From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 16:04:03 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7F10316A4CE for ; Sun, 28 Nov 2004 16:04:03 +0000 (GMT) Received: from server1.ewido.net (server1.ewido.net [62.146.43.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id ED1C743D4C for ; Sun, 28 Nov 2004 16:04:02 +0000 (GMT) (envelope-from paul@ewido.net) Received: from bbox (p54871C4A.dip.t-dialin.net [84.135.28.74]) by server1.ewido.net (Postfix) with ESMTP id E5DA04A8025 for ; Sun, 28 Nov 2004 17:04:00 +0100 (CET) To: freebsd-mobile@freebsd.org From: Paul Kaletta Date: Sun, 28 Nov 2004 17:03:50 +0100 Message-ID: <86is7qot95.fsf@ewido.net> User-Agent: Gnus/5.1006 (Gnus v5.10.6) XEmacs/21.4 (Reasonable Discussion, berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 16:04:03 -0000 Hi, I think that I'll buy a Laptop soon. I haven't made up my mind yet, but I think that I might buy a Dell, since they're so cheap and I haven't heard many bad things. Those Notebooks come with Windows preinstalled, but I'd like to run FreeBSD if it's possible. Has anyone any experience with them? Is all of the build-in hardware supported? What about accelerated video? There is some choice about different displays, and some of them have very very high resolutions like 1600x1200 on a 15"-screen. Is such a display usable under X? And another very important question: I wanted to play around with audio-software, so how good is the build-in audio-card? Especially I would like to know whether Dell-Notebooks have an line-in, since I'm not certain from the descriptions on the web-site. Also: is the audio-output very noisy or can I use the line in for any recordings? (I don't need very high quality, but I'd like to record myself playing guitar and use that as background-music for improvisations). If it's not feasible to use the build-in hardware, can I use external audio-hardware with FreeBSD? Like pc-card or USB soundcards? I'm not entirely sure, but I think that the wlan hardware kinda works, even if I have to use ndisulator, right? Is there any hope that I don't have use it one day? Sorry that I asked so many questions in one mail, but they really only concern Dell-Notebooks, so someone who has a recent model could probably give me some hints. Thanks Paul From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 16:13:58 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5A5B016A4CE for ; Sun, 28 Nov 2004 16:13:58 +0000 (GMT) Received: from smtpq3.home.nl (smtpq3.home.nl [213.51.128.198]) by mx1.FreeBSD.org (Postfix) with ESMTP id DF0B543D46 for ; Sun, 28 Nov 2004 16:13:57 +0000 (GMT) (envelope-from freebsd@mhueck.demon.nl) Received: from [213.51.128.136] (port=37731 helo=smtp5.home.nl) by smtpq3.home.nl with esmtp (Exim 4.30) id 1CYRgS-0003sL-FQ for freebsd-mobile@freebsd.org; Sun, 28 Nov 2004 17:13:56 +0100 Received: from cc731484-a.groni1.gr.home.nl ([217.120.199.34]:1829 helo=me) by smtp5.home.nl with esmtp (Exim 4.30) id 1CYRgR-00047s-Hl for freebsd-mobile@freebsd.org; Sun, 28 Nov 2004 17:13:55 +0100 From: "M. Hueck" To: Date: Sun, 28 Nov 2004 17:11:55 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Thread-Index: AcTVY+ol8E9Q4vZuRhaoYN6Ry2LyEgAAA2yg In-Reply-To: <86is7qot95.fsf@ewido.net> X-AtHome-MailScanner-Information: Neem contact op met support@home.nl voor meer informatie X-AtHome-MailScanner: Found to be clean Message-Id: <20041128161357.DF0B543D46@mx1.FreeBSD.org> Subject: RE: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 16:13:58 -0000 ... > Has anyone any experience with them? > Is all of the build-in hardware supported? What about accelerated video? I'm using an Inspiron 8200 with a nvidia card and the nvidia driver works fine. > There is some choice about different displays, and some of them have > very very high resolutions like 1600x1200 on a 15"-screen. Is such a > display usable under X? I'm using a 1600x1200 15" screen right now with X and its definitely usable, not too small at all, and _VERY_ sharp. > And another very important question: ... > Especially I would like to know whether Dell-Notebooks have > an line-in, since I'm not certain from the descriptions on the web-site. My 8200 has a line-in and a mic-in. > Also: is the audio-output very noisy or can I use the line in for any > recordings? (I don't need very high quality, but I'd like to record > Myself playing guitar and use that as background-music for > improvisations). Audio quality is decent, but not great. ... > I'm not entirely sure, but I think that the wlan hardware kinda works, > even if I have to use ndisulator, right? Is there any hope that I don't > have use it one day? I have had the 54 mbit mini-pci card working under linux with ndiswrapper. I'd say the same should be possible in FreeBSD, but I yet have to try to get it to work. M. Hueck From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 16:31:23 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 04C0F16A4CE for ; Sun, 28 Nov 2004 16:31:23 +0000 (GMT) Received: from mail.heidt.nl (195-241-125-89-mx.xdsl.tiscali.nl [195.241.125.89]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4B02543D5C for ; Sun, 28 Nov 2004 16:31:22 +0000 (GMT) (envelope-from rixk@heidt.nl) Received: from localhost (localhost.heidt.nl [127.0.0.1]) by mail.heidt.nl (Postfix) with ESMTP id 14F71D4C8B for ; Sun, 28 Nov 2004 17:31:21 +0100 (CET) Received: from mail.heidt.nl ([127.0.0.1]) by localhost (mail.heidt.nl [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 03956-01 for ; Sun, 28 Nov 2004 17:31:19 +0100 (CET) Received: from 192.168.2.76 (unknown [192.168.2.76]) by mail.heidt.nl (Postfix) with ESMTP id 548E2D4C84 for ; Sun, 28 Nov 2004 17:31:19 +0100 (CET) From: Rixk Heidt To: freebsd-mobile@freebsd.org In-Reply-To: <20041128161357.DF0B543D46@mx1.FreeBSD.org> References: <20041128161357.DF0B543D46@mx1.FreeBSD.org> Content-Type: text/plain Date: Sun, 28 Nov 2004 17:28:02 +0100 Message-Id: <1101659282.6321.8.camel@Dell.heidt.nl> Mime-Version: 1.0 X-Mailer: Evolution 2.0.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new at mail.heidt.nl Subject: RE: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 16:31:23 -0000 On Sun, 2004-11-28 at 17:11 +0100, M. Hueck wrote: > ... > > Has anyone any experience with them? > > Is all of the build-in hardware supported? What about accelerated video? > > I'm using an Inspiron 8200 with a nvidia card and the nvidia driver works > fine. > I have an Inspiron 8500 and using the Nvidia driver at a resolution of 1680x1050 (widescreen). > > There is some choice about different displays, and some of them have > > very very high resolutions like 1600x1200 on a 15"-screen. Is such a > > display usable under X? > > I'm using a 1600x1200 15" screen right now with X and its definitely usable, > not too small at all, and _VERY_ sharp. > > > And another very important question: > ... > > > Especially I would like to know whether Dell-Notebooks have > > an line-in, since I'm not certain from the descriptions on the web-site. > > My 8200 has a line-in and a mic-in. However the I8500 does NOT have a line-in, only a mic-in. I'm a bit disappointed at that, especially since it is supposed to be a multi-media laptop. > > > Also: is the audio-output very noisy or can I use the line in for any > > recordings? (I don't need very high quality, but I'd like to record > > Myself playing guitar and use that as background-music for > > improvisations). > > Audio quality is decent, but not great. > > ... > > > I'm not entirely sure, but I think that the wlan hardware kinda works, > > even if I have to use ndisulator, right? Is there any hope that I don't > > have use it one day? > > I have had the 54 mbit mini-pci card working under linux with ndiswrapper. > I'd say the same should be possible in FreeBSD, but I yet have to try to get > it to work. I'm using a TrueMobile 1150 WiFi card which works fine with the Wavelan driver (wi). I'm still looking into infrared support though... (I would really like to sync my Nokia with Evolution or something). > > M. Hueck > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 17:05:20 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F24516A4CE for ; Sun, 28 Nov 2004 17:05:20 +0000 (GMT) Received: from parallax.alastria.net (parallax.alastria.net [84.243.240.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id 01C0A43D4C for ; Sun, 28 Nov 2004 17:05:19 +0000 (GMT) (envelope-from peter@alastria.net) Received: from [10.2.0.1] (shuttle.cw9.co.uk [82.152.14.18]) (authenticated bits=0)iASH5El1003757 for ; Sun, 28 Nov 2004 17:05:14 GMT (envelope-from peter@alastria.net) Message-ID: <41AA054C.6070904@alastria.net> Date: Sun, 28 Nov 2004 17:05:16 +0000 From: Peter Wood Organization: Alastria Networks User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Flag: NO X-Virus-Status: No X-Spam-Score: 0 () X-Spam-Ultra-Flag: NO X-Spam-Low-Flag: NO X-Spam-Flag: NO X-Spam-High-Flag: NO X-Scanned-By: MIMEDefang 2.42 Subject: Thanks and a Sony Ericsson GC75 under FreeBSD 5.3-RELEASE-p1 X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 17:05:20 -0000 Good Afternoon, I have a Toshiba Satellite Pro A10 very happily running FreeBSD 5.3, video, audio, network, all happily working. I haven't tried the built in modem, but I have a feeling it's a WinModem and therefore a lost cause. Many many thanks to everyone who puts in the work for getting FreeBSD laptop friendly. I'm very happy with it now running X11 for the novices who end up using my laptop (one of the primary reasons I didn't want Windows). I'm having an issue which I didn't have with FreeBSD 4.X with my GSM/GPRS card which is an OEM version of the Sony Ericsson GC75. I've seen two other people report this fault on various mailing lists, but sadly never saw any success stories. Essentially on 5.3 when you insert the GC75 it says "pccard1: Card has no functions!" and "ccb1: PC Card card activation failed". On 4.X the card was detected for what it is and was assigned sio4, cuaa4 and the people did feast. I should note that countless other cards work with it, a Toshiba PCMCIA 2Gb HD, a Netgear PRISM2 wireless card (which didn't used to work on 4.X while the laptop has the Dell card in, but does now, bsd-airtools here I come ;), a normal analog modem card (just appears as sio0), 3com network card. I've had a play to the best of my knowledge about PCMCIA (which could be written on the back of a postage stamp) and I've had no success. I was woundering if anyone could suggest anything, as this is the last hurdle and I'll be in an utopia. With "boot -v" (and all the sysctl pccard/ccb/cis debugs to 1) on inserting the GC75 I get the following: Status is 0x30001811 cbb1: card inserted: event=0x00000000, state=30001811 pccard1: chip_socket_enable cbb_pcic_socket_enable: cbb1: cbb_power: 2V pccard1: read_cis pcib1: device pccard1 requested decoded memory range 0xcfe00000-0xcfefffff cis mem map 0xddf37000 (resource: 0xcfe10000) pccard1: CIS tuple chain: CISTPL_END ff cis mem map ddf37000 CISTPL_LINKTARGET expected, code ff observed pccard1: check_cis_quirks pccard1: Card has no functions! cbb1: PC Card card activation failed If I understand this right, it's claiming it's reading the CIS table which is ending and saying it has no functions. Could it be reading the wrong CIS table (or offset through it), or something that isn't even a CIS table? This machine also has a Dell TrueMobile 1150 (802.11b) MINIPCI card in it which installs a Texas Instruments PCMCIA controller for the wi0 card, hence pccard1 I assume. I have tried removing this card, but alas still the same. I've included the full boot -v, as well pciconf -v -l. I really hope someone out there has an idea, as I'd love this to work :). Many thanks in advance and thanks again to thoose who work on getting FreeBSD into the laptop world :). As always with my FreeBSD woes, if you need any more information I'm happy to oblige. Root shell access can be arranged for thoose who are part of the fBSD project. Cheers, Pete. dmesg (boot -v hw.*.*_debug=1): Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p1 #0: Thu Nov 25 01:33:42 UTC 2004 pa@cobalt.cw9.co.uk:/usr/obj/usr/src/sys/COBALT Preloaded elf kernel "/boot/kernel/kernel" at 0xc083e000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083e318. Calibrating clock(s) ... i8254 clock: 1193175 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2194507124 Hz CPU: Mobile Intel(R) Celeron(R) CPU 2.20GHz (2194.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff real memory = 519307264 (495 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001e65afff, 497242112 bytes (121397 pages) avail memory = 498507776 (475 MB) bios32: Found BIOS32 Service Directory header at 0xc00f0220 bios32: Entry = 0xfc03d (c00fc03d) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd317 pnpbios: Found PnP BIOS data at 0xc00f0410 pnpbios: Entry = f0000:9138 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID e938f351 Other BIOS signatures found: wlan: <802.11 Link Layer> random: mem: Pentium Pro MTRR support enabled io: null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 Found $PIR table, 6 entries at 0xc00f01a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x60 10 embedded 0 31 A 0x62 11 embedded 0 31 B 0x61 11 embedded 0 29 A 0x60 10 embedded 0 29 D 0x6b 11 embedded 1 11 A 0x63 11 embedded 1 8 A 0x68 11 embedded 1 10 A 0x63 11 embedded 1 10 B 0x6a 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 30 func 0 acpi0: [MPSAFE] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0 cpu0: on acpi0 acpi_tz0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [10] 10+ low,level,sharable 0.2.0 \\_SB_.LNKA irq 0: [10] 10+ low,level,sharable 0.29.0 \\_SB_.LNKH irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 0.29.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 0.31.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x01 bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x01 bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 1, range 32, base d0000000, size 19, enabled map[18]: type 4, range 32, base 0000eff8, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA) pcib0: possible interrupts: 10 ACPI PCI link arbitrated settings: \\_SB_.LNKH (references 1, priority 3371): interrupts: 11 5 7 6 4 3 penalty: 30 80 5030 5030 5030 5030 \\_SB_.LNKC (references 1, priority 3371): interrupts: 11 5 7 6 4 3 penalty: 30 80 5030 5030 5030 5030 \\_SB_.LNKB (references 1, priority 3371): interrupts: 11 5 7 6 4 3 penalty: 30 80 5030 5030 5030 5030 \\_SB_.LNKA (references 2, priority 40): interrupts: 10 penalty: 20 pcib0: slot 2 INTA routed to irq 10 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x01 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base f8000000, size 27, memory disabled map[14]: type 1, range 32, base fff80000, size 19, memory disabled found-> vendor=0x8086, dev=0x3582, revid=0x01 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 0000cfe0, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA) pcib0: slot 29 INTA is already routed to irq 10 found-> vendor=0x8086, dev=0x24c2, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 1, range 32, base cffffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH) pcib0: possible interrupts: 3 4 5 6 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKH (references 1, priority 3401): interrupts: 11 5 7 6 4 3 penalty: 60 110 5060 5060 5060 5060 \\_SB_.LNKC (references 1, priority 3401): interrupts: 11 5 7 6 4 3 penalty: 60 110 5060 5060 5060 5060 \\_SB_.LNKB (references 1, priority 3401): interrupts: 11 5 7 6 4 3 penalty: 60 110 5060 5060 5060 5060 pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bfa0, size 4, enabled pcib0: matched entry for 0.31.INTA (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 6 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 1, priority 3433): interrupts: 11 5 7 6 4 3 penalty: 100 140 5090 5090 5090 5090 \\_SB_.LNKB (references 1, priority 3433): interrupts: 11 5 7 6 4 3 penalty: 100 140 5090 5090 5090 5090 pcib0: slot 31 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000be00, size 8, enabled map[14]: type 4, range 32, base 0000bdc0, size 6, enabled map[18]: type 1, range 32, base cfdffe00, size 9, enabled map[1c]: type 1, range 32, base cfdffd00, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: possible interrupts: 3 4 5 6 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 1, priority 3465): interrupts: 11 5 7 6 4 3 penalty: 140 170 5120 5120 5120 5120 pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ba00, size 8, enabled map[14]: type 4, range 32, base 0000b980, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 pci0: at device 0.1 (no driver attached) pci0: at device 0.3 (no driver attached) agp0: port 0xeff8-0xefff mem 0xd0000000-0xd007ffff,0xd8000000-0xdfffffff irq 10 at device 2.