Date: Sun, 14 Oct 2001 12:37:10 -0700 From: Randy Bush <randy@psg.com> To: freebsd-hardware@freebsd.org, freebsd-scsi@freebsd.org Subject: can't mount maxtor 3000 le Message-ID: <E15sr4Q-000N2w-00@rip.psg.com>
next in thread | raw e-mail | index | archive | help
i have a usb disk, a maxtor 3000LE
-stable
kernel
device scbus0 at sym0 # SCSI bus (required)
#device da # Direct Access (disks)
device da0 at scbus0 target 0 unit 0
device da1 at scbus0 target 1 unit 0
...
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
dmesg excerpts
ohci0: <OHCI (generic) USB controller> mem 0xfa000000-0xfa000fff irq 9 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
umass0: Maxtor Maxtor USB Drive , rev 2.00/3.01, addr 2
...
da2 at umass-sim0 bus 0 target 0 lun 0
da2: <MAXTOR 4 K040H2 A08.> Fixed Direct Access SCSI-0 device
da2: 650KB/s transfers
da2: 38182MB (78198750 512 byte sectors: 64H 32S/T 38182C)
camcontrol likes it
# camcontrol devlist
<IBM DDYS-T18350N S93E> at scbus0 target 0 lun 0 (pass0,da0)
<IBM DDYS-T18350N S93E> at scbus0 target 1 lun 0 (pass1,da1)
<MAXTOR 4 K040H2 A08.> at scbus1 target 0 lun 0 (pass2,da2)
# camcontrol tur da2
Unit is not ready
but i can not fdisk it
# fdisk da2
fdisk: can't open device /dev/da2
fdisk: cannot open disk /dev/da2: Input/output error
and it logs
(da2:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0
(da2:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0
(da2:umass-sim0:0:0:0): Invalid command operation code
da2: reading primary partition table: error reading fsbn 0
clues?
randy
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E15sr4Q-000N2w-00>