Date: Sun, 19 Nov 2006 01:14:39 +0900 (JST) From: Ko Nonomura <nonomura@nifty.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/105654: em driver failed to initialize on thinkpad X60 Message-ID: <20061118161439.D9DB05D10@mars3.nodomain> Resent-Message-ID: <200611190110.kAJ1AEVq024330@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 105654
>Category: i386
>Synopsis: em driver failed to initialize on thinkpad X60
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Nov 19 01:10:13 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Ko Nonomura
>Release: FreeBSD 6.2 RC-1 i386
>Organization:
>Environment:
System: FreeBSD 6.2-RC1 #0: Thu Nov 16 05:12:08 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
>Description:
em driver failed to initialize with following error
----
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x2000-0x201f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xee000000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x2000
em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
device_attach: em0 attach returned 5
----
Full boot log is below
----
SMAP type=01 base=0000000000000000 len=000000000009f000
SMAP type=02 base=000000000009f000 len=0000000000001000
SMAP type=02 base=00000000000d2000 len=0000000000002000
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=000000007f5d0000
SMAP type=03 base=000000007f6d0000 len=000000000000f000
SMAP type=04 base=000000007f6df000 len=0000000000021000
SMAP type=02 base=000000007f700000 len=0000000000100000
SMAP type=02 base=000000007f800000 len=0000000000800000
SMAP type=02 base=00000000f0000000 len=0000000004000000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fed00000 len=0000000000000400
SMAP type=02 base=00000000fed14000 len=0000000000004000
SMAP type=02 base=00000000fed18000 len=0000000000001000
SMAP type=02 base=00000000fed19000 len=0000000000001000
SMAP type=02 base=00000000fed1c000 len=0000000000004000
SMAP type=02 base=00000000fed20000 len=0000000000070000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff800000 len=0000000000800000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #0: Thu Nov 16 05:12:08 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b61000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b61250.
Calibrating clock(s) ... i8254 clock: 1193168 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995016368 Hz
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2137849856 (2038 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000007d2a8fff, 2087194624 bytes (509569 pages)
avail memory = 2086895616 (1990 MB)
MP Configuration Table version 1.4 found at 0xc009f5a1
Table 'FACP' at 0x7f6d1b00
Table 'SSDT' at 0x7f6d1cb4
Table 'ECDT' at 0x7f6ded8c
Table 'TCPA' at 0x7f6dedde
Table 'APIC' at 0x7f6dee10
MADT: Found table at 0x7f6dee10
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <LENOVO TP-7B >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f6780
bios32: Entry = 0xfd690 (c00fd690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd620+0x20b
pnpbios: Found PnP BIOS data at 0xc00f6810
pnpbios: Entry = f0000:b36e Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Nov 16 2006 05:11:58)
npx0: INT 16 interface
acpi0: <LENOVO TP-7B> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086)
pcibios: BIOS version 2.10
Found $PIR table, 15 entries at 0xc00fdea0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 27 B 0x61 3 4 5 6 7 10 11 12
embedded 0 28 A 0x68 3 4 5 6 7 10 11 12
embedded 0 28 B 0x69 3 4 5 6 7 10 11 12
embedded 0 28 C 0x6a 3 4 5 6 7 10 11 12
embedded 0 28 D 0x6b 3 4 5 6 7 10 11 12
embedded 0 29 A 0x60 3 4 5 6 7 10 11 12
embedded 0 29 B 0x61 3 4 5 6 7 10 11 12
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12
embedded 0 29 D 0x63 3 4 5 6 7 10 11 12
embedded 0 31 A 0x6b 3 4 5 6 7 10 11 12
embedded 0 31 B 0x60 3 4 5 6 7 10 11 12
embedded 0 31 C 0x60 3 4 5 6 7 10 11 12
embedded 2 0 A 0x68 3 4 5 6 7 10 11 12
slot 1 3 0 A 0x69 3 4 5 6 7 10 11 12
slot 1 3 0 B 0x6a 3 4 5 6 7 10 11 12
slot 2 4 0 A 0x6a 3 4 5 6 7 10 11 12
slot 2 4 0 B 0x6b 3 4 5 6 7 10 11 12
slot 3 12 0 A 0x6b 3 4 5 6 7 10 11 12
slot 3 12 0 B 0x68 3 4 5 6 7 10 11 12
embedded 21 0 A 0x60 3 4 5 6 7 10 11 12
embedded 21 0 B 0x61 3 4 5 6 7 10 11 12
embedded 21 0 C 0x62 3 4 5 6 7 10 11 12
embedded 0 0 A 0x60 3 4 5 6 7 10 11 12
embedded 0 0 B 0x61 3 4 5 6 7 10 11 12
embedded 0 0 C 0x62 3 4 5 6 7 10 11 12
embedded 0 0 D 0x63 3 4 5 6 7 10 11 12
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 29 func 7