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd8000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xd0000000 agp0: detected 16252k stolen memory agp0: aperture size is 128M pci0: at device 2.1 (no driver attached) uhci0: port 0xcfe0-0xcfff irq 10 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcfe0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib1: at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xcfe00000-0xcfefffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.LNKE irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 1.8.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 1.10.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 1.10.1 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 11] 11+ low,level,sharable 1.11.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base cfeff000, size 12, enabled pcib1: device (null) requested decoded memory range 0xcfeff000-0xcfefffff map[14]: type 4, range 32, base 0000cf40, size 6, enabled pcib1: device (null) requested decoded I/O range 0xcf40-0xcf7f pcib1: matched entry for 1.8.INTA (src \\_SB_.LNKE) pcib1: possible interrupts: 3 4 5 6 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 2, priority 7093): interrupts: 11 5 7 6 4 3 penalty: 230 250 5200 5200 5200 5200 \\_SB_.LNKE (references 1, priority 3546): interrupts: 11 5 7 6 4 3 penalty: 230 250 5200 5200 5200 5200 \\_SB_.LNKG (references 1, priority 3546): interrupts: 11 5 7 6 4 3 penalty: 230 250 5200 5200 5200 5200 pcib1: slot 8 INTA routed to irq 11 via \\_SB_.LNKE found-> vendor=0x8086, dev=0x103d, revid=0x83 bus=1, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=1, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled pcib1: matched entry for 1.11.INTA (src \\_SB_.LNKD) pcib1: possible interrupts: 3 4 5 6 7 11 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 2, priority 7256): interrupts: 11 5 7 6 4 3 penalty: 320 330 5280 5280 5280 5280 \\_SB_.LNKG (references 1, priority 3628): interrupts: 11 5 7 6 4 3 penalty: 320 330 5280 5280 5280 5280 pcib1: slot 11 INTA routed to irq 11 via \\_SB_.LNKD found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=1, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 fxp0: port 0xcf40-0xcf7f mem 0xcfeff000-0xcfefffff irq 11 at device 8.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xcfeff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 103d 1179 0001 0083 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:08:0d:9b:7f:34 fxp0: [MPSAFE] cbb0: at device 10.0 on pci1 pcib1: device cbb0 requested decoded memory range 0xcfe00000-0xcfefffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xcfe00000 cbb0: Found memory at cfe00000 cbb0: Secondary bus is 2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 1.10.INTA (src \\_SB_.LNKD) pcib1: slot 10 INTA is already routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac50104c 0x02100007 0x06070001 0x00024008 0x10: 0xcfe00000 0x020000a0 0x20020201 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00449060 0x00000000 0x00000000 0x01000002 0x90: 0x616001c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000080f 0x0000001b 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: irq 11 at device 11.0 on pci1 pcib1: device cbb1 requested decoded memory range 0xcfe00000-0xcfefffff cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xcfe01000 cbb1: Found memory at cfe01000 cbb1: Secondary bus is 3 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x060a1179 0x04900007 0x06070007 0x00024000 0x10: 0xcfe01000 0x04800080 0x00030301 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00010001 0x00800000 0x00000000 0x01000000 0x90: 0x00000001 0x00000000 0x00000000 0x00000000 0xa0: 0x860010f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x14010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] pcm0: port 0xbdc0-0xbdff,0xbe00-0xbeff mem 0xcfdffd00-0xcfdffdff,0xcfdffe00-0xcfdfffff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbe00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbdc0 pcm0: [GIANT-LOCKED] pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 1e138000, 4000; 0xdce11000 -> 1e138000 pcm0: sndbuf_setmap 1e134000, 4000; 0xdce15000 -> 1e134000 pci0: at device 31.6 (no driver attached) acpi_lid0: on acpi0 acpi_cmbat0: on acpi0 acpi_button0: on acpi0 acpi_acad0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xe0000-0xeffff,0xc0000-0xcffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2194507124 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times Status is 0x30000911 cbb0: card inserted: event=0x00000000, state=30000911 pccard0: chip_socket_enable cbb_pcic_socket_enable: cbb0: cbb_power: 3V pccard0: read_cis Status is 0x30000007 ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:39070017 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 20003848704 end 20003880959 GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911 GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823 GEOM: Configure ad0s1c, start 0 length 20003848704 end 20003848703 GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735 GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647 GEOM: Configure ad0s1f, start 2147483648 length 17856365056 end 20003848703 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting UDMA33 on Intel ICH4 chip acd0: DVDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 192KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 80mm data disc pcm0: measured ac97 link rate at 47998 Hz, will use 48000 Hz pcib1: device pccard0 requested decoded memory range 0xcfe00000-0xcfefffff cis mem map 0xddf33000 (resource: 0xcfe10000) pccard0: CIS tuple chain: CISTPL_DEVICE type=null speed=null 01 03 00 00 ff CISTPL_DEVICE_A type=sram speed=ext 17 04 67 5a 08 ff unhandled CISTPL 1c 1c 04 02 00 00 ff unhandled CISTPL 1d 1d 05 03 67 5a 08 ff CISTPL_VERS_1 15 50 05 00 44 65 6c 6c 00 54 72 75 65 4d 6f 62 69 6c 65 20 31 31 35 30 20 53 65 72 69 65 73 20 50 43 20 43 61 72 64 00 56 65 72 73 69 6f 6e 20 30 31 2e 30 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff CISTPL_MANFID 20 04 56 01 02 00 CISTPL_FUNCID 21 02 06 00 CISTPL_FUNCE 22 02 01 07 CISTPL_FUNCE 22 05 02 40 42 0f 00 CISTPL_FUNCE 22 05 02 80 84 1e 00 CISTPL_FUNCE 22 05 02 60 ec 53 00 CISTPL_FUNCE 22 05 02 c0 d8 a7 00 CISTPL_FUNCE 22 02 03 07 CISTPL_FUNCE 22 08 04 06 00 02 2d 33 d6 83 CISTPL_FUNCE 22 02 05 01 CISTPL_CONFIG 1a 07 03 01 e0 03 00 00 01 CISTPL_CFTABLE_ENTRY 1b 10 c1 01 19 77 b5 1e 35 b5 3c 36 36 05 46 7f ff ff CISTPL_END ff cis mem map ddf33000 CISTPL_LINKTARGET expected, code 00 observed pccard0: check_cis_quirks pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: Dell, TrueMobile 1150 Series PC Card, Version 01.01, pccard0: Manufacturer code 0x156, product 0x2 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel pccard0: functions scanning pccard0: Card has 1 functions. pccard_mfc is 0 pccard0: I/O rid 0 start 0 end ffffffff pcib1: device pccard0 requested decoded I/O range 0xc000-0xcfff cbb_pcic_socket_enable: cbb0: cbb_power: 0V cbb0: cbb_power: 3V pcib1: device pccard0 requested decoded memory range 0xcfe00000-0xcfefffff pccard0: ccr_res == cfe02000-cfe023ff, base=3e0 pccard0: function 0 CCR at 0 offset 3e0: 41 80 22 ff, ff ff ff ff, ff wi0: at port 0xc000-0xc03f irq 11 function 0 config 1 on pccard0 pcib1: device wi0 requested decoded I/O range 0xc000-0xc03f pcib1: device pccard0 requested decoded I/O range 0xc000-0xc03f pcib1: device wi0 requested decoded I/O range 0xc000-0xc03f wi0: [MPSAFE] wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (8.72.1) wi0: bpf attached wi0: Ethernet address: 00:02:2d:33:d6:83 wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached pccard0: function 0 CCR at 0 offset 3e0 mask 1: 41 80 22 ff, ff ff ff ff, ff Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init pciconf -v -l: hostb0@pci0:0:0: class=0x060000 card=0x00011179 chip=0x35808086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface Bridge' class = bridge subclass = HOST-PCI none0@pci0:0:1: class=0x088000 card=0x00011179 chip=0x35848086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory Controller' class = base peripheral none1@pci0:0:3: class=0x088000 card=0x00011179 chip=0x35858086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process' class = base peripheral agp0@pci0:2:0: class=0x030000 card=0x00021179 chip=0x35828086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display subclass = VGA none2@pci0:2:1: class=0x038000 card=0x00021179 chip=0x35828086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display uhci0@pci0:29:0: class=0x0c0300 card=0x00011179 chip=0x24c28086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1' class = serial bus subclass = USB none3@pci0:29:7: class=0x0c0320 card=0x00011179 chip=0x24cd8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB EHCI Controller' class = serial bus subclass = USB pcib1@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x00011179 chip=0x24ca8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA pcm0@pci0:31:5: class=0x040100 card=0x02411179 chip=0x24c58086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' class = multimedia subclass = audio none4@pci0:31:6: class=0x070300 card=0x00011179 chip=0x24c68086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' class = simple comms fxp0@pci1:8:0: class=0x020000 card=0x00011179 chip=0x103d8086 rev=0x83 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB (ICH4) PRO/100 VE Network Connection' class = network subclass = ethernet cbb0@pci1:10:0: class=0x060700 card=0xab0112a3 chip=0xac50104c rev=0x01 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1410 PC card cardBus Controller' class = bridge subclass = PCI-CardBus cbb1@pci1:11:0: class=0x060700 card=0x00011179 chip=0x060a1179 rev=0x07 hdr=0x02 vendor = 'Toshiba America Information Systems' device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller' class = bridge subclass = PCI-CardBus -- Peter Wood :: :: Tel +44 7974 799440 From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 17:36:24 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0157D16A4CE for ; Sun, 28 Nov 2004 17:36:24 +0000 (GMT) Received: from cheese.thcproductions.com (cheese.thcproductions.com [65.65.124.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id AEF8843D58 for ; Sun, 28 Nov 2004 17:36:23 +0000 (GMT) (envelope-from tenebrae@thcproductions.com) Received: from localhost.thcproductions.com ([127.0.0.1]) by cheese.thcproductions.com with esmtp (Exim 4.42) id I7WGWI-0003FZ-ER for freebsd-mobile@freebsd.org; Sun, 28 Nov 2004 11:36:23 -0600 Message-ID: <41AA0C8D.2070805@thcproductions.com> Date: Sun, 28 Nov 2004 11:36:13 -0600 From: tenebrae User-Agent: Mail Client (compatible; E-MAIL; Why are you reading this?) - Mail Client, Platform X-Accept-Language: en-us, en MIME-Version: 1.0 Cc: freebsd-mobile@freebsd.org References: <86is7qot95.fsf@ewido.net> In-Reply-To: <86is7qot95.fsf@ewido.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scan-Signature: 97f0ab3729775fe6e111a3210d394cad X-Spam-Score: 0.0 Subject: Re: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: tenebrae@thcproductions.com List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 17:36:24 -0000 Paul Kaletta wrote: >There is some choice about different displays, and some of them have >very very high resolutions like 1600x1200 on a 15"-screen. Is such a >display usable under X? > > Dell Inspiron XPS w/ Mobility Radeon 9700 running the LCD in its native 1920x1200 using the x.org radeon driver. It's beautiful. >I wanted to play around with audio-software, so how good is the build-in >audio-card? > > The built-in audio is nothing to write home to mom about, so to speak, but the only audio I ever do on a un*x box (not including my Mac, which is my platform of choice for audio editing and multitrack recording) is playing mp3s or listening to cds. I don't use WLAN, so I can't speak to that. It's just not fast enough for moving around large (500+ MB) audio files. Thankfully, the built-in gig ethernet adapter is better suited for that task. HTH. -W From owner-freebsd-mobile@FreeBSD.ORG Sun Nov 28 19:22:16 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4175D16A4CE for ; Sun, 28 Nov 2004 19:22:16 +0000 (GMT) Received: from sccmmhc91.asp.att.net (sccmmhc91.asp.att.net [204.127.203.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id DB7FA43D55 for ; Sun, 28 Nov 2004 19:22:15 +0000 (GMT) (envelope-from stephen@math.missouri.edu) Received: from [10.0.0.4] (12-216-243-9.client.mchsi.com[12.216.243.9]) by sccmmhc91.asp.att.net (sccmmhc91) with ESMTP id <20041128192214m9100ce642e>; Sun, 28 Nov 2004 19:22:14 +0000 Message-ID: <41AA2565.7060504@math.missouri.edu> Date: Sun, 28 Nov 2004 13:22:13 -0600 From: Stephen Montgomery-Smith User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.3) Gecko/20041116 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org References: <86is7qot95.fsf@ewido.net> <41AA0C8D.2070805@thcproductions.com> In-Reply-To: <41AA0C8D.2070805@thcproductions.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Nov 2004 19:22:16 -0000 I have a Dell Latitude D800 under FreeBSD 5.3. This Dell was, I think, not quite the latest as I bought it on sale. The GeForce FX Go5200 with the 1680x1050 screen (I think that I have the older version of the screen) works well with the nv driver, although I had to do some googling to find the mode line for that resolution. I could never get the nvidia driver to work - it would always make the computer freeze, although someone else told me that they could get it to work with FreeBSD 4.x. The sound works, but I haven't listened to it enough to decide if it is really good. The Dell TrueMobile 1300 WLAN Mini-PCI Card works somewhat with the ndis0 driver, but the only way to get it to work is to put the appropriate commands in /etc/rc.conf and reboot - I haven't found a way to make it work without the reboot. But with the reboot I was able to get it to work. Overall a pleasant experience, but the road wasn't totally smooth in getting it to work. Stephen From owner-freebsd-mobile@FreeBSD.ORG Mon Nov 29 05:11:00 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A276F16A4CE for ; Mon, 29 Nov 2004 05:11:00 +0000 (GMT) Received: from mproxy.gmail.com (mproxy.gmail.com [216.239.56.243]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0759443D3F for ; Mon, 29 Nov 2004 05:08:17 +0000 (GMT) (envelope-from anishbabu.pillai@gmail.com) Received: by mproxy.gmail.com with SMTP id w41so216747cwb for ; Sun, 28 Nov 2004 21:07:45 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=EWdZvmYUlJRDtZXnZwgVzGzkwZA5rT6A6qUCDD9CYVYGwYfeMPwY+fSTA6ZJVsyZ2uS4FeLWoaQRBeijlZTdGHuUVK7a5+vd+jqlziCfhxuRIHGU2dwDwggt4GtD79mXsg4bmbEmbf5YtAUSDkInTJVgO+0OFy1L4MvKQw31nOg= Received: by 10.11.118.75 with SMTP id q75mr99761cwc; Sun, 28 Nov 2004 17:02:42 -0800 (PST) Received: by 10.11.116.73 with HTTP; Sun, 28 Nov 2004 17:02:42 -0800 (PST) Message-ID: Date: Mon, 29 Nov 2004 12:02:42 +1100 From: Anish Babu Pillai To: Paul Kaletta In-Reply-To: <86is7qot95.fsf@ewido.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit References: <86is7qot95.fsf@ewido.net> cc: freebsd-mobile@freebsd.org Subject: Re: How do Dell-Notebooks work with FreeBSD (video/audio/wlan)? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Anish Babu Pillai List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Nov 2004 05:11:00 -0000 Hi Paul, I have an entry level Dell Inspiron 1150. One thing I can vouch for is reliability. These guys are good. As for LCD display quality, the specifications are a good indicator. Component quality is good - Dells are cheaper because of the company's inventory management and manufacturing process, not because of an compromise with quality. Entry level machines have sound cards onboard, and as such, the mic input is average/soundblaster compatible. High end models with TurtleBeach soundboards used to be around. I am not sure about Auxillary input sockets on notebooks. Perhaps the higher end models have them - you can make a free (depending on which country you're in) enquiry call to Dell and confirm. Many cheers and good luck. -- Anish Babu Pillai "...We are not human beings in an occassional spiritual experience....we are spiritual beings in the occassional human experience...." On Sun, 28 Nov 2004 17:03:50 +0100, Paul Kaletta wrote: > Hi, > > I think that I'll buy a Laptop soon. I haven't made up my mind yet, but > I think that I might buy a Dell, since they're so cheap and I haven't > heard many bad things. Those Notebooks come with Windows preinstalled, > but I'd like to run FreeBSD if it's possible. > > Has anyone any experience with them? > Is all of the build-in hardware supported? What about accelerated video? > > There is some choice about different displays, and some of them have > very very high resolutions like 1600x1200 on a 15"-screen. Is such a > display usable under X? > > And another very important question: > > I wanted to play around with audio-software, so how good is the build-in > audio-card? > > Especially I would like to know whether Dell-Notebooks have > an line-in, since I'm not certain from the descriptions on the web-site. > > Also: is the audio-output very noisy or can I use the line in for any > recordings? (I don't need very high quality, but I'd like to record > myself playing guitar and use that as background-music for > improvisations). > > If it's not feasible to use the build-in hardware, can I use external > audio-hardware with FreeBSD? Like pc-card or USB soundcards? > > I'm not entirely sure, but I think that the wlan hardware kinda works, > even if I have to use ndisulator, right? Is there any hope that I don't > have use it one day? > > Sorry that I asked so many questions in one mail, but they really only > concern Dell-Notebooks, so someone who has a recent model could probably > give me some hints. > > Thanks > > Paul > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > From owner-freebsd-mobile@FreeBSD.ORG Tue Nov 30 09:21:33 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D2B2B16A4CE for ; Tue, 30 Nov 2004 09:21:33 +0000 (GMT) Received: from totem.fix.no (totem.fix.no [80.91.36.20]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2E5BD43D5E for ; Tue, 30 Nov 2004 09:21:33 +0000 (GMT) (envelope-from espent@totem.fix.no) Received: from localhost (totem.fix.no [80.91.36.20]) by totem.fix.no (Postfix) with ESMTP id 440CD5F3825 for ; Tue, 30 Nov 2004 10:21:32 +0100 (CET) Received: from totem.fix.no ([80.91.36.20]) by localhost (totem.fix.no [80.91.36.20]) (amavisd-new, port 10024) with LMTP id 78888-02-8 for ; Tue, 30 Nov 2004 10:21:28 +0100 (CET) Received: by totem.fix.no (Postfix, from userid 1032) id DC3005F380D; Tue, 30 Nov 2004 10:21:28 +0100 (CET) Date: Tue, 30 Nov 2004 10:21:28 +0100 From: Espen Tagestad To: freebsd-mobile@freebsd.org Message-ID: <20041130092128.GA79054@totem.fix.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.6i Subject: ACPI differences 4.10 - 5.3, laptop problem X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 09:21:33 -0000 Hi, I have run FreeBSD 4 on my laptop for a couple of years know, and as ACPI was included in 4.9 (or was it 4.10) I was quite satisfied with the situation. Now, I've upgraded to 5.3 on ACPI is no longer working. With acpi enabled, the laptop starts but after 10-15 seconds it stops and won't respond to anything. Currently it runs without ACPI with the thermal coolers on full speed. It's irritating, and it'll probably eat up the batteries much faster than running with ACPI. * Is there any tunable options to get ACPI working? * What is the differences with ACPI on FreeBSD 4 vs 5? * Can I run FreeBSD 4-ACPI on FreeBSD 5? My laptop is a Acer Travelmate 630-series. dmesg out is as follows (with ACPI disabled): Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #1: Sun Nov 28 15:59:56 UTC 2004 root@:/usr/obj/usr/src/sys/LEFSE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1560.22-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff real memory = 535756800 (510 MB) avail memory = 518795264 (494 MB) npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pcib0: pcibus 0 on motherboard pir0: on motherboard pci0: on pcib0 agp0: mem 0xf0000000-0xf7ffffff at device 0.0 o n pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) pci0: at device 6.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 pci0: at device 8.0 (no driver attached) rl0: port 0x2000-0x20ff mem 0xe0002000-0xe00020ff ir q 11 at device 10.0 on pci0 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:00:e2:8d:6b:51 pci0: at device 11.0 (no driver attached) cbb0: at device 12.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ohci0: mem 0xe0003000-0xe0003fff irq 11 at device 15.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered atapci0: port 0x2480-0x248f,0x376,0x170-0x 177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: at device 17.0 (no driver attached) cbb1: at device 19.0 on pci0 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb2: at device 19.1 on pci0 cardbus2: on cbb2 pccard2: <16-bit PCCard bus> on cbb2 ohci1: mem 0xe0004000-0xe0004fff irq 11 at device 20.0 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered cpu0 on motherboard orm0: at iomem 0xdc000-0xdffff,0xd8000-0xdbfff on isa0 pmtimer0 on isa0 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources (port) unknown: can't assign resources (memory) unknown: can't assign resources (memory) fdc1: cannot allocate I/O port (6 ports) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (irq) unknown: can't assign resources (port) Timecounter "TSC" frequency 1560224664 Hz quality 800 Timecounters tick every 10.000 msec IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ad0: 28615MB [58140/16/63] at ata0-master UDMA33 acd0: DVDROM at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a wi0: at port 0x100-0x13f irq 10 function 0 co nfig 1 on pccard0 wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (6.16.1) wi0: Ethernet address: 00:02:2d:6e:72:fc wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps pccard2: (manufacturer=0xffff, product=0x0001) at function 0 pccard2: CIS info: O2Micro, SmartCardBus Reader, V1.0 Thanks for all advices! reagards, Espen Tagestad From owner-freebsd-mobile@FreeBSD.ORG Tue Nov 30 13:12:19 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1FBFA16A4CE for ; Tue, 30 Nov 2004 13:12:19 +0000 (GMT) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id C5FF443D46 for ; Tue, 30 Nov 2004 13:12:18 +0000 (GMT) (envelope-from anfont@gmail.com) Received: by wproxy.gmail.com with SMTP id 68so47037wri for ; Tue, 30 Nov 2004 05:12:15 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=KfDmDR9kaJ4QRjL6GmO8VEVOmWfVRNY54m0lUJzYi5kAnCnyVS780zy1JsMRgWDnlxNO5SYrkC0pe/nRXQEtHvkFeZm7qnB0Dzo573Ho18HXIujf2gsUkhcmZEfdoOdYSbcCOQz0bqzPx8svcYb9ZuyffdALyWNfCvx4GBmj1Kc= Received: by 10.54.26.8 with SMTP id 8mr50213wrz; Tue, 30 Nov 2004 05:12:15 -0800 (PST) Received: by 10.54.32.62 with HTTP; Tue, 30 Nov 2004 05:12:15 -0800 (PST) Message-ID: Date: Tue, 30 Nov 2004 14:12:15 +0100 From: Antoni Font To: freebsd-mobile@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: NEC laptop ok with 4.9 but not run with 5.2.1 X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Antoni Font List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 13:12:19 -0000 Hi list, I installed freebsd 4.9 on NEC versa M500 laptop without problems. Now I'm trying install freebsd 5.2.1 over the same computer but it not run. Before the start-up options (I tried all types of boot, default, with acpi......) and the cpu type and memory are detected, it remains eternally stopped at the line: pci_cfgintr: 0:2 INTA BIOS irq 10 I tried disabling sound card and other devices in the bios, but I have the same error. some suggestion? Thanks in advance for yor help From owner-freebsd-mobile@FreeBSD.ORG Tue Nov 30 17:05:54 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E73116A4CE for ; Tue, 30 Nov 2004 17:05:54 +0000 (GMT) Received: from harmony.village.org (rover.village.org [168.103.84.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6276743D48 for ; Tue, 30 Nov 2004 17:05:53 +0000 (GMT) (envelope-from imp@bsdimp.com) Received: from localhost (harmony.village.org [10.0.0.6]) by harmony.village.org (8.13.1/8.13.1) with ESMTP id iAUH4Dno052160; Tue, 30 Nov 2004 10:04:18 -0700 (MST) (envelope-from imp@bsdimp.com) Date: Tue, 30 Nov 2004 10:05:13 -0700 (MST) Message-Id: <20041130.100513.55300375.imp@bsdimp.com> To: rschi@rsmba.biz From: "M. Warner Losh" In-Reply-To: <41A4F2E1.4070801@rsmba.biz> References: <41A4F2E1.4070801@rsmba.biz> X-Mailer: Mew version 3.3 on Emacs 21.3 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: IRQ conflicts on RELEASE 5.2.1: Thinkpad 600x and PCM100 X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 17:05:54 -0000 In message: <41A4F2E1.4070801@rsmba.biz> Richard Schilling writes: : Can someone give me a clue on how to identify IRQ conflicts on 5.2.1? You don't have IRQ conflicts with pccard any more. Shared IRQs are now on by default for cbb. Warner From owner-freebsd-mobile@FreeBSD.ORG Tue Nov 30 20:15:23 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9EDD916A4CE for ; Tue, 30 Nov 2004 20:15:23 +0000 (GMT) Received: from mail2.speakeasy.net (mail2.speakeasy.net [216.254.0.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5611243D48 for ; Tue, 30 Nov 2004 20:15:23 +0000 (GMT) (envelope-from jhb@FreeBSD.org) Received: (qmail 4077 invoked from network); 30 Nov 2004 20:15:22 -0000 Received: from dsl027-160-063.atl1.dsl.speakeasy.net (HELO server.baldwin.cx) ([216.27.160.63]) (envelope-sender ) encrypted SMTP for ; 30 Nov 2004 20:10:59 -0000 Received: from qa4379.itdev.weather.com (gw1.twc.weather.com [216.133.140.1]) (authenticated bits=0) by server.baldwin.cx (8.12.11/8.12.11) with ESMTP id iAUKAW0B089425; Tue, 30 Nov 2004 15:10:54 -0500 (EST) (envelope-from jhb@FreeBSD.org) From: John Baldwin To: freebsd-mobile@FreeBSD.org Date: Tue, 30 Nov 2004 14:07:17 -0500 User-Agent: KMail/1.6.2 References: <20041130092128.GA79054@totem.fix.no> In-Reply-To: <20041130092128.GA79054@totem.fix.no> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200411301407.17081.jhb@FreeBSD.org> X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on server.baldwin.cx cc: Espen Tagestad Subject: Re: ACPI differences 4.10 - 5.3, laptop problem X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 Nov 2004 20:15:23 -0000 On Tuesday 30 November 2004 04:21 am, Espen Tagestad wrote: > Hi, > > I have run FreeBSD 4 on my laptop for a couple of years know, and as > ACPI was included in 4.9 (or was it 4.10) I was quite satisfied with the > situation. Now, I've upgraded to 5.3 on ACPI is no longer working. With > acpi enabled, the laptop starts but after 10-15 seconds it stops and > won't respond to anything. Currently it runs without ACPI with the > thermal coolers on full speed. It's irritating, and it'll probably eat > up the batteries much faster than running with ACPI. Just a note: ACPI in 4.x is mostly a joke (I know, I did the backport). All it really does is make sure the power button works as well as the timer and maybe simple CPU throttling. The thermal stuff might work (fan control, etc.) but it's not guaranteed. ACPI in 5.x is much more mature though it seems to have a problem on your particular machine. Can you boot a 5.x kernel with ACPI enabled over a serial console to capture the dmesg to a log and e-mail it back? -- John Baldwin <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org From owner-freebsd-mobile@FreeBSD.ORG Wed Dec 1 04:38:00 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C240216A4D5; Wed, 1 Dec 2004 04:38:00 +0000 (GMT) Received: from mail.apdip.net (zeus.apdip.net [202.187.94.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id C191B43D5E; Wed, 1 Dec 2004 04:37:59 +0000 (GMT) (envelope-from khairil@apdip.net) Received: from 192.168.0.28 (unknown [202.187.94.4]) by mail.apdip.net (Postfix) with ESMTP id 7155B2A4077; Wed, 1 Dec 2004 12:38:59 +0800 (MYT) From: Khairil Yusof To: freebsd-mobile@freebsd.org Content-Type: text/plain Organization: UNDP-APDIP International Open Source Network Date: Wed, 01 Dec 2004 12:36:52 +0800 Message-Id: <1101875812.708.7.camel@wolverine> Mime-Version: 1.0 X-Mailer: Evolution 2.0.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit cc: Ian Dowse Subject: USB ehci resume problems fixed in 5-stable X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 04:38:00 -0000 Just to let others know that Ian Dowse has just MFC'ed latest USB updates from current to the stable branch. Amongst the fixes is resume/suspend for USB devices (ehci) which was not working. I can confirm on my thinkpad x40 that my USB thumbdrive, dvd drive and mouse are all working properly after an S3 suspend. FreeBSD 5-stable mobile support is impressive! From owner-freebsd-mobile@FreeBSD.ORG Wed Dec 1 07:21:53 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1642B16A4CE; Wed, 1 Dec 2004 07:21:53 +0000 (GMT) Received: from outbox.allstream.net (outbox.allstream.net [207.245.244.41]) by mx1.FreeBSD.org (Postfix) with ESMTP id 83C8743D39; Wed, 1 Dec 2004 07:21:52 +0000 (GMT) (envelope-from epilogue@allstream.net) Received: from localhost (mon-pq63-053.dial.allstream.net [216.123.137.181]) by outbox.allstream.net (Allstream MTA) with SMTP id E72CAEB4E4; Wed, 1 Dec 2004 02:21:28 -0500 (EST) Date: Wed, 1 Dec 2004 02:21:35 -0500 From: epilogue To: freebsd-questions@freebsd.org, freebsd-mobile@freebsd.org Message-ID: <20041201022135.7419cbea@localhost> X-Mailer: Sylpheed-Claws 0.9.12b (GTK+ 1.2.10; i386-portbld-freebsd5.3) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: acpi laptop fan control X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 07:21:53 -0000 hello all, i'm hoping that someone here might have a suggestion for a longstanding and nagging little problem - my laptop fan /never/ shuts off. the machine is a Compal N30W, which is the OEM version of the Dell Inspiron 5000. i'm running 5.3 and have the latest BIOS. from what i've read, it is supposed to be a green fan, which means that it should adapt to the temperature of the machine. off when not needed and up through various speeds when required. i've noted at least two settings: 1. low, the constant (and irritating) whir and 2. high, when the temperature jumps during heavy use. i tried force a state change with sysctl, but as you can see, the change is denied: # sysctl hw.acpi.thermal.tz0.active=0 hw.acpi.thermal.tz0.active: -1 -> -1 # sysctl hw.acpi.thermal.tz0.active=1 hw.acpi.thermal.tz0.active: -1 -> -1 have also tried forcing a change through sysctl.conf (and loader.conf) then a reboot, but neither manages to change the state from -1. these are new features and the man pages only have so much to offer. hopefully, someone will have a suggestion. thanks for your time. cheers, epi ---------------------------------- > sysctl -a | grep -i acpi ---------------------------------- acpibatt 2 1K 1K 2 16 acpidev 59 2K 2K 59 32 acpisem 18 2K 2K 18 64 acpitask 0 0K 1K 64938 16,32 acpica 1635 87K 91K 904153 16,32,64,128,256,512,1024,2048 kern.timecounter.hardware: ACPI-safe kern.timecounter.choice: TSC(800) ACPI-safe(1000) i8254(0) dummy(-1000000) debug.acpi.acpi_ca_version: 0x20040527 debug.acpi.semaphore_debug: 0 hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.reset_video: 1 hw.acpi.cpu.throttle_max: 8 hw.acpi.cpu.throttle_state: 8 hw.acpi.cpu.cx_supported: C1/0 C2/10 hw.acpi.cpu.cx_lowest: C2 hw.acpi.cpu.cx_usage: 0.22% 99.77% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 3330 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 3590 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3880 hw.acpi.thermal.tz0._ACx: 3530 3470 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 machdep.acpi_timer_freq: 3579545 machdep.acpi_root: 1012160 dev.acpi.0.%desc: COMPAL N30W dev.acpi.0.%driver: acpi dev.acpi_sysresource.0.%desc: System Resource dev.acpi_sysresource.0.%driver: acpi_sysresource dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_ dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0 dev.acpi_sysresource.0.%parent: acpi0 dev.acpi_sysresource.1.%desc: System Resource dev.acpi_sysresource.1.%driver: acpi_sysresource dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.PX40.MOTH dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0 dev.acpi_sysresource.1.%parent: acpi0 dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x9 dev.acpi_ec.0.%driver: acpi_ec dev.acpi_ec.0.%location: handle=\_SB_.PCI0.PX40.EC0_ dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0 dev.acpi_ec.0.%parent: acpi0 dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz dev.acpi_timer.0.%driver: acpi_timer dev.acpi_timer.0.%location: unknown dev.acpi_timer.0.%pnpinfo: unknown dev.acpi_timer.0.%parent: acpi0 dev.cpu.0.%desc: ACPI CPU (3 Cx states) dev.cpu.0.%parent: acpi0 dev.acpi_tz.0.%desc: Thermal Zone dev.acpi_tz.0.%driver: acpi_tz dev.acpi_tz.0.%location: handle=\_TZ_.THRM dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0 dev.acpi_tz.0.%parent: acpi0 dev.acpi_lid.0.%desc: Control Method Lid Switch dev.acpi_lid.0.%driver: acpi_lid dev.acpi_lid.0.%location: handle=\_SB_.LID_ dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0 dev.acpi_lid.0.%parent: acpi0 dev.acpi_lid.0.wake: 1 dev.acpi_cmbat.0.%desc: Control Method Battery dev.acpi_cmbat.0.%driver: acpi_cmbat dev.acpi_cmbat.0.%location: handle=\_SB_.BAT0 dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=1 dev.acpi_cmbat.0.%parent: acpi0 dev.acpi_cmbat.1.%desc: Control Method Battery dev.acpi_cmbat.1.%driver: acpi_cmbat dev.acpi_cmbat.1.%location: handle=\_SB_.BAT1 dev.acpi_cmbat.1.%pnpinfo: _HID=PNP0C0A _UID=2 dev.acpi_cmbat.1.%parent: acpi0 dev.acpi_acad.0.%desc: AC Adapter dev.acpi_acad.0.%driver: acpi_acad dev.acpi_acad.0.