From owner-freebsd-questions@FreeBSD.ORG Sun May 28 00:19:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A263016A735 for ; Sun, 28 May 2006 00:18:43 +0000 (UTC) (envelope-from x.chantry@wanadoo.fr) Received: from smtp9.wanadoo.fr (smtp9.wanadoo.fr [193.252.22.22]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4187D43D48 for ; Sun, 28 May 2006 00:18:43 +0000 (GMT) (envelope-from x.chantry@wanadoo.fr) Received: from wanadoo.fr (AFontenayssB-152-1-42-44.w83-114.abo.wanadoo.fr [83.114.184.44]) by mwinf0902.wanadoo.fr (SMTP Server) with SMTP id 5E7051C001CE for ; Sun, 28 May 2006 02:18:42 +0200 (CEST) X-ME-UUID: 20060528001842386.5E7051C001CE@mwinf0902.wanadoo.fr Received: by wanadoo.fr (nbSMTP-1.00) for uid 1001 x.chantry@wanadoo.fr; Sun, 28 May 2006 02:18:37 +0200 (CEST) Date: Sun, 28 May 2006 02:18:36 +0200 From: Xavier Chantry To: freebsd-questions@freebsd.org Message-ID: <20060528001836.GA42222@ibm.maison> Mail-Followup-To: freebsd-questions@freebsd.org References: <20060527011413.738aecd3@freeBSD> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060527011413.738aecd3@freeBSD> User-Agent: Mutt/1.4.2.1i Subject: Re: Strange pauses and cpu usage - FreeBSD 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 00:19:36 -0000 On Sat, May 27, 2006 at 01:14:13AM +0100, Shawn wrote: > I'm having a strange problem with cpu usage with my Athlon XP. Every so > often there seems to be a pause where the system comes under heavy > load for no apparent reason. If xmms was playing then I get a buzz sound > and the mouse pointer stops just for a split second, the same with > mplayer and vlc. Using Opera or firefox also seems to have a strange > effect where the mouse pointer freezes while pages load, and if there > is an animated gif on the page the cpu usage goes to 100%. > > The jabber client Gajim also makes the cpu get stuck at 100%. When I > used gnome, nautilus did the same thing until i stopped and started the > process in the system monitor. I have searched around and found this > tip from the handbook but it had no effect. > > hint.apic.0.disabled="1" in /boot/loader.conf > > This happens with the generic kernel and the one i compiled for myself. > It also lasts for a random amount of time, sometimes it is barely > noticeable and sometimes it happens for over a second. Running > neverwinter nights makes the system pause for 10-20 seconds seemingly > randomly. > My system behaves much better than that, I've no mouse freeze and no system pauses, but I did have occasonial sound skips using 4bsd on 6.1. Switching to the ULE scheduler seems to fix this problem, but other things may behave worse. One year ago, it was actually the opposite, sound in ULE was really jerky, and mouse pointer too while eg launching an app. Did you already try both schedulers ? From owner-freebsd-questions@FreeBSD.ORG Sun May 28 00:28:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 178A516B12E for ; Sun, 28 May 2006 00:27:26 +0000 (UTC) (envelope-from list-freebsd-2004@morbius.sent.com) Received: from out3.smtp.messagingengine.com (out3.smtp.messagingengine.com [66.111.4.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id B4D1043D46 for ; Sun, 28 May 2006 00:27:25 +0000 (GMT) (envelope-from list-freebsd-2004@morbius.sent.com) Received: from frontend3.internal (frontend3.internal [10.202.2.152]) by frontend1.messagingengine.com (Postfix) with ESMTP id A5A99D6857F for ; Sat, 27 May 2006 20:27:23 -0400 (EDT) Received: from heartbeat1.messagingengine.com ([10.202.2.160]) by frontend3.internal (MEProxy); Sat, 27 May 2006 20:27:24 -0400 X-Sasl-enc: /mV9+dWnODvhqDMd961Nt87NfD7yvH44tGGS3GBaTLKf 1148776044 Received: from bb-87-81-140-128.ukonline.co.uk (bb-87-81-140-128.ukonline.co.uk [87.81.140.128]) by mail.messagingengine.com (Postfix) with ESMTP id 7BC96656B for ; Sat, 27 May 2006 20:27:24 -0400 (EDT) From: RW To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 01:27:18 +0100 User-Agent: KMail/1.9.1 References: <44785997.9020209@thechristies.net> In-Reply-To: <44785997.9020209@thechristies.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605280127.21691.list-freebsd-2004@morbius.sent.com> Subject: Re: min disk size for (useful) desktop X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 00:28:50 -0000 On Saturday 27 May 2006 14:52, Pete C wrote: > . . . looking for advice/guidelines for a minimum disk size for a decent > desktop install of 6-stable with gnome, openoffice, firefox, gimp etc. . Just in case you are not aware, 6-stable is development branch. > > . . . I have both a 20G and a 250G on hand, so I guess the question > really is is 20G enough ? ? ? Probably, if you're not going to store a lot of user files. One caveat: openoffice requires about 9GB of temporary filespace to build from source, and recent binary packages are often hard to find. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 02:38:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9776016C71F for ; Sun, 28 May 2006 02:34:17 +0000 (UTC) (envelope-from yyahmee@mbn.nifty.com) Received: from pxy2nd.nifty.com (pxy2nd.nifty.com [202.248.175.14]) by mx1.FreeBSD.org (Postfix) with SMTP id DA13043D4C for ; Sun, 28 May 2006 02:34:16 +0000 (GMT) (envelope-from yyahmee@mbn.nifty.com) Received: (qmail 22028 invoked from network); Sun, 28 May 2006 11:34:15 +0900 Received: from unknown (HELO GATEWAY) (222.158.58.1) by suserg501.nifty.com with SMTP; Sun, 28 May 2006 11:34:15 +0900 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=pxy2nd-default; d=mbn.nifty.com; b=iQvFfKTr/EzeXtsttkuFwqze8MAeTkkcRoOSZgbYNPDm7vB7WptfJ0ceMJzteEqV4Q44d+Mo5oU3bFjw6kPdBA== ; From: "Yudai Yamagishi" To: Date: Sun, 28 May 2006 11:34:19 +0900 Message-ID: <001c01c681ff$38d1e080$0b0ba8c0@GATEWAY> MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaB/ziaDpKBAlIcTp+CFu6wB0AY6A== Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: namebased VPS using JAIL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 02:38:13 -0000 Hey, I'm trying to serve several VPS for my friends. But, IP addresses costs too much here in Japan. So, I only have 1 WAN IP. I've heard that Virtuozzo let's users create namebased VPS. For example, I want to create a VPS called vps1. I'll assign vps1.codebusterz.net as VPS's address. Then all network traffics for vps1.codebusterz.net will go to vps1. Same with other VPSs by the way. Is this possible using JAIL? Thanks Yudai Yamagishi From owner-freebsd-questions@FreeBSD.ORG Sun May 28 03:28:24 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0D41516AF89 for ; Sun, 28 May 2006 03:28:24 +0000 (UTC) (envelope-from fierykylin@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id 882A643D53 for ; Sun, 28 May 2006 03:28:23 +0000 (GMT) (envelope-from fierykylin@gmail.com) Received: by wx-out-0102.google.com with SMTP id h28so259642wxd for ; Sat, 27 May 2006 20:28:22 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition:x-google-sender-auth; b=awAt4vRTK+HH8fMntxsSoKsljsZ9e23SoKvPMARFHivNtk2IrYi+gMWL9dUQTiDYqKeoEr+GgyO1SsRz4GsLIF6nGgu9f1HILBCJyN7FLyv+vu4fpr2H8CHU1sGugFakB71CpyhBz/aaYZ74UgMr9a7azUpVnms9ZFItnYKrZwA= Received: by 10.70.32.7 with SMTP id f7mr1015459wxf; Sat, 27 May 2006 20:28:22 -0700 (PDT) Received: by 10.70.43.11 with HTTP; Sat, 27 May 2006 20:28:22 -0700 (PDT) Message-ID: <87ab37ab0605272028o54e0a2c9x65cc69ffc6c0e3af@mail.gmail.com> Date: Sun, 28 May 2006 11:28:22 +0800 From: "william wallace" Sender: fierykylin@gmail.com To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Google-Sender-Auth: e504e800ee4b1317 Cc: Subject: what is the use of drm_os_freebsd.h X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 03:28:34 -0000 hi ,all I am porting something from linux to freebsd ,i found the DataTypes hard to translate ,then i saw that many types inlinux can be found in drm_os_freebsd.h,such as typedef int8_t s8; typedef int16_t s16; typedef=09int32_t s32; typedef u_int8_t u8; typedef u_int16_t u16; typedef=09u_int32_t u32; so ,what is the use of drm_os_freebsd.h and any advice for me to translate DT from linux to Freebsd? --=20 we who r about to die,salute u! From owner-freebsd-questions@FreeBSD.ORG Sun May 28 04:24:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9530816AF09 for ; Sun, 28 May 2006 04:24:02 +0000 (UTC) (envelope-from thats@notyourhomework.net) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id A77AE43D4C for ; Sun, 28 May 2006 04:24:01 +0000 (GMT) (envelope-from thats@notyourhomework.net) Received: (qmail 12712 invoked by uid 507); 28 May 2006 14:24:00 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.104?) (220.233.101.28) by jay.exetel.com.au with SMTP; 28 May 2006 14:24:00 +1000 From: Malcolm Fitzgerald To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 14:23:51 +1000 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200605281423.51666.thats@notyourhomework.net> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Configuring local network for Apache22 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 04:24:58 -0000 I'm running a small network behind an ADSL router and one of the machines runs freeBSD 6.0-SECURITY. I'd like to configure it to run apache22. Apache fails to start and gives this error. [Sat May 27 18:49:28 2006] [alert] (EAI 8)hostname nor servname provided, or not known: mod_unique_id: unable to find IPv4 address of "bsd-box." How do I configure Web searches suggest three possibilities 1. that this is a problem with DNS, edit /etc/hosts I've got this line in /etc/hosts 127.0.0.1 localhost localhost.home.net bsd-box.home.net bsd-box 2. Apache is listening to devices that don't exist - I don't know how to explore that suggestion. 3. If your host doesn't have a registered DNS name, enter its IP address in httpd.conf I have this line in httpd.conf ServerName 127.0.0.1 -- malcolm From owner-freebsd-questions@FreeBSD.ORG Sun May 28 04:25:20 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 05EB816AACA for ; Sun, 28 May 2006 04:23:34 +0000 (UTC) (envelope-from parv@pair.com) Received: from mta9.adelphia.net (mta9.adelphia.net [68.168.78.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9A1C043D55 for ; Sun, 28 May 2006 04:23:33 +0000 (GMT) (envelope-from parv@pair.com) Received: from default.chvlva.adelphia.net ([69.160.66.115]) by mta9.adelphia.net (InterMail vM.6.01.05.02 201-2131-123-102-20050715) with ESMTP id <20060528042333.QKXN8718.mta9.adelphia.net@default.chvlva.adelphia.net>; Sun, 28 May 2006 00:23:33 -0400 Received: by default.chvlva.adelphia.net (Postfix, from userid 1000) id 2BA23BB33; Sat, 27 May 2006 23:53:04 -0400 (EDT) Date: Sat, 27 May 2006 23:53:04 -0400 From: Parv To: Pete C Message-ID: <20060528035304.GB2872@holestein.holy.cow> Mail-Followup-To: Pete C , FreeBSD Questions References: <44785997.9020209@thechristies.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <44785997.9020209@thechristies.net> Cc: FreeBSD Questions Subject: Re: min disk size for (useful) desktop X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: f-q List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 04:25:42 -0000 in message <44785997.9020209@thechristies.net>, wrote Pete C thusly... > > looking for advice/guidelines for a minimum disk size for a decent > desktop install of 6-stable with gnome, openoffice, firefox, gimp > etc. . ... > I have both a 20G and a 250G on hand, so I guess the question > really is is 20G enough ? ? ? 20GB disk should be enough unless you are going to build everything that you need from source in one go without cleaning in bewteen. - Parv -- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 05:08:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3220D16AC3C for ; Sun, 28 May 2006 05:02:37 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id B00C643D46 for ; Sun, 28 May 2006 05:02:36 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 8D4E01A4D93 for ; Sat, 27 May 2006 22:02:36 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id E9425514C3; Sun, 28 May 2006 01:02:35 -0400 (EDT) Date: Sun, 28 May 2006 01:02:35 -0400 From: Kris Kennaway To: freebsd-questions@freebsd.org Message-ID: <20060528050235.GA19706@xor.obsecurity.org> References: <20060527011413.738aecd3@freeBSD> <20060528001836.GA42222@ibm.maison> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="PEIAKu/WMn1b1Hv9" Content-Disposition: inline In-Reply-To: <20060528001836.GA42222@ibm.maison> User-Agent: Mutt/1.4.2.1i Subject: Re: Strange pauses and cpu usage - FreeBSD 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 05:08:49 -0000 --PEIAKu/WMn1b1Hv9 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, May 28, 2006 at 02:18:36AM +0200, Xavier Chantry wrote: > On Sat, May 27, 2006 at 01:14:13AM +0100, Shawn wrote: > > I'm having a strange problem with cpu usage with my Athlon XP. Every so > > often there seems to be a pause where the system comes under heavy > > load for no apparent reason. If xmms was playing then I get a buzz sound > > and the mouse pointer stops just for a split second, the same with > > mplayer and vlc. Using Opera or firefox also seems to have a strange > > effect where the mouse pointer freezes while pages load, and if there > > is an animated gif on the page the cpu usage goes to 100%. > >=20 > > The jabber client Gajim also makes the cpu get stuck at 100%. When I > > used gnome, nautilus did the same thing until i stopped and started the > > process in the system monitor. I have searched around and found this > > tip from the handbook but it had no effect. > >=20 > > hint.apic.0.disabled=3D"1" in /boot/loader.conf > >=20 > > This happens with the generic kernel and the one i compiled for myself. > > It also lasts for a random amount of time, sometimes it is barely > > noticeable and sometimes it happens for over a second. Running > > neverwinter nights makes the system pause for 10-20 seconds seemingly > > randomly. > >=20 >=20 > My system behaves much better than that, I've no mouse freeze and no > system pauses, but I did have occasonial sound skips using 4bsd on 6.1. > Switching to the ULE scheduler seems to fix this problem, but other > things may behave worse. > One year ago, it was actually the opposite, sound in ULE was really > jerky, and mouse pointer too while eg launching an app. > Did you already try both schedulers ? Check for interrupt sharing with vmstat -i. Shared interrupts cause performance loss especially if it's sharing with a giant-locked driver like USB. Kris --PEIAKu/WMn1b1Hv9 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEeS7rWry0BWjoQKURAnhaAKDM5blYiuWvPgKdDOM19AUeEez3jACg1Bbx +HB6cjzZdAH5npYOa05OS5U= =0z4W -----END PGP SIGNATURE----- --PEIAKu/WMn1b1Hv9-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 05:21:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A6B0D16B509 for ; Sun, 28 May 2006 05:14:40 +0000 (UTC) (envelope-from youshi10@u.washington.edu) Received: from mxout1.cac.washington.edu (mxout1.cac.washington.edu [140.142.32.134]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4E03643D46 for ; Sun, 28 May 2006 05:14:40 +0000 (GMT) (envelope-from youshi10@u.washington.edu) Received: from smtp.washington.edu (smtp.washington.edu [140.142.33.9]) by mxout1.cac.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k4S5EdXa031670 for ; Sat, 27 May 2006 22:14:39 -0700 X-Auth-Received: from [192.168.0.50] (dsl254-013-145.sea1.dsl.speakeasy.net [216.254.13.145]) (authenticated authid=youshi10) by smtp.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k4S5EV17024644 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Sat, 27 May 2006 22:14:38 -0700 Message-ID: <447931BB.2090204@u.washington.edu> Date: Sat, 27 May 2006 22:14:35 -0700 From: Garrett Cooper User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <200605281423.51666.thats@notyourhomework.net> In-Reply-To: <200605281423.51666.thats@notyourhomework.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Uwash-Spam: Gauge=IIIIIII, Probability=7%, Report='__CT 0, __CTE 0, __CT_TEXT_PLAIN 0, __HAS_MSGID 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __SANE_MSGID 0, __USER_AGENT 0' Subject: Re: Configuring local network for Apache22 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 05:22:01 -0000 Malcolm Fitzgerald wrote: > I'm running a small network behind an ADSL router and one of the machines runs > freeBSD 6.0-SECURITY. I'd like to configure it to run apache22. Apache fails > to start and gives this error. > > [Sat May 27 18:49:28 2006] [alert] (EAI 8)hostname nor servname provided, or > not known: mod_unique_id: unable to find IPv4 address of "bsd-box." > > How do I configure Web searches suggest three possibilities > > 1. that this is a problem with DNS, edit /etc/hosts > > I've got this line in /etc/hosts > 127.0.0.1 localhost localhost.home.net bsd-box.home.net bsd-box > > 2. Apache is listening to devices that don't exist - I don't know how to > explore that suggestion. > > 3. If your host doesn't have a registered DNS name, enter its IP address in > httpd.conf > > I have this line in httpd.conf > ServerName 127.0.0.1 > Simplest means of correcting this would be to add your static IP (if one existed) for your server box on the network to your /etc/hosts file and then change Servname to match bsd-box. The more complex (but probably better means), would be to setup a DNS server (look up bind9 for this) and then just make sure that Servname matches your machine's DNS assigned hostname. -Garrett From owner-freebsd-questions@FreeBSD.ORG Sun May 28 06:21:14 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5973D16BC11 for ; Sun, 28 May 2006 06:19:22 +0000 (UTC) (envelope-from v.velox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id D6A8F43D4C for ; Sun, 28 May 2006 06:19:20 +0000 (GMT) (envelope-from v.velox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id 9F89414D9B2; Sat, 27 May 2006 23:19:19 -0700 (PDT) Date: Sun, 28 May 2006 01:19:51 -0500 From: Vulpes Velox To: Kyrre Nygard Message-ID: <20060528011951.33a12309@vixen42.vulpes> In-Reply-To: <7.0.1.0.2.20060527103258.022b7d70@broadpark.no> References: <7.0.1.0.2.20060527103258.022b7d70@broadpark.no> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Script to organize passwd and group X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 06:21:17 -0000 On Sat, 27 May 2006 11:10:18 +0200 Kyrre Nygard wrote: > > Hello! > > I was wondering if anybody out there share the same need as I do > to better organize /etc/passwd and /etc/group. > > I would like to see chronologic ordering of UIDs and GIDs, instead > of having them sorted by what ports their corresponding daemons run > on. > > Look below how much more flow it all gets. > > Then, if possible, it would be cool to make 3 distinct classes: > > 01 Necessities, with 1 to 2 digit IDs > > (maybe keep nobody seperate) > > 02 Servers, with 3 digit IDs > 03 Users, with 4 digit IDs > > I'm aware that when adding new users, one would manually have to > rearrange, but this is not because you shouldn't, it's because > adduser and pw doesn't yet support this kind of order. > > Here is my ideal setup: > > -- > > # cat /etc/.passwd > > root:*:0:0::0:0:Core:/root:/usr/local/bin/zsh > daemon:*:1:1::0:0:System Processes:/root:/usr/sbin/nologin > operator:*:2:2::0:0:Operator:/:/usr/sbin/nologin > kmem:*:3:65533::0:0:KMem:/:/usr/sbin/nologin > bin:*:4:4::0:0:Binaries:/:/usr/sbin/nologin > tty:*:5:65533::0:0:Titty:/:/usr/sbin/nologin > news:*:6:6::0:0:News:/:/usr/sbin/nologin > man:*:7:7::0:0:Manuals:/usr/share/man:/usr/sbin/nologin > > nobody:*:55555:55555::0:0:Unprivileged:/nonexistent:/usr/sbin/nologin > > sshd:*:101:101::0:0:Secure Shell:/var/empty:/usr/sbin/nologin > www:*:102:102::0:0:World Wide Web:/usr/local/www:/usr/sbin/nologin > ftp:*:103:103::0:0:File Transfer > Protocol:/home/websites:/usr/sbin/nologin > mysql:*:104:104::0:0:MySQL:/var/db/mysql:/sbin/nologin > proxy:*:105:105::0:0:Packet Filter:/nonexistent:/usr/sbin/nologin > smmsp:*:106:106::0:0:Sendmail > Submission:/var/spool/clientmqueue:/usr/sbin/nologin > mailnull:*:107:107::0:0:Sendmail > Default:/var/spool/mqueue:/usr/sbin/nologin > postfix:*:108:108::0:0:Postfix:/var/spool/postfix:/usr/sbin/nologin > cyrus:*:109:109::1111874400:0:Cyrus:/nonexistent:/usr/sbin/nologin > spamd:*:110:110::0:0:SpamAssassin:/var/spool/spamd:/sbin/nologin > vscan:*:111:111::0:0:Scanner:/var/amavis:/bin/sh > clamav:*:112:112::0:0:ClamAV:/nonexistent:/usr/sbin/nologin > > kyrre:*:1001:0::0:0:Kyrre:/home/kyrre:/usr/local/bin/zsh > nomad:*:1002:1002::0:0:Hednod:/home/nomad:/usr/local/bin/zsh > polvott:*:1003:1003::0:0:Thomas:/home/polvott:/usr/local/bin/zsh > nughaud:*:1004:1004::0:0:King:/home/nughaud:/usr/local/bin/zsh > > -- > > # cat /etc/group > > wheel:*:0:root > daemon:*:1: > operator:*:2:root > kmem:*:3: > bin:*:4: > tty:*:5: > news:*:6: > man:*:7: > > nobody:*:55555: > > sshd:*:101: > www:*:102: > ftp:*:103: > mysql:*:104: > proxy:*:105: > smmsp:*:106: > mailnull:*:107: > postfix:*:108: > cyrus:*:119: > spamd:*:110: > vscan:*:111: > clamav:*:112: > > nomad:*:1002: > polvott:*:1003: > nughaud:*:1004: > > -- > > The script would rearrange passwd and group into classes, based on a > predefined list maybe. Then it should renumber the UIDs and GIDs. For keeping stuff like this organized on a small system, I've all ways found keeping IDs with in certain ranges based on what they do to be useful. Like 1000 to 1999 is for users, 2000 to 2999 is for special non-login users, and etc. Or if you are using LDAP you can have something like this for a few OUs. ou=generalUsers,ou=userGroups,ou=usersANDgroups,dc=foo,dc=bar ou=services,ou=userGroups,ou=usersANDgroups,dc=foo,dc=bar ou=whatever,ou=userGroups,ou=usersANDgroups,dc=foo,dc=bar And then just set the nss and pam module to look for to look for users recursively under ou=userGroups,ou=usersANDgroups,dc=foo,dc=bar. I just throw them all under the same ou myself. > Then it should do something like: > > find -s / -uid foo | xargs chown bar > find -s / -gid foo | xargs chgrp bar Why not just rename the user/group foo to bar? That way name is changed and there is no need to change any thing on the file system because the IDs are the same. > And before you know it :) > > Your system will be looking tighter than ever! > > I hope somebody can help me with this. It will take me at least a > year, I've estimated, until I master Ruby well enough to do stuff > like this. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 07:21:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 648F616C9F9 for ; Sun, 28 May 2006 07:10:05 +0000 (UTC) (envelope-from dan@havoc.unixathome.org) Received: from havoc.unixathome.org (havoc.unixathome.org [66.154.98.130]) by mx1.FreeBSD.org (Postfix) with ESMTP id 199AC43D46 for ; Sun, 28 May 2006 07:10:05 +0000 (GMT) (envelope-from dan@havoc.unixathome.org) Received: from localhost (localhost [127.0.0.1]) by havoc.unixathome.org (Postfix) with ESMTP id C100F564C2 for ; Sun, 28 May 2006 00:10:04 -0700 (PDT) X-Virus-Scanned: by amavisd-new at unixathome.org Received: from havoc.unixathome.org ([127.0.0.1]) by localhost (havoc.unixathome.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id bgJYFUBpS7RZ for ; Sun, 28 May 2006 00:10:02 -0700 (PDT) Received: by havoc.unixathome.org (Postfix, from userid 1001) id 8EA5756476; Sun, 28 May 2006 00:10:02 -0700 (PDT) From: Dan Langille To: freebsd-questions@freebsd.org Message-Id: <20060528071002.8EA5756476@havoc.unixathome.org> Date: Sun, 28 May 2006 00:10:02 -0700 (PDT) Subject: The FreeBSD Diary: 2006-05-07 - 2006-05-27 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 07:21:57 -0000 The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives and/or The FreeBSD Diary . These are the articles posted during this period: 23-May : Burning CDs on an IDE CD-RW Accessing an IDE drive as if it was a SCSI device http://freebsddiary.org/cdrecord-ide.php?2 -- Dan Langille BSDCan - http://www.BSDCan.org/ - BSD Conference From owner-freebsd-questions@FreeBSD.ORG Sun May 28 08:17:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 56D6F16BEBB for ; Sun, 28 May 2006 08:02:13 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [81.187.76.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id A13BA43D46 for ; Sun, 28 May 2006 08:02:12 +0000 (GMT) (envelope-from m.seaman@infracaninophile.co.uk) Received: from [IPv6:::1] (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.13.6/8.13.6) with ESMTP id k4S82474010330; Sun, 28 May 2006 09:02:05 +0100 (BST) (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <447958F7.1020104@infracaninophile.co.uk> Date: Sun, 28 May 2006 09:01:59 +0100 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Yudai Yamagishi References: <001c01c681ff$38d1e080$0b0ba8c0@GATEWAY> In-Reply-To: <001c01c681ff$38d1e080$0b0ba8c0@GATEWAY> X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/signed; micalg=pgp-ripemd160; protocol="application/pgp-signature"; boundary="------------enig58B1961704ED22B370E96E0F" X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0.2 (smtp.infracaninophile.co.uk [IPv6:::1]); Sun, 28 May 2006 09:02:05 +0100 (BST) X-Virus-Scanned: ClamAV 0.88.2/1489/Sat May 27 14:47:18 2006 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,NO_RELAYS autolearn=ham version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on happy-idiot-talk.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: namebased VPS using JAIL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 08:17:38 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig58B1961704ED22B370E96E0F Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Yudai Yamagishi wrote: > Hey, >=20 > I'm trying to serve several VPS for my friends. >=20 > But, IP addresses costs too much here in Japan. >=20 > So, I only have 1 WAN IP. >=20 > I've heard that Virtuozzo let's users create namebased VPS. >=20 > For example, I want to create a VPS called vps1. >=20 > I'll assign vps1.codebusterz.net as VPS's address. >=20 > Then all network traffics for vps1.codebusterz.net will go to vps1. >=20 > Same with other VPSs by the way. >=20 > Is this possible using JAIL? >=20 > Thanks >=20 > Yudai Yamagishi This would only be possible if the protocols your users used to connect to your server included the name of the server they wanted to connect to in the data packets setting up the connection. That is the case in eg. HTTP/1.1 and it sort of applies to SMTP. However, those are pretty much the exceptions rather than the rule. Most network protocols just have the IP and port number of the service they want to connect to. So long as you can arrange for each instance of a given service to run on a distinct port number, you can use the standard NAT type function= s in pf(4) or ipfw(8)+natd(8) to hide a whole private network of servers behind a single IP number. You can also use this on a single server with jail(8) by binding the jailed IPs to the loopback interface, and using NAT on the external interface to rewrite the addresses on incoming traffic. NAT is generally used in the other direction though -- to let a private network access the Internet. If you can use protocols where the name of the server is included in the data payload, you will need to set up some sort of proxy server on your firewall to direct the traffic internally. Standard firewall stuff just looks at the packet headers (layer 2 or 3) and you need extra software to= do protocol (layer 4) dependent processing. It is a toss up as to whethe= r suitable software will be available for whatever services you wish to pro= vide. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW --------------enig58B1961704ED22B370E96E0F Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEeVj88Mjk52CukIwRA4VMAJ9LsJlAXXUurTrov/qWPm13uZlVYgCfWZo1 FsDs0p4U4WeOO7cLO106WLI= =Dbe0 -----END PGP SIGNATURE----- --------------enig58B1961704ED22B370E96E0F-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 08:25:25 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3F49416A5B1 for ; Sun, 28 May 2006 08:13:59 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (smtp.infracaninophile.co.uk [81.187.76.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 81D9143D46 for ; Sun, 28 May 2006 08:13:58 +0000 (GMT) (envelope-from m.seaman@infracaninophile.co.uk) Received: from [IPv6:::1] (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.13.6/8.13.6) with ESMTP id k4S8DrS7010355; Sun, 28 May 2006 09:13:54 +0100 (BST) (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <44795BBD.3060500@infracaninophile.co.uk> Date: Sun, 28 May 2006 09:13:49 +0100 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Ian Smith References: In-Reply-To: X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/signed; micalg=pgp-ripemd160; protocol="application/pgp-signature"; boundary="------------enig88214607345DD2A3A0591EFF" X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0.2 (smtp.infracaninophile.co.uk [IPv6:::1]); Sun, 28 May 2006 09:13:54 +0100 (BST) X-Virus-Scanned: ClamAV 0.88.2/1489/Sat May 27 14:47:18 2006 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,NO_RELAYS autolearn=ham version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on happy-idiot-talk.infracaninophile.co.uk Cc: questions@freebsd.org Subject: Re: phpMyAdmin problem - no Edit/Delete on Browse X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 08:25:38 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig88214607345DD2A3A0591EFF Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Ian Smith wrote: > (originally posted to -database some days ago .. no nibbles) >=20 > running 5.4-RELEASE and installed phpMyAdmin 2.6.1.3 with pkg_add -r > (after finding installing from ports wanted to also fetch php4 sources > and heaps of other stuff I already had installed from packages on the > 2-CD set). I'd managed to find and install 5.4-R mysql packages also: >=20 > smithi on paqi% pkg_info | grep -i "php\|mysql" > libmcrypt-2.5.7_1 Multi-cipher cryptographic library (used in PHP) > mysql-client-4.1.10a Multithreaded SQL database (client) > mysql-server-4.1.10a Multithreaded SQL database (server) > php4-4.3.10_2 PHP Scripting Language (Apache Module and CLI) > php4-bz2-4.3.10_2 The bz2 shared extension for php > php4-gd-4.3.10_2 The gd shared extension for php > php4-mbstring-4.3.10_2 The mbstring shared extension for php > php4-mcrypt-4.3.10_2 The mcrypt shared extension for php > php4-mysql-4.3.10_2 The mysql shared extension for php > php4-openssl-4.3.10_2 The openssl shared extension for php > php4-pcre-4.3.10_2 The pcre shared extension for php > php4-zlib-4.3.10_2 The zlib shared extension for php > phpMyAdmin-2.6.1.3 A set of PHP-scripts to manage MySQL over the web >=20 > phpmyadmin basically works fine. I'd imported my databases from dumps,= > and all looked good after a bit of configuration. However when startin= g > to do some real work on a couple of databases, I noticed that while > browsing any database, the Edit and Delete options do not appear with > each row, ie I can not update existing records (even as -u root) >=20 > I'd suspected permissions, but I can insert new records, add/drop/empty= > tables and databases, bookmark queries and all. The permissions and > ownership of and in /var/db/mysql are the same as my old 4.5-R system. >=20 > $cfg['ModifyDeleteAtLeft'] =3D TRUE; I've also tried adding ...AtRight = as > well, but neither show up. If relevant, I'm using apache-1.3.33_1 and = > mozilla-1.7.7,2 .. all of this is just running on the local machine, so= > I'm not at the moment concerned with just security-issue updates. >=20 > I haven't been able to find anything in later version change notes or > PRs indicating anything like this problem, and updating to the current > port would require updating php, mysql, expat and even xorg versions, > which is just not doable over a 28.8k modem connection I'm afraid, so > the 'usual' answer of cvsuping and updating everything is not helpful; > in any case I suspect this is more likely a maybe subtle config issue? What is the UID *within* MySQL you are using to connect with? Does running: SHOW GRANTS FOR `user`@`hostname` ; make things any clearer? phpMyAdmin is clever enough to modify its user interface according to wha= t the user has permission to do to the database. The user name use within = the database depends on how you've configured phpMyAdmin -- I generally like = to use 'cookie' mode authentication where the username and password are pass= ed straight through to MySQL from the login dialog, but the 'config' mode gi= ven in the example config files requires you to put the username and password= directly in the phpMyAdmin configuration file.=20 Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW --------------enig88214607345DD2A3A0591EFF Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEeVvB8Mjk52CukIwRA+uRAKCCBgWJ8FFMfZTXLhYQSM/2IstyGQCfXuPp TOnvNV/Dq2fGjG923AqaPYc= =+q3N -----END PGP SIGNATURE----- --------------enig88214607345DD2A3A0591EFF-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 09:23:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ECC6416CA5C for ; Sun, 28 May 2006 08:53:38 +0000 (UTC) (envelope-from ijeff@sandbox.ca) Received: from sandbox.ca (zaphod.sandbox.ca [199.246.50.125]) by mx1.FreeBSD.org (Postfix) with ESMTP id 618C743D46 for ; Sun, 28 May 2006 08:53:38 +0000 (GMT) (envelope-from ijeff@sandbox.ca) Received: from [127.0.0.1] (sandbox.ca [199.246.50.125]) by sandbox.ca (8.12.6/8.12.6) with ESMTP id k4S8rXx1092008; Sun, 28 May 2006 04:53:34 -0400 (EDT) (envelope-from ijeff@sandbox.ca) In-Reply-To: <0E6E4139-E567-4A85-BDA6-7D73FE0668F6@shire.net> References: <1147255200.4461b9a0a5e71@196.22.132.16> <44621529.7050804@netfence.it> <20060511104517.GA11619@storage.mine.nu> <1147344670.4463171eb5364@196.22.132.16> <0E6E4139-E567-4A85-BDA6-7D73FE0668F6@shire.net> Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Ian Jefferson Date: Sun, 28 May 2006 17:53:31 +0900 To: "Chad Leigh -- Shire.Net LLC" X-Mailer: Apple Mail (2.750) X-Spam-Status: No, score=-3.8 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.0-igj_main_2005_08_07 X-Spam-Checker-Version: SpamAssassin 3.1.0-igj_main_2005_08_07 (2005-09-13) on zaphod.sandbox.ca Cc: FreeBSD Questions Mailing List Subject: Re: OT: Torn between SCSI and SATA for RAID X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 09:23:28 -0000 > > > I'd rather run 5 SATA cables then one SCSI cable (say 68pin) with > multiple heads... The darn SCSI cables are so thick, > comparatively, that running them in your case is a lot harder :-) > > Well everyone's mileage may vary. Parallel cables only work nicely when you have a stack of drives all close & lined up together. I personally yearn for a simple 40gbps daisychainable serial bus. I hoped firewire would have been it but we seem to be stuck at 800mpbs. The other cabling option I forgot about is USB2 or Firewire. There are a number of very low cost external cases that pre-package USB/Firewire SATA converters. You basically fill a hard disk case with SATA or ATA drives and connect your computer to the case via a single firewire or USB cable. I have not seen one of these that's hot swap yet but I did see a few of these recently in Tokyo Akihabara district for ~$100 so I assume they are available all over. The box's I have seen are 4 drive systems. Just fill them with your favorite commodity hard disk I guess. At ~50MB/s the interface is plenty fast and greatly simplifies the cable issue inside the PC. IJ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 10:30:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2660516BFB3 for ; Sun, 28 May 2006 10:21:12 +0000 (UTC) (envelope-from miks@cube-media.lv) Received: from mail.skynet.lv (fire.skynet.lv [195.244.128.20]) by mx1.FreeBSD.org (Postfix) with SMTP id C678443D48 for ; Sun, 28 May 2006 10:21:10 +0000 (GMT) (envelope-from miks@cube-media.lv) Received: (qmail 88623 invoked by uid 1020); 28 May 2006 10:21:07 -0000 Received: from 81.198.173.200 by fire.skynet.lv (envelope-from , uid 1018) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/898. spamassassin: 3.1.0. perlscan: 1.25-st-qms. Clear:RC:0(81.198.173.200):SA:0(-1.9/5.0):. Processed in 3.869408 secs); 28 May 2006 10:21:07 -0000 X-Spam-Status: No, hits=-1.9 required=5.0 X-Antivirus-SKYNET-Mail-From: miks@cube-media.lv via fire.skynet.lv X-Antivirus-SKYNET: 1.25-st-qms (Clear:RC:0(81.198.173.200):SA:0(-1.9/5.0):. Processed in 3.869408 secs Process 88610) Received: from unknown (HELO ?192.168.1.164?) (miks@cube-media.lv@81.198.173.200) by mail.skynet.lv with SMTP; 28 May 2006 10:21:03 -0000 Message-ID: <44797982.2070201@cube-media.lv> Date: Sun, 28 May 2006 13:20:50 +0300 From: =?UTF-8?B?TWlrcyBNacS3ZWxzb25z?= User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: asrock 939 sata controller problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 10:30:42 -0000 hello, i have Asrock 939 motherboard with freebsd 6.0. i got only "atapci0: " and " [root@sun /home/d-str]# atacontrol mode ad4 current mode = UDMA33 " disk performance is very low. my dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Sun May 28 11:12:59 EEST 2006 root@sun:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff Features2=0x1 AMD Features=0xe2500800,LM,3DNow+,3DNow> Hyperthreading: 2 logical CPUs real memory = 1006305280 (959 MB) avail memory = 960126976 (915 MB) ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi0: Power Button (fixed) pci_link0: irq 0 on acpi0 pci_link1: irq 0 on acpi0 pci_link2: irq 15 on acpi0 pci_link3: irq 0 on acpi0 pci_link4: irq 0 on acpi0 pci_link5: irq 0 on acpi0 pci_link6: irq 11 on acpi0 pci_link7: irq 0 on acpi0 pci_link8: irq 14 on acpi0 pci_link9: irq 0 on acpi0 pci_link10: irq 7 on acpi0 pci_link11: irq 0 on acpi0 pci_link12: irq 0 on acpi0 pci_link13: irq 0 on acpi0 pci_link14: irq 15 on acpi0 pci_link15: irq 5 on acpi0 pci_link16: irq 10 on acpi0 pci_link17: irq 0 on acpi0 pci_link18: irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci_link6: BIOS IRQ 11 for -2145774616.5.INTA is invalid pci_link14: BIOS IRQ 15 for -2145774616.10.INTA is invalid pci_link10: BIOS IRQ 7 for -2145774616.20.INTA is invalid pci_link16: BIOS IRQ 10 for -2145774616.14.INTA is invalid pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: at device 3.0 on pci0 pci2: on pcib2 pcib3: at device 4.0 on pci0 pci3: on pcib3 pci0: at device 5.0 (no driver attached) pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) atapci0: port 0xf80-0xf87,0xf00-0xf03,0xe80-0xe87,0xe00-0xe03,0xe000-0xe00f mem 0xfebde000-0xfebdefff irq 21 at device 14.0 on pci0 ata2: on atapci0 ata3: on atapci0 pcib4: at device 16.0 on pci0 pci4: on pcib4 fxp0: port 0xcc00-0xcc3f mem 0xfaaff000-0xfaafffff,0xfaac0000-0xfaadffff irq 17 at device 10.0 on pci4 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:0e:0c:7f:ff:33 pci0: at device 20.0 (no driver attached) acpi_button0: on acpi0 atkbdc0: at port 0x60,0x64 on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2009158218 Hz quality 800 Timecounters tick every 1.000 msec ad4: 286188MB at ata2-master UDMA33 ad6: 286188MB at ata3-master UDMA33 ar0: 286188MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master Trying to mount root from ufs:/dev/ar0s1a From owner-freebsd-questions@FreeBSD.ORG Sun May 28 10:40:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7AED116B001 for ; Sun, 28 May 2006 10:38:07 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.198]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0862743D4C for ; Sun, 28 May 2006 10:38:06 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so352858nzf for ; Sun, 28 May 2006 03:38:06 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=jBGCW+5LAK+LV6IeyDTNrKHsJkqNKEXvz5kDcct0Gxy/0PyUGai1aRu3vz4cOb9MzbeYKjEWlLF8w+Cyd0plv7z0d7Ug3Zd18HeZjq2MZgx1ebYlbG4xHShytMItJLBX9tM73pYSNW81muhVXeKZSIEC9sCSaPMLdi4l7S6eTGc= Received: by 10.36.20.8 with SMTP id 8mr1657040nzt; Sun, 28 May 2006 03:38:06 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 03:38:06 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 05:38:06 -0500 From: "Nikolas Britton" To: "william wallace" In-Reply-To: <87ab37ab0605272028o54e0a2c9x65cc69ffc6c0e3af@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <87ab37ab0605272028o54e0a2c9x65cc69ffc6c0e3af@mail.gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: what is the use of drm_os_freebsd.h X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 10:40:48 -0000 On 5/27/06, william wallace wrote: > hi ,all > I am porting something from linux to freebsd ,i found the > DataTypes hard to translate ,then i saw that many types inlinux can be > found in drm_os_freebsd.h,such as > typedef int8_t s8; > typedef int16_t s16; > typedef int32_t s32; > typedef u_int8_t u8; > typedef u_int16_t u16; > typedef u_int32_t u32; > > so ,what is the use of drm_os_freebsd.h > and any advice for me to translate DT from linux to Freebsd? > "The Direct Rendering Manager (DRM) is a device-independent kernel-level device driver that provides support for the XFree86 Direct Rendering Infrastructure (DRI)." --src/sys/dev/drm/drm.h I can't find the file your talking about so this is just a guess. --=20 BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 11:40:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7024716A445 for ; Sun, 28 May 2006 11:40:09 +0000 (UTC) (envelope-from menwn@yahoo.co.uk) Received: from smtp006.mail.ukl.yahoo.com (smtp006.mail.ukl.yahoo.com [217.12.11.95]) by mx1.FreeBSD.org (Postfix) with SMTP id 9F59743D48 for ; Sun, 28 May 2006 11:40:08 +0000 (GMT) (envelope-from menwn@yahoo.co.uk) Received: (qmail 10328 invoked from network); 28 May 2006 11:40:07 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Received:From:Organization:To:Subject:Date:User-Agent:MIME-Version:Content-Disposition:Message-Id:Content-Type:Content-Transfer-Encoding; b=ZWQrqKSoDbGhRVczQ05PE2xEgNI8Kvha30pN//jqJ5NHf5k9CeP5SJLjoWLViKM/X7d4myAFmRBFsgM0QnK00yIoTk0F5voHAgIY8oexrt6sXgIKoiR34vRDrGbBynsMp7k03w3SOtUWYvKCpnd1yViTc4FNGK7dMGrWDG6XvbI= ; Received: from unknown (HELO ?192.168.1.65?) (menwn@195.74.240.124 with login) by smtp006.mail.ukl.yahoo.com with SMTP; 28 May 2006 11:40:07 -0000 From: andreas Sotirakopoulos Organization: GP To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 14:39:40 +0300 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200605281439.40203.menwn@yahoo.co.uk> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Subject: Wireless internet connetction issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 11:40:10 -0000 Hi I have(?) an internet connetction issue... I have a router connected to a=20 windows box downstaires (Lynksis wAG354G) and i use a wirelless usb adapter= =20 (Lynksis WUSB54G). It works fine under windows and even if some times the=20 signal is lost usually it comes back by either moving the antenna a little = or=20 by restarting the network configuration tool. In FreeBSD the adapter is=20 visible and uses ural0 driver. So if give the command=20 ifconfig ural0 inet 192.168.1.65 netmask 255.255.255.0 but i cannot connect= to=20 the internet or "see" the windows box.=20 Now comes the strange part. if i press ifconfig ural0 i get: ural0: flags=3D108843 mt= u=20 1500 =A0 =A0 =A0 =A0 inet6 fe80::212:17ff:fe81:881a%ural0 prefixlen 64 scopeid 0= x1 =A0 =A0 =A0 =A0 ether 00:12:17:81:88:1a =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbp= s) =A0 =A0 =A0 =A0 status: associated =A0 =A0 =A0 =A0 ssid linksys channel 11 bssid 00:14:bf:cb:71:32 =A0 =A0 =A0 =A0 authmode OPEN privacy OFF txpowmax 100 protmode CTS bintval= 100 but still i cannot connect to web pages or ping hosts. =A0I use KDE 3.5 and= i do=20 the following:=20 from the Kmenu ->settings->internet and Network-> Network settings and on t= he=20 card Network interfaces i see that there is only onde availiable interface= =20 fxp0 dhcp Disabled Ethernet Network Device. I know that this is my ethernet= =20 onboard card but if i choose Enable Interface i can connect to the=20 internet!!!!!! I assume that something runs in the background that enables = as=20 well my wireless card but what is this? So what's the problem you may ask... the problem is that in case that my=20 connection is lost i cannot do anything to get it back up.=20 i =A0have tried dhclient ural0 and nothing happents same with ifconfig ural= 0=20 up... I have to reboot and do the procudure again and the problem is that it fail= s=20 often if i leave the net for a while...=20 Any ideas? thanks ___________________________________________________________ To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sun May 28 11:40:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 872D716A82E for ; Sun, 28 May 2006 11:40:27 +0000 (UTC) (envelope-from fierykylin@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id D8B9543D48 for ; Sun, 28 May 2006 11:40:26 +0000 (GMT) (envelope-from fierykylin@gmail.com) Received: by wx-out-0102.google.com with SMTP id i31so23278wxd for ; Sun, 28 May 2006 04:40:26 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; b=aHUC5zhDOiigugdTFfe7u3wVl0vuL+fhn/Qtuu/i8narZ7VVdzDKy6LfUiZ9ubHf/+UT2pWsAOOjUPXRYUZvwOt/dPngtdZ3aGD4qwoJcLcDjDf1YcUPFP6UU+WAv2Rg+sAR5+dCI8ndGWidcF/DyD90UP1Du/req6Ka8TDP2v4= Received: by 10.70.105.15 with SMTP id d15mr1258431wxc; Sun, 28 May 2006 04:40:26 -0700 (PDT) Received: by 10.70.43.11 with HTTP; Sun, 28 May 2006 04:40:26 -0700 (PDT) Message-ID: <87ab37ab0605280440t4b40f716xa78d47b7983e52ad@mail.gmail.com> Date: Sun, 28 May 2006 19:40:26 +0800 From: "william wallace" Sender: fierykylin@gmail.com To: "Nikolas Britton" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-2022-JP; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <87ab37ab0605272028o54e0a2c9x65cc69ffc6c0e3af@mail.gmail.com> X-Google-Sender-Auth: 13bfd6f986ec9bcd Cc: freebsd-questions@freebsd.org Subject: Re: what is the use of drm_os_freebsd.h X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 11:40:28 -0000 thanku sir$B!