Date: Sun, 4 Jun 2006 19:53:44 -0400 From: Anish Mistry <mistry.7@osu.edu> To: freebsd-acpi@freebsd.org Subject: ASRock K7Upgrade-880 with S3 Message-ID: <200606041953.53027.mistry.7@osu.edu>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I'm trying to get my desktop to STR (S3) and can't even get S3 to semi-powered down state. 6.1-RELEASE-p1 I've updated the BIOS to the latest version. When I do an acpiconf -s 3 the suspend get all the way into the AcpiEnterSleepState function and begins to write registers. The last line I see (with full ACPI debugging enabled): heregs-0708 HwRegisterWrite : ----Entry Then the power light on the case starts to blink seeming to indicate that it is in suspend, except I can still see output on the monitor and the fans and harddrives are still running. Then when I press the power button to try to bring the system back up it then displays: heregs-0708 HwRegisterWrite : ----Exit and then continues with a few more HwRegisterWrite and then exits the AcpiEnterSleepState function and then does nothing. The system shows no life of coming back. I then need to perform a cold boot, because if I just hit the reset button the system doesn't restart to the point where it gets to the BIOS screen. My acpidump output is at: http://am-productions.biz/docs/bigguy.asl I've fixed the errors in the asl and tried using that, but it showed the same problem. http://am-productions.biz/docs/bigguy-fix.asl dmesg: http://am-productions.biz/docs/bigguy.dmesg Windows isn't installed on this system so I can't compare it with that. I tried suspending with Knoppix (2006-06-01) and that worked a bit better. It successfully shutoff the disks on suspend, but the case fans and video card/monitor were still on. When you press the power button again in knoppix it successfully brought the system back to life. Getting it to the point of Knoppix would be a good start. S1 does work, but it doesn't shut anything down, so it's not really useful. hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: S3 hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 5 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_supported: C1/0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% This is probably beyond hope, but I thought I'd ask first. :) -- Anish Mistry [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEg3KQxqA5ziudZT0RAtNVAJ96wWt2jBcXUIUdErB4AGbCCkJGWgCgkvRT SWLwz69k4+uepO91gpkifvE= =e3nx -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606041953.53027.mistry.7>