Date: Tue, 19 Mar 2002 03:42:41 -0800 From: Peter Wemm <peter@wemm.org> To: cvs-committers@FreeBSD.org, cvs-all@FreeBSD.org Cc: freebsd-ia64@FreeBSD.org Subject: Re: cvs commit: src/sys/ia64/conf GENERIC Message-ID: <20020319114241.34915390B@overcee.wemm.org> In-Reply-To: <200203191121.g2JBLDN50234@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Peter Wemm wrote:
> peter 2002/03/19 03:21:12 PST
>
> Modified files:
> sys/ia64/conf GENERIC
> Log:
> Enabling the SKI option is a guaranteed breakage for me. Interrupts no
> longer work.
> I can only get a box to boot with 'options SMP'.
Loading.: FreeBSD/ia64
Starting: FreeBSD/ia64
Console: EFI console
FreeBSD/ia64 EFI boot, Revision 0.1
(peter@overcee.netplex.com.au, Mon Nov 19 00:14:52 PST 2001)
Type '?' for a list of commands, 'help' for more detailed help.
ok load /kernel.smp4
/kernel.smp4 data=0x500e08+0x32dc8 syms=[0x8+0x42738+0x8+0x36ae2]
Entering /kernel.smp4 at 0xe00000000050a000...
WARNING: 32768 bytes not available for msgbuf in last cluster (8192 used)
ACPI debug layer 0x0 debug level 0x0
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #3: Tue Mar 19 02:35:47 PST 2002
peter@overcee.wemm.org:/home/peter/fbp4/ia64/sys/ia64/compile/SMP
Preloaded elf kernel "/kernel.smp4" at 0xe000000000ab0000.
CPU: Itanium (733.30-Mhz)
Origin = "GenuineIntel" Model = 0 Revision = 6
Features = 0x0
real memory = 1056546816 (1031784K bytes)
avail memory = 1018961920 (995080K bytes)
FPSWA Revision = 0x10009, Entry = 0xe00000003f16e050
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: SAPIC Id=0, SAPIC Eid=0 (BSP)
cpu1: SAPIC Id=3, SAPIC Eid=0
acpi0: <Intel W460GXBS> on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pci0: <base peripheral, interrupt controller> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 3.1 (no driver attached)
pci0: <serial bus, USB> at device 3.2 (no driver attached)
pci0: <serial bus, SMBus> at device 3.3 (no driver attached)
pci0: <multimedia, audio> at device 4.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1000-0x103f mem 0xfdf00000-0xfdffffff,0xfddef000-0xfddeffff irq 44 at device 5.0 on pci0
fxp0: Ethernet address 00:d0:b7:f9:f5:46
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <bridge, HOST-PCI> at device 16.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
acpi_pcib1: <Host-PCI bridge> on acpi0
pci1: <PCI bus> on acpi_pcib1
pci1: <base peripheral> at device 15.0 (no driver attached)
acpi_pcib2: <Host-PCI bridge> on acpi0
pci2: <PCI bus> on acpi_pcib2
isp0: <Qlogic ISP 1280 PCI SCSI Adapter> port 0x2000-0x20ff mem 0xf7fdf000-0xf7fdffff irq 27 at device 0.0 on pci2
pci2: <base peripheral> at device 15.0 (no driver attached)
acpi_pcib3: <Host-PCI bridge> on acpi0
pci3: <PCI bus> on acpi_pcib3
pci3: <display, VGA> at device 0.0 (no driver attached)
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xa08-0xa0b on acpi0
orm0: <Option ROMs> at iomem 0xca800-0xcd7ff,0xc8000-0xca7ff,0xc0000-0xc7fff on isa0
Waiting 2 seconds for SCSI devices to settle
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
da0 at isp0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS IV 9 WLS 0B0B> Fixed Direct Access SCSI-3 device
isp0: Command for fast post handle 0x44 not found
isp0: Command for fast post handle 0x45 not found
Mounting root from ufs:da1s2a
da0: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
da1 at isp0 bus 0 target 1 lun 0
da1: <IBM DDYS-T18350N S80D> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at isp0 bus 0 target 2 lun 0
da2: <SEAGATE ST39102LW 0005> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Enter full pathname of shell or RETURN for /bin/sh:
# mount -a
# df -k
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da1s2a 254063 93095 140643 40% /
devfs 1 1 0 100% /dev
/dev/da1s2e 1016303 229128 705871 25% /usr
/dev/da1s2f 254063 405 233333 0% /var
/dev/da1s2g 254063 67446 166292 29% /tmp
/dev/da1s2h 11330522 941218 9482863 9% /home
/dev/da0s1 200380 165500 34880 83% /efi
procfs 8 8 0 100% /proc
# uname -a
FreeBSD 5.0-CURRENT FreeBSD 5.0-CURRENT #3: Tue Mar 19 02:35:47 PST 2002 peter@overcee.wemm.org:/home/peter/fbp4/ia64/sys/ia64/compile/SMP ia64
# sysctl hw.ncpu
hw.ncpu: 2
# ls
.cshrc bin efi home sys
.profile boot etc mnt tmp
COPYRIGHT boot.dfr hello proc usr
a.out boot.local hello.c root var
archive dev hello.o sbin
And for a bit of fun, a self compiled executable (dynamic linked even):
# PATH=/archive/ia64-30/bin:$PATH
# gcc -o hello hello.c
# file hello
hello: ELF 64-bit LSB executable, IA-64 (Intel 64 bit architecture) version 1 (FreeBSD), dynamically linked (uses shared libs), not stripped
# ./hello
hello world
# ls -l hello
-rwxr-xr-x 1 root 433 6621 Mar 18 19:37 hello
# ldd ./hello
./hello:
libc.so.5 => /usr/lib/libc.so.5 (0x600000004004a000)
This is running in SMP mode. Marcel and Doug have been very busy. :-)
Cheers,
-Peter
--
Peter Wemm - peter@wemm.org; peter@FreeBSD.org; peter@yahoo-inc.com
"All of this is for nothing if we don't go to the stars" - JMS/B5
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ia64" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020319114241.34915390B>