Date: Tue, 3 Apr 2001 02:50:35 +0200 From: "Wolfram Kraushaar" <wk@xtweb.de> To: <freebsd-scsi@freebsd.org> Subject: Need help with an error message Message-ID: <LNBBJNIAAJDGIECKKHHEAEOFCKAA.wk@xtweb.de>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0000_01C0BBE8.DB6ACBF0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
can you help me with the message at the bottom?
Right now I'm running the GENERIC 4.2 STABLE kernel.
Does it mean the disk is too slow or faulty?
When I ran this disk on Linux (before switching to
FreeBSD) there were no messages like this.
The disk (da7) is placed in a concatenated vinum-plex.
When I launch vinum it tells me the drive is up (without
problems)
Attached is compete dmesg printout.
ahc1: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem
0xea001000-0xea001fff irq 10 at device 10.0 on pci0
aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs
...
da7 at ahc1 bus 0 target 5 lun 0
da7: <Quantum XP32150 81HB> Fixed Direct Access SCSI-2 device
da7: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da7: 2050MB (4199760 512 byte sectors: 255H 63S/T 261C)
...
This message appears in the kernel log after some hours running without
problems:
<<
(da7:ahc1:0:5:0): SCB 0x3 - timed out while idle, SEQADDR == 0x4
STACK == 0x1, 0x189, 0x159, 0x0
SXFRCTL0 == 0x80
SCB count = 20
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries: 1:3
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 2 4 5 6 7 8 9 10 11 12 13 14 15
Pending list: 3
Kernel Free SCB list: 7 14 6 8 5 9 15 16 17 18 19 0 1 2 13 12 11 10
sg[0] - Addr 0x6008800 : Length 1024
(da7:ahc1:0:5:0): Queuing a BDR SCB
(da7:ahc1:0:5:0): Bus Device Reset Message Sent
(da7:ahc1:0:5:0): no longer in timeout, status = 34b
ahc1: Bus Device Reset on A:5. 1 SCBs aborted
>>
The following Message appears after running for 3 days:
> (da7:ahc1:0:5:0): SCB 0x66 - timed out while idle, SEQADDR == 0x4
> STACK == 0x1, 0x189, 0x159, 0x181
> SXFRCTL0 == 0x80
> SCB count = 230
> QINFIFO entries:
> Waiting Queue entries:
> Disconnected Queue entries: 7:102
> QOUTFIFO entries:
> Sequencer Free SCB List: 4 11 14 10 12 5 8 3 13 15 0 6 1 9 2
> Pending list: 102
> Kernel Free SCB list: 204 74 84 147 68 43 193 49 15 153 217 82 114 59 143
145 31 177 195 165 72 19 97 155 174 182 1 69 70 216 215 181 134 183 80 50
142 208 56 48 3 136 38 98 139 229 211 196 57 63 179 52 93 128 127 11 91 156
168 218 124 191 46 112 150 58 23 160 149 209 125 138 214 10 54 206 199 202 5
100 154 163 85 213 119 158 44 39 42 210 205 164 133 51 137 99 190 64 7 86
115 37 17 66 175 67 135 116 162 192 34 201 120 45 71 169 167 33 121 178 41
94 219 8 62 9 110 203 185 92 151 141 140 157 166 198 129 122 197 30 212 36
144 29 55 180 111 20 25 28 35 194 146 26 176 75 87 4 184 130 96 47 113 123
126 2 159 65 95 73 118 83 152 161 117 200 53 81 88 207 186 187 188 189 170
171 172 173 27 18 89 148 40 6 22 103 131 132 32 0 24 104 13 16 14 90 105 106
107 108 109 21 12 61 76 77 78 79 60 228 227 226 225 224 223 222 221 220
> sg[0] - Addr 0xa87c00 : Length 1024
> (da7:ahc1:0:5:0): Queuing a BDR SCB
> (da7:ahc1:0:5:0): Bus Device Reset Message Sent
> (da7:ahc1:0:5:0): no longer in timeout, status = 34b
> ahc1: Bus Device Reset on A:5. 1 SCBs aborted
Thx in advance for any help,
Wolfram Kraushaar
------=_NextPart_000_0000_01C0BBE8.DB6ACBF0
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.32-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 268435456 (262144K bytes)
config> di pcic0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory =3D 257085440 (251060K bytes)
Preloaded elf kernel "kernel" at 0xc0436000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f at =
device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at =
device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem =
0xea000000-0xea000fff irq 11 at device 9.0 on pci0
aic7880: Single Channel A, SCSI Id=3D7, 16/255 SCBs
ahc1: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem =
0xea001000-0xea001fff irq 10 at device 10.0 on pci0
aic7870: Wide Channel A, SCSI Id=3D7, 16/255 SCBs
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xec00-0xec3f irq 5 at =
device 11.0 on pci0
xl0: Ethernet address: 00:60:97:b4:47:e5
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 6204MB <ST36531A> [13446/15/63] at ata0-master UDMA33
ad1: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata0-slave UDMA33
ad2: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata1-master UDMA33
ad3: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata1-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 6 lun 0
sa0: <HP HP35470A T503> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/ad0s1a
da4 at ahc1 bus 0 target 2 lun 0
da4: <COMPAQPC DPES-31080 S31K> Fixed Direct Access SCSI-2 device
da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da4: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <NEC CD-ROM DRIVE:502 2.0y> Removable CD-ROM SCSI-2 device
cd0: 8.064MB/s transfers (8.064MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing =
Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da5 at ahc1 bus 0 target 3 lun 0
da5: <COMPAQPC DPES-31080 S31K> Fixed Direct Access SCSI-2 device
da5: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da5: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C)
da2 at ahc1 bus 0 target 0 lun 0
da2: <COMPAQPC DORS-31080 WA8B> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da2: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C)
da6 at ahc1 bus 0 target 4 lun 0
da6: <DEC RZ26L (C) DEC 440C> Fixed Direct Access SCSI-2 device
da6: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da6: 1001MB (2050860 512 byte sectors: 64H 32S/T 1001C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing =
Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da7 at ahc1 bus 0 target 5 lun 0
da7: <Quantum XP32150 81HB> Fixed Direct Access SCSI-2 device
da7: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da7: 2050MB (4199760 512 byte sectors: 255H 63S/T 261C)
da3 at ahc1 bus 0 target 1 lun 0
da3: <COMPAQPC DORS-31080 WA8B> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing =
Enabled
da3: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C)
vinum: loaded
vinum: reading configuration from /dev/da7s1e
vinum: updating configuration from /dev/da6s1e
vinum: updating configuration from /dev/da5s1e
vinum: updating configuration from /dev/da4s1e
vinum: updating configuration from /dev/da3s1e
vinum: updating configuration from /dev/da2s1e
vinum: updating configuration from /dev/da1s1e
vinum: updating configuration from /dev/da0s1e
vinum: updating configuration from /dev/ad3s2e
vinum: updating configuration from /dev/ad3s1e
vinum: updating configuration from /dev/ad2s2e
vinum: updating configuration from /dev/ad2s1e
vinum: updating configuration from /dev/ad1s2e
vinum: updating configuration from /dev/ad1s1e
(da7:ahc1:0:5:0): SCB 0x3 - timed out while idle, SEQADDR =3D=3D 0x4
STACK =3D=3D 0x1, 0x189, 0x159, 0x0
SXFRCTL0 =3D=3D 0x80
SCB count =3D 20
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries: 1:3
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 2 4 5 6 7 8 9 10 11 12 13 14 15
Pending list: 3
Kernel Free SCB list: 7 14 6 8 5 9 15 16 17 18 19 0 1 2 13 12 11 10
sg[0] - Addr 0x6008800 : Length 1024
(da7:ahc1:0:5:0): Queuing a BDR SCB
(da7:ahc1:0:5:0): Bus Device Reset Message Sent
(da7:ahc1:0:5:0): no longer in timeout, status =3D 34b
ahc1: Bus Device Reset on A:5. 1 SCBs aborted
------=_NextPart_000_0000_01C0BBE8.DB6ACBF0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LNBBJNIAAJDGIECKKHHEAEOFCKAA.wk>