Page 18 Errata and addenda for the Complete FreeBSD, second edition PPP_DEFLATE to enable two kinds of compression. You'll also need to specify the corresponding option in Kernel PPP's configuration file. These options are not available in FreeBSD version 2. Thanks to Brian Somers for this information. Page 397 ________ In the section ``Nicknames'', the example should read: www IN CNAME freebie ftp IN CNAME presto In other words, there should be a space between CNAME and the system name. Page 422 ________ Replace the text above the example with: tcpdump is a program which monitors a network interface and displays selected information which passes through it. It uses the Berkeley Packet Filter (bpf), an optional component of the kernel. It is not included in the GENERIC kernel: see page 257 for information on how to configure it. If you don't configure the Berkeley Packet Filter, you will get a message like tcpdump: /dev/bpf0: device not configured If you forget to create the devices for bpf, you will get a message like: tcpdump: /dev/bpf0: No such file or directory Since tcpdump poses a potential security problem, you must be root in order to run it. The simplest way to run it is without any parameters. This will cause tcpdump to monitor and display all traffic on the first active network interface, normally Ethernet: Thanks to Christopher Raven for drawing this to my attention. Page 19 Install ports when installing the system Page 423 ________ The description at the top of the page incorrectly uses the term IP address instead of Ethernet address. In addition, a page number reference is incorrect. Replace the paragraph with: o Line 1 shows an ARP request: system presto is looking for the Ethernet address of wait. It would appear that wait is currently not responding, since there is no reply. o Line 2 is not an IP message at all. tcpdump shows the Ethernet addresses and the beginning of the packet. We don't consider this kind of request in this book. o Line 3 is a broadcast ntp message. We looked at ntp on page 160. o Line 4 is another attempt by presto to find the IP address of wait. o Line 5 is a broadcast message from bumble on the rwho port, giving information about its current load averages and how long it has been up. See the man page for rwho on page 1167 for more information. o Line 6 is from a TCP connection between port 6000 on freebie and port 1089 on presto. It is sending 384 bytes (with the sequence numbers 536925467 to 536925851; see page 305), and is acknowledging that the last byte it received from presto had the sequence number 325114346. The window size is 17280. o Line 7 is another ARP request. presto is looking for the Ethernet address of freebie. How can that happen? We've just seen that they have a TCP connection. In fact, ARP information expires after 20 minutes. It's quite possible that all connections between presto and freebie have been dormant for this period, so presto needs to find freebie's IP address again. o Line 8 is the ARP reply from freebie to presto giving its Ethernet address. o Line 9 shows a reply from presto on the connection to freebie that we saw on line 6. It acknowledges the data up to sequence number 536925851, but doesn't send any itself. o Line 10 shows another 448 bytes of data from freebie to presto, and acknowledging the same sequence number from presto as in line 6. Thanks to Sergei S. Laskavy for drawing this to my Page 20 Errata and addenda for the Complete FreeBSD, second edition attention. Page 450: anonymous ftp _______________________ Replace the paragraph starting with Create a user ftp: Create a user ftp, with the anonymous ftp directory as the home directory and the shell /dev/null. Using /dev/null as the shell makes it impossible to log in as user ftp, but does not interfere with the use of anonymous ftp. ftp can be a member of group bin, or you can create a new group ftp by adding the group to /etc/group. See page 138 for more details of adding users, and the man page on page 805 for adding groups. Thanks to Mark S. Reichman for drawing this to my attention. Page 466, before the ps example _______________________________ Add another bullet: o Finally, you may find it convenient to let some other system handle all your mail delivery for you: you just send anything you can't deliver locally to this other host, which sendmail calls a smart host. This is particularly convenient if you send your mail with UUCP. To tell sendmail to use a smart host (in our case, mail.example.net), find the following line in sendmail.cf: # "Smart" relay host (may be null) DS Change it to: # "Smart" relay host (may be null) DSmail.example.net Page 478, ``Running Apache'' ____________________________ The text describes the location of the server as /usr/local/www/server/httpd. This appears to depend on where you get the port from. Some people report the file being at the more likely location /usr/local/sbin/httpd (though note the Page 21 Install ports when installing the system directory sbin, not bin). Check both locations if you run into trouble. Thanks to Sue Blake for this information. Page 492 ________ Replace references to nmdb with nmbd. Page 493 ________ Replace the last paragraph on the page with: socket options is hardly mentioned in the documentation, but it's very important: many Microsoft implementations of TCP/IP are inefficient and establish a new TCP more often than necessary. Select the socket options TCP_NODELAY and IPTOS_LOWDELAY, which can speed up the response time of such applications by over 95%. Page 22 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:13:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id B9F7B37B41B for ; Fri, 28 Dec 2001 17:13:07 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id fBT1D4d04663; Fri, 28 Dec 2001 17:13:04 -0800 (PST) Message-Id: <200112290113.fBT1D4d04663@ptavv.es.net> To: Mathew Kanner Cc: James McNaughton , freebsd-questions@FreeBSD.ORG Subject: Re: x11 ssh forwarding 'uses different protocol' In-reply-to: Your message of "Fri, 28 Dec 2001 15:36:43 EST." <20011228153643.A60778@cnd.mcgill.ca> Date: Fri, 28 Dec 2001 17:13:04 -0800 From: "Kevin Oberman" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mat, Have you modified /etc/ssh/sshd_config to allow this? The default changed with OpenSSH and you now need to explicitly un-comment the lines: X11Forwarding yes X11DisplayOffset 10 and "ForwardX11 yes" in ssh_config (or put your own config file in your .ssh directory). R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:18:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f129.law11.hotmail.com [64.4.17.129]) by hub.freebsd.org (Postfix) with ESMTP id AB3EF37B417 for ; Fri, 28 Dec 2001 17:18:26 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 28 Dec 2001 17:18:26 -0800 Received: from 213.1.130.178 by lw11fd.law11.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 01:18:26 GMT X-Originating-IP: [213.1.130.178] From: "S Roberts" To: freebsd-questions@freebsd.org Subject: Re: What exactly does the "ELF" tag mean? Date: Sat, 29 Dec 2001 01:18:26 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 01:18:26.0563 (UTC) FILETIME=[B77BC530:01C19006] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, Simple question, I'm sure. What exactly is this "ELF" tag I keep coming across when reviewing software (eg: MySQL 3.23.47 FreeBSD 4.4 ELF (Intel))designed to run on FreeBSD? Be patient with me, okay? Thanks Regards, S Roberts _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:23:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from midway.uchicago.edu (midway.uchicago.edu [128.135.12.12]) by hub.freebsd.org (Postfix) with ESMTP id 67D5A37B41A for ; Fri, 28 Dec 2001 17:23:28 -0800 (PST) Received: from harper.uchicago.edu (daemon@harper.uchicago.edu [128.135.12.7]) by midway.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT1NRW14414 for ; Fri, 28 Dec 2001 19:23:27 -0600 (CST) Received: from localhost (dsyphers@localhost) by harper.uchicago.edu (8.11.6/8.11.6) with ESMTP id fBT1NRQ24509 for ; Fri, 28 Dec 2001 19:23:27 -0600 (CST) X-Authentication-Warning: harper.uchicago.edu: dsyphers owned process doing -bs Date: Fri, 28 Dec 2001 19:23:27 -0600 (CST) From: David Syphers To: freebsd-questions@freebsd.org Subject: follow up 2: hangs on local package initialization Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG And it turns out the apache problem was just my old friend 'unable to gethostbyname', which should be expected given that I'm using DHCP. It's ironic how I can struggle with these problems for hours by myself, and then minutes after I ask the list I figure it out. Apologies for wasted bandwidth. -David To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:31:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from femail15.sdc1.sfba.home.com (femail15.sdc1.sfba.home.com [24.0.95.142]) by hub.freebsd.org (Postfix) with ESMTP id 6AC9137B41C for ; Fri, 28 Dec 2001 17:31:15 -0800 (PST) Received: from home.com ([24.17.81.37]) by femail15.sdc1.sfba.home.com (InterMail vM.4.01.03.20 201-229-121-120-20010223) with ESMTP id <20011229013114.QURP16985.femail15.sdc1.sfba.home.com@home.com> for ; Fri, 28 Dec 2001 17:31:14 -0800 Message-ID: <3C2D1CEA.3E88D864@home.com> Date: Fri, 28 Dec 2001 20:31:22 -0500 From: Kenneth Beleski Organization: @Home Network X-Mailer: Mozilla 4.61 [en]C-AtHome0407 (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: avery 5389 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG my pre loaded software docent have format for 5389 how do i print recipe cards this size reply to slbeleski@hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:38:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nms2.ggamaur.net (nms2.ggamaur.net [213.160.40.14]) by hub.freebsd.org (Postfix) with ESMTP id D0B8B37B421 for ; Fri, 28 Dec 2001 17:38:24 -0800 (PST) Received: from merlin (c-213-160-32-54.customer.ggaweb.ch [213.160.32.54]) by nms2.ggamaur.net (8.11.3/8.11.3) with SMTP id fBT1cN342769 for ; Sat, 29 Dec 2001 02:38:24 +0100 (CET) (envelope-from mail@maxlor.com) From: "Maxlor" To: Subject: broken resolver Date: Sat, 29 Dec 2001 02:38:19 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey, I'm having some problems resolving DNS records. I'll show you: --------------------------------- root@Atlantis~$ host -d google.com ;; res_nmkquery(QUERY, google.com, IN, A) ;; res_send() ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61479 ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; google.com, type = A, class = IN ;; Querying server (# 1) address = 10.0.0.1 ;; new DG socket ;; got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61479 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 4, ADDITIONAL: 0 ;; google.com, type = A, class = IN google.com. 4m8s IN A 216.239.37.100 google.com. 4m8s IN A 216.239.33.100 google.com. 23h59m8s IN NS ns4.google.com. google.com. 23h59m8s IN NS ns1.google.com. google.com. 23h59m8s IN NS ns2.google.com. google.com. 23h59m8s IN NS ns3.google.com. rcode = 0 (Success), ancount=2 google.com has address 216.239.37.100 google.com has address 216.239.33.100 ;; res_nmkquery(QUERY, google.com, IN, MX) ;; res_send() ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61480 ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; google.com, type = MX, class = IN ;; Querying server (# 1) address = 10.0.0.1 ;; new DG socket ;; timeout ;; Querying server (# 1) address = 10.0.0.1 ;; timeout res_nsend failed root@Atlantis~$ host -dt MX google.com ;; res_nmkquery(QUERY, google.com, IN, MX) ;; res_send() ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24687 ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; google.com, type = MX, class = IN ;; Querying server (# 1) address = 10.0.0.1 ;; new DG socket ;; timeout ;; Querying server (# 1) address = 10.0.0.1 ;; timeout res_nsend failed ;; res_nmkquery(QUERY, google.com.intranet, IN, MX) ;; res_send() ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24688 ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; google.com.intranet, type = MX, class = IN ;; Querying server (# 1) address = 10.0.0.1 ;; new DG socket ;; got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 24688 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; google.com.intranet, type = MX, class = IN intranet. 10M IN SOA Atlantis.intranet. postmaster.maxlor.com. ( 2001092701 ; serial 2W ; refresh 1H ; retry 4W ; expiry 5D ) ; minimum rcode = 3 (Non-existent domain), ancount=0 ;; res_nmkquery(QUERY, google.com, IN, MX) ;; res_send() ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24689 ;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; google.com, type = MX, class = IN ;; Querying server (# 1) address = 10.0.0.1 ;; new DG socket ;; timeout ;; Querying server (# 1) address = 10.0.0.1 ;; timeout res_nsend failed Host not found, try again. --------------------------------- As you can see, the A record resolve fine, but the MX record results in a timeout. This behaviour appears with all domain names. NS records work fine as well, while eg SOA and PTR result in a timeout again. I'm running: root@Atlantis~$ uname -a FreeBSD Atlantis 4.4-STABLE FreeBSD 4.4-STABLE #3: Thu Oct 4 10:59:17 CEST 2001 ben@Atlantis:/usr/src/sys/compile/ATLANTIS i386 To clear up the confusion, the machine Atlantis has two nics, one connects it to the net, one connects it to my intranet. The internal domain name is "Atlantis.intranet", "intranet" is the TLD. I'm running BIND 9.1.3 on this machine. If I use a DNS server on any other machine from atlantis, it does not work. If i use the same other DNS server from another computer on the internet, it works. This leads me to believe that somehom Atlantis' resolver libraries are broken or something like that. Oh yeah, my resolv.conf, if you think it helps: search intranet nameserver 10.0.0.1 Ok. I really hope you can give me a hint here, as the inability to look up MX records is seriously hampering my ability to send mail... Have a lot of fun, Maxlor To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:40:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id C56B837B405 for ; Fri, 28 Dec 2001 17:40:30 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id fBT1eSd10100; Fri, 28 Dec 2001 17:40:29 -0800 (PST) Message-Id: <200112290140.fBT1eSd10100@ptavv.es.net> To: "Jason L. Schwab" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Expected Release Date In-reply-to: Your message of "Fri, 28 Dec 2001 17:37:00 EST." <20011228173616.V56300-100000@citadel.simphost.com> Date: Fri, 28 Dec 2001 17:40:28 -0800 From: "Kevin Oberman" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Date: Fri, 28 Dec 2001 17:37:00 -0500 (EST) > From: "Jason L. Schwab" > Sender: owner-freebsd-questions@FreeBSD.ORG > > Heya Guys/Gals... > > What is the expected release date for > 4.5-RELEASE and when do you all plan > to have 4.5-STABLE rolling out? The official date for 4.5 is 1/20/02. Stable appears at the same time (or maybe a few minutes later when the name change is committed. In reality, releases are simply snapshots of the RELENG_4 branch. A RELEASE tag is created and that is it. From the moment the first commit is made after the RELEASE is tagged, the name will show up as 4.5-STABLE, but it is really continued development on the RELENG_4 branch of FreeBSD. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 17:52:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web21105.mail.yahoo.com (web21105.mail.yahoo.com [216.136.227.107]) by hub.freebsd.org (Postfix) with SMTP id 3ED9437B41A for ; Fri, 28 Dec 2001 17:52:19 -0800 (PST) Message-ID: <20011229015219.33801.qmail@web21105.mail.yahoo.com> Received: from [66.156.108.238] by web21105.mail.yahoo.com via HTTP; Fri, 28 Dec 2001 17:52:19 PST Date: Fri, 28 Dec 2001 17:52:19 -0800 (PST) From: Jon Gable Subject: Changing IPs To: questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just confirming: We are changing ISPs so I'll need to change my FreeBSD machine running Sendmail's IP address. Is the only place I make the ip change located in the hosts file? Thanks Jon __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18: 9:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cliff.mfn.org (cliff.mfn.org [204.238.179.8]) by hub.freebsd.org (Postfix) with ESMTP id D214D37B41A for ; Fri, 28 Dec 2001 18:09:27 -0800 (PST) Received: from greeves.mfn.org (greeves.mfn.org [204.238.179.3]) by cliff.mfn.org (8.11.1/8.9.3) with ESMTP id fBT298I04243; Fri, 28 Dec 2001 20:09:09 -0600 (CST) (envelope-from measl@mfn.org) Date: Fri, 28 Dec 2001 20:09:08 -0600 (CST) From: To: Simon Siemonsma Cc: freebsd-questions@freebsd.org Subject: Re: Disabling KLDs In-Reply-To: <200112282153.WAA12249@smtp.hccnet.nl> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG We use securelevels on all of our FBSD boxes already. A look at the man pages for KLD does not indicate to me that KLDs are disabled by securelevels. If I am misunderstanding what they are saying, I would certainly appreciate a pointer in the right direction :-) Thanks! On Fri, 28 Dec 2001, Simon Siemonsma wrote: > Have a look at kernel securitylevels. > > Simon Siemonsma > > On Friday 28 December 2001 20:31, you wrote: > > Greetings, > > > > In the 3.x days you could specify an "options" statement to disable > > kernel LKM functionality. I have looked in the kernel LINT, and the man > > pages / handbook, and see no equivalent for disabling KLDs. > > > > Is there any "clean" way to do this, or do I need to go through the source > > tree and start cutting? > > > > Please reply directly, as I am not subscribed to "questions". > > > > Thanks! > -- Yours, J.A. Terranson sysadmin@mfn.org If Governments really want us to behave like civilized human beings, they should give serious consideration towards setting a better example: Ruling by force, rather than consensus; the unrestrained application of unjust laws (which the victim-populations were never allowed input on in the first place); the State policy of justice only for the rich and elected; the intentional abuse and occassionally destruction of entire populations merely to distract an already apathetic and numb electorate... This type of demogoguery must surely wipe out the fascist United States as surely as it wiped out the fascist Union of Soviet Socialist Republics. The views expressed here are mine, and NOT those of my employers, associates, or others. Besides, if it *were* the opinion of all of those people, I doubt there would be a problem to bitch about in the first place... -------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:16: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from creme-brulee.marcuscom.com (rdu57-28-046.nc.rr.com [66.57.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 8EF3837B422 for ; Fri, 28 Dec 2001 18:15:48 -0800 (PST) Received: from shumai.marcuscom.com (marcus@shumai.marcuscom.com [192.168.1.4]) by creme-brulee.marcuscom.com (8.11.6/8.11.6) with ESMTP id fBT2FP528725; Fri, 28 Dec 2001 21:15:25 -0500 (EST) (envelope-from marcus@marcuscom.com) Subject: Re: What exactly does the "ELF" tag mean? From: Joe Clarke To: S Roberts Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0 (Preview Release) Date: 28 Dec 2001 21:16:06 -0500 Message-Id: <1009592167.30665.2.camel@shumai.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2001-12-28 at 20:18, S Roberts wrote: > Hello, > Simple question, I'm sure. > > What exactly is this "ELF" tag I keep coming across when reviewing software > (eg: MySQL 3.23.47 FreeBSD 4.4 ELF (Intel))designed to run on FreeBSD? ELF is the application binary format used by FreeBSD >= 3.0 (as well as other OSes). ELF stands for Executable and Linking Format. The previous binary type was a.out. Windows, I believe, uses COFF. Joe > > Be patient with me, okay? Thanks > > Regards, > > S Roberts > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:16:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.mn.rr.com (fe6.rdc-kc.rr.com [24.94.163.53]) by hub.freebsd.org (Postfix) with ESMTP id 49E2737B41B for ; Fri, 28 Dec 2001 18:15:50 -0800 (PST) Received: from [10.0.1.100] ([24.26.174.22]) by mail6.mn.rr.com with Microsoft SMTPSVC(5.5.1877.537.53); Fri, 28 Dec 2001 20:16:05 -0600 Mime-Version: 1.0 X-Sender: josh@mail.bitstream.net Message-Id: Date: Fri, 28 Dec 2001 20:16:02 -0600 To: freebsd-questions@freebsd.org From: Joshua Holland Subject: Weird netstat output Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a FreeBSD server, named jserver. What the heck is all this jserver.syslog stuff that recently appeared: netstat -a: Active Internet connections (including servers) Proto Recv-Q Send-Q Local Address Foreign Address (state) tcp4 0 40 jserver.ssh 1Cust217.tnt1.du.49156 ESTABLISHED tcp4 0 0 jserver.afpovertcp 10.0.1.202.49154 ESTABLISHED tcp4 0 0 *.http *.* LISTEN tcp4 0 0 *.ssh *.* LISTEN tcp46 0 0 *.ssh *.* LISTEN tcp4 0 0 *.afpovertcp *.* LISTEN tcp4 0 0 *.submission *.* LISTEN tcp4 0 0 *.smtp *.* LISTEN tcp4 0 0 *.printer *.* LISTEN tcp6 0 0 *.printer *.* LISTEN tcp4 0 0 *.pop3 *.* LISTEN tcp4 0 0 *.ftp *.* LISTEN udp4 0 0 jserver.2705 jserver.syslog udp4 0 0 jserver.2704 jserver.syslog udp4 0 0 jserver.2703 jserver.syslog udp4 0 0 jserver.2702 jserver.syslog udp4 0 0 jserver.2701 jserver.syslog udp4 0 0 jserver.2659 jserver.syslog udp4 0 0 jserver.2658 jserver.syslog udp4 0 0 jserver.2656 jserver.syslog udp4 0 0 jserver.2645 jserver.syslog udp4 0 0 jserver.2644 jserver.syslog udp4 0 0 jserver.2643 jserver.syslog udp4 0 0 jserver.2605 jserver.syslog udp4 0 0 jserver.2604 jserver.syslog udp4 0 0 jserver.2596 jserver.syslog udp4 0 0 jserver.2592 jserver.syslog udp4 0 0 jserver.2591 jserver.syslog udp4 0 0 jserver.2590 jserver.syslog udp4 0 0 jserver.2552 jserver.syslog udp4 0 0 jserver.2551 jserver.syslog udp4 0 0 jserver.2550 jserver.syslog udp4 0 0 jserver.2549 jserver.syslog udp4 0 0 jserver.2546 jserver.syslog udp4 0 0 jserver.2539 jserver.syslog udp4 0 0 jserver.2501 jserver.syslog udp4 0 0 jserver.2494 jserver.syslog udp4 0 0 jserver.2493 jserver.syslog udp4 0 0 jserver.2482 jserver.syslog udp4 0 0 jserver.2481 jserver.syslog udp4 0 0 jserver.2480 jserver.syslog udp4 0 0 jserver.2425 jserver.syslog udp4 0 0 jserver.2424 jserver.syslog udp4 0 0 jserver.2405 jserver.syslog udp4 0 0 jserver.2404 jserver.syslog udp4 0 0 jserver.2403 jserver.syslog udp4 0 0 jserver.2402 jserver.syslog udp4 0 0 jserver.2364 jserver.syslog udp4 0 0 jserver.2351 jserver.syslog udp4 0 0 jserver.2350 jserver.syslog udp4 0 0 jserver.2343 jserver.syslog udp4 0 0 jserver.2342 jserver.syslog udp4 0 0 jserver.2341 jserver.syslog udp4 0 0 jserver.2299 jserver.syslog udp4 0 0 jserver.2298 jserver.syslog udp4 0 0 jserver.2297 jserver.syslog udp4 0 0 jserver.2291 jserver.syslog udp4 0 0 jserver.2290 jserver.syslog udp4 0 0 jserver.2289 jserver.syslog udp4 0 0 jserver.2231 jserver.syslog udp4 0 0 jserver.2230 jserver.syslog udp4 0 0 jserver.2227 jserver.syslog udp4 0 0 jserver.2226 jserver.syslog udp4 0 0 jserver.2225 jserver.syslog udp4 0 0 jserver.2224 jserver.syslog udp4 0 0 jserver.2167 jserver.syslog udp4 0 0 jserver.2159 jserver.syslog udp4 0 0 jserver.2158 jserver.syslog udp4 0 0 jserver.2157 jserver.syslog udp4 0 0 jserver.2156 jserver.syslog udp4 0 0 jserver.2155 jserver.syslog udp4 0 0 jserver.2105 jserver.syslog udp4 0 0 jserver.2092 jserver.syslog udp4 0 0 jserver.2091 jserver.syslog udp4 0 0 jserver.2090 jserver.syslog udp4 0 0 jserver.2089 jserver.syslog udp4 0 0 jserver.2088 jserver.syslog udp4 0 0 jserver.2050 jserver.syslog udp4 0 0 jserver.2049 jserver.syslog udp4 0 0 jserver.2046 jserver.syslog udp4 0 0 jserver.2043 jserver.syslog udp4 0 0 jserver.2042 jserver.syslog udp4 0 0 jserver.2041 jserver.syslog udp4 0 0 jserver.1992 jserver.syslog udp4 0 0 jserver.1991 jserver.syslog udp4 0 0 jserver.1990 jserver.syslog udp4 0 0 jserver.1989 jserver.syslog udp4 0 0 jserver.1988 jserver.syslog udp4 0 0 jserver.1987 jserver.syslog udp4 0 0 jserver.1939 jserver.syslog udp4 0 0 jserver.1938 jserver.syslog udp4 0 0 jserver.1937 jserver.syslog udp4 0 0 jserver.1936 jserver.syslog udp4 0 0 jserver.1935 jserver.syslog udp4 0 0 jserver.1934 jserver.syslog udp4 0 0 jserver.1884 jserver.syslog udp4 0 0 jserver.1875 jserver.syslog udp4 0 0 jserver.1872 jserver.syslog udp4 0 0 jserver.1871 jserver.syslog udp4 0 0 jserver.1859 jserver.syslog udp4 0 0 jserver.1858 jserver.syslog udp4 0 0 jserver.1822 jserver.syslog udp4 0 0 jserver.1821 jserver.syslog udp4 0 0 jserver.1814 jserver.syslog udp4 0 0 jserver.1807 jserver.syslog udp4 0 0 jserver.1804 jserver.syslog udp4 0 0 jserver.1794 jserver.syslog udp4 0 0 jserver.1758 jserver.syslog udp4 0 0 jserver.1753 jserver.syslog udp4 0 0 jserver.1750 jserver.syslog udp4 0 0 jserver.1749 jserver.syslog udp4 0 0 jserver.1748 jserver.syslog udp4 0 0 jserver.1746 jserver.syslog udp4 0 0 jserver.1708 jserver.syslog udp4 0 0 jserver.1707 jserver.syslog udp4 0 0 jserver.1700 jserver.syslog udp4 0 0 jserver.1693 jserver.syslog udp4 0 0 jserver.1690 jserver.syslog udp4 0 0 jserver.1689 jserver.syslog udp4 0 0 jserver.1651 jserver.syslog udp4 0 0 jserver.1650 jserver.syslog udp4 0 0 jserver.1649 jserver.syslog udp4 0 0 jserver.1648 jserver.syslog udp4 0 0 jserver.1647 jserver.syslog udp4 0 0 jserver.1629 jserver.syslog udp4 0 0 jserver.1585 jserver.syslog udp4 0 0 jserver.1584 jserver.syslog udp4 0 0 jserver.1571 jserver.syslog udp4 0 0 jserver.1570 jserver.syslog udp4 0 0 jserver.1566 jserver.syslog udp4 0 0 jserver.1559 jserver.syslog udp4 0 0 jserver.1505 jserver.syslog udp4 0 0 jserver.1504 jserver.syslog udp4 0 0 jserver.1503 jserver.syslog udp4 0 0 jserver.1496 jserver.syslog udp4 0 0 jserver.1495 jserver.syslog udp4 0 0 jserver.1494 jserver.syslog udp4 0 0 jserver.1433 jserver.syslog udp4 0 0 jserver.1432 jserver.syslog udp4 0 0 jserver.1431 jserver.syslog udp4 0 0 jserver.1430 jserver.syslog udp4 0 0 jserver.1423 jserver.syslog udp4 0 0 jserver.1422 jserver.syslog udp4 0 0 jserver.1377 jserver.syslog udp4 0 0 jserver.1373 jserver.syslog udp4 0 0 jserver.1372 jserver.syslog udp4 0 0 jserver.1343 jserver.syslog udp4 0 0 jserver.1342 jserver.syslog udp4 0 0 jserver.1341 jserver.syslog udp4 0 0 jserver.1303 jserver.syslog udp4 0 0 jserver.1302 jserver.syslog udp4 0 0 jserver.1293 jserver.syslog udp4 0 0 jserver.1286 jserver.syslog udp4 0 0 jserver.1285 jserver.syslog udp4 0 0 jserver.1284 jserver.syslog udp4 0 0 jserver.1236 jserver.syslog udp4 0 0 jserver.1226 jserver.syslog udp4 0 0 jserver.1222 jserver.syslog udp4 0 0 jserver.1221 jserver.syslog udp4 0 0 jserver.1220 jserver.syslog udp4 0 0 jserver.1213 jserver.syslog udp4 0 0 jserver.1174 jserver.syslog udp4 0 0 jserver.1161 jserver.syslog udp4 0 0 jserver.1160 jserver.syslog udp4 0 0 jserver.1159 jserver.syslog udp4 0 0 jserver.1158 jserver.syslog udp4 0 0 jserver.1132 jserver.syslog udp4 0 0 jserver.1094 jserver.syslog udp4 0 0 jserver.1093 jserver.syslog udp4 0 0 jserver.1092 jserver.syslog udp4 0 0 jserver.1085 jserver.syslog udp4 0 0 jserver.1078 jserver.syslog udp4 0 0 jserver.1077 jserver.syslog udp4 0 0 jserver.1039 jserver.syslog udp4 0 0 jserver.1038 jserver.syslog udp4 0 0 jserver.1037 jserver.syslog udp4 0 0 jserver.1030 jserver.syslog To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:28:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from poontang.schulte.org (poontang.schulte.org [209.134.156.197]) by hub.freebsd.org (Postfix) with ESMTP id F13AD37B41F for ; Fri, 28 Dec 2001 18:28:47 -0800 (PST) Received: from tarmap.nospam.schulte.org (tarmap.schulte.org [209.134.156.198]) by poontang.schulte.org (Postfix) with ESMTP id E60AED148C; Fri, 28 Dec 2001 20:28:46 -0600 (CST) Message-Id: <5.1.0.14.0.20011228201932.02d80da0@pop3s.schulte.org> X-Sender: (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 28 Dec 2001 20:28:42 -0600 To: Jon Gable , questions@FreeBSD.org From: Christopher Schulte Subject: Re: Changing IPs In-Reply-To: <20011229015219.33801.qmail@web21105.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 05:52 PM 12/28/2001 -0800, Jon Gable wrote: >Just confirming: > >We are changing ISPs so I'll need to change my FreeBSD >machine running Sendmail's IP address. > >Is the only place I make the ip change located in the >hosts file? No. There will be more places to make changes, but the exact details depend on what services you have running. On one of my machines, I would have to edit: /etc/hosts - you got this one /etc/rc.conf - where ip configuration is usually stored /etc/rc.firewall - my ipfw configuration /etc/named/named.conf - don't forget bind /usr/local/etc/dhcpd.conf - I run a dhcp server here /usr/local/apache/conf/httpd.conf - I run apache /usr/local/ncftpd/conf/domain.cf - ncftpd conf and so on Most basic systems will need to edit at least /etc/hosts and /etc/rc.conf. The rest really depend on your machine. Any service that has a static IP address in its configuration will need to be modified. One idea is to grep your /etc files for the IP address currently assigned. Most (but not necessarily all) changes are in there. >Thanks > >Jon --c To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:38:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smnolde.com (att-98-60-141.atl.mediaone.net [24.98.60.141]) by hub.freebsd.org (Postfix) with ESMTP id BA7E937B41A for ; Fri, 28 Dec 2001 18:38:33 -0800 (PST) Received: from bsd.smnolde.com ([192.168.10.7] helo=bsd ident=smn@smnolde.com) by smnolde.com with esmtp (Exim 3.30 #1) id 16K9OG-000GhY-00; Fri, 28 Dec 2001 21:38:28 -0500 Date: Fri, 28 Dec 2001 21:38:25 -0500 (EST) From: Scott Nolde To: chip Cc: C J Michaels , Joe & Fhe Barbish , FBSD Questions Subject: Re: Block WWW advertizing banners & auto spawn web pages using ipfilter or ipfw In-Reply-To: <200112280628603.SM02384@there> Message-ID: <20011228213403.X96241-100000@bsd.smnolde.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG smacked into the keyboard previously by chip: >On Thursday 27 December 2001 07:38 pm, Scott Nolde wrote: >> smacked into the keyboard previously by C J Michaels: >> >Date: Thu, 27 Dec 2001 22:32:33 -0500 >> >From: C J Michaels >> >To: Scott Nolde , >> > Joe & Fhe Barbish >> >Cc: FBSD Questions >> >Subject: RE: Block WWW advertizing banners & auto spawn web pages using >> > ipfilter or ipfw >> > >> >I use adzap for squid and it works like a charm, it blocks about 80% of >> > ad banners and it does a decent job of squelching popups. It doesn't >> > actually remove them, but the windows pop-up empty and dont' spawn >> > further popups. >> > >> >It's even in the ports collection now (/usr/ports/www/adzap/) >> > >> >--Chris >> >> Thanks for the info. I found a very detailed filter file for junkbuster >> which catches about 98% of the ads from sites in the US. I've been very >> pleased. > >I've been quietly following this thread and am interested in this too. Could >you share with us what filter file it is that you found? Or where you found >it? Google is your friend! http://www.google.com/search?q=junkbuster+blockfile&num=10 I found my filterfile for junkbuster at: http://www.neilvandyke.org/junkbuster-blockfile/ I've added only a few things to it, and it make loading weather.com much less of a pain. I've also just noticed a patch to filter the javascript popups: http://www.tardis.ed.ac.uk/~skx/junk/ - Scott > >Thanks, >Chip >www.wiegand.org > >> I got interested in junkbuster while trying to determine which proxy >> server to use to bypass the office's proxy... OpenSSH + ${proxy_of_choice} >> makes a great combination. Incorporating an ad filter to the web proxy >> cuts down enormously on bandwidth. >> >> >-----Original Message----- >> >Subject: Re: Block WWW advertizing banners & auto spawn web pages using >> >ipfilter or ipfw >> > >> >smacked into the keyboard previously by >owner-freebsd-questions@FreeBSD.ORG: >> > > >> > >Is there a way using firewalls to identify www advertising Banners & >> > > the auto spawning of wed pages so they can be blocked? >> > >> >Junkbuster works like a charm and is easily configurable. If you've got >> > a bunch of users I'd recommend squid for speed. >> > >> >I highly recommend junkbuster for your home/personal use. >> Scott Nolde GPG Key 0xD869AB48 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:51:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pianosa.catch22.org (pianosa.catch22.org [64.81.48.19]) by hub.freebsd.org (Postfix) with ESMTP id 21EB237B405 for ; Fri, 28 Dec 2001 18:51:21 -0800 (PST) Received: by pianosa.catch22.org (Postfix, from userid 1006) id A448F36E; Fri, 28 Dec 2001 18:51:20 -0800 (PST) Date: Fri, 28 Dec 2001 18:51:20 -0800 From: Danny Howard To: questions@freebsd.org Subject: Can't open /dev/dsp: device busy Message-ID: <20011228185120.Y29850@pianosa.catch22.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Loop: djhoward@uiuc.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have REBOOTED, to no avail! Running esd, with the esd mpg123 port ... 0-18:48 dannyman@dell ~> ps auxww | grep esd dannyman 526 0.0 0.5 1060 652 p2 S+ 6:48PM 0:00.01 grep esd dannyman 458 0.0 0.4 624 444 ?? Is 6:45PM 0:00.00 /bin/sh -c esd -terminate -nobeeps -as 2 -spawnfd 5 dannyman 459 0.0 0.6 1208 816 ?? I 6:45PM 0:00.16 esd -terminate -nobeeps -as 2 -spawnfd 5 0-18:46 dannyman@dell ~> which randmp3 randmp3: aliased to find /fun/mp3 -name \*.mp3 -print | mpg123 -z -@ - 0-18:49 dannyman@dell ~> randmp3 High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3. Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp. Uses code from various people. See 'README' for more! THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK! [...] MPEG 1.0 layer III, 64 kbit/s, 44100 Hz joint-stereo /dev/dsp: Device busy audio: Device busy 0-18:48 dannyman@dell ~> pkg_info | grep mpg mpg123-esound-0.59r_4 Command-line player for mpeg layer 1, 2 and 3 audio Hrmmm? Used to work ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:55: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pianosa.catch22.org (pianosa.catch22.org [64.81.48.19]) by hub.freebsd.org (Postfix) with ESMTP id 3805437B429 for ; Fri, 28 Dec 2001 18:54:44 -0800 (PST) Received: by pianosa.catch22.org (Postfix, from userid 1006) id CC53B370; Fri, 28 Dec 2001 18:54:43 -0800 (PST) Date: Fri, 28 Dec 2001 18:54:43 -0800 From: Danny Howard To: questions@freebsd.org Subject: Re: Can't open /dev/dsp: device busy Message-ID: <20011228185443.Z29850@pianosa.catch22.org> References: <20011228185120.Y29850@pianosa.catch22.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228185120.Y29850@pianosa.catch22.org>; from dannyman@toldme.com on Fri, Dec 28, 2001 at 06:51:20PM -0800 X-Loop: djhoward@uiuc.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Oh yeah, and: 1-18:53 dannyman@dell ~> lsof | grep dsp 1-18:53 dannyman@dell ~> lsof | grep audio esd 1582 dannyman txt VREG 116,18 152449 23089 /u/local/lib/libaudiofile.so.0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 18:57:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 8948437B405 for ; Fri, 28 Dec 2001 18:57:33 -0800 (PST) Received: from Tom_Parquette [24.24.29.69] by myrealbox.com with NIMS ModWeb Module; Fri, 28 Dec 2001 21:57:22 -0500 Subject: Re: Re: 3c509 nic, kernel, resulting confusion??? From: Tom Parquette To: printery@blkft.com, Cc: freebsd-questions@FreeBSD.ORG, Date: Fri, 28 Dec 2001 21:57:22 -0500 X-Mailer: NIMS ModWeb Module X-Sender: Tom_Parquette MIME-Version: 1.0 Message-ID: <1009594642.4bfaeff2Tom_Parquette@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Terri, I cannot comment on your 7% loss pinging localhost. That sounds seriously out of whack to me. Re: The 3C509-combo card: Your demesg output looks like the card was at least partially autoconfigure= d to be the second card in the box. (Based on the port at 210. The ethe= rdisk autoconfigure will select 300 if it is the only card.) It's also a combo card based on your demesg output. Your ifconfig -a look= s ok but I have to ask, are you using the RJ-45 interface or one of the o= thers? I have had to manually configure the interface for 10Base-2 befor= e. For some reason, autodetect seems to default to the RJ-45 even if my = 10Base-2 T fitting is plugged in. Suggestions: If this is the only LAN card in your box, get the current Etherdisk from 3C= om's web site (WWW.3com.com) and allow 3c5x9cfg to automatically configur= e the card. If you are using something other than the RJ-45 interface, c= hange the interface specification from autodetect to whatever you are usi= ng. You might want to consider specifying the interface even if autodete= ct appears to be guessing right. If this is not the only LAN card in your box, let 3c5x9cfg try to configure= your card but check for conflicts. When I do this, I have a hardcopy of= demsg to compare the tool's selections against. Again, watch out for the= selection of the physical lan interface plug that it is coming up with. If you have another FreeBSD box on the same wire, I'm assuming you are not = using a switched hub, having a TCPDUMP going at the same time you try to = ping can give you a clue if you are making it out onto the wire. I've had good luck with the 3Com cards at home and at work. They do have t= heir quirks though. Cheers... -----Original Message----- From: "Terry Thomas" To: Date: Fri, 28 Dec 2001 14:17:10 -0800 Subject: Re: 3c509 nic, kernel, resulting confusion??? Correction: It will ping 127.0.0.1 with a 7% loss but ping takes a long tim= e to start, pings to outside or my router come back 'send to: host is down' ----- Original Message ----- From: "printery-blkft" To: Sent: Friday, December 28, 2001 1:53 PM Subject: 3c509 nic, kernel, resulting confusion??? > I'm running 4.4 stable with a 3c509c nic, i've csvuped and went thru > buildworld, etc. with no errors and i've been trying to get it set up for > over a week now and i've not been successful. > I have a 56k frame with 16 ip#'s and a rh box connected to a cisco router > that's up and i'm trying to get my fbsd box hooked via the switch to it too > but it won't even ping 127.0.0.1 > here's what i have set so far, maybe someone can help?? > > in etc/rc.conf i've added... > ifconfig_ep0=3D"inet xxx.xxx.xxx.67" netmask=3D"255.255.255.240" > defaultrouter=3D"xxx.xxx.xxx.65" > > device ep0 isn't in /dev and i've tried to add it with > /dev/MAKEDEV ep0 > but it says device not present > > ifconfig -a gives me... > ep0: flags=3D8843 mtu 1500 > inet xxx.xxx.xxx.67 netmask 0xfffffff0 broadcast xxx.xxx.xxx.79 > inet6 fe80::260:8f:fe20:1cca%ep0 prefixlen 64 scopeid 0x1 > ehter 00:60:08:20:1c:ca > media: Ethernet 10baseT/UTP > > netstat -rn gives me... > 127.0.0.1 127.0.0.1 UH 0 0 lo0 > xxx.xxx.xxx.64/28 link#1 UC 1 0 ep0 > Internet6 has these lines... > fe80::%ep0/64 link#1 UC ep0 > ff02::%ep0/32 link#1 UC ep0 > > dmesg has... > ep0: <3com 3c509-combo etherlink III at port 0x210 irq 11 on isa0 > ep0: > etc/resolv.conf is... > 127.0.0.1 localhost.xxxxx.com localhost > xxx.xxx.xxx.67 ns2.xxxxx.com ns2 > xxx.xxx.xxx.67 ns2.xxxxx.com. > > etc/hosts is... > domain xxxxx.com > nameserver xxx.xxx.xxx.66 (my redhat dns) > nameserver xxx.xxx.xx.3 (my isp nameserver) > > > What am I doing wrong??? or What am I missing? > Needless to say, I'm new at this! I was able to setup ppp with no proble= m > but this ethernet/nic thing has me stumped! > > Thank You, > Terry Thomas > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message Try not. Do or do not. There is no try. -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 19:25:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id E212837B419 for ; Fri, 28 Dec 2001 19:25:42 -0800 (PST) Received: (qmail 2981 invoked from network); 29 Dec 2001 03:25:39 -0000 Received: from dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (216.151.64.67) by smtp3.mx.pitdc1.stargate.net with SMTP; 29 Dec 2001 03:25:39 -0000 Received: from mother.wastegate.net (mother.wg.local [192.168.1.2]) by wastegate.net (Postfix) with SMTP id CAD99482AB for ; Fri, 28 Dec 2001 22:25:35 -0500 (EST) From: "Doug Reynolds" To: "freebsd-questions" Date: Fri, 28 Dec 2001 22:27:03 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: ipfw rules Message-Id: <20011229032535.CAD99482AB@wastegate.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG can someone pick this apart and see if it is ok?? i want to run: httpd sshd ftpd smtp telnet & pop3 i pickup this up off google someplace and changed it a bit # Define the firewall command (as in /etc/rc.firewall) for easy # reference. Helps to make it easier to read. fwcmd="/sbin/ipfw" # Force a flushing of the current rules before we reload. $fwcmd -f flush # Divert all packets through the tunnel interface. $fwcmd add divert natd all from any to any via tun0 # Allow all data from my network card and localhost. Make sure you # change your network card (mine was fxp0) before you reboot. :) $fwcmd add allow ip from any to any via lo0 $fwcmd add allow ip from any to any via xl0 # Allow all connections that I initiate. $fwcmd add allow tcp from any to any out xmit tun0 setup # Once connections are made, allow them to stay open. $fwcmd add allow tcp from any to any via tun0 established # Everyone on the internet is allowed to connect to the following # services on the machine. This example specifically allows connections # to ssh and apache. $fwcmd add allow tcp from any to any 80 setup # httpd $fwcmd add allow tcp from any to any 22 setup # ssh $fwcmd add allow tcp from any to any 21 setup # ftp $fwcmd add allow udp from any to any 21 setup $fwcmd add allow tcp from any to any 20 setup # ftp-data #$fwcmd add allow udp from any to any 20 setup $fwcmd add allow tcp from any to any 25 setup # smtp #$fwcmd add allow udp from any to any 25 setup $fwcmd add allow tcp from any to any 465 setup # ssl smtp #$fwcmd add allow udp from any to any 465 setup $fwcmd add allow tcp from any to any 110 setup # pop3 $fwcmd add allow udp from any to any 110 setup $fwcmd add allow tcp from any to any 23 setup # telnet $fwcmd add allow udp from any to any 23 setup # This sends a RESET to all ident packets. $fwcmd add reset log tcp from any to any 113 in recv tun0 # Allow outgoing DNS queries ONLY to the specified servers. $fwcmd add allow udp from any to any 53 out xmit tun0 # Allow them back in with the answers... :) $fwcmd add allow udp from any 53 to any in recv tun0 # Allow ICMP (for ping and traceroute to work). You may wish to # disallow this, but I feel it suits my needs to keep them in. $fwcmd add 65435 allow icmp from any to any # Deny all the rest. $fwcmd add 65435 deny log ip from any to any --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 19:58:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id E051C37B417 for ; Fri, 28 Dec 2001 19:58:55 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 885CD786E3; Sat, 29 Dec 2001 14:28:48 +1030 (CST) Date: Sat, 29 Dec 2001 14:28:48 +1030 From: Greg Lehey To: Nick Barnes Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD for home security cameras? Message-ID: <20011229142848.C90696@monorchid.lemis.com> References: <70661.1009571206@thrush.ravenbrook.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <70661.1009571206@thrush.ravenbrook.com> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 20:26:46 +0000, Nick Barnes wrote: > My house was burgled just before Christmas. Next time this happens, > it would be satisfying to present the police with pictures of the > villains in the act of carting off our TV in our wheelbarrow, or > ransacking our CD collection. I'm thinking a few cheapo cameras, > inside and out, hooked up to a server in an inaccessible spot > (e.g. the attic) or off-site, after I get a cable modem. I would > prefer FreeBSD on the server. What's the economic way of building a > system like this? Hmm. I don't have an answer for you, but I do have an interest. I have a rather similar project: I want to install an electric gate at the end of my driveway. Mechanically that's not a problem, but the gate is 150 yards from the front door, and I would have to connect a cable to the house since (really!) the longest range wireless remote controls they can supply will do about 60 yards. So I went down there with my laptop and wireless card and established that I still had connection. I'm planning to install some kind of old laptop there, a bit of custom electronics, and a TV camera, and have the gate control connected to the network. If anybody's interested in progress, contact me, and I'll keep you updated; it won't be fast. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 20: 2:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 4853B37B419 for ; Fri, 28 Dec 2001 20:02:44 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 287BB786E7; Sat, 29 Dec 2001 14:32:42 +1030 (CST) Date: Sat, 29 Dec 2001 14:32:42 +1030 From: Greg Lehey To: Joshua Holland Cc: freebsd-questions@freebsd.org Subject: Re: Weird netstat output Message-ID: <20011229143242.D90696@monorchid.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, 28 December 2001 at 20:16:02 -0600, Joshua Holland wrote: > I have a FreeBSD server, named jserver. What the heck is all this > jserver.syslog stuff that recently appeared: > > netstat -a: > > Active Internet connections (including servers) > Proto Recv-Q Send-Q Local Address Foreign Address (state) > udp4 0 0 jserver.2705 jserver.syslog > udp4 0 0 jserver.2704 jserver.syslog > udp4 0 0 jserver.2703 jserver.syslog > udp4 0 0 jserver.2702 jserver.syslog > udp4 0 0 jserver.2701 jserver.syslog > udp4 0 0 jserver.2659 jserver.syslog > udp4 0 0 jserver.2658 jserver.syslog > (etc) Looks like your syslogd has hung itself up. Try restarting it. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21: 6:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id BFE5537B420 for ; Fri, 28 Dec 2001 21:06:42 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBT56YR73561; Sat, 29 Dec 2001 06:06:34 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <024201c19026$9709bf80$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Bob Hall" , "FreeBSD Questions" References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> <01a801c18f9c$a15050b0$0a00000a@atkielski.com> <20011228175531.A575@starpower.net> Subject: Re: Teaching parents UNIX Date: Sat, 29 Dec 2001 06:06:34 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bob writes: > I know people like that also. They ignore the > broken parts and live with slow, fragmented disks > and up to twenty five active viruses on their > systems. The systems still run, but they limp. It works fine for them, even if it doesn't meet your standards of acceptance. > No maintenance means no OS upgrades, no patches, > no defragging, no running software to scan for > or remove viruses or fix system problems, no > editing the registry, no updating virus signatures > (necessary to keep the system virus free), no > remote maintenance via the LAN by the tech > support people, no hardware upgrades, no > reinstalling corrupted drivers or updating drivers, > no updates to shared dlls, no service packs, > no fixing resource conflicts when new software > is installed, no backups, no hard drive checks, > no updating or using repair tools, no updating or > uninstalling apps, and no reconfiguration to > accommodate the user's changing needs. Yes. And most people couldn't care less. The computer does what they want, and none of the above matters in the least to them; they don't even know what any of it means. That may be unthinkable to you, but they are perfectly happy that way. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21:11: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web21105.mail.yahoo.com (web21105.mail.yahoo.com [216.136.227.107]) by hub.freebsd.org (Postfix) with SMTP id 8FCD337B41A for ; Fri, 28 Dec 2001 21:11:01 -0800 (PST) Message-ID: <20011229051101.63655.qmail@web21105.mail.yahoo.com> Received: from [66.156.111.129] by web21105.mail.yahoo.com via HTTP; Fri, 28 Dec 2001 21:11:01 PST Date: Fri, 28 Dec 2001 21:11:01 -0800 (PST) From: Jon Gable Subject: Re: Changing IPs To: Christopher Schulte , questions@FreeBSD.org In-Reply-To: <5.1.0.14.0.20011228201932.02d80da0@pop3s.schulte.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks - This machine is using (Sendmail) Email and and an FTP service. Where in world would I look for the FTP section? Thanks Again - Jon --- Christopher Schulte wrote: > At 05:52 PM 12/28/2001 -0800, Jon Gable wrote: > >Just confirming: > > > >We are changing ISPs so I'll need to change my > FreeBSD > >machine running Sendmail's IP address. > > > >Is the only place I make the ip change located in > the > >hosts file? > > No. There will be more places to make changes, but > the exact details > depend on what services you have running. > > On one of my machines, I would have to edit: > > /etc/hosts - you got this one > /etc/rc.conf - where ip configuration is usually > stored > /etc/rc.firewall - my ipfw configuration > /etc/named/named.conf - don't forget bind > /usr/local/etc/dhcpd.conf - I run a dhcp server here > /usr/local/apache/conf/httpd.conf - I run apache > /usr/local/ncftpd/conf/domain.cf - ncftpd conf > and so on > > Most basic systems will need to edit at least > /etc/hosts and > /etc/rc.conf. The rest really depend on your > machine. Any service that > has a static IP address in its configuration will > need to be modified. > > One idea is to grep your /etc files for the IP > address currently > assigned. Most (but not necessarily all) changes > are in there. > > >Thanks > > > >Jon > > --c > > __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21:31:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swiftsure.cnchost.com (swiftsure.concentric.net [207.155.252.8]) by hub.freebsd.org (Postfix) with ESMTP id 9E0C137B421 for ; Fri, 28 Dec 2001 21:31:24 -0800 (PST) Received: (root@localhost) by swiftsure.cnchost.com id AAA09011; Sat, 29 Dec 2001 00:31:22 -0500 (EST) [ConcentricHost SMTP Relay 1.14] Message-ID: <200112290531.AAA09011@swiftsure.cnchost.com> From: Chaz To: "questions@FreeBSD.org" Subject: Port 27960 Date: Fri, 28 Dec 2001 21:31:22 -0800 (PST) In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi thanks for you time i just got my quake 3 server running but im having a small problem it's not using the default port 27960 it then trys to use the port 27961 and that's being used by some thing as well so any ways it get's to port 27964 and works fine here is the main problem i have to run the server on port 27960 cuz if not it will not show up in the lan arrea i guess it look cans the local network for computers running port 27960 PLEASE HELP To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21:47:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cepheus.azstarnet.com (cepheus.azstarnet.com [169.197.56.195]) by hub.freebsd.org (Postfix) with ESMTP id E079237B425 for ; Fri, 28 Dec 2001 21:47:42 -0800 (PST) Received: from dhcp70.mc01.dsl.fastucson.net (dhcp70.mc01.dsl.fastucson.net [169.197.8.70]) by cepheus.azstarnet.com (8.9.3/8.9.3) with ESMTP id WAA00839 for ; Fri, 28 Dec 2001 22:47:40 -0700 (MST) X-Sent-via: StarNet http://www.azstarnet.com/ Date: Fri, 28 Dec 2001 23:01:34 -0700 (MST) From: Jeffrey X-X-Sender: jeffrey@zx750.ninja.com To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX In-Reply-To: <024201c19026$9709bf80$0a00000a@atkielski.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Bob writes: > > I know people like that also. They ignore the > > broken parts and live with slow, fragmented disks > > and up to twenty five active viruses on their > > systems. The systems still run, but they limp. >Anthony replied: > It works fine for them, even if it doesn't meet your standards of > acceptance. > Unfortunately in today's computing environment allowing viruses (or worms) to run rampant on your computer does affect me. A quick look at a set of web logs on a public web server will quickly show you this. (Code Red, Nimda) So while I really don't care if a person defragments their disk, repairs broken software, uninstalls old software or even updates their drivers. I do care that they are not maintaining their machine to at least the point that they are not attacking one of my servers. Thanks, Jeffrey To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21:48:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp6.mindspring.com (smtp6.mindspring.com [207.69.200.110]) by hub.freebsd.org (Postfix) with ESMTP id 2036837B419 for ; Fri, 28 Dec 2001 21:48:05 -0800 (PST) Received: from pool-63.49.82.88.tmpa.grid.net ([63.49.82.88] helo=ASGARD) by smtp6.mindspring.com with smtp (Exim 3.33 #1) id 16KCLf-0003pX-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 00:48:00 -0500 Message-ID: <011001c1902c$08a0c800$6400a8c0@dominion.us> From: "Ciro Maietta" To: References: <006201c1815e$a3f16620$6d36120a@comsys.ntukpi.kiev.ua> Subject: APM on an Intel 810 chipset (was: Enabling APM) Date: Sat, 29 Dec 2001 00:45:32 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am having EXACTLY the same problem. valhalla# apm apm: can't open /dev/apm: Device not configured valhalla# I have (I think) enabled apm0 in kernel. I say "I think" because I have DEFINITELY added 'device apm0' to the kernel, but I get no message of APM in the startup. One of the users on IRC suggested that I might need to add some options to the "Device" line, but the ones in GENERIC dont cut it. I'm using a Compaq 5724 factory loaded, except for 192 ram upgrade. The chipset is an Intel 810. If anyone has ANY input, that would be great. TIA Ciro ----- Original Message ----- From: "Andrey Simonenko" To: "Daniel Kim" Cc: Sent: Monday,10 December, 2001 04.40 Subject: Re: Enabling APM > > ----- Original Message ----- > From: Daniel Kim > Newsgroups: lucky.freebsd.questions > Sent: Monday, December 10, 2001 8:40 AM > Subject: Enabling APM > > > > What else do I need to do in order to enable APM? Basically all I want > > to do is have my screen go blank after x amount of time. > > > > You should also enable APM in the kernel. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 21:58:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta03bw.bigpond.com (mta03bw.bigpond.com [139.134.6.86]) by hub.freebsd.org (Postfix) with ESMTP id F3EB437B423 for ; Fri, 28 Dec 2001 21:56:48 -0800 (PST) Received: from wskatinka ([144.135.24.87]) by mta03bw.bigpond.com (Netscape Messaging Server 4.15) with SMTP id GP3CU600.38N for ; Sat, 29 Dec 2001 16:03:42 +1000 Received: from CPE-144-137-224-139.wa.bigpond.net.au ([144.137.224.139]) by bwmam07.mailsvc.email.bigpond.com(MailRouter V3.0h 56/2651767); 29 Dec 2001 15:56:45 Message-ID: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> From: "Kathy Quinlan" To: References: Subject: Re: Teaching parents UNIX Date: Sat, 29 Dec 2001 14:02:29 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Jeffrey" > So while I really don't care if a person defragments their disk, repairs > broken software, uninstalls old software or even updates their drivers. I > do care that they are not maintaining their machine to at least the point > that they are not attacking one of my servers. Thi sis one of my pet gripes, I think that AV software should be free, as it is fine and dandy for the people with the money to buy it and protect their system, but the people who can not afford it, unknowingly get infected and spread it to the rest of the world, so what some ppl say, I would rather have an AV software that has one hit per day than the current 30 hits I am experiencing, and most of the viri are coming from ppl who either can not afford the fees to get the defs or do not know how to...... Maybe we should insist ppl pass a basic computer course before going on the internet ? ;o) Regards, Kat. ____________________________________________________________________________ /"\ ASCII Ribbon Campaign | K.A.Q. Electronics \ / - NO HTML/RTF in e-mail | Software and Electronic Engineering X - NO Word docs in e-mail | Perth Western Australia / \ | Ph +61 419 923 731 ____________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 22:19:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cymose.closequarters.com (washdc3-ar6-4-61-055-177.vz.dsl.gtei.net [4.61.55.177]) by hub.freebsd.org (Postfix) with ESMTP id B77E937B421 for ; Fri, 28 Dec 2001 22:19:15 -0800 (PST) Received: by cymose.closequarters.com (Postfix, from userid 4242) id B170928; Sat, 29 Dec 2001 01:17:06 -0500 (EST) Date: Sat, 29 Dec 2001 01:17:06 -0500 From: Brandon Menc To: freebsd-questions@freebsd.org Subject: install kernel with 3c589 support Message-ID: <20011229011706.A4325@.vz.dsl.genuity.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I want to install FreeBSD over ethernet. Support for 3Com's 3c589 (pcmcia) is not supported in the install kernel. I have not been able to locate a precompiled kernel that supports this (preferred). I have also had little success trying to build a FreeBSD kernel on my NetBSD box (expected). I expect that I can just take a new kernel, gzip it, and replace "kernel.gz" on the boot floppy with the said new kernel. Is this possible? Has anyone else solved this problem? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 22:30:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.prod.itd.earthlink.net (scaup.mail.pas.earthlink.net [207.217.120.49]) by hub.freebsd.org (Postfix) with ESMTP id 7D84137B41F for ; Fri, 28 Dec 2001 22:30:28 -0800 (PST) Received: from dialup-209.245.140.30.dial1.sanjose1.level3.net ([209.245.140.30] helo=blossom.cjclark.org) by scaup.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KD0h-0001Qe-00; Fri, 28 Dec 2001 22:30:23 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBT6UDG95536; Fri, 28 Dec 2001 22:30:13 -0800 (PST) (envelope-from cjc) Date: Fri, 28 Dec 2001 22:30:12 -0800 From: "Crist J . Clark" To: measl@mfn.org Cc: Simon Siemonsma , freebsd-questions@FreeBSD.ORG Subject: Re: Disabling KLDs Message-ID: <20011228223012.E93411@blossom.cjclark.org> References: <200112282153.WAA12249@smtp.hccnet.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from measl@mfn.org on Fri, Dec 28, 2001 at 08:09:08PM -0600 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 08:09:08PM -0600, measl@mfn.org wrote: > > We use securelevels on all of our FBSD boxes already. A look at the man > pages for KLD does not indicate to me that KLDs are disabled by > securelevels. If I am misunderstanding what they are saying, I would > certainly appreciate a pointer in the right direction :-) $ man securelevel ... 1 Secure mode - the system immutable and system append-only flags may not be turned off; disks for mounted filesystems, /dev/mem, and /dev/kmem may not be opened for writing; kernel modules (see kld(4)) may not be loaded or unloaded. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Dec 28 23:22:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f54.law9.hotmail.com [64.4.9.54]) by hub.freebsd.org (Postfix) with ESMTP id 85A6F37B41A for ; Fri, 28 Dec 2001 23:22:15 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 28 Dec 2001 23:22:15 -0800 Received: from 65.30.229.190 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 07:22:15 GMT X-Originating-IP: [65.30.229.190] From: "Joe Parks" To: freebsd-questions@freebsd.org Subject: will dump / restore work on directories rather than filesystems ? Date: Sat, 29 Dec 2001 00:22:15 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 07:22:15.0380 (UTC) FILETIME=[8A78E940:01C19039] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have been successfully using dump / restore - first I do a dump of a _filesystem_ with a command like this: dump -0a -f /my-dump /dev/da0s1a (make a dump of / filesystem) And then I restore it with: restore -x -f /my-dump (while my pwd is where I want to extract it) So far so good. --------------- But now, I would like to dump only a subset of the files on a filesystem. That is, I want to dump, and only dump a specific directory structure. I tried this three ways - with the dir structure in mind as my pwd, I tried a '.', the full path without a trailing slash, and finally the full path with a trailing slash. Here are the results: server# dump -0a -f /my-dump . DUMP: Date of this level 0 dump: Wed Dec 26 08:50:58 2001 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping . to /my-dump DUMP: bad sblock magic number DUMP: The ENTIRE dump is aborted. server# dump -0a -f /my-dump /full/path DUMP: Date of this level 0 dump: Wed Dec 26 08:51:22 2001 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /full/path to /my-dump DUMP: bad sblock magic number DUMP: The ENTIRE dump is aborted. server# dump -0a -f /my-dump /full/path/ DUMP: Date of this level 0 dump: Wed Dec 26 08:51:24 2001 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /full/path/ to /my-dump DUMP: bad sblock magic number DUMP: The ENTIRE dump is aborted. As can be seen, it did not work. So the question is, how can I `dump` a subset of an entire filesystem, and not the entire filesystem itself ? I am against using `tar` for this, since the subset in mind has special files in it (/dev - like files), etc., and I have read carefully the comments of freebsd-core members who have said, in the past: "use dump or you will lose". Your comments/help appreciated. _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0: 8: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fedde.littleton.co.us (cfedde.dsl.frii.net [216.17.139.141]) by hub.freebsd.org (Postfix) with ESMTP id A11AC37B423 for ; Sat, 29 Dec 2001 00:08:00 -0800 (PST) Received: from fedde.littleton.co.us (localhost [127.0.0.1]) by fedde.littleton.co.us (8.11.6/8.11.4) with ESMTP id fBT87ox00793; Sat, 29 Dec 2001 01:07:51 -0700 (MST) Message-Id: <200112290807.fBT87ox00793@fedde.littleton.co.us> To: "Joe Parks" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: will dump / restore work on directories rather than filesystems ? In-Reply-To: From: Chris Fedde Date: Sat, 29 Dec 2001 01:07:50 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001 00:22:15 -0700 "Joe Parks" wrote: +------------------ | So the question is, how can I `dump` a subset of an entire filesystem, and | not the entire filesystem itself ? I am against using `tar` for this, since | the subset in mind has special files in it (/dev - like files), etc., and I | have read carefully the comments of freebsd-core members who have said, in | the past: "use dump or you will lose". +------------------ One way to do this is with a combination of find(1), touch(1), the dump level option to dump(8) and a doctored dumpdates file. Good Luck -- Chris Fedde To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:12:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f222.law9.hotmail.com [64.4.9.222]) by hub.freebsd.org (Postfix) with ESMTP id 1BFD537B436 for ; Sat, 29 Dec 2001 00:12:43 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 29 Dec 2001 00:12:42 -0800 Received: from 65.30.229.190 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 08:12:42 GMT X-Originating-IP: [65.30.229.190] From: "Joe Parks" To: chris@fedde.littleton.co.us Cc: freebsd-questions@FreeBSD.ORG Subject: Re: will dump / restore work on directories rather than filesystems ? Date: Sat, 29 Dec 2001 01:12:42 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 08:12:42.0991 (UTC) FILETIME=[9711AFF0:01C19040] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG So that is as elegant as it gets - there is no built in functionality for what I am describing (that is, it isn't designed to do that ?) thanks. > >One way to do this is with a combination of find(1), touch(1), the >dump level option to dump(8) and a doctored dumpdates file. > >Good Luck > >-- > Chris Fedde _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:35:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp3.mx.pitdc1.stargate.net (smtp3.mx.pitdc1.stargate.net [206.210.69.143]) by hub.freebsd.org (Postfix) with SMTP id D3EB437B41F for ; Sat, 29 Dec 2001 00:35:14 -0800 (PST) Received: (qmail 13546 invoked from network); 29 Dec 2001 08:35:12 -0000 Received: from dap-216-151-64-67.nfas.greensburg-tnt-2.sns234.pa.stargate.net (HELO wastegate.net) (216.151.64.67) by smtp3.mx.pitdc1.stargate.net with SMTP; 29 Dec 2001 08:35:12 -0000 Received: from mother.wastegate.net (mother.wg.local [192.168.1.2]) by wastegate.net (Postfix) with SMTP id 7392C482D6; Sat, 29 Dec 2001 03:35:07 -0500 (EST) From: "Doug Reynolds" To: "Brandon Menc" , "freebsd-questions@freebsd.org" Date: Sat, 29 Dec 2001 03:36:34 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2380) For Windows 98 (4.10.2222) In-Reply-To: <20011229011706.A4325@.vz.dsl.genuity.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: install kernel with 3c589 support Message-Id: <20011229083507.7392C482D6@wastegate.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001 01:17:06 -0500, Brandon Menc wrote: >I want to install FreeBSD over ethernet. Support for 3Com's 3c589 (pcmcia) is >not supported in the install kernel. I have not been able to locate a >precompiled kernel that supports this (preferred). I have also had little >success trying to build a FreeBSD kernel on my NetBSD box (expected). I >expect that I can just take a new kernel, gzip it, and replace "kernel.gz" >on the boot floppy with the said new kernel. Is this possible? Has anyone >else solved this problem? did you try going into the visual configuration b4 you booted the install disk? if you go there you might be able to configure it to work. or you could use a parallel cable and a plip connection to your netbsd box and mount the install cd there. --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:36:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.mail.pas.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 36FEC37B423 for ; Sat, 29 Dec 2001 00:36:51 -0800 (PST) Received: from dialup-209.245.140.30.dial1.sanjose1.level3.net ([209.245.140.30] helo=blossom.cjclark.org) by albatross.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KEyu-0007LW-00; Sat, 29 Dec 2001 00:36:46 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBT8aDF96020; Sat, 29 Dec 2001 00:36:13 -0800 (PST) (envelope-from cjc) Date: Sat, 29 Dec 2001 00:36:10 -0800 From: "Crist J . Clark" To: Joe Parks Cc: chris@fedde.littleton.co.us, freebsd-questions@FreeBSD.ORG Subject: Re: will dump / restore work on directories rather than filesystems ? Message-ID: <20011229003610.F93411@blossom.cjclark.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from pleaseworky@hotmail.com on Sat, Dec 29, 2001 at 01:12:42AM -0700 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 01:12:42AM -0700, Joe Parks wrote: > > So that is as elegant as it gets - there is no built in functionality for > what I am describing (that is, it isn't designed to do that ?) No. dump(1) works on whole filesystems. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:45:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mel-rto1.wanadoo.fr (smtp-out-1.wanadoo.fr [193.252.19.188]) by hub.freebsd.org (Postfix) with ESMTP id 574B937B419; Sat, 29 Dec 2001 00:45:35 -0800 (PST) Received: from amyris.wanadoo.fr (193.252.19.150) by mel-rto1.wanadoo.fr; 29 Dec 2001 09:45:34 +0100 Received: from merry-xmastoall (193.252.40.2) by amyris.wanadoo.fr; 29 Dec 2001 09:45:22 +0100 Message-ID: <3c2d82ae3cb53f4e@amyris.wanadoo.fr> (added by amyris.wanadoo.fr) From: loseweight20012000@yahoo.com To: Subject: ULTIMATE WEIGHT LOSS PRODUCT !!! Date: Sat, 29 Dec 2001 00:44:48 -0600 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_22C5_000053D7.00000DEF" X-Priority: 3 X-MSMail-Priority: Normal Reply-To: loseweight20012000@yahoo.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ------=_NextPart_000_22C5_000053D7.00000DEF Content-Type: text/html; No Way?

