Date: Mon, 16 Jun 2003 20:05:42 +0200 From: Andreas Burmester <andreas.burmester@chello.se> To: firewire@freebsd.org Subject: iPod problems Message-ID: <200306162005.42255.andreas.burmester@chello.se>
next in thread | raw e-mail | index | archive | help
Hi all
Im trying to get my iPod v2 15GB to work in FreeBSD 5.1 but have runned into
some problems.
It detects my iPod when I connect and dissconnect it without any problems.
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:000a2700020da515
da0 at sbp0 bus 0 target 0 lun 0
da0: <Apple Co iPod 2700> Removable Simplified Direct Access SCSI-2 device
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 14305MB (29297520 512 byte sectors: 255H 63S/T 1823C)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=3, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
But I get this when I try to mount it.
gandalf# mount -t hfs /dev/da0
da0% da0s1% da0s2% da0s3%
gandalf# mount -t hfs /dev/da0s1 /mnt/
hfs: /dev/da0s1: Invalid argument
gandalf# mount -t hfs /dev/da0s2 /mnt/
hfs: /dev/da0s2: Invalid argument
gandalf# mount -t hfs /dev/da0s3 /mnt/
hfs: /dev/da0s3: Invalid argument
hfs: mount: sig 0x4d50 and version 0x0 are not HFS or HFS+.
hfs: mount: sig 0x0 and version 0x0 are not HFS or HFS+.
I'm using the GENERIC kernel with the only addition
options GEOM_APPLE # Apple partitioning
Its a MAC iPod and its has been connected and loaded from a Powerbook.
Thanks in advanced.
-Andreas
My demsg...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Mon Jun 16 19:15:27 CEST 2003
root@gandalf.chello.se:/usr/src/sys/i386/compile/GANDALF
Preloaded elf kernel "/boot/kernel/kernel" at 0xc087e000.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc087e1f4.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc087e2a0.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc087e34c.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc087e3f8.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc087e4a8.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc087e554.
Preloaded elf module "/boot/kernel/hfs.ko" at 0xc087e600.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc087e6a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1396507318 Hz
CPU: AMD Athlon(tm) XP 1600+ (1396.51-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 512270336 (488 MB)
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SOYO AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdee0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 MX 100/200> mem 0xe0000000-0xe7ffffff,0xec000000-0xecffffff
irq 11 at device 0.0 on pci1
fwohci0: <Texas Instruments TSB43AB23> mem
0xef020000-0xef023fff,0xef025000-0xef0257ff irq 10 at device 9.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:95:00:a0:01:cd:bf
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:95:01:cd:bf
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
bktr0: <BrookTree 878> mem 0xef026000-0xef026fff irq 5 at device 11.0 on pci0
bktr0: Warning - card vendor 0xffff (model 0xa1ff) unknown.
bktr0: Pinnacle/Miro TV, Philips PAL I tuner.
pci0: <multimedia> at device 11.1 (no driver attached)
atapci0: <Promise PDC20265 UDMA100 controller> port
0xd000-0xd03f,0xcc00-0xcc03,0x1800-0x1807,0xc400-0xc403,0x1000-0x1007 mem
0xef000000-0xef01ffff irq 10 at device 13.0 on pci0
ata2: at 0x1000 on atapci0
ata3: at 0x1800 on atapci0
pcm0: <CMedia CMI8738> port 0xd400-0xd4ff irq 11 at device 14.0 on pci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0xd800-0xd80f at device 17.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
0xef027000-0xef0270ff irq 11 at device 18.0 on pci0
vr0: Ethernet address: 00:50:2c:04:31:d0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <Option ROMs> at iomem 0xd0000-0xd1fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master UDMA100
ad1: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-slave UDMA100
ad4: 76319MB <WDC WD800BB-40BSA0> [155061/16/63] at ata2-master UDMA100
ad5: 114440MB <WDC WD1200JB-75CRA0> [232514/16/63] at ata2-slave UDMA100
acd0: CD-RW <_NEC NR-7500A> at ata1-master PIO4
acd1: CDROM <Pioneer CD-ROM ATAPI Model DR-744 0102> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
nvidia: rebuild nvidia.ko for FreeBSD AGPGART support.
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:000a2700020da515
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
da0 at sbp0 bus 0 target 0 lun 0
da0: <Apple Co iPod 2700> Removable Simplified Direct Access SCSI-2 device
da0: 50.000MB/s transfers, Tagged Queueing Enabled
da0: 14305MB (29297520 512 byte sectors: 255H 63S/T 1823C)
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
hfs: mount: sig 0x4d50 and version 0x0 are not HFS or HFS+.
hfs: mount: sig 0x0 and version 0x0 are not HFS or HFS+.
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=3, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: BUS reset
fwohci0: node_id=0x8800ffc0, gen=4, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
firewire0: root node is not cycle master capable
firewire0: bus manager 0 (me)
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
sbp0:0:0 No additional information to report
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200306162005.42255.andreas.burmester>