Date: Mon, 12 Jun 2006 12:27:03 +0200 From: Robert Nagy <robert@bsd.hu> To: freebsd-ia64@freebsd.org Subject: SGI Altix 350 Message-ID: <20060612102703.GA16381@bsd.hu>
next in thread | raw e-mail | index | archive | help
Hi.
I've tried to boot it just for fun. And I thought I should
send a report to help you guys.
001c01#0c: SGI SAL Version 4.33 rel050928 IP41 built 01:41:32 PM Sep 28, 2005
001c01#0a: SGI SAL Version 4.33 rel050928 IP41 built 01:41:32 PM Sep 28, 2005
EFI Boot Manager ver 1.10 [14.62]
Partition 0: Enabled Disabled
CBricks 1 Nodes 1 0
RBricks 0 CPUs 2 0
IOBricks 1 Mem(GB) 6 0
Device mapping table
fs0 : Acpi(PNP0A03,1)/Pci(1|0)/Ata(Primary,Master)/CDROM(Entry0)
fs1 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig11150800)
fs2 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)/HD(Part2,Sig11150800)
fs3 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig156E702E-ED34-4D17-ACF4-5D6C4AEB32DA)
blk0 : Acpi(PNP0A03,1)/Pci(1|0)/Ata(Primary,Master)
blk1 : Acpi(PNP0A03,1)/Pci(1|0)/Ata(Primary,Master)/CDROM(Entry0)
blk2 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)
blk3 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig11150800)
blk4 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)/HD(Part2,Sig11150800)
blk5 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun1,Lun0)/HD(Part3,Sig11150800)
blk6 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun2,Lun0)
blk7 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun2,Lun0)/HD(Part1,Sig156E702E-ED34-4D17-ACF4-5D6C4AEB32DA)
blk8 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun2,Lun0)/HD(Part2,SigE02C72AD-D564-41A6-B907-D5A6E96FE333)
blk9 : Acpi(PNP0A03,1)/Pci(3|0)/Scsi(Pun2,Lun0)/HD(Part3,Sig2EF9F963-7530-4175-91E9-94E3524A95F8)
fs0:\> bootia64.efi
Consoles: EFI console
Image base: 0x00000034f63c9000
FreeBSD/ia64 EFI boot, Revision 1.1
(root@pluto2.freebsd.org, Tue Jun 6 18:42:44 UTC 2006)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x9feec0+0x42578 syms=[0x8+0x72498+0x8+0x60cf9]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK memmap
Type Physical Virtual #Pages Attr
PalCode 000001000000 000000000000 00001000 UC WB RUNTIME
UnusableMemory 003000000000 000000000000 00000010 UC WB
RuntimeServicesData 003000010000 000000000000 00000070 UC WP RUNTIME
BootServicesData 003000080000 000000000000 00000380 UC
RuntimeServicesData 003000400000 000000000000 00001c00 UC WB WP RUNTIME
RuntimeServicesData 003002000000 000000000000 00001000 UC WB RUNTIME
BootServicesData 003003000000 000000000000 00003000 UC WB
ConventionalMemory 003006000000 000000000000 00076000 UC WB
ConventionalMemory 003400000000 000000000000 000f6349 UC WB
LoaderData 0034f6349000 000000000000 00000080 UC WB
LoaderCode 0034f63c9000 000000000000 00000089 UC WB
BootServicesData 0034f6452000 000000000000 000003ac UC WB
RuntimeServicesData 0034f67fe000 000000000000 00001002 UC WB RUNTIME
BootServicesData 0034f7800000 000000000000 00000001 UC WB
ConventionalMemory 0034f7801000 000000000000 000000bd UC WB
BootServicesData 0034f78be000 000000000000 00000008 UC WB
ConventionalMemory 0034f78c6000 000000000000 00000004 UC WB
BootServicesData 0034f78ca000 000000000000 00000016 UC WB
ConventionalMemory 0034f78e0000 000000000000 00000001 UC WB
BootServicesData 0034f78e1000 000000000000 0000011d UC WB
ConventionalMemory 0034f79fe000 000000000000 00000364 UC WB
RuntimeServicesCode 0034f7d62000 000000000000 0000003a UC WB RUNTIME
BootServicesCode 0034f7d9c000 000000000000 00000062 UC WB
ConventionalMemory 0034f7dfe000 000000000000 00000012 UC WB
RuntimeServicesCode 0034f7e10000 000000000000 0000006e UC WB RUNTIME
ConventionalMemory 0034f7e7e000 000000000000 00000026 UC WB
RuntimeServicesData 0034f7ea4000 000000000000 0000015c UC WB RUNTIME
MemoryMappedIOPortSpace 1ffffffffc000000 000000000000 00004000 UC RUNTIME
OK sal
SAL Revision 2.09
SAL A Version 4.33
SAL B Version 4.33
Desc 0
PAL Proc at 0x1fff800
SAL Proc at 0x1fffc00
SAL GP at 0x1fffc00
Desc 2
Desc 4
Desc 5
Mechanism 0
Vector 0x12
OK lsmod
0xe000000004000000: /boot/kernel/kernel (elf kernel, 0xb145e0)
modules: nfsserver.1 nfslock.1 nfs.1 nfs4.1 if_gif.1 if_faith.1 ether.1 sysvshm.1 sysvsem.1 sysvmsg.1 cd9660.1 pseudofs.1 procfs.1 msdosfs.1 usb.1 cdce.0 random.1 pci.1 null.1 mpt_raid.1 mpt.1 mpt_cam.1 mpt_core.1 miibus.1 mem.1 isp.1 sbp.1 firewire.1 afd.1 acd.1 ataraid.1 atapci.1 ad.1 ata.1 ahc.1 ahd.1 ahd_pci.1 ahc_pci.1 acpi_pci.1 acpi.1 cam.1
0xe000000004b145e0: /boot/mfsroot (mfs_root, 0x800000)
OK boot -v
Entering /boot/kernel/kernel at 0xe000000004060000...
POD entered via MCA, using Cac mode
0 000: POD SysCt Cac>
If I do a contiune from there the box hangs.
And that is it. Linux uses relocatable but I have no idea if that
has anything to do with this.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060612102703.GA16381>