*(B but why there r so many datat type similar to linux in that group of files? On 5/28/06, Nikolas Britton wrote: > On 5/27/06, william wallace wrote: > > hi ,all > > I am porting something from linux to freebsd ,i found the > > DataTypes hard to translate ,then i saw that many types inlinux can be > > found in drm_os_freebsd.h,such as > > typedef int8_t s8; > > typedef int16_t s16; > > typedef int32_t s32; > > typedef u_int8_t u8; > > typedef u_int16_t u16; > > typedef u_int32_t u32; > > > > so ,what is the use of drm_os_freebsd.h > > and any advice for me to translate DT from linux to Freebsd? > > > > "The Direct Rendering Manager (DRM) is a device-independent > kernel-level device driver that provides support for the XFree86 > Direct Rendering Infrastructure (DRI)." --src/sys/dev/drm/drm.h > > I can't find the file your talking about so this is just a guess. > > > > -- > BSD Podcasts @: > http://bsdtalk.blogspot.com/ > http://freebsdforall.blogspot.com/ > -- we who r about to die,salute u! From owner-freebsd-questions@FreeBSD.ORG Sun May 28 12:17:42 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8215416AB5F for ; Sun, 28 May 2006 12:17:42 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1084143D4C for ; Sun, 28 May 2006 12:17:41 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 6157 invoked from network); 28 May 2006 22:17:40 +1000 Received: from 203-217-63-189.dyn.iinet.net.au (HELO localhost) (203.217.63.189) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 28 May 2006 22:17:40 +1000 Date: Sun, 28 May 2006 22:17:36 +1000 From: Norberto Meijome To: "Marc G. Fournier" Message-ID: <20060528221736.56489f7e@localhost> In-Reply-To: <20060527204339.R1114@ganymede.hub.org> References: <20060524004530.37df6b39@localhost> <20060527204339.R1114@ganymede.hub.org> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: diablo-jdk vs jdk1.5 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 12:17:54 -0000 On Sat, 27 May 2006 20:44:51 -0300 (ADT) "Marc G. Fournier" wrote: > On Wed, 24 May 2006, Norberto Meijome wrote: > > > Hi all, > > 2 questions re. JDK 1.5 : > > - is .15 considered now stable? ( I remember reading that it was still > > considered alpha quality, but i cant see that notice anymore). > > > > - re. diablo-jdk : Other than the obvious advange of precompiled package > > (already done for me, SUN certified) , is there other advantage to using > > diablo-jdk instead of building my own? > > And, in the same vein, any caveats I should keep in mind when using > > diablo-jdk instead of jdk-1.5? > > My understanding is that the precompiled package performs better then the > one you build from ports, *but* ... I don't know why ... > > On my 6-STABLE machine, to get Azureus to work properly, I had to add the > following to /etc/libmap.conf: > > [/usr/local/diablo-jdk1.5.0/] > libpthread.so libc_r.so > libpthread.so.2 libc_r.so.6 > > else it just didn't work ... > > Beyond that, I've been using the precompiled one and been most happy with > it ... thanks - i've been using for a few days diablo-jdk with no problems this far. I reinstalled all my java programs after changing from jdk-1.4 to diablo-jdk-1.5... i dont remember having to change libmap for azureus... but I have added : ## diablo-jdk libz.so.2 libz.so.3 libpthread.so.1 libpthread.so libc.so.5 libc.so.6 libm.so.3 libm.so libstdc++.so.4 libstdc++.so I think it may have been for 'java' From owner-freebsd-questions@FreeBSD.ORG Sun May 28 12:27:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 13A8916A4C7 for ; Sun, 28 May 2006 12:27:15 +0000 (UTC) (envelope-from shawnh@f2s.com) Received: from outmail.freedom2surf.net (outmail1.freedom2surf.net [194.106.33.237]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7FACF43D46 for ; Sun, 28 May 2006 12:27:13 +0000 (GMT) (envelope-from shawnh@f2s.com) Received: from freeBSD (i-83-67-13-3.freedom2surf.net [83.67.13.3]) by outmail.freedom2surf.net (Postfix) with ESMTP id 6A90239813D for ; Sun, 28 May 2006 13:27:12 +0100 (BST) Date: Sun, 28 May 2006 13:28:05 +0100 From: Shawn To: freebsd-questions@freebsd.org Message-ID: <20060528132805.475e8850@freeBSD> In-Reply-To: <20060528050235.GA19706@xor.obsecurity.org> References: <20060527011413.738aecd3@freeBSD> <20060528001836.GA42222@ibm.maison> <20060528050235.GA19706@xor.obsecurity.org> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Strange pauses and cpu usage - FreeBSD 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 12:27:20 -0000 On Sun, 28 May 2006 01:02:35 -0400 Kris Kennaway wrote: > On Sun, May 28, 2006 at 02:18:36AM +0200, Xavier Chantry wrote: > > On Sat, May 27, 2006 at 01:14:13AM +0100, Shawn wrote: > > > I'm having a strange problem with cpu usage with my Athlon XP. > > > Every so often there seems to be a pause where the system comes > > > under heavy load for no apparent reason. If xmms was playing then > > > I get a buzz sound and the mouse pointer stops just for a split > > > second, the same with mplayer and vlc. Using Opera or firefox > > > also seems to have a strange effect where the mouse pointer > > > freezes while pages load, and if there is an animated gif on the > > > page the cpu usage goes to 100%. > > > > > > The jabber client Gajim also makes the cpu get stuck at 100%. > > > When I used gnome, nautilus did the same thing until i stopped > > > and started the process in the system monitor. I have searched > > > around and found this tip from the handbook but it had no effect. > > > > > > hint.apic.0.disabled="1" in /boot/loader.conf > > > > > > This happens with the generic kernel and the one i compiled for > > > myself. It also lasts for a random amount of time, sometimes it > > > is barely noticeable and sometimes it happens for over a second. > > > Running neverwinter nights makes the system pause for 10-20 > > > seconds seemingly randomly. > > > > > > > My system behaves much better than that, I've no mouse freeze and no > > system pauses, but I did have occasonial sound skips using 4bsd on > > 6.1. Switching to the ULE scheduler seems to fix this problem, but > > other things may behave worse. > > One year ago, it was actually the opposite, sound in ULE was really > > jerky, and mouse pointer too while eg launching an app. > > Did you already try both schedulers ? > > Check for interrupt sharing with vmstat -i. Shared interrupts cause > performance loss especially if it's sharing with a giant-locked driver > like USB. > > Kris I tried switching to ULE and while the sound skipping seems to have stopped, the other problems remain. vmstat -i gives me: interrupt total rate irq0: clk 69873 984 irq7: ppc0 2 0 irq8: rtc 8944 125 irq10: atapci0++ 2409 33 irq11: nvidia0++ 5264 74 irq12: pcm0 rl0+ 41 0 irq15: ata1 47 0 Total 86580 1219 So it seems that net and sound are sharing irq12, and just before i see the freeBSD bootloader i can see that irq12 is used for the usb controller. Is this my problem? I have no irq settings in the BIOS and i tried a device hint for pcm to move it up to irq13 but had no luck. Forgive me if I am missing something obvious somewhere along the line, I only started using freeBSD a few weeks ago and I am totally new to BSD in general. Thanks for the help! ~shawn From owner-freebsd-questions@FreeBSD.ORG Sun May 28 12:46:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F016616AFE2 for ; Sun, 28 May 2006 12:46:23 +0000 (UTC) (envelope-from gpeel@thenetnow.com) Received: from webmaillogin.com (fr6.webmaillogin.com [216.40.35.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 51D7343D46 for ; Sun, 28 May 2006 12:46:22 +0000 (GMT) (envelope-from gpeel@thenetnow.com) Received: from [216.240.12.2] (account gpeel@thenetnow.com HELO grant) by fr6.webmaillogin.com (CommuniGate Pro SMTP 5.0.9) with ESMTPA id 38553774 for freebsd-questions@freebsd.org; Sun, 28 May 2006 08:46:21 -0400 Message-ID: <00d601c68254$b814c330$6501a8c0@grant> From: "Grant Peel" To: Date: Sun, 28 May 2006 08:46:13 -0400 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Subject: 2>&1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 12:46:28 -0000 Hi all, When using cron, I understand the >/dev/null thing OK, but what exactly does >2&1 do? Is it usefull anywhere else? Where might one find ducumentation on it? -Grant From owner-freebsd-questions@FreeBSD.ORG Sun May 28 12:53:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 920DA16BC0A for ; Sun, 28 May 2006 12:53:15 +0000 (UTC) (envelope-from xfb52@dial.pipex.com) Received: from smtp-out3.blueyonder.co.uk (smtp-out3.blueyonder.co.uk [195.188.213.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 16A0643D55 for ; Sun, 28 May 2006 12:53:14 +0000 (GMT) (envelope-from xfb52@dial.pipex.com) Received: from [172.23.170.144] (helo=anti-virus03-07) by smtp-out3.blueyonder.co.uk with smtp (Exim 4.52) id 1FkKlc-0000GZ-Lf; Sun, 28 May 2006 13:53:12 +0100 Received: from [82.41.33.243] (helo=[192.168.0.2]) by asmtp-out4.blueyonder.co.uk with esmtp (Exim 4.52) id 1FkKlN-0002aZ-H6; Sun, 28 May 2006 13:52:57 +0100 Message-ID: <44799D29.1080505@dial.pipex.com> Date: Sun, 28 May 2006 13:52:57 +0100 From: Alex Zbyslaw User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-GB; rv:1.7.13) Gecko/20060515 X-Accept-Language: en MIME-Version: 1.0 To: Grant Peel References: <00d601c68254$b814c330$6501a8c0@grant> In-Reply-To: <00d601c68254$b814c330$6501a8c0@grant> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: 2>&1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 12:53:18 -0000 Grant Peel wrote: > Hi all, > > When using cron, I understand the >/dev/null thing OK, but what > exactly does >2&1 do? Is it usefull anywhere else? Where might one > find ducumentation on it? > It redirects error output (aka standard error, stderr) to the same place as standard output (aka stout), in this case, the bit bucket. man sh, or any basic Unix book worth it's salt. --Alex From owner-freebsd-questions@FreeBSD.ORG Sun May 28 12:53:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EEC0416A55C for ; Sun, 28 May 2006 12:53:28 +0000 (UTC) (envelope-from gabor.kovesdan@t-hosting.hu) Received: from server.t-hosting.hu (server.t-hosting.hu [217.20.133.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 692B443D46 for ; Sun, 28 May 2006 12:53:26 +0000 (GMT) (envelope-from gabor.kovesdan@t-hosting.hu) Received: from localhost (localhost [127.0.0.1]) by server.t-hosting.hu (Postfix) with ESMTP id 71DFF99938D; Sun, 28 May 2006 14:53:22 +0200 (CEST) X-Virus-Scanned: amavisd-new at example.com Received: from server.t-hosting.hu ([127.0.0.1]) by localhost (server.t-hosting.hu [127.0.0.1]) (amavisd-new, port 10024) with LMTP id ol9gBPiCX-mj; Sun, 28 May 2006 14:53:14 +0200 (CEST) Received: from [192.168.2.186] (catv-50635cb6.catv.broadband.hu [80.99.92.182]) by server.t-hosting.hu (Postfix) with ESMTP id 2A670999319; Sun, 28 May 2006 14:53:14 +0200 (CEST) Message-ID: <44799D31.6090400@t-hosting.hu> Date: Sun, 28 May 2006 14:53:05 +0200 From: =?ISO-8859-1?Q?K=F6vesd=E1n_G=E1bor?= User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Grant Peel References: <00d601c68254$b814c330$6501a8c0@grant> In-Reply-To: <00d601c68254$b814c330$6501a8c0@grant> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: 2>&1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 12:53:31 -0000 Grant Peel wrote: > Hi all, > > When using cron, I understand the >/dev/null thing OK, but what > exactly does >2&1 do? Is it usefull anywhere else? Where might one > find ducumentation on it? > > -Grant > The standard stream stdout has the assigned number 1, and the stderr has number 2. The >/dev/null redirects stdout to /dev/null and 2>&1 means redirecting stderr to stdout, so it goes to /dev/null as well. Gabor Kovesdan From owner-freebsd-questions@FreeBSD.ORG Sun May 28 13:08:46 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 87E8C16AD94 for ; Sun, 28 May 2006 13:08:46 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.173]) by mx1.FreeBSD.org (Postfix) with ESMTP id E5AE243D48 for ; Sun, 28 May 2006 13:08:45 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so81281uge for ; Sun, 28 May 2006 06:08:44 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=WUhezY0W8iR3HrT3NHOHmlkCOG0m0zhSDRJsadWFZAMhAfM8Ohimn/XQZSqI1UinVW+uyyxvK43M5AiyZZwpwXWCbrLyr1RJb4diyOMw/WzK+pPKjgvacoWgWN+Fb/OOC5JStmEnKDRatOxizUymV1Io9wciwlZSvSGWmKobsmQ= Received: by 10.78.42.7 with SMTP id p7mr183687hup; Sun, 28 May 2006 06:08:44 -0700 (PDT) Received: by 10.78.16.15 with HTTP; Sun, 28 May 2006 06:08:44 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 15:08:44 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Problem with BCM4306 driver X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 13:08:48 -0000 I have a HP nx6110 laptop, and decided to install FreeBSD 6.1. Quite frankly I am surprised by the power and fine design this system has. This is definitely a better server than linux. I am a complete newbie in BSD, so please excuse me if my question sounds very stupid. I am trying to make my integrated wireless card Broadcom 4306 work. Since there are no native drivers I adopted the ndis approach. Howevet there seem to be two ways to do this, one is using ndiscvt and the other with ndisgen. I tried both but none worked: 1. USING ndiscvt I copied the driver to /sys/modules/if_ndis, and then: # ndiscvt -i BCMWL5A.INF -s BCMWL5.SYS -o ndis_driver_data.h # make && make install # kldload ndis && kldload if_ndis However I am not seeing the interface when run ifconfig. It behaves as if nothig is there. I also tried to recompile ndis & if_ndis from their sources in /usr/src/sys/modules but nothing worked. The adapter simple does not appear. However when I run pciconf -lv I see the pci card. 2. USING ndisgen I copied the drivers to the same folder and run ndisgen BCMWL5.INF BCMWL5.SYS. Everything goes ok but I get an error in the last step when I try to compile it. Then I tried to redirect the output if ndisgen to a pipe and it miracolously generated a file BCMWL5_SYS. This I copied to /boot/kernel and loaded ndis, if_ndis, BCMWL5_SYS. However again the adapter does not appear in ifconfig. I cannot see what is going wrong, because I just followed some HOWTOs that appear in the FreeBSD Handbook (of ndiscvt) and some other forum (about ndisgen). Any help would be greatly appreciated. Atanas From owner-freebsd-questions@FreeBSD.ORG Sun May 28 13:12:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DE14D16C0E7 for ; Sun, 28 May 2006 13:12:34 +0000 (UTC) (envelope-from beech@alaskaparadise.com) Received: from stargate.alaskaparadise.com (114-103-74-65.gci.net [65.74.103.114]) by mx1.FreeBSD.org (Postfix) with ESMTP id 080D043D53 for ; Sun, 28 May 2006 13:12:29 +0000 (GMT) (envelope-from beech@alaskaparadise.com) Received: by stargate.alaskaparadise.com (Postfix, from userid 0) id 6E73D405F; Sun, 28 May 2006 05:12:11 -0800 (AKDT) From: Beech Rintoul Organization: Alaska Paradise To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 05:11:55 -0800 User-Agent: KMail/1.9.1 References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <200605270046.04333.beech@alaskaparadise.com> <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> In-Reply-To: <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart3173723.at1CfiNgK6"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605280512.09645.beech@alaskaparadise.com> Cc: Kyrre Nygard Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 13:12:35 -0000 --nextPart3173723.at1CfiNgK6 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Saturday 27 May 2006 01:12, Kyrre Nygard wrote: > At 10:45 27.05.2006, Beech Rintoul wrote: > >On Saturday 27 May 2006 00:32, Kyrre Nygard wrote: > > > Hello! > > > > > > I have a team of designers working on web 2.0 like sites. > > > > > > I have added them all to this box, now I'm wondering what's the most > > > convenient way of giving them all access to /usr/local/www? > > > > > > My temporary solution has been to add all users with UID and GID 80, > > > and then ln -s /usr/local/www ~/collabo for each user. > > > > > > If users have their original UID instead of www's then somehow they > > > can't read or write to /usr/local/www. I thought sharing the same GID > > > was sufficient, but obviously it isn't. I find this very strange. > > > > > > Some of them prefer just using FTP, so then being able to click on > > > collabo@ and go straight to /usr/local/www is very convenient for the= m. > > > > > > But is there a better way? > > > > > > Thanks, > > > Kyrre > > > >CVS is your friend. But there are also a ton of php scripts out there to > > do what you want. > > > >Beech > >-- > > Yeah I hear a lot of people like CVS. > > But I fail to realize how it might assist me though. > > I'm not setting up a code repository, this is an actual WWW root > where a lot of different websites are hosted. > > Please correct me if I'm wrong. > > And what PHP scripts are you talking about? > > Thanks a lot, > Kyrre > Take a look at http://www.hotscripts.com there is a lot of stuff in there f= or=20 dealing with multiple users (some commercial, some not). Ultimately if you'= re=20 doing that level of hosting you'll probably want something like cpanel, but= =20 cpanel itself is very pricey.=20 Beech =2D-=20 =2D------------------------------------------------------------------------= =2D------------- Beech Rintoul - Sys. Administrator - beech@alaskaparadise.com /"\ ASCII Ribbon Campaign | Alaska Paradise \ / - NO HTML/RTF in e-mail | 201 East 9Th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ - Please visit Alaska Paradise - http://www.alaskaparadise.com =2D------------------------------------------------------------------------= =2D------------- --nextPart3173723.at1CfiNgK6 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEeaGpp5D0B1NlT4URAh64AKCHcP5aSx2N9oMAdp7sUJy/zko7IgCcDz61 e7/87JxFhzykKdtTdY55YGQ= =GawE -----END PGP SIGNATURE----- --nextPart3173723.at1CfiNgK6-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 13:14:54 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6D00516C087 for ; Sun, 28 May 2006 13:14:54 +0000 (UTC) (envelope-from mj001@rogers.com) Received: from smtp104.rog.mail.re2.yahoo.com (smtp104.rog.mail.re2.yahoo.com [206.190.36.82]) by mx1.FreeBSD.org (Postfix) with SMTP id 9C03A43D6D for ; Sun, 28 May 2006 13:14:50 +0000 (GMT) (envelope-from mj001@rogers.com) Received: (qmail 22054 invoked from network); 28 May 2006 13:14:49 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rogers.com; h=Received:Subject:From:To:Cc:In-Reply-To:References:Content-Type:Date:Message-Id:Mime-Version:X-Mailer:Content-Transfer-Encoding; b=uKaAVDxRfFuzqySsFWz8FU569hMJD/Bb+VORwZpX6rL86ufhSBJoSdyzGOGC/jXILSP54uxsGe2ikEtcroMDyJKahog6uECMiekUiwPwgSUf5S9AbPwA3EEvr+GUrsGacn9UPCLOKktvr6wElniLNcoSIqd7+NM7lbZ0/9+Ep7g= ; Received: from unknown (HELO chaucer.jeays.ca) (mj001@rogers.com@72.139.51.96 with plain) by smtp104.rog.mail.re2.yahoo.com with SMTP; 28 May 2006 13:14:49 -0000 From: Mike Jeays To: Grant Peel In-Reply-To: <00d601c68254$b814c330$6501a8c0@grant> References: <00d601c68254$b814c330$6501a8c0@grant> Content-Type: text/plain Date: Sun, 28 May 2006 09:14:43 -0400 Message-Id: <1148822083.95778.100.camel@chaucer.jeays.ca> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: 2>&1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 13:14:55 -0000 On Sun, 2006-05-28 at 08:46 -0400, Grant Peel wrote: > Hi all, > > When using cron, I understand the >/dev/null thing OK, but what exactly does > >2&1 do? Is it usefull anywhere else? Where might one find ducumentation on > it? > > -Grant > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" It directs both stdout and stderr to /dev/null. Look in 'man bash', or any tutorial on bash for a more detailed description. Quite confusing syntax, and a hard-to-remember incantation, IMHO. -- Mike Jeays http://ca.geocities.com/mike.jeays@rogers.com From owner-freebsd-questions@FreeBSD.ORG Sun May 28 13:41:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 565F116A925 for ; Sun, 28 May 2006 13:41:08 +0000 (UTC) (envelope-from xfb52@dial.pipex.com) Received: from smtp-out3.blueyonder.co.uk (smtp-out3.blueyonder.co.uk [195.188.213.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id A3F5543D48 for ; Sun, 28 May 2006 13:41:06 +0000 (GMT) (envelope-from xfb52@dial.pipex.com) Received: from [172.23.170.138] (helo=anti-virus01-09) by smtp-out3.blueyonder.co.uk with smtp (Exim 4.52) id 1FkLVx-00084I-M3; Sun, 28 May 2006 14:41:06 +0100 Received: from [82.41.33.243] (helo=[192.168.0.2]) by asmtp-out2.blueyonder.co.uk with esmtp (Exim 4.52) id 1FkLVl-0007er-Rp; Sun, 28 May 2006 14:40:53 +0100 Message-ID: <4479A865.6070004@dial.pipex.com> Date: Sun, 28 May 2006 14:40:53 +0100 From: Alex Zbyslaw User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-GB; rv:1.7.13) Gecko/20060515 X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <200605270046.04333.beech@alaskaparadise.com> <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> <200605280512.09645.beech@alaskaparadise.com> In-Reply-To: <200605280512.09645.beech@alaskaparadise.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 13:41:11 -0000 On Saturday 27 May 2006 01:12, Kyrre Nygard wrote: >> Yeah I hear a lot of people like CVS. >> >>But I fail to realize how it might assist me though. >> >>I'm not setting up a code repository, this is an actual WWW root >>where a lot of different websites are hosted. >> >>Please correct me if I'm wrong. >> >> You are wrong. CVS is a version control system. It's often used to control software development, but can be used to control any kind of text(*) document development. --Alex (*) You can store "binary" files as well, but it is less efficient when they change as it cannot keep diffs, just complete changed files. OK for reasonable sized gifs/jpegs etc. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 13:59:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3033816B207 for ; Sun, 28 May 2006 13:59:29 +0000 (UTC) (envelope-from yzcscmzyf@bluearrow.com) Received: from bluearrow.com (abjc141.neoplus.adsl.tpnet.pl [83.7.144.141]) by mx1.FreeBSD.org (Postfix) with SMTP id E246F43D67 for ; Sun, 28 May 2006 13:59:25 +0000 (GMT) (envelope-from yzcscmzyf@bluearrow.com) Received: from localhost.localdomain (PaWLxJDT40.mail3world.com [209.88.189.20]) by 209.88.189.20 (Postfix) with SMTP id eehzoecsbrdw for ; Sun, 28 May 2006 15:59:34 +0100 Date: Sun, 28 May 2006 15:59:34 +0100 From: "flgtvztq xibpzof" To: Content-return: allowed X-Mailer: phpmailer [version 1.41] X-Trailer: PHP Data URLENCODED 1 X-Authentication-Warning: localhost.localdomain: apache set sender to yzcscmzyf@bluearrow.com using -f X-Virus-Scanned: amavisd-new at mail2world.com Mime-Version: 1.0 Content-Type: text/plain Message-Id: <79594306266560.mar5u3ee80@KUNRAD> Subject: [Re] Nothing like it CTXE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 13:59:53 -0000 CTXE***CTXE***CTXE***CTXE***CTXE***CTXE***CTXE Get CTXE First Thing Today, Check out for HOT NEWS!!! CTXE - CANTEX ENERGY CORP CURRENT_PRICE: $0.53 GET IT N0W! Before we start with the profile of CTXE we would like to mention something very important: There is a Big PR Campaign starting this weeek . And it will go all week so it would be best to get in NOW. Company Profile Cantex Energy Corporation is an independent, managed risk, oil and gas exploration, development, and production company headquartered in San Antonio, Texas. Recent News Cantex Energy Corp. Announces Completion of the GPS Survey Today and the Mobilization of Seismic Crews for Big Canyon 2D Swath, Management would like to report The GPS surveying of our Big Canyon 2D Swath Geophysical program is being completed today. The crew that has been obtained to conduct the seismic survey (Quantum Geophysical) will be mobilizing May 30 (plus or minus 2 days) to the Big Canyon Prospect. It will take the crews about 3 to 4 days to get all the equipment (cable and geophones) laid out on the ground and then another day of testing so we should be in full production mode on or around the 4th or 5th of June. Once the first of three lines are shot we will then get data processed and report progress on a weekly basis. Cantex Energy Corp. Receiving Interest From the Industry as It Enters Next Phase of Development Cantex Energy Corp. (CTXE - News) is pleased to report the following on its Big Canyon Prospect in West Texas. Recent company announcements related to the acquisition of over 48,000 acres of a world-class prospect has captured the attention of many oil & gas industry experts and corporations, who have recently inquired into various participation opportunities ranging from sharing science technology to support findings or expertise to drill, operate and manage wells. Trace Maurin, President of Cantex, commented, "Although we are a small independent oil & gas company, we have a very unique 0pp0rtunity in one of the last under-explored world-class potential gas plays with no geopolitical risks and the industry is starting to take notice. As we prepare to prove up the various structures within our prospect later this month, we are increasing our efforts to communicate on our progress to our shareholders and investors. Our intention is to provide investors with a better understanding of the full potential of this prospect as we embark on the next phase of operations." Starting immediately the company will undertake CEO interviews, radio spots (which will be recorded and published on the company website), publication placements, introductions to small cap institutional investors and funds all in an effort to optimize market awareness and keep our shareholder well informed. GET IN NOW Happy memorial day Throw pearls before swine. Water it down. She's the apple of my eye. Treat him like dirt. Take time to smell the roses. Your ass is grass. The silly season. Wait and see. Walking on cloud nine. Under the weather. Shit end of the stick. She's the apple of my eye. A tree does not move unless there is wind. Turn over a new leaf. The way to a man's heart is through his stomach. Sour as a green apple. That's water under the bridge. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 14:09:54 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CA10116B253 for ; Sun, 28 May 2006 14:09:54 +0000 (UTC) (envelope-from exiaf_radar_guy38@yahoo.co.in) Received: from web8915.mail.in.yahoo.com (web8915.mail.in.yahoo.com [203.84.221.147]) by mx1.FreeBSD.org (Postfix) with SMTP id E989143D79 for ; Sun, 28 May 2006 14:09:45 +0000 (GMT) (envelope-from exiaf_radar_guy38@yahoo.co.in) Received: (qmail 89034 invoked by uid 60001); 28 May 2006 14:09:43 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.in; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=HRxzXy3VHW3wajGu/VoAQ32qZ5m3QUWCxkycx+YXlaghWc5mZVC5ZdzqH3z84LdteTdg656Dugec9YjQZ7XpddHAGct43d2bnOTqWOKM+nB0lduq5LW0uT1zzVAMBjQGenC8tvYaDgb9aE6Dpwjxkg/XffwdpS9tznUMOC7pEIY= ; Message-ID: <20060528140943.89032.qmail@web8915.mail.in.yahoo.com> Received: from [203.134.203.154] by web8915.mail.in.yahoo.com via HTTP; Sun, 28 May 2006 15:09:43 BST Date: Sun, 28 May 2006 15:09:43 +0100 (BST) From: dharam paul To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Subject: n00b Maintenance Question , please help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 14:10:09 -0000 Hi, I am using freebsd 5.4 as a server. Being a newbei I do not know what all maintanace things are to be done to the system so that the system runs smoothly without any problem. I am running squid + squidguard + apache (for intranet only) other than the standard ports. Please advise. Thanks Dharam Paul Send instant messages to your online friends http://in.messenger.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sun May 28 14:25:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7936F16B92C for ; Sun, 28 May 2006 14:25:13 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.173]) by mx1.FreeBSD.org (Postfix) with ESMTP id 56C0943D46 for ; Sun, 28 May 2006 14:25:12 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so96832uge for ; Sun, 28 May 2006 07:25:11 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=q4Mf2jes5i3MxjWHTXnkRukC9XzTUDBl7aLY3GvodYhshXXxiMMe3oDMSasxpXeDu55QvdtBbiCwA0x2hyUx+kypICZXnkVIcxlUxFXx3QIFjyQP91RHBcUrr8A79PAsZ9Bt9wBAXZIT7lvYy7uaMGAUP7gk9WxFYY5dKA0EEuA= Received: by 10.78.40.10 with SMTP id n10mr192794hun; Sun, 28 May 2006 07:18:18 -0700 (PDT) Received: by 10.78.16.16 with HTTP; Sun, 28 May 2006 07:18:18 -0700 (PDT) Message-ID: <18e02bd30605280718w58bb10f6wd8d553cc603a5081@mail.gmail.com> Date: Sun, 28 May 2006 17:18:18 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <20060528140943.89032.qmail@web8915.mail.in.yahoo.com> MIME-Version: 1.0 References: <20060528140943.89032.qmail@web8915.mail.in.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: n00b Maintenance Question , please help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 14:25:17 -0000 Read the handbook On 5/28/06, dharam paul wrote: > > Hi, > I am using freebsd 5.4 as a server. Being a newbei I > do not know what all maintanace things are to be done > to the system so that the system runs smoothly without > any problem. > I am running squid + squidguard + apache (for intranet > only) other than the standard ports. > > Please advise. > Thanks > Dharam Paul > > > Send instant messages to your online friends http://in.messenger.yahoo.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sun May 28 14:53:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8FECE16AFC9 for ; Sun, 28 May 2006 14:53:15 +0000 (UTC) (envelope-from shawnh@f2s.com) Received: from outmail.freedom2surf.net (outmail1.freedom2surf.net [194.106.33.237]) by mx1.FreeBSD.org (Postfix) with ESMTP id 34BBE43D58 for ; Sun, 28 May 2006 14:53:14 +0000 (GMT) (envelope-from shawnh@f2s.com) Received: from freeBSD (i-83-67-13-3.freedom2surf.net [83.67.13.3]) by outmail.freedom2surf.net (Postfix) with ESMTP id 32F703A412C for ; Sun, 28 May 2006 15:53:13 +0100 (BST) Date: Sun, 28 May 2006 15:54:06 +0100 From: Shawn To: freebsd-questions@freebsd.org Message-ID: <20060528155406.369efa7e@freeBSD> In-Reply-To: <20060528132805.475e8850@freeBSD> References: <20060527011413.738aecd3@freeBSD> <20060528001836.GA42222@ibm.maison> <20060528050235.GA19706@xor.obsecurity.org> <20060528132805.475e8850@freeBSD> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Strange pauses and cpu usage - FreeBSD 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 14:53:19 -0000 OK, so I was using top to monitor what was going on inside the system and I noticed that it was in fact xorg taking up all the cpu, no matter what program actually was causing it. I searched around for nvidia xorg.conf settings and found a few things. I recompiled my kernel without agp and put the following in xorg.conf: Option "NvAGP" "1" And this has solved the problem completely. I have always used the built in agp support when using linux (agpgart?) but doing this has cured the ill mouse behaviour completely, and boosted glxgears a few hundred fps. Again, thanks for all the help! From owner-freebsd-questions@FreeBSD.ORG Sun May 28 15:26:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 07A5B16B754 for ; Sun, 28 May 2006 15:26:11 +0000 (UTC) (envelope-from aren.tyr@gawab.com) Received: from info10.gawab.com (info10.gawab.com [204.97.230.43]) by mx1.FreeBSD.org (Postfix) with SMTP id BE53143D64 for ; Sun, 28 May 2006 15:26:09 +0000 (GMT) (envelope-from aren.tyr@gawab.com) Received: (qmail 20324 invoked by uid 1004); 28 May 2006 15:28:53 -0000 Received: from unknown (HELO yggdrasil) (aren.tyr@gawab.com@62.56.121.23) by gawab.com with SMTP; 28 May 2006 15:28:53 -0000 X-Trusted: Whitelisted From: Aren Olvalde Tyr To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 16:25:58 +0100 User-Agent: KMail/1.9.1 References: <20060522230755.3ec1b02e@devil.troback.com> In-Reply-To: <20060522230755.3ec1b02e@devil.troback.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart5062300.CfRJVJdgTE"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605281626.06877.aren.tyr@gawab.com> Subject: Re: Missing devs... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 15:26:12 -0000 --nextPart5062300.CfRJVJdgTE Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi > So now to my question! How do I avoid this dual mounting? I have the same problem with my memory card reader.=20 The necessary da1s1 device node slice for my SD memory card is not created= =20 until after it has been probed during the attempt to mount it. The only=20 exception to this is if the card is already inserted when the system first= =20 boots up. Presumably there must be a way to automatically probe the USB device/card a= nd=20 create the slice so you can mount it when it is first inserted? I am wondering if /etc/usbd.conf would be of assistance here. Can you get t= he=20 usbd daemon to automatically "probe" a device for filesystem slices during= =20 the "attach" stage? Aren. --nextPart5062300.CfRJVJdgTE Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEecEOoWGxb6IQ4B4RAgbhAKCMofD3wrsiRhubb5Q3wz7eP865BwCfYTm2 +/j0hNIPi0G7FqHP8Q5QbI4= =9feM -----END PGP SIGNATURE----- --nextPart5062300.CfRJVJdgTE-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 15:38:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8F6D716BD2B for ; Sun, 28 May 2006 15:38:14 +0000 (UTC) (envelope-from aren.tyr@gawab.com) Received: from info10.gawab.com (info10.gawab.com [204.97.230.43]) by mx1.FreeBSD.org (Postfix) with SMTP id D440843D5D for ; Sun, 28 May 2006 15:38:11 +0000 (GMT) (envelope-from aren.tyr@gawab.com) Received: (qmail 8796 invoked by uid 1004); 28 May 2006 15:40:56 -0000 Received: from unknown (HELO yggdrasil) (aren.tyr@gawab.com@62.56.121.23) by gawab.com with SMTP; 28 May 2006 15:40:56 -0000 X-Trusted: Whitelisted From: Aren Olvalde Tyr To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 16:37:55 +0100 User-Agent: KMail/1.9.1 References: In-Reply-To: MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart5394947.zOiVXHfbWZ"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605281638.03982.aren.tyr@gawab.com> Subject: Re: Package management utility for KDE? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 15:38:24 -0000 --nextPart5394947.zOiVXHfbWZ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Friday 26 May 2006 17:01, Matias wrote: > Hi, KDE fan ahead.... > > Is there any visual FreeBSD package management tool for QT/KDE? Yes, KPackage.=20 It is part of the kdeadmin port under sysutils/kdeadmin3. There is also=20 Portbrowser under sysutils/portbrowser. Aren. --nextPart5394947.zOiVXHfbWZ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEecPboWGxb6IQ4B4RAvmbAJ9XE2v6b3mPC7IiL8l++cmcMsd+zwCbBLHZ 5VYuK/xB8fNrWS5pLLVYarE= =OWqV -----END PGP SIGNATURE----- --nextPart5394947.zOiVXHfbWZ-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 15:39:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB49816BF61 for ; Sun, 28 May 2006 15:39:22 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.175]) by mx1.FreeBSD.org (Postfix) with ESMTP id 902C743D7E for ; Sun, 28 May 2006 15:39:16 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so111950uge for ; Sun, 28 May 2006 08:39:15 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=FyFqyfHaXkDrm3IyAMI/dRfIOKG7Jlmg3egYTUOf+J3R8BqB9WwHEb/upcZQLQmW5TLiydVofQcS4mo3hSSZPaOfJpCStIgVIG4qIuGP+U29JqVU3OxXo388aOXA3osR9XrTPhcCV72vEtVAJ9uww98xKZe/7OxlQttUhkF3H9Y= Received: by 10.78.45.13 with SMTP id s13mr202342hus; Sun, 28 May 2006 08:39:15 -0700 (PDT) Received: by 10.78.16.15 with HTTP; Sun, 28 May 2006 08:39:14 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 17:39:14 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Problem with BCM4306 driver X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 15:39:32 -0000 I have a HP nx6110 laptop, and decided to install FreeBSD 6.1. Quite frankly I am surprised by the power and fine design this system has. This is definitely a better server than linux. I am a complete newbie in BSD, so please excuse me if my question sounds very stupid. I am trying to make my integrated wireless card Broadcom 4306 work. Since there are no native drivers I adopted the ndis approach. Howevet there seem to be two ways to do this, one is using ndiscvt and the other with ndisgen. I tried both but none worked: 1. USING ndiscvt I copied the driver to /sys/modules/if_ndis, and then: # ndiscvt -i BCMWL5A.INF -s BCMWL5.SYS -o ndis_driver_data.h # make && make install # kldload ndis && kldload if_ndis However I am not seeing the interface when run ifconfig. It behaves as if nothig is there. I also tried to recompile ndis & if_ndis from their sources in /usr/src/sys/modules but nothing worked. The adapter simple does not appear. However when I run pciconf -lv I see the pci card. 2. USING ndisgen I copied the drivers to the same folder and run ndisgen BCMWL5.INF BCMWL5.SYS. Everything goes ok but I get an error in the last step when I try to compile it. Then I tried to redirect the output if ndisgen to a pipe and it miracolously generated a file BCMWL5_SYS. This I copied to /boot/kernel and loaded ndis, if_ndis, BCMWL5_SYS. However again the adapter does not appear in ifconfig. I cannot see what is going wrong, because I just followed some HOWTOs that appear in the FreeBSD Handbook (of ndiscvt) and some other forum (about ndisgen). Any help would be greatly appreciated. Atanas From owner-freebsd-questions@FreeBSD.ORG Sun May 28 15:47:22 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 79B3316AA3C for ; Sun, 28 May 2006 15:47:22 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from gaia.nimnet.asn.au (nimbin.lnk.telstra.net [139.130.45.143]) by mx1.FreeBSD.org (Postfix) with ESMTP id 82C3843D53 for ; Sun, 28 May 2006 15:47:20 +0000 (GMT) (envelope-from smithi@nimnet.asn.au) Received: from localhost (smithi@localhost) by gaia.nimnet.asn.au (8.8.8/8.8.8R1.4) with SMTP id BAA28925; Mon, 29 May 2006 01:47:11 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Mon, 29 May 2006 01:47:10 +1000 (EST) From: Ian Smith To: Matthew Seaman In-Reply-To: <44795BBD.3060500@infracaninophile.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: questions@freebsd.org Subject: Re: phpMyAdmin problem - no Edit/Delete on Browse X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 15:47:23 -0000 On Sun, 28 May 2006, Matthew Seaman wrote: > Ian Smith wrote: > > running 5.4-RELEASE and installed phpMyAdmin 2.6.1.3 with pkg_add -r [..] > > mysql-client-4.1.10a Multithreaded SQL database (client) > > mysql-server-4.1.10a Multithreaded SQL database (server) > > php4-4.3.10_2 PHP Scripting Language (Apache Module and CLI) > > phpMyAdmin-2.6.1.3 A set of PHP-scripts to manage MySQL over the web [..] > > phpmyadmin basically works fine. I'd imported my databases from dumps, > > and all looked good after a bit of configuration. However when starting > > to do some real work on a couple of databases, I noticed that while > > browsing any database, the Edit and Delete options do not appear with > > each row, ie I can not update existing records (even as -u root) > > > > I'd suspected permissions, but I can insert new records, add/drop/empty > > tables and databases, bookmark queries and all. The permissions and > > ownership of and in /var/db/mysql are the same as my old 4.5-R system. > > > > $cfg['ModifyDeleteAtLeft'] = TRUE; I've also tried adding ...AtRight as > > well, but neither show up. If relevant, I'm using apache-1.3.33_1 and > > mozilla-1.7.7,2 .. all of this is just running on the local machine, so > > I'm not at the moment concerned with just security-issue updates. [..] > What is the UID *within* MySQL you are using to connect with? Does > running: > > SHOW GRANTS FOR `user`@`hostname` ; > > make things any clearer? Nope. Show processlist confirms that I'm logged in as root@localhost, with an idle pma@localhost process as well for bookmarks etc. SHOW GRANTS FOR `root`@`localhost`; GRANT ALL PRIVILEGES ON *.* TO 'root'@'localhost' IDENTIFIED BY PASSWORD '*A5------------obscured------------4C2EFF' WITH GRANT OPTION > phpMyAdmin is clever enough to modify its user interface according to what > the user has permission to do to the database. The user name use within the > database depends on how you've configured phpMyAdmin -- I generally like to > use 'cookie' mode authentication where the username and password are passed > straight through to MySQL from the login dialog, but the 'config' mode given > in the example config files requires you to put the username and password > directly in the phpMyAdmin configuration file. Just using 'config' mode, user root so far; thought I'd tighten it up properly for outside access after getting it doing some useful work! Think I'll start again with the installed config. I really can't recall if this problem was there since installation, but as mentioned all other import/export, create/drop/copy database/table, adding rows etc all just works well so far, excepting edit/delete availability on browse. Thanks Matthew, cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Sun May 28 15:47:38 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0DCDA16C369 for ; Sun, 28 May 2006 15:47:38 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33314.mail.mud.yahoo.com (web33314.mail.mud.yahoo.com [68.142.206.129]) by mx1.FreeBSD.org (Postfix) with SMTP id A505F43D53 for ; Sun, 28 May 2006 15:47:37 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 81235 invoked by uid 60001); 28 May 2006 15:47:37 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=wiC+/PDYEp69+xAkzDBP3KtrMUZ5EYVmTMfxauTfMoINYCpVl2xvkrk2WnQIevipuwPM4ES3qjjFim8VxTfODTFv5buao4ZXxJcUzUZ/pFD7QvRcT+U+oDuGCvVLaqpbq/P5bIGc0ifbhUXoUlw7+Jz74hCFN+k7HruhM3YhTSk= ; Message-ID: <20060528154737.81233.qmail@web33314.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33314.mail.mud.yahoo.com via HTTP; Sun, 28 May 2006 08:47:37 PDT Date: Sun, 28 May 2006 08:47:37 -0700 (PDT) From: Danial Thom To: Shawn , freebsd-questions@freebsd.org In-Reply-To: <20060528132805.475e8850@freeBSD> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: Re: Strange pauses and cpu usage - FreeBSD 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 15:47:40 -0000 --- Shawn wrote: > On Sun, 28 May 2006 01:02:35 -0400 > Kris Kennaway wrote: > > > On Sun, May 28, 2006 at 02:18:36AM +0200, > Xavier Chantry wrote: > > > On Sat, May 27, 2006 at 01:14:13AM +0100, > Shawn wrote: > > > > I'm having a strange problem with cpu > usage with my Athlon XP. > > > > Every so often there seems to be a pause > where the system comes > > > > under heavy load for no apparent reason. > If xmms was playing then > > > > I get a buzz sound and the mouse pointer > stops just for a split > > > > second, the same with mplayer and vlc. > Using Opera or firefox > > > > also seems to have a strange effect where > the mouse pointer > > > > freezes while pages load, and if there is > an animated gif on the > > > > page the cpu usage goes to 100%. > > > > > > > > The jabber client Gajim also makes the > cpu get stuck at 100%. > > > > When I used gnome, nautilus did the same > thing until i stopped > > > > and started the process in the system > monitor. I have searched > > > > around and found this tip from the > handbook but it had no effect. > > > > > > > > hint.apic.0.disabled="1" in > /boot/loader.conf > > > > > > > > This happens with the generic kernel and > the one i compiled for > > > > myself. It also lasts for a random amount > of time, sometimes it > > > > is barely noticeable and sometimes it > happens for over a second. > > > > Running neverwinter nights makes the > system pause for 10-20 > > > > seconds seemingly randomly. > > > > > > > > > > My system behaves much better than that, > I've no mouse freeze and no > > > system pauses, but I did have occasonial > sound skips using 4bsd on > > > 6.1. Switching to the ULE scheduler seems > to fix this problem, but > > > other things may behave worse. > > > One year ago, it was actually the opposite, > sound in ULE was really > > > jerky, and mouse pointer too while eg > launching an app. > > > Did you already try both schedulers ? > > > > Check for interrupt sharing with vmstat -i. > Shared interrupts cause > > performance loss especially if it's sharing > with a giant-locked driver > > like USB. > > > > Kris > > I tried switching to ULE and while the sound > skipping seems to have > stopped, the other problems remain. > > vmstat -i gives me: > > interrupt total > rate > irq0: clk 69873 > 984 > irq7: ppc0 2 > 0 > irq8: rtc 8944 > 125 > irq10: atapci0++ 2409 > 33 > irq11: nvidia0++ 5264 > 74 > irq12: pcm0 rl0+ 41 > 0 > irq15: ata1 47 > 0 > Total 86580 > 1219 > > So it seems that net and sound are sharing > irq12, and just before i > see the freeBSD bootloader i can see that irq12 > is used for the usb > controller. Is this my problem? I have no irq > settings in the > BIOS and i tried a device hint for pcm to move > it up to irq13 but had no > luck. > > Forgive me if I am missing something obvious > somewhere along the line, > I only started using freeBSD a few weeks ago > and I am totally new to > BSD in general. > > Thanks for the help! > > ~shawn Setting HZ to 100 should eliminate ~900 unnecessary context switches per second. Danial __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sun May 28 16:00:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E64C16C2CE for ; Sun, 28 May 2006 16:00:35 +0000 (UTC) (envelope-from don.hinton@vanderbilt.edu) Received: from mailgate03.smtp.vanderbilt.edu (mailgate03.smtp.Vanderbilt.Edu [129.59.1.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 39E5543D72 for ; Sun, 28 May 2006 16:00:27 +0000 (GMT) (envelope-from don.hinton@vanderbilt.edu) Received: from smtp10.smtp.vanderbilt.edu (smtp10.smtp.Vanderbilt.Edu [129.59.1.11]) by mailgate03.smtp.vanderbilt.edu (8.13.6/8.13.6) with ESMTP id k4SG0QMC011887 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Sun, 28 May 2006 11:00:26 -0500 Received: from smtp10.smtp.vanderbilt.edu (localhost [127.0.0.1]) by smtp10.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9C+d3.7.9) with ESMTP id k4SG0RXU017200; Sun, 28 May 2006 11:00:27 -0500 (CDT) Received: from [192.168.1.113] (c-69-180-220-12.hsd1.tn.comcast.net [69.180.220.12]) by smtp10.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9.3B+d3.7.9) with ESMTP id k4SG0QPK017197 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sun, 28 May 2006 11:00:26 -0500 (CDT) From: Don Hinton Organization: ISIS To: freebsd-questions@freebsd.org Date: Sun, 28 May 2006 11:00:20 -0500 User-Agent: KMail/1.9.1 References: <200605281439.40203.menwn@yahoo.co.uk> In-Reply-To: <200605281439.40203.menwn@yahoo.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200605281100.21662.don.hinton@vanderbilt.edu> X-Proofpoint-Virus-Version: vendor=fsecure engine=4.64.4171:2.3.9, 1.2.33, 4.0.164 definitions=2006-05-26_02:2006-05-24, 2006-05-26, 2006-05-26 signatures=0 X-PPS: No, score=0 Cc: andreas Sotirakopoulos Subject: Re: Wireless internet connetction issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 16:00:39 -0000 Hi Andreas: On Sunday 28 May 2006 06:39, andreas Sotirakopoulos wrote: > Hi > I have(?) an internet connetction issue... I have a router connected to a > windows box downstaires (Lynksis wAG354G) and i use a wirelless usb adapt= er > (Lynksis WUSB54G). It works fine under windows and even if some times the > signal is lost usually it comes back by either moving the antenna a little > or by restarting the network configuration tool. In FreeBSD the adapter is > visible and uses ural0 driver. So if give the command > ifconfig ural0 inet 192.168.1.65 netmask 255.255.255.0 but i cannot conne= ct Instead of specifying your IP, try letting dhcp take care of this for you (= as=20 you do with kde below). Add the following to /etc/rc.conf: ifconfig_ural0=3D"DHCP" Then, ifconfig ural0 up will invoke dhcp to configure everything for you,=20 including your gateway and routing table. You may also want to look at you= r=20 routing table to see what's going on: # netstat -nr And flush the table if things go wrong with: # netstat flush I have to do this when moving from a wired connection to a wireless connect= ion=20 in order to reset my default route (gateway). Btw, I use FreeBSD 6.1-RELEA= SE=20 =2D- I found 5.4 wireless to be a bit flaky... hth... don > to the internet or "see" the windows box. > Now comes the strange part. if i press ifconfig ural0 i get: > > ural0: flags=3D108843 = mtu > 1500 > =A0 =A0 =A0 =A0 inet6 fe80::212:17ff:fe81:881a%ural0 prefixlen 64 scopeid= 0x1 > =A0 =A0 =A0 =A0 ether 00:12:17:81:88:1a > =A0 =A0 =A0 =A0 media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36M= bps) > =A0 =A0 =A0 =A0 status: associated > =A0 =A0 =A0 =A0 ssid linksys channel 11 bssid 00:14:bf:cb:71:32 > =A0 =A0 =A0 =A0 authmode OPEN privacy OFF txpowmax 100 protmode CTS bintv= al 100 > but still i cannot connect to web pages or ping hosts. =A0I use KDE 3.5 a= nd i > do the following: > from the Kmenu ->settings->internet and Network-> Network settings and on > the card Network interfaces i see that there is only onde availiable > interface fxp0 dhcp Disabled Ethernet Network Device. I know that this is > my ethernet onboard card but if i choose Enable Interface i can connect to > the internet!!!!!! I assume that something runs in the background that > enables as well my wireless card but what is this? > So what's the problem you may ask... the problem is that in case that my > connection is lost i cannot do anything to get it back up. > > i =A0have tried dhclient ural0 and nothing happents same with ifconfig ur= al0 > up... > I have to reboot and do the procudure again and the problem is that it > fails often if i leave the net for a while... > > Any ideas? > thanks > > > ___________________________________________________________ > To help you stay safe and secure online, we've developed the all new Yaho= o! > Security Centre. http://uk.security.yahoo.