From owner-freebsd-questions Sun Apr 28 0:31:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from darwin.lastamericanempire.com (dsl081-101-239.den1.dsl.speakeasy.net [64.81.101.239]) by hub.freebsd.org (Postfix) with ESMTP id 26F0337B416 for ; Sun, 28 Apr 2002 00:31:47 -0700 (PDT) Received: by darwin.lastamericanempire.com (Postfix, from userid 1001) id BDA9F1D29F; Sun, 28 Apr 2002 01:31:44 -0600 (MDT) Date: Sun, 28 Apr 2002 01:31:44 -0600 From: Zach Thompson To: questions@freebsd.org Subject: Re: Galeon 1.2.1 problems Message-ID: <20020428013144.A452@darwin.lastamericanempire.com> Mail-Followup-To: Zach Thompson , questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Mailer: Mutt http://www.mutt.org/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there a problem with Galeon and jdk13? If I go to a site that loads an applet (e.g. home.planetarion.com), when I close Galeon the java_vm process quickly starts to monopolize the cpu. Before: 19616 cublai 2 0 34496K 30112K poll 0:04 2.77% 2.69% galeon-bin 19623 cublai 18 0 99720K 20236K pause 0:02 3.58% 2.39% java_vm After: 19623 cublai 59 0 99908K 21672K RUN 1:26 96.79% 96.34% java_vm I've uninstalled, reinstalled (WITH_FULL_MOZILLA), and removed the conf dirs in ~ with no luck. Still the same result. Zach Thompson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 0:34: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 3DA6237B416 for ; Sun, 28 Apr 2002 00:34:05 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 171jC8-0001el-00 for questions@freebsd.org; Sun, 28 Apr 2002 00:34:04 -0700 Message-ID: <003b01c1eea0$61519880$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: FTP Links Date: Sun, 28 Apr 2002 03:35:12 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi people, How do I make a link in an FTP site? I've seen it done, but can't do it myself Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 2: 3:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id 0728237B400 for ; Sun, 28 Apr 2002 02:03:25 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g3S93IH29636 for freebsd-questions@FreeBSD.ORG; Sun, 28 Apr 2002 01:03:18 -0800 Message-Id: <200204280903.g3S93IH29636@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: freebsd-questions@FreeBSD.ORG Subject: Re: 1 minute delay while connecting to any host Date: Sun, 28 Apr 2002 01:03:18 -0800 X-Mailer: KMail [version 1.3.2] References: <743669500.20020427213601@fastmail.fm> <20020427150238.A95999@xor.obsecurity.org> In-Reply-To: <20020427150238.A95999@xor.obsecurity.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 27 April 2002 02:02 pm, Kris Kennaway wrote: > On Sat, Apr 27, 2002 at 09:36:01PM +0400, Anton Shcherbinin wrote: > > > > I installed FreeBSD 4.5 Release. When my host is trying to connect to > > any other host specified by name, I experience a huge (1.5 minutes) > > delay before the hosts are connected. For example, suppose I want to get > > http://yahoo.com/ page. I write: > > Your DNS setup is broken. Well DUH! He knew that, thats why he posted. Clearly its only partly broken because it does work after timing out a few times. Don't feel obligated to jump in if you have nothing usefull to add. _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 3:30:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta07-svc.ntlworld.com (mta07-svc.ntlworld.com [62.253.162.47]) by hub.freebsd.org (Postfix) with ESMTP id 39FF237B400 for ; Sun, 28 Apr 2002 03:30:37 -0700 (PDT) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta07-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020428103035.PLYH29981.mta07-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 28 Apr 2002 11:30:35 +0100 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.6) with ESMTP id g3SAUZV95051; Sun, 28 Apr 2002 11:30:35 +0100 (BST) (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g3SAUYV20289; Sun, 28 Apr 2002 11:30:34 +0100 (BST) (envelope-from scott) Date: Sun, 28 Apr 2002 11:30:34 +0100 From: Scott Mitchell To: atk2@arctic.org Cc: freebsd-questions@FreeBSD.ORG Subject: Re: checking hard disk -- hdparm like tool? Message-ID: <20020428113034.A20049@fishballoon.dyndns.org> References: <20020427181133.C296@fishballoon.dyndns.org> <20020427213650.2213.qmail@twinlark.arctic.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020427213650.2213.qmail@twinlark.arctic.org>; from atk2@arctic.org on Sat, Apr 27, 2002 at 09:36:50PM -0000 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Apr 27, 2002 at 09:36:50PM -0000, atk2@arctic.org wrote: > Ok -- I checked again what it has is > > ad0: 57259MB ... ata0-master WDMA2 (not sure what the 'W' is) > > If I unplug the dvd as several suggested I get > > ad0: 57259MB [116336/16/63] at ata0-master WDMA2 > > > (aka same thing) > Any suggestions on how to get it up to UDMA 5 (what is the 'W' before the DMA2? From the ATA manpage, WDMA2 == DMA2 == 16MB/s. What motherboard and ATA controller do you have? The 'atapci0' line from the boot messages would be useful here. It might be worth checking the BIOS settings for the drive. I had a problem last week with an older UDMA33-capable motherboard that was putting everything in PIO mode when using the 'auto detect' setting. Windows and Debian both believed what the BIOS was telling them, which did not make for a good CD-burning experience :-( Again, if you want anything more than UDMA33 to work, you'll need the right cable. Are you sure you have an 80-wire cable in there? Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 3:42:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from twinlark.arctic.org (twinlark.arctic.org [208.44.199.239]) by hub.freebsd.org (Postfix) with ESMTP id 9753437B416 for ; Sun, 28 Apr 2002 03:42:11 -0700 (PDT) Received: (qmail 18054 invoked by uid 1347); 28 Apr 2002 10:42:01 -0000 Date: 28 Apr 2002 10:42:01 -0000 Message-ID: <20020428104201.18053.qmail@twinlark.arctic.org> From: atk2@arctic.org To: atk2@arctic.org, scott.mitchell@mail.com Subject: Re: checking hard disk -- hdparm like tool? Cc: freebsd-hardware@freebsd.org, freebsd-questions@FreeBSD.ORG In-Reply-To: <20020428113034.A20049@fishballoon.dyndns.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The motherboard is an A7V333 (new board) that has a VT8233a for south bridge which supports ata133 (aka UDMA 6). The bios indicates the drive is UDMA 6 enabled. My original email suggested that maybe FreeBSD doesn't detect/understand the VT8233a and is reverting to UDMA 2 - could this be the case? the atapci0 line reads: Apr 27 18:48:34 pc1 /kernel: atapci0: port 0xb400-0xb40f irq 0 at device 17.1 on pci 0 I am 100% sure there is an 80pin cable in. I tried a 40pin cable and the bios immediately detected the difference. I also tried another OS. Oh well any/all suggestions would be useful... Alan ||From scott.mitchell@mail.com Sun Apr 28 03:30:37 2002 ||On Sat, Apr 27, 2002 at 09:36:50PM -0000, atk2@arctic.org wrote: ||> Ok -- I checked again what it has is ||> ||> ad0: 57259MB ... ata0-master WDMA2 (not sure what the 'W' is) ||> ||> If I unplug the dvd as several suggested I get ||> ||> ad0: 57259MB [116336/16/63] at ata0-master WDMA2 ||> ||> ||> (aka same thing) ||> Any suggestions on how to get it up to UDMA 5 (what is the 'W' before the DMA2? ||>From the ATA manpage, WDMA2 == DMA2 == 16MB/s. ||What motherboard and ATA controller do you have? The 'atapci0' line from ||the boot messages would be useful here. ||It might be worth checking the BIOS settings for the drive. I had a ||problem last week with an older UDMA33-capable motherboard that was putting ||everything in PIO mode when using the 'auto detect' setting. Windows and ||Debian both believed what the BIOS was telling them, which did not make for ||a good CD-burning experience :-( ||Again, if you want anything more than UDMA33 to work, you'll need the right ||cable. Are you sure you have an 80-wire cable in there? || Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 3:57:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta06-svc.ntlworld.com (mta06-svc.ntlworld.com [62.253.162.46]) by hub.freebsd.org (Postfix) with ESMTP id 91E1A37B41B; Sun, 28 Apr 2002 03:57:02 -0700 (PDT) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta06-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020428105701.HATT20036.mta06-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 28 Apr 2002 11:57:01 +0100 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.6) with ESMTP id g3SAv1V95126; Sun, 28 Apr 2002 11:57:01 +0100 (BST) (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g3SAv1220722; Sun, 28 Apr 2002 11:57:01 +0100 (BST) (envelope-from scott) Date: Sun, 28 Apr 2002 11:57:01 +0100 From: Scott Mitchell To: atk2@arctic.org Cc: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: checking hard disk -- hdparm like tool? Message-ID: <20020428115701.B20049@fishballoon.dyndns.org> References: <20020428113034.A20049@fishballoon.dyndns.org> <20020428104201.18053.qmail@twinlark.arctic.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: <20020428104201.18053.qmail@twinlark.arctic.org>; from atk2@arctic.org on Sun, Apr 28, 2002 at 10:42:01AM -0000 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 10:42:01AM -0000, atk2@arctic.org wrote: > The motherboard is an A7V333 (new board) that has a VT8233a for south bridge > which supports ata133 (aka UDMA 6). The bios indicates the drive is UDMA 6 > enabled. > > My original email suggested that maybe FreeBSD doesn't detect/understand the > VT8233a and is reverting to UDMA 2 - could this be the case? You're probably right -- it looks like you have everything set up correctly, but the driver is playing it safe with an unknown controller. It might be worth upgrading to the latest -STABLE and verifying that the problem still exists. Then send a message to freebsd-stable, perhaps cc'd to Søren Schmidt, the author of the ata driver (his address is in the manpage). There might be a very simple patch to tell the driver that yes, this controller really does support these modes. Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 4:12:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from post.webmailer.de (natpost.webmailer.de [192.67.198.65]) by hub.freebsd.org (Postfix) with ESMTP id 0838137B41C for ; Sun, 28 Apr 2002 04:12:05 -0700 (PDT) Received: from hume (b-180-24-220.ma.dial.de.ignite.net [62.180.24.220]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id NAA18341; Sun, 28 Apr 2002 13:11:51 +0200 (MET DST) Received: from lutz by hume with local (Exim 3.35 #1 (Debian)) id 171m63-0000kV-00; Sun, 28 Apr 2002 12:39:59 +0200 Date: Sun, 28 Apr 2002 12:39:59 +0200 From: Lutz Horn To: Scott Mitchell Cc: freebsd-questions@freebsd.org Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020428103959.GA2782@lutz-horn.de> References: <20020427134911.GA2993@lutz-horn.de> <20020427172805.GA5550@lutz-horn.de> <20020427185238.D296@fishballoon.dyndns.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="W/nzBZO5zC0uMSeA" Content-Disposition: inline In-Reply-To: <20020427185238.D296@fishballoon.dyndns.org> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --W/nzBZO5zC0uMSeA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Scott, * Scott Mitchell [20020427 18:52 +0100]: > What, if anything, is in /etc/pccard.conf on your system? Have you > changed anything in /etc/defaults/pccard.conf? Right down towards the > end of that file you should see the following: >=20 > card "Xircom" "CreditCard 10/100" > config auto "xe" ? > insert /etc/pccard_ether $device start > remove /etc/pccard_ether $device stop That's true. I've tried to overwrite this in /etc/pccard.conf by replacing the "?" with 3, the irq assigned to the card under a previous installation of Debian GNU/Linux. But it seems as this only makes thinks more obscure. So I've reverted to the defaults in /etc/defaults/pccard.conf. > It *looks* as though pccardd is trying to configure the card using > configuration entry #0, which doesn't exist on a CE3. This shouldn't > happen with the default pccard.conf file -- the 'auto' on the config > line tells it to configure using whatever config entries are actually > present on the card. Back to the default this behaviour vanishes. But unfortunately pccardd still says "driver allocation failed for Xircom(CreditCard 10/100). Device not configured". > What do you get from 'pccardc dumpcis'? # pccards dumpcis Code 136 not found Code 136 not found code Unknown ignored Configuration data for card in slot 1 Tuple #1, code =3D 0x1 (Common memory descriptor), length =3D 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS =3D OFF Speed =3D No speed, Memory block size =3D reserved, 32 units Tuple #2, code =3D 0x17 (Attribute memory descriptor), length =3D 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS =3D OFF Speed =3D No speed, Memory block size =3D reserved, 32 units Tuple #3, code =3D 0x15 (Version 1 info), length =3D 44 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31 020: 30 2f 31 30 30 00 31 2e 30 30 00 ff Version =3D 5.0, Manuf =3D [Xircom], card vers =3D [CreditCard 10/1= 00] Addit. info =3D [CE3-10/100],[1.00] Tuple #4, code =3D 0x0 (Null tuple), length =3D 8 000: 52 25 dd 00 00 00 00 00 Tuple #5, code =3D 0x20 (Manufacturer ID), length =3D 5 000: 05 01 0a 01 43 PCMCIA ID =3D 0x105, OEM ID =3D 0x10a Tuple #6, code =3D 0x44 (Card init date), length =3D 4 000: e2 6b 89 23 Tuple #7, code =3D 0x1a (Configuration map), length =3D 5 000: 01 01 00 08 03 Reg len =3D 2, config register addr =3D 0x800, last config =3D 0x1 Registers: XX------=20 Tuple #8, code =3D 0x1b (Configuration entry), length =3D 25 000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60 010: 00 00 0f 70 bc 8e 10 00 20 Config index =3D 0x1(default) Interface byte =3D 0xc1 (I/O) +RDY/-BSY active, wait signal suppor= ted Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 3.5 x 100mA Max current average over 1 second: 4 x 100mA Max current average over 10 ms: 4 x 100mA Power down supply current: 1 x 100mA Wait scale Speed =3D 1.2 x 10 ms RDY/BSY scale Speed =3D 1.2 x 10 ms Card decodes 4 address lines, full 8/16 Bit I/O I/O address # 1: block start =3D 0x0 block length =3D 0x10 IRQ modes: Level, Pulse IRQs: 2 3 4 5 7 9 10 11 15 Memory space length =3D 0x10 Max twin cards =3D 0 Misc attr: (Power down supported) Tuple #9, code =3D 0x21 (Functional ID), length =3D 2 000: 06 00 Network/LAN adapter Tuple #10, code =3D 0x22 (Functional EXT), length =3D 8 000: 04 06 00 80 c7 52 25 dd Network node ID: 00 80 c7 52 25 dd Tuple #11, code =3D 0x22 (Functional EXT), length =3D 2 000: 01 02 Network technology: Ethernet Tuple #12, code =3D 0x22 (Functional EXT), length =3D 5 000: 02 80 96 98 00 Network speed: 10 Mb/sec Tuple #13, code =3D 0x22 (Functional EXT), length =3D 5 000: 02 00 e1 f5 05 Network speed: 100 Mb/sec Tuple #14, code =3D 0x22 (Functional EXT), length =3D 2 000: 03 01 Network media: UTP Tuple #15, code =3D 0x22 (Functional EXT), length =3D 2 000: 03 03 Network media: Thin coax Tuple #16, code =3D 0x22 (Functional EXT), length =3D 2 000: 05 00 Network connector: open connector standard Tuple #17, code =3D 0xff (Terminator), length =3D 0 2 slots found Regards Lutz --=20 Lutz Horn | GnuPG: 1024D/6EBDA359 1999-09-20 438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359 --W/nzBZO5zC0uMSeA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE8y9F/zQ+com69o1kRAuXjAKDDD1cFy6E/3GKbPx6g4eIwT7hU/QCg0qKe O6UZT5ecq4KabApfPfrvem4= =E1yc -----END PGP SIGNATURE----- --W/nzBZO5zC0uMSeA-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 4:29:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.kpnqwest.ch (mail.eunet.ch [146.228.10.7]) by hub.freebsd.org (Postfix) with ESMTP id 43CF737B416 for ; Sun, 28 Apr 2002 04:29:21 -0700 (PDT) Received: from eurisco.e-link.ch (mail.e-link.ch [193.72.189.2]) by mail.kpnqwest.ch (8.9.3/1.34) via ESMTP id NAA07182 for ; Sun, 28 Apr 2002 13:29:20 +0200 (CEST) env-from (cleto@eurisco.com) Received: from thor.e-link.ch (thor.e-link.ch [193.72.189.8]) by eurisco.e-link.ch (8.11.3/8.11.3) with ESMTP id g3SBTJ640447 for ; Sun, 28 Apr 2002 13:29:19 +0200 (CEST) (envelope-from cleto@eurisco.com) Date: Sun, 28 Apr 2002 13:29:48 +0200 (CEST) From: Cleto Pescia X-X-Sender: cleto@thor.e-link.ch To: freebsd-questions@FreeBSD.ORG Subject: Icons alignment in KDE 3 In-Reply-To: <20020424104900.P5930-100000@pan.ehsbrann.com> Message-ID: <20020428132335.N31804-100000@thor.e-link.ch> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Listers, Yesterday I installed KDE 3.0 from the ports, and I still observe a problem I had with KDE 2.2.2: I can't deactivate "Align Icons Vertically on Desktop" in the Control Panel. I searched several mailing-lists, including kde-freebsd, but the suggestions I found didn't help. I also added export QTDIR=/usr/X11R6 export KDEDIR=/usr/local to my environment before starting KDE through startx, but without any notable changes. I'm using qt-3.0.3_3. Any idea? Cleto To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 4:40:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailout04.sul.t-online.com (mailout04.sul.t-online.com [194.25.134.18]) by hub.freebsd.org (Postfix) with ESMTP id 5A86C37B41A for ; Sun, 28 Apr 2002 04:40:07 -0700 (PDT) Received: from fwd09.sul.t-online.de by mailout04.sul.t-online.com with smtp id 171mxN-00053J-09; Sun, 28 Apr 2002 13:35:05 +0200 Received: from boss.home.folkerts-net.de (07031388170-0001@[217.230.29.122]) by fmrl09.sul.t-online.com with esmtp id 171mxA-0ieFLkC; Sun, 28 Apr 2002 13:34:52 +0200 Received: from localhost (localhost [127.0.0.1]) by boss.home.folkerts-net.de (8.11.6/8.9.3) with ESMTP id g3SBYp200700 for ; Sun, 28 Apr 2002 13:34:51 +0200 (CEST) (envelope-from ralf.folkerts@epost.de) Content-Transfer-Encoding: 7bit Content-Type: text/plain Date: 28 Apr 2002 14:34:32 +0300 From: Ralf Folkerts Message-Id: <1019993672.321.68.camel@beastie.home.folkerts-net.de> Mime-Version: 1.0 Received: from freebsd.home.folkerts-net.de (beastie.home.folkerts-net.de [10.0.0.6]) by pentium (AvMailGate-6.13.0.2) id 00696-23F720A1; Sun, 28 Apr 2002 13:34:31 +0200 Subject: MPD-(PPTP) Config Problem... To: freebsd-questions@freebsd.org X-AntiVirus: OK! AvMailGate Version 6.13.0.12 at boss.home.folkerts-net.de has not found any known virus in this email. X-Mailer: Ximian Evolution 1.0.3 X-Sender: 07031388170-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'd like to access "my" Company's Net through a VPN from my FreeBSD box. However, I was unable to configure mpd (and pptp) to work.I then tried from my Win-Box - and it worked (so there must a be a way to configure mpd to get it to work, too). In a "short" Overview: I have a small Network @ home (10.0.0.0/24) and access the IN through a DSL-Router (10.0.0.254/32 local, a.b.c.d/32 as assigned by ISP,. remote). The company's internal Network is on address 192.168.1.0/24. The company's VPN-Router can be reached via Internet at address "c.o.m.p" It will assign ne an address 192.168.7.101/32 which, however, is fix for my Login-Name. FreeBSD is 4.5STABLE, mpd is mpd-3.7. I tried with several Configs, but either MPD won't connect at all, or it will connect and I also can ping the remote machines but not e.g. telnet to them (which works fine from my Win-machine, so it shouldn't be a Routing Problem of the Server's of the Company) or it does establish a link but then produces errors. Here is my "latest" config that produces the last symptom (connects but the produces errors). ---<<>>--- default: load vpn vpn: new -i ng0 vpn vpn set iface disable on-demand set iface addrs 192.168.7.101 c.o.m.p set iface idle 0 set iface route 192.168.1.0/24 set bundle disable multilink set bundle authname "abc" set link yes acfcomp protocomp set link disable pap chap set link accept chap # If remote machine is NT you need this.. set link enable no-orig-auth set link keep-alive 10 75 set ipcp yes vjcomp set ipcp ranges 192.168.7.101/32 c.o.m.p/32 set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 set ccp yes mpp-e128 set bundle enable crypt-reqd set ccp yes mpp-stateless open ---<<>>--- ---<<>>--- vpn: set link type pptp set pptp self 192.168.7.101 set pptp peer c.o.m.p set pptp disable incoming set pptp enable originate outcall ---<<>> ---<<>>--- beastie:root#mpd Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 668, version 3.7 (root@freebsd.home.folkerts-net.de 17:43 18-Apr-2002) [vpn] ppp node is "mpd668-vpn" [vpn] using interface ng0 [vpn] IFACE: Open event [vpn] IPCP: Open event [vpn] IPCP: state change Initial --> Starting [vpn] IPCP: LayerStart [vpn:vpn] [vpn] bundle: OPEN event in state CLOSED [vpn] opening link "vpn"... [vpn] link: OPEN event [vpn] LCP: Open event [vpn] LCP: state change Initial --> Starting [vpn] LCP: LayerStart [vpn] device: OPEN event in state DOWN pptp0: connecting to c.o.m.p:1723 [vpn] device is now in state OPENING pptp0: connected to c.o.m.p:1723 pptp0: attached to connection with c.o.m.p:1723 pptp0-0: outgoing call connected at 64000 bps [vpn] PPTP call successful [vpn] device: UP event in state OPENING [vpn] device is now in state UP [vpn] link: UP event [vpn] link: origination is local [vpn] LCP: Up event [vpn] LCP: state change Starting --> Req-Sent [vpn] LCP: phase shift DEAD --> ESTABLISH [vpn] LCP: SendConfigReq #1 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 12345678 [vpn] rec'd unknown ctrl message, cookie=942710669 cmd=4 [vpn] LCP: rec'd Configure Request #1 link 0 (Req-Sent) MRU 1524 AUTHPROTO CHAP MD5 MAGICNUM 12345678 PROTOCOMP ACFCOMP [vpn] LCP: SendConfigAck #1 MRU 1524 AUTHPROTO CHAP MD5 MAGICNUM 12345678 PROTOCOMP ACFCOMP [vpn] LCP: state change Req-Sent --> Ack-Sent [vpn] LCP: rec'd Configure Ack #1 link 0 (Ack-Sent) ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 12345678 [vpn] LCP: state change Ack-Sent --> Opened [vpn] LCP: phase shift ESTABLISH --> AUTHENTICATE [vpn] LCP: auth: peer wants CHAP, I want nothing [vpn] LCP: LayerUp [vpn] CHAP: rec'd CHALLENGE #1 Name: "company" Using authname "abc" [vpn] CHAP: sending RESPONSE [vpn] CHAP: rec'd SUCCESS #1 [vpn] LCP: authorization successful [vpn] LCP: phase shift AUTHENTICATE --> NETWORK [vpn] up: 1 link, total bandwidth 64000 bps [vpn] IPCP: Up event [vpn] IPCP: state change Starting --> Req-Sent [vpn] IPCP: SendConfigReq #1 IPADDR 192.168.7.101 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [vpn] CCP: Open event [vpn] CCP: state change Initial --> Starting [vpn] CCP: LayerStart [vpn] CCP: Up event [vpn] CCP: state change Starting --> Req-Sent [vpn] CCP: SendConfigReq #1 MPPC 0x01000060: MPPE, 40 bit, 128 bit, stateless [vpn] CCP: rec'd Configure Request #1 link 0 (Req-Sent) MPPC 0x00000020: MPPE, 40 bit [vpn] CCP: SendConfigAck #1 MPPC 0x00000020: MPPE, 40 bit [vpn] CCP: state change Req-Sent --> Ack-Sent [vpn] IPCP: rec'd Configure Request #1 link 0 (Req-Sent) IPADDR c.o.m.p Same as PPTP IP; would cause routing loop NAKing with c.o.m.p [vpn] IPCP: SendConfigNak #1 IPADDR c.o.m.p [vpn] IPCP: rec'd Configure Reject #1 link 0 (Req-Sent) COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [vpn] IPCP: SendConfigReq #2 IPADDR 192.168.7.101 [vpn] CCP: SendConfigReq #2 MPPC 0x01000060: MPPE, 40 bit, 128 bit, stateless [vpn] IPCP: rec'd Configure Ack #2 link 0 (Req-Sent) IPADDR 192.168.7.101 [vpn] IPCP: state change Req-Sent --> Ack-Rcvd [vpn] CCP: rec'd Configure Nak #2 link 0 (Ack-Sent) MPPC 0x00000020: MPPE, 40 bit [vpn] CCP: SendConfigReq #3 MPPC 0x00000020: MPPE, 40 bit [vpn] CCP: rec'd Configure Ack #3 link 0 (Ack-Sent) MPPC 0x00000020: MPPE, 40 bit [vpn] CCP: state change Ack-Sent --> Opened [vpn] CCP: LayerUp [vpn] "accept chap" required for MPPE [vpn] can't determine credentials for MPPE [vpn] CCP: failed to negotiate required encryption [vpn] CCP: Close event [vpn] CCP: state change Opened --> Closing [vpn] CCP: SendTerminateReq #4 [vpn] CCP: LayerDown [vpn] CCP: state change Closing --> Closed [vpn] CCP: LayerFinish [vpn] "accept chap" required for MPPE [vpn] can't determine credentials for MPPE [vpn] CCP: failed to negotiate required encryption [vpn] CCP: Close event [vpn] CCP: LayerFinish Compress using: MPPE, 40 bit Decompress using: MPPE, 40 bit [vpn] CCP: rec'd Terminate Ack #4 link 0 (Closed) [vpn] CCP: rec'd Configure Request #2 link 0 (Closed) [vpn] CCP: SendTerminateAck #5 [vpn] IPCP: rec'd Configure Request #2 link 0 (Ack-Rcvd) IPADDR c.o.m.p Same as PPTP IP; would cause routing loop NAKing with c.o.m.p [vpn] IPCP: SendConfigNak #2 IPADDR c.o.m.p [vpn] IPCP: rec'd Configure Request #3 link 0 (Ack-Rcvd) [vpn] IPCP: SendConfigAck #3 [vpn] IPCP: state change Ack-Rcvd --> Opened [vpn] IPCP: LayerUp 192.168.7.101 -> c.o.m.p [vpn] IFACE: Up event [vpn] exec: /sbin/ifconfig ng0 192.168.7.101 c.o.m.p netmask 0xffffffff -link0 [vpn] exec: /sbin/route add 192.168.1.0 c.o.m.p -netmask 0xffffff00 [vpn] IFACE: Up event ---<<>>--- When I try to ping a Server I get (I put the DNS-Zone for "company.lan" on my local DNS!): ---<<<>>>--- beastie:mpd#ping test.company.lan PING test.company.lan (192.168.1.9): 56 data bytes ping: sendto: Resource deadlock avoided ping: sendto: Resource deadlock avoided ping: sendto: No buffer space available ping: sendto: No buffer space available ping: sendto: No buffer space available ping: sendto: No buffer space available ---<<>>--- Could someone out there please put me on the right track?? I first assumed my NATting router be a problem, but as my Win-Box establishes the pptp-Link w/o any problems (I can ping and telnet and ftp to all Servers I tried) I hope hat this should not be the problem?! Would be great if someone could help me with this! Regards, _ralf_ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 4:46:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp0.adl1.internode.on.net (smtp0.adl1.internode.on.net [203.16.214.194]) by hub.freebsd.org (Postfix) with ESMTP id 501A837B404 for ; Sun, 28 Apr 2002 04:46:13 -0700 (PDT) Received: from midget.dons.net.au (ppp424.sa.adsl.on.net [150.101.244.167]) by smtp0.adl1.internode.on.net (8.11.6/8.11.6) with ESMTP id g3SBk8T34417 for ; Sun, 28 Apr 2002 21:16:08 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Received: from localhost (root@localhost [127.0.0.1]) by midget.dons.net.au (8.12.2/8.12.2) with ESMTP id g3SBjr52003069 for ; Sun, 28 Apr 2002 21:15:55 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Subject: Clock adjustment? From: "Daniel O'Connor" To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 28 Apr 2002 21:15:41 +0930 Message-Id: <1019994343.437.63.camel@chowder.dons.net.au> Mime-Version: 1.0 X-Spam-Status: No, hits=0 required=5 X-Spam-Level: (0) X-Scanned-By: MIMEDefang 2.6 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What is the correct procedure for adjusting the PC clock? One of my PC's loses about 120s per week which is being corrected by ntpdate. I would like to tune the clock if possible instead. I've checked the handbook and FAQ but I couldn't find anything relevant :( I believe you used to be able to run adjkerntz with an option which would change the time added to the clock per tick but not longer. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 9A8C 569F 685A D928 5140 AE4B 319B 41F4 5D17 FDD5 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 4:50:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sumter.awod.com (sumter.awod.com [208.140.99.1]) by hub.freebsd.org (Postfix) with ESMTP id D664637B41E for ; Sun, 28 Apr 2002 04:50:27 -0700 (PDT) Received: from teddy.fas.com (pcp01010372pcs.mplsnt01.sc.comcast.net [68.58.176.67]) by sumter.awod.com (8.8.7/8.12.2) with ESMTP id HAA20440 for ; Sun, 28 Apr 2002 07:50:27 -0400 (EDT) (envelope-from stanb@awod.com) X-Authentication-Warning: sumter.awod.com: User stanb [pcp01010372pcs.mplsnt01.sc.comcast.net] popped 96 seconds ago Received: from stan by teddy.fas.com with local (Exim 3.35 #1 (Debian)) id 171nDW-0001PF-00 for ; Sun, 28 Apr 2002 07:51:46 -0400 Date: Sun, 28 Apr 2002 07:51:46 -0400 From: stan To: Free BSD Questions list Subject: portupgrade failures this weekend Message-ID: <20020428115146.GA5319@teddy.fas.com> Mail-Followup-To: Free BSD Questions list Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i X-Editor: gVim X-Operating-System: Debian GNU/Linux X-Kernel-Version: 2.4.17 X-Uptime: 07:48:00 up 36 days, 11:32, 1 user, load average: 0.27, 0.25, 0.23 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I routinely csvup, makeworld, and portupgrade my laptop each weekend. This weekend several of the ports failed to build. Here is a list: ! devel/autoconf (autoconf-2.52_2) (unknown build error) ! www/p5-libwww (p5-libwww-5.53) (unknown build error) ! devel/bison (bison-1.29) (unknown build error) ! converters/kdesupport11 (kdesupport-1.94) (Makefile broken) ! graphics/ImageMagick (ImageMagick-5.4.3.11_2) (install error) ! devel/sdl10 (sdl-1.0.8_1) (port directory error) ! astro/xglobe (xglobe-0.5) (Makefile broken) ! games/blackjack (blackjack-1.2) (Makefile broken) ! x11-toolkits/gtk-engines (gtk-engines-0.12_1) (configure error) ! x11/gnomelibs (gnomelibs-1.4.1.4_1) (install error) ! irc/xchat (xchat-1.8.4) (unknown build error) The machine s runing STABLE. Does anyone see a patern here? What can I do to fix this? -- "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." -- Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 5: 1:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id D05BF37B419 for ; Sun, 28 Apr 2002 05:01:45 -0700 (PDT) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id E07BC2B84A; Sun, 28 Apr 2002 14:01:33 +0200 (CEST) Received: by k7.mavetju.org (Postfix, from userid 1001) id B20F54A1; Sun, 28 Apr 2002 22:01:14 +1000 (EST) Date: Sun, 28 Apr 2002 22:01:14 +1000 From: Edwin Groothuis To: stan Cc: Free BSD Questions list Subject: Re: portupgrade failures this weekend Message-ID: <20020428220114.B56548@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , stan , Free BSD Questions list References: <20020428115146.GA5319@teddy.fas.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020428115146.GA5319@teddy.fas.com>; from stanb@awod.com on Sun, Apr 28, 2002 at 07:51:46AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 07:51:46AM -0400, stan wrote: > I routinely csvup, makeworld, and portupgrade my laptop each weekend. > > This weekend several of the ports failed to build. Here is a list: > > ! devel/autoconf (autoconf-2.52_2) (unknown build error) > ! www/p5-libwww (p5-libwww-5.53) (unknown build error) > ! devel/bison (bison-1.29) (unknown build error) > ! converters/kdesupport11 (kdesupport-1.94) (Makefile broken) > ! graphics/ImageMagick (ImageMagick-5.4.3.11_2) (install error) > ! devel/sdl10 (sdl-1.0.8_1) (port directory error) > ! astro/xglobe (xglobe-0.5) (Makefile broken) > ! games/blackjack (blackjack-1.2) (Makefile broken) > ! x11-toolkits/gtk-engines (gtk-engines-0.12_1) (configure error) > ! x11/gnomelibs (gnomelibs-1.4.1.4_1) (install error) > ! irc/xchat (xchat-1.8.4) (unknown build error) > > The machine s runing STABLE. > > Does anyone see a patern here? Well, portupgrade is just a tool to automate it, but if it fails means you have to check it manually. For example: astro/xglobe doesn't exist anymore devel/sdl10 doesn't exist anymore games/blackjack doesn't exist anymore converters/kdesupport11 doesn't exist anymore For the rest, I would say "run it manually" and see what goes wrong. Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 5:16:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail1.theplanet.com (mail1.theplanet.com [216.234.234.32]) by hub.freebsd.org (Postfix) with ESMTP id 95D5037B404 for ; Sun, 28 Apr 2002 05:16:50 -0700 (PDT) Received: from jheath.theplanet.com (jheath.theplanet.com [216.185.111.7] (may be forged)) by mail1.theplanet.com (8.9.3/8.9.3) with ESMTP id HAA16545 for ; Sun, 28 Apr 2002 07:16:44 -0500 (CDT) Message-Id: <5.1.0.14.2.20020428071125.025b0160@mail.theplanet.com> X-Sender: justinh@mail.theplanet.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 28 Apr 2002 07:15:57 -0500 To: freebsd-questions@freebsd.org From: Justin Heath Subject: OpenSSH and hosts.allow Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am trying to set up sshd (OpenSSH) to use hosts.allow . The problem is that the rules seem to work with IP address but not host names. Example Works: sshd: 0.0.0.0: allow Does not work: sshd: .domain.com: allow -or- sshd: my.domain.com: allow Any suggestions? Thanks. Justin Heath To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 7: 8:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts24-srv.bellnexxia.net (tomts24.bellnexxia.net [209.226.175.187]) by hub.freebsd.org (Postfix) with ESMTP id ECCB137B41B for ; Sun, 28 Apr 2002 07:08:07 -0700 (PDT) Received: from there ([64.231.165.250]) by tomts24-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020428140802.NUQH9704.tomts24-srv.bellnexxia.net@there>; Sun, 28 Apr 2002 10:08:02 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Steve Brown To: "Maicon Stihler" , "question freebsd" Subject: Re: the best window manager Date: Sun, 28 Apr 2002 10:08:00 -0400 X-Mailer: KMail [version 1.3.2] References: <001801c1ecac$b5bee080$61e487c8@LocalHost> In-Reply-To: <001801c1ecac$b5bee080$61e487c8@LocalHost> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020428140802.NUQH9704.tomts24-srv.bellnexxia.net@there> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I was wondering what wm should I install on my FBSD box. Try xfce, see http://www.xfce.org/ for info. It's in the ports. It claims to be a desktop environment, personally I'd call it a window manager (what's the difference?). But it's real small if you already have GTK, simple to configure either by GUI or editing a text file, looks like HP-VUE or CDE. Fast, clean, complete, and everything works. If I could only have one, this is it. Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 7:43:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fed1mtao04.cox.net (fed1mtao04.cox.net [68.6.19.241]) by hub.freebsd.org (Postfix) with ESMTP id 82FCE37B419 for ; Sun, 28 Apr 2002 07:43:01 -0700 (PDT) Received: from CX907019A ([68.0.150.184]) by fed1mtao04.cox.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020428144256.HAXE1366.fed1mtao04.cox.net@CX907019A> for ; Sun, 28 Apr 2002 10:42:56 -0400 From: "Blane R. Boynton" To: Subject: Cannot configure Netgear FA410TX in Compaq Prosignia 150 Laptop Date: Sun, 28 Apr 2002 07:41:05 -0700 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000C_01C1EE88.0DACB5B0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_000C_01C1EE88.0DACB5B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Greetings All, I have been having a problem whereby I cannot make my NETGEAR FA410TX PCMCIA NIC configure in my Compaq Prosignia 150 laptop. I have made the appropriate changes to rc.conf, such as adding “pccard_enable=”YES” and the card is recognized on boot, but no matter what I do I cannot get it to configure. The card is always placed on IRQ 3 when pccardd recognizes it, which I believe is causing an IRQ conflict with my CardBus to PCI bridge, which also happens to make use of IRQ 3. I have made changes to /etc/pccard.conf such that IRQ’s 3 and 5 are excluded from the distribution list, however pccardd still allocates the card to IRQ 3 regardless of the IRQ list settings I specify. I have read up on the list and seen this problem before, I have tried a couple solutions, I even went as far as to use “pccardc enabler” with a forced IRQ setting via the –i flag, the card still configs at IRQ3, even when I tell it manually to use another IRQ such as 10. I have also tried to get my Linksys PCMPC100V3 card to work, which is supported in pccard.conf, yet I get the same problem. The card is recognized, configured on IRQ 3 and then when I try to config it manually or via DHCP I get the same error as I got above “/kernel ed: device timeout”. If anyone can help I would appreciate that you would CC me in any and all replies. Thanks in Advance, Blane Boynton Bboynton@u.arizona.edu ------=_NextPart_000_000C_01C1EE88.0DACB5B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Greetings All,

 

I have been having a problem whereby I cannot make my NETGEAR = FA410TX PCMCIA NIC configure in my Compaq Prosignia 150 laptop. I have made the appropriate changes to rc.conf, such as adding = “pccard_enable=3D”YES” and the card is recognized on boot, but no matter what I do I cannot get it to configure. The card is always placed on IRQ 3 when pccardd recognizes = it, which I believe is causing an IRQ conflict with my CardBus to PCI bridge, = which also happens to make use of IRQ 3. I have made changes to /etc/pccard.conf = such that IRQ’s 3 and 5 are excluded from the distribution list, however = pccardd still allocates the card to IRQ 3 regardless of the IRQ list settings I = specify. I have read up on the list and seen this problem before, I have tried a = couple solutions, I even went as far as to use “pccardc enabler” = with a forced IRQ setting via the –i flag, the card still configs at IRQ3, even when = I tell it manually to use another IRQ such as = 10.

 

I have also tried to get my Linksys PCMPC100V3 card to work, = which is supported in pccard.conf, yet I get the same problem. The card is = recognized, configured on IRQ 3 and then when I try to config it manually or via = DHCP I get the same error as I got above “/kernel ed: device = timeout”.

 

If anyone can help I would appreciate that you would CC me in any = and all replies.

 

Thanks in Advance,

 

Blane Boynton

Bboynton@u.arizona.edu

------=_NextPart_000_000C_01C1EE88.0DACB5B0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 7:59:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kirk.dlee.org (pool-138-88-3-17.res.east.verizon.net [138.88.3.17]) by hub.freebsd.org (Postfix) with ESMTP id 5DC2A37B404 for ; Sun, 28 Apr 2002 07:59:22 -0700 (PDT) Received: (from dgl@localhost) by kirk.dlee.org (8.11.6/8.11.6) id g3SExLJ03246 for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 10:59:21 -0400 (EDT) (envelope-from dgl) Date: Sun, 28 Apr 2002 10:59:20 -0400 From: Doug Lee To: freebsd-questions@freebsd.org Subject: ppp(8), mpd, or something else for PPP over Ethernet? Message-ID: <20020428145920.GA537@kirk.dlee.org> Mail-Followup-To: Doug Lee , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.25i Organization: Bartimaeus Group Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Which do people think is best at making a PPP over Ethernet client out of a FreeBSD 4.5 box? I'm currently using ppp(8) per an example that came with it, but I'm getting unexplained dropouts in a Speak Freely link (UDP based), and when my system starts, my firewall configuration experiences a few bumps which I think are caused by chicken-egg types of issues. I've long used mpd for a VPN connection between FreeBSD boxen and thought I could add a config to it for this PPPoE (DSL) link... I'm not aware of alternatives outside of ppp and mpd, but if someone wants to make a case for one, I'll listen. Thanks much. -- Doug Lee dgl@visi.com http://www.visi.com/~dgl Bartimaeus Group doug@bartsite.com http://www.bartsite.com "Determine that the thing can and shall be done, and then...find the way." - Abraham Lincoln To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 8:13:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-1.visp.telinco.net (smtp-1.visp.telinco.net [212.1.130.1]) by hub.freebsd.org (Postfix) with ESMTP id A959B37B419 for ; Sun, 28 Apr 2002 08:13:08 -0700 (PDT) Received: from [212.1.152.183] (helo=me01) by smtp-1.visp.telinco.net with smtp (Exim 3.32 #1) id 171q5U-0003F1-00 for freebsd-questions@FreeBSD.ORG; Sun, 28 Apr 2002 15:55:40 +0100 Message-ID: <000e01c1eec7$6fc26d00$b79801d4@me01> From: "Philip Pereira" To: Subject: No-reason reboot Date: Sun, 28 Apr 2002 16:11:50 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey all, Can you figure this one out? I hope you can! Am running 4.5-RELEASE and have found that if I leave my machine on all night, it reboots at approximately 3am (local time - United Kingdom). I have checked the /var/log's, but can't find anything. The only thing helpful is in 'messages' which says: Apr 28 03:05:34 freeserver /kernel: WARNING: / was not properly dismounted Any ideas? Has it happened to anyone before? I can't seem to understand where it's coming from - I even checked my BIOS, but am not sure if it could be anything in there. I am running the following: Apache DHCP DNS Mgetty+sendfax To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 8:48:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from postino4.int.prima.com.ar (postino4.prima.com.ar [200.42.0.162]) by hub.freebsd.org (Postfix) with ESMTP id B1D2837B404; Sun, 28 Apr 2002 08:41:47 -0700 (PDT) Received: from pc (host18.200-43-174.telecom.net.ar [200.43.174.18] (may be forged)) by postino4.int.prima.com.ar (8.11.5/8.11.5) with SMTP id g3SEftI49989; Sun, 28 Apr 2002 11:42:00 -0300 (ART) Message-ID: <009501c1eec5$bf10c5c0$6e30fea9@pc> From: "RoosterStone" To: Subject: oportunidades hay pocas, vos decidis Date: Sun, 28 Apr 2002 11:41:48 -0300 MIME-Version: 1.0 Content-Type: multipart/related; type="multipart/alternative"; boundary="----=_NextPart_000_008D_01C1EEA9.B154E860" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_008D_01C1EEA9.B154E860 Content-Type: multipart/alternative; boundary="----=_NextPart_001_008E_01C1EEA9.B15E1020" ------=_NextPart_001_008E_01C1EEA9.B15E1020 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable =20 =20 Estimado =20 =20 En primer lugar, nuestro club es una empresa formada por = personas con los mismos objetivos e ilusiones. Somos personas que = queremos teletrabajar, por que sabemos todo lo que este tipo de trabajo = nos puede suponer, tanto en calidad de vida como en ingresos, adem=E1s = de ser personas que nos gusta todo el entorno de Internet.=20 =20 Nuestro club, esta pensado para recibir dos tipos de = ingresos, por un lado tenemos anunciadas en nuestras webs, empresas que = pagan por navegar, es decir por ver anuncios en un visor mientras = utilizas internet. Ej. Digital public paga 80 pts la hora de = utilizaci=F3n. (AFILIADOS BETA Y ALFA)=20 =20 Por otro lado esta la actividad que propone el club, que la = desarrollaremos mientras utilizamos visores y a la vez, generamos = ingresos dobles. Nuestro club tiene creado un software propio y = exclusivo para la red Hispana, y necesitamos personas o distribuidores = que nos ayuden a dar a conocer nuestro producto. Por esta segunda = actividad tambi=E9n recibir=E1s unos ingresos bastante altos, basados = en una matriz forzada de 3*8, la forma de pago m=E1s beneficiosa para = nuestros empleados y que garantizar=E1 ingresos fijos y crecientes. = (AFILIADOS ALFA)=20 =20 Te comento que hoy por hoy, el software que ha creado el = club de afiliados.com es =FAnico en la red hispana, tanto por su = completo contenido como por sus actualizaciones que ser=E1n constantes. = Este software consta de programas y de informaci=F3n continua y puntera, = todo ello para garantizar el trabajo de nuestros teletrabajadores.=20 Adem=E1s la forma de trabajar en el club, es lo m=E1s = parecido a una empresa de la calle, por el tratamiento que tenemos con = nuestros empleados, que ser=E1 constante, personal y con ayuda desde los = comienzos para ense=F1ar a realizar este tipo de trabajo, adem=E1s de la = seriedad y responsabilidad a la hora de efectuar nuestros pagos a los = trabajadores.=20 =20 El software del Club esta automatizado para la venta del = producto, desde la presentaci=F3n del mismo, hasta el env=EDo de = comisiones por ventas, dejando una m=EDnima y sencilla tarea al = teletrabajador.=20 =20 Te resalto que es una empresa de reciente creaci=F3n y las = posibilidades de integrar puestos importantes en nuestra empresa, son = verdaderas, dependiendo la seriedad con la que realices este trabajo.=20 =20 Ahora te emplazo a que conozcas nuestra empresa a trav=E9s = de las webs que hemos creado para ello.=20 http://www.clubdeafiliados.com/web.asp?asociado=3D2561 Te recuerdo que nuestra empresa, es totalmente diferente a = las ya existentes en la red, porque no es ninguna adaptaci=F3n de un = programa americano para la red hispana, y por el tratamiento personal y = de ayuda hac=EDa nuestros trabajadores.=20 =20 Aunque trabajes en Internet, y no podamos verte, estaremos = en permanente comunicaci=F3n para ayudarnos mutuamente en nuestro = trabajo.=20 =20 Si tienes cualquier duda o consulta, contacta de nuevo con = nosotros.=20 =20 http://www.clubdeafiliados.com/web.asp?asociado=3D2561 =20 = http://www.clubdeafiliados.com/centronegocios/centro.asp?asociado=3D2561 Un nuevo concepto del Teletrabajo con un=20 programa pensado para sus asociados =A1 Ahora todo esto est=E1 a tu alcance ! Trabaja desde tu hogar en una actividad muy rentable Para cualquier duda o pregunta, consultame de nuevo. Atentamente, gabriela gallardo id 2561 jackox@tutopia.com =20 Todos los derechos reservados ClubdeAfiliados.com=20 =20 =20 =20 ------=_NextPart_001_008E_01C1EEA9.B15E1020 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
 

 

 
3D"Afiliadosmembrete.gif=20

 =20

Estimado

 

 

En primer lugar, = nuestro club=20 es una empresa formada por personas con los mismos objetivos = e=20 ilusiones. Somos personas que queremos teletrabajar, por que = sabemos  todo = lo que=20 este tipo de trabajo nos puede suponer, tanto en calidad de = vida=20 como en ingresos, adem=E1s de ser personas que nos gusta = todo el=20 entorno de Internet.

 

Nuestro club, esta pensado para recibir dos = tipos de=20 ingresos, por un lado tenemos anunciadas = en=20 nuestras webs, empresas que pagan por navegar, es decir por = ver=20 anuncios en un visor mientras utilizas internet. Ej. Digital = public=20 paga 80 pts la hora de utilizaci=F3n. (AFILIADOS BETA Y = ALFA)=20

  =

Por otro lado esta = la actividad=20 que propone el club, que la desarrollaremos mientras = utilizamos=20 visores y a la vez, generamos ingresos dobles. Nuestro club = tiene=20 creado un software propio y exclusivo para =20 la red Hispana, y necesitamos personas o = distribuidores que=20 nos ayuden a dar a conocer nuestro producto. Por esta = segunda=20 actividad tambi=E9n =20 recibir=E1s unos ingresos bastante altos, basados en = una matriz=20 forzada de 3*8, =20 la forma de pago m=E1s beneficiosa para nuestros = empleados y=20 que =20 garantizar=E1 ingresos fijos y crecientes. (AFILIADOS = ALFA)

 =20

Te comento que hoy = por hoy, el=20 software que ha creado el club de afiliados.com es =FAnico = en la red=20 hispana, tanto por su completo contenido como por sus=20 actualizaciones que ser=E1n constantes. Este software consta = de=20 programas y de informaci=F3n continua y puntera, todo ello = para=20 garantizar el trabajo de nuestros teletrabajadores.=20

Adem=E1s la forma de = trabajar en el=20 club, es lo m=E1s parecido a una empresa de la calle, por el = tratamiento que tenemos con nuestros empleados, que ser=E1 = constante,=20 personal y con ayuda desde los comienzos para ense=F1ar a = realizar=20 este tipo de trabajo, adem=E1s de la seriedad y = responsabilidad a la=20 hora de efectuar nuestros pagos a los trabajadores.=20

 =20

El software del Club esta = automatizado =20 para la venta del producto, desde la presentaci=F3n = del mismo,=20 hasta el env=EDo de comisiones por ventas, dejando una = m=EDnima y=20 sencilla tarea al teletrabajador. =

 =20

Te resalto que es = una empresa de=20 reciente creaci=F3n y las posibilidades de integrar puestos=20 importantes en nuestra empresa, son verdaderas, dependiendo = la=20 seriedad con la que realices este trabajo.=20

 =20

Ahora te emplazo a = que conozcas=20 nuestra empresa a trav=E9s de las webs que hemos creado para = ello.=20

 

 http://www.clubdeafiliados.com/web.asp?asociado=3D2561

 

Te recuerdo que=20 nuestra empresa, es totalmente diferente a las ya existentes = en la=20 red, porque no es ninguna adaptaci=F3n de un programa = americano para=20 la red hispana, y por =20 el tratamiento personal y de ayuda hac=EDa nuestros=20 trabajadores. =

 =20

Aunque trabajes en Internet, y = no=20 podamos verte, estaremos en permanente comunicaci=F3n para = ayudarnos=20 mutuamente en nuestro trabajo.=20

 =20

Si tienes cualquier duda o = consulta,=20 contacta de nuevo con nosotros.=20

 =20

 

http://www.clubdeafiliados.com/centronegocios/centro.asp?= asociado=3D2561
      Un = nuevo concepto=20 del Teletrabajo con un=20

programa pensado para sus=20 asociados

=A1 Ahora=20 todo esto est=E1 a tu alcance !

Trabaja=20 desde tu hogar en una actividad muy = rentable

 

Para cualquier=20 duda o pregunta, consultame de nuevo.

Atentamente,

gabriela gallardo id = 2561

jackox@tutopia.com

Todos los=20 derechos reservados  = ClubdeAfiliados.com=20

 

 

 

 

------=_NextPart_001_008E_01C1EEA9.B15E1020-- ------=_NextPart_000_008D_01C1EEA9.B154E860 Content-Type: image/gif; name="Afiliadosmembrete.gif" Content-Transfer-Encoding: base64 Content-Location: http://www.clubdeafiliados.com/webayuda/images/Afiliadosmembrete.gif R0lGODlhyAE2ANcAAAcAAAgAABcAABoAABYPDyYPDykPDzUAADwAACYfHzUfHzUvL0MAAEwAAEcP D1MAAFsBAUQvL2QAAGwAAGcPD3cAAHwAAH8PD2cnJ3MfH3UvL0U/P1I/P1RPT19PT2FPT3RAQHtB QWRfX29fX3FfX3Nvb31vb4MAAIwAAIgPD5QAAJsAAJQPD5wPD4ofH5gfH6QAAKsBAaMPD64PD7QC Aq4QEKMfH6ofH7EQEI8vL4M/P40/P5kvL5I/P50/P6QvL6kvL7YgILEvL6M/P60/P7Q/P7sEBMIG Br4ICMUICMgHB9IHB8wKCtMLC70SEsMUFMUZGc0XF9AXF84ZGdIaGt0GBuAHB9kNDeEKCukCAugL C9wSEuESEtodHeEcHOgREbshIcQjI7gvL8wmJtQnJ9UrK7wwMMQyMro/P8Q/P9A2NtwjI+MmJtwr K+MsLOkkJOkuLt0zM+Q3N9s6OuA5Oeg2Nuk+PohYWJZcXKZPT7RPT79AQLpPT6tfX7NfX7tfX4N/ f4x/f5Zvb5t/f6Zvb6N/f6x/f7Rvb7xvb7J/f71/f8RBQcpCQsFPT9RFRdlHR9dISNxJScVQUMpR UcVfX9NTU9tWVtdYWN5aWuZHR+pDQ+FLS+pKSvFPT+hVVeBYWOlaWvBbW8tgYMNvb8tvb9hjY99o aM9wcMV/f81/f9VxcdJ/f994eONmZutmZuZoaOlra/BgYOJ1deR5eet6evFxcfF/f5KPj5qPj6iP j6Kfn6ifn7WPj8SPj7ifn8Ofn7Gvr7ivr8Ovr8G/v9aAgM2Pj9KPj9uBgdqPj82fn9Sfn96QkNuf n+SEhOqFheaIiOuIiPCFhfKLi+SSkuuUlOCfn+ubm/GVlfSentWvr9uvr+ShoeWvr82/v9O/v96/ v+K/v+ujo/CkpPStrfivr+uxsfOzs+q/v/a+vvi/v9DPz9vPz+bPz+Df3+7AwPPBwerPz/HPz/jD w/nPz/XR0e7f3/Pf3/jR0fvf3/fg4O/v7/fv7/ng4Pnv7/zw8P///yH/C05FVFNDQVBFMi4wAwHn AwAh+QQAAwAAACwAAAAAyAE2AAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPH jyBDihxJsqTJkyhTqlzJsqXLlzBjypxJs6bNmzhz6tzJs6fPn0CDCh1KtKjRo0iTKl3KtKnTp1Cj Sp1KtarVq1izat3KtavXr2DDih1LtqzZs2jTqn0JDxmxt9X6TTy37Zhdu+7srY3ozxy0v9DE3dub FpyKw4fBlQQHo3HjguccPyZ4LoZlywNFXd5MzGG/bYtoiB5N2kmpciObJVm9umMzKbBhc4S2pXbt hO822d69xQ0sf4TLGkasQjFJxpIhS4YBeXOMgcycX1bF8BgO0tixGwmzLaRq1klcN/9pEns274P+ dPNe3wVa8LHDERsfidyx8uSUnQ+EJ/2yXITxmJHdgKMZYSAj8Xz0HWuuMTHeeObtZhA9baxnYW2f APfeV/Eltthy99mX32YELWIiDs6dA+B12YFh4iSLMOIEaQYa4UR3roEXHkfNMOEghBvRJiFB/tBx oYVXXEHHhhwSV1xJ8KAhpZQhTrbflGjscZA9znVmUDwsjnbGNnoZZM8yZ4hWoxE4brRgazz66GMT s8UmG0G0rNcGLe/06QwdSQZ6hSxMdtXhky9Fhl9EXR4k4Gg4qMiQO2esaYQ7POrYoJxMcOSMnVIQ xM96r2hIkDhdCHrFO01980023xz/tM+r3+xDETu0xgoROOBoAw47G+3DqzK82uoQPL2CA89ChxrX T7JlMmQPr8zwGm1EiorIKGcGEWOZaGb8Z6Y77iQoUD+lrOnEtQjR40457tCj0Js7/pPPO+W8I+5C 9ODLqkA9cuopqARRU1ugryR0j6quKLWPIhdUUIEFFqSgyED79EHxxnnU808yPoQcMkL7HOLCxhac kEIfHitUjx8nxCzzC6gYO9E+qLyAws48o0CzzWb+wYKTLPzB7kDN9jOKk0Usm1AqNqwg9dQr3JDK vgJFiWWVzBGk9ZQEMWPiIs4FYWI156IYAw049BPP2CYmuE2YZ6AmULo1TpJQP8eE/2HpE8dgDfAR RzCYTyU6lsKPQuGUwWkZ1PwTsJwFhRPJ5ZcbZDnmkRTkzINACrRJE4F2YepBzqi6+FH75CDx6xvz sM8+PKC8cQrsKGL7QcmkYDvFMh+SkDIpyGx8zC8AKxE8PPTs/M4vOF2QMkM7SVwqBx2qDRDWq7AC Mwf1AwTV5Estg/QC1WelQNmu/09kJA7kbX+XeYnMZir2g9023Ay4zECTWJPdChKPJ1hqTU+QV0Ga QbjCJYEeUdDRaqagQIOUglOcKsXkfLTAH4VuIJ8DnedARydRiUMWc0iYQvqhKnEg5RCvg13sNPY7 iqUgD7srSDJqCDyZ9eEg7DieEP9V1rKH7ENnz3seC4D2D1TwrHuI+YNBDtUCKEptPgMpQvm2eIN9 qa9rA2kfGNkHg/gJZH70i4GXyGaZRQwEDKQRBRz9dy6/Hcgg5XDCAf+GKYIwsIFJeIIEWTOF1RFE FhjE4BQw2EEPGiSEDxqhCCuyCUG1gnUxfJ0PfMdDC2yShwX5Rg0/ebyLFeQFx0vBEITIg4g40Xkv IAISe4YKgmijZ4dhARG6p4yCHAoxNuAecVZgg331Y4tA0CL5sIc0EFHGmWFszGUIgkb6eWkzaBPI JAiUHSeYaxtr6uO59IhARhzwCfv6YwMdqIYxSNARBXlHIpkAiUXOs5FzeiQJJRn/yYqkLlCbOMo3 Mik7gfTudz4wVjY4ibKCnAxlvRhI745XxI8dzw8C2QfMjNdLh+yDBT1jwXzs8YOevQBjIOUZCzr6 j2JUL5detF4LjAMPYXrvewQBB/koQZBRUE0GOYUmGRc11GmG8S3VjMEi3qIi/vhHfgM6wzFUMaPR MGIgdjRCKQiiCktNYyDHsBR1BqLOBqohHwJ5RwTBU8F/WAKDpfgPNe7pR0by84P/gCReI/LPQB0l GZnMBkGy8TvlCUSUOTSo7ZJRkCAa74cDyYPxTkqQVcpsCA+BxxCGwDNtFOSVPBsIaHeGxX8cipnp sx76+lHFw6ygCAQxBvmwpkwh/zStmUR9n1B1K83nHKRRYTTjP/qHnTMMJB5VFU0fVUEDAzmBIOQ0 0FcJEtYaoZOs6zzCdQfyDh2N9R/9wCA8C5ZIfHLwriUE4T4rIg5VHUURmTTIQzcm38T+wwco88FB DmG8FBDkVahAxRBYKhBlHI8i6LOHS503kFmiQIoG0QNxKJta4ujBIEtz7QoIkorZFsQegjPtbsVY Jd8aBLjsuwwYCGKP7LTpH9sgzVb/EY/mGshc7lCXQfphqQEeI7vNMAjiWDPef8iTUwMciD0pV1eB LXC96p0kRcTxoCS9N74FwWFDs2xf20XUIN84nq4YUo/jldaI2kBESZ934X/Yw/95njWINpwUrUMZ Y4rDlF6Hf8oHZqAveyMOtGNMXBAUv0+4/wiTaCT1xtE8VyAzMtD//lHdOxrEnDU6BlizK06yagpg di3IW51M1lCTFcoC0Wt6J6LqK8fQILrbMkFiTd/D2m7MBTnelxti5ogouHlJ5JlxwOG8o7nZSfNp 1o6HOZ89b1EGRUjFn9MnaG0N1doEMXRljDqQ0JCG0QIRBWn6yAg1jRVvBpLqXe6SVSNcVSA/XudB 3uFAOEmOU2o4yAY71WQm+xHVeQU4X0HXBVe/Dtb2FQitKTYQxG6sogQp5UOOV0uPIiLYzivGQG7Z s4Q4Kc6mRfZBmD0QZ29xajf/KK1Oc/tFriHE0P/YDDeoub+CxHg0kz6GVQWC6T36/N2Uzu68AZkE tP6jFEmQU5H7fd5Sk/rUUk61wP/BD2pEbiGeAF0mDC4xhMt6IAu3QMNtB/GBpExmpuS18SrOENph nGdEwCLHQ4sQkVdYPiMnTrNPvkXwIU1q2G75M3M7EJizMQaiIAg31jaa77KPNJqm9M7/0XOfHxDo 8W7g0NdpdFWwhglLd7q/Qf100vczyqenOjXmMJ42MGQNoCOUUeD76oKE3eu1/ofDKYZrgpw9Zrtm yPFAvpDRPu8HqJg2sXvGxHPZPeR6N9PzTb4CezBjFOMrX50B7z7BR5PwAoF5/3Qsg4NocYnxNFgx ZSAP78nXZd3wt4sa1oR5I8jbIPS+v+TAE3rSj/7epQeAP4JeBPEIJPQvCGEOJGQOXFcBuMdwtpdY +7BYQPR7J9B7h2UQjiUzZ4YQwNYzQ4AK4NB8A/FmPdOBhyI9h0Jgd3cYekY+BNEPskU1PJU+U9N9 1eY+hcctBREElyEJBIEi37Z+oxF5OicaQMcQlTdjlGYgDdRWg6N/DAQeB+EIpiaATSd6WRhwURcO JBQHexMHoCMFIQYUtHdwEfh1CmdftcMxBxFrMmMsIMMDcTg9x0OCB+E8edB8xYAKvhItDgZhBfEH xMECOeUkgjgQGYYYHAaDBf/hU1MDBH/Hfb6Ug2OUbTyoeNjUbd8iGm40EMvAfpKHhAPRD+RiF0dj QDUyXU3ohEfAigNRCetUZPnnQFDYD1FwhfsGha3wOE8Wdf1ABSR0STuWdaDjDEhxhl2XhrkHdvbV C7dWEPvASTGTBwOxgTHDWJVlPK2UUwEWYASWArQ0RRknEMb3Z/CAiIdIZzFoA8QBWyVHPn6niI5o WlRzid53bToYfplIEJKwif+gCpcxGqIgF2BCGjiyTaIxVv0QXVpVENNgKdFSafYXBvtCD9n1Xf2Q XUzof/+3b7I3EGrAKY/QSKnHhaDzCAjYD+EAe6CzBmVohlg2awn3D7eHMQz/VTFjxg5tCDy45gL9 VUQbJTMsiArGg1mR1TM8cC3MU2wZlVI7wwLSAw8v5YLrSBxAUCb9IGHEMY//QH0yAHLwIANUA4/2 eIOVmFsk9lv9WIpmsBmScA6Hh3404G2kUSZzRAOTdnQ9NhDu4JBJSJH2F1cCYQ9qkF1tJYvrFA4D EQ50pYU+wpgC4ZgkaV6rBl5iSELj8QhSoJnjAYVEoYwOyIwQSJNqSFi2wwMhg1A6JESbhUqTZRBG eVm29DyblQcfyDOIQBDFcHxEUFLqeJXE0QJEQAStBUz7AonkYwNFoEw0OIlTk5bYtpYn1pZumUZ0 mR2fWGOjYS5u5pDuNgmV/2IpnSaY9vcEjMAI2XUEoVeLZuUIh3kE5cV0cqIGljCSGHR1kDkhnemZ /imZyTiTzqiGNlmTh9BJKFNQBeEDQyREhiVaR1kQnPV2PPMDTOQHGEccP4A1h/IDUHQYxPcPzklM fCc1KliP1KaWu7WD9bM3/5hGCpkdZSJuoqF+AwFOllcjjteKNWJO60k4T3A0qvCjDeQIhKMEW7hv VjhPPmJIHslvBUEPZOCfD7IESyAFoFkUovmAYkeaXapDCOpJJEg7DRozuHMQsxkzSIkxE/p2FnoQ Fxdsh0EEgtMshMhLBXFMVAMPf8B3qHWW0RlUKgp+MWedkOGD0tE21YAdOP+AIy02Gh0pEDhqeTvK owbSD/P3o51WivG5nuGgTkqgBObFBJjKpEE2qgjRD7KgmVZqpVLgDDE5FFtqexPTjGtIoAJRD/j1 OzygjQmhCLB5UWVnjhFqEMqQmybFgr5EBElEBCGKNCKXCsepAi3wrMZwU8QkEMxAlj/llYAqNdLp PtRZaIZqEPCgCiZiGZNgLuewTWAgCtFilzRgbJSyR2ewqfBmKeDVVeukBlk6EEO6TmPAKmUlqn4U qpSjqhgUBfpJnytEDa3wCFZKBo/QCuEQq3uxD8mgCBybDMOKEN/QC9+YDXjoa8rwjaigDNOGEPZw suBobAzRD8qQCqnwrAzeoQ00W7MYixLbZhnhUhGhOBp6kxDxsAx3QSYSYQ/TgBcN0Q/T0AzNkGQT wQ+f2gwXWyhYuxZz+bMSEbSiUX5ZG7ZiixT2oDaWEQTgJi0xKhp7ObZu+7Y+0bOXsQgztxDnQKNx BLd6u7c6MX7OgQNLhQznMLjnUA3EMAlCiB2Jx7eM27gyAQ+Iip39ASkv5riWe7ko0Q/EYLaSO5A0 UJCYG7qiaxKa+5adGwNgQAwwO7qs27oaYQ/IcAon4rMmQgzVsLqum7u6u7u827u++7vAG7zCO7zE W7zGe7yhGxAAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAE AAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALCUA CwCNAScAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq1Bhv2rFJjCodO+Zuo8mTKFOq XJmwXjJUQ4YgUrYv4j5lMGMS2YlKmT2WBO2lGjr0J0o0SJGSSrmIhlOn5xL2O+bEiNWrWCuVBMq1 K9BkPcL2IMTVh4WzFhQR/Ib2bEFFFk7I9TEwhdy7J1Ioc6hsCIq/gAP/fYGqJktwKxInBpcShmPH aJg+hYpwW1WsmLEyMuq1s+eLiSZUGN2jbFu1A9m2fRt37sA8ePEyVgjuheDbt/0YTolY8YrZJx9D ljw5qsFSTzMrN/Jk6+fn0BuGFl2hNFCzaFELVI2WdWu6AnvF/76bR6EfubjTA2ahTWVvxcBNCocR GWXT4scnO12eeVv0/wAWNB1ppmW3VlsWeOeaQOwMgYofduGV0Hl3AfaCH6hkiAoiRLCAGyq8+fZb Y8LVd9J9Txk3EDf6PXWGKiOpcoZyT8QT4I3RDVgdV3344KMPyRy4GkHJ/OjDIQehEhtCFN6VQmEJ aePHbX+g9N5iJD5mokkoUkYQGC2eoeJA9jCSWRg4punZdKJZFx13bkX0zZIGaRObbg3Z84Nge5kE jgq+xbfRfFtu1CUNY27TYikKHdOfmpBa9M1uCLG5o0D7fMPOQ+x84+k3FMGZoJx0ErRPhHL1eZA2 qBQT35SBwf/DkDZEpaJNPwn9CSiW/8CTCh98pMKNQ9yQghQlwwpEaEH9nOOss7Ia9OyzBi0SA34D naEfGLgqVApmaFpUDyE6lMvLbvXgoYMGd/zCoDfweoNQNnhoAAEEOhhSz0K/6ECBBBJoQMi+E42b A8AAX7CDuwl908cFE0R8QR+gHsTmBKV9k8NoFUxMaUHf5MHxyDkEadAhRpq8HYIFFfkjkgOhPAQP scU0xEDK4IXIPxQO9s8+flnYnkCw/kWEVKmooPTSSo/SbUG6wtcPHyKucIOgUN8wHww3RLUsQefA EMPYMRQqENlkVzt2igR9BKZT/i3UT2bOSfQLBffmjcE6/6z/g3feENyxjw6AG8QO4YDnbQhC+2iA 8OMUMAzR3Y8jHHEOmxa0Tx4Rd+55Hh//c3EPyYzM8QWZt2z66n0YhN1Z2v0jqndngSeQD+OV+sJd LwhUDHp/bY6bqnoEpipB8LDA9PIqtBAtQbruakwLVSvGDELMrLD1Y8x8PVDYYo9t9j9oj6322oge ZA83xzztLWbHUFQPBQ8kDgEF3vydeLmFE8SO/vaDAB4M0rjKVU5yDfmGAS13OUrtIweei2ADBeS5 C6zudB/7xgVXB7OBvC4tQuoOQeCCFtv9A3e5u4tA6oGXPoGjQihAhHqGtg8P+awgyWMe85wHNaZV r2pYg0di/7ZHxEKBj2zjK18Mzre2MVFkG5g5A0UI8YD62Q+AAcybqTKQRcDxoiCGgMACH5c6hmRg jADrXCIIwjkJSrB1BLkYdTYIx9eszgUbMx3BbneaEMZpICSsHUFQmMITCCRnckkBQWCoHhSwwCjF CMzQBvKD5bFgJ8wDgvuit6vEAKEINqjaDQxyA8U85gZIKWJBwBe+JJaPiWNz4kTOQQPMUEQHVbwX IfaRLvvhYR/74IX9CEIIwGlAXuMCHAV2sw+8Icxd+8DD48rTkF9ArmLBlEDnMjCQX0QwETWpRx8i WDGByLECa/xHPfLIsT3+wwUjAx2m+jCyOp6wj6lh2QjbYv/CZChCEX2IjYYEgoi73GwguwPeX/yg jKItdCA2RIEeCKKM5f2hW/3Qw/KOx0lAtQA42RPR9VYkIhgYg0xC2JoRhVO2gygRljGQpUT6kRyr UKSK9cMAQe6gTIKEsX8/018GKIUHwC1OIL+4F8COKpAdPM6dCeGFUwGGwH9os3MD2YHn0vmaz8Ux gvbchwU51guCmK6M7xyND6jJRwPlc0iA5OdB5iQhggzhLiB6DSPz+g9tCMYoMgQMQYjAtKMV5AVM swH0mDfSgRhDRHwgCNV8k4qC2EMG3hMIK4djkJcWxFpok6lE9GOEm+L0DgTJBuB0YKrEdRNwVW1m 3jQwkHr//MIQ6iqjNZ8ZEXbshh15SGPEVug5bmougruRI1QJEU+zjuxjaPUgPlcGV4EE0gImTE2p BHJXufD1H0qCIWf+Edi/7KxXgZlNP/6ytEnibHnP66hiDSID38iAIKX0jfsEQonM/mOz9HHpKz9b PtFGpEU2kghOH8BUgay2IPbSokCKmrfQ8bTCDPHG47j6ENvi4YwMpKY3O0cWg/TAc+W8mAsMokGO rXggq8tDL6JbkA/Gbnb7LOFct/uP7p7guy/ECwosG5jeCSSieQUHe5W233/YY6MD6egoDjJZxRil HyIqwkG44V8AuxJtMDUwRFpk2io2+B8PJgji7jWQNRsX/4yAkxdDHreDhwTzYAuMWMUuVlVzbnUg ozNIPUzn3AteoAe9gGpbYefHUcVVxyzmcXhPwNafxWbIBeFBYIxCBMBMFLyAURo4Rk3qUS+vsgLp KKoLkgoRzeZKK6DEQcDRZf+ebcAEAS3ZxOwQWuqnzAwuSJrbDNQ1s9YgP72XnBdCZ4dQDo0SKPE/ CIFii/3Zz51zU6FHs+0NVgeqNm407bC747rijHeHjc3HyouC2ZTXsKgIjA51OOVUL8+9A2l1oFIt olUXpNYlEjCYCRxahNgDGU0+iKIm4wRgn3nYAlkzBIh9r2PDOW/LVkizGZINaEsgB+WcdrUNcjGu BtoghP+GsbdHhrpBVsCt1BXhowUZaXOvEC9lhI1sChJvwOS15yiAt7znvTzD/qOjWPuHvuHDb8oi BOBaEnjaCL7rgsRDFW+rRkNUoZ9JOFzYebN4xIudNwocJNkQyDhC6jHNhoDYgDlIhKL5bG01Atpz 2mZQygViun1kQxE9WF0OXA5z2elz5uSuuQozfRc/EGTScjkvzgLz8/UccieYz3zmTx3l5Z3UIEvn Faz9HWWoc7Ygns11gQliBrTRYBENcYJ+lvF1gkD8HxIfSDHzpujc19Ybv6iqhhHGYYSwo3JxD7lB RhwxaRPkxJ1LsecGDzKSddtUvTirB0fD6LfK3LpyVbz/XAyCSLmkzk54MfJAgI6Cyv/lBxDhvL2Z RnqBjEJE0bIHZGdtehjgQOrmQ3WxRBCioES8tgwtMl4QsWAPF3YF4Xv/oFqKUxD1YEwDAThvJhCE 8DjZwBAKhDB1VhC/sAN9kAi/sC/1UFwEhFx35znLVU/dpnyBxzHa4QPcB0Le90fgB2kgw2MCQTNy 8QKGwUKxUQwE4VDuF3SaQ2oG0VGT1FGfVhBAICIEUV+KMUoGQQr9BwMHET5Tp3oF9z1KxC0JEQ+L UhEMCHYV94BA9Q8YUHZldGH3wlR5EGcD0UyPQymEsAN8GIL/cHwIU2k/83YT0IH/oFV2x0Z491We E1Zj/zUaZaVyNFgQMzgaNXiDN3Z4O0hzPWhzA8EOeMEDhjEeKTAb8CAYQ1M0RtdpFmIQf7A8nNFR KqCAsKZlA1EErsYs9RVwYLM1TnREXzgQujaAYIg2ZpBgBYEMOJCAaIhTDbiGataGwlR2v+AN2SBx yzQQEngvFJANfuc4CDNABDFVAEMQ/0J8BMMOeJYwqfFN4TROnoNAcjQBkbhOfddtFaAdpTMyl8h9 mVhd/3Bd2bUdPnhIeKEX+5BCMZECfyUQe/IXfMV+KGCE78U0UXh0mfQ0/TCFvvF5AhFSiqFJBEEJ pnR6qbY1QuA+q/AYYyMGBrEHqwc2SjQ2olANz3IMb/8zexaRhrbngNEoYRTXRRBQVRGWNwZEAVBF jhIQRx6HMF80EPDoRovIiBF0ARBkOs7XYqZzaOzEMaljg/4objnGiWtRkAZZSJcmGNRkD8ZzhxH1 F3+gDcqgUcsTH7KoAkCgDOCgDDagNIrRAu7TD1YYktwADtyAi77hGLZYeig5LP2wkizVCAaBBjFJ EMQwk+jTIk8hChfBkxfok0E5caZSlAEkjv4DQAbUZ0pZEOuIRvb0MxAklRNElROQAy7gOSxHKfs4 Gl25OtoGlpYolog3kLJjloeEKrkDhLcRLexHKcqAGzpUJYuVWESXGB7pWD+kGIOpPYt5ksIxA0Qk HI3/NRCUGYYFUYCYeS2ayZmd6YxqiC9sCJR3uHuJkwGGaDhF+Tj2eRCraSrBhUbFhynUJpXyREHZ xg4Q0zmj0XIEQU8ckw27uZVlBJz5KJybmHiduHgtoXPjIYrKCRh9UkOAIYg8A51MI53T2V5AQHQo WhAkmZ21CDWE0l/hOQNNVp5VdxCXmZ4tonXRsQ7xona1xQvlogOEcJ8J8QvqQgE6kAe/EDpIlQhS GqB/iAetuQMDoxAOk6ATMDHKNxBgIRZksQ9RWQEF+nxi0QM1wQ6VSBrgxo8WGpDhl6HjxxD1gAgJ FYSysg898wLAwW7HMxDF8JYosDQs8F2dxzTgsJHR/ykViCkiMjAsWSajAUejWzMDz0MQOEqM6iMJ 6XktOCAKChgppCoRk0IRmXKqEOESivANivYfORETSHqH4ABV+wAOmepXrcg4xcCKKPADelAMoyoQ QlErRsGXS1ME+HYQzMCRiUEJRlEE0iqtS4E8SaEUAsENKVUimUoQpDAD5mlwyCAKugYGi6AK3JBw pbqu7LqudJVINNYQySNJnTGsCtEPo7YR8MAMq8AN9tquABuwAqsRBYUXFAkRkRQYBzWwDNuwDvuw 0QGEBrWsCKENthEYogixGruxHNuxFbEPEss7MxFdewkhCuVI3eqxKruyLLuxQIOWMHsCf5GxLVuz Nj17swHbC8gZswd5sDj7s0AbtP+xD6iwszBLGFAqtEq7tEx7EtngByE7Hg6SdE1btVZ7tRRRaqSW tFhLqgEBACH5BAADAAAALDgACQB6ASkAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq VLhvo8ePIEOKHEmypMmT//Z9W/mNHcN6vfJcqECTpos+yeqh3Mmzp0+N6zr63OetqE6Q3xIR2sH0 l8geNWn2UFivT9SrFSxo7fPtp9evYCUKExSi7B1vELPh0fCgrdsQeLKdhECXrqGQiSTo1Zvo6dWp CBVhHax1q9CwiEXu68a422GPvkBIBrGOIAgGDTIXzJwZhMB1nEPfYbivEAW3qFNTMHRUZF27ePfy 9RsVcMF9eQbrLmyBR+vEwDV2Q0AcQbeQhRgoZ4B24GXOmzl7FvggNGdfCrNRyJy6O+q7rl+D//+Y V3bfkD0m1D6YW/fuwil+B59PcXjx4yCTL28u8DLmBtF1NlAI1mUWQkK+hObdgg+E8NhGr0Ewnkfl 7XUeSOmpJ5VBvbjXgyIgyhQVbzw8SN+JDtlHHH4f6accf//4pxlBoU33jy+FFEJgaAjxUiAGePBS VFG84IFBdxqYiFGEE25U4WzoTSDlhgTtMxNWh8j3zzc+1MTbISiG+ZCKxiG3HHOWKTejc5MJYtA+ 1h3kjXUYYJeQNyGkluRHTMZm3lNSTmmbQIJddYFcCR0yolZaiukoQWSyiJJ/mEUU520YhIaHQ76c 5tZoHvV5EVGPPSnBhR9lKGhBLmCVDENWef9pQR+P1mpQpBMNORGlAEJ0KUE+clYIQvUYEoIh/K3j aVt2IrSPWjpgoIMOvDQqkKi/aFDXHU4ttA8hFOyVQSIdmYrqP+wwpS4hB/2yQw/w9sBuQapKOWg9 WA2a0D6tyqrkRe0EE0w7BK0zSDD/VunLIIP4kvA/wgzyQcMS7ZNLCB9kLIikBXVzBwYIOBACxwJF us8gDij3AckClYbBmQzUaVBkk1Xm3JkFTQaCmwLNWSBnBwqUqYH/FBLagd4s26BQyrpFwb/ZHJka bAcxyY62EUKgQ8K/hCubXhmwY25B33y9w0GJBGqvQfVOoC+6yfSRQwWvNlSol4huFMgBfB//MIhA d/TtwDrd9P03QcE40DffhxfUDgZ9E4eBzQ354kBxmH/w4D4hYF6c5h1jLszLMDc70OMwnwnqQC6i efNyATZgo88/NxA07Q3ohPsD+yjd1p7/ZPPdQXgsWNfWBkVICNZZQwB8Qb98/TUFeXx9btmynW1Q 2mq/3fbbtzmE71W0bhTM4nzn4gv6B+RiOEHrs3/A6i1DHjlxgzdEpucIBD0QyPyT3GPIdDkEpI5j lEqdcobFujPBKIGxm13tiPYPQXBmUylRUJ68478NPgADBjEEgx6wreQ174QQoJ9A6uE16bkQSgPB 3l60VxDuBcp7anPbRq5UExd4JALyAyL6/xTHuIEUTn58M90g0Je5hnwggJhj0SCgWBz67Y84qQPh 6RSYusO07oE4o5F0BoK7AgVtRw0QxkC2w5kR8qJnqDEdC/WEBx205TV5u1bzdGAIPFAgazD6Bx7o IptxJWIHL7ye2dCWQxx2byNQucpG9iE4XwTDfnxzgC+6AYLFNY4DfeMAY0DJtwgQBJODWIfliqNG hawDc4IgWDcAiACetQNzk/vHLDFHsJJ5DgOyTNlyKNeNMzmoZ2fKRQP3kybYiVFALRuSdYpiMzY2 4DBobEBbKOCLbHjwAU8TCFvaQr/iOY0/SSMhXbQ4kOZ16x/1YB5dMNiyuuyFnv+InvQUmf89Rj6S Xo2EJFY2csQDBKJlRDToQITot8/0LQKHwWQrC8rOXFRxIaOTHEGmSJwPCISjITvMPgqIgNXt7zDF XA7P/pGLM1HuH3dQzs6W+aJmKieCB/mVQHjEOus8gD/ftJMvnEYQpb2RIMLDI0GyNq+BsCNrwHqN BDKwvX2SbZHbCyhA/5mRWEWFoH1rFgn6psyPvu8fS0wi4voGqnbkQmLN2kdx2LmQdvQSYiT16D9o 2TiBCGKuRsScCknHABu17jH7MNEXbcoAnBpEp//gDF0TFBoNEKQeqLFsSlDTHG+ghgIHOVJdmvqP rGnpDhHizyBfc9TLWpUgMtQLDQliQyn/zVYg39tIe6LikowUVIp9Y1FBD9dJvj2ob3Q9CEkfsg9f 3IGkxFGmXIvzUl3y0pfFKetABLEcB9CUAQ64g8MSstjX3fSZssspTwey3n+A5mgFMWdbjjLOBxyV F6jxH0HuoE6tLfU1yRUILyL0Th1EqLcF0YD1rtrPrKrttv/IrUYi+VXhBNeIFy7ZWUl5AIMkdCFP JM7DPnMHKsoScweJInZXVJBBhLFoXMSAIKoLY2aat7HotRF6e8Ve6OxYvzdCDaLkyzP5PkADQ0qy Oevy3+PJSVT/yECEEFK9P8EWqzXMIYQlnBEK1wSsfBNuhnV5VvuZsiAf6BuI77MQX1AR/wF2IlOK 2WxdOg/Exc6sMRcL+9Ly9ufFOx3jY9v7DzTCSAPwLdjw/iHCtpxxhN2hS5PpooMni6edU0bbgq/c 4Cw/mG1aRQg7rHUQHn7ZwmHGcKo1XMR/cNggmFwzcWhMEGFQcWWBLc6cWVxnXt/5xa3jogPu6ucY ATqygo4djwVitMystNCQ/QdqQIVfRwvkm5BW56QlZOm6jAeqmrZyDLFMWy2DmqtIJUSreiE+rOQB zAcQ86rJ3OpXF+ShC6HlQkDAPxlXV863UXGvy7RRYJ9pH2MhrHJWV2wI5li9PiajZAnSbM4EMr9w tHYFQ1DfbENg25U2iDegDG6D4GHT4/+WDWgdHKgthxqefbhAoCqQA4d06CrsRnW8Vb1zVjf0H3vj 20vb0Te9GiwQoBsIihVC0jolTOC5FvGKEdBXmC6Hna0jCOqWI5SGH7tGEF/TQBCdmdaW8dnSfkvG G/SQRt8R5N2m2j8M/BqEIFLcAomtXg6yA3Nv9YZVyqF6usKQfvEW3vLuOb1/Hr/5bfSsxT1AKyF2 gI4u5LqnQwAGPiCIjoS4lgUpsUanDmTC6lXPDJCULxzIbNbf2LHKNogwOEMBm9XDOuFcIcb/UW22 G6QeJuKvW0Kux7qsvCCGiFDe6F4XBBcV5XmXHt8l8OmC9B3d/8iD4Gu+kLvVBHwV+S3/zxPfuIQG w6F9s5n7+Hb6NEc36gj4n50rWBzv3qj+lHvlRaeOAMoJ40yN0zoMJBCrZ2Nel2eBBk2xZxBoBDxm xDqowTNutzpl4Smt1TJKQ1qAZBDyBAGtkXysJXKvlXKy4XwCcXctZxDXB3iwJXgTUD4IkQyDQXg6 l3jkd2eLwwEcdgCnR0lFNwj2Qxx3BXAwVX8bIwydUxw8M1L1t0mrVBxD+EvH0Q2XM0zfxQBltXU1 hXpghIDIpoA7dhCYJVlo8TMYUAhG9gB2InwPMB4dl1xp+FJZQ3wCkQ0RQlUDYYevkQEPogMjGH1f g08CcQF7ISXn8g8ruDZ/1z1aUhWD/wF+4Tdm4udzfYVJQ/RSacU+VAcpS/cPt/RmDnAYtvZmz3ZF nqMyBMFdqZNA58WFjFUQ/5FegxZxBaEsE+RTqSEUy9IsQzVtOlEPbNgWydU8dyAU2gFlAiFlr5EH h3Fyf7glLvROvCcbhqiCLycQ7OCC9pIIiQAiXhYVF0Bq9SGJ5Nhq9cM++VMQltg3OjZw8PNmHCN6 AYQBA4Q5IIU56fhnMrVnDOd6+tiKAhGL7ZiAYleL1lQgBxmBdYgav9FxIxRIKBQtWZN7AwGCr0EB eJAHf+RC/CQ9O/ALaiE9E0CDA5GIOmQQvKCNGuIeNGGCGbEYjCFSjSFSDDMIJJMLQv8UAYPwLygj OFXnXhlDHAWRUb9Ea7kAXcTReaFzH27mOaazD2fiC5aTRV7kj8bmhQIZdsv2e9mkKRXnFsDjQZo1 EE0DaYJYWq8BLigEARc4EMoYkdD3D97wNRnQQi90AXx3jQPRByrJkhdAkrbiSoxRHzWZC7R2OheT MYNwV1XSDTUpSyEWAtXVDjlSCHdAMOuQQMUIPzrzUg43EGoiiwuoEEiIezphQdyhATazDotWML6T GmhXfHahLCd0ltj4RyfEC4YQl3OZPfr0QqeSl9hHEMnQl4ORA+IYmMpZEe0QkyiRZPzBOWURAgMY TcJQCOO1QjmSRx2nJPuQhr8TSJj/5m3uhQFZ0yQFcTXuxGgQgHdyuUhd80IwaH1+Ryza54JX4QJ1 s5z82Z8McQehYToQYWS2ORBEYQiGICQjhhC/cAfTwhqkwQtYg5FH4Q0IeqGBlC7qsgPzUg/OuBcU cIglWZ8JUQ+80Dbq4QKEkEf+2aIuOhBjeB0SYWQU+aLi8wvcCJgfoRIrkZw2+qOBGSxA46M945AC CqRImqRKChYAah13MHlv4gsEkhoFuqRWeqVY+hFNakbUWZkch4sPUKVZOqZkWqYOIaS3+DPgdKRm 2qZu+qYw2pVpaiBECqd2eqdJug78NacyVqd4+qeA+qLewAtkMZ1lUQjVEqi1EhAAACH5BAADAAAA LFIACABgASsAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGB3uGxaoY0dc7TKKHEmypMmT KFOqJDmsZbCOIRXu+jCgpk2bCkjEXMmzp8+fQIM+9Nhx18mbNYclHBYBqVObOoVKnUr15EZggXYN 23lSHYevHEyURMrhKFKlB3c9XVvTgLqqcOPy3Ii2HS4OBQp8QLtwV1OnBka8NTnsZlmSZM3e5EuQ BNvHBozKnUz5oNevYgUWrnlY4E2BwJxKRghMwWPOXDNu5jzWsGKbjAWqPf04duXbEVfbnri6c2+C n/+pc1pgH8JAtG1GZukacfPWiwvuM7A2Z8cP1J8aMI67O0Tdqm36/xYP3ObAp7tHJEc6GuPqAZ1F JjbpNLZjpxFsM30a37v/pbCFx5pm5J1nnkC4BGLCTYEYFNpNCgQyDHft7KIeeyK91x9G80EX4ED7 PEWCQvchldp/KA4EnnsF/vPbQGBt+NcADRK0TwE2FYBLQvvQpNyJvD0nn5Aj1UcQLvgx5ONNI6bo pIofnvQiQxzYVONAyNVUwGAyEYkQdwC22A4wwHC5EEcmBAKMgS0OpE5LLZ1IF5xmenYWQUtGyWN2 N4H5JIorOlTnmW0qVGVNV/5zI2xzDhbIVzvKdlN7Be1y6ACBDeqia+1cOoACaybUKVIKvNUhgQwa 9B58Bhk5UDAmzP8YgUMLIhXMnwgNo6lA6gCzG0LteISLn26OACmxuu0zQgEKjECsooGYpqWzBF0W FpQDCgTWAFiyJWlNYl1aVq01RcAduQoctI+nk6pqmDp83hSpQfCutWp/qyaKaqH/uKpqILc2NBxS mcllggAFGLUuwrp+1R4uBQggQKnScSAxwrsSdPDFCFOaJU5mrgbMjAOYWxDJNpm873jZ9nvgPx87 JdCSIZFbwKolGzedTaGCiDKGBL0XgbRP9QxivEghjS9S+m7qpb8XJSlXIBxjdXHCEl9JNcdbEuQB xwg/SxAwYEtcwE6zkQrmaj8X/A+Sa42ALasrl1dTt2sJhOMAHwj/FHOeVn47gNwEXfhYyOthSiy5 yS2dakH3tnpnRuxyK5cCHCsQ8dVZC9RO2QJ09nnZhCOEOeiZLfpUwTibCONj3E05pct3++1tiDVF 2jpSZyvKJ5jtkBWI4S23PoKCSM/7T/Bk+Voikfm6+/TkGFUu1+gFBPK12btsL0CNI0gcgdUSD7Zx fuFLLLZwF4/QUgTi216Ts8DsXdy+g+/Tzozz7j0AWoaTjOzaFJzlvc8m7lPKigZ2k70wDnw8Gwjj Slcvm3AJZ6NhYLmOhJS+DSRthYoe5E5lp+hkJGY1WR9QhiExwp0uMxb7nt4kFpPtwVBioTqd0YIW sQKo6GICkVZn/9ImwBzFziYepF18cBQB3bVodgV8HaLmthNSSRAnoLFJwYiWLoLEjHUdLAgKwcQu YrHLcYEb4fRMiBEU/i8uLJThPzZWo601KI6+kdhhdmGCzthRIfsYzP6A+LmaGE1ahFtNEv8hrVmV MD6pGWDLoqitNDrNcgIhWcFU90Yleu5xA2Fetla1Q1EmZSDxWqTgWnbJKaqRX1CziBt/tcLOwcyW cWzQLmwpECAeBBcS88BC9tE9jpWFhSnE04BWk6glsQk+uxCbJOlWQkxKkUZzI4inmpnGGeHPNvGa WzILEq95Mc0gpqQm/rD5SlbSTk8WYVxNMvaTXIIGl53740B8qf8qPSokEJvj2I6AKQBrwuxAq2nP x56ZsmEF7YkEfNk1rxSomCUKbnQznHEwOgBcwAlOJBOnQSuZRg12siAkFOFD1wjPilgPjviUoz23 xpgY5sqfCEkf2Ey2NYMu9JKM+ek7eXdBiE5SoiRlp6JsMhoQJopt8nujG2uDPwMcZJvr3E1Kz9lO dVbzlDx6yM/kYk8XxbRBW1Pe5m4aOoTsknTc6akYEaonoT6md5dkmTop+Y9LJQqR4lwk7mr3MaVM lS1o0dBVH7cqrUKPqyuFJfWqZYKcPMQpXYRLWTfbubcmip8FIeiGBKLTiQWCK2Qr6Fw/ta/2kItN HLCLJutG22r/GsSvhdMSiCCE0gOlzbCJ6+R7MqtNxk6WoWh0JQdZClbPRQuLAnNKkzR7Vs10Lo7C 5FX82uGBr2CJlwWJYQS4dMGLceVQh2FmcWvnySzWpIvTjA9fcTuQBw1gNP4bAFeCY19arrcmMVnV YtOYTseGELJ4kywb//Ez/w7keTWh1FQ4K1Nb9jCuLVye2QYCPwFEqh0tGUwMrzS68f7jYvMabGZm t7fOtMmbeZ2bfJHaV0sG8b3cwSqvglPYhhANk6t6VjkZKuF0JlepCXYn1DjqToPszHUwrbCUwRfM jWxOMqfb0VsFEJOtHWZ72f2HTo2zPQXENYKtjEnaStcnDtN1/5QRZe9EK4VA0t4ErzGLKloUxIGh FcSUjmzlAEpJvR9P94NbbaBBUHjor55UOE+RcEEAx7fJULhGFAabD/0GOj/ilKACiEAgOiyA7Ka2 ZMMzIv7GVz+mPjMCIQFhbaFIY/oSZEZyk6cCdsHRwzgzkwv+okj7M8aB5Im4SWXlqpA9RwQ7OjaV MwAtIdxc6k7ZunKcY9l61o6AXowvXhbIjUAnAL5Y7CkUxQlxRCq1+NptpLYOpf80R5vMSMuqCLqJ ykA4aHZn8FT8ThS/vYoz5THS2UN9tKCthKyfebUqwZIQrxw2cQ60R6cJqxTYEhXue5bNbd0uqL4j O/B52bdyHf+ddZzhbeP6Ble/y2vRk9/bZyuye3B8TJ6NnBKIfexjqkfGVMDe5hSDJ9w2lBZPRzjw 45tsB1cIUUcgQHKQdhjLA7HhSFaCRupd0+vHJvCTbkBYumbfjXglk7Han3nblqsovzZh8uDyrVyi n8Zow30Ms9F+mqCXq+ZOGVQsfffyBUOdJxNSCEeo7uSWGGcYH+CAvnbxEb+1GEzWAuNR5ZzUpoUS 7bMCocqIVqekt1xDckezjZBmmESn7DTMPrplWJ8cSR/+9mdSjW3eBCfnVj6UCQoLd4DxlZ4LLvZ8 z530WJN8o68zZYNVNtOoLa+DDJ5XtGeLW3DPff8QbYcM4aTK5100gqYogAOM/7NHPpCZQPBpOUtB mslcP0XqV9r6x7WR6aULpO77Hy4Y1TUaMSP3YxWU52Di9igUpxlwAgyUEnEdYQKSsQtIM36ypxDq QALZlxP9938eSBVEczMNsT+g9IFjUxQqVC2OJyiU5xG7QE8mGIMrhBQj0IE/l18qI4M6uIM8uBBy J2q+AieB8AFwJ4A9eIRI2IOpRxtGmIRO+IQe2GqJE1tQWIVWyH3Kkhxed4Vc2IV/Yhco1yzg54Vk WIbd0ShmyH0BAQAh+QQAAwAAACxxAAcAMAEsAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaJE YCI2AACwYcOtdhZDihxJsqTJkyhTNgQGqCUgkAhvEdhIs+YGmCpz6tzJsydPfcOCDtM3UiPNYQf1 dajJlCYBXT6jSp1KNaI6oUQrDquJVKTRjV0Lfm3aFGrVs2jTEtSnC9AGQLfUkfwaduLWo0W5GhRB tu9Gs2oDC4YYVG47ETM3ZD0IaCbTDXJD0rV4F2xevASB+fVLYPHgz2fVdTQLaCMggXc3/NNMU7VB fWPLSsZMsTKAuhXH4k5ANkGHjH1FgB5eUfRtiXdP/ysNQHnqf7YBRCa4YPNfi5O16vW6XSDrmgSA rf9lzhQ38fML75pnmFwgc+cbXTO9VZA8zepN1zvMXrs7dv98gYcTQdEBIBx6CKZnWUTtLWcaavEJ VIIujiknUDs1dRBWO4055RlE/NnlX27+OUabQbcwRUCCLCKkHnIPOticQKJtUAJBRln4T4AAALYW fjNOFCKMJ5JIW3SuJQTkdS02CeFxIb2nUI4EOXYjQvrg1xlC7QT1oUCTcfjWgAXpAwhvCyBlW11t uVRQjR1dOZBuA+nClHgK2VnTgU62+GKUMSJEpXcbJQBUUP/AlkAJRKlDk48C6cMjAXLOeZQ6JhIw 3Y9M6bImjjUVZFuSYI4ITAm8fVkQhjb1qdKmSbX/Bas+t0xIIFg1wgoMbwAsMF2NpMWoTnWuxXZc CX9Vpg6PrgW4QJlLbsRnqX+ZuBEBZP5jbHP+jSVqq6AWOVC2B0XrakLAbCCeLht4CkhXsAWg2EBZ BhAeQpjSRF+kQPJ5FzCOYTtQdFtCF6OUBnNErV5GAfVop/+wCsCAS5GF58LWtlaQntbV5e2tGoe7 IEWxwXpuogTY207KlAag3AYBxMwnIDHbqyrMAdAEk31QpranpUxd2SDCz2mb3z8RIr1RtAkIVDFg jvbVNNCbDRhtXx6HCnLSVENJEc/69QlMzTjb6/I/6tQcM0wp17wvQe3UrG+iTblWIAArCtTbk8oR /520sUPFuJl4KQLQwUA8JgAIjz12TcAtwCwpZ9T6tlN4t1oPDG7XYTcE9sn1BbBABzEvIELMp5Vg b2Nnpx3ALQvIa5AuMUPO2+F6ijAMfiBV9hGvSLFqqNETJ9x3jEVfhZ/uDjf+z5K3cCyc8AMFnBV5 fI61rz4mPivQ5UH+A77XxG/0bcicW8QzpCfTDAz3rz9/NsxQ0awa7c+OnTdBt4junsJ8mRprxHOX qRWOPg3SjK+M978gFY1a8IHSV7zHnLzxqlE0kZM+nEK1qX0vcxXDm2eslTWanI9rCyOfRManI9CR DikwQ4rqThOzRtkLbSXYV8zwlSjeqKY6cnrQXf8OFLXTNEgfixka8lA4qD8hK0YSk4tRkPKdEgIg K1+ZFuWKVz5S7QhzJtyawkSmwojwrIUni6G2AoAUmtFwfzssSMzWYybHHC5QGlFNg5R2uMqIgExK dCATlwgl8lgIP/W7Dnk880QJ0qSF2zFRC+1jRQCccIzpqwjP3ga6NbaRjctxWdqSFEeCzNEgmMrZ dUaWRwbqTWHR6cB0AhlBUjWRSRyzUIBOU7jTkEcoQeFRV4bEKyjVhJMJG1n5LClGL9JJk+Xp5JxA SbNPvkt2AinlQE4Jt7blbEushOVGLhahu+GJlk+yJRQJGT7m9PFB24JY+XDzFbOM6FNdu6QzRxT/ kUYqE3RqrGYoATHKbQbAINwcCM1qloDIhFOP4xxIOffmSr9hkngW2sjh0JbBgRQOojOKZ01eVqSv KOeeYDRfM8XCT7Z4cErRlKYnQ2nNf9wwmweVIyhxFDPFEYRJRgNpRsXZnHTRhIAHI6Q6w6eR/aHv OXc5nEgfuTB6PuqV/8RnCvXJ0hO1owSO6ZxAiqlSmQaUmmerIdp2qDodBuBDMNuoPiIzEwvxRjh7 3MiN0InOhC3VQszBU8A0R1TXdAmYwcQMMTFTk4s9SZkfIywKlxkWjm0EmahkivfMitaa0k98slPd jcaW07bA8Gziw5vRNsoqI2qUb64cYkWVGi4L/0XtQF+JDHOEqpBfLgyZkaQqQShJRq6SMSzR2WxM mDKtTp61pqpLgEwCcCPaEWAYMCvW/AKw0eo8izkgCWzCtvREpPbqSe8MkkX/ShBeSZEmBwoQb/XB kg74KLcLq5TEpJPfgvizksbNJFbFRS+yOo+zn6xp3NQWPLXFb42+7GkCcnajqC2KJkTxI4U20ru5 Vcy16qUt0HRUuAXA5pjfEY6eTiOxJG0wjOV7qWUHEkLlPi+l5BtVV5UZwqUlhGcFQzBNByqQ08Us SWULAExgxmIH8/fGP0sYWad2NwAgMKmCvOigBsKrBGTsmDIySzF3hr5nlm+z9sFJdCrJScvu8/9E lpXWQeJsIJkepEtEsRy8sruYVAYAMEyWkNrkZBuBJcyyx+sVU+TS1wdi9JJ+eS+UGqk4xr1tLJr6 YkcfO8YsxTSFQR7Lm//5ZciMq8c0MZmdJUJfWLUDJ255y8Zm0lDCDuOJJi7yRrgXskYPMnwD8adG azI1x2Rlv01ZzFSVOWVUHa1rvQLJ+CpF2fpIbQNf1uuq1QIUhdSqz4hShw+zAqwG1rK2B/FnAlZ2 1NUUiiCoFu7CGHcfa5OFhGTcDDLNzGXrNCXI2w74Qq6yqTZ1BRDACMuyFrBAgD1F13Wm19VyTbXd PZte2QZfJUVKJn7TyN/gUbXARx4Ro7Dvzle/hdtYRADXS1mL2oRiyrtwzO66GcTjAqGzX05O8p47 pHAAR0jFgn6hoJCLXo3SSAJ4/o8Na1ury2z6v02G85xnm9hi9bnWk+IYL84OvlKxHEGTQpCruAk6 xcz0zfk5Lno7hVFbjztEGjmvg4BP5AhiiWMPcpWhLIQtJeiIjXShKrkbnutOGXukdLGk5h7+8ZAP yXf8PbzIW/7yE9H51DHP+c43RPM0qbXnR0/6VcUbAD4tvepXT1+X3CLrq0dLQAAAIfkEAAMAAAAs kwAGAOkALQAACP8A/wkcSLCgwYMIEypcyLChw4cQIy7UB2gBgAQi2kncyLGjx48gQ4qMqG/YMGAa CbZLAKBlSwLqRsqcSbOmzZsEh7kcRlCfRZcuYeIcSrSoUYe6NhAA9FBnS54DAQGduuCo1atYmwLq 4FAqAKYOnQKA+q/d1LO3sqpdC7Jdhw0iYnZtOfdr050DS5ydmoCt378DTf4TAaBEQXUEgspl6LUu 2IZiybLcCxQY4MtFNxiWypOuy5T/9E0Oqq9hY9MtHzOMLFAd0AUa9XUAKgKzbY4lDCsEsOEf5390 J+uKurc2Y7qo7YbF++9WUND/NgS9TR3iht67e/+mK135v8kElH7/Pg7A8d2nAgmnLmjW5eLq8BFe X8jb91jg5YHNBguspXF96qW10GnkqbYQa//8BAB0As3WkoDxRVjQfNnZx9MGXDWnnF5VEWRRhwoR iJA6GnllYEElpYSgSyASpItLxkkoY3TYHUeWQDqBJZ1lObUEnT633NiYLgucSBhMJgpEpHfdgYWg CInFSJBrLdU4Y4QU2lhQjqUBQEA7w7QDDAGWscRjWYkBMJxAXol15j8vtpRAkvYxud4/CIYGCIQF sXjlZWAORFFK1+lX2j+IkdngZvclVidvZokgVUUX2afbPw56eahX3VU60GgA/AQWndHdmedCo/1J ky5imlRabq0R/8CnPonpRliH17EkYHd9AafdfXR5xZtOt0zqEjCuYdeeSwIKC5RcVJ416p2lKneq Qp2qKpM+hS1g0TBUxkRYr0q+VJZ70aXZG7fo1rddecJu8OIwzhYGHAECOfcam3sJqK+0/NppLXMM dcqgth3ppOAw+jL102J6taROnHZ1Wp5YavpqIX6PbiCVOv3tK11ps8k6WcBkOpihypi6NK3AThK8 UKc3ItzRLQSwJN0wHXjLFQCEnblBAvPqpUt4pd4inTo5usaUu8CW145zcUmFp5z6DnYfS4aFzJNX tbXX4cPn3klqkzjKrFCmNdu80VbOmTWMvEpz247HA+E91nw9l/+qz7w68SSrxu+mzZTVTjHFEr1R Q/VgnTz+JJC5Ak328mNoX41ecve57REggMwNXOA6AYipau24Nvfh5Sl1tUn3HQp1Z+VdzTqi6AXd HyDsHmoR6wumh1yVeZtNbebXJqRe555zBLroYwFQUu2+qYZY9Ew5RyPuoYcK2uwc227f5PdNmqNT xQNP3ILtZVjn5cUPvHnBajcP0fO9RT95VDW2k6ZZTNHJ9oDTPS857le0M9z48MOT3Z3vKSaxyK+o 16bErQ9+AkFe/eSzQfuZJnT5EyBw+JcXORHwagP8ilgI0CUEhi9H9unSfXTSAbOUAGMumeD6YOcd Op3NVB00iMH/PPg2EI6udhSsUXcsYxcBUkiFQBkO+JADw/7whCXD0Un+NoBD4hGogtTy4fGAOD88 rUmILiFiEaFXOgGWBhCX8tKamti6dUFxSbWZYu1gqJPhSCeA9RnWXnQYMB4+RowwS9v8pHKpPqVR jRHB3xFh58THZOyKt9tAVfoYOG5tcWNUtAu3DCMdw2jRVyUxSQShRkEIhtF4idRc535iJUH5CZL3 M+LedHGLBQiwSOowTKMAAZd/6KVUrwvc9vSowH8QoCrS6c0p6zMhoNVpfeqg0iFhiTkydm46BhFL LXE5IF0OQwQLSMAGRqkmARKgBK7RRQf6soDeSGdqYyFWgj5Z/zjxtawdesFXf/LHFXrJ5Y912tTw qKk15fxQfp3r1HvyBSNyPkSSY2mYMyXmxJ04hyVckc48pfciXwbShaEEi3NA96DZiACGLeHRetqU wYUqEZbu0+DmMnUiBZ3RogvRhS7Y2J6YlAyFEcNXtNIiHi896qSg3KNyzPLMqXTPYfbyWp0ElJhe nYx8DiVeTSEKlX+RS5E+AqpE9PFG3cDQNbiz5nfSep3EcEUqoiJc1JqZoL0I1S4lA8ZPSmTCOGFn if8IWVhbIjtvQiVa3hENONUKkkMRBBgiOFR/BJQbwgxHL/piIkql+hiKjUYdUrHMvygnrAWkSTcR 86WCXkbHmP+ilSxpaskNgQEqKVHWKkBqzTB8kiHNRJWv1SoBS/oyG54syz8oq4xAFGvVgOk2t1DJ 0/IoA4CJ/hY+gilL6PAUE9mM5UVpYcmhLAYVsJFGIOxyieWiOxUVEayLfPmu5yxiEI1QdSDXs1ch KzqQTC0Fltt16m0JYrGztE2/V5rNTwfiHCuhlk9TY8qRLCtLli4WENuN0anwK1YII6zCB2HJiRSC EoMcraBwXJOJ/HdftUWMKhw28Z+oxKc6efcmR8sYgLvTthvL6WA6vtJPIKQvfEmoHcQswYSTrCrT Ds1lVM5yVmi1ly9p+ctWoS6zwExmo1AMumVO81B4hqE3qZkDJgEBACH5BAADAAAALLYABQCOAC4A AAj/AP8JHEiwoMGDCBMqXChQnT6GECNKnEixosWJCURc3Mixo8ePAnWpUwcgAciTKFN2fCgQ0DBd AAC0U0mzps2CLge6BBRz2M2fQDmW0Omz5TARMW8FXcoU4a2i/zYQJbohJqCmWJe2G7pgqECpRqku IOA1q1mV6gABkgoAbNSpRgnoEuH2rF2OugQOU5ugXcmBbnMaBaDuVt27iCle/beX5zACAADD/ecy 8rDDiTMzXNxYxMsOksMOZmxSs+nNegHpUr23KNh2OfXBfvxPX+TTuBEupkz5KrBhDjdcXXu58VGB t3Mr18kcUAl1JYZF30AgaoLiaofN/Jd8OW7ZLp8D/zK8YUEHYMKrtquKXTB375r1qRsG7J8IEWo3 rF5LN/9aAMP0tIFxA3UHn12AdJBgVMJ1IJx/G+AHAF0ACkggcgcmtlYJUi2wgYMPrrWWcB5uMKCH 7UFlYIZZ3YKURl1tUAJ+apWAXglqOajLZR2kWCCLd62GX1Rr7adWeEcSBwh+PmII5FmNKYXjgDtl p9Z+VGaXpYpPQpndPwoO6NmRez2V3zAKurTlj11mRWB6jzW20zBHcXiZlhe+1yZWbxIHwC1kjheg iXeqmeeKe/5EYJgBJmlcWwM+mCJLiCZqU2P1AXqio0dCWmiKeelpaVBy/gMMcTgmqeBTdkq6ZWmV jv6q0l4K6gJnkv75RJyrjzopq6I84ZcerrmmNWCqKUbm169ANSZcAg72R2YCWWZpaHaWLcDsT4Ul OCKFjra1F12fXVvZfJhtOyswunSgIFLh6lfidAMSYNx1a6m7lDq66HILAEnaJhyk9i6wQICAqlmC g/o21c6OR/5DwLDs9dSWllY1bFY72t2i6X/DJFAhwC51kLHGZl2lz5K2RkbdYyTvFVOoKGN1VVrA tGMYg5cB6NK/ANac1VV0DqROb5fZ61KAALAkNFOA6LNjQSyps8HKw9im7dNNAQJMdAkd3c5DwnHd FDAJELAdQ06bTWpMbiunddzKZUR3bl7fLVBAAAAh+QQAAwAAACyzAAUATAAuAAAI/wD/CfyXbt7A gwgTKlzIsKHDhrGsWLH1sKLFixgJSpSIT+C8WOkyihzpkNNGK6AEppu4sB/Jlxb7nbTyRSVLhbas wNzJcNxMKwZXUsSpUyEdgzxHRpwpTePQhDkXVkGnsN+mV0kZ2pH45YtEWE4XRlU4VeGrJUusCbRG BV/HrBK99OuHxYqdsESlUk3YBG0kgZiUzBo8y1o8mDKtNP0Hy4oXvFCLJiyLcBzaJUpcqhFMeNY5 hKYwrrTydjRkhGMn7z14lgoVJVQ3d/aMMA1Gn1gGJj59MDVCygfnUOmHT/A/NbNpH7R9MefdgXXT Cf03b7XAqNYFAh+4BJrAT1jVoP8bZ43w5+UYc3I6aAdOv+lbBdq5mxNdFWwC+3nBV7af93/9LHHY P9bMcdxegynEnEU5PfUPfmHF9898/+QEShXr/SNNFbCUBUta/6DTRD9t4FMgPuIJlGBCC1YEyk0I ocOShBTSYoUbVVQhEB1V8EhVF0ts8s84c1izxCuzCKYEcoRVY885SNjzjym2xQPPP1I2tJWDA8lI EY132ZhjFQZdMSY6+KDVxT+0fPLJEmUkmSSTg7FyDitGOEmDGP9QQsk/OCAjECXw2GNMP+AUuqVC Xk5YVI1jlhUpOuhcxiYtc2A2yxxzdmZnGkbYSQMN/0CBQz8x/PnPDcYwAwQ4QOj/UcxWi8U446Nh YohNFbTYt4mPtBy5BDqfsKWEYJwu6ek5oDbCyqj/xBDDOTGgIRAMqaSyAjgq/JDKVtkJ1CiNdLBZ hTT89VrFONBMRUsb/ww7R6WfIItPGeURZicU1aTByiU02COGGMhQYm0/QvBRBBDa2NDCt1aEG+Kt O5ZLi6TqUjrVJ+W2QWSl/8A2RzziLVsGs/ueQ8kqLP8JzipF8JHtzOAySvE/dFgsKSz2hTgVHbT8 MwemtDQRMjrzlqzvZygzew7Lq5Di0svZapMKOKmgshWEtn5ZVM7mVnwxgD8HPfS8BopMMjrL/sNK Gmk4DfUMU6/yz9V4aw3jQeN+/62z2Dr+8/Mn6LRBCxVIH63GgcueYwTccnOzSgx2g8PM3VhjrTeX 4t4M9tg4Ax34z5cFmzhsiytd5zmXPB533KucQ6214ICDed6LDjRO5xTR4XfYoYNOOlqmp41O6mwv DSrksMuOxgz/gGPM7Zq/6KAduzfqe8XA5yw8OnSULm/I8TDB+NJGNML807GfA0P0qfSDt+Y5gTWQ F1jgI2PQ24fevegCGRYdCIcmecVDCf8wn+pYYSckMOsSclsFN/pBu5kxI2/OOYhEqmMF/gXucx8E YLyQFrQAIg0dSkDR+WbBQKf5K4KkYAYamGGMVCgsW/S70UDwIZGJeZAqbtCZQf8GuKt/xENeQRtH gJA2DtStsIViQBk3aMCslZFCCBIUQhGKYIPaZU1GkgGjD//BCUnpjCq8so/+5CWkJoyjCeigwis4 80Q7GYFKbyPVDGZALSyCYwWj0JYXUQFGpNjoMfszFxrPKLiMWQYd7xrhvI6lBCqoRWkMtOPjqgEt aaEKDasAxw1SwYwi1E4ZyvjHVwTiBiuUyz5Buxg6+tEjc9FiHmmsAjQ+BMklFC9JlIxN8jJ5DihA IW40gMI/4AaoGMKDUP243EHqgoV5YEMiKYGlubAxjlpezA0XwwYtr3CFYRkJLUJD4bHMdz5ipkF9 /ZhBaJAhKG5kiSG+20iOmqLyzW/iSGdnEtwSykkptBhtXk2IhBL+0k5WVCMez6gG00RysUiVpZ9j ugJAc+SSNiwhfFTxyz8+MYtIsAVN/bCGPVaaFepYNHDa3FWOQLiJKlzhO74c1j82AaLBvOVALUUI FiKVIW3ap0cgbNcnBGKZeNCiI/F4hUs2dZApSCwpFxoThLQpOF6BDRt0wMcVVqMWRhlNIPg4QlAR QpccPUZcvBLIhfAxj5/+w64MOeDuCMTOtQ4EG1jwAlIAtJp+DHYkSjBQP6awOL86diFlUEIZpqCE 0Dz2sqyh5BH2ilnMHnCdnQ3tcY41C9F2Nh6MdYljAwIAIfkEAAMAAAAscQAFALIALgAACP8A/wkc SLCgwYMIEypcyLChw4cQI0p8iC9atFrS5k3cyLGjx48gIc7TZKWkSU0aQ6pcybJlyHFcTMq0wiUl wXRWsmSx47Knz58f580cigVfQZwleU6MZacTNqBQo3Lsx2boUDhHTSqVaEfn1oe2whqVSpalK6tW nw5EauUrxK47JerMkm5iulB2OGHrV7YvPrRWv9zUuhGu24Zz60YMNROOzYHzvLTthw8dur4go83k Ii1dumgxZSr+x/awQ8NydY52yJgoX4J2TM6zVVIgnSq0/s2jQwfzw9Al67wWOA+4lVhrCU9EHTEx RNpoORWU+Q+6bdz/0FWp4vDVnLJCTdb/NDhOpmCBpQt7TU2Xokwsdr6IHoiOuvV/t3Nr595wzpKy mpnkCkJwyPRaesut15xqD4FikjRrFWgFKPSVZMs41dWGH3b7OeRfWSSZNJZB0sxHmnJcKfjPiAs5 11A/WJSk1kD9SGbFa/VZcdk/2PB2nX7befgfWTKxkdBfJcGhGIICUQeZHVDOiBo2WmTh2EHS5GWU i2tJw6JA2JREIXklYZidhgblJ9GHUvUj04AJeQELi0z+4yR6JtkykGHjzGXlcAJJM9cX/XDZT2wy FsRJSXzFYgWEnuEjGSwC5YiQmhGxGVWOJUUTUZ13nmjhnl594WcWeg6Ez6mhcOmoTGYK/xQjhWEy amGJPCGa1D+0WOHFj7rRsclAsFSxBKUDQTNHPJr2Aw00BOEzzpcc1VrmpyjaadJgowoE16k6aUFQ LKdWyeCKQ50nKobyiWlheP/o2havQW4IJH/YbLfEEjuis+8cms6hhBKzCNQPE0ccsSNBphhhykDV IFGNQOfYg8zEppzzT4AlLewQqNsm1228M50aq6l+mvjqTIqVaIVuMkmIYW3y9kZLvWp2+I8b+i7x iUCf7LsEFUOiM7ASTPD1ihIJQ1KQPUcYYYQ9/9gjNRJ80XAJDTOcQwMUG8vkcUMgoymqFamSbNJe i3YbnhVfjLOyFYq1C4c0EiL3j4M8wf9iVV1u6FgzvfzlXG/PS/T2TxNC7wv00UpY848aTCdc0CxR GzHxM1Jr/g8NSNBAgxg0xAAPxzpiu+tAobKVtq6hCITkvDyaZKaEdKNbklFIKRWbnjLrells6Mzj cvGEA9uhdl046zg++6LziuP/UEEwJkpg8g/S45ShMEFqHNHww2kYcYn5n9PQiOhpxHAO6oCSnW3r ee5p+0Bti5uhFfr/43LuvRtIu5pkhZlN6B/l0RDxzvQygdyscBwKEjqu8LN/OM5fXVgR9ZRAhX/0 Qwll2J4a/mGN7w0ECmn4RxlSiIRG/CMNYvhcDEf3jxhwA3VjY0jZGoinkelqONBpYGv/tsKWukAn bW3jS0k8c63ZCWRRl7GUA3EWQf54UCAXXMKwLPgfo0VCIGVQwvam0I8yFuQIrPiHKSZmhDSyggaf SyMNHhaDVeBQdbQjoNlcZz+zJbCBiEqbm5a4v7RBJx3wSuBrQrZAKSbPXtmpl+zo4DhaLCE3/2iD GI1WsMmJEWFTyCEaB2I1DCEDjjRIoxjSWMc7QmSH3EJbH7EistwFkiAmqYuDHuWZdOySiS+7j7Z8 lzpHPlB5koRF43h1SYEILDsEEwj2JpewI0iOIKOkmBE05rU4vnAVNbSj2PD4Ffr5cHU9tOXItKVO tDARCxmi5TC9VUwrWPGYkNSZMpdp/0lMPnMW0fwHQNFRwoQlDZtp1CY3UZnGNICzjv97lELs8CVY 1vJ16DxbXW7JOkLKi2U44QnfKrU6DdXnnlS8lweFxrj/9NOZYhxHQAHKF0xUM1b/yOY/zrHNnTL0 m+HklBU8hRAkgWI4Fk0nRvOoUbWljZ0bBQwTc0W7HOnpL/CMJEohqNJx7GsT0HNpM//xTE4KhHID mQXCOimQNl6xlP84pTcdGs5BlsQTCfkjFsyU1LMt9StFdCouPVqSzvQyUiElmVKOWDvF6eyRhuOO JRXnOGiM1XrQfMVZxYiPeGTnCGz9h1tZgQTRuvGndK0jO2mSEL+ZZEd9/d9SeXg2ev/KsqO5cy1O k0NVpewSQg7C5GPxGVlmYjKL39meGOOhhOQyIZRH0F4/QGuPWWgsCSlMA9ha+A8xpDCVQFVtJsZ5 EBsxiqQZDVUQZ0sQaz2xJNJJpxFHBgtb1AUnbtibFbIaIx0NMiXDTalWjYvALDYBgQMTyMD6YbQR HoGMJbQuaF+oOSNk13xam+tDwemMNx1EqL9CL1PVWz/bWsEmQRQIdORprbrUKr7sFNX+pBFEdNAm qwOeIlcjKdYu4MM/Q9rXKzQpRhVykAlKeMY/plDNI4zjHKNkRefcaATRTQy8qQXn2zpmkMCZBFkM HLFs8Fditd32HxJSyv/G0jYAmoT/LwnkiaUiqpWSYDLHkI2gWBs3pDYsYWBNKPLSjuZZUzS5H1BO Yzw651mrgU4gWH4oMgRSFZNg4TG7vJ+Iv4I7tdj1zLryAl/Ygiy2SIctuWOnkiSErI4JdSgjCvCO /dVFlvrZs7P4MxWeuSIkK2GEK6rmwxItkPNdAmJiMFPFENLhmYAiLOYtCY7D/BVd+VYms7WCXjo9 kP76imXvHUpKEuVted0Zz8TlEPW6IGT/XAYfgbbGHEIoEGsgbUTjUENoCaIxifTDOIA5M7UJ0mYr wAF35wTMcDJdEvMuaSghJhmFdukFa+WXILIGVjx8hMAmtIEy6BgLOqDlm384owoB/5c2izj1lSDG rMyIskO0tR3LwuZyIAgv4EAc9KsaFbAfbpCT7JCHD1rcuTKPKflG5IDygD914JBJC8yTYi1CwsYk or657Mw7JjCVJCXU+gcnqgBjpbcEH1houlXKvumCzNwWnPqrmcFMowJdmjSeAVQ/sAH3ghj1SNuB kNl7Mg+erT1+UI+6SfI7DyjZYUZ8x4ZG+gEKOzz9Joh3iI2Sjr/thH3wIekHLNKO9RkVpPGWNz1x 7OAGWGQeM651A+LzVYWLg94nDEbHODh/+43MzgsLw8fYt6P63hv/+AbJdBWwQAeebacKEUe+9KcP I3s+//pVyOH0t3/7eWD/+sXnvhn4Bx8Z7F8h/ONPv9KxAQo6cEIar1e/QgICACH5BAADAAAALEAA BgAGAS0AAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixokWK/uLFo4Yt3r2LIEOKHEmypMmTCf1h 27Smpcs1dJzxU+gPpc2bOHPqNCkuzsufLd1gS/jOi1Gj0nYqXcq0aUl/LIH+7EJ1U02DRY96SSpS HpavWDg5HUu2bESoUqdSpZrpKsGsRrlwDekVrFiQ8rLozSKvZDpptgKT62e2sM1PaV+uXSwL61Eu XKCNrPtVE929fEX2i/YG895Q+BTO66S3EzmB6dLNM8y6oLXELRfL7vKu4LsuXiBHngwWi2W8Vvb2 BTmvs2fMWoYexKcFsx2Be20N3JtO4Dw72Fvv5OcTqLOPAt/J/5rdxZPtLlt0S+7a+/dFeVaCZ76I 7bj9LMoLxvIcC7pe6f5lUd0/6exlkR3xaceQLEBtAp5tbsz24D/vbJEeZOvR1R5d8cU3XEUF3mff aQXZ4RlX0U2n14AhZnFgggqm1J1LdLhlEDqzwfKWheltkSFeGwLX4YcT9fMFZpoMNtA8oSBHGEHN 6YWNNKv9k2KALBpYEYJWxJjQOEChs9B4i8mxI48+8gaWexbBN6RF++n1RX4FzQPHlSpm8RxB2NmR H3WoaUkRl14ihNhLmzDEj4QDVYjmj/9AIyk00tRWkDjRZBrNTANR5ptA4niiiSbXPJmQOZmKI5Cb HiI0j2oKtf/4RZUIMaeXFqZaqdeeCgE6EqGFGtSGYuM0lEkXcsAyDqfhoZkmQZvoxkU0BnHSm6Wr ttePK71hUceEBOFTR4dW1NEPq1YQKdA4xmXxBrUHebKXcqN9EQthqeU7L0F78ZqQryIBG+xA97i0 FrMK3YPwmTxCGq1uzlR7LUGeasJtb/FxkatA/bxBbnx1mEOuutHIh+TG+Oxl3j/kYBaKrlnA8Y+J WXQSoGfTaeFnngNel91A/YTS4RdzDZSOHV9IJzDH0thhS2h10kJLsQyhE89IYC7WBkiONlzQw5BF XJC1YGH7j6fdYkEumwK58nGH4745kDgdHtcfQdHsFRo+R2L/Vt+uLN96M2Z5AghzlnoRBMfbRadD ri1Lz6N2fFjQ+g8tVWRehRsbExRPF0sskShB41CxBBVXC2TNLFaXUUZo1qjxikDQyLayRV1b6PCF WIhNENlfmf1O2hiTOyE+byefLtBffOzZgALVodfKcTq3191RhnZf4TwHmrhA2CSPhamLk+sFjAK5 8fH4AqGjueY6ItRG6KHTMlA8TdDfxJNzKDELFUpQwhzQEUD/Rcp2XHPW7rbwFd8NZBMTa1TaQiaP kpHLFQRxG7lqIQ9PvO1DFozPu2JhMvekTEr/OKGIAESz6mwvQIbzVYsGwqW3sUh5XQJf8uz3D1C8 L3NX6Nw//7BRBfotoQkPNOISPiGQ/gGwgGWA4j+cIZvGXCR3z3rgFq5whd4ZBIJle0u3NDaQEFqB DQRhA7muMRANyu0fHgPZk+gmnyf9LQuEkcZe4ECOJmFmQLbQS1JSs8fUcA9L3nORQDpULHxMjiu2 oNw88HE+9HHJDvOQBuUE4oUqYGEc6HBD5qj2tdBh4xOhExM+QtcGWswPif/onxIigYkCRkINSjjC PzwhG0hNBIsO4yIXHSgQMAZPjL1hI9C4YDyBIK9DaATax4bzzPhA7x9xswLVaqGXOkTvVlDr24oE EsgsxBBw/PpP9wiUBRjZyQoyEwgn4sNCeuoQRv2g3JPoEP+f1WSODuvKHJ0GcoUl/qMf9fuHNVL5 D3QsQQli6h8TCMMEJUwhhbnEBy8X40uJAPNrwrwCMf9hTCwIr1sLc6MVLIUueA1EEyNbV4e4UJAQ wksTeqFWPz4zkOop8h/lPKeeCoInGXaoIFD7BwmtAKDJVSmfMEJHfO4yRCtUISlAFNM/LEcQhC5B OZ94hZhecbqBAHAWsRSgQHA5u38c4QjoINNableRj0IrpCMt6UnBQtOakgteZiRZTP8RQrY5Lj6/ aZ4VhjKOvZCynN8DqjoD5C+YCfWG6CNIOkDRIQAddSCf1SRTB+K+KthPlP/U6kEcugTVDmQOS5jD a5Uwu/7/tRWXaHUrXGu3GLpSxK4PxOsXIxieIL3lrwIJbEGuMdhawC1fqRGtFX7ToerkTS+mgiyv yjmXfhF1sv+oLmo+yzFbKLazi8wssCKpTYL88x+w+CEdkkoQ1rq2iUvg4T9eodb+5Ra3AnkrOni7 lkwkEE3E3IRwC0KHLh5TgmvCCnIJSy6DoGs4MMXh0A7aIcIsNYfk3AtVOTFOyn7XnKC15njRN4/z Pi69IJ4ZjNjr2vfi4wo/7ELn7GsQ2Op3Fv014D8ArFt0WGM2DtkELMzWKGclOKRWJIgwH1zcCNtm wma0MLkGlGENJ+iwObzk7/DUt6R6lyDohTFmQVxDytkz/7zqnXF8alwFgG4VtZrzJY8L4uOB8Fe2 /l2rkAVMj9ksDCE8igM0EIbFJwtzdFKe8l4rI+EOAZZcG0MXl718VDALRMwDKZ8VuPLML6A5PpVN M5ytsGbrdAgLsZgHez2bWfXlkL1zwUfmQEEQbNBBc3auL0P5vIRIzLa2QiaygP8xG2swxBzO2gKz Gg3SRxskpFeYtBUMfGVLJ5dcTKajiv/R5TpAt3OelrEVeAXVcS/1ZSled0FULV4CfZa97APqm8m7 6nvqt7Q8xAfU5oHjYA9klUtw9j8+0YTZkXVrAjlrWv87aLjuUjaPYMgrnLUGhm3R0VyENEFDutf4 RJMg4v+2wqU7xGQzDqiwC0k3l+JZ1Q6tph9aGDeMU/3mVbda31aI3z/mOdp/2Fqr8/isVK3ghoHE twrjIHgVhP5rgOJDaloNHRP/MT/ZQiN0ewtgRJNdcTFZgwpU4REpD8KPaLe1WRYaZrVDfm2SI7PD fmV5eCY8EA/Wm7kmL0gtNBENaeztszUMZ4WVGh9Tn1rejzdcvdO9VF5z8s1Etzx7QRyfKoipH1jI XD/6AUTC9KPgDS0iD+lwxHiMI6HxYCU62qAEWAZ6yGX/hz/WIAUeSWEN9ECIP+gQbXPsaMHBtfZb sH1ScqmKIHJo5lbX1lVm1jvp9eYwI9UM9HVv9mM1X+z/vFE9/qL7fMW3lmQ/OPtm6UojfOTlROaw QAvU2vnXVbhCgzMnGffll3ZKtASpMz8FpASY0ERkl1vLtl+9JwUO+HtMpnvE5ywQ1yjYBnJX0AUF IQvMd1zkcnIUQi59JRBqpHfftmUDYX3l8iQhNILWNxTwh0OiVlmrxnPmN3mhhUOWV00dUkmk9UOZ o1VEBIShwVo81A/5Qz+y1T4PFUD7g4AUp4AW9w/8wHsP6IBb8ArmEHzvQA1rEG1ZFB4XWBCegG3P 9w/3gG3Z5oGdZwUYlEIlGB9v2DYiKA7zYEY6p1JsEA0qNYcZ1h88qGFYQF87V36SN27pFojrRn7y RC7Y/5FZPvQ+lldMP7QeRjgQrxc6TUBf1tAEtZc6CsU6qvMMUIMO6GAq1nCFDwiG0VaBFoh8AuEM 2NYF4vAOVKSGwkMumXNGmaCC8ZGLyuOL0KOIH5NUFuR47NchyfhqXFWIkRdvPwdf5CIz5OVIlIMP /BRj8AU/BdEPsNAFm0NK/WCK9HV10NA542gRm6CKWMiKPBKB7zCGBGEOaohtbGB3jVIFnccGu/g2 bENuymNGroWH5BJl/zAONpdCkyNvLgYHzeiM8XaIrGYdfUIQsIBqhGEL2HCKBwcKoECISIUOINka /vAJ7Nh77niGyweLAtEF9chFspAJ+Bge75MJsqA5H//TjPjgi/EhC0s3ZwWhUh3iW+1meddhBZxA GD4TC/nRD4HxNORkC1RSEKkxkgPTFK9wkr6HklugkispTCMli/UoB/0gk8IkPDW5SzgZH165JL6I QUvHBZrQjNiQTXt4EERnBQ+JEEuFBVf5l/MYB6poIVe4CcGHEPHIkm2jhmT5D2bJRWZzD5kwmTYp EDeZOWxgfAmBD7KgCZ7QlgsxSQkRgzQXc8oImKipe+FgkqrYBZ8AmgRxD5swm7MJm+LQBlzEBr6j MBHRD+8ALkxRSVYwiQkhOR1ilakZLO+wnO9waMmZEwjZIXCAnNKwkMT5nNiZnUrRZkiJDU+VDrAg nFZGkG/aWZ7miRL9IGqcNp57eZ7u+Z4T8U7rWTnwWZ/2SRHrx2l2gJz32Z/+WSegsJDkwglr958G eqA3gg2BgQ3pIEQIehMBAQAh+QQAAwAAACwjAAcAQwEsAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAj SpxIsaLFixgzatzIsaPHjyBDihypkd+4UpXKTJlSxlKpcfxIypxJs6bNmyTfVVrJsydPS/QUvhsz hkwkTJiCerQXr2m8mDijSp1KFSO/nT6z9myWcChRMmDjfWwVp2xZj/GoqVUr05+8t/LuVZ1L9+JQ rXh5QvJ30OtXMmI9tmpDmLBHaoTdKBZpTlYdL5Ahc+ECShxfhvxscbLDKZY4gf3kQa1LeuS4J0+i 5M2716DfooDHFjbcEXFiNyDHyYnMe7JvNtIW3vuCpTgWLVoEykOOXN7A5cizEBSnqXotjvjSacdX OiS9MaijqP9erbWUa6LoybyTPftw4cUd/Xni3du3fU6XD8IxbtyOcuZaOPdfdARFk8WBmnBk4IHR dPeRP46gFp5qYzyj1D/+lGMJXusR9FpRHXY0WHu1zYYbR/e4QV9k9rXIhR35EXQPf8bFMmBzz0Un 3UALZpHgRj026GBHz0g4oSkxEjSOVpYU9M4U6BEVIkefzNaGeyRqlCJ9bMAyjmj/vEWLJi3CaJA8 /NkRTTSfhQmggG5qcWCBB/qoYJ1CDqmRP+AZ+cQsCy2Z1YX/PLkSelNu9EkZjNLGkW2ErbGRP5rw xgY2Cokjh320GBQNf3AKdE911cn1X510Ingng3puVI2fT1T/0pApWQE6kKE8jZGoRos2eqVA/qQ1 jqkNBRtPftSsoayyG9HCmyZJHuSPHfYRK9CnxoWqkDxWoEpSkK1qBAmsux7Ej0+WjONhVolSA9a7 mByEybthFdRrowI5E8dsj6Aj3CuzfSJXsstKKi02m7ChsCfYRHvrs5f5I40noJgjLbWTwVIQtsVp mxC3VnQbUWjcQQRuuBjB6shDpphiDaG3sluQu/TGa9C89AY20Cf0kuGPJVYWZutB4xRc8DgEL3sQ Om4sqzBkbvh70HyQyXHZOGzYFxwn9vlzT9cC0UijgKOSSizIIU9H6nUE9RPLF3VmUQc5CGHzRhZf NHgyQfjY/2LH39j0c1A/0mzGiS0lOzSPLbbMk1A/6KDj+ELzJC7Q5IXCyopGuPKU6DM921wQzu/q LBDP9EZitNHOLL16wZsYbVDRBXdBn7pO8tbhOC5ycc+mk7EhECyTYdGm2KAql7xyIafNY50/gnZ3 3HWyTVAs1Huyt0DYyBk3HJgLlI73cWPKUD9wNG+FHYIXZAsWzbNPECx00BE4HVVUAQr3V1RxBaZF 8lM4OCczgjxjCjWTV89M9w/U0et1BYOZP+IAQQgW5B6164IG6ZMoWETGE8DKmotAcR+B8IMLxdnf P5CXLeW1kHnNS5WdBqIJ6lEvHQQhhw3xhieCpGOHWdBC+//+gQ/yUQ93j0uf+tZXEFgs0QpeGCId rFAFWrghf/mjxTiwmD90BNBI5ZpI51byuSlQgQpgadLNFji6noHlEdQYhyxW94mZ0ZEa+npdQWK3 Bg12wRPQkIXt/JgJgviDDZHpEPF61yKNCcQNxfHPClmIBQGh6YVhUl+BQjbDf8wDiNUjyPRAmad+ wA2InBhIKHYYsi8sxBZPDBkOBYKOWFpBhf/AXxWwwEX/9Y+Ln2AFuQjokzKa8YxqbCO9EkW6d71C SasbzT/mYDQk8qMNq/OQHzWIxBRt02ICMUdk5GBC+wDHHHRwUZ5AYRzlyMMV/LnGW9p3yY49R5M8 al70alH/p1gIrh+egN5AdFin4OCjDnHLEzbqpAUcdq9OkzulFsbRj3Qo0QrhMwj8rACHcYxjo7i0 Q/NswbTmTU6XVXDDOEDBRTdg44r+G5efNjLGKRjzmMkkiCV6xsyexSFJcyyYNQaCwYK1wknZHIgg /eiKgoxjm478h7Mm06l/SMM+HTpki0LEsQIt7zlfRZsVNhmyfSI0C0P8oaoEws+1ejKhA4FDnWZp 1X4KpE6hGEg6QjbRhMyjebN0ohWwAJrmBecf/fBCyByJ0pL98gqCmwcWZWokh4mxgAM54EqQeZCd LlOZ7+JKQehhNFkMhHbLkhpB6FC71W5TtQPZpvAEkgnf/3QIeFyI6j8W6ZvRcGyIHKtkQeopXBg6 71r6NIjl1NrJGh4Iif84axaE1I86waEgp3TlP5qnBfP9g64JgeVgBzIPO9jisNho3hClEbIT6ZIO A9ElLrF4iWFmpKY3NWNOB2KJM76rp/SC7UDIULA6CiRpzDJIK/rox4H4Y5tdmNo2B2KfcvoGnAK5 aoV51E4OY9KF9jTuWPNZ1oSY420CFcgp0UqQtk5XfHYlCCey4LyLWuELscgoQgQryYOIt8f/qKXz dFnVXGZxIFj8ooTCKBH8FkSzP+nsGaecKM/+9yAONMpAFrysTRwEGhC+FYTfQeYyvyMT21zP1yYD wn+IY//DA9HwZFI5EFh0+FpfBbEV4CRWsloheqChTiyjF7eN9bCuB7KF+wD7D/Eu8QveRYhImYgQ ToQMl4gNWRUEQuT45s+7SYbVAB0CMydhViBQXsl+BdLfKVOhymh8F0I80bOBeGJZf/xymAXyDgj7 GsJbWM87tsCFLagQGr7xMkFo4Rss6JYOxTkRnj8cpuKEjM/4RG6JB2KOL9jyzwPJ9rUO7WjwNprR /7Cx+jBtkEkDuSCTVjRBqFgFx3Wa011Ecv7KobmHqEENsyh1oU79j1RPYdX/aDWVC6LwM87a1VSw 9TbbXBAwT5jXv/71FjYu7I1vARoC2USyC8I1FGIhT/z/ME5TPRxisDYP2zEkMbhFPOhwx1zm8nY0 dM8tS9C8L5aRhnfI3k2QSev2H1jEdxU9XQXVYtEfsCoDqcUjHoATyskGRJeUXQ1rV0vT1hCXuB8p ThCLNxjjGfejxzduMXN4HOT/2ASxuQB3CpscCyG6hnHaNO2WK+/l97z5P6KRXIFoQn1vqMU49rrt 7Qp+8CMVyDgiTxBHW64f2Jh08+h8EEtT2sdDJ4hk86f0IuvS6aRPA6wEbhBTUJ3qpvAQ1T33ZK0b BOKvZjjEy+UJV1N8qRr8VcV3XSjiL2TYG4e73ImtW3PcHQujgSQWouhVaosV5seF/Lbxob5r6LXw /3hD//MsFwvKM94KeS3649uH+Y1eFyHiJexA3GAHWPiLvVAkCDby594jKx31m9YMsAIJmJEarxcF 5SB7r2dTtdcTCId7XTdlOycQZeB7A2F2GnQQrUB8D7ZNluUkbxdyHqdsw0MjLGda1ed3mQR4IuZn P4I2b+BD4Hd4IRNp4hcy8uZ4N9Y28eNJdgA/keZ58ldR2nFa4ycQ3Bcy/iJkVqBa8lV6TAeAGAIr TzANCuEPamCAVDcGTnKAUZAoNWUQ/gCBuudqKEgQ/ABxdYcOECdg/9AGxsdgGoRhAiEOWyAHmwAL bYJ8xjY8awcV70AjymYOxkF9KVhct6I+2Ddi2jZzMP9IEK7QPDHYiNFzflaQgxd1WP9QfiFjUM0D B0OkWJR2fgPRD5snEKCgXmETMl7AHdKARVJzb0bWdPq2af9gClS4OdKCCRLyes/QhQcIhlkxO8e0 cDqFe18HDRBnTRBHdv9gDb5GEK+gQRtXSASxfBtXVfzgcfD1D9ewdnQgDs6CBVdwBcUBX+LgBXvn KXlWKIoYeNlHeNsmVkJyDUtEXurjCvjAO+qTg+nVPLGQDqkYMljQPhf1BYwjipcoPoLneVDkBqco ELSgab3UjbNoevkmEPmzBMACBVRYBtOQDwORD8/QJ70YBWOQJO/ghcLoE9CFhcV4RhE4ZY+QH/SA ezH/8ggQN1QCQVrReCtrtwWwcBnQEJSjsXZ8sY0eV47myJTmiAXQpnIHEVza8g7qEyJ9JnM/Yorf Jng0+G05mG5g+X22hAUlQ4oDkYRPhDn9AFNchAWYI4unh2RLwJE9mQRJQIV6aSTikYDA+HqJ4g+z txLqwWuPwBNcV4YQFwfj8A7QUIGu9kxKgnuPAA3T+GsF4QlBuQWbIAdBqVvYCE7L55RX4AVOSSPO yHKIyGtXCY+MqH0z9w+R+ERcUAcmRZbqwwW1QHmXs1FLxHnDY0vehZYD8Y/qE3Rt+ZbQJZcZmUv1 QxDhgJd7OZ1Do4CAaRBq4IV5YYz8BXGQiXtT9nX//xAH4OlHcaB2W3BBa7CZQbkGMVKUG6ds97AF pOkG10CaT3mG7GgcYNiarCl48hib+MAFS8QF8xCgmvgPxmkFXJAOARqWPrhENmIQ0uCbUARei8M4 BoEOnKCOnOCG3AMKnCANlnMR4QAF0jmdfhJ7fcGSBvEMXriAlrAhm5V7x+hq5gCeU1Z3BEFauKdB gBSUBmGH7Llxa2At/zCfHgcV4uCUXnAPbUmansBkg8cf/dk8IWKVgkcd1aGf8/CVmuA4B7omQTcO nvAGnuA42bEdB5GhiKMQ88CmKNOTZYCXeamiY2CFCLGSwSiG2RmjUeAIPyMexzSTETcOOiqZB2EO a//galIgBZ7gD/DpcQdxD3HAnnGApJw2ggPBD7KwCbLAftfgDM5gDtLED6TqDChnZkMEGppaEdlR onM6F+FQp3eql6YgntZJdeVCD396gJjAF5bQpzc6ZeGkBq5GBjyZEPzwCo8qBXHAk44JDdBgDkx2 D9CwCdpKC3RYEERajnz3EP0gB1I5q+YqE+/QDJBQBkYCCaYQDh84EPQACfRKr5igqxjyDL+KCX75 D/RgZu8QrwVhDtRqDgLbo6zHEW7glOF6Pq7wlHh3rhI7sRQLEuZAmq3TEPwgB06pnxX7sSAbsg4B C/UpDq1aEPzwsE4pBycrsi77si5LB/h5BZvgDNdVQGbi4AyusLCk6QX4CrNAG7TmqrIzW7RMKQc/ K7RKu7QOQg1dYLRFG6pMO7VUqyf94AxPC7Xl6ApUWrVe+7U48Q6fyrNH6wrikLRgm7Zqu7Zs2xEB AQAh+QQAAwAAACwZAAkAawEpAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzarzY7xwy YiCRneu3saTJkyhTqlzJsmVLe6fMxJhJk6YZYiQTwlvEs2dKe+6CBrXnsqjRo0iTKlVoT1TNp09x EEt4DmrKYzSMaDVyDGWzJGCTQKLnkt6zUmqoqKVSxlIzdBHRyfr06RW1eEvz6lV6rgbUvzUX5SxY 9elVGlm1dj35NWySdyv9PUu7tnLlMtD8MfT3aY3nz2vuCez8mRpBam1StzE9MB5dus5U8pNGW5q8 vbgdMoMBuPfMIIMHFq55ODFXr44fq3xGZopzy9DVlrG2kDToNXEGWl/DWiA10N3/xf9bw6b8J5Xy vKjnIi23+4TcYMj33duMweE0iydebLJxWMgn0eNIFFE4N0V0CMqi2UH8XPfZeaOBd5qErXlmHnrr sffehgTBU4N8vNEkCjcdEuMXVFMRhN9M+imGnGMAlkTPGAQS6BwZpTwzzjvvWANNK2VAFwlC75Bh JBlrfEKNM+NoR6F3T4r3GRsQoiQPF1hqyCGHe4AYohnwIGSPTFEFt2IM+mXFX0n+gRWjRjPWSKAl 5Sj0jiWWyXKQNUeSMcdBzrz2SZMDfVcaQeM9iF6WWm7p3jleymdGcAb1Q2ZNzKhoFUpYIabmi/+V 5M+ANZJRZ0PWWAZXQdCoZaQnERn/6ll4Rl2ZZXuOuidJpDCEudCZkmhqGGEgHWPsNgdtY+yyRBHU qaeLbTPJVpMgyxA9qjAShhqVnNqmckSyAsm4rISzYEKYyOkIPwO988wsz7B70DiV/clqZbBCJCt3 E/HD4zvnbjaQrVjimituvIrikCQx4LAIMdw0K9CZBhETg6c0LHLQIhjT4E5BzyJ2DD2MbGVyGGQh 1I8qSLTcMliM5PPtm+2qkVwST0TRTMAEvaPugvxYIicZkL1SmSX/pLoWoe8gOIcnnqT8jzNQQ00o lIcOdE/VnsRWED+yuKHe2HTQwjNB0siBJRvS+ENwowT5cw0nWNRtxzWUEiSOJ3XU/12HJ+JM1M81 mhRey20J9SNOLJrEIk3eB+EjjS224EPQOJRjIxyvJDZkj68HUVyQxRhrbBDHGH/sbMeTOGHy605I TVA/arhsO1hQVJKc6gSFc3NYBKpx9j9qyJkyPWTISSAZ/lCmFjQCPbJWKwI1jaBaMXrSxfZdQD8Q NKB5Xz33XeSrtdjqdTG2em6IVpA/mjCKpSbmMGrwwG5wUff+WMBhjkH3sAP/+FcH9zlEHF+wggIX GAuEIHCBCvzC/QQCwX9gA4JY0Fw/7ABBL8zjH6vgFeQkIjqCWOxiiDFdQVDnKd4JJGSIeZ0MnZA3 ltnOZb8Diwv/4bscgoUJURBeQf98VqNnCKR5yqvRLKJQmf/9wxyV0Yz1rpc98onvH9CwYs/IZ75/ 8MMN5Nve+rwgB4N4Qn5ZYoP9CnIPLA2Qf04UyAbfyL83jNAg4oCgHmthkFroEYKuKAgEx/FHLMwD Dn+Ewz8oEakgaKSEAzkhClVIEBYiZocwjOEZjqGKMMiwFAWhxw1bxghV2Ox3LswHFJJThnFN4YdA nEVB0kWgMSxoiUlUnhTUIq9/kGEtkJkigqrIvStmsZhb5F4XZRFGMIpxbG8aBxqnCTd/eEF/dKyb F3oZjWzuzwrRaEg/uPBHCCJOIIQs5wKv9g8MlhML6sQGGiK1h0duyoQ0SeHGOob/yY4hZhkD6Ucp ZBicUtzwCVLbBioJUorkNCOgp2QCEHvpDzkZ0YvKi0Q4wpE8OUlBCgTBk1qo4w8eyaIyj+DROHqp PWR+T4vt4uJA/EG+TMjLH5lQn3qumAlG2dSLPV3jQGiBTSzYQTT8AAX/AimQvtXtDYi7EjytwIWG +HGB1/jHlRbIVIG8YYFcwMY8xlEHsA5Gj5xIRzoQCcG0jmOqVoDFPL1Uz4xAUiCSvBglB2JJj4HM n6owiCdNNg2CPMEItsPkzXjXj+RcoiD9eGUSJFpYgYRDTvIyhZxM0a4kIm0gs1iLMfF1EE+spXsE Oeb2rvgOmQpka3LY3ptaq1Px//GDUWw4122F+g9r7s8NwaHb/uTFv3AOJI9U1YQBE/JVBRr3H8il 6kDSqcAPypGcCtQcBRdoh+lCsLsCkQZ35wqiumLkrv/Ia8b2mbq/dkxiA5nG60ApEHpspWVqqNRi B1KO5MhOIKqAJSQGotngHVFOtiQIqZSYWtE2eC2fLYhpHfxSl45PmQdZ7j9ouwUuiE8cjNLuQGDB W3PwL3AEuQf/svoPL+zPC+LIST/OyRB8QNByctSEK6Ixjpy4YoFd/Ec0FqiJgUBQxP0Y5EDSMV56 2nNY+AwMe1voXk+d4SD2NRkjBrINkyFhTQNhxO4GEmDHHOQdYZHoQIpHIFn+o/8ccnLzQCKhPOp8 76NSGC2ES1sZY8L0wtsL8tfG4YotGNrQ4oMGo2h2DUY9t5v7y5sb9pcvT7zRE9foZUPMAVaGlFWB KB7IPDq9XQWmgyA3XnKTveRIu94zkk/Zq0D62k+MTQIhsBvIMV63QwCPWSCQSM6/hj0NxzAhZXI6 FS4JRDM6y+lNmMCzntUSYYJM+Hmp/fOGXRu3cbRiDYcO9xYS3WEs8ewdjh6IcLHghoOsu8hPpKMC 2YC3hgxZgfBWCARPLcgFGnmBwangQNDB3RBG6o6EAd19Xo3XWE/5klUWGa5fp2teH+QYv/5HsH34 OyZAxh8SJVDKICEngzi7RgX/UQOe3wSNXVKbzxQWiGpRG1MMpxbc4ha3+DZx6KoOMd0CWTcnSru/ OgzEFQPUIxs0fJB7WyHfCdm3QVLdTn+j2uoCIbgC7bCbSJ3DITIJwik6JyzijM7hp+NnxGkA5oHI sOIm6/U/joEEx/DOERzPYTAlCsSBTKFGZTCI8hxBEHrgGaSpPXy1B3JtKvjZwtu2uUBgkfPK7zzc BkG3G58rdHfvD+rmcGo5uYBwIROZIVLvtwL/vfqrtz7r3LVHwjz3lBqkaGIMTy/aV6j21WGMvgZ5 +wstbhC6230geA8LFMbF/OY3nyzv4DsTBiKnARdeeZggyCvwnP3E43nxAhEp/7YrvNotHtp878j5 JqBhDnOEm9yH1vSGi8r5Fx9EE58HoCzkUE4WJ8TpbMAQ2GUF/BZQAld1r1dqVkAQWmcF3YUDkVID pfcPTvEUp1B2+XF2UpZ27eV7nrJlB/E6IDh3r1NZBWFQdadDyOcYafAQ0cd31Fcj+UUQy0YgF/UP 9BAFK8cqincQlnB4xvR+PRNu5kN5hwYL55J+hwZ/hsZo/OM1QsY/krY/XVUp5vBjp6cQ8nCAAiEO 0XAN6WBdmrBAz4VOC2R0Cqh6Czhw3PUPXUdXv/IXCodeeRUDYHAQ/lRrnuIEWPY6tyYQ7vA6gSVY OJQEvPMtWPZfGyZ9AwFENf9yLv7wd892RHNAIFIwJDz4fT4IhKklhO1ChAORCeEWMEpoaLAwEO53 aLRQEEqFBVeABVBoYvsTatVzYloVDZ4QP/KHhU+3EEm2QHH0D58GTgIBgAXBi13FhQi4hrC3dQIB gZEiCiPkIVBhXrgHZVyWe/aQh2tHA6dCEKrwOvzRD68TBgbhDrdjiPyVHOEAWY4BCSYofQACCSGn M0d0cjXCLv7wCqUif1h0eJhYED8obd73UawVbpswEOIWMEZoaAkpEPwQbl5wLip2BRZ5BVDYD/zj BcEhBy9GEio2VXpCEPynQOYzhs5FEMOYb0y2QNY1ags0khYEQda1jGrIgG3/+A/xwStBwAzBYQ91 SBNfh4EsQhhQgRfgyI0e6ClgEBz94DomIztnII4pd0PqOBCrpHzB8S3fOAV8147/MAvSFwWmMAtl kEv+wmYEApaZ+FEBSRCRwIl3RpCfeGgP+Q88d4RHBA3idpf/QAfhRgfs8g50cJEWCYX/gHT7Qwf/ 8w74tz8yyQaAxCPm4AkQ5H8oSYzHBUGacA3RMIABOBCZ+XTRwIu9yHrMmIZsqEB0MBCkwCsgUgR7 sAeXAhUXaJTYKBDwABWTomv+5FdLaWXNQg9nYBxGYI4E0WXiSBL5wAijdJUC8S1QEA708A7fEngD QY8S1X0vOJa5lEtsWRDP/wCQBxGXdClzclk9CDkQryBua5CXfTmEW2CY9HmRiMkPLuZNWMAGg8Fp 6mRWokmGBVGS6sRO8zCAf8QFOKaaqImTrEkQjASbIFIfoZN7/4ADUIEDkzAJYPCbwOmbHgoGxRlD W/GNAzFYMnRfN+RC/ZCVeQcuAlFsfJcT2il9TDAFZ/mdUUArBDGeePaWc5ae/3ieG7aeEFl5hrYG gGloXVAQn1CfFikLhomY/3AP+UlHXKBhsvCfCvQmmVmG/3Cg6lSFAiGmCVqTDJqmDdiaBGFwEhoi T7EHkINeFOgbNIADZtB7IOoppeAEHqoVI0gQgZiiWvEENuQyO0QPLupDD/9VeJMlUY3KD15po+FQ YEmkBorYo+RpckLackRailvgl3yZc13wDtQQbsvlD4VJn+LwDlMKQB75RnLAdP/QaOW0dAXxpQaB D6NJVf5XEPhgmlbgCnljB8YKXgNBOZRDEPhAC84qYgPBDdAIm7V3ewuXm3KEoYCBA/FAa2t3DPHg p795BiOknDKEULuGWC3TazPCcSZIEDYjUVOQE/SgBnw3Be3YPI5IIJhgogjho25Znp0qpO8gBZtw sKtIEOaAcw7JLvxwsAfLo87QBRZJB5DBD86Qsc5AM8flCWyABXLgCcFYKeLgCoWjCbIwsg+BD57J Yw2BDjA7gRrBDEIgoTP/UQOnAF/XanYGAQ9B8BdmgBfeGpxdEQ8jijGqgHDEKYL58A/bwAhQC7WZ +g/TcErKVwpNexA9tJ2FNw3lEBz/ooj0EAlkGwnd4S9hexTV+Q7+6IsyezBb0g/cQAynMJt7QAwi 4TkgsbfWClnLcCnV0hrnIBTuQClAQbgSUw6lwAiTsAw6mxD0YCzT8LgO0Q9CMbUEUQZpBnwRQQ9U gFlwG7qiO7qkexJo5hic6xDvIIkE0qil+7qwG7uye4Ks5K8JwQ+mYKMzOLu827u+uyW6w0qywLEQ GQ6YYKNMIES/u7zM27xH0VDJwXdq4HzIK73D47zYm73aSxHTIFmwVL3gPSsLb7u95Fu+5StQ3gu+ yBsJxGu+7vu+7tsP4WAJ31u9ZSALmAu/+ru/2vsO5dAMAGwJsgDAX8u/BiwRAQEAIfkEAAMAAAAs GQAKAIQBKAAACP8A/wkcSLCgwYMIEypcyLChw4cQI0qcSLGixYsYM2rcyNEeuH0cQ4ocSbKkyZMo U6qMaK9YHhQwY75ABE6hPVQ4cdbsmKpnz50c4YEbOnTlOWbERC1aqorYuX4S4x07purYsngrs2rd yrWgPT8xw4olArQgOLGoQoJTwZZtKpFFVshdAQMlN1E4YujdyzeGpGoO452hQbgwjXICjxE2wrjg McaMGTlmfOSIZJSzImmOFK6r58/KUogdHTatwbOl1bZ1C3cuXZPcgvSd3RcMt4X9cBg2DPWfYhqQ J0O+PPAxZeImI0VZHuXZ5+daEZGeHtPPabSqV78NGdc1SXt7aIv/7yuq98FluwufKV64MUHjkYUb sZxSOXPn0POfVEZ9yBDqxZiFHUdradeadyLBMwNtQSxCzIOnLCLbbGaYV9Aku51xzCTLsLeYEfIZ gZxvkIlYHxPMNaPfiiPBc4JYLKACD0HgvAQjSAOhFpNpGxXY1nYcdTdXggvyFQQy9iBkDzET7mUG QosYtp5B2zBipZUhjljllaqcyASKKrIopkZDnPAiTDzMeBB/AwqkI0w8auQja9y5tkJICvJVAzMO EdMXMQdFWViXEcFn4nORfPllmGM2ShE4Zp6ZAo4ISRfWCzS2KedqKmzXDzM+qckQPD7dJpCQctnE zSqrGHNOQ0Lw/2VGkgLZw41TCXHTF60ECUrYMRIZOiJE7xRbrIUK8VMsPwMlqiijCPlTLD0QKVus Pxy9g21EzHqWR6QwKbPQPizExAIRvL6JQpz/oMJpWQIRwalZnL6VCqcrAAGvWTbYKQOfqN55EDho wGDwwTBQwqtBqxislxi9wSOJrEkSsxRT/1TDlygDqbKUboWBcTFWAm15ZZYFmcwIoSmrkcTLMCcx xjQKvaOGokyo8c4/zi4a7TNlSCG00JjsnFA4nww9dBy0dDvRPbCsscXUW3xizkL80OLGFlx0DYo4 CL0TzdjR7NxPNF5ggYUb0Zj3jidqY1EH2AilEOkJKTSECiLKiP+ao6btvmuQvKvRu9ooQHCqwlx8 HsSMna5REvBBpCBsOQwzNO7VwTHgEHENFP7TpF8CicJXb76mR5g7HhaG8nslDlvKETHXnoQayAoU Ds44hwMJztAOFA4VzCktdCTbEuRPJMY3T3dEtFAt/dSwJHTN9FxzsfY9BjkTNxbR3OPG92rLAZUr 5KvtyUEu3p3HReqy6+5q+xLeluGKKz7XvtpA7j+CBKHE5QaouYEI8GCv+oc9QEcbP/EFUArkyzYE kjrVsS4xu3ldcWJXEFVUhna2g1klDBKOl/FOUVMAHgmZUzzjzSF5AmFe85p3NYjAAnvTq55Bbji9 K/hQbV7gHkH/vBc3V6QtfViQBfrSZwUrRMMg2rjbCdglkfgVZH5tqd+8aJQ/FdigCDZoy1xsUJB+ yAByQCjCGf1XEGZc7gZouIHlZrCwfszgYI0YiBjGM5sE/mMRe+HYH1VnmAv6JoOwG44G/5GPD1bm di6znYXyMQWYKaoMJ/QZQcqhKBZSoXmRIMg7ZjjDOEDEHDjEntEGIo4e+vCVPvSChYiIxFqSr4lW 4IJBUCFFbcAPcKhAAf0Gt8Uc5c8YA9FGC9jCOII8zjUyAAol2EgQGSBMBqb6hzEsRwmCIANhamJG XyRBjFPkZTbmcWAMFlGyB4HBMIuYyjF49RvXJTI+9zyUQGb3/0FHmKcZtVvlP1RRu1JApR+yOGHw MKkoKnTmH/x4hfEe+g+JDm0OTqPGRB8SB+l9gln+oIP0NqG8LlDtCnQwmji8AEuSDsQZrwQi3cSR Pi7Q7Rq4bKJA2yXFfUXEigQJ5jALYj+24O9HbWSmXPhAkIDBiw+Qc6blsimQbSLMPI04mBAGck69 IGMguupLEAgSVr0UJHXAMkg9CbNIEilyIKVgRGWegKwnxIyi/yhDzCBREEvwDlq7wxm1CIIJpZWh WUqjRkEsuoZNQMMh75BeG5Lnj+k57XqvdAMM7wHLKzgNprAUaCbIV0OByCGnpRUIL+/mU4gAdSBC zSIxC8fF1f+0IHdhnEsLCGInIBgEHlEdCB8QtlWD3PFgmkPYV/9R1hjsoSBd1YskCHIOvpzVMGl1 DCI3+Fbu4tMggyVIJF/GqHzUDjEEocdfCYszUxjEH8YzmgyF5tDk8cNpD4GG9B5LEFp8whnO0NZA 6ADL1ApEFrB0xkthKYeC0BILbCiILHKq4KD29JepCSpMZEvUYrqJU0Q4yCiUugJaAdc1QKqmnaqJ MFIcpGAHc/E/zgFOgVCCL1T9R3geSF3r9gq7B1krDdoqrIXkYxulsGvMGPWO2h0khc8iCO/QWxBM NKEJQquwRps3h1mYA4YP2YT0dhqtzh7kHS1d8CvXN8SYsvn/pVaogpwrDFspUvGnwNwwW7RIW2Ma yCD3WpxcdgIOO/l0cgOhy8EoQRRWsUqOB0ODQNx4MK7CYC8G2fFe/PgPZOyFnT8uTHbfs93EcDCf w1LgNCrxBEeCkLzCi5kaDvK7KAuEH7zL3T+awYQrNwETt/4kKaXwCbw2RMxUI/OZ03wQMwsEtD6k 87MT7GA5z9ksUrQOQ5ShDEplKsOwjcmeZ3u/2iLVIMwQ4woIbeiDIPof/ZDLAOcNA0n/o2EGs3c/ HBYDexNkdDGwkOn0IsiBAFLUQS61W79r6u7WqhKQcfUjYS0QgMLMEbRWoUDewTuE8LrXTQilQMxB BSwPuw0G/1aIFMbcEDS/0qUGcfY/oH0Fac+c2kO0dhVsvg8p8qAhL4BJHoqxsNeqVtwq4HO5/Xxu /A3aTe02yLsLrWh6W664+K63QGjssG4SpB9i/XpXAdOrGBQGgto1jHYdvnB9/oMeTyjRfCRO8V3H DOMGcYTG/8FxnHkcZyK/tZV9fWUaOsTXPlS2QVzuQ5gXROY0tzlor51za9v8HzyQot8GNpp05VnP SjequelUkEAzk92uOfSKEy1vGNygCGiIvexnH3sbR3rrnFtFG/sCaoF4Wi+eO6teCIN2Uqvd+Axv O3LUIHcjqKEU28iHIxzJqBLCbAwH0butIZrrg3z8S694L/81PlFywvu6DQ7ZBOEVXxDGX8HxA+kH 5HG+YMtX2/5XlOIQFsIDsfzg2ztyRWGRdAbBAh72D3OiAiEGaKtRYlCHYgdxA6snEHNhMCm2EFln b1xnMF43EJqmF2iXG3vBMgY3fDRQfK3DVsjndso3EO4gd6WwMNP3QUzmZAbBUJokELyjbJiwdwdB D+NXfr4WXgqhfr5mYNYSc7C0bK+UCWoWbfdHeS+lc5e3D3ZzN9p2EGAhFuLyN+B2dOLmSwWhOEel ArtlEHpgW7zlGkzlFcElEEJQgW1IEPawCuDwFASRgbh3MDjQY32RTYAEfAtDQXtxggl3fK3DgkXW cIwxawX/0Wo0GH/nVRD8kAQ+WGtfUgoG0Q87CG/vEA7NIAvAVkZC2ATsN0SEJwsFYQ6w1AoDBkvP MxCuQH+RF4U7Z4uXx1NSlAeDaA82cikC8oXtAjjKQIajxxbIRIecUgQEAQR2Moip8Ib/QAoVCAOD eEAHQytWhTkCsW/KJRDwwEB8MSP9MDF7kWOEuBcoiEGIyI6EMSKL2HaO6IKuBi1jEDMjRBClYEI5 +A/TwDtE+A8JdUm31okFMQfrJzwABmD49Q6E1wUWsgmwpIrT9kptYCGcBUufRX/PRoW4iBBlIkUn wAM58YtiIYZeGIAEoQ1i8QLmAQ8GeIAJaIai0g+JsxoF/2QMvWUezzSB/3Bi8iYEL2k5/raBMNAb OGA5YoAG4sEMsbExUMJjaqVwawWPp9Z2RjBBAuEOcUd9BGFxMKOJAjENMdOP/QBlXzIFRtMP3/cl FNUzTEAFpdUPzmB+5hEJCUkQbUB4GCUQ1NBZTsMPXQBLKSUQ4jCYr+SKT1hzH1l5UlgQ+5B5UkQd MYEI1yGM8CAWKvADygAOoxCTMtlFf6AMqRBGtmUh/dACdmIDo5AK00RNwlWNMkAJq0AJ1oQwfuSN BpOM34QwfDQbBWcQgQiCh2hPKWiV3fWCcqcGjMB8EVcZJNgPSnZ9jnCPtcMEwfOPvFMGkYCWXxJ4 fHdCVP8QCQhpfhQZQ3k5EOZgfuzpQ29WkZ0Vn2swSxw5cx7pmLeIEJE5mZSZhQAIJwYRdAO4Gizw AqG5GqbZRSpQQFX1P3MhgQBUK2tUdQMkYwMBYzBQXP+QlL4ZA2JQJOKxjmWnjsWpgse5SM7ZfI04 d/RBEOEwcbUzBuOVBMHzD6WQSbyDOwXRlorCnnNgIXjpa2QmC+xpfhBpEK0Qn53VBUKkZo9pn/g3 hVGKEKhwhWYyHSwQIJwnjP/AkgPaFspQVCpQhqnwBwr6BwjxBw7KDO82EPCwRvTWgQOxjTCQQAri m3RECuKxCIMonFKZdsbpjjSAnAwHdypqBAZFGZWBLPz/9GpJEAX04AhL5n04+p26Fli8w5fIEqRX pmxEWqRNMAcB+VKIGZ9yMKrOcJ9S+qSpOqX6iQovcKUtiQreFowqWRBsgnQs4EtiSqb/YHp/hhDR 6C++1Kbx95qXIwO6t4nHBQPBB2+UcFyUcFA3phc1sAdI0hDDGQMiKmSAOqhtRQ+MIHdhQDP/wJxX QmUDUQ5jMHGVkA8D5Qjy6gjGNhD8UAremTPqahD8IAtUkKmWUK8CuRmRMKoCQQ+tUIpzILBfRw1x AEueEIuitJAB1n4Uu1PvcLEP4RE5gQra0KcGcRMd21r28AflggI/gAq9oQw50RNlRBRDQSslG0ZE MAog6OsVowBGRZAKEQOzraVAzCA5RVAElMAMumZ7i2YR8NBVz5of9DANU2FID/GJ4QCvE0EPxnK0 B2EtxZIt+OUoYBu2GWFHCCOnELG0fMGgYru2bNu2busZ3ECUN5sQyBBdvfe2eJu3eru3GFE53LR5 CMENH9g5Wsu3hnu4iKu32EhcpMAM58Ar8HAOyCAJ4rgXOAC4iZu5mru5jkJpVveb6zS3nDu6pFu6 K2EPWfW54lEDImq6rvu6sIsn0UpvsxEExFC4sZu7uru7DnEOq4AGHMo5nYMGq4C5vHu8yJu8ChG5 xqu8zlsSAQEAIfkEAAMAAAAsHgALAIgBJwAACP8A/wkcSLCgwYMIEypcyLChw4cQI0qcSLGixYsY M2rcyHHgt16KQvZi17GkyZMDwTFLxZKlNngT4bVcxc0eyps4c+rcmfBbHgtAgwJN0acewm9CLXAE d6Jp046oUEiVirOfMT0qsq7YynWFjT/gHMIrsgKG2bNh/606a7bg2rMxChKLQZfuzmNG8hphxLOv 34z1fCQdDDTZQaRClzp9yjHqVBQo7f1pkbWyiq6Yi6RN2E/GVrZtBb496xa03Lp2deLVy/ev69cO 2V0gTLuPQcRBFS+G+hiySWOULVfGTHyUQmNd2aIZODo0c9MEV6GOq1rvXtjYsxdkV6ECbdqKCuL/ BqrbKe/HJv8IrwykiHv3LYivKNIPIVmuMITwKWLsOdvS/0U33V3Wtabdga7t40J3QvWRzDffJNMH YSR5lFR5jG3k2FQd9QPEen9og5BM8XXFh31dFXEQM2i02CKApBHE4h407nEXDawhqKNffXTHIA9G bcdDUrZZmNhGTO3WWG8dqWfZHzYt1M8omKVy0H1bWRlRczAceAyOeRm445go1eNjdz7sg1A9KSQV 5D/jKYXkYicMtA842oCjZkPwgOPnQBtSxRmefta3UCqWtSCiQP0QmhAzmEVJEJYraAkRlxWdc041 mp7zUDznlBPPQF+CKeZB/bjjTjnuSMoQPe+8/1NOrBzFOis/EPnzjjmx+kMRrLyi+o4479zDkCJn VvDmQckklY2RuRHEjg/UUmvQtD4Moa14dP6zjx905rGsQdq88BgLqPwTqG8GgaOHVJb9sOhB9gSn Qgsw/dNPKvYCAZMx7xXxxz+QckXJQKO45xlXN7wno4svRgfdQCyiUeNB50gyXV2TeJrQMmDQIDIN YJTzT6k4nkrQNmpYl5ca2yhETylHHJHEzThX8o5F/FjCxM9Al9EMQ+HM0cTRSM8RDkL0bOK00wKZ 08YVVF/RhjkD8fNK1VRfrVAOZxaZ0D4p5KHIN+JdSFCct3W7Np3spEBnUylsVpAfvU31AyJMGv/E 91TrEWFoQURYlpaH6wHRD6Un/sNHV4ZSSlyX/sVYuXOiDVgQMxtvTAyqZ4wsOg2loEyDyvoy4rLL arg60DY1x47z7KVQFA7QuAOtxuAF0WM00sAfHYmvBb0T/D+vHM011eL8Y04Xy1fd/EH7JPssRWyv rfbbSnpEp9xzO5UvQevm3TdBf+S93g+8/2OPZcYJ9OF6KqRSpUD2dMWMQJJjRrloEwNggJijuYFw o3Od44ZBJjG60TlBdCqzRxhWt7on0KMg5YidBmeHs6FFpBm5CyET1HAQelAheChsQhtwRRDjAS95 wFueOKK3PBaKJ1njgkj2oEUebnVPIN8I3wn/ePCCufGgIPYwHw9YYD52CUQZeXvBD9YTv4E46V6G QhT9hsOVzQCBK/HrH2YkNkABWi5zqClIEKYThEWscTqTKAg3GkiDRdDxdAY5w+rC0DKXhYF3T9Bg zRzhCJtxMB8QoUcIy6CGEHpwIP0oAwrLIMngzaF4KWzCHH7XBBrSYWrLa8VhkmWRHQJxe977IZyM WCFwFHEx8/oH3h6Thz1pg4nn8xYupfKDw2HFMpLqh2W09D7LACEVo7AX5AZiv62oiGAsuUGKWkLG M6olgGopIMFQgwOPue+NdAFDQcwwOlEYynQiO9U2XHaGKNmjEi6rnUDcIchpEGQaHJSnQyCB/7sp 7Owf/Ggk0KhQkGYELxIs5McngueMFqJwEyykRxeQVrU5sNAcy2vDQXpByoqYEk6oBKLbUumUFOxJ IPAIF0FS8JgjEqQYeSMIFKfCAtdNsTJV1AYwBXJFFQxMIOCwzFZaQBBtcAUIBaGUpaqJuWuWMZtp HAgy3EiX/REEGdqMx+jiSBBVjO5UE9TLGdoHT+tEaRqCNEglbDYGR+iTIfzI3dIG8o7cmYxRVGAC 0iJhkEgAjwqDcyHS2sC7VgSPsARpxfIOgqwzlTKkH12lKoO4GEQYJA+LeUFKTvAYZRjEXOgZyLum 8lOZWkazPK3MDxhlGRvwbn6XmQ9BwNGVpP92ZanMxCamJBZVg7juHwfs7T+2MTrX2eOrBHGHy+5K kH64zJ7/UK4GHcHcf+SjfQ6ZRj/7aolmNOMdNrwd0Jpgw6wFb67/EOzRqFEQZwSPvQRxr/KuwKyO Yg+yIZWsebjnFLs9caTK4CyHDDLLAQtklyjwLBKFM5DCZUVLyoBfUoW6VNpuxQa25QpuBZIK3XpY uAg5BzHMsLGuik6ceYQgQVaTFycgRHV6qQT+8iLIIziiGe6oSClw54iHtAJ3lzwIJ5sgSoGotwn/ HIg5gpdkgYjjeLdJ1kkl8tHIUna/JG1KDpPUX4GgoikGJl8ue/MHVJj5zKgQTloMl9rKjI//f0KN ZTNlO6nbHqTDT92tf+qCEG6IgsQIpI5A7DiyRRyE0OkkCIzDhBAWGyEMAylrjWNXCfQ+xBG4eyRD IoG7IhvEsHula/Au6FDgkVrUwDsId86EtoXkIRlTPuWReCgn/mZIpKoEKp3S8mUBD+Eg6xoIPJr4 mPWsuTJRumlWDFIEobrqcVspLf/sbBA8W1PPAuRzc4mBg0ALF9F1PIjpxLRoI3DVII42AiT7OOnY jaG6DME00DS9EIH+jN4Dke/RgpxeKJcaaQY5MkIucKZDLCQbQXn1Sauc3yvfWr8P1/VieA1mFPza IMEGKrEBp+Z/BLUyA7EMEQwiHKJCskQr/4jlP5R6Zw/nGS6C1hegva3tQceg0OJW8UDK/dYVu6y5 xwhku2Nn6YXI+94PeUSmEWLQpKEa4JhMddShftkzuWAhExKKYWQdLVrHuhcjxbVTKjTbXXvZKYIq SMa9RWY0u/3MMPn4sgUi8oLo1DLP5DBXZNA+llfb5ddmS8xPsTEcLIIY3Ahuzf+xCLqIzNALFB3k BcIIMF1H3NaBtEHKUYowDP0JiGzI0Zkgi6TjrvQHkQXw+Gpkfz/9aAF3PUGSkazwHGUwC8evUFo9 EEWEHeInUPk/tAFgtDtxIH8Lc2/8mxC5qyDk7ClIT+s3kHppmNnULoi1m4ptp5ol5jNAjf8ZvPmP c2hTFY6ngRkOLfkViywvmldrgRRij22UQg01LnpCfAa0HhekH+U1EPz3M4+AEI8APJ4mcFMHewvY BAmxIGeydQXBJkSiPbPGdUDBewJxCL/ncCdgWXeTWcK2GCggfKAVZj/wGCAoU6igDOAwPsJUGYYi HIMDD+sxL180VNjld9oHeNw3MeaHGq4zF8JVDXUhMq7TD6Mzef9QDiOTF6Pyf05gHdAVXe4wDceQ YwVBTxqEbwihXUATBQYBhlPwCAUoENSQOwEIUD+DNOilgP/GgHHogAiRDclSAX1AdvuQDG3iJhbY dRhoARLoLeCDZWJHN8tCNovhByuFdhf/NxDaEFPIdy5T1g9MVBmlxWb/4GBZ8VPwYC+VERaL0xXM t3LZRxD283KqaDlBWBeu03jCBQ+oQQOf437tB0mic3k+Z1YCEVaMZhD4FzuPlA/eVYyhJxCKhDtF N3okJBBxhTuWYBADyASA9Xp0OIexJ3UIcQh32B084ALgkTYX+A/1kBQusCf7wANz40OLwQPoqI6w RBDggnaMiFIIlnb/MGyP8QMnlT4o4GYDoWzFIBCjUHKwJRypwAw2EFsrYFXYd33VVhaBt4rO0Yp0 IQqQJAobwzszd3MxIxDEtYQFUQq5WAqDMw3xRCrxxDtopUHM9Q6C1GT/gH9heGriBTRV//gP08gE b7VjS2eN2Uh1r7cErtaN3kEYYkNrBgGOQpEC1NIm62hrizEEeVCITeFSA1EPJIgCL6AtTXQ3eUME RHCC/6gH6KNa+LNFaqkVDZkQPIiKn/GDFPk//7AxQbAHi9BtG0N+indz6rcI5NRATKgvD/R+RuAE jDAJvthig9MPT+AyT8AIkul5GvQELRSTGKRBP+MIlmBvPxMFvPOMuEMFZphXuEMGvFNXeiWHQIlJ S/CaRLkQ3HiHSHkY+aUI32EBHDhZdDKPQsR8vSZgvcEDueQtKbhxKMACvHN3WRElWiQcQHCQJeeQ V3KKzIQfdOl9cnlGlEBzellVBQGL6f83MjjAQDhXEOeQixR0mFo4EMq1nkYgSNXFhbEjk/+gCjWm BCEEb/9wkyIENFJwakaGO9fYmi0Em6/ZEN/gA8lijtdzG/mVjrTxIB1IJ+koRApGYMY3FcqwdtVH lnnDAm92YJVhlm1WGTYADxFGP3+AXRmWJXeGnTCynZjTD2KAQDjADYRXFxjZXB0pOttgOoMpEPFQ mJZnHU4QhRj0mOsZOx/pnphpEDQjSEpQpVWqfwIRDlHwnz9DBgI6oLgTlKxpZAgamw3BDr1ALd3h Aj5wCBoIoeMoEPsgGELhAs/igezIGIhAJy9QioBScSiQAiLioeRzj1LRogdRkJUxL8r/UDhfYSjG 8CEtUAR6oAwu+pAwGpH4MaPZ2X390J3TsQcw0Zc40D79gH5HCAajIqQI0Q/HUJhIegyXqi+lwKSr UwpfGl1RGnBjQKVK4Ai52lyysKW5EwXN4KKqCTQBV6bLiqAIwg4hoQgPShH1UAxmJnzU06GogK0M AQ9opg2xRhDFlBUiWhEWdmE7Yg/IsAqrgAwjyhDqSgyIRxHusAzHcK/82apXeK/36g6zChH5MA3F GA5rmBDvUIzfRSYKu7AMkWaVUa4SAQ4otwJ+yrAWe7EYm7EMq2z3MpAQoUVcIW0aO7IkW7ImqxOW KBwvUAy/hUSpsJDDoTgnO7M0W7M2YxsR8MCxqjUKqeAnPotM0pkVMnuzRFu0Rkuz/fBLa7m0iHq0 Tvu0ULuwrrS0W2QD3Bq1WJu1WqsT4DAZVJsVlbq1Yju2ZHsTMjEKYhkcQEAEepAK2vCvZRu3cju3 dFu3NRsQAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAA CAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAA BAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAA LAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkE AAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+A AAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkc SLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAI CgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAE AAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAs AAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQA AwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AA ACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxI sOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgK AP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQA BAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwA AAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAAD AAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAA IfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw 4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA /wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAE AAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAA AAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMA AAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh +QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAMgAAAAsAAAAAAQABAAACAoA/wkcSLDg v4AAADs= ------=_NextPart_000_008D_01C1EEA9.B154E860-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 8:49:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from postino4.int.prima.com.ar (postino4.prima.com.ar [200.42.0.162]) by hub.freebsd.org (Postfix) with ESMTP id B1D2837B404; Sun, 28 Apr 2002 08:41:47 -0700 (PDT) Received: from pc (host18.200-43-174.telecom.net.ar [200.43.174.18] (may be forged)) by postino4.int.prima.com.ar (8.11.5/8.11.5) with SMTP id g3SEftI49989; Sun, 28 Apr 2002 11:42:00 -0300 (ART) Message-ID: <009501c1eec5$bf10c5c0$6e30fea9@pc> From: "RoosterStone" To: Subject: oportunidades hay pocas, vos decidis Date: Sun, 28 Apr 2002 11:41:48 -0300 MIME-Version: 1.0 Content-Type: multipart/related; type="multipart/alternative"; boundary="----=_NextPart_000_008D_01C1EEA9.B154E860" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_008D_01C1EEA9.B154E860 Content-Type: multipart/alternative; boundary="----=_NextPart_001_008E_01C1EEA9.B15E1020" ------=_NextPart_001_008E_01C1EEA9.B15E1020 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable =20 =20 Estimado =20 =20 En primer lugar, nuestro club es una empresa formada por = personas con los mismos objetivos e ilusiones. Somos personas que = queremos teletrabajar, por que sabemos todo lo que este tipo de trabajo = nos puede suponer, tanto en calidad de vida como en ingresos, adem=E1s = de ser personas que nos gusta todo el entorno de Internet.=20 =20 Nuestro club, esta pensado para recibir dos tipos de = ingresos, por un lado tenemos anunciadas en nuestras webs, empresas que = pagan por navegar, es decir por ver anuncios en un visor mientras = utilizas internet. Ej. Digital public paga 80 pts la hora de = utilizaci=F3n. (AFILIADOS BETA Y ALFA)=20 =20 Por otro lado esta la actividad que propone el club, que la = desarrollaremos mientras utilizamos visores y a la vez, generamos = ingresos dobles. Nuestro club tiene creado un software propio y = exclusivo para la red Hispana, y necesitamos personas o distribuidores = que nos ayuden a dar a conocer nuestro producto. Por esta segunda = actividad tambi=E9n recibir=E1s unos ingresos bastante altos, basados = en una matriz forzada de 3*8, la forma de pago m=E1s beneficiosa para = nuestros empleados y que garantizar=E1 ingresos fijos y crecientes. = (AFILIADOS ALFA)=20 =20 Te comento que hoy por hoy, el software que ha creado el = club de afiliados.com es =FAnico en la red hispana, tanto por su = completo contenido como por sus actualizaciones que ser=E1n constantes. = Este software consta de programas y de informaci=F3n continua y puntera, = todo ello para garantizar el trabajo de nuestros teletrabajadores.=20 Adem=E1s la forma de trabajar en el club, es lo m=E1s = parecido a una empresa de la calle, por el tratamiento que tenemos con = nuestros empleados, que ser=E1 constante, personal y con ayuda desde los = comienzos para ense=F1ar a realizar este tipo de trabajo, adem=E1s de la = seriedad y responsabilidad a la hora de efectuar nuestros pagos a los = trabajadores.=20 =20 El software del Club esta automatizado para la venta del = producto, desde la presentaci=F3n del mismo, hasta el env=EDo de = comisiones por ventas, dejando una m=EDnima y sencilla tarea al = teletrabajador.=20 =20 Te resalto que es una empresa de reciente creaci=F3n y las = posibilidades de integrar puestos importantes en nuestra empresa, son = verdaderas, dependiendo la seriedad con la que realices este trabajo.=20 =20 Ahora te emplazo a que conozcas nuestra empresa a trav=E9s = de las webs que hemos creado para ello.=20 http://www.clubdeafiliados.com/web.asp?asociado=3D2561 Te recuerdo que nuestra empresa, es totalmente diferente a = las ya existentes en la red, porque no es ninguna adaptaci=F3n de un = programa americano para la red hispana, y por el tratamiento personal y = de ayuda hac=EDa nuestros trabajadores.=20 =20 Aunque trabajes en Internet, y no podamos verte, estaremos = en permanente comunicaci=F3n para ayudarnos mutuamente en nuestro = trabajo.=20 =20 Si tienes cualquier duda o consulta, contacta de nuevo con = nosotros.=20 =20 http://www.clubdeafiliados.com/web.asp?asociado=3D2561 =20 = http://www.clubdeafiliados.com/centronegocios/centro.asp?asociado=3D2561 Un nuevo concepto del Teletrabajo con un=20 programa pensado para sus asociados =A1 Ahora todo esto est=E1 a tu alcance ! Trabaja desde tu hogar en una actividad muy rentable Para cualquier duda o pregunta, consultame de nuevo. Atentamente, gabriela gallardo id 2561 jackox@tutopia.com =20 Todos los derechos reservados ClubdeAfiliados.com=20 =20 =20 =20 ------=_NextPart_001_008E_01C1EEA9.B15E1020 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable
 

 

 
3D"Afiliadosmembrete.gif=20

 =20

Estimado

 

 

En primer lugar, = nuestro club=20 es una empresa formada por personas con los mismos objetivos = e=20 ilusiones. Somos personas que queremos teletrabajar, por que = sabemos  todo = lo que=20 este tipo de trabajo nos puede suponer, tanto en calidad de = vida=20 como en ingresos, adem=E1s de ser personas que nos gusta = todo el=20 entorno de Internet.

 

Nuestro club, esta pensado para recibir dos = tipos de=20 ingresos, por un lado tenemos anunciadas = en=20 nuestras webs, empresas que pagan por navegar, es decir por = ver=20 anuncios en un visor mientras utilizas internet. Ej. Digital = public=20 paga 80 pts la hora de utilizaci=F3n. (AFILIADOS BETA Y = ALFA)=20

  =

Por otro lado esta = la actividad=20 que propone el club, que la desarrollaremos mientras = utilizamos=20 visores y a la vez, generamos ingresos dobles. Nuestro club = tiene=20 creado un software propio y exclusivo para =20 la red Hispana, y necesitamos personas o = distribuidores que=20 nos ayuden a dar a conocer nuestro producto. Por esta = segunda=20 actividad tambi=E9n =20 recibir=E1s unos ingresos bastante altos, basados en = una matriz=20 forzada de 3*8, =20 la forma de pago m=E1s beneficiosa para nuestros = empleados y=20 que =20 garantizar=E1 ingresos fijos y crecientes. (AFILIADOS = ALFA)

 =20

Te comento que hoy = por hoy, el=20 software que ha creado el club de afiliados.com es =FAnico = en la red=20 hispana, tanto por su completo contenido como por sus=20 actualizaciones que ser=E1n constantes. Este software consta = de=20 programas y de informaci=F3n continua y puntera, todo ello = para=20 garantizar el trabajo de nuestros teletrabajadores.=20

Adem=E1s la forma de = trabajar en el=20 club, es lo m=E1s parecido a una empresa de la calle, por el = tratamiento que tenemos con nuestros empleados, que ser=E1 = constante,=20 personal y con ayuda desde los comienzos para ense=F1ar a = realizar=20 este tipo de trabajo, adem=E1s de la seriedad y = responsabilidad a la=20 hora de efectuar nuestros pagos a los trabajadores.=20

 =20

El software del Club esta = automatizado =20 para la venta del producto, desde la presentaci=F3n = del mismo,=20 hasta el env=EDo de comisiones por ventas, dejando una = m=EDnima y=20 sencilla tarea al teletrabajador. =

 =20

Te resalto que es = una empresa de=20 reciente creaci=F3n y las posibilidades de integrar puestos=20 importantes en nuestra empresa, son verdaderas, dependiendo = la=20 seriedad con la que realices este trabajo.=20

 =20

Ahora te emplazo a = que conozcas=20 nuestra empresa a trav=E9s de las webs que hemos creado para = ello.=20

 

 http://www.clubdeafiliados.com/web.asp?asociado=3D2561

 

Te recuerdo que=20 nuestra empresa, es totalmente diferente a las ya existentes = en la=20 red, porque no es ninguna adaptaci=F3n de un programa = americano para=20 la red hispana, y por =20 el tratamiento personal y de ayuda hac=EDa nuestros=20 trabajadores. =

 =20

Aunque trabajes en Internet, y = no=20 podamos verte, estaremos en permanente comunicaci=F3n para = ayudarnos=20 mutuamente en nuestro trabajo.=20

 =20

Si tienes cualquier duda o = consulta,=20 contacta de nuevo con nosotros.=20

 =20

 

http://www.clubdeafiliados.com/centronegocios/centro.asp?= asociado=3D2561
      Un = nuevo concepto=20 del Teletrabajo con un=20

programa pensado para sus=20 asociados

=A1 Ahora=20 todo esto est=E1 a tu alcance !

Trabaja=20 desde tu hogar en una actividad muy = rentable

 

Para cualquier=20 duda o pregunta, consultame de nuevo.

Atentamente,

gabriela gallardo id = 2561

jackox@tutopia.com

Todos los=20 derechos reservados  = ClubdeAfiliados.com=20

 

 

 

 