No Way? Yes Whey!
Introducing Our Whey of Life to A 
$50,000 - $100,000 A Year Income!
Maximize Your Lean To Fat Ratio With the Real Food Lean Maximizer Weight Loss System
  • Cut Your Grocery Bill In Half 
  • Experience Weight Loss That Stays Off. 
  • Increase Fat Loss, Increase Lean Muscle, Increase Metabolism, Increase Endurance and Strength Gain (Documented Up To 430%). 
  • Reduces Food Craving, Promotes Normal Blood Sugar Levels and Helps Support Immune System and Increases Cell Hydration. 
  • Our Products Are Safe, Effective and 100% GUARANTEED! 

Learn How our products are effective 
  • Earn Up To 42% Fast Start Commissions 
  • Earn Residual Income From 5x5 Expandable Matrix With 100% Matching Bonuses On Your Personally Sponsored. 

If you'd like to learn more about our products Call 1-800-891-4074 
Are you interested in building extra residual income? Contact us NOW!

Email us your Name, Phone Number,& Best Time to Call. Someone will call you in 24hrs. Thanks

mailto:lose30lbs2002@yahoo.com-Subject=moreinfo

 


Please discontinue advertising to me..mailto:kdsfdfss@yahoo.com?subject=Remove
To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:50:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f150.law9.hotmail.com [64.4.9.150]) by hub.freebsd.org (Postfix) with ESMTP id C0CF037B41F for ; Sat, 29 Dec 2001 00:50:24 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 29 Dec 2001 00:50:24 -0800 Received: from 65.30.229.190 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 08:50:24 GMT X-Originating-IP: [65.30.229.190] From: "Joe Parks" To: mav@wastegate.net, brm4242@fastmail.fm, freebsd-questions@freebsd.org Subject: Re: install kernel with 3c589 support Date: Sat, 29 Dec 2001 01:50:24 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 08:50:24.0728 (UTC) FILETIME=[DB2B5D80:01C19045] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, 3c589 is in the kernel, and it works fine. Perhaps you need to go into full screen kernel configuration mode after booting the install floppies and _disable_ all the existing network drivers. Just because you do not see 3c589 in this list does not mean it isn't there...disable all in the list there and Q to quit, and it should work. >From: "Doug Reynolds" >Reply-To: "Doug Reynolds" >To: "Brandon Menc" , "freebsd-questions@freebsd.org" > >Subject: Re: install kernel with 3c589 support >Date: Sat, 29 Dec 2001 03:36:34 -0500 > >On Sat, 29 Dec 2001 01:17:06 -0500, Brandon Menc wrote: > > >I want to install FreeBSD over ethernet. Support for 3Com's 3c589 >(pcmcia) is > >not supported in the install kernel. I have not been able to locate a > >precompiled kernel that supports this (preferred). I have also had little > >success trying to build a FreeBSD kernel on my NetBSD box (expected). I > >expect that I can just take a new kernel, gzip it, and replace >"kernel.gz" > >on the boot floppy with the said new kernel. Is this possible? Has anyone > >else solved this problem? > >did you try going into the visual configuration b4 you booted the >install disk? if you go there you might be able to configure it to >work. or you could use a parallel cable and a plip connection to your >netbsd box and mount the install cd there. > >--- >doug reynolds | the maverick | mav@wastegate.net > >PGP Public Key Fingerprint: 6E7B 9993 B503 6D45 E33A 2019 26E5 C1DB > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 0:52: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f112.law9.hotmail.com [64.4.9.112]) by hub.freebsd.org (Postfix) with ESMTP id 7815737B419; Sat, 29 Dec 2001 00:52:02 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 29 Dec 2001 00:52:02 -0800 Received: from 65.30.229.190 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 08:52:02 GMT X-Originating-IP: [65.30.229.190] From: "Joe Parks" To: cjc@FreeBSD.ORG Cc: chris@fedde.littleton.co.us, freebsd-questions@FreeBSD.ORG Subject: Re: will dump / restore work on directories rather than filesystems ? Date: Sat, 29 Dec 2001 01:52:02 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 08:52:02.0315 (UTC) FILETIME=[1555F5B0:01C19046] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Any suggestions on how to accomplish this without big ugly hacks involving find and altering file dates and such ? I am just afraid to use tar, since /dev - like special files are involved, etc...and it has been made clear time and time again that dump is all that you can use... thanks! > >On Sat, Dec 29, 2001 at 01:12:42AM -0700, Joe Parks wrote: > > > > So that is as elegant as it gets - there is no built in functionality >for > > what I am describing (that is, it isn't designed to do that ?) > >No. dump(1) works on whole filesystems. >-- >"It's always funny until someone gets hurt. Then it's hilarious." > >Crist J. Clark | cjclark@alum.mit.edu > | cjclark@jhu.edu >http://people.freebsd.org/~cjc/ | cjc@freebsd.org _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1: 9:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta6.snfc21.pbi.net (mta6.snfc21.pbi.net [206.13.28.240]) by hub.freebsd.org (Postfix) with ESMTP id 6094D37B422 for ; Sat, 29 Dec 2001 01:09:37 -0800 (PST) Received: from blackbox.pacbell.net ([64.166.84.241]) by mta6.snfc21.pbi.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with ESMTP id <0GP300MYQLG03J@mta6.snfc21.pbi.net> for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 01:09:37 -0800 (PST) Received: (from mikem@localhost) by blackbox.pacbell.net (8.11.6/8.11.6) id fBT9LOb59430; Sat, 29 Dec 2001 01:21:24 -0800 (PST envelope-from mikem) Date: Sat, 29 Dec 2001 01:21:24 -0800 From: Mike Makonnen Subject: Re: will dump / restore work on directories rather than filesystems ? In-reply-to: To: Joe Parks Cc: freebsd-questions@freebsd.org Message-id: <200112290921.fBT9LOb59430@blackbox.pacbell.net> MIME-version: 1.0 X-Mailer: Sylpheed version 0.6.5 (GTK+ 1.2.10; i386--freebsd4.4) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT References: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If I'm not mistaken dump only works on an entire filesystem (hence, the bad sblock magic number error). The only way to get a specific directory using dump is to set the nodump flag for all the directories except the one you want. This assumes that the directory you want is a top level directory on the partition or slice you want to dump. If it is a subdirectory of a top level directory you cant't set the nodump on the directory tree directly above it, which means you would dump the specific directory you want plus all the directories it is a subdirectory of. Cheers, mikem On Sat, 29 Dec 2001 00:22:15 -0700 "Joe Parks" wrote: > But now, I would like to dump only a subset of the files on a filesystem. > That is, I want to dump, and only dump a specific directory structure. > > I tried this three ways - with the dir structure in mind as my pwd, I tried > a '.', the full path without a trailing slash, and finally the full path > with a trailing slash. Here are the results: > > server# dump -0a -f /my-dump . > DUMP: Date of this level 0 dump: Wed Dec 26 08:50:58 2001 > DUMP: Date of last level 0 dump: the epoch > DUMP: Dumping . to /my-dump > DUMP: bad sblock magic number > DUMP: The ENTIRE dump is aborted. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:18:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mx1.au.itouchnet.net (e0-apn-fw1.au.itouchnet.net [203.42.71.10]) by hub.freebsd.org (Postfix) with ESMTP id 74B8637B637 for ; Sat, 29 Dec 2001 01:18:05 -0800 (PST) Received: from nobody by mx1.au.itouchnet.net with scanned_ok (Exim 3.33 #18) id 16KFvs-000CvK-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 20:37:36 +1100 Received: from cpe-144-137-121-42.nsw.bigpond.net.au ([144.137.121.42] helo=[192.168.2.35]) by mx1.au.itouchnet.net with esmtp (Exim 3.33 #18) id 16KFvq-000Cug-00; Sat, 29 Dec 2001 20:37:34 +1100 Subject: Re: will dump / restore work on directories rather than filesystems ? From: Andrew Thomson To: Joe Parks Cc: cjc@FreeBSD.ORG, chris@fedde.littleton.co.us, freebsd-questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.0.99+cvs.2001.12.12.08.57 (Preview Release) Date: 29 Dec 2001 20:08:19 +1100 Message-Id: <1009616930.692.1.camel@oblivion.whitefox.com.au> Mime-Version: 1.0 X-Checked: This message has been scanned for any virusses and unauthorized attachments. X-iScan: Version $Id: iScan,v 1.31 2001/01/18 09:25:45 rip Exp $ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At last check, dump also has a nodump flag option. Actually, check out the -h in man dump. See also man chflags on how to set this flag. I was using this at one point to do a similar thing. Anyway, perhaps this is another option!!?? ;) Regards, A On Sat, 2001-12-29 at 19:52, Joe Parks wrote: > > Any suggestions on how to accomplish this without big ugly hacks involving > find and altering file dates and such ? I am just afraid to use tar, since > /dev - like special files are involved, etc...and it has been made clear > time and time again that dump is all that you can use... > > thanks! > > > > > >On Sat, Dec 29, 2001 at 01:12:42AM -0700, Joe Parks wrote: > > > > > > So that is as elegant as it gets - there is no built in functionality > >for > > > what I am describing (that is, it isn't designed to do that ?) > > > >No. dump(1) works on whole filesystems. > >-- > >"It's always funny until someone gets hurt. Then it's hilarious." > > > >Crist J. Clark | cjclark@alum.mit.edu > > | cjclark@jhu.edu > >http://people.freebsd.org/~cjc/ | cjc@freebsd.org > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:28:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bob.samurai.com (bob.samurai.com [205.207.28.75]) by hub.freebsd.org (Postfix) with ESMTP id 5FA3A37B405 for ; Sat, 29 Dec 2001 01:28:30 -0800 (PST) Received: from magus (CPE0080C8F30B1D.cpe.net.cable.rogers.com [24.156.229.139]) by bob.samurai.com (Postfix) with ESMTP id 1EE221DC4; Sat, 29 Dec 2001 04:28:29 -0500 (EST) Message-ID: <002201c1904b$2c875c60$0300a8c0@anime.ca> From: "William Wong" To: "Hassan Halta" , "Jonathan Chen" Cc: References: <20011228162605.U52755-100000@quark.cs.earlham.edu> Subject: Re: postgres support for PHP under FreeBSD Date: Sat, 29 Dec 2001 04:28:27 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It works fine for me too. When you build PHP with ports (or without), you need to specify that you also want to compile in Postgres support. By default only zlib and mysql are installed. - Will ----- Original Message ----- From: "Hassan Halta" To: "Jonathan Chen" Cc: Sent: Friday, December 28, 2001 4:26 PM Subject: Re: postgres support for PHP under FreeBSD > Yes indeed, do you think building it without the port selections will > help? I will try that out. > > Thanks, > Hassan > > > On Sat, 29 Dec 2001, Jonathan Chen wrote: > > > Date: Sat, 29 Dec 2001 10:19:51 +1300 > > From: Jonathan Chen > > To: Hassan Halta > > Cc: freebsd-questions@FreeBSD.ORG > > Subject: Re: postgres support for PHP under FreeBSD > > > > On Fri, Dec 28, 2001 at 04:07:33PM -0500, Hassan Halta wrote: > > > Hi all, > > > > > > I hope this is the correct list to send this messge to. > > > > > > It seems that there is a bug in PHP 4 under FreeBSD supporting Postgres > > > calls. However, it's compiled just fine, but when you run the code, you > > > get the message for undefined functions. However, if you run the code > > > under a linux box, the code runs just fine. I noticed this in FreeBSD 4.2 > > > and 4.3 as well. > > > > Works fine for me. Did you build it using the ports system? > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:30:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 88C5337B423 for ; Sat, 29 Dec 2001 01:30:14 -0800 (PST) Received: from dialup-209.245.140.30.dial1.sanjose1.level3.net ([209.245.140.30] helo=blossom.cjclark.org) by snipe.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KFoY-0002TT-00; Sat, 29 Dec 2001 01:30:08 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBT9TKU96175; Sat, 29 Dec 2001 01:29:20 -0800 (PST) (envelope-from cjc) Date: Sat, 29 Dec 2001 01:29:18 -0800 From: "Crist J . Clark" To: Joe Parks Cc: chris@fedde.littleton.co.us, freebsd-questions@FreeBSD.ORG Subject: Re: will dump / restore work on directories rather than filesystems ? Message-ID: <20011229012918.G93411@blossom.cjclark.org> Reply-To: cjclark@alum.mit.edu References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from pleaseworky@hotmail.com on Sat, Dec 29, 2001 at 01:52:02AM -0700 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 01:52:02AM -0700, Joe Parks wrote: > > Any suggestions on how to accomplish this without big ugly hacks involving > find and altering file dates and such ? I am just afraid to use tar, since > /dev - like special files are involved, etc...and it has been made clear > time and time again that dump is all that you can use... No, I'd just dump the whole filesystem. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:34:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.retemail.es (smtp05.iddeo.es [62.81.186.15]) by hub.freebsd.org (Postfix) with ESMTP id D674937B41E for ; Sat, 29 Dec 2001 01:34:43 -0800 (PST) Received: from conway.localdomain ([62.174.72.236]) by smtp05.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id <20011229093443.ZTHS25555.smtp05.retemail.es@conway.localdomain> for ; Sat, 29 Dec 2001 10:34:43 +0100 Date: Sat, 29 Dec 2001 10:33:30 +0100 From: F.Xavier Noria To: freebsd-questions@freebsd.org Subject: Error from sendmail Message-Id: <20011229103330.28c661b2.fxn@isoco.com> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've found a console filled with messages like this one: Dec 29 10:21:08 conway sendamil[7618]: fTB9JlK07618: rule_set=check_mail, arg_1 = , relay = localhost [127.0.0.1], reject=451 4.1.8 Domain of sender address biz@6x6.net does not resolve I don't know who is biz@6x6.net and mailq says it has nothing in the queue. Sendmail has no customized configuration, just defaults as they come when you install it from the FreeBSD installation program... do you know what is happenning? -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:45:49 2001 Delivered-To: freebsd-questions@freebsd.org Received: from berbee.com (berbee.com [205.173.176.16]) by hub.freebsd.org (Postfix) with ESMTP id DAC1E37B41A for ; Sat, 29 Dec 2001 01:45:46 -0800 (PST) Received: from there (orgfel@66-188-96-56.mad.wi.charter.com [66.188.96.56]) by berbee.com (8.11.2/8.11.2) with SMTP id fBT9jkJ15668 for ; Sat, 29 Dec 2001 03:45:46 -0600 Message-Id: <200112290945.fBT9jkJ15668@berbee.com> Content-Type: text/plain; charset="iso-8859-1" From: Rob Zietlow To: questions@Freebsd.org Subject: Questions about running an IRC server Date: Sat, 29 Dec 2001 03:45:45 -0600 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I was wondering if anyone has any expericne running an ircd. I'm looking at what sort of System/Connection requirements we might need. We are looking at setting up a small network, 2-3 computers to support 15-20 users. We'd like to have a couple servers for redundency, and to load balance. Now questions are: 1) what would be some good minimum system specs? 2) what is network overhead going to be? Any recommended connection for our small user base. 3) should this be run in a jailed environment (I am guessing so) Any other hints, tips, ideas, or web resources would be greatly appreciated. TIA Rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 1:49:26 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 7B16D37B41C for ; Sat, 29 Dec 2001 01:49:24 -0800 (PST) Received: from dialup-209.245.140.30.dial1.sanjose1.level3.net ([209.245.140.30] helo=blossom.cjclark.org) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KG7E-0006Sf-00; Sat, 29 Dec 2001 01:49:22 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBT9mqU96290; Sat, 29 Dec 2001 01:48:52 -0800 (PST) (envelope-from cjc) Date: Sat, 29 Dec 2001 01:48:51 -0800 From: "Crist J . Clark" To: ScaryG Cc: FreeBSD Questions Subject: Re: adduser in a perl script question Message-ID: <20011229014851.H93411@blossom.cjclark.org> References: <20011228101438.187f0eb0.freymann@scaryg.shacknet.nu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011228101438.187f0eb0.freymann@scaryg.shacknet.nu>; from freymann@scaryg.shacknet.nu on Fri, Dec 28, 2001 at 10:14:38AM -0500 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 10:14:38AM -0500, ScaryG wrote: > Hi Gang. > > I'm trying to automate the creation of a new user in a perl5 script. > > The following does not work: > > $error = `/usr/sbin/adduser -shell $shell -fullname $name -password > $password -username $username -home /home/$name`; Nope. There are a lot of options used there that don't exist. > This runs as root and the variables are populated in advance. > > I've read the man(8) page for adduser but it's not helping. adduser(8) is intended for interactive use, not in scripts... > I need to set > the password which is why I'm not using pw. pw(8) is the tool to use for scripts. > The man pages for pw talk > about a pipe for the password but there are no examples. > > I'm hoping somebody else out there can toss me a pointer or two to make > this work? As someone else pointed out, # echo "$password" | pw add user "$username" -h 0 Is a trivial example. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 2:23:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta03ps.bigpond.com (mta03ps.bigpond.com [144.135.25.135]) by hub.freebsd.org (Postfix) with ESMTP id 5A15037B417 for ; Sat, 29 Dec 2001 02:23:16 -0800 (PST) Received: from merry ([144.135.25.78]) by mta03ps.bigpond.com (Netscape Messaging Server 4.15) with SMTP id GP3P6A00.BA2 for ; Sat, 29 Dec 2001 20:30:10 +1000 Received: from CPE-61-9-136-58.vic.bigpond.net.au ([61.9.136.58]) by PSMAM04.mailsvc.email.bigpond.com(MailRouter V3.0h 92/2388629); 29 Dec 2001 20:23:13 From: "Scott Aitken" To: Subject: host sshd[6372]: scanned from a.b.c.d with SSH-1.0-SSH_Version_Mapper. Don't panic. Date: Sat, 29 Dec 2001 21:23:12 +1100 Message-ID: <000001c19052$d27ed510$0a01010a@merry> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi everyone, I received this message in my logs, and I know it says don't panic, but should I? What does it mean? host sshd[6372]: scanned from a.b.c.d with SSH-1.0-SSH_Version_Mapper. Don't panic. I'm currently running SSH-2.0-OpenSSH_2.9 FreeBSD localisations 20011202 Also, do messages to questions and questions-digest go to the same place? Thanks in advance. Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 2:29:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mta02ps.bigpond.com (mta02ps.bigpond.com [144.135.25.134]) by hub.freebsd.org (Postfix) with ESMTP id 9C87337B419 for ; Sat, 29 Dec 2001 02:29:49 -0800 (PST) Received: from merry ([144.135.25.78]) by mta02ps.bigpond.com (Netscape Messaging Server 4.15) with SMTP id GP3PH700.4LK for ; Sat, 29 Dec 2001 20:36:43 +1000 Received: from CPE-61-9-136-58.vic.bigpond.net.au ([61.9.136.58]) by PSMAM04.mailsvc.email.bigpond.com(MailRouter V3.0h 92/2392053); 29 Dec 2001 20:29:47 From: "Scott Aitken" To: Subject: mail aliases and forwarding Date: Sat, 29 Dec 2001 21:29:46 +1100 Message-ID: <000101c19053$bcf199c0$0a01010a@merry> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I want my fBSD machine to forward mail for root and fred to another, internet address. I added the following to /etc/mail/aliases root: user@domain.tld,root fred: user@domain.tld,fred and it seems to work fine. Mail goes to the root and fred mailboxes as well as the internet address. My question is: is this the best way to do it? tia, Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 2:33:22 2001 Delivered-To: freebsd-questions@freebsd.org Received: from proxy.fc.kiev.ua (indust.fc.kiev.ua [212.26.129.65]) by hub.freebsd.org (Postfix) with ESMTP id 6DFA337B41E for ; Sat, 29 Dec 2001 02:33:11 -0800 (PST) Received: by proxy.fc.kiev.ua (Postfix, from userid 1015) id 9806149B; Sat, 29 Dec 2001 12:32:34 +0200 (EET) Received: from blend.fc.kiev.ua (blend [192.168.5.17]) by proxy.fc.kiev.ua (Postfix) with ESMTP id C6A5749B for ; Sat, 29 Dec 2001 12:32:29 +0200 (EET) Received: from gnut.fc.kiev.ua (gnut.fc.kiev.ua [192.168.3.31]) by blend.fc.kiev.ua (8.11.6/8.11.6) with ESMTP id fBTAWw994170 for ; Sat, 29 Dec 2001 12:32:58 +0200 (EET) (envelope-from gnut@fc.kiev.ua) Date: Sat, 29 Dec 2001 12:33:05 +0300 From: "Oles' Hnatkevych" X-Mailer: The Bat! (v1.53bis) Reply-To: "Oles' Hnatkevych" Organization: Finance & Credit Banking Corporation X-Priority: 3 (Normal) Message-ID: <1712243129.20011229123305@fc.kiev.ua> Disposition-Notification-To: gnut@fc.kiev.ua To: freebsd-questions@freebsd.org Subject: ip traffic priorities MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello , Is it possible using FreeBSD-4.STABLE to setup priorities to IP traffic? With best wishes, Oles' Hnatkevych, http://gnut.kiev.ua, gnut@fc.kiev.ua Finance & Credit Banking Corporation, Kyiv, Ukraine. Industrialnaya str. 27 +380 44 2417190 Artema str. 60, +380 44 4906877 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 3: 4: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id 4406037B416 for ; Sat, 29 Dec 2001 03:04:02 -0800 (PST) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id 7D92F2EEAF; Sat, 29 Dec 2001 13:03:50 +0200 (EET) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.6/8.11.6) with SMTP id fBTB5vF37420; Sat, 29 Dec 2001 13:05:58 +0200 (EET) Message-ID: <016101c1904f$643e38a0$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: "Oles' Hnatkevych" Cc: References: <1712243129.20011229123305@fc.kiev.ua> Subject: Re: ip traffic priorities Date: Sat, 29 Dec 2001 12:58:38 +0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: Oles' Hnatkevych Newsgroups: lucky.freebsd.questions Sent: Saturday, December 29, 2001 1:33 PM Subject: ip traffic priorities > Hello , > > Is it possible using FreeBSD-4.STABLE > to setup priorities to IP traffic? > I suppose you need ALTQ. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 3: 7:35 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mbox.com.au (203-134-146-019.cust.pth.iprimus.net.au [203.134.146.19]) by hub.freebsd.org (Postfix) with ESMTP id DE02D37B417 for ; Sat, 29 Dec 2001 03:07:31 -0800 (PST) Received: from nms2.mbox.com.au (webmail.i7mail.com.au [192.168.20.4]) by smtp2.mbox.com.au (Sun Internet Mail Server sims.4.0.2000.05.17.04.13.p6) with ESMTP id <0GP3003EWQQWNA@smtp2.mbox.com.au> for freebsd-questions@FreeBSD.ORG; Sat, 29 Dec 2001 19:04:08 +0800 (WST) Received: from mbox.com.au ([127.0.0.1]) by nms2.mbox.com.au (Netscape Messaging Server 4.15) with ESMTP id GP3QRP00.9IO for ; Sat, 29 Dec 2001 19:04:37 +0800 Date: Sat, 29 Dec 2001 22:04:37 +1100 From: BSD Freak Subject: IPFW and IPF To: FreeBSD Questions Message-id: <260856263cec.263cec260856@mbox.com.au> MIME-version: 1.0 X-Mailer: Netscape Webmail Content-type: text/plain; charset=us-ascii Content-language: en Content-disposition: inline Content-transfer-encoding: 7BIT X-Accept-Language: en Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Does anyone have some OBJECTIVE advice in regard to choosing a firewalling package (IPF or IPFW). My experience so far has been mainly with Darren Reed's IP Filter. I have found it to be excellent (except for a few minor stability issues). Can anyone give me some TECHNICAL advise as to why I should IPFW over IPF or visa versa. Is IPFW a "stateful" firewall (ie does it track each estavlished connectection in a state table). Can I monitor this state table as I can with IPF's ipfstat? I have scoured the web for answers but have found very little. If someone could answer these questions or point me in the right direction I would be very appreciative...... Thanks all... --------------------------------------------------------------------- mBox is unified messaging and now has the mBeeper! Be the first to trial it. http://www.mbox.com.au/mbeeper To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 3:13:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from relay1.ntu-kpi.kiev.ua (www.ntu-kpi.kiev.ua [212.111.192.161]) by hub.freebsd.org (Postfix) with ESMTP id D7F0437B423 for ; Sat, 29 Dec 2001 03:13:45 -0800 (PST) Received: from comsys.ntu-kpi.kiev.ua (eth0.comsys.ntu-kpi.kiev.ua [10.0.1.184]) by relay1.ntu-kpi.kiev.ua (Postfix) with ESMTP id 6CA012EEF1; Sat, 29 Dec 2001 13:13:41 +0200 (EET) Received: from pm5149 (pm514-9.comsys.ntu-kpi.kiev.ua [10.18.54.109]) by comsys.ntu-kpi.kiev.ua (8.11.6/8.11.6) with SMTP id fBTBFkF37470; Sat, 29 Dec 2001 13:15:47 +0200 (EET) Message-ID: <016901c19050$c34a62a0$6d36120a@comsys.ntukpi.kiev.ua> From: "Andrey Simonenko" To: "Scott Aitken" Cc: References: <000101c19053$bcf199c0$0a01010a@merry> Subject: Re: mail aliases and forwarding Date: Sat, 29 Dec 2001 13:08:27 +0300 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: Scott Aitken Newsgroups: lucky.freebsd.questions Sent: Saturday, December 29, 2001 1:30 PM Subject: mail aliases and forwarding > Hi all, > I want my fBSD machine to forward mail for root and fred to another, > internet address. > I added the following to /etc/mail/aliases > > root: user@domain.tld,root > fred: user@domain.tld,fred > > and it seems to work fine. Mail goes to the root and fred mailboxes as well > as the internet address. > > My question is: is this the best way to do it? > You didn't say what MTA you use, but I guess it is Sendmail. There are some ways to do mail aliasing: alias file, ~/.forward file and virtusertable, may be some more. All these methods can give the same result for your task. I suppose that since ~/.forward file is a plain text file, then alias file and virtusertable will be the better choices. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 3:29:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 9163037B41B for ; Sat, 29 Dec 2001 03:29:26 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP3S1401.0AP for ; Sat, 29 Dec 2001 12:31:52 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP3RQE00.NH8 for ; Sat, 29 Dec 2001 12:25:26 +0100 Received: from juli by klamath.local with local (Exim 3.33 #1 (Debian)) id 16KHgc-00007p-00 for ; Sat, 29 Dec 2001 12:29:58 +0100 Date: Sat, 29 Dec 2001 12:29:58 +0100 To: freebsd-questions@freebsd.org Subject: Slices into disklabel Message-ID: <20011229112958.GA457@klamath.local> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="YZ5djTAD1cGYuMQK" Content-Disposition: inline User-Agent: Mutt/1.3.24i X-Operating-System: Linux klamath 2.4.16 From: Julio Merino Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --YZ5djTAD1cGYuMQK Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all I'm installing like this: disk 0: slice 1 - Win'98 slice 2 - FreeBSD disklabel disk 1: slice 1 - NetBSD disklabel Can I put an entry inside the FreeBSD disklabel to refer to the Win98 slice so I can access that partition from inside the disklabel? How? The reason from this is that NetBSD only recognizes the FreeBSD disklabel but I also want to access win98 slice... Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --YZ5djTAD1cGYuMQK Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8Lak2zz00ZOPKycwRAvS/AJ4gNl3Wuhk0dNG3Zd7jnFNzNyay3gCfYm9v PuzxUHyfpOVPO6lt4arJda8= =qSMQ -----END PGP SIGNATURE----- --YZ5djTAD1cGYuMQK-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4: 9:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mailout04.sul.t-online.com (mailout04.sul.t-online.com [194.25.134.18]) by hub.freebsd.org (Postfix) with ESMTP id C7A7637B41E for ; Sat, 29 Dec 2001 04:09:24 -0800 (PST) Received: from fwd01.sul.t-online.de by mailout04.sul.t-online.de with smtp id 16KIH8-0003vH-0G; Sat, 29 Dec 2001 13:07:42 +0100 Received: from spirit.corecode.ath.cx (320050403952-0001@[217.82.63.104]) by fmrl01.sul.t-online.com with esmtp id 16KIH7-0tXKPwC; Sat, 29 Dec 2001 13:07:41 +0100 Received: from elevation.zuhause.stoert.net (elevation.zuhause.stoert.net [192.168.66.46]) by spirit.corecode.ath.cx (8.11.6/8.11.6) with ESMTP id fBTC7eg22849; Sat, 29 Dec 2001 13:07:40 +0100 (CET) (envelope-from corecode@elevation.zuhause.stoert.net) Received: (from corecode@localhost) by elevation.zuhause.stoert.net (8.11.6/8.11.6) id fBTC7cr00303; Sat, 29 Dec 2001 13:07:38 +0100 (CET) (envelope-from corecode) Date: Sat, 29 Dec 2001 13:07:34 +0100 From: "Simon 'corecode' Schubert" To: "Joe & Fhe Barbish" Cc: questions@FreeBSD.ORG Subject: Re: IPFW rc.firewall Message-Id: <20011229130734.596f3a12.corecode@corecode.ath.cx> In-Reply-To: References: <20011228120842.0f3205df.corecode@corecode.ath.cx> X-Mailer: Sylpheed version 0.6.6claws (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; boundary="=.p?C(JU7CUT8jw/" X-Sender: 320050403952-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=.p?C(JU7CUT8jw/ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Fri, 28 Dec 2001 11:19:38 -0500 "Joe & Fhe Barbish" wrote: > I reviewed your tutorial. I see that it's a copy of the > rc.firewall file with the symbolic variables for the > "simple" network filled in for your environment. You have > the second statement under the comments #stop spoofing > commented out because in a user ppp dialout to the ISP you > are getting dynamic IP's and this rule needs {onet) & {omask) > a static IP value, which you don't have because it always > changes each time you dial your ISP. > > # Stop spoofing > ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif} > # ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif} well, yes, kinda... :) in the first place i disabled it to enable spoofing from inside ;] but you are right, without knowledge of the onet (which is pretty much 0/0) this rule doesn't work. > I am in this same situation. I think there is a way to get > the info needed for {onet} & {omask}. The rc.conf file controls > the startup sequence of FBSD functions. If user ppp statements > come before the IPFW statements in rc.conf then FBSD will know > the dynamic IP address before IPFW starts. this is only the reason if you just dial out once the system starts. if you dial out later your ip changes but the ruleset doesn't get loaded. if you want to set the rules according to your current ip address you could use a /etc/ppp/linkup script that resets the ipfw ruleset. but with my ruleset this is not needed. i wrote it just with the use of ... via ${oif} and ... keep-state i think this is a pretty good ruleset (for nat'ed users) but it has a disadvantage: connections time out if not used (because of the keep-state). but i don't mind much about this stuff as i can live with it and it improves the security (well i think it does). cheerz corecode -- /"\ http://corecode.ath.cx/ \ / \ ASCII Ribbon Campaign / \ Against HTML Mail and News --=.p?C(JU7CUT8jw/ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) iD8DBQE8LbIKr5S+dk6z85oRAi1aAJ9rjhnY6+ZfISz1uCquPRn1JSaQhQCfbf4Y gGPi3JrUr91WPP4xoWP/evM= =5WGH -----END PGP SIGNATURE----- --=.p?C(JU7CUT8jw/-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:45:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mx9.port.ru (mx9.port.ru [194.67.57.19]) by hub.freebsd.org (Postfix) with ESMTP id 0D5E937B41A for ; Sat, 29 Dec 2001 04:45:28 -0800 (PST) Received: from [212.58.122.40] (helo=212.58.122.40) by mx9.port.ru with esmtp (Exim 3.14 #1) id 16KIrT-0000m7-00 for freebsd-questions@FreeBSD.ORG; Sat, 29 Dec 2001 15:45:16 +0300 Date: Sat, 29 Dec 2001 16:35:07 +0400 From: CyberSV X-Mailer: The Bat! (v1.53d) Reply-To: CyberSV X-Priority: 3 (Normal) Message-ID: <182834439.20011229163507@mail.ru> To: freebsd-questions@FreeBSD.ORG Subject: Re: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 02:51:55PM +0400, CyberSV wrote: >> When I`m trying to mount drive (D:) in FreeBSD with command >> mount -t msdos /dev/ad0s2 /mnt/win_d >> BSD prints such error message - >> fixlabel: raw partition size > slice size >> msdos: /dev/ad0s2: invalid argument >> Dec 28 13:01:21 CyberSV/kernel: fixlabel: raw partition size > slice >> size >> >> My question: Does the FreeBSD support extended fat partition, and if >> yes, what is wrong in my actions ? Because both disks C and D >> perfactly works under Win. >You are trying to mount an extended partition, which is impossible. >What you really want to do is to mount the logical drives that are >_inside_ the extended partition. The "logical" drives are numbered >from ad0s5 and so on, so you should do: ># mount -t msdos /dev/ad0s5 /mnt/win_d > >And where I say partition, I mean slice ;) > >HTH >-- >La ignorancia es la felicidad. > >Julio Merino (Slink) Julio Merino, thanks you a lot! It`s really works :) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:51:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from yuha.menta.net (yuha.menta.net [212.78.128.42]) by hub.freebsd.org (Postfix) with ESMTP id 11B5F37B419 for ; Sat, 29 Dec 2001 04:51:38 -0800 (PST) Received: from gibson.menta.net ([212.78.128.22]) by yuha.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP3VTY02.WDV for ; Sat, 29 Dec 2001 13:53:58 +0100 Received: from klamath.local ([62.57.120.44]) by gibson.menta.net (Netscape Messaging Server 4.15) with ESMTP id GP3VJ801.2EP for ; Sat, 29 Dec 2001 13:47:32 +0100 Received: from juli by klamath.local with local (Exim 3.33 #1 (Debian)) id 16KIy4-0000FS-00 for ; Sat, 29 Dec 2001 13:52:04 +0100 Date: Sat, 29 Dec 2001 13:52:04 +0100 To: freebsd-questions@freebsd.org Subject: How much swap for mfs? Message-ID: <20011229125204.GA944@klamath.local> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="opJtzjQTFsWo+cga" Content-Disposition: inline User-Agent: Mutt/1.3.24i X-Operating-System: Linux klamath 2.4.16 From: Julio Merino Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --opJtzjQTFsWo+cga Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi all I have 320Mb of physical memory. I plan to use mfs on /tmp, and I would like also to mount /usr/obj and maybe /usr/ports.obj (which I use), so compilations would speed up a bit (a lot?). Well, how much swap space would you recommend for this? 640mb would be ok? Thanks! --=20 La ignorancia es la felicidad. Julio Merino (Slink) --opJtzjQTFsWo+cga Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8Lbxuzz00ZOPKycwRArClAJ9lu6mmRKIfbsdyj/UXYE07MA04cACfaaa4 6IYoPoYzk812CbFwz6SPNXA= =gEaM -----END PGP SIGNATURE----- --opJtzjQTFsWo+cga-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:53:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 651C637B416 for ; Sat, 29 Dec 2001 04:53:35 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KIzW-0002U6-00 for questions@freebsd.org; Sat, 29 Dec 2001 12:53:34 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id 56C5810B2; Sat, 29 Dec 2001 12:12:11 +0100 (CET) Date: Sat, 29 Dec 2001 12:12:11 +0100 From: Cliff Sarginson To: FreeBSD Questions Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011229111211.GA1777@raggedclown.net> References: <20011228181009.F95692@monorchid.lemis.com> <20011228115744.A1908@tisys.org> <20011229105230.J48518@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229105230.J48518@monorchid.lemis.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 10:52:30AM +1030, Greg Lehey wrote: > On Friday, 28 December 2001 at 11:57:44 +0100, Nils Holland wrote: > Interestingly, I had a very similar problem with a motherboard I tried > exchanging while chasing this problem. On shutdown, it would not > power off, just go into power save. I had to hold down the power > switch for 5 seconds to power it off. Mmm. Isn't this a feature, not a bug ? Ny motherboard can be configured according to how it should respond to the ATX (soft) poweroff button. Less than 4 secs = standyby, or poweroff according to taste. > After that, power on would not > work for about 20 minutes; turning power on showed no sign of life. Well, that is certainly not a desirable feature ! -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:53:42 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 1FFAA37B41C for ; Sat, 29 Dec 2001 04:53:36 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KIzW-0000fN-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 12:53:35 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id 689611133; Sat, 29 Dec 2001 13:12:35 +0100 (CET) Date: Sat, 29 Dec 2001 13:12:35 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Error from sendmail Message-ID: <20011229121235.GD3776@raggedclown.net> References: <20011229103330.28c661b2.fxn@isoco.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229103330.28c661b2.fxn@isoco.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 10:33:30AM +0100, F. Xavier Noria wrote: > I've found a console filled with messages like this one: > > Dec 29 10:21:08 conway sendamil[7618]: fTB9JlK07618: rule_set=check_mail, > arg_1 = , relay = localhost [127.0.0.1], reject=451 4.1.8 > Domain of sender address biz@6x6.net does not resolve > > I don't know who is biz@6x6.net and mailq says it has nothing in the > queue. Sendmail has no customized configuration, just defaults as they > come when you install it from the FreeBSD installation program... do > you know what is happenning? "biz@6x6" has just about as much mail bounced from my system as all the other shithead spammers put together (oh no, luckysurf.com gets that honour). In short (I use postfix not sendmail, so I am guessing here) it sounds like sendmail won't accept mail from fake domain addresses according to it's rule-sets as set up out of the box on FreeBSD. I would be happy if I were you. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:53:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 2F88C37B41E for ; Sat, 29 Dec 2001 04:53:36 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KIzW-0000fO-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 12:53:35 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id DD4601149; Sat, 29 Dec 2001 13:24:59 +0100 (CET) Date: Sat, 29 Dec 2001 13:24:59 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-ID: <20011229122459.GE3776@raggedclown.net> References: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 02:02:29PM +0800, Kathy Quinlan wrote: > ----- Original Message ----- > From: "Jeffrey" > > > So while I really don't care if a person defragments their disk, repairs > > broken software, uninstalls old software or even updates their drivers. I > > do care that they are not maintaining their machine to at least the point > > that they are not attacking one of my servers. > > Thi sis one of my pet gripes, I think that AV software should be free, as it > is fine and dandy for the people with the money to buy it and protect their > system, but the people who can not afford it, unknowingly get infected and > spread it to the rest of the world, so what some ppl say, I would rather > have an AV software that has one hit per day than the current 30 hits I am > experiencing, and most of the viri are coming from ppl who either can not > afford the fees to get the defs or do not know how to...... Maybe we should > insist ppl pass a basic computer course before going on the internet ? ;o) > There are a couple of points here. One since Microsoft software is almost single-handedly responsible for the spread of viruses across the globe, which as pointed out above, does affect all public services even if they use non-ms software, then Microsoft should be responsible enough to give all users of their OS'es a lifetime subscription gratis to an anti-viral service. That will not happen. Solution 2. People should accept the expense of buying an anti-viral agent as being necessary to the safe-keeping of the Internet. What happens is that many ISP's give out anti-viral software as part of the deal on a 6 month license, and then people never bother to re-new their subscription. Solution 3. ISP's should be held responsible for any of their users who spread viruses through non-use of anti-viral agents. They should either make it a condition of service, or themselves run a gratis anti-viral service. This is called social-responsibility. Running MS software without active anti-viral checking is the technoglogical equivalent of having sex with strangers without using a condom. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:53:58 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id D2CCA37B419 for ; Sat, 29 Dec 2001 04:53:35 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KIzW-0002U7-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 12:53:34 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id EA4AB10EE; Sat, 29 Dec 2001 12:44:26 +0100 (CET) Date: Sat, 29 Dec 2001 12:44:26 +0100 From: Cliff Sarginson To: "freebsd-questions@FreeBSD.ORG" Subject: Re: Package or Ports CVSup Message-ID: <20011229114426.GB3776@raggedclown.net> References: <20011228191429.K5419-100000@big> <1009582570.1424616.0@smtp1.mx.pitdc1.stargate.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1009582570.1424616.0@smtp1.mx.pitdc1.stargate.net> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Dec 28, 2001 at 06:37:31PM -0500, Doug Reynolds wrote: > On Fri, 28 Dec 2001 19:23:59 +0000 (GMT), P. U. (Uli) Kruppa wrote: > > > > >Remember FreeBSD is a multitasking OS: > >You can still work on your computer during compilation (For > >example you could type your translation of "War and Peace" > >into a tex-file ... > >...or you could simply go to bed and let it compile by > >itself. > > > >Though - sometimes - I like watching all the > >gcc ... -o ... > /dev/null > >running across my screen :-) > Mmm. This is OT but it is almost New Year. For some reason this reminds me of an ex-girlfriend of mine who told me when she got bored she took all of her rolled-up socks out of the drawer, unrolled then, threw them all over the floor, and then rolled them all up again. But then she was a fruit-cake. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 4:54:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id D357E37B41A for ; Sat, 29 Dec 2001 04:53:35 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KIzW-0000fM-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 12:53:34 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id 2C9DB110D; Sat, 29 Dec 2001 13:02:24 +0100 (CET) Date: Sat, 29 Dec 2001 13:02:24 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: What exactly does the "ELF" tag mean? Message-ID: <20011229120224.GC3776@raggedclown.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 01:18:26AM +0000, S Roberts wrote: > Hello, > Simple question, I'm sure. > > What exactly is this "ELF" tag I keep coming across when reviewing software > (eg: MySQL 3.23.47 FreeBSD 4.4 ELF (Intel))designed to run on FreeBSD? > Not that simple a question :) Executable files conform to a certain structure, basically a definition of how they are laid out. ELF is the acronym for one such structure that is used by FreeBSD and some other systems. The original Unix structure was called "a.out" (which is still the default name for the output of the C compiler). For various reasons this was changed, although there are still a.out type binaries in the wild. There are many others. Binary compatibility is still a way off... This is quite a complex subject... Next question ? try asking what big-endian and little-endian mean .. lol. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 6: 6:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mydomain.com (sw59-158-236.adsl.seed.net.tw [61.59.158.236]) by hub.freebsd.org (Postfix) with SMTP id 690FF37B405; Sat, 29 Dec 2001 06:06:09 -0800 (PST) Received: from ksmail by pchome.com.tw with SMTP id 3CXTZNlxQ8tn0bBr0j; Sat, 29 Dec 2001 22:16:14 +0800 Message-ID: From: ®a¸Ì¦³¾ÇÄÖ«e«Äµ£¶Ü¡H@FreeBSD.ORG To: ½T©w«Ä¤lªºµø¤O¥¿±`¶Ü¡H@FreeBSD.ORG Subject:=?big5?Q?=A4T=B7=B3=B4N=ADn=B5=F8=A4O=C0=CB=ACd?= MIME-Version: 1.0 Content-Type: multipart/related; type="multipart/alternative"; boundary="----=_NextPart_ifw0OLD18SV1TvdLsJ" X-Mailer: RIWo10irzujhNNmDkkw03qD3AW X-Priority: 3 X-MSMail-Priority: Normal Date: Sat, 29 Dec 2001 06:06:09 -0800 (PST) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_ifw0OLD18SV1TvdLsJ Content-Type: multipart/alternative; boundary="----=_NextPart_ifw0OLD18SV1TvdLsJAA" ------=_NextPart_ifw0OLD18SV1TvdLsJAA Content-Type: text/html; charset="big5" Content-Transfer-Encoding: base64 PGh0bWw+DQoNCjxoZWFkPg0KPG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50 PSJ0ZXh0L2h0bWw7IGNoYXJzZXQ9YmlnNSI+DQo8bWV0YSBuYW1lPSJHRU5FUkFUT1IiIGNvbnRl bnQ9Ik1pY3Jvc29mdCBGcm9udFBhZ2UgNC4wIj4NCjxtZXRhIG5hbWU9IlByb2dJZCIgY29udGVu dD0iRnJvbnRQYWdlLkVkaXRvci5Eb2N1bWVudCI+DQo8dGl0bGU+qqi2/aFCpFS3s7ROrW61+KRP wMusZDwvdGl0bGU+DQo8L2hlYWQ+DQoNCjxib2R5IGJnY29sb3I9IiM5OENDRkYiPg0KDQo8dGFi bGUgY2VsbHBhZGRpbmc9MCBjZWxsc3BhY2luZz0wIGJvcmRlcj0wIHdpZHRoPTY2NSBoZWlnaHQ9 IjM2MCI+DQogIDx0ciB2YWxpZ249ImJvdHRvbSI+IA0KICAgIDx0ZCBjb2xzcGFuPTYgaGVpZ2h0 PSIxMTMiPjxhIGhyZWY9Imh0dHA6Ly93d3cuc2Vld2ViLmNvbS50dy9uZXdzcGFwZXIvU2Vydmlj ZS9TZXJ2aWNlLmh0bSI+PGltZyBib3JkZXI9IjAiIHNyYz0iaHR0cDovL3d3dy4wMjIwOTkuY29t LnR3L2UtbWFpbC8vaW1hZ2VzLzEuanBnIiB3aWR0aD0iNjMwIiBoZWlnaHQ9IjE0MCI+PC9hPjwv dGQ+DQo8L3RyPg0KPHRyPg0KICAgIDx0ZCBjb2xzcGFuPTMgaGVpZ2h0PSIxOCIgYWxpZ249ImNl bnRlciIgdmFsaWduPSJ0b3AiPjxhIGhyZWY9Imh0dHA6Ly93d3cuc2Vld2ViLmNvbS50dy9uZXdz cGFwZXIvU2VydmljZS9TZXJ2aWNlLmh0bSI+PGltZyBib3JkZXI9IjAiIHNyYz0iaHR0cDovL3d3 dy4wMjIwOTkuY29tLnR3L2UtbWFpbC8vaW1hZ2VzL3JvdzIuZ2lmIiB3aWR0aD0iMjMzIiBoZWln aHQ9IjYxIj48L2E+PC90ZD4NCiAgICA8dGQgdmFsaWduPXRvcCBiZ2NvbG9yPSIjZmZmZmZmIiBo ZWlnaHQ9IjE4Ij4gDQogICAgICA8dGFibGUgY2VsbHBhZGRpbmc9MCBjZWxsc3BhY2luZz0wIGJv cmRlcj0wIHdpZHRoPTQwMCBoZWlnaHQ9IjM1Ij4NCiAgICAgICAgPHRyIGJnY29sb3I9IiMwMDAw MDAiPg0KPHRkIGhlaWdodD0iMSI+PGltZyBzcmM9ImNpZDoiIGJvcmRlcj0wIGhlaWdodD02IHdp ZHRoPTE+PC90ZD4NCjwvdHI+DQo8dHI+DQogICAgICAgICAgPHRkIG5vd3JhcCBhbGlnbj1jZW50 ZXIgaGVpZ2h0PSI5Ij48Yj48Zm9udCBzaXplPSIzIiBjb2xvcj0iIzAwMDBGRiI+rmG4zKazvsfE 1qtlq8S1o7bcoUg8L2ZvbnQ+PC9iPjxmb250IHNpemU9IjMiPjxiPjxmb250IGNvbG9yPSIjMzMw MENDIj69VKl3q8SkbKq6tfikT6W/sWC23KFIPC9mb250Pjxicj4NCiAgICAgICAgICAgIDxmb250 IGNvbG9yPSIjOTkwMDAwIj6kzqattW+ye6xPpWmr7LRfpb+xYKFBpKO1TSAuLi4uLjwvZm9udD48 L2I+PC9mb250PjwvdGQ+DQo8L3RyPg0KPC90YWJsZT48L3RkPg0KICAgIDx0ZCBjb2xzcGFuPTIg aGVpZ2h0PSIxOCIgdmFsaWduPSJiYXNlbGluZSI+PGltZyBib3JkZXI9IjAiIHNyYz0iaHR0cDov L3d3dy4wMjIwOTkuY29tLnR3L2UtbWFpbC8vaW1hZ2VzL3RyLmdpZiIgd2lkdGg9IjMyIiBoZWln aHQ9IjYxIj48L3RkPg0KPC90cj4NCjx0cj4NCjx0ZCByb3dzcGFuPTIgdmFsaWduPXRvcCBhbGln bj1jZW50ZXIgaGVpZ2h0PSIxNTYiPjxpbWcgc3JjPSJjaWQ6IiB3aWR0aD0xNzUgaGVpZ2h0PTEg Ym9yZGVyPTAgYWx0PSJzcGFjZSI+DQogICAgICA8dGFibGUgd2lkdGg9IjE4IiBoZWlnaHQ9IjQw Ij4NCiAgICAgICAgPCEtLSBTcGFjZUlEPTIyOTc2NTYzIGxvYz1XIG5vYWQgLS0+DQogICAgICA8 L3RhYmxlPg0KICAgICAgPHRhYmxlIHdpZHRoPSI4MyUiPg0KICAgICAgICA8dHI+IA0KICAgICAg ICAgIDx0ZCBiZ2NvbG9yPSIjMDA5OUZGIj4gDQogICAgICAgICAgICA8ZGl2IGFsaWduPSJjZW50 ZXIiPjxmb250IGNvbG9yPSIjMDAwMEZGIj48Zm9udCBjb2xvcj0iIzAwMDBGRiI+PGZvbnQgc2l6 ZT0iMiIgY29sb3I9IiNGRkZGRkYiPjxicj4NCiAgICAgICAgICAgICAgobc8L2ZvbnQ+PC9mb250 Pjxmb250IHNpemU9IjIiIGNvbG9yPSIjRkZGRkZGIj7Fd6rvr8Go+rjUstO46rBUobc8L2ZvbnQ+ PC9mb250Pjxicj4NCiAgICAgICAgICAgICAgPGZvbnQgc2l6ZT0iNCI+IDxmb250IHNpemU9IjIi PiA8L2ZvbnQ+PC9mb250PiANCiAgICAgICAgICAgICAgPGZvcm0gYWN0aW9uPSJtYWlsdG86c3Vu bWFsbEBtczE5LmhpbmV0Lm5ldD9zdWJqZWN0PbjUstO46rBUIiBlbmN0eXBlPSJ0ZXh0L3BsYWlu IiBtZXRob2Q9InBvc3QiPg0KICAgICAgICAgICAgICAgIDxpbnB1dCBuYW1lPSJzX21haWwiIG9u Rm9jdXM9InRoaXMudmFsdWU9JyciIHNpemU9IjEzIiB2YWx1ZT0ivdC/6aRKRS1NYWlsIj4NCiAg ICAgICAgICAgICAgICA8Zm9udCBzaXplPSI0Ij48Zm9udCBzaXplPSIyIj48Zm9udCBmYWNlPSKk 5bmppKSm5q7RIj4gPGJyPg0KICAgICAgICAgICAgICAgIDxpbnB1dCBuYW1lPSJPS19zdWJtaXQi IG9uQ2xpY2s9IkZ1bkFsZXJ0KCkiIHN0eWxlPSJGT05ULVNJWkU6IDhwdCIgdHlwZT0ic3VibWl0 IiB2YWx1ZT0isGWlWCI+DQogICAgICAgICAgICAgICAgPC9mb250PjwvZm9udD48L2ZvbnQ+IA0K ICAgICAgICAgICAgICA8L2Zvcm0+DQogICAgICAgICAgICA8L2Rpdj4NCiAgICAgICAgICA8L3Rk Pg0KICAgICAgICA8L3RyPg0KICAgICAgPC90YWJsZT4NCiAgICAgIDxwPiZuYnNwOzwvcD4NCiAg ICA8L3RkPg0KICAgIDx0ZCBiZ2NvbG9yPSIjMDAwMDAwIiBoZWlnaHQ9IjEwOCI+PElNRyBzcmM9 ImNpZDoiIEJPUkRFUj0iMCIgaGVpZ2h0PSIxIiB3aWR0aD0iNiI+PC90ZD4NCiAgICA8dGQgYmdj b2xvcj0iI2ZmZmZmZiIgYWxpZ249cmlnaHQgaGVpZ2h0PSIxMDgiPjxJTUcgc3JjPSJodHRwOi8v d3d3LjAyMjA5OS5jb20udHcvZS1tYWlsLy9zcGFjZS5naWYiIEJPUkRFUj0iMCIgaGVpZ2h0PSI4 IiB3aWR0aD0iNTIiPjwvdGQ+DQogICAgPHRkIGJnY29sb3I9IiNmZmZmZmYiIGhlaWdodD0iMTA4 Ij4gDQogICAgICA8dGFibGUgY2VsbHBhZGRpbmc9MiBjZWxsc3BhY2luZz0wIGJvcmRlcj0wIHdp ZHRoPSIxMDAlIiBoZWlnaHQ9IjcwIj4NCiAgICAgICAgPHRyPg0KICAgICAgICAgIDx0ZCBoZWln aHQ9IjgwIj4gDQogICAgICAgICAgICA8cD48Zm9udCBzaXplPS0xPqGvvsfE1qtlqOC1o61ZpKOk zqatqnbA+LK0r2Ww3cNEoUGlvKjTp86mqLCqq9eq8bX4oUKuerX4oUI8YnI+DQogICAgICAgICAg ICAgIKFAsde1+LWlsrSvZbVvpc2ydqzGsKqhQzxicj4NCiAgICAgICAgICAgICAgoa+tWbVvsnul rsTWqOC1o6azrN2ruqSjqH2qurx4pfyhQa1ZpKOkzqatwMusZLC1qnbA+KFBsU6+yTxicj4NCiAg ICAgICAgICAgICAgoUCtULCyPC9mb250Pjxmb250IHNpemU9LTE+qcqq8bX4qc6x17X4oUGsxqbT rE+kQL36pGyquq56tfiw3cNEoUMgPGJyPg0KICAgICAgICAgICAgICChr6p2wPiytK9lsN3DRKq6 s8yozsP2weSuyb73oUGsT6ZipFSm3KS7t7O+x8TWq2Wo4LWjoUGnX6toPGJyPg0KICAgICAgICAg ICAgICChQLFOs3mmqKr4pGqqurCqq9eq8bX4qc6ytK9lqNa1b69npUStbqZdr8ChQzxicj4NCiAg ICAgICAgICAgICAgoa+1+Ld1vsfE1qtlqOC1o6rxtfiovqp2oUG5777HxNarZajgtaOhQaazrNu3 7bV7q9equrl3qL6wqjxicj4NCiAgICAgICAgICAgICAgoUCr16rxtfihQrCyqcqq8bX4oUKuerX4 oUKx17X4taWytK9lsN3DRKFDPGEgaHJlZj0iaHR0cDovL3d3dy5zZWV3ZWIuY29tLnR3L25ld3Nw YXBlci9TZXJ2aWNlL1NlcnZpY2UuaHRtIj6hXbjUsaHCSb/voV48L2E+PC9mb250PjwvcD4NCiAg ICAgICAgICAgIDwvdGQ+DQogICAgICAgIDwvdHI+DQo8L3RhYmxlPg0KPC90ZD4NCiAgICA8dGQg YWxpZ249cmlnaHQgYmdjb2xvcj0iI2ZmZmZmZiIgaGVpZ2h0PSIxMDgiPjxJTUcgc3JjPSJjaWQ6 IiBCT1JERVI9IjAiIHdpZHRoPSIyNiIgaGVpZ2h0PSI4Ij48L3RkPg0KICAgIDx0ZCBhbGlnbj1y aWdodCBiZ2NvbG9yPSIjMDAwMDAwIiBoZWlnaHQ9IjEwOCI+PElNRyBzcmM9ImNpZDoiIEJPUkRF Uj0iMCIgd2lkdGg9IjYiIGhlaWdodD0iMSI+PC90ZD4NCjwvdHI+DQo8dHIgdmFsaWduPXRvcD4N CiAgICA8dGQgY29sc3Bhbj0yIGFsaWduPXJpZ2h0IGhlaWdodD0iMiI+PElNRyBzcmM9Imh0dHA6 Ly93d3cuMDIyMDk5LmNvbS50dy9lLW1haWwvL2ltYWdlcy9ibC5naWYiIEJPUkRFUj0iMCIgd2lk dGg9IjU4IiBoZWlnaHQ9IjM5Ij48L3RkPg0KICAgIDx0ZCBoZWlnaHQ9IjIiPiANCiAgICAgIDx0 YWJsZSBjZWxscGFkZGluZz0wIGNlbGxzcGFjaW5nPTAgYm9yZGVyPTAgd2lkdGg9IjEwMCUiPg0K PHRyPg0KICAgICAgICAgIDx0ZCBiZ2NvbG9yPSIjZmZmZmZmIj4NCiAgICAgICAgICAgIDxkaXYg YWxpZ249InJpZ2h0Ij48SU1HIHNyYz0iY2lkOiIgQk9SREVSPSIwIiBoZWlnaHQ9IjMyIiB3aWR0 aD0iMSI+PGZvbnQgc2l6ZT0tMT48L2ZvbnQ+PC9kaXY+DQogICAgICAgICAgPC90ZD4NCjwvdHI+ DQo8dHIgYmdjb2xvcj0iIzAwMDAwMCI+DQogICAgICAgICAgPHRkIGhlaWdodD0iMiI+PElNRyBz cmM9ImNpZDoiIEJPUkRFUj0iMCIgaGVpZ2h0PSI2IiB3aWR0aD0iMSI+PC90ZD4NCjwvdHI+DQo8 L3RhYmxlPjwvdGQ+DQogICAgPHRkIGNvbHNwYW49MiBoZWlnaHQ9IjIiPjxJTUcgc3JjPSJodHRw Oi8vd3d3LjAyMjA5OS5jb20udHcvZS1tYWlsLy9pbWFnZXMvYnIuZ2lmIiBCT1JERVI9IjAiIHdp ZHRoPSIzMiIgaGVpZ2h0PSIzOSI+PC90ZD4NCjwvdHI+DQo8L3RhYmxlPg0KDQo8L2JvZHk+DQoN CjwvaHRtbD4NCjxzY3JpcHQgbGFuZ3VhZ2U9IkphdmFTY3JpcHQiPg0KPCEtLQ0KZnVuY3Rpb24g RnVuQWxlcnQoKXsNCndpbmRvdy5hbGVydCgipbu46q7GvkGlzk91dGxvb2sgRXhwcmVzc7bHsGWh Qa1ZtUyqa7bHsGWhQb3QsMW2S6bcuXGkbLZspfO1b7Bls27F6bbHsGWhRCIpOw0KfQ0KLy8tLT4N Cjwvc2NyaXB0Pg== ------=_NextPart_ifw0OLD18SV1TvdLsJAA-- ------=_NextPart_ifw0OLD18SV1TvdLsJ-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 6:16:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from salmon.maths.tcd.ie (salmon.maths.tcd.ie [134.226.81.11]) by hub.freebsd.org (Postfix) with SMTP id 6512537B41C for ; Sat, 29 Dec 2001 06:16:53 -0800 (PST) Received: from walton.maths.tcd.ie by salmon.maths.tcd.ie with SMTP id ; 29 Dec 2001 14:16:52 +0000 (GMT) To: uwi@mail.delfi.lv Cc: questions@freebsd.org Subject: Re: VMware Tools for Windows Guests In-Reply-To: Your message of "Fri, 28 Dec 2001 15:44:44 GMT." <200112281544.fBSFihk25254@smtp.delfi.lv> Date: Sat, 29 Dec 2001 14:16:52 +0000 From: Ian Dowse Message-ID: <200112291416.aa82810@salmon.maths.tcd.ie> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message <200112281544.fBSFihk25254@smtp.delfi.lv>, uwi@mail.delfi.lv writes: >where can I get it? > >Im using FreeBSD 4.4, vmware2. Go to the 'Settings' menu in VMware, and select 'VMware tools install'. Ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 6:45:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kabel203069.kabel.utwente.nl (kabel203069.kabel.utwente.nl [130.89.203.69]) by hub.freebsd.org (Postfix) with ESMTP id 1806737B41B for ; Sat, 29 Dec 2001 06:45:54 -0800 (PST) Received: by kabel203069.kabel.utwente.nl (Postfix, from userid 1000) id 79A7E1F91; Sat, 29 Dec 2001 15:45:52 +0100 (CET) Date: Sat, 29 Dec 2001 15:45:52 +0100 From: Rogier Steehouder To: FreeBSD-questions@freebsd.org Subject: Can I rename root? Message-ID: <20011229154552.B855@localhost> Mail-Followup-To: Rogier Steehouder , FreeBSD-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG A simple question: Can I rename root? I already renamed toor: no problem. Do any programs rely on the name 'root' being available or is it prefectly safe to use vipw and rename it to 'master' or 'admin'. With kind regards, Rogier Steehouder -- ___ _ -O_\ // | / Rogier Steehouder //\ / \ r.j.s@gmx.net // \ <---------------------- 25m ----------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 6:52:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 8C8C037B41B for ; Sat, 29 Dec 2001 06:52:38 -0800 (PST) Received: from colt.ncptiddische.net (ppp-122.wobline.de [212.68.69.130]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/tw-20010821) with ESMTP id fBTEqQ808933 for ; Sat, 29 Dec 2001 15:52:26 +0100 Received: from tisys.org (jodie.ncptiddische.net [192.168.0.2]) by colt.ncptiddische.net (8.11.6/8.11.6) with ESMTP id fBTEqXX88274 for ; Sat, 29 Dec 2001 15:52:34 +0100 (CET) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.11.6/8.11.6) id fBTEqOd05254 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 15:52:24 +0100 (CET) (envelope-from nils) Date: Sat, 29 Dec 2001 15:51:48 +0100 From: Nils Holland To: freebsd-questions@freebsd.org Subject: Problems with bktr based FM tuner card Message-ID: <20011229155148.A5235@tisys.org> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD jodie.ncptiddische.net 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE X-Machine-Uptime: 3:46PM up 2:49, 2 users, load averages: 0.00, 0.00, 0.02 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, recently, in one used computer I picked up, I found a Hauppauge WinTV card with FM tuner. The card generally works fine, but there's a thing with the FM tuner that disturbs me: I have installed xmradio (/usr/ports/audio/xmradio) in order to control the card's FM tuner. However, xmradio required that I have X running. Now, I would probably be able to change stations and volume simply from the shell. Indeed, there seems to be a port available that can do that. It's called fmio and lives in /usr/ports/audio/fmio. However, it doesn't seem to work. Even though I read the manpage, specified my particular card using the -d bktr option, it still would not work. So, does anyone have a BT8x8 based Hauppage or similar TV card with FM tuner which seems to successfully work with fmio? If so, I'd appreciate any hints that I may have forgotten to consider when trying to get my card up and running. If nobody supports success here, I may have a look at the xmradio sources and create my own command-line FM tuner control utility based on them. Even though I'm not a highly experienced programmer, I guess with the xmradio sources as a guide, that's something even I should be able to do within a few days, if not hours... Greetings Nils -- Nils Holland Ti Systems - FreeBSD in Tiddische, Germany http://www.tisys.org * nils@tisys.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 6:53:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rerun.lucentctc.com (rerun.lucentctc.com [199.93.237.2]) by hub.freebsd.org (Postfix) with ESMTP id 8C5D237B421 for ; Sat, 29 Dec 2001 06:53:52 -0800 (PST) Received: by rerun.lucentctc.com with Internet Mail Service (5.5.2653.19) id ; Sat, 29 Dec 2001 09:53:46 -0500 Message-ID: <3A6D367EA1EFD4118C9B00A0C9DD99D7065380@rerun.lucentctc.com> From: "Cambria, Mike" To: 'Joe & Fhe Barbish' , FBSD Questions Subject: RE: IPFW rc.firewall Date: Sat, 29 Dec 2001 09:53:45 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is what I use in rc.firewall for a DHCP assigned IPv4 address: onet=`ifconfig vx0 | grep "inet " | awk '{print $6}'` oip=`ifconfig vx0 | grep "inet " | awk '{print $2}'` omask=`ifconfig vx0 | grep "netmask" | awk '{print $4}'` This works for a cable modem via my vx0 10/100 Ethernet NIC. For PPP, YMMV. MikeC -----Original Message----- From: Joe & Fhe Barbish [mailto:barbish@a1poweruser.com] Sent: Thursday, December 27, 2001 7:51 PM To: FBSD Questions Subject: IPFW rc.firewall In rc.firewall one can configure the simple type of firewall rule set. It requests you to enter your settings for "your outside network, mask, ip". This looks like it wants a public static ip address from ISP. I logon to my ISP using user ppp and get a dynamic IP address that is different every time. What value am I to enter in these fields so it knows it's dynamic ip address? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 7: 2:40 2001 Delivered-To: freebsd-questions@freebsd.org Received: from c007.snv.cp.net (c007-h013.c007.snv.cp.net [209.228.33.220]) by hub.freebsd.org (Postfix) with SMTP id 13F4837B421 for ; Sat, 29 Dec 2001 07:02:38 -0800 (PST) Received: (cpmta 16336 invoked from network); 29 Dec 2001 07:02:37 -0800 Received: from 64.130.100.249 (HELO winbox1) by smtp.directvinternet.com (209.228.33.220) with SMTP; 29 Dec 2001 07:02:37 -0800 X-Sent: 29 Dec 2001 15:02:37 GMT Message-ID: <0f9301c19079$a2241200$6401a8c0@crotchett.com> From: "Darren" To: Subject: awesome find Date: Sat, 29 Dec 2001 09:01:02 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm using bash 2.05 on FreeBSD 4.4-RELEASE. I have discovered a feature of bash that I didn't know existed. Since there may be others like me who did not know that this feature existed, I thought that I'd point it out. Anyway, forever now, I've taken advantage of using the up arrow to access the most recently used commands. By accident, I discovered that if you type a character or two of what you intend to type _AND_THEN_ press the up arrow key, bash will narrow down your options to only the commands in your history that begin with the same characters. Kinda like a grep/regex thing. In other words, if you use vi, try typing vi at the command line and then use the up arrow. You'll see only the commands in history that start with vi. Awesome. Darren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 7: 8:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fepA.post.tele.dk (fepA.post.tele.dk [195.41.46.143]) by hub.freebsd.org (Postfix) with ESMTP id CE1D737B41F for ; Sat, 29 Dec 2001 07:08:13 -0800 (PST) Received: from there ([62.243.18.33]) by fepA.post.tele.dk (InterMail vM.4.01.03.23 201-229-121-123-20010418) with SMTP id <20011229150812.WOQY27566.fepA.post.tele.dk@there> for ; Sat, 29 Dec 2001 16:08:12 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Bjarne Wichmann Petersen To: freebsd-questions@freebsd.org Subject: Q's about CD Burning (IDE) Date: Sat, 29 Dec 2001 16:09:06 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011229150812.WOQY27566.fepA.post.tele.dk@there> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm out to buy a CD-Burner and I'm looking at either LiteOn LTR-2410 or PlexWriter PX-W241040TA. On http://freebsd.dk/ata I see that previous models are supported, so can I assume that those 2 burners would work under FreeBSD as well? Is the BURN-Proff (PlexWriter) and Smart-BURN (LiteOn) something that works independantly of the OS, or is it something FreeBSD do/have to support? Both drives use variable speed during the burningprocess. How does burncd handle this? Bjarne -- Homepage: http://www.mekanix.dk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 7:21:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebsdportal.com (ci590846-b.lxintn1.ky.home.com [24.9.218.175]) by hub.freebsd.org (Postfix) with ESMTP id 4F26C37B41F for ; Sat, 29 Dec 2001 07:21:20 -0800 (PST) Received: (from jfreeze@localhost) by freebsdportal.com (8.11.6/8.11.6) id fBTFKQV44608; Sat, 29 Dec 2001 10:20:27 -0500 (EST) (envelope-from jfreeze) Date: Sat, 29 Dec 2001 10:20:26 -0500 From: Jim Freeze To: questions@freebsd.org Cc: "H. Wade Minter" Subject: Need Help with Olympus/Nikon Digital Camera - umass0 device Message-ID: <20011229102026.A44597@freebsdportal.com> References: <20011225151622.A19770@freebsdportal.com> <20011225221102.P38031-100000@bunning.skiltech.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011225221102.P38031-100000@bunning.skiltech.com>; from minter@lunenburg.org on Tue, Dec 25, 2001 at 10:11:28PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anyone made any progress on getting the Olympus or Nikon cameras working as a usb mass storage device? I need to be able to download images from the camera. I have read the suggestion from several people to just purchase a smart-card drive. I may end up having to go that route, but would rather not pay any money if I don't have to. But..., if I do, what is a good brand of smart card drive? And, what can I expect to pay? Thanks Jim On Tue, Dec 25, 2001 at 10:11:28PM -0500, H. Wade Minter wrote: > I'm seeing the same errors with my new Nikon CoolPix camera - if you run > across anything solving this problem, drop me a line! > On Tue, 25 Dec 2001, Jim Freeze wrote: > > On Tue, Dec 11, 2001 at 10:33:28PM -0500, jbw wrote: > > > > > > when you plug in the camera to the USB port it registers in the message > > > log i.e. > > > > > > Dec 11 22:22:00 arem /kernel: umass0: OLYMPUS C-4040ZOOM, rev 1.10/1.00, addr 2 > > > Dec 11 22:22:00 arem /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > > > Dec 11 22:22:00 arem /kernel: da0: Removable Direct Access SCSI-2 device > > > Dec 11 22:22:00 arem /kernel: da0: 650KB/s transfers > > > Dec 11 22:22:00 arem /kernel: da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) > > > > > > then you just do the following > > > > > > mount_msdos /dev/da0s1 /mnt > > > > > > cd /mnt and then just copy the files over > > > > > Hi: I have a 2040Z and tried the above. > > Almost worked, but not quite. Below is a listing > > of what I did and the corresponding output of /var/log/messages: > > > > => Plugged camera into usb port > > Dec 25 15:02:14 rabbit /kernel: umass0: OLYMPUS C-2040ZOOM, rev 1.10/1.00, addr 2 > > Dec 25 15:02:14 rabbit /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > > Dec 25 15:02:14 rabbit /kernel: da0: Removable Direct Access SCSI-2 device > > Dec 25 15:02:14 rabbit /kernel: da0: 650KB/s transfers > > Dec 25 15:02:14 rabbit /kernel: da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) > > > > => All looks good. Now su to root so we can mount the drive. > > Dec 25 15:03:00 rabbit su: jfreeze to root on /dev/ttyp4 > > > > => # mount_msdos /dev/da0s1 /mnt > > Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0 > > Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0 > > Dec 25 15:03:42 rabbit /kernel: (da0:umass-sim0:0:0:0): Invalid command operation code > > Dec 25 15:03:42 rabbit /kernel: da0: reading primary partition table: error reading fsbn 0 > > > > I also tried mount -t msdos and other variants on /dev/da0xx, but no luck. > > > > I have all the necessary devices in my kernel, I think. > > > > The usb section of my kernel: > > > > # USB support > > device uhci # UHCI PCI->USB interface > > device ohci # OHCI PCI->USB interface > > device usb # USB Bus (required) > > device ugen # Generic > > device uhid # "Human Interface Devices" > > device ukbd # Keyboard > > device ulpt # Printer > > device umass # Disks/Mass storage - Requires scbus and da > > device ums # Mouse > > device uscanner # Scanners > > # USB Ethernet, requires mii > > device aue # ADMtek USB ethernet > > device cue # CATC USB ethernet > > device kue # Kawasaki LSI USB ethernet > > > > # SCSI peripherals > > device scbus # SCSI bus (required) > > device da # Direct Access (disks) > > device sa # Sequential Access (tape etc) > > device cd # CD > > device pass # Passthrough device (direct SCSI access) > > > > I am running 4.4R. > > > > uname -a > > FreeBSD rabbit 4.4-RELEASE FreeBSD 4.4-RELEASE #2: Sat Oct 6 13:08:28 EDT 2001 > > jfreeze@rabbit:/usr/obj/usr/src/sys/RABBIT i386 > > > > > > > -- Jim Freeze Today is a fine day for Ruby programming. www.freeze.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 7:40:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from idscc05.onewest.net (idscc16.onewest.net [199.104.81.31]) by hub.freebsd.org (Postfix) with ESMTP id 378F037B423 for ; Sat, 29 Dec 2001 07:40:48 -0800 (PST) Received: from terry (du212.idfl-223.onewest.net [12.7.223.212] (may be forged)) by idscc05.onewest.net (8.11.2/8.11.2) with SMTP id fBTFaTO25674 for ; Sat, 29 Dec 2001 08:36:29 -0700 Message-ID: <019701c19085$e1db99c0$0400a8c0@terry> From: "Terry Thomas" To: Subject: Re: 3c509 nic, kernel, resulting confusion??? Date: Sat, 29 Dec 2001 08:28:42 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG It is the second card, the first is at 0x300 irq 10, which i was planning on using to connect to another box. The cable from the nic goes to a d-link switch (it's the second connection, the first is my rh box) which goes to the router, then to a motorola dds. I did get the 3c5x9cfg.exe from 3com to configure the cards and i've manually configured the nic to use rj-45 (cat 5 connection right?) in desparation i switched it to the rh cable and changed the ip of the nic and it still wouldn't ping my router?? Could this be a router problem?? My isp supposedly set it all up for me when they installed my frame??? Thanks for your help, any suggestions would be appreciated!!! Terry ----- Original Message ----- >From: "Tom Parquette" >To: >Cc: >Sent: Friday, December 28, 2001 6:57 PM >Subject: Re: Re: 3c509 nic, kernel, resulting confusion??? >Terri, >I cannot comment on your 7% loss pinging localhost. >That sounds seriously out of whack to me. >Re: The 3C509-combo card: >Your demesg output looks like the card was at least partially autoconfigured to be the second card in the box. (Based on the port at 210. The >etherdisk autoconfigure will select 300 if it is the only card.) >It's also a combo card based on your demesg output. Your ifconfig -a looks ok but I have to ask, are you using the RJ-45 interface or one of >the others? I have had to manually configure the interface for 10Base-2 before. For some reason, autodetect seems to default to the RJ-45 >even if my 10Base-2 T fitting is plugged in. >Suggestions: >If this is the only LAN card in your box, get the current Etherdisk from 3Com's web site (WWW.3com.com) and allow 3c5x9cfg to automatically >configure the card. If you are using something other than the RJ-45 interface, change the interface specification from autodetect to whatever >you are using. You might want to consider specifying the interface even if autodetect appears to be guessing right. >If this is not the only LAN card in your box, let 3c5x9cfg try to configure your card but check for conflicts. When I do this, I have a hardcopy of >demsg to compare the tool's selections against. Again, watch out for the selection of the physical lan interface plug that it is coming up with. >If you have another FreeBSD box on the same wire, I'm assuming you are not using a switched hub, having a TCPDUMP going at the same >time you try to ping can give you a clue if you are making it out onto the wire. >I've had good luck with the 3Com cards at home and at work. They do have their quirks though. >Cheers... -----Original Message----- From: "Terry Thomas" To: Date: Fri, 28 Dec 2001 14:17:10 -0800 Subject: Re: 3c509 nic, kernel, resulting confusion??? Correction: It will ping 127.0.0.1 with a 7% loss but ping takes a long time to start, pings to outside or my router come back 'send to: host is down' ----- Original Message ----- From: "printery-blkft" To: Sent: Friday, December 28, 2001 1:53 PM Subject: 3c509 nic, kernel, resulting confusion??? > I'm running 4.4 stable with a 3c509c nic, i've csvuped and went thru > buildworld, etc. with no errors and i've been trying to get it set up for > over a week now and i've not been successful. > I have a 56k frame with 16 ip#'s and a rh box connected to a cisco router > that's up and i'm trying to get my fbsd box hooked via the switch to it too > but it won't even ping 127.0.0.1 > here's what i have set so far, maybe someone can help?? > > in etc/rc.conf i've added... > ifconfig_ep0="inet xxx.xxx.xxx.67" netmask="255.255.255.240" > defaultrouter="xxx.xxx.xxx.65" > > device ep0 isn't in /dev and i've tried to add it with > /dev/MAKEDEV ep0 > but it says device not present > > ifconfig -a gives me... > ep0: flags=8843 mtu 1500 > inet xxx.xxx.xxx.67 netmask 0xfffffff0 broadcast xxx.xxx.xxx.79 > inet6 fe80::260:8f:fe20:1cca%ep0 prefixlen 64 scopeid 0x1 > ehter 00:60:08:20:1c:ca > media: Ethernet 10baseT/UTP > > netstat -rn gives me... > 127.0.0.1 127.0.0.1 UH 0 0 lo0 > xxx.xxx.xxx.64/28 link#1 UC 1 0 ep0 > Internet6 has these lines... > fe80::%ep0/64 link#1 UC ep0 > ff02::%ep0/32 link#1 UC ep0 > > dmesg has... > ep0: <3com 3c509-combo etherlink III at port 0x210 irq 11 on isa0 > ep0: > etc/resolv.conf is... > 127.0.0.1 localhost.xxxxx.com localhost > xxx.xxx.xxx.67 ns2.xxxxx.com ns2 > xxx.xxx.xxx.67 ns2.xxxxx.com. > > etc/hosts is... > domain xxxxx.com > nameserver xxx.xxx.xxx.66 (my redhat dns) > nameserver xxx.xxx.xx.3 (my isp nameserver) > > > What am I doing wrong??? or What am I missing? > Needless to say, I'm new at this! I was able to setup ppp with no problem > but this ethernet/nic thing has me stumped! > > Thank You, > Terry Thomas > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message Try not. Do or do not. There is no try. -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 7:50:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 33F5237B405 for ; Sat, 29 Dec 2001 07:50:32 -0800 (PST) Received: from barbish ([63.70.155.124]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Sat, 29 Dec 2001 10:52:46 -0500 From: "Joe & Fhe Barbish" To: , "Simon 'corecode' Schubert" Cc: "FBSD Questions" Subject: RE: IPFW rc.firewall Date: Sat, 29 Dec 2001 10:50:24 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20011229130734.596f3a12.corecode@corecode.ath.cx> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After spending a day on this problem after posting the original post, I worked out my own solution that address the dynamic IP addresses. onet="65.75.155.1/24" # dynamic IP address range issued by my ISP omask="65.75.155.0" # mask = 65.75.155.0 thru 65.75.155.255 Now even if user ppp -ddial has to redial my ISP after boot up my ipfw rules will still protect me as I have told ipfw to use the whole class c range of IP address my ISP uses for dynamic allocation. Thanks to all of you who responded. Joe -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Simon 'corecode' Schubert Sent: Saturday, December 29, 2001 7:08 AM To: Joe & Fhe Barbish Cc: questions@FreeBSD.ORG Subject: Re: IPFW rc.firewall On Fri, 28 Dec 2001 11:19:38 -0500 "Joe & Fhe Barbish" wrote: > I reviewed your tutorial. I see that it's a copy of the > rc.firewall file with the symbolic variables for the > "simple" network filled in for your environment. You have > the second statement under the comments #stop spoofing > commented out because in a user ppp dialout to the ISP you > are getting dynamic IP's and this rule needs {onet) & {omask) > a static IP value, which you don't have because it always > changes each time you dial your ISP. > > # Stop spoofing > ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif} > # ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif} well, yes, kinda... :) in the first place i disabled it to enable spoofing from inside ;] but you are right, without knowledge of the onet (which is pretty much 0/0) this rule doesn't work. > I am in this same situation. I think there is a way to get > the info needed for {onet} & {omask}. The rc.conf file controls > the startup sequence of FBSD functions. If user ppp statements > come before the IPFW statements in rc.conf then FBSD will know > the dynamic IP address before IPFW starts. this is only the reason if you just dial out once the system starts. if you dial out later your ip changes but the ruleset doesn't get loaded. if you want to set the rules according to your current ip address you could use a /etc/ppp/linkup script that resets the ipfw ruleset. but with my ruleset this is not needed. i wrote it just with the use of ... via ${oif} and ... keep-state i think this is a pretty good ruleset (for nat'ed users) but it has a disadvantage: connections time out if not used (because of the keep-state). but i don't mind much about this stuff as i can live with it and it improves the security (well i think it does). cheerz corecode -- /"\ http://corecode.ath.cx/ \ / \ ASCII Ribbon Campaign / \ Against HTML Mail and News To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 8: 6:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 5A1B637B405 for ; Sat, 29 Dec 2001 08:06:32 -0800 (PST) Received: from barbish ([63.70.155.124]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Sat, 29 Dec 2001 11:08:50 -0500 From: "Joe & Fhe Barbish" To: "FBSD Questions" Subject: ipfw commands Date: Sat, 29 Dec 2001 11:06:30 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I created a file containing my add statements. What is the ipfw command to load this file after ipfw has been started at boot up? The FBSD handbook says that you can tell ipfw to create a rules file from it's internal table using the ipfw list command. What is the format of to ipfw command to generate the rules file? Why does the output from the ipfw list command look different from what the rules look like going in? Is there some option to get the list rules command to list the rules like they were entered? I do not have line numbers on my add rule statement. The rules seem to work correctly. Are the line numbers necessary? Are there any commonly used ipfw command options that you think I would benefit knowing of? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 8:15:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 7A61C37B41A for ; Sat, 29 Dec 2001 08:15:20 -0800 (PST) Received: from 1cust217.tnt3.tucson.az.da.uu.net ([63.11.144.217] helo=earthlink.net) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KM8k-0002tp-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 08:15:19 -0800 Message-ID: <3C2DEC28.8030605@earthlink.net> Date: Sat, 29 Dec 2001 09:15:36 -0700 From: Neil User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.6) Gecko/20011215 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Re: XKB keymap References: <3C1E1822.3080700@earthlink.net> <3C1F3E8B.1060108@earthlink.net> <3C1FF80C.6050809@earthlink.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, here's the solution, although I don't know why it is necessary or how the misplacement came to be: rename the directory: /usr/X11R6/lib/X11/xkb copy the directory: /etc/X11/xkb to /usr/X11R6/lib/ This solution was discovered by a user: Pierre Caruel (caruel@supaero.fr) Is this something that needs to be fixed? It seems to be a common problem as the problem seems to be posted all over the Internet, but there seems to be no solutions. Neil wrote: > Let's put it another way: The man page on setxkbmap says: > "An XKB keymap is constructed from a number of components which are > compiled only as needed." > > How does one go about making sure they are compiled and/or installed? > > > Neil wrote: > >> Here's a followup: Starting XFree86, I have this line: >> Couldn't load XKB keymap, falling back to pre-XKB keymap. >> >> Does this help? >> >> Neil wrote: >> >>> In XFree86-4.1.0_6 (installed from the FreeBSD 4.4 release CD.) >>> Here is the (xterm) readout: >>> >>> >>> $ setxkbmap us >>> Couldn't interpret _XKB_RULES_NAMES property >>> Use defaults: rules - 'xfree86' model - 'pc101' layout - 'us' >>> setxkbmap in free(): warning: junk pointer, too high to make sense. >>> Couldn't find rules file (xfree86) >>> $ >>> >>> I cannot figure out how to change the keyboard layout in XFree86 >>> >>> other XFree commands work fine, like "xset." >>> >>> Here is some relevant background: >>> >>> A week or so ago, I installed FreeBSD 4.4 from the exact same CDs >>> onto this exact same computer and used the exact same XF86Config >>> file. The "setxkbmap" feature worked just fine. >>> >>> Since I couldn't get the sound to work as well as it had on FreeBSD >>> 4.3 release, I dicided to reinstall. >>> >>> The only difference I can think I made on the second install is the >>> following: >>> >>> FIRST INSTALL: >>> I set the console keymap to US-Dvorak during the install, and I >>> installed XFree86-4.1.0_6 in the same session. >>> >>> recall that setxkbmap worked in this install >>> >>> SECOND INSTALL: >>> I set the console keymap to US-Dvorak during the install - as before; >>> but I installed XFree86-4.1.0_6 off the cd after I rebooted. >>> >>> recall that setxkbmap does not work in this install. >>> >>> >>> current probably relevant packages: >>> $ pkg_info|grep X11 >>> XFree86-4.1.0_6 X11R6.4/XFree86 core distribution (complete) >>> blackbox-0.61.1 A small and fast window manager for X11R6 >>> gtk-1.2.10_2 Gimp Toolkit for X11 GUI >>> kdebase-2.2_2 Base modules for the KDE integrated X11 desktop >>> kdegames-2.2 Games for the KDE integrated X11 desktop >>> kdegraphics-2.2 Utilities for the KDE integrated X11 desktop >>> kdemultimedia-2.2 Utilities for the KDE integrated X11 desktop >>> kdeutils-2.2 Utilities for the KDE integrated X11 desktop >>> open-motif-2.1.30_1 Motif X11 Toolkit (industry standard GUI (IEEE >>> 1295)) >>> xv-3.10a_2 An X11 program that displays images of various >>> formats >>> $ >>> >>> >>> All I want is a way to fix this feature without having to reinstall >>> again. Does anybody know how to fix it? I am hoping I don't have to >>> download the source and compile. I have only a 56 k modem. >>> >>> >>> To Unsubscribe: send mail to majordomo@FreeBSD.org >>> with "unsubscribe freebsd-questions" in the body of the message >>> >> >> >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 8:22:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id D789637B419 for ; Sat, 29 Dec 2001 08:22:55 -0800 (PST) Received: from 1cust217.tnt3.tucson.az.da.uu.net ([63.11.144.217] helo=earthlink.net) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KMG7-0000mI-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 08:22:55 -0800 Message-ID: <3C2DEDF2.6010605@earthlink.net> Date: Sat, 29 Dec 2001 09:23:14 -0700 From: Neil User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.6) Gecko/20011215 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: webcam Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG regarding a thread about webcams on freebsd; I used the BookTree driver to configure a webcam on my box. I wrote it up and posted it at http://home.earthlink.net/~neshort/webcamadventure.html I modified the documented script as follows in order to save each shot for further review. #!/bin/sh cd /usr/webcam while(echo "") do camserv cp webcam.jpg `date "+%y-%m-%d-%H-%M"`.jpg lukemftp -u ftp://neshort:password@ftp-www.earthlink.net/ webcam.jpg currentscreen.jpg sleep 120 done To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 8:25:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-2.enteract.com (smtp-2.enteract.com [207.229.143.4]) by hub.freebsd.org (Postfix) with ESMTP id B7FFD37B41A for ; Sat, 29 Dec 2001 08:25:11 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-2.enteract.com (Postfix) with ESMTP id E595979CA; Sat, 29 Dec 2001 10:25:05 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBTGOOu05228; Sat, 29 Dec 2001 10:24:24 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: Mark Rowlands Cc: Nils Holland , freebsd-questions@FreeBSD.ORG Subject: Re: Problem with new KDE 2.2.2 port? References: <20011204151653.M2254-100000@jodie.ncptiddische.net> <20011205072526.E48F237B405@hub.freebsd.org> From: James McNaughton Date: 29 Dec 2001 10:24:23 -0600 In-Reply-To: <20011205072526.E48F237B405@hub.freebsd.org> Message-ID: <86bsgim1u0.fsf@jamestown.21stcentury.net> Lines: 6 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG FYI, I recall reading recent postings indicating that autoconf and automake are somehow involved in KDE build failures. Try searching the miling list archives. I didn't save the messages so I can't quote them. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9: 0:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f192.law9.hotmail.com [64.4.9.192]) by hub.freebsd.org (Postfix) with ESMTP id 3384F37B41A for ; Sat, 29 Dec 2001 09:00:32 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 29 Dec 2001 09:00:32 -0800 Received: from 65.30.229.190 by lw9fd.law9.hotmail.msn.com with HTTP; Sat, 29 Dec 2001 17:00:31 GMT X-Originating-IP: [65.30.229.190] From: "Joe Parks" To: freebsd-questions@freebsd.org Subject: can I re-label partitions on the fly with sysinstall ? Date: Sat, 29 Dec 2001 10:00:31 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Dec 2001 17:00:32.0105 (UTC) FILETIME=[5354FD90:01C1908A] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a machine with two disks, first disk has a 1gig root, then a 7gig /mnt/data partition. Second disk has a 200meg /var and 128meg swap, then a 7.5gig /mnt/data2 partition. --- I would like to start /stand/sysinstall over ssh (machine is in a different state) and split each of the two /mnt/dataX partitions into multiple 1gig /mnt/dataX partitions. So the / partition on the first disk will not change, and the /var and swap partitions on the second disk will not change - I plan on not having any downtime associated with this - I will just delete each of the two ~7 gig data partitions and make 7 ~1gig data partitions in their place. --- So first off, is this reasonable ? Can I safely use /stand/sysinstall on a running machine to relabel the disks ? Second, will this new labeling scheme be in effect immediately after exiting /stand/sysinstall, or will I need to reboot ? Will I need to manaully edit things like /etc/fstab ? Or will sysinstal l do this for me. Third, how should I _commit_ the change ? Should I press 'w' in the label screen (for write) and then just quit out of sysinstall ? Or is it more elaborate than that ? Finally, I started /stand/sysinstall, went to 'custom' and went to 'label' and was surprised to see in the "mount point" column for each partition the word "none" - why does the custom label function in sysinstall not know the label names of my partitions ? Any other comments/suggestions appreciated. thanks! _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9: 2:52 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-1.enteract.com (smtp-1.enteract.com [207.229.143.33]) by hub.freebsd.org (Postfix) with ESMTP id 271CD37B41A for ; Sat, 29 Dec 2001 09:02:50 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-1.enteract.com (Postfix) with ESMTP id 56ADB6348; Sat, 29 Dec 2001 11:02:49 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBTH2Th05267; Sat, 29 Dec 2001 11:02:30 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: Cc: "Richard Drinkwater" , "freebsd-questions" Subject: Re: moving files for web References: <200112062302.AA3269787774@florida-wireless.com> From: James McNaughton Date: 29 Dec 2001 11:02:28 -0600 In-Reply-To: <200112062302.AA3269787774@florida-wireless.com> Message-ID: <86r8pekli3.fsf@jamestown.21stcentury.net> Lines: 24 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "brain_damaged" writes: > No what I want to do is move the entire directory(ies) to a different > partion. Not the virtuals or setup virtuals. > > i want to store the http data on the /home/whatever > not on /usr/local/www/htdocs. > While I am not a unix guru I assume there is more than just moving the > files over to it and changing In order to move the whole tree you can try cd /usr/local tar -cf - www | tar -p -C /home -xf - This will copy the entire www tree with the same permissions etc. to /home. I would make sure the new setup works before I removed /usr/local/www. I don't know anything about how your httpd is setup so I'll leave that advice for others. BTW, read man tar to double check my memory... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:12:30 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id 7E3C537B41A for ; Sat, 29 Dec 2001 09:12:28 -0800 (PST) Received: from phreaker.net (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id E50573320C for ; Sat, 29 Dec 2001 16:56:49 +0000 (UTC) Received: from randy.ies.net (isdnppp-250.vestfold.net [217.65.226.250]) by zagnut.hotpop.com (Postfix) with ESMTP id E7A1150013 for ; Sat, 29 Dec 2001 16:56:48 +0000 (UTC) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Sat, 29 Dec 2001 18:02:36 +0100 (CET) Reply-To: webdude@phreaker.net, ies@runbox.no Organization: Private From: webdude@phreaker.net To: freebsd-questions@freebsd.org Subject: Reliable PCMCIA NIC for FreeBSD 4.4 stable? X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all! I'm looking for a reliable PCMCIA 10/100 16bit NIC for my laptop, a Toshiba Satellite 4080XCDT w/ PII 366 CPU and 96 MB RAM, running FreeBSD 4.4 Stable. Read through HARDWARE.TXT and found several, but after some more research, read about configuration problems with many. Can somebody recommend a working, reasonably priced card that won't require source code tweaking or give me headaches for days on end before I get it to work? Many thanks for any suggestions! -- best regards, Inge Eidsæther Syvertsen webdude@phreaker.net *** If an electronic circuit cannot fail, it will. (Murphys Law) *** (XFMail 1.5.1 on XFree86 4.1.0 running FreeBSD 4.4STABLE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:12:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from shemp.palomine.net (shemp.palomine.net [216.135.64.135]) by hub.freebsd.org (Postfix) with SMTP id CCFDC37B425 for ; Sat, 29 Dec 2001 09:12:47 -0800 (PST) Received: (qmail 83447 invoked by uid 1000); 29 Dec 2001 17:12:41 -0000 Date: Sat, 29 Dec 2001 12:12:41 -0500 From: Chris Johnson To: questions@freebsd.org Subject: syslogd blocking => can't su to root Message-ID: <20011229121241.A83423@palomine.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="pWyiEgJYm5f9v55/" Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --pWyiEgJYm5f9v55/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I discovered this morning that I was unable to su to root, though I had been able to last night. After I enter the password (whether it is correct or incorrect), su just hangs. This is on a FreeBSD 4.4-RELEASE box. The problem seems to be that syslogd is blocking when it tries to write to /dev/console (I'm using a regular, not a serial, console). Another symptom of what I think may be the same problem is that nothing has been written in /var/log/messages for about seven days. The box has been running for eleven days. /var/log/dmesg.today does, however, have more recent entries in it. I'm no syslogd expert, but I suspect that some buffer that syslogd writes to is full, so it's blocking, so su blocks waiting for syslogd to accept its message (or something vaguely along those lines). The syslog conf files are those that were installed by mergemaster. I haven't edited them in any way. The only thing that's non-default is that I'm using -ss instead of -s when I start syslogd. The disk isn't full, there are plenty of inodes, etc. Questions: 1. What might have caused this behavior? I've never seen it on any of the dozens of FreeBSD boxes I've administered over a period of several years. 2. Can I kill syslogd and restart it to solve my immediate problem? 3. What can I do to keep it from happening again? 4. Is there any way to fix the problem remotely? I suspect not, but I can have someone sit down at a console to fix it in a few days. Thanks! Chris Johnson --pWyiEgJYm5f9v55/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8LfmHyeUEMvtGLWERAlLEAKC9p8uMSLScsBgciYEOjMYbonPV8gCeO+wq WrFbCUFGh8LEy9L1WqUBcLA= =Ql5i -----END PGP SIGNATURE----- --pWyiEgJYm5f9v55/-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:13:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id 804C537B422 for ; Sat, 29 Dec 2001 09:13:22 -0800 (PST) Received: from phreaker.net (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id 867B9348CD for ; Sat, 29 Dec 2001 16:56:44 +0000 (UTC) Received: from randy.ies.net (isdnppp-250.vestfold.net [217.65.226.250]) by zagnut.hotpop.com (Postfix) with ESMTP id EF24F5001E for ; Sat, 29 Dec 2001 16:56:42 +0000 (UTC) Message-ID: X-Mailer: XFMail 1.5.1 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Sat, 29 Dec 2001 18:02:19 +0100 (CET) Reply-To: webdude@phreaker.net, ies@runbox.no Organization: Private From: webdude@phreaker.net To: freebsd-questions@freebsd.org Subject: Can fetchmail download headers only ? X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all! Does anybody know how I can get fetchmail to download only the headers of any new mail on my POP account? Read the fetchmail FAQ, found nothing... Do I have to use a different approach to this? -- best regards, Inge Eidsæther Syvertsen webdude@phreaker.net *** If an electronic circuit cannot fail, it will. (Murphys Law) *** (XFMail 1.5.1 on XFree86 4.1.0 running FreeBSD 4.4STABLE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:18:12 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-2.enteract.com (smtp-2.enteract.com [207.229.143.4]) by hub.freebsd.org (Postfix) with ESMTP id 3982637B405 for ; Sat, 29 Dec 2001 09:18:07 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-2.enteract.com (Postfix) with ESMTP id 9573D5DBA; Sat, 29 Dec 2001 11:18:06 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBTHHko05345; Sat, 29 Dec 2001 11:17:46 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: David Kirchner Cc: Drew Tomlinson , Subject: Re: How to Use Find To Remove Files? References: <20011206151756.D15780-100000@localhost> From: James McNaughton Date: 29 Dec 2001 11:17:40 -0600 In-Reply-To: <20011206151756.D15780-100000@localhost> Message-ID: <86n102kksr.fsf@jamestown.21stcentury.net> Lines: 26 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG David Kirchner writes: > On Thu, 6 Dec 2001, Drew Tomlinson wrote: > > > Now what I want to do is remove those files so I've tried (find . -name > > "CVS" -ok "rm {}";) and various versions of the command but can't get > > the syntax right. How should I construct this command? > > find . -name "CVS" -delete > > works on FreeBSD's find. > But if he wants confirmation with the -ok primary then find . -name CVS -ok rm \{\} \; is the one to use. The original problem is that the final ; is a special character for the shell and must be escaped by prepending it with a "\". > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:32:38 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vortex.wa4phy.net (cc449817-a.mrtnz1.ga.home.com [24.12.79.51]) by hub.freebsd.org (Postfix) with ESMTP id A794337B405 for ; Sat, 29 Dec 2001 09:32:36 -0800 (PST) Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1]) by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id fBTHWYX16741 for ; Sat, 29 Dec 2001 12:32:35 -0500 (EST) (envelope-from sam@wa4phy.net) Message-ID: <3C2DFE32.19E61C8B@vortex.wa4phy.net> Date: Sat, 29 Dec 2001 12:32:34 -0500 From: Sam Drinkard Organization: You Gotta Be Kiddin! X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-PRERELEASE i386) X-Accept-Language: en, ja MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Dump Device? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Having figured out bad tapes were blowing up any type of tape activity, I now question *which* dump device is proper to use. Have read all the stuff on dump, and the handbook entries about backups. Is it proper to use /dev/nrsa0, /dev/sa0, or what? Does it really matter ? Tnx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:41:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from vortex.wa4phy.net (cc449817-a.mrtnz1.ga.home.com [24.12.79.51]) by hub.freebsd.org (Postfix) with ESMTP id BC0A137B41E; Sat, 29 Dec 2001 09:41:23 -0800 (PST) Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1]) by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id fBTHfNX16824; Sat, 29 Dec 2001 12:41:23 -0500 (EST) (envelope-from sam@wa4phy.net) Message-ID: <3C2E0042.38F214B4@vortex.wa4phy.net> Date: Sat, 29 Dec 2001 12:41:22 -0500 From: Sam Drinkard Organization: You Gotta Be Kiddin! X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-PRERELEASE i386) X-Accept-Language: en, ja MIME-Version: 1.0 To: freebsd-questions@freebsd.org Cc: freebsd-stable@freebsd.org Subject: Broken Pipe Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can someone confirm something isn't broken in pipe? Each time I attempt to read/write thru a pipe of any siginifcant size, it breaks. Files built dec 18th from -Pre. Sam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:44:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gwdu60.gwdg.de (gwdu60.gwdg.de [134.76.98.60]) by hub.freebsd.org (Postfix) with ESMTP id F042C37B41C for ; Sat, 29 Dec 2001 09:44:15 -0800 (PST) Received: from localhost (kheuer@localhost) by gwdu60.gwdg.de (8.11.6/8.11.6) with ESMTP id fBTHi5Q30983; Sat, 29 Dec 2001 18:44:05 +0100 (CET) (envelope-from kheuer@gwdu60.gwdg.de) Date: Sat, 29 Dec 2001 18:44:04 +0100 (CET) From: Konrad Heuer To: Sam Drinkard Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Dump Device? In-Reply-To: <3C2DFE32.19E61C8B@vortex.wa4phy.net> Message-ID: <20011229183907.M30937-100000@gwdu60.gwdg.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001, Sam Drinkard wrote: > Having figured out bad tapes were blowing up any type of tape activity, > I now question *which* dump device is proper to use. Have read all the > stuff on dump, and the handbook entries about backups. Is it proper to > use /dev/nrsa0, /dev/sa0, or what? Does it really matter ? /dev/nsa0 will not rewind, /dev/sa0 will rewind before writing; /dev/rsa0 and /dev/nrsa0 are raw devices for byte-oriented i/o, while /dev/sa0 and /dev/nsa0 are block devices for block oriented i/o. Thus, you should /dev/sa0 or /dev/nsa0 with dump, depending on your wish to rewind or not before writing begins. For non-rewinding tape operations, you should take a look at the the mt utility for tape control. Best wishes Konrad Heuer Personal Bookmarks: Gesellschaft f=FCr wissenschaftliche Datenverarbeitung mbH G=D6ttingen http://www.freebsd.org Am Fa=DFberg, D-37077 G=D6ttingen http://www.daemonnews.o= rg Deutschland (Germany) kheuer@gwdu60.gwdg.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:51: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from valen.gwi.net (valen.gwi.net [207.5.128.33]) by hub.freebsd.org (Postfix) with ESMTP id 02BE937B41E for ; Sat, 29 Dec 2001 09:51:05 -0800 (PST) Received: from ABERRATION (dieselgeek.outofspec.com [207.5.188.11]) by valen.gwi.net (8.11.6/8.11.6) with SMTP id fBTHp4220514 for ; Sat, 29 Dec 2001 12:51:04 -0500 (EST) Message-ID: <00a001c19091$62905b90$fa01a8c0@ABERRATION> From: "Joshua Coombs" To: Subject: ignore me Date: Sat, 29 Dec 2001 12:51:03 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Verifying subscription, ignore me. : ) Joshua Coombs jcoombs@gwi.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 9:53:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hauan.org (dah.sharedcomm.net [205.235.129.203]) by hub.freebsd.org (Postfix) with ESMTP id 64B7937B41A; Sat, 29 Dec 2001 09:53:23 -0800 (PST) Received: from hauan.org (localhost.hauan.org [127.0.0.1]) by hauan.org (8.11.6/8.11.6) with ESMTP id fBT9wss54501; Sat, 29 Dec 2001 09:58:56 GMT (envelope-from dah@hauan.org) Message-ID: <3C2D93DE.BF7A1B87@hauan.org> Date: Sat, 29 Dec 2001 09:58:54 +0000 From: Dave X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Greg Lehey Cc: Nick Barnes , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD for home security cameras? References: <70661.1009571206@thrush.ravenbrook.com> <20011229142848.C90696@monorchid.lemis.