%location: handle=\_SB_.AC__ dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0 dev.acpi_acad.0.%parent: acpi0 dev.pcib.0.%desc: ACPI Host-PCI bridge dev.pcib.0.%parent: acpi0 dev.pcib.1.%desc: ACPI PCI-PCI bridge dev.pci.0.%desc: ACPI PCI bus dev.pci.1.%desc: ACPI PCI bus dev.acpi_button.0.%desc: Power Button dev.acpi_button.0.%driver: acpi_button dev.acpi_button.0.%location: handle=\_SB_.PWRB dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0 dev.acpi_button.0.%parent: acpi0 dev.acpi_button.0.wake: 1 dev.acpi_button.1.%desc: Sleep Button dev.acpi_button.1.%driver: acpi_button dev.acpi_button.1.%location: handle=\_SB_.SBTN dev.acpi_button.1.%pnpinfo: _HID=PNP0C0E _UID=0 dev.acpi_button.1.%parent: acpi0 dev.atdma.0.%parent: acpi0 dev.attimer.0.%parent: acpi0 dev.attimer.1.%parent: acpi0 dev.atpic.0.%parent: acpi0 dev.npxisa.0.%parent: acpi0 dev.atkbdc.0.%parent: acpi0 dev.psmcpnp.0.%parent: acpi0 dev.fdc.0.%parent: acpi0 dev.ppc.0.%parent: acpi0 dev.sio.0.%parent: acpi0 dev.sio.1.%parent: acpi0 From owner-freebsd-mobile@FreeBSD.ORG Wed Dec 1 08:04:08 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1620E16A4CE for ; Wed, 1 Dec 2004 08:04:08 +0000 (GMT) Received: from antivirus.uni-rostock.de (antivirus.uni-rostock.de [139.30.8.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id F113243D2F for ; Wed, 1 Dec 2004 08:04:06 +0000 (GMT) (envelope-from karsten.rothemund@uni-rostock.de) Received: from antivirus.exch.rz.uni-rostock.de ([127.0.0.1]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Wed, 1 Dec 2004 09:04:05 +0100 Received: from antivirus.uni-rostock.de (unverified) by antivirus.exch.rz.uni-rostock.de for ; Wed, 1 Dec 2004 09:04:00 +0100 Received: from mail.uni-rostock.de ([139.30.8.11]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Wed, 1 Dec 2004 09:04:00 +0100 Received: from conversion-daemon.mail2.uni-rostock.de by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) id <0I8100E019SKWU@mail.uni-rostock.de> (original mail from karsten.rothemund@uni-rostock.de) for freebsd-mobile@FreeBSD.org; Wed, 01 Dec 2004 09:03:58 +0100 (MET) Received: from [139.30.91.160] (pfau.e-technik1.uni-rostock.de [139.30.91.160]) by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I810096BAEHSX@mail.uni-rostock.de> for freebsd-mobile@FreeBSD.org; Wed, 01 Dec 2004 09:03:53 +0100 (MET) Date: Wed, 01 Dec 2004 09:03:35 +0100 From: Karsten Rothemund In-reply-to: <200411301407.17081.jhb@FreeBSD.org> To: freebsd-mobile@FreeBSD.org Message-id: <41AD7AD7.1070304@uni-rostock.de> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary=------------enig5779FC94B08B9468207FB8FA X-Accept-Language: en-us, en User-Agent: Mozilla Thunderbird 0.8 (X11/20040918) X-Enigmail-Version: 0.86.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime References: <20041130092128.GA79054@totem.fix.no> <200411301407.17081.jhb@FreeBSD.org> X-OriginalArrivalTime: 01 Dec 2004 08:04:00.0082 (UTC) FILETIME=[50911B20:01C4D77C] Subject: Re: ACPI differences 4.10 - 5.3, laptop problem X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 08:04:08 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig5779FC94B08B9468207FB8FA Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit John Baldwin wrote: > On Tuesday 30 November 2004 04:21 am, Espen Tagestad wrote: > >>Hi, >> >>I have run FreeBSD 4 on my laptop for a couple of years know, and as >>ACPI was included in 4.9 (or was it 4.10) I was quite satisfied with the >>situation. Now, I've upgraded to 5.3 on ACPI is no longer working. With >>acpi enabled, the laptop starts but after 10-15 seconds it stops and >>won't respond to anything. Currently it runs without ACPI with the >>thermal coolers on full speed. It's irritating, and it'll probably eat >>up the batteries much faster than running with ACPI. I think, I observed a change in the ACPI behaviour, too: on my laptop a FreeBSD 5-CURRENT was installed for testing. Now, after 5 is stable, I want to change fully to FreeBSD. But after updating to 5-STABLE, I observe the fans continously running (but not at full speed) though air is cold, and the laptop does not switch the power off anymore, when I do a "shutdown -p now". Both worked under CURRENT. > > > Just a note: ACPI in 4.x is mostly a joke (I know, I did the backport). All I never tried FBSD 4 on this laptop ... > it really does is make sure the power button works as well as the timer and > maybe simple CPU throttling. The thermal stuff might work (fan control, > etc.) but it's not guaranteed. ACPI in 5.x is much more mature though it > seems to have a problem on your particular machine. Can you boot a 5.x > kernel with ACPI enabled over a serial console to capture the dmesg to a log > and e-mail it back? > If you want, I can support you with additional information too. It's a DELL Inspiron 8100 (I think DELL is special ;-) Greetings from the Baltic Sea, -- Karsten Rothemund, Institut f. Allgemeine Elektrotechnik, Universitaet Rostock Tel.: +49 (0)381 498 3649 E-Mail: karsten.rothemund@etechnik.uni-rostock.de (PGP- and GnuPG-Key available on my HomePage: http://www-ae.e-technik.uni-rostock.de/home/karo/) --------------enig5779FC94B08B9468207FB8FA Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBrXrk41121otnQEwRAs9HAJ0WfiCurZE7Ia0UtkxRw8S+WvQIfgCgney6 LXnnMpGSntcrrAOi80UGtsU= =w2Uw -----END PGP SIGNATURE----- --------------enig5779FC94B08B9468207FB8FA-- From owner-freebsd-mobile@FreeBSD.ORG Wed Dec 1 10:12:18 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1603616A4CE; Wed, 1 Dec 2004 10:12:18 +0000 (GMT) Received: from totem.fix.no (totem.fix.no [80.91.36.20]) by mx1.FreeBSD.org (Postfix) with ESMTP id C8F1343D6B; Wed, 1 Dec 2004 10:12:17 +0000 (GMT) (envelope-from espent@totem.fix.no) Received: from localhost (totem.fix.no [80.91.36.20]) by totem.fix.no (Postfix) with ESMTP id EA9C85F3825; Wed, 1 Dec 2004 11:12:16 +0100 (CET) Received: from totem.fix.no ([80.91.36.20]) by localhost (totem.fix.no [80.91.36.20]) (amavisd-new, port 10024) with LMTP id 26129-01-9; Wed, 1 Dec 2004 11:12:13 +0100 (CET) Received: by totem.fix.no (Postfix, from userid 1032) id CA1495F380D; Wed, 1 Dec 2004 11:12:13 +0100 (CET) Date: Wed, 1 Dec 2004 11:12:13 +0100 From: Espen Tagestad To: John Baldwin Message-ID: <20041201101213.GB26164@totem.fix.no> References: <20041130092128.GA79054@totem.fix.no> <200411301407.17081.jhb@FreeBSD.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200411301407.17081.jhb@FreeBSD.org> User-Agent: Mutt/1.5.6i cc: freebsd-mobile@FreeBSD.org Subject: Re: ACPI differences 4.10 - 5.3, laptop problem X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 10:12:18 -0000 On Tue, Nov 30, 2004 at 02:07:17PM -0500, John Baldwin wrote: > Just a note: ACPI in 4.x is mostly a joke (I know, I did the backport). All > it really does is make sure the power button works as well as the timer and > maybe simple CPU throttling. The thermal stuff might work (fan control, > etc.) but it's not guaranteed. ACPI in 5.x is much more mature though it > seems to have a problem on your particular machine. Can you boot a 5.x > kernel with ACPI enabled over a serial console to capture the dmesg to a log > and e-mail it back? Maybe it's just a joke, but it worked perfectly for me. It slowed down the coolers (nearly stopped) when the laptop was doing lightweight stuff, and started them up for full when doing harder work. Allthough, suspend, resume and power off that didn't work at all, but that was good enough for me. I just had to press the power down button for 4 seconds to shut it down. I don't have any serial cable where I'm sitting right now, but hopefully I can arrange a screen capture from the boot with acpi enabled at the end of this week. I also have to mention that I upgraded the bios yesterday, but that didn't do any good either. mvh. Espen From owner-freebsd-mobile@FreeBSD.ORG Wed Dec 1 23:18:00 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9CCA716A4CE for ; Wed, 1 Dec 2004 23:18:00 +0000 (GMT) Received: from a.mx.aegisnet.de (a.mx.aegisnet.de [213.238.36.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id BBA8243D46 for ; Wed, 1 Dec 2004 23:17:59 +0000 (GMT) (envelope-from carp@hacksocke.de) Received: (qmail 996 invoked from network); 1 Dec 2004 23:18:19 -0000 Received: from unknown (HELO galadriel.bbk.hh.aegisnet.de) ([213.39.152.76]) (envelope-sender )encrypted SMTP for ; 1 Dec 2004 23:18:19 -0000 Received: from galadriel.bbk.hh.aegisnet.de (localhost [127.0.0.1]) iB1NI1hn000837 for ; Thu, 2 Dec 2004 00:18:01 +0100 (CET) (envelope-from carp@hacksocke.de) Received: (from czimmer@localhost)iB1NHsUj000835 for freebsd-mobile@freebsd.org; Thu, 2 Dec 2004 00:17:54 +0100 (CET) (envelope-from carp@hacksocke.de) Resent-Message-Id: <200412012317.iB1NHsUj000835@galadriel.bbk.hh.aegisnet.de> X-Authentication-Warning: galadriel.bbk.hh.aegisnet.de: czimmer set sender to carp@hacksocke.de using -f Delivered-To: carp@hacksocke.de Received: (qmail 83936 invoked from network); 1 Dec 2004 10:30:03 -0000 Received: from unknown (HELO auenland.hoffmannconsulting.de) ([212.202.153.78]) (envelope-sender ) by a.mx.aegisnet.de (qmail-ldap-1.03) with SMTP for ; 1 Dec 2004 10:30:03 -0000 Received: by auenland.hoffmannconsulting.de (Postfix, from userid 65534) id C5E893E0070; Wed, 1 Dec 2004 11:29:39 +0100 (CET) Received: from [192.168.0.222] (dhcp-222.intra.hoffmannconsulting.de [192.168.0.222]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (Client did not present a certificate) by auenland.hoffmannconsulting.de (Postfix) with ESMTP id A99813E006E; Wed, 1 Dec 2004 11:29:37 +0100 (CET) Message-ID: <41AD9D12.2020506@hacksocke.de> Date: Wed, 01 Dec 2004 11:29:38 +0100 From: Carsten Zimmermann User-Agent: Mozilla Thunderbird 0.8 (X11/20040913) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org X-Enigmail-Version: 0.86.1.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on auenland.hoffmannconsulting.de X-Spam-Level: X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.64 Resent-From: carp@hacksocke.de Resent-Date: Thu, 2 Dec 2004 00:17:54 +0100 Resent-To: freebsd-mobile@freebsd.org Subject: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Dec 2004 23:18:00 -0000 Hello folks. I am not quite sure if I should address you, but since the following problem only occurs on my FreeBSD laptop, I'll do. :) I upgraded lately to a clean iso installed 5.3-R. From then, my laptop always gives an eeky "beeeeeeep" when the boot loader prompts. It was all silent with 5.2.1 and I'd like it to be that way again ;) Is this a known issue? Can s.o. give me hint (some PLEASE_DO_NOT_MAKE_NOISE_DURING_BOOT=yo in /boot/loader.conf) Thanks! Carsten -- Carsten Zimmermann // GERMANY // PGP: http://hacksocke.de/public_key.asc From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 00:09:47 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6603116A4CE for ; Thu, 2 Dec 2004 00:09:47 +0000 (GMT) Received: from kermodei.com (kermodei.com [216.103.110.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2618543D53 for ; Thu, 2 Dec 2004 00:09:47 +0000 (GMT) (envelope-from markd@kermodei.com) Received: from localhost (localhost [127.0.0.1]) by kermodei.com (Postfix) with ESMTP id 0A8915C71; Wed, 1 Dec 2004 16:08:29 -0800 (PST) Received: from kermodei.com ([127.0.0.1]) by localhost (osprey.kermodei.com [127.0.0.1]) (amavisd-new, port 10025) with ESMTP id 77730-09; Wed, 1 Dec 2004 16:08:23 -0800 (PST) Received: by kermodei.com (Postfix, from userid 1000) id AA0735C6A; Wed, 1 Dec 2004 16:08:23 -0800 (PST) From: Mark Diekhans MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="Y8u6t3iB8f" Content-Transfer-Encoding: 7bit Message-ID: <16814.23799.439022.760893@osprey.kermodei.com> Date: Wed, 1 Dec 2004 16:08:23 -0800 To: Carsten Zimmermann In-Reply-To: <41AD9D12.2020506@hacksocke.de> References: <41AD9D12.2020506@hacksocke.de> X-Mailer: VM 7.18 under Emacs 21.3.1 cc: freebsd-mobile@freebsd.org Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 00:09:47 -0000 --Y8u6t3iB8f Content-Type: text/plain; charset=us-ascii Content-Description: message body text Content-Transfer-Encoding: 7bit Carsten Zimmermann writes: > I upgraded lately to a clean iso installed 5.3-R. From then, my laptop > always gives an eeky "beeeeeeep" when the boot loader prompts. It was > all silent with 5.2.1 and I'd like it to be that way again ;) I found this really annoying and dug into the code and patch it on my system. The enclose patch gets rid of this. To install it, I used the following commands: cd /usr/src patch Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E365016A4CE for ; Thu, 2 Dec 2004 01:05:43 +0000 (GMT) Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6A26743D54 for ; Thu, 2 Dec 2004 01:05:43 +0000 (GMT) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (localhost [127.0.0.1]) by bunrab.catwhisker.org (8.13.1/8.13.1) with ESMTP id iB215hVo004503 for ; Wed, 1 Dec 2004 17:05:43 -0800 (PST) (envelope-from david@bunrab.catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.13.1/8.13.1/Submit) id iB215hia004502 for mobile@freebsd.org; Wed, 1 Dec 2004 17:05:43 -0800 (PST) (envelope-from david) Date: Wed, 1 Dec 2004 17:05:43 -0800 (PST) From: David Wolfskill Message-Id: <200412020105.iB215hia004502@bunrab.catwhisker.org> To: mobile@freebsd.org Subject: Susceptibility of Dell 8200 to thermal stress/fatigue? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 01:05:44 -0000 My first laptop was a Compal N38W2 -- sold by various vendors under different model names, but was very similar to the Inspiron 5000e. After about 18 months of use, I found that it was suffering from thermal stress, in part because there were springs (to force contact between the CPU and the heat sink) on only 3 of the 4 screws. I bandaged things together as best I could, and kept it going for another 6 months, at which point it would not remain powered on for very long at all. I replaced it with a (used, but still under warranty) Dell i5000e -- in large part because I could (and did) make use of the same batteries and peripherals. (Except for the AC adapter. Dell uses a grounded plug for the AC side, and a 3-pin connector on the DC side, while the N38W2 uses only 2 connectors for each.) That machine served for about 2 years, and now it, too, is showing symptoms of thermal stress (or a crack in the system board) -- it generally won't even light up the LCD display during the power-on sequence before it shuts itself off, only to try again.... :-( Some (sysadmin) colleagues have loaned me an underutilized laptop of theirs, which I appreciate immensely. However, I'm finding that certain of my approaches to doing things tended to take advantage of the "screen real estate" I had available on the previous two machines (SXGA+ -- 1400x1050 in each case). And I find that I'm far more accustomed to using a touchpad than a trackpoint. :-{ Indeed, these are sufficient that despite our financial condition (I live in the SF Bay area, which has been hit pretty hard by the changes in the economy for the last couple of years), I'm looking to get a replacement laptop that will enhance my productivity. >From ads on craigslist and eBay, it looks to me as if a Dell 8200 with a UXGA (1600x1200) screen ought to work out reasonably well -- better than the laptops in Dell's current catalogue, in that of the latter, only one has an integrated "standard" (for PCs) serial port. (As a sysadmin, I sometimes need to connect to random devices that only talk serial.) [Yes, I could get a USB<->DB9 dongle; that's one more thing to lose or break, as well as pay for.] I don't really care about a disk drive, as my old disk drive still works (I'm using it in the loaner laptop as I type). Now, it looks as if the Dell Latitude C840 is fairly similar to the Inspiron 8200. As far as running FreEBSD on the machine, are there any salient differences? And does anyone have any ideas as to how susceptible either is to thermal stress? This comes into play because I keep a local copy of the FreeBSD CVS repository on my laptop, updated daily, and have been tracking RELENG_4 as often as the corresponding working directory changed (usually, daily). I had been tracking HEAD (on another slice) until RELENG_5 was branched, and I then tracked RELENG_5. (I do have a slice for HEAD, but 2 buildworlds in a day was eating into my time a bit much; 3 just wouldn't be feasible. I'll probably resume tracking HEAD once I migrate my production machines at home to 5.x.) (Yes, I am aware that some folks have encountered some challenges with suspend/resume and with making the lid switch behave "properly." And that I will probably be making the acquaintance of the NVidia driver in ports.) That last reminds me of another bit of workload for the machine -- a daily "portupgrade -a". Comments? Thanks! Peace, david --Peace, david -- David H. Wolfskill david@catwhisker.org I resent spammers because spam is a DoS attack on my time. See http://www.catwhisker.org/~david/publickey.gpg for public key. From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 01:15:41 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8DF3516A4CE for ; Thu, 2 Dec 2004 01:15:41 +0000 (GMT) Received: from mh2.centtech.com (moat3.centtech.com [207.200.51.