------=_NextPart_001_008E_01C1EEA9.B15E1020-- ------=_NextPart_000_008D_01C1EEA9.B154E860 Content-Type: image/gif; name="Afiliadosmembrete.gif" Content-Transfer-Encoding: base64 Content-Location: http://www.clubdeafiliados.com/webayuda/images/Afiliadosmembrete.gif R0lGODlhyAE2ANcAAAcAAAgAABcAABoAABYPDyYPDykPDzUAADwAACYfHzUfHzUvL0MAAEwAAEcP D1MAAFsBAUQvL2QAAGwAAGcPD3cAAHwAAH8PD2cnJ3MfH3UvL0U/P1I/P1RPT19PT2FPT3RAQHtB QWRfX29fX3FfX3Nvb31vb4MAAIwAAIgPD5QAAJsAAJQPD5wPD4ofH5gfH6QAAKsBAaMPD64PD7QC Aq4QEKMfH6ofH7EQEI8vL4M/P40/P5kvL5I/P50/P6QvL6kvL7YgILEvL6M/P60/P7Q/P7sEBMIG Br4ICMUICMgHB9IHB8wKCtMLC70SEsMUFMUZGc0XF9AXF84ZGdIaGt0GBuAHB9kNDeEKCukCAugL C9wSEuESEtodHeEcHOgREbshIcQjI7gvL8wmJtQnJ9UrK7wwMMQyMro/P8Q/P9A2NtwjI+MmJtwr K+MsLOkkJOkuLt0zM+Q3N9s6OuA5Oeg2Nuk+PohYWJZcXKZPT7RPT79AQLpPT6tfX7NfX7tfX4N/ f4x/f5Zvb5t/f6Zvb6N/f6x/f7Rvb7xvb7J/f71/f8RBQcpCQsFPT9RFRdlHR9dISNxJScVQUMpR UcVfX9NTU9tWVtdYWN5aWuZHR+pDQ+FLS+pKSvFPT+hVVeBYWOlaWvBbW8tgYMNvb8tvb9hjY99o aM9wcMV/f81/f9VxcdJ/f994eONmZutmZuZoaOlra/BgYOJ1deR5eet6evFxcfF/f5KPj5qPj6iP j6Kfn6ifn7WPj8SPj7ifn8Ofn7Gvr7ivr8Ovr8G/v9aAgM2Pj9KPj9uBgdqPj82fn9Sfn96QkNuf n+SEhOqFheaIiOuIiPCFhfKLi+SSkuuUlOCfn+ubm/GVlfSentWvr9uvr+ShoeWvr82/v9O/v96/ v+K/v+ujo/CkpPStrfivr+uxsfOzs+q/v/a+vvi/v9DPz9vPz+bPz+Df3+7AwPPBwerPz/HPz/jD w/nPz/XR0e7f3/Pf3/jR0fvf3/fg4O/v7/fv7/ng4Pnv7/zw8P///yH/C05FVFNDQVBFMi4wAwHn AwAh+QQAAwAAACwAAAAAyAE2AAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPH jyBDihxJsqTJkyhTqlzJsqXLlzBjypxJs6bNmzhz6tzJs6fPn0CDCh1KtKjRo0iTKl3KtKnTp1Cj Sp1KtarVq1izat3KtavXr2DDih1LtqzZs2jTqn0JDxmxt9X6TTy37Zhdu+7srY3ozxy0v9DE3dub FpyKw4fBlQQHo3HjguccPyZ4LoZlywNFXd5MzGG/bYtoiB5N2kmpciObJVm9umMzKbBhc4S2pXbt hO822d69xQ0sf4TLGkasQjFJxpIhS4YBeXOMgcycX1bF8BgO0tixGwmzLaRq1klcN/9pEns274P+ dPNe3wVa8LHDERsfidyx8uSUnQ+EJ/2yXITxmJHdgKMZYSAj8Xz0HWuuMTHeeObtZhA9baxnYW2f APfeV/Eltthy99mX32YELWIiDs6dA+B12YFh4iSLMOIEaQYa4UR3roEXHkfNMOEghBvRJiFB/tBx oYVXXEHHhhwSV1xJ8KAhpZQhTrbflGjscZA9znVmUDwsjnbGNnoZZM8yZ4hWoxE4brRgazz66GMT s8UmG0G0rNcGLe/06QwdSQZ6hSxMdtXhky9Fhl9EXR4k4Gg4qMiQO2esaYQ7POrYoJxMcOSMnVIQ xM96r2hIkDhdCHrFO01980023xz/tM+r3+xDETu0xgoROOBoAw47G+3DqzK82uoQPL2CA89ChxrX T7JlMmQPr8zwGm1EiorIKGcGEWOZaGb8Z6Y77iQoUD+lrOnEtQjR40457tCj0Js7/pPPO+W8I+5C 9ODLqkA9cuopqARRU1ugryR0j6quKLWPIhdUUIEFFqSgyED79EHxxnnU808yPoQcMkL7HOLCxhac kEIfHitUjx8nxCzzC6gYO9E+qLyAws48o0CzzWb+wYKTLPzB7kDN9jOKk0Usm1AqNqwg9dQr3JDK vgJFiWWVzBGk9ZQEMWPiIs4FYWI156IYAw049BPP2CYmuE2YZ6AmULo1TpJQP8eE/2HpE8dgDfAR RzCYTyU6lsKPQuGUwWkZ1PwTsJwFhRPJ5ZcbZDnmkRTkzINACrRJE4F2YepBzqi6+FH75CDx6xvz sM8+PKC8cQrsKGL7QcmkYDvFMh+SkDIpyGx8zC8AKxE8PPTs/M4vOF2QMkM7SVwqBx2qDRDWq7AC Mwf1AwTV5Estg/QC1WelQNmu/09kJA7kbX+XeYnMZir2g9023Ay4zECTWJPdChKPJ1hqTU+QV0Ga QbjCJYEeUdDRaqagQIOUglOcKsXkfLTAH4VuIJ8DnedARydRiUMWc0iYQvqhKnEg5RCvg13sNPY7 iqUgD7srSDJqCDyZ9eEg7DieEP9V1rKH7ENnz3seC4D2D1TwrHuI+YNBDtUCKEptPgMpQvm2eIN9 qa9rA2kfGNkHg/gJZH70i4GXyGaZRQwEDKQRBRz9dy6/Hcgg5XDCAf+GKYIwsIFJeIIEWTOF1RFE FhjE4BQw2EEPGiSEDxqhCCuyCUG1gnUxfJ0PfMdDC2yShwX5Rg0/ebyLFeQFx0vBEITIg4g40Xkv IAISe4YKgmijZ4dhARG6p4yCHAoxNuAecVZgg331Y4tA0CL5sIc0EFHGmWFszGUIgkb6eWkzaBPI JAiUHSeYaxtr6uO59IhARhzwCfv6YwMdqIYxSNARBXlHIpkAiUXOs5FzeiQJJRn/yYqkLlCbOMo3 Mik7gfTudz4wVjY4ibKCnAxlvRhI745XxI8dzw8C2QfMjNdLh+yDBT1jwXzs8YOevQBjIOUZCzr6 j2JUL5detF4LjAMPYXrvewQBB/koQZBRUE0GOYUmGRc11GmG8S3VjMEi3qIi/vhHfgM6wzFUMaPR MGIgdjRCKQiiCktNYyDHsBR1BqLOBqohHwJ5RwTBU8F/WAKDpfgPNe7pR0by84P/gCReI/LPQB0l GZnMBkGy8TvlCUSUOTSo7ZJRkCAa74cDyYPxTkqQVcpsCA+BxxCGwDNtFOSVPBsIaHeGxX8cipnp sx76+lHFw6ygCAQxBvmwpkwh/zStmUR9n1B1K83nHKRRYTTjP/qHnTMMJB5VFU0fVUEDAzmBIOQ0 0FcJEtYaoZOs6zzCdQfyDh2N9R/9wCA8C5ZIfHLwriUE4T4rIg5VHUURmTTIQzcm38T+wwco88FB DmG8FBDkVahAxRBYKhBlHI8i6LOHS503kFmiQIoG0QNxKJta4ujBIEtz7QoIkorZFsQegjPtbsVY Jd8aBLjsuwwYCGKP7LTpH9sgzVb/EY/mGshc7lCXQfphqQEeI7vNMAjiWDPef8iTUwMciD0pV1eB LXC96p0kRcTxoCS9N74FwWFDs2xf20XUIN84nq4YUo/jldaI2kBESZ934X/Yw/95njWINpwUrUMZ Y4rDlF6Hf8oHZqAveyMOtGNMXBAUv0+4/wiTaCT1xtE8VyAzMtD//lHdOxrEnDU6BlizK06yagpg di3IW51M1lCTFcoC0Wt6J6LqK8fQILrbMkFiTd/D2m7MBTnelxti5ogouHlJ5JlxwOG8o7nZSfNp 1o6HOZ89b1EGRUjFn9MnaG0N1doEMXRljDqQ0JCG0QIRBWn6yAg1jRVvBpLqXe6SVSNcVSA/XudB 3uFAOEmOU2o4yAY71WQm+xHVeQU4X0HXBVe/Dtb2FQitKTYQxG6sogQp5UOOV0uPIiLYzivGQG7Z s4Q4Kc6mRfZBmD0QZ29xajf/KK1Oc/tFriHE0P/YDDeoub+CxHg0kz6GVQWC6T36/N2Uzu68AZkE tP6jFEmQU5H7fd5Sk/rUUk61wP/BD2pEbiGeAF0mDC4xhMt6IAu3QMNtB/GBpExmpuS18SrOENph nGdEwCLHQ4sQkVdYPiMnTrNPvkXwIU1q2G75M3M7EJizMQaiIAg31jaa77KPNJqm9M7/0XOfHxDo 8W7g0NdpdFWwhglLd7q/Qf100vczyqenOjXmMJ42MGQNoCOUUeD76oKE3eu1/ofDKYZrgpw9Zrtm yPFAvpDRPu8HqJg2sXvGxHPZPeR6N9PzTb4CezBjFOMrX50B7z7BR5PwAoF5/3Qsg4NocYnxNFgx ZSAP78nXZd3wt4sa1oR5I8jbIPS+v+TAE3rSj/7epQeAP4JeBPEIJPQvCGEOJGQOXFcBuMdwtpdY +7BYQPR7J9B7h2UQjiUzZ4YQwNYzQ4AK4NB8A/FmPdOBhyI9h0Jgd3cYekY+BNEPskU1PJU+U9N9 1eY+hcctBREElyEJBIEi37Z+oxF5OicaQMcQlTdjlGYgDdRWg6N/DAQeB+EIpiaATSd6WRhwURcO JBQHexMHoCMFIQYUtHdwEfh1CmdftcMxBxFrMmMsIMMDcTg9x0OCB+E8edB8xYAKvhItDgZhBfEH xMECOeUkgjgQGYYYHAaDBf/hU1MDBH/Hfb6Ug2OUbTyoeNjUbd8iGm40EMvAfpKHhAPRD+RiF0dj QDUyXU3ohEfAigNRCetUZPnnQFDYD1FwhfsGha3wOE8Wdf1ABSR0STuWdaDjDEhxhl2XhrkHdvbV C7dWEPvASTGTBwOxgTHDWJVlPK2UUwEWYASWArQ0RRknEMb3Z/CAiIdIZzFoA8QBWyVHPn6niI5o WlRzid53bToYfplIEJKwif+gCpcxGqIgF2BCGjiyTaIxVv0QXVpVENNgKdFSafYXBvtCD9n1Xf2Q XUzof/+3b7I3EGrAKY/QSKnHhaDzCAjYD+EAe6CzBmVohlg2awn3D7eHMQz/VTFjxg5tCDy45gL9 VUQbJTMsiArGg1mR1TM8cC3MU2wZlVI7wwLSAw8v5YLrSBxAUCb9IGHEMY//QH0yAHLwIANUA4/2 eIOVmFsk9lv9WIpmsBmScA6Hh3404G2kUSZzRAOTdnQ9NhDu4JBJSJH2F1cCYQ9qkF1tJYvrFA4D EQ50pYU+wpgC4ZgkaV6rBl5iSELj8QhSoJnjAYVEoYwOyIwQSJNqSFi2wwMhg1A6JESbhUqTZRBG eVm29DyblQcfyDOIQBDFcHxEUFLqeJXE0QJEQAStBUz7AonkYwNFoEw0OIlTk5bYtpYn1pZumUZ0 mR2fWGOjYS5u5pDuNgmV/2IpnSaY9vcEjMAI2XUEoVeLZuUIh3kE5cV0cqIGljCSGHR1kDkhnemZ /imZyTiTzqiGNlmTh9BJKFNQBeEDQyREhiVaR1kQnPV2PPMDTOQHGEccP4A1h/IDUHQYxPcPzklM fCc1KliP1KaWu7WD9bM3/5hGCpkdZSJuoqF+AwFOllcjjteKNWJO60k4T3A0qvCjDeQIhKMEW7hv VjhPPmJIHslvBUEPZOCfD7IESyAFoFkUovmAYkeaXapDCOpJJEg7DRozuHMQsxkzSIkxE/p2FnoQ Fxdsh0EEgtMshMhLBXFMVAMPf8B3qHWW0RlUKgp+MWedkOGD0tE21YAdOP+AIy02Gh0pEDhqeTvK owbSD/P3o51WivG5nuGgTkqgBObFBJjKpEE2qgjRD7KgmVZqpVLgDDE5FFtqexPTjGtIoAJRD/j1 OzygjQmhCLB5UWVnjhFqEMqQmybFgr5EBElEBCGKNCKXCsepAi3wrMZwU8QkEMxAlj/llYAqNdLp PtRZaIZqEPCgCiZiGZNgLuewTWAgCtFilzRgbJSyR2ewqfBmKeDVVeukBlk6EEO6TmPAKmUlqn4U qpSjqhgUBfpJnytEDa3wCFZKBo/QCuEQq3uxD8mgCBybDMOKEN/QC9+YDXjoa8rwjaigDNOGEPZw suBobAzRD8qQCqnwrAzeoQ00W7MYixLbZhnhUhGhOBp6kxDxsAx3QSYSYQ/TgBcN0Q/T0AzNkGQT wQ+f2gwXWyhYuxZz+bMSEbSiUX5ZG7ZiixT2oDaWEQTgJi0xKhp7ObZu+7Y+0bOXsQgztxDnQKNx BLd6u7c6MX7OgQNLhQznMLjnUA3EMAlCiB2Jx7eM27gyAQ+Iip39ASkv5riWe7ko0Q/EYLaSO5A0 UJCYG7qiaxKa+5adGwNgQAwwO7qs27oaYQ/IcAon4rMmQgzVsLqum7u6u7u827u++7vAG7zCO7zE W7zGe7yhGxAAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAE AAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALCUA CwCNAScAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq1Bhv2rFJjCodO+Zuo8mTKFOq XJmwXjJUQ4YgUrYv4j5lMGMS2YlKmT2WBO2lGjr0J0o0SJGSSrmIhlOn5xL2O+bEiNWrWCuVBMq1 K9BkPcL2IMTVh4WzFhQR/Ib2bEFFFk7I9TEwhdy7J1Ioc6hsCIq/gAP/fYGqJktwKxInBpcShmPH aJg+hYpwW1WsmLEyMuq1s+eLiSZUGN2jbFu1A9m2fRt37sA8ePEyVgjuheDbt/0YTolY8YrZJx9D ljw5qsFSTzMrN/Jk6+fn0BuGFl2hNFCzaFELVI2WdWu6AnvF/76bR6EfubjTA2ahTWVvxcBNCocR GWXT4scnO12eeVv0/wAWNB1ppmW3VlsWeOeaQOwMgYofduGV0Hl3AfaCH6hkiAoiRLCAGyq8+fZb Y8LVd9J9Txk3EDf6PXWGKiOpcoZyT8QT4I3RDVgdV3344KMPyRy4GkHJ/OjDIQehEhtCFN6VQmEJ aePHbX+g9N5iJD5mokkoUkYQGC2eoeJA9jCSWRg4punZdKJZFx13bkX0zZIGaRObbg3Z84Nge5kE jgq+xbfRfFtu1CUNY27TYikKHdOfmpBa9M1uCLG5o0D7fMPOQ+x84+k3FMGZoJx0ErRPhHL1eZA2 qBQT35SBwf/DkDZEpaJNPwn9CSiW/8CTCh98pMKNQ9yQghQlwwpEaEH9nOOss7Ia9OyzBi0SA34D naEfGLgqVApmaFpUDyE6lMvLbvXgoYMGd/zCoDfweoNQNnhoAAEEOhhSz0K/6ECBBBJoQMi+E42b A8AAX7CDuwl908cFE0R8QR+gHsTmBKV9k8NoFUxMaUHf5MHxyDkEadAhRpq8HYIFFfkjkgOhPAQP scU0xEDK4IXIPxQO9s8+flnYnkCw/kWEVKmooPTSSo/SbUG6wtcPHyKucIOgUN8wHww3RLUsQefA EMPYMRQqENlkVzt2igR9BKZT/i3UT2bOSfQLBffmjcE6/6z/g3feENyxjw6AG8QO4YDnbQhC+2iA 8OMUMAzR3Y8jHHEOmxa0Tx4Rd+55Hh//c3EPyYzM8QWZt2z66n0YhN1Z2v0jqndngSeQD+OV+sJd LwhUDHp/bY6bqnoEpipB8LDA9PIqtBAtQbruakwLVSvGDELMrLD1Y8x8PVDYYo9t9j9oj6322oge ZA83xzztLWbHUFQPBQ8kDgEF3vydeLmFE8SO/vaDAB4M0rjKVU5yDfmGAS13OUrtIweei2ADBeS5 C6zudB/7xgVXB7OBvC4tQuoOQeCCFtv9A3e5u4tA6oGXPoGjQihAhHqGtg8P+awgyWMe85wHNaZV r2pYg0di/7ZHxEKBj2zjK18Mzre2MVFkG5g5A0UI8YD62Q+AAcybqTKQRcDxoiCGgMACH5c6hmRg jADrXCIIwjkJSrB1BLkYdTYIx9eszgUbMx3BbneaEMZpICSsHUFQmMITCCRnckkBQWCoHhSwwCjF CMzQBvKD5bFgJ8wDgvuit6vEAKEINqjaDQxyA8U85gZIKWJBwBe+JJaPiWNz4kTOQQPMUEQHVbwX IfaRLvvhYR/74IX9CEIIwGlAXuMCHAV2sw+8Icxd+8DD48rTkF9ArmLBlEDnMjCQX0QwETWpRx8i WDGByLECa/xHPfLIsT3+wwUjAx2m+jCyOp6wj6lh2QjbYv/CZChCEX2IjYYEgoi73GwguwPeX/yg jKItdCA2RIEeCKKM5f2hW/3Qw/KOx0lAtQA42RPR9VYkIhgYg0xC2JoRhVO2gygRljGQpUT6kRyr UKSK9cMAQe6gTIKEsX8/018GKIUHwC1OIL+4F8COKpAdPM6dCeGFUwGGwH9os3MD2YHn0vmaz8Ux gvbchwU51guCmK6M7xyND6jJRwPlc0iA5OdB5iQhggzhLiB6DSPz+g9tCMYoMgQMQYjAtKMV5AVM swH0mDfSgRhDRHwgCNV8k4qC2EMG3hMIK4djkJcWxFpok6lE9GOEm+L0DgTJBuB0YKrEdRNwVW1m 3jQwkHr//MIQ6iqjNZ8ZEXbshh15SGPEVug5bmougruRI1QJEU+zjuxjaPUgPlcGV4EE0gImTE2p BHJXufD1H0qCIWf+Edi/7KxXgZlNP/6ytEnibHnP66hiDSID38iAIKX0jfsEQonM/mOz9HHpKz9b PtFGpEU2kghOH8BUgay2IPbSokCKmrfQ8bTCDPHG47j6ENvi4YwMpKY3O0cWg/TAc+W8mAsMokGO rXggq8tDL6JbkA/Gbnb7LOFct/uP7p7guy/ECwosG5jeCSSieQUHe5W233/YY6MD6egoDjJZxRil HyIqwkG44V8AuxJtMDUwRFpk2io2+B8PJgji7jWQNRsX/4yAkxdDHreDhwTzYAuMWMUuVlVzbnUg ozNIPUzn3AteoAe9gGpbYefHUcVVxyzmcXhPwNafxWbIBeFBYIxCBMBMFLyAURo4Rk3qUS+vsgLp KKoLkgoRzeZKK6DEQcDRZf+ebcAEAS3ZxOwQWuqnzAwuSJrbDNQ1s9YgP72XnBdCZ4dQDo0SKPE/ CIFii/3Zz51zU6FHs+0NVgeqNm407bC747rijHeHjc3HyouC2ZTXsKgIjA51OOVUL8+9A2l1oFIt olUXpNYlEjCYCRxahNgDGU0+iKIm4wRgn3nYAlkzBIh9r2PDOW/LVkizGZINaEsgB+WcdrUNcjGu BtoghP+GsbdHhrpBVsCt1BXhowUZaXOvEC9lhI1sChJvwOS15yiAt7znvTzD/qOjWPuHvuHDb8oi BOBaEnjaCL7rgsRDFW+rRkNUoZ9JOFzYebN4xIudNwocJNkQyDhC6jHNhoDYgDlIhKL5bG01Atpz 2mZQygViun1kQxE9WF0OXA5z2elz5uSuuQozfRc/EGTScjkvzgLz8/UccieYz3zmTx3l5Z3UIEvn Faz9HWWoc7Ygns11gQliBrTRYBENcYJ+lvF1gkD8HxIfSDHzpujc19Ybv6iqhhHGYYSwo3JxD7lB RhwxaRPkxJ1LsecGDzKSddtUvTirB0fD6LfK3LpyVbz/XAyCSLmkzk54MfJAgI6Cyv/lBxDhvL2Z RnqBjEJE0bIHZGdtehjgQOrmQ3WxRBCioES8tgwtMl4QsWAPF3YF4Xv/oFqKUxD1YEwDAThvJhCE 8DjZwBAKhDB1VhC/sAN9kAi/sC/1UFwEhFx35znLVU/dpnyBxzHa4QPcB0Le90fgB2kgw2MCQTNy 8QKGwUKxUQwE4VDuF3SaQ2oG0VGT1FGfVhBAICIEUV+KMUoGQQr9BwMHET5Tp3oF9z1KxC0JEQ+L UhEMCHYV94BA9Q8YUHZldGH3wlR5EGcD0UyPQymEsAN8GIL/cHwIU2k/83YT0IH/oFV2x0Z491We E1Zj/zUaZaVyNFgQMzgaNXiDN3Z4O0hzPWhzA8EOeMEDhjEeKTAb8CAYQ1M0RtdpFmIQf7A8nNFR KqCAsKZlA1EErsYs9RVwYLM1TnREXzgQujaAYIg2ZpBgBYEMOJCAaIhTDbiGataGwlR2v+AN2SBx yzQQEngvFJANfuc4CDNABDFVAEMQ/0J8BMMOeJYwqfFN4TROnoNAcjQBkbhOfddtFaAdpTMyl8h9 mVhd/3Bd2bUdPnhIeKEX+5BCMZECfyUQe/IXfMV+KGCE78U0UXh0mfQ0/TCFvvF5AhFSiqFJBEEJ pnR6qbY1QuA+q/AYYyMGBrEHqwc2SjQ2olANz3IMb/8zexaRhrbngNEoYRTXRRBQVRGWNwZEAVBF jhIQRx6HMF80EPDoRovIiBF0ARBkOs7XYqZzaOzEMaljg/4objnGiWtRkAZZSJcmGNRkD8ZzhxH1 F3+gDcqgUcsTH7KoAkCgDOCgDDagNIrRAu7TD1YYktwADtyAi77hGLZYeig5LP2wkizVCAaBBjFJ EMQwk+jTIk8hChfBkxfok0E5caZSlAEkjv4DQAbUZ0pZEOuIRvb0MxAklRNElROQAy7gOSxHKfs4 Gl25OtoGlpYolog3kLJjloeEKrkDhLcRLexHKcqAGzpUJYuVWESXGB7pWD+kGIOpPYt5ksIxA0Qk HI3/NRCUGYYFUYCYeS2ayZmd6YxqiC9sCJR3uHuJkwGGaDhF+Tj2eRCraSrBhUbFhynUJpXyREHZ xg4Q0zmj0XIEQU8ckw27uZVlBJz5KJybmHiduHgtoXPjIYrKCRh9UkOAIYg8A51MI53T2V5AQHQo WhAkmZ21CDWE0l/hOQNNVp5VdxCXmZ4tonXRsQ7xona1xQvlogOEcJ8J8QvqQgE6kAe/EDpIlQhS GqB/iAetuQMDoxAOk6ATMDHKNxBgIRZksQ9RWQEF+nxi0QM1wQ6VSBrgxo8WGpDhl6HjxxD1gAgJ FYSysg898wLAwW7HMxDF8JYosDQs8F2dxzTgsJHR/ykViCkiMjAsWSajAUejWzMDz0MQOEqM6iMJ 6XktOCAKChgppCoRk0IRmXKqEOESivANivYfORETSHqH4ABV+wAOmepXrcg4xcCKKPADelAMoyoQ QlErRsGXS1ME+HYQzMCRiUEJRlEE0iqtS4E8SaEUAsENKVUimUoQpDAD5mlwyCAKugYGi6AK3JBw pbqu7LqudJVINNYQySNJnTGsCtEPo7YR8MAMq8AN9tquABuwAqsRBYUXFAkRkRQYBzWwDNuwDvuw 0QGEBrWsCKENthEYogixGruxHNuxFbEPEss7MxFdewkhCuVI3eqxKruyLLuxQIOWMHsCf5GxLVuz Nj17swHbC8gZswd5sDj7s0AbtP+xD6iwszBLGFAqtEq7tEx7EtngByE7Hg6SdE1btVZ7tRRRaqSW tFhLqgEBACH5BAADAAAALDgACQB6ASkAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq VLhvo8ePIEOKHEmypMmT//Z9W/mNHcN6vfJcqECTpos+yeqh3Mmzp0+N6zr63OetqE6Q3xIR2sH0 l8geNWn2UFivT9SrFSxo7fPtp9evYCUKExSi7B1vELPh0fCgrdsQeLKdhECXrqGQiSTo1Zvo6dWp CBVhHax1q9CwiEXu68a422GPvkBIBrGOIAgGDTIXzJwZhMB1nEPfYbivEAW3qFNTMHRUZF27ePfy 9RsVcMF9eQbrLmyBR+vEwDV2Q0AcQbeQhRgoZ4B24GXOmzl7FvggNGdfCrNRyJy6O+q7rl+D//+Y V3bfkD0m1D6YW/fuwil+B59PcXjx4yCTL28u8DLmBtF1NlAI1mUWQkK+hObdgg+E8NhGr0Ewnkfl 7XUeSOmpJ5VBvbjXgyIgyhQVbzw8SN+JDtlHHH4f6accf//4pxlBoU33jy+FFEJgaAjxUiAGePBS VFG84IFBdxqYiFGEE25U4WzoTSDlhgTtMxNWh8j3zzc+1MTbISiG+ZCKxiG3HHOWKTejc5MJYtA+ 1h3kjXUYYJeQNyGkluRHTMZm3lNSTmmbQIJddYFcCR0yolZaiukoQWSyiJJ/mEUU520YhIaHQ76c 5tZoHvV5EVGPPSnBhR9lKGhBLmCVDENWef9pQR+P1mpQpBMNORGlAEJ0KUE+clYIQvUYEoIh/K3j aVt2IrSPWjpgoIMOvDQqkKi/aFDXHU4ttA8hFOyVQSIdmYrqP+wwpS4hB/2yQw/w9sBuQapKOWg9 WA2a0D6tyqrkRe0EE0w7BK0zSDD/VunLIIP4kvA/wgzyQcMS7ZNLCB9kLIikBXVzBwYIOBACxwJF us8gDij3AckClYbBmQzUaVBkk1Xm3JkFTQaCmwLNWSBnBwqUqYH/FBLagd4s26BQyrpFwb/ZHJka bAcxyY62EUKgQ8K/hCubXhmwY25B33y9w0GJBGqvQfVOoC+6yfSRQwWvNlSol4huFMgBfB//MIhA d/TtwDrd9P03QcE40DffhxfUDgZ9E4eBzQ354kBxmH/w4D4hYF6c5h1jLszLMDc70OMwnwnqQC6i efNyATZgo88/NxA07Q3ohPsD+yjd1p7/ZPPdQXgsWNfWBkVICNZZQwB8Qb98/TUFeXx9btmynW1Q 2mq/3fbbtzmE71W0bhTM4nzn4gv6B+RiOEHrs3/A6i1DHjlxgzdEpucIBD0QyPyT3GPIdDkEpI5j lEqdcobFujPBKIGxm13tiPYPQXBmUylRUJ68478NPgADBjEEgx6wreQ174QQoJ9A6uE16bkQSgPB 3l60VxDuBcp7anPbRq5UExd4JALyAyL6/xTHuIEUTn58M90g0Je5hnwggJhj0SCgWBz67Y84qQPh 6RSYusO07oE4o5F0BoK7AgVtRw0QxkC2w5kR8qJnqDEdC/WEBx205TV5u1bzdGAIPFAgazD6Bx7o IptxJWIHL7ye2dCWQxx2byNQucpG9iE4XwTDfnxzgC+6AYLFNY4DfeMAY0DJtwgQBJODWIfliqNG hawDc4IgWDcAiACetQNzk/vHLDFHsJJ5DgOyTNlyKNeNMzmoZ2fKRQP3kybYiVFALRuSdYpiMzY2 4DBobEBbKOCLbHjwAU8TCFvaQr/iOY0/SSMhXbQ4kOZ16x/1YB5dMNiyuuyFnv+InvQUmf89Rj6S Xo2EJFY2csQDBKJlRDToQITot8/0LQKHwWQrC8rOXFRxIaOTHEGmSJwPCISjITvMPgqIgNXt7zDF XA7P/pGLM1HuH3dQzs6W+aJmKieCB/mVQHjEOus8gD/ftJMvnEYQpb2RIMLDI0GyNq+BsCNrwHqN BDKwvX2SbZHbCyhA/5mRWEWFoH1rFgn6psyPvu8fS0wi4voGqnbkQmLN2kdx2LmQdvQSYiT16D9o 2TiBCGKuRsScCknHABu17jH7MNEXbcoAnBpEp//gDF0TFBoNEKQeqLFsSlDTHG+ghgIHOVJdmvqP rGnpDhHizyBfc9TLWpUgMtQLDQliQyn/zVYg39tIe6LikowUVIp9Y1FBD9dJvj2ob3Q9CEkfsg9f 3IGkxFGmXIvzUl3y0pfFKetABLEcB9CUAQ64g8MSstjX3fSZssspTwey3n+A5mgFMWdbjjLOBxyV F6jxH0HuoE6tLfU1yRUILyL0Th1EqLcF0YD1rtrPrKrttv/IrUYi+VXhBNeIFy7ZWUl5AIMkdCFP JM7DPnMHKsoScweJInZXVJBBhLFoXMSAIKoLY2aat7HotRF6e8Ve6OxYvzdCDaLkyzP5PkADQ0qy Oevy3+PJSVT/yECEEFK9P8EWqzXMIYQlnBEK1wSsfBNuhnV5VvuZsiAf6BuI77MQX1AR/wF2IlOK 2WxdOg/Exc6sMRcL+9Ly9ufFOx3jY9v7DzTCSAPwLdjw/iHCtpxxhN2hS5PpooMni6edU0bbgq/c 4Cw/mG1aRQg7rHUQHn7ZwmHGcKo1XMR/cNggmFwzcWhMEGFQcWWBLc6cWVxnXt/5xa3jogPu6ucY ATqygo4djwVitMystNCQ/QdqQIVfRwvkm5BW56QlZOm6jAeqmrZyDLFMWy2DmqtIJUSreiE+rOQB zAcQ86rJ3OpXF+ShC6HlQkDAPxlXV863UXGvy7RRYJ9pH2MhrHJWV2wI5li9PiajZAnSbM4EMr9w tHYFQ1DfbENg25U2iDegDG6D4GHT4/+WDWgdHKgthxqefbhAoCqQA4d06CrsRnW8Vb1zVjf0H3vj 20vb0Te9GiwQoBsIihVC0jolTOC5FvGKEdBXmC6Hna0jCOqWI5SGH7tGEF/TQBCdmdaW8dnSfkvG G/SQRt8R5N2m2j8M/BqEIFLcAomtXg6yA3Nv9YZVyqF6usKQfvEW3vLuOb1/Hr/5bfSsxT1AKyF2 gI4u5LqnQwAGPiCIjoS4lgUpsUanDmTC6lXPDJCULxzIbNbf2LHKNogwOEMBm9XDOuFcIcb/UW22 G6QeJuKvW0Kux7qsvCCGiFDe6F4XBBcV5XmXHt8l8OmC9B3d/8iD4Gu+kLvVBHwV+S3/zxPfuIQG w6F9s5n7+Hb6NEc36gj4n50rWBzv3qj+lHvlRaeOAMoJ40yN0zoMJBCrZ2Nel2eBBk2xZxBoBDxm xDqowTNutzpl4Smt1TJKQ1qAZBDyBAGtkXysJXKvlXKy4XwCcXctZxDXB3iwJXgTUD4IkQyDQXg6 l3jkd2eLwwEcdgCnR0lFNwj2Qxx3BXAwVX8bIwydUxw8M1L1t0mrVBxD+EvH0Q2XM0zfxQBltXU1 hXpghIDIpoA7dhCYJVlo8TMYUAhG9gB2InwPMB4dl1xp+FJZQ3wCkQ0RQlUDYYevkQEPogMjGH1f g08CcQF7ISXn8g8ruDZ/1z1aUhWD/wF+4Tdm4udzfYVJQ/RSacU+VAcpS/cPt/RmDnAYtvZmz3ZF nqMyBMFdqZNA58WFjFUQ/5FegxZxBaEsE+RTqSEUy9IsQzVtOlEPbNgWydU8dyAU2gFlAiFlr5EH h3Fyf7glLvROvCcbhqiCLycQ7OCC9pIIiQAiXhYVF0Bq9SGJ5Nhq9cM++VMQltg3OjZw8PNmHCN6 AYQBA4Q5IIU56fhnMrVnDOd6+tiKAhGL7ZiAYleL1lQgBxmBdYgav9FxIxRIKBQtWZN7AwGCr0EB eJAHf+RC/CQ9O/ALaiE9E0CDA5GIOmQQvKCNGuIeNGGCGbEYjCFSjSFSDDMIJJMLQv8UAYPwLygj OFXnXhlDHAWRUb9Ea7kAXcTReaFzH27mOaazD2fiC5aTRV7kj8bmhQIZdsv2e9mkKRXnFsDjQZo1 EE0DaYJYWq8BLigEARc4EMoYkdD3D97wNRnQQi90AXx3jQPRByrJkhdAkrbiSoxRHzWZC7R2OheT MYNwV1XSDTUpSyEWAtXVDjlSCHdAMOuQQMUIPzrzUg43EGoiiwuoEEiIezphQdyhATazDotWML6T GmhXfHahLCd0ltj4RyfEC4YQl3OZPfr0QqeSl9hHEMnQl4ORA+IYmMpZEe0QkyiRZPzBOWURAgMY TcJQCOO1QjmSRx2nJPuQhr8TSJj/5m3uhQFZ0yQFcTXuxGgQgHdyuUhd80IwaH1+Ryza54JX4QJ1 s5z82Z8McQehYToQYWS2ORBEYQiGICQjhhC/cAfTwhqkwQtYg5FH4Q0IeqGBlC7qsgPzUg/OuBcU cIglWZ8JUQ+80Dbq4QKEkEf+2aIuOhBjeB0SYWQU+aLi8wvcCJgfoRIrkZw2+qOBGSxA46M945AC CqRImqRKChYAah13MHlv4gsEkhoFuqRWeqVY+hFNakbUWZkch4sPUKVZOqZkWqYOIaS3+DPgdKRm 2qZu+qYw2pVpaiBECqd2eqdJug78NacyVqd4+qeA+qLewAtkMZ1lUQjVEqi1EhAAACH5BAADAAAA LFIACABgASsAAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixosWLGB3uGxaoY0dc7TKKHEmypMmT KFOqJDmsZbCOIRXu+jCgpk2bCkjEXMmzp8+fQIM+9Nhx18mbNYclHBYBqVObOoVKnUr15EZggXYN 23lSHYevHEyURMrhKFKlB3c9XVvTgLqqcOPy3Ii2HS4OBQp8QLtwV1OnBka8NTnsZlmSZM3e5EuQ BNvHBozKnUz5oNevYgUWrnlY4E2BwJxKRghMwWPOXDNu5jzWsGKbjAWqPf04duXbEVfbnri6c2+C n/+pc1pgH8JAtG1GZukacfPWiwvuM7A2Z8cP1J8aMI67O0Tdqm36/xYP3ObAp7tHJEc6GuPqAZ1F JjbpNLZjpxFsM30a37v/pbCFx5pm5J1nnkC4BGLCTYEYFNpNCgQyDHft7KIeeyK91x9G80EX4ED7 PEWCQvchldp/KA4EnnsF/vPbQGBt+NcADRK0TwE2FYBLQvvQpNyJvD0nn5Aj1UcQLvgx5ONNI6bo pIofnvQiQxzYVONAyNVUwGAyEYkQdwC22A4wwHC5EEcmBAKMgS0OpE5LLZ1IF5xmenYWQUtGyWN2 N4H5JIorOlTnmW0qVGVNV/5zI2xzDhbIVzvKdlN7Be1y6ACBDeqia+1cOoACaybUKVIKvNUhgQwa 9B58Bhk5UDAmzP8YgUMLIhXMnwgNo6lA6gCzG0LteISLn26OACmxuu0zQgEKjECsooGYpqWzBF0W FpQDCgTWAFiyJWlNYl1aVq01RcAduQoctI+nk6pqmDp83hSpQfCutWp/qyaKaqH/uKpqILc2NBxS mcllggAFGLUuwrp+1R4uBQggQKnScSAxwrsSdPDFCFOaJU5mrgbMjAOYWxDJNpm873jZ9nvgPx87 JdCSIZFbwKolGzedTaGCiDKGBL0XgbRP9QxivEghjS9S+m7qpb8XJSlXIBxjdXHCEl9JNcdbEuQB xwg/SxAwYEtcwE6zkQrmaj8X/A+Sa42ALasrl1dTt2sJhOMAHwj/FHOeVn47gNwEXfhYyOthSiy5 yS2dakH3tnpnRuxyK5cCHCsQ8dVZC9RO2QJ09nnZhCOEOeiZLfpUwTibCONj3E05pct3++1tiDVF 2jpSZyvKJ5jtkBWI4S23PoKCSM/7T/Bk+Voikfm6+/TkGFUu1+gFBPK12btsL0CNI0gcgdUSD7Zx fuFLLLZwF4/QUgTi216Ts8DsXdy+g+/Tzozz7j0AWoaTjOzaFJzlvc8m7lPKigZ2k70wDnw8Gwjj Slcvm3AJZ6NhYLmOhJS+DSRthYoe5E5lp+hkJGY1WR9QhiExwp0uMxb7nt4kFpPtwVBioTqd0YIW sQKo6GICkVZn/9ImwBzFziYepF18cBQB3bVodgV8HaLmthNSSRAnoLFJwYiWLoLEjHUdLAgKwcQu YrHLcYEb4fRMiBEU/i8uLJThPzZWo601KI6+kdhhdmGCzthRIfsYzP6A+LmaGE1ahFtNEv8hrVmV MD6pGWDLoqitNDrNcgIhWcFU90Yleu5xA2Fetla1Q1EmZSDxWqTgWnbJKaqRX1CziBt/tcLOwcyW cWzQLmwpECAeBBcS88BC9tE9jpWFhSnE04BWk6glsQk+uxCbJOlWQkxKkUZzI4inmpnGGeHPNvGa WzILEq95Mc0gpqQm/rD5SlbSTk8WYVxNMvaTXIIGl53740B8qf8qPSokEJvj2I6AKQBrwuxAq2nP x56ZsmEF7YkEfNk1rxSomCUKbnQznHEwOgBcwAlOJBOnQSuZRg12siAkFOFD1wjPilgPjviUoz23 xpgY5sqfCEkf2Ey2NYMu9JKM+ek7eXdBiE5SoiRlp6JsMhoQJopt8nujG2uDPwMcZJvr3E1Kz9lO dVbzlDx6yM/kYk8XxbRBW1Pe5m4aOoTsknTc6akYEaonoT6md5dkmTop+Y9LJQqR4lwk7mr3MaVM lS1o0dBVH7cqrUKPqyuFJfWqZYKcPMQpXYRLWTfbubcmip8FIeiGBKLTiQWCK2Qr6Fw/ta/2kItN HLCLJutG22r/GsSvhdMSiCCE0gOlzbCJ6+R7MqtNxk6WoWh0JQdZClbPRQuLAnNKkzR7Vs10Lo7C 5FX82uGBr2CJlwWJYQS4dMGLceVQh2FmcWvnySzWpIvTjA9fcTuQBw1gNP4bAFeCY19arrcmMVnV YtOYTseGELJ4kywb//Ez/w7keTWh1FQ4K1Nb9jCuLVye2QYCPwFEqh0tGUwMrzS68f7jYvMabGZm t7fOtMmbeZ2bfJHaV0sG8b3cwSqvglPYhhANk6t6VjkZKuF0JlepCXYn1DjqToPszHUwrbCUwRfM jWxOMqfb0VsFEJOtHWZ72f2HTo2zPQXENYKtjEnaStcnDtN1/5QRZe9EK4VA0t4ErzGLKloUxIGh FcSUjmzlAEpJvR9P94NbbaBBUHjor55UOE+RcEEAx7fJULhGFAabD/0GOj/ilKACiEAgOiyA7Ka2 ZMMzIv7GVz+mPjMCIQFhbaFIY/oSZEZyk6cCdsHRwzgzkwv+okj7M8aB5Im4SWXlqpA9RwQ7OjaV MwAtIdxc6k7ZunKcY9l61o6AXowvXhbIjUAnAL5Y7CkUxQlxRCq1+NptpLYOpf80R5vMSMuqCLqJ ykA4aHZn8FT8ThS/vYoz5THS2UN9tKCthKyfebUqwZIQrxw2cQ60R6cJqxTYEhXue5bNbd0uqL4j O/B52bdyHf+ddZzhbeP6Ble/y2vRk9/bZyuye3B8TJ6NnBKIfexjqkfGVMDe5hSDJ9w2lBZPRzjw 45tsB1cIUUcgQHKQdhjLA7HhSFaCRupd0+vHJvCTbkBYumbfjXglk7Han3nblqsovzZh8uDyrVyi n8Zow30Ms9F+mqCXq+ZOGVQsfffyBUOdJxNSCEeo7uSWGGcYH+CAvnbxEb+1GEzWAuNR5ZzUpoUS 7bMCocqIVqekt1xDckezjZBmmESn7DTMPrplWJ8cSR/+9mdSjW3eBCfnVj6UCQoLd4DxlZ4LLvZ8 z530WJN8o68zZYNVNtOoLa+DDJ5XtGeLW3DPff8QbYcM4aTK5100gqYogAOM/7NHPpCZQPBpOUtB mslcP0XqV9r6x7WR6aULpO77Hy4Y1TUaMSP3YxWU52Di9igUpxlwAgyUEnEdYQKSsQtIM36ypxDq QALZlxP9938eSBVEczMNsT+g9IFjUxQqVC2OJyiU5xG7QE8mGIMrhBQj0IE/l18qI4M6uIM8uBBy J2q+AieB8AFwJ4A9eIRI2IOpRxtGmIRO+IQe2GqJE1tQWIVWyH3Kkhxed4Vc2IV/Yhco1yzg54Vk WIbd0ShmyH0BAQAh+QQAAwAAACxxAAcAMAEsAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaJE YCI2AACwYcOtdhZDihxJsqTJkyhTNgQGqCUgkAhvEdhIs+YGmCpz6tzJsydPfcOCDtM3UiPNYQf1 dajJlCYBXT6jSp1KNaI6oUQrDquJVKTRjV0Lfm3aFGrVs2jTEtSnC9AGQLfUkfwaduLWo0W5GhRB tu9Gs2oDC4YYVG47ETM3ZD0IaCbTDXJD0rV4F2xevASB+fVLYPHgz2fVdTQLaCMggXc3/NNMU7VB fWPLSsZMsTKAuhXH4k5ANkGHjH1FgB5eUfRtiXdP/ysNQHnqf7YBRCa4YPNfi5O16vW6XSDrmgSA rf9lzhQ38fML75pnmFwgc+cbXTO9VZA8zepN1zvMXrs7dv98gYcTQdEBIBx6CKZnWUTtLWcaavEJ VIIujiknUDs1dRBWO4055RlE/NnlX27+OUabQbcwRUCCLCKkHnIPOticQKJtUAJBRln4T4AAALYW fjNOFCKMJ5JIW3SuJQTkdS02CeFxIb2nUI4EOXYjQvrg1xlC7QT1oUCTcfjWgAXpAwhvCyBlW11t uVRQjR1dOZBuA+nClHgK2VnTgU62+GKUMSJEpXcbJQBUUP/AlkAJRKlDk48C6cMjAXLOeZQ6JhIw 3Y9M6bImjjUVZFuSYI4ITAm8fVkQhjb1qdKmSbX/Bas+t0xIIFg1wgoMbwAsMF2NpMWoTnWuxXZc CX9Vpg6PrgW4QJlLbsRnqX+ZuBEBZP5jbHP+jSVqq6AWOVC2B0XrakLAbCCeLht4CkhXsAWg2EBZ BhAeQpjSRF+kQPJ5FzCOYTtQdFtCF6OUBnNErV5GAfVop/+wCsCAS5GF58LWtlaQntbV5e2tGoe7 IEWxwXpuogTY207KlAag3AYBxMwnIDHbqyrMAdAEk31QpranpUxd2SDCz2mb3z8RIr1RtAkIVDFg jvbVNNCbDRhtXx6HCnLSVENJEc/69QlMzTjb6/I/6tQcM0wp17wvQe3UrG+iTblWIAArCtTbk8oR /520sUPFuJl4KQLQwUA8JgAIjz12TcAtwCwpZ9T6tlN4t1oPDG7XYTcE9sn1BbBABzEvIELMp5Vg b2Nnpx3ALQvIa5AuMUPO2+F6ijAMfiBV9hGvSLFqqNETJ9x3jEVfhZ/uDjf+z5K3cCyc8AMFnBV5 fI61rz4mPivQ5UH+A77XxG/0bcicW8QzpCfTDAz3rz9/NsxQ0awa7c+OnTdBt4junsJ8mRprxHOX qRWOPg3SjK+M978gFY1a8IHSV7zHnLzxqlE0kZM+nEK1qX0vcxXDm2eslTWanI9rCyOfRManI9CR DikwQ4rqThOzRtkLbSXYV8zwlSjeqKY6cnrQXf8OFLXTNEgfixka8lA4qD8hK0YSk4tRkPKdEgIg K1+ZFuWKVz5S7QhzJtyawkSmwojwrIUni6G2AoAUmtFwfzssSMzWYybHHC5QGlFNg5R2uMqIgExK dCATlwgl8lgIP/W7Dnk880QJ0qSF2zFRC+1jRQCccIzpqwjP3ga6NbaRjctxWdqSFEeCzNEgmMrZ dUaWRwbqTWHR6cB0AhlBUjWRSRyzUIBOU7jTkEcoQeFRV4bEKyjVhJMJG1n5LClGL9JJk+Xp5JxA SbNPvkt2AinlQE4Jt7blbEushOVGLhahu+GJlk+yJRQJGT7m9PFB24JY+XDzFbOM6FNdu6QzRxT/ kUYqE3RqrGYoATHKbQbAINwcCM1qloDIhFOP4xxIOffmSr9hkngW2sjh0JbBgRQOojOKZ01eVqSv KOeeYDRfM8XCT7Z4cErRlKYnQ2nNf9wwmweVIyhxFDPFEYRJRgNpRsXZnHTRhIAHI6Q6w6eR/aHv OXc5nEgfuTB6PuqV/8RnCvXJ0hO1owSO6ZxAiqlSmQaUmmerIdp2qDodBuBDMNuoPiIzEwvxRjh7 3MiN0InOhC3VQszBU8A0R1TXdAmYwcQMMTFTk4s9SZkfIywKlxkWjm0EmahkivfMitaa0k98slPd jcaW07bA8Gziw5vRNsoqI2qUb64cYkWVGi4L/0XtQF+JDHOEqpBfLgyZkaQqQShJRq6SMSzR2WxM mDKtTp61pqpLgEwCcCPaEWAYMCvW/AKw0eo8izkgCWzCtvREpPbqSe8MkkX/ShBeSZEmBwoQb/XB kg74KLcLq5TEpJPfgvizksbNJFbFRS+yOo+zn6xp3NQWPLXFb42+7GkCcnajqC2KJkTxI4U20ru5 Vcy16qUt0HRUuAXA5pjfEY6eTiOxJG0wjOV7qWUHEkLlPi+l5BtVV5UZwqUlhGcFQzBNByqQ08Us SWULAExgxmIH8/fGP0sYWad2NwAgMKmCvOigBsKrBGTsmDIySzF3hr5nlm+z9sFJdCrJScvu8/9E lpXWQeJsIJkepEtEsRy8sruYVAYAMEyWkNrkZBuBJcyyx+sVU+TS1wdi9JJ+eS+UGqk4xr1tLJr6 YkcfO8YsxTSFQR7Lm//5ZciMq8c0MZmdJUJfWLUDJ255y8Zm0lDCDuOJJi7yRrgXskYPMnwD8adG azI1x2Rlv01ZzFSVOWVUHa1rvQLJ+CpF2fpIbQNf1uuq1QIUhdSqz4hShw+zAqwG1rK2B/FnAlZ2 1NUUiiCoFu7CGHcfa5OFhGTcDDLNzGXrNCXI2w74Qq6yqTZ1BRDACMuyFrBAgD1F13Wm19VyTbXd PZte2QZfJUVKJn7TyN/gUbXARx4Ro7Dvzle/hdtYRADXS1mL2oRiyrtwzO66GcTjAqGzX05O8p47 pHAAR0jFgn6hoJCLXo3SSAJ4/o8Na1ury2z6v02G85xnm9hi9bnWk+IYL84OvlKxHEGTQpCruAk6 xcz0zfk5Lno7hVFbjztEGjmvg4BP5AhiiWMPcpWhLIQtJeiIjXShKrkbnutOGXukdLGk5h7+8ZAP yXf8PbzIW/7yE9H51DHP+c43RPM0qbXnR0/6VcUbAD4tvepXT1+X3CLrq0dLQAAAIfkEAAMAAAAs kwAGAOkALQAACP8A/wkcSLCgwYMIEypcyLChw4cQIy7UB2gBgAQi2kncyLGjx48gQ4qMqG/YMGAa CbZLAKBlSwLqRsqcSbOmzZsEh7kcRlCfRZcuYeIcSrSoUYe6NhAA9FBnS54DAQGduuCo1atYmwLq 4FAqAKYOnQKA+q/d1LO3sqpdC7Jdhw0iYnZtOfdr050DS5ydmoCt378DTf4TAaBEQXUEgspl6LUu 2IZiybLcCxQY4MtFNxiWypOuy5T/9E0Oqq9hY9MtHzOMLFAd0AUa9XUAKgKzbY4lDCsEsOEf5390 J+uKurc2Y7qo7YbF++9WUND/NgS9TR3iht67e/+mK135v8kElH7/Pg7A8d2nAgmnLmjW5eLq8BFe X8jb91jg5YHNBguspXF96qW10GnkqbYQa//8BAB0As3WkoDxRVjQfNnZx9MGXDWnnF5VEWRRhwoR iJA6GnllYEElpYSgSyASpItLxkkoY3TYHUeWQDqBJZ1lObUEnT633NiYLgucSBhMJgpEpHfdgYWg CInFSJBrLdU4Y4QU2lhQjqUBQEA7w7QDDAGWscRjWYkBMJxAXol15j8vtpRAkvYxud4/CIYGCIQF sXjlZWAORFFK1+lX2j+IkdngZvclVidvZokgVUUX2afbPw56eahX3VU60GgA/AQWndHdmedCo/1J ky5imlRabq0R/8CnPonpRliH17EkYHd9AafdfXR5xZtOt0zqEjCuYdeeSwIKC5RcVJ416p2lKneq Qp2qKpM+hS1g0TBUxkRYr0q+VJZ70aXZG7fo1rddecJu8OIwzhYGHAECOfcam3sJqK+0/NppLXMM dcqgth3ppOAw+jL102J6taROnHZ1Wp5YavpqIX6PbiCVOv3tK11ps8k6WcBkOpihypi6NK3AThK8 UKc3ItzRLQSwJN0wHXjLFQCEnblBAvPqpUt4pd4inTo5usaUu8CW145zcUmFp5z6DnYfS4aFzJNX tbXX4cPn3klqkzjKrFCmNdu80VbOmTWMvEpz247HA+E91nw9l/+qz7w68SSrxu+mzZTVTjHFEr1R Q/VgnTz+JJC5Ak328mNoX41ecve57REggMwNXOA6AYipau24Nvfh5Sl1tUn3HQp1Z+VdzTqi6AXd HyDsHmoR6wumh1yVeZtNbebXJqRe555zBLroYwFQUu2+qYZY9Ew5RyPuoYcK2uwc227f5PdNmqNT xQNP3ILtZVjn5cUPvHnBajcP0fO9RT95VDW2k6ZZTNHJ9oDTPS857le0M9z48MOT3Z3vKSaxyK+o 16bErQ9+AkFe/eSzQfuZJnT5EyBw+JcXORHwagP8ilgI0CUEhi9H9unSfXTSAbOUAGMumeD6YOcd Op3NVB00iMH/PPg2EI6udhSsUXcsYxcBUkiFQBkO+JADw/7whCXD0Un+NoBD4hGogtTy4fGAOD88 rUmILiFiEaFXOgGWBhCX8tKamti6dUFxSbWZYu1gqJPhSCeA9RnWXnQYMB4+RowwS9v8pHKpPqVR jRHB3xFh58THZOyKt9tAVfoYOG5tcWNUtAu3DCMdw2jRVyUxSQShRkEIhtF4idRc535iJUH5CZL3 M+LedHGLBQiwSOowTKMAAZd/6KVUrwvc9vSowH8QoCrS6c0p6zMhoNVpfeqg0iFhiTkydm46BhFL LXE5IF0OQwQLSMAGRqkmARKgBK7RRQf6soDeSGdqYyFWgj5Z/zjxtawdesFXf/LHFXrJ5Y912tTw qKk15fxQfp3r1HvyBSNyPkSSY2mYMyXmxJ04hyVckc48pfciXwbShaEEi3NA96DZiACGLeHRetqU wYUqEZbu0+DmMnUiBZ3RogvRhS7Y2J6YlAyFEcNXtNIiHi896qSg3KNyzPLMqXTPYfbyWp0ElJhe nYx8DiVeTSEKlX+RS5E+AqpE9PFG3cDQNbiz5nfSep3EcEUqoiJc1JqZoL0I1S4lA8ZPSmTCOGFn if8IWVhbIjtvQiVa3hENONUKkkMRBBgiOFR/BJQbwgxHL/piIkql+hiKjUYdUrHMvygnrAWkSTcR 86WCXkbHmP+ilSxpaskNgQEqKVHWKkBqzTB8kiHNRJWv1SoBS/oyG54syz8oq4xAFGvVgOk2t1DJ 0/IoA4CJ/hY+gilL6PAUE9mM5UVpYcmhLAYVsJFGIOxyieWiOxUVEayLfPmu5yxiEI1QdSDXs1ch KzqQTC0Fltt16m0JYrGztE2/V5rNTwfiHCuhlk9TY8qRLCtLli4WENuN0anwK1YII6zCB2HJiRSC EoMcraBwXJOJ/HdftUWMKhw28Z+oxKc6efcmR8sYgLvTthvL6WA6vtJPIKQvfEmoHcQswYSTrCrT Ds1lVM5yVmi1ly9p+ctWoS6zwExmo1AMumVO81B4hqE3qZkDJgEBACH5BAADAAAALLYABQCOAC4A AAj/AP8JHEiwoMGDCBMqXChQnT6GECNKnEixosWJCURc3Mixo8ePAnWpUwcgAciTKFN2fCgQ0DBd AAC0U0mzps2CLge6BBRz2M2fQDmW0Omz5TARMW8FXcoU4a2i/zYQJbohJqCmWJe2G7pgqECpRqku IOA1q1mV6gABkgoAbNSpRgnoEuH2rF2OugQOU5ugXcmBbnMaBaDuVt27iCle/beX5zACAADD/ecy 8rDDiTMzXNxYxMsOksMOZmxSs+nNegHpUr23KNh2OfXBfvxPX+TTuBEupkz5KrBhDjdcXXu58VGB t3Mr18kcUAl1JYZF30AgaoLiaofN/Jd8OW7ZLp8D/zK8YUEHYMKrtquKXTB375r1qRsG7J8IEWo3 rF5LN/9aAMP0tIFxA3UHn12AdJBgVMJ1IJx/G+AHAF0ACkggcgcmtlYJUi2wgYMPrrWWcB5uMKCH 7UFlYIZZ3YKURl1tUAJ+apWAXglqOajLZR2kWCCLd62GX1Rr7adWeEcSBwh+PmII5FmNKYXjgDtl p9Z+VGaXpYpPQpndPwoO6NmRez2V3zAKurTlj11mRWB6jzW20zBHcXiZlhe+1yZWbxIHwC1kjheg iXeqmeeKe/5EYJgBJmlcWwM+mCJLiCZqU2P1AXqio0dCWmiKeelpaVBy/gMMcTgmqeBTdkq6ZWmV jv6q0l4K6gJnkv75RJyrjzopq6I84ZcerrmmNWCqKUbm169ANSZcAg72R2YCWWZpaHaWLcDsT4Ul OCKFjra1F12fXVvZfJhtOyswunSgIFLh6lfidAMSYNx1a6m7lDq66HILAEnaJhyk9i6wQICAqlmC g/o21c6OR/5DwLDs9dSWllY1bFY72t2i6X/DJFAhwC51kLHGZl2lz5K2RkbdYyTvFVOoKGN1VVrA tGMYg5cB6NK/ANac1VV0DqROb5fZ61KAALAkNFOA6LNjQSyps8HKw9im7dNNAQJMdAkd3c5DwnHd FDAJELAdQ06bTWpMbiunddzKZUR3bl7fLVBAAAAh+QQAAwAAACyzAAUATAAuAAAI/wD/CfyXbt7A gwgTKlzIsKHDhrGsWLH1sKLFixgJSpSIT+C8WOkyihzpkNNGK6AEppu4sB/Jlxb7nbTyRSVLhbas wNzJcNxMKwZXUsSpUyEdgzxHRpwpTePQhDkXVkGnsN+mV0kZ2pH45YtEWE4XRlU4VeGrJUusCbRG BV/HrBK99OuHxYqdsESlUk3YBG0kgZiUzBo8y1o8mDKtNP0Hy4oXvFCLJiyLcBzaJUpcqhFMeNY5 hKYwrrTydjRkhGMn7z14lgoVJVQ3d/aMMA1Gn1gGJj59MDVCygfnUOmHT/A/NbNpH7R9MefdgXXT Cf03b7XAqNYFAh+4BJrAT1jVoP8bZ43w5+UYc3I6aAdOv+lbBdq5mxNdFWwC+3nBV7af93/9LHHY P9bMcdxegynEnEU5PfUPfmHF9898/+QEShXr/SNNFbCUBUta/6DTRD9t4FMgPuIJlGBCC1YEyk0I ocOShBTSYoUbVVQhEB1V8EhVF0ts8s84c1izxCuzCKYEcoRVY885SNjzjym2xQPPP1I2tJWDA8lI EY132ZhjFQZdMSY6+KDVxT+0fPLJEmUkmSSTg7FyDitGOEmDGP9QQsk/OCAjECXw2GNMP+AUuqVC Xk5YVI1jlhUpOuhcxiYtc2A2yxxzdmZnGkbYSQMN/0CBQz8x/PnPDcYwAwQ4QOj/UcxWi8U446Nh YohNFbTYt4mPtBy5BDqfsKWEYJwu6ek5oDbCyqj/xBDDOTGgIRAMqaSyAjgq/JDKVtkJ1CiNdLBZ hTT89VrFONBMRUsb/ww7R6WfIItPGeURZicU1aTByiU02COGGMhQYm0/QvBRBBDa2NDCt1aEG+Kt O5ZLi6TqUjrVJ+W2QWSl/8A2RzziLVsGs/ueQ8kqLP8JzipF8JHtzOAySvE/dFgsKSz2hTgVHbT8 MwemtDQRMjrzlqzvZygzew7Lq5Di0svZapMKOKmgshWEtn5ZVM7mVnwxgD8HPfS8BopMMjrL/sNK Gmk4DfUMU6/yz9V4aw3jQeN+/62z2Dr+8/Mn6LRBCxVIH63GgcueYwTccnOzSgx2g8PM3VhjrTeX 4t4M9tg4Ax34z5cFmzhsiytd5zmXPB533KucQ6214ICDed6LDjRO5xTR4XfYoYNOOlqmp41O6mwv DSrksMuOxgz/gGPM7Zq/6KAduzfqe8XA5yw8OnSULm/I8TDB+NJGNML807GfA0P0qfSDt+Y5gTWQ F1jgI2PQ24fevegCGRYdCIcmecVDCf8wn+pYYSckMOsSclsFN/pBu5kxI2/OOYhEqmMF/gXucx8E YLyQFrQAIg0dSkDR+WbBQKf5K4KkYAYamGGMVCgsW/S70UDwIZGJeZAqbtCZQf8GuKt/xENeQRtH gJA2DtStsIViQBk3aMCslZFCCBIUQhGKYIPaZU1GkgGjD//BCUnpjCq8so/+5CWkJoyjCeigwis4 80Q7GYFKbyPVDGZALSyCYwWj0JYXUQFGpNjoMfszFxrPKLiMWQYd7xrhvI6lBCqoRWkMtOPjqgEt aaEKDasAxw1SwYwi1E4ZyvjHVwTiBiuUyz5Buxg6+tEjc9FiHmmsAjQ+BMklFC9JlIxN8jJ5DihA IW40gMI/4AaoGMKDUP243EHqgoV5YEMiKYGlubAxjlpezA0XwwYtr3CFYRkJLUJD4bHMdz5ipkF9 /ZhBaJAhKG5kiSG+20iOmqLyzW/iSGdnEtwSykkptBhtXk2IhBL+0k5WVCMez6gG00RysUiVpZ9j ugJAc+SSNiwhfFTxyz8+MYtIsAVN/bCGPVaaFepYNHDa3FWOQLiJKlzhO74c1j82AaLBvOVALUUI FiKVIW3ap0cgbNcnBGKZeNCiI/F4hUs2dZApSCwpFxoThLQpOF6BDRt0wMcVVqMWRhlNIPg4QlAR QpccPUZcvBLIhfAxj5/+w64MOeDuCMTOtQ4EG1jwAlIAtJp+DHYkSjBQP6awOL86diFlUEIZpqCE 0Dz2sqyh5BH2ilnMHnCdnQ3tcY41C9F2Nh6MdYljAwIAIfkEAAMAAAAscQAFALIALgAACP8A/wkc SLCgwYMIEypcyLChw4cQI0p8iC9atFrS5k3cyLGjx48gIc7TZKWkSU0aQ6pcybJlyHFcTMq0wiUl wXRWsmSx47Knz58f580cigVfQZwleU6MZacTNqBQo3Lsx2boUDhHTSqVaEfn1oe2whqVSpalK6tW nw5EauUrxK47JerMkm5iulB2OGHrV7YvPrRWv9zUuhGu24Zz60YMNROOzYHzvLTthw8dur4go83k Ii1dumgxZSr+x/awQ8NydY52yJgoX4J2TM6zVVIgnSq0/s2jQwfzw9Al67wWOA+4lVhrCU9EHTEx RNpoORWU+Q+6bdz/0FWp4vDVnLJCTdb/NDhOpmCBpQt7TU2Xokwsdr6IHoiOuvV/t3Nr595wzpKy mpnkCkJwyPRaesut15xqD4FikjRrFWgFKPSVZMs41dWGH3b7OeRfWSSZNJZB0sxHmnJcKfjPiAs5 11A/WJSk1kD9SGbFa/VZcdk/2PB2nX7befgfWTKxkdBfJcGhGIICUQeZHVDOiBo2WmTh2EHS5GWU i2tJw6JA2JREIXklYZidhgblJ9GHUvUj04AJeQELi0z+4yR6JtkykGHjzGXlcAJJM9cX/XDZT2wy FsRJSXzFYgWEnuEjGSwC5YiQmhGxGVWOJUUTUZ13nmjhnl594WcWeg6Ez6mhcOmoTGYK/xQjhWEy amGJPCGa1D+0WOHFj7rRsclAsFSxBKUDQTNHPJr2Aw00BOEzzpcc1VrmpyjaadJgowoE16k6aUFQ LKdWyeCKQ50nKobyiWlheP/o2havQW4IJH/YbLfEEjuis+8cms6hhBKzCNQPE0ccsSNBphhhykDV IFGNQOfYg8zEppzzT4AlLewQqNsm1228M50aq6l+mvjqTIqVaIVuMkmIYW3y9kZLvWp2+I8b+i7x iUCf7LsEFUOiM7ASTPD1ihIJQ1KQPUcYYYQ9/9gjNRJ80XAJDTOcQwMUG8vkcUMgoymqFamSbNJe i3YbnhVfjLOyFYq1C4c0EiL3j4M8wf9iVV1u6FgzvfzlXG/PS/T2TxNC7wv00UpY848aTCdc0CxR GzHxM1Jr/g8NSNBAgxg0xAAPxzpiu+tAobKVtq6hCITkvDyaZKaEdKNbklFIKRWbnjLrells6Mzj cvGEA9uhdl046zg++6LziuP/UEEwJkpg8g/S45ShMEFqHNHww2kYcYn5n9PQiOhpxHAO6oCSnW3r ee5p+0Bti5uhFfr/43LuvRtIu5pkhZlN6B/l0RDxzvQygdyscBwKEjqu8LN/OM5fXVgR9ZRAhX/0 Qwll2J4a/mGN7w0ECmn4RxlSiIRG/CMNYvhcDEf3jxhwA3VjY0jZGoinkelqONBpYGv/tsKWukAn bW3jS0k8c63ZCWRRl7GUA3EWQf54UCAXXMKwLPgfo0VCIGVQwvam0I8yFuQIrPiHKSZmhDSyggaf SyMNHhaDVeBQdbQjoNlcZz+zJbCBiEqbm5a4v7RBJx3wSuBrQrZAKSbPXtmpl+zo4DhaLCE3/2iD GI1WsMmJEWFTyCEaB2I1DCEDjjRIoxjSWMc7QmSH3EJbH7EistwFkiAmqYuDHuWZdOySiS+7j7Z8 lzpHPlB5koRF43h1SYEILDsEEwj2JpewI0iOIKOkmBE05rU4vnAVNbSj2PD4Ffr5cHU9tOXItKVO tDARCxmi5TC9VUwrWPGYkNSZMpdp/0lMPnMW0fwHQNFRwoQlDZtp1CY3UZnGNICzjv97lELs8CVY 1vJ16DxbXW7JOkLKi2U44QnfKrU6DdXnnlS8lweFxrj/9NOZYhxHQAHKF0xUM1b/yOY/zrHNnTL0 m+HklBU8hRAkgWI4Fk0nRvOoUbWljZ0bBQwTc0W7HOnpL/CMJEohqNJx7GsT0HNpM//xTE4KhHID mQXCOimQNl6xlP84pTcdGs5BlsQTCfkjFsyU1LMt9StFdCouPVqSzvQyUiElmVKOWDvF6eyRhuOO JRXnOGiM1XrQfMVZxYiPeGTnCGz9h1tZgQTRuvGndK0jO2mSEL+ZZEd9/d9SeXg2ev/KsqO5cy1O k0NVpewSQg7C5GPxGVlmYjKL39meGOOhhOQyIZRH0F4/QGuPWWgsCSlMA9ha+A8xpDCVQFVtJsZ5 EBsxiqQZDVUQZ0sQaz2xJNJJpxFHBgtb1AUnbtibFbIaIx0NMiXDTalWjYvALDYBgQMTyMD6YbQR HoGMJbQuaF+oOSNk13xam+tDwemMNx1EqL9CL1PVWz/bWsEmQRQIdORprbrUKr7sFNX+pBFEdNAm qwOeIlcjKdYu4MM/Q9rXKzQpRhVykAlKeMY/plDNI4zjHKNkRefcaATRTQy8qQXn2zpmkMCZBFkM HLFs8Fditd32HxJSyv/G0jYAmoT/LwnkiaUiqpWSYDLHkI2gWBs3pDYsYWBNKPLSjuZZUzS5H1BO Yzw651mrgU4gWH4oMgRSFZNg4TG7vJ+Iv4I7tdj1zLryAl/Ygiy2SIctuWOnkiSErI4JdSgjCvCO /dVFlvrZs7P4MxWeuSIkK2GEK6rmwxItkPNdAmJiMFPFENLhmYAiLOYtCY7D/BVd+VYms7WCXjo9 kP76imXvHUpKEuVted0Zz8TlEPW6IGT/XAYfgbbGHEIoEGsgbUTjUENoCaIxifTDOIA5M7UJ0mYr wAF35wTMcDJdEvMuaSghJhmFdukFa+WXILIGVjx8hMAmtIEy6BgLOqDlm384owoB/5c2izj1lSDG rMyIskO0tR3LwuZyIAgv4EAc9KsaFbAfbpCT7JCHD1rcuTKPKflG5IDygD914JBJC8yTYi1CwsYk or657Mw7JjCVJCXU+gcnqgBjpbcEH1houlXKvumCzNwWnPqrmcFMowJdmjSeAVQ/sAH3ghj1SNuB kNl7Mg+erT1+UI+6SfI7DyjZYUZ8x4ZG+gEKOzz9Joh3iI2Sjr/thH3wIekHLNKO9RkVpPGWNz1x 7OAGWGQeM651A+LzVYWLg94nDEbHODh/+43MzgsLw8fYt6P63hv/+AbJdBWwQAeebacKEUe+9KcP I3s+//pVyOH0t3/7eWD/+sXnvhn4Bx8Z7F8h/ONPv9KxAQo6cEIar1e/QgICACH5BAADAAAALEAA BgAGAS0AAAj/AP8JHEiwoMGDCBMqXMiwocOHECNKnEixokWK/uLFo4Yt3r2LIEOKHEmypMmTCf1h 27Smpcs1dJzxU+gPpc2bOHPqNCkuzsufLd1gS/jOi1Gj0nYqXcq0aUl/LIH+7EJ1U02DRY96SSpS HpavWDg5HUu2bESoUqdSpZrpKsGsRrlwDekVrFiQ8rLozSKvZDpptgKT62e2sM1PaV+uXSwL61Eu XKCNrPtVE929fEX2i/YG895Q+BTO66S3EzmB6dLNM8y6oLXELRfL7vKu4LsuXiBHngwWi2W8Vvb2 BTmvs2fMWoYexKcFsx2Be20N3JtO4Dw72Fvv5OcTqLOPAt/J/5rdxZPtLlt0S+7a+/dFeVaCZ76I 7bj9LMoLxvIcC7pe6f5lUd0/6exlkR3xaceQLEBtAp5tbsz24D/vbJEeZOvR1R5d8cU3XEUF3mff aQXZ4RlX0U2n14AhZnFgggqm1J1LdLhlEDqzwfKWheltkSFeGwLX4YcT9fMFZpoMNtA8oSBHGEHN 6YWNNKv9k2KALBpYEYJWxJjQOEChs9B4i8mxI48+8gaWexbBN6RF++n1RX4FzQPHlSpm8RxB2NmR H3WoaUkRl14ihNhLmzDEj4QDVYjmj/9AIyk00tRWkDjRZBrNTANR5ptA4niiiSbXPJmQOZmKI5Cb HiI0j2oKtf/4RZUIMaeXFqZaqdeeCgE6EqGFGtSGYuM0lEkXcsAyDqfhoZkmQZvoxkU0BnHSm6Wr ttePK71hUceEBOFTR4dW1NEPq1YQKdA4xmXxBrUHebKXcqN9EQthqeU7L0F78ZqQryIBG+xA97i0 FrMK3YPwmTxCGq1uzlR7LUGeasJtb/FxkatA/bxBbnx1mEOuutHIh+TG+Oxl3j/kYBaKrlnA8Y+J WXQSoGfTaeFnngNel91A/YTS4RdzDZSOHV9IJzDH0thhS2h10kJLsQyhE89IYC7WBkiONlzQw5BF XJC1YGH7j6fdYkEumwK58nGH4745kDgdHtcfQdHsFRo+R2L/Vt+uLN96M2Z5AghzlnoRBMfbRadD ri1Lz6N2fFjQ+g8tVWRehRsbExRPF0sskShB41CxBBVXC2TNLFaXUUZo1qjxikDQyLayRV1b6PCF WIhNENlfmf1O2hiTOyE+byefLtBffOzZgALVodfKcTq3191RhnZf4TwHmrhA2CSPhamLk+sFjAK5 8fH4AqGjueY6ItRG6KHTMlA8TdDfxJNzKDELFUpQwhzQEUD/Rcp2XHPW7rbwFd8NZBMTa1TaQiaP kpHLFQRxG7lqIQ9PvO1DFozPu2JhMvekTEr/OKGIAESz6mwvQIbzVYsGwqW3sUh5XQJf8uz3D1C8 L3NX6Nw//7BRBfotoQkPNOISPiGQ/gGwgGWA4j+cIZvGXCR3z3rgFq5whd4ZBIJle0u3NDaQEFqB DQRhA7muMRANyu0fHgPZk+gmnyf9LQuEkcZe4ECOJmFmQLbQS1JSs8fUcA9L3nORQDpULHxMjiu2 oNw88HE+9HHJDvOQBuUE4oUqYGEc6HBD5qj2tdBh4xOhExM+QtcGWswPif/onxIigYkCRkINSjjC PzwhG0hNBIsO4yIXHSgQMAZPjL1hI9C4YDyBIK9DaATax4bzzPhA7x9xswLVaqGXOkTvVlDr24oE EsgsxBBw/PpP9wiUBRjZyQoyEwgn4sNCeuoQRv2g3JPoEP+f1WSODuvKHJ0GcoUl/qMf9fuHNVL5 D3QsQQli6h8TCMMEJUwhhbnEBy8X40uJAPNrwrwCMf9hTCwIr1sLc6MVLIUueA1EEyNbV4e4UJAQ wksTeqFWPz4zkOop8h/lPKeeCoInGXaoIFD7BwmtAKDJVSmfMEJHfO4yRCtUISlAFNM/LEcQhC5B OZ94hZhecbqBAHAWsRSgQHA5u38c4QjoINNableRj0IrpCMt6UnBQtOakgteZiRZTP8RQrY5Lj6/ aZ4VhjKOvZCynN8DqjoD5C+YCfWG6CNIOkDRIQAddSCf1SRTB+K+KthPlP/U6kEcugTVDmQOS5jD a5Uwu/7/tRWXaHUrXGu3GLpSxK4PxOsXIxieIL3lrwIJbEGuMdhawC1fqRGtFX7ToerkTS+mgiyv yjmXfhF1sv+oLmo+yzFbKLazi8wssCKpTYL88x+w+CEdkkoQ1rq2iUvg4T9eodb+5Ra3AnkrOni7 lkwkEE3E3IRwC0KHLh5TgmvCCnIJSy6DoGs4MMXh0A7aIcIsNYfk3AtVOTFOyn7XnKC15njRN4/z Pi69IJ4ZjNjr2vfi4wo/7ELn7GsQ2Op3Fv014D8ArFt0WGM2DtkELMzWKGclOKRWJIgwH1zcCNtm wma0MLkGlGENJ+iwObzk7/DUt6R6lyDohTFmQVxDytkz/7zqnXF8alwFgG4VtZrzJY8L4uOB8Fe2 /l2rkAVMj9ksDCE8igM0EIbFJwtzdFKe8l4rI+EOAZZcG0MXl718VDALRMwDKZ8VuPLML6A5PpVN M5ytsGbrdAgLsZgHez2bWfXlkL1zwUfmQEEQbNBBc3auL0P5vIRIzLa2QiaygP8xG2swxBzO2gKz Gg3SRxskpFeYtBUMfGVLJ5dcTKajiv/R5TpAt3OelrEVeAXVcS/1ZSled0FULV4CfZa97APqm8m7 6nvqt7Q8xAfU5oHjYA9klUtw9j8+0YTZkXVrAjlrWv87aLjuUjaPYMgrnLUGhm3R0VyENEFDutf4 RJMg4v+2wqU7xGQzDqiwC0k3l+JZ1Q6tph9aGDeMU/3mVbda31aI3z/mOdp/2Fqr8/isVK3ghoHE twrjIHgVhP5rgOJDaloNHRP/MT/ZQiN0ewtgRJNdcTFZgwpU4REpD8KPaLe1WRYaZrVDfm2SI7PD fmV5eCY8EA/Wm7kmL0gtNBENaeztszUMZ4WVGh9Tn1rejzdcvdO9VF5z8s1Etzx7QRyfKoipH1jI XD/6AUTC9KPgDS0iD+lwxHiMI6HxYCU62qAEWAZ6yGX/hz/WIAUeSWEN9ECIP+gQbXPsaMHBtfZb sH1ScqmKIHJo5lbX1lVm1jvp9eYwI9UM9HVv9mM1X+z/vFE9/qL7fMW3lmQ/OPtm6UojfOTlROaw QAvU2vnXVbhCgzMnGffll3ZKtASpMz8FpASY0ERkl1vLtl+9JwUO+HtMpnvE5ywQ1yjYBnJX0AUF IQvMd1zkcnIUQi59JRBqpHfftmUDYX3l8iQhNILWNxTwh0OiVlmrxnPmN3mhhUOWV00dUkmk9UOZ o1VEBIShwVo81A/5Qz+y1T4PFUD7g4AUp4AW9w/8wHsP6IBb8ArmEHzvQA1rEG1ZFB4XWBCegG3P 9w/3gG3Z5oGdZwUYlEIlGB9v2DYiKA7zYEY6p1JsEA0qNYcZ1h88qGFYQF87V36SN27pFojrRn7y RC7Y/5FZPvQ+lldMP7QeRjgQrxc6TUBf1tAEtZc6CsU6qvMMUIMO6GAq1nCFDwiG0VaBFoh8AuEM 2NYF4vAOVKSGwkMumXNGmaCC8ZGLyuOL0KOIH5NUFuR47NchyfhqXFWIkRdvPwdf5CIz5OVIlIMP /BRj8AU/BdEPsNAFm0NK/WCK9HV10NA542gRm6CKWMiKPBKB7zCGBGEOaohtbGB3jVIFnccGu/g2 bENuymNGroWH5BJl/zAONpdCkyNvLgYHzeiM8XaIrGYdfUIQsIBqhGEL2HCKBwcKoECISIUOINka /vAJ7Nh77niGyweLAtEF9chFspAJ+Bge75MJsqA5H//TjPjgi/EhC0s3ZwWhUh3iW+1meddhBZxA GD4TC/nRD4HxNORkC1RSEKkxkgPTFK9wkr6HklugkispTCMli/UoB/0gk8IkPDW5SzgZH165JL6I QUvHBZrQjNiQTXt4EERnBQ+JEEuFBVf5l/MYB6poIVe4CcGHEPHIkm2jhmT5D2bJRWZzD5kwmTYp EDeZOWxgfAmBD7KgCZ7QlgsxSQkRgzQXc8oImKipe+FgkqrYBZ8AmgRxD5swm7MJm+LQBlzEBr6j MBHRD+8ALkxRSVYwiQkhOR1ilakZLO+wnO9waMmZEwjZIXCAnNKwkMT5nNiZnUrRZkiJDU+VDrAg nFZGkG/aWZ7miRL9IGqcNp57eZ7u+Z4T8U7rWTnwWZ/2SRHrx2l2gJz32Z/+WSegsJDkwglr958G eqA3gg2BgQ3pIEQIehMBAQAh+QQAAwAAACwjAAcAQwEsAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAj SpxIsaLFixgzatzIsaPHjyBDihypkd+4UpXKTJlSxlKpcfxIypxJs6bNmyTfVVrJsydPS/QUvhsz hkwkTJiCerQXr2m8mDijSp1KFSO/nT6z9myWcChRMmDjfWwVp2xZj/GoqVUr05+8t/LuVZ1L9+JQ rXh5QvJ30OtXMmI9tmpDmLBHaoTdKBZpTlYdL5Ahc+ECShxfhvxscbLDKZY4gf3kQa1LeuS4J0+i 5M2716DfooDHFjbcEXFiNyDHyYnMe7JvNtIW3vuCpTgWLVoEykOOXN7A5cizEBSnqXotjvjSacdX OiS9MaijqP9erbWUa6LoybyTPftw4cUd/Xni3du3fU6XD8IxbtyOcuZaOPdfdARFk8WBmnBk4IHR dPeRP46gFp5qYzyj1D/+lGMJXusR9FpRHXY0WHu1zYYbR/e4QV9k9rXIhR35EXQPf8bFMmBzz0Un 3UALZpHgRj026GBHz0g4oSkxEjSOVpYU9M4U6BEVIkefzNaGeyRqlCJ9bMAyjmj/vEWLJi3CaJA8 /NkRTTSfhQmggG5qcWCBB/qoYJ1CDqmRP+AZ+cQsCy2Z1YX/PLkSelNu9EkZjNLGkW2ErbGRP5rw xgY2Cokjh320GBQNf3AKdE911cn1X510Ingng3puVI2fT1T/0pApWQE6kKE8jZGoRos2eqVA/qQ1 jqkNBRtPftSsoayyG9HCmyZJHuSPHfYRK9CnxoWqkDxWoEpSkK1qBAmsux7Ej0+WjONhVolSA9a7 mByEybthFdRrowI5E8dsj6Aj3CuzfSJXsstKKi02m7ChsCfYRHvrs5f5I40noJgjLbWTwVIQtsVp mxC3VnQbUWjcQQRuuBjB6shDpphiDaG3sluQu/TGa9C89AY20Cf0kuGPJVYWZutB4xRc8DgEL3sQ Om4sqzBkbvh70HyQyXHZOGzYFxwn9vlzT9cC0UijgKOSSizIIU9H6nUE9RPLF3VmUQc5CGHzRhZf NHgyQfjY/2LH39j0c1A/0mzGiS0lOzSPLbbMk1A/6KDj+ELzJC7Q5IXCyopGuPKU6DM921wQzu/q LBDP9EZitNHOLL16wZsYbVDRBXdBn7pO8tbhOC5ycc+mk7EhECyTYdGm2KAql7xyIafNY50/gnZ3 3HWyTVAs1Huyt0DYyBk3HJgLlI73cWPKUD9wNG+FHYIXZAsWzbNPECx00BE4HVVUAQr3V1RxBaZF 8lM4OCczgjxjCjWTV89M9w/U0et1BYOZP+IAQQgW5B6164IG6ZMoWETGE8DKmotAcR+B8IMLxdnf P5CXLeW1kHnNS5WdBqIJ6lEvHQQhhw3xhieCpGOHWdBC+//+gQ/yUQ93j0uf+tZXEFgs0QpeGCId rFAFWrghf/mjxTiwmD90BNBI5ZpI51byuSlQgQpgadLNFji6noHlEdQYhyxW94mZ0ZEa+npdQWK3 Bg12wRPQkIXt/JgJgviDDZHpEPF61yKNCcQNxfHPClmIBQGh6YVhUl+BQjbDf8wDiNUjyPRAmad+ wA2InBhIKHYYsi8sxBZPDBkOBYKOWFpBhf/AXxWwwEX/9Y+Ln2AFuQjokzKa8YxqbCO9EkW6d71C SasbzT/mYDQk8qMNq/OQHzWIxBRt02ICMUdk5GBC+wDHHHRwUZ5AYRzlyMMV/LnGW9p3yY49R5M8 al70alH/p1gIrh+egN5AdFin4OCjDnHLEzbqpAUcdq9OkzulFsbRj3Qo0QrhMwj8rACHcYxjo7i0 Q/NswbTmTU6XVXDDOEDBRTdg44r+G5efNjLGKRjzmMkkiCV6xsyexSFJcyyYNQaCwYK1wknZHIgg /eiKgoxjm478h7Mm06l/SMM+HTpki0LEsQIt7zlfRZsVNhmyfSI0C0P8oaoEws+1ejKhA4FDnWZp 1X4KpE6hGEg6QjbRhMyjebN0ohWwAJrmBecf/fBCyByJ0pL98gqCmwcWZWokh4mxgAM54EqQeZCd LlOZ7+JKQehhNFkMhHbLkhpB6FC71W5TtQPZpvAEkgnf/3QIeFyI6j8W6ZvRcGyIHKtkQeopXBg6 71r6NIjl1NrJGh4Iif84axaE1I86waEgp3TlP5qnBfP9g64JgeVgBzIPO9jisNho3hClEbIT6ZIO A9ElLrF4iWFmpKY3NWNOB2KJM76rp/SC7UDIULA6CiRpzDJIK/rox4H4Y5tdmNo2B2KfcvoGnAK5 aoV51E4OY9KF9jTuWPNZ1oSY420CFcgp0UqQtk5XfHYlCCey4LyLWuELscgoQgQryYOIt8f/qKXz dFnVXGZxIFj8ooTCKBH8FkSzP+nsGaecKM/+9yAONMpAFrysTRwEGhC+FYTfQeYyvyMT21zP1yYD wn+IY//DA9HwZFI5EFh0+FpfBbEV4CRWsloheqChTiyjF7eN9bCuB7KF+wD7D/Eu8QveRYhImYgQ ToQMl4gNWRUEQuT45s+7SYbVAB0CMydhViBQXsl+BdLfKVOhymh8F0I80bOBeGJZf/xymAXyDgj7 GsJbWM87tsCFLagQGr7xMkFo4Rss6JYOxTkRnj8cpuKEjM/4RG6JB2KOL9jyzwPJ9rUO7WjwNprR /7Cx+jBtkEkDuSCTVjRBqFgFx3Wa011Ecv7KobmHqEENsyh1oU79j1RPYdX/aDWVC6LwM87a1VSw 9TbbXBAwT5jXv/71FjYu7I1vARoC2USyC8I1FGIhT/z/ME5TPRxisDYP2zEkMbhFPOhwx1zm8nY0 dM8tS9C8L5aRhnfI3k2QSev2H1jEdxU9XQXVYtEfsCoDqcUjHoATyskGRJeUXQ1rV0vT1hCXuB8p ThCLNxjjGfejxzduMXN4HOT/2ASxuQB3CpscCyG6hnHaNO2WK+/l97z5P6KRXIFoQn1vqMU49rrt 7Qp+8CMVyDgiTxBHW64f2Jh08+h8EEtT2sdDJ4hk86f0IuvS6aRPA6wEbhBTUJ3qpvAQ1T33ZK0b BOKvZjjEy+UJV1N8qRr8VcV3XSjiL2TYG4e73ImtW3PcHQujgSQWouhVaosV5seF/Lbxob5r6LXw /3hD//MsFwvKM94KeS3649uH+Y1eFyHiJexA3GAHWPiLvVAkCDby594jKx31m9YMsAIJmJEarxcF 5SB7r2dTtdcTCId7XTdlOycQZeB7A2F2GnQQrUB8D7ZNluUkbxdyHqdsw0MjLGda1ed3mQR4IuZn P4I2b+BD4Hd4IRNp4hcy8uZ4N9Y28eNJdgA/keZ58ldR2nFa4ycQ3Bcy/iJkVqBa8lV6TAeAGAIr TzANCuEPamCAVDcGTnKAUZAoNWUQ/gCBuudqKEgQ/ABxdYcOECdg/9AGxsdgGoRhAiEOWyAHmwAL bYJ8xjY8awcV70AjymYOxkF9KVhct6I+2Ddi2jZzMP9IEK7QPDHYiNFzflaQgxd1WP9QfiFjUM0D B0OkWJR2fgPRD5snEKCgXmETMl7AHdKARVJzb0bWdPq2af9gClS4OdKCCRLyes/QhQcIhlkxO8e0 cDqFe18HDRBnTRBHdv9gDb5GEK+gQRtXSASxfBtXVfzgcfD1D9ewdnQgDs6CBVdwBcUBX+LgBXvn KXlWKIoYeNlHeNsmVkJyDUtEXurjCvjAO+qTg+nVPLGQDqkYMljQPhf1BYwjipcoPoLneVDkBqco ELSgab3UjbNoevkmEPmzBMACBVRYBtOQDwORD8/QJ70YBWOQJO/ghcLoE9CFhcV4RhE4ZY+QH/SA ezH/8ggQN1QCQVrReCtrtwWwcBnQEJSjsXZ8sY0eV47myJTmiAXQpnIHEVza8g7qEyJ9JnM/Yorf Jng0+G05mG5g+X22hAUlQ4oDkYRPhDn9AFNchAWYI4unh2RLwJE9mQRJQIV6aSTikYDA+HqJ4g+z txLqwWuPwBNcV4YQFwfj8A7QUIGu9kxKgnuPAA3T+GsF4QlBuQWbIAdBqVvYCE7L55RX4AVOSSPO yHKIyGtXCY+MqH0z9w+R+ERcUAcmRZbqwwW1QHmXs1FLxHnDY0vehZYD8Y/qE3Rt+ZbQJZcZmUv1 QxDhgJd7OZ1Do4CAaRBq4IV5YYz8BXGQiXtT9nX//xAH4OlHcaB2W3BBa7CZQbkGMVKUG6ds97AF pOkG10CaT3mG7GgcYNiarCl48hib+MAFS8QF8xCgmvgPxmkFXJAOARqWPrhENmIQ0uCbUARei8M4 BoEOnKCOnOCG3AMKnCANlnMR4QAF0jmdfhJ7fcGSBvEMXriAlrAhm5V7x+hq5gCeU1Z3BEFauKdB gBSUBmGH7Llxa2At/zCfHgcV4uCUXnAPbUmansBkg8cf/dk8IWKVgkcd1aGf8/CVmuA4B7omQTcO nvAGnuA42bEdB5GhiKMQ88CmKNOTZYCXeamiY2CFCLGSwSiG2RmjUeAIPyMexzSTETcOOiqZB2EO a//galIgBZ7gD/DpcQdxD3HAnnGApJw2ggPBD7KwCbLAftfgDM5gDtLED6TqDChnZkMEGppaEdlR onM6F+FQp3eql6YgntZJdeVCD396gJjAF5bQpzc6ZeGkBq5GBjyZEPzwCo8qBXHAk44JDdBgDkx2 D9CwCdpKC3RYEERajnz3EP0gB1I5q+YqE+/QDJBQBkYCCaYQDh84EPQACfRKr5igqxjyDL+KCX75 D/RgZu8QrwVhDtRqDgLbo6zHEW7glOF6Pq7wlHh3rhI7sRQLEuZAmq3TEPwgB06pnxX7sSAbsg4B C/UpDq1aEPzwsE4pBycrsi77si5LB/h5BZvgDNdVQGbi4AyusLCk6QX4CrNAG7TmqrIzW7RMKQc/ K7RKu7QOQg1dYLRFG6pMO7VUqyf94AxPC7Xl6ApUWrVe+7U48Q6fyrNH6wrikLRgm7Zqu7Zs2xEB AQAh+QQAAwAAACwZAAkAawEpAAAI/wD/CRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzarzY7xwy YiCRneu3saTJkyhTqlzJsmVLe6fMxJhJk6YZYiQTwlvEs2dKe+6CBrXnsqjRo0iTKlVoT1TNp09x EEt4DmrKYzSMaDVyDGWzJGCTQKLnkt6zUmqoqKVSxlIzdBHRyfr06RW1eEvz6lV6rgbUvzUX5SxY 9elVGlm1dj35NWySdyv9PUu7tnLlMtD8MfT3aY3nz2vuCez8mRpBam1StzE9MB5dus5U8pNGW5q8 vbgdMoMBuPfMIIMHFq55ODFXr44fq3xGZopzy9DVlrG2kDToNXEGWl/DWiA10N3/xf9bw6b8J5Xy vKjnIi23+4TcYMj33duMweE0iydebLJxWMgn0eNIFFE4N0V0CMqi2UH8XPfZeaOBd5qErXlmHnrr sffehgTBU4N8vNEkCjcdEuMXVFMRhN9M+imGnGMAlkTPGAQS6BwZpTwzzjvvWANNK2VAFwlC75Bh JBlrfEKNM+NoR6F3T4r3GRsQoiQPF1hqyCGHe4AYohnwIGSPTFEFt2IM+mXFX0n+gRWjRjPWSKAl 5Sj0jiWWyXKQNUeSMcdBzrz2SZMDfVcaQeM9iF6WWm7p3jleymdGcAb1Q2ZNzKhoFUpYIabmi/+V 5M+ANZJRZ0PWWAZXQdCoZaQnERn/6ll4Rl2ZZXuOuidJpDCEudCZkmhqGGEgHWPsNgdtY+yyRBHU qaeLbTPJVpMgyxA9qjAShhqVnNqmckSyAsm4rISzYEKYyOkIPwO988wsz7B70DiV/clqZbBCJCt3 E/HD4zvnbjaQrVjimituvIrikCQx4LAIMdw0K9CZBhETg6c0LHLQIhjT4E5BzyJ2DD2MbGVyGGQh 1I8qSLTcMliM5PPtm+2qkVwST0TRTMAEvaPugvxYIicZkL1SmSX/pLoWoe8gOIcnnqT8jzNQQ00o lIcOdE/VnsRWED+yuKHe2HTQwjNB0siBJRvS+ENwowT5cw0nWNRtxzWUEiSOJ3XU/12HJ+JM1M81 mhRey20J9SNOLJrEIk3eB+EjjS224EPQOJRjIxyvJDZkj68HUVyQxRhrbBDHGH/sbMeTOGHy605I TVA/arhsO1hQVJKc6gSFc3NYBKpx9j9qyJkyPWTISSAZ/lCmFjQCPbJWKwI1jaBaMXrSxfZdQD8Q NKB5Xz33XeSrtdjqdTG2em6IVpA/mjCKpSbmMGrwwG5wUff+WMBhjkH3sAP/+FcH9zlEHF+wggIX GAuEIHCBCvzC/QQCwX9gA4JY0Fw/7ABBL8zjH6vgFeQkIjqCWOxiiDFdQVDnKd4JJGSIeZ0MnZA3 ltnOZb8Diwv/4bscgoUJURBeQf98VqNnCKR5yqvRLKJQmf/9wxyV0Yz1rpc98onvH9CwYs/IZ75/ 8MMN5Nve+rwgB4N4Qn5ZYoP9CnIPLA2Qf04UyAbfyL83jNAg4oCgHmthkFroEYKuKAgEx/FHLMwD Dn+Ewz8oEakgaKSEAzkhClVIEBYiZocwjOEZjqGKMMiwFAWhxw1bxghV2Ox3LswHFJJThnFN4YdA nEVB0kWgMSxoiUlUnhTUIq9/kGEtkJkigqrIvStmsZhb5F4XZRFGMIpxbG8aBxqnCTd/eEF/dKyb F3oZjWzuzwrRaEg/uPBHCCJOIIQs5wKv9g8MlhML6sQGGiK1h0duyoQ0SeHGOob/yY4hZhkD6Ucp ZBicUtzwCVLbBioJUorkNCOgp2QCEHvpDzkZ0YvKi0Q4wpE8OUlBCgTBk1qo4w8eyaIyj+DROHqp PWR+T4vt4uJA/EG+TMjLH5lQn3qumAlG2dSLPV3jQGiBTSzYQTT8AAX/AimQvtXtDYi7EjytwIWG +HGB1/jHlRbIVIG8YYFcwMY8xlEHsA5Gj5xIRzoQCcG0jmOqVoDFPL1Uz4xAUiCSvBglB2JJj4HM n6owiCdNNg2CPMEItsPkzXjXj+RcoiD9eGUSJFpYgYRDTvIyhZxM0a4kIm0gs1iLMfF1EE+spXsE Oeb2rvgOmQpka3LY3ptaq1Px//GDUWw4122F+g9r7s8NwaHb/uTFv3AOJI9U1YQBE/JVBRr3H8il 6kDSqcAPypGcCtQcBRdoh+lCsLsCkQZ35wqiumLkrv/Ia8b2mbq/dkxiA5nG60ApEHpspWVqqNRi B1KO5MhOIKqAJSQGotngHVFOtiQIqZSYWtE2eC2fLYhpHfxSl45PmQdZ7j9ouwUuiE8cjNLuQGDB W3PwL3AEuQf/svoPL+zPC+LIST/OyRB8QNByctSEK6Ixjpy4YoFd/Ec0FqiJgUBQxP0Y5EDSMV56 2nNY+AwMe1voXk+d4SD2NRkjBrINkyFhTQNhxO4GEmDHHOQdYZHoQIpHIFn+o/8ccnLzQCKhPOp8 76NSGC2ES1sZY8L0wtsL8tfG4YotGNrQ4oMGo2h2DUY9t5v7y5sb9pcvT7zRE9foZUPMAVaGlFWB KB7IPDq9XQWmgyA3XnKTveRIu94zkk/Zq0D62k+MTQIhsBvIMV63QwCPWSCQSM6/hj0NxzAhZXI6 FS4JRDM6y+lNmMCzntUSYYJM+Hmp/fOGXRu3cbRiDYcO9xYS3WEs8ewdjh6IcLHghoOsu8hPpKMC 2YC3hgxZgfBWCARPLcgFGnmBwangQNDB3RBG6o6EAd19Xo3XWE/5klUWGa5fp2teH+QYv/5HsH34 OyZAxh8SJVDKICEngzi7RgX/UQOe3wSNXVKbzxQWiGpRG1MMpxbc4ha3+DZx6KoOMd0CWTcnSru/ OgzEFQPUIxs0fJB7WyHfCdm3QVLdTn+j2uoCIbgC7bCbSJ3DITIJwik6JyzijM7hp+NnxGkA5oHI sOIm6/U/joEEx/DOERzPYTAlCsSBTKFGZTCI8hxBEHrgGaSpPXy1B3JtKvjZwtu2uUBgkfPK7zzc BkG3G58rdHfvD+rmcGo5uYBwIROZIVLvtwL/vfqrtz7r3LVHwjz3lBqkaGIMTy/aV6j21WGMvgZ5 +wstbhC6230geA8LFMbF/OY3nyzv4DsTBiKnARdeeZggyCvwnP3E43nxAhEp/7YrvNotHtp878j5 JqBhDnOEm9yH1vSGi8r5Fx9EE58HoCzkUE4WJ8TpbMAQ2GUF/BZQAld1r1dqVkAQWmcF3YUDkVID pfcPTvEUp1B2+XF2UpZ27eV7nrJlB/E6IDh3r1NZBWFQdadDyOcYafAQ0cd31Fcj+UUQy0YgF/UP 9BAFK8cqincQlnB4xvR+PRNu5kN5hwYL55J+hwZ/hsZo/OM1QsY/krY/XVUp5vBjp6cQ8nCAAiEO 0XAN6WBdmrBAz4VOC2R0Cqh6Czhw3PUPXUdXv/IXCodeeRUDYHAQ/lRrnuIEWPY6tyYQ7vA6gSVY OJQEvPMtWPZfGyZ9AwFENf9yLv7wd892RHNAIFIwJDz4fT4IhKklhO1ChAORCeEWMEpoaLAwEO53 aLRQEEqFBVeABVBoYvsTatVzYloVDZ4QP/KHhU+3EEm2QHH0D58GTgIBgAXBi13FhQi4hrC3dQIB gZEiCiPkIVBhXrgHZVyWe/aQh2tHA6dCEKrwOvzRD68TBgbhDrdjiPyVHOEAWY4BCSYofQACCSGn M0d0cjXCLv7wCqUif1h0eJhYED8obd73UawVbpswEOIWMEZoaAkpEPwQbl5wLip2BRZ5BVDYD/zj BcEhBy9GEio2VXpCEPynQOYzhs5FEMOYb0y2QNY1ags0khYEQda1jGrIgG3/+A/xwStBwAzBYQ91 SBNfh4EsQhhQgRfgyI0e6ClgEBz94DomIztnII4pd0PqOBCrpHzB8S3fOAV8147/MAvSFwWmMAtl kEv+wmYEApaZ+FEBSRCRwIl3RpCfeGgP+Q88d4RHBA3idpf/QAfhRgfs8g50cJEWCYX/gHT7Qwf/ 8w74tz8yyQaAxCPm4AkQ5H8oSYzHBUGacA3RMIABOBCZ+XTRwIu9yHrMmIZsqEB0MBCkwCsgUgR7 sAeXAhUXaJTYKBDwABWTomv+5FdLaWXNQg9nYBxGYI4E0WXiSBL5wAijdJUC8S1QEA708A7fEngD QY8S1X0vOJa5lEtsWRDP/wCQBxGXdClzclk9CDkQryBua5CXfTmEW2CY9HmRiMkPLuZNWMAGg8Fp 6mRWokmGBVGS6sRO8zCAf8QFOKaaqImTrEkQjASbIFIfoZN7/4ADUIEDkzAJYPCbwOmbHgoGxRlD W/GNAzFYMnRfN+RC/ZCVeQcuAlFsfJcT2il9TDAFZ/mdUUArBDGeePaWc5ae/3ieG7aeEFl5hrYG gGloXVAQn1CfFikLhomY/3AP+UlHXKBhsvCfCvQmmVmG/3Cg6lSFAiGmCVqTDJqmDdiaBGFwEhoi T7EHkINeFOgbNIADZtB7IOoppeAEHqoVI0gQgZiiWvEENuQyO0QPLupDD/9VeJMlUY3KD15po+FQ YEmkBorYo+RpckLackRailvgl3yZc13wDtQQbsvlD4VJn+LwDlMKQB75RnLAdP/QaOW0dAXxpQaB D6NJVf5XEPhgmlbgCnljB8YKXgNBOZRDEPhAC84qYgPBDdAIm7V3ewuXm3KEoYCBA/FAa2t3DPHg p795BiOknDKEULuGWC3TazPCcSZIEDYjUVOQE/SgBnw3Be3YPI5IIJhgogjho25Znp0qpO8gBZtw sKtIEOaAcw7JLvxwsAfLo87QBRZJB5DBD86Qsc5AM8flCWyABXLgCcFYKeLgCoWjCbIwsg+BD57J Yw2BDjA7gRrBDEIgoTP/UQOnAF/XanYGAQ9B8BdmgBfeGpxdEQ8jijGqgHDEKYL58A/bwAhQC7WZ +g/TcErKVwpNexA9tJ2FNw3lEBz/ooj0EAlkGwnd4S9hexTV+Q7+6IsyezBb0g/cQAynMJt7QAwi 4TkgsbfWClnLcCnV0hrnIBTuQClAQbgSUw6lwAiTsAw6mxD0YCzT8LgO0Q9CMbUEUQZpBnwRQQ9U gFlwG7qiO7qkexJo5hic6xDvIIkE0qil+7qwG7uye4Ks5K8JwQ+mYKMzOLu827u+uyW6w0qywLEQ GQ6YYKNMIES/u7zM27xH0VDJwXdq4HzIK73D47zYm73aSxHTIFmwVL3gPSsLb7u95Fu+5StQ3gu+ yBsJxGu+7vu+7tsP4WAJ31u9ZSALmAu/+ru/2vsO5dAMAGwJsgDAX8u/BiwRAQEAIfkEAAMAAAAs GQAKAIQBKAAACP8A/wkcSLCgwYMIEypcyLChw4cQI0qcSLGixYsYM2rcyNEeuH0cQ4ocSbKkyZMo U6qMaK9YHhQwY75ABE6hPVQ4cdbsmKpnz50c4YEbOnTlOWbERC1aqorYuX4S4x07purYsngrs2rd yrWgPT8xw4olArQgOLGoQoJTwZZtKpFFVshdAQMlN1E4YujdyzeGpGoO452hQbgwjXICjxE2wrjg McaMGTlmfOSIZJSzImmOFK6r58/KUogdHTatwbOl1bZ1C3cuXZPcgvSd3RcMt4X9cBg2DPWfYhqQ J0O+PPAxZeImI0VZHuXZ5+daEZGeHtPPabSqV78NGdc1SXt7aIv/7yuq98FluwufKV64MUHjkYUb sZxSOXPn0POfVEZ9yBDqxZiFHUdradeadyLBMwNtQSxCzIOnLCLbbGaYV9Aku51xzCTLsLeYEfIZ gZxvkIlYHxPMNaPfiiPBc4JYLKACD0HgvAQjSAOhFpNpGxXY1nYcdTdXggvyFQQy9iBkDzET7mUG QosYtp5B2zBipZUhjljllaqcyASKKrIopkZDnPAiTDzMeBB/AwqkI0w8auQja9y5tkJICvJVAzMO EdMXMQdFWViXEcFn4nORfPllmGM2ShE4Zp6ZAo4ISRfWCzS2KedqKmzXDzM+qckQPD7dJpCQctnE zSqrGHNOQ0Lw/2VGkgLZw41TCXHTF60ECUrYMRIZOiJE7xRbrIUK8VMsPwMlqiijCPlTLD0QKVus Pxy9g21EzHqWR6QwKbPQPizExAIRvL6JQpz/oMJpWQIRwalZnL6VCqcrAAGvWTbYKQOfqN55EDho wGDwwTBQwqtBqxislxi9wSOJrEkSsxRT/1TDlygDqbKUboWBcTFWAm15ZZYFmcwIoSmrkcTLMCcx xjQKvaOGokyo8c4/zi4a7TNlSCG00JjsnFA4nww9dBy0dDvRPbCsscXUW3xizkL80OLGFlx0DYo4 CL0TzdjR7NxPNF5ggYUb0Zj3jidqY1EH2AilEOkJKTSECiLKiP+ao6btvmuQvKvRu9ooQHCqwlx8 HsSMna5REvBBpCBsOQwzNO7VwTHgEHENFP7TpF8CicJXb76mR5g7HhaG8nslDlvKETHXnoQayAoU Ds44hwMJztAOFA4VzCktdCTbEuRPJMY3T3dEtFAt/dSwJHTN9FxzsfY9BjkTNxbR3OPG92rLAZUr 5KvtyUEu3p3HReqy6+5q+xLeluGKKz7XvtpA7j+CBKHE5QaouYEI8GCv+oc9QEcbP/EFUArkyzYE kjrVsS4xu3ldcWJXEFVUhna2g1klDBKOl/FOUVMAHgmZUzzjzSF5AmFe85p3NYjAAnvTq55Bbji9 K/hQbV7gHkH/vBc3V6QtfViQBfrSZwUrRMMg2rjbCdglkfgVZH5tqd+8aJQ/FdigCDZoy1xsUJB+ yAByQCjCGf1XEGZc7gZouIHlZrCwfszgYI0YiBjGM5sE/mMRe+HYH1VnmAv6JoOwG44G/5GPD1bm di6znYXyMQWYKaoMJ/QZQcqhKBZSoXmRIMg7ZjjDOEDEHDjEntEGIo4e+vCVPvSChYiIxFqSr4lW 4IJBUCFFbcAPcKhAAf0Gt8Uc5c8YA9FGC9jCOII8zjUyAAol2EgQGSBMBqb6hzEsRwmCIANhamJG XyRBjFPkZTbmcWAMFlGyB4HBMIuYyjF49RvXJTI+9zyUQGb3/0FHmKcZtVvlP1RRu1JApR+yOGHw MKkoKnTmH/x4hfEe+g+JDm0OTqPGRB8SB+l9gln+oIP0NqG8LlDtCnQwmji8AEuSDsQZrwQi3cSR Pi7Q7Rq4bKJA2yXFfUXEigQJ5jALYj+24O9HbWSmXPhAkIDBiw+Qc6blsimQbSLMPI04mBAGck69 IGMguupLEAgSVr0UJHXAMkg9CbNIEilyIKVgRGWegKwnxIyi/yhDzCBREEvwDlq7wxm1CIIJpZWh WUqjRkEsuoZNQMMh75BeG5Lnj+k57XqvdAMM7wHLKzgNprAUaCbIV0OByCGnpRUIL+/mU4gAdSBC zSIxC8fF1f+0IHdhnEsLCGInIBgEHlEdCB8QtlWD3PFgmkPYV/9R1hjsoSBd1YskCHIOvpzVMGl1 DCI3+Fbu4tMggyVIJF/GqHzUDjEEocdfCYszUxjEH8YzmgyF5tDk8cNpD4GG9B5LEFp8whnO0NZA 6ADL1ApEFrB0xkthKYeC0BILbCiILHKq4KD29JepCSpMZEvUYrqJU0Q4yCiUugJaAdc1QKqmnaqJ MFIcpGAHc/E/zgFOgVCCL1T9R3geSF3r9gq7B1krDdoqrIXkYxulsGvMGPWO2h0khc8iCO/QWxBM NKEJQquwRps3h1mYA4YP2YT0dhqtzh7kHS1d8CvXN8SYsvn/pVaogpwrDFspUvGnwNwwW7RIW2Ma yCD3WpxcdgIOO/l0cgOhy8EoQRRWsUqOB0ODQNx4MK7CYC8G2fFe/PgPZOyFnT8uTHbfs93EcDCf w1LgNCrxBEeCkLzCi5kaDvK7KAuEH7zL3T+awYQrNwETt/4kKaXwCbw2RMxUI/OZ03wQMwsEtD6k 87MT7GA5z9ksUrQOQ5ShDEplKsOwjcmeZ3u/2iLVIMwQ4woIbeiDIPof/ZDLAOcNA0n/o2EGs3c/ HBYDexNkdDGwkOn0IsiBAFLUQS61W79r6u7WqhKQcfUjYS0QgMLMEbRWoUDewTuE8LrXTQilQMxB BSwPuw0G/1aIFMbcEDS/0qUGcfY/oH0Fac+c2kO0dhVsvg8p8qAhL4BJHoqxsNeqVtwq4HO5/Xxu /A3aTe02yLsLrWh6W664+K63QGjssG4SpB9i/XpXAdOrGBQGgto1jHYdvnB9/oMeTyjRfCRO8V3H DOMGcYTG/8FxnHkcZyK/tZV9fWUaOsTXPlS2QVzuQ5gXROY0tzlor51za9v8HzyQot8GNpp05VnP SjequelUkEAzk92uOfSKEy1vGNygCGiIvexnH3sbR3rrnFtFG/sCaoF4Wi+eO6teCIN2Uqvd+Axv O3LUIHcjqKEU28iHIxzJqBLCbAwH0butIZrrg3z8S694L/81PlFywvu6DQ7ZBOEVXxDGX8HxA+kH 5HG+YMtX2/5XlOIQFsIDsfzg2ztyRWGRdAbBAh72D3OiAiEGaKtRYlCHYgdxA6snEHNhMCm2EFln b1xnMF43EJqmF2iXG3vBMgY3fDRQfK3DVsjndso3EO4gd6WwMNP3QUzmZAbBUJokELyjbJiwdwdB D+NXfr4WXgqhfr5mYNYSc7C0bK+UCWoWbfdHeS+lc5e3D3ZzN9p2EGAhFuLyN+B2dOLmSwWhOEel ArtlEHpgW7zlGkzlFcElEEJQgW1IEPawCuDwFASRgbh3MDjQY32RTYAEfAtDQXtxggl3fK3DgkXW cIwxawX/0Wo0GH/nVRD8kAQ+WGtfUgoG0Q87CG/vEA7NIAvAVkZC2ATsN0SEJwsFYQ6w1AoDBkvP MxCuQH+RF4U7Z4uXx1NSlAeDaA82cikC8oXtAjjKQIajxxbIRIecUgQEAQR2Moip8Ib/QAoVCAOD eEAHQytWhTkCsW/KJRDwwEB8MSP9MDF7kWOEuBcoiEGIyI6EMSKL2HaO6IKuBi1jEDMjRBClYEI5 +A/TwDtE+A8JdUm31okFMQfrJzwABmD49Q6E1wUWsgmwpIrT9kptYCGcBUufRX/PRoW4iBBlIkUn wAM58YtiIYZeGIAEoQ1i8QLmAQ8GeIAJaIai0g+JsxoF/2QMvWUezzSB/3Bi8iYEL2k5/raBMNAb OGA5YoAG4sEMsbExUMJjaqVwawWPp9Z2RjBBAuEOcUd9BGFxMKOJAjENMdOP/QBlXzIFRtMP3/cl FNUzTEAFpdUPzmB+5hEJCUkQbUB4GCUQ1NBZTsMPXQBLKSUQ4jCYr+SKT1hzH1l5UlgQ+5B5UkQd MYEI1yGM8CAWKvADygAOoxCTMtlFf6AMqRBGtmUh/dACdmIDo5AK00RNwlWNMkAJq0AJ1oQwfuSN BpOM34QwfDQbBWcQgQiCh2hPKWiV3fWCcqcGjMB8EVcZJNgPSnZ9jnCPtcMEwfOPvFMGkYCWXxJ4 fHdCVP8QCQhpfhQZQ3k5EOZgfuzpQ29WkZ0Vn2swSxw5cx7pmLeIEJE5mZSZhQAIJwYRdAO4Gizw AqG5GqbZRSpQQFX1P3MhgQBUK2tUdQMkYwMBYzBQXP+QlL4ZA2JQJOKxjmWnjsWpgse5SM7ZfI04 d/RBEOEwcbUzBuOVBMHzD6WQSbyDOwXRlorCnnNgIXjpa2QmC+xpfhBpEK0Qn53VBUKkZo9pn/g3 hVGKEKhwhWYyHSwQIJwnjP/AkgPaFspQVCpQhqnwBwr6BwjxBw7KDO82EPCwRvTWgQOxjTCQQAri m3RECuKxCIMonFKZdsbpjjSAnAwHdypqBAZFGZWBLPz/9GpJEAX04AhL5n04+p26Fli8w5fIEqRX pmxEWqRNMAcB+VKIGZ9yMKrOcJ9S+qSpOqX6iQovcKUtiQreFowqWRBsgnQs4EtiSqb/YHp/hhDR 6C++1Kbx95qXIwO6t4nHBQPBB2+UcFyUcFA3phc1sAdI0hDDGQMiKmSAOqhtRQ+MIHdhQDP/wJxX QmUDUQ5jMHGVkA8D5Qjy6gjGNhD8UAremTPqahD8IAtUkKmWUK8CuRmRMKoCQQ+tUIpzILBfRw1x AEueEIuitJAB1n4Uu1PvcLEP4RE5gQra0KcGcRMd21r28AflggI/gAq9oQw50RNlRBRDQSslG0ZE MAog6OsVowBGRZAKEQOzraVAzCA5RVAElMAMumZ7i2YR8NBVz5of9DANU2FID/GJ4QCvE0EPxnK0 B2EtxZIt+OUoYBu2GWFHCCOnELG0fMGgYru2bNu2busZ3ECUN5sQyBBdvfe2eJu3eru3GFE53LR5 CMENH9g5Wsu3hnu4iKu32EhcpMAM58Ar8HAOyCAJ4rgXOAC4iZu5mru5jkJpVveb6zS3nDu6pFu6 K2EPWfW54lEDImq6rvu6sIsn0UpvsxEExFC4sZu7uru7DnEOq4AGHMo5nYMGq4C5vHu8yJu8ChG5 xqu8zlsSAQEAIfkEAAMAAAAsHgALAIgBJwAACP8A/wkcSLCgwYMIEypcyLChw4cQI0qcSLGixYsY M2rcyHHgt16KQvZi17GkyZMDwTFLxZKlNngT4bVcxc0eyps4c+rcmfBbHgtAgwJN0acewm9CLXAE d6Jp046oUEiVirOfMT0qsq7YynWFjT/gHMIrsgKG2bNh/606a7bg2rMxChKLQZfuzmNG8hphxLOv 34z1fCQdDDTZQaRClzp9yjHqVBQo7f1pkbWyiq6Yi6RN2E/GVrZtBb496xa03Lp2deLVy/ev69cO 2V0gTLuPQcRBFS+G+hiySWOULVfGTHyUQmNd2aIZODo0c9MEV6GOq1rvXtjYsxdkV6ECbdqKCuL/ BqrbKe/HJv8IrwykiHv3LYivKNIPIVmuMITwKWLsOdvS/0U33V3Wtabdga7t40J3QvWRzDffJNMH YSR5lFR5jG3k2FQd9QPEen9og5BM8XXFh31dFXEQM2i02CKApBHE4h407nEXDawhqKNffXTHIA9G bcdDUrZZmNhGTO3WWG8dqWfZHzYt1M8omKVy0H1bWRlRczAceAyOeRm445go1eNjdz7sg1A9KSQV 5D/jKYXkYicMtA842oCjZkPwgOPnQBtSxRmefta3UCqWtSCiQP0QmhAzmEVJEJYraAkRlxWdc041 mp7zUDznlBPPQF+CKeZB/bjjTjnuSMoQPe+8/1NOrBzFOis/EPnzjjmx+kMRrLyi+o4479zDkCJn VvDmQckklY2RuRHEjg/UUmvQtD4Moa14dP6zjx905rGsQdq88BgLqPwTqG8GgaOHVJb9sOhB9gSn Qgsw/dNPKvYCAZMx7xXxxz+QckXJQKO45xlXN7wno4svRgfdQCyiUeNB50gyXV2TeJrQMmDQIDIN YJTzT6k4nkrQNmpYl5ca2yhETylHHJHEzThX8o5F/FjCxM9Al9EMQ+HM0cTRSM8RDkL0bOK00wKZ 08YVVF/RhjkD8fNK1VRfrVAOZxaZ0D4p5KHIN+JdSFCct3W7Np3spEBnUylsVpAfvU31AyJMGv/E 91TrEWFoQURYlpaH6wHRD6Un/sNHV4ZSSlyX/sVYuXOiDVgQMxtvTAyqZ4wsOg2loEyDyvoy4rLL arg60DY1x47z7KVQFA7QuAOtxuAF0WM00sAfHYmvBb0T/D+vHM011eL8Y04Xy1fd/EH7JPssRWyv rfbbSnpEp9xzO5UvQevm3TdBf+S93g+8/2OPZcYJ9OF6KqRSpUD2dMWMQJJjRrloEwNggJijuYFw o3Od44ZBJjG60TlBdCqzRxhWt7on0KMg5YidBmeHs6FFpBm5CyET1HAQelAheChsQhtwRRDjAS95 wFueOKK3PBaKJ1njgkj2oEUebnVPIN8I3wn/ePCCufGgIPYwHw9YYD52CUQZeXvBD9YTv4E46V6G QhT9hsOVzQCBK/HrH2YkNkABWi5zqClIEKYThEWscTqTKAg3GkiDRdDxdAY5w+rC0DKXhYF3T9Bg zRzhCJtxMB8QoUcIy6CGEHpwIP0oAwrLIMngzaF4KWzCHH7XBBrSYWrLa8VhkmWRHQJxe977IZyM WCFwFHEx8/oH3h6Thz1pg4nn8xYupfKDw2HFMpLqh2W09D7LACEVo7AX5AZiv62oiGAsuUGKWkLG M6olgGopIMFQgwOPue+NdAFDQcwwOlEYynQiO9U2XHaGKNmjEi6rnUDcIchpEGQaHJSnQyCB/7sp 7Owf/Ggk0KhQkGYELxIs5McngueMFqJwEyykRxeQVrU5sNAcy2vDQXpByoqYEk6oBKLbUumUFOxJ IPAIF0FS8JgjEqQYeSMIFKfCAtdNsTJV1AYwBXJFFQxMIOCwzFZaQBBtcAUIBaGUpaqJuWuWMZtp HAgy3EiX/REEGdqMx+jiSBBVjO5UE9TLGdoHT+tEaRqCNEglbDYGR+iTIfzI3dIG8o7cmYxRVGAC 0iJhkEgAjwqDcyHS2sC7VgSPsARpxfIOgqwzlTKkH12lKoO4GEQYJA+LeUFKTvAYZRjEXOgZyLum 8lOZWkazPK3MDxhlGRvwbn6XmQ9BwNGVpP92ZanMxCamJBZVg7juHwfs7T+2MTrX2eOrBHGHy+5K kH64zJ7/UK4GHcHcf+SjfQ6ZRj/7aolmNOMdNrwd0Jpgw6wFb67/EOzRqFEQZwSPvQRxr/KuwKyO Yg+yIZWsebjnFLs9caTK4CyHDDLLAQtklyjwLBKFM5DCZUVLyoBfUoW6VNpuxQa25QpuBZIK3XpY uAg5BzHMsLGuik6ceYQgQVaTFycgRHV6qQT+8iLIIziiGe6oSClw54iHtAJ3lzwIJ5sgSoGotwn/ HIg5gpdkgYjjeLdJ1kkl8tHIUna/JG1KDpPUX4GgoikGJl8ue/MHVJj5zKgQTloMl9rKjI//f0KN ZTNlO6nbHqTDT92tf+qCEG6IgsQIpI5A7DiyRRyE0OkkCIzDhBAWGyEMAylrjWNXCfQ+xBG4eyRD IoG7IhvEsHula/Au6FDgkVrUwDsId86EtoXkIRlTPuWReCgn/mZIpKoEKp3S8mUBD+Eg6xoIPJr4 mPWsuTJRumlWDFIEobrqcVspLf/sbBA8W1PPAuRzc4mBg0ALF9F1PIjpxLRoI3DVII42AiT7OOnY jaG6DME00DS9EIH+jN4Dke/RgpxeKJcaaQY5MkIucKZDLCQbQXn1Sauc3yvfWr8P1/VieA1mFPza IMEGKrEBp+Z/BLUyA7EMEQwiHKJCskQr/4jlP5R6Zw/nGS6C1hegva3tQceg0OJW8UDK/dYVu6y5 xwhku2Nn6YXI+94PeUSmEWLQpKEa4JhMddShftkzuWAhExKKYWQdLVrHuhcjxbVTKjTbXXvZKYIq SMa9RWY0u/3MMPn4sgUi8oLo1DLP5DBXZNA+llfb5ddmS8xPsTEcLIIY3Ahuzf+xCLqIzNALFB3k BcIIMF1H3NaBtEHKUYowDP0JiGzI0Zkgi6TjrvQHkQXw+Gpkfz/9aAF3PUGSkazwHGUwC8evUFo9 EEWEHeInUPk/tAFgtDtxIH8Lc2/8mxC5qyDk7ClIT+s3kHppmNnULoi1m4ptp5ol5jNAjf8ZvPmP c2hTFY6ngRkOLfkViywvmldrgRRij22UQg01LnpCfAa0HhekH+U1EPz3M4+AEI8APJ4mcFMHewvY BAmxIGeydQXBJkSiPbPGdUDBewJxCL/ncCdgWXeTWcK2GCggfKAVZj/wGCAoU6igDOAwPsJUGYYi HIMDD+sxL180VNjld9oHeNw3MeaHGq4zF8JVDXUhMq7TD6Mzef9QDiOTF6Pyf05gHdAVXe4wDceQ YwVBTxqEbwihXUATBQYBhlPwCAUoENSQOwEIUD+DNOilgP/GgHHogAiRDclSAX1AdvuQDG3iJhbY dRhoARLoLeCDZWJHN8tCNovhByuFdhf/NxDaEFPIdy5T1g9MVBmlxWb/4GBZ8VPwYC+VERaL0xXM t3LZRxD283KqaDlBWBeu03jCBQ+oQQOf437tB0mic3k+Z1YCEVaMZhD4FzuPlA/eVYyhJxCKhDtF N3okJBBxhTuWYBADyASA9Xp0OIexJ3UIcQh32B084ALgkTYX+A/1kBQusCf7wANz40OLwQPoqI6w RBDggnaMiFIIlnb/MGyP8QMnlT4o4GYDoWzFIBCjUHKwJRypwAw2EFsrYFXYd33VVhaBt4rO0Yp0 IQqQJAobwzszd3MxIxDEtYQFUQq5WAqDMw3xRCrxxDtopUHM9Q6C1GT/gH9heGriBTRV//gP08gE b7VjS2eN2Uh1r7cErtaN3kEYYkNrBgGOQpEC1NIm62hrizEEeVCITeFSA1EPJIgCL6AtTXQ3eUME RHCC/6gH6KNa+LNFaqkVDZkQPIiKn/GDFPk//7AxQbAHi9BtG0N+indz6rcI5NRATKgvD/R+RuAE jDAJvthig9MPT+AyT8AIkul5GvQELRSTGKRBP+MIlmBvPxMFvPOMuEMFZphXuEMGvFNXeiWHQIlJ S/CaRLkQ3HiHSHkY+aUI32EBHDhZdDKPQsR8vSZgvcEDueQtKbhxKMACvHN3WRElWiQcQHCQJeeQ V3KKzIQfdOl9cnlGlEBzellVBQGL6f83MjjAQDhXEOeQixR0mFo4EMq1nkYgSNXFhbEjk/+gCjWm BCEEb/9wkyIENFJwakaGO9fYmi0Em6/ZEN/gA8lijtdzG/mVjrTxIB1IJ+koRApGYMY3FcqwdtVH lnnDAm92YJVhlm1WGTYADxFGP3+AXRmWJXeGnTCynZjTD2KAQDjADYRXFxjZXB0pOttgOoMpEPFQ mJZnHU4QhRj0mOsZOx/pnphpEDQjSEpQpVWqfwIRDlHwnz9DBgI6oLgTlKxpZAgamw3BDr1ALd3h Aj5wCBoIoeMoEPsgGELhAs/igezIGIhAJy9QioBScSiQAiLioeRzj1LRogdRkJUxL8r/UDhfYSjG 8CEtUAR6oAwu+pAwGpH4MaPZ2X390J3TsQcw0Zc40D79gH5HCAajIqQI0Q/HUJhIegyXqi+lwKSr UwpfGl1RGnBjQKVK4Ai52lyysKW5EwXN4KKqCTQBV6bLiqAIwg4hoQgPShH1UAxmJnzU06GogK0M AQ9opg2xRhDFlBUiWhEWdmE7Yg/IsAqrgAwjyhDqSgyIRxHusAzHcK/82apXeK/36g6zChH5MA3F GA5rmBDvUIzfRSYKu7AMkWaVUa4SAQ4otwJ+yrAWe7EYm7EMq2z3MpAQoUVcIW0aO7IkW7ImqxOW KBwvUAy/hUSpsJDDoTgnO7M0W7M2YxsR8MCxqjUKqeAnPotM0pkVMnuzRFu0Rkuz/fBLa7m0iHq0 Tvu0ULuwrrS0W2QD3Bq1WJu1WqsT4DAZVJsVlbq1Yju2ZHsTMjEKYhkcQEAEepAK2vCvZRu3cju3 dFu3NRsQAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAA CAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAA BAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAA LAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkE AAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+A AAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkc SLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAI CgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAE AAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAs AAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQA AwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AA ACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxI sOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgK AP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQA BAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwA AAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAAD AAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAA IfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw 4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA /wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAE AAAICgD/CRxIsOC/gAAAIfkEAAMAAAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAA AAAEAAQAAAgKAP8JHEiw4L+AAAAh+QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAAMA AAAsAAAAAAQABAAACAoA/wkcSLDgv4AAACH5BAADAAAALAAAAAAEAAQAAAgKAP8JHEiw4L+AAAAh +QQAAwAAACwAAAAABAAEAAAICgD/CRxIsOC/gAAAIfkEAMgAAAAsAAAAAAQABAAACAoA/wkcSLDg v4AAADs= ------=_NextPart_000_008D_01C1EEA9.B154E860-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 9:20:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dignus.com (sdsl-64-32-254-102.dsl.iad.megapath.net [64.32.254.102]) by hub.freebsd.org (Postfix) with ESMTP id F0D7A37B421 for ; Sun, 28 Apr 2002 09:20:11 -0700 (PDT) Received: from lakes.dignus.com (lakes.dignus.com [10.0.0.3]) by dignus.com (8.11.6/8.11.3) with ESMTP id g3SGG6A28539; Sun, 28 Apr 2002 12:16:06 -0400 (EDT) (envelope-from rivers@dignus.com) Received: (from rivers@localhost) by lakes.dignus.com (8.11.6/8.11.3) id g3SGHhV21902; Sun, 28 Apr 2002 12:17:43 -0400 (EDT) (envelope-from rivers) Date: Sun, 28 Apr 2002 12:17:43 -0400 (EDT) From: Thomas David Rivers Message-Id: <200204281617.g3SGHhV21902@lakes.dignus.com> To: freebsd-questions@freebsd.org, rivers@dignus.com Subject: Support organizations? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well - I was wondering if there are any ISVs, VARs, whatever that offer support contracts for FreeBSD... i.e. someone who can walk into an existing (small) shop and be the "help desk". I'm looking for solutions providers in the Raleigh NC area. - Many thanks! - - Dave Rivers - -- rivers@dignus.com Work: (919) 676-0847 Get your mainframe programming tools at http://www.dignus.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 9:21:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from creme-brulee.marcuscom.com (rdu57-17-158.nc.rr.com [66.57.17.158]) by hub.freebsd.org (Postfix) with ESMTP id 2F8BB37B400 for ; Sun, 28 Apr 2002 09:21:30 -0700 (PDT) Received: from shumai.marcuscom.com (marcus@shumai.marcuscom.com [192.168.1.4]) by creme-brulee.marcuscom.com (8.12.3/8.12.2) with ESMTP id g3SGKUwD009346; Sun, 28 Apr 2002 12:20:31 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: Galeon 1.2.1 problems From: Joe Marcus Clarke To: Zach Thompson Cc: questions@FreeBSD.ORG In-Reply-To: <20020428013144.A452@darwin.lastamericanempire.com> References: <20020428013144.A452@darwin.lastamericanempire.com> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-7L9BMBGqDDN/elb12vPe" X-Mailer: Ximian Evolution 1.0.3 Date: 28 Apr 2002 13:21:54 -0300 Message-Id: <1020010914.11181.6.camel@shumai.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=-7L9BMBGqDDN/elb12vPe Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sun, 2002-04-28 at 04:31, Zach Thompson wrote: >=20 > Is there a problem with Galeon and jdk13? If I go to a site that loads an > applet (e.g. home.planetarion.com), when I close Galeon the java_vm > process quickly starts to monopolize the cpu. >=20 > Before: >=20 > 19616 cublai 2 0 34496K 30112K poll 0:04 2.77% 2.69% galeon-= bin > 19623 cublai 18 0 99720K 20236K pause 0:02 3.58% 2.39% java_vm >=20 > After: >=20 > 19623 cublai 59 0 99908K 21672K RUN 1:26 96.79% 96.34% java_vm >=20 >=20 > I've uninstalled, reinstalled (WITH_FULL_MOZILLA), and removed the conf > dirs in ~ with no luck. Still the same result. I've had mixed luck with galeon and JPI 1.3. Lately, the results have been good depending on the applet I'm viewing. I have been able to view some quite complex RMI-based applets in Galeon without a problem.=20 However, I think the JPI is still in its developmental stages. You might want to work with Greg Lewis, the JDK maintainer, to see if you can troubleshoot your issues further. Joe >=20 > Zach Thompson >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message >=20 --=-7L9BMBGqDDN/elb12vPe Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEABECAAYFAjzMIaIACgkQb2iPiv4Uz4cefACfa543Q0CT13iF/PFpfwoV6OmR UUMAoKFlGeePJzy/P8TmVy5LmtT6M+lb =a01q -----END PGP SIGNATURE----- --=-7L9BMBGqDDN/elb12vPe-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 9:28:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cyberion.pl (cyberion.pl [212.127.82.2]) by hub.freebsd.org (Postfix) with SMTP id 6205137B41E for ; Sun, 28 Apr 2002 09:28:13 -0700 (PDT) Received: (qmail 5064 invoked from network); 28 Apr 2002 16:26:21 -0000 Received: from pd77.poznan.sdi.tpnet.pl (HELO najl) (nailer@213.76.221.77) by cyberion.pl with SMTP; 28 Apr 2002 16:26:21 -0000 Message-ID: <002b01c1eed1$d5ee14d0$0200a8c0@najl> From: "najl" To: Subject: help! Date: Sun, 28 Apr 2002 18:29:12 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0028_01C1EEE2.97F8D050" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0028_01C1EEE2.97F8D050 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I cant compile my kernel. It signals error during make command. Please help! Charles Bonenberg PS Sorry abaout my previous email, its bad addressed. ------=_NextPart_000_0028_01C1EEE2.97F8D050 Content-Type: text/plain; name="NAILWORK.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="NAILWORK.txt" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you = are # in doubt as to the purpose or necessity of a line, check first in = LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.34 2001/08/12 13:13:46 = joerg Exp $ machine i386 cpu I586_CPU ident NAILWORK maxusers 10 #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options IPFIREWALL #asd options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=3D10 options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=3D1000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory #options SYSVMSG #SYSV-style message queues #options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer=20 #options SYM_SETUP_LP_PROBE_MAP=3D0x40 # Allow ncr to attach legacy NCR devices when=20 # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines #options PCVT_SCANSET=3D2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device wx # Intel Gigabit Ethernet Card (``Wiseman'') device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? port 0x300 # Xircom Ethernet #device xe # PRISM I IEEE 802.11b wireless NIC. #device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below = will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. #device an # The probe order of these is presently determined by = i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet ------=_NextPart_000_0028_01C1EEE2.97F8D050-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 9:30:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from net2.dinoex.sub.org (net2.dinoex.de [212.184.201.182]) by hub.freebsd.org (Postfix) with ESMTP id 91F4937B400 for ; Sun, 28 Apr 2002 09:30:50 -0700 (PDT) Received: from net2.dinoex.sub.org (uucp@net2.dinoex.sub.org [127.0.0.1]) by net2.dinoex.sub.org (8.12.3/8.12.3) with ESMTP id g3SGUhat006192 for ; Sun, 28 Apr 2002 18:30:44 +0200 (CEST) (envelope-from matthias@mteege.de) X-MDaemon-Deliver-To: Received: (from uucp@localhost) by net2.dinoex.sub.org (8.12.3/8.12.3/Submit) with UUCP id g3SGUgEV006191 for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 18:30:42 +0200 (CEST) (envelope-from matthias@mteege.de) Received: (qmail 28845 invoked from network); 28 Apr 2002 16:07:08 -0000 Received: from ster.mteege.de (HELO gic.mteege.de) (192.168.0.9) by 0 with SMTP; 28 Apr 2002 16:07:08 -0000 Received: (from matthias@localhost) by gic.mteege.de (8.11.6/8.11.6) id g3SG4ew41500 for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 18:04:40 +0200 (CEST) (envelope-from matthias) Date: Sun, 28 Apr 2002 18:04:40 +0200 From: Matthias Teege To: freebsd-questions@freebsd.org Subject: Re: Clock adjustment? Message-ID: <20020428160440.GC41149@mteege.de> Reply-To: matthias@mteege.de Mail-Followup-To: Matthias Teege , freebsd-questions@freebsd.org References: <1019994343.437.63.camel@chowder.dons.net.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1019994343.437.63.camel@chowder.dons.net.au> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 09:15:41PM +0930, Daniel O'Connor wrote: > What is the correct procedure for adjusting the PC clock? One of my PC's > loses about 120s per week which is being corrected by ntpdate. I would > like to tune the clock if possible instead. Use ntpd for this task. Bis dann Matthias -- Matthias Teege -- matthias@mteege.de -- http://www.mteege.de make world not war PGP-Key auf Anfrage To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 9:42:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from orthanc.dolmant.net (res092117.halls.colostate.edu [129.82.92.117]) by hub.freebsd.org (Postfix) with ESMTP id 1F19937B41F for ; Sun, 28 Apr 2002 09:42:33 -0700 (PDT) Received: from mythran.dolmant.net (mythran.dolmant.net [10.0.0.3]) by orthanc.dolmant.net (8.12.3/8.12.2) with ESMTP id g3SGgnqT011245; Sun, 28 Apr 2002 10:42:49 -0600 (MDT) (envelope-from dolmant@dolmant.net) Content-Type: text/plain; charset="iso-8859-1" From: Matt Jibson Reply-To: dolmant@dolmant.net To: "najl" , Subject: Re: help! Date: Sun, 28 Apr 2002 10:42:15 -0600 X-Mailer: KMail [version 1.4] References: <002b01c1eed1$d5ee14d0$0200a8c0@najl> In-Reply-To: <002b01c1eed1$d5ee14d0$0200a8c0@najl> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204281042.15398.dolmant@dolmant.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I cant compile my kernel. It signals error during make command. I had a similar problem when I tried to upgrade to -stable with my=20 custom kernel config file. I had to re-create the file from GENERIC,=20 since stuff had been added to it. Thus I'd suggest re-creating your=20 custom kernel config file, and making sure that you don't remove any=20 required devices. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 10:25:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f180.pav2.hotmail.com [64.4.37.180]) by hub.freebsd.org (Postfix) with ESMTP id 39D3637B41C for ; Sun, 28 Apr 2002 10:25:35 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 10:25:35 -0700 Received: from 4.61.39.167 by pv2fd.pav2.hotmail.msn.com with HTTP; Sun, 28 Apr 2002 17:25:34 GMT X-Originating-IP: [4.61.39.167] From: "Frank -" To: questions@freebsd.org Subject: Re: Galeon 1.2.1 problems Date: Sun, 28 Apr 2002 17:25:34 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 28 Apr 2002 17:25:35.0162 (UTC) FILETIME=[B4CB49A0:01C1EED9] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG With it compiled using full mozilla, NOT mozilla-embedded... no java applets work at all, which is the same that happens when I try to view a java applet using Mozilla (understandable why it would be like that). When it IS compiled with mozilla-embedded, you can't view any https pages... so it's a toss up of what to use right now. >Is there a problem with Galeon and jdk13? If I go to a site that loads an >applet (e.g. home.planetarion.com), when I close Galeon the java_vm >process quickly starts to monopolize the cpu. Yeah I noticed that last night, it went up to 96% or so after closing galeon. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 10:58:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts10-srv.bellnexxia.net (tomts10.bellnexxia.net [209.226.175.54]) by hub.freebsd.org (Postfix) with ESMTP id 60E7237B419 for ; Sun, 28 Apr 2002 10:58:07 -0700 (PDT) Received: from there ([64.231.165.250]) by tomts10-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020428175801.BFLR25996.tomts10-srv.bellnexxia.net@there> for ; Sun, 28 Apr 2002 13:58:01 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Steve Brown To: freebsd-questions@freebsd.org Subject: jigdo-file for Linux won't run on FreeBSD Date: Sun, 28 Apr 2002 13:57:58 -0400 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020428175801.BFLR25996.tomts10-srv.bellnexxia.net@there> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, I'm trying to download the Debian CD image with jigsaw-download (jigdo http://home.in.tum.de/~atterer/jigdo/jigdo-bin-0.6.5.tar.bz2 as per instructions at jigdo homepage and debian.org). I'm running FreeBSD 4.5. It unpacks fine and jigdo-lite script seems to work to the point where it calls the binary, jigdo-file. when jigdo-file tries to run, I get the following message: $ ./jigdo-file ELF binary type "0" not known. Abort trap $ What's wrong? Thanks, Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 11: 0:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nelly.internal.irrelevant.org (irrelevant.demon.co.uk [158.152.220.121]) by hub.freebsd.org (Postfix) with ESMTP id 94BDD37B400 for ; Sun, 28 Apr 2002 11:00:18 -0700 (PDT) Received: from simond by nelly.internal.irrelevant.org with local (Exim 3.35 #1) id 171sxn-0000xq-00; Sun, 28 Apr 2002 18:59:55 +0100 Date: Sun, 28 Apr 2002 18:59:55 +0100 From: Simon Dick To: Steve Brown Cc: freebsd-questions@freebsd.org Subject: Re: jigdo-file for Linux won't run on FreeBSD Message-ID: <20020428175955.GF2078@irrelevant.org> References: <20020428175801.BFLR25996.tomts10-srv.bellnexxia.net@there> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020428175801.BFLR25996.tomts10-srv.bellnexxia.net@there> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 01:57:58PM -0400, Steve Brown wrote: > Hello all, > I'm trying to download the Debian CD image with jigsaw-download (jigdo > http://home.in.tum.de/~atterer/jigdo/jigdo-bin-0.6.5.tar.bz2 as per > instructions at jigdo homepage and debian.org). I'm running FreeBSD 4.5. > > It unpacks fine and jigdo-lite script seems to work to the point where it > calls the binary, jigdo-file. > > when jigdo-file tries to run, I get the following message: > > $ ./jigdo-file > ELF binary type "0" not known. > Abort trap > $ > > What's wrong? Try brandelf -t Linux jigdo-file -- Simon Dick simond@irrelevant.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 11:43:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 5396537B400 for ; Sun, 28 Apr 2002 11:43:21 -0700 (PDT) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 541A928BD6; Sun, 28 Apr 2002 14:43:20 -0400 (EDT) Date: Sun, 28 Apr 2002 14:43:20 -0400 (EDT) From: Peter Leftwich X-X-Sender: To: Justin Heath Cc: FreeBSD LIST Subject: Re: OpenSSH and hosts.allow In-Reply-To: <5.1.0.14.2.20020428071125.025b0160@mail.theplanet.com> Message-ID: <20020428143940.F48668-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002, Justin Heath wrote: > I am trying to set up sshd (OpenSSH) to use hosts.allow . The problem is that the rules seem to work with IP address but not host names. > Example - Works: sshd: 0.0.0.0: allow > Does not work: sshd: .domain.com: allow (nor) sshd: my.domain.com: allow > Any suggestions? Thanks. -Justin Heath Justin, Which version of OpenSSH (`sshd -v` this says illegal option, but then gives you the version on the next line of stderr output) are you using? What is the path to the hosts.allow file in your references? -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 11:58:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc52.attbi.com (rwcrmhc52.attbi.com [216.148.227.88]) by hub.freebsd.org (Postfix) with ESMTP id 96D6437B419 for ; Sun, 28 Apr 2002 11:58:13 -0700 (PDT) Received: from attbi.com ([24.128.40.215]) by rwcrmhc52.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020428185808.QRWB12183.rwcrmhc52.attbi.com@attbi.com> for ; Sun, 28 Apr 2002 18:58:08 +0000 Message-ID: <3CCC5403.4030001@attbi.com> Date: Sun, 28 Apr 2002 14:56:51 -0500 From: David Loszewski User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.7) Gecko/20020123 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: subscribe Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12: 2: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.ec.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id EEBC837B430 for ; Sun, 28 Apr 2002 12:01:43 -0700 (PDT) Received: from jennie ([66.26.7.34]) by mail6.ec.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Sun, 28 Apr 2002 12:00:45 -0400 Message-ID: <02cc01c1eecc$f44cd6a0$0301a8c0@ec.rr.com> From: "Michael Sharp" To: Subject: qmail / pop3d startup Date: Sun, 28 Apr 2002 11:54:17 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_02C9_01C1EEAB.6CFFB440" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_02C9_01C1EEAB.6CFFB440 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I installed qmail, qmailadmin, vpopmail, sqwebmail, checkpassword, = ezmlm, and ucspi from ports and all built fine. As directed in the qmail = port, I created a /var/qmail/rc script from /var/qmail/boot ( I tried = Maildir and home ). On starting the rc script, I get the following = error: qmail: 1019975240.167611 alert: cannot start, unable to read controls I then was successfully able to start the qmaild and pop3d via 2 = tcpserver commands as directed in /var/qmail/doc/FAQ, added a domain and = pop3 user in qmailadmin, but was unable to authenticate in sqwebmail. Anyway, I'm struggling, and the http://lifewithqmail.org manual is = written specifically for Redhat / Linux it seems. I would very much = appreciate it if someone can point me to some DOCs on using the above = ports in FreeBSD, or point out a rc script that works under FreeBSD, as = well as what needs to be in /var/qmail/control to get rid of the current = startup error. Thanks in advance, Michael Sharp ------=_NextPart_000_02C9_01C1EEAB.6CFFB440 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I installed qmail, qmailadmin, = vpopmail, sqwebmail,=20 checkpassword, ezmlm, and ucspi from ports and all built fine. As = directed in=20 the qmail port, I created a /var/qmail/rc script from /var/qmail/boot ( = I tried=20 Maildir and home ). On starting the rc script, I get the following=20 error:
 
qmail: 1019975240.167611 alert: cannot = start,=20 unable to read controls
 
I then was successfully able to start = the qmaild=20 and pop3d via 2 tcpserver commands as directed in /var/qmail/doc/FAQ, = added a=20 domain and pop3 user in qmailadmin, but was unable to authenticate in=20 sqwebmail.
 
Anyway, I'm struggling, and the http://lifewithqmail.org manua= l is=20 written specifically for Redhat / Linux it seems. I would very much = appreciate=20 it if someone can point me to some DOCs on using the above ports in = FreeBSD, or=20 point out a rc script that works under FreeBSD, as well as what needs to = be in=20 /var/qmail/control to get rid of the current startup error.
 
Thanks in advance,
Michael = Sharp
------=_NextPart_000_02C9_01C1EEAB.6CFFB440-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12: 6:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts22-srv.bellnexxia.net (tomts22.bellnexxia.net [209.226.175.184]) by hub.freebsd.org (Postfix) with ESMTP id E9E9B37B416 for ; Sun, 28 Apr 2002 12:06:52 -0700 (PDT) Received: from shall.anarcat.dyndns.org ([65.94.190.137]) by tomts22-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020428190646.CHNH19497.tomts22-srv.bellnexxia.net@shall.anarcat.dyndns.org>; Sun, 28 Apr 2002 15:06:46 -0400 Received: from lenny.anarcat.dyndns.org (lenny.anarcat.dyndns.org [192.168.0.4]) by shall.anarcat.dyndns.org (Postfix) with SMTP id 79F0C56; Sun, 28 Apr 2002 15:06:11 -0400 (EDT) Received: by lenny.anarcat.dyndns.org (sSMTP sendmail emulation); Sun, 28 Apr 2002 15:05:43 -0400 Date: Sun, 28 Apr 2002 15:05:43 -0400 From: The Anarcat To: freebsd-questions@freebsd.org Subject: portupgrade not always using PACKAGES as documented? Message-ID: <20020428190543.GA315@lenny.anarcat.dyndns.org> Mail-Followup-To: The Anarcat , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="uAKRQypu60I7Lcqm" Content-Disposition: inline User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --uAKRQypu60I7Lcqm Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi. I have a /usr/ports collection mounted via read-only NFS, so I had to hack a bit my config to have writable packages and distfiles directories. Here is the content of my make.conf: WRKDIRPREFIX=3D/usr/ports.local DISTDIR=3D/usr/ports.local/distfiles PACKAGES=3D/usr/ports.local/packages Now, I understand portupgrade isn't likely to parse that, so I included the modifs in pkgtools.conf too: ENV['PACKAGES'] ||=3D '/usr/ports.local/packages' ENV['PKG_PATH'] ||=3D ENV['PACKAGES'] + '/All' And now, pkg_fetch works well, but it seems portupgrade -P itself cannot find the package, why? ---> Identifying the package /usr/ports.local/packages/All/popt-1.5.1_1.tgz ---> Saved as /usr/ports.local/packages/All/popt-1.5.1_1.tgz ---> Skipping libiconv-1.7_3 (already installed) ---> Skipping gettext-0.11.1_1 (already installed) ---> Reporting the results (+:succeeded / -:ignored / *:skipped / !:failed) + popt-1.5.1_1 - libiconv-1.7_3 - gettext-0.11.1_1 ** Could not fetch the latest version '1.5.1_1' ---> Using the port instead of a package ---> Upgrading 'popt-1.5.1' to 'popt-1.5.1_1' (devel/popt) It's clear that pkg_fetch has successfully fetched the package and installed it! What am I doing wrong? A. --=20 =46rom the age of uniformity, from the age of solitude, from the age of Big Brother, from the age of doublethink - greetings! --uAKRQypu60I7Lcqm Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjzMSAYACgkQttcWHAnWiGcW0ACfe5mJ7nXDLt6DaQpeRehaoDwu 8dgAoKKFtmiWIPmtiTU+QTUZTyrdaS0i =X37M -----END PGP SIGNATURE----- --uAKRQypu60I7Lcqm-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12: 8: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c003.snv.cp.net (h016.c003.snv.cp.net [209.228.32.230]) by hub.freebsd.org (Postfix) with SMTP id 3486C37B417 for ; Sun, 28 Apr 2002 12:07:56 -0700 (PDT) Received: (cpmta 13598 invoked from network); 28 Apr 2002 12:07:55 -0700 Received: from 24.164.45.143 (HELO there) by smtp.telocity.com (209.228.32.230) with SMTP; 28 Apr 2002 12:07:55 -0700 X-Sent: 28 Apr 2002 19:07:55 GMT Content-Type: text/plain; charset="iso-8859-15" From: Chris Faulhaber To: freebsd-questions@freebsd.org Subject: Terminal problems with konsole and vim. Date: Sun, 28 Apr 2002 15:07:56 -0400 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020428190756.3486C37B417@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I'm having a strange terminal problem with a FreeBSD server of mine. I am connecting to the machine through SSH with a KDE konsole, and my terminal type is set to xterm-color. First of all, under vim, my home and end keys do not work properly. Vim likely interprets them as if I'd hit escape, because vim will exit insert mode when either of those keys are pressed. Second, and more importantly, the arrow keys do not function correctly when in insert mode. Up, down, right, and left place the letters A, B, C, and D, respectively, and a new line. My vim version is 6.0. I've tried back to version 4.0 and the most recent 6.1, but all exhibit this behaviour. The arrow-key problem appears to be a vim-only problem, as using them under insert mode in vi results in no problems (although the home and end keys still don't work). All of my non-FreeBSD servers do not have this problem. I've tried setting my term environment variable to xterm, xterm-color, xterm-xfree86, xterm-r6, vt100, vt220, ansi, and cons25. None fix the problem. I've also tried replacing my termcap with a termcap from one of my (non-FreeBSD) servers that do work. But after rebuilding the database, the problems still exist. Any help would most certainly be appreciated, Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:17:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from frontend2.aha.ru (bird.zenon.net [213.189.198.215]) by hub.freebsd.org (Postfix) with ESMTP id 1C77637B417; Sun, 28 Apr 2002 12:17:42 -0700 (PDT) Received: from [195.151.197.36] (HELO 127.0.0.1) by frontend2.aha.ru (CommuniGate Pro SMTP 3.5.9) with ESMTP-TLS id 117404058; Sun, 28 Apr 2002 23:17:40 +0400 Date: Sun, 28 Apr 2002 23:17:38 +0400 From: Anton Shcherbinin X-Mailer: The Bat! (v1.53d) X-Priority: 3 (Normal) Message-ID: <1411696390.20020428231738@fastmail.fm> To: Greg 'groggy' Lehey Cc: freebsd-questions@freebsd.org Subject: IPv6: how can I get rid of it? In-Reply-To: <20020428104538.B83112@wantadilla.lemis.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sunday, April 28, 2002, 5:15:39, Greg 'groggy' Lehey wrote: > On Saturday, 27 April 2002 at 16:32:28 -0400, Joe & Fhe Barbish wrote: >> On Saturday, April 27, 2002 1:36 PM, Anton Shcherbinin wrote: >>> >>> I installed FreeBSD 4.5 Release. When my host is trying to connect to >>> any other host specified by name, I experience a huge (1.5 minutes) >>> delay before the hosts are connected. For example, suppose I want to get >>> http://yahoo.com/ page. I write: >>> >>> $ telnet yahoo.com 80 >>> >>> At the same time (actually, a bit earlier), I wrote at another console >>> as root: >>> >>> # tcpdump -n >>> >>> And here is tcpdump's output (a bit edited for clarity): >>> >>> 18:37:51.501962 my_host.1055 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) >>> 18:37:56.512212 my_host.1056 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) >>> 18:38:06.522353 my_host.1057 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) >>> 18:38:26.532655 my_host.1058 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) >>> 18:39:06.543281 my_host.1059 > our_DNS_server.53: 4487+ A? yahoo.com. (27) >>> 18:39:06.683069 our_DNS_server.53 > my_host.1059: 4487* 2/5/5 A 66.218.71.113, (238) >>> 18:39:06.683609 my_host.1028 > yahoo.com.80: S 2162865409:2162865409(0) win 65535 (DF) [tos 0x10] >>> 18:39:06.909922 yahoo.com.80 > my_host.1028: S 2552035614:2552035614(0) ack 2162865410 win 65535 >>> 18:39:06.909984 my_host.1028 > yahoo.com.80: . ack 1 win 33304 (DF) [tos 0x10] >>> >>> That is, my host tries to resolve yahoo.com at our DNS server, *but* it >>> looks for 'AAAA' RR, and not 'A'. It gets no reply, and in 5 seconds it >>> retries the query (again, 'AAAA' RR). No reply again, it retries in 10 >>> seconds, then again in 20 seconds. No reply within 40 seconds. >>> *FINALLY*, my host asks DNS server for 'A' RR for yahoo.com . And no >>> wonder that in several milliseconds DNS server tells my host yahoo.com's >>> IP address. Then, within several milliseconds, my host and yahoo.com >>> become TCP-connected. >>> >>> As you can see, I had to waste 5+10+20+40==75 seconds watching my host >>> try to find nonexistent AAAA resource record. And things are the same if >>> I try to send mail or to connect to ftp site or whatever else. >>> >>> What have I done wrong? What should I do? Thanks a lot for any ideas. >>> >>> I general, what are AAAA records? RFC1034/1035 say nothing about >>> such RR. What TFM should I read about them? > They're address records for IPV6. Thank you, Greg. It makes things much clearer. > So what's the problem? I really don't know. Does this only happen > with telnet? Only with yahoo.com? As I have already said, the same happens with any application and any host. E. g., with ftp and ftp.freebsd.org : 1) my host queries our DNS server for AAAA record of ftp.freebsd.org 2) query times out in 5 secs 3) the same query 4) query times out in 10 secs 5) the same query 6) query times out in 20 secs 7) the same query 8) query times out in 40 secs 9) the same query, *but* for A record; DNS server replies in some ms, and then everything goes great, my host quickly connects to ftp.freebsd.org:21 etc. How can I fix that? The only thing I could think of is to disable IPv6 at all. But wait a second: $ grep -i ipv6_enable /etc/rc* /etc/defaults/* /etc/rc:case ${ipv6_enable} in /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. ^^^^^^^^^^^^^^^^ Does not it mean that IPv6 is already disabled? On the other hand: $ ifconfig -u rl0: flags=8843 mtu 1500 inet 10.10.10.9 netmask 0xffffff00 broadcast 10.10.10.255 inet6 fe80::2c0:26ff:fea5:b640%rl0 prefixlen 64 scopeid 0x1 ether 00:c0:26:a5:b6:40 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 Both interfaces have IPv6 (inet6) addresses. I deal with IPv6 the 1st time in my life. I just understand nothing. :-( What should I do? I am ready to give you any additional info about my FBSD configuration. Many thanks in advance. -- Anton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:24:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 0E09537B405 for ; Sun, 28 Apr 2002 12:24:54 -0700 (PDT) Received: from user-119a2km.biz.mindspring.com ([66.149.10.150] helo=scee.dsj.net) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 171uHx-0003bk-00 for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 12:24:49 -0700 Received: from dsj by scee.dsj.net with local (Exim 3.35 #1 (Debian)) id 171uI3-0006QM-00 for ; Sun, 28 Apr 2002 15:24:55 -0400 Date: Sun, 28 Apr 2002 15:24:55 -0400 From: "David S. Jackson" To: freebsd-questions@freebsd.org Subject: make installkernel KERNEL=MYKERNEL? Message-ID: <20020428192455.GA24569@scee.dsj.net> Reply-To: "David S. Jackson" Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm a little confused by the instructions in chapter 9 of the handbook on the "new" way to make/install a new kernel: Note: In FreeBSD 4.2 and older you must replace KERNCONF= with KERNEL=. 4.2-STABLE that was fetched after Feb 2nd, 2001 does recognize KERNCONF=. In the previous example in the explanation, the custom kernel is called MYKERNEL, but in the note is it called 4.2-STABLE? or can it be called MYKERNEL? The note seems a little ambiguous for someone who doesn't know explicitly what the note is saying beforehand. I think it means make installkernel KERNEL=MYKERNEL but am I right? Is this line correct? -- David S. Jackson dsj@dsj.net =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= My friend has a baby. I'm writing down all the noises he makes so later I can ask him what he meant. -- Steven Wright To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:26: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp21.singnet.com.sg (smtp21.singnet.com.sg [165.21.101.201]) by hub.freebsd.org (Postfix) with ESMTP id CD9F637B404 for ; Sun, 28 Apr 2002 12:26:04 -0700 (PDT) Received: from pike.singnet.com.sg (pike.singnet.com.sg [165.21.101.112]) by smtp21.singnet.com.sg (8.12.3/8.12.3) with ESMTP id g3SJQ3aO025641 for ; Mon, 29 Apr 2002 03:26:03 +0800 Received: (from cooluser@localhost) by pike.singnet.com.sg (8.9.3/8.9.3) id DAA11729 for freebsd-questions@FreeBSD.ORG; Mon, 29 Apr 2002 03:26:03 +0800 X-Authentication-Warning: pike.singnet.com.sg: cooluser set sender to limdorj@singnet.com.sg using -f To: freebsd-questions@FreeBSD.ORG Subject: unrecognised FBSD box in other windows client Message-ID: <1020021963.3ccc4ccb3099b@pike.singnet.com.sg> Date: Mon, 29 Apr 2002 03:26:03 +0800 (SGT) From: Zhifu Reply-To: limdorj@singnet.com.sg MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: SingNet WebMail Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I am running a FreeBSD box (hostname: box1.network.edu.sg) in a Windows network environment. The network assigns IP addresses dynamically. I have set my etc/hosts 127.0.0.1 localhost 155.69.10.20 box1.network.edu.sg box1 etc/rc.conf hostname="box1.network.edu.sg" ifconfig="DCHP" Problem 1) IP address keeps changing. I need to keep updating my /etc/hosts file. 2) I cannot ping box1 from another windows machine (box2) and from box2 to box1. Why is that so? Thanx in advance. Zhifu (newbie) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:27:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 23C8B37B404; Sun, 28 Apr 2002 12:27:25 -0700 (PDT) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id B161828B17; Sun, 28 Apr 2002 15:27:24 -0400 (EDT) Date: Sun, 28 Apr 2002 15:27:24 -0400 (EDT) From: Peter Leftwich X-X-Sender: To: Anton Shcherbinin Cc: Greg 'groggy' Lehey , FreeBSD LIST Subject: Re: IPv6: how can I get rid of it? In-Reply-To: <1411696390.20020428231738@fastmail.fm> Message-ID: <20020428152315.O49612-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002, Anton Shcherbinin wrote: > Sunday, April 28, 2002, 5:15:39, Greg 'groggy' Lehey wrote: > > On Saturday, 27 April 2002 at 16:32:28 -0400, Joe & Fhe Barbish wrote: > >> On Saturday, April 27, 2002 1:36 PM, Anton Shcherbinin wrote: > >>> I installed FreeBSD 4.5 Release. When my host is trying to connect to > >>> any other host specified by name, I experience a huge (1.5 minutes) > >>> delay before the hosts are connected. For example, suppose I want to get > >>> http://yahoo.com/ page. I write: > >>> $ telnet yahoo.com 80 > >>> > >>> At the same time (actually, a bit earlier), I wrote at another console > >>> as root: > >>> # tcpdump -n > >>> And here is tcpdump's output (a bit edited for clarity): > >>> 18:37:51.501962 my_host.1055 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:37:56.512212 my_host.1056 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:06.522353 my_host.1057 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:26.532655 my_host.1058 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:39:06.543281 my_host.1059 > our_DNS_server.53: 4487+ A? yahoo.com. (27) > >>> 18:39:06.683069 our_DNS_server.53 > my_host.1059: 4487* 2/5/5 A 66.218.71.113, (238) > >>> 18:39:06.683609 my_host.1028 > yahoo.com.80: S 2162865409:2162865409(0) win 65535 (DF) [tos 0x10] > >>> 18:39:06.909922 yahoo.com.80 > my_host.1028: S 2552035614:2552035614(0) ack 2162865410 win 65535 > >>> 18:39:06.909984 my_host.1028 > yahoo.com.80: . ack 1 win 33304 (DF) [tos 0x10] > >>> > >>> That is, my host tries to resolve yahoo.com at our DNS server, *but* it > >>> looks for 'AAAA' RR, and not 'A'. It gets no reply, and in 5 seconds it > >>> retries the query (again, 'AAAA' RR). No reply again, it retries in 10 > >>> seconds, then again in 20 seconds. No reply within 40 seconds. > >>> *FINALLY*, my host asks DNS server for 'A' RR for yahoo.com . And no > >>> wonder that in several milliseconds DNS server tells my host yahoo.com's > >>> IP address. Then, within several milliseconds, my host and yahoo.com > >>> become TCP-connected. > >>> > >>> As you can see, I had to waste 5+10+20+40==75 seconds watching my host > >>> try to find nonexistent AAAA resource record. And things are the same if > >>> I try to send mail or to connect to ftp site or whatever else. > >>> > >>> What have I done wrong? What should I do? Thanks a lot for any ideas. > >>> > >>> I general, what are AAAA records? RFC1034/1035 say nothing about > >>> such RR. What TFM should I read about them? > > They're address records for IPV6. > Thank you, Greg. It makes things much clearer. > > > So what's the problem? I really don't know. Does this only happen > > with telnet? Only with yahoo.com? > As I have already said, the same happens with any application and any > host. E. g., with ftp and ftp.freebsd.org : > 1) my host queries our DNS server for AAAA record of ftp.freebsd.org > 2) query times out in 5 secs > 3) the same query > 4) query times out in 10 secs > 5) the same query > 6) query times out in 20 secs > 7) the same query > 8) query times out in 40 secs > 9) the same query, *but* for A record; DNS server replies in some ms, > and then everything goes great, my host quickly connects > to ftp.freebsd.org:21 etc. > > How can I fix that? > The only thing I could think of is to disable IPv6 at all. But wait a > second: > > $ grep -i ipv6_enable /etc/rc* /etc/defaults/* > /etc/rc:case ${ipv6_enable} in > /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. > > ^^^^^^^^^^^^^^^^ > Does not it mean that IPv6 is already disabled? Check in both /etc/rc.conf and /etc/defaults/rc.conf -- your /etc/rc.conf file overrides anything that is set in the /defaults/ version of the same. > On the other hand: > $ ifconfig -u > rl0: flags=8843 mtu 1500 > inet 10.10.10.9 netmask 0xffffff00 broadcast 10.10.10.255 > inet6 fe80::2c0:26ff:fea5:b640%rl0 prefixlen 64 scopeid 0x1 > ether 00:c0:26:a5:b6:40 > media: Ethernet autoselect (100baseTX ) > status: active > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > > Both interfaces have IPv6 (inet6) addresses. > > I deal with IPv6 the 1st time in my life. I just understand nothing. > :-( > What should I do? I am ready to give you any additional info about my FBSD configuration. Many thanks in advance. -Anton From `man -k ipv6` ip6(4) - Internet Protocol version 6 (IPv6) ip6fw(8) - controlling utility for IPv6 firewall The online handbook probably has a good description of enabling, understanding, and disabling IPV6 (think of the IP addresses of the future as 10.3.2.1.0.100 beyond 10.3.2.1). The url is http://www.freebsd.org -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:33:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc54.attbi.com (rwcrmhc54.attbi.com [216.148.227.87]) by hub.freebsd.org (Postfix) with ESMTP id BA7A137B400 for ; Sun, 28 Apr 2002 12:33:20 -0700 (PDT) Received: from attbi.com ([24.128.40.215]) by rwcrmhc54.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020428193320.SPQA20384.rwcrmhc54.attbi.com@attbi.com> for ; Sun, 28 Apr 2002 19:33:20 +0000 Message-ID: <3CCC5C43.8050001@attbi.com> Date: Sun, 28 Apr 2002 15:32:03 -0500 From: David Loszewski User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.7) Gecko/20020123 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions Subject: samba audio with video Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My samba is working fine, access wise and all but when I have an avi file or mpg file (any movie file) that is supposed to have audio to it on the client's machine it will only display the video and will have no audio. Is there something I need to do to have the audio played as well? I'm currently running FreeBSD 4.5 Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:41:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.114.66.201]) by hub.freebsd.org (Postfix) with ESMTP id C16CD37B405; Sun, 28 Apr 2002 12:41:39 -0700 (PDT) Received: from tomsk (tomsk [66.114.66.202]) by omsk.mushinsky.net (8.11.6/8.11.6) with ESMTP id g3SJfKE11877; Sun, 28 Apr 2002 15:41:20 -0400 (EDT) (envelope-from imush@math.berkeley.edu) From: "Isaac Mushinsky" To: Cc: Subject: help! can't build kde3 Date: Sun, 28 Apr 2002 15:41:26 -0400 Message-ID: <000801c1eeec$afe30d70$ca427242@mushinsky.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG While building kdenetwork3 during configure I get prompts as below, and then a make error. It does not seem to matter whether I answer yes or no to these questions. The prompts also came up during the build of kdelibs/kdebase, but then they built successfully. Please help! >checking target system type... i386-portbld-freebsd4.5 >remove conftest.sed? y >checking for a BSD-compatible install... /usr/bin/install -c ............ and then many times >checking for BSD-compatible nm... /usr/bin/nm -B >checking for a sed that does not truncate output... overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y ... >overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y , and finally a make error: checking whether ln -s works... yes autoheader: `config.h.in' is updated cd . \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ /usr/local/bin/bash ./config.status config.status: creating config.h config.status: executing default-1 commands gmake all-recursive gmake[1]: Entering directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' Making all in mimelib gmake[2]: Entering directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' cd .. && \ CONFIG_HEADERS= CONFIG_LINKS= \ CONFIG_FILES=mimelib/Makefile /bin/sh ./config.status config.status: creating mimelib/Makefile config.status: executing default-1 commands gmake[2]: Leaving directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' gmake[2]: Entering directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' Makefile:422: *** missing separator. Stop. gmake[2]: Leaving directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' gmake: *** [all-recursive-am] Error 2 *** Error code 2 Stop in /usr/ports/net/kdenetwork3. kdenetwork3> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:54:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tata.cluebie.net (tata.cluebie.net [207.229.162.185]) by hub.freebsd.org (Postfix) with ESMTP id BF0C937B41D for ; Sun, 28 Apr 2002 12:54:42 -0700 (PDT) Received: by tata.cluebie.net (Postfix, from userid 10000) id 23AAE20D; Sun, 28 Apr 2002 14:54:42 -0500 (CDT) Date: Sun, 28 Apr 2002 14:54:42 -0500 From: "A. Blake Cooper" To: freebsd-questions@freebsd.org Subject: booting from mylex acceleraid 250 Message-ID: <20020428195442.GC41181@tata.cluebie.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am attempting to install 4.5-release on a box that has the following configuration: mylex acceleraid 250(latest sw/fw/bios), (3) 9GB Seagate ST39102LW drives, mylex bios geometry set to 2GB. The array consists of all 3 drives and there is 1 logical drive created that I believe is 24GB. From sysinstall fdisk I choose 'A' entire disk, which creates a small area at the front of the drive, the large data area, then a small area at the end of the drive. Note that I do not get any warning/notice about dangerously dedicated. Disk is labeled with the first partition being the root partition and the size being 150MB. The install completes successfully and upon reboot, booting off the newly created disk, I get 'Operating system missing'. I attemped putting the controller and the drives in some other systems with the same results. I also attempted to install the freebsd boot manager, which yields a 'F1' and then just beeps when you press F1. Making it appear that the MBR cannot run the second stage of the booting process. Any thoughts are appreciated. Thanks, Blake -- - A. Blake Cooper To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 12:57:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tisch.mail.mindspring.net (tisch.mail.mindspring.net [207.69.200.157]) by hub.freebsd.org (Postfix) with ESMTP id D4DBA37B427 for ; Sun, 28 Apr 2002 12:57:45 -0700 (PDT) Received: from bronx-e0.atl2.mindspring.net ([207.69.162.119] helo=mail.mindspring.com) by tisch.mail.mindspring.net with esmtp (Exim 3.33 #1) id 171uJc-0000pF-00 for questions@FreeBSD.org; Sun, 28 Apr 2002 15:26:32 -0400 Received: (from root@localhost) by mail.mindspring.com (8.10.2+Sun/8.10.2) id g3SBaRd26003; Sun, 28 Apr 2002 07:36:27 -0400 (EDT) Date: Sun, 28 Apr 2002 07:36:27 -0400 (EDT) Message-Id: <200204281136.g3SBaRd26003@mail.mindspring.com> To: questions@FreeBSD.org From: support@mindspring.com Subject: Support Email Request was too long Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The email that you submitted to MindSpring support was too long for us to process. Please try to submit a smaller message or break your message into multiple email messages. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13: 3:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 4ED8C37B41B for ; Sun, 28 Apr 2002 13:03:18 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id NAA02358; Sun, 28 Apr 2002 13:03:12 -0700 Message-ID: <3CCC557F.30207@owt.com> Date: Sun, 28 Apr 2002 13:03:11 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: "David S. Jackson" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: make installkernel KERNEL=MYKERNEL? References: <20020428192455.GA24569@scee.dsj.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG David S. Jackson wrote: > Hi, > > I'm a little confused by the instructions in chapter 9 of the handbook > on the "new" way to make/install a new kernel: > > Note: In FreeBSD 4.2 and older you must replace KERNCONF= with KERNEL=. > 4.2-STABLE that was fetched after > Feb 2nd, 2001 does recognize KERNCONF=. > > In the previous example in the explanation, the custom kernel is called > MYKERNEL, but in the note is it called 4.2-STABLE? or can it be called > MYKERNEL? The note seems a little ambiguous for someone who doesn't > know explicitly what the note is saying beforehand. I think it means > > make installkernel KERNEL=MYKERNEL > > but am I right? Is this line correct? > Up to a point and then I am not sure whether you are lost and wandering in a desert somewhere. You have to have a file called MYKERNEL, which started out as a copy of GENERIC. If you need help, comment out the options you don't want to use. Otherwise, figuring out a kernel config problem should be a payment required situation. MYKERNEL's are all named after the computer they are on such as RUBY, CORAL, JADE, and etc. The easy way to deal with it is to add something to /etc/make.conf like KERNCONF=CORAL Then, all you have to do is "make kernel" and it will build and install your kernel. I think the chapter in the Handbook covers this pretty well. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13: 4:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f103.law9.hotmail.com [64.4.9.103]) by hub.freebsd.org (Postfix) with ESMTP id 276E937B417 for ; Sun, 28 Apr 2002 13:04:15 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 13:04:15 -0700 Received: from 68.50.137.180 by lw9fd.law9.hotmail.msn.com with HTTP; Sun, 28 Apr 2002 20:04:14 GMT X-Originating-IP: [68.50.137.180] From: "Tom Hines" To: questions@freebsd.org Subject: libintl.so.1 not found Date: Sun, 28 Apr 2002 16:04:14 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 28 Apr 2002 20:04:15.0059 (UTC) FILETIME=[DF184A30:01C1EEEF] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I've been getting this error a lot when trying to build ports and also when I reboot my computer and startx. I know the file is provided by gettext, but I have the latest installed, gettext-0.11.1_1, which installs libintl.so.2. I tried symlinking libintl.so.1 -> libintl.so.2, which works temporarily, but the symlink gets deleted after rebooting and after building a port. I tried ldconfig with no parameters, which totally emptied the hints file for shared libs. I thought it was supposed to default to -R, which supposedly rescans the configured directories. I had to reboot and am still not sure it's back to the way it was, but things seem to be working. Couple of questions: 1) How do I tell the system I have libintl.so.2 installed and not libintl.so.1? 2) Who is deleting my symlink and why? 3) Why does ldconfig screw up your configuration when you run it w/o parameters, and how should I have run it instead? Thanks. Tom Hines _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13: 8: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by hub.freebsd.org (Postfix) with ESMTP id 3DB7E37B417 for ; Sun, 28 Apr 2002 13:07:49 -0700 (PDT) Disposition-notification-to: dnpowers@swbell.net Received: from daveabit ([64.218.67.41]) by mta4.rcsntx.swbell.net (iPlanet Messaging Server 5.1 (built May 7 2001)) with SMTP id <0GVA00LY2NWZRO@mta4.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 15:07:48 -0500 (CDT) Date: Sun, 28 Apr 2002 15:07:49 -0500 From: David Powers Subject: RE: Cannot configure Netgear FA410TX in Compaq Prosignia 150 Laptop In-reply-to: To: "'Blane R. Boynton'" , freebsd-questions@freebsd.org Message-id: <000e01c1eef0$5fef6210$0401a8c0@daveabit> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Content-type: multipart/alternative; boundary="Boundary_(ID_AkjDPznjPRp134lk6p972g)" Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --Boundary_(ID_AkjDPznjPRp134lk6p972g) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 8BIT It is possible that you may find the answer to your problem in the FreeBSDDiary article.   HYPERLINK "http://www.freebsddiary.org/last-netgear.php"http://www.freebsddiary.org/la st-netgear.php     -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Blane R. Boynton Sent: Sunday, April 28, 2002 9:41 AM To: freebsd-questions@freebsd.org Subject: Cannot configure Netgear FA410TX in Compaq Prosignia 150 Laptop Greetings All,   I have been having a problem whereby I cannot make my NETGEAR FA410TX PCMCIA NIC configure in my Compaq Prosignia 150 laptop. I have made the appropriate changes to rc.conf, such as adding “pccard_enable=”YES” and the card is recognized on boot, but no matter what I do I cannot get it to configure. The card is always placed on IRQ 3 when pccardd recognizes it, which I believe is causing an IRQ conflict with my CardBus to PCI bridge, which also happens to make use of IRQ 3. I have made changes to /etc/pccard.conf such that IRQ’s 3 and 5 are excluded from the distribution list, however pccardd still allocates the card to IRQ 3 regardless of the IRQ list settings I specify. I have read up on the list and seen this problem before, I have tried a couple solutions, I even went as far as to use “pccardc enabler” with a forced IRQ setting via the –i flag, the card still configs at IRQ3, even when I tell it manually to use another IRQ such as 10.   I have also tried to get my Linksys PCMPC100V3 card to work, which is supported in pccard.conf, yet I get the same problem. The card is recognized, configured on IRQ 3 and then when I try to config it manually or via DHCP I get the same error as I got above “/kernel ed: device timeout”.   If anyone can help I would appreciate that you would CC me in any and all replies.   Thanks in Advance,   Blane Boynton Bboynton@u.arizona.edu --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.350 / Virus Database: 196 - Release Date: 4/17/2002 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.350 / Virus Database: 196 - Release Date: 4/17/2002 --Boundary_(ID_AkjDPznjPRp134lk6p972g) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT
It is possible that you may find the answer to your problem in the FreeBSDDiary article.
 
 
 
-----Original Message-----
From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Blane R. Boynton
Sent: Sunday, April 28, 2002 9:41 AM
To: freebsd-questions@freebsd.org
Subject: Cannot configure Netgear FA410TX in Compaq Prosignia 150 Laptop

Greetings All,

 

I have been having a problem whereby I cannot make my NETGEAR FA410TX PCMCIA NIC configure in my Compaq Prosignia 150 laptop. I have made the appropriate changes to rc.conf, such as adding "pccard_enable="YES" and the card is recognized on boot, but no matter what I do I cannot get it to configure. The card is always placed on IRQ 3 when pccardd recognizes it, which I believe is causing an IRQ conflict with my CardBus to PCI bridge, which also happens to make use of IRQ 3. I have made changes to /etc/pccard.conf such that IRQ's 3 and 5 are excluded from the distribution list, however pccardd still allocates the card to IRQ 3 regardless of the IRQ list settings I specify. I have read up on the list and seen this problem before, I have tried a couple solutions, I even went as far as to use "pccardc enabler" with a forced IRQ setting via the -i flag, the card still configs at IRQ3, even when I tell it manually to use another IRQ such as 10.

 

I have also tried to get my Linksys PCMPC100V3 card to work, which is supported in pccard.conf, yet I get the same problem. The card is recognized, configured on IRQ 3 and then when I try to config it manually or via DHCP I get the same error as I got above "/kernel ed: device timeout".

 

If anyone can help I would appreciate that you would CC me in any and all replies.

 

Thanks in Advance,

 

Blane Boynton

Bboynton@u.arizona.edu


---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.350 / Virus Database: 196 - Release Date: 4/17/2002


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.350 / Virus Database: 196 - Release Date: 4/17/2002

--Boundary_(ID_AkjDPznjPRp134lk6p972g)-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:12:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mallard.duc.auburn.edu (mallard2.duc.auburn.edu [131.204.2.23]) by hub.freebsd.org (Postfix) with ESMTP id 1568737B417 for ; Sun, 28 Apr 2002 13:12:17 -0700 (PDT) Received: from localhost (kokostm@localhost) by mallard.duc.auburn.edu (8.9.3/8.9.3) with SMTP id PAA11698 for ; Sun, 28 Apr 2002 15:12:16 -0500 (CDT) X-Authentication-Warning: mallard.duc.auburn.edu: kokostm owned process doing -bs Date: Sun, 28 Apr 2002 15:12:16 -0500 (CDT) From: Todd M Kokoszka X-Sender: kokostm@mallard To: freebsd-questions@freebsd.org Subject: pkg_* malfunctioning Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have two problems with pkg_delete. I upgraded a version of dillo that I had using pkg_upgrade and following this, a shared object in the elf.so library is can't be found. I believe it's object libintl.so. Why did this happen? Some programs won't load because they need that shared object. If I pkg_delete and pkg_install the programs they work fine. What can I do so that I don't have to do this for my entire system? 2nd more egregious problem. As noted above, I had to reinstall gnucash. It told me that python 2.2.1 wasn't installed (by install I always mean pkg_add). I installed it and pkg_info told me that I have two versions of it installed. I wanted to clear that up, so I iuninstalled 1. I then added a directory in the /appropriate var directory to try and dupe pkg_delete into thinking it could delete the 2nd one. Following this episode, something deleted a significant number of packages on my system. I didn't find out until rebooting that it also deleted bash which is my shell. I can't log onto the system because the system can't find bash. Why did the packages tools delete all these other packages and what can be done to stop it? Thanks, Todd To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:13:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from shumai.marcuscom.com (rdu57-17-158.nc.rr.com [66.57.17.158]) by hub.freebsd.org (Postfix) with ESMTP id 6503A37B404 for ; Sun, 28 Apr 2002 13:13:42 -0700 (PDT) Received: from shumai.marcuscom.com (marcus@localhost.marcuscom.com [127.0.0.1]) by shumai.marcuscom.com (8.12.3/8.12.2) with ESMTP id g3SKE76L029063; Sun, 28 Apr 2002 16:14:07 -0400 (EDT) (envelope-from marcus@marcuscom.com) Received: from localhost (marcus@localhost) by shumai.marcuscom.com (8.12.3/8.12.3/Submit) with ESMTP id g3SKE70t029060; Sun, 28 Apr 2002 16:14:07 -0400 (EDT) X-Authentication-Warning: shumai.marcuscom.com: marcus owned process doing -bs Date: Sun, 28 Apr 2002 16:14:07 -0400 (EDT) From: Joe Clarke To: Tom Hines Cc: questions@FreeBSD.ORG Subject: Re: libintl.so.1 not found In-Reply-To: Message-ID: <20020428161229.Y11912-100000@shumai.marcuscom.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG PGP Key : http://www.marcuscom.com/pgp.asc On Sun, 28 Apr 2002, Tom Hines wrote: > Hi. I've been getting this error a lot when trying to build ports and also > when I reboot my computer and startx. I know the file is provided by > gettext, but I have the latest installed, gettext-0.11.1_1, which installs > libintl.so.2. I tried symlinking libintl.so.1 -> libintl.so.2, which works > temporarily, but the symlink gets deleted after rebooting and after building > a port. I tried ldconfig with no parameters, which totally emptied the > hints file for shared libs. I thought it was supposed to default to -R, > which supposedly rescans the configured directories. I had to reboot and am > still not sure it's back to the way it was, but things seem to be working. > > Couple of questions: > > 1) How do I tell the system I have libintl.so.2 installed and not > libintl.so.1? Rebuild all the ports that depend on libintl.so.1. > > 2) Who is deleting my symlink and why? Not sure. portupgrade can delete old libs when upgrading if you specify the -u option. However, by default, it preserves old libraries in a separate directory. > > 3) Why does ldconfig screw up your configuration when you run it w/o > parameters, and how should I have run it instead? When you run ldconfig without parameters, I think it only catalogs /usr/lib. You probably want to run it with the -m flag to rescan and merge changes from a different directory: ldconfig -m /usr/X11R6/lib ldconfig -m /usr/local/lib ... Joe > > Thanks. > Tom Hines > > > > _________________________________________________________________ > Chat with friends online, try MSN Messenger: http://messenger.msn.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:13:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 48C4937B404 for ; Sun, 28 Apr 2002 13:13:51 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id NAA02824; Sun, 28 Apr 2002 13:13:46 -0700 Message-ID: <3CCC57F9.2050302@owt.com> Date: Sun, 28 Apr 2002 13:13:45 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Tom Hines Cc: questions@FreeBSD.ORG Subject: Re: libintl.so.1 not found References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tom Hines wrote: > Hi. I've been getting this error a lot when trying to build ports and > also when I reboot my computer and startx. I know the file is provided > by gettext, but I have the latest installed, gettext-0.11.1_1, which > installs libintl.so.2. I tried symlinking libintl.so.1 -> libintl.so.2, > which works temporarily, but the symlink gets deleted after rebooting > and after building a port. I tried ldconfig with no parameters, which > totally emptied the hints file for shared libs. I thought it was > supposed to default to -R, which supposedly rescans the configured > directories. I had to reboot and am still not sure it's back to the way > it was, but things seem to be working. > > Couple of questions: > > 1) How do I tell the system I have libintl.so.2 installed and not > libintl.so.1? > > 2) Who is deleting my symlink and why? > > 3) Why does ldconfig screw up your configuration when you run it w/o > parameters, and how should I have run it instead? I think you have missed a point somehwere and need to install the older version. You will have the new version and an old version. You can cd /usr/ports/devel/gettext-old and make and install the port. You problem will probably disappear. If they do not, you have ports that need to be updated. A cvsup of ports-all and then recreating the INDEX files will get you to where you need to be to start updating. Any of the ports that still need the ...10.x version will use the gettext-old version once you update them. Kent > > Thanks. > Tom Hines > > > > _________________________________________________________________ > Chat with friends online, try MSN Messenger: http://messenger.msn.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:15:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mallard.duc.auburn.edu (mallard2.duc.auburn.edu [131.204.2.23]) by hub.freebsd.org (Postfix) with ESMTP id E359A37B419 for ; Sun, 28 Apr 2002 13:15:31 -0700 (PDT) Received: from localhost (kokostm@localhost) by mallard.duc.auburn.edu (8.9.3/8.9.3) with SMTP id PAA13006 for ; Sun, 28 Apr 2002 15:15:31 -0500 (CDT) X-Authentication-Warning: mallard.duc.auburn.edu: kokostm owned process doing -bs Date: Sun, 28 Apr 2002 15:15:31 -0500 (CDT) From: Todd M Kokoszka X-Sender: kokostm@mallard To: freebsd-questions@freebsd.org Subject: locked out of machine Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, In a previous post I menteiond that the pkg tools deleted my bash shell. I don't have a boot disk and can't log onto my machine because my accounts are configured to use bash as their shell and the system can't find it. Is there any way I can get a boot disk remotely or get into my machine? Thanks, Todd To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:20: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.nc.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id 0A66837B41B for ; Sun, 28 Apr 2002 13:20:01 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail6.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Sun, 28 Apr 2002 16:19:42 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id 908F6BA05; Sun, 28 Apr 2002 16:19:40 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: Todd M Kokoszka , freebsd-questions@FreeBSD.ORG Subject: Re: locked out of machine Date: Sun, 28 Apr 2002 16:19:40 -0400 X-Mailer: KMail [version 1.3] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020428201940.908F6BA05@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG boot -s . Then once you are in, mount -u ; mount -a. Then fix things up. On Sunday 28 April 2002 04:15 pm, Todd M Kokoszka wrote: | Hello, | | In a previous post I menteiond that the pkg tools deleted my bash shell. I | don't have a boot disk and can't log onto my machine because my accounts | are configured to use bash as their shell and the system can't find it. Is | there any way I can get a boot disk remotely or get into my machine? | | Thanks, | Todd | | | To Unsubscribe: send mail to majordomo@FreeBSD.org | with "unsubscribe freebsd-questions" in the body of the message -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:25:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 5A8C237B400 for ; Sun, 28 Apr 2002 13:25:16 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id NAA03202; Sun, 28 Apr 2002 13:25:13 -0700 Message-ID: <3CCC5AA8.4040907@owt.com> Date: Sun, 28 Apr 2002 13:25:12 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Todd M Kokoszka Cc: freebsd-questions@FreeBSD.ORG Subject: Re: locked out of machine References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Todd M Kokoszka wrote: > Hello, > > In a previous post I menteiond that the pkg tools deleted my bash shell. I > don't have a boot disk and can't log onto my machine because my accounts > are configured to use bash as their shell and the system can't find it. Is > there any way I can get a boot disk remotely or get into my machine? Well, you should be able to log into root and change them to a valid shell. You may only have to edit /etc/shells. If you have changed root to bash, you have reached a point of understanding why you don't fiddle with roots shell. In that case, you will probably have to boot to single user mode and make the changes there. The boot process asks what shell to use and sh should still be a valid shell. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:35:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mallard.duc.auburn.edu (mallard2.duc.auburn.edu [131.204.2.23]) by hub.freebsd.org (Postfix) with ESMTP id 398AD37B41A for ; Sun, 28 Apr 2002 13:35:12 -0700 (PDT) Received: from localhost (kokostm@localhost) by mallard.duc.auburn.edu (8.9.3/8.9.3) with SMTP id PAA19957; Sun, 28 Apr 2002 15:35:05 -0500 (CDT) X-Authentication-Warning: mallard.duc.auburn.edu: kokostm owned process doing -bs Date: Sun, 28 Apr 2002 15:35:05 -0500 (CDT) From: Todd M Kokoszka X-Sender: kokostm@mallard To: "Brian T.Schellenberger" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: locked out of machine In-Reply-To: <20020428201940.908F6BA05@i8k.babbleon.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks for the help. It worked fine. Todd On Sun, 28 Apr 2002, Brian T.Schellenberger wrote: > > boot -s . > > Then once you are in, mount -u ; mount -a. > > Then fix things up. > > > On Sunday 28 April 2002 04:15 pm, Todd M Kokoszka wrote: > | Hello, > | > | In a previous post I menteiond that the pkg tools deleted my bash shell. I > | don't have a boot disk and can't log onto my machine because my accounts > | are configured to use bash as their shell and the system can't find it. Is > | there any way I can get a boot disk remotely or get into my machine? > | > | Thanks, > | Todd > | > | > | To Unsubscribe: send mail to majordomo@FreeBSD.org > | with "unsubscribe freebsd-questions" in the body of the message > > -- > Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) > Brian, the man from Babble-On . . . . bts@babbleon.org (personal) > http://www.babbleon.org > > http://www.eff.org http://www.programming-freedom.org > > If you smell the smoke you don't need to be told what you've got to do; > Yet there's a certain breed, so very in-between, they'd rather take a > vote. -- DEVO -- Here To Go > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:40:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts12-srv.bellnexxia.net (tomts12.bellnexxia.net [209.226.175.56]) by hub.freebsd.org (Postfix) with ESMTP id F356237B417 for ; Sun, 28 Apr 2002 13:40:38 -0700 (PDT) Received: from scaryg.shacknet.nu ([64.231.138.102]) by tomts12-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020428204038.EEMG20541.tomts12-srv.bellnexxia.net@scaryg.shacknet.nu>; Sun, 28 Apr 2002 16:40:38 -0400 Received: from localhost ([::1] helo=scaryg.shacknet.nu) by scaryg.shacknet.nu with smtp (Exim 3.35 #1) id 171vUS-0000Bl-00; Sun, 28 Apr 2002 16:41:48 -0400 Date: Sun, 28 Apr 2002 16:41:47 -0400 From: ScaryG To: "Joe & Fhe Barbish" Cc: questions@FreeBSD.ORG Subject: Re: Adding a Maxtor Ultra ATA/100 PCI Adapter - what goes in the KERNEL? Message-Id: <20020428164147.3a28e971.freymann@scaryg.shacknet.nu> In-Reply-To: References: <20020427125135.1b45e41c.freymann@scaryg.shacknet.nu> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-MailScanner: Found to be clean Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 27 Apr 2002 14:58:55 -0400 "Joe & Fhe Barbish" wrote: > Disable the motherboards ata33 ide controllers in the PC's bios. > Reboot and pause when the post bios summery report is displayed. > See if the PC's bios found your new ata66 controller expansion board. Yes, you would think this would work wouldn't ya. I disabled both IDE Channels but FreeBSD still detects it on bootup. No matter what I do I can't get the Maxtor PCI card to boot up a drive so I give up. I put it back on the normal ide channel and it does work. I was unable to to write anything to my CD-Burner since removing the SCSI drives and going with one big IDE so I moved the burner to my windoze box and that's the end of that. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Scary Gerry -- Senior Systems Manager freymann@scaryg.shacknet.nu -For web-hosting, DNS Services or PHP & MySql programming see www.interpool.ca -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:42:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts11-srv.bellnexxia.net (tomts11.bellnexxia.net [209.226.175.55]) by hub.freebsd.org (Postfix) with ESMTP id C23E437B404 for ; Sun, 28 Apr 2002 13:42:13 -0700 (PDT) Received: from scaryg.shacknet.nu ([64.231.138.102]) by tomts11-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020428204213.DZAM23963.tomts11-srv.bellnexxia.net@scaryg.shacknet.nu>; Sun, 28 Apr 2002 16:42:13 -0400 Received: from localhost ([::1] helo=scaryg.shacknet.nu) by scaryg.shacknet.nu with smtp (Exim 3.35 #1) id 171vVy-0000C1-00; Sun, 28 Apr 2002 16:43:22 -0400 Date: Sun, 28 Apr 2002 16:43:22 -0400 From: ScaryG To: "David S. Jackson" Cc: freebsd-questions@freebsd.org Subject: Re: Cheatsheets no longer available? Message-Id: <20020428164322.2ff1746c.freymann@scaryg.shacknet.nu> In-Reply-To: <20020428042704.GA26767@scee.dsj.net> References: <20020428042704.GA26767@scee.dsj.net> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-MailScanner: Found to be clean Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002 00:27:04 -0400 "David S. Jackson" wrote: > I just hit www.mostgraveconcern.com/freebsd/ and read that the > cheatsheets are no longer available. Anyone know what's going on there? Yes, when I visited there Saturday he had put up a note that it's no longer available :-( Good thing I got into the habit of printing out the articles I like to refer to! I may have to start adding some pages like that to my site. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Scary Gerry -- Senior Systems Manager freymann@scaryg.shacknet.nu -For web-hosting, DNS Services or PHP & MySql programming see www.interpool.ca -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:46:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f141.law9.hotmail.com [64.4.9.141]) by hub.freebsd.org (Postfix) with ESMTP id 6601B37B405 for ; Sun, 28 Apr 2002 13:46:35 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 13:46:35 -0700 Received: from 68.50.137.180 by lw9fd.law9.hotmail.msn.com with HTTP; Sun, 28 Apr 2002 20:46:35 GMT X-Originating-IP: [68.50.137.180] From: "Tom Hines" To: marcus@marcuscom.com Cc: questions@FreeBSD.ORG Subject: Re: libintl.so.1 not found Date: Sun, 28 Apr 2002 16:46:35 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 28 Apr 2002 20:46:35.0317 (UTC) FILETIME=[C934E650:01C1EEF5] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > 1) How do I tell the system I have libintl.so.2 installed and not > > libintl.so.1? > >Rebuild all the ports that depend on libintl.so.1. Ah, yes. I guess the reason startx failed was because I hadn't recompiled X. I have portupgrade set to never upgrade X. > > 2) Who is deleting my symlink and why? > >Not sure. portupgrade can delete old libs when upgrading if you specify >the -u option. However, by default, it preserves old libraries in a >separate directory. Hmmm, portupgrade is the culprit. I build things with "portupgrade -R" and when it's done my symlink is gone. I wonder how I can prevent that because otherwise portupgrade is useless now. I guess I'll have to go back to the old "make install" technique. Reinstalling gettext-old didn't work. It didn't install a libintl.so.1, so I removed it again and am going with the symlink for now. Thanks. _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:56: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fed1mtao03.cox.net (fed1mtao03.cox.net [68.6.19.242]) by hub.freebsd.org (Postfix) with ESMTP id 557A337B41D for ; Sun, 28 Apr 2002 13:56:04 -0700 (PDT) Received: from sean ([68.8.169.88]) by fed1mtao03.cox.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020428205602.HVBU1378.fed1mtao03.cox.net@sean>; Sun, 28 Apr 2002 16:56:02 -0400 From: "Sean Noonan" To: Cc: "'ScaryG'" , "'David S. Jackson'" Subject: RE: Cheatsheets no longer available? Date: Sun, 28 Apr 2002 13:56:02 -0700 Message-ID: <007801c1eef7$1c0d6fe0$58a90844@sean> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: <20020428164322.2ff1746c.freymann@scaryg.shacknet.nu> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG He's apparently put them back up, along with a note on why he had taken them down in the first place. -Sean. > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of ScaryG > Sent: Sunday, April 28, 2002 1:43 PM > To: David S. Jackson > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: Cheatsheets no longer available? > > > On Sun, 28 Apr 2002 00:27:04 -0400 > "David S. Jackson" wrote: > > > I just hit www.mostgraveconcern.com/freebsd/ and read that the > > cheatsheets are no longer available. Anyone know what's > going on there? > > Yes, when I visited there Saturday he had put up a note that it's no > longer available :-( > > Good thing I got into the habit of printing out the articles > I like to > refer to! > > I may have to start adding some pages like that to my site. > > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > Scary Gerry -- Senior Systems Manager > freymann@scaryg.shacknet.nu > -For web-hosting, DNS Services or PHP & > MySql programming see www.interpool.ca > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 13:58: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f75.law11.hotmail.com [64.4.17.75]) by hub.freebsd.org (Postfix) with ESMTP id 2717037B417 for ; Sun, 28 Apr 2002 13:57:56 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 13:57:56 -0700 Received: from 68.6.87.128 by lw11fd.law11.hotmail.msn.com with HTTP; Sun, 28 Apr 2002 20:57:55 GMT X-Originating-IP: [68.6.87.128] From: "Charles Burns" To: questions@freebsd.org Subject: This definitely qualifies as weird... Date: Sun, 28 Apr 2002 13:57:55 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 28 Apr 2002 20:57:56.0022 (UTC) FILETIME=[5EF03D60:01C1EEF7] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I said to the shell, "make buildworld" It said to me, among other things: ### /usr/src/gnu/usr.bin/groff/src/libs/libgroff/../../../../../../contrib/groff/src/libs/libgroff/tmpfile.cc:31: nonposix.h: No such file or directory /usr/src/gnu/usr.bin/groff/src/libs/libgroff/../../../../../../contrib/groff/src/libs/libgroff/illegal.cc:22: lib.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/gnu/usr.bin/groff/src/libs/libgroff. *** Error code 1 ### (there were a ton of "No such file or directory" messages) So, I changed my compile flags to "-O -pipe" And the shell guiltlessly told me the same thing. Then I commented out the CFLAGS and CXXFLAGS lines out of make.conf entirely, so that the buildworld would use the default flags. Then, the buildworld worked fine. And the default flags that did work when mine did not were... "-O -pipe" I am now officially confused. Why did the default flags work when mine did not, when they are he same flags!? WTF? This is indeed strange. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:10:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from zipcon.net (zipcon.net [209.221.136.5]) by hub.freebsd.org (Postfix) with SMTP id 2F14237B41D for ; Sun, 28 Apr 2002 14:10:51 -0700 (PDT) Received: (qmail 16581 invoked from network); 28 Apr 2002 21:11:35 -0000 Received: from chillin.zipcon.net (HELO there) (209.221.137.18) by zipcon.net with SMTP; 28 Apr 2002 21:11:35 -0000 Content-Type: text/plain; charset="iso-8859-1" From: David Herman To: questions@freebsd.org Subject: Re: Cheatsheets no longer available? Date: Sun, 28 Apr 2002 14:09:42 -0700 X-Mailer: KMail [version 1.3.2] References: <20020428042704.GA26767@scee.dsj.net> <20020428164322.2ff1746c.freymann@scaryg.shacknet.nu> In-Reply-To: <20020428164322.2ff1746c.freymann@scaryg.shacknet.nu> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020428211051.2F14237B41D@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 28 April 2002 01:43 pm, ScaryG wrote: > On Sun, 28 Apr 2002 00:27:04 -0400 > > "David S. Jackson" wrote: > > I just hit www.mostgraveconcern.com/freebsd/ and read that the > > cheatsheets are no longer available. Anyone know what's going on > > there? > > Yes, when I visited there Saturday he had put up a note that it's no > longer available :-( google has theme cached, I don't know for how long things are kept. -- dh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:19:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 5DD9537B41B for ; Sun, 28 Apr 2002 14:19:18 -0700 (PDT) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id 02AA22B6CB; Sun, 28 Apr 2002 23:19:15 +0200 (CEST) Received: by k7.mavetju.org (Postfix, from userid 1001) id 6E3DB33B; Mon, 29 Apr 2002 07:19:11 +1000 (EST) Date: Mon, 29 Apr 2002 07:19:11 +1000 From: Edwin Groothuis To: stan Cc: freebsd-questions@freebsd.org Subject: Re: portupgrade failures this weekend Message-ID: <20020429071911.F77837@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , stan , freebsd-questions@freebsd.org References: <20020428115146.GA5319@teddy.fas.com> <20020428220114.B56548@k7.mavetju.org> <20020428133044.GA7582@teddy.fas.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020428133044.GA7582@teddy.fas.com>; from stanb@awod.com on Sun, Apr 28, 2002 at 09:30:44AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 09:30:44AM -0400, stan wrote: > On Sun, Apr 28, 2002 at 10:01:14PM +1000, Edwin Groothuis wrote: > > On Sun, Apr 28, 2002 at 07:51:46AM -0400, stan wrote: > > > I routinely csvup, makeworld, and portupgrade my laptop each weekend. > > > > > > This weekend several of the ports failed to build. Here is a list: > > > > > > ! devel/autoconf (autoconf-2.52_2) (unknown build error) > > > ! www/p5-libwww (p5-libwww-5.53) (unknown build error) > > > ! devel/bison (bison-1.29) (unknown build error) > > > ! converters/kdesupport11 (kdesupport-1.94) (Makefile broken) > > > ! graphics/ImageMagick (ImageMagick-5.4.3.11_2) (install error) > > > ! devel/sdl10 (sdl-1.0.8_1) (port directory error) > > > ! astro/xglobe (xglobe-0.5) (Makefile broken) > > > ! games/blackjack (blackjack-1.2) (Makefile broken) > > > ! x11-toolkits/gtk-engines (gtk-engines-0.12_1) (configure error) > > > ! x11/gnomelibs (gnomelibs-1.4.1.4_1) (install error) > > > ! irc/xchat (xchat-1.8.4) (unknown build error) > > > > > > The machine s runing STABLE. > > > > > > Does anyone see a patern here? > > > > Well, portupgrade is just a tool to automate it, but if it fails > > means you have to check it manually. For example: > > > > astro/xglobe doesn't exist anymore > > devel/sdl10 doesn't exist anymore > > games/blackjack doesn't exist anymore > > converters/kdesupport11 doesn't exist anymore > > > > For the rest, I would say "run it manually" and see what goes wrong. > > > > Interesting, I was under the impression that cvsup would delete any old > ports directories. Might I be mising an option? It will delete the directories if the directory is empty. In your case, they probably do still exist with an .html file in it. > In any case, I suspect that autoconf is the cuplrit. I notice that there is > a directory for autoconf, and autoconf123, any idea what's going on there/ I have installed both (autoconf and autoconf213). It compiles fine here, nothing I can help you with further. > config.status: creating man/Makefile > ./config.status[585]: cd: bad substitution > ./config.status[587]: cd: .. ..: [No such file or directory] > config.status: creating lib/emacs/Makefile This is not good... Try removing all autoconf packages before you make this one (which could be a scary thing). Don't forget, you can always pkg_add the package from ftp.freebsd.org :-) Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:38:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.mail.pas.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 15EC437B41D for ; Sun, 28 Apr 2002 14:38:16 -0700 (PDT) Received: from user-119a2km.biz.mindspring.com ([66.149.10.150] helo=scee.dsj.net) by hawk.mail.pas.earthlink.net with esmtp (Exim 3.33 #2) id 171wN1-0000YJ-00; Sun, 28 Apr 2002 14:38:11 -0700 Received: from dsj by scee.dsj.net with local (Exim 3.35 #1 (Debian)) id 171wN7-0007nt-00; Sun, 28 Apr 2002 17:38:17 -0400 Date: Sun, 28 Apr 2002 17:38:17 -0400 From: "David S. Jackson" To: "David S. Jackson" Cc: freebsd-questions@freebsd.org Subject: Re: make installkernel KERNEL=MYKERNEL? Message-ID: <20020428213817.GC839@scee.dsj.net> Reply-To: "David S. Jackson" References: <20020428192455.GA24569@scee.dsj.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020428192455.GA24569@scee.dsj.net> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 03:24:55PM -0400 David S. Jackson wrote: > Hi, > > I'm a little confused by the instructions in chapter 9 of the handbook > on the "new" way to make/install a new kernel: > > Note: In FreeBSD 4.2 and older you must replace KERNCONF= with KERNEL=. > 4.2-STABLE that was fetched after > Feb 2nd, 2001 does recognize KERNCONF=. Turns out I misread the meaning of the above to "...Feb 2nd, 2001 does not recognize KERNCONF=." Oops. My bad. -- David S. Jackson dsj@dsj.net =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Showing up is 80% of life. -- Woody Allen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:40:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailrtr02.ntelos.net (mailrtr02.ntelos.net [216.12.0.102]) by hub.freebsd.org (Postfix) with ESMTP id 54EB137B400 for ; Sun, 28 Apr 2002 14:40:50 -0700 (PDT) Received: from eric-r69f52ms45.intelos.com (c3s6m23.access.ntelos.net [216.12.54.224]) by mailrtr02.ntelos.net (8.11.4/8.11.4) with ESMTP id g3SLems04161 for ; Sun, 28 Apr 2002 17:40:49 -0400 Message-Id: <5.1.0.14.2.20020428173828.00b12f58@mail.intelos.com> X-Sender: eburke@mail.intelos.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 28 Apr 2002 17:40:38 -0400 To: freebsd-questions@FreeBSD.ORG From: "Eric B." Subject: WindowsXP Pro and FreeBSD Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I am running WindowsXP Pro(NT.5.1). And I would also like to have FreeBSD on the same computer. Is this possible With NT.5.1? Or Will I run into problems? Thank you for your time Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:41:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 9A89C37B417 for ; Sun, 28 Apr 2002 14:41:49 -0700 (PDT) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id 8C4CA2B84A; Sun, 28 Apr 2002 23:41:46 +0200 (CEST) Received: by k7.mavetju.org (Postfix, from userid 1001) id 314E333B; Mon, 29 Apr 2002 07:41:43 +1000 (EST) Date: Mon, 29 Apr 2002 07:41:43 +1000 From: Edwin Groothuis To: stan Cc: freebsd-questions@freebsd.org Subject: Re: portupgrade failures this weekend Message-ID: <20020429074143.G77837@k7.mavetju.org> Reply-To: freebsd-questions@freebsd.org Mail-Followup-To: Edwin Groothuis , stan , freebsd-questions@freebsd.org References: <20020428115146.GA5319@teddy.fas.com> <20020428220114.B56548@k7.mavetju.org> <20020428133044.GA7582@teddy.fas.com> <20020429071911.F77837@k7.mavetju.org> <20020428213955.GA1729@teddy.fas.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020428213955.GA1729@teddy.fas.com>; from stanb@awod.com on Sun, Apr 28, 2002 at 05:39:55PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 05:39:55PM -0400, stan wrote: > On Mon, Apr 29, 2002 at 07:19:11AM +1000, Edwin Groothuis wrote: > > On Sun, Apr 28, 2002 at 09:30:44AM -0400, stan wrote: > > > On Sun, Apr 28, 2002 at 10:01:14PM +1000, Edwin Groothuis wrote: > > > > On Sun, Apr 28, 2002 at 07:51:46AM -0400, stan wrote: > > > > > I routinely csvup, makeworld, and portupgrade my laptop each weekend. > > > > > > > > > > This weekend several of the ports failed to build. Here is a list: > > > > > > > > > > ! devel/autoconf (autoconf-2.52_2) (unknown build error) > > > > > ! www/p5-libwww (p5-libwww-5.53) (unknown build error) > > > > > ! devel/bison (bison-1.29) (unknown build error) > > > > > ! converters/kdesupport11 (kdesupport-1.94) (Makefile broken) > > > > > ! graphics/ImageMagick (ImageMagick-5.4.3.11_2) (install error) > > > > > ! devel/sdl10 (sdl-1.0.8_1) (port directory error) > > > > > ! astro/xglobe (xglobe-0.5) (Makefile broken) > > > > > ! games/blackjack (blackjack-1.2) (Makefile broken) > > > > > ! x11-toolkits/gtk-engines (gtk-engines-0.12_1) (configure error) > > > > > ! x11/gnomelibs (gnomelibs-1.4.1.4_1) (install error) > > > > > ! irc/xchat (xchat-1.8.4) (unknown build error) > > > > > > > > > > The machine s runing STABLE. > > > > > > > > > > Does anyone see a patern here? > > > > > > > > Well, portupgrade is just a tool to automate it, but if it fails > > > > means you have to check it manually. For example: > > > > > > > > astro/xglobe doesn't exist anymore > > > > devel/sdl10 doesn't exist anymore > > > > games/blackjack doesn't exist anymore > > > > converters/kdesupport11 doesn't exist anymore > > > > > > > > For the rest, I would say "run it manually" and see what goes wrong. > > > > I have installed both (autoconf and autoconf213). It compiles fine > > here, nothing I can help you with further. > > Any idea why there are 2? Different features, different output, different versions. But then, no, I don't know :-) Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:47: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from muay.amphex.com (ninja.amphex.com [217.13.29.51]) by hub.freebsd.org (Postfix) with ESMTP id 90A9F37B41E for ; Sun, 28 Apr 2002 14:46:57 -0700 (PDT) Received: by muay.amphex.com (Postfix, from userid 1000) id E54747AE; Sun, 28 Apr 2002 23:46:22 +0200 (CEST) Date: Sun, 28 Apr 2002 23:46:18 +0200 From: Johann Sharizan To: questions@freebsd.org Subject: rpc.statd: Message-ID: <20020428234617.A52303@muay.amphex.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My greetings to the scene, What can I do to improve the situation? muay.amphex.com kernel log messages: > Apr 27 09:34:33 muay rpc.statd: invalid hostname to sm_stat: ^X\M-w\M^?\M= -?^X\M-w\M^?\M-?^Y\M-w\M^?\M-?^Y\M-w\M^?\M-?^Z\M-w\M^?\M-?^Z\M-w\M^?\M-?^[\= M-w\M^?\M-?^[\M-w\M^?\M-?%8x%8x%8x%8x%8x%8x%8x%8x%8x%236x%n%137x%n%10x%n%19= 2x%nM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^= PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-= ^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM= -^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^P= M-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^= PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-= ^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM= -^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^P= M-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^= PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-= ^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM= -^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^PM-^P Regards, -- Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 14:56:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.114.66.201]) by hub.freebsd.org (Postfix) with ESMTP id 6806D37B41B; Sun, 28 Apr 2002 14:56:43 -0700 (PDT) Received: from tomsk (tomsk [66.114.66.202]) by omsk.mushinsky.net (8.11.6/8.11.6) with ESMTP id g3SLuQE12168; Sun, 28 Apr 2002 17:56:27 -0400 (EDT) (envelope-from imush@math.berkeley.edu) From: "Isaac Mushinsky" To: "'j Gatsby'" Cc: , Subject: RE: help! can't build kde3 Date: Sun, 28 Apr 2002 17:56:33 -0400 Message-ID: <000901c1eeff$8fd95260$ca427242@mushinsky.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <3CCC2722.8010205@charter.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I did that, of course :-( and who knows what are these sed files? -----Original Message----- From: j Gatsby [mailto:jgatsby@charter.net] Sent: Sunday, April 28, 2002 12:45 PM To: Isaac Mushinsky Cc: freebsd-ports@freebsd.org; freebsd-questions@freebsd.org Subject: Re: help! can't build kde3 Uninstall all previous versions of kde and qt before building. That's what I did and it worked just fine. check out http://freebsd.kde.org Isaac Mushinsky wrote: >While building kdenetwork3 during configure I get prompts as below, and then >a make error. It does not seem to matter whether I answer yes or no to these >questions. >The prompts also came up during the build of kdelibs/kdebase, but then they >built successfully. Please help! > > > >>checking target system type... i386-portbld-freebsd4.5 >>remove conftest.sed? y >>checking for a BSD-compatible install... /usr/bin/install -c >> >> >............ >and then many times > > > >>checking for BSD-compatible nm... /usr/bin/nm -B >>checking for a sed that does not truncate output... overwrite >> >> >/tmp/sedutrG9q/sed.in? (y/n [n]) y > > >>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >> >> >... > > >>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >> >> > >, and finally a make error: > >checking whether ln -s works... yes >autoheader: `config.h.in' is updated >cd . \ >&& CONFIG_FILES= CONFIG_HEADERS=config.h \ >/usr/local/bin/bash ./config.status >config.status: creating config.h >config.status: executing default-1 commands >gmake all-recursive >gmake[1]: Entering directory >`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' >Making all in mimelib >gmake[2]: Entering directory >`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >cd .. && \ >CONFIG_HEADERS= CONFIG_LINKS= \ >CONFIG_FILES=mimelib/Makefile /bin/sh ./config.status >config.status: creating mimelib/Makefile >config.status: executing default-1 commands >gmake[2]: Leaving directory >`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >gmake[2]: Entering directory >`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >Makefile:422: *** missing separator. Stop. >gmake[2]: Leaving directory >`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >gmake[1]: *** [all-recursive] Error 1 >gmake[1]: Leaving directory `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' >gmake: *** [all-recursive-am] Error 2 >*** Error code 2 > >Stop in /usr/ports/net/kdenetwork3. >kdenetwork3> > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15: 4:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail5.wi.rr.com (fe5.rdc-kc.rr.com [24.94.163.52]) by hub.freebsd.org (Postfix) with ESMTP id D564C37B420 for ; Sun, 28 Apr 2002 15:04:53 -0700 (PDT) Received: from bogart ([65.31.92.20]) by mail5.wi.rr.com with Microsoft SMTPSVC(5.5.1877.537.53); Sun, 28 Apr 2002 17:02:00 -0500 Message-ID: <001101c0d0f8$4f0e7bf0$145c1f41@bogart> From: "Nick Lozinsky" To: , "Eric B." References: <5.1.0.14.2.20020428173828.00b12f58@mail.intelos.com> Subject: Re: WindowsXP Pro and FreeBSD Date: Sun, 29 Apr 2001 17:04:05 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Eric B." To: Sent: Sunday, April 28, 2002 4:40 PM Subject: WindowsXP Pro and FreeBSD > Hi, I am running WindowsXP Pro(NT.5.1). And I would also like to have > FreeBSD on the same computer. Is this possible With NT.5.1? Or Will I run > into problems? > > Thank you for your time > > Eric > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Eric, Multibooting WinNT 5 or 2000 and FreeBSD will work. To my knowledge, FreeBSD can be booted with almost any other OS. Although I and many other people have problems with the FreeBSD booteasy bootloader, after installing FreeBSD onto a disk with win2000, the menu to boot loader will look sonething similar to this: F1: ??? F2: FreeBSD I do not know how to get rid of the ???, and have not been provided with an answer. You can use the win2000 boot loader to boot FreeBSD too. Overall, FreeBSD will work together with Win2000. Nick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15: 5:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp1out.rdc-nyc.rr.com (nycsmtp1out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id 84F3237B400 for ; Sun, 28 Apr 2002 15:05:20 -0700 (PDT) Received: from scott1.nyc.rr.com (24-168-24-239.nyc.rr.com [24.168.24.239]) by nycsmtp1out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id g3SM3Ygj016827; Sun, 28 Apr 2002 18:03:35 -0400 (EDT) Message-Id: <5.1.0.14.0.20020428180427.00c2bb68@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 28 Apr 2002 18:05:16 -0400 To: "Eric B." , freebsd-questions@FreeBSD.ORG From: Scott Subject: Re: WindowsXP Pro and FreeBSD In-Reply-To: <5.1.0.14.2.20020428173828.00b12f58@mail.intelos.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 17:40 2002/04/28 -0400, Eric B. wrote: >Hi, I am running WindowsXP Pro(NT.5.1). And I would also like to have >FreeBSD on the same computer. Is this possible With NT.5.1? Or Will I run >into problems? > >Thank you for your time It shouldn't cause problems. Just remember (If you haven't installed FreeBSD before) that FreeBSD unlike Linux, will need a primary partition, rather than a logical drive. HTH Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15: 6:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts7-srv.bellnexxia.net (tomts7.bellnexxia.net [209.226.175.40]) by hub.freebsd.org (Postfix) with ESMTP id 87DE137B421 for ; Sun, 28 Apr 2002 15:05:52 -0700 (PDT) Received: from scaryg.shacknet.nu ([64.231.138.102]) by tomts7-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020428220551.FPET4008.tomts7-srv.bellnexxia.net@scaryg.shacknet.nu> for ; Sun, 28 Apr 2002 18:05:51 -0400 Received: from localhost ([::1] helo=scaryg.shacknet.nu) by scaryg.shacknet.nu with smtp (Exim 3.35 #1) id 171wox-0000IJ-00 for freebsd-questions@freebsd.org; Sun, 28 Apr 2002 18:07:03 -0400 Date: Sun, 28 Apr 2002 18:07:03 -0400 From: ScaryG To: FreeBSD Questions Subject: rysnc remote backups Message-Id: <20020428180703.6e3b5bb5.freymann@scaryg.shacknet.nu> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-MailScanner: Found to be clean Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm trying to figure out how I can rsync to backup some remote files.. On the "server" I have created a /usr/local/etc/rsync.conf file with motd file = /usr/local/etc/rsyncd.motd log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock [web] path = /files/web comment = web backups uid = gerald gid = operator read only = no list = yes max connections = 2 auth users = gerald,freymann secrets file = /usr/local/etc/rsyncd.secrets hosts allow = 10.0.0.1 (the 10.0.0.1 is for example purposes only, but is the remote IP) In the /usr/local/etc/rsyncd.secrets files is: gerald:passwd and I'm running Rsync in --daemon mode. Now, on the remote system, when I execute: cd /web /usr/local/bin/rsync -avz --rsh=/usr/bin/ssh *.php gerald@myhost.com:web /usr/local/bin/rsync -avz --rsh=/usr/bin/ssh *.pl gerald@myhost.com:web it copies the files but into a web directory in the home directory of user gerald. It's not using the "web" nickname in the rsync.conf file and putting the files into /files/web where I want them ('cause that's a larger partition). Any ideas? =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Scary Gerry -- Senior Systems Manager freymann@scaryg.shacknet.nu -For web-hosting, DNS Services or PHP & MySql programming see www.interpool.ca -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15: 6:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id 3646337B404 for ; Sun, 28 Apr 2002 15:06:51 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g3SM6ouF056789; Sun, 28 Apr 2002 16:06:50 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g3SM6obV056786; Sun, 28 Apr 2002 16:06:50 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Sun, 28 Apr 2002 16:06:50 -0600 (MDT) From: Warren Block To: David Powers Cc: "Blane R. Boynton" , freebsd-questions@FreeBSD.ORG Subject: RE: Cannot configure Netgear FA410TX in Compaq Prosignia 150 Laptop In-Reply-To: <000e01c1eef0$5fef6210$0401a8c0@daveabit> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002, David Powers wrote: > It is possible that you may find the answer to your problem in the > FreeBSDDiary article. [David, you're posting in either HTML or Word format or both. Please turn that off in your mailer. Thanks.] > http://www.freebsddiary.org/last-netgear.php"http://www.freebsddiary.org/last-netgear.php That article is from August 2000, and things have very likely changed. The FA410TX is certainly in /etc/defaults/pcccard.conf. Mine works, although it does not start up as quickly as other cards. Blane, on my Toshiba I had to set /etc/pccard.conf as irq 10 only. I also rebuilt the kernel to use ed0 on irq 10. Along with a few other things I posted about a couple of weeks ago, this got the FA410 going. -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15:27:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 9B16437B416; Sun, 28 Apr 2002 15:27:39 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id PAA08343; Sun, 28 Apr 2002 15:27:35 -0700 Message-ID: <3CCC7755.6040505@owt.com> Date: Sun, 28 Apr 2002 15:27:33 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Isaac Mushinsky Cc: "'j Gatsby'" , freebsd-ports@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: help! can't build kde3 References: <000901c1eeff$8fd95260$ca427242@mushinsky.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Isaac Mushinsky wrote: > I did that, of course :-( > and who knows what are these sed files? I used the port and never saw them. How are you installing it. There are also some recent commits to fix build problems. Kent > > -----Original Message----- > From: j Gatsby [mailto:jgatsby@charter.net] > Sent: Sunday, April 28, 2002 12:45 PM > To: Isaac Mushinsky > Cc: freebsd-ports@freebsd.org; freebsd-questions@freebsd.org > Subject: Re: help! can't build kde3 > > > Uninstall all previous versions of kde and qt before building. That's > what I did and it worked > just fine. check out http://freebsd.kde.org > > > > > Isaac Mushinsky wrote: > > >>While building kdenetwork3 during configure I get prompts as below, and >> > then > >>a make error. It does not seem to matter whether I answer yes or no to >> > these > >>questions. >>The prompts also came up during the build of kdelibs/kdebase, but then they >>built successfully. Please help! >> >> >> >> >>>checking target system type... i386-portbld-freebsd4.5 >>>remove conftest.sed? y >>>checking for a BSD-compatible install... /usr/bin/install -c >>> >>> >>> >>............ >>and then many times >> >> >> >> >>>checking for BSD-compatible nm... /usr/bin/nm -B >>>checking for a sed that does not truncate output... overwrite >>> >>> >>> >>/tmp/sedutrG9q/sed.in? (y/n [n]) y >> >> >> >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>> >>> >>> >>... >> >> >> >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>> >>> >>> >>, and finally a make error: >> >>checking whether ln -s works... yes >>autoheader: `config.h.in' is updated >>cd . \ >>&& CONFIG_FILES= CONFIG_HEADERS=config.h \ >>/usr/local/bin/bash ./config.status >>config.status: creating config.h >>config.status: executing default-1 commands >>gmake all-recursive >>gmake[1]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' >>Making all in mimelib >>gmake[2]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>cd .. && \ >>CONFIG_HEADERS= CONFIG_LINKS= \ >>CONFIG_FILES=mimelib/Makefile /bin/sh ./config.status >>config.status: creating mimelib/Makefile >>config.status: executing default-1 commands >>gmake[2]: Leaving directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>gmake[2]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>Makefile:422: *** missing separator. Stop. >>gmake[2]: Leaving directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>gmake[1]: *** [all-recursive] Error 1 >>gmake[1]: Leaving directory >> > `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' > >>gmake: *** [all-recursive-am] Error 2 >>*** Error code 2 >> >>Stop in /usr/ports/net/kdenetwork3. >>kdenetwork3> >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> >> >> >> > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15:46:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from omsk.mushinsky.net (omsk.mushinsky.net [66.114.66.201]) by hub.freebsd.org (Postfix) with ESMTP id D64D837B404; Sun, 28 Apr 2002 15:46:44 -0700 (PDT) Received: from tomsk (tomsk [66.114.66.202]) by omsk.mushinsky.net (8.11.6/8.11.6) with ESMTP id g3SMkNE12531; Sun, 28 Apr 2002 18:46:23 -0400 (EDT) (envelope-from imush@math.berkeley.edu) From: "Isaac Mushinsky" To: "'Kent Stewart'" Cc: "'j Gatsby'" , , Subject: RE: help! can't build kde3 Date: Sun, 28 Apr 2002 18:46:29 -0400 Message-ID: <000a01c1ef06$89dbf320$ca427242@mushinsky.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal In-Reply-To: <3CCC7755.6040505@owt.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I even recompiled X11 and everything dependent on it. -----Original Message----- From: Kent Stewart [mailto:kstewart@owt.com] Sent: Sunday, April 28, 2002 6:28 PM To: Isaac Mushinsky Cc: 'j Gatsby'; freebsd-ports@FreeBSD.ORG; freebsd-questions@FreeBSD.ORG Subject: Re: help! can't build kde3 Isaac Mushinsky wrote: > I did that, of course :-( > and who knows what are these sed files? I used the port and never saw them. How are you installing it. There are also some recent commits to fix build problems. Kent > > -----Original Message----- > From: j Gatsby [mailto:jgatsby@charter.net] > Sent: Sunday, April 28, 2002 12:45 PM > To: Isaac Mushinsky > Cc: freebsd-ports@freebsd.org; freebsd-questions@freebsd.org > Subject: Re: help! can't build kde3 > > > Uninstall all previous versions of kde and qt before building. That's > what I did and it worked > just fine. check out http://freebsd.kde.org > > > > > Isaac Mushinsky wrote: > > >>While building kdenetwork3 during configure I get prompts as below, and >> > then > >>a make error. It does not seem to matter whether I answer yes or no to >> > these > >>questions. >>The prompts also came up during the build of kdelibs/kdebase, but then they >>built successfully. Please help! >> >> >> >> >>>checking target system type... i386-portbld-freebsd4.5 >>>remove conftest.sed? y >>>checking for a BSD-compatible install... /usr/bin/install -c >>> >>> >>> >>............ >>and then many times >> >> >> >> >>>checking for BSD-compatible nm... /usr/bin/nm -B >>>checking for a sed that does not truncate output... overwrite >>> >>> >>> >>/tmp/sedutrG9q/sed.in? (y/n [n]) y >> >> >> >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.in? (y/n [n]) y >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>> >>> >>> >>... >> >> >> >>>overwrite /tmp/sedutrG9q/sed.nl? (y/n [n]) y >>> >>> >>> >>, and finally a make error: >> >>checking whether ln -s works... yes >>autoheader: `config.h.in' is updated >>cd . \ >>&& CONFIG_FILES= CONFIG_HEADERS=config.h \ >>/usr/local/bin/bash ./config.status >>config.status: creating config.h >>config.status: executing default-1 commands >>gmake all-recursive >>gmake[1]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' >>Making all in mimelib >>gmake[2]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>cd .. && \ >>CONFIG_HEADERS= CONFIG_LINKS= \ >>CONFIG_FILES=mimelib/Makefile /bin/sh ./config.status >>config.status: creating mimelib/Makefile >>config.status: executing default-1 commands >>gmake[2]: Leaving directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>gmake[2]: Entering directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>Makefile:422: *** missing separator. Stop. >>gmake[2]: Leaving directory >>`/usr/ports/net/kdenetwork3/work/kdenetwork-3.0/mimelib' >>gmake[1]: *** [all-recursive] Error 1 >>gmake[1]: Leaving directory >> > `/usr/ports/net/kdenetwork3/work/kdenetwork-3.0' > >>gmake: *** [all-recursive-am] Error 2 >>*** Error code 2 >> >>Stop in /usr/ports/net/kdenetwork3. >>kdenetwork3> >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> >> >> >> > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15:51:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from citadel.simphost.com (citadel.simphost.com [216.253.163.10]) by hub.freebsd.org (Postfix) with ESMTP id DE64937B41C for ; Sun, 28 Apr 2002 15:51:40 -0700 (PDT) Received: by citadel.simphost.com (Postfix, from userid 1000) id BB8EB24D48; Sun, 28 Apr 2002 18:50:48 -0400 (EDT) Received: from localhost (localhost [127.0.0.1]) by citadel.simphost.com (Postfix) with ESMTP id B008E20F09 for ; Sun, 28 Apr 2002 18:50:48 -0400 (EDT) Date: Sun, 28 Apr 2002 18:50:48 -0400 (EDT) From: "Jason L. Schwab" X-X-Sender: To: Subject: Logitech QuickCam Pro USB Message-ID: <20020428184756.P70879-100000@citadel.simphost.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Heya Folks; I have been running FreeBSD for many years, I have to say its the best server OS in my opinion without a doubt. I am wondering is there support to get pictures or do live video, still jpeg pictures from my Logitech USB QuickCam Pro My FreeBSD 4.5-STABLE Machine finds the USB device: ugen0: Logitech, Inc. Camera, rev 1.00/1.00, addr 2 So let me know... Thanks a million! - Jason L. Schwab http://www.jlschwab.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 15:59:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f243.law7.hotmail.com [216.33.237.243]) by hub.freebsd.org (Postfix) with ESMTP id A988037B404 for ; Sun, 28 Apr 2002 15:59:29 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 15:59:29 -0700 Received: from 206.96.185.126 by lw7fd.law7.hotmail.msn.com with HTTP; Sun, 28 Apr 2002 22:59:28 GMT X-Originating-IP: [206.96.185.126] From: "Corey Holcomb-Hockin" To: freebsd-questions@freebsd.org Subject: microuptime() went backwards (6508.426010 -> 6508.-694950282) Date: Sun, 28 Apr 2002 22:59:28 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 28 Apr 2002 22:59:29.0267 (UTC) FILETIME=[5A0D1C30:01C1EF08] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just build a new computer and have started getting this error message in my console about 5 times a day. I got many more when I was downloading the mozilla src though. I've looked up the problem in the mailing list and have tried a few things recommended to fix the problem. sysctl -w kern.timecounter.method=1 doesn't work. debug.acpi.disable="timer" in loader.conf doesn't work. removing the apm device from my kernal seems to works, but my time runs fast. this is my dmesg. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #3: Fri Apr 26 22:27:39 PDT 2002 corey@:/usr/src/sys/compile/PAVKERNAL Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP1900+ (1465.37-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff AMD Features=0xc0480000<,AMIE,DSP,3DNow!> real memory = 536788992 (524208K bytes) avail memory = 519426048 (507252K bytes) Preloaded elf kernel "kernel" at 0xc032c000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f1770 apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 ohci0: mem 0xec000000-0xec000fff irq 7 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered atapci0: port 0xd400-0xd40f at device 4.0 o n pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 isab0: at device 7.0 on pci0 isa0: on isab0 pcm0: port 0xb800-0xb83f irq 10 at device 11.0 on pci0 chip1: at device 17.0 on pci0 orm0:
hello,
I recently installed freebsd on my pc. = I installed=20 xfree86 4.0. the problem i have is that the only resolution i can get is = 320 x=20 200. I have an intel i810 graphics controller. using crtl - alt - + = doesn't=20 change the mode. i've tried to edit the configuration file but i still = can't get=20 it to work. any advice would be helpful.
 
thanks
jody
------=_NextPart_000_0005_01C1EF1E.9F8D9D00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23: 1:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id 4822C37B656 for ; Sun, 28 Apr 2002 23:01:14 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g3T61ha08467; Mon, 29 Apr 2002 09:01:43 +0300 Message-Id: <200204290601.g3T61ha08467@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 29 Apr 02 08:59:44 +0200 From: "Toomas Aas" Organization: Tartu City Government To: "Joe & Fhe Barbish" , freebsd-questions@freebsd.org Date: Mon, 29 Apr 2002 08:59:40 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: Hello In-reply-to: References: <002801c1ee00$fc2c0ac0$0100a8c0@station1> X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello! > The FBSD 4 CD set is available from many FBSD FTP sites. Many people think > they can just download the ISO image, burn it to CD and away they go. Well > here a news flash for you, it's not that easy. First of all the ISO image is > not supported in the MS/Windows world. Sure you can download it and burn it > to an CD using MS/Windows, but you end up with a data disk, not an bootable > CD, which it has to be to install from. What??? I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) using MS Windows and they have always turned out right (i.e. bootable). -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * How much net work could a network work, if a network could net work? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23: 1:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc24.worldnet.att.net (mtiwmhc24.worldnet.att.net [204.127.131.49]) by hub.freebsd.org (Postfix) with ESMTP id 8140637B50D for ; Sun, 28 Apr 2002 22:59:17 -0700 (PDT) Received: from slip-32-102-253-99.ut.us.prserv.net ([32.102.253.99]) by mtiwmhc24.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020429055915.NNFT18857.mtiwmhc24.worldnet.att.net@slip-32-102-253-99.ut.us.prserv.net> for ; Mon, 29 Apr 2002 05:59:15 +0000 Date: Sun, 28 Apr 2002 23:59:11 -0600 (MDT) From: Eric Christian Carlsen X-X-Sender: ecc@dinosaur.byu.edu Reply-To: Eric Christian Carlsen To: freebsd-questions@freebsd.org Subject: freeze on install Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm not sure if this is the right list to ask this question (I've already tried a few - sorry for wasted bandwidth) but I'm not sure what to do. I recently tried to install freebsd 4.5 and it hung on the probing devices step. I've installed freebsd 4.4 on this machine before with a few minor differences. Since I installed 4.4 I've changed my video card and added an internal hardware based pci modem. Here are the specs: Abit KT7E Motherboard Duron 850 MHz processor US Robotics 2977 Internal PCI Hardware modem (works in linux) ATI XPert 2000 Pro Video Card Sound Blaster 16 ISA sound card Logitech optical wheel mouse w/ USB to PS/2 converter I don't have and ide zip drive. I tried to take out the modem and then the install froze with a message that said: mounting root from ufs:/dev/md0c I'm not sure what to do to get FreeBSD installed. Thanks for any help. --- Eric Carlsen ec@byu.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23: 8:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 5E32637B41F for ; Sun, 28 Apr 2002 23:08:18 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id XAA30960; Sun, 28 Apr 2002 23:08:14 -0700 Message-ID: <3CCCE34D.2050101@owt.com> Date: Sun, 28 Apr 2002 23:08:13 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Toomas Aas Cc: Joe & Fhe Barbish , freebsd-questions@FreeBSD.ORG Subject: Re: Hello References: <002801c1ee00$fc2c0ac0$0100a8c0@station1> <200204290601.g3T61ha08467@lv.raad.tartu.ee> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Toomas Aas wrote: > Hello! > > >>The FBSD 4 CD set is available from many FBSD FTP sites. Many people think >>they can just download the ISO image, burn it to CD and away they go. Well >>here a news flash for you, it's not that easy. First of all the ISO image is >>not supported in the MS/Windows world. Sure you can download it and burn it >>to an CD using MS/Windows, but you end up with a data disk, not an bootable >>CD, which it has to be to install from. >> > > What??? > > I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > using MS Windows and they have always turned out right (i.e. > bootable). I have to agree. All of the cdrom burners on Windows support burning isos. Finding out how to do it may be a little obscure but they all do it. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23:19: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-oe64.hotmail.com [216.32.180.157]) by hub.freebsd.org (Postfix) with ESMTP id 172C837B419 for ; Sun, 28 Apr 2002 23:18:58 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 23:18:57 -0700 X-Originating-IP: [216.194.23.53] From: "johnny" To: "Toomas Aas" , "Joe & Fhe Barbish" , References: <002801c1ee00$fc2c0ac0$0100a8c0@station1> <200204290601.g3T61ha08467@lv.raad.tartu.ee> Subject: Re: Hello Date: Mon, 29 Apr 2002 02:30:30 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Message-ID: X-OriginalArrivalTime: 29 Apr 2002 06:18:57.0976 (UTC) FILETIME=[BF06CB80:01C1EF45] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG most likely you burned the iso image correctly but your cdrom isn't a bootable variety. This is probably because you are trying to install on a older computer or have a non (cheap) cd rom. If that's not the case, there are rare situations with cheaper cd-recorders that cannot record the information correctly. Either case it's not an issue since you can find and make the startup floppies very easily. For me i've never had a problem booting the freebsd cdrom from a clean system. > Hello! > > > The FBSD 4 CD set is available from many FBSD FTP sites. Many people think > > they can just download the ISO image, burn it to CD and away they go. Well > > here a news flash for you, it's not that easy. First of all the ISO image is > > not supported in the MS/Windows world. Sure you can download it and burn it > > to an CD using MS/Windows, but you end up with a data disk, not an bootable > > CD, which it has to be to install from. > > What??? > > I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > using MS Windows and they have always turned out right (i.e. > bootable). > -- > Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > * How much net work could a network work, if a network could net work? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23:22:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-oe67.hotmail.com [216.32.180.160]) by hub.freebsd.org (Postfix) with ESMTP id F01AB37B41A for ; Sun, 28 Apr 2002 23:22:13 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 Apr 2002 23:22:13 -0700 X-Originating-IP: [216.194.23.53] From: "johnny" To: "Jody Stonestreet" , References: <000801c1ef40$28214920$4b5591d8@ibm0251706282> Subject: Re: question?? Date: Mon, 29 Apr 2002 02:33:52 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0024_01C1EF26.4CFF25B0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Message-ID: X-OriginalArrivalTime: 29 Apr 2002 06:22:13.0933 (UTC) FILETIME=[33D375D0:01C1EF46] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0024_01C1EF26.4CFF25B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable sounds like a compaq or ibm computer? have you tried using kdmconfig? ----- Original Message -----=20 From: Jody Stonestreet=20 To: questions@freebsd.org=20 Sent: Monday, April 29, 2002 1:38 AM Subject: question?? hello, I recently installed freebsd on my pc. I installed xfree86 4.0. the = problem i have is that the only resolution i can get is 320 x 200. I = have an intel i810 graphics controller. using crtl - alt - + doesn't = change the mode. i've tried to edit the configuration file but i still = can't get it to work. any advice would be helpful. thanks=20 jody ------=_NextPart_000_0024_01C1EF26.4CFF25B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
sounds like a compaq or ibm computer?  have you = tried=20 using kdmconfig?
----- Original Message -----
From:=20 Jody=20 Stonestreet
Sent: Monday, April 29, 2002 = 1:38=20 AM
Subject: question??

hello,
I recently installed freebsd on my = pc. I=20 installed xfree86 4.0. the problem i have is that the only resolution = i can=20 get is 320 x 200. I have an intel i810 graphics controller. using crtl = - alt -=20 + doesn't change the mode. i've tried to edit the configuration file = but i=20 still can't get it to work. any advice would be helpful.
 
thanks
jody
------=_NextPart_000_0024_01C1EF26.4CFF25B0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23:31:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server10.safepages.com (server10.safepages.com [216.127.146.24]) by hub.freebsd.org (Postfix) with ESMTP id 3555337B417 for ; Sun, 28 Apr 2002 23:31:25 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool40-162.nas36.philadelphia1.pa.us.da.qwest.net [65.129.40.162]) by server10.safepages.com (Postfix) with ESMTP id C5FAA3C2BE; Mon, 29 Apr 2002 06:31:16 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: "Tom Hines" , marcus@marcuscom.com Subject: Re: libintl.so.1 not found Date: Mon, 29 Apr 2002 02:31:19 -0400 X-Mailer: KMail [version 1.4] Cc: questions@FreeBSD.ORG References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204290231.19836.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 28 April 2002 16:46, Tom Hines wrote: > > > 1) How do I tell the system I have libintl.so.2 installed and not > > > libintl.so.1? > > > >Rebuild all the ports that depend on libintl.so.1. > > Ah, yes. I guess the reason startx failed was because I hadn't recompiled > X. I have portupgrade set to never upgrade X. > > > > 2) Who is deleting my symlink and why? > > > >Not sure. portupgrade can delete old libs when upgrading if you specify > >the -u option. However, by default, it preserves old libraries in a > >separate directory. > > Hmmm, portupgrade is the culprit. I build things with "portupgrade -R" and > when it's done my symlink is gone. I wonder how I can prevent that because > otherwise portupgrade is useless now. I guess I'll have to go back to the > old "make install" technique. > > Reinstalling gettext-old didn't work. It didn't install a libintl.so.1, so > I removed it again and am going with the symlink for now. > > Thanks. > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > Check your system to see if you have libintl.so.2 instead and if you do just create a symlink to it called libintl.so.1 on that same directory, I had the same problem and I did this and it fixed the problem. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23:31:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from echonyc.com (echonyc.com [198.67.15.2]) by hub.freebsd.org (Postfix) with ESMTP id 95CF837B420 for ; Sun, 28 Apr 2002 23:31:55 -0700 (PDT) Received: from SAVVY.thatcomputerguy.com ([209.10.27.229]) by echonyc.com (8.11.6/8.11.6) with ESMTP id g3T6VoI16694 for ; Mon, 29 Apr 2002 02:31:50 -0400 (EDT) Message-Id: <5.1.0.14.2.20020429023131.00ad1098@echonyc.com> X-Sender: smallfry@echonyc.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 29 Apr 2002 02:31:33 -0400 To: questions@FreeBSD.org From: That Computer Guy Subject: Dell Poweredge 1650/Perc 3/Di Controllers Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've searched, read, googled ... all references seem to indicate that any release after 4.3 should find the 'aac' devices from either the boot floppies or the bootable CD ... I'm baffled - I've loaded FreeBSD v 5.0 onto a machine, built a kernel, and booted to it too - no luck (I made certain option aac was enabled!) .. Is there some trick I don't know about? Or is the Poweredge 1650 somehow built to disallow FreeBSD? Please ?!?!?!? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Apr 28 23:32:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mydomain.com (u152-206.u203-204.giga.net.tw [203.204.152.206]) by hub.freebsd.org (Postfix) with SMTP id 96C8837B436; Sun, 28 Apr 2002 23:32:13 -0700 (PDT) From: ¥@FreeBSD.ORG, [ªo­P´Iºô]@FreeBSD.ORG To: user@FreeBSD.ORG Subject: §ïÅÜ¥[ªo¤è¦¡´N¯àÁÈ¿ú³á!!! KW0syoAsB7LYcrp X-Mailer: 0HPFYBRKapLrtVtP Content-Type: text/plain; Content-Transfer-Encoding: Quoted-Printable X-Priority: 3 X-MSMail-Priority: Normal Message-Id: <20020429063213.96C8837B436@hub.freebsd.org> Date: Sun, 28 Apr 2002 23:32:13 -0700 (PDT) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG =A5u=ADn=B1z=A6=B3=A8T=A8=AE=A9=CE=BE=F7=A8=AE,=A8C=AD=D3=A4=EB=B3=A3=ADn=A5[=AAo~ =A8=BA=B1z=B4N=A4@=A9w=ADn=A8=D3=AC=DD=A4@=A4U,=C5=FD=B1z=A5H=AB=E1=A5[=AAo=A7K=BF=FA=C1=D9=A5i=A5H=C1=C8=BF=FA=A3z~ =A5u=AF=D4=BB~=B1z5=A4=C0=C4=C1=AA=BA=AE=C9=B6=A1,=A6=FD=A6=B3=A5i=AF=E0=B7|=A7=EF=C5=DC=B1z=AA=BA=A4@=A5=CD=B3=E1!!!!! http://cash.why.to http://2c.to/oil http://cash.idv.st To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 0:17:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns3.vmb-service.ru (ns3.vmb-service.ru [80.73.194.253]) by hub.freebsd.org (Postfix) with ESMTP id 32AF837B404 for ; Mon, 29 Apr 2002 00:17:43 -0700 (PDT) Received: from Zakhariev.vmb-service.ru ([80.73.194.121]:52228 "EHLO rusgsm.spb") by ns3.vmb-service.ru with ESMTP id ; Mon, 29 Apr 2002 11:18:39 +0400 Received: from rusgsm.spb [192.168.0.7] by rusgsm.spb [192.168.0.7] with RAW (MDaemon.PRO.PRO.v5.0.4.R) for ; Mon, 29 Apr 2002 11:17:04 +0400 Date: Mon, 29 Apr 2002 11:17:04 +0400 From: postmaster@rusgsm.com Reply-To: postmaster@rusgsm.com Subject: MDaemon Warning - Virus Found To: freebsd-questions@FreeBSD.org X-MDaemon-Deliver-To: freebsd-questions@freebsd.org Message-ID: Mime-Version: 1.0 X-Actual-From: postmaster@rusgsm.com Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The following message had attachment(s) which contained viruses: From : freebsd-questions@FreeBSD.org To : rusgsm@rusgsm.spb Subject : A very good tool Date : Mon, 29 Apr 2002 10:02:58 +0300 Message-ID: <200204290702.g3T72vB06298@Linux.Tmg.Md> Attachment Virus name Action taken ------------------------------------------------------------------------------ cf3049517154.att Exploit.IFrame.FileDownloadRemoved href.exe I-Worm.Klez.h Removed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 0:45:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dns.perimeter.co.za (dns.perimeter.co.za [196.25.164.254]) by hub.freebsd.org (Postfix) with ESMTP id F06E737B41A for ; Mon, 29 Apr 2002 00:45:32 -0700 (PDT) Received: from PATRICK (loopback.mipjhb [209.212.102.245] (may be forged)) by dns.perimeter.co.za (8.11.1/8.11.1) with SMTP id g3T7jKL88644 for ; Mon, 29 Apr 2002 09:45:22 +0200 (SAST) (envelope-from peri@perimeter.co.za) Message-ID: <004301c1ef51$84e9aa60$b50d030a@PATRICK> From: "Patrick O'Reilly" To: "FreeBSD Question List" Subject: Is this someone trying to Crack my box? Date: Mon, 29 Apr 2002 09:43:08 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I have picked up the following in yesterday's /var/log/messages (thank you "daily" :) --------- Apr 28 10:17:58 dns /kernel: pid 80215 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:18:15 dns /kernel: pid 80216 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:18:32 dns /kernel: pid 80217 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:19:06 dns /kernel: pid 80219 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:19:23 dns /kernel: pid 80220 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:20:31 dns /kernel: pid 80241 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 10:20:48 dns /kernel: pid 80250 (sshd), uid 0: exited on signal 11 (core dumped) Apr 28 11:07:14 dns /kernel: pid 80595 (sshd), uid 0: exited on signal 10 (core dumped) Apr 28 11:07:29 dns /kernel: pid 80596 (sshd), uid 0: exited on signal 10 (core dumped) Apr 28 11:07:45 dns /kernel: pid 80597 (sshd), uid 0: exited on signal 10 (core dumped) Apr 28 11:08:01 dns /kernel: pid 80598 (sshd), uid 0: exited on signal 10 (core dumped) Apr 28 11:08:16 dns /kernel: pid 80599 (sshd), uid 0: exited on signal 10 (core dumped) Apr 28 11:08:32 dns /kernel: pid 80600 (sshd), uid 0: exited on signal 10 (core dumped) --------- The message occurs 108 times. The lines above are the first few and last few only. Is this an attempt to break in? This box is still running 4.2-RELEASE with the standard sshd shipped with that release, though bind has been updated to BIND 9.1.3. 'last' reveals nothing untoward, but any decent root kit would take care of that I'm sure. uptime is over 20 days, so the above attempt does not appear to caused a restart. Any wisdom? Regards, Patrick O'Reilly. ___ _ __ / _ )__ __ (_)_ __ ___ _/ /____ __ / __/ -_) _) / ~ ) -_), ,-/ -_) _) /_/ \__/_//_/_/~/_/\__/ \__/\__/_/ http://www.perimeter.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 3:25:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from 0x36.org (plok.0x36.org [81.19.226.253]) by hub.freebsd.org (Postfix) with SMTP id AF63F37B41C for ; Mon, 29 Apr 2002 03:25:36 -0700 (PDT) Received: (qmail 36456 invoked by uid 1000); 29 Apr 2002 10:25:33 -0000 Date: Mon, 29 Apr 2002 12:25:33 +0200 From: cAsto To: Patrick O'Reilly Cc: FreeBSD Question List Subject: Re: Is this someone trying to Crack my box? Message-ID: <20020429122533.A36399@mail.0x36.org> References: <004301c1ef51$84e9aa60$b50d030a@PATRICK> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <004301c1ef51$84e9aa60$b50d030a@PATRICK>; from peri@perimeter.co.za on Mon, Apr 29, 2002 at 09:43:08AM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > This box is still running 4.2-RELEASE with the standard sshd shipped > with that release, though bind has been updated to BIND 9.1.3. You should go and upgrade your sshd (to be more safe), try to look in the advisorylist at: http://www.freebsd.org/security/index.html#adv /cAsto To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 3:33:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from 0x36.org (plok.0x36.org [81.19.226.253]) by hub.freebsd.org (Postfix) with SMTP id 2FBB337B42A for ; Mon, 29 Apr 2002 03:33:33 -0700 (PDT) Received: (qmail 9986 invoked by uid 1000); 27 Apr 2002 11:24:30 -0000 Date: Sat, 27 Apr 2002 11:24:30 +0000 From: cAsto To: freebsd-questions@FreeBSD.ORG Subject: Jails and natd Message-ID: <20020427112430.A9844@mail.0x36.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Problem describtion: I can't connect to external IP's on the server within a jail, needed to send mail from one to another jail. I have setup a server 4.5-STABLE with jails. The server has 2 external IP's: 111.222.333.444 and a alias 111.222.333.555/32 All the jails have IP's in the private range like: 172.16.0.1/32 , 172.16.0.2/32 ... To make this work i have set up natd.conf with the following rules: alias_address 111.222.333.444 same_ports yes redirect_port tcp 172.16.1.3:25 111.222.333.444:25 redirect_port tcp 172.16.1.1:25 111.222.333.555:25 redirect_port tcp 172.16.1.3:25 111.222.333.444:25 172.16.1.1 redirect_port tcp 172.16.1.1:25 111.222.333.555:25 172.16.1.3 When i log into a jail (172.16.1.1) and try to connect to 111.222.333.444 25, i get refused. But its possible to connect to the other internal IP's telnet: connect to address 111.222.333.444: Connection refused telnet: Unable to connect to remote host Other configrution settings: net.inet.ip.forwarding: 1 the ipfw rules is set to open. Regarding the jail enviroment, its possible to get information about the disk structure with df. I don't if thats the idear or not. /cAsto To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 3:37: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.tlmicro.com (12-225-10-4.client.attbi.com [12.225.10.4]) by hub.freebsd.org (Postfix) with ESMTP id 81E3537B400; Mon, 29 Apr 2002 03:36:42 -0700 (PDT) Received: from Sender ([209.216.69.238]) by ns2.tlmicro.com with Microsoft SMTPSVC(5.0.2195.4905); Mon, 29 Apr 2002 03:37:18 -0700 From: Japan To: "" <> Subject: þÅÍÐÉÏÎÁÔ íÉÒÁ ÐÏ ÆÕÔÂÏÌÕ 2002 X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-Priority: 1 X-MSMail-Priority: High Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="= Multipart Boundary 0429021442" Date: Mon, 29 Apr 2002 14:42:17 +0400 Message-ID: X-OriginalArrivalTime: 29 Apr 2002 10:37:20.0078 (UTC) FILETIME=[D6FFD6E0:01C1EF69] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multipart MIME message. --= Multipart Boundary 0429021442 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: 7bit þÅÍÐÉÏÎÁÔ íÉÒÁ ÐÏ ÆÕÔÂÏÌÕ 2002

òïóóéñ-æòáîãéñ – îéþøñ!
òïóóéé ÷ ñðïîéé – ðïâåäá!!!

äÏÒÏÇÉÅ ÄÒÕÚØÑ!

äÌÑ ÔÅÈ, ËÔÏ ×ÐÅÒ×ÙÅ ÓÌÙÛÉÔ Ï ÎÁÓ, ÐÏÚ×ÏÌØÔÅ ÐÒÅÄÓÔÁ×ÉÔØÓÑ – ÎÁÓ ÚÏ×ÕÔ îð «ñÐÏÎÓËÉÊ ãÅÎÔÒ». ÷ ÎÁÛÕ ÄÅÑÔÅÌØÎÏÓÔØ ×ÈÏÄÉÔ ÐÒÁËÔÉÞÅÓËÉ ×ÓÅ, ÞÔÏ ÔÁË ÉÌÉ ÉÎÁÞÅ Ó×ÑÚÁÎÏ Ó ñÐÏÎÉÅÊ É ÑÐÏÎÓËÉÍ ÑÚÙËÏÍ: ÏÔ ÏÂÕÞÅÎÉÑ ÑÚÙËÕ É ÐÅÒÅ×ÏÄÁ ÔÅËÓÔÏ× ÄÏ ÏÒÇÁÎÉÚÁÃÉÉ ÐÅÒÅÇÏ×ÏÒÏ× Ó ËÒÕÐÎÅÊÛÉÍÉ ÑÐÏÎÓËÉÍÉ ËÏÍÐÁÎÉÑÍÉ, ÔÁËÉÍÉ ËÁË «éÔÏÞÕ-ËÏÒÐÏÒÜÊÛλ, «óÁÎÔÏÒÉ», «íÉÃÕÉ-ÂÕÓÓÁλ É ÄÒÕÇÉÍÉ É ÓÏÚÄÁÎÉÑ ÒÅÓÔÏÒÁÎÏ× ÑÐÏÎÓËÏÊ ËÕÈÎÉ × òÏÓÓÉÉ É óîç ÐÏÄ ËÌÀÞ.

îÏ ÓÅÊÞÁÓ – Ï þÅÍÐÉÏÎÁÔÅ ÍÉÒÁ ÐÏ ÆÕÔÂÏÌÕ 2002 Ç. îÅ ÏÄÉÎ ÇÏÄ ÒÁÂÏÔÁÑ Ó ÄÁÌÅËÏÊ É ÎÅ×ÅÄÏÍÏÊ ÂÏÌØÛÉÎÓÔ×Õ ÎÁÛÉÈ ÓÏÏÔÅÞÅÓÔ×ÅÎÎÉËÏ× ÓÔÒÁÎÏÊ, ÍÙ ÎÅ ÍÏÇÌÉ ÏÂÏÊÔÉ ÓÔÏÒÏÎÏÊ ÆÕÔÂÏÌØÎÕÀ ÔÅÍÕ É ÄÏÂÉÌÉÓØ ÐÒÁ×Á ÎÁ ÐÒÏÄÁÖÕ ÂÉÌÅÔÏ× É ÔÕÒÏ× ÎÁ þÅÍÐÉÏÎÁÔ ÍÉÒÁ × ñÐÏÎÉÉ.

÷ Ó×ÑÚÉ Ó ÜÔÉÍ ÐÏÚ×ÏÌØÔÅ ÐÏÂÌÁÇÏÄÁÒÉÔØ ÚÁ ÓÏÔÒÕÄÎÉÞÅÓÔ×Ï ×ÓÅÈ ÔÅÈ, ËÔÏ ÕÖÅ ÏÂÒÁÔÉÌÓÑ × îð «ñÐÏÎÓËÉÊ ãÅÎÔÒ»!

é ÎÁÐÏÍÉÎÁÅÍ, ÞÔÏ ÄÏ 7 ÍÁÑ Õ ÷ÁÓ ÅÝÅ ÅÓÔØ ×ÏÚÍÏÖÎÏÓÔØ ÚÁËÁÚÁÔØ ÂÉÌÅÔÙ ÎÁ þÅÍÐÉÏÎÁÔ íÉÒÁ ÐÏ ÆÕÔÂÏÌÕ 2002 ÉÌÉ ÔÕÒÙ × ñÐÏÎÉÀ Ó ÐÏÓÅÝÅÎÉÅÍ ÆÕÔÂÏÌØÎÙÈ ÍÁÔÞÅÊ! îð «ñÐÏÎÓËÉÊ ãÅÎÔÒ» ÏÂßÑ×ÌÑÅÔ Ï ××ÅÄÅÎÉÉ × ÄÅÊÓÔ×ÉÅ ÄÏÐÏÌÎÉÔÅÌØÎÙÈ ÓËÉÄÏË ÎÁ ÂÉÌÅÔÙ É ÔÕÒÙ! òÁÚÍÅÒ ÓËÉÄÏË ÏÐÒÅÄÅÌÑÅÔÓÑ ËÏÌÉÞÅÓÔ×ÏÍ ÚÁÑ×ÏË!

úÁ ÉÎÆÏÒÍÁÃÉÅÊ ÏÂÒÁÝÁÊÔÅÓØ ÐÏ ÔÅÌ.

248-5775 É 248-5020

îÁÛÉ ÇÁÒÁÎÔÙ ÏÄÎÉ ÉÚ ÓÁÍÙÈ ÎÁÄÅÖÎÙÈ, ÒÅËÏÍÅÎÄÏ×ÁÎÎÙÅ É ÐÒÏ×ÅÒÅÎÎÙÅ ÒÏÓÓÉÊÓËÉÍÉ ËÏÎÓÕÌØÓËÉÍÉ ÕÞÒÅÖÄÅÎÉÑÍÉ × ñÐÏÎÉÉ. ëÓÔÁÔÉ, ÚÁÞÅÍ ÆÕÔÂÏÌ ÖÅÎÝÉÎÁÍ É ÄÅÔÑÍ? äÌÑ ÎÉÈ – ÏÔÄÅÌØÎÙÅ ÐÒÏÇÒÁÍÍÙ. äÌÑ ÂÉÚÎÅÓÍÅÎÏ× ×ÎÅ «ÆÕÔÂÏÌØÎÙÈ» ÄÎÅÊ – ×ÓÔÒÅÞÉ ÐÏ ÉÎÔÅÒÅÓÁÍ. óËÕÞÁÔØ ÎÅ ÂÕÄÅÔÅ!

football-japan@yandex.ru

ðÒÏÓØÂÁ ÒÁÓÓÍÁÔÒÉ×ÁÔØ ÜÔÏ ÓÏÏÂÝÅÎÉÅ ËÁË ÐÏÄÄÅÒÖËÕ óÂÏÒÎÏÊ òÏÓÓÉÉ ÐÏ ÆÕÔÂÏÌÕ ÎÁ þÅÍÐÉÏÎÁÔÅ íÉÒÁ.
üÔÁ ÒÁÓÓÙÌËÁ ÎÏÓÉÔ ÒÁÚÏ×ÙÊ ÈÁÒÁËÔÅÒ.

[O104B95P98H85P93C76T93W92V88N86X88W91H76S83V86D69Y92R85] --= Multipart Boundary 0429021442 Content-Type: image/jpeg; name="opt.jpg" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="opt.jpg" /9j/4AAQSkZJRgABAgAAZABkAAD/7AARRHVja3kAAQAEAAAAKAAA/+4ADkFk b2JlAGTAAAAAAf/bAIQADAgICAkIDAkJDBELCgsRFQ8MDA8VGBMTFRMTGBcS FBQUFBIXFxscHhwbFyQkJyckJDUzMzM1Ozs7Ozs7Ozs7OwENCwsNDg0QDg4Q FA4PDhQUEBEREBQdFBQVFBQdJRoXFxcXGiUgIx4eHiMgKCglJSgoMjIwMjI7 Ozs7Ozs7Ozs7/8AAEQgAZwCMAwEiAAIRAQMRAf/EAK0AAAEFAQEAAAAAAAAA AAAAAAACAwQFBgcBAQEAAwEBAQAAAAAAAAAAAAAAAQIDBQQGEAACAQMCAwIJ CAgFBQAAAAABAgMAEQQSBSExE0EGUWFxkSKS0lMUgaHRMkJSM1SCI8NEhBUW B+FiorLCwXJDY4MRAAEDAgMDCAYJBQAAAAAAAAEAEQISAyExE0FRBGFxgZGh UhQF8NEiYpIWsYLiI1OToxUGwTJCVGT/2gAMAwEAAhEDEQA/AOq0UUUReU1P PHDbXwLcB4PPS5XEcbSHkgLHyAXqLDkZU8CzGBdEihunq9Kx8q2qkyWYEgnI 0mSBnYr2aTKA9Bokc/VDnmabxM6copy4hHq5Oput/Ab8RWKgzNfeLKh3CJml jkKQw8fwz+HpH0Vsdn/X7YA4IBZxpbnbUbXrGAIkPvCTIOYmT/0WmDF44Pmr IsANRNgOZpPUjtfULEX59nhqsTPEOBmmY6v5eXEhC6zpUag2nhfhTBmw4Rj6 5UC5KddHdBpCqFuZGLDSvpCw8Na1TIBhCoF+ghVkBEkEsyuupHx9Iejz48qO rFz1Lbw3FVLDAODKxzIBBMBEk1wFBUlrE6rE86RPDtqskpzYI429OHUyWOlN FxxsRfwVQyv4Nafp2+jJ7G2TK66iWvcW5Xo6sZ+0OPAcaqosaA4xwVy43ee0 0FrarCxLqA3EXHOo642OuTJiGXS+MomkZlsOmWBUo2rhYJpqDcvin7rMYvID FSIguxdtyvBLGeTA+Q+CvRJGV1hhp+9fhVKmNjYsccxzIVjcnS7WAYMuk6Tr tTsWNAuOmOuTE0kjrLGoA0uEAHBNXEcONI3L2D2wMO8OpDEbCT0K060Q4lgP lFLBB4iqhdvjyWcjIR0D+mqD6p1amU8TarSAIsSLGboFAU8+FuFXtyuEmuAg NmOaiQAyPOnKKKK1VUUUUURM5cZlxZYhzkRlHyi1RNly0ytthdeDIOnIvarp 6LKfNVgeVUWZgbjgZr7hs6LMk5vmYDtoDkcOpE3JWtzvzphms51CQkA4ylv5 wmNyhEO6ySzorxTKskTkDUCoKyKDz8Bq7w4uhipGws1rtblc8TXO+9m871uG UYIMLIxoksvpRtqNjfsHK9XozO8m8bfj4ZxnwI5owuXO1xK1vRZY1NtIPazf JXhsW24m5eIPtAQtjdEetdKfByjYtSlOMRIkzeQNI2ZZ8yfxJTl7Z3hzxxx8 kziBvvJHGY9Q8pBqsx2MWTtn80F1iZJpZCLxmAw6cZrdixv9bwNxrYYe3QY+ 3rt5UGAIYzH9nSRYr5Kbz9pSaCFcQjGyMO3wctrhLDToYdqMBYiuhblQKW39 q8V8i5cMhgMAByDJZrdnXJ3WTI28o+O0uGryWvE2QJGsbjnZSNVqTDJHBnYC SyxYWUj5j5azINCPJ020oupfQYfVN62GL1zCgyUSKUfWWM6kv4VJAp6wq2pg A2Szo2usllLkyTnvFixo2NhyKsGjV1DjR6o5dCgadLF2b5BT+fK2Tu8kGIVd s/FhRG46emXdnYkdmnh8taZhw4c+yq6DGlO75Gay6IzEkCA820lmLeTjasrh qERuPYt7BEDckdscByuGVJpmx5sbanVFlgzRLjrxMZikV2GnkbKTakJt2VEj 52MqypgS6oiLhm0szZAiSxGk6iv6Na/SKLCq6Y9S08VJsAMRjynasv0cgRzb ztP60yPKMjHHKaO5sy+B1+etBtgtt+MO0RJz/wC0VIsKLWqRFlncumYYgYHA 7W3JVFFFWWaiRJNM0pM7qFkZVVdNgB5VNL+Gf8xL519ioa7vtmJJPFk5UUUg lYlHYA8bdlenvJsQ4HPh9YVYQmcok9CiqOTjrUv4V/zEvnX2aPhX/MS+dfZq J/Uuw/n4fWFH9S7D+fh9YU059yXwlRXHvDrUv4Z/zEv+j2KPh5B+8S/6PYqI O8mxHlnQ+sK9/qDZG5Z0HrioMJ92XwlTVHeOtPmJxzyXt49HsUxNn40Fx12m cC+lbHl4bLUSXJ7tOGK5MTSNcqBJe7HxXp/b59uGKkRkjDldMq3F/Ia8tXFG 6LZhG24M3czNIIG6O9aEW9MyEiS9IyZyM9rp1dxm0gnFlNxcFbMLHxikvm5S DqS47xwj6zBgWA8OkCvYsbLROnjZS9EfV1LqYDwXpKfzWAv1FGUh5cQpt5LV pcu6eMhIj3YmX0LCEbksHII71ICmKiyKHSZyrcQQRy81Hwx9/L5x7NU7iKwk jeSOBX/X41ypTVw1DxVbY+HBjMXQsSRxLMTw+U1a3cjciJRIMTtUvMSMJRYx zx+hK+Fb38vnHs0fCH38vrf4Vit7/uLMmQ0G0xo0cZsciS51EfdUW4eOkbP/ AHGyTkLFu0cfRc268YKlPGykm4qnibVVL9OxdX9l47R1dPBqqX9tuZbj4T/3 S+vR8IffS+t/hTyOHAZTdSLgjtFKrZc1R/hSP/PL6w9mmLzauj1Xt19Gq41a elrte3hqdUL95/iv2FEXM++ov3kyzbmV/wBoqjt4qv8AvkYP6iy+orlrrfSQ B9UeEGqXVifck9ZR/wAa7FnzngrVqFucyJQFMgIHPnWZ/jnml86tqxVC57cD qQGB+smvkrz5Ke1Ynu5PXHsUa8T3cnrr7FX/AH/y/wDEl8JT5U84/AH5sPWm reKi3ipzVi/ckH6Sn/jS43wQ6mRJWQH0lDLc/NUnz/y8AkTkW2CBdPlXzjbw 4/Mj60vaY+puWOlvtgnyL6X/AErV7exfKdrcS7H56osDctsxslDjYzKzEKZZ HuVB4GwtatLE8TS6kKsxudSm4t2XtXHvecRvcUb8LUzb0hZAJiLj1OZUuzZf 5LW55PxPCW42r4olIyvPiYMAzGQyWr238KpLuFXmAfs3NheqTFlyy+hJhEir qkIAIQdnE9ppcWR1rY+adcU12ilaysAOTEdl+ysL1x4zlHDAkVFg/KVjbuCq MZAjFskvIjbLEquohzYV9K3J0+imNyy8gd1MqYXEiwMoI52+rq8xpzHilznj D30QhkecG2tb8AKs5MPHlw2wnUdCRDGy/wCUixrw8HqT1JgNCQIqlgZS3tyZ E7V7pUW71qRx05AyiMRS7t2Yc64jXtW29d2dz2jIZHiaWAn9VkICVI8duRr3 ZO7G57tkrGsTw49/1uQ6lVA8V+ZrHSnVSxdfdHjeG0dfVjps9T+mPIuj90ZJ Je72A8t9Yi0gn7qkqvzCrmmMTGhxMeLGhGmOFAiDxKLU/XVgGiAdgZfAXpid 25MBhOcpAbgS68qF+8/xX7CptQv3n+K/YVZZrmXfU37yZdv8v+0VR2NdvbAw ncu8EbsebMoJPnFAwMEcseL1F+ivJPg6pGVWZ3L6Dhf5EbFi3Z8PVpxEX1Gd vqriFjRY13D4HC/Lxeov0UfA4X5eL1F+iq+C9/sW3zSf9b9X7K4fY0Wrt52/ APPGiP6C/RXh2zbjzxYT/wDNfop4H3+xT80/836n2VxOL8RfLWu2NS1vsgC7 FrBQB2knlW+G27cvEYsI8ka/RWT7zbTuW57xj4uLiFdtiX0pFssbyMeJYDsU Dtq9vhaT/c/QvLxfn/iIGIs04bZuOplb4OHt+fh/EY79WNyQJIydN1JU8D46 9TbXTJEkwSaEfZu2q/hOq9+Hjqw2vbYNtxFxoOV7sfCx7bVyv+7u4b5i7zHi rlyJt08SywwxnQt19FtWmxaxF+NbTs25xpnGoO7LgxEYyM4xEZcgZdbjkhVQ AVRRwA4D5qV14feL5xXOe4fezctw2yWXckE/8vZYzkEXMqkFmDD7ygc+2uiL BjMoYRoQeIOkcq0ZlKV14feL5xXnxON71PWFe/D4/uk9UV70Yfdr5hREn4nG 96nrD6aPicb3qesPppXRh+4vmFHRh+4vmFESficf3qesKidROtr1DR8T9a4t +B4amdCH3a+YV70o9OnQunnawtREuiiiiIooooiKKKKIksbKTz8VQcTcIZMJ M4nRDJEJmJ+ypXUb+Sp5Nhes3u21Cfac3Z48n4ePL1iGReJRZDrKEeC5I8lE UfB/uh3QzZFiXJeGSRgqLMjKCSbD0hqHHy1abvs+0buqrueJFlaL6DIt2W9r 6WHEXtXD27kd5V3J9vjxWZ4j+OOEOk8nEhsLfPXZJd1bHwEfJYdaOIGcpxGo Ld9PK/G9FCr323a9kwnw9si6MDM0jLqLekQO1iTyFa7BTp4UEf3I0Xj4lArl vd87r3w7yplsZINoxG1MoJVSAfRQ24MzHn4q6wOVEC9oooopRRRRREUUUURF FFFERRRRREUUUURJcAqQxsPDVRn7fiTcDkrGez0wDRRRFWybLljhDukVvBLp b51ZDSDsmMyn47cYdNvTAdVFu292NFFFGCudmxdrhxkG3TRSY44J0GUp8hU1 a0UUUoooooiKKKKIiiiiiL//2Q== --= Multipart Boundary 0429021442-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 3:51:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from socrates.cepa.com.br (socrates.cepa.com.br [200.231.199.8]) by hub.freebsd.org (Postfix) with SMTP id B193F37B404 for ; Mon, 29 Apr 2002 03:51:20 -0700 (PDT) Received: (qmail 5406 invoked by uid 204); 29 Apr 2002 10:51:15 -0000 Received: from rafael@cas.com.br by socrates.cepa.com.br by uid 201 with qmail-scanner-1.10 (hbedv: 6.12.0.0. . Clear:0. Processed in 0.445341 secs); 29 Apr 2002 10:51:15 -0000 Received: from 104-204.cepa.com.br (HELO beto.cas.com.br) (200.246.104.204) by socrates.cepa.com.br with SMTP; 29 Apr 2002 10:51:14 -0000 Message-ID: <006201c1ef6b$fa6ef780$1100a8c0@cas.com.br> From: "Gasparetti" To: Subject: Kernel Panics Date: Mon, 29 Apr 2002 07:52:37 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_005F_01C1EF52.D4AC4160" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_005F_01C1EF52.D4AC4160 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear Sirs, I'm totally new to the FreeBSD world and I already started with a = big problem! I have a COMPAQ Presario computer, with 192M of RAM, 28G = HD, webcam, but I don't know certainly what kind of motherboard I have. Well, after the installation process (4.5 version), when the system = reboots it's showed a message about kernel panics, page fault, etc... I = read in some documents, that i need to get the "instruction pointer" and = use some commands like "grep" to use the instruction pointer value and = get some output. But I don't know how to do this, because there's always = an "ok shell" wich I can't get out of it. So I have some questions:=20 1. What I really should do to repair that kernel panic and run FreeBSD = (step by step, please!)? 2. Is there some good documentation to do this (What I mentioned above I = read in a FAQ)? 3. It could be a motherboard problem (so I'll never run FreBSD on my = machine)? I hope you could help me. Thanks a lot! Best Regards, Rafael=20 ------=_NextPart_000_005F_01C1EF52.D4AC4160 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Dear Sirs,
 
    I'm totally new to the FreeBSD = world and I=20 already started with a big problem! I have a COMPAQ Presario computer, = with 192M=20 of RAM, 28G HD, webcam, but I don't know certainly what kind of = motherboard I=20 have.
    Well, after the installation = process (4.5=20 version), when the system reboots it's showed a message about kernel = panics,=20 page fault, etc... I read in some documents, that i need to get the = "instruction=20 pointer" and use some commands like "grep" to use the instruction = pointer value=20 and get some output. But I don't know how to do this, because = there's=20 always an "ok shell" wich I can't get out of it.
    So I have some=20 questions: 
1. What I really should do to repair that = kernel panic=20 and run FreeBSD (step by step, please!)?
2. Is there some good documentation to do this (What = I=20 mentioned above I read in a FAQ)?
3. It could be a motherboard problem (so I'll never = run FreBSD=20 on my machine)?
 
I hope you could help me. Thanks a lot!
 
Best Regards,
Rafael 
------=_NextPart_000_005F_01C1EF52.D4AC4160-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4: 2:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.w2.ru (fpmk-gw.tsu.ru [212.192.100.22]) by hub.freebsd.org (Postfix) with ESMTP id 7D3E237B405 for ; Mon, 29 Apr 2002 04:02:04 -0700 (PDT) Received: from isc.tsu.ru (isc.tsu.ru [212.192.98.163]) by www.w2.ru (8.11.6/linuxconf) with ESMTP id g3TB21j21366 for ; Mon, 29 Apr 2002 19:02:01 +0800 Received: by isc.tsu.ru (Postfix, from userid 1001) id 3CE38D5F0; Mon, 29 Apr 2002 19:01:56 +0800 (KRAST) To: questions@FreeBSD.org Subject: XFree86/dga, dga2 Message-Id: <20020429110156.3CE38D5F0@isc.tsu.ru> Date: Mon, 29 Apr 2002 19:01:56 +0800 (KRAST) From: alter@isc.tsu.ru Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does FreeBSD with XFree86 supports dga, dga2? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:18:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id A911037B404 for ; Mon, 29 Apr 2002 04:18:38 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 9F66749AB2; Mon, 29 Apr 2002 13:18:49 +0200 (CEST) Date: Mon, 29 Apr 2002 13:18:49 +0200 From: Axel Scheepers To: Jason Cribbins Cc: James Long , questions@FreeBSD.ORG Subject: Re: make world lasts longer than the energizer bunny Message-ID: <20020429131849.C61218@mars.thuis> Reply-To: Axel Scheepers References: <005201c1ec7b$03ad34e0$15841bd8@kibserv.org> <20020425124811.A3066@ns.museum.rain.com> <003701c1eca2$b616f720$15841bd8@kibserv.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <003701c1eca2$b616f720$15841bd8@kibserv.org>; from freebsdlist@kibserv.org on Thu, Apr 25, 2002 at 05:46:47PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Apr 25, 2002 at 05:46:47PM -0400, Jason Cribbins wrote: > : > This is a keyboardless box (something fried on motherboard long ago) > that I > : > had to initiate the make world through telnet on a windoze box. If I > had > : > know it was going to take this much time I would have telneted from > another > : > freebsd box. My windoze machines typically need to be rebooted every > few > : > days to clean up memory leaks. > : > I might be in trouble here. > : > : Tip 1: run the make in the background. For instance I have a > : script called /root/mbw which does a little prep, and the > : "make buildworld" step. I invoke it thusly: > : > : /root/mbw >mbw.out 2>&1 & > : > That is a good idea. > Thanks > Hi, How about doing the actual compile on the other machine? I have an old 486-33/16MB acting as an internet gateway/firewall. When I make world (my other 2 are also running fBSD, I usually make buildworld on the fastest machine and export the generated /usr/obj using nfs to the other hosts. On the other hosts I can type make installworld, which then does the job way faster, since it doesn't have to compile anymore. :) Took only half an hour on the 486 btw. UNIX is great ;-) Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ A conclusion is simply the place where someone got tired of thinking. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:24:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from whale.sunbay.crimea.ua (whale.sunbay.crimea.ua [212.110.138.65]) by hub.freebsd.org (Postfix) with ESMTP id DDFCE37B404 for ; Mon, 29 Apr 2002 04:24:25 -0700 (PDT) Received: (from ru@localhost) by whale.sunbay.crimea.ua (8.11.6/8.11.2) id g3TBO6g34001; Mon, 29 Apr 2002 14:24:06 +0300 (EEST) (envelope-from ru) Date: Mon, 29 Apr 2002 14:24:06 +0300 From: Ruslan Ermilov To: uwi mAn Cc: questions@FreeBSD.ORG Subject: Re: i810 on Xfree86 4.2.0 Message-ID: <20020429112406.GD25478@sunbay.com> References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="+B+y8wtTXqdUj1xM" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --+B+y8wtTXqdUj1xM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Apr 28, 2002 at 10:38:53PM -0400, uwi mAn wrote: >=20 > I have a problem with builtin intel video card i810. > I have compiled agp support in kernel. [device agp] Added driver "i810" t= o=20 > x config [ran xf86config] > when I do startx withing several seconds the system reboots.. >=20 > Any clue? >=20 Section "Device" Identifier "i810" Driver "i810" #VideoRam 8192 Option "NoDDC" ^^^^^^^^^^^^^^^^^^^ # Insert Clocks lines here if appropriate EndSection Cheers, --=20 Ruslan Ermilov Sysadmin and DBA, ru@sunbay.com Sunbay Software AG, ru@FreeBSD.org FreeBSD committer, +380.652.512.251 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age --+B+y8wtTXqdUj1xM Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8zS1WUkv4P6juNwoRAugvAKCChaOjydJhkrQMw3JIErj/J9YNYACfczhV wPN/zdBWnBGYotAmdsnXsr0= =5nVG -----END PGP SIGNATURE----- --+B+y8wtTXqdUj1xM-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:28:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from groggy.anc.acsalaska.net (groggy.anc.acsalaska.net [208.151.119.232]) by hub.freebsd.org (Postfix) with ESMTP id 5520B37B400 for ; Mon, 29 Apr 2002 04:28:08 -0700 (PDT) Received: (from abc@localhost) by groggy.anc.acsalaska.net (8.11.6/8.11.6) id g3TBWdB39021 for "freebsd-questions" ; Mon, 29 Apr 2002 11:32:39 GMT (envelope-from groggy11@mail.com) Date: Mon, 29 Apr 2002 11:32:39 GMT From: groggy11@mail.com Message-Id: <200204291132.g3TBWdB39021@groggy.anc.acsalaska.net> X-Authentication-Warning: en26.groggy.anc.acsalaska.net: abc set sender to groggy11@mail.com using -f Subject: private IP/sendmail X-Mailer: Umail v2.3 To: "freebsd-questions" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ok - i want to put up a post of the simple answer to a question that has plagued me for years. if this email succeeds in being posted, the solution is in place. PROBLEM: emailing some domains (such as freebsd.org) from a private IP machine behind a "ppp -nat" gateway result in a: "stat=Deferred: 450 : helo command rejected: Host not found" error in sendmails log. SOLUTION: enter "DjPPP-NAT-HOSTNAME" in the /etc/mail/sendmail.cw file of the machines with private IPs that are using/behind the "ppp -nat" gateway. heh. i can't help but humor myself as to how simple the answer is and how many lengthy technical responses i had to parse and study to dig out an answer - but i guess that's the BSD way hehe. thanks for everyone that took time to write and explain things. the cooperative effort and sharing of knowledge of free unix projects are always amazing to see at work. and pretty humbling when one consider the intelligence of the various people behind the projects that are willing to take the time to write and explain to most anyone. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:42:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id E921E37B405 for ; Mon, 29 Apr 2002 04:42:33 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 5C93749ABD; Mon, 29 Apr 2002 13:42:45 +0200 (CEST) Date: Mon, 29 Apr 2002 13:42:45 +0200 From: Axel Scheepers To: uwi mAn Cc: questions@freebsd.org Subject: Re: mpg123 Message-ID: <20020429134245.D61218@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from uwiman3k@hotmail.com on Thu, Apr 25, 2002 at 01:59:22PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, Apr 25, 2002 at 01:59:22PM -0400, uwi mAn wrote: > attempting to use mpg123 with cache: > mpg123 -b 1024 mp3 > results the following > > Yuck! Error in buffer handling....Undefined error:0 > > What can be done to solve the problem? Hi, Rather difficult to say, I looked into the source and it seems to go wrong on filling the buffer in time. buffer.c: ... if(!done) { cmd = xfermem_block(XF_READER, xf); switch(cmd) { /* More input pending. */ case XF_CMD_WAKEUP_INFO: continue; /* Yes, we know buffer is low but * know we don't care. */ case XF_CMD_WAKEUP: break; /* Proceed playing. */ case XF_CMD_TERMINATE: /* Proceed playing without * blocking any further. */ done=TRUE; break; case -1: if(errno==EINTR) continue; perror("Yuck! Error in buffer handling..."); done = TRUE; xf->readindex = xf->freeindex; xfermem_putcmd(xf->fd[XF_READER], XF_CMD_TERMINATE); break; ... The xfermem_block( XF_READER(1), xf) call goes wrong, so lets see what's in it: int xfermem_block (int readwrite, txfermem *xf) { int myfd = xf->fd[readwrite]; int result; xf->wakeme[readwrite] = TRUE; if (xf->wakeme[1 - readwrite]) xfermem_putcmd (myfd, XF_CMD_WAKEUP); result = xfermem_getcmd(myfd, TRUE); xf->wakeme[readwrite] = FALSE; return ((result <= 0) ? -1 : result); } That shows us that the call to xfermem_getcmd returns a negative value, indicating something went wrong. When you browse xfermem.c and xfermem.h you'll see it is trying to read and write to a file by issueing those calls, so it seems to me there's something wrong reading from the file. Does the problem occur on other mp3's as well? It might also help to compile it with the -g option, so that debug information is generated, then you can execute it using gdb: freebsd# gdb mpg123 gdb> run -s 1024 test.mp3 Program exited with error code -1 gdb> bt The output of the bt command shows us where exactly things start to go wrong, and might give some more clues about what is going on at the time. You can also set a breakpoint at the xfermem_block function, so you can step through the code and print the symbols values: freebsd# gdb mpg123 gdb> b xfermem_block Breakpoint set at 0x00231234 something gdb> run -s 1024 test.mp3 Breakpoint #1: xfermem_block gdb> print xf->fd[1] gdb> n int myfd = xf->fd[readwrite]; gdb> etc. ... gdb> > > > Thanks. > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Hope it's helpfull, Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Indifference will be the downfall of mankind, but who cares? ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:48:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id 8B1D737B41A for ; Mon, 29 Apr 2002 04:48:37 -0700 (PDT) Received: from max ([24.61.57.241]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020429114837.BRAZ9799.rwcrmhc51.attbi.com@max> for ; Mon, 29 Apr 2002 11:48:37 +0000 Message-ID: <200204290748430369.0D49CFA4@mail.attbi.com> In-Reply-To: References: X-Mailer: Calypso Version 3.30.00.00 (4) Date: Mon, 29 Apr 2002 07:48:43 -0400 Reply-To: jdarnold@buddydog.org From: "Jonathan Arnold" To: freebsd-questions@FreeBSD.ORG Subject: RE: Hello Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >The FBSD 4 CD set is available from many FBSD FTP sites. Many people think >they can just download the ISO image, burn it to CD and away they go. Well >here a news flash for you, it's not that easy. First of all the ISO image >is not supported in the MS/Windows world. Sure you can download it and= burn it Wrong. That's exactly the process I used and it worked just fine. An ISO image is just that - an ISO image, and any reasonable CD writing program should work just fine. I used EZ-CD Creator, but I'm sure all the others will work just fine. >a fast internet connection, (IE: ISDN,DSL,CABLE) to download over. Using= an It is big, of course. So yes, you need to download it on a fast connection. Other sources for it: 1] My local CompUSA had a box, which contained the 4 disk set + 6 disks of (undocumented!) packages, plus the excellent book "Complete FreeBSD". 2] http://www.cheapbytes.com has the 4 disk set of $12.99 + s&h 3] The new book "FreeBSD Unleashed" has 2 CDs in it, the 4.5 & 5.0 installs CDs. -- Jonathan Arnold (mailto:jdarnold@buddydog.org) Daemon Dancing in the Dark, a FreeBSD weblog: http://jdarnold.tzo.com/FreeBSD To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 4:53: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ceca.es (mail.ceca.es [80.68.128.18]) by hub.freebsd.org (Postfix) with ESMTP id EA5DE37B404 for ; Mon, 29 Apr 2002 04:52:54 -0700 (PDT) Received: from mulhacen.caja-granada.es ([192.168.25.2]) by mail.ceca.es (8.8.8+Sun/8.8.8) with ESMTP id NAA15738 for ; Mon, 29 Apr 2002 13:52:53 +0200 (MET DST) Received: from CORREOEX.caja-granada.es (sccpd00 [130.130.7.3]) by mulhacen.caja-granada.es (8.11.6/8.11.6) with ESMTP id g3TBpxR82269 for ; Mon, 29 Apr 2002 13:51:59 +0200 (CEST) X-RAV-AntiVirus: Este correo ha sido escaneado buscando virus en el host: mulhacen.caja-granada.es Received: from CORREOEX.caja-granada.es (sccpd00 [130.130.7.3]) by mulhacen.caja-granada.es (8.11.6/8.11.6) with ESMTP id g3TBpxR82269 for ; Mon, 29 Apr 2002 13:51:59 +0200 (CEST) (envelope-from JMegias@caja-granada.es) Received: by correoex.caja-granada.es with Internet Mail Service (5.5.2653.19) id ; Mon, 29 Apr 2002 13:57:08 +0200 Message-ID: <1A4723CDE42AD611B61200A0C9AA5F3729BC87@correoex.caja-granada.es> From: "Megias Sanchez, Jose Manuel" To: "'questions@FreeBSD.ORG'" Subject: Adding LDAP support to sendmail in FBSD stable Date: Mon, 29 Apr 2002 13:57:06 +0200 X-Mailer: Internet Mail Service (5.5.2653.19) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I've just updated my computer to FreeBSD 4.5 stable with sendmail 8.12.2 and now I would like to add the LDAP support. How do I proceed to enable LDAP support?. Greetings. Jose Megias To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5: 1:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (lennier.tninet.se [195.100.94.105]) by hub.freebsd.org (Postfix) with ESMTP id E99EF37B419 for ; Mon, 29 Apr 2002 05:01:05 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by lennier.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 516240.81664.1020.1s28060234lennier ; Mon, 29 Apr 2002 14:01:04 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Lutz Horn Subject: Re: Xircom CreditCard 10/100 Configuration Date: Mon, 29 Apr 2002 14:01:03 +0200 X-Mailer: KMail [version 1.4] Cc: freebsd-questions@FreeBSD.ORG References: <20020427134911.GA2993@lutz-horn.de> <20020427185238.D296@fishballoon.dyndns.org> <20020428103959.GA2782@lutz-horn.de> In-Reply-To: <20020428103959.GA2782@lutz-horn.de> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204291401.03502.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 28 April 2002 12:39 pm, Lutz Horn wrote: > Hi Scott, > > * Scott Mitchell [20020427 18:52 +0100]: > > What, if anything, is in /etc/pccard.conf on your system? Have you > > changed anything in /etc/defaults/pccard.conf? Right down towards th= e > > end of that file you should see the following: > > > > card "Xircom" "CreditCard 10/100" > > config auto "xe" ? > > insert /etc/pccard_ether $device start > > remove /etc/pccard_ether $device stop > wild shot in the dark time. run this (its all one line) dmesg | grep -i 'irq [0-9][0-9]*' | =20 sed 's/\(^[a-z0-9]*[: ]\).*\(irq [0-9][0-9]*\).*/\1 \2/' | sort -n +2 -= 3 and see what irqs are being reported as in use try the following pccardd.conf assuming irq 3 is not in use by something= =20 else.... like sio1: for example..... # pccardd.conf io=090x240-0x360 irq=093=20 # Available memory slots memory=090xd4000 96k # Xircom CreditCard Ethernet CE3-10/100 card "Xircom" "CreditCard 10/100" =09config=09auto "xe" ? =09insert=09/etc/pccard_ether $device start =09remove=09/etc/pccard_ether $device stop To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5: 3:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 0755737B400 for ; Mon, 29 Apr 2002 05:03:34 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 307B549AB2; Mon, 29 Apr 2002 14:03:45 +0200 (CEST) Date: Mon, 29 Apr 2002 14:03:45 +0200 From: Axel Scheepers To: Jimmy Cc: freebsd-questions@freebsd.org Subject: Re: ipfilter+ipfw Message-ID: <20020429140344.E61218@mars.thuis> Reply-To: Axel Scheepers References: <20020426143406.5d9ede72.jimmy@tricom.com.ph> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020426143406.5d9ede72.jimmy@tricom.com.ph>; from jimmy@tricom.com.ph on Fri, Apr 26, 2002 at 02:34:06PM +0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, Apr 26, 2002 at 02:34:06PM +0800, Jimmy wrote: > Hi, > > I've configure my FreeBSD-4.5-STABLE firewall host, and I installed 4 NIC cards on it and I'm using ipfilter to NAT and packet filter & ipfw to bridge and as a traffic shaper. Here are the following list of my NIC card: > > fxp0=localnet1(192.168.100.0/24)nat > xl0=external interface connected to dsl modem > xl1=localnet2(192.168.200.0/24)nat > xl2=filter bridge to xl0 > > The outside world can see my host connected to the bridge NIC and vice versa, except my localnet1 and localnet2. Do I missed something in my configuration? How can I connect my localnet1 & 2 to talk to host connected to xl2 which is being bridge. Hi, It is general a bad idea to mix ipf and ipfilter, ipfilter and ipnat combo works directly on the kernel tables, while ipf runs in userspace and is thus somewhat slower. The 192.168.x.x aren't routed on the internet, and must be remangled to the modem's ip. (NAT) This seems to go wrong. At my place I have ipfilter/ipnat where ipnat does the following: map 192.168.0.0/16 -> 0/32 portmap auto map 192.168.0.0/16 -> 0/32 proxy ftp rdr 0.0.0.0/0 port 80 -> 192.168.0.5 port 80 which directs all traffic to another host in my local lan. You can use tcpdump to see what packets are being forwarded (did you sysctl -w net.inet.ip.forwarding=1?) A couple of extra debug generating rules isn't bad either, to see what gets denied and what goes through. Probably best solution is to stick with one of the two firewalls, instead of using both at the same time. > > TIA, > > Jimmy > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ A fanatic is one who can't change his mind and won't change the subject. -- Winston Churchill ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:11:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id A9A5B37B41A for ; Mon, 29 Apr 2002 05:11:28 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id DC43F49AB2; Mon, 29 Apr 2002 14:11:40 +0200 (CEST) Date: Mon, 29 Apr 2002 14:11:40 +0200 From: Axel Scheepers To: Ivan Episkop Cc: freebsd-questions@FreeBSD.ORG Subject: Re: question Message-ID: <20020429141140.F61218@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from episkop@inbox.ru on Sat, Apr 27, 2002 at 02:41:17PM +0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Apr 27, 2002 at 02:41:17PM +0400, Ivan Episkop wrote: > How to install ext. modem, int. modem Hi, Most of the time it's just pluging it in, which does the trick. Look for extra serial ports at the next boot, using dmesg. The new one is your modem, which you can test by starting op some terminal program, i.e. cu or kermit and type at. The modem should respond with 'OK'. (or just try it out using your ppp script) > where i can get help about free BSD & firewall for BSD There are 2 firewalls to choose from, ipf or ip filter. Ip filter is a bit faster then ipf, but tends be a bit more difficult to setup. Both can do statefull filtering and NAT (remember ppp has built-in nat and you should use that when using the modem to connect to internet) Both manpages supply information and on the internet are lots of examples for both of them. (just search for ip filter example or ipf example) Same goes for sendmail. If you want to use it, Postfix is a nice alternative which has more understandle config files and is IMHO easier to setup/maintain. Docs are on www.postfix.org. > & sendmail if you have any information about this pls > mail me as soon as you can > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Fairy Tale, n.: A horror story to prepare children for the newspapers. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:17:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id CF82437B400 for ; Mon, 29 Apr 2002 05:17:27 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 56B0249AB2; Mon, 29 Apr 2002 14:17:39 +0200 (CEST) Date: Mon, 29 Apr 2002 14:17:39 +0200 From: Axel Scheepers To: Lutz Horn Cc: Scott Mitchell , freebsd-questions@freebsd.org Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020429141739.G61218@mars.thuis> Reply-To: Axel Scheepers References: <20020427134911.GA2993@lutz-horn.de> <20020427172805.GA5550@lutz-horn.de> <20020427185238.D296@fishballoon.dyndns.org> <20020428103959.GA2782@lutz-horn.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020428103959.GA2782@lutz-horn.de>; from lutz@lutz-horn.de on Sun, Apr 28, 2002 at 12:39:59PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Just to mention; there is a problem with the driver for some cards. I have a CEM28 combo card, of which only the modem works, same problems as you for the net part. I tried to make it work by hard coding some values in the driver, which got it activated, but the MAC address was wrong and it didn't work right. For now I'm stuck with it. NetBSD people say the driver needs to be rewritten but that's too much work for me right now (and I lack the knowledge to do so ;) So, until somebody fixes the driver so it works for all the noncardbus 16bit Xircom cards, I guess it's a dead end. Sorry. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ "Irrationality is the square root of all evil" -- Douglas Hofstadter ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:19:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from go4.ext.ti.com (dlezb.ext.ti.com [192.91.75.132]) by hub.freebsd.org (Postfix) with ESMTP id D02D937B405 for ; Mon, 29 Apr 2002 05:19:37 -0700 (PDT) Received: from dlep6.itg.ti.com ([157.170.188.9]) by go4.ext.ti.com (8.11.6/8.11.6) with ESMTP id g3TCJVd17240; Mon, 29 Apr 2002 07:19:31 -0500 (CDT) Received: from dlep6.itg.ti.com (localhost [127.0.0.1]) by dlep6.itg.ti.com (8.9.3/8.9.3) with ESMTP id HAA02929; Mon, 29 Apr 2002 07:19:31 -0500 (CDT) Received: from popsvr.india.ti.com (popsvr.india.ti.com [157.87.95.215]) by dlep6.itg.ti.com (8.9.3/8.9.3) with ESMTP id HAA02877; Mon, 29 Apr 2002 07:19:29 -0500 (CDT) Received: from gautham ([192.168.185.126]) by popsvr.india.ti.com (8.8.8/8.8.8) with SMTP id RAA03163; Mon, 29 Apr 2002 17:49:23 +0530 (IST) Message-ID: <005501c1ef78$534e02e0$1901a8c0@ti.com> Reply-To: "Gautham Ganapathy" From: "Gautham Ganapathy" To: "Joe Marcus Clarke" Cc: "FreeBSD.org - Questions" References: <01a401c1ed04$84e88e90$1901a8c0@ti.com> <1019838687.312.52.camel@gyros.marcuscom.com> Subject: Re: Nautilus Date: Mon, 29 Apr 2002 17:50:27 +0530 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, April 26, 2002 10:01 PM, From: "Joe Marcus Clarke wrote > On Fri, 2002-04-26 at 06:26, Gautham Ganapathy wrote: > > Hi > > > > I have installed FreeBSD 4.5-RELEASE. I have configured it to startup > > with GNOME. However, nautilus windows seems to take a long time to > > start. when i click on a folder, it waits a long time before it displays > > the files (list format) even though there is almost no disk activity. is > > this a problem with the nautilus ? these delays don't appear under linux > > in the same system > > Nautilus is a beast. I see delays when compared to the older gmc. You > may be able to get better performance by upgrading to the latest GNOME > 1.4.x bits from ports. > > Joe > I am using FreeBSD 4.5 Feb 2002 release with GNOME 1.4. The CDs don't seem to contain much of KDE, do they ? I think I'll just keep myself from using any file managers. Also, GNOME office is not on the CDs. Will it be included in the next release ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:40:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from frontend2.aha.ru (bird.zenon.net [213.189.198.215]) by hub.freebsd.org (Postfix) with ESMTP id C2B0337B404; Mon, 29 Apr 2002 05:40:36 -0700 (PDT) Received: from [195.151.197.36] (HELO 127.0.0.1) by frontend2.aha.ru (CommuniGate Pro SMTP 3.5.9) with ESMTP-TLS id 117541934; Mon, 29 Apr 2002 16:40:35 +0400 Date: Mon, 29 Apr 2002 16:40:33 +0400 From: Anton Shcherbinin X-Mailer: The Bat! (v1.53d) X-Priority: 3 (Normal) Message-ID: <2344249640.20020429164033@fastmail.fm> To: Greg 'groggy' Lehey Cc: freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it? In-Reply-To: <20020429120322.A15117@wantadilla.lemis.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429120322.A15117@wantadilla.lemis.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Monday, April 29, 2002, 6:33:22, Greg 'groggy' Lehey wrote: > On Sunday, 28 April 2002 at 23:17:38 +0400, Anton Shcherbinin wrote: >> As I have already said, the same happens with any application and any >> host. E. g., with ftp and ftp.freebsd.org : >> 1) my host queries our DNS server for AAAA record of ftp.freebsd.org >> 2) query times out in 5 secs >> 3) the same query >> 4) query times out in 10 secs >> 5) the same query >> 6) query times out in 20 secs >> 7) the same query >> 8) query times out in 40 secs >> 9) the same query, *but* for A record; DNS server replies in some ms, >> and then everything goes great, my host quickly connects >> to ftp.freebsd.org:21 etc. >> >> How can I fix that? >> >> The only thing I could think of is to disable IPv6 at all. But wait a >> second: >> >> $ grep -i ipv6_enable /etc/rc* /etc/defaults/* >> /etc/rc:case ${ipv6_enable} in >> /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. >> >> ^^^^^^^^^^^^^^^^ >> Does not it mean that IPv6 is already disabled? > Well, there are a number more IPV6 options than enable. Maybe one of > the others is set incorrectly. Note that this is the resolver library > trying for all it's worth to get an AAAA record. It could do that > even if you didn't have any IPV6 network interfaces. I'd start by > comparing your /etc with the /etc in the distribution. I have just reinstalled FreeBSD from the CD burned from ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/4.5/4.5-install.iso The problem remained :(( I did not touch any file including /etc/* I did not change anything after installation. `ping some.host.net` works fine. `ftp some.host.net` and `telnet some.host.net any-port` both start working only after 4 queries of AAAA records time out. So, Greg, I followed your advice, I have got standard /etc/* from the distribution now. ping resolves domain names as expected, but not ftp and telnet. Why? Have anybody ever heard of such a trouble or am I the only man on the Earth experiencing it? :-( Another thing: when my brand-new FreeBSD 4.5 Release installation boots, I see among others such a message: Starting standard daemons: inetd cron sshd usbd sendmail the cursor stops after `sendmail' and it takes boot process exactly 2 min 30 seconds to go further. Looks like two 75-second timeouts (2 series of 5+10+20+40 s timeouts). If I mis-installed FreeBSD, what could I have done wrong? I am loosing hope to have a chance to enjoy FreeBSD, so please help me. Many thanks in advance for any clue, advice or explanation. -- Anton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:48:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp0.adl1.internode.on.net (smtp0.adl1.internode.on.net [203.16.214.194]) by hub.freebsd.org (Postfix) with ESMTP id C02EE37B41B for ; Mon, 29 Apr 2002 05:48:25 -0700 (PDT) Received: from midget.dons.net.au (ppp424.sa.adsl.on.net [150.101.244.167]) by smtp0.adl1.internode.on.net (8.11.6/8.11.6) with ESMTP id g3TCmMT55446; Mon, 29 Apr 2002 22:18:22 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Received: from localhost (root@localhost [127.0.0.1]) by midget.dons.net.au (8.12.2/8.12.2) with ESMTP id g3TCmA52018089; Mon, 29 Apr 2002 22:18:12 +0930 (CST) (envelope-from doconnor@gsoft.com.au) Subject: Re: Clock adjustment? From: "Daniel O'Connor" To: SNFettig Cc: freebsd-questions@freebsd.org In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 22:18:15 +0930 Message-Id: <1020084497.10959.1.camel@chowder.dons.net.au> Mime-Version: 1.0 X-Spam-Status: No, hits=-5 required=5 X-Spam-Level: (-5) X-Scanned-By: MIMEDefang 2.6 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-04-29 at 21:55, SNFettig wrote: > The way that I have set this up is by following the cheat-sheet from Dan > O'Connor (http://www.mostgraveconcern.com/freebsd/ntp.html)*. Over time I > have made tweaks from other howto areas on the net, but this is pretty much > it: Oops.. I forgot to mention.. I can't really use ntp as the system isn't dialed up very frequently (ie about an hour a day maximum) and I currently use ntpdate to adjust the date at each dialup. The cumulative difference is around 120 seconds. I was recently informed that you can adjust the machdep.i8254_freq sysctl which should do what I want.. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 9A8C 569F 685A D928 5140 AE4B 319B 41F4 5D17 FDD5 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 5:53:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id BAFF937B41A for ; Mon, 29 Apr 2002 05:53:31 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id C4E2849AB2; Mon, 29 Apr 2002 14:53:43 +0200 (CEST) Date: Mon, 29 Apr 2002 14:53:43 +0200 From: Axel Scheepers To: Gasparetti Cc: freebsd-questions@freebsd.org Subject: Re: Kernel Panics Message-ID: <20020429145343.H61218@mars.thuis> Reply-To: Axel Scheepers References: <006201c1ef6b$fa6ef780$1100a8c0@cas.com.br> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <006201c1ef6b$fa6ef780$1100a8c0@cas.com.br>; from rafael@cas.com.br on Mon, Apr 29, 2002 at 07:52:37AM -0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, On Mon, Apr 29, 2002 at 07:52:37AM -0300, Gasparetti wrote: > Dear Sirs, > > I'm totally new to the FreeBSD world and I already started with a big problem! I have a COMPAQ Presario computer, with 192M of RAM, 28G HD, webcam, but I don't know certainly what kind of motherboard I have. > Well, after the installation process (4.5 version), when the system reboots it's showed a message about kernel panics, page fault, etc... I read in some documents, that i need to get the "instruction pointer" and use some commands like "grep" to use the instruction pointer value and get some output. But I don't know how to do this, because there's always an "ok shell" wich I can't get out of it. > So I have some questions: > 1. What I really should do to repair that kernel panic and run FreeBSD (step by step, please!)? To bad you didn't copy the kernel panic output. I know it sucks to type it over but it shows lots of information about what is going wrong where. The shell you're in is the kernel debugger, which you can use to 'backtrace' the functions it has called to see where it goes wrong. (Think driver problem) Try typing 'trace' at that silly ok prompt to see a list of functions the kernel called (stack dump). If you never touched a c debugger before it might be rather difficult to use so I suggest you try out some 'default' kernels. The installation kernel clearly seemed to work ok since you've installed it using it, so this is the best place to start. Put your install cd back in the cdrom and reboot the computer. When booted, whenever you press alt-f4 (or f3 I never remeber things exactly ;) you'll be seeing a root shell. In that, you can mount your partitions on let's say /mnt. Now you can just copy the install kernel (/kernel) to your system (/mnt/kernel) and reboot. If you never replaced your default kernel then you might disable some drivers using the visual userconfig. Type boot -c at the boot prompt for that. You should be provided with an interface to select the hardware you actually have. Start with a minimum and work you way to the top so you can identify what is causing the trouble. > 2. Is there some good documentation to do this (What I mentioned above I read in a FAQ)? Booting process: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/boot.html man boot Custom kernel configuration: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html The Kernel Debugger: http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/x4862.html > 3. It could be a motherboard problem (so I'll never run FreBSD on my machine)? It might be caused due to some on board hardware, or some other device which conflicts, or bad memory or an overclocked machine. Without any additional information about the dump I can't say anything for sure. Most of the time it's either bad memory or a device probe which gets *very* confused. > > I hope you could help me. Thanks a lot! > > Best Regards, > Rafael Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ It's always darkest just before it gets pitch black. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6: 0: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 276ED37B404 for ; Mon, 29 Apr 2002 05:59:55 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 881DD49AB2; Mon, 29 Apr 2002 15:00:07 +0200 (CEST) Date: Mon, 29 Apr 2002 15:00:07 +0200 From: Axel Scheepers To: uwi mAn Cc: questions@freebsd.org Subject: Re: DHCPD Message-ID: <20020429150007.I61218@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from uwiman3k@hotmail.com on Sun, Apr 28, 2002 at 09:27:16PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Apr 28, 2002 at 09:27:16PM -0400, uwi mAn wrote: > From: "uwi mAn" > To: questions@freebsd.org > Subject: DHCPD > Date: Sun, 28 Apr 2002 21:27:16 -0400 > > Hi people, > > You know any decent DHCP server for FreeBSD? Hi, Try the one in /usr/ports/net/isc-dhcp3 It works fine for me :-) > > Thanks. > Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Non-Reciprocal Laws of Expectations: Negative expectations yield negative results. Positive expectations yield negative results. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:15:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (lennier.tninet.se [195.100.94.105]) by hub.freebsd.org (Postfix) with ESMTP id 48B1937B41A for ; Mon, 29 Apr 2002 06:15:48 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by lennier.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 97776.86120.1020.1s28090393lennier ; Mon, 29 Apr 2002 15:15:20 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Axel Scheepers , Lutz Horn Subject: Re: Xircom CreditCard 10/100 Configuration Date: Mon, 29 Apr 2002 15:15:18 +0200 X-Mailer: KMail [version 1.4] Cc: freebsd-questions@FreeBSD.ORG References: <20020427134911.GA2993@lutz-horn.de> <20020428103959.GA2782@lutz-horn.de> <20020429141739.G61218@mars.thuis> In-Reply-To: <20020429141739.G61218@mars.thuis> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204291515.18664.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 2:17 pm, Axel Scheepers wrote: > Hi all, > > Just to mention; there is a problem with the driver for some cards. > I have a CEM28 combo card, of which only the modem works, same problems > as you for the net part. > > I tried to make it work by hard coding some values in the driver, which > got it activated, but the MAC address was wrong and it didn't work righ= t. > For now I'm stuck with it. NetBSD people say the driver needs to be > rewritten but that's too much work for me right now (and I lack the > knowledge to do so ;) > > So, until somebody fixes the driver so it works for all the noncardbus > 16bit Xircom cards, I guess it's a dead end. Sorry. > > Gr, =20 I have a xircom cem56 10/100 ethernet/modem combo and the network bit wo= rks=20 fine. The problem is I can't get both working and the same time, oth if = I=20 ever have to go back to using modems I think I will kill myself....... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:21: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20807.mail.yahoo.com (web20807.mail.yahoo.com [216.136.226.196]) by hub.freebsd.org (Postfix) with SMTP id 2800A37B43D for ; Mon, 29 Apr 2002 06:20:58 -0700 (PDT) Message-ID: <20020429132053.64246.qmail@web20807.mail.yahoo.com> Received: from [63.34.228.31] by web20807.mail.yahoo.com via HTTP; Mon, 29 Apr 2002 23:20:53 EST Date: Mon, 29 Apr 2002 23:20:53 +1000 (EST) From: =?iso-8859-1?q?rui=20zhao?= Subject: question on the setting up of the PPP connection To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG dear sir, I try to connection two computers which have FreeBSD installed in through null-modem cable using PPP connection. In the freebsd handbook, I can not find the related information which talk about PPP connection on null modem cable. Can you tell me why? or It happens because i didn't find the right place in the handbook. I use the ppp.conf file in server and client side which is provided on the website ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/share/examples/ppp/ppp.conf.sample # Example to connect using a null-modem cable: the command I used is: ppp -background direct-server but I got an error message in the log file which is: can not find CD. I think CD means carrier detect. why it happens? thanks a lot for your help. Rui http://messenger.yahoo.com.au - Yahoo! Messenger - A great way to communicate long-distance for FREE! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:21:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web8102.in.yahoo.com (web8102.in.yahoo.com [203.199.70.29]) by hub.freebsd.org (Postfix) with SMTP id 7081237B428 for ; Mon, 29 Apr 2002 06:21:12 -0700 (PDT) Message-ID: <20020429132106.17484.qmail@web8102.in.yahoo.com> Received: from [202.71.141.92] by web8102.mail.in.yahoo.com via HTTP; Mon, 29 Apr 2002 14:21:06 BST Date: Mon, 29 Apr 2002 14:21:06 +0100 (BST) From: =?iso-8859-1?q?ritesh=20krishna?= Subject: VINUM(8) showing faulty plex To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi there, there are some problems i am facing trying the FreeBSD volume manager VINUM(8).i am using FreeBSD 4.5. I have 2 extra ESDI disks of 2.1GBs on which i am trying to make a logical volume.As the reference, i am looking at the official site of Vinum www.vinumvm.org.there are some examples given as how to setup vinum.i am trying to follow those examples as closely as possible.i am giving you the details of my configuration files as below. CONFIGURATION FILE 1 : ================================================== drive a device /dev/ad1s1e volume myvol plex org concat sd length 512m drive a =============END OF CONFIG. FILE 1 =============== CONFIGURATION FILE 2 : ================================================== drive b device /dev/ad3s1e volume mirror plex org concat sd length 512m drive a plex org concat sd length 512m drive b =============END OF CONFIG. FILE 2 =============== now the problem is that ,as soon as the devices are made by vinum, i am getting one PLEX as faulty.though i am able to make a newfs on the volume made,but the mirroring is not happening.i am giving the output of dumpconfig also,that might help looking at the problem more closely. =============DUMPCONFIG OUTPUT======================= Drive a: Device /dev/ad1s1e Created on serendipity.codito.co.in at Mon Apr 29 17:39:44 2002 Config last updated Mon Apr 29 17:39:52 2002 Size: 2163442176 bytes (2063 MB) volume myvol state up volume mirror state up plex name myvol.p0 state up org concat vol myvol plex name mirror.p0 state up org concat vol mirror plex name mirror.p1 state faulty org concat vol mirror sd name myvol.p0.s0 drive a plex myvol.p0 len 1048576s driveoffset 265s state up plexoffset 0s sd name mirror.p0.s0 drive a plex mirror.p0 len 1048576s driveoffset 1048841s state up plexoffset 0s sd name mirror.p1.s0 drive b plex mirror.p1 len 1048576s driveoffset 265s state empty plexoffset 0s Drive /dev/ad1s1e: 2063 MB (2163442176 bytes) Drive b: Device /dev/ad3s1e Created on serendipity.codito.co.in at Mon Apr 29 17:39:52 2002 Config last updated Mon Apr 29 17:39:52 2002 Size: 2162732544 bytes (2062 MB) volume myvol state up volume mirror state up plex name myvol.p0 state up org concat vol myvol plex name mirror.p0 state up org concat vol mirror ->plex name mirror.p1 state faulty org concat vol mirror /* ****here is the problem**** */ sd name myvol.p0.s0 drive a plex myvol.p0 len 1048576s driveoffset 265s state up plexoffset 0s sd name mirror.p0.s0 drive a plex mirror.p0 len 1048576s driveoffset 1048841s state up plexoffset 0s sd name mirror.p1.s0 drive b plex mirror.p1 len 1048576s driveoffset 265s state empty plexoffset 0s Drive /dev/ad3s1e: 2062 MB (2162732544 bytes) =================END OF DUMPCONFIG================= please inform me,if you have any solution for this. thanking you, ritesh. ________________________________________________________________________ For live cricket scores download Yahoo! Score Tracker at: http://in.sports.yahoo.com/cricket/tracker.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:25:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx0.gmx.net (mx0.gmx.net [213.165.64.100]) by hub.freebsd.org (Postfix) with SMTP id 9C4E837B41A for ; Mon, 29 Apr 2002 06:25:44 -0700 (PDT) Received: (qmail 1937 invoked by uid 0); 29 Apr 2002 13:25:38 -0000 Date: Mon, 29 Apr 2002 15:25:38 +0200 (MEST) From: fabio.f@gmx.de To: questions@freebsd.org MIME-Version: 1.0 Subject: Frustation with FreeBSD X-Priority: 3 (Normal) X-Authenticated-Sender: #0003237773@gmx.net X-Authenticated-IP: [195.179.163.45] Message-ID: <408.1020086738@www2.gmx.net> X-Mailer: WWW-Mail 1.5 (Global Message Exchange) X-Flags: 0001 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello everybody! I'm very disappointed about FreeBSD. I'm trying to get FreeBSD to run, but several things won't work. I spend so many hours in going through the handbook and trying things out, but it didn't helped. The Handbook ist really inadequate, if something went wrong. Maybe I should switch to suse Linux again. In SuSE, I clicked one button in SAX2 and everything was fine. Ok, iI will give FreeBSD the last change, but if no one can help me, I'll give up. Windows configured my sound card as ESS1869 PnP ISA 0x220-0x2bf,0x331-0x33b irq 5 drq 1,0. Dmesg | grep pcm gives the same back after reinstalling the kernel with device pcm and device sbc (options PNPBIOS in the kernel failed): pcm0: on sbc0. And Dmesg | grep sbc: sbc0: 0x220-0x2bf,0x331-0x33b irq 5 drq 1,0 on isa0. Command sh MAKEDEV snd0 &1 gave no pcm0 back. And there's no sound to hear. The gnome-mixer is adjusted, and while starting the game heretic, it has been closed because can't open dsp. I WILL HAVE SOUND. WHAT IS TO DO??? To mount a CD, I type "mount /cdrom", but how to mount an audio cd? And how can I mount CDROM graphically in GNOME? Allways look in /stand/sysinstall to know what application I had installed, is highly frustating. Any better solutions? To start an application for exaple:the game heretic starts with command "heretic". OK, I have tried out all names of most application, but this is time consuming and only one fifth starts with the name. Where can I find a file, where it is explicit explained to start for example heretic with "heretic". SuSE Linux offers the SuSE Help , where a complete package list is given and to each program is brief instruction with the starting command. I can't install many packages from the 4th CD, because the dependend package XFree86 3.3.6.10 is aborted to install. Why can't /stand/sysinstall not install the 3.3.6.10 package from the 4th cd. When I try to install it via ports, I mount /cdrom and type make install in the XFree86 - port, but the computer tries to access the internet and also abort it. What do I wrong? Greetings from Berlin, Germany Fabio -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:27: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from imo-m07.mx.aol.com (imo-m07.mx.aol.com [64.12.136.162]) by hub.freebsd.org (Postfix) with ESMTP id 819BF37B419 for ; Mon, 29 Apr 2002 06:26:58 -0700 (PDT) Received: from Gregmpoole@aol.com by imo-m07.mx.aol.com (mail_out_v32.5.) id n.85.1ad49a1d (17228) for ; Mon, 29 Apr 2002 09:26:52 -0400 (EDT) From: Gregmpoole@aol.com Message-ID: <85.1ad49a1d.29fea40d@aol.com> Date: Mon, 29 Apr 2002 09:26:37 EDT Subject: Question To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_85.1ad49a1d.29fea40d_boundary" X-Mailer: AOL 7.0 for Windows US sub 256 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_85.1ad49a1d.29fea40d_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello, Question, who is your lead developer in charge of freebsd development? Thanks, Greg Poole (704) 843-6928 --part1_85.1ad49a1d.29fea40d_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hello,

Question, who is your lead developer in charge of freebsd development?