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > Hmm. I don't have an answer for you, but I do have an interest. I > have a rather similar project: I want to install an electric gate at > the end of my driveway. Mechanically that's not a problem, but the > gate is 150 yards from the front door, and I would have to connect a > cable to the house since (really!) the longest range wireless remote > controls they can supply will do about 60 yards. So I went down there > with my laptop and wireless card and established that I still had > connection. I'm planning to install some kind of old laptop there, a > bit of custom electronics, and a TV camera, and have the gate control > connected to the network. If anybody's interested in progress, > contact me, and I'll keep you updated; it won't be fast. > > Greg I too have an intrest in this, which leads to the question.. What motion capture cameras work with FreeBSD? I have an old B/W conectix Quick Cam I want to start with Although I haven't gotten it to work yet. Are there others that work? I like the gate idea especailly using old otherwise unsed hardware. dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10: 7:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp011.mail.yahoo.com (smtp011.mail.yahoo.com [216.136.173.31]) by hub.freebsd.org (Postfix) with SMTP id 3A2ED37B419 for ; Sat, 29 Dec 2001 10:07:22 -0800 (PST) Received: from ci592716-c.valleyst1.ky.home.com (HELO Kaiser) (24.251.253.28) by smtp.mail.vip.sc5.yahoo.com with SMTP; 29 Dec 2001 18:07:21 -0000 Date: Sat, 29 Dec 2001 13:07:20 -0500 From: Donnie Jones To: freebsd-questions@freebsd.org Subject: Multiple httpd servers on LAN only one real IP Address. Message-Id: <20011229130720.3acc8802.donniejones18@yahoo.com> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey all, I've got FBSD 4.4 Release and I've configured my box as a gateway with four other computers connected to it. I would like to run separate httpd servers on 2 of the computers on the internal LAN. The problem I am seeing is that for my domains all httpd requests are sent to port 80 to the real ip address which points to my FBSD gateway. Temporarily, I've set up port redirecting from 80 on the gateway to port 80 on one of the httpd servers on the internal LAN. I do not see how I can have two domains pointing to the one ip address.... ? Is there a way I can use a different port than 80 on the gateway computer for the httpd requests and then redirect that port to the internal httpd servers? Ideally, I would like for port 13080 on the real ip address to be redirected to the first httpd server on my internal LAN and port 14080 on the real ip address to be redirected to the second httpd server on the internal LAN. Any ideas or links to information would be great. Thanks, -Donnie _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10: 7:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 8BD5037B419 for ; Sat, 29 Dec 2001 10:07:27 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KNtG-0006v2-00 for FreeBSD-questions@freebsd.org; Sat, 29 Dec 2001 18:07:26 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id 617A510E1; Sat, 29 Dec 2001 19:07:24 +0100 (CET) Date: Sat, 29 Dec 2001 19:07:24 +0100 From: Cliff Sarginson To: FreeBSD-questions@freebsd.org Subject: Re: Can I rename root? Message-ID: <20011229180724.GA3858@raggedclown.net> References: <20011229154552.B855@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229154552.B855@localhost> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 03:45:52PM +0100, Rogier Steehouder wrote: > A simple question: Can I rename root? A simple answer: Yes, but don't. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:20:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp015.mail.yahoo.com (smtp015.mail.yahoo.com [216.136.173.59]) by hub.freebsd.org (Postfix) with SMTP id 536CC37B42F for ; Sat, 29 Dec 2001 10:20:49 -0800 (PST) Received: from ci592716-c.valleyst1.ky.home.com (HELO Kaiser) (24.251.253.28) by smtp.mail.vip.sc5.yahoo.com with SMTP; 29 Dec 2001 18:20:48 -0000 Date: Sat, 29 Dec 2001 13:20:48 -0500 From: Donnie Jones To: Sam Drinkard Cc: freebsd-questions@freebsd.org Subject: Re: Multiple httpd servers on LAN only one real IP Address. Message-Id: <20011229132048.7acaaf60.donniejones18@yahoo.com> In-Reply-To: <3C2E071B.D313DDFC@vortex.wa4phy.net> References: <20011229130720.3acc8802.donniejones18@yahoo.com> <3C2E071B.D313DDFC@vortex.wa4phy.net> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001 13:10:35 -0500 Sam Drinkard wrote: > Donnie, you might take a look at xinetd. It will let you redirect > various ports. > > Sam > Thanks for the fast response, but I don't think it will work.... Correct me if I am wrong, but don't httpd requests from the net only get sent to port 80 on the real ip address? If so, all the httpd requests for my two domains would be sent to the same port 80 on the real ip address (the gateway computer). I don't see how this could allow for me to redirect the httpd requests for the two individual domains to the two individual httpd servers on the internal LAN? Thanks, -Donnie _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:28:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hauan.org (dah.sharedcomm.net [205.235.129.203]) by hub.freebsd.org (Postfix) with ESMTP id E99AD37B416 for ; Sat, 29 Dec 2001 10:28:23 -0800 (PST) Received: from hauan.org (localhost.hauan.org [127.0.0.1]) by hauan.org (8.11.6/8.11.6) with ESMTP id fBTAXSs54533; Sat, 29 Dec 2001 10:34:01 GMT (envelope-from dah@hauan.org) Message-ID: <3C2D9BF8.D3F8218@hauan.org> Date: Sat, 29 Dec 2001 10:33:28 +0000 From: Dave X-Mailer: Mozilla 4.78 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Donnie Jones Cc: Sam Drinkard , freebsd-questions@FreeBSD.ORG Subject: Re: Multiple httpd servers on LAN only one real IP Address. References: <20011229130720.3acc8802.donniejones18@yahoo.com> <3C2E071B.D313DDFC@vortex.wa4phy.net> <20011229132048.7acaaf60.donniejones18@yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think you want to use the listen and bind features in httpd.conf. Choose your ports and listen on them. I'm working the same issue. dave Donnie Jones wrote: > > On Sat, 29 Dec 2001 13:10:35 -0500 > Sam Drinkard wrote: > > > Donnie, you might take a look at xinetd. It will let you redirect > > various ports. > > > > Sam > > > > Thanks for the fast response, but I don't think it will work.... > > Correct me if I am wrong, but don't httpd requests from the net only get sent to port 80 on the real ip address? > > If so, all the httpd requests for my two domains would be sent to the same port 80 on the real ip address (the gateway computer). > > I don't see how this could allow for me to redirect the httpd requests for the two individual domains to the two individual httpd servers on the internal LAN? > > Thanks, > > -Donnie > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:30:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.cadvantage.com (mail.cadvantage.com [209.184.63.3]) by hub.freebsd.org (Postfix) with ESMTP id 0B10737B416 for ; Sat, 29 Dec 2001 10:30:12 -0800 (PST) Received: from mail.carrollsweb.com [209.184.63.1] by mail.cadvantage.com with ESMTP (SMTPD32-6.06) id AE1612A30138; Sat, 29 Dec 2001 12:40:22 -0600 Received: from n6rej [64.216.104.142] by mail.carrollsweb.com (SMTPD32-6.06) id AA672F401E0; Sat, 29 Dec 2001 10:08:07 -0600 Message-ID: <008901c19081$d45c8a60$8e68d840@n6rej> From: "N6REJ" To: "FreeBSD-Questions" Subject: remote install Date: Sat, 29 Dec 2001 09:59:41 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there anyone, or anyway, that I can do a remote installation of 4.4? I'm currently running RedHat 6.2 and its gotten messed up and I'm tired of fighting with it. I just want to move to something better. I do have access via the net to the box, but not physically as its in Calif. and I'm in Kansas. I could though, arrange for someone at the hosting site to put a floppy in. Thanks in advance Troy mailto:n6rej@carrollsweb.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:33:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-2.enteract.com (smtp-2.enteract.com [207.229.143.4]) by hub.freebsd.org (Postfix) with ESMTP id 36D7237B41E for ; Sat, 29 Dec 2001 10:33:07 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-2.enteract.com (Postfix) with ESMTP id 4A38B7DBE; Sat, 29 Dec 2001 12:33:01 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBTIWfB05624; Sat, 29 Dec 2001 12:32:42 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: devin-freebsdquestions@rintrah.org Cc: Mark Hughes , freebsd-questions@freebsd.org Subject: Re: Softupdates & fsck References: <019301c1820a$1b07e2b0$0200a8c0@mark2> <20011211070617.A51634@tharmas.rintrah.org> From: James McNaughton Date: 29 Dec 2001 12:32:39 -0600 In-Reply-To: <20011211070617.A51634@tharmas.rintrah.org> Message-ID: <86adw1lvw8.fsf@jamestown.21stcentury.net> Lines: 64 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG devin-freebsdquestions@rintrah.org writes: > > > > ad0s1a: hard error reading fsbn 656735 of 328304-328415 (ad0s1 bn 656735; > > cn 40 tn 224 sn 23) status=59 error=40 > > > > > > > > CANNOT READ: BLK 328304 > > > > CONTINUE? [yn] y > > This was on / without softupdates. The worst of your errors. > > [snip] > > > > > ** /dev/ad0s1h > > [snip] > > > UNREF FILE I=3166465 OWNER=nobody MODE=100644 > > > > SIZE=1295 MTIME=Dec 6 12:20 2001 > > > > RECONNECT? [yn] y > > lots of unreferenced files. You'll see that on the softupdates mounted partitions, > fsck is only reclaiming unused space by clearing up these unreferenced files. > > [snip] > > ** Phase 5 - Check Cyl groups > > > > FREE BLK COUNT(S) WRONG IN SUPERBLK > > > > SALVAGE? [yn] y > > > > > > > > SUMMARY INFORMATION BAD > > > > SALVAGE? [yn] y > > And here you have it. The summary info was bad. It's cleaning up the free blocks > incorrectly marked used. > > [snip] > > The rest of your file systems looked pretty much the same to me. Didn't look like they > were a "mess." Just reclaiming unused blocks as is supposed to happen with > softupdates. As others have noted, you can do this in the background in -CURRENT. > > --devin Do I understand this correctly, that -- except for the file system without softupdates -- fsck could have been skipped and the file system mounted with no serious consequences? E.g. that a huge file system could be immediately reused with only some blocks incorrectly allocated and then fsck'ed at a later, more convenient time? Assuming -STABLE and not -CURRENT. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:34: 0 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 2834837B416 for ; Sat, 29 Dec 2001 10:33:58 -0800 (PST) Received: from ppp9-229.ath.forthnet.gr Bernie_X@smtp-send.myrealbox.com [213.16.156.229] by smtp-send.myrealbox.com with Novell NIMS $Revision: 2.88 $ on Novell NetWare; Sat, 29 Dec 2001 11:33:52 -0700 Date: Sat, 29 Dec 2001 18:21:58 +0200 (EET) From: Bernie X-X-Sender: root@ To: Dave Runkle Cc: Bernie , Subject: Re: Easy Questions -- newcomer In-Reply-To: <20011228154212.N59997-100000@trittico.fiddi.com> Message-ID: <20011229182104.E3777-100000@> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanx for the tip. Checked it out and works very nicely... Bernie On Fri, 28 Dec 2001, Dave Runkle wrote: > > > 2. How can i redirect the output of 'make' in c-shell with stdout > > in one file and stderr in another? i thied this: > > make >make_stdout.txt 2>make_stderr.txt > > but i got messg ambigus redirection. i suspect that the above > > works for bash only (or maybe not). In any case, what's the > > equivalent for tcsh? > > Try script(1). It's installed with the base system, a utility to > capture each and every character that hits your screen. You'll start > it with, for instance: > > script /var/tmp/logs/buildworld-011228.log > > then go through all of your builds, and when you're done, type: > > exit > > to end the script. Now you can > > less /var/tmp/logs/buildworld-011228.log > > and view everything that happened, with full search capabilities. > See 'man 1 script' for details. > > I think Clark answered the other questions quite nicely, so there is > nothing more to add. > > Dave > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:35:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from valen.gwi.net (valen.gwi.net [207.5.128.33]) by hub.freebsd.org (Postfix) with ESMTP id B7FF437B41C for ; Sat, 29 Dec 2001 10:35:08 -0800 (PST) Received: from ABERRATION (dieselgeek.outofspec.com [207.5.188.11]) by valen.gwi.net (8.11.6/8.11.6) with SMTP id fBTIZ8q27750 for ; Sat, 29 Dec 2001 13:35:08 -0500 (EST) Message-ID: <00e801c19097$8a2de6d0$fa01a8c0@ABERRATION> Reply-To: "Predius" From: "Predius" Cc: References: <20011229130720.3acc8802.donniejones18@yahoo.com><3C2E071B.D313DDFC@vortex.wa4phy.net> <20011229132048.7acaaf60.donniejones18@yahoo.com> Subject: Re: Multiple httpd servers on LAN only one real IP Address. Date: Sat, 29 Dec 2001 13:35:07 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Why not setup a frontend proxy server that knows how to handle domain based requests (IE HTTP 1.1) that then forwards to the internal lan as appropriate? I think squid or apache can be setup to do this. Joshua Coombs ----- Original Message ----- From: "Donnie Jones" To: "Sam Drinkard" Cc: Sent: Saturday, December 29, 2001 1:20 PM Subject: Re: Multiple httpd servers on LAN only one real IP Address. > On Sat, 29 Dec 2001 13:10:35 -0500 > Sam Drinkard wrote: > > > Donnie, you might take a look at xinetd. It will let you redirect > > various ports. > > > > Sam > > > > Thanks for the fast response, but I don't think it will work.... > > Correct me if I am wrong, but don't httpd requests from the net only get sent to port 80 on the real ip address? > > If so, all the httpd requests for my two domains would be sent to the same port 80 on the real ip address (the gateway computer). > > I don't see how this could allow for me to redirect the httpd requests for the two individual domains to the two individual httpd servers on the internal LAN? > > Thanks, > > -Donnie > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:44:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.cableone.net (mail4.cableone.net [24.116.0.62]) by hub.freebsd.org (Postfix) with ESMTP id DCDC237B41A for ; Sat, 29 Dec 2001 10:44:29 -0800 (PST) Received: from cableone.net ([24.116.49.212]) by mail4.cableone.net with Microsoft SMTPSVC(5.5.1877.447.44); Sat, 29 Dec 2001 11:43:22 -0700 Message-ID: <3C2E0F07.E77DDABA@cableone.net> Date: Sat, 29 Dec 2001 12:44:23 -0600 From: Dennis White X-Mailer: Mozilla 4.78 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Mozilla mess Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Have tried repeatedly to get Netscape to run under Linux compatibility, but no luck. Experimented with Mozilla & got my /usr partition really bloated & didn't like the program too much & tried to uninstall it. Got errors which, naturally are gone now, & I forget what they said, but the long & the short is, Mozilla is gone from /var/db/pkg & I have no way to get it uninstalled properly. Anyone have any ideas I'd sure appreciate it. Please advise if I need to include any files, dmesg, etc. Thanks. Denny White To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:50:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rush.telenordia.se (mail.telenordia.se [194.213.64.42]) by hub.freebsd.org (Postfix) with SMTP id CDB8237B416 for ; Sat, 29 Dec 2001 10:50:23 -0800 (PST) Received: (qmail 19495 invoked from network); 29 Dec 2001 19:50:21 +0100 Received: from bb-62-5-36-29.bb.tninet.se (HELO there) (62.5.36.29) by mail.telenordia.se with SMTP; 29 Dec 2001 19:50:21 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: James McNaughton Subject: Re: Problem with new KDE 2.2.2 port? Date: Sat, 29 Dec 2001 19:50:20 +0100 X-Mailer: KMail [version 1.3.2] Cc: Nils Holland , freebsd-questions@FreeBSD.ORG References: <20011204151653.M2254-100000@jodie.ncptiddische.net> <20011205072526.E48F237B405@hub.freebsd.org> <86bsgim1u0.fsf@jamestown.21stcentury.net> In-Reply-To: <86bsgim1u0.fsf@jamestown.21stcentury.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011229185023.CDB8237B416@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 29 December 2001 5:24 pm, James McNaughton wrote: > FYI, I recall reading recent postings indicating that autoconf and > automake are somehow involved in KDE build failures. Try searching the > miling list archives. > > I didn't save the messages so I can't quote them. I had some problems with autoconf when it went to 2,5x. It has had a couple of updates since then. I have KDE on a couple of machines right now and have had no further problems. My last full kde build was 21-dec and I have kdelibs-2.2.2 and koffice-1.1.1,1 from the 25th dec current auto..... versions autoconf 2.52_2 (Dec 28) automake-1.5,1 (Nov 2) -- It is by caffeine alone I set my mind in motion, it is by the beans of Java that thoughts acquire speed, the hands acquire shaking, the shaking becomes a warning, it is by caffeine alone I set my mind in motion. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:52:36 2001 Delivered-To: freebsd-questions@freebsd.org Received: from gadolinium.btinternet.com (gadolinium.btinternet.com [194.73.73.111]) by hub.freebsd.org (Postfix) with ESMTP id 7829E37B41B for ; Sat, 29 Dec 2001 10:52:33 -0800 (PST) Received: from host213-123-133-254.in-addr.btopenworld.com ([213.123.133.254] helo=there) by gadolinium.btinternet.com with smtp (Exim 3.22 #8) id 16KOag-0006zN-00; Sat, 29 Dec 2001 18:52:18 +0000 Content-Type: text/plain; charset="iso-8859-1" From: Dominic Marks To: "Darren" , Subject: Re: awesome find Date: Sat, 29 Dec 2001 18:52:38 +0000 X-Mailer: KMail [version 1.3.2] References: <0f9301c19079$a2241200$6401a8c0@crotchett.com> In-Reply-To: <0f9301c19079$a2241200$6401a8c0@crotchett.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 29 December 2001 3:01 pm, Darren wrote: > I'm using bash 2.05 on FreeBSD 4.4-RELEASE. I have discovered a > feature of bash that I didn't know existed. Since there may be > others like me who did not know that this feature existed, I > thought that I'd point it out. > > Anyway, forever now, I've taken advantage of using the up arrow to > access the most recently used commands. By accident, I discovered > that if you type a character or two of what you intend to type > _AND_THEN_ press the up arrow key, bash will narrow down your > options to only the commands in your history that begin with the > same characters. Kinda like a grep/regex thing. > > In other words, if you use vi, try typing vi at the command line > and then use the up arrow. You'll see only the commands in history > that start with vi. > > Awesome. FYI: This is also the case with most good interactive shells, including the stock tcsh included with FreeBSD. > Darren > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Dominic To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:56:47 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-2.enteract.com (smtp-2.enteract.com [207.229.143.4]) by hub.freebsd.org (Postfix) with ESMTP id D219237B432 for ; Sat, 29 Dec 2001 10:56:39 -0800 (PST) Received: from jamestown.21stcentury.net (24-148-18-116.na.21stcentury.net [24.148.18.116]) by smtp-2.enteract.com (Postfix) with ESMTP id 7386A7F9C; Sat, 29 Dec 2001 12:56:33 -0600 (CST) Received: (from jtm@localhost) by jamestown.21stcentury.net (8.11.6/8.11.3) id fBTIuEV05645; Sat, 29 Dec 2001 12:56:14 -0600 (CST) (envelope-from jtm63@enteract.com) X-Authentication-Warning: jamestown.21stcentury.net: jtm set sender to jtm63@enteract.com using -f To: Nils Holland Cc: breanS , freebsd-questions@FreeBSD.ORG Subject: Re: HELP ME!!!!! References: <000101c18735$e02c4a60$0305f8d4@fukff> <20011217215934.A49666@tisys.org> From: James McNaughton Date: 29 Dec 2001 12:56:12 -0600 In-Reply-To: <20011217215934.A49666@tisys.org> Message-ID: <864rm9lusz.fsf@jamestown.21stcentury.net> Lines: 21 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nils Holland writes: > On Mon, Dec 17, 2001 at 10:57:49PM +0300, breanS stood up and spoke: > > Hi. I had problems with installation unix, help please! > > Very good and detailed information on installing and configuring FreeBSD > are available at http://www.freebsd.org/handbook/. You may want to have a > look - the handbook will certainly answer at least some of your questions. > > Greetings > Nils > > > -- > Nils Holland > Ti Systems - FreeBSD in Tiddische, Germany > http://www.tisys.org * nils@tisys.org > Or you can try http://www.freebsd.org/ru/index.html for the Russian pages. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 10:58:45 2001 Delivered-To: freebsd-questions@freebsd.org Received: from kabel203069.kabel.utwente.nl (kabel203069.kabel.utwente.nl [130.89.203.69]) by hub.freebsd.org (Postfix) with ESMTP id AD20737B405 for ; Sat, 29 Dec 2001 10:58:43 -0800 (PST) Received: by kabel203069.kabel.utwente.nl (Postfix, from userid 1000) id A2F351F91; Sat, 29 Dec 2001 19:58:38 +0100 (CET) Date: Sat, 29 Dec 2001 19:58:38 +0100 From: Rogier Steehouder To: Cliff Sarginson Cc: FreeBSD-questions@freebsd.org Subject: Re: Can I rename root? Message-ID: <20011229195838.A1357@localhost> Mail-Followup-To: Rogier Steehouder , Cliff Sarginson , FreeBSD-questions@freebsd.org References: <20011229154552.B855@localhost> <20011229180724.GA3858@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011229180724.GA3858@raggedclown.net>; from cliff@raggedclown.net on Sat, Dec 29, 2001 at 07:07:24PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 29-12-2001 19:07 (+0100), Cliff Sarginson wrote: > On Sat, Dec 29, 2001 at 03:45:52PM +0100, Rogier Steehouder wrote: > > A simple question: Can I rename root? > A simple answer: Yes, but don't. Why not? With kind regards, Rogier Steehouder -- ___ _ -O_\ // | / Rogier Steehouder //\ / \ r.j.s@gmx.net // \ <---------------------- 25m ----------------------> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:11:39 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 5D6A837B436 for ; Sat, 29 Dec 2001 11:11:28 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KOtD-0000Dt-00 for FreeBSD-questions@freebsd.org; Sat, 29 Dec 2001 19:11:27 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id B848710E1; Sat, 29 Dec 2001 20:11:25 +0100 (CET) Date: Sat, 29 Dec 2001 20:11:25 +0100 From: Cliff Sarginson To: FreeBSD-questions@freebsd.org Subject: Re: Can I rename root? Message-ID: <20011229191125.GE8698@raggedclown.net> References: <20011229154552.B855@localhost> <20011229180724.GA3858@raggedclown.net> <20011229195838.A1357@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229195838.A1357@localhost> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 07:58:38PM +0100, Rogier Steehouder wrote: > On 29-12-2001 19:07 (+0100), Cliff Sarginson wrote: > > On Sat, Dec 29, 2001 at 03:45:52PM +0100, Rogier Steehouder wrote: > > > A simple question: Can I rename root? > > A simple answer: Yes, but don't. > Why not? > Because it may break things that expect a user with UID 0 called root. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:17:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.mn.rr.com (fe6.rdc-kc.rr.com [24.94.163.53]) by hub.freebsd.org (Postfix) with ESMTP id B655437B405; Sat, 29 Dec 2001 11:17:18 -0800 (PST) Received: from [10.0.1.100] ([24.26.174.22]) by mail6.mn.rr.com with Microsoft SMTPSVC(5.5.1877.537.53); Sat, 29 Dec 2001 13:17:32 -0600 Mime-Version: 1.0 X-Sender: josh@mail.bitstream.net Message-Id: In-Reply-To: <20011229143242.D90696@monorchid.lemis.com> References: <20011229143242.D90696@monorchid.lemis.com> Date: Sat, 29 Dec 2001 13:17:31 -0600 To: Greg Lehey From: Joshua Holland Subject: Re: Weird netstat output Cc: freebsd-questions@freebsd.org Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I killed syslogd and restarted it. I'm still getting a long list like below. It's running down every port number, starting at 2930 and now is at 1030. It seems the list is just getting longer. Is there a way to clear it, and then see if it keeps reporting these connections? >On Friday, 28 December 2001 at 20:16:02 -0600, Joshua Holland wrote: >> I have a FreeBSD server, named jserver. What the heck is all this >> jserver.syslog stuff that recently appeared: >> >> netstat -a: >> >> Active Internet connections (including servers) >> Proto Recv-Q Send-Q Local Address Foreign Address (state) >> udp4 0 0 jserver.2705 jserver.syslog >> udp4 0 0 jserver.2704 jserver.syslog >> udp4 0 0 jserver.2703 jserver.syslog >> udp4 0 0 jserver.2702 jserver.syslog >> udp4 0 0 jserver.2701 jserver.syslog >> udp4 0 0 jserver.2659 jserver.syslog >> udp4 0 0 jserver.2658 jserver.syslog >> (etc) > >Looks like your syslogd has hung itself up. Try restarting it. > >Greg >-- >When replying to this message, please copy the original recipients. >If you don't, I may ignore the reply. >For more information, see http://www.lemis.com/questions.html >See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:21:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe31.law9.hotmail.com [64.4.8.88]) by hub.freebsd.org (Postfix) with ESMTP id DCE7A37B405 for ; Sat, 29 Dec 2001 11:21:54 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 29 Dec 2001 11:21:54 -0800 X-Originating-IP: [66.181.160.250] From: "a1exus" To: Subject: jail & disk quota Date: Sat, 29 Dec 2001 14:19:17 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 29 Dec 2001 19:21:54.0622 (UTC) FILETIME=[134E5DE0:01C1909E] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi I have / partition which is 54g, i create jail cell and i put all my users in there, some users start abusing space wise, so i'd put quota on them however since quota doesn't work inside of jail i gotta limit them outside of jail.. my question is, can someone suggest anything here? due to my jail users is different from not jail? i dont have any non-jail users other then myself thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:27:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from sdf.lonestar.org (ip130.c214.blk2.bel.nwlink.com [207.202.214.130]) by hub.freebsd.org (Postfix) with ESMTP id C8D5D37B419 for ; Sat, 29 Dec 2001 11:27:25 -0800 (PST) Received: by sdf.lonestar.org (8.11.6/8.11.6) id fBTJR8A22671; Sat, 29 Dec 2001 19:27:08 GMT Date: Sat, 29 Dec 2001 19:27:08 +0000 (UTC) From: Rakesh Prajapati To: Dominic Marks Cc: Darren , Subject: Re: awesome find In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001, Dominic Marks wrote: > Date: Sat, 29 Dec 2001 18:52:38 +0000 > From: Dominic Marks > To: Darren , questions@FreeBSD.ORG > Subject: Re: awesome find > > On Saturday 29 December 2001 3:01 pm, Darren wrote: > > I'm using bash 2.05 on FreeBSD 4.4-RELEASE. I have discovered a > > feature of bash that I didn't know existed. Since there may be > > others like me who did not know that this feature existed, I > > thought that I'd point it out. > > > > Anyway, forever now, I've taken advantage of using the up arrow to > > access the most recently used commands. By accident, I discovered > > that if you type a character or two of what you intend to type > > _AND_THEN_ press the up arrow key, bash will narrow down your > > options to only the commands in your history that begin with the > > same characters. Kinda like a grep/regex thing. > > > > In other words, if you use vi, try typing vi at the command line > > and then use the up arrow. You'll see only the commands in history > > that start with vi. > > > > Awesome. > > FYI: This is also the case with most good interactive shells, > including the stock tcsh included with FreeBSD. > > > Darren > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > Dominic > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Also in bash , just type in a few chars (one or more) and press TAB once and it will expand to files in that directory and pressing TAB once more and it will list all the commands/programs that start with those letters which are in $PATH. eg. ta gives me tail talk tangle tar tasklist_applet rprajapa@sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:34:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from tungsten.btinternet.com (tungsten.btinternet.com [194.73.73.81]) by hub.freebsd.org (Postfix) with ESMTP id 038C837B417 for ; Sat, 29 Dec 2001 11:34:18 -0800 (PST) Received: from host213-123-133-254.in-addr.btopenworld.com ([213.123.133.254] helo=there) by tungsten.btinternet.com with smtp (Exim 3.22 #8) id 16KPEs-0006aR-00; Sat, 29 Dec 2001 19:33:50 +0000 Content-Type: text/plain; charset="iso-8859-1" From: Dominic Marks To: Rakesh Prajapati Subject: Re: awesome find Date: Sat, 29 Dec 2001 19:34:10 +0000 X-Mailer: KMail [version 1.3.2] Cc: Darren , References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 29 December 2001 7:27 pm, Rakesh Prajapati wrote: > On Sat, 29 Dec 2001, Dominic Marks wrote: > Also in bash , just type in a few chars (one or more) and press > TAB once and it will expand to files in that directory and pressing > TAB once more and it will list all the commands/programs that start > with those letters which are in $PATH. > > eg. ta gives me > tail talk tangle tar tasklist_applet Yup. For the record, tcsh can also do this, but instead you do: > ta tail talk tangle tar -- Dominic To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 11:42: 9 2001 Delivered-To: freebsd-questions@freebsd.org Received: from poontang.schulte.org (poontang.schulte.org [209.134.156.197]) by hub.freebsd.org (Postfix) with ESMTP id 7CDB537B41E for ; Sat, 29 Dec 2001 11:42:05 -0800 (PST) Received: from tarmap.nospam.schulte.org (tarmap.schulte.org [209.134.156.198]) by poontang.schulte.org (Postfix) with ESMTP id 566F7D148C; Sat, 29 Dec 2001 13:18:58 -0600 (CST) Message-Id: <5.1.0.14.0.20011229122942.02df7248@pop3s.schulte.org> X-Sender: X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sat, 29 Dec 2001 13:18:56 -0600 To: Rob Zietlow , questions@Freebsd.org From: Christopher Schulte Subject: Re: Questions about running an IRC server In-Reply-To: <200112290945.fBT9jkJ15668@berbee.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 03:45 AM 12/29/2001 -0600, Rob Zietlow wrote: >Hi, I was wondering if anyone has any expericne running an ircd. I'm looking >at what sort of System/Connection requirements we might need. We are >looking at setting up a small network, 2-3 computers to support 15-20 users. > We'd like to have a couple servers for redundency, and to load balance. FreeBSD is an ideal choice for ircd serving. Its TCP stack is second to none, as you already know. This is helpful when you have lots of long term tcp connections pumping out time-critical packets to many clients simultaneously. I help maintain a small 8-10ish server irc (hybrid-ircd) network. It's a small group of usually < 60 users. Redundancy is achieved through: - 2 hub servers on different IP networks - all leaf client servers will roll over to the other hub should one fail - dns round robin load dispersion on irc.our-irc-network.tld Unless you want redundancy, you really need no more than one server to support the load you speak of. >Now questions are: > >1) what would be some good minimum system specs? There's not a lot of power needed to serve irc. Anything > 486 should serve you well. My hub servers are a sparc2 and IPX, and there is no discernable latency. I'd suggest a bit more for a client server, if possible. :-) Even an old P75 would probably do the job well. >2) what is network overhead going to be? Any recommended connection for our >small user base. Network usage is very minuscule. We all run on regular DSL lines, and ircd takes up probably less than 1 percent of my pipe at any time. That's with many more than your 20 estimated clients, connected to me at all times. >3) should this be run in a jailed environment (I am guessing so) At the very least create a user 'ircd' and make sure it runs as that. Root is not required as it does not need < 1024 access. I've been doing this for some time and never had any issues to date. >Any other hints, tips, ideas, or web resources would be greatly appreciated. I'm running FreeBSD 4.4 and hybrid 6.2 with the busiest client server. I built it from source, no special configure options. Unfortunately, I really have not found many helpful resources. Irc network administration seems to be taught from one admin to the next. Pull the source, install it, and start playing. By no means is it rocket science. Once it's up and running, I've found I can walk away for weeks and weeks at a time. The network literally runs itself. This is assuming your userbase is non abusive, with ours generally is. Take a look at http://www.ircd-hybrid.org/ There are of course other servers out there. >Rob --c To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 12: 7:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id E8AD837B419 for ; Sat, 29 Dec 2001 12:07:53 -0800 (PST) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id fBTK7pB24977; Sat, 29 Dec 2001 14:07:52 -0600 (CST) (envelope-from nick@rogness.net) Date: Sat, 29 Dec 2001 14:07:51 -0600 (CST) From: Nick Rogness X-Sender: nick@cody.jharris.com To: Joe & Fhe Barbish Cc: FBSD Questions Subject: Re: ipfw commands In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001, Joe & Fhe Barbish wrote: > I created a file containing my add statements. What is the ipfw command > to load this file after ipfw has been started at boot up? # ipfw rules.filename Or if you want them to load on system startup, you would add the following in /etc/rc.conf: firewall_type="rules.filename" > The FBSD handbook says that you can tell ipfw to create a rules file > from it's internal table using the ipfw list command. What is the > format of to ipfw command to generate the rules file? You are probably referring to: # ipfw list > rules.filename But that won't generate a useful rules file, because you are missing the "add" statement before each line. The lines in rules.filename should look like: add 1000 allow ip from any to any via ed0 add 1200 allow tcp from any to any 80 > > Why does the output from the ipfw list command look different from > what the rules look like going in? As stated above, you are missing the "add" option at the beginning of the line. > Is there some option to get the list rules command to list the rules > like they were entered? Not that I am aware of. You could still use `ipfw list > rules.filename` and edit the rules.filename when it is done and enter the needed "add" option at the beginning of each line. > > I do not have line numbers on my add rule statement. > The rules seem to work correctly. > Are the line numbers necessary? > No. It will add them one after the other. > Are there any commonly used ipfw command options that you think I would > benefit knowing of? > See the man page for ipfw for more usefull output. I frequently use: ipfw -a l Nick Rogness - Don't mind me...I'm just sniffing your packets To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 12:40:11 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.retemail.es (smtp04.iddeo.es [62.81.186.14]) by hub.freebsd.org (Postfix) with ESMTP id 5EC0237B641 for ; Sat, 29 Dec 2001 12:39:38 -0800 (PST) Received: from conway.localdomain ([62.174.72.168]) by smtp04.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id <20011229203936.MGVM4561.smtp04.retemail.es@conway.localdomain> for ; Sat, 29 Dec 2001 21:39:36 +0100 Date: Sat, 29 Dec 2001 21:38:32 +0100 From: F.Xavier Noria To: freebsd-questions@freebsd.org Subject: Re: Error from sendmail Message-Id: <20011229213832.2d9240b8.fxn@retemail.es> In-Reply-To: <20011229121235.GD3776@raggedclown.net> References: <20011229103330.28c661b2.fxn@isoco.com> <20011229121235.GD3776@raggedclown.net> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001 13:12:35 +0100 Cliff Sarginson wrote: : On Sat, Dec 29, 2001 at 10:33:30AM +0100, F. Xavier Noria wrote: : > I've found a console filled with messages like this one: : > : > Dec 29 10:21:08 conway sendamil[7618]: fTB9JlK07618: : rule_set=check_mail,> arg_1 = , relay = localhost : [127.0.0.1], reject=451 4.1.8> Domain of sender address biz@6x6.net : does not resolve> : "biz@6x6" has just about as much mail bounced from my system as all : the other shithead spammers put together (oh no, luckysurf.com gets : that honour). In short (I use postfix not sendmail, so I am guessing : here) it sounds like sendmail won't accept mail from fake domain : addresses according to it's rule-sets as set up out of the box : on FreeBSD. I would be happy if I were you. I think I cannot understand what is happenning because I really don't understand the role of sendmail in my system. Let me ask these basic questions: This is my computer at home, with just one real user and a dial-up connection. I use the SMTP server of my ISP to send outgoing mail, and download incoming mail from some POP3 servers with fetchmail. Whith this settings, where does sendmail intervene? Is sendmail used here just to deliver local mail (messages to root and so) and by the command line client "mail"? If I was right, how could sendmail be dealing with a message from [or to, I don't know] biz@6x6.net? I read in /etc/mail/access.sample that the default is to reject mail unless the destination is local. Does that make sense with the error reported in the first message? Sendmail keeps on reporting that error, it has being doing that all the day, how could I fix it? -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13: 6: 7 2001 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (tnt1-233.quicksilver.net.nz [202.89.142.233]) by hub.freebsd.org (Postfix) with ESMTP id 168AB37B405 for ; Sat, 29 Dec 2001 13:06:04 -0800 (PST) Received: (from jonc@localhost) by chen.org.nz (8.11.6/8.11.6) id fBTL80a00784; Sun, 30 Dec 2001 10:08:00 +1300 (NZDT) (envelope-from jonc) Date: Sun, 30 Dec 2001 10:07:59 +1300 From: Jonathan Chen To: Dennis White Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Mozilla mess Message-ID: <20011230100759.A246@grimoire.chen.org.nz> References: <3C2E0F07.E77DDABA@cableone.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3C2E0F07.E77DDABA@cableone.net>; from dennyboy@cableone.net on Sat, Dec 29, 2001 at 12:44:23PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 12:44:23PM -0600, Dennis White wrote: > Have tried repeatedly to get Netscape to run under Linux > compatibility, but no luck. Experimented with Mozilla & got > my /usr partition really bloated & didn't like the program too > much & tried to uninstall it. Got errors which, naturally are > gone now, & I forget what they said, but the long & the short > is, Mozilla is gone from /var/db/pkg & I have no way to get > it uninstalled properly. # rm /usr/X11R6/bin/mozilla # rm -r /usr/X11R6/lib/mozilla -- Jonathan Chen ---------------------------------------------------------------------- Computers are like air conditioners. They stop working when you open Windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13: 8:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 0303A37B41A for ; Sat, 29 Dec 2001 13:08:22 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBTL8IR75215; Sat, 29 Dec 2001 22:08:18 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <000401c190ac$f0ee7aa0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Cliff Sarginson" , References: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> <20011229122459.GE3776@raggedclown.net> Subject: Re: Teaching parents UNIX Date: Sat, 29 Dec 2001 22:08:18 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Cliff writes: > One since Microsoft software is almost > single-handedly responsible for the spread > of viruses across the globe ... Microsoft software is not responsible for the spread of viruses, any more than water is responsible for the spread of cholera. The more widely used a given software product is, the more likely it is that children will write viruses intended to infect that product; but that does not make the product responsible for spreading the viruses. That would be like saying that Microsoft Word is responsible for the spread of great literature. > ... then Microsoft should be responsible enough > to give all users of their OS'es a lifetime > subscription gratis to an anti-viral service. Microsoft doesn't do this for a number of reasons, one of which is the risk of liability should an anti-virus product fail to stop a virus. Anti-virus products only stop viruses that have already infected many thousands of machines, for the most part. > Solution 2. People should accept the expense > of buying an anti-viral agent as being necessary > to the safe-keeping of the Internet. Viruses aren't common enough or caught easily enough to justify such universal precautions. > Solution 3. ISP's should be held responsible > for any of their users who spread viruses through > non-use of anti-viral agents. That would deprive them of common-carrier status, as they would be exercising control over content. There are serious consequences to such a move, and I'd recommend that ISPs avoid such actions at all costs. > This is called social-responsibility. You're overlooking the most obvious solution by far: Don't open suspicious attachments to e-mail. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13: 9:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from hms1.med.harvard.edu (hms.harvard.edu [134.174.141.114]) by hub.freebsd.org (Postfix) with ESMTP id 7D46137B41A for ; Sat, 29 Dec 2001 13:09:19 -0800 (PST) Received: from webmail.med.harvard.edu ([134.174.141.55]) by hms1.med.harvard.edu (Post.Office MTA v3.5.3 release 223 ID# 0-72053U5500L700S0V35) with ESMTP id edu for ; Sat, 29 Dec 2001 16:09:15 -0500 X-WebMail-UserID: michael_ziebell Date: Sat, 29 Dec 2001 16:02:48 -0500 From: Michael Ziebell To: freebsd-questions@freebsd.org X-EXP32-SerialNo: 00002414 Subject: standard C library implementation in FreeBSD4.4 Message-ID: <3C2CE483@webmail.med.harvard.edu> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: WebMail (Hydra) SMTP v3.61.05 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Sorry to ask what I think may be a foolish question but I have been fussing with this for a couple of weeks. I installed FreeBSD 4.4 on i386 machine and I cannot get the standard C library unix commands to operate. In particular, I need gethostbyname and gethostbyaddr for PVM (parallel virtual machine) to function in FreeBSD. I think I have not figured out how to implement these libc dependent functions. I get the message: "gethostbyname: command not found". Similarly for gethostbyaddr, gethostent etc. A quick reply to get me back on track would be much appreciated. Thank you. Michael Ziebell Department of Neurobiology 220 Longwood Ave. Boston, MA 02115 (617) 432 1729 FAX (617) 734 7557 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:10:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from harrier.prod.itd.earthlink.net (harrier.mail.pas.earthlink.net [207.217.120.12]) by hub.freebsd.org (Postfix) with ESMTP id 52A9937B41B; Sat, 29 Dec 2001 13:10:44 -0800 (PST) Received: from dialup-209.245.140.30.dial1.sanjose1.level3.net ([209.245.140.30] helo=blossom.cjclark.org) by harrier.prod.itd.earthlink.net with esmtp (Exim 3.33 #1) id 16KQkc-0002EH-00; Sat, 29 Dec 2001 13:10:43 -0800 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.3) id fBTLAdm07923; Sat, 29 Dec 2001 13:10:39 -0800 (PST) (envelope-from cjc) Date: Sat, 29 Dec 2001 13:10:39 -0800 From: "Crist J . Clark" To: Eugene Grosbein Cc: questions@FreeBSD.ORG Subject: Re: strange behavour of stock ftpd in STABLE: ports exhausion? Message-ID: <20011229131039.J93411@blossom.cjclark.org> References: <20011229170326.A98378@svzserv.kemerovo.su> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011229170326.A98378@svzserv.kemerovo.su>; from eugen@www.svzserv.kemerovo.su on Sat, Dec 29, 2001 at 05:03:26PM +0700 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 05:03:26PM +0700, Eugene Grosbein wrote: This is not really a topic for -stable. Diverted to -questions. > I use standard ftpd coming with FreeBSD 4.4-STABLE. > > My /etc/sysctl.conf contain these lines: > > net.inet.ip.portrange.hifirst=49152 > net.inet.ip.portrange.hilast=49200 > > This should restrict number of concurrent passive mode connections to 49. Why would it? > But this does much more. Suppose, a ftp client has good link to server, > 100Mb ethernet in my case. Suppose it uses passive mode and starts > to download very bug number of files sequentially, one then next then next... > It says TYPE I, PASV, RETR, TYPE I, PASV, RETR... > So, it can download 49 files in a row then server says > 425 Can't open passive connection: can't assign requested address I don't see why it would say that, but anyway... > If client does not break control connection, waits a little and > starts to download the rest of files, it can download next 49 files and so on. > > There are no other clients connected meantime. > How can this happed? Well... why wouldn't it? You get the 'can't assign requested address' error when you try to open a connection on top of an existing one. If the new TCP connection isn't trying to use an existing quartet (notice that the client changes the source port too), it should work fine. -- "It's always funny until someone gets hurt. Then it's hilarious." Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:32:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 5B9EA37B41B for ; Sat, 29 Dec 2001 13:32:37 -0800 (PST) Received: from 1cust144.tnt1.davis.ca.da.uu.net ([63.61.44.144] helo=earthlink.net) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 16KR5c-0002Yk-00; Sat, 29 Dec 2001 13:32:25 -0800 Message-ID: <3C2E3837.3020907@earthlink.net> Date: Sat, 29 Dec 2001 13:40:07 -0800 From: tipaporiello Reply-To: tipapori@earthlink.net User-Agent: Mozilla/5.0 (Windows; U; Win98; en-US; rv:0.9.2) Gecko/20010726 Netscape6/6.1 X-Accept-Language: en-us MIME-Version: 1.0 To: Cliff Sarginson Cc: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX References: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> <20011229122459.GE3776@raggedclown.net> Content-Type: multipart/alternative; boundary="------------020701090001070404090402" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --------------020701090001070404090402 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cliff Sarginson wrote: >On Sat, Dec 29, 2001 at 02:02:29PM +0800, Kathy Quinlan wrote: > >>----- Original Message ----- >>From: "Jeffrey" >> >>>So while I really don't care if a person defragments their disk, repairs >>>broken software, uninstalls old software or even updates their drivers. I >>>do care that they are not maintaining their machine to at least the point >>>that they are not attacking one of my servers. >>> >>Thi sis one of my pet gripes, I think that AV software should be free, as it >>is fine and dandy for the people with the money to buy it and protect their >>system, but the people who can not afford it, unknowingly get infected and >>spread it to the rest of the world, so what some ppl say, I would rather >>have an AV software that has one hit per day than the current 30 hits I am >>experiencing, and most of the viri are coming from ppl who either can not >>afford the fees to get the defs or do not know how to...... Maybe we should >>insist ppl pass a basic computer course before going on the internet ? ;o) >> >There are a couple of points here. >One since Microsoft software is almost single-handedly responsible for >the spread of viruses across the globe, which as pointed out above, does >affect all public services even if they use non-ms software, then >Microsoft should be responsible enough to give all users of their OS'es >a lifetime subscription gratis to an anti-viral service. > >That will not happen. > >Solution 2. People should accept the expense of buying an anti-viral >agent as being necessary to the safe-keeping of the Internet. What >happens is that many ISP's give out anti-viral software as part of the >deal on a 6 month license, and then people never bother to re-new >their subscription. > >Solution 3. ISP's should be held responsible for any of their users who >spread viruses through non-use of anti-viral agents. They should either >make it a condition of service, or themselves run a gratis anti-viral >service. > >This is called social-responsibility. Running MS software without active >anti-viral checking is the technoglogical equivalent of having sex with >strangers without using a condom. > > I believe we can imagine much more than this. Do you? Social responsibility also includes not blaming others. I think this is something our Parents taught us. -- Timothy Paporiello mailto:tipapori@earthlink.net --------------020701090001070404090402 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

