From owner-freebsd-alpha@FreeBSD.ORG Mon Mar 21 11:01:21 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B475C16A4CE for ; Mon, 21 Mar 2005 11:01:21 +0000 (GMT) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8433E43D48 for ; Mon, 21 Mar 2005 11:01:21 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (peter@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.3/8.13.3) with ESMTP id j2LB1L7I013467 for ; Mon, 21 Mar 2005 11:01:21 GMT (envelope-from owner-bugmaster@freebsd.org) Received: (from peter@localhost) by freefall.freebsd.org (8.13.3/8.13.1/Submit) id j2LB1Kpb013461 for freebsd-alpha@freebsd.org; Mon, 21 Mar 2005 11:01:20 GMT (envelope-from owner-bugmaster@freebsd.org) Date: Mon, 21 Mar 2005 11:01:20 GMT Message-Id: <200503211101.j2LB1Kpb013461@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: peter set sender to owner-bugmaster@freebsd.org using -f From: FreeBSD bugmaster To: freebsd-alpha@FreeBSD.org Subject: Current problem reports assigned to you X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 21 Mar 2005 11:01:21 -0000 Current FreeBSD problem reports Critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2004/12/20] alpha/75317 alpha ATA DMA broken on PCalpha 1 problem total. Serious problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2001/09/10] alpha/30486 alpha AlphaServer DS10 floppy access is broken o [2001/09/10] alpha/30487 alpha Floppy access on AlphaServer DS20 solid l o [2003/02/05] alpha/47952 alpha DEFPA causes machine check with V5.0-rele o [2003/11/10] alpha/59116 alpha [ntfs] mount_ntfs of a Windows 2000-forma o [2004/01/26] alpha/61940 alpha Can't disklabel new disk from FreeBSD/alp o [2004/01/27] alpha/61973 alpha Machine Check on boot-up of AlphaServer 2 f [2004/06/06] alpha/67626 alpha X crashes an alpha machine, resulting reb 7 problems total. Non-critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2001/01/27] alpha/24663 alpha Console output gets scribbled into /var/l o [2001/02/22] alpha/25284 alpha PC164 won't reboot with graphics console o [2001/06/07] alpha/27930 alpha NE2000 not supported on FreeBSD Alpha 4.x o [2001/06/07] alpha/27933 alpha Time jitter under load on FreeBSD 4.3 alp f [2001/07/29] alpha/29299 alpha FreeBSD 4.3 Alpha + Tekram SCSI adapter p o [2001/10/01] alpha/30970 alpha Ensoniq 1371 (Creative chipset) does not o [2002/01/24] alpha/34232 alpha rpc.statd throws alignment errors o [2002/05/13] alpha/38031 alpha osf1.ko not loaded during boot-time of li p [2002/11/12] alpha/45240 alpha pstat -f column headings misaligned on Al o [2003/02/25] alpha/48676 alpha Changing the baud rate of serial consoles o [2003/04/12] alpha/50868 alpha fd0 floppy device is not mapped into /dev o [2004/05/10] alpha/66478 alpha unexpected machine check: panic for 4.9, o [2004/06/13] alpha/67903 alpha hw.chipset.memory: 1099511627776 - thats 13 problems total. From owner-freebsd-alpha@FreeBSD.ORG Thu Mar 24 10:22:19 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 394C016A4CE for ; Thu, 24 Mar 2005 10:22:19 +0000 (GMT) Received: from rproxy.gmail.com (rproxy.gmail.com [64.233.170.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id CCC4A43D1F for ; Thu, 24 Mar 2005 10:22:18 +0000 (GMT) (envelope-from colincowlan@gmail.com) Received: by rproxy.gmail.com with SMTP id z35so722797rne for ; Thu, 24 Mar 2005 02:22:18 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding; b=BUP9Gbiv4Q79ILK08DYwNh3vPSr+Cpocplq510Yv3lvj/kHWzoihJn0qdHv6P0rfQyarBFlijxmt5Z88ID98xnLGzAxsjdvfmfTC35B0A+DQ6CcEfxPmdbtjfCCfS05SVAJXKDhNdkPc6JROkqC8S1ItkslMKQgbQspD8CKXP4E= Received: by 10.11.99.44 with SMTP id w44mr68018cwb; Thu, 24 Mar 2005 02:22:18 -0800 (PST) Received: by 10.11.94.75 with HTTP; Thu, 24 Mar 2005 02:22:18 -0800 (PST) Message-ID: Date: Thu, 24 Mar 2005 10:22:18 +0000 From: colin cowlan To: freebsd-alpha@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: cant read ufs disks created on x86 X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: colin cowlan List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Mar 2005 10:22:19 -0000 I'm realtively new to freebsd and also recentlky aquired an alpha xp1000. its up and running after a bit of trouble with aboot. my problem is now that i have 2 data disks both created with ufs on a freebsd x86 box that i want to move to the alpha. One has a lot of data i want to keep and the other is empty. with both of them imunable to see the paritions when i use bsdlabel thru /stand/sysintall and if i try to create a newfs with bsdlabel i get a coredump. i then used the guidelines in the handbook to make a new newfs and that worked # dd if=/dev/zero of=/dev/ad2 count=2 # disklabel /dev/ad2 | disklabel -B -R -r ad2 /dev/stdin # newfs /dev/ad2c i still had the problem of all the data on the x86 created disk, so i just tried to mount it sushi# dmesg | grep ad3 ad3: 117800MB [239340/16/63] at ata4-slave UDMA33 sushi# mount /dev/ad3 /data3 mount: /dev/ad3 on /data3: incorrect super block sushi# file -s /dev/ad3 /dev/ad3: x86 boot sector im just worried that i cant move an x86 created ufs disk too & from the alpha, if i recreate the disk on the alpha & transfer the data via network and the alpha dies will i be stuck with an unreadble disk ? From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 16:49:29 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9E54416A4CE for ; Fri, 25 Mar 2005 16:49:29 +0000 (GMT) Received: from mail1.seresc.net (mail1.seresc.net [216.177.3.