Thanks,

Greg Poole
(704) 843-6928 --part1_85.1ad49a1d.29fea40d_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:28: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.accessus.net (email.accessus.net [209.145.128.5]) by hub.freebsd.org (Postfix) with ESMTP id D701537B41A for ; Mon, 29 Apr 2002 06:27:59 -0700 (PDT) Received: from [209.145.133.59] (account jkoenig@accessus.net HELO jwebmedia.com) by email.accessus.net (CommuniGate Pro SMTP 3.5.6) with ESMTP id 64195378; Mon, 29 Apr 2002 08:27:53 -0500 Message-ID: <3CCD4C2C.B42994EE@jwebmedia.com> Date: Mon, 29 Apr 2002 08:35:40 -0500 From: Joseph Koenig Reply-To: joe@jwebmedia.com Organization: jWeb New Media Design X-Mailer: Mozilla 4.77 (Macintosh; U; PPC) X-Accept-Language: en MIME-Version: 1.0 To: That Computer Guy Cc: questions@FreeBSD.ORG Subject: Re: Dell Poweredge 1650/Perc 3/Di Controllers References: <5.1.0.14.2.20020429023131.00ad1098@echonyc.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Be careful to check what RAID card Dell has installed, if applicable. Some of their new RAID cards are not compatible with FreeBSD at this point. To check if the card is compatible, go to: http://people.freebsd.org/~msmith/RAID/ Hope this helps, Joe That Computer Guy wrote: > > I've searched, read, googled ... all references seem to indicate that any > release after 4.3 should find the 'aac' devices from either the boot floppies > or the bootable CD ... > > I'm baffled - > > I've loaded FreeBSD v 5.0 onto a machine, built a kernel, and booted to > it too - no luck (I made certain option aac was enabled!) .. > > Is there some trick I don't know about? > Or is the Poweredge 1650 somehow built to disallow FreeBSD? > > Please ?!?!?!? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:36:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx3.airmail.net (mx3.airmail.net [209.196.77.100]) by hub.freebsd.org (Postfix) with ESMTP id ADD2337B421 for ; Mon, 29 Apr 2002 06:36:33 -0700 (PDT) Received: from mail3.iadfw.net ([209.196.123.3]) by mx3.airmail.net with smtp (Exim 3.33 #1) id 172BKT-000NVw-00; Mon, 29 Apr 2002 08:36:33 -0500 Received: from station1 from [209.144.229.104] by mail3.iadfw.net (/\##/\ Smail3.1.30.16 #30.61) with smtp for sender: id ; Mon, 29 Apr 2002 08:37:12 -0500 (CDT) Message-ID: <013101c1ef82$f0b1b6d0$0100a8c0@station1> From: "Joe Gwozdecki" To: "Jody Stonestreet" , References: <000801c1ef40$28214920$4b5591d8@ibm0251706282> Subject: Re: question?? Date: Mon, 29 Apr 2002 08:36:58 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_012E_01C1EF59.06CA17C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_012E_01C1EF59.06CA17C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable If your video card is not directly supported, XFree will not work. All = you can do then, is go and buy a supported card. =20 ------=_NextPart_000_012E_01C1EF59.06CA17C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
If your video card is not directly = supported, XFree=20 will not work.  All you can do then, is go and buy a supported = card. 
------=_NextPart_000_012E_01C1EF59.06CA17C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:42:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from imo-d09.mx.aol.com (imo-d09.mx.aol.com [205.188.157.41]) by hub.freebsd.org (Postfix) with ESMTP id 38B1037B419; Mon, 29 Apr 2002 06:42:08 -0700 (PDT) Received: from Gregmpoole@aol.com by imo-d09.mx.aol.com (mail_out_v32.5.) id n.11b.fdf9018 (17228); Mon, 29 Apr 2002 09:42:01 -0400 (EDT) From: Gregmpoole@aol.com Message-ID: <11b.fdf9018.29fea7a9@aol.com> Date: Mon, 29 Apr 2002 09:42:01 EDT Subject: Question2 To: portmgr@FreeBSD.org, freebsd-questions@FreeBSD.ORG Cc: gpoole@unitrends.com MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_11b.fdf9018.29fea7a9_boundary" X-Mailer: AOL 7.0 for Windows US sub 256 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_11b.fdf9018.29fea7a9_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit To Whom It May Concern, My name is Greg Poole and I am the Sales VP for a company called UniTrends, www.unitrends.com. We are a developer of backup, restore and crash recovery products. We have a crash recovery product we have recently ported to FreeBSD. We are wondering who is in charge of crash recovery for your organization? Also is there a way we can ship you the product and obtain some feedback? We are very interested in knowing whether or not you feel as though it will be well received, we have all of the right features, etc... Please call me if you have any questions (800) 648-2827 or email me at gpoole@unitrends.com. Thanks for your time and have a great week, Greg --part1_11b.fdf9018.29fea7a9_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit To Whom It May Concern,

My name is Greg Poole and I am the Sales VP for a company called UniTrends, www.unitrends.com.  We are a developer of backup, restore and crash recovery products.  We have a crash recovery product we have recently ported to FreeBSD. We are wondering who is in charge of crash recovery for your organization?  Also is there a way we can ship you the product and obtain some feedback?  We are very interested in knowing whether or not you feel as though it will be well received, we have all of the right features, etc...

Please call me if you have any questions (800) 648-2827 or email me at gpoole@unitrends.com.

Thanks for your time and have a great week,

Greg --part1_11b.fdf9018.29fea7a9_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:42:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc25.worldnet.att.net (mtiwmhc25.worldnet.att.net [204.127.131.50]) by hub.freebsd.org (Postfix) with ESMTP id CCF9E37B400 for ; Mon, 29 Apr 2002 06:42:27 -0700 (PDT) Received: from [192.168.20.22] ([12.76.82.55]) by mtiwmhc25.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020429134226.SELX2855.mtiwmhc25.worldnet.att.net@[192.168.20.22]> for ; Mon, 29 Apr 2002 13:42:26 +0000 User-Agent: Microsoft-Entourage/10.0.0.1309 Date: Mon, 29 Apr 2002 08:42:27 -0500 Subject: Re: Clock adjustment? From: SNFettig To: Message-ID: In-Reply-To: <1019994343.437.63.camel@chowder.dons.net.au> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 4/28/2002 6:45, "Daniel O'Connor" wrote: > What is the correct procedure for adjusting the PC clock? One of my PC's > loses about 120s per week which is being corrected by ntpdate. I would > like to tune the clock if possible instead. > > I've checked the handbook and FAQ but I couldn't find anything relevant > :( > > I believe you used to be able to run adjkerntz with an option which > would change the time added to the clock per tick but not longer. The way that I have set this up is by following the cheat-sheet from Dan O'Connor (http://www.mostgraveconcern.com/freebsd/ntp.html)*. Over time I have made tweaks from other howto areas on the net, but this is pretty much it: * Edit /etc/rc.conf: ### Network Time Services options: ### xntpd_enable="YES" xntpd_program="ntpd" xntpd_flags="-p /var/run/ntpd.pid" * Create /etc/ntp.conf: server time.nist.gov prefer server 127.127.1.0 fudge 127.127.1.0 stratum 10 driftfile /etc/ntp.drift * Reboot the computer, or start the daemon manually: # ntpd -p /var/run/ntpd.pid I would take a look at man ntpd to make sure you don't want to change any other settings. I find that this works great with all the servers I deal with - FreeBSD 4.3 and up. I would also take a look at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ntp.html This is basically what Dan suggests, but goes into more detail. -Steve * Dan makes the disclaimer that some of the information on his site may be out of date - but, free information is to be taken for what it is worth ;) . I thank him for putting things back up online again... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 6:43: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc24.worldnet.att.net (mtiwmhc24.worldnet.att.net [204.127.131.49]) by hub.freebsd.org (Postfix) with ESMTP id C854737B41E for ; Mon, 29 Apr 2002 06:42:59 -0700 (PDT) Received: from [192.168.20.22] ([12.76.82.55]) by mtiwmhc24.worldnet.att.net (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020429134257.SAJZ18857.mtiwmhc24.worldnet.att.net@[192.168.20.22]> for ; Mon, 29 Apr 2002 13:42:57 +0000 User-Agent: Microsoft-Entourage/10.0.0.1309 Date: Mon, 29 Apr 2002 08:42:58 -0500 Subject: Re: samba audio with video From: SNFettig To: freebsd-questions Message-ID: In-Reply-To: <3CCCDD7C.2050603@attbi.com> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 4/29/2002 0:43, "David Loszewski" wrote: > David Loszewski wrote: > >> My samba is working fine, access wise and all but when I have an avi >> file or mpg file (any movie file) that is supposed to have audio to it >> on the client's machine it will only display the video and will have >> no audio. Is there something I need to do to have the audio played as >> well? I'm currently running FreeBSD 4.5 >> >> Dave >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > no ideas? > > Dave Not really, but maybe I can ask a question that might get me further in helping you (for all that is worth ;) ). ->How did you install Samba - from the ports or binaries? ->Have you tried playing MP3's off of the share you have enabled for your other clients and does it work? (I am assuming you are going from a fbsd machine to some type of Windows client - is this correct?) -> Have you tried to copy the file to your local machine and play it from there? Do you have the same problems? -> what type of network equipment do you have between the computers? (i.e. 10/100 ethernet, wireless, etc?) What type of switches or hubs lie between the computers? I have Samba installed on two FreeBSD boxes and one Mac OS X laptop and have not had the problems you are describing. I have had choppy audio from MP3's, but that came from problems with a wifi connection. I have also found that some Windows media players (I can't remember which ones right now because I don't use Windows much anymore) need read and write access to the files - at least that is the change I made to the share that allowed them to be played (this was a looooong time ago, though, so I don't know whether it was me not understanding what I was doing - which might have been the case - or if it was something else that was quirky). Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7: 5:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx3.airmail.net (mx3.airmail.net [209.196.77.100]) by hub.freebsd.org (Postfix) with ESMTP id C12B037B417 for ; Mon, 29 Apr 2002 07:05:11 -0700 (PDT) Received: from mail3.iadfw.net ([209.196.123.3]) by mx3.airmail.net with smtp (Exim 3.33 #1) id 172Bm9-000Pke-00; Mon, 29 Apr 2002 09:05:09 -0500 Received: from station1 from [209.144.229.104] by mail3.iadfw.net (/\##/\ Smail3.1.30.16 #30.61) with smtp for sender: id ; Mon, 29 Apr 2002 09:05:48 -0500 (CDT) Message-ID: <017701c1ef86$ef991e10$0100a8c0@station1> From: "Joe Gwozdecki" To: "Eric Christian Carlsen" , References: Subject: Re: freeze on install Date: Mon, 29 Apr 2002 09:05:35 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I would check to see if your video and sound cards are directly supported. If not, go get ones that are. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7: 5:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.nc.rr.com (fe4.southeast.rr.com [24.93.67.51]) by hub.freebsd.org (Postfix) with ESMTP id 4815437B41F for ; Mon, 29 Apr 2002 07:05:44 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail4.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Mon, 29 Apr 2002 10:05:43 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id 50D26BB29; Mon, 29 Apr 2002 10:05:42 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: fabio.f@gmx.de, questions@FreeBSD.ORG Subject: Re: Frustation with FreeBSD Date: Mon, 29 Apr 2002 10:05:42 -0400 X-Mailer: KMail [version 1.3] References: <408.1020086738@www2.gmx.net> In-Reply-To: <408.1020086738@www2.gmx.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020429140542.50D26BB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 09:25 am, fabio.f@gmx.de wrote: | Hello everybody! | I'm very disappointed about FreeBSD. I'm trying to get FreeBSD to run, but Sorry to hear that. | several things won't work. I spend so many hours in going through the | handbook and trying things out, but it didn't helped. The Handbook ist | really inadequate, if something went wrong. Maybe I should switch to suse | Linux again. In SuSE, I clicked one button in SAX2 and everything was fine. Well, I guess whether you want to switch back to Linux depends on why you switched to FreeBSD in the first place. Linux is more of a "consumer" operating system at this point; FreeBSD is more of a traditional Unix-like experience. It was the user-friendliness of Linux that soured me on it (meaning, there was too much Gui glop that got in the way of me finding the scripts and such where the action really was, plus it became just impossible to rebuild a kernel anymore), but perhaps you prefer that, in which case Linux might be a better choice *unless* there's something about FreeBSD you prefer. (Some people will fanatically try to get everybody use FreeBSD; I'm much more of the "if you prefer chocolate, order chocolate" persuasion.) | Ok, iI will give FreeBSD the last change, but if no one can help me, I'll | give up. | Windows configured my sound card as ESS1869 PnP ISA 0x220-0x2bf,0x331-0x33b Ok, I am *not* the soundcard expert here, and somebody else can be more helpful, I'm sure, but one thing strikes me here: FreeBSD doesn't usually get on so well with Plug-n-play. You might try disabling that in the bios. | irq 5 drq 1,0. Dmesg | grep pcm gives the same back after reinstalling the | kernel with device pcm and device sbc (options PNPBIOS in the kernel | failed): pcm0: on sbc0. And Dmesg | grep sbc: sbc0: | 0x220-0x2bf,0x331-0x33b irq 5 drq 1,0 on isa0. Command sh MAKEDEV snd0 &1 | gave no pcm0 back. And there's no sound to hear. The gnome-mixer is | adjusted, and while starting the game heretic, it has been closed because | can't open dsp. I WILL HAVE SOUND. WHAT IS TO DO??? Also, it could need to have a sound driver loaded, though I wouldn't know which one. However, as a total *guess*, try kldload ess and see if that makes any difference. If it does, it can be autoloaded from your /boot/loader.conf permanently with a "snd_ess_load="YES". | To mount a CD, I type "mount /cdrom", but how to mount an audio cd? And how Audio CD's aren't mounted. Just insert the audio CD and start up xmcd or whatever application you prefer to play the CD; it should just work. (Once you get sound enabled, of course.) | can I mount CDROM graphically in GNOME? No clue. That would seem to be more of a GNOME question than a FreeBSD question. | Allways look in /stand/sysinstall to know what application I had installed, | is highly frustating. Any better solutions? To start an application for pkg_info -aI | exaple:the game heretic starts with command "heretic". OK, I have tried out | all names of most application, but this is time consuming and only one | fifth starts with the name. Where can I find a file, where it is explicit | explained to start for example heretic with "heretic". You don't know how to use any of the applications you have installed? How did you start them before (under Linux)? pkg_info can tell you, among other things, what files were installed for a given pacakge. Useful tip: pkg_info zip tells me zip (as in nothing) since that's not the full package name, but pkg_info 'zip*' tells me about it. man pkg_info for more information. Or, on the other hand, I can just lanuch my appliations from the KDE start menu since I run KDE, and it automatically picks up my installed applications (or perhaps I run some scan-for-applications thingee from the KDE control panel long ago that I don't quite recall). I'd expect that Gnome would do the same thing, but if not, you could consider dumping Gnome in favor of KDE if you want a more "user-friendly", Windows-like environment for launching programs. | SuSE Linux offers | the SuSE Help , where a complete package list is given and to each program | is brief instruction with the starting command. Well, FreeBSD desn't have that. Kinda a cool idea, though; maybe I was running the wrong Linux distribution. But I like FreeBSD better anyway, but then I was using BSD in 1981, so it's more like home to me. | I can't install many packages from the 4th CD, because the dependend | package XFree86 3.3.6.10 is aborted to install. Why can't /stand/sysinstall | not install the 3.3.6.10 package from the 4th cd. When I try to install it | via ports, I mount /cdrom and type make install in the XFree86 - port, but | the computer tries to access the internet and also abort it. What do I | wrong? ports always install off the internet; that's just what they do. You need to install the *package* off the cd, with pkg_add. | Greetings from Berlin, Germany | Fabio -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7:14:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sdns.kv.ukrtel.net (sdns.kv.ukrtel.net [195.5.27.246]) by hub.freebsd.org (Postfix) with ESMTP id 4855537B404; Mon, 29 Apr 2002 07:14:43 -0700 (PDT) Received: from vega.vega.com (195.5.51.243 [195.5.51.243]) by sdns.kv.ukrtel.net with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) id J67JY2JS; Mon, 29 Apr 2002 17:16:22 +0300 Received: from FreeBSD.org (big_brother.vega.com [192.168.1.1]) by vega.vega.com (8.11.6/8.11.3) with ESMTP id g3TEEq130967; Mon, 29 Apr 2002 17:14:52 +0300 (EEST) (envelope-from sobomax@FreeBSD.org) Message-ID: <3CCD55D2.13D8F40@FreeBSD.org> Date: Mon, 29 Apr 2002 17:16:50 +0300 From: Maxim Sobolev Organization: Vega International Capital X-Mailer: Mozilla 4.79 [en] (Windows NT 5.0; U) X-Accept-Language: en,uk,ru MIME-Version: 1.0 To: Gregmpoole@aol.com Cc: gpoole@unitrends.com, ports@FreeBSD.org Subject: Re: Question2 References: <11b.fdf9018.29fea7a9@aol.com> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Gregmpoole@aol.com wrote: > > To Whom It May Concern, > > My name is Greg Poole and I am the Sales VP for a company called > UniTrends, www.unitrends.com. We are a developer of backup, restore > and crash recovery products. We have a crash recovery product we > have recently ported to FreeBSD. We are wondering who is in charge > of crash recovery for your organization? Also is there a way we can > ship you the product and obtain some feedback? We are very > interested in knowing whether or not you feel as though it will be > well received, we have all of the right features, etc... > > Please call me if you have any questions (800) 648-2827 or email me > at gpoole@unitrends.com. > > Thanks for your time and have a great week, In order to distribute your product with FreeBSD you have to create a so-called port for it and get this port added into the FreeBSD CVS repository. Check FreeBSD Porter's Handbook on information on how to do it (http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/index.html). Don't hesitate to contact me if you have any questions. Thank you for your interest. -Maxim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7:16: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sumter.awod.com (sumter.awod.com [208.140.99.1]) by hub.freebsd.org (Postfix) with ESMTP id 2F8CC37B416 for ; Mon, 29 Apr 2002 07:15:44 -0700 (PDT) Received: from teddy.fas.com (pcp01010372pcs.mplsnt01.sc.comcast.net [68.58.176.67]) by sumter.awod.com (8.8.7/8.12.2) with ESMTP id KAA90132 for ; Mon, 29 Apr 2002 10:15:41 -0400 (EDT) (envelope-from stanb@awod.com) X-Authentication-Warning: sumter.awod.com: User sandib [pcp01010372pcs.mplsnt01.sc.comcast.net] popped 19 seconds ago Received: from stan by teddy.fas.com with local (Exim 3.35 #1 (Debian)) id 172Bxc-0001HI-00 for ; Mon, 29 Apr 2002 10:17:00 -0400 Date: Mon, 29 Apr 2002 10:16:59 -0400 From: stan To: Free BSD Questions list Subject: Galeon port build problems Message-ID: <20020429141659.GA4898@teddy.fas.com> Mail-Followup-To: Free BSD Questions list Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable User-Agent: Mutt/1.3.28i X-Editor: gVim X-Operating-System: Debian GNU/Linux X-Kernel-Version: 2.4.17 X-Uptime: 10:15:40 up 37 days, 14:00, 1 user, load average: 0.51, 0.52, 0.61 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm having problems geting galeon built after this weekends cvsup/portupgrade.=20 Her's the tail end of the failure: Script started on Mon Apr 29 10:12:58 2002 brown# make install=0D =3D=3D=3D> Building for galeon-1.2.1_1 make all-recursive Making all in intl Making all in po Making all in src Making all in mozilla c++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -I/usr/X11R6/include/mozil= la -I/usr/X11R6/include/mozilla/nspr -I/usr/X11R6/include/mozilla/appcomps= -I/usr/X11R6/include/mozilla/content -I/usr/X11R6/include/mozilla/cookie= -I/usr/X11R6/include/mozilla/docshell -I/usr/X11R6/include/mozilla/dom = -I/usr/X11R6/include/mozilla/exthandler -I/usr/X11R6/include/mozilla/find = -I/usr/X11R6/include/mozilla/gfx -I/usr/X11R6/include/mozilla/gtkembedmoz= -I/usr/X11R6/include/mozilla/helperAppDlg -I/usr/X11R6/include/mozilla/j= ava -I/usr/X11R6/include/mozilla/jsconsole -I/usr/X11R6/include/mozilla/l= ayout -I/usr/X11R6/include/mozilla/mimetype -I/usr/X11R6/include/mozilla/= mozxfer -I/usr/X11R6/include/mozilla/necko -I/usr/X11R6/include/mozilla/n= ecko2 -I/usr/X11R6/include/mozilla/nkcache -I/usr/X11R6/include/mozilla/o= ji -I/usr/X11R6/include/mozilla/pref -I/usr/X11R6/include/mozilla/progres= sDlg -I/usr/X11R6/include/mozilla/string -I/usr/X11R6/include/mozilla/shi= story -I/usr/X11R6/include/mozilla/uconv -I/usr/X11R6/include/mozilla/uri= loader -I/usr/X11R6/include/mozilla/wallet -I/usr/X11R6/include/mozilla/w= ebbrowserpersist -I/usr/X11R6/include/mozilla/webbrwsr -I/usr/X11R6/inclu= de/mozilla/webshell -I/usr/X11R6/include/mozilla/widget -I/usr/X11R6/incl= ude/mozilla/windowwatcher -I/usr/X11R6/include/mozilla/xpcom -I/usr/X11R6= /include/gconf/1 -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/lo= cal/include/orbit-1.0 -I/usr/local/include -I/usr/X11R6/include/gtk12 -I/u= sr/X11R6/include/gdk-pixbuf-1.0 -I/usr/X11R6/include/gtk12 -I/usr/local/inc= lude/glib12 -I/usr/local/include -I/usr/X11R6/include -I/usr/X11R6/include/= gnome-vfs-1.0 -I/usr/X11R6/lib/gnome-vfs-1.0/include -I/usr/local/include/g= nome-xml -I/usr/local/include/orbit-1.0 -I/usr/X11R6/include/gconf/1 -D_THR= EAD_SAFE -I/usr/X11R6/include/libglade-1.0 -I/usr/X11R6/include/gnome-1.0 -= DNEED_GNOMESUPPORT_H -I/usr/X11R6/lib/gnome-libs/include -I/usr/local/inclu= de/freetype2 -DLIB_DIR=3D\"/usr/X11R6/lib/galeon\" -DSHARE_DIR=3D\"/usr/X= 11R6/share/gnome/galeon\" -I/usr/local/include -I/usr/X11R6/include -D_REE= NTRANT -D_THREAD_SAFE -fno-rtti -O -pipe -Wall -Wmissing-declarations -W= missing-prototypes -Wsign-compare -Werror -c FilePicker.cpp In file included from /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h= :29, from FilePicker.cpp:51: /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:7: gdk_imlib.h: No s= uch file or directory In file included from /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h= :29, from FilePicker.cpp:51: /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:46: syntax error bef= ore `*' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:51: syntax error bef= ore `*' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:56: `GdkImlibImage' = was not declared in this scope /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:56: `im' was not dec= lared in this scope /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:57: `GdkImlibImage' = was not declared in this scope /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:57: `im' was not dec= lared in this scope /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:58: syntax error bef= ore `,' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:58: initializer list= being treated as compound expression /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:68: syntax error bef= ore `*' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:74: syntax error bef= ore `*' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:79: syntax error bef= ore `*' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:81: syntax error bef= ore `*' In file included from FilePicker.cpp:51: /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:228: syntax error bef= ore `;' /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:238: syntax error bef= ore `;' *** Error code 1 Stop in /usr/ports/www/galeon/work/galeon-1.2.1/src/mozilla. *** Error code 1 Stop in /usr/ports/www/galeon/work/galeon-1.2.1/src. *** Error code 1 Stop in /usr/ports/www/galeon/work/galeon-1.2.1. *** Error code 1 Stop in /usr/ports/www/galeon/work/galeon-1.2.1. *** Error code 1 Stop in /usr/ports/www/galeon. brown# ^D=08=08exit Script done on Mon Apr 29 10:13:26 2002 What can I do to fix this? --=20 "They that would give up essential liberty for temporary safety deserve neither liberty nor safety." -- Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7:17:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mhub-w2.tc.umn.edu (mhub-w2.tc.umn.edu [160.94.160.45]) by hub.freebsd.org (Postfix) with ESMTP id E250837B41E for ; Mon, 29 Apr 2002 07:17:30 -0700 (PDT) Received: from x74-47.forestry.umn.edu by mhub-w2.tc.umn.edu with ESMTP for freebsd-questions@freebsd.org; Mon, 29 Apr 2002 09:17:25 -0500 Subject: gnome terminal size From: "Kirk R. Wythers" To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 10:06:55 -0400 Message-Id: <1020089215.71337.9.camel@lorax.forestry.umn.edu> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just compiled the new gnome build (I wanted to take a look at it after using kde for a long time). My question is this: How do you switch to a smaller terminal? The default terminal is rather large. There is an option in kde to chose both terminal and font size. Does something similar exist in gnome? Regards, Kirk -- Kirk R. Wythers email: kwythers@umn.edu University of Minnesota tel: 612.625.2261 Department of Forest Resources fax: 612.625.5212 Saint Paul, MN 55108 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 7:34:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from stuff.webintl.com (stuff.webintl.com [209.248.144.10]) by hub.freebsd.org (Postfix) with ESMTP id 98B1037B405 for ; Mon, 29 Apr 2002 07:34:17 -0700 (PDT) Received: from [192.168.123.20] (adsl-66-136-237-161.dsl.ltrkar.swbell.net [66.136.237.161]) by stuff.webintl.com (8.9.3/8.9.3) with ESMTP id JAA18733 for ; Mon, 29 Apr 2002 09:34:16 -0500 Mime-Version: 1.0 X-Sender: freebsd@mail.webintl.com Message-Id: Date: Mon, 29 Apr 2002 09:34:13 -0500 To: freebsd-questions@freebsd.org From: Albert Everett Subject: postfix within jail under FreeBSD 4.5 Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I while back someone wrote in that postfix doesn't work (without the right patch) inside jails under FreeBSD 4.5. Has there been any change in status on this issue? Albert -- ----------------------------------------------------------------------- Albert Everett - Web International, Inc. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 8: 3: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.simrad.no (mail.simrad.no [193.69.73.2]) by hub.freebsd.org (Postfix) with ESMTP id 1E0FA37B417 for ; Mon, 29 Apr 2002 08:02:42 -0700 (PDT) To: freebsd-questions@freebsd.org Subject: sane & scanner problem MIME-Version: 1.0 X-Mailer: Lotus Notes Build M11_11052001 Beta 4 November 05, 2001 Message-ID: From: chip.wiegand@simrad.com Date: Mon, 29 Apr 2002 08:03:10 -0700 X-MIMETrack: Serialize by Router on S_INET01/S_EXT(Release 5.0.6a |January 17, 2001) at 29.04.2002 17:03:16, Serialize complete at 29.04.2002 17:03:16 Content-Type: text/plain; charset="US-ASCII" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have an HP scanner that is supported by Sane, connected by USB to my FBSD-4.5R box. I installed sane-frontends and sane-backends and xsane. When I run gimp - menu item Extns/Acquire Image/Settings, I get a message on the screen 'xcanimage: no scanners were identified. If you were expecting something differant check to make sure the scanner is plugged in, turned on and detected by sane-find-scanner (if appropriate)...' I ran sane-find-scanner as root and it finds, but doesn't identify, the scanner on uscanner0. How do I get it to identify my scanner so it can be used? -- Chip Wiegand Computer Services Simrad, Inc www.simradusa.com chip.wiegand@simrad.com "There is no reason anyone would want a computer in their home." --Ken Olson, president, chairman and founder of Digital Equipment Corporation, 1977 (They why do I have 9? Somebody help me!) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 8:26:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dc-mxdb06.cluster1.charter.net (209-225-8-81.hsacorp.net [209.225.8.81]) by hub.freebsd.org (Postfix) with ESMTP id EA94D37B41A for ; Mon, 29 Apr 2002 08:26:16 -0700 (PDT) Received: from [24.216.189.213] (account ) by dc-mxdb06.cluster1.charter.net (CommuniGate Pro WebUser 3.5.9) with HTTP id 2510779 for ; Mon, 29 Apr 2002 11:32:01 -0400 From: Xenwa@FreeBSD.ORG Subject: subscribe To: FreeBSD-Questions@FreeBSD.ORG X-Mailer: CommuniGate Pro Web Mailer v.3.5.9 Date: Mon, 29 Apr 2002 11:32:01 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format="flowed" Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe FreeBSD-Questions xenwa@charter.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 8:52: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from exchmx2.lsuhsc.edu (exchmx2.lsuhsc.edu [155.58.212.90]) by hub.freebsd.org (Postfix) with ESMTP id 8F37537B400 for ; Mon, 29 Apr 2002 08:51:47 -0700 (PDT) Received: by exchmx2.lsuhsc.edu with Internet Mail Service (5.5.2653.19) id <2H7J59G3>; Mon, 29 Apr 2002 10:50:35 -0500 Message-ID: From: "Mire, John" To: 'Axel Scheepers' , Jimmy Cc: freebsd-questions@freebsd.org Subject: RE: ipfilter+ipfw Date: Mon, 29 Apr 2002 10:49:16 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I remember Crist J. Clark had outlined some patches on his website and the pathway to get this to work on freebsd-net I think, try searching the archives.... -- John Mire: jmire@lsuhsc.edu Network Administration 318-675-5434 LSU Health Sciences Center - Shreveport -----Original Message----- From: Axel Scheepers [mailto:axel@axel.truedestiny.net] Sent: Monday, April 29, 2002 7:04 AM To: Jimmy Cc: freebsd-questions@freebsd.org Subject: Re: ipfilter+ipfw On Fri, Apr 26, 2002 at 02:34:06PM +0800, Jimmy wrote: > Hi, > > I've configure my FreeBSD-4.5-STABLE firewall host, and I installed 4 NIC cards on it and I'm using ipfilter to NAT and packet filter & ipfw to bridge and as a traffic shaper. Here are the following list of my NIC card: > > fxp0=localnet1(192.168.100.0/24)nat > xl0=external interface connected to dsl modem > xl1=localnet2(192.168.200.0/24)nat > xl2=filter bridge to xl0 > > The outside world can see my host connected to the bridge NIC and vice versa, except my localnet1 and localnet2. Do I missed something in my configuration? How can I connect my localnet1 & 2 to talk to host connected to xl2 which is being bridge. Hi, It is general a bad idea to mix ipf and ipfilter, ipfilter and ipnat combo works directly on the kernel tables, while ipf runs in userspace and is thus somewhat slower. The 192.168.x.x aren't routed on the internet, and must be remangled to the modem's ip. (NAT) This seems to go wrong. At my place I have ipfilter/ipnat where ipnat does the following: map 192.168.0.0/16 -> 0/32 portmap auto map 192.168.0.0/16 -> 0/32 proxy ftp rdr 0.0.0.0/0 port 80 -> 192.168.0.5 port 80 which directs all traffic to another host in my local lan. You can use tcpdump to see what packets are being forwarded (did you sysctl -w net.inet.ip.forwarding=1?) A couple of extra debug generating rules isn't bad either, to see what gets denied and what goes through. Probably best solution is to stick with one of the two firewalls, instead of using both at the same time. > > TIA, > > Jimmy > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ A fanatic is one who can't change his mind and won't change the subject. -- Winston Churchill ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:26:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id E5CBD37B416 for ; Mon, 29 Apr 2002 09:26:21 -0700 (PDT) Received: from jud [12.33.164.6] by myrealbox.com with NIMS ModWeb Module; Mon, 29 Apr 2002 12:26:10 -0400 Subject: Re: WindowsXP Pro and FreeBSD From: Jud To: nl3481@wi.rr.com Cc: freebsd-questions@FreeBSD.ORG, eburke@intelos.com Date: Mon, 29 Apr 2002 12:26:10 -0400 X-Mailer: NIMS ModWeb Module X-Sender: jud MIME-Version: 1.0 Message-ID: <1020097570.9e379ffcjud@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----Original Message----- From: "Nick Lozinsky" To: , "Eric B." Date: Sun, 29 Apr 2001 17:04:05 -0500 Subject: Re: WindowsXP Pro and FreeBSD [snip] Multibooting WinNT 5 or 2000 and FreeBSD will work. To my knowledge, FreeBS= D can be booted with almost any other OS. Although I and many other people have problems with the FreeBSD booteasy bootloader, after installing FreeBS= D onto a disk with win2000, the menu to boot loader will look sonething similar to this: F1: ??? F2: FreeBSD I do not know how to get rid of the ???, and have not been provided with an answer.=20 [snip] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Hmm, I thought an answer had been provided. At the risk of repeating somet= hing that's recently appeared here: 1. You can't get rid of the ???. BootEasy doesn't provide a way to configu= re the menu entries. (This is in the FAQ at the FreeBSD web site.) 2. As you mentioned in a bit I snipped, the NT/W2K/XP bootloader can be con= figured to boot Windows and FreeBSD in a dual boot system. Instructions = are in the FAQ at the FreeBSD web site. This has the advantage of allowi= ng you to change the menu entries to say what you like (no ???). 3. Grub, which is a very good, very configurable bootloader (no ???, lots o= f other user-changeable stuff), is available as a FreeBSD port. It's loc= ated in /usr/ports/sysutils/grub. Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:29:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from adrastea.arcticbears.com (arcticbears.com [64.180.110.248]) by hub.freebsd.org (Postfix) with SMTP id DD1FA37B419 for ; Mon, 29 Apr 2002 09:29:46 -0700 (PDT) Received: (qmail 25510 invoked by uid 502); 29 Apr 2002 16:29:46 -0000 Message-ID: <20020429162946.25509.qmail@adrastea.arcticbears.com> From: "Joe Sotham" To: "FreeBSD Mailing List" Subject: locked myself out of my FreeBSD 4.5 server Date: Mon, 29 Apr 2002 09:29:46 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ooops, I forgot to install .../ports/.../bash2 before changing the login shell for root and my user id. . STUPID,STUPID, STUPID! BAD DOG! Now when I try to log in at the console I get ...no valid shell message and booted off the system I've tried booting to single user mode and fixing the passwd file...I get / mounted ro. I don't have disk #2. I am not sure what the next step is. Joe ----------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:32:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id C30EE37B41B for ; Mon, 29 Apr 2002 09:32:38 -0700 (PDT) Received: from dan.emsphone.com (smmsp@localhost [127.0.0.1]) by dan.emsphone.com (8.12.2/8.12.3) with ESMTP id g3TGWZ2Z002889; Mon, 29 Apr 2002 11:32:37 -0500 (CDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.2/Submit) id g3TGWYOs002850; Mon, 29 Apr 2002 11:32:34 -0500 (CDT) Date: Mon, 29 Apr 2002 11:32:34 -0500 From: Dan Nelson To: "Daniel O'Connor" Cc: SNFettig , freebsd-questions@FreeBSD.ORG Subject: Re: Clock adjustment? Message-ID: <20020429163234.GP77779@dan.emsphone.com> References: <1020084497.10959.1.camel@chowder.dons.net.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1020084497.10959.1.camel@chowder.dons.net.au> User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Apr 29), Daniel O'Connor said: > On Mon, 2002-04-29 at 21:55, SNFettig wrote: > > The way that I have set this up is by following the cheat-sheet > > from Dan O'Connor > > (http://www.mostgraveconcern.com/freebsd/ntp.html)*. Over time I > > have made tweaks from other howto areas on the net, but this is > > pretty much it: > > Oops.. I forgot to mention.. > > I can't really use ntp as the system isn't dialed up very frequently > (ie about an hour a day maximum) and I currently use ntpdate to > adjust the date at each dialup. > > The cumulative difference is around 120 seconds. I was recently > informed that you can adjust the machdep.i8254_freq sysctl which > should do what I want.. If you add the 'iburst' flag to your server lines in ntp.conf, ntpd will send 8 packets the first time it sees a server is reachable, and should adjust the system's clock within 30 secs. Hopefully if you are on for an hour ntpd will be able to calculate your system's clock drift on its own (and store it in /etc/ntp.drift). 120 secs/day is pretty bad drift, though. Ntpd might resort to stepping the clock like ntpdate, but since it is also going to be slewing it while you're offline, the step shouldn't be as large as if you were just using ntpdate. http://www.eecis.udel.edu/~ntp/ntpfaq/NTP-s-config.htm#AEN2453 http://www.eecis.udel.edu/~ntp/ntp_spool/html/assoc.htm -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:41:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 81D2637B400 for ; Mon, 29 Apr 2002 09:41:52 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 172EDi-0006sf-00 for ; Mon, 29 Apr 2002 17:41:46 +0100 Date: Mon, 29 Apr 2002 17:41:46 +0100 From: Daniel Bye To: FreeBSD Mailing List Subject: Re: locked myself out of my FreeBSD 4.5 server Message-ID: <20020429164146.GA26051@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: FreeBSD Mailing List References: <20020429162946.25509.qmail@adrastea.arcticbears.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020429162946.25509.qmail@adrastea.arcticbears.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 09:29:46AM -0700, Joe Sotham wrote: > Ooops, I forgot to install .../ports/.../bash2 before changing the login > shell for root and my user id. . STUPID,STUPID, STUPID! BAD DOG! > Oops indeed... ;-) > Now when I try to log in at the console I get ...no valid shell message and > booted off the system > > I've tried booting to single user mode and fixing the passwd file...I get / > mounted ro. I don't have disk #2. I am not sure what the next step is. Boot single user as you did previously, then do this: mount -u -w / This remounts / read/write. You can then go and repair /etc/passwd. There was some other unfortunate soul on here earlier who did very similar. The lesson for today would seem to be "leave root's shell alone!" And don't do it again! ;-) Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:47:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20502.mail.yahoo.com (web20502.mail.yahoo.com [216.136.226.137]) by hub.freebsd.org (Postfix) with SMTP id E608D37B41F for ; Mon, 29 Apr 2002 09:47:35 -0700 (PDT) Message-ID: <20020429164735.49325.qmail@web20502.mail.yahoo.com> Received: from [136.185.151.143] by web20502.mail.yahoo.com via HTTP; Mon, 29 Apr 2002 09:47:35 PDT Date: Mon, 29 Apr 2002 09:47:35 -0700 (PDT) From: Bryan Curl Subject: Boot Manager Conversion To: freebsd-questions MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1595542194-1020098855=:48609" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0-1595542194-1020098855=:48609 Content-Type: text/plain; charset=us-ascii I have a doal boot system now, Win98/Linux mandrake 7.02. Recently experimented with FreeBSD and really like it. But I had installed the MBR onto the hard drive, which means I have to swap IDE cables to from the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux in favor of BSD but havent ported all my homebrew apps yet. So, I need to tripple boot if possible. That means I need to get the MBR off the BSD drive onto a floppy and use a boot loader that will work with Win98, Linux, and FreeBSD. How do I convert my FreeBSD so it boots from a floppy using a boot loader instead of booting from the MBS on the hard drive? Mucho Gratis Bryan --bc3910@yahoo.com --------------------------------- Do You Yahoo!? Yahoo! Health - your guide to health and wellness --0-1595542194-1020098855=:48609 Content-Type: text/html; charset=us-ascii

I have a doal boot system now, Win98/Linux mandrake 7.02.

Recently experimented with FreeBSD and really like it. But I had installed the MBR onto the hard drive, which means I have to swap IDE cables to from the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux in favor of BSD but havent ported all my homebrew apps yet. So, I need to tripple boot if possible. That means I need to get the MBR off the BSD drive onto a floppy and use a boot loader that will work with Win98, Linux, and FreeBSD.

How do I convert my FreeBSD so it boots from a floppy using a boot loader instead of booting from the MBS on the hard drive? 

 



Mucho Gratis
Bryan
--bc3910@yahoo.com


Do You Yahoo!?
Yahoo! Health - your guide to health and wellness --0-1595542194-1020098855=:48609-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:52:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 45A8C37B400 for ; Mon, 29 Apr 2002 09:51:40 -0700 (PDT) Received: from k6-2-300.tisys.org (ppp-161.wobline.de [212.68.69.169]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/sh-2002041503) with ESMTP id g3TGpWK29592 for ; Mon, 29 Apr 2002 18:51:32 +0200 Received: from tisys.org (palomino-1533.tisys.org [192.168.0.3]) by k6-2-300.tisys.org (8.12.3/8.12.3) with ESMTP id g3TGqho2006582 for ; Mon, 29 Apr 2002 18:52:43 +0200 (CEST) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.12.3/8.12.3/Submit) id g3TGpjga006281 for freebsd-questions@freebsd.org; Mon, 29 Apr 2002 18:51:45 +0200 (CEST) Date: Mon, 29 Apr 2002 18:51:10 +0200 From: Nils Holland To: freebsd-questions@freebsd.org Subject: Sendmail and POP3-before-SMTP Message-ID: <20020429185110.A6231@daemon.tisys.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Operating-System: FreeBSD palomino-1533.tisys.org 4.5-STABLE FreeBSD 4.5-STABLE X-Machine-Uptime: 6:33PM up 8:31, 1 user, load averages: 0.00, 0.00, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I have a question which is not strictly FreeBSD-related, but probably someone will be able to help me anyway. Here's the situation: On my local network, all machines send their mail to one "gateway" server. That server, connected to the Internet via PPP, establishes a connection and forwards the mail to my ISP's mail server (which I specified as "Smart Host" in my local server's sendmail.cf file). Now, this works very well, but when my ISP recently had problems with their mail servers, I had to fall back to a secondary server, provided by my webhosting company. This secondary server requires "POP3-before-SMTP" authentication, so mail has to be fetched from it before mail can be sent. Since POP-before-SMTP is not really a "standard" authentication mechanism, the sendmail on my local server will not be abld to correctly handle the situation when connecting to my webhost's server. The question now is if anybody has an idea if I could do something against it. My first attempt was to automatically run fetchmail everytime mail was sent. This didn't really work, however, as fetchmail and sendmail would both use the PPP connection as soon as it became available, and fetchmail would have to be "faster" than sendmail for the authentication to work correctly. This, however, was not really controllable. So, does anyone have an idea if I can do something which makes sure that a POP3 autnentication (for example by running fetchmail) takes place every time before sendmail relays a message? Greetings Nils -- Nils Holland Ti Systems - http://www.tisys.org Addicted to computing since 1987 High on FreeBSD since 1996 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 9:54:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id D800C37B41D for ; Mon, 29 Apr 2002 09:54:38 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TGsEU24321; Mon, 29 Apr 2002 12:54:15 -0400 Message-ID: <3CCD7BEE.8030009@potentialtech.com> Date: Mon, 29 Apr 2002 12:59:26 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Jud Cc: nl3481@wi.rr.com, freebsd-questions@FreeBSD.ORG Subject: Re: WindowsXP Pro and FreeBSD References: <1020097570.9e379ffcjud@myrealbox.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Jud wrote: > -----Original Message----- > From: "Nick Lozinsky" > > F1: ??? > F2: FreeBSD > > I do not know how to get rid of the ???, and have not been provided with an > answer. > [snip] > > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > > Hmm, I thought an answer had been provided. At the risk of repeating something that's recently appeared here: > > 1. You can't get rid of the ???. BootEasy doesn't provide a way to configure the menu entries. (This is in the FAQ at the FreeBSD web site.) Not true. You have the source code, you can make it say anything you want. In fact, I saw an article somewhere a while ago about how to do this. If you're not a programmer, however, you probably don't want to get in this deep. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10: 0:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from slate.dublin.wbtsystems.com (slate.dublin.wbtsystems.com [193.120.231.12]) by hub.freebsd.org (Postfix) with ESMTP id E2F1B37B425 for ; Mon, 29 Apr 2002 10:00:24 -0700 (PDT) Received: from spiral (spiral.dublin.wbtsystems.com [193.120.231.190]) (authenticated bits=0) by slate.dublin.wbtsystems.com (8.12.3/8.12.3) with ESMTP id g3TGxnCI082114; Mon, 29 Apr 2002 17:59:50 +0100 (IST) From: "Barry Byrne" To: "Nils Holland" , Subject: RE: Sendmail and POP3-before-SMTP Date: Mon, 29 Apr 2002 17:59:45 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20020429185110.A6231@daemon.tisys.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal X-Scanned-By: MIMEDefang 2.8 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nils: Haven't tried this, but perhaps if you were to run sendmail in queue only mode, and have a small script which is run when you are connected which runs fetchmail, sleeps for a few seconds (if required) and then runs the sendmail queue? - Barry -- Barry Byrne, IT Manager, WBT Systems, Block 2, Harcourt Centre Harcourt Street, Dublin 2, Ireland > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Nils Holland > Sent: 29 April 2002 17:51 > To: freebsd-questions@FreeBSD.ORG > Subject: Sendmail and POP3-before-SMTP > > > Hi folks, > > I have a question which is not strictly FreeBSD-related, but probably > someone will be able to help me anyway. > > Here's the situation: On my local network, all machines send their mail to > one "gateway" server. That server, connected to the Internet via PPP, > establishes a connection and forwards the mail to my ISP's mail server > (which I specified as "Smart Host" in my local server's sendmail.cf file). > > Now, this works very well, but when my ISP recently had problems > with their > mail servers, I had to fall back to a secondary server, provided by my > webhosting company. This secondary server requires "POP3-before-SMTP" > authentication, so mail has to be fetched from it before mail can be sent. > > Since POP-before-SMTP is not really a "standard" authentication mechanism, > the sendmail on my local server will not be abld to correctly handle the > situation when connecting to my webhost's server. > > The question now is if anybody has an idea if I could do something against > it. My first attempt was to automatically run fetchmail everytime mail was > sent. This didn't really work, however, as fetchmail and sendmail would > both use the PPP connection as soon as it became available, and fetchmail > would have to be "faster" than sendmail for the authentication to work > correctly. This, however, was not really controllable. > > So, does anyone have an idea if I can do something which makes sure that a > POP3 autnentication (for example by running fetchmail) takes place every > time before sendmail relays a message? > > Greetings > Nils > > -- > > Nils Holland > Ti Systems - http://www.tisys.org > Addicted to computing since 1987 > High on FreeBSD since 1996 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10:43:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.infowest.com (ns1.infowest.com [204.17.177.10]) by hub.freebsd.org (Postfix) with ESMTP id 525AA37B400 for ; Mon, 29 Apr 2002 10:43:18 -0700 (PDT) Received: from frodo.jedis.com (brethren.jedis.com [208.186.107.202]) by ns1.infowest.com (Postfix) with ESMTP id DCCAB222A6 for ; Mon, 29 Apr 2002 11:43:01 -0600 (MDT) Received: from there (localhost [127.0.0.1]) by frodo.jedis.com (8.12.2/8.12.2) with SMTP id g3T68Rjl002153 for ; Mon, 29 Apr 2002 00:08:27 -0600 (MDT) (envelope-from kendall@jedis.com) Message-Id: <200204290608.g3T68Rjl002153@frodo.jedis.com> Content-Type: text/plain; charset="iso-8859-1" From: "Kendall P. Gifford" Reply-To: kendall@jedis.com To: questions@freebsd.org Subject: pcm with AC'97 audio not working Date: Mon, 29 Apr 2002 00:08:27 -0600 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all. I have AC'97 audio integrated into my motherboard, an MSI KT3 Ultra-ARU (via apollo kt333 chipset, vt8233a southbridge, with integrated realtek alc650 6-channel ac'97 audio). I get the following line from dmesg during bootup: pcm0: port 0xe800-0xe8ff irq 9 at device 17.5 on pci0 I have also run MAKEDEV snd0; as described in the pcm(4) man page. Then, following the recommended testing procedure in the handbook, I installed mpg123 and tried to play an mp3 with the following results: #mpg123 waste.mp3 [...omitted startup lines...] pcm0:play:0: play interrupt timeout, channel dead I was hoping that there would be support for my on-board sound and was excited when I saw AC'97 support in the pcm driver. Can someone shed some light on the problem? Have I possibly not setup something correctly? Is there some bug that just needs fixed? Is there just not support for my RealTek ALC650 AC'97 Audio yet? Thanks in advance for your help. ======================================== Kendall P. Gifford http://kendall.jedis.com kendall@jedis.com ======================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10:52:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from exchmx2.lsuhsc.edu (exchmx2.lsuhsc.edu [155.58.212.90]) by hub.freebsd.org (Postfix) with ESMTP id 9B1D737B417 for ; Mon, 29 Apr 2002 10:52:41 -0700 (PDT) Received: by exchmx2.lsuhsc.edu with Internet Mail Service (5.5.2653.19) id <2H7J6ARW>; Mon, 29 Apr 2002 12:51:32 -0500 Message-ID: From: "Mire, John" To: freebsd-questions@FreeBSD.org Subject: jigdo on FreeBSD Date: Mon, 29 Apr 2002 12:50:15 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Has anyone gotten jigdo to work under Freebsd either in native mode or under Linux compatibility? http://www.debian.org/CD/jigdo-cd/ -- John Mire: jmire@lsuhsc.edu Network Administration 318-675-5434 LSU Health Sciences Center - Shreveport The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dis- semination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10:56:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from otter.mills-atl.com (dsl-64-192-140-77.telocity.com [64.192.140.77]) by hub.freebsd.org (Postfix) with ESMTP id 3166037B41A for ; Mon, 29 Apr 2002 10:56:49 -0700 (PDT) Received: from localhost (jmills@localhost) by otter.mills-atl.com (8.9.3/8.9.3) with ESMTP id NAA01365 for ; Mon, 29 Apr 2002 13:59:28 -0400 X-Authentication-Warning: otter.mills-atl.com: jmills owned process doing -bs Date: Mon, 29 Apr 2002 13:59:28 -0400 (EDT) From: John Mills X-Sender: jmills@otter.mills-atl.com Reply-To: John Mills To: FreeBSD-questions Subject: 1st-time kernel build questions Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello - I have a couple of questions concerning the process of building FreeBSD from sources. My system is a modest one (133MHz Cyrix 6x86) in which I have installed FreeBSD-4.5 off a downloaded 4.5-RELEASE CD set. I am working through an ASDL link, so web-access speed is reasonable. I would like to have a good kernel with current patches, but so far I'm happy with my intial use of 4.5-RELEASE, and would stay with that version. Naturally my first interest is security, but bugfixes (if any &8-)are nice. It seems as good a time as any to learn how to build a FreeBSD kernel. 1) Looking at the on-line Handbook and at Greg Lehey's FreeBSD Reference, 'cvsup' seems able to either checkout a copy of all or parts of the FreeBSD tree, or to mirror all or part of the CVS repository in my system, from which I then checkout locally. My first idea would be to simply check out a copy of the tree I want. If I don't expect to patch my source, should I really create a local repository? I expect it would at least double the disk space required, even if I manage to mirror just one revision. 2) With regards to building: 'makeworld' target seems to build a full set of tools, libs, and files to support FreeBSD kernel mainenance. This definitely seems like a good idea at this point. Does 'makeworld' work properly without a local CVS repository? Thanks for any suggestions to a FreeBSD beginner. - John Mills To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10:57: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ebert.xypoint.com (ebert.xypoint.com [216.190.251.65]) by hub.freebsd.org (Postfix) with ESMTP id 4DF8737B41F for ; Mon, 29 Apr 2002 10:56:54 -0700 (PDT) Received: by ebert.xypoint.com with Internet Mail Service (5.5.2655.55) id ; Mon, 29 Apr 2002 10:56:35 -0700 Message-ID: <38985D9205A0D411A10500508B10DE6602997719@ebert.xypoint.com> From: Ryan Hill To: "'freebsd-questions@freebsd.org'" Subject: STABLE 4.5 panic: page faults... Date: Mon, 29 Apr 2002 10:56:34 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG my freebsd stable 4.5 box, which was put into production exactly 3 days ago, is now dead. I can't do anything more on the box than a few commands before I get a kernel panic:page fault error and I'm at a loss as to what to do to recover the box. when I came in this morning, the box was running, but a mysqld database was corrupted and when I attempted to stop the snort processes writing there, it core dumped, kernel panic'ed and started rebooting itself continually. I've tried fsck'ing the filesystems back into compliance, but whenever I attempt a second run at fsck (for example, I can't really do anything past 5 minutes uptime) to verify that everything is indeed alright as it reports initially, I get another kernel panic. all of them are of the same trap and type, but the memory address and process varies - I can't even run memtest without the damn thing kernel panic'ing. I've also tried booting into my GENERIC kernel and my .old kernel with no success, they both panic at about the same time. Fatal trap 12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0307cd8 stack pointer = 0x10:0xd7a36dd4 frame pointer = 0x10:0xd7a36dd0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 prcoessor eflags = interupt enabled, resume, IOPL = 0 current process = 11 (fsck) interupt mask = net, tty, bio, cam trap number = 12 panic: page fault help? ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 10:59: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from exchmx2.lsuhsc.edu (exchmx2.lsuhsc.edu [155.58.212.90]) by hub.freebsd.org (Postfix) with ESMTP id CAF2937B41D for ; Mon, 29 Apr 2002 10:58:53 -0700 (PDT) Received: by exchmx2.lsuhsc.edu with Internet Mail Service (5.5.2653.19) id <2H7J6AVM>; Mon, 29 Apr 2002 12:57:44 -0500 Message-ID: From: "Mire, John" To: "Mire, John" , 'Axel Scheepers' , 'Jimmy' Cc: "'freebsd-questions@freebsd.org'" Subject: RE: ipfilter+ipfw Date: Mon, 29 Apr 2002 12:56:31 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I hate correcting myself but it was on freebsd-security -----Original Message----- From: Mire, John Sent: Monday, April 29, 2002 10:49 AM To: 'Axel Scheepers'; Jimmy Cc: freebsd-questions@freebsd.org Subject: RE: ipfilter+ipfw I remember Crist J. Clark had outlined some patches on his website and the pathway to get this to work on freebsd-net I think, try searching the archives.... -- John Mire: jmire@lsuhsc.edu Network Administration 318-675-5434 LSU Health Sciences Center - Shreveport -----Original Message----- From: Axel Scheepers [mailto:axel@axel.truedestiny.net] Sent: Monday, April 29, 2002 7:04 AM To: Jimmy Cc: freebsd-questions@freebsd.org Subject: Re: ipfilter+ipfw On Fri, Apr 26, 2002 at 02:34:06PM +0800, Jimmy wrote: > Hi, > > I've configure my FreeBSD-4.5-STABLE firewall host, and I installed 4 NIC cards on it and I'm using ipfilter to NAT and packet filter & ipfw to bridge and as a traffic shaper. Here are the following list of my NIC card: > > fxp0=localnet1(192.168.100.0/24)nat > xl0=external interface connected to dsl modem > xl1=localnet2(192.168.200.0/24)nat > xl2=filter bridge to xl0 > > The outside world can see my host connected to the bridge NIC and vice versa, except my localnet1 and localnet2. Do I missed something in my configuration? How can I connect my localnet1 & 2 to talk to host connected to xl2 which is being bridge. Hi, It is general a bad idea to mix ipf and ipfilter, ipfilter and ipnat combo works directly on the kernel tables, while ipf runs in userspace and is thus somewhat slower. The 192.168.x.x aren't routed on the internet, and must be remangled to the modem's ip. (NAT) This seems to go wrong. At my place I have ipfilter/ipnat where ipnat does the following: map 192.168.0.0/16 -> 0/32 portmap auto map 192.168.0.0/16 -> 0/32 proxy ftp rdr 0.0.0.0/0 port 80 -> 192.168.0.5 port 80 which directs all traffic to another host in my local lan. You can use tcpdump to see what packets are being forwarded (did you sysctl -w net.inet.ip.forwarding=1?) A couple of extra debug generating rules isn't bad either, to see what gets denied and what goes through. Probably best solution is to stick with one of the two firewalls, instead of using both at the same time. > > TIA, > > Jimmy > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ A fanatic is one who can't change his mind and won't change the subject. -- Winston Churchill ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11: 0:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from asn01.dna.affrc.go.jp (asn01.dna.affrc.go.jp [150.26.230.49]) by hub.freebsd.org (Postfix) with ESMTP id 1F79037B427 for ; Mon, 29 Apr 2002 11:00:16 -0700 (PDT) Received: (from agora@localhost) by asn01.dna.affrc.go.jp (8.9.3/3.7W-19991111) id DAA04189; Tue, 30 Apr 2002 03:00:10 +0900 (JST) Date: Tue, 30 Apr 2002 03:00:10 +0900 (JST) Message-Id: <200204291800.DAA04189@asn01.dna.affrc.go.jp> To: questions@FreeBSD.org Reply-To: agora@dna.affrc.go.jp From: agora@dna.affrc.go.jp Subject: Request unrecognized Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This mail is not a spam but the automatic reply to your mail; Subject: Hi,welcome to my hometown From: questions To: agora@dna.affrc.go.jp Date: Mon, 29 Apr 2002 20:50:22 +0300 (EEST) Message-Id: <200204291750.UAA15126@vizor.lutsk.ua> --------------------------- Sorry, your request 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! 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! 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! 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! 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! my5lJQ24XTqoBq5gBy01GtwOHeMYxvtbirCAsEiUoNPMSlFoxGSU4au3GAZdV718q6U3S61qrwQuEzWpdlEa0KeVv5g4HCsZI8xbKObvtoOxHy+wYmx1uMSeVjYxITkuogfE/7sSZ0pg3eqdZIwpiNZAi8jbuYUxmAMvaf/AELn0/8AH8zwryKccH2j+4w3z3Pymbm+41V82vkaPUNVdHnxnBJTIP8AS1fm38vTztX4+6g4Vyw+MTKMyz/oSV5PBtVdH3UzpjpOfQIDr9qdPIppWnL5taavy5fxYxiJBXnS/wBKuWvVr7vzeHfjGMbf3nuhyq6MqcrTTTQ0/p51r34zCibDz/dxcv3VKyaq10UpJx1ZUpgGA36sc/8ASf8AaV+X+8Xn+rTqo3Cv4df34VhqKHpynzyHv1GlePA4VjrcPZa+2FMSZ01KK79RwhmaLanuU+OMAaf/ALF7b/m/JvZfl5PO/fqwfA/k/9=9--R11llN3vao8-- wasn't recognized To get help, just send a mail to agora@dna.affrc.go.jp, with the body: WWW Automatically yours, The DISC Agora Support support@dna.affrc.go.jp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11: 8: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unidavi.rct-sc.br (sol.unidavi.rct-sc.br [200.135.228.238]) by hub.freebsd.org (Postfix) with ESMTP id 5AFCC37B627 for ; Mon, 29 Apr 2002 11:04:00 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by unidavi.rct-sc.br (8.11.1/8.11.1) with ESMTP id g3TI4OV09949 for ; Mon, 29 Apr 2002 15:04:25 -0300 Received: from 200.135.228.94 ( [200.135.228.94]) as user lab.stihler@localhost by www.unidavi.edu.br with HTTP; Mon, 29 Apr 2002 15:04:24 -0300 Message-ID: <1020103464.3ccd8b281cf30@www.unidavi.edu.br> Date: Mon, 29 Apr 2002 15:04:24 -0300 From: lab.stihler@unidavi.edu.br To: question freebsd Subject: StarOffice 5.2 installation MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have this file: so-5_2-ga-bin-linux-pt.bin that is the official file from Sun (I guess) Where do I find info on how to install it under freebsd? I tried to install it but it fails and tells me about a missing lib-file. Is there some StarOffice-HOWTO out there? :) note: I already have the linux emulation up and running. I just dont know how to install the applications and use it. regards. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:14:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from thick.mail.pipex.net (thick.mail.pipex.net [158.43.192.95]) by hub.freebsd.org (Postfix) with SMTP id 7C05437B6B3 for ; Mon, 29 Apr 2002 11:13:35 -0700 (PDT) Received: (qmail 26950 invoked from network); 29 Apr 2002 18:11:06 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-3.dial.pipex.com with SMTP; 29 Apr 2002 18:11:06 -0000 Subject: I'm subscribed, so why aren't my questions being posted? From: Stacey Roberts Reply-To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com To: freebsd-questions@FreeBSD.ORG Cc: postmaster@FreeBSD.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 19:09:51 +0100 Message-Id: <1020103791.307.10.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello There, This is a last resort for me. I've noticed that I no longer see my questions being posted to this list. I know that I'm still subscribed, as I still receive e-mail containing the postings of other list subscribers. So what is it that has changed over the last two months? I'm trying really hard to understand what has gone wrong, but I am as yet unaware of anything done on my system that is causing this. I know that my mail works as I've (in testing) cc'd myself on a few of last questions just to see if it gets delivered - and they have indeed been delivered. Please let me know what is going on.. Stacey -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:16:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from thick.mail.pipex.net (thick.mail.pipex.net [158.43.192.95]) by hub.freebsd.org (Postfix) with SMTP id 1042337B427 for ; Mon, 29 Apr 2002 11:16:50 -0700 (PDT) Received: (qmail 27504 invoked from network); 29 Apr 2002 18:14:21 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-3.dial.pipex.com with SMTP; 29 Apr 2002 18:14:21 -0000 Subject: test From: Stacey Roberts Reply-To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com To: questions@FreeBSD.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 19:13:07 +0100 Message-Id: <1020103987.307.12.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG test -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:19:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id 46E4F37B41A for ; Mon, 29 Apr 2002 11:19:15 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 172Fjl-0004hk-00; Mon, 29 Apr 2002 19:18:57 +0100 Date: Mon, 29 Apr 2002 19:18:57 +0100 From: Ceri Davies To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com Cc: questions@FreeBSD.org Subject: Re: test Message-ID: <20020429181857.GB17858@submonkey.net> Mail-Followup-To: Ceri Davies , stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com, questions@FreeBSD.org References: <1020103987.307.12.camel@Demon.Strobe.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1020103987.307.12.camel@Demon.Strobe.org> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 07:13:07PM +0100, Stacey Roberts wrote: > test Ok so you're frustated, fair enough. But there is a test@freebsd.org mailing list for this. Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:23: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from exchmx2.lsuhsc.edu (exchmx2.lsuhsc.edu [155.58.212.90]) by hub.freebsd.org (Postfix) with ESMTP id A634537B400 for ; Mon, 29 Apr 2002 11:22:56 -0700 (PDT) Received: by exchmx2.lsuhsc.edu with Internet Mail Service (5.5.2653.19) id <2H7J6B1F>; Mon, 29 Apr 2002 13:21:47 -0500 Message-ID: From: "Mire, John" To: "'Kohler, Raymond J'" , 'Moti' , freebsd-questions@FreeBSD.ORG Subject: RE: IPfilter version ? Date: Mon, 29 Apr 2002 13:20:27 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG is there a set upgrade procedure other that the directions included in the tarball for 3.4.25 to upgrade the kernel source without generating errors in FBSD? -----Original Message----- From: Kohler, Raymond J [mailto:raymond.j.kohler@lmco.com] Sent: Friday, April 26, 2002 10:29 AM To: 'Moti'; freebsd-questions@FreeBSD.ORG Subject: RE: IPfilter version ? > -----Original Message----- > From: Moti [mailto:moti@flncs.com] > Sent: Friday, April 26, 2002 11:28 AM > To: freebsd-questions@FreeBSD.ORG > Subject: IPfilter version ? > > > Hi , > a quick question > does ther ipfilter source being updated on stable ? > if i go to the ipfilter site the current version is 3.4.25 > on my stable ( as of yesterday ) machine ipf -V shoes IP > Filter: v3.4.20 > (264) > am i doing something wrong ? > i've lloked through make.conf and found nothing ... I understand it will happen soon, Darren was waiting to get to 3.4.25 on -current and that just happened. -- Ray To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:36: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 6ABA137B416 for ; Mon, 29 Apr 2002 11:35:55 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TIYVU25504; Mon, 29 Apr 2002 14:34:39 -0400 Message-ID: <3CCD936E.2050601@potentialtech.com> Date: Mon, 29 Apr 2002 14:39:42 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: lab.stihler@unidavi.edu.br Cc: question freebsd Subject: Re: StarOffice 5.2 installation References: <1020103464.3ccd8b281cf30@www.unidavi.edu.br> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG lab.stihler@unidavi.edu.br wrote: > Hi I have this file: so-5_2-ga-bin-linux-pt.bin > that is the official file from Sun (I guess) > Where do I find info on how to install it under > freebsd? I tried to install it but it fails and > tells me about a missing lib-file. Is there some > StarOffice-HOWTO out there? :) > > note: I already have the linux emulation up > and running. I just dont know how to install the > applications and use it. StarOffice has a port, as root enter: cd /usr/ports/editors/staroffice52; make install If you've already downloaded the source file, put it in /usr/ports/distfiles first, so the make process can find it. If you're unfamiliar with the ports setup, I suggest reading the handbook section: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:41: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 36F7337B41A for ; Mon, 29 Apr 2002 11:40:58 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TIdHU25551; Mon, 29 Apr 2002 14:39:17 -0400 Message-ID: <3CCD948C.4030807@potentialtech.com> Date: Mon, 29 Apr 2002 14:44:28 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: I'm subscribed, so why aren't my questions being posted? References: <1020103791.307.10.camel@Demon.Strobe.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Stacey Roberts wrote: > Hello There, > This is a last resort for me. > > I've noticed that I no longer see my questions being posted to this > list. > > I know that I'm still subscribed, as I still receive e-mail containing > the postings of other list subscribers. So what is it that has changed > over the last two months? > > I'm trying really hard to understand what has gone wrong, but I am as > yet unaware of anything done on my system that is causing this. I know > that my mail works as I've (in testing) cc'd myself on a few of last > questions just to see if it gets delivered - and they have indeed been > delivered. Some more detail would be nice. Do you get bounce messages? Perhaps your ISP changed their SMTP server config and broke the reverse DNS. The mailing lists will reject an SMTP server with no reverse DNS. If your emails are simply disappearing into the Ether, then good luck figuring it out. That shouldn't really happen, if the message can't be delivered, you should get a bounce message. Again, your ISP may have broken something in their SMTP config. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:41:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sm11.texas.rr.com (sm11.texas.rr.com [24.93.35.42]) by hub.freebsd.org (Postfix) with ESMTP id 5160D37B400 for ; Mon, 29 Apr 2002 11:41:12 -0700 (PDT) Received: from roadrunner1 (cs164193-11.jam.rr.com [24.164.193.11]) by sm11.texas.rr.com (8.12.1/8.12.0) with SMTP id g3TIZJtk028968 for ; Mon, 29 Apr 2002 13:35:24 -0500 Message-ID: <000901c1efad$6f7984a0$4101a8c0@roadrunner1> From: "chris1" To: Subject: Date: Mon, 29 Apr 2002 13:41:06 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0005_01C1EF83.83224520" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 Disposition-Notification-To: "chris1" X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1EF83.83224520 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0006_01C1EF83.83224520" ------=_NextPart_001_0006_01C1EF83.83224520 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have bought a copy of freebds ver.4.4 - When trying to install it I = get a screen that says my version must be 2.1 or earlier because my = computer can't read the CD ver. =20 Is my CD bad? My e-mail is mbailey@jam.rr.com ------=_NextPart_001_0006_01C1EF83.83224520 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I have bought a copy of freebds ver.4.4 = - When=20 trying to install it I get a screen that says my version must be 2.1 or = earlier=20 because my computer can't read the CD ver. 
 
Is my CD bad?
 
My e-mail is=20 mbailey@jam.rr.com
------=_NextPart_001_0006_01C1EF83.83224520-- ------=_NextPart_000_0005_01C1EF83.83224520 Content-Type: text/x-vcard; name="chris1.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="chris1.vcf" BEGIN:VCARD VERSION:2.1 N:;chris1 FN:chris1 EMAIL;PREF;INTERNET:chris1@jam.rr.com REV:20020429T184106Z END:VCARD ------=_NextPart_000_0005_01C1EF83.83224520-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:45:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c001.snv.cp.net (c001-h005.c001.snv.cp.net [209.228.32.119]) by hub.freebsd.org (Postfix) with SMTP id DC24637B434 for ; Mon, 29 Apr 2002 11:45:25 -0700 (PDT) Received: (cpmta 26272 invoked from network); 29 Apr 2002 11:45:23 -0700 Received: from 209.228.32.138 (HELO mail.atkinshome.com.criticalpath.net) by smtp.register-admin.com (209.228.32.119) with SMTP; 29 Apr 2002 11:45:23 -0700 X-Sent: 29 Apr 2002 18:45:23 GMT Received: from [64.75.4.241] by mail.atkinshome.com with HTTP; Mon, 29 Apr 2002 11:44:58 -0700 (PDT) Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG From: dave@atkinshome.com Subject: samba/inetd - netbios-ns/udp: bind: Address already in use error messages X-Sent-From: dave@atkinshome.com Date: Mon, 29 Apr 2002 11:44:58 -0700 (PDT) X-Mailer: Web Mail 5.0.8-8 Message-Id: <20020429114523.9979.h023.c001.wm@mail.atkinshome.com.criticalpath.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have several 4.5-RELEASE freeBSD servers running with samba 2.2.3a. I have enabled samba to run from inetd.conf via: # Enable the following two entries to enable samba startup from inetd # (from the Samba documentation). Enable the third entry to enable the swat # samba configuration tool. # netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd #swat stream tcp nowait.400 root /usr/local/samba/bin/swat swat I have checked rc.conf and default rc.conf for any other startup scripting to start samba and found none. The kernel log files contain these messages, constantly: crwebx3.crdc.consumerreview.org kernel log messages: > Apr 27 03:05:48 crwebx3 inetd[70]: netbios-ns/udp: bind: Address already in use > Apr 27 03:15:48 crwebx3 inetd[70]: netbios-ns/udp: bind: Address already in use > Apr 27 03:25:49 crwebx3 inetd[70]: netbios-ns/udp: bind: Address already in use > Apr 27 03:35:49 crwebx3 inetd[70]: netbios-ns/udp: bind: Address already in use > Apr 27 03:45:49 crwebx3 inetd[70]: netbios-ns/udp: bind: Address already in use I have one other freeBSD server, same version, that I installed identically (I did 3 machines at once), but I do not see these error messages. I do not know what could be different in the configuration. any ideas? The error does not appear to be harmful--samba is working fine...but I should resolve this. ------------------------------------------------------------ Dave Atkins Director, Engineering ConsumerReview.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:51:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 3A67737B400 for ; Mon, 29 Apr 2002 11:51:29 -0700 (PDT) Received: (qmail 27703 invoked from network); 29 Apr 2002 18:51:27 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-2.dial.pipex.com with SMTP; 29 Apr 2002 18:51:27 -0000 Subject: Re: I'm subscribed, so why aren't my questions being posted? From: Stacey Roberts Reply-To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com To: Bill Moran Cc: freebsd-questions@FreeBSd.org In-Reply-To: <3CCD948C.4030807@potentialtech.com> References: <1020103791.307.10.camel@Demon.Strobe.org> <3CCD948C.4030807@potentialtech.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 19:47:45 +0100 Message-Id: <1020106066.307.28.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Bill, Thanks for the response. I've not gotten anything from either the mailing list to say that my e-mail was rejected, nor from my ISP's mail server indicating that there was a problem sending the mail. I would say here though, that as much as I'm heartened by the fact that there are replies to my posting today, I still haven't actually received the *original* posting I sent to the list sent to me - which has always been a sign that it actually got to the list. Or., has the situation changed? Stacey On Mon, 2002-04-29 at 20:44, Bill Moran wrote: > Stacey Roberts wrote: > > Hello There, > > This is a last resort for me. > > > > I've noticed that I no longer see my questions being posted to this > > list. > > > > I know that I'm still subscribed, as I still receive e-mail containing > > the postings of other list subscribers. So what is it that has changed > > over the last two months? > > > > I'm trying really hard to understand what has gone wrong, but I am as > > yet unaware of anything done on my system that is causing this. I know > > that my mail works as I've (in testing) cc'd myself on a few of last > > questions just to see if it gets delivered - and they have indeed been > > delivered. > > Some more detail would be nice. Do you get bounce messages? Perhaps > your ISP changed their SMTP server config and broke the reverse DNS. > The mailing lists will reject an SMTP server with no reverse DNS. > > If your emails are simply disappearing into the Ether, then good luck > figuring it out. That shouldn't really happen, if the message can't > be delivered, you should get a bounce message. Again, your ISP may > have broken something in their SMTP config. > -- > Bill Moran > Potential Technology > http://www.potentialtech.com > -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:55:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rain.CC.Lehigh.EDU (rain.CC.Lehigh.EDU [128.180.39.20]) by hub.freebsd.org (Postfix) with ESMTP id 3D90337B400 for ; Mon, 29 Apr 2002 11:55:09 -0700 (PDT) Received: from bibimbap (r143114.res.Lehigh.EDU [128.180.143.114]) by rain.CC.Lehigh.EDU (8.12.2/8.12.2) with SMTP id g3TIt3eM022870 for ; Mon, 29 Apr 2002 14:55:03 -0400 Message-ID: <000801c1efaf$0db8ba90$728fb480@bibimbap> From: "Albert Lee" To: Subject: Problem with installing a tape drives Date: Mon, 29 Apr 2002 14:52:46 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1EF8D.8660C2C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1EF8D.8660C2C0 Content-Type: text/plain; charset="ks_c_5601-1987" Content-Transfer-Encoding: quoted-printable I'm running FreeBSD version 4.3, and am trying to install a Quantum = DLT-4000 through an adaptec Ultra 160-SCSI 39160 card. However, when I = install the tape drive, I get the following message: Apr 28 15:35:55 francisbacon /kernel: ahc2: Transceiver State Has = Changed to SE mode Apr 28 15:35:55 francisbacon /kernel: ahc2: Someone reset channel A This is while the OS is on. If I restart, I get an infinite loop when = FreeBSD is reading the SCSI devices on startup: ahc2: Someone reset channel A Any help would be greatly appreciated. -Albert Lee ------=_NextPart_000_0005_01C1EF8D.8660C2C0 Content-Type: text/html; charset="ks_c_5601-1987" Content-Transfer-Encoding: quoted-printable
I'm running FreeBSD version 4.3, and am = trying to=20 install a Quantum DLT-4000 through an adaptec Ultra 160-SCSI 39160 = card. =20 However, when I install the tape drive, I get the following=20 message:
 
Apr 28 15:35:55 francisbacon /kernel: = ahc2:=20 Transceiver State Has Changed to SE
mode
Apr 28 15:35:55 = francisbacon=20 /kernel: ahc2: Someone reset channel A
This is while the OS is on.  If I = restart, I=20 get an infinite loop when FreeBSD is reading the SCSI devices on=20 startup:
ahc2: Someone reset channel = A
 
Any help would be greatly = appreciated.
-Albert Lee

 ------=_NextPart_000_0005_01C1EF8D.8660C2C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 11:59:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 5A0AB37B400 for ; Mon, 29 Apr 2002 11:59:31 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TIxWU25726; Mon, 29 Apr 2002 14:59:32 -0400 Message-ID: <3CCD994B.90807@potentialtech.com> Date: Mon, 29 Apr 2002 15:04:43 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: dave@atkinshome.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: samba/inetd - netbios-ns/udp: bind: Address already in use error messages References: <20020429114523.9979.h023.c001.wm@mail.atkinshome.com.criticalpath.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG dave@atkinshome.com wrote: > I have several 4.5-RELEASE freeBSD servers running with samba 2.2.3a. I have > enabled samba to run from inetd.conf via: > > # Enable the following two entries to enable samba startup from inetd > # (from the Samba documentation). Enable the third entry to enable the swat > # samba configuration tool. > # > netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd > netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd > #swat stream tcp nowait.400 root /usr/local/samba/bin/swat swat > > I have checked rc.conf and default rc.conf for any other startup scripting to > start samba and found none. Have you checked /usr/local/etc/rc.d for a startup script? Can you run sockstat to verify whether an smbd is listening for connections when nobody is connecting? If so, smbd has started in daemon mode, probably from /usr/local/etc/rc.d -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12: 6: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 5C1FE37B419 for ; Mon, 29 Apr 2002 12:05:58 -0700 (PDT) Received: (qmail 7592 invoked from network); 29 Apr 2002 19:05:56 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-1.dial.pipex.com with SMTP; 29 Apr 2002 19:05:56 -0000 Subject: Re: test From: Stacey Roberts Reply-To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com To: Ceri Davies Cc: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com, questions@FreeBSD.org In-Reply-To: <20020429181857.GB17858@submonkey.net> References: <1020103987.307.12.camel@Demon.Strobe.org> <20020429181857.GB17858@submonkey.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 20:02:15 +0100 Message-Id: <1020106935.307.42.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am so very sorry for this, but I there are no assurances that my postings make it to the list. None of my queries (including this one, I might add) appears copied to me, so how am I supposed to know what's happening? I don't mean to put you in it, but if I don't get a copy of my question, then how do I know if my posting successfully made it to the list? Stacey On Mon, 2002-04-29 at 20:18, Ceri Davies wrote: > On Mon, Apr 29, 2002 at 07:13:07PM +0100, Stacey Roberts wrote: > > test > > Ok so you're frustated, fair enough. > > But there is a test@freebsd.org mailing list for this. > > Ceri > > -- > get the cool shoe shine -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12: 6:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 26F3C37B404 for ; Mon, 29 Apr 2002 12:06:49 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g3TJ6Sw2023134; Mon, 29 Apr 2002 15:06:28 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: pcm with AC'97 audio not working From: Joe Marcus Clarke To: kendall@jedis.com Cc: questions@FreeBSD.ORG In-Reply-To: <200204290608.g3T68Rjl002153@frodo.jedis.com> References: <200204290608.g3T68Rjl002153@frodo.jedis.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 15:06:28 -0400 Message-Id: <1020107188.22787.22.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-04-29 at 03:08, Kendall P. Gifford wrote: > Hello all. I have AC'97 audio integrated into my motherboard, an MSI KT3 > Ultra-ARU (via apollo kt333 chipset, vt8233a southbridge, with integrated > realtek alc650 6-channel ac'97 audio). I get the following line from dmesg > during bootup: > > pcm0: port 0xe800-0xe8ff irq 9 at device 17.5 on pci0 > > I have also run MAKEDEV snd0; as described in the pcm(4) man page. Then, > following the recommended testing procedure in the handbook, I installed > mpg123 and tried to play an mp3 with the following results: > > #mpg123 waste.mp3 > [...omitted startup lines...] > pcm0:play:0: play interrupt timeout, channel dead Try applying this patch to /sys/dev/sound/pcm/ac97.c http://docs.freebsd.org/cgi/getmsg.cgi?fetch=14481+0+archive/2002/freebsd-multimedia/20020414.freebsd-multimedia In fact, you may find some use in this whole thread. It looks like some patches are being committed to -current to address this problem. Joe > > I was hoping that there would be support for my on-board sound and was > excited when I saw AC'97 support in the pcm driver. Can someone shed some > light on the problem? Have I possibly not setup something correctly? Is > there some bug that just needs fixed? Is there just not support for my > RealTek ALC650 AC'97 Audio yet? > > Thanks in advance for your help. > ======================================== > Kendall P. Gifford > http://kendall.jedis.com > kendall@jedis.com > ======================================== > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12: 9:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from snowstorm.mail.pipex.net (snowstorm.mail.pipex.net [158.43.192.97]) by hub.freebsd.org (Postfix) with SMTP id C600637B41C for ; Mon, 29 Apr 2002 12:09:32 -0700 (PDT) Received: (qmail 28867 invoked from network); 29 Apr 2002 19:09:31 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-5.dial.pipex.com with SMTP; 29 Apr 2002 19:09:31 -0000 Subject: Re: test From: Stacey Roberts Reply-To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com To: Christopher Schulte Cc: freebsd-questions@FreeBSD.org In-Reply-To: <5.1.0.14.0.20020429131711.05bc8058@pop3s.schulte.org> References: <5.1.0.14.0.20020429131711.05bc8058@pop3s.schulte.org> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 20:05:50 +0100 Message-Id: <1020107150.307.47.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Christopher, Perhaps then, you might suggest, how I am to know if my posting successfully made it to the list, if no copy is e-mailed to me? I take your point that my test e-mail was not proper, but at the end of the day, my "test" still hasn't appeared in my Inbox. Given this, what would you, or any other member suggest I do about my situation? I'm quite happy to make whatever checks / enquiries required in order to determine if its a problem on my side, but with no responses, I'm not left with a lot of options. Stacey On Mon, 2002-04-29 at 20:18, Christopher Schulte wrote: > At 07:13 PM 4/29/2002 +0100, you wrote: > >test > > Please do not use a public list for testing. > > test@freebsd.org exists for this purpose. > > >-- > >Stacey Roberts B.Sc. (HONS) Computer Science > >Network Systems Engineer > -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:16:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.liwing.de (mail.liwing.de [213.70.188.162]) by hub.freebsd.org (Postfix) with ESMTP id B679A37B417 for ; Mon, 29 Apr 2002 12:16:40 -0700 (PDT) Received: (qmail 34678 invoked from network); 29 Apr 2002 19:30:54 -0000 Received: from stingray.liwing.de (HELO liwing.de) ([213.70.188.164]) (envelope-sender ) by mail.liwing.de (qmail-ldap-1.03) with SMTP for ; 29 Apr 2002 19:30:54 -0000 Message-ID: <3CCD9A91.2C797EC9@liwing.de> Date: Mon, 29 Apr 2002 21:10:09 +0200 From: Jens Rehsack Organization: LiWing IT-Services X-Mailer: Mozilla 4.78 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: stacey@dsl.pipex.com, sroberts84@btopenworld.com, sroberts84@hotmail.com Cc: Bill Moran , freebsd-questions@FreeBSd.org Subject: Re: I'm subscribed, so why aren't my questions being posted? References: <1020103791.307.10.camel@Demon.Strobe.org> <3CCD948C.4030807@potentialtech.com> <1020106066.307.28.camel@Demon.Strobe.org> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Stacey Roberts wrote: > > Hi Bill, > Thanks for the response. > > I've not gotten anything from either the mailing list to say that my > e-mail was rejected, nor from my ISP's mail server indicating that there > was a problem sending the mail. I got this problem half a year ago, too. The bounce-mail came back several days later, so waiting for it could help. Or you use a freemail account so far... So long, Jens > I would say here though, that as much as I'm heartened by the fact that > there are replies to my posting today, I still haven't actually received > the *original* posting I sent to the list sent to me - which has always > been a sign that it actually got to the list. Or., has the situation > changed? > > Stacey > > On Mon, 2002-04-29 at 20:44, Bill Moran wrote: > > Stacey Roberts wrote: > > > Hello There, > > > This is a last resort for me. > > > > > > I've noticed that I no longer see my questions being posted to this > > > list. > > > > > > I know that I'm still subscribed, as I still receive e-mail containing > > > the postings of other list subscribers. So what is it that has changed > > > over the last two months? > > > > > > I'm trying really hard to understand what has gone wrong, but I am as > > > yet unaware of anything done on my system that is causing this. I know > > > that my mail works as I've (in testing) cc'd myself on a few of last > > > questions just to see if it gets delivered - and they have indeed been > > > delivered. > > > > Some more detail would be nice. Do you get bounce messages? Perhaps > > your ISP changed their SMTP server config and broke the reverse DNS. > > The mailing lists will reject an SMTP server with no reverse DNS. > > > > If your emails are simply disappearing into the Ether, then good luck > > figuring it out. That shouldn't really happen, if the message can't > > be delivered, you should get a bounce message. Again, your ISP may > > have broken something in their SMTP config. > > -- > > Bill Moran > > Potential Technology > > http://www.potentialtech.com > > > -- > Stacey Roberts B.Sc. (HONS) Computer Science > Network Systems Engineer > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- L i W W W i Jens Rehsack L W W W L i W W W W i nnn gggg LiWing IT-Services L i W W W W i n n g g LLLL i W W i n n g g Friesenstraße 2 gggg 06112 Halle g g g Tel.: +49 - 3 45 - 5 17 05 91 ggg e-Mail: Fax: +49 - 3 45 - 5 17 05 92 http://www.liwing.de/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:22: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from harrier.prod.itd.earthlink.net (harrier.mail.pas.earthlink.net [207.217.120.12]) by hub.freebsd.org (Postfix) with ESMTP id 320DD37B43A for ; Mon, 29 Apr 2002 12:21:45 -0700 (PDT) Received: from user-119a7q7.biz.mindspring.com ([66.149.31.71] helo=athlon.wsonline.net) by harrier.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 172GiQ-0005bM-00; Mon, 29 Apr 2002 12:21:38 -0700 Message-Id: <5.1.0.14.0.20020429131431.00a82218@pop.wsonline.net> X-Sender: richardh@pop.wsonline.net X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 29 Apr 2002 13:25:32 -0600 To: Bryan Curl , freebsd-questions From: RichardH Subject: Re: Boot Manager Conversion In-Reply-To: <20020429164735.49325.qmail@web20502.mail.yahoo.com> Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====================_18798828==_.ALT" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=====================_18798828==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Last year I was triple booting 98/BSD/Slackware, all I did was write the BSD partition to the Lilo bootloader that Slackware used. Was the easiest solution. I don't recall exactly what the entries were but it was only about 4-5 lines. If you have Lilo installed with all 3 OS's on the hard drive and it is already dual booting Win98 and Linux then you can just look at those entries and you should be able to figure out what entries BSD needs with a little playing around. Then you should be able to copy that Lilo config to a floppy and boot it. I am not sure at all if this will be the same with Mandrake as I have never used it since it is pretty much the Linux version of Windows but I know you can do it with Win98, BSD and Slack. Hope that helps. Richard Hutson At 10:47 AM 4/29/2002, Bryan Curl wrote: >I have a doal boot system now, Win98/Linux mandrake 7.02. > >Recently experimented with FreeBSD and really like it. But I had installed >the MBR onto the hard drive, which means I have to swap IDE cables to from >the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux >in favor of BSD but havent ported all my homebrew apps yet. So, I need to >tripple boot if possible. That means I need to get the MBR off the BSD >drive onto a floppy and use a boot loader that will work with Win98, >Linux, and FreeBSD. > >How do I convert my FreeBSD so it boots from a floppy using a boot loader >instead of booting from the MBS on the hard drive? > > > > >Mucho Gratis >Bryan >--bc3910@yahoo.com > > > >Do You Yahoo!? >Yahoo! Health - your >guide to health and wellness --=====================_18798828==_.ALT Content-Type: text/html; charset="us-ascii" Last year I was triple booting 98/BSD/Slackware, all I did was write the BSD partition to the Lilo bootloader that Slackware used. Was the easiest solution. I don't recall exactly what the entries were but it was only about 4-5 lines. If you have Lilo installed with all 3 OS's on the hard drive and it is already dual booting Win98 and Linux then you can just look at those entries and you should be able to figure out what entries BSD needs with a little playing around. Then you should be able to copy that Lilo config to a floppy and boot it. I am not sure at all if this will be the same with Mandrake as I have never used it since it is pretty much the Linux version of Windows but I know you can do it with Win98, BSD and Slack. Hope that helps. Richard Hutson


At 10:47 AM 4/29/2002, Bryan Curl wrote:

I have a doal boot system now, Win98/Linux mandrake 7.02.

Recently experimented with FreeBSD and really like it. But I had installed the MBR onto the hard drive, which means I have to swap IDE cables to from the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux in favor of BSD but havent ported all my homebrew apps yet. So, I need to tripple boot if possible. That means I need to get the MBR off the BSD drive onto a floppy and use a boot loader that will work with Win98, Linux, and FreeBSD.

How do I convert my FreeBSD so it boots from a floppy using a boot loader instead of booting from the MBS on the hard drive?

 


Mucho Gratis
Bryan
--bc3910@yahoo.com



Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
--=====================_18798828==_.ALT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:22:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-64-165-226-18.dsl.lsan03.pacbell.net [64.165.226.18]) by hub.freebsd.org (Postfix) with ESMTP id C14FD37B419; Mon, 29 Apr 2002 12:22:07 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 49DA566C2B; Mon, 29 Apr 2002 12:22:07 -0700 (PDT) Date: Mon, 29 Apr 2002 12:22:07 -0700 From: Kris Kennaway To: Anton Shcherbinin Cc: Greg 'groggy' Lehey , freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it? Message-ID: <20020429122206.A55341@xor.obsecurity.org> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="jRHKVT23PllUwdXP" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <1411696390.20020428231738@fastmail.fm>; from useperl@fastmail.fm on Sun, Apr 28, 2002 at 11:17:38PM +0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --jRHKVT23PllUwdXP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Apr 28, 2002 at 11:17:38PM +0400, Anton Shcherbinin wrote: > As I have already said, the same happens with any application and any > host. E. g., with ftp and ftp.freebsd.org :=20 > 1) my host queries our DNS server for AAAA record of ftp.freebsd.org > 2) query times out in 5 secs > 3) the same query > 4) query times out in 10 secs > 5) the same query > 6) query times out in 20 secs > 7) the same query > 8) query times out in 40 secs Your DNS server is broken. It should be returning an error if it doesn't understand the AAAA request, or an appropriate IPv6 address if it exists, or an "address not found" packet. Kris --jRHKVT23PllUwdXP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8zZ1eWry0BWjoQKURAvJBAJ9mFhJJsfLiVVwfxWAL6qJyK1UF9ACaAz/B VrhUiAbPKrL6BzKaefDvQN0= =f8NW -----END PGP SIGNATURE----- --jRHKVT23PllUwdXP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:24:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-64-165-226-18.dsl.lsan03.pacbell.net [64.165.226.18]) by hub.freebsd.org (Postfix) with ESMTP id A3F2537B405 for ; Mon, 29 Apr 2002 12:24:34 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 41A1B66C2B; Mon, 29 Apr 2002 12:24:34 -0700 (PDT) Date: Mon, 29 Apr 2002 12:24:34 -0700 From: Kris Kennaway To: Patrick O'Reilly Cc: FreeBSD Question List Subject: Re: Is this someone trying to Crack my box? Message-ID: <20020429122434.B55341@xor.obsecurity.org> References: <004301c1ef51$84e9aa60$b50d030a@PATRICK> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="4SFOXa2GPu3tIq4H" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <004301c1ef51$84e9aa60$b50d030a@PATRICK>; from peri@perimeter.co.za on Mon, Apr 29, 2002 at 09:43:08AM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --4SFOXa2GPu3tIq4H Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Apr 29, 2002 at 09:43:08AM +0200, Patrick O'Reilly wrote: > Is this an attempt to break in? It could be. > This box is still running 4.2-RELEASE with the standard sshd shipped > with that release, though bind has been updated to BIND 9.1.3. That version has remote vulnerabilities. You could have found this out for youself by reading the security advisories on the website. Kris --4SFOXa2GPu3tIq4H Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8zZ3xWry0BWjoQKURAsaRAKDICf5hDyO7v2/xRpqnEow+HFytqgCffYrE F/SHtTeo+hKOM5J88lG2+gs= =2u+6 -----END PGP SIGNATURE----- --4SFOXa2GPu3tIq4H-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:27:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id AC22337B429 for ; Mon, 29 Apr 2002 12:27:36 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172GoB-0007NN-00 for questions@freebsd.org; Mon, 29 Apr 2002 12:27:35 -0700 Message-ID: <00af01c1efcd$32f78160$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: Cron can't exec /bin/sh Date: Mon, 29 Apr 2002 15:28:33 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hihi, Why can't cron exec /bin/sh? I got this e-mail as root..: cron: execl: couldn't exec `/bin/sh': Permission denied This is my crontab file: 0 0 * * 0 cvsup supfile This is my supfile: *default tag=. *default host=cvsup.freebsd.org *default prefix=/usr *default base=/usr/local/etc/cvsup *default release=cvs delete use-rel-suffix compress ports-all Anybody see a problem? - Christopher J. Umina To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:29:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from snowstorm.mail.pipex.net (snowstorm.mail.pipex.net [158.43.192.97]) by hub.freebsd.org (Postfix) with SMTP id 050C437B41A for ; Mon, 29 Apr 2002 12:29:40 -0700 (PDT) Received: (qmail 2780 invoked from network); 29 Apr 2002 19:29:38 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-6.dial.pipex.com with SMTP; 29 Apr 2002 19:29:38 -0000 Subject: Re: I'm subscribed, so why aren't my questions being posted? From: Stacey Roberts Reply-To: stacey@dsl.pipex.com To: Jens Rehsack Cc: Bill Moran , freebsd-questions@FreeBSd.org In-Reply-To: <3CCD9A91.2C797EC9@liwing.de> References: <1020103791.307.10.camel@Demon.Strobe.org> <3CCD948C.4030807@potentialtech.com> <1020106066.307.28.camel@Demon.Strobe.org> <3CCD9A91.2C797EC9@liwing.de> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 20:25:57 +0100 Message-Id: <1020108357.307.61.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Jens, I've been eagerly checking for returned mail error messages for the last month, hoping to catch a clue as to why this was happening, but with no luck so far. Stacey On Mon, 2002-04-29 at 21:10, Jens Rehsack wrote: >=20 >=20 > Stacey Roberts wrote: > >=20 > > Hi Bill, > > Thanks for the response. > >=20 > > I've not gotten anything from either the mailing list to say that my > > e-mail was rejected, nor from my ISP's mail server indicating that ther= e > > was a problem sending the mail. >=20 > I got this problem half a year ago, too. The bounce-mail came back severa= l days > later, so waiting for it could help. Or you use a freemail account so far= ... >=20 > So long, > Jens >=20 > > I would say here though, that as much as I'm heartened by the fact that > > there are replies to my posting today, I still haven't actually receive= d > > the *original* posting I sent to the list sent to me - which has always > > been a sign that it actually got to the list. Or., has the situation > > changed? > >=20 > > Stacey > >=20 > > On Mon, 2002-04-29 at 20:44, Bill Moran wrote: > > > Stacey Roberts wrote: > > > > Hello There, > > > > This is a last resort for me. > > > > > > > > I've noticed that I no longer see my questions being posted to this > > > > list. > > > > > > > > I know that I'm still subscribed, as I still receive e-mail contain= ing > > > > the postings of other list subscribers. So what is it that has chan= ged > > > > over the last two months? > > > > > > > > I'm trying really hard to understand what has gone wrong, but I am = as > > > > yet unaware of anything done on my system that is causing this. I k= now > > > > that my mail works as I've (in testing) cc'd myself on a few of las= t > > > > questions just to see if it gets delivered - and they have indeed b= een > > > > delivered. > > > > > > Some more detail would be nice. Do you get bounce messages? Perhaps > > > your ISP changed their SMTP server config and broke the reverse DNS. > > > The mailing lists will reject an SMTP server with no reverse DNS. > > > > > > If your emails are simply disappearing into the Ether, then good luck > > > figuring it out. That shouldn't really happen, if the message can't > > > be delivered, you should get a bounce message. Again, your ISP may > > > have broken something in their SMTP config. > > > -- > > > Bill Moran > > > Potential Technology > > > http://www.potentialtech.com > > > > > -- > > Stacey Roberts B.Sc. (HONS) Computer Science > > Network Systems Engineer > >=20 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message >=20 > --=20 > L i W W W i Jens Rehsack > L W W W > L i W W W W i nnn gggg LiWing IT-Services > L i W W W W i n n g g > LLLL i W W i n n g g Friesenstra=DFe 2 > gggg 06112 Halle > g > g g > Tel.: +49 - 3 45 - 5 17 05 91 ggg e-Mail: > Fax: +49 - 3 45 - 5 17 05 92 http://www.liwing.de/ --=20 Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:37:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f187.law7.hotmail.com [216.33.237.187]) by hub.freebsd.org (Postfix) with ESMTP id D8D5A37B41D for ; Mon, 29 Apr 2002 12:36:52 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 29 Apr 2002 12:36:52 -0700 Received: from 62.5.36.29 by lw7fd.law7.hotmail.msn.com with HTTP; Mon, 29 Apr 2002 19:36:52 GMT X-Originating-IP: [62.5.36.29] Reply-To: mark.rowlands@minmail.net From: "mark rowlands" To: questions@freebsd.org Subject: focus in kde with remote X Date: Mon, 29 Apr 2002 21:36:52 +0200 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Apr 2002 19:36:52.0856 (UTC) FILETIME=[36ADBF80:01C1EFB5] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG running kmail (for example but it seems to apply to mdi gui apps) remotely over X ), when I open a new window, it appears behind the existing windows. Anyone any ideas as to why? _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:48:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from post.webmailer.de (natwar.webmailer.de [192.67.198.70]) by hub.freebsd.org (Postfix) with ESMTP id 44E7537B400 for ; Mon, 29 Apr 2002 12:48:43 -0700 (PDT) Received: from hume (stu1ir200-103-239.ras.tesion.net [195.226.103.239] (may be forged)) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id VAA12866; Mon, 29 Apr 2002 21:48:32 +0200 (MEST) Received: from lutz by hume with local (Exim 3.35 #1 (Debian)) id 172H5v-0001lf-00; Mon, 29 Apr 2002 21:45:55 +0200 Date: Mon, 29 Apr 2002 21:45:55 +0200 From: Lutz Horn To: Mark Rowlands Cc: freebsd-questions@freebsd.org Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020429194554.GA6406@lutz-horn.de> References: <20020427134911.GA2993@lutz-horn.de> <20020427185238.D296@fishballoon.dyndns.org> <20020428103959.GA2782@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="LQksG6bCIzRHxTLp" Content-Disposition: inline In-Reply-To: <200204291401.03502.mark.rowlands@minmail.net> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --LQksG6bCIzRHxTLp Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Mark and the others, thanks for your time and effort but I'm still not there. * Mark Rowlands [20020429 14:01 +0200]: > and see what irqs are being reported as in use OK, as you guessed irq 3 is in use by sio1. In fact the following irqs are in use: 1 atkbd0 3 sio1 4 sio0 6 fdc0 7 ppc0 11 pcic0, pcic1, uhci0 (why this?) 12 psm0 14 ata0 > try the following pccardd.conf assuming irq 3 is not in use by > something else.... like sio1: for example..... > > # pccardd.conf > > io 0x240-0x360 > > irq 3 > > # Available memory slots > memory 0xd4000 96k > > # Xircom CreditCard Ethernet CE3-10/100 > card "Xircom" "CreditCard 10/100" > config auto "xe" ? > insert /etc/pccard_ether $device start > remove /etc/pccard_ether $device stop If I use pccardc to dump information about the card I get a list of irqs the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the intersection {i|i is irq not in use} ^ {j|j is irq card likes} =3D {2, 5, 9, 10, 15} in the irq line in /etc/pccard.conf. Starting pccardd with this configurations still fails :-( With debuglevel set to 4 I get the following output from pccardd: 1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100") [CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)] [(null)]=20 2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card addr 0x0, flags 0x41=20 3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16=20 4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to 0x41, Reset time =3D 50 ms=20 5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240, size 0x10 flags 0x7=20 6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem 0xd4000, 4096 bytes, irq 11, flags 0=20 7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for Xircom(CreditCard 10/100): Device not configured 8 Apr 29 21:31:48 pccardd[148]: pccardd started What puzzles me is that in line 6 the correct device "xe0" and the correct io range "0x240-24f" are reported. But the irq is reported as "11" which is a) already in use and b) not in the list of irqs in /etc/pccard.conf. Any ideas? Regards Lutz --=20 Lutz Horn | GnuPG: 1024D/6EBDA359 1999-09-20 438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359 --LQksG6bCIzRHxTLp Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE8zaLyzQ+com69o1kRAuadAKCZ+frv9yRLBqdKOhEGRb4hnEwu6gCgiQVK GsArJbIGkkCD537Ira684+w= =JJ1X -----END PGP SIGNATURE----- --LQksG6bCIzRHxTLp-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:55:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 4285D37B416 for ; Mon, 29 Apr 2002 12:55:23 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TJt9U26174; Mon, 29 Apr 2002 15:55:09 -0400 Message-ID: <3CCDA654.2050805@potentialtech.com> Date: Mon, 29 Apr 2002 16:00:20 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: sroberts84@hotmail.com Cc: freebsd-questions@FreeBSd.org Subject: Re: I'm subscribed, so why aren't my questions being posted? References: <1020103791.307.10.camel@Demon.Strobe.org> <3CCD948C.4030807@potentialtech.com> <1020106066.307.28.camel@Demon.Strobe.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Stacey Roberts wrote: > Hi Bill, > Thanks for the response. > > I've not gotten anything from either the mailing list to say that my > e-mail was rejected, nor from my ISP's mail server indicating that there > was a problem sending the mail. > > I would say here though, that as much as I'm heartened by the fact that > there are replies to my posting today, I still haven't actually received > the *original* posting I sent to the list sent to me - which has always > been a sign that it actually got to the list. Or., has the situation > changed? That's pretty weird. Best guess I've got at this point: are you _sure_ you're subscribed to freebsd-questions? Try unsubscribing and resubscribing and see what happens. Do you use Evolution for all mail? and does it maybe have rules that would prevent it from displaying emails from yourself? I'm guessing, mainly because I can't imagine what's wrong. > On Mon, 2002-04-29 at 20:44, Bill Moran wrote: > >>Stacey Roberts wrote: >> >>>Hello There, >>> This is a last resort for me. >>> >>>I've noticed that I no longer see my questions being posted to this >>>list. >>> >>>I know that I'm still subscribed, as I still receive e-mail containing >>>the postings of other list subscribers. So what is it that has changed >>>over the last two months? >>> >>>I'm trying really hard to understand what has gone wrong, but I am as >>>yet unaware of anything done on my system that is causing this. I know >>>that my mail works as I've (in testing) cc'd myself on a few of last >>>questions just to see if it gets delivered - and they have indeed been >>>delivered. >>> >>Some more detail would be nice. Do you get bounce messages? Perhaps >>your ISP changed their SMTP server config and broke the reverse DNS. >>The mailing lists will reject an SMTP server with no reverse DNS. >> >>If your emails are simply disappearing into the Ether, then good luck >>figuring it out. That shouldn't really happen, if the message can't >>be delivered, you should get a bounce message. Again, your ISP may >>have broken something in their SMTP config. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 12:56:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from humpty.finadmin.virginia.edu (humpty.finadmin.Virginia.EDU [128.143.87.245]) by hub.freebsd.org (Postfix) with ESMTP id D4D0A37B400 for ; Mon, 29 Apr 2002 12:56:19 -0700 (PDT) Received: (from mrg8n@localhost) by humpty.finadmin.virginia.edu (8.11.6/8.11.6) id g3TJuI245892; Mon, 29 Apr 2002 15:56:18 -0400 (EDT) (envelope-from mrg8n@virginia.edu) X-Authentication-Warning: humpty.finadmin.virginia.edu: mrg8n set sender to mrg8n@virginia.edu using -f Date: Mon, 29 Apr 2002 15:56:18 -0400 From: Mike Galvez To: "Christopher J. Umina" Cc: questions@FreeBSD.ORG Subject: Re: Cron can't exec /bin/sh Message-ID: <20020429155618.C44973@mail.virginia.edu> References: <00af01c1efcd$32f78160$0301a8c0@uminafamily.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <00af01c1efcd$32f78160$0301a8c0@uminafamily.com>; from FJU@Fritzilldo.com on Mon, Apr 29, 2002 at 03:28:33PM -0700 X-Operating-System: FreeBSD UNIX Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 03:28:33PM -0700, Christopher J. Umina wrote: > hihi, > > Why can't cron exec /bin/sh? I got this e-mail as root..: > > cron: execl: couldn't exec `/bin/sh': Permission denied > > This is my crontab file: > > 0 0 * * 0 cvsup supfile Try using the full path to cvsup i.e.: /usr/local/bin/cvsup 00 15 * * 1-5 /usr/local/bin/cvsup supfile > > This is my supfile: > > *default tag=. > *default host=cvsup.freebsd.org > *default prefix=/usr > *default base=/usr/local/etc/cvsup > *default release=cvs delete use-rel-suffix compress > > ports-all > > Anybody see a problem? > > - Christopher J. Umina > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Michael Galvez Information Technology Specialist III E-Mail: mrg8n@nospam.virginia.edu University of Virginia Office: 434-982-2975 To the systems programmer, users and applications serve only to provide a test load. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:18:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web1.mastery.ca (ns1.mastery.ca [207.54.105.70]) by hub.freebsd.org (Postfix) with ESMTP id 5B50637B41D for ; Mon, 29 Apr 2002 13:18:40 -0700 (PDT) Received: from 78ftvrr (78ftvrr [10.0.1.100] (may be forged)) (authenticated (0 bits)) by web1.mastery.ca (8.12.3/8.11.1) with ESMTP id g3TKISmo001247 for ; Mon, 29 Apr 2002 16:18:29 -0400 (EDT) (envelope-from ryan@masse.biz) Message-ID: <003a01c1efbb$0c787bf0$6401000a@78ftvrr> From: "Ryan Masse" To: "FreeBSD-Questions" Subject: Secondary MX relay using Sendmail Date: Mon, 29 Apr 2002 16:18:37 -0400 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've been sifting through the mailing list database trying to find answers to my question below with not too much luck. As it stands all the dns records for the domains hosted on web1 have a listing for mx1 and mx2. As i found out last night when MX1 went down all mail traffic was rerouted to MX2 for queue (which is a good thing). What i noticed is that emails now being sent to MX2 were being returned with an error stating that the user for domain1 does not exist (bad thing). I was under the assumption that if i were to compile sendmail with 'mailertable' support and include in /etc/mail/mailertable: domain1.com smtp:[MX1] domain2.com smtp:[MX1] ... it would queue all mail while MX1 is down and relay all mail when MX1 is up. No? can someone please help me out? Thanks, Ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:19:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 34AF937B404 for ; Mon, 29 Apr 2002 13:19:13 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172Hc8-000085-00 for questions@freebsd.org; Mon, 29 Apr 2002 13:19:12 -0700 Message-ID: <014f01c1efd4$697eafe0$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: C-Client Date: Mon, 29 Apr 2002 16:20:11 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How do I find out the c-client install prefix? I need it for PHP4. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:23:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id 2F22E37B41A for ; Mon, 29 Apr 2002 13:23:13 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 224447.111784.1020.0s5306856sheridan ; Mon, 29 Apr 2002 22:23:04 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Lutz Horn Subject: Re: Xircom CreditCard 10/100 Configuration Date: Mon, 29 Apr 2002 22:23:10 +0200 X-Mailer: KMail [version 1.4] Cc: freebsd-questions@FreeBSD.ORG References: <20020427134911.GA2993@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net> <20020429194554.GA6406@lutz-horn.de> In-Reply-To: <20020429194554.GA6406@lutz-horn.de> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204292223.10553.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 9:45 pm, Lutz Horn wrote: > Hi Mark and the others, > > thanks for your time and effort but I'm still not there. > > * Mark Rowlands [20020429 14:01 +0200]: > > and see what irqs are being reported as in use > > OK, as you guessed irq 3 is in use by sio1. In fact the following irqs > are in use: > > 1 atkbd0 > 3 sio1 > 4 sio0 > 6 fdc0 > 7 ppc0 > 11 pcic0, pcic1, uhci0 (why this?) > 12 psm0 > 14 ata0 > > > try the following pccardd.conf assuming irq 3 is not in use by > > something else.... like sio1: for example..... > > > > # pccardd.conf > > > > io 0x240-0x360 > > > > irq 3 > > > > # Available memory slots > > memory 0xd4000 96k > > > > # Xircom CreditCard Ethernet CE3-10/100 > > card "Xircom" "CreditCard 10/100" > > config auto "xe" ? > > insert /etc/pccard_ether $device start > > remove /etc/pccard_ether $device stop > > If I use pccardc to dump information about the card I get a list of irq= s > the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the > intersection > > {i|i is irq not in use} ^ {j|j is irq card likes} =3D {2, 5, 9, 10, 1= 5} > > in the irq line in /etc/pccard.conf. Starting pccardd with this > configurations still fails :-( With debuglevel set to 4 I get the > following output from pccardd: > > 1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100") > [CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(nu= ll)] > [(null)] > 2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, c= ard > addr 0x0, flags 0x41 > 3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16 > 4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to > 0x41, Reset time =3D 50 ms > 5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240, > size 0x10 flags 0x7 > 6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem > 0xd4000, 4096 bytes, irq 11, flags 0 > 7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for > Xircom(CreditCard 10/100): Device not configured > 8 Apr 29 21:31:48 pccardd[148]: pccardd started > > What puzzles me is that in line 6 the correct device "xe0" and the > correct io range "0x240-24f" are reported. But the irq is reported as > "11" which is a) already in use and b) not in the list of irqs in > /etc/pccard.conf. > > Any ideas? sorry to be picky but did you try with a pccardd.conf containing "only" t= he=20 entry for the xircom? more things to try.... again once again we are in wild shot in dark=20 territory... (I have a cem-56 which took a while to persuade to work.) add to /etc/sysctl.conf=20 machdep.pccard.mem_start=3D0xd0000 /etc/rc.conf pccard_mem=3D"0xd0000" and if that don't work 0xd4000 or 0xd8000 and if that dont work ...... :-( > Regards > Lutz To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:26:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fed1mtao04.cox.net (fed1mtao04.cox.net [68.6.19.241]) by hub.freebsd.org (Postfix) with ESMTP id 5563437B404 for ; Mon, 29 Apr 2002 13:26:05 -0700 (PDT) Received: from CX907019A ([68.0.150.184]) by fed1mtao04.cox.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020429202605.TTXQ1366.fed1mtao04.cox.net@CX907019A>; Mon, 29 Apr 2002 16:26:05 -0400 From: "Blane R. Boynton" To: "Lutz Horn" Cc: "FreeBSD Questions" Subject: RE: Xircom CreditCard 10/100 Configuration Date: Mon, 29 Apr 2002 13:24:50 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <20020429194554.GA6406@lutz-horn.de> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Lutz, I am having a very similar problem with my NetGear FA410TX. No matter what I do, the card configures with an IRQ of 3, regardless of what I say in pccard.conf, it even configs to IRQ 3 when I use pccardc enabler. It seems the consensus is to try and use the fa_select utility to try and configure the card. I will try that this afternoon and post my results. If anyone else has any other suggestions forward them along -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Lutz Horn Sent: Monday, April 29, 2002 12:46 To: Mark Rowlands Cc: freebsd-questions@freebsd.org Subject: Re: Xircom CreditCard 10/100 Configuration Hi Mark and the others, thanks for your time and effort but I'm still not there. * Mark Rowlands [20020429 14:01 +0200]: > and see what irqs are being reported as in use OK, as you guessed irq 3 is in use by sio1. In fact the following irqs are in use: 1 atkbd0 3 sio1 4 sio0 6 fdc0 7 ppc0 11 pcic0, pcic1, uhci0 (why this?) 12 psm0 14 ata0 > try the following pccardd.conf assuming irq 3 is not in use by > something else.... like sio1: for example..... > > # pccardd.conf > > io 0x240-0x360 > > irq 3 > > # Available memory slots > memory 0xd4000 96k > > # Xircom CreditCard Ethernet CE3-10/100 > card "Xircom" "CreditCard 10/100" > config auto "xe" ? > insert /etc/pccard_ether $device start > remove /etc/pccard_ether $device stop If I use pccardc to dump information about the card I get a list of irqs the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the intersection {i|i is irq not in use} ^ {j|j is irq card likes} = {2, 5, 9, 10, 15} in the irq line in /etc/pccard.conf. Starting pccardd with this configurations still fails :-( With debuglevel set to 4 I get the following output from pccardd: 1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100") [CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)] [(null)] 2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card addr 0x0, flags 0x41 3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16 4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to 0x41, Reset time = 50 ms 5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240, size 0x10 flags 0x7 6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem 0xd4000, 4096 bytes, irq 11, flags 0 7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for Xircom(CreditCard 10/100): Device not configured 8 Apr 29 21:31:48 pccardd[148]: pccardd started What puzzles me is that in line 6 the correct device "xe0" and the correct io range "0x240-24f" are reported. But the irq is reported as "11" which is a) already in use and b) not in the list of irqs in /etc/pccard.conf. Any ideas? Regards Lutz -- Lutz Horn | GnuPG: 1024D/6EBDA359 1999-09-20 438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:26:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.prodigy.net.mx (dfproxy02.prodigy.net.mx [148.235.168.57]) by hub.freebsd.org (Postfix) with ESMTP id D880E37B400 for ; Mon, 29 Apr 2002 13:26:29 -0700 (PDT) Received: from hrm (du-200-67-136-178.prodigy.net.mx [200.67.136.178]) by SMTP.Prodigy.Net.mx (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVC000S9IC1BN@SMTP.Prodigy.Net.mx>; Mon, 29 Apr 2002 15:02:25 -0500 (CDT) Date: Mon, 29 Apr 2002 15:01:41 -0500 From: 00462708@academ01.cem.itesm.mx Subject: Re: I'm subscribed, so why aren't my questions being posted? To: freebsd-questions@FreeBSd.org Reply-To: 00462708@academ01.cem.itesm.mx Message-id: <000c01c1efb8$ae565940$0200a8c0@prodigy.net.mx> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 X-Mailer: Microsoft Outlook Express 5.00.2919.6600 Content-type: text/plain; charset="iso-8859-1" Content-transfer-encoding: 7bit X-Priority: 3 X-MSMail-priority: Normal References: <1020103791.307.10.camel@Demon.Strobe.org> <3CCD948C.4030807@potentialtech.com> <1020106066.307.28.camel@Demon.Strobe.org> <3CCDA654.2050805@potentialtech.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This have ALWAYS happened to me, since 1998 or something that was the first time I subscribed and yes, im subscribed alright and everything heh. Greetings, Demv To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:28:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 9834B37B405 for ; Mon, 29 Apr 2002 13:28:45 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g3TKYHC05422; Mon, 29 Apr 2002 13:34:23 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Mon, 29 Apr 2002 13:34:17 -0700 From: Nathan KInkade To: Anton Shcherbinin Cc: freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it? Message-Id: <20020429133417.1964fb3b.nkinkade@dsl-only.com> In-Reply-To: <1411696390.20020428231738@fastmail.fm> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002 23:17:38 +0400 Anton Shcherbinin wrote: > Sunday, April 28, 2002, 5:15:39, Greg 'groggy' Lehey wrote: > > > On Saturday, 27 April 2002 at 16:32:28 -0400, Joe & Fhe Barbish wrote: > >> On Saturday, April 27, 2002 1:36 PM, Anton Shcherbinin wrote: > >>> > >>> I installed FreeBSD 4.5 Release. When my host is trying to connect to > >>> any other host specified by name, I experience a huge (1.5 minutes) > >>> delay before the hosts are connected. For example, suppose I want to get > >>> http://yahoo.com/ page. I write: > >>> > >>> $ telnet yahoo.com 80 > >>> > >>> At the same time (actually, a bit earlier), I wrote at another console > >>> as root: > >>> > >>> # tcpdump -n > >>> > >>> And here is tcpdump's output (a bit edited for clarity): > >>> > >>> 18:37:51.501962 my_host.1055 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:37:56.512212 my_host.1056 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:06.522353 my_host.1057 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:26.532655 my_host.1058 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:39:06.543281 my_host.1059 > our_DNS_server.53: 4487+ A? yahoo.com. (27) > >>> 18:39:06.683069 our_DNS_server.53 > my_host.1059: 4487* 2/5/5 A 66.218.71.113, (238) > >>> 18:39:06.683609 my_host.1028 > yahoo.com.80: S 2162865409:2162865409(0) win 65535 (DF) [tos 0x10] > >>> 18:39:06.909922 yahoo.com.80 > my_host.1028: S 2552035614:2552035614(0) ack 2162865410 win 65535 > >>> 18:39:06.909984 my_host.1028 > yahoo.com.80: . ack 1 win 33304 (DF) [tos 0x10] > >>> > >>> That is, my host tries to resolve yahoo.com at our DNS server, *but* it > >>> looks for 'AAAA' RR, and not 'A'. It gets no reply, and in 5 seconds it > >>> retries the query (again, 'AAAA' RR). No reply again, it retries in 10 > >>> seconds, then again in 20 seconds. No reply within 40 seconds. > >>> *FINALLY*, my host asks DNS server for 'A' RR for yahoo.com . And no > >>> wonder that in several milliseconds DNS server tells my host yahoo.com's > >>> IP address. Then, within several milliseconds, my host and yahoo.com > >>> become TCP-connected. > >>> > >>> As you can see, I had to waste 5+10+20+40==75 seconds watching my host > >>> try to find nonexistent AAAA resource record. And things are the same if > >>> I try to send mail or to connect to ftp site or whatever else. > >>> > >>> What have I done wrong? What should I do? Thanks a lot for any ideas. > >>> > >>> I general, what are AAAA records? RFC1034/1035 say nothing about > >>> such RR. What TFM should I read about them? > > > They're address records for IPV6. > > Thank you, Greg. It makes things much clearer. > > > So what's the problem? I really don't know. Does this only happen > > with telnet? Only with yahoo.com? > > As I have already said, the same happens with any application and any > host. E. g., with ftp and ftp.freebsd.org : > 1) my host queries our DNS server for AAAA record of ftp.freebsd.org > 2) query times out in 5 secs > 3) the same query > 4) query times out in 10 secs > 5) the same query > 6) query times out in 20 secs > 7) the same query > 8) query times out in 40 secs > 9) the same query, *but* for A record; DNS server replies in some ms, > and then everything goes great, my host quickly connects > to ftp.freebsd.org:21 etc. > > How can I fix that? > > The only thing I could think of is to disable IPv6 at all. But wait a > second: > > $ grep -i ipv6_enable /etc/rc* /etc/defaults/* > /etc/rc:case ${ipv6_enable} in > /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. > > ^^^^^^^^^^^^^^^^ > Does not it mean that IPv6 is already disabled? > > On the other hand: > $ ifconfig -u > rl0: flags=8843 mtu 1500 > inet 10.10.10.9 netmask 0xffffff00 broadcast 10.10.10.255 > inet6 fe80::2c0:26ff:fea5:b640%rl0 prefixlen 64 scopeid 0x1 > ether 00:c0:26:a5:b6:40 > media: Ethernet autoselect (100baseTX ) > status: active > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > > Both interfaces have IPv6 (inet6) addresses. > > I deal with IPv6 the 1st time in my life. I just understand nothing. > :-( > What should I do? I am ready to give you any additional info about my > FBSD configuration. Many thanks in advance. since it hasn't been put out yet, might it work to remove IPV6 from the kernel altogether by commenting out the follwing line in your kernel config file and then recompiling the kernel? I'm running 4.5-stable from releng_4_5 and I've had that line commented out for a month or two now and haven't seemed to have any problems. then again, i never really had any problems when it was there in the first place so this point may be irrelevant? options INET6 #IPv6 communications protocols To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:30:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta03-svc.ntlworld.com (mta03-svc.ntlworld.com [62.253.162.43]) by hub.freebsd.org (Postfix) with ESMTP id 2CA1037B404 for ; Mon, 29 Apr 2002 13:30:40 -0700 (PDT) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta03-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020429203038.FBRC295.mta03-svc.ntlworld.com@lungfish.ntlworld.com>; Mon, 29 Apr 2002 21:30:38 +0100 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.6) with ESMTP id g3TKUbV99818; Mon, 29 Apr 2002 21:30:37 +0100 (BST) (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g3TKUb203325; Mon, 29 Apr 2002 21:30:37 +0100 (BST) (envelope-from scott) Date: Mon, 29 Apr 2002 21:30:37 +0100 From: Scott Mitchell To: Mark Rowlands Cc: Axel Scheepers , Lutz Horn , freebsd-questions@FreeBSD.ORG Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020429213037.A324@fishballoon.dyndns.org> References: <20020427134911.GA2993@lutz-horn.de> <20020428103959.GA2782@lutz-horn.de> <20020429141739.G61218@mars.thuis> <200204291515.18664.mark.rowlands@minmail.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200204291515.18664.mark.rowlands@minmail.net>; from mark.rowlands@minmail.net on Mon, Apr 29, 2002 at 03:15:18PM +0200 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 03:15:18PM +0200, Mark Rowlands wrote: > I have a xircom cem56 10/100 ethernet/modem combo and the network bit works > fine. The problem is I can't get both working and the same time, oth if I > ever have to go back to using modems I think I will kill myself....... Indeed -- all the CE3-based cards (the PCMCIA 10/100 Ethernet models, with or without modems, RealPort or otherwise) should work fine. There are several problems with the older CE2 hardware (including the CEM28 and CEM33). I put out some patches on freebsd-mobile late last year that were supposed to fix some of these... if you've got one of these cards then please try them out and let me know if they do any good -- I only have CE3 cards to test on so I have no idea if the CE2 stuff works until people complain about it :-) Of course none of this helps Mr. Horn's non-working CE3, although that looks like a pccardd rather than if_xe issue. Lutz, have you tried changing the machdep.pccard.pcic_irq sysctl variable (man loader for details). You have to set this at boot time; no guarantees, but it might have some effect on your problem. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:35:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from glow.binity.net (glow.binity.net [213.84.201.224]) by hub.freebsd.org (Postfix) with ESMTP id 260EF37B404 for ; Mon, 29 Apr 2002 13:35:40 -0700 (PDT) Received: from vscan (glow.dt1.binity.net [172.23.18.1]) by glow.binity.net (Postfix) with ESMTP id D887E55D5; Mon, 29 Apr 2002 22:35:35 +0200 (CEST) Received: from silver.dt1.binity.net (silver.dt1.binity.net [172.23.3.20]) by glow.binity.net (Postfix) with ESMTP id 2869154CF; Mon, 29 Apr 2002 22:35:34 +0200 (CEST) Date: Mon, 29 Apr 2002 22:35:43 +0200 From: Walter Hop X-Mailer: The Bat! (v1.53d) Educational X-Priority: 3 (Normal) Message-ID: <791490753.20020429223543@binity.com> To: "Christopher J. Umina" Cc: questions@freebsd.org Subject: Re: C-Client In-Reply-To: <014f01c1efd4$697eafe0$0301a8c0@uminafamily.com> References: <014f01c1efd4$697eafe0$0301a8c0@uminafamily.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: by glow.binity.net (amavis-perl-11-sky2) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [in reply to FJU@Fritzilldo.com, 30-04-2002] > How do I find out the c-client install prefix? I need it for PHP4. If you installed c-client from ports, it's /usr/local. Otherwise do a "locate c-client" and see where your libraries are. -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:39:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.clifftop.net (machassociates-6.dsl.easynet.co.uk [217.204.162.182]) by hub.freebsd.org (Postfix) with ESMTP id 17A1037B416 for ; Mon, 29 Apr 2002 13:39:40 -0700 (PDT) Received: from Gandalf (gandalf.shire.com [192.168.1.5]) (authenticated bits=0) by smtp.clifftop.net (8.12.3/8.12.3) with ESMTP id g3TKcJ2x065621; Mon, 29 Apr 2002 21:38:19 +0100 (BST) From: "Danny Horne" To: "Ryan Masse" , "FreeBSD-Questions" Subject: RE: Secondary MX relay using Sendmail Date: Mon, 29 Apr 2002 21:38:19 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <003a01c1efbb$0c787bf0$6401000a@78ftvrr> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ryan Masse > Sent: Monday 29 April 2002 9:19pm > To: FreeBSD-Questions > Subject: Secondary MX relay using Sendmail > > I was under the assumption that if i were to compile sendmail with > 'mailertable' support and include in /etc/mail/mailertable: > > domain1.com smtp:[MX1] > domain2.com smtp:[MX1] > ... > > it would queue all mail while MX1 is down and relay all mail when > MX1 is up. > No? can someone please help me out? > You don't say what version of Sendmail you're running, but on late versions you just need - To:domain1.com RELAY in /etc/mail/access. Don't forget to rebuild it with makemap. I've never used mailertable so wouldn't know how to do the same thing with that. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.351 / Virus Database: 197 - Release Date: 19/04/2002 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:41:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.vbcomm.net (climax.vbcomm.net [208.178.120.12]) by hub.freebsd.org (Postfix) with ESMTP id AC3B237B405 for ; Mon, 29 Apr 2002 13:41:39 -0700 (PDT) X-Real-Return-Path: filipak@earthlink.net Received: from earthlink.net ([208.178.123.64]) by mail.vbcomm.net (8.9.3/8.8.7) with ESMTP id QAA01994; Mon, 29 Apr 2002 16:31:11 -0400 Message-ID: <3CCDB001.55959F52@earthlink.net> Date: Mon, 29 Apr 2002 16:41:37 -0400 From: Mark Filipak X-Mailer: Mozilla 4.77 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: "Blane R. Boynton" Cc: Lutz Horn , FreeBSD Questions Subject: Disable Plug-n-play BIOS? (Was: Xircom CreditCard 10/100 Configuration) References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "Blane R. Boynton" wrote: > > Lutz, > > I am having a very similar problem with my NetGear FA410TX. No matter > what I do, the card configures with an IRQ of 3, regardless of what I > say in pccard.conf, it even configs to IRQ 3 when I use pccardc enabler. > It seems the consensus is to try and use the fa_select utility to try > and configure the card. I will try that this afternoon and post my > results. If anyone else has any other suggestions forward them along I'm a newbie and I'm am also having trouble. I remember reading somewhere that the Plug-n-play BIOS feature should be turned *off*. I just checked the Handbook and it appears to be silent on the issue. What is correct? Should the Plug-n-play BIOS setting be turned off? Thanks -- Mark > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Lutz Horn > Sent: Monday, April 29, 2002 12:46 > To: Mark Rowlands > Cc: freebsd-questions@freebsd.org > Subject: Re: Xircom CreditCard 10/100 Configuration > > Hi Mark and the others, > > thanks for your time and effort but I'm still not there. > > * Mark Rowlands [20020429 14:01 +0200]: > > and see what irqs are being reported as in use > > OK, as you guessed irq 3 is in use by sio1. In fact the following irqs > are in use: > > 1 atkbd0 > 3 sio1 > 4 sio0 > 6 fdc0 > 7 ppc0 > 11 pcic0, pcic1, uhci0 (why this?) > 12 psm0 > 14 ata0 > > > try the following pccardd.conf assuming irq 3 is not in use by > > something else.... like sio1: for example..... > > > > # pccardd.conf > > > > io 0x240-0x360 > > > > irq 3 > > > > # Available memory slots > > memory 0xd4000 96k > > > > # Xircom CreditCard Ethernet CE3-10/100 > > card "Xircom" "CreditCard 10/100" > > config auto "xe" ? > > insert /etc/pccard_ether $device start > > remove /etc/pccard_ether $device stop > > If I use pccardc to dump information about the card I get a list of irqs > the card seems to be willing to use: 2 3 4 5 7 9 10 11 15. So I put the > intersection > > {i|i is irq not in use} ^ {j|j is irq card likes} = {2, 5, 9, 10, 15} > > in the irq line in /etc/pccard.conf. Starting pccardd with this > configurations still fails :-( With debuglevel set to 4 I get the > following output from pccardd: > > 1 Apr 29 21:31:43 pccardd[148]: Card "Xircom"("CreditCard 10/100") > [CE3-10/100] [1.00] matched "Xircom" ("CreditCard 10/100") [(null)] > [(null)] > 2 Apr 29 21:31:43 pccardd[148]: Using mem addr 0xd4000, size 4096, card > addr 0x0, flags 0x41 > 3 Apr 29 21:31:43 pccardd[148]: Using I/O addr 0x240, size 16 > 4 Apr 29 21:31:43 pccardd[148]: Setting config reg at offs 0x800 to > 0x41, Reset time = 50 ms > 5 Apr 29 21:31:48 pccardd[148]: Assigning I/O window 0, start 0x240, > size 0x10 flags 0x7 > 6 Apr 29 21:31:48 pccardd[148]: Assign xe0, io 0x240-0x24f, mem > 0xd4000, 4096 bytes, irq 11, flags 0 > 7 Apr 29 21:31:48 pccardd[148]: driver allocation failed for > Xircom(CreditCard 10/100): Device not configured > 8 Apr 29 21:31:48 pccardd[148]: pccardd started > > What puzzles me is that in line 6 the correct device "xe0" and the > correct io range "0x240-24f" are reported. But the irq is reported as > "11" which is a) already in use and b) not in the list of irqs in > /etc/pccard.conf. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:55:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from comp104.hrpc.uic.edu (comp104.hrpc.uic.edu [128.248.230.104]) by hub.freebsd.org (Postfix) with SMTP id 264D037B422 for ; Mon, 29 Apr 2002 13:55:28 -0700 (PDT) Received: (qmail 62294 invoked by uid 1000); 29 Apr 2002 20:55:24 -0000 Date: Mon, 29 Apr 2002 15:55:24 -0500 From: Lucas Bergman To: mbailey@jam.rr.com Cc: questions@FreeBSD.ORG Subject: Re: [subjectless] Message-ID: <20020429155524.C51197@comp104.hrpc.uic.edu> Reply-To: lucas@slb.to References: <000901c1efad$6f7984a0$4101a8c0@roadrunner1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <000901c1efad$6f7984a0$4101a8c0@roadrunner1>; from chris1@jam.rr.com on Mon, Apr 29, 2002 at 01:41:06PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I have bought a copy of freebds ver.4.4 - When trying to install it > I get a screen that says my version must be 2.1 or earlier because > my computer can't read the CD ver. This doesn't look like an error message at all. Please don't paraphrase; your summary of events is insufficient (for me, at least) to determine what went wrong. Think of it this way: If I told you that ``my car can't drive me to work,'' does that give you any idea at all of what's actually wrong? Please write the list again with the *exact* text that you saw and *exactly* what you were doing when it appeared. > My e-mail is mbailey@jam.rr.com Then why doesn't that address appear in the `from' and/or `reply-to' header fields? Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:56:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from utility.clubscholarship.com (utility.clubscholarship.com [198.78.70.175]) by hub.freebsd.org (Postfix) with ESMTP id B1EE037B4B0 for ; Mon, 29 Apr 2002 13:55:44 -0700 (PDT) Received: from localhost (root@localhost) by utility.clubscholarship.com (8.11.6/8.11.6) with ESMTP id g3TKrR466424 for ; Mon, 29 Apr 2002 13:53:27 -0700 (PDT) (envelope-from root@utility.clubscholarship.com) Date: Mon, 29 Apr 2002 13:53:27 -0700 (PDT) From: Patrick Thomas To: Subject: detecting cache amount on xeon processors Message-ID: <20020429135206.L29785-100000@utility.clubscholarship.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there any way, from my FreeBS userland, to detect how much cache my xeon processors have ? I accidently deleted my /var/run/dmesg.boot, and the machine has been up so long that the output of the `dmesg` command no longer contains the boot info. thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 13:57:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c001.snv.cp.net (c001-h008.c001.snv.cp.net [209.228.32.122]) by hub.freebsd.org (Postfix) with SMTP id 2390B37B404 for ; Mon, 29 Apr 2002 13:56:57 -0700 (PDT) Received: (cpmta 21292 invoked from network); 29 Apr 2002 13:56:56 -0700 Received: from 209.228.32.124 (HELO mail.atkinshome.com.criticalpath.net) by smtp.register-admin.com (209.228.32.122) with SMTP; 29 Apr 2002 13:56:56 -0700 X-Sent: 29 Apr 2002 20:56:56 GMT Received: from [64.75.4.241] by mail.atkinshome.com with HTTP; Mon, 29 Apr 2002 13:56:49 -0700 (PDT) Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 To: wmoran@potentialtech.com Cc: freebsd-questions@FreeBSD.ORG From: dave@atkinshome.com Subject: Re: samba/inetd - netbios-ns/udp: bind: Address already in use error messages X-Sent-From: dave@atkinshome.com Date: Mon, 29 Apr 2002 13:56:49 -0700 (PDT) X-Mailer: Web Mail 5.0.8-8 Message-Id: <20020429135656.16198.h010.c001.wm@mail.atkinshome.com.criticalpath.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 29 April 2002, Bill Moran wrote > Have you checked /usr/local/etc/rc.d for a startup script? there is no /usr/local/etc. I checked /etc/rc.conf and /etc/defaults/rc.conf. Are there any other startup locations to check? > Can you run sockstat to verify whether an smbd is listening for connections > when nobody is connecting? If so, smbd has started in daemon mode, probably > from /usr/local/etc/rc.d note: 192.168.1.98 is the local address of the server, crwebx2. Other service running is "webx" = WebCrossing message board server. crwebx2# sockstat USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS root webx-go 40755 20 tcp4 192.168.1.98:80 *:* root webx-go 40755 24 udp4 *:2458 *:* root webx-go 40755 25 udp4 *:2311 *:* root webx-go 40755 26 udp4 *:1038 *:* root webx-go 40755 27 udp4 *:2459 *:* root webx-go 40755 28 udp4 *:2585 *:* root webx-go 40755 29 udp4 *:2588 *:* root webx-go 40755 30 tcp4 192.168.1.98:80 172.175.62.233:2431 root webx-go 40755 32 udp4 *:2546 *:* root webx-go 40755 34 udp4 *:2284 *:* root webx-go 40755 35 tcp4 192.168.1.98:80 208.29.8.184:58570 root sshd 40733 4 tcp4 192.168.1.98:22 192.168.5.140:1246 root telnetd 40075 0 tcp4 192.168.1.98:23 192.168.1.252:4157 root telnetd 40075 1 tcp4 192.168.1.98:23 192.168.1.252:4157 root telnetd 40075 2 tcp4 192.168.1.98:23 192.168.1.252:4157 root nmbd 119 0 udp4 *:137 *:* root nmbd 119 1 udp4 *:137 *:* root nmbd 119 2 udp4 *:137 *:* root nmbd 119 6 udp4 *:138 *:* root nmbd 119 7 udp4 192.168.1.98:137 *:* root nmbd 119 8 udp4 192.168.1.98:138 *:* root sendmail 78 4 tcp4 *:25 *:* root sendmail 78 5 tcp4 *:587 *:* root sshd 74 3 tcp4 *:22 *:* root inetd 70 4 tcp4 *:21 *:* root inetd 70 5 tcp4 *:23 *:* root inetd 70 6 tcp4 *:139 *:* root inetd 70 7 udp4 *:137 *:* root syslogd 63 4 udp4 *:514 *:* USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS USER COMMAND PID FD PROTO ADDRESS root webx-go 40755 8 stream webx.socket root login 40076 3 dgram syslogd[63]:3 root sendmail 78 3 dgram syslogd[63]:3 root syslogd 63 3 dgram /var/run/log To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14: 6:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from bsd.alexe.org (slbch-4-m1-19.vnnyca.adelphia.net [24.55.79.19]) by hub.freebsd.org (Postfix) with ESMTP id CF7B637B419 for ; Mon, 29 Apr 2002 14:06:10 -0700 (PDT) Received: (from alex@localhost) by bsd.alexe.org (8.12.3/8.12.3) id g3TL9hLv011485 for freebsd-questions@freebsd.org; Mon, 29 Apr 2002 14:09:43 -0700 (PDT) (envelope-from alex) Date: Mon, 29 Apr 2002 14:09:43 -0700 From: Alex Obradovic To: freebsd-questions@freebsd.org Subject: kernel compile errors Message-ID: <20020429210943.GK7871@montenegro.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.27i X-Editor: Vim http://www.vim.org/ X-Info: http://www.alexe.org X-Operating-System: FreeBSD/4.5-STABLE (i386) X-Uptime: 2:07PM up 5:36, 7 users, load averages: 0.05, 0.07, 0.06 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just tried to compile my kernel and I am getting the following error. Last good compiled kernel was on FreeBSD bsd.alexe.org 4.5-STABLE FreeBSD 4.5-STABLE #0: Thu Apr 25 00:10:40 PDT 2002 alex@bsd.alexe.org:/usr/obj/usr/src/sys/FBSD4.5A i386 Compile Error: cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -I../../contrib/ipfilter -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../kern/kern_descrip.c ../../kern/kern_descrip.c: In function `fcntl': ../../kern/kern_descrip.c:239: `td' undeclared (first use in this function) ../../kern/kern_descrip.c:239: (Each undeclared identifier is reported only once ../../kern/kern_descrip.c:239: for each function it appears in.) *** Error code 1 Any ideas? Thanks! Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14: 9:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from comp104.hrpc.uic.edu (comp104.hrpc.uic.edu [128.248.230.104]) by hub.freebsd.org (Postfix) with SMTP id D369D37B405 for ; Mon, 29 Apr 2002 14:09:34 -0700 (PDT) Received: (qmail 63674 invoked by uid 1000); 29 Apr 2002 21:09:32 -0000 Date: Mon, 29 Apr 2002 16:09:32 -0500 From: Lucas Bergman To: Daniel O'Connor Cc: questions@freebsd.org Subject: Re: Clock adjustment? Message-ID: <20020429160932.D51197@comp104.hrpc.uic.edu> Reply-To: lucas@slb.to References: <1020084497.10959.1.camel@chowder.dons.net.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i In-Reply-To: <1020084497.10959.1.camel@chowder.dons.net.au>; from doconnor@gsoft.com.au on Mon, Apr 29, 2002 at 10:18:15PM +0930 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG doconnor@gsoft.com.au wrote: > I can't really use ntp as the system isn't dialed up very frequently > (ie about an hour a day maximum) and I currently use ntpdate to > adjust the date at each dialup. Provided you're running on Pentium-like hardware, clockspeed was specifically designed to correct drifting clocks with little network input: /usr/ports/sysutils/clockspeed http://cr.yp.to/clockspeed.html Lucas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:20:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx1.thebiz.net (mx1.thebiz.net [216.238.0.21]) by hub.freebsd.org (Postfix) with SMTP id 4DB5E37B41E for ; Mon, 29 Apr 2002 14:20:41 -0700 (PDT) Received: (qmail 83982 invoked from network); 29 Apr 2002 17:20:40 -0400 Received: from unknown (172.16.0.181) by mx1.backend.thebiz.net with QMQP; 29 Apr 2002 17:20:40 -0400 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 29 Apr 2002 21:20:40 -0000 Date: Mon, 29 Apr 2002 17:20:40 -0400 (EDT) From: Brandon Poyner X-X-Sender: bpoyner@staff.noc.thebiz.net To: freebsd-questions@freebsd.org Subject: mountd, failover & stale filehandles Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have two servers running FreeBSD 4.5 that have identical content in the /export directories. The /export directories are locally mounted ffs. I'm attempting to have one server act as failover incase the other server goes away. The problem is that mountd generates different filehandles for the two /export directories, and as such the failover does not automatically occur. Is there any way to tell mount_nfs to give up on the old filehandle and get a new one through mountd? Or to get the two mountds to generate the same filehandle information every time? -- Brandon Poyner, Unix Systems Engineer brandon@veranet.net VeraNet Solutions, a BiznessOnline.com Company http://www.veranet.net/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:24: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id EC85C37B41D for ; Mon, 29 Apr 2002 14:24:01 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g3TLNba5086290; Mon, 29 Apr 2002 17:23:41 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: gnome terminal size From: Joe Marcus Clarke To: "Kirk R. Wythers" Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <1020089215.71337.9.camel@lorax.forestry.umn.edu> References: <1020089215.71337.9.camel@lorax.forestry.umn.edu> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 17:23:37 -0400 Message-Id: <1020115421.85996.10.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-04-29 at 11:06, Kirk R. Wythers wrote: > I just compiled the new gnome build (I wanted to take a look at it after > using kde for a long time). My question is this: > > How do you switch to a smaller terminal? The default terminal is rather > large. There is an option in kde to chose both terminal and font size. > Does something similar exist in gnome? You can change the font size in gnome-terminal, but the not the size of the terminal itself (unless of course, you drag the edges to shrink it). If you change the font to fixed 12-point, for example, the window does get much smaller. Joe > > Regards, > > Kirk > > -- > Kirk R. Wythers email: kwythers@umn.edu > University of Minnesota tel: 612.625.2261 > Department of Forest Resources fax: 612.625.5212 > Saint Paul, MN 55108 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:25:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 3DDB437B41B for ; Mon, 29 Apr 2002 14:25:17 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g3TLOia5086304; Mon, 29 Apr 2002 17:24:44 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: Galeon port build problems From: Joe Marcus Clarke To: stan Cc: Free BSD Questions list In-Reply-To: <20020429141659.GA4898@teddy.fas.com> References: <20020429141659.GA4898@teddy.fas.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 17:24:44 -0400 Message-Id: <1020115484.85996.12.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-04-29 at 11:16, stan wrote: > I'm having problems geting galeon built after this weekends > cvsup/portupgrade. > > Her's the tail end of the failure: Looks like you need to upgrade a few of your GNOME bits. For example, make sure gdk-pixbuf, gnomecanvas, and imlib are all at their respective latest versions. Joe > > > Script started on Mon Apr 29 10:12:58 2002 > brown# make install > ===> Building for galeon-1.2.1_1 > make all-recursive > Making all in intl > Making all in po > Making all in src > Making all in mozilla > c++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src -I/usr/X11R6/include/mozilla -I/usr/X11R6/include/mozilla/nspr -I/usr/X11R6/include/mozilla/appcomps -I/usr/X11R6/include/mozilla/content -I/usr/X11R6/include/mozilla/cookie -I/usr/X11R6/include/mozilla/docshell -I/usr/X11R6/include/mozilla/dom -I/usr/X11R6/include/mozilla/exthandler -I/usr/X11R6/include/mozilla/find -I/usr/X11R6/include/mozilla/gfx -I/usr/X11R6/include/mozilla/gtkembedmoz -I/usr/X11R6/include/mozilla/helperAppDlg -I/usr/X11R6/include/mozilla/java -I/usr/X11R6/include/mozilla/jsconsole -I/usr/X11R6/include/mozilla/layout -I/usr/X11R6/include/mozilla/mimetype -I/usr/X11R6/include/mozilla/mozxfer -I/usr/X11R6/include/mozilla/necko -I/usr/X11R6/include/mozilla/necko2 -I/usr/X11R6/include/mozilla/nkcache -I/usr/X11R6/include/mozilla/oji -I/usr/X11R6/include/mozilla/pref -I/usr/X11R6/include/mozilla/progressDlg -I/usr/X11R6/include/mozilla/string -I/usr/X11R6/include/mozilla/shistory -I/us! r/X11R6/include/mozilla/uconv -I/usr/X11R6/include/mozilla/uriloader -I/usr/X11R6/include/mozilla/wallet -I/usr/X11R6/include/mozilla/webbrowserpersist -I/usr/X11R6/include/mozilla/webbrwsr -I/usr/X11R6/include/mozilla/webshell -I/usr/X11R6/include/mozilla/widget -I/usr/X11R6/include/mozilla/windowwatcher -I/usr/X11R6/include/mozilla/xpcom -I/usr/X11R6/include/gconf/1 -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/local/include/orbit-1.0 -I/usr/local/include -I/usr/X11R6/include/gtk12 -I/usr/X11R6/include/gdk-pixbuf-1.0 -I/usr/X11R6/include/gtk12 -I/usr/local/include/glib12 -I/usr/local/include -I/usr/X11R6/include -I/usr/X11R6/include/gnome-vfs-1.0 -I/usr/X11R6/lib/gnome-vfs-1.0/include -I/usr/local/include/gnome-xml -I/usr/local/include/orbit-1.0 -I/usr/X11R6/include/gconf/1 -D_THREAD_SAFE -I/usr/X11R6/include/libglade-1.0 -I/usr/X11R6/include/gnome-1.0 -DNEED_GNOMESUPPORT_H -I/usr/X11R6/lib/gnome-libs/include -I/usr/local/include/freetype2 -DLIB_DIR=\! "/usr/X11R6/lib/galeon\" -DSHARE_DIR=\"/usr/X11R6/share/gnome/galeon\ " -I/usr/local/include -I/usr/X11R6/include -D_REENTRANT -D_THREAD_SAFE -fno-rtti -O -pipe -Wall -Wmissing-declarations -Wmissing-prototypes -Wsign-compare -Werror -c FilePicker.cpp > In file included from /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:29, > from FilePicker.cpp:51: > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:7: gdk_imlib.h: No such file or directory > In file included from /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:29, > from FilePicker.cpp:51: > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:46: syntax error before `*' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:51: syntax error before `*' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:56: `GdkImlibImage' was not declared in this scope > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:56: `im' was not declared in this scope > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:57: `GdkImlibImage' was not declared in this scope > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:57: `im' was not declared in this scope > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:58: syntax error before `,' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:58: initializer list being treated as compound expression > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:68: syntax error before `*' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:74: syntax error before `*' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:79: syntax error before `*' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-pixmap.h:81: syntax error before `*' > In file included from FilePicker.cpp:51: > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:228: syntax error before `;' > /usr/X11R6/include/gnome-1.0/libgnomeui/gnome-stock.h:238: syntax error before `;' > *** Error code 1 > > Stop in /usr/ports/www/galeon/work/galeon-1.2.1/src/mozilla. > *** Error code 1 > > Stop in /usr/ports/www/galeon/work/galeon-1.2.1/src. > *** Error code 1 > > Stop in /usr/ports/www/galeon/work/galeon-1.2.1. > *** Error code 1 > > Stop in /usr/ports/www/galeon/work/galeon-1.2.1. > *** Error code 1 > > Stop in /usr/ports/www/galeon. > brown# ^Dexit > > Script done on Mon Apr 29 10:13:26 2002 > > > What can I do to fix this? > > -- > "They that would give up essential liberty for temporary safety deserve > neither liberty nor safety." > -- Benjamin Franklin > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:28:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id C269B37B41A for ; Mon, 29 Apr 2002 14:28:25 -0700 (PDT) Received: from onceler.kciLink.com (onceler.kciLink.com [216.194.193.106]) by yertle.kciLink.com (Postfix) with ESMTP id AAE862178B for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) Received: from onceler.kciLink.com (smmsp@localhost [127.0.0.1]) by onceler.kciLink.com (8.12.2/8.12.2) with ESMTP id g3TLSNaW028117 for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) (envelope-from khera@onceler.kciLink.com) Received: (from khera@localhost) by onceler.kciLink.com (8.12.2/8.12.2/Submit) id g3TJTBrd036171; Mon, 29 Apr 2002 15:29:11 -0400 (EDT) Date: Mon, 29 Apr 2002 15:29:11 -0400 (EDT) Message-Id: <200204291929.g3TJTBrd036171@onceler.kciLink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Vivek Khera To: freebsd-questions@freebsd.org Subject: Re: smbus Newsgroups: ml.freebsd.questions References: <19413501504.20020419142503@kristal.ru> X-Trace: lorax.kciLink.com 1020105604 32431 216.194.193.106 (29 Apr 2002 18:40:04 GMT) X-Complaints-To: daemon@kciLink.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "IK" == Igor Kulemzin writes: IK> Hi, IK> I've add SMBus support to my kernel. But how can I use this? The "lmmon" port works for me to get voltages, fan speeds, and temperature. But it doesn't work on all motherboards, unfortunately. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:28:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 7403637B417 for ; Mon, 29 Apr 2002 14:28:25 -0700 (PDT) Received: from onceler.kciLink.com (onceler.kciLink.com [216.194.193.106]) by yertle.kciLink.com (Postfix) with ESMTP id 195332178E for ; Mon, 29 Apr 2002 17:28:25 -0400 (EDT) Received: from onceler.kciLink.com (smmsp@localhost [127.0.0.1]) by onceler.kciLink.com (8.12.2/8.12.2) with ESMTP id g3TLSNac028117 for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) (envelope-from khera@onceler.kciLink.com) Received: (from khera@localhost) by onceler.kciLink.com (8.12.2/8.12.2/Submit) id g3TJTIaW036902; Mon, 29 Apr 2002 15:29:18 -0400 (EDT) Date: Mon, 29 Apr 2002 15:29:18 -0400 (EDT) Message-Id: <200204291929.g3TJTIaW036902@onceler.kciLink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Vivek Khera To: freebsd-questions@freebsd.org Subject: Re: (HELP)Help Desk Solution Newsgroups: ml.freebsd.questions References: <3CBF9E1F.2070401@houston.rr.com> <20020421132351.A77492@rivendell.worldgatein.net> <20020421123743.C9124@fishballoon.dyndns.org> X-Trace: lorax.kciLink.com 1020105721 32431 216.194.193.106 (29 Apr 2002 18:42:01 GMT) X-Complaints-To: daemon@kciLink.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "SM" == Scott Mitchell writes: SM> If anyone has managed to get rt 2.x working on FreeBSD. I'd love to hear SM> from you. I never did manage to get all the Perl modules it needs to play SM> nicely together last time I tried. I just followed the directions step by step and it worked. When I updated perl to 5.6.1 from ports, it still worked, once I rebuilt all the modules that used dynamically linked code. These days I use the latest cpan module and the "r" command to find and update any modules and it still works great. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:28:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 6FADA37B416 for ; Mon, 29 Apr 2002 14:28:25 -0700 (PDT) Received: from onceler.kciLink.com (onceler.kciLink.com [216.194.193.106]) by yertle.kciLink.com (Postfix) with ESMTP id EB06E2178D for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) Received: from onceler.kciLink.com (smmsp@localhost [127.0.0.1]) by onceler.kciLink.com (8.12.2/8.12.2) with ESMTP id g3TLSNaa028117 for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) (envelope-from khera@onceler.kciLink.com) Received: (from khera@localhost) by onceler.kciLink.com (8.12.2/8.12.2/Submit) id g3TJTNl4037440; Mon, 29 Apr 2002 15:29:23 -0400 (EDT) Date: Mon, 29 Apr 2002 15:29:23 -0400 (EDT) Message-Id: <200204291929.g3TJTNl4037440@onceler.kciLink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Vivek Khera To: freebsd-questions@freebsd.org Subject: Re: Linux-Opera Beta 2 Newsgroups: ml.freebsd.questions References: <20020421002537.7967907f.jud@myrealbox.com> <20020423113205.A5324@encephalon.de> X-Trace: lorax.kciLink.com 1020106377 32431 216.194.193.106 (29 Apr 2002 18:52:57 GMT) X-Complaints-To: daemon@kciLink.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "RK" == Roger Kaputtnik writes: RK> Yes. RK> It is faster, and more stable than netscape or mozilla. RK> graet. Now if they could only get rid of the javascript errors they have on oh so many web sites... -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:28:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from yertle.kciLink.com (yertle.kcilink.com [216.194.193.105]) by hub.freebsd.org (Postfix) with ESMTP id 4BCEA37B41B for ; Mon, 29 Apr 2002 14:28:30 -0700 (PDT) Received: from onceler.kciLink.com (onceler.kciLink.com [216.194.193.106]) by yertle.kciLink.com (Postfix) with ESMTP id CDA9B2178C for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) Received: from onceler.kciLink.com (smmsp@localhost [127.0.0.1]) by onceler.kciLink.com (8.12.2/8.12.2) with ESMTP id g3TLSNaY028117 for ; Mon, 29 Apr 2002 17:28:24 -0400 (EDT) (envelope-from khera@onceler.kciLink.com) Received: (from khera@localhost) by onceler.kciLink.com (8.12.2/8.12.2/Submit) id g3TJTX1h038120; Mon, 29 Apr 2002 15:29:33 -0400 (EDT) Date: Mon, 29 Apr 2002 15:29:33 -0400 (EDT) Message-Id: <200204291929.g3TJTX1h038120@onceler.kciLink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Vivek Khera To: freebsd-questions@freebsd.org Subject: Re: VMWare Error Newsgroups: ml.freebsd.questions References: X-Trace: lorax.kciLink.com 1020108060 32431 216.194.193.106 (29 Apr 2002 19:21:00 GMT) X-Complaints-To: daemon@kciLink.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >>>>> "JJ" == Jeff Jeter writes: JJ> Please make sure that the kernel module `vmmon' is loaded. JJ> Press "Enter" to continue... When you installed the port, did you make sure the vmmon module was loaded? Normally this is done at boot by the /usr/local/etc/rc.d/vmware.sh script, but you need to run it by hand the first time you install it. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Vivek Khera, Ph.D. Khera Communications, Inc. Internet: khera@kciLink.com Rockville, MD +1-240-453-8497 AIM: vivekkhera Y!: vivek_khera http://www.khera.org/~vivek/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:32:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.c.bus.net (65-85-139-3.client.dsl.net [65.85.139.3]) by hub.freebsd.org (Postfix) with ESMTP id 55D6737B404 for ; Mon, 29 Apr 2002 14:32:23 -0700 (PDT) Received: from ws100.c.bus.net (ws100.c.bus.net [192.168.1.10]) by mail.c.bus.net (Postfix) with ESMTP id C1B6F7630A; Mon, 29 Apr 2002 17:32:21 -0400 (EDT) Received: (from cao@localhost) by ws100.c.bus.net (8.11.3/8.11.3) id g3TLWLX31454; Mon, 29 Apr 2002 17:32:21 -0400 (EDT) (envelope-from cao) Date: Mon, 29 Apr 2002 17:32:21 -0400 From: "Chuck O'Donnell" To: John Mills Cc: FreeBSD-questions Subject: Re: 1st-time kernel build questions Message-ID: <20020429213221.GB31279@bus.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 01:59:28PM -0400, John Mills wrote: > Hello - > > I have a couple of questions concerning the process of building FreeBSD > from sources. My system is a modest one (133MHz Cyrix 6x86) in which I > have installed FreeBSD-4.5 off a downloaded 4.5-RELEASE CD set. I am > working through an ASDL link, so web-access speed is reasonable. > > I would like to have a good kernel with current patches, but so far I'm > happy with my intial use of 4.5-RELEASE, and would stay with that version. > Naturally my first interest is security, but bugfixes (if any &8-)are > nice. It seems as good a time as any to learn how to build a FreeBSD > kernel. If you are going to rebuild your kernel from new sources, you probably want to update and rebuild your whole system. From the handbook: Warning: While it is possible to update only parts of your source tree, the only supported update procedure is to update the entire tree and recompile both userland (i.e., all the programs that run in user space, such as those in /bin and /sbin) and kernel sources. Updating only part of your source tree, only the kernel, or only userland will often result in problems. These problems may range from compile errors to kernel panics or data corruption. > > 1) Looking at the on-line Handbook and at Greg Lehey's FreeBSD Reference, > 'cvsup' seems able to either checkout a copy of all or parts of the > FreeBSD tree, or to mirror all or part of the CVS repository in my system, > from which I then checkout locally. My first idea would be to simply check > out a copy of the tree I want. If I don't expect to patch my source, > should I really create a local repository? I expect it would at least > double the disk space required, even if I manage to mirror just one > revision. You don't need the repository, just a snapshot of the source tree for the version you want to build. In your case, with 4.5-RELEASE, this would probably be the security updates using tag RELENG_4_5 or 4.5-STABLE with tag RELENG_4. In case you didn't already find them, there standard supfiles in /usr/share/examples/cvsup/. The two files you will usually use as an administrator are standard-supfile and ports-supfile. > > 2) With regards to building: 'makeworld' target seems to build a full set > of tools, libs, and files to support FreeBSD kernel mainenance. This > definitely seems like a good idea at this point. Does 'makeworld' work > properly without a local CVS repository? > Same as above. You just need a snapshot of the sources for the version you want to build. A couple pointers: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html BTW, building world on a P133 may take weeks ;-) Good luck. Chuck To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:38:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 0C5A637B404 for ; Mon, 29 Apr 2002 14:38:32 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172Iqs-0001l5-00 for questions@freebsd.org; Mon, 29 Apr 2002 14:38:31 -0700 Message-ID: <018901c1efdf$7dff18a0$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: Apache2 & PHP4 Date: Mon, 29 Apr 2002 17:39:30 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a problem getting PHP4 to work with my Apache2 server. Whenever I try to start the server it says: Syntax error on line 250 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp4.so into server: /usr/local/apache 2/modules/libphp4.so: Undefined symbol "pthread_getspecific" But there's no syntax error. I even copied it off the PHP site to make sure it was correct. Anybody have this problem? - Christopher J. Umina To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:38:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 277E837B400 for ; Mon, 29 Apr 2002 14:38:43 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3TLciU26840; Mon, 29 Apr 2002 17:38:44 -0400 Message-ID: <3CCDBE9B.70009@potentialtech.com> Date: Mon, 29 Apr 2002 17:43:55 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: dave@atkinshome.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: samba/inetd - netbios-ns/udp: bind: Address already in use error messages References: <20020429135656.16198.h010.c001.wm@mail.atkinshome.com.criticalpath.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG dave@atkinshome.com wrote: > On Mon, 29 April 2002, Bill Moran wrote >>Have you checked /usr/local/etc/rc.d for a startup script? >> > > there is no /usr/local/etc. I've never seen a FreeBSD system without /usr/local/etc - unless you manually removed it. > I checked /etc/rc.conf and /etc/defaults/rc.conf. Are > there any other startup locations to check? /usr/local/etc/rc.d & /usr/X11R6/etc/rc.d (if you installed X) These startup directories are configured in /etc/defaults/rc.conf >>Can you run sockstat to verify whether an smbd is listening for connections >>when nobody is connecting? If so, smbd has started in daemon mode, probably >>from /usr/local/etc/rc.d nmbd is the problem. It looks like it's starting as a daemon. Check carefully to find out where this is occurring. Bootup messages are helpful, if it's listed after "Local package initialization:" then it's being started from /usr/local/etc/rc.d (use "dmesg -a" to verify this) > note: 192.168.1.98 is the local address of the server, crwebx2. Other service > running is "webx" = WebCrossing message board server. > > crwebx2# sockstat > USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS > root webx-go 40755 20 tcp4 192.168.1.98:80 *:* > root webx-go 40755 24 udp4 *:2458 *:* > root webx-go 40755 25 udp4 *:2311 *:* > root webx-go 40755 26 udp4 *:1038 *:* > root webx-go 40755 27 udp4 *:2459 *:* > root webx-go 40755 28 udp4 *:2585 *:* > root webx-go 40755 29 udp4 *:2588 *:* > root webx-go 40755 30 tcp4 192.168.1.98:80 172.175.62.233:2431 > root webx-go 40755 32 udp4 *:2546 *:* > root webx-go 40755 34 udp4 *:2284 *:* > root webx-go 40755 35 tcp4 192.168.1.98:80 208.29.8.184:58570 > root sshd 40733 4 tcp4 192.168.1.98:22 192.168.5.140:1246 > root telnetd 40075 0 tcp4 192.168.1.98:23 192.168.1.252:4157 > root telnetd 40075 1 tcp4 192.168.1.98:23 192.168.1.252:4157 > root telnetd 40075 2 tcp4 192.168.1.98:23 192.168.1.252:4157 > root nmbd 119 0 udp4 *:137 *:* > root nmbd 119 1 udp4 *:137 *:* > root nmbd 119 2 udp4 *:137 *:* > root nmbd 119 6 udp4 *:138 *:* > root nmbd 119 7 udp4 192.168.1.98:137 *:* > root nmbd 119 8 udp4 192.168.1.98:138 *:* > root sendmail 78 4 tcp4 *:25 *:* > root sendmail 78 5 tcp4 *:587 *:* > root sshd 74 3 tcp4 *:22 *:* > root inetd 70 4 tcp4 *:21 *:* > root inetd 70 5 tcp4 *:23 *:* > root inetd 70 6 tcp4 *:139 *:* > root inetd 70 7 udp4 *:137 *:* > root syslogd 63 4 udp4 *:514 *:* > > USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS > > USER COMMAND PID FD PROTO ADDRESS > root webx-go 40755 8 stream webx.socket > root login 40076 3 dgram syslogd[63]:3 > root sendmail 78 3 dgram syslogd[63]:3 > root syslogd 63 3 dgram /var/run/log -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:41:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta1-rme.xtra.co.nz (mta1-rme.xtra.co.nz [210.86.15.129]) by hub.freebsd.org (Postfix) with ESMTP id 2BA0137B416 for ; Mon, 29 Apr 2002 14:41:49 -0700 (PDT) Received: from mta1 ([192.168.69.132]) by mta1-rme.xtra.co.nz with SMTP id <20020429211431.OTGR1001.mta1-rme.xtra.co.nz@mta1> for ; Tue, 30 Apr 2002 09:14:31 +1200 From: To: freebsd-questions@FreeBSD.ORG Subject: KDE Themes problem Date: Tue, 30 Apr 2002 9:14:31 +1200 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Message-Id: <20020429211431.OTGR1001.mta1-rme.xtra.co.nz@mta1> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi All, This is only a small problem, but I downloaded some themes from kde-look.org to spruce up my KDE 2.2.2 desktop but the install scripts won't work (./theme-install and ./style-install). It comes up as saying there is no command found. I am logged as root using the 'sh' shell as the interface. Can you help me on this. Thanks in advamce. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:43:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f178.law12.hotmail.com [64.4.19.178]) by hub.freebsd.org (Postfix) with ESMTP id 7724537B404 for ; Mon, 29 Apr 2002 14:43:51 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 29 Apr 2002 14:43:51 -0700 Received: from 62.85.65.228 by lw12fd.law12.hotmail.msn.com with HTTP; Mon, 29 Apr 2002 21:43:51 GMT X-Originating-IP: [62.85.65.228] From: "uwi mAn" To: questions@freebsd.org Subject: tar.bz2 Date: Mon, 29 Apr 2002 17:43:51 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 29 Apr 2002 21:43:51.0350 (UTC) FILETIME=[F3A7AD60:01C1EFC6] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ho to extract a tar.bz2 archieve? Thanks in advance. _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:43:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 138A037B417 for ; Mon, 29 Apr 2002 14:43:52 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172Iw2-0001sE-00; Mon, 29 Apr 2002 14:43:51 -0700 Message-ID: <019c01c1efe0$3ca8e920$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: , References: <20020429211431.OTGR1001.mta1-rme.xtra.co.nz@mta1> Subject: Re: KDE Themes problem Date: Mon, 29 Apr 2002 17:44:50 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Try doing: sh ./theme-install and sh ./ style-install Is it a 4.5 box? Because I'm having the same problem with csh.. ----- Original Message ----- From: To: Sent: Monday, April 29, 2002 2:14 PM Subject: KDE Themes problem > Hi All, > > This is only a small problem, but I downloaded some themes from kde-look.org to spruce up my KDE 2.2.2 desktop but the install scripts won't work (./theme-install and ./style-install). It comes up as saying there is no command found. I am logged as root using the 'sh' shell as the interface. Can you help me on this. Thanks in advamce. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:44:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 119F537B43C for ; Mon, 29 Apr 2002 14:44:28 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172Iwd-0001sm-00; Mon, 29 Apr 2002 14:44:27 -0700 Message-ID: <01a201c1efe0$52a8ee00$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: "uwi mAn" , References: Subject: Re: tar.bz2 Date: Mon, 29 Apr 2002 17:45:27 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG bunzip filename.bz2 ----- Original Message ----- From: "uwi mAn" To: Sent: Monday, April 29, 2002 2:43 PM Subject: tar.bz2 > Ho to extract a tar.bz2 archieve? > > Thanks in advance. > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:46:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ren.sasknow.com (ren.sasknow.com [207.195.92.131]) by hub.freebsd.org (Postfix) with ESMTP id 9552837B400 for ; Mon, 29 Apr 2002 14:46:49 -0700 (PDT) Received: from localhost (ryan@localhost) by ren.sasknow.com (8.11.6/8.11.6) with ESMTP id g3TLkhf68563; Mon, 29 Apr 2002 15:46:43 -0600 (CST) (envelope-from ryan@sasknow.com) Date: Mon, 29 Apr 2002 15:46:43 -0600 (CST) From: Ryan Thompson To: "Christopher J. Umina" Cc: uwi mAn , Subject: Re: tar.bz2 In-Reply-To: <01a201c1efe0$52a8ee00$0301a8c0@uminafamily.com> Message-ID: <20020429154601.M54907-100000@ren.sasknow.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Christopher J. Umina wrote to uwi mAn and questions@FreeBSD.ORG: > bunzip filename.bz2 Yes, and don't forget to install bzip2 ;-) /usr/ports/archivers/bzip2 Many ports list bzip2 as a dependency, so your system may already have it. - Ryan > ----- Original Message ----- > From: "uwi mAn" > To: > Sent: Monday, April 29, 2002 2:43 PM > Subject: tar.bz2 > > > > Ho to extract a tar.bz2 archieve? > > > > Thanks in advance. > > > > > > > > _________________________________________________________________ > > MSN Photos is the easiest way to share and print your photos: > > http://photos.msn.com/support/worldwide.aspx > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Ryan Thompson SaskNow Technologies - http://www.sasknow.com 901 1st Avenue North - Saskatoon, SK - S7K 1Y4 Tel: 306-664-3600 Fax: 306-664-3630 Saskatoon Toll-Free: 877-727-5669 (877-SASKNOW) North America To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:47:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.infowest.com (ns1.infowest.com [204.17.177.10]) by hub.freebsd.org (Postfix) with ESMTP id 2065237B400 for ; Mon, 29 Apr 2002 14:47:02 -0700 (PDT) Received: from frodo.jedis.com (brethren.jedis.com [208.186.107.202]) by ns1.infowest.com (Postfix) with ESMTP id 5DDB02257A; Mon, 29 Apr 2002 15:44:10 -0600 (MDT) Received: from there (localhost [127.0.0.1]) by frodo.jedis.com (8.12.3/8.12.2) with SMTP id g3TLi8bv000208; Mon, 29 Apr 2002 15:44:09 -0600 (MDT) (envelope-from kendall@jedis.com) Message-Id: <200204292144.g3TLi8bv000208@frodo.jedis.com> Content-Type: text/plain; charset="iso-8859-1" From: "Kendall P. Gifford" Reply-To: kendall@jedis.com To: Joe Marcus Clarke Subject: Re: pcm with AC'97 audio not working Date: Mon, 29 Apr 2002 15:44:08 -0600 X-Mailer: KMail [version 1.3.2] References: <200204290608.g3T68Rjl002153@frodo.jedis.com> <1020107188.22787.22.camel@gyros.marcuscom.com> In-Reply-To: <1020107188.22787.22.camel@gyros.marcuscom.com> Cc: questions@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 01:06 pm, Joe Marcus Clarke wrote: > On Mon, 2002-04-29 at 03:08, Kendall P. Gifford wrote: > > Hello all. I have AC'97 audio integrated into my motherboard, an MSI > > KT3 Ultra-ARU (via apollo kt333 chipset, vt8233a southbridge, with > > integrated realtek alc650 6-channel ac'97 audio). I get the following > > line from dmesg during bootup: > > > > pcm0: port 0xe800-0xe8ff irq 9 at device 17.5 on pci0 > > > > I have also run MAKEDEV snd0; as described in the pcm(4) man page. > > Then, following the recommended testing procedure in the handbook, I > > installed mpg123 and tried to play an mp3 with the following results: > > > > #mpg123 waste.mp3 > > [...omitted startup lines...] > > pcm0:play:0: play interrupt timeout, channel dead > > Try applying this patch to /sys/dev/sound/pcm/ac97.c > > http://docs.freebsd.org/cgi/getmsg.cgi?fetch=14481+0+archive/2002/freebsd >-multimedia/20020414.freebsd-multimedia > > In fact, you may find some use in this whole thread. It looks like some > patches are being committed to -current to address this problem. > > Joe > > > I was hoping that there would be support for my on-board sound and was > > excited when I saw AC'97 support in the pcm driver. Can someone shed > > some light on the problem? Have I possibly not setup something > > correctly? Is there some bug that just needs fixed? Is there just not > > support for my RealTek ALC650 AC'97 Audio yet? > > > > Thanks in advance for your help. First of all, thanks for the suggestion. Unfortunately, after I patched ac97.c and rebuilt, I still have the same exact problem. If you, or anyone else has any other suggestions, please let me know. In the meantime I'll just keep Google-ing along soundless. Oh, since I didn't mention it before, I am running the latest 4.5-STABLE. ======================================== Kendall P. Gifford http://kendall.jedis.com kendall@jedis.com ======================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:53: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dire.bris.ac.uk (dire.bris.ac.uk [137.222.10.60]) by hub.freebsd.org (Postfix) with ESMTP id ACF5037B419 for ; Mon, 29 Apr 2002 14:52:59 -0700 (PDT) Received: from mail.ilrt.bris.ac.uk by dire.bris.ac.uk with SMTP-PRIV with ESMTP; Mon, 29 Apr 2002 22:52:56 +0100 Received: from cmjg (helo=localhost) by mail.ilrt.bris.ac.uk with local-esmtp (Exim 3.16 #1) id 172J3B-0001LP-00; Mon, 29 Apr 2002 22:51:13 +0100 Date: Mon, 29 Apr 2002 22:51:13 +0100 (BST) From: Jan Grant X-X-Sender: cmjg@mail.ilrt.bris.ac.uk To: "Christopher J. Umina" Cc: questions Subject: Re: Apache2 & PHP4 In-Reply-To: <018901c1efdf$7dff18a0$0301a8c0@uminafamily.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 29 Apr 2002, Christopher J. Umina wrote: > I have a problem getting PHP4 to work with my Apache2 server. Whenever I > try to start the server it says: > > Syntax error on line 250 of /usr/local/apache2/conf/httpd.conf: > Cannot load /usr/local/apache2/modules/libphp4.so into server: > /usr/local/apache > 2/modules/libphp4.so: Undefined symbol "pthread_getspecific" > > But there's no syntax error. I even copied it off the PHP site to make sure > it was correct. Anybody have this problem? Either: compile apache 2 with pthreading turned on, or compile the php module with pthreads turned off. -- jan grant, ILRT, University of Bristol. http://www.ilrt.bris.ac.uk/ Tel +44(0)117 9287088 Fax +44 (0)117 9287112 RFC822 jan.grant@bris.ac.uk __/\____/\_____/\____/|_____________________________________ flatline To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:55:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp3out.rdc-nyc.rr.com (nycsmtp3out.rdc-nyc.rr.com [24.29.99.228]) by hub.freebsd.org (Postfix) with ESMTP id A4D2B37B416 for ; Mon, 29 Apr 2002 14:55:33 -0700 (PDT) Received: from scott1.nyc.rr.com (24-168-24-239.nyc.rr.com [24.168.24.239]) by nycsmtp3out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id g3TLuHvO017269; Mon, 29 Apr 2002 17:56:17 -0400 (EDT) Message-Id: <5.1.0.14.0.20020429175410.00c46510@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Mon, 29 Apr 2002 17:55:30 -0400 To: "uwi mAn" , questions@FreeBSD.ORG From: Scott Subject: Re: tar.bz2 In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 17:43 2002/04/29 -0400, uwi mAn wrote: >Ho to extract a tar.bz2 archieve? I have a page on this--mainly aimed for Linux newbies, but might be useful to you http://home.nyc.rr.com/computertaijutsu/tarball.html On the page it mentions the difference between RedHat, which uses tar -jxvf and Slackware which uses tar -yxvf. FreeBSD can use either, which, while a small thing, something I found kind of neat. Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:57:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web4-rme.xtra.co.nz (web4-rme.xtra.co.nz [210.86.15.139]) by hub.freebsd.org (Postfix) with ESMTP id 25C8537B417 for ; Mon, 29 Apr 2002 14:57:51 -0700 (PDT) Received: from mta1 ([192.168.69.132]) by mta1-rme.xtra.co.nz with SMTP id <20020429214853.PTNP1001.mta1-rme.xtra.co.nz@mta1> for ; Tue, 30 Apr 2002 09:48:53 +1200 From: To: freebsd-questions@FreeBSD.ORG Subject: Re; KDE Themes problem Date: Tue, 30 Apr 2002 9:48:53 +1200 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Message-Id: <20020429214853.PTNP1001.mta1-rme.xtra.co.nz@mta1> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi There, Yes. It is a 4.5 box. Thanks. Try doing: sh ./theme-install and sh ./ style-install Is it a 4.5 box? Because I'm having the same problem with csh.. ----- Original Message ----- From: To: Sent: Monday, April 29, 2002 2:14 PM Subject: KDE Themes problem > Hi All, > > This is only a small problem, but I downloaded some themes from kde-look.org to spruce up my KDE 2.2.2 desktop but the install scripts won't work (./theme-install and ./style-install). It comes up as saying there is no command found. I am logged as root using the 'sh' shell as the interface. Can you help me on this. Thanks in advamce. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 14:59:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from roc-66-66-72-6.rochester.rr.com (roc-66-66-72-6.rochester.rr.com [66.66.72.6]) by hub.freebsd.org (Postfix) with ESMTP id E610737B425 for ; Mon, 29 Apr 2002 14:59:41 -0700 (PDT) Received: by roc-66-66-72-6.rochester.rr.com (Postfix, from userid 1000) id A165E901A00; Mon, 29 Apr 2002 17:59:19 -0400 (EDT) Date: Mon, 29 Apr 2002 17:59:19 -0400 From: mpd To: Ryan Thompson Cc: "Christopher J. Umina" , uwi mAn , questions@FreeBSD.ORG Subject: Re: tar.bz2 Message-ID: <20020429175919.A22142@rochester.rr.com> References: <01a201c1efe0$52a8ee00$0301a8c0@uminafamily.com> <20020429154601.M54907-100000@ren.sasknow.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020429154601.M54907-100000@ren.sasknow.com>; from ryan@sasknow.com on Mon, Apr 29, 2002 at 03:46:43PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 03:46:43PM -0600, Ryan Thompson wrote: > Christopher J. Umina wrote to uwi mAn and questions@FreeBSD.ORG: > > > bunzip filename.bz2 > > Yes, and don't forget to install bzip2 ;-) It's been in the base system for awhile now. > > /usr/ports/archivers/bzip2 > > Many ports list bzip2 as a dependency, so your system may > already have it. > > - Ryan > > mike -- ___________________________________________________________ "MR NUTTY, HOW ABOUT A GLASS, WHAT SAY YOU!" - Pokey the Penguin from "ONE GLASS OF TURPENTINE COMING RIGHT UP" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 15: 3:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server10.safepages.com (server10.safepages.com [216.127.146.24]) by hub.freebsd.org (Postfix) with ESMTP id 6BA9437B400 for ; Mon, 29 Apr 2002 15:03:00 -0700 (PDT) Received: from smtp.acer-access.com (0-1pool25-247.nas32.philadelphia1.pa.us.da.qwest.net [65.129.25.247]) by server10.safepages.com (Postfix) with SMTP id 09D293C23A; Mon, 29 Apr 2002 22:02:51 +0000 (GMT) X-Mailer: Ultrafunk Popcorn release 1.20 (04-Apr-2002) X-URL: http://www.ultrafunk.com/products/popcorn Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=iso-8859-1 X-Priority: 3 Date: Mon, 29 Apr 2002 18:02:57 -0500 From: E.J.Cerejo To: lab.stihler@unidavi.edu.br, freebsd-questions@FreeBSD.ORG Subject: Re: StarOffice 5.2 installation Reply-To: ecerejo@zapo.net Organization: Home Message-Id: <20020429220251.09D293C23A@server10.safepages.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > >Subject: StarOffice 5.2 installation > From: lab.stihler@unidavi.edu.br > Date: Mon, 29 Apr 2002 15:04:24 -0300 > To: question freebsd > >Hi I have this file: so-5_2-ga-bin-linux-pt.bin >that is the official file from Sun (I guess) >Where do I find info on how to install it under >freebsd? I tried to install it but it fails and >tells me about a missing lib-file. Is there some >StarOffice-HOWTO out there? :) > >note: I already have the linux emulation up >and running. I just dont know how to install the >applications and use it. > >regards. > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message I believe you're trying to install the Portuguese version of staroffice and I don't think there is a port StarOffice in Portuguese. The English version will install just fine using the port, /usr/ports/editors/soffice52. Any way if you still want to try to install the pt version you will need rebuild your kernel with these options: options "P1003_B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" without these you won't be able to install. I have the instructions on how to install staroffice using the tarball but not the binary file which you seem to have. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 15:12:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from salmon.maths.tcd.ie (salmon.maths.tcd.ie [134.226.81.11]) by hub.freebsd.org (Postfix) with SMTP id 746E837B42F for ; Mon, 29 Apr 2002 15:11:24 -0700 (PDT) Received: from walton.maths.tcd.ie by salmon.maths.tcd.ie with SMTP id ; 29 Apr 2002 23:11:22 +0100 (BST) To: Lawrence Mayer dsg Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Help! vnconfig won't work In-Reply-To: Your message of "Mon, 29 Apr 2002 03:29:50 +0200." Date: Mon, 29 Apr 2002 23:11:22 +0100 From: Ian Dowse Message-ID: <200204292311.aa10463@salmon.maths.tcd.ie> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message , Lawrence Mayer dsg writes: >NOW, AFTER REINSTALLING FREEBSD, VNCONFIG WON'T WORK: > >"kldload: can't load vn.ko: Operation not permitted" What security level did you specify when you were installing? Some security levels don't permit kernel modules to be loaded. To revert to the normal level, remove the kern_securelevel* lines from /etc/rc.conf and reboot. Ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 15:13:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server3.safepages.com (server3.safepages.com [216.127.146.5]) by hub.freebsd.org (Postfix) with ESMTP id EFAF037B41A for ; Mon, 29 Apr 2002 15:13:20 -0700 (PDT) Received: from smtp.acer-access.com (0-1pool25-247.nas32.philadelphia1.pa.us.da.qwest.net [65.129.25.247]) by server3.safepages.com (Postfix) with SMTP id B34395E24; Mon, 29 Apr 2002 22:11:08 +0000 (GMT) X-Mailer: Ultrafunk Popcorn release 1.20 (04-Apr-2002) X-URL: http://www.ultrafunk.com/products/popcorn Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=iso-8859-1 X-Priority: 3 Date: Mon, 29 Apr 2002 18:11:12 -0500 From: E.J.Cerejo To: lab.stihler@unidavi.edu.br, freebsd-questions@FreeBSD.ORG Subject: Re: StarOffice 5.2 installation Reply-To: ecerejo@zapo.net Organization: Home Message-Id: <20020429221108.B34395E24@server3.safepages.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG By the way, here's the link to manually install staroffice5.2 http://minnie.tuhs.org/Misc/staroffice.html > >Subject: StarOffice 5.2 installation > From: lab.stihler@unidavi.edu.br > Date: Mon, 29 Apr 2002 15:04:24 -0300 > To: question freebsd > >Hi I have this file: so-5_2-ga-bin-linux-pt.bin >that is the official file from Sun (I guess) >Where do I find info on how to install it under >freebsd? I tried to install it but it fails and >tells me about a missing lib-file. Is there some >StarOffice-HOWTO out there? :) > >note: I already have the linux emulation up >and running. I just dont know how to install the >applications and use it. > >regards. > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 15:21:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from triphop.teambest.net (triphop.hotwaxmedia.com [64.163.146.35]) by hub.freebsd.org (Postfix) with ESMTP id D004937B400 for ; Mon, 29 Apr 2002 15:21:13 -0700 (PDT) Received: from hotwaxmedia.com (adsl-63-193-165-26.dsl.mtry01.pacbell.net [63.193.165.26]) by triphop.teambest.net (8.11.0/8.11.0) with ESMTP id g3TIsYO15332 for ; Mon, 29 Apr 2002 11:54:34 -0700 Message-ID: <3CCD982F.85E116B3@hotwaxmedia.com> Date: Mon, 29 Apr 2002 11:59:59 -0700 From: Mike Bates Organization: HOTWAX X-Mailer: Mozilla 4.75 [en] (Windows NT 5.0; U) X-Accept-Language: en,pdf MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: kernal logs Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have a message in my kernal log as follows: Apr 25 02:08:46 Production /kernel: arp: [my ip address was here] moved from 00:10:67:00:2b:24 to 00:02:3b:01:6c:9a on fxp0 I am a total newbie, and I wonder if anyone could help me understand this by pointing me to a good reference. TYIA. All the best, MKB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 15:26:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c001.snv.cp.net (c001-h001.c001.snv.cp.net [209.228.32.115]) by hub.freebsd.org (Postfix) with SMTP id 68EB337B416 for ; Mon, 29 Apr 2002 15:26:15 -0700 (PDT) Received: (cpmta 18895 invoked from network); 29 Apr 2002 15:26:14 -0700 Received: from 209.228.32.130 (HELO mail.atkinshome.com.criticalpath.net) by smtp.register-admin.com (209.228.32.115) with SMTP; 29 Apr 2002 15:26:14 -0700 X-Sent: 29 Apr 2002 22:26:14 GMT Received: from [64.75.4.241] by mail.atkinshome.com with HTTP; Mon, 29 Apr 2002 15:26:06 -0700 (PDT) Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 To: wmoran@potentialtech.com Cc: freebsd-questions@FreeBSD.ORG From: dave@atkinshome.com Subject: Re: samba/inetd - netbios-ns/udp: bind: Address already in use error messages X-Sent-From: dave@atkinshome.com Date: Mon, 29 Apr 2002 15:26:06 -0700 (PDT) X-Mailer: Web Mail 5.0.8-8 Message-Id: <20020429152614.22529.h016.c001.wm@mail.atkinshome.com.criticalpath.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > >>Have you checked /usr/local/etc/rc.d for a startup script? > > there is no /usr/local/etc. > I've never seen a FreeBSD system without /usr/local/etc - unless > you manually removed it. Yes, I wondered about that (/usr/local/etc). It was not created during the install of any of my systems, unless I chose to add packages such as apache. On another freeBSD box that I installed the apache distribution and other things, /usr/local/etc got created, along with an apache folder in there which has a startup script for apache. For these servers, I did a developer install, but did not install any additional packages. After the initial install, there are no folders in /usr/local at all. To track down own the daemon is getting started, I start with /etc/defaults/rc.conf which says: rc_conf_files="/etc/rc.conf /etc/rc.conf.local" there is no rc.conf.local checked both files, no mention of anything samba-related. No X installed either. > nmbd is the problem. It looks like it's starting as a daemon. Check carefully > to find out where this is occurring. Bootup messages are helpful, if it's > listed after "Local package initialization:" then it's being started from > /usr/local/etc/rc.d (use "dmesg -a" to verify this) nothing helpful in dmesg...but here it is, just in case you see something (Had to reboot b/c it was full of error messages): Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Mon Mar 11 19:34:35 PST 2002 root@crwebx3.crdc.consumerreview.org:/usr/obj/usr/src/sys/WEBX Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (662.22-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff real memory = 2147475456 (2097144K bytes) config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> q avail memory = 2087936000 (2039000K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Changing APIC ID for IO APIC #1 from 0 to 3 on chip Programming 16 pins in IOAPIC #0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc0387000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc038709c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fc330 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard IOAPIC #1 intpin 6 -> irq 2 pci0: on pcib0 fxp0: port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 2 at device 8.0 on pci0 fxp0: Ethernet address 00:d0:b7:9e:aa:4a inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at 14.0 isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x8b0-0x8bf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ohci0: mem 0xfe100000-0xfe100fff irq 10 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib1: on motherboard IOAPIC #1 intpin 15 -> irq 5 IOAPIC #1 intpin 0 -> irq 10 pci1: on pcib1 pcib2: at device 2.0 on pci1 IOAPIC #1 intpin 14 -> irq 11 pci2: on pcib2 pci2: (vendor=0x9005, dev=0x00c5) at 4.0 irq 5 ahc0: port 0xd800-0xd8ff mem 0xf8ffe000-0xf8ffefff irq 11 at device 4.1 on pci2 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs aac0: mem 0xf0000000-0xf3ffffff irq 5 at device 2.1 on pci1 aac0: i960RX 100MHz, 54MB cache memory, no battery support aac0: Kernel 2.1-3, Build 2951, S/N 401d0 fxp1: port 0xccc0-0xccff mem 0xfa000000-0xfa0fffff,0xfa100000-0xfa100fff irq 10 at device 8.0 on pci1 fxp1: Ethernet address 00:b0:d0:49:d6:e9 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0:

Hello All,

 

I would like to thank you all for your help with my little issue. = The solution that seemed to work for now was to compile fa_select as found on the freebsddiary article and the card will configure just = fine!

 

Thanks again,

 

Blane

------=_NextPart_000_0020_01C1EFA0.40DE97A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 17:16:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.tricom.com.ph (phoenix.tricom.com.ph [203.167.87.58]) by hub.freebsd.org (Postfix) with SMTP id B3A8137B416 for ; Mon, 29 Apr 2002 17:16:35 -0700 (PDT) Received: (qmail 22638 invoked from network); 30 Apr 2002 00:16:34 -0000 Received: from unknown (HELO orion.tricom.com.ph) (203.167.87.59) by phoenix.tricom.com.ph with SMTP; 30 Apr 2002 00:16:34 -0000 Date: Tue, 30 Apr 2002 08:20:04 +0800 From: Jimmy To: Axel Scheepers Cc: freebsd-questions@freebsd.org Subject: Re: ipfilter+ipfw Message-Id: <20020430082004.6bb40e15.jimmy@tricom.com.ph> In-Reply-To: <20020429140344.E61218@mars.thuis> References: <20020426143406.5d9ede72.jimmy@tricom.com.ph> <20020429140344.E61218@mars.thuis> Organization: Tricom X-Mailer: Sylpheed version 0.7.5 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 29 Apr 2002 14:03:45 +0200 Axel Scheepers wrote: > On Fri, Apr 26, 2002 at 02:34:06PM +0800, Jimmy wrote: > > Hi, > > > > I've configure my FreeBSD-4.5-STABLE firewall host, and I installed 4 NIC cards on it and I'm using ipfilter to NAT and packet filter & ipfw to bridge and as a traffic shaper. Here are the following list of my NIC card: > > > > fxp0=localnet1(192.168.100.0/24)nat > > xl0=external interface connected to dsl modem > > xl1=localnet2(192.168.200.0/24)nat > > xl2=filter bridge to xl0 > > > > The outside world can see my host connected to the bridge NIC and vice versa, except my localnet1 and localnet2. Do I missed something in my configuration? How can I connect my localnet1 & 2 to talk to host connected to xl2 which is being bridge. > > Hi, > > It is general a bad idea to mix ipf and ipfilter, ipfilter and ipnat combo > works directly on the kernel tables, while ipf runs in userspace and is thus > somewhat slower. Correction pls. ipfw and ipfilter. I don't have a problem with the speed, in fact it gives me a speed and equal distribution of bandwidth -). > The 192.168.x.x aren't routed on the internet, and must be remangled to the > modem's ip. (NAT) This seems to go wrong. At my place I have ipfilter/ipnat > where ipnat does the following: > map 192.168.0.0/16 -> 0/32 portmap auto > map 192.168.0.0/16 -> 0/32 proxy ftp > rdr 0.0.0.0/0 port 80 -> 192.168.0.5 port 80 Yes, we have the same ipnat.rule and my nat works perfectly, but not with filter bridge, as CJC said, it is evil to nat filter bridge. > > which directs all traffic to another host in my local lan. > > You can use tcpdump to see what packets are being forwarded (did you sysctl -w > net.inet.ip.forwarding=1?) Yes, I've enable packet forwarding and its A1 working. > > A couple of extra debug generating rules isn't bad either, to see what gets > denied and what goes through. > Probably best solution is to stick with one of the two firewalls, instead of > using both at the same time. I don't think so, ipfw & ipfilter is a good combination, and I think most firewall host and dmzs are using this and it is mention in IPFilter FAQ (http://home.earthlink.net/~jaymzh666/ipf/IPFfreebsd.html#14). > > > > > TIA, > > > > Jimmy > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > Gr, > -- > Axel Scheepers > UNIX System Administrator > > email: axel@axel.truedestiny.net > a.scheepers@iae.nl > http://axel.truedestiny.net/~axel > ------------------------------------------ > A fanatic is one who can't change his mind and won't change the > subject. > -- Winston Churchill > ------------------------------------------ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message regards, Jimmy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 17:29:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from boston3.g4.net (boston3.G4.NET [216.177.0.33]) by hub.freebsd.org (Postfix) with ESMTP id 5470337B41D for ; Mon, 29 Apr 2002 17:29:16 -0700 (PDT) Received: from attbi.com (internetgate.office.G4.net [216.177.0.160]) by boston3.g4.net (8.11.3/8.11.3) with ESMTP id g3U0TET76479 for ; Mon, 29 Apr 2002 20:29:15 -0400 (EDT) (envelope-from drlski@attbi.com) Message-ID: <3CCDF312.1040506@attbi.com> Date: Mon, 29 Apr 2002 20:27:46 -0500 From: David Loszewski User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.7) Gecko/20020123 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions Subject: vim colors different on freebsd? Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have two boxes, a freebsd box and a linux box. I am using the same terminals on both boxes and the same .vimrc files on both boxes along with the same vim versions. Even though everything is the same, on the freebsd box no matter what I do all the coloring in vim is bold. I also have my teminal as color for different file types and those are normal, not bold so i don't understand why vim is doing this on the bsd box. Any ideas?? Dave To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 17:49:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (rdu57-17-158.nc.rr.com [66.57.17.158]) by hub.freebsd.org (Postfix) with ESMTP id C00D937B400 for ; Mon, 29 Apr 2002 17:49:53 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g3U0nVB7019047; Mon, 29 Apr 2002 20:49:31 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: Nautilus From: Joe Marcus Clarke To: Gautham Ganapathy Cc: "FreeBSD.org - Questions" In-Reply-To: <005501c1ef78$534e02e0$1901a8c0@ti.com> References: <01a401c1ed04$84e88e90$1901a8c0@ti.com> <1019838687.312.52.camel@gyros.marcuscom.com> <005501c1ef78$534e02e0$1901a8c0@ti.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 29 Apr 2002 20:49:31 -0400 Message-Id: <1020127771.312.3.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 2002-04-29 at 09:20, Gautham Ganapathy wrote: > On Friday, April 26, 2002 10:01 PM, From: "Joe Marcus Clarke wrote > > > > On Fri, 2002-04-26 at 06:26, Gautham Ganapathy wrote: > > > Hi > > > > > > I have installed FreeBSD 4.5-RELEASE. I have configured it to > startup > > > with GNOME. However, nautilus windows seems to take a long time to > > > start. when i click on a folder, it waits a long time before it > displays > > > the files (list format) even though there is almost no disk > activity. is > > > this a problem with the nautilus ? these delays don't appear under > linux > > > in the same system > > > > Nautilus is a beast. I see delays when compared to the older gmc. > You > > may be able to get better performance by upgrading to the latest GNOME > > 1.4.x bits from ports. > > > > Joe > > > > I am using FreeBSD 4.5 Feb 2002 release with GNOME 1.4. The CDs don't > seem to contain much of KDE, do they ? I think I'll just keep myself > from using any file managers. Also, GNOME office is not on the CDs. Will > it be included in the next release ? We're trying to get things to the point where all the GNOME packages will build. We're hoping to be able to provide AbiWord, Gnumeric, Evolution, and dia as packages for 4.6. Joe > > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 18:26:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 564AC37B419 for ; Mon, 29 Apr 2002 18:26:38 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172MPd-0005k7-00 for questions@freebsd.org; Mon, 29 Apr 2002 18:26:37 -0700 Message-ID: <021601c1efff$5ca1efa0$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: More accurate iostat Date: Mon, 29 Apr 2002 21:27:38 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there anything more accurate than iostat? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 18:58:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id 6403737B41C for ; Mon, 29 Apr 2002 18:58:33 -0700 (PDT) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id 368898147C; Tue, 30 Apr 2002 11:28:31 +0930 (CST) Date: Tue, 30 Apr 2002 11:28:31 +0930 From: Greg 'groggy' Lehey To: Kris Kennaway Cc: Anton Shcherbinin , freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it? Message-ID: <20020430112831.B8571@wantadilla.lemis.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429122206.A55341@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020429122206.A55341@xor.obsecurity.org> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday, 29 April 2002 at 12:22:07 -0700, Kris Kennaway wrote: > On Sun, Apr 28, 2002 at 11:17:38PM +0400, Anton Shcherbinin wrote: > >> As I have already said, the same happens with any application and any >> host. E. g., with ftp and ftp.freebsd.org : >> 1) my host queries our DNS server for AAAA record of ftp.freebsd.org >> 2) query times out in 5 secs >> 3) the same query >> 4) query times out in 10 secs >> 5) the same query >> 6) query times out in 20 secs >> 7) the same query >> 8) query times out in 40 secs > > Your DNS server is broken. It should be returning an error if it > doesn't understand the AAAA request, or an appropriate IPv6 address > if it exists, or an "address not found" packet. Hmm, indeed, that sounds like the solution. Anton, have you tried a different name server? Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 19: 8: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from zoon.lafn.org (zoon.lafn.org [206.117.18.9]) by hub.freebsd.org (Postfix) with ESMTP id 217E337B422 for ; Mon, 29 Apr 2002 19:07:31 -0700 (PDT) Received: from [10.0.1.90] (66-81-26-76-modem.o1.com [66.81.26.76]) by zoon.lafn.org (8.11.3/8.11.3) with ESMTP id g3U27Ph02295 for ; Mon, 29 Apr 2002 19:07:27 -0700 (PDT) (envelope-from bc979@lafn.org) Mime-Version: 1.0 X-Sender: bc979@mail.lafn.org Message-Id: In-Reply-To: <20020430112831.B8571@wantadilla.lemis.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429122206.A55341@xor.obsecurity.org> <20020430112831.B8571@wantadilla.lemis.com> Date: Mon, 29 Apr 2002 19:04:57 -0700 To: freebsd-questions@FreeBSD.ORG From: Doug Hardie Subject: Windoze Disk Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a hard disk from a friend that got corrupted by a virus. The system itself is shot. However, I want to mount it on FreeBSD so I can recover some school papers from it for them. How do I mount the disk? -- -- Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 19:18:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hyperreal.org (taz3.hyperreal.org [209.133.83.22]) by hub.freebsd.org (Postfix) with SMTP id 0020C37B41C for ; Mon, 29 Apr 2002 19:18:11 -0700 (PDT) Received: (qmail 77726 invoked by uid 1001); 30 Apr 2002 02:17:59 -0000 Message-ID: <20020430021759.77725.qmail@hyperreal.org> Subject: sendmail: Djmy.domain not working after upgrade. FAQ? To: freebsd-questions@freebsd.org Date: Mon, 29 Apr 2002 19:17:59 -0700 (PDT) From: Mike Brown X-Whoa: whoa. X-Mailer: ELM [version 2.4ME+ PL92 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After upgrading my FreeBSD 4.4-STABLE (September-ish) to FreeBSD 4.5-STABLE (coupla days ago), which includes a more up-to-date version of sendmail, I am no longer able to get the $j in my sendmail.cf to "work". That is, in my sendmail.cf, I have Djskew.org so that the default for outgoing mail will be user@skew.org rather than the canonical user@chilled.skew.org. This always worked in the past, but now, even after editing /etc/mail/sendmail.cf and kill -HUP'ing the process, I keep getting user@chilled.skew.org. I poked around a bit for FAQs and mailing list postings, but couldn't find anything about this. Where should I look next? Thanks. - Mike ____________________________________________________________________________ mike j. brown | xml/xslt: http://skew.org/xml/ denver/boulder, colorado, usa | personal: http://hyperreal.org/~mike/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 19:59: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 6763C37B416 for ; Mon, 29 Apr 2002 19:58:59 -0700 (PDT) Received: from dan.emsphone.com (smmsp@localhost [127.0.0.1]) by dan.emsphone.com (8.12.2/8.12.3) with ESMTP id g3U2wu2Z004259; Mon, 29 Apr 2002 21:58:56 -0500 (CDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.2/Submit) id g3U2wtXT004255; Mon, 29 Apr 2002 21:58:55 -0500 (CDT) Date: Mon, 29 Apr 2002 21:58:55 -0500 From: Dan Nelson To: "Christopher J. Umina" Cc: questions@FreeBSD.ORG Subject: Re: More accurate iostat Message-ID: <20020430025855.GQ77779@dan.emsphone.com> References: <021601c1efff$5ca1efa0$0301a8c0@uminafamily.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <021601c1efff$5ca1efa0$0301a8c0@uminafamily.com> User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Apr 29), Christopher J. Umina said: > Is there anything more accurate than iostat? In what way? iostat should be completely accurate. -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 20:28:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from andrsn.stanford.edu (andrsn.Stanford.EDU [171.66.112.163]) by hub.freebsd.org (Postfix) with ESMTP id C477837B400 for ; Mon, 29 Apr 2002 20:28:19 -0700 (PDT) Received: from localhost (localhost.stanford.edu [127.0.0.1]) by andrsn.stanford.edu (8.11.6/8.11.6) with ESMTP id g3U3MlH25214; Mon, 29 Apr 2002 20:22:47 -0700 (PDT) (envelope-from andrsn@andrsn.stanford.edu) Date: Mon, 29 Apr 2002 20:22:47 -0700 (PDT) From: Annelise Anderson To: Mike Galvez Cc: "Christopher J. Umina" , questions@FreeBSD.ORG Subject: Re: Cron can't exec /bin/sh In-Reply-To: <20020429155618.C44973@mail.virginia.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 29 Apr 2002, Mike Galvez wrote: > On Mon, Apr 29, 2002 at 03:28:33PM -0700, Christopher J. Umina wrote: > > hihi, > > > > Why can't cron exec /bin/sh? I got this e-mail as root..: > > > > cron: execl: couldn't exec `/bin/sh': Permission denied > > > > This is my crontab file: > > > > 0 0 * * 0 cvsup supfile > > Try using the full path to cvsup i.e.: /usr/local/bin/cvsup > > 00 15 * * 1-5 /usr/local/bin/cvsup supfile Also if this is the system crontab (in /etc) you need to specify as the 6th field the user who is to run the command, i.e., in this case root. Annelise -- Annelise Anderson Author of: FreeBSD: An Open-Source Operating System for Your PC Available from: BSDmall.com and amazon.com Book Website: http://www.bittreepress.com/FreeBSD/introbook/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 20:32: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from serv1.wallnet.com (server1.wallnet.com [208.225.162.122]) by hub.freebsd.org (Postfix) with ESMTP id D4AD537B405 for ; Mon, 29 Apr 2002 20:31:59 -0700 (PDT) Received: from localhost (timothyk@localhost) by serv1.wallnet.com (8.11.5/8.11.5) with ESMTP id g3U3VxB40176 for ; Mon, 29 Apr 2002 23:31:59 -0400 (EDT) (envelope-from timothyk@serv1.wallnet.com) Date: Mon, 29 Apr 2002 23:31:58 -0400 (EDT) From: Tim Kellers To: Subject: kde3 icon(s) and latter Kmail woes Message-ID: <20020429232717.S40045-100000@serv1.wallnet.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After doing considerable battle with kde3, I finally got the whole thing installed (and working quite nicely). I use kde3 on my laptop (Dell Latitude C600, FreeBSD 4.5 -STABLE) and I have apm enabled. After the upgrade from kde 2.2.2 to kde3, my battery-monitor icon has gone bye-bye. The power control features still work, but I only have the generic "?" icon in the dock, where the battery-monitor icon should be. Doesn anyone know, or could anyone point me to a resource, where the icon files for kde3 are installed to and from which port/package? I know this is a tiny thing, but this desktop is oh-so-close to being perfect. TIA, Tim Kellers CPE/NJIT PS arrgh! Just when I thought everything (else) was working, I get this message when I try to send from the Kmail e-mail client Sending failed: Sendmail exited abnormally. The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder. Note: Other messages will also be blocked by this message, as long as it is in the 'outbox' folder The following transport protocol was used: Sendmail Sendmail is working fine from the shell for me, any ideas (or hints) as to what (or why) Kmail is complaining about? Tim (again) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 21:25:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mts-104.wallnet.com (mts-104.wallnet.com [208.225.162.36]) by hub.freebsd.org (Postfix) with ESMTP id 5EB9037B404 for ; Mon, 29 Apr 2002 21:25:21 -0700 (PDT) Received: from mts-104.wallnet.com (localhost [127.0.0.1]) by mts-104.wallnet.com (8.12.3/8.12.2) with ESMTP id g3U4PIFQ066584 for ; Tue, 30 Apr 2002 00:25:19 -0400 (EDT) (envelope-from timothyk@mts-104.wallnet.com) Received: by mts-104.wallnet.com (8.12.3/8.12.3/Submit) id g3U4PHwY066583 for questions@freebsd.org; Tue, 30 Apr 2002 00:25:17 -0400 (EDT) Content-Type: text/plain; charset="us-ascii" From: Tim Kellers To: questions@freebsd.org Subject: kde3 icon Date: Mon, 29 Apr 2002 23:19:12 -0400 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204292319.12236.timothyk@wallnet.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After do considerable battle with kde3, I finally got the whole thing=20 installed (and working quite nicely). I use kde3 on my laptop (Dell Latitude C600, FreeBSD 4.5 -STABLE) and I h= ave=20 apm enabled. After the upgrade from kde 2.2.2 to kde3, my battery-monito= r=20 icon has gone bye-bye. The power control features still work, but I only= =20 have the generic "?" icon in the dock, where the battery-monitor icon sho= uld=20 be. Doesn anyone know, or could anyone point me to a resource, where the icon= =20 files for kde3 are installed to and from which port/package? I know this is a tiny thing, but this desktop is oh-so-close to being per= fect. TIA, Tim Kellers CPE/NJIT To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 21:43:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mts-104.wallnet.com (mts-104.wallnet.com [208.225.162.36]) by hub.freebsd.org (Postfix) with ESMTP id 1B76737B405 for ; Mon, 29 Apr 2002 21:43:04 -0700 (PDT) Received: from mts-104.wallnet.com (localhost [127.0.0.1]) by mts-104.wallnet.com (8.12.3/8.12.2) with ESMTP id g3U4h2FQ066668; Tue, 30 Apr 2002 00:43:02 -0400 (EDT) (envelope-from timothyk@mts-104.wallnet.com) Received: by mts-104.wallnet.com (8.12.3/8.12.3/Submit) id g3U4h2gY066667; Tue, 30 Apr 2002 00:43:02 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Tim Kellers To: Tim Kellers , Subject: Re: kde3 icon(s) and latter Kmail woes Date: Tue, 30 Apr 2002 00:43:02 -0400 X-Mailer: KMail [version 1.4] References: <20020429232717.S40045-100000@serv1.wallnet.com> In-Reply-To: <20020429232717.S40045-100000@serv1.wallnet.com> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200204300043.02207.timothyk@mts-104.wallnet.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok, so I know I'm replying to my own message, but.. Aftger a reinstall of kdenetwork3 from ports, the KMail demons have gone = away;=20 I'd still like to know how to make my battery icon come back, thouh. Tim Kellers CPE/NJIT On Monday 29 April 2002 11:31 pm, Tim Kellers wrote: > After doing considerable battle with kde3, I finally got the whole thin= g > installed (and working quite nicely). > > I use kde3 on my laptop (Dell Latitude C600, FreeBSD 4.5 -STABLE) and I > have > apm enabled. After the upgrade from kde 2.2.2 to kde3, my battery-moni= tor > icon has gone bye-bye. The power control features still work, but I on= ly > have the generic "?" icon in the dock, where the battery-monitor icon > should > be. > > Doesn anyone know, or could anyone point me to a resource, where the ic= on > files for kde3 are installed to and from which port/package? > > I know this is a tiny thing, but this desktop is oh-so-close to being > perfect. > > TIA, > > Tim Kellers > CPE/NJIT > > PS > > arrgh! Just when I thought everything (else) was working, I get this > message when I try to send from the Kmail e-mail client > > Sending failed: > Sendmail exited abnormally. > The message will stay in the 'outbox' folder until you either fix the > problem (e.g. a broken address) or remove the message from the 'outbox' > folder. > Note: Other messages will also be blocked by this message, as long as i= t > is in the 'outbox' folder > The following transport protocol was used: > Sendmail > > > Sendmail is working fine from the shell for me, any ideas (or hints) as= to > what (or why) Kmail is complaining about? > > Tim (again) > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 21:45:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mirapoint2.brutele.be (mirapoint2.brutele.be [212.68.193.7]) by hub.freebsd.org (Postfix) with ESMTP id C823F37B405 for ; Mon, 29 Apr 2002 21:45:48 -0700 (PDT) Received: from gateway.lefort.net ([213.189.162.78]) by mirapoint2.brutele.be (Mirapoint) with SMTP id AXE98213; Tue, 30 Apr 2002 06:45:45 +0200 (CEST) Received: from jsite.lefort.net (jsite.lefort.net [192.168.1.2]) by gateway.lefort.net (Postfix) with ESMTP id F4196153F5 for ; Tue, 30 Apr 2002 06:45:38 +0200 (CEST) Received: by jsite.lefort.net (Postfix, from userid 1000) id C825422EEB; Tue, 30 Apr 2002 06:45:36 +0200 (CEST) Date: Tue, 30 Apr 2002 06:45:36 +0200 From: Jean-Yves Lefort To: freebsd-questions@FreeBSD.org Subject: make buildworld fails Message-ID: <20020430064536.A48515@jsite.lefort.net> Mail-Followup-To: freebsd-questions@FreeBSD.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Since a few days, make buildworld (RELENG_4) fails: cc -O -pipe -DINFODIR=\"/usr/share/info:/usr/local/info:/usr/X11R6/info:.\" -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo -I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo/lib -static -o info dir.o display.o doc.o dribble.o echo-area.o filesys.o footnotes.o gc.o indices.o info-utils.o info.o infodoc.o infomap.o m-x.o man.o nodemenu.o nodes.o search.o session.o signals.o terminal.o tilde.o variables.o window.o -ltermcap /usr/obj/usr/src/i386/usr/src/gnu/usr.bin/texinfo/info/../libtxi/libtxi.a /usr/lib/libtermcap.a(lib_tgoto.o): In function `tgoto': lib_tgoto.o(.text+0x33b): undefined reference to `tparm' /usr/lib/libtermcap.a(lib_tputs.o): In function `delay_output': lib_tputs.o(.text+0x22): undefined reference to `napms' /usr/lib/libtermcap.a(comp_scan.o): In function `_nc_get_token': comp_scan.o(.text+0x142): undefined reference to `unctrl' comp_scan.o(.text+0x48e): undefined reference to `unctrl' comp_scan.o(.text+0x5cd): undefined reference to `unctrl' /usr/lib/libtermcap.a(comp_scan.o): In function `_nc_trans_string': comp_scan.o(.text+0x682): undefined reference to `unctrl' comp_scan.o(.text+0x81c): undefined reference to `unctrl' /usr/lib/libtermcap.a(captoinfo.o)(.text+0xaa0): more undefined references to `unctrl' follow /usr/lib/libtermcap.a(tty_update.o)(.text+0x747): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o)(.text+0x85a): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o): In function `doupdate': tty_update.o(.text+0xdf3): undefined reference to `_nc_signal_handler' tty_update.o(.text+0x10ca): undefined reference to `_nc_signal_handler' tty_update.o(.text+0x2928): undefined reference to `tparm' tty_update.o(.text+0x2c84): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o): In function `_nc_outstr': tty_update.o(.text+0x2fea): undefined reference to `tparm' tty_update.o(.text+0x36ab): undefined reference to `tparm' tty_update.o(.text+0x3b6f): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o)(.text+0x3c87): more undefined references to `tparm' follow /usr/lib/libtermcap.a(lib_window.o): In function `wcursyncup': lib_window.o(.text+0x326): undefined reference to `wmove' /usr/lib/libtermcap.a(lib_ttyflags.o): In function `reset_prog_mode': lib_ttyflags.o(.text+0x145): undefined reference to `_nc_set_buffer' /usr/lib/libtermcap.a(lib_ttyflags.o): In function `reset_shell_mode': lib_ttyflags.o(.text+0x196): undefined reference to `_nc_set_buffer' /usr/lib/libtermcap.a(init_keytry.o): In function `_nc_init_keytry': init_keytry.o(.text+0x50): undefined reference to `_nc_add_to_try' /usr/lib/libtermcap.a(lib_addch.o): In function `_nc_waddch_nosync': lib_addch.o(.text+0x7d): undefined reference to `unctrl' lib_addch.o(.text+0x2ed): undefined reference to `wclrtoeol' lib_addch.o(.text+0x335): undefined reference to `wclrtoeol' /usr/lib/libtermcap.a(lib_addch.o): In function `waddch': lib_addch.o(.text+0x4dc): undefined reference to `unctrl' lib_addch.o(.text+0x74d): undefined reference to `wclrtoeol' lib_addch.o(.text+0x7a5): undefined reference to `wclrtoeol' /usr/lib/libtermcap.a(lib_addch.o): In function `wechochar': lib_addch.o(.text+0x968): undefined reference to `unctrl' lib_addch.o(.text+0xbd9): undefined reference to `wclrtoeol' lib_addch.o(.text+0xc31): undefined reference to `wclrtoeol' *** Error code 1 1 error *** Error code 2 1 error *** Error code 2 1 error *** Error code 2 1 error *** Error code 2 1 error Any comments? Best regards, Jean-Yves Lefort -- * Jean-Yves Lefort -- jylefort@brutele.be -- http://lefort.homeunix.org/ * To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 23:27:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id AA3EA37B405 for ; Mon, 29 Apr 2002 23:27:27 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g3U6R7f08324; Mon, 29 Apr 2002 22:27:07 -0800 Message-Id: <200204300627.g3U6R7f08324@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: Mark Filipak , "Blane R. Boynton" Subject: Re: Disable Plug-n-play BIOS? (Was: Xircom CreditCard 10/100 Configuration) Date: Mon, 29 Apr 2002 22:27:07 -0800 X-Mailer: KMail [version 1.3.2] Cc: Lutz Horn , FreeBSD Questions References: <3CCDB001.55959F52@earthlink.net> In-Reply-To: <3CCDB001.55959F52@earthlink.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 12:41 pm, Mark Filipak wrote: > "Blane R. Boynton" wrote: > I'm a newbie and I'm am also having trouble. I remember reading somewhere > that the Plug-n-play BIOS feature should be turned *off*. I just checked > the Handbook and it appears to be silent on the issue. > > What is correct? Should the Plug-n-play BIOS setting be turned off? Its not Plug-n-play "Bios" you are speaking of, but rather the Plug-n-Play OS setting in the bios. Saying No to this, tells the bios to go ahead and configure any plug-n-play devices, rather than leaving it up to the OS. Many times with linux and bsd having the BIOS configure the cards was more successful than trying to get the os to do so. With PCI cards this is seldom an issue. With older isa cards it comes into play. I can't speak to the situation with 4.5, but older FreeBSDs didn't do the plug and play setup correctly for my crappy hardware. -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Apr 29 23:55:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from public.xf.hb.cn (public.xf.hb.cn [202.103.7.46]) by hub.freebsd.org (Postfix) with ESMTP id D1A0937B400 for ; Mon, 29 Apr 2002 23:55:43 -0700 (PDT) Received: from public.xf.hb.cn ([61.190.113.81]) by public.xf.hb.cn (8.9.3/3.7W-98100513) with SMTP id OAA05738; Tue, 30 Apr 2002 14:34:26 +0900 (CDT) Message-Id: Date: Tue, 30 Apr 2002 13:13:09 +0800 (CST) To: "alickbuck" From: cndem Reply-To: ahbbcom@cncorn.com Subject: =?GB2312?Q?=C8=AB=B9=FA=D7=EE=B5=CD=BC=DB=A3=BA150=D4=AA/=C4=EA=3D=B9=FA=BC=CA=D3=F2=C3=FB+300M=BF=D5=BC=E4+=D3=CA=BE=D6=A1=A3=B7=FE=CE=F1=C6=F7=CD=D0=B9=DC=207000=D4=AA/?= Organization: =?GB2312?Q?=CE=B4=D6=AA=B9=AB=CB=BE?= X-mailer: Trade-Navigator 5.7 [CN] X-Priority: 2 Mime-Version: 1.0 Content-Type: text/plain; charset="GB2312" Content-Transfer-Encoding: base64 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 1tC5+sPxzfgo1tC5+sPx1ve9qLn6u+Gw9rK6ytDOr9b3sOwpd3d3LmNuZGVt LmNvbSAgIA0KDQq3/s7xxvfN0LncIKOstNnP+rTZz/rIq7n61+61zbzbo7o3 MDAw1KovxOoNCrPP1ffIq7n6uPe12LT6wO2jrLu2062808PLo6y5srS0zrTA tCAgICAgIM/IytTTw6GhuvO4tr/uDQoNCjEuIDE1MNSqo70xxOq5+rzK0/LD +6OrMzAwbWKjqzIwuPZlbWFpbA0KMi4gMjgw1KqjvTHE6rn6vMrT8sP7o6s4 MG1io6syMLj2ZW1haWwo1qez1mNnaSmjuw0KMy4gNDUw1KqjvTHE6rn6vMrT 8sP7o6syMDBtYqOrMjC49mVtYWlsKNans9ZjZ2kpo7sNCjQuIDY4MNSqo70y xOq5+rzK0/LD+6OrMjAwbWKjqzMwuPZlbWFpbChhc3ChonBocCmjuw0KNS4g NTYw1KqjvTHE6rn6vMrT8sP7o6szMDBtYqOrMzC49mVtYWlsKGFzcKGicGhw KaO7DQo2LiA4ODDUqqO9MsTqufq8ytPyw/ujqzMwMG1io6s0MLj2ZW1haWwo YXNwoaJwaHApIA0KNy4gMzUwMNSqLzHE6tDNLDJHv9W85KOstOa3xTQ1uPbV vrXjLDUwuPZlbWFpbKOs19TW+rncwO0NCg0K1tC5+sPxzfgod3d3LmNuZGVt Lm5ldCB3d3cuY25kZW0uY29tKdDpxOLW97v6o6zL2bbIv+yhorzbuPG1zaOs sbG+qbXn0MW3/s7xxvejrA0KDQrDv8zssru1vcj9vcfHrqOs07XT0NPyw/uh os341b6hotPKvtajrMzYsfDKytPD09rW0NChxvPStaGiuPbIy72owaLN+MnP 1q680g0KDQqhoaGhoaGhoaGhoaGhoaGhoaHW97v6zdC53KGhDQoNCiDS1M/C ysfW97v6zdC53Lywt/7O8cb31+LTw7XEz/rK29DFz6KjrMjnzt7Qy8iko6y8 tL/Myb6z/aOsw7DDwbTyyMXN8s37uqO6raGjDQogICAgztK5q8u+1f3U2r+q 1bnS1M/Cwb3W1tK1zvG1xNPFu9202c/6o7oNCtK7oaK3/s7xxvfN0LncILTZ z/q827jxo7o2NTAw1KovxOoozt7IzrrOuL2807fR08MpDQogICAgICAgICC5 ss/tMTAwTbT4v+0NCiAgICAgICAgILXn0MW8trv6t78NCiAgICAgICAgILK7 z97K/b7dwffBvw0KICAgICAgICAgw+K30czhuam7+rzcDQogICAgICAgICDD 4rfRzOG5qTG49klQtdjWtw0KICAgICAgICAgNyoyNM+1zbO53MDt1qez1g0K ICAgICAgICAgy6u158K3K1VQU8+1zbMNCiAgICAgICAgINS2s8y53MDtvLzK 9cXg0bW8sMirzNfQ6cTi1ve7+tans9bT68Xg0bUNCiAgICAgICAgINT5y825 +rzK0/LD+9K7uPYNCrb+oaK3/s7xxvfV+7v61+LTw6O6tNnP+rzbuPGjujEy MDAw1KovxOogu/IgMjAwMDDUqi8yxOqyotT5y823/s7xxvehow0KICAgICAg ICAgzOG5qUludGVsIFA0IDEuNke3/s7xxvcNCiAgICAgICAgIDUxMk1CIFJB TQ0KICAgICAgICAgMjBHQiBFSURFIERyaXZlDQogICAgICAgICBEVUFMIDEw LzEwME1icHMgQkFTRS1UDQogICANCtLUyc/Stc7xo6y4+b7dxPq1xNDo0qqj rLbU08O7p6Osv8nS1MzhuanD4rfRsLLXsLf+zvGjrLD8wKijug0KICAgICAg ICAgIEZUULf+zvHG9w0KICAgICAgICAgIFdXV7f+zvHG9w0KICAgICAgICAg INPKvP63/s7xxvcNCiAgICAgICAgICBETlO3/s7xxvcNCiAgICAgICAgICDU trPMv9jWxrncwO2jrLXItcguDQrP6sfpx+u3w87Ko7podHRwOi8vV1dXLkNO REVNLkNPTQ0KyMjP37Xnu7CjujA1NTItMjA1NjI5NNeqMg0KRW1haWw6ICAg IHdlYm1hc3RlcjNAY25kZW0ubmV0DQoNCiAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgw/G9qM34wue/xry8t6LVudPQz965q8u+DQrXoqO6tMvTyrz+ 1ru3otK7tM6jrMjn09C08sjFo6zN8s37uqO6raGjICAgDQo= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 0:11:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe50.law10.hotmail.com [64.4.14.22]) by hub.freebsd.org (Postfix) with ESMTP id A4CBD37B405 for ; Tue, 30 Apr 2002 00:11:46 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 Apr 2002 00:11:46 -0700 X-Originating-IP: [151.201.31.236] From: "Nader Turki" To: Subject: hard drives Date: Tue, 30 Apr 2002 03:11:48 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0179_01C1EFF4.C4047650" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 30 Apr 2002 07:11:46.0578 (UTC) FILETIME=[4A12D720:01C1F016] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0179_01C1EFF4.C4047650 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable hi there, my question have nothing to do with freebsd really but since i'm a = freebsd user and always get help from freebsd's mailling lists i thought = i'll ask and get ideas. i have a machine ... amd athlon 1333MHz (266FBS) with 256mb DDR PC2100 = and a 30GB ATA100 7200RPM HD. i run winxp, freebsd 4.x-STABLE and redhat 7.2 on it. i just bought few parts from a friend cause he wanna get a new machine = .... i got his ram and hd. so my new machine will be a AMD Athlon 1333MHz (266MHz FB), 512MB DDR = PC2100, 60GB 7200RPM (ATA/100)... i was thinking to use both 30gb and = 60gb .... so what do you guys suggest .... have which one as master and = which as slave ..... i was thinking to do this .... use 60gb as master and have winxp running on it and the 30gb as slave = and run both FreeBSD abd Red Hat .... cause i reinstall fbsd and rh all = the time and try new things .... so that way i won't mess with my new = HD. if any of you think i should do it another way please let me know. i'm = sure that there are pro's on this list who knows way more than me about = pc's and os's :) hope to hear from you guys, thanks, --Nader ------=_NextPart_000_0179_01C1EFF4.C4047650 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
hi there,
 
my question have nothing to do with = freebsd really=20 but since i'm a freebsd user and always get help from freebsd's mailling = lists i=20 thought i'll ask and get ideas.
 
i have a machine ... amd athlon 1333MHz = (266FBS)=20 with 256mb DDR PC2100 and a 30GB ATA100 7200RPM HD.
i run winxp, freebsd 4.x-STABLE and = redhat 7.2 on=20 it.
 
i just bought few parts from a friend = cause he=20 wanna get a new machine .... i got his ram and hd.
 
so my new machine will be a AMD Athlon = 1333MHz=20 (266MHz FB), 512MB DDR PC2100, 60GB 7200RPM (ATA/100)... i was thinking = to use=20 both 30gb and 60gb .... so what do you guys suggest .... have which one = as=20 master and which as slave .....
 
i was thinking to do this = ....
 
use 60gb as master and have winxp = running on it and=20 the 30gb as slave and run both FreeBSD abd Red Hat .... cause i = reinstall fbsd=20 and rh all the time and try new things .... so that way i won't mess = with my new=20 HD.
 
if any of you think i should do it = another way=20 please let me know. i'm sure that there are pro's on this list who knows = way=20 more than me about pc's and os's :) hope to hear from you = guys,
 
thanks,
 
--Nader
------=_NextPart_000_0179_01C1EFF4.C4047650-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 0:23:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.185.177]) by hub.freebsd.org (Postfix) with ESMTP id F0F0637B400 for ; Tue, 30 Apr 2002 00:23:56 -0700 (PDT) Received: from terrapin.intersonic.se (terrapin.i.inter-sonic.com [192.168.1.9]) by neonpark.inter-sonic.com (8.11.4/8.11.4) with ESMTP id g3U7Nsf18379 for ; Tue, 30 Apr 2002 09:23:55 +0200 (CEST) Message-Id: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> X-Sender: peo@mail.inter-sonic.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 30 Apr 2002 09:23:53 +0200 To: freebsd-questions@FreeBSD.org From: Per olof Ljungmark Subject: pdf's in ftp.freebsd.org/pub/FreeBSD/doc/handbook/ Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm unable to open any of the handbook pdf's. Am I missing something here? I have Acrobat version 4. Thanks, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 0:38:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.webtrade.it (www.gandellini.it [212.78.71.53]) by hub.freebsd.org (Postfix) with ESMTP id E543037B405 for ; Tue, 30 Apr 2002 00:38:22 -0700 (PDT) Received: from moreno ([217.141.26.2]) by ns1.webtrade.it (8.10.2/8.10.2) with SMTP id g3U7Ood30887 for ; Tue, 30 Apr 2002 08:24:50 +0100 From: "Riccardi Moreno" To: Subject: FreeBSD Network Date: Tue, 30 Apr 2002 09:34:45 +0200 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I've installed freebsd 4.5 on i386, i know how to share his data from Windows but i don't know how to share data from windows to unix. There are some ports that help me to view windows, or other unix shares? Thanks in advance -------------------------------------------- - Moreno Riccardi - www.webtrade.it -------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 0:51:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id F396A37B404 for ; Tue, 30 Apr 2002 00:51:04 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g3U7oor08714; Mon, 29 Apr 2002 23:50:50 -0800 Message-Id: <200204300750.g3U7oor08714@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: "Nader Turki" , Subject: Re: hard drives Date: Mon, 29 Apr 2002 23:50:50 -0800 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 11:11 pm, Nader Turki wrote: > .... so what do you guys suggest .... have which one as master and which as > slave ..... > > i was thinking to do this .... > > use 60gb as master and have winxp running on it and the 30gb as slave and > run both FreeBSD abd Red Hat .... Always have the NEWEST drive as master. But avoid master+slave if possible when you expect concurent access (which it does not sound like you do). If you have more than 2 IDE ports (such as two fast ones and two slow ones) put one drive on each of the two fast ones and hang the CD on the slow ones. (If your mobo won't support 4 you can get a cheap ide card for about $20). -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 0:56:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id D5B1D37B404 for ; Tue, 30 Apr 2002 00:56:19 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g3U7u4608744; Mon, 29 Apr 2002 23:56:04 -0800 Message-Id: <200204300756.g3U7u4608744@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: "Riccardi Moreno" , Subject: Re: FreeBSD Network Date: Mon, 29 Apr 2002 23:56:04 -0800 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Monday 29 April 2002 11:34 pm, Riccardi Moreno wrote: > Hi all, > I've installed freebsd 4.5 on i386, i know how to share his data from > Windows but i don't know how to share data from windows to unix. There are > some ports that help me to view windows, or other unix shares? > Thanks in advance man mount_smbfs -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 1:48: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.wananchi.com (ns2.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 5E01737B41A for ; Tue, 30 Apr 2002 01:48:02 -0700 (PDT) Received: from wash by ns2.wananchi.com with local (Exim 3.36 #1 (FreeBSD)) id 172TIc-0004ke-00 for ; Tue, 30 Apr 2002 11:47:50 +0300 Date: Tue, 30 Apr 2002 11:47:50 +0300 From: Odhiambo Washington To: FBSD-Q Subject: Toshiba Satellite 1670CDS + FREEBSD Woes Message-ID: <20020430084749.GQ66193@ns2.wananchi.com> Mail-Followup-To: Odhiambo Washington , FBSD-Q Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.25i X-Disclaimer: Any views expressed in this message,where not explicitly attributed otherwise, are mine alone!. X-Fortune: The rhino is a homely beast, For human eyes he's not a feast. Farewell, farewell, you old rhinoceros, I'll stare at something less prepoceros. -- Ogden Nash X-Operating-System: FreeBSD 4.5-STABLE i386 X-Best-Window-Manager: Blackbox X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 11:31AM up 2 days, 22:51, 2 users, load averages: 0.25, 0.40, 0.38 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hiya gang, I am having a problem with a Toshiba laptop here and I hope one of you can help in advising. This laptop has given me enough issues and refused to run Winblows - it just hangs or complains about himem.sys, VxD errors (whetever those are). So I decided to install FreeBSD from CD. This is a 4.4-RELEASE CD. Three times it panicked while loading the kernel and rebooted immediately/spontaneously. Now I have an error on the screen when booting from 4.4 CD: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x3a fault code = supervisor write, page not present instruction pointer = 0x8 :0xc02a1eef stack pointer = 0x10 :0xc06b8dec frame pointer = 0x10 :0xc06b8e8c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL - 0 current process = Idle interrupt mask = net tty bio cam trap number = 12 panic: page fault Uptime: 0s Could this be a device problem? Memory?? Thanks in advance -Wash -- Odhiambo Washington "The box said 'Requires Wananchi Online Ltd. www.wananchi.com Windows 95, NT, or better,' Tel: 254 2 313985-9 Fax: 254 2 313922 so I installed FreeBSD." GSM: 254 72 743 223 GSM: 254 733 744 121 This sig is McQ! :-) "I gained nothing at all from Supreme Enlightenment, and for that very reason it is called Supreme Enlightenment." -- Gotama Buddha To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:21: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cerebellum.za.net (cerebellum.za.net [196.34.172.103]) by hub.freebsd.org (Postfix) with ESMTP id 026EB37B41C for ; Tue, 30 Apr 2002 02:21:02 -0700 (PDT) Received: from bertlaptop (vic-dial-196-30-239-51.mweb.co.za [196.30.239.51]) by cerebellum.za.net (8.11.6/8.11.3) with SMTP id g3U9Qhh80175 for ; Tue, 30 Apr 2002 09:26:44 GMT (envelope-from ian@cerebellum.za.net) Message-ID: <01c701c1f028$c546e3c0$48ef1ec4@bertlaptop> From: "Ian Barnes" To: Subject: cclient Date: Tue, 30 Apr 2002 11:24:00 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i have a question ... i am trying to compile cclient with ssl support ... yet i cant get it right. /usr/ports/mail/cclient i need it for imp ... anyone know how to compile it with ssl support ... i have tried --with_ssl ... --with-ssl and i still cant get it to compile... thankz ian barnes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:57:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from SRDMAIL.SINP.MSU.RU (bigking.sinp.msu.ru [213.131.9.130]) by hub.freebsd.org (Postfix) with ESMTP id C9C2C37B42A for ; Tue, 30 Apr 2002 02:57:45 -0700 (PDT) Received: from dima (helo=localhost) by SRDMAIL.SINP.MSU.RU with local-esmtp (Exim 3.34 #1) id 172UNx-000OtC-00 for freebsd-questions@FreeBSD.org; Tue, 30 Apr 2002 13:57:25 +0400 Date: Tue, 30 Apr 2002 13:57:25 +0400 (MSD) From: Dmitry Mottl To: freebsd-questions@FreeBSD.org Subject: FreeBSD patch level Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, What is a patch level for FreeBSD release? I dont' find any CVS tags that corresponds to release patches. For example, what is 4.4-RELEASE-p11 and where I can get it? ps. Please note, I don't ask about 4.4-STABLE, I'm asking about 4.4-RELEASE-p11 Thanks! - Dmitry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:58:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 8F23037B416 for ; Tue, 30 Apr 2002 02:58:07 -0700 (PDT) Received: from freebsd.localhost.local (localhost.local [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3T4tmJ03822; Sun, 28 Apr 2002 21:55:49 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Sun, 28 Apr 2002 21:55:48 -0700 From: Nathan KInkade To: questions@freebsd.org Cc: nthomas@cise.ufl.edu Subject: Re: building ports *outside* /usr Message-Id: <20020428215548.65066eff.nkinkade@dsl-only.com> In-Reply-To: <20020429042001.GA28503@cise.ufl.edu> References: <20020429042001.GA28503@cise.ufl.edu> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, 29 Apr 2002 00:20:01 -0400 "N. Thomas" wrote: > I have regular-user access to a FreeBSD box and I would like to build some > software which is available through the ports tree. I downloaded the latest > ports sub-dir from the ftp site and try to build it in my home directory and > it doesn't work. > > I can't even build the simplest package, so I'm suspecting it is a result of > doing this outside of /usr/ports. > > What is the best way to do this, i.e. is there documentation available for > compiling packages outside /usr/ports? from: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html "Note: You must be the root user to install ports." there may be other reasons of which i'm not aware, but it seems that at least nominally, as a regular user, you will not have proper permission to read/write various directories where the application expects...such as directories where config files expect to be stored or where other shared objects may be located. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:58:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id D55A537B425 for ; Tue, 30 Apr 2002 02:58:14 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3QGQ9P01769; Fri, 26 Apr 2002 09:26:14 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Fri, 26 Apr 2002 09:26:09 -0700 From: Nathan To: gabriel_ambuehl@buz.ch Cc: questions@freebsd.org Subject: Re: Re[2]: dhclient going crazy... Message-Id: <20020426092609.2ce17e4c.nkinkade@dsl-only.com> In-Reply-To: <172180938515.20020426154645@buz.ch> References: <1965488492.20020424150235@buz.ch> <3CC86D86.7060100@potentialtech.com> <158162746907.20020426104334@buz.ch> <3CC95A01.5000908@potentialtech.com> <172180938515.20020426154645@buz.ch> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 26 Apr 2002 15:46:45 +0200 Gabriel Ambuehl wrote: > -----BEGIN PGP SIGNED MESSAGE----- > > Hello Bill, > > Friday, April 26, 2002, 3:45:37 PM, you wrote: > >> DoS but thought that there might be a bug in the dhclient. > > Did you reboot the box? FreeBSD isn't very prone to binary > > corruption, but (theoretically) it's still possible. I wouldn't > > blame dhclient itself, though, as I've run it for years with no > > problems. If your dhclient is acting up you probably need to do > > buildworld again. > > That I had already scheduled but postponed it until I could > run cvsup again. We'll see how it's going once I'm finished with it. > > >> Actually, there's a whole lot of those ARP changes for the GW, > >> could it be that dhclient went crazy about it? > > dhclient shouldn't have any reason to change MAC addresses. > > Yeah sure but the DHCP *server* changed its... > > >> That's originally what I expected to be the reason too but the NOC > >> guy > >> told me that they're running with 60min leases. > > Yeah, but remember that you're running things in a sane manner, and > > if they (for some unknown reason) went wacko, you'd think that it > > must be the other guy as well. > > Oh we all are familiar with the fact that this industry does even > more > fingerpointing than most others... > > > my first reaction is "what did you break" (because usually that's > > true) Then later I find that my systems are wacked out. Only > > Yeah I know. But as I'm admin myself, I wanted to speak with the NOC > guys which the helpdesk wouldn't let me do, stating they haven't got > the number of the NOC anyway... > > > difference is that I'll admit my mistake to the customer. > > ACK (maybe not if the mistake really was too stupid ;-) > > >> Neither did I. The box in question has a somewhat doubtful > >> internal (dc0) interface that would generate watchdog alerts from > >> time to time since a few week but despite it was running for more > >> than a year without a single problem. I sure did upgrade it from > >> time to time but as STABLE really is stable for the very most > >> part, I never ever > >> encountered any trouble while on it... > > Well, definately take a minute to email me if you ever figure > > it out. I'd be curious to know what's up. > > Will sure post it to the list as others seem to be interested also. Do you have a protocol analyzer, like ethereal, that you could run when this happens - or possibly you could setup rules and run it all the time for a while? I'm wondering if there is any other strange activity that's just not getting logged by dhclient. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:58:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id BAA5437B400 for ; Tue, 30 Apr 2002 02:58:08 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3S16OJ00577; Sat, 27 Apr 2002 18:06:25 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Sat, 27 Apr 2002 18:06:24 -0700 From: Nathan To: "Maicon Stihler" Cc: freebsd-questions@freebsd.org Subject: Re: the best window manager Message-Id: <20020427180624.1a259912.nkinkade@dsl-only.com> In-Reply-To: <001801c1ecac$b5bee080$61e487c8@LocalHost> References: <001801c1ecac$b5bee080$61e487c8@LocalHost> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 25 Apr 2002 19:58:22 -0300 "Maicon Stihler" wrote: > Hi, > I was wondering what wm should I install on my FBSD box. I need something that is easy to configure and that is customizable, fast and with a clean look. I like the Icewm, but I dont know any tool to configure the menus and the look and feel of it. Does anybode have an opinion about it? note. I dont like kde :) > I second the previous messages - try Blackbox. I had been using KDE up until a week or two ago when I realized that I just didn't need about 99% of the things that KDE was offering. I tried AfterStep but hated the Dock, then I tried FVWM, now I'm with Blackbox. My main complaint with FVWM is the long, and fairly involved, config file(s). Blackbox was just what I wanted right out of the "box", no pun intented. I installed a couple little helper utils to top it off - bbkeys (key bindings) and bbpager (desktop pager). So far I'm thrilled with Blackbox. My only small complaint is that now and then bbkeys seems to hiccup and I lose keyboard control in Opera for a period, but this is infrequent and it can be resolved (for whatever reason) by opening-->closing bbconf (a gui config util). I haven't tried Fluxbox. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:58:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id B590037B405 for ; Tue, 30 Apr 2002 02:58:03 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3TKTmJ05389; Mon, 29 Apr 2002 13:29:59 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Mon, 29 Apr 2002 13:29:48 -0700 From: Nathan KInkade To: Anton Shcherbinin Cc: freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it? Message-Id: <20020429132948.3f0177ae.nkinkade@dsl-only.com> In-Reply-To: <1411696390.20020428231738@fastmail.fm> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002 23:17:38 +0400 Anton Shcherbinin wrote: > Sunday, April 28, 2002, 5:15:39, Greg 'groggy' Lehey wrote: > > > On Saturday, 27 April 2002 at 16:32:28 -0400, Joe & Fhe Barbish wrote: > >> On Saturday, April 27, 2002 1:36 PM, Anton Shcherbinin wrote: > >>> > >>> I installed FreeBSD 4.5 Release. When my host is trying to connect to > >>> any other host specified by name, I experience a huge (1.5 minutes) > >>> delay before the hosts are connected. For example, suppose I want to get > >>> http://yahoo.com/ page. I write: > >>> > >>> $ telnet yahoo.com 80 > >>> > >>> At the same time (actually, a bit earlier), I wrote at another console > >>> as root: > >>> > >>> # tcpdump -n > >>> > >>> And here is tcpdump's output (a bit edited for clarity): > >>> > >>> 18:37:51.501962 my_host.1055 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:37:56.512212 my_host.1056 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:06.522353 my_host.1057 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:38:26.532655 my_host.1058 > our_DNS_server.53: 4486+ AAAA? yahoo.com. (27) > >>> 18:39:06.543281 my_host.1059 > our_DNS_server.53: 4487+ A? yahoo.com. (27) > >>> 18:39:06.683069 our_DNS_server.53 > my_host.1059: 4487* 2/5/5 A 66.218.71.113, (238) > >>> 18:39:06.683609 my_host.1028 > yahoo.com.80: S 2162865409:2162865409(0) win 65535 (DF) [tos 0x10] > >>> 18:39:06.909922 yahoo.com.80 > my_host.1028: S 2552035614:2552035614(0) ack 2162865410 win 65535 > >>> 18:39:06.909984 my_host.1028 > yahoo.com.80: . ack 1 win 33304 (DF) [tos 0x10] > >>> > >>> That is, my host tries to resolve yahoo.com at our DNS server, *but* it > >>> looks for 'AAAA' RR, and not 'A'. It gets no reply, and in 5 seconds it > >>> retries the query (again, 'AAAA' RR). No reply again, it retries in 10 > >>> seconds, then again in 20 seconds. No reply within 40 seconds. > >>> *FINALLY*, my host asks DNS server for 'A' RR for yahoo.com . And no > >>> wonder that in several milliseconds DNS server tells my host yahoo.com's > >>> IP address. Then, within several milliseconds, my host and yahoo.com > >>> become TCP-connected. > >>> > >>> As you can see, I had to waste 5+10+20+40==75 seconds watching my host > >>> try to find nonexistent AAAA resource record. And things are the same if > >>> I try to send mail or to connect to ftp site or whatever else. > >>> > >>> What have I done wrong? What should I do? Thanks a lot for any ideas. > >>> > >>> I general, what are AAAA records? RFC1034/1035 say nothing about > >>> such RR. What TFM should I read about them? > > > They're address records for IPV6. > > Thank you, Greg. It makes things much clearer. > > > So what's the problem? I really don't know. Does this only happen > > with telnet? Only with yahoo.com? > > As I have already said, the same happens with any application and any > host. E. g., with ftp and ftp.freebsd.org : > 1) my host queries our DNS server for AAAA record of ftp.freebsd.org > 2) query times out in 5 secs > 3) the same query > 4) query times out in 10 secs > 5) the same query > 6) query times out in 20 secs > 7) the same query > 8) query times out in 40 secs > 9) the same query, *but* for A record; DNS server replies in some ms, > and then everything goes great, my host quickly connects > to ftp.freebsd.org:21 etc. > > How can I fix that? > > The only thing I could think of is to disable IPv6 at all. But wait a > second: > > $ grep -i ipv6_enable /etc/rc* /etc/defaults/* > /etc/rc:case ${ipv6_enable} in > /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. > > ^^^^^^^^^^^^^^^^ > Does not it mean that IPv6 is already disabled? > > On the other hand: > $ ifconfig -u > rl0: flags=8843 mtu 1500 > inet 10.10.10.9 netmask 0xffffff00 broadcast 10.10.10.255 > inet6 fe80::2c0:26ff:fea5:b640%rl0 prefixlen 64 scopeid 0x1 > ether 00:c0:26:a5:b6:40 > media: Ethernet autoselect (100baseTX ) > status: active > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > > Both interfaces have IPv6 (inet6) addresses. > > I deal with IPv6 the 1st time in my life. I just understand nothing. > :-( > What should I do? I am ready to give you any additional info about my > FBSD configuration. Many thanks in advance. since it hasn't been put out yet, might it work to remove IPV6 from the kernel altogether by commenting out the follwing line in your kernel config file and then recompiling the kernel? I'm running 4.5-stable from releng_4_5 and I've had that line commented out for a month or two now and haven't seemed to have any problems. then again, i never really had any problems when it was there in the first place so this point may be irrelevant? options INET6 #IPv6 communications protocols To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:59:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 3479937B421 for ; Tue, 30 Apr 2002 02:58:11 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3R63QP05779; Fri, 26 Apr 2002 23:03:26 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Fri, 26 Apr 2002 23:03:26 -0700 From: Nathan To: philphil Cc: freebsd-questions@freebsd.org Subject: Re: Mounting Linux and Windows Volumes in FreeBSD-Is this doable? Message-Id: <20020426230326.320dce57.nkinkade@dsl-only.com> In-Reply-To: <5.1.0.14.0.20020427012549.00a74dc0@pop3.norton.antivirus> References: <5.1.0.14.0.20020427012549.00a74dc0@pop3.norton.antivirus> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 27 Apr 2002 01:26:27 -0400 philphil wrote: > "Nathan" wrote in message > news:<20020426190912.6f5eac0c.nkinkade@dsl-only.com>... > >On Fri, 26 Apr 2002 20:36:23 -0400 > >"philphil" wrote: > > > Hi FreeBSDers: > > > > I want to copy some files over from the Windows and Linux partitions > > in the > > > same box to FreeBSD. > >for mounting dos(windows) filesystems see > >$ man mount_msdos > >for mounting linux filesystems (probably) see > >$ man mount_ext2fs >> My problem is the Mandrake 8.1 partition is a Reiser File system. >> Am I out of luck? >> >> Phil Wong probably: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=732535+0+archive/2001/freebsd-questions/20010909.freebsd-questions To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 2:59:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id E499737B41B for ; Tue, 30 Apr 2002 02:58:12 -0700 (PDT) Received: from freebsd.localhost.local (localhost.localdomain [127.0.0.1]) by freebsd.localhost.local (8.11.6/8.11.6) with SMTP id g3R5IZP05721; Fri, 26 Apr 2002 22:18:36 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Fri, 26 Apr 2002 22:18:35 -0700 From: Nathan To: VB Cc: freebsd-questions@freebsd.org Subject: Re: vnc lameness Message-Id: <20020426221835.6d6e2047.nkinkade@dsl-only.com> In-Reply-To: <20020426204439.B713@sunny.localdomain> References: <20020426204439.B713@sunny.localdomain> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 26 Apr 2002 20:44:40 -0700 VB wrote: > Hi, > > On a 3 computer network (1 FBSD and 2 W2K) VNC works fine to W2K from W2K both ways on both machines, but I cannot access FBSD via VNC from W2K, nor can I access W2K from FBSD. > > I am ashamed because it should be rather simple. > > I am cvsuped to 4.4 Release, I started vncserver and ps says its running. Also, vncviewer brings up the diaglogue in X just as it should, but typing in a valid address does not work and no error messages are returned. From W2K viewer, the error message returned is "cannot connect to server." what display# is VNC running on? you should be able to see this when looking at the process....the number after the color, like 'Xvnc :1' when you are pointing your win2k machine at the FreeBSD box are you specifying to connect to the display on which VNC is listening? if you're FreeBSD box is at 10.0.0.1, for example, then you should point your win2k box at 10.0.0.1:1 - that is, assuming that your VNC server is running on display 1. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 3:14: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from n15.grp.scd.yahoo.com (n15.grp.scd.yahoo.com [66.218.66.70]) by hub.freebsd.org (Postfix) with SMTP id 1677F37B41D for ; Tue, 30 Apr 2002 03:13:50 -0700 (PDT) X-eGroups-Return: confirm-return-freebsd-questions=FreeBSD.ORG@yahoogrupos.com.br Received: from [66.218.66.97] by n15.grp.scd.yahoo.com with NNFMP; 30 Apr 2002 10:13:49 -0000 Received: (qmail 68323 invoked by uid 7800); 30 Apr 2002 10:13:49 -0000 Date: 30 Apr 2002 10:13:49 -0000 Message-ID: <1020161629.108.68322.m14@yahoogrupos.com.br> From: Yahoo!Grupos Reply-To: confirm-s2-kiCmVw6dTAc_N4ZI002i78gE7=Q-freebsd-questions=FreeBSD.ORG@yahoogrupos.com.br To: freebsd-questions@FreeBSD.ORG Subject: Confirmar sua assinatura do grupo fug_sp_br MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ol=E1, Recebemos seu pedido de associa=E7=E3o ao grupo fug_sp_br do Yahoo! Grupos.= Para tornar-se um associado do grupo fug_sp_br,=20 confirme seu pedido respondendo a esta mensagem. Fa=E7a isto usando a fun= =E7=E3o de=20 resposta do seu programa de e-mail. Seu endere=E7o de e-mail correto ser=E1= =20 inserido automaticamente. Se voc=EA n=E3o solicitou, ou n=E3o quer solicitar, uma associa=E7=E3o no g= rupo fug_sp_br, por favor aceite nossas desculpas e ignore esta mensagem. Atenciosamente, Atendimento ao usu=E1rio Yahoo! Grupos P.S. Se voc=EA quiser saber mais sobre o grupo fug_sp_br,=20 visite http://br.groups.yahoo.com/group/fug_sp_br=20 O uso do Yahoo! Grupos =E9 sujeito aos termos de servi=E7o contidos em http= ://br.yahoo.com/info/utos.html=20 =20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 3:19:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from crucible.athame.co.uk (guru164.netsonic.fi [194.29.193.164]) by hub.freebsd.org (Postfix) with ESMTP id B82B837B400 for ; Tue, 30 Apr 2002 03:19:23 -0700 (PDT) Received: from pc38.net18.ktv.koping.se ([195.163.18.38] helo=minihopp.internal.hasta.se) by crucible.athame.co.uk with esmtp (Exim 3.33 #1) id 172UjB-0001PY-00 for freebsd-questions@freebsd.org; Tue, 30 Apr 2002 13:19:21 +0300 From: Lauri Watts To: freebsd-questions@freebsd.org Subject: Re: mosfet liquid Date: Tue, 30 Apr 2002 12:25:10 +0200 User-Agent: KMail/1.4.5 References: <200204300120.49774.thomaswuerfl@gmx.de> In-Reply-To: <200204300120.49774.thomaswuerfl@gmx.de> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200204301225.10859.lauri@kde.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 01.20, Thomas Wuerfl wrote: > Hi all, > > I tried to install mosfet-liquid-0.9.4 from the ports. I got this error: > > gmake[1]: aclocal: Command not found > gmake[1]: *** [cvs] Error 127 > gmake: *** [all] Error 2 > *** Error code 2 > > Stop in /usr/ports/x11-wm/mosfet-liquid. > > Did anybody tried also? I want to be sure that it doesn't depend > on my system only. I'm running current from Friday. > I know there aren't many FreeBSD-KDE users out there ;-) What makes you say that? There's plenty. http://freebsd.kde.org, and the rather active mailing list. In any case, the mosfet-liquid ports were updated over the weekend, to fix= =20 some autoconf/automake issues, cvsup your ports tree and try again. =2D-=20 Lauri Watts To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 3:46:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20810.mail.yahoo.com (web20810.mail.yahoo.com [216.136.226.199]) by hub.freebsd.org (Postfix) with SMTP id 3EE5B37B416 for ; Tue, 30 Apr 2002 03:46:35 -0700 (PDT) Message-ID: <20020430104634.37682.qmail@web20810.mail.yahoo.com> Received: from [61.1.246.43] by web20810.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 03:46:34 PDT Date: Tue, 30 Apr 2002 03:46:34 -0700 (PDT) From: ARUN G NAIR To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="0-1565641305-1020163594=:37677" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0-1565641305-1020163594=:37677 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello all, There are a few doubts that i have about the installation.i have attached the query to this mail.kindly reply. __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com --0-1565641305-1020163594=:37677 Content-Type: text/plain; name="Query.txt" Content-Description: Query.txt Content-Disposition: inline; filename="Query.txt" Conflicts/Sharing -------------------- I/O Port 0x00000000-0x00000CF7 PCI bus I/O Port 0x00000000-0x00000CF7 Direct memory access controller IRQ 5 CMI8738/C3DX PCI Audio Device IRQ 5 Intel(r) 82801AA USB Universal Host Controller Memory Address 0xA0000-0xBFFFF PCI bus Memory Address 0xA0000-0xBFFFF Intel(r) 82810E Graphics Controller I have a P III 855MHz on Mercury 810e FSFx motherboard ,128MB RAM,onboard sound (CMI8738),an onboard modem which i have disabled in the BIOS,20GB HDD,1.44MB FDD and no other extra things such as AGP or Sound card.I am not connected to any network and am an end user.I have no USB devices.I have a printer on the parallel port.When i opened the system info in Windows XP it showedthe above conflicts in the conflicts/sharing section.I am going to install FBSD 4.5 on my system and i read in the installation manual that any conflicts may hinder the working of FBSD.Will i be able to install FBSD ?What should i do to avoid these conflicts when installing FBSD ?Will FBSD work on my system properly ?My onboard sound card is supported by FBSD,but will i be able to make it work as it uses the same IRQ with the USB Controller.Is their any harm in disabling the USB controller and if so, how to do it? The onboard modem too had a conflict but when i disabled it in the BIOS the conflict wasn't there.Will it make any problems when installing FBSD ?I am also going to buy an internal modem.Will it cause any problems after the installation?Please reply to this as soon as possible.Thanx in advance. Below i have given the other information that i have found from the system info in my windows box ( thought this might help you) Hardware Resources:- ================= Resource Device Status ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ I/O ------- 0x00000000-0x00000CF7 PCI bus OK 0x00000000-0x00000CF7 Direct memory access controller OK 0x00000010-0x0000001F Motherboard resources OK 0x00000020-0x00000021 Programmable interrupt controller OK 0x00000022-0x0000003F Motherboard resources OK 0x00000040-0x00000043 System timer OK 0x00000044-0x0000005F Motherboard resources OK 0x00000060-0x00000060 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK 0x00000061-0x00000061 System speaker OK 0x00000062-0x00000063 Motherboard resources OK 0x00000064-0x00000064 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK 0x00000065-0x0000006F Motherboard resources OK 0x00000070-0x00000073 System CMOS/real time clock OK 0x00000074-0x0000007F Motherboard resources OK 0x00000080-0x00000090 Direct memory access controller OK 0x00000091-0x00000093 Motherboard resources OK 0x00000094-0x0000009F Direct memory access controller OK 0x000000A0-0x000000A1 Programmable interrupt controller OK 0x000000A2-0x000000BF Motherboard resources OK 0x000000C0-0x000000DF Direct memory access controller OK 0x000000E0-0x000000EF Motherboard resources OK 0x000000F0-0x000000FF Numeric data processor OK 0x00000170-0x00000177 Secondary IDE Channel OK 0x000001F0-0x000001F7 Primary IDE Channel OK 0x00000201-0x00000201 Standard Game Port OK 0x00000274-0x00000277 ISAPNP Read Data Port OK 0x00000279-0x00000279 ISAPNP Read Data Port OK 0x00000290-0x00000297 Motherboard resources OK 0x000002F8-0x000002FF Communications Port (COM2) OK 0x00000330-0x00000331 MPU-401 Compatible MIDI Device OK 0x00000376-0x00000376 Secondary IDE Channel OK 0x00000378-0x0000037F ECP Printer Port (LPT1) OK 0x000003B0-0x000003BB Intel(r) 82810E Graphics Controller OK 0x000003C0-0x000003DF Intel(r) 82810E Graphics Controller OK 0x000003F0-0x000003F1 Motherboard resources OK 0x000003F2-0x000003F5 Standard floppy disk controller OK 0x000003F6-0x000003F6 Primary IDE Channel OK 0x000003F7-0x000003F7 Standard floppy disk controller OK 0x000003F8-0x000003FF Communications Port (COM1) OK 0x000004D0-0x000004D1 Motherboard resources OK 0x00000778-0x0000077B ECP Printer Port (LPT1) OK 0x00000800-0x00000805 Motherboard resources OK 0x00000A79-0x00000A79 ISAPNP Read Data Port OK 0x00000D00-0x00003FFF PCI bus OK 0x000040F8-0x00004FFF PCI bus OK 0x00005010-0x0000FFFF PCI bus OK 0x0000C000-0x0000C0FF CMI8738/C3DX PCI Audio Device OK 0x0000D000-0x0000D01F Intel(r) 82801AA USB Universal Host Controller OK 0x0000F000-0x0000F00F Intel(r) 82801AA Bus Master IDE Controller OK DMA ---------- Channel 2 Standard floppy disk controller OK Channel 3 ECP Printer Port (LPT1) OK Channel 4 Direct memory access controller OK IRQs ------- IRQ 0 System timer OK IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK IRQ 3 Communications Port (COM2) OK IRQ 4 Communications Port (COM1) OK IRQ 5 CMI8738/C3DX PCI Audio Device OK IRQ 5 Intel(r) 82801AA USB Universal Host Controller OK IRQ 6 Standard floppy disk controller OK IRQ 8 Microsoft ACPI-Compliant System OK IRQ 10 MPU-401 Compatible MIDI Device OK IRQ 12 PS/2 Compatible Mouse OK IRQ 13 Numeric data processor OK IRQ 14 Primary IDE Channel OK IRQ 15 Secondary IDE Channel OK Memory ---------- 0x0000-0x9FFFF System board OK 0xFFB00000-0xFFB7FFFF System board OK 0xFFF00000-0xFFFFFFFF System board OK 0xFFB80000-0xFFBFFFFF Intel(r) 82802 Firmware Hub Device OK 0xD0000000-0xD3FFFFFF Intel(r) 82810E Graphics Controller OK 0xD4000000-0xD407FFFF Intel(r) 82810E Graphics Controller OK 0xA0000-0xBFFFF PCI bus OK 0xA0000-0xBFFFF Intel(r) 82810E Graphics Controller OK 0xC0000-0xDFFFF PCI bus OK 0xCA000-0xCFFFF System board OK 0xE0000-0xEFFFF System board OK 0xF0000-0xF7FFF System board OK 0xF8000-0xFBFFF System board OK 0xFC000-0xFFFFF System board OK 0x100000-0x7EEFFFF System board OK 0x7EF0000-0x7EFFFFF System board OK 0x7F00000-0xFFEFFFFF PCI bus OK Components ========== Item Value +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Display --------- Name Intel(r) 82810E Graphics Controller PNP Device ID PCI\VEN_8086&DEV_7125&SUBSYS_09621019&REV_03\3&13C0B0C5&0&08 Adapter Type Intel(R) 82810, Intel Corporation compatible Adapter Description Intel(r) 82810E Graphics Controller Adapter RAM 4.00 MB (4,194,304 bytes) Installed Drivers i81xdnt5.dll Driver Version 5.13.01.2753.1-Intel Integrated Graphics 08:04PM INF File i81xnt5.inf (i81x section) Color Planes 1 Color Table Entries 16777216 Resolution 800 x 600 x 60 hertz Bits/Pixel 24 Memory Address 0xD0000000-0xD3FFFFFF Memory Address 0xD4000000-0xD407FFFF I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\i81xnt5.sys (5.13.01.2753.1-Intel Integrated Graphics 08:04PM , 135.00 KB (138,240 bytes), 4/8/2002 10:33 PM) Sound Device ----------------- Name CMI8738/C3DX PCI Audio Device Manufacturer C-Media Status OK PNP Device ID PCI\VEN_13F6&DEV_0111&SUBSYS_09621019&REV_10\4&1F4428AA&0&50F0 I/O Port 0x0000C000-0x0000C0FF IRQ Channel IRQ 5 Driver c:\windows\system32\drivers\cmaudio.sys (5.12.01.0629, 274.08 KB (280,657 bytes), 9/14/2001 7:46 PM) USB ------ Intel(r) 82801AA USB Universal Host Controller PCI\VEN_8086&DEV_2412&SUBSYS_24128086&REV_02 \3&13C0B0C5&0&FA USB Root Hub USB\ROOT_HUB\4&2C3F8097&0 --0-1565641305-1020163594=:37677-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 4:18: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 5F51137B400 for ; Tue, 30 Apr 2002 04:17:54 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 172Vdp-0007R4-00 for ; Tue, 30 Apr 2002 12:17:53 +0100 Date: Tue, 30 Apr 2002 12:17:53 +0100 From: Daniel Bye To: FBSD-Q Subject: Re: Toshiba Satellite 1670CDS + FREEBSD Woes Message-ID: <20020430111753.GB28420@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: FBSD-Q References: <20020430084749.GQ66193@ns2.wananchi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020430084749.GQ66193@ns2.wananchi.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 11:47:50AM +0300, Odhiambo Washington wrote: > hiya gang, > > I am having a problem with a Toshiba laptop here and I hope one of you can help > in advising. > > This laptop has given me enough issues and refused to run Winblows - it just hangs > or complains about himem.sys, VxD errors (whetever those are). > > So I decided to install FreeBSD from CD. This is a 4.4-RELEASE CD. Three times > it panicked while loading the kernel and rebooted immediately/spontaneously. Now I > have an error on the screen when booting from 4.4 CD: > > > Fatal trap 12: page fault while in kernel mode > fault virtual address = 0x3a > fault code = supervisor write, page not present > instruction pointer = 0x8 :0xc02a1eef > stack pointer = 0x10 :0xc06b8dec > frame pointer = 0x10 :0xc06b8e8c > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL - 0 > current process = Idle > interrupt mask = net tty bio cam > trap number = 12 > panic: page fault > Uptime: 0s > > > Could this be a device problem? Memory?? > > > Thanks in advance > Hi Wash, It does indeed look as if some of the chips on the RAM are fried. himem.sys is a terminate and stay resident driver that allows MSDOS to address memory above the base 1MB it can see natively without it. This is also called extended memory by DOSers. A vxd is a virtual device driver which runs in privileged mode (on processor ring-0). As it runs on ring-0, it has full access to all attached hardware. They are started at OS startup, or can be loaded dynamically into a running "kernel". Anyhoo, this is a FreeBSD, not an MS-DOS list, so I'll stop right about now! Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 4:25:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fep2.mta.online.no (challenger.osl.ttyl.com [148.122.208.20]) by hub.freebsd.org (Postfix) with ESMTP id 2F36E37B41A for ; Tue, 30 Apr 2002 04:25:24 -0700 (PDT) Received: from nextra.com ([148.122.204.27]) by fep2.mta.online.no (InterMail vM.4.01.03.23 201-229-121-123-20010418) with ESMTP id <20020430112522.KXYB24474.fep2.mta.online.no@nextra.com> for ; Tue, 30 Apr 2002 13:25:22 +0200 Message-ID: <3CCE7F2A.2010504@nextra.com> Date: Tue, 30 Apr 2002 13:25:30 +0200 From: Bent Ole =?ISO-8859-1?Q?Hagel=F8kken?= User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us MIME-Version: 1.0 To: questions@freebsd.org Subject: Re: cclient References: <01c701c1f028$c546e3c0$48ef1ec4@bertlaptop> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ian Barnes wrote: >i have a question ... > >i am trying to compile cclient with ssl support ... yet i cant get it right. > >/usr/ports/mail/cclient > >i need it for imp ... anyone know how to compile it with ssl support ... i >have tried --with_ssl ... --with-ssl and i still cant get it to compile... > Replied to Ian, but forgot the rest of the lot...; Remember the -D argument - like this; #make -DWITH_SSL install (No space between -D and WITH_SSL) -- Bo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 4:48:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from imo-m04.mx.aol.com (imo-m04.mx.aol.com [64.12.136.7]) by hub.freebsd.org (Postfix) with ESMTP id 244C237B419; Tue, 30 Apr 2002 04:48:35 -0700 (PDT) Received: from SavingSFlorida@aol.com by imo-m04.mx.aol.com (mail_out_v32.5.) id v.19e.1885452 (30963) for ; Tue, 30 Apr 2002 07:43:33 -0400 (EDT) From: SavingSFlorida@aol.com Message-ID: <19e.1885452.29ffdd64@aol.com> Date: Tue, 30 Apr 2002 07:43:32 EDT Subject: re: commission schedule for May 2002, Florida's ONLY guaranteed transfer service To: ilija@limousineflorida.com MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_19e.1885452.29ffdd64_boundary" X-Mailer: AOL 7.0 for Windows US sub 10503 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_19e.1885452.29ffdd64_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Wouldn't you rather call south FL ONLY guaranteed limousine service - for you 10% agent's commission payble on all 7 day advance bookings, or 10% discount to the prepaid clients. --part1_19e.1885452.29ffdd64_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit Wouldn't you rather call  south FL ONLY guaranteed limousine service - for you

10% agent's commission payble on all 7 day advance bookings, or 10% discount to the prepaid clients.