Cliff Sarginson wrote:
On Sat, Dec 29, 2001 at 02:02:29PM +0800, Kathy Quinlan wrote:
----- Original Message -----
From: "Jeffrey" <jeffrey@azstarnet.com>

So while I really don't care if a person defragments their disk, repairs
broken software, uninstalls old software or even updates their drivers.  I
do care that they are not maintaining their machine to at least the point
that they are not attacking one of my servers.
Thi sis one of my pet gripes, I think that AV software should be free, as it
is fine and dandy for the people with the money to buy it and protect their
system, but the people who can not afford it, unknowingly get infected and
spread it to the rest of the world, so what some ppl say, I would rather
have an AV software that has one hit per day than the current 30 hits I am
experiencing, and most of the viri are coming from ppl who either can not
afford the fees to get the defs or do not know how to......  Maybe we should
insist ppl pass a basic computer course before going on the internet ? ;o)

There are a couple of points here.
One since Microsoft software is almost single-handedly responsible for
the spread of viruses across the globe, which as pointed out above, does
affect all public services even if they use non-ms software, then
Microsoft should be responsible enough to give all users of their OS'es
a lifetime subscription gratis to an anti-viral service.

That will not happen.

Solution 2. People should accept the expense of buying an anti-viral
agent as being necessary to the safe-keeping of the Internet. What
happens is that many ISP's give out anti-viral software as part of the
deal on a 6 month license, and then people never bother to re-new
their subscription.

Solution 3. ISP's should be held responsible for any of their users who
spread viruses through non-use of anti-viral agents. They should either
make it a condition of service, or themselves run a gratis anti-viral
ser
vice.

This is called social-responsibility. Running MS software without active
anti-viral checking is the technoglogical equivalent of having sex with
strangers without using a condom.


I believe we can imagine much more than this.  Do you?  Social responsibility also includes not blaming others.  I think this is something our Parents taught us.

--
Timothy Paporiello
mailto:tipapori@earthlink.net


--------------020701090001070404090402-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:33:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp016.mail.yahoo.com (smtp016.mail.yahoo.com [216.136.174.113]) by hub.freebsd.org (Postfix) with SMTP id 6D8A037B41D for ; Sat, 29 Dec 2001 13:33:23 -0800 (PST) Received: from dl-nas1-ssa-c8b0ccb0.p001.terra.com.br (HELO pchome) (200.176.204.176) by smtp.mail.vip.sc5.yahoo.com with SMTP; 29 Dec 2001 21:33:22 -0000 Message-ID: <003601c190b8$e2086df0$b0ccb0c8@pchome> From: "Joao Carlos" To: Subject: SOURCE ROUTING Date: Sat, 29 Dec 2001 19:33:39 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there any way that I can create routes based on the source network? I want that packets coming from network X go to the X link with the Internet, and that packets coming from network Y go to the Internet through link Y. Thanks --- Joao Carlos jcrr@ieee.org _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:40:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ptavv.es.net (ptavv.es.net [198.128.4.29]) by hub.freebsd.org (Postfix) with ESMTP id 0F0CD37B417 for ; Sat, 29 Dec 2001 13:40:55 -0800 (PST) Received: from ptavv.es.net (localhost [127.0.0.1]) by ptavv.es.net (8.10.1/8.10.1) with ESMTP id fBTLeod17540; Sat, 29 Dec 2001 13:40:50 -0800 (PST) Message-Id: <200112292140.fBTLeod17540@ptavv.es.net> To: webdude@phreaker.net, ies@runbox.no Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Reliable PCMCIA NIC for FreeBSD 4.4 stable? In-reply-to: Your message of "Sat, 29 Dec 2001 18:02:36 +0100." Date: Sat, 29 Dec 2001 13:40:50 -0800 From: "Kevin Oberman" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've never had a problem with my Xircom RE-100, but all PCcards seem to require a bit of fiddling to get them working. This is getting better and I believe that, with a CardBus bridge that supports interrupt sharing, should just work. One possible concern is that you have a Toshiba and Toshiba has its own CardBus bridge, the ToPic, which does not seem to work really well. If this is the case with your computer, you may have some real problems, although I believe that it will work with some tweaks. Your dmesg output should tell you what CardBus chip your system uses. The primary developer for PCMCIA stuff has been trying to get working system with a ToPic controller for some time, so we can hope that the problems are resolved shortly. On the whole, questions like this are better addressed to the mobile mailing list. R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman@es.net Phone: +1 510 486-8634 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:54: 6 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lycos.co.kr (catv-kwangjoo-210205028145.usr2.hananet.net [210.205.28.145]) by hub.freebsd.org (Postfix) with SMTP id 71B7C37B41A for ; Sat, 29 Dec 2001 13:52:31 -0800 (PST) Reply-To: adfree114@lycos.co.kr From: adfree114 To: Subject: [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !! Mime-Version: 1.0 Content-Type: text/html; charset="ks_c_5601-1987" Date: Sun, 30 Dec 2001 06:54:11 +0900 X-Priority: 3 X-Mailer: Mailtouch 1.0 Message-Id: <20011229215231.71B7C37B41A@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇÏ´Â ¹æ¹ý !!

[±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !!

ÄÄÀ» ¾Ë°í³ª¸é ½ºÆÔ¸ÞÀÏ °ÆÁ¤¾ÈÇÏ°í ¾ó¸¶µçÁö ¸ÞÀÏÀ» ÀÌ¿ëÇÒ ¼ö°¡ ÀÖÁö¿©~

À¥¸ÞÀÏ ¸Þ´ºÁß È¯°æ¼³Á¤À̳ª¿É¼Ç¼±Åà - ÇÊÅͼ±ÅÃÈÄ - [±¤°í]¹®±¸¸¦ ¼ö½Å°ÅºÎ¿¡ Ãß°¡ÇÏ¸é ´ÙÀ½ºÎÅÍ Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ µé¾î°£ ¸ÞÀÏ°ú ¿µ¿øÈ÷ À̺°À» ÇÒ ¼ö ÀÖ´ä´Ï´Ù..^^    (¿åÀ» Çϰųª ½Å°í¸¸À¸·Ð ÀüÇô È¿°ú°¡ ¾øÀ½)

¸ðµç À¥¸ÞÀÏ¿¡´Â ½ºÆÔÂ÷´Ü ±â´É¿Ü ½È¾îÇÏ´Â ¸ÞÀϸ¸ ¸·À» ¼ö ÀÖ´Â ±â´ÉÀÌ ÀÖÀ¸¸ç .. ¼ºÀÎ, ¼îÇÎ, CD, µ¿¿µ»ó µî... ¹Þ±â½ÈÀº ³»¿ëÀÌ µé¾î°£ °Í¸¸ °ÅºÎÇÒ ¼öµµ Àִµ¥ Á¶±Ý¸¸ ½Å°æ¾²¸é [±¤°í]¸ÞÀÏ °ÆÁ¤ ¶Ò...!! °£´ÜÇÏÁÒ...^ ^

¸¸¾à Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ ¾ø´Ù¸é º»¹®¿¡ "¼ö½Å°ÅºÎ"¶õ ¹®±¸¸¦ ÇÊÅ͸µÀ¸·Î Çغ¸¼¼¿ä ±×·³ ±¤°í¸ÞÀÏÀº ¸ø µé¾î¿À°í ÈÞÁöÅëÀ¸·Î »ç¶óÁý´Ï´Ù
 (Áï ±¤°í¸ÞÀÏÀº º»¹®¿¡ "¼ö½Å°ÅºÎ¸¦ ÇØÁÖ¼¼¿ä µî... Á˼ÛÇÕ´Ï´Ù µîÀÇ ¹®±¸°¡ ÀÖÀ¸´Ï ±× ¹®±¸¸¦ Æ÷ÇÔÇÑ °ÍÀº ¸ðµÎ ¸·¾Æ ÁÝ´Ï´Ù )

»õ·Î¿î µµ¸ÞÀÎ µî·Ï¾È³»...¹ÙÀÌ·¯½º °æ°í¾È³»...»õ·Î¿î ½Å»óÇ°À» ½Ñ °¡°Ý¿¡ ±¸ÀÔÇÒ ¼ö ÀÖ´Â ¼îÇθô...°ü±¤¾È³»...Çпø¾È³»...°¢Á¾Á¤º¸ ¼Ò½ÄÁö...¼ºÀÎ...µî...±× ¸ðµÎ¸¦ [±¤°í]¶ó°í ÇÏÁö¿ä~

±×¸®°í ¼ö½ÅÀÚµéÁß 60%°¡ ±¤°í¸ÞÀÏ¿¡ ÀÇÇØ ¼ö¸¹Àº Á¤º¸¸¦ ¾ò´Â´Ù°í ÇÕ´Ï´Ù, ¼ö¸¹Àº ±¤°íµé Áß ²À ±× Á¤º¸¸¦ ÇÊ¿ä·Î ÇÏ´Â ºÐµµ °è½Ã´Ù´Â »ç½Ç ¶§¹®¿¡ ±¤°í´Â Á¸ÀçÇÏ´Â °ÍÀÔ´Ï´Ù

±×¸®°í ÀÌ ¾î·Á¿î ½Ã´ë¿¡ »ì¾Æ³²±â À§ÇØ ¸öºÎ¸²Ä¡´Â ºÐµéÀ» À§ÇØ ÀÚ±âÁý ¹®´Ü¼ÓÀ» ÇÏ´ÂÀǹ̿¡¼­ [±¤°í] ÇÊÅ͸µ ¼±ÅÃÇϽÉÀÌ ¾î¶³·±Áö¿ä~~
±¤°íÁֵ鵵 ´õºÒ¾î »ì¾Æ°¡´Â »ç¶÷µéÀ̴ϱî¿ä

±¤°í¸¦ ÇÊ¿ä·Î ÇÏ´Â »ç¶÷¸¸ º¸±â¸¦ ¹Ù¶ó´Â ¸¶À½¿¡¼­....

¹«·á¼ºÀοµÈ­º¸±â

¹«·á¼ºÀθ¸È­º¸±â

 

  - ÃÖÈÄÀÇ Èñ¸ÁÀº ±àÁ¤ÀûÀÎ »ç°í¹æ½Ä ±×¸®°í »ç¶û... -

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:54:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lycos.co.kr (catv-kwangjoo-210205028145.usr2.hananet.net [210.205.28.145]) by hub.freebsd.org (Postfix) with SMTP id B236437B420 for ; Sat, 29 Dec 2001 13:53:02 -0800 (PST) Reply-To: adfree114@lycos.co.kr From: adfree114 To: Subject: [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !! Mime-Version: 1.0 Content-Type: text/html; charset="ks_c_5601-1987" Date: Sun, 30 Dec 2001 06:54:42 +0900 X-Priority: 3 X-Mailer: Mailtouch 1.0 Message-Id: <20011229215302.B236437B420@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇÏ´Â ¹æ¹ý !!

[±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !!

ÄÄÀ» ¾Ë°í³ª¸é ½ºÆÔ¸ÞÀÏ °ÆÁ¤¾ÈÇÏ°í ¾ó¸¶µçÁö ¸ÞÀÏÀ» ÀÌ¿ëÇÒ ¼ö°¡ ÀÖÁö¿©~

À¥¸ÞÀÏ ¸Þ´ºÁß È¯°æ¼³Á¤À̳ª¿É¼Ç¼±Åà - ÇÊÅͼ±ÅÃÈÄ - [±¤°í]¹®±¸¸¦ ¼ö½Å°ÅºÎ¿¡ Ãß°¡ÇÏ¸é ´ÙÀ½ºÎÅÍ Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ µé¾î°£ ¸ÞÀÏ°ú ¿µ¿øÈ÷ À̺°À» ÇÒ ¼ö ÀÖ´ä´Ï´Ù..^^    (¿åÀ» Çϰųª ½Å°í¸¸À¸·Ð ÀüÇô È¿°ú°¡ ¾øÀ½)

¸ðµç À¥¸ÞÀÏ¿¡´Â ½ºÆÔÂ÷´Ü ±â´É¿Ü ½È¾îÇÏ´Â ¸ÞÀϸ¸ ¸·À» ¼ö ÀÖ´Â ±â´ÉÀÌ ÀÖÀ¸¸ç .. ¼ºÀÎ, ¼îÇÎ, CD, µ¿¿µ»ó µî... ¹Þ±â½ÈÀº ³»¿ëÀÌ µé¾î°£ °Í¸¸ °ÅºÎÇÒ ¼öµµ Àִµ¥ Á¶±Ý¸¸ ½Å°æ¾²¸é [±¤°í]¸ÞÀÏ °ÆÁ¤ ¶Ò...!! °£´ÜÇÏÁÒ...^ ^

¸¸¾à Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ ¾ø´Ù¸é º»¹®¿¡ "¼ö½Å°ÅºÎ"¶õ ¹®±¸¸¦ ÇÊÅ͸µÀ¸·Î Çغ¸¼¼¿ä ±×·³ ±¤°í¸ÞÀÏÀº ¸ø µé¾î¿À°í ÈÞÁöÅëÀ¸·Î »ç¶óÁý´Ï´Ù
 (Áï ±¤°í¸ÞÀÏÀº º»¹®¿¡ "¼ö½Å°ÅºÎ¸¦ ÇØÁÖ¼¼¿ä µî... Á˼ÛÇÕ´Ï´Ù µîÀÇ ¹®±¸°¡ ÀÖÀ¸´Ï ±× ¹®±¸¸¦ Æ÷ÇÔÇÑ °ÍÀº ¸ðµÎ ¸·¾Æ ÁÝ´Ï´Ù )

»õ·Î¿î µµ¸ÞÀÎ µî·Ï¾È³»...¹ÙÀÌ·¯½º °æ°í¾È³»...»õ·Î¿î ½Å»óÇ°À» ½Ñ °¡°Ý¿¡ ±¸ÀÔÇÒ ¼ö ÀÖ´Â ¼îÇθô...°ü±¤¾È³»...Çпø¾È³»...°¢Á¾Á¤º¸ ¼Ò½ÄÁö...¼ºÀÎ...µî...±× ¸ðµÎ¸¦ [±¤°í]¶ó°í ÇÏÁö¿ä~

±×¸®°í ¼ö½ÅÀÚµéÁß 60%°¡ ±¤°í¸ÞÀÏ¿¡ ÀÇÇØ ¼ö¸¹Àº Á¤º¸¸¦ ¾ò´Â´Ù°í ÇÕ´Ï´Ù, ¼ö¸¹Àº ±¤°íµé Áß ²À ±× Á¤º¸¸¦ ÇÊ¿ä·Î ÇÏ´Â ºÐµµ °è½Ã´Ù´Â »ç½Ç ¶§¹®¿¡ ±¤°í´Â Á¸ÀçÇÏ´Â °ÍÀÔ´Ï´Ù

±×¸®°í ÀÌ ¾î·Á¿î ½Ã´ë¿¡ »ì¾Æ³²±â À§ÇØ ¸öºÎ¸²Ä¡´Â ºÐµéÀ» À§ÇØ ÀÚ±âÁý ¹®´Ü¼ÓÀ» ÇÏ´ÂÀǹ̿¡¼­ [±¤°í] ÇÊÅ͸µ ¼±ÅÃÇϽÉÀÌ ¾î¶³·±Áö¿ä~~
±¤°íÁֵ鵵 ´õºÒ¾î »ì¾Æ°¡´Â »ç¶÷µéÀ̴ϱî¿ä

±¤°í¸¦ ÇÊ¿ä·Î ÇÏ´Â »ç¶÷¸¸ º¸±â¸¦ ¹Ù¶ó´Â ¸¶À½¿¡¼­....

¹«·á¼ºÀοµÈ­º¸±â

¹«·á¼ºÀθ¸È­º¸±â

 

  - ÃÖÈÄÀÇ Èñ¸ÁÀº ±àÁ¤ÀûÀÎ »ç°í¹æ½Ä ±×¸®°í »ç¶û... -

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:56:19 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.cableone.net (mail4.cableone.net [24.116.0.62]) by hub.freebsd.org (Postfix) with ESMTP id 75B2F37B44B for ; Sat, 29 Dec 2001 13:55:59 -0800 (PST) Received: from cableone.net ([24.116.49.212]) by mail4.cableone.net with Microsoft SMTPSVC(5.5.1877.447.44); Sat, 29 Dec 2001 14:54:35 -0700 Message-ID: <3C2E3BD6.D9BDD9C3@cableone.net> Date: Sat, 29 Dec 2001 15:55:35 -0600 From: Dennis White X-Mailer: Mozilla 4.78 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Jonathan Chen Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Mozilla mess References: <3C2E0F07.E77DDABA@cableone.net> <20011230100759.A246@grimoire.chen.org.nz> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks Jonathan. Worked fine. Everything still working too. Appreciate it. Denny White Jonathan Chen wrote: > On Sat, Dec 29, 2001 at 12:44:23PM -0600, Dennis White wrote: > > Have tried repeatedly to get Netscape to run under Linux > > compatibility, but no luck. Experimented with Mozilla & got > > my /usr partition really bloated & didn't like the program too > > much & tried to uninstall it. Got errors which, naturally are > > gone now, & I forget what they said, but the long & the short > > is, Mozilla is gone from /var/db/pkg & I have no way to get > > it uninstalled properly. > > # rm /usr/X11R6/bin/mozilla > # rm -r /usr/X11R6/lib/mozilla > > -- > Jonathan Chen > ---------------------------------------------------------------------- > Computers are like air conditioners. > They stop working when you open Windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 13:59: 8 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cody.jharris.com (cody.jharris.com [205.238.128.83]) by hub.freebsd.org (Postfix) with ESMTP id 0EDB037B638 for ; Sat, 29 Dec 2001 13:57:24 -0800 (PST) Received: from localhost (nick@localhost) by cody.jharris.com (8.11.1/8.9.3) with ESMTP id fBTLvMb26044; Sat, 29 Dec 2001 15:57:22 -0600 (CST) (envelope-from nick@rogness.net) Date: Sat, 29 Dec 2001 15:57:22 -0600 (CST) From: Nick Rogness X-Sender: nick@cody.jharris.com To: Joao Carlos Cc: questions@FreeBSD.ORG Subject: Re: SOURCE ROUTING In-Reply-To: <003601c190b8$e2086df0$b0ccb0c8@pchome> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001, Joao Carlos wrote: > Is there any way that I can create routes based on the source network? > > I want that packets coming from network X go to the X link with the > Internet, and that packets coming from network Y go to the Internet > through link Y. Your best bet is using ipfw fwd like so: ipfw add fwd $LINK_Y ip from $NET_Y to any out man ipfw for more details. Nick Rogness - Don't mind me...I'm just sniffing your packets To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14: 1:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lucifer.velosystems.net (cx144844-b.pv1.ca.home.com [24.9.137.174]) by hub.freebsd.org (Postfix) with ESMTP id EF5F337B405 for ; Sat, 29 Dec 2001 14:01:49 -0800 (PST) Received: from jeeves.velosystems.net (jeeves.velosystems.net [192.168.1.6]) by lucifer.velosystems.net (Postfix) with SMTP id 263D772684; Sat, 29 Dec 2001 14:01:49 -0800 (PST) Date: Sat, 29 Dec 2001 14:01:48 -0800 From: Steve Wingate To: "Nick Barnes" Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD for home security cameras? Message-Id: <20011229140148.58075ec7.steve@velosystems.net> In-Reply-To: <70661.1009571206@thrush.ravenbrook.com> References: <70661.1009571206@thrush.ravenbrook.com> Organization: Velosystems X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 28 Dec 2001 20:26:46 +0000 "Nick Barnes" wrote: > My house was burgled just before Christmas. Next time this happens, > it would be satisfying to present the police with pictures of the > villains in the act of carting off our TV in our wheelbarrow, or > ransacking our CD collection. I'm thinking a few cheapo cameras, > inside and out, hooked up to a server in an inaccessible spot > (e.g. the attic) or off-site, after I get a cable modem. I would > prefer FreeBSD on the server. What's the economic way of building a > system like this? Webcams are one of the few things I miss about Windows. Although it's hardly an economical choice the Axis Neteye 2100 camera may be what you want. It's a webcam with a webserver built into it based on Linux & Boa. The camera has both a modem and Ethernet port in the back; you give it an IP address and you can view the cam in a web browser. They're around $450 but maybe you can find a used one. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14: 5:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from java2.dpcsys.com (java2.dpcsys.com [206.16.184.5]) by hub.freebsd.org (Postfix) with ESMTP id 8A5A037B419 for ; Sat, 29 Dec 2001 14:05:46 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by java2.dpcsys.com (8.11.1/8.11.1) with ESMTP id fBTM5TD43162; Sat, 29 Dec 2001 14:05:29 -0800 (PST) Date: Sat, 29 Dec 2001 14:05:29 -0800 (PST) From: Dan Busarow To: "F.Xavier Noria" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Error from sendmail In-Reply-To: <20011229213832.2d9240b8.fxn@retemail.es> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Dec 29, F.Xavier Noria wrote: > On Sat, 29 Dec 2001 13:12:35 +0100 > Cliff Sarginson wrote: > > : On Sat, Dec 29, 2001 at 10:33:30AM +0100, F. Xavier Noria wrote: > : > I've found a console filled with messages like this one: > : > > : > Dec 29 10:21:08 conway sendamil[7618]: fTB9JlK07618: > : rule_set=check_mail,> arg_1 = , relay = localhost > : [127.0.0.1], reject=451 4.1.8> Domain of sender address biz@6x6.net > : does not resolve> > [...] > I think I cannot understand what is happenning because I really don't > understand the role of sendmail in my system. Let me ask these basic > questions: > > This is my computer at home, with just one real user and a dial-up > connection. I use the SMTP server of my ISP to send outgoing mail, and > download incoming mail from some POP3 servers with fetchmail. Whith this > settings, where does sendmail intervene? Is sendmail used here just to > deliver local mail (messages to root and so) and by the command line In your situation sendmail is not needed at all. You should disable it in /etc/rc.conf (sendmail_enable="NO") > client "mail"? If I was right, how could sendmail be dealing with a > message from [or to, I don't know] biz@6x6.net? Your computer must have been connected to the Internet and some spammer running a port scanner found your sendmail. He's probably trying every possible user name and that's why you see so many messages. Dan -- Dan Busarow 949 443 4172 Dana Point Communications, Inc. dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14:33:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from drex.staff.izr.com (drex.staff.izr.com [195.26.33.16]) by hub.freebsd.org (Postfix) with ESMTP id 71C4B37B41C for ; Sat, 29 Dec 2001 14:33:21 -0800 (PST) Received: by drex.staff.izr.com (Postfix, from userid 1001) id 6F9CF33788; Sat, 29 Dec 2001 22:38:01 +0000 (GMT) Date: Sat, 29 Dec 2001 22:38:01 +0000 From: Mark Drayton To: "F . Xavier Noria" Cc: freebsd-questions@freebsd.org Subject: Re: Error from sendmail Message-ID: <20011229223801.A29393@drex.staff.izr.com> Mail-Followup-To: "F . Xavier Noria" , freebsd-questions@freebsd.org References: <20011229103330.28c661b2.fxn@isoco.com> <20011229121235.GD3776@raggedclown.net> <20011229213832.2d9240b8.fxn@retemail.es> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: <20011229213832.2d9240b8.fxn@retemail.es>; from fxn@retemail.es on Sat, Dec 29, 2001 at 09:38:32PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG F . Xavier Noria (fxn@retemail.es) wrote: > On Sat, 29 Dec 2001 13:12:35 +0100 > Cliff Sarginson wrote: > > : On Sat, Dec 29, 2001 at 10:33:30AM +0100, F. Xavier Noria wrote: > : > I've found a console filled with messages like this one: > : > > : > Dec 29 10:21:08 conway sendamil[7618]: fTB9JlK07618: > : rule_set=check_mail,> arg_1 = , relay = localhost > : [127.0.0.1], reject=451 4.1.8> Domain of sender address biz@6x6.net > : does not resolve> > > : "biz@6x6" has just about as much mail bounced from my system as all > : the other shithead spammers put together (oh no, luckysurf.com gets > : that honour). In short (I use postfix not sendmail, so I am guessing > : here) it sounds like sendmail won't accept mail from fake domain > : addresses according to it's rule-sets as set up out of the box > : on FreeBSD. I would be happy if I were you. > > I think I cannot understand what is happenning because I really don't > understand the role of sendmail in my system. Let me ask these basic > questions: > > This is my computer at home, with just one real user and a dial-up > connection. I use the SMTP server of my ISP to send outgoing mail, and > download incoming mail from some POP3 servers with fetchmail. Whith > this settings, where does sendmail intervene? Is sendmail used here > just to deliver local mail (messages to root and so) and by the > command line client "mail"? If I was right, how could sendmail be > dealing with a message from [or to, I don't know] biz@6x6.net? From fetchmail(1): As each message is retrieved fetchmail normally delivers it via SMTP to port 25 on the machine it is running on (localhost), just as though it were being passed in over a normal TCP/IP link. The mail will then be delivered locally via your system's MDA (Mail Delivery Agent, usu­ ally sendmail(8) but your system may use a different one such as smail, mmdf, exim, or qmail). All the delivery- control mechanisms (such as .forward files) normally available through your system MDA and local delivery agents will therefore work. So fetchmail doesn't deliver mail to mailboxes directly, but gives it to sendmail instead. > I read in /etc/mail/access.sample that the default is to reject mail > unless the destination is local. Does that make sense with the error > reported in the first message? Sendmail keeps on reporting that error, > it has being doing that all the day, how could I fix it? No. /etc/mail/access can be used to control who can relay mail through your system. You could put a block of IP addresses in there to allow, say, your company to send mail out. This is only checked for mail going to non-local recipients, so in your case it wasn't needed as the mail was going to a local recipient (you). The mail was rejected because the sender domain (6x6.net) doesn't exist, which pretty much guarantees it to be spam. Your machine has probably done the right thing by rejecting it. I suspect you're seeing a lot of these errors as your sendmail is replying to fetchmail with a 451 error code. An SMTP error code of 4xx means "I can't accept right now, try again later". I'd guess each time fetchmail downloads the mail your sendmail rejects it with 451, causing fetchmail to leave it on the server. When fetchmail polls that server again and tries to inject the email into sendmail the whole process repeats. In fact, this is from the fetchmail source code: * 451: temporarily unable to identify sender (exim) * 452: temporary out-of-queue-space condition on the ESMTP server. * * These are temporary errors. Don't try to ship the message, * and suppress deletion so it can be retried on a future * retrieval cycle. You could fix it by: o configuring sendmail to reject with a 5xx error (meaning "I'm never going to accept this") but that's a bad idea as DNS isn't always reliable. If the FreeBSD DNS servers stopped working your machine would reject mail from freebsd.org. Not desirable. o removing this restriction from sendmail. However, you'd probably get a lot more spam this way. o accepting the mail and using procmail or similar to delete mail from non-existant domains. This may be best when you're using fetchmail. I hope I haven't confused you and don't hesitate to ask for more help. Cheers, -- Mark Drayton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14:41: 2 2001 Delivered-To: freebsd-questions@freebsd.org Received: from square.cnd.mcgill.ca (square.CND.McGill.CA [132.206.114.119]) by hub.freebsd.org (Postfix) with ESMTP id B8B5337B416 for ; Sat, 29 Dec 2001 14:40:59 -0800 (PST) Received: (from mat@localhost) by square.cnd.mcgill.ca (8.9.3/8.9.3) id RAA87000; Sat, 29 Dec 2001 17:40:46 -0500 (EST) (envelope-from mat) Date: Sat, 29 Dec 2001 17:40:46 -0500 From: Mathew Kanner To: Kevin Oberman Cc: Mathew Kanner , James McNaughton , freebsd-questions@FreeBSD.ORG Subject: Re: x11 ssh forwarding 'uses different protocol' Message-ID: <20011229174046.B60778@cnd.mcgill.ca> References: <20011228153643.A60778@cnd.mcgill.ca> <200112290113.fBT1D4d04663@ptavv.es.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: Kevin Oberman's message [Re: x11 ssh forwarding 'uses different protocol'] as of Fri, Dec 28, 2001 at 05:13:04PM -0800 Organization: I speak for myself, operating in Montreal, CANADA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Dec 28, Kevin Oberman wrote: > Have you modified /etc/ssh/sshd_config to allow this? The default > changed with OpenSSH and you now need to explicitly un-comment the > lines: > X11Forwarding yes > X11DisplayOffset 10 > > and "ForwardX11 yes" in ssh_config (or put your own config file in > your .ssh directory). I'm postive that X11 forwarding was enabled and being atempted -- I included logs to show just that. It was complaining that the auth protocol was unknown. --Mat -- Brain: Are you pondering what I'm pondering? Pinky: Well, I think so, Brain, but I can't memorize a whole opera in Yiddish. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14:41:31 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.mrf.mail.rcn.net (smtp01.mrf.mail.rcn.net [207.172.4.60]) by hub.freebsd.org (Postfix) with ESMTP id 6454E37B423 for ; Sat, 29 Dec 2001 14:41:13 -0800 (PST) Received: from 66-44-92-202.s583.tnt7.lnhva.md.dialup.rcn.com ([66.44.92.202] helo=sten.alder.net) by smtp01.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16KSA8-0003Zh-00 for freebsd-questions@FreeBSD.ORG; Sat, 29 Dec 2001 17:41:08 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Sat, 29 Dec 2001 17:40:03 -0500 Date: Sat, 29 Dec 2001 17:40:03 -0500 From: "Bob Hall" To: FreeBSD Questions Subject: Re: Teaching parents UNIX Message-ID: <20011229174003.A590@starpower.net> Mail-Followup-To: FreeBSD Questions References: <1009413895.49812ff2Tom_Parquette@myrealbox.com> <005901c18e9e$9edcc510$0a00000a@atkielski.com> <20011227185002.A619@starpower.net> <014701c18f57$14b29860$0a00000a@atkielski.com> <20011228024744.B1098@starpower.net> <01a801c18f9c$a15050b0$0a00000a@atkielski.com> <20011228175531.A575@starpower.net> <024201c19026$9709bf80$0a00000a@atkielski.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <024201c19026$9709bf80$0a00000a@atkielski.com>; from anthony@freebie.atkielski.com on Sat, Dec 29, 2001 at 06:06:34AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 06:06:34AM +0100, Anthony Atkielski wrote: > Bob writes: > > > I know people like that also. They ignore the > > broken parts and live with slow, fragmented disks > > and up to twenty five active viruses on their > > systems. The systems still run, but they limp. > > It works fine for them, even if it doesn't meet your standards of > acceptance. > > > No maintenance means no OS upgrades, no patches, > > no defragging, no running software to scan for > > or remove viruses or fix system problems, no > > editing the registry, no updating virus signatures > > (necessary to keep the system virus free), no > > remote maintenance via the LAN by the tech > > support people, no hardware upgrades, no > > reinstalling corrupted drivers or updating drivers, > > no updates to shared dlls, no service packs, > > no fixing resource conflicts when new software > > is installed, no backups, no hard drive checks, > > no updating or using repair tools, no updating or > > uninstalling apps, and no reconfiguration to > > accommodate the user's changing needs. > > Yes. And most people couldn't care less. The computer does what they want, > and none of the above matters in the least to them; they don't even know > what any of it means. That may be unthinkable to you, but they are > perfectly happy that way. I've done some on site programming, which made me the only computer-knowledgeable person in sight in some offices. I've managed disguise my elitist, high-standards attitude enough to dupe some people into believing that I was friendly and helpful. Generally, when I solved some maintenance related problem, the user was grateful. To say that people are ignoring problems doesn't mean that they're unaware that something is wrong, or are happy. They continue working with a machine that needs maintenance due to a combination of lack of knowledge and either fear of the tech support people or lack of tech support. Or because they only remember about the problem when it affects work they are doing, and then they're too busy to stop and try to get help. Or some other reason. But not because they're perfectly happy. I've spent a lot of time working surrounded by non-technical computer users, so I know how they feel about their computers. I've also seen the studies showing that computer behavior is a major source of complaints in offices. It's true that most users don't know the meaning of the items on the list above, but they definitely know the difference between a system that has been maintained and one that hasn't. And if I can be forgiven for straying onto the topic of this thread, however tangentially, this is also true for home users getting support from relatives. The more willing the maintainer is to provide maintenance, the happier the user will be with the chosen OS, given the conditions that I expressed before. Bob Hall -- Know thyself? Absurd direction! Bubbles bear no introspection. -Khushhal Khan Khatak To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14:41:46 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ottawa.com (mail.ottawa.com [209.217.94.166]) by hub.freebsd.org (Postfix) with ESMTP id 10A1A37B419 for ; Sat, 29 Dec 2001 14:41:40 -0800 (PST) Received: (from ottawa@localhost) by mail.ottawa.com (8.9.2-aidan/8.9.2) id RAA03552; Sat, 29 Dec 2001 17:57:22 -0500 (EST) Date: Sat, 29 Dec 2001 17:57:22 -0500 (EST) Message-Id: <200112292257.RAA03552@mail.ottawa.com> To: freebsd-questions@freebsd.org From: VVK Subject: JAIL problems :( HELP!!!!!! X-Account: 5901 X-Sender-IP: 66.185.84.196 Mime-Version: 1.0 Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've been running jail successfully for almost 2 years now. Today my cable company changed static configuration to DHCP one. I've reconfigured my to use DHCP, however, jail would not work. in /etc/rc.conf: ifconfig_ed0="DHCP" ifconfig_ed0_alias0="inet 192.168.0.30 netmask 255.255.255.0" ifconfig_ed1="inet 192.168.0.1 netmask 255.255.255.128" ifconfig_ed1_alias0="inet 192.168.0.10 netmask 0xffffffff" hostname="crxxxxxx-E" inetd_flags="-wW -R 1024 -a 192.168.0.30" portmap_enable="YES" nfs_client_enable="YES" nfs_reserved_port_only="YES" nfs_server_enable="YES" # using this to mount drives/directories from jail in /etc/dhclient.conf send host-name "crxxxxxxx-E"; # Put your client IP here request subnet-mask, broadcast-address, routers, domain-name-servers; now, the problem is with the following: jail works fine (SSH/TELNET/etc) when i don't have /etc/resolv.conf. however, i cannot connect to any host from jail as it cannot resolve it. as soon as i put it in with correct DNS numbers, it starts giving me hard time: connects, say, to port 22, but no SSH header is displayed and same with other daemons.. inside jail, i have the following: root@me:/home/me>>ifconfig -a ed0: flags=8843 mtu 1500 ether 00:50:ba:cd:9a:fa ed1: flags=8843 mtu 1500 inet 192.168.0.10 netmask 0xffffffff broadcast 192.168.0.10 ether 00:50:ba:cd:b9:60 lo0: flags=8049 mtu 16384 there is no address associated with ed0 (my external nic) while in host system it shows the following: ed0: flags=8843 mtu 1500 inet 24.xx.xx.247 netmask 0xffffff00 broadcast 24.xx.xx.255 ether 00:50:ba:cd:9a:fa ed1: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xffffff80 broadcast 192.168.0.127 inet 192.168.0.10 netmask 0xffffffff broadcast 192.168.0.10 ether 00:50:ba:cd:b9:60 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 output of jail: Skipping disk checks ... Doing initial network setup:. ifconfig: ioctl (SIOCDIFADDR): permission denied lo0: flags=8049 mtu 16384 Additional routing options: TCP keepalive=YESsysctl: net.inet.tcp.always_keepalive: Operation not permitted . Routing daemons:. Additional daemons: syslogd. Doing additional network setup:. Checking quotas: done. Enabling quotas: done. Starting final network daemons:. Turning on accounting: accton: /var/account/acct: Operation not permitted ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Starting standard daemons: inetd cron sshd. Initial rc.i386 initialization:. Configuring syscons: blanktime/etc/rc.syscons: cannot open /dev/ttyv0: no such file . Additional ABI support:. Starting local daemons:. Local package initialization: idled. Additional TCP options: log_in_vain=YESsysctl: net.inet.tcp.log_in_vain: Operation not permitted sysctl: net.inet.udp.log_in_vain: Operation not permitted ^^^^^^ e What might be the problem? Have you ever heard about this? Is there a fix? Would greatly appreciate any helo/hints. THANK YOU< Get your Free email at http://mail.ottawa.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 14:54:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from carbon.btinternet.com (carbon.btinternet.com [194.73.73.92]) by hub.freebsd.org (Postfix) with ESMTP id 5F32F37B405; Sat, 29 Dec 2001 14:54:19 -0800 (PST) Received: from host213-123-133-254.in-addr.btopenworld.com ([213.123.133.254] helo=there) by carbon.btinternet.com with smtp (Exim 3.22 #8) id 16KSMr-0004vW-00; Sat, 29 Dec 2001 22:54:17 +0000 Content-Type: text/plain; charset="iso-8859-1" From: Dominic Marks To: "Crist J . Clark" , Eugene Grosbein Subject: Re: strange behavour of stock ftpd in STABLE: ports exhausion? Date: Sat, 29 Dec 2001 22:54:47 +0000 X-Mailer: KMail [version 1.3.2] Cc: questions@FreeBSD.ORG References: <20011229170326.A98378@svzserv.kemerovo.su> <20011229131039.J93411@blossom.cjclark.org> In-Reply-To: <20011229131039.J93411@blossom.cjclark.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 29 December 2001 9:10 pm, Crist J . Clark wrote: > On Sat, Dec 29, 2001 at 05:03:26PM +0700, Eugene Grosbein wrote: > > This is not really a topic for -stable. Diverted to -questions. > > > I use standard ftpd coming with FreeBSD 4.4-STABLE. > > > > My /etc/sysctl.conf contain these lines: > > > > net.inet.ip.portrange.hifirst=49152 > > net.inet.ip.portrange.hilast=49200 > > > > This should restrict number of concurrent passive mode > > connections to 49. > > Why would it? Because ftpd uses these sysctls when choosing ports to use for passive connections. This is related to the -U option (see man ftpd). > > But this does much more. Suppose, a ftp client has good link to > > server, 100Mb ethernet in my case. Suppose it uses passive mode > > and starts to download very bug number of files sequentially, one > > then next then next... It says TYPE I, PASV, RETR, TYPE I, PASV, > > RETR... > > So, it can download 49 files in a row then server says > > 425 Can't open passive connection: can't assign requested address > > I don't see why it would say that, but anyway... For each passive mode transaction one of the ports in the range is consumed. When it runs out of ports to use, you get this error. > > If client does not break control connection, waits a little and > > starts to download the rest of files, it can download next 49 > > files and so on. > > > > There are no other clients connected meantime. > > How can this happed? > > Well... why wouldn't it? You get the 'can't assign requested > address' error when you try to open a connection on top of an > existing one. If the new TCP connection isn't trying to use an > existing destination port> quartet (notice that the client changes the > source port too), it should work fine. The problem is that ftpd doesn't appear to recycle the ports it uses. Ideally one client using passive mode should only ever consume a single port from the acceptable range. Eugene's problem is that ftpd is not doing this, and the server becomes unresponsive to passive mode connections after this point. (I have successfully replicated the behaviour he noticed here. Someone suggested earlier that use of the SO_REUSEADDR socket option could potentially fix this issue. However I see a number of problems with this. 1. Once a transaction is completed (such as a LIST) surely the socket used for this transaction should be immediately freed. So this would appear to be a bug (?). 2. Also, from my reading of the setsockopt manual page what SO_REUSEADDR actually does is to allow the sharing of the socket between multiple processes. If we share a socket before its current operation is complete we may cause the network streams for one, or both of the clients to be corrupted (At least, thats what I think the man page was communicating). If this is indeed a bug then I suspect the fix is related to the closing of used sockets for passive mode connections. I'm going to try investigate a little further. I'd like to point out that my knowledge of the FTP protocol or how some of the syscalls (eg: setsockopt) work in practice is not full enough for this to be considered reliably correct. finally: > With such a low number of ports available in your high port range, > yes, but there are 16383 by default, which ought to be more than > enough. The range can be made even larger if you choose. While I agree, if this is indeed a bug, it still needs fixing. Thanks -- Dominic To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 15:17:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from slacknet.slacknet.com (slacknet.slacknet.com [204.228.135.180]) by hub.freebsd.org (Postfix) with ESMTP id 3964C37B41F for ; Sat, 29 Dec 2001 15:17:53 -0800 (PST) Received: from rj45 (helo=localhost) by slacknet.slacknet.com with local-esmtp (Exim 3.12 #1 (Debian)) id 16KSjh-0005C6-00 for ; Sat, 29 Dec 2001 16:17:53 -0700 Date: Sat, 29 Dec 2001 16:17:52 -0700 (MST) From: RJ45 To: freebsd-questions@freebsd.org Subject: transparent ftp over ipnat ?? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How can I introduce a transparent ftp service to my intternal hidden LAN? is there any ready to use ftp proxy avaliable to use with ipnat? thanks Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 15:30:29 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.innovativeinternet.net (ns3.innovativeinternet.net [208.244.165.3]) by hub.freebsd.org (Postfix) with ESMTP id 0244837B41F for ; Sat, 29 Dec 2001 15:30:26 -0800 (PST) Received: from pcpsj.pfcs.com (harlan.xecu.net [216.127.150.112]) by mail.innovativeinternet.net (Postfix) with ESMTP id 011A2273E for ; Sat, 29 Dec 2001 18:30:24 -0500 (EST) Received: from brown.pfcs.com (brown.pfcs.com [192.52.69.44]) by pcpsj.pfcs.com (Postfix) with ESMTP id 6F318D365 for ; Sat, 29 Dec 2001 18:30:14 -0500 (EST) Received: from localhost.pfcs.com [127.0.0.1] (HELO brown.pfcs.com) by brown.pfcs.com (8.8.8/8.8.8) via ESMTP id for ; Sat, 29 Dec 2001 18:30:13 -0500 (EST) To: questions@freebsd.org Subject: Starting multiple copies of bind? X-Face: "csXK}xnnsH\h_ce`T#|pM]tG,6Xu.{3Rb\]&XJgVyTS'w{E+|-(}n:c(Cc* $cbtusxDP6T)Hr'k&zrwq0.3&~bAI~YJco[r.mE+K|(q]F=ZNXug:s6tyOk{VTqARy0#axm6BWti9C d User-Agent: EMH/1.10.0 SEMI/1.13.3 (Komaiko) FLIM/1.12.7 (=?ISO-8859-1?Q?Y?= =?ISO-8859-1?Q?=1B=2ED=8E=FEzaki?=) XEmacs/21.1 (20 Minutes to Nikko) (i386-unknown-freebsd2.2.8) MIME-Version: 1.0 (generated by SEMI 1.13.3 - "Komaiko") Content-Type: text/plain; charset=US-ASCII Date: Sat, 29 Dec 2001 18:30:13 -0500 Message-ID: <19312.1009668613@brown.pfcs.com> From: Harlan Stenn Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Rumor has it that it is Good Practise for folks running bind (for example) as both an NS and a resolver to separate the functionality into different processes, to avoid things like cache pollution. IE, the machines providing generic resolver capability answer on a "network visible" address, and they address queries to the local DNS server running on, say, the loopback address. I have the appropriate named.conf.master and named.conf.resolver files working. Does anybody have a clean way to start these during the boot process, or do I simply start one of them (probably the external resolver process) from /usr/local/etc/rc.d/ ? H To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 15:31:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from web21105.mail.yahoo.com (web21105.mail.yahoo.com [216.136.227.107]) by hub.freebsd.org (Postfix) with SMTP id BD01A37B416 for ; Sat, 29 Dec 2001 15:31:26 -0800 (PST) Message-ID: <20011229233126.28319.qmail@web21105.mail.yahoo.com> Received: from [65.80.52.13] by web21105.mail.yahoo.com via HTTP; Sat, 29 Dec 2001 15:31:26 PST Date: Sat, 29 Dec 2001 15:31:26 -0800 (PST) From: Jon Gable Subject: Re: Changing IPs To: John Kozubik Cc: Christopher Schulte , questions@FreeBSD.ORG In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG EXCELLANT! Thanks for the help!!! Jon --- John Kozubik wrote: > > I suspect that in your system you only need to edit: > > /etc/rc.conf > > and > > /etc/hosts > > Speaking of ftp specifically, I suspect you do not > need to change _any_ > settings for ftp. There certainly are > configurations where this would be > required, but I doubt yours is one. > > A quick way to see if there are any dependencies on > the IP address in the > standard configuration files would be to: > > `grep [your_IP] /etc/*` > > which checks to see if your current IP address is > contained in any of the > files in /etc. If after you change /etc/hosts and > /etc/rc.conf you still > see your current IP address in other files in /etc, > you should check those > too. If you need the IP now, you will probably need > it to be correct when > you change as well... > > > ----- > John Kozubik - john@kozubik.com - > http://www.kozubik.com > > > > > On Fri, 28 Dec 2001, Jon Gable wrote: > > > Thanks - This machine is using (Sendmail) Email > and > > and an FTP service. Where in world would I look > for > > the FTP section? > > > > Thanks Again - > > > > Jon > > > > > > --- Christopher Schulte > > wrote: > > > At 05:52 PM 12/28/2001 -0800, Jon Gable wrote: > > > >Just confirming: > > > > > > > >We are changing ISPs so I'll need to change my > > > FreeBSD > > > >machine running Sendmail's IP address. > > > > > > > >Is the only place I make the ip change located > in > > > the > > > >hosts file? > > > > > > No. There will be more places to make changes, > but > > > the exact details > > > depend on what services you have running. > > > > > > On one of my machines, I would have to edit: > > > > > > /etc/hosts - you got this one > > > /etc/rc.conf - where ip configuration is usually > > > stored > > > /etc/rc.firewall - my ipfw configuration > > > /etc/named/named.conf - don't forget bind > > > /usr/local/etc/dhcpd.conf - I run a dhcp server > here > > > /usr/local/apache/conf/httpd.conf - I run apache > > > /usr/local/ncftpd/conf/domain.cf - ncftpd conf > > > and so on > > > > > > Most basic systems will need to edit at least > > > /etc/hosts and > > > /etc/rc.conf. The rest really depend on your > > > machine. Any service that > > > has a static IP address in its configuration > will > > > need to be modified. > > > > > > One idea is to grep your /etc files for the IP > > > address currently > > > assigned. Most (but not necessarily all) > changes > > > are in there. > > > > > > >Thanks > > > > > > > >Jon > > > > > > --c > > > > > > > > > > > > __________________________________________________ > > Do You Yahoo!? > > Send your FREE holiday greetings online! > > http://greetings.yahoo.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body > of the message > > > __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 15:37:57 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 3B91837B405 for ; Sat, 29 Dec 2001 15:37:53 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 8D9D7786E3; Sun, 30 Dec 2001 10:07:51 +1030 (CST) Date: Sun, 30 Dec 2001 10:07:51 +1030 From: Greg Lehey To: Cliff Sarginson Cc: FreeBSD Questions Subject: Re: Does FreeBSD have a problem with some AMD processors? Message-ID: <20011230100751.A33871@monorchid.lemis.com> References: <20011228181009.F95692@monorchid.lemis.com> <20011228115744.A1908@tisys.org> <20011229105230.J48518@monorchid.lemis.com> <20011229111211.GA1777@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229111211.GA1777@raggedclown.net> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday, 29 December 2001 at 12:12:11 +0100, Cliff Sarginson wrote: > On Sat, Dec 29, 2001 at 10:52:30AM +1030, Greg Lehey wrote: >> On Friday, 28 December 2001 at 11:57:44 +0100, Nils Holland wrote: >> Interestingly, I had a very similar problem with a motherboard I tried >> exchanging while chasing this problem. On shutdown, it would not >> power off, just go into power save. I had to hold down the power >> switch for 5 seconds to power it off. > > Mmm. Isn't this a feature, not a bug ? No. If you don't shut down, it's correct. But after shutdown pressing "power off" shouldn't cause a suspend. > Ny motherboard can be configured according to how it should respond > to the ATX (soft) poweroff button. Less than 4 secs = standyby, or > poweroff according to taste. Right, I had this configured to power off. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 15:54:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id E749B37B41A for ; Sat, 29 Dec 2001 15:54:40 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KTJH-000Hhd-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 23:54:40 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id BD5CF10A2; Sun, 30 Dec 2001 00:54:38 +0100 (CET) Date: Sun, 30 Dec 2001 00:54:38 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-ID: <20011229235438.GA7709@raggedclown.net> References: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> <20011229122459.GE3776@raggedclown.net> <3C2E3837.3020907@earthlink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3C2E3837.3020907@earthlink.net> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 01:40:07PM -0800, tipaporiello wrote: > > > Cliff Sarginson wrote: > > I believe we can imagine much more than this. Do you? Social > responsibility also includes not blaming others. I think this is > something our Parents taught us. > I don't understand what you are trying to say by this. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16: 3:34 2001 Delivered-To: freebsd-questions@freebsd.org Received: from lycos.co.kr (catv-kwangjoo-210205028145.usr2.hananet.net [210.205.28.145]) by hub.freebsd.org (Postfix) with SMTP id A42FA37B41F for ; Sat, 29 Dec 2001 16:02:57 -0800 (PST) Reply-To: adfree114@lycos.co.kr From: adfree114 To: Subject: [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !! Mime-Version: 1.0 Content-Type: text/html; charset="ks_c_5601-1987" Date: Sun, 30 Dec 2001 09:04:37 +0900 X-Priority: 3 X-Mailer: Mailtouch 1.0 Message-Id: <20011230000257.A42FA37B41F@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇÏ´Â ¹æ¹ý !!