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" =2D-=20 Don Hinton tel: 615.480.5667 ISIS, Vanderbilt University skype: donhinton http://people.vanderbilt.edu/~don.hinton/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 16:06:10 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A850416ACD6 for ; Sun, 28 May 2006 16:06:10 +0000 (UTC) (envelope-from peo@intersonic.se) Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.8.98]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1B59343D70 for ; Sun, 28 May 2006 16:06:09 +0000 (GMT) (envelope-from peo@intersonic.se) Received: from localhost (terrapin.inter-sonic.com [172.16.1.12]) by neonpark.inter-sonic.com (Postfix) with ESMTP id 37688818E5B for ; Sun, 28 May 2006 18:06:08 +0200 (CEST) Message-ID: <4479CA6A.2030102@intersonic.se> Date: Sun, 28 May 2006 18:06:02 +0200 From: Per olof Ljungmark User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: swap_pager: indefinite wait buffer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 16:06:12 -0000 HP ProLiant ML150, 6.1-STABLE, problem have persisted since 6.0-STABLE Stops responding every one-two weeks, requires power cycling Server is remote but went to see it today and the following message was printed on console repeatedly: "swap_pager: indefinite wait buffer: bufobj: 0, blkno: 52, size: 4096" Searching the list did not return a definitive answer, did not find a PR either. Nothing logged AFAIK the system hardly swaps at all Is there a workaround for this? Should I assume it's a hw problem? Change DMA mode? Disable ACPI? Change to a scsi disk for system? I could accept slower performance if a tradeoff is required. dmesg follows: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #0: Thu May 18 07:19:43 CEST 2006 peo@stuffer.sth.starlight.se:/usr/obj/usr/src/sys/STUFFER Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff Features2=0x641d> AMD Features=0x20100000 Logical CPUs per core: 2 real memory = 1073152000 (1023 MB) avail memory = 1041211392 (992 MB) MPTable: ioapic0: Assuming intbase of 0 ioapic1: Assuming intbase of 24 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pcib0: unable to route slot 2 INTA pcib0: unable to route slot 3 INTA pcib0: unable to route slot 29 INTB pcib0: unable to route slot 29 INTD pcib1: irq 10 at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 10 at device 3.0 on pci0 pci2: on pcib2 bge0: mem 0xdc100000-0xdc10ffff irq 16 at device 0.0 on pci2 miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:16:35:b1:32:0b pcib3: at device 28.0 on pci0 pci3: on pcib3 twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x2400-0x240f mem 0xdc800000-0xdcffffff irq 25 at device 2.0 on pci3 twe0: [GIANT-LOCKED] twe0: 4 ports, Firmware FE8S 1.05.00.068, BIOS BE7X 1.08.00.048 atapci0: port 0x2000-0x20ff mem 0xdc300000-0xdc3fffff irq 27 at device 4.0 on pci3 ata2: on atapci0 ata3: on atapci0 ata4: on atapci0 ata5: on atapci0 uhci0: port 0x1400-0x141f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1420-0x143f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: at device 29.4 (no driver attached) pci0: at device 29.5 (no driver attached) ehci0: mem 0xdc001400-0xdc0017ff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib4: at device 30.0 on pci0 pci4: on pcib4 pci4: at device 4.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1440-0x144f at device 31.1 on pci0 ata0: on atapci1 ata1: on atapci1 pci0: at device 31.3 (no driver attached) pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcdfff,0xce000-0xcefff,0xdc000-0xdffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (port) unknown: can't assign resources (irq) unknown: can't assign resources (port) Timecounter "TSC" frequency 2992517880 Hz quality 800 Timecounters tick every 1.000 msec acd0: CDROM at ata0-master UDMA33 ad4: 152627MB at ata2-master SATA150 twed0: on twe0 twed0: 858563MB (1758337920 sectors) Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: mount pending error: blocks 4 files 1 WARNING: /home was not properly dismounted bge0: link state changed to UP From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:22:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E4FF16C7A5 for ; Sun, 28 May 2006 17:22:50 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2DA443D58 for ; Sun, 28 May 2006 17:22:47 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so391946nzf for ; Sun, 28 May 2006 10:22:46 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=mVguxlT6ZCwf5gtXK51anJyLSk7AdxQ+/QszR+kvdS0BxnUtwwV5SEzSsSfpoFeOR2K1D2Yu+XVLgmzfsC4FKbVe3DERTSSNEmKnBRU2KjOV9MHXgJ1Mk4pwEMKBLYHvfPpJAgkLulOee/Y4G2Wk3Z6Re6cBQt6OlFIoWKhchgg= Received: by 10.36.103.8 with SMTP id a8mr1992314nzc; Sun, 28 May 2006 10:22:46 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 10:22:46 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 12:22:46 -0500 From: "Nikolas Britton" To: "william wallace" In-Reply-To: <87ab37ab0605280440t4b40f716xa78d47b7983e52ad@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-2022-JP; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <87ab37ab0605272028o54e0a2c9x65cc69ffc6c0e3af@mail.gmail.com> <87ab37ab0605280440t4b40f716xa78d47b7983e52ad@mail.gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: what is the use of drm_os_freebsd.h X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:22:58 -0000 On 5/28/06, william wallace wrote: > thanku sir$B!*(B > but why there r so many datat type similar to linux in that group of files? This is another guess... Probably because DRM is a Linux thing, or at least got it's start in Linux and then was ported to BSD.... There are comments in the source code you can read to tell you whats what. > On 5/28/06, Nikolas Britton wrote: > > On 5/27/06, william wallace wrote: > > > hi ,all > > > I am porting something from linux to freebsd ,i found the > > > DataTypes hard to translate ,then i saw that many types inlinux can be > > > found in drm_os_freebsd.h,such as > > > typedef int8_t s8; > > > typedef int16_t s16; > > > typedef int32_t s32; > > > typedef u_int8_t u8; > > > typedef u_int16_t u16; > > > typedef u_int32_t u32; > > > > > > so ,what is the use of drm_os_freebsd.h > > > and any advice for me to translate DT from linux to Freebsd? > > > > > > > "The Direct Rendering Manager (DRM) is a device-independent > > kernel-level device driver that provides support for the XFree86 > > Direct Rendering Infrastructure (DRI)." --src/sys/dev/drm/drm.h > > > > I can't find the file your talking about so this is just a guess. > > > > > > > > -- > > BSD Podcasts @: > > http://bsdtalk.blogspot.com/ > > http://freebsdforall.blogspot.com/ > > > > > -- > we who r about to die,salute u! > -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:26:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 472F716A5B7 for ; Sun, 28 May 2006 17:26:36 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id C5B3943D48 for ; Sun, 28 May 2006 17:26:35 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so392448nzf for ; Sun, 28 May 2006 10:26:35 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=Brf60snsJqTvLQ8cpzK09zjG24/AjIa0R1RlLz1CQwkN7WNhIzSlWkr4sj+bB2nGkMgfzQJS70x+Aq599CkeKm7D2t2kZvaJR0eSXfk1A+/7mlBbDYbcSFxpw0ijZW7MV1z7tdOd5sJMrCfUmy+iTPZcqqwZ7dMVALG2UL7IXts= Received: by 10.36.227.60 with SMTP id z60mr2006326nzg; Sun, 28 May 2006 10:26:35 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 10:26:35 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 12:26:35 -0500 From: "Nikolas Britton" To: fbsdq MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Subject: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:26:46 -0000 Does FreeBSD / UFS2 offer on the fly disk compression like windows NTFS doe= s? --=20 BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:26:59 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4CD9016C1D6 for ; Sun, 28 May 2006 17:26:59 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [81.187.76.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5A26543D48 for ; Sun, 28 May 2006 17:26:57 +0000 (GMT) (envelope-from m.seaman@infracaninophile.co.uk) Received: from [IPv6:::1] (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.13.6/8.13.6) with ESMTP id k4SHQrrZ011960; Sun, 28 May 2006 18:26:53 +0100 (BST) (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <4479DD56.3040306@infracaninophile.co.uk> Date: Sun, 28 May 2006 18:26:46 +0100 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Ian Smith References: In-Reply-To: X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/signed; micalg=pgp-ripemd160; protocol="application/pgp-signature"; boundary="------------enig08A1C687B4DD522320D99E7F" X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0.2 (smtp.infracaninophile.co.uk [IPv6:::1]); Sun, 28 May 2006 18:26:53 +0100 (BST) X-Virus-Scanned: ClamAV 0.88.2/1493/Sun May 28 16:29:31 2006 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,NO_RELAYS autolearn=ham version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on happy-idiot-talk.infracaninophile.co.uk Cc: questions@freebsd.org Subject: Re: phpMyAdmin problem - no Edit/Delete on Browse X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:27:05 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig08A1C687B4DD522320D99E7F Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Ian Smith wrote: > On Sun, 28 May 2006, Matthew Seaman wrote: >=20 > > Ian Smith wrote: > > > running 5.4-RELEASE and installed phpMyAdmin 2.6.1.3 with pkg_add = -r > [..] You would be well advised to upgrade to the latest phpMyAdmin, which is version 2.8.1, and is in the current ports. There are a number of securit= y problems that affect many earlier versions. If you look at the list of security announcements at http://www.phpmyadmin.net/home_page/security.ph= p then with version 2.6.1pl3 you're potentially vulnerable to anything anno= unced after PMASA-2005-1 =20 > Think I'll start again with the installed config. I really can't recal= l > if this problem was there since installation, but as mentioned all othe= r > import/export, create/drop/copy database/table, adding rows etc all jus= t > works well so far, excepting edit/delete availability on browse.=20 I have a vague memory that I've seen something like this mentioned as a bugfix in the release notes for phpMyAdmin, but I can't put my finger on exactly where. You can see the release notes for most phpMyAdmin version= s here: https://sourceforge.net/project/showfiles.php?group_id=3D23067&package_id= =3D16462 but the formatting is all wrong before the 2.8.x series. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW --------------enig08A1C687B4DD522320D99E7F Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEed1d8Mjk52CukIwRAzAGAJ4+850a6mB3RqMCo9z1j3tOsz9IaQCfYpc9 X7GVxb2zeMFJAHAAvNhw4FE= =5qei -----END PGP SIGNATURE----- --------------enig08A1C687B4DD522320D99E7F-- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:37:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F1C5716BD77 for ; Sun, 28 May 2006 17:37:58 +0000 (UTC) (envelope-from tom@tomstroubleshooting.com) Received: from mta11.adelphia.net (mta11.adelphia.net [68.168.78.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6033943D58 for ; Sun, 28 May 2006 17:37:58 +0000 (GMT) (envelope-from tom@tomstroubleshooting.com) Received: from zeus ([68.235.136.100]) by mta11.adelphia.net (InterMail vM.6.01.05.02 201-2131-123-102-20050715) with ESMTP id <20060528173757.DZQI9009.mta11.adelphia.net@zeus> for ; Sun, 28 May 2006 13:37:57 -0400 From: "Tom Moore" To: Date: Sun, 28 May 2006 13:37:55 -0400 Message-ID: <000f01c6827d$77102ef0$040fa8c0@zeus> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaCfWi4yX+d/SZuS+i/sqNHZ7KAGw== X-Relayed-By: GPGrelay Version 0.959 (Win32) Subject: Compiling samba3 port on 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:37:59 -0000 Hi guys. I'm trying to build the samba3 port and this is what I get after I select the options I want in the config screen that asks if I want active directory support, ldap support, etc. Broken IPC and code. Anybody know what this means? Tom -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.7.2/349 - Release Date: 5/26/2006 From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:44:45 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 003D916A7E8 for ; Sun, 28 May 2006 17:44:44 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.172]) by mx1.FreeBSD.org (Postfix) with ESMTP id D5B1043D48 for ; Sun, 28 May 2006 17:44:43 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so137084uge for ; Sun, 28 May 2006 10:44:42 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=l9rKy+dxQPZHho+popIk2eBnKbWBW87OACtAQ/+IU3gVkAEaeNeK/oOvOGi9QtJip0F+f5ho6DRMgZmgQXcrj7t5qc3dhmT/XQmtpbfGKyNcx4wjF/moyxKT8aZ0wrFtG4OMsPYhSbktprbl1Sx22T1l48gIqtjLP34TcdySBxs= Received: by 10.78.58.11 with SMTP id g11mr216710hua; Sun, 28 May 2006 10:44:42 -0700 (PDT) Received: by 10.78.16.16 with HTTP; Sun, 28 May 2006 10:44:42 -0700 (PDT) Message-ID: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> Date: Sun, 28 May 2006 20:44:42 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: MIME-Version: 1.0 References: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:44:45 -0000 I am not aware of this feature.. On 5/28/06, Nikolas Britton wrote: > > Does FreeBSD / UFS2 offer on the fly disk compression like windows NTFS > does? > > > > -- > BSD Podcasts @: > http://bsdtalk.blogspot.com/ > http://freebsdforall.blogspot.com/ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sun May 28 17:58:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 16D0516A875 for ; Sun, 28 May 2006 17:58:24 +0000 (UTC) (envelope-from admin@inlusion.net) Received: from freedom.ehost-box.com (freedom.ehost-box.com [216.127.82.82]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2E4B43D4C for ; Sun, 28 May 2006 17:58:23 +0000 (GMT) (envelope-from admin@inlusion.net) Received: from 212-200-208-190.smin.sezampro.yu ([212.200.208.190]) by freedom.ehost-box.com with esmtpa (Exim 4.52) id 1FkPWt-0007xe-5C for freebsd-questions@freebsd.org; Sun, 28 May 2006 19:58:19 +0200 Message-ID: <4479E460.4000803@inlusion.net> Date: Sun, 28 May 2006 19:56:48 +0200 From: Petar Petrovic User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - freedom.ehost-box.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - inlusion.net X-Source: X-Source-Args: X-Source-Dir: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Problem with starting the installation X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 17:58:24 -0000 I've got the following problem: I have a hard drive where I intend to install FreeBSD set up as a primary master, and one CD/DVD drive set up as a secondary master. When I start the FreeBSD (version 6.0) installation, I choose standard installation, install Boot Manager (because I have Windows XP on another partition), set up partitions and when I choose to start the installation from a CD, I get the following error: Error mounting /dev/acd0 on /dist: Input/output error (5) What is the problem and how can I solve it? From owner-freebsd-questions@FreeBSD.ORG Sun May 28 18:02:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9725A16C1F1 for ; Sun, 28 May 2006 18:02:52 +0000 (UTC) (envelope-from aaronvan@comcast.net) Received: from sccrmhc13.comcast.net (sccrmhc13.comcast.net [63.240.77.83]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3C5FA43D4C for ; Sun, 28 May 2006 18:02:51 +0000 (GMT) (envelope-from aaronvan@comcast.net) Received: from [192.168.1.100] (c-67-180-170-102.hsd1.ca.comcast.net[67.180.170.102]) by comcast.net (sccrmhc13) with SMTP id <20060528180251013007v4abe>; Sun, 28 May 2006 18:02:51 +0000 User-Agent: Microsoft-Entourage/11.2.3.060209 Date: Sun, 28 May 2006 10:59:05 -0700 From: Aaron VanAlstine To: "freebsd-questions@freebsd.org" Message-ID: Thread-Topic: Why won't FreeBSD boot from hard drive?? Thread-Index: AcaCgGippvopru5zEdqjywAFAmHJOg== Mime-version: 1.0 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Subject: Why won't FreeBSD boot from hard drive?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 18:02:53 -0000 I successfully loaded FreeBSD 6.0 from CD all the way until the system reboots; however, the computer seems regard the DVD/CD as the boot hard drive and is trying to boot from that. During boot-up it auto detects the DVD ROM as the Pri Master, and the two HDs as 3rd and 4th Master. When it gets to the boot-stage, I get a message =B3Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key.=B2 According to the BIOS setup utility, the 1st boot device is Intel Striped RAID. Yet, when I restart and hit F8 to select the BBS popup menu, it appears that the DVD is still the boot device. I change it to the HD and re-boot and still I get the original =B3Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key" message. The DVD/CD cable is connected to the blue primary IDE on the motherboard an= d the two HD are connected to SATA1 and SATA2. From the Main screen of the BIOS setup utility: -- Primary IDE Master is the NEC DVD RW. -- Primary IDE Slave Not Detected, -- IDE Configuration is RAID (OnBoard Serial-ATA BOOTROM is Disabled.) Any ideas on how I can make the system boot from the hard drive instead of trying the DVD/CD? My hardware consists of: ASUS P5LD2 ACPI Bios Revision 0901 motherboard Pentium D 820 2.8 GHz dual-core NEC ND-3550A DVD+/-RW 2 x 512 Corsair 667 DDR2 RAM 2 x 80G Western Digital SATA HD configured in RAID 0 ASUS EN6600 graphics card Antec case Targus keyboard Belkin 3-button optical mouse Thanks! -- Aaron VanAlstine From owner-freebsd-questions@FreeBSD.ORG Sun May 28 18:15:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 63F6516AA78 for ; Sun, 28 May 2006 18:15:19 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id A5D3043D48 for ; Sun, 28 May 2006 18:15:18 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so397289nzf for ; Sun, 28 May 2006 11:15:18 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=XsP4rnFqCkeXvLuFXn+RdxXCxodo9cVIV77bTQx+IOHtKKOAN7YNe/VnAaZuYQ61UXVrnSyB9+AK1ydHGzdviIzJzVfoLihOcVctmHnehikhNouY5beeWxn91IMboLo8pDDde9FpAwey5LOcbosDw9gXPTqlYZSDZupAybRsOV8= Received: by 10.36.250.54 with SMTP id x54mr2045697nzh; Sun, 28 May 2006 11:15:18 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 11:15:17 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 13:15:17 -0500 From: "Nikolas Britton" To: "Iantcho Vassilev" In-Reply-To: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> Cc: FreeBSD Mailing List Subject: Re: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 18:15:19 -0000 On 5/28/06, Iantcho Vassilev wrote: > I am not aware of this feature.. > That's what I thought... What compression methods are there for *NIX? I need to backup about 1.33TB of data to a 1TB array. > > On 5/28/06, Nikolas Britton wrote: > > > > Does FreeBSD / UFS2 offer on the fly disk compression like windows NTFS > > does? > > From owner-freebsd-questions@FreeBSD.ORG Sun May 28 18:20:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 98F6216B163 for ; Sun, 28 May 2006 18:20:11 +0000 (UTC) (envelope-from dimitar.vassilev@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.186]) by mx1.FreeBSD.org (Postfix) with ESMTP id E9DC043D53 for ; Sun, 28 May 2006 18:20:10 +0000 (GMT) (envelope-from dimitar.vassilev@gmail.com) Received: by nf-out-0910.google.com with SMTP id y38so90704nfb for ; Sun, 28 May 2006 11:20:09 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=oj2S6ATUasH5GKkTZMTjM8IUIJX9fDRrcBuWMP4bhkNokUXWNN9CD4n2us1HMyGI+0r5sZ/fn0xXC6m2O+PqhE+5paMKgfKYkqFfGhAljaAZ4Bemn/MD73qh9LJ7f8ToTKwtFGoC/u0lJq9xFJtxlyzZC+xJUDsdg5CYs52MO0Q= Received: by 10.49.10.6 with SMTP id n6mr1124456nfi; Sun, 28 May 2006 10:53:57 -0700 (PDT) Received: by 10.49.10.13 with HTTP; Sun, 28 May 2006 10:53:56 -0700 (PDT) Message-ID: <59adc1a0605281053y490728cei@mail.gmail.com> Date: Sun, 28 May 2006 19:53:57 +0200 From: "Dimitar Vasilev" To: "freebsd-questions@freebsd.org" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-5; format=flowed Content-Transfer-Encoding: base64 Content-Disposition: inline Subject: access via usb serial adapter X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 18:20:12 -0000 SGkhCkRpZCBhbnlvbmUgaGF2ZSBzdWNjZXNzIGluIGFjY2Vzc2luZyBTdW4gVWx0cmEgd29ya3N0 YXRpb24gKG1pbmUgaXMKdWx0cmE2MCApIHZpYSB1c2Igc2VyaWFsIGFkYXB0ZXIgKFByb2xpZmlj LGV0YykKSSBnZXQgdG8gdGhlIHBvaW50IG9mIHNlZWluZyBkZXZpY2UgZHJpdmVycyBsb2FkaW5n LCBjb25uZWN0aW5nIHdpdGgKOTYwMCBiaXRzLCA4IGJpdCBkYXRhLCAxIHN0b3AgYml0LCBwYXJp dHkgbm9uZSwgYnV0IG5vIHN1Y2Nlc3Mgb2YKbWVzc2FnZSBleGNoYW5nZS4KVGhhbmtzIGluIGFk dmFuY2UhCi0tIAq02NzY4urgILLQ4djb1dIKRGltaXRhciBWYXNzaWxldgoKR251UEcga2V5IElE OiAweDRCOERCNTI1CktleXNlcnZlcjogcGdwLm1pdC5lZHUKS2V5IGZpbmdlcnByaW50OiBEODhB IDNCOTIgREVENSA5MTdFIDM0MUUgRDYyRiA4QzUxIDVGQzQgNEI4RCBCNTI1Cg== From owner-freebsd-questions@FreeBSD.ORG Sun May 28 18:57:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1CC5716A423 for ; Sun, 28 May 2006 18:57:06 +0000 (UTC) (envelope-from rob_27_preston@yahoo.co.uk) Received: from web25010.mail.ukl.yahoo.com (web25010.mail.ukl.yahoo.com [217.12.10.46]) by mx1.FreeBSD.org (Postfix) with SMTP id 5B9AA43D46 for ; Sun, 28 May 2006 18:57:05 +0000 (GMT) (envelope-from rob_27_preston@yahoo.co.uk) Received: (qmail 43389 invoked by uid 60001); 28 May 2006 18:57:04 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=CVFGnlyQh4Bf0r+3o/sFzQr3uaVokeiTSIzzkEkZQ5nA/np9MCxlfSZ4TylFx1+38ZZBf808CAB6p4vMitZbBdWoagP+c9pPm6bhXYTvdqpPXt91ir4wfYSToWUEdLV2m4KcmyqAms+BUnx34/KJpI11GD2HCm8CqRvYH3PhmGM= ; Message-ID: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> Received: from [86.138.94.60] by web25010.mail.ukl.yahoo.com via HTTP; Sun, 28 May 2006 19:57:04 BST Date: Sun, 28 May 2006 19:57:04 +0100 (BST) From: Robert Davison To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 18:57:06 -0000 I've installed sendmail on a 6.1 system. It will send mail internally and externally with no problem. I've now put MailScanner into the mix. I've done what I believe to be the necessary configuration, but am getting the following error in the maillog file.... May 29 20:47:51 luey MailScanner[540]: MailScanner E-Mail Virus Scanner version 4.50.15 starting... May 29 20:47:51 luey MailScanner[540]: Read 701 hostnames from the phishing whitelist May 29 20:47:51 luey MailScanner[540]: Using SpamAssassin results cache May 29 20:47:51 luey MailScanner[540]: Connected to SpamAssassin cache database May 29 20:47:51 luey MailScanner[540]: Enabling SpamAssassin auto-whitelist functionality... May 29 20:47:53 luey MailScanner[540]: ClamAV scanner using unrar command /usr/local/bin/unrar May 29 20:47:53 luey MailScanner[540]: Using locktype = flock May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: from=root, size=37, class=0, nrcpts=1, msgid=<200605291950.k4TJo27K000552@luey.casezero.net>, relay=root@localhost May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: to=rob_27ma, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30037, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1] Can anyone identify from this what is causing the connection to be refused ?? Send instant messages to your online friends http://uk.messenger.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sun May 28 19:21:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5592516B47E for ; Sun, 28 May 2006 19:21:23 +0000 (UTC) (envelope-from hans@lambermont.dyndns.org) Received: from lambermont.dyndns.org (lambermont.dyndns.org [82.93.47.245]) by mx1.FreeBSD.org (Postfix) with ESMTP id C4F2C43D4C for ; Sun, 28 May 2006 19:21:22 +0000 (GMT) (envelope-from hans@lambermont.dyndns.org) Received: by lambermont.dyndns.org (Postfix, from userid 1001) id 5B7E322DE03; Sun, 28 May 2006 21:21:21 +0200 (CEST) Date: Sun, 28 May 2006 21:21:21 +0200 To: freebsd-questions@freebsd.org Message-ID: <20060528192121.GE50477@leia.lambermont.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.1i From: hans@lambermont.dyndns.org (Hans Lambermont) Subject: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 19:21:31 -0000 What is the maximum file size on a dvd+r ? System : 5.4-RELEASE-p6 Command used : growisofs -Z /dev/cd0 -l -J -r burn/ In burn/ I have a backup file of size 4166629386 bytes and some smaller files. In total 4577410 kB. growisofs ends normally : 99.88% done, estimate finish Fri May 26 23:22:48 2006 Total translation table size: 0 Total rockridge attributes bytes: 519 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used d724 2287734 extents written (4468 MB) builtin_dd: 2287744*2KB out @ average 2.4x1385KBps /dev/pass0: flushing cache /dev/pass0: closing track /dev/pass0: closing session # echo $? 0 An 'ls -la' of the mounted dvd+r shows : ls: backup.bz2: Value too large to be stored in data type I can read the whole dvd without problems on a non-FreeBSD system. I cannot find a limit in GROWISOFS(1m) or MKISOFS(8), but on http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2005-12/msg01736.html I read about a 2 GB maximum filesize for a file on a dvd. Is this true ? If so I think it should be mentioned in GROWISOFS(1m). regards, Hans Lambermont From owner-freebsd-questions@FreeBSD.ORG Sun May 28 19:45:10 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C07B016AD96 for ; Sun, 28 May 2006 19:45:10 +0000 (UTC) (envelope-from jonc@chen.org.nz) Received: from drone3.qsi.net.nz (drone3-svc-skyt.qsi.net.nz [202.89.128.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 13C3943D4C for ; Sun, 28 May 2006 19:45:09 +0000 (GMT) (envelope-from jonc@chen.org.nz) Received: (qmail 24920 invoked by uid 0); 28 May 2006 19:45:07 -0000 Received: from unknown (HELO chen.org.nz) ([202.89.146.5]) (envelope-sender ) by 0 (qmail-ldap-1.03) with SMTP for ; 28 May 2006 19:45:07 -0000 Received: by chen.org.nz (Postfix, from userid 1000) id D894E56435; Mon, 29 May 2006 07:45:06 +1200 (NZST) Date: Mon, 29 May 2006 07:45:06 +1200 From: Jonathan Chen To: Nikolas Britton Message-ID: <20060528194506.GB26614@osiris.chen.org.nz> References: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.4.2.1i Cc: FreeBSD Mailing List Subject: Re: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 19:45:13 -0000 On Sun, May 28, 2006 at 01:15:17PM -0500, Nikolas Britton wrote: > On 5/28/06, Iantcho Vassilev wrote: > >I am not aware of this feature.. > > > > That's what I thought... What compression methods are there for *NIX? > I need to backup about 1.33TB of data to a 1TB array. You can always try tar+gzip or tar+bzip2. -- Jonathan Chen ---------------------------------------------------------------------- "You can get farther with a kind word and a gun than you can with a kind word alone" - Al Capone From owner-freebsd-questions@FreeBSD.ORG Sun May 28 19:55:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C4FFA16BE17 for ; Sun, 28 May 2006 19:55:59 +0000 (UTC) (envelope-from peo@intersonic.se) Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.8.98]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9908C43D60 for ; Sun, 28 May 2006 19:55:57 +0000 (GMT) (envelope-from peo@intersonic.se) Received: from localhost (terrapin.inter-sonic.com [172.16.1.12]) by neonpark.inter-sonic.com (Postfix) with ESMTP id 680FE818E5B; Sun, 28 May 2006 21:55:56 +0200 (CEST) Message-ID: <447A0048.4040908@intersonic.se> Date: Sun, 28 May 2006 21:55:52 +0200 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Thunderbird 1.5.0.2 (X11/20060430) MIME-Version: 1.0 To: Robert Davison References: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> In-Reply-To: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 19:56:10 -0000 Robert Davison wrote: > I've installed sendmail on a 6.1 system. It will send mail internally and externally with no problem. I've now put MailScanner into the mix. I've done what I believe to be the necessary configuration, but am getting the following error in the maillog file.... > > May 29 20:47:51 luey MailScanner[540]: MailScanner E-Mail Virus Scanner version 4.50.15 starting... > May 29 20:47:51 luey MailScanner[540]: Read 701 hostnames from the phishing whitelist > May 29 20:47:51 luey MailScanner[540]: Using SpamAssassin results cache > May 29 20:47:51 luey MailScanner[540]: Connected to SpamAssassin cache database > May 29 20:47:51 luey MailScanner[540]: Enabling SpamAssassin auto-whitelist functionality... > May 29 20:47:53 luey MailScanner[540]: ClamAV scanner using unrar command /usr/local/bin/unrar > May 29 20:47:53 luey MailScanner[540]: Using locktype = flock > May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: from=root, size=37, class=0, nrcpts=1, msgid=<200605291950.k4TJo27K000552@luey.casezero.net>, relay=root@localhost > May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: to=rob_27ma, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30037, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1] > > Can anyone identify from this what is causing the connection to be refused ?? MailScanner config? What tcp port is it supposed to listen to? Is sendmail configured to relay to that port? Can you telnet to it ok? From owner-freebsd-questions@FreeBSD.ORG Sun May 28 19:58:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5C03216B79A for ; Sun, 28 May 2006 19:58:26 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9100443D73 for ; Sun, 28 May 2006 19:57:50 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4SJvdv1017110; Sun, 28 May 2006 14:57:40 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447A00AC.7020109@daleco.biz> Date: Sun, 28 May 2006 14:57:32 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Aaron VanAlstine References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Cc: "freebsd-questions@freebsd.org" Subject: Re: Why won't FreeBSD boot from hard drive?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 19:58:26 -0000 Aaron VanAlstine wrote: > I successfully loaded FreeBSD 6.0 from CD all the way until the system > reboots; however, the computer seems regard the DVD/CD as the boot hard > drive and is trying to boot from that. During boot-up it auto detects the > DVD ROM as the Pri Master, and the two HDs as 3rd and 4th Master. When it > gets to the boot-stage, I get a message ³Reboot and Select proper Boot > device or Insert Boot Media in selected Boot device and press a key.² > According to the BIOS setup utility, the 1st boot device is Intel Striped > RAID. Yet, when I restart and hit F8 to select the BBS popup menu, it > appears that the DVD is still the boot device. I change it to the HD and > re-boot and still I get the original ³Reboot and Select proper Boot device > or Insert Boot Media in selected Boot device and press a key" message. > > The DVD/CD cable is connected to the blue primary IDE on the motherboard and > the two HD are connected to SATA1 and SATA2. From the Main screen of the > BIOS setup utility: > > -- Primary IDE Master is the NEC DVD RW. > -- Primary IDE Slave Not Detected, > -- IDE Configuration is RAID (OnBoard Serial-ATA BOOTROM is Disabled.) > > Any ideas on how I can make the system boot from the hard drive instead of > trying the DVD/CD? > I assume that you've noted the existence of a "Boot from RAID" or similar option, and told the BIOS **not** to boot from CD/DVD? > My hardware consists of: > > ASUS P5LD2 ACPI Bios Revision 0901 motherboard Which SATA controller chip on this board? The reason I ask --- and this was on a Windows server, but would apply either way: I had a server doing something very similar --- install from CD, then can't find its array with both hands. Someone I read on the 'net* has a theory --- possibly confirmed, that the next generation SATA drives take so long to spin up in some cases that the motherboard's BIOS times out waiting on them. He claims this to be the case with Seagate and Maxtor SATA-II drives (especially those with "Native Command Queueing" or similar technology). The board in question was an Epox board with the NVidia NForce 4 SATA RAID controller. Since this board also had a Silicon Image RAID contoller, we tried that and had some success. Since we still wanted to use the "primary" SATA controller, we contacted our HDD manufacturer and received firmware updates for the drives. After this, they've been quite reliably booting for a few days now. Kevin Kinsey * Try googling first. IIRC, forum posts on several forums, nick might have been "RobertP" or some such... From owner-freebsd-questions@FreeBSD.ORG Sun May 28 20:01:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AEDD616C89B for ; Sun, 28 May 2006 20:01:36 +0000 (UTC) (envelope-from rob_27_preston@yahoo.co.uk) Received: from web25009.mail.ukl.yahoo.com (web25009.mail.ukl.yahoo.com [217.12.10.45]) by mx1.FreeBSD.org (Postfix) with SMTP id 8C71243D55 for ; Sun, 28 May 2006 20:01:18 +0000 (GMT) (envelope-from rob_27_preston@yahoo.co.uk) Received: (qmail 74885 invoked by uid 60001); 28 May 2006 20:01:17 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Message-ID:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=LHw1Pqvv+8rnIMXpfsUdsS/H6X1nytM3g5xp853o3WFyTAdaUQWi9OQk2XApEJtxoN1GC9kKQevYroszQtmbNVBLRmFcvxFwNFfF4CeQd+czXfNFWDF2e0dVDQjHQINN1eK0j54hQmLvDOM1+OgfvBO95b3IdoDaAbtiEdTgg5E= ; Message-ID: <20060528200117.74883.qmail@web25009.mail.ukl.yahoo.com> Received: from [86.138.94.60] by web25009.mail.ukl.yahoo.com via HTTP; Sun, 28 May 2006 21:01:17 BST Date: Sun, 28 May 2006 21:01:17 +0100 (BST) From: Robert Davison To: Per olof Ljungmark In-Reply-To: <447A0048.4040908@intersonic.se> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 20:01:39 -0000 Excuse my ignorance, i'm new to this. I'm taking it that you mean telnet 83.67.*.* 25 if so then no, I cant connect. How do I find what port MailScanner is listening on ? Per olof Ljungmark wrote: Robert Davison wrote: > I've installed sendmail on a 6.1 system. It will send mail internally and externally with no problem. I've now put MailScanner into the mix. I've done what I believe to be the necessary configuration, but am getting the following error in the maillog file.... > > May 29 20:47:51 luey MailScanner[540]: MailScanner E-Mail Virus Scanner version 4.50.15 starting... > May 29 20:47:51 luey MailScanner[540]: Read 701 hostnames from the phishing whitelist > May 29 20:47:51 luey MailScanner[540]: Using SpamAssassin results cache > May 29 20:47:51 luey MailScanner[540]: Connected to SpamAssassin cache database > May 29 20:47:51 luey MailScanner[540]: Enabling SpamAssassin auto-whitelist functionality... > May 29 20:47:53 luey MailScanner[540]: ClamAV scanner using unrar command /usr/local/bin/unrar > May 29 20:47:53 luey MailScanner[540]: Using locktype = flock > May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: from=root, size=37, class=0, nrcpts=1, msgid=<200605291950.k4TJo27K000552@luey.casezero.net>, relay=root@localhost > May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: to=rob_27ma, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30037, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1] > > Can anyone identify from this what is causing the connection to be refused ?? MailScanner config? What tcp port is it supposed to listen to? Is sendmail configured to relay to that port? Can you telnet to it ok? --------------------------------- All New Yahoo! Mail – Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 20:06:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C5C9016C937 for ; Sun, 28 May 2006 20:06:48 +0000 (UTC) (envelope-from peo@intersonic.se) Received: from neonpark.inter-sonic.com (neonpark.inter-sonic.com [212.247.8.98]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2A27543D69 for ; Sun, 28 May 2006 20:06:39 +0000 (GMT) (envelope-from peo@intersonic.se) Received: from localhost (terrapin.inter-sonic.com [172.16.1.12]) by neonpark.inter-sonic.com (Postfix) with ESMTP id A2DEA818E5B; Sun, 28 May 2006 22:06:38 +0200 (CEST) Message-ID: <447A02CA.2020803@intersonic.se> Date: Sun, 28 May 2006 22:06:34 +0200 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Thunderbird 1.5.0.2 (X11/20060430) MIME-Version: 1.0 To: Per olof Ljungmark References: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> <447A0048.4040908@intersonic.se> In-Reply-To: <447A0048.4040908@intersonic.se> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Robert Davison , freebsd-questions@freebsd.org Subject: Re: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 20:06:57 -0000 Per olof Ljungmark wrote: > Robert Davison wrote: >> I've installed sendmail on a 6.1 system. It will send mail internally >> and externally with no problem. I've now put MailScanner into the mix. >> I've done what I believe to be the necessary configuration, but am >> getting the following error in the maillog file.... >> May 29 20:47:51 luey MailScanner[540]: MailScanner E-Mail Virus >> Scanner version 4.50.15 starting... >> May 29 20:47:51 luey MailScanner[540]: Read 701 hostnames from the >> phishing whitelist >> May 29 20:47:51 luey MailScanner[540]: Using SpamAssassin results cache >> May 29 20:47:51 luey MailScanner[540]: Connected to SpamAssassin cache >> database >> May 29 20:47:51 luey MailScanner[540]: Enabling SpamAssassin >> auto-whitelist functionality... >> May 29 20:47:53 luey MailScanner[540]: ClamAV scanner using unrar >> command /usr/local/bin/unrar >> May 29 20:47:53 luey MailScanner[540]: Using locktype = flock >> May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: from=root, >> size=37, class=0, nrcpts=1, >> msgid=<200605291950.k4TJo27K000552@luey.casezero.net>, >> relay=root@localhost >> May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: to=rob_27ma, >> ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, >> pri=30037, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: >> Connection refused by [127.0.0.1] >> >> Can anyone identify from this what is causing the connection to be >> refused ?? > > MailScanner config? What tcp port is it supposed to listen to? Is > sendmail configured to relay to that port? Can you telnet to it ok? Hmm, it does not look like MailScanner uses tcp at all, rather looks directly at queued spool files. If that is the case it could be a permissions problem for the sendmail spool directory for instance. Sorry for the waste of bandwidth... From owner-freebsd-questions@FreeBSD.ORG Sun May 28 20:45:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3BC2016C769 for ; Sun, 28 May 2006 20:37:49 +0000 (UTC) (envelope-from rob_27_preston@yahoo.co.uk) Received: from web25007.mail.ukl.yahoo.com (web25007.mail.ukl.yahoo.com [217.12.10.43]) by mx1.FreeBSD.org (Postfix) with SMTP id 4FA9843D64 for ; Sun, 28 May 2006 20:37:47 +0000 (GMT) (envelope-from rob_27_preston@yahoo.co.uk) Received: (qmail 85397 invoked by uid 60001); 28 May 2006 20:37:46 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=i7PcpaAl7cTqutLWh4g6l/i5Bwn7ubgleuuWzAfdjtJEEgGrj9Y9JoLjxeC7n55kd9j/Plsvn40UbqxU30G/SF2HzI0xcA4Mm4/UArgZHClZZQg7Ch8R72vPAfcJ50VhNMf3/5Ur1Dqu0BChcx5Y2+uP1e059pCigGKh4tFdjn4= ; Message-ID: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> Received: from [86.138.94.60] by web25007.mail.ukl.yahoo.com via HTTP; Sun, 28 May 2006 21:37:46 BST Date: Sun, 28 May 2006 21:37:46 +0100 (BST) From: Robert Davison To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 20:45:25 -0000 I've done a bit more digging. It seems that my sendmail_in.pid and sendmail_out.pid files are not running in /var/run, despite having this in my rc.conf.. sendmail_enable="NONE" clamd_enable="YES" freshd_enable="YES" mailscanner_enable="YES" mta_enable="YES" mta_type="sendmail" mta_profiles="incoming outgoing submitqueue" mta_incoming_flags="-L sm-mta-in -bd -OPrivacyOptions=noetrn -OQueueDirectory=/v ar/spool/mqueue.in -ODeliveryMode=queueonly" mta_incoming_pidfile="/var/run/sendmail_in.pid" mta_incoming_configfile="/etc/mail/sendmail.cf" mta_outgoing_flags="-L sm-mta-out -q15m" mta_outgoing_pidfile="/var/run/sendmail_out.pid" mta_outgoing_configfile="/etc/mail/sendmail.cf" mta_submitqueue_flags="-L ms-msp-queue -Ac -q15m" mta_submitqueue_pidfile="/var/spool/clientmqueue/sm-client.pid" mta_submitqueue_configfile="/etc/mail/submit.cf" I'm getting a sendmail.pid file, but nothing more --------------------------------- Try the all-new Yahoo! Mail . "The New Version is radically easier to use" – The Wall Street Journal From owner-freebsd-questions@FreeBSD.ORG Sun May 28 20:46:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 557B216CF80 for ; Sun, 28 May 2006 20:40:04 +0000 (UTC) (envelope-from axp@shacknet.at) Received: from taro.utanet.at (taro.utanet.at [213.90.36.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8D10743D53 for ; Sun, 28 May 2006 20:40:02 +0000 (GMT) (envelope-from axp@shacknet.at) Received: from andrea.utanet.at ([213.90.36.55]) by taro.utanet.at with esmtp (Exim 4.60) (envelope-from ) id 1FkS3N-000106-BC for freebsd-questions@freebsd.org; Sun, 28 May 2006 22:40:01 +0200 Received: from simmu1-67-133.utaonline.at ([62.218.67.133] helo=localhost) by andrea.utanet.at with esmtp (Exim 4.50) id 1FkS3N-0001rf-5r for freebsd-questions@freebsd.org; Sun, 28 May 2006 22:40:01 +0200 Date: Sun, 28 May 2006 22:40:00 +0200 From: "Ferdinand Haselbacher (jr.)" To: freebsd-questions@freebsd.org Message-ID: <20060528204000.GA4341@Hellrazor.bigfatflat> References: <00d601c68254$b814c330$6501a8c0@grant> <1148822083.95778.100.camel@chaucer.jeays.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1148822083.95778.100.camel@chaucer.jeays.ca> X-Accept-Language: en,de X-OS: Linux Hellrazor 2.6.16-rc5hellrazor i686 X-Editor: Vim http://www.vim.org X-GPG-Key: 0xAD85CEE1 User-Agent: mutt-ng/devel-r804 (Debian) Subject: Re: 2>&1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 20:46:48 -0000 On Sun, May 28, 2006 at 09:14:43AM -0400, Mike Jeays wrote: > On Sun, 2006-05-28 at 08:46 -0400, Grant Peel wrote: > > Hi all, > > > > When using cron, I understand the >/dev/null thing OK, but what exactly does > > >2&1 do? Is it usefull anywhere else? Where might one find ducumentation on > > it? > > > > -Grant > > > > > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > It directs both stdout and stderr to /dev/null. Look in 'man bash', or > any tutorial on bash for a more detailed description. Quite confusing > syntax, and a hard-to-remember incantation, IMHO. the trick of the "&" is that the fd (filediscriptor) is kept open and if you redirect fd 1 to a file and fd 2 to file it would get overwritten! one last word to Bash: bash seems to be nice, it is indeed, but for real good and compatible scripting i would recommend you to use plain sh. so far, Ferdinand Haselbacher From owner-freebsd-questions@FreeBSD.ORG Sun May 28 20:53:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 38D9B16C580 for ; Sun, 28 May 2006 20:42:47 +0000 (UTC) (envelope-from freebsd@troback.com) Received: from devil.troback.com (c-195-216-040-156.cust.thalamus.net [195.216.40.156]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9C57543D70 for ; Sun, 28 May 2006 20:42:39 +0000 (GMT) (envelope-from freebsd@troback.com) Received: from devil.troback.com (localhost.troback.com [127.0.0.1]) by devil.troback.com (Postfix) with ESMTP id 41EEB114B0 for ; Sun, 28 May 2006 22:42:38 +0200 (CEST) Date: Sun, 28 May 2006 22:42:37 +0200 From: Anders Troback To: freebsd-questions@freebsd.org Message-ID: <20060528224237.3c38da44@devil.troback.com> In-Reply-To: <200605281626.06877.aren.tyr@gawab.com> References: <20060522230755.3ec1b02e@devil.troback.com> <200605281626.06877.aren.tyr@gawab.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Subject: Re: Missing devs... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 20:54:00 -0000 On Sun, 28 May 2006 16:25:58 +0100 Aren Olvalde Tyr wrote: > Hi > > So now to my question! How do I avoid this dual mounting? >=20 > I have the same problem with my memory card reader.=20 >=20 > The necessary da1s1 device node slice for my SD memory card is not > created until after it has been probed during the attempt to mount > it. The only exception to this is if the card is already inserted > when the system first boots up. >=20 > Presumably there must be a way to automatically probe the USB > device/card and create the slice so you can mount it when it is first > inserted? >=20 > I am wondering if /etc/usbd.conf would be of assistance here. Can you > get the usbd daemon to automatically "probe" a device for filesystem > slices during the "attach" stage? >=20 > Aren. Hi, I have been using usbd.conf for a workaround. Maybe clumsy but it works for me! In my usbd.conf I have: device "Sony Ericsson W810i" devname "umass[0-9]+" vendor 0x0fce product 0xe042 attach "sleep 5 ; /sbin/mount -t msdos /dev/da1 /mnt ; /etc/rc.d/devfs r= estart" As I said, this works for me but it seams to be a bit stupid that this kind of workaround is needed... Thanks for listening!!! \\troback --=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D How many Microsoft employees does it take to screw in a light bulb? None, they declare darkness a new standard. ---------------------------------------------------------------- Anders Trob=E4ck http://www.troback.com/ - From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:02:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7D9C416C81D for ; Sun, 28 May 2006 20:51:08 +0000 (UTC) (envelope-from hans@lambermont.dyndns.org) Received: from lambermont.dyndns.org (lambermont.dyndns.org [82.93.47.245]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0C36643D46 for ; Sun, 28 May 2006 20:51:07 +0000 (GMT) (envelope-from hans@lambermont.dyndns.org) Received: by lambermont.dyndns.org (Postfix, from userid 1001) id 30C8922DE03; Sun, 28 May 2006 22:51:07 +0200 (CEST) Date: Sun, 28 May 2006 22:51:07 +0200 To: yattaran Message-ID: <20060528205107.GF50477@leia.lambermont.dyndns.org> References: <20060528192121.GE50477@leia.lambermont.dyndns.org> <4479FF59.7030902@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4479FF59.7030902@gmail.com> User-Agent: Mutt/1.4.2.1i From: hans@lambermont.dyndns.org (Hans Lambermont) Cc: freebsd-questions@freebsd.org Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:02:37 -0000 yattaran wrote: > Hans Lambermont wrote: >> What is the maximum file size on a dvd+r ? > > Here's a list of sites I have bookmarked about DVD sizes: Hi Yattaran, I'm not looking into the size of a DVD disc, I'm looking into the size limits of a *file* on the DVD. Sorry for the confusion. I can write a file of 4166629386 bytes to the dvd+r just fine, but cannot read it afterwards : ls: backup.bz2: Value too large to be stored in data type The dvddemystified website has an interesting pointer on it in the 'note section of chapter 3.3' : "FAT16 also has a 2 gigabyte file size limit" Could this be related ? regards, Hans Lambermont From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:03:58 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CAA3216CCEB for ; Sun, 28 May 2006 20:52:18 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from hu-out-0102.google.com (hu-out-0102.google.com [72.14.214.207]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0C19643D4C for ; Sun, 28 May 2006 20:52:16 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by hu-out-0102.google.com with SMTP id 28so363692hug for ; Sun, 28 May 2006 13:52:15 -0700 (PDT) Received: by 10.54.80.16 with SMTP id d16mr668344wrb; Sun, 28 May 2006 12:50:35 -0700 (PDT) Received: from scorpio ( [216.45.217.148]) by mx.gmail.com with ESMTP id 65sm2152104wra.2006.05.28.12.52.14; Sun, 28 May 2006 12:52:15 -0700 (PDT) Date: Sun, 28 May 2006 15:52:02 -0400 (EDT) From: "Gerard E. Seibert" To: FreeBSD-Questions Message-ID: <20060528154547.C1474@seibercom.