 --part1_19e.1885452.29ffdd64_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5: 4:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 4CFD037B417 for ; Tue, 30 Apr 2002 05:04:10 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 172WMV-0007SL-00 for ; Tue, 30 Apr 2002 13:04:03 +0100 Date: Tue, 30 Apr 2002 13:04:03 +0100 From: Daniel Bye To: "freebsd-questions@FreeBSD.ORG" Subject: Re: kernal logs Message-ID: <20020430120403.GC28420@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: "freebsd-questions@FreeBSD.ORG" References: <3CCD982F.85E116B3@hotwaxmedia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3CCD982F.85E116B3@hotwaxmedia.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 11:59:59AM -0700, Mike Bates wrote: > Hello, > > I have a message in my kernal log as follows: > > Apr 25 02:08:46 Production /kernel: arp: [my ip address was here] moved > from > 00:10:67:00:2b:24 to 00:02:3b:01:6c:9a on fxp0 > > I am a total newbie, and I wonder if anyone could help me understand > this by pointing me to a good reference. TYIA. Did you recently change your ethernet card? Or do you use DHCP on the fxp0 if? The message simply means the IP address is now associated with a new NIC. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5:28:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id 12CF337B404 for ; Tue, 30 Apr 2002 05:28:48 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g3UCTBi25954; Tue, 30 Apr 2002 15:29:11 +0300 Message-Id: <200204301229.g3UCTBi25954@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 30 Apr 02 15:26:51 +0200 From: "Toomas Aas" Organization: Tartu City Government To: Dmitry Mottl , freebsd-questions@freebsd.org Date: Tue, 30 Apr 2002 15:26:50 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD patch level In-reply-to: X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I dont' find any CVS tags that corresponds to release patches. > For example, what is 4.4-RELEASE-p11 and where I can get it? To get latest 4.4-RELEASE-pX you need RELENG_4_4 CVS tag. -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * Enter any 11-digit prime number to continue. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5:45:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web10005.mail.yahoo.com (web10005.mail.yahoo.com [216.136.130.41]) by hub.freebsd.org (Postfix) with SMTP id A785237B417 for ; Tue, 30 Apr 2002 05:45:12 -0700 (PDT) Message-ID: <20020430124512.51027.qmail@web10005.mail.yahoo.com> Received: from [62.84.65.154] by web10005.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 05:45:12 PDT Date: Tue, 30 Apr 2002 05:45:12 -0700 (PDT) From: Walid Nehme Subject: 4.5-install.iso To: questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i burnd 4.5-install to a cdrom as u said. but it did boot up when i restarted. the bios was configured to load cdrom ide then hdd-0. i tried to load 4.3 version on that configuration it started good, but i downloaded 4.5 from ftp, because in my country i dont have that version yet. and after burning it didnt load cdboot bootstrap while loading from cdrom. what shall i do and how to make this cd bootable? ===== Regards. Walid Nehme ICQ:5855336 MSN:nastylid@hotmail.com my homepage http://gayana.kharkov.com/Start.html __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5:45:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from SRDMAIL.SINP.MSU.RU (bigking.sinp.msu.ru [213.131.9.130]) by hub.freebsd.org (Postfix) with ESMTP id 91C9637B432 for ; Tue, 30 Apr 2002 05:45:42 -0700 (PDT) Received: from dima (helo=localhost) by SRDMAIL.SINP.MSU.RU with local-esmtp (Exim 3.34 #1) id 172X0R-00004X-00; Tue, 30 Apr 2002 16:45:19 +0400 Date: Tue, 30 Apr 2002 16:45:19 +0400 (MSD) From: Dmitry Mottl To: Toomas Aas Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD patch level In-Reply-To: <200204301229.g3UCTBi25954@lv.raad.tartu.ee> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, Toomas Aas wrote: > > I dont' find any CVS tags that corresponds to release patches. > > For example, what is 4.4-RELEASE-p11 and where I can get it? > > To get latest 4.4-RELEASE-pX you need RELENG_4_4 CVS tag. Yes, and how to get _not_ latest 4.4-RELEASE-pX ??? - Dmitry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5:55: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id B026337B417 for ; Tue, 30 Apr 2002 05:54:56 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 172X9X-000A46-00; Tue, 30 Apr 2002 13:54:43 +0100 Date: Tue, 30 Apr 2002 13:54:43 +0100 From: Ceri Davies To: Dmitry Mottl Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD patch level Message-ID: <20020430125443.GA38322@submonkey.net> Mail-Followup-To: Ceri Davies , Dmitry Mottl , freebsd-questions@freebsd.org References: <200204301229.g3UCTBi25954@lv.raad.tartu.ee> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 04:45:19PM +0400, Dmitry Mottl wrote: > On Tue, 30 Apr 2002, Toomas Aas wrote: > > > > I dont' find any CVS tags that corresponds to release patches. > > > For example, what is 4.4-RELEASE-p11 and where I can get it? > > > > To get latest 4.4-RELEASE-pX you need RELENG_4_4 CVS tag. > > Yes, and how to get _not_ latest 4.4-RELEASE-pX ??? Use RELENG_4_4 tag with the -D option to CVS. Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 5:56: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id A5AC137B400 for ; Tue, 30 Apr 2002 05:55:57 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g3UCuQx27263; Tue, 30 Apr 2002 15:56:26 +0300 Message-Id: <200204301256.g3UCuQx27263@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 30 Apr 02 15:54:10 +0200 From: "Toomas Aas" Organization: Tartu City Government To: Dmitry Mottl , freebsd-questions@freebsd.org Date: Tue, 30 Apr 2002 15:54:07 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD patch level References: <200204301229.g3UCTBi25954@lv.raad.tartu.ee> In-reply-to: X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Yes, and how to get _not_ latest 4.4-RELEASE-pX ??? For that you would need to specify the date in supfile, but I don't know the details since I have never done it. Why would you want a version *without* all the security fixes anyway? -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * Drive A: not responding...Formatting C: instead. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 6:28:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from oxe.cs.umu.se (oxe.cs.umu.se [130.239.40.14]) by hub.freebsd.org (Postfix) with ESMTP id ECDF937B419 for ; Tue, 30 Apr 2002 06:28:32 -0700 (PDT) Received: from bark.cs.umu.se (rfc1413 says tdv94ped@bark.cs.umu.se [130.239.40.185]) by oxe.cs.umu.se (8.8.8/8.8.8) with ESMTP id PAA03528; Tue, 30 Apr 2002 15:28:22 +0200 (MET DST) Date: Tue, 30 Apr 2002 15:28:22 +0200 (MEST) From: Paul Everlund To: Walid Nehme Cc: Subject: Re: 4.5-install.iso In-Reply-To: <20020430124512.51027.qmail@web10005.mail.yahoo.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, Walid Nehme wrote: > i burnd 4.5-install to a cdrom as u said. but it did boot up when i restarted. > the bios was configured to load cdrom ide then hdd-0. i tried to load 4.3 > version on that configuration it started good, but i downloaded 4.5 from ftp, > because in my country i dont have that version yet. and after burning it didnt > load cdboot bootstrap while loading from cdrom. > what shall i do and how to make this cd bootable? Did you burn the CD as an ISO, or you did burn the ISO-file as a datafile? If you open up the CD, for an example in Windows Explorer, do you see a lot of files, or just one? > ===== > Regards. > Walid Nehme Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 6:30:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 1E0E437B416 for ; Tue, 30 Apr 2002 06:30:51 -0700 (PDT) Received: from freebsd.localhost.local (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g3UDaHC07235; Tue, 30 Apr 2002 06:36:30 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Tue, 30 Apr 2002 06:36:17 -0700 From: Nathan KInkade To: Per olof Ljungmark Cc: freebsd-questions@FreeBSD.org Subject: Re: pdf's in ftp.freebsd.org/pub/FreeBSD/doc/handbook/ Message-Id: <20020430063617.395d301a.nkinkade@dsl-only.com> In-Reply-To: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> References: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002 09:23:53 +0200 Per olof Ljungmark wrote: > I'm unable to open any of the handbook pdf's. Am I missing something here? > I have Acrobat version 4. > > Thanks, are you getting an error of some sort when you try to open a pdf? what do you get if you type the command: $ which acroread4 are you trying to launch the pdf's from a browswer? if so then it may be a config issue in the browser. if you are using netscape, for example, goto Edit->Preferences->Navigator->Appllications and look for "Portable Document Format" make sure the entry reads something like "/usr/local/bin/acroread4 "%s". To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:12:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from oxe.cs.umu.se (oxe.cs.umu.se [130.239.40.14]) by hub.freebsd.org (Postfix) with ESMTP id D850337B417 for ; Tue, 30 Apr 2002 07:12:45 -0700 (PDT) Received: from gren.cs.umu.se (rfc1413 says tdv94ped@gren.cs.umu.se [130.239.40.187]) by oxe.cs.umu.se (8.8.8/8.8.8) with ESMTP id QAA14326 for ; Tue, 30 Apr 2002 16:12:44 +0200 (MET DST) Date: Tue, 30 Apr 2002 16:12:44 +0200 (MEST) From: Paul Everlund To: Subject: Patchlevel info Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! Do anyone know how to know when a new patch level is released? Is it on the FreeBSD web-server somewhere? It would be nice if the page announced a new patch level. Maybe it already does, but I haven't found it. Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:25:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from frontend1.aha.ru (fish.zenon.net [213.189.198.214]) by hub.freebsd.org (Postfix) with ESMTP id E391D37B405; Tue, 30 Apr 2002 07:25:15 -0700 (PDT) Received: from [195.151.197.36] (HELO 127.0.0.1) by frontend1.aha.ru (CommuniGate Pro SMTP 3.5.9) with ESMTP-TLS id 129787918; Tue, 30 Apr 2002 18:25:14 +0400 Date: Tue, 30 Apr 2002 18:25:12 +0400 From: Anton Shcherbinin X-Mailer: The Bat! (v1.53d) X-Priority: 3 (Normal) Message-ID: <1029992656.20020430182512@fastmail.fm> To: Greg 'groggy' Lehey Cc: freebsd-questions@freebsd.org Subject: IPv6: how can I get rid of it? In-Reply-To: <20020430112831.B8571@wantadilla.lemis.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429122206.A55341@xor.obsecurity.org> <20020430112831.B8571@wantadilla.lemis.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tuesday, April 30, 2002, 5:58:31, Greg 'groggy' Lehey wrote: > On Monday, 29 April 2002 at 12:22:07 -0700, Kris Kennaway wrote: >> On Sun, Apr 28, 2002 at 11:17:38PM +0400, Anton Shcherbinin wrote: >> >>> As I have already said, the same happens with any application and any >>> host. E. g., with ftp and ftp.freebsd.org : >>> 1) my host queries our DNS server for AAAA record of ftp.freebsd.org >>> 2) query times out in 5 secs >>> 3) the same query >>> 4) query times out in 10 secs >>> 5) the same query >>> 6) query times out in 20 secs >>> 7) the same query >>> 8) query times out in 40 secs >> >> Your DNS server is broken. It should be returning an error if it >> doesn't understand the AAAA request, or an appropriate IPv6 address >> if it exists, or an "address not found" packet. > Hmm, indeed, that sounds like the solution. Well Greg, that probably 'sounds like' 'kind of' *a* solution. But in my humble opinion that is not *the* solution. Actually, not a solution at all. The problem is the very fact that my FBSD box *tries* to look up AAAA records before A records. My DNS server is really a bit dumb (stupid?), but that is *another* problem. > Anton, have you tried a different name server? I have just tried my ISP's name server. Well, it reduces the delays, but it does not *cure* the disease. E. g., now sendmail starts up during ~45 seconds (compared to 150 seconds before). Faster, though still veeeery slow. Thank you, Greg, thank you, Nathan KInkade for your help. I will have holidays till May 13, but then I hope I'll be able to recompile sendmail, ftp, ftpd, telnet et al (maybe even kernel?) to make them use good old IP v.4. Again, thanks everybody who participated in this thread! -- Anton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:28:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ip.eth.net (punsmtp.ip.eth.net [202.9.128.19]) by hub.freebsd.org (Postfix) with ESMTP id A76A337B405 for ; Tue, 30 Apr 2002 07:28:20 -0700 (PDT) Received: (apparently) from localhost.localdomain ([202.9.130.33]) by ip.eth.net with Microsoft SMTPSVC(5.5.1877.467.46); Tue, 30 Apr 2002 19:58:04 +0530 Received: from phreaker.net (localhost [127.0.0.1]) by localhost.localdomain (8.11.6/8.11.6) with ESMTP id f3U61mn00390; Mon, 30 Apr 2001 11:31:48 +0530 (IST) (envelope-from shantanu@phreaker.net) Message-ID: <3AECFFCC.B1E9CA92@phreaker.net> Date: Mon, 30 Apr 2001 11:31:48 +0530 From: Shantanu Reply-To: shantanoo@ieee.org X-Mailer: Mozilla 4.79 [en] (X11; U; Linux 2.4.2 i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Cc: fabio.f@gmx.de Subject: Re: Frustation with FreeBSD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! I am not a expert in FreeBSD, but I will try to answer as far as I know. To start heretic without sound, you can direct /dev/dsp to /dev/null. You won't hear sound for the time being, but you can play the game. My Yamaha OPL3SA ISA card works perfectly. Don't have any problems while configuring it. To play the audio cd you need to install a software to play it. e.g. cdplay. You can mount the CD in GNOME, for that you should have the permission to run mount. to check whether you can, try from console mount /cdrom. Primarily only root can mount. TO allow others to mount, you should give the SUID to mount. Try installing XFree86 from 1st CD. Maybe your 4th CD has some problems. To install through ports, you should have the source(installaiton file) in /usr/ports/distfiles. If they are not there, it tries to download it from internet for you. You can find the applications in following paths. /usr/sbin,/sbin,/bin,/usr/bin,/usr/games,/usr/local/bin,/usr/X11R6/bin. If you want to search all the binary files, then try appfinder in kde. Regards, ... .... .- -. - .- -. ..- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:32:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from euler.cesup.ufrgs.br (euler.cesup.ufrgs.br [143.54.22.13]) by hub.freebsd.org (Postfix) with ESMTP id 9988437B416 for ; Tue, 30 Apr 2002 07:32:44 -0700 (PDT) Received: from euler.cesup.ufrgs.br (localhost.cesup.ufrgs.br [127.0.0.1]) by euler.cesup.ufrgs.br (8.12.2/8.12.2) with ESMTP id g3UEXpWS007581 for ; Tue, 30 Apr 2002 11:33:52 -0300 (BRT) Received: (from islu@localhost) by euler.cesup.ufrgs.br (8.12.2/8.12.2/Submit) id g3UEXpWl007579 for freebsd-questions@freebsd.org; Tue, 30 Apr 2002 11:33:51 -0300 (BRT) From: "Luis Fernando N. Fernandez" Message-Id: <200204301433.g3UEXpWl007579@euler.cesup.ufrgs.br> Subject: DES encription system. To: freebsd-questions@freebsd.org Date: Tue, 30 Apr 2002 11:33:50 -0300 (BRT) X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Tomorrow I installed freebsd 4.5. The host must be integraded in a network that uses nis. However, the password encription system is DES. How can I activate this encription in freebsd? Regards, Luis Fernando. -- Luis Fernando N. Fernandez, M.Sc Centro Nacional de Supercomputacao - UFRGS E-MAIL: islu@cesup.ufrgs.br Av. Osvaldo Aranha, 99 TELEFONE: 55-51-3316-3533 90035-190, Porto Alegre, RS, Brasil FAX: 55-51-3316-3350 -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:46: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id 9D1E437B41C for ; Tue, 30 Apr 2002 07:46:04 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 172Ysz-000Aob-00; Tue, 30 Apr 2002 15:45:45 +0100 Date: Tue, 30 Apr 2002 15:45:45 +0100 From: Ceri Davies To: "Luis Fernando N. Fernandez" Cc: freebsd-questions@freebsd.org Subject: Re: DES encription system. Message-ID: <20020430144545.GB41263@submonkey.net> Mail-Followup-To: Ceri Davies , "Luis Fernando N. Fernandez" , freebsd-questions@freebsd.org References: <200204301433.g3UEXpWl007579@euler.cesup.ufrgs.br> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200204301433.g3UEXpWl007579@euler.cesup.ufrgs.br> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 11:33:50AM -0300, Luis Fernando N. Fernandez wrote: > Hi, > Tomorrow I installed freebsd 4.5. > The host must be integraded in a network that uses nis. > However, the password encription system is DES. > How can I activate this encription in freebsd? You should get DES by default, IIRC. However, to make sure, once the system is installed, look in /etc/login.conf for the lines : default:\ :passwd_format=des:\ and make sure that passwd_format is set to des. If you make any changes, run : cap_mkdb /etc/login.conf for them to take effect. Also have a look in /etc/auth.conf for the line : crypt_default = des blf md5 and ensure that des is at the front. Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:52:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from frontend1.aha.ru (fish.zenon.net [213.189.198.214]) by hub.freebsd.org (Postfix) with ESMTP id 1C1BC37B41A for ; Tue, 30 Apr 2002 07:52:08 -0700 (PDT) Received: from [195.151.197.36] (HELO 127.0.0.1) by frontend1.aha.ru (CommuniGate Pro SMTP 3.5.9) with ESMTP-TLS id 129790284; Tue, 30 Apr 2002 18:52:07 +0400 Date: Tue, 30 Apr 2002 18:52:04 +0400 From: Anton Shcherbinin X-Mailer: The Bat! (v1.53d) X-Priority: 3 (Normal) Message-ID: <17231605203.20020430185204@fastmail.fm> To: Nathan KInkade Cc: freebsd-questions@freebsd.org Subject: IPv6: how can I get rid of it In-Reply-To: <20020429133417.1964fb3b.nkinkade@dsl-only.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429133417.1964fb3b.nkinkade@dsl-only.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tuesday, April 30, 2002, 0:34:17, Nathan KInkade wrote: >> host. E. g., with ftp and ftp.freebsd.org : >> 1) my host queries our DNS server for AAAA record of ftp.freebsd.org >> 2) query times out in 5 secs >> 3) the same query >> 4) query times out in 10 secs >> 5) the same query >> 6) query times out in 20 secs >> 7) the same query >> 8) query times out in 40 secs >> 9) the same query, *but* for A record; DNS server replies in some ms, >> and then everything goes great, my host quickly connects >> to ftp.freebsd.org:21 etc. >> How can I fix that? >> The only thing I could think of is to disable IPv6 at all. But wait a >> second: >> >> $ grep -i ipv6_enable /etc/rc* /etc/defaults/* >> /etc/rc:case ${ipv6_enable} in >> /etc/defaults/rc.conf:ipv6_enable="NO" # Set to YES to set up for IPv6. >> ^^^^^^^^^^^^^^^^ >> Does not it mean that IPv6 is already disabled? > since it hasn't been put out yet, might it work to remove IPV6 from > the kernel altogether by commenting out the follwing line in your > kernel config file and then recompiling the kernel? I'm running > 4.5-stable from releng_4_5 and I've had that line commented out for a > month or two now and haven't seemed to have any problems. then again, > i never really had any problems when it was there in the first place > so this point may be irrelevant? > options INET6 #IPv6 communications protocols Thanks for the idea of recompiling, Nathan. I wish I had no problems too. :( Though you advised to recompile the kernel, I thought of recompiling sendmail, ftp(d), telnet(d) and some other programs which are compiled with something like '-DINET6' option. But I am really a newbie and I do not know whether I break anything just removing '-DINET6' from several /usr/src/.../Makefile's and running 'make world' then. I would like to have the same system as you have (4.5-STABLE, that is). Yesterday I run # cvsup -h cvsup2.freebsd.org stable-supfile where stable-supfile contained the following: ================================================== *default host=cvsup1.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=RELENG_4 *default delete use-rel-suffix *default compress src-all ================================================== Did I do the right thing? You wrote about '4.5-stable from releng_4_5' and I am confused now: should I use *default release=cvs tag=RELENG_4_5 instead of *default release=cvs tag=RELENG_4 ? I will have holidays till May 13, but then I hope I'll be able to *properly* cvsup my sources and recompile them (probably commenting out '-DINET6' strings in several Makefile's). -- Anton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 7:56:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from foo31-146.visit.se (foo31-146.visit.se [62.119.31.146]) by hub.freebsd.org (Postfix) with ESMTP id 03B7137B405 for ; Tue, 30 Apr 2002 07:56:09 -0700 (PDT) Received: (from martin@localhost) by foo31-146.visit.se (8.11.6/8.11.6) id g3UEu4O15387; Tue, 30 Apr 2002 16:56:05 +0200 (CEST) (envelope-from martin) Date: Tue, 30 Apr 2002 16:56:04 +0200 From: Martin Karlsson To: Per olof Ljungmark Cc: freebsd-questions@FreeBSD.ORG Subject: Re: pdf's in ftp.freebsd.org/pub/FreeBSD/doc/handbook/ Message-ID: <20020430145604.GA918@foo31-146.visit.se> Mail-Followup-To: Martin Karlsson , Per olof Ljungmark , freebsd-questions@FreeBSD.ORG References: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="0OAP2g/MAC+5xKAE" Content-Disposition: inline In-Reply-To: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> User-Agent: Mutt/1.3.28i X-PGP-Keyid: 0x9C924660 X-PGP-Fingerprint: 5970 BE22 2C33 4D8F 53FD 7E34 66FF 9332 9C92 4660 X-Editor: Vim http://www.vim.org/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0OAP2g/MAC+5xKAE Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * Per olof Ljungmark [2002-04-30 09.23 +0200]: > I'm unable to open any of the handbook pdf's. Am I missing something here= ?=20 > I have Acrobat version 4. =20 The pdf's have been broken for a while, but i *think* the problem's fixed now. Try fetching the file(s) again. HTH --=20 Martin Karlsson -- 0x9C924660 --0OAP2g/MAC+5xKAE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8zrCDZv+TMpySRmARAiyNAKDGZP3REVwtDaCy4nsk8ymUHLKa+ACdFDGJ h/zrezJGftn4Vf7AkQdjybU= =CeDw -----END PGP SIGNATURE----- --0OAP2g/MAC+5xKAE-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8: 0:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 9F9BB37B404 for ; Tue, 30 Apr 2002 08:00:32 -0700 (PDT) Received: from barbish ([63.70.155.41]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Tue, 30 Apr 2002 11:00:30 -0400 From: "Joe & Fhe Barbish" To: "Toomas Aas" Cc: "FBSDQ" Subject: RE:burning an FBSD iso image using MS/Windows Date: Tue, 30 Apr 2002 11:00:29 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <200204290601.g3T61ha08467@lv.raad.tartu.ee> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Could you please expand on this subject. What is the manufacture of your cd r/w device? What software do you use to write an iso image file so it gets expanded into multiple files on the cd? Do you know of any free software that will write iso image to cd using MS/Windows? I have an HP 9500 and the software that came with it does not write iso image files. I even emailed the HP tech support and they said they know of no MS/Windows cd writer that writes iso image files as expanded files. -----Original Message----- From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] Sent: Monday, April 29, 2002 2:00 AM To: Joe & Fhe Barbish; freebsd-questions@freebsd.org Subject: RE: Hello Hello! > The FBSD 4 CD set is available from many FBSD FTP sites. Many people think > they can just download the ISO image, burn it to CD and away they go. Well > here a news flash for you, it's not that easy. First of all the ISO image is > not supported in the MS/Windows world. Sure you can download it and burn it > to an CD using MS/Windows, but you end up with a data disk, not an bootable > CD, which it has to be to install from. What??? I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) using MS Windows and they have always turned out right (i.e. bootable). -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * How much net work could a network work, if a network could net work? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8: 5:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dns2.s.bonet.se (dns2.s.bonet.se [212.181.54.3]) by hub.freebsd.org (Postfix) with ESMTP id 6915A37B423 for ; Tue, 30 Apr 2002 08:04:49 -0700 (PDT) Received: from there (as9-2-1.bi.s.bonet.se [217.215.7.177]) by dns2.s.bonet.se (8.11.2/8.9.3) with SMTP id g3UEv5T78397; Tue, 30 Apr 2002 16:57:06 +0200 (CEST) (envelope-from peo@intersonic.se) Message-Id: <200204301457.g3UEv5T78397@dns2.s.bonet.se> Content-Type: text/plain; charset="iso-8859-1" From: Per olof Ljungmark Organization: Intersonic AB To: Nathan KInkade Subject: Re: pdf's in ftp.freebsd.org/pub/FreeBSD/doc/handbook/ Date: Tue, 30 Apr 2002 17:04:44 +0200 X-Mailer: KMail [version 1.3.2] Cc: freebsd-questions@FreeBSD.org References: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> <20020430063617.395d301a.nkinkade@dsl-only.com> In-Reply-To: <20020430063617.395d301a.nkinkade@dsl-only.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 15.36, Nathan KInkade wrote: > On Tue, 30 Apr 2002 09:23:53 +0200 > > Per olof Ljungmark wrote: > > I'm unable to open any of the handbook pdf's. Am I missing something > > here? I have Acrobat version 4. > > > > Thanks, > > are you getting an error of some sort when you try to open a pdf? > what do you get if you type the command: > $ which acroread4 > are you trying to launch the pdf's from a browswer? if so then it may be a > config issue in the browser. if you are using netscape, for example, goto > Edit->Preferences->Navigator->Appllications and look for "Portable Document > Format" make sure the entry reads something like "/usr/local/bin/acroread4 > "%s". > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message When trying to open from AR3(Linux)-FBSD I get: "There was an error processing a page. There was a problem reading this document (109)." Under AR4-WinNT4 same but no error text. Solved the problem by distilling the *ps file but still can't open the pdf's at freebsd.org. Per olof To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8:19: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from frontend2.aha.ru (bird.zenon.net [213.189.198.215]) by hub.freebsd.org (Postfix) with ESMTP id 825D237B419 for ; Tue, 30 Apr 2002 08:18:46 -0700 (PDT) Received: from [195.151.197.36] (HELO 127.0.0.1) by frontend2.aha.ru (CommuniGate Pro SMTP 3.5.9) with ESMTP-TLS id 117739212; Tue, 30 Apr 2002 19:18:45 +0400 Date: Tue, 30 Apr 2002 19:18:43 +0400 From: Anton Shcherbinin X-Mailer: The Bat! (v1.53d) X-Priority: 3 (Normal) Message-ID: <1733203656.20020430191843@fastmail.fm> To: Roman Neuhauser Cc: freebsd-questions@freebsd.org Subject: cvsup'ping to 4.5-STABLE In-Reply-To: <20020430152011.GQ325@roman.mobil.cz> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429133417.1964fb3b.nkinkade@dsl-only.com> <17231605203.20020430185204@fastmail.fm> <20020430152011.GQ325@roman.mobil.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tuesday, April 30, 2002, 19:20:11, Roman Neuhauser wrote: >> Yesterday I run >> >> # cvsup -h cvsup2.freebsd.org stable-supfile >> >> where stable-supfile contained the following: >> >> ================================================== >> *default host=cvsup1.FreeBSD.org >> *default base=/usr >> *default prefix=/usr >> *default release=cvs tag=RELENG_4 >> *default delete use-rel-suffix >> >> *default compress >> >> src-all >> ================================================== >> Did I do the right thing? > yes. >> You wrote about '4.5-stable from releng_4_5' >> and I am confused now: should I use >> *default release=cvs tag=RELENG_4_5 >> instead of >> *default release=cvs tag=RELENG_4 >> ? > No. That would give you 4.5pX where X is current patch level. > IOW, if you want STABLE, go with RELENG_4 Thank you very much, Roman, for such a quick reply! Now, having been ensured by you that I've got the right sources (4.5-STABLE), I am running 'make world'. As for cvsup, it made a great impression on me, as it took me just 2 minutes 50 seconds to get 35 MBs of changes because of incredible compression (my connection is not very fast at all). -- Anton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8:25:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from adrastea.arcticbears.com (arcticbears.com [64.180.110.248]) by hub.freebsd.org (Postfix) with SMTP id D13AC37B43C for ; Tue, 30 Apr 2002 08:25:16 -0700 (PDT) Received: (qmail 13167 invoked by uid 502); 30 Apr 2002 15:25:16 -0000 Message-ID: <20020430152516.13166.qmail@adrastea.arcticbears.com> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429133417.1964fb3b.nkinkade@dsl-only.com> <17231605203.20020430185204@fastmail.fm> <20020430152011.GQ325@roman.mobil.cz> <1733203656.20020430191843@fastmail.fm> In-Reply-To: <1733203656.20020430191843@fastmail.fm> From: "Joe Sotham" To: "FreeBSD Mailing List" Subject: Re: cvsup'ping to 4.5-STABLE (slightl OT) Date: Tue, 30 Apr 2002 08:25:16 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Anton Shcherbinin writes: > Tuesday, April 30, 2002, 19:20:11, Roman Neuhauser wrote: > >>> Yesterday I run >>> >>> # cvsup -h cvsup2.freebsd.org stable-supfile >>> >>> where stable-supfile contained the following: >>> >>> ================================================== >>> *default host=cvsup1.FreeBSD.org >>> *default base=/usr >>> *default prefix=/usr >>> *default release=cvs tag=RELENG_4 >>> *default delete use-rel-suffix >>> >>> *default compress >>> >>> src-all >>> ================================================== >>> Did I do the right thing? > >> yes. > >>> You wrote about '4.5-stable from releng_4_5' >>> and I am confused now: should I use >>> *default release=cvs tag=RELENG_4_5 >>> instead of >>> *default release=cvs tag=RELENG_4 >>> ? > >> No. That would give you 4.5pX where X is current patch level. >> IOW, if you want STABLE, go with RELENG_4 > > Thank you very much, Roman, for such a quick reply! Now, having been > ensured by you that I've got the right sources (4.5-STABLE), I am > running 'make world'. As for cvsup, it made a great impression on me, as > it took me just 2 minutes 50 seconds to get 35 MBs of changes because of > incredible compression (my connection is not very fast at all). > > -- > Anton > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Why would one want 4.5-STABLE rather than 4.5-Px? Joe Sotham ----------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8:30:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nelly.internal.irrelevant.org (irrelevant.demon.co.uk [158.152.220.121]) by hub.freebsd.org (Postfix) with ESMTP id 01D5C37B419 for ; Tue, 30 Apr 2002 08:30:00 -0700 (PDT) Received: from simond by nelly.internal.irrelevant.org with local (Exim 3.35 #1) id 172ZZb-00042O-00; Tue, 30 Apr 2002 16:29:47 +0100 Date: Tue, 30 Apr 2002 16:29:47 +0100 From: Simon Dick To: Joe & Fhe Barbish Cc: Toomas Aas , FBSDQ Subject: Re: burning an FBSD iso image using MS/Windows Message-ID: <20020430152947.GA14709@irrelevant.org> References: <200204290601.g3T61ha08467@lv.raad.tartu.ee> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Easy CD Creator and CDRWIN can both burn ISOs properly from memory, read the manuals for more info as I can't remember how off the top of my head On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: > Could you please expand on this subject. > What is the manufacture of your cd r/w device? > What software do you use to write an iso image file so it gets > expanded into multiple files on the cd? > Do you know of any free software that will write iso image > to cd using MS/Windows? > > I have an HP 9500 and the software that came with it does not > write iso image files. I even emailed the HP tech support and they > said they know of no MS/Windows cd writer that writes iso image files > as expanded files. > > -----Original Message----- > From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] > Sent: Monday, April 29, 2002 2:00 AM > To: Joe & Fhe Barbish; freebsd-questions@freebsd.org > Subject: RE: Hello > > Hello! > > > The FBSD 4 CD set is available from many FBSD FTP sites. Many people think > > they can just download the ISO image, burn it to CD and away they go. Well > > here a news flash for you, it's not that easy. First of all the ISO image > is > > not supported in the MS/Windows world. Sure you can download it and burn > it > > to an CD using MS/Windows, but you end up with a data disk, not an > bootable > > CD, which it has to be to install from. > > What??? > > I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > using MS Windows and they have always turned out right (i.e. > bootable). > -- > Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > * How much net work could a network work, if a network could net work? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Simon Dick simond@irrelevant.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 8:52: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from SRDMAIL.SINP.MSU.RU (bigking.sinp.msu.ru [213.131.9.130]) by hub.freebsd.org (Postfix) with ESMTP id 8CA9237B416 for ; Tue, 30 Apr 2002 08:51:55 -0700 (PDT) Received: from dima (helo=localhost) by SRDMAIL.SINP.MSU.RU with local-esmtp (Exim 3.34 #1) id 172Zug-0000al-00; Tue, 30 Apr 2002 19:51:34 +0400 Date: Tue, 30 Apr 2002 19:51:34 +0400 (MSD) From: Dmitry Mottl To: Toomas Aas Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD patch level In-Reply-To: <200204301256.g3UCuQx27263@lv.raad.tartu.ee> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, Toomas Aas wrote: > > Yes, and how to get _not_ latest 4.4-RELEASE-pX ??? > > For that you would need to specify the date in supfile, but I don't > know the details since I have never done it. > > Why would you want a version *without* all the security fixes anyway? Just to understand what is 4.4-RELEASE-p9 or 4.4-RELEASE-p8 or 4.4-RELEASE-p7... -- Dmitry A. Mottl Network Administrator Skobeltsyn's Institute of Nuclear Physics Moscow State Unversity dima@sinp.msu.ru (095) 932-88-61 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 9:23:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20502.mail.yahoo.com (web20502.mail.yahoo.com [216.136.226.137]) by hub.freebsd.org (Postfix) with SMTP id 33B3137B417 for ; Tue, 30 Apr 2002 09:23:34 -0700 (PDT) Message-ID: <20020430162333.69569.qmail@web20502.mail.yahoo.com> Received: from [136.185.151.143] by web20502.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 09:23:33 PDT Date: Tue, 30 Apr 2002 09:23:33 -0700 (PDT) From: Bryan Curl Subject: Re: Boot Manager Conversion To: RichardH , freebsd-questions In-Reply-To: <5.1.0.14.0.20020429131431.00a82218@pop.wsonline.net> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1253969822-1020183813=:68955" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0-1253969822-1020183813=:68955 Content-Type: text/plain; charset=us-ascii That's exactly what I was attempting to do. All three OS's are on seperate drives. My win98 drive has an MBR. My mandrake boots from a floppy using Lilo. My FreeBSD drive has an MBR so I currently have to swap the win98 with the BSD drive as required. I tried to simply put an entry in Lilo for the BSD drive but have not had good success defining the "boot=" variable. Perhaps there is a table entry somewhere on the floppy and the set up needs to be similar to the win98 entry, I don't know. My goal is to have Primary Master=Win98(w/MBR), Primary Slave=Mandrake, Secondary Master=Toshiba CD-RW/DVD, Secondary Slave=FreeBSD. Normally boots to Win98, thus leaving its MBR clean, but if I insert my Boot Floppy, I can select Mandrake or FreeBSD from Lilo prompt. As soon as I get all critial functions off Mandrake, and onto FreeBSD, the drive will wiped and put to use for another project. Until then I want to be able to tripple boot without having to swap IDE controller cables. RichardH wrote: Last year I was triple booting 98/BSD/Slackware, all I did was write the BSD partition to the Lilo bootloader that Slackware used. Was the easiest solution. I don't recall exactly what the entries were but it was only about 4-5 lines. If you have Lilo installed with all 3 OS's on the hard drive and it is already dual booting Win98 and Linux then you can just look at those entries and you should be able to figure out what entries BSD needs with a little playing around. Then you should be able to copy that Lilo config to a floppy and boot it. I am not sure at all if this will be the same with Mandrake as I have never used it since it is pretty much the Linux version of Windows but I know you can do it with Win98, BSD and Slack. Hope that helps. Richard Hutson At 10:47 AM 4/29/2002, Bryan Curl wrote: I have a doal boot system now, Win98/Linux mandrake 7.02. Recently experimented with FreeBSD and really like it. But I had installed the MBR onto the hard drive, which means I have to swap IDE cables to from the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux in favor of BSD but havent ported all my homebrew apps yet. So, I need to tripple boot if possible. That means I need to get the MBR off the BSD drive onto a floppy and use a boot loader that will work with Win98, Linux, and FreeBSD. How do I convert my FreeBSD so it boots from a floppy using a boot loader instead of booting from the MBS on the hard drive? Mucho Gratis Bryan --bc3910@yahoo.com Do You Yahoo!? Yahoo! Health - your guide to health and wellness Mucho Gratis Bryan --bc3910@yahoo.com --------------------------------- Do You Yahoo!? Yahoo! Health - your guide to health and wellness --0-1253969822-1020183813=:68955 Content-Type: text/html; charset=us-ascii

That's exactly what I was attempting to do. All three OS's are on seperate drives. My win98 drive has an MBR. My mandrake boots from a floppy using Lilo. My FreeBSD drive has an MBR so I currently have to swap the win98 with the BSD drive as required.

I tried to simply put an entry in Lilo for the BSD drive but have not had good success defining the "boot=<partition/kernel>" variable. Perhaps there is a table entry somewhere on the floppy and the set up needs to be similar to the win98 entry, I don't know.

My goal is to have Primary Master=Win98(w/MBR), Primary Slave=Mandrake, Secondary Master=Toshiba CD-RW/DVD, Secondary Slave=FreeBSD. Normally boots to Win98, thus leaving its MBR clean, but if I insert my Boot Floppy, I can select Mandrake or FreeBSD from Lilo prompt. As soon as I get all critial functions off Mandrake, and onto FreeBSD, the drive will wiped and put to use for another project. Until then I want to be able to tripple boot without having to swap IDE controller cables.

  RichardH <richardh@wsonline.net> wrote:

Last year I was triple booting 98/BSD/Slackware, all I did was write the BSD partition to the Lilo bootloader that Slackware used. Was the easiest solution. I don't recall exactly what the entries were but it was only about 4-5 lines. If you have Lilo installed with all 3 OS's on the hard drive and it is already dual booting Win98 and Linux then you can just look at those entries and you should be able to figure out what entries BSD needs with a little playing around. Then you should be able to copy that Lilo config to a floppy and boot it. I am not sure at all if this will be the same with Mandrake as I have never used it since it is pretty much the Linux version of Windows but I know you can do it with Win98, BSD and Slack. Hope that helps. Richard Hutson


At 10:47 AM 4/29/2002, Bryan Curl wrote:

I have a doal boot system now, Win98/Linux mandrake 7.02.

Recently experimented with FreeBSD and really like it. But I had installed the MBR onto the hard drive, which means I have to swap IDE cables to from the Win98 drive to the FreeBSD drive accordingly. I am moving out of Linux in favor of BSD but havent ported all my homebrew apps yet. So, I need to tripple boot if possible. That means I need to get the MBR off the BSD drive onto a floppy and use a boot loader that will work with Win98, Linux, and FreeBSD.

How do I convert my FreeBSD so it boots from a floppy using a boot loader instead of booting from the MBS on the hard drive?

 


Mucho Gratis
Bryan
--bc3910@yahoo.com



Do You Yahoo!?
Yahoo! Health - your guide to health and wellness


Mucho Gratis
Bryan
--bc3910@yahoo.com


Do You Yahoo!?
Yahoo! Health - your guide to health and wellness --0-1253969822-1020183813=:68955-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 9:53:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id A18CD37B405 for ; Tue, 30 Apr 2002 09:53:49 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g3UGrlr49431 for ; Tue, 30 Apr 2002 17:53:48 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200204301653.g3UGrlr49431@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: gnupg compatibility Date: Tue, 30 Apr 2002 17:53:45 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've just built and installed the gnupg-1.0.7 port on FreeBSD-4.5-RELENG and have noticed that it doesn't interoperate with gnupg-1.0.6. Any e-mails signed or signed/encrypted with gnupg-1.0.7 appear as e-mails with attachments when viewed in a mail client supporting gnupg-1.0.6. Is this expected behaviour or is there some additional configuration required? Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 9:57:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id CFBD037B41B for ; Tue, 30 Apr 2002 09:57:31 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3UGrIU32351; Tue, 30 Apr 2002 12:53:19 -0400 Message-ID: <3CCECD35.1040302@potentialtech.com> Date: Tue, 30 Apr 2002 12:58:29 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Simon Dick Cc: Joe & Fhe Barbish , Toomas Aas , FBSDQ Subject: Re: burning an FBSD iso image using MS/Windows References: <200204290601.g3T61ha08467@lv.raad.tartu.ee> <20020430152947.GA14709@irrelevant.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Simon Dick wrote: > Easy CD Creator and CDRWIN can both burn ISOs properly from memory, > read the manuals for more info as I can't remember how off the top of > my head Make sure you're not using a CD-RW blank. Some windows-based CD software won't burn ISOs properly on rewritable CDs. Whether this is a bug or feature is beyond me (I'm not that versed in how CD burning works) it's just been my experience. Burning bootable FreeBSD CDs on CD-Rs has always worked for me, whatever software I use (usually cdrecord, but occasionally different windows programs as well) > > On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: > >>Could you please expand on this subject. >>What is the manufacture of your cd r/w device? >>What software do you use to write an iso image file so it gets >>expanded into multiple files on the cd? >>Do you know of any free software that will write iso image >>to cd using MS/Windows? >> >>I have an HP 9500 and the software that came with it does not >>write iso image files. I even emailed the HP tech support and they >>said they know of no MS/Windows cd writer that writes iso image files >>as expanded files. >> >>-----Original Message----- >>From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] >>Sent: Monday, April 29, 2002 2:00 AM >>To: Joe & Fhe Barbish; freebsd-questions@freebsd.org >>Subject: RE: Hello >> >>Hello! >> >> >>>The FBSD 4 CD set is available from many FBSD FTP sites. Many people think >>>they can just download the ISO image, burn it to CD and away they go. Well >>>here a news flash for you, it's not that easy. First of all the ISO image >>> >>is >> >>>not supported in the MS/Windows world. Sure you can download it and burn >>> >>it >> >>>to an CD using MS/Windows, but you end up with a data disk, not an >>> >>bootable >> >>>CD, which it has to be to install from. >>> >>What??? >> >>I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) >>using MS Windows and they have always turned out right (i.e. >>bootable). >>-- >>Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ >>* How much net work could a network work, if a network could net work? >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> >> > -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10: 2:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id F31D737B404 for ; Tue, 30 Apr 2002 10:02:32 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id KAA10136; Tue, 30 Apr 2002 10:02:27 -0700 Message-ID: <3CCECE1E.4030502@owt.com> Date: Tue, 30 Apr 2002 10:02:22 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Joe Sotham Cc: FreeBSD Mailing List Subject: Re: cvsup'ping to 4.5-STABLE (slightl OT) References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429133417.1964fb3b.nkinkade@dsl-only.com> <17231605203.20020430185204@fastmail.fm> <20020430152011.GQ325@roman.mobil.cz> <1733203656.20020430191843@fastmail.fm> <20020430152516.13166.qmail@adrastea.arcticbears.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Joe Sotham wrote: > Anton Shcherbinin writes: > >> Tuesday, April 30, 2002, 19:20:11, Roman Neuhauser wrote: >> >>>> Yesterday I run >>>> # cvsup -h cvsup2.freebsd.org stable-supfile >>>> where stable-supfile contained the following: >>>> ================================================== >>>> *default host=cvsup1.FreeBSD.org >>>> *default base=/usr >>>> *default prefix=/usr >>>> *default release=cvs tag=RELENG_4 >>>> *default delete use-rel-suffix >>>> *default compress >>>> src-all >>>> ================================================== >>>> Did I do the right thing? >>> >> >>> yes. >> >> >>>> You wrote about '4.5-stable from releng_4_5' >>>> and I am confused now: should I use >>>> *default release=cvs tag=RELENG_4_5 >>>> instead of >>>> *default release=cvs tag=RELENG_4 >>>> ? >>> >> >>> No. That would give you 4.5pX where X is current patch level. >>> IOW, if you want STABLE, go with RELENG_4 >> >> >> Thank you very much, Roman, for such a quick reply! Now, having been >> ensured by you that I've got the right sources (4.5-STABLE), I am >> running 'make world'. As for cvsup, it made a great impression on me, as >> it took me just 2 minutes 50 seconds to get 35 MBs of changes because of >> incredible compression (my connection is not very fast at all). >> -- >> Anton >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message > > > Why would one want 4.5-STABLE rather than 4.5-Px? Well, with 4.5-Px, you only have security fixes. With 4.5-stable, you have the latest version. In a short while, it will convert to 4.6-beta, 4.6-release, and finally back to 4.6-stable. Kent > Joe Sotham > ----------------------------- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10: 6:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id CA04D37B417 for ; Tue, 30 Apr 2002 10:06:13 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id KAA10417; Tue, 30 Apr 2002 10:06:06 -0700 Message-ID: <3CCECEFA.3070507@owt.com> Date: Tue, 30 Apr 2002 10:06:02 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: Per olof Ljungmark Cc: Nathan KInkade , freebsd-questions@FreeBSD.ORG Subject: Re: pdf's in ftp.freebsd.org/pub/FreeBSD/doc/handbook/ References: <5.1.0.14.0.20020430092207.0223eb10@mail.inter-sonic.com> <20020430063617.395d301a.nkinkade@dsl-only.com> <200204301457.g3UEv5T78397@dns2.s.bonet.se> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Per olof Ljungmark wrote: > On Tuesday 30 April 2002 15.36, Nathan KInkade wrote: > >>On Tue, 30 Apr 2002 09:23:53 +0200 >> >>Per olof Ljungmark wrote: >> >>>I'm unable to open any of the handbook pdf's. Am I missing something >>>here? I have Acrobat version 4. >>> >>>Thanks, >>> >>are you getting an error of some sort when you try to open a pdf? >>what do you get if you type the command: >>$ which acroread4 >>are you trying to launch the pdf's from a browswer? if so then it may be a >>config issue in the browser. if you are using netscape, for example, goto >>Edit->Preferences->Navigator->Appllications and look for "Portable Document >>Format" make sure the entry reads something like "/usr/local/bin/acroread4 >>"%s". >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> > > When trying to open from AR3(Linux)-FBSD I get: > "There was an error processing a page. > There was a problem reading this document (109)." > > Under AR4-WinNT4 same but no error text. > > Solved the problem by distilling the *ps file but still can't open the pdf's > at freebsd.org. > From what I have read on freebsd-docs, the machine that creates then was being updated to the latest ghostscript-gnu, which will fix the *.pdf generation. The updated *.pdf's may not be there yet. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10:10:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ebert.xypoint.com (ebert.xypoint.com [216.190.251.65]) by hub.freebsd.org (Postfix) with ESMTP id 968F237B422 for ; Tue, 30 Apr 2002 10:10:31 -0700 (PDT) Received: by ebert.xypoint.com with Internet Mail Service (5.5.2655.55) id ; Tue, 30 Apr 2002 10:10:16 -0700 Message-ID: <38985D9205A0D411A10500508B10DE6602997774@ebert.xypoint.com> From: Ryan Hill To: "'freebsd-questions@freebsd.org'" Subject: ifconfig syntax in rc.conf Date: Tue, 30 Apr 2002 10:10:16 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG all, can someone take a look at this and tell me if I've got the syntax right here - this is based on the examples found in the /etc/defaults/rc.conf: ifconfig_de0_media="100BaseTX" I'm trying to turn off autosensing on these NICS (its really, really bad) and I'm trying to come up with a way to do it at boot time. If the syntax above isn't correct or possible, that's fine too, I could right a small script and drop it into rc.d instead, but I'd prefer the rc.conf route if possible (yes, I am lazy). thanks, ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10:14:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail47.fg.online.no (mail47-s.fg.online.no [148.122.161.47]) by hub.freebsd.org (Postfix) with ESMTP id DEBA937B41B for ; Tue, 30 Apr 2002 10:14:15 -0700 (PDT) Received: from online.no (kunde4032.alfanett.no [195.134.62.8]) by mail47.fg.online.no (8.9.3/8.9.3) with ESMTP id TAA17242 for ; Tue, 30 Apr 2002 19:14:12 +0200 (MET DST) Message-ID: <3CCECF2F.1024679E@online.no> Date: Tue, 30 Apr 2002 19:06:55 +0200 From: Tore Lund X-Mailer: Mozilla 4.79 [en] (Windows NT 5.0; U) X-Accept-Language: en,pdf MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Re: burning an FBSD iso image using MS/Windows References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bill Moran wrote: > > Simon Dick wrote: > > Easy CD Creator and CDRWIN can both burn ISOs properly from memory, > > read the manuals for more info as I can't remember how off the top of > > my head > > Make sure you're not using a CD-RW blank. Some windows-based CD software > won't burn ISOs properly on rewritable CDs. Whether this is a bug or > feature is beyond me (I'm not that versed in how CD burning works) it's > just been my experience. For what it's worth: WinOnCD made a bootable NetBSD CD for me on a CD-RW. -- Tore To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10:15:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.asacomputers.com (mail.asacomputers.com [209.10.224.7]) by hub.freebsd.org (Postfix) with ESMTP id 70DFA37B436 for ; Tue, 30 Apr 2002 10:15:12 -0700 (PDT) Received: from prince (crimson.asacomputers.com [209.10.224.9]) by mail.asacomputers.com (8.11.6/8.11.6) with SMTP id g3UHFGQ31678 for ; Tue, 30 Apr 2002 10:15:16 -0700 Message-ID: <00c401c1f06a$a1e19640$2600a8c0@asacomputers.com> From: "Dinesh" To: Subject: scsi error Date: Tue, 30 Apr 2002 10:15:27 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_00C1_01C1F02F.F32FA680" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_00C1_01C1F02F.F32FA680 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, there I installed freebsd 3.4, also i have an external storage box which is = connected to the freebsd box through scsi channel. the scsi adapter i = used is adaptec 2940U2W 2channel. The external storage is configured as = raid-5. my freebsd box can see the raid without any problem, but when i = tried to format the raid as a single big volumes means 130GB than it = just comeout from /stand/sysinstall programme, and give me the following = errors, (da3:ahc2:0:1:1):WRITE(06). cdb: a 0 0 0 1 0 (da3:ahc2:0:1:1):ABORTED COMMAND asc:47,0 (da3:ahc2:0:1:1):SCSI parity errors also i tried to format the raid in smaller size means 5GB, 10GB, 50GB = though it just come out from the utility and give me the same errors as = above. Any help would be appreciated....... ######################### To do is to be -- Nietzsche To be is to do -- Sartre=20 Scooby do be do -- Scooby #################### Thnx Dinesh Murani Certified Novell Engineer (CNE) Microsoft Certified System Engineer (MCSE) ASA Computers Inc., 2354, Calle del mundo,=20 Santa Clara, CA 95054 e : dinesh@asacomputers.com v : 408.654.2901 x229 f : 408.654.2910 w : www.asacomputers.com ------=_NextPart_000_00C1_01C1F02F.F32FA680 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi, there
I installed freebsd 3.4, also i have an = external=20 storage box which is connected to the freebsd box through scsi channel. = the scsi=20 adapter i used is adaptec 2940U2W 2channel. The external storage is = configured=20 as raid-5. my freebsd box can see the raid  without any problem, = but when i=20 tried to format the raid as a single big volumes means 130GB than it = just=20 comeout from /stand/sysinstall programme, and give me the following=20 errors,
 
(da3:ahc2:0:1:1):WRITE(06). cdb: a 0 0 = 0 1=20 0
(da3:ahc2:0:1:1):ABORTED COMMAND=20 asc:47,0
(da3:ahc2:0:1:1):SCSI parity = errors
 
also i tried to format the raid in = smaller size=20 means 5GB, 10GB, 50GB though it just come out from the utility and give = me the=20 same errors as above.
Any help would be = appreciated.......
 
#########################
To do is = to be =20 -- Nietzsche
To be is to do  -- Sartre
Scooby do be do --=20 Scooby
####################
Thnx
Dinesh Murani
Certified = Novell=20 Engineer (CNE)
Microsoft Certified System Engineer = (MCSE)
 
ASA Computers Inc.,
2354, Calle del = mundo,=20
Santa Clara, CA 95054
 
e     : dinesh@asacomputers.com
v&= nbsp;   =20 : 408.654.2901 x229
f      :=20 408.654.2910
w    : www.asacomputers.com=20
------=_NextPart_000_00C1_01C1F02F.F32FA680-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10:32:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c001.snv.cp.net (c001-h007.c001.snv.cp.net [209.228.32.121]) by hub.freebsd.org (Postfix) with SMTP id 2981737B419 for ; Tue, 30 Apr 2002 10:32:22 -0700 (PDT) Received: (cpmta 9209 invoked from network); 30 Apr 2002 10:32:21 -0700 Received: from 209.228.32.128 (HELO mail.atkinshome.com.criticalpath.net) by smtp.register-admin.com (209.228.32.121) with SMTP; 30 Apr 2002 10:32:21 -0700 X-Sent: 30 Apr 2002 17:32:21 GMT Received: from [64.75.4.241] by mail.atkinshome.com with HTTP; Tue, 30 Apr 2002 10:32:19 -0700 (PDT) Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG From: dave@atkinshome.com Subject: cpu utilization on multi-processor machine X-Sent-From: dave@atkinshome.com Date: Tue, 30 Apr 2002 10:32:19 -0700 (PDT) X-Mailer: Web Mail 5.0.8-8 Message-Id: <20020430103221.24642.h014.c001.wm@mail.atkinshome.com.criticalpath.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What is the most accurate command to obtain the current cpu utilization and memory usage on a dual processor system? Basically, I am looking for something analogous to the task/manager / performance monitor in Windows (but not graphical--I don't install any of that stuff on the BSD boxes). I have used various commands such as systat, top, and vmstat but 1) they do not break down CPU utilization into the two processors 2) they do not appear to report a comparable (to Windows) %utilization number 3) I don't understand how to interpret all the memory metrics into a simple data point - percent of physical memory used. If anyone can post example syntax with results and how to interpret them, this would be great. I'm not a total Windows tool or anything...but in my mixed environment, I need some comparable metrics to demonstrate what I hope is true...that freeBSD is outperfoming Windows. Dave Atkins To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 10:35:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web14902.mail.yahoo.com (web14902.mail.yahoo.com [216.136.225.54]) by hub.freebsd.org (Postfix) with SMTP id 63DC137B417 for ; Tue, 30 Apr 2002 10:34:49 -0700 (PDT) Message-ID: <20020430173449.39214.qmail@web14902.mail.yahoo.com> Received: from [217.131.173.95] by web14902.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 10:34:49 PDT Date: Tue, 30 Apr 2002 10:34:49 -0700 (PDT) From: ozdemir dogan Subject: "Failed to initialize the NVdriver kernel module" To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have a problem with my Nvidia driver.I am using Freebsd 4.5 AMD Athlon 1400 Nvidia Geforce 2MX 400.And I am new inFreeBSD/Unix. I installed Matthew N. Dodd's freebsd_nvidia-1.0-2315_1_3.atr.gz driver from ftp://ftp.jurai.net/users/winter/nvidia/ I do everything in the README file and saw the something like...............0xe80000000-0xefffffff...................When I started Startx an error:"Faile to initialize the NVdriver kernel module" occured.What must I do? Thank you. XFree86.0.log and the output of startx -- --verbose 5 --logverbose 5 is ******************************************************* XFree86.0.log : XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: FreeBSD 4.4-STABLE i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Wed May 1 19:56:47 2002 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (II) xf86ReadBIOS(f8000, e80, Buf, 2)-> 8b 1e 44 fb... (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:06:0: chip 127a,2015 card 127a,2015 rev 01 class 07,80,00 hdr 00 (II) PCI: 00:08:0: chip 109e,036e card 1002,0003 rev 02 class 04,00,00 hdr 80 (II) PCI: 00:08:1: chip 109e,0878 card 1002,0003 rev 02 class 04,80,00 hdr 80 (II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1462,3800 rev 10 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0110 card 1462,8826 rev b2 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] [1] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B] [2] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B] [3] -1 0x0000ac00 - 0x0000acff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0xdde00000 - 0xdfefffff (0x2100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xcdc00000 - 0xddcfffff (0x10100000) MX[B] (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI: (0:8:0) BrookTree unknown chipset (0x036e) rev 2, Mem @ 0xdddfc000/12 (--) PCI:*(1:0:0) NVidia GeForce2 MX rev 178, Mem @ 0xde000000/24, 0xd0000000/27, BIOS @ 0xdfef0000/16 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E [1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E [2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E [3] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) [4] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [6] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) [7] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [8] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [9] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [10] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E [11] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E (II) Active PCI resource ranges after removing overlaps: [0] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E [1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E [2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E [3] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) [4] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [6] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) [7] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [8] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [9] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [10] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E [11] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [15] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [17] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E [18] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "pex5" (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension X3D-PEX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "xie" (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XIE (II) LoadModule: "nvidia" (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.2315 Module class: XFree86 Video Driver (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) NVIDIA XFree86 Driver 1.0.2315 (aritger@brahms-157.nvidia.com) Development Build Mon Jan 21 13:15:15 PST 2002 (II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2/TNT2 Pro, RIVA TNT2 Ultra, Vanta, RIVA TNT2 Model 64/Model 64 Pro, Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/Quadro2 Go, GeForce2 GTS/GeForce2 Pro, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, NV17, NV17, NV17, NV17, NV17M, NV17M, NV17GL, NV17GL, NV17GL, NV17M-GL, GeForce2 Integrated GPU, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC (II) Primary Device is: PCI 01:00:0 (--) Chipset GeForce2 MX/MX 400 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [15] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [17] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E [18] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [18] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [20] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E [21] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E [23] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [24] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (==) NVIDIA(0): Depth 8, (==) framebuffer bpp 8 (==) NVIDIA(0): Default visual is PseudoColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xD0000000 (--) NVIDIA(0): MMIO registers at 0xDE000000 (EE) NVIDIA(0): Failed to initialize the NVdriver kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org. the output of startx -- --verbose 5 --logverbose 5 is : xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name ":0" in "list" command xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name ":0" in "add" command xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name ":0" in "list" command xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name ":0" in "add" command Unrecognized option: --verbose use: X [:] [option] -a # mouse acceleration (pixels) -ac disable access control restrictions -audit int set audit trail level -auth file select authorization file bc enable bug compatibility +bs enable any backing store support -bs disable any backing store support -c turns off key-click c # key-click volume (0-100) -cc int default color visual class -co file color database file -core generate core dump on fatal error -dpi int screen resolution in dots per inch dpms enables VESA DPMS monitor control -dpms disables VESA DPMS monitor control -deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs -f # bell base (0-100) -fc string cursor font -fn string default font name -fp string default font path -help prints message with these options -I ignore all remaining arguments -ld int limit data space to N Kb -lf int limit number of open files to N -ls int limit stack space to N Kb -nolock disable the locking mechanism -logo enable logo in screen saver nologo disable logo in screen saver -nolisten string don't listen on protocol -p # screen-saver pattern duration (minutes) -pn accept failure to listen on all ports -nopn reject failure to listen on all ports -r turns off auto-repeat r turns on auto-repeat -s # screen-saver timeout (minutes) -sp file security policy file -su disable any save under support -t # mouse threshold (pixels) -terminate terminate at server reset -to # connection time out -tst disable testing extensions ttyxx server started from init on /dev/ttyxx v video blanking for screen-saver -v screen-saver without video blanking -wm WhenMapped default backing-store -x string loads named extension at init time +xinerama Enable XINERAMA extension -xinerama Disable XINERAMA extension -query host-name contact named host for XDMCP -broadcast broadcast for XDMCP -indirect host-name contact named host for indirect XDMCP -port port-num UDP port number to send messages to -from local-address specify the local address to connect from -once Terminate server after one session -class display-class specify display class to send in manage -cookie xdm-auth-bits specify the magic cookie for XDMCP -displayID display-id manufacturer display ID for request The X Keyboard Extension adds the following arguments: -kb disable the X Keyboard Extension +kb enable the X Keyboard Extension [+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ] enable/disable accessx key sequences -ar1 set XKB autorepeat delay -ar2 set XKB autorepeat interval -noloadxkb don't load XKB keymap description -xkbcomp default keymap compiler -xkbdb file that contains default XKB keymaps -xkbmap XKB keyboard description to load on startup Device Dependent Usage -xf86config file specify a configuration file -modulepath paths specify the module search path -logfile file specify a log file name -configure probe for devices and write an XF86Config -probeonly probe for devices, then exit -scanpci execute the scanpci module and exit -verbose [n] verbose startup messages -logverbose [n] verbose log messages -quiet minimal startup messages -pixmap24 use 24bpp pixmaps for depth 24 -pixmap32 use 32bpp pixmaps for depth 24 -fbbpp n set bpp for the framebuffer. Default: 8 -depth n set colour depth. Default: 8 -gamma f set gamma value (0.1 < f < 10.0) Default: 1.0 -rgamma f set gamma value for red phase -ggamma f set gamma value for green phase -bgamma f set gamma value for blue phase -weight nnn set RGB weighting at 16 bpp. Default: 565 -layout name specify the ServerLayout section name -screen name specify the Screen section name -keyboard name specify the core keyboard InputDevice name -pointer name specify the core pointer InputDevice name -nosilk disable Silken Mouse -flipPixels swap default black/white Pixel values -disableVidMode disable mode adjustments with xvidtune -allowNonLocalXvidtune allow xvidtune to be run as a non-local client -disableModInDev disable dynamic modification of input device settings -allowNonLocalModInDev allow changes to keyboard and mouse settings from non-local clients -allowMouseOpenFail start server even if the mouse can't be initialized -bestRefresh choose modes with the best refresh rate -ignoreABI make module ABI mismatches non-fatal -version show the server version vtXX use the specified VT number (1-12) -keeptty don't detach controlling tty (for debugging only) giving up. xinit: Connection refused (errno 61): unable to connect to X server xinit: No such process (errno 3): Server error. xauth: creating new authority file /root/.Xauthority xauth: (argv):1: bad display name ":0" in "remove" command xauth: (argv):1: bad display name ":0" in "remove" command __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11: 1:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc54.attbi.com (rwcrmhc54.attbi.com [216.148.227.87]) by hub.freebsd.org (Postfix) with ESMTP id C4A1C37B432 for ; Tue, 30 Apr 2002 11:00:56 -0700 (PDT) Received: from blossom.cjclark.org ([12.234.91.48]) by rwcrmhc54.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020430180056.ZZPC2627.rwcrmhc54.attbi.com@blossom.cjclark.org> for ; Tue, 30 Apr 2002 18:00:56 +0000 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.6) id g3UI0ue56038 for freebsd-questions@freebsd.org; Tue, 30 Apr 2002 11:00:56 -0700 (PDT) (envelope-from cjc) Date: Tue, 30 Apr 2002 11:00:56 -0700 From: "Crist J. Clark" To: freebsd-questions@freebsd.org Subject: tcpdump(8) filtered by time Message-ID: <20020430110056.B55983@blossom.cjclark.org> Reply-To: cjclark@alum.mit.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Slightly off-topic, but I'd like see if anyone has any ideas. I have a tcpdump(8) file that spans a few hours. I want to isolate an hour somewhere in the middle and dump it to a new file. I can't figure out how to do this. I know how to workaround the issue to capture packets for 'x' amount of time from the begining of the file[0], but I can't come up with a way to grab packets starting at an offset somewhere past the beginning (either by time or count). Anyone have any ideas on how to do this? I guess I'm stuck editing the binary by hand or making my own tool to mess with the pcap(3) file? [0] To grab the first 'x' seconds (minutes, whatever), you can first dump the file and print the packets. Run the printed output through grep(1), awk(1), perl(1), or filter all but the packets up to the time you want. Count the number of lines printed with wc(1) (of course, with awk(1) or perl(1) you can just do the counting in the script itself), and then use the '-c' argument of tcpdump(1), $ tcpdump -r big.pcap -c -w timed.pcap So, the abilty to specify arbitrary ranges of packets by count is essentially equivalent to being able to do time ranges, but I still can't figure out how to start at an offset by count. -- Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11: 7:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hot.sand.net (sand.net [153.105.100.100]) by hub.freebsd.org (Postfix) with ESMTP id 7E3FE37B419 for ; Tue, 30 Apr 2002 11:07:45 -0700 (PDT) Received: from localhost (adsl-64-163-30-233.dsl.sndg02.pacbell.net [64.163.30.233]) by hot.sand.net (8.10.2/8.11.4) with ESMTP id g3UI45520120; Tue, 30 Apr 2002 11:04:05 -0700 (PDT) Date: Tue, 30 Apr 2002 11:07:34 -0700 Subject: Re: [Newbie]/mnt/usr/X11R6/lib/Server/drivers/vga256/ati/* Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v481) Cc: FreeBSD Questions LIST , XFree86 FreeBSD LIST To: newbie@XFree86.Org From: John Clark In-Reply-To: <20020425223130.N1082-100000@66-75-1-142.san.rr.com> Message-Id: <25A7E85E-5C65-11D6-B404-0050E420D957@ucsd.edu> Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.481) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Am Donnerstag den, 25. April 2002, um 22:44, schrieb Peter Leftwich: > Okay, you'll be quite proud of me - I took 13 minutes and in a swirl of > mixed pleasure (relief) and pain and despair, learned that my video > adapter > (supposedly Rage 128 based; it's an ATI All-in-Wonder 16mb AGP card) is > -not- supported by the ati driver, even though the running of `XFree86 > -configure` happily picks this driver out every time and packages it > with a > pink ribbon! >:-( Yes, well, basically I would go to: http://www.xfree86.org/current/Status.html And check for devices, then do a yahoo search (or your favorite engine) for some store/e-store that had such. Alternatively you can look at: http://www.computerhope.com/help/vati.htm for a discription of what is an ATI card... Since I don't have ATI cards in general, although I believe my Mac G3 has some version of such, I don't know whether this page is really useful, but it looked like it could help you identify your card, or other cards which may have support. In my PC machines I have some old Trident cards, and the support for them has been there for a long time. In my case of getting X up on my Compaq Presario laptop, under NetBSD 1.5.2, earlier versions of Xserver crashed, or put the screen into wyrd melt mode. I now have a version 4.2.0 up, but it was not easy... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:12:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server1.safepages.com (server1.safepages.com [216.127.146.3]) by hub.freebsd.org (Postfix) with ESMTP id ECF1437B404 for ; Tue, 30 Apr 2002 11:12:17 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool24-74.nas32.philadelphia1.pa.us.da.qwest.net [65.129.24.74]) by server1.safepages.com (Postfix) with ESMTP id 19C7C5F4F for ; Tue, 30 Apr 2002 18:12:09 +0000 (GMT) Content-Type: text/plain; charset="us-ascii" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: freebsd-questions@FreeBSD.org Subject: qt23 won't build Date: Tue, 30 Apr 2002 14:12:10 -0400 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204301412.10351.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I updated my ports and now qt23 won't build! Does anybody have a fix for this? ===> Building for qt-2.3.1_2 (cd /usr/ports/x11-toolkits/qt23/work/qt-2.3.1; /usr/bin/env QTDIR=/usr/ports/x1 1-toolkits/qt23/work/qt-2.3.1 LD_LIBRARY_PATH=/usr/ports/x11-toolkits/qt23/work/ qt-2.3.1/lib PORTOBJFORMAT=elf PREFIX=/usr/X11R6 LOCALBASE=/usr/local X11BASE=/u sr/X11R6 MOTIFLIB="-L/usr/X11R6/lib -lXm -lXp" LIBDIR="/usr/lib" CFLAGS="-O -pip e " CXXFLAGS=" -O -pipe " BSD_INSTALL_PROGRAM="install -c -s -o root -g wheel -m 555" BSD_INSTALL_SCRIPT="install -c -o root -g wheel -m 555" BSD_INSTALL_DATA ="install -c -o root -g wheel -m 444" BSD_INSTALL_MAN="install -c -o root -g wh eel -m 444" gmake -f Makefile all) cd src/moc; gmake gmake[1]: Entering directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1/src/moc ' gmake[1]: Nothing to be done for `all'. gmake[1]: Leaving directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1/src/moc' rm -f bin/moc2 cp src/moc/moc2 bin/moc2 gmake -f src-mt.mk gmake[1]: Entering directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1' cd src; gmake 'QT_THREAD_SUFFIX=-mt' 'QT_LFLAGS_MT=$(SYSCONF_LFLA GS_THREAD) $(SYSCONF_LIBS_THREAD)' 'QT_CXX_MT=$(SYSCONF_CXXFLAGS_THREAD ) -DQT_THREAD_SUPPORT' 'QT_C_MT=$(SYSCONF_CFLAGS_THREAD) -DQT_THREAD_SUPPOR T' gmake[2]: Entering directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1/src' c++ -pthread -D_THREAD_SAFE -DQT_THREAD_SUPPORT -c -I/usr/X11R6/include -I/usr/p orts/x11-toolkits/qt23/work/qt-2.3.1/include -pthread -D_THREAD_SAFE -I/usr/X11R 6/include -DQT_PREFIX=\"/usr/X11R6\" -pipe -fno-exceptions -O -pipe -I/usr/inc lude -D_PTH_H_ -D_PTH_PTHREAD_H_ -O -pipe -fPIC -DQT_BUILTIN_GIF_READER=1 -DQT_ XFT -fno-exceptions -I/usr/local/include -o kernel/qpsprinter.o kernel/qpsprin ter.cpp In file included from kernel/qapplication.h:42, from kernel/qpsprinter.cpp:73: kernel/qwidget.h:129: syntax error before `(' kernel/qwidget.h:417: `WId' was not declared in this scope kernel/qwidget.h:489: `WId' was not declared in this scope kernel/qwidget.h:489: syntax error before `=' kernel/qwidget.h:490: variable or field `create' declared void kernel/qwidget.h:490: ANSI C++ forbids initialization of member `create' kernel/qwidget.h:490: making `create' static kernel/qwidget.h:490: ANSI C++ forbids in-class initialization of non-const stat ic member `create' kernel/qwidget.h:490: `create' declared as a `virtual' field kernel/qwidget.h:520: `WId' was not declared in this scope kernel/qwidget.h:520: variable or field `setWinId' declared void kernel/qwidget.h:545: syntax error before `;' kernel/qwidget.h:628: syntax error before `::' cpp0: output pipe has been closed gmake[2]: *** [kernel/qpsprinter.o] Error 1 gmake[2]: Leaving directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1/src' gmake[1]: *** [src-mt] Error 2 gmake[1]: Leaving directory `/usr/ports/x11-toolkits/qt23/work/qt-2.3.1' gmake: *** [src-mt] Error 2 *** Error code 2 Stop in /usr/ports/x11-toolkits/qt23. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:17: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 3049237B400 for ; Tue, 30 Apr 2002 11:16:57 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g3UIGtr49555 for ; Tue, 30 Apr 2002 19:16:56 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200204301816.g3UIGtr49555@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: ifconfig syntax in rc.conf Date: Tue, 30 Apr 2002 19:16:53 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 04/30/2002 at 10:10:16, Ryan Hill said: > can someone take a look at this and tell me if I've got the syntax right > here - this is based on the examples found in the /etc/defaults/rc.conf: > > ifconfig_de0_media="100BaseTX" Alternatively, you can create a file named /etc/start_if.de0 with contents: ifconfig de0 media 10baseTX Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:20:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mxzilla1.xs4all.nl (mxzilla1.xs4all.nl [194.109.6.54]) by hub.freebsd.org (Postfix) with ESMTP id 33D8437B417 for ; Tue, 30 Apr 2002 11:20:31 -0700 (PDT) Received: from xs4.xs4all.nl (xs4.xs4all.nl [194.109.6.45]) by mxzilla1.xs4all.nl (8.12.0/8.12.0) with ESMTP id g3UIKTLI002248 for ; Tue, 30 Apr 2002 20:20:30 +0200 (CEST) Received: (from rene@localhost) by xs4.xs4all.nl (8.9.0/8.9.0) id UAA02998 for questions@freebsd.org; Tue, 30 Apr 2002 20:20:29 +0200 (CEST) Date: Tue, 30 Apr 2002 20:20:29 +0200 From: rene@xs4all.nl To: questions@freebsd.org Subject: screen package - no resizing, doesn't recognize keyboard backspace Message-ID: <20020430202029.E4998@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I'm running PORTNAME= screen PORTVERSION= 3.9.11 and for some strange reason, it won't 'do' a backspace - doesn't recognize the key(sequence) i guess.. i have no clue about the internals of keyboard layout recognition, but would like to get a basic understanding of it.. thanx for any (reading) tips you may have for me.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:21:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ipsnetwork.net (mail.ipsnetwork.net [209.202.83.5]) by hub.freebsd.org (Postfix) with ESMTP id 6EAC337B416 for ; Tue, 30 Apr 2002 11:21:22 -0700 (PDT) Received: (from apache@localhost) by mail.ipsnetwork.net (8.11.1/8.11.1) id g3UILLs11371; Tue, 30 Apr 2002 14:21:21 -0400 (EDT) Date: Tue, 30 Apr 2002 14:21:21 -0400 (EDT) Message-Id: <200204301821.g3UILLs11371@mail.ipsnetwork.net> From: "Nathan Vidican" <> To: questions@freebsd.org Reply-To: nathan@vidican.com Subject: OT: FreeBSD + Clustering, anyone tried using Wulfkit w/ FreeBSD before? X-Mailer: NeoMail 1.24 X-IPAddress: 216.94.6.27 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I seem to recall a thread, and a few articles here and there about clustering with FreeBSD. Not that I'm in a position myself to do anything about/for/with it, but for curiosity's sake I had to ask. Has anyone tried working with Dolphin Interconnect's Wulfkit system under FreeBSD? I came accross the site looking for rack mountable chassis, and read on a bit about there system. Seems it might be very useful to anyone trying a clustering project using FreeBSD. -- Nathan Vidican Nathan@Vidican.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:24:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ipsnetwork.net (mail.ipsnetwork.net [209.202.83.5]) by hub.freebsd.org (Postfix) with ESMTP id 3375C37B404 for ; Tue, 30 Apr 2002 11:24:34 -0700 (PDT) Received: (from apache@localhost) by mail.ipsnetwork.net (8.11.1/8.11.1) id g3UIObt11377; Tue, 30 Apr 2002 14:24:37 -0400 (EDT) Date: Tue, 30 Apr 2002 14:24:37 -0400 (EDT) Message-Id: <200204301824.g3UIObt11377@mail.ipsnetwork.net> From: "Nathan Vidican" <> To: questions@freebsd.org Reply-To: nathan@vidican.com Subject: OT: hardware reccomendations X-Mailer: NeoMail 1.24 X-IPAddress: 216.94.6.27 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can anyone suggest a place where from I may obtain a 2,3, or 4U rack- mount chassis which has 3 (or more) ATA100 hot-swapable bays, can accomidate a standard ATX system board, and has the option of coming with redundant power supplies? The unit must also allow me to use three PCI cards with it. Cost being the primary issue, I'd like to find something $200 - $300. -- Nathan Vidican Nathan@Vidican.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:25:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx11.airmail.net (mx11.airmail.net [209.196.77.108]) by hub.freebsd.org (Postfix) with ESMTP id F344437B423 for ; Tue, 30 Apr 2002 11:24:52 -0700 (PDT) Received: from mail3.iadfw.net ([209.196.123.3]) by mx11.airmail.net with smtp (Exim 3.33 #1) id 172cJ2-000LZL-00; Tue, 30 Apr 2002 13:24:52 -0500 Received: from station1 from [209.144.227.220] by mail3.iadfw.net (/\##/\ Smail3.1.30.16 #30.61) with smtp for sender: id ; Tue, 30 Apr 2002 13:25:32 -0500 (CDT) Message-ID: <029601c1f074$65475210$0100a8c0@station1> From: "Joe Gwozdecki" To: "ozdemir dogan" , References: <20020430173449.39214.qmail@web14902.mail.yahoo.com> Subject: Re: "Failed to initialize the NVdriver kernel module" Date: Tue, 30 Apr 2002 13:25:23 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You are running the latest Nvidia card from the Ge Force 2 MX family. If the "nv driver" from x server won't support it, you need another driver, or more realistically, another video card. From what I see, FreeBSD lags behind somewhat in the availability of drivers for the latest and greatest cards on the market. Video cards are not a top priority. My Nvidia Ge Force 2 MX card (no numbers after MX, such as 200 or 400) works great with driver #320. It was specifically on the list and that is why I bought it. The cards have to match the list exactly. I am not a pro, so I have to stick with the list. ----- Original Message ----- From: "ozdemir dogan" To: Sent: Tuesday, April 30, 2002 12:34 PM Subject: "Failed to initialize the NVdriver kernel module" > > Hi I have a problem with my Nvidia driver.I > am using Freebsd 4.5 AMD Athlon 1400 Nvidia Geforce > 2MX 400.And I am new inFreeBSD/Unix. > I installed Matthew N. Dodd's > freebsd_nvidia-1.0-2315_1_3.atr.gz driver from > ftp://ftp.jurai.net/users/winter/nvidia/ > I do everything in the README file and saw the > something > like...............0xe80000000-0xefffffff...................When > I started Startx an error:"Faile to initialize the > NVdriver kernel module" > occured.What must I do? Thank you. > XFree86.0.log and the output of startx -- --verbose 5 > --logverbose 5 is > ******************************************************* > XFree86.0.log : > > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your > card is > newer than the above date, look for a newer version > before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: FreeBSD 4.4-STABLE i386 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Wed May > 1 19:56:47 2002 > (==) Using config file: "/etc/X11/XF86Config" > Markers: (--) probed, (**) from config file, (==) > default setting, > (++) from command line, (!!) notice, (II) > informational, > (WW) warning, (EE) error, (NI) not > implemented, (??) unknown. > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/ lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/ 75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (II) xf86ReadBIOS(f8000, e80, Buf, 2)-> 8b 1e 44 fb... > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.4 > XFree86 XInput driver : 0.2 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, > mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,3099 card 0000,0000 rev > 00 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev > 00 class 06,04,00 hdr 01 > (II) PCI: 00:06:0: chip 127a,2015 card 127a,2015 rev > 01 class 07,80,00 hdr 00 > (II) PCI: 00:08:0: chip 109e,036e card 1002,0003 rev > 02 class 04,00,00 hdr 80 > (II) PCI: 00:08:1: chip 109e,0878 card 1002,0003 rev > 02 class 04,80,00 hdr 80 > (II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev > 00 class 06,01,00 hdr 80 > (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev > 06 class 01,01,8a hdr 00 > (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev > 1b class 0c,03,00 hdr 00 > (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev > 1b class 0c,03,00 hdr 00 > (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev > 1b class 0c,03,00 hdr 00 > (II) PCI: 00:11:5: chip 1106,3059 card 1462,3800 rev > 10 class 04,01,00 hdr 00 > (II) PCI: 01:00:0: chip 10de,0110 card 1462,8826 rev > b2 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: > 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c > (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [1] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B] > [2] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B] > [3] -1 0x0000ac00 - 0x0000acff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xdde00000 - 0xdfefffff (0x2100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xcdc00000 - 0xddcfffff (0x10100000) MX[B] > (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: > 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI: (0:8:0) BrookTree unknown chipset (0x036e) > rev 2, Mem @ 0xdddfc000/12 > (--) PCI:*(1:0:0) NVidia GeForce2 MX rev 178, Mem @ > 0xde000000/24, 0xd0000000/27, BIOS @ 0xdfef0000/16 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E > [1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E > [2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E > [3] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) > [4] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) > [5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) > [6] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) > [7] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [8] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [9] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E > [10] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E > [11] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E > [12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > (II) Active PCI resource ranges after removing > overlaps: > [0] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E > [1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E > [2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E > [3] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) > [4] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) > [5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) > [6] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) > [7] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [8] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [9] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E > [10] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E > [11] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E > [12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > (II) OS-reported resource ranges after removing > overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E > [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E > [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E > [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) > [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) > [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) > [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [15] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E > [17] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E > [18] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E > [19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > (II) LoadModule: "dbe" > (II) Loading > /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading > /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "pex5" > (II) Loading > /usr/X11R6/lib/modules/extensions/libpex5.a > (II) Module pex5: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension X3D-PEX > (II) LoadModule: "record" > (II) Loading > /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "xie" > (II) Loading > /usr/X11R6/lib/modules/extensions/libxie.a > (II) Module xie: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension XIE > (II) LoadModule: "nvidia" > (II) Loading > /usr/X11R6/lib/modules/drivers/nvidia_drv.o > (II) Module nvidia: vendor="NVIDIA Corporation" > compiled for 4.0.2, module version = 1.0.2315 > Module class: XFree86 Video Driver > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.2 > (II) NVIDIA XFree86 Driver 1.0.2315 > (aritger@brahms-157.nvidia.com) Development Build > Mon Jan 21 13:15:15 PST 2002 > (II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA > TNT2/TNT2 Pro, > RIVA TNT2 Ultra, Vanta, RIVA TNT2 Model 64/Model 64 > Pro, > Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, > GeForce2 MX/MX 400, > GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/Quadro2 > Go, > GeForce2 GTS/GeForce2 Pro, GeForce2 Ti, GeForce2 > Ultra, Quadro2 Pro, > NV17, NV17, NV17, NV17, NV17M, NV17M, NV17GL, NV17GL, > NV17GL, > NV17M-GL, GeForce2 Integrated GPU, GeForce3, GeForce3 > Ti 200, > GeForce3 Ti 500, Quadro DCC > (II) Primary Device is: PCI 01:00:0 > (--) Chipset GeForce2 MX/MX 400 found > (II) resource ranges after xf86ClaimFixedResources() > call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E > [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E > [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E > [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) > [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) > [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) > [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [15] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [16] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E > [17] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E > [18] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E > [19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xdddfd000 - 0xdddfdfff (0x1000) MX[B]E > [6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]E > [7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E > [8] -1 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B) > [9] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) > [10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) > [11] -1 0xdddfc000 - 0xdddfcfff (0x1000) MX[B](B) > [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [17] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [18] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]E > [20] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]E > [21] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E > [22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [23] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [24] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (==) NVIDIA(0): Depth 8, (==) framebuffer bpp 8 > (==) NVIDIA(0): Default visual is PseudoColor > (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) > (--) NVIDIA(0): Linear framebuffer at 0xD0000000 > (--) NVIDIA(0): MMIO registers at 0xDE000000 > (EE) NVIDIA(0): Failed to initialize the NVdriver > kernel module! > (EE) NVIDIA(0): *** Aborting *** > (II) UnloadModule: "nvidia" > (II) UnloadModule: "vgahw" > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a > (EE) Screen(s) found, but none have a usable > configuration. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, > please send > the full server output, not just the last messages. > This can be found in the log file > "/var/log/XFree86.0.log". > Please report problems to xfree86@xfree86.org. > > the output of startx -- --verbose 5 --logverbose 5 is > : > > xauth: creating new authority file /root/.Xauthority > xauth: (argv):1: bad display name ":0" in "list" > command > xauth: creating new authority file /root/.Xauthority > xauth: (argv):1: bad display name ":0" in "add" > command > xauth: creating new authority file /root/.Xauthority > xauth: (argv):1: bad display name ":0" in "list" > command > xauth: creating new authority file /root/.Xauthority > xauth: (argv):1: bad display name ":0" in "add" > command > > Unrecognized option: --verbose > use: X [:] [option] > -a # mouse acceleration (pixels) > -ac disable access control > restrictions > -audit int set audit trail level > -auth file select authorization file > bc enable bug compatibility > +bs enable any backing store > support > -bs disable any backing store > support > -c turns off key-click > c # key-click volume (0-100) > -cc int default color visual class > -co file color database file > -core generate core dump on fatal > error > -dpi int screen resolution in dots per > inch > dpms enables VESA DPMS monitor > control > -dpms disables VESA DPMS monitor > control > -deferglyphs [none|all|16] defer loading of > [no|all|16-bit] glyphs > -f # bell base (0-100) > -fc string cursor font > -fn string default font name > -fp string default font path > -help prints message with these > options > -I ignore all remaining arguments > -ld int limit data space to N Kb > -lf int limit number of open files to N > -ls int limit stack space to N Kb > -nolock disable the locking mechanism > -logo enable logo in screen saver > nologo disable logo in screen saver > -nolisten string don't listen on protocol > -p # screen-saver pattern duration > (minutes) > -pn accept failure to listen on all > ports > -nopn reject failure to listen on all > ports > -r turns off auto-repeat > r turns on auto-repeat > -s # screen-saver timeout (minutes) > -sp file security policy file > -su disable any save under support > -t # mouse threshold (pixels) > -terminate terminate at server reset > -to # connection time out > -tst disable testing extensions > ttyxx server started from init on > /dev/ttyxx > v video blanking for screen-saver > -v screen-saver without video > blanking > -wm WhenMapped default > backing-store > -x string loads named extension at init > time > +xinerama Enable XINERAMA extension > -xinerama Disable XINERAMA extension > -query host-name contact named host for XDMCP > -broadcast broadcast for XDMCP > -indirect host-name contact named host for indirect > XDMCP > -port port-num UDP port number to send > messages to > -from local-address specify the local address to > connect from > -once Terminate server after one > session > -class display-class specify display class to send > in manage > -cookie xdm-auth-bits specify the magic cookie for > XDMCP > -displayID display-id manufacturer display ID for > request > The X Keyboard Extension adds the following arguments: > -kb disable the X Keyboard > Extension > +kb enable the X Keyboard Extension > [+-]accessx [ timeout [ timeout_mask [ feedback [ > options_mask] ] ] ] > enable/disable accessx key > sequences > -ar1 set XKB autorepeat delay > -ar2 set XKB autorepeat interval > -noloadxkb don't load XKB keymap > description > -xkbcomp default keymap compiler > -xkbdb file that contains default XKB > keymaps > -xkbmap XKB keyboard description to > load on startup > > > Device Dependent Usage > -xf86config file specify a configuration file > -modulepath paths specify the module search path > -logfile file specify a log file name > -configure probe for devices and write an > XF86Config > -probeonly probe for devices, then exit > -scanpci execute the scanpci module and > exit > -verbose [n] verbose startup messages > -logverbose [n] verbose log messages > -quiet minimal startup messages > -pixmap24 use 24bpp pixmaps for depth 24 > -pixmap32 use 32bpp pixmaps for depth 24 > -fbbpp n set bpp for the framebuffer. > Default: 8 > -depth n set colour depth. Default: 8 > -gamma f set gamma value (0.1 < f < > 10.0) Default: 1.0 > -rgamma f set gamma value for red phase > -ggamma f set gamma value for green phase > -bgamma f set gamma value for blue phase > -weight nnn set RGB weighting at 16 bpp. > Default: 565 > -layout name specify the ServerLayout > section name > -screen name specify the Screen section name > -keyboard name specify the core keyboard > InputDevice name > -pointer name specify the core pointer > InputDevice name > -nosilk disable Silken Mouse > -flipPixels swap default black/white Pixel > values > -disableVidMode disable mode adjustments with > xvidtune > -allowNonLocalXvidtune allow xvidtune to be run as a > non-local client > -disableModInDev disable dynamic modification of > input device settings > -allowNonLocalModInDev allow changes to keyboard and > mouse settings > from non-local clients > -allowMouseOpenFail start server even if the mouse > can't be initialized > -bestRefresh choose modes with the best > refresh rate > -ignoreABI make module ABI mismatches > non-fatal > -version show the server version > vtXX use the specified VT number > (1-12) > -keeptty don't detach controlling tty > (for debugging only) > > giving up. > xinit: Connection refused (errno 61): unable to > connect to X server > xinit: No such process (errno 3): Server error. > xauth: creating new authority file /root/.Xauthority > xauth: (argv):1: bad display name ":0" in "remove" > command > xauth: (argv):1: bad display name ":0" in "remove" > command > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:28:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hobbiton.shire.net (frogmorton.shire.net [204.228.145.136]) by hub.freebsd.org (Postfix) with ESMTP id 9586237B405 for ; Tue, 30 Apr 2002 11:28:46 -0700 (PDT) Received: from [68.64.98.90] (helo=localhost) by hobbiton.shire.net with asmtp (Exim 3.22 #6) id 172cN1-00063v-00; Tue, 30 Apr 2002 12:28:59 -0600 Date: Tue, 30 Apr 2002 14:28:38 -0400 Subject: Re: OT: hardware reccomendations Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v481) Cc: questions@freebsd.org To: nathan@vidican.com From: "Chad Leigh -- Shire.Net LLC" In-Reply-To: <200204301824.g3UIObt11377@mail.ipsnetwork.net> Message-Id: <17248088-5C68-11D6-827D-000502EDE760@shire.net> Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.481) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, April 30, 2002, at 02:24 , Nathan Vidican wrote: > Can anyone suggest a place where from I may obtain a 2,3, or 4U rack- > mount chassis which has 3 (or more) ATA100 hot-swapable bays, can > accomidate a standard ATX system board, and has the option of coming > with redundant power supplies? The unit must also allow me to use three > PCI cards with it. Cost being the primary issue, I'd like to find > something $200 - $300. > If you want Red. PS in the system, your price is way too low. Most of those start at $450+ and with ATA100 hot swap probably over $500... Chad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:29:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from post.webmailer.de (natwar.webmailer.de [192.67.198.70]) by hub.freebsd.org (Postfix) with ESMTP id 1215637B417 for ; Tue, 30 Apr 2002 11:29:38 -0700 (PDT) Received: from hume (b-180-24-17.ma.dial.de.ignite.net [62.180.24.17]) by post.webmailer.de (8.9.3/8.8.7) with ESMTP id UAA05927; Tue, 30 Apr 2002 20:29:32 +0200 (MEST) Received: from lutz by hume with local (Exim 3.35 #1 (Debian)) id 172aqF-00026T-00; Tue, 30 Apr 2002 18:51:03 +0200 Date: Tue, 30 Apr 2002 18:51:03 +0200 From: Lutz Horn To: Mark Rowlands Cc: freebsd-questions@freebsd.org Subject: It works! (was: Xircom CreditCard 10/100 Configuration) Message-ID: <20020430165102.GA7944@lutz-horn.de> References: <20020427134911.GA2993@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net> <20020429194554.GA6406@lutz-horn.de> <200204292223.10553.mark.rowlands@minmail.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="0OAP2g/MAC+5xKAE" Content-Disposition: inline In-Reply-To: <200204292223.10553.mark.rowlands@minmail.net> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0OAP2g/MAC+5xKAE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi Mark, you saved me! Yes, it's true: your last advice made the card work. Thank you and everybody who followed this thread. * Mark Rowlands [20020429 22:23 +0200]: > more things to try.... again once again we are in wild shot in dark > territory... (I have a cem-56 which took a while to persuade to work.) >=20 > add to /etc/sysctl.conf=20 >=20 > machdep.pccard.mem_start=3D0xd0000 >=20 > /etc/rc.conf >=20 > pccard_mem=3D"0xd0000" >=20 > and if that don't work 0xd4000 or 0xd8000 Fortunately it works with 0xd0000. Regards Lutz --=20 Lutz Horn | GnuPG: 1024D/6EBDA359 1999-09-20 438D 31FC 9300 CED0 1CDE A19D CD0F 9CA2 6EBD A359 --0OAP2g/MAC+5xKAE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Weitere Infos: siehe http://www.gnupg.org iD8DBQE8zst2zQ+com69o1kRAlyuAJ9gESBOIW5lGJBbGvxVLFbHusYq0ACfZOJo xiP0Sv+Jsxpvjx7WHM6Q4dI= =6eqm -----END PGP SIGNATURE----- --0OAP2g/MAC+5xKAE-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 11:43:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web11601.mail.yahoo.com (web11601.mail.yahoo.com [216.136.172.53]) by hub.freebsd.org (Postfix) with SMTP id 7E0AD37B41F for ; Tue, 30 Apr 2002 11:43:23 -0700 (PDT) Message-ID: <20020430184323.72671.qmail@web11601.mail.yahoo.com> Received: from [24.191.164.44] by web11601.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 11:43:23 PDT Date: Tue, 30 Apr 2002 11:43:23 -0700 (PDT) From: Holt Grendal Subject: Bus error To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, After upgrading to freebsd 4.5-stable as of 6 days ago at random times some scripts that run from cron give this error: Bus error - core dumped Should I be worried? TIA Holt __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:12:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (115-7-237-24-cable.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id E2AFF37B41B for ; Tue, 30 Apr 2002 12:12:12 -0700 (PDT) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 251792E8; Tue, 30 Apr 2002 11:12:06 -0800 (AKDT) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul Reply-To: akbeech@sinbad.net To: Bill Moran , Simon Dick Subject: Re: burning an FBSD iso image using MS/Windows Date: Tue, 30 Apr 2002 11:12:05 -0800 X-Mailer: KMail [version 1.3] Cc: Joe & Fhe Barbish , Toomas Aas , FBSDQ References: <200204290601.g3T61ha08467@lv.raad.tartu.ee> <20020430152947.GA14709@irrelevant.org> <3CCECD35.1040302@potentialtech.com> In-Reply-To: <3CCECD35.1040302@potentialtech.com> Organization: Sinbad Network Communications MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020430191206.251792E8@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 08:58 am, Bill Moran wrote: > Simon Dick wrote: > > Easy CD Creator and CDRWIN can both burn ISOs properly from memory, > > read the manuals for more info as I can't remember how off the top of > > my head > > Make sure you're not using a CD-RW blank. Some windows-based CD software > won't burn ISOs properly on rewritable CDs. Whether this is a bug or > feature is beyond me (I'm not that versed in how CD burning works) it's > just been my experience. > Burning bootable FreeBSD CDs on CD-Rs has always worked for me, whatever > software I use (usually cdrecord, but occasionally different windows > programs as well) FYI, I use Nero and have had no problems burning any of the iso's. Just my .02 Beech Rintoul > > On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: > >>Could you please expand on this subject. > >>What is the manufacture of your cd r/w device? > >>What software do you use to write an iso image file so it gets > >>expanded into multiple files on the cd? > >>Do you know of any free software that will write iso image > >>to cd using MS/Windows? > >> > >>I have an HP 9500 and the software that came with it does not > >>write iso image files. I even emailed the HP tech support and they > >>said they know of no MS/Windows cd writer that writes iso image files > >>as expanded files. > >> > >>-----Original Message----- > >>From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] > >>Sent: Monday, April 29, 2002 2:00 AM > >>To: Joe & Fhe Barbish; freebsd-questions@freebsd.org > >>Subject: RE: Hello > >> > >>Hello! > >> > >>>The FBSD 4 CD set is available from many FBSD FTP sites. Many people > >>> think they can just download the ISO image, burn it to CD and away they > >>> go. Well here a news flash for you, it's not that easy. First of all > >>> the ISO image > >> > >>is > >> > >>>not supported in the MS/Windows world. Sure you can download it and burn > >> > >>it > >> > >>>to an CD using MS/Windows, but you end up with a data disk, not an > >> > >>bootable > >> > >>>CD, which it has to be to install from. > >> > >>What??? > >> > >>I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > >>using MS Windows and they have always turned out right (i.e. > >>bootable). > >>-- > >>Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > >>* How much net work could a network work, if a network could net work? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:15:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.prod.itd.earthlink.net (scaup.mail.pas.earthlink.net [207.217.120.49]) by hub.freebsd.org (Postfix) with ESMTP id 018DD37B425 for ; Tue, 30 Apr 2002 12:15:18 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by scaup.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 172d5n-00038O-00 for freebsd-questions@freebsd.org; Tue, 30 Apr 2002 12:15:15 -0700 Received: from mlevy.flncs.com (cylex [12.27.148.78]) by ns.flncs.com (Postfix) with ESMTP id 9196E5576 for ; Tue, 30 Apr 2002 15:18:37 -0400 (EDT) Message-Id: <5.1.0.14.2.20020430151612.038c2140@imap.flncs.com> X-Sender: mlevy@imap.flncs.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 30 Apr 2002 15:16:44 -0400 To: freebsd-questions@freebsd.org From: Moti Subject: stand by /failover solution for freebsd ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi , I've looked all over but cant find a fail over solution for freebsd . is that possible ? basically i want to have a standby firewall so if my firewall goes down for some reason the standby will take it's place any idea's ? thanks Moti To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:26:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gandalf.scott.sh (c19078.sunsh1.vic.optusnet.com.au [210.49.237.167]) by hub.freebsd.org (Postfix) with SMTP id 9B5F837B400 for ; Tue, 30 Apr 2002 12:26:17 -0700 (PDT) Received: from gandalf.scott.sh (localhost [127.0.0.1]) by gandalf.scott.sh (8.12.3/8.12.2) with ESMTP id g3UJQErD032380 for ; Wed, 1 May 2002 05:26:14 +1000 (EST) (envelope-from scotia@gandalf.scott.sh) Received: (from scotia@localhost) by gandalf.scott.sh (8.12.3/8.12.3/Submit) id g3UJQC0N032379 for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 05:26:12 +1000 (EST) Date: Wed, 1 May 2002 05:26:12 +1000 From: Scott To: freebsd-questions@FreeBSD.ORG Subject: resizing slices? Message-ID: <20020430192612.GA32360@gandalf.scott.sh> Mail-Followup-To: freebsd-questions@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I'm sure this has been posted before, but I couldn't find anything but russian pages. If I want to shrink the /var slice and add it to /usr, can I do this non-destructively? If so, what utility/command should I use. TIA Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:26:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpmail.dk.tiscali.com (mail.tiscali.dk [212.54.64.159]) by hub.freebsd.org (Postfix) with ESMTP id 4B94437B416 for ; Tue, 30 Apr 2002 12:26:47 -0700 (PDT) Received: from NEIGAARD_MOB (213.237.13.224) by cpmail.dk.tiscali.com (6.0.040) id 3C71582D000FDEFB; Tue, 30 Apr 2002 21:26:35 +0200 Date: Tue, 30 Apr 2002 21:25:36 +0200 From: =?ISO-8859-1?B?U/hyZW4gTmVpZ2FhcmQ=?= X-Mailer: The Bat! (v1.53d) Reply-To: =?ISO-8859-1?B?U/hyZW4gTmVpZ2FhcmQ=?= X-Priority: 3 (Normal) Message-ID: <14130797163.20020430212536@e-box.dk> To: Moti Cc: freebsd-questions@freebsd.org Subject: Re: stand by /failover solution for freebsd ? In-Reply-To: <5.1.0.14.2.20020430151612.038c2140@imap.flncs.com> References: <5.1.0.14.2.20020430151612.038c2140@imap.flncs.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Tuesday, April 30, 2002, 9:16:44 PM, Moti wrote: M> Hi , M> I've looked all over but cant find a fail over solution for freebsd . M> is that possible ? M> basically i want to have a standby firewall so if my firewall goes down for some reason the standby will take it's place M> any idea's ? M> thanks M> Moti http://www.bsdshell.net/ or http://bsdvault.net/sections.php?op=viewarticle&artid=90 or try to get heartbeat and mon running on FreeBSD. Hope that helps :) -- Med venlig hilsen/Best regards, Søren Neigaard mailto:neigaard@e-box.dk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:39: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blues.hodgsonhouse.com (blues.hodgsonhouse.com [24.72.10.211]) by hub.freebsd.org (Postfix) with ESMTP id 04A8E37B405 for ; Tue, 30 Apr 2002 12:39:00 -0700 (PDT) Received: (from tillman@localhost) by blues.hodgsonhouse.com (8.11.6/8.11.6) id g3UJcxv22555 for freebsd-questions@FreeBSD.ORG; Tue, 30 Apr 2002 13:38:59 -0600 Date: Tue, 30 Apr 2002 13:38:59 -0600 From: Tillman Hodgson To: freebsd-questions@FreeBSD.ORG Subject: Remounting NFS directories with different options Message-ID: <20020430133859.A22519@hodgsonhouse.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Editor: Vim Rocks! http://www.vim.org X-Mailer: Mutt Rocks! http://www.mutt.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Howdy, I have a directory (/exports/www) exported with as follows: /exports/www -ro -alldirs -maproot=tillman coyote I have a subdirectory (/exportes/www/project) that I want to export with read-write permissions. My first thought was to also explicitedly export it, but with different options: /exports/www/project -maproot=tillman coyote That didn't work, though. After kill -HUP'ing mountd, I had the following log entry: Apr 30 13:28:50 athena mountd[103]: can't change attributes for /exports/www/project Apr 30 13:28:50 athena mountd[103]: bad exports list line /exports/www/project -maproot The client seems to have thigns correctly mounted: [root@coyote www]# mount athena:/exports/www on /nfs/www (nfs, read-only) athena:/exports/www/project on /nfs/www/project (nfs) But it doesn't work as expected: [root@coyote www]# touch /nfs/www/project/test2 touch: /nfs/www/project/test2: Read-only file system Short of using completely seperate directory trees and using a mess of symlinks of the clients, is there a nice way to do this? TIA, - Tillman -- To give your sheep or cow a large spacious meadow is the way to control him. Shunryu Suzuki To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:40:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id D148437B404 for ; Tue, 30 Apr 2002 12:40:23 -0700 (PDT) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 2C59928B07; Tue, 30 Apr 2002 15:40:23 -0400 (EDT) Date: Tue, 30 Apr 2002 15:40:23 -0400 (EDT) From: Peter Leftwich X-X-Sender: To: Justin Heath Cc: FreeBSD LIST Subject: Re: OpenSSH and hosts.allow In-Reply-To: <5.1.0.14.2.20020428223215.02521ec0@mail.theplanet.com> Message-ID: <20020430153741.M10042-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 28 Apr 2002, Justin Heath wrote: > Peter, I am using SSHd version OpenSSH_2.9 (FreeBSD localisations 20020307). As you can see this is not installed from the ports. I am using /etc/hosts.allow. Which is where SSHd should be looking since it is part of the base system and not a port. Thanks. Oops, duh, I'd forgotten about that file (/etc/hosts.allow)! Honestly, thanks for the reminder - now I remember why sendmail isn't working properly (yet I can telnet port 25 of my box and deliver spoofed email). I would recommend you type `host my.domain.com` and use that IP in place of your "0.0.0.0: allow" example. > At 02:43 PM 4/28/2002 -0400, Peter Leftwich wrote: > >On Sun, 28 Apr 2002, Justin Heath wrote: > > > I am trying to set up sshd (OpenSSH) to use hosts.allow . The problem is that the rules seem to work with IP address but not host names. > > > Example - Works: sshd: 0.0.0.0: allow > > > Does not work: sshd: .domain.com: allow (nor) sshd: my.domain.com: allow > > > Any suggestions? Thanks. -Justin Heath > > Justin, Which version of OpenSSH (`sshd -v` this says illegal option, but then gives you the version on the next line of stderr output) are you using? What is the path to the hosts.allow file in your references? > Justin Heath Best of luck with it. I've heard various versions of ssh(d) support hostnames, and others are strictly IP-based. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:48:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mk-smarthost-2.mail.uk.tiscali.com (mk-smarthost-2.mail.uk.worldonline.com [212.74.112.72]) by hub.freebsd.org (Postfix) with ESMTP id 7A96937B416 for ; Tue, 30 Apr 2002 12:48:14 -0700 (PDT) Received: from [80.225.52.219] (helo=lineone.net) by mk-smarthost-2.mail.uk.tiscali.com with esmtp (Exim 3.35 #1) id 172db0-000DdM-00; Tue, 30 Apr 2002 20:47:31 +0100 Message-ID: <3CCEF4F4.F497FC51@lineone.net> Date: Tue, 30 Apr 2002 20:48:04 +0100 From: Jean-Mark Dupoux X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Bill Moran , Simon Dick , questions@freebsd.org Subject: Re: burning an FBSD iso image using MS/Windows Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG if the ISO file has transported correctly then you should be able to load it up under MS/Windows using something like daemon-tools, and then maybe try and run a "CD-copy" operation using whichever burning software, but frankly I've never resorted to it myself except for the sake of experimentation Jean-Mark jmdupoux_@_lineone.net > On Tuesday 30 April 2002 08:58 am, Bill Moran wrote: > > Simon Dick wrote: > > > Easy CD Creator and CDRWIN can both burn ISOs properly from memory, > > > read the manuals for more info as I can't remember how off the top of > > > my head > > > > Make sure you're not using a CD-RW blank. Some windows-based CD software > > won't burn ISOs properly on rewritable CDs. Whether this is a bug or > > feature is beyond me (I'm not that versed in how CD burning works) it's > > just been my experience. > > Burning bootable FreeBSD CDs on CD-Rs has always worked for me, whatever > > software I use (usually cdrecord, but occasionally different windows > > programs as well) > > FYI, I use Nero and have had no problems burning any of the iso's. > Just my .02 > Beech Rintoul > > > > On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: > > >>Could you please expand on this subject. > > >>What is the manufacture of your cd r/w device? > > >>What software do you use to write an iso image file so it gets > > >>expanded into multiple files on the cd? > > >>Do you know of any free software that will write iso image > > >>to cd using MS/Windows? > > >> > > >>I have an HP 9500 and the software that came with it does not > > >>write iso image files. I even emailed the HP tech support and they > > >>said they know of no MS/Windows cd writer that writes iso image files > > >>as expanded files. > > >> > > >>-----Original Message----- > > >>From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] > > >>Sent: Monday, April 29, 2002 2:00 AM > > >>To: Joe & Fhe Barbish; freebsd-questions@freebsd.org > > >>Subject: RE: Hello > > >> > > >>Hello! > > >> > > >>>The FBSD 4 CD set is available from many FBSD FTP sites. Many people > > >>> think they can just download the ISO image, burn it to CD and away they > > >>> go. Well here a news flash for you, it's not that easy. First of all > > >>> the ISO image > > >> > > >>is > > >> > > >>>not supported in the MS/Windows world. Sure you can download it and burn > > >> > > >>it > > >> > > >>>to an CD using MS/Windows, but you end up with a data disk, not an > > >> > > >>bootable > > >> > > >>>CD, which it has to be to install from. > > >> > > >>What??? > > >> > > >>I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > > >>using MS Windows and they have always turned out right (i.e. > > >>bootable). > > >>-- > > >>Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > > >>* How much net work could a network work, if a network could net work? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:53:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mambo.a1-office.biz (cm230.61.234.24.lvcm.com [24.234.61.230]) by hub.freebsd.org (Postfix) with ESMTP id C306737B416 for ; Tue, 30 Apr 2002 12:53:31 -0700 (PDT) Received: from cm240.61.234.24.lvcm.com (chris.a1-office.biz [24.234.61.240]) by mambo.a1-office.biz (8.12.1/8.12.1) with ESMTP id g3UJsWYV001495 for ; Tue, 30 Apr 2002 12:54:32 -0700 (PDT) Date: Tue, 30 Apr 2002 12:55:28 -0700 (PDT) From: Chris Angell To: freebsd-questions@freebsd.org Subject: Limits Message-ID: <20020430125347.S5274-100000@chris.a1-office.biz> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I need help restricting the amount of resources a process can utilize. I've tried settings in /etc/login.conf (yes I ran cap_mkdb /etc/login.conf) but nothing seems to work. I run this as root: perl -e'my @a=1;push @a, 1 for @a' & ...and watch as it uses all the ram and swap on the machine, until malloc returns false to perl (i.e. perl dies because it can't push anymore). Can anyone help me? Thanks a ton! Chris Angell To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:58:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id ED53037B404 for ; Tue, 30 Apr 2002 12:58:43 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g3UJthE86285; Tue, 30 Apr 2002 16:55:43 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 16:55:43 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: Cc: Subject: Re: tcpdump(8) filtered by time In-Reply-To: <20020430110056.B55983@blossom.cjclark.org> Message-ID: <20020430165309.R85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, Crist J. Clark wrote: > Slightly off-topic, but I'd like see if anyone has any ideas. > > I have a tcpdump(8) file that spans a few hours. I want to isolate > an hour somewhere in the middle and dump it to a new file. I can't > figure out how to do this. Doesn't tcpslice do something like that? From tcpslice(1) DESCRIPTION Tcpslice is a program for extracting portions of packet-trace files gen- erated using tcpdump(1)'s -w flag. It can also be used to glue together several such files, as discussed below. The basic operation of tcpslice is to copy to stdout all packets from its input file(s) whose timestamps fall within a given range. The starting and ending times of the range may be specified on the command line. All ranges are inclusive. The starting time defaults to the time of the first packet in the first input file; we call this the first time. The ending time defaults to ten years after the starting time. Thus, the command tcpslice trace-file simply copies trace-file to stdout (assuming the file does not include more than ten years' worth of data). Hope this helps. Fer > > I know how to workaround the issue to capture packets for 'x' amount > of time from the begining of the file[0], but I can't come up with a > way to grab packets starting at an offset somewhere past the beginning > (either by time or count). > > Anyone have any ideas on how to do this? I guess I'm stuck editing the > binary by hand or making my own tool to mess with the pcap(3) file? > > [0] To grab the first 'x' seconds (minutes, whatever), you can first > dump the file and print the packets. Run the printed output through > grep(1), awk(1), perl(1), or filter all but the packets up to the time > you want. Count the number of lines printed with wc(1) (of course, > with awk(1) or perl(1) you can just do the counting in the script > itself), and then use the '-c' argument of tcpdump(1), > > $ tcpdump -r big.pcap -c -w timed.pcap > > So, the abilty to specify arbitrary ranges of packets by count is > essentially equivalent to being able to do time ranges, but I still > can't figure out how to start at an offset by count. > -- > Crist J. Clark | cjclark@alum.mit.edu > | cjclark@jhu.edu > http://people.freebsd.org/~cjc/ | cjc@freebsd.org > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 12:59:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from db.nexgen.com (db.nexgen.com [209.208.217.13]) by hub.freebsd.org (Postfix) with SMTP id 8EEBA37B400 for ; Tue, 30 Apr 2002 12:59:17 -0700 (PDT) Received: (qmail 4324 invoked from network); 30 Apr 2002 17:13:18 -0000 Received: from localhost.nexgen.com (HELO alexus) (root@127.0.0.1) by localhost.nexgen.com with SMTP; 30 Apr 2002 17:13:18 -0000 Message-ID: <000901c1f06a$343e6af0$0d00a8c0@alexus> From: "alexus" To: Subject: merging partitions Date: Tue, 30 Apr 2002 13:12:27 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG is there a way to merge two partition into one? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13: 1:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web14805.mail.yahoo.com (web14805.mail.yahoo.com [216.136.224.221]) by hub.freebsd.org (Postfix) with SMTP id 67B2E37B41F for ; Tue, 30 Apr 2002 13:01:54 -0700 (PDT) Message-ID: <20020430200153.55251.qmail@web14805.mail.yahoo.com> Received: from [207.139.167.27] by web14805.mail.yahoo.com via HTTP; Tue, 30 Apr 2002 13:01:53 PDT Date: Tue, 30 Apr 2002 13:01:53 -0700 (PDT) From: Chris Appleton Subject: cpu option To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i'm trying to create a 4.4R kernel on a pIII 733. is there a particular cpu option for pIII (I786_CPU ?) or what will using I686_CPU do? thanks advance, chris __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13: 2:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id EEB6737B41A for ; Tue, 30 Apr 2002 13:02:00 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172dp1-0000l7-00 for questions@freebsd.org; Tue, 30 Apr 2002 13:01:59 -0700 Message-ID: <005b01c1f09b$2aca9080$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: Unshared C-Client? Date: Tue, 30 Apr 2002 16:02:56 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Where can I get an unshared version of C-Client? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13: 5:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from intergate.sdccd.cc.ca.us (intergate.sdccd.cc.ca.us [209.129.16.2]) by hub.freebsd.org (Postfix) with ESMTP id 13F5437B404 for ; Tue, 30 Apr 2002 13:05:12 -0700 (PDT) Received: from ntxdistrict.sdccd.cc.ca.us (ntxdistrict.sdccd.cc.ca.us [10.1.100.1]) by intergate.sdccd.cc.ca.us (8.9.1a/8.9.1) with ESMTP id NAA15538; Tue, 30 Apr 2002 13:03:44 -0700 (PDT) Received: by ntxdistrict.sdccd.cc.ca.us with Internet Mail Service (5.5.2654.89) id ; Tue, 30 Apr 2002 13:04:03 -0700 Message-ID: From: Erin Fortenberry To: "'Chris Appleton'" Cc: freebsd-questions@FreeBSD.ORG Subject: RE: cpu option Date: Tue, 30 Apr 2002 13:03:48 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2654.89) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Currently the i686 option covers; Pentium Pro Pentium 2 Pentium 3 Pentium 4 These were all built from the Pentium Pro core (more or less). The next time this will really change is with the 64bit processors. -Erin > -----Original Message----- > From: Chris Appleton [mailto:appleton_chris@yahoo.com] > Sent: Tuesday, April 30, 2002 1:02 PM > To: freebsd-questions@FreeBSD.ORG > Subject: cpu option > > > i'm trying to create a 4.4R kernel on a pIII 733. is there a > particular cpu option for pIII (I786_CPU ?) or what will > using I686_CPU > do? > > thanks advance, > > chris > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:13:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f34.law15.hotmail.com [64.4.23.34]) by hub.freebsd.org (Postfix) with ESMTP id EB11537B41A for ; Tue, 30 Apr 2002 13:13:29 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 Apr 2002 13:13:29 -0700 Received: from 206.27.239.253 by lw15fd.law15.hotmail.msn.com with HTTP; Tue, 30 Apr 2002 20:13:29 GMT X-Originating-IP: [206.27.239.253] From: "Adaline Tatum" To: freebsd-questions@FreeBSD.org Subject: UNIX FreeBSD Processing Environment Date: Tue, 30 Apr 2002 14:13:29 -0600 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 30 Apr 2002 20:13:29.0898 (UTC) FILETIME=[7EA180A0:01C1F083] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Please assist me by sending me some information by Thrusday morning on UNIX FreeBSD Processing Environment. This is for my end of semester project which is due on Thrusday. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:14: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id BED0837B41C for ; Tue, 30 Apr 2002 13:13:54 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id NAA23033; Tue, 30 Apr 2002 13:13:42 -0700 Message-ID: <3CCEFAF5.3020904@owt.com> Date: Tue, 30 Apr 2002 13:13:41 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: akbeech@sinbad.net Cc: Bill Moran , Simon Dick , Joe & Fhe Barbish , Toomas Aas , FBSDQ Subject: Re: burning an FBSD iso image using MS/Windows References: <200204290601.g3T61ha08467@lv.raad.tartu.ee> <20020430152947.GA14709@irrelevant.org> <3CCECD35.1040302@potentialtech.com> <20020430191206.251792E8@nebula.anchoragerescue.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Beech Rintoul wrote: > On Tuesday 30 April 2002 08:58 am, Bill Moran wrote: > >>Simon Dick wrote: >> >>>Easy CD Creator and CDRWIN can both burn ISOs properly from memory, >>>read the manuals for more info as I can't remember how off the top of >>>my head >>> >>Make sure you're not using a CD-RW blank. Some windows-based CD software >>won't burn ISOs properly on rewritable CDs. Whether this is a bug or >>feature is beyond me (I'm not that versed in how CD burning works) it's >>just been my experience. >>Burning bootable FreeBSD CDs on CD-Rs has always worked for me, whatever >>software I use (usually cdrecord, but occasionally different windows >>programs as well) >> > > FYI, I use Nero and have had no problems burning any of the iso's. > Just my .02 There is usually an option off of the the "File" menu line item. It is something like "Burn from Image" and it brings up a popup. The default is not *.iso but there is a pull down and when you click the down arrow and you will find iso's listed there. I tried to install a copy of Easy CD Creator 5 that I had, but had never installed, so I could capture an image but it won't install properly. It also will not recognize my HP 8100i as a burner. Some people have reported in the past that all you had to do was click the iso and it brings up the CD burner software. I started to collect that information as a web page (http://users.owt.com/kstewart/freebsd/iso-images.html) but have fallen behind on the latest versions. I quit updating to Adaptec/Roxio because they usually broke the latest release of Windows such as W2K for a time after a release. I think they don't do that anymore but I also have Nero-5.5.8 on my faster CDROM burner systems and they provide free upgrades as needed. As I upgrade systems, I hunt for new burners that supply Nero. When XP was release, email from Roxio indicated that you would have to buy an upgrade from to go from W2K (EzCD 5.0) to XP (EzCD 5.1). Kent > Beech Rintoul > > >>>On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: >>> >>>>Could you please expand on this subject. >>>>What is the manufacture of your cd r/w device? >>>>What software do you use to write an iso image file so it gets >>>>expanded into multiple files on the cd? >>>>Do you know of any free software that will write iso image >>>>to cd using MS/Windows? >>>> >>>>I have an HP 9500 and the software that came with it does not >>>>write iso image files. I even emailed the HP tech support and they >>>>said they know of no MS/Windows cd writer that writes iso image files >>>>as expanded files. >>>> >>>>-----Original Message----- >>>>From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] >>>>Sent: Monday, April 29, 2002 2:00 AM >>>>To: Joe & Fhe Barbish; freebsd-questions@freebsd.org >>>>Subject: RE: Hello >>>> >>>>Hello! >>>> >>>> >>>>>The FBSD 4 CD set is available from many FBSD FTP sites. Many people >>>>>think they can just download the ISO image, burn it to CD and away they >>>>>go. Well here a news flash for you, it's not that easy. First of all >>>>>the ISO image >>>>> >>>>is >>>> >>>> >>>>>not supported in the MS/Windows world. Sure you can download it and burn >>>>> >>>>it >>>> >>>> >>>>>to an CD using MS/Windows, but you end up with a data disk, not an >>>>> >>>>bootable >>>> >>>> >>>>>CD, which it has to be to install from. >>>>> >>>>What??? >>>> >>>>I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) >>>>using MS Windows and they have always turned out right (i.e. >>>>bootable). >>>>-- >>>>Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ >>>>* How much net work could a network work, if a network could net work? >>>> > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > . > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:14:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id EA58837B416 for ; Tue, 30 Apr 2002 13:14:23 -0700 (PDT) Received: from k6-2-300.tisys.org (ppp-175.wobline.de [212.68.69.183]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/sh-2002041503) with ESMTP id g3UKEEI17220; Tue, 30 Apr 2002 22:14:14 +0200 Received: from tisys.org (palomino-1533.tisys.org [192.168.0.3]) by k6-2-300.tisys.org (8.12.3/8.12.3) with ESMTP id g3UKFTo2040398; Tue, 30 Apr 2002 22:15:30 +0200 (CEST) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.12.3/8.12.3/Submit) id g3UKETtb027289; Tue, 30 Apr 2002 22:14:29 +0200 (CEST) Date: Tue, 30 Apr 2002 22:14:29 +0200 From: Nils Holland To: Holt Grendal Cc: questions@FreeBSD.ORG Subject: Re: Bus error Message-ID: <20020430221429.A27035@daemon.tisys.org> References: <20020430184323.72671.qmail@web11601.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020430184323.72671.qmail@web11601.mail.yahoo.com>; from holtor@yahoo.com on Tue, Apr 30, 2002 at 11:43:23AM -0700 X-Operating-System: FreeBSD palomino-1533.tisys.org 4.5-STABLE FreeBSD 4.5-STABLE X-Machine-Uptime: 10:07PM up 12:26, 1 user, load averages: 0.00, 0.02, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 11:43:23AM -0700, Holt Grendal stood up and spoke: > Hi, > > After upgrading to freebsd 4.5-stable as of 6 days ago at random > times some scripts that run from cron give this error: > > Bus error - core dumped > > Should I be worried? Probably. If we knew what these scripts you are running from cron are supposed to do, it would probably be easier to get an insight on what may be wrong here. Greetings Nils -- Nils Holland Ti Systems - http://www.tisys.org Addicted to computing since 1987 High on FreeBSD since 1996 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:18:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ebert.xypoint.com (ebert.xypoint.com [216.190.251.65]) by hub.freebsd.org (Postfix) with ESMTP id 65D8737B41C for ; Tue, 30 Apr 2002 13:18:51 -0700 (PDT) Received: by ebert.xypoint.com with Internet Mail Service (5.5.2655.55) id ; Tue, 30 Apr 2002 13:18:36 -0700 Message-ID: <38985D9205A0D411A10500508B10DE6602997793@ebert.xypoint.com> From: Ryan Hill To: "'freebsd-questions@freebsd.org'" Subject: RE: ifconfig syntax in rc.conf Date: Tue, 30 Apr 2002 13:18:35 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG mark, this is cool - thanks! is this documented somewhere and I just blatantly missed it? regards, ryan > -----Original Message----- > From: Neil Darlow [mailto:neil@darlow.co.uk] > Sent: Tuesday, April 30, 2002 11:17 AM > To: freebsd-questions@freebsd.org > Subject: RE: ifconfig syntax in rc.conf > > > Alternatively, you can create a file named /etc/start_if.de0 > with contents: > > ifconfig de0 media 10baseTX > > Regards, > Neil Darlow M.Sc. > -- > 1024D/531F9048 1999-09-11 Neil Darlow > GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:21:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtpproxy1.mitre.org (smtpproxy1.mitre.org [129.83.20.90]) by hub.freebsd.org (Postfix) with ESMTP id AD92E37B484 for ; Tue, 30 Apr 2002 13:20:51 -0700 (PDT) Received: from avsrv1.mitre.org (avsrv1.mitre.org [129.83.20.58]) by smtpproxy1.mitre.org (8.11.3/8.11.3) with ESMTP id g3UKKoi22323 for ; Tue, 30 Apr 2002 16:20:50 -0400 (EDT) Received: from MAILHUB2 (mailhub2.mitre.org [129.83.221.18]) by smtpsrv1.mitre.org (8.11.3/8.11.3) with ESMTP id g3UKKnh20940 for ; Tue, 30 Apr 2002 16:20:49 -0400 (EDT) Received: from dhcp-105-164.mitre.org (128.29.105.164) by mailhub2.mitre.org with SMTP id 10065252; Tue, 30 Apr 2002 16:20:44 -0400 Message-ID: <3CCEFC9D.BE230274@mitre.org> Date: Tue, 30 Apr 2002 16:20:45 -0400 From: Jason Andresen Organization: The MITRE Corporation X-Mailer: Mozilla 4.75 [en]C-20000818M (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Rate limiting FTP traffic Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've been looking for a way to rate limit ftp traffic, but so far I've had no success. Is there a way in FreeBSD to limit FTP traffic and not affect other traffic on the machine. At first I was looking at dummynet, but because FTP chooses ports from the empherial port range, I don't see how to make it work. Does anybody know how to do it? Please CC: this directly to me, as I am not on this list. Thank you. -- \ |_ _|__ __|_ \ __| Jason Andresen jandrese@mitre.org |\/ | | | / _| Network and Distributed Systems Engineer _| _|___| _| _|_\___| Office: 703-883-7755 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:21:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.navitaire.com (mail.navitaire.com [205.182.62.81]) by hub.freebsd.org (Postfix) with ESMTP id 9E76037B487 for ; Tue, 30 Apr 2002 13:20:55 -0700 (PDT) Received: from exchange.Navitaire.com (exch.navitaire.com [149.122.4.14]) by mail.navitaire.com (Switch-2.1.4/Switch-2.1.0) with ESMTP id g3UKKwg19869 for ; Tue, 30 Apr 2002 15:20:58 -0500 (CDT) Received: by exchange.Navitaire.com with Internet Mail Service (5.5.2653.19) id <2R5MDDD7>; Tue, 30 Apr 2002 15:20:14 -0500 Message-ID: From: "Henning, Brian" To: questions@FreeBSD.ORG Subject: burning software Date: Tue, 30 Apr 2002 15:20:13 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello- I have a quick question about cd burning. Is there a shell for burncd for x-windows? I have an ide burner and I could use something simple and easy to burn cds. Could some one point to the location in the ports dir or maybe to a package? Thanks, brian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:22: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.comcast.net (smtp.comcast.net [24.153.64.2]) by hub.freebsd.org (Postfix) with ESMTP id D19EA37B419 for ; Tue, 30 Apr 2002 13:21:26 -0700 (PDT) Received: from cc804434a (bgp969106bgs.detrtc01.mi.comcast.net [68.42.174.188]) by mtaout01.icomcast.net (iPlanet Messaging Server 5.1 HotFix 0.3 (built Apr 8 2002)) with SMTP id <0GVE00MA8DVQU2@mtaout01.icomcast.net> for freebsd-questions@FreeBSD.ORG; Tue, 30 Apr 2002 16:21:26 -0400 (EDT) Date: Tue, 30 Apr 2002 16:32:03 -0700 From: alexsan10@comcast.net Subject: GiveConsole exits with a nonzero status .... no space on device .. To: freebsd-questions@FreeBSD.ORG Message-id: <002a01c1f09f$3bcea7f0$bcae2a44@cc804434a> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 X-Mailer: Microsoft Outlook Express 5.00.2919.6700 Content-type: multipart/alternative; boundary="Boundary_(ID_akmUdZmjlZpVXl9vOpM8Fw)" X-Priority: 3 X-MSMail-priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --Boundary_(ID_akmUdZmjlZpVXl9vOpM8Fw) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT To anyone who knows: my version of Mandrake-Linux is 8.0 & have recently encountered a problem with all a my XFree86 sessions " GiveConsole exited with a nonzero status " by adding a zero status to GiveConsole script i 've been successful in only reaching somekind a default session with only xterm & twm whassup wit all a this, huh? many thanx! --Boundary_(ID_akmUdZmjlZpVXl9vOpM8Fw) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT
To anyone who knows:
 
        my version of Mandrake-Linux is 8.0 & have recently encountered a problem with all a my XFree86 sessions " GiveConsole exited with a nonzero status "
 