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id D929743D45 for ; Thu, 2 Dec 2004 01:15:40 +0000 (GMT) (envelope-from anderson@centtech.com) Received: from centtech.com ([192.168.42.25]) by mh2.centtech.com (8.13.1/8.13.1) with ESMTP id iB21FGXe057726; Wed, 1 Dec 2004 19:15:16 -0600 (CST) (envelope-from anderson@centtech.com) Message-ID: <41AE6C31.7000107@centtech.com> Date: Wed, 01 Dec 2004 19:13:21 -0600 From: Eric Anderson User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7b) Gecko/20040316 X-Accept-Language: en-us, en MIME-Version: 1.0 To: David Wolfskill References: <200412020105.iB215hia004502@bunrab.catwhisker.org> In-Reply-To: <200412020105.iB215hia004502@bunrab.catwhisker.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV 0.80/585/Thu Nov 11 06:22:42 2004 clamav-milter version 0.80j on mh2.centtech.com X-Virus-Status: Clean cc: mobile@freebsd.org Subject: Re: Susceptibility of Dell 8200 to thermal stress/fatigue? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 01:15:41 -0000 David Wolfskill wrote: [..snip..] >>From ads on craigslist and eBay, it looks to me as if a Dell 8200 with a >UXGA (1600x1200) screen ought to work out reasonably well -- better than >the laptops in Dell's current catalogue, in that of the latter, only one >has an integrated "standard" (for PCs) serial port. (As a sysadmin, I >sometimes need to connect to random devices that only talk serial.) >[Yes, I could get a USB<->DB9 dongle; that's one more thing to lose or >break, as well as pay for.] I don't really care about a disk drive, as >my old disk drive still works (I'm using it in the loaner laptop as I >type). > >Now, it looks as if the Dell Latitude C840 is fairly similar to the >Inspiron 8200. As far as running FreEBSD on the machine, are there any >salient differences? > >And does anyone have any ideas as to how susceptible either is to >thermal stress? > >This comes into play because I keep a local copy of the FreeBSD CVS >repository on my laptop, updated daily, and have been tracking RELENG_4 >as often as the corresponding working directory changed (usually, >daily). I had been tracking HEAD (on another slice) until RELENG_5 was >branched, and I then tracked RELENG_5. (I do have a slice for HEAD, but >2 buildworlds in a day was eating into my time a bit much; 3 just >wouldn't be feasible. I'll probably resume tracking HEAD once I migrate >my production machines at home to 5.x.) > For what it's worth, I have a Dell D600, and I do much of the same that you do on your laptop on mine - I've been using it hard for a year, with no ill effects.. Eric From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 12:08:05 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7CECF16A4D4 for ; Thu, 2 Dec 2004 12:08:05 +0000 (GMT) Received: from fiinbeck.math.ntnu.no (fiinbeck.math.ntnu.no [129.241.15.140]) by mx1.FreeBSD.org (Postfix) with SMTP id F107E43D54 for ; Thu, 2 Dec 2004 12:08:03 +0000 (GMT) (envelope-from hanche+bounces@math.ntnu.no) Received: (qmail 85145 invoked from network); 2 Dec 2004 12:08:02 -0000 Received: from localhost (127.0.0.1) by localhost with SMTP; 2 Dec 2004 12:08:02 -0000 Date: Thu, 02 Dec 2004 13:08:02 +0100 (CET) Message-Id: <20041202.130802.40349122.hanche@math.ntnu.no> To: freebsd-mobile@freebsd.org From: Harald Hanche-Olsen In-Reply-To: <16814.23799.439022.760893@osprey.kermodei.com> References: <41AD9D12.2020506@hacksocke.de> <16814.23799.439022.760893@osprey.kermodei.com> X-URL: http://www.math.ntnu.no/~hanche/ X-Mailer: Mew version 3.3 on Emacs 21.3 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 12:08:05 -0000 + Mark Diekhans : | Carsten Zimmermann writes: | > I upgraded lately to a clean iso installed 5.3-R. From then, my laptop | > always gives an eeky "beeeeeeep" when the boot loader prompts. It was | > all silent with 5.2.1 and I'd like it to be that way again ;) | | I found this really annoying and dug into the code and patch it | on my system. The enclose patch gets rid of this. [...] | If you can file a pr on this it would be great.. While I agree that the beep is annoying, and will probably employ your patch on my laptop (thanks!), I might mention that the beep is probably there for a good reason: As an aid to booting machines with just a serial console attached. See "Tips for Serial Console Users" in INSTALL.TXT. An easy option to installing a beepless boot loader might be welcome, but making the default silent is probably not a good idea. - Harald From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 12:52:12 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 76A8F16A4CE for ; Thu, 2 Dec 2004 12:52:12 +0000 (GMT) Received: from hermes.mail.nl.demon.net (hermes.mail.nl.demon.net [194.159.72.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id E55BF43D53 for ; Thu, 2 Dec 2004 12:52:11 +0000 (GMT) (envelope-from jes@nl.demon.net) Received: from jes.noc.nl.demon.net ([194.159.72.196]:4649) by hermes.mail.nl.demon.net with esmtp (Exim 4.24) id 1CZqRP-0007ky-5w; Thu, 02 Dec 2004 12:52:11 +0000 Received: from jes by jes.noc.nl.demon.net with local (Exim 3.36 #1) id 1CZqRP-0002Ab-00; Thu, 02 Dec 2004 12:52:11 +0000 Date: Thu, 2 Dec 2004 13:52:11 +0100 From: Jim Segrave To: Harald Hanche-Olsen Message-ID: <20041202125211.GA5766@nl.demon.net> References: <41AD9D12.2020506@hacksocke.de> <16814.23799.439022.760893@osprey.kermodei.com> <20041202.130802.40349122.hanche@math.ntnu.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20041202.130802.40349122.hanche@math.ntnu.no> User-Agent: Mutt/1.4i Organisation: Demon Internet Netherlands cc: freebsd-mobile@freebsd.org Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: jes@nl.demon.net List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 12:52:12 -0000 On Thu 02 Dec 2004 (13:08 +0100), Harald Hanche-Olsen wrote: > + Mark Diekhans : > > | Carsten Zimmermann writes: > | > I upgraded lately to a clean iso installed 5.3-R. From then, my laptop > | > always gives an eeky "beeeeeeep" when the boot loader prompts. It was > | > all silent with 5.2.1 and I'd like it to be that way again ;) > | > | I found this really annoying and dug into the code and patch it > | on my system. The enclose patch gets rid of this. [...] > | If you can file a pr on this it would be great.. > > While I agree that the beep is annoying, and will probably employ your > patch on my laptop (thanks!), I might mention that the beep is > probably there for a good reason: As an aid to booting machines with > just a serial console attached. See "Tips for Serial Console Users" > in INSTALL.TXT. An easy option to installing a beepless boot loader > might be welcome, but making the default silent is probably not a good > idea. I think making the beep optional, default = off is a much better idea. If you're going to build a server with only serial console support, you need to know what you're doing anyway. -- Jim Segrave jes@nl.demon.net From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 16:47:15 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 08E4016A4CE for ; Thu, 2 Dec 2004 16:47:15 +0000 (GMT) Received: from ultra5.eskimo.com (ultra5.eskimo.com [204.122.16.68]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8159B43D5C for ; Thu, 2 Dec 2004 16:47:14 +0000 (GMT) (envelope-from joji@eskimo.com) Received: from eskimo.com (joji@eskimo.com [204.122.16.13]) by ultra5.eskimo.com (8.12.10/8.12.10) with ESMTP id iB2GkeBZ018427; Thu, 2 Dec 2004 08:46:41 -0800 Received: (from joji@localhost) by eskimo.com (8.9.1a/8.9.1) id IAA25434; Thu, 2 Dec 2004 08:46:40 -0800 (PST) Date: Thu, 2 Dec 2004 08:46:40 -0800 From: Joseph Olatt To: David Wolfskill Message-ID: <20041202084640.A24351@eskimo.com> References: <200412020105.iB215hia004502@bunrab.catwhisker.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <200412020105.iB215hia004502@bunrab.catwhisker.org>; from david@catwhisker.org on Wed, Dec 01, 2004 at 05:05:43PM -0800 cc: mobile@freebsd.org Subject: Re: Susceptibility of Dell 8200 to thermal stress/fatigue? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 16:47:15 -0000 On Wed, Dec 01, 2004 at 05:05:43PM -0800, David Wolfskill wrote: > > Now, it looks as if the Dell Latitude C840 is fairly similar to the > Inspiron 8200. As far as running FreEBSD on the machine, are there any > salient differences? > > And does anyone have any ideas as to how susceptible either is to > thermal stress? > I've been running FreeBSD (exclusively) on a Dell Inspiron 8200 for about 1 1/2 years now. My usage is not as heavy as yours, though. Currently I'm running 5.3-STABLE and some of the issues that I have are: 1. Interrupt storm on PCI bus and irq11 - I'm yet to figure out how to resolve this one. 2. If you are using the parallel port, you need to put the lpt0 in polled mode as opposed to using an IRQ (again, because of interrupt storms). Overall, it runs FreeBSD quite well. I suspect the Latitudes, geared for the corporate user, are probably more robust with proven components. regards, --joseph > This comes into play because I keep a local copy of the FreeBSD CVS > repository on my laptop, updated daily, and have been tracking RELENG_4 > as often as the corresponding working directory changed (usually, > daily). I had been tracking HEAD (on another slice) until RELENG_5 was > branched, and I then tracked RELENG_5. (I do have a slice for HEAD, but > 2 buildworlds in a day was eating into my time a bit much; 3 just > wouldn't be feasible. I'll probably resume tracking HEAD once I migrate > my production machines at home to 5.x.) > > (Yes, I am aware that some folks have encountered some challenges with > suspend/resume and with making the lid switch behave "properly." And > that I will probably be making the acquaintance of the NVidia driver in > ports.) > > That last reminds me of another bit of workload for the machine -- a > daily "portupgrade -a". > > Comments? > > Thanks! > > Peace, > david > --Peace, > david > -- > David H. Wolfskill david@catwhisker.org > I resent spammers because spam is a DoS attack on my time. > > See http://www.catwhisker.org/~david/publickey.gpg for public key. > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 18:22:34 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C6F216A4CE for ; Thu, 2 Dec 2004 18:22:34 +0000 (GMT) Received: from rproxy.gmail.com (rproxy.gmail.com [64.233.170.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id BD8CF43D46 for ; Thu, 2 Dec 2004 18:22:33 +0000 (GMT) (envelope-from kjelderg@gmail.com) Received: by rproxy.gmail.com with SMTP id a36so829738rnf for ; Thu, 02 Dec 2004 10:22:33 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=G4c9kPNCo/cxG/C8C71ZA3cLo02U3yS1MCAJq11ViFRR5Lj9lNucLsnxxsmucfBPZUzaO/Av9632ObBPJY5dgc2kgARzuKyxm8w6XeNL2AwPCI9E5hogCMXM7qunyD3o89m5+x55IGuqKQYgKamzFw1USUv7/cZSm6UBUlJC15k= Received: by 10.38.15.77 with SMTP id 77mr258545rno; Thu, 02 Dec 2004 10:22:32 -0800 (PST) Received: by 10.38.15.38 with HTTP; Thu, 2 Dec 2004 10:22:32 -0800 (PST) Message-ID: Date: Thu, 2 Dec 2004 18:22:32 +0000 From: Eric Kjeldergaard To: freebsd-mobile@freebsd.org In-Reply-To: <20041202125211.GA5766@nl.demon.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit References: <41AD9D12.2020506@hacksocke.de> <16814.23799.439022.760893@osprey.kermodei.com> <20041202.130802.40349122.hanche@math.ntnu.no> <20041202125211.GA5766@nl.demon.net> Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Eric Kjeldergaard List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 18:22:34 -0000 > > While I agree that the beep is annoying, and will probably employ your > > patch on my laptop (thanks!), I might mention that the beep is > > probably there for a good reason: As an aid to booting machines with > > just a serial console attached. See "Tips for Serial Console Users" > > in INSTALL.TXT. An easy option to installing a beepless boot loader > > might be welcome, but making the default silent is probably not a good > > idea. > > I think making the beep optional, default = off is a much better > idea. If you're going to build a server with only serial console > support, you need to know what you're doing anyway. > I think deciding the default is pretty trivial, but the important thing is that we get an easy .conf file option, if someone is willing to step up to the plate on it. -- If I write a signature, my emails will appear more personalised. From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 18:37:19 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C4E6B16A4CE for ; Thu, 2 Dec 2004 18:37:19 +0000 (GMT) Received: from kermodei.com (kermodei.com [216.103.110.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 94AD043D1D for ; Thu, 2 Dec 2004 18:37:19 +0000 (GMT) (envelope-from markd@kermodei.com) Received: from localhost (localhost [127.0.0.1]) by kermodei.com (Postfix) with ESMTP id 6ECD75C71; Thu, 2 Dec 2004 10:35:55 -0800 (PST) Received: from kermodei.com ([127.0.0.1]) by localhost (osprey.kermodei.com [127.0.0.1]) (amavisd-new, port 10025) with ESMTP id 84202-05; Thu, 2 Dec 2004 10:35:52 -0800 (PST) Received: by kermodei.com (Postfix, from userid 1000) id 011825C6A; Thu, 2 Dec 2004 10:35:51 -0800 (PST) From: Mark Diekhans MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <16815.24711.763805.677082@osprey.kermodei.com> Date: Thu, 2 Dec 2004 10:35:51 -0800 To: Eric Kjeldergaard In-Reply-To: References: <41AD9D12.2020506@hacksocke.de> <16814.23799.439022.760893@osprey.kermodei.com> <20041202.130802.40349122.hanche@math.ntnu.no> <20041202125211.GA5766@nl.demon.net> X-Mailer: VM 7.18 under Emacs 21.3.1 cc: freebsd-mobile@freebsd.org Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 18:37:19 -0000 Eric Kjeldergaard writes: > I think deciding the default is pretty trivial, but the important > thing is that we get an easy .conf file option, if someone is willing > to step up to the plate on it. Since I have already figure out how to this, I would be willing to do the work, provided there is a committer who will work with me on it and see that it gets checked in. Don't want to invest time and then have it reach a deadend. markd From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 19:14:53 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AED3616A4CE for ; Thu, 2 Dec 2004 19:14:53 +0000 (GMT) Received: from antivirus.uni-rostock.de (antivirus.uni-rostock.de [139.30.8.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id E2D0B43D5A for ; Thu, 2 Dec 2004 19:14:52 +0000 (GMT) (envelope-from karsten.rothemund@uni-rostock.de) Received: from antivirus.exch.rz.uni-rostock.de ([127.0.0.1]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Thu, 2 Dec 2004 20:14:52 +0100 Received: from antivirus.uni-rostock.de (unverified) by antivirus.exch.rz.uni-rostock.de for ; Thu, 2 Dec 2004 20:14:51 +0100 Received: from mail.uni-rostock.de ([139.30.8.11]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Thu, 2 Dec 2004 20:14:51 +0100 Received: from conversion-daemon.mail2.uni-rostock.de by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) id <0I8300B01ZOP20@mail.uni-rostock.de> (original mail from karsten.rothemund@uni-rostock.de) for freebsd-mobile@freebsd.org; Thu, 02 Dec 2004 20:14:51 +0100 (MET) Received: from Worf.mydomain.home (B5c90.b.pppool.de [213.7.92.144]) by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTPA id <0I83001EFXC7AX@mail.uni-rostock.de> for freebsd-mobile@freebsd.org; Thu, 02 Dec 2004 19:14:33 +0100 (MET) Date: Thu, 02 Dec 2004 19:07:37 +0100 From: Karsten Rothemund To: FreeBSD Mobile Message-id: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> Organization: private site MIME-version: 1.0 X-Mailer: Sylpheed version 0.9.99-gtk2-20041024 (GTK+ 2.4.13; i386-portbld-freebsd5.3) Content-type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Signature=_Thu__2_Dec_2004_19_07_37_+0100__jjTkl4v+t4jfJ7q" X-OriginalArrivalTime: 02 Dec 2004 19:14:51.0950 (UTC) FILETIME=[32F67CE0:01C4D8A3] Subject: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 19:14:53 -0000 --Signature=_Thu__2_Dec_2004_19_07_37_+0100__jjTkl4v+t4jfJ7q Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: 7bit Hello all out there, I think of moving from Gentoo-Linux to FreeBSD 5.3 with my laptop (DELL Inspiron 8100). I have to repartition anyway and I think about building a suspend-to-disk partition. The question is, does it work with FreeBSD? Anyone here experienced with FreeBSD and suspend-to-disk? Pointers to docs are also welcome. Greetings from the Baltic Sea, -- Karsten Rothemund GnuPG-Key-ID: 8B67404C (Please use it) GnuPG-Key Fingerprint: AD34 7314 EE3A 7B9F E7A2 23F6 E35D 76D6 8B67 404C --Signature=_Thu__2_Dec_2004_19_07_37_+0100__jjTkl4v+t4jfJ7q Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFBr1np41121otnQEwRAp+8AJ46ZEHB+wgb3Fh+pN2dcTMq1jjV8wCgiGPV 5K6BXAqTIWbbTy18REGhlIU= =0vWG -----END PGP SIGNATURE----- --Signature=_Thu__2_Dec_2004_19_07_37_+0100__jjTkl4v+t4jfJ7q-- From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 19:23:05 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BE89C16A4CF for ; Thu, 2 Dec 2004 19:23:05 +0000 (GMT) Received: from rproxy.gmail.com (rproxy.gmail.com [64.233.170.