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: Error Message Upon Boot-up X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: "Gerard E. Seibert" List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:04:04 -0000 Using: FreeBSD 6.1 I have suddenly started seeing an error message upon boot-up. This is a snippet of the display when the error message is displayed. Starting mysql. dnetcStarting ddclient. /etc/rc: WARNING: $compat5x_enable is not set properly - see rc.conf(5). Configuring syscons: font8x16 font8x14 font8x8 blanktime screensaversplash: image decoder found: green_saver This just started happening and I cannot figure out why. My entire rc.conf file follows. # -- sysinstall generated deltas -- # Sat May 13 06:54:24 2006 # Created: Sat May 13 06:54:24 2006 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. blanktime="3600" font8x14="iso-8x14" font8x16="iso-8x16" font8x8="iso-8x8" hostname="seibercom.net" ifconfig_rl0="DHCP" inetd_enable="YES" kern_securelevel_enable="NO" linux_enable="YES" lpd_enable="YES" saver="green" sshd_enable="YES" usbd_enable="YES" fetchmail_enable="YES" ddclient_enable="YES" fsck_y_enable="YES" ntpd_enable="YES" clear_tmp_enable="YES" mysql_enable="YES" apache22_enable="YES" dnetc_enable="YES" chkprintcap_enable="YES" samba_enable="YES" clamav_clamd_enable="YES" clamav_freshclam_enable="YES" clamav_milter_enable="YES" clamav_milter_socket="/var/run/clamav/clmilter.sock" clamav_milter_flags="-P -m 50 --quarantine-dir=/var/mail/quarantine -T 0" Since it just started, I am assuming that something got corrupted, but I am only guessing. Perhaps someone can assist me. Thanks! -- Gerard E. Seibert gerard@seibercom.net From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:07:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B3F1716B5DC for ; Sun, 28 May 2006 20:55:45 +0000 (UTC) (envelope-from yattaran@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 214D843D64 for ; Sun, 28 May 2006 20:55:41 +0000 (GMT) (envelope-from yattaran@gmail.com) Received: by nf-out-0910.google.com with SMTP id x30so137412nfb for ; Sun, 28 May 2006 13:55:40 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=bTFAXfGlLs2QprnFaRKtZk3xLnzGiVW8yMPkCcbTPkvoY5Re8BmROm4gMXx3025PR/j2tfows3tCRQ3gkM7gUQ0DPfhDoXGT48Lx0yh3BdSs6vdHs7tSEpkpP/LgQd82ljUld+Ki7BtGuX9S5sFT1fv+I7qXyKn0xQh+aXWim44= Received: by 10.48.221.4 with SMTP id t4mr1186635nfg; Sun, 28 May 2006 12:52:04 -0700 (PDT) Received: from ?193.217.31.148? ( [193.217.31.148]) by mx.gmail.com with ESMTP id p20sm3018629nfc.2006.05.28.12.52.02; Sun, 28 May 2006 12:52:03 -0700 (PDT) Message-ID: <4479FF59.7030902@gmail.com> Date: Sun, 28 May 2006 21:51:53 +0200 From: yattaran User-Agent: Thunderbird 1.5.0.2 (X11/20060425) MIME-Version: 1.0 To: Hans Lambermont References: <20060528192121.GE50477@leia.lambermont.dyndns.org> In-Reply-To: <20060528192121.GE50477@leia.lambermont.dyndns.org> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:07:12 -0000 Hans Lambermont wrote: > What is the maximum file size on a dvd+r ? > Here's a list of sites I have bookmarked about DVD sizes: http://en.wikipedia.org/wiki/DVD+R http://en.wikipedia.org/wiki/DVD-R http://en.wikipedia.org/wiki/DVD http://www.dvddemystified.com/dvdfaq.html#7.2 http://www.dvddemystified.com/dvdfaq.html#3.3 -- yattaran From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:44:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0A74716CFB4 for ; Sun, 28 May 2006 21:30:20 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.200]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3168A43D46 for ; Sun, 28 May 2006 21:30:19 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so415678nzf for ; Sun, 28 May 2006 14:30:18 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=ouUAKDlKqId066WzLzsDdQ+gnSVIFthrr9Gnk9ZRniXido1hTSMBkEqSFSGd9ndlg3fvAtu3qP6+hlPVkcmCqEbbG+AuP2T9yUW2nPdzBNJJelbFlc7+XyQDBGFW5/HiTAqREAXQmjNUQRjEaWE4rD04nCLtef7p/bDBmWEeSlQ= Received: by 10.36.221.50 with SMTP id t50mr2165394nzg; Sun, 28 May 2006 14:30:18 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 14:30:18 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 16:30:18 -0500 From: "Nikolas Britton" To: "Hans Lambermont" In-Reply-To: <20060528192121.GE50477@leia.lambermont.dyndns.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <20060528192121.GE50477@leia.lambermont.dyndns.org> Cc: freebsd-questions@freebsd.org Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:44:39 -0000 On 5/28/06, Hans Lambermont wrote: > What is the maximum file size on a dvd+r ? > > System : 5.4-RELEASE-p6 > Command used : growisofs -Z /dev/cd0 -l -J -r burn/ > In burn/ I have a backup file of size 4166629386 bytes and some smaller > files. In total 4577410 kB. > > growisofs ends normally : > 99.88% done, estimate finish Fri May 26 23:22:48 2006 > Total translation table size: 0 > Total rockridge attributes bytes: 519 > Total directory bytes: 0 > Path table size(bytes): 10 > Max brk space used d724 > 2287734 extents written (4468 MB) > builtin_dd: 2287744*2KB out @ average 2.4x1385KBps > /dev/pass0: flushing cache > /dev/pass0: closing track > /dev/pass0: closing session > # echo $? > 0 > > An 'ls -la' of the mounted dvd+r shows : > ls: backup.bz2: Value too large to be stored in data type > > I can read the whole dvd without problems on a non-FreeBSD system. I > cannot find a limit in GROWISOFS(1m) or MKISOFS(8), but on > http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2005-12/msg0173= 6.html > I read about a 2 GB maximum filesize for a file on a dvd. Is this true ? > If so I think it should be mentioned in GROWISOFS(1m). > FreeBSD's implementation is correct, Linux is the one that's wrong, they decided to embrace and extend the standard. Theirs a 2GB cap per file on DVDs. --=20 BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:51:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2504516CA65 for ; Sun, 28 May 2006 21:42:24 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.200]) by mx1.FreeBSD.org (Postfix) with ESMTP id 88BFB43D72 for ; Sun, 28 May 2006 21:42:15 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so416711nzf for ; Sun, 28 May 2006 14:42:15 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=SODbdGmtfPzyh2xfrrND0E7cDwcIwMV/vqiSLC5Yzjyf5Vkgg+/rpbDiedl8m4gTLkjVKrpHLKWaayI5Ro1DaRmd74XEU2lqQSuHj3MMElJseFmREWpI84Z4Thj1c9o5G0PGRkMiDd6Hk4r6S6O46lHk52vj6iyRxbpcESvVQpA= Received: by 10.36.158.2 with SMTP id g2mr2195179nze; Sun, 28 May 2006 14:42:15 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Sun, 28 May 2006 14:42:15 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 16:42:15 -0500 From: "Nikolas Britton" To: "Hans Lambermont" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <20060528192121.GE50477@leia.lambermont.dyndns.org> Cc: freebsd-questions@freebsd.org Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:51:14 -0000 On 5/28/06, Nikolas Britton wrote: > On 5/28/06, Hans Lambermont wrote: > > What is the maximum file size on a dvd+r ? > > > > System : 5.4-RELEASE-p6 > > Command used : growisofs -Z /dev/cd0 -l -J -r burn/ > > In burn/ I have a backup file of size 4166629386 bytes and some smaller > > files. In total 4577410 kB. > > > > growisofs ends normally : > > 99.88% done, estimate finish Fri May 26 23:22:48 2006 > > Total translation table size: 0 > > Total rockridge attributes bytes: 519 > > Total directory bytes: 0 > > Path table size(bytes): 10 > > Max brk space used d724 > > 2287734 extents written (4468 MB) > > builtin_dd: 2287744*2KB out @ average 2.4x1385KBps > > /dev/pass0: flushing cache > > /dev/pass0: closing track > > /dev/pass0: closing session > > # echo $? > > 0 > > > > An 'ls -la' of the mounted dvd+r shows : > > ls: backup.bz2: Value too large to be stored in data type > > > > I can read the whole dvd without problems on a non-FreeBSD system. I > > cannot find a limit in GROWISOFS(1m) or MKISOFS(8), but on > > http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2005-12/msg01= 736.html > > I read about a 2 GB maximum filesize for a file on a dvd. Is this true = ? > > If so I think it should be mentioned in GROWISOFS(1m). > > > > FreeBSD's implementation is correct, Linux is the one that's wrong, > they decided to embrace and extend the standard. Theirs a 2GB cap per > file on DVDs. More specifically the ISO9660 file system, maybe UDF doesn't have this limit, you should look into it and report back. --=20 BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:54:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A045D16C552 for ; Sun, 28 May 2006 21:46:24 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-satin.atl.sa.earthlink.net (pop-satin.atl.sa.earthlink.net [207.69.195.63]) by mx1.FreeBSD.org (Postfix) with ESMTP id 58B9E43D5C for ; Sun, 28 May 2006 21:46:17 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeble.com) by pop-satin.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1FkT5T-00078y-00; Sun, 28 May 2006 17:46:15 -0400 Date: Sun, 28 May 2006 17:46:48 -0400 From: Randy Pratt To: hans@lambermont.dyndns.org (Hans Lambermont) Message-Id: <20060528174648.b5ed0d48.bsd-unix@earthlink.net> In-Reply-To: <20060528205107.GF50477@leia.lambermont.dyndns.org> References: <20060528192121.GE50477@leia.lambermont.dyndns.org> <4479FF59.7030902@gmail.com> <20060528205107.GF50477@leia.lambermont.dyndns.org> X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.17; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: yattaran@gmail.com, freebsd-questions@freebsd.org Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:54:36 -0000 On Sun, 28 May 2006 22:51:07 +0200 hans@lambermont.dyndns.org (Hans Lambermont) wrote: > yattaran wrote: > > > Hans Lambermont wrote: > >> What is the maximum file size on a dvd+r ? > > > > Here's a list of sites I have bookmarked about DVD sizes: > > Hi Yattaran, > > I'm not looking into the size of a DVD disc, I'm looking into the size > limits of a *file* on the DVD. Sorry for the confusion. > > I can write a file of 4166629386 bytes to the dvd+r just fine, but > cannot read it afterwards : > ls: backup.bz2: Value too large to be stored in data type > > The dvddemystified website has an interesting pointer on it in the 'note > section of chapter 3.3' : "FAT16 also has a 2 gigabyte file size limit" There is a PR about this: ttp://www.freebsd.org/cgi/query-pr.cgi?pr=kern-91488 I have a PVR250 tv capture card and it will easily produce files in excess of 2G. I applied one of the patches mention in the PR locally and can read those large files back to the system (and reapply it after each CVSup since it hasn't been committed). HTH, Randy -- From owner-freebsd-questions@FreeBSD.ORG Sun May 28 21:57:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 746C416AE78 for ; Sun, 28 May 2006 21:48:56 +0000 (UTC) (envelope-from jonc@chen.org.nz) Received: from drone2.qsi.net.nz (drone2-svc-skyt.qsi.net.nz [202.89.128.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id A87CF43D48 for ; Sun, 28 May 2006 21:48:55 +0000 (GMT) (envelope-from jonc@chen.org.nz) Received: (qmail 17589 invoked by uid 0); 28 May 2006 21:48:54 -0000 Received: from unknown (HELO chen.org.nz) ([202.89.146.5]) (envelope-sender ) by 0 (qmail-ldap-1.03) with SMTP for ; 28 May 2006 21:48:52 -0000 Received: by chen.org.nz (Postfix, from userid 1000) id 8387B56436; Mon, 29 May 2006 09:48:51 +1200 (NZST) Date: Mon, 29 May 2006 09:48:51 +1200 From: Jonathan Chen To: "Gerard E. Seibert" Message-ID: <20060528214851.GA36622@osiris.chen.org.nz> References: <20060528154547.C1474@seibercom.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060528154547.C1474@seibercom.net> User-Agent: Mutt/1.4.2.1i Cc: FreeBSD-Questions Subject: Re: Error Message Upon Boot-up X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 21:57:52 -0000 On Sun, May 28, 2006 at 03:52:02PM -0400, Gerard E. Seibert wrote: > Using: FreeBSD 6.1 > > I have suddenly started seeing an error message upon boot-up. This is a > snippet of the display when the error message is displayed. > > Starting mysql. > dnetcStarting ddclient. > /etc/rc: WARNING: $compat5x_enable is not set properly - see rc.conf(5). You need: compat5x_enable="YES" in /etc/rc.conf -- Jonathan Chen ---------------------------------------------------------------------- "Nyuck, nyuck, nyuck" - Curly From owner-freebsd-questions@FreeBSD.ORG Sun May 28 22:04:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7163216CE53 for ; Sun, 28 May 2006 22:00:48 +0000 (UTC) (envelope-from v.velox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8B19843D8F for ; Sun, 28 May 2006 22:00:33 +0000 (GMT) (envelope-from v.velox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id 6E4EF14D9A4; Sun, 28 May 2006 15:00:32 -0700 (PDT) Date: Sun, 28 May 2006 17:01:13 -0500 From: Vulpes Velox To: "Nikolas Britton" Message-ID: <20060528170113.4de3f07d@vixen42.vulpes> In-Reply-To: References: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Iantcho Vassilev , FreeBSD Mailing List Subject: Re: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 22:04:56 -0000 On Sun, 28 May 2006 13:15:17 -0500 "Nikolas Britton" wrote: > On 5/28/06, Iantcho Vassilev wrote: > > I am not aware of this feature.. > > > > That's what I thought... What compression methods are there for > *NIX? I need to backup about 1.33TB of data to a 1TB array. If it is just backing up, tar works nicely. From owner-freebsd-questions@FreeBSD.ORG Sun May 28 22:58:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1A1C016A482 for ; Sun, 28 May 2006 22:48:47 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.228]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3C65C43D46 for ; Sun, 28 May 2006 22:48:46 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wr-out-0506.google.com with SMTP id 71so403525wri for ; Sun, 28 May 2006 15:48:45 -0700 (PDT) Received: by 10.54.101.13 with SMTP id y13mr1581549wrb; Sun, 28 May 2006 15:48:44 -0700 (PDT) Received: from ?192.168.0.4? ( [216.45.217.148]) by mx.gmail.com with ESMTP id 39sm1396670wrl.2006.05.28.15.48.43; Sun, 28 May 2006 15:48:44 -0700 (PDT) Date: Sun, 28 May 2006 18:48:47 -0400 From: Gerard To: Jonathan Chen , FreeBSD-Questions Organization: Seibercom.NET In-Reply-To: <20060528214851.GA36622@osiris.chen.org.nz> References: <20060528154547.C1474@seibercom.net> <20060528214851.GA36622@osiris.chen.org.nz> X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxcR nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q Message-Id: <20060528184438.D33C.GERARD@seibercom.net> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Mailer: Becky! ver. 2.25 [en] Cc: Subject: Re: Error Message Upon Boot-up X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: gerard@seibercom.net List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 22:58:52 -0000 Jonathan Chen > On Sun, May 28, 2006 at 03:52:02PM -0400, Gerard E. Seibert wrote: > > Using: FreeBSD 6.1 > > > > I have suddenly started seeing an error message upon boot-up. This is a > > snippet of the display when the error message is displayed. > > > > Starting mysql. > > dnetcStarting ddclient. > > /etc/rc: WARNING: $compat5x_enable is not set properly - see rc.conf(5). > > You need: > > compat5x_enable="YES" > > in /etc/rc.conf I searched around and figured that out. Now I have a few other questions. 1) How did it suddenly get in my /usr/local/etc/rc.d directory anyway? 2) If it is not specifically enabled or disabled in the rc.conf file, why is it complaining? Other files in ./rc.d do not complain if there is no entry in the rc.conf file. They just do not start. At least that is what I believe happens. 3) Would this be considered a bug of some type? -- Gerard Seibert gerard@seibercom.net "Never underestimate the power of stupid people in large groups." Anonymous From owner-freebsd-questions@FreeBSD.ORG Sun May 28 22:59:18 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B6FF716CCB2 for ; Sun, 28 May 2006 22:50:07 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from typhoon.enabled.com (typhoon.enabled.com [216.218.220.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2E2143D48 for ; Sun, 28 May 2006 22:50:06 +0000 (GMT) (envelope-from admin2@enabled.com) Received: from enabled.com (localhost.enabled.com [127.0.0.1]) by typhoon.enabled.com (8.13.6/8.13.6) with ESMTP id k4SMo5hY012557 for ; Sun, 28 May 2006 15:50:05 -0700 (PDT) (envelope-from admin2@enabled.com) From: "Noah" To: "freebsd-questions" Date: Sun, 28 May 2006 14:50:05 -0800 Message-Id: <20060528224917.M5250@enabled.com> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 24.5.78.100 (admin2) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: difference between mbox and maildir? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 22:59:23 -0000 Hi there, might somebody send me to a website that explains the differnce between mbox and maildir? Or maybe you can just explain the differences in a response. Cheers, Noah From owner-freebsd-questions@FreeBSD.ORG Sun May 28 23:29:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3366A16A61F for ; Sun, 28 May 2006 23:29:55 +0000 (UTC) (envelope-from steinex@nognu.de) Received: from shodan.nognu.de (shodan.nognu.de [85.14.216.230]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8CCB343D53 for ; Sun, 28 May 2006 23:29:54 +0000 (GMT) (envelope-from steinex@nognu.de) Received: by shodan.nognu.de (Postfix, from userid 1002) id 5FDD6B856; Mon, 29 May 2006 01:29:50 +0200 (CEST) Date: Mon, 29 May 2006 01:29:50 +0200 From: Frank Steinborn To: Noah Mail-Followup-To: Noah , freebsd-questions References: <20060528224917.M5250@enabled.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060528224917.M5250@enabled.com> User-Agent: mutt-ng/devel-r804 (FreeBSD) Message-Id: <20060528232950.5FDD6B856@shodan.nognu.de> Cc: freebsd-questions Subject: Re: difference between mbox and maildir? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 May 2006 23:29:59 -0000 Noah wrote: > might somebody send me to a website that explains the differnce between mbox > and maildir? Or maybe you can just explain the differences in a response. http://www.google.com/search?hl=de&q=maildir+mbox&btnG=Google-Suche&meta= From owner-freebsd-questions@FreeBSD.ORG Mon May 29 00:31:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8181C16A441 for ; Mon, 29 May 2006 00:31:39 +0000 (UTC) (envelope-from cscotts@mindspring.com) Received: from relay03.pair.com (relay03.pair.com [209.68.5.17]) by mx1.FreeBSD.org (Postfix) with SMTP id 0842043D46 for ; Mon, 29 May 2006 00:31:38 +0000 (GMT) (envelope-from cscotts@mindspring.com) Received: (qmail 53499 invoked from network); 29 May 2006 00:31:37 -0000 Received: from unknown (HELO ?192.168.1.101?) (unknown) by unknown with SMTP; 29 May 2006 00:31:37 -0000 X-pair-Authenticated: 68.79.15.21 Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: freebsd-questions From: Scott Sipe Date: Sun, 28 May 2006 19:31:36 -0500 X-Mailer: Apple Mail (2.750) Subject: Network Design X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 00:31:39 -0000 I'm helping a small business expand their networking. right now they have one office location (with a freebsd firewall box, and a freebsd box running db, web, samba, etc). Their main office location has: - 3 external static IPs on a DSL connection (all aliased on one nic) - an internal network of 10.0.0.0/255.0.0.0 - a wireless network with IP range 192.168.1.0/255.255.255.0 (nat'ed and running off the firewall box) They are adding a second warehouse location. It will also have one static IP address (running on dsl also). I'd like to get a IPsec connection going between the location so all warehouse traffic goes through the main branch. I've done this much before. They also want to subdivide up the network at their main location so some terminals can be on gige and some are on 100. I believe I've read you shouldn't mix and match 100/1000? I don't really have any experience with how subnetting and IP ranges should work for a configuration like this (local network, remote ipsec location, wireless network, etc). Looking for any assistance (advice, links, anything!) on how to setup a sane and well designed network. Scott From owner-freebsd-questions@FreeBSD.ORG Mon May 29 00:34:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 675C116A61A for ; Mon, 29 May 2006 00:34:36 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 994E943D48 for ; Mon, 29 May 2006 00:34:35 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 21211 invoked by uid 507); 29 May 2006 10:34:34 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 29 May 2006 10:34:34 +1000 Mime-Version: 1.0 (Apple Message framework v623) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; format=flowed To: freebsd-questions@FreeBSD. ORG From: Malcolm Fitzgerald Date: Mon, 29 May 2006 10:34:33 +1000 X-Mailer: Apple Mail (2.623) Cc: Subject: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 00:34:36 -0000 I am running freeBSD v6.0 security on a home network behind an adsl router. I cannot connect to localhost from a browser (apache is running!) I cannot connect to localhost port 22 (KPackage tries to use ssh) What can cause these problems? How can I troubleshoot them? I am very new to freeBSD, so part of my question is "where do I begin?". I have a copy of Complete freeBSD beside me but can't get the magical incantations right. Suggestions appreciated. malcolm From owner-freebsd-questions@FreeBSD.ORG Mon May 29 00:44:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E1F8F16A9A4 for ; Mon, 29 May 2006 00:44:02 +0000 (UTC) (envelope-from anonymous@crowe-shop.com) Received: from crowe-shop.com (crowe-shop.com [199.237.206.146]) by mx1.FreeBSD.org (Postfix) with ESMTP id EC80843D7E for ; Mon, 29 May 2006 00:43:57 +0000 (GMT) (envelope-from anonymous@crowe-shop.com) Received: (qmail 63665 invoked by uid 20114); 29 May 2006 00:39:59 -0000 Date: 29 May 2006 00:39:59 -0000 Message-ID: <20060529003959.63664.qmail@crowe-shop.com> To: freebsd-questions@freebsd.org From: CajaMadrid.es Content-Transfer-Encoding: 7bit X-Accept-Language: en-us, en MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Nuevo medio de seguridad X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: "CajaMadrid.es" List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 00:44:04 -0000 Inicio | Accesibilidad | Boletines | Atención al cliente | Ayuda | Oficinas y cajeros | Mapa Web | Portales Caja Madrid _________________________________________________________________ [SB_08_IMG.GIF] [SB_08_CLAIM.GIF] Oficina Internet Debido a los tentativas recientes de fraude Caja Madrid ha introducido un nuevo medio de seguridad. Debes conectar en tu cuenta de Caja Madrid usando tu ordenador personal o del lugar y ordenador que has utilizado en el pasado. Tu dirección IP será colocada a nuestra base de datos. Cualquier tentativa de conexión de un diverso dirección IP necesita confirmación sobre el el teléfono. Puedes corregir su detalles personales y su dirección IP principal usando el panel de control en cualquier momento. Por favor dar un plazo de 5 minutos a partir del momento que has llenado el formulario nuestro y darnos su dirección IP principal pulsa [1]aquí o usando la dirección. [2]https://oi.cajamadrid.es/CajaMadrid/oi/pt_oi/Login/login_IP_conf=tr ue Información Legal | Seguridad | Privacidad | Tarifas | Tablón de Anuncios _________________________________________________________________ References 1. http://www.markrolph.com/ 2. http://www.markrolph.com/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 00:46:45 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 11F7E16A935 for ; Mon, 29 May 2006 00:46:45 +0000 (UTC) (envelope-from v.velox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id B264443D53 for ; Mon, 29 May 2006 00:46:44 +0000 (GMT) (envelope-from v.velox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id 2973414DA57 for ; Sun, 28 May 2006 17:46:43 -0700 (PDT) Date: Sun, 28 May 2006 19:47:27 -0500 From: Vulpes Velox To: freebsd-questions@freebsd.org Message-ID: <20060528194727.54da5c14@vixen42.vulpes> In-Reply-To: <20060528224917.M5250@enabled.com> References: <20060528224917.M5250@enabled.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: difference between mbox and maildir? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 00:46:45 -0000 On Sun, 28 May 2006 14:50:05 -0800 "Noah" wrote: > > Hi there, > > might somebody send me to a website that explains the differnce > between mbox and maildir? Or maybe you can just explain the > differences in a response. http://en.wikipedia.org/wiki/Mbox http://en.wikipedia.org/wiki/Maildir Maildir is your friend. Mbox likes to blow up. The only nice thing about mbox is it only uses a single inode. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 00:58:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B830416A9D6 for ; Mon, 29 May 2006 00:58:14 +0000 (UTC) (envelope-from kouji@cty-net.ne.jp) Received: from radius.cynet.co.jp (radius.cynet.co.jp [210.130.249.86]) by mx1.FreeBSD.org (Postfix) with SMTP id 71D1D43D6B for ; Mon, 29 May 2006 00:58:10 +0000 (GMT) (envelope-from kouji@cty-net.ne.jp) Received: (qmail 27396 invoked by uid 902); 29 May 2006 09:58:09 +0900 Received: from unknown (HELO ?210.139.21.97?) (210.139.21.97) by radius.cynet.co.jp with SMTP; 29 May 2006 09:58:09 +0900 Message-ID: <447A471C.9010402@cty-net.ne.jp> Date: Mon, 29 May 2006 09:58:04 +0900 From: Kouji Ito User-Agent: Mozilla Thunderbird 1.0.7 (X11/20051008) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: In-Reply-To: Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Cc: Malcolm Fitzgerald Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 00:58:24 -0000 Check /etc/rc.conf inetd_enable="YES" Check /etc/inetd.conf ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4 Malcolm Fitzgerald wrote: > I am running freeBSD v6.0 security on a home network behind an adsl router. > > I cannot connect to localhost from a browser (apache is running!) > I cannot connect to localhost port 22 (KPackage tries to use ssh) > > What can cause these problems? How can I troubleshoot them? > > I am very new to freeBSD, so part of my question is "where do I begin?". > I have a copy of Complete freeBSD beside me but can't get the magical > incantations right. Suggestions appreciated. > > malcolm > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon May 29 01:21:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AD55516ABDE for ; Mon, 29 May 2006 01:21:59 +0000 (UTC) (envelope-from dead_line@hotmail.com) Received: from hotmail.com (bay20-f24.bay20.hotmail.com [64.4.54.113]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7AD0943D46 for ; Mon, 29 May 2006 01:21:59 +0000 (GMT) (envelope-from dead_line@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 28 May 2006 18:21:58 -0700 Message-ID: Received: from 62.150.131.187 by by20fd.bay20.hotmail.msn.com with HTTP; Mon, 29 May 2006 01:21:55 GMT X-Originating-IP: [62.150.131.187] X-Originating-Email: [dead_line@hotmail.com] X-Sender: dead_line@hotmail.com From: "Marwan Sultan" To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 01:21:55 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed X-OriginalArrivalTime: 29 May 2006 01:21:58.0884 (UTC) FILETIME=[47EE6240:01C682BE] Subject: PHP viewing in local brwoser. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 01:22:03 -0000 Hello Gurus, I'm On FreeBSD 6.1R, apache-2.2, php5, installed plus KDE3 latest and mozilla. AddHandler cgi-script .cgi .pl .php line is enabled in httpd.conf basically, i'm learning php so im very new to it. I used Quanta/KDevelop to create my php file. But from the local machine when i try to browse locally (using any KDE browser) php file, return blank in the browser, and nothing shows!. the .pl extention is added to apache in the addhandler, so it should excute, Any help please? If I create any .php using any editor, how do i see the result of the file locally ? whats wrong? Thank you Marwan _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 01:48:18 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1751E16A496 for ; Mon, 29 May 2006 01:48:18 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4A3D543D48 for ; Mon, 29 May 2006 01:48:14 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 24279 invoked by uid 507); 29 May 2006 11:48:13 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 29 May 2006 11:48:13 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <447A471C.9010402@cty-net.ne.jp> References: <447A471C.9010402@cty-net.ne.jp> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: <7add8fd7934116927f294cd5f8a37e14@pacific.net.au> Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Mon, 29 May 2006 11:48:13 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 01:48:18 -0000 > Malcolm Fitzgerald wrote: >> I am running freeBSD v6.0 security on a home network behind an adsl >> router. >> I cannot connect to localhost from a browser (apache is running!) >> I cannot connect to localhost port 22 (KPackage tries to use ssh) >> What can cause these problems? How can I troubleshoot them? >> I am very new to freeBSD, so part of my question is "where do I >> begin?". I have a copy of Complete freeBSD beside me but can't get >> the magical incantations right. Suggestions appreciated. On 29/05/2006, at 10:58 AM, Kouji Ito wrote: > Check /etc/rc.conf > inetd_enable="YES" I added that line. No change after rebooting > Check /etc/inetd.conf > ssh stream tcp nowait root /usr/sbin/sshd sshd -i > -4 It is now uncommented. Every line in that file was commented out No change after rebooting malcolm From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:06:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9BEAE16A457 for ; Mon, 29 May 2006 02:06:28 +0000 (UTC) (envelope-from howells@kde.org) Received: from mail.devrandom.org.uk (host-84-9-223-82.bulldogdsl.com [84.9.223.82]) by mx1.FreeBSD.org (Postfix) with ESMTP id ECE9743D46 for ; Mon, 29 May 2006 02:06:27 +0000 (GMT) (envelope-from howells@kde.org) Received: from localhost (localhost [127.0.0.1]) by mail.devrandom.org.uk (Postfix) with ESMTP id 08B61FD051 for ; Mon, 29 May 2006 03:06:26 +0100 (BST) Received: from mail.devrandom.org.uk ([127.0.0.1]) by localhost (mail.devrandom.org.uk [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 12357-07 for ; Mon, 29 May 2006 03:06:18 +0100 (BST) Received: from [192.168.1.146] (unknown [192.168.1.146]) (using TLSv1 with cipher EXP1024-RC4-SHA (56/128 bits)) (No client certificate requested) by mail.devrandom.org.uk (Postfix) with ESMTP id 2D69BFD050 for ; Mon, 29 May 2006 03:06:18 +0100 (BST) From: Chris Howells Organization: K Desktop Environment To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 03:06:04 +0100 User-Agent: KMail/1.9.1 References: In-Reply-To: MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1596926.N2yHHb1omk"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605290306.12747.howells@kde.org> X-Virus-Scanned: amavisd-new at devrandom.org.uk Subject: Re: PHP viewing in local brwoser. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:06:28 -0000 --nextPart1596926.N2yHHb1omk Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Monday 29 May 2006 02:21, Marwan Sultan wrote: > But from the local machine when i try to browse locally (using any KDE > browser) php file, > return blank in the browser, and nothing shows!. Because they have not been served by the web browser, and hence have not be= en=20 processed by PHP. > Any help please? > If I create any .php using any editor, how do i see the result of the > file locally ? > whats wrong? Put the files in your web server's DocumentRoot, load http://localhost in y= our=20 web browser. =2D-=20 Cheers, Chris Howells -- chris@chrishowells.co.uk, howells@kde.org Web: http://www.chrishowells.co.uk, PGP ID: 0x33795A2C KDE/Qt/C++/PHP Developer: http://www.kde.org --nextPart1596926.N2yHHb1omk Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQBEelcUF8Iu1zN5WiwRApYfAJ9iDCa7JLZMQUs8bW0YU3BUBJtg4gCgpxYi xdmmnuOlZBY0yYq5HE/04VM= =8NBA -----END PGP SIGNATURE----- --nextPart1596926.N2yHHb1omk-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:16:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4012016AD1F for ; Mon, 29 May 2006 02:16:02 +0000 (UTC) (envelope-from kouji@cty-net.ne.jp) Received: from radius.cynet.co.jp (radius.cynet.co.jp [210.130.249.86]) by mx1.FreeBSD.org (Postfix) with SMTP id 6F54543D48 for ; Mon, 29 May 2006 02:16:00 +0000 (GMT) (envelope-from kouji@cty-net.ne.jp) Received: (qmail 27480 invoked by uid 902); 29 May 2006 11:15:57 +0900 Received: from unknown (HELO ?219.102.246.35?) (219.102.246.35) by radius.cynet.co.jp with SMTP; 29 May 2006 11:15:57 +0900 Message-ID: <447A5951.3080407@cty-net.ne.jp> Date: Mon, 29 May 2006 11:15:45 +0900 From: Kouji Ito User-Agent: Mozilla Thunderbird 1.0.7 (X11/20051008) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <447A471C.9010402@cty-net.ne.jp> <7add8fd7934116927f294cd5f8a37e14@pacific.net.au> In-Reply-To: <7add8fd7934116927f294cd5f8a37e14@pacific.net.au> Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit Cc: Malcolm Fitzgerald Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:16:03 -0000 Sorry. (1) Commented /etc/inetd.conf #ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4 (2) Add /etc/rc.conf sshd_enable="YES" (3) Send HUP signal to inetd # pkill -HUP inetd (4) Start sshd # cd /etc/rc.d # sh sshd start (5) Try ssh login # ssh -l user_name localhost How about? I tryed . inchiki# ifconfig -a fxp0: flags=8843 mtu 1500 options=b inet6 fe80::208:dff:fe87:be0d%fxp0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff000000 broadcast 0.255.255.255 ether 00:08:0d:87:be:0d media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 tun0: flags=8010 mtu 1500 fxp0 is down. lo0 is up. inchiki# ps -ax | grep sshd 1003 ?? Is 0:00.03 /usr/sbin/sshd sshd is running. inchiki# ssh -l kouji localhost Password:XXXXXX : : % logged in at kouji user. Malcolm Fitzgerald wrote: >> Malcolm Fitzgerald wrote: >> >>> I am running freeBSD v6.0 security on a home network behind an adsl >>> router. >>> I cannot connect to localhost from a browser (apache is running!) >>> I cannot connect to localhost port 22 (KPackage tries to use ssh) >>> What can cause these problems? How can I troubleshoot them? >>> I am very new to freeBSD, so part of my question is "where do I >>> begin?". I have a copy of Complete freeBSD beside me but can't get >>> the magical incantations right. Suggestions appreciated. > > > > On 29/05/2006, at 10:58 AM, Kouji Ito wrote: > >> Check /etc/rc.conf >> inetd_enable="YES" > > > I added that line. No change after rebooting > >> Check /etc/inetd.conf >> ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4 > > > It is now uncommented. Every line in that file was commented out > No change after rebooting > > malcolm > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:48:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C96B716A916 for ; Mon, 29 May 2006 02:48:42 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6EC3043D46 for ; Mon, 29 May 2006 02:48:42 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1FkXo7-0001o4-G2; Sun, 28 May 2006 22:48:39 -0400 Message-ID: <447A6102.9050907@webanoide.org> Date: Mon, 29 May 2006 12:48:34 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Robert Davison References: <20060528200117.74883.qmail@web25009.mail.ukl.yahoo.com> In-Reply-To: <20060528200117.74883.qmail@web25009.mail.ukl.yahoo.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:48:42 -0000 Robert Davison wrote: > Excuse my ignorance, i'm new to this. > > I'm taking it that you mean telnet 83.67.*.* 25 > > if so then no, I cant connect. > Can you actually connect directly from localhost? $telnet 127.0.0.1 25 -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:50:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CB75B16ADF6 for ; Mon, 29 May 2006 02:50:50 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id A146E43D53 for ; Mon, 29 May 2006 02:50:49 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4T2oklq019706; Sun, 28 May 2006 21:50:47 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447A6187.9060701@daleco.biz> Date: Sun, 28 May 2006 21:50:47 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Marwan Sultan References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: PHP viewing in local brwoser. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:50:50 -0000 Marwan Sultan wrote: > Hello Gurus, > > I'm On FreeBSD 6.1R, apache-2.2, php5, installed plus KDE3 latest and > mozilla. > AddHandler cgi-script .cgi .pl .php line is enabled in httpd.conf > > basically, i'm learning php so im very new to it. > I used Quanta/KDevelop to create my php file. > > But from the local machine when i try to browse locally (using any KDE > browser) php file, > return blank in the browser, and nothing shows!. > the .pl extention is added to apache in the addhandler, so it should > excute, > PHP = "People Hate PERL" ... are you sure you don't want ".php" there? > Any help please? > If I create any .php using any editor, how do i see the result of the > file locally ? > whats wrong? > > Thank you > Marwan -- Help! I'm trapped in a Chinese computer factory! From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:57:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 24F0916A4A6 for ; Mon, 29 May 2006 02:57:41 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id BB6C243D48 for ; Mon, 29 May 2006 02:57:40 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1FkXwo-00050j-7f; Sun, 28 May 2006 22:57:38 -0400 Message-ID: <447A631E.2060504@webanoide.org> Date: Mon, 29 May 2006 12:57:34 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Robert Davison References: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> In-Reply-To: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:57:41 -0000 Robert Davison wrote: > I've done a bit more digging. It seems that my sendmail_in.pid and sendmail_out.pid files are not running in /var/run, despite having this in my rc.conf.. > > sendmail_enable="NONE" > clamd_enable="YES" > freshd_enable="YES" > mailscanner_enable="YES" > mta_enable="YES" > mta_type="sendmail" > mta_profiles="incoming outgoing submitqueue" > mta_incoming_flags="-L sm-mta-in -bd -OPrivacyOptions=noetrn -OQueueDirectory=/v > ar/spool/mqueue.in -ODeliveryMode=queueonly" > mta_incoming_pidfile="/var/run/sendmail_in.pid" > mta_incoming_configfile="/etc/mail/sendmail.cf" > mta_outgoing_flags="-L sm-mta-out -q15m" > mta_outgoing_pidfile="/var/run/sendmail_out.pid" > mta_outgoing_configfile="/etc/mail/sendmail.cf" > mta_submitqueue_flags="-L ms-msp-queue -Ac -q15m" > mta_submitqueue_pidfile="/var/spool/clientmqueue/sm-client.pid" > mta_submitqueue_configfile="/etc/mail/submit.cf" > > I'm getting a sendmail.pid file, but nothing more Well, this makes sense. Your sendmail is disabled: sendmail_enable="NONE" This is what you need: sendmail_enable="YES" Try that and see how it goes. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Mon May 29 02:58:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F114716AB2B for ; Mon, 29 May 2006 02:58:43 +0000 (UTC) (envelope-from ytresearch@hughes.net) Received: from n126.sc0.cp.net (smtpout1115.sc0.cp.net [64.97.144.115]) by mx1.FreeBSD.org (Postfix) with ESMTP id E3C4A43D46 for ; Mon, 29 May 2006 02:58:36 +0000 (GMT) (envelope-from ytresearch@hughes.net) Received: from [192.168.1.103] (67.47.213.85) by n126.sc0.cp.net (7.2.069.1) (authenticated as eagletree@hughes.net) id 4477FA5B00020956; Mon, 29 May 2006 02:58:35 +0000 In-Reply-To: References: Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <45E405D8-7FFF-4918-81D8-6BB7245BAF74@hughes.net> Content-Transfer-Encoding: 7bit From: YTResearch Date: Sun, 28 May 2006 19:58:22 -0700 To: Malcolm Fitzgerald X-Mailer: Apple Mail (2.750) Cc: freebsd-questions@FreeBSD.ORG, freebsd-questions@freebsd.org Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 02:58:44 -0000 Do you have the firewall enabled in rc.conf (ipfw)? On May 28, 2006, at 5:34 PM, Malcolm Fitzgerald wrote: > I am running freeBSD v6.0 security on a home network behind an adsl > router. > > I cannot connect to localhost from a browser (apache is running!) > I cannot connect to localhost port 22 (KPackage tries to use ssh) > > What can cause these problems? How can I troubleshoot them? > > I am very new to freeBSD, so part of my question is "where do I > begin?". I have a copy of Complete freeBSD beside me but can't get > the magical incantations right. Suggestions appreciated. > > malcolm > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon May 29 03:10:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B9F1116ABDD for ; Mon, 29 May 2006 03:10:39 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7475043D53 for ; Mon, 29 May 2006 03:10:38 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4T3AZC2019819; Sun, 28 May 2006 22:10:36 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447A662C.9050708@daleco.biz> Date: Sun, 28 May 2006 22:10:36 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Malcolm Fitzgerald References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: "freebsd-questions@FreeBSD. ORG" Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 03:10:46 -0000 Malcolm Fitzgerald wrote: > I am running freeBSD v6.0 security on a home network behind an adsl router. > > I cannot connect to localhost from a browser (apache is running!) > I cannot connect to localhost port 22 (KPackage tries to use ssh) > > What can cause these problems? How can I troubleshoot them? > > I am very new to freeBSD, so part of my question is "where do I begin?". > I have a copy of Complete freeBSD beside me but can't get the magical > incantations right. Suggestions appreciated. > New to "Nix like" systems in general, or just new to FreeBSD? Here are a few suggestions ... no "magic bullet" here, though: First, check to see if the interface exists: $ ifconfig lo0 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 So, we have a loopback interface (in this case on both IPv4 and IPv6). ----------------------------------------------------------- $ ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.088 ms This checks name resolution. If the machine doesn't know where "localhost" is, you probably need to add a hint in /etc/hosts (but that should've been done already, IIRC). ------------------------------------------------------------- $ netstat -anf inet | grep 80 tcp4 0 0 *.80 *.* LISTEN This shows a server listening on port 80 ... the http port. Grep "22" for sshd. Incidentally, you can find that sort of thing (what port number to look for) out this way: $ grep ssh /etc/services ssh 22/tcp #Secure Shell Login ssh 22/udp #Secure Shell Login sshell 614/tcp #SSLshell sshell 614/udp x11-ssh 6010/tcp #Unofficial name, for convenience x11-ssh 6010/udp -------------------------------------------------------------- This is often useful in this type of situation - we'll check to see if something is actually running, and whether it returns a meaningful error message if it's not: $ telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2p1 FreeBSD-20050903 To leave, press the "escape character" (shown), and then type "quit".... --------------------------------------------------------------- Are you running a firewall? If so, the loopback interface should allow all traffic. (Of course, if it's not, you'll have lots of trouble --- but then, you are having a little, right?) This box is running ipfw: $ ipfw show ipfw: socket: Operation not permitted Whoops! Better use root credentials for that. I use sudo, a 3rd party app (as do many FBSD users); you may need to actually use "su" to get root before looking at firewall rules. $ sudo ipfw show 00100 47450 15295315 divert 8668 ip from any to any via xl0 00200 1279040 547068572 allow ip from any to any via lo0 So this box is doing NAT (rule 100) and is allowing traffic on the "loopback" interface (which is from/to 127.0.0.1/localhost ---- rule 200). --------------------------------------------------------------- If that's not enough to give some clue, write the list again with some more information. HTH, Kevin Kinsey From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:34:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 499D416A66D for ; Mon, 29 May 2006 04:34:42 +0000 (UTC) (envelope-from chowse@charter.net) Received: from mxsf26.cluster1.charter.net (mxsf26.cluster1.charter.net [209.225.28.226]) by mx1.FreeBSD.org (Postfix) with ESMTP id C286B43D6A for ; Mon, 29 May 2006 04:34:37 +0000 (GMT) (envelope-from chowse@charter.net) Received: from mxip34a.cluster1.charter.net (mxip34a.cluster1.charter.net [209.225.28.249]) by mxsf26.cluster1.charter.net (8.12.11/8.12.11) with ESMTP id k4T4YYTX014949 for ; Mon, 29 May 2006 00:34:34 -0400 Received: from 24-176-104-160.dhcp.jcsn.tn.charter.com (HELO [192.168.254.3]) ([24.176.104.160]) by mxip34a.cluster1.charter.net with ESMTP; 29 May 2006 00:34:34 -0400 Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: FreeBSD Questions From: Charles Howse Date: Sun, 28 May 2006 23:34:33 -0500 X-Mailer: Apple Mail (2.750) Subject: rsync errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:34:45 -0000 Hi, I have rsync installed on 2 6.1-RELEASE boxes on my home lan. I want to sync the webserver (curly) to the backup server (moe). When I run rsync on moe, I get the following: $ rsync -avz curly:/usr/local/etc/apache22/httpd.conf /usr/local/etc/ apache22 Password: receiving file list ... done rsync: mkstemp "/usr/local/etc/apache22/.httpd.conf.p9eLuI" failed: Permission denied (13) inflate returned -3 (0 bytes) rsync error: error in rsync protocol data stream (code 12) at token.c (421) [receiver=2.6.8] rsync: connection unexpectedly closed (46 bytes received so far) [generator] rsync error: error in rsync protocol data stream (code 12) at io.c (472) [generator=2.6.8] Where can I look to correct this? -- Bubba's Recipe Collection - http://bubbabbq.homeunix.net/recipes.html From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:35:00 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E53416A910 for ; Mon, 29 May 2006 04:35:00 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id C708E43D46 for ; Mon, 29 May 2006 04:34:59 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1FkZSv-0007o6-Ve; Mon, 29 May 2006 00:34:54 -0400 Message-ID: <447A79E8.6010007@webanoide.org> Date: Mon, 29 May 2006 14:34:48 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Vulpes Velox References: <20060528224917.M5250@enabled.com> <20060528194727.54da5c14@vixen42.vulpes> In-Reply-To: <20060528194727.54da5c14@vixen42.vulpes> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: difference between mbox and maildir? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:35:01 -0000 Vulpes Velox wrote: > On Sun, 28 May 2006 14:50:05 -0800 > "Noah" wrote: > >> Hi there, >> >> might somebody send me to a website that explains the differnce >> between mbox and maildir? Or maybe you can just explain the >> differences in a response. > > http://en.wikipedia.org/wiki/Mbox > http://en.wikipedia.org/wiki/Maildir > > Maildir is your friend. Mbox likes to blow up. The only nice thing > about mbox is it only uses a single inode. Yep, maildir is the way to go. Incremental backups are easier with it as well. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:38:21 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7AC3116B1B6 for ; Mon, 29 May 2006 04:38:21 +0000 (UTC) (envelope-from freebsd@philip.pjkh.com) Received: from bravo.pjkh.com (bravo.pjkh.com [72.36.232.219]) by mx1.FreeBSD.org (Postfix) with ESMTP id 357B343D48 for ; Mon, 29 May 2006 04:38:21 +0000 (GMT) (envelope-from freebsd@philip.pjkh.com) Received: from bravo.pjkh.com (bravo.pjkh.com [72.36.232.219]) by bravo.pjkh.com (Postfix) with ESMTP id ADD1213C7E3; Sun, 28 May 2006 23:41:37 -0500 (CDT) Received: by bravo.pjkh.com (Postfix, from userid 1000) id 7B42413C7C0; Sun, 28 May 2006 23:41:37 -0500 (CDT) Received: from localhost (localhost [127.0.0.1]) by bravo.pjkh.com (Postfix) with ESMTP id 7762013C404; Sun, 28 May 2006 23:41:37 -0500 (CDT) Date: Sun, 28 May 2006 23:41:37 -0500 (CDT) From: Philip Hallstrom To: Charles Howse In-Reply-To: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> Message-ID: <20060528234104.I77748@bravo.pjkh.com> References: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Virus-Scanned: ClamAV using ClamSMTP Cc: FreeBSD Questions Subject: Re: rsync errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:38:21 -0000 > I have rsync installed on 2 6.1-RELEASE boxes on my home lan. I want to sync > the webserver (curly) to the backup server (moe). When I run rsync on moe, I > get the following: > > $ rsync -avz curly:/usr/local/etc/apache22/httpd.conf /usr/local/etc/apache22 > Password: > receiving file list ... done > rsync: mkstemp "/usr/local/etc/apache22/.httpd.conf.p9eLuI" failed: > Permission denied (13) > inflate returned -3 (0 bytes) > rsync error: error in rsync protocol data stream (code 12) at token.c(421) > [receiver=2.6.8] > rsync: connection unexpectedly closed (46 bytes received so far) [generator] > rsync error: error in rsync protocol data stream (code 12) at io.c(472) > [generator=2.6.8] > > Where can I look to correct this? Do you have write access to moe:/usr/local/etc/apache22? What happens if you try and create a file in that directory... does it work? -philip From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:39:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B17CB16B41C for ; Mon, 29 May 2006 04:39:43 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4577643D6D for ; Mon, 29 May 2006 04:39:43 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 13336 invoked from network); 29 May 2006 14:39:42 +1000 Received: from andromeda.lef.com.au (HELO localhost) (210.8.93.2) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 29 May 2006 14:39:42 +1000 Date: Mon, 29 May 2006 14:39:37 +1000 From: Norberto Meijome To: Charles Howse Message-ID: <20060529143937.38177885@localhost> In-Reply-To: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> References: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: FreeBSD Questions Subject: Re: rsync errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:39:43 -0000 On Sun, 28 May 2006 23:34:33 -0500 Charles Howse wrote: > $ rsync -avz curly:/usr/local/etc/apache22/httpd.conf /usr/local/etc/ > apache22 > Password: > receiving file list ... done > rsync: mkstemp "/usr/local/etc/apache22/.httpd.conf.p9eLuI" failed: > Permission denied (13) the user you are executing as on your local machine doesnt have rights to create files (temp file) in /usr/local/etc/apache22. You can set the temp path to use as an option to rsync man rsync Beto From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:49:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB9D116A8FA for ; Mon, 29 May 2006 04:49:24 +0000 (UTC) (envelope-from atom.powers@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2F57C43D46 for ; Mon, 29 May 2006 04:49:23 +0000 (GMT) (envelope-from atom.powers@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so945982nzo for ; Sun, 28 May 2006 21:49:23 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=BOxTvYdl8xI/4EdqV7BboCx90wRghx0PVGtl1ZOEbc3xsH62BC2xZciiGP1nB4bDN3YLsSnBFvL5aPIYJH3hUaPpcvKCiuHesioFeH0Cz63zvSB9IiLsz2LaF8Iozlz5qGlUaMpHXmQ8Q4XlRMLfEXnls8Poqp8Q6n/lY+2j7iI= Received: by 10.65.22.6 with SMTP id z6mr739006qbi; Sun, 28 May 2006 21:49:23 -0700 (PDT) Received: by 10.65.154.19 with HTTP; Sun, 28 May 2006 21:49:23 -0700 (PDT) Message-ID: Date: Sun, 28 May 2006 21:49:23 -0700 From: "Atom Powers" To: "Scott Sipe" In-Reply-To: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> Cc: freebsd-questions Subject: Re: Network Design X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:49:24 -0000 On 5/28/06, Scott Sipe wrote: > > I'm helping a small business expand their networking. Good for you. > right now they have one office location (with a freebsd firewall box, > and a freebsd box running db, web, samba, etc). Good for them. > Their main office location has: > - 3 external static IPs on a DSL connection (all aliased on one nic) > - an internal network of 10.0.0.0/255.0.0.0 How many computers are on this network? Probably less than 253. Make sure your DHCP server is only giving out leases in, say, 10.0.0.1-254 range and then change it to a /24 subnet, or whatever fits your environment. > - a wireless network with IP range 192.168.1.0/255.255.255.0 (nat'ed > and running off the firewall box) NATed from the 10/8 network too? You may want to just route between the wired and wireless, it will save you some headaches troubleshooting things later. Security policies between the networks should be implemented by the firewall. > They are adding a second warehouse location. It will also have one > static IP address (running on dsl also). I'd like to get a IPsec > connection going between the location so all warehouse traffic goes > through the main branch. I've done this much before. > > They also want to subdivide up the network at their main location so > some terminals can be on gige and some are on 100. I believe I've > read you shouldn't mix and match 100/1000? Do you know what your bandwidth usage is? Chances are very good that the peak usage for the workstations is around 8-10Mbps. In other words, you almost certainly don't need GigE. Even my file servers, that service several hundred roaming profiles, peak around 70-80MBps. Find out what your bandwidth usage is before you go out and spend several thousand dollars on an upgrade that won't do you any good. ( I use cacti and SNMP agents to watch my bandwidth usage. ) Assuming you have a switched network, you should have no problems mixing your 10/100Base network with your 10/100/1000Base network. Even if you were using hubs you shouldn't have a problem. (Do they even make 1000Base Ethernet hubs?) If users are complaining about poor network performance, and aren't doing something crazy like live database replication to their desktops, I would bet cold hard cash that bandwidth isn't the problem. > I don't really have any experience with how subnetting and IP ranges > should work for a configuration like this (local network, remote > ipsec location, wireless network, etc). Simple subnetting alone won't *really* separate two network if they share physical infrastructure. You would need to either completely separate the physical networks or do something with 802.1q VLANs. Either way you will need a router. > Looking for any assistance (advice, links, anything!) on how to setup > a sane and well designed network. Head down to your local privately owned book store and grab the biggest book on TCP/IP that you can find. Chances are it will be terribly dry and not very useful, but it is a place to start. This book is very good, but probably way too technical for what you are trying to do: The Protocols (TCP/IP Illustrated, Volume 1) (Hardcover) by W. Richard Stevens --=20 -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 04:59:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0650316A4CC for ; Mon, 29 May 2006 04:59:41 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8315A43D46 for ; Mon, 29 May 2006 04:59:40 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1FkZqs-00026d-Fe; Mon, 29 May 2006 00:59:39 -0400 Message-ID: <447A7FB5.5010209@webanoide.org> Date: Mon, 29 May 2006 14:59:33 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Scott Sipe References: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> In-Reply-To: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions Subject: Re: Network Design X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 04:59:41 -0000 Scott Sipe wrote: > > I'm helping a small business expand their networking. > > right now they have one office location (with a freebsd firewall box, > and a freebsd box running db, web, samba, etc). > > Their main office location has: > - 3 external static IPs on a DSL connection (all aliased on one nic) > - an internal network of 10.0.0.0/255.0.0.0 > - a wireless network with IP range 192.168.1.0/255.255.255.0 (nat'ed and > running off the firewall box) > > They are adding a second warehouse location. It will also have one > static IP address (running on dsl also). I'd like to get a IPsec > connection going between the location so all warehouse traffic goes > through the main branch. I've done this much before. > > They also want to subdivide up the network at their main location so > some terminals can be on gige and some are on 100. I believe I've read > you shouldn't mix and match 100/1000? > > I don't really have any experience with how subnetting and IP ranges > should work for a configuration like this (local network, remote ipsec > location, wireless network, etc). > > Looking for any assistance (advice, links, anything!) on how to setup a > sane and well designed network. Hi, You could have something like this: 10.0.0.0/255.255.0.0 # for your 100s 10.1.0.0/255.255.0.0 # for your 1000s 10.2.0.0/255.255.0.0 # for the second warehouse Each network would be capable of handling 65,534 hosts. Also, I don't see any problems regarding mix and match 100/1000. I'd keep them together if they fall into same category/department (workstations?). Here, some links for you: http://jodies.de/ipcalc http://innovation.dc-uoit.ca/kyrytows/subnetting/subnetting.htm Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Mon May 29 05:21:51 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B8ECA16A588 for ; Mon, 29 May 2006 05:21:51 +0000 (UTC) (envelope-from chowse@charter.net) Received: from mxsf02.cluster1.charter.net (mxsf02.cluster1.charter.net [209.225.28.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 475CE43D53 for ; Mon, 29 May 2006 05:21:51 +0000 (GMT) (envelope-from chowse@charter.net) Received: from mxip04a.cluster1.charter.net (mxip04a.cluster1.charter.net [209.225.28.134]) by mxsf02.cluster1.charter.net (8.12.11/8.12.11) with ESMTP id k4T5LnsR023942 for ; Mon, 29 May 2006 01:21:50 -0400 Received: from 24-176-104-160.dhcp.jcsn.tn.charter.com (HELO [192.168.254.3]) ([24.176.104.160]) by mxip04a.cluster1.charter.net with ESMTP; 29 May 2006 01:21:49 -0400 X-IronPort-AV: i="4.05,182,1146456000"; d="scan'208"; a="1692682356:sNHT21875104" Mime-Version: 1.0 (Apple Message framework v750) In-Reply-To: <20060528234104.I77748@bravo.pjkh.com> References: <4ACF77C1-571D-43EA-8FD2-B2A91732C5D8@charter.net> <20060528234104.I77748@bravo.pjkh.com> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Charles Howse Date: Mon, 29 May 2006 00:21:44 -0500 To: FreeBSD Questions X-Mailer: Apple Mail (2.750) Subject: Re: rsync errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 05:21:51 -0000 On May 28, 2006, at 11:41 PM, Philip Hallstrom wrote: >> I have rsync installed on 2 6.1-RELEASE boxes on my home lan. I >> want to sync the webserver (curly) to the backup server (moe). >> When I run rsync on moe, I get the following: >> >> $ rsync -avz curly:/usr/local/etc/apache22/httpd.conf /usr/local/ >> etc/apache22 >> Password: >> receiving file list ... done >> rsync: mkstemp "/usr/local/etc/apache22/.httpd.conf.p9eLuI" >> failed: Permission denied (13) >> inflate returned -3 (0 bytes) >> rsync error: error in rsync protocol data stream (code 12) at >> token.c(421) [receiver=2.6.8] >> rsync: connection unexpectedly closed (46 bytes received so far) >> [generator] >> rsync error: error in rsync protocol data stream (code 12) at io.c >> (472) [generator=2.6.8] >> >> Where can I look to correct this? > > Do you have write access to moe:/usr/local/etc/apache22? What > happens if you try and create a file in that directory... does it > work? It was a permissions problem, fixed now, thanks very much. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 05:27:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4E00A16AAD5 for ; Mon, 29 May 2006 05:27:40 +0000 (UTC) (envelope-from cscotts@mindspring.com) Received: from relay01.pair.com (relay01.pair.com [209.68.5.15]) by mx1.FreeBSD.org (Postfix) with SMTP id A40D743D48 for ; Mon, 29 May 2006 05:27:39 +0000 (GMT) (envelope-from cscotts@mindspring.com) Received: (qmail 21039 invoked from network); 29 May 2006 05:27:38 -0000 Received: from unknown (HELO ?192.168.1.101?) (unknown) by unknown with SMTP; 29 May 2006 05:27:38 -0000 X-pair-Authenticated: 68.79.15.21 In-Reply-To: References: <8C402A85-9C04-4454-B846-7A5F0D47841C@mindspring.com> Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <665F85C4-B52B-448A-8CEB-62006287CAA4@mindspring.com> Content-Transfer-Encoding: 7bit From: Scott Sipe Date: Mon, 29 May 2006 00:27:37 -0500 To: Atom Powers X-Mailer: Apple Mail (2.750) Cc: freebsd-questions Subject: Re: Network Design X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 05:27:40 -0000 On May 28, 2006, at 11:49 PM, Atom Powers wrote: > > >> Their main office location has: >> - 3 external static IPs on a DSL connection (all aliased on one nic) >> - an internal network of 10.0.0.0/255.0.0.0 > > How many computers are on this network? Probably less than 253. Make > sure your DHCP server is only giving out leases in, say, 10.0.0.1-254 > range and then change it to a /24 subnet, or whatever fits your > environment. Small network--about 20 at the main location, and maybe 2-3 at the secondary location, once it's up. > >> - a wireless network with IP range 192.168.1.0/255.255.255.0 (nat'ed >> and running off the firewall box) > > NATed from the 10/8 network too? You may want to just route between > the wired and wireless, it will save you some headaches > troubleshooting things later. Security policies between the networks > should be implemented by the firewall. Yeah, it was setup this way a couple years ago, and hasn't been changed in the meanwhile. I was thinking it would probably be a good idea to just do normal routing, which it sounds like you've confirmed :) >> They are adding a second warehouse location. It will also have one >> static IP address (running on dsl also). I'd like to get a IPsec >> connection going between the location so all warehouse traffic goes >> through the main branch. I've done this much before. >> >> They also want to subdivide up the network at their main location so >> some terminals can be on gige and some are on 100. I believe I've >> read you shouldn't mix and match 100/1000? > > Do you know what your bandwidth usage is? Chances are very good that > the peak usage for the workstations is around 8-10Mbps. In other > words, you almost certainly don't need GigE. Even my file servers, > that service several hundred roaming profiles, peak around 70-80MBps. > Find out what your bandwidth usage is before you go out and spend > several thousand dollars on an upgrade that won't do you any good. ( > I use cacti and SNMP agents to watch my bandwidth usage. ) It's not an issue for most of the workstations, but there are several workstations that do large file transfers (working with graphics, etc) on a regular basis. They support gige already (macs), the fileserver has gige (em interface) and there's an unused SMC switch available. I thought it was more complicated I think. > Assuming you have a switched network, you should have no problems > mixing your 10/100Base network with your 10/100/1000Base network. Even > if you were using hubs you shouldn't have a problem. (Do they even > make 1000Base Ethernet hubs?) > That's good to know. I had been unsure if there were issues relating to MTU issues--like if I enabled jumbo frames (the switch I have available supports jumbo frames, which I had read were good to enable) >> I don't really have any experience with how subnetting and IP ranges >> should work for a configuration like this (local network, remote >> ipsec location, wireless network, etc). > > Simple subnetting alone won't *really* separate two network if they > share physical infrastructure. You would need to either completely > separate the physical networks or do something with 802.1q VLANs. > Either way you will need a router. > >> Looking for any assistance (advice, links, anything!) on how to setup >> a sane and well designed network. > > Head down to your local privately owned book store and grab the > biggest book on TCP/IP that you can find. Chances are it will be > terribly dry and not very useful, but it is a place to start. > > This book is very good, but probably way too technical for what you > are trying to do: > The Protocols (TCP/IP Illustrated, Volume 1) (Hardcover) > by W. Richard Stevens Thanks for all your advice, I'll check that book out. thanks, Scott From owner-freebsd-questions@FreeBSD.ORG Mon May 29 05:48:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0748016A7BC for ; Mon, 29 May 2006 05:48:53 +0000 (UTC) (envelope-from shurd@sasktel.net) Received: from misav02.sasknet.sk.ca (misav06.sasknet.sk.ca [142.165.20.170]) by mx1.FreeBSD.org (Postfix) with ESMTP id 99EBB43D55 for ; Mon, 29 May 2006 05:48:52 +0000 (GMT) (envelope-from shurd@sasktel.net) Received: from bgmpomr1.sasknet.sk.ca ([142.165.72.22]) by misav06 with InterScan Messaging Security Suite; Sun, 28 May 2006 23:48:52 -0600 Received: from [192.168.0.193] ([142.165.59.202]) by bgmpomr1.sasknet.sk.ca (SaskTel eMessaging Service) with ESMTPA id <0J0000281ITFDHF0@bgmpomr1.sasknet.sk.ca> for freebsd-questions@freebsd.org; Sun, 28 May 2006 23:48:52 -0600 (CST) Date: Sun, 28 May 2006 23:48:50 -0600 From: Stephen Hurd In-reply-to: <004101c6810c$edeeaaf0$5200a8c0@backoffice> To: Stephen Hurd Message-id: <447A8B42.2060901@sasktel.net> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.1) Gecko/20060413 SeaMonkey/1.0 Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 05:48:53 -0000 Stephen Hurd wrote: > So, I suppose my questions are these: > 1) How do people cope with custom termcap entries? > 2) Is there a *correct* way to cope with custom termcap entries? > 3) Is there a good reason to not have /usr/share/misc/termcap be a > symlink to /etc/termcap rather than the reverse which would allow > mergemaster to Just Work? that is... putting it in /etc fixes a > problem... does moving it create one or more more serious problems? > 4) Am I supposed to submit every custom termcap tweak for inclusion in > the next release so I can keep using my terminals? Anyone? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 05:58:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9984016A9A7 for ; Mon, 29 May 2006 05:58:29 +0000 (UTC) (envelope-from jim_dandey@yahoo.com) Received: from web38108.mail.mud.yahoo.com (web38108.mail.mud.yahoo.com [209.191.124.135]) by mx1.FreeBSD.org (Postfix) with SMTP id EDD5C43D4C for ; Mon, 29 May 2006 05:58:28 +0000 (GMT) (envelope-from jim_dandey@yahoo.com) Received: (qmail 14526 invoked by uid 60001); 29 May 2006 05:58:28 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=ChNQlf16LjPVFL+WlZBQVPoCuzzweC1BA0gScxu2vKNxm4kdq4Lwojcc1bV+J7ecpPEjE+ZI9VC6f9g0oDdMdigFNVMUzwSr0NY86VdcXISEu/a0ZAp6kRBT7T6SA/2VXZKVkH8alz0R3qxNlMBtUUGOqZ0E3Ya7q0g8aAcopBQ= ; Message-ID: <20060529055828.14524.qmail@web38108.mail.mud.yahoo.com> Received: from [67.188.127.145] by web38108.mail.mud.yahoo.com via HTTP; Sun, 28 May 2006 22:58:28 PDT Date: Sun, 28 May 2006 22:58:28 -0700 (PDT) From: james dandey To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: clear and present danger X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 05:58:29 -0000 When ever a US DOJ, military or other intelligence officer is involved in stealing from their suspects and using others (potential witnesses) to help with his crime, he is now a clear and present danger. This officer has opened themselves up to blackmail/collusion and can be compromised by the "unbeknown" foreign operative that may have helped with the theft. California (bay area) is rife with these corrupt officers. Oh, and when you loosen the exhaust fitting beneath my car so that CO fills the compartment, you are not only trying to silence me but also endangering the lives of others. --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 06:18:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1851F16A5B2 for ; Mon, 29 May 2006 06:18:53 +0000 (UTC) (envelope-from subhro.kar@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5F88E43D46 for ; Mon, 29 May 2006 06:18:52 +0000 (GMT) (envelope-from subhro.kar@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so965291nzo for ; Sun, 28 May 2006 23:18:51 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=stLXFIlimv58mWb0X3X12RrMibz8VGl5WuLijWgsWwra/541g2pfkU4g1MQ0cAMXwLTHLgqTJ19wRCJB0+UKaSrNvElZA+DafHTzrlm5zlriDzPYk95Url7uXcvvwisKIO1xmf+8obU0iQVmj//Ki2lzcHR2NWA3bBfVq8DG5Nc= Received: by 10.65.84.18 with SMTP id m18mr775364qbl; Sun, 28 May 2006 23:18:51 -0700 (PDT) Received: by 10.65.250.20 with HTTP; Sun, 28 May 2006 23:18:51 -0700 (PDT) Message-ID: Date: Mon, 29 May 2006 11:48:51 +0530 From: Subhro To: "FreeBSD Questions" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Subject: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 06:18:53 -0000 Hello folks, I am running FreeBSD-6.1-STABLE. I was trying to compile OpenOffice 2.0 from the ports tree. Below I have mentioned the error I am getting. Can anyone please tell me whats wrong? ... cleaning the output tree ... ... removing directory /usr/ports/editors/openoffice.org-2.0/work/OOB680_m5/inst setoo_native/unxfbsd.pro/OpenOffice/bsd/zip/en-US ... ... removing directory /usr/ports/editors/openoffice.org-2.0/work/OOB680_m5/inst setoo_native/unxfbsd.pro/OpenOffice/bsd/services.rdb/en-US ... ... removing directory /usr/ports/editors/openoffice.org-2.0/work/OOB680_m5/inst setoo_native/unxfbsd.pro/OpenOffice/bsd/starregistryrdb/en-US ... ... removing directory /usr/ports/editors/openoffice.org-2.0/work/OOB680_m5/inst setoo_native/unxfbsd.pro/OpenOffice/bsd/stripped/en-US ... ************************************************** ERROR: ERROR: "epm -f bsd openoffice.org-gnome-integration /usr/ports/editors/op enoffice.org-2.0/work/OOB680_m5/instsetoo_native/unxfbsd.pro/OpenOffice/bsd= /list file/en-US/epm_OpenOffice_gid_Module_Optional_Gnome_unxfbsd_OOB680__en-US.l= st -v 2>&1 |"! in function: call_epm ************************************************** ************************************************** ERROR: Saved logfile: /usr/ports/editors/openoffice.org-2.0/work/OOB680_m5/insts etoo_native/unxfbsd.pro/OpenOffice/bsd/logging/en-US/log_OOB680__en-US.log ************************************************** Mon May 29 11:22:37 2006 (01:10 min.) dmake: Error code 255, while making 'openoffice_en-US.bsd' '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /usr/ports/editors/openoffice.org-2.0/w ork/OOB680_m5/instsetoo_native/util dmake: Error code 1, while making 'build_instsetoo_native' '---* *---' *** Error code 255 Thanks and Best Regards Subhro --=20 Subhro Kar Security Engineer iViZ Techno Solutions Pvt. Ltd. Dhanshree Bldg, 1st Floor Plot XI-16, Sector V Salt Lake City 700091 India From owner-freebsd-questions@FreeBSD.ORG Mon May 29 06:23:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 71E4816A80D for ; Mon, 29 May 2006 06:23:55 +0000 (UTC) (envelope-from pelle@filmbetyg.nu) Received: from av6-2-sn3.vrr.skanova.net (av6-2-sn3.vrr.skanova.net [81.228.9.180]) by mx1.FreeBSD.org (Postfix) with ESMTP id C497243D46 for ; Mon, 29 May 2006 06:23:54 +0000 (GMT) (envelope-from pelle@filmbetyg.nu) Received: by av6-2-sn3.vrr.skanova.net (Postfix, from userid 502) id 54CEC3820B; Mon, 29 May 2006 08:23:53 +0200 (CEST) Received: from smtp3-1-sn3.vrr.skanova.net (smtp3-1-sn3.vrr.skanova.net [81.228.9.101]) by av6-2-sn3.vrr.skanova.net (Postfix) with ESMTP id 47EDF381E4 for ; Mon, 29 May 2006 08:23:53 +0200 (CEST) Received: from pelle (81-236-228-22-no37.tbcn.telia.com [81.236.228.22]) by smtp3-1-sn3.vrr.skanova.net (Postfix) with SMTP id 3AEDD37E48 for ; Mon, 29 May 2006 08:23:53 +0200 (CEST) From: "Pelle Andersson" To: Date: Mon, 29 May 2006 08:22:17 +0200 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Subject: Newsyslog problem using Apache 2.2.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 06:23:55 -0000 Hi List! Doesn't know if this is a FreeBSD error or a Apache error. Im using FreeBSD 4.10 PatchLevel #23. For a number of days ago i was sucessfully upgrading Apache from 2.0.x series to 2.2.x series. Everything worked perfekt except newsyslog. Im using the following in newsyslog.conf (worked perfect in Apache 2.0.x): /var/log/apache/*.log root:wheel 640 7 * $D05 GZB /var/run/httpd.pid 30 The error that returns is this: "newsyslog: log /var/log/apache/httpd-error.log.0 not compressed because daemon(s) not notified" "newsyslog: can't notify daemon, pid 30076: No such process" I also have some problem with SSL - but I don't know if these problems are related. I was using "passphrase exec:/dir/dir/..." - stoped working. Needed to change to "passphrase builtin" to get it work. Just a parenthesis of the above problem. BR, TIA - Pelle -- ---------------------------------------- I am using the free version of SPAMfighter for private users. It has removed 17 spam emails to date. Paying users do not have this message in their emails. Get the free SPAMfighter here: http://www.spamfighter.com/len From owner-freebsd-questions@FreeBSD.ORG Mon May 29 06:29:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6AA3816A7AD for ; Mon, 29 May 2006 06:29:28 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.187.76.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2BD543D48 for ; Mon, 29 May 2006 06:29:26 +0000 (GMT) (envelope-from m.seaman@infracaninophile.co.uk) Received: from [IPv6:::1] (localhost [IPv6:::1]) by smtp.infracaninophile.co.uk (8.13.6/8.13.6) with ESMTP id k4T6TJUA089657; Mon, 29 May 2006 07:29:20 +0100 (BST) (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <447A94BA.9000302@infracaninophile.co.uk> Date: Mon, 29 May 2006 07:29:14 +0100 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Stephen Hurd References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> <447A8B42.2060901@sasktel.net> In-Reply-To: <447A8B42.2060901@sasktel.net> X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/signed; micalg=pgp-ripemd160; protocol="application/pgp-signature"; boundary="------------enig3CC51A4B2841E627D47D72C3" X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0.2 (smtp.infracaninophile.co.uk [IPv6:::1]); Mon, 29 May 2006 07:29:20 +0100 (BST) X-Virus-Scanned: ClamAV 0.88.2/1494/Sun May 28 19:27:02 2006 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-2.6 required=5.0 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on happy-idiot-talk.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 06:29:28 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig3CC51A4B2841E627D47D72C3 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Stephen Hurd wrote: > Stephen Hurd wrote: >> So, I suppose my questions are these: >> 1) How do people cope with custom termcap entries? >> 2) Is there a *correct* way to cope with custom termcap entries? >> 3) Is there a good reason to not have /usr/share/misc/termcap be a >> symlink to /etc/termcap rather than the reverse which would allow >> mergemaster to Just Work? that is... putting it in /etc fixes a >> problem... does moving it create one or more more serious problems? >> 4) Am I supposed to submit every custom termcap tweak for inclusion in= >> the next release so I can keep using my terminals? > Anyone? I think you're not going to have much luck here. Custom termcap entries are not something that most FreeBSD users deal with and consequently ther= e does not seem to be any useful mechanism established for managing them. The curses(3X) man page seems to be they key reference. Particularly the section on environment variables: TERM, TERMCAP, TERMPATH. It does also mention the possibility of using ${HOME}/.termcap to hold supplement= ary termcap entries. However, these man pages are rather confusing: many of t= hem talk about terminfo(5) in terms of 'it is going to replace termcap(5) any= day now'. But terminfo(5) is a SysV-ism and supported only as a compatib= ility thing under FreeBSD. Most people will be perfectly happy with the default termcap database -- = so long as it provides xterm / vt100 and cons25 almost all situations are co= vered. For your purposes if using environment variables to achieve your ends tur= ns out not to be workable, then I'd suggest keeping a backup copy of your custom= ised termcap somewhere where system updates won't overwrite it -- keeping it in CVS or similar would be a good move -- and writing yourself a little script to merge in your changes to /usr/share/misc/termcap and then re-ru= n 'cap_mkdb /usr/share/misc/termcap' after a system update. I've a feeling= that /etc/termcap is there mostly for historical compatibility now-adays. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW --------------enig3CC51A4B2841E627D47D72C3 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD4DBQFEepS/8Mjk52CukIwRA8UXAJIDVeRc2rys+6Ryy7ZHYfO5LtfDAJ9jdvQ3 xX8U48qkM/kGf2yAp+9v0Q== =DHqa -----END PGP SIGNATURE----- --------------enig3CC51A4B2841E627D47D72C3-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 06:46:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1A99C16A899 for ; Mon, 29 May 2006 06:46:26 +0000 (UTC) (envelope-from shurd@sasktel.net) Received: from misav02.sasknet.sk.ca (misav09.sasknet.sk.ca [142.165.20.173]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3AE1D43D48 for ; Mon, 29 May 2006 06:46:25 +0000 (GMT) (envelope-from shurd@sasktel.net) Received: from bgmpomr2.sasknet.sk.ca ([142.165.72.23]) by misav09 with InterScan Messaging Security Suite; Mon, 29 May 2006 00:46:24 -0600 Received: from [192.168.0.193] ([142.165.59.202]) by bgmpomr2.sasknet.sk.ca (SaskTel eMessaging Service) with ESMTPA id <0J0000J84LHBW570@bgmpomr2.sasknet.sk.ca> for freebsd-questions@freebsd.org; Mon, 29 May 2006 00:46:24 -0600 (CST) Date: Mon, 29 May 2006 00:46:22 -0600 From: Stephen Hurd In-reply-to: <447A94BA.9000302@infracaninophile.co.uk> To: Matthew Seaman Message-id: <447A98BE.6030700@sasktel.net> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-15; format=flowed Content-transfer-encoding: 7BIT References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> <447A8B42.2060901@sasktel.net> <447A94BA.9000302@infracaninophile.co.uk> User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.1) Gecko/20060413 SeaMonkey/1.0 Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 06:46:33 -0000 Matthew Seaman wrote: > I think you're not going to have much luck here. Custom termcap entries > are not something that most FreeBSD users deal with and consequently there > does not seem to be any useful mechanism established for managing them. > Hrm... maybe if I raise a big enough stink termcap can be installed in /etc, managed by mergemaster, and everyone will go away happy... me because I have what I want and everyone else because I finalyl shut up. ;-) > The curses(3X) man page seems to be they key reference. Particularly > the section on environment variables: TERM, TERMCAP, TERMPATH. It does > also mention the possibility of using ${HOME}/.termcap to hold supplementary > termcap entries. However, these man pages are rather confusing: many of them > talk about terminfo(5) in terms of 'it is going to replace termcap(5) any > day now'. But terminfo(5) is a SysV-ism and supported only as a compatibility > thing under FreeBSD. > I'm fairly certain that anything the curses man pages have to say on the topic is wrong (and I dare you to read the terminfo manpage - it's been dead on my system for some time... but that's Ok, since it's not applicable). I believe that *BSD is the only platform using termcap with ncurses left on the planet. I use termcap(5) as my primary source, but have a firm belief that the last two thirds of the "CAVEATS AND BUGS" section is completely wrong. > Most people will be perfectly happy with the default termcap database -- so > long as it provides xterm / vt100 and cons25 almost all situations are covered. > Yeah. > For your purposes if using environment variables to achieve your ends turns out > not to be workable, then I'd suggest keeping a backup copy of your customised > termcap somewhere where system updates won't overwrite it -- keeping it > in CVS or similar would be a good move -- and writing yourself a little > script to merge in your changes to /usr/share/misc/termcap and then re-run > 'cap_mkdb /usr/share/misc/termcap' after a system update. I've a feeling that > /etc/termcap is there mostly for historical compatibility now-adays. > *nod* I've done a basic hack now and plastered stickynotes on all my systems with dumb terminals. We'll see how well that system works out. :-) I haven't yet found a way to use env variables (and haven't futzed around with ~/.termcap yet) with entries in /etc/ttys I suspect it won't work but I won't know until I beat myself to death with them. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 07:58:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 890A116A615 for ; Mon, 29 May 2006 07:58:23 +0000 (UTC) (envelope-from gil@asol.com.ph) Received: from mail.asol.com.ph (mx1.asol.com.ph [203.190.72.164]) by mx1.FreeBSD.org (Postfix) with SMTP id A364D43D48 for ; Mon, 29 May 2006 07:58:21 +0000 (GMT) (envelope-from gil@asol.com.ph) Received: (qmail 1433 invoked by uid 1010); 29 May 2006 07:50:33 -0000 Received: from 203.175.3.20 by mail.asol.com.ph (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/1356. spamassassin: 3.1.1. perlscan: 1.25-st-qms. Clear:RC:1(203.175.3.20):. Processed in 0.506717 secs); 29 May 2006 07:50:33 -0000 X-Antivirus-ASPI-Mail-From: gil@asol.com.ph via mail.asol.com.ph X-Antivirus-ASPI: 1.25-st-qms (Clear:RC:1(203.175.3.20):. Processed in 0.506717 secs Process 1427) Received: from iceman.onsite.at.pccb.com.ph (HELO louigi) (gil@asol.com.ph@203.175.3.20) by mail.asol.com.ph with SMTP; 29 May 2006 07:50:32 -0000 Message-ID: <002401c682f5$d8060770$1403afcb@louigi> From: "GiL Virtucio" To: "Malcolm Fitzgerald" References: <447A471C.9010402@cty-net.ne.jp> <7add8fd7934116927f294cd5f8a37e14@pacific.net.au> Date: Mon, 29 May 2006 15:59:40 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Cc: freebsd-questions@freebsd.org Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 07:58:29 -0000 There are a myriad of factors that could have caused those services to be inaccessible. First try to check if those services are running. Try sockstat -4 [gihl@BoK]~> sockstat -4 USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS root httpd 504 30 tcp4 *:80 *:* root sshd 474 3 tcp4 *:22 *:* if you don't see that :80 and :22 entry at the "LOCAL ADDRESS" column those services might not be running. If they are not running and you are sure that you have already installed apache from the ports collection, check your /etc/rc.conf file if you have these entries: sshd_enable="YES" apache_enable="YES" If they are both running this could be a problem in the configuration of your firewall. Also check the /etc/hosts file if you have an entry for your localhost. Maybe you're computer cannot open those services because your computer couldn't resolve the ip address of your localhost :) If it is still not working. hmmm. try to verify if the firewall is really the one causing the problem. Add the following line in your /etc/rc.conf file firewall_enable="YES" firewall_type="OPEN" if it works. change the firewall type to something more secure.. customize the /etc/rc.firewall and set the firewall_type to which ever setting you think would fit your needs :) hope this helps :) ======================================= Gil A. Virtucio Janitor/Kolektor/Messenger/Driver Asia Solution Phillippines Inc. 28/F Antel Global Corporate Center 3 Doña Julia Vargas Avenue, Ortigas Center, Pasig Mobile # : +63-916-3989695 ======================================= ----- Original Message ----- From: "Malcolm Fitzgerald" To: "freebsd-questions@FreeBSD. ORG" Sent: Monday, May 29, 2006 9:48 AM Subject: Re: troubleshooting network settings > > Malcolm Fitzgerald wrote: > >> I am running freeBSD v6.0 security on a home network behind an adsl > >> router. > >> I cannot connect to localhost from a browser (apache is running!) > >> I cannot connect to localhost port 22 (KPackage tries to use ssh) > >> What can cause these problems? How can I troubleshoot them? > >> I am very new to freeBSD, so part of my question is "where do I > >> begin?". I have a copy of Complete freeBSD beside me but can't get > >> the magical incantations right. Suggestions appreciated. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 09:28:51 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 76B2216A5F4 for ; Mon, 29 May 2006 09:28:51 +0000 (UTC) (envelope-from igorr@speechpro.com) Received: from speechpro.ru (speech-tech-2.ip.PeterStar.net [81.3.190.130]) by mx1.FreeBSD.org (Postfix) with ESMTP id EAD3F43D5C for ; Mon, 29 May 2006 09:28:49 +0000 (GMT) (envelope-from igorr@speechpro.com) Received: from [192.168.2.26] (helo=sysadm.stc) by s1.stc with esmtp (Exim 4.53 (FreeBSD)) id 1Fke3L-000FxN-Up for freebsd-questions@freebsd.org; Mon, 29 May 2006 13:28:48 +0400 Received: from localhost.stc ([127.0.0.1] helo=sysadm.stc) by sysadm.stc with esmtp (Exim 4.62 (FreeBSD)) (envelope-from ) id 1Fke45-000G5H-IT for freebsd-questions@freebsd.org; Mon, 29 May 2006 13:29:33 +0400 Received: (from igorr@localhost) by sysadm.stc (8.13.6/8.13.6/Submit) id k4T9TWM7061830 for freebsd-questions@freebsd.org; Mon, 29 May 2006 13:29:32 +0400 (MSD) (envelope-from igorr) Date: Mon, 29 May 2006 13:29:32 +0400 From: Igor Robul To: freebsd-questions@freebsd.org Message-ID: <20060529092932.GB61608@sysadm.stc> References: <20060525145312.50581.qmail@web53406.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060525145312.50581.qmail@web53406.mail.yahoo.com> User-Agent: Mutt/1.5.11 X-Archived: Yes Subject: Re: Spam problem! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 09:28:59 -0000 On Thu, May 25, 2006 at 07:53:12AM -0700, Olga Zenkova wrote: > mailboxes with field "To: user3" in it. There are no > user1 or user2 in this field. Is it possible to cut > off these letters? Especially it is difficult to > explain for user1 and user2 why they got letters > addressed not for them. Just show them Envelope-To: header in Outlook :-) At least my users can understand, that it is possible to write anything in various header. Also I use DSPAM (mail/dspam) for opt-in spam filtering and it works very well for users who care to train it. Plus I reject a lot of spam at incoming SMTP server. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 10:04:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A74B716A46B for ; Mon, 29 May 2006 10:04:44 +0000 (UTC) (envelope-from youshi10@u.washington.edu) Received: from mxout7.cac.washington.edu (mxout7.cac.washington.edu [140.142.32.178]) by mx1.FreeBSD.org (Postfix) with ESMTP id 455FE43D46 for ; Mon, 29 May 2006 10:04:44 +0000 (GMT) (envelope-from youshi10@u.washington.edu) Received: from smtp.washington.edu (smtp.washington.edu [140.142.32.139]) by mxout7.cac.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k4TA4haf019933 for ; Mon, 29 May 2006 03:04:43 -0700 X-Auth-Received: from [128.208.5.99] (nilakantha.cs.washington.edu [128.208.5.99]) (authenticated authid=youshi10) by smtp.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k4TA4hJk032390 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Mon, 29 May 2006 03:04:43 -0700 Message-ID: <447AC73A.8040306@u.washington.edu> Date: Mon, 29 May 2006 03:04:42 -0700 From: Garrett Cooper User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20060525145312.50581.qmail@web53406.mail.yahoo.com> <20060529092932.GB61608@sysadm.stc> In-Reply-To: <20060529092932.GB61608@sysadm.stc> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Uwash-Spam: Gauge=IIIIIII, Probability=7%, Report='__CT 0, __CTE 0, __CT_TEXT_PLAIN 0, __HAS_MSGID 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __SANE_MSGID 0, __STOCK_SUBJ_9 0, __USER_AGENT 0' Subject: Re: Spam problem! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 10:04:45 -0000 Igor Robul wrote: > On Thu, May 25, 2006 at 07:53:12AM -0700, Olga Zenkova wrote: > >> mailboxes with field "To: user3" in it. There are no >> user1 or user2 in this field. Is it possible to cut >> off these letters? Especially it is difficult to >> explain for user1 and user2 why they got letters >> addressed not for them. >> > Just show them Envelope-To: header in Outlook :-) > At least my users can understand, that it is possible to write anything > in various header. > > Also I use DSPAM (mail/dspam) for opt-in spam filtering and it works > very well for users who care to train it. > > Plus I reject a lot of spam at incoming SMTP server. > SMTP with SSL/TLS and authentication for a network works wonders.. blocks many unauthorized programs that utilize locally run SMTP servers (ie spyware, virii, etc). -Garrett From owner-freebsd-questions@FreeBSD.ORG Mon May 29 10:15:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4B6ED16A468 for ; Mon, 29 May 2006 10:15:26 +0000 (UTC) (envelope-from freebsd-listen@fabiankeil.de) Received: from smtprelay01.ispgateway.de (smtprelay01.ispgateway.de [80.67.18.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6C4D143D46 for ; Mon, 29 May 2006 10:15:25 +0000 (GMT) (envelope-from freebsd-listen@fabiankeil.de) Received: (qmail 19388 invoked from network); 29 May 2006 10:15:23 -0000 Received: from unknown (HELO localhost) ([pbs]775067@[217.50.128.134]) (envelope-sender ) by smtprelay01.ispgateway.de (qmail-ldap-1.03) with SMTP for ; 29 May 2006 10:15:23 -0000 Date: Mon, 29 May 2006 12:15:15 +0200 From: Fabian Keil Cc: freebsd-questions@freebsd.org Message-ID: <20060529121515.6b84a934@localhost> In-Reply-To: References: <20060528192121.GE50477@leia.lambermont.dyndns.org> X-Mailer: Sylpheed-Claws 2.1.1 (GTK+ 2.8.17; i386-portbld-freebsd6.1) X-PGP-KEY-URL: http://www.fabiankeil.de/gpg-keys/freebsd-listen-2006-08-19.asc User-Agent: 321 test Mime-Version: 1.0 Content-Type: multipart/signed; boundary="Sig_i0Cc4/9i8pF9Q57tlF8uUVL"; protocol="application/pgp-signature"; micalg=PGP-SHA1 Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 10:15:26 -0000 --Sig_i0Cc4/9i8pF9Q57tlF8uUVL Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable "Nikolas Britton" wrote: > On 5/28/06, Hans Lambermont wrote: > > What is the maximum file size on a dvd+r ? > > > > System : 5.4-RELEASE-p6 > > Command used : growisofs -Z /dev/cd0 -l -J -r burn/ > > In burn/ I have a backup file of size 4166629386 bytes and some > > smaller files. In total 4577410 kB. > > > > growisofs ends normally : > > 99.88% done, estimate finish Fri May 26 23:22:48 2006 > > Total translation table size: 0 > > Total rockridge attributes bytes: 519 > > Total directory bytes: 0 > > Path table size(bytes): 10 > > Max brk space used d724 > > 2287734 extents written (4468 MB) > > builtin_dd: 2287744*2KB out @ average 2.4x1385KBps > > /dev/pass0: flushing cache > > /dev/pass0: closing track > > /dev/pass0: closing session > > # echo $? > > 0 > > > > An 'ls -la' of the mounted dvd+r shows : > > ls: backup.bz2: Value too large to be stored in data type > > > > I can read the whole dvd without problems on a non-FreeBSD system. I > > cannot find a limit in GROWISOFS(1m) or MKISOFS(8), but on > > http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2005-12/msg01= 736.html > > I read about a 2 GB maximum filesize for a file on a dvd. Is this > > true ? If so I think it should be mentioned in GROWISOFS(1m). > > >=20 > FreeBSD's implementation is correct, Linux is the one that's wrong, > they decided to embrace and extend the standard. Theirs a 2GB cap per > file on DVDs. http://www.freebsd.org/cgi/query-pr.cgi?pr=3Dkern-91488: |The cd9660 filesystem can not handle files of more than 2147483647 bytes,= =20 |while the specification of the filesystem arguably allows for files up to= =20 |4294967295 bytes. (Specifically, the "32 bit quantity" is not specified as= =20 |signed or unsigned. In my opinion, since negative file sizes are not=20 |meaningfull, it should be interpreted as unsigned.) While I didn't read the spec, I heard that explanation before and I think it's entirely correct to assume that the file size value is unsigned. This has nothing to do with embracing standards. Fabian --=20 http://www.fabiankeil.de/ --Sig_i0Cc4/9i8pF9Q57tlF8uUVL Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEesm4jV8GA4rMKUQRAqjoAJ41cvZtL42vBgqAS0J3W7WyGXk8awCgiSNp Zi7iv7EJ59ZdfPOjD6oEdJY= =STsM -----END PGP SIGNATURE----- --Sig_i0Cc4/9i8pF9Q57tlF8uUVL-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 10:30:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2AC7D16A443 for ; Mon, 29 May 2006 10:30:23 +0000 (UTC) (envelope-from howie@thingy.com) Received: from mbox1.network-i.net (pop32.network-i.net [212.21.121.156]) by mx1.FreeBSD.org (Postfix) with SMTP id 618FC43D46 for ; Mon, 29 May 2006 10:30:21 +0000 (GMT) (envelope-from howie@thingy.com) Received: (qmail 88859 invoked by uid 0); 29 May 2006 10:30:20 -0000 Received: from unknown (HELO ?10.1.1.134?) (212.21.99.52) by newmail.network-i.net with SMTP; 29 May 2006 10:30:20 -0000 Message-ID: <447ACD15.1080201@thingy.com> Date: Mon, 29 May 2006 11:29:41 +0100 From: Howard Jones User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Fabian Keil , freebsd-questions@freebsd.org References: <20060528192121.GE50477@leia.lambermont.dyndns.org> <20060529121515.6b84a934@localhost> In-Reply-To: <20060529121515.6b84a934@localhost> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: [freebsd-questions] What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 10:30:23 -0000 Fabian Keil wrote: > While I didn't read the spec, I heard that explanation before and > I think it's entirely correct to assume that the file size value > is unsigned. This has nothing to do with embracing standards. > Just for another datapoint, Nero Burning ROM (onWindows) also limits files on an ISO DVD to 2GB. You must use UFS for larger files. These guys have been making CD/DVD burning software for some time. I suspect they know what they are doing. Best Regards, Howie From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:23:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 70EBD16A564 for ; Mon, 29 May 2006 11:23:34 +0000 (UTC) (envelope-from linstef@verat.net) Received: from smtp2.verat.net (smtp4.verat.net [85.222.160.134]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3B79D43D5D for ; Mon, 29 May 2006 11:23:29 +0000 (GMT) (envelope-from linstef@verat.net) Received: from localhost (localhost [127.0.0.1]) by smtp2.verat.net (Postfix) with ESMTP id 4612B1D0046 for ; Mon, 29 May 2006 13:23:26 +0200 (CEST) Received: from smtp2.verat.net ([127.0.0.1]) by localhost (smtp2.verat.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 09847-02 for ; Mon, 29 May 2006 13:23:26 +0200 (CEST) Received: by smtp2.verat.net (Postfix, from userid 505) id 250FC1CF58E; Mon, 29 May 2006 13:23:26 +0200 (CEST) X-Spam-Level: * X-Spam-Status: No, score=1.5 required=6.5 tests=BAYES_00,HTML_50_60, HTML_MESSAGE,RCVD_IN_NJABL_DUL,RCVD_IN_SORBS_DUL autolearn=no version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on linux.local Received: from AMD1700 (unknown [217.26.67.92]) by smtp2.verat.net (Postfix) with SMTP id 248DE1CF58E for ; Mon, 29 May 2006 13:23:25 +0200 (CEST) Message-ID: <000801c68312$4d2e5590$0201a8c0@AMD1700> From: "Stefi" To: "FreeBSD pitanja" Date: Mon, 29 May 2006 13:23:23 +0200 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Virus-Scanned: amavisd-new at verat.net Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:23:39 -0000 Hi everyone I have Gigabyte GN-WP01GS wireless card that works perfect under Widows = XP. It also can simula te an AP mode. FreeBSD 6 (on my machine) does not = recognize it at first. I found out how to recompile original driver for = use on FreeBSD with ndisgen. Everything works fine an I can see it like = ndis0 using ifconfig. But, I can't change any setting using ifconfig. I = can't access the card. Does anyone know how to configure that card correctly? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:36:18 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5ADE416A509 for ; Mon, 29 May 2006 11:36:18 +0000 (UTC) (envelope-from rob_27_preston@yahoo.co.uk) Received: from web25001.mail.ukl.yahoo.com (web25001.mail.ukl.yahoo.com [217.12.10.37]) by mx1.FreeBSD.org (Postfix) with SMTP id CC0CA43D53 for ; Mon, 29 May 2006 11:36:08 +0000 (GMT) (envelope-from rob_27_preston@yahoo.co.uk) Received: (qmail 5962 invoked by uid 60001); 29 May 2006 11:36:07 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Message-ID:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=3cS087TfrgqSwBPNBT9wzNLDr2xb3nKf5nYe5BGDuIT/F1ThUNw5NZGKGlzBxhakyYx4yHQF4qvyDQ8hBg/AMQf07ttVcTgxJt1mHHUC0mw4WEW9/WahJj+gm+8ajThaQPR0ccm7FSAl3AJm95BQ8fxDyScKmbqcRYuMtsscqis= ; Message-ID: <20060529113607.5960.qmail@web25001.mail.ukl.yahoo.com> Received: from [83.67.67.49] by web25001.mail.ukl.yahoo.com via HTTP; Mon, 29 May 2006 12:36:07 BST Date: Mon, 29 May 2006 12:36:07 +0100 (BST) From: Robert Davison To: Mikhail Goriachev In-Reply-To: <447A631E.2060504@webanoide.