by adding a zero status to GiveConsole script i 've been successful in only reaching somekind a default session with only xterm & twm
            whassup wit all a this, huh?
many thanx!
--Boundary_(ID_akmUdZmjlZpVXl9vOpM8Fw)-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:23:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blues.hodgsonhouse.com (blues.hodgsonhouse.com [24.72.10.211]) by hub.freebsd.org (Postfix) with ESMTP id D80F037B417 for ; Tue, 30 Apr 2002 13:23:10 -0700 (PDT) Received: (from tillman@localhost) by blues.hodgsonhouse.com (8.11.6/8.11.6) id g3UKNAL22714 for freebsd-questions@FreeBSD.ORG; Tue, 30 Apr 2002 14:23:10 -0600 Date: Tue, 30 Apr 2002 14:23:10 -0600 From: Tillman Hodgson To: freebsd-questions@FreeBSD.ORG Subject: Re: Remounting NFS directories with different options Message-ID: <20020430142310.A22703@hodgsonhouse.com> References: <20020430133859.A22519@hodgsonhouse.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020430133859.A22519@hodgsonhouse.com>; from tillman@hodgsonhouse.com on Tue, Apr 30, 2002 at 01:38:59PM -0600 X-Editor: Vim Rocks! http://www.vim.org X-Mailer: Mutt Rocks! http://www.mutt.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 01:38:59PM -0600, Tillman Hodgson wrote: > Short of using completely seperate directory trees and using a mess of > symlinks of the clients, is there a nice way to do this? Respondign to my own email, it looks like mountd doesn't support this. The thread I followed is at http://groups.google.ca/groups?hl=en&th=564cf51af93551a1&rnum=1 - Tillman -- One day Chao-chou fell down in the snow, and called out, "Help me up! Help me up!". A monk came and lay down beside him. Chao-chou got up and went away. - Zen koan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:29:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from phxby.engr.usu.edu (phxby.engr.usu.edu [129.123.21.101]) by hub.freebsd.org (Postfix) with ESMTP id 7699937B400 for ; Tue, 30 Apr 2002 13:29:42 -0700 (PDT) Received: by phxby.engr.usu.edu (Postfix, from userid 501) id B7F39B04B7; Tue, 30 Apr 2002 14:29:33 -0600 (MDT) Date: Tue, 30 Apr 2002 14:29:33 -0600 From: Irwan Hadi To: Jason Andresen Cc: freebsd-questions@freebsd.org Subject: Re: Rate limiting FTP traffic Message-ID: <20020430142933.A5827@phxby.com> Mail-Followup-To: Jason Andresen , freebsd-questions@freebsd.org References: <3CCEFC9D.BE230274@mitre.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3CCEFC9D.BE230274@mitre.org>; from jandrese@mitre.org on Tue, Apr 30, 2002 at 04:20:45PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 04:20:45PM -0400, Jason Andresen wrote: > I've been looking for a way to rate limit ftp traffic, but so far > I've had no success. Is there a way in FreeBSD to limit FTP traffic > and not affect other traffic on the machine. > > At first I was looking at dummynet, but because FTP chooses ports from > the empherial port range, I don't see how to make it work. > > Does anybody know how to do it? > > Please CC: this directly to me, as I am not on this list. Thank you. If you want the easy way, you can try to use pure-ftpd which has built in traffic shaping capability. If you want the hard way, you can try to see this http://www.freebsd-howto.com/HOWTO/Ipfw-HOWTO To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:32: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id 69DB337B41A for ; Tue, 30 Apr 2002 13:32:02 -0700 (PDT) Received: from jud [12.33.164.6] by myrealbox.com with NIMS ModWeb Module; Tue, 30 Apr 2002 16:32:04 -0400 Subject: Re: Re: Boot Manager Conversion From: Jud To: bc3910@yahoo.com Cc: richardh@wsonline.net, freebsd-questions@FreeBSD.ORG Date: Tue, 30 Apr 2002 16:32:04 -0400 X-Mailer: NIMS ModWeb Module X-Sender: jud MIME-Version: 1.0 Message-ID: <1020198724.58c92ffcjud@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----Original Message----- From: Bryan Curl To: RichardH , freebsd-questions Date: Tue, 30 Apr 2002 09:23:33 -0700 (PDT) Subject: Re: Boot Manager Conversion That's exactly what I was attempting to do. All three OS's are on seperate= drives. My win98 drive has an MBR. My mandrake boots from a floppy using= Lilo. My FreeBSD drive has an MBR so I currently have to swap the win98 = with the BSD drive as required. I tried to simply put an entry in Lilo for the BSD drive but have not had g= ood success defining the "boot=3D" variable. Perhaps th= ere is a table entry somewhere on the floppy and the set up needs to be s= imilar to the win98 entry, I don't know. My goal is to have Primary Master=3DWin98(w/MBR), Primary Slave=3DMandrake,= Secondary Master=3DToshiba CD-RW/DVD, Secondary Slave=3DFreeBSD. [snip] _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Would grub from the FreeBSD ports (/usr/ports/sysutils/grub) serve your pur= pose? Don't know if you're familiar with it from the Linux world and don= 't care for it, but if that's not the situation, you may want to do some = reading and see if it will work for you. Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:36: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from exchmx2.lsuhsc.edu (exchmx2.lsuhsc.edu [155.58.212.90]) by hub.freebsd.org (Postfix) with ESMTP id BC7FE37B419 for ; Tue, 30 Apr 2002 13:35:53 -0700 (PDT) Received: by exchmx2.lsuhsc.edu with Internet Mail Service (5.5.2653.19) id <2H7J6SXV>; Tue, 30 Apr 2002 15:34:39 -0500 Message-ID: From: "Mire, John" To: 'Jean-Mark Dupoux' , Bill Moran , Simon Dick , questions@freebsd.org Subject: RE: burning an FBSD iso image using MS/Windows Date: Tue, 30 Apr 2002 15:33:21 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Pull down a program like MD5summer v1.1.0.19 http://homepages.ihug.co.nz/~floydian/md5/ Have a program like Easy CD Creator 4 installed. fetch the .iso images and xfer to your windows box, I use fetch on the fbsd box and SSH Secure Shell 3.1.0 w/sftp to pull over to my Win2k box. use MD5summer to check hashes against the md5 on the website get a blank CD-R double-click on the .iso image and when the Open With... dialog box appears either select Adaptec EasyCDCreator or click on other and navigate to the directory where creatr32.exe resides (Program Files\Adaptec\Easy CD Creator 4\)associate .iso files with this application. The CD Creation Setup dialog appears, choose your options and hit okay when prompted to place a blank in drive, do so and let it burn... NB: disable any system scanning virus software before you start in a pinch I have used CD-RW in place of a CD-R CD-CD copying for various Windows install CDs....MSSQL7,MSSQL2k,WIN98SE, DEBIAN 2.2rev5-1, the program recognises the difference and notifies you but you can check the box to ignore the diff and it'll treat it like a CD-R -----Original Message----- From: Jean-Mark Dupoux [mailto:jmdupoux@lineone.net] Sent: Tuesday, April 30, 2002 2:48 PM To: Bill Moran; Simon Dick; questions@freebsd.org Subject: Re: burning an FBSD iso image using MS/Windows if the ISO file has transported correctly then you should be able to load it up under MS/Windows using something like daemon-tools, and then maybe try and run a "CD-copy" operation using whichever burning software, but frankly I've never resorted to it myself except for the sake of experimentation Jean-Mark jmdupoux_@_lineone.net > On Tuesday 30 April 2002 08:58 am, Bill Moran wrote: > > Simon Dick wrote: > > > Easy CD Creator and CDRWIN can both burn ISOs properly from memory, > > > read the manuals for more info as I can't remember how off the top of > > > my head > > > > Make sure you're not using a CD-RW blank. Some windows-based CD software > > won't burn ISOs properly on rewritable CDs. Whether this is a bug or > > feature is beyond me (I'm not that versed in how CD burning works) it's > > just been my experience. > > Burning bootable FreeBSD CDs on CD-Rs has always worked for me, whatever > > software I use (usually cdrecord, but occasionally different windows > > programs as well) > > FYI, I use Nero and have had no problems burning any of the iso's. > Just my .02 > Beech Rintoul > > > > On Tue, Apr 30, 2002 at 11:00:29AM -0400, Joe & Fhe Barbish wrote: > > >>Could you please expand on this subject. > > >>What is the manufacture of your cd r/w device? > > >>What software do you use to write an iso image file so it gets > > >>expanded into multiple files on the cd? > > >>Do you know of any free software that will write iso image > > >>to cd using MS/Windows? > > >> > > >>I have an HP 9500 and the software that came with it does not > > >>write iso image files. I even emailed the HP tech support and they > > >>said they know of no MS/Windows cd writer that writes iso image files > > >>as expanded files. > > >> > > >>-----Original Message----- > > >>From: Toomas Aas [mailto:toomas.aas@raad.tartu.ee] > > >>Sent: Monday, April 29, 2002 2:00 AM > > >>To: Joe & Fhe Barbish; freebsd-questions@freebsd.org > > >>Subject: RE: Hello > > >> > > >>Hello! > > >> > > >>>The FBSD 4 CD set is available from many FBSD FTP sites. Many people > > >>> think they can just download the ISO image, burn it to CD and away they > > >>> go. Well here a news flash for you, it's not that easy. First of all > > >>> the ISO image > > >> > > >>is > > >> > > >>>not supported in the MS/Windows world. Sure you can download it and burn > > >> > > >>it > > >> > > >>>to an CD using MS/Windows, but you end up with a data disk, not an > > >> > > >>bootable > > >> > > >>>CD, which it has to be to install from. > > >> > > >>What??? > > >> > > >>I have downloaded and burned several ISO images (3.2, 3.4, 4.4, 4.5) > > >>using MS Windows and they have always turned out right (i.e. > > >>bootable). > > >>-- > > >>Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > > >>* How much net work could a network work, if a network could net work? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:36:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (115-7-237-24-cable.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 5327C37B419 for ; Tue, 30 Apr 2002 13:36:22 -0700 (PDT) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id 2381639F; Tue, 30 Apr 2002 12:36:13 -0800 (AKDT) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul Reply-To: akbeech@sinbad.net To: "Adaline Tatum" , freebsd-questions@FreeBSD.org Subject: Re: UNIX FreeBSD Processing Environment Date: Tue, 30 Apr 2002 12:36:12 -0800 X-Mailer: KMail [version 1.3] References: In-Reply-To: Organization: Sinbad Network Communications MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020430203613.2381639F@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 12:13 pm, Adaline Tatum wrote: > Please assist me by sending me some information by Thrusday morning on UNIX > FreeBSD Processing Environment. This is for my end of semester project > which is due on Thrusday. > All of this information is available on the website: http://www.freebsd.org You will probably find the handbook helpful. Beech -- ------------------------------------------------------------------- Beech Rintoul - SysAdmin - akbeech@sinbad.net /"\ ASCII Ribbon Campaign | Sinbad Network Communications \ / - NO HTML/RTF in e-mail | 3101 Penland Parkway #K-38 X - NO Word docs in e-mail | Anchorage, AK 99508-1957 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:37:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 42C3837B419 for ; Tue, 30 Apr 2002 13:37:11 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3UKb2U03102; Tue, 30 Apr 2002 16:37:02 -0400 Message-ID: <3CCF01A4.1000906@potentialtech.com> Date: Tue, 30 Apr 2002 16:42:12 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Adaline Tatum Cc: freebsd-questions@FreeBSD.org Subject: Re: UNIX FreeBSD Processing Environment References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Adaline Tatum wrote: > Please assist me by sending me some information by Thrusday morning on > UNIX FreeBSD Processing Environment. This is for my end of semester > project which is due on Thrusday. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html http://www.freebsd.org/cgi/man.cgi?manpath=FreeBSD+4.5-stable I hope you get this before Thrusday. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:38:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sfmail.looksmart.com (sf.looksmart.com [64.241.242.135]) by hub.freebsd.org (Postfix) with ESMTP id 5BA0F37B41D; Tue, 30 Apr 2002 13:38:27 -0700 (PDT) Received: by sfmail.looksmart.com with Internet Mail Service (5.5.2653.19) id ; Tue, 30 Apr 2002 13:38:22 -0700 Message-ID: <931CD0CD4D2BD411AB7C00508BC7557C034BC024@sfmail3.looksmart.com> From: David Zhuo To: "'questions@FreeBSD.org'" , "'doc@FreeBSD.org'" Subject: ahc1: Someone reset channel A Date: Tue, 30 Apr 2002 13:38:21 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, i am trying to install FreeBSD 4.5 from the ISO image downloaded from your website. after resolving all conflicts, save and quit. i am suppose to jump to the Sysinstall main menu but instead i got the following printed endlessly to my screen: ahc1: Someone reset channel A what does that mean? and how to i fix this? david To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:41:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-send.myrealbox.com (smtp-send.myrealbox.com [192.108.102.143]) by hub.freebsd.org (Postfix) with ESMTP id BFE4037B404 for ; Tue, 30 Apr 2002 13:41:07 -0700 (PDT) Received: from jud [12.33.164.6] by myrealbox.com with NIMS ModWeb Module; Tue, 30 Apr 2002 16:41:09 -0400 Subject: Re: UNIX FreeBSD Processing Environment From: Jud To: adeline60@hotmail.com Cc: freebsd-questions@FreeBSD.org Date: Tue, 30 Apr 2002 16:41:09 -0400 X-Mailer: NIMS ModWeb Module X-Sender: jud MIME-Version: 1.0 Message-ID: <1020199269.58c92ffcjud@myrealbox.com> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----Original Message----- From: "Adaline Tatum" To: freebsd-questions@FreeBSD.org Date: Tue, 30 Apr 2002 14:13:29 -0600 Subject: UNIX FreeBSD Processing Environment Please assist me by sending me some information by Thrusday morning on UNIX= =20 FreeBSD Processing Environment. This is for my end of semester project=20 which is due on Thrusday. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ This is a mailing list used on a voluntary basis by folks interested in the= FreeBSD operating system. There's no "central authority" to send you in= formation. I'd suggest Google, Google Groups, and perhaps other search e= ngines; books, such as Greg Lehey's "The Complete FreeBSD;" and the FreeB= SD web site, http://www.freebsd.org, as places where you might start your= search for information. If you have done some research and have a specific question, please feel fr= ee to ask it here (after searching in Google Groups to see if it's been a= sked and answered on this list before). Good luck! Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:47:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 9526637B417 for ; Tue, 30 Apr 2002 13:47:16 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g3UKlEr49885 for ; Tue, 30 Apr 2002 21:47:15 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200204302047.g3UKlEr49885@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: screen package - no resizing, doesn't recognize keyboard backspace Date: Tue, 30 Apr 2002 21:47:11 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, The functionality of the screen terminal interface is defined in the termcap database (the source of which is located in /usr/share/misc/termcap). Look for a section beginning: SC|screen|VT 100 and read-up on cap_mkdb. The info file for screen describes various methods of adjusting the VT100 emulation performed by the program but quite possibly it may just be down to how you invoke the program. If you set the TERM environment variable before invoking screen you may achieve what you desire. For a bourne-compatible shell on the local system you would use: TERM=vt100 screen For a remote session over a SSH connection and a bourne-compatible shell you would use: TERM=vt100 ssh -l username remotehost screen I have found that setting TERM=vt100 helps with the functioning of Backspace and Delete keys for programs like emacs21. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:49:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.takas.lt (mail-src.takas.lt [212.59.31.77]) by hub.freebsd.org (Postfix) with ESMTP id A0EF237B43A; Tue, 30 Apr 2002 13:49:10 -0700 (PDT) Received: from mfa.vip.mail.tpe.yahoo.com ([213.190.46.17]) by mail.takas.lt with Microsoft SMTPSVC(5.0.2195.2966); Tue, 30 Apr 2002 22:49:02 +0200 From: "Carla" To: "dielqosgh@aol.com" Subject: It will work for you Content-Type: text/plain; charset="us-ascii";format=flowed Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Outlook Express 5.00.2615.200 Message-ID: X-OriginalArrivalTime: 30 Apr 2002 20:49:08.0173 (UTC) FILETIME=[79245FD0:01C1F088] Date: 30 Apr 2002 22:49:08 +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG As seen on NBC, CBS, CNN, and even Oprah! The health discovery that actually reverses aging while burning fat, without dieting or exercise! This proven discovery has even been reported on by the New England Journal of Medicine. Forget aging and dieting forever! And it's Guaranteed! Click here: http://66.231.133.70/sj1/index.html Would you like to lose weight while you sleep! No dieting! No hunger pains! No Cravings! No strenuous exercise! Change your life forever! 100% GUARANTEED! 1.Body Fat Loss 82% improvement. 2.Wrinkle Reduction 61% improvement. 3.Energy Level 84% improvement. 4.Muscle Strength 88% improvement. 5.Sexual Potency 75% improvement. 6.Emotional Stability 67% improvement. 7.Memory 62% improvement. *********************************************************** You are receiving this email as a subscriber to the Opt-In America Mailing List. To unsubscribe from future offers, just click here: mailto:affiliateoptout@btamail.net.cn?Subject=off To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 13:57:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f52.sea1.hotmail.com [207.68.163.52]) by hub.freebsd.org (Postfix) with ESMTP id 88EC137B417 for ; Tue, 30 Apr 2002 13:57:19 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 Apr 2002 13:47:22 -0700 Received: from 156.153.255.243 by sea1fd.sea1.hotmail.msn.com with HTTP; Mon, 29 Apr 2002 23:00:05 GMT X-Originating-IP: [156.153.255.243] From: "Carolyn Longfoot" To: freebsd-questions@freebsd.org Subject: NAT/DNS/WEB Date: Mon, 29 Apr 2002 19:00:05 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 30 Apr 2002 20:47:22.0902 (UTC) FILETIME=[3A654B60:01C1F088] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a machine that's a dual homed host running NAT and DNS, connected to the outside world with a static IP. It seems I can nslookup 'www.mydomain.com' from the outside, so I think my DNS responds to lookups from the outside. I am pointing 'WWW' via DNS to a separate machine called web.mydomain.com but for some reason from the outside I cannot get to www.mydomain.com. It is working from the inside however. My confusion is therefore the following: how can I test that outside DNS queries are resolved correctly and why would requests for www... not get routed to the Web server? I'm pretty sure nothing relevant (UDP 53 or IP 80) gets dropped by the firewall btw. This is my first attempt at DNS so please be gentle :-) I'm looking for a conceptual answer but I can follow up with config files if it helps. I read some old posts at 'Ask Mr.DNS' that talked about running 'split DNS'. Is that still necessary? Thanks so much, Caro _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14: 0:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server5.safepages.com (server5.safepages.com [216.127.146.2]) by hub.freebsd.org (Postfix) with ESMTP id 3084D37B42C for ; Tue, 30 Apr 2002 14:00:19 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool40-149.nas36.philadelphia1.pa.us.da.qwest.net [65.129.40.149]) by server5.safepages.com (Postfix) with ESMTP id D22E72AC61 for ; Tue, 30 Apr 2002 21:00:06 +0000 (GMT) Content-Type: text/plain; charset="us-ascii" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: freebsd-questions@FreeBSD.org Subject: How to enable IP Forwarding Date: Tue, 30 Apr 2002 17:00:14 -0400 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204301700.14233.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Which option should I use to enable IP Forwarding in rc.conf? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14: 5:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id BA7D537B404 for ; Tue, 30 Apr 2002 14:05:16 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g3UL28E86634; Tue, 30 Apr 2002 18:02:09 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 18:02:08 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: "E. J. Cerejo" Cc: Subject: Re: How to enable IP Forwarding In-Reply-To: <200204301700.14233.ecerejo@zapo.net> Message-ID: <20020430180125.I85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, E. J. Cerejo wrote: > Which option should I use to enable IP Forwarding in rc.conf? gateway_enable="YES" Fer > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14: 8:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 99D5037B400 for ; Tue, 30 Apr 2002 14:08:41 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3UL8hU03480; Tue, 30 Apr 2002 17:08:43 -0400 Message-ID: <3CCF0910.1020306@potentialtech.com> Date: Tue, 30 Apr 2002 17:13:52 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Carolyn Longfoot Cc: freebsd-questions@freebsd.org Subject: Re: NAT/DNS/WEB References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Carolyn Longfoot wrote: > I have a machine that's a dual homed host running NAT and DNS, connected > to the outside world with a static IP. It seems I can nslookup > 'www.mydomain.com' from the outside, so I think my DNS responds to > lookups from the outside. If nslookup from a machine on the internet resolves the name to the proper address, then your DNS is correct. A simple "ping www.mydomain.com" will tell you whether or not the DNS resolved. If you then can't contact that machine, well, it's not DNS that's the problem. > I am pointing 'WWW' via DNS to a separate machine called > web.mydomain.com but for some reason from the outside I cannot get to > www.mydomain.com. It is working from the inside however. What's the IP address of the www machine? If it's a private IP addy, you'll get this behaviour. > My confusion is therefore the following: how can I test that outside DNS > queries are resolved correctly and why would requests for www... not get > routed to the Web server? Use nslookup, if it gives you the right number but you can't contact it, then the DNS is correct but something else is wrong. > I'm pretty sure nothing relevant (UDP 53 or IP 80) gets dropped by the > firewall btw. But is the routing information correct? > This is my first attempt at DNS so please be gentle :-) I'm looking for > a conceptual answer but I can follow up with config files if it helps. I > read some old posts at 'Ask Mr.DNS' that talked about running 'split > DNS'. Is that still necessary? Depends. The machine that's running the web server, is it actually accessible from the Internet? If not, you'll either need another IP address or to alias via NAT. If you alias, you'll make your DNS entry for www point to the machine that has the static IP, then you'll configure that machine to pass the request through to the real webserver. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14: 9:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.mail.pas.earthlink.net (hawk.mail.pas.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 1F06F37B419 for ; Tue, 30 Apr 2002 14:09:51 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by hawk.mail.pas.earthlink.net with esmtp (Exim 3.33 #2) id 172esX-0006ec-00; Tue, 30 Apr 2002 14:09:41 -0700 Received: from mlevy.flncs.com (cylex [12.27.148.78]) by ns.flncs.com (Postfix) with ESMTP id 004555576; Tue, 30 Apr 2002 17:13:01 -0400 (EDT) Message-Id: <5.1.0.14.2.20020430171011.03881a58@imap.flncs.com> X-Sender: mlevy@imap.flncs.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 30 Apr 2002 17:11:04 -0400 To: ecerejo@zapo.net From: Moti Subject: Re: How to enable IP Forwarding Cc: freebsd-questions@FreeBSD.org In-Reply-To: <200204301700.14233.ecerejo@zapo.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 05:00 PM 4/30/2002 -0400, E. J. Cerejo wrote: >Which option should I use to enable IP Forwarding in rc.conf? > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message gateway_enable="YES" # Set to YES if this host will be a gateway. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:11:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from stella.pyramus.com (stella.pyramus.com [206.129.206.3]) by hub.freebsd.org (Postfix) with ESMTP id 7410A37B419 for ; Tue, 30 Apr 2002 14:11:19 -0700 (PDT) Received: from pyramus.com (dark-star.pyramus.com [206.129.206.6]) by stella.pyramus.com (8.11.6/8.9.3) with ESMTP id g3ULFim79189 for ; Tue, 30 Apr 2002 14:15:44 -0700 (PDT) (envelope-from blake@pyramus.com) Message-ID: <3CCF0A42.F52C96E2@pyramus.com> Date: Tue, 30 Apr 2002 14:18:58 -0700 From: Blake Swensen X-Mailer: Mozilla 4.74 [en]C-DIAL (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: FreeBSD List Subject: 4.5-RELEASE oddities (read:flamebait) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok, what is the deal with 4.5 release? I have been using FreeBSD since 1.0 and have installed every release branch for a total of hundreds of times. The other day I downloaded the ISO for 4.5 and installed it on an HP Vectra. I got it going in a matter of hours. After using it for a day or two I attempted to use the whereis command and got an Perl syntax error in /usr/bin/whereis. I fixed that and then noticed that makewhatis was crashing with a similar perl error during cron. So I thought...hmmm, maybe my ISO was corrupted or the snapshot it was made from wasn't quite right. So I CVSUPed the sources and started to perform a 'make buildworld'... thinking that the net might have a more correct distribution. This failed all over the place... mainly because somewhere in the source tree the ../lib/libncurses build had an f-ing typo (../includeosys/.. should have been ../include/sys/..). Mind you, this was from a fresh download of the source tree! After correcting that problem, the make crashed again in another spot... then a third time. Finally, I went back to the servers and installed 4.3-RELEASE ... and it works perfectly. I have never moaned about FreeBSD before... I have never been happier with an operating system. However... I am just wondering if it is just me, or have things gotten just a little sloppy? Peace, Blake To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:16:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id CC5F737B400 for ; Tue, 30 Apr 2002 14:16:53 -0700 (PDT) Received: from dan.emsphone.com (smmsp@localhost [127.0.0.1]) by dan.emsphone.com (8.12.2/8.12.3) with ESMTP id g3ULGq2Z012215; Tue, 30 Apr 2002 16:16:53 -0500 (CDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.2/Submit) id g3ULGnxY012050; Tue, 30 Apr 2002 16:16:49 -0500 (CDT) Date: Tue, 30 Apr 2002 16:16:49 -0500 From: Dan Nelson To: "Christopher J. Umina" Cc: questions@FreeBSD.ORG Subject: Re: Unshared C-Client? Message-ID: <20020430211649.GB45883@dan.emsphone.com> References: <005b01c1f09b$2aca9080$0301a8c0@uminafamily.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <005b01c1f09b$2aca9080$0301a8c0@uminafamily.com> User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (Apr 30), Christopher J. Umina said: > Where can I get an unshared version of C-Client? Right next to the shared version. $ pkg_info -L cclient-2001a,1 | grep lib /usr/local/lib/libc-client4.so.8 /usr/local/lib/libc-client4.a /usr/local/lib/libc-client4.so -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:23: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server10.safepages.com (server10.safepages.com [216.127.146.24]) by hub.freebsd.org (Postfix) with ESMTP id 7BEBB37B400 for ; Tue, 30 Apr 2002 14:23:04 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool56-83.nas40.philadelphia1.pa.us.da.qwest.net [65.129.56.83]) by server10.safepages.com (Postfix) with ESMTP id 134A43C3B4; Tue, 30 Apr 2002 21:23:00 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: Moti Subject: Re: How to enable IP Forwarding Date: Tue, 30 Apr 2002 17:23:04 -0400 X-Mailer: KMail [version 1.4] Cc: freebsd-questions@FreeBSD.org References: <5.1.0.14.2.20020430171011.03881a58@imap.flncs.com> In-Reply-To: <5.1.0.14.2.20020430171011.03881a58@imap.flncs.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204301723.04998.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 17:11, Moti wrote: > At 05:00 PM 4/30/2002 -0400, E. J. Cerejo wrote: > >Which option should I use to enable IP Forwarding in rc.conf? > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > gateway_enable="YES" # Set to YES if this host will be a gateway. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message That is what I have but still my internet sharing doesn't work! I'm trying to share my internet connection with a laptop, I have that in my rc.conf and I start ppp with the -nat switch but I'm still not able to browse on the laptop. Any ideas? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:25:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id C907437B41B for ; Tue, 30 Apr 2002 14:25:15 -0700 (PDT) Received: from [192.168.0.6] (dhcp065-031-025-171.insight.rr.com [65.31.25.171]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id g3ULP3502917; Tue, 30 Apr 2002 17:25:07 -0400 (EDT) Subject: Re: burning software From: Tim Boring To: "Henning, Brian" Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 30 Apr 2002 16:40:59 -0400 Message-Id: <1020199272.4831.3.camel@tim> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 2002-04-30 at 16:20, Henning, Brian wrote: > Hello- > I have a quick question about cd burning. Is there a shell for burncd for > x-windows? I have an ide burner and I could use something simple and easy to > burn cds. Could some one point to the location in the ports dir or maybe to > a package? > Thanks, Hi! For command-line burning, there is cdrecord. If you want a gui, then try xcdroast (which is a gui frontend to cdrecord). If you installed the ports, then in the /usr/ports directory, type "make search key="cdrecord" and it should show you the locations of these apps in the /usr/ports directory. Hope that helps. Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:30:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.mbox.com.au (203-134-146-019.cust.pth.iprimus.net.au [203.134.146.19]) by hub.freebsd.org (Postfix) with ESMTP id BF05637B417 for ; Tue, 30 Apr 2002 14:30:14 -0700 (PDT) Received: from nms2.mbox.com.au (webmail.mbox.com.au [192.168.20.4]) by smtp2.mbox.com.au (Sun Internet Mail Server sims.4.0.2000.05.17.04.13.p6) with ESMTP id <0GVE003KUGTN8F@smtp2.mbox.com.au> for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 05:25:03 +0800 (WST) Received: from mbox.com.au ([127.0.0.1]) by nms2.mbox.com.au (Netscape Messaging Server 4.15) with ESMTP id GVEGW502.HSR for ; Wed, 01 May 2002 05:26:29 +0800 Date: Wed, 01 May 2002 07:26:29 +1000 From: BSD Freak Subject: HDD problems on FreeBSD 4.5-R file server To: FreeBSD Questions Message-id: <3aeebd73aed129.3aed1293aeebd7@mbox.com.au> MIME-version: 1.0 X-Mailer: Netscape Webmail Content-type: text/plain; charset=us-ascii Content-language: en Content-disposition: inline Content-transfer-encoding: 7BIT X-Accept-Language: en Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, I keep getting the following messages on the console of one of our main NFS/SMB file servers when we perform a full backup. Should I be concerned? (ie is the HDD going to die on me anyday now?) Is there anything I can do like "mark" bad blocks or do I need to replace the disk? The messages read as follows: May 1 02:01:19 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:01:19 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:01:27 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 02:01:27 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 02:01:34 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 02:01:34 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 02:01:56 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:01:56 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:02:01 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:01 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:11 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:11 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:23 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:23 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 02:02:33 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:02:33 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 02:02:41 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 02:02:41 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 02:02:47 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 02:02:47 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 03:04:04 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:04:04 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:04:12 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 03:04:12 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 03:04:19 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 03:04:19 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 03:04:49 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:04:49 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:04:56 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:04:56 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:05:06 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:05:06 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:05:15 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:05:15 saturn /kernel: ad4s1e: hard error reading fsbn 60817599 of 30408768-30408783 (ad4s1 bn 60817599; cn 3785 tn 183 sn 45) status=59 error=40 May 1 03:05:25 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:05:25 saturn /kernel: ad4s1e: hard error reading fsbn 86114495 of 43057216-43057231 (ad4s1 bn 86114495; cn 5360 tn 96 sn 47) status=59 error=40 May 1 03:05:32 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 03:05:32 saturn /kernel: ad4s1e: hard error reading fsbn 93847743 of 46923840-46923855 (ad4s1 bn 93847743; cn 5841 tn 191 sn 45) status=59 error=40 May 1 03:05:38 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 May 1 03:05:38 saturn /kernel: ad4s1e: hard error reading fsbn 97386687 of 48693312-48693327 (ad4s1 bn 97386687; cn 6062 tn 10 sn 27) status=59 error=40 --------------------------------------------------------------------- Faxes delivered directly to any email address, new to mBox! Find out more http://www.mbox.com.au/fax To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:38: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lily.ezo.net (lily.ezo.net [206.102.130.13]) by hub.freebsd.org (Postfix) with ESMTP id C5F4237B404 for ; Tue, 30 Apr 2002 14:37:58 -0700 (PDT) Received: from peony.ezo.net (peony.ezo.net [206.102.130.11]) by lily.ezo.net (8.11.6/8.11.6) with ESMTP id g3ULc4Z07244 for ; Tue, 30 Apr 2002 17:38:04 -0400 (EDT) (envelope-from jflowers@ezo.net) From: "Jim Flowers" To: freebsd-questions@freebsd.org Subject: Sendmail 8.12.3 submit.cf problem default & port Date: Tue, 30 Apr 2002 17:38:00 -0400 Message-Id: <20020430173800.M55893@ezo.net> X-Mailer: Open WebMail 1.60 20020130 X-OriginatingIP: 24.93.230.119 (jflowers) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG With both the default 4.5-STABLE and now the -stable port, using /etc/mail/make stable.cf defines the Mlocal mailer as /bin/mail which is nowhere to be found. I think the original install had a submit.cf that correctly referenced /usr/bin/mail. I just edited the Mlocal entry in stable.cf to get it working but what is the correct place to fix this so that future builds are correct? -- Jim Flowers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 14:47:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.delfi.lt (mail.delfi.lt [213.197.128.86]) by hub.freebsd.org (Postfix) with ESMTP id 4F53137B400 for ; Tue, 30 Apr 2002 14:47:55 -0700 (PDT) Received: from dezdemonijus.delfi.lt (dezdemonijus.delfi.lt [213.197.128.98]) by mail.delfi.lt (DELFI Internet mail) with ESMTP id DBFD911330C for ; Tue, 30 Apr 2002 23:47:54 +0200 (EET) Received: by dezdemonijus.delfi.lt (DELFI Portal, from userid 99) id 03BE05E3E; Tue, 30 Apr 2002 23:47:52 +0200 (EET) To: freebsd-questions@FreeBSD.ORG Subject: don't undrestand it From: karolis zilinskas Reply-To: dazikas@xxx.lt CSender-ID: 213.190.39.250/ envelope-from: dazikas@xxx.lt X-Mailer: webmail.delfi.lt X-Priority: 3 Content-type: text/plain; charset=windows-1257 Date: Tue, 30 Apr 2002 23:47:52 +0100 Message-Id: <20020430214752.03BE05E3E@dezdemonijus.delfi.lt> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hello, how are ya? ;-] I would like u to ask a question, or just to ask for help to a problem. When i try to run my Adsl connection thru www.roaringpenguin.com software, i get an answer that 3pids are wrong like "pppd[197]: unrecognizable command 'pty' " , can't understand what he wants for me. I try to write a scrip by my own, all of the necessary modules are in my kernel and i get severl errors as well. I get "default: unrecognizable command" & so on... If you could help me a bit, i'd be very greatefull. Thanx, goodbye <--------------------===========================--------------------> Siusk sms zinute su kodu 163391 i 1322 ir gauk Sirdziu Edikai: Pergale jau cia melodija i savo Nokia Tai kainuos 1.95 Lt. Logotipai ir melodijos: http://sms.delfi.lt/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:12:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id B49AA37B439 for ; Tue, 30 Apr 2002 15:12:27 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g3UM9RE86903; Tue, 30 Apr 2002 19:09:27 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 19:09:26 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: "E. J. Cerejo" Cc: Subject: Re: How to enable IP Forwarding In-Reply-To: <200204301723.04998.ecerejo@zapo.net> Message-ID: <20020430190557.W85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, E. J. Cerejo wrote: > That is what I have but still my internet sharing doesn't work! I'm trying to > share my internet connection with a laptop, I have that in my rc.conf and I > start ppp with the -nat switch but I'm still not able to browse on the > laptop. Any ideas? 1. The default gateway in the laptop may be wrong. 2. Are you using some kind of packet filtering/firewall?. 3. Maybe the NAT is not working. Fer > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:19:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id 87A0437B416 for ; Tue, 30 Apr 2002 15:19:53 -0700 (PDT) Received: from k6-2-300.tisys.org (ppp-136.wobline.de [212.68.69.144]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/sh-2002041503) with ESMTP id g3UMJdI28386; Wed, 1 May 2002 00:19:39 +0200 Received: from tisys.org (palomino-1533.tisys.org [192.168.0.3]) by k6-2-300.tisys.org (8.12.3/8.12.3) with ESMTP id g3UMKto2040864; Wed, 1 May 2002 00:20:55 +0200 (CEST) (envelope-from nils@tisys.org) Received: (from nils@localhost) by tisys.org (8.12.3/8.12.3/Submit) id g3UMJtcA028487; Wed, 1 May 2002 00:19:55 +0200 (CEST) Date: Wed, 1 May 2002 00:19:20 +0200 From: Nils Holland To: BSD Freak Cc: FreeBSD Questions Subject: Re: HDD problems on FreeBSD 4.5-R file server Message-ID: <20020501001920.B28348@daemon.tisys.org> References: <3aeebd73aed129.3aed1293aeebd7@mbox.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <3aeebd73aed129.3aed1293aeebd7@mbox.com.au>; from bsd-freak@mbox.com.au on Wed, May 01, 2002 at 07:26:29AM +1000 X-Operating-System: FreeBSD palomino-1533.tisys.org 4.5-STABLE FreeBSD 4.5-STABLE X-Machine-Uptime: 12:10AM up 14:29, 1 user, load averages: 0.13, 0.74, 0.59 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 07:26:29AM +1000, BSD Freak stood up and spoke: > Hi all, > > I keep getting the following messages on the console of one of our main > NFS/SMB file servers when we perform a full backup. Should I be > concerned? (ie is the HDD going to die on me anyday now?) Is there > anything I can do like "mark" bad blocks or do I need to replace the > disk? The messages read as follows: Sometimes it's a good idea to not instantly expect the worst ;-) For example, did you check the cable this HDD is connected to and probably considered replacing it? If the HDD is attached to a port with another drive present, it might be a good idea if running it all by itself on a cable would be helpful. Lat but not least - the most comprehensive results can always be obtained by using a piece of diagnosis software made specifically by the manufacturer of the drive. Western Digital for example has "WD Diag" for free download on their website. Other vendors should provide other utilities. Only if these utilities also report problems, and if the drive also doesn't work standalone on a cable or even in a different machine, would consider it defective. Otherwise, the problem might be elsewhere, which should much cheaper to fix than replacing the whole drive would be. Greetings Nils -- Nils Holland Ti Systems - http://www.tisys.org Addicted to computing since 1987 High on FreeBSD since 1996 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:23:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id F23DF37B404 for ; Tue, 30 Apr 2002 15:23:53 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g3UML3E86950; Tue, 30 Apr 2002 19:21:04 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 19:21:03 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: karolis zilinskas Cc: Subject: Re: don't undrestand it In-Reply-To: <20020430214752.03BE05E3E@dezdemonijus.delfi.lt> Message-ID: <20020430191342.D85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Please use a better subject line. On Tue, 30 Apr 2002, karolis zilinskas wrote: > > hello, > how are ya? ;-] > I would like u to ask a question, or just to ask for help to a problem. > When i try to run my Adsl connection thru www.roaringpenguin.com > software, i get an answer that 3pids are wrong like "pppd[197]: > unrecognizable command 'pty' " , can't understand what he wants for me. > I try to write a scrip by my own, all of the necessary modules are in > my kernel and i get severl errors as well. I get "default: > unrecognizable command" & so on... If you could help me a bit, i'd be > very greatefull. > Thanx, goodbye > The scripts in that site are for Linux. The way to setup PPPoE in Linux and FreeBSD are different. You need to use userland ppp, not pppd. Search the archives for ways of seting up PPPoE in FreeBSD. Fer > > <--------------------===========================--------------------> > Siusk sms zinute su kodu 163391 i 1322 > ir gauk Sirdziu Edikai: Pergale jau cia melodija i savo Nokia > Tai kainuos 1.95 Lt. Logotipai ir melodijos: http://sms.delfi.lt/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:32: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server1.safepages.com (server1.safepages.com [216.127.146.3]) by hub.freebsd.org (Postfix) with ESMTP id 038C137B404 for ; Tue, 30 Apr 2002 15:31:59 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool56-83.nas40.philadelphia1.pa.us.da.qwest.net [65.129.56.83]) by server1.safepages.com (Postfix) with ESMTP id 25A535E1B; Tue, 30 Apr 2002 22:31:50 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: Fernando Gleiser Subject: Re: How to enable IP Forwarding Date: Tue, 30 Apr 2002 18:31:55 -0400 X-Mailer: KMail [version 1.4] Cc: References: <20020430190557.W85537-100000@localhost> In-Reply-To: <20020430190557.W85537-100000@localhost> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204301831.55134.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 18:09, Fernando Gleiser wrote: > On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > > That is what I have but still my internet sharing doesn't work! I'm trying to > > share my internet connection with a laptop, I have that in my rc.conf and I > > start ppp with the -nat switch but I'm still not able to browse on the > > laptop. Any ideas? > > 1. The default gateway in the laptop may be wrong. What should the default gateway in the laptop be set to? It might the problem because right now I've got no default gateways set in the laptop! > 2. Are you using some kind of packet filtering/firewall?. NO > 3. Maybe the NAT is not working. According to the ppp man page it should be working: ...If network applications work correctly on the ppp host, but not on other machines in the LAN, then the masquerading software is working properly, but the host is ei­ ther not forwarding or possibly receiving IP packets. Check that IP for­ warding is enabled in /etc/rc.conf and that other machines have designat­ ed the ppp host as the gateway for the LAN. > > > Fer > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:32:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.m3-d.com (mail.m3-d.com [66.136.220.62]) by hub.freebsd.org (Postfix) with ESMTP id 29B6437B416 for ; Tue, 30 Apr 2002 15:32:31 -0700 (PDT) Received: from [66.136.220.61] (helo=flexlm) by mail.m3-d.com with smtp (Exim 3.33 #1) id 172gp1-00080m-00 for freebsd-questions@FreeBSD.ORG; Tue, 30 Apr 2002 18:14:11 -0500 From: "Robert Sparks" To: Subject: Directory Server for Netmeeting? Date: Tue, 30 Apr 2002 17:31:47 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there a package for installing an ldap FreeBSD directory server that could be used as the corporate Netmeeting server? The intent is to allow users in the corp to quickly communicate with Netmeeting. Thanks, Robert Sparks Network Administrator rsparks@m3designinc.com (512) 218-8858 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:37:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hose.mail.pipex.net (hose.mail.pipex.net [158.43.128.58]) by hub.freebsd.org (Postfix) with SMTP id 40E0437B404 for ; Tue, 30 Apr 2002 15:37:39 -0700 (PDT) Received: (qmail 1987 invoked from network); 30 Apr 2002 22:35:29 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-4.dial.pipex.com with SMTP; 30 Apr 2002 22:35:29 -0000 Subject: Printing to HP 820 Cxi from FreeBSD 4.5 Stable From: "S. Roberts" Reply-To: sroberts@dsl.pipex.com To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 30 Apr 2002 23:31:36 +0100 Message-Id: <1020205897.344.30.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I'm having problems printing to an HP DeskJet 820 Cxi (parallel) printer connected to one of my machines. I've tried the Handbook setup for using lp, lpr and installed apsfilter-7.2.2 as well after my earlier attempts fail. The thing is, my printer does *not* appear in any of the lists of drivers when running apsfilter setup as per the pkg-message. So I know that this was not a good start. But I would have thought that the comments in the Handbook, Unleashed as well as The Complete FreeBSD about how simple this should be, would somehow mitigate against this. However, no matter which driver I try, I keep getting no results. lptest returns no output as expected, but everything else fails: ps waux | grep lp root 464 0.0 0.2 948 672 ?? I 8:18PM 0:00.01 gnome-pty-helper root 70608 0.0 0.2 964 704 ?? Is 11:26PM 0:00.02 lpd root 70609 0.0 0.2 964 704 ?? S 11:26PM 0:00.00 lpd lptest > /dev/lpt0 /dev/lpt0: Device not configured. lpq waiting for lp to become ready (offline?) Rank Owner Job Files Total Size 1st root 8 (standard input) 105 bytes 2nd root 9 (standard input) 105 bytes Is anyone out there actually running one of these printers? Can you assist, please? Thanks to all those that might reply. Stacey Demon# ls -l /dev/lpt? crw------- 1 root wheel 16, 0 Apr 27 12:27 /dev/lpt0 crw------- 1 root wheel 16, 1 Apr 27 12:27 /dev/lpt1 crw------- 1 root wheel 16, 2 Apr 27 12:27 /dev/lpt2 Demon# -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 15:45:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f211.sea1.hotmail.com [207.68.163.211]) by hub.freebsd.org (Postfix) with ESMTP id 8D3EC37B448 for ; Tue, 30 Apr 2002 15:44:32 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 Apr 2002 15:44:32 -0700 Received: from 156.153.255.236 by sea1fd.sea1.hotmail.msn.com with HTTP; Tue, 30 Apr 2002 22:44:32 GMT X-Originating-IP: [156.153.255.236] From: "Carolyn Longfoot" To: wmoran@potentialtech.com Cc: freebsd-questions@freebsd.org Subject: Re: NAT/DNS/WEB Date: Tue, 30 Apr 2002 18:44:32 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 30 Apr 2002 22:44:32.0389 (UTC) FILETIME=[984BE350:01C1F098] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Bill, thanks, I'm not quite there yet but at least in my mind I am beginning to narrow the problem down somewhat. I have inserted the tests from the outside and hope the revised questions reflect the problem statement better :-) Cheers, Caro >From: Bill Moran >To: Carolyn Longfoot >CC: freebsd-questions@freebsd.org >Subject: Re: NAT/DNS/WEB >Date: Tue, 30 Apr 2002 17:13:52 -0400 > >Carolyn Longfoot wrote: >>I have a machine that's a dual homed host running NAT and DNS, connected >>to the outside world with a static IP. It seems I can nslookup >>'www.mydomain.com' from the outside, so I think my DNS responds to >>lookups from the outside. > >If nslookup from a machine on the internet resolves the name to the proper >address, then your DNS is correct. A simple "ping www.mydomain.com" will >tell you whether or not the DNS resolved. If you then can't contact that >machine, well, it's not DNS that's the problem. The ping works, and I hope it's ok that ping www.mydomain.com returns this: Pinging mydomain.com [x.x.x.7] with 32 bytes of data: ... where .7 is the IP of the dual homed host, which I would expect becasue NAT should make sure to only communciate with the outside world using the external IP. >>I am pointing 'WWW' via DNS to a separate machine called >>web.mydomain.com but for some reason from the outside I cannot get to >>www.mydomain.com. It is working from the inside however. > >What's the IP address of the www machine? If it's a private IP addy, >you'll get this behaviour. Yes, the www box has a private IP. I was counting on the magic of NAT and DNS to resolve this, my naive reasoning was this: since I allow inbound DNS and have set up an alias for www.mydomain.com in DNS I was thinking that would be sufficient to direct traffic to the www box. >>My confusion is therefore the following: how can I test that outside DNS >>queries are resolved correctly and why would requests for www... not get >>routed to the Web server? > >Use nslookup, if it gives you the right number but you can't contact it, >then the DNS is correct but something else is wrong. nslookup www.mydomain.com gives this (from the outside): Server:... Address:... Non-authoritative answer: Name: mydomain.com Address: x.x.x.7 Aliases: www.mydomain.com It seems DNS is doing at least part of it's job and finds the alias www, while NAT returns the external IP, not the internal one. >>I'm pretty sure nothing relevant (UDP 53 or IP 80) gets dropped by the >>firewall btw. > >But is the routing information correct? Not sure if I understand the question but it could point to the root of the problem that no traffic actually goes to the www box. I must be missing some switch to make that work... >>This is my first attempt at DNS so please be gentle :-) I'm looking for >>a conceptual answer but I can follow up with config files if it helps. I >>read some old posts at 'Ask Mr.DNS' that talked about running 'split >>DNS'. Is that still necessary? > >Depends. The machine that's running the web server, is it actually >accessible from the Internet? If not, you'll either need another IP >address or to alias via NAT. >If you alias, you'll make your DNS entry for www point to the machine that >has the static IP, then you'll configure that machine to pass the request >through to the real webserver. Based on ping and nslookup it looks like it's found but not really, because nothing goes through to the www box. It's getting a little clearer now but where would I configure the 'pass http traffic to www' directive? NAT, DNS? --- >Bill Moran >Potential Technology >http://www.potentialtech.com > _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 16: 9:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 81A8437B41D for ; Tue, 30 Apr 2002 16:09:36 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g3UN6hE87110; Tue, 30 Apr 2002 20:06:43 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 20:06:43 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: "E. J. Cerejo" Cc: Subject: Re: How to enable IP Forwarding In-Reply-To: <200204301831.55134.ecerejo@zapo.net> Message-ID: <20020430200138.E85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > 1. The default gateway in the laptop may be wrong. > > What should the default gateway in the laptop be set to? It might the > problem because right now I've got no default gateways set in the laptop! That is the problem. The laptop can't reach the Internet because it doesn't know whom to send the packets to. It needs a default gateway. Set it to the internal IP address of the BSD box. That is, the IP of the Ethernet interface, not the tun one. Fer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 16:38:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 7BB4837B419 for ; Tue, 30 Apr 2002 16:38:43 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g3UNciU05374; Tue, 30 Apr 2002 19:38:44 -0400 Message-ID: <3CCF2C3A.7040902@potentialtech.com> Date: Tue, 30 Apr 2002 19:43:54 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Carolyn Longfoot Cc: freebsd-questions@freebsd.org Subject: Re: NAT/DNS/WEB References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Carolyn Longfoot wrote: > Bill, > > thanks, I'm not quite there yet but at least in my mind I am beginning > to narrow the problem down somewhat. I have inserted the tests from the > outside and hope the revised questions reflect the problem statement > better :-) You're on the right road, you just haven't walked far enough yet. >> From: Bill Moran >> To: Carolyn Longfoot >> CC: freebsd-questions@freebsd.org >> Subject: Re: NAT/DNS/WEB >> Date: Tue, 30 Apr 2002 17:13:52 -0400 >> >> Carolyn Longfoot wrote: >> >>> I have a machine that's a dual homed host running NAT and DNS, connected >>> to the outside world with a static IP. It seems I can nslookup >>> 'www.mydomain.com' from the outside, so I think my DNS responds to >>> lookups from the outside. >> >> >> If nslookup from a machine on the internet resolves the name to the >> proper >> address, then your DNS is correct. A simple "ping www.mydomain.com" will >> tell you whether or not the DNS resolved. If you then can't contact that >> machine, well, it's not DNS that's the problem. > > > The ping works, and I hope it's ok that ping www.mydomain.com returns this: > Pinging mydomain.com [x.x.x.7] with 32 bytes of data: > ... > where .7 is the IP of the dual homed host, which I would expect becasue > NAT should make sure to only communciate with the outside world using > the external IP. Pretty much. Forget DNS, routing, etc, at this point - they're all working correctly. Well done. >>> I am pointing 'WWW' via DNS to a separate machine called >>> web.mydomain.com but for some reason from the outside I cannot get to >>> www.mydomain.com. It is working from the inside however. > >> What's the IP address of the www machine? If it's a private IP addy, >> you'll get this behaviour. > > Yes, the www box has a private IP. I was counting on the magic of NAT > and DNS to resolve this, my naive reasoning was this: since I allow > inbound DNS and have set up an alias for www.mydomain.com in DNS I was > thinking that would be sufficient to direct traffic to the www box. Not quite. NAT is capable of doing what you want, it's just not capable of doing it automatically. Read through the man page for natd and pay special attention to the -redirect_port option. What you want to do is redirect port 80 on the gateway machine to port 80 on your webserver. That will instruct natd on how to direct traffic. > nslookup www.mydomain.com gives this (from the outside): > Server:... > Address:... > Non-authoritative answer: > Name: mydomain.com > Address: x.x.x.7 > Aliases: www.mydomain.com > > It seems DNS is doing at least part of it's job and finds the alias www, > while NAT returns the external IP, not the internal one. That's what you want, once you've setup natd, everything should work (assuming your web server is set up, etc) > Based on ping and nslookup it looks like it's found but not really, > because nothing goes through to the www box. > It's getting a little clearer now but where would I configure the 'pass > http traffic to www' directive? NAT, DNS? The natd option -redirect_port -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 16:48:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server5.safepages.com (server5.safepages.com [216.127.146.2]) by hub.freebsd.org (Postfix) with ESMTP id 246A137B417 for ; Tue, 30 Apr 2002 16:48:14 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool56-83.nas40.philadelphia1.pa.us.da.qwest.net [65.129.56.83]) by server5.safepages.com (Postfix) with ESMTP id 4C28F2ABFA; Tue, 30 Apr 2002 23:48:01 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: Fernando Gleiser Subject: Re: How to enable IP Forwarding Date: Tue, 30 Apr 2002 19:48:10 -0400 X-Mailer: KMail [version 1.4] Cc: References: <20020430200138.E85537-100000@localhost> In-Reply-To: <20020430200138.E85537-100000@localhost> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200204301948.10710.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 19:06, Fernando Gleiser wrote: > On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > > > 1. The default gateway in the laptop may be wrong. > > > > What should the default gateway in the laptop be set to? It might the > > problem because right now I've got no default gateways set in the laptop! > > > That is the problem. The laptop can't reach the Internet because it doesn't > know whom to send the packets to. It needs a default gateway. > > Set it to the internal IP address of the BSD box. That is, the IP of the > Ethernet interface, not the tun one. What command will give me that information? I've tried 'ifconfig -a' but I don't see any IP set to fpx0. Thanks > > > Fer > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 16:52:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spork.pantherdragon.org (spork.pantherdragon.org [206.29.168.146]) by hub.freebsd.org (Postfix) with ESMTP id 8E17F37B419 for ; Tue, 30 Apr 2002 16:52:07 -0700 (PDT) Received: from spark.techno.pagans (spark.techno.pagans [4.61.202.145]) by spork.pantherdragon.org (Postfix) with ESMTP id 50C27471DA for ; Tue, 30 Apr 2002 16:52:02 -0700 (PDT) Received: from pantherdragon.org (speck.techno.pagans [172.21.42.2]) by spark.techno.pagans (Postfix) with ESMTP id 7E14526C17 for ; Tue, 30 Apr 2002 16:51:59 -0700 (PDT) Message-ID: <3CCF2E1F.EEF74273@pantherdragon.org> Date: Tue, 30 Apr 2002 16:51:59 -0700 From: Darren Pilgrim X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: make install wrapper? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Is there a way to, or does anyone know of a (collection of) script(s) that can take the makefile for a source package and build a second script around it that backs up any files that will be overwritten before installing the compiled package, create an uninstall script if one isn't present, and handles restoration of the old files after an uninstall? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 16:52:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blacklamb.mykitchentable.net (ekgr-dsl2-92.citlink.net [207.173.226.92]) by hub.freebsd.org (Postfix) with ESMTP id DAC5B37B417 for ; Tue, 30 Apr 2002 16:52:08 -0700 (PDT) Received: from tagalong (unknown [165.107.42.110]) by blacklamb.mykitchentable.net (Postfix) with SMTP id 6791FEE5A1; Tue, 30 Apr 2002 16:52:02 -0700 (PDT) Message-ID: <03d001c1f0a2$06640170$6e2a6ba5@lc.ca.gov> From: "Drew Tomlinson" To: , "Fernando Gleiser" Cc: References: <20020430200138.E85537-100000@localhost> <200204301948.10710.ecerejo@zapo.net> Subject: Re: How to enable IP Forwarding Date: Tue, 30 Apr 2002 16:52:02 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "E. J. Cerejo" To: "Fernando Gleiser" Cc: Sent: Tuesday, April 30, 2002 4:48 PM Subject: Re: How to enable IP Forwarding > On Tuesday 30 April 2002 19:06, Fernando Gleiser wrote: > > On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > > > > > 1. The default gateway in the laptop may be wrong. > > > > > > What should the default gateway in the laptop be set to? It might the > > > problem because right now I've got no default gateways set in the laptop! > > > > > > That is the problem. The laptop can't reach the Internet because it doesn't > > know whom to send the packets to. It needs a default gateway. > > > > Set it to the internal IP address of the BSD box. That is, the IP of the > > Ethernet interface, not the tun one. > > What command will give me that information? I've tried 'ifconfig -a' but I > don't see any IP set to fpx0. man route ... can't remember off the top of my head. Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 17: 0: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id C558137B419 for ; Tue, 30 Apr 2002 16:59:57 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172hXI-0006If-00 for questions@freebsd.org; Tue, 30 Apr 2002 16:59:56 -0700 Message-ID: <009901c1f0bc$69460940$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: PHP4 & Apache_1.3.24 Date: Tue, 30 Apr 2002 20:00:54 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Okay, this is pissing me off.. When I build PHP4 with the IMAP enabled and pointed at /usr/local so it picks up c-client I get this error. ---------------------------------------------------------------------------- ---------------------------------------- my helpers/dummy.c -R/usr/local/lib -rdynamic -L/usr/local/lib -Lmodules/php 4 -L../modules/php4 -L../../modules/php4 -lmodphp4 -lpam -lc-client4 -lmm - lcry pt -lpam -lcrypt -lm -lcrypt -lcrypt -lssl -lcrypto /usr/local/lib/libc-client4.so: undefined reference to `mm_expunged' /usr/local/lib/libc-client4.so: undefined reference to `mm_diskerror' /usr/local/lib/libc-client4.so: undefined reference to `mm_lsub' /usr/local/lib/libc-client4.so: undefined reference to `mm_flags' /usr/local/lib/libc-client4.so: undefined reference to `mm_fatal' /usr/local/lib/libc-client4.so: undefined reference to `mm_nocritical' /usr/local/lib/libc-client4.so: undefined reference to `mm_notify' /usr/local/lib/libc-client4.so: undefined reference to `mm_searched' /usr/local/lib/libc-client4.so: undefined reference to `mm_status' /usr/local/lib/libc-client4.so: undefined reference to `mm_login' /usr/local/lib/libc-client4.so: undefined reference to `mm_list' /usr/local/lib/libc-client4.so: undefined reference to `mm_critical' /usr/local/lib/libc-client4.so: undefined reference to `mm_exists' /usr/local/lib/libc-client4.so: undefined reference to `mm_log' /usr/local/lib/libc-client4.so: undefined reference to `mm_dlog' *** Error code 1 Stop in /root/Webserver/apache_1.3.24/src/helpers. ============= End of Error Report ============= Aborting! ---------------------------------------------------------------------------- ---------------------------------------- Has anybody had this problem? I can't figure it out at all.. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 17: 7:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.mgfairfax.rr.com (fe4.southeast.rr.com [24.93.67.51]) by hub.freebsd.org (Postfix) with ESMTP id 62A5F37B417 for ; Tue, 30 Apr 2002 17:07:27 -0700 (PDT) Received: from cox.rr.com ([24.163.115.240]) by mail4.mgfairfax.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Tue, 30 Apr 2002 20:07:21 -0400 Message-ID: <3CCF31BA.9060504@cox.rr.com> Date: Tue, 30 Apr 2002 20:07:22 -0400 From: Ray Kohler User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020423 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Which list to look for software testers? Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Subject says it all. I want to find testers for what will soon (hopefully) be a new port. Thanks, Ray To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 17:25:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from glow.binity.net (glow.binity.net [213.84.201.224]) by hub.freebsd.org (Postfix) with ESMTP id 7D39737B404 for ; Tue, 30 Apr 2002 17:25:40 -0700 (PDT) Received: from vscan (glow.dt1.binity.net [172.23.18.1]) by glow.binity.net (Postfix) with ESMTP id BF7E255D5; Wed, 1 May 2002 02:25:43 +0200 (CEST) Received: from silver.dt1.binity.net (silver.dt1.binity.net [172.23.3.20]) by glow.binity.net (Postfix) with ESMTP id E182A54C9; Wed, 1 May 2002 02:25:41 +0200 (CEST) Date: Wed, 1 May 2002 02:25:46 +0200 From: Walter Hop X-Mailer: The Bat! (v1.53d) Educational X-Priority: 3 (Normal) Message-ID: <4118357606.20020501022546@binity.com> To: Blake Swensen Cc: FreeBSD List Subject: Re: 4.5-RELEASE oddities (read:flamebait) In-Reply-To: <3CCF0A42.F52C96E2@pyramus.com> References: <3CCF0A42.F52C96E2@pyramus.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: by glow.binity.net (amavis-perl-11-sky2) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [in reply to blake@pyramus.com, 30-04-2002] > I have never moaned about FreeBSD before... I have never been happier > with an operating system. However... I am just wondering if it is just > me, or have things gotten just a little sloppy? I have wondered the same thing after reading all the security advisories concerning the 4.5-RELEASE networking code, an area of the BSDs that is otherwise well-known for its great track record... I used to depend on -RELEASEs for production machines and only tracked -STABLE when it was necessary, but right now I'm happy that my upgrade plan for this month already was to bring all machines to -STABLE. Maybe the FreeBSD developer community has been under pressure a bit too much as a result of the big changes in the last year, who knows... I'll stick around for 5.0 anyway. Hopefully my C will be on par to help out a bit. :) -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 17:30:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ideal.net.au (ion.ideal.net.au [203.20.241.5]) by hub.freebsd.org (Postfix) with ESMTP id 4FB9037B416 for ; Tue, 30 Apr 2002 17:30:17 -0700 (PDT) Received: from carbon.ideal.net.au (carbon.staff.ideal.net.au [202.3.35.6]) by mail.ideal.net.au (8.9.3/8.9.3) with ESMTP id KAA05757; Wed, 1 May 2002 10:29:53 +1000 (EST) (envelope-from peter@ideal.net.au) Message-Id: <5.1.0.14.2.20020501102837.03332e38@mail.ideal.net.au> X-Sender: peter@mail.ideal.net.au X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 01 May 2002 10:29:59 +1000 To: Ray Kohler From: Peter MacGee Subject: Re: Which list to look for software testers? Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <3CCF31BA.9060504@cox.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Ray, At 08:07 PM 30/04/2002 -0400, you wrote: >Subject says it all. I want to find testers for what will soon (hopefully) >be a new port. What sort of port? Cheers, Pete. -- Computers are just like air conditioners; They don't work properly if you open Windows. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 17:38:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id CDF8B37B419 for ; Tue, 30 Apr 2002 17:38:14 -0700 (PDT) Received: (qmail 4903 invoked by uid 0); 1 May 2002 00:38:13 -0000 Received: from tk212017108240.univie.teleweb.at (HELO Deadcell.ant) (212.17.108.240) by mail.gmx.net (mp014-rz3) with SMTP; 1 May 2002 00:38:13 -0000 Received: (from ant@localhost) by Deadcell.ant (8.11.6/8.11.6) id g410cCI37841 for freebsd-questions@freebsd.org; Wed, 1 May 2002 02:38:12 +0200 (CEST) (envelope-from ant) Date: Wed, 1 May 2002 02:38:12 +0200 From: Andreas Ntaflos To: freebsd-questions@freebsd.org Subject: OK, what the fsck is this? X installation... Message-ID: <20020501023812.A37800@Deadcell.ant> Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello list, I've been trying to upgrade XFree86 4.1 to 4.2 this afternoon. Things went really out of hand at some point. I don't know ex- actly what happened (portupgrade, portinstall, build errors, pkgdb -F, etc etc etc) but X got deinstalled. Whatever. I'm up to doing a clean reinstall, and when building the whole thing with portinstall XFree86 What surprised me was that there was no script anymore, asking if I'd like to install xdm, some fonts or whatever else. No idea about that. But what really confuses me is the following error I get when building the thing: ===> Configuring for XFree86-font100dpi-4.2.0 (cd /usr/ports/x11-fonts/XFree86-4-font100dpi/work/xc/fonts/encodings && imake -DUseInstalled -DPro jectRoot=/usr/X11R6 -I/usr/X11R6/lib/X11/config -DTOPDIR=../../.. -DCURDIR=.; make Makefiles ; ma ke includes ; make depend) making Makefiles in large... including in ./large... depending in ./large... (cd /usr/ports/x11-fonts/XFree86-4-font100dpi/work/xc/fonts/bdf/100dpi && imake -DUseInstalled -DPr ojectRoot=/usr/X11R6 -I/usr/X11R6/lib/X11/config -DTOPDIR=../../.. -DCURDIR=.; make Makefiles ; m ake includes ; make depend) make: don't know how to make /usr/X11R6/bin/ucs2any.pl. Stop *** Error code 2 Really bad formatting, sorry. Hope it is still somehow readable. What the hell is this ucs2any thing? What has it got to do with anything? I can do whatever I want, this does not go away. Perhaps it has something to do with the following error I got before the whole thing got out of control: /usr/bin/install -c -m 0755 xon.sh /usr/X11R6/bin/xon install in programs/scripts done installing in programs/glxinfo... rm -f glxinfo LD_LIBRARY_PATH=../../exports/lib cc -o glxinfo -ansi -pedantic -Dasm=__asm -Wall -Wpointer-arith -L../../exports/lib glxinfo.o -lGLU -lGL -lXext -lX11 -L/usr/X11R6/lib -pthread -lm -Wl,-rpath, /usr/X11R6/lib /usr/libexec/elf/ld: cannot find -lGLU *** Error code 1 Stop in /usr/ports/x11/XFree86-4-clients/work/xc/programs/glxinfo. *** Error code 1 I am completely out of ideas, no clue what this is about. Never seen it before. I am there now with a messed up dependency database, no X whatsoever and really frustrated. portupgrade is great, but somehow I managed to screw up big time. Even vim is gone, giving me an error like "/usr/libexec/ld-elf.so.1: Shared object "libgtk12.so.2" not found". Anyone got any ideas? I am sorry for the length of this post, I am sorry for my English, and for the little information I can give. I am running 4.5-STABLE from March 13 by the way. Hope someone even read this. Any help is _really_ appreciated. TIA regards -- Andreas "ant" Ntaflos ntaflos.andreas@gmx.net Vienna, AUSTRIA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18: 1: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.vividnet.com (mail.vividnet.com [206.149.144.3]) by hub.freebsd.org (Postfix) with ESMTP id 2402637B404 for ; Tue, 30 Apr 2002 18:00:56 -0700 (PDT) Received: from vividnet.com (guardian.vividnet.com [206.149.144.166]) by mail.vividnet.com (8.8.8/8.8.8) with ESMTP id SAA04430 for ; Tue, 30 Apr 2002 18:00:55 -0700 (PDT) (envelope-from robinche@vividnet.com) Message-ID: <3CCF3E13.637C110F@vividnet.com> Date: Tue, 30 Apr 2002 18:00:03 -0700 From: Robin Chen X-Mailer: Mozilla 4.78 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: NAT using real ip References: <20020501023812.A37800@Deadcell.ant> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have 2 providers giving me static ip access to the internet. Generally I want to use provider A for all traffic because I have several ip addresses to use, but I want to utilize provider B for all http traffic. Can I utilize natd for this? Currently I have a FreeBSD router as the main gateway to the internet using provider A. I've also installed a nat server connected to provider B. The nat server has 2 interfaces, fxp0 using ip address from provider A and rl0 using ip address from provider B. The default route for nat server is using provider B. On the main gateway, I'm using: ipfw add fwd nat.server.machine tcp from provider.a.ip to any 80 I've set up the nat server running natd -interface rl0 with following: ipfw add divert natd tcp from any to any 80 via rl0 ipfw add allow ip from any to any The result of the verbose output is: Out [TCP] [TCP] client.provider.a.ip:4094 -> outside.web.site:80 aliased to [TCP] provider.b.ip:4094 -> outside.web.site:80 but the client using provider a's ip cannot pull up any websites. What do I need to change? Thanks, Robin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:19:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from goose.prod.itd.earthlink.net (goose.mail.pas.earthlink.net [207.217.120.18]) by hub.freebsd.org (Postfix) with ESMTP id 952E637B41A for ; Tue, 30 Apr 2002 18:19:48 -0700 (PDT) Received: from user-119a7q7.biz.mindspring.com ([66.149.31.71] helo=athlon.wsonline.net) by goose.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 172ils-0003tB-00; Tue, 30 Apr 2002 18:19:04 -0700 Message-Id: <5.1.0.14.0.20020430184627.0264e908@pop.wsonline.net> X-Sender: richardh@pop.wsonline.net X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 30 Apr 2002 19:22:58 -0600 To: Jud , bc3910@yahoo.com From: RichardH Subject: Re: Re: Boot Manager Conversion Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <1020198724.58c92ffcjud@myrealbox.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I had it tri booting off one HDD and then I set it up so I was booting Win98/Slack off Pri master, cd-rom pri slave, Slack second master so it is possible. As I said I do not remember the exact lilo entries, I do remember it took me almost 2 weeks to get it to boot all 3. Don't set up any boot record for the FBSD drive and then tell lilo to look in that drive for the kernel image (again I don't remember if I set up a boot partition/ boot sector on the BSD disk), I just know for a fact it can be done. I do not have any systems set up now that will run win98 so cannot set it up again and tell you how to do it, your just going to have to play with it unless someone here is tri-booting and just hasn't seen the thread yet. If you can tell me how to get win98 to recognize 1.5 GB of RAM on a system I may be able to set up a system and do it again sometime within the next few weeks. Here are some links to tri-boot info, they should help you get it going, might take a weekend of frustration but it's pretty cool once it runs right. Just remember MS has to be "first" as is their pattern in everything :-) http://www.samag.com/documents/s=1323/sam0110b/0110b.htm http://linux.geodsoft.com/howto/dualboot/manyboot.htm#triple http://pub53.ezboard.com/buhelpcanhelpforum (you need to join but they have a lot of people who do this). Also join the list linux-help@aclug.org list or read through the archives at http://arch.freeciv.org/ (linux-help archive). I believe it tells you somewhere in there how to do it. You can probably just join the list, someone has a page somewhere stepping it out exactly I just cannot locate the link anymore. Richard H At 02:32 PM 4/30/2002, Jud wrote: >-----Original Message----- >From: Bryan Curl >To: RichardH , freebsd-questions > >Date: Tue, 30 Apr 2002 09:23:33 -0700 (PDT) >Subject: Re: Boot Manager Conversion > > > That's exactly what I was attempting to do. All three OS's are on > seperate drives. My win98 drive has an MBR. My mandrake boots from a > floppy using Lilo. My FreeBSD drive has an MBR so I currently have to > swap the win98 with the BSD drive as required. >I tried to simply put an entry in Lilo for the BSD drive but have not had >good success defining the "boot=" variable. Perhaps >there is a table entry somewhere on the floppy and the set up needs to be >similar to the win98 entry, I don't know. >My goal is to have Primary Master=Win98(w/MBR), Primary Slave=Mandrake, >Secondary Master=Toshiba CD-RW/DVD, Secondary Slave=FreeBSD. >[snip] > >_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ > >Would grub from the FreeBSD ports (/usr/ports/sysutils/grub) serve your >purpose? Don't know if you're familiar with it from the Linux world and >don't care for it, but if that's not the situation, you may want to do >some reading and see if it will work for you. > >Jud > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:30:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f23.sea1.hotmail.com [207.68.163.23]) by hub.freebsd.org (Postfix) with ESMTP id 11C3137B41A for ; Tue, 30 Apr 2002 18:30:27 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 Apr 2002 18:30:26 -0700 Received: from 65.184.7.97 by sea1fd.sea1.hotmail.msn.com with HTTP; Wed, 01 May 2002 01:30:26 GMT X-Originating-IP: [65.184.7.97] From: "Carolyn Longfoot" To: wmoran@potentialtech.com Cc: freebsd-questions@freebsd.org Subject: Re: NAT/DNS/WEB Date: Tue, 30 Apr 2002 21:30:26 -0400 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 01 May 2002 01:30:26.0961 (UTC) FILETIME=[C5AF0810:01C1F0AF] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG WEEEEEEEE!! I can see the page from the outside after adding redirect_port tcp 10.0.0.3:80 80 to natd.conf I'm sure I can figure out why I cannot get to the page from the inside anymore, that it works from the outside is the breakthrough that counts. Thanks Bill!!! Caro >From: Bill Moran >To: Carolyn Longfoot >CC: freebsd-questions@freebsd.org >Subject: Re: NAT/DNS/WEB >Date: Tue, 30 Apr 2002 19:43:54 -0400 > >Carolyn Longfoot wrote: >>Bill, >> >>thanks, I'm not quite there yet but at least in my mind I am beginning >>to narrow the problem down somewhat. I have inserted the tests from the >>outside and hope the revised questions reflect the problem statement >>better :-) > >You're on the right road, you just haven't walked far enough yet. > >>>From: Bill Moran >>>To: Carolyn Longfoot >>>CC: freebsd-questions@freebsd.org >>>Subject: Re: NAT/DNS/WEB >>>Date: Tue, 30 Apr 2002 17:13:52 -0400 >>> >>>Carolyn Longfoot wrote: >>> >>>>I have a machine that's a dual homed host running NAT and DNS, connected >>>>to the outside world with a static IP. It seems I can nslookup >>>>'www.mydomain.com' from the outside, so I think my DNS responds to >>>>lookups from the outside. >>> >>> >>>If nslookup from a machine on the internet resolves the name to the >>>proper >>>address, then your DNS is correct. A simple "ping www.mydomain.com" will >>>tell you whether or not the DNS resolved. If you then can't contact that >>>machine, well, it's not DNS that's the problem. >> >> >>The ping works, and I hope it's ok that ping www.mydomain.com returns >>this: >>Pinging mydomain.com [x.x.x.7] with 32 bytes of data: >>... >>where .7 is the IP of the dual homed host, which I would expect becasue >>NAT should make sure to only communciate with the outside world using >>the external IP. > >Pretty much. Forget DNS, routing, etc, at this point - they're all working >correctly. Well done. > >>>>I am pointing 'WWW' via DNS to a separate machine called >>>>web.mydomain.com but for some reason from the outside I cannot get to >>>>www.mydomain.com. It is working from the inside however. >> >>>What's the IP address of the www machine? If it's a private IP addy, >>>you'll get this behaviour. >> >>Yes, the www box has a private IP. I was counting on the magic of NAT >>and DNS to resolve this, my naive reasoning was this: since I allow >>inbound DNS and have set up an alias for www.mydomain.com in DNS I was >>thinking that would be sufficient to direct traffic to the www box. > >Not quite. NAT is capable of doing what you want, it's just not capable >of doing it automatically. >Read through the man page for natd and pay special attention to the >-redirect_port option. What you want to do is redirect port 80 on the >gateway machine to port 80 on your webserver. That will instruct natd >on how to direct traffic. > >>nslookup www.mydomain.com gives this (from the outside): >>Server:... >>Address:... >>Non-authoritative answer: >>Name: mydomain.com >>Address: x.x.x.7 >>Aliases: www.mydomain.com >> >>It seems DNS is doing at least part of it's job and finds the alias www, >>while NAT returns the external IP, not the internal one. > >That's what you want, once you've setup natd, everything should work >(assuming >your web server is set up, etc) > >>Based on ping and nslookup it looks like it's found but not really, >>because nothing goes through to the www box. >>It's getting a little clearer now but where would I configure the 'pass >>http traffic to www' directive? NAT, DNS? > > >The natd option -redirect_port > > >-- >Bill Moran >Potential Technology >http://www.potentialtech.com > _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:33:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from squid.tznet.com (squid.tznet.com [66.170.64.7]) by hub.freebsd.org (Postfix) with ESMTP id 2890737B405 for ; Tue, 30 Apr 2002 18:33:47 -0700 (PDT) Received: from mail.tznet.com (mail.tznet.com [66.170.64.2]) by squid.tznet.com (8.11.2/8.11.2) with ESMTP id g411Xef56575 for ; Tue, 30 Apr 2002 20:33:40 -0500 (CDT) Date: Tue, 30 Apr 2002 20:33:40 -0500 (CDT) From: Scott Pilz To: freebsd-questions@freebsd.org Subject: Security Message-ID: <20020430203245.C27751-100000@mail.tznet.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Looking to tie down BSD to the point of no return. Any way to disable single-user mode? Anyway to prevent a key-stroke from removing the boot splash screen? Thanks, Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:37:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from Thanatos.Shenton.Org (a3.ebbed1.client.atlantech.net [209.190.235.163]) by hub.freebsd.org (Postfix) with SMTP id 2AA7437B416 for ; Tue, 30 Apr 2002 18:37:07 -0700 (PDT) Received: (qmail 21713 invoked by uid 1000); 1 May 2002 01:37:05 -0000 To: Axel Scheepers Cc: freebsd-questions Subject: Re: mount /dev/acd0c: Device not configured References: <87vgah2m61.fsf@thanatos.shenton.org> <20020425225618.I24392@mars.thuis> <87vgaf5umh.fsf@thanatos.shenton.org> <20020426214017.C34264@mars.thuis> From: Chris Shenton Date: 30 Apr 2002 21:37:05 -0400 In-Reply-To: <20020426214017.C34264@mars.thuis> Message-ID: <87adrkfy2m.fsf@thanatos.shenton.org> Lines: 17 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.1 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Axel Scheepers writes: > Still strange though it shouldn't happen. I tried some cd's over here > and they all had a isofs on the whole disk (the c part.) with microsofts > joliet extensions. > Curious; what does the output of ls -la /dev/acd0* say? I can image (but not > now for sure, or either say it is so, so don't quote me on this ;) that > the major and minor device numbers are changed (did you run mergemaster?) or > messed up. Try a sh MAKEDEV all in /dev to remake all of them. I think my problem may have been forgetting to do a mergemaster after the make world, which would have installed and run the new MAKEDEV. Just did and now it's complaining "device busy" but I suspect I've confused it. Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:42: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 8603837B417 for ; Tue, 30 Apr 2002 18:42:03 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g411dCE87953; Tue, 30 Apr 2002 22:39:12 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Tue, 30 Apr 2002 22:39:12 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: "E. J. Cerejo" Cc: Subject: Re: How to enable IP Forwarding In-Reply-To: <200204301948.10710.ecerejo@zapo.net> Message-ID: <20020430223634.B85537-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > > > Set it to the internal IP address of the BSD box. That is, the IP of the > > Ethernet interface, not the tun one. > > What command will give me that information? I've tried 'ifconfig -a' but I > don't see any IP set to fpx0. > ifconfig -a should tell you fpx0's IP. How many NICs does your box have? Are you using dialup or PPPoE? Please, post the output of an ifconfig -a. Fer > Thanks > > > > > > Fer > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:47:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from harrier.csrv.uidaho.edu (harrier.csrv.uidaho.edu [129.101.119.224]) by hub.freebsd.org (Postfix) with ESMTP id 417D237B416 for ; Tue, 30 Apr 2002 18:47:39 -0700 (PDT) Received: from uidaho.edu (Patrick-Wireless.csrv-staff.uidaho.edu [129.101.205.163]) by harrier.csrv.uidaho.edu (8.9.3 (PHNE_22672)/) with ESMTP id SAA02489 for ; Tue, 30 Apr 2002 18:47:37 -0700 (PDT) Message-ID: <3CCF4915.51D9B6A7@uidaho.edu> Date: Tue, 30 Apr 2002 18:47:01 -0700 From: Ian Hamilton X-Mailer: Mozilla 4.79 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Selectively Disabling DMA? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Recently, after a few buildworld, etc, iterations, I have been receiving the following messages seemingly at random but more often under disk activity: Apr 25 00:29:32 clancy /kernel: ad3: read interrupt arrived earlyad3: read error detected (too) late Apr 25 00:29:33 clancy /kernel: vinum: raid.p0.s2 is crashed by force Apr 25 00:29:33 clancy /kernel: vinum: raid.p0 is corrupt Apr 25 00:29:33 clancy /kernel: fatal:raid.p0.s2 read error, block 18111545 for 8192 bytes Apr 25 00:29:33 clancy /kernel: raid.p0.s2: user buffer block 54334256 for 8192 bytes Apr 25 00:29:33 clancy /kernel: ad3: read interrupt arrived earlyad3: read error detected (too) late Apr 25 00:29:33 clancy /kernel: fatal:raid.p0.s2 read error, block 18111561 for 16384 bytes Apr 25 00:29:33 clancy /kernel: raid.p0.s2: user buffer block 54334272 for 16384 bytes Apr 25 00:29:33 clancy /kernel: ad2: timeout waiting for DRQ - resetting Apr 25 00:29:33 clancy /kernel: ata1: resetting devices .. Apr 25 00:29:33 clancy /kernel: ad3: removed from configuration Apr 25 00:29:33 clancy /kernel: ad2: simplex device, DMA on primary only Apr 25 00:29:33 clancy /kernel: done Apr 25 00:29:33 clancy /kernel: vinum: Can't write config to /dev/ad3s1e, error 6 Apr 25 00:29:33 clancy /kernel: vinum: drive d3 is down etc... After much searching on the web, I found a message that indicated DMA may be a problem since I have a somewhat older motherboard (Very generic P200). After wading though a verbose boot I found the following as each of the disks were loaded: Creating DISK ad0 ar: FreeBSD check1 failed ad0: ATA-4 disk at ata0-master ad0: 7299MB (14948640 sectors), 14830 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad1: success setting WDMA2 on SiS chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: ATA-5 disk at ata0-slave ad1: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, WDMA2 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ad2: simplex device, DMA on primary only Creating DISK ad2 ar: FreeBSD check1 failed ad2: ATA-5 disk at ata1-master ad2: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, BIOSPIO ad2: piomode=4 dmamode=2 udmamode=5 cblid=1 ad3: simplex device, DMA on primary only Creating DISK ad3 ar: FreeBSD check1 failed ad3: ATA-5 disk at ata1-slave ad3: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, BIOSPIO ad3: piomode=4 dmamode=2 udmamode=5 cblid=1 What I note is the message saying "ad(2|3): simplex device, DMA on primary only" which indicates to me that DMA is only available on the primary IDE controller, not the second. My question is now this: on my laptop, with a slightly older version of BSD, built early March, I have the following sysctl: hw.atamodes: dma,---,pio,--- however, on my more recent build on this machine (Middle April) that option is no longer present. Am I now forced to turn off DMA altogether with: hw.ata.ata_dma: 0?? What I would really like is: hw.atamodes: dma,dma,pio,pio but that doesn't seem to be an option. Are there other options for selectively disabling DMA? Thanks in advance, -Ian Hamilton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 18:48:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail7.mgfairfax.rr.com (mail7.southeast.rr.com [24.93.67.54]) by hub.freebsd.org (Postfix) with ESMTP id 5B37837B420 for ; Tue, 30 Apr 2002 18:48:03 -0700 (PDT) Received: from cox.rr.com ([24.163.115.240]) by mail7.mgfairfax.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Tue, 30 Apr 2002 21:47:56 -0400 Message-ID: <3CCF494E.1040904@cox.rr.com> Date: Tue, 30 Apr 2002 21:47:58 -0400 From: Ray Kohler User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020423 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Peter MacGee , jgatsby@charter.net, listsub@rambo.simx.org Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Which list to look for software testers? References: <5.1.0.14.2.20020501102837.03332e38@mail.ideal.net.au> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Peter MacGee wrote: > Hi Ray, > > At 08:07 PM 30/04/2002 -0400, you wrote: > >> Subject says it all. I want to find testers for what will soon >> (hopefully) be a new port. > > > What sort of port? It's a front-end to afio(1) specifically for reading and writing backups on IDE CDR or CDRW drives. Its main advantage over plain afio is simplicity. It also can use pkg_tarup(1) to build packages from your ports and include those in the backup. -- Ray To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 19:20:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from zoon.lafn.org (zoon.lafn.org [206.117.18.9]) by hub.freebsd.org (Postfix) with ESMTP id 387A437B400 for ; Tue, 30 Apr 2002 19:20:30 -0700 (PDT) Received: from [10.0.1.90] (66-81-31-54-modem.o1.com [66.81.31.54]) by zoon.lafn.org (8.11.3/8.11.3) with ESMTP id g412KRl51596 for ; Tue, 30 Apr 2002 19:20:27 -0700 (PDT) (envelope-from bc979@lafn.org) Mime-Version: 1.0 X-Sender: bc979@mail.lafn.org Message-Id: In-Reply-To: References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429122206.A55341@xor.obsecurity.org> <20020430112831.B8571@wantadilla.lemis.com> Date: Tue, 30 Apr 2002 19:20:13 -0700 To: freebsd-questions@FreeBSD.ORG From: Doug Hardie Subject: Re: Windoze Disk Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I now have the disk mounted thanks to the responses and can see the directories/files that were not deleted. However, almost all that needs to be retrieved was deleted. Is there an undelete approach that will recover those files? At 19:04 -0700 4/29/02, Doug Hardie wrote: >I have a hard disk from a friend that got corrupted by a virus. The >system itself is shot. However, I want to mount it on FreeBSD so I >can recover some school papers from it for them. How do I mount the >disk? >-- >-- Doug > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message -- -- Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 19:35:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id DBD5C37B41E for ; Tue, 30 Apr 2002 19:35:07 -0700 (PDT) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id AD123816EA; Wed, 1 May 2002 12:05:05 +0930 (CST) Date: Wed, 1 May 2002 12:05:05 +0930 From: Greg 'groggy' Lehey To: Dmitry Mottl Cc: Toomas Aas , freebsd-questions@freebsd.org Subject: Re: FreeBSD patch level Message-ID: <20020501120505.J75614@wantadilla.lemis.com> References: <200204301256.g3UCuQx27263@lv.raad.tartu.ee> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday, 30 April 2002 at 19:51:34 +0400, Dmitry Mottl wrote: > On Tue, 30 Apr 2002, Toomas Aas wrote: > >>> Yes, and how to get _not_ latest 4.4-RELEASE-pX ??? >> >> For that you would need to specify the date in supfile, but I don't >> know the details since I have never done it. >> >> Why would you want a version *without* all the security fixes anyway? > Just to understand what is 4.4-RELEASE-p9 or 4.4-RELEASE-p8 or > 4.4-RELEASE-p7... There's no such thing. You're trying to apply Linux terminology to FreeBSD. We don't "patch", we update. A RELEASE is just that, a release, and so it stays the way it is. In the meantime, fixes get applied to the STABLE branch in the CVS tree. This is all described in the handbook. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 19:39: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 64F2137B404 for ; Tue, 30 Apr 2002 19:39:06 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 172k1J-0001iS-00 for questions@freebsd.org; Tue, 30 Apr 2002 19:39:05 -0700 Message-ID: <00ea01c1f0d2$a5bfe6a0$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: Bold Mode Date: Tue, 30 Apr 2002 22:40:04 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Whenever I build stuff it always tells me that it can't find a terminal sequence for bold writing. Is there one? Just curious To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 21:31:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail1.theplanet.com (mail1.theplanet.com [216.234.234.32]) by hub.freebsd.org (Postfix) with ESMTP id 09F2137B405 for ; Tue, 30 Apr 2002 21:31:32 -0700 (PDT) Received: from jheath.theplanet.com (jheath.theplanet.com [216.185.111.7] (may be forged)) by mail1.theplanet.com (8.9.3/8.9.3) with ESMTP id XAA23253; Tue, 30 Apr 2002 23:31:25 -0500 (CDT) Message-Id: <5.1.0.14.2.20020430232925.024e3540@mail.theplanet.com> X-Sender: jheath@mail.theplanet.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Tue, 30 Apr 2002 23:30:38 -0500 To: Peter Leftwich From: Justin Heath Subject: Re: OpenSSH and hosts.allow Cc: FreeBSD LIST In-Reply-To: <20020430153741.M10042-100000@earl-grey.cloud9.net> References: <5.1.0.14.2.20020428223215.02521ec0@mail.theplanet.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Peter, Thnaks. I didnt think to do a `host blah.blah.com`. That should work for now until I get everything figured out. At 03:40 PM 4/30/2002 -0400, Peter Leftwich wrote: >On Sun, 28 Apr 2002, Justin Heath wrote: > > Peter, I am using SSHd version OpenSSH_2.9 (FreeBSD localisations > 20020307). As you can see this is not installed from the ports. I am > using /etc/hosts.allow. Which is where SSHd should be looking since it is > part of the base system and not a port. Thanks. > >Oops, duh, I'd forgotten about that file (/etc/hosts.allow)! Honestly, >thanks for the reminder - now I remember why sendmail isn't working >properly (yet I can telnet port 25 of my box and deliver spoofed email). > >I would recommend you type `host my.domain.com` and use that IP in place of >your "0.0.0.0: allow" example. > > > At 02:43 PM 4/28/2002 -0400, Peter Leftwich wrote: > > >On Sun, 28 Apr 2002, Justin Heath wrote: > > > > I am trying to set up sshd (OpenSSH) to use hosts.allow . The > problem is that the rules seem to work with IP address but not host names. > > > > Example - Works: sshd: 0.0.0.0: allow > > > > Does not work: sshd: .domain.com: allow (nor) sshd: my.domain.com: > allow > > > > Any suggestions? Thanks. -Justin Heath > > > Justin, Which version of OpenSSH (`sshd -v` this says illegal option, > but then gives you the version on the next line of stderr output) are you > using? What is the path to the hosts.allow file in your references? > > Justin Heath > >Best of luck with it. I've heard various versions of ssh(d) support >hostnames, and others are strictly IP-based. > >-- >Peter Leftwich >President & Founder >Video2Video Services >Box 13692, La Jolla, CA, 92039 USA >+1-413-403-9555 Justin Heath To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 21:36:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 4EC2337B419 for ; Tue, 30 Apr 2002 21:36:49 -0700 (PDT) Received: from freebsd.localhost.local (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g414gRC08074; Tue, 30 Apr 2002 21:42:29 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Tue, 30 Apr 2002 21:42:27 -0700 From: Nathan KInkade To: Anton Shcherbinin Cc: freebsd-questions@freebsd.org Subject: Re: IPv6: how can I get rid of it Message-Id: <20020430214227.0137ef31.nkinkade@dsl-only.com> In-Reply-To: <17231605203.20020430185204@fastmail.fm> References: <743669500.20020427213601@fastmail.fm> <20020428104538.B83112@wantadilla.lemis.com> <1411696390.20020428231738@fastmail.fm> <20020429133417.1964fb3b.nkinkade@dsl-only.com> <17231605203.20020430185204@fastmail.fm> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > since it hasn't been put out yet, might it work to remove IPV6 from > > the kernel altogether by commenting out the follwing line in your > > kernel config file and then recompiling the kernel? I'm running > > 4.5-stable from releng_4_5 and I've had that line commented out for a > > month or two now and haven't seemed to have any problems. then again, > > i never really had any problems when it was there in the first place > > so this point may be irrelevant? > > > options INET6 #IPv6 communications protocols > > Thanks for the idea of recompiling, Nathan. > I wish I had no problems too. :( > Though you advised to recompile the kernel, I thought of recompiling > sendmail, ftp(d), telnet(d) and some other programs which are compiled > with something like '-DINET6' option. But I am really a newbie and I do > not know whether I break anything just removing '-DINET6' from several > /usr/src/.../Makefile's and running 'make world' then. > > I would like to have the same system as you have (4.5-STABLE, that is). > Yesterday I run > > # cvsup -h cvsup2.freebsd.org stable-supfile > > where stable-supfile contained the following: > > ================================================== > *default host=cvsup1.FreeBSD.org > *default base=/usr > *default prefix=/usr > *default release=cvs tag=RELENG_4 > *default delete use-rel-suffix > > *default compress > > src-all > ================================================== > Did I do the right thing? You wrote about '4.5-stable from releng_4_5' > and I am confused now: should I use > *default release=cvs tag=RELENG_4_5 > instead of > *default release=cvs tag=RELENG_4 > ? > > I will have holidays till May 13, but then I hope I'll be able > to *properly* cvsup my sources and recompile them (probably commenting > out '-DINET6' strings in several Makefile's). yes, i believe you did the right thing.....here's more info, though: from: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html RELENG_4 The line of development for FreeBSD-4.X, also known as FreeBSD-STABLE. RELENG_4_5 The release branch for FreeBSD-4.5, used only for security advisories and other seriously critical fixes. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 21:38:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from some.ants.ate.my.cat5.at.dsgx.org (some.ants.ate.my.cat5.at.dsgx.org [64.215.225.2]) by hub.freebsd.org (Postfix) with ESMTP id 64D2537B41B for ; Tue, 30 Apr 2002 21:38:17 -0700 (PDT) Received: from some.ants.ate.my.cat5.at.dsgx.org (localhost.dsgx.org [64.215.225.2] (may be forged)) by some.ants.ate.my.cat5.at.dsgx.org (8.12.3/8.11.6) with SMTP id g410bjuC015512 for ; Wed, 1 May 2002 00:37:45 GMT (envelope-from hh@dsgx.org) Date: Wed, 1 May 2002 00:37:45 +0000 From: hh To: freebsd-questions@freebsd.org Subject: ipfw Message-Id: <20020501003745.6704ce9f.hh@dsgx.org> Organization: dsgx net solutions X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG at an machine 4.5-p2 i tried to use ipfw limit option and worked but on 4.4-p9 didn't .. do ipfw limit works only on 4.5 release ? or it's something missing on the 4.4 ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 21:38:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id 2895B37B41A for ; Tue, 30 Apr 2002 21:38:27 -0700 (PDT) Received: from sdn-ar-008dcwashp315.dialsprint.net ([63.178.90.221] helo=moo.holy.cow) by falcon.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 172lsg-0001xG-00 for freebsd-questions@freebsd.org; Tue, 30 Apr 2002 21:38:18 -0700 Received: by moo.holy.cow (Postfix, from userid 1001) id 6AEE650BAF; Wed, 1 May 2002 00:40:48 -0400 (EDT) Date: Wed, 1 May 2002 00:40:48 -0400 From: parv To: f-q Subject: how to read cvs commit message Message-ID: <20020501044048.GA44296@moo.holy.cow> Reply-To: f-q Mail-Followup-To: f-q Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG given the commit message below... > silby 2002/04/30 20:27:35 PDT > > Modified files: (Branch: RELENG_4) > sys/kern uipc_socket.c uipc_socket2.c ... > Revision Changes Path > 1.116 +1 -2 src/sys/kern/uipc_socket.c > 1.87 +7 -1 src/sys/kern/uipc_socket2.c > > Revision Changes Path > 1.68.2.21 +1 -2 src/sys/kern/uipc_socket.c > 1.55.2.14 +7 -1 src/sys/kern/uipc_socket2.c ...do versions 1.116 & 1.87 supersede 1.68.2.21 & 1.55.2.14? that's what i would think. so, as the lines like last three are generated (w/o any heading), is it /understood/ that they always refer to older version(s)? - parv -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 21:38:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.sunflower.com (smtp.sunflower.com [24.124.0.128]) by hub.freebsd.org (Postfix) with ESMTP id C5AAC37B41D for ; Tue, 30 Apr 2002 21:38:33 -0700 (PDT) Received: from workstation4 (dv162s55.lawrence.ks.us [24.124.55.162]) by smtp.sunflower.com (8.11.6/8.11.6) with ESMTP id g414cWv25018 for ; Tue, 30 Apr 2002 23:38:32 -0500 From: "Brandon Young" To: Subject: spontaneous reboots, processor travelling back in time ... Date: Tue, 30 Apr 2002 23:38:28 -0500 Message-ID: <000601c1f0ca$0cf5f430$0100a8c0@workstation4> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Every time I try to run the command 'XFree86 -configure' my system reboots. I decided to run xf86config; that worked. Once X was configured, I tried to start kdm ... the system reboots every time I try to start X. In searching through the archives, one would be lead to believe that there exists a hardware problem. This is perplexing, since this same hardware (whichever piece may be bad) never causes problems in other operating systems (namely, Windows and Linux). My system is a 1.0 GHz AMD Thunderbird with a Kingston tulip NIC, Matrox G400 single head card, and SBLive soundcard. The processor and mobo are new. I also get another weird error. At seemingly random times, [during or shortly after a long period of compiling something] I get an error message that says something about microuptime, processor time went backwards???. I noticed on a similar machine (all the same except w/ an 800 MHz Athlon) that FreeBSD also had the microuptime issue. Any thoughts? Brandon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:17:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp2out.rdc-nyc.rr.com (nycsmtp2out.rdc-nyc.rr.com [24.29.99.227]) by hub.freebsd.org (Postfix) with ESMTP id B423E37B405 for ; Tue, 30 Apr 2002 23:17:49 -0700 (PDT) Received: from scott1.nyc.rr.com (24-168-24-239.nyc.rr.com [24.168.24.239]) by nycsmtp2out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with ESMTP id g416F0HQ008540; Wed, 1 May 2002 02:15:00 -0400 (EDT) Message-Id: <5.1.0.14.0.20020501020840.00bca4a0@pop-server.nyc.rr.com> X-Sender: scottro@pop-server.nyc.rr.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 01 May 2002 02:17:39 -0400 To: "Brandon Young" , From: Scott Subject: Re: spontaneous reboots, processor travelling back in time ... In-Reply-To: <000601c1f0ca$0cf5f430$0100a8c0@workstation4> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 23:38 2002/04/30 -0500, Brandon Young wrote: >Every time I try to run the command 'XFree86 -configure' my system >reboots. I decided to run xf86config; that worked. Once X was >configured, I tried to start kdm ... the system reboots every time I try >to start X. In searching through the archives, one would be lead to >believe that there exists a hardware problem. This is perplexing, since >this same hardware (whichever piece may be bad) never causes problems in >other operating systems (namely, Windows and Linux). My system is a 1.0 >GHz AMD Thunderbird with a Kingston tulip NIC, Matrox G400 single head >card, and SBLive soundcard. The processor and mobo are new. Is it an ASUS MB? There are still some problems with it, usually with the symptoms you describe. http://www.freebsd.org/cgi/query-pr.cgi?pr=28418 Hrrmm--I see that it seems to be resolved as of two days ago--sigh, this means I'll have to do a buildworld and see if it works without adjustment. The fix has been to open up /usr/src/sys/i386/i368/i686_mem.c Around line 269 you see u_int cr4save; mrd = sc->mr_desc; Between those two lines, insert a line return; So it'll now look like u_int cr4save; return; mrd = sc->mr_desc; It has to do with MTRR problems (This trick was given me by Bill Triplett in case he sees this post and wonders if I've forgotten--Hi Bill. :) ) This of course, assumes you have an ASUS Then, you have to recompile your kernel cd /usr/src/sys/i386/conf config MYKERN You will then see the thing something like source is ../../compile/MYKERN Don't forget to do make depend So cd ../../compile/MYKERN make depend; make; make install Reboot and you should be good to go. (You probably know all that, but I have it kept on my hard drive as a web page so am cutting and pasting--I'm really sleepy--sorry for the extraneous info) HTH Scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:31:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailbox-15.st1.spray.net (mailbox-15.st1.spray.net [212.78.202.115]) by hub.freebsd.org (Postfix) with ESMTP id B77AF37B41B for ; Tue, 30 Apr 2002 23:31:40 -0700 (PDT) Received: from hawera ([61.194.0.163]) by mailbox-15.st1.spray.net (8.8.8/8.8.8) with SMTP id IAA19638 for ; Wed, 1 May 2002 08:31:38 +0200 (DST) Posted-Date: Wed, 1 May 2002 08:31:38 +0200 (DST) Date: Wed, 1 May 2002 15:27:51 +0900 From: Tony To: freebsd-questions@FreeBSD.ORG Subject: Are there any PC-Card/PCMCIA-Card which provides a USB ports which work under FreeBSD? Message-Id: <20020501152751.4482e3c1.s4565@lycos.co.uk> X-Mailer: Sylpheed version 0.7.5 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have an old laptop without a USB port and need a USB port on it, so I am after a PC-Card/PCMCIA-Card which provides a USB ports. Do any of these cards work under FreeBSD? Cheers Tony To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:34:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from disponent.com (mailgate.boyzflat.co.uk [62.49.215.130]) by hub.freebsd.org (Postfix) with SMTP id EEFF837B41A; Tue, 30 Apr 2002 23:34:07 -0700 (PDT) Reply-To: Message-ID: <022d41a86e5a$2356d8d3$8bb66de3@lgcxgg> From: To: Cc: , , , , , Subject: Trading strategies with huge potential. Date: Wed, 01 May 2002 13:27:28 -0700 MiME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_00E1_72C27A2C.C5163C83" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ------=_NextPart_000_00E1_72C27A2C.C5163C83 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: base64 Vm9sdW1lIE92ZXIgMS4yIFRyaWxsaW9uIERvbGxhcnMgYSBEYXkgDQpUYXAg aW50byB0aGUgaGlnaC1pbmNvbWUgb3Bwb3J0dW5pdHkNCmZvdW5kIGluIHRo ZSBXb3JsZCdzIGxhcmdlc3QgZmluYW5jaWFsIG1hcmtldC4gDQoNClRoZSBG b3JlaWduIEN1cnJlbmN5IE1hcmtldHMNCg0KLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0NCg0KRGlzY292ZXIgaG93Og0KJDEwLDAwMCAi cHJvcGVybHkgcG9zaXRpb25lZCIgaW4gdGhlIEV1cm8gdnMuIHRoZSBVUyBE b2xsYXIsDQpjb3VsZCBwb3RlbnRpYWxseSBtYWtlIGEgMjAtMzBrIG1vdmUg d2l0aGluIDYtOCBtb250aHMhDQoNCkxlYXJuIGhvdyBzdWNjZXNzZnVsIHBy b2Zlc3Npb25hbCB0cmFkZXJzIGFzc2lzdGluZyB5b3UgY2FuIHBvdGVudGlh bGx5DQphY2hpZXZlIGRvdWJsZS1kaWdpdCBtb250aGx5IHJldHVybnMgb2Yg MTAtMzAlIG9yIG1vcmUhDQoNCi0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tDQoNCkZvciBhIEZSRUUgRVVSTyByZXBvcnQuDQpDbGljayBv biB0aGUgbGluayBiZWxvdy4gDQoNCmh0dHA6Ly93d3cuaW52ZXN0bWVudDR1 LmNvbS9DdXJyZW5jeUV4Y2hhbmdlLw0KDQotLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLQ0KDQpUbyBiZSB0YWtlbiBvZmYgb3VyIG1haWxp bmcgbGlzdC4NCg0KaHR0cDovL3d3dy5pbnZlc3RtZW50NHUuY29tL3Rha2Vt ZW9mZi8NCg0KMDE5NEFvR2w4LTUxOXV1ak0wMDk4cUtjRzctMDM5UE9CTjM3 MzlUb3FxNy0xMTRGYnhsNDc= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:35: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server5.safepages.com (server5.safepages.com [216.127.146.2]) by hub.freebsd.org (Postfix) with ESMTP id 2C85837B41F for ; Tue, 30 Apr 2002 23:34:51 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool20-12.nas31.philadelphia1.pa.us.da.qwest.net [65.129.20.12]) by server5.safepages.com (Postfix) with ESMTP id B05922ADD2; Wed, 1 May 2002 06:34:42 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: Fernando Gleiser Subject: Re: How to enable IP Forwarding Date: Wed, 1 May 2002 02:34:45 -0400 X-Mailer: KMail [version 1.4] Cc: References: <20020430223634.B85537-100000@localhost> In-Reply-To: <20020430223634.B85537-100000@localhost> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200205010234.45146.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 21:39, Fernando Gleiser wrote: > On Tue, 30 Apr 2002, E. J. Cerejo wrote: > > > > > > > Set it to the internal IP address of the BSD box. That is, the IP of the > > > Ethernet interface, not the tun one. > > > > What command will give me that information? I've tried 'ifconfig -a' but I > > don't see any IP set to fpx0. > > > > ifconfig -a should tell you fpx0's IP. > > How many NICs does your box have? Are you using dialup or PPPoE? > > Please, post the output of an ifconfig -a. I have one NIC and I'm using a dialup connection. Here's the output: fxp0: flags=8802 mtu 1500 ether 00:a0:c9:d9:7b:97 media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 faith0: flags=8002 mtu 1500 tun0: flags=8051 mtu 1500 inet6 fe80::2a0:c9ff:fed9:7b97%tun0 prefixlen 64 scopeid 0x6 inet 65.129.20.12 --> 63.152.0.185 netmask 0xffffff00 Opened by PID 191 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:35:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc53.attbi.com (rwcrmhc53.attbi.com [204.127.198.39]) by hub.freebsd.org (Postfix) with ESMTP id 13B7337B417 for ; Tue, 30 Apr 2002 23:35:25 -0700 (PDT) Received: from blossom.cjclark.org ([12.234.91.48]) by rwcrmhc53.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020501063520.KEDE5896.rwcrmhc53.attbi.com@blossom.cjclark.org>; Wed, 1 May 2002 06:35:20 +0000 Received: (from cjc@localhost) by blossom.cjclark.org (8.11.6/8.11.6) id g416ZJU62823; Tue, 30 Apr 2002 23:35:20 -0700 (PDT) (envelope-from cjc) Date: Tue, 30 Apr 2002 23:35:19 -0700 From: "Crist J. Clark" To: Fernando Gleiser Cc: freebsd-questions@FreeBSD.ORG Subject: Re: tcpdump(8) filtered by time Message-ID: <20020430233518.C57470@blossom.cjclark.org> Reply-To: cjclark@alum.mit.edu References: <20020430110056.B55983@blossom.cjclark.org> <20020430165309.R85537-100000@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020430165309.R85537-100000@localhost>; from fgleiser@cactus.fi.uba.ar on Tue, Apr 30, 2002 at 04:55:43PM -0300 X-URL: http://people.freebsd.org/~cjc/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 04:55:43PM -0300, Fernando Gleiser wrote: > On Tue, 30 Apr 2002, Crist J. Clark wrote: > > > Slightly off-topic, but I'd like see if anyone has any ideas. > > > > I have a tcpdump(8) file that spans a few hours. I want to isolate > > an hour somewhere in the middle and dump it to a new file. I can't > > figure out how to do this. > > Doesn't tcpslice do something like that? D'oh! Thanks. We all need to be reminded of the obvious sometimes. -- Crist J. Clark | cjclark@alum.mit.edu | cjclark@jhu.edu http://people.freebsd.org/~cjc/ | cjc@freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:41:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from some.ants.ate.my.cat5.at.dsgx.org (some.ants.ate.my.cat5.at.dsgx.org [64.215.225.2]) by hub.freebsd.org (Postfix) with ESMTP id 7ADB737B405 for ; Tue, 30 Apr 2002 23:41:22 -0700 (PDT) Received: from some.ants.ate.my.cat5.at.dsgx.org (localhost.dsgx.org [64.215.225.2] (may be forged)) by some.ants.ate.my.cat5.at.dsgx.org (8.12.3/8.11.6) with SMTP id g412epqB016290 for ; Wed, 1 May 2002 02:40:51 GMT (envelope-from hh@dsgx.org) Date: Wed, 1 May 2002 02:40:51 +0000 From: hh To: freebsd-questions@freebsd.org Subject: see this . Message-Id: <20020501024051.42e9f1b9.hh@dsgx.org> Organization: dsgx net solutions X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i made cvsup so i could get the latest version of ipfw .. so i could use the limit option but guess some# man ipfw |grep limit These dynamic rules, which have a limited lifetime, are checked at the limitation using WF2Q). ging limit rather than net.inet.ip.fw.verbose_limit, where the value ``0'' removes the logging limit. Logging may then be re- Console logging and the log limit are adjustable dynamically limited to the bits which are set in the mask. and the length of the port list is limited to IP_FW_MAX_PORTS same protocol. The rule has a limited lifetime (con- A value of 0 (default) means unlimited bandwidth. The unit must Maximum number of dynamic rules. When you hit this limit, no A first and efficient way to limit access (not using dynamic rules) is To limit the number of connections a user can open you can use the fol- ipfw add allow tcp from my-net/24 to any setup limit src-addr 10 -> ipfw add allow tcp from any to me setup limit src-addr 4 such attacks can be partially limited by acting on a set of sysctl(8) We can use pipes to artificially limit bandwidth, e.g. on a machine act- ing as a router, if we want to limit traffic from local clients on Should we like to simulate a bidirectional link with bandwidth limita- connection often becomes a limiting factor much more than bandwidth: all traffic. Because the pipes have no limitations, the only effect is A more sophisticated example is limiting the outbound traffic on a net with per-host limits, rather than per-network limits: that's the option im try 1.1.1.1 -> i changed because i didn't wanna tell my real addr .. oh well u guys can understand and im running in 4.4-RELEASE-p9 i updated the src .. probably is 4.5p4 now .. and on the another machine is an 4.5p2 .. and this same commands works .. how should i proceed ? the only way is to build/install world .. and recompile kernel and reboot ? thx for your time some# ipfw add allow tcp from any to 1.1.1.1 80 limit src-addr 20 ipfw: error: unknown argument ``limit'' .. and bellow here show me all the help of ipfw .. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Apr 30 23:56:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 0EB4037B400 for ; Tue, 30 Apr 2002 23:56:38 -0700 (PDT) Received: from freebsd.localhost.local (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g4172CC08385; Wed, 1 May 2002 00:02:13 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Wed, 1 May 2002 00:02:12 -0700 From: Nathan KInkade To: "Henning, Brian" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: burning software Message-Id: <20020501000212.6320efcc.nkinkade@dsl-only.com> In-Reply-To: References: X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, 30 Apr 2002 15:20:13 -0500 "Henning, Brian" wrote: > Hello- > I have a quick question about cd burning. Is there a shell for burncd for > x-windows? I have an ide burner and I could use something simple and easy to > burn cds. Could some one point to the location in the ports dir or maybe to > a package? > Thanks, about a year ago i ran into the same issue. at that time i put together a small perl script that will allow me to burn audio/data cds more easily. granted, it's not X based, but it's fairly simple. i haven't used it in quite a long time, and i never did really finish it or test it fully....but the last time I used it it worked fine. basically it *should* allow you to do these things: - burn either an audio or data cd - if it's a data cd you can copy from cd-->cd, or you can specify a location on the hard disk where an ISO file exists - if it's an audio cd you can copy a CD song for song, or you can rip various tracks from one or various CDs and then order the songs to your satisfaction - alternately, if it's an audio cd you can specify to burn a CD from WAV files that are located somewhere on your hard disk and then order them as you please - this utility uses the following apps: dagrab, mkisofs, and burncd. it's not much, but it's a step up from doing it manually, although there may X based ide/atapi burning programs - i haven't looked. maybe it could be of some use to you: http://63.105.21.156/download/burnit.PL note { to any die-hard perl programmers: this was the first thing i ever wrote in perl, and i haven't really gone back to clean up at all. i'm sure it's fairly messy, and possibly poorly written...not to mention, it contains no comments. i may scour the code soon for more efficiency and better readablility. Thanks. } To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 0:14:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id 8154137B41B for ; Wed, 1 May 2002 00:14:28 -0700 (PDT) Received: from there (red-corb1-200383-238.telnor.net [200.38.3.238]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVF002T688HC6@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 00:17:08 -0700 (PDT) Date: Mon, 29 Apr 2002 17:31:46 -0700 From: jehova To: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVF002T788IC6@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG testing my kmailer, ok? -- #@*!--->(+) _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 0:39:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id 4E28737B419 for ; Wed, 1 May 2002 00:39:12 -0700 (PDT) Received: from there (red-corb1-2003822-47.telnor.net [200.38.22.47]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVF002LL9DM68@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 00:41:47 -0700 (PDT) Date: Mon, 29 Apr 2002 17:56:28 -0700 From: jehova Subject: mouse code in kernel To: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVF002LM9DN68@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi, there is a piece of code in kernel that cares about mouse, if i have a related question on it, what mail list i need to join? -- #@*!--->(+) _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 0:41:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from polonez.inetia.pl (polonez.inetia.pl [195.114.161.60]) by hub.freebsd.org (Postfix) with ESMTP id 6F47A37B417 for ; Wed, 1 May 2002 00:41:34 -0700 (PDT) Received: from lars.internetia.pl (lars.internetia.pl [195.114.173.133]) by polonez.inetia.pl (Sun Internet Mail Server sims.4.0.1999.06.13.00.20) with ESMTP id <0GVF00DGM9IPPN@polonez.inetia.pl> for freebsd-questions@freebsd.org; Wed, 1 May 2002 09:44:49 +0200 (MET DST) Received: from www-data by lars.internetia.pl with local (Exim 3.35 #1) for freebsd-questions@FreeBSD.ORG id 172ohG-0005HI-00; Wed, 01 May 2002 09:38:42 +0200 Received: from 150.254.206.144 ( [150.254.206.144]) as user po789757@imap-po.inetia.pl by imail.internetia.pl with HTTP; Wed, 01 May 2002 09:38:42 +0200 Date: Wed, 01 May 2002 09:38:42 +0200 From: tomasz.roszak@inetia.pl Subject: Network To: freebsd-questions@FreeBSD.ORG Message-id: <1020238722.3ccf9b822bd25@imail.internetia.pl> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-2 Content-transfer-encoding: 7BIT User-Agent: Internet Messaging Program (IMP) 3.1-cvs X-Remote-Addr: 150.254.206.144 X-Forwarded-For: X-Scanner: exiscan *172ohG-0005HI-00*1RgEIkEKgwI* (Internetia ) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have network card AMD 79c975 (PCNET32). After instalation system writing message: Hartbeat error - SQE test failed. This messages is non-stop by 30 sec. What it's? Tomasz Roszak To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 0:57:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id 40EBA37B416 for ; Wed, 1 May 2002 00:57:10 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 21347.239799.1020.1s5862458sheridan ; Wed, 01 May 2002 09:56:39 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: tornadox@telnor.net, freebsd-questions@FreeBSD.ORG Subject: Re: mouse code in kernel Date: Wed, 1 May 2002 09:57:06 +0200 X-Mailer: KMail [version 1.4] References: <0GVF002LM9DN68@email.telnor.net> In-Reply-To: <0GVF002LM9DN68@email.telnor.net> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200205010957.06237.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 2:56 am, jehova wrote: > hi, > there is a piece of code in kernel that cares about mouse, if i > have a related question on it, what mail list i need to join? try here first To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 1:17: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id E06DB37B419 for ; Wed, 1 May 2002 01:16:58 -0700 (PDT) Received: from there (red-corb1-2003822-47.telnor.net [200.38.22.47]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVF002GSB4O60@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 01:19:38 -0700 (PDT) Date: Mon, 29 Apr 2002 18:34:17 -0700 From: jehova Subject: mouse code in kernel To: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVF002GTB4O60@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Description *when i want to cut and paste a text on GUI (X11),hightlighted text is one or even several characters later (ON CONSOLE(ttyn) MODE NOT). I see a report: "o [2002/02/15] ports/34974 kde Incorrect mouse config in kde 2.2.2" (submited from freebsd bugmaster to a mail list) and same happen to me  but , EVEN without KDE using other GUI (X)enviroment then isn't a kde problem we think.  even happen with my old freebsd 4.4 (with kde 2.2 canned package) some body cant helpme? where can i search? *mouse works fine and do everything, if i move it regular or slow motion, but if i want to draw boxes when i click and drag and move normal or fast my hand box, apears not on the right place where i start hold left button box is draw later (offset movement or delayed event). *if i do click and drag to scrollbar for moving my entire window to other place, mouse pointer fails to grab or engage window but if i do slowly it works fine. and sometimes this window "thinks" that i 'm trying to resize clicking and holding for resize, and same if is slow don't fails. *for resize my windows from its borders (sides or bottom) fails to grab it.i need to find "where" engages that side of window. i was thinking is a KDE problem , i deinstall and run XFCE and works same way, i was thinking is a gimp problem but is not. all scrollbars of all WM and aplications, and all rectangle tools of diferents drawing programs do same offset. my box runs Freebsd 4.5, KDE 2.2.2, gimp 1.2.3, 128 Mb ram celeron633 SiS6326 graphics card and 3.3.6_11 XFree86. How-To-Repeat on GUI select some text or try to mark or draw a rectangle, fast as usual, i mean no carefully or slow to try do normal routine. more faster more offset or delayed response. (some body says "this not happen on my system" but i install as is from CDROM) ___^___ i've been tried with xfree86 3.3.6, 4.1.*, and 4.2.*, on linux (mandrake7.2, 8.0, and 8.1) and same tries on freebsd 4.4 and 4.5 mouse works fine absolutely on linux, this is why i think is concerning to freebsd kernel code. any light? -- #@*!--->(+) _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 1:20:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id F10A137B417 for ; Wed, 1 May 2002 01:20:32 -0700 (PDT) Received: from there (red-corb1-2003822-47.telnor.net [200.38.22.47]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVF001YLBANQ6@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Wed, 1 May 2002 01:23:13 -0700 (PDT) Date: Mon, 29 Apr 2002 18:37:53 -0700 From: jehova Subject: adjust time and date: system refuses to do it To: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVF001YMBAOQ6@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG my machine change time and date and when try to adjust system complaints: time and date can't adjust. i checked CMOS and is changed there too, i have installed a tri-OS-boot, i mean LILO boot loader for select windows, linux and Freebsd. any light on this? if more info is needed i'll send it, #-*info*- kris[/root]# uname -a FreeBSD kris.telnor.net 4.5-RELEASE FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC i386 kris[/root]# thanks -- #@*!--->(+) _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 1:21: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from noname.csdl.lt (noname.csdl.lt [194.176.40.182]) by hub.freebsd.org (Postfix) with SMTP id 0ED4337B417 for ; Wed, 1 May 2002 01:20:42 -0700 (PDT) Received: (qmail 14134 invoked by uid 1000); 1 May 2002 08:20:37 -0000 Date: Wed, 1 May 2002 10:20:37 +0200 From: Paulius Bulotas To: questions@FreeBSD.ORG Subject: Re: burning software Message-ID: <20020501082037.GA14038@kaktusas.org> Mail-Followup-To: questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Kj7319i9nmIyA2yE" Content-Disposition: inline In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --Kj7319i9nmIyA2yE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, On 02 04 30, Henning, Brian wrote: > I have a quick question about cd burning. Is there a shell for burncd for > x-windows? I have an ide burner and I could use something simple and easy to try to upgrade to 4.5-STABLE, which features new ata code which will allow to use cdrecord (from ftp://freebsd.dk), then you could use any cdrecord frontend. Beware, that for some the new code breaks things and should not be used on production machine (because after upgrading there's no easy way back ;) [until 4.6-RELEASE] Although, I used it (and now 5.0-DP1) and there weren't any problems. Regards, Paulius --Kj7319i9nmIyA2yE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjzPpVUACgkQIHXN0dCMzj+jUwCgj7iInqmRLMtmlYizj9O4IxBb 7MYAnjGvFIcZeSNGdUj6Zu7/EY4Z8c9A =qAty -----END PGP SIGNATURE----- --Kj7319i9nmIyA2yE-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 1:23:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 44F0E37B419 for ; Wed, 1 May 2002 01:23:20 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g418NIr53876 for ; Wed, 1 May 2002 09:23:19 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200205010823.g418NIr53876@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: ifconfig syntax in rc.conf Date: Wed, 1 May 2002 09:23:17 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 04/30/2002 at 13:18:35, Ryan Hill said: > mark, this is cool - thanks! > > is this documented somewhere and I just blatantly missed it? I'm not sure. I wanted to set the media type for a DHCP-configured interface and found the rc.conf method didn't parse anything after dhcp. Trawling through the network startup scripts I saw that start_if.* is sourced as part of the interface configuration, if it exists. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 1:29:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id A043D37B41C for ; Wed, 1 May 2002 01:29:30 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g418TUr53900 for ; Wed, 1 May 2002 09:29:30 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200205010829.g418TUr53900@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: PHP4 & Apache_1.3.24 Date: Wed, 1 May 2002 09:29:29 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 04/30/2002 at 20:00:54, Christopher J. Umina said: > Okay, this is pissing me off.. When I build PHP4 with the IMAP enabled and > pointed at /usr/local so it picks up c-client I get this error. I guess you're not building apache and mod_php4 from ports. Using the ports is really the easiest way to build these packages and you don't lose anything by doing so. The mod_php4 port has a nice tui-based module selection screen and it sets the relevant configure arguments for you. It works too. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2: 1:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gold.vosn.net (gold.vosn.net [209.197.228.26]) by hub.freebsd.org (Postfix) with ESMTP id 731CD37B41A for ; Wed, 1 May 2002 02:01:10 -0700 (PDT) Received: from .localdomain ([127.0.0.1] helo=gold.vosn.net) by gold.vosn.net with esmtp (Exim 3.35 #1) id 172pz7-0002SH-00 for freebsd-questions@freebsd.org; Wed, 01 May 2002 05:00:51 -0400 Subject: upayhalf.com mailing list memberships reminder From: mailman-owner@gold.vosn.net To: freebsd-questions@freebsd.org X-No-Archive: yes X-BeenThere: Prospects@americandishnetwork.com X-Mailman-Version: 2.0.8 Message-Id: Date: Wed, 01 May 2002 05:00:51 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - gold.vosn.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [0 0] X-AntiAbuse: Sender Address Domain - americandishnetwork.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a reminder, sent out once a month, about your upayhalf.com mailing list memberships. It includes your subscription info and how to use it to change it or unsubscribe from a list. You can visit the URLs to change your membership status or configuration, including unsubscribing, setting digest-style delivery or disabling delivery altogether (e.g., for a vacation), and so on. In addition to the URL interfaces, you can also use email to make such changes. For more info, send a message to the '-request' address of the list (for example, Promo-request@upayhalf.com) containing just the word 'help' in the message body, and an email message will be sent to you with instructions. If you have questions, problems, comments, etc, send them to mailman-owner@gold.vosn.net. Thanks! Passwords for freebsd-questions@freebsd.org: List Password // URL ---- -------- Promo@upayhalf.com cahato http://upayhalf.com/mailman/options/promo_upayhalf.com/freebsd-questions%40freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2: 1:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gold.vosn.net (gold.vosn.net [209.197.228.26]) by hub.freebsd.org (Postfix) with ESMTP id 8FA1F37B41B for ; Wed, 1 May 2002 02:01:17 -0700 (PDT) Received: from .localdomain ([127.0.0.1] helo=gold.vosn.net) by gold.vosn.net with esmtp (Exim 3.35 #1) id 172pzE-0002VZ-00 for questions@freebsd.org; Wed, 01 May 2002 05:00:58 -0400 Subject: upayhalf.com mailing list memberships reminder From: mailman-owner@gold.vosn.net To: questions@freebsd.org X-No-Archive: yes X-BeenThere: Prospects@americandishnetwork.com X-Mailman-Version: 2.0.8 Message-Id: Date: Wed, 01 May 2002 05:00:58 -0400 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - gold.vosn.net X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [0 0] X-AntiAbuse: Sender Address Domain - americandishnetwork.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a reminder, sent out once a month, about your upayhalf.com mailing list memberships. It includes your subscription info and how to use it to change it or unsubscribe from a list. You can visit the URLs to change your membership status or configuration, including unsubscribing, setting digest-style delivery or disabling delivery altogether (e.g., for a vacation), and so on. In addition to the URL interfaces, you can also use email to make such changes. For more info, send a message to the '-request' address of the list (for example, Promo-request@upayhalf.com) containing just the word 'help' in the message body, and an email message will be sent to you with instructions. If you have questions, problems, comments, etc, send them to mailman-owner@gold.vosn.net. Thanks! Passwords for questions@freebsd.org: List Password // URL ---- -------- Promo@upayhalf.com towici http://upayhalf.com/mailman/options/promo_upayhalf.com/questions%40freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2: 2: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu12.email.msn.com (cpimssmtpu12.email.msn.com [207.46.181.87]) by hub.freebsd.org (Postfix) with ESMTP id 0499E37B417 for ; Wed, 1 May 2002 02:01:53 -0700 (PDT) Received: from thebe ([67.24.226.174]) by cpimssmtpu12.email.msn.com with Microsoft SMTPSVC(5.0.2195.4905); Wed, 1 May 2002 02:01:16 -0700 From: "Aaron Burke" To: "FreeBSD-Questions" Subject: Update from 4.4-release to 4.5-stable question. Date: Wed, 1 May 2002 02:01:28 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-OriginalArrivalTime: 01 May 2002 09:01:16.0512 (UTC) FILETIME=[C078F600:01C1F0EE] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello list. I am interested in updating my primary FreeBSD box (Alpha) to version 4.5. I am wondering if someone can point out which files I need to get. I have used cvs with the following script. However, I have never updated the entire system, and I am not sure I am doing so correctly. This scipt has worked fine from `cd /root; cvsup -L 2 stable-supfile`. Contents of /root/stable-supfile *default host=cvsup8.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=RELENG_4 *default delete use-rel-suffix *default compress src-all I am not an expert at using CVSup, and have used it (successfully) about twice to update ports. But never to update a system. Do I need to get 4.5-release first? What am I doing wrong? Thank you in advance for you help and suggestions. Aaron Burke NullPlusOne.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2: 9:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu09.email.msn.com (cpimssmtpu09.email.msn.com [207.46.181.84]) by hub.freebsd.org (Postfix) with ESMTP id 620F237B416 for ; Wed, 1 May 2002 02:09:29 -0700 (PDT) Received: from thebe ([67.24.226.174]) by cpimssmtpu09.email.msn.com with Microsoft SMTPSVC(5.0.2195.4617); Wed, 1 May 2002 02:08:52 -0700 From: "Aaron Burke" To: "Aaron Burke" Cc: "FreeBSD-Questions" Subject: RE: Update from 4.4-release to 4.5-stable question. Date: Wed, 1 May 2002 02:09:05 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-OriginalArrivalTime: 01 May 2002 09:08:52.0942 (UTC) FILETIME=[D086A6E0:01C1F0EF] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Oh yeah, forgot to mention the big part of the problem. (Please forgive my ignorance.) alpha# cd /sys/i386/conf/ alpha# config alpha ERROR: version of config(8) does not match kernel! config version = 400018, version required = 400019 Make sure that /usr/src/usr.sbin/config is in sync with your /usr/src/sys and install a new config binary before trying this again. If running the new config fails check your config file against the GENERIC or LINT config files for changes in config syntax, or option/device naming conventions > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Aaron Burke > Sent: Wednesday, May 01, 2002 02:01 AM > To: FreeBSD-Questions > Subject: Update from 4.4-release to 4.5-stable question. > > > Hello list. > > I am interested in updating my primary FreeBSD box (Alpha) to > version 4.5. I am wondering if someone can point > out which files I need to get. I have used cvs with the following > script. However, I have never updated the entire system, and I am > not sure I am doing so correctly. This scipt has worked fine from > `cd /root; cvsup -L 2 stable-supfile`. > > Contents of /root/stable-supfile > *default host=cvsup8.FreeBSD.org > *default base=/usr > *default prefix=/usr > *default release=cvs tag=RELENG_4 > *default delete use-rel-suffix > *default compress > src-all > > I am not an expert at using CVSup, and have used it (successfully) about > twice to update ports. But never to update a system. Do I need to get > 4.5-release first? What am I doing wrong? > > Thank you in advance for you help and suggestions. > > Aaron Burke > NullPlusOne.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2:12:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from void.xpert.com (xpert.com [199.203.132.1]) by hub.freebsd.org (Postfix) with ESMTP id BD9B837B417 for ; Wed, 1 May 2002 02:12:28 -0700 (PDT) Received: from mailserv.xpert.com ([199.203.132.135]) by void.xpert.com with esmtp (Exim 3.22 #1) id 172q4b-0004H6-00; Wed, 01 May 2002 12:06:53 +0300 Received: by mailserv.xpert.com with Internet Mail Service (5.5.2653.19) id ; Wed, 1 May 2002 12:12:05 +0300 Message-ID: From: Yonatan Bokovza To: 'Scott Pilz' , freebsd-questions@freebsd.org Subject: RE: Security Date: Wed, 1 May 2002 12:12:04 +0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: Scott Pilz [mailto:tech@tznet.com] > Sent: Wednesday, May 01, 2002 04:34 > To: freebsd-questions@freebsd.org > Subject: Security > > > > Looking to tie down BSD to the point of no return. > > Any way to disable single-user mode? No. But you can require root's password to use single user mode if you alter /etc/ttys "console" line to unsecure. Like it's written in that file. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2:15: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from Mgw1-in.NCTU.edu.tw (Mgw1-in.nctu.edu.tw [140.113.54.37]) by hub.freebsd.org (Postfix) with ESMTP id 7A1B037B417 for ; Wed, 1 May 2002 02:14:57 -0700 (PDT) Received: from Terry.Dorm11.NCTU.edu.tw (Terry.Dorm11.NCTU.edu.tw [140.113.192.99]) by Mgw1-in.NCTU.edu.tw (8.12.3/8.12.3) with ESMTP id g418v2DD059285; Wed, 1 May 2002 16:57:02 +0800 (CST) Received: from Terry.Dorm11.NCTU.edu.tw (ijliao@localhost [127.0.0.1]) by Terry.Dorm11.NCTU.edu.tw (8.12.3/8.12.3) with ESMTP id g418vB1M037206; Wed, 1 May 2002 16:57:12 +0800 (CST) (envelope-from ijliao@Terry.Dorm11.NCTU.edu.tw) Received: (from ijliao@localhost) by Terry.Dorm11.NCTU.edu.tw (8.12.3/8.12.3/Submit) id g418vBxG037205; Wed, 1 May 2002 16:57:11 +0800 (CST) Date: Wed, 1 May 2002 16:57:10 +0800 From: Ying-Chieh Liao To: Mark Rowlands Cc: Lutz Horn , freebsd-questions@FreeBSD.ORG Subject: Re: Xircom CreditCard 10/100 Configuration Message-ID: <20020501085710.GA36948@terry.dragon2.net> References: <20020427134911.GA2993@lutz-horn.de> <200204291401.03502.mark.rowlands@minmail.net> <20020429194554.GA6406@lutz-horn.de> <200204292223.10553.mark.rowlands@minmail.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="k+w/mQv8wyuph6w0" Content-Disposition: inline In-Reply-To: <200204292223.10553.mark.rowlands@minmail.net> User-Agent: Mutt/1.3.28i X-Operating-System: FreeBSD 5.0-CURRENT i386 X-PGP-Key-Location: http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0x11C02382 X-PGP-Key-Fingerprint: 4E98 55CC 2866 7A90 EFD7 9DA5 ACC6 0165 11C0 2382 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --k+w/mQv8wyuph6w0 Content-Type: text/plain; charset=big5 Content-Disposition: inline On Mon, Apr 29, 2002 at 22:23:10 +0200, Mark Rowlands wrote: > add to /etc/sysctl.conf > machdep.pccard.mem_start=0xd0000 is this a -stable only setting ? I'm using -current with NEWCARD config, but I dont have this one :< and, I cant set pccard to use irqs other than 11 I've set pccardd_flags="-I -i 3", but no use :< I wonder if I can set it in kernel config file ... -- Pi seconds is a nanocentury. --- Tom Duff --k+w/mQv8wyuph6w0 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (FreeBSD) iD8DBQE8z63mrMYBZRHAI4IRAnBbAJwJgjFw8/x9PAtZ838x1raJCGdrJwCgodnF Pb5QMetrwYwHVOPVnqu6NQk= =x3YQ -----END PGP SIGNATURE----- --k+w/mQv8wyuph6w0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 2:16:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cerebellum.za.net (cerebellum.za.net [196.34.172.103]) by hub.freebsd.org (Postfix) with ESMTP id AF8F037B41B for ; Wed, 1 May 2002 02:16:05 -0700 (PDT) Received: from bertlaptop (vic-dial-196-30-239-51.mweb.co.za [196.30.239.51]) by cerebellum.za.net (8.11.6/8.11.3) with SMTP id g419Lth87971 for ; Wed, 1 May 2002 09:21:56 GMT (envelope-from ian@cerebellum.za.net) Message-ID: <019401c1f0f1$44aa98a0$33ef1ec4@bertlaptop> From: "Ian Barnes" To: Subject: virtusertable Date: Wed, 1 May 2002 11:19:14 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi, in my virtusertable file i would like it that when an email is sent to a specific email address, it should be delivered to a few local accounts. how do i set that up, would i just add each user in the file, separated by commas or semi-colons ? thankz for the help /ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 3:30:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.san.rr.com (smtp2.san.rr.com [24.25.195.39]) by hub.freebsd.org (Postfix) with ESMTP id 81D5A37B417 for ; Wed, 1 May 2002 03:30:34 -0700 (PDT) Received: from 24-161-164-113.san.rr.com (24-161-164-113.san.rr.com [24.161.164.113]) by smtp2.san.rr.com (8.11.4/8.11.4) with ESMTP id g41AUXF20734 for ; Wed, 1 May 2002 03:30:34 -0700 (PDT) Date: Wed, 1 May 2002 03:30:33 -0700 (PDT) From: Peter Leftwich X-X-Sender: root@66-75-1-142.san.rr.com To: FreeBSD Questions LIST Subject: /etc/mail/relay-domains vs /etc/hosts.allow Message-ID: <20020501032847.N526-100000@66-75-1-142.san.rr.com> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If I want my (dynamic) IP to be able to accept incoming email for, say, root@my-ip-here do I enable the SMTP IP address in relay-domains as "RELAY" or do I add a listing to hosts.allow for the same SMTP IP address as an "allow?" Or do I do both? Help! -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 3:32: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id DC1B437B419 for ; Wed, 1 May 2002 03:31:59 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id A3EB949AB2; Wed, 1 May 2002 12:32:21 +0200 (CEST) Date: Wed, 1 May 2002 12:32:21 +0200 From: Axel Scheepers To: rui zhao Cc: freebsd-questions@FreeBSD.org Subject: Re: question on the setting up of the PPP connection Message-ID: <20020501123221.A71808@mars.thuis> Reply-To: Axel Scheepers References: <20020429132053.64246.qmail@web20807.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020429132053.64246.qmail@web20807.mail.yahoo.com>; from zhaorui929@yahoo.com.au on Mon, Apr 29, 2002 at 11:20:53PM +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Mon, Apr 29, 2002 at 11:20:53PM +1000, rui zhao wrote: > dear sir, > > I try to connection two computers which have > FreeBSD installed in through null-modem cable using > PPP connection. > In the freebsd handbook, I can not find the > related information which talk about PPP connection on > null modem cable. > Can you tell me why? or It happens because i > didn't find the right place in the handbook. > I use the ppp.conf file in server and client side > which is provided on the website > ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/src/share/examples/ppp/ppp.conf.sample > # Example to connect using a null-modem cable: > > the command I used is: > ppp -background direct-server > > but I got an error message in the log file which > is: > can not find CD. > I think CD means carrier detect. why it happens? > thanks a lot for your help. > > Rui > > http://messenger.yahoo.com.au - Yahoo! Messenger > - A great way to communicate long-distance for FREE! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Hi, I quickly read the example script and it seems to me that what you want to do is ppp over tcp/ip. That means that a working tcp connection should exist between the two machines. The best way to accomplish this is to use SLIP or PLIP. You should be able to 'ping' the both machines from eachother after that. When set up, you could add ppp to inetd.conf as described in the example. The client should then be able to connect using the tcp-client part in the example. If you just need a tcp/ip connection between the machines (so you can FTP etc) SLIP or PLIP setup is sufficient. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Predestination was doomed from the start. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 4:30:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 530CC37B41E for ; Wed, 1 May 2002 04:30:17 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g41BUFr54502 for ; Wed, 1 May 2002 12:30:16 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200205011130.g41BUFr54502@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: /etc/mail/relay-domains vs /etc/hosts.allow Date: Wed, 1 May 2002 12:30:14 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 05/01/2002 at 03:30:33, Peter Leftwich said: > If I want my (dynamic) IP to be able to accept incoming email for, say, > root@my-ip-here do I enable the SMTP IP address in relay-domains as "RELAY" > or do I add a listing to hosts.allow for the same SMTP IP address as an > "allow?" Or do I do both? Help! A properly configured sendmail would use neither of those files for this purpose. Instead you would put the domain name(s) you wish to relay for (and which are local to your server) in /etc/mail/local-host-names (previously called sendmail.cw). If you have a local network e.g. 192.168.0/24 and the access.db feature of sendmail is enabled you might add the following to /etc/mail/access: 192.168.0 RELAY To answer your original question, relay-domains usually specifies domains you wish to relay for but aren't necessarily local to your server. You generally don't want to be an open relay so this file may be of little use in your case. /etc/hosts.allow controls who may or may not *connect* to your SMTP service. It may be useful for any IPs you specifically want to deny access to your service but it's not a good way to control mail routing. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 4:38:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 55B8D37B404 for ; Wed, 1 May 2002 04:38:31 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g41BcUr54531 for ; Wed, 1 May 2002 12:38:30 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200205011138.g41BcUr54531@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: RE: virtusertable Date: Wed, 1 May 2002 12:38:29 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 05/01/2002 at 02:19:14, Ian Barnes said: > in my virtusertable file i would like it that when an email is sent to a > specific email address, it should be delivered to a few local accounts. > > how do i set that up, would i just add each user in the file, separated by > commas or semi-colons ? The usefulness of /etc/mail/virtusertable is in translating e-mail addresses from one format to another, e.g. delivering wildcarded domain addresses to multiple local mailboxes. Although what you describe can be done using virtusertable, this is a good example for the use of /etc/mail/aliases. Look at /etc/mail/aliases for the required syntax. You can put multiple names on the right-hand-side of an alias separated by a space. Placing a comma after a name on the right-hand-side of an alias prevents that entry being parsed as an alias itself. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 4:41:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.smtphost.com (smtp02.smtphost.com [196.38.110.4]) by hub.freebsd.org (Postfix) with ESMTP id B012C37B417 for ; Wed, 1 May 2002 04:41:24 -0700 (PDT) Received: from [196.38.110.24] (HELO mail01.infosat.net) by smtp02.smtphost.com (CommuniGate Pro SMTP 3.5.9) with ESMTP id 13861180 for questions@freebsd.org; Wed, 01 May 2002 13:41:12 +0200 Received: from [196.25.253.13] (account ) by mail01.infosat.net (CommuniGate Pro WebUser 3.5.9) with HTTP id 62210383 for ; Wed, 01 May 2002 13:41:12 +0200 From: "mark pearce" Subject: cdrom not working after cvsup To: questions@freebsd.org X-Mailer: CommuniGate Pro Web Mailer v.3.5.9 Date: Wed, 01 May 2002 13:41:12 +0200 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi All I have this strange problem. I cvsup'd last night and rebuild my system, I just added my own firewall options to the new GENERIC conf file and rebuilt. Now when I try mounting my cdrom using either mount /cdrom or mount_cd9660 /dev/acd0c /cdrom for example, I get the error cd9660: /dev/acd0c: Device not configured My dmesg shows acd0: CDROM at ata0-master PIO4 If I reboot using my generic 4.5-RELEASE kernel I can mount the cdrom, I cannot do this with 4.5-STABLE. I have run make buildworld, installworld, buildkernel, installkernel, mergemaster and MAKEDEV in /dev. What am I doing wrong here ? I'm convinced it's not a hardware issue as this cdrom works 100% with the RELEASE kernel, and I have not removed cdrom support in my new kernel. Please help Regards Mark == Get new ringtones and logos for your cellphone from Ananzi! [http://www.exactmobile.com/ananzi/] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 4:48:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lerlaptop.lerctr.org (lerlaptop.lerctr.org [207.158.72.14]) by hub.freebsd.org (Postfix) with ESMTP id C8D9537B41A for ; Wed, 1 May 2002 04:48:16 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by lerlaptop.lerctr.org (8.12.3/8.12.3) with ESMTP id g41Bm5WQ000844; Wed, 1 May 2002 06:48:06 -0500 (CDT) (envelope-from ler@lerctr.org) Subject: Re: cdrom not working after cvsup From: Larry Rosenman To: mark pearce Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 01 May 2002 06:48:05 -0500 Message-Id: <1020253686.601.6.camel@lerlaptop> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 2002-05-01 at 06:41, mark pearce wrote: > Hi All > > I have this strange problem. I cvsup'd last night and > rebuild my system, I just added my own firewall options to > the new GENERIC conf file and rebuilt. > > Now when I try mounting my cdrom using either mount /cdrom > or mount_cd9660 /dev/acd0c /cdrom for example, I get the > error cd9660: /dev/acd0c: Device not configured > > My dmesg shows acd0: CDROM at ata0-master > PIO4 > If I reboot using my generic 4.5-RELEASE kernel I can mount > the cdrom, I cannot do this with 4.5-STABLE. > > I have run make buildworld, installworld, buildkernel, > installkernel, mergemaster and MAKEDEV in /dev. > > What am I doing wrong here ? I'm convinced it's not a > hardware issue as this cdrom works 100% with the RELEASE > kernel, and I have not removed cdrom support in my new > kernel. > I'll bet you have a back dated MAKEDEV. The minor numbers for acd0[ac] are now the same. check your MAKEDEV for the $FreeBSD tag, I have: # $FreeBSD: src/etc/MAKEDEV,v 1.243.2.47 2002/04/21 19:47:06 will Exp $ I don't remember which update fixed this one. > Please help > > Regards > Mark > > == > Get new ringtones and logos for your cellphone from Ananzi! > [http://www.exactmobile.com/ananzi/] > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: ler@lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 4:56:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web10407.mail.yahoo.com (web10407.mail.yahoo.com [216.136.130.99]) by hub.freebsd.org (Postfix) with SMTP id 100DE37B416 for ; Wed, 1 May 2002 04:56:36 -0700 (PDT) Message-ID: <20020501115635.27714.qmail@web10407.mail.yahoo.com> Received: from [212.56.224.37] by web10407.mail.yahoo.com via HTTP; Wed, 01 May 2002 13:56:35 CEST Date: Wed, 1 May 2002 13:56:35 +0200 (CEST) From: =?iso-8859-1?q?yacine=20mihoubi?= To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Monsieur Yacine Mihoubi BP 05 Mansoura 34100 w-bba Algerie j'ai créer un logiciel et j'ai conserver dans un cdrom et souhaite vender ce cdrom dans votre pays quel sont les demarches a suivre ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 5: 1:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id E991D37B416; Wed, 1 May 2002 05:01:53 -0700 (PDT) Received: (from mwlucas@localhost) by blackhelicopters.org (8.11.6/8.11.6) id g41C0oH92350; Wed, 1 May 2002 08:00:50 -0400 (EDT) (envelope-from mwlucas) Date: Wed, 1 May 2002 08:00:50 -0400 From: Michael Lucas To: David Zhuo Cc: "'questions@FreeBSD.org'" , "'doc@FreeBSD.org'" Subject: Re: ahc1: Someone reset channel A Message-ID: <20020501080050.B92279@blackhelicopters.org> References: <931CD0CD4D2BD411AB7C00508BC7557C034BC024@sfmail3.looksmart.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <931CD0CD4D2BD411AB7C00508BC7557C034BC024@sfmail3.looksmart.com>; from DZhuo@looksmart.net on Tue, Apr 30, 2002 at 01:38:21PM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, You really should ask this over on FreeBSD-questions@FreeBSD.org. That list is full of people who want to help with problems. On this list we discuss writing the documentation. Good luck! ==ml On Tue, Apr 30, 2002 at 01:38:21PM -0700, David Zhuo wrote: > Hi, > i am trying to install FreeBSD 4.5 from the ISO image downloaded from your > website. after resolving all conflicts, save and quit. i am suppose to jump > to the Sysinstall main menu but instead i got the following printed > endlessly to my screen: > > ahc1: Someone reset channel A > > what does that mean? and how to i fix this? > > david > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-doc" in the body of the message -- Michael Lucas mwlucas@FreeBSD.org, mwlucas@BlackHelicopters.org http://www.oreillynet.com/pub/q/Big_Scary_Daemons Absolute BSD: http://www.nostarch.com/abs_bsd.htm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 5:57: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id EEC4537B400 for ; Wed, 1 May 2002 05:57:00 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 172tfH-00085g-00 for ; Wed, 01 May 2002 13:56:59 +0100 Date: Wed, 1 May 2002 13:56:59 +0100 From: Daniel Bye To: freebsd-questions@FreeBSD.ORG Subject: Re: merging partitions Message-ID: <20020501125658.GA30863@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <000901c1f06a$343e6af0$0d00a8c0@alexus> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000901c1f06a$343e6af0$0d00a8c0@alexus> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tue, Apr 30, 2002 at 01:12:27PM -0400, alexus wrote: > is there a way to merge two partition into one? Yup, man ccd ccd allows you to contcatenate two or more existing file systems into one virtual file system. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6: 5:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id CC94B37B417 for ; Wed, 1 May 2002 06:05:19 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g41D5Wa08105; Wed, 1 May 2002 16:05:32 +0300 Message-Id: <200205011305.g41D5Wa08105@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 1 May 02 16:03:26 +0200 From: "Toomas Aas" Organization: Tartu City Government To: ecerejo@zapo.net, freebsd-questions@freebsd.org Date: Wed, 1 May 2002 16:03:24 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: How to enable IP Forwarding References: <20020430223634.B85537-100000@localhost> In-reply-to: <200205010234.45146.ecerejo@zapo.net> X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! > I have one NIC and I'm using a dialup connection. Here's the output: > > fxp0: flags=8802 mtu 1500 > ether 00:a0:c9:d9:7b:97 > media: Ethernet autoselect (none) > status: no carrier status: no carrier and media (none) means that your fxp0 interface thinks it is not connected to any network. Maybe you have bad cable? You need to fix this before you can get any further. Once that problem is solved, I *think* you need to assign a non-routable IP address to fxp0 and another address on the same network to your laptop. But I'll leave explaining the details to someone who has actually used FreeBSD to share PPP connection - I've never done it myself. -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * If you cannot change your mind, are you sure you have one? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:22: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from horkos.telenet-ops.be (horkos.telenet-ops.be [195.130.132.45]) by hub.freebsd.org (Postfix) with ESMTP id CFB0437B416 for ; Wed, 1 May 2002 06:21:58 -0700 (PDT) Received: from localhost (localhost.localdomain [127.0.0.1]) by horkos.telenet-ops.be (Postfix) with SMTP id 87D1B83C57 for ; Wed, 1 May 2002 15:21:53 +0200 (CEST) Received: from archipelagos.pandora.be (D5764052.kabel.telenet.be [213.118.64.82]) by horkos.telenet-ops.be (Postfix) with ESMTP id 3D74983DE9 for ; Wed, 1 May 2002 15:21:52 +0200 (CEST) Date: Wed, 1 May 2002 15:21:55 +0200 (CEST) From: la hache X-X-Sender: h@archipelagos.pandora.be To: questions@FreeBSD.org Subject: mail addy Message-ID: <20020501152121.M50996-100000@archipelagos.pandora.be> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG what does it take to get a 1337 @freebsd.org mail shell with great pine ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:29:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 06B4537B400 for ; Wed, 1 May 2002 06:29:19 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g41DQDU10209; Wed, 1 May 2002 09:26:14 -0400 Message-ID: <3CCFEE2A.5060302@potentialtech.com> Date: Wed, 01 May 2002 09:31:22 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Toomas Aas Cc: ecerejo@zapo.net, freebsd-questions@freebsd.org Subject: Re: How to enable IP Forwarding References: <20020430223634.B85537-100000@localhost> <200205011305.g41D5Wa08105@lv.raad.tartu.ee> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Toomas Aas wrote: > Hi! > > >>I have one NIC and I'm using a dialup connection. Here's the output: >> >>fxp0: flags=8802 mtu 1500 >> ether 00:a0:c9:d9:7b:97 >> media: Ethernet autoselect (none) >> status: no carrier >> > > status: no carrier and media (none) means that your fxp0 interface > thinks it is not connected to any network. Maybe you have bad cable? > You need to fix this before you can get any further. > > Once that problem is solved, I *think* you need to assign a > non-routable IP address to fxp0 and another address on the same > network to your laptop. But I'll leave explaining the details to > someone who has actually used FreeBSD to share PPP connection - I've > never done it myself. Yes. I suggest using 172.16.0.1 for the gateway and other 172.16.0.* addresses for any network clients. That range of IP addresses seems to be the least often used (in my experience) and often ISPs use private IPs for some of their routers and it can cause problems. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:37:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id F326F37B400 for ; Wed, 1 May 2002 06:37:16 -0700 (PDT) Received: from barbish ([63.70.155.105]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Wed, 1 May 2002 09:37:12 -0400 From: "Joe & Fhe Barbish" To: "hh" Cc: "FBSDQ" Subject: RE: ipfw Date: Wed, 1 May 2002 09:37:11 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20020501003745.6704ce9f.hh@dsgx.org> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The ipfw limit option is not in 4.4 it was just added to 4.5. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of hh Sent: Tuesday, April 30, 2002 8:38 PM To: freebsd-questions@freebsd.org Subject: ipfw at an machine 4.5-p2 i tried to use ipfw limit option and worked but on 4.4-p9 didn't .. do ipfw limit works only on 4.5 release ? or it's something missing on the 4.4 ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:39:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spin.web.net (spin.web.net [192.139.37.16]) by hub.freebsd.org (Postfix) with ESMTP id CECE437B400 for ; Wed, 1 May 2002 06:39:15 -0700 (PDT) Received: by spin.web.net (Postfix, from userid 1000) id 3E43312E547; Wed, 1 May 2002 09:39:15 -0400 (EDT) Date: Wed, 1 May 2002 09:39:15 -0400 From: Rob Ellis To: Darren Pilgrim Cc: freebsd-questions@freebsd.org Subject: Re: make install wrapper? Message-ID: <20020501133915.GB20305@web.ca> References: <3CCF2E1F.EEF74273@pantherdragon.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3CCF2E1F.EEF74273@pantherdragon.org> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG depending on the package you're installing, you could use gnu's "stow": http://www.gnu.ai.mit.edu/software/stow/stow.html basically, you install your package to something like /usr/local/stow/something-1.0 and then use stow to create symlinks to the right places. you can later install something-1.1 to /usr/local/stow/something-1.1, unstow the first version, stow the second version, and if there's any problem it's easy to back out. also easy to completely get rid of 1.0... - rob On Tue, Apr 30, 2002 at 04:51:59PM -0700, Darren Pilgrim wrote: > Is there a way to, or does anyone know of a (collection of) script(s) > that can take the makefile for a source package and build a second > script around it that backs up any files that will be overwritten before > installing the compiled package, create an uninstall script if one isn't > present, and handles restoration of the old files after an uninstall? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Rob Ellis System Administrator, Web Networks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:42:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id 85AC837B405 for ; Wed, 1 May 2002 06:42:24 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g41DgtU08471; Wed, 1 May 2002 16:42:55 +0300 Message-Id: <200205011342.g41DgtU08471@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 1 May 02 16:40:31 +0200 From: "Toomas Aas" Organization: Tartu City Government To: "Aaron Burke" , freebsd-questions@freebsd.org Date: Wed, 1 May 2002 16:40:27 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: Update from 4.4-release to 4.5-stable question. In-reply-to: References: X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Oh yeah, forgot to mention the big part of the problem. > (Please forgive my ignorance.) > alpha# cd /sys/i386/conf/ > alpha# config alpha > ERROR: version of config(8) does not match kernel! I am by no means an expert on multi-platform support of FreeBSD, but I strongly suspect that if you have Alpha system then you have nothing to do in sys/i386 directory. -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * If Windows sucked, it would be good for something. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 6:45:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx9.airmail.net (mx9.airmail.net [209.196.77.106]) by hub.freebsd.org (Postfix) with ESMTP id 6587337B404 for ; Wed, 1 May 2002 06:45:06 -0700 (PDT) Received: from mail3.iadfw.net ([209.196.123.3]) by mx9.airmail.net with smtp (Exim 3.33 #1) id 172uPp-000CK3-00; Wed, 01 May 2002 08:45:05 -0500 Received: from station1 from [209.144.230.1] by mail3.iadfw.net (/\##/\ Smail3.1.30.16 #30.61) with smtp for sender: id ; Wed, 1 May 2002 08:45:45 -0500 (CDT) Message-ID: <03af01c1f116$7a7f6b70$0100a8c0@station1> From: "Joe Gwozdecki" To: "yacine mihoubi" , References: <20020501115635.27714.qmail@web10407.mail.yahoo.com> Subject: Re: Date: Wed, 1 May 2002 08:45:37 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Vous avez posé une question que je ne sais pas répondre à. Je suis nouvel à FreeBSD me. Cependant, il y a la documentation en français, disponible pour FreeBSD. Je le regarderais et va de là-bas. Ne que vous voulez pas faire est très difficile. Meilleurs salutations, > > j'ai créer un logiciel et j'ai conserver dans un > cdrom et > souhaite vender ce cdrom dans votre pays > quel sont les demarches a suivre > > ___________________________________________________________ > Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! > Yahoo! Mail : http://fr.mail.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 7:15:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 1FA8437B416 for ; Wed, 1 May 2002 07:15:49 -0700 (PDT) Received: from barbish ([63.70.155.105]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Wed, 1 May 2002 10:15:48 -0400 From: "Joe & Fhe Barbish" To: "FBSDQ" Cc: Subject: RE: How to enable IP Forwarding Date: Wed, 1 May 2002 10:15:45 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <3CCFEE2A.5060302@potentialtech.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you are cabling your FBSD box straight to your laptop with out going through a hub or switch you can not use a standard cable. You have to use an crossover cable. This may be why your FBSD Nic thinks it's not connected. This problem has nothing to do with IP forwarding. Posting more info would help a lot. Post contents of your /etc/rc.conf and /var/run/dmesg.boot Another cause is All Nic cards must have it's own unique IRQ. By this I mean the Nic card can not be sharing an IRQ number at the PC bios level. Check the PC post summary status display to verify the Nic card is not sharing it's IRQ with an other device. If it is, you can some times correct this by making sure the Nic card is not in the first or last PCI expansion slots. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Bill Moran Sent: Wednesday, May 01, 2002 9:31 AM To: Toomas Aas Cc: ecerejo@zapo.net; freebsd-questions@freebsd.org Subject: Re: How to enable IP Forwarding Toomas Aas wrote: > Hi! > > >>I have one NIC and I'm using a dialup connection. Here's the output: >> >>fxp0: flags=8802 mtu 1500 >> ether 00:a0:c9:d9:7b:97 >> media: Ethernet autoselect (none) >> status: no carrier >> > > status: no carrier and media (none) means that your fxp0 interface > thinks it is not connected to any network. Maybe you have bad cable? > You need to fix this before you can get any further. > > Once that problem is solved, I *think* you need to assign a > non-routable IP address to fxp0 and another address on the same > network to your laptop. But I'll leave explaining the details to > someone who has actually used FreeBSD to share PPP connection - I've > never done it myself. Yes. I suggest using 172.16.0.1 for the gateway and other 172.16.0.* addresses for any network clients. That range of IP addresses seems to be the least often used (in my experience) and often ISPs use private IPs for some of their routers and it can cause problems. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 7:45: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.kibserv.org (ns1.kibserv.org [216.27.132.20]) by hub.freebsd.org (Postfix) with ESMTP id 4CDED37B416 for ; Wed, 1 May 2002 07:44:57 -0700 (PDT) Received: from ns1 (seti.kibserv.org [216.27.132.21]) by mail.kibserv.org (8.11.3/8.11.3) with SMTP id g41Ei8901951 for ; Wed, 1 May 2002 14:44:09 GMT (envelope-from freebsdlist@kibserv.org) Message-ID: <000501c1f11e$b1315e00$15841bd8@kibserv.org> Reply-To: "Jason Cribbins" From: "Jason Cribbins" To: Subject: /etc/exports reads only first line Date: Wed, 1 May 2002 10:44:25 -0400 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am sure this is a simple thing but can anyone tell me why mountd reads only the first line of my /etc/exports file? I current have two lines /usr/local/www/data/webmail -mapall=daemon toaster.kibserv.org /usr/src /usr/obj -maproot=root mail.kibserv.org www.kibserv.org ftp.kibserv.org mail.kibserv.org toaster.kibserv.org The had the lines revered before when I was upgrading my machines. but in order to mount webmail for a new qmail toaster I am making I had to make that export the top line before it would let it mount properly. Any Ideas? -Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 7:48:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id E7C0337B400 for ; Wed, 1 May 2002 07:48:53 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 172vPT-000Cqo-00; Wed, 01 May 2002 15:48:47 +0100 Date: Wed, 1 May 2002 15:48:47 +0100 From: Ceri Davies To: Jason Cribbins Cc: questions@freebsd.org Subject: Re: /etc/exports reads only first line Message-ID: <20020501144847.GA36081@submonkey.net> Mail-Followup-To: Ceri Davies , Jason Cribbins , questions@freebsd.org References: <000501c1f11e$b1315e00$15841bd8@kibserv.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000501c1f11e$b1315e00$15841bd8@kibserv.org> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 10:44:25AM -0400, Jason Cribbins wrote: > I am sure this is a simple thing > but can anyone tell me why mountd reads only the first line of my > /etc/exports file? > > I current have two lines > /usr/local/www/data/webmail -mapall=daemon toaster.kibserv.org > /usr/src /usr/obj -maproot=root mail.kibserv.org www.kibserv.org > ftp.kibserv.org mail.kibserv.org toaster.kibserv.org Are /usr/sr, /usr/obj and /usr/local/www/data/webmail all on the same filesystem ? If so, that's your reason, but as for a fix, I don't know. Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 7:50:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 3690737B41C for ; Wed, 1 May 2002 07:50:05 -0700 (PDT) Received: from dan.emsphone.com (smmsp@localhost [127.0.0.1]) by dan.emsphone.com (8.12.2/8.12.3) with ESMTP id g41Eo42Z010844; Wed, 1 May 2002 09:50:04 -0500 (CDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.2/Submit) id g41Eo4i6010843; Wed, 1 May 2002 09:50:04 -0500 (CDT) Date: Wed, 1 May 2002 09:50:04 -0500 From: Dan Nelson To: Jason Cribbins Cc: questions@FreeBSD.ORG Subject: Re: /etc/exports reads only first line Message-ID: <20020501145004.GE78460@dan.emsphone.com> References: <000501c1f11e$b1315e00$15841bd8@kibserv.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000501c1f11e$b1315e00$15841bd8@kibserv.org> User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (May 01), Jason Cribbins said: > I am sure this is a simple thing > but can anyone tell me why mountd reads only the first line of my > /etc/exports file? > > I current have two lines > /usr/local/www/data/webmail -mapall=daemon toaster.kibserv.org > /usr/src /usr/obj -maproot=root mail.kibserv.org www.kibserv.org ftp.kibserv.org mail.kibserv.org toaster.kibserv.org Are /usr/local/www/data/webmail and /usr/src separate filesystems? You can only have one export line per host per filesystem. toaster.kibserv.org is listed on both lines. > The had the lines revered before when I was upgrading my machines. but in > order to mount webmail for a new qmail toaster I am making I had to make > that export the top line before it would let it mount properly. -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 7:53:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from otter.mills-atl.com (dsl-64-192-140-77.telocity.com [64.192.140.77]) by hub.freebsd.org (Postfix) with ESMTP id 0707637B41B; Wed, 1 May 2002 07:53:16 -0700 (PDT) Received: from localhost (jmills@localhost) by otter.mills-atl.com (8.9.3/8.9.3) with ESMTP id KAA01765; Wed, 1 May 2002 10:56:06 -0400 X-Authentication-Warning: otter.mills-atl.com: jmills owned process doing -bs Date: Wed, 1 May 2002 10:56:06 -0400 (EDT) From: John Mills X-Sender: jmills@otter.mills-atl.com Reply-To: John Mills To: FreeBSD-questions Cc: "Greg 'groggy' Lehey" Subject: NewbieQ on Update (Was: Re: FreeBSD patch level) In-Reply-To: <20020501120505.J75614@wantadilla.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello - I am going through my first kernel building exercise and would appreciate confirmation or redirection. On Wed, 1 May 2002, Greg 'groggy' Lehey wrote: > There's no such thing. You're trying to apply Linux terminology to > FreeBSD. We don't "patch", we update. A RELEASE is just that, a > release, and so it stays the way it is. In the meantime, fixes get > applied to the STABLE branch in the CVS tree. This is all described > in the handbook. I installed FreeBSD-4.5 from 'RELEASE' CDs I made. I am happy with the setup and functionality I got in a _very_ modest (quaint, even) platform: Cyrix-133[?] with 16MBy RAM, c. 3GBy HDD, old CD. This is a 'learner' box, not mission-critical. Now I want to be sure I have a "reasonable" set of fixes, especially security fixes. I used 'cvsup' and the 'standard-supfile' to pull a RELENG_4_5 fileset. Running 'make world' was about a 7-hour project, not counting a number of aborts apparently due to overheating. It finally ran to completion when I took the cover off the box. Time to add more ventilation and move all those cables _away_ from the RAM! My next step is presumably the kernel. My first question is, was this a good tag to achieve what I wanted, or should I have used RELENG_4 (or something else)? My second question is, if I do change to RELENG_4 ("Stable", if I understand), will my system be dramatically different from what I got with 4.5 RELEASE, or what I'll get with RELENG_4_5 ? I've noticed only one peculiarity in my current installation: the HDDs on my primary IDE are found and work properly by interupt, but for some reason the CDROM drive on the secondary is seen as "PIO" - these controllers have IRQs 14 and 15 respectively, according to the BIOS's startup log. My third question is: should this be a kernel configuration issue, a startup configuration issue, or some type of passed parameter at boot? I plan to walk through the steps (including some backups) outlined in the Handbook and the FreeBSD Reference (Thanks, Greg.), but a bit of hand-holding would be appreciated. TIA. - John Mills To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8: 6: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.simrad.no (mail.simrad.no [193.69.73.2]) by hub.freebsd.org (Postfix) with ESMTP id 06F5737B416 for ; Wed, 1 May 2002 08:06:02 -0700 (PDT) To: wblock@wonkity.com Cc: chip.wiegand@simrad.com, freebsd-questions@FreeBSD.ORG Subject: Re: sane & scanner problem MIME-Version: 1.0 X-Mailer: Lotus Notes Build M11_11052001 Beta 4 November 05, 2001 Message-ID: From: chip.wiegand@simrad.com Date: Wed, 1 May 2002 08:06:33 -0700 X-MIMETrack: Serialize by Router on S_INET01/S_EXT(Release 5.0.6a |January 17, 2001) at 01.05.2002 17:06:38, Serialize complete at 01.05.2002 17:06:38 Content-Type: text/plain; charset="US-ASCII" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Warren Block wrote on 04/29/2002 04:49:45 PM: > On Mon, 29 Apr 2002 chip.wiegand@simrad.com wrote: > > > I have an HP scanner that is supported by Sane, connected by USB to > > my FBSD-4.5R box. I installed sane-frontends and sane-backends and > > xsane. When I run gimp - menu item Extns/Acquire Image/Settings, I > > get a message on the screen 'xcanimage: no scanners were identified. > > If you were expecting something differant check to make sure the > > scanner is plugged in, turned on and detected by sane-find-scanner > > (if appropriate)...' I ran sane-find-scanner as root and it finds, > > but doesn't identify, the scanner on uscanner0. How do I get it to > > identify my scanner so it can be used? > > cd to /usr/local/etc/sane.d and look at hp.conf. You'll probably need > to add > > usb /dev/uscanner0 > > to that file. > > -Warren Block * Rapid City, South Dakota USA Okay, so I've done that and I still get the same error message. I didn't restart X or fbsd though, do I need to? I installed xsane and it also reports no devices found. -- chip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:15: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from trot.galis.org (ool-18bdd4e6.dyn.optonline.net [24.189.212.230]) by hub.freebsd.org (Postfix) with ESMTP id 2C4F337B416 for ; Wed, 1 May 2002 08:15:04 -0700 (PDT) Received: (from gx@localhost) by trot.galis.org (8.11.6/8.11.6) id g41FHKS26497; Wed, 1 May 2002 11:17:20 -0400 Date: Wed, 1 May 2002 11:17:19 -0400 From: George Georgalis To: nylug-talk@nylug.org, kplug-list@kernel-panic.org, freebsd-questions@FreeBSD.ORG Subject: using sftp Message-ID: <20020501111719.E14367@trot.haven.dom> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG does anyone know of an sftp front-end? Something to handle tab completion, recursive commands, etc? Thanks, // George -- GEORGE GEORGALIS, System Admin/Architect cell: 347-451-8229 Security Services, Web, Mail, mailto:george@galis.org File, Print, DB and DNS Servers. http://www.galis.org/george To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:15:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from swansea.cableinet.net (swansea.cableinet.net [194.117.135.69]) by hub.freebsd.org (Postfix) with ESMTP id 399F637B41A for ; Wed, 1 May 2002 08:15:44 -0700 (PDT) Received: by swansea.cableinet.net (Postfix, from userid 1001) id 1972C1AC1F7; Wed, 1 May 2002 16:15:30 +0100 (BST) Date: Wed, 1 May 2002 16:15:29 +0100 From: Burhan Nazir To: freebsd-questions@freebsd.org Subject: Re: OK, what the fsck is this? X installation... Message-ID: <20020501151529.GA66173@swansea.cableinet.net> References: <20020501023812.A37800@Deadcell.ant> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020501023812.A37800@Deadcell.ant> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Andreas Ntaflos wrote: > Really bad formatting, sorry. Hope it is still somehow readable. > What the hell is this ucs2any thing? What has it got to do with > anything? I can do whatever I want, this does not go away. Perhaps > it has something to do with the following error I got before the > whole thing got out of control: > > /usr/bin/install -c -m 0755 xon.sh /usr/X11R6/bin/xon > install in programs/scripts done > installing in programs/glxinfo... > rm -f glxinfo > LD_LIBRARY_PATH=../../exports/lib cc -o glxinfo -ansi -pedantic -Dasm=__asm -Wall -Wpointer-arith > -L../../exports/lib glxinfo.o -lGLU -lGL -lXext -lX11 -L/usr/X11R6/lib -pthread -lm -Wl,-rpath, > /usr/X11R6/lib > /usr/libexec/elf/ld: cannot find -lGLU > *** Error code 1 > > Stop in /usr/ports/x11/XFree86-4-clients/work/xc/programs/glxinfo. > *** Error code 1 I got this exact same problem just a few hours ago. I did a portupgrade on XFree86, it started compiling but then died with the above error. However, I was more lucky because portupgrade realised an error occured and duly reinstalled the backed up version of XFree86-4.1. Don't know what's up with -lGLU, but I hope it gets fixed soon. -Burhan -- FreeBSD 4.5-RELEASE-p4 | http://www.freebsd.org 4:11PM up 1 day, 1:42, 7 users, load averages: 0.00, 0.01, 0.03 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:16:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from vortex.wa4phy.net (pcp01578012pcs.martnz01.ga.comcast.net [68.47.4.97]) by hub.freebsd.org (Postfix) with ESMTP id B125A37B41A for ; Wed, 1 May 2002 08:16:53 -0700 (PDT) Received: from vortex.wa4phy.net (localhost.wa4phy.net [127.0.0.1]) by vortex.wa4phy.net (8.11.6/8.11.6) with ESMTP id g41FGp116968 for ; Wed, 1 May 2002 11:16:52 -0400 (EDT) (envelope-from sam@wa4phy.net) Message-ID: <3CD006E2.C90C40D3@vortex.wa4phy.net> Date: Wed, 01 May 2002 11:16:51 -0400 From: Sam Drinkard Organization: You Gotta Be Kiddin! X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.5-STABLE i386) X-Accept-Language: en, ja MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Sendmail & hash.db Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm playing with trying to block some spam crap, slowly adding the hosts/ip's of the offenders. I read thru the textual stuff about spam control, but either I missed something or its not mentioned, but after rebuilding the access.db file, is it necessary to restart the sendmail daemon, or will it pick up the changes to the access.db without a kill -1? Am not currently subscribed, but I will check the list later.. of course, a CC: would be appreciated as well. Thanks.. Sam To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:19:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu04.email.msn.com (cpimssmtpu04.email.msn.com [207.46.181.80]) by hub.freebsd.org (Postfix) with ESMTP id D654637B404 for ; Wed, 1 May 2002 08:19:51 -0700 (PDT) Received: from thebe ([67.24.59.156]) by cpimssmtpu04.email.msn.com with Microsoft SMTPSVC(5.0.2195.4905); Wed, 1 May 2002 08:19:14 -0700 From: "Aaron Burke" To: "FreeBSD-Questions" , "Toomas Aas" Subject: RE: Update from 4.4-release to 4.5-stable question. Date: Wed, 1 May 2002 08:19:25 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: <200205011342.g41DgtU08471@lv.raad.tartu.ee> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-OriginalArrivalTime: 01 May 2002 15:19:15.0465 (UTC) FILETIME=[8E2E8F90:01C1F123] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sorry about the Alpha name. It is a DNS name only. The box is actually a Pentuim 233-mmx on an intel i430tx chipset. Sorry about any confusion. I just finished the update to FreeBSD 4.5-Stable. Everything has gone ok, which is fantastic news. Thank everyone for the help. Especially Ian Barnes. > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Toomas Aas > Sent: Wednesday, May 01, 2002 06:40 AM > To: Aaron Burke; freebsd-questions@FreeBSD.ORG > Subject: RE: Update from 4.4-release to 4.5-stable question. > > > > > Oh yeah, forgot to mention the big part of the problem. > > (Please forgive my ignorance.) > > alpha# cd /sys/i386/conf/ > > alpha# config alpha > > ERROR: version of config(8) does not match kernel! > > I am by no means an expert on multi-platform support of FreeBSD, but > I strongly suspect that if you have Alpha system then you have > nothing to do in sys/i386 directory. > -- > Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ > * If Windows sucked, it would be good for something. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:30:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sudz.ns3g.com (CPE0080c6f29e4f.cpe.net.cable.rogers.com [24.43.67.29]) by hub.freebsd.org (Postfix) with ESMTP id 2FB6837B416 for ; Wed, 1 May 2002 08:30:39 -0700 (PDT) Received: from COOLER (CPE00e029860b4d.cpe.net.cable.rogers.com [24.42.29.172]) by sudz.ns3g.com (8.12.2/8.12.2) with SMTP id g41Fc1Ns026927; Wed, 1 May 2002 11:38:01 -0400 (EDT) (envelope-from sudz@ns3g.com) Reply-To: From: "Colin Legendre" To: "hh" , Subject: RE: see this . Date: Wed, 1 May 2002 11:35:17 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20020501024051.42e9f1b9.hh@dsgx.org> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Did you only CVSUP or did you also make world after? Simply cvsup does not update ipfw, you also need to rebuild the world and your kernel after. Colin Legendre CCNP, MCP sudz@ns3g.com http://www.ns3g.com -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of hh Sent: Tuesday, April 30, 2002 10:41 PM To: freebsd-questions@FreeBSD.ORG Subject: see this . i made cvsup so i could get the latest version of ipfw .. so i could use the limit option but guess some# man ipfw |grep limit These dynamic rules, which have a limited lifetime, are checked at the limitation using WF2Q). ging limit rather than net.inet.ip.fw.verbose_limit, where the value ``0'' removes the logging limit. Logging may then be re- Console logging and the log limit are adjustable dynamically limited to the bits which are set in the mask. and the length of the port list is limited to IP_FW_MAX_PORTS same protocol. The rule has a limited lifetime (con- A value of 0 (default) means unlimited bandwidth. The unit must Maximum number of dynamic rules. When you hit this limit, no A first and efficient way to limit access (not using dynamic rules) is To limit the number of connections a user can open you can use the fol- ipfw add allow tcp from my-net/24 to any setup limit src-addr 10 -> ipfw add allow tcp from any to me setup limit src-addr 4 such attacks can be partially limited by acting on a set of sysctl(8) We can use pipes to artificially limit bandwidth, e.g. on a machine act- ing as a router, if we want to limit traffic from local clients on Should we like to simulate a bidirectional link with bandwidth limita- connection often becomes a limiting factor much more than bandwidth: all traffic. Because the pipes have no limitations, the only effect is A more sophisticated example is limiting the outbound traffic on a net with per-host limits, rather than per-network limits: that's the option im try 1.1.1.1 -> i changed because i didn't wanna tell my real addr .. oh well u guys can understand and im running in 4.4-RELEASE-p9 i updated the src .. probably is 4.5p4 now .. and on the another machine is an 4.5p2 .. and this same commands works .. how should i proceed ? the only way is to build/install world .. and recompile kernel and reboot ? thx for your time some# ipfw add allow tcp from any to 1.1.1.1 80 limit src-addr 20 ipfw: error: unknown argument ``limit'' .. and bellow here show me all the help of ipfw .. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:35:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.naseej.com.sa (smtp.naseej.com.sa [212.100.193.67]) by hub.freebsd.org (Postfix) with ESMTP id 5E16B37B405 for ; Wed, 1 May 2002 08:35:09 -0700 (PDT) Received: from FUZZY (unverified [212.100.193.180]) by mail.naseej.com.sa (Vircom SMTPRS 4.6.189) with SMTP id for ; Wed, 1 May 2002 18:31:22 +0300 From: "Sulaiman A. Mirdad" To: Subject: Web server flood control? Date: Wed, 1 May 2002 18:34:49 +0300 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am hosting a forums web site that contains none main stream ideas. The result is that I a number of individuals have started flooding my web server. I searched the web for a solution but was not successful. I would greatly appreciate it if you can let me know if you know of a solution. Regards, - Sam Mirdad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:43: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from stella.pyramus.com (stella.pyramus.com [206.129.206.3]) by hub.freebsd.org (Postfix) with ESMTP id 4BC3D37B428 for ; Wed, 1 May 2002 08:42:49 -0700 (PDT) Received: from pyramus.com (dark-star.pyramus.com [206.129.206.6]) by stella.pyramus.com (8.11.6/8.9.3) with ESMTP id g41FlDm85101 for ; Wed, 1 May 2002 08:47:14 -0700 (PDT) (envelope-from blake@pyramus.com) Message-ID: <3CD00EC3.A1689CF5@pyramus.com> Date: Wed, 01 May 2002 08:50:27 -0700 From: Blake Swensen X-Mailer: Mozilla 4.74 [en]C-DIAL (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-questions@FreeBSD.ORG Subject: Re: virtusertable References: <200205011138.g41BcUr54531@router.darlow.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yeah... What we do in this situation is to create both a virtual user AND an alias. virtual user: sales@virtualdomain.com vsales Aliases vsales: tom,frank,chester@aol.com,sally Peace, Blake Neil Darlow wrote: > > On 05/01/2002 at 02:19:14, Ian Barnes said: > > in my virtusertable file i would like it that when an email is sent to a > > specific email address, it should be delivered to a few local accounts. > > > > how do i set that up, would i just add each user in the file, separated by > > commas or semi-colons ? > > The usefulness of /etc/mail/virtusertable is in translating e-mail addresses > from one format to another, e.g. delivering wildcarded domain addresses to > multiple local mailboxes. > > Although what you describe can be done using virtusertable, this is a good > example for the use of /etc/mail/aliases. > > Look at /etc/mail/aliases for the required syntax. You can put multiple names > on the right-hand-side of an alias separated by a space. Placing a comma > after a name on the right-hand-side of an alias prevents that entry being > parsed as an alias itself. > > Regards, > Neil Darlow M.Sc. > -- > 1024D/531F9048 1999-09-11 Neil Darlow > GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 8:48: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 9AB0137B400 for ; Wed, 1 May 2002 08:47:58 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g41FlIU13219; Wed, 1 May 2002 11:47:19 -0400 Message-ID: <3CD00F3B.9060300@potentialtech.com> Date: Wed, 01 May 2002 11:52:27 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: "Sulaiman A. Mirdad" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Web server flood control? References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sulaiman A. Mirdad wrote: > > I am hosting a forums web site that contains none main stream ideas. The > result is that I a number of individuals have started flooding my web > server. > > I searched the web for a solution but was not successful. I would greatly > appreciate it if you can let me know if you know of a solution. Sure, spend more money, that always helps. You can't seriously think that anyone on this list can be of any help to you with as little information as you've provided? Depending on exactly which aspect of this "flooding" is bothering you will determine what kind of solution you need to take. If the server is overwhelmed, get a faster one. If the connection is full, get more bandwidth. If people are spamming the system, implement some sort of filters. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 9:19:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailbox.openface.ca (mailbox.openface.ca [216.46.1.2]) by hub.freebsd.org (Postfix) with ESMTP id 333C637B416 for ; Wed, 1 May 2002 09:19:11 -0700 (PDT) Received: from Bakounine.alternatives.ca (www.cmaq.net [216.46.17.231]) by mailbox.openface.ca (8.11.6/8.11.6) with ESMTP id g41GJ5g05101 for ; Wed, 1 May 2002 12:19:05 -0400 (EDT) Received: from sebas by Bakounine.alternatives.ca with local (Exim 3.34 #1 (Debian)) id 172wsy-0002Sg-00 for ; Wed, 01 May 2002 12:23:20 -0400 Date: Wed, 1 May 2002 12:23:20 -0400 From: sebas-listes@iquebec.com To: questions@freebsd.org Subject: make buildworld stops upgrade from 4.5 to stable. Message-ID: <20020501162319.GA9135@Bakounine.alternatives.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm trying to upgrade from 4.5 release to stable. Everything in my etc/make.conf is commented out. But it stops after sometimes with these lines.... ----------------------------------------------- ===> etc/sendmail rm -f freebsd.cf (cd /usr/src/etc/sendmail && m4 -D_CF_DIR_=/usr/src/etc/sendmail/../../contrib/sendmail/cf/ /usr/src/etc/sendmail/../../contrib/sendmail/cf/m4/cf.m4 freebsd.mc) > freebsd.cf chmod 444 freebsd.cf --------------------------------------------- Is there something special that needs to be done? Why is stopping? Thank you. Sebastien To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 9:29:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from maile.telia.com (maile.telia.com [194.22.190.16]) by hub.freebsd.org (Postfix) with ESMTP id 10FDB37B417 for ; Wed, 1 May 2002 09:29:40 -0700 (PDT) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by maile.telia.com (8.11.6/8.11.6) with ESMTP id g41GTci01966 for ; Wed, 1 May 2002 18:29:38 +0200 (CEST) Received: from falcon.midgard.homeip.net (h53n2fls20o913.telia.com [212.181.163.53]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id SAA12992 for ; Wed, 1 May 2002 18:29:32 +0200 (CEST) Received: (qmail 67704 invoked by uid 1001); 1 May 2002 16:29:28 -0000 Date: Wed, 1 May 2002 18:29:28 +0200 From: Erik Trulsson To: sebas-listes@iquebec.com Cc: questions@freebsd.org Subject: Re: make buildworld stops upgrade from 4.5 to stable. Message-ID: <20020501162928.GA64846@student.uu.se> Mail-Followup-To: sebas-listes@iquebec.com, questions@freebsd.org References: <20020501162319.GA9135@Bakounine.alternatives.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020501162319.GA9135@Bakounine.alternatives.ca> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 12:23:20PM -0400, sebas-listes@iquebec.com wrote: > Hi, > > I'm trying to upgrade from 4.5 release to stable. Everything in my > etc/make.conf is commented out. > > But it stops after sometimes with these lines.... > ----------------------------------------------- > ===> etc/sendmail > rm -f freebsd.cf > (cd /usr/src/etc/sendmail && m4 > -D_CF_DIR_=/usr/src/etc/sendmail/../../contrib/sendmail/cf/ > /usr/src/etc/sendmail/../../contrib/sendmail/cf/m4/cf.m4 freebsd.mc) > > freebsd.cf > chmod 444 freebsd.cf > > > --------------------------------------------- > > Is there something special that needs to be done? Why is stopping? It is stopping because it is finished building the world. Those lines are usually the last ones printed in a buildworld. What did you expect to happen afterwards? You still have to build and install a new kernel and install the newly built world. See /usr/src/UPDATING or the handbook for details. -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 9:34:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from surreal.nl (surreal.nl [212.204.236.10]) by hub.freebsd.org (Postfix) with ESMTP id E93DE37B41A for ; Wed, 1 May 2002 09:34:22 -0700 (PDT) Received: from vscan (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 5AD374FE for ; Wed, 1 May 2002 18:34:22 +0200 (CEST) Received: by surreal.nl (Postfix, from userid 1000) id 9586B4F5; Wed, 1 May 2002 18:34:21 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 929AB469 for ; Wed, 1 May 2002 18:34:21 +0200 (CEST) Date: Wed, 1 May 2002 18:34:21 +0200 (CEST) From: Walter Hop To: FreeBSD Questions Subject: php4_4.2.0 broken, how to get an older port? Message-ID: <20020501183038.L96939-100000@surreal.nl> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by surreal.binity.net (amavis-perl-11-sky2) for freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, after CVSuping the ports tree and updating php4_4.1.2 to php4_4.2.0 I started to experience weird segfaults in the php interpreter (among others when using the mkdir() function), this happened on several machines running php4_4.2.0 ... Now I really need to rollback to php4_4.1.2, I've saved a tarball but unfortunately I need to change make options so I can't use packages... Is there a place where you can get older versions of ports? thanks.. walter -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 9:45: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id C908737B400 for ; Wed, 1 May 2002 09:45:03 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g41Gj0U14596; Wed, 1 May 2002 12:45:00 -0400 Message-ID: <3CD01CC1.3000902@potentialtech.com> Date: Wed, 01 May 2002 12:50:09 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: Walter Hop Cc: FreeBSD Questions Subject: Re: php4_4.2.0 broken, how to get an older port? References: <20020501183038.L96939-100000@surreal.nl> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Walter Hop wrote: > Hi all, > > after CVSuping the ports tree and updating php4_4.1.2 to php4_4.2.0 I > started to experience weird segfaults in the php interpreter (among > others when using the mkdir() function), this happened on several > machines running php4_4.2.0 ... > > Now I really need to rollback to php4_4.1.2, I've saved a tarball but > unfortunately I need to change make options so I can't use packages... > > Is there a place where you can get older versions of ports? Look through the CVS logs and find out what date that port was updated, then use cvsup with the date= option to get that exact version of the ports tree ... for example, if you want the ports tree from Jan 1 , 2002, you'd put this in your supfile *default date=2002.01.01.00.00.00 and it wouldn't get anything newer than that. You could change your supfile to only update the www section, thus speeding things up and not regressing your entire ports tree. This could cause problems with dependencies though, so use with care. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 9:47: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.kibserv.org (ns1.kibserv.org [216.27.132.20]) by hub.freebsd.org (Postfix) with ESMTP id 65C7B37B400 for ; Wed, 1 May 2002 09:46:57 -0700 (PDT) Received: from ns1 (seti.kibserv.org [216.27.132.21]) by mail.kibserv.org (8.11.3/8.11.3) with SMTP id g41Gk7902245; Wed, 1 May 2002 16:46:08 GMT (envelope-from freebsdlist@kibserv.org) Message-ID: <003701c1f12f$b8d4df40$15841bd8@kibserv.org> Reply-To: "Jason Cribbins" From: "Jason Cribbins" To: "Dan Nelson" Cc: References: <000501c1f11e$b1315e00$15841bd8@kibserv.org> <20020501145004.GE78460@dan.emsphone.com> Subject: Re: /etc/exports reads only first line Date: Wed, 1 May 2002 12:46:19 -0400 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well that explains it. Everything I plan to export is mounted on /usr. What you are saying is that I have to create a separate slice for webmail that is not on the same mount as src and obj? So I will either have to open up webmail to the other machines (possible security risk) or stop exporting the /src and /obj once I get everyone upgraded. There has to be a better way to do business here. -Jason ----- Original Message ----- From: "Dan Nelson" To: "Jason Cribbins" Cc: Sent: Wednesday, May 01, 2002 10:50 AM Subject: Re: /etc/exports reads only first line : In the last episode (May 01), Jason Cribbins said: : > I am sure this is a simple thing : > but can anyone tell me why mountd reads only the first line of my : > /etc/exports file? : > : > I current have two lines : > /usr/local/www/data/webmail -mapall=daemon toaster.kibserv.org : > /usr/src /usr/obj -maproot=root mail.kibserv.org www.kibserv.org ftp.kibserv.org mail.kibserv.org toaster.kibserv.org : : Are /usr/local/www/data/webmail and /usr/src separate filesystems? You : can only have one export line per host per filesystem. : toaster.kibserv.org is listed on both lines. : : > The had the lines revered before when I was upgrading my machines. but in : > order to mount webmail for a new qmail toaster I am making I had to make : > that export the top line before it would let it mount properly. : : -- : Dan Nelson : dnelson@allantgroup.com : : To Unsubscribe: send mail to majordomo@FreeBSD.org : with "unsubscribe freebsd-questions" in the body of the message : To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 10:15:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail9.datapipe.com (mail9.datapipe.com [64.27.65.28]) by hub.freebsd.org (Postfix) with ESMTP id 8F29337B416 for ; Wed, 1 May 2002 10:15:48 -0700 (PDT) Received: from 0019305937 [66.56.220.72] by mail9.datapipe.com (SMTPD32-7.07) id A2C37AE0094; Wed, 01 May 2002 13:15:47 -0400 From: Venue News To: Subject: You have a virtual card waiting for you! Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Reply-To: news@venuecom.com X-Mailer: Vista NetMail 3.01 Free Edition (http://www.internet-soft.com/net/) Message-Id: <200205011315871.SM01300@0019305937> Date: Wed, 1 May 2002 13:15:48 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi - I found your email on this site thought you would appreciate this card: http://freebsd.enderunix.org/handbook/eresources-news.html Scott has created a Virtual Post Card just for you! To pick up your card, simply point your browser at the page listed below. http://www.venuecom.com/cards/apr29-104653844.htm The card will remain on the server for about one month, so please print it out or save it as soon as you can. If the page above does not appear as a link, copy and paste it to your browser's address field. -- Venue Communications Web Site Design, Hosting, Domain Names, and Web Marketing Phone: 910-617-7634 Toll Free: 866-VENUE-01 Fax: 770-234-6783 Toll Free Fax: 866-VENUE-02 Website: http://www.venuecommunications.com To remove your name from our servers reply with the word Remove in the subject. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 10:20:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail9.datapipe.com (mail9.datapipe.com [64.27.65.28]) by hub.freebsd.org (Postfix) with ESMTP id C5D1737B41D for ; Wed, 1 May 2002 10:20:23 -0700 (PDT) Received: from 0019305937 [66.56.220.72] by mail9.datapipe.com (SMTPD32-7.07) id A3D67AE0094; Wed, 01 May 2002 13:20:22 -0400 From: Venue News To: Subject: You have a virtual card waiting for you! Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Reply-To: news@venuecom.com X-Mailer: Vista NetMail 3.01 Free Edition (http://www.internet-soft.com/net/) Message-Id: <200205011320993.SM01300@0019305937> Date: Wed, 1 May 2002 13:20:31 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi - I found your email on this site thought you would appreciate this card: http://freebsd.enderunix.org/mailto.html Scott has created a Virtual Post Card just for you! To pick up your card, simply point your browser at the page listed below. http://www.venuecom.com/cards/apr29-104653844.htm The card will remain on the server for about one month, so please print it out or save it as soon as you can. If the page above does not appear as a link, copy and paste it to your browser's address field. -- Venue Communications Web Site Design, Hosting, Domain Names, and Web Marketing Phone: 910-617-7634 Toll Free: 866-VENUE-01 Fax: 770-234-6783 Toll Free Fax: 866-VENUE-02 Website: http://www.venuecommunications.com To remove your name from our servers reply with the word Remove in the subject. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 10:21:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from c001.snv.cp.net (h031.c001.snv.cp.net [209.228.32.141]) by hub.freebsd.org (Postfix) with SMTP id B611937B405 for ; Wed, 1 May 2002 10:20:49 -0700 (PDT) Received: (cpmta 9971 invoked from network); 1 May 2002 10:20:48 -0700 Received: from 209.228.32.116 (HELO mail.atkinshome.com.criticalpath.net) by smtp.register-admin.com (209.228.32.141) with SMTP; 1 May 2002 10:20:48 -0700 X-Sent: 1 May 2002 17:20:48 GMT Received: from [64.75.4.241] by mail.atkinshome.com with HTTP; Wed, 01 May 2002 10:20:34 -0700 (PDT) Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Cc: wmoran@potentialtech.com From: dave@atkinshome.com Subject: Re: samba/inetd - netbios-ns/udp: bind: Address already in use error messages X-Sent-From: dave@atkinshome.com Date: Wed, 01 May 2002 10:20:34 -0700 (PDT) X-Mailer: Web Mail 5.0.8-8 Message-Id: <20020501102048.18324.h002.c001.wm@mail.atkinshome.com.criticalpath.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After digging around for a while, I eventually rebooted and the problem went away! I think what may have happened is that when I installed samba originally, I may have started it from the command line and never killed it before allowing inetd to take over... doh! > >>Have you checked /usr/local/etc/rc.d for a startup script? > > there is no /usr/local/etc. > I've never seen a FreeBSD system without /usr/local/etc - unless > you manually removed it. Yes, I wondered about that (/usr/local/etc). It was not created during the install of any of my systems, unless I chose to add packages such as apache. On another freeBSD box that I installed the apache distribution and other things, /usr/local/etc got created, along with an apache folder in there which has a startup script for apache. For these servers, I did a developer install, but did not install any additional packages. After the initial install, there are no folders in /usr/local at all. To track down own the daemon is getting started, I start with /etc/defaults/rc.conf which says: rc_conf_files="/etc/rc.conf /etc/rc.conf.local" there is no rc.conf.local checked both files, no mention of anything samba-related. No X installed either. > nmbd is the problem. It looks like it's starting as a daemon. Check carefully > to find out where this is occurring. Bootup messages are helpful, if it's > listed after "Local package initialization:" then it's being started from > /usr/local/etc/rc.d (use "dmesg -a" to verify this) nothing helpful in dmesg...but here it is, just in case you see something (Had to reboot b/c it was full of error messages): Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Mon Mar 11 19:34:35 PST 2002 root@crwebx3.crdc.consumerreview.org:/usr/obj/usr/src/sys/WEBX Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (662.22-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff real memory = 2147475456 (2097144K bytes) config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> q avail memory = 2087936000 (2039000K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Changing APIC ID for IO APIC #1 from 0 to 3 on chip Programming 16 pins in IOAPIC #0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc0387000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc038709c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fc330 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard IOAPIC #1 intpin 6 -> irq 2 pci0: on pcib0 fxp0: port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 2 at device 8.0 on pci0 fxp0: Ethernet address 00:d0:b7:9e:aa:4a inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: at 14.0 isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x8b0-0x8bf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ohci0: mem 0xfe100000-0xfe100fff irq 10 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib1: on motherboard IOAPIC #1 intpin 15 -> irq 5 IOAPIC #1 intpin 0 -> irq 10 pci1: on pcib1 pcib2: at device 2.0 on pci1 IOAPIC #1 intpin 14 -> irq 11 pci2: on pcib2 pci2: (vendor=0x9005, dev=0x00c5) at 4.0 irq 5 ahc0: port 0xd800-0xd8ff mem 0xf8ffe000-0xf8ffefff irq 11 at device 4.1 on pci2 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs aac0: mem 0xf0000000-0xf3ffffff irq 5 at device 2.1 on pci1 aac0: i960RX 100MHz, 54MB cache memory, no battery support aac0: Kernel 2.1-3, Build 2951, S/N 401d0 fxp1: port 0xccc0-0xccff mem 0xfa000000-0xfa0fffff,0xfa100000-0xfa100fff irq 10 at device 8.0 on pci1 fxp1: Ethernet address 00:b0:d0:49:d6:e9 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0:
ifconfig wx0 139.187.94.95

It also took it and showed the same when I gave the command
ifconfig

Does this mean that the driver for the NIC was loaded successfully?Does the second ifconfig cammand I gave really reached the driver thru an ioctl call?
I was not able to ping tho'.But want to know if atleast the attach has happened successfully tho not the transmit/receive?

Thanks for your time,
please help
shubha
 
  --------------399C5F6BD799FC9FC2492655-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 23: 6:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from scanmail3.cableone.net (scanmail3.cableone.net [24.116.0.123]) by hub.freebsd.org (Postfix) with ESMTP id DB69037B416 for ; Wed, 1 May 2002 23:06:34 -0700 (PDT) Received: from scanmail3.cableone.net ([10.116.0.123]) by scanmail3.cableone.net with Microsoft SMTPSVC(5.5.1877.687.68); Wed, 1 May 2002 23:07:21 -0700 Received: from scanmail3.cableone.net [24.116.0.123] by scanmail3.cableone.net (SMTPD32-7.04) id A7943C10152; Wed, 01 May 2002 23:07:16 -0700 Received: from (19-236.bilcpe.cableone.net [24.117.19.236]) by mail.cableone.net with SMTP (MailShield v2.04 - WIN32 Jul 17 2001 17:12:42); Wed, 01 May 2002 23:07:16 -0600 Date: Thu, 2 May 2002 01:06:02 -0500 (CDT) From: Denny White To: freebsd-questions@freebsd.org Subject: sane-find-scanner Message-ID: <20020502004639.U202-100000@hal.cableone.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-SMTP-HELO: hal.cableone.net X-SMTP-MAIL-FROM: dennyboy@cableone.net X-SMTP-RCPT-TO: freebsd-questions@freebsd.org X-SMTP-PEER-INFO: 19-236.bilcpe.cableone.net [24.117.19.236] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I did a cvsup to update my ports because I'd read the latest version of sane-backends & frontends now supported the hp scanjet 3300c & a lot of the functions for the 3400c. I installed /usr/ports/graphics/sane-backends-1.0.7_1 & sane-frontends-1.0.7 I've done: sh MAKEDEV uscanner0 I've added usb scanner support to my kernel & done config MYKERNEL cd ../../compile/MYKERNEL make depend make make install cd /usr/local/etc/sane.d Edited hp.conf to use uscanner0 Shutdown & rebooted Still get in dmesg: ugen1: Hewlett-Packard Scanjet 3400cse, rev 1.00/0.00, addr 3 ugen1: setting configuration index 0 failed device_probe_and_attach: ugen1 attach returned 6 I read in one of the posts to this mailing list, among other things, something about the scanner being turned on. This machine is dual-boot with windoze 98se on one drive & fbsd 4.5 release on the other with one extra msdos drive for storage. I know, in windoze, the light isn't on on the scanner until you use a program to access it. Could this be the problem or did I maybe screw something up in the above listed steps when I was trying to install scanner support? "Windows is the Virus, Linux is the Vaccine, FreeBSD is the Cure!" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80NdXy0Ty5RZE55oRAqSxAKCs4RNWiSZ7WMpSyX2HppN+DdDvqwCZAWqK 7hqNHR32qW/A97RiqKSDZfU= =OJpu -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed May 1 23:30:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from neptune.dbn.stormnet.co.za (neptune.dbn.stormnet.co.za [196.22.196.1]) by hub.freebsd.org (Postfix) with ESMTP id 6E5C337B400 for ; Wed, 1 May 2002 23:30:15 -0700 (PDT) Received: from postoffice.brabys.co.za ([192.96.48.13] helo=brabys.co.za) by neptune.dbn.stormnet.co.za with esmtp (Exim 3.34 #1) id 173A8p-00085l-00 for freebsd-questions@freebsd.org; Thu, 02 May 2002 08:32:36 +0200 Received: from nelis.brabys.co.za (proxy-inner.brabys.co.za [192.96.48.11] (may be forged)) by brabys.co.za (8.12.0/8.12.0) with ESMTP id g426Tkjr004791 for ; Thu, 2 May 2002 08:29:46 +0200 Message-Id: <5.1.0.14.2.20020502081544.013d6778@192.96.48.11> X-Sender: nelis@192.96.48.11 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 08:30:07 +0200 To: freebsd-questions@freebsd.org From: Nelis Lamprecht Subject: firewall - ipfw rules Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-MailScanner: Found to be clean X-Scanner: exiscan *173A8p-00085l-00*wWhWZ8exaLE* http://duncanthrax.net/exiscan/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I am trying to create a custom ruleset for ipfw on a server that is configured as a mail server and a web server. I have done all the necessary steps to enable the firewall by compiling the kernel with relevant options and also setting up the rc.conf to point to my ruleset. I have also setup the rules to allow dns and certain icmp traffic for ping and traceroute which is working fine. My box is configured with 2 nic's one external and one internal ( 192.168.0.0 ) My problem is I can't seem to get a rule working to except http to my webserver and this is what i have created as a rule: add 00301 allow tcp from any to external-ip 80 add 00302 allow tcp from any to external-ip 25 add 00303 allow tcp from any to external-ip 110 *external-ip being the ip address of the external nic naturally ;-) this is either incorrect or I have forgotten something out in either the ruleset or the rc.firewall file. Can someone please give me an example of a ruleset for a web server and/or mail server or explain to me what needs to be done? thanks in advance. nelis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 0: 7: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-oe12.hotmail.com [216.32.180.116]) by hub.freebsd.org (Postfix) with ESMTP id 1BA4537B400 for ; Thu, 2 May 2002 00:06:58 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 00:06:58 -0700 X-Originating-IP: [203.149.33.187] From: "workathome" To: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , <1000trips@pantip.inet.co.th>, , , , , , , Subject: =?windows-874?B?4bnQudO42MOh1KggSW50ZXJuYXRpb25hbCBlLUJ1c2luZXNzICE=?= Date: Thu, 2 May 2002 14:08:52 +0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_002E_01C1F1E2.E3AF3D60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 07:06:58.0046 (UTC) FILETIME=[F2EBD9E0:01C1F1A7] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C1F1E2.E3AF3D60 Content-Type: text/plain; charset="windows-874" Content-Transfer-Encoding: quoted-printable =E1=B9=D0=B9=D3=B8=D8=C3=A1=D4=A8 International e-Business ! =E0=C3=D5=C2=B9=C3=D9=E9=C7=D4=B8=D5=A1=D2=C3=B7=D3=A7=D2=B9 = =B8=D8=C3=A1=D4=A8=B9=D2=B9=D2=AA=D2=B5=D4 =BA=B9 Internet =E0=C3=D5=C2=B9=C3=D9=E9=E1=BC=B9=A1=D2=C3=B7=D3=A7=D2=B9=E0=BE=D4=E8=C1=C3= =D2=C2=E4=B4=E9=BE=D4=E0=C8=C9=E3=B9=E1=B5=E8=C5=D0=E0=B4=D7=CD=B9 =E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=CD=C2=E8=D2=A7=A8=C3=D4=A7=A8=D1=A7=E1=BA= =BA=B7=D3=A7=D2=B9=B9=CD=A1=E0=C7=C5=D2 17,000 =B6=D6=A7 100,000 =BA=D2=B7/=E0=B4=D7=CD=B9 =E0=C7=C5=D2=B7=D5=E8=B5=E9=CD=A7=E3=AA=E9 : 7-14 = =AA=C1./=CA=D1=BB=B4=D2=CB=EC =E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=CD=C2=E8=D2=A7=A8=C3=D4=A7=A8=D1=A7=E1=BA= =BA=B7=D3=A7=D2=B9=E0=B5=E7=C1=E0=C7=C5=D2 50,000 =B6=D6=A7 170,000 =BA=D2=B7/=E0=B4=D7=CD=B9 =E0=C7=C5=D2=B7=D5=E8=B5=E9=CD=A7=E3=AA=E9 : 20-40 = =AA=C1./=CA=D1=BB=B4=D2=CB=EC =E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=E0=C3=E8=A7=A1=D3=C5=D1=A7=E0=B5=E7=C1=B7= =D5=E8=E1=BA=BA=B7=D3=A7=D2=B9=E0=B5=E7=C1=E0=C7=C5=D2 =A4=D8=B3=CA=D2=C1=D2=C3=B6=B7=D3=C3=D2=C2=E4=B4=E9 100,000 = =BA=D2=B7=E3=B9=E0=B4=D7=CD=B9=E1=C3=A1 =A4=D8=B3=CA=D2=C1=D2=C3=B6=B7=D3=C3=D2=C2=E4=B4=E9 350,000 = =BA=D2=B7/=E0=B4=D7=CD=B9 =C0=D2=C2=E3=B9 6 =E0=B4=D7=CD=B9=E1=C3=A1 =B4=D9=C3=D2=C2=C5=D0=E0=CD=D5=C2=B4=E4=B4=E9=B7=D5=E8 = http://www.thaiworkathome.com/bestjob/ ------=_NextPart_000_002E_01C1F1E2.E3AF3D60 Content-Type: text/html; charset="windows-874" Content-Transfer-Encoding: quoted-printable

=E1=B9=D0=B9=D3=B8=D8=C3=A1=D4=A8 = International e-Business=20 !
=E0=C3=D5=C2=B9=C3=D9=E9=C7=D4=B8=D5=A1=D2=C3=B7=D3=A7=D2=B9 = =B8=D8=C3=A1=D4=A8=B9=D2=B9=D2=AA=D2=B5=D4 =BA=B9=20 Internet
=E0=C3=D5=C2=B9=C3=D9=E9=E1=BC=B9=A1=D2=C3=B7=D3=A7=D2=B9=E0=BE= =D4=E8=C1=C3=D2=C2=E4=B4=E9=BE=D4=E0=C8=C9=E3=B9=E1=B5=E8=C5=D0=E0=B4=D7=CD= =B9
 
=E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=CD=C2=E8=D2=A7=A8=C3=D4=A7=A8=D1= =A7=E1=BA=BA=B7=D3=A7=D2=B9=B9=CD=A1=E0=C7=C5=D2
17,000=20 =B6=D6=A7 100,000 = =BA=D2=B7/=E0=B4=D7=CD=B9
=E0=C7=C5=D2=B7=D5=E8=B5=E9=CD=A7=E3=AA=E9 = : 7-14 =AA=C1./=CA=D1=BB=B4=D2=CB=EC
 
=E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=CD=C2=E8=D2=A7=A8=C3=D4=A7=A8=D1= =A7=E1=BA=BA=B7=D3=A7=D2=B9=E0=B5=E7=C1=E0=C7=C5=D2
50,000=20 =B6=D6=A7 170,000 = =BA=D2=B7/=E0=B4=D7=CD=B9
=E0=C7=C5=D2=B7=D5=E8=B5=E9=CD=A7=E3=AA=E9 = : 20-40 =AA=C1./=CA=D1=BB=B4=D2=CB=EC
 
=E1=BC=B9=B7=D3=C3=D2=C2=E4=B4=E9=E0=C3=E8=A7=A1=D3=C5=D1=A7=E0=B5= =E7=C1=B7=D5=E8=E1=BA=BA=B7=D3=A7=D2=B9=E0=B5=E7=C1=E0=C7=C5=D2
=A4=D8= =B3=CA=D2=C1=D2=C3=B6=B7=D3=C3=D2=C2=E4=B4=E9 100,000=20 =BA=D2=B7=E3=B9=E0=B4=D7=CD=B9=E1=C3=A1
=A4=D8=B3=CA=D2=C1=D2=C3=B6=B7= =D3=C3=D2=C2=E4=B4=E9 350,000 =BA=D2=B7/=E0=B4=D7=CD=B9 =C0=D2=C2=E3=B9 = 6=20 =E0=B4=D7=CD=B9=E1=C3=A1
=B4=D9=C3=D2=C2=C5=D0=E0=CD=D5=C2=B4=E4=B4=E9= =B7=D5=E8 http://www.thaiworkathome= .com/bestjob/
------=_NextPart_000_002E_01C1F1E2.E3AF3D60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 0:23:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id 029BE37B41A for ; Thu, 2 May 2002 00:23:51 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g427OPt18509; Thu, 2 May 2002 10:24:25 +0300 Message-Id: <200205020724.g427OPt18509@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 2 May 02 10:22:13 +0200 From: "Toomas Aas" Organization: Tartu City Government To: "Christopher J. Umina" , freebsd-questions@freebsd.org Date: Thu, 2 May 2002 10:22:03 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: PHP4, Apache & mod_ssl port? In-reply-to: <006101c1f16a$8eee64e0$0301a8c0@uminafamily.com> X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! > I still, to this date cannot build a nice Apache_1.3.x server with PHP4 > (with imap) and mod_ssl on this 4.5 system. I've done it multiple times on > a 4.1 system and the install went seemlessly. Is there something different > with BSD4.5? I'm lost with everything in this case. This is the procedure that I successfully used a couple of days ago to do exactly that you are trying to do. My system is 4.5-RELEASE-p1 with MySQL installed from ports. Note that I'm using the "GNU" layout - your taste may differ. Sources used: Apache 1.3.24 PHP 4.2.0 mod_ssl 2.8.8 UW-IMAP 2001a The procedure (line wrapping added courtesy of my mail client): cd imap2001a make bsf cd ../apache_1.3.24 ./configure cd ../php-4.2.0 ./configure \ --with-apache=../apache_1.3.24 \ --with-imap=../imap-2001a \ --with-mysql=/usr/local \ --with-layout=GNU \ --with-gettext \ --with-xml \ --with-mcrypt \ --with-zlib make install cd ../mod_ssl-2.8.8-1.3.24 setenv SSL_BASE=SYSTEM setenv EAPI_MM=SYSTEM ./configure --with-apache=../apache_1.3.24 cd ../apache ./configure \ --with-layout=GNU --activate-module=src/modules/php4/libphp4.a \ --enable-module=ssl make make install It worked without a hitch. I know that I should be using ports, but I'm just bad ;-) -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * The trouble with the global village are all the global village idiots. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 1:48:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailc.telia.com (mailc.telia.com [194.22.190.4]) by hub.freebsd.org (Postfix) with ESMTP id AE77137B41B for ; Thu, 2 May 2002 01:48:28 -0700 (PDT) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by mailc.telia.com (8.11.6/8.11.6) with ESMTP id g428mM523679 for ; Thu, 2 May 2002 10:48:23 +0200 (CEST) Received: from falcon.midgard.homeip.net (h53n2fls20o913.telia.com [212.181.163.53]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id KAA20041 for ; Thu, 2 May 2002 10:48:14 +0200 (CEST) Received: (qmail 2089 invoked by uid 1001); 2 May 2002 08:48:13 -0000 Date: Thu, 2 May 2002 10:48:13 +0200 From: Erik Trulsson To: Dale Morris Cc: freebsd-questions@FreeBSD.ORG Subject: Re: dvips Message-ID: <20020502084812.GA2064@student.uu.se> Mail-Followup-To: Dale Morris , freebsd-questions@FreeBSD.ORG References: <20020501202052.A73652@well.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020501202052.A73652@well.com> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 08:20:52PM -0700, Dale Morris wrote: > Where do I find dvips? When I try to install it from the ports I get: > >> Attempting to fetch from > >> ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/. > fetch: dvips576.tar.gz: File unavailable (e.g., file not found, no > access) > >> Couldn't fetch it - please try to retrieve this > >> port manually into /usr/ports/distfiles/ and try again. > *** Error code 1 > > If I try to download the sources from > ftp://ftp.tex.ac.uk/tex-archive/dviware/dvips/dvips576.tar.gz > > I get an error saying it can't find the file. > > Any other way to print dvi files without dvips? Workarounds? dvips is usually installed as part of print/teTeX. It is probably the best way to get it, but be warned that teTeX is quite large. -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2: 4:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id 8495C37B48A for ; Thu, 2 May 2002 02:04:45 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id 4C3BEA80D; Thu, 2 May 2002 19:04:44 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id 498EB542F for ; Thu, 2 May 2002 19:04:44 +1000 (EST) Date: Thu, 2 May 2002 19:04:44 +1000 (EST) From: Andrew To: freebsd-questions@freebsd.org Subject: Linksys WMP11 Message-ID: <20020502185458.Q24148-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've just got hold of a LinkSys WMP11 802.11b wireless ethernet card. It is detected by the wi driver: wi0: mem 0xff000000-0xff000fff irq 10 at device 17.0 on pci0 wi0: 802.11 address: 00:06:25:03:78:a4 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary 1.00.05, Station 1.03.01 I'm trying to get it to act as a base station/access point but I can't get it going in either ad-hoc mode or IBSS. I have a MacOSX box with an Airport card to test with. I've tried: # set the channel ${WICONTROL} -i ${INTERFACE} -f 11 # allow the creation of networks ${WICONTROL} -i ${INTERFACE} -c 1 # set the node name ${WICONTROL} -i ${INTERFACE} -s ${NODENAME} # create the network ${WICONTROL} -i ${INTERFACE} -q ${NETWORK} # put the interface in the network? ${IFCONFIG} ${INTERFACE} ssid "${NETWORK}" # bring up the interface ${IFCONFIG} ${INTERFACE} inet ${IP} netmask ${NETMASK} based on the man page and an article I found in samag. I've fiddled with a few other settings and I will continuer to do so but I was hoping someone could give me a few tips - either as a base station or in ad-hoc mode. I just cvsuped yesterday to get the latest wi commits. Following is the output of wicontrol -i wi0 and ifconfig wi0. Thanks, Andrew -- wicontrol -i wi0 NIC serial number: [ 0123456789 ] Station name: [ tetsuo ] SSID for IBSS creation: [ ugh ] Current netname (SSID): [ ugh ] Desired netname (SSID): [ ugh ] Current BSSID: [ 44:44:44:44:44:44 ] Channel list: [ 2047 ] IBSS channel: [ 11 ] Current channel: [ 0 ] Comms quality/signal/noise: [ 0 81 27 ] Promiscuous mode: [ Off ] Port type (1=BSS, 3=ad-hoc): [ 1 ] MAC address: [ 00:06:25:03:78:a4 ] TX rate (selection): [ 3 ] TX rate (actual speed): [ 2 ] RTS/CTS handshake threshold: [ 2347 ] Create IBSS: [ On ] Access point density: [ 1 ] Power Mgmt (1=on, 0=off): [ 0 ] Max sleep time: [ 100 ] WEP encryption: [ Off ] TX encryption key: [ 1 ] Encryption keys: [ ][ ][ ][ ] ifconfig wi0 wi0: flags=8843 mtu 1500 inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255 ether 00:06:25:03:78:a4 media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps) status: no carrier ssid ugh 1:ugh stationname tetsuo channel 7 authmode OPEN powersavemode OFF powersavesleep 100 wepmode OFF weptxkey 1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:20:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f187.law14.hotmail.com [64.4.21.187]) by hub.freebsd.org (Postfix) with ESMTP id C5D7737B405 for ; Thu, 2 May 2002 02:20:47 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 02:20:47 -0700 Received: from 210.49.58.45 by lw14fd.law14.hotmail.msn.com with HTTP; Thu, 02 May 2002 09:20:47 GMT X-Originating-IP: [210.49.58.45] From: "Michael Coward" To: freebsd-questions@FreeBSD.ORG Subject: Very Inportant Question Date: Thu, 02 May 2002 19:20:47 +1000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 02 May 2002 09:20:47.0640 (UTC) FILETIME=[A4EEA980:01C1F1BA] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I just downloaded FreeBsd Version 4.5 ISO. I curently have windoes XP on my computer and you know how xp can run multiple operating systems!! Well if I install FREEBSD on the same harddisk will there be ne conflicts?? Well please get back to me asap Regards Michael _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:22:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from andrsn.stanford.edu (andrsn.Stanford.EDU [171.66.112.163]) by hub.freebsd.org (Postfix) with ESMTP id A4FBF37B41D for ; Thu, 2 May 2002 02:22:48 -0700 (PDT) Received: from localhost (localhost.stanford.edu [127.0.0.1]) by andrsn.stanford.edu (8.11.6/8.11.6) with ESMTP id g429I0H34376; Thu, 2 May 2002 02:18:00 -0700 (PDT) (envelope-from andrsn@andrsn.stanford.edu) Date: Thu, 2 May 2002 02:18:00 -0700 (PDT) From: Annelise Anderson To: Shantanu Cc: "freebsd-questions@freebsd.org" Subject: Re: Building Kernel -- which is fastest,reliable,easy? In-Reply-To: <3AEF00E3.66D085DA@ieee.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, 2 May 2001, Shantanu wrote: > Hi! > 1) cd /usr/src/sys/i386/conf > config MYKERN > cd ../../compile/MYKERN > make dep > make > make install > > Reboot > > 2) cd /usr/src > make buildkernel KERNCONF=MYKERN > make installkernel KERNCONF=MYKERN > > Reboot > > 3) cd /usr/src > make kernel KERNCONF=MYKERN > > Reboot > > Which is the best method to compile? > It some situations, they're equivalent (they're all easy). 2 and 3 are identical, just two steps in 2 instead of one. Useful if you don't want to install the built kernel as the default; maybe you want a new kernel.GENERIC. Method 1 uses the already-installed system. Method two uses the system files you have built with "make buildworld". This is especially useful when you have not yet done a "make installworld", because if the kernel fails, you can easily revert to your old system (not yet overwritten) and kernel.old. If you have done an installworld so the installed system and the "built" system are not different, then method one is equivalent to 2 and to its 2-step variant, 3. However a kernel build with the 2-3 methods will always end up in the /usr/obj structure rather than the /usr/src structure, AFAIK, and will reveal this. For example, this kernel was build with the new (2 or 3) method: xanne@killer ~ % uname -a FreeBSD killer.stanford.edu 4.5-STABLE FreeBSD 4.5-STABLE #0: Sun Mar 10 04:04:01 PST 2002 xanne@killer.stanford.edu:/usr/obj/usr/src/sys/KILLER i386 whereas this kernel was build with the old (1) method (although I use make depend, not make dep, when I do mine)--or was probably installed with the system and not rebuilt. xanne@vaio ~ % uname -a FreeBSD vaio.stanford.edu 4.5-RC1 FreeBSD 4.5-RC1 #0: Tue Jan 8 23:37:23 PST 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC i386 The reason for using the new method is that it will work when changes have been made and it can be tested before you install the newly built system over your old installed system (i.e., after buildworld and before installworld) so you have a chance to back out if the new kernel doesn't work. Annelise -- Annelise Anderson Author of: FreeBSD: An Open-Source Operating System for Your PC Available from: BSDmall.com and amazon.com Book Website: http://www.bittreepress.com/FreeBSD/introbook/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:24:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mars.doubleday.com.au (ns1.doubleday.com.au [203.52.223.2]) by hub.freebsd.org (Postfix) with SMTP id 3F0E137B404 for ; Thu, 2 May 2002 02:24:09 -0700 (PDT) Received: (qmail 74747 invoked from network); 2 May 2002 09:13:42 -0000 Received: from unknown (HELO winxp1) (150.28.100.21) by ns1.doubleday.com.au with SMTP; 2 May 2002 09:13:42 -0000 Message-ID: <007f01c1f1bb$665e02a0$1501a8c0@winxp1> From: "Brad" To: Subject: Program for listing mp3 length, bitrate, etc Date: Thu, 2 May 2002 19:26:11 +1000 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_007C_01C1F20F.37659540" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_007C_01C1F20F.37659540 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi All, Does anyone know of a program that i can run to list the mp3 track = length, bitrate, and other details, similar to the way WindowsXP can? I = have a few GB of mp3's on my FreeBSD/Samba file server that i would like = to process, and throw the output into a text file. Any ideas? Thanks -Brad ------=_NextPart_000_007C_01C1F20F.37659540 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi All,
 
Does anyone know of a program that i = can run to=20 list the mp3 track length, bitrate, and other details, similar to the = way=20 WindowsXP can?  I have a few GB of mp3's on my FreeBSD/Samba file = server=20 that i would like to process, and throw the output into a text=20 file.
 
Any ideas?
 
Thanks
 
-Brad
 
 
------=_NextPart_000_007C_01C1F20F.37659540-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:24:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from router.darlow.co.uk (pc2-bigg2-0-cust101.ltn.cable.ntl.com [213.107.35.101]) by hub.freebsd.org (Postfix) with ESMTP id 544FD37B41C for ; Thu, 2 May 2002 02:24:22 -0700 (PDT) Received: from there (neil@ideal.darlow.co.uk [192.168.0.2]) by router.darlow.co.uk (8.11.6/8.11.6) with SMTP id g429OKj70951 for ; Thu, 2 May 2002 10:24:21 +0100 (BST) (envelope-from neil@darlow.co.uk) Message-Id: <200205020924.g429OKj70951@router.darlow.co.uk> Content-Type: text/plain; charset="iso-8859-1" From: Neil Darlow To: freebsd-questions@freebsd.org Subject: gnupg-1.0.7 bites (was gnupg compatibility) Date: Thu, 2 May 2002 10:24:19 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 05/01/2002 at 16:35:21, Kris Kennaway wrote: > Why are you asking us? This is a gnupg support question. Fair enough, I'll follow it up through the GnuPG support channels but users may find the following useful to know. From /usr/local/share/doc/gnupg/NEWS: * Secret keys are now stored and exported in a new format which uses SHA-1 for integrity checks. This format renders the Rosa/Klima attack useless. Other OpenPGP implementations might not yet support this, so the option --simple-sk-checksum creates the old vulnerable format. * The default cipher algorithm for encryption is now CAST5, default hash algorithm is SHA-1. This will give us better interoperability with other OpenPGP implementations. This implies that default encryption and signing capabilites between 1.0.7 and previous versions may not be compatible. Indications are that this is the case as I can view signed and encrypted mails generated by 1.0.7 with 1.0.7 but not between different versions. From the gnupg-1.0.7 announcement mail at gnupg.org: Please note that due to a bug in prior versions, it won't be possible to downgrade to 1.0.6 unless you use the GnuPG version which comes with Debian's Woody release or you apply the patch http://www.gnupg.org/developer/gpg-woody-fix.txt . This could catch the unwary. If you upgrade to gnupg-1.0.7, without backing-up your existing configuration, modifications to those files could prevent a regression to a previous version. The .gnupg/options file now has additional options. I've found that simply moving the existing file and running gpg isn't sufficient to put the new file in place. The best solution is to rename the existing .gnupg directory and run gpg to create a new one then *copy* existing configuration files into the new .gnupg directory. Regards, Neil Darlow M.Sc. -- 1024D/531F9048 1999-09-11 Neil Darlow GPG Fingerprint = 359D B8FF 6273 6C32 BEAA 43F9 E579 E24A 531F 9048 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:29: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pcwin002.win.tue.nl (pcwin002.win.tue.nl [131.155.71.72]) by hub.freebsd.org (Postfix) with ESMTP id 4556C37B404 for ; Thu, 2 May 2002 02:29:03 -0700 (PDT) Received: from pcwin002.win.tue.nl (orb_rules@localhost [127.0.0.1]) by pcwin002.win.tue.nl (8.12.3/8.12.2) with ESMTP id g429SvD0025938; Thu, 2 May 2002 11:28:57 +0200 (CEST) (envelope-from stijn@pcwin002.win.tue.nl) Received: (from stijn@localhost) by pcwin002.win.tue.nl (8.12.3/8.12.3/Submit) id g429Sver025937; Thu, 2 May 2002 11:28:57 +0200 (CEST) Date: Thu, 2 May 2002 11:28:57 +0200 From: Stijn Hoop To: Brad Cc: questions@freebsd.org Subject: Re: Program for listing mp3 length, bitrate, etc Message-ID: <20020502112857.B60771@pcwin002.win.tue.nl> References: <007f01c1f1bb$665e02a0$1501a8c0@winxp1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <007f01c1f1bb$665e02a0$1501a8c0@winxp1>; from brad@bookandmusicclubs.com.au on Thu, May 02, 2002 at 07:26:11PM +1000 X-Bright-Idea: Let's abolish HTML mail! Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, On Thu, May 02, 2002 at 07:26:11PM +1000, Brad wrote: > Does anyone know of a program that i can run to list the mp3 track length, > bitrate, and other details, similar to the way WindowsXP can? I have a few > GB of mp3's on my FreeBSD/Samba file server that i would like to process, and > throw the output into a text file. /usr/ports/audio/mp3info does the trick for me. Use mp3info -x to get the technical details. HTH, --Stijn -- Fairy tales do not tell children that dragons exist. Children already know dragons exist. Fairy tales tell children the dragons can be killed. -- G.K. Chesterton To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:34:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from surreal.nl (surreal.nl [212.204.236.10]) by hub.freebsd.org (Postfix) with ESMTP id D752A37B400 for ; Thu, 2 May 2002 02:34:38 -0700 (PDT) Received: from vscan (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 442E9434; Thu, 2 May 2002 11:34:37 +0200 (CEST) Received: by surreal.nl (Postfix, from userid 1000) id 7A39D42C; Thu, 2 May 2002 11:34:36 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 773A72A8; Thu, 2 May 2002 11:34:36 +0200 (CEST) Date: Thu, 2 May 2002 11:34:36 +0200 (CEST) From: Walter Hop To: Michael Coward Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Very Inportant Question In-Reply-To: Message-ID: <20020502113034.E42691-100000@surreal.nl> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by surreal.binity.net (amavis-perl-11-sky2) for freebsd-questions@FreeBSD.ORG mickal13@hotmail.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [in reply to Michael Coward , 02/05/02] > Hi I just downloaded FreeBsd Version 4.5 ISO. I curently have windoes XP on > my computer and you know how xp can run multiple operating systems!! Well if > I install FREEBSD on the same harddisk will there be ne conflicts?? If you create the FreeBSD partitions in free space, your existing partitions will be left alone. Basically you have two options: 1) keep the Windows boot loader and use c:\boot.ini to boot FreeBSD; 2) install the FreeBSD boot manager in the MBR which will give you the option of booting into Windows or FreeBSD. I have used option 2 as it is very simple to setup, just after fdisk'ing in the FreeBSD sysinstall tool, when asked, answer 'Install the FreeBSD boot manager'. I know it sounds a little tricky but it has never screwed up my previous install. (Now dual booting Windows 2000 and FreeBSD using the FreeBSD boot loader) -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 2:54:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from surreal.nl (surreal.nl [212.204.236.10]) by hub.freebsd.org (Postfix) with ESMTP id 9E50C37B416 for ; Thu, 2 May 2002 02:54:28 -0700 (PDT) Received: from vscan (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 47A5E469; Thu, 2 May 2002 11:54:28 +0200 (CEST) Received: by surreal.nl (Postfix, from userid 1000) id EB15D445; Thu, 2 May 2002 11:54:26 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id E8037434; Thu, 2 May 2002 11:54:26 +0200 (CEST) Date: Thu, 2 May 2002 11:54:26 +0200 (CEST) From: Walter Hop To: shubhamr Cc: FreeBSD Questions Subject: Re: please help me-urgent. In-Reply-To: <3CD10B2C.C1D15FE9@malkauns.nsc.com> Message-ID: <20020502115050.O43287-100000@surreal.nl> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by surreal.binity.net (amavis-perl-11-sky2) for freebsd-questions@freebsd.org shubhamr@malkauns.nsc.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG y[in reply to shubhamr , 02/05/02] > I did set the IP address of my freeBSD machine by the command > ifconfig wx0 139.187.94.95 > > It also took it and showed the same when I gave the command > ifconfig > > Does this mean that the driver for the NIC was loaded successfully? Yes! The ifconfig tool can only work with properly detected interfaces, which means that if you can see your card with "ifconfig -l", the hardware is probably working well. > I was not able to ping tho'.But want to know if atleast the attach has > happened successfully tho not the transmit/receive? I guess it has. What type of problem do you get when you ping? If you receive "No route to host", maybe you need to add a default route with: % route add default your.gateways.ip.addr as ifconfig does not do this for you. Also, maybe you need to add a netmask to the ifconfig command? good luck, w. -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 3:21:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20609.mail.yahoo.com (web20609.mail.yahoo.com [216.136.226.167]) by hub.freebsd.org (Postfix) with SMTP id 6B88437B405 for ; Thu, 2 May 2002 03:21:50 -0700 (PDT) Message-ID: <20020502102150.56184.qmail@web20609.mail.yahoo.com> Received: from [202.155.54.147] by web20609.mail.yahoo.com via HTTP; Thu, 02 May 2002 03:21:50 PDT Date: Thu, 2 May 2002 03:21:50 -0700 (PDT) From: agusri dodi Subject: Billing for Internet Cafe To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have been running NET CAFE with BSD box as a Gateway. Could you inform me the Intenet sites that provide open source version of Net Cafe Billing ? Thank fo reply __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 3:26:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta02bw.bigpond.com (mta02bw.bigpond.com [139.134.6.34]) by hub.freebsd.org (Postfix) with ESMTP id 02BC437B416 for ; Thu, 2 May 2002 03:26:45 -0700 (PDT) Received: from wskatinka ([144.135.24.78]) by mta02bw.bigpond.com (Netscape Messaging Server 4.15 mta02bw Feb 26 2002 03:44:21) with SMTP id GVHBOI00.9N4 for ; Thu, 2 May 2002 20:26:42 +1000 Received: from CPE-61-9-174-127.vic.bigpond.net.au ([61.9.174.127]) by bwmam04.mailsvc.email.bigpond.com(MailRouter V3.0l 29/1852872); 02 May 2002 20:26:42 From: "Kathy Quinlan" To: Subject: firewalls and ip filtering ?? Date: Thu, 2 May 2002 18:28:40 +0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all that was the best subject I could think of lol. I need to rebuild my firewall and I am at a loss, I used to use Natd, but since moving over to ADSL I have used the -nat switch in ppp. how do I redirect all requests to ppp's nat like I used to do for Natd. How can I restrict a certain computer to access only selected IP addresses, yes this is the kids machine, and I find that most net monitoring Winblows software is useless, It blocks most kids sites IE msn kids etc. So I think it may be easier to do in FreeBSD than winblows (plus if it is off their machine they can not try to bypass it (hard when your kids are as geeky as their parents) Regards, Kat. ____________________________________________________________________________ /"\ ASCII Ribbon Campaign | K.A.Q. Electronics \ / - NO HTML/RTF in e-mail | Software and Electronic Engineering X - NO Word docs in e-mail | Perth Western Australia / \ | Ph +61 419 923 731 ____________________________________________________________________________ --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.351 / Virus Database: 197 - Release Date: 19/04/2002 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 3:35:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mcqueen.wolfsburg.de (pns.wobline.de [212.68.68.5]) by hub.freebsd.org (Postfix) with ESMTP id A0AE537B41C for ; Thu, 2 May 2002 03:35:37 -0700 (PDT) Received: from k6-2-300.tisys.org (ppp-185.wobline.de [212.68.69.196]) by mcqueen.wolfsburg.de (8.11.3/8.11.3/sh-2002041503) with ESMTP id g42AZHI25165; Thu, 2 May 2002 12:35:17 +0200 Received: from daemon.tisys.org (palomino-1533.tisys.org [192.168.0.3]) by k6-2-300.tisys.org (8.12.3/8.12.3) with ESMTP id g42Aado2049194; Thu, 2 May 2002 12:36:40 +0200 (CEST) (envelope-from nils@daemon.tisys.org) Received: (from nils@localhost) by daemon.tisys.org (8.12.3/8.12.3/Submit) id g42AZVpj002988; Thu, 2 May 2002 12:35:31 +0200 (CEST) Date: Thu, 2 May 2002 12:35:31 +0200 From: Nils Holland To: Scott Robbins Cc: Patrik ?str?m , freebsd-questions@FreeBSD.ORG Subject: Re: DMA problem fallback to PIO mode Message-ID: <20020502123531.B2834@daemon.tisys.org> References: <20020502004453.GA2338@scott2.homeunix.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020502004453.GA2338@scott2.homeunix.net>; from scottro@nyc.rr.com on Wed, May 01, 2002 at 07:44:53PM -0500 X-Operating-System: FreeBSD palomino-1533.tisys.org 4.5-STABLE FreeBSD 4.5-STABLE X-Machine-Uptime: 12:21PM up 2:43, 1 user, load averages: 0.01, 0.02, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 07:44:53PM -0500, Scott Robbins stood up and spoke: > > May 1 22:02:36 samuraj /kernel: ad1: DMA problem fallback to PIO mode > > May 1 22:02:41 samuraj /kernel: ad1c: hard error reading fsbn 5166688 of > > 258329 > > This is a common problem. 9 times out of 10, it can be fixed by > replacing your IDE cable with shielded 80 pin ATA 100 IDE cables. Indeed - and I can tell you that not all of these 80-pin seemingly ATA100-capable cables are the same. We once built a lot of identical machines using (if I remember correctly) Chaintech boards, using the cables supplied with them in order to connect UDMA100 HDDs from Western Digital. Although these IDE cables were 80pin, many of the machines we had built showed the above symptoms. When we replaced the (maunufacturer-supplied) IDE cables against our own ones, the problems were instantly gone. In the end, even though not all machines were affected, we still decided to put our own 80pin IDE cables in all of them ;-) Bottom line: If you get error messages like mentioned above, even though you are using an 80pin IDE cable that normally *should* be able to do UDMA100 without any problems, replacing the cable against another one is definately the first thing to do before suspecting something else to be broken ;-) Greetings Nils -- Nils Holland Ti Systems - http://www.tisys.org Addicted to computing since 1987 High on FreeBSD since 1996 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 5: 7:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.nc.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id BA52437B416 for ; Thu, 2 May 2002 05:07:46 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail6.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Thu, 2 May 2002 08:07:45 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id 2A70EBB29; Thu, 2 May 2002 08:07:34 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: Siegbert Baude , "Kirk R. Wythers" Subject: Re: can't get rid of kde2 Date: Thu, 2 May 2002 08:07:33 -0400 X-Mailer: KMail [version 1.3] Cc: freebsd-questions@FreeBSD.ORG References: <1020275422.87268.121.camel@lorax.forestry.umn.edu> <3CD0BCB8.4717605A@gmx.de> In-Reply-To: <3CD0BCB8.4717605A@gmx.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020502120734.2A70EBB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday 02 May 2002 12:12 am, Siegbert Baude wrote: | Hi Kirk, | | > I have been trying to get kde3 installed. The problem seem to be first | > getting kde2 un-installed. : : | > Yet I can not seem to be able to either pkg_delete or make deinstall kde | > or old qt. pkg_delete for example, reports "not installed" | | For pkg_delete you have to use the complete port name including | version: | | pkg_delete qt1-1.45_1 Or just pkg_delete 'qt*' | With pkg_deinstall (brought to you by the "portupgrade" port) you can | use the package name without version and even globbing will work: | | pkg_deinstall 'qt*' | | for example. Actually, globbing works just fine with native pkg_delete as well. Though the number of even very experienced people who don't know that pkg_delete and pkg_info is surprisigly large, so I suspect that it's a relatively recent feature. As for meke deinstall, you know that the sequence would be cd /usr/ports/*/kde2 make deinstall or something to that effect, right? What happens when you try that? -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 5:12:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.nc.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id D101A37B405 for ; Thu, 2 May 2002 05:12:52 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail6.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Thu, 2 May 2002 08:12:52 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id 0A35BBB29; Thu, 2 May 2002 08:12:46 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: tornadox@telnor.net, "Greg 'groggy' Lehey" Subject: Re: mouse code kernel Date: Thu, 2 May 2002 08:12:45 -0400 X-Mailer: KMail [version 1.3] Cc: freebsd-questions@FreeBSD.ORG References: <0GVG00A9UVVBRZ@email.telnor.net> In-Reply-To: <0GVG00A9UVVBRZ@email.telnor.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020502121246.0A35BBB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Tuesday 30 April 2002 05:59 pm, jehova wrote: | thanks for re: | sorry for my english, i'm trying. | | when i draw a box (rectangle tool on gimp), if i do it quite | slowly, i start my draw on place where i click and drag mouse | pointer works fine. But if click and drag for draw a box faster | my box is draw away from the place where it supose to be, | something like one inch (depends on speed: faster more | desplaced, slower draw near. if i want select a text (for example | for cut and paste), slow or medium velocity works well, but if | i speed up: start selection 2,3 4 or 6 characters later. | this behavior happens with with TWM, KDE and XFCE and with | every drawing program i've been tried (gimp, xpaint or whatever). | | i've been discard Xfree because versions 3.3.6, 4.1 and 4.2 | do same on freebsd 4.4 and 4.5. nothing of this happen on linux | this is why i think maybe is a kernel related issue. If you are running X anyway, then the simplest solution is probably just to bypass the kernel mouse code entirely. Just change the mouse in your XF86Config from /dev/mouse to /dev/psm0 (for a PS/2 mouse, the most likely choice) or whatever your real underlying mouse device is and restart X. Then you won't be using the the kernel-based "sysmouse" driver at all, just X mouse support. -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 5:32:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from usintout01.net.bms.com (usintout01.bms.com [165.89.129.231]) by hub.freebsd.org (Postfix) with ESMTP id 823D337B404 for ; Thu, 2 May 2002 05:31:56 -0700 (PDT) Received: from nsukmsg02.net.bms.com ([127.0.0.1]) by mochilla.bms.com (PMDF V5.2-32 #38470) with ESMTP id <0GVH000B1HGXZ6@mochilla.bms.com> for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 12:31:47 +0000 (GMT) Received: from bms.com ([198.155.33.35]) by nsukmsg02.net.bms.com (Netscape Messaging Server 4.15) with ESMTP id GVHHGX00.MDZ for ; Thu, 02 May 2002 12:31:45 +0000 Date: Thu, 02 May 2002 14:31:43 +0200 From: Jean-Jacques Mierop Subject: FreeBSD 4.5 on Alpha server To: FreeBSD Message-id: <3CD131AF.D873436F@bms.com> Organization: Bristol-Myers Squibb MIME-version: 1.0 X-Mailer: Mozilla 4.72 [en]C-BMY (WinNT; U) Content-type: multipart/mixed; boundary="------------2C3331AEDAC343BA8CF84A64" X-Accept-Language: en Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------2C3331AEDAC343BA8CF84A64 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit --------------2C3331AEDAC343BA8CF84A64 Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <3CB68625.624C2CC8@bms.com> Date: Fri, 12 Apr 2002 09:00:53 +0200 From: Jean-Jacques Mierop Organization: Bristol-Myers Squibb X-Mailer: Mozilla 4.72 [en]C-BMY (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD 4.5 on Alpha server Content-Type: multipart/mixed; boundary="------------888A9D793FDB34EC6909C9B2" This is a multi-part message in MIME format. --------------888A9D793FDB34EC6909C9B2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I run FreeBSD 4.5 on an alpha server, AS2100a with 2 cpu's. I have 2 questions : 1 : Can we run SMP on an alpha server, or is it only on Intel based servers ? 2 : Are the StorageWorks device known by FreeBSD 4.5 ? Find after my config as well as boot messages output. It looks that Free BSD does not see my Luns (HSZ40). Thanx for any help. Have a nice day. Cheers, JJ Server Configuration ~~~~~~~~~~~~~~~~~~~~ P00>>> P00>>> P00>>>sho config Digital Equipment Corporation AlphaServer 2100A 5/250 SRM Console V5.3-14 VMS PALcode V1.20-3, OSF PALcode V1.22-1 Component Status Module ID CPU 0 P B2040-AB DECchip (tm) 21164-5 CPU 1 P B2040-AB DECchip (tm) 21164-5 Memory 0 P B2022-DA 128 MB Memory 1 P B2022-DA 128 MB Memory 2 P B2022-DA 128 MB Memory 3 P B2022-DA 128 MB I/O 24283-01 dva0.0.0.1000.0 RX26/RX23 Slot Option Hose 0, Bus 0, PCI 2 Intel 82375 Bridge to Bus 1, EISA 3 DECchip 21050-AA Bridge to Bus 2, PCI 6 S3 Trio64/Trio32 9 DEC KZPSA pkc0.7.0.9.0 SCSI Bus ID 7 dkc100.1.0.9.0 HSZ40 dkc101.1.0.9.0 HSZ40 dkc200.2.0.9.0 HSZ40 dkc300.3.0.9.0 HSZ40 dkc301.3.0.9.0 HSZ40 dkc400.4.0.9.0 HSZ40 Slot Option Hose 0, Bus 1, EISA Slot Option Hose 0, Bus 2, PCI 1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7 dka0.0.0.2001.0 RZ28D dka600.6.0.2001.0 RRD45 6 DECchip 21040-AA ewa0.0.0.2006.0 00-00-F8-20-10-3C 7 NCR 53C810 pkb0.7.0.2007.0 SCSI Bus ID 7 jkb1.0.0.2007.0 TZ mkb0.0.0.2007.0 TZ877 P00>>> You can see that there are : - 1 hard disk (dka0.0.0.2001.0 RZ28D) - 6 LUNs (dkc100.1.0.9.0 HSZ40) (dkc101.1.0.9.0 HSZ40) (dkc200.2.0.9.0 HSZ40) (dkc300.3.0.9.0 HSZ40) (dkc301.3.0.9.0 HSZ40) (dkc400.4.0.9.0 HSZ40) It looks to me that the 6 LUNs are not seen by freeBSD 4.5. These are the StorageWorks Array Controller LUNs. Are these supported by freeBSD ? Output at boot time ~~~~~~~~~~~~~~~~~~~ P00>>>boot dka600 (boot dka600.6.0.2001.0 -flags 0) block 0 of dka600.6.0.2001.0 is a valid boot block reading 375 blocks from dka600.6.0.2001.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 2ee00 initializing HWRPB at 2000 initializing page table at 1fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 1.0 (murray@axpbuilder.freebsdmall.com, Mon Jan 28 16:18:52 GMT 2002) Memory: 524288 k Loading /boot/defaults/loader.conf /kernel data=0x406778+0x2acb8 syms=[0x8+0x4e360+0x8+0x38928] \ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel]... Entering kernel at 0xfffffc0000331460... Unrecognized boot flag '0'. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Tue Jan 29 07:52:50 GMT 2002 murray@axpbuilder.freebsdmall.com:/usr/src/sys/compile/GENERIC DEC AlphaServer 2100A AlphaServer 2100A 5/250, 250MHz 8192 byte page size, 2 processors. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x4000100020116 real memory = 534700032 (522168K bytes) avail memory = 510844928 (498872K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000adc000. Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000adc0c0. md0: Preloaded image 3276800 bytes at 0xfffffc00007b80c8 md1: Malloc disk t20: using interrupt type 1 on pci bus 0 pci0: on pcib0 isab0: at device 2.0 on pci0 isa0: on isab0 pcib1: at device 3.0 on pci0 pci2: on pcib1 sym0: <810a> port 0x5000-0x50ff mem 0x81800000-0x818000ff irq 28 at device 1.0 on pci2 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking de0: port 0x5400-0x547f mem 0x81800200-0x8180027f irq 48 at device 6.0 on pci2 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 00:00:f8:20:10:3c sym1: <810> port 0x5800-0x58ff mem 0x81800100-0x818001ff irq 52 at device 7.0 on pci2 sym1: No NVRAM, ID 7, Fast-10, SE, parity checking pci0: at 6.0 irq 32 pci0: (vendor=0x1011, dev=0x0008) at 9.0 irq 44 pci0: (vendor=0x0000, dev=0x0000) at 12.0 irq 0 pci0: (vendor=0x0000, dev=0x0000) at 12.4 pci0: (vendor=0x0000, dev=0x0000) at 13.0 irq 0 pci0: (vendor=0x0000, dev=0x0000) at 13.4 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> mcclock0: at port 0x70-0x71 on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio1: reserved for low-level i/o ppc0: at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: on ppbus0 lpt0: Polled port ppi0: on ppbus0 Timecounter "alpha" frequency 249747329 Hz Waiting 15 seconds for SCSI devices to settle de0: enabling 10baseT port sa0 at sym1 bus 0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) pass3 at sym1 bus 0 target 0 lun 1 pass3: Removable Changer SCSI-2 device pass3: 5.000MB/s transfers (5.000MHz, offset 8) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) cd0 at sym0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [1304904 x 512 byte records] Mounting root from ufs:/dev/md0c WARNING: clock gained 66 days -- CHECK AND RESET THE DATE! /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5) Also, later at disklabel time, only da0 is shown, not one of the 6 LUNs. This disk corresponds to the single hard disk, dka0 --------------888A9D793FDB34EC6909C9B2 Content-Type: text/x-vcard; charset=us-ascii; name="jean-jacques.mierop.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jean-Jacques Mierop Content-Disposition: attachment; filename="jean-jacques.mierop.vcf" begin:vcard n:MIEROP;Jean-Jacques tel;fax:+32 2 351 3975 tel;work:+32 2 352 7636 x-mozilla-html:FALSE org:Bristol-Myers Squibb - Pharmaceutical Research Institute, Informatics;"Quand les poules auront des roulettes, tout ira comme sur des dents..." version:2.1 email;internet:mieropj@bms.com title:UNIX Administrator adr;quoted-printable:;;Waterloo Office Park, Building L=0D=0AB-1410 Waterloo=0D=0ABelgium;;;; fn:Jean-Jacques Mierop end:vcard --------------888A9D793FDB34EC6909C9B2-- --------------2C3331AEDAC343BA8CF84A64 Content-Type: text/x-vcard; charset=us-ascii; name="jean-jacques.mierop.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jean-Jacques Mierop Content-Disposition: attachment; filename="jean-jacques.mierop.vcf" begin:vcard n:MIEROP;Jean-Jacques tel;fax:+32 2 351 3975 tel;work:+32 2 352 7636 x-mozilla-html:FALSE org:Bristol-Myers Squibb - Pharmaceutical Research Institute, Informatics;"Quand les poules auront des roulettes, tout ira comme sur des dents..." version:2.1 email;internet:mieropj@bms.com title:UNIX Administrator adr;quoted-printable:;;Waterloo Office Park, Building L=0D=0AB-1410 Waterloo=0D=0ABelgium;;;; fn:Jean-Jacques Mierop end:vcard --------------2C3331AEDAC343BA8CF84A64-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 5:52: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from relay.alfa-bank.ru (relay.alfa-bank.ru [217.12.97.18]) by hub.freebsd.org (Postfix) with ESMTP id 87B8237B41A for ; Thu, 2 May 2002 05:52:04 -0700 (PDT) To: freebsd-questions Date: Thu, 2 May 2002 16:51:56 +0400 X-Priority: 3 (Normal) From: SMTP2/Internet%INTERNET@alfabank.ru Subject: File blocked - ScanMail for Lotus Notes-->Hi,spice girls' vocal concert Message-ID: X-MIMETrack: Serialize by Router on SMTP2/Internet(Release 5.0.9a |January 7, 2002) at 02.05.2002 16:51:57 MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ScanMail has removed an attachment during a real-time scan of the email traffic. Date: 5/2/2002 16:51:56 Virus: Blocked; File: EA10CC1202.pif From: freebsd-questions To: agerman@alfabank.ru; Action: Blocked; Scanned by ScanMail for Lotus Notes 2.5.0 with scanengine 6.150-1001 and patternfile lpt$vpn.270 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6: 4:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id AB6AA37B417 for ; Thu, 2 May 2002 06:04:16 -0700 (PDT) Received: (from mwlucas@localhost) by blackhelicopters.org (8.11.6/8.11.6) id g42D4BW98175 for questions@FreeBSD.org; Thu, 2 May 2002 09:04:11 -0400 (EDT) (envelope-from mwlucas) Date: Thu, 2 May 2002 09:04:11 -0400 From: Michael Lucas To: questions@FreeBSD.org Subject: OpenOffice: Linux binary won't run Message-ID: <20020502090411.A98157@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have OpenOffice installed, and keep running into this issue. When I run soffice, I get a notice that "the script file is being read." Rather than opening a program, I get the "repair/deinstall" screen. Any ideas, anyone? ==ml -- Michael Lucas mwlucas@FreeBSD.org, mwlucas@BlackHelicopters.org http://www.oreillynet.com/pub/q/Big_Scary_Daemons Absolute BSD: http://www.nostarch.com/abs_bsd.htm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:12: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mithrandir.codesorcery.net (cm-24-161-30-31.nycap.rr.com [24.161.30.31]) by hub.freebsd.org (Postfix) with ESMTP id 45FA437B404 for ; Thu, 2 May 2002 06:11:57 -0700 (PDT) Received: from incanus by mithrandir.codesorcery.net with local (Exim 3.35 #1 (Debian)) id 173GN0-00083w-00 for ; Thu, 02 May 2002 09:11:38 -0400 Date: Thu, 2 May 2002 09:11:38 -0400 From: "Justin R. Miller" To: freebsd-questions@FreeBSD.ORG Subject: Re: email client Message-ID: <20020502131137.GA30197@mithrandir.codesorcery.net> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <1020293112.3cd06ff87c231@www.unidavi.edu.br> Mime-Version: 1.0 Content-Type: text/plain Content-Disposition: inline; filename="msg.pgp" In-Reply-To: <1020293112.3cd06ff87c231@www.unidavi.edu.br> User-Agent: Mutt/1.3.28i X-OpenPGP-Key: http://codesorcery.net/pubkey.html Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Said lab.stihler@unidavi.edu.br on Wed, May 01, 2002 at 07:45:12PM -0300: > what is the best graphical email client for freebsd? I'd try kmail too (use the KDE3 version). - -- [!] Justin R. Miller Encrypted email preferred (key 0xC9C40C31) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE80TsJ94d6K8nEDDERAtJMAJwJWIaIm/M1dgFzA7SGPXjShVmG3QCcDZk7 nEMApjP/UGhWg3UhjyqCyyo= =sjMd -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:17:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mutara.net (ns1.mutara.net [216.158.26.30]) by hub.freebsd.org (Postfix) with ESMTP id 2ACDA37B416 for ; Thu, 2 May 2002 06:17:39 -0700 (PDT) Received: from defiant.mutara.net (defiant.mutara.net [192.168.1.20]) by mail.mutara.net (8.12.3/8.12.3) with ESMTP id g42DH4bd071279; Thu, 2 May 2002 09:17:04 -0400 (EDT) (envelope-from cgriffiths@dca.net) Received: from defiant.mutara.net (localhost [127.0.0.1]) by defiant.mutara.net (8.12.3/8.12.2) with ESMTP id g42DI3Z6014970; Thu, 2 May 2002 09:18:03 -0400 (EDT) (envelope-from cgriffiths@dca.net) Received: (from cgriffiths@localhost) by defiant.mutara.net (8.12.3/8.12.3/Submit) id g42DI3vt014969; Thu, 2 May 2002 09:18:03 -0400 (EDT) X-Authentication-Warning: defiant.mutara.net: cgriffiths set sender to cgriffiths@dca.net using -f Date: Thu, 2 May 2002 09:18:03 -0400 From: Chris Griffiths To: Michael Lucas Cc: FreeBSD-Questions Subject: Re: OpenOffice: Linux binary won't run Message-ID: <20020502091803.A14706@dca.net> References: <20020502090411.A98157@blackhelicopters.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020502090411.A98157@blackhelicopters.org>; from mwlucas@blackhelicopters.org on Thu, May 02, 2002 at 09:04:11AM -0400 X-Operating-System: FreeBSD/4.5-STABLE (i386) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Michael Lucas (mwlucas@blackhelicopters.org) wrote: > I have OpenOffice installed, and keep running into this issue. Which version of OpenOffice are you running, I have OO 1.0 installed now on a 4.5-stable machine running linux_base 6.1. I have found that all versions of OO up until 1.0 have never installed correctly and have either segfaulted or crapped out during install. > When I run soffice, I get a notice that "the script file is being > read." Rather than opening a program, I get the "repair/deinstall" > screen. Check to make sure that your .sversionrc is pointing towards your install. Also I usually install OO or SO6 as root doing the following: # ./setup -net I then point my install to /usr/local/openoffice and install everything there. When that is done I go back to my user and cd to the install directory and run bash-2.05a$ ./setup as my user and install the network install which is about 4-5 megs for OO in my home directory /home/useraccount/openoffice. You may want to make some symlinks to each programs to make things easier like: bash-2.05a$ cd /home/useraccount/openoffice bash-2.05a$ ln -s /usr/local/openoffice/program/swriter swriter You can do this for swriter, simpress, scalc, sdraw, etc. Then just add /home/useraccount/openoffice to your path and you can then issue: bash-2.05a$ swriter and it comes up. Anyway hope that helps. OO 1.0 is the only install I have been able to get running so if you are not working with that version I suggest you try it. Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:19:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 43E5137B41A for ; Thu, 2 May 2002 06:19:54 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g42DJhU26280; Thu, 2 May 2002 09:19:44 -0400 Message-ID: <3CD13E24.50409@potentialtech.com> Date: Thu, 02 May 2002 09:24:52 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: "Sulaiman A. Mirdad" Cc: freebsd-questions@freebsd.org Subject: Re: Web server flood control? References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you reply to the list as well, others can answer your question if I don't know. Sulaiman A. Mirdad wrote: > Dear Bill, > > Thank you for your reply, here are some more details; the Apache logs > indicate that they are sending 50+ HTTP request per second to different > pages on my site and the IP's they are using are spoofed IP's that > periodically change (on an average of every 5-10 mins). Because the IP's are > not fixed putting my server behind a firewall will not help. Are you sure this is the case? Are you sure you're server isn't just busy? And your assertation that a firewall won't help is nonesense. It's very likely that the spoofed packets can be firewalled if you take the time to examine them closely ... IP addys aren't the only criteria for filtering. If you really are being spoof attacked, I would guess that you've got a lot of connections open that aren't serving anything and eventually timeout. You can accellerate the process by lowering timeout values that Apache uses, be careful though, or you'll lower them to the point that Apache is dropping legit connections to slow clients. Apache has a "Timeout" directive that controls how long idle connections hang around before it terminates them. The default is 5 minutes, which is probably overkill, and is most likely hurting you in this circumstance. Setting it to something more like 30 seconds or so should help keep your server on its feet without hurting legit connections. Then you need to contact your ISP and get the problem tracked down and stopped, there is no fix to this you can implement on your side 100%, and it's time to attack the attacker. I suggest you be more verbose with your description of the problem to them, though. They're going to want logs and other details about the attack, and frankly, I don't think anyone can help you any more without that information. I would suggest that you take some time to research attacks of this nature. There are plenty of sites about DoS attacks, and you should do some google searches and research how they work. >>-----Original Message----- >>From: Bill Moran [mailto:wmoran@potentialtech.com] >>Sent: Wednesday, May 01, 2002 6:52 PM >>To: Sulaiman A. Mirdad >>Cc: freebsd-questions@FreeBSD.ORG >>Subject: Re: Web server flood control? >> >> >>Sulaiman A. Mirdad wrote: >> >>>I am hosting a forums web site that contains none main stream ideas. The >>>result is that I a number of individuals have started flooding my web >>>server. >>> >>>I searched the web for a solution but was not successful. I >>> >>would greatly >> >>>appreciate it if you can let me know if you know of a solution. >>> >>Sure, spend more money, that always helps. >> >>You can't seriously think that anyone on this list can be of any help to >>you with as little information as you've provided? >>Depending on exactly which aspect of this "flooding" is bothering you >>will determine what kind of solution you need to take. If the server >>is overwhelmed, get a faster one. If the connection is full, get more >>bandwidth. If people are spamming the system, implement some sort of >>filters. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:39:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cyberion.pl (cyberion.pl [212.127.82.2]) by hub.freebsd.org (Postfix) with SMTP id 66D1B37B41A for ; Thu, 2 May 2002 06:39:39 -0700 (PDT) Received: (qmail 20307 invoked from network); 2 May 2002 13:37:26 -0000 Received: from pd77.poznan.sdi.tpnet.pl (HELO najl) (nailer@213.76.221.77) by cyberion.pl with SMTP; 2 May 2002 13:37:26 -0000 Message-ID: <002601bf53fa$2f118530$0200a8c0@najl> From: "najl" To: "freebsd help" Subject: help! Date: Sat, 1 Jan 2000 02:47:33 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Help me! During installation computer displays such error : > >panic: lockmgr: non-zero exclusive count > >syncing disks... panic: getnewbuf: locked buf >Uptime: 14m35s >Automatic reboot in 15 seconds - press a key on the console to abort. > I realy dont have any idea what could be wrong with my hardware - i checked hard disk but its ok. Help me please! Karol Bonenberg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:41: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 1DF0E37B420 for ; Thu, 2 May 2002 06:40:58 -0700 (PDT) Received: (from mwlucas@localhost) by blackhelicopters.org (8.11.6/8.11.6) id g42Detl98323; Thu, 2 May 2002 09:40:55 -0400 (EDT) (envelope-from mwlucas) Date: Thu, 2 May 2002 09:40:55 -0400 From: Michael Lucas To: Chris Griffiths Cc: FreeBSD-Questions Subject: Re: OpenOffice: Linux binary won't run Message-ID: <20020502094055.A98302@blackhelicopters.org> References: <20020502090411.A98157@blackhelicopters.org> <20020502091803.A14706@dca.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020502091803.A14706@dca.net>; from cgriffiths@dca.net on Thu, May 02, 2002 at 09:18:03AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [re: OO insisting that it needs to be repaired to run every time it's started] On Thu, May 02, 2002 at 09:18:03AM -0400, Chris Griffiths wrote: > Michael Lucas (mwlucas@blackhelicopters.org) wrote: > > I have OpenOffice installed, and keep running into this issue. > > Which version of OpenOffice are you running, I have OO 1.0 installed now > on a 4.5-stable machine running linux_base 6.1. I've tried 641D and 1.0, with the same results, under both linux_base6 and linux_base7. > > When I run soffice, I get a notice that "the script file is being > > read." Rather than opening a program, I get the "repair/deinstall" > > screen. > > Check to make sure that your .sversionrc is pointing towards your > install. My .sversionrc installs pointing to /shared/home/mwlucas/OpenOffice1.0, which is where my workstation install lives. I've tried editing it to point to the main install under /usr/local, but get a warning that it's already installed there -- as you might guess. :-) > Also I usually install OO or SO6 as root doing the following: > > # ./setup -net > > I then point my install to /usr/local/openoffice and install everything > there. > > When that is done I go back to my user and cd to the install directory > and run > > bash-2.05a$ ./setup > > as my user and install the network install which is about 4-5 megs for > OO in my home directory /home/useraccount/openoffice. I did exactly this. Thanks, Chris, but no dice. Anyone else have a suggestion? ==ml -- Michael Lucas mwlucas@FreeBSD.org, mwlucas@BlackHelicopters.org http://www.oreillynet.com/pub/q/Big_Scary_Daemons Absolute BSD: http://www.nostarch.com/abs_bsd.htm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 6:59:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from chaos.evolve.za.net (chaos.evolve.za.net [196.34.172.107]) by hub.freebsd.org (Postfix) with ESMTP id DDD7D37B404 for ; Thu, 2 May 2002 06:59:25 -0700 (PDT) Received: from amavis by chaos.evolve.za.net with scanned-ok (Exim 3.34 #1) id 173H76-0003p1-00 for freebsd-questions@FreeBSD.org; Thu, 02 May 2002 15:59:16 +0200 Received: from [192.168.0.56] (helo=DAVE) by chaos.evolve.za.net with smtp (Exim 3.34 #1) id 173H75-0003oq-00 for freebsd-questions@FreeBSD.org; Thu, 02 May 2002 15:59:15 +0200 Message-ID: <001b01c1f1e1$9d333900$3800a8c0@DAVE> From: "Dave Raven" To: Subject: PCMCIA brigde support Date: Thu, 2 May 2002 15:59:43 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Virus-Scanned: by Opteq - www.optec.co.za Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, I've been through LINT and noticed that all the PCMCIA -> PCCard drivers are for ISA cards. Is there any way I could get FreeBSD to pick up my PCI bridge card, external drivers or anything? Thanks in advance, Dave Raven. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:11:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id AD44337B404 for ; Thu, 2 May 2002 07:11:02 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id B2675A804; Fri, 3 May 2002 00:11:00 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id AF0ED542D; Fri, 3 May 2002 00:11:00 +1000 (EST) Date: Fri, 3 May 2002 00:11:00 +1000 (EST) From: Andrew To: agusri dodi Cc: freebsd-questions@FreeBSD.org Subject: Re: Billing for Internet Cafe In-Reply-To: <20020502102150.56184.qmail@web20609.mail.yahoo.com> Message-ID: <20020503001030.D25744-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002, agusri dodi wrote: > I have been running NET CAFE with BSD box as a > Gateway. Could you inform me the Intenet sites that > provide open source version of Net Cafe Billing ? > Thank fo reply Have you considered just using ipfw and wrting a script to grab the stats every now and then? Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:32:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.rdc-kc.rr.com (mkc-162-201.kc.rr.com [24.94.162.201]) by hub.freebsd.org (Postfix) with ESMTP id 8F7D237B420 for ; Thu, 2 May 2002 07:32:21 -0700 (PDT) Received: from bogart (mke-65-31-92-20.wi.rr.com [65.31.92.20]) by smtp2.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g42EWICF019731 for ; Thu, 2 May 2002 09:32:18 -0500 (CDT) Message-ID: <001c01c1f1e6$2d35fed0$145c1f41@bogart> From: "Nick Lozinsky" To: Subject: how to receive mail with mutt? Date: Thu, 2 May 2002 09:32:20 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've been bugging with this for a while, and still can't get it straight: how do I get mutt to receive mail directly to it? refreshing or checking the mailbox off of my ISP's mail server every few minutes (5-10). I have installed mutt and can send and receive mail while on the same box and messaging the users on the same box, but can't get my remote mail server's responses. I've tried to use fetchmail, and it does work, just doesn't stick it into the mutt folder, wherever it is; I have not tried using procmail, yet, as I can't get the basic mail system to function. Anyone, if you can clarify the steps of getting mutt to receive mail off of, let's say, mai.me.com (a pretend ISP's mail server), I will appreciate it a great deal. Thank you in advance. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:33:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from neptune.dbn.stormnet.co.za (neptune.dbn.stormnet.co.za [196.22.196.1]) by hub.freebsd.org (Postfix) with ESMTP id B7B9C37B404 for ; Thu, 2 May 2002 07:33:27 -0700 (PDT) Received: from postoffice.brabys.co.za ([192.96.48.13] helo=brabys.co.za) by neptune.dbn.stormnet.co.za with esmtp (Exim 3.34 #1) id 173HgR-0002ad-00 for freebsd-questions@freebsd.org; Thu, 02 May 2002 16:35:48 +0200 Received: from nelis.brabys.co.za (proxy-inner.brabys.co.za [192.96.48.11] (may be forged)) by brabys.co.za (8.12.0/8.12.0) with ESMTP id g42EWejr005622 for ; Thu, 2 May 2002 16:32:40 +0200 Message-Id: <5.1.0.14.2.20020502162908.0126c2d8@192.96.48.11> X-Sender: nelis@192.96.48.11 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 16:32:59 +0200 To: freebsd-questions@freebsd.org From: Nelis Lamprecht Subject: mrtg working through ipfw ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-MailScanner: Found to be clean X-Scanner: exiscan *173HgR-0002ad-00*QlXhIjAHoFk* http://duncanthrax.net/exiscan/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi I am trying to get mrtg to work through my firewall. I know snmp uses ports 161,162 tcp/udp but when i create a ruleset: allow udp from myip 161,162 to any in recv rl0 ..doesn't seem to work. any suggestions? thanks nelis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:34: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web11606.mail.yahoo.com (web11606.mail.yahoo.com [216.136.172.58]) by hub.freebsd.org (Postfix) with SMTP id D444B37B421 for ; Thu, 2 May 2002 07:33:46 -0700 (PDT) Message-ID: <20020502143346.66447.qmail@web11606.mail.yahoo.com> Received: from [209.173.121.232] by web11606.mail.yahoo.com via HTTP; Thu, 02 May 2002 07:33:46 PDT Date: Thu, 2 May 2002 07:33:46 -0700 (PDT) From: Michael Reynolds Subject: Re: Billing for Internet Cafe To: freebsd-questions@freebsd.org In-Reply-To: <20020503001030.D25744-100000@starbug.ugh.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > I have been running NET CAFE with BSD box as a > > Gateway. Could you inform me the Intenet sites that > > provide open source version of Net Cafe Billing ? > > Thank fo reply > > Have you considered just using ipfw and wrting a script to grab the stats > every now and then? I've done just that using a php script run via command line. Still working on how to save stats and restore them at reboot, since ipfw doesn't store the stats to disk. __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:35:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from neptune.dbn.stormnet.co.za (neptune.dbn.stormnet.co.za [196.22.196.1]) by hub.freebsd.org (Postfix) with ESMTP id 29C5737B400 for ; Thu, 2 May 2002 07:35:08 -0700 (PDT) Received: from postoffice.brabys.co.za ([192.96.48.13] helo=brabys.co.za) by neptune.dbn.stormnet.co.za with esmtp (Exim 3.34 #1) id 173HiF-0002h5-00 for freebsd-questions@freebsd.org; Thu, 02 May 2002 16:37:39 +0200 Received: from nelis.brabys.co.za (proxy-inner.brabys.co.za [192.96.48.11] (may be forged)) by brabys.co.za (8.12.0/8.12.0) with ESMTP id g42EYbjr005918 for ; Thu, 2 May 2002 16:34:37 +0200 Message-Id: <5.1.0.14.2.20020502163340.0126ab48@192.96.48.11> X-Sender: nelis@192.96.48.11 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 16:35:00 +0200 To: freebsd-questions@freebsd.org From: Nelis Lamprecht Subject: re: mrtg working through ipfw ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-MailScanner: Found to be clean X-Scanner: exiscan *173HiF-0002h5-00*zi6a2kxorwU* http://duncanthrax.net/exiscan/ Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG sorry...scratch the below message, it is working fine! :-) ______________________________________________________________ hi I am trying to get mrtg to work through my firewall. I know snmp uses ports 161,162 tcp/udp but when i create a ruleset: allow udp from myip 161,162 to any in recv rl0 ..doesn't seem to work. any suggestions? thanks nelis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:44:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id D3E6337B41F for ; Thu, 2 May 2002 07:44:46 -0700 (PDT) Received: from there (red-corb1-2003822-20.telnor.net [200.38.22.20]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVH00C58NR0N0@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 07:47:26 -0700 (PDT) Date: Thu, 02 May 2002 08:01:42 -0700 From: jehova Subject: Re: mouse code kernel In-reply-to: <20020502121246.0A35BBB29@i8k.babbleon.org> To: "Brian T.Schellenberger" Cc: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVH00C5ANR0N0@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 8BIT References: <0GVG00A9UVVBRZ@email.telnor.net> <20020502121246.0A35BBB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG El Jue 02 May 2002 05:12, escribió: > On Tuesday 30 April 2002 05:59 pm, jehova wrote: > | thanks for re: > | sorry for my english, i'm trying. > | > | when i draw a box (rectangle tool on gimp), if i do it quite > | slowly, i start my draw on place where i click and drag mouse > | pointer works fine. But if click and drag for draw a box > | faster my box is draw away from the place where it supose > | to be, something like one inch (depends on speed: faster > | more desplaced, slower draw near. if i want select a text > | (for example for cut and paste), slow or medium velocity > | works well, but if i speed up: start selection 2,3 4 or 6 > | characters later. this behavior happens with with TWM, KDE > | and XFCE and with every drawing program i've been tried > | (gimp, xpaint or whatever). > | > | i've been discard Xfree because versions 3.3.6, 4.1 and 4.2 > | do same on freebsd 4.4 and 4.5. nothing of this happen on > | linux this is why i think maybe is a kernel related issue. > > If you are running X anyway, then the simplest solution is > probably just to bypass the kernel mouse code entirely. > > Just change the mouse in your XF86Config from /dev/mouse to > dev//psm0 (for a PS/2 mouse, the most likely choice) or > whatever your real underlying mouse device is and restart X. > > Then you won't be using the the kernel-based "sysmouse" driver > at all, just X mouse support. i have 'moused' enabled on console with dev/psm0, then on XF86Config change device to dev/psm0, it did't work i need to add AllowMouseOpenFail to startx and neither works mouse. why change for bypass kernel mouse code device port? there are other ways to bypass?(!?) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:51:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from roc-66-66-72-6.rochester.rr.com (roc-66-66-72-6.rochester.rr.com [66.66.72.6]) by hub.freebsd.org (Postfix) with ESMTP id D484837B417 for ; Thu, 2 May 2002 07:51:27 -0700 (PDT) Received: by roc-66-66-72-6.rochester.rr.com (Postfix, from userid 1000) id 0ABEC901A00; Thu, 2 May 2002 10:50:59 -0400 (EDT) Date: Thu, 2 May 2002 10:50:59 -0400 From: mpd To: Nick Lozinsky Cc: freebsd-questions@FreeBSD.ORG Subject: Re: how to receive mail with mutt? Message-ID: <20020502105059.A28503@rochester.rr.com> References: <001c01c1f1e6$2d35fed0$145c1f41@bogart> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <001c01c1f1e6$2d35fed0$145c1f41@bogart>; from nl3481@wi.rr.com on Thu, May 02, 2002 at 09:32:20AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 09:32:20AM -0500, Nick Lozinsky wrote: > Hi, > > I've been bugging with this for a while, and still can't get it straight: > how do I get > mutt to receive mail directly to it? refreshing or checking the mailbox off > of my ISP's mail server every few minutes (5-10). I have installed mutt and Automatically, like via a timer? I don't think you can. That's what fetchmail is for. > can send and receive mail while on the same box and messaging the users on > the same box, but can't get my remote mail server's responses. > > I've tried to use fetchmail, and it does work, just doesn't stick it into > the mutt folder, wherever it is; Fetchmail uses your MTA to deliver mail. Check your MTA configuration. set spoolfile='/path/to/mailbox' (/var/mail/username by default.) Add that line to your .muttrc. > I have not tried using procmail, yet, as I > can't get the basic mail system to function. This isn't what procmail is for, anyway. > > Anyone, if you can clarify the steps of getting mutt to receive mail off of, > let's say, mai.me.com (a pretend ISP's mail server), I will appreciate it a > great deal. set pop_host="pop3.domain.com" set pop_user="username" set pop_pass="password" in .muttrc. Pressing 'G' within mutt will retrieve the mail. The usual caveats about putting passwords in textfiles apply. > > Thank you in advance. > > mike -- ___________________________________________________________ "POKEY I WANT TO BUY AN EIGHT FOOT TALL CRIME FIGHTING ROBOT!!" - Little Girl from "REQUEST DENIED THEN GRANTED" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 7:52: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe13.law12.hotmail.com [64.4.18.117]) by hub.freebsd.org (Postfix) with ESMTP id 1457E37B400 for ; Thu, 2 May 2002 07:51:58 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 07:51:57 -0700 X-Originating-IP: [216.228.133.13] From: "default" To: "FreeBSD-Questions" Subject: Date: Thu, 2 May 2002 09:51:58 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 14:51:57.0900 (UTC) FILETIME=[E887B8C0:01C1F1E8] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe freebsd-questions To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8: 1:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 7DECD37B417 for ; Thu, 2 May 2002 08:01:33 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173I5M-00004x-00 for ; Thu, 02 May 2002 16:01:32 +0100 Date: Thu, 2 May 2002 16:01:31 +0100 From: Daniel Bye To: freebsd-questions@FreeBSD.ORG Subject: Re: how to receive mail with mutt? Message-ID: <20020502150131.GA164@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <001c01c1f1e6$2d35fed0$145c1f41@bogart> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <001c01c1f1e6$2d35fed0$145c1f41@bogart> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 09:32:20AM -0500, Nick Lozinsky wrote: > Hi, > > I've been bugging with this for a while, and still can't get it straight: > how do I get > mutt to receive mail directly to it? refreshing or checking the mailbox off > of my ISP's mail server every few minutes (5-10). I have installed mutt and > can send and receive mail while on the same box and messaging the users on > the same box, but can't get my remote mail server's responses. > > I've tried to use fetchmail, and it does work, just doesn't stick it into > the mutt folder, wherever it is; I have not tried using procmail, yet, as I > can't get the basic mail system to function. > > Anyone, if you can clarify the steps of getting mutt to receive mail off of, > let's say, mai.me.com (a pretend ISP's mail server), I will appreciate it a > great deal. Hi, Mutt is a mail reader. It does not itself collect or deliver mail. You need to use fetchmail to collect mail from your ISP's server, then fetchmail can pass it to procmail, which in turn can process and filter it as you wish, and drop messages into a mailbox mutt can read. You need to tell fetchmail to pass any messages it collects to procmail, with this statement in your .fetchmailrc: poll mai.me.com with proto POP3 user 'you' there with password 'your_pw' is localname here mda /usr/local/bin/procmail ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ (Make sure you change localname to your local UNIX username for this to work!) Procmail will then get called for each message that comes in, and will be processed accordingly. HTH, Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8: 2:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spin.web.net (spin.web.net [192.139.37.16]) by hub.freebsd.org (Postfix) with ESMTP id 83DA637B41C for ; Thu, 2 May 2002 08:02:04 -0700 (PDT) Received: by spin.web.net (Postfix, from userid 1000) id 83E0912E631; Thu, 2 May 2002 11:02:03 -0400 (EDT) Date: Thu, 2 May 2002 11:02:03 -0400 From: Rob Ellis To: RichardH Cc: questions@FreeBSD.ORG Subject: Re: Parsing Log Files Message-ID: <20020502150203.GA84982@web.ca> References: <5.1.0.14.0.20020501192418.02cea050@pop.wsonline.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.0.20020501192418.02cea050@pop.wsonline.net> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Wed, May 01, 2002 at 07:29:29PM -0600, RichardH wrote: > By parsing out the files with a script, it reduces overall server load AND > permits the use of rewrite rules, that allow you to use a virtmap.txt type > of setup for hosting entries (in which case the transferlog entry does not > work at all). Assuming the domain name is the first thing on each log line, you could do something like #! /usr/bin/perl -w use FileCache; # opens/closes file descriptors as required no strict "refs"; # FileCache generates "strict refs" warnings $log = "/usr/local/apache/logs/access_log"; $outdir = "/usr/local/var/weblogs"; open(LOG, $log) || die $!; while () { if (/^([\w\.-]+)\s+/) { $domain = $1; $outfile = "$outdir/$domain/access_log"; die $! unless (cacheout $outfile); print $outfile $_; } # do something here with junk lines } close(LOG); 1; ? Not tested, but we do something similar. - Rob -- Rob Ellis System Administrator, Web Networks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8: 3: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id 4740637B426 for ; Thu, 2 May 2002 08:02:54 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.35.94]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Thu, 2 May 2002 11:01:25 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: FreeBSD Questions Subject: Kernel compile fails 4.5R Date: Thu, 2 May 2002 11:02:50 -0400 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <02050211025001.04136@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have installed 4.5 on my IBM TP and had 0 problems, recompiled several kernels using the old method, with 0 problems. I recently began building a file server to replace one running SuSE. Install goes well, no problems, all my fules copied well, no problems. Have been running the server for 10 days with 0 problems. Now I attempt to build a cuystom kernel, just to isolate th eprocessor (PP200) and get rid of stuff like SCSI and PCMCIA that I don't need. I cd /usr/src/sys/i386/conf cp GENERIC /root/kernels/GIZMO ln -s /root/kernels/GIZMO GIZMO vi GIZMO (make my changes) /usr/sbin/config GIZMO cd .. cd .. cd ./compile/GIZMO make depend (completes error free about 70% of the time, others out error code 1) (if make depend goes I will continue) make ( always fails, different messages EACH time. Sometimes talkling about white spaces in files?, other times talking about invalid pipes, or kernel panics?) Any ideas would be helpfull. ps I have never run a buildworld, or install world, I'm not sure I'm clear on what these are for.. Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:10:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21410.mail.yahoo.com (web21410.mail.yahoo.com [216.136.232.85]) by hub.freebsd.org (Postfix) with SMTP id 82EDC37B422 for ; Thu, 2 May 2002 08:10:20 -0700 (PDT) Message-ID: <20020502151020.98392.qmail@web21410.mail.yahoo.com> Received: from [67.113.61.118] by web21410.mail.yahoo.com via HTTP; Thu, 02 May 2002 08:10:20 PDT Date: Thu, 2 May 2002 08:10:20 -0700 (PDT) From: Culley Harrelson To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG unsubscribe __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:11:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.albacom.net (ns2.albacom.net [212.17.192.209]) by hub.freebsd.org (Postfix) with ESMTP id A5E5737B404 for ; Thu, 2 May 2002 08:11:17 -0700 (PDT) Received: from corsi ([217.220.8.1]) by ns2.albacom.net (8.9.3/8.9.3) with SMTP id RAA28088 for ; Thu, 2 May 2002 17:08:26 +0200 (MET DST) Message-ID: <000801c1f1ec$5a0d9520$6c08a8c0@corsi> From: "Andrea Corsi" To: Subject: Question Date: Thu, 2 May 2002 17:16:35 +0200 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1F1FD.1CF01300" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1F1FD.1CF01300 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I compiled my freebsd 4.1's (August 2000) kernel with IPX and NCP = options . I configure the network interface : ifconfig ifname ipx netnum where = netnum is IPX network number but I can't connect the Novell 4.11 server. Could you help me? = = Thank you Andrea Corsi ------=_NextPart_000_0005_01C1F1FD.1CF01300 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I compiled my freebsd 4.1's = (August=20 2000)  kernel with IPX and NCP options .
I configure the network interface : = ifconfig =20 ifname ipx netnum where netnum is IPX network number but I can't connect = the=20 Novell 4.11 server.
Could you help me?
 
 
          &nbs= p;            = ;            =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;            = ;            =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;        =20 Thank you Andrea Corsi
------=_NextPart_000_0005_01C1F1FD.1CF01300-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:14:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spin.web.net (spin.web.net [192.139.37.16]) by hub.freebsd.org (Postfix) with ESMTP id 74E7837B41B for ; Thu, 2 May 2002 08:14:37 -0700 (PDT) Received: by spin.web.net (Postfix, from userid 1000) id 331CF12E81C; Thu, 2 May 2002 11:14:38 -0400 (EDT) Date: Thu, 2 May 2002 11:14:38 -0400 From: Rob Ellis To: Nelis Lamprecht Cc: freebsd-questions@freebsd.org Subject: Re: firewall - ipfw rules Message-ID: <20020502151437.GB84982@web.ca> References: <5.1.0.14.2.20020502081544.013d6778@192.96.48.11> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.2.20020502081544.013d6778@192.96.48.11> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 08:30:07AM +0200, Nelis Lamprecht wrote: > Hi > > I am trying to create a custom ruleset for ipfw on a server that is > configured as a mail server and a web server. I have done all the necessary > steps to enable the firewall by compiling the kernel with relevant options > and also setting up the rc.conf to point to my ruleset. > I have also setup the rules to allow dns and certain icmp traffic for ping > and traceroute which is working fine. My box is configured with 2 nic's one > external and one internal ( 192.168.0.0 ) My problem is I can't seem to get > a rule working to except http to my webserver and this is what i have > created as a rule: > > add 00301 allow tcp from any to external-ip 80 > add 00302 allow tcp from any to external-ip 25 > add 00303 allow tcp from any to external-ip 110 > > *external-ip being the ip address of the external nic naturally ;-) > > this is either incorrect or I have forgotten something out in either the > ruleset or the rc.firewall file. > Can someone please give me an example of a ruleset for a web server and/or > mail server or explain to me what needs to be done? > Have you got rules allowing outbound traffic...? :-) You need to do something like ipfw add allow tcp from any to $myip 25 ipfw add allow tcp from $myip 25 to any or ipfw add allow tcp from any to any established ipfw add allow tcp from any to $myip 25 setup or ipfw add allow tcp from any to $myip 25 setup keep-state - rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:19: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 0AE4837B419 for ; Thu, 2 May 2002 08:19:05 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g42FHQU28598; Thu, 2 May 2002 11:17:26 -0400 Message-ID: <3CD159BA.2010609@potentialtech.com> Date: Thu, 02 May 2002 11:22:34 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.3) Gecko/20010914 X-Accept-Language: en-us MIME-Version: 1.0 To: tornadox@telnor.net Cc: "Brian T.Schellenberger" , freebsd-questions@FreeBSD.ORG Subject: Re: mouse code kernel References: <0GVG00A9UVVBRZ@email.telnor.net> <20020502121246.0A35BBB29@i8k.babbleon.org> <0GVH00C5ANR0N0@email.telnor.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG jehova wrote: > El Jue 02 May 2002 05:12, escribió: > >>On Tuesday 30 April 2002 05:59 pm, jehova wrote: >>| thanks for re: >>| sorry for my english, i'm trying. >>| >>| when i draw a box (rectangle tool on gimp), if i do it quite >>| slowly, i start my draw on place where i click and drag mouse >>| pointer works fine. But if click and drag for draw a box >>| faster my box is draw away from the place where it supose >>| to be, something like one inch (depends on speed: faster >>| more desplaced, slower draw near. if i want select a text >>| (for example for cut and paste), slow or medium velocity >>| works well, but if i speed up: start selection 2,3 4 or 6 >>| characters later. this behavior happens with with TWM, KDE >>| and XFCE and with every drawing program i've been tried >>| (gimp, xpaint or whatever). >>| >>| i've been discard Xfree because versions 3.3.6, 4.1 and 4.2 >>| do same on freebsd 4.4 and 4.5. nothing of this happen on >>| linux this is why i think maybe is a kernel related issue. >> >>If you are running X anyway, then the simplest solution is >>probably just to bypass the kernel mouse code entirely. >> >>Just change the mouse in your XF86Config from /dev/mouse to >>dev//psm0 (for a PS/2 mouse, the most likely choice) or >>whatever your real underlying mouse device is and restart X. >> >>Then you won't be using the the kernel-based "sysmouse" driver >>at all, just X mouse support. > > i have 'moused' enabled on console with dev/psm0, then on > XF86Config change device to dev/psm0, it did't work That's because it's wrong. If you use moused, your mouse device in X should be /dev/sysmouse If you're not using moused, X can connect to /dev/psm0, but both can't connect to /dev/psmo > i need to add > AllowMouseOpenFail to startx and neither works mouse. why change > for bypass kernel mouse code device port? there are other ways > to bypass?(!?) Just disable moused and configure X to use /dev/psm0, or enable moused and configure X to use /dev/sysmouse. Other combinations probably won't work. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:22:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from deimos.email.Arizona.EDU (deimos-adm.email.Arizona.EDU [128.196.133.166]) by hub.freebsd.org (Postfix) with ESMTP id DF5C237B41E for ; Thu, 2 May 2002 08:22:04 -0700 (PDT) Received: from SABINO (128.196.148.110) by deimos.email.Arizona.EDU (6.0.053) id 3CCB436100093986 for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 08:22:04 -0700 Reply-To: From: "William J Betush" To: Subject: restrictions? Date: Thu, 2 May 2002 08:22:08 -0700 Organization: University of Arizona Message-ID: <001101c1f1ed$1f929d90$6e94c480@SABINO> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0012_01C1F1B2.7333C590" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0012_01C1F1B2.7333C590 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit What are the restrictions, other than including the copyright and liability info, on using FreeBSD for a commercial product? Will. ------=_NextPart_000_0012_01C1F1B2.7333C590 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

What are the restrictions, other than including the copyright and liability info, on using FreeBSD for a commercial = product?

 

Will.

 

------=_NextPart_000_0012_01C1F1B2.7333C590-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:27:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id 6FC9C37B405 for ; Thu, 2 May 2002 08:27:21 -0700 (PDT) Received: from there (red-corb1-2003822-20.telnor.net [200.38.22.20]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVH00D73POYXG@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 08:29:24 -0700 (PDT) Date: Thu, 02 May 2002 08:43:40 -0700 From: jehova Subject: Re: mouse code kernel In-reply-to: <20020502145015.9A979BB29@i8k.babbleon.org> To: "Brian T.Schellenberger" Cc: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVH00D74POYXG@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 8BIT References: <0GVG00A9UVVBRZ@email.telnor.net> <0GVH00C5ANR0N0@email.telnor.net> <20020502145015.9A979BB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG El Jue 02 May 2002 07:50, escribió: > Oh, sorry, I forgot. > > You'll have to disable moused as well. > > By the way, do regular console windows have the same problem > with the mouse when you mark fast? This might be interesting > input . . . It works!!! thanks Brian, well now i dont have mouse enabled on console but in this machine i need X capabilities (my wife is graphic designer, she says hi and thank you). where can i find info about this solution? Ok, i follow your instructions, but i want to learn what i am doing. > | > | > | > | when i draw a box (rectangle tool on gimp), if i do it > | > | quite slowly, i start my draw on place where i click and > | > | drag mouse pointer works fine. But if click and drag for > | > | draw a box faster my box is draw away from the place > | > | where it supose to be, something like one inch (depends > | > | on speed: faster more desplaced, slower draw near. if i > | > | want select a text (for example for cut and paste), slow > | > | or medium velocity works well, but if i speed up: start > | > | selection 2,3 4 or 6 characters later. this behavior > | > | happens with with TWM, KDE and XFCE and with every > | > | drawing program i've been tried (gimp, xpaint or > | > | whatever). > | > | > | > | i've been discard Xfree because versions 3.3.6, 4.1 and > | > | 4.2 do same on freebsd 4.4 and 4.5. nothing of this > | > | happen on linux this is why i think maybe is a kernel > | > | related issue. > | > > | > If you are running X anyway, then the simplest solution is > | > probably just to bypass the kernel mouse code entirely. > | > > | > Just change the mouse in your XF86Config from /dev/mouse to > | > dev//psm0 (for a PS/2 mouse, the most likely choice) or > | > whatever your real underlying mouse device is and restart > | > X. > | > > | > Then you won't be using the the kernel-based "sysmouse" > | > driver at all, just X mouse support. > | > | i have 'moused' enabled on console with dev/psm0, then on > | XF86Config change device to dev/psm0, it did't work i need to > | add AllowMouseOpenFail to startx and neither works mouse. why > | change for bypass kernel mouse code device port? there are > | other ways to bypass?(!?) Thank you very much, see you on line _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:37: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web11601.mail.yahoo.com (web11601.mail.yahoo.com [216.136.172.53]) by hub.freebsd.org (Postfix) with SMTP id 3F87237B41B for ; Thu, 2 May 2002 08:36:58 -0700 (PDT) Message-ID: <20020502153658.68424.qmail@web11601.mail.yahoo.com> Received: from [209.173.121.232] by web11601.mail.yahoo.com via HTTP; Thu, 02 May 2002 08:36:58 PDT Date: Thu, 2 May 2002 08:36:58 -0700 (PDT) From: Michael Reynolds Subject: ipfw question(s?) To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have the following ipfw rules configured, so that any user in the group webusers may only connect out via http or ftp, but it seems to block them from connecting in via ftp. The inbound connections work fine, but they are unable to list via PORT or PASV. The last 2 rules, deny, are added to deny the users in the webusers group from accepting connections, or opening connections to other ports. This is because the httpd is run as a completely different user, thus no need to bind to any ports. Any/all help would be appreciated. Also, any help in compacting these rules into something 'smaller' would be even moreso appreciated. add 500 allow tcp from any to any 21 in via rl0 gid webusers add 500 allow tcp from any to any 21,80 out via rl0 gid webusers add 500 allow tcp from any 113 to any in via rl0 gid webusers add 500 allow tcp from any 113 to any out via rl0 gid webusers add 500 allow udp from any to any 53 out via rl0 gid webusers add 500 allow udp from any 53 to any in via rl0 gid webusers add 500 deny tcp from any to any via rl0 gid webusers add 500 deny udp from any to any via rl0 gid webusers __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 8:54:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 82B3037B41A for ; Thu, 2 May 2002 08:53:58 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173Itz-00007v-00 for ; Thu, 02 May 2002 16:53:51 +0100 Date: Thu, 2 May 2002 16:53:51 +0100 From: Daniel Bye To: freebsd-questions@freebsd.org Subject: Re: ipfw question(s?) Message-ID: <20020502155350.GA470@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@freebsd.org References: <20020502153658.68424.qmail@web11601.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020502153658.68424.qmail@web11601.mail.yahoo.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 08:36:58AM -0700, Michael Reynolds wrote: > I have the following ipfw rules configured, so that any user in > the group webusers may only connect out via http or ftp, but it > seems to block them from connecting in via ftp. The inbound > connections work fine, but they are unable to list via PORT or > PASV. The last 2 rules, deny, are added to deny the users in > the webusers group from accepting connections, or opening > connections to other ports. This is because the httpd is run > as a completely different user, thus no need to bind to any > ports. Any/all help would be appreciated. Also, any help in > compacting these rules into something 'smaller' would be even > moreso appreciated. > > add 500 allow tcp from any to any 21 in via rl0 gid webusers > add 500 allow tcp from any to any 21,80 out via rl0 gid webusers > add 500 allow tcp from any 113 to any in via rl0 gid webusers > add 500 allow tcp from any 113 to any out via rl0 gid webusers > add 500 allow udp from any to any 53 out via rl0 gid webusers > add 500 allow udp from any 53 to any in via rl0 gid webusers > add 500 deny tcp from any to any via rl0 gid webusers > add 500 deny udp from any to any via rl0 gid webusers Try changing the first statement in the rule to allow port 20 in - ftp uses 20 for control connections (ls, etc). You will also need to allow port 20 out (second statement). Alternatively, set up the clients to use passive ftp by default, which is a more secure way of doing things anyway, as it doesn't involve leaving a tcp port open for abuse from the outside world. The way the rule is written now, anyone outside will be able to connect to port 21 on any host in your network, which is probably not what you want. Of course, I am assuming that rl0 is the external interface... Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9: 1: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id 0B18437B419 for ; Thu, 2 May 2002 09:00:44 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 173J0Z-0006zQ-00; Thu, 02 May 2002 17:00:39 +0100 Date: Thu, 2 May 2002 17:00:39 +0100 From: Ceri Davies To: William J Betush Cc: freebsd-questions@FreeBSD.ORG Subject: Re: restrictions? Message-ID: <20020502160039.GA26656@submonkey.net> Mail-Followup-To: Ceri Davies , William J Betush , freebsd-questions@FreeBSD.ORG References: <001101c1f1ed$1f929d90$6e94c480@SABINO> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <001101c1f1ed$1f929d90$6e94c480@SABINO> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 08:22:08AM -0700, William J Betush wrote: > What are the restrictions, other than including the copyright and > liability info, on using FreeBSD for a commercial product? There aren't any. Honestly. I think it was Michael Lucas who summed up the BSD license best : 1) Don't claim you wrote this. 2) Don't sue the people who did. Be wary of code in src/contrib though, as it does not carry the same license. Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:10:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 605A737B405 for ; Thu, 2 May 2002 09:10:11 -0700 (PDT) Message-ID: <200205021612.g42GCd203034@ns.bsag.ch> Date: Thu, 2 May 2002 18:10:08 +0200 From: Hanspeter Roth To: freebsd-questions@freebsd.org Subject: port depending on old versions Reply-To: freebsd-questions@freebsd.org Mail-Followup-To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-H-S-Loop-Check-Ejzfr: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I'de like to install the tkcvs port which seems to depend on tcl-8.2.3_2 and tk-8.2.3. Tcl is already installed in version 8.3.3_4 and tk in version 8.3.3 When I want to run `make' in devel/tkcvs it starts downloading tk8.2.3. How can I install the `old' tkcvs port with the only the new versions of tcl and tk? -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:18:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kobayashi.cowlishaw.net (kobayashi.cowlishaw.net [216.138.96.93]) by hub.freebsd.org (Postfix) with ESMTP id 1DCCB37B417 for ; Thu, 2 May 2002 09:18:10 -0700 (PDT) Received: from kobayashi.cowlishaw.net (localhost.cowlishaw.net [127.0.0.1]) by kobayashi.cowlishaw.net (8.12.3/8.12.3) with ESMTP id g42G5wtd034670 for ; Thu, 2 May 2002 11:05:58 -0500 (CDT) (envelope-from jasonc@kobayashi.cowlishaw.net) X-Authentication-Warning: kobayashi.cowlishaw.net: Host localhost.cowlishaw.net [127.0.0.1] claimed to be kobayashi.cowlishaw.net Received: (from jasonc@localhost) by kobayashi.cowlishaw.net (8.12.3/8.12.3/Submit) id g42G5vAI034669 for freebsd-questions@freebsd.org; Thu, 2 May 2002 11:05:57 -0500 (CDT) (envelope-from jasonc) From: Jason Cowlishaw Message-Id: <200205021605.g42G5vAI034669@kobayashi.cowlishaw.net> Subject: D-Link USB Radio Control Program help To: freebsd-questions@freebsd.org Date: Thu, 2 May 2002 11:05:57 -0500 (CDT) X-Mailer: ELM [version 2.5 PL3] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG All, I have a D-Link dsbr100 USB radio and I see that 4.5 up has support for it, however, what program is anyone using to control it? It seems that NetBSD has a port, but not freebsd? can anyone point me in the general direction? Thanks, jasonc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:19: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id A853C37B41E for ; Thu, 2 May 2002 09:18:55 -0700 (PDT) Received: from sub21-156.member.dsl-only.net (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g42GOaC18797 for ; Thu, 2 May 2002 09:24:36 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Thu, 2 May 2002 09:24:35 -0700 From: Nathan Kinkade To: questions@FreeBSD.ORG Subject: Re: Parsing Log Files Message-Id: <20020502092435.4e263f34.nkinkade@dsl-only.com> In-Reply-To: <20020502150203.GA84982@web.ca> References: <5.1.0.14.0.20020501192418.02cea050@pop.wsonline.net> <20020502150203.GA84982@web.ca> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002 11:02:03 -0400 Rob Ellis wrote: > On Wed, May 01, 2002 at 07:29:29PM -0600, RichardH wrote: > > By parsing out the files with a script, it reduces overall server > > load AND permits the use of rewrite rules, that allow you to use a > > virtmap.txt type of setup for hosting entries (in which case the > > transferlog entry does not work at all). > > Assuming the domain name is the first thing on each log line, > you could do something like > > #! /usr/bin/perl -w > use FileCache; # opens/closes file descriptors as required > no strict "refs"; # FileCache generates "strict refs" warnings > $log = "/usr/local/apache/logs/access_log"; > $outdir = "/usr/local/var/weblogs"; > open(LOG, $log) || die $!; > while () { > if (/^([\w\.-]+)\s+/) { > $domain = $1; > $outfile = "$outdir/$domain/access_log"; > die $! unless (cacheout $outfile); > print $outfile $_; > } > # do something here with junk lines > } > close(LOG); > 1; Here are some snips from a small script that I put together to parse the apache log (/var/log/httpd-access.log) to find suspect log entries containing lame attempts to exploit IIS vulnerabilities. If found, it will try to send an email to "abuse" at whatever domain the user was at. It doesn't write anything to an output file, but it does selectively choose entries from the current date only. You could possibly modify this to append each days activities to each users log file. Again, the below doesn't necessarily speak to your particular problem, but maybe some tidbits of this could be a start, along with the post from Rob Ellis. #!/usr/bin/perl -w use strict; use Mail::Sendmail; my ($line, $host, $rcpt, $dstamp, $body); # some scalars my @date; # an array my (%mail, %offenders); # some hashes @date = split(" ", `date`); # get current date into an array$dstamp = "$date[2]/$date[1]/$date[5]"; # rearrange to match date in apache log file open (FILE, "/var/log/httpd-access.log"); # open log file for reading while ($line = ) { # find log entries from today that also contain mischevious keywords if ( (grep(/.*\[$dstamp:/, $line)) && (grep(/scripts|winnt|cmd\.exe|root\.exe|system32/, $line)) ) { $line =~ /^(\S+).*\[(.+)\].*GET\s(\S+)/; # parse interesting line $1=host $2=date/time $3=GET command push @{$offenders{$1}},"$2 $3\n"; # put values into a hash for later processing } } foreach $host (keys(%offenders)) { if ($host !~ /\.\d+$/) { # only act if $host is an actual host name to which we can construct an email $host =~ /^\S+\.(.*)$/; # get domain portion of $host $rcpt = $1; # assign $rcpt to value of previous regex $body = ( # create the email body "Email Body" ); %mail = ( # create some email headers 'Date' => Mail::Sendmail::time_to_date(), 'To' => "abuse\@$rcpt", 'From' => 'somebody@somewhere.org', 'Subject' => 'Notification of malicious user or system', 'Body' => "$body" ); sendmail(%mail); # send the mail } } close (FILE); # close the file log file To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:31:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id BDC8B37B417 for ; Thu, 2 May 2002 09:31:06 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g42GXZW03554 for ; Thu, 2 May 2002 18:33:35 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g42GXZU03550 for ; Thu, 2 May 2002 18:33:35 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g42GV5118916 for ; Thu, 2 May 2002 18:31:05 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g42GV5o33278 for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 18:31:05 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Thu, 2 May 2002 18:31:05 +0200 From: Hanspeter Roth To: FreeBSD Questions Subject: Re: Kernel compile fails 4.5R Message-ID: <20020502183105.A33254@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: FreeBSD Questions References: <02050211025001.04136@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <02050211025001.04136@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 11:02:50AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 11:02, Michael W.Holdeman spoke: > ps I have never run a buildworld, or install world, I'm not sure I'm clear on > what these are for.. You don't realy need this after a fresh install. You should be able to build a custom kernel without buildworld. You may need buildworld/installworld after you upgrade the source of the base system (to 4.5stable). -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:32: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.volja.net (volja-64-35.volja.net [217.72.64.35]) by hub.freebsd.org (Postfix) with ESMTP id 2CCAB37B429 for ; Thu, 2 May 2002 09:31:47 -0700 (PDT) Received: from vo121-72.dial-up.volja.net (vo121-72.dial-up.volja.net [217.72.72.121]) by smtp2.volja.net (Postfix) with ESMTP id AAAB2538FC for ; Thu, 2 May 2002 18:30:43 +0200 (CEST) Date: Thu, 2 May 2002 18:29:09 +0200 (CEST) From: PiraniEnrico X-X-Sender: root@ To: questions@FreeBSD.org Subject: Panic Kernel with Compaq USB Keyboard Message-ID: <20020502182828.G353-100000@> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Sir, I've installed FreeBSD 4.5 on Compaq 4000EA (AMD Duron 900Mhz 300Mb Ram Ati Radeon 7000 USB Keyboard). After rebooting the system I get panic:page fault. Exactly the messages are : Fatal trap 12: page fault while in kernel mode fault virtual addfress = 0X1 fault code =supervisor read, page not present instruction pointer =0X8:0Xc01bd8ef stack pointer =0x10:0xc04b8f6c frame pointer = 0x10:0xc04b8f88 code segment = base 0x0, limit 0xffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swaper) interrupt mask = net tty bio cam trap number = 12 panic: page fault If I unplug the keyboard the kernel loads without problem till the login (of course after i cannot use anymore the keyboard). Are you so kind to give some advice?. Enrico Pirani Trieste (ITALY) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:32:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web10002.mail.yahoo.com (web10002.mail.yahoo.com [216.136.130.38]) by hub.freebsd.org (Postfix) with SMTP id 3C79037B400 for ; Thu, 2 May 2002 09:32:27 -0700 (PDT) Message-ID: <20020502163224.78261.qmail@web10002.mail.yahoo.com> Received: from [68.15.191.99] by web10002.mail.yahoo.com via HTTP; Thu, 02 May 2002 09:32:24 PDT Date: Thu, 2 May 2002 09:32:24 -0700 (PDT) From: Tom Kersten Subject: QT3 installation problem (from ports) To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am having trouble installing Qt-3.0 from the ports. I can't figure out why, here is my output, any help is appreciated. Let me know if you need more information, I am unsure of what else to include at this point. Thanks, Thomas Kersten reults from "make install && make clean" in the /usr/ports/x11-toolkits/qt30 directory: gmake[1]: Leaving directory `/usr/ports/x11-toolkits/qt30/work/qt-x11-free-3.0.3 /src/moc' cd src && gmake gmake[1]: Entering directory `/usr/ports/x11-toolkits/qt30/work/qt-x11-free-3.0. 3/src' g++ -c -pipe -fno-exceptions -I/usr/local/include -Wall -W -g -pthread -D_THREAD _SAFE -fPIC -DQT_SHARED -DQT_THREAD_SUPPORT -DQT_THREAD_SUPPORT -DQT_NO_NIS -DQT _BUILTIN_GIF_READER=1 -DQT_NO_STYLE_AQUA -DQT_NO_STYLE_MAC -DQT_NO_STYLE_INTERLA CE -DQT_NO_STYLE_COMPACT -I/usr/local/include/freetype2 -I/usr/local/include -I/ usr/ports/x11-toolkits/qt30/work/qt-x11-free-3.0.3/include -I/usr/X11R6/include -I.moc/debug-mt/ -I/usr/ports/x11-toolkits/qt30/work/qt-x11-free-3.0.3/mkspecs/f reebsd-g++ -o .obj/debug-mt/qapplication_x11.o kernel/qapplication_x11.cpp In file included from kernel/qt_x11.h:143, from kernel/qinputcontext_p.h:5, from kernel/qapplication_x11.cpp:77: /usr/X11R6/include/X11/Xft/XftFreetype.h:34: syntax error before `;' /usr/X11R6/include/X11/Xft/XftFreetype.h:37: syntax error before `;' /usr/X11R6/include/X11/Xft/XftFreetype.h:41: syntax error before `;' /usr/X11R6/include/X11/Xft/XftFreetype.h:54: syntax error before `;' /usr/X11R6/include/X11/Xft/XftFreetype.h:71: syntax error before `,' gmake[1]: *** [.obj/debug-mt/qapplication_x11.o] Error 1 gmake[1]: Leaving directory `/usr/ports/x11-toolkits/qt30/work/qt-x11-free-3.0.3 /src' gmake: *** [sub-src] Error 2 *** Error code 2 Stop in /usr/ports/x11-toolkits/qt30. __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:33:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.smed.com (mail.smed.com [64.46.248.225]) by hub.freebsd.org (Postfix) with ESMTP id 6FC8F37B405 for ; Thu, 2 May 2002 09:33:01 -0700 (PDT) Received: from smtpgate.smshsc.net (unknown [165.226.204.25]) by mail.smed.com (Postfix) with ESMTP id B973547FFE for ; Thu, 2 May 2002 12:32:50 -0400 (EDT) Received: from iesa14.smshsc.net (iesa14.smshsc.net [165.226.204.44]) by smtpgate.smshsc.net (8.11.6/8.11.6) with ESMTP id g42GWog11013 for ; Thu, 2 May 2002 12:32:50 -0400 Received: from mlvexc01.smshsc.net (unverified) by iesa14.smshsc.net (Content Technologies SMTPRS 2.0.15) with ESMTP id for ; Thu, 02 May 2002 12:10:05 -0400 Received: by mlvexc01.usmlvv1p0a.smshsc.net with Internet Mail Service (5.5.2655.55) id <2X3CNLT8>; Thu, 2 May 2002 12:09:30 -0400 Message-Id: From: Warner Joseph To: "'FreeBSD-Questions@freebsd.org'" Subject: Backing Up FreeBSD with ArcServe Date: Thu, 2 May 2002 12:09:59 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C1F1F3.CF209310" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C1F1F3.CF209310 Content-Type: text/plain; charset="iso-8859-1" Is there anyone out there using ARCserve to backup FreeBSD? We have ARCserve running on a W2K server in conjunction with a Compaq DLT library system to get backups of all our W2K and NT servers. I should be able to install an agent on our FreeBSD (4.5 -STABLE) server and get backups of it as well but I don't know which agent we need. If anyone is using ARCserve to backup their FreeBSD boxen, a response would be much appreciated. Thanks Joe Warner | Operations Technical Analyst II | Siemens Health Services | 215 N. Admiral Byrd Road | Salt Lake City, UT 84116 | Ph: 801-539-4978 | Fax: 801-533-8004 | Joe.Warner@smed.com ------------------------------------------------------------------------------- This message and any included attachments are from Siemens Medical Solutions Health Services Corporation and are intended only for the addressee(s). The information contained herein may include trade secrets or privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you received this message in error, or have reason to believe you are not authorized to receive it, please promptly delete this message and notify the sender by e-mail with a copy to CSOffice@smed.com. Thank you ------_=_NextPart_001_01C1F1F3.CF209310 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Is = there anyone out=20 there using ARCserve to backup FreeBSD?
 
We = have ARCserve=20 running on a W2K server in conjunction with
a = Compaq DLT library=20 system to get backups of all our W2K and
NT = servers.  I=20 should be able to install an agent on our FreeBSD
(4.5 = -STABLE) server=20 and get backups of it as well but I don't
know = which agent we=20 need.
 
If = anyone is using=20 ARCserve to backup their FreeBSD boxen, a
response would be=20 much appreciated.
 
Thanks
 
 
 

Joe=20 Warner | Operations Technical Analyst II | Siemens Health Services | = 215 N.=20 Admiral Byrd Road | Salt Lake City, UT 84116  | Ph: 801-539-4978 | Fax: = 801-533-8004 |=20 Joe.Warner@smed.com

 
------_=_NextPart_001_01C1F1F3.CF209310-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:34:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id E7BC837B404 for ; Thu, 2 May 2002 09:34:42 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.35.94]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Thu, 2 May 2002 12:33:14 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: FreeBSD Questions Subject: MCA Date: Thu, 2 May 2002 12:34:39 -0400 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <02050212343904.04136@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG According to the handbook FreeBSD 4.5 supports MCA. Is this correct? any special requirements, is it in the 4.5 install CD? Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:39: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id 6E9FA37B405 for ; Thu, 2 May 2002 09:38:55 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.35.94]) by (Vircom SMTPRS 4.2.181) with SMTP id ; Thu, 2 May 2002 12:37:26 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Date: Thu, 2 May 2002 12:38:51 -0400 X-Mailer: KMail [version 1.2] References: <02050211025001.04136@fcoffice.ptfd.org> <20020502183105.A33254@bsag.ch> In-Reply-To: <20020502183105.A33254@bsag.ch> Cc: MIME-Version: 1.0 Message-Id: <02050212385105.04136@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I see, so the makeworld and installworld are for use after upgrading like for instance ot 4.5 or 5.0? Mike On Thursday 02 May 2002 12:31, you wrote: > On May 02 at 11:02, Michael W.Holdeman spoke: > > ps I have never run a buildworld, or install world, I'm not sure I'm > > clear on what these are for.. > > You don't realy need this after a fresh install. > You should be able to build a custom kernel without buildworld. > You may need buildworld/installworld after you upgrade the > source of the base system (to 4.5stable). > > -Hanspeter > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:45:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id A711937B416 for ; Thu, 2 May 2002 09:45:14 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g42Glha03887 for ; Thu, 2 May 2002 18:47:43 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g42GlfU03883 for ; Thu, 2 May 2002 18:47:42 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g42GjB119340 for ; Thu, 2 May 2002 18:45:11 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g42GjBC33354 for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 18:45:11 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Thu, 2 May 2002 18:45:11 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Message-ID: <20020502184511.A33337@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <02050211025001.04136@fcoffice.ptfd.org> <20020502183105.A33254@bsag.ch> <02050212385105.04136@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <02050212385105.04136@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 12:38:51PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 12:38, Michael W.Holdeman spoke: > I see, so the makeworld and installworld are for use after upgrading like for > instance ot 4.5 or 5.0? Yes. But also after source upgrade on the 4.5Stable branch. Some userland programs (like ps) may become incompatible with the new kernel version and thus needs to be upgraded too. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:50:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from proxy.wn.net.ua (proxy.wn.net.ua [217.20.160.163]) by hub.freebsd.org (Postfix) with ESMTP id 193E937B419 for ; Thu, 2 May 2002 09:50:30 -0700 (PDT) Received: from 10.0.0.2 (home3-gw.WN.net.UA [217.20.161.78]) by proxy.wn.net.ua (8.11.6/8.11.6) with ESMTP id g42GoOP15056 for ; Thu, 2 May 2002 19:50:26 +0300 (EEST) (envelope-from don_oles@bigfoot.com) Date: Thu, 2 May 2002 19:51:30 +0300 From: Oles Hnatkevych X-Mailer: The Bat! (v1.53bis) Reply-To: Oles Hnatkevych X-Priority: 3 (Normal) Message-ID: <1347873929.20020502195130@bigfoot.com> To: freebsd-questions@freebsd.org Subject: creating tun device MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello! How do I create tun device on purpose without running some other program that will open it? -- Oles mailto:don_oles@bigfoot.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:55:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id AA05537B41B for ; Thu, 2 May 2002 09:55:17 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g42GvkG04117 for ; Thu, 2 May 2002 18:57:46 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g42GvkU04113 for ; Thu, 2 May 2002 18:57:46 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g42GtG119588 for ; Thu, 2 May 2002 18:55:16 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g42GtG533403 for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 18:55:16 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Thu, 2 May 2002 18:55:16 +0200 From: Hanspeter Roth To: FreeBSD Questions Subject: Re: Kernel compile fails 4.5R Message-ID: <20020502185516.B33337@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: FreeBSD Questions References: <02050211025001.04136@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <02050211025001.04136@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 11:02:50AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 11:02, Michael W.Holdeman spoke: > make depend (completes error free about 70% of the time, others out error > code 1) > (if make depend goes I will continue) > make ( always fails, different messages EACH time. Sometimes talkling about > white spaces in files?, other times talking about invalid pipes, or kernel > panics?) Is there anything suspicious in `dmesg` or /var/log/messages? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 9:58:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe21.law12.hotmail.com [64.4.18.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E67537B416 for ; Thu, 2 May 2002 09:58:17 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 09:58:17 -0700 X-Originating-IP: [216.228.133.13] From: "default" To: "FreeBSD-Questions" Subject: Restricting PS Use Date: Thu, 2 May 2002 11:58:14 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 16:58:17.0072 (UTC) FILETIME=[8E119700:01C1F1FA] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I have been trying to get this working for a long time to no avail, but... Basically I need to restrict the PS command so that normal users are only able to see their own processes... I would appreciate any suggestion on how to do this... Thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10: 0: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe47.law12.hotmail.com [64.4.18.19]) by hub.freebsd.org (Postfix) with ESMTP id 1C2B837B427 for ; Thu, 2 May 2002 09:59:41 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 09:59:41 -0700 X-Originating-IP: [216.228.133.13] From: "default" To: "FreeBSD-Questions" Subject: Symlinks in FTP using ftpchroot Date: Thu, 2 May 2002 11:59:39 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 16:59:41.0557 (UTC) FILETIME=[C06CFA50:01C1F1FA] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Is there any way to get symlinks that link to a directory below a user's home directory to work in a ftpchrooted environment? Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10: 5: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 4998B37B42C for ; Thu, 2 May 2002 10:04:33 -0700 (PDT) Received: from sub21-156.member.dsl-only.net (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g42HA5C18847; Thu, 2 May 2002 10:10:10 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Thu, 2 May 2002 10:10:05 -0700 From: Nathan Kinkade To: Oles Hnatkevych Cc: freebsd-questions@freebsd.org Subject: Re: creating tun device Message-Id: <20020502101005.37d8a516.nkinkade@dsl-only.com> In-Reply-To: <1347873929.20020502195130@bigfoot.com> References: <1347873929.20020502195130@bigfoot.com> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002 19:51:30 +0300 Oles Hnatkevych wrote: > Hello! > > How do I create tun device on purpose without > running some other program that will open it? Read: 16.2.1.3 Check the tun Device From: http://www.freebsd.org/handbook/userppp.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10: 6:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id BB49D37B419 for ; Thu, 2 May 2002 10:04:53 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 186679.359040.1020.1s6386747sheridan ; Thu, 02 May 2002 19:04:00 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Warner Joseph , "'FreeBSD-Questions@freebsd.org'" Subject: Re: Backing Up FreeBSD with ArcServe Date: Thu, 2 May 2002 19:04:46 +0200 X-Mailer: KMail [version 1.4] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200205021904.46786.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday 02 May 2002 6:09 pm, Warner Joseph wrote: > Is there anyone out there using ARCserve to backup FreeBSD? > > We have ARCserve running on a W2K server in conjunction with > a Compaq DLT library system to get backups of all our W2K and > NT servers. I should be able to install an agent on our FreeBSD > (4.5 -STABLE) server and get backups of it as well but I don't > know which agent we need. > > If anyone is using ARCserve to backup their FreeBSD boxen, a > response would be much appreciated. > could try the Microsoft Services for Unix product and nfs mount the freeb= sd=20 box or use samba on the freebsd box (which I have tested with using Back= up=20 Exec) =20 whatever you choose to do....make sure you have a bootable disk / cd of s= ome=20 variety for the 'bsd box so you can get it to the stage where you can=20 actually restore files!. Oh and actually test that you can restore files. > > > > > Joe Warner | Operations Technical Analyst II | Siemens Health Services = | > 215 N. Admiral Byrd Road | Salt Lake City, UT 84116 | Ph: 801-539-4978= | > Fax: 801-533-8004 | Joe.Warner@smed.com > > > > > > > -----------------------------------------------------------------------= ---- >---- This message and any included attachments are from Siemens Medical > Solutions Health Services Corporation and are intended only for the > addressee(s). The information contained herein may include trade secret= s or > privileged or otherwise confidential information. Unauthorized review, > forwarding, printing, copying, distributing, or using such information = is > strictly prohibited and may be unlawful. If you received this message = in > error, or have reason to believe you are not authorized to receive it, > please promptly delete this message and notify the sender by e-mail wit= h a > copy to CSOffice@smed.com. Thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10: 6:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 4397B37B41F for ; Thu, 2 May 2002 10:04:54 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by mail.broadpark.no (Postfix) with ESMTP id 51A3F7E90 for ; Thu, 2 May 2002 19:04:53 +0200 (MEST) Received: from 217.13.29.51 ( [217.13.29.51]) as user johann@mail.broadpark.no by mail.broadpark.no with HTTP; Thu, 2 May 2002 19:04:53 +0200 Message-ID: <1020359093.3cd171b535673@mail.broadpark.no> Date: Thu, 2 May 2002 19:04:53 +0200 From: johann@broadpark.no To: questions@freebsd.org Subject: WINE + InstallShield Wizard MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1;q=1.0 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 X-Originating-IP: 217.13.29.51 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I'm trying to install Business Plan Pro 2002 using WINE. It doesn't seem to work, however. Here's why: mybox# wine --winver win98 --managed bpp2002setup.exe [18:59] Could not stat /mnt/fd0 (No such file or directory), ignoring drive A: Could not stat /cdrom (No such file or directory), ignoring drive D: fixme:win32:PE_CreateModule Security directory ignored fixme:reg:GetSystemInfo not yet supported on this system fixme:module:CreateProcessA (C:\windows\system\msiexec.exe,...): NORMAL_PRIORITY_CLASS ignored Could not stat /mnt/fd0 (No such file or directory), ignoring drive A: Could not stat /cdrom (No such file or directory), ignoring drive D: fixme:reg:GetSystemInfo not yet supported on this system fixme:ntdll:NtOpenThreadToken (0xfffffffe,0x0000000f,0x00000001,0x288f2b24): stub file_set_error: Bad address file_set_error: Bad address This is where it stops. Now I really need this application =} Unfortunately I don't have Windows nor do I have a 2nd harddrive to waste power on. Repartitioning my existing FreeBSD HDD ... is that at all possible? Thanks. Regards, -- Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:11:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail7.nc.rr.com (mail7.southeast.rr.com [24.93.67.54]) by hub.freebsd.org (Postfix) with ESMTP id E235137B419 for ; Thu, 2 May 2002 10:11:18 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail7.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Thu, 2 May 2002 13:11:07 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id EC819BB29; Thu, 2 May 2002 13:11:02 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: "default" , "FreeBSD-Questions" Subject: Re: Restricting PS Use Date: Thu, 2 May 2002 13:11:02 -0400 X-Mailer: KMail [version 1.3] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020502171102.EC819BB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday 02 May 2002 12:58 pm, default wrote: | Hello, | | I have been trying to get this working for a long time to no avail, but... | | Basically I need to restrict the PS command so that normal users are only | able to see their own processes... | | I would appreciate any suggestion on how to do this... | - create a "ps" userid - restrict ps so that only "PS" can execute it (root will be able to anyay). - create a new ps command, probably just as a perl script, in /usr/local/bin - make the perl script suid to the new "ps" id. - Have the perl script execute ps and filter out the records you don't want. You can now restrict ps in any way you desire. | Thank you | | To Unsubscribe: send mail to majordomo@FreeBSD.org | with "unsubscribe freebsd-questions" in the body of the message -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:16:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from boris.st.hmc.edu (boris.ST.HMC.Edu [134.173.63.11]) by hub.freebsd.org (Postfix) with ESMTP id BE04137B432 for ; Thu, 2 May 2002 10:16:22 -0700 (PDT) Received: from localhost (jeff@localhost) by boris.st.hmc.edu (8.11.6/8.11.6) with ESMTP id g42HGBL21473; Thu, 2 May 2002 10:16:12 -0700 (PDT) (envelope-from jeff@boris.st.hmc.edu) Date: Thu, 2 May 2002 10:16:11 -0700 (PDT) From: Jeff To: "Brian T.Schellenberger" Cc: default , FreeBSD-Questions Subject: Re: Restricting PS Use In-Reply-To: <20020502171102.EC819BB29@i8k.babbleon.org> Message-ID: <20020502101331.O20800-100000@boris.st.hmc.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002, Brian T.Schellenberger wrote: > On Thursday 02 May 2002 12:58 pm, default wrote: > | Hello, > | > | I have been trying to get this working for a long time to no avail, but... > | > | Basically I need to restrict the PS command so that normal users are only > | able to see their own processes... > | > | I would appreciate any suggestion on how to do this... > | > > - create a "ps" userid > - restrict ps so that only "PS" can execute it (root will be able to anyay). > - create a new ps command, probably just as a perl script, in /usr/local/bin > - make the perl script suid to the new "ps" id. > - Have the perl script execute ps and filter out the records you don't want. > > You can now restrict ps in any way you desire. > > Or, check sysctl kern.ps_showallprocs (more specifically, set it to zero) ... man 1 ps would have told you the same thing. - Jeff ============== Jeff Jirsa HMC Unix Admin jjirsa@hmc.edu ============== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:28:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f160.law12.hotmail.com [64.4.19.160]) by hub.freebsd.org (Postfix) with ESMTP id 3D34037B417 for ; Thu, 2 May 2002 10:28:42 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 10:28:42 -0700 Received: from 216.228.133.13 by lw12fd.law12.hotmail.msn.com with HTTP; Thu, 02 May 2002 17:28:41 GMT X-Originating-IP: [216.228.133.13] From: "default013 subscriptions" To: jeff@boris.st.hmc.edu Cc: freebsd-questions@freebsd.org Subject: Re: Restricting PS Use Date: Thu, 02 May 2002 12:28:41 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 02 May 2002 17:28:42.0170 (UTC) FILETIME=[CDE971A0:01C1F1FE] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I wish I could do the sysctl thing, but I am using FreeBSD 4.1 ... Apparently there is no setting for that in my distribution. I will give the other way a shot, but... am I right in assuming that I won't be able to use the sysctl answer? ... I wonder if I could just upgrade sysctl... Thanks >From: Jeff >To: "Brian T.Schellenberger" >CC: default , FreeBSD-Questions > >Subject: Re: Restricting PS Use >Date: Thu, 2 May 2002 10:16:11 -0700 (PDT) >MIME-Version: 1.0 >Received: from [134.173.63.11] by hotmail.com (3.2) with ESMTP id >MHotMailBE9ABF4E00A24136E85186AD3F0B0A870; Thu, 02 May 2002 10:15:58 -0700 >Received: from localhost (jeff@localhost)by boris.st.hmc.edu >(8.11.6/8.11.6) with ESMTP id g42HGBL21473;Thu, 2 May 2002 10:16:12 -0700 >(PDT)(envelope-from jeff@boris.st.hmc.edu) >From jeff@boris.st.hmc.edu Thu, 02 May 2002 10:16:43 -0700 >In-Reply-To: <20020502171102.EC819BB29@i8k.babbleon.org> >Message-ID: <20020502101331.O20800-100000@boris.st.hmc.edu> > > > >On Thu, 2 May 2002, Brian T.Schellenberger wrote: > > > On Thursday 02 May 2002 12:58 pm, default wrote: > > | Hello, > > | > > | I have been trying to get this working for a long time to no avail, >but... > > | > > | Basically I need to restrict the PS command so that normal users are >only > > | able to see their own processes... > > | > > | I would appreciate any suggestion on how to do this... > > | > > > > - create a "ps" userid > > - restrict ps so that only "PS" can execute it (root will be able to >anyay). > > - create a new ps command, probably just as a perl script, in >/usr/local/bin > > - make the perl script suid to the new "ps" id. > > - Have the perl script execute ps and filter out the records you don't >want. > > > > You can now restrict ps in any way you desire. > > > > > >Or, check sysctl kern.ps_showallprocs (more specifically, set it to >zero) ... man 1 ps would have told you the same thing. > >- Jeff > >============== >Jeff Jirsa >HMC Unix Admin >jjirsa@hmc.edu >============== > _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:40:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailhub.yumyumyum.org (dsl092-171-091.wdc1.dsl.speakeasy.net [66.92.171.91]) by hub.freebsd.org (Postfix) with SMTP id D393D37B400 for ; Thu, 2 May 2002 10:40:14 -0700 (PDT) Received: (qmail 97928 invoked from network); 2 May 2002 17:39:02 -0000 Received: from dsl092-171-091.wdc1.dsl.speakeasy.net (66.92.171.91) by dsl092-171-091.wdc1.dsl.speakeasy.net with SMTP; 2 May 2002 17:39:02 -0000 Date: Thu, 2 May 2002 13:39:02 -0400 (EDT) From: Kenneth Culver To: johann@broadpark.no Cc: questions@FreeBSD.ORG Subject: Re: WINE + InstallShield Wizard In-Reply-To: <1020359093.3cd171b535673@mail.broadpark.no> Message-ID: <20020502133758.Q97897-100000@alpha.yumyumyum.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This isn't possible with wine... however I'm working on getting the linux winex working under freebsd, and I've managed to get several programs that use the installshield stuff to work. Ken On Thu, 2 May 2002 johann@broadpark.no wrote: > Hi. > > I'm trying to install Business Plan Pro 2002 using WINE. > > It doesn't seem to work, however. Here's why: > > mybox# wine --winver win98 --managed bpp2002setup.exe > [18:59] > Could not stat /mnt/fd0 (No such file or directory), ignoring drive A: > Could not stat /cdrom (No such file or directory), ignoring drive D: > fixme:win32:PE_CreateModule Security directory ignored > fixme:reg:GetSystemInfo not yet supported on this system > fixme:module:CreateProcessA (C:\windows\system\msiexec.exe,...): > NORMAL_PRIORITY_CLASS ignored > Could not stat /mnt/fd0 (No such file or directory), ignoring drive A: > Could not stat /cdrom (No such file or directory), ignoring drive D: > fixme:reg:GetSystemInfo not yet supported on this system > fixme:ntdll:NtOpenThreadToken > (0xfffffffe,0x0000000f,0x00000001,0x288f2b24): stub > file_set_error: Bad address > file_set_error: Bad address > > This is where it stops. Now I really need this application =} > > Unfortunately I don't have Windows nor do I have a 2nd harddrive to waste > power on. Repartitioning my existing FreeBSD HDD ... is that at all > possible? > > Thanks. > > Regards, > -- Johann > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:45: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from speicher.org (sirius.speicher.org [209.74.10.51]) by hub.freebsd.org (Postfix) with ESMTP id 0E6C237B404 for ; Thu, 2 May 2002 10:45:02 -0700 (PDT) Received: from localhost (geoff@localhost) by speicher.org (8.11.6/8.11.6) with ESMTP id g42HkoY42426 for ; Thu, 2 May 2002 13:46:50 -0400 (EDT) (envelope-from geoff@speicher.org) Date: Thu, 2 May 2002 13:46:50 -0400 (EDT) From: "Geoffrey C. Speicher" To: freebsd-questions@FreeBSD.ORG Subject: concurrent pw(8) corrupts master.passwd sometimes? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ``Sometimes'' being the operative word. I am not able to reliably reproduce it, but it sure does happen. I don't know for sure that it is the fault of pw, but that's what I'm trying to determine. Here's the scenario: a user visits a web site and fills out a form to create an account with the site. When they press submit, a record is inserted into a database table holding their account information. This triggers a call to 'pw adduser ...' on the local machine so they have a home directory to store files and a personal email account. Usually it works fine, but under some circumstances master.passwd is left short, sometimes in the middle of a record. Anyone have any ideas that might save me some time while I'm looking at the pw sources? I'm starting to wonder if I should run 'nohup pw adduser ...'. (Please CC me on reply.) Thanks, Geoff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:46: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from email.telnor.net (email.telnor.net [200.23.249.11]) by hub.freebsd.org (Postfix) with ESMTP id 5B0C437B417 for ; Thu, 2 May 2002 10:45:56 -0700 (PDT) Received: from there (red-corb1-2003822-20.telnor.net [200.38.22.20]) by email.telnor.net (Sun Internet Mail Server sims.4.0.2001.07.26.11.50.p9) with SMTP id <0GVH00HP1VY75C@email.telnor.net> for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 10:44:32 -0700 (PDT) Date: Thu, 02 May 2002 10:58:49 -0700 From: jehova Subject: vmware ask for init directories To: freebsd-questions@FreeBSD.ORG Reply-To: tornadox@telnor.net Message-id: <0GVH00HP3VY75C@email.telnor.net> MIME-version: 1.0 X-Mailer: KMail [version 1.3.2] Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i'm installing vmware3.1 and installer ask for where are init directories(!?): What is the directory that contains the init directories (rc0.d/ to rc6.d/)? how can i give answer to installer without tailor my system? (to avoid ill effects on freebsd) off course i have already installed linux emulation port. -- _ __ ___ ____ ___ ___ ___ __ Jehova _ __ ___ | _ ) __| \/ \ tornadox@telnor.net _ __ | _ \._ \ |) | | FreeBSD!!! _ |___/___/___/ \/ "Extracting Wisdom from Sinful... () ...Searching State of Purity." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 10:49:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (Postfix) with ESMTP id 67ECE37B419 for ; Thu, 2 May 2002 10:49:34 -0700 (PDT) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id NAA07193; Thu, 2 May 2002 13:49:37 -0400 (EDT) (envelope-from shovey@buffnet.net) Date: Thu, 2 May 2002 13:49:26 -0400 (EDT) From: Stephen Hovey To: "Geoffrey C. Speicher" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: concurrent pw(8) corrupts master.passwd sometimes? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I had trouble like this with the YP stuff - if two people changed their passwords or something at the same time, etc. I put my own locking in so that if something is in process it doesnt even try to run. if it were me - I would change the method to create a file of pw commands, that a cronjob checks for an executes evern so many minutes IF a lockfile doesnt exit (so worst case it takes an extra 5 minutes before an account is created). On Thu, 2 May 2002, Geoffrey C. Speicher wrote: > ``Sometimes'' being the operative word. I am not able to reliably > reproduce it, but it sure does happen. I don't know for sure that it is > the fault of pw, but that's what I'm trying to determine. > > Here's the scenario: a user visits a web site and fills out a form to > create an account with the site. When they press submit, a record is > inserted into a database table holding their account information. This > triggers a call to 'pw adduser ...' on the local machine so they have a > home directory to store files and a personal email account. > > Usually it works fine, but under some circumstances master.passwd is left > short, sometimes in the middle of a record. Anyone have any ideas that > might save me some time while I'm looking at the pw sources? I'm starting > to wonder if I should run 'nohup pw adduser ...'. > > (Please CC me on reply.) > > Thanks, > Geoff > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11: 2:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hokkshideh2.jetcafe.org (hokkshideh2.jetcafe.org [205.147.43.8]) by hub.freebsd.org (Postfix) with ESMTP id CCC6D37B417 for ; Thu, 2 May 2002 11:02:36 -0700 (PDT) Received: from hokkshideh2.jetcafe.org (localhost [127.0.0.1]) by hokkshideh2.jetcafe.org (8.11.6/8.11.6) with ESMTP id g42I1Ob83251 for ; Thu, 2 May 2002 11:01:24 -0700 (PDT) (envelope-from dave@hokkshideh2.jetcafe.org) Message-Id: <200205021801.g42I1Ob83251@hokkshideh2.jetcafe.org> X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: freebsd-questions@freebsd.org Subject: Difference between RELENG_* and RELENG_*_BP Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 02 May 2002 11:01:19 -0700 From: Dave Hayes Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What does the _BP extension mean on the RELENG tags? ------ Dave Hayes - Consultant - Altadena CA, USA - dave@jetcafe.org >>> The opinions expressed above are entirely my own <<< Words, as is well known, are great foes of reality. --Joseph Conrad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11: 8:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id ABE5A37B41A for ; Thu, 2 May 2002 11:08:48 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g42I8Q323495 for ; Thu, 2 May 2002 14:08:27 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g42J99n4022323 for questions@freebsd.org; Thu, 2 May 2002 15:09:09 -0400 (EDT) (envelope-from david) Date: Thu, 2 May 2002 15:09:08 -0400 From: David Banning To: questions@freebsd.org Subject: security question Message-ID: <20020502150908.A22313@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am running ssh. I am also running openwebmail. If I want to collect my mail from the web using openwebmail, then people could see my password, and then log on as me with ssh. What is a the best way to deal with this? I tried setting up a second user with nologin ability but the privileges are not in order for my mail box. I guess I could also run openwebmail with https? Any feedback would be useful. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:12: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from linux.lnk.lt (linux.lnk.lt [195.12.175.45]) by hub.freebsd.org (Postfix) with SMTP id 3B9EB37B41A for ; Thu, 2 May 2002 11:11:58 -0700 (PDT) Received: (qmail 10181 invoked from network); 2 May 2002 20:11:55 +0200 Received: from unknown (HELO mantas) (195.12.175.42) by 0 with SMTP; 2 May 2002 20:11:55 +0200 Message-ID: <003101c1f204$d7db9ed0$2e01010a@mantas> Reply-To: "Mantas Smelevicius" From: "Mantas Smelevicius" To: "default" , "FreeBSD-Questions" References: Subject: Re: Restricting PS Use Date: Thu, 2 May 2002 20:11:55 +0200 Organization: FreeBSD.lt comunity MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG sysctl kern.ps_showallprocs=0 and ajust line to /etc/sysctl.conf [8:09pm] mantas@ona:~>cat /etc/sysctl.conf | grep ps kern.ps_showallprocs=0 [8:10pm] mantas@ona:~> Result: -------------------------- [8:11pm] mantas@ona:~>ps faux USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND mantas 332 0.0 0.0 1020 0 ?? Is 11Apr02 0:01.75 bnc mantas 412 0.0 3.5 3068 1548 p0- S 11Apr02 17:34.08 ./eggdrop papaj.conf (eggdrop-1.6.10) mantas 26202 0.0 3.7 2988 1624 p3- S Tue01PM 1:28.19 ./eggdrop deamon.conf (eggdrop-1.6.10) mantas 32571 0.0 10.3 9444 4552 ?? S 2:06PM 0:38.73 BitchX trenktaz -H esu.as (BitchX-1.0c18) mantas 33340 0.0 2.2 1316 976 p0 Ss 8:09PM 0:00.13 -tcsh (tcsh) mantas 33353 0.0 0.6 396 244 p0 R+ 8:11PM 0:00.00 ps faux [8:11pm] mantas@ona:~> --------------------------- Mantas Smelevicius Head of IT division LNK TV Lukiskiu 5, 3000 Vilnius Lithuania http://www.mantas.lt ICQ UIN 31072511 ----- Original Message ----- From: "default" To: "FreeBSD-Questions" Sent: Thursday, May 02, 2002 6:58 PM Subject: Restricting PS Use > Hello, > > I have been trying to get this working for a long time to no avail, but... > > Basically I need to restrict the PS command so that normal users are only > able to see their own processes... > > I would appreciate any suggestion on how to do this... > > Thank you > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:12:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id BFD7A37B41C for ; Thu, 2 May 2002 11:12:04 -0700 (PDT) Received: from sub21-156.member.dsl-only.net (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g42IHRC18939; Thu, 2 May 2002 11:17:33 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Thu, 2 May 2002 11:17:27 -0700 From: Nathan Kinkade To: "default" Cc: freebsd-questions@freebsd.org Subject: Re: Symlinks in FTP using ftpchroot Message-Id: <20020502111727.324259b3.nkinkade@dsl-only.com> In-Reply-To: References: X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002 11:59:39 -0500 "default" wrote: > Hi, > > Is there any way to get symlinks that link to a directory below a > user's home directory to work in a ftpchrooted environment? don't know if there is a better way, but take a look at this article: http://proftpd.linux.co.uk/localsite/Userguide/linked/chroot-symlinks.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:12:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web11605.mail.yahoo.com (web11605.mail.yahoo.com [216.136.172.57]) by hub.freebsd.org (Postfix) with SMTP id 986F937B41F for ; Thu, 2 May 2002 11:12:34 -0700 (PDT) Message-ID: <20020502181234.80626.qmail@web11605.mail.yahoo.com> Received: from [64.41.50.93] by web11605.mail.yahoo.com via HTTP; Thu, 02 May 2002 11:12:34 PDT Date: Thu, 2 May 2002 11:12:34 -0700 (PDT) From: Michael Reynolds Subject: RE: ipfw question(s?) To: freebsd-questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- Joe & Fhe Barbish wrote: > You are using stateless rules, the most primitive of all the ipfw > rule types. It is very easy to get past a firewall that only uses > these types of rules. If you really want firewall protection then you > have to use the advanced stateful rule type that came out in FBSD > version 4.0. Read > this > > http://www.freebsd-howto.com/HOWTO/Ipfw-Advanced-Supplement-HOWTO > The only thing I use ipfw for is to keep internal clients from using stuff they shouldn't be. For example, I don't want a web hosting client to be using chat. __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:19:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.smed.com (mail.smed.com [64.46.248.225]) by hub.freebsd.org (Postfix) with ESMTP id 3C97137B419 for ; Thu, 2 May 2002 11:19:17 -0700 (PDT) Received: from smtpgate.smshsc.net (unknown [165.226.204.25]) by mail.smed.com (Postfix) with ESMTP id A7B6E47F83 for ; Thu, 2 May 2002 14:19:12 -0400 (EDT) Received: from iesa14.smshsc.net (iesa14.smshsc.net [165.226.204.44]) by smtpgate.smshsc.net (8.11.6/8.11.6) with ESMTP id g42IJCg01874 for ; Thu, 2 May 2002 14:19:12 -0400 Received: from mlvexc01.smshsc.net (unverified) by iesa14.smshsc.net (Content Technologies SMTPRS 2.0.15) with ESMTP id ; Thu, 02 May 2002 14:19:03 -0400 Received: by mlvexc01.usmlvv1p0a.smshsc.net with Internet Mail Service (5.5.2655.55) id <2X3CNL71>; Thu, 2 May 2002 14:18:27 -0400 Message-Id: From: Warner Joseph To: "'Mark Rowlands'" , "'FreeBSD-Questions@freebsd.org'" Subject: RE: Backing Up FreeBSD with ArcServe Date: Thu, 2 May 2002 14:18:59 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----Original Message----- From: Mark Rowlands [mailto:mark.rowlands@minmail.net] Sent: Thursday, May 02, 2002 11:05 AM To: Warner Joseph; 'FreeBSD-Questions@freebsd.org' Subject: Re: Backing Up FreeBSD with ArcServe On Thursday 02 May 2002 6:09 pm, Warner Joseph wrote: > Is there anyone out there using ARCserve to backup FreeBSD? > > We have ARCserve running on a W2K server in conjunction with > a Compaq DLT library system to get backups of all our W2K and > NT servers. I should be able to install an agent on our FreeBSD > (4.5 -STABLE) server and get backups of it as well but I don't > know which agent we need. > > If anyone is using ARCserve to backup their FreeBSD boxen, a > response would be much appreciated. > could try the Microsoft Services for Unix product and nfs mount the freebsd box or use samba on the freebsd box (which I have tested with using Backup Exec) Yes, I've thought of trying that if I couldn't find an ARCserve agent for FreeBSD. I did a Google search and found references to a BSDI agent for ARCserve but couldn't find any references to this agent over at ARCserve's site: http://www3.ca.com/Solutions/ProductFamily.asp?ID=115 whatever you choose to do....make sure you have a bootable disk / cd of some variety for the 'bsd box so you can get it to the stage where you can actually restore files!. Oh and actually test that you can restore files. Yeah, that sounds like a given. Thanks for responding so quickly.. Joe > > > > > Joe Warner | Operations Technical Analyst II | Siemens Health Services | > 215 N. Admiral Byrd Road | Salt Lake City, UT 84116 | Ph: 801-539-4978 | > Fax: 801-533-8004 | Joe.Warner@smed.com > > > > > > > --------------------------------------------------------------------------- >---- This message and any included attachments are from Siemens Medical > Solutions Health Services Corporation and are intended only for the > addressee(s). The information contained herein may include trade secrets or > privileged or otherwise confidential information. Unauthorized review, > forwarding, printing, copying, distributing, or using such information is > strictly prohibited and may be unlawful. If you received this message in > error, or have reason to believe you are not authorized to receive it, > please promptly delete this message and notify the sender by e-mail with a > copy to CSOffice@smed.com. Thank you ------------------------------------------------------------------------------- This message and any included attachments are from Siemens Medical Solutions Health Services Corporation and are intended only for the addressee(s). The information contained herein may include trade secrets or privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you received this message in error, or have reason to believe you are not authorized to receive it, please promptly delete this message and notify the sender by e-mail with a copy to CSOffice@smed.com. Thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:22:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web10007.mail.yahoo.com (web10007.mail.yahoo.com [216.136.130.43]) by hub.freebsd.org (Postfix) with SMTP id 8415137B405 for ; Thu, 2 May 2002 11:22:27 -0700 (PDT) Message-ID: <20020502182226.48214.qmail@web10007.mail.yahoo.com> Received: from [193.227.168.5] by web10007.mail.yahoo.com via HTTP; Thu, 02 May 2002 11:22:26 PDT Date: Thu, 2 May 2002 11:22:26 -0700 (PDT) From: Walid Nehme Subject: ipfw and ipfilter To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG what is better, ipfw or ipfilter, and which is newer? which is faster to nat with? ===== Regards. Walid Nehme ICQ:5855336 MSN:nastylid@hotmail.com my homepage http://gayana.kharkov.com/Start.html __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:22:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id EE88337B416 for ; Thu, 2 May 2002 11:22:34 -0700 (PDT) Received: (qmail 13359 invoked by uid 0); 2 May 2002 18:22:32 -0000 Received: from pd9e4d4f8.dip.t-dialin.net (HELO snorry.myip.org) (217.228.212.248) by mail.gmx.net (mp004-rz3) with SMTP; 2 May 2002 18:22:32 -0000 Content-Type: text/plain; charset="us-ascii" From: Thomas Wuerfl To: freebsd-questions@freebsd.org Subject: how enable atapi-dma in current Date: Thu, 2 May 2002 20:22:53 +0200 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200205022022.53569.thomaswuerfl@gmx.de> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I've upgraded from 4.5 to current. (just curious) Now I cant enable dma for my cdrw and dvd. I tried: =09snorry# sysctl hw.ata.atapi_dma=3D1 =09sysctl: oid 'hw.ata.atapi_dma' is read only =09snorry# Thanks in advance Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:24:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blacklamb.mykitchentable.net (ekgr-dsl2-92.citlink.net [207.173.226.92]) by hub.freebsd.org (Postfix) with ESMTP id 49D3F37B416 for ; Thu, 2 May 2002 11:24:09 -0700 (PDT) Received: from tagalong (unknown [165.107.42.110]) by blacklamb.mykitchentable.net (Postfix) with SMTP id 29614EE63C for ; Thu, 2 May 2002 11:24:08 -0700 (PDT) Message-ID: <010101c1f206$8c69bcf0$6e2a6ba5@lc.ca.gov> From: "Drew Tomlinson" To: Subject: Gnome Problem After Portupgrade Date: Thu, 2 May 2002 11:24:07 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I attempted to use portupgrade -rR to update gnome and all of it's dependencies. I had a few problems along the way when portupgrade failed to download one of the required tarballs and left my system in an inconsistent state. I've worked through the issues and finally got the upgrade completed but receive this error (in a window) when starting gnome: Desk Guide Alert GNOME Desktop Guide (Pager) You are not running a GNOME Compliant Window Manager. GNOME support by the window manager is strongly recommended for proper Desk Guide Operation. I'm using Sawfish that installs with the gnome port. I've used pkg_deinstall to remove sawfish-gnome and then rebuilt it from ports using portinstall. Same error. Any ideas how to fix this short of rebuiling gnome in its entirety? Thanks, Drew List of all installed packages follows. Most everything is up to date. # portversion Mesa = ORBit = XFree86 = XFree86-FontServer = XFree86-Server = XFree86-clients = XFree86-documents = XFree86-font100dpi = XFree86-font75dpi = XFree86-fontCyrillic = XFree86-fontDefaultBitmaps = XFree86-fontEncodings = XFree86-fontScalable = XFree86-libraries = autoconf213 = automake14 = bison < bonobo = bugbuddy = cvsup = db3 = eel = esound = ezm3 = freeamp-esound = freetype = freetype2 = gal = galeon = gconf = gdbm = gdk-pixbuf = gdm = gettext = gettext = ggv = ghex = ghostscript-gnu = glade = gle = glib = glibwww = gmake = gnome = gnomeapplets = gnomeaudio = gnomecanvas = gnomecontrolcenter = gnomecore = gnomedb = gnomegames = gnomelibs = gnomemedia = gnomemimedata = gnomemm = gnomepilot = gnomepilot-conduits = gnomepim = gnomeprint = gnomeuserdocs = gnomeutils = gnomevfs = gob = gtar < gtk = gtk-engines = gtkglarea = gtkhtml = gtkmm = gtop = guile = guile-gnome = guile-gtk = imake = imlib = javavmwrapper = jdk < jpeg = lcms = libaudiofile = libgda = libghttp = libglade = libgnugetopt = libgtop = libiconv = libmng = libogg = librep = librsvg = libsigc++ = libtool = libungif = libunicode = libvorbis = libwww = libxml = linux_base = m4 = medusa = mozilla = mozilla-headers = musicbrainz = nasm = nautilus = nmap = nmapfe = nspr = oaf = open-motif-devel = panelmm = pilot-link = pkg_tarup = pkgconfig = png = popt = portupgrade < pspell = py-gnome = py-gtk = py22-numeric = python = rep-gtk-gnome = rpm < ruby < ruby-bdb1 = ruby-fnmatch = ruby-optparse = sawfish-gnome = scrollkeeper = sharity-light = sox = tcl = tiff = tk = unzip = urwfonts = xalf = xscreensaver-gnome = zip = To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:28:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from speicher.org (sirius.speicher.org [209.74.10.51]) by hub.freebsd.org (Postfix) with ESMTP id AA30F37B416 for ; Thu, 2 May 2002 11:28:48 -0700 (PDT) Received: from localhost (geoff@localhost) by speicher.org (8.11.6/8.11.6) with ESMTP id g42IUSo42516; Thu, 2 May 2002 14:30:29 -0400 (EDT) (envelope-from geoff@speicher.org) Date: Thu, 2 May 2002 14:30:28 -0400 (EDT) From: "Geoffrey C. Speicher" To: Stephen Hovey Cc: freebsd-questions@FreeBSD.ORG Subject: Re: concurrent pw(8) corrupts master.passwd sometimes? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002, Stephen Hovey wrote: > I had trouble like this with the YP stuff - if two people changed their > passwords or something at the same time, etc. > > I put my own locking in so that if something is in process it doesnt even > try to run. How much code do pw and the YP utils use in common? This is an excerpt from the BUGS section of pw(8): There are the obvious races with multiple people running pwd_mkdb on dif- ferent password files at the same time. The front-ends to pwd_mkdb, chpass(1), passwd(1) and vipw(8), handle the locking necessary to avoid this problem. Isn't pw(8) conspicuously missing from that list? > if it were me - I would change the method to create a file of pw commands, > that a cronjob checks for an executes evern so many minutes IF a lockfile > doesnt exit (so worst case it takes an extra 5 minutes before an account > is created). Good idea. It may come to that if I can't fix it the right way. Geoff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:37:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (Postfix) with ESMTP id 7EF1A37B41A for ; Thu, 2 May 2002 11:36:48 -0700 (PDT) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id OAA10838; Thu, 2 May 2002 14:36:53 -0400 (EDT) (envelope-from shovey@buffnet.net) Date: Thu, 2 May 2002 14:36:41 -0400 (EDT) From: Stephen Hovey To: "Geoffrey C. Speicher" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: concurrent pw(8) corrupts master.passwd sometimes? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think with the yp stuff it was the script for pushing out the maps - it would call pwd_mkdb or whatever and could sometimes do so concurrently and chew the works - SCO's did the same thing. So I just modified the script file to check for a certain file - if it exits, abort, if it doesnt exit, create it and continue ending in the removal of said file. Nothing fancy - but enough to keep my password files in 1 piece! :) On Thu, 2 May 2002, Geoffrey C. Speicher wrote: > On Thu, 2 May 2002, Stephen Hovey wrote: > > > I had trouble like this with the YP stuff - if two people changed their > > passwords or something at the same time, etc. > > > > I put my own locking in so that if something is in process it doesnt even > > try to run. > > How much code do pw and the YP utils use in common? > > This is an excerpt from the BUGS section of pw(8): > > There are the obvious races with multiple people running pwd_mkdb on dif- > ferent password files at the same time. The front-ends to pwd_mkdb, > chpass(1), passwd(1) and vipw(8), handle the locking necessary to avoid > this problem. > > Isn't pw(8) conspicuously missing from that list? > > > if it were me - I would change the method to create a file of pw commands, > > that a cronjob checks for an executes evern so many minutes IF a lockfile > > doesnt exit (so worst case it takes an extra 5 minutes before an account > > is created). > > Good idea. It may come to that if I can't fix it the right way. > > Geoff > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:39:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.prod.itd.earthlink.net (scaup.mail.pas.earthlink.net [207.217.120.49]) by hub.freebsd.org (Postfix) with ESMTP id 0D36837B404; Thu, 2 May 2002 11:39:51 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by scaup.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173LUZ-00033N-00; Thu, 02 May 2002 11:39:47 -0700 Received: from mlevy.flncs.com (cylex [12.27.148.78]) by ns.flncs.com (Postfix) with ESMTP id 5FA48557E; Thu, 2 May 2002 14:43:11 -0400 (EDT) Message-Id: <5.1.0.14.2.20020502144030.00a91868@imap.flncs.com> X-Sender: mlevy@imap.flncs.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 14:42:02 -0400 To: freebsd-security@freebsd.org, freebsd-questions@freebsd.org From: Moti Subject: Netscreen 100 lan to lan vpn connection using freebsd and racoon ? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi , has anyone tried this setup before ? if so please share. thanks Moti To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 11:41:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fubar.damon.com (damon.com [199.98.84.2]) by hub.freebsd.org (Postfix) with ESMTP id 8B07D37B43A for ; Thu, 2 May 2002 11:40:49 -0700 (PDT) Received: from fubar.damon.com (localhost [127.0.0.1]) by fubar.damon.com (8.12.2/8.12.2) with ESMTP id g42IenwM061681 for ; Thu, 2 May 2002 13:40:49 -0500 (CDT) (envelope-from dap@fubar.damon.com) Received: (from dap@localhost) by fubar.damon.com (8.12.2/8.12.2/Submit) id g42IemTq061680 for freebsd-questions@freebsd.org; Thu, 2 May 2002 13:40:48 -0500 (CDT) Date: Thu, 2 May 2002 13:40:48 -0500 From: Damon Permezel To: freebsd-questions@freebsd.org Subject: dell poweredge 4600: host-pci bridges not crossed? Message-ID: <20020502184048.GL24693@fubar.damon.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. New toy. The 4600 has 6 PCI-X slots, which I believe are paired on 3 busses across HOST-PCI bridges. The BIOS knows there is a broadcom NeteXtreme card plugged in. It shows the pair of slots running in PCI-X mode with one slot empty and one slot with the device which it identifies. There is an additional BCM57xx device on the motherb**rd. This is found and the device works. Running 4.5-RELEASE, updated last night. Scanpci, pciconf, and the boot-time pci probes do not find the additional card. BIOS finds it, and identifies it, and the link comes up when plugged into a switch, so I am reasonably sure it is seated correctly. Here is the `pciconf -v -l' output: chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x22 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip2@pci0:0:2: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI chip3@pci0:0:3: class=0x060000 card=0x00000000 chip=0x00111166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CMIC-HE' class = bridge subclass = HOST-PCI fxp0@pci0:4:0: class=0x020000 card=0x01061028 chip=0x12298086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet ahc0@pci0:6:0: class=0x010000 card=0x01061028 chip=0x001f9005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'AHA-2940U2/AHA-2940U2W AIC-7890/1 Ultra2 SCSI Controller' class = mass storage subclass = SCSI none0@pci0:14:0: class=0x030000 card=0x01061028 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies' device = 'Rage XL PCI' class = display subclass = VGA chip4@pci0:15:0: class=0x060000 card=0x02011166 chip=0x02011166 rev=0x93 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CSB5 PCI to ISA Bridge' class = bridge subclass = HOST-PCI atapci0@pci0:15:1: class=0x010182 card=0x02121166 chip=0x02121166 rev=0x93 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CSB5 PCI EIDE Controller' class = mass storage subclass = ATA isab0@pci0:15:3: class=0x060100 card=0x02301166 chip=0x02251166 rev=0x00 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' class = bridge subclass = PCI-ISA chip5@pci0:16:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip6@pci0:16:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip7@pci0:17:0: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI chip8@pci0:17:2: class=0x060000 card=0x00000000 chip=0x00101166 rev=0x03 hdr=0x00 vendor = 'Reliance Computer Corp./ServerWorks' device = 'CIOB30' class = bridge subclass = HOST-PCI bge0@pci1:6:0: class=0x020000 card=0x01061028 chip=0x164414e4 rev=0x14 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5700/1 Gigabit Ethernet Controller' class = network subclass = ethernet pcib9@pci1:8:0: class=0x060400 card=0x00000068 chip=0x03098086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = '80303 I/O Processor PCI-to-PCI Bridge Unit' class = bridge subclass = PCI-PCI aac0@pci1:8:1: class=0x010400 card=0x01061028 chip=0x000a1028 rev=0x01 hdr=0x00 vendor = 'Dell Computer Corporation' device = 'PowerEdge 3/Di Expandable RAID Controller' class = mass storage subclass = RAID none1@pci2:6:0: class=0x010000 card=0x00c51028 chip=0x00c59005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'RAID Subsystem HBA' class = mass storage subclass = SCSI none2@pci2:6:1: class=0x010000 card=0x00c51028 chip=0x00c59005 rev=0x01 hdr=0x00 vendor = 'Adaptec' device = 'RAID Subsystem HBA' class = mass storage subclass = SCSI Here is `dmesg': Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE-p4 #0: Thu May 2 00:00:20 CDT 2002 root@:/usr/obj/usr/src/sys/FUBAR Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1986388284 Hz CPU: Pentium 4 (1986.39-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff,ACC> real memory = 536805376 (524224K bytes) avail memory = 519397376 (507224K bytes) Preloaded elf kernel "kernel" at 0xc031c000. md0: Malloc disk Using $PIR table, 13 entries at 0xc00fc140 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 fxp0: port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe203000-0xfe203fff irq 11 at device 4.0 on pci0 fxp0: Ethernet address 00:06:5b:88:18:bc inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: port 0xe800-0xe8ff mem 0xfe202000-0xfe202fff irq 10 at device 6.0 on pci0 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs pci0: at 14.0 atapci0: port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 isab0: at device 15.3 on pci0 isa0: on isab0 pcib1: on motherboard pci1: on pcib1 bge0: mem 0xfcf00000-0xfcf0ffff irq 5 at device 6.0 on pci1 bge0: Ethernet address: 00:06:5b:88:18:bd miibus1: on bge0 brgphy0: on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib9: at device 8.0 on pci1 pci2: on pcib9 pci2: (vendor=0x9005, dev=0x00c5) at 6.0 irq 11 pci2: (vendor=0x9005, dev=0x00c5) at 6.1 irq 10 aac0: mem 0xf0000000-0xf7ffffff irq 11 at device 8.1 on pci1 aac0: i960RX 100MHz, 118MB cache memory, optional battery present aac0: Kernel 2.7-0, Build 3153, S/N b821d3 pcib2: on motherboard pci3: on pcib2 pcib3: on motherboard pci4: on pcib3 pcib4: on motherboard pci5: on pcib4 pcib5: on motherboard pci6: on pcib5 pcib6: on motherboard pci7: on pcib6 pcib7: on motherboard pci8: on pcib7 pcib8: on motherboard pci9: on pcib8 orm0:
I want to post-install and configure a=20 Novell NE2000 Plus 3 Ethernet card on FreeBSD = 4.5.  I can=20 start the FreeBSD Configuration Menu, and = select the=20 Networking option, which starts the=20 Network Services Menu.  From that menu, I = select=20 the Interfaces - Configure additional network interfaces=20 option, which presents the Network interface=20 information required panel.  There are no Ethernet = devices in=20 the list.  (I suspect that this is because) when I initially = installed=20 FreeBSD 4.5, I did not have the NE2000 in hand; therefore, I deactivated = all=20 Ethernet devices (seemed like the thing to do at the time. . .  = I had enough trouble sorting out the mouse and CDROM=20 problems.)
 