[±¤°í]¹®±¸°¡ µé¾î°£ ¸ÞÀÏÀ» 100% Â÷´ÜÇϴ¹ý !!

ÄÄÀ» ¾Ë°í³ª¸é ½ºÆÔ¸ÞÀÏ °ÆÁ¤¾ÈÇÏ°í ¾ó¸¶µçÁö ¸ÞÀÏÀ» ÀÌ¿ëÇÒ ¼ö°¡ ÀÖÁö¿©~

À¥¸ÞÀÏ ¸Þ´ºÁß È¯°æ¼³Á¤À̳ª¿É¼Ç¼±Åà - ÇÊÅͼ±ÅÃÈÄ - [±¤°í]¹®±¸¸¦ ¼ö½Å°ÅºÎ¿¡ Ãß°¡ÇÏ¸é ´ÙÀ½ºÎÅÍ Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ µé¾î°£ ¸ÞÀÏ°ú ¿µ¿øÈ÷ À̺°À» ÇÒ ¼ö ÀÖ´ä´Ï´Ù..^^    (¿åÀ» Çϰųª ½Å°í¸¸À¸·Ð ÀüÇô È¿°ú°¡ ¾øÀ½)

¸ðµç À¥¸ÞÀÏ¿¡´Â ½ºÆÔÂ÷´Ü ±â´É¿Ü ½È¾îÇÏ´Â ¸ÞÀϸ¸ ¸·À» ¼ö ÀÖ´Â ±â´ÉÀÌ ÀÖÀ¸¸ç .. ¼ºÀÎ, ¼îÇÎ, CD, µ¿¿µ»ó µî... ¹Þ±â½ÈÀº ³»¿ëÀÌ µé¾î°£ °Í¸¸ °ÅºÎÇÒ ¼öµµ Àִµ¥ Á¶±Ý¸¸ ½Å°æ¾²¸é [±¤°í]¸ÞÀÏ °ÆÁ¤ ¶Ò...!! °£´ÜÇÏÁÒ...^ ^

¸¸¾à Á¦¸ñ¿¡ [±¤°í]¶ó´Â ¹®±¸°¡ ¾ø´Ù¸é º»¹®¿¡ "¼ö½Å°ÅºÎ"¶õ ¹®±¸¸¦ ÇÊÅ͸µÀ¸·Î Çغ¸¼¼¿ä ±×·³ ±¤°í¸ÞÀÏÀº ¸ø µé¾î¿À°í ÈÞÁöÅëÀ¸·Î »ç¶óÁý´Ï´Ù
 (Áï ±¤°í¸ÞÀÏÀº º»¹®¿¡ "¼ö½Å°ÅºÎ¸¦ ÇØÁÖ¼¼¿ä µî... Á˼ÛÇÕ´Ï´Ù µîÀÇ ¹®±¸°¡ ÀÖÀ¸´Ï ±× ¹®±¸¸¦ Æ÷ÇÔÇÑ °ÍÀº ¸ðµÎ ¸·¾Æ ÁÝ´Ï´Ù )

»õ·Î¿î µµ¸ÞÀÎ µî·Ï¾È³»...¹ÙÀÌ·¯½º °æ°í¾È³»...»õ·Î¿î ½Å»óÇ°À» ½Ñ °¡°Ý¿¡ ±¸ÀÔÇÒ ¼ö ÀÖ´Â ¼îÇθô...°ü±¤¾È³»...Çпø¾È³»...°¢Á¾Á¤º¸ ¼Ò½ÄÁö...¼ºÀÎ...µî...±× ¸ðµÎ¸¦ [±¤°í]¶ó°í ÇÏÁö¿ä~

±×¸®°í ¼ö½ÅÀÚµéÁß 60%°¡ ±¤°í¸ÞÀÏ¿¡ ÀÇÇØ ¼ö¸¹Àº Á¤º¸¸¦ ¾ò´Â´Ù°í ÇÕ´Ï´Ù, ¼ö¸¹Àº ±¤°íµé Áß ²À ±× Á¤º¸¸¦ ÇÊ¿ä·Î ÇÏ´Â ºÐµµ °è½Ã´Ù´Â »ç½Ç ¶§¹®¿¡ ±¤°í´Â Á¸ÀçÇÏ´Â °ÍÀÔ´Ï´Ù

±×¸®°í ÀÌ ¾î·Á¿î ½Ã´ë¿¡ »ì¾Æ³²±â À§ÇØ ¸öºÎ¸²Ä¡´Â ºÐµéÀ» À§ÇØ ÀÚ±âÁý ¹®´Ü¼ÓÀ» ÇÏ´ÂÀǹ̿¡¼­ [±¤°í] ÇÊÅ͸µ ¼±ÅÃÇϽÉÀÌ ¾î¶³·±Áö¿ä~~
±¤°íÁֵ鵵 ´õºÒ¾î »ì¾Æ°¡´Â »ç¶÷µéÀ̴ϱî¿ä

±¤°í¸¦ ÇÊ¿ä·Î ÇÏ´Â »ç¶÷¸¸ º¸±â¸¦ ¹Ù¶ó´Â ¸¶À½¿¡¼­....

¹«·á¼ºÀοµÈ­º¸±â

¹«·á¼ºÀθ¸È­º¸±â

 