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xda354000 pa 0x97000
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x27a0, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27a2, revid=0x03
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 1, range 32, base ee100000, size 19, enabled
map[14]: type 4, range 32, base 00001800, size 3, enabled
map[18]: type 3, range 32, base d0000000, size 28, enabled
map[1c]: type 1, range 32, base ee200000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27a6, revid=0x03
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base ee180000, size 19, enabled
found-> vendor=0x8086, dev=0x27d8, revid=0x02
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base ee240000, size 14, enabled
pcib0: matched entry for 0.27.INTB
pcib0: slot 27 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27d0, revid=0x02
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x27d2, revid=0x02
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x27d4, revid=0x02
bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x27d6, revid=0x02
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c8, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27c9, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27ca, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00001880, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27cc, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base ee444000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2448, revid=0xe2
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b9, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
map[20]: type 4, range 32, base 00001810, size 4, enabled
found-> vendor=0x8086, dev=0x27c5, revid=0x02
bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 000018d0, size 3, enabled
map[14]: type 4, range 32, base 000018c4, size 2, enabled
map[18]: type 4, range 32, base 000018c8, size 3, enabled
map[1c]: type 4, range 32, base 000018c0, size 2, enabled
map[20]: type 4, range 32, base 000018b0, size 4, enabled
map[24]: type 1, range 32, base ee444400, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27da, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 000018e0, size 5, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 23
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xee000000-0xee0fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x8086, dev=0x109a, revid=0x00
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base ee000000, size 17, enabled
pcib1: (null) requested memory range 0xee000000-0xee01ffff: good
map[18]: type 4, range 32, base 00002000, size 5, enabled
pcib1: (null) requested I/O range 0x2000-0x201f: in range
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x2000-0x201f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xee000000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x2000
em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
device_attach: em0 attach returned 5
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0x3000-0x4fff
pcib2: memory decode 0xec000000-0xedffffff
pcib2: prefetched decode 0xe4000000-0xe40fffff
pci3: <ACPI PCI bus> on pcib2
pci3: physical bus=3
found-> vendor=0x168c, dev=0x0024, revid=0x01
bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type 1, range 64, base edf00000, size 16, enabled
pcib2: (null) requested memory range 0xedf00000-0xedf0ffff: good
pcib2: matched entry for 3.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
pci3: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pcib3: secondary bus 4
pcib3: subordinate bus 11
pcib3: I/O decode 0x5000-0x6fff
pcib3: memory decode 0xe8000000-0xe9ffffff
pcib3: prefetched decode 0xe4100000-0xe41fffff
pci4: <ACPI PCI bus> on pcib3
pci4: physical bus=4
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib4: secondary bus 12
pcib4: subordinate bus 19
pcib4: I/O decode 0x7000-0x8fff
pcib4: memory decode 0xea000000-0xebffffff
pcib4: prefetched decode 0xe4200000-0xe42fffff
pci12: <ACPI PCI bus> on pcib4
pci12: physical bus=12
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee444000-0xee4443ff irq 19 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xee444000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x17ef product 0x1000, class 9/0, rev 2.00/0.01, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: secondary bus 21
pcib5: subordinate bus 24
pcib5: I/O decode 0x9000-0xcfff
pcib5: memory decode 0x0-0x0
pcib5: prefetched decode 0x0-0x0
pcib5: Subtractively decoded bridge.