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id 12C2A43D1D for ; Fri, 25 Mar 2005 16:49:29 +0000 (GMT) (envelope-from bdina@seresc.net) Received: (qmail 17570 invoked by uid 107); 25 Mar 2005 16:53:33 -0000 Received: from unknown (HELO mail1.seresc.net) (192.168.10.18) by localhost with SMTP; 25 Mar 2005 16:53:33 -0000 Received: from [10.100.100.92] ([192.168.10.200]) by mail1.seresc.net ([127.0.0.1]) with SMTP (gateway) id A0449E6B6A4; Fri, 25 Mar 2005 11:53:33 -0500 From: Bryan Dina To: freebsd-alpha@freebsd.org Content-Type: text/plain Date: Fri, 25 Mar 2005 11:49:27 -0500 Message-Id: <1111769367.7472.15.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.0.4 (2.0.4-2) Content-Transfer-Encoding: 7bit X-AntiVirus: Virus scanned by Vexira Antivirus program Subject: wtf?? cant get gcj working... X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 16:49:29 -0000 anyone have gcj working under FreeBSD 5.2.x alpha??? I have installed it via the ports tree, it is ver. 4.0, and I stole the libgcj.spec file from my linux box.... I am using bash shell, and have set a CLASSPATH of ./:../, but I can not compile... I get the following error when I try to compile the following source: test.java -- public class test { public static void main(String args[]) { System.out.println("Hello World!"); } } ########## # OUTPUT # ########## test.java:0: error: Can't find default package 'java.lang'. Check the CLASSPATH environment variable and the access to the archives 1 error --Bryan From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 17:24:07 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 05F2F16A4CE for ; Fri, 25 Mar 2005 17:24:07 +0000 (GMT) Received: from fuego.fadesa.es (fuego.fadesa.es [195.55.55.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4AF4943D1D for ; Fri, 25 Mar 2005 17:24:05 +0000 (GMT) (envelope-from bsdalpha@fadesa.es) Received: (from root@localhost) by fuego.fadesa.es (8.9.3p2/8.8.8) id SAA00263 for ; Fri, 25 Mar 2005 18:24:41 +0100 Received: from tierra.fadesa.es(195.55.55.7) by fuego.fadesa.es Fri, 25 Mar 05 18:24:34 +0100 Received: from fadesa.es (filemon.fadesa.es [195.55.55.6] (may be forged)) by tierra.fadesa.es (8.9.3p2/8.8.8) with ESMTP id SAA21475 for ; Fri, 25 Mar 2005 18:23:46 +0100 Sender: fan@fadesa.es Message-ID: <42444922.794080FB@fadesa.es> Date: Fri, 25 Mar 2005 18:23:46 +0100 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" Organization: Inmobiliaria FADESA X-Mailer: Mozilla 4.8 [en] (X11; U; Linux 2.4.27-ow1 i686) X-Accept-Language: gl, en, es MIME-Version: 1.0 To: freebsd-alpha@freebsd.org Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit X-Logged: Logged by tierra.fadesa.es as SAA21475 at Fri Mar 25 18:23:46 2005 Subject: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: bsdalpha@fadesa.es List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 17:24:07 -0000 Hello, It was impossible to me to do work a miata workstation with 5.3, now I'm testing 5.4 and the machine stops while trying to load the Qlogic driver. I wonder if 5.4 will support this alpha. Thanks you. (boot dka0.0.0.107.0 -file kernel -flags a) block 0 of dka0.0.0.107.0 is a valid boot block reading 410 blocks from dka0.0.0.107.0 bootstrap code read in base = 1e6000, image_start = 0, image_bytes = 33400 initializing HWRPB at 2000 initializing page table at 1d8000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x1000000010114 OSF PAL rev: 0x1000000020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 1.2 (root@ds10.samsco.home, Fri Mar 18 17:32:00 UTC 2005) Memory: 196608 k Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x5e5110+0x3d710 syms=[0x8+0x665a0+0x8+0x54b63] - Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK boot -v Entering /boot/kernel/kernel at 0xfffffc0000345b60... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-BETA1 #0: Sat Mar 19 03:48:04 UTC 2005 root@ds10.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e18000. Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e180e0. Digital Personal Workstation (Miata) Digital Personal WorkStation 500au, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=0 extensions=0x1 OSF PAL rev: 0x1000000020116 real memory = 199327744 (190 MB) Physical memory chunk(s): 0x00e38000 - 0x0bd09fff, 183312384 bytes (22377 pages) avail memory = 181174272 (172 MB) null: random: mem: cia0: <2117x Core Logic chipset> cia0: Pyxis, pass 1 cia0: extended capabilities: 1 pcib0: <2117x PCI host bus adapter> on cia0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 4, range 32, base 00009000, size 7, enabled map[14]: type 1, range 32, base 81181000, size 7, enabled found-> vendor=0x1011, dev=0x0019, revid=0x30 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=0 found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000090a0, size 4, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=238 map[10]: type 4, range 32, base 00000170, size 3, enabled map[14]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 1, range 32, base 81170000, size 16, memory disabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=2 class=01-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=239 map[10]: type 1, range 32, base 81180000, size 12, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=234 map[10]: type 1, range 32, base 81140000, size 17, enabled map[14]: type 1, range 32, base 80800000, size 23, enabled map[18]: type 1, range 32, base 80000000, size 23, enabled found-> vendor=0x104c, dev=0x3d07, revid=0x01 bus=0, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0xc0 (48000 ns), maxlat=0xc0 (48000 ns) intpin=a, irq=8 found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=20, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0a90, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x20 (8000 ns), maxlat=0x00 (0 ns) dc0: port 0x9000-0x907f mem 0x81181000-0x8118107f irq 0 at device 3.0 on pci0 dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x9000 miibus0: on dc0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 08:00:2b:86:85:93 dc0: if_start running deferred for Giant dc0: interrupting at CIA irq 0 dc0: [GIANT-LOCKED] isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x90a0-0x90af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x90a0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: interrupting at ISA irq 14 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: interrupting at ISA irq 15 ata1: [MPSAFE] atapci1: port 0x377-0x37a,0x170-0x177 mem 0x81170000-0x8117ffff irq 239 at device 7.2 on pci0 atapci1: failed: rid 0x20 is memory, requested 4 atapci1: unable to map interrupt ata2: channel #0 on atapci1 device_attach: ata2 attach returned 6 ohci0: mem 0x81180000-0x81180fff irq 234 at device 7.3 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81180000 ohci0: (New OHCI DeviceId=0xc6931080) ohci0: interrupting at ISA irq 10 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 12.0 (no driver attached) pcib1: at device 20.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 0 pcib1: I/O decode 0x8000-0x8fff pcib1: memory decode 0x81000000-0x810fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 00008000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x8000-0x80ff map[14]: type 1, range 32, base 81010000, size 12, enabled pcib1: device (null) requested decoded memory range 0x81010000-0x81010fff found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=1, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0057, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.9 isp0: port 0x8000-0x80ff mem 0x81010000-0x81010fff irq 3 at device 4.0 on pci1 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x81010000 isp0: using Memory space register mapping isp0: interrupting at CIA irq 3 isp0: [GIANT-LOCKED] isp0: Ultra Mode Capable isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0 isp0: Last F/W revision was 5.57.1 isp0: 243 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 halted CPU 0 halt code = 5 HALT instruction executed PC = 0 >>> >>>show config Firmware SRM Console: V7.1-2 ARC Console: 5.70 PALcode: VMS PALcode V1.20-16, OSF PALcode V1.22-18 SROM Version: v5.90 Processor DECchip (tm) 21164A-2 Pass ? 500 MHz 96 KBytes SCache 2 MB BCache PYXIS ASIC Pass 257 MEMORY Memory Size = 192Mb Bank Size/Sets Base Addr ------ ---------- --------- 0 64Mb 00000000 1 64Mb 04000000 2 64Mb 08000000 BCache Size = 2Mb Tested Memory = 192Mbytes PCI Bus Bus 00 Slot 03: Digital Semiconductor 21143 Network Controller ewa0.0.0.3.0 08-00-2B-86-85-93 Bus 00 Slot 07: Cypress PCI Peripheral Controller Bus 00 Slot 07: Function 1: PCI IDE dka0.0.0.107.0 Compaq CRD-8322B Bus 00 Slot 07: Function 2: PCI IDE Bus 00 Slot 07: PCI USB Bus 00 Slot 12: ELSA GLoria Synergy Bus 00 Slot 20: DECchip 21152 PCI to PCI Bridge Bus 01 Slot 04: ISP1040 Scsi Controller pkc0.7.0.1004.0 SCSI Bus ID 7 dkc0.0.0.1004.0 IBM DDRS-34560D dkc100.1.0.1004.0 IBM DDRS-34560D dkc1000.10.0.1004.0 IBM DDRS-34560D dkc600.6.0.1004.0 IBM DDRS-34560D mkc500.5.0.1004.0 TLZ10 ISA Slot Device Name Type Enabled BaseAddr IRQ DMA 0 0 MOUSE Embedded Yes 60 12 1 KBD Embedded Yes 60 1 2 COM1 Embedded Yes 3f8 4 3 COM2 Embedded Yes 2f8 3 4 LPT1 Embedded No 3bc 7 5 FLOPPY Embedded Yes 3f0 6 2 6 EIDE Embedded Yes 1f0 14 3f6 15 170 376 7 ES1888 Embedded Yes 220 5 1 5 8 USB Embedded Yes 10 -- -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/IT d- s+:+() a31 C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w--- O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++ G++ e- h+(++) !r !z ------END GEEK CODE BLOCK------ From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 17:44:20 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F65316A4CE for ; Fri, 25 Mar 2005 17:44:20 +0000 (GMT) Received: from srv1.cosmo-project.de (srv1.cosmo-project.de [213.83.6.