Date: Sun, 22 Oct 2006 22:20:08 +0200 From: Anders Nordby <anders@FreeBSD.org> To: Peter Blok <pblok@bsd4all.org> Cc: freebsd-acpi@freebsd.org, freebsd-smp@freebsd.org Subject: Re: Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360 ACPIboot problem) Message-ID: <20061022202008.GA32530@fupp.net> In-Reply-To: <000901c6e7a9$0b32b680$8a01a8c0@beast> References: <20061004104415.GB23653@fupp.net> <000901c6e7a9$0b32b680$8a01a8c0@beast>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Nope. This system takes only two processors. It's a 1U system, with not much space. I could however get SMP working by switching to another OS profile (Linux) in the system configuration. The server is old enough to require a (SmartStart) CD for this to happen, I can not access that configuration without it. After I did the change, I can see that the CPU has the feature APIC: CPU: Intel Pentium III (797.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,MMX,FXSR,SSE> Before that, it did not: CPU: Intel Pentium III (797.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> PS: Sorry it took some time to check up on this. The server is in a co-location facility, and I don't go there often. On Wed, Oct 04, 2006 at 01:34:24PM +0200, Peter Blok wrote: > According to the acpidump you have CPU=0 and CPU=3. CPU 1 and CPU 2 are > marked disabled. Are you able to move the CPU hardware wise? > > Peter > > -----Original Message----- > From: owner-freebsd-smp@freebsd.org [mailto:owner-freebsd-smp@freebsd.org] > On Behalf Of Anders Nordby > Sent: Wednesday, October 04, 2006 12:44 PM > To: John Baldwin > Cc: freebsd-acpi@freebsd.org; freebsd-smp@freebsd.org > Subject: Re: Compaq DL 360 SMP problem (was: i386/89545: Compaq DL 360 > ACPIboot problem) > > Hi, > > And old mail here, but I still have this problem getting SMP to work on > the machine. > > On Fri, Jan 06, 2006 at 07:53:17AM -0500, John Baldwin wrote: > >> How can I get SMP running? This worked in 5.x and 4.x, I believe. > > 2) Re: SMP, just to make sure, do you have 'device apic' and 'options SMP' > in > > your kernel? Also, can you provide the output of 'acpidump -t' so I can > see > > what your APIC table (MADT) looks like. Also, does the kernel find SMP if > > > you disable ACPI? > > Yes, apic is enabled in the kernel that I run. ACPI is loaded as a > kernel module. If I disable ACPI, FreeBSD also finds only one processor. > > I still use the custom dsdt as modified after getting instructions by > you in this PR http://www.freebsd.org/cgi/query-pr.cgi?pr=89545. The > modifications are: > > --- vm.asl Sat Jan 7 12:06:14 2006 > +++ vm-fixed.asl Sat Jan 7 12:08:04 2006 > @@ -5,13 +5,13 @@ > /* > RSDT: Length=52, Revision=1, Checksum=69, > OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2, > - Creator ID=Ò, Creator Revision=0x162e > + Creator ID=ASL Creator Revision=0x162e > Entries={ 0x67ffc040, 0x67ffc100, 0x67fff800, 0x67ffc180 } > */ > /* > FACP: Length=116, Revision=1, Checksum=110, > OEMID=COMPAQ, OEM Table ID=MICRO, OEM Revision=0x2, > - Creator ID=Ò, Creator Revision=0x162e > + Creator ID=ASL Creator Revision=0x162e > FACS=0x67ffc0c0, DSDT=0x67ffc200 > INT_MODEL=APIC > Preferred_PM_Profile=Unspecified (0) > @@ -84,7 +84,7 @@ > /* > SPCR: Length=80, Revision=1, Checksum=14, > OEMID=COMPAQ, OEM Table ID=SPCR_ROM, OEM Revision=0x1, > - Creator ID=Ò, Creator Revision=0x162e > + Creator ID=ASL Creator Revision=0x162e > */ > /* > * Intel ACPI Component Architecture > @@ -1573,7 +1573,7 @@ > Else > { > Store ("PCI0._PRT in PIC mode", Debug) > - Return (Package (0x08) > + Return (Package (0x07) > { > Package (0x04) > { > @@ -1588,14 +1588,6 @@ > 0x0001FFFF, > 0x01, > ITR2, > - 0x00 > - }, > - > - Package (0x04) > - { > - 0x0004FFFF, > - 0x00, > - FAKE, > 0x00 > }, > > I'm running 6.1 on the system now, but still FreeBSD sees only one CPU. > When booting the system it lists two: > > Processor 1 initialized at 800/133 MHz with 256 Kbyte Cache > > Processor 2 initialized at 800/133 MHz with 256 Kbyte Cache > > > If I try to run with acpi but without the modified dsdt, I get these > pci/cpu/apic/acpi messages on boot: > > CPU: Intel Pentium III (797.48-MHz 686-class CPU) > acpi0: <COMPAQ MICRO> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci_link0: apparently invalid index 0 > pci0: <ACPI PCI bus> on pcib0 > ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem > 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 > pci0: <display, VGA> at device 3.0 (no driver attached) > pci0: <base peripheral> at device 4.0 (no driver attached) > pcib1: <PCI-PCI bridge> at device 5.