To what file, table, etc. do I add the = Ethernet=20 card description; or what utility procedure can be accessed to activate = the=20 required device entry?  Does this require a kernel = rebuild?
 
This system will function as a proprietary internet web-server, = attached to=20 a Cayman 3220-H gateway router, capable of = IPv4,=20 PPPoE, PPPoA, PPP Subnet extension, Ethernet LLC, and other = protocols.  It=20 also supports local DHCP and NATs.  (What) should I enable = regarding PPP in=20 the FreeBSD v4.5 environment.  Most of what I read in the MAN pages = regarding PPP discuss dial-up connections and hardwired Ethernet=20 connections.  I don't find any discussion of ADSL services.  = Any=20 suggestions?
 
 
Thanks,
Ron = W.
------=_NextPart_000_001C_01C1F1E2.59E3F8A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:11:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cicero1.cybercity.dk (cicero1.cybercity.dk [212.242.40.4]) by hub.freebsd.org (Postfix) with ESMTP id E264037B404 for ; Thu, 2 May 2002 12:11:37 -0700 (PDT) Received: from usr00.netlink.se (usr00.netlink.se [212.242.41.186]) by cicero1.cybercity.dk (Postfix) with ESMTP id E7ECE15FCB5 for ; Thu, 2 May 2002 21:11:35 +0200 (CEST) Received: from thrawn.birch.se (port311.cvx3-mal.ppp.netlink.se [62.66.14.58]) by usr00.netlink.se (8.11.6/8.11.0) with ESMTP id g42JBYm13975 for ; Thu, 2 May 2002 21:11:35 +0200 (CEST) (envelope-from thrawn@linux.nu) Date: Thu, 2 May 2002 21:11:51 +0200 (CEST) From: =?iso8859-1?Q?Mattias_Bj=F6rk?= X-X-Sender: thrawn@thrawn.birch.se To: freebsd-questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:14:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 9BEFD37B41A for ; Thu, 2 May 2002 12:14:27 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g42JE4U32757; Thu, 2 May 2002 15:14:04 -0400 Message-ID: <3CD19136.5040504@potentialtech.com> Date: Thu, 02 May 2002 15:19:18 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: David Banning Cc: questions@freebsd.org Subject: Re: security question References: <20020502150908.A22313@mail.clubplus.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG David Banning wrote: > I am running ssh. I am also running openwebmail. > > If I want to collect my mail from the web using openwebmail, then > people could see my password, and then log on as me with ssh. Yup, very bad ... the Apache server was compromised a little while back because of this kind of thing. > What is a the best way to deal with this? Depends on the exact circumstance > I tried setting up a second user with nologin ability but the privileges > are not in order for my mail box. That would be an excellent solution. Perhaps some research will uncover a way to make the permissions work. > I guess I could also run openwebmail with https? That's better than clear text, although https' 128bit encryption is starting to feel pretty weak in the light of 2ghz processors! -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:17:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f13.pav0.hotmail.com [64.4.33.84]) by hub.freebsd.org (Postfix) with ESMTP id F2CBA37B400 for ; Thu, 2 May 2002 12:17:37 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 12:17:37 -0700 Received: from 65.168.208.46 by pv0fd.pav0.hotmail.msn.com with HTTP; Thu, 02 May 2002 19:17:37 GMT X-Originating-IP: [65.168.208.46] Reply-To: matt.anderson@aecinc.com From: "Matt Anderson" To: freebsd-questions@freebsd.org Subject: Tape Library Question Date: Thu, 02 May 2002 12:17:37 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 02 May 2002 19:17:37.0858 (UTC) FILETIME=[057C4A20:01C1F20E] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello everyone. First, I apologize for sending this from msn with the resulting html crap. I had no choice at this time. Ok. I have a DLT tape library hooked to a FreeBSD 4.4 machine. No problem with the tape drive. I have not had the library hooked to a *nix machine in a long time. I remember there was a command that let me manipulate the tapes. I don't remember what it was. Any help would be appreciated! Matt Anderson matt.anderson@aecinc.com _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:20:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 279BE37B405 for ; Thu, 2 May 2002 12:20:15 -0700 (PDT) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.3) id g42JKDu0098017; Thu, 2 May 2002 14:20:13 -0500 (CDT) (envelope-from dan) Date: Thu, 2 May 2002 14:20:13 -0500 From: Dan Nelson To: matt.anderson@aecinc.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tape Library Question Message-ID: <20020502192013.GD70810@dan.emsphone.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (May 02), Matt Anderson said: > Hello everyone. > First, I apologize for sending this from msn with the resulting html crap. > I had no choice at this time. No html here. > Ok. I have a DLT tape library hooked to a FreeBSD 4.4 machine. > > No problem with the tape drive. I have not had the library hooked to a > *nix machine in a long time. I remember there was a command that let > me manipulate the tapes. I don't remember what it was. Under FreeBSD, you can use the "chio" command to move tapes around inside the loader. -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:25:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blueyonder.co.uk (pcow034o.blueyonder.co.uk [195.188.53.122]) by hub.freebsd.org (Postfix) with ESMTP id F090337B405 for ; Thu, 2 May 2002 12:25:17 -0700 (PDT) Received: from pcow034o.blueyonder.co.uk ([127.0.0.1]) by blueyonder.co.uk with Microsoft SMTPSVC(5.5.1877.757.75); Thu, 2 May 2002 20:23:03 +0100 Received: from [62.30.182.153] (unverified [62.30.182.153]) by pcow034o.blueyonder.co.uk (Content Technologies SMTPRS 4.2.9) with ESMTP id for ; Thu, 2 May 2002 20:23:03 +0100 User-Agent: Microsoft-Entourage/9.0.2.4011 Date: Thu, 02 May 2002 20:23:04 +0100 Subject: Mac&Tosh From: aedan To: Message-ID: Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a mac 8500, newer366 g3 card/xlr8 drivers/voodoo5 card-freebsd, netbsd or openbsd? Also a Toshiba 2540 CDS,athlon K6,is this a viable bsd box Plan would be to use toshiba as router To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:26:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rapidnet.com (ns.rapidnet.com [64.251.173.97]) by hub.freebsd.org (Postfix) with ESMTP id 67E6337B417 for ; Thu, 2 May 2002 12:26:36 -0700 (PDT) Received: from RapidNet.com (webmail.rapidnet.com [205.164.216.5]) by rapidnet.com (8.9.3/8.9.3) with SMTP id NAA60659; Thu, 2 May 2002 13:26:27 -0600 (MDT) From: Troy Barnhart Received: from 207.108.15.11 (SquirrelMail authenticated user barney) by webmail.rapidnet.com with HTTP; Thu, 2 May 2002 13:44:41 -0600 (MDT) Message-ID: <30940.207.108.15.11.1020368681.squirrel@webmail.rapidnet.com> Date: Thu, 2 May 2002 13:44:41 -0600 (MDT) Subject: RE: Backing Up FreeBSD with ArcServe To: Joseph.Warner@siemens.com In-Reply-To: References: Cc: mark.rowlands@minmail.net, FreeBSD-Questions@freebsd.org X-Mailer: SquirrelMail (version 1.0.3) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm running it. Use the linux client (uagent.rpm) on your Arcserve2000 cd. Also, check out CA's Brightstor for Linux package. I started out using arcserve because of it's capability to do AIX (for my work as a hospital sysadmin) and was a beta tester for the new brightstor product - ended up bringing a copy home and tested it w/ my freebsd boxes. samba has worked for me, also. barney > > > -----Original Message----- > From: Mark Rowlands [mailto:mark.rowlands@minmail.net] > Sent: Thursday, May 02, 2002 11:05 AM > To: Warner Joseph; 'FreeBSD-Questions@freebsd.org' > Subject: Re: Backing Up FreeBSD with ArcServe > > > On Thursday 02 May 2002 6:09 pm, Warner Joseph wrote: >> Is there anyone out there using ARCserve to backup FreeBSD? >> >> We have ARCserve running on a W2K server in conjunction with >> a Compaq DLT library system to get backups of all our W2K and >> NT servers. I should be able to install an agent on our FreeBSD (4.5 >> -STABLE) server and get backups of it as well but I don't >> know which agent we need. >> >> If anyone is using ARCserve to backup their FreeBSD boxen, a >> response would be much appreciated. >> > > could try the Microsoft Services for Unix product and nfs mount the > freebsd box or use samba on the freebsd box (which I have tested with > using Backup Exec) > > Yes, I've thought of trying that if I couldn't find an ARCserve > agent for FreeBSD. I did a Google search and found references to > a BSDI agent for ARCserve but couldn't find any references to this > agent over at ARCserve's site: > > http://www3.ca.com/Solutions/ProductFamily.asp?ID=115 > > > > whatever you choose to do....make sure you have a bootable disk / cd of > some > > variety for the 'bsd box so you can get it to the stage where you can > actually restore files!. Oh and actually test that you can restore > files. > > Yeah, that sounds like a given. > > Thanks for responding so quickly.. > > Joe > > > >> >> >> >> >> Joe Warner | Operations Technical Analyst II | Siemens Health Services >> | 215 N. Admiral Byrd Road | Salt Lake City, UT 84116 | Ph: >> 801-539-4978 | Fax: 801-533-8004 | >> Joe.Warner@smed.com >> >> >> >> >> >> >> > -------------------------------------------------------------------------- - >>---- This message and any included attachments are from Siemens Medical >> Solutions Health Services Corporation and are intended only for the >> addressee(s). The information contained herein may include trade >> secrets > or >> privileged or otherwise confidential information. Unauthorized >> review, forwarding, printing, copying, distributing, or using such >> information is strictly prohibited and may be unlawful. If you >> received this message in error, or have reason to believe you are not >> authorized to receive it, please promptly delete this message and >> notify the sender by e-mail with a copy to CSOffice@smed.com. Thank >> you > > > > -------------------------------------------------------------------------- ----- > This message and any included attachments are from Siemens Medical > Solutions Health Services Corporation and are intended only for the > addressee(s). The information contained herein may include trade > secrets or privileged or otherwise confidential information. > Unauthorized review, forwarding, printing, copying, distributing, or > using such information is strictly prohibited and may be unlawful. If > you received this message in error, or have reason to believe you are > not authorized to receive it, please promptly delete this message and > notify the sender by e-mail with a copy to CSOffice@smed.com. Thank > you > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:35:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id 2E9E837B417 for ; Thu, 2 May 2002 12:35:23 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.36.105]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Thu, 2 May 2002 15:33:54 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Date: Thu, 2 May 2002 15:35:17 -0400 X-Mailer: KMail [version 1.2] References: <02050211025001.04136@fcoffice.ptfd.org> <20020502185516.B33337@bsag.ch> In-Reply-To: <20020502185516.B33337@bsag.ch> MIME-Version: 1.0 Message-Id: <02050215351700.04429@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hmm... cat /var/log/messages looks normal (cept what is a malloc disk?) but dmesg just yeilds 644, and thats it? Mike On Thursday 02 May 2002 12:55, you wrote: > On May 02 at 11:02, Michael W.Holdeman spoke: > > make depend (completes error free about 70% of the time, others out error > > code 1) > > (if make depend goes I will continue) > > make ( always fails, different messages EACH time. Sometimes talkling > > about white spaces in files?, other times talking about invalid pipes, or > > kernel panics?) > > Is there anything suspicious in `dmesg` or /var/log/messages? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:37:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f36.pav0.hotmail.com [64.4.32.220]) by hub.freebsd.org (Postfix) with ESMTP id 7EC2737B41B for ; Thu, 2 May 2002 12:37:57 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 12:37:57 -0700 Received: from 65.168.208.46 by pv0fd.pav0.hotmail.msn.com with HTTP; Thu, 02 May 2002 19:37:56 GMT X-Originating-IP: [65.168.208.46] Reply-To: matt.anderson@aecinc.com From: "Matt Anderson" To: freebsd-questions@freebsd.org Subject: Tape Library take 2 Date: Thu, 02 May 2002 12:37:56 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 02 May 2002 19:37:57.0067 (UTC) FILETIME=[DC30D1B0:01C1F210] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks to Dan Nelson for the answer! chio was the command I was thinking of. Now, when I try it, I get device not configured error. Is there a kernel option I have to compile in to get changer support? Thanks! Matt Anderson _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:41:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from chen.org.nz (chen.org.nz [210.54.19.51]) by hub.freebsd.org (Postfix) with ESMTP id AF74337B417 for ; Thu, 2 May 2002 12:41:50 -0700 (PDT) Received: from grimoire.chen.org.nz (localhost [127.0.0.1]) by chen.org.nz (8.12.3/8.12.3) with ESMTP id g42JfmP9044403; Fri, 3 May 2002 07:41:48 +1200 (NZST) (envelope-from jonc@grimoire.chen.org.nz) Received: (from jonc@localhost) by grimoire.chen.org.nz (8.12.3/8.12.3/Submit) id g42Jfirw044402; Fri, 3 May 2002 07:41:44 +1200 (NZST) Date: Fri, 3 May 2002 07:41:44 +1200 From: Jonathan Chen To: Tom Kersten Cc: freebsd-questions@FreeBSD.ORG Subject: Re: QT3 installation problem (from ports) Message-ID: <20020503074144.B44316@grimoire.chen.org.nz> References: <20020502163224.78261.qmail@web10002.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020502163224.78261.qmail@web10002.mail.yahoo.com>; from tomkersten98@yahoo.com on Thu, May 02, 2002 at 09:32:24AM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 09:32:24AM -0700, Tom Kersten wrote: [...] > /usr/X11R6/include/X11/Xft/XftFreetype.h:34: syntax > error before `;' > /usr/X11R6/include/X11/Xft/XftFreetype.h:37: syntax > error before `;' > /usr/X11R6/include/X11/Xft/XftFreetype.h:41: syntax > error before `;' > /usr/X11R6/include/X11/Xft/XftFreetype.h:54: syntax > error before `;' > /usr/X11R6/include/X11/Xft/XftFreetype.h:71: syntax > error before `,' > gmake[1]: *** [.obj/debug-mt/qapplication_x11.o] Error > 1 Here's a wild guess: Portupgrade your freetype1 and freetype2 ports. -- Jonathan Chen ---------------------------------------------------------------------- "Irrationality is the square root of all evil" - Douglas Hofstadter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 12:44:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.sunflower.com (smtp.sunflower.com [24.124.0.128]) by hub.freebsd.org (Postfix) with ESMTP id A1FC037B419 for ; Thu, 2 May 2002 12:44:33 -0700 (PDT) Received: from workstation4 (dv162s55.lawrence.ks.us [24.124.55.162]) by smtp.sunflower.com (8.11.6/8.11.6) with ESMTP id g42JiWv24784; Thu, 2 May 2002 14:44:32 -0500 From: "Brandon Young" To: "'Michael Coward'" , Subject: RE: Very Inportant Question Date: Thu, 2 May 2002 14:44:26 -0500 Message-ID: <000601c1f211$c77bcdf0$0100a8c0@workstation4> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-reply-to: Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yes, you can run Windows XP and FreeBSD 4.5 on the same machine, from the same hard disk. The trick is partitioning (obviously). I currently have a 15 GB hard disk divided into 2 equally sized primary partitions ... the first one is Windows XP, and the second one is for FreeBSD. I happen to use the GRUB bootloader, but that isn't required ... as someone else mentioned, they use the native FBSD bootloader. I just like GRUB. It's my personal feeling that the XP bootloader isn't worth the trouble. If XP takes up all your hard disk space, you may have some issues finding a good program for resizing the partition ... if you have it available, Partition Magic 7 is awesome. Brandon -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG] On Behalf Of Michael Coward Sent: Thursday, May 02, 2002 4:21 AM To: freebsd-questions@FreeBSD.ORG Subject: Very Inportant Question Hi I just downloaded FreeBsd Version 4.5 ISO. I curently have windoes XP on my computer and you know how xp can run multiple operating systems!! Well if I install FREEBSD on the same harddisk will there be ne conflicts?? Well please get back to me asap Regards Michael _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:17:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 9467B37B449 for ; Thu, 2 May 2002 13:13:01 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g42KA1s09255 for ; Thu, 2 May 2002 22:10:01 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g42KA0U09248 for ; Thu, 2 May 2002 22:10:00 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g42K7Ub24152 for freebsd-questions@FreeBSD.ORG; Thu, 2 May 2002 22:07:30 +0200 Date: Thu, 2 May 2002 22:07:30 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <02050211025001.04136@fcoffice.ptfd.org> <20020502185516.B33337@bsag.ch> <02050215351700.04429@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <02050215351700.04429@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 03:35:17PM -0400 Message-Id: <20020502201301.9467B37B449@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 15:35, Michael W.Holdeman spoke: > Hmm... cat /var/log/messages looks normal (cept what is a malloc disk?) > but dmesg just yeilds 644, and thats it? I don't understand this either. Is /sbin/dmesg not executable (chmod +x)? Or is a file called dmesg in your current directory? (Use /sbin/dmesg.) You don't mind to post these lines here? -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:17:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ws4-4.us4.outblaze.com (205-158-62-105.outblaze.com [205.158.62.105]) by hub.freebsd.org (Postfix) with SMTP id CDEEA37B9F1 for ; Thu, 2 May 2002 13:17:08 -0700 (PDT) Received: (qmail 18957 invoked by uid 1001); 2 May 2002 13:55:09 -0000 Message-ID: <20020502135508.18953.qmail@linuxmail.org> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) Received: from [205.218.122.138] by ws4-4.us4.outblaze.com with http for tomoki@linuxmail.org; Thu, 02 May 2002 07:55:06 -0600 From: "Tomoki Taniguchi" To: freebsd-questions@freebsd.org Date: Thu, 02 May 2002 07:55:06 -0600 Subject: prism2 + wep X-Originating-Ip: 205.218.122.138 X-Originating-Server: ws4-4.us4.outblaze.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG PLEASE COPY tomoki@linuxmail.org FOR ANY REPLIES. NOT IN LIST. According to the release notes for STABLE, the wi drivers now support prism2 chips with wep. So I decided to try it out. well, I ran into a slight problem. The card with wep seems to work enough to get an ip with dhcp, but right after if I try to ping my gateway, I get a "no route to host" messages. any ideas? -tomoki -- Get your free email from www.linuxmail.org Powered by Outblaze To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:21:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 019A037BA25 for ; Thu, 2 May 2002 13:19:08 -0700 (PDT) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.3) id g42KJ70w063505; Thu, 2 May 2002 15:19:07 -0500 (CDT) (envelope-from dan) Date: Thu, 2 May 2002 15:19:07 -0500 From: Dan Nelson To: matt.anderson@aecinc.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tape Library take 2 Message-ID: <20020502201907.GE70810@dan.emsphone.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (May 02), Matt Anderson said: > Thanks to Dan Nelson for the answer! chio was the command I was thinking > of. > > Now, when I try it, I get device not configured error. Is there a kernel > option I have to compile in to get changer support? device ch #SCSI media changers -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:22:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ws4-4.us4.outblaze.com (205-158-62-105.outblaze.com [205.158.62.105]) by hub.freebsd.org (Postfix) with SMTP id 75A7837BAA9 for ; Thu, 2 May 2002 13:20:51 -0700 (PDT) Received: (qmail 19082 invoked by uid 1001); 2 May 2002 14:13:51 -0000 Message-ID: <20020502141351.19081.qmail@linuxmail.org> Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: inline Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-Mailer: MIME-tools 5.41 (Entity 5.404) Received: from [205.218.122.138] by ws4-4.us4.outblaze.com with http for tomoki@linuxmail.org; Thu, 02 May 2002 08:13:50 -0600 From: "Tomoki Taniguchi" To: freebsd-questions@freebsd.org Date: Thu, 02 May 2002 08:13:50 -0600 Subject: prism2 + wep X-Originating-Ip: 205.218.122.138 X-Originating-Server: ws4-4.us4.outblaze.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG PLEASE COPY tomoki@linuxmail.org FOR ANY REPLIES. NOT IN LIST. According to the release notes for STABLE, the wi drivers now support prism2 chips with wep. So I decided to try it out. well, I ran into a slight problem. The card with wep seems to work enough to get an ip with dhcp, but right after if I try to ping my gateway, I get a "no route to host" messages. any ideas? -tomoki -- Get your free email from www.linuxmail.org Powered by Outblaze To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:23: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.smed.com (mail.smed.com [64.46.248.225]) by hub.freebsd.org (Postfix) with ESMTP id D7ED637BA1E for ; Thu, 2 May 2002 13:19:42 -0700 (PDT) Received: from smtpgate.smshsc.net (unknown [165.226.204.25]) by mail.smed.com (Postfix) with ESMTP id 8976848055 for ; Thu, 2 May 2002 16:19:40 -0400 (EDT) Received: from iesa14.smshsc.net (iesa14.smshsc.net [165.226.204.44]) by smtpgate.smshsc.net (8.11.6/8.11.6) with ESMTP id g42KJeg30344 for ; Thu, 2 May 2002 16:19:40 -0400 Received: from mlvexc01.smshsc.net (unverified) by iesa14.smshsc.net (Content Technologies SMTPRS 2.0.15) with ESMTP id ; Thu, 02 May 2002 16:19:30 -0400 Received: by mlvexc01.usmlvv1p0a.smshsc.net with Internet Mail Service (5.5.2655.55) id <2X3CNMDX>; Thu, 2 May 2002 16:18:55 -0400 Message-Id: From: Warner Joseph To: "'Troy Barnhart'" Cc: "'mark.rowlands@minmail.net'" , "'FreeBSD-Questions@freebsd.org'" Subject: RE: Backing Up FreeBSD with ArcServe Date: Thu, 2 May 2002 16:19:22 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >Use the linux client (uagent.rpm) on your Arcserve2000 cd. >Also, check out CA's Brightstor for Linux package. Thanks Troy! This is exactly what I was looking for. I will assume that I need to install /usr/ports/archivers/rpm in order for this to work. We're getting ready to upgrade our install of ARCserve, so I'll probably wait until that happens before installing the agent. Joe -----Original Message----- From: Troy Barnhart [mailto:barney@RapidNet.com] Sent: Thursday, May 02, 2002 1:45 PM To: Warner Joseph Cc: mark.rowlands@minmail.net; FreeBSD-Questions@freebsd.org Subject: RE: Backing Up FreeBSD with ArcServe I'm running it. Use the linux client (uagent.rpm) on your Arcserve2000 cd. Also, check out CA's Brightstor for Linux package. I started out using arcserve because of it's capability to do AIX (for my work as a hospital sysadmin) and was a beta tester for the new brightstor product - ended up bringing a copy home and tested it w/ my freebsd boxes. samba has worked for me, also. barney > > > -----Original Message----- > From: Mark Rowlands [mailto:mark.rowlands@minmail.net] > Sent: Thursday, May 02, 2002 11:05 AM > To: Warner Joseph; 'FreeBSD-Questions@freebsd.org' > Subject: Re: Backing Up FreeBSD with ArcServe > > > On Thursday 02 May 2002 6:09 pm, Warner Joseph wrote: >> Is there anyone out there using ARCserve to backup FreeBSD? >> >> We have ARCserve running on a W2K server in conjunction with >> a Compaq DLT library system to get backups of all our W2K and >> NT servers. I should be able to install an agent on our FreeBSD (4.5 >> -STABLE) server and get backups of it as well but I don't >> know which agent we need. >> >> If anyone is using ARCserve to backup their FreeBSD boxen, a >> response would be much appreciated. >> > > could try the Microsoft Services for Unix product and nfs mount the > freebsd box or use samba on the freebsd box (which I have tested with > using Backup Exec) > > Yes, I've thought of trying that if I couldn't find an ARCserve > agent for FreeBSD. I did a Google search and found references to > a BSDI agent for ARCserve but couldn't find any references to this > agent over at ARCserve's site: > > http://www3.ca.com/Solutions/ProductFamily.asp?ID=115 > > > > whatever you choose to do....make sure you have a bootable disk / cd of > some > > variety for the 'bsd box so you can get it to the stage where you can > actually restore files!. Oh and actually test that you can restore > files. > > Yeah, that sounds like a given. > > Thanks for responding so quickly.. > > Joe > > > >> >> >> >> >> Joe Warner | Operations Technical Analyst II | Siemens Health Services >> | 215 N. Admiral Byrd Road | Salt Lake City, UT 84116 | Ph: >> 801-539-4978 | Fax: 801-533-8004 | >> Joe.Warner@smed.com >> >> >> >> >> >> >> > -------------------------------------------------------------------------- - >>---- This message and any included attachments are from Siemens Medical >> Solutions Health Services Corporation and are intended only for the >> addressee(s). The information contained herein may include trade >> secrets > or >> privileged or otherwise confidential information. Unauthorized >> review, forwarding, printing, copying, distributing, or using such >> information is strictly prohibited and may be unlawful. If you >> received this message in error, or have reason to believe you are not >> authorized to receive it, please promptly delete this message and >> notify the sender by e-mail with a copy to CSOffice@smed.com. Thank >> you > > > > -------------------------------------------------------------------------- ----- > This message and any included attachments are from Siemens Medical > Solutions Health Services Corporation and are intended only for the > addressee(s). The information contained herein may include trade > secrets or privileged or otherwise confidential information. > Unauthorized review, forwarding, printing, copying, distributing, or > using such information is strictly prohibited and may be unlawful. If > you received this message in error, or have reason to believe you are > not authorized to receive it, please promptly delete this message and > notify the sender by e-mail with a copy to CSOffice@smed.com. Thank > you > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message ------------------------------------------------------------------------------- This message and any included attachments are from Siemens Medical Solutions Health Services Corporation and are intended only for the addressee(s). The information contained herein may include trade secrets or privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you received this message in error, or have reason to believe you are not authorized to receive it, please promptly delete this message and notify the sender by e-mail with a copy to CSOffice@smed.com. Thank you To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:31:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from underfoot.windborne.net (blackfoot.windborne.net [65.174.117.130]) by hub.freebsd.org (Postfix) with ESMTP id AE5ED37B48A for ; Thu, 2 May 2002 13:30:47 -0700 (PDT) Received: from bean.inside (unknown [192.168.1.70]) by underfoot.windborne.net (Postfix) with ESMTP id D69611316E for ; Thu, 2 May 2002 16:30:41 -0400 (EDT) Received: by bean.inside (Postfix, from userid 10652) id 0632F5644; Thu, 2 May 2002 16:33:50 -0400 (EDT) Date: Thu, 2 May 2002 16:33:50 -0400 From: Branson Matheson To: freebsd-questions@freebsd.org Subject: Tapedrive Timeout Message-ID: <20020502163350.A634@windborne.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have: ast0: TAPE at ata1-slave using PIO4 on a 4.5-RELEASE box. I am using amanda to back-up my data.. sucessfully.. but I have a problem. One of my 'files' on the tapedrive is long. So long in fact.. that when amanda says 'seek to the next file' past this file.... and the kernel waits around for the seek to complete, the kernel timesout in the middle of the seek. SO I have good data.. just no good way to get to it. I have researched the mailing lists.. and there was a bug report round about FreeBSD-4.0 on this .. but it was closed and sent to sos. Never saw where it was solved. The problem apparently still exists. Anyone have any suggestions for solving this? .. I need to restore ;-) - branson ------------------------------------------------------------------------------- Branson Matheson " If you are falling off of a mountain, Systems Consultant You may as well try to fly." Windborne, Inc. - Delenn, Minbari Ambassador ( $statements = ) !~ /Company Opinion/; To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:35:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rapidnet.com (ns.rapidnet.com [64.251.173.97]) by hub.freebsd.org (Postfix) with ESMTP id 2B4A337B49D for ; Thu, 2 May 2002 13:35:07 -0700 (PDT) Received: from RapidNet.com (webmail.rapidnet.com [205.164.216.5]) by rapidnet.com (8.9.3/8.9.3) with SMTP id OAA08650; Thu, 2 May 2002 14:34:58 -0600 (MDT) From: Troy Barnhart Received: from 207.108.15.11 (SquirrelMail authenticated user barney) by webmail.rapidnet.com with HTTP; Thu, 2 May 2002 14:53:14 -0600 (MDT) Message-ID: <46356.207.108.15.11.1020372794.squirrel@webmail.rapidnet.com> Date: Thu, 2 May 2002 14:53:14 -0600 (MDT) Subject: OT: RE: Backing Up FreeBSD with ArcServe To: Joseph.Warner@siemens.com In-Reply-To: References: Cc: barney@rapidnet.com, mark.rowlands@minmail.net, FreeBSD-Questions@freebsd.org X-Mailer: SquirrelMail (version 1.0.3) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG minor additional fyi's. 1. my arcserve 2000 installation is patched to service pack 3 2. my win2k server is sp2 and an Active Directory Controller. 3. my FreeBSD box is 4.4 w/ the rpm package and linux compat. IIRC - as i did the setup last fall - I had to tweak the config's a bit after the install - Arcserve can be a bear to setup and use - but now i can backup all my windows, aix, and linux/freebsd in one console. working on getting the solaris and oracle stuff also... since you are from siemens... we will even be doing our PACS installation onto the SAN w/ arcserve products = only veritas and tivoli come close. anyone ever work any with Legato? regards, barney >>Use the linux client (uagent.rpm) on your Arcserve2000 cd. >>Also, check out CA's Brightstor for Linux package. > > Thanks Troy! This is exactly what I was looking > for. I will assume that I need to install > /usr/ports/archivers/rpm in order for this to > work. > > We're getting ready to upgrade our install of > ARCserve, so I'll probably wait until that > happens before installing the agent. > > Joe > > > -----Original Message----- > From: Troy Barnhart [mailto:barney@RapidNet.com] > Sent: Thursday, May 02, 2002 1:45 PM > To: Warner Joseph > Cc: mark.rowlands@minmail.net; FreeBSD-Questions@freebsd.org > Subject: RE: Backing Up FreeBSD with ArcServe > > > I'm running it. > > Use the linux client (uagent.rpm) on your Arcserve2000 cd. > Also, check out CA's Brightstor for Linux package. > > I started out using arcserve because of it's capability > to do AIX (for my work as a hospital sysadmin) and was a > beta tester for the new brightstor product - ended up bringing > a copy home and tested it w/ my freebsd boxes. > >samba has worked for me, also. > > barney > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:38: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (mc2-f4.law16.hotmail.com [65.54.237.11]) by hub.freebsd.org (Postfix) with ESMTP id DF1DA37B421 for ; Thu, 2 May 2002 13:37:54 -0700 (PDT) Received: from hotmail.com ([64.4.18.95]) by hotmail.com with Microsoft SMTPSVC(5.0.2195.4905); Thu, 2 May 2002 13:37:52 -0700 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 13:37:54 -0700 X-Originating-IP: [216.228.133.13] From: "default" To: "FreeBSD-Questions" Subject: Restricting PS Use Date: Thu, 2 May 2002 15:36:57 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 20:37:54.0775 (UTC) FILETIME=[3C977E70:01C1F219] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Is there a way on FreeBSD 4.1 to restrict PS use using sysctl? ... kern.ps is not a sysctl option in this dist. ... but it would seem that there should be another way to control this... does anyone know? Thanks P.S. Here is a listing of the kern options that I show in my man page... If there isn't one that controls PS, is there a way to upgrade sysctl without upgrading the rest of the o/s? Name Type Changeable kern.ostype string no kern.osrelease string no kern.osrevision integer no kern.version string no kern.maxvnodes integer yes kern.maxproc integer no kern.maxprocperuid integer yes kern.maxfiles integer yes kern.maxfilesperproc integer yes kern.argmax integer no kern.securelevel integer raise only kern.hostname string yes kern.hostid integer yes kern.clockrate struct no kern.posix1version integer no kern.ngroups integer no kern.job_control integer no kern.saved_ids integer no kern.boottime struct no kern.domainname string yes kern.filedelay integer yes kern.dirdelay integer yes kern.metadelay integer yes kern.osreldate string no kern.bootfile string yes kern.corefile string yes kern.logsigexit integer yes To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:48:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (oe51.law12.hotmail.com [64.4.18.40]) by hub.freebsd.org (Postfix) with ESMTP id DA71737B41C for ; Thu, 2 May 2002 13:48:37 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 13:48:37 -0700 X-Originating-IP: [216.228.133.13] From: "default" To: "FreeBSD-Questions" Subject: Fw: Restricting PS Use (update) Date: Thu, 2 May 2002 15:47:38 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 02 May 2002 20:48:37.0671 (UTC) FILETIME=[BBC9A370:01C1F21A] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG FYI, I found 3 kern.ps* settings using the sysctl -a command, but... I am unsure of what they do: kern.ps_strings: 3217031152 kern.ps_arg_cache_limit: 256 kern.ps_argsopen: 1 > Hi, > > Is there a way on FreeBSD 4.1 to restrict PS use using sysctl? ... kern.ps > is not a sysctl option in this dist. ... but it would seem that there should > be another way to control this... does anyone know? > > Thanks > > P.S. Here is a listing of the kern options that I show in my man page... If > there isn't one that controls PS, is there a way to upgrade sysctl without > upgrading the rest of the o/s? > > Name Type Changeable > kern.ostype string no > kern.osrelease string no > kern.osrevision integer no > kern.version string no > kern.maxvnodes integer yes > kern.maxproc integer no > kern.maxprocperuid integer yes > > kern.maxfiles integer yes > kern.maxfilesperproc integer yes > kern.argmax integer no > kern.securelevel integer raise only > kern.hostname string yes > kern.hostid integer yes > kern.clockrate struct no > kern.posix1version integer no > kern.ngroups integer no > kern.job_control integer no > kern.saved_ids integer no > kern.boottime struct no > kern.domainname string yes > kern.filedelay integer yes > kern.dirdelay integer yes > kern.metadelay integer yes > kern.osreldate string no > kern.bootfile string yes > kern.corefile string yes > kern.logsigexit integer yes > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:52:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ddt.demos.su (ddt.demos.su [194.87.13.37]) by hub.freebsd.org (Postfix) with ESMTP id EA8B937B405 for ; Thu, 2 May 2002 13:52:49 -0700 (PDT) Received: (from fido7@localhost) by ddt.demos.su (8.11.6/8.11.1/D) id g42KqmW81077; Fri, 3 May 2002 00:52:48 +0400 (MSD) (envelope-from errors@fido7.ru) Date: Fri, 3 May 2002 00:52:48 +0400 (MSD) Message-Id: <200205022052.g42KqmW81077@ddt.demos.su> To: questions@FreeBSD.org From: Fido7 Auto Moderator Reply-To: "Do not reply, write a new message": ; Subject: Registration result from fido7 gateway Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear madam or sir! You are reading an automated reply from the fido7 automoderator. Your registration request was received from the address: questions@FreeBSD.org The result of the request is: Access closed: Not registered yet (Your magic number is 1779616758) -- If you have troubles registering with fido7 automoderator, please see http://www.fido7.ru/ If this does not help, please contact the human operator at . To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 13:58:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cmailg7.svr.pol.co.uk (cmailg7.svr.pol.co.uk [195.92.195.177]) by hub.freebsd.org (Postfix) with ESMTP id 1F3FE37B404 for ; Thu, 2 May 2002 13:58:33 -0700 (PDT) Received: from [195.92.67.23] (helo=mail18.svr.pol.co.uk) by cmailg7.svr.pol.co.uk with esmtp (Exim 3.35 #1) id 173Nej-00044o-01; Thu, 02 May 2002 21:58:25 +0100 Received: from modem-495.bonobo.dialup.pol.co.uk ([217.134.49.239] helo=lineone.net) by mail18.svr.pol.co.uk with esmtp (Exim 3.35 #1) id 173Neh-0002PJ-00; Thu, 02 May 2002 21:58:23 +0100 Message-ID: <3CD1A85C.CCAEC2E8@lineone.net> Date: Thu, 02 May 2002 21:58:04 +0100 From: Jean-Mark Dupoux X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: ak015c4056@blueyonder.co.uk, questions@freebsd.org Subject: re: Mac&Tosh Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Aedan You cant run any kind of BSD on a Mac, unless you have some kind of PC emulation software (VMware, Virtual PC etc) but that would be extremely resource hungry and defeat the whole purpose probably Didnt realize Athlon was really part of the K6 family, but all AMD chips are good. Try the mobile mailing list for specifics on your model laptop though mark jmdupoux_@_lineone.net > I have a mac 8500, newer366 g3 card/xlr8 drivers/voodoo5 card-freebsd, > netbsd or openbsd? > Also a Toshiba 2540 CDS,athlon K6,is this a viable bsd box > Plan would be to use toshiba as router > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14: 1:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id 806E837B41B for ; Thu, 2 May 2002 14:01:37 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g42KwrL97415; Thu, 2 May 2002 17:58:54 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Thu, 2 May 2002 17:58:53 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: Walid Nehme Cc: Subject: Re: ipfw and ipfilter In-Reply-To: <20020502182226.48214.qmail@web10007.mail.yahoo.com> Message-ID: <20020502175306.C97354-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002, Walid Nehme wrote: > what is better, ipfw or ipfilter, Define better. They're both very good packet filters. There are some things you can do in ipf which you can't do in ipfw and vice versa. > and which is newer? They're both actively maintained. So, I think neither is newer. > which is faster to nat with? I haven't done any scientific tests to prove it, but I supose ipnat is faster than natd, because ipnat runs in kernel mode and natd runs in user space, so you need to copy the packets from kernel to userspace and back. You need to try both and use the one which fits your needs better. Fer > > ===== > Regards. > Walid Nehme > ICQ:5855336 > MSN:nastylid@hotmail.com > my homepage http://gayana.kharkov.com/Start.html > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14: 2:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from its-mail1.massey.ac.nz (its-mail1.massey.ac.nz [130.123.128.11]) by hub.freebsd.org (Postfix) with ESMTP id 8C23F37B400 for ; Thu, 2 May 2002 14:02:48 -0700 (PDT) Received: from its-mm1.massey.ac.nz (its-mm1.massey.ac.nz [130.123.128.45]) by its-mail1.massey.ac.nz (8.9.3/8.9.3) with ESMTP id JAA20361 for ; Fri, 3 May 2002 09:02:43 +1200 (NZST) Received: from its-xchg2.massey.ac.nz (not verified[130.123.128.28]) by its-mm1.massey.ac.nz with MailMarshal (4,2,5,0) id ; Fri, 03 May 2002 09:02:43 +1200 Received: by its-xchg2.massey.ac.nz with Internet Mail Service (5.5.2655.55) id ; Fri, 3 May 2002 09:02:43 +1200 Message-ID: <98B01D2717B9D411B38F0008C7840931057F37EE@its-xchg2.massey.ac.nz> From: "Defryn, Guy" To: "'freebsd-questions@FreeBSD.ORG'" Subject: mysql install problem Date: Fri, 3 May 2002 09:02:42 +1200 X-MS-TNEF-Correlator: <98B01D2717B9D411B38F0008C7840931057F37EE@its-xchg2.massey.ac.nz> MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: multipart/mixed; boundary="----_=_NextPart_000_01C1F21C.B39E59F0" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C1F21C.B39E59F0 Content-Type: text/plain I have been trying to install mysql on my freebsd box and it does not seem to work. I cannot use the ports on this box I have followed everything step by step as described in three books/manuals -I downloaded mysql-3.23.49-unknown-freebsdelf4.4-i386.tar.gz from the mysqlsite and copy it to /tmp directory -I ran tar tzvf mysql-3.23.49-unknown-freebsdelf4.4-i386.tar.gz and a directory with the same name gets created -According to my manuals the following steps are to run ./ configure -prefix=/usr/local/mysql and than the commands make and make install. The configure scripts run but a /usr/local/mysql does not get created and it won't let me run make and make install. Does any know how can get it to go? Also how can I delete non-empty directories? ------_=_NextPart_000_01C1F21C.B39E59F0 Content-Type: application/ms-tnef Content-Transfer-Encoding: base64 eJ8+IiwVAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQWAAwAOAAAA0gcFAAMACQACACoABQAbAQEggAMADgAAANIHBQAD AAkAAgArAAUAHAEBCYABACEAAAA3NThERTkzRkE3RDBFRTQ2ODU2RDM0OEE3NTBGRjEzRABWBwEE gAEAFgAAAG15c3FsIGluc3RhbGwgcHJvYmxlbQBeCAENgAQAAgAAAAIAAgABA5AGADwIAAAxAAAA AwA2AAAAAAADAACACCAGAAAAAADAAAAAAAAARgAAAABShQAA45ABAB4AAYAIIAYAAAAAAMAAAAAA AABGAAAAAFSFAAABAAAABQAAADEwLjAAAAAACwACgAggBgAAAAAAwAAAAAAAAEYAAAAABoUAAAAA AAADAAOACCAGAAAAAADAAAAAAAAARgAAAAABhQAAAAAAAEAAK4AIIAYAAAAAAMAAAAAAAABGAAAA AGCFAAAAxDUIk///HwsABIAIIAYAAAAAAMAAAAAAAABGAAAAAAOFAAAAAAAACwAFgAggBgAAAAAA wAAAAAAAAEYAAAAADoUAAAAAAAADAAaACCAGAAAAAADAAAAAAAAARgAAAAAQhQAAAAAAAAMACIAI IAYAAAAAAMAAAAAAAABGAAAAABiFAAAAAAAACwAQgAggBgAAAAAAwAAAAAAAAEYAAAAAgoUAAAAA AAACAQkQAQAAALkCAAC1AgAAiwQAAExaRnWU6FfzAwAKAHJjcGcxMjXiMgNDdGV4BUEBAwH3TwqA AqQD4wIAY2gKwHPwZXQwIAcTAoAP8wBQfwRWCFUHshHFDlEDARDHMvcGAAbDEcUzBEYQyRLbEdPb CO8J9zsYvw4wNRHCDGDOYwBQCwkBZDM2EVALpgggSSAQ8HZlIGKhCeEgdHJ5C4BnHkBUbyALgHMB kGwDIG24eXNxAyACIB9hIANQEQngYnNkHfBveCBLAHAgkGkFQGRvB5Fupm8FQBEgZW0esncFsLRr Lh2BYwBwIbJ1ESD1HkBoHeBwGGEEIB/RI6D/BAAgogqiCoQKgB2VAhAfQORvdwmAIGUd0B5gJHFz HpEfEGVwHfAgECdjYf8EIAEABPIeACERJFIJ0SCh0G9rcy8DgXUHQBCwNyUJCuMlNi0dkCFRd24d GFBhAQAgkB9zLTMuAjItQDQ5LXVuawshsCxQLSA1ZWxmNIEtgC1pMzg2LgGQ8HIuZ3ogIQNwI5Mf c+8AkA6wIOMFoHAgECExHsFIL3RtJ5BkaRjAY3cewB5gKz1yA5EvcR5Aerx2ZizfLe8u/SDyYTJI yyJgITBoI5NzYQeAIaCdOUJnETAEIAUAZWEOsPMLMStZQWMFoTJQHpQgAf8p9SOTJiQnJgQgCsAj gR7QInI1gCAuLzFBbmYMaWcIcB3gXCc5NkZwGMA/MHg9LyNgcvYvGFAi8Gwp4B+DIPIjoNcz4iOx BaBtA4FkBCAAwG5rMPRCwx71LipvJTZUn0IDPyYE9AQgPpJidQVA/zfgQF8hZznROhYg5iJwC5D1 P7AyBUBsSWE5UT6SQs/7Q98rK0QhcgBwIBA1oh2gj09hIvFJQzGkZ28/EWD/KkAe0E+WHZA2YREw OWECID4tIhAFMCAQMlYIkHM/EyT6VB8KfVWgAAAAHgBwAAEAAAAWAAAAbXlzcWwgaW5zdGFsbCBw cm9ibGVtAAAAAgFxAAEAAAAbAAAAAcHmO1XpaeUrQzujQmuIBgBSvEytDAL4PW8AAAMAJgAAAAAA AwAuAAAAAAALAAIAAQAAAAMACVkBAAAAHgBCEAEAAAA3AAAAPFBpbmUuQlNGLjQuMjEuMDIwNDE3 MTIwODE3MC4yMTA1NC0xMDAwMDBAd29ua2l0eS5jb20+AAADAN4/n04AAEAAOQDwWZ6zHPLBAQMA 8T8JBAAAHgAxQAEAAAALAAAARy5QLkRFRlJZTgAAAwAaQAAAAAAeADBAAQAAAAsAAABHLlAuREVG UllOAAADABlAAAAAAAMA/T/kBAAAAwCAEP////8DAJIQAQAAAAIBRwABAAAALgAAAGM9Tlo7YT1N QVNTRVk7bD1JVFMtWENIRzItMDIwNTAyMjEwMjQyWi02MTIyMwAAAAIB+T8BAAAAVwAAAAAAAADc p0DIwEIQGrS5CAArL+GCAQAAAAAAAAAvTz1NQVNTRVkgVU5JVkVSU0lUWS9PVT1NQVNTRVkvQ049 UkVDSVBJRU5UUy9DTj1HLlAuREVGUllOAAAeAPg/AQAAAAwAAABEZWZyeW4sIEd1eQAeADhAAQAA AAsAAABHLlAuREVGUllOAAACAfs/AQAAAFcAAAAAAAAA3KdAyMBCEBq0uQgAKy/hggEAAAAAAAAA L089TUFTU0VZIFVOSVZFUlNJVFkvT1U9TUFTU0VZL0NOPVJFQ0lQSUVOVFMvQ049Ry5QLkRFRlJZ TgAAHgD6PwEAAAAMAAAARGVmcnluLCBHdXkAHgA5QAEAAAALAAAARy5QLkRFRlJZTgAAQAAHMA5q gHcc8sEBQAAIMN8Ku7Mc8sEBHgA9AAEAAAABAAAAAAAAAB4AHQ4BAAAAFgAAAG15c3FsIGluc3Rh bGwgcHJvYmxlbQAAAB4ANRABAAAAQgAAADw5OEIwMUQyNzE3QjlENDExQjM4RjAwMDhDNzg0MDkz MTA1N0YzN0VFQGl0cy14Y2hnMi5tYXNzZXkuYWMubno+AAAACwApAAAAAAALACMAAAAAAAMABhDm fmqjAwAHEGoCAAADABAQAAAAAAMAERAAAAAAHgAIEAEAAABlAAAASUhBVkVCRUVOVFJZSU5HVE9J TlNUQUxMTVlTUUxPTk1ZRlJFRUJTREJPWEFORElURE9FU05PVFNFRU1UT1dPUktJQ0FOTk9UVVNF VEhFUE9SVFNPTlRISVNCT1hJSEFWRUZPTAAAAAACAX8AAQAAAEIAAAA8OThCMDFEMjcxN0I5RDQx MUIzOEYwMDA4Qzc4NDA5MzEwNTdGMzdFRUBpdHMteGNoZzIubWFzc2V5LmFjLm56PgAAALvi ------_=_NextPart_000_01C1F21C.B39E59F0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14: 8:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cyberion.pl (cyberion.pl [212.127.82.2]) by hub.freebsd.org (Postfix) with SMTP id 99F9737B400 for ; Thu, 2 May 2002 14:08:42 -0700 (PDT) Received: (qmail 31553 invoked from network); 2 May 2002 21:06:23 -0000 Received: from pd77.poznan.sdi.tpnet.pl (HELO najl) (nailer@213.76.221.77) by cyberion.pl with SMTP; 2 May 2002 21:06:23 -0000 Message-ID: <000501c1ae91$cbc54a80$0200a8c0@najl> From: "najl" To: "freebsd help" Subject: freebsd install problem Date: Tue, 5 Feb 2002 23:09:28 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG During the installation, on the debbuging console I get huge amount of such errors : > >/stand/cpio: invalid header : checksum error >/stand/cpio: warning: skipped [big number;)] bytes of junk >/stand/cpio: : No such file or directory > After few minutes, on main screen, I get a message : > >panic:lockmgr:non-zero exclusive count > >syncing disks... panic: locked buf >Uptime: 7m54s >Automatic reboot in 15 seconds - press a key on the console to abort > I have tested all hardware, it seems to be ok and the Windows98 and Windows2k work fine. Please help meeee! Karol Bonenberg To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14:11:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kpax.icsmx.com (kpax.icsmx.com [200.33.246.13]) by hub.freebsd.org (Postfix) with ESMTP id 3DFC837B400 for ; Thu, 2 May 2002 14:11:02 -0700 (PDT) Received: from piii.intranet.com.mx ([200.33.246.4]) by kpax.icsmx.com (8.11.6/8.11.6) with ESMTP id g42L8XV08826 for ; Thu, 2 May 2002 16:08:33 -0500 (CDT) (envelope-from jbiquez@icsmx.com) Message-Id: <5.1.0.14.2.20020502160148.03248c50@icsmx.com> X-Sender: jbiquez@icsmx.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 16:09:04 -0500 To: freebsd-questions@FreeBSD.ORG From: Jorge Biquez Subject: FTP on 4.4.STABLE with problems? Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====================_18609797==_.ALT" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=====================_18609797==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Hello all. On the company I'm working a client asked for a server for their simple and plain web pages. They asked for an FTP account and Apache configured. They have been working without problems. Since last month a new area of the IT department is "auditing" the server remotely and are asking for fixing the things they found wrong (or they believe it is wrong). According to them the FTP that is running by default on the 4.4.-STABLE version has problems. "Their automated report says it". I'm including the message they sent me at the end of this email. Any similar experiences on this? What have you done with clients like this that think that "the server they ordered to configure is wrong configured"?. Does the FTP really need to be fixed? Thanks in advance for your comments on the FTP issue also. Jorge Biquez -------This is what they sent me as result of their auditing----- FTPD glob Heap Corruption ftp (21/tcp) You seem to be running an FTP server which is vulnerable to the 'glob heap corruption' flaw. An attacker may use this problem to execute arbitrary commands on this host. *** As Nessus solely relied on the banner of the server to issue this warning, *** so this alert might be a false positive Solution : Upgrade your ftp server software to the latest version. Risk factor : High CVE : CAN-2001-0550 Related Security Advisory Cross Reference(s) Common Vulnerability Exposure (CVE) ID: CAN-2001-0550 http://www.securityfocus.com/archive/82/180823 Bugtraq mailing list: 20011128 CORE-20011001: Wu-FTP glob heap corruption vulnerability http://marc.theaimsgroup.com/?l=bugtraq&m=100700363414799&w=2 Cert/CC Advisory: CA-2001-33 http://www.cert.org/advisories/CA-2001-33.html CERT/CC vulnerability note: VU#886083 http://www.kb.cert.org/vuls/id/886083 RedHat Security Advisories: RHSA-2001-157 http://www.redhat.com/support/errata/RHSA-2001-157.html Caldera Security Advisory: CSSA-2001-041.0 http://www.caldera.com/support/security/advisories/CSSA-2001-041.0.txt http://www.linux-mandrake.com/en/security/2001/MDKSA-2001-090.php3 HPdes Security Advisory: HPSBUX0107-162 ISS Security Advisory: 20011129 WU-FTPD Heap Corruption Vulnerability BugTraq ID: 3581 http://www.securityfocus.com/bid/3581 ------------------------------------------------- --=====================_18609797==_.ALT Content-Type: text/html; charset="us-ascii" Hello all.

On the company I'm working a client asked for a server for their simple and plain web pages. They asked for an FTP account and Apache configured. They have been working without problems. Since last month a new area of the IT department is "auditing" the server remotely and are asking for fixing the things they found wrong (or they believe it is wrong). According to them the FTP that is running by default on the 4.4.-STABLE version has problems. "Their automated report says it". I'm including the message they sent me at the end of this email.
Any similar experiences on this?
What have you done with clients like this that think that "the server they ordered to configure is wrong configured"?.
Does the FTP really need to be fixed?

Thanks in advance for your comments on the FTP issue also.

Jorge Biquez


-------This is what they sent me as result of their auditing-----
FTPD glob Heap Corruption
ftp (21/tcp)
You seem to be running an FTP server which is vulnerable to the
'glob heap corruption' flaw.
An attacker may use this problem to execute arbitrary commands on this host.

*** As Nessus solely relied on the banner of the server to issue this warning,
*** so this alert might be a false positive

Solution : Upgrade your ftp server software to the latest version.
Risk factor : High

CVE : CAN-2001-0550
Related Security Advisory Cross Reference(s)
Common Vulnerability Exposure (CVE) ID: CAN-2001-0550
http://www.securityfocus.com/archive/82/180823
Bugtraq mailing list: 20011128 CORE-20011001: Wu-FTP glob heap corruption vulnerability
http://marc.theaimsgroup.com/?l=bugtraq&m=100700363414799&w=2
Cert/CC Advisory: CA-2001-33
http://www.cert.org/advisories/CA-2001-33.html
CERT/CC vulnerability note: VU#886083
http://www.kb.cert.org/vuls/id/886083
RedHat Security Advisories: RHSA-2001-157
http://www.redhat.com/support/errata/RHSA-2001-157.html
Caldera Security Advisory: CSSA-2001-041.0
http://www.caldera.com/support/security/advisories/CSSA-2001-041.0.txt
http://www.linux-mandrake.com/en/security/2001/MDKSA-2001-090.php3
HPdes Security Advisory: HPSBUX0107-162
ISS Security Advisory: 20011129 WU-FTPD Heap Corruption Vulnerability
BugTraq ID: 3581
http://www.securityfocus.com/bid/3581
-------------------------------------------------
--=====================_18609797==_.ALT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14:18:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web20513.mail.yahoo.com (web20513.mail.yahoo.com [216.136.174.44]) by hub.freebsd.org (Postfix) with SMTP id 92B0C37B404 for ; Thu, 2 May 2002 14:18:47 -0700 (PDT) Message-ID: <20020502211847.21064.qmail@web20513.mail.yahoo.com> Received: from [136.185.151.143] by web20513.mail.yahoo.com via HTTP; Thu, 02 May 2002 14:18:47 PDT Date: Thu, 2 May 2002 14:18:47 -0700 (PDT) From: Bryan Curl Subject: Re: Re: Boot Manager Conversion To: Shantanu , RichardH , "freebsd-questions@freebsd.org" In-Reply-To: <3AEEFD90.8635D040@ieee.org> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1025858312-1020374327=:18429" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0-1025858312-1020374327=:18429 Content-Type: text/plain; charset=us-ascii At any rate, shouldn't I run fdisk and make my FreeBSD drive non-bootable? Can't have two boot drives in one system... windoze wouldn't like that after all. -.. . -. ----- .-.. ..- ..-. Shantanu wrote: Hi! If you have windows, why not try XOSL -- eXtended OS Loader. URL is http://www.xosl.org Its quite good and will be easy to load as compared to lilo. Regards, ... .... .- -. - .- -. ..- Mucho Gratis Bryan --bc3910@yahoo.com --------------------------------- Do You Yahoo!? Yahoo! Health - your guide to health and wellness --0-1025858312-1020374327=:18429 Content-Type: text/html; charset=us-ascii

At any rate, shouldn't I run fdisk and make my FreeBSD drive non-bootable?

Can't have two boot drives in one system... windoze wouldn't like that after all.

-.. .   -.   -----   .-..   ..-   ..-.

  Shantanu <shantanoo@ieee.org> wrote:

Hi!
If you have windows, why not try XOSL -- eXtended OS Loader.
URL is http://www.xosl.org
Its quite good and will be easy to load as compared to lilo.

Regards,
... .... .- -. - .- -. ..-


Mucho Gratis
Bryan
--bc3910@yahoo.com


Do You Yahoo!?
Yahoo! Health - your guide to health and wellness --0-1025858312-1020374327=:18429-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14:38:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unix.pciway.com (w050.z065104054.lax-ca.dsl.cnc.net [65.104.54.50]) by hub.freebsd.org (Postfix) with ESMTP id ECD2D37B41A for ; Thu, 2 May 2002 14:38:12 -0700 (PDT) Received: from unix.pciway.com (localhost.pciway.com [127.0.0.1]) by unix.pciway.com (8.12.2/8.11.1) with ESMTP id g42Lc8uo062412 for ; Thu, 2 May 2002 14:38:12 -0700 (PDT) (envelope-from loren@pciway.com) Received: from localhost (loren@localhost) by unix.pciway.com (8.12.2/8.12.2/Submit) with ESMTP id g42Lc71j062409 for ; Thu, 2 May 2002 14:38:08 -0700 (PDT) X-Authentication-Warning: unix.pciway.com: loren owned process doing -bs Date: Thu, 2 May 2002 14:38:07 -0700 (PDT) From: Loren Koss To: freebsd-questions@freebsd.org Subject: poptop problem.. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I know there is a mailing list for poptop but it doesn't look like anyone responds.. I don't want to waste bandwidth on this list unnecessarily, so if anyone has any experience with this app, could you please email me as I am having some difficulty with it and really want to get it working. Thanks Loren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14:52:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from roc-66-66-72-6.rochester.rr.com (roc-66-66-72-6.rochester.rr.com [66.66.72.6]) by hub.freebsd.org (Postfix) with ESMTP id 80E2037B41D for ; Thu, 2 May 2002 14:52:47 -0700 (PDT) Received: by roc-66-66-72-6.rochester.rr.com (Postfix, from userid 1000) id 3DE78901A00; Thu, 2 May 2002 17:52:19 -0400 (EDT) Date: Thu, 2 May 2002 17:52:19 -0400 From: mpd To: Jean-Mark Dupoux Cc: ak015c4056@blueyonder.co.uk, questions@FreeBSD.ORG Subject: Re: Mac&Tosh Message-ID: <20020502175219.A32601@rochester.rr.com> References: <3CD1A85C.CCAEC2E8@lineone.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <3CD1A85C.CCAEC2E8@lineone.net>; from jmdupoux@lineone.net on Thu, May 02, 2002 at 09:58:04PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Please don't top-post. On Thu, May 02, 2002 at 09:58:04PM +0100, Jean-Mark Dupoux wrote: > Hello Aedan > > You cant run any kind of BSD on a Mac, unless you have some kind of PC > emulation software (VMware, Virtual PC etc) but that would be extremely > resource hungry and defeat the whole purpose probably Wrong. NetBSD will certainly run on this hardware. OpenBSD might, as well. FreeBSD will not. > > Didnt realize Athlon was really part of the K6 family, but all AMD > chips are good. Try the mobile mailing list for specifics on your > model laptop though > > > mark > jmdupoux_@_lineone.net > > > > I have a mac 8500, newer366 g3 card/xlr8 drivers/voodoo5 card-freebsd, > > netbsd or openbsd? See above. > > Also a Toshiba 2540 CDS,athlon K6,is this a viable bsd box > > Plan would be to use toshiba as router This should work fine with any of the BSDs, include FreeBSD. mike -- ___________________________________________________________ "YOU CAN NOT BUY AN EIGHT FOOT TALL CRIME FIGHTING ROBOT UNLESS YOU ARE A LAW ENFORCEMENT OFFICER!!!" - Pokey the Penguin from "REQUEST DENIED THEN GRANTED" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 14:57: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id CB16237B417 for ; Thu, 2 May 2002 14:57:05 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.36.105]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Thu, 2 May 2002 17:55:36 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Date: Thu, 2 May 2002 17:57:01 -0400 X-Mailer: KMail [version 1.2] References: <02050211025001.04136@fcoffice.ptfd.org> <02050215351700.04429@fcoffice.ptfd.org> <20020502201301.9467B37B449@hub.freebsd.org> In-Reply-To: <20020502201301.9467B37B449@hub.freebsd.org> MIME-Version: 1.0 Message-Id: <02050217570103.04429@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG OK changed tyhe /sbin/dmersg to executable by root. I noticed alot of other files are not in /sbin. I wonder if this is my problem. I'll post the dmesg as soon as I figure out how to send dmesg to a text file so I can get it and mail it. Mike however the only thing I see there that looks out of the ordinary is some time-outs on ata1, which is only the cdrom drive. I just wonder how the permissions on this machine could have gotten dorked? Mike On Thursday 02 May 2002 16:07, you wrote: > On May 02 at 15:35, Michael W.Holdeman spoke: > > Hmm... cat /var/log/messages looks normal (cept what is a malloc disk?) > > but dmesg just yeilds 644, and thats it? > > I don't understand this either. Is /sbin/dmesg not executable (chmod +x)? > Or is a file called dmesg in your current directory? (Use > /sbin/dmesg.) > You don't mind to post these lines here? > > -Hanspeter > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15: 0:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id BA41837B416 for ; Thu, 2 May 2002 15:00:42 -0700 (PDT) Received: from fcoffice.ptfd.org (unverified [12.162.36.105]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Thu, 2 May 2002 17:59:14 -0400 Content-Type: text/plain; charset="iso-8859-1" From: Michael W.Holdeman Organization: PTFD To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Date: Thu, 2 May 2002 18:00:38 -0400 X-Mailer: KMail [version 1.2] References: <02050211025001.04136@fcoffice.ptfd.org> <02050215351700.04429@fcoffice.ptfd.org> <20020502201301.9467B37B449@hub.freebsd.org> In-Reply-To: <20020502201301.9467B37B449@hub.freebsd.org> MIME-Version: 1.0 Message-Id: <02050218003804.04429@fcoffice.ptfd.org> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Everything in /sbin is -r-xr-xr-x ? Mike On Thursday 02 May 2002 16:07, you wrote: > On May 02 at 15:35, Michael W.Holdeman spoke: > > Hmm... cat /var/log/messages looks normal (cept what is a malloc disk?) > > but dmesg just yeilds 644, and thats it? > > I don't understand this either. Is /sbin/dmesg not executable (chmod +x)? > Or is a file called dmesg in your current directory? (Use > /sbin/dmesg.) > You don't mind to post these lines here? > > -Hanspeter > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15: 4:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hobbiton.shire.net (frogmorton.shire.net [204.228.145.136]) by hub.freebsd.org (Postfix) with ESMTP id 2A94E37B416 for ; Thu, 2 May 2002 15:04:34 -0700 (PDT) Received: from [68.64.98.90] (helo=localhost) by hobbiton.shire.net with asmtp (Exim 3.22 #6) id 173Ogz-000PZ0-00; Thu, 02 May 2002 16:04:49 -0600 Date: Thu, 2 May 2002 18:04:30 -0400 Subject: Re: Mac&Tosh Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v481) Cc: ak015c4056@blueyonder.co.uk, questions@freebsd.org To: Jean-Mark Dupoux From: "Chad Leigh -- Shire.Net LLC" In-Reply-To: <3CD1A85C.CCAEC2E8@lineone.net> Message-Id: <939D4E8A-5E18-11D6-827D-000502EDE760@shire.net> Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.481) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday, May 2, 2002, at 04:58 , Jean-Mark Dupoux wrote: > Hello Aedan > > You cant run any kind of BSD on a Mac, unless you have some kind of PC > emulation software (VMware, Virtual PC etc) but that would be extremely > resource hungry and defeat the whole purpose probably This is not true. Besides running OS X[1] (which is a BSD operating system on a mach kernel), you can run OpenBSD (http://www.openbsd.org/plat.html) and NetBSD (http://www.netbsd.org/) . I have not done this, but both web pages list Mac PPC as a supported platform. best Chad [1] Yes, you can run OS X in an unsupported fashion on an 8500. Aee http://www.macsales.com and go their OS X center and check out XPostfacto. > > Didnt realize Athlon was really part of the K6 family, but all AMD > chips are good. Try the mobile mailing list for specifics on your > model laptop though > > > mark > jmdupoux_@_lineone.net > > >> I have a mac 8500, newer366 g3 card/xlr8 drivers/voodoo5 card-freebsd, >> netbsd or openbsd? >> Also a Toshiba 2540 CDS,athlon K6,is this a viable bsd box >> Plan would be to use toshiba as router >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15: 7:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.simrad.no (mail.simrad.no [193.69.73.2]) by hub.freebsd.org (Postfix) with ESMTP id 57F0037B41F for ; Thu, 2 May 2002 15:07:24 -0700 (PDT) To: freebsd-questions@FreeBSD.ORG Subject: Re: sane & scanner problem MIME-Version: 1.0 X-Mailer: Lotus Notes Build M11_11052001 Beta 4 November 05, 2001 Message-ID: From: chip.wiegand@simrad.com Date: Thu, 2 May 2002 15:07:57 -0700 X-MIMETrack: Serialize by Router on S_INET01/S_EXT(Release 5.0.6a |January 17, 2001) at 03.05.2002 00:08:04, Serialize complete at 03.05.2002 00:08:04 Content-Type: text/plain; charset="US-ASCII" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Warren Block wrote on 04/29/2002 04:49:45 PM: > On Mon, 29 Apr 2002 chip.wiegand@simrad.com wrote: > > > I have an HP scanner that is supported by Sane, connected by USB to > > my FBSD-4.5R box. I installed sane-frontends and sane-backends and > > xsane. When I run gimp - menu item Extns/Acquire Image/Settings, I > > get a message on the screen 'xcanimage: no scanners were identified. > > If you were expecting something differant check to make sure the > > scanner is plugged in, turned on and detected by sane-find-scanner > > (if appropriate)...' I ran sane-find-scanner as root and it finds, > > but doesn't identify, the scanner on uscanner0. How do I get it to > > identify my scanner so it can be used? > > cd to /usr/local/etc/sane.d and look at hp.conf. You'll probably need > to add > > usb /dev/uscanner0 > > to that file. > -Warren Block * Rapid City, South Dakota USA I added that line, or rather modified the original. It still does not work. Would it be any better to set up a scsi card in this machine and connect it to that? -- chip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15:11:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 5FA4537B400 for ; Thu, 2 May 2002 15:11:43 -0700 (PDT) Received: from tim.dynofrog.com (dhcp065-031-025-171.insight.rr.com [65.31.25.171]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id g42MBgw21412 for ; Thu, 2 May 2002 18:11:42 -0400 (EDT) Date: Thu, 2 May 2002 18:13:21 -0400 From: Tim Boring To: questions@FreeBSD.ORG Subject: problem with evolution mail component Message-ID: <20020502181321.C1158@tim.dynofrog.com> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Balsa 1.3.0 Lines: 27 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG When I try to "send/receive" evo downloads the first 30 of 40 messages then quits with this message: "The Evolution component that handles folders of type 'mail' has unexpectedly quit. You will need to quit Evolution and restart in order to access that data again." This is occurring on a fresh install of 4.5-Release with the Generic kernel. After the install I restored my $HOME/evolution folder from backup and everything was working fine...even at lunch-time today. In the meantime, here's what I've done to try to fix this problem: 1. Closed evolution; ran "killev"; restarted evolution and tried "sending/receiving" again...still hung on d/l message 30 of 40 with same err msg. as above. 2. Copied $HOME/evolution to $HOME/evolution.bak; then restarted to try to recreate the account...didn't get the first-time druid, instead had email but only inbox folder (no subfolders). still hung with above err msg. 3. For kicks, rebooted the machine. then when i started evo it prompted me to complete the first-time druid. did so but still hung with above err mesg. Any ideas on what's going on here? Thanks, Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15:14:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id CA74737B416 for ; Thu, 2 May 2002 15:14:47 -0700 (PDT) Received: (from dan@localhost) by dan.emsphone.com (8.12.2/8.12.3) id g42MElgS030040; Thu, 2 May 2002 17:14:47 -0500 (CDT) (envelope-from dan) Date: Thu, 2 May 2002 17:14:46 -0500 From: Dan Nelson To: Jorge Biquez Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FTP on 4.4.STABLE with problems? Message-ID: <20020502221445.GG70810@dan.emsphone.com> References: <5.1.0.14.2.20020502160148.03248c50@icsmx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.2.20020502160148.03248c50@icsmx.com> User-Agent: Mutt/1.3.28i X-OS: FreeBSD 5.0-CURRENT X-message-flag: Outlook Error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In the last episode (May 02), Jorge Biquez said: > On the company I'm working a client asked for a server for their > simple and plain web pages. They asked for an FTP account and Apache > configured. They have been working without problems. Since last month > a new area of the IT department is "auditing" the server remotely and > are asking for fixing the things they found wrong (or they believe it > is wrong). According to them the FTP that is running by default on > the 4.4.-STABLE version has problems. "Their automated report says > it". I'm including the message they sent me at the end of this email. > Any similar experiences on this? What have you done with clients like > this that think that "the server they ordered to configure is wrong > configured"?. Tell them to read the nessus report: > -------This is what they sent me as result of their auditing----- > FTPD glob Heap Corruption ftp (21/tcp) You seem to be running an FTP > server which is vulnerable to the 'glob heap corruption' flaw. An > attacker may use this problem to execute arbitrary commands on this > host. > > *** As Nessus solely relied on the banner of the server to issue this > *** warning, so this alert might be a false positive With the 'only safe tests' flag turned on, nessus doesn't actually test for bugs; it just checks banner strings and version numbers. FreeBSD's FTP client has always reported 220 hostname FTP server (Version 6.00LS) ready. and nessus checks that and says "possibly buggy". This bug was fixed in FreeBSD's stock ftpd prior to the release of FreeBSD 4.3. ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-01:33.ftpd-glob.v1.1.asc -- Dan Nelson dnelson@allantgroup.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15:24:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 908B437B423 for ; Thu, 2 May 2002 15:23:45 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g42MNaU03015; Thu, 2 May 2002 18:23:37 -0400 Message-ID: <3CD1BDA2.3000904@potentialtech.com> Date: Thu, 02 May 2002 18:28:50 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: "Defryn, Guy" Cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: mysql install problem References: <98B01D2717B9D411B38F0008C7840931057F37EE@its-xchg2.massey.ac.nz> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Defryn, Guy wrote: > I have been trying to install mysql on my freebsd box and it does not seem to work. I cannot use the ports on this box > > I have followed everything step by step as described in three books/manuals > > > > -I downloaded mysql-3.23.49-unknown-freebsdelf4.4-i386.tar.gz from the mysqlsite and copy it to /tmp directory > > -I ran tar tzvf mysql-3.23.49-unknown-freebsdelf4.4-i386.tar.gz and a directory with the same name gets created > > -According to my manuals the following steps are to run ./ configure -prefix=/usr/local/mysql and than the commands make and make install. > > > > The configure scripts run but a /usr/local/mysql does not get created and it won't let me run make and make install. Gonna need some error messages in order to give any kind of reasonable help. Before that, however, do the instructions say that you need gmake? If so, install gmake first, then use gmake instead of make. > Does any know how can get it to go? Also how can I delete non-empty directories? Why not just use /stand/sysinstall to install a precompiled package? Much easier. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 15:25:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kpax.icsmx.com (kpax.icsmx.com [200.33.246.13]) by hub.freebsd.org (Postfix) with ESMTP id 1B15D37B47B for ; Thu, 2 May 2002 15:25:05 -0700 (PDT) Received: from piii.intranet.com.mx ([200.33.246.4]) by kpax.icsmx.com (8.11.6/8.11.6) with ESMTP id g42MMaV19275; Thu, 2 May 2002 17:22:37 -0500 (CDT) (envelope-from jbiquez@icsmx.com) Message-Id: <5.1.0.14.2.20020502172125.01f4bca0@icsmx.com> X-Sender: jbiquez@icsmx.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Thu, 02 May 2002 17:23:04 -0500 To: Dan Nelson From: Jorge Biquez Subject: Re: FTP on 4.4.STABLE with problems? Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <20020502221445.GG70810@dan.emsphone.com> References: <5.1.0.14.2.20020502160148.03248c50@icsmx.com> <5.1.0.14.2.20020502160148.03248c50@icsmx.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks a lot! With this they will know the HIGHEST risk they have on their server is not that ..... Jorge Biquez At 17:14 02/05/02 -0500, you wrote: >In the last episode (May 02), Jorge Biquez said: > > On the company I'm working a client asked for a server for their > > simple and plain web pages. They asked for an FTP account and Apache > > configured. They have been working without problems. Since last month > > a new area of the IT department is "auditing" the server remotely and > > are asking for fixing the things they found wrong (or they believe it > > is wrong). According to them the FTP that is running by default on > > the 4.4.-STABLE version has problems. "Their automated report says > > it". I'm including the message they sent me at the end of this email. > > Any similar experiences on this? What have you done with clients like > > this that think that "the server they ordered to configure is wrong > > configured"?. > >Tell them to read the nessus report: > > > -------This is what they sent me as result of their auditing----- > > FTPD glob Heap Corruption ftp (21/tcp) You seem to be running an FTP > > server which is vulnerable to the 'glob heap corruption' flaw. An > > attacker may use this problem to execute arbitrary commands on this > > host. > > > > *** As Nessus solely relied on the banner of the server to issue this > > *** warning, so this alert might be a false positive > >With the 'only safe tests' flag turned on, nessus doesn't actually test >for bugs; it just checks banner strings and version numbers. FreeBSD's >FTP client has always reported > >220 hostname FTP server (Version 6.00LS) ready. > >and nessus checks that and says "possibly buggy". This bug was fixed >in FreeBSD's stock ftpd prior to the release of FreeBSD 4.3. >ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-01:33.ftpd-glob.v1.1.asc > >-- > Dan Nelson > dnelson@allantgroup.com > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16: 3:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by hub.freebsd.org (Postfix) with SMTP id 39F5D37B417 for ; Thu, 2 May 2002 16:03:42 -0700 (PDT) Received: (qmail 14572 invoked by uid 0); 2 May 2002 23:03:40 -0000 Received: from pd9eb6ad2.dip.t-dialin.net (HELO snorry.myip.org) (217.235.106.210) by mail.gmx.net (mp015-rz3) with SMTP; 2 May 2002 23:03:40 -0000 Content-Type: text/plain; charset="us-ascii" From: Thomas Wuerfl To: freebsd-questions@freebsd.org Subject: bug in burncd? Date: Fri, 3 May 2002 01:04:00 +0200 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200205030104.00788.thomaswuerfl@gmx.de> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, when I burn a audio-cd in dao mode, I always have a small offset between = the=20 beginning of the song and the time display. Any explanation? Regards, Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16:11: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mirapoint2.brutele.be (mirapoint2.brutele.be [212.68.193.7]) by hub.freebsd.org (Postfix) with ESMTP id 3D2FE37B405; Thu, 2 May 2002 16:10:52 -0700 (PDT) Received: from gateway.lefort.net ([213.189.162.78]) by mirapoint2.brutele.be (Mirapoint) with SMTP id AXJ41069; Fri, 3 May 2002 01:10:49 +0200 (CEST) Received: from jsite.lefort.net (jsite.lefort.net [192.168.1.2]) by gateway.lefort.net (Postfix) with ESMTP id 27E1815259; Fri, 3 May 2002 01:10:45 +0200 (CEST) Received: by jsite.lefort.net (Postfix, from userid 1000) id D749822EEB; Fri, 3 May 2002 01:10:44 +0200 (CEST) Date: Fri, 3 May 2002 01:10:44 +0200 From: Jean-Yves Lefort To: freebsd-stable@FreeBSD.org Cc: freebsd-questions@FreeBSD.org Subject: make buildworld fails Message-ID: <20020503011044.A77919@jsite.lefort.net> Mail-Followup-To: freebsd-stable@FreeBSD.org, freebsd-questions@FreeBSD.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I am running 4.5-STABLE, I never had any problem compiling the world; however, my last successfull buildworld is dated: $ uname -a FreeBSD jsite.lefort.net 4.5-STABLE FreeBSD 4.5-STABLE #0: Tue Apr 23 07:38:11 CEST 2002 jylefort@jsite.lefort.net:/usr/obj/usr/src/sys/JSITE i386 Since that date, make buildworld invariably fails on the same error: cc -O -pipe -DINFODIR=\"/usr/share/info:/usr/local/info:/usr/X11R6/info:.\" -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo -I/usr/src/gnu/usr.bin/texinfo/info/../../../../contrib/texinfo/lib -static -o info dir.o display.o doc.o dribble.o echo-area.o filesys.o footnotes.o gc.o indices.o info-utils.o info.o infodoc.o infomap.o m-x.o man.o nodemenu.o nodes.o search.o session.o signals.o terminal.o tilde.o variables.o window.o -ltermcap /usr/obj/usr/src/i386/usr/src/gnu/usr.bin/texinfo/info/../libtxi/libtxi.a /usr/lib/libtermcap.a(lib_tgoto.o): In function `tgoto': lib_tgoto.o(.text+0x33b): undefined reference to `tparm' /usr/lib/libtermcap.a(lib_tputs.o): In function `delay_output': lib_tputs.o(.text+0x22): undefined reference to `napms' /usr/lib/libtermcap.a(comp_scan.o): In function `_nc_get_token': comp_scan.o(.text+0x142): undefined reference to `unctrl' comp_scan.o(.text+0x48e): undefined reference to `unctrl' comp_scan.o(.text+0x5cd): undefined reference to `unctrl' /usr/lib/libtermcap.a(comp_scan.o): In function `_nc_trans_string': comp_scan.o(.text+0x682): undefined reference to `unctrl' comp_scan.o(.text+0x81c): undefined reference to `unctrl' /usr/lib/libtermcap.a(captoinfo.o)(.text+0xaa0): more undefined references to `unctrl' follow /usr/lib/libtermcap.a(tty_update.o)(.text+0x747): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o)(.text+0x85a): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o): In function `doupdate': tty_update.o(.text+0xdf3): undefined reference to `_nc_signal_handler' tty_update.o(.text+0x10ca): undefined reference to `_nc_signal_handler' tty_update.o(.text+0x2928): undefined reference to `tparm' tty_update.o(.text+0x2c84): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o): In function `_nc_outstr': tty_update.o(.text+0x2fea): undefined reference to `tparm' tty_update.o(.text+0x36ab): undefined reference to `tparm' tty_update.o(.text+0x3b6f): undefined reference to `tparm' /usr/lib/libtermcap.a(tty_update.o)(.text+0x3c87): more undefined references to `tparm' follow /usr/lib/libtermcap.a(lib_window.o): In function `wcursyncup': lib_window.o(.text+0x326): undefined reference to `wmove' /usr/lib/libtermcap.a(lib_ttyflags.o): In function `reset_prog_mode': lib_ttyflags.o(.text+0x145): undefined reference to `_nc_set_buffer' /usr/lib/libtermcap.a(lib_ttyflags.o): In function `reset_shell_mode': lib_ttyflags.o(.text+0x196): undefined reference to `_nc_set_buffer' /usr/lib/libtermcap.a(init_keytry.o): In function `_nc_init_keytry': init_keytry.o(.text+0x50): undefined reference to `_nc_add_to_try' /usr/lib/libtermcap.a(lib_addch.o): In function `_nc_waddch_nosync': lib_addch.o(.text+0x7d): undefined reference to `unctrl' lib_addch.o(.text+0x2ed): undefined reference to `wclrtoeol' lib_addch.o(.text+0x335): undefined reference to `wclrtoeol' /usr/lib/libtermcap.a(lib_addch.o): In function `waddch': lib_addch.o(.text+0x4dc): undefined reference to `unctrl' lib_addch.o(.text+0x74d): undefined reference to `wclrtoeol' lib_addch.o(.text+0x7a5): undefined reference to `wclrtoeol' /usr/lib/libtermcap.a(lib_addch.o): In function `wechochar': lib_addch.o(.text+0x968): undefined reference to `unctrl' lib_addch.o(.text+0xbd9): undefined reference to `wclrtoeol' lib_addch.o(.text+0xc31): undefined reference to `wclrtoeol' *** Error code 1 Stop in /usr/src/gnu/usr.bin/texinfo/info. *** Error code 1 Stop in /usr/src/gnu/usr.bin/texinfo. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. I CVSupped multiple times since then; i even rm'ed /usr/src and CVSupped it again from scratch, thinking of a CVS merge problem; the error is still here. Any clue? Best regards, Jean-Yves Lefort -- * Jean-Yves Lefort -- jylefort@brutele.be -- http://lefort.homeunix.org/ * To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16:17:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from utility.clubscholarship.com (utility.clubscholarship.com [198.78.70.175]) by hub.freebsd.org (Postfix) with ESMTP id 9771C37B400 for ; Thu, 2 May 2002 16:17:42 -0700 (PDT) Received: from localhost (root@localhost) by utility.clubscholarship.com (8.11.6/8.11.6) with ESMTP id g42NF5c69543 for ; Thu, 2 May 2002 16:15:05 -0700 (PDT) (envelope-from root@utility.clubscholarship.com) Date: Thu, 2 May 2002 16:15:05 -0700 (PDT) From: Patrick Thomas To: Subject: confusing CPU stats in `top` Message-ID: <20020502160811.P29785-100000@utility.clubscholarship.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG background: normally, when I run `top` in a multu processor system, the CPU percentage summary tells me the percentage being used of the entire 4 processor range. So, if for instance the system is lightly loaded (99.9% idle) and suddenly some process takes up a ton of cycles, I will see this in `top`: 92731 88 2 0 42280K 18464K poll 1 238:30 99.95% 99.95% mysqld BUT - in the summary at the top of `top`, I will see roughly 74.9% idle - since only one of the four CPUs is being eaten up. THis makes sense, and it what I have learned to look for in 4-proc systems. ---- So what is happening here ? last pid: 24283; load averages: 1.71, 2.07, 2.62 up 97+17:51:18 16:09:59 964 processes: 4 running, 956 sleeping, 4 zombie CPU states: 11.1% user, 0.2% nice, 19.0% system, 0.0% interrupt, 69.7% idle Mem: 1289M Active, 234M Inact, 376M Wired, 82M Cache, 199M Buf, 28M Free Swap: 2018M Total, 6316K Used, 2012M Free PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU CPU COMMAND 92645 88 2 0 42280K 18464K poll 1 238:30 38.82% 38.82% mysqld 56036 root 2 0 1836K 1316K select 1 21:58 6.84% 6.84% master 8398 88 2 0 39272K 20700K poll 0 996:14 5.47% 5.47% mysqld 23617 root 31 0 2968K 2108K CPU1 2 0:01 5.31% 2.54% top 19435 1006 2 20 48916K 39828K poll 0 35:20 1.12% 1.12% httpd 93802 500 2 0 64804K 61024K sbwait 1 2:40 0.63% 0.63% httpd 87873 root 2 0 1596K 1180K select 2 0:01 0.20% 0.20% proftpd 93750 500 2 0 70352K 66716K accept 1 3:24 0.15% 0.15% httpd 93751 500 2 0 66396K 62412K accept 0 3:02 0.15% 0.15% httpd 4965 500 2 0 49084K 45436K sbwait 2 0:02 0.10% 0.10% httpd 53925 user 38 5 10652K 4960K CPU2 0 7:40 0.05% 0.05% ack 747 root 2 0 872K 284K poll 2 159:24 0.00% 0.00% httpd 68955 root 2 0 872K 368K poll 1 148:05 0.00% 0.00% httpd 96533 72 2 0 13360K 12624K poll 0 29:00 0.00% 0.00% ircd As you can see, the server reports 69.7% idle BUT, that would imply processes using up a total of (30.3 x 4) `top` reported percent ... which is not the case - if you add up the percentages in the `top` reported processes, they add up to ~58 or so, and if we divide that by four we would expect to see 85% idle or so, instead of 69.7% idle. So why is this exhibiting this behavior, when as I said, if you have a non-loaded system, and a single process goes to 99%, the overall load is roughly 74% ?? thanks, PT To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16:26:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from surreal.nl (surreal.nl [212.204.236.10]) by hub.freebsd.org (Postfix) with ESMTP id 6AE2237B404 for ; Thu, 2 May 2002 16:26:16 -0700 (PDT) Received: from vscan (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 3F2DA445; Fri, 3 May 2002 01:26:16 +0200 (CEST) Received: by surreal.nl (Postfix, from userid 1000) id 7983743F; Fri, 3 May 2002 01:26:15 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by surreal.nl (Postfix) with ESMTP id 769483BA; Fri, 3 May 2002 01:26:15 +0200 (CEST) Date: Fri, 3 May 2002 01:26:15 +0200 (CEST) From: Walter Hop To: Patrick Thomas Cc: freebsd-questions@freebsd.org Subject: Re: confusing CPU stats in `top` In-Reply-To: <20020502160811.P29785-100000@utility.clubscholarship.com> Message-ID: <20020503011942.N67241-100000@surreal.nl> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by surreal.binity.net (amavis-perl-11-sky2) for freebsd-questions@freebsd.org root@utility.clubscholarship.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [in reply to Patrick Thomas , 02/05/02] > As you can see, the server reports 69.7% idle > > BUT, that would imply processes using up a total of (30.3 x 4) `top` > reported percent ... which is not the case - if you add up the > percentages in the `top` reported processes, they add up to ~58 or so, > and if we divide that by four we would expect to see 85% idle or so, > instead of 69.7% idle. The FreeBSD 4.x kernel has an inefficiency in SMP systems: while one processor is running in the kernel, the other processors cannot due to resource locking, so they have to wait. This causes the system to be less idle than an ideal system. (FreeBSD 5 is expected to solve a lot of these issues, but also with that kernel you will see that you can't just multiply CPU power by the number of processors, there's always some overhead involved.) Also the numbers in "top" are just rough measures.. -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16:55:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rambo.simx.org (rambo.simx.org [194.17.208.54]) by hub.freebsd.org (Postfix) with ESMTP id 8040937B419 for ; Thu, 2 May 2002 16:55:18 -0700 (PDT) Received: from rambo.simx.org (rocky [192.168.0.2]) by rambo.simx.org (8.12.3/8.12.3) with ESMTP id g42Nt9a6057965 for ; Fri, 3 May 2002 01:55:10 +0200 (CEST) (envelope-from listsub@rambo.simx.org) Message-ID: <3CD1D1F9.2040905@rambo.simx.org> Date: Fri, 03 May 2002 01:55:37 +0200 From: "Roger 'Rocky' Vetterberg" User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: getting amount of ram with sysctl Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi people, Im trying to get the total amount of ram in a machine using sysctl variables. I figured vm.stats.vm.v_page_size * vm.stats.vm.v_page_count should give me total ram, but it always end up a few megs short. For example, on a machine with 256M ram I get a total of 249M when I do the math with above mentioned sysctl values. I know ram is not always exactly what it says on the package, it can differ a few megs in any direction, but I feel like the numbers Im seeing when testing this on different machines are always atleast ~5-6M short of what it should be. I was thinking things like BIOS shadowing could steal a little ram, but I have tried turning everything like that off, and still it doesnt add up. Is sysctl showing the actual amount of ram in the machine, or is it showing the amount of ram available to the os? Am I missing something obvious? Anyone care to point out what I do wrong, or explain why there are always some ram not showing? -- R To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 16:58:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cmailg7.svr.pol.co.uk (cmailg7.svr.pol.co.uk [195.92.195.177]) by hub.freebsd.org (Postfix) with ESMTP id 03EF437B404 for ; Thu, 2 May 2002 16:58:42 -0700 (PDT) Received: from [195.92.67.23] (helo=mail18.svr.pol.co.uk) by cmailg7.svr.pol.co.uk with esmtp (Exim 3.35 #1) id 173QT5-000139-00; Fri, 03 May 2002 00:58:35 +0100 Received: from modem-3437.bonobo.dialup.pol.co.uk ([217.134.61.109] helo=lineone.net) by mail18.svr.pol.co.uk with esmtp (Exim 3.35 #1) id 173QT4-0006im-00; Fri, 03 May 2002 00:58:34 +0100 Message-ID: <3CD1D29F.FCEDB40F@lineone.net> Date: Fri, 03 May 2002 00:58:23 +0100 From: Jean-Mark Dupoux X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: mpd , questions@freebsd.org Subject: Re: Mac&Tosh References: <3CD1A85C.CCAEC2E8@lineone.net> <20020502175219.A32601@rochester.rr.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG mpd wrote: > > Please don't top-post. > > On Thu, May 02, 2002 at 09:58:04PM +0100, Jean-Mark Dupoux wrote: > > Hello Aedan > > > > You cant run any kind of BSD on a Mac, unless you have some kind of PC > > emulation software (VMware, Virtual PC etc) but that would be extremely > > resource hungry and defeat the whole purpose probably > > Wrong. NetBSD will certainly run on this hardware. OpenBSD might, as well. > FreeBSD will not. From what I understood, "official" support on Apple's part for OSx was restricted to "real" G3 machines so it looks like openbsd might still have problems but Netbsd fully suported. Wouldnt know about the video card though. > > > > > Didnt realize Athlon was really part of the K6 family, but all AMD > > chips are good. Try the mobile mailing list for specifics on your > > model laptop though > > > > > > mark > > jmdupoux_@_lineone.net > > > > > > > I have a mac 8500, newer366 g3 card/xlr8 drivers/voodoo5 card-freebsd, > > > netbsd or openbsd? > > See above. > > > > Also a Toshiba 2540 CDS,athlon K6,is this a viable bsd box > > > Plan would be to use toshiba as router > > This should work fine with any of the BSDs, include FreeBSD. > > mike > -- > ___________________________________________________________ > > "YOU CAN NOT BUY AN EIGHT FOOT TALL CRIME FIGHTING > ROBOT UNLESS YOU ARE A LAW ENFORCEMENT OFFICER!!!" > - Pokey the Penguin from "REQUEST DENIED THEN GRANTED" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:18:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from imo-d08.mx.aol.com (imo-d08.mx.aol.com [205.188.157.40]) by hub.freebsd.org (Postfix) with ESMTP id C12FB37B419 for ; Thu, 2 May 2002 17:18:47 -0700 (PDT) Received: from Ibedalion@aol.com by imo-d08.mx.aol.com (mail_out_v32.5.) id n.17c.7c8a528 (4331) for ; Thu, 2 May 2002 20:18:42 -0400 (EDT) From: Ibedalion@aol.com Message-ID: <17c.7c8a528.2a033161@aol.com> Date: Thu, 2 May 2002 20:18:41 EDT Subject: what file do i need To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_17c.7c8a528.2a033161_boundary" X-Mailer: AOL 7.0 for Windows US sub 10504 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --part1_17c.7c8a528.2a033161_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit WHAT FILE DO I NEED TO DOWNLOAD FROM A FTP SITE THAT HAS THE FREE BSD OPERATING SYSTEM IN IT SO I CAN INSTALL IT ON MY COMPUTER I HAVE A PII 300 96MB MEM HDD 4GB HDD WITH A INTELL MODEM AND TRIDENT VIDEO CARD --part1_17c.7c8a528.2a033161_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit WHAT FILE DO I NEED TO DOWNLOAD FROM A FTP SITE THAT HAS THE FREE BSD OPERATING SYSTEM IN IT SO I CAN INSTALL IT ON MY COMPUTER I HAVE A PII 300 96MB MEM HDD 4GB HDD WITH A INTELL MODEM AND TRIDENT VIDEO CARD --part1_17c.7c8a528.2a033161_boundary-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:21:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.tricom.com.ph (phoenix.tricom.com.ph [203.167.87.58]) by hub.freebsd.org (Postfix) with SMTP id 1745237B405 for ; Thu, 2 May 2002 17:21:15 -0700 (PDT) Received: (qmail 84034 invoked from network); 3 May 2002 00:20:51 -0000 Received: from unknown (HELO orion.tricom.com.ph) (203.167.87.59) by phoenix.tricom.com.ph with SMTP; 3 May 2002 00:20:51 -0000 Date: Fri, 3 May 2002 08:24:33 +0800 From: Jimmy To: Walid Nehme Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ipfw and ipfilter Message-Id: <20020503082433.22b52703.jimmy@tricom.com.ph> In-Reply-To: <20020502182226.48214.qmail@web10007.mail.yahoo.com> References: <20020502182226.48214.qmail@web10007.mail.yahoo.com> Organization: Tricom X-Mailer: Sylpheed version 0.7.5 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002 11:22:26 -0700 (PDT) Walid Nehme wrote: > what is better, ipfw or ipfilter, and which is newer? > which is faster to nat with? > http://home.earthlink.net/~jaymzh666/ipf/IPFfreebsd.html#13 > ===== > Regards. > Walid Nehme > ICQ:5855336 > MSN:nastylid@hotmail.com > my homepage http://gayana.kharkov.com/Start.html > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message actually you can use them both on the same FreeBSD box. Jimmy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:23:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-f143.hotmail.com [216.32.181.143]) by hub.freebsd.org (Postfix) with ESMTP id 766B837B404; Thu, 2 May 2002 17:23:23 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 2 May 2002 17:23:23 -0700 Received: from 63.228.184.144 by lw2fd.hotmail.msn.com with HTTP; Fri, 03 May 2002 00:23:23 GMT X-Originating-IP: [63.228.184.144] From: "Korey Pelton" Subject: I cannot access some websites Date: Thu, 02 May 2002 18:23:23 -0600 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 03 May 2002 00:23:23.0399 (UTC) FILETIME=[BC47B170:01C1F238] To: undisclosed-recipients:; Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I apologize for cross-posting this, but I haven't recieved a reply from -questions yet, and I need to get this fixed for my job or I will have to switch to Windows. I was running 4.4-release for a long time, and I could access any website on the internet. Then, I decided to upgrade to 4.5-release and now I cannot access certain websites, some of which include www.apache.org and www.bn.com. However, I can access other websites such as www.yahoo.com, www.freebsd.org, and www.altavista.com. I have tried to find a pattern in the IP addresses, and there is no pattern. What seems so strange is that I can successfully ping ANY website on the internet from my machine. When pointing the Lynx browser to http://www.apache.org, it says "Looking up www.apache.org" for about 1/2 second and then it says "Making http connection" for about 2 minutes and then it says "cannot connect!" and then it stops. And, yes, I can successfully ping apache.org. I also tried using Opera and had the same results as with Lynx. I have read the ppp chapter in the handbook about 8 or 9 times just trying to find a clue to whatever I am doing wrong. Last night, I did a cvsup and then a buildworld, buildkernel, installkernel, and installworld, and I still get the same results. However, today, I believe I can access a few websites that I couldn't access yesterday, but then again, that could be my mind playing tricks on me. I still cannot access a lot of websites. I am using the same ISP that I used before and that I use in windows, and I only have this problem with this upgraded machine. Anyway, I am willing to send anyone my kernel config file, ppp.conf, or any other file that might be helpful in solving this problem. Thank you all and I look forward to any reply. Korey Pelton _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:27:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fastmail.fm (fastmail.fm [209.61.183.86]) by hub.freebsd.org (Postfix) with ESMTP id 3A7CE37B41A for ; Thu, 2 May 2002 17:27:39 -0700 (PDT) Received: from fastmail.fm (localhost [127.0.0.1]) by localhost.localdomain (Postfix) with ESMTP id 71E726DA16; Thu, 2 May 2002 19:27:31 -0500 (CDT) Received: by fastmail.fm (Postfix, from userid 99) id 02AF56DA03; Thu, 2 May 2002 19:27:30 -0500 (CDT) Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 2.117 (F2.6; T0.14; A1.42; B2.12; Q2.03) Date: Fri, 3 May 2002 00:27:30 +0000 From: "Richard Shea" To: "FreeBSD Questions" Reply-To: "Richard Shea" X-Epoch: 1020385651 X-Sasl-enc: fdRaKqyGGEmjIGYAqTdGew Cc: listsub@rambo.simx.org Subject: getting amount of ram with sysctl Message-Id: <20020503002730.02AF56DA03@fastmail.fm> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Im trying to get the total amount of ram in a machine using > sysctl variables. > > I figured vm.stats.vm.v_page_size * vm.stats.vm.v_page_count > should give me total ram, but it always end up a few megs short. Hi - Sorry I don't have an answer to your question but I would like to do this myself and I don't know how (I don't know how to do it at all, forget about accuracy !). I've looked at 'man sysctl' and I can't see the variables you have mentioned - the nearest i've got is 'vm.loadavg'. Could you post the actual command you're using so that I could try it ? Sorry about not answering your question, I'm sure someone will ! regards richard shea. -- http://fastmail.fm - Get back to work To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:36:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 16CD937B41B for ; Thu, 2 May 2002 17:36:09 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #2) id 173R3Q-0006RN-00; Thu, 02 May 2002 17:36:08 -0700 Received: from motil (moti [192.168.0.110]) by ns.flncs.com (Postfix) with SMTP id 577AA557E; Thu, 2 May 2002 20:39:33 -0400 (EDT) Message-ID: <003e01c1f23a$9a88dc10$6e00a8c0@motil> From: "Moti" To: "Loren Koss" , References: Subject: Re: poptop problem.. Date: Thu, 2 May 2002 20:36:45 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG this is a freebsd list so i'll presume you're using freebsd . if i'm correct than take poptop and through out the windows ... use mpd netgraph as a pptp server . here's the link you need : http://www.itga.com.au/~gnb/vpn/pptp-serv.html it's simple robust and works like a charmmmmmmmmmm moti ----- Original Message ----- From: "Loren Koss" To: Sent: Thursday, May 02, 2002 5:38 PM Subject: poptop problem.. > I know there is a mailing list for poptop but it doesn't look like anyone > responds.. I don't want to waste bandwidth on this list unnecessarily, so > if anyone has any experience with this app, could you please email me as I > am having some difficulty with it and really want to get it working. > > Thanks > Loren > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:37:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fastmail.fm (fastmail.fm [209.61.183.86]) by hub.freebsd.org (Postfix) with ESMTP id 89ED337B41C for ; Thu, 2 May 2002 17:37:13 -0700 (PDT) Received: from fastmail.fm (localhost [127.0.0.1]) by localhost.localdomain (Postfix) with ESMTP id C420B6DA45; Thu, 2 May 2002 19:37:05 -0500 (CDT) Received: by fastmail.fm (Postfix, from userid 99) id B4BFF6D9BC; Thu, 2 May 2002 19:37:05 -0500 (CDT) Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 2.117 (F2.6; T0.14; A1.42; B2.12; Q2.03) Date: Fri, 3 May 2002 00:37:05 +0000 From: "Richard Shea" To: peltkore@hotmail.com Reply-To: "Richard Shea" X-Epoch: 1020386225 X-Sasl-enc: U4GJLl5LZ2DhEgRp4Ufm+w Cc: "FreeBSD Questions" Subject: I cannot access some websites Message-Id: <20020503003705.B4BFF6D9BC@fastmail.fm> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Just a thought but have you tried using IP addresses from within the browser. I can't think why it would make any difference but it might narrow down the issue a little. I can get bn.com on http://208.237.178.21 regards richard shea. -- http://fastmail.fm - the way e-mail *should* be To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 17:54: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blues.jpj.net (blues.jpj.net [204.97.17.6]) by hub.freebsd.org (Postfix) with ESMTP id 420C937B404 for ; Thu, 2 May 2002 17:54:02 -0700 (PDT) Received: from localhost (benh@localhost) by blues.jpj.net (8.11.6/8.11.6) with ESMTP id g430rq423000 for ; Thu, 2 May 2002 20:53:52 -0400 (EDT) Date: Thu, 2 May 2002 20:53:51 -0400 (EDT) From: Ben Hockenhull To: freebsd-questions@freebsd.org Subject: Problems compiling MIMEDefang (gcc and -lsm) Message-ID: <20020502204941.X22838-100000@blues.jpj.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm trying to compile MIMEDefang under FreeBSD 4.5-STABLE and am having a problem with what appears to be a library. byron benh 17 /usr/src/source/mimedefang-2.8# make gcc -g -O2 -pthread -DPERL_PATH=\"/usr/bin/perl\" -DMIMEDEFANG_PL=\"/usr/local/bin/mimedefang.pl\" -DRM=\"/bin/rm\" -DVERSION=\"2.8\" -DSPOOLDIR=\"/var/spool/MIMEDefang\" -DQDIR=\"/var/spool/MIMEDefang\" -I/usr/include -c -o mimedefang.o mimedefang.c gcc -g -O2 -pthread -o mimedefang mimedefang.o /usr/lib/libmilter.a /usr/local/lib/libsmutil.a -lsm /usr/libexec/elf/ld: cannot find -lsm *** Error code 1 Stop in /usr/src/source/mimedefang/mimedefang-2.8. byron benh 18 /usr/src/source/mimedefang-2.8# One suggestion I saw was to copy /usr/obj/usr/src/lib/libsm/libsm.a to /usr/local/lib, which I did, but the problem persists. Any suggestions? Thanks Ben To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18: 5:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.mail.pas.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 8DA1D37B400 for ; Thu, 2 May 2002 18:05:42 -0700 (PDT) Received: from dialup-65.59.67.105.dial1.philadelphia1.level3.net ([65.59.67.105] helo=sparky) by snipe.prod.itd.earthlink.net with smtp (Exim 3.33 #2) id 173RVg-0003al-00; Thu, 02 May 2002 18:05:21 -0700 From: Jud To: Shantanu , RichardH , "freebsd-questions@freebsd.org" , Bryan Curl Date: Thu, 02 May 2002 21:04:36 -0400 X-Priority: 3 (Normal) In-Reply-To: <20020502211847.21064.qmail@web20513.mail.yahoo.com> Message-Id: <3V97KG4ZFDDOMMJPKYS0597MIYUWVGD.3cd1e224@sparky> Subject: Re: Re: Boot Manager Conversion MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" X-Mailer: Opera 6.02 build 1095 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG 5/2/2002 5:18:47 PM, Bryan Curl wrote: [snip] >At any rate, shouldn't I run fdisk and make my FreeBSD drive non- bootable? >Can't have two boot drives in one system... windoze wouldn't like that after all. Howdy. Please post in plain text rather than HTML (and below rather than above the text you're responding to) if you can help it. I'm not intimately familiar with XOSL, but the bootloader should allow you to configure the active partition. You should be also be able to configure the bootloader to determine which drive is seen as "first." Your system BIOS may allow you to switch which drive is seen as "first" as well. So you don't have to run fdisk beforehand unless it's necessary to boot into Windows to install whichever bootloader you decide to use. Jud To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:12:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tiirismaaktt.fi (adsl-62-44-198-2.phnet.fi [62.44.198.2]) by hub.freebsd.org (Postfix) with ESMTP id 87A0337B41E for ; Thu, 2 May 2002 18:12:20 -0700 (PDT) Received: by bwtiiris.tiirismaaktt.fi id <117623>; Fri, 3 May 2002 03:54:06 +0300 From: To: freebsd-questions@freebsd.org Subject: LET NITELITE GOLF INCREASE YOUR INCOME TODAY! Date: Fri, 3 May 2002 07:51:55 Message-Id: <02May3.035406eest.117623@bwtiiris.tiirismaaktt.fi> Reply-To: golf__jobs@yahoo.com Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG HAVE FUN MAKING MONEY BY SELLING NITELITE GOLF TOURNAMENTS........ This is a REAL full or part-time job opportunity, not an Internet sales pitch. We are looking for NITELITE GOLF distributors. To date there have been over 175,000 tournaments held around the world. Now you have the chance to make money at the Golf Courses in your area. NITELITE GOLF Tournaments are great for Charity Fundraisers. Possible target markets include: CHURCHES, FIRE DEPTS, POLICE DEPTS, SCHOOLS, COLLEGES, HOSPITALS, MEDICAL GROUPS....(cancer, heart, ms, md, march of dimes, etc.) MILITARY ORGANS, ARMY, NAVY, AIRFORCE, MARINES, COAST GUARD, POLITICIANS, CIVIC GROUPS....LIONS, ROTARY, KIWANIS, ELKS, MASONS, JAYCEES, FUND RAISING COUNSELORS AND ORGANS, VETERANS ORGANS VFW., YOUTH ORGANS.....BOY SCOUTS, YMCA, YWCA, SPORTS TEAMS, HIGH SCHOOL BANDS. If you are interested please contact golf_life@hotmail.com. Include your mailing address and we will send you a free NITELIGHT Golf Ball. We have your email address marked as someone interested in receiving golf-related messages. If you would like to be taken off our list please reply with remove in the subject. NITELITE GOLF "THE SECOND MOST FUN YOU CAN HAVE IN THE DARK!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:17:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rambo.simx.org (rambo.simx.org [194.17.208.54]) by hub.freebsd.org (Postfix) with ESMTP id CFEC837B419 for ; Thu, 2 May 2002 18:17:14 -0700 (PDT) Received: from rambo.simx.org (rocky [192.168.0.2]) by rambo.simx.org (8.12.3/8.12.3) with ESMTP id g431H9a6059243; Fri, 3 May 2002 03:17:09 +0200 (CEST) (envelope-from listsub@rambo.simx.org) Message-ID: <3CD1E531.8050808@rambo.simx.org> Date: Fri, 03 May 2002 03:17:37 +0200 From: "Roger 'Rocky' Vetterberg" User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us MIME-Version: 1.0 To: Richard Shea Cc: FreeBSD Questions Subject: Re: getting amount of ram with sysctl References: <20020503002730.02AF56DA03@fastmail.fm> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Richard Shea wrote: > Hi - Sorry I don't have an answer to your question but I would like to > do this myself and I don't know how (I don't know how to do it at all, > forget about accuracy !). > > I've looked at 'man sysctl' and I can't see the variables you have > mentioned - the nearest i've got is 'vm.loadavg'. > > Could you post the actual command you're using so that I could try it ? > > Sorry about not answering your question, I'm sure someone will ! > > regards > > richard shea. The commands are just 'sysctl vm.stats.vm.v_page_size' and 'sysctl vm.stats.vm.v_page_count'. Someone just told me about 'sysctl hw.physmem' which gives me a slightly more accurate value, but Im still missing a few megs. -- R To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:27:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unix.pciway.com (w050.z065104054.lax-ca.dsl.cnc.net [65.104.54.50]) by hub.freebsd.org (Postfix) with ESMTP id 5AF6437B405 for ; Thu, 2 May 2002 18:27:24 -0700 (PDT) Received: from unix.pciway.com (localhost.pciway.com [127.0.0.1]) by unix.pciway.com (8.12.2/8.11.1) with ESMTP id g431RMuo063804; Thu, 2 May 2002 18:27:22 -0700 (PDT) (envelope-from loren@pciway.com) Received: from localhost (loren@localhost) by unix.pciway.com (8.12.2/8.12.2/Submit) with ESMTP id g431RLDa063801; Thu, 2 May 2002 18:27:21 -0700 (PDT) X-Authentication-Warning: unix.pciway.com: loren owned process doing -bs Date: Thu, 2 May 2002 18:27:21 -0700 (PDT) From: Loren Koss To: Moti Cc: freebsd-questions@freebsd.org Subject: Re: poptop problem.. In-Reply-To: <003e01c1f23a$9a88dc10$6e00a8c0@motil> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yeah, I'm using FreeBSD.. Okay, i've installed mpd-netgraph, but I get this when I start it: Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 63798, version 3.3 (root@unix.pciway.com 18:16 2-May-2002) [pptp] ppp node is "mpd63798-pptp" [pptp] can't connect iface and inet: File exists [pptp] netgraph initialization failed mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined mpd: no bundles defined Here is my mpd.conf file: default: load pptp pptp: new -i ng0 pptp pptp set iface disable on-demand #set iface enable proxy-arp set bundle disable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 60 180 set ipcp yes vjcomp set ipcp ranges 10.10.50.201/32 10.10.50.210/32 set ipcp dns 10.10.50.1 set ipcp nbns 10.10.50.1 set bundle enable compression set ccp yes mppc #set ccp yes mpp-e40 set ccp no mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless set bundle yes crypt-reqd and mpd.links: pptp0: set link type pptp set pptp self 10.10.50.200 set pptp enable incoming set pptp disable originate What else do I have to do?? The instructions are not as concrete as it would seem.. Thanks for your help! Loren On Thu, 2 May 2002, Moti wrote: > this is a freebsd list so i'll presume you're using freebsd . > if i'm correct than take poptop and through out the windows ... > use mpd netgraph as a pptp server . > here's the link you need : > http://www.itga.com.au/~gnb/vpn/pptp-serv.html > it's simple robust and works like a charmmmmmmmmmm > moti > ----- Original Message ----- > From: "Loren Koss" > To: > Sent: Thursday, May 02, 2002 5:38 PM > Subject: poptop problem.. > > > > I know there is a mailing list for poptop but it doesn't look like anyone > > responds.. I don't want to waste bandwidth on this list unnecessarily, so > > if anyone has any experience with this app, could you please email me as I > > am having some difficulty with it and really want to get it working. > > > > Thanks > > Loren > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:29:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from d1-hrz.uni-duisburg.de (d1-hrz.uni-duisburg.de [134.91.4.38]) by hub.freebsd.org (Postfix) with ESMTP id 1238D37B400 for ; Thu, 2 May 2002 18:29:34 -0700 (PDT) Received: from pandora.plagegeister.de (athome98.uni-duisburg.de [134.91.17.108]) by d1-hrz.uni-duisburg.de (8.11.1/8.11.1) with SMTP id g431TUY03293 for ; Fri, 3 May 2002 03:29:31 +0200 (MESZ) Received: (nullmailer pid 50090 invoked by uid 1001); Fri, 03 May 2002 01:34:55 -0000 Date: Fri, 3 May 2002 03:34:54 +0200 From: Mark Weinem To: "freebsd-questions@freebsd.org" Subject: Re: Frustation with FreeBSD Message-ID: <20020503013454.GD7260@pandora.plagegeister.de> Mail-Followup-To: "freebsd-questions@freebsd.org" References: <408.1020086738@www2.gmx.net> <20020429140542.50D26BB29@i8k.babbleon.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020429140542.50D26BB29@i8k.babbleon.org> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Brian! On Mon, 29 Apr 2002, Brian T.Schellenberger wrote: > It was the user-friendliness of Linux that soured me on it (meaning, > there was too much Gui glop that got in the way of me finding the > scripts and such where the action really was, plus it became just > impossible to rebuild a kernel anymore), but perhaps you prefer that, > in which case Linux might be a better choice *unless* there's > something about FreeBSD you prefer. Why do you think rebuilding a kernel is impossible with Linux? Greetings, Mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:30:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-63-207-60-43.dsl.lsan03.pacbell.net [63.207.60.43]) by hub.freebsd.org (Postfix) with ESMTP id A7F6237B404 for ; Thu, 2 May 2002 18:30:35 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id E700266BC4; Thu, 2 May 2002 18:30:34 -0700 (PDT) Date: Thu, 2 May 2002 18:30:34 -0700 From: Kris Kennaway To: "Michael W.Holdeman" Cc: FreeBSD Questions Subject: Re: Kernel compile fails 4.5R Message-ID: <20020502183034.A44683@xor.obsecurity.org> References: <02050211025001.04136@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="ZPt4rx8FFjLCG7dd" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <02050211025001.04136@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 11:02:50AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, May 02, 2002 at 11:02:50AM -0400, Michael W.Holdeman wrote: > make ( always fails, different messages EACH time. Sometimes talkling abo= ut=20 > white spaces in files?, other times talking about invalid pipes, or kerne= l=20 > panics?) This is a dead giveaway that you have malfunctioning hardware. CPU cooling and bad RAM are the two main causes, but it could also be other problems. Kris --ZPt4rx8FFjLCG7dd Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80eg6Wry0BWjoQKURAoIsAKCde7yOJi+th4PyGXtiPwjgNy8DOgCgzj9p d/BU5thN4avoKeJFv5S5ej4= =rVbv -----END PGP SIGNATURE----- --ZPt4rx8FFjLCG7dd-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:33:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-63-207-60-43.dsl.lsan03.pacbell.net [63.207.60.43]) by hub.freebsd.org (Postfix) with ESMTP id 7A2F237B416 for ; Thu, 2 May 2002 18:33:25 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id C6F2A66C0D; Thu, 2 May 2002 18:33:24 -0700 (PDT) Date: Thu, 2 May 2002 18:33:24 -0700 From: Kris Kennaway To: Jean-Mark Dupoux Cc: mpd , questions@FreeBSD.ORG Subject: Re: Mac&Tosh Message-ID: <20020502183324.B44683@xor.obsecurity.org> References: <3CD1A85C.CCAEC2E8@lineone.net> <20020502175219.A32601@rochester.rr.com> <3CD1D29F.FCEDB40F@lineone.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="uQr8t48UFsdbeI+V" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <3CD1D29F.FCEDB40F@lineone.net>; from jmdupoux@lineone.net on Fri, May 03, 2002 at 12:58:23AM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --uQr8t48UFsdbeI+V Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, May 03, 2002 at 12:58:23AM +0100, Jean-Mark Dupoux wrote: > > Wrong. NetBSD will certainly run on this hardware. OpenBSD might, as we= ll. > > FreeBSD will not. >=20 >=20 > >From what I understood, "official" support on Apple's part for OSx was > restricted to "real" G3 machines so it looks like openbsd might still > have problems but Netbsd fully suported. Wouldnt know about the video > card though. You're confused. The fact that OS X only supports G3 machines has nothing to do with the machines that NetBSD and OpenBSD support, since they are not OS X. Kris --uQr8t48UFsdbeI+V Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80ejkWry0BWjoQKURAtbWAJ92TTSUwAgKjxQn6WdXB5G67rAisgCgoW2O dro8SKxrZPjBUqZ51oyEqyc= =iUBl -----END PGP SIGNATURE----- --uQr8t48UFsdbeI+V-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:33:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from utility.clubscholarship.com (utility.clubscholarship.com [198.78.70.175]) by hub.freebsd.org (Postfix) with ESMTP id 7DF7D37B404 for ; Thu, 2 May 2002 18:33:41 -0700 (PDT) Received: from localhost (root@localhost) by utility.clubscholarship.com (8.11.6/8.11.6) with ESMTP id g431Uu575233; Thu, 2 May 2002 18:30:57 -0700 (PDT) (envelope-from root@utility.clubscholarship.com) Date: Thu, 2 May 2002 18:30:56 -0700 (PDT) From: Patrick Thomas To: Walter Hop Cc: Subject: Re: confusing CPU stats in `top` In-Reply-To: <20020503011942.N67241-100000@surreal.nl> Message-ID: <20020502182856.F29785-100000@utility.clubscholarship.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Does this mean I should be less worried about a quad-proc machine at overall 50% idle than a single processor machine at 50% idle ? (because a single proc system at 50% idle worries me....) thanks, PT On Fri, 3 May 2002, Walter Hop wrote: > [in reply to Patrick Thomas , 02/05/02] > > > As you can see, the server reports 69.7% idle > > > > BUT, that would imply processes using up a total of (30.3 x 4) `top` > > reported percent ... which is not the case - if you add up the > > percentages in the `top` reported processes, they add up to ~58 or so, > > and if we divide that by four we would expect to see 85% idle or so, > > instead of 69.7% idle. > > The FreeBSD 4.x kernel has an inefficiency in SMP systems: while one > processor is running in the kernel, the other processors cannot due to > resource locking, so they have to wait. This causes the system to be > less idle than an ideal system. > > (FreeBSD 5 is expected to solve a lot of these issues, but also with > that kernel you will see that you can't just multiply CPU power by the > number of processors, there's always some overhead involved.) > > Also the numbers in "top" are just rough measures.. > > -- > Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 18:49:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hobbiton.shire.net (frogmorton.shire.net [204.228.145.136]) by hub.freebsd.org (Postfix) with ESMTP id B9E9837B400 for ; Thu, 2 May 2002 18:49:39 -0700 (PDT) Received: from [68.64.98.90] (helo=localhost) by hobbiton.shire.net with asmtp (Exim 3.22 #6) id 173SCp-0001PX-00; Thu, 02 May 2002 19:49:55 -0600 Date: Thu, 2 May 2002 21:49:34 -0400 Subject: Re: Mac&Tosh Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v481) Cc: Jean-Mark Dupoux , mpd , questions@FreeBSD.ORG To: Kris Kennaway From: "Chad Leigh -- Shire.Net LLC" In-Reply-To: <20020502183324.B44683@xor.obsecurity.org> Message-Id: <05157510-5E38-11D6-827D-000502EDE760@shire.net> Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.481) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thursday, May 2, 2002, at 09:33 , Kris Kennaway wrote: > On Fri, May 03, 2002 at 12:58:23AM +0100, Jean-Mark Dupoux wrote: >>> Wrong. NetBSD will certainly run on this hardware. OpenBSD might, as >>> well. >>> FreeBSD will not. >> >> >>> From what I understood, "official" support on Apple's part for OSx was >> restricted to "real" G3 machines so it looks like openbsd might still >> have problems but Netbsd fully suported. Wouldnt know about the video >> card though. > > You're confused. The fact that OS X only supports G3 machines has > nothing > to do with the machines that NetBSD and OpenBSD support, since they are > not OS X. > That is true, he is confused. However, OS X also runs fine on older machines even though it is not supported. Thanks to the open source Darwin core of OS X, people have hacked the drivers necessary to get these older machines to run OS X too. I use a 9600 with 500mhz G3 upgrade and Sonnet IDE adapter. and hit platforms both show a PPC based version for Mac HW. http://eshop.macsales.com/OSXCenter/XPostFacto/ is for older legacy Macs like the original poster's 8500. best regards Chad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 19: 4:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fastmail.fm (fastmail.fm [209.61.183.86]) by hub.freebsd.org (Postfix) with ESMTP id 6B5F737B417 for ; Thu, 2 May 2002 19:04:08 -0700 (PDT) Received: from fastmail.fm (localhost [127.0.0.1]) by localhost.localdomain (Postfix) with ESMTP id 2FA436DA64; Thu, 2 May 2002 21:04:00 -0500 (CDT) Received: by fastmail.fm (Postfix, from userid 99) id 6C4C56DA62; Thu, 2 May 2002 21:03:59 -0500 (CDT) Content-Disposition: inline Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 2.117 (F2.6; T0.14; A1.42; B2.12; Q2.03) Date: Fri, 3 May 2002 02:03:59 +0000 From: "Richard Shea" To: "Roger 'Rocky' Vetterberg" Reply-To: "Richard Shea" X-Epoch: 1020391440 X-Sasl-enc: 1LZmPzrl/yee1naJuFbm2g Cc: "FreeBSD Questions" Subject: Re: getting amount of ram with sysctl Message-Id: <20020503020359.6C4C56DA62@fastmail.fm> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 03 May 2002 03:17:37 +0200, "Roger 'Rocky' Vetterberg" said: > Richard Shea wrote: > > > Hi - Sorry I don't have an answer to your question but I would like to > > do this myself and I don't know how (I don't know how to do it at all, > > forget about accuracy !). > > > > I've looked at 'man sysctl' and I can't see the variables you have > > mentioned - the nearest i've got is 'vm.loadavg'. > > > > Could you post the actual command you're using so that I could try it ? > > > > Sorry about not answering your question, I'm sure someone will ! > > > > regards > > > > richard shea. > > The commands are just 'sysctl vm.stats.vm.v_page_size' and > 'sysctl vm.stats.vm.v_page_count'. > > Someone just told me about 'sysctl hw.physmem' which gives me a > slightly more accurate value, but Im still missing a few megs. > Thanks very much. Just for the record I get sysctl vm.stats.vm.v_page_size = 4096 sysctl vm.stats.vm.v_page_count = 7345 which comes out as : 30,085,120 and sysctl hw.physmem = 30,584,832 Which is quite a bit of difference. As far as I'm aware the box I'm running these on is a '32 Mb machine' which to my way of thinking should mean that : sysctl hw.physmem = 33,554,432 I'm sure there's stuff I don't know about this that would account for some difference between '32 Mb machine' and they physmem but all the same ~ 9% does seem quite a large discrepancy. Doubtless someone out there can explain this ... ? regards richard shea -- http://fastmail.fm - One of many happy users: http://www.fastmail.fm/docs/quotes.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 19:14:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.evohost.com (ns1.evohost.com [66.33.25.40]) by hub.freebsd.org (Postfix) with ESMTP id 5382837B41F for ; Thu, 2 May 2002 19:14:08 -0700 (PDT) Received: from 66.33.41.244 (adsl-32-223-27.bct.bellsouth.net [67.32.223.27]) by silvermanchiropractic.com (8.10.2/8.10.2) with SMTP id g432Vxi28481 for ; Thu, 2 May 2002 22:31:59 -0400 Message-Id: <1020392013.694@33.41.244> Date: Thu, 02 May 2002 22:13:33 2000 To: freebsd-questions@freebsd.org From: "brian14@angelfire.com" Subject: Congratulations you can now get DSL (broadband) and Satellite TV in your area. MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Congratulations you can now get DSL (broadband) and Satellite TV in your area. Get fantastic deals on these two items at http://www.angelfire.com/biz/brian14. This is a one time offer. You will only get this email once! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 19:41:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id 0523B37B416 for ; Thu, 2 May 2002 19:41:40 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id E504DA804; Fri, 3 May 2002 12:41:37 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id E35E4542D; Fri, 3 May 2002 12:41:37 +1000 (EST) Date: Fri, 3 May 2002 12:41:37 +1000 (EST) From: Andrew To: default013 subscriptions Cc: jeff@boris.st.hmc.edu, Subject: Re: Restricting PS Use In-Reply-To: Message-ID: <20020503124007.K30451-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2 May 2002, default013 subscriptions wrote: > I wish I could do the sysctl thing, but I am using FreeBSD 4.1 ... > Apparently there is no setting for that in my distribution. > > I will give the other way a shot, but... am I right in assuming that I won't > be able to use the sysctl answer? ... I wonder if I could just upgrade > sysctl... No good just upgrading the sysctl command...its the kernel where the sysctls actually live so you would want to do a full OS upgrade for that. You could easily (I would think) just hack the ps source to do that, add an extra argument to show all processes and make sure that only root is allowed to use that argument. Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 20:11:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from goose.prod.itd.earthlink.net (goose.mail.pas.earthlink.net [207.217.120.18]) by hub.freebsd.org (Postfix) with ESMTP id 8C65A37B417 for ; Thu, 2 May 2002 20:11:45 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by goose.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173TU0-0007WW-00; Thu, 02 May 2002 20:11:44 -0700 Received: from yafa (yafa [192.168.0.100]) by ns.flncs.com (Postfix) with SMTP id DA27A557E; Thu, 2 May 2002 23:15:07 -0400 (EDT) Message-ID: <001801c1f24f$b304d0e0$6400a8c0@yafa> From: "Moti Levy" To: "Loren Koss" Cc: References: Subject: Re: poptop problem.. Date: Thu, 2 May 2002 23:07:46 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG if i'm not mistaken you need to compile NETGRAPH support into your kernel ( just the NETGRAPH ) Moti ----- Original Message ----- From: "Loren Koss" To: "Moti" Cc: Sent: Thursday, May 02, 2002 9:27 PM Subject: Re: poptop problem.. > Yeah, I'm using FreeBSD.. Okay, i've installed mpd-netgraph, but I get > this when I start it: > > Multi-link PPP for FreeBSD, by Archie L. Cobbs. > Based on iij-ppp, by Toshiharu OHNO. > mpd: pid 63798, version 3.3 (root@unix.pciway.com 18:16 2-May-2002) > [pptp] ppp node is "mpd63798-pptp" > [pptp] can't connect iface and inet: File exists > [pptp] netgraph initialization failed > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > mpd: no bundles defined > > Here is my mpd.conf file: > > default: > load pptp > pptp: > new -i ng0 pptp pptp > set iface disable on-demand > #set iface enable proxy-arp > set bundle disable multilink > set link yes acfcomp protocomp > set link no pap chap > set link enable chap > set link keep-alive 60 180 > set ipcp yes vjcomp > set ipcp ranges 10.10.50.201/32 10.10.50.210/32 > set ipcp dns 10.10.50.1 > set ipcp nbns 10.10.50.1 > > set bundle enable compression > set ccp yes mppc > #set ccp yes mpp-e40 > set ccp no mpp-e40 > set ccp yes mpp-e128 > set ccp yes mpp-stateless > set bundle yes crypt-reqd > > and mpd.links: > > pptp0: > set link type pptp > set pptp self 10.10.50.200 > set pptp enable incoming > set pptp disable originate > > What else do I have to do?? The instructions are not as concrete as it > would seem.. > > Thanks for your help! > > Loren > > On Thu, 2 May 2002, Moti wrote: > > > this is a freebsd list so i'll presume you're using freebsd . > > if i'm correct than take poptop and through out the windows ... > > use mpd netgraph as a pptp server . > > here's the link you need : > > http://www.itga.com.au/~gnb/vpn/pptp-serv.html > > it's simple robust and works like a charmmmmmmmmmm > > moti > > ----- Original Message ----- > > From: "Loren Koss" > > To: > > Sent: Thursday, May 02, 2002 5:38 PM > > Subject: poptop problem.. > > > > > > > I know there is a mailing list for poptop but it doesn't look like anyone > > > responds.. I don't want to waste bandwidth on this list unnecessarily, so > > > if anyone has any experience with this app, could you please email me as I > > > am having some difficulty with it and really want to get it working. > > > > > > Thanks > > > Loren > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 20:24:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unix.pciway.com (w050.z065104054.lax-ca.dsl.cnc.net [65.104.54.50]) by hub.freebsd.org (Postfix) with ESMTP id C818837B405 for ; Thu, 2 May 2002 20:24:16 -0700 (PDT) Received: from unix.pciway.com (localhost.pciway.com [127.0.0.1]) by unix.pciway.com (8.12.2/8.11.1) with ESMTP id g433OFuo055475; Thu, 2 May 2002 20:24:15 -0700 (PDT) (envelope-from loren@pciway.com) Received: from localhost (loren@localhost) by unix.pciway.com (8.12.2/8.12.2/Submit) with ESMTP id g433OEYB055466; Thu, 2 May 2002 20:24:14 -0700 (PDT) X-Authentication-Warning: unix.pciway.com: loren owned process doing -bs Date: Thu, 2 May 2002 20:24:14 -0700 (PDT) From: Loren Koss To: Moti Levy Cc: freebsd-questions@freebsd.org Subject: Re: poptop problem.. In-Reply-To: <001801c1f24f$b304d0e0$6400a8c0@yafa> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Yeah, I figured that after looking through the LINT config file.. I'm rebuilding the world and the kernel right now so I'll let you know if that works.. They should really add that to the docs, dont ya think? Thanks for all your help! Loren On Thu, 2 May 2002, Moti Levy wrote: > if i'm not mistaken you need to compile NETGRAPH support into your kernel > ( just the NETGRAPH ) > > Moti > ----- Original Message ----- > From: "Loren Koss" > To: "Moti" > Cc: > Sent: Thursday, May 02, 2002 9:27 PM > Subject: Re: poptop problem.. > > > > Yeah, I'm using FreeBSD.. Okay, i've installed mpd-netgraph, but I get > > this when I start it: > > > > Multi-link PPP for FreeBSD, by Archie L. Cobbs. > > Based on iij-ppp, by Toshiharu OHNO. > > mpd: pid 63798, version 3.3 (root@unix.pciway.com 18:16 2-May-2002) > > [pptp] ppp node is "mpd63798-pptp" > > [pptp] can't connect iface and inet: File exists > > [pptp] netgraph initialization failed > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > mpd: no bundles defined > > > > Here is my mpd.conf file: > > > > default: > > load pptp > > pptp: > > new -i ng0 pptp pptp > > set iface disable on-demand > > #set iface enable proxy-arp > > set bundle disable multilink > > set link yes acfcomp protocomp > > set link no pap chap > > set link enable chap > > set link keep-alive 60 180 > > set ipcp yes vjcomp > > set ipcp ranges 10.10.50.201/32 10.10.50.210/32 > > set ipcp dns 10.10.50.1 > > set ipcp nbns 10.10.50.1 > > > > set bundle enable compression > > set ccp yes mppc > > #set ccp yes mpp-e40 > > set ccp no mpp-e40 > > set ccp yes mpp-e128 > > set ccp yes mpp-stateless > > set bundle yes crypt-reqd > > > > and mpd.links: > > > > pptp0: > > set link type pptp > > set pptp self 10.10.50.200 > > set pptp enable incoming > > set pptp disable originate > > > > What else do I have to do?? The instructions are not as concrete as it > > would seem.. > > > > Thanks for your help! > > > > Loren > > > > On Thu, 2 May 2002, Moti wrote: > > > > > this is a freebsd list so i'll presume you're using freebsd . > > > if i'm correct than take poptop and through out the windows ... > > > use mpd netgraph as a pptp server . > > > here's the link you need : > > > http://www.itga.com.au/~gnb/vpn/pptp-serv.html > > > it's simple robust and works like a charmmmmmmmmmm > > > moti > > > ----- Original Message ----- > > > From: "Loren Koss" > > > To: > > > Sent: Thursday, May 02, 2002 5:38 PM > > > Subject: poptop problem.. > > > > > > > > > > I know there is a mailing list for poptop but it doesn't look like > anyone > > > > responds.. I don't want to waste bandwidth on this list > unnecessarily, so > > > > if anyone has any experience with this app, could you please email me > as I > > > > am having some difficulty with it and really want to get it working. > > > > > > > > Thanks > > > > Loren > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 20:49:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from natsemi-bh.nsc.com (natsemi-bh.nsc.com [204.163.202.66]) by hub.freebsd.org (Postfix) with ESMTP id 1797A37B41A for ; Thu, 2 May 2002 20:49:55 -0700 (PDT) Received: (from uucp@localhost) by natsemi-bh.nsc.com (8.8.8/8.6.11) id UAA13443 for ; Thu, 2 May 2002 20:49:54 -0700 (PDT) Received: from nsc.nsc.com(139.187.81.1) by natsemi-bh.nsc.com via smap (4.1) id xma013418; Thu, 2 May 02 20:49:04 -0700 Received: from malkauns.malkauns.nsc.com (malkauns.nsc.com [139.187.83.131]) by nsc.nsc.com (8.10.2+Sun/8.10.2) with SMTP id g433mxS18041 for ; Thu, 2 May 2002 20:49:00 -0700 (PDT) Received: from malkauns.nsc.com by malkauns.malkauns.nsc.com (SMI-8.6/SMI-SVR4) id JAA10511; Fri, 3 May 2002 09:24:35 +0530 Message-ID: <3CD2099A.4083B647@malkauns.nsc.com> Date: Fri, 03 May 2002 09:22:58 +0530 From: shubhamr Reply-To: shubhamr@malkauns.nsc.com X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "questions@FreeBSD.ORG" Subject: Networking tutorial? References: <20020502143346.66447.qmail@web11606.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi , Do anyone know about any good tutorial on writing FreeBSD network drivers?I have searched on it,but could not find any.Only one guide is there,where he explains to write charater and block devices but has nothing on network drivers(excepting for the names of the entry points and *nothing* else). Thanks in advance, shubha Michael Reynolds wrote: > > > I have been running NET CAFE with BSD box as a > > > Gateway. Could you inform me the Intenet sites that > > > provide open source version of Net Cafe Billing ? > > > Thank fo reply > > > > Have you considered just using ipfw and wrting a script to grab the stats > > every now and then? > > I've done just that using a php script run via command line. Still working on how to save stats > and restore them at reboot, since ipfw doesn't store the stats to disk. > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 20:54:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nkuaxp.nku.edu (axp1.nku.edu [192.122.237.2]) by hub.freebsd.org (Postfix) with ESMTP id D8B0E37B41D for ; Thu, 2 May 2002 20:54:14 -0700 (PDT) Received: from conversion.NKU.EDU by NKU.EDU (PMDF V6.1 #37499) id <01KH9R9GKBOW00EFND@NKU.EDU> for freebsd-questions@freebsd.org; Thu, 02 May 2002 23:54:11 -0500 (EST) Received: from [172.25.32.7] by NKU.EDU (PMDF V6.1 #37499) with ESMTP id <01KH9R9E5T4U00FVEA@NKU.EDU> for freebsd-questions@freebsd.org; Thu, 02 May 2002 23:54:10 -0500 (EST) Date: Thu, 02 May 2002 23:54:07 -0400 From: Shawn Walker Subject: Remote Upgrade To: freebsd-questions@freebsd.org Message-id: MIME-version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7bit User-Agent: Microsoft-Entourage/10.0.0.1331 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I currently have a box running 4.1-RELEASE. It is not possible for me to gain physical access to the box, so I was wondering if it is possible to upgrade the box remotely. I have looked at the instructions in the handbook and in /usr/src/UPDATING, but there is some mention of a few steps that should be completed in single user mode. Is it possible to do this remotely? Thanks, -- Shawn Walker shawn@eblend.org <-----> http://www.eblend.org/ "In rural areas, we're not going to have full coverage until cows talk." -- Dan Dan Wilinsky, Sprint PCS To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 21:18:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from its-mail1.massey.ac.nz (its-mail1.massey.ac.nz [130.123.128.11]) by hub.freebsd.org (Postfix) with ESMTP id 8485537B417 for ; Thu, 2 May 2002 21:18:53 -0700 (PDT) Received: from its-mm1.massey.ac.nz (its-mm1.massey.ac.nz [130.123.128.45]) by its-mail1.massey.ac.nz (8.9.3/8.9.3) with ESMTP id QAA00785 for ; Fri, 3 May 2002 16:18:42 +1200 (NZST) Received: from its-xchg2.massey.ac.nz (not verified[130.123.128.28]) by its-mm1.massey.ac.nz with MailMarshal (4,2,5,0) id ; Fri, 03 May 2002 16:18:42 +1200 Received: by its-xchg2.massey.ac.nz with Internet Mail Service (5.5.2655.55) id ; Fri, 3 May 2002 16:18:42 +1200 Message-ID: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz> From: "Defryn, Guy" To: "'freebsd-questions@FreeBSD.ORG'" Subject: How do I delete directories and subdirectories at once Date: Fri, 3 May 2002 16:18:42 +1200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is probably a silly question but I cannot figure out how to delete directories, subdirectories and all files in one go. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 21:23:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from bsd1.ashleyweb.net (bsd1.ashleyweb.net [64.216.81.209]) by hub.freebsd.org (Postfix) with ESMTP id 68F8E37B400 for ; Thu, 2 May 2002 21:23:31 -0700 (PDT) Received: from thebeast (ash-64-216-81-212.ashleyweb.net [64.216.81.212] (may be forged)) by bsd1.ashleyweb.net (8.11.6/8.11.6) with SMTP id g434M4M03635 for ; Thu, 2 May 2002 23:22:04 -0500 (CDT) (envelope-from shane@ashleyweb.net) From: "Shane Ashley" To: "Freebsd-Questions" Subject: smtp relay from internal net with out dns resolution Date: Thu, 2 May 2002 23:23:28 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG quick questions about mail relay and telnet I have a bsd(4.4) box that is on the DMZ of a firewall box. the secured network can reach it but it can not reach the secured network (therefore can not reach the internal dns server). I am having a difficulty using this box as a mail relay because it is trying to resolve the clients ip address and can't cause it can't reach the internal dns server for reverse look ups. the client app is timing out waiting for the server to give it a response. is there any way to disable the reverse lookups for telnet so that I can simply use ip address restrictions to allow relaying? or do I need to set up a zone record for each of the possible ip blocks (with generic names) in external bsd servers dns record? I'm still a little new at unix/freebsd so any help you can offer would be greatly appreciated. Thanks, Shane ps already disabled name resolution in sendmail. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 21:25: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id DD88E37B41C for ; Thu, 2 May 2002 21:25:01 -0700 (PDT) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id AF33E2B84C; Fri, 3 May 2002 06:24:58 +0200 (CEST) Received: by k7.mavetju.org (Postfix, from userid 1001) id 1532E50A; Fri, 3 May 2002 14:24:58 +1000 (EST) Date: Fri, 3 May 2002 14:24:58 +1000 From: Edwin Groothuis To: "Defryn, Guy" Cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: How do I delete directories and subdirectories at once Message-ID: <20020503142458.D56548@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , "Defryn, Guy" , "'freebsd-questions@FreeBSD.ORG'" References: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz>; from G.P.Defryn@massey.ac.nz on Fri, May 03, 2002 at 04:18:42PM +1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 04:18:42PM +1200, Defryn, Guy wrote: > This is probably a silly question but I cannot figure out how to > delete directories, subdirectories and all files in one go. recursive removing: rm -r Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 21:25:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sub21-156.member.dsl-only.net (sub21-156.member.dsl-only.net [63.105.21.156]) by hub.freebsd.org (Postfix) with ESMTP id 7748737B41A for ; Thu, 2 May 2002 21:25:44 -0700 (PDT) Received: from sub21-156.member.dsl-only.net (freebsd.localhost.localdomain [127.0.0.1]) by sub21-156.member.dsl-only.net (8.11.6/8.11.6) with SMTP id g434VJC19745; Thu, 2 May 2002 21:31:19 -0700 (PDT) (envelope-from nkinkade@dsl-only.com) Date: Thu, 2 May 2002 21:31:18 -0700 From: Nathan Kinkade To: "Defryn, Guy" Cc: freebsd-questions@freebsd.org Subject: Re: How do I delete directories and subdirectories at once Message-Id: <20020502213118.04582b12.nkinkade@dsl-only.com> In-Reply-To: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz> References: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 3 May 2002 16:18:42 +1200 "Defryn, Guy" wrote: > > > This is probably a silly question but I cannot figure out how to > delete directories, subdirectories and all files in one go. > > Thanks rm -rf it's a recursive removal of files....so if you: $ rm -rf /usr/local/www everything below the www dir, and the www dir itself, will be deleted. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 21:37:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from 0lsen.net (12-224-41-96.client.attbi.com [12.224.41.96]) by hub.freebsd.org (Postfix) with ESMTP id 4F9A037B416 for ; Thu, 2 May 2002 21:37:17 -0700 (PDT) Received: by 0lsen.net (Postfix, from userid 1001) id DD374E2C; Thu, 2 May 2002 21:37:12 -0700 (PDT) Date: Thu, 2 May 2002 21:37:12 -0700 From: Clint Olsen To: questions@freebsd.org Subject: Perl 5.6.1 port failed make test Message-ID: <20020503043712.GA12423@0lsen.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.27i Organization: NULlsen Network X-Disclaimer: Mutt Bites! Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG So, is this typical that Perl fails a test? I don't think locales are mission critical to my needs, but I thought it was odd. Thanks, -Clint pragma/locale........# The following locales # # The following locales # # de_AT.ISO8859-15 de_CH.ISO8859-15 de_DE.ISO8859-15 # en_AU.ISO8859-15 en_CA.ISO8859-15 en_GB.ISO8859-15 # en_NZ.ISO8859-15 en_US.ISO8859-15 fi_FI.ISO8859-15 # it_CH.ISO8859-15 it_IT.ISO8859-15 lt_LT.ISO8859-4 nl_BE.ISO8859-15 # nl_NL.ISO8859-15 no_NO.ISO8859-15 sv_SE.ISO8859-15 # # had problems. # FAILED at test 116 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 22: 0:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc52.attbi.com (rwcrmhc52.attbi.com [216.148.227.88]) by hub.freebsd.org (Postfix) with ESMTP id A1F7C37B405 for ; Thu, 2 May 2002 22:00:35 -0700 (PDT) Received: from hume ([12.239.165.26]) by rwcrmhc52.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20020503050034.IBTE4412.rwcrmhc52.attbi.com@hume> for ; Fri, 3 May 2002 05:00:34 +0000 Message-ID: <003801c1f25f$4a45ae20$32040101@hume> From: "Charles Pelletier" To: Subject: freebsd 4.5 failures Date: Thu, 2 May 2002 23:59:21 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG just a question for the masses.. why have so many failed 4.5R installations/upgrades occured? i did a clean install(via ftp) on a P133, ancient Aopen system, had to use a promise UDMA 66 addon card for my harddrive and only have 24 MB ram on my system so you'd think that I of all people would have had major problems. But, my system has been up and running for about a month solid until today (had to reboot post power outtage). Anyways, just wondering, --charlie pelletier --litmus(mp3.com/litmus) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 22:11: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hobbiton.shire.net (frogmorton.shire.net [204.228.145.136]) by hub.freebsd.org (Postfix) with ESMTP id 7823137B405 for ; Thu, 2 May 2002 22:11:04 -0700 (PDT) Received: from [68.64.98.90] (helo=lime.objectwerks.com) by hobbiton.shire.net with asmtp (Exim 3.22 #6) id 173VLk-0002TS-00; Thu, 02 May 2002 23:11:20 -0600 Date: Fri, 3 May 2002 01:11:01 -0400 Subject: Re: freebsd 4.5 failures Content-Type: text/plain; charset=US-ASCII; format=flowed Mime-Version: 1.0 (Apple Message framework v481) Cc: To: "Charles Pelletier" From: Chad Leigh -- Shire.Net LLC In-Reply-To: <003801c1f25f$4a45ae20$32040101@hume> Message-Id: <29111380-5E54-11D6-92CC-0003931BED80@shire.net> Content-Transfer-Encoding: 7bit X-Mailer: Apple Mail (2.481) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday, May 3, 2002, at 12:59 , Charles Pelletier wrote: > just a question for the masses.. > why have so many failed 4.5R installations/upgrades occured? i did a > clean > install(via ftp) on a P133, ancient Aopen system, had to use a promise > UDMA > 66 addon card for my harddrive and only have 24 MB ram on my system so > you'd > think that I of all people would have had major problems. But, my > system has > been up and running for about a month solid until today (had to reboot > post > power outtage). Anyways, just wondering, > I had no problem on a new Abit KG7 Athlon XP 1800+ system with Adaptec 2100S raid card either. Updated to -p4 too after I figured out what tag I needed... I think that for all the hundreds of successes, there are a few failures you hear about... Now if I could just find the time to finish installing my apps and configuring them... (sw wise) Chad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 22:19:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from raiden.jasnetworks.net (raiden.jasnetworks.net [65.194.248.251]) by hub.freebsd.org (Postfix) with ESMTP id 1D4F337B419 for ; Thu, 2 May 2002 22:19:41 -0700 (PDT) Received: from works (works.jasnetworks.net [192.168.0.2]) by raiden.jasnetworks.net (8.11.6/8.11.6) with ESMTP id g435SFA29864 for ; Fri, 3 May 2002 01:28:15 -0400 (EDT) (envelope-from raiden23@netzero.net) Message-Id: <4.2.0.58.20020503012217.0095fca0@pop.netzero.net> X-Sender: raiden23@pop.netzero.net X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Fri, 03 May 2002 01:26:22 -0400 To: freebsd-questions@FreeBSD.ORG From: Lord Raiden Subject: Looking for Sudo web interface Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG HI all. I'm looking for a port that will satisfy an upcoming need I am looking at having to implement. It's not set in stone yet, but I want to be ahead of the ball so when they say go, I flick a switch (so to speak) and we're live. What I'm wanting to do is add mail users to a mail server using a webpage frontend. So say someone who has access to the admin page can add/edit/delete user accounts on the server without adding a home directory. The users being added will only have mail access to the server, nothing more. I also want to make this as simple as possible for the less than unix savey helpdesk guys to be able to add/edit/delete user accounts, change/update passwords, and so on for the mail server for the users who are given a mail account on it. What port can I use to give me such a thing? I know I need to use Apache for the web server side of it, and I'm using Qpopper and Sendmail for the Pop3 and SMTP side of it. Now all I need is the butter in the middle, so to speak, and I'm golden. Any suggestions? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 22:45:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hercules.worldgatein.com (hercules.worldgatein.com [203.109.64.24]) by hub.freebsd.org (Postfix) with ESMTP id 9A2B137B419 for ; Thu, 2 May 2002 22:45:17 -0700 (PDT) Received: from rivendell.worldgatein.net (interoffice.worldgatein.com [203.109.64.31]) by hercules.worldgatein.com (Postfix) with ESMTP id A12141005309 for ; Fri, 3 May 2002 10:46:15 +0530 (IST) Received: by rivendell.worldgatein.net (Postfix, from userid 1001) id 3E6433260F; Fri, 3 May 2002 11:44:27 +0530 (IST) Date: Fri, 3 May 2002 11:44:27 +0530 From: Devdas Bhagat To: freebsd-questions@FreeBSD.ORG Subject: Re: Looking for Sudo web interface Message-ID: <20020503114427.C18105@rivendell.worldgatein.net> Reply-To: Devdas Bhagat Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <4.2.0.58.20020503012217.0095fca0@pop.netzero.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <4.2.0.58.20020503012217.0095fca0@pop.netzero.net>; from raiden23@netzero.net on Fri, May 03, 2002 at 01:26:22AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 03/05/02 01:26 -0400, Lord Raiden wrote: > What I'm wanting to do is add mail users to a mail server using a webpage > frontend. So say someone who has access to the admin page can > add/edit/delete user accounts on the server without adding a home > directory. The users being added will only have mail access to the server, > nothing more. I also want to make this as simple as possible for the less > than unix savey helpdesk guys to be able to add/edit/delete user accounts, > change/update passwords, and so on for the mail server for the users who > are given a mail account on it. If you are adding system users, maybe you could give webmin a try? Devdas Bhagat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 22:55:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from barry.mail.mindspring.net (barry.mail.mindspring.net [207.69.200.25]) by hub.freebsd.org (Postfix) with ESMTP id DA13D37B400; Thu, 2 May 2002 22:55:43 -0700 (PDT) Received: from arkanoid.noc.earthlink.net ([207.69.180.45] helo=arkanoid) by barry.mail.mindspring.net with smtp (Exim 3.33 #1) id 173W2g-0002Uz-00; Fri, 03 May 2002 01:55:43 -0400 Message-ID: <000801c1f267$caa0e5a0$2db445cf@arkanoid> From: "Mike Flanagan" To: Cc: Subject: traceroute option that shows forward and reverse path. Date: Fri, 3 May 2002 02:00:13 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1F246.431CADB0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1F246.431CADB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =20 Hello, I am looking for an option with traceroute that will show you the route = you take externally and back internally. Basically so if I am multihomed and I leave one way = and come back through a different circuit it will show both paths. Unfortunaly I could = not find an option with this. Does anyone know of a different version of traceroute or = maybe a different program or an option with traceroute that I do not know of ? Thanks, Mike ------=_NextPart_000_0005_01C1F246.431CADB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
          &nbs= p;      =20
Hello,
 
 I am looking for an option with = traceroute=20 that will show you the route you take externally
and back internally. Basically so if I = am=20 multihomed and I leave one way and come back
through a different circuit it will = show both=20 paths. Unfortunaly I could not find an option
with this. Does anyone know of a = different version=20 of traceroute or maybe a different program
or an option with=20 traceroute that I do not know of ?
 
 
  Thanks,
 
    =20 Mike
------=_NextPart_000_0005_01C1F246.431CADB0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 23:23:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from zim.sifl.net (zim.sifl.net [207.246.130.68]) by hub.freebsd.org (Postfix) with ESMTP id D4EAC37B404 for ; Thu, 2 May 2002 23:23:50 -0700 (PDT) Received: from VAIO (12-230-236-212.client.attbi.com [12.230.236.212]) by zim.sifl.net (8.12.3/8.12.3) with ESMTP id g436NWfK009547 for ; Thu, 2 May 2002 23:23:33 -0700 (PDT) (envelope-from jesse@206underground.net) From: "Jesse" To: Subject: smmsp errors Date: Thu, 2 May 2002 23:23:43 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG After recently upgrading source on a machine I've begun seeing these messages in /var/log/messages: May 2 23:11:45 zim sm-msp-queue[9329]: g436BjnY009329: SYSERR(root): fill_fd: disconnect: fd 1 not open: Bad file descriptor May 2 23:11:45 zim sm-msp-queue[9329]: g436BjnY009329: SYSERR(root): fill_fd: disconnect: cannot open /dev/null: Permission denied Anyone familiar with this? Jesse To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 23:24:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dot.dreamhost.com (dot.dreamhost.com [216.240.131.10]) by hub.freebsd.org (Postfix) with ESMTP id CEC9F37B41C for ; Thu, 2 May 2002 23:24:00 -0700 (PDT) Received: from winston.dreamhost.com (winston.dreamhost.com [216.240.131.38]) by dot.dreamhost.com (8.12.0.Beta7/8.12.0.Beta7/Debian 8.12.0.Beta7-1) with ESMTP id g436NxuH030964 for ; Thu, 2 May 2002 23:23:59 -0700 Received: from localhost (n74@localhost) by winston.dreamhost.com (8.11.0/8.9.3/Debian 8.9.3-21) with ESMTP id g436Nxp30158 for ; Thu, 2 May 2002 23:23:59 -0700 X-Authentication-Warning: winston.dreamhost.com: n74 owned process doing -bs Date: Fri, 3 May 2002 06:23:59 +0000 (GMT) From: Zach Johnson X-Sender: n74@winston.dreamhost.com To: freebsd-questions@FreeBSD.ORG Subject: can't write-mount / to change fstab Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, My old motherboard fried itself last week. Today I've put in my new and different mobo since they don't make my old one anymore. Problem is with my old mobo I mounted / and /usr and so on NOT as /dev/wd* but instead a different dev. So when I boot BSD it tries to mount things according to fstab but doesn't find things the same, so it dumps me into single user mode. In single user I can SEE fstab in /etc but I can't change it since I'm mounted in read-only. And I can't do a mount -u / since it tells me the current device doesn't match fstab. And I an't do a mount -u /dev/foo / since it tells me that /dev/foo doesn't exist!! But I can't CREATE /dev/foo since / is mounted read-only!!! How the heck am I going to change fstab and create the dev's I need so I can mount the rest of my file system? Any help would be GREATLY appreciated, Zach Johnson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 23:24:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mplspop4.mpls.uswest.net (mplspop4.mpls.uswest.net [204.147.80.14]) by hub.freebsd.org (Postfix) with SMTP id 9022537B420 for ; Thu, 2 May 2002 23:24:37 -0700 (PDT) Received: (qmail 41554 invoked from network); 3 May 2002 06:24:36 -0000 Received: from unknown (HELO jenny) (63.231.238.225) by mplspop4.mpls.uswest.net with SMTP; 3 May 2002 06:24:36 -0000 Date: Fri, 3 May 2002 01:35:02 -0500 Message-ID: From: "Budec" To: questions@freebsd.org Subject: Networking Buffers MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am currently running FreeBSD i386 4.5 Stable and having some network issuses. The machine is a 300 Mhz, AMD K6-2 with 512 meg ram and 2 intel ether net pro nicks. Has dual 100 Gig WD IDE drives, and one 4 gig samsung HD. The main purpose of this box is for firewall between networks and file server. The network traffic on it is quite high, it currently rsyncs/robocopies to 4 other servers on the same network over a 100mb connection though smb/nfs and currently routes all traffic between 2 network, each with 10+ workstation that require a high amount of bandwidth (real time network application + vnc sessions + file copies). The box seems to keep up fine without network delays, but sometimes one of the nics just freezes. The issuse I am having on it, is it seems I am "blowing out" one of the nics. I am sure this FreeBSD related, because this box use to run W2K with a higher network load and didn't expeirence any issuses. After a high spike it network load (when we backup all data in the middle of the night) one of the ip address will stop responding. I log in locally and the network tables are fine, but when I try to ping out of that network card it gives the error message "ping: no buffers avaiable" Taking the nic up then back down (`ifconfig fxp0 down; ifconfig fxp0 up`) will fix the issuse, but is a huge problem because it is very distrubating to network operation, espically during nightly backups/data merges when no one is onsite. I replaced the nic with a brand new one that is the same model, and also with a new one that is a differant brand/model and it is still having issuses. In sysctl I changed (IIRC) "net.inet.tcp.sendspace" and "net.inet.recvspace" both to 8192 (thinking it is Kb?), that still had issuses, so I change it to 8192000 (thinking it might be bytes) and also tried 8192000000. All these settings still cause FreeBSD to drop the nic. What is the size of these variables? (ie. mb, kb, etc ?) Also, are these the correct settings? Is network buffers configured some where else? I have yet to find complete and full documentation on sysctl, anyone know where I could get these docs, freebsd.com has very incomplete and out of data documentation in regards to sysctl variables and kernel tweaking in general... Also is there any type of intelligent networking buffering in FreeBSD? Something that would say "If network buffers are full, pause network traffic, flush buffers, continue with network traffic" ? This way, if the buffers are full, it won't take out the nic completly, but rather hang it, and then continue after the buffers had be purged? I think this would be a more graceful method of handling this, instead of "Opps, buffers are full, sorry but your server is useless now"... Anyone know how to enable this? Also it is very strange that something this critical isn't logged to syslog, what do I have to have in /etc/syslog.conf to get this info, I basically turned on everything to debug, and didn't see anything to messages, console or all.log. It is kinda funny, this server went down again when I was typing this email.. I can tell when it goes down cause, winamp disconnects from server and then I hear the solaris admin 4 rooms down swearing at freebsd :) I got to get this fixed soon or will be forced to move it back to W2K, any ideas? Regards, Jack To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 23:27:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from utility.clubscholarship.com (utility.clubscholarship.com [198.78.70.175]) by hub.freebsd.org (Postfix) with ESMTP id A411C37B416 for ; Thu, 2 May 2002 23:27:40 -0700 (PDT) Received: from localhost (root@localhost) by utility.clubscholarship.com (8.11.6/8.11.6) with ESMTP id g436P2B86820 for ; Thu, 2 May 2002 23:25:02 -0700 (PDT) (envelope-from root@utility.clubscholarship.com) Date: Thu, 2 May 2002 23:25:02 -0700 (PDT) From: Patrick Thomas To: Subject: any issues related to installing new physical RAM ? Message-ID: <20020502232257.N86733-100000@utility.clubscholarship.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am planning on: 1. shutting down my 4.5-RELEASE server 2. putting 2 more gigs of RAM into it 3. booting it back up. ---- Is there anything I should be aware of ? If I have set custom values to things like maxfiles, etc., and suddenly the maxusers gets set higher due to having more ram, will anything go wrong ? Or will everything be exactly the same, but now with more ram ? Just looking to cover all my bases before I do this upgrade - any related comments/suggestions appreciated. --PT To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu May 2 23:48:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mplspop4.mpls.uswest.net (mplspop4.mpls.uswest.net [204.147.80.14]) by hub.freebsd.org (Postfix) with SMTP id 8047C37B41C for ; Thu, 2 May 2002 23:48:44 -0700 (PDT) Received: (qmail 60989 invoked from network); 3 May 2002 06:48:43 -0000 Received: from unknown (HELO jenny) (63.231.238.225) by mplspop4.mpls.uswest.net with SMTP; 3 May 2002 06:48:43 -0000 Date: Fri, 3 May 2002 01:59:08 -0500 Message-ID: From: "Maildrop" To: "Budec" , questions@freebsd.org Subject: RE: Networking Buffers MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG WTF, now this is happening on both interfaces :( sigh ping: socket: No buffer space available telnet: socket: No buffer space available Anyone know why FreeBSD is starting to suck so bad when it comes to networking? J > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Budec > Sent: Friday, May 03, 2002 1:35 AM > To: questions@freebsd.org > Subject: Networking Buffers > > > > I am currently running FreeBSD i386 4.5 Stable and having some network > issuses. > > The machine is a 300 Mhz, AMD K6-2 with 512 meg ram and 2 intel ether net > pro nicks. > Has dual 100 Gig WD IDE drives, and one 4 gig samsung HD. > > The main purpose of this box is for firewall between networks and file > server. > > The network traffic on it is quite high, it currently > rsyncs/robocopies to 4 > other servers > on the same network over a 100mb connection though smb/nfs and currently > routes all traffic between > 2 network, each with 10+ workstation that require a high amount > of bandwidth > (real time network application + vnc sessions + file copies). > The box seems to keep up fine without network delays, but sometimes one of > the nics just freezes. > > The issuse I am having on it, is it seems I am "blowing out" one of the > nics. > I am sure this FreeBSD related, because this box use to run W2K with a > higher > network load and didn't expeirence any issuses. > > After a high spike it network load (when we backup all data in > the middle of > the night) one > of the ip address will stop responding. I log in locally and the network > tables are fine, but > when I try to ping out of that network card it gives the error message > "ping: no buffers avaiable" > > Taking the nic up then back down (`ifconfig fxp0 down; ifconfig fxp0 up`) > will fix the issuse, but > is a huge problem because it is very distrubating to network operation, > espically during nightly > backups/data merges when no one is onsite. I replaced the nic > with a brand > new one that is the same > model, and also with a new one that is a differant brand/model and it is > still having issuses. > > In sysctl I changed (IIRC) "net.inet.tcp.sendspace" and > "net.inet.recvspace" > both to 8192 (thinking it is Kb?), > that still had issuses, so I change it to 8192000 (thinking it might be > bytes) and also tried 8192000000. > All these settings still cause FreeBSD to drop the nic. What is > the size of > these variables? (ie. mb, kb, etc ?) > > Also, are these the correct settings? Is network buffers configured some > where else? I have yet to find > complete and full documentation on sysctl, anyone know where I could get > these docs, freebsd.com has very > incomplete and out of data documentation in regards to sysctl > variables and > kernel tweaking in general... > > Also is there any type of intelligent networking buffering in FreeBSD? > Something that would > say "If network buffers are full, pause network traffic, flush buffers, > continue with network > traffic" ? This way, if the buffers are full, it won't take out the nic > completly, > but rather hang it, and then continue after the buffers had be purged? I > think this would be a more > graceful method of handling this, instead of "Opps, buffers are > full, sorry > but your server is useless now"... > Anyone know how to enable this? > > Also it is very strange that something this critical isn't logged > to syslog, > what do I have to have in > /etc/syslog.conf to get this info, I basically turned on everything to > debug, and didn't see anything to > messages, console or all.log. > > It is kinda funny, this server went down again when I was typing this > email.. I can tell when it goes down > cause, winamp disconnects from server and then I hear the solaris admin 4 > rooms down swearing at freebsd :) > > I got to get this fixed soon or will be forced to move it back to W2K, any > ideas? > > Regards, > Jack > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 0:13:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx0.gmx.net (mx0.gmx.net [213.165.64.100]) by hub.freebsd.org (Postfix) with SMTP id E52BC37B417 for ; Fri, 3 May 2002 00:13:37 -0700 (PDT) Received: (qmail 23176 invoked by uid 0); 3 May 2002 07:13:36 -0000 Date: Fri, 3 May 2002 09:13:36 +0200 (MEST) From: fabio.f@gmx.de To: questions@freebsd.org MIME-Version: 1.0 Subject: still problems with the sound. X-Priority: 3 (Normal) X-Authenticated-Sender: #0003237773@gmx.net X-Authenticated-IP: [195.179.163.45] Message-ID: <22652.1020410016@www33.gmx.net> X-Mailer: WWW-Mail 1.5 (Global Message Exchange) X-Flags: 0001 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello everybody! I have the soundcard ESS 1869 PnP ISA. Windows configured my sound card as ESS1869 PnP ISA 0x220-0x2bf,0x331-0x33b irq 5 drq 1,0. Dmesg | grep pcm gives the same back after reinstalling the kernel with device pcm and device sbc (options PNPBIOS in the kernel failed): pcm0: on sbc0. And Dmesg | grep sbc: sbc0: 0x220-0x2bf,0x331-0x33b irq 5 drq 1,0 on isa0. Command sh MAKEDEV snd0 &1 gave no pcm0 back. And there's no sound to hear. How can I direct the /dev/dsp to /dev/Null, when problems occuring and I still want to run Applications which rely on sound? On the Debian Linux "Installation howto", it is said that you need to reinstall the kernel with the soundmodul, but also to install a sound driver "OSS" and the PnP configuring tool "isapnp". Why freebsd doesn't need that? What is the sound drivers name in FreeBSD and how do I configure PnP? PKG_Info | less is good for knowing what is installed and pkg_info 'Name*' for a little description, BUT Where can I find a file, where is explicit explained the STARTING COMMAND. To install from the port, does it mean I have to copy the source from CD to /usr/ports/distfiles and then type command make install? Why can't /stand/sysinstall not install the 3.3.6.10 package from the 4th cd. you told me to install it from the first CD. Once again, the applications on the 4th CD need XFree86 3.3.6.10 and not XFree86 3.3.6.9 from the first CD. When I try to start an audio CD in GNOME with the GNOME-CD-Player, before I mount it on /cdrom, it failed with "no RockRidge 9660" or something like that. What went wrong? Greetings from Berlin, Germany Fabio -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 1: 1:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from salmon.maths.tcd.ie (salmon.maths.tcd.ie [134.226.81.11]) by hub.freebsd.org (Postfix) with SMTP id D6E9737B404 for ; Fri, 3 May 2002 01:01:18 -0700 (PDT) Received: from walton.maths.tcd.ie by salmon.maths.tcd.ie with SMTP id ; 3 May 2002 09:01:17 +0100 (BST) To: Zach Johnson Cc: freebsd-questions@FreeBSD.ORG Subject: Re: can't write-mount / to change fstab In-Reply-To: Your message of "Fri, 03 May 2002 06:23:59 -0000." Date: Fri, 03 May 2002 09:01:17 +0100 From: Ian Dowse Message-ID: <200205030901.aa20608@salmon.maths.tcd.ie> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In message , Za ch Johnson writes: >In single user I can SEE fstab in /etc but I can't change it since I'm >mounted in read-only. And I can't do a mount -u / since it tells me the >current device doesn't match fstab. And I an't do a mount -u >/dev/foo / since it tells me that /dev/foo doesn't >exist!! But I can't CREATE /dev/foo since / is mounted >read-only!!! > >How the heck am I going to change fstab and create the dev's I need so I >can mount the rest of my file system? The normal way to fix this is to use a shell from a fixit floppy or the installation CD, but there is a trick you can use: mount_mfs -T fd1440 none /mnt cd /mnt sh /dev/MAKEDEV foo mount -u -o rw /mnt/foo / cd /dev sh /dev/MAKEDEV foo This makes the new device node on an MFS filesystem, which is enough to remount / read-write to create the missing device nodes. Ian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 1: 2:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mufasa.swistgroup.com (mufasa.swistgroup.com [64.245.10.163]) by hub.freebsd.org (Postfix) with ESMTP id 911B137B417 for ; Fri, 3 May 2002 01:02:43 -0700 (PDT) Received: from timon ([172.16.1.30] helo=timon.swistgroup.com) by mufasa.swistgroup.com with esmtp (Exim 3.33 #1) id 173Y1S-0001iO-00 for questions@freebsd.org; Fri, 03 May 2002 10:02:34 +0200 Received: from [172.16.1.3] (helo=steinmail.swistgroup.com) by timon.swistgroup.com with esmtp (Exim 3.33 #1) id 173Y1R-000EOz-00 for questions@freebsd.org; Fri, 03 May 2002 10:02:33 +0200 content-class: urn:content-classes:message Subject: XFree86-4 port install problems... MIME-Version: 1.0 Disposition-Notification-To: "Max Clements" Date: Fri, 3 May 2002 10:02:46 +0200 Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; boundary="----=_NextPart_000_01AC_01C1F289.A3F7EC60"; micalg=SHA1 Message-ID: X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 X-MS-Has-Attach: yes X-MS-TNEF-Correlator: Thread-Topic: XFree86-4 port install problems... Thread-Index: AcHyciLoZJS7yInZQTSHJmqwJuB7BAABOTDQ From: "Max Clements" To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_01AC_01C1F289.A3F7EC60 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi There, Hope this has not been asked before, but I am trying to install XFree86-4 from the ports on a FreeBSD 4.6 pre-release system. The ports are up to date, yet the compile fails after downloading the first source file, and what appears to be while it is making imake. I have included some compiler output below... Any comments would be appreciated... Regards -- Max Clements SWiST Computer Services (Pty) Ltd. - Monday is an awful way to spend 1/7th of your life! Scar#make install clean --some output snipped--- ./config/imake/imake -I./config/cf -s ./config/makedepend/Makefile.proto -f ./config/makedepend/Imakefile -DTOPDIR=../.. -DCURDIR=. /config/makedepend In file included from config/cf/site.def:58, from config/cf/Imake.tmpl:45, from Imakefile.c:13: config/cf/xf86site.def:631: warning: `InstallXdmConfig' redefined config/cf/host.def:5: warning: this is the location of the previous definition config/cf/xf86site.def:632: warning: `InstallXinitConfig' redefined config/cf/host.def:6: warning: this is the location of the previous definition config/cf/xf86site.def:633: warning: `InstallFSConfig' redefined config/cf/host.def:7: warning: this is the location of the previous definition In file included from config/cf/FreeBSD.cf:552, from config/cf/Imake.tmpl:94, from Imakefile.c:13: config/cf/xfree86.cf:14: version.def: No such file or directory In file included from config/cf/site.def:158, from config/cf/Imake.tmpl:100, from Imakefile.c:13: config/cf/host.def:5: warning: `InstallXdmConfig' redefined config/cf/xf86site.def:631: warning: this is the location of the previous definition config/cf/host.def:6: warning: `InstallXinitConfig' redefined config/cf/xf86site.def:632: warning: this is the location of the previous definition config/cf/host.def:7: warning: `InstallFSConfig' redefined config/cf/xf86site.def:637: warning: this is the location of the previous definition config/cf/host.def:10: warning: `BuildFontServer' redefined config/cf/xf86site.def:635: warning: this is the location of the previous definition ./config/imake/imake: Exit code 1. Stop. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries/work/xc. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries/work/xc. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries. *** Error code 1 Stop in /usr/ports/x11/XFree86-4. su-2.05a# ------=_NextPart_000_01AC_01C1F289.A3F7EC60 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIUaTCCAoow ggHzoAMCAQICAwcMoDANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdl c3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsT FENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAw MC44LjMwMB4XDTAyMDMyMjExNDEzN1oXDTAzMDMyMjExNDEzN1owSjEfMB0GA1UEAxMWVGhhd3Rl IEZyZWVtYWlsIE1lbWJlcjEnMCUGCSqGSIb3DQEJARYYY2xlbWVudHNtQHN3aXN0Z3JvdXAuY29t MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDu/ZrJhhf/PuPeRdQ8Dp0qk8vpRIxVqmIjFzvA s3c5QAxwC6Vh1Bmh6oD2W/ZjX7DO6qPpCSI8R99Ng8HWjirUtWQ190rr0eG9e8ETrHiGLaTfqJKv OJbm6yG/i9UTXQkyODRUGaXo/j5CeSbJY4CaK63uZhw04DY8EqbZKbGimQIDAQABozUwMzAjBgNV HREEHDAagRhjbGVtZW50c21Ac3dpc3Rncm91cC5jb20wDAYDVR0TAQH/BAIwADANBgkqhkiG9w0B AQQFAAOBgQAafe98dNAkRSBC1S4m37le6zyh0zmNTGUGVoU0CQ7R2mQQYp5e8AQ/mgT6+CJwe7Xf wyY1feke1ICyDYHBe27hpnSz31JZFERbEHYezwPLjSsoE5ntUF62PUUaAAbiqayCNfOmbuh+Qp77 kdQi1PdBWOM7dq6su1ATCp5ZgtammDCCAy0wggKWoAMCAQICAQAwDQYJKoZIhvcNAQEEBQAwgdEx CzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEa MBgGA1UEChMRVGhhd3RlIENvbnN1bHRpbmcxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2Vydmlj ZXMgRGl2aXNpb24xJDAiBgNVBAMTG1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBDQTErMCkGCSqG SIb3DQEJARYccGVyc29uYWwtZnJlZW1haWxAdGhhd3RlLmNvbTAeFw05NjAxMDEwMDAwMDBaFw0y MDEyMzEyMzU5NTlaMIHRMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIwEAYD VQQHEwlDYXBlIFRvd24xGjAYBgNVBAoTEVRoYXd0ZSBDb25zdWx0aW5nMSgwJgYDVQQLEx9DZXJ0 aWZpY2F0aW9uIFNlcnZpY2VzIERpdmlzaW9uMSQwIgYDVQQDExtUaGF3dGUgUGVyc29uYWwgRnJl ZW1haWwgQ0ExKzApBgkqhkiG9w0BCQEWHHBlcnNvbmFsLWZyZWVtYWlsQHRoYXd0ZS5jb20wgZ8w DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBANRp19SwlGRbcelH2AxRtupykbCEXn0tDY97Et+FJXUo dDpCLGMnn5V7S+9+GYcdhuqj3bnOlmQawhRuRKx85o/oTQ9xH0A4pgCjh3j2+ZSGXq3qwF5269kU o11uenwMpUtVfwYZKX+emibVars4JAhqmMex2qOYkf152+VaxBy5AgMBAAGjEzARMA8GA1UdEwEB /wQFMAMBAf8wDQYJKoZIhvcNAQEEBQADgYEAx+ySfk749ZalZ2IqpPBNEWDQb41gWGGsJrtSNVwI zzD7qEqWih9iQiOMFw/0umScF6xHKd+dmF7SbGBxXKKs3Hnj524ARx+1DSjoAp3kmv0T9KbZfLH4 3F8jJgmRgHPQFBveQ6mDJfLmnC8Vyv6mq4oHdYsM3VGEa+T40c53ooEwggM4MIICoaADAgECAhBm RXK3zHT1z2N2RYTQLpEBMA0GCSqGSIb3DQEBBAUAMIHRMQswCQYDVQQGEwJaQTEVMBMGA1UECBMM V2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xGjAYBgNVBAoTEVRoYXd0ZSBDb25zdWx0 aW5nMSgwJgYDVQQLEx9DZXJ0aWZpY2F0aW9uIFNlcnZpY2VzIERpdmlzaW9uMSQwIgYDVQQDExtU aGF3dGUgUGVyc29uYWwgRnJlZW1haWwgQ0ExKzApBgkqhkiG9w0BCQEWHHBlcnNvbmFsLWZyZWVt YWlsQHRoYXd0ZS5jb20wHhcNMDAwODMwMDAwMDAwWhcNMDQwODI3MjM1OTU5WjCBkjELMAkGA1UE BhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQK EwZUaGF3dGUxHTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25h bCBGcmVlbWFpbCBSU0EgMjAwMC44LjMwMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDeMzKm Y8cJJUU+0m54J2eBxdqIGYKXDuNEKYpjNSptcDz63K737nRvMLwzkH/5NHGgo22Y8cNPomXbDfpL 8dbdYaX5hc1VmjUanZJ1qCeu2HL5ugL217CR3hzpq+AYA6h8Q0JQUYeDPPA5tJtUihOH/7ObnUlm AC0JieyUa+mhaQIDAQABo04wTDApBgNVHREEIjAgpB4wHDEaMBgGA1UEAxMRUHJpdmF0ZUxhYmVs MS0yOTcwEgYDVR0TAQH/BAgwBgEB/wIBADALBgNVHQ8EBAMCAQYwDQYJKoZIhvcNAQEEBQADgYEA MbFLR135AXHl9VNsXXnWPZjAJhNigSKnEvgilegbSbcnewQ5uvzm8iTrkfq97A0qOPdQVahs9w2t TBu8A/S166JHn2yiDFiNMUIJEWywGmnRKxKyQF1q+XnQ6i4l3Yrk/NsNH50C81rbyjz2ROomaYd/ SJ7OpZ/nhNjJYmKtBcYwggSzMIIEHKADAgECAhBn5Cf5RIylgUK6dalmpg14MA0GCSqGSIb3DQEB BQUAMIHRMSYwJAYJKoZIhvcNAQkBFhdzd2lzdC1jYUBzd2lzdGdyb3VwLmNvbTELMAkGA1UEBhMC WkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMSowKAYDVQQKEyFT d2lzdCBDb21wdXRlciBTZXJ2aWNlcyAoUHR5KSBMdGQxKjAoBgNVBAsTIVN3aXN0IENvbXB1dGVy IFNlcnZpY2VzIChQdHkpIEx0ZDEXMBUGA1UEAxMOU3dpc3Rncm91cC5jb20wHhcNMDExMjA0MDgx MTQ3WhcNMDQxMjA0MDgxODIzWjCB0TEmMCQGCSqGSIb3DQEJARYXc3dpc3QtY2FAc3dpc3Rncm91 cC5jb20xCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUg VG93bjEqMCgGA1UEChMhU3dpc3QgQ29tcHV0ZXIgU2VydmljZXMgKFB0eSkgTHRkMSowKAYDVQQL EyFTd2lzdCBDb21wdXRlciBTZXJ2aWNlcyAoUHR5KSBMdGQxFzAVBgNVBAMTDlN3aXN0Z3JvdXAu Y29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC8tgvvoFPYVjasl117B7U9LjfILrIvrPOa jSIuymovMIRoS3xk+Sp1Y/rtCYuimCM0wociYxXr3HZUmzUhN2wH+xGafPupOU8GK5Rxoldm/G/9 SJZPGJ7awL9aJB8oo8Uo9Jd9bgOdlKSAbc8VhfqxvSH/9n0ct9pGSrNoz3kGmQIDAQABo4IBiDCC AYQwEwYJKwYBBAGCNxQCBAYeBABDAEEwCwYDVR0PBAQDAgFGMA8GA1UdEwEB/wQFMAMBAf8wHQYD VR0OBBYEFI+hOfZbODHbGEAJDHIKBdKMm1c8MIIBGgYDVR0fBIIBETCCAQ0wgcSggcGggb6Ggbts ZGFwOi8vL0NOPVN3aXN0Z3JvdXAuY29tKDEpLENOPXN0ZWluZGMsQ049Q0RQLENOPVB1YmxpYyUy MEtleSUyMFNlcnZpY2VzLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9c3dpc3Rncm91 cCxEQz1jb20/Y2VydGlmaWNhdGVSZXZvY2F0aW9uTGlzdD9iYXNlP29iamVjdGNsYXNzPWNSTERp c3RyaWJ1dGlvblBvaW50MESgQqBAhj5odHRwOi8vc3RlaW5kYy5zd2lzdGdyb3VwLmNvbS9DZXJ0 RW5yb2xsL1N3aXN0Z3JvdXAuY29tKDEpLmNybDASBgkrBgEEAYI3FQEEBQIDAQABMA0GCSqGSIb3 DQEBBQUAA4GBAIHnLSqR7BvyfqeyJPrkNnLEDUiWe9MlWswSCu/jUNx63+tdNZmqnfVUBRLXfPEC kf9QLeJZZsDI2fwq9v/VMROvJFWNTwE6rS/6+uqtSnk90DLqCtfdOp/0BA3nKAfSe7mNHKtqjF6O 2FFdz9nd/1y7Qc99+Dtba4QKXxmygp2nMIIGszCCBhygAwIBAgIKEr0KoQABAAAAijANBgkqhkiG 9w0BAQUFADCB0TEmMCQGCSqGSIb3DQEJARYXc3dpc3QtY2FAc3dpc3Rncm91cC5jb20xCzAJBgNV BAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEqMCgGA1UE ChMhU3dpc3QgQ29tcHV0ZXIgU2VydmljZXMgKFB0eSkgTHRkMSowKAYDVQQLEyFTd2lzdCBDb21w dXRlciBTZXJ2aWNlcyAoUHR5KSBMdGQxFzAVBgNVBAMTDlN3aXN0Z3JvdXAuY29tMB4XDTAyMDEw ODA4MDUxMFoXDTAzMDEwODA4MDUxMFowQDEnMCUGCSqGSIb3DQEJARYYY2xlbWVudHNtQHN3aXN0 Z3JvdXAuY29tMRUwEwYDVQQDEwxNYXggQ2xlbWVudHMwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJ AoGBANaqOS7DkA0OnIq7xvwCdNvTqzZu4VXoJhtHEhHuVwpmaIZOeudDp33GYNcAE7CDWenhm0K9 HePCK6dJ/kkZq/jeN3grktVrAlUh7Yb0hLd/IxatnnFDAzyjMZmo4FaN/4FviOylwYjLiRjoJKJd Xi4xy9XVz5z+gzpNvmMDRlQTAgMBAAGjggQgMIIEHDALBgNVHQ8EBAMCBaAwFwYJKwYBBAGCNxQC BAoeCABVAHMAZQByMB0GA1UdDgQWBBQz4ldBrFqqI2u4Zu8m3eSZ4j0+rTCCAQ8GA1UdIwSCAQYw ggECgBSPoTn2Wzgx2xhACQxyCgXSjJtXPKGB16SB1DCB0TEmMCQGCSqGSIb3DQEJARYXc3dpc3Qt Y2FAc3dpc3Rncm91cC5jb20xCzAJBgNVBAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQ BgNVBAcTCUNhcGUgVG93bjEqMCgGA1UEChMhU3dpc3QgQ29tcHV0ZXIgU2VydmljZXMgKFB0eSkg THRkMSowKAYDVQQLEyFTd2lzdCBDb21wdXRlciBTZXJ2aWNlcyAoUHR5KSBMdGQxFzAVBgNVBAMT DlN3aXN0Z3JvdXAuY29tghBn5Cf5RIylgUK6dalmpg14MIIBGgYDVR0fBIIBETCCAQ0wgcSggcGg gb6GgbtsZGFwOi8vL0NOPVN3aXN0Z3JvdXAuY29tKDEpLENOPXN0ZWluZGMsQ049Q0RQLENOPVB1 YmxpYyUyMEtleSUyMFNlcnZpY2VzLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9c3dp c3Rncm91cCxEQz1jb20/Y2VydGlmaWNhdGVSZXZvY2F0aW9uTGlzdD9iYXNlP29iamVjdGNsYXNz PWNSTERpc3RyaWJ1dGlvblBvaW50MESgQqBAhj5odHRwOi8vc3RlaW5kYy5zd2lzdGdyb3VwLmNv bS9DZXJ0RW5yb2xsL1N3aXN0Z3JvdXAuY29tKDEpLmNybDCCASgGCCsGAQUFBwEBBIIBGjCCARYw gbAGCCsGAQUFBzAChoGjbGRhcDovLy9DTj1Td2lzdGdyb3VwLmNvbSxDTj1BSUEsQ049UHVibGlj JTIwS2V5JTIwU2VydmljZXMsQ049U2VydmljZXMsQ049Q29uZmlndXJhdGlvbixEQz1zd2lzdGdy b3VwLERDPWNvbT9jQUNlcnRpZmljYXRlP2Jhc2U/b2JqZWN0Y2xhc3M9Y2VydGlmaWNhdGlvbkF1 dGhvcml0eTBhBggrBgEFBQcwAoZVaHR0cDovL3N0ZWluZGMuc3dpc3Rncm91cC5jb20vQ2VydEVu cm9sbC9zdGVpbmRjLnN3aXN0Z3JvdXAuY29tX1N3aXN0Z3JvdXAuY29tKDEpLmNydDApBgNVHSUE IjAgBgorBgEEAYI3CgMEBggrBgEFBQcDBAYIKwYBBQUHAwIwTQYDVR0RBEYwRKAoBgorBgEEAYI3 FAIDoBoMGGNsZW1lbnRzbUBzd2lzdGdyb3VwLmNvbYEYY2xlbWVudHNtQHN3aXN0Z3JvdXAuY29t MA0GCSqGSIb3DQEBBQUAA4GBAC5BhZDzpqGK2jvDhzvwAVPwLkTxkoIFoTEoCRlwByzulhjy34CT BggkbpP3TGzYhTRVaBJSWCH6u767Vl3gNAfMDdtLKkUeBgvURm2XvJ7UFbB35IqshdD2qJxKdNNx 3PhxRG91QKk6q4lYYmrNMadbn4kUVUz4wCznh/jlmlTbMYID9TCCA/ECAQEwgZowgZIxCzAJBgNV BAYTAlpBMRUwEwYDVQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEPMA0GA1UE ChMGVGhhd3RlMR0wGwYDVQQLExRDZXJ0aWZpY2F0ZSBTZXJ2aWNlczEoMCYGA1UEAxMfUGVyc29u YWwgRnJlZW1haWwgUlNBIDIwMDAuOC4zMAIDBwygMAkGBSsOAwIaBQCgggKwMBgGCSqGSIb3DQEJ AzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTAyMDUwMzA4MDIzMVowIwYJKoZIhvcNAQkE MRYEFEeTJ6GndA04BnqBzoZdd8PBbCt1MGcGCSqGSIb3DQEJDzFaMFgwCgYIKoZIhvcNAwcwBwYF Kw4DAhowDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIHMA0GCCqGSIb3DQMC AgEoMAoGCCqGSIb3DQIFMIHxBgkrBgEEAYI3EAQxgeMwgeAwgdExJjAkBgkqhkiG9w0BCQEWF3N3 aXN0LWNhQHN3aXN0Z3JvdXAuY29tMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBl MRIwEAYDVQQHEwlDYXBlIFRvd24xKjAoBgNVBAoTIVN3aXN0IENvbXB1dGVyIFNlcnZpY2VzIChQ dHkpIEx0ZDEqMCgGA1UECxMhU3dpc3QgQ29tcHV0ZXIgU2VydmljZXMgKFB0eSkgTHRkMRcwFQYD VQQDEw5Td2lzdGdyb3VwLmNvbQIKEr0KoQABAAAAijCB8wYLKoZIhvcNAQkQAgsxgeOggeAwgdEx JjAkBgkqhkiG9w0BCQEWF3N3aXN0LWNhQHN3aXN0Z3JvdXAuY29tMQswCQYDVQQGEwJaQTEVMBMG A1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xKjAoBgNVBAoTIVN3aXN0IENv bXB1dGVyIFNlcnZpY2VzIChQdHkpIEx0ZDEqMCgGA1UECxMhU3dpc3QgQ29tcHV0ZXIgU2Vydmlj ZXMgKFB0eSkgTHRkMRcwFQYDVQQDEw5Td2lzdGdyb3VwLmNvbQIKEr0KoQABAAAAijANBgkqhkiG 9w0BAQEFAASBgIMNsaompTMFFae+RONS4buzOuN/qiAuTaPFbw/aqESfdUqs/toPKYe2P2VSlzSw /Fo5eBbqtZOuPBSSt+quc1kuNxr4bLnw1g0lP7tn5Rn4TCWUnkl5EJYI0XW99SXitO7Uhf/iwHIf c0kFWocia3zVNa8M75dO+YwYOhkSAPXUAAAAAAAA ------=_NextPart_000_01AC_01C1F289.A3F7EC60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 2: 4:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clientmail.ehsrealtime.com (eris.ehsrealtime.com [213.52.146.130]) by hub.freebsd.org (Postfix) with ESMTP id 45C7137B417 for ; Fri, 3 May 2002 02:04:26 -0700 (PDT) Received: from pan.ehsrealtime.com ([213.52.146.196]) by clientmail.ehsrealtime.com with esmtp (Exim 3.33 #2) id 173YzJ-000P6T-01 for freebsd-questions@freebsd.org; Fri, 03 May 2002 10:04:25 +0100 Received: from localhost.localdomain ([127.0.0.1] helo=pan.ehsbrann.com) by pan.ehsrealtime.com with smtp (Exim 3.35 #1) id 173Yz9-000060-00 for freebsd-questions@freebsd.org; Fri, 03 May 2002 10:04:15 +0100 Date: Fri, 3 May 2002 10:04:14 +0100 From: Byron Schlemmer To: freebsd-questions@freebsd.org Subject: /etc/hosts Message-Id: <20020503100414.2ca1b66d.me@byron.me.uk> X-Mailer: Sylpheed version 0.7.5 (GTK+ 1.2.10; i386-portbld-freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi folks, I'm sure this is a trivial question however I'm struggling to find a definative answer, maybe I'm not looking hard enough. /etc/hosts, does it resolve names to IPs, IPs to names, or both? Does gethostbyname() and gethostbyaddr() both query /etc/hosts? Does it just depend on the application. -- -byron -- "Those who do not understand Unix are condemned to reinvent it, poorly." -- Henry Spencer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 2:39:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dns.perimeter.co.za (dns.perimeter.co.za [196.25.164.254]) by hub.freebsd.org (Postfix) with ESMTP id 4F99437B41E for ; Fri, 3 May 2002 02:39:11 -0700 (PDT) Received: from PATRICK (loopback.mipjhb [209.212.102.245] (may be forged)) by dns.perimeter.co.za (8.11.1/8.11.1) with SMTP id g439d0L36589; Fri, 3 May 2002 11:39:00 +0200 (SAST) (envelope-from bsd@perimeter.co.za) Message-ID: <00cf01c1f286$104d85e0$b50d030a@PATRICK> From: "Patrick O'Reilly" To: "Byron Schlemmer" , References: <20020503100414.2ca1b66d.me@byron.me.uk> Subject: Re: /etc/hosts Date: Fri, 3 May 2002 11:36:54 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Byron Schlemmer" > Hi folks, > > I'm sure this is a trivial question however I'm struggling > to find a definative answer, maybe I'm not looking hard > enough. /etc/hosts, does it resolve names to IPs, IPs to > names, or both? Does gethostbyname() and gethostbyaddr() > both query /etc/hosts? Does it just depend on the > application. Byron, it does both. When/how it is used depends on /etc/host.conf, and sometimes on the application. I would guess that gethostbyname() and gethostbyaddr() will use /etc/hosts depending on how /etc/host.conf is set. But, "applications" like 'host' and 'nslookup' are dns specific, so they will _NOT_ look at /etc/hosts. I speak under correction, but this is my understanding :) Regards, Patrick O'Reilly. ___ _ __ / _ )__ __ (_)_ __ ___ _/ /____ __ / __/ -_) _) / ~ ) -_), ,-/ -_) _) /_/ \__/_//_/_/~/_/\__/ \__/\__/_/ http://www.perimeter.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 3: 2:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from neptune.dbn.stormnet.co.za (neptune.dbn.stormnet.co.za [196.22.196.1]) by hub.freebsd.org (Postfix) with ESMTP id 4174037B417 for ; Fri, 3 May 2002 03:02:37 -0700 (PDT) Received: from postoffice.brabys.co.za ([192.96.48.13] helo=brabys.co.za) by neptune.dbn.stormnet.co.za with esmtp (Exim 3.34 #1) id 173Zvx-0008IF-00 for freebsd-questions@freebsd.org; Fri, 03 May 2002 12:05:02 +0200 Received: from nelis.brabys.co.za (proxy-inner.brabys.co.za [192.96.48.11] (may be forged)) by brabys.co.za (8.12.0/8.12.0) with ESMTP id g43A1kjr020412 for ; Fri, 3 May 2002 12:01:46 +0200 Message-Id: <5.1.0.14.2.20020503115442.0134ae60@192.96.48.11> X-Sender: nelis@192.96.48.11 X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 03 May 2002 12:01:47 +0200 To: freebsd-questions@freebsd.org From: Nelis Lamprecht Subject: weird messages on bootup Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-MailScanner: Found to be clean X-Scanner: exiscan *173Zvx-0008IF-00*lrXCx1igLvE* (STORM GROUP, www.storm.co.za) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Even though my box is running with no problems I have been getting these weird messages on bootup ever since I installed FreeBSD on this machine. Just out of curiosity I'd thought I'd mail the list to see if anybody could tell me what exactly is causing it. Is it just the way FreeBSD probes for devices on startup? They appear almost immediately on boot before all the other normal gunk: config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> en ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config> po ed0 0x300 No such device: ed0 Invalid command or syntax. Type `?' for help. config> ir ed0 10 No such device: ed0 Invalid command or syntax. Type `?' for help. config> iom ed0 0xd8000 No such device: ed0 Invalid command or syntax. Type `?' for help. config> f ed0 0 No such device: ed0 Invalid command or syntax. Type `?' for help. config> q --nelis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 3:35:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by hub.freebsd.org (Postfix) with ESMTP id B2CE837B417 for ; Fri, 3 May 2002 03:35:45 -0700 (PDT) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id g43AZAb24690; Fri, 3 May 2002 13:35:10 +0300 Message-Id: <200205031035.g43AZAb24690@lv.raad.tartu.ee> Received: from SpoolDir by INFO (Mercury 1.48); 3 May 02 13:33:03 +0200 From: "Toomas Aas" Organization: Tartu City Government To: Nelis Lamprecht , freebsd-questions@freebsd.org Date: Fri, 3 May 2002 13:32:56 +0300 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: weird messages on bootup In-reply-to: <5.1.0.14.2.20020503115442.0134ae60@192.96.48.11> X-info: Headers changed by Barricade Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > Even though my box is running with no problems I have been getting these > weird messages on bootup ever since I installed FreeBSD on this machine. > Just out of curiosity I'd thought I'd mail the list to see if anybody could > tell me what exactly is causing it. Is it just the way FreeBSD probes for > devices on startup? They appear almost immediately on boot before all the > other normal gunk: > > config> di sn0 > No such device: sn0 The lines after 'config>' come from file /boot/kernel.conf. They are put there by the visual kernel configuration procedure when you install FreeBSD. They are meant to disable the devices that you chose to disable during the install of FreeBSD. Once you get the system installed and build custom kernel without these devices, FreeBSD can no longer disable the devices because they simply do not exist. This is what it is trying to tell you with 'No such device' messages. You can remove the lines that represent non-existent devices from /boot/kernel.conf or write the following into /boot/loader.conf: userconfig_script_load="NO". -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * Avoid commas, that are not necessary. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 3:36:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from in.ceeyes.com (in.ceeyes.com [65.45.55.133]) by hub.freebsd.org (Postfix) with ESMTP id 5AAEA37B41B for ; Fri, 3 May 2002 03:36:14 -0700 (PDT) Received: (from apache@localhost) by in.ceeyes.com (8.11.0/8.11.2) id g43AUxf16196; Fri, 3 May 2002 03:30:59 -0700 Date: Fri, 3 May 2002 03:30:59 -0700 Message-Id: <200205031030.g43AUxf16196@in.ceeyes.com> From: "GVBSPRASAD" To: questions@FreeBSD.org Subject: Reply me ASAP X-Mailer: NeoMail 1.25 X-IPAddress: 210.214.210.9 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi all, Please give me information about UCD-SNMP traps, as iam implementing SNMP in my application. or else inform me any particular email-ID to contact regarding. Reply me ASAP with regards BHANU PRASAD.G SOFTWARE ENGINEER CS Software Technologies Pvt. ltd., HYDERABAD. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 4: 8:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pegasus.cc.ucf.edu (Pegasus.cc.ucf.edu [132.170.240.30]) by hub.freebsd.org (Postfix) with ESMTP id 38C4337B420 for ; Fri, 3 May 2002 04:08:35 -0700 (PDT) Received: from pegasus.cc.ucf.edu (pegasus.cc.ucf.edu [132.170.240.30]) Ident [dl09847] by pegasus.cc.ucf.edu (Postfix) with ESMTP id 27E553918 for ; Fri, 3 May 2002 07:08:29 -0400 (EDT) Date: Fri, 3 May 2002 07:08:26 -0400 (EDT) From: Douglas Lother To: questions@FreeBSD.org Subject: freebsd with vp6 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Iv been trying to install freebsd 4.5 all night and get a similar problem. It hangs while probing devices but for a few minutes i can still get to the second terminal and see the following message: acd0: READ_TOC command timeout - resetting ata1: resetting devices .. done acd0: read data overrun 12/0 Theses repeat about 5 times before it just freezes. Iv used 2 boot CDs and unpluged everything except my first HD and CD-ROM. (HD1 is on ata0-prim, CDR on ata1-slave) The other 2 slots (ata0-slav, ata1-prim) are both similar HDs. Im not sure if that makes a difference though. I think the problem is with VIA or the IDE controlers and BSD not liking one or the other. Iv read all the FAQs on the main site and been through the docs as well. Iv also searched all over for similar problems and It seems like noone really knows. If you have any suggestions, it would be much appreicated. Thanks in advance, -Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 4:33:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from service.sh.cvut.cz (service.sh.cvut.cz [147.32.127.214]) by hub.freebsd.org (Postfix) with ESMTP id 6B6B037B400 for ; Fri, 3 May 2002 04:33:25 -0700 (PDT) Received: from veverka.sh.cvut.cz (veverka.sh.cvut.cz [147.32.127.216]) by service.sh.cvut.cz (Postfix) with ESMTP id CE9361E745; Fri, 3 May 2002 13:32:52 +0200 (CEST) Received: (from buki@localhost) by veverka.sh.cvut.cz (8.9.3/8.9.2) id NAA35965; Fri, 3 May 2002 13:33:21 +0200 (CEST) (envelope-from buki) Date: Fri, 3 May 2002 13:33:21 +0200 From: Buki To: Shawn Walker Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Remote Upgrade Message-ID: <20020503133321.A29956@veverka.sh.cvut.cz> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from shawn@eblend.org on Thu, May 02, 2002 at 11:54:07PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 11:54:07PM -0400, Shawn Walker wrote: > Hello, > > I currently have a box running 4.1-RELEASE. It is not possible for me > to gain physical access to the box, so I was wondering if it is possible to > upgrade the box remotely. I have looked at the instructions in the handbook > and in /usr/src/UPDATING, but there is some mention of a few steps that > should be completed in single user mode. Is it possible to do this > remotely? works for me just fine, but there is a risk. First make sure noone else is using the box (and possibly interfere with you/make). Than make sure your kernel config has all the devices needed to boot. Than pray and install, mergemaster and reboot :-) Buki > > Thanks, > > -- > Shawn Walker > shawn@eblend.org <-----> http://www.eblend.org/ > > "In rural areas, we're not going to have full coverage until cows talk." > -- Dan Dan Wilinsky, Sprint PCS > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- PGP public key: http://dev.null.cz/buki.asc /"\ \ / ASCII Ribbon Campaign X Against HTML & Outlook Mail / \ http://www.thebackrow.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 4:49:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.bbs.afpa.fr (bbsdtdt.bbs.afpa.fr [212.234.13.130]) by hub.freebsd.org (Postfix) with ESMTP id 80BF737B405 for ; Fri, 3 May 2002 04:49:17 -0700 (PDT) Message-id: Date: Fri, 03 May 2002 12:41:16 +0200 Subject: Fwd: kern compile problem 4.5 X-FC-Form-ID: 141 To: freebsd-questions@freebsd.org From: "pascal barbedor" MIME-Version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi trying this configution file below gives an error at compilation basically i have disabled any ethernet, scsi , laptop line and i have an error at linking kernel stage with usbethersubr.o undefined referernce to etherinput then umass.o undefined reference to cam_simq_alloc and others.. note : building with GENERIC is OK thanks for any clue what I am doing wrong Pascal Barbedor # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $ machine i386 cpu I586_CPU ident OURAL maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs #device de # DEC/Intel DC21x4x (``Tulip'') #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device wx # Intel Gigabit Ethernet Card (``Wiseman'') #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') #device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? port 0x300 # Xircom Ethernet #device xe # PRISM I IEEE 802.11b wireless NIC. #device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback #pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! #pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface device usb # USB Bus (required) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 4:52:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 478ED37B41A for ; Fri, 3 May 2002 04:52:17 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43Bq8U07804; Fri, 3 May 2002 07:52:08 -0400 Message-ID: <3CD27B22.8050601@potentialtech.com> Date: Fri, 03 May 2002 07:57:22 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Charles Pelletier Cc: freebsd-questions@FreeBSD.ORG Subject: Re: freebsd 4.5 failures References: <003801c1f25f$4a45ae20$32040101@hume> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Charles Pelletier wrote: > just a question for the masses.. > why have so many failed 4.5R installations/upgrades occured? i did a clean > install(via ftp) on a P133, ancient Aopen system, had to use a promise UDMA > 66 addon card for my harddrive and only have 24 MB ram on my system so you'd > think that I of all people would have had major problems. But, my system has > been up and running for about a month solid until today (had to reboot post > power outtage). Anyways, just wondering, > --charlie pelletier > --litmus(mp3.com/litmus) How many people send emails to the list saying "I didn't have any problems" compared to the people who have problems asking for help? I doubt if the number of people having problems with 4.5 is any higher than it was at any point in the past, it's just that this list is for helping people, so most of the people that post are having trouble. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 4:54:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id BD9A437B41E for ; Fri, 3 May 2002 04:54:40 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43BsfU07825; Fri, 3 May 2002 07:54:42 -0400 Message-ID: <3CD27BBB.90403@potentialtech.com> Date: Fri, 03 May 2002 07:59:55 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: GVBSPRASAD Cc: questions@FreeBSD.org Subject: Re: Reply me ASAP References: <200205031030.g43AUxf16196@in.ceeyes.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG GVBSPRASAD wrote: > Hi all, > > Please give me information about UCD-SNMP traps, as iam implementing > SNMP in my application. > > or else inform me any particular email-ID to contact regarding. You might want to see if there are any mailing lists for SNMP, as this list is about FreeBSD. And depending on exactly what it is you want to know, there are surely a wealth of books available, as well as the RFCs http://www.cis.ohio-state.edu/cs/Services/rfc/index.html and other web resources. Do a little of your own research. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5: 0: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id BE13437B417 for ; Fri, 3 May 2002 04:59:57 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43BxsU07898; Fri, 3 May 2002 07:59:54 -0400 Message-ID: <3CD27CF3.6050801@potentialtech.com> Date: Fri, 03 May 2002 08:05:07 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Patrick Thomas Cc: freebsd-questions@freebsd.org Subject: Re: confusing CPU stats in `top` References: <20020502160811.P29785-100000@utility.clubscholarship.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Patrick Thomas wrote: > So what is happening here ? > > > last pid: 24283; load averages: 1.71, 2.07, 2.62 > up 97+17:51:18 16:09:59 > 964 processes: 4 running, 956 sleeping, 4 zombie > CPU states: 11.1% user, 0.2% nice, 19.0% system, 0.0% interrupt, 69.7% > idle > Mem: 1289M Active, 234M Inact, 376M Wired, 82M Cache, 199M Buf, 28M Free > Swap: 2018M Total, 6316K Used, 2012M Free > > PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU CPU COMMAND > 92645 88 2 0 42280K 18464K poll 1 238:30 38.82% 38.82% mysqld > 56036 root 2 0 1836K 1316K select 1 21:58 6.84% 6.84% master > 8398 88 2 0 39272K 20700K poll 0 996:14 5.47% 5.47% mysqld > 23617 root 31 0 2968K 2108K CPU1 2 0:01 5.31% 2.54% top > 19435 1006 2 20 48916K 39828K poll 0 35:20 1.12% 1.12% httpd > 93802 500 2 0 64804K 61024K sbwait 1 2:40 0.63% 0.63% httpd > 87873 root 2 0 1596K 1180K select 2 0:01 0.20% 0.20% proftpd > 93750 500 2 0 70352K 66716K accept 1 3:24 0.15% 0.15% httpd > 93751 500 2 0 66396K 62412K accept 0 3:02 0.15% 0.15% httpd > 4965 500 2 0 49084K 45436K sbwait 2 0:02 0.10% 0.10% httpd > 53925 user 38 5 10652K 4960K CPU2 0 7:40 0.05% 0.05% ack > 747 root 2 0 872K 284K poll 2 159:24 0.00% 0.00% httpd > 68955 root 2 0 872K 368K poll 1 148:05 0.00% 0.00% httpd > 96533 72 2 0 13360K 12624K poll 0 29:00 0.00% 0.00% ircd > > > > As you can see, the server reports 69.7% idle > > BUT, that would imply processes using up a total of (30.3 x 4) `top` > reported percent ... which is not the case - if you add up the percentages > in the `top` reported processes, they add up to ~58 or so, and if we > divide that by four we would expect to see 85% idle or so, instead of > 69.7% idle. BUT, your system time is at 19% which means the kernel is busy with something. SMP on Intel systems has a lot of overhead, but this isn't the only reason, crappy disk controllers on older computers will drive up the system processor usage for example. Heck I'd bet that if FreeBSD had winmodem support in the kernel it would drive up the system processor usage. Multi-proc machines require FreeBSD to do a lot of work managing the processors. Apparently, this is much improved in -CURRENT, but it will never go away completely, not on the Intel platform at least. > So why is this exhibiting this behavior, when as I said, if you have a > non-loaded system, and a single process goes to 99%, the overall load is > roughly 74% ?? If you take this math, and figure in the 19% system time, you'll come up with a number very close to what's reported. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5: 1:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id BB4FC37B405 for ; Fri, 3 May 2002 05:01:29 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43C1WU07930; Fri, 3 May 2002 08:01:32 -0400 Message-ID: <3CD27D56.8090607@potentialtech.com> Date: Fri, 03 May 2002 08:06:46 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Ibedalion@aol.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: what file do i need References: <17c.7c8a528.2a033161@aol.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ibedalion@aol.com wrote: > WHAT FILE DO I NEED TO DOWNLOAD FROM A FTP SITE THAT HAS THE FREE BSD > OPERATING SYSTEM IN IT SO I CAN INSTALL IT ON MY COMPUTER I HAVE A PII > 300 96MB MEM HDD 4GB HDD WITH A INTELL MODEM AND TRIDENT VIDEO CARD Follow the instructions below. They'll tell you what files to fetch, as well as exactly what to do with them. http://www.freebsd.org/handbook/install.html -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5: 4:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id E1B6137B400 for ; Fri, 3 May 2002 05:04:54 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43C4rU07953; Fri, 3 May 2002 08:04:53 -0400 Message-ID: <3CD27E1E.4090605@potentialtech.com> Date: Fri, 03 May 2002 08:10:06 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: "Defryn, Guy" Cc: questions@freebsd.org Subject: Re: mysql install problem References: <98B01D2717B9D411B38F0008C7840931057F37F9@its-xchg2.massey.ac.nz> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG If you reply to the list as well as me, others can answer your question if I'm unavailable or don't know the answer. Defryn, Guy wrote: > Thanks Bill, > > I think I have downloaded a binary file and I am trying to install it > as a source file. I am rather new to unix. I suggest reading the section on ports/packages in the handbook. It's on the FreeBSD web site, but it's also on your local FreeBSD system if you installed the docs. > I have a few temporary directories now with all the mysql files. > Is there an easy way of deleting this? I cannot seem to delete > the directory in one go rm -r /the/dir/name But I think others already answered this for you. > When I use /stand/sysinstall I can only see the mysql-client package. > I believe I need the server one. I can't use the ports because I don't > have internet connection for that machine. Then grab the .tgz file and use pkg_add to install it. Read the handbook, and the man page for pkg_add. Once you know the system, it's actually very simple. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:14:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lerlaptop.lerctr.org (lerlaptop.lerctr.org [207.158.72.14]) by hub.freebsd.org (Postfix) with ESMTP id B7ABD37B417 for ; Fri, 3 May 2002 05:14:33 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by lerlaptop.lerctr.org (8.12.3/8.12.3) with ESMTP id g43CEWlM000370; Fri, 3 May 2002 07:14:33 -0500 (CDT) (envelope-from ler@lerctr.org) Subject: Re: XFree86-4 port install problems... From: Larry Rosenman To: Max Clements Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 07:14:32 -0500 Message-Id: <1020428073.324.0.camel@lerlaptop> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 03:02, Max Clements wrote: > Hi There, > > Hope this has not been asked before, but I am trying to install > XFree86-4 from the ports on a FreeBSD 4.6 pre-release system. The ports > are up to date, yet the compile fails after downloading the first source > file, and what appears to be while it is making imake. > > I have included some compiler output below... > > Any comments would be appreciated... > > Regards > rm -rf /usr/X11R6 or FORCE INSTALL the Imake-4 port. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: ler@lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:19:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.riic.uni-linz.ac.at (mail.riic.uni-linz.ac.at [140.78.161.130]) by hub.freebsd.org (Postfix) with ESMTP id EA38237B404 for ; Fri, 3 May 2002 05:19:16 -0700 (PDT) Received: from hawkings.riic.uni-linz.ac.at (hawkings.riic.uni-linz.ac.at [140.78.161.239]) by mail.riic.uni-linz.ac.at (8.9.3/8.9.3) with ESMTP id NAA21593; Fri, 3 May 2002 13:53:06 +0200 Message-Id: <5.1.0.14.0.20020503135200.02748130@postoffice.riic.at> X-Sender: hueber@postoffice.riic.at X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Fri, 03 May 2002 13:53:42 +0200 To: Loren Koss , Moti Levy From: Gernot Hueber Subject: Re: poptop problem.. Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: References: <001801c1f24f$b304d0e0$6400a8c0@yafa> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think it is a problem of your bundle name in mpd.links "pptp" Whereas in mpd.conf you want to open a bundle "pptp0" (with zero). HTH Gernot At 20:24 02.05.2002 -0700, Loren Koss wrote: >Yeah, I figured that after looking through the LINT config file.. I'm >rebuilding the world and the kernel right now so I'll let you know if that >works.. They should really add that to the docs, dont ya think? > >Thanks for all your help! >Loren > >On Thu, 2 May 2002, Moti Levy wrote: > >> if i'm not mistaken you need to compile NETGRAPH support into your kernel >> ( just the NETGRAPH ) >>=20 >> Moti >> ----- Original Message ----- >> From: "Loren Koss" >> To: "Moti" >> Cc: >> Sent: Thursday, May 02, 2002 9:27 PM >> Subject: Re: poptop problem.. >>=20 >>=20 >> > Yeah, I'm using FreeBSD.. Okay, i've installed mpd-netgraph, but I get >> > this when I start it: >> > >> > Multi-link PPP for FreeBSD, by Archie L. Cobbs. >> > Based on iij-ppp, by Toshiharu OHNO. >> > mpd: pid 63798, version 3.3 (root@unix.pciway.com 18:16 2-May-2002) >> > [pptp] ppp node is "mpd63798-pptp" >> > [pptp] can't connect iface and inet: File exists >> > [pptp] netgraph initialization failed >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > mpd: no bundles defined >> > >> > Here is my mpd.conf file: >> > >> > default: >> > load pptp >> > pptp: >> > new -i ng0 pptp pptp >> > set iface disable on-demand >> > #set iface enable proxy-arp >> > set bundle disable multilink >> > set link yes acfcomp protocomp >> > set link no pap chap >> > set link enable chap >> > set link keep-alive 60 180 >> > set ipcp yes vjcomp >> > set ipcp ranges 10.10.50.201/32 10.10.50.210/32 >> > set ipcp dns 10.10.50.1 >> > set ipcp nbns 10.10.50.1 >> > >> > set bundle enable compression >> > set ccp yes mppc >> > #set ccp yes mpp-e40 >> > set ccp no mpp-e40 >> > set ccp yes mpp-e128 >> > set ccp yes mpp-stateless >> > set bundle yes crypt-reqd >> > >> > and mpd.links: >> > >> > pptp0: >> > set link type pptp >> > set pptp self 10.10.50.200 >> > set pptp enable incoming >> > set pptp disable originate >> > >> > What else do I have to do?? The instructions are not as concrete as it >> > would seem.. >> > >> > Thanks for your help! >> > >> > Loren >> > >> > On Thu, 2 May 2002, Moti wrote: >> > >> > > this is a freebsd list so i'll presume you're using freebsd . >> > > if i'm correct than take poptop and through out the windows ... >> > > use mpd netgraph as a pptp server . >> > > here's the link you need : >> > > http://www.itga.com.au/~gnb/vpn/pptp-serv.html >> > > it's simple robust and works like a charmmmmmmmmmm >> > > moti >> > > ----- Original Message ----- >> > > From: "Loren Koss" >> > > To: >> > > Sent: Thursday, May 02, 2002 5:38 PM >> > > Subject: poptop problem.. >> > > >> > > >> > > > I know there is a mailing list for poptop but it doesn't look like >> anyone >> > > > responds.. I don't want to waste bandwidth on this list >> unnecessarily, so >> > > > if anyone has any experience with this app, could you please email= me >> as I >> > > > am having some difficulty with it and really want to get it= working. >> > > > >> > > > Thanks >> > > > Loren >> > > > >> > > > >> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org >> > > > with "unsubscribe freebsd-questions" in the body of the message >> > > > >> > > > >> > > >> > >> > >> > >>=20 > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message Dipl.-Ing. Gernot Hueber Institut f=FCr Integrierte Schaltungen Freist=E4dter Strasse 315/2 A-4040 Linz Tel: +43 732 2468-7118, Fax: -7126 E-mail: hueber@riic.at To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:24: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id AF17A37B419 for ; Fri, 3 May 2002 05:23:55 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43CNuU08259; Fri, 3 May 2002 08:23:57 -0400 Message-ID: <3CD28296.10201@potentialtech.com> Date: Fri, 03 May 2002 08:29:10 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Budec Cc: questions@freebsd.org Subject: Re: Networking Buffers References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Budec wrote: > I am currently running FreeBSD i386 4.5 Stable and having some network > issuses. > > The machine is a 300 Mhz, AMD K6-2 with 512 meg ram and 2 intel ether net > pro nicks. > Has dual 100 Gig WD IDE drives, and one 4 gig samsung HD. > > The main purpose of this box is for firewall between networks and file > server. > > The network traffic on it is quite high, it currently rsyncs/robocopies to 4 > other servers > on the same network over a 100mb connection though smb/nfs and currently > routes all traffic between > 2 network, each with 10+ workstation that require a high amount of bandwidth > (real time network application + vnc sessions + file copies). > The box seems to keep up fine without network delays, but sometimes one of > the nics just freezes. > > The issuse I am having on it, is it seems I am "blowing out" one of the > nics. > I am sure this FreeBSD related, because this box use to run W2K with a > higher > network load and didn't expeirence any issuses. > > After a high spike it network load (when we backup all data in the middle of > the night) one > of the ip address will stop responding. I log in locally and the network > tables are fine, but > when I try to ping out of that network card it gives the error message > "ping: no buffers avaiable" Have you checked the output of "netstat -m" at this point? I was having weird problems with this kind of thing when using vtund to create an encrypted tunnel over a wireless WAN link. The problem went away when we improved the reliability of the wireless. I tend to suspect that the problem was that a lot of connections were getting dropped or boogered up due to lost packets, and that the buffer space was getting used up maintaining these hung connections. Turning on net.inet.tcp.always_keepalive my have solved this ... > Taking the nic up then back down (`ifconfig fxp0 down; ifconfig fxp0 up`) > will fix the issuse, but > is a huge problem because it is very distrubating to network operation, > espically during nightly > backups/data merges when no one is onsite. I replaced the nic with a brand > new one that is the same > model, and also with a new one that is a differant brand/model and it is > still having issuses. Not a solution, but as a workaround I made a cron job that would regularly do "ifconfig fxp0 down;ifconfig fxp0 up" just to ensure the thing wasn't frozen. As dangerous as this sounds, we experienced very few problems with it. An even better idea (until you find the proper solution) is the icmpmonitor port, which will monitor your network connectivity and execute commands for you when it fails. You could configure it to down/up the interface when the connectivity goes down. These are just workarounds, you need to find out what the problem is and fix it right. But, since you seem to be under fire, these should take the heat off you while you figure out the right solution. > In sysctl I changed (IIRC) "net.inet.tcp.sendspace" and "net.inet.recvspace" > both to 8192 (thinking it is Kb?), > that still had issuses, so I change it to 8192000 (thinking it might be > bytes) and also tried 8192000000. > All these settings still cause FreeBSD to drop the nic. What is the size of > these variables? (ie. mb, kb, etc ?) Read "man tuning" In addition to answering your question here, there are other options explained in this doc that may help you. > Also is there any type of intelligent networking buffering in FreeBSD? > Something that would > say "If network buffers are full, pause network traffic, flush buffers, > continue with network > traffic" ? How do you do that? If a number of connection are hung, which ones do you flush? Is it better to drop a long idle connection than to drop a new connection? Turn on net.inet.tcp.always_keepalive, that should ensure that you don't get idle connections hanging around too long. kern.ipc.somaxconn may help as well. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:35:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 662F237B416 for ; Fri, 3 May 2002 05:35:09 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43CbcE01531 for ; Fri, 3 May 2002 14:37:38 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43CbcU01527 for ; Fri, 3 May 2002 14:37:38 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43CZ7Q12268 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 14:35:07 +0200 Date: Fri, 3 May 2002 14:35:07 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Message-ID: <20020503143507.A12026@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <02050211025001.04136@fcoffice.ptfd.org> <02050215351700.04429@fcoffice.ptfd.org> <20020502201301.9467B37B449@hub.freebsd.org> <02050218003804.04429@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <02050218003804.04429@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 06:00:38PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 18:00, Michael W.Holdeman spoke: > Everything in /sbin is -r-xr-xr-x > ? Everything? (ls -l /sbin | grep -v r-xr-xr-x) On my installation ccdconfig, init, ping, ping6, route and shutdown have a different file permission. But I don't think they are required to build a new kernel. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:38: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp08.wxs.nl (smtp08.wxs.nl [195.121.6.40]) by hub.freebsd.org (Postfix) with ESMTP id 2B32837B41E for ; Fri, 3 May 2002 05:37:46 -0700 (PDT) Received: from pluto ([80.60.44.125]) by smtp08.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVJCEU01.M3I for ; Fri, 3 May 2002 14:37:42 +0200 From: "J.J.Rijpkema" To: Subject: X11 Problem Date: Fri, 3 May 2002 14:37:41 +0200 Message-ID: <000001c1f29f$5199f290$9600000a@pluto> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0001_01C1F2B0.1522C290" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C1F2B0.1522C290 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, I am a Newbie to BSD and I have a problem configuring the X11. First I installed FreeBSD without any problem, but when I want to configure X11, I constantly get the message that the X Server can't start. I have read the chapter about Configuring X, it says that (a different way than using /stand/sysinstall) you can configure X if you type XFree86 -configure, it than makes a new XF86Config.new file to edit. But when I do this, my monitor goes black and than turns off for about 10 sec. and than it switches on again, but than I can't see anything it just turns on. After I reboot (with ctrl+alt+del or the power button), I do have the file XF86Config.new that should be created, nothing wrong about that, but I still can't start X with startx because than I get the same thing as when I create the XF86Config.new file. I have a Intel 810e chipset, and I have read that XFree86 4.X supports these chips. I also read that if you want to configure the XF86Config file for these chips that you have to load the agp.ko module into the kernel to use agpgart I have done this by adding the line agp_load="YES" to the /boot/loader.conf file, they said it than loads the module at booting. I also created the AGP device node in the /dev directory with sh MAKEDEV agpgart, but with all these changes, I still can't configure or get the X server starting. I don't know if I am doing something wrong or missing something, but when I do I hope you guys can help me with this, because for so far I like BSD and would like to learn much more of it. Greetings J.J. Rijpkema ------=_NextPart_000_0001_01C1F2B0.1522C290 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hello,

 

I am a Newbie to BSD and I have a problem configuring = the X11.

First I installed FreeBSD without any problem, but = when I want to configure X11, I constantly get the message that the X Server can’t start.

I have read the chapter about Configuring X, it says = that (a different way than using /stand/sysinstall) you can configure X if you = type

XFree86 = –configure, it than makes a new XF86Config.new file to = edit.

But when I do this, my monitor goes black and than = turns off for about 10 sec. and than it switches on again, but than I can’t = see anything

it just turns on.

After I reboot (with = ctrl+alt+del or the power button), I do have the file XF86Config.new that should be created, = nothing wrong about that, but I

still can’t start X with startx because than I get the same thing as when I create the XF86Config.new = file.

 

I have a Intel 810e chipset, and I have read that = XFree86 4.X supports these chips.

I also read that if you want to configure the XF86Config file for these chips that you have to load = the agp.ko module into the kernel to use agpgart=

I have done this by adding the line agp_load=3D”= YES” to the /boot/loader.conf<= /span> file, they said it than loads the module at = booting.

I also created the AGP device node = in the /dev directory with sh MAKEDEV agpgart, but with all these changes, I = still can’t configure or get the X

server starting.

 

I don’t know if I am doing something wrong or = missing something, but when I do I hope you guys can help me with this, because = for so far I like BSD

and would like to learn much more of it. =

 

Greetings

J.J. Rijpkema

 

------=_NextPart_000_0001_01C1F2B0.1522C290-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:38:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from goose.prod.itd.earthlink.net (goose.mail.pas.earthlink.net [207.217.120.18]) by hub.freebsd.org (Postfix) with ESMTP id 0BA0137B41C for ; Fri, 3 May 2002 05:38:49 -0700 (PDT) Received: from user-119aekg.biz.mindspring.com ([66.149.58.144] helo=ns.flncs.com) by goose.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173cKj-0001oX-00; Fri, 03 May 2002 05:38:45 -0700 Received: from backup (unknown [157.238.90.22]) by ns.flncs.com (Postfix) with SMTP id B33D155AB; Fri, 3 May 2002 08:42:09 -0400 (EDT) Message-ID: <005c01c1f29f$56afd3d0$bf01010a@backup> From: "Moti" To: "Defryn, Guy" , "'freebsd-questions@FreeBSD.ORG'" References: <98B01D2717B9D411B38F0008C7840931057F3803@its-xchg2.massey.ac.nz> Subject: Re: How do I delete directories and subdirectories at once Date: Fri, 3 May 2002 08:37:50 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG you can do that but remember the force is stronger on the dark side ... rm -r will delete recuresvly BEWARE BEWARE BEWARE this is one of unix's most dangarous commands ... BEWARE BEWARE BEWARE moti ----- Original Message ----- From: "Defryn, Guy" To: "'freebsd-questions@FreeBSD.ORG'" Sent: Friday, May 03, 2002 12:18 AM Subject: How do I delete directories and subdirectories at once > > > This is probably a silly question but I cannot figure out how to delete directories, subdirectories and all files in one go. > > Thanks > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:40:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id D472737B41C for ; Fri, 3 May 2002 05:40:36 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43CecU08432; Fri, 3 May 2002 08:40:38 -0400 Message-ID: <3CD28680.5060108@potentialtech.com> Date: Fri, 03 May 2002 08:45:52 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Korey Pelton Cc: questions@freebsd.org Subject: Re: I cannot access some websites References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Korey Pelton wrote: > Hello, > > I apologize for cross-posting this, but I haven't recieved a reply from > -questions yet, Probably because this is an unusual problem. > and I need to get this fixed for my job or I will have > to switch to Windows. Heaven forbid. > I was running 4.4-release for a long time, and I could access any > website on the internet. Then, I decided to upgrade to 4.5-release and > now I cannot access certain websites, some of which include > www.apache.org and www.bn.com. However, I can access other websites > such as www.yahoo.com, www.freebsd.org, and www.altavista.com. I have > tried to find a pattern in the IP addresses, and there is no pattern. How about a pattern in the routing, or the HTTP request, or the HTTP reply, or the TCP packets returned? Don't look for patterns like that, you'll probably drive yourself nuts. > What seems so strange is that I can successfully ping ANY website on the > internet from my machine. Good, that means your routing and DNS and TCP stack are configured properly. > When pointing the Lynx browser to > http://www.apache.org, it says "Looking up www.apache.org" for about 1/2 > second and then it says "Making http connection" for about 2 minutes and > then it says "cannot connect!" and then it stops. And, yes, I can > successfully ping apache.org. I also tried using Opera and had the same > results as with Lynx. Do you use a proxy server? > I have read the ppp chapter in the handbook about 8 or 9 times just > trying to find a clue to whatever I am doing wrong. Last night, I did a > cvsup and then a buildworld, buildkernel, installkernel, and > installworld, and I still get the same results. However, today, I > believe I can access a few websites that I couldn't access yesterday, > but then again, that could be my mind playing tricks on me. I still > cannot access a lot of websites. I am using the same ISP that I used > before and that I use in windows, and I only have this problem with this > upgraded machine. Does your ISP use a proxy, or transparent proxy? That's a possible point of trouble. Download ethereal or use tcpdump and see what difference there is between the sites that work and those that don't. Try using telnet to connect to the problem sites (use "telnet site.name http") and see if anything looks funky. If you don't understand the output of ethereal or telnet, post the relevent details to the list so folks have enough information to diagnose your problem a little better. > Anyway, I am willing to send anyone my kernel config file, ppp.conf, or > any other file that might be helpful in solving this problem. Thank you > all and I look forward to any reply. Send the output of some experiments, but try to snip it intelligently. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:54:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 045DE37B404 for ; Fri, 3 May 2002 05:54:45 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43CvEW01994 for ; Fri, 3 May 2002 14:57:14 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43CvEU01990 for ; Fri, 3 May 2002 14:57:14 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43CshM12602 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 14:54:43 +0200 Date: Fri, 3 May 2002 14:54:43 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel compile fails 4.5R Message-ID: <20020503145443.B12026@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <02050211025001.04136@fcoffice.ptfd.org> <02050215351700.04429@fcoffice.ptfd.org> <20020502201301.9467B37B449@hub.freebsd.org> <02050217570103.04429@fcoffice.ptfd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <02050217570103.04429@fcoffice.ptfd.org>; from ptfd9100@beanstalk.net on Thu, May 02, 2002 at 05:57:01PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 17:57, Michael W.Holdeman spoke: > OK changed tyhe /sbin/dmersg to executable by root. I noticed alot of other > files are not in /sbin. I wonder if this is my problem. I'll post the dmesg Not every program that's needed to build a new kernel is located in /sbin. Some are in /usr/bin (gcc, make). Just dmesg is located in /sbin. Sometimes unprivileged users don't include /sbin and /usr/sbin in their PATH. Then they have to explicitly call these commands with their directory prefixed. (/sbin/dmesg, /sbin/ping) > as soon as I figure out how to send dmesg to a text file so I can get it and > mail it. /sbin/dmesg > /tmp/dmesg.txt > however the only thing I see there that looks out of the ordinary is some > time-outs on ata1, which is only the cdrom drive. OK, timeouts on the cdrom drive are probably not the problem. It doesn't mean that you will find the problem in `dmesg` or /var/log/messages. Just maybe. > I just wonder how the permissions on this machine could have gotten dorked? Not easy to guess. Have they really been changed? Maybe somebody has sniffed the root password on your network? Are you working on the console or do you connect by some encrypted means? (openssh, ipsec) -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:54:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ipsnetwork.net (mail.ipsnetwork.net [209.202.83.5]) by hub.freebsd.org (Postfix) with ESMTP id 887D937B41C for ; Fri, 3 May 2002 05:54:53 -0700 (PDT) Received: (from apache@localhost) by mail.ipsnetwork.net (8.11.1/8.11.1) id g43Csrx16990; Fri, 3 May 2002 08:54:53 -0400 (EDT) Date: Fri, 3 May 2002 08:54:53 -0400 (EDT) Message-Id: <200205031254.g43Csrx16990@mail.ipsnetwork.net> From: "Nathan Vidican" <> To: questions@freebsd.org Reply-To: nathan@vidican.com Subject: anyone know how to change the logformat for squid, (want a date/time field) X-Mailer: NeoMail 1.24 X-IPAddress: 216.94.6.27 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have been using a simple PERL script to go through the squid log file, and output what a specified user has requested... a bit messy as it shows every item, (image, html, cookie, etc), but it works. Now, the administration wants not only to know what a particular user has seen, but also when they saw it. So I need to figure out how to put a date/time field into the logfile. (if one in some cryptic way doesn't already exist?) Any ideas? -- Nathan Vidican Nathan@Vidican.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 5:57:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sage-one.net (adsl-65-71-135-137.dsl.crchtx.swbell.net [65.71.135.137]) by hub.freebsd.org (Postfix) with ESMTP id 8B79337B400 for ; Fri, 3 May 2002 05:57:24 -0700 (PDT) Received: from SAGEONE (sageone [192.168.0.5]) by sage-one.net (8.11.6/8.11.6) with SMTP id g43CvHA82228; Fri, 3 May 2002 07:57:17 -0500 (CDT) (envelope-from jack@sage-one.net) Message-Id: <3.0.5.32.20020503075715.017c6848@mail.sage-one.net> X-Sender: jack@mail.sage-one.net X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Fri, 03 May 2002 07:57:15 -0500 To: Bill Moran , Charles Pelletier From: "Jack L. Stone" Subject: Re: freebsd 4.5 failures Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <3CD27B22.8050601@potentialtech.com> References: <003801c1f25f$4a45ae20$32040101@hume> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 07:57 AM 5.3.2002 -0400, Bill Moran wrote: >Charles Pelletier wrote: >> just a question for the masses.. >> why have so many failed 4.5R installations/upgrades occured? i did a clean >> install(via ftp) on a P133, ancient Aopen system, had to use a promise UDMA >> 66 addon card for my harddrive and only have 24 MB ram on my system so you'd >> think that I of all people would have had major problems. But, my system has >> been up and running for about a month solid until today (had to reboot post >> power outtage). Anyways, just wondering, >> --charlie pelletier >> --litmus(mp3.com/litmus) > >How many people send emails to the list saying "I didn't have any problems" >compared to the people who have problems asking for help? > >I doubt if the number of people having problems with 4.5 is any higher than >it was at any point in the past, it's just that this list is for helping >people, so most of the people that post are having trouble. > >-- >Bill Moran >Potential Technology >http://www.potentialtech.com > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > For my observation, the basic system change from sendmail 8.11 to the sendmail 8.12 caused the most problems, regardless of whether it was supposedly "documented" that folks should be aware to add the new users before running installworld, which stops because it doesn't see smmsp:*:25: and mailnull:*:26:. The method to work around this wasn't very clear to some.... .... our website: http://www.sage-one.net/ Best regards, Jack L. Stone Server Admin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6: 0:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id E82F437B41B for ; Fri, 3 May 2002 06:00:39 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43D39u02131 for ; Fri, 3 May 2002 15:03:09 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43D39U02127 for ; Fri, 3 May 2002 15:03:09 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43D0dd12758 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 15:00:39 +0200 Date: Fri, 3 May 2002 15:00:38 +0200 From: Hanspeter Roth To: FreeBSD Questions Subject: Re: Kernel compile fails 4.5R Message-ID: <20020503150038.C12026@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: FreeBSD Questions References: <02050211025001.04136@fcoffice.ptfd.org> <20020502183034.A44683@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20020502183034.A44683@xor.obsecurity.org>; from kris@obsecurity.org on Thu, May 02, 2002 at 06:30:34PM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 18:30, Kris Kennaway spoke: > On Thu, May 02, 2002 at 11:02:50AM -0400, Michael W.Holdeman wrote: > > > make ( always fails, different messages EACH time. Sometimes talkling about > > white spaces in files?, other times talking about invalid pipes, or kernel > > panics?) > > This is a dead giveaway that you have malfunctioning hardware. > > CPU cooling and bad RAM are the two main causes, but it could also > be other problems. Michael: you might try to underclock the CPU -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6: 3:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cactus.fi.uba.ar (cactus.fi.uba.ar [157.92.49.108]) by hub.freebsd.org (Postfix) with ESMTP id C405F37B400 for ; Fri, 3 May 2002 06:03:41 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by cactus.fi.uba.ar (8.11.6/8.11.6) with ESMTP id g43D0vL01551; Fri, 3 May 2002 10:00:58 -0300 (ART) (envelope-from fgleiser@cactus.fi.uba.ar) Date: Fri, 3 May 2002 10:00:57 -0300 (ART) From: Fernando Gleiser X-X-Sender: To: Cc: Subject: Re: anyone know how to change the logformat for squid, (want a date/time field) In-Reply-To: <200205031254.g43Csrx16990@mail.ipsnetwork.net> Message-ID: <20020503095737.Q99219-100000@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 3 May 2002, it was written: > I have been using a simple PERL script to go through the squid log > file, and output what a specified user has requested... a bit messy as > it shows every item, (image, html, cookie, etc), but it works. > > Now, the administration wants not only to know what a particular user > has seen, but also when they saw it. So I need to figure out how to put > a date/time field into the logfile. (if one in some cryptic way doesn't > already exist?) Any ideas? The first entry is the time/date in unix internal format. look at http://www.squid-cache.org/Doc/FAQ/FAQ-6.html for detailed info about squid log files format. Fer > > -- > Nathan Vidican > Nathan@Vidican.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6: 7: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id 84F5C37B419 for ; Fri, 3 May 2002 06:07:03 -0700 (PDT) Received: from pcmarpxy.tninet.se (bb-62-5-36-29.bb.tninet.se [62.5.36.29]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 971344.431161.1020.1s6706824sheridan ; Fri, 03 May 2002 15:06:01 +0200 Content-Type: text/plain; charset="iso-8859-1" From: Mark Rowlands To: Korey Pelton Subject: Re: I cannot access some websites Date: Fri, 3 May 2002 15:06:58 +0200 X-Mailer: KMail [version 1.4] Cc: questions@FreeBSD.ORG References: <3CD28680.5060108@potentialtech.com> In-Reply-To: <3CD28680.5060108@potentialtech.com> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200205031506.58223.mark.rowlands@minmail.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday 03 May 2002 2:45 pm, Bill Moran wrote: > Korey Pelton wrote: > > Hello, > > > > I apologize for cross-posting this, but I haven't recieved a reply fr= om > > -questions yet, > > Probably because this is an unusual problem. > > > and I need to get this fixed for my job or I will have > > to switch to Windows. > > Heaven forbid. > > > I was running 4.4-release for a long time, and I could access any > > website on the internet. Then, I decided to upgrade to 4.5-release a= nd > > now I cannot access certain websites, some of which include > > www.apache.org and www.bn.com. However, I can access other websites > > such as www.yahoo.com, www.freebsd.org, and www.altavista.com. I hav= e > > tried to find a pattern in the IP addresses, and there is no pattern. > > How about a pattern in the routing, or the HTTP request, or the HTTP > reply, or the TCP packets returned? > Don't look for patterns like that, you'll probably drive yourself nuts. > > > What seems so strange is that I can successfully ping ANY website on = the > > internet from my machine. > > Good, that means your routing and DNS and TCP stack are configured > properly. > > > When pointing the Lynx browser to > > http://www.apache.org, it says "Looking up www.apache.org" for about = 1/2 > > second and then it says "Making http connection" for about 2 minutes = and > > then it says "cannot connect!" and then it stops. And, yes, I can > > successfully ping apache.org. I also tried using Opera and had the s= ame > > results as with Lynx. > > Do you use a proxy server? > > > I have read the ppp chapter in the handbook about 8 or 9 times just > > trying to find a clue to whatever I am doing wrong. Last night, I di= d a > > cvsup and then a buildworld, buildkernel, installkernel, and > > installworld, and I still get the same results. However, today, I > > believe I can access a few websites that I couldn't access yesterday, > > but then again, that could be my mind playing tricks on me. I still > > cannot access a lot of websites. I am using the same ISP that I used > > before and that I use in windows, and I only have this problem with t= his > > upgraded machine. > > Does your ISP use a proxy, or transparent proxy? That's a possible poi= nt > of trouble. > Download ethereal or use tcpdump and see what difference there is betwe= en > the sites that work and those that don't. > Try using telnet to connect to the problem sites (use "telnet site.name > http") and see if anything looks funky. If you don't understand the ou= tput > of ethereal or telnet, post the relevent details to the list so folks h= ave > enough information to diagnose your problem a little better. > > > Anyway, I am willing to send anyone my kernel config file, ppp.conf, = or > > any other file that might be helpful in solving this problem. Thank = you > > all and I look forward to any reply. > > Send the output of some experiments,=20 > but try to snip it intelligently. Thats what we used to say to the mohel. You mentioned PPP......are you running through an adsl link with nat /=20 ipfilter or ipfw perchance...... might want to check those logs too. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6:30:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 1976E37B41D for ; Fri, 3 May 2002 06:30:20 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id GAA21610; Fri, 3 May 2002 06:30:17 -0700 Message-ID: <3CD290E9.3000801@owt.com> Date: Fri, 03 May 2002 06:30:17 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: "J.J.Rijpkema" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: X11 Problem References: <000001c1f29f$5199f290$9600000a@pluto> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG J.J.Rijpkema wrote: > Hello, > > > > I am a Newbie to BSD and I have a problem configuring the X11. > > First I installed FreeBSD without any problem, but when I want to > configure X11, I constantly get the message that the X Server can?t start. > > I have read the chapter about Configuring X, it says that (a different > way than using /stand/sysinstall) you can configure X if you type > > XFree86 ?configure, it than makes a new XF86Config.new file to edit. > > But when I do this, my monitor goes black and than turns off for about > 10 sec. and than it switches on again, but than I can?t see anything > > it just turns on. > > After I reboot (with ctrl+alt+del or the power button), I do have the > file XF86Config.new that should be created, nothing wrong about that, but I > > still can?t start X with startx because than I get the same thing as > when I create the XF86Config.new file. I had problems getting KDE to start up after installing 4.2. What I found was that you needed to get rid of /etc/XF86Config. It is for XFree86-3.3.6. Then, I had to run "xf86cfg to finish the configuration. The new XF86Config is located in /usr/X11R6/lib/X11. Kent > > > > I have a Intel 810e chipset, and I have read that XFree86 4.X supports > these chips. > > I also read that if you want to configure the XF86Config file for these > chips that you have to load the agp.ko module into the kernel to use agpgart > > I have done this by adding the line agp_load=?YES? to the > /boot/loader.conf file, they said it than loads the module at booting. > > I also created the AGP device node in the /dev directory with sh MAKEDEV > agpgart, but with all these changes, I still can?t configure or get the X > > server starting. > > > > I don?t know if I am doing something wrong or missing something, but > when I do I hope you guys can help me with this, because for so far I > like BSD > > and would like to learn much more of it. > > > > Greetings > > J.J. Rijpkema > > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6:32:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 2F90537B425 for ; Fri, 3 May 2002 06:32:42 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43DWZU09037; Fri, 3 May 2002 09:32:35 -0400 Message-ID: <3CD292AD.1000104@potentialtech.com> Date: Fri, 03 May 2002 09:37:49 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: nathan@vidican.com Cc: questions@freebsd.org Subject: Re: anyone know how to change the logformat for squid, (want a date/time field) References: <200205031254.g43Csrx16990@mail.ipsnetwork.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Nathan Vidican wrote: > I have been using a simple PERL script to go through the squid log > file, and output what a specified user has requested... a bit messy as > it shows every item, (image, html, cookie, etc), but it works. > > Now, the administration wants not only to know what a particular user > has seen, but also when they saw it. So I need to figure out how to put > a date/time field into the logfile. (if one in some cryptic way doesn't > already exist?) Any ideas? Have you looked at Calamari? I haven't used it, but it's a log analyzer for Squid, and might be helpful. -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 6:36:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail6.nc.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id A43E937B422 for ; Fri, 3 May 2002 06:36:03 -0700 (PDT) Received: from i8k.babbleon.org ([66.57.86.84]) by mail6.nc.rr.com with Microsoft SMTPSVC(5.5.1877.757.75); Fri, 3 May 2002 09:36:03 -0400 Received: by i8k.babbleon.org (Postfix, from userid 111) id D2407BB29; Fri, 3 May 2002 09:36:01 -0400 (EDT) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: Kent Stewart , "J.J.Rijpkema" Subject: Re: X11 Problem Date: Fri, 3 May 2002 09:36:01 -0400 X-Mailer: KMail [version 1.3] Cc: freebsd-questions@FreeBSD.ORG References: <000001c1f29f$5199f290$9600000a@pluto> <3CD290E9.3000801@owt.com> In-Reply-To: <3CD290E9.3000801@owt.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020503133601.D2407BB29@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Another possible approach is to scour the net for working XF86Configs for your video card. This works particularly well if you have a laptop, and the the -configure works particularly poor there. The "Linux for laptops" page is great for this. FreeBSD is not, of course, Linux, but it runs the same X. On Friday 03 May 2002 09:30 am, Kent Stewart wrote: | J.J.Rijpkema wrote: | > Hello, | > | > | > | > I am a Newbie to BSD and I have a problem configuring the X11. | > | > First I installed FreeBSD without any problem, but when I want to | > configure X11, I constantly get the message that the X Server can?t | > start. | > | > I have read the chapter about Configuring X, it says that (a different | > way than using /stand/sysinstall) you can configure X if you type | > | > XFree86 ?configure, it than makes a new XF86Config.new file to edit. | > | > But when I do this, my monitor goes black and than turns off for about | > 10 sec. and than it switches on again, but than I can?t see anything | > | > it just turns on. | > | > After I reboot (with ctrl+alt+del or the power button), I do have the | > file XF86Config.new that should be created, nothing wrong about that, but | > I | > | > still can?t start X with startx because than I get the same thing as | > when I create the XF86Config.new file. | | I had problems getting KDE to start up after installing 4.2. What I | found was that you needed to get rid of /etc/XF86Config. It is for | XFree86-3.3.6. Then, I had to run "xf86cfg to finish the | configuration. The new XF86Config is located in /usr/X11R6/lib/X11. | | Kent | | > I have a Intel 810e chipset, and I have read that XFree86 4.X supports | > these chips. | > | > I also read that if you want to configure the XF86Config file for these | > chips that you have to load the agp.ko module into the kernel to use | > agpgart | > | > I have done this by adding the line agp_load=?YES? to the | > /boot/loader.conf file, they said it than loads the module at booting. | > | > I also created the AGP device node in the /dev directory with sh MAKEDEV | > agpgart, but with all these changes, I still can?t configure or get the X | > | > server starting. | > | > | > | > I don?t know if I am doing something wrong or missing something, but | > when I do I hope you guys can help me with this, because for so far I | > like BSD | > | > and would like to learn much more of it. | > | > | > | > Greetings | > | > J.J. Rijpkema -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) http://www.babbleon.org http://www.eff.org http://www.programming-freedom.org If you smell the smoke you don't need to be told what you've got to do; Yet there's a certain breed, so very in-between, they'd rather take a vote. -- DEVO -- Here To Go To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:11:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.rdc-kc.rr.com (smtp2.rdc-kc.rr.com [24.94.162.201]) by hub.freebsd.org (Postfix) with ESMTP id A103C37B41A for ; Fri, 3 May 2002 07:11:24 -0700 (PDT) Received: from bogart (mke-65-31-92-20.wi.rr.com [65.31.92.20]) by smtp2.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g43EBKCF002834 for ; Fri, 3 May 2002 09:11:20 -0500 (CDT) Message-ID: <000b01c1f2ac$6cfb9bd0$145c1f41@bogart> From: "Nick Lozinsky" To: Subject: DMA and FreeBSD4.5-STABLE Date: Fri, 3 May 2002 09:11:27 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I noticed that some versions before 4.5-STABLE had the DMA enable option in the kernel config file; 4.5-STABLE now, doesnt? Its not there, so I try the option from the previous versions, and the config command fives me an error. Does that mean it's a different option or is DMA enabled by default in 4.5-STABLE? Please shed some light. Thank you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:12:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id D640437B41A for ; Fri, 3 May 2002 07:12:38 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43ECF306418 for ; Fri, 3 May 2002 10:12:15 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43FCvTM004084 for questions@freebsd.org; Fri, 3 May 2002 11:12:57 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 11:12:57 -0400 From: David Banning To: questions@freebsd.org Subject: mounting linprocfs gives error Message-ID: <20020503111257.A3919@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG my fstab; # Device Mountpoint FStype Options Dump Pass# /dev/ad1s1b none swap sw 0 0 /dev/ad1s1a / ufs rw 1 1 /dev/ad1s1f /usr ufs rw 2 2 /dev/ad1s1e /var ufs rw 2 2 /dev/acd0c /cdrom cd9660 ro,noauto 0 0 proc /proc procfs rw 0 0 linproc /compat/linux/proc linprocfs rw 0 0 # mount -a gives error; linprocfs: vfsload(linprocfs): Exec format error # uname -a; FreeBSD skytrackercanada.com 4.5-STABLE FreeBSD 4.5-STABLE #43: Fri Apr 26 02:34:11 EST 2002 root@skytrackercanada.com:/usr/obj/usr/src/sys/tracker i386 # kldstat; d Refs Address Size Name 1 6 0xc0000000 40000000 kernel 2 1 0xc1369000 a000 ibcs2.ko 3 1 0xc138b000 2000 rtc.ko 4 2 0xc138e000 14000 linux.ko 5 1 0xc13b3000 9000 vmmon_up.ko 6 1 0xc13bf000 4000 if_tap.ko Any idea what I can do here? When it trys to mount on boot I get the same problem and it goes into single user mode. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:24:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from infinity.aesredfish.net (ns1.aesredfish.net [65.168.0.12]) by hub.freebsd.org (Postfix) with ESMTP id 7BB5237B41A for ; Fri, 3 May 2002 07:24:41 -0700 (PDT) Received: from potentialtech.com (mhope-dhcp-65-168-1-181.dashfast.com [65.168.1.181]) by infinity.aesredfish.net (8.11.6/8.11.0) with ESMTP id g43EOiU09925 for ; Fri, 3 May 2002 10:24:44 -0400 Message-ID: <3CD29EE6.3060108@potentialtech.com> Date: Fri, 03 May 2002 10:29:58 -0400 From: Bill Moran Organization: Potential Technologies User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502 X-Accept-Language: en-us, en MIME-Version: 1.0 To: questions@freebsd.org Subject: pkg_delete vs. make deinstall - not synced? Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I recently did a bunch of deinstalling & installing on my system to update a whole lotta stale ports. I'm curious. If I install from the ports, it creates a directory in /var/db/pkg which I can then use the pkg_delete command to remove the port. The ports tree uses some other method to determine if the port is installed, however. example: 1. cd /usr/ports/devel/gmake; make install 2. pkg_delete gmake-whatever 3. Then try to make any port that depends on gmake The result is the port fails with a mysterious stop error. It knows it needs gmake, but it thinks it's installed. So it skips making it and trys to continue, but the gmake binary (obviously) isn't there. I can cd /usr/ports/devel/gmake ; make install and it does nothing, because the port seems to assume that it's already installed. If I do "make reinstall" it fixes things, or if I make deinstall it gives me errors, but is able to make install afterward. I don't really have a "solution" to this, as I'm not sure exactly why it's happening. If someone could shed a little light I would appreciate it. Otherwise, is there someway we can make this cleaner? -- Bill Moran Potential Technology http://www.potentialtech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:29:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gatekeeper.orem.verio.net (gatekeeper.orem.verio.net [192.41.0.8]) by hub.freebsd.org (Postfix) with ESMTP id 152AF37B41B for ; Fri, 3 May 2002 07:29:54 -0700 (PDT) Received: from mx.dmz.orem.verio.net (mx.dmz.orem.verio.net [10.1.1.10]) by gatekeeper.orem.verio.net (Postfix) with ESMTP id C6FB03BF1B9 for ; Fri, 3 May 2002 08:29:53 -0600 (MDT) Received: from vespa.dmz.orem.verio.net (vespa.dmz.orem.verio.net [10.1.1.59]) by mx.dmz.orem.verio.net (8.11.6/8.11.6) with ESMTP id g43ETrd79206 for ; Fri, 3 May 2002 08:29:53 -0600 (MDT) Date: Fri, 3 May 2002 08:45:40 -0600 (MDT) From: Fred Clift X-X-Sender: To: Subject: filing a PR Message-ID: <20020503084100.X28140-100000@vespa.dmz.orem.verio.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I used send-pr the other (Tuesday) day to submit a bug (and patch) that I discovered. It's non-critical, but clearly broken and easy to fix. Am I supposed to be getting a response from some automated tool saying my bug has been entered? Is my bug supposed to show up in the gnats db? I've seen and heard nothing since then and I just dont know what I should be expecting. Comments? should I be re-submitting? Second question -- I have several pccard.conf entries that are not in the standard distribution. A while back I emailed one of them to imp@freebsd.org as it suggests in /etc/defauts/pccard.conf. Should I be opening a PR on these instead? or just sending them to imp@...? Fred -- Fred Clift - fclift@verio.net -- Remember: If brute force doesn't work, you're just not using enough. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:30:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21508.mail.yahoo.com (web21508.mail.yahoo.com [66.163.169.19]) by hub.freebsd.org (Postfix) with SMTP id 3E4FE37B405 for ; Fri, 3 May 2002 07:30:04 -0700 (PDT) Message-ID: <20020503143003.7504.qmail@web21508.mail.yahoo.com> Received: from [24.100.124.207] by web21508.mail.yahoo.com via HTTP; Fri, 03 May 2002 10:30:03 EDT Date: Fri, 3 May 2002 10:30:03 -0400 (EDT) From: Oi Yan Subject: /var/log/message To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-529523739-1020436203=:6496" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --0-529523739-1020436203=:6496 Content-Type: text/plain; charset=us-ascii I checked the /var/log/message and got the wordings May 3 22:00:44 free -- MARK -- What is this meaning? Thank you --------------------------------- Games, Movies, Music & Sports! Yahoo! Canada Entertainment --0-529523739-1020436203=:6496 Content-Type: text/html; charset=us-ascii

I checked the /var/log/message and got the wordings

May  3 22:00:44 free -- MARK --

What is this meaning?