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0530E43D31 for ; Thu, 2 Dec 2004 19:23:05 +0000 (GMT) (envelope-from kjelderg@gmail.com) Received: by rproxy.gmail.com with SMTP id a36so835780rnf for ; Thu, 02 Dec 2004 11:23:04 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:references; b=Rx2y5FaG6tm8qWZYG5zJwN21MVK3Uwwppp9gfbElmIxgNuXdKLNOeHyF6AaMq1o9QHsNAlq9oYwV7uN6x6T0YYP55aEyeWkMTP+R1I/uI9CzzUwYUbOnVZGWaXWiByQC5Pg+BXKYi8Ip0vrts8kQlMT0BptzoRv5ilUjjccTcnU= Received: by 10.38.82.2 with SMTP id f2mr981612rnb; Thu, 02 Dec 2004 11:23:03 -0800 (PST) Received: by 10.38.15.38 with HTTP; Thu, 2 Dec 2004 11:23:03 -0800 (PST) Message-ID: Date: Thu, 2 Dec 2004 19:23:03 +0000 From: Eric Kjeldergaard To: Karsten Rothemund In-Reply-To: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit References: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> cc: FreeBSD Mobile Subject: Re: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Eric Kjeldergaard List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 19:23:05 -0000 > The question is, does it work with FreeBSD? Anyone here experienced with > FreeBSD and suspend-to-disk? Pointers to docs are also welcome. Well, it doesn't exist yet, but there is a current thread in the mailing lists that seems to be putting it on a wish-list for things to add in the next 12 or so months. Hopefully we will soon see it. On a brighter note, suspend-to-ram works for many systems out-of-the-box and takes very little battery power (1% per 8 - 12 hours on my system) and it also seems to suspend to ram a lot faster than Linux or Windows. -- If I write a signature, my emails will appear more personalised. From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 21:39:31 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DF35616A4CE for ; Thu, 2 Dec 2004 21:39:31 +0000 (GMT) Received: from graf.pompo.net (graf.pompo.net [81.56.186.139]) by mx1.FreeBSD.org (Postfix) with ESMTP id 795E343D55 for ; Thu, 2 Dec 2004 21:39:31 +0000 (GMT) (envelope-from thierry@pompo.net) Received: by graf.pompo.net (Postfix, from userid 1001) id 760797670; Thu, 2 Dec 2004 21:36:41 +0100 (CET) Date: Thu, 2 Dec 2004 21:36:41 +0100 From: Thierry Thomas To: David Wolfskill Message-ID: <20041202203641.GF54365@graf.pompo.net> Mail-Followup-To: David Wolfskill , mobile@freebsd.org References: <200412020105.iB215hia004502@bunrab.catwhisker.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <200412020105.iB215hia004502@bunrab.catwhisker.org> X-Face: (hRbQnK~Pt7$ct`!fupO(`y_WL4^-Iwn4@ly-.,[4xC4xc; y=\ipKMNm<1J>lv@PP~7Z<.t KjAnXLs: User-Agent: Mutt/1.4.2.1i X-Operating-System: FreeBSD 4.10-STABLE i386 Organization: Kabbale Eros X-PGP: 0xC71405A2 cc: mobile@freebsd.org Subject: Re: Susceptibility of Dell 8200 to thermal stress/fatigue? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 21:39:32 -0000 Le Jeu 2 déc 04 à 2:05:43 +0100, David Wolfskill écrivait : > Now, it looks as if the Dell Latitude C840 is fairly similar to the > Inspiron 8200. As far as running FreEBSD on the machine, are there any > salient differences? My company's machine is also an Inspiron 8200, and it was quite noisy. One day, a Dell tech came on the spot, and I asked him about that. He explained me that this is a known problem: Latitude and Inspiron are similar, but Inspiron has two fans, and several Inspiron have been misconfigured as Latitude, and only one fan is used. You can check the back of your laptop and see how many fan(s) turn(s). He flashed my BIOS from his CD, and the problem has been solved [unless I recompile KDE or run some heavy program ;-) ]. Regards, -- Th. Thomas. From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 23:09:53 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5228D16A4CE for ; Thu, 2 Dec 2004 23:09:53 +0000 (GMT) Received: from fiinbeck.math.ntnu.no (fiinbeck.math.ntnu.no [129.241.15.140]) by mx1.FreeBSD.org (Postfix) with SMTP id BEE0A43D31 for ; Thu, 2 Dec 2004 23:09:51 +0000 (GMT) (envelope-from hanche+bounces@math.ntnu.no) Received: (qmail 3592 invoked from network); 2 Dec 2004 23:09:50 -0000 Received: from localhost (127.0.0.1) by localhost with SMTP; 2 Dec 2004 23:09:50 -0000 Date: Fri, 03 Dec 2004 00:09:50 +0100 (CET) Message-Id: <20041203.000950.108742455.hanche@math.ntnu.no> To: freebsd-mobile@freebsd.org From: Harald Hanche-Olsen In-Reply-To: <20041202125211.GA5766@nl.demon.net> References: <16814.23799.439022.760893@osprey.kermodei.com> <20041202.130802.40349122.hanche@math.ntnu.no> <20041202125211.GA5766@nl.demon.net> X-URL: http://www.math.ntnu.no/~hanche/ X-Mailer: Mew version 3.3 on Emacs 21.3 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: Re: 5.3 Startup with a beep X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 23:09:53 -0000 [ This one never made it to the list because the mail I replied to said Reply-To: jes@nl.demon.net. Please don't *do* that. ] + Jim Segrave : | I think making the beep optional, default = off is a much better | idea. If you're going to build a server with only serial console | support, you need to know what you're doing anyway. Well okay, maybe you have a point. Just so long as the installation CD comes with a beep. - Harald From owner-freebsd-mobile@FreeBSD.ORG Thu Dec 2 23:18:24 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 91EF116A4CE for ; Thu, 2 Dec 2004 23:18:24 +0000 (GMT) Received: from netserver2.cyonisp.net (69-3-40-56.sdsl.lbdsl.net [69.3.40.56]) by mx1.FreeBSD.org (Postfix) with ESMTP id 644B743D2D for ; Thu, 2 Dec 2004 23:18:21 +0000 (GMT) (envelope-from julesg@newebmail.com) Received: from [192.168.0.123] (pool-151-199-27-183.bos.east.verizon.net [151.199.27.183]) (authenticated (0 bits))iB1Egu78002136 for ; Wed, 1 Dec 2004 09:43:07 -0500 Message-ID: <41AFA29C.5060405@newebmail.com> Date: Thu, 02 Dec 2004 18:17:48 -0500 From: Jules Gilbert User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: talking to a DOS floppy, at least X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 02 Dec 2004 23:18:24 -0000 I can read a DOS floppy under my FB5.2.1, on a DELL 1150 Inspiron system with an external floppy. But I can not write to a floppy. What do I do fix this? --jg PS: If you tell me what info I need to collect and come back with, I shall do so... From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 00:05:47 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F6C116A4CE for ; Fri, 3 Dec 2004 00:05:47 +0000 (GMT) Received: from cheese.thcproductions.com (cheese.thcproductions.com [65.65.124.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id DFE3E43D53 for ; Fri, 3 Dec 2004 00:05:46 +0000 (GMT) (envelope-from tenebrae@thcproductions.com) Received: from localhost.thcproductions.com ([127.0.0.1]) by cheese.thcproductions.com with esmtp (Exim 4.42) id I84DLL-0007SS-IJ for freebsd-mobile@freebsd.org; Thu, 02 Dec 2004 18:05:46 -0600 Message-ID: <41AFADD4.9060100@thcproductions.com> Date: Thu, 02 Dec 2004 18:05:40 -0600 From: tenebrae User-Agent: Mail Client (compatible; E-MAIL; Why are you reading this?) - Mail Client, Platform X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-mobile@freebsd.org References: <41AFA29C.5060405@newebmail.com> In-Reply-To: <41AFA29C.5060405@newebmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scan-Signature: 6db2d3dd8b2aa5cb1fba7f1fd7d73158 X-Spam-Score: 0.0 Subject: Re: talking to a DOS floppy, at least X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 00:05:47 -0000 Jules Gilbert wrote: > I can read a DOS floppy under my FB5.2.1, on a DELL 1150 Inspiron > system with an external floppy. > > But I can not write to a floppy. If you're saying that you can't write to a DOS floppy under FreeBSD, I believe that is normal behavior. DOS and NTFS support in FreeBSD is read-only if I'm not mistaken (I'm sure someone will be kind enough to correct me if I am). -W From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 00:08:09 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ADBE516A4CE for ; Fri, 3 Dec 2004 00:08:09 +0000 (GMT) Received: from moek.pir.net (moek.pir.net [130.64.1.215]) by mx1.FreeBSD.org (Postfix) with ESMTP id 510F243D31 for ; Fri, 3 Dec 2004 00:08:09 +0000 (GMT) (envelope-from pir@pir.net) Received: from pir by moek.pir.net with local (Exim) id 1Ca0zY-0005vY-NN for freebsd-mobile@freebsd.org; Thu, 02 Dec 2004 19:08:08 -0500 Date: Thu, 2 Dec 2004 19:08:08 -0500 From: Peter Radcliffe To: freebsd-mobile@freebsd.org Message-ID: <20041203000808.GB20084@pir.net> Mail-Followup-To: freebsd-mobile@freebsd.org References: <41AFA29C.5060405@newebmail.com> <41AFADD4.9060100@thcproductions.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <41AFADD4.9060100@thcproductions.com> User-Agent: Mutt/1.4.2i X-fish: < X-Copy-On-Listmail: Please do NOT Cc: me on list mail. Subject: Re: talking to a DOS floppy, at least X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: freebsd-mobile@freebsd.org List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 00:08:09 -0000 tenebrae probably said: > If you're saying that you can't write to a DOS floppy under FreeBSD, I > believe that is normal behavior. DOS and NTFS support in FreeBSD is > read-only if I'm not mistaken (I'm sure someone will be kind enough to > correct me if I am). You're mistaken. DOS filesystem support has been r/w for years, but you need to have write access to the device. P. -- pir From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 00:09:39 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B7DE16A4CE for ; Fri, 3 Dec 2004 00:09:39 +0000 (GMT) Received: from netserver2.cyonisp.net (69-3-40-56.sdsl.lbdsl.net [69.3.40.56]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7C84943D45 for ; Fri, 3 Dec 2004 00:09:38 +0000 (GMT) (envelope-from julesg@newebmail.com) Received: from [192.168.0.123] (pool-151-199-27-183.bos.east.verizon.net [151.199.27.183]) (authenticated (0 bits))iB1FY478002830; Wed, 1 Dec 2004 10:34:14 -0500 Message-ID: <41AFAE97.5090804@newebmail.com> Date: Thu, 02 Dec 2004 19:08:55 -0500 From: Jules Gilbert User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913) X-Accept-Language: en-us, en MIME-Version: 1.0 To: tenebrae References: <41AFA29C.5060405@newebmail.com> <41AFADD4.9060100@thcproductions.com> In-Reply-To: <41AFADD4.9060100@thcproductions.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: talking to a DOS floppy, at least X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 00:09:39 -0000 no, i write to MS-DOS file system's all the time. Sometimes on floppy, too. But now I am trying to write to a floppy mounted via the USB port, and I get a "busy" whenever I try to write to a floppy. I do a: mount -t msdos /dev/da0 /mnt/flp to get it mounted. --jg tenebrae wrote: > Jules Gilbert wrote: > >> I can read a DOS floppy under my FB5.2.1, on a DELL 1150 Inspiron >> system with an external floppy. >> >> But I can not write to a floppy. > > > > If you're saying that you can't write to a DOS floppy under FreeBSD, I > believe that is normal behavior. DOS and NTFS support in FreeBSD is > read-only if I'm not mistaken (I'm sure someone will be kind enough to > correct me if I am). > -W > > > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > > From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 09:43:57 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A4B5516A4CE for ; Fri, 3 Dec 2004 09:43:57 +0000 (GMT) Received: from a.mx.aegisnet.de (a.mx.aegisnet.de [213.238.36.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id C4AFB43D48 for ; Fri, 3 Dec 2004 09:43:56 +0000 (GMT) (envelope-from cz@aegisnet.biz) Received: (qmail 46047 invoked from network); 3 Dec 2004 09:44:16 -0000 Received: from unknown (HELO galadriel.bbk.hh.aegisnet.de) ([80.171.3.90]) (envelope-sender )encrypted SMTP for ; 3 Dec 2004 09:44:16 -0000 Received: from galadriel.bbk.hh.aegisnet.de (localhost [127.0.0.1]) iB39huiB000864; Fri, 3 Dec 2004 10:43:56 +0100 (CET) (envelope-from cz@aegisnet.biz) Received: (from czimmer@localhost)iB39hter000863; Fri, 3 Dec 2004 10:43:55 +0100 (CET) (envelope-from cz@aegisnet.biz) X-Authentication-Warning: galadriel.bbk.hh.aegisnet.de: czimmer set sender to cz@aegisnet.biz using -f Date: Fri, 3 Dec 2004 10:43:55 +0100 From: Carsten Zimmermann To: freebsd-mobile@freebsd.org Message-ID: <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> Mail-Followup-To: freebsd-mobile@freebsd.org, Karsten Rothemund References: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> User-Agent: Mutt/1.4.2.1i cc: Karsten Rothemund Subject: Re: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 09:43:57 -0000 Hello Karsten, while there's no direct support for software STD, you can still use hardware STD if your BIOS supports it (= `sysctl hw.acpi.s4bios` is set to "1". You can then std with `acpiconf -s 4`. Refer to you BIOS documentation on how to configure a STD partition. My laptop runs with a Phoenix BIOS und uses a tool called "HDPREP(EZ)" for std partiotion creation. Unfortunately I have not got it running so far :( cheers, Carsten Am Thu Dec 02, 2004 at 07:0737PM +0100 schrieb Karsten Rothemund: > Hello all out there, > > I think of moving from Gentoo-Linux to FreeBSD 5.3 with my laptop (DELL > Inspiron 8100). I have to repartition anyway and I think about building > a suspend-to-disk partition. > > The question is, does it work with FreeBSD? Anyone here experienced with > FreeBSD and suspend-to-disk? Pointers to docs are also welcome. > > Greetings from the Baltic Sea, > > -- > Karsten Rothemund > > GnuPG-Key-ID: 8B67404C (Please use it) > GnuPG-Key Fingerprint: AD34 7314 EE3A 7B9F E7A2 23F6 E35D 76D6 8B67 > 404C -- Carsten Zimmermann mailto:cz@aegisnet.biz Tel.: +49-(0)40-98760543 Aegis:Net IT-Dienstleistungen Postfach 620371 22403 Hamburg http://www.aegisnet.biz Info: +49-(0)700-AEGISNET Fax: +49-(0)40-98760547 From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 11:48:37 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1BF3016A4CE for ; Fri, 3 Dec 2004 11:48:37 +0000 (GMT) Received: from antivirus.uni-rostock.de (antivirus.uni-rostock.de [139.30.8.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id F39B743D5A for ; Fri, 3 Dec 2004 11:48:35 +0000 (GMT) (envelope-from karsten.rothemund@uni-rostock.de) Received: from antivirus.exch.rz.uni-rostock.de ([127.0.0.1]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Fri, 3 Dec 2004 12:48:34 +0100 Received: from antivirus.uni-rostock.de (unverified) by antivirus.exch.rz.uni-rostock.de for ; Fri, 3 Dec 2004 12:48:34 +0100 Received: from mail.uni-rostock.de ([139.30.8.11]) by antivirus.uni-rostock.de with Microsoft SMTPSVC(6.0.3790.211); Fri, 3 Dec 2004 12:48:34 +0100 Received: from conversion-daemon.mail2.uni-rostock.de by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) id <0I8500I019ZE1Y@mail.uni-rostock.de> (original mail from karsten.rothemund@uni-rostock.de) for freebsd-mobile@freebsd.org; Fri, 03 Dec 2004 12:48:33 +0100 (MET) Received: from [139.30.91.160] (pfau.e-technik1.uni-rostock.de [139.30.91.160]) by mail2.uni-rostock.de (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I8500BBHA4RM5@mail.uni-rostock.de> for freebsd-mobile@freebsd.org; Fri, 03 Dec 2004 12:48:27 +0100 (MET) Date: Fri, 03 Dec 2004 12:47:46 +0100 From: Karsten Rothemund In-reply-to: <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> To: freebsd-mobile@freebsd.org Message-id: <41B05262.7060400@uni-rostock.de> MIME-version: 1.0 Content-type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary=------------enig39469E417991AA160388BE43 X-Accept-Language: en-us, en User-Agent: Mozilla Thunderbird 0.8 (X11/20040918) X-Enigmail-Version: 0.86.