pci21: <ACPI PCI bus> on pcib5
pci21: physical bus=21
found-> vendor=0x1180, dev=0x0476, revid=0xb4
bus=21, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4300000, size 12, enabled
pcib5: (null) requested memory range 0xe4300000-0xe4300fff: good
pcib5: matched entry for 21.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1180, dev=0x0552, revid=0x09
bus=21, slot=0, func=1
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e4301000, size 11, enabled
pcib5: (null) requested memory range 0xe4301000-0xe43017ff: good
pcib5: matched entry for 21.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
found-> vendor=0x1180, dev=0x0822, revid=0x18
bus=21, slot=0, func=2
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e4301800, size 8, enabled
pcib5: (null) requested memory range 0xe4301800-0xe43018ff: good
pcib5: matched entry for 21.0.INTC
pcib5: slot 0 INTC hardwired to IRQ 18
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4300000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700b4 0x00822000
0x10: 0xe4300000 0x020000dc 0xb0181615 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110
0x40: 0x201c17aa 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x04a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00f00000 0x00000000
0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000
0xc0: 0x201c17aa 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: <Ricoh R5C552> mem 0xe4301000-0xe43017ff irq 17 at device 0.1 on pci21
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe4301000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:0a:e4:06:00:43:20:92
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:e4:43:20:92
fwe0: bpf attached
fwe0: Ethernet address: 02:0a:e4:43:20:92
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci21: <base peripheral> at device 0.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
ata1: [MPSAFE]
atapci1: <Intel ICH7M SATA300 controller> port 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem 0xee444400-0xee4447ff irq 16 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xee444400
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci1
ata5: SATA connect status=00000000
ata5: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x4a01 0x4a11 0x4a01 0x4a01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4a01 0x4a01 0x4a01 0x4a01
sio1: probe failed test(s): 0 1 2 4 6 7 9
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4a01 0x4a01 0x4a01 0x4a01
sio1: probe failed test(s): 0 1 2 4 6 7 9
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4a01 0x4a01 0x4a01 0x4a01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
Device configuration finished.
Reducing kern.maxvnodes 133787 -> 100000
procfs registered
lapic: Divisor 2, Frequency 83125215 hz
Timecounter "TSC" frequency 1995016368 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
battery0: battacpi_acad0: acline iery initializanitialtion start
ization start
battery0: bacpi_acad0: On Lineattery initializatio
acpi_acad0: acline n done, tried 1 timeinitialization done,s
tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA33 on ICH7 chip
acd0: <HL-DT-STDVD-ROM GDR8083N/0K03> DVDROM drive at ata0 as master
acd0: read 1722KB/s (4134KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 114473MB <FUJITSU MHV2120BH PL 00840029> at ata2-master SATA150
ad4: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 7 to local APIC 0
ioapic0: Assigning ISA IRQ 7 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 1
INTR: Assigning IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 0
INTR: Assigning IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 1
INTR: Assigning IRQ 15 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 0
INTR: Assigning IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 1
INTR: Assigning IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
Trying to mount root from ufs:/dev/ad4s4a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad4s4b as swap device
Starting file system checks:
/dev/ad4s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s4a: clean, 476571 free (3075 frags, 59187 blocks, 0.6% fragmentation)
/dev/ad4s4e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s4e: clean, 20314742 free (31662 frags, 2535385 blocks, 0.2% fragmentation)
/dev/ad4s4d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s4d: clean, 505438 free (254 frags, 63148 blocks, 0.1% fragmentation)
Mounting local file systems:.
Setting hostname: .
net.inet6.ip6.auto_linklocal: 1 -> 0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
Additional routing options:.
Starting devd.
hw.acpi.cpu.cx_lowest: C1 -> C1
Mounting NFS file systems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files:.
Starting syslogd.
Initial i386 initialization:.
Additional ABI support:.
Starting usbd.
Starting local daemons:.
Updating motd.
Mounting late file systems:.
Configuring syscons: keymap blanktime.
Starting cron.
Local package initialization:.
Additional TCP options:.
Starting default moused:.
Starting background file system checks in 60 seconds.
>How-To-Repeat:
Install 6.2 RC-1 on thinkpad X60
>Fix:
none
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061118161439.D9DB05D10>