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5ABA743D53 for ; Fri, 25 Mar 2005 17:44:19 +0000 (GMT) (envelope-from ticso@cicely12.cicely.de) Received: from cicely5.cicely.de (cicely5.cicely.de [10.1.1.7]) (authenticated bits=0)j2PHi2sf097603 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=OK); Fri, 25 Mar 2005 18:44:05 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (cicely12.cicely.de [IPv6:3ffe:400:8d0:301::12]) by cicely5.cicely.de (8.12.10/8.12.10) with ESMTP id j2PHhLVK065439 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 25 Mar 2005 18:43:22 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (localhost [127.0.0.1]) by cicely12.cicely.de (8.12.11/8.12.11) with ESMTP id j2PHhLgD008560; Fri, 25 Mar 2005 18:43:21 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: (from ticso@localhost) by cicely12.cicely.de (8.12.11/8.12.11/Submit) id j2PHhLKG008559; Fri, 25 Mar 2005 18:43:21 +0100 (CET) (envelope-from ticso) Date: Fri, 25 Mar 2005 18:43:21 +0100 From: Bernd Walter To: =?iso-8859-1?B?Sm9z6SBNLiBGYW5kafFv?= Message-ID: <20050325174320.GH2324@cicely12.cicely.de> References: <42444922.794080FB@fadesa.es> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <42444922.794080FB@fadesa.es> X-Operating-System: FreeBSD cicely12.cicely.de 5.2-CURRENT alpha User-Agent: Mutt/1.5.6i X-Spam-Status: No, hits=-4.9 required=3.0 tests=BAYES_00 autolearn=no version=2.64 X-Spam-Report: * -4.9 BAYES_00 BODY: Bayesian spam probability is 0 to 1% * [score: 0.0000] X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on cicely12.cicely.de cc: freebsd-alpha@freebsd.org Subject: Re: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: ticso@cicely.de List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 17:44:20 -0000 On Fri, Mar 25, 2005 at 06:23:46PM +0100, José M. Fandiño wrote: > Hello, > > It was impossible to me to do work a miata workstation > with 5.3, now I'm testing 5.4 and the machine stops while > trying to load the Qlogic driver. I wonder if 5.4 will support > this alpha. Thanks you. Did it ever run any FreeBSD version? It is not unlikely that the qlogic card needs to be in a specific slot to work. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 18:11:37 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2499D16A4CE for ; Fri, 25 Mar 2005 18:11:37 +0000 (GMT) Received: from fuego.fadesa.es (fuego.fadesa.es [195.55.55.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id F1E4043D41 for ; Fri, 25 Mar 2005 18:11:35 +0000 (GMT) (envelope-from bsdalpha@fadesa.es) Received: (from root@localhost) by fuego.fadesa.es (8.9.3p2/8.8.8) id TAA08909 for ; Fri, 25 Mar 2005 19:12:12 +0100 Received: from tierra.fadesa.es(195.55.55.7) by fuego.fadesa.es Fri, 25 Mar 05 19:11:42 +0100 Received: from fadesa.es (filemon.fadesa.es [195.55.55.6] (may be forged)) by tierra.fadesa.es (8.9.3p2/8.8.8) with ESMTP id TAA23836 for ; Fri, 25 Mar 2005 19:10:54 +0100 Sender: fan@fadesa.es Message-ID: <4244542E.82ECC7F8@fadesa.es> Date: Fri, 25 Mar 2005 19:10:54 +0100 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" Organization: Inmobiliaria FADESA X-Mailer: Mozilla 4.8 [en] (X11; U; Linux 2.4.27-ow1 i686) X-Accept-Language: gl, en, es MIME-Version: 1.0 Cc: freebsd-alpha@freebsd.org References: <42444922.794080FB@fadesa.es> <20050325174320.GH2324@cicely12.cicely.de> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable X-Logged: Logged by tierra.fadesa.es as TAA23836 at Fri Mar 25 19:10:54 2005 Subject: Re: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: bsdalpha@fadesa.es List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 18:11:37 -0000 Bernd Walter wrote: > = > On Fri, Mar 25, 2005 at 06:23:46PM +0100, Jos=E9 M. Fandi=F1o wrote: > > Hello, > > > > It was impossible to me to do work a miata workstation > > with 5.3, now I'm testing 5.4 and the machine stops while > > trying to load the Qlogic driver. I wonder if 5.4 will support > > this alpha. Thanks you. > = > Did it ever run any FreeBSD version? Actually it runs FreeBSD 5.2.1-RELEASE. > It is not unlikely that the qlogic card needs to be in a specific slot > to work. it's in pci1:4:0, did you suggest that maybe I must change the slot? = > pciconf -lv dc0@pci0:3:0: class=3D0x020000 card=3D0x00000000 chip=3D0x00191011 rev=3D= 0x30 hdr=3D0x00 vendor =3D 'Digital Equipment Corporation' device =3D 'DC21142/3 PCI/CardBus 10/100 Mbit Ethernet Ctlr' class =3D network subclass =3D ethernet isab0@pci0:7:0: class=3D0x060100 card=3D0x00000000 chip=3D0xc6931080 rev=3D= 0x00 hdr=3D0x00 vendor =3D 'Cypress Semiconductor' device =3D '82C693 PCI to ISA Bridge' class =3D bridge subclass =3D PCI-ISA atapci0@pci0:7:1: class=3D0x010180 card=3D0x00000000 chip=3D0xc6931= 080 rev=3D0x00 hdr=3D0x00 vendor =3D 'Cypress Semiconductor' device =3D '82C693 PCI to ISA Bridge' class =3D mass storage subclass =3D ATA atapci1@pci0:7:2: class=3D0x010100 card=3D0x00000000 chip=3D0xc6931= 080 rev=3D0x00 hdr=3D0x00 vendor =3D 'Cypress Semiconductor' device =3D '82C693 PCI to ISA Bridge' class =3D mass storage subclass =3D ATA ohci0@pci0:7:3: class=3D0x0c0310 card=3D0x00000000 chip=3D0xc6931080 rev=3D= 0x00 hdr=3D0x00 vendor =3D 'Cypress Semiconductor' device =3D '82C693 PCI to ISA Bridge' class =3D serial bus subclass =3D USB none0@pci0:12:0: class=3D0x030000 card=3D0x0a321048 chip=3D0x3d071= 04c rev=3D0x01 hdr=3D0x00 vendor =3D 'Texas Instruments (TI)' device =3D 'TVP4020 AGP Permedia 2' class =3D display subclass =3D VGA pcib1@pci0:20:0: class=3D0x060400 card=3D0x000000dc chip=3D0x00241= 011 rev=3D0x03 hdr=3D0x01 vendor =3D 'Digital Equipment Corporation' device =3D '21151/2 PCI to PCI Bridge' class =3D bridge subclass =3D PCI-PCI isp0@pci1:4:0: class=3D0x010000 card=3D0x00000000 chip=3D0x10201077 rev=3D= 0x05 hdr=3D0x00 vendor =3D 'QLogic Corporation' device =3D 'QLA1020/104x Fast-Wide-SCSI "Fast!SCSI IQ" Host Adapter= ' class =3D mass storage subclass =3D SCSI I'd like to know if other miata owners are testing 5.4? = -- = -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/IT d- s+:+() a31 C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w--- O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++ G++ e- h+(++) !r !z ------END GEEK CODE BLOCK------ From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 19:48:21 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0843A16A4DD for ; Fri, 25 Mar 2005 19:48:21 +0000 (GMT) Received: from srv1.cosmo-project.de (srv1.cosmo-project.de [213.83.6.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3277943D5F for ; Fri, 25 Mar 2005 19:48:20 +0000 (GMT) (envelope-from ticso@cicely12.cicely.de) Received: from cicely5.cicely.de (cicely5.cicely.de [10.1.1.7]) (authenticated bits=0)j2PJm4sf099946 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=OK); Fri, 25 Mar 2005 20:48:06 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (cicely12.cicely.de [IPv6:3ffe:400:8d0:301::12]) by cicely5.cicely.de (8.12.10/8.12.10) with ESMTP id j2PJlKVK066211 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 25 Mar 2005 20:47:20 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (localhost [127.0.0.1]) by cicely12.cicely.de (8.12.11/8.12.11) with ESMTP id j2PJlJcv009284; Fri, 25 Mar 2005 20:47:19 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: (from ticso@localhost) by cicely12.cicely.de (8.12.11/8.12.11/Submit) id j2PJlJbG009283; Fri, 25 Mar 2005 20:47:19 +0100 (CET) (envelope-from ticso) Date: Fri, 25 Mar 2005 20:47:19 +0100 From: Bernd Walter To: =?iso-8859-1?B?Sm9z6SBNLiBGYW5kafFv?= Message-ID: <20050325194718.GN2324@cicely12.cicely.de> References: <42444922.794080FB@fadesa.es> <20050325174320.GH2324@cicely12.cicely.de> <4244542E.82ECC7F8@fadesa.es> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <4244542E.82ECC7F8@fadesa.es> X-Operating-System: FreeBSD cicely12.cicely.de 5.2-CURRENT alpha User-Agent: Mutt/1.5.6i X-Spam-Status: No, hits=-4.9 required=3.0 tests=BAYES_00 autolearn=no version=2.64 X-Spam-Report: * -4.9 BAYES_00 BODY: Bayesian spam probability is 0 to 1% * [score: 0.0000] X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on cicely12.cicely.de cc: freebsd-alpha@freebsd.org Subject: Re: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: ticso@cicely.de List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 19:48:21 -0000 On Fri, Mar 25, 2005 at 07:10:54PM +0100, José M. Fandiño wrote: > Bernd Walter wrote: > > > > On Fri, Mar 25, 2005 at 06:23:46PM +0100, José M. Fandiño wrote: > > > Hello, > > > > > > It was impossible to me to do work a miata workstation > > > with 5.3, now I'm testing 5.4 and the machine stops while > > > trying to load the Qlogic driver. I wonder if 5.4 will support > > > this alpha. Thanks you. > > > > Did it ever run any FreeBSD version? > > Actually it runs FreeBSD 5.2.1-RELEASE. > > > It is not unlikely that the qlogic card needs to be in a specific slot > > to work. > > it's in pci1:4:0, did you suggest that maybe I must change the slot? No - if there are slot specific problems then you have problems with 5.2.1 as well. If you compare boot messages with 5.2.1 - what are the next lines that should have been printed after the problem point? > I'd like to know if other miata owners are testing 5.4? Yes - especially from other MiataGL users. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 20:22:39 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 36D6116A4CE for ; Fri, 25 Mar 2005 20:22:39 +0000 (GMT) Received: from fuego.fadesa.es (fuego.fadesa.es [195.55.55.