Thank you


Games, Movies, Music & Sports! Yahoo! Canada Entertainment
--0-529523739-1020436203=:6496-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:37: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from darwin.lastamericanempire.com (dsl081-101-239.den1.dsl.speakeasy.net [64.81.101.239]) by hub.freebsd.org (Postfix) with ESMTP id 22B3A37B41A for ; Fri, 3 May 2002 07:37:03 -0700 (PDT) Received: by darwin.lastamericanempire.com (Postfix, from userid 1001) id EF8C21D10D; Fri, 3 May 2002 08:37:08 -0600 (MDT) Date: Fri, 3 May 2002 08:37:08 -0600 From: Zach Thompson To: Nick Lozinsky Cc: freebsd-questions@FreeBSD.ORG Subject: Re: DMA and FreeBSD4.5-STABLE Message-ID: <20020503083708.A4744@darwin.lastamericanempire.com> References: <000b01c1f2ac$6cfb9bd0$145c1f41@bogart> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <000b01c1f2ac$6cfb9bd0$145c1f41@bogart>; from nl3481@wi.rr.com on Fri, May 03, 2002 at 09:11:27AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Nick Lozinsky [2002-05-03 08:11]: > Hi, > > I noticed that some versions before 4.5-STABLE had the DMA enable option in > the kernel config file; 4.5-STABLE now, doesnt? Its not there, so I try the > option from the previous versions, and the config command fives me an error. > Does that mean it's a different option or is DMA enabled by default in > 4.5-STABLE? > Not an option anymore. Just remove the line and throw any changes you need from the defaults in loader.conf. man ata: The following tunables are setable from the loader: hw.ata.ata_dma set to 1 for DMA access, 0 for PIO (default is DMA). hw.ata.atapi_dma set to 1 for DMA access, 0 for PIO (default is PIO). Zach Thompson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:37:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rhadamanth.submonkey.net (pc4-card4-0-cust162.cdf.cable.ntl.com [80.4.14.162]) by hub.freebsd.org (Postfix) with ESMTP id BF33137B425 for ; Fri, 3 May 2002 07:37:17 -0700 (PDT) Received: from setantae by rhadamanth.submonkey.net with local (Exim 3.36 #1) id 173eBJ-0002kM-00; Fri, 03 May 2002 15:37:09 +0100 Date: Fri, 3 May 2002 15:37:09 +0100 From: Ceri Davies To: Oi Yan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: /var/log/message Message-ID: <20020503143709.GA10336@submonkey.net> Mail-Followup-To: Ceri Davies , Oi Yan , freebsd-questions@FreeBSD.ORG References: <20020503143003.7504.qmail@web21508.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020503143003.7504.qmail@web21508.mail.yahoo.com> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 10:30:03AM -0400, Oi Yan wrote: > > I checked the /var/log/message and got the wordings > > May 3 22:00:44 free -- MARK -- > > What is this meaning? It's just a mark message that syslog prints (every 20 minutes by default) to let you know it hasn't died. See the manpages for syslogd (-m flag) and syslog.conf (mark facility). Ceri -- get the cool shoe shine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:38: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.clarotech.co.za (falcon.clarotech.co.za [196.22.181.162]) by hub.freebsd.org (Postfix) with ESMTP id 62DF537B416 for ; Fri, 3 May 2002 07:37:52 -0700 (PDT) Received: (from root@localhost) by falcon.clarotech.co.za (8.12.3/8.12.2) id g43EbmVG033317 for freebsd-questions@freebsd.org; Fri, 3 May 2002 16:37:48 +0200 (SAST) (envelope-from TonyR@clarotech.co.za) Received: from prowler.clarotech.co.za (prowler.clarotech.co.za [192.168.250.2]) by falcon.clarotech.co.za (8.12.3/8.12.2) with ESMTP id g43EbmF8033305 for ; Fri, 3 May 2002 16:37:48 +0200 (SAST) (envelope-from TonyR@clarotech.co.za) Content-Class: urn:content-classes:message Subject: HW: FreeBSD on Compaq 4000 MIME-Version: 1.0 Date: Fri, 3 May 2002 16:37:48 +0200 Content-Type: multipart/signed; micalg=SHA1; protocol="application/x-pkcs7-signature"; boundary="----=_NextPart_000_001E_01C1F2C0.DB3C76A0" X-MimeOLE: Produced By Microsoft Exchange V6.0.4417.0 Message-ID: <09B07E5FCE15BB44B9CDAF92E483935E1FA55D@prowler.clarotech.co.za> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: HW: FreeBSD on Compaq 4000 Thread-Index: AcHysBeQpG5cswh9RY+M/AWZYSo0vw== From: "Tony Russell" To: X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_001E_01C1F2C0.DB3C76A0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_001F_01C1F2C0.DB3C76A0" ------=_NextPart_001_001F_01C1F2C0.DB3C76A0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi Does anyone know if FreeBSD-STABLE will run on a Compaq ProLiant 4000 in multiprocessor mode? ______________________________________________________ Antony Russell Technical Director Clarotech Consulting (Pty) Ltd EMail: TonyR@Clarotech.co.za Phone: 021.671.5350 ------=_NextPart_001_001F_01C1F2C0.DB3C76A0 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable HW: FreeBSD on Compaq 4000

Hi

Does = anyone know if FreeBSD-STABLE will run on a Compaq ProLiant 4000 in = multiprocessor mode?

______________________________________________________

Antony Russell

Technical Director

Clarotech Consulting (Pty) Ltd

EMail: TonyR@Clarotech.co.za

Phone: 021.671.5350

------=_NextPart_001_001F_01C1F2C0.DB3C76A0-- ------=_NextPart_000_001E_01C1F2C0.DB3C76A0 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJIjCCArEw ggIaoAMCAQICAwdhKTANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdl c3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsT FENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAw MC44LjMwMB4XDTAyMDUwMzA2MjgzMFoXDTAzMDUwMzA2MjgzMFowdDEQMA4GA1UEBBMHUnVzc2Vs bDEYMBYGA1UEKhMPQW50b255IExhd3JlbmNlMSAwHgYDVQQDExdBbnRvbnkgTGF3cmVuY2UgUnVz c2VsbDEkMCIGCSqGSIb3DQEJARYVVG9ueVJAQ2xhcm90ZWNoLmNvLnphMIGfMA0GCSqGSIb3DQEB AQUAA4GNADCBiQKBgQDmmV0pkvM/1puWRKGMs0+KRmUzN3fCOVsWM+5n10kokVH+lH0HJpq4jvG+ H19BrVeg9EnNoDue/7iI4EgLN0bTKjO7qVUBO2J5PClIUJ1XPXr9hMbOySpSadrcXOjXK4mBqawr q8Cp/yiyCFsvYE+Dnn4OrRuP6f34jdg/nHW2kwIDAQABozIwMDAgBgNVHREEGTAXgRVUb255UkBD bGFyb3RlY2guY28uemEwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQQFAAOBgQAxilGiNutnZWKE 51lcQwAYLGr0InlM0TlSzpQk0kgSLJzui8x/6uS/Tfs+Z+EtcGGWCeVXIRN8UcLRltp69fRyHjdE 6hvNJTz3Kbm0ynMFvr2pUmI72bI4fpTxlKinAuOW3m83hW/jHNd+7k3wU6TQ0G48PDq1vir1rZLf ob5mtDCCAy0wggKWoAMCAQICAQAwDQYJKoZIhvcNAQEEBQAwgdExCzAJBgNVBAYTAlpBMRUwEwYD VQQIEwxXZXN0ZXJuIENhcGUxEjAQBgNVBAcTCUNhcGUgVG93bjEaMBgGA1UEChMRVGhhd3RlIENv bnN1bHRpbmcxKDAmBgNVBAsTH0NlcnRpZmljYXRpb24gU2VydmljZXMgRGl2aXNpb24xJDAiBgNV BAMTG1RoYXd0ZSBQZXJzb25hbCBGcmVlbWFpbCBDQTErMCkGCSqGSIb3DQEJARYccGVyc29uYWwt ZnJlZW1haWxAdGhhd3RlLmNvbTAeFw05NjAxMDEwMDAwMDBaFw0yMDEyMzEyMzU5NTlaMIHRMQsw CQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBlIFRvd24xGjAY BgNVBAoTEVRoYXd0ZSBDb25zdWx0aW5nMSgwJgYDVQQLEx9DZXJ0aWZpY2F0aW9uIFNlcnZpY2Vz IERpdmlzaW9uMSQwIgYDVQQDExtUaGF3dGUgUGVyc29uYWwgRnJlZW1haWwgQ0ExKzApBgkqhkiG 9w0BCQEWHHBlcnNvbmFsLWZyZWVtYWlsQHRoYXd0ZS5jb20wgZ8wDQYJKoZIhvcNAQEBBQADgY0A MIGJAoGBANRp19SwlGRbcelH2AxRtupykbCEXn0tDY97Et+FJXUodDpCLGMnn5V7S+9+GYcdhuqj 3bnOlmQawhRuRKx85o/oTQ9xH0A4pgCjh3j2+ZSGXq3qwF5269kUo11uenwMpUtVfwYZKX+emibV ars4JAhqmMex2qOYkf152+VaxBy5AgMBAAGjEzARMA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcN AQEEBQADgYEAx+ySfk749ZalZ2IqpPBNEWDQb41gWGGsJrtSNVwIzzD7qEqWih9iQiOMFw/0umSc F6xHKd+dmF7SbGBxXKKs3Hnj524ARx+1DSjoAp3kmv0T9KbZfLH43F8jJgmRgHPQFBveQ6mDJfLm nC8Vyv6mq4oHdYsM3VGEa+T40c53ooEwggM4MIICoaADAgECAhBmRXK3zHT1z2N2RYTQLpEBMA0G CSqGSIb3DQEBBAUAMIHRMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIwEAYD VQQHEwlDYXBlIFRvd24xGjAYBgNVBAoTEVRoYXd0ZSBDb25zdWx0aW5nMSgwJgYDVQQLEx9DZXJ0 aWZpY2F0aW9uIFNlcnZpY2VzIERpdmlzaW9uMSQwIgYDVQQDExtUaGF3dGUgUGVyc29uYWwgRnJl ZW1haWwgQ0ExKzApBgkqhkiG9w0BCQEWHHBlcnNvbmFsLWZyZWVtYWlsQHRoYXd0ZS5jb20wHhcN MDAwODMwMDAwMDAwWhcNMDQwODI3MjM1OTU5WjCBkjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdl c3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsT FENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAw MC44LjMwMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDeMzKmY8cJJUU+0m54J2eBxdqIGYKX DuNEKYpjNSptcDz63K737nRvMLwzkH/5NHGgo22Y8cNPomXbDfpL8dbdYaX5hc1VmjUanZJ1qCeu 2HL5ugL217CR3hzpq+AYA6h8Q0JQUYeDPPA5tJtUihOH/7ObnUlmAC0JieyUa+mhaQIDAQABo04w TDApBgNVHREEIjAgpB4wHDEaMBgGA1UEAxMRUHJpdmF0ZUxhYmVsMS0yOTcwEgYDVR0TAQH/BAgw BgEB/wIBADALBgNVHQ8EBAMCAQYwDQYJKoZIhvcNAQEEBQADgYEAMbFLR135AXHl9VNsXXnWPZjA JhNigSKnEvgilegbSbcnewQ5uvzm8iTrkfq97A0qOPdQVahs9w2tTBu8A/S166JHn2yiDFiNMUIJ EWywGmnRKxKyQF1q+XnQ6i4l3Yrk/NsNH50C81rbyjz2ROomaYd/SJ7OpZ/nhNjJYmKtBcYxggNp MIIDZQIBATCBmjCBkjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UE BxMJQ2FwZSBUb3duMQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZp Y2VzMSgwJgYDVQQDEx9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAwMC44LjMwAgMHYSkwCQYFKw4D AhoFAKCCAiQwGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDIwNTAz MTQzNzQ2WjAjBgkqhkiG9w0BCQQxFgQUhXwzGYdf1bPEOLAjrTaXFVcAwZMwZwYJKoZIhvcNAQkP MVowWDAKBggqhkiG9w0DBzAHBgUrDgMCGjAOBggqhkiG9w0DAgICAIAwDQYIKoZIhvcNAwICAUAw BwYFKw4DAgcwDQYIKoZIhvcNAwICASgwCgYIKoZIhvcNAgUwgasGCSsGAQQBgjcQBDGBnTCBmjCB kjELMAkGA1UEBhMCWkExFTATBgNVBAgTDFdlc3Rlcm4gQ2FwZTESMBAGA1UEBxMJQ2FwZSBUb3du MQ8wDQYDVQQKEwZUaGF3dGUxHTAbBgNVBAsTFENlcnRpZmljYXRlIFNlcnZpY2VzMSgwJgYDVQQD Ex9QZXJzb25hbCBGcmVlbWFpbCBSU0EgMjAwMC44LjMwAgMHYSkwga0GCyqGSIb3DQEJEAILMYGd oIGaMIGSMQswCQYDVQQGEwJaQTEVMBMGA1UECBMMV2VzdGVybiBDYXBlMRIwEAYDVQQHEwlDYXBl IFRvd24xDzANBgNVBAoTBlRoYXd0ZTEdMBsGA1UECxMUQ2VydGlmaWNhdGUgU2VydmljZXMxKDAm BgNVBAMTH1BlcnNvbmFsIEZyZWVtYWlsIFJTQSAyMDAwLjguMzACAwdhKTANBgkqhkiG9w0BAQEF AASBgB91IBOPjbbWyaqCjj2duJeH264gebFHdFCMRxWo5H7D7sOiahgnZ2mZ/bTP/kbrLAR3bpRP b+LDK4LCuKCFWODtAsAjbxADA+6yELc4lGvXI5AfKgV+y2vOg7HIvQz6rwA0s37ldvS8+TAcNWrW fo8zpcogFvQWklv+Iju+AnDpAAAAAAAA ------=_NextPart_000_001E_01C1F2C0.DB3C76A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:39: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 1F77337B41C for ; Fri, 3 May 2002 07:38:47 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by mail.broadpark.no (Postfix) with ESMTP id 918D67F19 for ; Fri, 3 May 2002 16:38:23 +0200 (MEST) Received: from 217.13.29.51 ( [217.13.29.51]) as user johann@mail.broadpark.no by mail.broadpark.no with HTTP; Fri, 3 May 2002 16:38:23 +0200 Message-ID: <1020436703.3cd2a0df74911@mail.broadpark.no> Date: Fri, 3 May 2002 16:38:23 +0200 From: johann@broadpark.no To: questions@freebsd.org Subject: Using CVS to manage configuration files MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1;q=1.0 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 X-Originating-IP: 217.13.29.51 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I was hoping someone who have dealt with the same problem could tell me what they did. `cvs co ninja.amphex.com' (~/cvs/ninja.amphex.com) and then `cvs add /etc/rc.conf', hoping it could add the file to ninja.amphex.com/etc/rc.conf obviously didn't work. I'm using http://www.freebsddiary.org/cvs.php to direct me, though it is not in conjunction with my intentions. The article seems to explain how to modify a directory with files. Well mine is without files, about to get added some. How does this all work? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 7:39:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.clarotech.co.za (falcon.clarotech.co.za [196.22.181.162]) by hub.freebsd.org (Postfix) with ESMTP id 92E1137B405 for ; Fri, 3 May 2002 07:39:15 -0700 (PDT) Received: (from root@localhost) by falcon.clarotech.co.za (8.12.3/8.12.2) id g43EdCNp033570 for freebsd-questions@freebsd.org; Fri, 3 May 2002 16:39:12 +0200 (SAST) (envelope-from TonyR@clarotech.co.za) Received: from prowler.clarotech.co.za (prowler.clarotech.co.za [192.168.250.2]) by falcon.clarotech.co.za (8.12.3/8.12.2) with ESMTP id g43EdCF8033562 for ; Fri, 3 May 2002 16:39:12 +0200 (SAST) (envelope-from TonyR@clarotech.co.za) Received: from falcon.clarotech.co.za ([192.168.250.11]) by prowler.clarotech.co.za with Microsoft SMTPSVC(5.0.2195.4453); Fri, 3 May 2002 16:38:17 +0200 Received: (from root@localhost) by falcon.clarotech.co.za (8.12.3/8.12.2) id g43EcHfW033481 for tonyr@clarotech.co.za; Fri, 3 May 2002 16:38:17 +0200 (SAST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from mx2.freebsd.org (mx2.FreeBSD.org [216.136.204.119]) by falcon.clarotech.co.za (8.12.3/8.12.2) with ESMTP id g43EcBF8033468 for ; Fri, 3 May 2002 16:38:13 +0200 (SAST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Received: from hub.freebsd.org (hub.FreeBSD.org [216.136.204.18]) by mx2.freebsd.org (Postfix) with ESMTP id D8FD355775; Fri, 3 May 2002 07:38:06 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: by hub.freebsd.org (Postfix, from userid 538) id 8C6EA37B405; Fri, 3 May 2002 07:38:03 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by hub.freebsd.org (Postfix) with SMTP id 668BE2E8012; Fri, 3 May 2002 07:38:03 -0700 (PDT) X-MimeOLE: Produced By Microsoft Exchange V6.0.4417.0 Received: by hub.freebsd.org (bulk_mailer v1.12); Fri, 3 May 2002 07:38:03 -0700 Content-Class: urn:content-classes:message Subject: HW: FreeBSD on Compaq 4000 Date: Fri, 3 May 2002 16:39:11 +0200 Message-ID: <09B07E5FCE15BB44B9CDAF92E483935E1FA55D@prowler.clarotech.co.za> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: FreeBSD on Compaq 4000 Thread-Index: AcHysBeQpG5cswh9RY+M/AWZYSo0vw== List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: From: "Tony Russell" To: X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi (without the digital signature :-( Does anyone know if FreeBSD-STABLE will run on a Compaq ProLiant 4000 in multiprocessor mode? ______________________________________________________ Antony Russell Technical Director Clarotech Consulting (Pty) Ltd EMail: TonyR@Clarotech.co.za Phone: 021.671.5350 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8: 9:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.navitaire.com (mail.navitaire.com [205.182.62.81]) by hub.freebsd.org (Postfix) with ESMTP id C455237B419 for ; Fri, 3 May 2002 08:09:16 -0700 (PDT) Received: from exchange.Navitaire.com (exch.navitaire.com [149.122.4.14]) by mail.navitaire.com (Switch-2.1.4/Switch-2.1.0) with ESMTP id g43F9Jg27635 for ; Fri, 3 May 2002 10:09:19 -0500 (CDT) Received: by exchange.Navitaire.com with Internet Mail Service (5.5.2653.19) id <2R5M1BG1>; Fri, 3 May 2002 10:08:30 -0500 Message-ID: From: "Henning, Brian" To: freebsd-questions@FreeBSD.ORG Subject: fetchmail Date: Fri, 3 May 2002 10:08:22 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am trying to get fetchmail to work on my BSD box but i am having some problems. I get a error message of 'SMTP connect to localhost failed' as shown below. I am pretty sure I have it configured properly on the fetchmail side. Do i need to have sendmail installed and configured to use fetchmail? If so can you direct me to some documentation for correct configuration.. thank, brian fetchmail: 5.9.6 querying pop.scomurr.com (protocol POP3) at Fri May 3 10:05:38 2002: poll started fetchmail: POP3< +OK Pop server (CH version 1.6) at marlborough starting. fetchmail: POP3> USER bhenning@scomurr.com fetchmail: POP3< +OK Password required for bhenning@scomurr.com. fetchmail: POP3> PASS * fetchmail: POP3< +OK bhenning has 7 message(s) (214550 octets). fetchmail: POP3> STAT fetchmail: POP3< +OK 7 214550 7 messages for bhenning@scomurr.com at pop.scomurr.com (214550 octets). fetchmail: POP3> LIST fetchmail: POP3< +OK 7 messages (214550 octets) fetchmail: POP3< 1 2896 fetchmail: POP3< 2 2493 fetchmail: POP3< 3 3409 fetchmail: POP3< 4 188724 fetchmail: POP3< 5 11236 fetchmail: POP3< 6 3221 fetchmail: POP3< 7 2571 fetchmail: POP3< . fetchmail: POP3> RETR 1 fetchmail: POP3< +OK 2896 octets reading message bhenning@scomurr.com@pop.scomurr.com:1 of 7 (2896 octets) fetchmail: SMTP connect to localhost failed fetchmail: POP3> QUIT fetchmail: POP3< Hi Brian, fetchmail: SMTP transaction error while fetching from pop.scomurr.com fetchmail: 5.9.6 querying pop.scomurr.com (protocol POP3) at Fri May 3 10:05:45 2002: poll completed fetchmail: Query status=10 (SMTP) fetchmail: normal termination, status 10 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8:22:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id E4A3B37B404 for ; Fri, 3 May 2002 08:22:30 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43FP0205660 for ; Fri, 3 May 2002 17:25:00 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43FOxU05656 for ; Fri, 3 May 2002 17:24:59 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43FMTi16026 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 17:22:29 +0200 Date: Fri, 3 May 2002 17:22:29 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: fetchmail Message-ID: <20020503172229.A15598@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: ; from brian.henning@navitaire.com on Fri, May 03, 2002 at 10:08:22AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 10:08, Henning, Brian spoke: > Hello, > > I am trying to get fetchmail to work on my BSD box but i am having some > problems. I get a error message of > 'SMTP connect to localhost failed' as shown below. I am pretty sure I have > it configured properly on the fetchmail side. Do i need to have sendmail > installed and configured to use fetchmail? If so can you direct me to some Afaik fetchmail needs an MTA such as sendmail listening on port 25 or 587. Have you tried sendmail_enable="YES" in /etc/rc.conf? What does `netstat -an|grep \\\*` tell? -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8:32:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.navitaire.com (mail.navitaire.com [205.182.62.81]) by hub.freebsd.org (Postfix) with ESMTP id 1587737B41E for ; Fri, 3 May 2002 08:32:39 -0700 (PDT) Received: from exchange.Navitaire.com (exch.navitaire.com [149.122.4.14]) by mail.navitaire.com (Switch-2.1.4/Switch-2.1.0) with ESMTP id g43FWfg00759; Fri, 3 May 2002 10:32:41 -0500 (CDT) Received: by exchange.Navitaire.com with Internet Mail Service (5.5.2653.19) id <2R5M1BN2>; Fri, 3 May 2002 10:31:53 -0500 Message-ID: From: "Henning, Brian" To: "'freebsd-questions@FreeBSD.ORG'" Cc: "'hanspeter_roth@hotmail.com'" Subject: RE: fetchmail Date: Fri, 3 May 2002 10:31:49 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hanspeter, thanks for the help. i turned off send mail in my rc.conf file because it made bsd hang. fyi, i am behind a firewall. netstat -an|grep \\\* : tcp4 0 0 *.6010 *.* LISTEN tcp4 0 0 *.3306 *.* LISTEN tcp4 0 0 *.80 *.* LISTEN tcp4 0 0 *.22 *.* LISTEN tcp4 0 0 *.139 *.* LISTEN tcp4 0 0 *.2401 *.* LISTEN udp4 0 0 127.0.0.1.1039 *.* udp4 0 0 192.168.1.3.138 *.* udp4 0 0 192.168.1.3.137 *.* udp4 0 0 *.138 *.* udp4 0 0 *.137 *.* udp4 0 0 *.514 *.* thanks, brian -----Original Message----- From: Hanspeter Roth [mailto:hanspeter_roth@hotmail.com] Sent: Friday, May 03, 2002 10:22 AM To: freebsd-questions@FreeBSD.ORG Subject: Re: fetchmail On May 03 at 10:08, Henning, Brian spoke: > Hello, > > I am trying to get fetchmail to work on my BSD box but i am having some > problems. I get a error message of > 'SMTP connect to localhost failed' as shown below. I am pretty sure I have > it configured properly on the fetchmail side. Do i need to have sendmail > installed and configured to use fetchmail? If so can you direct me to some Afaik fetchmail needs an MTA such as sendmail listening on port 25 or 587. Have you tried sendmail_enable="YES" in /etc/rc.conf? What does `netstat -an|grep \\\*` tell? -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8:33:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 16BA137B405 for ; Fri, 3 May 2002 08:33:50 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173f48-0001DZ-00 for ; Fri, 03 May 2002 16:33:48 +0100 Date: Fri, 3 May 2002 16:33:48 +0100 From: Daniel Bye To: freebsd-questions@FreeBSD.ORG Subject: Re: fetchmail Message-ID: <20020503153348.GA4015@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 10:08:22AM -0500, Henning, Brian wrote: > Hello, > > I am trying to get fetchmail to work on my BSD box but i am having some > problems. I get a error message of > 'SMTP connect to localhost failed' as shown below. I am pretty sure I have > it configured properly on the fetchmail side. Do i need to have sendmail > installed and configured to use fetchmail? If so can you direct me to some > documentation for correct configuration.. You will need to have some kind of MTA available, such as sendmail or exim, or you can use procmail for this purpose (it needs to run suid root for this to work, presumably so it has permission to write to /var/mail/ ). You need to add this to your .fetchmailrc rules to pass messages to procmail: mda /usr/local/bin/procmail This way, you do not need to have an MTA running all the time. YMMV, as they say. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8:39:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id BC9C637B404 for ; Fri, 3 May 2002 08:39:54 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43FgNt06101 for ; Fri, 3 May 2002 17:42:23 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43FgNU06097 for ; Fri, 3 May 2002 17:42:23 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43FdrI16442 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 17:39:53 +0200 Date: Fri, 3 May 2002 17:39:53 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: fetchmail Message-ID: <20020503173953.A16290@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: ; from brian.henning@navitaire.com on Fri, May 03, 2002 at 10:31:49AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 10:31, Henning, Brian spoke: > Hanspeter, > > thanks for the help. > > i turned off send mail in my rc.conf file because it made bsd hang. > fyi, i am behind a firewall. Ok. Then no MTA (sendmail etc.) is listening on port 25. You may try to fix the cause of the haning of sendmail. Maybe a problem with /etc/resolv.conf or /etc/hosts? Or you may try fetchmail with --mda (man fetchmail). -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 8:56:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from albatross.prod.itd.earthlink.net (albatross.mail.pas.earthlink.net [207.217.120.120]) by hub.freebsd.org (Postfix) with ESMTP id 1690A37B404 for ; Fri, 3 May 2002 08:56:42 -0700 (PDT) Received: from user-119a2km.biz.mindspring.com ([66.149.10.150] helo=scee.dsj.net) by albatross.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173fQD-0004vC-00 for freebsd-questions@freebsd.org; Fri, 03 May 2002 08:56:37 -0700 Received: from dsj by scee.dsj.net with local (Exim 3.35 #1 (Debian)) id 173fQM-0003HA-00 for ; Fri, 03 May 2002 11:56:46 -0400 Date: Fri, 3 May 2002 11:56:46 -0400 From: "David S. Jackson" To: freebsd-questions@freebsd.org Subject: can't compile gnomecore Message-ID: <20020503155646.GA12354@scee.dsj.net> Reply-To: "David S. Jackson" Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I cvsupped everything recently (rebuilt, reinstalled) and I'm upgrading gnome accordingly. However, in trying to compile gnomecore, I get the following: cc -DHAVE_CONFIG_H -I. -I. -I.. -DGNOME_VFS_CONFDIR=\"/usr/X11R6/etc\" -DGNOME_VFS_DATADIR=\"/usr/X11R6/share/gnome\" -DGNOME_VFS_PREFIX=\"/usr/X11R6\" -I.. -I../intl -I.. -I../intl -I../libgnomevfs -I/usr/local/include/glib12 -D_THREAD_SAFE -I/usr/local/include/glib12 -I/usr/local/include/orbit-1.0 -I/usr/local/include -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/local/include/orbit-1.0 -I/usr/local/include -I/usr/local/include/gnome-xml -I/usr/X11R6/include/gconf/1 -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/local/include/orbit-1.0 -I/usr/local/include -Wall -Wunused -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DLIBDIR=\"/usr/X11R6/lib\" -DSYSCONFDIR=\"/usr/X11R6/etc\" -DG_LOG_DOMAIN=\"GnomeVFS\" -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_THREAD_SAFE -I/usr/local/include -O -pipe -I/usr/X11R6/include -c gnome-vfs-application-registry.c -fPIC -DPIC -o .libs/gnome-vfs-application-registry.lo In file included from gnome-vfs-mime-private.h:26, from gnome-vfs-application-registry.c:32: ../libgnomevfs/gnome-vfs-mime-monitor.h:28: gtk/gtkobject.h: No such file or directory In file included from gnome-vfs-mime-private.h:26, from gnome-vfs-application-registry.c:32: ../libgnomevfs/gnome-vfs-mime-monitor.h:31: syntax error before `GtkObject' gmake[3]: *** [gnome-vfs-application-registry.lo] Error 1 gmake[3]: Leaving directory `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5' gmake: *** [all-recursive-am] Error 2 *** Error code 2 Stop in /usr/ports/devel/gnomevfs. *** Error code 1 Stop in /usr/ports/sysutils/gnomecontrolcenter. *** Error code 1 Stop in /usr/ports/www/glibwww. *** Error code 1 Stop in /usr/ports/www/gtkhtml. *** Error code 1 Stop in /usr/ports/x11/gnomecore. **ROOT**@juno /usr/ports/x11/gnomecore]# This looks to me like an actual syntax error somewhere, because I have the gtkobject file: -r--r--r-- 1 root wheel 13065 Apr 29 14:31 /usr/X11R6/include/gtk12/gtk/gtkobject.h. Is this a problem that can just be fixed by portupgrading the gnome ports or something? -- David S. Jackson dsj@dsj.net =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= I worked in a health food store once. A guy came in and asked me, "If I melt dry ice, can I take a bath without getting wet?" -- Steven Wright To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9: 2:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 0E1F437B41A for ; Fri, 3 May 2002 09:02:09 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43G21YP000899; Fri, 3 May 2002 12:02:02 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: can't compile gnomecore From: Joe Marcus Clarke To: "David S. Jackson" Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <20020503155646.GA12354@scee.dsj.net> References: <20020503155646.GA12354@scee.dsj.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 12:02:01 -0400 Message-Id: <1020441722.784.12.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 12:56, David S. Jackson wrote: > Hi, > > I cvsupped everything recently (rebuilt, reinstalled) and I'm upgrading > gnome accordingly. However, in trying to compile gnomecore, I get the > following: You need to update all your GNOME dependencies first. Looks like gtk might be out of date or perhaps damaged. You might try a forced update of gtk12, and make clean, then rebuild gnomecore. See if things improve. Joe > > cc -DHAVE_CONFIG_H -I. -I. -I.. -DGNOME_VFS_CONFDIR=\"/usr/X11R6/etc\" > -DGNOME_VFS_DATADIR=\"/usr/X11R6/share/gnome\" > -DGNOME_VFS_PREFIX=\"/usr/X11R6\" -I.. -I../intl -I.. -I../intl > -I../libgnomevfs -I/usr/local/include/glib12 -D_THREAD_SAFE > -I/usr/local/include/glib12 -I/usr/local/include/orbit-1.0 > -I/usr/local/include -I/usr/X11R6/include -I/usr/local/include/glib12 > -I/usr/local/include/orbit-1.0 -I/usr/local/include > -I/usr/local/include/gnome-xml -I/usr/X11R6/include/gconf/1 > -I/usr/X11R6/include -I/usr/local/include/glib12 > -I/usr/local/include/orbit-1.0 -I/usr/local/include -Wall -Wunused > -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS > -DLIBDIR=\"/usr/X11R6/lib\" -DSYSCONFDIR=\"/usr/X11R6/etc\" > -DG_LOG_DOMAIN=\"GnomeVFS\" -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 > -D_THREAD_SAFE -I/usr/local/include -O -pipe -I/usr/X11R6/include -c > gnome-vfs-application-registry.c -fPIC -DPIC -o > .libs/gnome-vfs-application-registry.lo > In file included from gnome-vfs-mime-private.h:26, > from gnome-vfs-application-registry.c:32: > ../libgnomevfs/gnome-vfs-mime-monitor.h:28: > gtk/gtkobject.h: No such file or directory > In file included from gnome-vfs-mime-private.h:26, > from gnome-vfs-application-registry.c:32: > ../libgnomevfs/gnome-vfs-mime-monitor.h:31: > syntax error before `GtkObject' > gmake[3]: *** > [gnome-vfs-application-registry.lo] > Error 1 > gmake[3]: Leaving directory > `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' > gmake[2]: *** [all-recursive] Error 1 > gmake[2]: Leaving directory > `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5' > gmake: *** [all-recursive-am] Error 2 > *** Error code 2 > Stop in /usr/ports/devel/gnomevfs. > *** Error code 1 > Stop in /usr/ports/sysutils/gnomecontrolcenter. > *** Error code 1 > Stop in /usr/ports/www/glibwww. > *** Error code 1 > Stop in /usr/ports/www/gtkhtml. > *** Error code 1 > Stop in /usr/ports/x11/gnomecore. > **ROOT**@juno /usr/ports/x11/gnomecore]# > > This looks to me like an actual syntax error somewhere, because I have > the gtkobject file: > > -r--r--r-- 1 root wheel 13065 Apr 29 14:31 > /usr/X11R6/include/gtk12/gtk/gtkobject.h. > > > Is this a problem that can just be fixed by portupgrading the gnome > ports or something? > > > -- > David S. Jackson dsj@dsj.net > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > I worked in a health food store once. A guy came in > and asked me, "If I melt dry ice, can I take a bath > without getting wet?" -- Steven Wright > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9: 2:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 4785C37B400 for ; Fri, 3 May 2002 09:02:35 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43G54n06667 for ; Fri, 3 May 2002 18:05:04 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43G53U06663 for ; Fri, 3 May 2002 18:05:03 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43G2Xi16949 for questions@FreeBSD.ORG; Fri, 3 May 2002 18:02:33 +0200 Date: Fri, 3 May 2002 18:02:33 +0200 From: Hanspeter Roth To: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020503180233.A16817@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: questions@FreeBSD.ORG References: <20020503111257.A3919@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20020503111257.A3919@mail.clubplus.net>; from david@skytrackercanada.com on Fri, May 03, 2002 at 11:12:57AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 11:12, David Banning spoke: > # kldstat; > d Refs Address Size Name > 1 6 0xc0000000 40000000 kernel > 2 1 0xc1369000 a000 ibcs2.ko > 3 1 0xc138b000 2000 rtc.ko > 4 2 0xc138e000 14000 linux.ko > 5 1 0xc13b3000 9000 vmmon_up.ko > 6 1 0xc13bf000 4000 if_tap.ko linprocfs.ko is missing but linux.ko is present. Can you load linprocfs by kldload? Maybe linux_enable is required in /etc/rc.conf. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9: 3:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 5857737B404 for ; Fri, 3 May 2002 09:03:35 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43G3UYP000913; Fri, 3 May 2002 12:03:30 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: Gnome Problem After Portupgrade From: Joe Marcus Clarke To: Drew Tomlinson Cc: questions@FreeBSD.ORG In-Reply-To: <010101c1f206$8c69bcf0$6e2a6ba5@lc.ca.gov> References: <010101c1f206$8c69bcf0$6e2a6ba5@lc.ca.gov> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 12:03:30 -0400 Message-Id: <1020441810.784.14.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2002-05-02 at 15:24, Drew Tomlinson wrote: > I attempted to use portupgrade -rR to update gnome and all of it's > dependencies. I had a few problems along the way when portupgrade > failed to download one of the required tarballs and left my system in an > inconsistent state. I've worked through the issues and finally got the > upgrade completed but receive this error (in a window) when starting > gnome: > > Desk Guide Alert > > GNOME Desktop Guide (Pager) > > You are not running a GNOME Compliant Window Manager. GNOME support by > the window manager is strongly recommended for proper Desk Guide > Operation. > > I'm using Sawfish that installs with the gnome port. I've used > pkg_deinstall to remove sawfish-gnome and then rebuilt it from ports > using portinstall. Same error. Any ideas how to fix this short of > rebuiling gnome in its entirety? Can you send me the build log from sawfish-gnome as well as a screenshot of the error? Thanks. Joe > > Thanks, > > Drew > > List of all installed packages follows. Most everything is up to date. > > # portversion > Mesa = > ORBit = > XFree86 = > XFree86-FontServer = > XFree86-Server = > XFree86-clients = > XFree86-documents = > XFree86-font100dpi = > XFree86-font75dpi = > XFree86-fontCyrillic = > XFree86-fontDefaultBitmaps = > XFree86-fontEncodings = > XFree86-fontScalable = > XFree86-libraries = > autoconf213 = > automake14 = > bison < > bonobo = > bugbuddy = > cvsup = > db3 = > eel = > esound = > ezm3 = > freeamp-esound = > freetype = > freetype2 = > gal = > galeon = > gconf = > gdbm = > gdk-pixbuf = > gdm = > gettext = > gettext = > ggv = > ghex = > ghostscript-gnu = > glade = > gle = > glib = > glibwww = > gmake = > gnome = > gnomeapplets = > gnomeaudio = > gnomecanvas = > gnomecontrolcenter = > gnomecore = > gnomedb = > gnomegames = > gnomelibs = > gnomemedia = > gnomemimedata = > gnomemm = > gnomepilot = > gnomepilot-conduits = > gnomepim = > gnomeprint = > gnomeuserdocs = > gnomeutils = > gnomevfs = > gob = > gtar < > gtk = > gtk-engines = > gtkglarea = > gtkhtml = > gtkmm = > gtop = > guile = > guile-gnome = > guile-gtk = > imake = > imlib = > javavmwrapper = > jdk < > jpeg = > lcms = > libaudiofile = > libgda = > libghttp = > libglade = > libgnugetopt = > libgtop = > libiconv = > libmng = > libogg = > librep = > librsvg = > libsigc++ = > libtool = > libungif = > libunicode = > libvorbis = > libwww = > libxml = > linux_base = > m4 = > medusa = > mozilla = > mozilla-headers = > musicbrainz = > nasm = > nautilus = > nmap = > nmapfe = > nspr = > oaf = > open-motif-devel = > panelmm = > pilot-link = > pkg_tarup = > pkgconfig = > png = > popt = > portupgrade < > pspell = > py-gnome = > py-gtk = > py22-numeric = > python = > rep-gtk-gnome = > rpm < > ruby < > ruby-bdb1 = > ruby-fnmatch = > ruby-optparse = > sawfish-gnome = > scrollkeeper = > sharity-light = > sox = > tcl = > tiff = > tk = > unzip = > urwfonts = > xalf = > xscreensaver-gnome = > zip = > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9: 6:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 7353937B404 for ; Fri, 3 May 2002 09:06:10 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43G65YP000930; Fri, 3 May 2002 12:06:05 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: problem with evolution mail component From: Joe Marcus Clarke To: Tim Boring Cc: questions@FreeBSD.ORG In-Reply-To: <20020502181321.C1158@tim.dynofrog.com> References: <20020502181321.C1158@tim.dynofrog.com> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 12:06:05 -0400 Message-Id: <1020441965.784.17.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, 2002-05-02 at 19:13, Tim Boring wrote: > When I try to "send/receive" evo downloads the first 30 of 40 messages > then quits with this message: > > "The Evolution component that handles folders of > type 'mail' has unexpectedly quit. You will need > to quit Evolution and restart in order to access that data again." > > This is occurring on a fresh install of 4.5-Release with the Generic > kernel. After the install I restored my $HOME/evolution folder from > backup and everything was working fine...even at lunch-time today. > > In the meantime, here's what I've done to try to fix this problem: > 1. Closed evolution; ran "killev"; restarted evolution and tried > "sending/receiving" again...still hung on d/l message 30 of 40 with > same err msg. as above. > 2. Copied $HOME/evolution to $HOME/evolution.bak; then restarted to try > to recreate the account...didn't get the first-time druid, instead had > email but only inbox folder (no subfolders). still hung with above err > msg. > 3. For kicks, rebooted the machine. then when i started evo it prompted > me to complete the first-time druid. did so but still hung with above > err mesg. > > Any ideas on what's going on here? No. I have about 1400 messages in my Evo IMAP inbox, and things work fine. What version of Evo are you using? I recommend 1.0.3 for best operation. Of course, if that doesn't help, you may have to recompile Evo with debugging symbols, and try to do a core analysis to see where things are dying. Just out of curiosity, does this die on a specific message each time? Joe > > Thanks, > Tim > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9: 7:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id B088137B400 for ; Fri, 3 May 2002 09:07:10 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id A4AF4A804; Sat, 4 May 2002 02:07:07 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id A3593542D; Sat, 4 May 2002 02:07:07 +1000 (EST) Date: Sat, 4 May 2002 02:07:07 +1000 (EST) From: Andrew To: Fred Clift Cc: freebsd-questions@freebsd.org Subject: Re: filing a PR In-Reply-To: <20020503084100.X28140-100000@vespa.dmz.orem.verio.net> Message-ID: <20020504020615.B35271-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 3 May 2002, Fred Clift wrote: > Am I supposed to be getting a response from some automated tool saying my > bug has been entered? Is my bug supposed to show up in the gnats db? Yes and yes. > I've seen and heard nothing since then and I just dont know what I should > be expecting. Check your maillogs. If you resubmit make sure your from address is set correctly. Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:13:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f21.pav0.hotmail.com [64.4.32.205]) by hub.freebsd.org (Postfix) with ESMTP id 23A6537B417 for ; Fri, 3 May 2002 09:13:52 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 3 May 2002 09:13:51 -0700 Received: from 65.168.208.46 by pv0fd.pav0.hotmail.msn.com with HTTP; Fri, 03 May 2002 16:13:51 GMT X-Originating-IP: [65.168.208.46] Reply-To: matt.anderson@aecinc.com From: "Matt Anderson" To: freebsd-questions@freebsd.org Subject: smbfs from ports Date: Fri, 03 May 2002 09:13:51 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 03 May 2002 16:13:51.0957 (UTC) FILETIME=[83F31050:01C1F2BD] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello everyone! I have a 4.4 box on which I installed the smbfs port. When I try to mount a samba share I get the following: mount_smbfs: vfsload(smbfs): Exec format error Not sure where to proceed from here. Thanks Matt _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:13:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailbox-11.st1.spray.net (mailbox-11.st1.spray.net [212.78.202.111]) by hub.freebsd.org (Postfix) with ESMTP id 5481D37B41E for ; Fri, 3 May 2002 09:13:52 -0700 (PDT) Received: from p7 (spb-213-33-245-244.sovintel.ru [213.33.245.244] (may be forged)) by mailbox-11.st1.spray.net (8.8.8/8.8.8) with SMTP id SAA00517 for ; Fri, 3 May 2002 18:13:48 +0200 (MEST) Posted-Date: Fri, 3 May 2002 18:13:48 +0200 (MEST) Message-ID: <009001c1f2be$1b4e2a20$0100a8c0@p7> From: "Andrew" To: "FreeBSD-questions" Subject: Boot managing FreeBSD and X Windows Managers Date: Fri, 3 May 2002 19:36:35 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello people! Recently for the first time I has installed FreeBSD 4.5 STABLE. To accidentally not to damage information with my HDs, I has disconnected them, and on the place Primary Master has connected my oldest 2 Gb HD, and I has installed the FreeBSD to it. I used installation for "dangerous mode" of fdisk (use HD without DOS partitions). Except this HD in the system was connected CD-ROM as Primary Slave. Installation and primary testing my system pass successfully. Now I should like to restore my former computer configuration with including FreeBSD disk to use double loading my two OSs (such as Windows and FreeBSD). My disks (ATA) such it's: Primary Master - 1st HD on Windows (FAT-32); Primary Slave - CD-ROM; Secondary Master - 2th HD on broken to 4th part (FAT-16 as logical disks D, E, F, G); Secondary Slave - 3th HD for FreeBSD. I used "dangerous mode" of fdisk when installing FreeBSD that disk expressly for this on which it is installed, for was not "seen" it under Windows and possible preserve former location of logical disks under Windows. So and has occurred. (There seen by DOS-disks C:, D:, E:, F:, G: and CD-ROM - either as was previously.) I be aware of possibility to use for double loading OSs the FreeBSD bootloader or Boot Loaders third companies, for instance, System Commander (I used its repeatedly). From mans and other FreeBSD documents I know that it uses a physical location HDs, without using information BIOS and other tricks with the transposition of disks. Question now in that, will I be able do load FreeBSD when I DO NOT REINSTALLING it? From documentation I not to was able to understand that possible changing a physical location (probably, with ad0 to ad3) for my FreeBSD HD through doing a changes on FreeBSD configuration files, on which installed FreeBSD. This is my first question. The Second question: how to choose and change Windows Manager under X? Can I create several runnable desksides for using X, for instance, KDE, Gnome, AfterStep, gwm and other and load their alternately? Please, at answers cite an instance of configurations files because I is beginner on FreeBSD :-( Beforehand thanked for answers. Sincerely yours, Andrew Mikitenko To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:24:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from fep06-app.kolumbus.fi (fep06-0.kolumbus.fi [193.229.0.57]) by hub.freebsd.org (Postfix) with ESMTP id 5D44737B41E for ; Fri, 3 May 2002 09:24:37 -0700 (PDT) Received: from coat.st-paul ([212.54.20.95]) by fep06-app.kolumbus.fi with ESMTP id <20020503162435.OMTK20539.fep06-app.kolumbus.fi@coat.st-paul>; Fri, 3 May 2002 19:24:35 +0300 Received: from shoes.st-paul (shoes.st-paul [10.10.10.10]) by coat.st-paul (8.11.6/8.11.6) with ESMTP id g43GOYC73464; Fri, 3 May 2002 19:24:35 +0300 (EEST) (envelope-from juha.ylitalo@iki.fi) Received: (from jylitalo@localhost) by shoes.st-paul (8.11.6/8.11.6) id g43GOXf00334; Fri, 3 May 2002 19:24:33 +0300 (EEST) (envelope-from juha.ylitalo@iki.fi) X-Authentication-Warning: shoes.st-paul: jylitalo set sender to juha.ylitalo@iki.fi using -f Subject: Re: pkg_delete vs. make deinstall - not synced? From: Juha Ylitalo To: Bill Moran Cc: questions@FreeBSD.ORG In-Reply-To: <3CD29EE6.3060108@potentialtech.com> References: <3CD29EE6.3060108@potentialtech.com> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-SufNt//2IblMntNygZ6n" X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 20:24:33 +0400 Message-Id: <1020443073.219.5.camel@shoes.st-paul> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=-SufNt//2IblMntNygZ6n Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Fri, 2002-05-03 at 18:29, Bill Moran wrote: > I recently did a bunch of deinstalling & installing on my > system to update a whole lotta stale ports. > I'm curious. If I install from the ports, it creates a > directory in /var/db/pkg which I can then use the pkg_delete > command to remove the port. > The ports tree uses some other method to determine if the > port is installed, however. example: >=20 > 1. cd /usr/ports/devel/gmake; make install > 2. pkg_delete gmake-whatever > 3. Then try to make any port that depends on gmake When you build port, port system makes all kind of work/.phase_done.pkg-version files. If you then do pkg_delete for that particular port and try to reinstall it from port directory, it checks that you already have /usr/ports/devel/gmake/work/.install_done.gmake-version (or something like that) and for that reason it assumes that gmake has already been installed. Easiest way to properly get around this situation is to do "rm -rf work ; make install" --=20 Juha Ylitalo juha.ylitalo@iki.fi +358 40 562 6152 http://www.iki.fi/jylitalo "Some tools are used, because its policy, others because they are good." --=-SufNt//2IblMntNygZ6n Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQA80rnBT3Z0FVGK5qMRAuciAJ9bgVwwShzjxtIAxjyNCTVX17xXwQCgmVGi 3XUAG7Nga3CWJUdj+7qvgBc= =c64a -----END PGP SIGNATURE----- --=-SufNt//2IblMntNygZ6n-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:39:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id D247337B416 for ; Fri, 3 May 2002 09:39:52 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43GgMD07798 for ; Fri, 3 May 2002 18:42:22 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43GgLU07794 for ; Fri, 3 May 2002 18:42:21 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43GdpR18019 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 18:39:51 +0200 Date: Fri, 3 May 2002 18:39:51 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: smbfs from ports Message-ID: <20020503183951.A17910@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: ; from mercuryman2000@msn.com on Fri, May 03, 2002 at 09:13:51AM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 09:13, Matt Anderson spoke: > Hello everyone! > > I have a 4.4 box on which I installed the smbfs port. > > When I try to mount a samba share I get the following: > mount_smbfs: vfsload(smbfs): Exec format error Maybe you need SMBFS in the kernel config. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:53:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from blacklamb.mykitchentable.net (ekgr-dsl2-92.citlink.net [207.173.226.92]) by hub.freebsd.org (Postfix) with ESMTP id 591A037B416 for ; Fri, 3 May 2002 09:53:10 -0700 (PDT) Received: from tagalong (unknown [165.107.42.110]) by blacklamb.mykitchentable.net (Postfix) with SMTP id F35FBEE63C; Fri, 3 May 2002 09:53:03 -0700 (PDT) Message-ID: <00a201c1f2c2$fdf19610$6e2a6ba5@lc.ca.gov> From: "Drew Tomlinson" To: "Joe Marcus Clarke" Cc: References: <010101c1f206$8c69bcf0$6e2a6ba5@lc.ca.gov> <1020441810.784.14.camel@gyros.marcuscom.com> Subject: Re: Gnome Problem After Portupgrade Date: Fri, 3 May 2002 09:53:03 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Joe Marcus Clarke" To: "Drew Tomlinson" Cc: Sent: Friday, May 03, 2002 9:03 AM Subject: Re: Gnome Problem After Portupgrade > On Thu, 2002-05-02 at 15:24, Drew Tomlinson wrote: > > I attempted to use portupgrade -rR to update gnome and all of it's > > dependencies. I had a few problems along the way when portupgrade > > failed to download one of the required tarballs and left my system in an > > inconsistent state. I've worked through the issues and finally got the > > upgrade completed but receive this error (in a window) when starting > > gnome: > > > > Desk Guide Alert > > > > GNOME Desktop Guide (Pager) > > > > You are not running a GNOME Compliant Window Manager. GNOME support by > > the window manager is strongly recommended for proper Desk Guide > > Operation. > > > > I'm using Sawfish that installs with the gnome port. I've used > > pkg_deinstall to remove sawfish-gnome and then rebuilt it from ports > > using portinstall. Same error. Any ideas how to fix this short of > > rebuiling gnome in its entirety? > > Can you send me the build log from sawfish-gnome as well as a screenshot > of the error? Thanks. I'd be happy to. I'll send the build log privately to keep traffic down on the list. But how do I save the screenshot as a file? I can't get anything to run on the gnome desktop although the screensaver will kick after a while. I'll describe the window and maybe that will be enough for you to know what it looks like. I use gdm (although I'm having the same problem via startx) to log on. After the log on, the gnome 1.4 startup window appears and it seems to load normally. Once my desktop appears, the background is completly white. Both upper and lower menu bars are there and respond when clicked on. In the far upper left corner of the screen is the error window. The size of the window is such that about 12 of them would fit on the screen, 3 down and 4 across. The window is grey. If you break it into thirds, in the top third in the upper left corner of the window is a red circle with a yellow bar. In the middle of the top third is where is says "Desk Guide Alert" centered. Centered in the top of the middle third is where is says "GNOME Desktop Guide (Pager)". The bottom third of the window is where the rest of the text is in a "paragraph". At the very bottom in the right hand corner is an "OK" button. Here's a little ASCII art of the window: -------------------------------------------------- | | | (Red Circle Desk Guide Alert | | w/yellow bar) | | | | | | | | | | GNOME Desktop Guide (Pager) | | | | | | | | You are not running a GNOME Compliant | | Window Manager. GNOME support by the | | window manager is strongly recommended | | for proper Desk Guide operation. | | | |------------------------------------------------| | | | ----------------- | | | | | | | OK | | | | | | | ----------------- | -------------------------------------------------- Thanks for your help. Let me know if you need anything else. The build log will follow very shortly. Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 9:58:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.prod.itd.earthlink.net (falcon.mail.pas.earthlink.net [207.217.120.74]) by hub.freebsd.org (Postfix) with ESMTP id A298C37B417 for ; Fri, 3 May 2002 09:58:13 -0700 (PDT) Received: from pool0487.cvx19-bradley.dialup.earthlink.net ([209.179.245.232] helo=209.179.245.232) by falcon.prod.itd.earthlink.net with smtp (Exim 3.33 #2) id 173gNh-0000Vm-00 for questions@freebsd.org; Fri, 03 May 2002 09:58:12 -0700 Reply-To: Paul R.Carlson From: paulrcarl@earthlink.net To: questions@freebsd.org Cc: Subject: Disk Partioning Date: 03 May 2002 09:58:11 -0800 X-Mailer: NeoPlanet Version: 5.2.0.1704 X-ID: FD7B02E1ECEC11D28967D167B4951B1F X-Brand: NeoPlanet X-Build: 1704 Message-Id: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm attempting my first freebsd instalation...I've installed Linux (SlackWare & Mandrake) before. I can't seem to get past the Disk Partioning. I'm installing on an empty 40Gb. drive where I'd like to put FreeBSD on the first 20Gb and reserve the back 20GB for Linux. The partioning software... WindRiver 4 CD distribution simply doesn't respond to my attempts to specify 20Gb or 4500 Blocks or whatever it needs to begin partioning. Need help. Paul R. Carlson paulrcarl@earthlink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10: 3:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web14902.mail.yahoo.com (web14902.mail.yahoo.com [216.136.225.54]) by hub.freebsd.org (Postfix) with SMTP id 694E937B41A for ; Fri, 3 May 2002 10:03:08 -0700 (PDT) Message-ID: <20020503170307.51252.qmail@web14902.mail.yahoo.com> Received: from [216.234.236.167] by web14902.mail.yahoo.com via HTTP; Fri, 03 May 2002 10:03:07 PDT Date: Fri, 3 May 2002 10:03:07 -0700 (PDT) From: "david.myers" Subject: accept_filter_http To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG when i enable this and turn AcceptFilter on in apache at random stops apache will die and stop accepting connections. it doesn't core or anything just processes die off like it lost network but it hasn't. has anyone else experienced this? __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10:21:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unagi.cybernothing.org (unagi.cybernothing.org [205.158.174.211]) by hub.freebsd.org (Postfix) with ESMTP id 6B3B037B422 for ; Fri, 3 May 2002 10:20:45 -0700 (PDT) Received: from twinlark.arctic.org ([208.44.199.239]) by unagi.cybernothing.org (8.11.3/8.10.1/JDF) with ESMTP id g43HKkK69760 for ; Fri, 3 May 2002 10:20:46 -0700 (PDT) Received: (qmail 26449 invoked by uid 1347); 2 May 2002 14:45:58 -0000 Date: 2 May 2002 14:45:58 -0000 Message-ID: <20020502144558.26448.qmail@twinlark.arctic.org> From: atk2@arctic.org To: freebsd-questions@FreeBSD.ORG Subject: cat /dev/mem kills system under stable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG First I'm sending this to questions instead of stable because email to stable doesn't seem to make it there... This is just an FYI: Accessing /dev/mem via a read operation (aka cat /dev/mem or dd if=/dev/mem) hangs 4.5-stable. No panic ... To be more precise what I typed was: cat /dev/mem > /e/xxx (in case it was the disk access is related to the hang). Alan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10:23:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unagi.cybernothing.org (unagi.cybernothing.org [205.158.174.211]) by hub.freebsd.org (Postfix) with ESMTP id EB23837B4AB for ; Fri, 3 May 2002 10:22:33 -0700 (PDT) Received: from twinlark.arctic.org ([208.44.199.239]) by unagi.cybernothing.org (8.11.3/8.10.1/JDF) with ESMTP id g43HMYK69803 for ; Fri, 3 May 2002 10:22:34 -0700 (PDT) Received: (qmail 29892 invoked by uid 1347); 3 May 2002 00:20:37 -0000 Date: 3 May 2002 00:20:37 -0000 Message-ID: <20020503002037.29891.qmail@twinlark.arctic.org> From: atk2@arctic.org To: freebsd-questions@FreeBSD.ORG Subject: test Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10:24:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unagi.cybernothing.org (unagi.cybernothing.org [205.158.174.211]) by hub.freebsd.org (Postfix) with ESMTP id 524F437B4EE for ; Fri, 3 May 2002 10:23:46 -0700 (PDT) Received: from twinlark.arctic.org ([208.44.199.239]) by unagi.cybernothing.org (8.11.3/8.10.1/JDF) with ESMTP id g43HNkK69852 for ; Fri, 3 May 2002 10:23:46 -0700 (PDT) Received: (qmail 14957 invoked by uid 1347); 3 May 2002 13:40:32 -0000 Date: 3 May 2002 13:40:32 -0000 Message-ID: <20020503134032.14956.qmail@twinlark.arctic.org> From: atk2@arctic.org To: freebsd-questions@FreeBSD.ORG Subject: test Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG test message to see if we are still being filtered... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10:36:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from unagi.cybernothing.org (unagi.cybernothing.org [205.158.174.211]) by hub.freebsd.org (Postfix) with ESMTP id 18D7637B41A for ; Fri, 3 May 2002 10:36:50 -0700 (PDT) Received: from twinlark.arctic.org ([208.44.199.239]) by unagi.cybernothing.org (8.11.3/8.10.1/JDF) with ESMTP id g43HanK70385 for ; Fri, 3 May 2002 10:36:50 -0700 (PDT) Received: (qmail 21809 invoked by uid 1347); 3 May 2002 17:36:47 -0000 Date: 3 May 2002 17:36:47 -0000 Message-ID: <20020503173647.21808.qmail@twinlark.arctic.org> From: atk2@arctic.org To: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Oops - sorry Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I sort of sent multiple email (test and description of problems) because the email was being rejected by freebsd.org (aka I was sending the duplicate to see if the problem was fixed without realizing the original had been queued/saved for resend). The problem was that an upstream provider (some very large company I won't name) had messed up reverse dns lookups so the email was being silently rejected. My friend who admin this computer rerouted email I sent (and others who use this machine) to fix the problem until his net provider can get their net provider (you get the picture) to fix the dns problem... Aka sorry for the spam... Alan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 10:39: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f9.pav0.hotmail.com [64.4.33.80]) by hub.freebsd.org (Postfix) with ESMTP id 5CBBE37B416 for ; Fri, 3 May 2002 10:39:00 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 3 May 2002 10:39:00 -0700 Received: from 65.168.208.46 by pv0fd.pav0.hotmail.msn.com with HTTP; Fri, 03 May 2002 17:39:00 GMT X-Originating-IP: [65.168.208.46] Reply-To: matt.anderson@aecinc.com From: "Matt Anderson" To: freebsd-questions@freebsd.org Subject: RE: smbfs from ports Date: Fri, 03 May 2002 10:39:00 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 03 May 2002 17:39:00.0320 (UTC) FILETIME=[68C56600:01C1F2C9] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ugh, I thought I had OPTIONS SMBFS in my kernel. I Don't. Very stupid mistake. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11: 1: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from roc-66-66-72-6.rochester.rr.com (roc-66-66-72-6.rochester.rr.com [66.66.72.6]) by hub.freebsd.org (Postfix) with ESMTP id 819E137B41B for ; Fri, 3 May 2002 11:00:54 -0700 (PDT) Received: by roc-66-66-72-6.rochester.rr.com (Postfix, from userid 1000) id 02543901A00; Fri, 3 May 2002 14:00:26 -0400 (EDT) Date: Fri, 3 May 2002 14:00:26 -0400 From: mpd To: questions@freebsd.org Subject: seeking console-based mp3 player port that supports ff/rewind Message-ID: <20020503140026.A72011@rochester.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm looking for a *console-based* mp3 player that supports fast-forward and rewind. Something like what the left and right arrow keys do in mplayer. I've been using mpg123 for years, but it doesn't have this functionality. I tried mp3blaster, but it's awful. I've searched through the ports, but my criteria is a bit too specific for make search. Does anyone out there have something that can handle this? A front-end to mpg123 that supports this would be fine as well. thanks, mike -- ___________________________________________________________ "WUGGA!" - Pokey the Penguin from "WORKS LIKE A CHARM" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11: 1:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta3.srv.hcvlny.cv.net (mta3.srv.hcvlny.cv.net [167.206.5.9]) by hub.freebsd.org (Postfix) with ESMTP id 9E04A37B416 for ; Fri, 3 May 2002 11:01:32 -0700 (PDT) Received: from JEFF (ool-18b82245.dyn.optonline.net [24.184.34.69]) by mta3.srv.hcvlny.cv.net (iPlanet Messaging Server 5.0 Patch 2 (built Dec 14 2000)) with SMTP id <0GVJ00N7PRDI1B@mta3.srv.hcvlny.cv.net> for freebsd-questions@FreeBSD.ORG; Fri, 03 May 2002 14:00:55 -0400 (EDT) Date: Fri, 03 May 2002 13:59:27 -0400 From: Jeff Heath Subject: How do I shut off auto-negotiation on my NIC To: freebsd-questions@FreeBSD.ORG Message-id: MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm a newbie to BSD. Installed 4.0 GENERIC on a Dell Optiplex with a 3Com 3c905b Ethernet card. When I performed the initial installation, I selected auto-negotiation and listed 100BaseTX Full-Duplex as my first choice. Now I want to force the card to 10baseT/UTP half-duplex. I tried using ifconfig. I input the following command: ifconfig xl0 media 10baseT/UTP. Here's the output xl0: flags=8842 mtu 1500 ether 00:c0:4f:8b:93.dd media 10baseT/UTP (100baseTX ) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX I don't have any test equipment to verify for certain that the card is operating at 100baseTX , but I am very confident that this is the case. Here's why: The lights on the Linksys router I have it connected to show 100M Full-duplex operation (and when the BSD machine is plugged in there, everything works fine - I can surf the 'net, etc.) If I connect the BSD machine to my Cisco 2610 router. It won't auto-negotiate to 10MB half-duplex If I connect the BSD machine to my Win2k machine with the NIC set at 10Mb half, the BSD machine WILL auto-negotiate to 10MB. I know this to be true because I get the following output from ifconfig xl0: xl0: flags=8842 mtu 1500 ether 00:c0:4f:8b:93.dd media 10baseT/UTP status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX note the absence of the (100baseTX ) statement. Also, if I connect the BSD machine to the Cisco 2610 router after it negotiated to 10MB half-duplex, all is well. So, the REAL problem is that the Cisco 2610 router does not auto-negotiate properly. This is no surprise. I can work around my problem, but it's a nuisance, and I would like to know the proper way to completely rid myself of auto-negotiation anyway. Thanks in advance for any suggestions. Jeff Heath To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11: 9:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from foo31-146.visit.se (foo31-146.visit.se [62.119.31.146]) by hub.freebsd.org (Postfix) with ESMTP id 5068C37B41C for ; Fri, 3 May 2002 11:09:09 -0700 (PDT) Received: (from martin@localhost) by foo31-146.visit.se (8.11.6/8.11.6) id g43I8rn03950; Fri, 3 May 2002 20:08:53 +0200 (CEST) (envelope-from martin) Date: Fri, 3 May 2002 20:08:38 +0200 From: Martin Karlsson To: paulrcarl@earthlink.net Cc: questions@FreeBSD.ORG Subject: Re: Disk Partioning Message-ID: <20020503180838.GA3922@foo31-146.visit.se> Mail-Followup-To: Martin Karlsson , paulrcarl@earthlink.net, questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="k1lZvvs/B4yU6o8G" Content-Disposition: inline In-Reply-To: X-PGP-Fingerprint: 5970 BE22 2C33 4D8F 53FD 7E34 66FF 9332 9C92 4660 User-Agent: Mutt/1.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --k1lZvvs/B4yU6o8G Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * paulrcarl@earthlink.net [2002-05-03 09.58 -0800= ]: > I'm attempting my first freebsd instalation...I've installed Linux > (SlackWare & Mandrake) before. I can't seem to get past the Disk > Partioning. ok... >I'm installing on an empty 40Gb. drive where I'd like to put >FreeBSD on the first 20Gb and reserve the back 20GB for Linux. sounds good... > The partioning software... WindRiver 4 CD distribution simply > doesn't respond to my attempts to specify 20Gb or 4500 Blocks or > whatever it needs to begin partioning. Need help. Do you mean that when you press *any* key, *nothing* happens? Or do you mean that what you _expect_ to happen _doesn't_ happen? If the latter is the case, then I suggest you study the handbook: =20 and especially: =20 HTH --=20 Martin Karlsson - 0x9C924660 --k1lZvvs/B4yU6o8G Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80tIkZv+TMpySRmARAtQ8AJwPBGZfOcQfrUH1ICKIMvnP2pUg4wCgvYwB /NX40w4ppXl/H3DijKpBwR0= =A5Lo -----END PGP SIGNATURE----- --k1lZvvs/B4yU6o8G-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11:15:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 296EA37B419 for ; Fri, 3 May 2002 11:15:46 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43IFaYP023328; Fri, 3 May 2002 14:15:36 -0400 (EDT) (envelope-from marcus@marcuscom.com) Message-Id: <200205031815.g43IFaYP023328@gyros.marcuscom.com> Subject: Re: Gnome Problem After Portupgrade From: Joe Marcus Clarke To: Drew Tomlinson Cc: questions@FreeBSD.ORG In-Reply-To: <00a201c1f2c2$fdf19610$6e2a6ba5@lc.ca.gov> References: <010101c1f206$8c69bcf0$6e2a6ba5@lc.ca.gov> <1020441810.784.14.camel@gyros.marcuscom.com> <00a201c1f2c2$fdf19610$6e2a6ba5@lc.ca.gov> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 14:15:36 -0400 14 Fri May 3 10:15:36 2002 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Message-Id: <1020449736.23089.6.camel@gyros.marcuscom.com> Mime-Version: 1.0 On Fri, 2002-05-03 at 13:53, Drew Tomlinson wrote: > ----- Original Message ----- > From: "Joe Marcus Clarke" > To: "Drew Tomlinson" > Cc: > Sent: Friday, May 03, 2002 9:03 AM > Subject: Re: Gnome Problem After Portupgrade > > > > On Thu, 2002-05-02 at 15:24, Drew Tomlinson wrote: > > > I attempted to use portupgrade -rR to update gnome and all of it's > > > dependencies. I had a few problems along the way when portupgrade > > > failed to download one of the required tarballs and left my system > in an > > > inconsistent state. I've worked through the issues and finally got > the > > > upgrade completed but receive this error (in a window) when starting > > > gnome: > > > > > > Desk Guide Alert > > > > > > GNOME Desktop Guide (Pager) > > > > > > You are not running a GNOME Compliant Window Manager. GNOME support > by > > > the window manager is strongly recommended for proper Desk Guide > > > Operation. > > > > > > I'm using Sawfish that installs with the gnome port. I've used > > > pkg_deinstall to remove sawfish-gnome and then rebuilt it from ports > > > using portinstall. Same error. Any ideas how to fix this short of > > > rebuiling gnome in its entirety? > > > > Can you send me the build log from sawfish-gnome as well as a > screenshot > > of the error? Thanks. > > I'd be happy to. I'll send the build log privately to keep traffic down > on the list. But how do I save the screenshot as a file? I can't get > anything to run on the gnome desktop although the screensaver will kick > after a while. I'll describe the window and maybe that will be enough > for you to know what it looks like. > Thanks for the description, but I actually wanted to see the GUI (window decorations ,etc.). You can use the Gimp to acquire such a screenshot. xv should also work. I'll see what I can do with the build log. Joe -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11:22:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id B29EC37B420 for ; Fri, 3 May 2002 11:22:24 -0700 (PDT) Received: (qmail 4321 invoked from network); 3 May 2002 18:22:23 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-2.dial.pipex.com with SMTP; 3 May 2002 18:22:23 -0000 Subject: pgp on FreeBSD 4.5 From: "S. Roberts" Reply-To: sroberts@dsl.pipex.com To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 19:18:47 +0100 Message-Id: <1020449928.299.62.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Everyone, I'd like to find out more about using pgp to encrypt and digitally sign e-mail. In particular, I am interested in setting up my e-mail client (Evolution) to use pgp's facilities., So if anyone out there's using Evolution on FreeBSD and pgp (5), I'd appreciate your pointing me to where I can get some info on this. I did look at http://www.pgpi.org/doc/guide/5.5/en/, but there're only guides for windows and mac platforms., Thanks for the time, Stacey -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11:32:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 0331F37B400 for ; Fri, 3 May 2002 11:32:23 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43IYrx10920 for ; Fri, 3 May 2002 20:34:53 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43IYqU10911 for ; Fri, 3 May 2002 20:34:52 +0200 (CEST) Received: (from hpr@localhost) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) id g43IWLk20776 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 20:32:21 +0200 Date: Fri, 3 May 2002 20:32:21 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: cat /dev/mem kills system under stable Message-ID: <20020503203221.A20524@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20020502144558.26448.qmail@twinlark.arctic.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20020502144558.26448.qmail@twinlark.arctic.org>; from atk2@arctic.org on Thu, May 02, 2002 at 02:45:58PM -0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 02 at 14:45, atk2@arctic.org spoke: > Accessing /dev/mem via a read operation (aka cat /dev/mem or dd if=/dev/mem) > hangs 4.5-stable. No panic ... Do you want to cat the _whole_ /dev/mem? Maybe you read some registers of I/O-devices. Does it also hang with `dd if=/dev/mem count=10'? -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11:45: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.prod.itd.earthlink.net (scaup.mail.pas.earthlink.net [207.217.120.49]) by hub.freebsd.org (Postfix) with ESMTP id C1DCA37B400 for ; Fri, 3 May 2002 11:45:04 -0700 (PDT) Received: from sdn-ar-004dcwashp332.dialsprint.net ([206.133.15.238] helo=moo.holy.cow) by scaup.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173i3E-00026k-00 for freebsd-questions@freebsd.org; Fri, 03 May 2002 11:45:04 -0700 Received: by moo.holy.cow (Postfix, from userid 1001) id 7D88150BA7; Fri, 3 May 2002 14:47:36 -0400 (EDT) Date: Fri, 3 May 2002 14:47:36 -0400 From: parv To: f-q Subject: running mozilla before install Message-ID: <20020503184736.GA17807@moo.holy.cow> Mail-Followup-To: f-q Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG is there any way to test mozilla build from ${PORTSDIR}/www/mozilla/work/mozilla before installing it ? after hacking LD_LIBRARY_PATH in run-mozilla.sh to include lib{gkgfx,jsj,mozjs,xpcom}.so, i tried... $ cd /source/ports/www/mozilla/work/mozilla/build/unix $ ./run-mozilla.sh ../../xpfe/bootstrap/mozilla-bin ...which dies w/ segmentation fault. anybody else had success? what else would i need to do? - parv -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 11:55:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dot.dreamhost.com (dot.dreamhost.com [216.240.131.10]) by hub.freebsd.org (Postfix) with ESMTP id 251D137B42A for ; Fri, 3 May 2002 11:55:26 -0700 (PDT) Received: from winston.dreamhost.com (winston.dreamhost.com [216.240.131.38]) by dot.dreamhost.com (8.12.0.Beta7/8.12.0.Beta7/Debian 8.12.0.Beta7-1) with ESMTP id g43ItPg2008224; Fri, 3 May 2002 11:55:25 -0700 Received: from localhost (n74@localhost) by winston.dreamhost.com (8.11.0/8.9.3/Debian 8.9.3-21) with ESMTP id g43ItPs32042; Fri, 3 May 2002 11:55:25 -0700 X-Authentication-Warning: winston.dreamhost.com: n74 owned process doing -bs Date: Fri, 3 May 2002 18:55:25 +0000 (GMT) From: Zach Johnson X-Sender: n74@winston.dreamhost.com To: Ian Dowse Cc: freebsd-questions@FreeBSD.ORG Subject: Re: can't write-mount / to change fstab In-Reply-To: <200205030901.aa20608@salmon.maths.tcd.ie> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG You sir, are most helpful indeed. Did I mention I love you? Zach On Fri, 3 May 2002, Ian Dowse wrote: > In message , Za > ch Johnson writes: > >In single user I can SEE fstab in /etc but I can't change it since I'm > >mounted in read-only. And I can't do a mount -u / since it tells me the > >current device doesn't match fstab. And I an't do a mount -u > >/dev/foo / since it tells me that /dev/foo doesn't > >exist!! But I can't CREATE /dev/foo since / is mounted > >read-only!!! > > > >How the heck am I going to change fstab and create the dev's I need so I > >can mount the rest of my file system? > > The normal way to fix this is to use a shell from a fixit floppy > or the installation CD, but there is a trick you can use: > > mount_mfs -T fd1440 none /mnt > cd /mnt > sh /dev/MAKEDEV foo > mount -u -o rw /mnt/foo / > cd /dev > sh /dev/MAKEDEV foo > > This makes the new device node on an MFS filesystem, which is enough > to remount / read-write to create the missing device nodes. > > Ian > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12: 6:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 269F837B41C; Fri, 3 May 2002 12:06:13 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43J5m318744; Fri, 3 May 2002 15:05:49 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43K6aKZ000953; Fri, 3 May 2002 16:06:36 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 16:06:32 -0400 From: David Banning To: freebsd-questions@FreeBSD.ORG Cc: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020503160632.A89782@mail.clubplus.net> References: <20020503111257.A3919@mail.clubplus.net> <20020503180233.A16817@bsag.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503180233.A16817@bsag.ch>; from hanspeter_roth@hotmail.com on Fri, May 03, 2002 at 06:02:33PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > # kldstat; > > d Refs Address Size Name > > 1 6 0xc0000000 40000000 kernel > > 2 1 0xc1369000 a000 ibcs2.ko > > 3 1 0xc138b000 2000 rtc.ko > > 4 2 0xc138e000 14000 linux.ko > > 5 1 0xc13b3000 9000 vmmon_up.ko > > 6 1 0xc13bf000 4000 if_tap.ko > > linprocfs.ko is missing but linux.ko is present. su-2.03# cd /modules su-2.03# ls -ld lin* -r-xr-xr-x 1 root wheel 139148 Apr 26 03:42 linprocfs.ko -r-xr-xr-x 1 root wheel 1041699 Apr 26 03:42 linux.ko > Can you load linprocfs by kldload? su-2.03# kldload linprocfs kldload: can't load linprocfs: Exec format error > Maybe linux_enable is required in /etc/rc.conf. It is; # This file now contains just the overrides from /etc/defaults/rc.conf # please make all changes to this file. ifconfig_rl0="209.188.66.29" linux_enable="YES" ibcs2_enable="YES" svr4_enable="YES" Still baffled - To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12: 6:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 269F837B41C; Fri, 3 May 2002 12:06:13 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43J5m318744; Fri, 3 May 2002 15:05:49 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43K6aKZ000953; Fri, 3 May 2002 16:06:36 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 16:06:32 -0400 From: David Banning To: freebsd-questions@FreeBSD.ORG Cc: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020503160632.A89782@mail.clubplus.net> References: <20020503111257.A3919@mail.clubplus.net> <20020503180233.A16817@bsag.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503180233.A16817@bsag.ch>; from hanspeter_roth@hotmail.com on Fri, May 03, 2002 at 06:02:33PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > # kldstat; > > d Refs Address Size Name > > 1 6 0xc0000000 40000000 kernel > > 2 1 0xc1369000 a000 ibcs2.ko > > 3 1 0xc138b000 2000 rtc.ko > > 4 2 0xc138e000 14000 linux.ko > > 5 1 0xc13b3000 9000 vmmon_up.ko > > 6 1 0xc13bf000 4000 if_tap.ko > > linprocfs.ko is missing but linux.ko is present. su-2.03# cd /modules su-2.03# ls -ld lin* -r-xr-xr-x 1 root wheel 139148 Apr 26 03:42 linprocfs.ko -r-xr-xr-x 1 root wheel 1041699 Apr 26 03:42 linux.ko > Can you load linprocfs by kldload? su-2.03# kldload linprocfs kldload: can't load linprocfs: Exec format error > Maybe linux_enable is required in /etc/rc.conf. It is; # This file now contains just the overrides from /etc/defaults/rc.conf # please make all changes to this file. ifconfig_rl0="209.188.66.29" linux_enable="YES" ibcs2_enable="YES" svr4_enable="YES" Still baffled - To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12:18:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.rdc-kc.rr.com (mkc-162-200.kc.rr.com [24.94.162.200]) by hub.freebsd.org (Postfix) with ESMTP id 8CC8E37B41A for ; Fri, 3 May 2002 12:18:09 -0700 (PDT) Received: from pop-server.wi.rr.com (mke-65-31-95-21.wi.rr.com [65.31.95.21]) by smtp1.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g43JI5pt014633 for ; Fri, 3 May 2002 14:18:06 -0500 (CDT) Date: Fri, 3 May 2002 14:18:14 -0500 From: Nick Lozinsky To: freebsd-questions@freebsd.org Subject: mutt: what's with the users? Message-ID: <20020503141814.A1092@wi.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've installed mutt, and it works, finally; along with fetchmail, but, the only way I can mail from mutt, is if I create a local user that has the same handle as the mail account that my ISP's mail account that I'm using, and if I name my box the same domain name as my ISP's domain name. If I change these parameters to anything else, I get an error, regarding a Child Error 127; Im assuming this has to do with sendmail, does this have to do with the -oem -oi args or is these aliasing, or forwarding in- volved? Please enlighten. Thank you. Nick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12:33:42 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 5133737B41B for ; Fri, 3 May 2002 12:33:40 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43JXG320043 for ; Fri, 3 May 2002 15:33:16 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43KY4Os004407 for questions@freebsd.org; Fri, 3 May 2002 16:34:04 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 16:34:03 -0400 From: David Banning To: questions@freebsd.org Subject: mozilla - no text entry appears Message-ID: <20020503163403.A4378@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I just compiled mozilla from the ports and it seems to operate OK other than the text does not appear in search boxes. The text will simply not enter. I have an idea that this is a font thing. I notice that I -can- enter into the search field on google, but Yahoo's search box, which I think is one font size smaller will not allow entry. I tried modifying the font size in Mozilla preferences, but there are not options that come up other than the ones installed. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12:46: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp-relay.wholefoods.com (smtp-relay.wholefoods.com [64.132.0.23]) by hub.freebsd.org (Postfix) with ESMTP id 831FD37B41F for ; Fri, 3 May 2002 12:45:50 -0700 (PDT) Received: from wfm-scan. (wfm-scan.wholefoods.com [10.1.1.112]) by smtp-relay.wholefoods.com (8.11.5/8.11.5) with SMTP id g43JiJc24698 for ; Fri, 3 May 2002 14:44:19 -0500 (CDT) Received: from wholefoods.com ([10.1.6.139]) by wfm-scan. (NAVGW 2.5.1.19) with SMTP id M2002050314422906470 for ; Fri, 03 May 2002 14:42:29 -0500 Message-ID: <3CD2E8D1.1040100@wholefoods.com> Date: Fri, 03 May 2002 14:45:21 -0500 From: Rob King User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020426 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Possible bug in miibus, fxp, and xl? Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey everyone, Sorry if this has been answered elsewhere, but I'm not seeing it...And thanks in advance for any help. I'm running 4.5-RELEASE, i386 on a Dell server box. The machine keeps locking up whenever I do large network transfers. At first I thought it was a problem with the on-motherboard ethernet card (xl0), but when I put an fxp-driven card in, and removed kernel support for xl0, it still locks up on large network transfers. This doesn't appear to be a cooling issue, but the only common piece of code is the miibus driver code. Anyone have any ideas? Thanks a lot, Rob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 12:55:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dcs-vaio.turner.com (atl190.turner.com [64.236.240.190]) by hub.freebsd.org (Postfix) with ESMTP id 26B2937B400 for ; Fri, 3 May 2002 12:55:33 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by dcs-vaio.turner.com (8.11.6/8.11.6) with ESMTP id g43JtRM10758 for ; Fri, 3 May 2002 15:55:27 -0400 (EDT) (envelope-from dsnyder@web.turner.com) Date: Fri, 3 May 2002 15:55:27 -0400 (EDT) From: "David C. Snyder" X-X-Sender: dsnyder@dcs-vaio.turner.com To: questions@freebsd.org Subject: Installing without VGA or Keyboard Message-ID: <20020503154605.T10738-100000@dcs-vaio.turner.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I would like to install FreeBSD from CD-ROM onto servers using only the serial port (i.e., no VGA or keyboard). I was surprised to find that the default installation ISO image does not support this by default. I customized the image slightly by grafting in a /boot.config containing "-P" onto the CD image, but the boot loader on the CD seemed to ignore that. My third attempt involved adding "set console=comconsole" to /boot/loader.rc on the CD. That didn't work either, so I'm in the middle of testing a /boot/loader.conf.local that contains "console=comconsole". As I write this, another thought crossed my mind. Perhaps I should be adding this stuff to the /floppies/boot.img image instead of /boot on the CD. I'll try that next, but if you have any suggestions, I'd love to hear them. Thanks. David C. Snyder CNN - Internet Technologies Desk: 404 827 1679 Nextel ID: 46 Cell: 770 616 0080 Pager: david_snyder@imcingular.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:18:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rpi.edu (mail.rpi.edu [128.113.22.40]) by hub.freebsd.org (Postfix) with ESMTP id F0C8837B417 for ; Fri, 3 May 2002 13:18:44 -0700 (PDT) Received: from [128.113.24.47] (gilead.netel.rpi.edu [128.113.24.47]) by mail.rpi.edu (8.12.1/8.12.1) with ESMTP id g43KIVsa057454; Fri, 3 May 2002 16:18:34 -0400 Mime-Version: 1.0 X-Sender: drosih@mail.rpi.edu Message-Id: In-Reply-To: <0GVH00HP3VY75C@email.telnor.net> References: <0GVH00HP3VY75C@email.telnor.net> Date: Fri, 3 May 2002 16:18:29 -0400 To: tornadox@telnor.net, freebsd-questions@FreeBSD.ORG From: Garance A Drosihn Subject: Re: vmware ask for init directories Content-Type: text/plain; charset="us-ascii" ; format="flowed" X-Scanned-By: MIMEDefang 2.3 (www dot roaringpenguin dot com slash mimedefang) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 10:58 AM -0700 5/2/02, jehova wrote: >i'm installing vmware3.1 and installer ask for where >are init directories(!?): > >What is the directory that contains the init directories >(rc0.d/ to rc6.d/)? Note that we do not have a 'port' for vmware version 3. We only have it for vmware (version 1) and vmware2. You would need to have a pretty good understanding of what is going on with vmware internals and freebsd to get vmware version 3 up and running. -- Garance Alistair Drosehn = gad@gilead.netel.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:32:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 3779B37B419 for ; Fri, 3 May 2002 13:32:37 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43KWKYP073228; Fri, 3 May 2002 16:32:20 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: running mozilla before install From: Joe Marcus Clarke To: parv Cc: f-q In-Reply-To: <20020503184736.GA17807@moo.holy.cow> References: <20020503184736.GA17807@moo.holy.cow> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 16:32:20 -0400 Message-Id: <1020457940.84489.7.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 14:47, parv wrote: > is there any way to test mozilla build from > ${PORTSDIR}/www/mozilla/work/mozilla before installing it ? > > after hacking LD_LIBRARY_PATH in run-mozilla.sh to include > lib{gkgfx,jsj,mozjs,xpcom}.so, i tried... > > $ cd /source/ports/www/mozilla/work/mozilla/build/unix > $ ./run-mozilla.sh ../../xpfe/bootstrap/mozilla-bin > > ...which dies w/ segmentation fault. anybody else had success? > what else would i need to do? Take a look at the mozilla wrapper script. You'll probably need to set MOZILLA_FIVE_HOME as well as LD_LIBRARY_PATH. Joe > > > - parv > > -- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:34:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id 3FB4537B41B for ; Fri, 3 May 2002 13:34:16 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43KXwYP075063; Fri, 3 May 2002 16:33:59 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: mozilla - no text entry appears From: Joe Marcus Clarke To: David Banning Cc: questions@FreeBSD.ORG In-Reply-To: <20020503163403.A4378@mail.clubplus.net> References: <20020503163403.A4378@mail.clubplus.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 16:33:58 -0400 Message-Id: <1020458039.84489.10.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 16:34, David Banning wrote: > I just compiled mozilla from the ports and it seems to > operate OK other than the text does not appear in > search boxes. The text will simply not enter. > > I have an idea that this is a font thing. > I notice that I -can- enter into the search field > on google, but Yahoo's search box, which I think is > one font size smaller will not allow entry. I tried > modifying the font size in Mozilla preferences, but there are > not options that come up other than the ones installed. I'm not seeing this problem. What version of Mozilla are you using? What version of XFree86? Do you have /usr/X11R6/lib/X11/fonts/misc in your FontPath? I'm using Mozilla 1.0.rc1 under XFree86 4.2.0 on 4.6-PRE just fine. Joe > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:44:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id B3DE837B416 for ; Fri, 3 May 2002 13:44:28 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43KkwP13869 for ; Fri, 3 May 2002 22:46:58 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43KkvU13865 for ; Fri, 3 May 2002 22:46:57 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g43KiQ123222 for ; Fri, 3 May 2002 22:44:26 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g43KiQN39907 for questions@FreeBSD.ORG; Fri, 3 May 2002 22:44:26 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Fri, 3 May 2002 22:44:26 +0200 From: Hanspeter Roth To: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020503224426.A39765@bsag.ch> Reply-To: questions@FreeBSD.ORG Mail-Followup-To: questions@FreeBSD.ORG References: <20020503111257.A3919@mail.clubplus.net> <20020503180233.A16817@bsag.ch> <20020503160632.A89782@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503160632.A89782@mail.clubplus.net>; from david@skytrackercanada.com on Fri, May 03, 2002 at 04:06:32PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 16:06, David Banning spoke: > > Maybe linux_enable is required in /etc/rc.conf. > > It is; > > # This file now contains just the overrides from /etc/defaults/rc.conf > # please make all changes to this file. > ifconfig_rl0="209.188.66.29" > linux_enable="YES" Sorry. I disabled linux on my box but the linprocfs loads nevertheless. It seems you have upgrade the kernel to 4.5Stable. I don't know whether modules are impacted by the userland programs. Just curious: have you also made installworld? Are there strange boot message near `additional ABI support:'? (ScrollLock PgUp) Does `ls /proc` look reasonable? Is /compat/linux/proc a directory? I have linux_base-6.1 port installed. But I don't know whether it's required for linprocfs. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:49:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts6-srv.bellnexxia.net (tomts6.bellnexxia.net [209.226.175.26]) by hub.freebsd.org (Postfix) with ESMTP id 31C7837B41B for ; Fri, 3 May 2002 13:49:51 -0700 (PDT) Received: from sympatico ([65.93.196.25]) by tomts6-srv.bellnexxia.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020503204945.RGUS22413.tomts6-srv.bellnexxia.net@sympatico> for ; Fri, 3 May 2002 16:49:45 -0400 Message-ID: <000801c1f2e4$75cb2f40$0400a8c0@ca.sympatico.ca> From: "Gengis Khan" To: Subject: Allo Date: Fri, 3 May 2002 16:52:37 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1F2C2.EE54DA00" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1F2C2.EE54DA00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Savez-vous ou pourrais-je trouver de la documentation sur named, BIND en = fran=E7ais ? merci ------=_NextPart_000_0005_01C1F2C2.EE54DA00 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Savez-vous ou pourrais-je trouver de la = documentation sur named, BIND en fran=E7ais ?
 
 
merci
------=_NextPart_000_0005_01C1F2C2.EE54DA00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:52:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 884CE37B405 for ; Fri, 3 May 2002 13:52:05 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43KpZ325162; Fri, 3 May 2002 16:51:35 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43LqN4G004734; Fri, 3 May 2002 17:52:23 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 17:52:23 -0400 From: David Banning To: Joe Marcus Clarke Cc: questions@freebsd.org Subject: Re: mozilla - no text entry appears Message-ID: <20020503175223.A4705@mail.clubplus.net> References: <20020503163403.A4378@mail.clubplus.net> <1020458039.84489.10.camel@gyros.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1020458039.84489.10.camel@gyros.marcuscom.com>; from marcus@marcuscom.com on Fri, May 03, 2002 at 04:33:58PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 04:33:58PM -0400, Joe Marcus Clarke wrote: > On Fri, 2002-05-03 at 16:34, David Banning wrote: > > I just compiled mozilla from the ports and it seems to > > operate OK other than the text does not appear in > > search boxes. The text will simply not enter. > > > > I have an idea that this is a font thing. > > I notice that I -can- enter into the search field > > on google, but Yahoo's search box, which I think is > > one font size smaller will not allow entry. I tried > > modifying the font size in Mozilla preferences, but there are > > not options that come up other than the ones installed. > > I'm not seeing this problem. What version of Mozilla are you using? mozilla-1.0.rc1,1 > What version of XFree86? XFree86-4.0.3_3 Do you have /usr/X11R6/lib/X11/fonts/misc in > your FontPath? How do I do that? I did not see that as part of the install. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:56:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 95AFA37B404 for ; Fri, 3 May 2002 13:56:16 -0700 (PDT) Received: (qmail 28916 invoked from network); 3 May 2002 20:56:15 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-2.dial.pipex.com with SMTP; 3 May 2002 20:56:15 -0000 Subject: Error upgrading ImageMagick-5.4.4 with portupgrade From: "S. Roberts" Reply-To: sroberts@dsl.pipex.com To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 21:52:40 +0100 Message-Id: <1020459161.299.71.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've just run portupgrade for ImageMagick-5.4.4 and got the errors below. # portupgrade -R ImageMagick-5.4.4 ---> Upgrading 'ImageMagick-5.4.4' to 'ImageMagick-5.4.4.5' (graphics/ImageMagick) ---> Building '/usr/ports/graphics/ImageMagick' ===> Cleaning for libiconv-1.7_4 ===> Cleaning for bison-1.35_1 ===> Cleaning for gettext-0.11.1_2 ===> Cleaning for gmake-3.79.1_1 ===> Cleaning for libtool-1.3.4_3 ===> Cleaning for pkgconfig-0.12.0 ===> Cleaning for jbigkit-1.2 ===> Cleaning for jpeg-6b_1 ===> Cleaning for lcms-1.08 ===> Cleaning for libfpx-1.2.0.4 ===> Cleaning for libmpeg2-0.2.1 ===> Cleaning for libwmf-0.2.2_1 ===> Cleaning for png-1.2.2_1 ===> Cleaning for tiff-3.5.7 ===> Cleaning for python-2.2.1 ===> Cleaning for freetype2-2.0.9 ===> Cleaning for ghostscript-gnu-7.05 ===> Cleaning for libxml2-2.4.21 ===> Cleaning for XFree86-3.3.6_11 ===> Cleaning for ImageMagick-5.4.4.5 >> ImageMagick-5.4.4-5.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> Attempting to fetch from http://imagemagick.sourceforge.net/http/. Receiving ImageMagick-5.4.4-5.tar.gz (3897910 bytes): 100% 3897910 bytes transferred in 95.4 seconds (39.91 kBps) ===> Extracting for ImageMagick-5.4.4.5 >> Checksum mismatch for ImageMagick-5.4.4-5.tar.gz. Make sure the Makefile and distinfo file (/usr/ports/graphics/ImageMagick/distinfo) are up to date. If you are absolutely sure you want to override this check, type "make NO_CHECKSUM=yes [other args]". *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. ** Command failed: make ** Fix the problem and try again. ** The following packages were not installed or upgraded (*:skipped / !:failed) ! graphics/ImageMagick (ImageMagick-5.4.4) (checksum mismatch) # I attempted to verify the checksums as mentioned at the end of the error message, but couldn't determine what it is I'm supposed to be looking for (two files below. Could someone please assist me in resolving this? Thanks to all that might respond. Stacey #cat distinfo MD5 (ImageMagick-5.4.4-5.tar.gz) = 210158dddeb73d26dec21220ef57ad7c # # cat Makefile # New ports collection makefile for: ImageMagick # Date created: 15 November 1994 # Whom: torstenb # # $FreeBSD: ports/graphics/ImageMagick/Makefile,v 1.138 2002/05/02 22:24:20 pat Exp $ # PORTNAME= ImageMagick PORTVERSION= 5.4.4.5 CATEGORIES= graphics perl5 MASTER_SITES= http://imagemagick.sourceforge.net/http/ \ ftp://ftp.yggdrasil.com/mirrors/site/ftp.simplesystems.org/pub/%SUBDIR%/ \ ftp://gd.tuwien.ac.at/pub/graphics/%SUBDIR%/ \ ftp://ftp.sunet.se/pub/multimedia/graphics/%SUBDIR%/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,graphics/ImageMagick,} \ ftp://ftp.crc.ca/pub/packages/graphics/imagemagick/ \ ftp://ftp.imagemagick.org/pub/%SUBDIR%/ \ ftp://ftp.planetmirror.com/pub/%SUBDIR%/ \ ftp://ftp.fu-berlin.de/unix/X11/graphics/%SUBDIR%/ \ ftp://zoffy.asahi-net.or.jp/pub/graphics/%SUBDIR%/ \ ftp://ftp.u-aizu.ac.jp/pub/graphics/image/%SUBDIR%/ \ ftp://ftp.eos.hokudai.ac.jp/pub/graphics/%SUBDIR%/ \ ftp://ftp.kddlabs.co.jp/graphics/%SUBDIR%/ \ ftp://ftp.icm.edu.pl/pub/graphics/%SUBDIR%/ \ ftp://giswitch.sggw.waw.pl/pub/graphics/%SUBDIR%/ \ ftp://ftp.fifi.org/pub/%SUBDIR%/ \ ftp://ftp.simplesystems.org/pub/%SUBDIR%/ MASTER_SITE_SUBDIR= ${PORTNAME} DISTNAME= ${PORTNAME}-${PORTVERSION:R}-${PORTVERSION:E} MAINTAINER= ports@FreeBSD.org BUILD_DEPENDS= freetype-config:${PORTSDIR}/print/freetype2 # XXX LIB_DEPENDS= fpx.1:${PORTSDIR}/graphics/libfpx \ jbig.1:${PORTSDIR}/graphics/jbigkit \ jpeg.9:${PORTSDIR}/graphics/jpeg \ lcms.1:${PORTSDIR}/graphics/lcms \ png.5:${PORTSDIR}/graphics/png \ tiff.4:${PORTSDIR}/graphics/tiff \ freetype.9:${PORTSDIR}/print/freetype2 \ xml2.5:${PORTSDIR}/textproc/libxml2 .if !exists(/usr/bin/bzip2) LIB_DEPENDS+= bz2.1:${PORTSDIR}/archivers/bzip2 .endif WRKSRC= ${WRKDIR}/${PORTNAME}-${PORTVERSION:R} USE_GCC295= yes USE_PERL5= yes USE_GMAKE= yes USE_LIBTOOL= yes LIBTOOLFLAGS= # none CONFIGURE_TARGET= --build=${ARCH}-portbld-freebsd${OSREL} CONFIGURE_ENV= CPPFLAGS="${CPPFLAGS}" LDFLAGS="${LDFLAGS}" CONFIGURE_ARGS= --enable-shared --with-perl=${PERL5} \ --without-gslib --without-hdf --without-jp2 INSTALLS_SHLIB= yes MAN1= ImageMagick.1 Magick++-config.1 Magick-config.1 \ composite.1 conjure.1 convert.1 identify.1 mogrify.1 montage.1 MAN3= Image::Magick.3 MAN4= miff.4 MAN5= quantize.5 MAN3PREFIX= ${PREFIX}/lib/perl5/${PERL_VERSION} CPPFLAGS= -I${LOCALBASE}/include LDFLAGS= -L${LOCALBASE}/lib # PerlMagick not works with threads, if perl is not threaded, and vice versa .if defined(WITH_IMAGEMAGICK_THREADS) || \ defined(PERL_THREADED) && ${PERL_THREADED} == "true" CONFIGURE_ARGS+= --with-threads CPPFLAGS+= ${PTHREAD_CFLAGS} LDFLAGS+= ${PTHREAD_LIBS} .else CONFIGURE_ARGS+= --without-threads .endif # Faster, but poor quality .if defined(WITHOUT_IMAGEMAGICK_16BIT_PIXEL) CONFIGURE_ARGS+= --disable-16bit-pixel .endif # Produce standard (small) GIFs .if defined(HAVE_UNISYS_LICENSE) CONFIGURE_ARGS+= --enable-lzw .endif # Loadable coders, smaller executable, but PerlMagick not really works # ('make test' there works) .if defined(WITH_IMAGEMAGICK_MODULES) LIB_DEPENDS+= ltdl.1:${PORTSDIR}/devel/libtool CONFIGURE_ARGS+= --with-modules PLIST_SUB+= MODULES='' .else PLIST_SUB+= MODULES='@comment ' .endif .if defined(WITHOUT_X11) PKGNAMESUFFIX+= -nox11 BUILD_DEPENDS+= gs:${PORTSDIR}/print/ghostscript-gnu-nox11 RUN_DEPENDS+= gs:${PORTSDIR}/print/ghostscript-gnu-nox11 CONFIGURE_ARGS+= --without-x --without-mpeg2 --without-wmf PLIST_SUB+= X11='@comment ' .else LIB_DEPENDS+= mpeg2.0:${PORTSDIR}/graphics/libmpeg2 \ wmf.2:${PORTSDIR}/graphics/libwmf BUILD_DEPENDS+= gs:${PORTSDIR}/print/ghostscript-gnu RUN_DEPENDS+= gs:${PORTSDIR}/print/ghostscript-gnu USE_XLIB= yes MAN1+= animate.1 display.1 import.1 PLIST_SUB+= X11='' .endif .if defined(NOPORTDOCS) INSTALL_TARGET= install .else INSTALL_TARGET= install install-data-html .endif pre-patch: @${PERL} -pi -e 's|-lpthread|-lc_r|g ; \ s|LIBLTDL=.*$$|LIBLTDL="-lltdl"|g ; \ s|INCLTDL=.*$$|INCLTDL=|g ; \ s|lcms/lcms.h|lcms.h|g ; \ s|lcms_lcms_h|lcms_h|g' ${WRKSRC}/configure @${FIND} ${WRKSRC} -name "Makefile.in" | ${XARGS} ${PERL} -pi -e \ 's|top_builddir\)/ltdl/libltdlc.la|LIBLTDL\)|g ; \ s|pkgdocdir =.*$$|pkgdocdir = ${DOCSDIR}/|g ; \ s| install-data-html||g' @${PERL} -pi -e 's|lcms/lcms.h|lcms.h|g' ${WRKSRC}/magick/transform.c @${PERL} -pi -e 's|||g' ${WRKSRC}/ltdl/ltdl.c @${PERL} -pi -e 's|timestamp: %ld|timestamp: %d|g' \ ${WRKSRC}/magick/xwindow.c .include # -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:57:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mithrandir.codesorcery.net (cm-24-161-30-31.nycap.rr.com [24.161.30.31]) by hub.freebsd.org (Postfix) with ESMTP id B1BBA37B41A for ; Fri, 3 May 2002 13:57:53 -0700 (PDT) Received: from incanus by mithrandir.codesorcery.net with local (Exim 3.35 #1 (Debian)) id 173k7i-0002pk-00 for ; Fri, 03 May 2002 16:57:50 -0400 Date: Fri, 3 May 2002 16:57:50 -0400 From: "Justin R. Miller" To: freebsd-questions@FreeBSD.ORG Subject: Re: Allo Message-ID: <20020503205750.GA9416@mithrandir.codesorcery.net> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <000801c1f2e4$75cb2f40$0400a8c0@ca.sympatico.ca> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="h31gzZEtNLTqOjlF" Content-Disposition: inline In-Reply-To: <000801c1f2e4$75cb2f40$0400a8c0@ca.sympatico.ca> User-Agent: Mutt/1.3.28i X-OpenPGP-Key: http://codesorcery.net/pubkey.html Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Said Gengis Khan on Fri, May 03, 2002 at 04:52:37PM -0400: > Savez-vous ou pourrais-je trouver de la documentation sur named, BIND > en fran=E7ais ? http://www.ibiblio.org/pub/Linux/docs/HOWTO/translations/fr/a-jour/html/DNS= -HOWTO-html.tar.gz --=20 [!] Justin R. Miller Encrypted email preferred (key 0xC9C40C31) --h31gzZEtNLTqOjlF Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE80vnO94d6K8nEDDERAhWtAKCFlY7RwtnH1CLVAN/5AHCTq5e6OwCfYCj/ 7x6r0tymPZ4oGd08cmayUXM= =Ov2d -----END PGP SIGNATURE----- --h31gzZEtNLTqOjlF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 13:58:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from [12.162.34.13] (dnsmom.beanstalk.net [12.162.34.13]) by hub.freebsd.org (Postfix) with ESMTP id 7EF4837B41B for ; Fri, 3 May 2002 13:58:08 -0700 (PDT) Received: from beanstalk.net (unverified [12.162.34.16]) by (Vircom SMTPRS 4.2.181) with SMTP id for ; Fri, 3 May 2002 16:56:38 -0400 From: ptfd9100@beanstalk.net Reply-To: ptfd9100@beanstalk.net To: freebsd-questions@FreeBSD.ORG Date: Fri, 03 May 2002 15:50:49 -0500 Subject: Re: Kernel compile fails 4.5R X-Mailer: CWMail Web to Mail Gateway 2.6k, http://netwinsite.com/top_mail.htm Message-id: <3cd2f9cd.484.0@beanstalk.net> X-User-Info: 129.74.233.55 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I think Monday I'll replace the CPU, I have another PP200 as I bought a mathced pair when I got this one. If that doesn't correct, (I don't think it's the cpu, p/b RAM) I'll have to do some SIMM swapping and try to locate th eprob. Mike > On May 02 at 18:30, Kris Kennaway spoke: > >> On Thu, May 02, 2002 at 11:02:50AM -0400, Michael W.Holdeman wrote: >> >> > make ( always fails, different messages EACH time. Sometimes talkling about >> > white spaces in files?, other times talking about invalid pipes, or kernel >> > panics?) >> >> This is a dead giveaway that you have malfunctioning hardware. >> >> CPU cooling and bad RAM are the two main causes, but it could also >> be other problems. > >Michael: > >you might try to underclock the CPU > > >-Hanspeter > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14: 2: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 4CDA637B41C for ; Fri, 3 May 2002 14:01:58 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g43L4Sa14318 for ; Fri, 3 May 2002 23:04:28 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g43L4SU14314 for ; Fri, 3 May 2002 23:04:28 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g43L1v123638 for ; Fri, 3 May 2002 23:01:57 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g43L1uN39976 for freebsd-questions@FreeBSD.ORG; Fri, 3 May 2002 23:01:56 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Fri, 3 May 2002 23:01:56 +0200 From: Hanspeter Roth To: freebsd-questions@FreeBSD.ORG Subject: Re: mutt: what's with the users? Message-ID: <20020503230156.A39916@bsag.ch> Reply-To: freebsd-questions@FreeBSD.ORG Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <20020503141814.A1092@wi.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503141814.A1092@wi.rr.com>; from nl3481@wi.rr.com on Fri, May 03, 2002 at 02:18:14PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 03 at 14:18, Nick Lozinsky spoke: > Hi, > > I've installed mutt, and it works, finally; along with fetchmail, > but, the only way I can mail from mutt, is if I create a local > user that has the same handle as the mail account that my ISP's > mail account that I'm using, and if I name my box the same domain > name as my ISP's domain name. If I change these parameters to > anything else, I get an error, regarding a Child Error 127; Have your tried: my_hdr From: Nick Lozinsky You may put this in a send-hook in case you also want to mail locallly. > Im assuming this has to do with sendmail, does this have to do > with the -oem -oi args or is these aliasing, or forwarding in- > volved? You may also need to set envelope_from or something like: set sendmail="/usr/sbin/sendmail -U -oem -oi -fnl3481@wi.rr.com" > > Please enlighten. You may consider asking on the mutt-users list. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14: 5:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (dhcp-64-102-60-52.cisco.com [64.102.60.52]) by hub.freebsd.org (Postfix) with ESMTP id A423337B405 for ; Fri, 3 May 2002 14:05:31 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g43L5PQQ000349; Fri, 3 May 2002 17:05:25 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: mozilla - no text entry appears From: Joe Marcus Clarke To: David Banning Cc: questions@freebsd.org In-Reply-To: <20020503175223.A4705@mail.clubplus.net> References: <20020503163403.A4378@mail.clubplus.net> <1020458039.84489.10.camel@gyros.marcuscom.com> <20020503175223.A4705@mail.clubplus.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 17:05:25 -0400 Message-Id: <1020459925.299.1.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 17:52, David Banning wrote: > On Fri, May 03, 2002 at 04:33:58PM -0400, Joe Marcus Clarke wrote: > > On Fri, 2002-05-03 at 16:34, David Banning wrote: > > > I just compiled mozilla from the ports and it seems to > > > operate OK other than the text does not appear in > > > search boxes. The text will simply not enter. > > > > > > I have an idea that this is a font thing. > > > I notice that I -can- enter into the search field > > > on google, but Yahoo's search box, which I think is > > > one font size smaller will not allow entry. I tried > > > modifying the font size in Mozilla preferences, but there are > > > not options that come up other than the ones installed. > > > > I'm not seeing this problem. What version of Mozilla are you using? > mozilla-1.0.rc1,1 > > > What version of XFree86? > XFree86-4.0.3_3 You might want to consider upgrading to 4.2.0. > > > Do you have /usr/X11R6/lib/X11/fonts/misc in > > your FontPath? > How do I do that? I did not see that as part of the install. In your XF86Config, you need to have /usr/X11R6/lib/X11/fonts/misc defined as a FontPath element. As well, you need /usr/X11R6/lib/X11/fonts/misc to exist, and have fonts.alias and fonts.dir files. Joe > > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:12:22 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pintail.mail.pas.earthlink.net (pintail.mail.pas.earthlink.net [207.217.120.122]) by hub.freebsd.org (Postfix) with ESMTP id 0B9E637B417 for ; Fri, 3 May 2002 14:12:18 -0700 (PDT) Received: from sdn-ar-004dcwashp332.dialsprint.net ([206.133.15.238] helo=moo.holy.cow) by pintail.mail.pas.earthlink.net with esmtp (Exim 3.33 #2) id 173kLd-0000Vh-00; Fri, 03 May 2002 14:12:13 -0700 Received: by moo.holy.cow (Postfix, from userid 1001) id 2FE4850BB0; Fri, 3 May 2002 17:14:45 -0400 (EDT) Date: Fri, 3 May 2002 17:14:45 -0400 From: parv To: Clint Olsen Cc: questions@freebsd.org Subject: Re: Perl 5.6.1 port failed make test Message-ID: <20020503211444.GA19743@moo.holy.cow> References: <20020503043712.GA12423@0lsen.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020503043712.GA12423@0lsen.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG in message <20020503043712.GA12423@0lsen.net>, wrote Clint Olsen thusly... > > pragma/locale........# The following locales > # > # The following locales > # > # de_AT.ISO8859-15 de_CH.ISO8859-15 de_DE.ISO8859-15 > # en_AU.ISO8859-15 en_CA.ISO8859-15 en_GB.ISO8859-15 > # en_NZ.ISO8859-15 en_US.ISO8859-15 fi_FI.ISO8859-15 > # it_CH.ISO8859-15 it_IT.ISO8859-15 lt_LT.ISO8859-4 nl_BE.ISO8859-15 > # nl_NL.ISO8859-15 no_NO.ISO8859-15 sv_SE.ISO8859-15 > # > # had problems. see... http://www.freebsd.org/cgi/query-pr.cgi?pr=34308 http://bugs.perl.org/perlbug.cgi?req=bidmid&bidmid=20020212.002 -- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:16:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 68AF137B41A for ; Fri, 3 May 2002 14:16:09 -0700 (PDT) Received: from barbish ([63.70.155.120]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Fri, 3 May 2002 17:16:04 -0400 From: "Joe & Fhe Barbish" To: "FBSDQ" Subject: Runing games behind gateway with private ip address. Date: Fri, 3 May 2002 17:16:03 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have FBSD configured as gateway with private ip address for Lan with 2 win98 workstations. I use user ppp with -Nat to dial out to my ISP using external modem. This environment work fine for all internet sessions from the lan except for games. When I try to play a game that connects to the internet to play against other players the game just hangs after making contact with the game server. When I test the win98 workstation by having it dials out to the internet direct using it's own modem, the game plays correctly. It's like the game knows the workstation's ip address is being Nat as it passes through the FBSD gateway. How do I go about faking out the lan Win98 workstation so it thinks it has an public ip address? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:21:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from foo31-146.visit.se (foo31-146.visit.se [62.119.31.146]) by hub.freebsd.org (Postfix) with ESMTP id E1DF137B419 for ; Fri, 3 May 2002 14:21:51 -0700 (PDT) Received: (from martin@localhost) by foo31-146.visit.se (8.11.6/8.11.6) id g43LLkQ00955; Fri, 3 May 2002 23:21:46 +0200 (CEST) (envelope-from martin) Date: Fri, 3 May 2002 23:21:46 +0200 From: Martin Karlsson To: paulrcarl@earthlink.net Cc: freebsd-questions@freebsd.org Subject: Re: Disk Partioning Message-ID: <20020503212146.GA202@foo31-146.visit.se> Mail-Followup-To: Martin Karlsson , paulrcarl@earthlink.net, freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="5mCyUwZo2JvN/JJP" Content-Disposition: inline In-Reply-To: X-PGP-Fingerprint: 5970 BE22 2C33 4D8F 53FD 7E34 66FF 9332 9C92 4660 User-Agent: Mutt/1.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --5mCyUwZo2JvN/JJP Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * paulrcarl@earthlink.net [2002-05-03 13.47 -0800= ]: > Thanks for Nothing! > I asked for help. Not guessing Games. What do you mean, "guessing games"? > I know where the manual is and how to read it. Good! FWIW, > > * paulrcarl@earthlink.net [2002-05-03 09.58 -= 0800]: > > > The partioning software... WindRiver 4 CD distribution simply > > > doesn't respond to my attempts to specify 20Gb or 4500 Blocks or > > > whatever it needs to begin partioning. Need help. [...snip...] What does this *mean*? What do you mean by "doesn't respond"? You have an empty hard-disk, right? And you see a screen with 'FDISK Partition Editor' to the top and right, as described in the handbook? You should see your hd marked 'unused'. Press C (for create slice). You want a bsd-slice (165 I think). Select it's size (in MB, i.e=20 type in '20000MB'). Is this roughly what's not working for you? You've got to provide some info about the errors you're getting, or you'll receive messages saying "read the handbook!" HTH --=20 Martin Karlsson - 0x9C924660 --5mCyUwZo2JvN/JJP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80v9pZv+TMpySRmARAg/2AKCOKOMf5CDLril7xZIhc6DnTC49twCbBHi0 KEqaC4gDhU/jQ3aEAW3jEzM= =VpWQ -----END PGP SIGNATURE----- --5mCyUwZo2JvN/JJP-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:22:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from postfix.ultradns.net (postfix.ultradns.net [204.74.100.40]) by hub.freebsd.org (Postfix) with ESMTP id 2DDC037B405 for ; Fri, 3 May 2002 14:22:06 -0700 (PDT) Received: from localhost (localhost.ultradns.net [127.0.0.1]) by postfix.ultradns.net (Postfix) with ESMTP id E280D22FE0; Fri, 3 May 2002 14:25:04 -0700 (PDT) Received: from ultra-exchange.UltraDNS.com (nat-external.ultradns.net [204.74.100.10]) by postfix.ultradns.net (Postfix) with ESMTP id 51A9722F80; Fri, 3 May 2002 14:25:02 -0700 (PDT) content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Subject: RE: Remote Upgrade Date: Fri, 3 May 2002 14:22:02 -0700 Message-ID: <3DBB075EEB95944492E127F2B9A96FAF539525@ultra-exchange.UltraDNS.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Remote Upgrade Thread-Index: AcHyVniFkEx5q81ETu2W1xcepTc2IAAj/gog From: "Patrick Soltani" To: "Shawn Walker" Cc: X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have upgraded my production firewalls, FreeBSD 4.x, over the network = with little or no problems. Here is the recipe, couple of cvsup for src tree couple of cvsup for ports tree make -j 16 buildworld > somefile0 make buildkernel KERNCONF=3DMYKERNEL0 > somefile1 make installkernel KERNCONF=3DMYKERNEL0 > somefile2 make installworld > somefile3 reboot the machine mergemaster. The last part is kind of tricky, but executed without any options, you = get a chance to read the changes and apply the ones you want. If the machine is a 7X24 production box and you can not have it downed, = then put the lines above into a script, hopefully with some error = checking, etc and do a "nice or renice" so it runs in the background and = when finished emails you. Regards, Patrick Soltani. =20 P.S. Although I have had no problems doing this, I had a console switch = with an attached modem hooked up to the serial port so if anything went = wrong, still I could get to the machine to revive it. > -----Original Message----- > From: Shawn Walker [mailto:shawn@eblend.org] > Sent: Thursday, May 02, 2002 8:54 PM > To: freebsd-questions@freebsd.org > Subject: Remote Upgrade >=20 >=20 > Hello, >=20 > I currently have a box running 4.1-RELEASE. It is not=20 > possible for me > to gain physical access to the box, so I was wondering if it=20 > is possible to > upgrade the box remotely. I have looked at the instructions=20 > in the handbook > and in /usr/src/UPDATING, but there is some mention of a few=20 > steps that > should be completed in single user mode. Is it possible to do this > remotely? >=20 > Thanks, >=20 > --=20 > Shawn Walker > shawn@eblend.org <-----> http://www.eblend.org/ >=20 > "In rural areas, we're not going to have full coverage until=20 > cows talk." > -- Dan Dan Wilinsky, Sprint PCS >=20 >=20 >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:32:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta8.srv.hcvlny.cv.net (mta8.srv.hcvlny.cv.net [167.206.5.23]) by hub.freebsd.org (Postfix) with ESMTP id EB26037B41C for ; Fri, 3 May 2002 14:32:14 -0700 (PDT) Received: from JEFF (ool-18b82245.dyn.optonline.net [24.184.34.69]) by mta8.srv.hcvlny.cv.net (iPlanet Messaging Server 5.0 Patch 2 (built Dec 14 2000)) with SMTP id <0GVK000AM15GHN@mta8.srv.hcvlny.cv.net> for freebsd-questions@FreeBSD.ORG; Fri, 03 May 2002 17:32:04 -0400 (EDT) Date: Fri, 03 May 2002 17:30:09 -0400 From: Jeff Heath Subject: How do I shut off auto-negotiation on my NIC To: freebsd-questions@FreeBSD.ORG Message-id: MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm a newbie to BSD. Installed 4.0 GENERIC on a Dell Optiplex with a 3Com 3c905b Ethernet card. When I performed the initial installation, I selected auto-negotiation and listed 100BaseTX Full-Duplex as my first choice. Now I want to force the card to 10baseT/UTP half-duplex. I tried using ifconfig. I input the following command: ifconfig xl0 media 10baseT/UTP. Here's the output xl0: flags=8842 mtu 1500 ether 00:c0:4f:8b:93.dd media 10baseT/UTP (100baseTX ) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX I don't have any test equipment to verify for certain that the card is operating at 100baseTX , but I am very confident that this is the case. Here's why: The lights on the Linksys router I have it connected to show 100M Full-duplex operation (and when the BSD machine is plugged in there, everything works fine - I can surf the 'net, etc.) If I connect the BSD machine to my Cisco 2610 router. It won't auto-negotiate to 10MB half-duplex If I connect the BSD machine to my Win2k machine with the NIC set at 10Mb half, the BSD machine WILL auto-negotiate to 10MB. I know this to be true because I get the following output from ifconfig xl0: xl0: flags=8842 mtu 1500 ether 00:c0:4f:8b:93.dd media 10baseT/UTP status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX note the absence of the (100baseTX ) statement. Also, if I connect the BSD machine to the Cisco 2610 router after it negotiated to 10MB half-duplex, all is well. So, the REAL problem is that the Cisco 2610 router does not auto-negotiate properly. This is no surprise. I can work around my problem, but it's a nuisance, and I would like to know the proper way to completely rid myself of auto-negotiation anyway. Thanks in advance for any suggestions. Jeff Heath To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:34:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by hub.freebsd.org (Postfix) with ESMTP id 19DF437B404 for ; Fri, 3 May 2002 14:34:27 -0700 (PDT) Received: from owt.com (owt-207-41-94-232.owt.com [207.41.94.232]) by rutger.owt.com (8.9.3/8.9.3) with ESMTP id OAA18338; Fri, 3 May 2002 14:34:22 -0700 Message-ID: <3CD3025D.60400@owt.com> Date: Fri, 03 May 2002 14:34:21 -0700 From: Kent Stewart User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4.1) Gecko/20020314 Netscape6/6.2.2 X-Accept-Language: en-us, es-mx MIME-Version: 1.0 To: pascal barbedor Cc: freebsd-questions@freebsd.org Subject: Re: Fwd: kern compile problem 4.5 References: <3CD28EAF.3050806@owt.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG pascal barbedor wrote: > Hi Kent, > > thanks a lot for your help. > I commented out umass line and it went fine except I still have the > > usb_ethersubr.o: in function usbintr > undefined reference to ether_input > > do you know from what line this comes ? I have not seen that message before. > do i have to keep some ether even without any ethernet card ? You don't but I think that I would start with a complete copy of GENERIC and convert that into OURAL. Then, I would comment out section by section. Then, when something doesn't work, you can look at the section you just worked on and comment or uncomment something to fix the problem. The only USB ethernet options look like # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet You don't show anything like them commented out and I didn't see anything in the LINT. I have a couple of systems that came with USB and I commented out all of the options. You should also copy the entire error message because most of them have a line number that may let someone know what your error is. FWIW, I couldn't find a definiton of ether_inptu in the c-code or a header. Kent > > thanks > pascal > > > > kstewart@owt.com writes: > >> >>pascal barbedor wrote: >> >> >>>hi >>> >>>trying this configution file below gives an error at compilation >>> >>>basically i have disabled any ethernet, scsi , laptop line and i have an >>>error at linking kernel stage with >>> >>>usbethersubr.o undefined referernce to etherinput >>>then umass.o undefined reference to cam_simq_alloc and others.. >>> >> >>Your kernel listing appears to be incomplete. Normally you do not see >>this message with out the umass device being specified in the USB >>section at the very bottom. The line with umass on it tells you that >>you also have to have the scbus and da devices available. You have >>them commented. >> >> >>># SCSI peripherals >>>#device scbus # SCSI bus (required) >>>#device da # Direct Access (disks) >>> >>Kent >> >> >> > > config file used: > > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 > murray Exp $ > > machine i386 > cpu I586_CPU > ident OURAL > maxusers 0 > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > #options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options UFS_DIRHASH #Improve performance on big directories > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, NFS required > #options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > > device isa > #device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > #device fd1 at fdc0 drive 1 > # > # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, > # don't use the above line for fdc0 but the following one: > #device fdc0 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > #device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard AIC7xxx devices > #device amd # AMD 53C974 (Tekram DC-390(T)) > #device isp # Qlogic family > #device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic (newer chipsets) > #options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices when > # both sym and ncr are configured > > #device adv0 at isa? > #device adw > #device bt0 at isa? > #device aha0 at isa? > #device aic0 at isa? > > #device ncv # NCR 53C500 > #device nsp # Workbit Ninja SCSI-3 > #device stg # TMC 18C30/18C50 > > # SCSI peripherals > #device scbus # SCSI bus (required) > #device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > #device cd # CD > #device pass # Passthrough device (direct SCSI access) > > # RAID controllers interfaced to the SCSI subsystem > #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > #device dpt # DPT Smartcache - See LINT for options! > #device mly # Mylex AcceleRAID/eXtremeRAID > > # RAID controllers > #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT > lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > # PCCARD (PCMCIA) support > #device card > #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > #device sio2 at isa? disable port IO_COM3 irq 5 > #device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs > #device de # DEC/Intel DC21x4x (``Tulip'') > #device txp # 3Com 3cR990 (``Typhoon'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these > NICs! > #device miibus # MII bus support > #device dc # DEC/Intel 21143 and various workalikes > #device fxp # Intel EtherExpress PRO/100B (82557, 82558) > #device pcn # AMD Am79C97x PCI 10/100 NICs > #device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sis # Silicon Integrated Systems SiS 900/SiS 7016 > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device tl # Texas Instruments ThunderLAN > #device tx # SMC EtherPower II (83c170 ``EPIC'') > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device wx # Intel Gigabit Ethernet Card (``Wiseman'') > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > #device bge # Broadcom BCM570x (``Tigon III'') > > # ISA Ethernet NICs. > # 'device ed' requires 'device miibus' > #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > #device ex > #device ep > #device fe0 at isa? port 0x300 > # Xircom Ethernet > #device xe > # PRISM I IEEE 802.11b wireless NIC. > #device awi > # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA attachment needed > # and resources will always be dynamically assigned by the pccard code. > #device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > # mode (the factory default). If you set the switches on your ISA > # card for a manually chosen I/O address and IRQ, you must specify > # those parameters here. > #device an > # The probe order of these is presently determined by > i386/isa/isa_compat.c. > #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 irq 10 drq 0 > #device cs0 at isa? port 0x300 > #device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units to allocate. > pseudo-device loop # Network loopback > #pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > #pseudo-device bpf #Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > #device uhid # "Human Interface Devices" > device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus and da > > > . > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:41:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from foo31-146.visit.se (foo31-146.visit.se [62.119.31.146]) by hub.freebsd.org (Postfix) with ESMTP id 818C337B404 for ; Fri, 3 May 2002 14:41:26 -0700 (PDT) Received: (from martin@localhost) by foo31-146.visit.se (8.11.6/8.11.6) id g43LfHu01093; Fri, 3 May 2002 23:41:17 +0200 (CEST) (envelope-from martin) Date: Fri, 3 May 2002 23:41:17 +0200 From: Martin Karlsson To: "S. Roberts" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Error upgrading ImageMagick-5.4.4 with portupgrade Message-ID: <20020503214117.GB202@foo31-146.visit.se> Mail-Followup-To: Martin Karlsson , "S. Roberts" , freebsd-questions@FreeBSD.ORG References: <1020459161.299.71.camel@Demon.Strobe.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="vGgW1X5XWziG23Ko" Content-Disposition: inline In-Reply-To: <1020459161.299.71.camel@Demon.Strobe.org> X-PGP-Fingerprint: 5970 BE22 2C33 4D8F 53FD 7E34 66FF 9332 9C92 4660 User-Agent: Mutt/1.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --vGgW1X5XWziG23Ko Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable * S. Roberts [2002-05-03 21.52 +0100]: > Hi, > I've just run portupgrade for ImageMagick-5.4.4 and got the errors > below. >=20 > # portupgrade -R ImageMagick-5.4.4 > ---> Upgrading 'ImageMagick-5.4.4' to 'ImageMagick-5.4.4.5' > (graphics/ImageMagick) [...snip...] > check, type "make NO_CHECKSUM=3Dyes [other args]". > *** Error code 1 What are you trying to do? If you think you can trust the tarball, then doing: 'portupgrade -Rm NO_CHECKSUM=3Dyes ImageMagick-5.4.4' should work. (man portupgrade is your friend) If you're trying to _resolve_ the checksum mismatch, I'm sorry, but I don't know how to do that. HTH --=20 Martin Karlsson - 0x9C924660 --vGgW1X5XWziG23Ko Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE80wP8Zv+TMpySRmARAiBKAJ0aK7jFoLJ7EOkPW+q46yhStjUROgCfUjcC etVQENEInXYskWtEFumwmgU= =FS6q -----END PGP SIGNATURE----- --vGgW1X5XWziG23Ko-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:43: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from postfix.ultradns.net (postfix.ultradns.net [204.74.100.40]) by hub.freebsd.org (Postfix) with ESMTP id 6E31B37B420; Fri, 3 May 2002 14:42:49 -0700 (PDT) Received: from localhost (localhost.ultradns.net [127.0.0.1]) by postfix.ultradns.net (Postfix) with ESMTP id 4013A22FE0; Fri, 3 May 2002 14:45:48 -0700 (PDT) Received: from ultra-exchange.UltraDNS.com (nat-external.ultradns.net [204.74.100.10]) by postfix.ultradns.net (Postfix) with ESMTP id AC09C22F80; Fri, 3 May 2002 14:45:45 -0700 (PDT) content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-MimeOLE: Produced By Microsoft Exchange V6.0.5762.3 Subject: RE: traceroute option that shows forward and reverse path. Date: Fri, 3 May 2002 14:42:46 -0700 Message-ID: <3DBB075EEB95944492E127F2B9A96FAF539526@ultra-exchange.UltraDNS.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: traceroute option that shows forward and reverse path. Thread-Index: AcHyZz1BZOSgOfG7SD+xf3a2ATz6pQAgwOog From: "Patrick Soltani" To: "Mike Flanagan" , Cc: X-Virus-Scanned: by AMaViS perl-11 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The traceroute uses udp and by definition, udp takes the best route at = any given time; out of sequence arrival, etc. Traceroute can only show you one way path, however, some versions of = traceroute should have "-s" option which allows you to specify the = source of the packet to trace from. If you got multiple nics, the -s = will help you originate the packets from that particular interface using = ip though not name. You need someone at the other end to do the same and then you may have a = complete turnaround path for that moment in time! Regards, Patrick Soltani. -----Original Message----- From: Mike Flanagan [mailto:mikenoc@mindspring.net] Sent: Thursday, May 02, 2002 11:00 PM To: questions@FreeBSD.org Cc: freebsd-newbies@freebsd.org Subject: traceroute option that shows forward and reverse path. =20 Hello, I am looking for an option with traceroute that will show you the route = you take externally and back internally. Basically so if I am multihomed and I leave one way = and come back through a different circuit it will show both paths. Unfortunaly I could = not find an option with this. Does anyone know of a different version of traceroute or = maybe a different program or an option with traceroute that I do not know of ? Thanks, Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:49:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 6B7EC37B417 for ; Fri, 3 May 2002 14:48:59 -0700 (PDT) Received: (qmail 2844 invoked from network); 3 May 2002 21:11:30 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-1.dial.pipex.com with SMTP; 3 May 2002 21:11:30 -0000 Subject: RE: Firewall config and logs From: "S. Roberts" Reply-To: sroberts@dsl.pipex.com To: Joe & Fhe Barbish Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <1020316768.299.17.camel@Demon.Strobe.org> References: <1020316768.299.17.camel@Demon.Strobe.org> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 22:07:56 +0100 Message-Id: <1020460076.299.84.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Joe, I had a look through the link you included in your last reply now, and I'm very impressed with the information provided there. I have a few questions as a result: 1] As indicated earlier, the major connection method in my case is ethernet connection to my router, thence to my ISP's router. Can I still use the format of your example, supplying my nic interface in place of tun* wherever it occurs? E.G. Your script [oif="tun0"] My case [oif="nic0"] 2] Leading from the above, is it safe then to exclude all references to "dial-in" services as well? Thanks again for your assistance and the information put together in the link. I was very pleased to see other members taking the time to compile such detailed and practical information to others. Hope to hear from you again soon. Stacey On Thu, 2002-05-02 at 07:19, S. Roberts wrote: > Thank you very much for the information and warning Joe. > > I'll have a look at what you've recomended here and try to implement > some more advanced stateful rules and some logging. > > Thanks again for the assistance. > > Stacey > > On Thu, 2002-05-02 at 02:27, Joe & Fhe Barbish wrote: > > Now all the parts fall into place. All your ipfw firewall rules need to be > > changes so and tuno say sis0. Specially the divert natd rule. You are > > no longer using user ppp. If for backup purposes you want to keep the modem > > and dial out to your isp, then you have to have 2 different ipfw rule sets > > and manually load the one that matches the modem dial method when you use > > the modem. I see from your ipfw rules you are only using stateless rules and > > simple stateful rules. Be far warned these rule types do not provide > > adequate protection. You need to use advanced stateful rules. Read this > > how-to for details on advanced stateful rules and how to set up logging. > > > > http://www.freebsd-howto.com/HOWTO/Ipfw-Advanced-Supplement-HOWTO > > > > -----Original Message----- > > From: S. Roberts [mailto:sroberts@dsl.pipex.com] > > Sent: Wednesday, May 01, 2002 6:57 PM > > To: Joe & Fhe Barbish > > Subject: RE: Firewall config and logs > > > > Hi Joe, > > Let me be moe detailed, if I can. > > > > FreeBSD nic ----> router ------> ADSL ISP > > > > I got the router (ethernet broadband with 4 10/100 ports) on my own, and > > configured the router settings via http to its initial default internal > > IP address. These settings included IP address details for my ISP's dns > > servers and username and password info. > > > > Also I set the router to accept dynamic external IP addresses from the > > ISP. > > > > The simplicity I referred to earlier reflects the fact that as soon as I > > set the default route to the new internal ip address (after removing the > > default shipped with the router) I set for the router, I found myself > > able to ping the router, my isp (then freebsd.org, yahoo etc..,). > > > > After this, it was a simple matter of launching a browser and that was > > it. Configuring Evolution to send and collect e-mail took longer :-) > > > > Hope that this explains the situation a bit more. Sorry if I was > > ambiguous earlier. > > > > Let me know what you think of what I can do for enabling logging for my > > firewall, okay? > > > > Thanks again. > > > > Stacey > > > > On Thu, 2002-05-02 at 00:47, Joe & Fhe Barbish wrote: > > > You stated > > > "I simply connected my router to the FreeBSD box, configured > > > the router's ADSL configs, and that was it - connected." > > > If by this you mean your FBSD nic card is connected to the router, > > > then you are correct. > > > I you are saying you can ping an public internet ip address from FBSD, > > then > > > you > > > have to provide more information about this routers ADSL configs and > > > what it's doing for you. Did you tell the router your account name and > > > password? > > > Is it loging you on to the ADSL ISP? > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > From: S. Roberts [mailto:sroberts@dsl.pipex.com] > > > Sent: Wednesday, May 01, 2002 2:48 PM > > > To: Joe & Fhe Barbish > > > Subject: RE: Firewall config and logs > > > > > > Sorry about that, I only thought of the attachment format after sending > > > the email! > > > > > > I should mention though - I'm not actually *using* ppp now, if that > > > makes sense. I simply connected my router to the FreeBSD box, configured > > > the router's ADSL configs, and that was it - connected. > > > > > > I have been concerned that I'm connecting this way, but could not work > > > out what it is I would need to change in order to connect any other way. > > > I found that the documentation at FreeBSD.org only contained info on > > > using usb-connected modems, anyway. > > > > > > Hope that the info here helps, please let me know if you require further > > > info, okay? > > > > > > Thanks for getting back to me. > > > > > > Stacey > > > > > > rc.conf: > > > # Created: Mon Feb 11 01:25:58 2002 > > > # Enable network daemons for user convenience. > > > # Please make all changes to this file, not to /etc/defaults/rc.conf. > > > # This file now contains just the overrides from /etc/defaults/rc.conf. > > > gateway_enable="YES" > > > hostname="Demon.Strobe.org" > > > kern_securelevel_enable="NO" > > > keymap="uk.iso" > > > linux_enable="YES" > > > moused_enable="YES" > > > moused_port="/dev/psm0" > > > moused_type="auto" > > > nfs_reserved_port_only="YES" > > > saver="warp" > > > sendmail_enable="YES" > > > sshd_enable="YES" > > > usbd_enable="YES" > > > # -- sysinstall generated deltas -- # Mon Feb 11 03:13:00 2002 > > > kern_securelevel_enable="NO" > > > sendmail_enable="YES" > > > sshd_enable="YES" > > > nfs_reserved_port_only="YES" > > > usbd_enable="YES" > > > usbd_flags="" > > > usbd_enable="YES" > > > usbd_flags="" > > > firewall_enable="YES" > > > firewall_script="/etc/firewall/fwrules" > > > natd_enable="YES" > > > natd_interface="tun0" > > > natd_flags="-dynamic" > > > ifconfig_sis0="DHCP" > > > hostname="Demon.Strobe.org" > > > $ > > > > > > ppp.conf: > > > > > > # Ensure that "device" references the correct serial port > > > # for your modem. (cuaa0 = COM1, cuaa1 = COM2) > > > # > > > set device /dev/cuaa1 > > > > > > set speed 115200 > > > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ > > > \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" > > > set timeout 180 # 3 minute idle timer (the > > default) > > > enable dns # request DNS info (for > > resolv.conf) > > > > > > papchap: > > > # > > > # edit the next three lines and replace the items in caps with > > > # the values which have been assigned by your ISP. > > > # > > > > > > set phone > > > set authname > > > set authkey > > > > > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > > > add default HISADDR # Add a (sticky) default route > > > # > > > > > > > > > Here're my rules: > > > # Firewall Rules > > > # Define Firewall Command > > > fwcmd="/sbin/ipfw" > > > > > > # Force Flushing of Current Rule-Set Before Reload > > > $fwcmd -f flush > > > > > > # Divert All Packets Through Tunnel Device > > > $fwcmd add divert natd all from any to any via tun0 > > > > > > # Block all incoming Fragmented packets > > > $fwcmd add deny all from any to any in frag > > > > > > # Reject & Log all setup of incoming connections from outside > > > $fwcmd add deny log tcp from any to any in via setup > > > > > > # Allow All Data from my NIC and Localhost > > > $fwcmd add allow ip from any to any via lo0 > > > $fwcmd add allow ip from any to any via > > > > > > # Allow All Connections I Initiate > > > $fwcmd add allow tcp from any to any out xmit setup > > > > > > # Once Connection Established, Allow To Stay Open > > > $fwcmd add allow tcp from any to any via established > > > > > > # Send Reset To All Ident Packets > > > # Allow Outgoing DNS Queries ONLY to These Specified Servers > > > $fwcmd add allow udp from any to out xmit sis0 > > > $fwcmd add allow udp from any to 53 out xmit sis0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > $fwcmd add allow udp from any to 53 out xmit tun0 > > > > > > # Allow DNS Queries Back In With Results > > > $fwcmd add allow udp from 53 to any in recv sis0 > > > $fwcmd add allow udp from 53 to any in recv sis0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > $fwcmd add allow udp from 53 to any in recv tun0 > > > > > > # Allow ICMP For PING and Traceroute > > > $fwcmd add allow icmp from any to any > > > > > > # Deny The Rest > > > $fwcmd add deny log ip from any to any > > > > > > On Wed, 2002-05-01 at 20:33, Joe & Fhe Barbish wrote: > > > > You need to provide more info. Post your ipfw rules in the email body, > > not > > > > in some format that nobody can read as an attached file. That's a no no > > in > > > > this questions list. Post complete rc.conf file, ppp.conf, and your ipfw > > > > rules file. > > > > > > > > >From what you stated I see no need for natd, you should be using -nat > > of > > > > user ppp. > > > > Read this www.freebsd-howto.com/HOWTO/Ipfw-Advanced-Supplement-HOWTO > > > > > > > > > > > > -----Original Message----- > > > > From: owner-freebsd-questions@FreeBSD.ORG > > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of S. Roberts > > > > Sent: Wednesday, May 01, 2002 1:44 PM > > > > To: freebsd-questions@freebsd.org > > > > Subject: Firewall config and logs > > > > > > > > Hello, > > > > I have a question about my firewall configs. > > > > > > > > I've progressed from connecting over user ppp via 56k dial-up external > > > > modem with a firewall rule-set (and Portsentry as per the mention in > > > > Unleashed) that I thought worked well enough. > > > > > > > > I've since moved on the connecting via DSL (dynamic IP) - PPPoE with a > > > > new ISP. What I've done is simply *added* relevant entries to my > > > > firewall rules so as to cater for new IP addresses provided by my new > > > > ISP. I still have the dial-up account with the first ISP, I just don't > > > > use it as often. > > > > > > > > Here's what I figured: > > > > Seeing that I now connect via my nic, I might be able to remove entries > > > > for tun0 in my rules and replace them with that for my nic card that's > > > > connected to my router. > > > > > > > > What I found is that I could no longer ping my router, the nic, nor > > > > anything over the Internet. > > > > > > > > I'm somewhat confused by this. If I'm using my nic, why should removing > > > > entries for tun0 (previously set up for my serial modem) cause the > > > > firewall to prevent connection? > > > > > > > > I'd appreciate someone clearing this up for me, please. > > > > > > > > Further to this, I would also be grateful for assistance in setting up > > > > logging for my firewall operations (record entries of denied packets / > > > > connection attempts). I've included a sanitized copy of my rules here > > > > for clarity. Should you require more info, please let me know. > > > > > > > > Uname: > > > > $ uname -a > > > > FreeBSD 4.5-STABLE FreeBSD 4.5-STABLE #0: Sun Apr 28 12:24:07 BST > > > > 2002 :/usr/src/sys/compile/IRON i386 > > > > $ > > > > > > > > Firewall options in rc.conf: > > > > > > > > firewall_enable="YES" > > > > firewall_script="/etc/firewall/fwrules" > > > > natd_enable="YES" > > > > natd_interface="tun0" > > > > natd_flags="-dynamic" > > > > > > > > > > > > Thanks for the time, > > > > > > > > Stacey > > > > -- > > > > Stacey Roberts B.Sc. (HONS) Computer Science > > > > Network Systems Engineer > > > > > > > -- > > > Stacey Roberts B.Sc. (HONS) Computer Science > > > Network Systems Engineer > > > > > -- > > Stacey Roberts B.Sc. (HONS) Computer Science > > Network Systems Engineer > > > -- > Stacey Roberts B.Sc. (HONS) Computer Science > Network Systems Engineer -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 14:51:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from bsd.alexe.org (slbch-4-m1-19.vnnyca.adelphia.net [24.55.79.19]) by hub.freebsd.org (Postfix) with ESMTP id 7CF2637B420 for ; Fri, 3 May 2002 14:51:15 -0700 (PDT) Received: (from alex@localhost) by bsd.alexe.org (8.12.3/8.12.3) id g43Lswgr024391; Fri, 3 May 2002 14:54:58 -0700 (PDT) (envelope-from alex) Date: Fri, 3 May 2002 14:54:58 -0700 From: Alex Obradovic To: freebsd-questions@freebsd.org, Patrick Soltani Subject: Re: Remote Upgrade Message-ID: <20020503215458.GB16657@montenegro.com> References: <3DBB075EEB95944492E127F2B9A96FAF539525@ultra-exchange.UltraDNS.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3DBB075EEB95944492E127F2B9A96FAF539525@ultra-exchange.UltraDNS.com> User-Agent: Mutt/1.3.27i X-Editor: Vim http://www.vim.org/ X-Info: http://www.alexe.org X-Operating-System: FreeBSD/4.5-STABLE (i386) X-Uptime: 2:50PM up 17:06, 10 users, load averages: 0.03, 0.03, 0.00 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > I have upgraded my production firewalls, FreeBSD 4.x, over the network with little or no problems. > Here is the recipe, > couple of cvsup for src tree > couple of cvsup for ports tree > make -j 16 buildworld > somefile0 > make buildkernel KERNCONF=MYKERNEL0 > somefile1 > make installkernel KERNCONF=MYKERNEL0 > somefile2 > make installworld > somefile3 > reboot the machine > mergemaster. > My understanding was that we should do mergemaster BEFORE rebooting the machine. I have been updating 3-4 different systems remotely by following this path: cvsup buildworld installworld buildkernel installkernel mergemaster reboot Alex > The last part is kind of tricky, but executed without any options, you get a chance to read the changes and apply the ones you want. > > If the machine is a 7X24 production box and you can not have it downed, then put the lines above into a script, hopefully with some error checking, etc and do a "nice or renice" so it runs in the background and when finished emails you. > > Regards, > Patrick Soltani. > > P.S. Although I have had no problems doing this, I had a console switch with an attached modem hooked up to the serial port so if anything went wrong, still I could get to the machine to revive it. > > > > > -----Original Message----- > > From: Shawn Walker [mailto:shawn@eblend.org] > > Sent: Thursday, May 02, 2002 8:54 PM > > To: freebsd-questions@freebsd.org > > Subject: Remote Upgrade > > > > > > Hello, > > > > I currently have a box running 4.1-RELEASE. It is not > > possible for me > > to gain physical access to the box, so I was wondering if it > > is possible to > > upgrade the box remotely. I have looked at the instructions > > in the handbook > > and in /usr/src/UPDATING, but there is some mention of a few > > steps that > > should be completed in single user mode. Is it possible to do this > > remotely? > > > > Thanks, > > > > -- > > Shawn Walker > > shawn@eblend.org <-----> http://www.eblend.org/ > > > > "In rural areas, we're not going to have full coverage until > > cows talk." > > -- Dan Dan Wilinsky, Sprint PCS > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:43: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 19B8537B41B for ; Fri, 3 May 2002 15:42:55 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g43MgU331031; Fri, 3 May 2002 18:42:30 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g43NhHe0005052; Fri, 3 May 2002 19:43:17 -0400 (EDT) (envelope-from david) Date: Fri, 3 May 2002 19:43:17 -0400 From: David Banning To: Joe Marcus Clarke Cc: questions@freebsd.org Subject: Re: mozilla - no text entry appears Message-ID: <20020503194317.A5015@mail.clubplus.net> References: <20020503163403.A4378@mail.clubplus.net> <1020458039.84489.10.camel@gyros.marcuscom.com> <20020503175223.A4705@mail.clubplus.net> <1020459925.299.1.camel@gyros.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1020459925.299.1.camel@gyros.marcuscom.com>; from marcus@marcuscom.com on Fri, May 03, 2002 at 05:05:25PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > XFree86-4.0.3_3 > > You might want to consider upgrading to 4.2.0. OK. > > Do you have /usr/X11R6/lib/X11/fonts/misc in > > > your FontPath? Yes. > In your XF86Config, you need to have /usr/X11R6/lib/X11/fonts/misc > defined as a FontPath element. As well, you need > /usr/X11R6/lib/X11/fonts/misc to exist, and have fonts.alias and > fonts.dir files. They exist in that directory. thanks for your input. If upgrading X works, I'll drop you a note. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:47:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server3.safepages.com (server3.safepages.com [216.127.146.5]) by hub.freebsd.org (Postfix) with ESMTP id 857B437B416 for ; Fri, 3 May 2002 15:47:04 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool29-56.nas33.philadelphia1.pa.us.da.qwest.net [65.129.29.56]) by server3.safepages.com (Postfix) with ESMTP id CDE2E5D09 for ; Fri, 3 May 2002 22:46:57 +0000 (GMT) Content-Type: text/plain; charset="us-ascii" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: freebsd-questions@FreeBSD.org Subject: Transfer speed Date: Fri, 3 May 2002 18:47:01 -0400 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200205031847.01274.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a box running FreeBSD and win2K and a laptop running win2k, when I have both of these machines connected to each other and if both are running win2k I can transfer files between them very fast for example 20 meg file will take seconds to transfer but I'm running FreeBSD and connect the laptop it will take forever to transfer a 20 meg file and I can see in gkrellm that it's only transfering at a rate of (more or less) 40 Kbs. Does anyone have any idea why it is so slow? Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:51:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.getnet.net (mail.getnet.net [63.137.32.10]) by hub.freebsd.org (Postfix) with SMTP id 7380237B41B for ; Fri, 3 May 2002 15:51:15 -0700 (PDT) Received: (qmail 9481 invoked from network); 3 May 2002 22:51:13 -0000 Received: from 216-19-216-57.getnet.net (HELO sunny.localdomain) (216.19.216.57) by 0 with SMTP; 3 May 2002 22:51:13 -0000 Received: (from rooot@localhost) by sunny.localdomain (8.11.6/8.11.6) id g43MoaP11632 for freebsd-questions@freebsd.org; Fri, 3 May 2002 15:50:36 -0700 (MST) (envelope-from swive@getnet.com) Date: Fri, 3 May 2002 15:50:36 -0700 From: VB To: freebsd-questions@freebsd.org Subject: good wireless card recommendation? Message-ID: <20020503155036.D3552@sunny.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm getting ready to head down to the local computer super-wharehouse and bye a wireless pcmcia card. I would like it to work with 4.4 Release, RH7.1, and W2K. Anyone have any suggestions? Thx, Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:51:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out4.mx.nwbl.wi.voyager.net (out4.mx.nwbl.wi.voyager.net [169.207.1.77]) by hub.freebsd.org (Postfix) with ESMTP id 2909437B416 for ; Fri, 3 May 2002 15:51:47 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out4.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g43MpkTN010925 for ; Fri, 3 May 2002 17:51:46 -0500 Received: from localhost (raiden@localhost) by shell.core.com (8.11.6/8.11.6/1.3) with ESMTP id g43Mpkf08841 for ; Fri, 3 May 2002 17:51:46 -0500 (CDT) Date: Fri, 3 May 2002 17:51:46 -0500 (CDT) From: Steven Lake X-X-Sender: raiden@shell.core.com To: freebsd-questions@FreeBSD.ORG Subject: Demote Root, Promote UserX? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I saw something similar to this mentioned with Windows 2000 that you could do to deture hackers, and I was curious if it's possible with Fbsd? Can you rename the Root account or possibly demote it, then promote a lower user account, say something along the lines of "Admin1" or something to that respect, to the roll of root and not screw anything up? Or if that's not possible, can you add another user with the same powers as root while disabling root itself? I'm just jabbing for ideas to stop a hacker who might be hacking in looking for the root account to take control of a machine by allowing them to hit an account with zero privaledges and go absolutely nowhere. Of course we plan to be monitoring and catch them if they do, but I want to slow them down or stop them if possible using this. Any comments are welcome. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:53:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailc.telia.com (mailc.telia.com [194.22.190.4]) by hub.freebsd.org (Postfix) with ESMTP id 818C637B416 for ; Fri, 3 May 2002 15:53:31 -0700 (PDT) Received: from d1o913.telia.com (d1o913.telia.com [195.252.44.241]) by mailc.telia.com (8.11.6/8.11.6) with ESMTP id g43MrTQ21516 for ; Sat, 4 May 2002 00:53:30 +0200 (CEST) Received: from falcon.midgard.homeip.net (h53n2fls20o913.telia.com [212.181.163.53]) by d1o913.telia.com (8.8.8/8.8.8) with SMTP id AAA09894 for ; Sat, 4 May 2002 00:53:29 +0200 (CEST) Received: (qmail 23607 invoked by uid 1001); 3 May 2002 22:53:26 -0000 Date: Sat, 4 May 2002 00:53:26 +0200 From: Erik Trulsson To: "E. J. Cerejo" Cc: freebsd-questions@FreeBSD.org Subject: Re: Transfer speed Message-ID: <20020503225326.GA23595@student.uu.se> Mail-Followup-To: "E. J. Cerejo" , freebsd-questions@FreeBSD.org References: <200205031847.01274.ecerejo@zapo.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200205031847.01274.ecerejo@zapo.net> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 06:47:01PM -0400, E. J. Cerejo wrote: > I have a box running FreeBSD and win2K and a laptop running win2k, when I have > both of these machines connected to each other and if both are running win2k > I can transfer files between them very fast for example 20 meg file will take > seconds to transfer but I'm running FreeBSD and connect the laptop it will > take forever to transfer a 20 meg file and I can see in gkrellm that it's > only transfering at a rate of (more or less) 40 Kbs. Does anyone have any > idea why it is so slow? Thanks Since you haven't even bothered to include the most elementary information in your question, like: What version of FreeBSD are you using? How are the computers connected with each other? How are you transferring the files? What is gkrellm, for those of us who are not familiar with it? then it is pretty much impossible to answer why the transfer is slow. -- Erik Trulsson ertr1013@student.uu.se To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 15:58:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out4.mx.nwbl.wi.voyager.net (out4.mx.nwbl.wi.voyager.net [169.207.1.77]) by hub.freebsd.org (Postfix) with ESMTP id 7377737B41B for ; Fri, 3 May 2002 15:58:21 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out4.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g43MwLTN011514 for ; Fri, 3 May 2002 17:58:21 -0500 Received: from localhost (raiden@localhost) by shell.core.com (8.11.6/8.11.6/1.3) with ESMTP id g43MwKQ09135 for ; Fri, 3 May 2002 17:58:20 -0500 (CDT) Date: Fri, 3 May 2002 17:58:20 -0500 (CDT) From: Steven Lake X-X-Sender: raiden@shell.core.com To: freebsd-questions@FreeBSD.ORG Subject: Ping of death? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I've got one box that's got absolutely horrible access speed to the net but it's on a T1 line and no other machine is sharing the line. Telco has tested the line and sees nothing wrong but were unable to do a bandwidth or data test to see if it's just traffic or not. The line should be pushing the full 1.544mbps, but I'm barely able to scrape 30k out of it. Any machine that connects to it goes through the roof on the processor useage and dogs out. So I'm suspect of a possible ping of death, but I wanted to rule out the local equipment first. But since anything connecting to it to test this is gagged it's impossible to do any tests. Does anyone have a way to monitor incoming traffic to find out if you're being hit with a dos attack or should I ring telco again and have them do a test on the T1 line to find the source? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 16: 4:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail3.freesurf.fr (bastille.freesurf.fr [212.43.206.2]) by hub.freebsd.org (Postfix) with ESMTP id 3CFEF37B405 for ; Fri, 3 May 2002 16:04:14 -0700 (PDT) Received: from greatoak.home (du-212-24.nat.adsl.freesurf.fr [212.43.212.24]) by mail3.freesurf.fr (Postfix) with ESMTP id 1EB6819018; Sat, 4 May 2002 01:04:08 +0200 (CEST) Received: from greatoak.home (localhost [127.0.0.1]) by greatoak.home (8.12.2/8.12.2) with ESMTP id g43M74jV000597; Sat, 4 May 2002 00:07:05 +0200 (CEST) (envelope-from pcasidy@greatoak.home) Message-Id: <200205032207.g43M74jV000597@greatoak.home> Date: Sat, 4 May 2002 00:07:04 +0200 (CEST) From: Philippe CASIDY Subject: Re: mozilla - no text entry appears To: david@skytrackercanada.com Cc: questions@freebsd.org In-Reply-To: <20020503163403.A4378@mail.clubplus.net> MIME-Version: 1.0 Content-Type: TEXT/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 3 May, David Banning wrote: > I just compiled mozilla from the ports and it seems to > operate OK other than the text does not appear in > search boxes. The text will simply not enter. > I had this problem and solved it today ;) I simply removed my ~/.mozilla directory. I was not interested in its contents so I did not dig to found what the problem exactly was. Ph°1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 16: 4:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server12.safepages.com (server12.safepages.com [216.127.146.26]) by hub.freebsd.org (Postfix) with ESMTP id 878DF37B41A for ; Fri, 3 May 2002 16:04:37 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool29-56.nas33.philadelphia1.pa.us.da.qwest.net [65.129.29.56]) by server12.safepages.com (Postfix) with ESMTP id AC8021360E3 for ; Fri, 3 May 2002 23:04:33 +0000 (GMT) Content-Type: text/plain; charset="iso-8859-1" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net Subject: Re: Transfer speed Date: Fri, 3 May 2002 19:04:39 -0400 X-Mailer: KMail [version 1.4] To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200205031904.39510.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ---------- Forwarded Message ---------- Subject: Re: Transfer speed Date: Fri, 3 May 2002 18:59:15 -0400 From: "E. J. Cerejo" To: Erik Trulsson On Friday 03 May 2002 18:53, you wrote: > On Fri, May 03, 2002 at 06:47:01PM -0400, E. J. Cerejo wrote: > > I have a box running FreeBSD and win2K and a laptop running win2k, when I have > > both of these machines connected to each other and if both are running win2k > > I can transfer files between them very fast for example 20 meg file will take > > seconds to transfer but I'm running FreeBSD and connect the laptop it will > > take forever to transfer a 20 meg file and I can see in gkrellm that it's > > only transfering at a rate of (more or less) 40 Kbs. Does anyone have any > > idea why it is so slow? Thanks > > > Since you haven't even bothered to include the most elementary > information in your question, like: > What version of FreeBSD are you using? 4.5 Stable > How are the computers connected with each other? Nic cards 100 Mbs each > How are you transferring the files? I'm using psftp in the windows machine > What is gkrellm, for those of us who are not familiar with it? It's a sysutility for X and it can measure performance of various things like the modem and your nic card. > then it is pretty much impossible to answer why the transfer is slow. Sorry about that ------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 16: 9: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from topaz.mdcc.cx (topaz.mdcc.cx [212.204.230.141]) by hub.freebsd.org (Postfix) with ESMTP id 5234737B41A for ; Fri, 3 May 2002 16:09:04 -0700 (PDT) Received: from k7.mavetju.org (topaz.mdcc.cx [212.204.230.141]) by topaz.mdcc.cx (Postfix) with ESMTP id 099DE2B6CB; Sat, 4 May 2002 01:09:01 +0200 (CEST) Received: by k7.mavetju.org (Postfix, from userid 1001) id 91121215; Sat, 4 May 2002 09:08:57 +1000 (EST) Date: Sat, 4 May 2002 09:08:57 +1000 From: Edwin Groothuis To: Steven Lake Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Ping of death? Message-ID: <20020504090857.E56548@k7.mavetju.org> Mail-Followup-To: Edwin Groothuis , Steven Lake , freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: ; from raiden@shell.core.com on Fri, May 03, 2002 at 05:58:20PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 05:58:20PM -0500, Steven Lake wrote: > Does anyone have a way to monitor incoming traffic to find out if > you're being hit with a dos attack or should I ring telco again and have > them do a test on the T1 line to find the source? Try simple tools like tcpdump (tcpdump -ni ) and trafshow (/usr/ports/net/trafshow). At least it will tell you what is going on. Edwin -- Edwin Groothuis | Personal website: http://www.MavEtJu.org edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 16:29:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id 71F5F37B416 for ; Fri, 3 May 2002 16:29:25 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g43NTOuF071508; Fri, 3 May 2002 17:29:24 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g43NTOwd071505; Fri, 3 May 2002 17:29:24 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Fri, 3 May 2002 17:29:24 -0600 (MDT) From: Warren Block To: "E. J. Cerejo" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Transfer speed In-Reply-To: <200205031847.01274.ecerejo@zapo.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 3 May 2002, E. J. Cerejo wrote: > I have a box running FreeBSD and win2K and a laptop running win2k, > when I have both of these machines connected to each other and if > both are running win2k I can transfer files between them very fast > for example 20 meg file will take seconds to transfer but I'm > running FreeBSD and connect the laptop it will take forever to > transfer a 20 meg file and I can see in gkrellm that it's only > transfering at a rate of (more or less) 40 Kbs. Does anyone have > any idea why it is so slow? Thanks Guessing: Ethernet autonegotiation. Explicitly set everything to 100M. -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 16:51: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by hub.freebsd.org (Postfix) with ESMTP id BB14C37B417 for ; Fri, 3 May 2002 16:50:58 -0700 (PDT) Received: from yokozuna.bsd ([213.10.35.60]) by smtp06.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVK7KW00.456 for ; Sat, 4 May 2002 01:50:56 +0200 Date: Sat, 4 May 2002 01:49:48 +0200 (CEST) From: Marco Beishuizen Reply-To: Marco Beishuizen To: FreeBSD questions mailing list Subject: printing via a JetDirect 600N printserver Message-ID: <20020504010626.B299-100000@yokozuna.bsd> FreeBSD: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have 2 computers and a laserjet connected to a hub in a network. Both computers are running FreeBSD (one 4.4 for Alpha and one 4.5). I installed a JetDirect 600N on my HP laserjet 2100, and I'm using apsfilter to install the printer. Well, my question is how to print... Apsfilter needs to know about the IP adress and hostname of the printer. How do I know what the hostname and the IP adress of the JetDirect are? Thanks, Marco -- Chivalry, Schmivalry! Roger the thief has a method he uses for sneaky attacks: Folks who are reading are Characteristically Always Forgetting to Guard their own bac ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 17: 2:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id C6D0537B419; Fri, 3 May 2002 17:02:04 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: How to get best results from FreeBSD-questions Message-Id: <20020504000204.C6D0537B419@hub.freebsd.org> Date: Fri, 3 May 2002 17:02:04 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How to get the best results from FreeBSD questions. =================================================== Last update 3 September 1999 This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from Majordomo@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions mailing list! If you ever want to remove yourself from this mailing list, you can send mail to "Majordomo@FreeBSD.ORG" with the following command in the body of your email message: unsubscribe freebsd-questions Greg Lehey Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as grog@lemis.de. Since then, I have changed it to grog@lemis.com. If I were to try to remove grog@lemis.com from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.org, and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions, -newbies or -hackers? =================================================== Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In addition, the FreeBSD-newbies list caters specifically for people who are new to FreeBSD and may be having trouble getting used to the environment. In some cases, it's not really clear which group you should ask. The following criteria should help for 99% of all questions, however: If the question is of a general nature, first check whether this isn't a Frequently Asked Question (FAQ). There's a list of these questions at http://www.freebsd.org/FAQ/FAQ.html, and also on your own system (once you've installed it) at /usr/share/doc/FAQ/FAQ.html. Check there, and if you don't find an answer, ask FreeBSD-questions. Examples might be questions about installing FreeBSD or the use of a particular UNIX utility. If you think the question relates to a bug, but you're not sure, or you don't know how to look for it, send the message to FreeBSD-questions. If the question relates to a bug, and you're almost sure that it's a bug (for example, you can pinpoint the place in the code where it happens, and you maybe have a fix), then send the message to FreeBSD-hackers. You should also enter a problem report with the send-pr utility. If the question relates to enhancements to FreeBSD, and you can make suggestions about how to implement them, then send the message to FreeBSD-hackers. If the question is of particularly technical nature, such as implementation details or suggestions for improvements, then send the message to FreeBSD-hackers. If you're new to FreeBSD, and the message is about your own relationship to FreeBSD, send the message to FreeBSD-newbies. There are also a number of other specialized mailing lists, for example FreeBSD-isp, which caters to the interests of ISPs (Internet Service Providers) who run FreeBSD. If you happen to be an ISP, this doesn't mean you should automatically send your questions to FreeBSD-isp. The criteria above still apply, and it's in your interest to stick to them, since you're more likely to get good results that way. IV: How to submit a question ============================= When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer even if you follow these rules. It's much more possible to not get an answer if you don't. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. ``FreeBSD problem'' or ``Help'' aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers or badly configured mailers. The following mailers are known to send out badly formatted messages without you finding out about them: Eudora exmh Microsoft Exchange Microsoft Internet Mail Microsoft Outlook Netscape As you can see, the mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. For further information on this subject, check out http://www.lemis.com/email.html. 4. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 5. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 6. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: If you get error messages, don't say ``I get error messages'', say (for example) ``I get the error message 'No route to host'''. If your system panics, don't say ``My system panicked'', say (for example) ``my system panicked with the message 'free vnode isn't'''. If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. If you have difficulty getting PPP to run, describe the configuration. Which version of PPP do you use? What kind of authentication do you have? Do you have a static or dynamic IP address? What kind of messages do you get in the log file? 7. If you don't get an answer immediately, or if you don't even see your own message appear on the list immediately, don't resend the message. Wait at least 24 hours. The FreeBSD mailer offloads messages to a number of subordinate mailers around the world, and sometimes it can take several hours for the mail to get through. And once it gets through, the one person who might know the answer will probably just have gone to bed in his part of the world. 8. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question (yes, it's the same one in each case :-). You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- V: How to follow up to a question ================================= Often you will want to send in additional information to a question you have already sent. The best way to do this is to reply to your original message. This has three advantages: 1. You include the original message text, so people will know what you're talking about. Don't forget to trim unnecessary text out, though. 2. The text in the subject line stays the same (you did remember to put one in, didn't you?). Many mailers will sort messages by subject. This helps group messages together. 3. The message reference numbers in the header will refer to the previous message. Some mailers, such as mutt, can thread messages, showing the exact relationships between the messages. VI: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure you understand the question? Very frequently, the person who asks the question is confused or doesn't express himself very well. Even with the best understanding of the system, it's easy to send a reply which doesn't answer the question. This doesn't help: you'll leave the person who submitted the question more frustrated or confused than ever. If nobody else answers, and you're not too sure either, you can always ask for more information. 5. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 6. Unless there's a good reason to do otherwise, reply to the sender and to FreeBSD-questions. Many people on the FreeBSD-questions are "lurkers": they learn by reading messages sent and replied to by others. If you take a message which is of general interest off the list, you're depriving these people of their information. Be careful with group replies; lots of people send messages with hundreds of CCs. If this is the case, be sure to trim the Cc: lines appropriately. 7. Include relevant text from the original message. Trim it to the minimum, but don't overdo it. It should still be possible for somebody who didn't read the original message to understand what you're talking about. 8. Use some technique to identify which text came from the original message, and which text you add. I personally find that prepending ``> '' to the original message works best. Leaving white space after the ``> '' and leave empty lines between your text and the original text both make the result more readable. 9. Put your response in the correct place (after the text to which it replies). It's very difficult to read a thread of responses where each reply comes before the text to which it replies. 10. Most mailers change the subject line on a reply by prepending a text such as ``Re: ''. If your mailer doesn't do it automatically, you should do it manually. 11. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), please fix it. In the case of an incorrect subject line (such as ``HELP!!??''), change the subject line to (say) ``Re: Difficulties with sync PPP (was: HELP!!??)''. That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 17: 3:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id 079BD37B41D; Fri, 3 May 2002 17:02:05 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", third edition: errata and addenda Message-Id: <20020504000205.079BD37B41D@hub.freebsd.org> Date: Fri, 3 May 2002 17:02:05 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, third edition Last revision: 2 August 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the third edition, formatted on 17 May 1999. You'll find this information on page iv (the page before the beginning of the Table of Contents). See the end of this document for instructions on how to find the errata for an older version. You can get the current document in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ps. See page 302 of the third edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-3.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at Page ii _______ The instructions on page ii (opposite the title page) tell you to look at ftp://ftp.lemis.com/pub/cfbsd/errata-2 for the errata list. That's wrong. Look at this list. Pages 190 and 191 _________________ The description is not very clear about which text appears when booting from floppy for initial install, and which appears when booting normally. The procedure is very similar, but there are some differences. Add the following text after the heading Boot messages: You'll boot your system in at least two different ways: initially you'll boot from floppy or CD-ROM in order to install the system. Later, after the system is installed, you'll boot from hard disk. The procedure is almost identical, so we'll look at both versions in the following examples. Replace the text from the middle of page 191 with: If you're booting from 1.44 MB floppies, you will then see: Please insert MFS root floppy and press enter: When you insert the MFS root floppy and press Enter, you see more twirling batons, then the UserConfig screen appears. UserConfig: Modifying the boot configuration ____________________________________________ After the kernel has been loaded, the following screen will appear if you are installing the system, or if you have requested it with the -c option to the boot loader: Page 206 ________ The bottom two lines on this page should be in bold constant font, indicating that this is input for your /etc/rc.config file Page 2 Errata and addenda for the Complete FreeBSD, third edition nfs_client_enable="YES" # This host is an NFS client (or NO). nfs_server_enable="YES" # This host is an NFS server (or NO). Page 265 ________ The example on the second half of the page refers to the old SCSI driver. The scsi program is no longer available in FreeBSD 3.x. Instead, use the camcontrol program. Replace the text with:. Modern disks make provisions for recovering from such errors by allocating an alternate sector for the data. IDE drives do this automatically, but with SCSI drives you have the option of enabling or disabling reallocation. Usually it is turned on when you buy them, but occasionally it is not. When installing a new disk, you should check that the parameters ARRE (Auto Read Reallocation Enable) and AWRE (Auto Write Reallocation Enable) are turned on. For example, to check and set the values for disk da1, you would enter: # camcontrol modepage da1 -m 1 -e -P 3 # scsi -f /dev/rda1c -m 1 -e -P 3 This command will start up your favourite editor (either the one specified in the EDITOR environment variable, or vi by default) with the following data: AWRE (Auto Write Reallocation Enbld): 0 ARRE (Auto Read Reallocation Enbld): 1 TB (Transfer Block): 0 RC (Read Continuous): 0 EER (Enable Early Recovery): 0 PER (Post Error): 0 DTE (Disable Transfer on Error): 0 DCR (Disable Correction): 0 Read Retry Count: 16 Correction Span: 41 Head Offset Count: 0 Data Strobe Offset Count: 0 Write Retry Count: 16 Recovery Time Limit: 0 The values for AWRE and ARRE should both be 1. If they aren't, as in this case, where AWRE is 0, change the data with the editor, save it, and exit. The camcontrol program will write the data back to the disk and enable the option. Page 3 The Complete FreeBSD Page 331 ________ The description of the config refers to the SCSI drive sd0. This is the old name; in FreeBSD version 3, SCSI drives are called da, so this reference should be da0. Thanks to Francisco Reyes for pointing out this problem. Page 362 ________ Replace the text at the top of the page with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention, and to Francisco Reyes and Bill Fumerola for pointing out that it still wasn't fixed in the third edition. Page 409 ________ The information on setting the default routers specified the wrong end of the PPP links in some places. It should always be the ``far'' end of the link. Replace the second example on page 409, and the text following it, with this text: defaultrouter="139.130.136.129" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="YES" # Set to YES if this host will be a gateway. This is the normal way to set the default route on a point-to-point interface. In fact, for PPP you don't need to specify the default address: the PPP packages will set it for you when the link comes up. This makes it possible to Page 4 Errata and addenda for the Complete FreeBSD, third edition set default routes when you're forced to use dynamic IP addresses, where you don't know the address at this point. We'll see how PPP does this on page 446. In the first example on page 410, the sixth example on page 412 and the second example on page 413, replace the defaultrouter definition with: defaultrouter="139.130.237.65" # Set to default gateway (or NO). Thanks to Andreas Longwitz for pointing out this error. Getting errata for older editions of the book _____________________________________________ There have been a total of five different versions of ``The Complete FreeBSD''. The most accurate way to distinguish them is by the format date, which you'll find at the bottom of page iv (the page before the beginning of the Table of Contents) in all versions of the book. 1. The first was titled ``Installing and running FreeBSD'', and was formatted on 24 February 1996. No errata list exists for this book. 2. For the first edition (19 July 1996), get ftp://ftp.lemis.com/pub/cfbsd/er- rata-1. This same file is also available via the web link http://www.lemis.com/errata-1. I am no longer updating this errata list. 3. The list for the second edition (16 December 1997) is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the second edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only Page 5 Getting errata for older editions of the book take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. 4. The revised second edition was formatted on 11 February 1999. As the name suggests, it's not a complete new edition: in fact, only three chapters are different: o The chapter ``Setting up X11'' has been brought up to date. o Appendix D (``Contents of the Ports Collection'') has been replaced by two appendixes, ``Errata and Addenda'' (the errata list up to date at the time) and ``FreeBSD 3.0'', which describes the differences between FreeBSD 2.x and FreeBSD 3.x. There is no separate errata list for this book. Refer to the second edition errata list. 5. The current, third edition, formatted on 17 May 1999. This is the correct list for this edition. Page 6 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 17: 5:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id E9C4037B400; Fri, 3 May 2002 17:02:04 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", second edition: errata and addenda Message-Id: <20020504000204.E9C4037B400@hub.freebsd.org> Date: Fri, 3 May 2002 17:02:04 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, second edition Last revision: 21 June 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the second edition, formatted on 16 December 1997. If you have this book, please check this list. If you have the first edition of 19 July 1996, please check ftp://ftp.lemis.com/pub/cfbsd/errata-1. This same file is also available via the web link http://www.lemis.com/. This list is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the book to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at General changes _______________ o In a number of places, I suggest the use of the following command to find process information: $ ps aux | grep foo Unfortunately, ps is sensitive to the column width of the terminal emulator upon which it is working. This command usually works fine on a relatively wide xterm, but if you're running on an 80-column terminal, it may truncate exactly the information you're looking for, so you end up with no output. You can fix that with the w option: $ ps waux | grep foo Thanks to Sue Blake for this information Location of the sample files ____________________________ On the 2.2.5 CD-ROM only, the location of the sample files does not match the specifications in the book (/book on the first CD-ROM). The 2.2.5 CD-ROM came out before the book, and it contains the files on the third (repository) CD-ROM as a single gzipped tar file /xperimnt/cfbsd/cfbsd.tar.gz. It contains the following files: drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/ drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/mutt/ -rw-r--r-- jkh/jkh 352 Oct 15 15:21 1997 cfbsd/mutt/.mail_aliases -rw-r--r-- jkh/jkh 9394 Oct 15 15:22 1997 cfbsd/mutt/.muttrc drwxr-xr-x jkh/jkh 0 Oct 17 14:02 1997 cfbsd/scripts/ -rw-r--r-- jkh/jkh 18281 Oct 16 16:52 1997 cfbsd/scripts/.fvwm2rc -rwxr-xr-x jkh/jkh 1392 Oct 17 12:54 1997 cfbsd/scripts/install-desktop -rw-r--r-- jkh/jkh 296 Oct 17 12:35 1997 cfbsd/scripts/.xinitrc -rwxr-xr-x jkh/jkh 622 Oct 17 13:51 1997 cfbsd/scripts/install-rcfiles -rw-r--r-- jkh/jkh 1133 Oct 17 13:00 1997 cfbsd/scripts/Uutry -rw-r--r-- jkh/jkh 1028 Oct 17 14:02 1997 cfbsd/scripts/README drwxr-xr-x jkh/jkh 0 Oct 18 19:32 1997 cfbsd/docs/ -rw-r--r-- jkh/jkh 199111 Oct 16 14:29 1997 cfbsd/docs/packages.txt Page 2 Errata and addenda for the Complete FreeBSD, second edition -rw-r--r-- jkh/jkh 189333 Oct 16 14:28 1997 cfbsd/docs/packages-by-category.txt -rw-r--r-- jkh/jkh 188108 Oct 16 14:29 1997 cfbsd/docs/packages.ps -rw-r--r-- jkh/jkh 226439 Oct 16 14:27 1997 cfbsd/docs/packages-by-category.ps -rw-r--r-- jkh/jkh 788 Oct 16 15:01 1997 cfbsd/README -rw-r--r-- jkh/jkh 248 Oct 17 11:52 1997 cfbsd/errata To extract one of these files, say cfbsd/docs/packages.txt, and assuming you have the CD-ROM mounted as /cdrom, enter: # cd /usr/share/doc # tar xvzf /cdrom/xperimnt/cfbsd/cfbsd.tar.gz cfbsd/docs/packages.txt See page 209 for more information on using tar. These files are an early version of what is described in the book. I'll put up some updated versions on ftp://ftp.lemis.com/ in the near future. Thanks to Frank McCormick for drawing this to my attention. Chapter 8: Setting up X11 _________________________ For FreeBSD 2.2.7, this chapter has changed sufficiently to make it impractical to distribute errata. You can download the PostScript version from ftp://www.lemis.com/pub/cfbsd/xsetup.ps, or the ASCII version from ftp://www.lemis.com/pub/cfbsd/xsetup.txt. No HTML version is available. Page xxxiv __________ Before the discussion of the shell prompts in the middle of the page, add: In this book, I recommend the use of the Bourne shell or one of its descendents (sh, bash, pdksh, ksh or zsh). With the exception of sh, they are all in the Ports Collection. I personally use the bash shell. This is a personal preference, and a recommendation, but it's not the standard shell. The standard BSD shell is the C shell (csh), which has a fuller- featured descendent tcsh. In particular, the standard installation sets the root user up with a csh. See page 152 (in this errata) for details of how to change the shell. Page 3 General changes Page 11: Reading the handbook _____________________________ The CD-ROM now includes Netscape. Replace the last paragraph on the page and the example on the following page with: If you're running X, you can use a browser like netscape to read the handbook. If you don't have X running yet, use lynx. Both of these programs are included on the CD-ROM. To install them, enter: # pkg_add /cdrom/packages/All/netscape-communicator-4.5.tgz or # pkg_add /cdrom/packages/All/lynx-2.8.1.1.tgz The numbers after the name (4.5 and 2.8.1.1) may change after this book has been printed. Use ls to list the names if you can't find these particular versions. Note that lynx is not a complete substitute for netscape: since it is text- only, it is not capable of displaying the large majority of web pages correctly. It will suffice for reading most of the handbook, however. Thanks to Stuart Henderson and for drawing this to my attention. Page 12: Printing the handbook ______________________________ The instructions for formatting the handbook are obsolete. Replace the section starting Alternatively, you can print out the handbook with the following text: Alternatively, you can print out the handbook. You need to have the documentation sources (/usr/doc) installed on your system. You can find them on the second CD-ROM in the directory of the same name. To install them, first mount your CD-ROM (see page 175). Then enter: $ cd /cdrom/usr/doc/handbook $ mkdir -p /usr/doc/handbook you may need to be root for this operation $ cp -pr * /usr/doc/handbook You have a choice of formats for the output: o ascii will give you plain 7-bit ASCII output, suitable for reading on a character-mode terminal. Page 4 Errata and addenda for the Complete FreeBSD, second edition o html will give you HTML output, suitable for browsing with a web browser. o latex will give you LATEX format, suitable for further processing with TEX and LATEX. o ps will give you PostScript output, probably the best choice for printing. o roff will give you output in troff source. You can process this output with nroff or troff, but it's currently not very polished. LATEX output is a better choice if you want to process it further. Once you have decided your format, use make to create the document. For example, if you decide on PostScript format, you would enter: $ make FORMATS=ps This creates a file handbook.ps which you can then print to a PostScript printer or with the aid of ghostscript (see page 222). Thanks to Bob Beer for drawing this to my attention. Page 45: Preparing floppies for installation _____________________________________________ Replace the paragraph below the list of file names (in the middle of the page) with: The floppy set should contain the file bin.inf and the ones whose names start with bin. followed by two letters. These other files are all 240640 bytes long, except for the final one which is usually shorter. Use the MS-DOS COPY program to copy as many files as will fit onto each disk (5 or 6) until you've got all the distributions you want packed up in this fashion. Copy each distribution into subdirectory corresponding to the base name--for example, copy the bin distribution to the files A:\BIN\BIN.INF, A:\BIN\BIN.AA and so on. Page 80 and 81 ______________ In a couple of examples, the FreeBSD partition is shown as type 164. It should be 165. Thanks to an unknown contributer for this correction (sorry, I lost your name). Page 5 General changes Page 88: setting up for dumping _______________________________ The example mentions a variable savecore in /etc/rc.conf. This variable is no longer used--it's enough to set the variable dumpdev. Page 92 _______ At the end of the section How to install a package add the text: Alternatively, you can install packages from the /stand/sysinstall Final Configuration Menu. We saw this menu on page in figure 4-14 on page 71. When you start sysinstall from the command line, you get to this menu by selecting Index, and then selecting Configure. Page 93 _______ Before the heading Install ports from the first CD-ROM add: Install ports when installing the system ________________________________________ The file ports/ports.tgz on the first CD-ROM is a tar archive containing all the ports. You can install it with the base system if you select the Custom distribution and include the ports collection. If you didn't install them at the time, use the following method to install them all (about 40 MB). Make sure your CD-ROM is mounted (in this example on /cdrom), and enter: Page 96 _______ Replace the example at the top of the page with: Instead, do: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # for i in *; do > ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i > done Page 6 Errata and addenda for the Complete FreeBSD, second edition If you're using csh or tcsh, enter: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # foreach i (*) ? ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i ? end Thanks to Christopher Raven and Francois Jacques for drawing this to my attention. Page 104 ________ The examples at the bottom of the page and the top of the next page specify the wrong directory (/usr). It should be /usr/X11R6. Replace the examples with: For a full install, choose /cdrom/dists/XF86331/X331*.tgz. If you are using sh, enter: # cd /usr/X11R6 # for i in /cdrom/dists/XF86331/X331*.tgz; do # tar xzf $i # done If you are using csh, enter: % cd /usr/X11R6 % foreach i (/cdrom/dists/XF86331/X331*.tgz) % tar xzf $i % end For a minimal installation, first choose a server archive corresponding to your VGA board. If table 8-2 on page 103 doesn't give you enough information, check the server man pages, starting on page 1545, which list the VGA chip sets supported by each server. For example, if you have an ET4000 based board you will use the XF86_SVGA server. In this case you would enter: # cd /usr/X11R6 # tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here # for i in bin fnts lib xicf; do # tar xzf /cdrom/dists/XF86331/X331$i.tgz # done Page 7 Install ports when installing the system If you are using csh, enter: % cd /usr/X11R6 % tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here % foreach i (bin fnts lib xicf) % tar xzf /cdrom/dists/XF86331/$i % end Thanks to Manuel Enrique Garcia Cuesta for pointing out this one. Page 128 ________ Replace the complete text below the example with the following: These values are defaults, and many are either incorrect for FreeBSD (for example the device name /dev/com1) or do not apply at all (for example Xqueue). If you are configuring manually, select one Protocol and one Device entry from the following selection. If you must use a two-button mouse, uncomment the keyword Emulate3Buttons--in this mode, pressing both mouse buttons simultane- ously within Emulate3Timeout milliseconds causes the server to report a middle button press. Section "Pointer" Protocol "Microsoft" for Microsoft protocol mice Protocol "MouseMan" for Logitech mice Protocol "PS/2" for a PS/2 mouse Protocol "Busmouse" for a bus mouse Device "/dev/ttyd0" for a mouse on the first serial port Device "/dev/ttyd1" for a mouse on the second serial port Device "/dev/ttyd2" for a mouse on the third serial port Device "/dev/ttyd3" for a mouse on the fourth serial port Device "/dev/psm0" for a PS/2 mouse Device "/dev/mse0" for a bus mouse Emulate3Buttons only for a two-button mouse EndSection You'll notice that the protocol name does not always match the manufacturer's Page 8 Errata and addenda for the Complete FreeBSD, second edition name. In particular, the Logitech protocol only applies to older Logitech mice. The newer ones use either the MouseMan or Microsoft protocols. Nearly all modern serial mice run one of these two protocols, and most run both. If you are using a bus mouse or a PS/2 mouse, make sure that the device driver is included in the kernel. The GENERIC kernel contains drivers for both mice, but the PS/2 driver is disabled. Use UserConfig (see page 50) to enable it. Page 140 ________ Just before the paragraph The super user add the following paragraph: If you do manage to lose the root password, all may not be lost. Reboot the machine to single user mode (see page 157), and enter: # mount -u / mount root file system read/write # mount /usr mount /usr file system (if separate) # passwd root change the password for root Enter new password: Enter password again: # ^D enter ctrl-D to continue with startup If you have a separate /usr file system (the normal case), you need to mount it as well, since the passwd program is in the directory /usr/bin. Note that you should explicitly state the name root: in single user mode, the system doesn't have the concept of user IDs. Page 148 ________ Replace the text at the top of the page with: Modern shells supply command line editing which resembles the editors vi or Emacs. In bash, sh, ksh, and zsh you can make the choice by entering Page 152 ________ After figure 10-8, add the following text: It would be tedious for every user to put settings in their private initialization files, so the shells also read a system-wide default file. For the Bourne shell family, it is /etc/profile, while the C shell family has three Page 9 Install ports when installing the system files: /etc/csh.login to be executed on login, /etc/csh.cshrc to be executed when a new shell is started after you log in, and /etc/csh.logout to be executed when you stop a shell. The start files are executed before the corresponding individual files. In addition, login classes (page 141) offer another method of setting environment variables at a global level. Changing your shell ___________________ The FreeBSD installation gives root a C shell, csh. This is the traditional Berkeley shell, but it has a number of disadvantages: command line editing is very primitive, and the script language is significantly different from that of the Bourne shell, which is the de facto standard for shell scripts: if you stay with the C shell, you may still need to understand the Bourne shell. The latest version of the Bourne shell sh also includes some command line editing. See page 148 for details of how to enable it. You can get better command line editing with tcsh, in the Ports Collection. You can get both better command line editing and Bourne shell syntax with bash, also in the Ports Collection. If you have root access, you can use vipw to change your shell, but there's a more general way: use chsh (Change Shell). Simply run the program. It starts your favourite editor (as defined by the EDITOR environment variable). Here's an example before: #Changing user database information for velte. Shell: /bin/csh Full Name: Jack Velte Location: Office Phone: Home Phone: You can change anything after the colons. For example, you might change this to: #Changing user database information for velte. Shell: /usr/local/bin/bash Full Name: Jack Velte Location: On the road Office Phone: +1-408-555-1999 Home Phone: Page 10 Errata and addenda for the Complete FreeBSD, second edition chsh checks and updates the password files when you save the modifications and exit the editor. The next time you log in, you get the new shell. chsh tries to ensure you don't make any mistakes--for example, it won't let you enter the name of a shell which isn't mentioned in the file /etc/shells--but it's a very good idea to check the shell before logging out. You can try this with su, which you normally use to become super user: bumble# su velte Password: su-2.00$ note the new prompt There are a couple of problems in using tcsh or bash as a root shell: o The shell for root must be on the root file system, otherwise it will not work in single user mode. Unfortunately, most ports of shells put the shell in the directory /usr/local/bin, which is almost never on the root file system. o Most shells are dynamically linked: they rely on library routines in files such as /usr/lib/libc.a. These files are not available in single user mode, so the shells won't work. You can solve this problem by creating statically linked versions of the shell, but this requires programming experience beyond the scope of this book. If you can get hold of a statically linked version, perform the following steps to install it: o Copy the shell to /bin, for example: # cp /usr/local/bin/bash /bin o Add the name of the shell to /etc/shells, in this example the line in bold print: # List of acceptable shells for chpass(1). # Ftpd will not allow users to connect who are not using # one of these shells. /bin/sh /bin/csh /bin/bash You can then change the shell for root as described above. Page 11 Install ports when installing the system Thanks to Lars Koller for drawing this to my attention. Page 160 ________ Replace the text at the fourth bullet with the augmented text: The second-level boot locates the kernel, by default the file /kernel on the root file system, and loads it into memory. It prints the Boot: prompt at this point so that you can influence this choice--see the man page on page 579 for more details of what you can enter at this prompt. Page 169 ________ Replace the last paragraph on the page with: The standard solution for these problems is to relocate the /tmp file system to a different directory, say /usr/tmp, and create a symbolic link from /usr/tmp to /tmp--see Chapter 4, Installing FreeBSD, page 72, for more details. Thanks to Charlie Sorsby for drawing this to my attention. Page 176 ________ Add the following paragraph Unmounting file systems When you mount a file system, the system assumes it is going to stay there, and in the interests of efficiency it delays writing data back to the file system. This is the same effect we discussed on page 158. As a result, if you want to stop using a file system, you need to tell the system about it. You do this with the umount command. Note the spelling--there's no n in the command name. You need to do this even with read-only media such as CD-ROMs: the system assumes it can access the data from a mounted file system, and it gets quite unhappy if it can't. Where possible, it locks removable media so that you can't remove them from the device until you unmount them. Using umount is straightforward: just tell it what to unmount, either the device name or the directory name. For example, to unmount the CD-ROM we Page 12 Errata and addenda for the Complete FreeBSD, second edition mounted in the example above, you could enter one of these commands: # umount /dev/cd1a # umount /cd1 Before unmounting a file system, umount checks that nobody is using it. If somebody is using it, it will refuse to unmount it with a message like umount: /cd1: Device busy. This message often occurs because you have changed your directory to a directory on the file system you want to remove. For example (which also shows the usefulness of having directory names in the prompt): === root@freebie (/dev/ttyp2) /cd1 16 -> umount /cd1 umount: /cd1: Device busy === root@freebie (/dev/ttyp2) /cd1 17 -> cd === root@freebie (/dev/ttyp2) ~ 18 -> umount /cd1 === root@freebie (/dev/ttyp2) ~ 19 -> Thanks to Ken Deboy for pointing out this omission. Page 180 ________ The example in the middle of the page should read: For example, to generate a second set of 32 pseudo-terminals, enter: # cd /dev # ./MAKEDEV pty1 You can generate up to 256 pseudo-terminals. They are named ttyp0 through ttypv, ttyq0 through ttyqv, ttyr0 through ttyrv, ttys0 through ttysv, ttyP0 through ttyPv, ttyQ0 through ttyQv, ttyR0 through ttyRv and ttyS0 through ttySv. To create each set of 32 terminals, use the number of the set: the first set is pty0, and the eighth set is pty7. Note that some processes, such as xterm, only look at ttyp0 through ttysv. Thanks to Karl Wagner for pointing out this error. Page 197, first line ____________________ The text of the first full sentence reads: Page 13 Install ports when installing the system The first name, up the the symbol, is the label. In fact, it should read: The first name, up to the | symbol, is the label. Page 208, middle of page ________________________ The example shows the file name /dev/rst0 when using the Bourne shell, and /dev/nrst0 when using C shell and friends. This is inconsistent; use /dev/nrst0 with any shell if you want a non-rewinding tape, or /dev/rst0 if you want a rewinding tape. Thanks to Norman C Rice for pointing out this one. Page 219 ________ Before the section Testing the spooler add the following section: As we saw above, the line printer daemon lpd is responsible for printing spooled jobs. By default it isn't started at boot time. If you're root, you can start it by name: # lpd Normally, however, you will want it to be started automatically when the system starts up. You do this by setting the variable lpd_enable in /etc/rc.conf: lpd_enable="YES" # Run the line printer daemon See page for more details of /etc/rc.conf. Another line in /etc/rc.conf refers to the line printer daemon: lpd_flags="" # Flags to lpd (if enabled). You don't normally need to change this line. See the man page for lpd for details of the flags. Thanks to Tommy G. James for bringing this to my attention. Page 14 Errata and addenda for the Complete FreeBSD, second edition Page 231 ________ Replace the first line of the example with: xhost presto bumble gw The original version allowed anybody on the Internet to access your system. Thanks to Jerry Dunham for drawing this one to my attention. Page 237 ________ In the section Installing the sample desktop, replace the first paragraph with: You'll find all the files described in this chapter on the first CD-ROM (Installation CD-ROM) in the directory /book. Remember that you must mount the CD-ROM before you can access the files--see page 175 for further details. The individual scripts are in the directory /book/scripts, but you'll probably find it easier to install them with the script install-desktop: Thanks to Chris Kaiser for drawing this to my attention. Page 242 ________ The instructions for extracting the source files from CD-ROM in the middle of page 242 are incorrect. You'll find the kernel sources on the first CD-ROM in the directory /src. Replace the example with: # mkdir -p /usr/src/sys # ln -s /usr/src/sys /sys # cd / # cat /cdrom/src/ssys.[a-d]* | tar xzvf - Thanks to Raymond Noel , Suttipan Limanond and Satwant for finding this one in several small slices. Page 15 Install ports when installing the system Page 257 ________ Replace the paragraph Berkeley Packet Filter with: pseudo-device bpfilter ______________________ The Berkeley Packet Filter (bpf) allows you to capture packets crossing a network interface to disk or to examine them with the tcpdump program. Note that this capability represents a significant compromise of network security. The number after bpfilter is the number of concurrent processes that can use the facility. Not all network interfaces support bpf. In order to use the Berkeley Packet Filter, you must also create the device nodes /dev/bpf0 to /dev/bpf3 (if you're using the default number 4). Current- ly, MAKEDEV doesn't help much--you need to create each device separately: # cd /dev # ./MAKEDEV bpf0 # ./MAKEDEV bpf1 # ./MAKEDEV bpf2 # ./MAKEDEV bpf3 Thanks to Christopher Raven for drawing this to my attention. Page 264 ________ In the list of disk driver flags, add: o Bit 12 (0x1000) enables LBA (logical block addressing mode). If this bit is not set, the driver accesses the disk in CHS (cylinder/head/sector) mode. o In CHS mode, if bits 11 to 8 are not equal to 0, they specify the number of heads to assume (between 1 and 15). The driver recalculates the number of cylinders to make up the total size of the disk. Page 16 Errata and addenda for the Complete FreeBSD, second edition Page 273, ``Building the kernel'' _________________________________ Replace the example with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention. Page 283, ``Creating the source tree'' ______________________________________ Add a third point to what you need to know: 3. Possibly, the date of the last update that you want to be included in the checkout. If you specify this date, cvs ignores any more recent updates. This option is often useful when somebody discovers a recently introduced bug in -CURRENT: you check out the modules as they were before the bug was introduced. You specify the date with the -D option, for example -D "10 December 1997". Page 285, after the second example. ___________________________________ Add the text: If you need to check out an older version, for example if there are problems with the most recent version of -CURRENT, you could enter: # cvs co -D "10 December 1997" src/sys This command checks out the kernel sources as of 10 December 1997. Page 17 Install ports when installing the system Page 294 ________ Add the following section: Problems executing Linux binaries _________________________________ One of the problems with the ELF format used by more recent Linux binaries is that they usually contain no information to identify them as Linux binaries. They might equally well be BSD/OS or UnixWare binaries. That's not really a problem at this point, since the only ELF format that FreeBSD 3.2 understands is Linux, but FreeBSD-CURRENT recognizes a native FreeBSD ELF format as well, and of course that's the default. If you want to run a Linux ELF binary on such a system, you must brand the executable using the program brandelf. For example, to brand the StarOffice program swriter3, you would enter: # brandelf -t linux /usr/local/StarOffice-3.1/linux-x86/bin/swriter3 Thanks to Dan Busarow for bringing this to my attention. Page 364, middle of page ________________________ Change the text from: The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though they may be in lower case. to The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though newer versions of ppp allow you to write them in lower case. Thanks to Mark S. Reichman for this correction. Page 368 ________ Replace the paragraph after the second example with: In FreeBSD version 3.0 and later, specify the options PPP_BSDCOMP and Page 18 Errata and addenda for the Complete FreeBSD, second edition PPP_DEFLATE to enable two kinds of compression. You'll also need to specify the corresponding option in Kernel PPP's configuration file. These options are not available in FreeBSD version 2. Thanks to Brian Somers for this information. Page 397 ________ In the section ``Nicknames'', the example should read: www IN CNAME freebie ftp IN CNAME presto In other words, there should be a space between CNAME and the system name. Page 422 ________ Replace the text above the example with: tcpdump is a program which monitors a network interface and displays selected information which passes through it. It uses the Berkeley Packet Filter (bpf), an optional component of the kernel. It is not included in the GENERIC kernel: see page 257 for information on how to configure it. If you don't configure the Berkeley Packet Filter, you will get a message like tcpdump: /dev/bpf0: device not configured If you forget to create the devices for bpf, you will get a message like: tcpdump: /dev/bpf0: No such file or directory Since tcpdump poses a potential security problem, you must be root in order to run it. The simplest way to run it is without any parameters. This will cause tcpdump to monitor and display all traffic on the first active network interface, normally Ethernet: Thanks to Christopher Raven for drawing this to my attention. Page 19 Install ports when installing the system Page 423 ________ The description at the top of the page incorrectly uses the term IP address instead of Ethernet address. In addition, a page number reference is incorrect. Replace the paragraph with: o Line 1 shows an ARP request: system presto is looking for the Ethernet address of wait. It would appear that wait is currently not responding, since there is no reply. o Line 2 is not an IP message at all. tcpdump shows the Ethernet addresses and the beginning of the packet. We don't consider this kind of request in this book. o Line 3 is a broadcast ntp message. We looked at ntp on page 160. o Line 4 is another attempt by presto to find the IP address of wait. o Line 5 is a broadcast message from bumble on the rwho port, giving information about its current load averages and how long it has been up. See the man page for rwho on page 1167 for more information. o Line 6 is from a TCP connection between port 6000 on freebie and port 1089 on presto. It is sending 384 bytes (with the sequence numbers 536925467 to 536925851; see page 305), and is acknowledging that the last byte it received from presto had the sequence number 325114346. The window size is 17280. o Line 7 is another ARP request. presto is looking for the Ethernet address of freebie. How can that happen? We've just seen that they have a TCP connection. In fact, ARP information expires after 20 minutes. It's quite possible that all connections between presto and freebie have been dormant for this period, so presto needs to find freebie's IP address again. o Line 8 is the ARP reply from freebie to presto giving its Ethernet address. o Line 9 shows a reply from presto on the connection to freebie that we saw on line 6. It acknowledges the data up to sequence number 536925851, but doesn't send any itself. o Line 10 shows another 448 bytes of data from freebie to presto, and acknowledging the same sequence number from presto as in line 6. Thanks to Sergei S. Laskavy for drawing this to my Page 20 Errata and addenda for the Complete FreeBSD, second edition attention. Page 450: anonymous ftp _______________________ Replace the paragraph starting with Create a user ftp: Create a user ftp, with the anonymous ftp directory as the home directory and the shell /dev/null. Using /dev/null as the shell makes it impossible to log in as user ftp, but does not interfere with the use of anonymous ftp. ftp can be a member of group bin, or you can create a new group ftp by adding the group to /etc/group. See page 138 for more details of adding users, and the man page on page 805 for adding groups. Thanks to Mark S. Reichman for drawing this to my attention. Page 466, before the ps example _______________________________ Add another bullet: o Finally, you may find it convenient to let some other system handle all your mail delivery for you: you just send anything you can't deliver locally to this other host, which sendmail calls a smart host. This is particularly convenient if you send your mail with UUCP. To tell sendmail to use a smart host (in our case, mail.example.net), find the following line in sendmail.cf: # "Smart" relay host (may be null) DS Change it to: # "Smart" relay host (may be null) DSmail.example.net Page 478, ``Running Apache'' ____________________________ The text describes the location of the server as /usr/local/www/server/httpd. This appears to depend on where you get the port from. Some people report the file being at the more likely location /usr/local/sbin/httpd (though note the Page 21 Install ports when installing the system directory sbin, not bin). Check both locations if you run into trouble. Thanks to Sue Blake for this information. Page 492 ________ Replace references to nmdb with nmbd. Page 493 ________ Replace the last paragraph on the page with: socket options is hardly mentioned in the documentation, but it's very important: many Microsoft implementations of TCP/IP are inefficient and establish a new TCP more often than necessary. Select the socket options TCP_NODELAY and IPTOS_LOWDELAY, which can speed up the response time of such applications by over 95%. Page 22 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 17:15:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out4.mx.nwbl.wi.voyager.net (out4.mx.nwbl.wi.voyager.net [169.207.1.77]) by hub.freebsd.org (Postfix) with ESMTP id 1B0C437B416 for ; Fri, 3 May 2002 17:15:34 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out4.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g440FXTN018719; Fri, 3 May 2002 19:15:33 -0500 Received: from localhost (raiden@localhost) by shell.core.com (8.11.6/8.11.6/1.3) with ESMTP id g440FXs14889; Fri, 3 May 2002 19:15:33 -0500 (CDT) Date: Fri, 3 May 2002 19:15:33 -0500 (CDT) From: Steven Lake X-X-Sender: raiden@shell.core.com To: Edwin Groothuis Cc: Steven Lake , Subject: Re: Ping of death? In-Reply-To: <20020504090857.E56548@k7.mavetju.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Ok, I got my solution. I'm getting hammered from one of our routers on one of our remote lans. Problem fixed and offending device pitched off the highest building available. :) thanks guys. On Sat, 4 May 2002, Edwin Groothuis wrote: > On Fri, May 03, 2002 at 05:58:20PM -0500, Steven Lake wrote: > > Does anyone have a way to monitor incoming traffic to find out if > > you're being hit with a dos attack or should I ring telco again and have > > them do a test on the T1 line to find the source? > > Try simple tools like tcpdump (tcpdump -ni ) and trafshow > (/usr/ports/net/trafshow). At least it will tell you what is going on. > > Edwin > > -- > Edwin Groothuis | Personal website: http://www.MavEtJu.org > edwin@mavetju.org | Interested in MUDs? Visit Fatal Dimensions: > bash$ :(){ :|:&};: | http://www.FatalDimensions.org/ > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 17:59:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out0.mx.nwbl.wi.voyager.net (out0.mx.nwbl.wi.voyager.net [169.207.1.78]) by hub.freebsd.org (Postfix) with ESMTP id 9E31C37B416 for ; Fri, 3 May 2002 17:59:56 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out0.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g44127bJ018543 for ; Fri, 3 May 2002 20:02:07 -0500 Received: from localhost (raiden@localhost) by shell.core.com (8.11.6/8.11.6/1.3) with ESMTP id g440xte22610 for ; Fri, 3 May 2002 19:59:55 -0500 (CDT) Date: Fri, 3 May 2002 19:59:55 -0500 (CDT) From: Steven Lake X-X-Sender: raiden@shell.core.com To: freebsd-questions@FreeBSD.ORG Subject: Port for web stats?? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What's the port that will allow me to parse my apache web logs and view my stats? Like what pages where viewed, how many times, etc. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 18: 6:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.mail.pas.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 0B90C37B41B for ; Fri, 3 May 2002 18:06:06 -0700 (PDT) Received: from user-119a2km.biz.mindspring.com ([66.149.10.150] helo=scee.dsj.net) by swan.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173nzs-0001SS-00; Fri, 03 May 2002 18:06:00 -0700 Received: from dsj by scee.dsj.net with local (Exim 3.35 #1 (Debian)) id 173o06-0008U6-00; Fri, 03 May 2002 21:06:14 -0400 Date: Fri, 3 May 2002 21:06:14 -0400 From: "David S. Jackson" To: Joe Marcus Clarke Cc: "David S. Jackson" , freebsd-questions@FreeBSD.ORG Subject: Re: can't compile gnomecore Message-ID: <20020504010614.GB12237@scee.dsj.net> Reply-To: "David S. Jackson" References: <20020503155646.GA12354@scee.dsj.net> <1020441722.784.12.camel@gyros.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1020441722.784.12.camel@gyros.marcuscom.com> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 12:02:01PM -0400 Joe Marcus Clarke wrote: > On Fri, 2002-05-03 at 12:56, David S. Jackson wrote: > > Hi, > > > > I cvsupped everything recently (rebuilt, reinstalled) and I'm upgrading > > gnome accordingly. However, in trying to compile gnomecore, I get the > > following: > > You need to update all your GNOME dependencies first. Looks like gtk > might be out of date or perhaps damaged. You might try a forced update > of gtk12, and make clean, then rebuild gnomecore. See if things > improve. I did a make clean in gtk12 and rebuilt from scratch. No errors. Did a make clean on gnomecore, tried to remake, same problem. Problem is in In file included from gnome-vfs-mime-private.h:26, from gnome-vfs-application-registry.c:32: ../libgnomevfs/gnome-vfs-mime-monitor.h:28: gtk/gtkobject.h: No such file or directory In file included from gnome-vfs-mime-private.h:26, from gnome-vfs-application-registry.c:32: ../libgnomevfs/gnome-vfs-mime-monitor.h:31: syntax error before `GtkObject' gmake[3]: *** [gnome-vfs-application-registry.lo] Error 1 gmake[3]: Leaving directory `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' Looks like a syntax error: gtkobject.h exists and is aparently up to date. So, what do you mean by a "forced update"? Portupgrade gtk12 or gnomecore? -- David S. Jackson dsj@dsj.net =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= If God had wanted us to be concerned for the plight of the toads, he would have made them cute and furry. -- Dave Barry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 18:10:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from uclink4.berkeley.edu (uclink4.Berkeley.EDU [128.32.25.39]) by hub.freebsd.org (Postfix) with ESMTP id 2D37B37B41A for ; Fri, 3 May 2002 18:10:18 -0700 (PDT) Received: from bearmail.berkeley.edu (bearmail.Berkeley.EDU [169.229.132.38]) by uclink4.berkeley.edu (8.11.4/8.11.4) with ESMTP id g441AHO25125 for ; Fri, 3 May 2002 18:10:17 -0700 (PDT) X-WebMail-UserID: emrys Date: Fri, 3 May 2002 18:09:00 -0700 From: Emrys Ingersoll To: freebsd-questions@FreeBSD.ORG X-EXP32-SerialNo: 00003427, 00003483 Subject: releng4.freebsd.org Message-ID: <3CD48DA6@bearmail.berkeley.edu> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Mailer: WebMail (Hydra) SMTP v3.61.08 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, My name is Emrys Ingersoll and I am planning on doing a fresh install of FreeBSD 4.5-RELEASE. I know since January there have been some updates to this version of FreeBSD, making it 4.5-RELEASE-p4. I have read that it is possible to install 4.5-RELEASE-p4 from the start, thus saving me the hassle of installing the old 4.5 and then updating via CVS and then doing a buildworld. I have read that the proper thing to do is install 4.5-RELEASE-p4 from the releng4.freebsd.org FTP site. I tried this but I cannot gain access to the FTP site. Is it going to be accessible any time soon, or should I go about obtaining 4.5-RELEASE-p4 a different way. Thank you for any assistance you can give. (if i've email this to the wrong people, please let me know =) -Emrys To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 18:13:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tierzero.apana.org.au (sa.apana.org.au [203.14.158.1]) by hub.freebsd.org (Postfix) with ESMTP id E1D1E37B405 for ; Fri, 3 May 2002 18:13:54 -0700 (PDT) Received: from there (dialup-3.pasa.apana.org.au [203.14.158.132]) by tierzero.apana.org.au (8.11.1/8.11.1) with SMTP id g441HL187952 for ; Sat, 4 May 2002 10:47:22 +0930 (CST) (envelope-from bastill@sa.apana.org.au) Message-Id: <200205040117.g441HL187952@tierzero.apana.org.au> Content-Type: text/plain; charset="iso-8859-1" From: Brian Astill Reply-To: bastill@sa.apana.org.au To: Subject: X11 config wierdness Date: Sat, 4 May 2002 10:44:34 +0930 X-Mailer: KMail [version 1.3] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Greetings! My 19" monitor became sick, so I have to use the 14" backup monitor for now :-( To use the 14" monitor I went to /etc/X11 and copied XF86Config to XF86Config.19 so I could revert later. Then I invoked /stsnd/sysinstall - X configuration and chose the graphical interface and "use existing as defaults". Then altered the monitor figures to suit, chose 800x600 16bit colour, OK and left. X11 seems to work just fine on the small monitor and is certainly running at 800x600 (I had to alter my app defaults to make their windows MUCH smaller). Thought I might try to use virtual larger screens, so went to XF86Confug and discovered that NOTHING had changed, except the file's date!! What is going on, here - where is X getting its instructions from if not /etc/X11/XF86Config ?? Yes, I did check the other possible location for XF86Config - that directory is empty. Advice, anyone? -- Regards, Brian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 18:25:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.museum.rain.com (gw-ipinc.museum.rain.com [206.29.169.27]) by hub.freebsd.org (Postfix) with ESMTP id D602737B41A for ; Fri, 3 May 2002 18:25:18 -0700 (PDT) Received: from ns.museum.rain.com (localhost [127.0.0.1]) by ns.museum.rain.com (8.12.3/8.12.3) with ESMTP id g441PHeW008845; Fri, 3 May 2002 18:25:17 -0700 (PDT) (envelope-from list@ns.museum.rain.com) Received: (from list@localhost) by ns.museum.rain.com (8.12.3/8.12.3/Submit) id g441PGut008844; Fri, 3 May 2002 18:25:16 -0700 (PDT) (envelope-from list) Date: Fri, 3 May 2002 18:25:16 -0700 From: James Long To: Steven Lake Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Port for web stats?? Message-ID: <20020503182516.A8822@ns.museum.rain.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from raiden@shell.core.com on Fri, May 03, 2002 at 07:59:55PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 07:59:55PM -0500, Steven Lake wrote: > What's the port that will allow me to parse my apache web logs and > view my stats? Like what pages where viewed, how many times, etc. /usr/ports/www/webalizer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 18:35:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out0.mx.nwbl.wi.voyager.net (out0.mx.nwbl.wi.voyager.net [169.207.1.78]) by hub.freebsd.org (Postfix) with ESMTP id 754BA37B404 for ; Fri, 3 May 2002 18:35:18 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out0.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g441bSbJ022102; Fri, 3 May 2002 20:37:28 -0500 Received: from localhost (raiden@localhost) by shell.core.com (8.11.6/8.11.6/1.3) with ESMTP id g441Y6u26092; Fri, 3 May 2002 20:34:21 -0500 (CDT) Date: Fri, 3 May 2002 20:34:06 -0500 (CDT) From: Steven Lake X-X-Sender: raiden@shell.core.com To: James Long Cc: Steven Lake , Subject: Re: Port for web stats?? In-Reply-To: <20020503182516.A8822@ns.museum.rain.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thank you! On Fri, 3 May 2002, James Long wrote: > On Fri, May 03, 2002 at 07:59:55PM -0500, Steven Lake wrote: > > What's the port that will allow me to parse my apache web logs and > > view my stats? Like what pages where viewed, how many times, etc. > > /usr/ports/www/webalizer > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19: 8: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.rdc-kc.rr.com (mkc-162-200.kc.rr.com [24.94.162.200]) by hub.freebsd.org (Postfix) with ESMTP id D636237B41C for ; Fri, 3 May 2002 19:08:00 -0700 (PDT) Received: from pop-server.wi.rr.com (mke-65-31-95-21.wi.rr.com [65.31.95.21]) by smtp1.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g4427qpt015262 for ; Fri, 3 May 2002 21:07:56 -0500 (CDT) Date: Fri, 3 May 2002 21:08:02 -0500 From: Nick Lozinsky To: freebsd-questions@freebsd.org Subject: Re: mutt: what's with the users? Message-ID: <20020503210802.A71778@wi.rr.com> References: <20020503141814.A1092@wi.rr.com> <20020503141429.A70846@darwin.lastamericanempire.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020503141429.A70846@darwin.lastamericanempire.com>; from hideo@lastamericanempire.com on Fri, May 03, 2002 at 02:14:29PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 02:14:29PM -0600, Zach Thompson wrote: > * Nick Lozinsky [2002-05-03 13:18]: > > Hi, > > > > I've installed mutt, and it works, finally; along with fetchmail, > > but, the only way I can mail from mutt, is if I create a local > > user that has the same handle as the mail account that my ISP's > > mail account that I'm using, and if I name my box the same domain > > name as my ISP's domain name. If I change these parameters to > > anything else, I get an error, regarding a Child Error 127; > > Im assuming this has to do with sendmail, does this have to do > > with the -oem -oi args or is these aliasing, or forwarding in- > > volved? > > What does your ~/.fetchmailrc look like? Do your rules contain: > > ...is "localuser" here > > > where "localuser" is your login? > > > Zach Thompson Hi Zach, No, I do not have anything associated with the localhost in my fetchmail script. It all relates to the ISP's info, with the server, protocol and user and pass. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:25:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from darwin.lastamericanempire.com (dsl081-101-239.den1.dsl.speakeasy.net [64.81.101.239]) by hub.freebsd.org (Postfix) with ESMTP id D4C1637B405 for ; Fri, 3 May 2002 19:25:28 -0700 (PDT) Received: by darwin.lastamericanempire.com (Postfix, from userid 1001) id 0474C1D10C; Fri, 3 May 2002 20:25:44 -0600 (MDT) Date: Fri, 3 May 2002 20:25:43 -0600 From: Zach Thompson To: Nick Lozinsky Cc: freebsd-questions@freebsd.org Subject: Re: mutt: what's with the users? Message-ID: <20020503202543.A2246@darwin.lastamericanempire.com> References: <20020503141814.A1092@wi.rr.com> <20020503141429.A70846@darwin.lastamericanempire.com> <20020503210802.A71778@wi.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020503210802.A71778@wi.rr.com>; from kozak@wi.rr.com on Fri, May 03, 2002 at 09:08:02PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Nick Lozinsky [2002-05-03 20:08]: > On Fri, May 03, 2002 at 02:14:29PM -0600, Zach Thompson wrote: > > * Nick Lozinsky [2002-05-03 13:18]: > > > Hi, > > > > > > I've installed mutt, and it works, finally; along with fetchmail, > > > but, the only way I can mail from mutt, is if I create a local > > > user that has the same handle as the mail account that my ISP's > > > mail account that I'm using, and if I name my box the same domain > > > name as my ISP's domain name. If I change these parameters to > > > anything else, I get an error, regarding a Child Error 127; > > > Im assuming this has to do with sendmail, does this have to do > > > with the -oem -oi args or is these aliasing, or forwarding in- > > > volved? > > > > What does your ~/.fetchmailrc look like? Do your rules contain: > > > > ...is "localuser" here > > > > > > where "localuser" is your login? > > > > > > Zach Thompson > > Hi Zach, > > No, I do not have anything associated with the localhost in my > fetchmail script. It all relates to the ISP's info, with the > server, protocol and user and pass. > I would give it try. From the fetchmail manpage: A single local name can be used to support redirecting your mail when your username on the client machine is dif- ferent from your name on the mailserver. When there is only a single local name, mail is forwarded to that local username regardless of the message's Received, To, Cc, and Bcc headers. For instance, poll pop3.somewhere.net proto pop3 user "SomeGuy" pass "bleh" is "sguy" here; should deliver fetched mail to /var/mail/sguy. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:30:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.rdc-kc.rr.com (mkc-162-200.kc.rr.com [24.94.162.200]) by hub.freebsd.org (Postfix) with ESMTP id 4C76B37B416 for ; Fri, 3 May 2002 19:30:09 -0700 (PDT) Received: from pop-server.wi.rr.com (mke-65-31-95-21.wi.rr.com [65.31.95.21]) by smtp1.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g442U5pt001868 for ; Fri, 3 May 2002 21:30:05 -0500 (CDT) Date: Fri, 3 May 2002 21:30:15 -0500 From: Nick Lozinsky To: freebsd-questions@freebsd.org Subject: Re: mutt: what's with the users? Message-ID: <20020503213015.A72192@wi.rr.com> References: <20020503141814.A1092@wi.rr.com> <20020503141429.A70846@darwin.lastamericanempire.com> <20020503210802.A71778@wi.rr.com> <20020503202543.A2246@darwin.lastamericanempire.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020503202543.A2246@darwin.lastamericanempire.com>; from hideo@lastamericanempire.com on Fri, May 03, 2002 at 08:25:43PM -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Zach, Thank you; it works fine now; the problem was with the my_hdr portion of the script. Now, onto messing with the colors :) BTW, I've changes the colors in the script, and cannot see the difference when running mutt from an xterm, is there a dirrerent option at build-time to enable this? Nick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:39:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gladstone.uoregon.edu (gladstone.uoregon.edu [128.223.142.14]) by hub.freebsd.org (Postfix) with ESMTP id ABC9F37B416 for ; Fri, 3 May 2002 19:39:32 -0700 (PDT) Received: from anholt (anholt@d184-101.uoregon.edu [128.223.184.101]) by gladstone.uoregon.edu (8.12.3/8.12.3) with ESMTP id g442dVrX003286 for ; Fri, 3 May 2002 19:39:31 -0700 (PDT) Subject: rl watchdog timeouts From: Eric Anholt To: questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 03 May 2002 20:39:33 -0600 Message-Id: <1020479973.1792.73.camel@anholt.dyndns.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I'm hoping someone can help me with some problems with a realtek 8139B ethernet on -current (kernel from May 2 2002). It's a dell system I'm trying to netboot (using etherboot for rtk8139 on a floppy) to play with the i810. In windows I see that the irq is 10 and the memory address agrees with what's below. When I boot I see this output (copying by hand): rl0: port 0x2c00-0x2cff at device 10.0 on pci1 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode pci_cfgintr_search: linked (62) to configured irq 9 at 0:31:3 pci_cfgintr: 0:30 INTC routed to irq 9 pcib1: routed slot 10 INTA to irq9 rl0:Ethernet address Then when it goes to BOOTP I get: Sending DHCP Discover packet from interface rl0 rl0: watchdog timeout DHCP/BOOTP timeout for server 255.255.255.255 I've looked through the bios for pnp-related options, but there's just the "reserve irq for whatever" options and nothing related to PNP OS that I could find. I statically compiled a hint to set the rl irq to 10, with no change. The kernel config is from a machine that is successfully netbooting off of a realtek, I can throw it up somewhere if it's important. Does anyone have any idea what can be done about this? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:46:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id AB56637B41D for ; Fri, 3 May 2002 19:46:13 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g442kCuF071869; Fri, 3 May 2002 20:46:13 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g442kCMg071866; Fri, 3 May 2002 20:46:12 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Fri, 3 May 2002 20:46:12 -0600 (MDT) From: Warren Block To: Marco Beishuizen Cc: FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver In-Reply-To: <20020504010626.B299-100000@yokozuna.bsd> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, Marco Beishuizen wrote: > Well, my question is how to print... Apsfilter needs to know about the > IP adress and hostname of the printer. How do I know what the hostname > and the IP adress of the JetDirect are? IP address and hostname? Or IP address and queue name? JetDirects used to have a default address of 192.0.0.192, I think, although that may not be the case any more. If you can telnet to the JetDirect, you can change the IP address and its local hostname. Some of the cheaper units may not have a default IP address assigned. You might have to run HP's JetAdmin software to configure these units initially. Dunno if there's a version of JetAdmin for anything other than Windows. After an IP address has been assigned, you can set up a hostname in /etc/hosts. (I've never been sure what purpose the hostname set in the JetDirect itself serves, other than when you have a bunch of them you can verify that you've got the right one.) There are two queue names you can use: "raw" is an untranslated queue that just passes everything through (most likely what you want), and "text" does some cooking of the input. -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:53:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 96DEB37B41A for ; Fri, 3 May 2002 19:53:48 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173pgA-0001Wj-00 for ; Sat, 04 May 2002 03:53:46 +0100 Date: Sat, 4 May 2002 03:53:46 +0100 From: Daniel Bye To: freebsd-questions@FreeBSD.ORG Subject: Re: Demote Root, Promote UserX? Message-ID: <20020504025346.GA5805@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 05:51:46PM -0500, Steven Lake wrote: > I saw something similar to this mentioned with Windows 2000 that > you could do to deture hackers, and I was curious if it's possible with > Fbsd? Can you rename the Root account or possibly demote it, then promote > a lower user account, say something along the lines of "Admin1" or > something to that respect, to the roll of root and not screw anything up? > Or if that's not possible, can you add another user with the same powers > as root while disabling root itself? > > I'm just jabbing for ideas to stop a hacker who might be hacking > in looking for the root account to take control of a machine by allowing > them to hit an account with zero privaledges and go absolutely nowhere. > Of course we plan to be monitoring and catch them if they do, but I want > to slow them down or stop them if possible using this. The important part of the "root" user account is the UID of 0. The name is totally arbitrary. It is simply convention that dictates it be called root. Take a look in the default /etc/passwd - you'll see two entries with UID 0 - "root" and "toor". The difference is simply the default shell. Both have full super-user rights, imparted by the UID. Incidentally, each account can (and probably should) have its own password. So, you can create another user account with any (legal) name, assign it UID 0, disable the "real root" user, and there you go. I believe under NT/Win2000, things are very different - every user has its own SID, as does each group. You then assign rights and permissions to these users and/or groups - no SID is of itself inherently privileged without that association. UNIX systems don't support this notion of "promoting" or "demoting" users in the same way as Windows. (As far as I know, at least) The upshot is, if your account called "root" has UID of, say, 2500, then it is only a normal user account. Likewise, an account by any name but with UID 0 is super-user. It's late, and I hope this makes sense, and isn't too wildly inaccurate... ;-) Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:58:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wantadilla.lemis.com (wantadilla.lemis.com [192.109.197.80]) by hub.freebsd.org (Postfix) with ESMTP id AD60A37B425 for ; Fri, 3 May 2002 19:58:39 -0700 (PDT) Received: by wantadilla.lemis.com (Postfix, from userid 1004) id 33B898165B; Sat, 4 May 2002 12:28:37 +0930 (CST) Date: Sat, 4 May 2002 12:28:37 +0930 From: Greg 'groggy' Lehey To: VB Cc: freebsd-questions@freebsd.org Subject: Re: good wireless card recommendation? Message-ID: <20020504122837.E24071@wantadilla.lemis.com> References: <20020503155036.D3552@sunny.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020503155036.D3552@sunny.localdomain> User-Agent: Mutt/1.3.23i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [Format recovered--see http://www.lemis.com/email/email-format.html] Overlong lines. On Friday, 3 May 2002 at 15:50:36 -0700, VB wrote: > Hi, > > I'm getting ready to head down to the local computer > super-wharehouse and bye a wireless pcmcia card. I would like it to > work with 4.4 Release, RH7.1, and W2K. Anyone have any suggestions? I've had good results with Lucent Orinocos. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 19:59:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 61DC837B416 for ; Fri, 3 May 2002 19:59:26 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173pld-0001XH-00 for ; Sat, 04 May 2002 03:59:25 +0100 Date: Sat, 4 May 2002 03:59:25 +0100 From: Daniel Bye To: freebsd-questions@FreeBSD.ORG Subject: Re: Ping of death? Message-ID: <20020504025925.GB5805@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 05:58:20PM -0500, Steven Lake wrote: > I've got one box that's got absolutely horrible access speed to > the net but it's on a T1 line and no other machine is sharing the line. > Telco has tested the line and sees nothing wrong but were unable to do a > bandwidth or data test to see if it's just traffic or not. > > The line should be pushing the full 1.544mbps, but I'm barely able > to scrape 30k out of it. Any machine that connects to it goes through the > roof on the processor useage and dogs out. So I'm suspect of a possible > ping of death, but I wanted to rule out the local equipment first. But > since anything connecting to it to test this is gagged it's impossible to > do any tests. > > Does anyone have a way to monitor incoming traffic to find out if > you're being hit with a dos attack or should I ring telco again and have > them do a test on the T1 line to find the source? Check out iplog in /usr/ports/net. tcpdump *may* be useful too. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20: 0:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from serv1.wallnet.com (server1.wallnet.com [208.225.162.122]) by hub.freebsd.org (Postfix) with ESMTP id E390737B41E for ; Fri, 3 May 2002 20:00:11 -0700 (PDT) Received: from localhost (timothyk@localhost) by serv1.wallnet.com (8.11.5/8.11.5) with ESMTP id g44309A26010; Fri, 3 May 2002 23:00:09 -0400 (EDT) (envelope-from timothyk@serv1.wallnet.com) Date: Fri, 3 May 2002 23:00:09 -0400 (EDT) From: Tim Kellers To: VB Cc: Subject: Re: good wireless card recommendation? In-Reply-To: <20020503155036.D3552@sunny.localdomain> Message-ID: <20020503225159.V24957-100000@serv1.wallnet.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I use The Wavelan (oronico) cards both 64 and 128 bit with Win2k, Win 98, and FreeBSD (4.4, 4.5 and, now, 4.6-prerelease), I have associates who have reported successfully using it with RedHat, though I'm not sure of the release version. The Telecomm department where I work suggests the Cisco Aironet card; they support Win98, Win2k and various versions of Linux --the Aironet is also supported by FreeBSD. The Aironet card has a bit more power than the Lucent/WaveLan/Oronico cards, but it's also more money. At the lower end of the spectrum is the LynkSys card. I've heard a lot of problems about that card from various sources, all second-hand, so I'd investigate that choice a lot more thoroughly before I made that purchase. The LynkSys card is less expensive than either the WaveLan or the Aironet cards. Hopr that helps, Tim Kellers CPE/NJIT On Fri, 3 May 2002, VB wrote: > Hi, > > I'm getting ready to head down to the local computer super-wharehouse and bye > a wireless pcmcia card. I would like it to work with 4.4 Release, RH7.1, and W2K. Anyone have any suggestions? > > Thx, > > Eric>> To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20: 3:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icarus.slightlystrange.org (icarus.slightlystrange.org [62.190.193.173]) by hub.freebsd.org (Postfix) with ESMTP id 086B437B404 for ; Fri, 3 May 2002 20:03:24 -0700 (PDT) Received: from danielby by icarus.slightlystrange.org with local (Exim 3.12 #1 (Debian)) id 173ppS-0001Xu-00 for ; Sat, 04 May 2002 04:03:22 +0100 Date: Sat, 4 May 2002 04:03:22 +0100 From: Daniel Bye To: freebsd-questions@freebsd.org Subject: Re: mutt: what's with the users? Message-ID: <20020504030322.GC5805@icarus.slightlystrange.org> Reply-To: dan@slightlystrange.org Mail-Followup-To: freebsd-questions@freebsd.org References: <20020503141814.A1092@wi.rr.com> <20020503141429.A70846@darwin.lastamericanempire.com> <20020503210802.A71778@wi.rr.com> <20020503202543.A2246@darwin.lastamericanempire.com> <20020503213015.A72192@wi.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20020503213015.A72192@wi.rr.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 09:30:15PM -0500, Nick Lozinsky wrote: > Zach, > > Thank you; it works fine now; the problem was with the my_hdr portion of > the script. Now, onto messing with the colors :) > > BTW, I've changes the colors in the script, and cannot see the difference > when running mutt from an xterm, is there a dirrerent option at build-time > to enable this? Try setting your TERM to xterm-color. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:10:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from bodb.mc.mpls.visi.com (bodb.mc.mpls.visi.com [208.42.156.104]) by hub.freebsd.org (Postfix) with ESMTP id 4067537B404 for ; Fri, 3 May 2002 20:10:17 -0700 (PDT) Received: from sheol.localdomain (hawkeyd-fw.dsl.visi.com [208.42.101.193]) by bodb.mc.mpls.visi.com (Postfix) with ESMTP id 2E2B54D05; Fri, 3 May 2002 22:10:16 -0500 (CDT) Received: (from hawkeyd@localhost) by sheol.localdomain (8.11.6/8.11.6) id g443ABm26508; Fri, 3 May 2002 22:10:11 -0500 (CDT) (envelope-from hawkeyd) Date: Fri, 3 May 2002 22:10:11 -0500 (CDT) Message-Id: <200205040310.g443ABm26508@sheol.localdomain> Mime-Version: 1.0 X-Newsreader: knews 1.0b.1 Reply-To: hawkeyd@visi.com Organization: if (!FIFO) if (!LIFO) break; References: <20020503163403.A4378_mail.clubplus.net@ns.sol.net> In-Reply-To: <20020503163403.A4378_mail.clubplus.net@ns.sol.net> From: hawkeyd@visi.com (D J Hawkey Jr) Subject: Re: mozilla - no text entry appears X-Original-Newsgroups: sol.lists.freebsd.questions To: david@skytrackercanada.com, freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In article <20020503163403.A4378_mail.clubplus.net@ns.sol.net>, david@skytrackercanada.com writes: > I just compiled mozilla from the ports and it seems to > operate OK other than the text does not appear in > search boxes. The text will simply not enter. > > I have an idea that this is a font thing. > I notice that I -can- enter into the search field > on google, but Yahoo's search box, which I think is > one font size smaller will not allow entry. I tried > modifying the font size in Mozilla preferences, but there are > not options that come up other than the ones installed. OK, this is pro'lly off topic, but if you mean Mozilla's own search facility (Ctrl-F or Ctrl-G), and you're running TWM or VTWM, it's a bug in the window manager. I have a fix for VTWM. Dave -- Windows: "Where do you want to go today?" Linux: "Where do you want to go tomorrow?" FreeBSD: "Are you guys coming, or what?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:20:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.eagle.ca (mail2.eagle.ca [209.167.16.30]) by hub.freebsd.org (Postfix) with ESMTP id 91CA337B41C for ; Fri, 3 May 2002 20:20:19 -0700 (PDT) Received: from afi (38.eagle.speede.com [64.39.177.38]) by mail2.eagle.ca (8.11.3/8.11.3) with SMTP id g443Cvk96938 for ; Fri, 3 May 2002 23:12:57 -0400 (EDT) (envelope-from lists@brenius.com) Message-ID: <01f201c1f31a$9a78c5b0$0200a8c0@afi> From: To: Subject: bash & csh History Date: Fri, 3 May 2002 23:20:12 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Greetings, Can someone briefly explain/describe the history architechture of these two shells: /bin/csh Where is the default (no special changes or new account) history stored? Where is the history stored once this user su's to root? /usr/local/bin/bash Same questions as above, as well as where do you adjust the how "big" your history gets for regular user and when you are logged in as root. And one last one question: What is the easiest way to setup an account already using csh that wants to use bash? Assuming the bash 2.0 port is install for example. As well as it being activated when the user su's to root. Thank you for your time, Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:24:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from natsemi-bh.nsc.com (natsemi-bh.nsc.com [204.163.202.66]) by hub.freebsd.org (Postfix) with ESMTP id 1D40537B419 for ; Fri, 3 May 2002 20:24:28 -0700 (PDT) Received: (from uucp@localhost) by natsemi-bh.nsc.com (8.8.8/8.6.11) id UAA15987 for ; Fri, 3 May 2002 20:24:27 -0700 (PDT) Received: from nsc.nsc.com(139.187.81.1) by natsemi-bh.nsc.com via smap (4.1) id xma015976; Fri, 3 May 02 20:23:54 -0700 Received: from malkauns.malkauns.nsc.com (malkauns.nsc.com [139.187.83.131]) by nsc.nsc.com (8.10.2+Sun/8.10.2) with SMTP id g443NnS03317 for ; Fri, 3 May 2002 20:23:50 -0700 (PDT) Received: from malkauns.nsc.com by malkauns.malkauns.nsc.com (SMI-8.6/SMI-SVR4) id IAA26381; Sat, 4 May 2002 08:59:25 +0530 Message-ID: <3CD35537.27B7D02@malkauns.nsc.com> Date: Sat, 04 May 2002 08:57:51 +0530 From: shubhamr Reply-To: shubhamr@malkauns.nsc.com X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-questions@freebsd.org Subject: URGENT - to remove a driver - what to do? References: <20020503163403.A4378_mail.clubplus.net@ns.sol.net> <200205040310.g443ABm26508@sheol.localdomain> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have 4.5 version installed.But some device drivers are already compiled into the kernel,and hence it runs when ever suitable ahrdware is detected. Can any one tell me how to remove this driver from the kernel so that,I can load unload dynamically(kldload,kldunload) and get my device working based on the dynamically loaded version of the device driver? Thanks a lot in adavance, shubha To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:31: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id 16BC837B419 for ; Fri, 3 May 2002 20:31:00 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id CE7EAA804; Sat, 4 May 2002 13:30:58 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id CB1BA542D; Sat, 4 May 2002 13:30:58 +1000 (EST) Date: Sat, 4 May 2002 13:30:58 +1000 (EST) From: Andrew To: shubhamr Cc: freebsd-questions@freebsd.org Subject: Re: URGENT - to remove a driver - what to do? In-Reply-To: <3CD35537.27B7D02@malkauns.nsc.com> Message-ID: <20020504132858.S44196-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, shubhamr wrote: > Can any one tell me how to remove this driver from the kernel so that,I Follow the instructions in the handbook re recbuilding your kernel. You could also just diable the device by booting with boot -c or editing /boot/kernel.conf. Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:31:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from yahoo.com (cache-ras.rain.fr [194.51.3.60]) by hub.freebsd.org (Postfix) with SMTP id 970EF37B41F; Fri, 3 May 2002 20:31:29 -0700 (PDT) Received: from unknown (153.113.244.205) by mailout2-eri1.midmouth.com with QMQP; 04 May 2002 16:33:33 +0200 Received: from unknown (HELO web.mail.halfeye.com) (142.122.51.131) by pet.vosni.net with esmtp; 04 May 2002 18:25:14 +0200 Received: from unknown (HELO smtp-server.tampabayr.com) (52.141.213.48) by sparc.zubilam.net with smtp; 04 May 2002 20:16:55 +0700 Reply-To: Message-ID: <020b48e47a7a$5847c8c4$7ad35da2@qprmvx> From: To: Cc: , , , , , , , , , , Subject: Join the Home Based Business Revolution! Date: Sat, 04 May 2002 20:13:18 +0700 MiME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_00E3_58B14A1D.A3875E10" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ------=_NextPart_000_00E3_58B14A1D.A3875E10 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: base64 SGVsbG8hDQoNCkRvIHlvdSBzZWxsIG9uIEViYXk/IElmIHNvLCB5b3UgY291 bGQgYmUgbWFraW5nIHVwIHRvICQxMDAsMDAwIA0KcGVyIG1vbnRoPyBUaGlz IGlzIG5vIGh5cGUgYW5kIG5vIHNjYW0uIFJlY2lldmluZyBvdmVyIDEuNSBi aWxsaW9uIA0KcGFnZSB2aWV3cyBwZXIgbW9udGgsIEViYXkgaXMgdGhlIFVM VElNQVRFIHZlbnVlIGZvciBzZWxsaW5nIA0KdmlydHVhbGx5IGFueXRoaW5n IGFuZCBtYWtpbmcgaHVnZSBwcm9maXRzIHdpdGggYWxtb3N0IG5vIGVmZm9y dC4gDQpCdXQgeW91IGhhdmUgdG8ga25vdyB3aGF0IHRvIHNlbGwgYW5kIGhv dyB0byBzZWxsLiBUaGF0J3Mgd2hlcmUgSSANCmNvbWUgaW4uDQoNCkFzIGEg bGVhZGluZyBleHBlcnQgaW4gaW50ZXJuZXQgbWFya2V0aW5nIGFuZCB0aGUg b3duZXIgb2Ygc2V2ZXJhbCANCnByb2ZpdGFibGUgYXVjdGlvbi1iYXNlZCBi dXNpbmVzc2VzLCB0aGUgbWFudWFsIHRoYXQgSSBoYXZlIHdyaXR0ZW4gDQpw cm92aWRlcyBlYXN5IHRvIHVuZGVyc3RhbmQgYW5kIGRldGFpbGVkIGluc3Ry dWN0aW9ucyBmb3IgbWF4aW1pemluZyANCnlvdXIgcHJvZml0cyB3aXRoIHNl bGxpbmcgc3RyYXRlZ2llcyB0aGF0IGFyZSBQUk9WRU4gV0lOTkVSUy4NCg0K SWYgeW91J3ZlIHJlYWQgYW55IG90aGVyIGJvb2tzIG9uIEViYXksIHlvdSBr bm93IHRoYXQgYWxsIG9mIHRoZW0gDQphcmUgZGVzaWduZWQgZm9yIHRoZSBj b21wdXRlciBpZGlvdCBhbmQgdGhlIGF1Y3Rpb24gbm92aWNlLiBUaGV5IA0K dGVsbCB5b3UgaG93IHRvIHJlZ2lzdGVyLCBob3cgdG8gbGlzdCBhbiBpdGVt LCBob3cgdG8gYXZvaWQgZnJhdWQsIA0KZXRjLiBUaGlzIGlzIG5vdCB0aGUg aW5mb3JtYXRpb24geW91IG5lZWQgdG8gbWFrZSBtaWxsaW9ucyBvbiBFYmF5 LiANCllvdSBuZWVkIHRvIGxlYXJuIGVmZmVjdGl2ZSBTRUxMSU5HIFNUUkFU RUdJRVMgbm90IHJlYWQgYSANCnBob3RvY29weSBvZiBFYmF5IGhlbHAgZmls ZXMhIE15IG1hbnVhbCBhc3N1bWVzIHRoYXQgeW91IGFscmVhZHkgDQprbm93 IHlvdXIgd2F5IGFyb3VuZCBFYmF5OyB5b3UgZG9uJ3QgbmVlZCBhbnkgc3Bl Y2lhbGl6ZWQgDQpjb21wdXRlciBrbm93bGVkZ2UsIGJ1dCB5b3Ugc2hvdWxk IGJlIGZhbWlsaWFyIHdpdGggYnV5aW5nIGFuZCANCnNlbGxpbmcgb24gZWJh eSBhdWN0aW9ucy4gSSdtIG5vdCBnb2luZyB0byB3YXN0ZSB5b3VyIHRpbWUg dGVhY2hpbmcgDQp5b3UgaG93IHRvIHJlZ2lzdGVyIC0gSSdtIGdvaW5nIHRv IHBhc3Mgb24gdGhlIFNFQ1JFVCBTRUxMSU5HIA0KVEVDSE5JUVVFUyB0aGF0 IEkgdXNlIGVhY2ggYW5kIGV2ZXJ5IGRheSB0byBicmluZyBpbiBodW5kcmVk cyANCm9mIHRob3VzYW5kcyBvZiBkb2xsYXJzIHNlbGxpbmcgbXkgcHJvZHVj dHMgb24gaW50ZXJuZXQgYXVjdGlvbnMuIA0KVGhlIG1hbnVhbCBjb21lcyBh cyBhIGNvbXBsZXRlIGNvdXJzZSB3aXRoIHRoZSBmb2xsb3dpbmcgbGVzc29u czoNCg0KTWFrZSBhIEZvcnR1bmUgb24gZUJheZkgDQpNYWtlIGEgRm9ydHVu ZSBvbiBlQmF5mSBpcyBmaWxsZWQgd2l0aCBwYWdlIGFmdGVyIHBhZ2Ugb2Yg dml0YWwgZUJheZkgDQptYXJrZXRpbmcgaW5mb3JtYXRpb24uIFRoaXMgdmFs dWFibGUgZUJvb2sgaXMgdGVycmlmaWMgZm9yIHRoZSBlQmF5mSB1c2VyDQp0 byBnZXQgdGhlIHJpZ2h0IGVCYXmZIGluZm9ybWF0aW9uIGFuZCBoYXZlIGFu IGluc3RhbnQgZWRnZSBvdmVyIG90aGVyDQptb3JlIGV4cGVyaWVuY2VkIGVC YXmZIFNlbGxlcnMNCg0KQWR2YW5jZWQgU2VsbGluZyBvbiBlQmF5mSAgDQpB ZHZhbmNlZCBTZWxsaW5nIG9uIGVCYXmZIGhhcyBtb3JlIHZpdGFsIGluZm9y bWF0aW9uIHRvIG1ha2UgdGhlaXIgDQphdWN0aW9uIGEgc3VjY2Vzcy4gVGhp cyBlQm9vayBoYXMgbWFueSB0b3BpY3MgdG8gZW5zdXJlIHRoYXQgdGhleSBn ZXQgDQp0aGUgbWF4aW11bSBwb3RlbnRpYWwgZnJvbSB0aGVpciBhdWN0aW9u cy4gQWR2YW5jZWQgU2VsbGluZyBvbiBlQmF5mSANCmdvZXMgaW50byBtb3Jl IGRldGFpbGVkIGluZm9ybWF0aW9uIHRoYW4gaXQncyBzaXN0ZXIgZUJvb2sg TWFrZSBhIEZvcnR1bmUgDQpvbiBlQmF5mS4NCg0KMTYgZUJheZkgRm9ybXMg DQoiMTYgZUJheZkgRm9ybXMiIGlzIGEgbXVzdC4gVGhlc2UgZm9ybXMgd2ls bCBoZWxwIHRoZW0gdHJhY2ssIGFuYWx5emUgDQphbmQgcmVjb3JkIHRoZWly IGF1Y3Rpb25zLiBJdCBjb250YWlucyAxNiBmb3JtcyB3aXRoIGZ1bGwgaW5z dHJ1Y3Rpb25zLiBUaGlzIA0KRS1Cb29rIGFsc28gY29udGFpbnMgdGhlIGZv cm1zIGluIHByaW50ZXIgZnJpZW5kbHkgdmVyc2lvbiwgc28gdGhleSBjYW4g DQpwcmludCB0aGVtIGZvciBpbW1lZGlhdGUgdXNlLiANCg0KV2hvbGVzYWxl IFNvdXJjZXMNCldob2xlc2FsZSBTb3VyY2VzIGlzIHRoZSBmaW5hbCBlQm9v ayBpbiB0aGUgZUJheZkgTWFya2V0aW5nIGVDb3Vyc2UuIEl0IA0KY29udGFp bnMgd2hvbGVzYWxlIGRpc3RyaWJ1dG9ycyBmcm9tIHRoZSBVbml0ZWQgU3Rh dGVzLCBNZXhpY28sIEhvbmcgS29uZywgDQpUYWl3YW4sIEFzaWEgYW5kIHRo ZSBQaGlsaXBwaW5lcy4gIEFybWVkIHdpdGggdGhpcyBlQm9vayB5b3VyIGN1 c3RvbWVycyANCndpbGwgaGF2ZSBvdmVyIDEwLDAwMCwwMDAgd2hvbGVzYWxl IHByb2R1Y3RzIGF0IHRoZWlyIGZpbmdlciB0aXBzLi4NCg0KVGhpcyBtYW51 YWwgaXMgZGVzaWduZWQgZm9yIGluZGl2aWR1YWxzIGxvb2tpbmcgdG8gZm9y bSBhbiBvbmxpbmUgYnVzaW5lc3MgDQpmb3IgZXh0cmEgaW5jb21lIG9yIGFz IGEgZnVsbC10aW1lIGpvYiBtYWtpbmcgaHVuZHJlZHMgb2YgdGhvdXNhbmRz IG9mIA0KZG9sbGFycyBvbiBFYmF5LiBDb250YWluZWQgaW4gdGhlIG1hbnVh bCBhcmUgV0lOTklORyBTVFJBVEVHSUVTIGZvciANCnNlbGxpbmcgb24gRWJh eSBhdWN0aW9ucy4gVGhlIG1hbnVhbCBpcyBub3QgZGVzaWduZWQgZm9yIEVi YXkgbm92aWNlcyBhbmQgDQpkb2VzIG5vdCB0ZWFjaCB0aGUgImJhc2ljcyIg c3VjaCBhcyByZWdpc3RlcmluZywgcHV0dGluZyBhbiBpdGVtIG9ubGluZSwg YnV5aW5nIA0KYW4gaXRlbSwgZXRjLiBUaGlzIG1hbnVhbCBpcyBkZXNpZ25l ZCB0byBtYWtlIEViYXkgdXNlcnMgaW50byBzdWNjZXNzZnVsIGFuZCANCndl YWx0aHkgZW50cmVwcmVuZXVycyENCg0KTm90IG9ubHkgd2lsbCB5b3UgYmUg YWJsZSB0byBtYWtlIFRIT1VTQU5EUyB3aXRoIHRoZSBpbmZvcm1hdGlvbiBp biB0aGVzZSANCmVCb29rcywgeW91IHdpbGwgYWxzbyByZWNlaXZlIEZVTEwg UmVzZWxsZXJzIHJpZ2h0cy4gVGhpcyBpcyBub3QgYW4gYWZmaWxpYXRlIA0K cHJvZ3JhbSB3aGVyZSB5b3UgZ2V0IDIwIG9yIDMwJS4uLiB5b3Uga2VlcCBh bGwgdGhlIG1vbmV5IGdlbmVyYXRlZCBmcm9tIHlvdXIgDQplQ291cnNlIHNh bGVzLg0KDQpZb3UgY2FuIHNlbGwgdGhpcyBlQ291cnNlIGFzIG1hbnkgdGlt ZXMgYXMgeW91IHdhbnQgZm9yIHdoYXRldmVyIHByaWNlIHlvdSANCmNob29z ZS4gVGhlcmUgaXMgTk8gTElNSVQgb24gaG93IG11Y2ggeW91IGNhbiBtYWtl IGZyb20gdGhpcyBpbmNyZWRpYmxlIHByb2R1Y3QhDQoNClRvIG9yZGVyIHRo ZSBlQ291cnNlIGNsaWNrIG9uIHRoZSBsaW5rIGJlbG93DQoNCmh0dHA6Ly93 d3cucG9sd2FzLmNvbS8wMDI1L2ViYXkxLmh0bQ0KQU9MIFVzZXJzIGNsaWNr IGhlcmU6IDxhIGhyZWY9Imh0dHA6Ly93d3cucG9sd2FzLmNvbS8wMDI1L2Vi YXkxLmh0bSI+DQoNClRoYW5rIHlvdSBmb3IgeW91ciB0aW1lIGFuZCBJIGhv cGUgdG8gaGVhciBmcm9tIHlvdSBzb29uIQ0KDQpKYW1lcyBNaWx0b24NClBy ZXNpZGVudCBvZiBQaG9lbml4IE1hcmtldGluZw0KDQoNCg0KDQoNCg0KDQoq KiogVGhhbmsgeW91IGZvciBiZWluZyBhIHBhcnQgb2YgYW5vdGhlciBncmVh dCBvZmZlciBmcm9tIFBob2VuaXggTWFya2V0aW5nLiBJZiB5b3UgZmVlbCB5 b3UgZG9uJ3QgYmVsb25nIG9uIG91ciBvcHQtaW4gbGlzdCBvciB3b3VsZCBs aWtlIHRvIHJlbW92ZSB5b3Vyc2VsZiBwbGVhc2Ugc2VuZCBhbiBlbWFpbCB0 bzogYWZmaWxpYXRlMUBidGFtYWlsLm5ldC5jbiBhbmQgbWFrZSBzdXJlIHRv IGhhdmUgIlJFTU9WRSIgaW4gdGhlIHN1YmplY3QgbGluZS4gVGhhbmsgeW91 Lg0KDQo3NjgySFFqVjEtOTQwQU9sMTQ= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:33:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.eagle.ca (mail2.eagle.ca [209.167.16.30]) by hub.freebsd.org (Postfix) with ESMTP id BC7F437B417 for ; Fri, 3 May 2002 20:33:30 -0700 (PDT) Received: from afi (38.eagle.speede.com [64.39.177.38]) by mail2.eagle.ca (8.11.3/8.11.3) with SMTP id g443Q8k97029 for ; Fri, 3 May 2002 23:26:08 -0400 (EDT) (envelope-from lists@brenius.com) Message-ID: <020501c1f31c$724d0a90$0200a8c0@afi> From: To: Subject: Mylex RAID to Asus Symbios SCSI Card Date: Fri, 3 May 2002 23:33:24 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I am new to this situation, so please bare with me. :D Scenario: FreeBSD 4.3R Mylex SCSI/RAID controller w/ x2 Seagate ST318436LW's in RAID1 Controller is removed and is no longer available. Replacement is an Asus Symbios SCSI card which appears to be run at SCSI-3 (40MB/s). Server was shutdown properly, original Mylex card was removed and Asus card was inserted. So I knew the OS would yell at me for a totally different HD controller and will obviously not boot up fully, and is currently stuck at: Mounting root from ufs: /dev/mlxd0s1a No such device 'mlxd' Setrootbyname failed ffs_mountroot: can't find rootup Root mount failed: 6 Mountroot> Now, the pause key is not working on the keyboard, but it appears as though the SCSI card is seeing the drives OK and seems to be named as sym0. But, of course is stuck at what I typed above. So besides what few keystrokes (which I am baffed on, cause I don`t know this part of the OS) at this prompt, any other things I would need to do for the OS to boot up properly and run as if the Mylex card was back in, minus the RAID? :D Thank you for your help in advance. :D Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 20:53:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icc.cgu.chel.su (gw.csu.ru [195.54.14.5]) by hub.freebsd.org (Postfix) with ESMTP id 38BC337B405 for ; Fri, 3 May 2002 20:53:14 -0700 (PDT) Received: from mail.cgu.chel.su (mail.cgu.chel.su [195.54.14.68]) by icc.cgu.chel.su (8.11.6/8.11.6) with ESMTP id g443r9d67677 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO) for ; Sat, 4 May 2002 09:53:11 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from mail.cgu.chel.su (localhost [127.0.0.1]) by mail.cgu.chel.su (8.12.3/8.11.2) with ESMTP id g443r9vr065068 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO) for ; Sat, 4 May 2002 09:53:09 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: (from uucp@localhost) by mail.cgu.chel.su (8.12.3/8.12.3/Submit) with UUCP id g443r9O9065067 for questions@FreeBSD.ORG; Sat, 4 May 2002 09:53:09 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from localhost (localhost.cgu.chel.su [127.0.0.1]) by jane.poka.net (8.12.3/8.11.1) with ESMTP id g443qP8o000332 for ; Sat, 4 May 2002 09:52:25 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Date: Sat, 4 May 2002 09:52:25 +0600 (YEKST) From: Ilia Chipitsine X-Sender: ilia@jane.poka.net To: questions@FreeBSD.ORG Subject: exporting /home via SMB Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG anybody tried that ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 21: 4: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gyros.marcuscom.com (rdu57-17-158.nc.rr.com [66.57.17.158]) by hub.freebsd.org (Postfix) with ESMTP id 77AA637B41D for ; Fri, 3 May 2002 21:04:03 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by gyros.marcuscom.com (8.12.3/8.12.3) with ESMTP id g4443rnh000366; Sat, 4 May 2002 00:03:53 -0400 (EDT) (envelope-from marcus@marcuscom.com) Subject: Re: can't compile gnomecore From: Joe Marcus Clarke To: "David S. Jackson" Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <20020504010614.GB12237@scee.dsj.net> References: <20020503155646.GA12354@scee.dsj.net> <1020441722.784.12.camel@gyros.marcuscom.com> <20020504010614.GB12237@scee.dsj.net> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 04 May 2002 00:03:53 -0400 Message-Id: <1020485033.279.3.camel@gyros.marcuscom.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 2002-05-03 at 21:06, David S. Jackson wrote: > On Fri, May 03, 2002 at 12:02:01PM -0400 Joe Marcus Clarke wrote: > > On Fri, 2002-05-03 at 12:56, David S. Jackson wrote: > > > Hi, > > > > > > I cvsupped everything recently (rebuilt, reinstalled) and I'm upgrading > > > gnome accordingly. However, in trying to compile gnomecore, I get the > > > following: > > > > You need to update all your GNOME dependencies first. Looks like gtk > > might be out of date or perhaps damaged. You might try a forced update > > of gtk12, and make clean, then rebuild gnomecore. See if things > > improve. > > I did a make clean in gtk12 and rebuilt from scratch. No errors. > > Did a make clean on gnomecore, tried to remake, same problem. Problem > is in > > In file included from gnome-vfs-mime-private.h:26, > from gnome-vfs-application-registry.c:32: > ../libgnomevfs/gnome-vfs-mime-monitor.h:28: > gtk/gtkobject.h: No such file or directory > In file included from gnome-vfs-mime-private.h:26, > from gnome-vfs-application-registry.c:32: > ../libgnomevfs/gnome-vfs-mime-monitor.h:31: > syntax error before `GtkObject' > gmake[3]: *** > [gnome-vfs-application-registry.lo] > Error 1 > gmake[3]: Leaving directory > `/usr/ports/devel/gnomevfs/work/gnome-vfs-1.0.5/libgnomevfs' > > > Looks like a syntax error: gtkobject.h exists and is aparently up to > date. Yeah, however, /usr/X11R6/include/gtk12 is not appearing in the include path. > > So, what do you mean by a "forced update"? Portupgrade gtk12 or > gnomecore? portupgrade -f gtk12 portupgrade -f gnomevfs Then try to build gnomecore again. Joe > > -- > David S. Jackson dsj@dsj.net > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > If God had wanted us to be concerned for the plight > of the toads, he would have made them cute and furry. > -- Dave Barry > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 21: 7:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id 9775F37B417 for ; Fri, 3 May 2002 21:07:29 -0700 (PDT) Received: from barbish ([63.70.155.70]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com for ; Sat, 4 May 2002 00:07:27 -0400 From: "Joe & Fhe Barbish" To: "FBSDQ" Subject: RE: Ping of death? Date: Sat, 4 May 2002 00:07:26 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20020504025925.GB5805@icarus.slightlystrange.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I believe this is a bug in 4.4 that gets fixed in 4.5. In the last 2-3 weeks this was discussed on the questions list. Check the archives for details. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Daniel Bye Sent: Friday, May 03, 2002 10:59 PM To: freebsd-questions@FreeBSD.ORG Subject: Re: Ping of death? On Fri, May 03, 2002 at 05:58:20PM -0500, Steven Lake wrote: > I've got one box that's got absolutely horrible access speed to > the net but it's on a T1 line and no other machine is sharing the line. > Telco has tested the line and sees nothing wrong but were unable to do a > bandwidth or data test to see if it's just traffic or not. > > The line should be pushing the full 1.544mbps, but I'm barely able > to scrape 30k out of it. Any machine that connects to it goes through the > roof on the processor useage and dogs out. So I'm suspect of a possible > ping of death, but I wanted to rule out the local equipment first. But > since anything connecting to it to test this is gagged it's impossible to > do any tests. > > Does anyone have a way to monitor incoming traffic to find out if > you're being hit with a dos attack or should I ring telco again and have > them do a test on the T1 line to find the source? Check out iplog in /usr/ports/net. tcpdump *may* be useful too. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 21:24:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 417B437B416 for ; Fri, 3 May 2002 21:24:45 -0700 (PDT) Received: from tim.dynofrog.com (dhcp065-031-025-171.insight.rr.com [65.31.25.171]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id g444OYP00787; Sat, 4 May 2002 00:24:34 -0400 (EDT) Subject: Re: exporting /home via SMB From: Tim Boring To: Ilia Chipitsine Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.1 Date: 04 May 2002 01:26:08 -0300 Message-Id: <1020486374.12764.5.camel@tim.dynofrog.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > anybody tried that ? What would be the point of that? You can set up the Samba config file to use a share that will export the home directory of each user. If I remember correctly, it's the [homes] share, or something close to that. But there is no need to export the /home directory itself. For more info on the Samba config file, check out www.samba.org. Tim > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 21:50: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.monochrome.org (b4.ebbed1.client.atlantech.net [209.190.235.180]) by hub.freebsd.org (Postfix) with ESMTP id ECFE437B417 for ; Fri, 3 May 2002 21:50:00 -0700 (PDT) Received: from localhost (faro [192.168.1.7]) by mail.monochrome.org (8.9.3/8.9.3) with SMTP id AAA19690; Sat, 4 May 2002 00:49:59 -0400 (EDT) (envelope-from chris@monochrome.org) Date: Sat, 4 May 2002 00:49:58 -0400 (EDT) From: Chris Hill X-Sender: chris@localhost To: Marco Beishuizen Cc: FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver In-Reply-To: <20020504010626.B299-100000@yokozuna.bsd> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, Marco Beishuizen wrote: > [...] I installed a JetDirect 600N on my HP laserjet 2100, and I'm > using apsfilter to install the printer. > > Well, my question is how to print... Apsfilter needs to know about the > IP adress and hostname of the printer. How do I know what the hostname > and the IP adress of the JetDirect are? Don't know anything about apsfilter, but I have two printers with JetDirect interfaces. In both cases, you can set the IP address from the printer's front panel. Look for a menu that says something about "MIO configure", and then "IP address" under that. Once you've set that, you can telnet to the printer and set up the rest. The newer HP printers have an embedded web server, and you can just point a browser to the printer's IP and configure away using their GUI. The hostname is whatever you say it is - put an entry in /etc/hosts to match the IP address you set on the printer. HTH. -- Chris Hill chris@monochrome.org ** [ Busy Expunging <|> ] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 22: 0:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icc.cgu.chel.su (gw.csu.ru [195.54.14.5]) by hub.freebsd.org (Postfix) with ESMTP id B81CE37B41C for ; Fri, 3 May 2002 22:00:18 -0700 (PDT) Received: from mail.cgu.chel.su (mail.cgu.chel.su [195.54.14.68]) by icc.cgu.chel.su (8.11.6/8.11.6) with ESMTP id g4450Ad69732 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sat, 4 May 2002 11:00:10 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from mail.cgu.chel.su (localhost [127.0.0.1]) by mail.cgu.chel.su (8.12.3/8.11.2) with ESMTP id g44509vr065608 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sat, 4 May 2002 11:00:10 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: (from uucp@localhost) by mail.cgu.chel.su (8.12.3/8.12.3/Submit) with UUCP id g44509lf065607; Sat, 4 May 2002 11:00:09 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from localhost (localhost.cgu.chel.su [127.0.0.1]) by jane.poka.net (8.12.3/8.11.1) with ESMTP id g444xqcA000339; Sat, 4 May 2002 10:59:52 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Date: Sat, 4 May 2002 10:59:52 +0600 (YEKST) From: Ilia Chipitsine X-Sender: ilia@jane.poka.net To: Tim Boring Cc: questions@FreeBSD.ORG Subject: Re: exporting /home via SMB In-Reply-To: <1020486374.12764.5.camel@tim.dynofrog.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > anybody tried that ? > > What would be the point of that? You can set up the Samba config file the point of that would be setting a server which imports user database using NIS+Kerberos, and home directories would be imported using SMB. > to use a share that will export the home directory of each user. If I > remember correctly, it's the [homes] share, or something close to that. > But there is no need to export the /home directory itself. > > For more info on the Samba config file, check out www.samba.org. > > Tim > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 22:41:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mz.ru (aserver.oo.ru [194.135.19.10]) by hub.freebsd.org (Postfix) with SMTP id 0A57A37B41B for ; Fri, 3 May 2002 22:41:18 -0700 (PDT) From: "Markets.Ru admin" To: members@markets.ru Reply-To: 120n3@mz.ru Subject: üËÓËÌÀÚÉ×ÎÙÅ ÐÒÅÄÌÏÖÅÎÉÑ ÔÏÌØËÏ ÄÌÑ ÷ÁÓ! Message-Id: <20020504054118.0A57A37B41B@hub.freebsd.org> Date: Fri, 3 May 2002 22:41:18 -0700 (PDT) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -------------------------------------------------------------------------------- õ×ÁÖÁÅÍÙÅ ÐÏÌØÚÏ×ÁÔÅÌÉ ÄÏÓÏË ÏÂØÑ×ÌÅÎÉÊ, ÞÁÔÏ×, ÉÎÆÏÒÍÁÃÉÏÎÎÙÈ ÌÅÎÔ, ÇÏÓÔÅ×ÙÈ ËÎÉÇ, ×ÉÒÔÕÁÌØÎÙÈ ÏÔËÒÙÔÏË ÓÅÒ×ÅÒÏ× Zerkalo.Com, One.Ru, Referatov.Net, 55.ru, Sunday.Ru, Cards.Ru, Gb.Ru, Mtr.Ru, Presents.Ru, Az.Ru É ÒÏÄÓÔ×ÅÎÎÙÈ ÓÅÒ×ÅÒÏ×. ïÔ ×ÓÅÊ ÄÕÛÉ ÐÏÚÄÒÁ×ÌÑÅÍ ÷ÁÓ Ó ÐÒÁÚÄÎÉËÁÍÉ. äÁÎÎÏÅ ÉÎÆÏÒÍÁÃÉÏÎÎÏÅ ÐÉÓØÍÏ ÒÁÚÏÓÌÁÎÏ ×ÁÍ ÄÌÑ Õ×ÅÄÏÍÌÅÎÉÑ Ï ÔÏÍ, ÞÔÏ ÄÏ 30 ÍÁÑ 2002 ÇÏÄÁ ÍÙ ÐÒÏ×ÏÄÉÍ ÐÒÏÍÏ-ÁËÃÉÀ ÎÏ×ÙÈ ÓÅÒ×ÉÓÏ× × ÏÂÌÁÓÔÉ ÈÏÓÔÉÎÇÁ É ÒÅÇÉÓÔÒÁÃÉÉ ÄÏÍÅÎÏ×, Á ÔÁËÖÅ ÒÅËÌÁÍÙ, ÐÒÏÇÒÁÍÍÉÒÏ×ÁÎÉÑ É ÄÉÚÁÊÎÁ × éÎÔÅÒÎÅÔ. îÅÄÁ×ÎÏ ÍÙ ÄÏÂÁ×ÉÌÉ ÎÅÓËÏÌØËÏ ÎÏ×ÙÈ ÍÏÝÎÙÈ ÓÅÒ×ÅÒÏ× É ÏÔËÒÙÌÉ ÎÏ×ÙÅ ÔÁÒÉÆÎÙÅ ÐÌÁÎÙ É ÓÐÅÃÉÁÌØÎÙÅ ÓÅÒ×ÉÓÙ. åÓÌÉ ×ÁÓ ÎÅ ÚÁÉÎÔÅÒÅÓÕÀÔ ÜÔÉ ÐÒÅÄÌÏÖÅÎÉÑ, ÔÏ ÐÒÏÓÉÍ ×ÁÓ ÌÀÂÅÚÎÏ ÐÅÒÅÓÌÁÔØ ÜÔÏ ÐÉÓØÍÏ ×ÁÛÉÍ ÄÒÕÚØÑÍ É ÚÎÁËÏÍÙÍ - ×ÌÁÄÅÌØÃÁÍ ÓÁÊÔÏ× É ÄÏÍÅÎÏ×, ×ÏÚÍÏÖÎÏ ÜÔÉ ÕÓÌÕÇÉ ÐÏËÁÖÕÔÓÑ ÉÎÔÅÒÅÓÎÙÍÉ ÉÍ, É ÏÎÉ ÎÁ×ÅÒÎÑËÁ ÂÕÄÕÔ ×ÁÍ ÂÌÁÇÏÄÁÒÎÙ × ÂÕÄÕÝÅÍ. 1. ðÒÉÇÌÁÛÁÅÍ ×ÏÓÐÏÌØÚÏ×ÁÔØÓÑ ÕÓÌÕÇÁÍÉ ÎÁÛÅÊ ÈÏÓÔÉÎÇÏ×ÏÊ ËÏÍÐÁÎÉÉ USERS.Ru - http://www.users.ru , ( ÚÅÒËÁÌÏ - http://www.companies.ru ) ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ×ÁÛÉÈ ÓÁÊÔÏ× É ÓÅÒ×ÅÒÏ×; - Õ ÎÁÓ ÌÕÞÛÁÑ × òÏÓÓÉÉ ÓËÏÒÏÓÔØ (10 Gb/sec), ÎÅÏÇÒÁÎÉÞÅÎÎÙÊ ÔÒÁÆÆÉË, ×ÓÅ ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÓÅÒ×ÉÓÙ, ÂÏÌØÛÏÅ ÄÉÓËÏ×ÏÅ ÐÒÏÓÔÒÁÎÓÔ×Ï (ÄÏ 3 ÇÉÇÁÂÁÊÔ É ÂÏÌÅÅ), ÎÅÚÁÇÒÕÖÅÎÎÙÅ ÓÅÒ×ÅÒÁ, ËÒÕÇÌÏÓÕÔÏÞÎÁÑ ÐÏÄÄÅÒÖËÁ. ôÅÐÅÒØ, ÐÒÉ ÚÁËÁÚÅ ÈÏÓÔÉÎÇÁ ÎÁ ÐÏÌÇÏÄÁ ÉÌÉ ÂÏÌÅÅ ×Ù ÐÏÌÕÞÁÅÔÅ ÓËÉÄËÉ ÄÏ 25% + Ä×ÏÊÎÏÅ ÍÅÓÔÏ + ÄÏÍÅÎ ÂÅÓÐÌÁÔÎÏ (ÐÏÞÔÉ ×Ï ×ÓÅÈ ÔÁÒÉÆÎÙÈ ÐÌÁÎÁÈ)! îÅÄÁ×ÎÏ ÍÙ ××ÅÌÉ ÐÏÄÁÒÏÞÎÙÅ ÐÌÁÎÙ ÈÏÓÔÉÎÇÁ (http://www.users.ru/vhosting.html), ÎÁÐÒÉÍÅÒ - ÐÏÄÁÒÏÞÎÙÊ ÐÌÁÎ "äÅÎØ òÏÖÄÅÎÉÑ" 150 ÍÅÇÁÂÁÊÔ ÄÉÓËÏ×ÏÇÏ ÐÒÏÓÔÒÁÎÓÔ×Á, ×ÓÅ ÓÅÒ×ÉÓÙ, ÎÁ ÌÕÞÛÅÍ ËÁÎÁÌÅ × òÏÓÓÉÉ ×ÓÅÇÏ ÚÁ $62 × ÇÏÄ + ÄÏÍÅÎ *.com × ÐÏÄÁÒÏË! éÌÉ ÔÁÒÉÆÎÙÊ ÐÌÁÎ "ä×ÏÊÎÏÊ" Ä×Á ÈÏÓÔÉÎÇÁ 2X300 Mb É 2 ÄÏÍÅÎÁ × ÐÏÄÁÒÏË, ×ÓÅÇÏ ÚÁ $145 ÄÏÌÌÁÒÏ× × ÇÏÄ! ðÏÄÁÒÉÔÅ Ó×ÏÉÍ ÓÅÂÅ É Ó×ÏÉÍ ÌÀÂÉÍÙÍ ÄÏÍÅÎ É ÈÏÓÔÉÎÇ ÎÁ ÌÕÞÛÅÍ × òÏÓÓÉÉ ËÁÎÁÌÅ É ÓÅÒ×ÅÒÁÈ! äÌÑ VIP-ËÌÉÅÎÔÏ× ÍÙ ÒÁÚÒÁÂÏÔÁÌÉ ÓÐÅÃÉÁÌØÎÙÅ ÐÌÁÎÙ (http://www.users.ru/vihosting.html) ðÏ ÍÎÏÇÏÞÉÓÌÅÎÎÙÍ ÐÒÏÓØÂÁÍ ××ÅÄÅÎÙ É ÏÔÄÅÌØÎÙÅ ÐÌÁÎÙ ÄÌÑ ÒÁÚ×ÌÅËÁÔÅÌØÎÙÈ ÍÅÇÁÐÏÒÔÁÌÏ× (http://www.users.ru/erhosting.html) ôÁËÖÅ ÐÒÅÄÌÁÇÁÅÍ ÏÔÌÉÞÎÙÅ ÅÖÅÍÅÓÑÞÎÙÅ (http://www.users.ru/hosting.html) É ÇÏÄÏ×ÙÅ ÐÌÁÎÙ ÐÏÌÎÏÆÕÎËÃÉÏÎÁÌØÎÏÇÏ ÈÏÓÔÉÎÇÁ ×ÓÅÇÏ ÏÔ 4$/ÍÅÓÑà ÉÌÉ ÏÔ 39$/ÇÏÄ (!) - (http://www.users.ru/yhosting.html) ðÅÒÅÎÏÓ ÄÏÍÅÎÁ ÏÔ ÄÒÕÇÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ ÂÅÓÐÌÁÔÎÏ É ÂÅÚ ÐÅÒÅÒÙ×Á × ÒÁÂÏÔÅ ÓÁÊÔÁ. òÅÇÉÓÔÒÁÃÉÑ ÄÏÍÅÎÏ× × ÚÏÎÁÈ *.com, *.net, *.org Õ ÎÁÓ ×ÓÅÇÏ $11 × ÇÏÄ, *.info, *.biz - $15/ÇÏÄ, × ÚÏÎÅ *.ru - $24. ðÅÒÅÎÏÓ ÄÏÍÅÎÁ ÏÔ ÄÒÕÇÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ ÂÙÓÔÒÏ, ÂÅÓÐÌÁÔÎÏ É ÂÅÚÂÏÌÅÚÎÅÎÎÏ ÄÌÑ ÓÁÊÔÁ. îÉËÁËÉÈ ÓËÒÙÔÙÈ ÏÐÌÁÔ. äÏÐÏÌÎÉÔÅÌØÎÙÅ ÓËÉÄËÉ ÄÌÑ ÄÉÌÅÒÏ× É ÅÓÌÉ ÷Ù ÒÁÚÍÅÝÁÅÔÅ ÎÅÓËÏÌØËÏ ÓÁÊÔÏ×. õ ÎÁÓ ÄÅÊÓÔ×ÉÔÅÌØÎÏ ÌÕÞÛÉÅ × òÏÓÓÉÉ ÕÓÌÏ×ÉÑ, ÃÅÎÙ É ËÁÞÅÓÔ×Ï! íÙ ÐÒÉÎÉÍÁÅÍ Ë ÏÐÌÁÔÅ (ÐÏÍÉÍÏ ÏÂÙÞÎÙÈ ÓÐÏÓÏÂÏ×) É ËÒÅÄÉÔÎÙÅ ËÁÒÔÙ VISA É MasterCard/EuroCard × ÏÐÌÁÔÕ ÚÁ ÈÏÓÔÉÎÇ, ÄÏÍÅÎÎÙÅ ÉÍÅÎÁ, ÒÅËÌÁÍÕ, ÐÒÏÇÒÁÍÍÉÒÏ×ÁÎÉÅ É ÄÒÕÇÉÅ ÕÓÌÕÇÉ. ðÏÍÉÍÏ ÜÔÏÇÏ ÐÒÉÎÉÍÁÅÔÓÑ Ë ÏÐÌÁÔÅ WebMoney. ú×ÏÎÉÔÅ (095) 4308658, 4322846, 7553376, 7553378 × ÒÁÂÏÞÅÅ ×ÒÅÍÑ æÁËÓ : (095) 4313384 E-mail: hosting@markets.ru íÙ ÂÕÄÅÍ ×ÁÍ ÎÁÄÅÖÎÙÍ É ×ÅÒÎÙÍ ÐÁÒÔÎÅÒÏÍ ! ÷ÁÛ ÓÁÊÔ ÂÕÄÅÔ ÒÁÚÍÅÝÅÎ ÎÁ ËÁÞÅÓÔ×ÅÎÎÏÍ É ÓÔÁÂÉÌØÎÏÍ ËÁÎÁÌÅ! 2. éÎÔÅÒÎÅÔ-ÁÇÅÎÔÓÔ×Ï DeLuxe (http://www.deluxe.ru), úáï Markets.Ru (http://www.markets.ru) ÓÏ×ÍÅÓÔÎÏ Ó ÐÒÏÇÒÁÍÍÎÙÍ ÂÀÒÏ ManWill ( http://www.manwill.ru ) c 5 ÁÐÒÅÌÑ 2002 ÇÏÄÁ ÐÒÏ×ÏÄÑÔ ÐÒÏÍÏ-ÁËÃÉÀ - ÓÏÚÄÁÎÉÅ ÐÏÌÎÏÆÕÎËÃÉÏÎÁÌØÎÏÇÏ ËÏÒÐÏÒÁÔÉ×ÎÏÇÏ ÓÁÊÔÁ ×ËÌÀÞÁÀÝÅÇÏ × ÓÅÂÑ ÉÎÔÅÒÎÅÔ-ÍÁÇÁÚÉÎ ( Ó ÉÎÔÅÇÒÉÒÏ×ÁÎÎÏÊ ÐÌÁÔÅÖÎÏÊ ÓÉÓÔÅÍÏÊ ÄÌÑ ÐÒÉÅÍÁ ËÒÅÄÉÔÎÙÈ ËÁÒÔ VISA É MasterCard/EuroCard) É ÓÉÓÔÅÍÕ ÏÂÎÏ×ÌÅÎÉÑ ÓÁÊÔÁ ÚÁ $1299. òÅÄÉÚÁÊÎ É ÏÂÎÏ×ÌÅÎÉÅ ÓÕÝÅÓÔ×ÕÀÝÅÇÏ ÓÁÊÔÁ Ó ÄÏÂÁ×ÌÅÎÉÅÍ ÔÏÒÇÏ×ÙÈ É ÉÎÔÅÒÁËÔÉ×ÎÙÈ ÍÏÄÕÌÅÊ ÚÁ $999. òÅËÌÁÍÎÙÅ É ÐÒÏÍÏ-ÁËÃÉÉ × éÎÔÅÒÎÅÔ ÏÔ $199 ! òÁÚÒÁÂÏÔËÁ ÍÁÇÁÚÉÎÏ× É ÁÕËÃÉÏÎÏ× - ÏÔ $349 ! ú×ÏÎÉÔÅ ÎÁÍ ÐÒÑÍÏ ÓÅÊÞÁÓ: +7(095)7202036, 5051005 3. ðÏÐÕÌÑÒÎÙÊ ÒÏÓÓÉÊÓËÉÊ ÒÅÊÔÉÎÇ Top.One.Ru ÐÒÅÄÌÁÇÁÅÔ ÒÁÚÍÅÝÅÎÉÅ ËÏÍÍÅÒÞÅÓËÉÈ ÏÐÌÁÞÉ×ÁÅÍÙÈ ÓÓÙÌÏË É ÂÁÎÎÅÒÏ× ××ÅÒÈÕ ÓÔÒÁÎÉà ÒÁÚÄÅÌÏ× ÒÅÊÔÉÎÇÁ ×ÓÅÇÏ ÏÔ $7 × ÍÅÓÑÃ. ÷ÙÄÅÌÅÎÉÅ Ã×ÅÔÏÍ É ÔÏÌÓÔÙÍ ÛÒÉÆÔÏÍ ÓÓÙÌËÉ ÏÔ $2 × ÍÅÓÑÃ. äÌÑ ÒÁÚÍÅÝÅÎÉÑ ËÏÍÍÅÒÞÅÓËÏÊ ÓÓÙÌËÉ ÉÌÉ ÂÁÎÎÅÒÁ ÷ÁÍ ÎÕÖÎÏ Ó×ÑÚÁÔØÓÑ Ó ÎÁÍÉ, ÚÁÂÒÏÎÉÒÏ×ÁÔØ ÍÅÓÔÏ É ÏÐÌÁÔÉÔØ ÒÁÚÍÅÝÅÎÉÅ ÎÁ ÉÚÂÒÁÎÎÙÊ ÓÒÏË. ÷Ù ÓÍÏÖÅÔÅ ÐÏÌÕÞÉÔØ ÞÉÓÔÕÀ ÃÅÌÅ×ÕÀ ÁÕÄÉÔÏÒÉÀ ÎÁ Ó×ÏÊ ÒÅÓÕÒÓ ÚÁ ÏÞÅÎØ ÎÅÂÏÌØÛÉÅ ÄÅÎØÇÉ. ðÏÌÎÙÅ ÒÁÓÃÅÎËÉ ÎÁ ÒÁÚÍÅÝÅÎÉÅ ËÏÍÍÅÒÞÅÓËÉÈ ÓÓÙÌÏË É ÂÁÎÎÅÒÏ× ÷Ù ÍÏÖÅÔÅ ÐÏÓÍÏÔÒÅÔØ ÚÄÅÓØ: http://top.one.ru/paylink.htm ÷Ù ÐÏÌÕÞÉÔÅ ÃÅÌÅ×ÙÈ ÐÏÓÅÔÉÔÅÌÅÊ ÚÁ ÎÅ ÏÞÅÎØ ÂÏÌØÛÉÅ ÄÅÎØÇÉ! 4. ôÏÒÇÏ×ÁÑ ÓÉÓÔÅÍÁ 55.ru (http://www.55.ru) ÐÒÅÄÌÁÇÁÅÔ ÇÏÔÏ×ÙÅ éÎÔÅÒÎÅÔ-ÍÁÇÁÚÉÎÙ ÐÏ ÃÅÎÅ ÏÔ 399$ (http://www.55.ru/ourservices.htm) ÉÌÉ ÁÒÅÎÄÕ ÍÁÇÁÚÉÎÏ× ÏÔ 15 ÄÏÌÌÁÒÏ× × ÍÅÓÑÃ! íÙ ÂÕÄÅÍ ÒÁÄÙ É ÄÁÌØÛÅ ÂÙÔØ ÐÏÌÅÚÎÙÍÉ ÷ÁÍ! -------------------------------------------------------------------------------- To unsubscribe from any mail lists please visit http://www.mz.ru and enter your e-mail. Do not forget enter all redirect e-mails too. -------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 23: 8: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 2A26137B416 for ; Fri, 3 May 2002 23:08:04 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g4467c313405; Sat, 4 May 2002 02:07:38 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g4478MGC000325; Sat, 4 May 2002 03:08:22 -0400 (EDT) (envelope-from david) Date: Sat, 4 May 2002 03:08:22 -0400 From: David Banning To: Philippe CASIDY Cc: david@skytrackercanada.com, questions@freebsd.org Subject: Re: mozilla - no text entry appears Message-ID: <20020504030822.B315@mail.clubplus.net> References: <20020503163403.A4378@mail.clubplus.net> <200205032207.g43M74jV000597@greatoak.home> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200205032207.g43M74jV000597@greatoak.home>; from pcasidy@casidy.com on Sat, May 04, 2002 at 12:07:04AM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 12:07:04AM +0200, Philippe CASIDY wrote: > On 3 May, David Banning wrote: > > I just compiled mozilla from the ports and it seems to > > operate OK other than the text does not appear in > > search boxes. The text will simply not enter. > > > I had this problem and solved it today ;) > > I simply removed my ~/.mozilla directory. I was not interested in its > contents so I did not dig to found what the problem exactly was. That would have been about the -last- thing that I tried. You were right. It worked. Many thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri May 3 23:25:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 2AC1C37B41F for ; Fri, 3 May 2002 23:25:39 -0700 (PDT) Received: from skytrackercanada.com (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g446PD313627 for ; Sat, 4 May 2002 02:25:13 -0400 Received: (from david@localhost) by skytrackercanada.com (8.12.3/8.12.3) id g447Q3v3017001 for questions@FreeBSD.ORG; Sat, 4 May 2002 03:26:03 -0400 (EDT) (envelope-from david) Date: Sat, 4 May 2002 03:26:03 -0400 From: David Banning To: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020504032603.A8812@mail.clubplus.net> References: <20020503111257.A3919@mail.clubplus.net> <20020503180233.A16817@bsag.ch> <20020503160632.A89782@mail.clubplus.net> <20020503224426.A39765@bsag.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503224426.A39765@bsag.ch>; from hanspeter_roth@hotmail.com on Fri, May 03, 2002 at 10:44:26PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > It seems you have upgrade the kernel to 4.5Stable. That's where I am too. > I don't know whether modules are impacted by the userland programs. what's a 'userland' program? > Just curious: have you also made installworld? Yes. > > Are there strange boot message near `additional ABI support:'? > (ScrollLock PgUp) No. > Does `ls /proc` look reasonable? su-2.03# ls /proc 0/ 174/ 230/ 304/ 58/ 1/ 2/ 231/ 306/ 6/ 104/ 209/ 232/ 307/ 62/ 106/ 21/ 234/ 308/ 63/ 119/ 211/ 236/ 309/ 64/ 133/ 213/ 250/ 310/ 65/ 136/ 214/ 259/ 311/ 72/ 152/ 215/ 260/ 312/ 74/ 162/ 216/ 269/ 313/ 77/ 167/ 217/ 284/ 330/ 79/ 168/ 218/ 285/ 335/ 82/ 169/ 219/ 287/ 348/ 8810/ 16990/ 224/ 288/ 39/ 8812/ 16991/ 225/ 289/ 4/ curproc@ 16996/ 226/ 290/ 4067/ 170/ 227/ 3/ 5/ 171/ 228/ 302/ 52/ 172/ 229/ 303/ 56/ No sure what reasonable is in this case. > Is /compat/linux/proc a directory? yes. > I have linux_base-6.1 port installed. Me too. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 0:21:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mx2.mail.ru (mx2.mail.ru [194.67.57.12]) by hub.freebsd.org (Postfix) with ESMTP id 422CB37B417 for ; Sat, 4 May 2002 00:21:32 -0700 (PDT) Received: from ip60.selena.kherson.ua ([193.220.96.60] helo=sansoft) by mx2.mail.ru with esmtp (Exim SMTP.2) id 173trF-0000py-00 for questions@FreeBSD.org; Sat, 04 May 2002 11:21:31 +0400 Date: Sat, 4 May 2002 10:21:06 +0400 From: Evgeny X-Mailer: The Bat! (v1.39) Educational Reply-To: Evgeny X-Priority: 3 (Normal) Message-ID: <19431.020504@mail.ru> To: questions@FreeBSD.org Subject: FreeBSD sound configuration Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello FreeBSD-masters I have AC'97 codec on SOLTEK 75KAV-X motherboard. I recompiled the kernel with device pcm in configuration file. When I run #cat /dev/sndstat it prints no errors: port ... After that next my step: #cd /dev #MAKEDEV snd0 #MAKEDEV snd1 It prints no errors too but sound does not work. When I run artsd it prints: 'Device not configured' What can I do ? Thanks, Best regards, Evgeny mailto:wmdenhome@mail.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 0:41:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from antares.surnet.ru (antares.surnet.ru [195.54.2.5]) by hub.freebsd.org (Postfix) with ESMTP id 1F63C37B41B for ; Sat, 4 May 2002 00:41:39 -0700 (PDT) Received: (from uucp@localhost) by antares.surnet.ru (8.11.6/Joy) with UUCP id g447fax57367 for questions@FreeBSD.ORG; Sat, 4 May 2002 13:41:36 +0600 (YEKST) Received: from localhost (localhost [127.0.0.1]) by sol.chel.skbkontur.ru (8.11.6/8.11.6) with ESMTP id g447eg442450 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO) for ; Sat, 4 May 2002 13:40:43 +0600 (YEKST) (envelope-from ilia@chel.skbkontur.ru) Date: Sat, 4 May 2002 13:40:41 +0600 (YEKST) From: =?koi8-r?B?6czY0SD7ydDJw8nO?= To: questions@FreeBSD.ORG Subject: NIS question Message-ID: <20020504133856.M42208-100000@sol.chel.skbkontur.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear Sirs, I want to share /etc/passwd and /etc/group via NIS. Would anybody explain me how to do that (step by step) ? No, I don't want to share master.passwd (I'm using Kerberos 5 for authorization) Regards, (=EE=C1=C9=CC=D5=DE=DB=C9=C5 =D0=CF=D6=C5=CC=C1=CE=C9=D1) Ilia Chipitsine (=E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 1: 1:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from io.axl.net (io.axl.net [216.66.11.120]) by hub.freebsd.org (Postfix) with SMTP id 76CDC37B419 for ; Sat, 4 May 2002 01:01:11 -0700 (PDT) Received: (qmail 31104 invoked from network); 4 May 2002 06:50:30 -0000 Received: from proxima.axl.net (216.66.11.18) by 0 with SMTP; 4 May 2002 06:50:30 -0000 Received: (qmail 9250 invoked by uid 65534); 4 May 2002 06:50:41 -0000 Date: 4 May 2002 06:50:41 -0000 Message-ID: <20020504065041.9249.qmail@proxima.axl.net> To: freebird_one@yahoo.com, freebirdls@yahoo.com, freebirds4@yahoo.com, freebirdw@freeuk.com, freebobg@hotmail.com, freebook@getfreehits.com, freebook@prosperity2u.com, freebooterband@hotmail.com, freeborn@ntonline.com, freebornforever@rocketmail.com, freebs@2whitehouse.freeserve.co.uk, freebsd-doc@freebsd.org, freebsd-isp-jp@nanet.co.jp, freebsd-mke-l-request@ns.sol.net, freebsd-questions@freebsd.org From: SizeDoesMatter@msn.com () Subject: GOT A SMALL OR AVERAGE PENIS? DO YOU WANT A MASSIVE PENIS! < /html>< font ptsize=1>edh459ka Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Below is the result of your feedback form. It was submitted by (SizeDoesMatter@msn.com) on Saturday, May 4, 2002 at 02:50:41 --------------------------------------------------------------------------- : *Size DOES Matter!