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime References: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> X-OriginalArrivalTime: 03 Dec 2004 11:48:34.0532 (UTC) FILETIME=[04CA8240:01C4D92E] Subject: Re: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 11:48:37 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig39469E417991AA160388BE43 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Carsten Zimmermann wrote: > Hello Karsten, > Hi Carsten, > while there's no direct support for software STD, you can still use > hardware STD if your BIOS supports it (= `sysctl hw.acpi.s4bios` is > set to "1". You can then std with `acpiconf -s 4`. > Ok. Intersting info. > Refer to you BIOS documentation on how to configure a STD partition. My > laptop runs with a Phoenix BIOS und uses a tool called "HDPREP(EZ)" for > std partiotion creation. Unfortunately I have not got it running so far > :( > This might be a problem, because DELL do their own zhing here (own BIOS and there are different tools to create such a partition). But in principle it will have a chance to work. So I will give it a try. Greetings -- Karsten Rothemund, Institut f. Allgemeine Elektrotechnik, Universitaet Rostock Tel.: +49 (0)381 498 3649 E-Mail: karsten.rothemund@etechnik.uni-rostock.de (PGP- and GnuPG-Key available on my HomePage: http://www-ae.e-technik.uni-rostock.de/home/karo/) --------------enig39469E417991AA160388BE43 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFBsFJv41121otnQEwRAjbwAJ0Y+H3PlgaY0pOOYEF3vcJrf8MxjQCg2o0o lliY8YP1DbEi1sKWqTpN7ok= =YH4C -----END PGP SIGNATURE----- --------------enig39469E417991AA160388BE43-- From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 14:08:21 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 648E516A4CE for ; Fri, 3 Dec 2004 14:08:21 +0000 (GMT) Received: from otter3.centtech.com (moat3.centtech.com [207.200.51.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 76C5643D39 for ; Fri, 3 Dec 2004 14:08:02 +0000 (GMT) (envelope-from anderson@centtech.com) Received: from [10.177.171.220] (neutrino.centtech.com [10.177.171.220]) by otter3.centtech.com (8.12.3/8.12.3) with ESMTP id iB3E7MOJ076616; Fri, 3 Dec 2004 08:07:31 -0600 (CST) (envelope-from anderson@centtech.com) Message-ID: <41B07316.8060506@centtech.com> Date: Fri, 03 Dec 2004 08:07:18 -0600 From: Eric Anderson User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.3) Gecko/20041110 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Karsten Rothemund References: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> <41B05262.7060400@uni-rostock.de> In-Reply-To: <41B05262.7060400@uni-rostock.de> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 14:08:21 -0000 Karsten Rothemund wrote: [..snip..] >> Refer to you BIOS documentation on how to configure a STD partition. My >> laptop runs with a Phoenix BIOS und uses a tool called "HDPREP(EZ)" for >> std partiotion creation. Unfortunately I have not got it running so far >> :( >> > This might be a problem, because DELL do their own zhing here (own BIOS > and there are different tools to create such a partition). > > But in principle it will have a chance to work. So I will give it a try. I have a Dell Latitude D600, and I successfully created a S2D partition. I haven't tested it recently - I'll try today and see if it works with 5.3-STABLE. Eric -- ------------------------------------------------------------------------ Eric Anderson Sr. Systems Administrator Centaur Technology When in doubt, mumble; when in trouble, delegate; when in charge, ponder ------------------------------------------------------------------------ From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 20:26:39 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 658D616A4CF for ; Fri, 3 Dec 2004 20:26:39 +0000 (GMT) Received: from rwcrmhc13.comcast.net (rwcrmhc13.comcast.net [204.127.198.39]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1078943D45 for ; Fri, 3 Dec 2004 20:26:39 +0000 (GMT) (envelope-from vladimir@math.uic.edu) Received: from cat.math.uic.edu (c-24-12-126-199.client.comcast.net[24.12.126.199]) by comcast.net (rwcrmhc13) with SMTP id <2004120320263801500n5ga7e>; Fri, 3 Dec 2004 20:26:38 +0000 Received: (qmail 43593 invoked by uid 31415); 3 Dec 2004 20:26:38 -0000 Date: Fri, 3 Dec 2004 14:26:38 -0600 From: Vladimir Egorin To: freebsd-mobile@freebsd.org, Karsten Rothemund Message-ID: <20041203202638.GA43572@math.uic.edu> References: <20041202190737.163cd7af.karsten.rothemund@uni-rostock.de> <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20041203094355.GC739@galadriel.bbk.hh.aegisnet.de> User-Agent: Mutt/1.5.6i Subject: Re: Suspend-to-disk X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 20:26:39 -0000 On Fri, Dec 03, 2004 at 10:43:55AM +0100, Carsten Zimmermann wrote: > Hello Karsten, > > while there's no direct support for software STD, you can still use > hardware STD if your BIOS supports it (= `sysctl hw.acpi.s4bios` is > set to "1". You can then std with `acpiconf -s 4`. > > Refer to you BIOS documentation on how to configure a STD partition. My > laptop runs with a Phoenix BIOS und uses a tool called "HDPREP(EZ)" for > std partiotion creation. Unfortunately I have not got it running so far > :( This won't work on a thinkpad t23 under acpi (apm is fine) -- the half-moon light starts blinking, and the machine hangs. -- Vladimir From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 20:27:55 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 84ADD16A4CE for ; Fri, 3 Dec 2004 20:27:55 +0000 (GMT) Received: from smtp13.wxs.nl (smtp13.wxs.nl [195.121.6.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 370B943D45 for ; Fri, 3 Dec 2004 20:27:55 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp13.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I8500IGFY6EZQ@smtp13.wxs.nl> for freebsd-mobile@freebsd.org; Fri, 03 Dec 2004 21:27:52 +0100 (CET) Date: Fri, 03 Dec 2004 21:27:54 +0100 From: Kiffin Gish To: freebsd-mobile@freebsd.org Message-id: <001701c4d976$91e7c370$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: multipart/mixed; boundary="Boundary_(ID_xxaiqqiJB9MeNIMytFnykw)" Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal X-MS-TNEF-Correlator: 00000000DA18B7C9E0C09641B844D919507EA01684643C00 X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 20:27:55 -0000 This is a multi-part message in MIME format. --Boundary_(ID_xxaiqqiJB9MeNIMytFnykw) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT I decided to dump Windows for good and installed FreeBSD on my laptop. That makes me happy, but I cannot for the life of me connect to the Internet via my Dell TrueMobile PCMCIA-card. I use this: ifconfig wi0 ssis my_ssid wepmode on wepkey 0x12345. I have set the SSID and can see that it works, but what is the syntax of wepkey 0x12345? If my key is 12345 (decimal) do I use 0x12345, the hex-value e.g. 0x3039, or just wepkey 12345? Nothing seems to work. Is there something I am missing? -- Kiffin Rex Gish Gouda, The Netherlands --Boundary_(ID_xxaiqqiJB9MeNIMytFnykw)-- From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 20:29:20 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EB00716A4CE for ; Fri, 3 Dec 2004 20:29:20 +0000 (GMT) Received: from smtp18.wxs.nl (smtp18.wxs.nl [195.121.6.14]) by mx1.FreeBSD.org (Postfix) with ESMTP id A905F43D53 for ; Fri, 3 Dec 2004 20:29:20 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp18.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I85006HDY8UXB@smtp18.wxs.nl> for freebsd-mobile@freebsd.org; Fri, 03 Dec 2004 21:29:19 +0100 (CET) Date: Fri, 03 Dec 2004 21:29:22 +0100 From: Kiffin Gish To: freebsd-mobile@freebsd.org Message-id: <001b01c4d976$c63c5eb0$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: multipart/mixed; boundary="Boundary_(ID_ABQd3QRgTvqrxpomsOvfew)" Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal X-MS-TNEF-Correlator: 00000000DA18B7C9E0C09641B844D919507EA016A4643C00 X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Touchpad woes... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 20:29:21 -0000 This is a multi-part message in MIME format. --Boundary_(ID_ABQd3QRgTvqrxpomsOvfew) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT I cannot get the mouse touchpad to work on my Dell Inspiron 8200 (although my regular usb mouse works fine). Is there some recipe and/or checkoff list I should follow? -- Kiffin Rex Gish Gouda, The Netherlands --Boundary_(ID_ABQd3QRgTvqrxpomsOvfew)-- From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 20:32:20 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 05ABE16A4CE for ; Fri, 3 Dec 2004 20:32:20 +0000 (GMT) Received: from odin.ac.hmc.edu (Odin.AC.HMC.Edu [134.173.32.75]) by mx1.FreeBSD.org (Postfix) with ESMTP id B1FFF43D1D for ; Fri, 3 Dec 2004 20:32:19 +0000 (GMT) (envelope-from brdavis@odin.ac.hmc.edu) Received: from odin.ac.hmc.edu (localhost.localdomain [127.0.0.1]) by odin.ac.hmc.edu (8.13.0/8.13.0) with ESMTP id iB3KXrih023714; Fri, 3 Dec 2004 12:33:53 -0800 Received: (from brdavis@localhost) by odin.ac.hmc.edu (8.13.0/8.13.0/Submit) id iB3KXrlJ023713; Fri, 3 Dec 2004 12:33:53 -0800 Date: Fri, 3 Dec 2004 12:33:53 -0800 From: Brooks Davis To: Kiffin Gish Message-ID: <20041203203353.GE20457@odin.ac.hmc.edu> References: <001701c4d976$91e7c370$9900000a@ZGISH> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="ZInfyf7laFu/Kiw7" Content-Disposition: inline In-Reply-To: <001701c4d976$91e7c370$9900000a@ZGISH> User-Agent: Mutt/1.4.1i X-Virus-Scanned: by amavisd-new X-Spam-Status: No, hits=0.0 required=8.0 tests=none autolearn=no version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on odin.ac.hmc.edu cc: freebsd-mobile@freebsd.org Subject: Re: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 20:32:20 -0000 --ZInfyf7laFu/Kiw7 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 03, 2004 at 09:27:54PM +0100, Kiffin Gish wrote: > I decided to dump Windows for good and installed FreeBSD on my laptop. Th= at > makes me happy, but I cannot for the life of me connect to the Internet v= ia > my Dell TrueMobile PCMCIA-card. >=20 > I use this: >=20 > ifconfig wi0 ssis my_ssid wepmode on wepkey 0x12345. >=20 > I have set the SSID and can see that it works, but what is the syntax of > wepkey 0x12345? If my key is 12345 (decimal) do I use 0x12345, the hex-va= lue > e.g. 0x3039, or just wepkey 12345? >=20 > Nothing seems to work. Is there something I am missing? If the first two characters are 0x then the entry is in HEX (0x12345 is invalid). Otherwise it's an ASCII string. A wep key of the decimal number 12345 is entierly non-sensical. -- Brooks --=20 Any statement of the form "X is the one, true Y" is FALSE. PGP fingerprint 655D 519C 26A7 82E7 2529 9BF0 5D8E 8BE9 F238 1AD4 --ZInfyf7laFu/Kiw7 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBsM2wXY6L6fI4GtQRAqOOAJ9IyllP/OTCpdJL6ESWC2AkHqXCvgCdEvtS fYao89i2qoPAv151vLa7bKI= =wH8o -----END PGP SIGNATURE----- --ZInfyf7laFu/Kiw7-- From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 20:35:31 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4685F16A4CE for ; Fri, 3 Dec 2004 20:35:31 +0000 (GMT) Received: from smtp19.wxs.nl (smtp19.wxs.nl [195.121.6.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id 04E8C43D2F for ; Fri, 3 Dec 2004 20:35:31 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp19.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I850039LYJ4W7@smtp19.wxs.nl> for freebsd-mobile@freebsd.org; Fri, 03 Dec 2004 21:35:30 +0100 (CET) Date: Fri, 03 Dec 2004 21:35:32 +0100 From: Kiffin Gish In-reply-to: <20041203203353.GE20457@odin.ac.hmc.edu> To: 'Brooks Davis' Message-id: <004d01c4d977$a2e7eaa0$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal cc: freebsd-mobile@freebsd.org Subject: RE: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 20:35:31 -0000 On my wireless LAN though I have it set to ASCII 1234 so does that mean the syntax is "wepkey 1234" then? -- Kiffin Rex Gish Gouda, The Netherlands > -----Original Message----- > From: Brooks Davis [mailto:brooks@one-eyed-alien.net] > Sent: Friday, December 03, 2004 21:34 > To: Kiffin Gish > Cc: freebsd-mobile@freebsd.org > Subject: Re: wi0 values like Wepkey etc... > > On Fri, Dec 03, 2004 at 09:27:54PM +0100, Kiffin Gish wrote: > > I decided to dump Windows for good and installed FreeBSD on my laptop. > That > > makes me happy, but I cannot for the life of me connect to the Internet > via > > my Dell TrueMobile PCMCIA-card. > > > > I use this: > > > > ifconfig wi0 ssis my_ssid wepmode on wepkey 0x12345. > > > > I have set the SSID and can see that it works, but what is the syntax of > > wepkey 0x12345? If my key is 12345 (decimal) do I use 0x12345, the hex- > value > > e.g. 0x3039, or just wepkey 12345? > > > > Nothing seems to work. Is there something I am missing? > > If the first two characters are 0x then the entry is in HEX (0x12345 is > invalid). Otherwise it's an ASCII string. A wep key of the decimal > number 12345 is entierly non-sensical. > > -- Brooks > > -- > Any statement of the form "X is the one, true Y" is FALSE. > PGP fingerprint 655D 519C 26A7 82E7 2529 9BF0 5D8E 8BE9 F238 1AD4 From owner-freebsd-mobile@FreeBSD.ORG Fri Dec 3 22:28:10 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7718B16A4CE for ; Fri, 3 Dec 2004 22:28:10 +0000 (GMT) Received: from odin.ac.hmc.edu (Odin.AC.HMC.Edu [134.173.32.75]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3D13A43D39 for ; Fri, 3 Dec 2004 22:28:10 +0000 (GMT) (envelope-from brdavis@odin.ac.hmc.edu) Received: from odin.ac.hmc.edu (localhost.localdomain [127.0.0.1]) by odin.ac.hmc.edu (8.13.0/8.13.0) with ESMTP id iB3MTi7f008007; Fri, 3 Dec 2004 14:29:44 -0800 Received: (from brdavis@localhost) by odin.ac.hmc.edu (8.13.0/8.13.0/Submit) id iB3MTiK0008005; Fri, 3 Dec 2004 14:29:44 -0800 Date: Fri, 3 Dec 2004 14:29:44 -0800 From: Brooks Davis To: Kiffin Gish Message-ID: <20041203222944.GF20457@odin.ac.hmc.edu> References: <20041203203353.GE20457@odin.ac.hmc.edu> <004d01c4d977$a2e7eaa0$9900000a@ZGISH> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="9ADF8FXzFeE7X4jE" Content-Disposition: inline In-Reply-To: <004d01c4d977$a2e7eaa0$9900000a@ZGISH> User-Agent: Mutt/1.4.1i X-Virus-Scanned: by amavisd-new X-Spam-Status: No, hits=0.0 required=8.0 tests=none autolearn=no version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on odin.ac.hmc.edu cc: freebsd-mobile@freebsd.org Subject: Re: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 03 Dec 2004 22:28:10 -0000 --9ADF8FXzFeE7X4jE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable [Please don't top-post.] On Fri, Dec 03, 2004 at 09:35:32PM +0100, Kiffin Gish wrote: > On my wireless LAN though I have it set to ASCII 1234 so does that mean t= he > syntax is "wepkey 1234" then? Yes. -- Brooks > > -----Original Message----- > > From: Brooks Davis [mailto:brooks@one-eyed-alien.net] > > Sent: Friday, December 03, 2004 21:34 > > To: Kiffin Gish > > Cc: freebsd-mobile@freebsd.org > > Subject: Re: wi0 values like Wepkey etc... > >=20 > > On Fri, Dec 03, 2004 at 09:27:54PM +0100, Kiffin Gish wrote: > > > I decided to dump Windows for good and installed FreeBSD on my laptop. > > That > > > makes me happy, but I cannot for the life of me connect to the Intern= et > > via > > > my Dell TrueMobile PCMCIA-card. > > > > > > I use this: > > > > > > ifconfig wi0 ssis my_ssid wepmode on wepkey 0x12345. > > > > > > I have set the SSID and can see that it works, but what is the syntax= of > > > wepkey 0x12345? If my key is 12345 (decimal) do I use 0x12345, the he= x- > > value > > > e.g. 0x3039, or just wepkey 12345? > > > > > > Nothing seems to work. Is there something I am missing? > >=20 > > If the first two characters are 0x then the entry is in HEX (0x12345 is > > invalid). Otherwise it's an ASCII string. A wep key of the decimal > > number 12345 is entierly non-sensical. > >=20 > > -- Brooks > >=20 > > -- > > Any statement of the form "X is the one, true Y" is FALSE. > > PGP fingerprint 655D 519C 26A7 82E7 2529 9BF0 5D8E 8BE9 F238 1AD4 --=20 Any statement of the form "X is the one, true Y" is FALSE. PGP fingerprint 655D 519C 26A7 82E7 2529 9BF0 5D8E 8BE9 F238 1AD4 --9ADF8FXzFeE7X4jE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBsOjXXY6L6fI4GtQRApQ7AJ4z64CjsiawtzzsmdnkmSt4EknLOQCgjDr6 pmu1EPVl3+wYSmFyaH0Usk8= =8E9P -----END PGP SIGNATURE----- --9ADF8FXzFeE7X4jE-- From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 01:55:18 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EEB9516A4CE for ; Sat, 4 Dec 2004 01:55:18 +0000 (GMT) Received: from mta11.adelphia.net (mta11.adelphia.net [68.168.78.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8BA0A43D49 for ; Sat, 4 Dec 2004 01:55:18 +0000 (GMT) (envelope-from parv@chvlva.adelphia.net) Received: from default.chvlva.adelphia.net ([69.160.67.225]) by mta11.adelphia.netESMTP <20041204015518.DVTZ19338.mta11.adelphia.net@default.chvlva.adelphia.net> for ; Fri, 3 Dec 2004 20:55:18 -0500 Received: by default.chvlva.adelphia.net (Postfix, from userid 1000) id 3FB905631; Fri, 3 Dec 2004 20:55:04 -0500 (EST) Date: Fri, 3 Dec 2004 20:55:04 -0500 From: Parv To: f-mobile Message-ID: <20041204015504.GA57312@moo.holy.cow> Mail-Followup-To: f-mobile Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Subject: OT: Post IBM world, or opportunistic purchase of T40 series computer X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 01:55:19 -0000 I was hoping that IBM to introduce newer T series computers such that T42's price, ~US$1690, would drop by about $400-500. Darn ... Now that IBM will stop making PC's(0), including laptops, will that cause any reduction in prices of T4[12] series computers? (0) http://www.wired.com/news/business/0,1367,65916,00.html?tw=wn_tophead_5 - Parv -- From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 05:43:44 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C20B16A4CE for ; Sat, 4 Dec 2004 05:43:44 +0000 (GMT) Received: from sccrmhc13.comcast.net (sccrmhc13.comcast.net [204.127.202.