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id 884DF43D46 for ; Fri, 25 Mar 2005 20:22:37 +0000 (GMT) (envelope-from bsdalpha@fadesa.es) Received: (from root@localhost) by fuego.fadesa.es (8.9.3p2/8.8.8) id VAA00129 for ; Fri, 25 Mar 2005 21:23:14 +0100 Received: from tierra.fadesa.es(195.55.55.7) by fuego.fadesa.es Fri, 25 Mar 05 21:22:55 +0100 Received: from fadesa.es (filemon.fadesa.es [195.55.55.6] (may be forged)) by tierra.fadesa.es (8.9.3p2/8.8.8) with ESMTP id VAA29148 for ; Fri, 25 Mar 2005 21:22:07 +0100 Sender: fan@fadesa.es Message-ID: <424472EF.4CC4B62C@fadesa.es> Date: Fri, 25 Mar 2005 21:22:07 +0100 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" Organization: Inmobiliaria FADESA X-Mailer: Mozilla 4.8 [en] (X11; U; Linux 2.4.27-ow1 i686) X-Accept-Language: gl, en, es MIME-Version: 1.0 Cc: freebsd-alpha@freebsd.org References: <42444922.794080FB@fadesa.es> <20050325174320.GH2324@cicely12.cicely.de> <4244542E.82ECC7F8@fadesa.es> <20050325194718.GN2324@cicely12.cicely.de> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit X-Logged: Logged by tierra.fadesa.es as VAA29148 at Fri Mar 25 21:22:07 2005 Subject: Re: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: bsdalpha@fadesa.es List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 20:22:39 -0000 Bernd Walter wrote: > > > Did it ever run any FreeBSD version? > > > > Actually it runs FreeBSD 5.2.1-RELEASE. > > > > > It is not unlikely that the qlogic card needs to be in a specific slot > > > to work. > > > > it's in pci1:4:0, did you suggest that maybe I must change the slot? > > No - if there are slot specific problems then you have problems with > 5.2.1 as well. > If you compare boot messages with 5.2.1 - what are the next lines > that should have been printed after the problem point? Bernd, the last line printed in 5.4b1 is "isp0: Initiator ID is 7 on Channel 0" whilst in 5.2.1 boot continues. Also "core version" for 5.2.1 is 2.7 and 2.9 in 5.4b1, it might have some relation? Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7 isp0: port 0x8000-0x80ff mem 0x81010000-0x81010fff irq 3 at device 4.0 on pci1 pcib1: device isp0 requested decoded memory range 0x81010000-0x81010fff isp0: using Memory space register mapping isp0: interrupting at CIA irq 3 isp0: Ultra Mode Capable isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0 isp0: Last F/W revision was 5.57.1 isp0: 243 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x64,0x60 on isa0 > atacontrol list ATA channel 0: Master: acd0 ATA/ATAPI rev 0 Slave: no device present ATA channel 1: Master: no device present Slave: no device present > camcontrol devlist at scbus0 target 0 lun 0 (pass0,da0) at scbus0 target 1 lun 0 (pass1,da1) at scbus0 target 5 lun 0 (sa0,pass2) at scbus0 target 6 lun 0 (pass3,da2) at scbus0 target 10 lun 0 (pass4,da3) /--------------/ (boot dkc0.0.0.1004.0 -file kernel -flags a) block 0 of dkc0.0.0.1004.0 is a valid boot block reading 15 blocks from dkc0.0.0.1004.0 bootstrap code read in base = 1e6000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 1d8000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Loading /boot/loader Console: SRM firmware console VMS PAL rev: 0x1000000010114 OSF PAL rev: 0x1000000020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.2 (root@demonio.servidores.fadesa, Fri Feb 27 15:29:55 CET 2004) Memory: 196608 k Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x4c75e0+0x42540 syms=[0x8+0x66e10+0x8+0x5044c] /boot/kernel/if_xl.ko text=0xa758 data=0xcc8+0x8 syms=[0x8+0x1200+0x8+0xbdb] Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK boot -v Entering /boot/kernel/kernel at 0xfffffc0000343840... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Thu Feb 26 18:53:44 CET 2004 root@demonio.servidores.fadesa:/usr/src/sys/alpha/compile/NUCLEO Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00008e2000. Preloaded elf module "/boot/kernel/if_xl.ko" at 0xfffffc00008e20e0. Digital Personal Workstation (Miata) Digital Personal WorkStation 500au, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=0 extensions=0x1 OSF PAL rev: 0x1000000020116 real memory = 199327744 (190 MB) Physical memory chunk(s): 0x00904000 - 0x0bd09fff, 188768256 bytes (23043 pages) avail memory = 185409536 (176 MB) null: random: mem: cia0: <2117x Core Logic chipset> cia0: Pyxis, pass 1 cia0: extended capabilities: 1 pcib0: <2117x PCI host bus adapter> on cia0 pci0: on pcib0 pci0: physical bus=0 map[10]: type 4, range 32, base 00009000, size 7, enabled map[14]: type 1, range 32, base 81181000, size 7, enabled found-> vendor=0x1011, dev=0x0019, revid=0x30 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=0 found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[20]: type 4, range 32, base 000090a0, size 4, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=238 map[10]: type 4, range 32, base 00000170, size 3, enabled map[14]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 1, range 32, base 81170000, size 16, memory disabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=2 class=01-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=239 map[10]: type 1, range 32, base 81180000, size 12, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=234 map[10]: type 1, range 32, base 