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci0: <memory> at device 5.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > atapci0: <ServerWorks ROSB4 UDMA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid > pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid > pci3: <ACPI PCI bus> on pcib2 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem > 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3 > fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem > 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 > ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem > 0xc6bff000-0xc6bfffff irq 9 at device 6.0 on pci3 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 > sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > > With the custom dsdt, I get: > > CPU: Intel Pentium III (797.48-MHz 686-class CPU) > ACPI-0377: *** Info: Table [SSDT] replaced by host OS > ACPI: overriding DSDT/SSDT with custom table > ACPI-0377: *** Info: Table [DSDT] replaced by host OS > acpi0: <COMPAQ MICRO> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem > 0xc5000000-0xc > 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 > pci0: <display, VGA> at device 3.0 (no driver attached) > pci0: <base peripheral> at device 4.0 (no driver attached) > pcib1: <PCI-PCI bridge> at device 5.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci0: <memory> at device 5.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > atapci0: <ServerWorks ROSB4 UDMA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x17 > 7,0x376,0x2800-0x280f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcib2: <ACPI Host-PCI bridge> on acpi0 > pci_link4: BIOS IRQ 7 for 3.4.INTA is invalid > pci_link2: BIOS IRQ 3 for 3.6.INTA is invalid > pci3: <ACPI PCI bus> on pcib2 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem > 0xc6fff000-0xc6fffff > f,0xc6e00000-0xc6efffff irq 10 at device 4.0 on pci3 > fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem > 0xc6dff000-0xc6dffff > f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 > ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem > 0xc6bff000-0xc > 6bfffff irq 9 at device 6.0 on pci3 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 > sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > > If I run without ACPI, I get: > > CPU: Intel Pentium III (797.48-MHz 686-class CPU) > cpu0 on motherboard > pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on > motherboard > pci0: <PCI bus> on pcib0 > ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem > 0xc5000000-0xc > 5ffffff,0xc4000000-0xc4ffffff irq 5 at device 1.0 on pci0 > pci0: <display, VGA> at device 3.0 (no driver attached) > pci0: <base peripheral> at device 4.0 (no driver attached) > pcib1: <PCI-PCI bridge> at device 5.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci0: <memory> at device 5.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > atapci0: <ServerWorks ROSB4 UDMA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x17 > 7,0x376,0x2800-0x280f at device 15.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 3 on > motherboard > pci3: <PCI bus> on pcib3 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem > 0xc6fff000-0xc6fffff > f,0xc6e00000-0xc6efffff irq 7 at device 4.0 on pci3 > fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem > 0xc6dff000-0xc6dffff > f,0xc6c00000-0xc6cfffff irq 10 at device 5.0 on pci3 > ida1: <Compaq Smart Array 4200 controller> port 0x4400-0x44ff mem > 0xc6bff000-0xc > 6bfffff irq 3 at device 6.0 on pci3 > > In any case, I only get one CPU. How to fix? > > Acpidump attached. > > Bye, > > -- > Anders. > > _______________________________________________ > freebsd-smp@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-smp > To unsubscribe, send any mail to "freebsd-smp-unsubscribe@freebsd.org" -- Anders.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061022202008.GA32530>