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id CADFC43D46 for ; Sat, 4 Dec 2004 05:43:43 +0000 (GMT) (envelope-from e.schuele@computer.org) Received: from [192.168.214.216] (c-24-1-210-118.client.comcast.net[24.1.210.118]) by comcast.net (sccrmhc13) with ESMTP id <2004120405434201600b9rl1e>; Sat, 4 Dec 2004 05:43:43 +0000 Message-ID: <41B14DF2.1010402@computer.org> Date: Fri, 03 Dec 2004 23:41:06 -0600 From: Eric Schuele User-Agent: Mozilla Thunderbird 0.9 (X11/20041115) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Kiffin Gish References: <001b01c4d976$c63c5eb0$9900000a@ZGISH> In-Reply-To: <001b01c4d976$c63c5eb0$9900000a@ZGISH> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: Touchpad woes... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 05:43:44 -0000 Kiffin Gish wrote: > I cannot get the mouse touchpad to work on my Dell Inspiron 8200 (although > my regular usb mouse works fine). Is there some recipe and/or checkoff list > I should follow? Don't know if it will help but, I had to do the following for my Inspiron 5100 with it's Synaptics Touchpad: Add to /boot/device.hints hint.psm.0.flags="0x1000" Add to /etc/rc.conf moused_enable="YES" moused_port="/dev/psm0" moused_type="auto" HTH > > > > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 06:55:00 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 922AE16A4CE for ; Sat, 4 Dec 2004 06:55:00 +0000 (GMT) Received: from smtpclu-2.eunet.yu (smtpclu-2.eunet.yu [194.247.192.227]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3398543D6D for ; Sat, 4 Dec 2004 06:54:59 +0000 (GMT) (envelope-from kolicz@EUnet.yu) Received: from faust.net (P-2.96.EUnet.yu [213.240.2.96]) by smtpclu-2.eunet.yu (8.12.11/8.12.11) with ESMTP id iB46ssi7024639 for ; Sat, 4 Dec 2004 07:54:55 +0100 Received: by faust.net (Postfix, from userid 1001) id 43D3360EC; Sat, 4 Dec 2004 07:45:43 +0100 (CET) Date: Sat, 4 Dec 2004 07:45:43 +0100 From: Zoran Kolic To: freebsd-mobile@freebsd.org Message-ID: <20041204064543.GA628@faust.net> References: <20041203120111.13C5916A4E3@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20041203120111.13C5916A4E3@hub.freebsd.org> X-Virus-Scan: EUnet-AVAS-Milter X-AVAS-Virus-Status: clean X-Spam-Checker: EUnet-AVAS-Milter X-AVAS-Spam-Score: -3.6 X-AVAS-Spam-Symbols: AWL BAYES_00 Subject: Re: talking ro a DOS floppy, at least X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 06:55:00 -0000 Maybe /dev/daos1 ? ZK From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 09:11:32 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0568716A4CE for ; Sat, 4 Dec 2004 09:11:32 +0000 (GMT) Received: from smtp18.wxs.nl (smtp18.wxs.nl [195.121.6.14]) by mx1.FreeBSD.org (Postfix) with ESMTP id B418043D2D for ; Sat, 4 Dec 2004 09:11:31 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp18.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I8600G12XJ6HV@smtp18.wxs.nl> for freebsd-mobile@freebsd.org; Sat, 04 Dec 2004 10:11:30 +0100 (CET) Date: Sat, 04 Dec 2004 10:11:36 +0100 From: Kiffin Gish In-reply-to: <41B14DF2.1010402@computer.org> To: 'Eric Schuele' Message-id: <003b01c4d9e1$41876dc0$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal cc: freebsd-mobile@freebsd.org Subject: RE: Touchpad woes... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 09:11:32 -0000 I have an Alps Electric Touch Pad (plugged into PS/2 mouse port). Are these settings still correct? -- Kiffin Rex Gish Gouda, The Netherlands > -----Original Message----- > From: owner-freebsd-mobile@freebsd.org [mailto:owner-freebsd- > mobile@freebsd.org] On Behalf Of Eric Schuele > Sent: Saturday, December 04, 2004 06:41 > To: Kiffin Gish > Cc: freebsd-mobile@freebsd.org > Subject: Re: Touchpad woes... > > Kiffin Gish wrote: > > I cannot get the mouse touchpad to work on my Dell Inspiron 8200 > (although > > my regular usb mouse works fine). Is there some recipe and/or checkoff > list > > I should follow? > > Don't know if it will help but, I had to do the following for my > Inspiron 5100 with it's Synaptics Touchpad: > > Add to /boot/device.hints > hint.psm.0.flags="0x1000" > Add to /etc/rc.conf > moused_enable="YES" > moused_port="/dev/psm0" > moused_type="auto" > > HTH > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > freebsd-mobile@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > > To unsubscribe, send any mail to "freebsd-mobile- > unsubscribe@freebsd.org" > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 09:28:43 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4A35116A4CE for ; Sat, 4 Dec 2004 09:28:43 +0000 (GMT) Received: from uni-sb.de (uni-sb.de [134.96.252.33]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4CFED43D1F for ; Sat, 4 Dec 2004 09:28:42 +0000 (GMT) (envelope-from gogo@cs.uni-sb.de) Received: from cs.uni-sb.de (cs.uni-sb.de [134.96.252.31]) by uni-sb.de (8.13.1/2004111100) with ESMTP id iB49SeWd018923 for ; Sat, 4 Dec 2004 10:28:40 +0100 (CET) Received: from mail.cs.uni-sb.de (mail.cs.uni-sb.de [134.96.254.200]) by cs.uni-sb.de (8.13.1/2004111100) with ESMTP id iB49Sd6E028869 for ; Sat, 4 Dec 2004 10:28:39 +0100 (CET) Received: from xantippe (xantippe.cs.uni-sb.de [134.96.240.13]) by mail.cs.uni-sb.de (8.13.1/2004093000) with ESMTP id iB49ScjJ028069 for ; Sat, 4 Dec 2004 10:28:39 +0100 (CET) X-Authentication-Warning: mail.cs.uni-sb.de: Host xantippe.cs.uni-sb.de [134.96.240.13] claimed to be xantippe Received: from eugene.cs.uni-sb.de (localhost) [134.96.240.6] by xantippe with esmtp (Exim 3.35 #1 (Debian))id 1CaWDW-0000SM-00 for ; Sat, 04 Dec 2004 10:28:38 +0100 From: Robert Gogolok To: freebsd-mobile@freebsd.org Date: Sat, 4 Dec 2004 09:28:37 +0000 User-Agent: KMail/1.7.1 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200412040928.37442.gogo@cs.uni-sb.de> Subject: spic device on sony laptops X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 09:28:43 -0000 I have a Sony laptop (PCG-R600HMP). With the release of FreeBSD 5.3 and a PXE installation I was able to finally run FreeBSD on that machine. So long everything seems to work nice for my everyday use. Only the brightness of my display is too dark. Under linux I was able to use spicctrl to control the brithgness (using the sonypi device). I read FreeBSD also supports with the spic driver and in coorparation with SJOG (sysutils/sjog) setting the brightness (or for most people). So I put the following in /boot/loader.conf: hint.spic.0.at="isa" hint.spic.0.port="0x10a0" Result: spic0: device model type = 2 spic0: at port 0x10a0-0x10a4 on isa0 But SJOG doesn't seem to be happy with that: can't find spic PCI device The interal code (or the patches made by the port maintainer ) seem to be refer to a PCI device. Does somebody know more about that issue? (just code some isa calls/code or how I could manage this) Somebody who has a running spic device via isa? To set the brightness.... I asked that question also in the german bsd forum (maybe it's easier to understand than my english sentences here:) https://www.bsdforen.de/showthread.php?t=7701 Greetings, Robert! -- JID: gogo@jabber.cs.uni-sb.de From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 03:42:03 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0FF7616A4CE for ; Sat, 4 Dec 2004 03:42:03 +0000 (GMT) Received: from fed1rmmtao05.cox.net (fed1rmmtao05.cox.net [68.230.241.34]) by mx1.FreeBSD.org (Postfix) with ESMTP id C8B5A43D46 for ; Sat, 4 Dec 2004 03:42:02 +0000 (GMT) (envelope-from rogerlopez@cox.net) Received: from RLOPEZ8 ([68.7.198.50]) by fed1rmmtao05.cox.net (InterMail vM.6.01.04.00 201-2131-117-20041022) with ESMTP id <20041204034200.CGTY27697.fed1rmmtao05.cox.net@RLOPEZ8> for ; Fri, 3 Dec 2004 22:42:00 -0500 From: "RogerLopez" To: Date: Fri, 3 Dec 2004 19:42:01 -0800 Message-ID: <000301c4d9b3$37053cc0$0100a8c0@RLOPEZ8> MIME-Version: 1.0 X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-Mailman-Approved-At: Sat, 04 Dec 2004 13:23:21 +0000 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Sony TR2A and FreeBSD -- any comments? X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 03:42:03 -0000 I also have a PCG-C1VP and am having similar problems as you are. What I learned is that Sony computers run great only with original soft ware. I am looking for some on with the recovery disc for the PCG-C1VP so that I can get my computer back to original. Do you have the original or copy that I may purchase from you? From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 14:16:21 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DB96516A4CE for ; Sat, 4 Dec 2004 14:16:21 +0000 (GMT) Received: from rwcrmhc12.comcast.net (rwcrmhc12.comcast.net [216.148.227.85]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9D0BF43D54 for ; Sat, 4 Dec 2004 14:16:21 +0000 (GMT) (envelope-from e.schuele@computer.org) Received: from [192.168.214.216] (c-24-1-210-118.client.comcast.net[24.1.210.118]) by comcast.net (rwcrmhc12) with ESMTP id <2004120414162101400eblq7e>; Sat, 4 Dec 2004 14:16:21 +0000 Message-ID: <41B1C61C.8090600@computer.org> Date: Sat, 04 Dec 2004 08:13:48 -0600 From: Eric Schuele User-Agent: Mozilla Thunderbird 0.9 (X11/20041115) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Kiffin Gish References: <003b01c4d9e1$41876dc0$9900000a@ZGISH> In-Reply-To: <003b01c4d9e1$41876dc0$9900000a@ZGISH> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: Touchpad woes... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 14:16:22 -0000 Kiffin Gish wrote: > I have an Alps Electric Touch Pad (plugged into PS/2 mouse port). Are these > settings still correct? > Not sure really. My only experience is with the synaptics I have. However a google or two revealed a few people mentioning trying hint.psm.0.flags="0x1000" - or - hint.psm.0.flags="0x800" in your /boot/device.hints. You can always try it. -Eric From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 15:47:53 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6534D16A4CE for ; Sat, 4 Dec 2004 15:47:53 +0000 (GMT) Received: from smtp14.wxs.nl (smtp14.wxs.nl [195.121.6.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0405B43D58 for ; Sat, 4 Dec 2004 15:47:53 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp14.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I8700DONFVSB3@smtp14.wxs.nl> for freebsd-mobile@freebsd.org; Sat, 04 Dec 2004 16:47:52 +0100 (CET) Date: Sat, 04 Dec 2004 16:47:57 +0100 From: Kiffin Gish In-reply-to: <41B1C61C.8090600@computer.org> To: 'Eric Schuele' Message-id: <000001c4da18$a065e880$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal cc: freebsd-mobile@freebsd.org Subject: RE: Touchpad woes... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 15:47:53 -0000 Yes, that's got it working, thanks! Does anyone know the difference between the different flags values, e.g. where is that documented? For example, how can I increase touch pad options like speed etc? -- Kiffin Rex Gish Gouda, The Netherlands > -----Original Message----- > From: Eric Schuele [mailto:e.schuele@computer.org] > Sent: Saturday, December 04, 2004 15:14 > To: Kiffin Gish > Cc: freebsd-mobile@freebsd.org > Subject: Re: Touchpad woes... > > Kiffin Gish wrote: > > I have an Alps Electric Touch Pad (plugged into PS/2 mouse port). Are > these > > settings still correct? > > > Not sure really. My only experience is with the synaptics I have. > However a google or two revealed a few people mentioning trying > > hint.psm.0.flags="0x1000" > - or - > hint.psm.0.flags="0x800" > > in your /boot/device.hints. > > You can always try it. > > -Eric From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 15:55:52 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7774716A4CE for ; Sat, 4 Dec 2004 15:55:52 +0000 (GMT) Received: from smtp19.wxs.nl (smtp19.wxs.nl [195.121.6.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id 335FA43D66 for ; Sat, 4 Dec 2004 15:55:52 +0000 (GMT) (envelope-from kiffin.gish@planet.nl) Received: from ZGISH (ip3e833f72.speed.planet.nl [62.131.63.114]) by smtp19.wxs.nl (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTP id <0I8700BUUG93LS@smtp19.wxs.nl> for freebsd-mobile@freebsd.org; Sat, 04 Dec 2004 16:55:51 +0100 (CET) Date: Sat, 04 Dec 2004 16:55:56 +0100 From: Kiffin Gish In-reply-to: <20041203203353.GE20457@odin.ac.hmc.edu> To: freebsd-mobile@freebsd.org Message-id: <001301c4da19$be08ecb0$9900000a@ZGISH> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Mailer: Microsoft Outlook, Build 10.0.6626 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Importance: Normal X-Priority: 3 (Normal) X-MSMail-priority: Normal Subject: RE: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 15:55:52 -0000 Great, I got it working (almost) with the following: wepmode on wepkey 2:40-bit xxxxxxxx Now status is "associated" but I still cannot get to the internet. I have to go through the wireless router (10.0.0.139) which is connected through the DSL modem (10.0.0.138) etc. I can ping myself (10.0.0.153), but when I try and ping other machines (10.0.0.15x) hooked up via the router, or the router and/or the modem, I get: sendto: Host is down. And when I try to ping my dns server I get: Sendto: No route to host. What about the stationname value? Under my old Windows system it worked fine with these settings, so I know they are alright, but now that I have dumped Windows for good, it would sure be nice to access the network. -- Kiffin Rex Gish Gouda, The Netherlands > -----Original Message----- > From: Brooks Davis [mailto:brooks@one-eyed-alien.net] > Sent: Friday, December 03, 2004 21:34 > To: Kiffin Gish > Cc: freebsd-mobile@freebsd.org > Subject: Re: wi0 values like Wepkey etc... > > On Fri, Dec 03, 2004 at 09:27:54PM +0100, Kiffin Gish wrote: > > I decided to dump Windows for good and installed FreeBSD on my laptop. > That > > makes me happy, but I cannot for the life of me connect to the Internet > via > > my Dell TrueMobile PCMCIA-card. > > > > I use this: > > > > ifconfig wi0 ssis my_ssid wepmode on wepkey 0x12345. > > > > I have set the SSID and can see that it works, but what is the syntax of > > wepkey 0x12345? If my key is 12345 (decimal) do I use 0x12345, the hex- > value > > e.g. 0x3039, or just wepkey 12345? > > > > Nothing seems to work. Is there something I am missing? > > If the first two characters are 0x then the entry is in HEX (0x12345 is > invalid). Otherwise it's an ASCII string. A wep key of the decimal > number 12345 is entierly non-sensical. > > -- Brooks > > -- > Any statement of the form "X is the one, true Y" is FALSE. > PGP fingerprint 655D 519C 26A7 82E7 2529 9BF0 5D8E 8BE9 F238 1AD4 From owner-freebsd-mobile@FreeBSD.ORG Sat Dec 4 17:16:00 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1898B16A4CE for ; Sat, 4 Dec 2004 17:16:00 +0000 (GMT) Received: from rwcrmhc13.comcast.net (rwcrmhc13.comcast.net [204.127.198.39]) by mx1.FreeBSD.org (Postfix) with ESMTP id 89DF743D2D for ; Sat, 4 Dec 2004 17:15:59 +0000 (GMT) (envelope-from e.schuele@computer.org) Received: from [192.168.214.216] (c-24-1-210-118.client.comcast.net[24.1.210.118]) by comcast.net (rwcrmhc13) with ESMTP id <2004120417155601500n7ptoe>; Sat, 4 Dec 2004 17:15:59 +0000 Message-ID: <41B1F033.1030601@computer.org> Date: Sat, 04 Dec 2004 11:13:23 -0600 From: Eric Schuele User-Agent: Mozilla Thunderbird 0.9 (X11/20041115) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Kiffin Gish References: <001301c4da19$be08ecb0$9900000a@ZGISH> In-Reply-To: <001301c4da19$be08ecb0$9900000a@ZGISH> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-mobile@freebsd.org Subject: Re: wi0 values like Wepkey etc... X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2004 17:16:00 -0000 Kiffin Gish wrote: > Great, I got it working (almost) with the following: > > wepmode on wepkey 2:40-bit xxxxxxxx > > Now status is "associated" but I still cannot get to the internet. > > I have to go through the wireless router (10.0.0.139) which is connected > through the DSL modem (10.0.0.138) etc. > > I can ping myself (10.0.0.153), but when I try and ping other machines > (10.0.0.15x) hooked up via the router, or the router and/or the modem, I > get: > > sendto: Host is down. > > And when I try to ping my dns server I get: > > Sendto: No route to host. > > What about the stationname value? > > Under my old Windows system it worked fine with these settings, so I know > they are alright, but now that I have dumped Windows for good, it would sure > be nice to access the network. > Sounds like you do not have a default route or any DNS servers specified. Can you post output to: netstat -r cat /etc/resolv.conf Are you using DHCP?