81140000, size 17, enabled map[14]: type 1, range 32, base 80800000, size 23, enabled map[18]: type 1, range 32, base 80000000, size 23, enabled found-> vendor=0x104c, dev=0x3d07, revid=0x01 bus=0, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0xc0 (48000 ns), maxlat=0xc0 (48000 ns) intpin=a, irq=8 found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=20, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x20 (8000 ns), maxlat=0x00 (0 ns) dc0: port 0x9000-0x907f mem 0x81181000-0x8118107f irq 0 at device 3.0 on pci0 dc0: Ethernet address: 08:00:2b:86:85:93 miibus0: on dc0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: interrupting at CIA irq 0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x90a0-0x90af,0x3f4-0x3f7,0x1f0-0x1f7 irq 238 at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4 ata0: at 0x1f0 irq 14 on atapci0 ata0: interrupting at ISA irq 14 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: interrupting at ISA irq 15 ata1: [MPSAFE] atapci1: port 0x374-0x377,0x170-0x177 mem 0x81170000-0x8117ffff irq 239 at device 7.2 on pci0 atapci1: unable to map interrupt ohci0: mem 0x81180000-0x81180fff irq 234 at device 7.3 on pci0 ohci0: (New OHCI DeviceId=0xc6931080) ohci0: interrupting at ISA irq 10 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 12.0 (no driver attached) pcib1: at device 20.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 0 pcib1: I/O decode 0x8000-0x8fff pcib1: memory decode 0x81000000-0x810fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 00008000, size 8, enabled map[14]: type 1, range 32, base 81010000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=1, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7 isp0: port 0x8000-0x80ff mem 0x81010000-0x81010fff irq 3 at device 4.0 on pci1 pcib1: device isp0 requested decoded memory range 0x81010000-0x81010fff isp0: using Memory space register mapping isp0: interrupting at CIA irq 3 isp0: Ultra Mode Capable isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0 isp0: Last F/W revision was 5.57.1 isp0: 243 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x64,0x60 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: the current kbd controller command byte 0003 atkbd: keyboard ID 0x83ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0043 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 1a 03 c8 psm: status 1a 03 c8 psm: status 1a 03 c8 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: interrupting at ISA irq 12 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 499869078 Hz (firmware 500000000 Hz) i8254 clock: 1191057 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency ppc0: using extended I/O port range ppc0: failed to probe at port 0x3bc-0x3c3 irq 7 on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff sbc0: at port 0x220-0x22f irq 5 drq 1 on isa0 sbc0: interrupting at ISA irq 5 pcm0: on sbc0 pcm0: ESS0 detected pcm0: sndbuf_setmap 40b52000, 1000; 0xfffffe0008b6e000 -> b52000 pcm0: sndbuf_setmap 40b54000, 1000; 0xfffffe0008b70000 -> b54000 isa_probe_children: probing PnP devices procfs registered Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounter "alpha" frequency 499869078 Hz quality 0 Timecounters tick every 0.976 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin acd0: CDROM drive at ata0 as master acd0: read 5500KB/s (5500KB/s), 128KB buffer, BIOSPIO acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked, lock protected acd0: Medium: no/blank disc Waiting 5 seconds for SCSI devices to settle isp0: driver initiated bus reset of bus 0 (probe0:isp0:0:0:0): Retrying Command (probe1:isp0:0:1:0): Retrying Command (probe6:isp0:0:6:0): Retrying Command (probe9:isp0:0:10:0): Retrying Command GEOM: create disk da0 dp=0xfffffc0000b7e068 GEOM: create disk da1 dp=0xfffffc000b957c68 GEOM: create disk da2 dp=0xfffffc0000b7d468 GEOM: create disk da3 dp=0xfffffc0000b7ac68 pass0 at isp0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number RDHX1052 GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at isp0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number QD731971 pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass2 at isp0 bus 0 target 5 lun 0 pass2: Removable Sequential Access SCSI-2 device pass2: Serial Number 0005210745 pass2: 10.000MB/s transfers (10.000MHz, offset 8) pass3 at isp0 bus 0 target 6 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number RDHZ7101 pass3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass4 at isp0 bus 0 target 10 lun 0 pass4: Fixed Direct Access SCSI-2 device pass4: Serial Number RD3B5869 pass4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled sa0 at isp0 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: Serial Number 0005210745 sa0: 10.000MB/s transfers (10.000MHz, offset 8) da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number RDHX1052 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number QD731971 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) da2 at isp0 