  - ÃÖÈÄÀÇ Èñ¸ÁÀº ±àÁ¤ÀûÀÎ »ç°í¹æ½Ä ±×¸®°í »ç¶û... -

To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16: 4:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cache1.hck.carroll.com (cache1.hck.carroll.com [216.44.20.19]) by hub.freebsd.org (Postfix) with ESMTP id D6DAF37B425 for ; Sat, 29 Dec 2001 16:03:37 -0800 (PST) Received: from sprig.tougas.net ([216.44.20.42] verified) by cache1.hck.carroll.com (CommuniGate Pro SMTP 3.2.4) with ESMTP id 7351582; Sat, 29 Dec 2001 19:03:36 -0500 Date: Sat, 29 Dec 2001 19:03:02 -0500 From: Damien Tougas To: Dominic Marks , Rakesh Prajapati Cc: Darren , questions@FreeBSD.ORG Subject: Re: awesome find Message-ID: <687870000.1009670581@localhost> In-Reply-To: References: X-Mailer: Mulberry/2.1.2 (Linux/x86) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --On Saturday, December 29, 2001 19:34:10 +0000 Dominic Marks wrote: > On Saturday 29 December 2001 7:27 pm, Rakesh Prajapati wrote: >> On Sat, 29 Dec 2001, Dominic Marks wrote: > > > >> Also in bash , just type in a few chars (one or more) and press >> TAB once and it will expand to files in that directory and pressing >> TAB once more and it will list all the commands/programs that start >> with those letters which are in $PATH. >> >> eg. ta gives me >> tail talk tangle tar tasklist_applet > > Yup. For the record, tcsh can also do this, but instead you do: > >> ta > tail talk tangle tar If you have "set autolist" in your .cshrc, then it will behave just the same way as bash does when you press tab, only you don't have to press tab twice to see the list. --- Damien Tougas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16: 5:32 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 11A9537B63F for ; Sat, 29 Dec 2001 16:05:20 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KTTb-000HlI-00 for freebsd-questions@freebsd.org; Sun, 30 Dec 2001 00:05:20 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id A1AF810A2; Sun, 30 Dec 2001 01:05:19 +0100 (CET) Date: Sun, 30 Dec 2001 01:05:19 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-ID: <20011230000519.GB7709@raggedclown.net> References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 03:46:29PM -0500, Oliver, Michael W. wrote: > I would suggest that Microsoft software is NOT responsible for the spread of > virii. What can software do by itself without the driving force of a human > being? I submit that ignorant/cheap/lazy/whatever users, coupled with kids > (with too much time on their hands and parents who don't know or don't care) > writing virii, are the cause of the vast majority of virus infections. That does not mean we should accept the spread of them by carelessness. > > I do not want to get into any kind of pissing match with you Cliff, because > your rabid distaste for MS products rivals any that I have seen, and I share > that view to some extent. I will let Anthony be the Microsoft advocate ;-) I don't have a rabid distaste for Microsoft products. I will even go as far as to say having recently had a look at Windows XP it is a million percent improvement on 9X. Anyway that is besides the point. Viruses are spread because of careless software practises, ok by the users of software, but also by the vendors of the software that leave it wide open to such abuse. ( Anthony, well I never see his messages anymore, they get a Content Reject message by my MTA. ) -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:12: 4 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id EB62D37B41B for ; Sat, 29 Dec 2001 16:11:58 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 5338B786E4; Sun, 30 Dec 2001 10:41:57 +1030 (CST) Date: Sun, 30 Dec 2001 10:41:57 +1030 From: Greg Lehey To: Jim Freeze Cc: questions@freebsd.org, "H. Wade Minter" Subject: Re: Need Help with Olympus/Nikon Digital Camera - umass0 device Message-ID: <20011230104157.B33871@monorchid.lemis.com> References: <20011225151622.A19770@freebsdportal.com> <20011225221102.P38031-100000@bunning.skiltech.com> <20011229102026.A44597@freebsdportal.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229102026.A44597@freebsdportal.com> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday, 29 December 2001 at 10:20:26 -0500, Jim Freeze wrote: > Has anyone made any progress on getting the Olympus or Nikon > cameras working as a usb mass storage device? > > I need to be able to download images from the camera. > I have read the suggestion from several people > to just purchase a smart-card drive. I may end up having to go > that route, but would rather not pay any money if I don't > have to. I tried gphoto2 recently with my Nikon CoolPix 880. It was able to establish some kind of communication, but I didn't get any photos downloaded. One of the reasons I didn't continue was the realization that I was draining the batteries; I didn't see any evidence of something that wasn't working, just that I hadn't understood the commands yet. > But..., if I do, what is a good brand of smart card drive? And, > what can I expect to pay? Flash card PCMCIA adaptors seem to be all the same, only a few wires, and they cost about $10. They probably pay for themselves in battery life pretty quickly :-) Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:18:14 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 72A2A37B417 for ; Sat, 29 Dec 2001 16:18:10 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id C79FE786E3; Sun, 30 Dec 2001 10:48:08 +1030 (CST) Date: Sun, 30 Dec 2001 10:48:08 +1030 From: Greg Lehey To: Joe Parks Cc: freebsd-questions@freebsd.org Subject: Re: can I re-label partitions on the fly with sysinstall ? Message-ID: <20011230104808.C33871@monorchid.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday, 29 December 2001 at 10:00:31 -0700, Joe Parks wrote: > I have a machine with two disks, first disk has a 1gig root, then a 7gig > /mnt/data partition. > > Second disk has a 200meg /var and 128meg swap, then a 7.5gig /mnt/data2 > partition. > > --- > > I would like to start /stand/sysinstall over ssh (machine is in a different > state) and split each of the two /mnt/dataX partitions into multiple 1gig > /mnt/dataX partitions. > > So the / partition on the first disk will not change, and the /var and swap > partitions on the second disk will not change - I plan on not having any > downtime associated with this - I will just delete each of the two ~7 gig > data partitions and make 7 ~1gig data partitions in their place. > > --- > > So first off, is this reasonable ? Can I safely use /stand/sysinstall on a > running machine to relabel the disks ? Yes. > Second, will this new labeling scheme be in effect immediately after > exiting /stand/sysinstall, or will I need to reboot ? You'll have to use the w (write) command to make it take effect. You don't need to reboot; that won't change anything. > Will I need to manaully edit things like /etc/fstab ? Or will > sysinstal l do this for me. I'm not sure. I think it does edit /etc/fstab, but you'd better check. > Third, how should I _commit_ the change ? Should I press 'w' in the > label screen (for write) and then just quit out of sysinstall ? Or > is it more elaborate than that ? No, that's the way to do it. > Finally, I started /stand/sysinstall, went to 'custom' and went to > 'label' and was surprised to see in the "mount point" column for > each partition the word "none" - why does the custom label function > in sysinstall not know the label names of my partitions ? It's a bug. It doesn't read /etc/fstab, because it doesn't expect to find anything there. But you shouldn't be going via the custom install, go via the index. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:20:24 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 63D8D37B41B for ; Sat, 29 Dec 2001 16:20:12 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id BEAA5786E4; Sun, 30 Dec 2001 10:50:10 +1030 (CST) Date: Sun, 30 Dec 2001 10:50:10 +1030 From: Greg Lehey To: Joshua Coombs Cc: freebsd-questions@freebsd.org Subject: Re: ignore me Message-ID: <20011230105010.D33871@monorchid.lemis.com> References: <00a001c19091$62905b90$fa01a8c0@ABERRATION> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <00a001c19091$62905b90$fa01a8c0@ABERRATION> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday, 29 December 2001 at 12:51:03 -0500, Joshua Coombs wrote: > Verifying subscription, ignore me. : ) Please don't do this. You're sending spam to thousands of people. The correct way to verify your subscription is to ask majordomo@FreeBSD.org. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:28:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from monorchid.lemis.com (monorchid.lemis.com [192.109.197.75]) by hub.freebsd.org (Postfix) with ESMTP id 1AE7337B405 for ; Sat, 29 Dec 2001 16:28:23 -0800 (PST) Received: by monorchid.lemis.com (Postfix, from userid 1004) id 608EA786E3; Sun, 30 Dec 2001 10:58:21 +1030 (CST) Date: Sun, 30 Dec 2001 10:58:21 +1030 From: Greg Lehey To: Joshua Holland Cc: freebsd-questions@freebsd.org Subject: Re: Weird netstat output Message-ID: <20011230105821.E33871@monorchid.lemis.com> References: <20011229143242.D90696@monorchid.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday, 29 December 2001 at 13:17:31 -0600, Joshua Holland wrote: >> On Friday, 28 December 2001 at 20:16:02 -0600, Joshua Holland wrote: >>> I have a FreeBSD server, named jserver. What the heck is all this >>> jserver.syslog stuff that recently appeared: >>> >>> netstat -a: >>> >>> Active Internet connections (including servers) >>> Proto Recv-Q Send-Q Local Address Foreign Address (state) >>> udp4 0 0 jserver.2705 jserver.syslog >>> udp4 0 0 jserver.2704 jserver.syslog >>> udp4 0 0 jserver.2703 jserver.syslog >>> udp4 0 0 jserver.2702 jserver.syslog >>> udp4 0 0 jserver.2701 jserver.syslog >>> udp4 0 0 jserver.2659 jserver.syslog >>> udp4 0 0 jserver.2658 jserver.syslog >>> (etc) >> >> Looks like your syslogd has hung itself up. Try restarting it. > > I killed syslogd and restarted it. I'm still getting a long list > like below. It's running down every port number, starting at 2930 > and now is at 1030. It seems the list is just getting longer. Is > there a way to clear it, and then see if it keeps reporting these > connections? Strange. Are you getting lots of processes as well? You might like to install the lsof port and check who is opening these connections. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:32:43 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ideal.net.au (ion.ideal.net.au [203.20.241.5]) by hub.freebsd.org (Postfix) with ESMTP id 8012237B417 for ; Sat, 29 Dec 2001 16:32:40 -0800 (PST) Received: from titus.magus.cc (titus.magus.cc [203.27.67.131]) by mail.ideal.net.au (8.9.3/8.9.3) with ESMTP id LAA70613 for ; Sun, 30 Dec 2001 11:32:31 +1100 (EST) (envelope-from crowley@thegatesofhell.org) Date: Sun, 30 Dec 2001 11:36:20 +1100 (EST) From: Chris Aitken X-X-Sender: Reply-To: To: Subject: Re: LCD Panel Control Message-ID: <20011230113156.H8356-100000@titus.magus.cc> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 01:26 AM 30/12/2001, Andrew Reid wrote: >> Under wintendo there is software like LCDcenter, but I want to be able to >> control the LCD Panel though my FreeBSD box, where I can write a funky >> little script that can display whatever I want it to. > >See http://lcdproc.omnipotent.net/, paying particular attention to the >"FreeBSD Port" section. > > - andrew Can anyone shed some light on how I am supposed to apply this patch to the install of lcdproc ? I tried to compile it first and just got errors which im assuming are because its linux only straight out of the box, but I dont know how to apply the lcdproc_bsd.diff.gz patch to the install ? This is the error I get on the make (./configure works okay tho) gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../.. -Wall -Wno-unused -O6 -c glkproto.c glkproto.c: In function `glkopen': glkproto.c:48: `CBAUD' undeclared (first use in this function) glkproto.c:48: (Each undeclared identifier is reported only once glkproto.c:48: for each function it appears in.) glkproto.c:54: `O_SYNC' undeclared (first use in this function) *** Error code 1 Stop in /usr/home/crowley/lcdproc-0.4.1/server/drivers. *** Error code 1 Stop in /usr/home/crowley/lcdproc-0.4.1/server. *** Error code 1 Stop in /usr/home/crowley/lcdproc-0.4.1. *** Error code 1 Stop in /usr/home/crowley/lcdproc-0.4.1. Thanks Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 16:46:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from molly.intercom.net (molly.intercom.net [216.240.106.84]) by hub.freebsd.org (Postfix) with ESMTP id 0F27837B41A for ; Sat, 29 Dec 2001 16:46:43 -0800 (PST) Received: from cross (hh1124254.direcpc.com [206.71.124.254]) by molly.intercom.net (8.12.1/8.12.1) with SMTP id fBU0l8pk023001 for ; Sat, 29 Dec 2001 19:47:10 -0500 (EST) Message-ID: <000801c190cb$22231590$0273150a@woodstock.lanalyse.com> From: "Ron Hensley" To: References: <20011229143242.D90696@monorchid.lemis.com> Subject: Enlightenment Menu Background/Foreground Date: Sat, 29 Dec 2001 19:44:17 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 When I use the Reflection XServer to connect to my FreeBSD box, I can't see any words on the menus that appear when you Right/Left Click on the Desktop. The background is a pinkish marble with redish grains, with a wood panel title bar. There are no fonts, like the color map isnt coming across correctly. Id like to change the background and foreground's to something thats viewable with my XServer, however I cant seem to find where to change those. I use the Enlightenment Window Manager, and have ne themes installed, so just have the 'default' theme running. Desktop Wallpaper is set to None and the color type is Solid. Under Gnome Control Panel/Desktop/Panel Ive chosen some Gray Tiles as the type to use, but I never see those come into use anywhere. How can I mess with those Menu Panels? -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBPC5jYFFb04N5DzUjEQK/9QCeKaoEbbxTbySes3qTWsrpzawOJugAoJLp LdL7M8djTs/Vypnk6NuQTHhH =9aSw -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 17:16:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from academy.nsnet.cz (framiex.casablanca.cz [217.11.225.211]) by hub.freebsd.org (Postfix) with SMTP id B6B8437B417 for ; Sat, 29 Dec 2001 17:16:52 -0800 (PST) Received: (qmail 46548 invoked by uid 89); 30 Dec 2001 02:12:07 +0100 Message-ID: <20011230011207.46547.qmail@academy.nsnet.cz> From: "Guli" To: "freebsd-questions@FreeBSD.ORG" Subject: ssh + scp + ssh-dummy-shell Date: Sun, 30 Dec 2001 01:12:07 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I'm tying to use SCP with chroot i'm runing FreeBSD 4.4-STABLE #5: Wed Dec 12 20:11:23 CET 2001 i'v instaled SSH from ports (ssh-2.3.0) with added parameter --enable-static into Makefile then did all steb by step by http://www.ssh.com/products/ssh/administrator24/Using_Chroot_Manager__ssh-ch rootmgr_.html so first problem is when i run ssh-chrootmgr -h, or any other parameter it returns platan# ssh-chrootmgr -h /usr/local/bin/ssh-chrootmgr: 103: Syntax error: Bad fd number what does it mean? second, when i try to login with WinSCP2 login fail and i scpclient log is --------------------------------------- . Server version: SSH-1.99-2.3.0 SSH Secure Shell (non-commercial) . We claim version: SSH-2.0-PuTTY . Using SSH protocol version 2 . Host key fingerprint is: . 1024 d9:e1:92:af:0d:db:cd:8d:3d:4f:e9:2f:b4:d8:72:61 . Initialised zlib (RFC1950) compression . Initialised zlib (RFC1950) decompression . Initialised triple-DES client->server encryption . Initialised triple-DES server->client encryption . Opened channel for session . Started a shell/command . -------------------------------------------------------------------------- . Doing startup conversation with host (shell). . Skipping host startup message (if any). > echo "WinSCP: this is end-of-file:0" . All channels closed. Disconnecting . Getting current directory name. * (ESshFatal) Error getting name of current remote directory. --------------------------------------------------------------------------- the HOME/bin has '755 root.wheel" and HOME (/usr/home/mikulas) has '770 mikulas.www' there is the HOME/bin lrwxr-xr-x 1 root www 19 Dec 30 01:02 sftp-server -> sftp-server2.static -r-xr-xr-x 1 root wheel 258568 Dec 30 00:33 sftp-server2.static lrwxr-xr-x 1 root www 22 Dec 30 01:01 ssh-dummy-shell -> ssh-dummy-shell.static -r-xr-xr-x 1 root wheel 51264 Dec 30 00:32 ssh-dummy-shell.static where is the problem ? sorry for long message .... thanks a lot for any help. Jiri. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 17:37:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtpgw01.gargantuan.com (145bus8.tampabay.rr.com [24.94.145.8]) by hub.freebsd.org (Postfix) with ESMTP id 4F73237B417 for ; Sat, 29 Dec 2001 17:37:47 -0800 (PST) Received: from LKLDDC01.GARGANTUAN.COM (exchange.gargantuan.com [10.0.0.9]) by smtpgw01.gargantuan.com (Postfix) with ESMTP id E8C8414CB9; Sat, 29 Dec 2001 15:46:39 -0500 (EST) Received: by LKLDDC01.GARGANTUAN.COM with Internet Mail Service (5.5.2653.19) id ; Sat, 29 Dec 2001 15:46:29 -0500 Message-ID: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> From: "Oliver, Michael W." To: 'Cliff Sarginson' , freebsd-questions@freebsd.org Subject: RE: Teaching parents UNIX Date: Sat, 29 Dec 2001 15:46:29 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I would suggest that Microsoft software is NOT responsible for the spread of virii. What can software do by itself without the driving force of a human being? I submit that ignorant/cheap/lazy/whatever users, coupled with kids (with too much time on their hands and parents who don't know or don't care) writing virii, are the cause of the vast majority of virus infections. I do not want to get into any kind of pissing match with you Cliff, because your rabid distaste for MS products rivals any that I have seen, and I share that view to some extent. I will let Anthony be the Microsoft advocate ;-) Michael Oliver > -----Original Message----- > From: Cliff Sarginson [mailto:cliff@raggedclown.net] > Sent: Saturday, December 29, 2001 7:25 AM > To: freebsd-questions@freebsd.org > Subject: Re: Teaching parents UNIX > > > On Sat, Dec 29, 2001 at 02:02:29PM +0800, Kathy Quinlan wrote: > > ----- Original Message ----- > > From: "Jeffrey" > > > > > So while I really don't care if a person defragments their disk, > > > repairs broken software, uninstalls old software or even updates > > > their drivers. I do care that they are not maintaining their > > > machine to at least the point that they are not attacking > one of my > > > servers. > > > > Thi sis one of my pet gripes, I think that AV software > should be free, > > as it is fine and dandy for the people with the money to buy it and > > protect their system, but the people who can not afford it, > > unknowingly get infected and spread it to the rest of the world, so > > what some ppl say, I would rather have an AV software that > has one hit > > per day than the current 30 hits I am experiencing, and most of the > > viri are coming from ppl who either can not afford the fees > to get the > > defs or do not know how to...... Maybe we should insist ppl pass a > > basic computer course before going on the internet ? ;o) > > > There are a couple of points here. > One since Microsoft software is almost single-handedly > responsible for the spread of viruses across the globe, which > as pointed out above, does affect all public services even if > they use non-ms software, then Microsoft should be > responsible enough to give all users of their OS'es a > lifetime subscription gratis to an anti-viral service. > > That will not happen. > > Solution 2. People should accept the expense of buying an > anti-viral agent as being necessary to the safe-keeping of > the Internet. What happens is that many ISP's give out > anti-viral software as part of the deal on a 6 month license, > and then people never bother to re-new their subscription. > > Solution 3. ISP's should be held responsible for any of their > users who spread viruses through non-use of anti-viral > agents. They should either make it a condition of service, or > themselves run a gratis anti-viral service. > > This is called social-responsibility. Running MS software > without active anti-viral checking is the technoglogical > equivalent of having sex with strangers without using a condom. > > > -- > Regards > Cliff > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 17:46:17 2001 Delivered-To: freebsd-questions@freebsd.org Received: from IMGate1.cshore.com (imgate1.cshore.com [63.237.136.14]) by hub.freebsd.org (Postfix) with ESMTP id AFD8037B419 for ; Sat, 29 Dec 2001 17:46:14 -0800 (PST) Received: from sephiroth (unknown [63.112.157.56]) by IMGate1.cshore.com (Postfix) with SMTP id 450BF24100; Sat, 29 Dec 2001 20:47:25 -0500 (EST) Date: Sat, 29 Dec 2001 20:55:41 -0500 From: Matthew Graybosch To: "Oliver, Michael W." Cc: FreeBSD Questions Subject: Re: Teaching parents UNIX Message-Id: <20011229205541.1de0acec.matthew@starbreaker.net> In-Reply-To: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> Organization: starbreaker.net X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386--freebsd4.4) Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; boundary="=.PtK,r7,4HEX1Ts" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=.PtK,r7,4HEX1Ts Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Sat, 29 Dec 2001 15:46:29 -0500 "Oliver, Michael W." wrote: > I do not want to get into any kind of pissing match with you Cliff, > because your rabid distaste for MS products rivals any that I have seen, > and I share that view to some extent. I will let Anthony be the Microsoft > advocate ;-) Don't you mean Devil's Advocate? >^..^< -- Matthew Graybosch http://www.starbreaker.net GnuPG Key ID: 0x45BC4581 "Sex, Unix, and rock 'n roll" -----BEGIN GEEK CODE BLOCK----- Version: 3.12 G! d- s:+ a-- C+++ UB++++ P+ L+++ E W++ N+ o K- w--- O- M-- V-- PS+ PE++ Y+ PGP++ t 5 X R tv-- b++++ DI+++ D+ G++ e* h+ r++ y+ ------END GEEK CODE BLOCK------ --=.PtK,r7,4HEX1Ts Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) iD8DBQE8LnQhXG3c5kW8RYERAlYTAJwPn3rGjTs7FhISuftz5gImJy8hKwCghzCT bHgIHXN+Us9Xmv8YnmzMOwY= =jgfI -----END PGP SIGNATURE----- --=.PtK,r7,4HEX1Ts-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 18: 7:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 611AC37B416 for ; Sat, 29 Dec 2001 18:07:30 -0800 (PST) Received: from potentialtech.com (dhcp065-024-023-038.columbus.rr.com [65.24.23.38]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id fBU22pg10840 for ; Sat, 29 Dec 2001 21:02:51 -0500 (EST) Message-ID: <3C2E779B.6050205@potentialtech.com> Date: Sat, 29 Dec 2001 21:10:35 -0500 From: Bill Moran Organization: Potential Technology User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: [OT] bind problems Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've got a FreeBSD proxy that's supposed to be running bind as a caching nameserver, but something is awry and I can't figure out what the Sam-Hill I goofed up. FreeBSD 4.4-RELEASE bind 8.2.4-REL I've attempted to configure named to "forward only" so that it just does all its resolving through the upstream servers. I also have the clients configured to use the upstream servers as backups. Apparently this caching server is never answering any queries and the upstreams are getting all the questions (which, obviously, defeats the purpose) When I run nslookup on the proxy, I get an error: *** Can't find server name for address 127.0.0.1: No response from server And it falls back to the secondary to answer the queries. /var/log/messages records the following complaint from named every time I run nslookup: ns_req: no address for root server Anyone have any ideas what's wrong here? I'd be more than happy to provide the config files, but I didn't want to spam the list if it's something dumb that I goofed and someone can point it out without the config files. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19: 5:10 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bsd.ee.ntu.edu.tw (bsd.ee.ntu.edu.tw [140.112.18.34]) by hub.freebsd.org (Postfix) with ESMTP id 07F9137B41A for ; Sat, 29 Dec 2001 19:05:07 -0800 (PST) Received: by bsd.ee.ntu.edu.tw (Postfix, from userid 1000) id 8B073FB49; Sun, 30 Dec 2001 11:05:24 +0800 (CST) Date: Sun, 30 Dec 2001 11:05:24 +0800 From: sothat To: freebsd-questions@freebsd.org Subject: du and df not consistency ? Message-ID: <20011230030524.GA32059@bsd.ee.ntu.edu.tw> Mail-Followup-To: sothat , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=big5 Content-Disposition: inline User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi , I've met a weird problem the "/" is going out of space. Trying to find out what use the file system , I use du to figure it out what files use the space. below is df output: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 297663 255876 17974 93% / /dev/da1s1e 297663 173693 100157 63% /usr/local /dev/ad0s1f 992239 668380 244480 73% /usr/src /dev/ad0s1e 2980238 2209800 532019 81% /backup /dev/ad0s1g 4037030 2587663 1126405 70% /backup2 /dev/vinum/vinum0 7000492 6230498 209955 97% /mnt /dev/da2e 68798704 7827914 55466894 12% /ftp procfs 4 4 0 100% /proc the "/" Used 255876 kilo byte But when I use du -d 1 -x in / 77 ./dev 93796 ./usr 1812 ./stand 861 ./etc 1 ./proc 3965 ./bin 714 ./boot 1 ./mnt 5193 ./modules 4887 ./root 11776 ./sbin 17965 ./tmp 2468 ./var 4 ./modules.old 2 ./ftp 1 ./mnt2 1 ./backup 1 ./backup2 49 ./lost+found 153189 . I just got 153189 kilo. why the df output and du got the different result ? ( I've sync many times :) -- -sothat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19:10:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.mrf.mail.rcn.net (smtp02.mrf.mail.rcn.net [207.172.4.61]) by hub.freebsd.org (Postfix) with ESMTP id 6906F37B41E for ; Sat, 29 Dec 2001 19:10:15 -0800 (PST) Received: from 66-44-63-77.s331.tnt5.lnhva.md.dialup.rcn.com ([66.44.63.77] helo=sten.alder.net) by smtp02.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 16KWMT-0000NP-00 for freebsd-questions@freebsd.org; Sat, 29 Dec 2001 22:10:10 -0500 Received: by sten.alder.net (sSMTP sendmail emulation); Sat, 29 Dec 2001 22:09:05 -0500 Date: Sat, 29 Dec 2001 22:09:05 -0500 From: "Bob Hall" To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Message-ID: <20011229220904.A493@starpower.net> Mail-Followup-To: freebsd-questions@freebsd.org References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> <20011230000519.GB7709@raggedclown.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20011230000519.GB7709@raggedclown.net>; from cliff@raggedclown.net on Sun, Dec 30, 2001 at 01:05:19AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Dec 30, 2001 at 01:05:19AM +0100, Cliff Sarginson wrote: > On Sat, Dec 29, 2001 at 03:46:29PM -0500, Oliver, Michael W. wrote: > > I would suggest that Microsoft software is NOT responsible for the spread of > > virii. What can software do by itself without the driving force of a human > > being? I submit that ignorant/cheap/lazy/whatever users, coupled with kids > > (with too much time on their hands and parents who don't know or don't care) > > writing virii, are the cause of the vast majority of virus infections. > > That does not mean we should accept the spread of them by carelessness. > > > > > I do not want to get into any kind of pissing match with you Cliff, because > > your rabid distaste for MS products rivals any that I have seen, and I share > > that view to some extent. I will let Anthony be the Microsoft advocate ;-) > > I don't have a rabid distaste for Microsoft products. > I will even go as far as to say having recently had a look at > Windows XP it is a million percent improvement on 9X. Faint praise, indeed. > Anyway that is besides the point. > Viruses are spread because of careless software practises, ok by the > users of software, but also by the vendors of the software that > leave it wide open to such abuse. I've got to agree with Anthony on this one. Windows is attractive to virus writers because over 90% of people who use the internet use Windows. They can do a lot more damage for the same amount of effort with Windows than they can with any given version of Unix. Plus, the large number of Win systems makes it easier for the virii to spread. If we're going to engage in monoculture, we're going to have massive, destructive epidemics. As the level of knowledge necessary to operate a computer decreases, people who were previously unable or unwilling to use computers start using them, and the average level of competence of computer users decreases. Any specific system is only as secure as the person using it makes it. For most users, improvements in MS software aren't going to make their computers any safer because the users are still going to leave the machines wide open to infection. And now that DSL and cable are becoming popular, people leave their computers on and connected to the internet 24/7. Virii that scan for hosts to infect are going to start hitting client machines. MS contributes by selling their software at the beta stage, but that contribution is small compared to the other factors. Even if MS bundled anti-virus with their software, they can't force users to use it or update the virus signatures. Bob Hall -- Know thyself? Absurd direction! Bubbles bear no introspection. -Khushhal Khan Khatak To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19:28:56 2001 Delivered-To: freebsd-questions@freebsd.org Received: from creme-brulee.marcuscom.com (rdu57-28-046.nc.rr.com [66.57.28.46]) by hub.freebsd.org (Postfix) with ESMTP id 7EE1F37B405 for ; Sat, 29 Dec 2001 19:28:51 -0800 (PST) Received: from shumai.marcuscom.com (marcus@shumai.marcuscom.com [192.168.1.4]) by creme-brulee.marcuscom.com (8.11.6/8.11.6) with ESMTP id fBU3S7539056; Sat, 29 Dec 2001 22:28:13 -0500 (EST) (envelope-from marcus@marcuscom.com) Subject: Re: du and df not consistency ? From: Joe Clarke To: sothat Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <20011230030524.GA32059@bsd.ee.ntu.edu.tw> References: <20011230030524.GA32059@bsd.ee.ntu.edu.tw> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0 (Preview Release) Date: 29 Dec 2001 22:28:59 -0500 Message-Id: <1009682944.79990.0.camel@shumai.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 2001-12-29 at 22:05, sothat wrote: > > Hi , > > I've met a weird problem the "/" is going out of space. > > Trying to find out what use the file system , I use > > du to figure it out what files use the space. Well, my thoughts would be in either /tmp or /var will give you the most trouble. It's not a good idea to leave these on the root filesystem. / should be read-only for all intents and purposes. The more writing you do to /, the more chance you have to corrupt it. > > below is df output: > > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/da0s1a 297663 255876 17974 93% / > /dev/da1s1e 297663 173693 100157 63% /usr/local > /dev/ad0s1f 992239 668380 244480 73% /usr/src > /dev/ad0s1e 2980238 2209800 532019 81% /backup > /dev/ad0s1g 4037030 2587663 1126405 70% /backup2 > /dev/vinum/vinum0 7000492 6230498 209955 97% /mnt > /dev/da2e 68798704 7827914 55466894 12% /ftp > procfs 4 4 0 100% /proc > > the "/" Used 255876 kilo byte > > But when I use du -d 1 -x in / > > 77 ./dev > 93796 ./usr > 1812 ./stand > 861 ./etc > 1 ./proc > 3965 ./bin > 714 ./boot > 1 ./mnt > 5193 ./modules > 4887 ./root > 11776 ./sbin > 17965 ./tmp > 2468 ./var > 4 ./modules.old > 2 ./ftp > 1 ./mnt2 > 1 ./backup > 1 ./backup2 > 49 ./lost+found > 153189 . > > I just got 153189 kilo. > > why the df output and du got the different result ? > ( I've sync many times :) What does echo $BLOCKSIZE report? What version of FreeBSD is this? With 4.5-PRE, and BLOCKSIZE set to K, I get fairly consistent df/du reporting. Also, du may report different values if you run it as a non-root user. Try doing du -r -d 1 -x and see if you get any errors about unreadable directories. Joe > -- > -sothat > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19:49:55 2001 Delivered-To: freebsd-questions@freebsd.org Received: from salmon.maths.tcd.ie (salmon.maths.tcd.ie [134.226.81.11]) by hub.freebsd.org (Postfix) with SMTP id AFCE337B41E for ; Sat, 29 Dec 2001 19:49:52 -0800 (PST) Received: from walton.maths.tcd.ie by salmon.maths.tcd.ie with SMTP id ; 30 Dec 2001 03:49:51 +0000 (GMT) To: Jim Freeze Cc: questions@freebsd.org, "H. Wade Minter" Subject: Re: Need Help with Olympus/Nikon Digital Camera - umass0 device In-Reply-To: Your message of "Sat, 29 Dec 2001 10:20:26 EST." <20011229102026.A44597@freebsdportal.com> Date: Sun, 30 Dec 2001 03:49:50 +0000 From: Ian Dowse Message-ID: <200112300349.aa44973@salmon.maths.tcd.ie> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message <20011229102026.A44597@freebsdportal.com>, Jim Freeze writes: >Has anyone made any progress on getting the Olympus or Nikon >cameras working as a usb mass storage device? Try updating to a recent -STABLE. SCSI quirk entries have been added for a number of digital cameras including the Olympus C- series, so the "ILLEGAL REQUEST" error will no longer occur. Alternatively, edit /usr/src/sys/cam/scsi/dcsi_da.c, and manually add the quirk entry to the table there: { {T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "C-*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE }, Ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19:52:15 2001 Delivered-To: freebsd-questions@freebsd.org Received: from poseidon.student.umd.edu (poseidon.student.umd.edu [129.2.239.23]) by hub.freebsd.org (Postfix) with ESMTP id 09D1A37B417 for ; Sat, 29 Dec 2001 19:52:13 -0800 (PST) Received: from glue.umd.edu (localhost [127.0.0.1]) by poseidon.student.umd.edu (8.11.6/8.11.6) with ESMTP id fBU3qB786951; Sat, 29 Dec 2001 22:52:11 -0500 (EST) (envelope-from bfoz@glue.umd.edu) Message-ID: <3C2E8F6B.331D68D@glue.umd.edu> Date: Sat, 29 Dec 2001 22:52:11 -0500 From: Brandon Fosdick X-Mailer: Mozilla 4.79 [en] (X11; U; Linux 2.2.12 i386) X-Accept-Language: en MIME-Version: 1.0 To: Ron Hensley Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Enlightenment Menu Background/Foreground References: <20011229143242.D90696@monorchid.lemis.com> <000801c190cb$22231590$0273150a@woodstock.lanalyse.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ron Hensley wrote: > Desktop Wallpaper is set to None and the color type is Solid. Under Gnome > Control Panel/Desktop/Panel > Ive chosen some Gray Tiles as the type to use, but I never see those come > into use anywhere. > > How can I mess with those Menu Panels? Enlightenment doesn't use Gnome's settings. You can middle-click on the background and use the settings menu to configure E. You can also install the x11-wm/e16utils port to edit the menus and keybindings if you don't like doing it by hand. I'm not sure about the font problem, try using a theme with different fonts or changing the fonts in the default theme. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 19:59:37 2001 Delivered-To: freebsd-questions@freebsd.org Received: from su.ualberta.ca (mail.su.ualberta.ca [129.128.133.14]) by hub.freebsd.org (Postfix) with ESMTP id 54B5537B41C for ; Sat, 29 Dec 2001 19:59:33 -0800 (PST) Received: from [142.59.22.4] (HELO [192.168.1.22]) by su.ualberta.ca (CommuniGate Pro SMTP 3.5.1) with ESMTP id 600008; Sat, 29 Dec 2001 20:56:28 -0700 User-Agent: Microsoft-Entourage/10.0.0.1309 Date: Sat, 29 Dec 2001 20:59:21 -0700 Subject: Re: Questions about running an IRC server From: Colin Harford To: , Message-ID: Mime-version: 1.0 X-address: Suite 2-900, SUB, University of Alberta, 8900-114 St, Edmonton: Alberta, T6G 2J7 X-disclaimer: Opinions expressed herein are solely the responsibility Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG An IRC Server on its own is not a very big resource user, but the more and more users you add on, the more and more resources are needed. An IRC Server is fairly secured against system exploit, bearing in mind you are using a good well coded ircd like Unreal, Bahamut, Dreamforge, or one of th= e many others.=20 The biggest things I have found in my experience running irc servers is tha= t ram and CPU usage are the first casulities of a busy IRC Server. Twenty users, will easily run on a small 486 DX2 with a fair amount of memory. (providing the system is not running many other processes). As Christopher Schulte stated already, FreeBSD is an ideal platform for running an IRCD, most IRC Server networks are running FreeBSD, and most IRCD's are developed on FreeBSD. As for Bandwidth usage, a DSL connection is easily able to run 20 users, a dial-up account is able to handle about 4 connections, with few problems. Redundecy, would be best done, with a spare, unused machine, with a redundent DNS entry to switch to the secondary server. Like wise, if you add services, in the conf file, you can assign the secondary server to the conf file. Hope this helps. Colin Harford =A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Systems and Network Administrator =A0=A0=A0=A0 Apple Product Professional =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =A0=A0=A0=A0 Computer and Network Support =A0=A0=A0=A0=A0=A0=A0=A0 University of Alberta Students' Union =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Phone: (780) 492-4241 =A0=A0Fax: =A0(780) 492-4643 http://www.su.ualberta.ca "I sense much NT in you, NT leads to Blue Screen. Blue Screen leads to downtime, downtime leads to suffering. NT is the path to the darkside." - Unknown Unix Jedi Date: Sat, 29 Dec 2001 03:45:45 -0600 From: Rob Zietlow Subject: Questions about running an IRC server Hi, I was wondering if anyone has any expericne running an ircd. I'm looking=20 at what sort of System/Connection requirements we might need. We are looking at setting up a small network, 2-3 computers to support 15-20 users= . We'd like to have a couple servers for redundency, and to load balance. Now questions are: 1) what would be some good minimum system specs? 2) what is network overhead going to be? Any recommended connection for ou= r small user base.=20 3) should this be run in a jailed environment (I am guessing so) Any other hints, tips, ideas, or web resources would be greatly appreciated= . TIA Rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 20: 7:33 2001 Delivered-To: freebsd-questions@freebsd.org Received: from smtp017.mail.yahoo.com (smtp017.mail.yahoo.com [216.136.174.114]) by hub.freebsd.org (Postfix) with SMTP id 3575B37B405 for ; Sat, 29 Dec 2001 20:07:30 -0800 (PST) Received: from ci592716-c.valleyst1.ky.home.com (HELO Kaiser) (24.251.253.28) by smtp.mail.vip.sc5.yahoo.com with SMTP; 30 Dec 2001 04:07:29 -0000 Date: Sat, 29 Dec 2001 23:07:35 -0500 From: Donnie Jones To: Sam Drinkard Cc: freebsd-questions@freebsd.org Subject: Re: Multiple httpd servers on LAN only one real IP Address. Message-Id: <20011229230735.3725251e.donniejones18@yahoo.com> In-Reply-To: <3C2E0BC7.F7929282@vortex.wa4phy.net> References: <20011229130720.3acc8802.donniejones18@yahoo.com> <3C2E071B.D313DDFC@vortex.wa4phy.net> <20011229132048.7acaaf60.donniejones18@yahoo.com> <3C2E0BC7.F7929282@vortex.wa4phy.net> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 29 Dec 2001 13:30:31 -0500 Sam Drinkard wrote: > You can tell xinetd to redirect from port 80 on the primary ip address > to any other address/port combination. > > Would xinetd be able to differentiate between the two domains sending httpd requests? This is the only close example I can find of xinetd that seems related. But, I am unsure how I would need to configure xinetd to meet my needs. service ftpd { flags = REUSE socket_type = stream protocol = tcp wait = no user = root groups = yes bind = 10.1.1.1 redirect = 192.168.0.3 23 } -Donnie _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 20:19:13 2001 Delivered-To: freebsd-questions@freebsd.org Received: from fep1.cogeco.net (smtp.cogeco.net [216.221.81.25]) by hub.freebsd.org (Postfix) with ESMTP id 3F2AE37B420 for ; Sat, 29 Dec 2001 20:19:08 -0800 (PST) Received: from ergo.dhs.org (d150-228-183.home.cgocable.net [24.150.228.183]) by fep1.cogeco.net (Postfix) with SMTP id 5262748D5 for ; Sat, 29 Dec 2001 23:19:07 -0500 (EST) Date: Sat, 29 Dec 2001 23:19:06 -0500 From: Muhannad Asfour To: freebsd-questions@FreeBSD.ORG Subject: Port maintainer Message-Id: <20011229231906.30935ff3.muhannad07@cogeco.ca> X-Mailer: Sylpheed version 0.6.6 (GTK+ 1.2.10; i386-unknown-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just wondering how I can become a port mainter for a specific port so I can update it. If anyone has any tips or anything I'd appreciate it. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 20:34:59 2001 Delivered-To: freebsd-questions@freebsd.org Received: from java2.dpcsys.com (java2.dpcsys.com [206.16.184.5]) by hub.freebsd.org (Postfix) with ESMTP id 0A05B37B417 for ; Sat, 29 Dec 2001 20:34:58 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by java2.dpcsys.com (8.11.1/8.11.1) with ESMTP id fBU4YCD84152; Sat, 29 Dec 2001 20:34:12 -0800 (PST) Date: Sat, 29 Dec 2001 20:34:12 -0800 (PST) From: Dan Busarow To: Bill Moran Cc: freebsd-questions@FreeBSD.ORG Subject: Re: [OT] bind problems In-Reply-To: <3C2E779B.6050205@potentialtech.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Dec 29, Bill Moran wrote: > answering any queries and the upstreams are getting all the questions (which, > obviously, defeats the purpose) > When I run nslookup on the proxy, I get an error: > *** Can't find server name for address 127.0.0.1: No response from server > And it falls back to the secondary to answer the queries. > /var/log/messages records the following complaint from named every time I run > nslookup: > ns_req: no address for root server Add 127.0.0.1 back into /etc/hosts, it is there by default. Dan -- Dan Busarow 949 443 4172 Dana Point Communications, Inc. dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 20:53:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bsd.ee.ntu.edu.tw (bsd.ee.ntu.edu.tw [140.112.18.34]) by hub.freebsd.org (Postfix) with ESMTP id 8582F37B405 for ; Sat, 29 Dec 2001 20:53:40 -0800 (PST) Received: by bsd.ee.ntu.edu.tw (Postfix, from userid 1000) id 6D133FB35; Sun, 30 Dec 2001 12:53:42 +0800 (CST) Date: Sun, 30 Dec 2001 12:53:42 +0800 From: sothat To: freebsd-questions@FreeBSD.ORG Subject: Re: du and df not consistency ? Message-ID: <20011230045342.GA38980@bsd.ee.ntu.edu.tw> Mail-Followup-To: sothat , freebsd-questions@FreeBSD.ORG References: <20011230030524.GA32059@bsd.ee.ntu.edu.tw> <1009682944.79990.0.camel@shumai.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=big5 Content-Disposition: inline In-Reply-To: <1009682944.79990.0.camel@shumai.marcuscom.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 10:28:59PM -0500, Joe Clarke wrote: > On Sat, 2001-12-29 at 22:05, sothat wrote: > > Well, my thoughts would be in either /tmp or /var will give you the most > trouble. It's not a good idea to leave these on the root filesystem. / > should be read-only for all intents and purposes. The more writing you > do to /, the more chance you have to corrupt it. Oh thank god. The free space goes back :D As the problem you descirbe /var/log bursted and I use mount_null /mnt/log /var/log ( is it buggy ?) But for no reason , I umount /var/log and use soft link again :Q the space never turned back. > > > > > below is df output: > > > > Filesystem 1K-blocks Used Avail Capacity Mounted on > > /dev/da0s1a 297663 255876 17974 93% / > > /dev/da1s1e 297663 173693 100157 63% /usr/local > > /dev/ad0s1f 992239 668380 244480 73% /usr/src > > /dev/ad0s1e 2980238 2209800 532019 81% /backup > > /dev/ad0s1g 4037030 2587663 1126405 70% /backup2 > > /dev/vinum/vinum0 7000492 6230498 209955 97% /mnt > > /dev/da2e 68798704 7827914 55466894 12% /ftp > > procfs 4 4 0 100% /proc > > > > the "/" Used 255876 kilo byte > > > > But when I use du -d 1 -x in / > > > > 77 ./dev > > 93796 ./usr > > 1812 ./stand > > 861 ./etc > > 1 ./proc > > 3965 ./bin > > 714 ./boot > > 1 ./mnt > > 5193 ./modules > > 4887 ./root > > 11776 ./sbin > > 17965 ./tmp > > 2468 ./var > > 4 ./modules.old > > 2 ./ftp > > 1 ./mnt2 > > 1 ./backup > > 1 ./backup2 > > 49 ./lost+found > > 153189 . > > > > I just got 153189 kilo. > > > > why the df output and du got the different result ? > > ( I've sync many times :) > > What does echo $BLOCKSIZE report? What version of FreeBSD is this? > With 4.5-PRE, and BLOCKSIZE set to K, I get fairly consistent df/du > reporting. Also, du may report different values if you run it as a > non-root user. Try doing du -r -d 1 -x and see if you get any errors > about unreadable directories. FreeBSD Stable 4.4 du -r -d 1 -x get the same result . but they are the same now :) indi[root]:/# du -d 0 -x 153540 . inid[root]:/# df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 297663 153539 120311 56% / thanks anyway :) -- -sothat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 21: 7:54 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.XtremeDev.com (xtremedev.com [216.241.38.65]) by hub.freebsd.org (Postfix) with ESMTP id E2E8937B417 for ; Sat, 29 Dec 2001 21:07:51 -0800 (PST) Received: from xtremedev.com (xtremedev.com [216.241.38.65]) by mail.XtremeDev.com (Postfix) with ESMTP id 34E9E70607; Sat, 29 Dec 2001 22:07:45 -0700 (MST) Date: Sat, 29 Dec 2001 22:07:45 -0700 (MST) From: FreeBSD user To: Damien Tougas Cc: Dominic Marks , Rakesh Prajapati , Darren , Subject: Re: awesome find In-Reply-To: <687870000.1009670581@localhost> Message-ID: <20011229220726.G28537-100000@Amber.XtremeDev.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Anyone know how to enable this in zsh 4.0.4? On Sat, 29 Dec 2001, Damien Tougas wrote: > --On Saturday, December 29, 2001 19:34:10 +0000 Dominic Marks > wrote: > > > On Saturday 29 December 2001 7:27 pm, Rakesh Prajapati wrote: > >> On Sat, 29 Dec 2001, Dominic Marks wrote: > > > > > > > >> Also in bash , just type in a few chars (one or more) and press > >> TAB once and it will expand to files in that directory and pressing > >> TAB once more and it will list all the commands/programs that start > >> with those letters which are in $PATH. > >> > >> eg. ta gives me > >> tail talk tangle tar tasklist_applet > > > > Yup. For the record, tcsh can also do this, but instead you do: > > > >> ta > > tail talk tangle tar > > If you have "set autolist" in your .cshrc, then it will behave just the > same way as bash does when you press tab, only you don't have to press > tab twice to see the list. > > > --- > Damien Tougas > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 21:10:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from m20.unixathome.org (m20.unixathome.org [216.187.106.227]) by hub.freebsd.org (Postfix) with ESMTP id 0DE6137B417; Sat, 29 Dec 2001 21:10:15 -0800 (PST) Received: by m20.unixathome.org (Postfix, from userid 1001) id 738F47A72; Sun, 30 Dec 2001 00:10:02 -0500 (EST) From: Dan Langille To: freebsd-newbies@freebsd.org, freebsd-questions@freebsd.org Subject: The FreeBSD Diary: 2001-12-09 - 2001-12-29 Message-Id: <20011230051002.738F47A72@m20.unixathome.org> Date: Sun, 30 Dec 2001 00:10:02 -0500 (EST) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives and/or The FreeBSD Diary . These are the articles posted during this period: 28-Dec : pkgdb - packages database tool more about one of the portupgrade tools http://freebsddiary.org/pkgdb.php?2 26-Dec : an ATI XPERT 128 patch for XFree86-4 I could not find any documentation, so a patch solved it http://freebsddiary.org/xfree86-4.php?2 17-Dec : Make the keyboard work on a headless server (read also about t-shirts!) Sometimes it doesn\'t work. Here\'s what to do! http://freebsddiary.org/headless.php?2 11-Dec : Got ports? Here is THE way to upgrade them! Forget doing your port upgrades by hand! http://freebsddiary.org/portupgrade.php?2 -- Dan Langille - DVL Software Limited The FreeBSD Diary - http://freebsddiary.org/ - practical examples FreshPorts - http://freshports.org/ - the place for ports To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 21:44:25 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 1233937B405 for ; Sat, 29 Dec 2001 21:44:21 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBU5iFR76759; Sun, 30 Dec 2001 06:44:15 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <000e01c190f5$05236ec0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Cliff Sarginson" Cc: "FreeBSD Questions" References: <02eb01c1902e$69629bd0$fe00a8c0@wskatinka> <20011229122459.GE3776@raggedclown.net> <3C2E3837.3020907@earthlink.net> <20011229235438.GA7709@raggedclown.net> Subject: Re: Teaching parents UNIX Date: Sun, 30 Dec 2001 06:44:16 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Cliff writes: > I don't understand what you are trying to say by this. I believe he means that it's your fault when your system becomes infected with a virus, not the fault of Microsoft or anyone else. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 21:57:27 2001 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.atkielski.com (ASt-Lambert-101-2-1-14.abo.wanadoo.fr [193.251.59.14]) by hub.freebsd.org (Postfix) with ESMTP id 2FE5337B417 for ; Sat, 29 Dec 2001 21:57:24 -0800 (PST) Received: from contactdish ([10.0.0.10]) by freebie.atkielski.com (8.11.3/8.11.3) with SMTP id fBU5sOR76787; Sun, 30 Dec 2001 06:54:24 +0100 (CET) (envelope-from anthony@freebie.atkielski.com) Message-ID: <001301c190f6$701b81d0$0a00000a@atkielski.com> From: "Anthony Atkielski" To: "Cliff Sarginson" , References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> <20011230000519.GB7709@raggedclown.net> Subject: Re: Teaching parents UNIX Date: Sun, 30 Dec 2001 06:54:25 +0100 Organization: Anthony's Home Page (development site) MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Cliff writes: > That does not mean we should accept the spread > of them by carelessness. If you are not careless, you will not be infected by a virus. > I don't have a rabid distaste for Microsoft > products. Your hyperbolic, unwarranted, and prolonged rants against Microsoft say otherwise. In fact, they are so incongruous in context that they lead one to question your ability to be even moderately objective in any domain that Microsoft may have ever touched at any time, and even in domains that Microsoft has never even approached (since you appear to see their wicked hand even where it has never reached). > Anyway that is besides the point. As are your rants against Microsoft. > Viruses are spread because of careless software > practises, ok by the users of software, but also > by the vendors of the software that leave it > wide open to such abuse. No. Viruses are spread by careless users almost exclusively. If you take even a few precautions, you won't be infected by viruses. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 22:17:20 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 266A037B416 for ; Sat, 29 Dec 2001 22:17:01 -0800 (PST) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 28053B3 for ; Sat, 29 Dec 2001 21:16:26 -0900 (AKST) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: freebsd-questions@freebsd.org Subject: Re: Teaching parents UNIX Date: Sat, 29 Dec 2001 21:16:25 -0900 X-Mailer: KMail [version 1.3] References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> In-Reply-To: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20011230061626.28053B3@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Really guys, enough is enough! This has to be a new record for troll feeding on this list. Please take this thread to freebsd-chat where it belongs. Beech ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 22:43:18 2001 Delivered-To: freebsd-questions@freebsd.org Received: from catalyst.sasknow.net (catalyst.sasknow.net [207.195.92.130]) by hub.freebsd.org (Postfix) with ESMTP id 257AA37B41B for ; Sat, 29 Dec 2001 22:43:16 -0800 (PST) Received: from localhost (ryan@localhost) by catalyst.sasknow.net (8.11.6/8.11.6) with ESMTP id fBU6gEE48105; Sun, 30 Dec 2001 00:42:18 -0600 (CST) (envelope-from ryan@sasknow.com) X-Authentication-Warning: catalyst.sasknow.net: ryan owned process doing -bs Date: Sun, 30 Dec 2001 00:42:14 -0600 (CST) From: Ryan Thompson X-X-Sender: To: Muhannad Asfour Cc: Subject: Re: Port maintainer In-Reply-To: <20011229231906.30935ff3.muhannad07@cogeco.ca> Message-ID: <20011230003840.R46948-100000@catalyst.sasknow.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Muhannad Asfour wrote to freebsd-questions@FreeBSD.ORG: > Just wondering how I can become a port mainter for a specific port > so I can update it. If anyone has any tips or anything I'd > appreciate it. If the port doesn't currently have a maintainer (i.e., the current maintainer is ports@FreeBSD.org), submit a PR with a patch to change the maintainer (and you'll probably make a committer happy if you also include the patch to upgrade the port ;-) You don't necessarily have to be the port maintainer to submit a patch. You can just submit the PR containing the patch, and have the current maintainer approve it... Probably best is to work something out with the current maintainer beforehand, if there is one... maybe he/she is working on an upgrade already, or has a good reason NOT to upgrade the port. Read the porter's handbook for more information. I think this is all pretty much documented somewhere. - Ryan > Thanks > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Ryan Thompson Network Administrator, Accounts SaskNow Technologies - http://www.sasknow.com #106-380 3120 8th St E - Saskatoon, SK - S7H 0W2 Tel: 306-664-3600 Fax: 306-664-1161 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 22:57:16 2001 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp2out.rdc-nyc.rr.com (nycsmtp2out.rdc-nyc.rr.com [24.29.99.227]) by hub.freebsd.org (Postfix) with ESMTP id E8C7437B42C for ; Sat, 29 Dec 2001 22:57:03 -0800 (PST) Received: from Chopin (66-108-152-41.nyc.rr.com [66.108.152.41]) by nycsmtp2out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with SMTP id fBU6ugYi001997 for ; Sun, 30 Dec 2001 01:56:42 -0500 (EST) Message-ID: <000701c190ff$2d984a60$6d460a0a@Chopin> Reply-To: "Neil Radisch" From: "Neil Radisch" To: Subject: USB printer Date: Sun, 30 Dec 2001 01:56:59 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 Disposition-Notification-To: "Neil Radisch" X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Looking for information on how to set up a USB printer. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 23:14:23 2001 Delivered-To: freebsd-questions@freebsd.org Received: from a96180.upc-a.chello.nl (a96180.upc-a.chello.nl [62.163.96.180]) by hub.freebsd.org (Postfix) with ESMTP id 59DDC37B41A for ; Sat, 29 Dec 2001 23:14:20 -0800 (PST) Received: by a96180.upc-a.chello.nl (Postfix, from userid 1004) id 03EF6219A; Sun, 30 Dec 2001 08:14:17 +0100 (CET) Date: Sun, 30 Dec 2001 08:14:17 +0100 From: Munish Chopra To: questions@freebsd.org Subject: jpsnap -CURRENT ISO's can't read from /dev/acd0c Message-ID: <20011230071417.GA77185@daemon.chronias.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've been confined to Rogers@Home internet access for a few days now, and today I was going to get my machine running -CURRENT. So after trying an FTP install which failed miserably as the box just scans for DHCP servers endlessly, I decided to go with some of the jpsnap snapshots I had downloaded previously (26 and 28 December). Now everything goes fine right until they want to read from the CD, at which point some messages pop up about not being able to read /dev/acd0c from /dist (or something like that, can't for the life of me remember at the moment) because the device does not exist. A wild guess tells me this might have something to do with devfs, but I don't know. If anyone knows how to get around ths (or for that matter, if anyone has wrestled down DHCP *installs* with Rogers@Home), I'd appreciate it. Please cc me on the reply. Thanks. -- -Munish To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 23:40:48 2001 Delivered-To: freebsd-questions@freebsd.org Received: from cdstech.net (ct953398-b.lafayt1.in.home.com [24.17.45.198]) by hub.freebsd.org (Postfix) with ESMTP id 5555837B631 for ; Sat, 29 Dec 2001 23:39:48 -0800 (PST) Received: from Collosys (Collosys [192.168.1.3]) by cdstech.net (8.11.6/8.11.1) with ESMTP id fBU7hVt08228 for ; Sun, 30 Dec 2001 02:43:32 -0500 (EST) (envelope-from casey@cdstech.net) From: "Casey Scott" To: Subject: NTP Date: Sun, 30 Dec 2001 02:38:45 -0500 Message-ID: <000001c19105$03ccc520$0301a8c0@Collosys> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am trying to set a server's clock using the command "ntpdate". It appears that the clock is not accurate, but the process doesn't adjust the time. Here is "ntpdate -v": ntpdate -d 128.10.252.7 30 Dec 02:40:13 ntpdate[8222]: ntpdate 4.0.99b Thu Oct 25 13:03:00 EST 2001 (1) transmit(128.10.252.7) receive(128.10.252.7) transmit(128.10.252.7) receive(128.10.252.7) transmit(128.10.252.7) receive(128.10.252.7) transmit(128.10.252.7) receive(128.10.252.7) transmit(128.10.252.7) server 128.10.252.7, port 123 stratum 1, precision -19, leap 00, trust 000 refid [GPS], delay 0.07053, dispersion 0.00150 transmitted 4, in filter 4 reference time: bfd9427c.00000000 Sun, Dec 30 2001 2:36:28.000 originate timestamp: bfd9427d.40342e04 Sun, Dec 30 2001 2:36:29.250 transmit timestamp: bfd9435e.42cfe9b7 Sun, Dec 30 2001 2:40:14.260 filter delay: 0.09224 0.07053 0.07095 0.07202 0.00000 0.00000 0.00000 0.00000 filter offset: -225.025 -225.035 -225.034 -225.034 0.000000 0.000000 0.000000 0.000000 delay 0.07053, dispersion 0.00150 offset -225.035133 30 Dec 02:40:14 ntpdate[8222]: step time server 128.10.252.7 offset -225.035133 sec =========== Syslog reports the following which may be involved: /kernel: Time adjustment clamped to -1 second ========== Neither ntpdate or ntpd seem to adjust the clock, though both indicate a substantial difference in times. Does anyone have any suggestions? Thanks, Casey Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 23:51:21 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id 7F52037B417 for ; Sat, 29 Dec 2001 23:51:16 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16KakV-00048Z-00 for freebsd-questions@freebsd.org; Sun, 30 Dec 2001 07:51:15 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id 693E91171; Sun, 30 Dec 2001 08:51:14 +0100 (CET) Date: Sun, 30 Dec 2001 08:51:14 +0100 From: Cliff Sarginson To: freebsd-questions@freebsd.org Subject: End of an Era [ Was Re: Teaching parents UNIX ] Message-ID: <20011230075114.GA2435@raggedclown.net> References: <1DA741CA6767A144BAA4F10012536C27A97C@LKLDDC01.GARGANTUAN.COM> <20011230000519.GB7709@raggedclown.net> <20011229220904.A493@starpower.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20011229220904.A493@starpower.net> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mmm. I am breaking my own request for a New Year's moratorium on Redmond. I will be ignoring further discussion on this topic. Anyone sees me feeding trolls again please feel free to remind me of what I said on December 30th 2001 :) Savage me publicly and privately, threaten me, stick dead goldfish in my coffee. Ask if my real name isn't Anthony.. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Dec 29 23:54:51 2001 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id B863F37B41C for ; Sat, 29 Dec 2001 23:54:48 -0800 (PST) Received: from [212.238.194.207] (helo=tanya.raggedclown.net) by post.mail.nl.demon.net with esmtp (Exim 3.33 #1) id 16Kanv-000P9s-00 for freebsd-questions@freebsd.org; Sun, 30 Dec 2001 07:54:47 +0000 Received: by tanya.raggedclown.net (Postfix on SuSE Linux 7.3 (i386), from userid 500) id B89381171; Sun, 30 Dec 2001 08:54:46 +0100 (CET) Date: Sun, 30 Dec 2001 08:54:46 +0100 From: Cliff Sarginson To: freebsd-questions@FreeBSD.ORG Subject: Re: du and df not consistency ? Message-ID: <20011230075446.GB2435@raggedclown.net> References: <20011230030524.GA32059@bsd.ee.ntu.edu.tw> <1009682944.79990.0.camel@shumai.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1009682944.79990.0.camel@shumai.marcuscom.com> User-Agent: Mutt/1.3.24i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Dec 29, 2001 at 10:28:59PM -0500, Joe Clarke wrote: > On Sat, 2001-12-29 at 22:05, sothat wrote: > > > > Hi , > > > > I've met a weird problem the "/" is going out of space. > > As the man said probably /var. Also "du" and "df" have a different view of the world. -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
----- Original Message -----
From:=20 Stefan de Zeeuw =
To: Freebsd-Questions@Freebsd.=20 Org (E-mail)
Sent: Thursday, December 27, = 2001 10:37=20 AM
Subject: Weird IP = problem!


My setup:
FreeBSD4.4-RELEASE connected=20 to a cablemodem via rl0
rl1 is connected to = a HUB and=20 2 clients
And the machine acts as a = firewall/NAT=20 config

Yesterday my internet connection was dead, the = cablemodem was=20 acting strange(the lights) and I did a power recycle on the modem, = nothing=20 happend, same results.

After that I found this in my log:

Dec 25 17:07:37 FIREWALL /kernel: arp: unknown = hardware=20 address format (0x0800)
Dec 26 03:01:44 = FIREWALL=20 natd[284]: failed to write packet back (No route to host) =
Dec 26 03:02:54 FIREWALL natd[284]: failed to write packet = back (No=20 route to host)
Dec 26 03:04:14 FIREWALL last = message=20 repeated 2 times
Dec 26 03:14:56 FIREWALL = last message=20 repeated 14 times
Dec 26 03:19:10 FIREWALL = last=20 message repeated 13 times
Dec 26 05:15:02 = FIREWALL=20 natd[284]: failed to write packet back (No route to host) =
<snip>
Dec 26 09:23:25 = FIREWALL /kernel:=20 arplookup 192.168.100.1 failed: host is not on local network =
Dec 26 09:47:33 FIREWALL /kernel: arplookup 192.168.100.1 = failed: host=20 is not on local network
Dec 26 09:50:16 = FIREWALL=20 dhclient: New IP Address(rl0): 192.168.100.11
Dec 26=20 09:50:16 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20
Dec 26 09:50:16 FIREWALL dhclient: New Broadcast=20 Address(rl0): 192.168.100.255
Dec 26 = 10:23:49 FIREWALL=20 natd[284]: failed to write packet back (No route to host) =
Dec 26 10:23:51 FIREWALL natd[284]: failed to write packet = back (No=20 route to host)
Dec 26 10:23:51 FIREWALL = dhclient: New=20 IP Address(rl0): 192.168.100.11
Dec 26 = 10:23:51=20 FIREWALL dhclient: New Subnet Mask (rl0): 255.255.255.0 =
Dec 26 10:23:51 FIREWALL dhclient: New Broadcast = Address(rl0):=20 192.168.100.255
Dec 26 10:24:43 FIREWALL = natd[284]:=20 failed to write packet back (No route to host)
Dec 26=20 10:24:51 FIREWALL natd[284]: failed to write packet back (No route to=20 host)
Dec 26 10:24:52 FIREWALL dhclient: New = IP=20 Address(rl0): 192.168.100.11
Dec 26 10:24:52 = FIREWALL=20 dhclient: New Subnet Mask (rl0): 255.255.255.0
Dec 26=20 10:24:52 FIREWALL dhclient: New Broadcast Address(rl0): = 192.168.100.255=20
Dec 26 10:26:40 FIREWALL natd[284]: failed to write = packet=20 back (No route to host)
Dec 26 10:26:43 = FIREWALL=20 natd[284]: failed to write packet back (No route to host) =
Dec 26 10:26:43 FIREWALL dhclient: New IP Address(rl0):=20 192.168.100.11
Dec 26 10:26:43 FIREWALL = dhclient: New=20 Subnet Mask (rl0): 255.255.255.0
Dec 26 = 10:26:43=20 FIREWALL dhclient: New Broadcast Address(rl0): 192.168.100.255=20
Dec 26 10:39:01 FIREWALL /kernel: arp: = 00:20:40:e3:1d:7b is=20 using my IP address 0.0.0.0!
Dec 26 10:39:01 = FIREWALL=20 last message repeated 51 times
Dec 26 = 11:37:59=20 FIREWALL /kernel: arp: 00:20:40:e3:1d:7b is using my IP address=20 0.0.0.0!
Dec 26 11:37:59 FIREWALL last = message=20 repeated 256 times
Dec 26 11:52:13 FIREWALL = natd[284]:=20 failed to write packet back (No route to host)
Dec 26=20 12:20:47 FIREWALL login: ROOT LOGIN (root) ON ttyv0
Dec 26 12:24:02 FIREWALL natd[284]: failed to write packet = back (No=20 route to host)
Dec 26 12:24:02 FIREWALL last = message=20 repeated 64 times
Dec 26 12:26:18 FIREWALL = last=20 message repeated 5 times
Dec 26 12:26:18 = FIREWALL=20 dhclient: New IP Address(rl0): 213.73.160.xxx
Dec 26=20 12:26:18 FIREWALL dhclient: New Subnet Mask (rl0): = 255.255.255.0=20
Dec 26 12:26:18 FIREWALL dhclient: New Broadcast=20 Address(rl0): 213.73.160.255
Dec 26 12:26:18 = FIREWALL=20 dhclient: New Routers: 213.73.160.1

It is very strange and i do not understand what may = have=20 happend here. Was it a error by my ISP or was it a intrusion=20 attempt?

After this i killed my dhclient and started it up = again,=20 assigning me my original ip address. And everything was fine. =
But I would like to know what happend here. Anyone have some=20 ideas??
I would like to hear them! =

Sincerly
Stef=20