**Add 1-4 inches in length and width to your penis size in 2-3 weeks GAURANTEED!
***Are you embarrased at the gym?
****Or even in your own privacy of your bedroom because of the size of your penis?
****Mad that you cant please your lover in bed?
**What can you loose its GAURANTEED!
*Boost your Confidence and your love making skills enjoy your life more!

Dont be ashamed goto http://66.78.40.33/~silent/u/monster we w%6 --------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 1:50:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from corten2.billschoolcraft.com (adsl-63-193-247-201.dsl.snfc21.pacbell.net [63.193.247.201]) by hub.freebsd.org (Postfix) with ESMTP id 602DB37B41A for ; Sat, 4 May 2002 01:49:59 -0700 (PDT) Received: from corten8.billschoolcraft.com ([192.168.7.8]) by corten2.billschoolcraft.com with esmtp (Exim 3.22 #1 (Debian)) id 173nyD-0003ub-00 for ; Fri, 03 May 2002 18:04:17 -0700 Date: Fri, 3 May 2002 17:00:08 -0700 (PDT) From: Bill Schoolcraft X-Sender: bill@corten8 To: freebsd-questions@FreeBSD.ORG Subject: Re: fetchmail In-Reply-To: <20020503172229.A15598@bsag.ch> Message-ID: System-ID: [en] (I; Linux i86pc) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At Fri, 3 May 2002 it looks like Hanspeter Roth composed: > On May 03 at 10:08, Henning, Brian spoke: > > > Hello, > > > > I am trying to get fetchmail to work on my BSD box but i am having some > > problems. I get a error message of > > 'SMTP connect to localhost failed' as shown below. I am pretty sure I have > > it configured properly on the fetchmail side. Do i need to have sendmail > > installed and configured to use fetchmail? If so can you direct me to some > > Afaik fetchmail needs an MTA such as sendmail listening on port 25 > or 587. > Have you tried sendmail_enable="YES" in /etc/rc.conf? > What does `netstat -an|grep \\\*` tell? > Hmm, for general users machines I just bypass Sendmail and use procmail as my MDA with this .fetchmailrc file: (example of .fetchmailrc) ######################### set daemon 300 poll ruby.he.net with protocol POP3: user steve there with password sy67Gbe is stephan here mda "/usr/bin/procmail -f - " ######################### That's the whole file period. I just start fetchmail with: fetchmail -a and it starts. If you want to set that file up and just "check" and see if the file works, use the following command. fetchmail -c Fetchmail may complain about some perms but it'll tell you what permissions it wants in it's error. -- Bill Schoolcraft PO Box 210076 -o) San Francisco CA 94121 /\ "UNIX, A Way Of Life." _\_v http://forwardslashunix.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 3:24:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu03.email.msn.com (cpimssmtpu03.email.msn.com [207.46.181.79]) by hub.freebsd.org (Postfix) with ESMTP id 0288E37B41B for ; Sat, 4 May 2002 03:24:44 -0700 (PDT) Received: from thebe ([67.25.97.177]) by cpimssmtpu03.email.msn.com with Microsoft SMTPSVC(5.0.2195.4617); Sat, 4 May 2002 03:24:05 -0700 From: "Aaron Burke" To: "Ilia Chipitsine" Cc: "FreeBSD-Questions" Subject: RE: exporting /home via SMB Date: Sat, 4 May 2002 03:24:17 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal X-OriginalArrivalTime: 04 May 2002 10:24:06.0355 (UTC) FILETIME=[D1F81230:01C1F355] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG There are a few things about smb.conf that you should realise. There are a list of the things that Samba can fill in for you. One of which is the current user logged on. Also search for a file called smb.conf.default . I have taken this info from a book labeled Teach yourself Samba in 24 hours. %a How samba reports itself. You should not care about this though %d The Process ID of the current server process %g the primary group of username %u (notice case here, %G the primary group of username %U it kind of matters) %h is the Internet hostname of the machine which samba is running %H The home directory of for username %u %I the IP address of the client machine in dotted decimal form %p The path to the users home directory as specified in auto.home The NIS map entry is assumed to be a colon seperated list and is divided into %N:%p %P The root directory of the current service. %R The protocol selected during the protocol negotiation phase of the connection setup. Valid values are CORE, COREPLUS, LANMAN1, LANMAN2, or NT1. %S The name of the current service %T The current date and time %u The username of the current service %U The username of the client requested in the session setup. This is not neccessarily the same as the one that was used. %v Samba version number. And the important info you may be looking for is in smb.conf.default. [homes] browseable = no comment = User Home Directory create mode = 0775 public = no Or, if you care for the whole users directory, setup. [Any name you want] browseable = no ; you may want yes comment = The home dir of my system create mode = 0775 public = no ; you may want yes > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ilia Chipitsine > Sent: Friday, May 03, 2002 10:00 PM > To: Tim Boring > Cc: questions@FreeBSD.ORG > Subject: Re: exporting /home via SMB > > > > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > > anybody tried that ? > > > > What would be the point of that? You can set up the Samba config file > > the point of that would be setting a server which imports user database > using NIS+Kerberos, and home directories would be imported using > SMB. > > > to use a share that will export the home directory of each user. If I > > remember correctly, it's the [homes] share, or something close to that. > > But there is no need to export the /home directory itself. > > > > For more info on the Samba config file, check out www.samba.org. > > > > Tim > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 3:30:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.wananchi.com (ns2.wananchi.com [62.8.64.4]) by hub.freebsd.org (Postfix) with ESMTP id 4F5E637B41A for ; Sat, 4 May 2002 03:30:41 -0700 (PDT) Received: from wash by ns2.wananchi.com with local (Exim 3.36 #1 (FreeBSD)) id 173woT-000Apn-00 for ; Sat, 04 May 2002 13:30:49 +0300 Date: Sat, 4 May 2002 13:30:49 +0300 From: Odhiambo Washington To: freebsd-questions@FreeBSD.ORG Subject: Help get reverse of this command Message-ID: <20020504103049.GA30802@ns2.wananchi.com> Mail-Followup-To: Odhiambo Washington , freebsd-questions@FreeBSD.ORG Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.25i X-Disclaimer: Any views expressed in this message,where not explicitly attributed otherwise, are mine alone!. X-Fortune: The computing field is always in need of new cliches. -- Alan Perlis X-Operating-System: FreeBSD 4.5-STABLE i386 X-Best-Window-Manager: Blackbox X-Mailer: Mutt http://www.mutt.org/ X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 1:24PM up 2:26, 2 users, load averages: 0.31, 0.15, 0.17 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I can do this tar $some_args some_dirs | /usr/bin/ssh alligator '(cd /home/wash/Administration/Backups; cat > filename.tgz)' this pipes the output to the remote host... How do I 'backpipe' in such a situation, i.e. login to remote host, tar up some_dir and put it here (on the host I am logged in)? My question is not clear, yes? On hostB I have a directory which when tarred up will be 20MB in size. I have only 5MB free space on hostB so what I want to do is ssh to hostB tar up that directory but redirect the output of tar into hostA where I am logged in. That is what I mean by backpiping ;-) Thanks -Wash -- Odhiambo Washington "The box said 'Requires Wananchi Online Ltd. www.wananchi.com Windows 95, NT, or better,' Tel: 254 2 313985-9 Fax: 254 2 313922 so I installed FreeBSD." GSM: 254 72 743 223 GSM: 254 733 744 121 This sig is McQ! :-) Necessity is a mother. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 3:32: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu08.email.msn.com (cpimssmtpu08.email.msn.com [207.46.181.83]) by hub.freebsd.org (Postfix) with ESMTP id 29FA137B417 for ; Sat, 4 May 2002 03:31:56 -0700 (PDT) Received: from thebe ([67.25.97.177]) by cpimssmtpu08.email.msn.com with Microsoft SMTPSVC(5.0.2195.4905); Sat, 4 May 2002 03:31:18 -0700 From: "Aaron Burke" To: "Aaron Burke" Cc: "FreeBSD-Questions" Subject: RE: exporting /home via SMB Date: Sat, 4 May 2002 03:31:29 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal X-OriginalArrivalTime: 04 May 2002 10:31:18.0891 (UTC) FILETIME=[D3C7D3B0:01C1F356] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG err, forgot path lines. > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Aaron Burke > Sent: Saturday, May 04, 2002 03:24 AM > To: Ilia Chipitsine > Cc: FreeBSD-Questions > Subject: RE: exporting /home via SMB > > > There are a few things about smb.conf that you should realise. > There are a list of the things that Samba can fill in for you. > One of which is the current user logged on. Also search for a > file called smb.conf.default . > > I have taken this info from a book labeled Teach yourself Samba > in 24 hours. > %a How samba reports itself. You should not care about this though > %d The Process ID of the current server process > %g the primary group of username %u (notice case here, > %G the primary group of username %U it kind of matters) > %h is the Internet hostname of the machine which samba is running > %H The home directory of for username %u > %I the IP address of the client machine in dotted decimal form > %p The path to the users home directory as specified in auto.home > The NIS map entry is assumed to be a colon seperated list and is > divided into %N:%p > %P The root directory of the current service. > %R The protocol selected during the protocol negotiation phase > of the connection setup. Valid values are CORE, COREPLUS, LANMAN1, > LANMAN2, or NT1. > %S The name of the current service > %T The current date and time > %u The username of the current service > %U The username of the client requested in the session setup. This > is not neccessarily the same as the one that was used. > %v Samba version number. > > And the important info you may be looking for is in smb.conf.default. > [homes] > browseable = no > comment = User Home Directory > create mode = 0775 > public = no path not really needed here. > > Or, if you care for the whole users directory, setup. > [Any name you want] > browseable = no ; you may want yes > comment = The home dir of my system > create mode = 0775 > public = no ; you may want yes path=/home/usr > > > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ilia Chipitsine > > Sent: Friday, May 03, 2002 10:00 PM > > To: Tim Boring > > Cc: questions@FreeBSD.ORG > > Subject: Re: exporting /home via SMB > > > > > > > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > > > anybody tried that ? > > > > > > What would be the point of that? You can set up the Samba config file > > > > the point of that would be setting a server which imports user database > > using NIS+Kerberos, and home directories would be imported using > > SMB. > > > > > to use a share that will export the home directory of each user. If I > > > remember correctly, it's the [homes] share, or something > close to that. > > > But there is no need to export the /home directory itself. > > > > > > For more info on the Samba config file, check out www.samba.org. > > > > > > Tim > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 3:35:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu11.email.msn.com (cpimssmtpu11.email.msn.com [207.46.181.86]) by hub.freebsd.org (Postfix) with ESMTP id B071237B417 for ; Sat, 4 May 2002 03:35:42 -0700 (PDT) Received: from thebe ([67.25.97.177]) by cpimssmtpu11.email.msn.com with Microsoft SMTPSVC(5.0.2195.4617); Sat, 4 May 2002 03:35:41 -0700 From: "Aaron Burke" To: "Aaron Burke" Cc: "FreeBSD-Questions" Subject: RE: exporting /home via SMB (double mistake) Date: Sat, 4 May 2002 03:35:16 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal X-OriginalArrivalTime: 04 May 2002 10:35:42.0169 (UTC) FILETIME=[70B4DC90:01C1F357] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG errgh, cannot think right now. Please excuse my two errors. The path line for all home dirs would be /home or /usr/home on many systems. Sorry about the mistake > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Aaron Burke > Sent: Saturday, May 04, 2002 03:31 AM > To: Aaron Burke > Cc: FreeBSD-Questions > Subject: RE: exporting /home via SMB > > > err, forgot path lines. > > > -----Original Message----- > > From: owner-freebsd-questions@FreeBSD.ORG > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Aaron Burke > > Sent: Saturday, May 04, 2002 03:24 AM > > To: Ilia Chipitsine > > Cc: FreeBSD-Questions > > Subject: RE: exporting /home via SMB > > > > > > There are a few things about smb.conf that you should realise. > > There are a list of the things that Samba can fill in for you. > > One of which is the current user logged on. Also search for a > > file called smb.conf.default . > > > > I have taken this info from a book labeled Teach yourself Samba > > in 24 hours. > > %a How samba reports itself. You should not care about this though > > %d The Process ID of the current server process > > %g the primary group of username %u (notice case here, > > %G the primary group of username %U it kind of matters) > > %h is the Internet hostname of the machine which samba is running > > %H The home directory of for username %u > > %I the IP address of the client machine in dotted decimal form > > %p The path to the users home directory as specified in auto.home > > The NIS map entry is assumed to be a colon seperated list and is > > divided into %N:%p > > %P The root directory of the current service. > > %R The protocol selected during the protocol negotiation phase > > of the connection setup. Valid values are CORE, COREPLUS, LANMAN1, > > LANMAN2, or NT1. > > %S The name of the current service > > %T The current date and time > > %u The username of the current service > > %U The username of the client requested in the session setup. This > > is not neccessarily the same as the one that was used. > > %v Samba version number. > > > > And the important info you may be looking for is in smb.conf.default. > > [homes] > > browseable = no > > comment = User Home Directory > > create mode = 0775 > > public = no > path not really needed here. > > > > Or, if you care for the whole users directory, setup. > > [Any name you want] > > browseable = no ; you may want yes > > comment = The home dir of my system > > create mode = 0775 > > public = no ; you may want yes Dont use the following line, poor mistake on my part. > path=/home/usr instead use: path = /usr/home > > > > > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ilia > Chipitsine > > > Sent: Friday, May 03, 2002 10:00 PM > > > To: Tim Boring > > > Cc: questions@FreeBSD.ORG > > > Subject: Re: exporting /home via SMB > > > > > > > > > > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > > > > anybody tried that ? > > > > > > > > What would be the point of that? You can set up the Samba > config file > > > > > > the point of that would be setting a server which imports > user database > > > using NIS+Kerberos, and home directories would be imported using > > > SMB. > > > > > > > to use a share that will export the home directory of each > user. If I > > > > remember correctly, it's the [homes] share, or something > > close to that. > > > > But there is no need to export the /home directory itself. > > > > > > > > For more info on the Samba config file, check out www.samba.org. > > > > > > > > Tim > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4: 0:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f66.law3.hotmail.com [209.185.241.66]) by hub.freebsd.org (Postfix) with ESMTP id A6C2937B445 for ; Sat, 4 May 2002 04:00:49 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 4 May 2002 04:00:49 -0700 Received: from 212.109.32.13 by lw3fd.law3.hotmail.msn.com with HTTP; Sat, 04 May 2002 11:00:49 GMT X-Originating-IP: [212.109.32.13] From: "sunil khandelwal" To: freebsd-questions@FreeBSD.ORG Subject: leased line connection Date: Sat, 04 May 2002 11:00:49 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 04 May 2002 11:00:49.0503 (UTC) FILETIME=[F325C6F0:01C1F35A] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear Sirs, I was using a leased line connection through Windows2000 but and there it is simple. I have installed FreeBSD but after trying many times I am not able to install the connection. I have gone through your PPP How to but still unable to do any thing. Can you be kind enough to help me with this. Thanks. Sunil. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4:10:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (mail.broadpark.no [217.13.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 50B6237B429 for ; Sat, 4 May 2002 04:10:15 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by mail.broadpark.no (Postfix) with ESMTP id B3CAB7D67 for ; Sat, 4 May 2002 13:10:08 +0200 (MEST) Received: from 217.13.29.51 ( [217.13.29.51]) as user johann@mail.broadpark.no by mail.broadpark.no with HTTP; Sat, 4 May 2002 13:10:08 +0200 Message-ID: <1020510608.3cd3c1907b484@mail.broadpark.no> Date: Sat, 4 May 2002 13:10:08 +0200 From: johann@broadpark.no To: questions@freebsd.org Subject: Installing .deb packages MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1;q=1.0 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 X-Originating-IP: 217.13.29.51 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I have this WineX application I'd like to run under Linux binary emulation. I'm afraid I'm only familiar with the FreeBSD ports system, and compiling in general. I do not know how to keep track of files if I compile and install a source on my box. I believe .deb's are a bit easier to manage? Thanks -- Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4:20:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta07-svc.ntlworld.com (mta07-svc.ntlworld.com [62.253.162.47]) by hub.freebsd.org (Postfix) with ESMTP id 7EB3F37B417 for ; Sat, 4 May 2002 04:20:33 -0700 (PDT) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta07-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020504112031.RJCY29981.mta07-svc.ntlworld.com@lungfish.ntlworld.com>; Sat, 4 May 2002 12:20:31 +0100 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.6) with ESMTP id g44BKUV17388; Sat, 4 May 2002 12:20:31 +0100 (BST) (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g44BKUI06855; Sat, 4 May 2002 12:20:30 +0100 (BST) (envelope-from scott) Date: Sat, 4 May 2002 12:20:30 +0100 From: Scott Mitchell To: shubhamr Cc: "questions@FreeBSD.ORG" Subject: Re: need info - help Message-ID: <20020504122030.A693@fishballoon.dyndns.org> References: <5.1.0.14.0.20020501192418.02cea050@pop.wsonline.net> <20020502021829.93459BB29@i8k.babbleon.org> <3CD0ACB5.6BF5F69F@malkauns.nsc.com> <20020502043519.940D1BB29@i8k.babbleon.org> <3CD0CE16.5BB28EC8@malkauns.nsc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3CD0CE16.5BB28EC8@malkauns.nsc.com>; from shubhamr@malkauns.nsc.com on Thu, May 02, 2002 at 10:56:46AM +0530 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Thu, May 02, 2002 at 10:56:46AM +0530, shubhamr wrote: > I did set the IP address of my freeBSD machine by the command > ifconfig wx0 139.187.94.95 > > It also took it and showed the same when I gave the command > ifconfig > > Does this mean that the driver for the NIC was loaded successfully?Does > the second ifconfig cammand I gave really reached the driver thru an > ioctl call? I was not able to ping tho'.But want to know if atleast the > attach has happened successfully tho not the transmit/receive? If it shows up in ifconfig, then the driver has been successfully probed and attached. You'll need to provide a bit more information if we're to figure out why you can't ping -- like, what host were you trying to ping, and do you have routing to it; do you actually have a working link between the card and whatever it's plugged into; what is the exact error message, if any? Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4:29:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta07-svc.ntlworld.com (mta07-svc.ntlworld.com [62.253.162.47]) by hub.freebsd.org (Postfix) with ESMTP id 7704537B41D for ; Sat, 4 May 2002 04:29:53 -0700 (PDT) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta07-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020504112952.RNYC29981.mta07-svc.ntlworld.com@lungfish.ntlworld.com>; Sat, 4 May 2002 12:29:52 +0100 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.6) with ESMTP id g44BTqV17412; Sat, 4 May 2002 12:29:52 +0100 (BST) (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g44BTqd06925; Sat, 4 May 2002 12:29:52 +0100 (BST) (envelope-from scott) Date: Sat, 4 May 2002 12:29:52 +0100 From: Scott Mitchell To: shubhamr Cc: "questions@FreeBSD.ORG" Subject: Re: Networking tutorial? Message-ID: <20020504122952.B693@fishballoon.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 09:22:58AM +0530, shubhamr wrote: > Hi , > > Do anyone know about any good tutorial on writing FreeBSD network > drivers?I have searched on it,but could not find any.Only one guide is > there,where he explains to write charater and block devices but has > nothing on network drivers(excepting for the names of the entry points > and *nothing* else). The usual way is to start with an existing driver (if_fxp might be a good choice) and modify it as required. There's some material in Ch. 12 of "The Design and Implementation of the 4.4BSD Operating System" that may be useful. Any documentation on writing *BSD network drivers in general should be relevant to some extent. Could you stop posting your messages as replies to other unrelated threads? You're very likely to e ignored if your posts just appear randomly in the middle of some other discussion... Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4:31:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 39ADC37B417 for ; Sat, 4 May 2002 04:31:17 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by mail.broadpark.no (Postfix) with ESMTP id CA5DA7E0D for ; Sat, 4 May 2002 13:31:15 +0200 (MEST) Received: from 217.13.29.51 ( [217.13.29.51]) as user johann@mail.broadpark.no by mail.broadpark.no with HTTP; Sat, 4 May 2002 13:31:15 +0200 Message-ID: <1020511875.3cd3c683ae894@mail.broadpark.no> Date: Sat, 4 May 2002 13:31:15 +0200 From: johann@broadpark.no To: questions@freebsd.org Subject: mount server:/var/mail /var/mail MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1;q=1.0 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 X-Originating-IP: 217.13.29.51 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi. I'm running Postfix on my gateway, and I've found out the best way to access my workstation's e-mail was through NFS. I've mounted /var/mail. What I'm curious about is what happens when my workstation recieves mail from localhost, since /var/mail is exported by the gateway, I'm sensing some sort of conflict. Also if I want my workstation to do my gateway's makeworld, wouldn't I have to turn everything around and export from my workstation? -- Johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 4:33:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hercules.worldgatein.com (hercules.worldgatein.com [203.109.64.24]) by hub.freebsd.org (Postfix) with ESMTP id D83F537B400 for ; Sat, 4 May 2002 04:33:35 -0700 (PDT) Received: from rivendell.worldgatein.net (interoffice.worldgatein.com [203.109.64.31]) by hercules.worldgatein.com (Postfix) with ESMTP id 440421005236; Sat, 4 May 2002 16:34:09 +0530 (IST) Received: by rivendell.worldgatein.net (Postfix, from userid 1001) id 0D84332611; Sat, 4 May 2002 17:32:38 +0530 (IST) Date: Sat, 4 May 2002 17:32:37 +0530 From: Devdas Bhagat To: Odhiambo Washington Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Help get reverse of this command Message-ID: <20020504173237.A24097@rivendell.worldgatein.net> Reply-To: Devdas Bhagat Mail-Followup-To: Odhiambo Washington , freebsd-questions@FreeBSD.ORG References: <20020504103049.GA30802@ns2.wananchi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020504103049.GA30802@ns2.wananchi.com>; from wash@wananchi.biz on Sat, May 04, 2002 at 01:30:49PM +0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 04/05/02 13:30 +0300, Odhiambo Washington wrote: > I can do this > > tar $some_args some_dirs | /usr/bin/ssh alligator '(cd /home/wash/Administration/Backups; cat > filename.tgz)' > > this pipes the output to the remote host... > > > How do I 'backpipe' in such a situation, i.e. login to remote host, tar up some_dir and put it here (on > the host I am logged in)? ssh hostB -c "tar -zc $files -f - |ssh hostA > file.tgz" or if you have rmt, ssh hostB -c "tar -zcf hostA:file.tgz" man tar is your friend. Devdas Bhagat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 5:11:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from gull.prod.itd.earthlink.net (gull.mail.pas.earthlink.net [207.217.120.84]) by hub.freebsd.org (Postfix) with ESMTP id A5A1637B417 for ; Sat, 4 May 2002 05:11:13 -0700 (PDT) Received: from user-119a2km.biz.mindspring.com ([66.149.10.150] helo=scee.dsj.net) by gull.prod.itd.earthlink.net with esmtp (Exim 3.33 #2) id 173yNb-0007YN-00; Sat, 04 May 2002 05:11:11 -0700 Received: from dsj by scee.dsj.net with local (Exim 3.35 #1 (Debian)) id 173yNr-0005yX-00; Sat, 04 May 2002 08:11:27 -0400 Date: Sat, 4 May 2002 08:11:27 -0400 From: "David S. Jackson" To: johann@broadpark.no Cc: questions@freebsd.org Subject: Re: Installing .deb packages Message-ID: <20020504121127.GF12237@scee.dsj.net> Reply-To: "David S. Jackson" References: <1020510608.3cd3c1907b484@mail.broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1020510608.3cd3c1907b484@mail.broadpark.no> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 01:10:08PM +0200 johann@broadpark.no wrote: > Hi. > > I have this WineX application I'd like to run under Linux binary emulation. > > I'm afraid I'm only familiar with the FreeBSD ports system, and compiling in > general. I do not know how to keep track of files if I compile and install a > source on my box. I believe .deb's are a bit easier to manage? I use Debian quite a bit on some other boxes. Deb's are the binary packages installed on a Debian Linux system (they can be source too). I I don't understand why you would want any on your FreeBSD system though. I personally think the FreeBSD packaging system can be as friendly as apt-get; at this point I'm still more comfortable with Debian apt-get and FreeBSD ports, though, than with pkg_*. As far as installing your own non-port sources in /usr/local/src, I'm not sure how you would add that to your package database without porting the sources and then making a port yourself. Or you can look at man pkg_create. -- David S. Jackson dsj@dsj.net =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Humorists always sit at the children's table. -- Woody Allen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 5:32:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hose.mail.pipex.net (hose.mail.pipex.net [158.43.128.58]) by hub.freebsd.org (Postfix) with SMTP id 5FBE437B41A for ; Sat, 4 May 2002 05:32:04 -0700 (PDT) Received: (qmail 18882 invoked from network); 4 May 2002 12:32:03 -0000 Received: from userhh092.dsl.pipex.com (HELO ThisAddressDoesNotExist) (62.190.215.92) by smtp-4.dial.pipex.com with SMTP; 4 May 2002 12:32:03 -0000 Subject: Update => Re: Error upgrading ImageMagick-5.4.4 with portupgrade From: "S. Roberts" Reply-To: sroberts@dsl.pipex.com To: freebsd-questions@freebsd.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 Date: 04 May 2002 13:28:01 +0100 Message-Id: <1020515281.280.12.camel@Demon.Strobe.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I've got an update to my earlier posting:- I went ahead with the option: make NO_CHECKSUM=yes which appeared to run through the upgrade to ImageMagick-5.4.4.5 without any errors. But then after running pkg_version -v, I still get: # pkg_version -v AbiWord-gnome-1.0.0 = up-to-date with port ImageMagick-5.4.4 < needs updating (port has 5.4.4.5) Mesa-3.4.2_2 = up-to-date with port ORBit-0.5.15_1 = up-to-date with port a2ps-letterdj-4.13_1 = up-to-date with port aalib-1.4.r5_1 = up-to-date with port Re-running portupgrade getsme this again: # portupgrade ImageMagick-5.4.4 ---> Upgrading 'ImageMagick-5.4.4' to 'ImageMagick-5.4.4.5' (graphics/ImageMagick) ---> Building '/usr/ports/graphics/ImageMagick' ===> Cleaning for libiconv-1.7_4 ===> Cleaning for bison-1.35_1 ===> Cleaning for gettext-0.11.1_2 ===> Cleaning for gmake-3.79.1_1 ===> Cleaning for libtool-1.3.4_3 ===> Cleaning for pkgconfig-0.12.0 ===> Cleaning for jbigkit-1.2 ===> Cleaning for jpeg-6b_1 ===> Cleaning for lcms-1.08 ===> Cleaning for libfpx-1.2.0.4 ===> Cleaning for libmpeg2-0.2.1 ===> Cleaning for libwmf-0.2.2_1 ===> Cleaning for png-1.2.2_1 ===> Cleaning for tiff-3.5.7 ===> Cleaning for python-2.2.1 ===> Cleaning for freetype2-2.0.9 ===> Cleaning for ghostscript-gnu-7.05 ===> Cleaning for libxml2-2.4.21 ===> Cleaning for XFree86-3.3.6_11 ===> Cleaning for ImageMagick-5.4.4.5 ===> Extracting for ImageMagick-5.4.4.5 >> Checksum mismatch for ImageMagick-5.4.4-5.tar.gz. Make sure the Makefile and distinfo file (/usr/ports/graphics/ImageMagick/distinfo) are up to date. If you are absolutely sure you want to override this check, type "make NO_CHECKSUM=yes [other args]". *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. ** Command failed: make ** Fix the problem and try again. ** The following packages were not installed or upgraded (*:skipped / !:failed) ! graphics/ImageMagick (ImageMagick-5.4.4) (checksum mismatch) # Something's definitely *not* right here.., I would have thought that if the make option to ignore checksum validity were wrong, I'd at least get *some* indication of a failure to upgrade to the new version. Now figuring I'd simply deinstall the port and re-install, I'm not faced with: # make deinstall ===> Deinstalling for ImageMagick-5.4.4.5 ===> ImageMagick-5.4.4.5 not installed, skipping # So I try another removal method: # cd /var/db/pkg # pkg_delete ImageMagick-5.4.4 pkg_delete: package 'ImageMagick-5.4.4' is required by these other packages and may not be deinstalled: apsfilter-7.2.2 # I'm now somewhat weary of interfering anymore with other installed (and working) software.., Is anyone else seeing this problem? Can anyone assist, please? Stacey Hi Martin, Thanks for getting back to me about my query. In short, "yes"., I was kinda hoping for a pointer to resolving the mismatching checksums before actually deciding what to do. I am aware that I can set the makefile option to ignore checksum, but I figure they're there for some good reason, aren't they? OT though., I also posted another question on using pgp on my FSDB server to digitally sign messages and e-mail (using Evolution as the mail client),and noticed that you have your e-mail done so:-) Is it possible that you might give me some pointers on using pgpon my system? In particular, I found that the documentation at www.pgpi.com takes a somewhat Windows & Mac view of things, and I can't seem to track down any FSDB-specif HowTo's and/or tutorials., Which verison of pgp are you running? Do you use a gui-based mail client with switches to encrypt/sign messages/attachments? Hope you didn't mind muyh heading off-topic too much. Let me know either way, okay? Stacey On Fri, 2002-05-03 at 23:41, Martin Karlsson wrote: > * S. Roberts [2002-05-03 21.52 +0100]: > > Hi, > > I've just run portupgrade for ImageMagick-5.4.4 and got the errors > > below. > > > > # portupgrade -R ImageMagick-5.4.4 > > ---> Upgrading 'ImageMagick-5.4.4' to 'ImageMagick-5.4.4.5' > > (graphics/ImageMagick) > > [...snip...] > > > check, type "make NO_CHECKSUM=yes [other args]". > > *** Error code 1 > > What are you trying to do? If you think you can trust the tarball, > then doing: > 'portupgrade -Rm NO_CHECKSUM=yes ImageMagick-5.4.4' > > should work. (man portupgrade is your friend) > > If you're trying to _resolve_ the checksum mismatch, I'm sorry, but I > don't know how to do that. > > HTH > -- > Martin Karlsson - 0x9C924660 -- Stacey Roberts B.Sc. (HONS) Computer Science Network Systems Engineer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 5:35:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from cpimssmtpu01.email.msn.com (cpimssmtpu01.email.msn.com [207.46.181.77]) by hub.freebsd.org (Postfix) with ESMTP id CF66837B416 for ; Sat, 4 May 2002 05:35:09 -0700 (PDT) Received: from thebe ([67.25.97.177]) by cpimssmtpu01.email.msn.com with Microsoft SMTPSVC(5.0.2195.4905); Sat, 4 May 2002 05:34:32 -0700 From: "Aaron Burke" To: "Joe & Fhe Barbish" Cc: "FreeBSD-Questions" Subject: RE: Runing games behind gateway with private ip address. Date: Sat, 4 May 2002 05:34:43 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal X-OriginalArrivalTime: 04 May 2002 12:34:33.0170 (UTC) FILETIME=[0B1D4320:01C1F368] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have had a similar problem playing Warcraft 2 online. Luckily the software told me that I needed to open up port 6112 for battle.net to work ok. If you are running a firewall this may be an option. I also use dhcp to assign 192.168 addresses to my lan, and run a firewall. The workstations (some windows, some freebsd) dont even know that there is a firewall open. Keep in mind that I am no expert in this situation, and my answer may not answer your question. But if you are running a firewall, keep these options open. > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Joe & Fhe > Barbish > Sent: Friday, May 03, 2002 02:16 PM > To: FBSDQ > Subject: Runing games behind gateway with private ip address. > > > I have FBSD configured as gateway with private ip address for Lan > with 2 win98 workstations. I use user ppp with -Nat to dial out to > my ISP using external modem. This environment work fine for all > internet sessions from the lan except for games. When I try to play > a game that connects to the internet to play against other players > the game just hangs after making contact with the game server. > When I test the win98 workstation by having it dials out to the internet > direct using it's own modem, the game plays correctly. > > It's like the game knows the workstation's ip address is being Nat as > it passes through the FBSD gateway. > > How do I go about faking out the lan Win98 workstation so it thinks it > has an public ip address? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 5:36:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id A6B0937B41A for ; Sat, 4 May 2002 05:36:08 -0700 (PDT) Received: from yokozuna.bsd ([213.10.35.60]) by smtp03.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVL70601.FDR; Sat, 4 May 2002 14:36:06 +0200 Date: Sat, 4 May 2002 14:34:59 +0200 (CEST) From: Marco Beishuizen Reply-To: Marco Beishuizen To: Chris Hill Cc: FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver In-Reply-To: Message-ID: <20020504142014.E299-100000@yokozuna.bsd> FreeBSD: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, the wise Chris Hill spoke, and said: > On Sat, 4 May 2002, Marco Beishuizen wrote: > > > [...] I installed a JetDirect 600N on my HP laserjet 2100, and I'm > > using apsfilter to install the printer. > > > > Well, my question is how to print... Apsfilter needs to know about the > > IP adress and hostname of the printer. How do I know what the hostname > > and the IP adress of the JetDirect are? > > Don't know anything about apsfilter, but I have two printers with > JetDirect interfaces. In both cases, you can set the IP address from the > printer's front panel. Look for a menu that says something about "MIO > configure", and then "IP address" under that. Once you've set that, you > can telnet to the printer and set up the rest. The newer HP printers > have an embedded web server, and you can just point a browser to the > printer's IP and configure away using their GUI. It's a LaserJet 2100, and initially it didn't have a printserver in it. The printer doesn't have a panel with a menu. So my problem now is that if I want to know what the IP adress is I need to telnet to the printserver, but for telnetting I need to know the IP adress. The only "adresses" I can find, are on the JetDirect itself: TR: 000C83B1D029 AD: 0030C18D0B94 Is it possible to configure it with this info? > The hostname is whatever you say it is - put an entry in /etc/hosts to > match the IP address you set on the printer. > > HTH. > > -- > Chris Hill chris@monochrome.org > ** [ Busy Expunging <|> ] > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Marco --  *** System shutdown message from root *** System going down in 60 seconds To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 5:59:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp08.wxs.nl (smtp08.wxs.nl [195.121.6.40]) by hub.freebsd.org (Postfix) with ESMTP id DEA0537B41A for ; Sat, 4 May 2002 05:59:24 -0700 (PDT) Received: from yokozuna.bsd ([213.10.35.60]) by smtp08.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVL82Y02.28A; Sat, 4 May 2002 14:59:22 +0200 Date: Sat, 4 May 2002 14:58:15 +0200 (CEST) From: Marco Beishuizen Reply-To: Marco Beishuizen To: Warren Block Cc: FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver In-Reply-To: Message-ID: <20020504143519.C299-100000@yokozuna.bsd> FreeBSD: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, 3 May 2002, the wise Warren Block spoke, and said: > On Sat, 4 May 2002, Marco Beishuizen wrote: > > > Well, my question is how to print... Apsfilter needs to know about the > > IP adress and hostname of the printer. How do I know what the hostname > > and the IP adress of the JetDirect are? > > IP address and hostname? Or IP address and queue name? Apsfilter asks for a "full qualified hostname or IP address" and "the remote printer name". The remote printer name will most likely be "raw" according to Apsfilter (same as the queue name I guess). > JetDirects used to have a default address of 192.0.0.192, I think, > although that may not be the case any more. If you can telnet to the > JetDirect, you can change the IP address and its local hostname. The default adress doesn't work. The problem now is that I can't telnet to the JetDirect because I don't have the IP adress. > Some of the cheaper units may not have a default IP address assigned. > You might have to run HP's JetAdmin software to configure these units > initially. Dunno if there's a version of JetAdmin for anything other > than Windows. I bought it on Ebay for EUR 75. It has documentation and drivers for HP-UX, Solaris and Windows on cd-rom. Unfortunately these drivers don't work on FreeBSD. > After an IP address has been assigned, you can set up a hostname in > /etc/hosts. (I've never been sure what purpose the hostname set in the > JetDirect itself serves, other than when you have a bunch of them you > can verify that you've got the right one.) > > There are two queue names you can use: "raw" is an untranslated queue > that just passes everything through (most likely what you want), and > "text" does some cooking of the input. > > -Warren Block * Rapid City, South Dakota USA > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Marco -- Always remember that you are unique. Just like everyone else. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 6: 3:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tninet.se (lennier.tninet.se [195.100.94.105]) by hub.freebsd.org (Postfix) with ESMTP id A7E6A37B405 for ; Sat, 4 May 2002 06:03:49 -0700 (PDT) Received: from cs.umu.se (h150n1c1o1023.bredband.skanova.com [213.64.164.150]) by lennier.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 695634.517468.1020.0s29009620lennier ; Sat, 04 May 2002 15:04:28 +0200 Message-ID: <3CD3DC32.35A8EF0A@cs.umu.se> Date: Sat, 04 May 2002 15:03:47 +0200 From: Paul Everlund X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: sv,en MIME-Version: 1.0 To: sroberts@dsl.pipex.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Update => Re: Error upgrading ImageMagick-5.4.4 with portupgrade References: <1020515281.280.12.camel@Demon.Strobe.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "S. Roberts" wrote: > > Hello, > I've got an update to my earlier posting:- > I went ahead with the option: > make NO_CHECKSUM=yes > which appeared to run through the upgrade to ImageMagick-5.4.4.5 without > any errors. But then after running pkg_version -v, I still get: > # pkg_version -v > AbiWord-gnome-1.0.0 = up-to-date with port > ImageMagick-5.4.4 < needs updating (port has > 5.4.4.5) > Mesa-3.4.2_2 = up-to-date with port > ORBit-0.5.15_1 = up-to-date with port > a2ps-letterdj-4.13_1 = up-to-date with port > aalib-1.4.r5_1 = up-to-date with port > > > Re-running portupgrade getsme this again: > > # portupgrade ImageMagick-5.4.4 > ---> Upgrading 'ImageMagick-5.4.4' to 'ImageMagick-5.4.4.5' > (graphics/ImageMagick) > ---> Building '/usr/ports/graphics/ImageMagick' > ===> Cleaning for libiconv-1.7_4 > ===> Cleaning for ImageMagick-5.4.4.5 > ===> Extracting for ImageMagick-5.4.4.5 > >> Checksum mismatch for ImageMagick-5.4.4-5.tar.gz. > Make sure the Makefile and distinfo file > (/usr/ports/graphics/ImageMagick/distinfo) > are up to date. If you are absolutely sure you want to override this > check, type "make NO_CHECKSUM=yes [other args]". > *** Error code 1 > > Stop in /usr/ports/graphics/ImageMagick. > ** Command failed: make > ** Fix the problem and try again. > ** The following packages were not installed or upgraded (*:skipped / > !:failed) > ! graphics/ImageMagick (ImageMagick-5.4.4) (checksum mismatch) > # > > Something's definitely *not* right here.., I would have thought that if > the make option to ignore checksum validity were wrong, I'd at least get > *some* indication of a failure to upgrade to the new version. If you've downloaded the *.tar.gz file for ImageMagick, v 5.4.4.5, and beleive it's the correct one, and want to fix the checksum error, then you could try to do this: cd /usr/ports/distfiles Do a ls and you should see the ImageMagick-5.4.4.5.tar.gz, or something like that. Now do this: md5 ImageMagick-5.4.4.5.tar.gz > ../graphics/ImageMagick/distinfo Try once more to do your upgrade as you did before... Did it work ok now? The paths given above, and maybe the name of the tar.gz file might be wrong, so fill in the correct values. A checksum error could also, by the way, indicate that the file is not correct downloaded, due to a network error or something else. Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 6:16:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from quasar.veloxia.com (quasar.veloxia.com [62.43.248.40]) by hub.freebsd.org (Postfix) with SMTP id 2757D37B41D for ; Sat, 4 May 2002 06:16:26 -0700 (PDT) Received: (qmail 13001 invoked by uid 0); 4 May 2002 13:12:34 -0000 Received: from unknown (HELO jazztel) (62.14.122.245) by quasar.veloxia.com with SMTP; 4 May 2002 13:12:34 -0000 Message-ID: <000901c1f36d$9aa3dea0$f57a0e3e@jazztel.es> From: "hasganado" To: Subject: INVITACION A NUESTRO PORTAL Date: Sat, 4 May 2002 15:14:09 +0200 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0006_01C1F37E.58C4B5C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0006_01C1F37E.58C4B5C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Apartado de Correos 24385 (08080). Barcelona ---- = Espa=F1a Tel. +(34) 93-348 13 16 = Tel. M=F3vil. + (34) 629 96 43 66 www.barcelonareservas.com =20 EL MACRO PORTAL DE OCIO = Y TURISMO=20 -------------------------------------------------------------------------= ------- Sr./ Sra.: Tenemos el placer de invitarle = a visitar el reci=E9n nacido Macro Portal de Ocio y Turismo. = http://WWW.BARCELONARESERVAS.COM =20 Nada mas nacer ya esta batiendo record de = visitas, en en tan solo dos meses, se ha colocado en posiciones destacadas, en los mas importantes buscadores de la red a = nivel mundial, escalando d=EDa tras d=EDa en una carrera fren=E9tica sin = fin. Por esto, y debido a la gran acogida, con el animo de dar un mejor = servicio, se est=E1n confeccionando nuevos servicios y contenidos, as=ED = como numerosas secciones, que muy pronto ver=E1n la luz en la web, = incluyendo variedad de informaciones de inter=E9s, con diversos canales tem=E1ticos. Por este motivo y porque nuestros clientes se merecen lo mejor, = mejoramos cada d=EDa, por lo que le invitamos a conocernos. Para celebrar este nacimiento, QUEREMOS OBSEQUIARLE de forma irrepetible = con una OFERTA QUE MANTENDREMOS DURANTE DOS MESES. Para que Ud. pueda = incluir su negocio en la Base de Datos del Macro Portal de Ocio y = Turismo de Barcelona, as=ED como para que pueda contratar su publicidad = en el mismo. Inf=F3rmese sin compromiso, para ello puede llamar a los tel=E9fonos = 93 348 13 16 y 629 96 43 66 o bien solicitar =20 informaci=F3n por mail haciendo clic aqui. Inf=F3rmese de como por un coste m=EDnimo, puede dar un empuj=F3n = notorio a su establecimiento, publicitarlo, y conseguir =20 muchos clientes que est=E1n esperando porque no le conocen hasta hoy. Barcelonareservas le ofrece, un equipo de profesionales las 24 horas a = su servicio, para satisfacer todas sus necesidades en=20 publicidad, marketing y promoci=F3n de su negocio, a un coste = infinitamente mas bajo de lo que nunca llego a imaginar. Si desea acceder directamente a algunos de nuestros servicios puede ir = directamente desde estos enlaces a: RESTAURANTES (Selecci=F3n de los mejores de Barcelona y provincia). =20 TIENDAS (En la secci=F3n FASHION, encontrara todas las tiendas de ropa = y complementos). =20 HOTELES (M=E1s de 3.500 plazas hoteleras, hostales, pisos de = alquiler,residencias..). FIESTAS (Organizamos todo tipo de fiestas, convenciones, celebraciones, = etc...) MODELOS Y ACTORES ( Amplia cartera de Modelos y Actores) Esto solo es una peque=F1a muestra de la multitud de servicios que le = ofrecemos, y a los cuales le =20 brindamos la oportunidad de acceder a SU JUSTO PRECIO. PORQUE TRIUNFAR NO SIGNIFICA PARA NADA PAGAR MAS DE LA CUENTA =20 No espere mas y solicite informaci=F3n a nuestros asesores =20 Gracias por la confianza depositada en Barcelonareservas.com Atentamente, Tomas Garcia. Director de Barcelonareservas ------=_NextPart_000_0006_01C1F37E.58C4B5C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
3D""         =20 Apartado de Correos =20 24385  (08080). Barcelona  ----   = ;=20 Espa=F1a
         &n= bsp;           &nb= sp;           &nbs= p;    Tel.  =20 +(34)  93-348 13 16      Tel. M=F3vil. + = (34) =20  629 96 43 66     www.barcelonareservas.com<= /STRONG>
          &nbs= p;     =20         
           &n= bsp;           &nb= sp;     =20  EL     MACRO   =20 PORTAL     DE    =20 OCIO     Y     TURISMO =
 
          &nbs= p;      =20 Sr./ Sra.:
 
           &n= bsp;           &nb= sp;           &nbs= p;    =20 Tenemos el placer de invitarle a visitar el reci=E9n nacido Macro Portal = de Ocio y=20 Turismo.
 
           &n= bsp;           &nb= sp;           &nbs= p;            = ;            =          http://WWW.BARCELONARESERVAS.CO= M
           &n= bsp;           &nb= sp;           &nbs= p;            = ;            =           =20
           &n= bsp;           &nb= sp;     Nada=20 mas nacer ya esta batiendo record de visitas, en en tan solo dos = meses, se=20 ha colocado en
 posiciones destacadas, en  los mas importantes = buscadores de la=20 red a nivel mundial, escalando d=EDa tras d=EDa en una carrera = fren=E9tica sin=20 fin.
 
Por esto, y debido a la gran acogida, con el animo de dar un mejor=20 servicio, se est=E1n confeccionando nuevos servicios y contenidos, = as=ED como=20 numerosas secciones, que muy pronto ver=E1n la luz en la web,=20 incluyendo variedad de informaciones de
inter=E9s, con diversos canales tem=E1ticos.
 
Por este motivo y porque nuestros clientes se merecen lo mejor, = mejoramos=20 cada d=EDa, por lo que le invitamos a conocernos.
 
Para celebrar este nacimiento, QUEREMOS=20 OBSEQUIARLE de forma irrepetible con una OFERTA  QUE MANTENDREMOS DURANTE DOS = MESES. Para=20 que Ud. pueda incluir su negocio en la Base de Datos del Macro Portal de = Ocio y=20 Turismo de Barcelona, as=ED como para que pueda contratar su publicidad = en el=20 mismo.
 
  Inf=F3rmese sin compromiso, para ello puede = llamar a=20 los tel=E9fonos 93 348 13 16  y  629  96  43  = 66 o bien=20 solicitar   
  informaci=F3n por mail haciendo clic aqui.
 
  Inf=F3rmese de como por un coste m=EDnimo, puede dar un = empuj=F3n=20 notorio a su establecimiento, publicitarlo, y conseguir   =
  muchos clientes que est=E1n esperando porque no le conocen = hasta=20 hoy.
 
 
  Barcelonareservas le ofrece, un equipo de profesionales las = 24 horas=20 a su servicio, para satisfacer todas sus necesidades en
  publicidad, marketing y promoci=F3n de su negocio, a un = coste=20 infinitamente mas bajo de lo que nunca llego a imaginar.
 
  Si desea acceder directamente a algunos de nuestros = servicios puede=20 ir directamente desde estos enlaces a:
 
RESTAURANTES (Selecci=F3n de los mejores de Barcelona y = provincia).
           &n= bsp;           &nb= sp;           &nbs= p;  =20
TIENDAS  (En la secci=F3n FASHION, encontrara todas las = tiendas de ropa=20 y complementos).
           &n= bsp;           &nb= sp;           &nbs= p;   
HOTELES (M=E1s de 3.500 plazas hoteleras, hostales, pisos de=20 alquiler,residencias..).
 
 
FIESTAS  (Organizamos todo tipo de fiestas, convenciones,=20 celebraciones, etc...)
 
MODELOS Y ACTORES      (  Amplia = cartera=20 de Modelos y Actores)
 
 
Esto solo es una peque=F1a muestra de la multitud de servicios que = le=20 ofrecemos, y a los cuales le      
 
brindamos la oportunidad de acceder a SU JUSTO=20 PRECIO.
 
 
PORQUE TRIUNFAR NO SIGNIFICA PARA = NADA=20 PAGAR MAS DE LA CUENTA
 
        &= nbsp;=20
 
No espere mas y solicite = informaci=F3n a nuestros=20 asesores
 
        &= nbsp;           &n= bsp;=20
 
 
Gracias por la confianza depositada en Barcelonareservas.com
 
 
 
 
 
 
          =            =20   Atentamente,
 
 
          =           =20    Tomas  Garcia.
         Director = de=20 Barcelonareservas
 
 
 
 
 
 
------=_NextPart_000_0006_01C1F37E.58C4B5C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 6:18:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.broadpark.no (217-13-4-9.dd.nextgentel.com [217.13.4.9]) by hub.freebsd.org (Postfix) with ESMTP id 6913537B41C for ; Sat, 4 May 2002 06:18:48 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by mail.broadpark.no (Postfix) with ESMTP id 0E21A7FF6 for ; Sat, 4 May 2002 15:18:42 +0200 (MEST) Received: from 217.13.29.51 ( [217.13.29.51]) as user johann@mail.broadpark.no by mail.broadpark.no with HTTP; Sat, 4 May 2002 15:18:41 +0200 Message-ID: <1020518321.3cd3dfb1d2b4b@mail.broadpark.no> Date: Sat, 4 May 2002 15:18:41 +0200 From: johann@broadpark.no To: questions@freebsd.org Subject: dead screen shells problem MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1;q=1.0 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.0 X-Originating-IP: 217.13.29.51 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hi. on my workstation, screen works like a charm. on my gateway, however, they seem to die out all the time. --- ::: johann[muay] [~/mp3] % screen -r [15:10] Remove dead screens with 'screen -wipe'. [detached] --- that happens every time i reattach a screen. if i only have one running, it's most likely left alone. if i run, let's say two, this is what happens quite so often: --- ::: johann[muay] [~] % screen -r [14:59] There are several suitable screens on: 253.ttyp0.muay (Detached) 276.ttyp0.muay (Detached) Type "screen [-d] -r [pid.]tty.host" to resume one of them. ::: johann[muay] [~] % screen -r 253.ttyp0.muay [14:59] There is a screen on: 253.ttyp0.muay (Dead ???) Remove dead screens with 'screen -wipe'. There is no screen to be resumed matching 253.ttyp0.muay. --- has anyone ever had the same problem? regards, -- johann To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 6:27:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tninet.se (lennier.tninet.se [195.100.94.105]) by hub.freebsd.org (Postfix) with ESMTP id 1E41637B400 for ; Sat, 4 May 2002 06:27:14 -0700 (PDT) Received: from cs.umu.se (h150n1c1o1023.bredband.skanova.com [213.64.164.150]) by lennier.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 415275.518874.1020.0s29015323lennier ; Sat, 04 May 2002 15:27:54 +0200 Message-ID: <3CD3E1B0.3D600CE4@cs.umu.se> Date: Sat, 04 May 2002 15:27:12 +0200 From: Paul Everlund X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: sv,en MIME-Version: 1.0 To: sroberts@dsl.pipex.com Cc: freebsd-questions@freebsd.org Subject: Re: Update => Re: Error upgrading ImageMagick-5.4.4 with portupgrade References: <1020515281.280.12.camel@Demon.Strobe.org> <3CD3DC32.35A8EF0A@cs.umu.se> <1020517860.280.18.camel@Demon.Strobe.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "S. Roberts" wrote: > > Hi Paul, > Thansk for getting back to me. You're welcome. > I've not tried your solution as yet, mainly because I have a question on > your last point - namely the question as to whether or not the actual > file downloaded by portupgrade is indeed the correct one! Try to locate it at the ImageMagick's web site and download it manually into the /usr/ports/distfiles directory. Then you should have the correct one. > Since the initial error, I've removed the downloaded tar file and re-run > cvsup on my ports three times - started early this mornning (GMT), all > returning results that tell me that the current ImageMagick-5.4.4 is out > of date and that there is an updated version available. > > On all three attempts at upgrading, I get the same error. So, I figure > that there very well might be something wrong with the tar file > available? > > What do you think? Are you using this port, by chance? Yep. But I haven't done any upgrade of it, to 5.4.4.5. As of writing this I don't even know which version I have. :-) Either the distinfo file in /usr/ports/graphics/ImageMagick is wrong, and you can fix it as I proposed, or it's the ImageMagick tar.gz file that is wrong. If it's the latter, then you can not do an upgrade, as you need at least the correct sources to be able to compile the application. Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 7: 4:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.rwwa.com (ns1.rwwa.com [66.92.67.110]) by hub.freebsd.org (Postfix) with ESMTP id DAC3B37B41A; Sat, 4 May 2002 07:04:53 -0700 (PDT) Received: from rwwa.com (harvey.rwwa.com [192.124.97.11]) by ns1.rwwa.com (Postfix) with ESMTP id 95F463271; Sat, 4 May 2002 10:04:51 -0400 (EDT) X-Mailer: exmh version 2.5 07/13/2001 with nmh-1.0.4 To: Joe Marcus Clarke Cc: "Frank ." , questions@FreeBSD.ORG, sobomax@FreeBSD.ORG Subject: Re: Galeon 1.2.1 problems In-Reply-To: Your message of "27 Apr 2002 22:38:16 EDT." <1019961496.1579.28.camel@gyros.marcuscom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 04 May 2002 10:04:57 -0400 From: User Witr Message-Id: <20020504140451.95F463271@ns1.rwwa.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG marcus@marcuscom.com said: :-Are you building galeon with -DWITH_FULL_MOZILLA? IF not, you should :-be. Sorry for the delay in trying this...work intrudes! Anyway, no-joy. I am still getting the symptom where it takes forever (as in several minutes) for galeon to display http://my.yahoo.com whereas linux netscape 4.79 can do it in a second or less... In fact it is taking so long that I haven't had time to see if this fixes my other gripe of cookies not being persistent. Recall that this is on 4.5REL, and I have (after each rebuild) zeroed out my .galeon and .gconf directories. Thanks! --------------------------------------------------------------------- Robert Withrow, R.W. Withrow Associates, Swampscott MA, witr@rwwa.COM To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 7:39:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from sdns.kv.ukrtel.net (sdns.kv.ukrtel.net [195.5.27.246]) by hub.freebsd.org (Postfix) with ESMTP id A9B4437B41B; Sat, 4 May 2002 07:39:13 -0700 (PDT) Received: from vega.vega.com (195.5.51.243 [195.5.51.243]) by sdns.kv.ukrtel.net with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) id J9KHZB5Z; Sat, 4 May 2002 17:40:54 +0300 Received: (from max@localhost) by vega.vega.com (8.11.6/8.11.3) id g44EdPD16134; Sat, 4 May 2002 17:39:25 +0300 (EEST) (envelope-from sobomax@FreeBSD.org) From: Maxim Sobolev Message-Id: <200205041439.g44EdPD16134@vega.vega.com> Subject: Re: Galeon 1.2.1 problems To: witr@rwwa.com (User Witr) Date: Sat, 4 May 2002 17:39:24 +0300 (EEST) Cc: marcus@marcuscom.com (Joe Marcus Clarke), dimspyder@hotmail.com (Frank .), questions@FreeBSD.ORG, sobomax@FreeBSD.ORG In-Reply-To: <20020504140451.95F463271@ns1.rwwa.com> from "User Witr" at May 04, 2002 10:04:57 AM X-Mailer: ELM [version 2.5 PL5] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How much memory do you have? It is not recommended (and mostly impossible) to use galeon/mozilla on a machine with less than 64MB of RAM. Netscape 4.xx if much less memory hungry. -Maxim > > > marcus@marcuscom.com said: > :-Are you building galeon with -DWITH_FULL_MOZILLA? IF not, you should > :-be. > > Sorry for the delay in trying this...work intrudes! > > Anyway, no-joy. I am still getting the symptom where it takes forever > (as in several minutes) for galeon to display http://my.yahoo.com whereas > linux netscape 4.79 can do it in a second or less... > > In fact it is taking so long that I haven't had time to see if this > fixes my other gripe of cookies not being persistent. > > Recall that this is on 4.5REL, and I have (after each rebuild) zeroed out > my .galeon and .gconf directories. > > Thanks! > > > --------------------------------------------------------------------- > Robert Withrow, R.W. Withrow Associates, Swampscott MA, witr@rwwa.COM > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 7:40:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id 3D7FE37B425 for ; Sat, 4 May 2002 07:39:53 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g44EdquF075749; Sat, 4 May 2002 08:39:52 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g44EdqFf075746; Sat, 4 May 2002 08:39:52 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Sat, 4 May 2002 08:39:52 -0600 (MDT) From: Warren Block To: Marco Beishuizen Cc: FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver In-Reply-To: <20020504143519.C299-100000@yokozuna.bsd> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, Marco Beishuizen wrote: > > Some of the cheaper units may not have a default IP address assigned. > > You might have to run HP's JetAdmin software to configure these units > > initially. Dunno if there's a version of JetAdmin for anything other > > than Windows. > > I bought it on Ebay for EUR 75. It has documentation and drivers for > HP-UX, Solaris and Windows on cd-rom. Unfortunately these drivers > don't work on FreeBSD. The easiest way to set it up initially is probably to use a Windows machine, install JetAdmin on it, and let that find the JetDirect for you. Then you can set an IP address. Otherwise, you may be able to see the JetDirect's IP address if you run a network monitor of some sort. I'm pretty sure ntop would show it as long as it's plugged into a hub with your computer (not a switch). (ntop is listed as "forbidden" in ports because it has a remote exploit. You can modify the Makefile to install it, but be sure you understand the problem and that the system is inaccessible from outside.) -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 7:44:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21501.mail.yahoo.com (web21501.mail.yahoo.com [66.163.169.12]) by hub.freebsd.org (Postfix) with SMTP id E5E6837B420 for ; Sat, 4 May 2002 07:44:00 -0700 (PDT) Message-ID: <20020504144400.33409.qmail@web21501.mail.yahoo.com> Received: from [66.3.230.240] by web21501.mail.yahoo.com via HTTP; Sat, 04 May 2002 07:44:00 PDT Date: Sat, 4 May 2002 07:44:00 -0700 (PDT) From: Jeff Mitchell Subject: A PPTP VPN success story To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG keywords: pptp vpn mpd ipfilter ipnat tunnel tunneling Windows 2000 Cool, it works! I have Windows 2000 pptp clients connecting at "maximum strength" 128-bit encryption with MS-CHAPv2 authentication to a freebsd 4.5-RELEASE-p4 box. This is only on a per-computer basis right now; I haven't tried LAN-to-LAN yet. (Supposedly there is a "Dial-Up Networking 128-bit Encryption Upgrade" for Windows 98 (SE?) but I've yet to see anyone successfully find and install and run it.) Some comments/questions/suggestions: --- Make sure clients have "enable pptp pass-through" or equivalent on their router. Some very confusing errors can result if the router is somehow blocking pptp. For instance, looking at the mpd output on the server you'll see clients trying to connect but it will seem like mpd just doesn't recognize or allow the protocol. --- mpd.secret.sample was misleading because it had a sample client assigned to 192.168.1.1, whereas 192.168.1.1 was used as the mpd server in mpd.conf.sample and mpd.links.example. So for a while my test client was getting the 192.168.1.1 address which of course resulted in a useless/unusable connection (but Windows still said the connection was valid). --- mpd will always try to load the kernel module, giving you mucho errors if you already have NETGRAPH and/or NETGRAPH_* in your kernel. So I guess the rule is, "Don't compile netgraph into your kernel!" which should be explicitly stated somewhere (unless I missed it). Or maybe mpd could check before trying to load it? --- Clients are unable to look up computers by name or see computers in the 'Network Neighborhood'. We have a Windows 2000 server running WINS at 192.168.1.2, and 'ipconfig /all' on the clients appropriately says that their primary WINS server is at 192.168.1.2. The WINS database is nonempty. What is wrong? Typing in the ip address explicitly in explorer works, e.g. "\\192.168.1.6". --- Can I make a LAN-to-LAN pptp vpn when the address of the other side is not known ahead of time? (e.g., the client has a dialup connection.) --- Has anyone connected LAN-to-LAN pptp vpn where the other side is a Windows box? We don't have the time or resources to build freebsd boxes and send them to other offices/clients. (In fact we have no IT staff at all, I'm just a programmer who knows freebsd and wanted vpn.) And, sigh, less enlightened clients are uncomfortable with trying freebsd... --- It would be nice to have a way to specify n number of clients without cutting and pasting entries in mpd.conf and mpd.links n times. Maybe a template mechanism? --- does anyone write firewall rules for ng0, ng1, etc? --- The mpd manual is a little daunting; is there a hand-holding / getting started guide to mpd available? --- Archie Cobbs really did some nice work here. Thanks Archie. On a personal note, I found freebsd/mpd with ipfilter/ipnat as the most elegant set of tools available for this sort of thing. While a firewall is not directly related to pptp/vpn/mpd, they do need to interact, and ipfilter was particularly nice for this. I can pretend to have an authoritative opinion because I did try many other tools: linux/poptop, freebsd/poptop, Windows 2000/vpn (it goes without saying that Windows tools are undesirable), linux/ipchains, linux/netfilter, freebsd/ipfw (with all due respect to the ipfw authors). freebsd/mpd/ipfilter/ipnat was just beautiful in the end. Regards, Jeff ------------------------------------------------------------------- p.s.: When searching the archives for answers to various problems I'm always grateful to find someone who "spelled it out." It makes it much easier to see what's causing the problem when there are examples available for comparison. So here is my example. Freebsd firewall running ipfilter/ipnat: internal interface xl0 192.168.1.1 external interface xl1 1.2.3.4 This firewall is also the machine running mpd. I could just as well run mpd on a different machine on the internal network, and I'll probably do so when another machine is available. The "rdr" rules in ipnat.rules would go to that machine instead of 192.168.1.1. All incoming packets are blocked except for (1) SYN packets on the two vpn ports (2) packets from established vpn connections (3) packets from established inside-initiated connections For more security one would filter on both interfaces and add anti-spoofing rules (and other rules I'm sure), but this suffices as a starting point and shows rules needed for vpn. ------------------------------------------------------------------- file: ipf.rules ------------------------------------------------------------------- ############################################# # external ############################################# # kill stupid netbios both ways right off the bat block out quick on xl1 from any to 1.2.3.4/27 port = 137 block out quick on xl1 from any to 1.2.3.4/27 port = 138 block in quick on xl1 from any to 1.2.3.4/27 port = 137 block in quick on xl1 from any to 1.2.3.4/27 port = 138 # outgoing # pass out tcp/udp/icmp and keep state pass out quick on xl1 proto tcp from any to 1.2.3.4/27 keep state pass out quick on xl1 proto udp from any to 1.2.3.4/27 keep state pass out quick on xl1 proto icmp from any to 1.2.3.4/27 keep state # pass out some unusual protocols needed for vpn pass out quick on xl1 from any to 1.2.3.4/27 # incoming # vpn ports: listen for SYN and keep state pass in quick on xl1 proto tcp from any to 1.2.3.4/27 port = 47 flags S keep state pass in quick on xl1 proto tcp from any to 1.2.3.4/27 port = 1723 flags S keep state # block in everything else block in quick on xl1 from any to 1.2.3.4/27 ############################################# # internal ############################################# # allow everything in and out pass in quick on xl0 pass out quick on xl0 ############################################# # loopback ############################################# # allow everything in and out pass in quick on lo0 pass out quick on lo0 ------------------------------------------------------------------- file: ipnat.rules ------------------------------------------------------------------- ############################################# # outside --> inside ############################################# # vpn redirect ports rdr xl1 1.2.3.4/32 port 1723 -> 192.168.1.1 port 1723 rdr xl1 1.2.3.4/32 port 47 -> 192.168.1.1 port 47 ############################################# # inside --> outside ############################################# # ftp proxy for stupid internet explorer map xl1 192.168.1.0/24 -> 1.2.3.4/32 proxy port 21 ftp/tcp # map with portmap map xl1 192.168.1.0/24 -> 1.2.3.4/32 portmap tcp/udp 1025:60000 # map everything else map xl1 192.168.1.0/24 -> 1.2.3.4/32 ------------------------------------------------------------------- file: mpd.conf ------------------------------------------------------------------- default: load client0 load client1 client0: new -i ng0 pptp0 pptp0 set iface disable on-demand set iface enable proxy-arp set iface idle 1800 set bundle disable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 60 set ipcp yes vjcomp set ipcp ranges 192.168.1.1/32 192.168.1.200/32 set ipcp dns 192.168.1.2 set ipcp nbns 192.168.1.2 set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless client1: new -i ng1 pptp1 pptp1 set iface disable on-demand set iface enable proxy-arp set iface idle 1800 set bundle disable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 60 set ipcp yes vjcomp set ipcp ranges 192.168.1.1/32 192.168.1.201/32 set ipcp dns 192.168.1.2 set ipcp nbns 192.168.1.2 set bundle enable compression set ccp yes mppc set ccp yes mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless ------------------------------------------------------------------- file: mpd.links ------------------------------------------------------------------- pptp0: set link type pptp set pptp self 192.168.1.1 set pptp enable incoming set pptp disable originate pptp1: set link type pptp set pptp self 192.168.1.1 set pptp enable incoming set pptp disable originate ------------------------------------------------------------------- file: mpd.secret ------------------------------------------------------------------- generic_client_username "some_password" __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 8:36:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 1F70F37B416 for ; Sat, 4 May 2002 08:36:20 -0700 (PDT) Received: from tim.dynofrog.com (dhcp065-031-025-171.insight.rr.com [65.31.25.171]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id g44Fa9P23872; Sat, 4 May 2002 11:36:10 -0400 (EDT) Subject: Re: exporting /home via SMB From: Tim Boring To: Ilia Chipitsine Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: multipart/alternative; boundary="=-I1qO7dd7vB1O1acYVPlo" X-Mailer: Evolution/1.0.1 Date: 04 May 2002 12:37:37 -0300 Message-Id: <1020526669.21538.16.camel@tim.dynofrog.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --=-I1qO7dd7vB1O1acYVPlo Content-Type: text/plain Content-Transfer-Encoding: 7bit On Sat, 2002-05-04 at 01:59, Ilia Chipitsine wrote: > > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > > anybody tried that ? > > > > What would be the point of that? You can set up the Samba config file > > the point of that would be setting a server which imports user database > using NIS+Kerberos, and home directories would be imported using > SMB. The server you're importing from...is it Unix or Windows? If it's a Unix machine, why not just use NFS instead of SMB? Or do you have a specific need to use SMB? Tim --=-I1qO7dd7vB1O1acYVPlo Content-Type: text/html; charset=utf-8 On Sat, 2002-05-04 at 01:59, Ilia Chipitsine wrote: 
> > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote:
> > > anybody tried that ?
> > 
> > What would be the point of that?  You can set up the Samba config file
> 
> the point of that would be setting a server which imports user database
> using NIS+Kerberos, and home directories would be imported using
> SMB.
The server you're importing from...is it Unix or Windows?  If it's a Unix machine, why not just use NFS instead of SMB?  Or do you have a specific need to use SMB?

Tim --=-I1qO7dd7vB1O1acYVPlo-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 8:45:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icc.cgu.chel.su (gw.csu.ru [195.54.14.5]) by hub.freebsd.org (Postfix) with ESMTP id 0417037B404 for ; Sat, 4 May 2002 08:45:27 -0700 (PDT) Received: from mail.cgu.chel.su (mail.cgu.chel.su [195.54.14.68]) by icc.cgu.chel.su (8.11.6/8.11.6) with ESMTP id g44FjGd89035 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sat, 4 May 2002 21:45:16 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from mail.cgu.chel.su (localhost [127.0.0.1]) by mail.cgu.chel.su (8.12.3/8.11.2) with ESMTP id g44FjGvr073842 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sat, 4 May 2002 21:45:16 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: (from uucp@localhost) by mail.cgu.chel.su (8.12.3/8.12.3/Submit) with UUCP id g44FjFwH073841; Sat, 4 May 2002 21:45:15 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from localhost (localhost.cgu.chel.su [127.0.0.1]) by jane.poka.net (8.12.3/8.11.1) with ESMTP id g44FhbVv000500; Sat, 4 May 2002 21:43:37 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Date: Sat, 4 May 2002 21:43:37 +0600 (YEKST) From: Ilia Chipitsine X-Sender: ilia@jane.poka.net To: Tim Boring Cc: questions@FreeBSD.ORG Subject: Re: exporting /home via SMB In-Reply-To: <1020526669.21538.16.camel@tim.dynofrog.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Salut, Tim Boring ! On 4 May 2002, Tim Boring wrote: > On Sat, 2002-05-04 at 01:59, Ilia Chipitsine wrote: > > > > On Sat, 2002-05-04 at 00:52, Ilia Chipitsine wrote: > > > > anybody tried that ? > > > > > > What would be the point of that? You can set up the Samba config file > > > > the point of that would be setting a server which imports user database > > using NIS+Kerberos, and home directories would be imported using > > SMB. > > The server you're importing from...is it Unix or Windows? If it's a > Unix machine, why not just use NFS instead of SMB? Or do you have a > specific need to use SMB? NFS is piece of crap, it supports neither locking, nor quotas. on the other hand I already export [homes] via SMB. I just wanted that /home/someuser to be mounted at the time user logs in. It would be nice. Another advantage of SMB is that, I can export some directories with read/write permissions, some directories with read-only, an some directories I probably don't want to export. That machine has "/" on a single partition, so NFS makes me export "/" as read/write. I don't want that. > > Tim > Regards, (îÁÉÌÕÞÛÉÅ ÐÏÖÅÌÁÎÉÑ) Ilia Chipitsine (éÌØÑ ûÉÐÉÃÉÎ) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 8:49:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp08.wxs.nl (smtp08.wxs.nl [195.121.6.40]) by hub.freebsd.org (Postfix) with ESMTP id 3194C37B400 for ; Sat, 4 May 2002 08:49:04 -0700 (PDT) Received: from yokozuna.bsd ([213.10.35.60]) by smtp08.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVLFXQ02.Z4B for ; Sat, 4 May 2002 17:49:02 +0200 Date: Sat, 4 May 2002 17:47:55 +0200 (CEST) From: Marco Beishuizen Reply-To: Marco Beishuizen To: FreeBSD questions mailing list Subject: Re: [partly solved] printing via a JetDirect 600N printserver In-Reply-To: <20020504142014.E299-100000@yokozuna.bsd> Message-ID: <20020504173420.I299-100000@yokozuna.bsd> FreeBSD: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, the wise Marco Beishuizen spoke, and said: > On Sat, 4 May 2002, the wise Chris Hill spoke, and said: > > > On Sat, 4 May 2002, Marco Beishuizen wrote: > > > > > [...] I installed a JetDirect 600N on my HP laserjet 2100, and I'm > > > using apsfilter to install the printer. > > > > > > Well, my question is how to print... Apsfilter needs to know about the > > > IP adress and hostname of the printer. How do I know what the hostname > > > and the IP adress of the JetDirect are? > > > > Don't know anything about apsfilter, but I have two printers with > > JetDirect interfaces. In both cases, you can set the IP address from the > > printer's front panel. Look for a menu that says something about "MIO > > configure", and then "IP address" under that. Once you've set that, you > > can telnet to the printer and set up the rest. The newer HP printers > > have an embedded web server, and you can just point a browser to the > > printer's IP and configure away using their GUI. > > It's a LaserJet 2100, and initially it didn't have a printserver in > it. The printer doesn't have a panel with a menu. So my problem now is > that if I want to know what the IP adress is I need to telnet to the > printserver, but for telnetting I need to know the IP adress. > > The only "adresses" I can find, are on the JetDirect itself: > TR: 000C83B1D029 > AD: 0030C18D0B94 > > Is it possible to configure it with this info? > > > The hostname is whatever you say it is - put an entry in /etc/hosts to > > match the IP address you set on the printer. > > > > HTH. > > > > -- > > Chris Hill chris@monochrome.org > > ** [ Busy Expunging <|> ] > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > Marco Hi, Thanks for the help so far. I partly solved my printing problem by attaching a windows laptop to my network. On the laptop I installed the software and I was able to connect to the printserver with a browser. The printer got IP address 10.0.0.152, and with windows printing is ok. I'm able to ping to the printer. My problem is parly solved because I still can't print from FreeBSD. I'm still trying to configure the printer with apsfilter, but when I try to print a test page I got the message "unknown printer". Marco -- The man who sets out to carry a cat by its tail learns something that will always be useful and which never will grow dim or doubtful. -- Mark Twain. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9: 3:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id DF25B37B417 for ; Sat, 4 May 2002 09:03:54 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g44G3suF075942; Sat, 4 May 2002 10:03:54 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g44G3s4r075939; Sat, 4 May 2002 10:03:54 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Sat, 4 May 2002 10:03:54 -0600 (MDT) From: Warren Block To: Marco Beishuizen Cc: FreeBSD questions mailing list Subject: Re: [partly solved] printing via a JetDirect 600N printserver In-Reply-To: <20020504173420.I299-100000@yokozuna.bsd> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, Marco Beishuizen wrote: > The printer got IP address 10.0.0.152, and with windows printing is > ok. I'm able to ping to the printer. > My problem is parly solved because I still can't print from FreeBSD. > I'm still trying to configure the printer with apsfilter, but when I > try to print a test page I got the message "unknown printer". More details are needed. What command line are you using? What is in /etc/printcap? -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9: 7:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 29ABD37B419 for ; Sat, 4 May 2002 09:07:40 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 5133649AB2; Sat, 4 May 2002 18:07:42 +0200 (CEST) Date: Sat, 4 May 2002 18:07:42 +0200 From: Axel Scheepers To: johann@broadpark.no Cc: questions@freebsd.org Subject: Re: mount server:/var/mail /var/mail Message-ID: <20020504180742.B13115@mars.thuis> Reply-To: Axel Scheepers References: <1020511875.3cd3c683ae894@mail.broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1020511875.3cd3c683ae894@mail.broadpark.no>; from johann@broadpark.no on Sat, May 04, 2002 at 01:31:15PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 01:31:15PM +0200, johann@broadpark.no wrote: > Hi. > > I'm running Postfix on my gateway, and I've found out the best way to access > my workstation's e-mail was through NFS. I've mounted /var/mail. > > What I'm curious about is what happens when my workstation recieves mail from > localhost, since /var/mail is exported by the gateway, I'm sensing some sort > of conflict. Hi, Postfix will want to write in /var/mail indeed, but won't garbage the files if it can write to them; you'll just get a mixed inbox if you use it this way. How about setting up IMAP or POP3 on the server. and let your favorite mailclient connect to it? I usually like to log in with ssh, and start mutt localy on my mail server, but pop3 is running for my sister who uses Outlook for mail. > > Also if I want my workstation to do my gateway's makeworld, wouldn't I have to > turn everything around and export from my workstation? I do that too for my old 486/16MB gateway, I just started 'make buildworld' on my workstation and exported /usr/obj to the gateway. On the gateway I mounted it on /usr/obj and started 'make installworld' (In fact, the src dir was also a nfs share) which was fast, since it didn't need to compile everything nomore, but just had to link the objects together. > > -- Johann > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ The only thing to do with good advice is pass it on. It is never any use to oneself. -- Oscar Wilde ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:14:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from 100m.mpr200-1.esr.lvcm.net (100m.mpr200-1.esr.lvcm.net [24.234.0.78]) by hub.freebsd.org (Postfix) with ESMTP id BD20F37B417 for ; Sat, 4 May 2002 09:14:49 -0700 (PDT) Received: from lymond.lvcablemodem.com (cm032.131.234.24.lvcm.com [24.234.131.32]) by 100m.mpr200-1.esr.lvcm.net (Mirapoint Messaging Server MOS 2.9.3.2) with ESMTP id AEI86511; Sat, 4 May 2002 09:14:35 -0700 (PDT) Received: (from dlm@localhost) by lymond.lvcablemodem.com (8.11.6/8.11.4) id g44GEYS48156 for freebsd-questions@FreeBSD.ORG; Sat, 4 May 2002 09:14:34 -0700 (PDT) Date: Sat, 4 May 2002 09:14:34 -0700 From: Dale Morris To: freebsd-questions@FreeBSD.ORG Subject: Java Install Message-ID: <20020504091434.A48113@well.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Can someone give me some pointers on how to get a working build of java? I went to the port /usr/ports/java/jdk12-beta ran [make install && make clean] nothing happened. Ran make and I got the message to download tar.gz files from Sun and the patches, then move the files to the /ports/distfiles directory, then run [make] which I did. All went well, no errors. Now I seem to have Java installed in the port. Won't that be overwritten next time the ports collection is upgraded? Also I don't seem to have java working, when I go to the website http://www.bushwatch.org/, mozilla stills trys to install the java plugin. Same with the BBC news website. What am I doing wrong here? thanks dale To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:19: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 3CCAC37B41A for ; Sat, 4 May 2002 09:19:04 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id E1E0449AB2; Sat, 4 May 2002 18:19:06 +0200 (CEST) Date: Sat, 4 May 2002 18:19:06 +0200 From: Axel Scheepers To: sunil khandelwal Cc: freebsd-questions@FreeBSD.ORG Subject: Re: leased line connection Message-ID: <20020504181906.C13115@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.2.5i In-Reply-To: ; from khandelwalsunil@hotmail.com on Sat, May 04, 2002 at 11:00:49AM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 11:00:49AM +0000, sunil khandelwal wrote: > Dear Sirs, > > I was using a leased line connection through Windows2000 but and there it is > simple. I have installed FreeBSD but after trying many times I am not able > to install the connection. I have gone through your PPP How to but still > unable to do any thing. Can you be kind enough to help me with this. Hi, A leased line ussually needs some changes to the defaults, since the line is always 'open'. It looks a bit like a nullmodem connection between 2 hosts. My guess is to strip the following commands from /etc/ppp/options: crtscts modem (passive) (not sure) Your modem might also require an init string to set it to leased line mode, if so, you'll need to change your dial script to set it to the mode. I never did this myself, so some configuration files and the output of the commands you use are appreciated :) > > Thanks. > > Sunil. > > _________________________________________________________________ > Join the world’s largest e-mail service with MSN Hotmail. > http://www.hotmail.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr,` -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Menu, n.: A list of dishes which the restaurant has just run out of. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:24:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 8472337B419 for ; Sat, 4 May 2002 09:24:36 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 73B9D49AB2; Sat, 4 May 2002 18:24:39 +0200 (CEST) Date: Sat, 4 May 2002 18:24:39 +0200 From: Axel Scheepers To: Evgeny Cc: questions@FreeBSD.org Subject: Re: FreeBSD sound configuration Message-ID: <20020504182439.D13115@mars.thuis> Reply-To: Axel Scheepers References: <19431.020504@mail.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <19431.020504@mail.ru>; from wmdenhome@mail.ru on Sat, May 04, 2002 at 10:21:06AM +0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 10:21:06AM +0400, Evgeny wrote: > Hello FreeBSD-masters > > I have AC'97 codec on SOLTEK 75KAV-X motherboard. > I recompiled the kernel with > > device pcm > > in configuration file. > When I run > #cat /dev/sndstat > it prints no errors: > port ... > After that next my step: > #cd /dev > #MAKEDEV snd0 > #MAKEDEV snd1 > It prints no errors too but sound does not work. > When I run artsd it prints: > 'Device not configured' > > What can I do ? > > Thanks, > Best regards, > Evgeny mailto:wmdenhome@mail.ru > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Hi, I don't have the card, but you might try the following: dmesg | grep pcm This should show you a line like: pcmX: model information You should then use sh MAKEDEV sndX which should give no errors. It might be that the number differs from 0 and 1, hence the error device not configured. It means it can't find the device at sndX. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Hand, n.: A singular instrument worn at the end of a human arm and commonly thrust into somebody's pocket. -- Ambrose Bierce, "The Devil's Dictionary" ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:28:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lakemtao06.cox.net (lakemtao06.cox.net [68.1.17.115]) by hub.freebsd.org (Postfix) with ESMTP id C771C37B41D for ; Sat, 4 May 2002 09:28:45 -0700 (PDT) Received: from outpost23 ([68.0.112.106]) by lakemtao06.cox.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020504162845.DWQJ8234.lakemtao06.cox.net@outpost23> for ; Sat, 4 May 2002 12:28:45 -0400 From: "Ted Goodridge, Jr" To: Subject: unsubscribe Date: Sat, 4 May 2002 11:33:01 -0500 Message-ID: <000c01c1f389$5ef94c70$6a700044@outpost23> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG unsubscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:31:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web10004.mail.yahoo.com (web10004.mail.yahoo.com [216.136.130.40]) by hub.freebsd.org (Postfix) with SMTP id C6EC737B41A for ; Sat, 4 May 2002 09:30:59 -0700 (PDT) Message-ID: <20020504163059.42193.qmail@web10004.mail.yahoo.com> Received: from [193.227.168.5] by web10004.mail.yahoo.com via HTTP; Sat, 04 May 2002 09:30:59 PDT Date: Sat, 4 May 2002 09:30:59 -0700 (PDT) From: Walid Nehme Subject: linux base on freebsd To: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear sirs. i usually send u email for help but not getting much informations. So i'm a beginner u can say and when answering my mail instruct my with all detail information u can provide. and a very thank for the replyer and welling to pay for it if u need. 1- the question is i need to install a penta@net driver on a freebsd 4.3 box why? because i want to use that download satellite on freebsd not on windows nt, as i have it now and having a lot of problems with it. the address for penta is : http://www.pentamedia.com/english/supports/technical-netfile.htm and there they provide driver for many versions of linux. so what version of linux freebsd supports? and which one of these drivers can i use? 2- how to install that driver, in freebsd file structure or in linux file structure that freebsd has ? 3- and plz one more time i ask u to provide me with all the details u have to accomplish this task fullfuly. explain to me as explaining to an ideot, because i dont know freebsd good as expert, and dont know linux at all. 4- i learned free from the first and not willing to learn linux, or use it to control my download satellite ===== Regards. Walid Nehme ICQ:5855336 MSN:nastylid@hotmail.com my homepage http://gayana.kharkov.com/Start.html __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 9:43:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 014DC37B416 for ; Sat, 4 May 2002 09:43:28 -0700 (PDT) Received: from yokozuna.bsd ([213.10.35.60]) by smtp04.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GVLIGD01.0YO; Sat, 4 May 2002 18:43:25 +0200 Date: Sat, 4 May 2002 18:42:18 +0200 (CEST) From: Marco Beishuizen Reply-To: Marco Beishuizen To: Warren Block Cc: FreeBSD questions mailing list Subject: Re: [partly solved] printing via a JetDirect 600N printserver In-Reply-To: Message-ID: <20020504181106.E299-200000@yokozuna.bsd> FreeBSD: MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1251246680-1020530538=:299" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-1251246680-1020530538=:299 Content-Type: TEXT/PLAIN; charset=US-ASCII On Sat, 4 May 2002, the wise Warren Block spoke, and said: > On Sat, 4 May 2002, Marco Beishuizen wrote: > > > The printer got IP address 10.0.0.152, and with windows printing is > > ok. I'm able to ping to the printer. > > > My problem is parly solved because I still can't print from FreeBSD. > > I'm still trying to configure the printer with apsfilter, but when I > > try to print a test page I got the message "unknown printer". > > More details are needed. What command line are you using? What is in > /etc/printcap? I'm not using a specific command line but the apsfilter script in an xterm. In this script you can select some options like the driver and resolution etc. and at the end it generates a printcap file. The only thing I need to change is the setup of the interface, which changes from parallel to network. When I do this I have to enter the IP address (10.0.0.152) and the printer name (raw). The script also provides the option to print a test page, it does this with: gs -q -dBATCH -dNOPAUSE -dSAFER -r600x600 -sDEVICE=lj5gray -sPAPERSIZE=a4 -sOutputFile='/tmp/apsfilter5808/test_page.aps' setup/test.ps The error message is: -rw-r--r-- 1 root wheel 5518752 May 4 18:23 /tmp/apsfilter5808/test_page.aps lpr: raw@10.0.0.152: unknown printer When I change hostname or printername it doesn't have any effect. My printcap at this moment is the same as the original one that comes with FreeBSD, with all lines marked out, because apsfilter has not generated a new printcap yet. I have attached the printcap file that is generated when I do install it with the not working settings. > -Warren Block * Rapid City, South Dakota USA > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Marco -- Second Law of Business Meetings: If there are two possible ways to spell a person's name, you will pick the wrong one. Corollary: If there is only one way to spell a name, you will spell it wrong, anyway. --0-1251246680-1020530538=:299 Content-Type: TEXT/PLAIN; charset=US-ASCII; name=printcap Content-Transfer-Encoding: BASE64 Content-ID: <20020504184218.T299@yokozuna.bsd> Content-Description: Content-Disposition: attachment; filename=printcap IwlAKCMpcHJpbnRjYXAJNS4zIChCZXJrZWxleSkgNi8zMC85MA0KIyAkRnJl ZUJTRDogc3JjL2V0Yy9wcmludGNhcCx2IDEuMTAuMi4xIDIwMDEvMDMvMDYg MDI6MDQ6NTIgb2JyaWVuIEV4cCAkDQoNCiMNCiMgVGhpcyBlbmFibGVzIGEg c2ltcGxlIGxvY2FsICJyYXciIHByaW50ZXIsIGhvb2tlZCB1cCB0byB0aGUg Zmlyc3QNCiMgcGFyYWxsZWwgcG9ydC4gIE5vIGtpbmQgb2YgZmlsdGVyaW5n IGlzIGRvbmUsIHNvIGV2ZXJ5dGhpbmcgeW91IHBhc3MNCiMgdG8gdGhlICJs cHIiIGNvbW1hbmQgd2lsbCBiZSBwcmludGVkIHVubW9kaWZpZWQuDQojDQoj IFJlbWVtYmVyLCBmb3IgZnVydGhlciBwcmludCBxdWV1ZXMgeW91J3JlIGdv aW5nIHRvIGFkZCwgeW91IGhhdmUNCiMgdG8gY2hvb3NlIGRpZmZlcmVudCBz cG9vbCBkaXJlY3RvcmllcyAodGhlICJzZCIgY2FwYWJpbGl0eSBiZWxvdyks DQojIG90aGVyd2lzZSB5b3Ugd2lsbCBncmVhdGx5IGNvbmZ1c2UgbHBkLg0K Iw0KIyBGb3Igc29tZSBhZHZhbmNlZCBwcmludGluZywgaGF2ZSBhIGxvb2sg YXQgdGhlICJhcHNmaWx0ZXIiIHBhY2thZ2UuDQojIEl0IHBsdWdzIGludG8g dGhlIGxwZCBzeXN0ZW0sIGFsbG93aW5nIHlvdSB0byBwcmludCBhIHZhcmll dHkgb2YNCiMgZGlmZmVyZW50IGZpbGUgdHlwZXMgYnkgY29udmVydGluZyBl dmVyeXRoaW5nIHRvIFBvc3RTY3JpcHQodG0pDQojIGZvcm1hdC4gIEZvciBt b3JlIGluZm9ybWF0aW9uIGFib3V0IGFwc2ZpbHRlciB2aXNpdA0KIw0KIwkg ICAgIGh0dHA6Ly93d3cuYXBzZmlsdGVyLm9yZy8NCiMNCiMgSWYgeW91IGRv bid0IGhhdmUgYSBQb3N0U2NyaXB0KHRtKSBwcmludGVyLCBkb24ndCBwYW5p YywgYnV0IGRvDQojIGFsc28gaW5zdGFsbCB0aGUgbGF0ZXN0ICJnaG9zdHNj cmlwdCIgcGFja2FnZSBmb3IgYmVzdCBwcmludGVyIHN1cHBvcnQuDQojDQoj IERvIGFsc28gcmVmZXIgdG8gdGhlICJwcmludGluZyIgc2VjdGlvbiBvZiB0 aGUgaGFuZGJvb2suICANCiMNCiMJaHR0cDovL3d3dy5mcmVlYnNkLm9yZy9o YW5kYm9vay9wcmludGluZy5odG1sDQojDQojIEEgbG9jYWwgY29weSBjYW4g YmUgZm91bmQgdW5kZXINCiMNCiMJL3Vzci9zaGFyZS9kb2MvaGFuZGJvb2sv aGFuZGJvb2sue2h0bWwsbGF0aW4xfS4NCiMNCiMgQmFubmVyIHBhZ2VzIGFy ZSBub3cgc3VwcHJlc3NlZCBieSBkZWZhdWx0LiAgUmVtb3ZlIHRoZSA6c2g6 IGNhcGFiaWxpdHkNCiMgdG8gdHVybiB0aGVtIGJhY2sgb24uDQojDQojbHB8 bG9jYWwgbGluZSBwcmludGVyOlwNCiMJOnNoOlwNCiMJOmxwPS9kZXYvbHB0 MDpzZD0vdmFyL3Nwb29sL291dHB1dC9scGQ6bGY9L3Zhci9sb2cvbHBkLWVy cnM6DQojDQojIFNhbXBsZSByZW1vdGUgcHJpbnRlci4gIFRoZSBwaHlzaWNh bCBwcmludGVyIGlzIG9uIG1hY2hpbmUgImxwaG9zdCIuDQojIFlvdSBjYW4g cGVyZm9ybSBhbnkga2luZCBvZiBsb2NhbCBmaWx0ZXJpbmcgZGlyZWN0bHku ICBJZiB5b3UgbmVlZA0KIyBsb2NhbCBmaWx0ZXJzIChlLmcuIExGIC0+IENS LUxGIGNvbnZlcnNpb24gZm9yIEhQIHByaW50ZXJzKSwgY3JlYXRlDQojIGEg ZmlsdGVyIHNjcmlwdCB0aGF0IHNlbmRzIHRoZSBwcm9wZXIgZXNjYXBlIHNl cXVlbmNlIHRvIHRoZSBwcmludGVyDQojIGFuZCB0aGVuIGNvbmNhdGVuYXRl cyBzdGRpbiB0byBzdGRvdXQuDQojDQojcmVtb3RlfHNhbXBsZSByZW1vdGUg cHJpbnRlcjpcDQojCTpzaDpcDQojCTpybT1scGhvc3Q6c2Q9L3Zhci9zcG9v bC9vdXRwdXQvbHBob3N0OmxmPS92YXIvbG9nL2xwZC1lcnJzOlwNCiMJOmlm PS91c3IvbG9jYWwvbGliZXhlYy9pZi1zY3JpcHQ6DQojDQojIFNpbXBsZSBS dXNzaWFuIHByaW50ZXIgd2l0aCBoYXJkd2FyZSBDUDg2NiBjaGFyYWN0ZXIg c2V0LCBvdXRwdXQgZmlsdGVyDQojIHVzZWQgZm9yIEtPSTgtUiAtPiBDUDg2 NiBjb252ZXJzaW9uDQojDQojbHB8UnVzc2lhbiBsb2NhbCBsaW5lIHByaW50 ZXI6XA0KIwk6c2g6b2Y9L3Vzci9saWJleGVjL2xwci9ydS9rb2kyYWx0OlwN CiMJOmxwPS9kZXYvbHB0MDpzZD0vdmFyL3Nwb29sL291dHB1dC9scGQ6bGY9 L3Zhci9sb2cvbHBkLWVycnM6DQojIEFQUzFfQkVHSU46cHJpbnRlcjENCiMg LSBkb24ndCBkZWxldGUgc3RhcnQgbGFiZWwgZm9yIGFwc2ZpbHRlciBwcmlu dGVyMQ0KIyAtIG5vIG90aGVyIHByaW50ZXIgZGVmaW5lcyBiZXR3ZWVuIEJF R0lOIGFuZCBFTkQgTEFCRUwNCmxwfGxqNWdyYXk7cj02MDB4NjAwO3E9aGln aDtjPWdyYXk7cD1hNDttPWF1dG86XA0KICAgIDpscD06XA0KICAgIDpybT06 XA0KICAgIDpycD1yYXc6XA0KICAgIDppZj0vdXNyL2xvY2FsL2V0Yy9hcHNm aWx0ZXIvYmFzZWRpci9iaW4vYXBzZmlsdGVyOlwNCiAgICA6c2Q9L3Zhci9z cG9vbC9scGQvbHA6XA0KICAgIDpsZj0vdmFyL3Nwb29sL2xwZC9scC9sb2c6 XA0KICAgIDphZj0vdmFyL3Nwb29sL2xwZC9scC9hY2N0OlwNCiAgICA6bXgj MDpcDQogICAgOnNoOg0KIyBBUFMxX0VORCAtIGRvbid0IGRlbGV0ZSB0aGlz DQo= --0-1251246680-1020530538=:299-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 10:33:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 7519337B4CF for ; Sat, 4 May 2002 10:32:08 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 70E6C49AB2; Sat, 4 May 2002 19:32:10 +0200 (CEST) Date: Sat, 4 May 2002 19:32:10 +0200 From: Axel Scheepers To: Richard Shea Cc: Roger 'Rocky' Vetterberg , FreeBSD Questions Subject: Re: getting amount of ram with sysctl Message-ID: <20020504193209.E13115@mars.thuis> Reply-To: Axel Scheepers References: <20020503020359.6C4C56DA62@fastmail.fm> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503020359.6C4C56DA62@fastmail.fm>; from richardshea@fastmail.fm on Fri, May 03, 2002 at 02:03:59AM +0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, This behaviour probably comes due to the fact the kernel memory is substracted from the real phys mem. The kernel's internal data structures also grow and shrink, so the value changes a bit in time. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Expert, n.: Someone who comes from out of town and shows slides. ------------------------------------------ On Fri, May 03, 2002 at 02:03:59AM +0000, Richard Shea wrote: > On Fri, 03 May 2002 03:17:37 +0200, "Roger 'Rocky' Vetterberg" > said: > > Richard Shea wrote: > > > > > Hi - Sorry I don't have an answer to your question but I would like to > > > do this myself and I don't know how (I don't know how to do it at all, > > > forget about accuracy !). > > > > > > I've looked at 'man sysctl' and I can't see the variables you have > > > mentioned - the nearest i've got is 'vm.loadavg'. > > > > > > Could you post the actual command you're using so that I could try it ? > > > > > > Sorry about not answering your question, I'm sure someone will ! > > > > > > regards > > > > > > richard shea. > > > > The commands are just 'sysctl vm.stats.vm.v_page_size' and > > 'sysctl vm.stats.vm.v_page_count'. > > > > Someone just told me about 'sysctl hw.physmem' which gives me a > > slightly more accurate value, but Im still missing a few megs. > > > Thanks very much. Just for the record I get > > sysctl vm.stats.vm.v_page_size = 4096 > sysctl vm.stats.vm.v_page_count = 7345 > > which comes out as : 30,085,120 > > and > > sysctl hw.physmem = 30,584,832 > > Which is quite a bit of difference. As far as I'm aware the box I'm > running these on is a '32 Mb machine' which to my way of thinking > should mean that : > > sysctl hw.physmem = 33,554,432 > > I'm sure there's stuff I don't know about this that would account for > some difference between '32 Mb machine' and they physmem but all the > same ~ 9% does seem quite a large discrepancy. > > Doubtless someone out there can explain this ... ? > > regards > > richard shea > > > > > -- > http://fastmail.fm - One of many happy users: > http://www.fastmail.fm/docs/quotes.html > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 10:39:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.foshan.gd.cn (smtp.foshan.gd.cn [202.103.160.25]) by hub.freebsd.org (Postfix) with ESMTP id A4C8F37B417 for ; Sat, 4 May 2002 10:39:23 -0700 (PDT) Received: from damei-xdz ([61.142.220.134]) by smtp.foshan.gd.cn (8.9.3/8.9.3) with SMTP id BAA13684; Sun, 5 May 2002 01:27:59 +0800 (CST) Message-Id: <200205041727.BAA13684@smtp.foshan.gd.cn> Date: Sun, 05 May 02 01:31:42 Öйú±ê׼ʱ¼ä From: "nhxdzw" Reply-To: "nhxdzw" To: ied@free.com Subject: ¹©ÇóÐÅÏ¢·¢²¼, Ãâ·Ñ! ²úƷͼÎÄ·¢²¼, Ãâ·Ñ! ÉÏ´«²úƷͼƬ×ÊÁÏ, Ãâ·Ñ!!! MIME-Version: 1.0 Content-type: multipart/related; boundary="----=_NextPart_000_0043_372CAC60.A5860521" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ------=_NextPart_000_0043_372CAC60.A5860521 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0044_372CAC60.A5860521" ------=_NextPart_001_0044_372CAC60.A5860521 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable ÕâÊÇÓó¬Îı¾¸ñʽ±àдµÄÓʼþ£¬ÇëʹÓó¬Îı¾·½Ê½ä¯ÀÀ¡£ ----------------------------------------------------------- ͨ¿ÆÓʼþȺ·¢Íõ£¬ËÙ¶ÈÆæ¿ì¡¢¹¦ÄÜÇ¿´ó£¬Ð§¹ûÒ»Á÷¡£ ÉÌÎñÓʼþËÑË÷Íõ£¬ÉÌÇéËÑË÷£¬ËѾ¡¿Í»§EMAILµØÖ·¡£ ͨ¿ÆÓʼþ¹ÜÀíÍõ£¬¸ßЧÓÅ»¯ÓʼþÁÐ±í¡£ Ãâ·ÑÏÂÔØ£ºhttp://tongke1.onchina.net »ò·¢EMAILË÷È¡£ºtongke228@sina.com ------=_NextPart_001_0044_372CAC60.A5860521 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable ------=_NextPart_001_0044_372CAC60.A5860521-- ------=_NextPart_000_0043_372CAC60.A5860521-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 10:42:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id C9CFA37B404 for ; Sat, 4 May 2002 10:42:26 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 9B95449AB2; Sat, 4 May 2002 19:42:29 +0200 (CEST) Date: Sat, 4 May 2002 19:42:29 +0200 From: Axel Scheepers To: Jeff Heath Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How do I shut off auto-negotiation on my NIC Message-ID: <20020504194229.F13115@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from jheath@scientificdevices.com on Fri, May 03, 2002 at 01:59:27PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 01:59:27PM -0400, Jeff Heath wrote: > I can work around my problem, but it's a nuisance, and I would like to know > the proper way to completely rid myself of auto-negotiation anyway. Hi, You can use the media option of ifconfig for this. See man ifconfig, and search for 'media' > > Thanks in advance for any suggestions. > > Jeff Heath > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ What this world needs is a good five-dollar plasma weapon. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 10:44:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id C880737B41B for ; Sat, 4 May 2002 10:44:14 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id E51EA49AB2; Sat, 4 May 2002 19:44:17 +0200 (CEST) Date: Sat, 4 May 2002 19:44:17 +0200 From: Axel Scheepers To: Jeff Heath Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How do I shut off auto-negotiation on my NIC Message-ID: <20020504194417.G13115@mars.thuis> Reply-To: Axel Scheepers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from jheath@scientificdevices.com on Fri, May 03, 2002 at 01:59:27PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG heh, keep forgetting things ;) you can save your new ifconfig command in /etc/rc.conf if you want, or add it to /etc/rc.local to keep them after a reboot. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ What this world needs is a good five-dollar plasma weapon. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 10:46:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 02B4037B404 for ; Sat, 4 May 2002 10:46:32 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 314D949AB2; Sat, 4 May 2002 19:46:35 +0200 (CEST) Date: Sat, 4 May 2002 19:46:35 +0200 From: Axel Scheepers To: "David C. Snyder" Cc: questions@freebsd.org Subject: Re: Installing without VGA or Keyboard Message-ID: <20020504194634.H13115@mars.thuis> Reply-To: Axel Scheepers References: <20020503154605.T10738-100000@dcs-vaio.turner.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020503154605.T10738-100000@dcs-vaio.turner.com>; from dsnyder@web.turner.com on Fri, May 03, 2002 at 03:55:27PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 03:55:27PM -0400, David C. Snyder wrote: > the CD. I'll try that next, but if you have any suggestions, I'd love > to hear them. Thanks. Hmm, turn the power on, hit space and blindly type boot -h ? > > David C. Snyder > CNN - Internet Technologies > Desk: 404 827 1679 Nextel ID: 46 > Cell: 770 616 0080 Pager: david_snyder@imcingular.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ Paradise is exactly like where you are right now ... only much, much better. -- Laurie Anderson ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 11:47:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ninja.amphex.com (ninja.amphex.com [217.13.29.51]) by hub.freebsd.org (Postfix) with ESMTP id 59EED37B417 for ; Sat, 4 May 2002 11:47:17 -0700 (PDT) Received: by ninja.amphex.com (Postfix, from userid 1000) id 357E113B; Sat, 4 May 2002 20:47:10 +0200 (CEST) Date: Sat, 4 May 2002 20:47:09 +0200 From: Johann Sharizan To: questions@freebsd.org Subject: Getting Opera to use linux_base-7 Message-ID: <20020504204709.A21786@ninja.amphex.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i X-Operating-System: FreeBSD ninja.amphex.com 4.5-STABLE i386 X-Accept-Language: en no my X-Location: Europe, Norway, Bergen Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello. I've been using Opera with linux_base-6 for quite some time now. Due to new challenges I am now forced to run linux_base-7, and was wondering if anybody knew how I could make Opera use it instead. Any suggestions are well appreciated. -- Johann Sharizan // [vgrep] | johann@ninja.amphex.com | System Administrator, Orbawire | Europe:Norway:Bergen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12: 4:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from clmboh1-smtp3.columbus.rr.com (clmboh1-smtp3.columbus.rr.com [65.24.0.112]) by hub.freebsd.org (Postfix) with ESMTP id 46B8637B400 for ; Sat, 4 May 2002 12:04:44 -0700 (PDT) Received: from tim.dynofrog.com (dhcp065-031-025-171.insight.rr.com [65.31.25.171]) by clmboh1-smtp3.columbus.rr.com (8.11.2/8.11.2) with ESMTP id g44J4eP08029; Sat, 4 May 2002 15:04:40 -0400 (EDT) Subject: Re: exporting /home via SMB From: Tim Boring To: Ilia Chipitsine Cc: questions@FreeBSD.ORG In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.1 Date: 04 May 2002 16:06:10 -0300 Message-Id: <1020539176.21538.46.camel@tim.dynofrog.com> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, Ilia! On Sat, 2002-05-04 at 12:43, Ilia Chipitsine wrote: > Salut, Tim Boring ! > > On 4 May 2002, Tim Boring wrote: > > > > The server you're importing from...is it Unix or Windows? If it's a > > Unix machine, why not just use NFS instead of SMB? Or do you have a > > specific need to use SMB? > > NFS is piece of crap, it supports neither locking, nor quotas. > on the other hand I already export [homes] via SMB. I just > wanted that /home/someuser to be mounted at the time user logs in. > It would be nice. Another advantage of SMB is that, I can export > some directories with read/write permissions, some directories > with read-only, an some directories I probably don't want to export. > That machine has "/" on a single partition, so NFS makes me export > "/" as read/write. I don't want that. Good points. So let me see if I understand this: 1. The user home directories are being exported from one server via SMB. 2. They are being imported on another server (but not mounted). 3. You want the user's imported home directory to be mounted when they log in. Is that a fair summary of what you would like to have happen? What if you try something like this: 1. Set up users with a temporary home directory (if this isn't already the case). 2. In each user's startup file (.profile, .bashrc, or whatever they're using), include a routine to check for the existence of /home/someuser. 3. If /home/someuser exists, then the login proceeds as normal. 4. If /home/someuser does not exist, then mount the directory with either smbmount or smbwrapper. 5. Once /home/someuser is mounted successfully, the user's shell cd's to that directory and proceed as normal. 6. If that won't work, then what about including something similar in a startup script that gets run during the bootup process? Then the system mounts all the home directories and they're available when the user logs in. I don't know if that will do exactly what you need, because I've not had a need to export/import between Unix boxes using SMB...I'm typically exporting from a unix box and mounting the shares on windows pcs. Another source that might be helpful is the comp.protocols.smb newsgroup. Good luck! Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12: 8:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from guinness.servers.plus.net (mx.last.plus.net [212.159.3.230]) by hub.freebsd.org (Postfix) with ESMTP id F36B437B400 for ; Sat, 4 May 2002 12:08:26 -0700 (PDT) Received: from [212.159.14.225] (helo=murphys.services.quay.plus.net) by guinness.servers.plus.net with smtp (Exim 3.16 #2) id 1744ad-0002Eg-00 for freebsd-questions@FreeBSD.ORG; Sat, 04 May 2002 19:49:03 +0100 Received: (qmail 7913 invoked from network); 4 May 2002 15:01:19 -0000 Received: from unknown (HELO Vegas) (212.56.117.78) by murphy.services.quay.plus.net with SMTP; 4 May 2002 15:01:19 -0000 From: "Mark Ackroyd" To: Subject: User Configuration help. Date: Sat, 4 May 2002 16:00:03 +0100 Message-ID: <001d01c1f37c$5fcae030$1700a8c0@Vegas> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hiya, I just installed freeBSD 4.5 over ftp, after downloading the 2 floppies and running them on a spare machine. I`am very impressed on how easy it was :-). I have machine up and running now but have a few things wrong that I don`t understand. 1) A created a "mark" user, so that I`m not logged in as root all the time. The machine is on an isolated lan so I`m not to worried about security, But I`d prefer not to be able to login over ssh straight into root. So I log in as mark and try to su up to root and I get this. "su: you are not in the correct group (wheel) to su root." How do I fix this? 2) /stand/sysinstall all of a sudden starting display the characters all screwy. I didn`t play with the fonts ( although I have now in an attempt to fix it ) the up and down arrow keys now exit the menus rather than more up and down the selection. It`s a bit odd.. I have to use the + and - keys on the numeric keypad to move up and down. What have I screwed here? Thanks... Mark Ackroyd mark@ackroyd.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:10: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail50.fg.online.no (mail50-s.fg.online.no [148.122.161.50]) by hub.freebsd.org (Postfix) with ESMTP id 29A6937B404 for ; Sat, 4 May 2002 12:09:55 -0700 (PDT) Received: from iceman (ti121210a080-0832.bb.online.no [80.212.3.64]) by mail50.fg.online.no (8.9.3/8.9.3) with SMTP id VAA19017 for ; Sat, 4 May 2002 21:09:48 +0200 (MET DST) Message-ID: <000c01c1955b$bbf14b80$0200a8c0@iceman> From: "Glenn Guillot" To: Subject: pppoe Date: Fri, 4 Jan 2002 21:09:32 +0100 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0009_01C19564.1ACF0E50" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0009_01C19564.1ACF0E50 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable hey im having some problems with my ppp to work i cant connect only get = the msg unrecognized option pty Glenn Guillot ------=_NextPart_000_0009_01C19564.1ACF0E50 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
hey im having some problems with my ppp = to work i=20 cant connect only get the msg
unrecognized option pty
 
Glenn = Guillot
------=_NextPart_000_0009_01C19564.1ACF0E50-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:22:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from prima.connect1.ca (prima.connect1.ca [216.138.233.232]) by hub.freebsd.org (Postfix) with ESMTP id E6F8A37B400 for ; Sat, 4 May 2002 12:22:22 -0700 (PDT) Received: from connect1.ca (localhost.connect1.ca [127.0.0.1]) by prima.connect1.ca (Postfix) with SMTP id F29BD64C01; Sat, 4 May 2002 15:22:37 -0400 (EDT) Received: from 216.254.135.133 (SquirrelMail authenticated user franka) by www.connect1.ca with HTTP; Sat, 4 May 2002 15:22:38 -0400 (EDT) Message-ID: <3425.216.254.135.133.1020540158.squirrel@www.connect1.ca> Date: Sat, 4 May 2002 15:22:38 -0400 (EDT) Subject: Re: User Configuration help. From: "BSD Questions" To: In-Reply-To: <001d01c1f37c$5fcae030$1700a8c0@Vegas> References: <001d01c1f37c$5fcae030$1700a8c0@Vegas> X-Priority: 3 Importance: Normal X-MSMail-Priority: Normal Cc: Reply-To: bsdquestions@connect1.ca X-Mailer: SquirrelMail (version 1.2.5) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What you want to do is add the mark user to the wheel group. To do this you have to login as root, and edit the /etc/group file. the top line should look something like this. wheel:*:0:root,mark When you save it, you will be able to su to root. A good way to check a users group priviledges is to use the id command. so at the prompt, you type bash#: id mark uid=2030(mark) gid=2030(mark) groups=2030(mark), 0(wheel) you should see some output like this, with the wheel group showing up. Hope this helps Frank Auciello > Hiya, > > I just installed freeBSD 4.5 over ftp, after downloading the 2 floppies > and running them on a spare machine. I`am very impressed on how easy it > was :-). I have machine up and running now but have a few things wrong > that I don`t understand. > > 1) A created a "mark" user, so that I`m not logged in as root all the > time. The machine is on an isolated lan so I`m not to worried about > security, But I`d prefer not to be able to login over ssh straight into > root. So I log in as mark and try to su up to root and I get this. > > "su: you are not in the correct group (wheel) to su root." > > How do I fix this? > > > 2) /stand/sysinstall all of a sudden starting display the characters > all screwy. I didn`t play with the fonts ( although I have now in an > attempt to fix it ) the up and down arrow keys now exit the menus > rather than more up and down the selection. It`s a bit odd.. I have to > use the + and - keys on the numeric keypad to move up and down. What > have I screwed here? > > Thanks... > > > Mark Ackroyd > mark@ackroyd.net > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:35:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from wonkity.com (wonkity.com [63.93.4.4]) by hub.freebsd.org (Postfix) with ESMTP id B90DD37B41B for ; Sat, 4 May 2002 12:35:44 -0700 (PDT) Received: from wonkity.com (localhost.wonkity.com [127.0.0.1]) by wonkity.com (8.12.1/8.11.6) with ESMTP id g44JZiuF076296; Sat, 4 May 2002 13:35:44 -0600 (MDT) (envelope-from wblock@wonkity.com) Received: from localhost (wblock@localhost) by wonkity.com (8.12.1/8.12.1/Submit) with ESMTP id g44JZhhH076293; Sat, 4 May 2002 13:35:43 -0600 (MDT)?g (envelope-from wblock@wonkity.com) Date: Sat, 4 May 2002 13:35:43 -0600 (MDT) From: Warren Block To: Marco Beishuizen Cc: FreeBSD questions mailing list Subject: Re: [partly solved] printing via a JetDirect 600N printserver In-Reply-To: <20020504181106.E299-200000@yokozuna.bsd> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 4 May 2002, Marco Beishuizen wrote: > The only thing I need to change is the setup of the interface, which > changes from parallel to network. When I do this I have to enter the > IP address (10.0.0.152) and the printer name (raw). The script also > provides the option to print a test page, it does this with: > > gs -q -dBATCH -dNOPAUSE -dSAFER -r600x600 -sDEVICE=lj5gray > -sPAPERSIZE=a4 -sOutputFile='/tmp/apsfilter5808/test_page.aps' > setup/test.ps > > The error message is: > > -rw-r--r-- 1 root wheel 5518752 May 4 18:23 > /tmp/apsfilter5808/test_page.aps > lpr: raw@10.0.0.152: unknown printer lpr won't work because the printcap entry isn't complete. Here's the entry that it looks to have generated, but note that "rm=" isn't filled in -- it should be the hostname or IP address of the printer: # APS1_BEGIN:printer1 # - don't delete start label for apsfilter printer1 # - no other printer defines between BEGIN and END LABEL lp|lj5gray;r=600x600;q=high;c=gray;p=a4;m=auto:\ :lp=:\ :rm=:\ :rp=raw:\ :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\ :sd=/var/spool/lpd/lp:\ :lf=/var/spool/lpd/lp/log:\ :af=/var/spool/lpd/lp/acct:\ :mx#0:\ :sh: # APS1_END - don't delete this So change the :rm=: line to: :rm=10.0.0.152:\ -Warren Block * Rapid City, South Dakota USA To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:46:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 0991437B404 for ; Sat, 4 May 2002 12:46:22 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id B24A449ABE; Sat, 4 May 2002 20:44:09 +0200 (CEST) Date: Sat, 4 May 2002 20:44:09 +0200 From: Axel Scheepers To: Marco Beishuizen Cc: Warren Block , FreeBSD questions mailing list Subject: Re: [partly solved] printing via a JetDirect 600N printserver Message-ID: <20020504204409.K13115@mars.thuis> Reply-To: Axel Scheepers References: <20020504181106.E299-200000@yokozuna.bsd> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020504181106.E299-200000@yokozuna.bsd>; from mbeis@wxs.nl on Sat, May 04, 2002 at 06:42:18PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 06:42:18PM +0200, Marco Beishuizen wrote: > lp|lj5gray;r=600x600;q=high;c=gray;p=a4;m=auto:\ > :lp=:\ > :rm=:\ Shouldn't this list your remote printer? See man printcap for details, for a fast try, add your JetDirects ip after rm= > :rp=raw:\ > :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\ > :sd=/var/spool/lpd/lp:\ > :lf=/var/spool/lpd/lp/log:\ > :af=/var/spool/lpd/lp/acct:\ > :mx#0:\ > :sh: > # APS1_END - don't delete this Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ All progress is based upon a universal innate desire on the part of every organism to live beyond its income. -- Samuel Butler ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:46:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 0C71F37B41A for ; Sat, 4 May 2002 12:46:22 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 3810149ABF; Sat, 4 May 2002 20:52:00 +0200 (CEST) Date: Sat, 4 May 2002 20:52:00 +0200 From: Axel Scheepers To: Walid Nehme Cc: freebsd-questions@FreeBSD.ORG Subject: Re: linux base on freebsd Message-ID: <20020504205159.L13115@mars.thuis> Reply-To: Axel Scheepers References: <20020504163059.42193.qmail@web10004.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020504163059.42193.qmail@web10004.mail.yahoo.com>; from walidn@yahoo.com on Sat, May 04, 2002 at 09:30:59AM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Walid, On Sat, May 04, 2002 at 09:30:59AM -0700, Walid Nehme wrote: > Dear sirs. > i usually send u email for help but not getting much > informations. I'm sorry to hear that. Just keep posting ;) > So i'm a beginner u can say and when answering my mail > instruct my with all detail information u can provide. > and a very thank for the replyer and welling to pay for it > if u need. > > 1- the question is i need to install a penta@net driver on > a freebsd 4.3 box why? because i want to use that download > satellite on freebsd not on windows nt, as i have it now > and having a lot of problems with it. > > the address for penta is : > http://www.pentamedia.com/english/supports/technical-netfile.htm > and there they provide driver for many versions of linux. > so what version of linux freebsd supports? and which one of > these drivers can i use? > > 2- how to install that driver, in freebsd file structure or > in linux file structure that freebsd has ? As far as I know. you can't run Linux drivers under FreeBSD. The emulation layer just maps the linux systemcalls to the freebsd ones, a kernel driver requires a bit more effort to work, it mostly means a rewrite to freebsd. > > 3- and plz one more time i ask u to provide me with all > the details u have to accomplish this task fullfuly. > explain to me as explaining to an ideot, because i dont > know freebsd good as expert, and dont know linux at all. That would be difficult, since you'd have to rewrite the driver for freebsd to make it work. There isn't exactly an easy way to do this, unless you've got experience writing such drivers. > > 4- i learned free from the first and not willing to learn > linux, or use it to control my download satellite Linux is quite similar to freebsd in overall use, so it isn't such a big step as you might think. Some things are surely different, but you can try it until someone ports the drivers or the producer provides them. > > ===== > Regards. > Walid Nehme > ICQ:5855336 > MSN:nastylid@hotmail.com > my homepage http://gayana.kharkov.com/Start.html > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ All progress is based upon a universal innate desire on the part of every organism to live beyond its income. -- Samuel Butler ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 12:51:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hyperreal.org (taz3.hyperreal.org [209.133.83.22]) by hub.freebsd.org (Postfix) with SMTP id 61EE337B405 for ; Sat, 4 May 2002 12:51:40 -0700 (PDT) Received: (qmail 9202 invoked by uid 1001); 4 May 2002 19:51:34 -0000 Message-ID: <20020504195134.9201.qmail@hyperreal.org> Subject: SOLVED Re: Djmy.domain not working after upgrade In-Reply-To: <20020430021759.77725.qmail@hyperreal.org> To: freebsd-questions@freebsd.org Date: Sat, 4 May 2002 12:51:34 -0700 (PDT) From: Mike Brown X-Whoa: whoa. X-Mailer: ELM [version 2.4ME+ PL92 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thanks to some nudgin from Per Hedeland on comp.mail.sendmail, I figured out the solution. Apparently $j is deprecated or ineffective now, and proper masquerading involves $M and some rule changes. The best way to set it is by editing a .mc file, not the .cf file. However, when I ran 'make installworld' and 'mergemaster', no .mc files were copied into /etc/mail. Only a new prefab .cf file appeared. I don't know if this indicates a failure on my part to run something correctly, or a failure in the upgrade process. I'm perfectly willing to admit it was a mistake I made! Anyway, the steps to solve the problem were as follows: cd /usr/src/etc/sendmail make make install (now /etc/mail has the base files) cd /etc/mail make (now there's a /etc/mail/myhost.mydomain.mc) edit myhost.mydomain.mc and add near the top: MASQUERADE_AS(mydomain) FEATURE(`masquerade_envelope') make install make restart - Mike ____________________________________________________________________________ mike j. brown | xml/xslt: http://skew.org/xml/ denver/boulder, colorado, usa | personal: http://hyperreal.org/~mike/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13: 0:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mailix.net (smtp.mailix.net [216.148.213.132]) by hub.freebsd.org (Postfix) with ESMTP id 2751837B423 for ; Sat, 4 May 2002 13:00:33 -0700 (PDT) Received: from [216.164.225.145] (helo=fritz) by smtp.mailix.net with asmtp (Exim 4.01) id 1745ho-0003Yj-00 for questions@freebsd.org; Sat, 04 May 2002 13:00:32 -0700 Message-ID: <000e01c1f3bf$a3d47f00$0301a8c0@uminafamily.com> From: "Christopher J. Umina" To: Subject: Compaq Proliant 4500 Date: Sat, 4 May 2002 16:01:34 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hey all, Just wondering if you can use any type of RAM other than Compaq RAM inside a Compaq Proliant 4500. Anybody have any experiance with these things? As soon as I get my RAM I'm gonna drop BSD onto it. Thanks, Christopher J. Umina To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13: 3: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 03EDD37B445 for ; Sat, 4 May 2002 13:03:01 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 48D7349ABD; Sat, 4 May 2002 20:40:40 +0200 (CEST) Date: Sat, 4 May 2002 20:40:40 +0200 From: Axel Scheepers To: Marco Beishuizen Cc: Chris Hill , FreeBSD questions mailing list Subject: Re: printing via a JetDirect 600N printserver Message-ID: <20020504204039.J13115@mars.thuis> Reply-To: Axel Scheepers References: <20020504142014.E299-100000@yokozuna.bsd> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020504142014.E299-100000@yokozuna.bsd>; from mbeis@wxs.nl on Sat, May 04, 2002 at 02:34:59PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, May 04, 2002 at 02:34:59PM +0200, Marco Beishuizen wrote: > The only "adresses" I can find, are on the JetDirect itself: > TR: 000C83B1D029 > AD: 0030C18D0B94 > > Is it possible to configure it with this info? > Hi, You can use 2 tools to get the ip from it, arp and tcpdump. The above addresses look like mac addresses, so an 'arp -a' should list them. Tcpdump can be used to monitor all packets that fly over your LAN, including broadcasts from your JetDirect. Try something like tcpdump -i Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ "Given the choice between accomplishing something and just lying around, I'd rather lie around. No contest." -- Eric Clapton ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13: 9:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from relay.mailbox.co.za (relay.mailbox.co.za [196.31.150.67]) by hub.freebsd.org (Postfix) with ESMTP id A608837B404 for ; Sat, 4 May 2002 13:08:56 -0700 (PDT) Received: from imail (iweb2 [192.168.0.12]) by relay.mailbox.co.za (8.11.2/8.11.2) with SMTP id g438YYl09214 for ; Fri, 3 May 2002 10:34:35 +0200 Message-Id: <200205030834.g438YYl09214@relay.mailbox.co.za> Date: Fri, 3 May 2002 10:34:35 +0200 From: "Pieter Duvenhage" To: freebsd-questions@FreeBSD.org X-Mailer: WebMail v2.52R9 X-Sender-Ip: 62.200.56.34 X-Account: 46005 MIME-Version: 1.0 Content-Type: text/plain Subject: Conexant Internal HSF Modem Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I've noticed that these modems work on Linux. Can I get mine to work on my FreeBSD running on my Notebook? _____________________________________________ lose weight now! http://www.slimandtrim.biz To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:19: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server2.highperformance.net (ip30.gte4.rb1.bel.nwlink.com [209.20.215.30]) by hub.freebsd.org (Postfix) with ESMTP id 57D0537B425 for ; Sat, 4 May 2002 13:18:57 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by server2.highperformance.net (8.12.3/8.12.3) with ESMTP id g44KIaxm084187 for ; Sat, 4 May 2002 13:18:46 -0700 (PDT) (envelope-from jcwells@highperformance.net) Date: Sat, 4 May 2002 13:18:36 -0700 (PDT) From: "Jason C. Wells" X-X-Sender: jcw@server2.highperformance.net To: FreeBSD-questions Subject: Double // Cause Problem ? Message-ID: <20020504131533.P84180-100000@server2.highperformance.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Will the '//' in the library paths here cause trouble? I do not suppose that they will. I am having a crappy time getting imap kerberized so I am suspicious of everything. # ldd /usr/local/lib/libc-client4.so /usr/local/lib/libc-client4.so: libpam.so.1 => /usr/lib/libpam.so.1 (0x281af000) ==> libgssapi_krb5.so => /usr/local/krb5/lib//libgssapi_krb5.so ==> libkrb5.so => /usr/local/krb5/lib//libkrb5.so (0x281ca000) ==> libk5crypto.so => /usr/local/krb5/lib//libk5crypto.so (0x2821f000) libcom_err.so => /usr/lib/libcom_err.so (0x2822f000) libcom_err.so => /usr/local/krb5/lib/libcom_err.so (0x28231000) Thanks, Jason C. Wells To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:35:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 20B5137B41F for ; Sat, 4 May 2002 13:35:08 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g44KbcC13477 for ; Sat, 4 May 2002 22:37:39 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g44KbbU13473 for ; Sat, 4 May 2002 22:37:38 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g44KZ5116873 for ; Sat, 4 May 2002 22:35:05 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g44KZ5M47281 for questions@FreeBSD.ORG; Sat, 4 May 2002 22:35:05 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Sat, 4 May 2002 22:35:05 +0200 From: Hanspeter Roth To: questions@FreeBSD.ORG Subject: Re: mounting linprocfs gives error Message-ID: <20020504223505.A47227@bsag.ch> Reply-To: questions@FreeBSD.ORG Mail-Followup-To: questions@FreeBSD.ORG References: <20020503111257.A3919@mail.clubplus.net> <20020503180233.A16817@bsag.ch> <20020503160632.A89782@mail.clubplus.net> <20020503224426.A39765@bsag.ch> <20020504032603.A8812@mail.clubplus.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020504032603.A8812@mail.clubplus.net>; from david@skytrackercanada.com on Sat, May 04, 2002 at 03:26:03AM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 04 at 03:26, David Banning spoke: > > It seems you have upgrade the kernel to 4.5Stable. > That's where I am too. > > > I don't know whether modules are impacted by the userland programs. > what's a 'userland' program? Userland programs are those that are not kernel nor kernel loaded modules. They have some code running in user mode but call systemcalls for specific tasks. These are in /bin, /usr/bin, /sbin but also the library calls of shared object libraries run in user mode. > > > Just curious: have you also made installworld? > Yes. Ok. Just to be sure this can't be the cause. > > Are there strange boot message near `additional ABI support:'? > > (ScrollLock PgUp) > No. > > > Does `ls /proc` look reasonable? > > su-2.03# ls /proc > 0/ 174/ 230/ 304/ 58/ > 1/ 2/ 231/ 306/ 6/ [...] > 16991/ 225/ 289/ 4/ curproc@ [...] > > No sure what reasonable is in this case. It looks reasonable. It's not empty. It seems all processes have a directory here. (I don't know whether linprocfs depends on procfs.) > > Is /compat/linux/proc a directory? > yes. > > > I have linux_base-6.1 port installed. > Me too. I can't think of another cause now. Sorry. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:35:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web14901.mail.yahoo.com (web14901.mail.yahoo.com [216.136.225.53]) by hub.freebsd.org (Postfix) with SMTP id 08ABE37B41C for ; Sat, 4 May 2002 13:35:50 -0700 (PDT) Message-ID: <20020504203549.16419.qmail@web14901.mail.yahoo.com> Received: from [217.131.175.181] by web14901.mail.yahoo.com via HTTP; Sat, 04 May 2002 13:35:49 PDT Date: Sat, 4 May 2002 13:35:49 -0700 (PDT) From: ozdemir dogan Subject: mouse problem under x To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi I have a problem with my mouse under X.I am using FreeBSD 4.5 on amd athlon 1400 and Nvidia Geforce2 MX400.Problem is Under X when I move the mouse it goes to right side and don't move any more.In xf86config I did mouse device /dev/sysmouse. What must I do? Thank you __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:36:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from axel.truedestiny.net (a185066.upc-a.chello.nl [62.163.185.66]) by hub.freebsd.org (Postfix) with ESMTP id 39A8437B41B for ; Sat, 4 May 2002 13:36:20 -0700 (PDT) Received: by axel.truedestiny.net (Postfix, from userid 1000) id 0DDB949AB2; Sat, 4 May 2002 20:31:30 +0200 (CEST) Date: Sat, 4 May 2002 20:31:29 +0200 From: Axel Scheepers To: Rob King Cc: freebsd-questions@freebsd.org Subject: Re: Possible bug in miibus, fxp, and xl? Message-ID: <20020504203129.I13115@mars.thuis> Reply-To: Axel Scheepers References: <3CD2E8D1.1040100@wholefoods.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3CD2E8D1.1040100@wholefoods.com>; from james.king@wholefoods.com on Fri, May 03, 2002 at 02:45:21PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Fri, May 03, 2002 at 02:45:21PM -0500, Rob King wrote: > Hey everyone, > Sorry if this has been answered elsewhere, but I'm not seeing > it...And thanks in advance for any help. > > I'm running 4.5-RELEASE, i386 on a Dell server box. The machine > keeps locking up whenever I do large network transfers. At first I > thought it was a problem with the on-motherboard ethernet card (xl0), > but when I put an fxp-driven card in, and removed kernel support for > xl0, it still locks up on large network transfers. > > This doesn't appear to be a cooling issue, but the only common piece > of code is the miibus driver code. Anyone have any ideas? > > Thanks a lot, > Rob > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Hi, I have in one of my home boxes a realtek card, which is mii based too. The box runs fBSD4.5 and does quite some traffic on an average day. All goes fine. Can you include a backtrace whenever the kernels hangs? We might get some more information on what it was doing when it crashed. Gr, -- Axel Scheepers UNIX System Administrator email: axel@axel.truedestiny.net a.scheepers@iae.nl http://axel.truedestiny.net/~axel ------------------------------------------ On-line, adj.: The idea that a human being should always be accessible to a computer. ------------------------------------------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:46:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns.bsag.ch (ns.bsag.ch [62.2.201.74]) by hub.freebsd.org (Postfix) with ESMTP id 63CE137B417 for ; Sat, 4 May 2002 13:46:22 -0700 (PDT) Received: from gw.bsag.ch (root@localhost) by ns.bsag.ch with ESMTP id g44KmqV13746 for ; Sat, 4 May 2002 22:48:52 +0200 (CEST) Received: from ns.bsag.ch (bs13.bsag.ch [192.168.1.13]) by gw.bsag.ch with ESMTP id g44KmqU13742 for ; Sat, 4 May 2002 22:48:52 +0200 (CEST) Received: from bsag.ch (bs82 [192.168.1.82]) by ns.bsag.ch (8.11.3/8.11.3/SuSE Linux 8.11.1-0.5) with ESMTP id g44KkL117108 for ; Sat, 4 May 2002 22:46:21 +0200 Received: (from hpr@localhost) by bsag.ch (8.11.6/8.11.6) id g44KkKU47404 for questions@FreeBSD.ORG; Sat, 4 May 2002 22:46:20 +0200 (CEST) (envelope-from hanspeter_roth@hotmail.com) Date: Sat, 4 May 2002 22:46:20 +0200 From: Hanspeter Roth To: questions@FreeBSD.ORG Subject: Re: mount server:/var/mail /var/mail Message-ID: <20020504224620.B47227@bsag.ch> Mail-Followup-To: questions@FreeBSD.ORG References: <1020511875.3cd3c683ae894@mail.broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1020511875.3cd3c683ae894@mail.broadpark.no>; from johann@broadpark.no on Sat, May 04, 2002 at 01:31:15PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On May 04 at 13:31, johann@broadpark.no spoke: > Hi. > > I'm running Postfix on my gateway, and I've found out the best way to access > my workstation's e-mail was through NFS. I've mounted /var/mail. > > What I'm curious about is what happens when my workstation recieves mail from > localhost, since /var/mail is exported by the gateway, I'm sensing some sort > of conflict. Make the MTA of your workstation forward all local mail to the mailhost. -Hanspeter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 13:48:52 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web14902.mail.yahoo.com (web14902.mail.yahoo.com [216.136.225.54]) by hub.freebsd.org (Postfix) with SMTP id 90C8837B417 for ; Sat, 4 May 2002 13:48:49 -0700 (PDT) Message-ID: <20020504204849.28432.qmail@web14902.mail.yahoo.com> Received: from [217.131.175.181] by web14902.mail.yahoo.com via HTTP; Sat, 04 May 2002 13:48:49 PDT Date: Sat, 4 May 2002 13:48:49 -0700 (PDT) From: ozdemir dogan Subject: Re: mouse problem under x (please don't answer problem solved by changing protocol to auto) To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- ozdemir dogan wrote: > Hi I have a problem with my mouse under X.I am > using FreeBSD 4.5 on amd athlon 1400 and Nvidia > Geforce2 MX400.Problem is Under X when I move the > mouse it goes to right side and don't move any > more.In > xf86config I did mouse device /dev/sysmouse. > What must I do? > Thank you > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 14:11:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from server11.safepages.com (server11.safepages.com [216.127.146.25]) by hub.freebsd.org (Postfix) with ESMTP id B0EB637B404 for ; Sat, 4 May 2002 14:11:57 -0700 (PDT) Received: from ecerejo.dns2go.com (0-1pool21-76.nas31.philadelphia1.pa.us.da.qwest.net [65.129.21.76]) by server11.safepages.com (Postfix) with ESMTP id 4040D14F434 for ; Sat, 4 May 2002 21:11:20 +0000 (GMT) Content-Type: text/plain; charset="us-ascii" From: "E. J. Cerejo" Reply-To: ecerejo@zapo.net To: freebsd-questions@FreeBSD.org Subject: Questions not showing up Date: Sat, 4 May 2002 17:11:24 -0400 X-Mailer: KMail [version 1.4] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <200205041711.24158.ecerejo@zapo.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG What's going on in here, I can't post a question with a copy of my rc.conf file and a copy of the ifconfig results! It won't go through using kmail and if I use a webmail it will send but it won't show up. Is something being blocked? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 14:25:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from saptechniques.com (adsl-66-72-195-14.dsl.clevoh.ameritech.net [66.72.195.14]) by hub.freebsd.org (Postfix) with SMTP id 7996137B400; Sat, 4 May 2002 14:25:37 -0700 (PDT) From: mail@saptechniques.com To: mail@saptechniques.com Subject: SAP R/3 Data Integration Message-Id: <20020504212537.7996137B400@hub.freebsd.org> Date: Sat, 4 May 2002 14:25:37 -0700 (PDT) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear SAP Professional: The new book 'SAP R/3 Data Integration Techniques Using ABAP/4 and Visual Basic' is now available. 'SAP Data Integration Techniques' is a comprehensive guide to SAP RFC programming. LOADED with fully tested source code (and internet support), the book provides real world examples of integrating HTML, XML, Access, Excel, Adobe Acrobat and more! A must for SAP analysts and programmers! For a limited time, 'SAP Data Integration Techniques' is available at introductory savings at http://www.mariansys.com or http://www.saptechniques.com Please visit us today! ______________________________________________________________________ Our mailings are highly selective and intended for the SAP community. If you have received this message in error, or if you wish to be removed from our mailings, please notify mail@saptechniques.com for immediate removal. Thank You. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 14:40:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mydomain.com (213-96-189-190.uc.nombres.ttd.es [213.96.189.190]) by hub.freebsd.org (Postfix) with SMTP id 20BDA37B41D for ; Sat, 4 May 2002 14:38:45 -0700 (PDT) From: "Important Message!" To: "Questions" Subject: Your Holiday Home web site is NOT being SEEN! Date: Sat, 4 May 2002 23:40:27 +0200 MIME-Version: 1.0 X-Priority: 1 X-MSMail-Priority: High Reply-To: "Important Message!" Organization: Regal X-Mailer: Internet Mail Service Content-Type: multipart/alternative; boundary="----_NextPart_3532120207" Message-Id: <20020504213845.20BDA37B41D@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------_NextPart_3532120207 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: QUOTED-PRINTABLE Your Holiday Home Web Site is NOT Being SEEN WHY? NO ONE CAN FIND IT! YOUR web site is NOT on many search engines and at the Bottom of their listings and as a result YOU are LOSING customers who cannot find you! Can this be changed? YES! Regal Telecom For ONLY =A379.97 We will submit your web site to over 350 of the worlds search engines. (see full list of Search Engines at the end of this document) We will submit your site with the most effective meta tags and keywords. (See our money back guarantee) We know what the search engines are looking for. How do we know? We look at the top five web sites in your category and use the same meta tags and key words that they use. If it works for them it will work for you! So YOUR web site can be FOUND and SEEN For Twelve Months! Guaranteed! (See our testimonials) Think about it! Just as you have a web designer to build your site and a company to host your site,does it not make sense to use a company that specializes in professionally submitting your web site. Getting your web site FOUND and SEEN! A Shocking Fact! Your web site designer and your host are NOT responsible for getting your web site seen! Yes, they may submit your site to a few search engines periodically but to stay on the TOP of the search engines is an aggressive business. Getting onto the search engines and at the top of their listings doesn't just happen. You have to be put there! What the.Net, The Internet Magazine 8/2000 said: "You have your web site designed and have sorted out the maintenance and waiting for the business to roll in, but there's one small problem.... No one knows!" You need a professional company to do it! Your Money Back Guarantee! If you do not receive confirmation from the search engines that we submit your web site to, we will give you your money back! Guaranteed! There is nothing to lose! Some testimonials of those that have used Regal Telecom "This service is my secret weapon. I never believed it was possible to have such a rapid response." etvcom.tv "I have been truly amazed by the results. I have received enquires from Austria, Hawaii, Spain and many different parts of Britain for my international real estate business. This is directly due to this service. I definitely recommend it! Worth every penny!" keyhomes.net "We run a Cancer Clinic and it is essential that our web site is submitted to as many search engines as possible. We are looking forward to having the capability to do online video conferencing and online diagnosis with our patients from many parts of the world. It is a real advantage to have the capabilities that Regal Telecom offers." Mari Posas Cancer Clinic. "We never received a single inquiry until we used Regal Telecom" noniuk.co.uk To submit your web site all we need is your web site and e-mail address. We will do the rest! Once we have submitted your web site you will receive a dramatic response by e-mail from search engines around the world confirming that you are listed on them. This will happen every month for the next year! To Book our Service Simply PRESS this BOOK NOW! Button and we can begin submitting your web site to the worlds search engines today! Then be ready for the response! Within 24 hours your web site will begin to be submitted to over 350 search engines world wide and every month thereafter for the next year. The results will astound you! Most of your competition are unaware of the facts below! This is to YOUR Advantage! Web Site Facts Remember "The Yellow Pages" Rule! A search engine is like an enormous "yellow pages" with thousands of companies advertising the same product. Unless you are near the front of the listing your chances of a customer actually seeing you is remote. Unlike a literal yellow pages there is a way to move YOU to the front and also get you on all of the "Yellow pages" in the world. What does it take to be seen on the Search Engines? Appreciate the Three Golden Rules q Search engines do not pull up the web sites at random they use a specific method of search. Those that know them are the ones at the top, those that do not are buried at the bottom! q Your web site must be submitted to the search engines every month otherwise your site gets pushed off (Its a bit like a Ferris wheel, you get on and then after a while you are taken off unless you get another ticket and get back on). q Understand the importance of Keywords, Meta tags, and Titles employed when submitting your site to the search engines! Use the right ones and you go up. Get it wrong and you go to the bottom! Some feel that it is enough to be on the large search engines. Wrong! The problem is because of their sheer size most web sites get buried. Having your web site professionally submitted can boost you up the listings of these larger search engines, so you can be found on them. Also many people use the smaller search engines and if your site is professionally submitted your chances of getting to the top are greatly increased. It is essential to be on them! Having Regal Telecom expertly submit your web site every month to worlds search engines will give YOU the Advantage you need. This can make the difference between new customers FINDING your web site or NOT! Be on ALL of these Search Engines Excite, Altavista, Google, Hotboot, WhatUseek, Lycos, WebCrawler, NorthernLight, DirectHit, AlltheWeb, Pepesearch, Searchit, http://search.yell.co.uk UK Directory http://www.yell.co.uk/yell/web/index.html http://www.ukdirectory.com UK Plus http://www.ukplus.co.uk UK Web TheBrit Index Media UK The UK Web Library http://www.scit.wlv.ac.uk UK Yellow Web Whatsnew http://www.whatsnew.com/uk http://yacc.co.uk/britind Demon Site of Sites http://www.brains.demon.co.ukm http://www.mediauk.com/directory LookSmart http://www.looksmart.co.ukUK Cybersearch http://www.cybersearch.co.uk UK/Ireland UK & Ireland http://www.altavista.telia.com Austria Austrian Internet Directory http://www.aid.co.at Intersearch http://austria.intersearch.net Advalvas Yellow Pages http://yellow.advalvas.be Le trouv'tout http://www2.ccim.be Webwatch http://webwatch.be Czech Republic CZECH Info Center http://www.icml.com Seznam http://www.seznam.cz Denmark Dansk Web Index http://www.web-index.dk Jubii http://www.jubii.dk France Carrefour http://www.carrefour.net CNRS http://www.cnrs.fr ECILA http://www.ecila.frECHO http://www.echo.fr France Excite http://fr.excite.com Lokace http://lokace.iplus.fr Nomade http://www.nomade.fr Voila http://www.voila.fr Wanadoo http://www.wanadoo.fr Germany Aladin http://www.aladin.de AllesKlar http://www.allesklar.de Crawler http://www.crawler.de DINO-Online http://dino-online.de Excite Deutschland http://www.excite.de Fireball Express http://www.fireball.de Flix http://www.flix.de Hit-Net http://hit-net.de Hotlist http://www.hotlist.de Inter-Fux http://www.inter-fux.com Intersearch http://www.de.intersearch.net Suchen http://www.suchen.de Lotse http://www.lotse.de Lycos http://www.lycos.de Nathan http://www.nathan.de Web-Archiv http://www.web-archiv.de WEB.DE http://web.de Deutschland Greece goGREECE http://www.gogreece.com Webindex Greece http://www.webindex.gr Spain ELCANO http://www.elcano.com Trovator http://trovator.combios.es LATIN AMERICA Argentina DNA Index http://www.iwcc.com Fiera http://www.fiera.com GauchoNet http://www.gauchonet.com Bolivia Bolivia Web http://www.boliviaweb.com Chile Chile Business Directory http://www.chilnet.cl Colombia Indexcol http://www.indexcol.com Que Hubo (The Colombian Yellow Pages http://www.quehubo.com Costa Rica Info Costa Rica http://www.info.co.cr Mexico Mexico Web Guide http://www.mexico.web.com.mx SBEL http://rtn.net.mx/sbel YUPI http://www.yupi.com Venezuela Auyantepui http://www.auyantepuy.com Venezuela Online http://www.venezuelaonline.com Yuada http://www.yuada.com.ve NORTH AMERICA Canada infoProbe http://www.infoprobe.net Maple Square http://maplesquare.com Sympatico Hungary Heureka http://www.heureka.hungary.com Italy Ragno Italiano http://ragno.plugit.net Search in Italy http://www2.crs4.it:8080 ShinySeek http://www.shinyseek.it Netherlands de Internet Gids http://www.markt.nl Ilse http://www.ilse.nl Search.NL http://www.search.nl SURFnet http://www.nic.surfnet.nl Norway Eunet Norge http://www.eunet.no Nettvik http://nettvik.no ORIGO http://www.origo.no SOL Kvasir http://kvasir.sol.no Slovakia KIO http://www.kio.sk Slovenia Slovenia Resources http://www.ijs.si/slo/resources Sweden Excite Sverige http://se.excite.com Lycos Sverige http://www.lycos.se Switzerland HEUREKA http://www.heureka.ch Netguide http://www.netguide.ch Schweizer Home-page Directory http://swisspage.ch Swisscom http://www.swisscom.ch Swiss FirmIndex Online http://www.firmindex.ch Swiss Web http://www.web.ch The Blue Window http://www.bluewin.ch Webdo http://www.webdo.ch Turkey Dost Net Turish Web Sites Directory http://www.dost.net Yugoslavia Yu Search http://www.yusearch.com MIDDLE EAST Isreal Maven http://www.maven.co.il Sivuv http://www.sivuv.co.il Start http://www.start.co.il WALLA http://www.walla.co.il AFRICA Regional Africa Online http://www.africaonline.com WoYaa!m http://www.woyaa.com South Africa Ananzi http://pub01.ananzi.co.za South Africa Online http://www.southafrica.co.za ASIA PACIFIC Regional Asia Internet Plaza http://www.asia-info.com AsianNet http://www.asiannet.com Asia Online http://www.asiadragons.com Asiaville http://www.asiaville.com GlobePage http://www.globepage.com SEA Quest http://seaquest.kusza.edu.my Search Dragon http://www.searchdragon.com South Asian Milan http://www.samilan.com Australia AAA Matilda http://www.aaa.com.au Alta Vista http://altavista.yellowpages.com.au Australia/New Zealand Anzwers http://www.anzwers.com.au Australia Aussie.com.au http://www.aussie.com.au The Australian Internet Directory http://203.17.138.111/taid The Australian Yellow Pages http://www.yellowpages.com.au LookSmart http://www.looksmart.com.au Australian Internet Directories http://www.sofcom.com/directories Search Australia http://www.cowleys.com.au Telstra http://www.telstra.com.au Web Wombat http://www.webwombat.com.au Hong Kong Hong Kong Internet Directory http://www.internet-directory.com Hong KongWorld Wide Web Database http://mmlab.csc.cuhk.edu.hkn Timway Hong Kong Search Engine http://www.hksrch.com/searchengine.html India 123India http://www.123india.com Khoj http://www.khoj.com Indonesia IndonesiaNet http://www.indonesianet.com/search.htm Japan Dragon Next http://dragon.co.jp Hole-in-One (Excite Japan) http://hole-in-one.com/hio InfoNavigator http://infonavi.infoweb.or.jp Mondou http://zagato.kuamp.kyoto-u.ac.jp Orions http://www.orions.ad.jp Stellar http://www.stellar.co.jp Watch http://www.watch.impress.co.jp Korea Oomph! http://www.oomph.net Malaysia Informative Malaysia http://www.infomal.com.my Malaysia Search Engine http://www.cari.com.my New Zealand Access New Zealand http://accessnz.co.nz Search http://www.searchnz.co.nz Singapore Singapore Unified Internet Directory http://edge.com.sgSurfer's Edge http://surferes.edge.com.sg And Many More! regaltelecom@europe.com ------_NextPart_3532120207 Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: QUOTED-PRINTABLE

 Your Holiday Home Web Site is

NOT Being SEEN

WHY?
NO ONE CAN FIND IT!
 
YOUR web site is NOT on many search engines and at the Bottom of their listings and as a result
 
YOU are LOSING customers who cannot find you!
 
Can this be changed? YES!
Regal Telecom
For ONLY =A379.97
 
We will submit your web site to over 350 of the worlds search engines.
(see full list of Search Engines at the end of this document)
 
We will submit your site with the most effective meta tags and keywords.
(See our money back guarantee)
 
We know what the search engines are looking for.
 
How do we know? We look at the top five web sites in your category and use the same meta tags and key words that they use.
 
If it works for them it will work for you!
 
So YOUR web site can be
FOUND and SEEN
 
For Twelve Months! Guaranteed!
 (See our testimonials)
 
 
Think about it!
Just as you have a web designer to build your site and a company to host your site,does it not make sense to use a company that specializes in professionally submitting your web site.
Getting your web site FOUND and SEEN!
 
 
 A Shocking Fact!
Your web site designer and your host are NOT responsible for getting your web site seen!  Yes, they may submit your site to a few search engines periodically but to stay on the TOP of the search engines is an aggressive business.
 
Getting onto the search engines and at the top of their listings doesn't  just happen.
 
You have to be put there!
 
What the.Net, The Internet Magazine 8/2000 said:
"You have your web site designed and have sorted out the maintenance and waiting for the business to roll in, but there's one small problem.... No one knows!"
 
You need a professional company to do it!
 
Your Money Back
Guarantee!
If you do not receive confirmation from the search engines that we submit your web site to, we will give you your money back! Guaranteed!
 
There is nothing to lose!
 
 
Some testimonials of those that have used
Regal Telecom
"This service is my secret weapon. I never believed it was possible to have such a rapid response." etvcom.tv
 
 
"I have been truly amazed by the results. I have received enquires from Austria, Hawaii, Spain and many different parts of Britain for my international real estate business. This is directly due to this service. I definitely recommend it!
Worth every penny!" keyhomes.net
 
"We run a Cancer Clinic and it is essential that our web site is submitted to as many search engines as possible. We are looking forward to having the capability to do online video conferencing and online diagnosis with our patients from many parts of the world. It is a real advantage to have the capabilities that
Regal Telecom offers." Mari Posas Cancer Clinic.
 
"We never received a single inquiry until we used Regal Telecom" noniuk.co.uk
 
 
To submit your web site all we need is your web site and  e-mail address.
 
We will do the rest!
 
Once we have submitted your web site you will receive a dramatic response by e-mail from search engines around the world confirming that you are listed on them.
 
 This will happen every month for the next year!
 
To Book our Service Simply
PRESS this
 
Button and we can begin submitting your web site to the worlds search engines today!
Then be ready for the response!
 
Within 24 hours your web site will begin to be submitted to over 350 search engines world wide and every month
 thereafter for the next year.
 
The results will astound you!
 
Most of your competition are unaware of the facts below!
This is to YOUR Advantage!
 
 
Web Site Facts
Remember "The Yellow Pages" Rule! 
 A search engine is like an enormous "yellow pages" with thousands of companies advertising the same product.  Unless you are near the front of the listing your chances of a customer actually seeing you is remote.  Unlike a literal yellow pages there is a way to move YOU to the front and also get you on all of the "Yellow pages" in the world.
 
What does it take to be seen on the
Search Engines?
 
Appreciate the Three Golden Rules

q Search engines do not pull up the web sites at random they use a specific method of search. Those that know them are the ones at the top, those that do not are buried at the bottom! 

q Your web site must be submitted to the search engines every month otherwise your site gets pushed off (Its a bit like a Ferris wheel, you get on and then after a while you are taken off unless you get another ticket and get back on).

q Understand the importance of Keywords, Meta tags, and Titles employed when submitting your site to the search engines! 

Use the right ones and you go up.

Get it wrong and you go to the bottom!

Some feel that it is enough to be on the large search engines.
Wrong! The problem is because of their sheer size most web sites get buried.  Having your web site professionally submitted can boost you up the listings of these larger search engines, so you can be found on them.  Also many people use the smaller search engines and if your site is professionally submitted your chances of getting to the top are greatly increased.
 
It is essential to be on them!
 
Having Regal Telecom expertly submit your web site every month to worlds search engines will give YOU the Advantage you need. 
 This can make the difference between new customers
FINDING your web site or NOT!
 
Be on ALL of these
Search Engines
 Excite, Altavista, Google, Hotboot, WhatUseek, Lycos, WebCrawler, NorthernLight, DirectHit, AlltheWeb, Pepesearch, Searchit, 
http://search.yell.co.uk   UK Directory http://www.yell.co.uk/yell/web/index.html
http://www.ukdirectory.com UK Plus http://www.ukplus.co.uk
UK Web TheBrit Index Media UK The UK Web Library http://www.scit.wlv.ac.uk UK Yellow Web  Whatsnew http://www.whatsnew.com/uk http://yacc.co.uk/britind
Demon Site of Sites http://www.brains.demon.co.ukm http://www.mediauk.com/directory LookSmart http://www.looksmart.co.ukUK Cybersearch
http://www.cybersearch.co.uk UK/Ireland UK & Ireland http://www.altavista.telia.com
Austria Austrian Internet  Directory http://www.aid.co.at Intersearch
http://austria.intersearch.net Advalvas Yellow Pages http://yellow.advalvas.be
Le trouv'tout http://www2.ccim.be Webwatch http://webwatch.be Czech Republic
CZECH Info Center http://www.icml.com Seznam http://www.seznam.cz Denmark
Dansk Web Index http://www.web-index.dk Jubii http://www.jubii.dk France Carrefour
http://www.carrefour.net CNRS http://www.cnrs.fr ECILA http://www.ecila.frECHO http://www.echo.fr France Excite http://fr.excite.com Lokace http://lokace.iplus.fr Nomade http://www.nomade.fr Voila
http://www.voila.fr Wanadoo http://www.wanadoo.fr Germany Aladin http://www.aladin.de
AllesKlar http://www.allesklar.de  Crawler http://www.crawler.de
DINO-Online http://dino-online.de Excite Deutschland http://www.excite.de
Fireball Express http://www.fireball.de Flix http://www.flix.de Hit-Net http://hit-net.de
Hotlist http://www.hotlist.de Inter-Fux http://www.inter-fux.com Intersearch
http://www.de.intersearch.net Suchen http://www.suchen.de Lotse
Spain ELCANO http://www.elcano.com   Trovator http://trovator.combios.es
LATIN  AMERICA Argentina DNA Index http://www.iwcc.com Fiera http://www.fiera.com
GauchoNet http://www.gauchonet.com Bolivia Bolivia Web http://www.boliviaweb.com
Chile Chile Business Directory http://www.chilnet.cl Colombia Indexcol http://www.indexcol.com Que Hubo (The  Colombian Yellow  Pages http://www.quehubo.com Costa Rica Info Costa Rica http://www.info.co.cr Mexico
Mexico Web Guide http://www.mexico.web.com.mx SBEL http://rtn.net.mx/sbel
YUPI http://www.yupi.com Venezuela Auyantepui http://www.auyantepuy.com
Venezuela Online http://www.venezuelaonline.com Yuada http://www.yuada.com.ve
NORTH  AMERICA Canada infoProbe http://www.infoprobe.net Maple Square
http://maplesquare.com Sympatico Hungary Heureka http://www.heureka.hungary.com
Italy Ragno Italiano http://ragno.plugit.net Search in Italy http://www2.crs4.it:8080
ShinySeek http://www.shinyseek.it Netherlands de Internet Gids http://www.markt.nl
Ilse http://www.ilse.nl Search.NL http://www.search.nl  SURFnet http://www.nic.surfnet.nl
Norway Eunet Norge http://www.eunet.no Nettvik http://nettvik.no ORIGO
http://www.origo.no SOL Kvasir http://kvasir.sol.no Slovakia
KIO http://www.kio.sk Slovenia Slovenia Resources http://www.ijs.si/slo/resources
Sweden Excite Sverige http://se.excite.com Lycos Sverige
http://www.lycos.se Switzerland HEUREKA http://www.heureka.ch Netguide
http://www.netguide.ch Schweizer Home-page  Directory http://swisspage.ch
Swisscom http://www.swisscom.ch Swiss FirmIndex Online http://www.firmindex.ch
Swiss Web http://www.web.ch The Blue Window http://www.bluewin.ch Webdo
http://www.webdo.ch Turkey Dost Net Turish Web  Sites Directory http://www.dost.net
Yugoslavia Yu Search http://www.yusearch.com MIDDLE  EAST Isreal Maven http://www.maven.co.il Sivuv http://www.sivuv.co.il Start http://www.start.co.il
WALLA http://www.walla.co.il AFRICA Regional Africa Online http://www.africaonline.com
WoYaa!m http://www.woyaa.com South Africa Ananzi http://pub01.ananzi.co.za South Africa Online http://www.southafrica.co.za ASIA
PACIFIC Regional Asia Internet Plaza  http://www.asia-info.com AsianNet http://www.asiannet.com Asia Online http://www.asiadragons.com Asiaville
http://www.asiaville.com GlobePage http://www.globepage.com SEA Quest http://seaquest.kusza.edu.my Search Dragon http://www.searchdragon.com
South Asian Milan http://www.samilan.com Australia AAA Matilda http://www.aaa.com.au
Alta Vista http://altavista.yellowpages.com.au Australia/New  Zealand Anzwers
http://www.anzwers.com.au Australia Aussie.com.au http://www.aussie.com.au
The Australian Internet  Directory http://203.17.138.111/taid The Australian Yellow
Pages http://www.yellowpages.com.au LookSmart http://www.looksmart.com.au
Australian Internet  Directories http://www.sofcom.com/directories
Search Australia http://www.cowleys.com.au Telstra http://www.telstra.com.au
Web Wombat http://www.webwombat.com.au Hong Kong Hong Kong Internet  Directory
http://www.internet-directory.com Hong KongWorld Wide
Web Database http://mmlab.csc.cuhk.edu.hkn Timway Hong Kong  Search Engine
http://www.hksrch.com/searchengine.html India 123India http://www.123india.com
Khoj http://www.khoj.com Indonesia IndonesiaNet http://www.indonesianet.com/search.htm
Japan Dragon Next http://dragon.co.jp Hole-in-One (Excite  Japan) http://hole-in-one.com/hio InfoNavigator http://infonavi.infoweb.or.jp Mondou http://zagato.kuamp.kyoto-u.ac.jp Orions http://www.orions.ad.jp Stellar http://www.stellar.co.jp Watch
http://www.watch.impress.co.jp Korea Oomph! http://www.oomph.net Malaysia   Informative Malaysia http://www.infomal.com.my Malaysia Search Engine http://www.cari.com.my
New Zealand Access New Zealand http://accessnz.co.nz Search http://www.searchnz.co.nz
Singapore Singapore Unified  Internet Directory http://edge.com.sgSurfer's Edge
http://surferes.edge.com.sg
And Many More!

------_NextPart_3532120207-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 14:56:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from glow.binity.net (glow.binity.net [213.84.201.224]) by hub.freebsd.org (Postfix) with ESMTP id 5946E37B405 for ; Sat, 4 May 2002 14:56:44 -0700 (PDT) Received: from vscan (glow.dt1.binity.net [172.23.18.1]) by glow.binity.net (Postfix) with ESMTP id A1F0755D5; Sat, 4 May 2002 23:57:01 +0200 (CEST) Received: from silver.dt1.binity.net (silver.dt1.binity.net [172.23.3.20]) by glow.binity.net (Postfix) with ESMTP id DDB68548A; Sat, 4 May 2002 23:56:59 +0200 (CEST) Date: Sat, 4 May 2002 23:56:53 +0200 From: Walter Hop X-Mailer: The Bat! (v1.53d) Educational X-Priority: 3 (Normal) Message-ID: <16632662726.20020504235653@binity.com> To: Axel Scheepers Cc: Rob King , freebsd-questions@freebsd.org Subject: Re[2]: Possible bug in miibus, fxp, and xl? In-Reply-To: <20020504203129.I13115@mars.thuis> References: <3CD2E8D1.1040100@wholefoods.com> <20020504203129.I13115@mars.thuis> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: by glow.binity.net (amavis-perl-11-sky2) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG [in reply to axel@axel.truedestiny.net, 04-05-2002] >> I'm running 4.5-RELEASE, i386 on a Dell server box. The machine >> keeps locking up whenever I do large network transfers. At first I >> thought it was a problem with the on-motherboard ethernet card (xl0), >> but when I put an fxp-driven card in, and removed kernel support for >> xl0, it still locks up on large network transfers. I have experienced this with a certain newer batch of fxp's - They all caused sudden lockups or reboots (no panics) with a large network load; this seemed to be the case especially when the fxp was combined with certain other hardware such as an ahc SCSI controller (although they did not share any resources..) Stresstesting a test machine yielded a reboot within the hour. The same setup with a D-LINK network card (ste device) withstood the same stress test (a lot of bzip2'ing over NFS and packetflooding) without problems. Overall the D-LINK card was a very nice experience; if you can't find the source of your problems, you could try one of those. -- Walter Hop | +31 6 24452020 | PGP keyid 0x84813998 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 15:58:19 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out0.mx.nwbl.wi.voyager.net (out0.mx.nwbl.wi.voyager.net [169.207.1.78]) by hub.freebsd.org (Postfix) with ESMTP id 1123337B405 for ; Sat, 4 May 2002 15:58:17 -0700 (PDT) Received: from shell.core.com (shell.core.com [169.207.1.89]) by out0.mx.nwbl.wi.voyager.net (8.12.3/8.11.4/1.7) with ESMTP id g44N0QbJ021289; Sat, 4 May 2002 18:00:26 -0500 Received: (from dpoland@localhost) by shell.core.com (8.11.6/8.11.6/1.3) id g44MwFv18293; Sat, 4 May 2002 17:58:15 -0500 (CDT) Date: Sat, 4 May 2002 17:58:15 -0500 From: Doug Poland To: questions@freebsd.org, discuss@openoffice.org Subject: OpenOffice 1.0 works on FreeBSD 4.5-STABLE (linux-base_7.1_2) Message-ID: <20020504175814.A17894@polands.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Finally got the linux version of OpenOffice 1.0 off a download site and installed it. I've opened a couple of MS-Word and MS- Excel documents and they work. Opened a swriter document created in 641d on MS-Win2k and it works. Setup didn't recognize my native FreeBSD jdk1.3.1 as a valid java environment. No really sure what that's needed for anyway. Obviously haven't done exhausting testing but am encouraged to get this far. Can't wait for the native FreeBSD build. -- Regards, Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 16:56: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.uc3m.es (smtp03.uc3m.es [163.117.136.123]) by hub.freebsd.org (Postfix) with ESMTP id 153C837B405 for ; Sat, 4 May 2002 16:56:04 -0700 (PDT) Received: from smtp03.uc3m.es (localhost [127.0.0.1]) by smtp.uc3m.es (Postfix) with ESMTP id D5DCF4318B for ; Sun, 5 May 2002 01:56:02 +0200 (CEST) Received: from lmserv2.lab.it.uc3m.es (lmserv2.lab.it.uc3m.es [163.117.144.152]) by smtp03.uc3m.es (Postfix) with ESMTP id 8A03699DE3 for ; Sun, 5 May 2002 01:56:02 +0200 (CEST) Received: from lm009.lab.it.uc3m.es (root@lm009.lab.it.uc3m.es [163.117.144.138]) by lmserv2.lab.it.uc3m.es (8.9.3/8.9.3) with ESMTP id BAA18054 for ; Sun, 5 May 2002 01:56:01 +0200 Received: from localhost (jrh@localhost) by lm009.lab.it.uc3m.es (8.9.3/8.9.3/Debian 8.9.3-21) with SMTP id BAA27773 for ; Sun, 5 May 2002 01:56:00 +0200 Date: Sun, 5 May 2002 01:56:00 +0200 (CEST) From: Juan Francisco Rodriguez Hervella To: "(Lista)" Subject: Can not burn a CD with "burncd" Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello: Im trying to copy a CD using "burncd" (I've got FreeBSD-4.3) "dmesg" shows this: ad0: 6187MB [13410/15/63] at ata0-master UDMA33 acd0: CDROM at ata0-slave using PIO4 acd1: CD-RW <_NEC NR-7500A> at ata1-slave using PIO4 Well, when I exec: burncd -f /dev/acd1c data * fixate These errors are reported: burncd: ioctl(CDRIOCOPENTRACK): Input/output error May 5 01:22:56 juanillo /kernel: acd1: READ_TOC - ILLEGAL REQUEST asc=24 ascq=00 error=04 May 5 01:22:56 juanillo /kernel: acd1: MODE_SELECT_BIG - ILLEGAL REQUEST asc=26 ascq=00 error=04 May 5 01:22:56 juanillo /kernel: acd1: MODE_SELECT_BIG - ILLEGAL REQUEST asc=26 ascq=00 error=04 Can someone help me ? Thanks a lot. ***** JFRH ***** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 16:56:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from beniaminus.red.cert.org (beniaminus.red.cert.org [192.88.209.10]) by hub.freebsd.org (Postfix) with ESMTP id E4D8E37B417 for ; Sat, 4 May 2002 16:56:00 -0700 (PDT) Received: from smtp.indigo.cert.org (smtp.indigo.cert.org [192.88.209.150]) by beniaminus.red.cert.org (8.9.3/8.9.3/1.76) with ESMTP id TAA26730 for ; Sat, 4 May 2002 19:55:58 -0400 (EDT) Received: (from mailnull@localhost) by smtp.indigo.cert.org (8.9.3/8.9.3/2.9) id TAA12004; Sat, 4 May 2002 19:55:26 -0400 (EDT) Message-Id: <200205042355.TAA12004@smtp.indigo.cert.org> From: "CERT(R) Coordination Center" Reply-To: "CERT(R) Coordination Center" Date: Sat, 04 May 2002 19:55:26 EDT To: questions Subject: Re: Fw:some questions X-Cert-Autoreply: <200205042354.TAA26710@beniaminus.red.cert.org> References: <200205042354.TAA26710@beniaminus.red.cert.org> In-Reply-To: <200205042354.TAA26710@beniaminus.red.cert.org> from Questions on Sat, 4 May 2002 19:54:56 -0400 (EDT) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- *************************************************************************** [NOTE -- THIS IS AN AUTOMATED RESPONSE] Thank you for contacting the CERT(R) Coordination Center. We appreciate your contacting us and consider your communications with us to be very important. Because we focus our response efforts to have the greatest impact on the Internet community, we may be unable to provide you with a personal response to your message. Please review the pointers contained in this message for information which may be of immediate use to you. Section A - CERT/CC Current Activity Section B - Incident Reporting Information Section C - Vulnerability Reporting Information If you need additional information from the CERT/CC, we encourage you to begin by looking at our list of CERT/CC Frequently Asked Questions: http://www.cert.org/faq/cert_faq.html ====================================================================== Section A - CERT/CC Current Activity The CERT/CC Current Activity web page provides a summary list of the most frequent types of incident and vulnerability activity currently being reported to the CERT/CC. Please refer to this regularly updated page to obtain immediate assistance in response to frequently reported activity: http://www.cert.org/current/current_activity.html In addition, the latest CERT/CC documents can be found at: * CERT Advisories - http://www.cert.org/advisories/ * CERT Incident Notes - http://www.cert.org/incident_notes/ * CERT Vulnerability Notes - http://www.kb.cert.org/vuls/ * CERT Summaries - http://www.cert.org/summaries/ * CERT Tech Tips - http://www.cert.org/tech_tips/ * What's New - http://www.cert.org/nav/whatsnew.html * CERT/CC Web Site - http://www.cert.org/ For pointers to information about computer viruses and hoaxes, please see: * http://www.cert.org/other_sources/viruses.html ====================================================================== Section B - Incident Reporting Information We appreciate receiving incident reports because it helps us to gain a better understanding of ongoing intruder activities and attack profiles. From the information we receive, we are able to identify and address critical security issues within the Internet community. Because we prioritize our response efforts to have the greatest impact on the Internet community, we are not be able to provide everyone with a personal response. For general information about reporting incidents to the CERT/CC, please see our Incident Reporting Guidelines at: http://www.cert.org/tech_tips/incident_reporting.html To report incidents to the CERT/CC, please send information about the incident in plain text format to cert@cert.org. You may wish to use our Incident Reporting Form, located at: http://www.cert.org/reporting/incident_form.txt The CERT/CC considers the following types of incidents to be emergencies: * possible life-threatening activity * attacks on the Internet infrastructure, such as: - root name servers - domain name servers - major archive sites - network access points (NAPs) * widespread automated attacks against Internet sites * new types of attacks or new vulnerabilities If you are reporting such an emergency outside our operational hours - business days between 08:00-17:00 EST/EDT (GMT-5/GMT-4) and require immediate assistance, then please call the CERT hotline: +1 412 268 7090 If you believe the intruder activity is a threat to people's lives or to the Internet infrastructure, please contact us immediately. ====================================================================== Section C - Vulnerability Reporting Information If you would like to report a new type of vulnerability or tool being used by the intruder community, we would be interested in any details that you may have. If you are able, please include any or all of source code, log files of execution, and descriptions of operating dependencies. Please feel free to submit these details in ASCII format files (where possible) of your own design, or if you prefer to use a form, please see the file: http://www.cert.org/reporting/vulnerability_form.txt Please also encrypt the report using PGP if you are able to do so. Instructions are given at the top of the reporting form. ====================================================================== CERT(R) Coordination Center Software Engineering Institute Carnegie Mellon University Pittsburgh, PA USA 15213-3890 Internet e-mail: cert@cert.org (monitored during business hours) Telephone: +1-412-268-7090 24-hour hotline CERT Coordination Center personnel answer business days 08:00-17:00 EST/EDT (GMT-5)/(GMT-4), on call for emergencies during other hours. Fax: +1-412-268-6989 CERT and CERT Coordination Center are registered in U.S. Patent and Trademark Office. -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8 iQCVAwUBPDNbnaCVPMXQI2HJAQHvcwQAljLIFBVtoFPoATWgbU/n5PSuz3cTT6Mw 2BEemoZN7xpQczGMDXgBapzFmTRiq3oVM1aSbpKZ6W8CGjoCQOdxGGQ22kTpFaHK e4j+b2Juym8aOWYuEmXxaw9MVPh79Bh8eIOC3npuYEXbEvlQPRyuDyNCZq5Vwe6b Y2ubokmJD3M= =q5NW -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 18:12: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.rdc-kc.rr.com (smtp1.rdc-kc.rr.com [24.94.162.200]) by hub.freebsd.org (Postfix) with ESMTP id D717837B419 for ; Sat, 4 May 2002 18:11:58 -0700 (PDT) Received: from pop-server.wi.rr.com (mke-65-31-95-21.wi.rr.com [65.31.95.21]) by smtp1.rdc-kc.rr.com (8.12.2/8.12.2) with SMTP id g451Brpt017658; Sat, 4 May 2002 20:11:53 -0500 (CDT) Date: Sat, 4 May 2002 20:12:00 -0500 From: Nick Lozinsky To: freebsd-questions@freebsd.org Subject: Double mail (multiple messages) Message-ID: <20020504201200.A122@kozak.wi.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, For a while now, I've been receiving two messages, whenever I am posting to the mailing list or just plain sending mail. Two of the same messages come to me. I know this could be a factor of cc: but I've tested this out on my own, by sending a message to myself, and still, I get two copies of the same message in my mailbo. This happens with mutt and outlook; anyone know why? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 19:12:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id BF2A637B416 for ; Sat, 4 May 2002 19:12:35 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id EFDA4A804; Sun, 5 May 2002 12:12:33 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id EC679542D; Sun, 5 May 2002 12:12:33 +1000 (EST) Date: Sun, 5 May 2002 12:12:33 +1000 (EST) From: Andrew To: Juan Francisco Rodriguez Hervella Cc: "(Lista)" Subject: Re: Can not burn a CD with "burncd" In-Reply-To: Message-ID: <20020505121110.N51780-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 5 May 2002, Juan Francisco Rodriguez Hervella wrote: > ad0: 6187MB [13410/15/63] at ata0-master UDMA33 > acd0: CDROM at ata0-slave using PIO4 > acd1: CD-RW <_NEC NR-7500A> at ata1-slave using PIO4 You don't have anything as ata1-master. You can't have a slave without a master. May not be causing your problems but it may cause others. Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 19:23:49 2002 Delivered-To: freebsd-questions@freebsd.org Received: from alpha2-tu0.mtco.com (ns.mtco.com [207.179.200.2]) by hub.freebsd.org (Postfix) with SMTP id BA3B337B404 for ; Sat, 4 May 2002 19:23:46 -0700 (PDT) Received: (qmail 486014 invoked from network); 5 May 2002 02:20:33 -0000 Received: from tnt12-108.mtco.com (HELO wkst1) (207.179.215.237) by ns.mtco.com with SMTP; 5 May 2002 02:20:33 -0000 Message-ID: <000801c1f3dc$3e4d1bc0$edd7b3cf@wkst1> From: "Joe Manning" To: Subject: Date: Sat, 4 May 2002 21:26:19 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1F3B2.54D50760" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1F3B2.54D50760 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Is the ATI Radeon 7500 series supported by freeBSD, if not what is an = equivalent card that I could use? jmanning@mtco.net ------=_NextPart_000_0005_01C1F3B2.54D50760 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Is the ATI Radeon 7500 series supported = by freeBSD,=20 if not what is an equivalent card that I could use?
 
jmanning@mtco.net
------=_NextPart_000_0005_01C1F3B2.54D50760-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 19:40:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21507.mail.yahoo.com (web21507.mail.yahoo.com [66.163.169.18]) by hub.freebsd.org (Postfix) with SMTP id 4DA3437B41A for ; Sat, 4 May 2002 19:40:42 -0700 (PDT) Message-ID: <20020505024042.56578.qmail@web21507.mail.yahoo.com> Received: from [66.3.230.240] by web21507.mail.yahoo.com via HTTP; Sat, 04 May 2002 19:40:42 PDT Date: Sat, 4 May 2002 19:40:42 -0700 (PDT) From: Jeff Mitchell Subject: Re: To: Joe Manning , freebsd-questions@freebsd.org In-Reply-To: <000801c1f3dc$3e4d1bc0$edd7b3cf@wkst1> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- Joe Manning wrote: > Is the ATI Radeon 7500 series supported by freeBSD, if not what is an > equivalent card that I could use? > > jmanning@mtco.net > This is supposedly one of the better cards for FreeBSD if you want 2D/3D performance, so yes it is supported. Compile the latest XFree86-4.2 from ports. If you want 3D OpenGL acceleration, compile graphics/drm-kmod from ports and follow the instructions carefully. BTW, Google is the modern-day equivalent of the local shaman. This question was answered immediately by typing "freebsd radeon 7500" into groups.google.com. Regards, Jeff __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 20:57: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from icc.cgu.chel.su (gw.csu.ru [195.54.14.5]) by hub.freebsd.org (Postfix) with ESMTP id 4CC6E37B419 for ; Sat, 4 May 2002 20:57:02 -0700 (PDT) Received: from mail.cgu.chel.su (mail.cgu.chel.su [195.54.14.68]) by icc.cgu.chel.su (8.11.6/8.11.6) with ESMTP id g453uud10718 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sun, 5 May 2002 09:56:56 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from mail.cgu.chel.su (localhost [127.0.0.1]) by mail.cgu.chel.su (8.12.3/8.11.2) with ESMTP id g453utvr078956 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO); Sun, 5 May 2002 09:56:55 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: (from uucp@localhost) by mail.cgu.chel.su (8.12.3/8.12.3/Submit) with UUCP id g453utsb078955; Sun, 5 May 2002 09:56:55 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Received: from localhost (localhost.cgu.chel.su [127.0.0.1]) by jane.poka.net (8.12.3/8.11.1) with ESMTP id g453ps8J000381; Sun, 5 May 2002 09:51:54 +0600 (YEKST) (envelope-from ilia@cgu.chel.su) Date: Sun, 5 May 2002 09:51:54 +0600 (YEKST) From: Ilia Chipitsine X-Sender: ilia@jane.poka.net To: Tim Boring Cc: questions@FreeBSD.ORG Subject: Re: exporting /home via SMB In-Reply-To: <1020539176.21538.46.camel@tim.dynofrog.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Salut, Tim Boring ! yeah, .profile is good idea. than you! On 4 May 2002, Tim Boring wrote: > Hi, Ilia! > > On Sat, 2002-05-04 at 12:43, Ilia Chipitsine wrote: > > Salut, Tim Boring ! > > > > On 4 May 2002, Tim Boring wrote: > > > > > > The server you're importing from...is it Unix or Windows? If it's a > > > Unix machine, why not just use NFS instead of SMB? Or do you have a > > > specific need to use SMB? > > > > NFS is piece of crap, it supports neither locking, nor quotas. > > on the other hand I already export [homes] via SMB. I just > > wanted that /home/someuser to be mounted at the time user logs in. > > It would be nice. Another advantage of SMB is that, I can export > > some directories with read/write permissions, some directories > > with read-only, an some directories I probably don't want to export. > > That machine has "/" on a single partition, so NFS makes me export > > "/" as read/write. I don't want that. > > Good points. So let me see if I understand this: > 1. The user home directories are being exported from one server via SMB. > 2. They are being imported on another server (but not mounted). > 3. You want the user's imported home directory to be mounted when they > log in. > > Is that a fair summary of what you would like to have happen? > > What if you try something like this: > 1. Set up users with a temporary home directory (if this isn't already > the case). > 2. In each user's startup file (.profile, .bashrc, or whatever they're > using), include a routine to check for the existence of /home/someuser. > 3. If /home/someuser exists, then the login proceeds as normal. > 4. If /home/someuser does not exist, then mount the directory with > either smbmount or smbwrapper. > 5. Once /home/someuser is mounted successfully, the user's shell cd's to > that directory and proceed as normal. > 6. If that won't work, then what about including something similar in a > startup script that gets run during the bootup process? Then the system > mounts all the home directories and they're available when the user logs > in. > > I don't know if that will do exactly what you need, because I've not had > a need to export/import between Unix boxes using SMB...I'm typically > exporting from a unix box and mounting the shares on windows pcs. > > Another source that might be helpful is the comp.protocols.smb > newsgroup. > > Good luck! > > Tim > > > Regards, (îÁÉÌÕÞÛÉÅ ÐÏÖÅÌÁÎÉÑ) Ilia Chipitsine (éÌØÑ ûÉÐÉÃÉÎ) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 21: 6:46 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-63-207-60-43.dsl.lsan03.pacbell.net [63.207.60.43]) by hub.freebsd.org (Postfix) with ESMTP id 3A16437B41B for ; Sat, 4 May 2002 21:06:44 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 582E066E6B; Sat, 4 May 2002 21:06:40 -0700 (PDT) Date: Sat, 4 May 2002 21:06:39 -0700 From: Kris Kennaway To: Glenn Guillot Cc: freebsd-questions@FreeBSD.ORG Subject: Re: pppoe Message-ID: <20020504210639.A67054@xor.obsecurity.org> References: <000c01c1955b$bbf14b80$0200a8c0@iceman> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="tThc/1wpZn/ma/RB" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <000c01c1955b$bbf14b80$0200a8c0@iceman>; from icebox@online.no on Fri, Jan 04, 2002 at 09:09:32PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --tThc/1wpZn/ma/RB Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Jan 04, 2002 at 09:09:32PM +0100, Glenn Guillot wrote: > hey im having some problems with my ppp to work i cant connect only get the msg > unrecognized option pty Use ppp(8) Kris --tThc/1wpZn/ma/RB Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (FreeBSD) iD8DBQE81K/PWry0BWjoQKURAlXhAKDWTXyNOxB3atJbWzzFwkX/BCOwbACgpUzV hIJOY3ipJRpbLIOPoxFd3mU= =JJEh -----END PGP SIGNATURE----- --tThc/1wpZn/ma/RB-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 21:10:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from m20.unixathome.org (m20.unixathome.org [216.187.106.227]) by hub.freebsd.org (Postfix) with ESMTP id 5624237B417; Sat, 4 May 2002 21:10:49 -0700 (PDT) Received: (from dan@localhost) by m20.unixathome.org (8.11.6/8.11.6) id g454A2084875; Sun, 5 May 2002 00:10:02 -0400 (EDT) (envelope-from dan) Date: Sun, 5 May 2002 00:10:02 -0400 (EDT) Message-Id: <200205050410.g454A2084875@m20.unixathome.org> From: Dan Langille To: freebsd-newbies@freebsd.org, freebsd-questions@freebsd.org Subject: The FreeBSD Diary: 2002-04-14 - 2002-05-04 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives and/or The FreeBSD Diary . These are the articles posted during this period: 26-Apr : Creating a VPN using PPTP net/pptpclient is easy to use http://freebsddiary.org/pptp.php?2 -- Dan Langille - DVL Software Limited The FreeBSD Diary - http://freebsddiary.org/ - practical examples FreshPorts - http://freshports.org/ - the place for ports To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 21:32:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from natsemi-bh.nsc.com (natsemi-bh.nsc.com [204.163.202.66]) by hub.freebsd.org (Postfix) with ESMTP id 0000B37B42A for ; Sat, 4 May 2002 21:32:38 -0700 (PDT) Received: (from uucp@localhost) by natsemi-bh.nsc.com (8.8.8/8.6.11) id VAA03897 for ; Sat, 4 May 2002 21:32:38 -0700 (PDT) Received: from nsc.nsc.com(139.187.81.1) by natsemi-bh.nsc.com via smap (4.1) id xma003890; Sat, 4 May 02 21:32:34 -0700 Received: from malkauns.malkauns.nsc.com (malkauns.nsc.com [139.187.83.131]) by nsc.nsc.com (8.10.2+Sun/8.10.2) with SMTP id g454WTS03049 for ; Sat, 4 May 2002 21:32:30 -0700 (PDT) Received: from malkauns.nsc.com by malkauns.malkauns.nsc.com (SMI-8.6/SMI-SVR4) id KAA19381; Sun, 5 May 2002 10:08:04 +0530 Message-ID: <3CD4B6D2.9858CAE0@malkauns.nsc.com> Date: Sun, 05 May 2002 10:06:34 +0530 From: shubhamr Reply-To: shubhamr@malkauns.nsc.com X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "questions@FreeBSD.ORG" Subject: such a pain Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have some .c files which I got from my windows machine.But when I read it on BSD,for every line end ^M shows up,whereever there is a newline(carriage return).It is tedious to remove them manually.I have no X installed on my BSD.Can anyone suggest how to get rid of them? shubha To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 21:41:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp1out.rdc-nyc.rr.com (nycsmtp1out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id A15F737B41A for ; Sat, 4 May 2002 21:41:53 -0700 (PDT) Received: from smtp-server.nyc.rr.com (24-168-24-239.nyc.rr.com [24.168.24.239]) by nycsmtp1out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with SMTP id g454e3o0002588; Sun, 5 May 2002 00:40:03 -0400 (EDT) Received: by smtp-server.nyc.rr.com (sSMTP sendmail emulation); Sun, 5 May 2002 00:41:49 -0500 Date: Sun, 5 May 2002 00:41:49 -0500 From: scottro@despammed.com To: shubhamr Cc: "questions@FreeBSD.ORG" Subject: Re: such a pain Message-ID: <20020505054149.GA2060@scott1.homeunix.net> References: <3CD4B6D2.9858CAE0@malkauns.nsc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3CD4B6D2.9858CAE0@malkauns.nsc.com> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, May 05, 2002 at 10:06:34AM +0530, shubhamr wrote: > Hi, > I have some .c files which I got from my windows machine.But when I read > it on BSD,for every line end ^M shows up,whereever there is a > newline(carriage return).It is tedious to remove them manually.I have no > X installed on my BSD.Can anyone suggest how to get rid of them? > > shubha In BSD, open the file with the vi editor vi Once you have it there type :%s/ctrl +V ctrl+ M//g That will do it. The ctrl + V tells it to enter the next character literally---otherwise, the ctrl + M wouldn't show up. HTH Scott Robbins To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 21:45:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kpax.icsmx.com (kpax.icsmx.com [200.33.246.13]) by hub.freebsd.org (Postfix) with ESMTP id AF7A937B41D for ; Sat, 4 May 2002 21:45:49 -0700 (PDT) Received: from mipc.intranet.com.mx ([200.33.246.101]) by kpax.icsmx.com (8.11.6/8.11.6) with ESMTP id g454hJv43818 for ; Sat, 4 May 2002 23:43:20 -0500 (CDT) (envelope-from jbiquez@icsmx.com) Message-Id: <5.1.0.14.2.20020504234233.02f3e020@icsmx.com> X-Sender: jbiquez@icsmx.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sat, 04 May 2002 23:43:02 -0500 To: "questions@FreeBSD.ORG" From: Jorge Biquez Subject: Re: such a pain In-Reply-To: <20020505054149.GA2060@scott1.homeunix.net> References: <3CD4B6D2.9858CAE0@malkauns.nsc.com> <3CD4B6D2.9858CAE0@malkauns.nsc.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 00:41 05/05/02 -0500, you wrote: >On Sun, May 05, 2002 at 10:06:34AM +0530, shubhamr wrote: > > Hi, > > I have some .c files which I got from my windows machine.But when I read > > it on BSD,for every line end ^M shows up,whereever there is a > > newline(carriage return).It is tedious to remove them manually.I have no > > X installed on my BSD.Can anyone suggest how to get rid of them? > > > > shubha Have you tried transferring the files in ASCII mode from your PC? JB To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 22: 0:54 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21502.mail.yahoo.com (web21502.mail.yahoo.com [66.163.169.13]) by hub.freebsd.org (Postfix) with SMTP id D82B937B400 for ; Sat, 4 May 2002 22:00:51 -0700 (PDT) Message-ID: <20020505050051.60490.qmail@web21502.mail.yahoo.com> Received: from [66.3.230.240] by web21502.mail.yahoo.com via HTTP; Sat, 04 May 2002 22:00:51 PDT Date: Sat, 4 May 2002 22:00:51 -0700 (PDT) From: Jeff Mitchell Subject: Re: such a pain To: shubhamr@malkauns.nsc.com, "questions@FreeBSD.ORG" In-Reply-To: <3CD4B6D2.9858CAE0@malkauns.nsc.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- shubhamr wrote: > Hi, > I have some .c files which I got from my windows machine.But when I > read > it on BSD,for every line end ^M shows up,whereever there is a > newline(carriage return).It is tedious to remove them manually.I have > no > X installed on my BSD.Can anyone suggest how to get rid of them? > > shubha > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message perl -p -i -e 's(\015\012)(\012)' file1 file2 file3 ... Regards, Jeff __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 22:10:27 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.eagle.ca (mail2.eagle.ca [209.167.16.30]) by hub.freebsd.org (Postfix) with ESMTP id 68D1C37B417 for ; Sat, 4 May 2002 22:10:24 -0700 (PDT) Received: from afi (38.eagle.speede.com [64.39.177.38]) by mail2.eagle.ca (8.11.3/8.11.3) with SMTP id g4552ok10913; Sun, 5 May 2002 01:02:50 -0400 (EDT) (envelope-from lists@brenius.com) Message-ID: <000401c1f3f3$214a3b40$0200a8c0@afi> From: To: Cc: References: <20020504093131.E5288-100000@x1-6-00-80-c8-3a-b8-46.kico2.on.cogeco.ca> Subject: Re: bash & csh History Date: Sun, 5 May 2002 01:10:09 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi Dru, > In the .history file of the user's home directory. If they su to root, in > the .history file found in /root. Gotcha, thanks. > Bash is a little bit more interesting as its history is kept in memory > until the user logs out. Then it is stored in the user's .bash_history file in > their home directory. That is what I seemed to be seeing, it was just my history file was getting too big. > for csh: set history=# in user's .cshrc > for bash: HISTSIZE=# in user's .profile That make sense, I just added it, so we will see how it goes. > Use "vipw" and change that user's shell to bash. Is that part of the OS or a port? I am not logged in right now so won`t be able to check until tomorrow. Anymore info on this program? >You could do the same for the root user's entry, but AFAIK this causes > problems if you ever need to boot into single user mode??? Not sure as I don't > use bash myself :) Anyone else care to share some comments on this? Thanks for the help Dru, Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 22:25:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21501.mail.yahoo.com (web21501.mail.yahoo.com [66.163.169.12]) by hub.freebsd.org (Postfix) with SMTP id 60E7937B416 for ; Sat, 4 May 2002 22:25:20 -0700 (PDT) Message-ID: <20020505052520.57840.qmail@web21501.mail.yahoo.com> Received: from [66.3.230.240] by web21501.mail.yahoo.com via HTTP; Sat, 04 May 2002 22:25:20 PDT Date: Sat, 4 May 2002 22:25:20 -0700 (PDT) From: Jeff Mitchell Subject: Re: A PPTP VPN success story To: freebsd-questions@freebsd.org In-Reply-To: <20020504144400.33409.qmail@web21501.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --- Jeff Mitchell wrote: > keywords: pptp vpn mpd ipfilter ipnat tunnel tunneling Windows 2000 > > Cool, it works! > > I have Windows 2000 pptp clients connecting at "maximum strength" > 128-bit encryption with MS-CHAPv2 authentication to a freebsd > 4.5-RELEASE-p4 box. > Some corrections: I didn't need to listen or redirect on port 47 at all. I just needed to pass out proto gre in addition to tcp/udp/icmp. mpd-1.8 is available. The examples show a way to specify multiple clients without much cutting and pasting. mpd-1.8 says it allows multiple clients behind one nat. regards, Jeff __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 22:53:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21509.mail.yahoo.com (web21509.mail.yahoo.com [66.163.169.58]) by hub.freebsd.org (Postfix) with SMTP id 7782937B41C for ; Sat, 4 May 2002 22:53:07 -0700 (PDT) Message-ID: <20020505055307.98091.qmail@web21509.mail.yahoo.com> Received: from [66.3.230.240] by web21509.mail.yahoo.com via HTTP; Sat, 04 May 2002 22:53:07 PDT Date: Sat, 4 May 2002 22:53:07 -0700 (PDT) From: Jeff Mitchell Subject: Will ipfilter stay in FreeBSD? To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hmmm I just stumbled upon some squabbling between Darren Reed and the OpenBSD team. ipfilter has already been gutted from OpenBSD. Does anyone forsee something similar with regard to FreeBSD? Please keep it in, ipfilter is great! regards, Jeff __________________________________________________ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 22:54:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from starbug.ugh.net.au (starbug.ugh.net.au [203.31.238.37]) by hub.freebsd.org (Postfix) with ESMTP id 50F7E37B41C for ; Sat, 4 May 2002 22:54:44 -0700 (PDT) Received: by starbug.ugh.net.au (Postfix, from userid 1000) id 51990A804; Sun, 5 May 2002 15:54:42 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by starbug.ugh.net.au (Postfix) with ESMTP id 502CD542D; Sun, 5 May 2002 15:54:42 +1000 (EST) Date: Sun, 5 May 2002 15:54:42 +1000 (EST) From: Andrew To: shubhamr Cc: "questions@FreeBSD.ORG" Subject: Re: such a pain In-Reply-To: <3CD4B6D2.9858CAE0@malkauns.nsc.com> Message-ID: <20020505155129.I53078-100000@starbug.ugh.net.au> X-WonK: *wibble* MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 5 May 2002, shubhamr wrote: > I have some .c files which I got from my windows machine.But when I read > it on BSD,for every line end ^M shows up,whereever there is a > newline(carriage return).It is tedious to remove them manually.I have no > X installed on my BSD.Can anyone suggest how to get rid of them? This is because windows/DOS ends lines in ASCII files with CR LF whereas UNIX only uses LF. Consequently you see the CR (^M) before each new line. There are many ways to remove or avoid them - a) if you are using FTP transfer the files in ASCII mode b) there are various versions of dos2unix et al floating around c) tr -d "\r" < file.c > newfile.c ...and many more... Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 23: 3:37 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spitfire.velocet.net (spitfire.velocet.net [216.138.223.227]) by hub.freebsd.org (Postfix) with ESMTP id 8F49637B400 for ; Sat, 4 May 2002 23:03:34 -0700 (PDT) Received: from wenk (H204.C233.tor.velocet.net [216.138.233.204]) by spitfire.velocet.net (Postfix) with SMTP id D8CB6FB4618 for ; Sun, 5 May 2002 02:03:32 -0400 (EDT) Message-ID: <000901c1f414$36f6ed00$b300a8c0@wenk> From: "Jeff Shevlen" To: Subject: mysql & ISP hostname Date: Sun, 5 May 2002 02:06:59 -0700 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have a question about ISP assigned hostnames and MySQL. I want to change how MySQL recognizes my machine in the mysql.user table. Say my machine's name is www.my.url. To initialize the remote login for root I did this: % mysqladmin -u root -h www -p password 'secretpassword' mysqladmin: connect to server at 'www' failed error: 'Host 'xxx.xxx.my.isp.net' is not allowed to connect to this MySQL server' Fine, so I went into mysql.user and changed every 'www' entry to 'xxx.xxx.my.isp.net'. Now: % mysqladmin -u root -h ''xxx.xxx.my.isp.net' -p password 'secretpassword' ... works: MySQL recognizes my machine's hostname. The problem is, as far as solutions go, this is a pretty inelegant. I have a static IP, and I have a FQDN, and I want to use these with MySQL for obvious reasons. I don't know how MySQL manages it's networking, but is there a way to change this behavior? Is there maybe some way to have MySQL do a DNS lookup (or use /etc/hosts somehow...) so I don't have to use the ISP's assigned name? Jeff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 23:10:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id 372F637B400 for ; Sat, 4 May 2002 23:10:46 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g456AdH06620 for freebsd-questions@FreeBSD.ORG; Sat, 4 May 2002 22:10:39 -0800 Message-Id: <200205050610.g456AdH06620@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: freebsd-questions@FreeBSD.ORG Subject: Re: How do I shut off auto-negotiation on my NIC Date: Sat, 4 May 2002 22:10:39 -0800 X-Mailer: KMail [version 1.3.2] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Friday 03 May 2002 09:59 am, Jeff Heath wrote: > I'm a newbie to BSD.  Installed 4.0 GENERIC on a Dell Optiplex with a 3Com > 3c905b Ethernet card. > > If I connect the BSD machine to my Cisco 2610 router.  It won't > auto-negotiate to 10MB half-duplex > > Also, if I connect the BSD machine to the Cisco 2610 router after it > negotiated to 10MB half-duplex, all is well. This is Cisco's fault. Their switches and routers just don't get along with many auto-negotiate nics. But I doub't 3com is blameless either. Often plugging a dumb hub beween the nic and the router will solve the problem. I think ifconfig does some of these tasks. -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 23:51:35 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id E83F537B41B for ; Sat, 4 May 2002 23:51:31 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g456pQI07020; Sat, 4 May 2002 22:51:26 -0800 Message-Id: <200205050651.g456pQI07020@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: "Jeff Shevlen" , Subject: Re: mysql & ISP hostname Date: Sat, 4 May 2002 22:51:26 -0800 X-Mailer: KMail [version 1.3.2] References: <000901c1f414$36f6ed00$b300a8c0@wenk> In-Reply-To: <000901c1f414$36f6ed00$b300a8c0@wenk> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 05 May 2002 01:06 am, Jeff Shevlen wrote: > I don't know how MySQL manages it's networking, but is there a way to > change this behavior?  Is there maybe some way to have MySQL do a DNS > lookup (or use /etc/hosts somehow...) so I don't have to use the ISP's > assigned name? If you have a static why would your isp assign your host name? Are you still required to use dhcp? (I've know a few ISPs that require everyone to use dhcp, and just make a table entry for static ips by mac address). If using dhcp, set the option that does NOT request a host name from your isp and just set your own. -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 23:53:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pen.homeip.net (72-17-237-24-cable.juneau.ak.net [24.237.17.72]) by hub.freebsd.org (Postfix) with ESMTP id 0F32537B400 for ; Sat, 4 May 2002 23:53:36 -0700 (PDT) Received: from localhost (localhost [[UNIX: localhost]]) by pen.homeip.net (8.11.6/8.11.6/SuSE Linux 0.5) id g456rXo07033; Sat, 4 May 2002 22:53:33 -0800 Message-Id: <200205050653.g456rXo07033@pen.homeip.net> Content-Type: text/plain; charset="iso-8859-1" From: John Andersen Reply-To: jsa@pen.homeip.net To: ecerejo@zapo.net, freebsd-questions@FreeBSD.ORG Subject: Re: Questions not showing up Date: Sat, 4 May 2002 22:53:33 -0800 X-Mailer: KMail [version 1.3.2] References: <200205041711.24158.ecerejo@zapo.net> In-Reply-To: <200205041711.24158.ecerejo@zapo.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Saturday 04 May 2002 01:11 pm, E. J. Cerejo wrote: > What's going on in here, I can't post a question with a copy of my rc.conf > file and a copy of the ifconfig results! It won't go through using kmail > and if I use a webmail it will send but it won't show up. Is something > being blocked? Well that one made it, didn't it. Did you send them as attachments? Many lists kill messages with attachments. Paste them in-line. -- _________________________________________________ No I Don't Yahoo! And I'm getting pretty sick of being asked if I do. _________________________________________________ John Andersen / Juneau Alaska To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat May 4 23:55:36 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mplspop6.mpls.uswest.net (mplspop6.mpls.uswest.net [204.147.80.9]) by hub.freebsd.org (Postfix) with SMTP id 1177937B41C for ; Sat, 4 May 2002 23:55:12 -0700 (PDT) Received: (qmail 42500 invoked from network); 5 May 2002 06:55:11 -0000 Received: from unknown (HELO jenny) (63.231.238.225) by mplspop6.mpls.uswest.net with SMTP; 5 May 2002 06:55:11 -0000 Date: Sun, 5 May 2002 02:05:48 -0500 Message-ID: From: "Maildrop" To: "Jeff Mitchell" , shubhamr@malkauns.nsc.com, "questions@FreeBSD.ORG" Subject: RE: such a pain MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20020505050051.60490.qmail@web21502.mail.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Also besides the methods alright stated, there is a program in "ports" projected called "dos2unix" (or "unix2dos", I forget). After you have it installed, do a: dos2unix blah.c > /tmp/blah.c mv /tmp/blah.c ./blah.c you could even create a script like the one I use: #!/bin/sh dos2unix $1 > /tmp/.tmpfile.c cp /tmp/.tmpfile.c ./$1 Call it something like convert.sh and run it like this: convert.sh filename.c than just do `vi filename.c` and all the ^M's are gone. Regards, Jack > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jeff Mitchell > Sent: Sunday, May 05, 2002 12:01 AM > To: shubhamr@malkauns.nsc.com; questions@FreeBSD.ORG > Subject: Re: such a pain > > > > --- shubhamr wrote: > > Hi, > > I have some .c files which I got from my windows machine.But when I > > read > > it on BSD,for every line end ^M shows up,whereever there is a > > newline(carriage return).It is tedious to remove them manually.I have > > no > > X installed on my BSD.Can anyone suggest how to get rid of them? > > > > shubha > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > perl -p -i -e 's(\015\012)(\012)' file1 file2 file3 ... > > Regards, > Jeff > > > > > > __________________________________________________ > Do You Yahoo!? > Yahoo! Health - your guide to health and wellness > http://health.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message