bus 0 target 6 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number RDHZ7101 da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) da3 at isp0 bus 0 target 10 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number RD3B5869 da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) GEOM: Configure da0a, start 0 length 268435456 end 268435455 GEOM: Configure da0b, start 268435456 length 536870912 end 805306367 GEOM: Configure da0c, start 0 length 4569600000 end 4569599999 GEOM: Configure da0e, start 805306368 length 157286400 end 962592767 GEOM: Configure da0f, start 962592768 length 536870912 end 1499463679 GEOM: Configure da0g, start 1499463680 length 262144000 end 1761607679 GEOM: Configure da0h, start 1761607680 length 2807992320 end 4569599999 GEOM: Configure da1c, start 0 length 4569600000 end 4569599999 GEOM: Configure da1e, start 0 length 4569600000 end 4569599999 GEOM: Configure da2c, start 0 length 4569600000 end 4569599999 GEOM: Configure da2e, start 0 length 4569600000 end 4569599999 GEOM: Configure da3a, start 8192 length 4569591808 end 4569599999 GEOM: Configure da3c, start 0 length 4569600000 end 4569599999 Mounting root from ufs:/dev/da0a From owner-freebsd-alpha@FreeBSD.ORG Fri Mar 25 21:37:21 2005 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2120116A4CE for ; Fri, 25 Mar 2005 21:37:21 +0000 (GMT) Received: from srv1.cosmo-project.de (srv1.cosmo-project.de [213.83.6.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4A8A143D46 for ; Fri, 25 Mar 2005 21:37:20 +0000 (GMT) (envelope-from ticso@cicely12.cicely.de) Received: from cicely5.cicely.de (cicely5.cicely.de [10.1.1.7]) (authenticated bits=0)j2PLb4sf002318 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=OK); Fri, 25 Mar 2005 22:37:06 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (cicely12.cicely.de [IPv6:3ffe:400:8d0:301::12]) by cicely5.cicely.de (8.12.10/8.12.10) with ESMTP id j2PLaFVK066955 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 25 Mar 2005 22:36:16 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: from cicely12.cicely.de (localhost [127.0.0.1]) by cicely12.cicely.de (8.12.11/8.12.11) with ESMTP id j2PLaFtW009919; Fri, 25 Mar 2005 22:36:15 +0100 (CET) (envelope-from ticso@cicely12.cicely.de) Received: (from ticso@localhost) by cicely12.cicely.de (8.12.11/8.12.11/Submit) id j2PLaEE0009918; Fri, 25 Mar 2005 22:36:14 +0100 (CET) (envelope-from ticso) Date: Fri, 25 Mar 2005 22:36:14 +0100 From: Bernd Walter To: =?iso-8859-1?B?Sm9z6SBNLiBGYW5kafFv?= Message-ID: <20050325213614.GQ2324@cicely12.cicely.de> References: <42444922.794080FB@fadesa.es> <20050325174320.GH2324@cicely12.cicely.de> <4244542E.82ECC7F8@fadesa.es> <20050325194718.GN2324@cicely12.cicely.de> <424472EF.4CC4B62C@fadesa.es> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <424472EF.4CC4B62C@fadesa.es> X-Operating-System: FreeBSD cicely12.cicely.de 5.2-CURRENT alpha User-Agent: Mutt/1.5.6i X-Spam-Status: No, hits=-4.9 required=3.0 tests=BAYES_00 autolearn=no version=2.64 X-Spam-Report: * -4.9 BAYES_00 BODY: Bayesian spam probability is 0 to 1% * [score: 0.0000] X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on cicely12.cicely.de cc: freebsd-alpha@freebsd.org Subject: Re: 5.4b1 on Miata X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: ticso@cicely.de List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 25 Mar 2005 21:37:21 -0000 On Fri, Mar 25, 2005 at 09:22:07PM +0100, José M. Fandiño wrote: > Bernd Walter wrote: > > > > Did it ever run any FreeBSD version? > > > > > > Actually it runs FreeBSD 5.2.1-RELEASE. > > > > > > > It is not unlikely that the qlogic card needs to be in a specific slot > > > > to work. > > > > > > it's in pci1:4:0, did you suggest that maybe I must change the slot? > > > > No - if there are slot specific problems then you have problems with > > 5.2.1 as well. > > If you compare boot messages with 5.2.1 - what are the next lines > > that should have been printed after the problem point? > > Bernd, > > the last line printed in 5.4b1 is "isp0: Initiator ID is 7 on Channel 0" > whilst in 5.2.1 boot continues. > > Also "core version" for 5.2.1 is 2.7 and 2.9 in 5.4b1, it might have > some relation? > > Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7 > isp0: port 0x8000-0x80ff mem 0x81010000-0x81010fff irq 3 at device 4.0 on pci1 > pcib1: device isp0 requested decoded memory range 0x81010000-0x81010fff > isp0: using Memory space register mapping > isp0: interrupting at CIA irq 3 > isp0: Ultra Mode Capable > isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0 > isp0: Last F/W revision was 5.57.1 > isp0: 243 max I/O commands supported > isp0: Initiator ID is 7 on Channel 0 > ata: ata0 already exists; skipping it > ata: ata1 already exists; skipping it Ah - I remember there was a discussion with Cypress ata chips a while back. Since you are already running 5.2.1 you might want to try a self compiled kernel without ata support. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de