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:36:38 -0000 But the config settings I've seen all say that when using MailScanner, you must set the sendmail_enable to None. Even with this set to YES, then I still dont have the sendmail_out.pid and sendmail_in.pid files running. Mikhail Goriachev wrote: Robert Davison wrote: > I've done a bit more digging. It seems that my sendmail_in.pid and sendmail_out.pid files are not running in /var/run, despite having this in my rc.conf.. > > sendmail_enable="NONE" > clamd_enable="YES" > freshd_enable="YES" > mailscanner_enable="YES" > mta_enable="YES" > mta_type="sendmail" > mta_profiles="incoming outgoing submitqueue" > mta_incoming_flags="-L sm-mta-in -bd -OPrivacyOptions=noetrn -OQueueDirectory=/v > ar/spool/mqueue.in -ODeliveryMode=queueonly" > mta_incoming_pidfile="/var/run/sendmail_in.pid" > mta_incoming_configfile="/etc/mail/sendmail.cf" > mta_outgoing_flags="-L sm-mta-out -q15m" > mta_outgoing_pidfile="/var/run/sendmail_out.pid" > mta_outgoing_configfile="/etc/mail/sendmail.cf" > mta_submitqueue_flags="-L ms-msp-queue -Ac -q15m" > mta_submitqueue_pidfile="/var/spool/clientmqueue/sm-client.pid" > mta_submitqueue_configfile="/etc/mail/submit.cf" > > I'm getting a sendmail.pid file, but nothing more Well, this makes sense. Your sendmail is disabled: sendmail_enable="NONE" This is what you need: sendmail_enable="YES" Try that and see how it goes. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" Send instant messages to your online friends http://uk.messenger.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:46:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9E39C16A69A for ; Mon, 29 May 2006 11:46:03 +0000 (UTC) (envelope-from ltsampros@upnet.gr) Received: from mail.vivodinet.gr (mail5.vivodinet.gr [80.76.39.15]) by mx1.FreeBSD.org (Postfix) with SMTP id 453AA43D73 for ; Mon, 29 May 2006 11:46:01 +0000 (GMT) (envelope-from ltsampros@upnet.gr) Received: (qmail 2831 invoked from network); 29 May 2006 11:45:40 -0000 Received: from dsl-88-218-3-41.customers.vivodi.gr (HELO bifteki.lan) (88.218.3.41) by 0 with SMTP; 29 May 2006 11:45:40 -0000 Received: from bifteki.lan (localhost [127.0.0.1]) by bifteki.lan (8.13.6/8.13.6) with ESMTP id k4TBhIHZ004909 for ; Mon, 29 May 2006 14:43:19 +0300 (EEST) (envelope-from gaghiel@bifteki.lan) Received: (from gaghiel@localhost) by bifteki.lan (8.13.6/8.13.6/Submit) id k4TBhIfw004908 for freebsd-questions@freebsd.org; Mon, 29 May 2006 14:43:18 +0300 (EEST) (envelope-from gaghiel) Date: Mon, 29 May 2006 14:43:18 +0300 From: Tsampros Leonidas To: freebsd-questions@freebsd.org Message-ID: <20060529114318.GA4777@bifteki.lan> References: <20060528192121.GE50477@leia.lambermont.dyndns.org> <20060529121515.6b84a934@localhost> <447ACD15.1080201@thingy.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-7 Content-Disposition: inline In-Reply-To: <447ACD15.1080201@thingy.com> User-Agent: Mutt/1.5.11 Subject: Re: [freebsd-questions] What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:46:17 -0000 On Mon, May 29, 2006 at 11:29:41AM +0100, Howard Jones wrote: > Fabian Keil wrote: > >While I didn't read the spec, I heard that explanation before and > >I think it's entirely correct to assume that the file size value > >is unsigned. This has nothing to do with embracing standards. > > > Just for another datapoint, Nero Burning ROM (onWindows) also limits > files on an ISO DVD to 2GB. You must use UFS for larger files. These > guys have been making CD/DVD burning software for some time. I suspect > they know what they are doing. The problem in FreeBSD is that you can mount succesfully any UDF dvd (at least, i have been sucessfull with this one) with mount_udf but you cannot create such a filesystem with a tool like mkudffs. Are there any plans for such a tool ? > Best Regards, > > Howie > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:48:01 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CE58F16A6DA for ; Mon, 29 May 2006 11:48:01 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.172]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0009443D70 for ; Mon, 29 May 2006 11:47:56 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so56509uge for ; Mon, 29 May 2006 04:47:55 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=NiEE415shOBGvQZ7ZXE+aJ9iIF4Z0H5cISNqF8lyEm4d3XBczXGcclrslvBq26oFOywELCFxi9D6FJoV+1d8IUeA5k281GtWe+Bo/ifvJzPzrltBKU+C7JJYlngEJD+t/Flufld7g8eSr+/EOYZiCR19w5G8BHyLpp0Us3ZGnFs= Received: by 10.78.32.16 with SMTP id f16mr355322huf; Mon, 29 May 2006 04:47:55 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Mon, 29 May 2006 04:47:55 -0700 (PDT) Message-ID: <18e02bd30605290447p7d50af00w31da94423e00638a@mail.gmail.com> Date: Mon, 29 May 2006 14:47:55 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <20060528170113.4de3f07d@vixen42.vulpes> MIME-Version: 1.0 References: <18e02bd30605281044v3c18527du99af188526959dc1@mail.gmail.com> <20060528170113.4de3f07d@vixen42.vulpes> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: Disk Compression X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:48:15 -0000 fre On 5/29/06, Vulpes Velox wrote: > > On Sun, 28 May 2006 13:15:17 -0500 > "Nikolas Britton" wrote: > > > On 5/28/06, Iantcho Vassilev wrote: > > > I am not aware of this feature.. > > > > > > > That's what I thought... What compression methods are there for > > *NIX? I need to backup about 1.33TB of data to a 1TB array. > > If it is just backing up, tar works nicely. > Here is the thing: http://people.freebsd.org/~fjoe/geom_ugz/ :) From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:51:05 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 337B716A4DA for ; Mon, 29 May 2006 11:51:05 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.168]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7CC4943D62 for ; Mon, 29 May 2006 11:50:57 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so57354uge for ; Mon, 29 May 2006 04:50:56 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=ZD7UAQnEp/M5KssYyKm23HUsINr6b60HxknJJecw37N5Y8Yub+Mg3QI9qxkbCVWN3YDS9vHd14WE38LLRrb/1KUMEN2/AMB2WV7ND6NCVUJr9wQlNop/ZuKnMd+vdtRW+5d7sy7B+OT3JGERCeFySxZu8l6YokLeM/GYSsOIjeY= Received: by 10.78.45.13 with SMTP id s13mr355048hus; Mon, 29 May 2006 04:43:46 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Mon, 29 May 2006 04:43:46 -0700 (PDT) Message-ID: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> Date: Mon, 29 May 2006 14:43:46 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: geli resilience to power outages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:51:11 -0000 Hi guys, DO someone know if and how GELI is resilience to power outages? Does the box is still encrypted? After reboot what would happen to fcsk? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 11:58:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3EA6916A7F8 for ; Mon, 29 May 2006 11:58:09 +0000 (UTC) (envelope-from andy@triera.net) Received: from deliver-1.mx.triera.net (deliver-1.mx.triera.net [213.161.0.31]) by mx1.FreeBSD.org (Postfix) with ESMTP id C445A43D72 for ; Mon, 29 May 2006 11:58:08 +0000 (GMT) (envelope-from andy@triera.net) Received: from localhost (in-1.mx.triera.net [213.161.0.25]) by deliver-1.mx.triera.net (Postfix) with ESMTP id A109BC03A for ; Mon, 29 May 2006 13:58:00 +0200 (CEST) Received: from smtp.triera.net (smtp.triera.net [213.161.0.30]) by in-1.mx.triera.net (Postfix) with SMTP id 4AE171BC081 for ; Mon, 29 May 2006 13:58:03 +0200 (CEST) Received: from webmail.triera.net (scandal.triera.net [213.161.0.40]) by smtp.triera.net (Postfix) with SMTP id 64FD01A18A5 for ; Mon, 29 May 2006 13:58:03 +0200 (CEST) MIME-Version: 1.0 X-Mailer: Triera Internet Webmail Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-ID: Date: Mon, 29 May 2006 13:58:02 +0200 From: "Andy Rozman (Aleksander)" To: freebsd-questions@freebsd.org X-Originating-IP: [212.152.181.180] X-Virus-Scanned: Triera AV Service Subject: corruption problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: andy@triera.net List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 11:58:14 -0000 Hi ! I have FreeBSD 6.1 installed with big disk (300 Gb). FreeBSD is working fine, but I noticed that some files become corrupt. I have about 80 Gb partioned for FreeBSD and other space is divided into 3 dos (fat32) partitions. I have some jar files on one of this "dos" disks, and javac notices at some times that .jar files have become corrupt. If I replace this files then everything starts working ok. Has somebody else come accross this problem, or something similar? At this time I am running only FreeBSD on my machine, but if this problem persists I will have to install Windows again. Oh yes. My system is running AMD X2, but I am still running under i386 kernel image, because I have some problems compiling amd64... Please help Andy P.S.: Please CC to my address, sicne I am only on digest list... From owner-freebsd-questions@FreeBSD.ORG Mon May 29 12:00:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 79B2716A8B0 for ; Mon, 29 May 2006 12:00:11 +0000 (UTC) (envelope-from asanjuan@bolsabilbao.es) Received: from correo-2.bolsabilbao.es (eu77-209.clientes.euskaltel.es [212.8.77.209]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4A63243D66 for ; Mon, 29 May 2006 12:00:02 +0000 (GMT) (envelope-from asanjuan@bolsabilbao.es) Received: from correo_6.bolsabilbao.es ([10.33.5.206]) by correo-2.bolsabilbao.es with Microsoft SMTPSVC(6.0.3790.1830); Mon, 29 May 2006 14:00:01 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Mon, 29 May 2006 13:59:59 +0200 Message-ID: <6FA4E8E8A0FAD64F9AF5A1F0FDB8C6EE1211@BB06.bolsabilbao.local> Content-Class: urn:content-classes:message X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2663 X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Restrict access to custom shell scripts thread-index: AcaDF2kLGXu1eHE3QXi6SZUi72ko+Q== From: "Aitor San Juan" To: Importance: normal Priority: normal X-OriginalArrivalTime: 29 May 2006 12:00:01.0074 (UTC) FILETIME=[69E50120:01C68317] X-ExchangeSecure-AntiSpam: valid(0) Subject: Restrict access to custom shell scripts X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 12:00:18 -0000 Hi list! I have developped several Bourne shell scripts that help some users to accomplish general tasks by choosing an option from a list of = options. Such options include, for example, displaying the size of filesystems, (un)mounting filesystems, user account management (add/remove/lock = users, etc). As you can imagine, many of these options will require the user to have superuser authorisations. It would be desirable that only a few users have the permission to = execute these shell scripts. Following are my 2 approaches. I don't know which = is the best. In addition, but I need some further help details of how to accomplish it, so any hint or suggestion would be highly appreciated. Thanks in advance. ----------- APPROACH 1: ----------- Make root the owner of these shell scripts (rwx). Create a group and = make the shell scripts only executable for users belonging to this new group = (r-x). For the rest of the world, no permissions. Until here, I see apparently = no problems. But what about the permissions to execute some of the commands encapsulated by the shell scripts? For example, adding users, editing = crontabs of other users, (un)mounting filesystems... I wouldn't like the users = belonging to this new group to have/belong directly root permissions. ----------- APPROACH 2: ----------- Create a special user whose shell entry could be the main shell script = (the one who shows the menu of options), that is, no /bin/sh entry or alike, = instead the full path to the script who shows the main menu. Then the users = should be allowed to change their ID to this special user (using su for example). = Again, once su'ed to this user, what the superuser permissions required by most = of the options showed in the menu? ************ LEGEZKO OHARRA / AVISO LEGAL / LEGAL ADVICE *************=20 Mezu honek isilpeko informazioa gorde dezake, edo jabea duena, edota = legez babestuta dagoena. Zuri zuzendua ez bada, bidali duenari esan eta = ezabatu, inori berbidali edo gorde gabe, legeak debekatzen duelako = mezuak erabiltzea baimenik gabe.=20 -------------------------------------------------------------------------= - Este mensaje puede contener informaci=F3n confidencial, en propiedad o = legalmente protegida. Si usted no es el destinatario, le rogamos lo = comunique al remitente y proceda a borrarlo, sin reenviarlo ni = conservarlo, ya que su uso no autorizado est=E1 prohibido legalmente. -------------------------------------------------------------------------= - This message may contain confidential, proprietary or legally privileged = information. If you are not the intended recipient of this message, = please notify it to the sender and delete without resending or backing = it, as it is legally prohibited. *************************************************************************= * From owner-freebsd-questions@FreeBSD.ORG Mon May 29 12:11:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 32E7816AA8C for ; Mon, 29 May 2006 12:11:35 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id C276143D55 for ; Mon, 29 May 2006 12:11:34 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fkgaq-0005eo-Hh; Mon, 29 May 2006 08:11:32 -0400 Message-ID: <447AE4EF.50408@webanoide.org> Date: Mon, 29 May 2006 22:11:27 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Robert Davison References: <20060529113607.5960.qmail@web25001.mail.ukl.yahoo.com> In-Reply-To: <20060529113607.5960.qmail@web25001.mail.ukl.yahoo.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 12:12:12 -0000 Robert Davison wrote: > But the config settings I've seen all say that when using MailScanner, you must set the sendmail_enable to None. > > Even with this set to YES, then I still dont have the sendmail_out.pid and sendmail_in.pid files running. > Oops... I'm not familiar with MailScanner. I just assumed, based on your log, that sendmail is the epicentre of your problem. I reckon someone else would be able to help you. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Mon May 29 12:32:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B8E6616A4F3 for ; Mon, 29 May 2006 12:32:25 +0000 (UTC) (envelope-from xfb52@dial.pipex.com) Received: from smtp-out2.blueyonder.co.uk (smtp-out2.blueyonder.co.uk [195.188.213.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 51F7243D53 for ; Mon, 29 May 2006 12:32:24 +0000 (GMT) (envelope-from xfb52@dial.pipex.com) Received: from [172.23.170.139] (helo=anti-virus01-10) by smtp-out2.blueyonder.co.uk with smtp (Exim 4.52) id 1Fkgv1-0005aT-8d; Mon, 29 May 2006 13:32:23 +0100 Received: from [82.41.33.243] (helo=[192.168.0.2]) by asmtp-out5.blueyonder.co.uk with esmtp (Exim 4.52) id 1Fkgup-00034k-JT; Mon, 29 May 2006 13:32:11 +0100 Message-ID: <447AE9CB.1070606@dial.pipex.com> Date: Mon, 29 May 2006 13:32:11 +0100 From: Alex Zbyslaw User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-GB; rv:1.7.13) Gecko/20060515 X-Accept-Language: en MIME-Version: 1.0 To: Aitor San Juan References: <6FA4E8E8A0FAD64F9AF5A1F0FDB8C6EE1211@BB06.bolsabilbao.local> In-Reply-To: <6FA4E8E8A0FAD64F9AF5A1F0FDB8C6EE1211@BB06.bolsabilbao.local> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Restrict access to custom shell scripts X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 12:32:30 -0000 Aitor San Juan wrote: >Hi list! > >I have developped several Bourne shell scripts that help some users >to accomplish general tasks by choosing an option from a list of options. >Such options include, for example, displaying the size of filesystems, >(un)mounting filesystems, user account management (add/remove/lock users, etc). >As you can imagine, many of these options will require the user to have >superuser authorisations. > >It would be desirable that only a few users have the permission to execute >these shell scripts. Following are my 2 approaches. I don't know which is >the best. In addition, but I need some further help details of how to >accomplish it, so any hint or suggestion would be highly appreciated. > > sudo. It's in the ports. You could fix your shell script permissions to be r-x root-only, but any operations requiring root access will just not work if a regular user runs it, so value is limited. --Alex From owner-freebsd-questions@FreeBSD.ORG Mon May 29 12:32:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3C7A016A533 for ; Mon, 29 May 2006 12:32:32 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from betty.computinginnovations.com (dsl081-142-072.chi1.dsl.speakeasy.net [64.81.142.72]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9025B43D53 for ; Mon, 29 May 2006 12:32:27 +0000 (GMT) (envelope-from derek@computinginnovations.com) Received: from p17.computinginnovations.com (dhcp-10-20-30-100.computinginnovations.com [10.20.30.100]) (authenticated bits=0) by betty.computinginnovations.com (8.13.6/8.12.11) with ESMTP id k4TCW3nP000831; Mon, 29 May 2006 07:32:04 -0500 (CDT) Message-Id: <6.0.0.22.2.20060529071800.026a4d40@mail.computinginnovations.com> X-Sender: derek@mail.computinginnovations.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Mon, 29 May 2006 07:31:52 -0500 To: Robert Davison , freebsd-questions@freebsd.org From: Derek Ragona In-Reply-To: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> References: <20060528185704.43387.qmail@web25010.mail.ukl.yahoo.com> Mime-Version: 1.0 X-ComputingInnovations-MailScanner-Information: Please contact the ISP for more information X-ComputingInnovations-MailScanner: Found to be clean X-ComputingInnovations-MailScanner-From: derek@computinginnovations.com X-Spam-Status: No Content-Type: text/plain; charset="us-ascii"; format=flowed X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: Sendmail / Mailscanner issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 12:32:35 -0000 I think you may need to change the way sendmail starts. rc script for sendmail changed in 6.X so you may not have one of the additional queues running. -Derek At 01:57 PM 5/28/2006, Robert Davison wrote: >I've installed sendmail on a 6.1 system. It will send mail internally and >externally with no problem. I've now put MailScanner into the mix. I've >done what I believe to be the necessary configuration, but am getting the >following error in the maillog file.... > > May 29 20:47:51 luey MailScanner[540]: MailScanner E-Mail Virus Scanner > version 4.50.15 starting... >May 29 20:47:51 luey MailScanner[540]: Read 701 hostnames from the >phishing whitelist >May 29 20:47:51 luey MailScanner[540]: Using SpamAssassin results cache >May 29 20:47:51 luey MailScanner[540]: Connected to SpamAssassin cache >database >May 29 20:47:51 luey MailScanner[540]: Enabling SpamAssassin >auto-whitelist functionality... >May 29 20:47:53 luey MailScanner[540]: ClamAV scanner using unrar command >/usr/local/bin/unrar >May 29 20:47:53 luey MailScanner[540]: Using locktype = flock >May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: from=root, size=37, >class=0, nrcpts=1, msgid=<200605291950.k4TJo27K000552@luey.casezero.net>, >relay=root@localhost >May 29 20:50:02 luey sendmail[552]: k4TJo27K000552: to=rob_27ma, >ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, >pri=30037, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: >Connection refused by [127.0.0.1] > > Can anyone identify from this what is causing the connection to be > refused ?? > >Send instant messages to your online friends http://uk.messenger.yahoo.com >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >-- >This message has been scanned for viruses and >dangerous content by MailScanner, and is >believed to be clean. >MailScanner thanks transtec Computers for their support. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 12:45:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 960E516AB5F for ; Mon, 29 May 2006 12:45:22 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.171]) by mx1.FreeBSD.org (Postfix) with ESMTP id EE20643D53 for ; Mon, 29 May 2006 12:45:21 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so73784uge for ; Mon, 29 May 2006 05:45:20 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=rTDj1euiAcay/uXtlU1arxg/msYXmBVGN/l5/shSb8/glsjl8e8IrjFu3J12UsRjT73XCtx+FWo4g9xx4TPvt1vgAJizPJv6dYrgWb3Qloc7snCO2SjW03qkr2PKuTp/p55JYZH3d3THnsYcC9eSZiNRlpkzE6UJ/XvawhmvASk= Received: by 10.78.52.17 with SMTP id z17mr361517huz; Mon, 29 May 2006 05:45:20 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Mon, 29 May 2006 05:45:20 -0700 (PDT) Message-ID: <18e02bd30605290545j1c9cceebwedc8d28bbf270e11@mail.gmail.com> Date: Mon, 29 May 2006 15:45:20 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: kern.ipc.somaxconn should be high for a PF firewall with a lot of states X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 12:45:29 -0000 kern.ipc.somaxconn is for handling more incoming connections,right? but does firewall connections are considered incoming? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:11:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8336616A5EA for ; Mon, 29 May 2006 13:11:22 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9D50A43D78 for ; Mon, 29 May 2006 13:11:13 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 4398 invoked from network); 29 May 2006 23:11:11 +1000 Received: from 203-217-63-189.dyn.iinet.net.au (HELO localhost) (203.217.63.189) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 29 May 2006 23:11:11 +1000 Date: Mon, 29 May 2006 23:11:07 +1000 From: Norberto Meijome To: Subhro Message-ID: <20060529231107.5da40196@localhost> In-Reply-To: References: X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: FreeBSD Questions Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:11:23 -0000 On Mon, 29 May 2006 11:48:51 +0530 Subhro wrote: > I am running FreeBSD-6.1-STABLE. I was trying to compile OpenOffice > 2.0 from the ports tree. Below I have mentioned the error I am > getting. Can anyone please tell me whats wrong? i dont know...but why do you build this beast when it's already provided as a package? Beto From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:13:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B753A16A6EF for ; Mon, 29 May 2006 13:13:03 +0000 (UTC) (envelope-from mark@msen.com) Received: from rwcrmhc11.comcast.net (rwcrmhc11.comcast.net [204.127.192.81]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7765043D6B for ; Mon, 29 May 2006 13:13:01 +0000 (GMT) (envelope-from mark@msen.com) Received: from alphaone.psyberation.com (c-68-61-202-251.hsd1.mi.comcast.net[68.61.202.251]) by comcast.net (rwcrmhc11) with ESMTP id <20060529131300m1100k1ao7e>; Mon, 29 May 2006 13:13:00 +0000 From: Mark Moellering To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 09:12:49 -0400 User-Agent: KMail/1.9.1 References: <000801c68312$4d2e5590$0201a8c0@AMD1700> In-Reply-To: <000801c68312$4d2e5590$0201a8c0@AMD1700> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605290912.49807.mark@msen.com> Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:13:04 -0000 Do you still have the wlan device compiled in the kernel? I would also make sure to remove the ral device, as this is for the same chipset family but your card uses a newer version that the native ral driver does not support but I could imagine it might create difficulties. All I can think of... Mark Moellering On Monday 29 May 2006 7:23 am, Stefi wrote: > Hi everyone > > I have Gigabyte GN-WP01GS wireless card that works perfect under Widows XP. > It also can simula te an AP mode. FreeBSD 6 (on my machine) does not > recognize it at first. I found out how to recompile original driver for use > on FreeBSD with ndisgen. Everything works fine an I can see it like ndis0 > using ifconfig. But, I can't change any setting using ifconfig. I can't > access the card. > > Does anyone know how to configure that card correctly? > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:15:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43D3116A817 for ; Mon, 29 May 2006 13:15:35 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7431543D66 for ; Mon, 29 May 2006 13:15:31 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 4596 invoked from network); 29 May 2006 23:15:30 +1000 Received: from 203-217-63-189.dyn.iinet.net.au (HELO localhost) (203.217.63.189) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 29 May 2006 23:15:30 +1000 Date: Mon, 29 May 2006 23:15:24 +1000 From: Norberto Meijome To: "Iantcho Vassilev" Message-ID: <20060529231524.0f76b3ba@localhost> In-Reply-To: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> References: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: FreeBSD Mailing List Subject: Re: geli resilience to power outages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:15:39 -0000 On Mon, 29 May 2006 14:43:46 +0300 "Iantcho Vassilev" wrote: > DO someone know if and how GELI is resilience to power outages? > > Does the box is still encrypted? After reboot what would happen to fcsk? Hi Iantcho , I dont know for a fact the effect with a power outage, but I use it quite a lot on laptops (which a) freeze sometimes out of nowhere , and b) sometimes dont resume properly,). In both situations, I've usually had geli mounted disks (1 x 6 GB, 1 x 500 MB) running when the events happened. ( as well as a 4 GB swap which is also GELI backed) They (touch wood) haven't suffered data loss. /usr and /var seem be more affected by this ungraceful shutdowns than the .eli devices. I suppose it's all cool thanks to soft-updates, and the fact that GELI encrypts on a per block basis (yeah, no more pgp-busted disks like in Windows :) ). good luck, Beto From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:37:40 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0F9A116A884 for ; Mon, 29 May 2006 13:37:40 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5870443D5A for ; Mon, 29 May 2006 13:37:32 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4TDbSpV023689; Mon, 29 May 2006 08:37:29 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447AF91C.10106@daleco.biz> Date: Mon, 29 May 2006 08:37:32 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Malcolm Fitzgerald References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> In-Reply-To: <8f8af4261e016d4487bb94952df8157c@pacific.net.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:37:47 -0000 Malcolm Fitzgerald wrote: > > On 29/05/2006, at 1:10 PM, Kevin Kinsey wrote: > >> Malcolm Fitzgerald wrote: >>> I am running freeBSD v6.0 security on a home network behind an adsl >>> router. I cannot connect to localhost from a browser (apache is running!) >>> I cannot connect to localhost port 22 (KPackage tries to use ssh) >>> What can cause these problems? How can I troubleshoot them? >>> I am very new to freeBSD, so part of my question is "where do I >>> begin?". I have a copy of Complete freeBSD beside me but can't get >>> the magical incantations right. Suggestions appreciated. >> >> New to "Nix like" systems in general, or just new to FreeBSD? >> >> Here are a few suggestions ... no "magic bullet" here, though: >> >> First, check to see if the interface exists: >> >> $ ifconfig lo0 >> lo0: flags=8049 mtu 16384 >> inet6 ::1 prefixlen 128 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 >> inet 127.0.0.1 netmask 0xff000000 >> >> So, we have a loopback interface (in this case on both IPv4 >> and IPv6). > > bsd-box# ifconfig -a > rl0: flags=8843 mtu 1500 > options=8 > inet6 fe80::2e0:4cff:fe08:e02a%rl0 prefixlen 64 scopeid 0x1 > inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255 > ether 00:e0:4c:08:e0:2a > media: Ethernet autoselect (100baseTX ) > status: active > plip0: flags=108810 mtu 1500 > lo0: flags=8008 mtu 16384 Hmm, is that all? Unusual; I'd think the loopback _should_ be set up correctly. `ifconfig lo0 -inet 127.0.0.1 netmask 255.255.255.0` ?? If that fixes it, then we have to figure out *why* it's not being doing automatically. Problem during init/rc, most likely ... weird. KDK From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:51:38 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ECA6A16AC87 for ; Mon, 29 May 2006 13:51:38 +0000 (UTC) (envelope-from kyrreny@broadpark.no) Received: from osl1smout1.broadpark.no (osl1smout1.broadpark.no [80.202.4.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0EE2143D4C for ; Mon, 29 May 2006 13:51:36 +0000 (GMT) (envelope-from kyrreny@broadpark.no) Received: from osl1sminn1.broadpark.no ([80.202.4.59]) by osl1smout1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J0100H4T55YOXE0@osl1smout1.broadpark.no> for questions@freebsd.org; Mon, 29 May 2006 15:51:35 +0200 (CEST) Received: from urban.broadpark.no ([80.203.212.30]) by osl1sminn1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J0100K9R4YI7A60@osl1sminn1.broadpark.no> for questions@freebsd.org; Mon, 29 May 2006 15:47:15 +0200 (CEST) Date: Mon, 29 May 2006 15:47:16 +0200 From: Kyrre Nygard In-reply-to: <447820FD.5000602@dienub.org> To: "Daniel A." Message-id: <7.0.1.0.2.20060529154039.0225aa68@broadpark.no> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Version 7.0.1.0 Content-type: text/plain; charset=us-ascii; format=flowed Content-transfer-encoding: 7BIT References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <447820FD.5000602@dienub.org> Cc: questions@freebsd.org Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:51:49 -0000 At 11:50 27.05.2006, Daniel A. wrote: >Hi Kyrre. > >Have you tried chmodding the www dir to be group-writable? > >Also, as someone else has suggested, SVN og CVS might be a good >idea. They would not solve the problem you have right now, but they >might help you avoid some possible problems with many people editing >the same batch of files - sharing violations. What if two people >start editing the same files on their own workstations, and both >upload the changes? What about version control? et cetera, ad nauseam. > >Offcourse, non-repository development is possible, and I've done it >myself without any issues whatsoever, but you're the one who decides >what's best for your development. Actually no I did not chmod www to be group writable. Silly me! :) But I'm wondering. If I were to use SVN for my www, wouldn't I then in reality have two different wwws, one for SVN and one which I later export for Apache? This is what confuses me a little ... Thanks a lot, Kyrre From owner-freebsd-questions@FreeBSD.ORG Mon May 29 13:56:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1CA9516AD29 for ; Mon, 29 May 2006 13:56:27 +0000 (UTC) (envelope-from benlutz@datacomm.ch) Received: from xsmtp1.ethz.ch (xsmtp1.ethz.ch [82.130.70.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4401543D79 for ; Mon, 29 May 2006 13:56:17 +0000 (GMT) (envelope-from benlutz@datacomm.ch) Received: from xfe0.d.ethz.ch ([82.130.124.40]) by xsmtp1.ethz.ch with Microsoft SMTPSVC(6.0.3790.2499); Mon, 29 May 2006 15:56:16 +0200 Received: from vpn-global-045-dhcp.ethz.ch ([129.132.211.45]) by xfe0.d.ethz.ch over TLS secured channel with Microsoft SMTPSVC(6.0.3790.2499); Mon, 29 May 2006 15:56:16 +0200 From: Benjamin Lutz To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 15:56:12 +0200 User-Agent: KMail/1.8.3 References: <44785997.9020209@thechristies.net> In-Reply-To: <44785997.9020209@thechristies.net> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart4659606.AOcoHOIq45"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605291556.16084.benlutz@datacomm.ch> X-OriginalArrivalTime: 29 May 2006 13:56:16.0186 (UTC) FILETIME=[A762A1A0:01C68327] Cc: Pete C Subject: Re: min disk size for (useful) desktop X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 13:56:33 -0000 --nextPart4659606.AOcoHOIq45 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Saturday 27 May 2006 15.52, Pete C wrote: > . . . looking for advice/guidelines for a minimum disk size for a decent > desktop install of 6-stable with gnome, openoffice, firefox, gimp etc. . > . . > > . . . I have both a 20G and a 250G on hand, so I guess the question > really is is 20G enough ? ? ? I've been running a complete system with KDE, OOo, Gimp etc on my laptop on= a=20 7GB partition for 3 years. It does require some cleaning up every so often= =20 (remove distfiles etc), but it's enough. So 20GB should be plenty. =46or things that need a lot of space to build (OOo), you can use binary=20 packages. Cheers Benjamin --nextPart4659606.AOcoHOIq45 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQBEev2AgShs4qbRdeQRAjpfAJ0bFtZdVXaMawRD+cz8Rr/v7+J12wCfQ4dM Hh531CFWao7w50ltX8hMj4I= =JjGg -----END PGP SIGNATURE----- --nextPart4659606.AOcoHOIq45-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 14:18:06 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C6F216B071 for ; Mon, 29 May 2006 14:18:06 +0000 (UTC) (envelope-from freigedo@gmail.com) Received: from hu-out-0102.google.com (hu-out-0102.google.com [72.14.214.198]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5E7C043D53 for ; Mon, 29 May 2006 14:18:05 +0000 (GMT) (envelope-from freigedo@gmail.com) Received: by hu-out-0102.google.com with SMTP id 28so473492hug for ; Mon, 29 May 2006 07:18:04 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=d2mj9oWtlFtlpB1osY/KM1GH8j1Pk7El4YzGshNwsu3AFxORsJcZ8TIW4Qb4eoUkQQ6tQPtU91kbyfazgviKzxh0prvsnioC+WFw+c93PlkYTJ91CvlRtYW51p5P78DiLuBs5k6UqM9lsedR3LCpEjlzzs/1d4M2XMWJ2Jzp11w= Received: by 10.35.34.18 with SMTP id m18mr1983242pyj; Mon, 29 May 2006 07:10:52 -0700 (PDT) Received: by 10.35.91.5 with HTTP; Mon, 29 May 2006 07:10:52 -0700 (PDT) Message-ID: <5b028b0a0605290710k3e2ef279y178883b91f947a8a@mail.gmail.com> Date: Mon, 29 May 2006 16:10:52 +0200 From: "Federico Freigedo" To: questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Hi there, I got some questions if I may X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 14:18:11 -0000 Hi there I would like to ask you some questions if I may.. Im wanna make a server for a site like friendster.com and I am very interested of using FreeBSD as my SO on my server but I got some problems first I notice that FreeBSD does not detected the new SATA hard drives only IDE HD, also that I found it very complicate to administrate and to install there is a new good manual to use as reference to learn how to use this fantastic SO as a newbi= e so people could learn how to use it, administrate and install.?? please I would like to you to answer my questions if u can, thanks you regards federico From owner-freebsd-questions@FreeBSD.ORG Mon May 29 14:37:14 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6ED4816A5C7 for ; Mon, 29 May 2006 14:37:14 +0000 (UTC) (envelope-from alive@dienub.org) Received: from pfepc.post.tele.dk (pfepc.post.tele.dk [195.41.46.237]) by mx1.FreeBSD.org (Postfix) with ESMTP id 10D1943D46 for ; Mon, 29 May 2006 14:37:13 +0000 (GMT) (envelope-from alive@dienub.org) Received: from m00h.dienub.org (dienub.org [87.49.144.133]) by pfepc.post.tele.dk (Postfix) with ESMTP id 73C438A005D; Mon, 29 May 2006 16:37:12 +0200 (CEST) Received: from [192.168.0.2] (unknown [192.168.0.2]) by m00h.dienub.org (Postfix) with ESMTP id 1EA921CC22; Mon, 29 May 2006 16:37:02 +0200 (CEST) Message-ID: <447B0707.3050305@dienub.org> Date: Mon, 29 May 2006 16:36:55 +0200 From: "Daniel A." User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Kyrre Nygard References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <447820FD.5000602@dienub.org> <7.0.1.0.2.20060529154039.0225aa68@broadpark.no> In-Reply-To: <7.0.1.0.2.20060529154039.0225aa68@broadpark.no> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 14:37:16 -0000 Kyrre Nygard wrote: > At 11:50 27.05.2006, Daniel A. wrote: >> Hi Kyrre. >> >> Have you tried chmodding the www dir to be group-writable? >> >> Also, as someone else has suggested, SVN og CVS might be a good idea. >> They would not solve the problem you have right now, but they might >> help you avoid some possible problems with many people editing the >> same batch of files - sharing violations. What if two people start >> editing the same files on their own workstations, and both upload the >> changes? What about version control? et cetera, ad nauseam. >> >> Offcourse, non-repository development is possible, and I've done it >> myself without any issues whatsoever, but you're the one who decides >> what's best for your development. > > Actually no I did not chmod www to be group writable. > > Silly me! :) > > But I'm wondering. If I were to use SVN for my www, wouldn't I then in > reality > have two different wwws, one for SVN and one which I later export for > Apache? That is exactly how it does work ;) > > This is what confuses me a little ... > > Thanks a lot, > Kyrre From owner-freebsd-questions@FreeBSD.ORG Mon May 29 15:04:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E77416A6DA for ; Mon, 29 May 2006 15:04:28 +0000 (UTC) (envelope-from benlutz@datacomm.ch) Received: from maxlor.mine.nu (c-213-160-32-54.customer.ggaweb.ch [213.160.32.54]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7CA6943D6E for ; Mon, 29 May 2006 15:04:14 +0000 (GMT) (envelope-from benlutz@datacomm.ch) Received: from localhost (unknown [127.0.0.1]) by maxlor.mine.nu (Postfix) with ESMTP id C083A2E07F; Mon, 29 May 2006 17:04:12 +0200 (CEST) X-Virus-Scanned: amavisd-new at atlantis.intranet Received: from maxlor.mine.nu ([127.0.0.1]) by localhost (atlantis.intranet [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id h5EkezN41ncp; Mon, 29 May 2006 17:04:12 +0200 (CEST) Received: from mini.intranet (mini.intranet [10.0.0.17]) by maxlor.mine.nu (Postfix) with ESMTP id 8D5CC2E07E; Mon, 29 May 2006 17:04:12 +0200 (CEST) From: Benjamin Lutz To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 17:04:06 +0200 User-Agent: KMail/1.8.3 References: <5b028b0a0605290710k3e2ef279y178883b91f947a8a@mail.gmail.com> In-Reply-To: <5b028b0a0605290710k3e2ef279y178883b91f947a8a@mail.gmail.com> X-Face: $Ov27?7*N,h60fIEfNJdb!m,@#4T/d; 1hw|W0zvsHM(a$Yn6BYQ0^SEEXvi8>D`|V*F"=?iso-8859-1?q?=5F+R=0A?= 2@Aq>+mNb4`,'[[%z9v0Fa~]AD1}xQO3|>b.z&}l#R-_(P`?@Mz"kS; XC>Eti,i3>%@g?4f,=?iso-8859-1?q?=5Cc7=7CGh=0A?= =?iso-8859-1?q?_wb=26ky=24b2PJ=5E=5C0b83NkLsFKv=7CsmL/cI4UD=25Tu8alAD?= MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2462822.ugrhAVCQNI"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605291704.09905.benlutz@datacomm.ch> Cc: Federico Freigedo Subject: Re: Hi there, I got some questions if I may X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 15:04:32 -0000 --nextPart2462822.ugrhAVCQNI Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Monday 29 May 2006 16:10, Federico Freigedo wrote: > Hi there I would like to ask you some questions if I may.. Im wanna make= a > server for a site like friendster.com and I am very interested of using > FreeBSD as my SO on my server but I got some problems first I notice that > FreeBSD does not detected the new SATA hard drives only IDE HD, also that= I > found it very complicate to administrate and to install there is a new go= od > manual to use as reference to learn how to use this fantastic SO as a > newbie so people could learn how to use it, administrate and install.?? Yes, SATA drives do work. Are you sure you're using a recent version of=20 =46reeBSD? As for documentation, start with these: Handbook: http://www.freebsd.org/handbook =46AQ: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/ The Complete FreeBSD: http://www.lemis.com/grog/Documentation/CFBSD/ Cheers Benjamin --nextPart2462822.ugrhAVCQNI Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQBEew1pgShs4qbRdeQRAkGHAKCH4PlQlCC2Z168vBc/G1yDu1FSswCfWSil wb0K4YRt2E4V7dDmFs9in9w= =4GaT -----END PGP SIGNATURE----- --nextPart2462822.ugrhAVCQNI-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 15:41:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C29916ADE2 for ; Mon, 29 May 2006 15:41:47 +0000 (UTC) (envelope-from lars+lister.freebsd@adventuras.no) Received: from mail.adventuras.no (mail.adventuras.no [194.63.250.215]) by mx1.FreeBSD.org (Postfix) with ESMTP id 56FCD43D5E for ; Mon, 29 May 2006 15:41:43 +0000 (GMT) (envelope-from lars+lister.freebsd@adventuras.no) Received: from [80.111.250.79] (hjem [80.111.250.79]) (authenticated bits=0) by mail.adventuras.no (8.12.10/8.12.10) with ESMTP id k4TFfPtr029659 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Mon, 29 May 2006 17:41:25 +0200 Message-ID: <447B1624.5020005@adventuras.no> Date: Mon, 29 May 2006 17:41:24 +0200 From: Lars Kristiansen User-Agent: Thunderbird 1.5.0.2 (X11/20060424) MIME-Version: 1.0 To: Robert Davison References: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> In-Reply-To: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit X-Adventuras-MailScanner-Information: Please contact the ISP for more information X-Adventuras: du kan filtrere etter AdvSpamScore over 5-10 X-Adventuras-SpamCheck: not spam, SpamAssassin (score=-4.062, required 6, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.34, BAYES_00 -2.60) X-MailScanner-From: lars+lister.freebsd@adventuras.no X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 15:41:51 -0000 Robert Davison wrote: > I've done a bit more digging. It seems that my sendmail_in.pid and sendmail_out.pid files are not running in /var/run, despite having this in my rc.conf.. > > sendmail_enable="NONE" > clamd_enable="YES" > freshd_enable="YES" > mailscanner_enable="YES" > mta_enable="YES" > mta_type="sendmail" > mta_profiles="incoming outgoing submitqueue" > mta_incoming_flags="-L sm-mta-in -bd -OPrivacyOptions=noetrn -OQueueDirectory=/v > ar/spool/mqueue.in -ODeliveryMode=queueonly" > mta_incoming_pidfile="/var/run/sendmail_in.pid" > mta_incoming_configfile="/etc/mail/sendmail.cf" > mta_outgoing_flags="-L sm-mta-out -q15m" > mta_outgoing_pidfile="/var/run/sendmail_out.pid" > mta_outgoing_configfile="/etc/mail/sendmail.cf" > mta_submitqueue_flags="-L ms-msp-queue -Ac -q15m" > mta_submitqueue_pidfile="/var/spool/clientmqueue/sm-client.pid" > mta_submitqueue_configfile="/etc/mail/submit.cf" > > I'm getting a sendmail.pid file, but nothing more > Does that not indicate that some "old" sendmail is still running? Can you stop those? If unsure, maybe reboot without sendmails, and then check with ps. -- Regards from Lars > > --------------------------------- > Try the all-new Yahoo! Mail . "The New Version is radically easier to use" – The Wall Street Journal > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon May 29 15:51:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3A96B16B185 for ; Mon, 29 May 2006 15:51:02 +0000 (UTC) (envelope-from katsuo_harada_evil_does@hotmail.com) Received: from hotmail.com (bay105-f28.bay105.hotmail.com [65.54.224.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id 00F3243D46 for ; Mon, 29 May 2006 15:51:00 +0000 (GMT) (envelope-from katsuo_harada_evil_does@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 29 May 2006 08:51:00 -0700 Message-ID: Received: from 65.54.224.200 by by105fd.bay105.hotmail.msn.com with HTTP; Mon, 29 May 2006 15:50:59 GMT X-Originating-IP: [139.124.21.140] X-Originating-Email: [katsuo_harada_evil_does@hotmail.com] X-Sender: katsuo_harada_evil_does@hotmail.com From: "Vitaly D" To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 17:50:59 +0200 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed X-OriginalArrivalTime: 29 May 2006 15:51:00.0641 (UTC) FILETIME=[AED71910:01C68337] Subject: pango freetype2 installation problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 15:51:10 -0000 Hello, All for a story i've installed minimal FreeBSD 4.11 on intel (i386). I'm trying to make a desktop station. i'm compiling from official sources (dont' use packages system) i've installed XFree86 4.6.0 (fontconfig freetype 2.1.8 included) !!! Important issue about freetype 2.2.1 on freebsd 4 series !!!! i've tried to make pango 1.5.0 (latest) I get compile error in pango-ot-info.c complaining about freetype.h due to #error macros included at the head of freetype.h. By the way in pango 1.5.0 package some include directives trying to search for ftobject.h in a wrong directory. ( instead of Solved by adjusting CPPFLAGS=-I/usr/X11R6/freetype2/freetype/config ... They say in freetype.h that this hierarchy won't be followed in future releases but for now it seems to bring obscure errors while building softaware relying on freetype (what the F... ft2build.h is not included yet ???) what should i do? i've tried to install freetype 2.2.1 (latest) but it complains about sysntax error in /usr/include/sys/mman.h line 140 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and even i've sucsseeded it seems that freetype2.2.1 package preserves the same include hierarchy as 2.1.8 so it won't resolve my problem (read before this paragraph). please if anyone see an issue about my problem ??? CC me because i'm not on the list and internet acces is too expensive for me. i'll try to post a bug report at pango list (include problem #include should be and also make a follow up to freetype2 team as it seems to report syntax error in /usr/include/sys/mman.h have a nice day. Best Regards Vitaly katsuo_harada_evil_does [at] hotmail [dot] com _________________________________________________________________ MSN Hotmail sur i-mode™ : envoyez et recevez des e-mails depuis votre téléphone portable ! http://www.msn.fr/hotmailimode/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 16:20:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EC28916A5B9 for ; Mon, 29 May 2006 16:20:27 +0000 (UTC) (envelope-from csar@123.com.sv) Received: from asgard1.americatelsal.com (asgard.americatelsal.com [200.13.161.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5EC3343D48 for ; Mon, 29 May 2006 16:20:26 +0000 (GMT) (envelope-from csar@123.com.sv) Received: (qmail 63437 invoked from network); 29 May 2006 16:40:17 -0000 Received: from unknown (HELO ?192.168.10.251?) (200.13.161.68) by asgard1.americatelsal.com with SMTP; 29 May 2006 16:40:17 -0000 Message-ID: <447B1F21.2050406@123.com.sv> Date: Mon, 29 May 2006 10:19:45 -0600 From: =?ISO-8859-1?Q?C=E9sar_Amaya?= User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: es-ar, es, en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Subject: WARNING - WRITE_DMA UDMA ICRC error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 16:20:33 -0000 hello list! I´m having a trouble with a hard disk, I´m getting this warning: kernel: ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=38059135 I read that it could be a IDE cable problem, that the cable does not support UDMA speed >= 66 If it wasn´t the cable where the problem is, how can I set the drive UDMA speed to UDMA66 at boot time to make it permanent? I have a FreeBSD 6.1 system and ExcelStor j880 hard disk. Could you help me, please? Thanks. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 16:31:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AF12216A67F for ; Mon, 29 May 2006 16:31:40 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.174]) by mx1.FreeBSD.org (Postfix) with ESMTP id 04E9243D46 for ; Mon, 29 May 2006 16:31:39 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so151726uge for ; Mon, 29 May 2006 09:31:38 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=UevWVBCycRzxfoDTmPlCG4ci7kgbLF/4oYtFok4pebatTYnwvgag+fZJPiP/2Wjqe+3tzRivTSb5zgdMBsIltzI0ab09LzU5ZEeoxBo5Gk6BzGDIhg7foAuuVYgD9SYQnXue5pztAuUG1RGyUW07g5BgGLEprNIXqcZD0x/nwYk= Received: by 10.78.32.16 with SMTP id f16mr427274huf; Mon, 29 May 2006 09:31:38 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Mon, 29 May 2006 09:31:38 -0700 (PDT) Message-ID: <18e02bd30605290931i6fb55892h634b55201b50d60f@mail.gmail.com> Date: Mon, 29 May 2006 16:31:38 +0000 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <20060529231524.0f76b3ba@localhost> MIME-Version: 1.0 References: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> <20060529231524.0f76b3ba@localhost> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: geli resilience to power outages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 16:31:43 -0000 On 5/29/06, Norberto Meijome wrote: > > On Mon, 29 May 2006 14:43:46 +0300 > "Iantcho Vassilev" wrote: > > > DO someone know if and how GELI is resilience to power outages? > > > > Does the box is still encrypted? After reboot what would happen to fcsk? > > Hi Iantcho , > I dont know for a fact the effect with a power outage, but I use it quite > a lot > on laptops (which a) freeze sometimes out of nowhere , and b) sometimes > dont > resume properly,). In both situations, I've usually had geli mounted > disks (1 > x 6 GB, 1 x 500 MB) running when the events happened. ( as well as a 4 GB > swap > which is also GELI backed) > > They (touch wood) haven't suffered data loss. /usr and /var seem be more > affected by this ungraceful shutdowns than the .eli devices. > > I suppose it's all cool thanks to soft-updates, and the fact that GELI > encrypts > on a per block basis (yeah, no more pgp-busted disks like in Windows :) ). > > good luck, > Beto Thanks for the input,Beto.. As i didn`t read the GELI "workbook" can you tell be can i convert existing partition in GELI or i should repartition? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 16:38:12 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C396A16A9B1 for ; Mon, 29 May 2006 16:38:12 +0000 (UTC) (envelope-from aaronvan@comcast.net) Received: from rwcrmhc12.comcast.net (rwcrmhc12.comcast.net [204.127.192.82]) by mx1.FreeBSD.org (Postfix) with ESMTP id 73BF543D46 for ; Mon, 29 May 2006 16:38:09 +0000 (GMT) (envelope-from aaronvan@comcast.net) Received: from [192.168.1.100] (c-67-180-170-102.hsd1.ca.comcast.net[67.180.170.102]) by comcast.net (rwcrmhc12) with SMTP id <20060529163808m1200ito5ue>; Mon, 29 May 2006 16:38:08 +0000 User-Agent: Microsoft-Entourage/11.2.3.060209 Date: Mon, 29 May 2006 09:34:12 -0700 From: Aaron VanAlstine To: Kevin Kinsey Message-ID: Thread-Topic: Why won't FreeBSD boot from hard drive?? Thread-Index: AcaDPbdp9ehS9u8wEdqgCwAFAmHJOg== In-Reply-To: <447A00AC.7020109@daleco.biz> Mime-version: 1.0 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: quoted-printable Cc: "freebsd-questions@freebsd.org" Subject: Re: Why won't FreeBSD boot from hard drive?? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 16:38:13 -0000 The SATA controller chip is the Intel ICH7R Southbridge RAID Controller. Th= e hard is selected as the boot device; however, it seems to default back to the DVD/CD upon reboot. Even when I disconnect the DVD/CD it doesn't look t= o the hard drives. I wonder if there is a problem booting the OS from the RAID array? The motherboard manual states "If you want to boot the system from a HD include= d in a created RAID array, copy first the RAID driver from the support CD to = a floppy disk before you install an OS to the selected HD." However, I don't have a floppy drive and I suspect they assume I'm loading Windows. Do you think it makes a difference if I install FreeBSD and then configure the RAID array, or visa-versa? -- Aaron On 5/28/06 12:57, "Kevin Kinsey" wrote: > Aaron VanAlstine wrote: >> I successfully loaded FreeBSD 6.0 from CD all the way until the system >> reboots; however, the computer seems regard the DVD/CD as the boot hard >> drive and is trying to boot from that. During boot-up it auto detects th= e >> DVD ROM as the Pri Master, and the two HDs as 3rd and 4th Master. When i= t >> gets to the boot-stage, I get a message =B3Reboot and Select proper Boot >> device or Insert Boot Media in selected Boot device and press a key.=B2 >> According to the BIOS setup utility, the 1st boot device is Intel Stripe= d >> RAID. Yet, when I restart and hit F8 to select the BBS popup menu, it >> appears that the DVD is still the boot device. I change it to the HD and >> re-boot and still I get the original =B3Reboot and Select proper Boot devi= ce >> or Insert Boot Media in selected Boot device and press a key" message. >>=20 >> The DVD/CD cable is connected to the blue primary IDE on the motherboard= and >> the two HD are connected to SATA1 and SATA2. From the Main screen of the >> BIOS setup utility: >>=20 >> -- Primary IDE Master is the NEC DVD RW. >> -- Primary IDE Slave Not Detected, >> -- IDE Configuration is RAID (OnBoard Serial-ATA BOOTROM is Disabled.) >>=20 >> Any ideas on how I can make the system boot from the hard drive instead = of >> trying the DVD/CD? >>=20 >=20 >=20 > I assume that you've noted the existence of a "Boot from RAID" or > similar option, and told the BIOS **not** to boot from CD/DVD? >=20 >=20 >> My hardware consists of: >>=20 >> ASUS P5LD2 ACPI Bios Revision 0901 motherboard >=20 >=20 > Which SATA controller chip on this board? >=20 > The reason I ask --- and this was on a Windows server, but would > apply either way: >=20 > I had a server doing something very similar --- install from CD, > then can't find its array with both hands. >=20 > Someone I read on the 'net* has a theory --- possibly confirmed, > that the next generation SATA drives take so long to spin up in > some cases that the motherboard's BIOS times out waiting on them. > He claims this to be the case with Seagate and Maxtor SATA-II > drives (especially those with "Native Command Queueing" or similar > technology). >=20 > The board in question was an Epox board with the NVidia NForce 4 > SATA RAID controller. Since this board also had a Silicon Image > RAID contoller, we tried that and had some success. >=20 > Since we still wanted to use the "primary" SATA controller, we > contacted our HDD manufacturer and received firmware updates > for the drives. After this, they've been quite reliably booting > for a few days now. >=20 > Kevin Kinsey >=20 > * Try googling first. IIRC, forum posts on several forums, > nick might have been "RobertP" or some such... From owner-freebsd-questions@FreeBSD.ORG Mon May 29 16:44:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E45616A467 for ; Mon, 29 May 2006 16:44:14 +0000 (UTC) (envelope-from samsperanini@bellnet.ca) Received: from tomts23-srv.bellnexxia.net (tomts23.bellnexxia.net [209.226.175.185]) by mx1.FreeBSD.org (Postfix) with ESMTP id 77FFF43D48 for ; Mon, 29 May 2006 16:44:12 +0000 (GMT) (envelope-from samsperanini@bellnet.ca) Received: from speranind94408 ([70.52.203.145]) by tomts23-srv.bellnexxia.net (InterMail vM.5.01.06.13 201-253-122-130-113-20050324) with ESMTP id <20060529164411.FMXO9224.tomts23-srv.bellnexxia.net@speranind94408>; Mon, 29 May 2006 12:44:11 -0400 From: "Sam Speranini" To: "Bill Moran" Date: Mon, 29 May 2006 12:50:52 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: <20060526170413.58979fdb.wmoran@collaborativefusion.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Cc: greenwood.andy@gmail.com, freebsd-questions@freebsd.org Subject: RE: Problems booting operating system and with root password X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 16:44:14 -0000 Hi there, I have booted up in single user mode because the option is available at startup but it prompts me with: Enter full pathname of shell or return for /bin/sh Doesn't matter what I put in or leave it doesn't give me anything to make changes to root password. There are really no commands that I can use after this point. Any suggestions on moving forward to changing or removing the root password. It may sound like a stupid question but and steps would really help. Thank you for all responses. Sam -----Original Message----- From: Bill Moran [mailto:wmoran@collaborativefusion.com] Sent: Friday, May 26, 2006 5:04 PM To: Sam Speranini Cc: greenwood.andy@gmail.com; polina_mnouskina@yahoo.com; freebsd-questions@freebsd.org Subject: Re: Problems booting operating system and with root password "Sam Speranini" wrote: > Thank you for the quick response and I will try booting up in single mode > for the root password issue. > One of our main boxes at boot up comes up with the error message below and > goes no further. It seems like the kernel is missing or got corrupted. The > box ran fine till yesterday morning when we noticed it was at this stage. Is > there anything that can be done to recover. If this machine worked before, then _something_ has occurred to corrupt data on disk. Some possible reasons are breakin, operator error, or hardware failure. If you're not _sure_ this was caused by operator error, then you should be afraid: either your box was compromised or your hard drives are failing. In either of those scenerios, you need to rebuild the box, possibly after replacing hardware. Hopefully you have backups, if not, you may be forking out good money for a data recovery company to extract your data off a damaged hard drive. If it's a breakin, you might be able to boot the system off a live CD (such as FreeSBIE) and get your data off the drive before rebuilding. If it's a hardware failure, you can try the liveCD thing, but it's less likely to work. Good luck. > Press for BMC Setup within 5 sec..... > No /boot/loader > > FreeBSD /i386 boot > Default: 0:da(0,a)/kernel > boot: > No /Kernel > > FreeBSD /i386 boot > Default: 0:da(0,a)/kernel > boot: -- Bill Moran Two by two, hands of blue. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 16:45:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0348516A467; Mon, 29 May 2006 16:45:08 +0000 (UTC) (envelope-from root@pukruppa.de) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.186]) by mx1.FreeBSD.org (Postfix) with ESMTP id DDAAF43D5D; Mon, 29 May 2006 16:45:03 +0000 (GMT) (envelope-from root@pukruppa.de) Received: from [213.146.114.24] (helo=reverse-213-146-114-24.cust.kamp-dsl.de) by mrelayeu.kundenserver.de (node=mrelayeu10) with ESMTP (Nemesis), id 0ML31I-1FkkrW2XTC-0006FH; Mon, 29 May 2006 18:45:03 +0200 Date: Mon, 29 May 2006 20:34:30 +0200 (CEST) From: "P.U.Kruppa" X-X-Sender: root@www.pukruppa.net To: freebsd-questions@freebsd.org In-Reply-To: <20060527182114.87FE.GERARD@seibercom.net> Message-ID: <20060529203312.M25629@www.pukruppa.net> References: <20060527182114.87FE.GERARD@seibercom.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Provags-ID: kundenserver.de abuse@kundenserver.de login:2446dbdf8275641f979193ced594c629 Cc: andreas@freebsd.org Subject: Re: Installing Apsfilter X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 16:45:09 -0000 On Sat, 27 May 2006, Gerard Seibert wrote: > Trying to install Apsfilter, I encountered a problem. It seems that it > requires print/acroread7 which is an interactive port. Reading the > Makefile on acroread7, it seems I have to go to > http://www.adobe.com/products/acrobat/distribute.html and fill out a > form, wait a few days to see if I am approved, and then what? Do you really want to redistribute acroread? # make install just works as usual around here. Uli. > > Is this really necessary? Is there some way around this? If I follow > through with this scenario, what happens? Do I get a special code or > file to install that will allow me to install the port just so I can get > apsfilter installed? > > Thanks! > -- > Gerard Seibert > gerard@seibercom.net > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > ********************************************* * Peter Ulrich Kruppa - Wuppertal - Germany * ********************************************* From owner-freebsd-questions@FreeBSD.ORG Mon May 29 17:01:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 32A4E16AEBD for ; Mon, 29 May 2006 17:01:14 +0000 (UTC) (envelope-from gigi_8439@yahoo.fr) Received: from smtp008.mail.ukl.yahoo.com (smtp008.mail.ukl.yahoo.com [217.12.11.62]) by mx1.FreeBSD.org (Postfix) with SMTP id E66F143D4C for ; Mon, 29 May 2006 17:01:12 +0000 (GMT) (envelope-from gigi_8439@yahoo.fr) Received: (qmail 45411 invoked from network); 29 May 2006 17:01:11 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.fr; h=Received:In-Reply-To:References:Mime-Version:Content-Type:Message-Id:Cc:Content-Transfer-Encoding:From:Subject:Date:To:X-Mailer; b=GZ6NcO+Sp4YMvUfiB7j6eHCAlXT/PMaNtlc8smd9UFmkGseOniU0IXVL7X394fVhH1Kji0j/Ft2QUM1hk8ATByjxAyz85MqCbnRT9Vd8nus6g5/D2o1hubLg/AueLCtw9xCsalqMCaYpdeaSLr/bhfMIpGytaFXMI9lu6t7tb+0= ; Received: from unknown (HELO ?192.168.10.1?) (gigi?8439@82.127.29.150 with plain) by smtp008.mail.ukl.yahoo.com with SMTP; 29 May 2006 17:01:11 -0000 In-Reply-To: <447B1F21.2050406@123.com.sv> References: <447B1F21.2050406@123.com.sv> Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=ISO-8859-1; delsp=yes; format=flowed Message-Id: <321B418E-953A-4593-94F8-FBD6B0B6A59A@yahoo.fr> Content-Transfer-Encoding: quoted-printable From: =?ISO-8859-1?Q?Ghislain_Gar=E7on?= Date: Mon, 29 May 2006 19:01:14 +0200 To: =?ISO-8859-1?Q?C=E9sar_Amaya?= X-Mailer: Apple Mail (2.750) Cc: freebsd-questions@freebsd.org Subject: Re: WARNING - WRITE_DMA UDMA ICRC error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 17:01:14 -0000 > hello list! > > I=B4m having a trouble with a hard disk, I=B4m getting this warning: > > kernel: ad2: WARNING - WRITE_DMA UDMA ICRC error (retrying =20 > request) LBA=3D38059135 > > I read that it could be a IDE cable problem, that the cable does =20 > not support UDMA speed >=3D 66 > > If it wasn=B4t the cable where the problem is, how can I set the =20 > drive UDMA speed to UDMA66 at boot time to make it permanent? > > I have a FreeBSD 6.1 system and ExcelStor j880 hard disk. > Cool i'm not alone!!! > Could you help me, please? I had this problem during installation from a CDROM. The FAQ says the =20= kernel should switch to another mode ( PIO ) in order to configure =20 the hard drive ( as NetBSD does for example ... ). Unfortunatly it =20 doesn't... Someone for confirmation? ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set From owner-freebsd-questions@FreeBSD.ORG Mon May 29 17:02:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 40B8916AC17 for ; Mon, 29 May 2006 17:02:36 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id A2D3843D48 for ; Mon, 29 May 2006 17:02:35 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wx-out-0102.google.com with SMTP id i31so161239wxd for ; Mon, 29 May 2006 10:02:35 -0700 (PDT) Received: by 10.70.109.7 with SMTP id h7mr2552814wxc; Mon, 29 May 2006 10:02:35 -0700 (PDT) Received: from ?192.168.0.4? ( [216.45.217.148]) by mx.gmail.com with ESMTP id i17sm3110648wxd.2006.05.29.10.02.34; Mon, 29 May 2006 10:02:34 -0700 (PDT) Date: Mon, 29 May 2006 13:02:36 -0400 From: Gerard Seibert To: freebsd-questions@freebsd.org Organization: Seibercom In-Reply-To: <20060529203312.M25629@www.pukruppa.net> References: <20060527182114.87FE.GERARD@seibercom.net> <20060529203312.M25629@www.pukruppa.net> X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxcR nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q Message-Id: <20060529125828.EA46.GERARD@seibercom.net> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Mailer: Becky! ver. 2.25 [en] Subject: Re: Installing Apsfilter X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 17:02:39 -0000 P.U.Kruppa wrote: > On Sat, 27 May 2006, Gerard Seibert wrote: > > > Trying to install Apsfilter, I encountered a problem. It seems that it > > requires print/acroread7 which is an interactive port. Reading the > > Makefile on acroread7, it seems I have to go to > > http://www.adobe.com/products/acrobat/distribute.html and fill out a > > form, wait a few days to see if I am approved, and then what? > Do you really want to redistribute acroread? > # make install > just works as usual around here. > > Uli. > > > > > Is this really necessary? Is there some way around this? If I follow > > through with this scenario, what happens? Do I get a special code or > > file to install that will allow me to install the port just so I can get > > apsfilter installed? > > > > Thanks! I found the problem. I had 'BATCH= yes' sans quotes set in the /etc/make.conf file. However, I do not believe that the program should just fail if that flag is set. Rather, it should print some sort of warning regarding the use of 'BATCH' either in the make.conf file or on the command line. -- Gerard Seibert gerard@seibercom.net "The very powerful and the very stupid have one thing in common. Instead of altering their views to fit the facts, they alter the facts to fit their views ... which can be very uncomfortable if you happen to be one of the facts that needs altering." Doctor Who From owner-freebsd-questions@FreeBSD.ORG Mon May 29 17:08:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 91AE116AE35 for ; Mon, 29 May 2006 17:08:02 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2651343D46 for ; Mon, 29 May 2006 17:08:01 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so103002pye for ; Mon, 29 May 2006 10:08:01 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Za3CW1Qy1ZmSNao9poJ7pd9LLQHLyVbRTlIYEUeh7DnzrSgRhrPgreoAjwgqqgvk+p+tVdNzxFc2iNDsuzj2BDs3TxYlWIoxuTlgHH6V3N9Ry3hxsAX02PxZis98GxiOCvt9G070Hi6p5hCOo4FeZBADmXaV25RYhmkaYrMqtag= Received: by 10.35.87.8 with SMTP id p8mr1028270pyl; Mon, 29 May 2006 10:08:01 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Mon, 29 May 2006 10:08:01 -0700 (PDT) Message-ID: Date: Mon, 29 May 2006 19:08:01 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: <200605290912.49807.mark@msen.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 17:08:02 -0000 Hi Stefi, I am having trouble getting my wlan card working. My problem is that after I load the kernel modules, I see no adapter with ifconfig. Could you please tell me whether after moving the ko file to /boot/kenel you did something else like kldxref or not. I tried to update the references but it gives me an error "kldxref: can't read hash table". Have you encountered anything of this type? Atanas From owner-freebsd-questions@FreeBSD.ORG Mon May 29 18:20:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DE37816A4D3 for ; Mon, 29 May 2006 18:20:03 +0000 (UTC) (envelope-from bsd@bathnetworks.com) Received: from lmail.bathnetworks.co.uk (mail.bathnetworks.com [84.92.24.252]) by mx1.FreeBSD.org (Postfix) with ESMTP id D4BB143D5C for ; Mon, 29 May 2006 18:20:01 +0000 (GMT) (envelope-from bsd@bathnetworks.com) Received: (qmail 8974 invoked by uid 510); 29 May 2006 19:26:14 +0100 Received: from 192.168.0.104 by lmail.bathnetworks.co.uk (envelope-from , uid 508) with qmail-scanner-1.24-st-qms (clamdscan: 0.88/1261. spamassassin: 3.0.2. perlscan: 1.24-st-qms. Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 3.107329 secs); 29 May 2006 18:26:14 -0000 X-Spam-Status: No, hits=-4.5 required=5.0 X-Antivirus-MYDOMAIN-Mail-From: bsd@bathnetworks.com via lmail.bathnetworks.co.uk X-Antivirus-MYDOMAIN: 1.24-st-qms (Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 3.107329 secs Process 8967) Received: from unknown (HELO ubuntu.bathnetworks.local.bathnetworks.local) (bsd@bathnetworks.com@192.168.0.104) by lmail.bathnetworks.co.uk with SMTP; 29 May 2006 19:26:10 +0100 From: robert To: Sam Speranini In-Reply-To: References: Content-Type: text/plain Date: Mon, 29 May 2006 19:19:53 +0100 Message-Id: <1148926793.9353.1.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.4.1 Content-Transfer-Encoding: 7bit Cc: greenwood.andy@gmail.com, freebsd-questions@freebsd.org, Bill Moran Subject: RE: Problems booting operating system and with root password X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 18:20:08 -0000 On Mon, 2006-05-29 at 12:50 -0400, Sam Speranini wrote: > Hi there, > > I have booted up in single user mode because the option is available at > startup but it prompts me with: Enter full pathname of shell or return for > /bin/sh > > Doesn't matter what I put in or leave it doesn't give me anything to make > changes to root password. There are really no commands that I can use after > this point. Any suggestions on moving forward to changing or removing the > root password. It may sound like a stupid question but and steps would > really help. > > Thank you for all responses. > > Sam snip Sam, A very quick google search gave the answer with loads of hits. Try the first one: http://lantech.geekvenue.net/chucktips/jason/chuck/1002317496/addPostingForm Rob From owner-freebsd-questions@FreeBSD.ORG Mon May 29 18:32:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 04C8116A513 for ; Mon, 29 May 2006 18:32:32 +0000 (UTC) (envelope-from jason+lists.freebsd-questions@lixfeld.ca) Received: from eshara.ebit.ca (eshara.ebit.ca [69.90.17.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id B127243D53 for ; Mon, 29 May 2006 18:32:31 +0000 (GMT) (envelope-from jason+lists.freebsd-questions@lixfeld.ca) Received: from [216.7.194.254] (helo=[192.168.100.191]) by eshara.ebit.ca with esmtpsa (TLSv1:RC4-SHA:128) (Exim 4.54 (FreeBSD)) id 1FkmXW-000Mm6-Pv for freebsd-questions@freebsd.org; Mon, 29 May 2006 14:32:30 -0400 Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: FreeBSD Questions Mailing List From: Jason Lixfeld Date: Mon, 29 May 2006 14:32:27 -0400 X-Mailer: Apple Mail (2.750) Subject: Problems sshing in remotely using pam_ldap X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 18:32:32 -0000 I have a system running 6.1-RELEASE, OpenLDAP 2.3.23, Pam-LDAP 1.80 and NSS-LDAP 1.249. I have a user, called testuser configured in LDAP. I can ssh testuser@localhost and it works no problem. If I try to ssh into the box from another host, it fails. What I see in the ssh debug during the failure is: login_get_lastlog: Cannot find account for uid 2000 This error confuses me because uid 2000 exists: # id 2000 uid=2000(testuser) gid=2000(testuser) groups=2000(testuser) # id testuser uid=2000(testuser) gid=2000(testuser) groups=2000(testuser) So I really have no idea what it could be. I read something back from 2003 saying that something similar happened but it was due to incompatible ssh versions, but both localhost and the remote host are using v2, so that doesn't seem to be the issue. Any ideas? From owner-freebsd-questions@FreeBSD.ORG Mon May 29 18:38:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 687CB16A506 for ; Mon, 29 May 2006 18:38:03 +0000 (UTC) (envelope-from dan@dan.emsphone.com) Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id B645543D53 for ; Mon, 29 May 2006 18:38:02 +0000 (GMT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.13.1/8.13.4) id k4TIc1eT012657; Mon, 29 May 2006 13:38:01 -0500 (CDT) (envelope-from dan) Date: Mon, 29 May 2006 13:38:01 -0500 From: Dan Nelson To: Stephen Hurd Message-ID: <20060529183801.GB6982@dan.emsphone.com> References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> <447A8B42.2060901@sasktel.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <447A8B42.2060901@sasktel.net> X-OS: FreeBSD 5.5-PRERELEASE X-message-flag: Outlook Error User-Agent: Mutt/1.5.11 Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 18:38:03 -0000 In the last episode (May 28), Stephen Hurd said: > Stephen Hurd wrote: > >So, I suppose my questions are these: > >1) How do people cope with custom termcap entries? > >2) Is there a *correct* way to cope with custom termcap entries? > >3) Is there a good reason to not have /usr/share/misc/termcap be a > >symlink to /etc/termcap rather than the reverse which would allow > >mergemaster to Just Work? that is... putting it in /etc fixes a > >problem... does moving it create one or more more serious problems? > >4) Am I supposed to submit every custom termcap tweak for inclusion in > >the next release so I can keep using my terminals? > Anyone? What's wrong with just putting your custom termcap entry in /usr/src/share/termcap/termcap.src so it gets installed during installworld? -- Dan Nelson dnelson@allantgroup.com From owner-freebsd-questions@FreeBSD.ORG Mon May 29 19:13:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F243F16A79B for ; Mon, 29 May 2006 19:13:40 +0000 (UTC) (envelope-from shurd@sasktel.net) Received: from misav02.sasknet.sk.ca (misav10.sasknet.sk.ca [142.165.20.174]) by mx1.FreeBSD.org (Postfix) with ESMTP id 56ADB43D70 for ; Mon, 29 May 2006 19:13:37 +0000 (GMT) (envelope-from shurd@sasktel.net) Received: from bgmpomr2.sasknet.sk.ca ([142.165.72.23]) by misav10 with InterScan Messaging Security Suite; Mon, 29 May 2006 13:13:36 -0600 Received: from backoffice ([206.163.250.91]) by bgmpomr2.sasknet.sk.ca (SaskTel eMessaging Service) with ESMTPA id <0J0100EQ4K2OD8C0@bgmpomr2.sasknet.sk.ca> for freebsd-questions@freebsd.org; Mon, 29 May 2006 13:13:36 -0600 (CST) Date: Mon, 29 May 2006 13:13:31 -0600 From: Stephen Hurd To: Dan Nelson Message-id: <000c01c68353$f95f89b0$5200a8c0@backoffice> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Mailer: Microsoft Outlook Express 6.00.2900.2869 Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original Content-transfer-encoding: 7BIT X-Priority: 3 X-MSMail-priority: Normal References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> <447A8B42.2060901@sasktel.net> <20060529183801.GB6982@dan.emsphone.com> Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 19:13:48 -0000 > In the last episode (May 28), Stephen Hurd said: >> Stephen Hurd wrote: >> >So, I suppose my questions are these: >> >1) How do people cope with custom termcap entries? >> >2) Is there a *correct* way to cope with custom termcap entries? >> >3) Is there a good reason to not have /usr/share/misc/termcap be a >> >symlink to /etc/termcap rather than the reverse which would allow >> >mergemaster to Just Work? that is... putting it in /etc fixes a >> >problem... does moving it create one or more more serious problems? >> >4) Am I supposed to submit every custom termcap tweak for inclusion in >> >the next release so I can keep using my terminals? >> Anyone? > > What's wrong with just putting your custom termcap entry in > /usr/src/share/termcap/termcap.src so it gets installed during > installworld? The only issue with doing that is that then I have to manually merge changes or stop using CVSup to update the sources as well as figure out how to exclude a specific file from exact mode in CVSup... or possibly I would need to switch to AnonCVS and pay closer attention to what gets updated. This does present the possibility of a permanent solution (which is good) but seems like a fiendishly large amount of work for what seems to me like a simple task especially considering that this configuration file has been around since the late 70s. Thanks for your input... and hope for a permanent workaround. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 19:57:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2EBF316A529 for ; Mon, 29 May 2006 19:57:11 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0AAA843D58 for ; Mon, 29 May 2006 19:57:09 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so133831pye for ; Mon, 29 May 2006 12:57:08 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=PdOA3oypqH4sOM89lhKrQO9wase7syHCoiMOvJS7gIujO0ItWMYXDW6GOd0qazMUy/Ez3Up/GEMHMIMojcHWCJbWD5vbUO0FxA1fZ5W2cj2oa+eJ54/BYkF0CspVGD8reO8jwOo6cp6OKsJmWBU8YQ+OcpDdxDHoTUw2MimnLWU= Received: by 10.35.88.17 with SMTP id q17mr3596565pyl; Mon, 29 May 2006 12:57:08 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Mon, 29 May 2006 12:57:08 -0700 (PDT) Message-ID: Date: Mon, 29 May 2006 21:57:08 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Subject: Re: Problem with BCM4306 driver X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 19:57:12 -0000 I realised netgen is the way of doing things, yet I do not see the device. I read that in a static build of the kernel with ndis one should include device ndis and device ndisapi. In my current GENERIC build these are not included. Should I recompile or it is not necessary? I also noticed that one should use kldxref however when I try to recompile the references it gives me "kldxref: can't read hash table". Is this normal? How can I fix it and eventually can the problem be due to bad references? I am really getting confused. Atanas From owner-freebsd-questions@FreeBSD.ORG Mon May 29 19:57:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5549116A55B for ; Mon, 29 May 2006 19:57:16 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.169]) by mx1.FreeBSD.org (Postfix) with ESMTP id AEAF343D58 for ; Mon, 29 May 2006 19:57:15 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so236984uge for ; Mon, 29 May 2006 12:57:14 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=LBBIDoSUi0YVEilINpqm02wA/yRhzmBEMKkOFYGow3jo8ZIS/48H+Ltx4BIUNrsZ/5p+bKl1NPRnFshqT/n5Sxa5hIwqlTXQA0xYY40UoL7heK5/xpgDrxEaYb157rTfONSEQYZXATGvwJCqiq+/+KQyQP5DQRZxSXJn13uN1+U= Received: by 10.78.47.15 with SMTP id u15mr460884huu; Mon, 29 May 2006 11:57:25 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Mon, 29 May 2006 11:57:25 -0700 (PDT) Message-ID: <18e02bd30605291157nc5ed17di32804a6609d53606@mail.gmail.com> Date: Mon, 29 May 2006 21:57:25 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: How to make S-video working(FujitsuSiemense AmiloPro) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 19:57:18 -0000 Does someone has tried to output through S-Video? Greatly appreciate From owner-freebsd-questions@FreeBSD.ORG Mon May 29 20:51:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D314616ACF6 for ; Mon, 29 May 2006 20:51:33 +0000 (UTC) (envelope-from aren.tyr@gawab.com) Received: from info9.gawab.com (info9.gawab.com [204.97.230.38]) by mx1.FreeBSD.org (Postfix) with SMTP id 57A2E43D48 for ; Mon, 29 May 2006 20:51:33 +0000 (GMT) (envelope-from aren.tyr@gawab.com) Received: (qmail 16030 invoked by uid 1004); 29 May 2006 20:52:51 -0000 Received: from unknown (HELO yggdrasil) (aren.tyr@gawab.com@62.56.121.23) by gawab.com with SMTP; 29 May 2006 20:52:51 -0000 X-Trusted: Whitelisted From: Aren Olvalde Tyr To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 21:49:30 +0100 User-Agent: KMail/1.9.1 References: <20060528192121.GE50477@leia.lambermont.dyndns.org> <4479FF59.7030902@gmail.com> <20060528205107.GF50477@leia.lambermont.dyndns.org> In-Reply-To: <20060528205107.GF50477@leia.lambermont.dyndns.org> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2288727.G9ZagUVQbv"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605292149.52299.aren.tyr@gawab.com> Subject: Re: What is the maximum file size on a dvd+r ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 20:51:41 -0000 --nextPart2288727.G9ZagUVQbv Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi The ISOCD9660 standard limits the maximum size of any individual file to 2G= B.=20 You can split the file into smaller chunks (which you can reassemble) if yo= u=20 wish to write an ISO compatible disc.=20 However, if you wish to eliminate the restriction entirely, you must write = the=20 DVD as an UDF filesystem (ISO/UDF bridge). FreeBSD can quite happily mount= =20 UDF discs (though some older DVD-ROM drives might struggle to read them=20 correctly).=20 As regards userspace tools, there is plenty of high quality burning softwar= e=20 for FreeBSD that allows you to create UDF discs (i.e. K3b). A "mkudffs" tool could be handy though. Aren. --nextPart2288727.G9ZagUVQbv Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEe15woWGxb6IQ4B4RAr4wAKDBwWV1T50e8GsfutjzL2465A3slwCggbR7 Mgk//4yu/ptoyBxW2wc0CxU= =Gohv -----END PGP SIGNATURE----- --nextPart2288727.G9ZagUVQbv-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 20:52:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E52916A994 for ; Mon, 29 May 2006 20:52:44 +0000 (UTC) (envelope-from dan@dan.emsphone.com) Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id 679F543D6A for ; Mon, 29 May 2006 20:52:41 +0000 (GMT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.13.1/8.13.4) id k4TKqeRl002735; Mon, 29 May 2006 15:52:40 -0500 (CDT) (envelope-from dan) Date: Mon, 29 May 2006 15:52:40 -0500 From: Dan Nelson To: Stephen Hurd Message-ID: <20060529205240.GC6982@dan.emsphone.com> References: <004101c6810c$edeeaaf0$5200a8c0@backoffice> <447A8B42.2060901@sasktel.net> <20060529183801.GB6982@dan.emsphone.com> <000c01c68353$f95f89b0$5200a8c0@backoffice> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000c01c68353$f95f89b0$5200a8c0@backoffice> X-OS: FreeBSD 5.5-PRERELEASE X-message-flag: Outlook Error User-Agent: Mutt/1.5.11 Cc: freebsd-questions@freebsd.org Subject: Re: Custom termcap entries and installworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 20:52:49 -0000 In the last episode (May 29), Stephen Hurd said: > >In the last episode (May 28), Stephen Hurd said: > >>Stephen Hurd wrote: > >>>So, I suppose my questions are these: > >>>1) How do people cope with custom termcap entries? > >>>2) Is there a *correct* way to cope with custom termcap entries? > >>>3) Is there a good reason to not have /usr/share/misc/termcap be a > >>>symlink to /etc/termcap rather than the reverse which would allow > >>>mergemaster to Just Work? that is... putting it in /etc fixes a > >>>problem... does moving it create one or more more serious problems? > >>>4) Am I supposed to submit every custom termcap tweak for inclusion in > >>>the next release so I can keep using my terminals? > >>Anyone? > > > >What's wrong with just putting your custom termcap entry in > >/usr/src/share/termcap/termcap.src so it gets installed during > >installworld? > > The only issue with doing that is that then I have to manually merge > changes or stop using CVSup to update the sources as well as figure > out how to exclude a specific file from exact mode in CVSup... or > possibly I would need to switch to AnonCVS and pay closer attention > to what gets updated. > > This does present the possibility of a permanent solution (which is > good) but seems like a fiendishly large amount of work for what seems > to me like a simple task especially considering that this > configuration file has been around since the late 70s. I cvsup the raw CVS repository, then check out a source tree with cvs which I build against. That lets me modify the source however I want, and the changes persist across "cvs update" runs. -- Dan Nelson dnelson@allantgroup.com From owner-freebsd-questions@FreeBSD.ORG Mon May 29 21:15:21 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0658D16AC2C for ; Mon, 29 May 2006 21:15:21 +0000 (UTC) (envelope-from dead_line@hotmail.com) Received: from hotmail.com (bay20-f19.bay20.hotmail.com [64.4.54.108]) by mx1.FreeBSD.org (Postfix) with ESMTP id C9A4E43D55 for ; Mon, 29 May 2006 21:15:20 +0000 (GMT) (envelope-from dead_line@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 29 May 2006 14:15:20 -0700 Message-ID: Received: from 62.150.131.187 by by20fd.bay20.hotmail.msn.com with HTTP; Mon, 29 May 2006 21:15:17 GMT X-Originating-IP: [62.150.131.187] X-Originating-Email: [dead_line@hotmail.com] X-Sender: dead_line@hotmail.com From: "Marwan Sultan" To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 21:15:17 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed X-OriginalArrivalTime: 29 May 2006 21:15:20.0486 (UTC) FILETIME=[FDCFCC60:01C68364] Subject: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 21:15:24 -0000 Hello Everyone, I have a server Up and running, 4.8-R, (well why 4.8? its up since years) However, this server is for commercial use, recently, we started Home pages hosting, which requier me to give the user access to the shell, Well, the question, Lets say, I have 2 groups, Group1, Group2 under Groupe1 is the webpages shell accounts (user accounts) and group2, just shell users, If user1 from Group1 will ftp or ssh to the box, his default home path will be /home/group1/user1 But, he still can navigate thro his FTP or ssh to see the directories and read files of group1 or group2, and play around lilbit, PLEASE how to restrict this user from going outside his shell account and restrict him from viewing others folders and webpages ? If i will chmod to something limited, then even when he browse the web to his webpage it wont work, So how to have the restriction in the same time viewing his web thro any browser worldwide? Sorry for the long email. Thank you, Marwan _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 21:16:12 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 99CBF16A6CC for ; Mon, 29 May 2006 21:16:12 +0000 (UTC) (envelope-from aren.tyr@gawab.com) Received: from info3.gawab.com (info3.gawab.com [204.97.230.45]) by mx1.FreeBSD.org (Postfix) with SMTP id 17EF943D58 for ; Mon, 29 May 2006 21:16:12 +0000 (GMT) (envelope-from aren.tyr@gawab.com) Received: (qmail 23905 invoked by uid 1004); 29 May 2006 21:16:25 -0000 Received: from unknown (HELO yggdrasil) (aren.tyr@gawab.com@62.56.121.23) by gawab.com with SMTP; 29 May 2006 21:16:25 -0000 X-Trusted: Whitelisted From: Aren Olvalde Tyr To: freebsd-questions@freebsd.org Date: Mon, 29 May 2006 22:13:22 +0100 User-Agent: KMail/1.9.1 References: <20060522230755.3ec1b02e@devil.troback.com> <200605281626.06877.aren.tyr@gawab.com> <20060528224237.3c38da44@devil.troback.com> In-Reply-To: <20060528224237.3c38da44@devil.troback.com> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1993094.6C02bFMQhL"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605292213.30611.aren.tyr@gawab.com> Subject: Re: Missing devs... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 21:16:22 -0000 --nextPart1993094.6C02bFMQhL Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi On Sunday 28 May 2006 21:42, Anders Troback wrote: > In my usbd.conf I have: > > device "Sony Ericsson W810i" > devname "umass[0-9]+" > vendor 0x0fce > product 0xe042 > attach "sleep 5 ; /sbin/mount -t msdos /dev/da1 /mnt ; /etc/rc.d/devfs > restart" > > As I said, this works for me but it seams to be a bit stupid that this > kind of workaround is needed... Yes, indeed. I was thinking about doing a similar workaround, but surely th= ere=20 must be a better way of doing this. We need a way for mount to automaticall= y=20 probe the device for filesystems first before attempting to mount the slice. Anyone got any suggestions? Just out of interest, during bootup, what command is executed to probe the= =20 devices? If I put a memory card in my reader before booting the system up,= =20 the filesystem slices on the card are detected, the device node[s] are=20 created and I can mount it straight away.=20 This is the command I want, rather than having to run a mount command that = we=20 know will fail just to create the nodes. Aren. --nextPart1993094.6C02bFMQhL Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEe2P6oWGxb6IQ4B4RAnnsAJ92FHmCT6Nn8nzEBMbrSg8TI+pI7wCgmEzK NzQgT2Mqcx+tCxj50Q/n1D8= =1wly -----END PGP SIGNATURE----- --nextPart1993094.6C02bFMQhL-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 21:31:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8CFFA16A4D4 for ; Mon, 29 May 2006 21:31:30 +0000 (UTC) (envelope-from wbs@infowest.com) Received: from tozar.infowest.com (tozar.out.smtp.infowest.com [204.17.177.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 46A8043E02 for ; Mon, 29 May 2006 21:29:49 +0000 (GMT) (envelope-from wbs@infowest.com) Received: from marbella.infowest.com (marbella.client.smtp.infowest.com [204.17.177.60]) by tozar.infowest.com (Postfix) with ESMTP id 252AD247888 for ; Mon, 29 May 2006 15:29:47 -0600 (MDT) Received: from [127.0.0.1] (71-213-95-210.slkc.qwest.net [71.213.95.210]) by marbella.infowest.com (Postfix) with ESMTP id B7549A1069 for ; Mon, 29 May 2006 15:29:41 -0600 (MDT) Message-ID: <447B67BD.8070905@infowest.com> Date: Mon, 29 May 2006 15:29:33 -0600 From: Lorin Lund User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> In-Reply-To: Content-Type: multipart/mixed; boundary="------------000406020209040207090001" X-Mailman-Approved-At: Mon, 29 May 2006 22:20:45 +0000 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 21:31:37 -0000 This is a multi-part message in MIME format. --------------000406020209040207090001 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I'm running 6.1-RELEASE i386. Generic kernel. The wireless 'card' is a built-in Broadcom 802.11 b/g My PC is a Compaq V2607CL Turion based notebook I downloaded a driver kit from HP. It created c:\SWSetup\SP32158A\ In that folder I found bcmwl5.inf bcmwl5.sys bcmwl5npf.sys and lots of other files. The .INF file was UNICODE. But as far as I can tell the only special characters were in the [strings] section for various countries. I cut off all the other countries leaving just US and forced it to ASCII. ndiscvt gave no error messages. The make make install gave no error messages. I added an ndis linen to loader.conf to load the .ko dmesg shows no error messages. But it doesn't show ndis0: being recognized either. When I manually try kldload ndis it says it is already loaded. When I try ifconfig -a there is no ndis: When I try ifconfig ndis0: it says there is no interface. I don't know what else to try. --------------000406020209040207090001-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 22:20:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6555616A924 for ; Mon, 29 May 2006 22:20:49 +0000 (UTC) (envelope-from ask@develooper.com) Received: from x8.develooper.com (x8.develooper.com [216.52.237.208]) by mx1.FreeBSD.org (Postfix) with ESMTP id 13D2143D53 for ; Mon, 29 May 2006 22:20:49 +0000 (GMT) (envelope-from ask@develooper.com) Received: (qmail 8707 invoked from network); 29 May 2006 22:20:48 -0000 Received: from gw.develooper.com (HELO ?10.0.201.111?) (ask@cleverpeople.org@64.81.84.140) by smtp.develooper.com with (RC4-SHA encrypted) SMTP; 29 May 2006 22:20:48 -0000 Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: freebsd-questions@freebsd.org From: =?ISO-8859-1?Q?Ask_Bj=F8rn_Hansen?= Date: Mon, 29 May 2006 15:20:47 -0700 X-Mailer: Apple Mail (2.750) Subject: grub on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 22:20:59 -0000 Hi, I am trying to use grub instead of the usual boot0 thing on a Compact Flash card I use in Soekris and PC Engines WRAP systems. I installed grub from ports/sysutils/grub and put the package on my nanobsd system on the CF card. Booting on a Soekris box and running grub, I get this: grub> root (hd0,1) Filesystem type unknown, partition type 0xa5 grub> root (hd0,1,a) Filesystem type unknown, partition type 0xa5 It seems like it can't read the ufs filesystem? Any ideas? - ask -- http://www.askbjoernhansen.com/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 22:24:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 582D016B641 for ; Mon, 29 May 2006 22:24:31 +0000 (UTC) (envelope-from micahjon@ywave.com) Received: from relay1.av-mx.com (relay1.av-mx.com [137.118.16.126]) by mx1.FreeBSD.org (Postfix) with ESMTP id AB43D43D79 for ; Mon, 29 May 2006 22:24:30 +0000 (GMT) (envelope-from micahjon@ywave.com) X-Virus-Scan-Time: 0 Received: from [137.118.16.55] (HELO mx3.av-mx.com) by relay1.av-mx.com (CommuniGate Pro SMTP 4.2.10) with SMTP id 285754109 for freebsd-questions@freebsd.org; Mon, 29 May 2006 18:24:29 -0400 Received: (qmail 12471 invoked from network); 29 May 2006 22:24:29 -0000 Received: from dsl30019.ywave.com (HELO ?192.168.1.64?) (micahjon@ywave.com@216.227.117.19) by mx3.av-mx.com with SMTP; 29 May 2006 22:24:29 -0000 X-CLIENT-IP: 216.227.117.19 X-CLIENT-HOST: dsl30019.ywave.com Message-ID: <447B749A.90104@ywave.com> Date: Mon, 29 May 2006 15:24:26 -0700 From: Micah User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Aren Olvalde Tyr References: <20060522230755.3ec1b02e@devil.troback.com> <200605281626.06877.aren.tyr@gawab.com> <20060528224237.3c38da44@devil.troback.com> <200605292213.30611.aren.tyr@gawab.com> In-Reply-To: <200605292213.30611.aren.tyr@gawab.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Missing devs... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 22:24:42 -0000 Aren Olvalde Tyr wrote: > Hi > > On Sunday 28 May 2006 21:42, Anders Troback wrote: > >> In my usbd.conf I have: >> >> device "Sony Ericsson W810i" >> devname "umass[0-9]+" >> vendor 0x0fce >> product 0xe042 >> attach "sleep 5 ; /sbin/mount -t msdos /dev/da1 /mnt ; /etc/rc.d/devfs >> restart" >> >> As I said, this works for me but it seams to be a bit stupid that this >> kind of workaround is needed... > > Yes, indeed. I was thinking about doing a similar workaround, but surely there > must be a better way of doing this. We need a way for mount to automatically > probe the device for filesystems first before attempting to mount the slice. > > Anyone got any suggestions? > > Just out of interest, during bootup, what command is executed to probe the > devices? If I put a memory card in my reader before booting the system up, > the filesystem slices on the card are detected, the device node[s] are > created and I can mount it straight away. > > This is the command I want, rather than having to run a mount command that we > know will fail just to create the nodes. > > Aren. I've not been following this thread too closely, but I think I've had the same problem in the past. I currently get around it by not leaving my media readers plugged in (they're both external USB readers). I insert my media card then plug in the reader and have no problems. I *think* true > /dev/da1 will get devfs to show the slices, but I can't find my old post that has that little bit of info in it. I always thought the device should trigger and event when media was inserted, and that the event should trigger devfs to show the slices.... Hope that provides insight, Micah From owner-freebsd-questions@FreeBSD.ORG Mon May 29 23:34:51 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AAC0916A476 for ; Mon, 29 May 2006 23:34:51 +0000 (UTC) (envelope-from slidgey@yahoo.ca) Received: from web35707.mail.mud.yahoo.com (web35707.mail.mud.yahoo.com [66.163.179.161]) by mx1.FreeBSD.org (Postfix) with SMTP id 456C043D46 for ; Mon, 29 May 2006 23:34:51 +0000 (GMT) (envelope-from slidgey@yahoo.ca) Received: (qmail 15679 invoked by uid 60001); 29 May 2006 23:34:50 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.ca; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=xHP4GmSiZq9kQZN4nXWiAnmUCqkBmffb1R2D54aQZ6xB1VlUBmHe/MX8YRe55LYDAMdHEBSpj3Lhtw3+mgMLPaeyouaZD8hKJP91udbL1IPpxw9L0rFJIfltamH5HUDZKZxEGmTqno7kP/et/+4qqGpuiIqf3LJm9jD55gS45bQ= ; Message-ID: <20060529233450.15677.qmail@web35707.mail.mud.yahoo.com> Received: from [24.222.189.156] by web35707.mail.mud.yahoo.com via HTTP; Mon, 29 May 2006 19:34:50 EDT Date: Mon, 29 May 2006 19:34:50 -0400 (EDT) From: sara lidgey To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: freebsd 5.3, gmirror raid 1, PROBLEM X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 23:34:54 -0000 Hi All, I've been running a server using FreeBSD 5.3 and gmirror to mirror two identical IDE hard drives. Its been running great for over a year. But recently everything went down and when I reboot and put a monitor on it I get the following errors on screen: GEOM_MIRROR: Device gm0: provider ad1 disconnected GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed GEOM_MIRROR: Device gm0: rebuilding provider ad0 stopped Fatal trap 12: page fault while in kernel mode... (this is followed by details about the fault) These errors are preceded by other related error information that flys by on the screen and I have no way of seeing them again. Does anyone now what steps I should take to figure what is going on and try to recover data or get the machine to boot? Thanks so much, S. --------------------------------- All new Yahoo! Mail - --------------------------------- Get a sneak peak at messages with a handy reading pane. From owner-freebsd-questions@FreeBSD.ORG Mon May 29 23:39:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CC56F16A96F for ; Mon, 29 May 2006 23:39:02 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 885A943D72 for ; Mon, 29 May 2006 23:38:55 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so615689nzf for ; Mon, 29 May 2006 16:38:54 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=eiTaoyjf3yA4da31n/aYZGxusDwzcC/zV+itjnxq9hbw6/Eyp/ESdnnuIgLU3w0Ouk+IUFoq6vCFSth8co/5OuP8+AyH6zGuYriLLIceG7xRyjCkYPMZZvqmJnbQb8ecVUFtLlYdaWrodtNuKpLHbbJcizOIjGVy4D0Xg7FRc20= Received: by 10.36.38.4 with SMTP id l4mr2541790nzl; Mon, 29 May 2006 16:38:54 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Mon, 29 May 2006 16:38:54 -0700 (PDT) Message-ID: Date: Mon, 29 May 2006 18:38:54 -0500 From: "Nikolas Britton" To: "=?ISO-8859-1?Q?Ask_Bj=F8rn_Hansen?=" In-Reply-To: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> Cc: freebsd-questions@freebsd.org Subject: Re: grub on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 23:39:08 -0000 On 5/29/06, Ask Bj=F8rn Hansen wrote: > Hi, > > I am trying to use grub instead of the usual boot0 thing on a Compact > Flash card I use in Soekris and PC Engines WRAP systems. I installed > grub from ports/sysutils/grub and put the package on my nanobsd > system on the CF card. > > Booting on a Soekris box and running grub, I get this: > > grub> root (hd0,1) > Filesystem type unknown, partition type 0xa5 > > grub> root (hd0,1,a) > Filesystem type unknown, partition type 0xa5 > > It seems like it can't read the ufs filesystem? Any ideas? > > IIRC grub can't see UFS2, only UFS. I belive there is a work around though. google for it --=20 BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Mon May 29 23:42:00 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 267EF16AB17 for ; Mon, 29 May 2006 23:42:00 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms042pub.verizon.net (vms042pub.verizon.net [206.46.252.42]) by mx1.FreeBSD.org (Postfix) with ESMTP id DCF0543D76 for ; Mon, 29 May 2006 23:41:59 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.3] ([71.101.6.8]) by vms042.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J0100F3YWHY05W1@vms042.mailsrvcs.net> for questions@FreeBSD.org; Mon, 29 May 2006 18:41:59 -0500 (CDT) Date: Mon, 29 May 2006 19:42:43 -0400 From: Joe To: questions@FreeBSD.org Message-id: <447B86F3.6070500@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: Subject: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 23:42:03 -0000 Hi, I've read the documentation and it seems there's no pkg_upgrade or pkg_update, or a way to install an updated/upgraded package. I'd like to determine if that is indeed the case. I installed 6.0-RELEASE from a CD and then installed such packages as X.org and Firefox (using pkg_add -r). That gave me, for example, the latest Firefox that was available for 6.0-RELEASE, i.e., 1.0.7, but I wanted to install 1.5. However, when I downloaded the 1.5 .tbz from ftp.freebsd.org and tried to use pkg_add on it, it complained that Firefox was already installed. I then decided to upgrade the OS to 6.1-RELEASE via ftp by using sysinstall. AFAICT, the upgrade of the base system went OK (except for the fact that /etc/motd and uname still refer to 6.0-RELEASE). However, the installation of X.org packages did not go well, starting with errors in trying to install the expat package. The documentation mentions portupgrade and portmanager as mechanisms to upgrade ports, but if I'm not mistaken these invoke source updates, not a binary upgrade as was done for the OS. It appears that the only way to upgrade in binary form is to use pkg_delete -f to remove each package, e.g., expat 1.98, and then pkg_add to get the newer (2.0) version. And then you have to be extra careful with dependencies between packages. I don't have any major problems with upgrading from sources (assuming they build cleanly as expected), but I wanted to explore the binary upgrading route first to determine how easy it would be for someone without much technical abilities to install FreeBSD and some user packages and maintain it without getting involved in recompiling sources. Thanks for your assistance. Joe From owner-freebsd-questions@FreeBSD.ORG Mon May 29 23:51:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B154F16A474 for ; Mon, 29 May 2006 23:51:47 +0000 (UTC) (envelope-from benlutz@datacomm.ch) Received: from maxlor.mine.nu (c-213-160-32-54.customer.ggaweb.ch [213.160.32.54]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2AFF143D53 for ; Mon, 29 May 2006 23:51:46 +0000 (GMT) (envelope-from benlutz@datacomm.ch) Received: from localhost (unknown [127.0.0.1]) by maxlor.mine.nu (Postfix) with ESMTP id B946E2E07E; Tue, 30 May 2006 01:51:45 +0200 (CEST) X-Virus-Scanned: amavisd-new at atlantis.intranet Received: from maxlor.mine.nu ([127.0.0.1]) by localhost (atlantis.intranet [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 30XER2kUhNGW; Tue, 30 May 2006 01:51:45 +0200 (CEST) Received: from mini.intranet (mini.intranet [10.0.0.17]) by maxlor.mine.nu (Postfix) with ESMTP id 83AAC2E07D; Tue, 30 May 2006 01:51:45 +0200 (CEST) From: Benjamin Lutz To: freebsd-questions@freebsd.org Date: Tue, 30 May 2006 01:51:38 +0200 User-Agent: KMail/1.8.3 References: <447B86F3.6070500@freedomcircle.net> In-Reply-To: <447B86F3.6070500@freedomcircle.net> X-Face: $Ov27?7*N,h60fIEfNJdb!m,@#4T/d; 1hw|W0zvsHM(a$Yn6BYQ0^SEEXvi8>D`|V*F"=?iso-8859-1?q?=5F+R=0A?= 2@Aq>+mNb4`,'[[%z9v0Fa~]AD1}xQO3|>b.z&}l#R-_(P`?@Mz"kS; XC>Eti,i3>%@g?4f,=?iso-8859-1?q?=5Cc7=7CGh=0A?= =?iso-8859-1?q?_wb=26ky=24b2PJ=5E=5C0b83NkLsFKv=7CsmL/cI4UD=25Tu8alAD?= MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart9916830.crpbD5AmJP"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605300151.42563.benlutz@datacomm.ch> Cc: Joe Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 23:51:57 -0000 --nextPart9916830.crpbD5AmJP Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Tuesday 30 May 2006 01:42, Joe wrote: > Hi, > > I've read the documentation and it seems there's no pkg_upgrade or > pkg_update, or a way to install an updated/upgraded package. I'd like > to determine if that is indeed the case. > > [...] > > The documentation mentions portupgrade and portmanager as mechanisms to > upgrade ports, but if I'm not mistaken these invoke source updates, not > a binary upgrade as was done for the OS. It appears that the only way > to upgrade in binary form is to use pkg_delete -f to remove each > package, e.g., expat 1.98, and then pkg_add to get the newer (2.0) > version. And then you have to be extra careful with dependencies > between packages. > > [...] portupgrade actually does support packages as well. Use the --use-packages= =20 switch. It will look for local packages, remote packages, and if both fail,= =20 fall back to compiling the ports. Cheers Benjamin --nextPart9916830.crpbD5AmJP Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQBEe4kOgShs4qbRdeQRApXVAJ4ognvfnbDeCwc+zNz2ikK/cT+5/gCff3+E ZnObumnnFBpfc9iYWLgH+YA= =/qrm -----END PGP SIGNATURE----- --nextPart9916830.crpbD5AmJP-- From owner-freebsd-questions@FreeBSD.ORG Mon May 29 23:53:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D12A216ACE1 for ; Mon, 29 May 2006 23:53:52 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id E07EA43D62 for ; Mon, 29 May 2006 23:53:49 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 8143 invoked from network); 30 May 2006 09:53:48 +1000 Received: from 203-217-63-189.dyn.iinet.net.au (HELO localhost) (203.217.63.189) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 30 May 2006 09:53:48 +1000 Date: Tue, 30 May 2006 09:53:44 +1000 From: Norberto Meijome To: "Iantcho Vassilev" Message-ID: <20060530095344.2e8db744@localhost> In-Reply-To: <18e02bd30605290931i6fb55892h634b55201b50d60f@mail.gmail.com> References: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> <20060529231524.0f76b3ba@localhost> <18e02bd30605290931i6fb55892h634b55201b50d60f@mail.gmail.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: FreeBSD Mailing List Subject: Re: geli resilience to power outages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 May 2006 23:53:54 -0000 On Mon, 29 May 2006 16:31:38 +0000 "Iantcho Vassilev" wrote: > On 5/29/06, Norberto Meijome wrote: > > > > On Mon, 29 May 2006 14:43:46 +0300 > > "Iantcho Vassilev" wrote: > > > > > DO someone know if and how GELI is resilience to power outages? > > > > > > Does the box is still encrypted? After reboot what would happen to fcsk? > > > > Hi Iantcho , > > I dont know for a fact the effect with a power outage, but I use it quite > > a lot > > on laptops (which a) freeze sometimes out of nowhere , and b) sometimes > > dont > > resume properly,). In both situations, I've usually had geli mounted > > disks (1 > > x 6 GB, 1 x 500 MB) running when the events happened. ( as well as a 4 GB > > swap > > which is also GELI backed) > > > > They (touch wood) haven't suffered data loss. /usr and /var seem be more > > affected by this ungraceful shutdowns than the .eli devices. > > > > I suppose it's all cool thanks to soft-updates, and the fact that GELI > > encrypts > > on a per block basis (yeah, no more pgp-busted disks like in Windows :) ). > > > > good luck, > > Beto > > > Thanks for the input,Beto.. > > As i didn`t read the GELI "workbook" definitely read man geli , man geom_geli, and the handbook section...and play with it until you feel comfortable with it. > can you tell be can i convert existing > partition in GELI or i should repartition? depends what you want to do. If you want to create a file-backed GELI encrypted file (similar to a PGP Disk in Windows), then you dont need to touch your partitions at all - simply create the file. If you want to have, for example, /usr encrypted, then you need, /dev/ad0s1f.eli instead of . /dev/ad0s1f - you dont believe you need to repartition, but you'll need to wipe all the data and to encrypt the device. Read the docs. Beto From owner-freebsd-questions@FreeBSD.ORG Tue May 30 00:15:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BCEA116A7D7 for ; Tue, 30 May 2006 00:15:35 +0000 (UTC) (envelope-from gil@asol.com.ph) Received: from mail.asol.com.ph (mx1.asol.com.ph [203.190.72.164]) by mx1.FreeBSD.org (Postfix) with SMTP id 75E1643D46 for ; Tue, 30 May 2006 00:15:33 +0000 (GMT) (envelope-from gil@asol.com.ph) Received: (qmail 13602 invoked by uid 1010); 29 May 2006 21:20:55 -0000 Received: from 203.175.3.20 by mail.asol.com.ph (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/1356. spamassassin: 3.1.1. perlscan: 1.25-st-qms. Clear:RC:1(203.175.3.20):. Processed in 0.157582 secs); 29 May 2006 21:20:55 -0000 X-Antivirus-ASPI-Mail-From: gil@asol.com.ph via mail.asol.com.ph X-Antivirus-ASPI: 1.25-st-qms (Clear:RC:1(203.175.3.20):. Processed in 0.157582 secs Process 13596) Received: from iceman.onsite.at.pccb.com.ph (HELO louigi) (gil@asol.com.ph@203.175.3.20) by mail.asol.com.ph with SMTP; 29 May 2006 21:20:55 -0000 Message-ID: <002701c68367$0ddb3de0$1403afcb@louigi> From: "GiL Virtucio" To: References: <20060525145312.50581.qmail@web53406.mail.yahoo.com> <20060529092932.GB61608@sysadm.stc> Date: Tue, 30 May 2006 05:30:04 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Subject: Re: Spam problem! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 00:15:41 -0000 Spam?i love spam :) it's very yummy on wheat bread and it's even better if you add egg and cheese :P ======================================= Gil A. Virtucio Janitor/Kolektor/Messenger/Driver Asia Solution Phillippines Inc. 28/F Antel Global Corporate Center 3 Doña Julia Vargas Avenue, Ortigas Center, Pasig Mobile # : +63-916-3989695 ======================================= > On Thu, May 25, 2006 at 07:53:12AM -0700, Olga Zenkova wrote: > > mailboxes with field "To: user3" in it. There are no > > user1 or user2 in this field. Is it possible to cut > > off these letters? Especially it is difficult to > > explain for user1 and user2 why they got letters > > addressed not for them From owner-freebsd-questions@FreeBSD.ORG Tue May 30 00:25:36 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D860816A4C0 for ; Tue, 30 May 2006 00:25:36 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9BC1A43D46 for ; Tue, 30 May 2006 00:25:36 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 851A11A3C2C; Mon, 29 May 2006 17:25:36 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id E9E11514E7; Mon, 29 May 2006 20:25:35 -0400 (EDT) Date: Mon, 29 May 2006 20:25:35 -0400 From: Kris Kennaway To: Joe Message-ID: <20060530002535.GA94917@xor.obsecurity.org> References: <447B86F3.6070500@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="9jxsPFA5p3P2qPhR" Content-Disposition: inline In-Reply-To: <447B86F3.6070500@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 00:25:39 -0000 --9jxsPFA5p3P2qPhR Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, May 29, 2006 at 07:42:43PM -0400, Joe wrote: > Hi, >=20 > I've read the documentation and it seems there's no pkg_upgrade or=20 > pkg_update, or a way to install an updated/upgraded package. I'd like=20 > to determine if that is indeed the case. portupgrade -P or -PP Kris --9jxsPFA5p3P2qPhR Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEe5D/Wry0BWjoQKURApGTAJ4r3FEbGDe/3WKxUTPwn1lUWStbFgCeKuH5 NkaAv74clth0xJqg+TYoLJU= =8EX7 -----END PGP SIGNATURE----- --9jxsPFA5p3P2qPhR-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 00:30:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4779C16A701 for ; Tue, 30 May 2006 00:30:57 +0000 (UTC) (envelope-from drosih@rpi.edu) Received: from smtp5.server.rpi.edu (smtp1.server.rpi.edu [128.113.2.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id C782943D46 for ; Tue, 30 May 2006 00:30:56 +0000 (GMT) (envelope-from drosih@rpi.edu) Received: from [128.113.24.47] (gilead.netel.rpi.edu [128.113.24.47]) by smtp5.server.rpi.edu (8.13.1/8.13.1) with ESMTP id k4U0Upkg015175; Mon, 29 May 2006 20:30:52 -0400 Mime-Version: 1.0 Message-Id: In-Reply-To: References: Date: Mon, 29 May 2006 20:30:49 -0400 To: "Pelle Andersson" , From: Garance A Drosihn Content-Type: text/plain; charset="us-ascii" ; format="flowed" X-CanItPRO-Stream: default X-RPI-SA-Score: undef - spam-scanning disabled X-Scanned-By: CanIt (www . canit . ca) Cc: Subject: Re: Newsyslog problem using Apache 2.2.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 00:31:00 -0000 At 8:22 AM +0200 5/29/06, Pelle Andersson wrote: >A number of days ago I sucessfully upgraded Apache from 2.0.x >series to 2.2.x series. > >Everything worked perfekt except newsyslog. I'm using the >following in newsyslog.conf (worked perfect in Apache 2.0.x): > >/var/log/apache/*.log root:wheel 640 7 * $D05 GZB /var/run/httpd.pid 30 > >The error that returns is this: >"newsyslog: log /var/log/apache/httpd-error.log.0 not compressed because >daemon(s) not notified" >"newsyslog: can't notify daemon, pid 30076: No such process" Your entry in newsyslog.conf tells newsyslog that it should look at the file /var/run/httpd.pid to find the active apache process. Newsyslog read that file when it needed to rotate the log files, and it found the number "30076" in that file. However, there was no process 30076 running at that time. Therefore, newsyslog has to assume that whatever process *is* writing to that file has not been notified that the file has changed. So it will not compress the httpd-error.log.0 file. So, you need to find out where the new version of apache is storing the active process-id (pid) for itself. -- Garance Alistair Drosehn = gad@gilead.netel.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu From owner-freebsd-questions@FreeBSD.ORG Tue May 30 01:30:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A330D16A467 for ; Tue, 30 May 2006 01:30:26 +0000 (UTC) (envelope-from aaronvan@comcast.net) Received: from rwcrmhc11.comcast.net (rwcrmhc11.comcast.net [204.127.192.81]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4AA6E43D46 for ; Tue, 30 May 2006 01:30:25 +0000 (GMT) (envelope-from aaronvan@comcast.net) Received: from [192.168.1.100] (c-67-180-170-102.hsd1.ca.comcast.net[67.180.170.102]) by comcast.net (rwcrmhc11) with SMTP id <20060530013025m1100k0b15e>; Tue, 30 May 2006 01:30:25 +0000 User-Agent: Microsoft-Entourage/11.2.3.060209 Date: Mon, 29 May 2006 18:26:27 -0700 From: Aaron VanAlstine To: "freebsd-questions@freebsd.org" Message-ID: Thread-Topic: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? Thread-Index: AcaDiBInUPPBXe97Edqf3gAFAmHJOg== Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Subject: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 01:30:28 -0000 Folks, I have an ASUS P5LD2 mobo with a Marvell 88E8053 PCIe Gigabit LAN controller. FreeBSD doesn't seem to recognize it. Should the LAN controller work out of the box or am I missing a driver? ifconfig returns plip0: and lo0: with their respective flags. Sysinstall says plip0 is an "unknown interface type." The speed LED is orange indicating a 100 Mbps connection, but the act/link is off. My ISP supports DHCP. Thanks! -- Aaron VanAlstine From owner-freebsd-questions@FreeBSD.ORG Tue May 30 01:33:33 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0052116A475 for ; Tue, 30 May 2006 01:33:32 +0000 (UTC) (envelope-from gil@asol.com.ph) Received: from mail.asol.com.ph (mx1.asol.com.ph [203.190.72.164]) by mx1.FreeBSD.org (Postfix) with SMTP id CADC043D48 for ; Tue, 30 May 2006 01:33:31 +0000 (GMT) (envelope-from gil@asol.com.ph) Received: (qmail 19995 invoked by uid 1010); 30 May 2006 01:25:34 -0000 Received: from 203.208.25.30 by mail.asol.com.ph (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/1356. spamassassin: 3.1.1. perlscan: 1.25-st-qms. Clear:RC:0(203.208.25.30):SA:0(-2.5/5.0):. Processed in 5.717949 secs); 30 May 2006 01:25:34 -0000 X-Spam-Status: No, hits=-2.5 required=5.0 X-Antivirus-ASPI-Mail-From: gil@asol.com.ph via mail.asol.com.ph X-Antivirus-ASPI: 1.25-st-qms (Clear:RC:0(203.208.25.30):SA:0(-2.5/5.0):. Processed in 5.717949 secs Process 19943) Received: from unknown (HELO loui) (gil@asol.com.ph@203.208.25.30) by mail.asol.com.ph with SMTP; 30 May 2006 01:25:28 -0000 Message-ID: <016a01c68389$0a99fd20$5ac8a8c0@loui> From: "GiL A. Virtucio" To: "Marwan Sultan" References: Date: Tue, 30 May 2006 09:33:19 +0800 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=response Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Cc: questions@freebsd.org Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 01:33:34 -0000 to restrict users from navigating outside their home directories through FTP try using an FTP server that support chrooting. you might want to check proftpd. http://www.proftpd.org/ it is also included in the ports collection. hope this helps :) ================================= Gil A. Virtucio Janitor/Kolektor/Messenger/Driver Asia Solution Phillippines Inc. 28/F Antel Global Corporate Center 3 Doña Julia Vargas Avenue, Ortigas Center, Pasig Office # : +63-2-687-0692 loc. 103 Mobile # : +63-916-3989695 http://www.gihl.eu.org/ ================================= ----- Original Message ----- From: "Marwan Sultan" To: Sent: Tuesday, May 30, 2006 5:15 AM Subject: User Access restriction. > Hello Everyone, > > I have a server Up and running, 4.8-R, (well why 4.8? its up since years) > However, this server is for commercial use, recently, we started Home > pages hosting, > which requier me to give the user access to the shell, > > Well, the question, > > Lets say, I have 2 groups, Group1, Group2 > under Groupe1 is the webpages shell accounts (user accounts) > and group2, just shell users, > > If user1 from Group1 will ftp or ssh to the box, his default home path > will be > /home/group1/user1 > But, he still can navigate thro his FTP or ssh to see the directories and > read files of group1 or > group2, and play around lilbit, > > PLEASE how to restrict this user from going outside his shell account and > restrict him from > viewing others folders and webpages ? If i will chmod to something > limited, then even when > he browse the web to his webpage it wont work, > > So how to have the restriction in the same time viewing his web thro any > browser worldwide? > > Sorry for the long email. > > Thank you, > Marwan > > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Tue May 30 02:54:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7B8E516A4C1 for ; Tue, 30 May 2006 02:54:11 +0000 (UTC) (envelope-from jason.self@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.188]) by mx1.FreeBSD.org (Postfix) with ESMTP id E1D2143D48 for ; Tue, 30 May 2006 02:54:10 +0000 (GMT) (envelope-from jason.self@gmail.com) Received: by nf-out-0910.google.com with SMTP id p48so314021nfa for ; Mon, 29 May 2006 19:54:09 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=ug1MTKXJ4TYVbVQbf897NmT34u0lrQsDVnan/gZSDAD+ON8wY7fSAyOo6yyact1z2opoVVP5HRbvDjCP2gnen7eycPYBDeqzP7UYhvmpjp5A/AZnkowrm4jVBg+/B/BjJ07fXxRNxd/7U3dWXy9U4ebC8wKONMeQnW8P1fNu1y4= Received: by 10.48.207.5 with SMTP id e5mr2193597nfg; Mon, 29 May 2006 19:47:32 -0700 (PDT) Received: by 10.49.15.12 with HTTP; Mon, 29 May 2006 19:47:32 -0700 (PDT) Message-ID: Date: Mon, 29 May 2006 19:47:32 -0700 From: "Jason Self" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: 6.1-RELEASE for PPC ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 02:54:12 -0000 I've read the announcement about FreeBSD 6.1-RELEASE from http://www.freebsd.org/releases/6.1R/announce.html and decided to download it. "FreeBSD 6.1-RELEASE supports the i386, pc98, alpha, sparc64, amd64, powerpc, and ia64 architectures..." But... 6.1 doesn't seem to exist for PPC??? The PPC link at http://www.freebsd.org/where.html points to ftp://ftp.freebsd.org/pub/FreeBSD/releases/ppc/ISO-IMAGES/6.1/ which doesn't exist. In addition, there are no 6.1 torrents for PPC, and none of the mirrors seem to contain ISOs or torrents either. Am I missing something? From owner-freebsd-questions@FreeBSD.ORG Tue May 30 03:52:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EDA0716A5BA for ; Tue, 30 May 2006 03:52:49 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id AD84C43D46 for ; Tue, 30 May 2006 03:52:49 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 910871A3C33; Mon, 29 May 2006 20:52:49 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 89F8D51734; Mon, 29 May 2006 23:52:48 -0400 (EDT) Date: Mon, 29 May 2006 23:52:48 -0400 From: Kris Kennaway To: Jason Self Message-ID: <20060530035248.GA98483@xor.obsecurity.org> References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="MGYHOYXEY6WxJCY8" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.4.2.1i Cc: freebsd-questions@freebsd.org Subject: Re: 6.1-RELEASE for PPC ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 03:52:53 -0000 --MGYHOYXEY6WxJCY8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, May 29, 2006 at 07:47:32PM -0700, Jason Self wrote: > I've read the announcement about FreeBSD 6.1-RELEASE from > http://www.freebsd.org/releases/6.1R/announce.html and decided to > download it. >=20 > "FreeBSD 6.1-RELEASE supports the i386, pc98, alpha, sparc64, amd64, > powerpc, and ia64 architectures..." >=20 > But... 6.1 doesn't seem to exist for PPC??? Ask on the PPC list. Probably the PPC project needs additional developers though. This would be a great opportunity for someone who cares about FreeBSD/PPC to step up and become involved. Kris --MGYHOYXEY6WxJCY8 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEe8GPWry0BWjoQKURAlviAJ9nYPs/0GK5OpmYGwJaRSSJvc7B3QCg/qMH GAp+CQnPEBWCr4wiajgrLJk= =idAr -----END PGP SIGNATURE----- --MGYHOYXEY6WxJCY8-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 03:53:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9CE0E16A539 for ; Tue, 30 May 2006 03:53:32 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id A7F4D43D58 for ; Tue, 30 May 2006 03:53:31 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 22366 invoked by uid 507); 30 May 2006 13:53:29 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 30 May 2006 13:53:29 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <447AF91C.10106@daleco.biz> References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Tue, 30 May 2006 13:53:29 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 03:53:34 -0000 On 29/05/2006, at 11:37 PM, Kevin Kinsey wrote: > Malcolm Fitzgerald wrote: >> On 29/05/2006, at 1:10 PM, Kevin Kinsey wrote: >>> Malcolm Fitzgerald wrote: >>>> I am running freeBSD v6.0 security on a home network behind an adsl >>>> router. I cannot connect to localhost from a browser (apache is >>>> running!) >>>> I cannot connect to localhost port 22 (KPackage tries to use ssh) >>>> What can cause these problems? How can I troubleshoot them? >>>> I am very new to freeBSD, so part of my question is "where do I >>>> begin?". I have a copy of Complete freeBSD beside me but can't get >>>> the magical incantations right. Suggestions appreciated. >>> >>> New to "Nix like" systems in general, or just new to FreeBSD? >>> >>> Here are a few suggestions ... no "magic bullet" here, though: >>> >>> First, check to see if the interface exists: >>> >>> $ ifconfig lo0 >>> lo0: flags=8049 mtu 16384 >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 >>> inet 127.0.0.1 netmask 0xff000000 >>> >>> So, we have a loopback interface (in this case on both IPv4 >>> and IPv6). >> bsd-box# ifconfig -a >> rl0: flags=8843 mtu 1500 >> options=8 >> inet6 fe80::2e0:4cff:fe08:e02a%rl0 prefixlen 64 scopeid 0x1 >> inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255 >> ether 00:e0:4c:08:e0:2a >> media: Ethernet autoselect (100baseTX ) >> status: active >> plip0: flags=108810 mtu 1500 >> lo0: flags=8008 mtu 16384 > > Hmm, is that all? Unusual; I'd think the loopback _should_ be set > up correctly. > > `ifconfig lo0 -inet 127.0.0.1 netmask 255.255.255.0` ?? > > > If that fixes it, then we have to figure out *why* it's not being > doing automatically. Problem during init/rc, most likely ... weird. Running that command returns this: ifconfig: -inet: bad value malcolm From owner-freebsd-questions@FreeBSD.ORG Tue May 30 04:14:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1673F16A912 for ; Tue, 30 May 2006 04:14:32 +0000 (UTC) (envelope-from vvelox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id CF96B43D4C for ; Tue, 30 May 2006 04:14:31 +0000 (GMT) (envelope-from vvelox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id DC34014DA79 for ; Mon, 29 May 2006 21:14:30 -0700 (PDT) Date: Mon, 29 May 2006 23:15:30 -0500 From: "Z.C.B." To: freebsd-questions@freebsd.org Message-ID: <20060529231530.14bf1825@vixen42.vulpes> In-Reply-To: References: X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 04:14:33 -0000 On Mon, 29 May 2006 18:26:27 -0700 Aaron VanAlstine wrote: > Folks, > > I have an ASUS P5LD2 mobo with a Marvell 88E8053 PCIe Gigabit LAN > controller. FreeBSD doesn't seem to recognize it. Should the LAN > controller work out of the box or am I missing a driver? > > ifconfig returns plip0: and lo0: with their respective flags. > Sysinstall says plip0 is an "unknown interface type." The speed LED > is orange indicating a 100 Mbps connection, but the act/link is > off. My ISP supports DHCP. IIRC that is the Yukon chipset. I have one on my laptop and it does not work. They have a binary package for it and they released the source under BSDL for it as well. The problem I have with it is it does not detect the carrier. Check around on the lists and you will find a link to the source. You can find the binary driver on their site. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 04:26:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A9FE716A4FC for ; Tue, 30 May 2006 04:26:29 +0000 (UTC) (envelope-from dev@unixdaemon.org) Received: from spunkymail-a17.dreamhost.com (mailbigip.dreamhost.com [208.97.132.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6F91A43D48 for ; Tue, 30 May 2006 04:26:29 +0000 (GMT) (envelope-from dev@unixdaemon.org) Received: from dracula.transylvania.net (cpe-66-24-108-216.stny.res.rr.com [66.24.108.216]) by spunkymail-a17.dreamhost.com (Postfix) with ESMTP id 3C00E74486; Mon, 29 May 2006 21:26:27 -0700 (PDT) From: Dev Tugnait To: Aaron VanAlstine In-Reply-To: References: Content-Type: text/plain Date: Tue, 30 May 2006 00:26:25 -0400 Message-Id: <1148963185.1234.20.camel@dracula.transylvania.net> Mime-Version: 1.0 X-Mailer: Evolution 2.6.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: "freebsd-questions@freebsd.org" Subject: Re: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: dev@unixdaemon.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 04:26:31 -0000 yes it does the driver is myk ... you need to download it yourself. On Mon, 2006-05-29 at 18:26 -0700, Aaron VanAlstine wrote: > Folks, > > I have an ASUS P5LD2 mobo with a Marvell 88E8053 PCIe Gigabit LAN > controller. FreeBSD doesn't seem to recognize it. Should the LAN controller > work out of the box or am I missing a driver? > > ifconfig returns plip0: and lo0: with their respective flags. Sysinstall > says plip0 is an "unknown interface type." The speed LED is orange > indicating a 100 Mbps connection, but the act/link is off. My ISP supports > DHCP. > > Thanks! > > -- Aaron VanAlstine > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Dev Tugnait From owner-freebsd-questions@FreeBSD.ORG Tue May 30 05:35:57 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CE3B016A42A for ; Tue, 30 May 2006 05:35:57 +0000 (UTC) (envelope-from njt@ayvali.org) Received: from starfish.geekisp.com (starfish.geekisp.com [216.168.135.166]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4429343D4C for ; Tue, 30 May 2006 05:35:56 +0000 (GMT) (envelope-from njt@ayvali.org) Received: (qmail 7463 invoked by uid 1003); 30 May 2006 05:35:55 -0000 Received: from clam.int.geekisp.com (HELO clam.geekisp.com) (192.168.4.38) by mail.geekisp.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 30 May 2006 05:35:55 -0000 Received: from clam.geekisp.com (njt@localhost.geekisp.com [127.0.0.1]) by clam.geekisp.com (8.13.4/8.12.11) with ESMTP id k4U5ZqCZ000093; Tue, 30 May 2006 01:35:52 -0400 (EDT) Received: (from njt@localhost) by clam.geekisp.com (8.13.4/8.13.3/Submit) id k4U5Zp2J031036; Tue, 30 May 2006 01:35:51 -0400 (EDT) X-Authentication-Warning: clam.geekisp.com: njt set sender to njt@ayvali.org using -f Date: Tue, 30 May 2006 01:35:48 -0400 From: "N.J. Thomas" To: Kyrre Nygard Message-ID: <20060530053548.GB3413@ayvali.org> References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <200605270046.04333.beech@alaskaparadise.com> <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> User-Agent: Mutt/1.5.9i Cc: questions@freebsd.org Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 05:36:21 -0000 * Kyrre Nygard [2006-05-27 11:12:19 +0200]: > > > I have a team of designers working on web 2.0 like sites. > > > > > > I have added them all to this box, now I'm wondering what's the > > > most convenient way of giving them all access to /usr/local/www? > > > CVS is your friend. > > Yeah I hear a lot of people like CVS. > > But I fail to realize how it might assist me though. Kyrre, CVS is a version control tool. A version control tool manages changes to information, sometimes among multiple people. It sounds like to me like you really need a version control tool for what you want to do. CVS is a good choice for this, Subversion is better. Yes, there might be scripts that accomplish this, but most (good) version control tools will: - allow you to manage changes to data over time - remember every change ever made to your data, allowing you to recover older versions, or see the history of how it changed - allow access across networks, which allows it to be used by people on different computers - give you the ability for various people to modify and manage (i.e. collaborate on) the same set of data from their respective locations (The above was paraphrased from "Version Control with Subversion", by Collins-Sussman, Fitzpatrick, and Pilato, v1.2, Ch 1.) You will run into this problem over and over again. Do yourself a favor and learn how to use a good version control system now, or else you will find yourself doomed to reinvent it, poorly. (Apologies to H. Spencer.) Thomas -- N.J. Thomas njt@ayvali.org Etiamsi occiderit me, in ipso sperabo From owner-freebsd-questions@FreeBSD.ORG Tue May 30 06:33:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B7FA916A425 for ; Tue, 30 May 2006 06:33:06 +0000 (UTC) (envelope-from imran@darkstar.thelakecity.com.pk) Received: from darkstar.thelakecity.com.pk (darkstar.thelakecity.com.pk [202.59.74.139]) by mx1.FreeBSD.org (Postfix) with ESMTP id C818343D4C for ; Tue, 30 May 2006 06:33:05 +0000 (GMT) (envelope-from imran@darkstar.thelakecity.com.pk) Received: from darkstar.thelakecity.com.pk (localhost [127.0.0.1]) by darkstar.thelakecity.com.pk (8.13.3/8.13.3) with ESMTP id k4U68BSQ044493 for ; Tue, 30 May 2006 11:08:17 +0500 (PKT) (envelope-from imran@darkstar.thelakecity.com.pk) Received: (from root@localhost) by darkstar.thelakecity.com.pk (8.13.3/8.13.3/Submit) id k4U68BTh044492 for freebsd-questions@freebsd.org; Tue, 30 May 2006 11:08:11 +0500 (PKT) (envelope-from imran) Date: Tue, 30 May 2006 11:08:11 +0500 (PKT) From: Imran Imtiaz Message-Id: <200605300608.k4U68BTh044492@darkstar.thelakecity.com.pk> To: freebsd-questions@freebsd.org Subject: squid questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 06:33:06 -0000 I'm running squid on my freebsd but in the log most of the pages are TCP_MISS is that fine aur I'll have to tune squid a bit more. Most of the configurations are default. Regards, Imran From owner-freebsd-questions@FreeBSD.ORG Tue May 30 06:33:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8FAD516A421 for ; Tue, 30 May 2006 06:33:09 +0000 (UTC) (envelope-from imran@darkstar.thelakecity.com.pk) Received: from darkstar.thelakecity.com.pk (darkstar.thelakecity.com.pk [202.59.74.139]) by mx1.FreeBSD.org (Postfix) with ESMTP id AC5E143D4C for ; Tue, 30 May 2006 06:33:07 +0000 (GMT) (envelope-from imran@darkstar.thelakecity.com.pk) Received: from darkstar.thelakecity.com.pk (localhost [127.0.0.1]) by darkstar.thelakecity.com.pk (8.13.3/8.13.3) with ESMTP id k4U5mPgC043110 for ; Tue, 30 May 2006 10:48:26 +0500 (PKT) (envelope-from imran@darkstar.thelakecity.com.pk) Received: (from root@localhost) by darkstar.thelakecity.com.pk (8.13.3/8.13.3/Submit) id k4U5mMOC043109 for freebsd-questions@freebsd.org; Tue, 30 May 2006 10:48:22 +0500 (PKT) (envelope-from imran) Date: Tue, 30 May 2006 10:48:22 +0500 (PKT) From: Imran Imtiaz Message-Id: <200605300548.k4U5mMOC043109@darkstar.thelakecity.com.pk> To: freebsd-questions@freebsd.org Subject: why dns timeout error is occuring X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 06:33:09 -0000 I am having a local dns server that resolves the ips for my lan but when it try to resolve an ip it give me dns timeout error and also resolves the IP what can the the problem, below is the output of nslookup command on windows. C:\Documents and Settings\Imran>nslookup bsd.thelakecity.com.pk Server: darkstar.thelakecity.com.pk Address: 192.168.0.3 DNS request timed out. timeout was 2 seconds. Name: darkstar.thelakecity.com.pk Address: 192.168.0.3 Aliases: bsd.thelakecity.com.pk regards, Imran From owner-freebsd-questions@FreeBSD.ORG Tue May 30 06:52:38 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 538EF16A421 for ; Tue, 30 May 2006 06:52:38 +0000 (UTC) (envelope-from vayu@sklinks.com) Received: from smtp109.sbc.mail.mud.yahoo.com (smtp109.sbc.mail.mud.yahoo.com [68.142.198.208]) by mx1.FreeBSD.org (Postfix) with SMTP id 058AD43D48 for ; Tue, 30 May 2006 06:52:37 +0000 (GMT) (envelope-from vayu@sklinks.com) Received: (qmail 90286 invoked from network); 30 May 2006 06:52:37 -0000 Received: from unknown (HELO ?10.0.0.69?) (varuna@sbcglobal.net@69.106.224.82 with plain) by smtp109.sbc.mail.mud.yahoo.com with SMTP; 30 May 2006 06:52:37 -0000 Mime-Version: 1.0 (Apple Message framework v749) Content-Transfer-Encoding: 7bit Message-Id: <6E061A38-2840-493A-9808-137F4688E3C4@sklinks.com> Content-Type: text/plain; charset=US-ASCII; format=flowed To: freebsd-questions@freebsd.org From: vayu Date: Mon, 29 May 2006 23:52:34 -0700 X-Mailer: Apple Mail (2.749) Subject: XGL / compiz X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 06:52:38 -0000 Anyone know how to get these working on FreeBSD? From owner-freebsd-questions@FreeBSD.ORG Tue May 30 07:28:41 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6417816A41F for ; Tue, 30 May 2006 07:28:41 +0000 (UTC) (envelope-from freebsd@amadeus.demon.nl) Received: from post-25.mail.nl.demon.net (post-25.mail.nl.demon.net [194.159.73.195]) by mx1.FreeBSD.org (Postfix) with ESMTP id 023EA43D4C for ; Tue, 30 May 2006 07:28:40 +0000 (GMT) (envelope-from freebsd@amadeus.demon.nl) Received: from amadeus.demon.nl ([82.161.18.200]:55383 helo=[10.0.1.2]) by post-25.mail.nl.demon.net with esmtp (Exim 4.51) id 1Fkyec-0007B4-Pg; Tue, 30 May 2006 07:28:39 +0000 In-Reply-To: <016a01c68389$0a99fd20$5ac8a8c0@loui> References: <016a01c68389$0a99fd20$5ac8a8c0@loui> Mime-Version: 1.0 (Apple Message framework v750) X-Priority: 3 Content-Type: text/plain; charset=ISO-8859-1; delsp=yes; format=flowed Message-Id: <35B89C88-8B35-4B97-86FF-5DA4DC8D3CC9@amadeus.demon.nl> Content-Transfer-Encoding: quoted-printable From: usergroup Date: Tue, 30 May 2006 09:28:37 +0200 To: GiL A. Virtucio X-Mailer: Apple Mail (2.750) Cc: questions@freebsd.org, Marwan Sultan Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 07:28:41 -0000 On 30 mei 2006, at 03:33, GiL A. Virtucio wrote: > to restrict users from navigating outside their home directories =20 > through FTP try using an FTP server that support chrooting. you =20 > might want to check proftpd. http://www.proftpd.org/ > it is also included in the ports collection. > > hope this helps :) > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > Gil A. Virtucio > Janitor/Kolektor/Messenger/Driver > Asia Solution Phillippines Inc. > 28/F Antel Global Corporate Center > 3 Do=F1a Julia Vargas Avenue, > Ortigas Center, Pasig > Office # : +63-2-687-0692 loc. 103 > Mobile # : +63-916-3989695 > http://www.gihl.eu.org/ > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > ----- Original Message ----- From: "Marwan Sultan" =20 > > To: > Sent: Tuesday, May 30, 2006 5:15 AM > Subject: User Access restriction. > > >> Hello Everyone, >> >> I have a server Up and running, 4.8-R, (well why 4.8? its up =20 >> since years) >> However, this server is for commercial use, recently, we started =20 >> Home pages hosting, >> which requier me to give the user access to the shell, >> >> Well, the question, >> >> Lets say, I have 2 groups, Group1, Group2 >> under Groupe1 is the webpages shell accounts (user accounts) >> and group2, just shell users, >> >> If user1 from Group1 will ftp or ssh to the box, his default home =20= >> path will be >> /home/group1/user1 >> But, he still can navigate thro his FTP or ssh to see the =20 >> directories and read files of group1 or >> group2, and play around lilbit, >> >> PLEASE how to restrict this user from going outside his shell =20 >> account and restrict him from >> viewing others folders and webpages ? If i will chmod to something =20= >> limited, then even when >> he browse the web to his webpage it wont work, >> >> So how to have the restriction in the same time viewing his web =20 >> thro any browser worldwide? >> >> Sorry for the long email. >> >> Thank you, >> Marwan >> >> or have a look at "man ftpchroot" Arno From owner-freebsd-questions@FreeBSD.ORG Tue May 30 07:41:46 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4742016A422 for ; Tue, 30 May 2006 07:41:46 +0000 (UTC) (envelope-from dimitar.vassilev@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.186]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9F90343D46 for ; Tue, 30 May 2006 07:41:45 +0000 (GMT) (envelope-from dimitar.vassilev@gmail.com) Received: by nf-out-0910.google.com with SMTP id a27so163048nfc for ; Tue, 30 May 2006 00:41:44 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=blgo5By8F0EocUTuKulcmTM2q655SLyOzrDfjaYvHLItH9llE5/S0pwX/IrAdMftqYpHkBOV/gomKInPbEnnNUgh9nTUDGimvmZkf74xhsAfkMvKivW+kVllvSgOITdbtAOY63wOq3M2M0QveeoHrbgu5i/PJlAWej6SdsMAq0s= Received: by 10.49.5.1 with SMTP id h1mr2271029nfi; Mon, 29 May 2006 22:45:15 -0700 (PDT) Received: by 10.49.10.13 with HTTP; Mon, 29 May 2006 22:45:15 -0700 (PDT) Message-ID: <59adc1a0605292245v4411ea20t@mail.gmail.com> Date: Tue, 30 May 2006 07:45:15 +0200 From: "Dimitar Vasilev" To: "GiL A. Virtucio" In-Reply-To: <016a01c68389$0a99fd20$5ac8a8c0@loui> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-5; format=flowed Content-Transfer-Encoding: base64 Content-Disposition: inline References: <016a01c68389$0a99fd20$5ac8a8c0@loui> Cc: questions@freebsd.org, Marwan Sultan Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 07:41:46 -0000 MjAwNi81LzMwLCBHaUwgQS4gVmlydHVjaW8gPGdpbEBhc29sLmNvbS5waD46Cj4gdG8gcmVzdHJp Y3QgdXNlcnMgZnJvbSBuYXZpZ2F0aW5nIG91dHNpZGUgdGhlaXIgaG9tZSBkaXJlY3RvcmllcyB0 aHJvdWdoIEZUUAo+IHRyeSB1c2luZyBhbiBGVFAgc2VydmVyIHRoYXQgc3VwcG9ydCBjaHJvb3Rp bmcuIHlvdSBtaWdodCB3YW50IHRvIGNoZWNrCj4gcHJvZnRwZC4gIGh0dHA6Ly93d3cucHJvZnRw ZC5vcmcvCj4gaXQgaXMgYWxzbyBpbmNsdWRlZCBpbiB0aGUgcG9ydHMgY29sbGVjdGlvbi4KPgo+ IGhvcGUgdGhpcyBoZWxwcyA6KQo+ClNlZSBhbHNvIG1hbiBmdHBjaHJvb3QgZm9yIHRoZSBCU0Qg ZnRwZCBhbmQgdGhlIHJlbGF0aXZlIGRvY3MgZm9yIHlvdXIKZnRwIGRhZW1vbi4KSSdtIG5vdCBz dXJlIGlmIGFjbCwgZXh0ZW5kZWQgYXR0cmlidXRlcyAgYW5kIE1BQyBleGlzdCBpbiA0LjgsIGJ1 dAp0aGVzZSBhcmUgYWxzbyAgb3B0aW9ucy4KCi0tIAq02NzY4urgILLQ4djb1dIKRGltaXRhciBW YXNzaWxldgoKR251UEcga2V5IElEOiAweDRCOERCNTI1CktleXNlcnZlcjogcGdwLm1pdC5lZHUK S2V5IGZpbmdlcnByaW50OiBEODhBIDNCOTIgREVENSA5MTdFIDM0MUUgRDYyRiA4QzUxIDVGQzQg NEI4RCBCNTI1Cg== From owner-freebsd-questions@FreeBSD.ORG Tue May 30 08:19:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F58F16A443 for ; Tue, 30 May 2006 08:19:50 +0000 (UTC) (envelope-from m.seaman@infracaninophile.co.uk) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.187.76.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3991A43D5D for ; Tue, 30 May 2006 08:19:44 +0000 (GMT) (envelope-from m.seaman@infracaninophile.co.uk) Received: from [172.16.3.238] (gateway.ash.thebunker.net [213.129.64.4]) (authenticated bits=0) by smtp.infracaninophile.co.uk (8.13.6/8.13.6) with ESMTP id k4U8JSNG059506 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Tue, 30 May 2006 09:19:29 +0100 (BST) (envelope-from m.seaman@infracaninophile.co.uk) Message-ID: <447C0010.6010509@infracaninophile.co.uk> Date: Tue, 30 May 2006 09:19:28 +0100 From: Matthew Seaman Organization: Infracaninophile User-Agent: Thunderbird 1.5.0.2 (X11/20060424) MIME-Version: 1.0 To: Imran Imtiaz References: <200605300608.k4U68BTh044492@darkstar.thelakecity.com.pk> In-Reply-To: <200605300608.k4U68BTh044492@darkstar.thelakecity.com.pk> X-Enigmail-Version: 0.94.0.0 Content-Type: multipart/signed; micalg=pgp-ripemd160; protocol="application/pgp-signature"; boundary="------------enig8A5C71BC1A4F6B7913B6D350" X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (smtp.infracaninophile.co.uk [81.187.76.162]); Tue, 30 May 2006 09:19:29 +0100 (BST) X-Virus-Scanned: ClamAV 0.88.2/1499/Mon May 29 21:35:17 2006 on happy-idiot-talk.infracaninophile.co.uk X-Virus-Status: Clean X-Spam-Status: No, score=-3.5 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on happy-idiot-talk.infracaninophile.co.uk Cc: freebsd-questions@freebsd.org Subject: Re: squid questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 08:19:50 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig8A5C71BC1A4F6B7913B6D350 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: quoted-printable Imran Imtiaz wrote: > I'm running squid on my freebsd but in the log most of the pages are > TCP_MISS is that fine aur I'll have to tune squid a bit more. Most of > the configurations are default. What do you mean by 'most'? A cache hit rate of 40% is not doing badly for a general purpose web proxy, but that number can vary a great deal depending on the particular traffic patterns you see. I'd advise you to set up cricket or cacti or mrtg to generate graphs of the statistics Squid generates for you -- using the built-in SNMP service= for that works pretty well. Looking at a graph gives you a much better idea of what is really happening than trying to intuit the results from reading a raw logfile. And pretty graphs keep managers amused and out of your hair for hours... Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. Flat 3 7 Priory Courtyard PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate Kent, CT11 9PW, UK --------------enig8A5C71BC1A4F6B7913B6D350 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEfAAQ8Mjk52CukIwRA1qTAJ9mqB7PmwPROki4JzlF00TBjWkWaQCgiPAS 7n07vP48YTlOv89sHZ0Dhis= =8GJL -----END PGP SIGNATURE----- --------------enig8A5C71BC1A4F6B7913B6D350-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 08:32:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 490B916A422 for ; Tue, 30 May 2006 08:32:49 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id E02D243D48 for ; Tue, 30 May 2006 08:32:48 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fkzeg-0007dT-9u; Tue, 30 May 2006 04:32:46 -0400 Message-ID: <447C0328.6050001@webanoide.org> Date: Tue, 30 May 2006 18:32:40 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: sara lidgey References: <20060529233450.15677.qmail@web35707.mail.mud.yahoo.com> In-Reply-To: <20060529233450.15677.qmail@web35707.mail.mud.yahoo.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: freebsd 5.3, gmirror raid 1, PROBLEM X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 08:32:50 -0000 sara lidgey wrote: > Hi All, > > I've been running a server using FreeBSD 5.3 and gmirror to mirror two identical IDE hard drives. Its been running great for over a year. But recently everything went down and when I reboot and put a monitor on it I get the following errors on screen: > > GEOM_MIRROR: Device gm0: provider ad1 disconnected > GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed > GEOM_MIRROR: Device gm0: rebuilding provider ad0 stopped > > Fatal trap 12: page fault while in kernel mode... (this is followed by details about the fault) > > These errors are preceded by other related error information that flys by on the screen and I have no way of seeing them again. > > Does anyone now what steps I should take to figure what is going on and try to recover data or get the machine to boot? > Hi, Have you tried disconnecting ad1 and booting only with ad0? Maybe one of the drives just died on you. Try booting the system with one drive at a time connecting as a master (Primary on IDE1). Let us know how it goes. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Tue May 30 08:49:07 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9571316A64F for ; Tue, 30 May 2006 08:49:07 +0000 (UTC) (envelope-from xi@borderworlds.dk) Received: from ferengi.borderworlds.dk (ferengi.borderworlds.dk [80.166.152.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0E34443D4C for ; Tue, 30 May 2006 08:49:06 +0000 (GMT) (envelope-from xi@borderworlds.dk) Received: from borg.borderworlds.dk (localhost [127.0.0.1]) by ferengi.borderworlds.dk (Postfix) with ESMTP id C04E1B80B for ; Tue, 30 May 2006 10:49:04 +0200 (CEST) Received: by borg.borderworlds.dk (Postfix, from userid 1001) id 8AB0EB911; Tue, 30 May 2006 10:49:04 +0200 (CEST) To: freebsd-questions@freebsd.org References: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> From: Christian Laursen Date: Tue, 30 May 2006 10:49:04 +0200 In-Reply-To: (Nikolas Britton's message of "Mon, 29 May 2006 18:38:54 -0500") Message-ID: <868xoj99tr.fsf@borg.borderworlds.dk> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Re: grub on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 08:49:12 -0000 "Nikolas Britton" writes: > IIRC grub can't see UFS2, only UFS. I belive there is a work around > though. google for it GRUB has been able to read UFS2 filesystems for a long time. That doesn't help Ask with his particular problem though. -- Christian Laursen From owner-freebsd-questions@FreeBSD.ORG Tue May 30 08:56:09 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0EE5016A6CE for ; Tue, 30 May 2006 08:56:09 +0000 (UTC) (envelope-from dead_line@hotmail.com) Received: from hotmail.com (bay20-f5.bay20.hotmail.com [64.4.54.94]) by mx1.FreeBSD.org (Postfix) with ESMTP id C3F9C43D48 for ; Tue, 30 May 2006 08:56:08 +0000 (GMT) (envelope-from dead_line@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 30 May 2006 01:56:08 -0700 Message-ID: Received: from 62.150.131.187 by by20fd.bay20.hotmail.msn.com with HTTP; Tue, 30 May 2006 08:56:06 GMT X-Originating-IP: [62.150.131.187] X-Originating-Email: [dead_line@hotmail.com] X-Sender: dead_line@hotmail.com In-Reply-To: <016a01c68389$0a99fd20$5ac8a8c0@loui> From: "Marwan Sultan" To: gil@asol.com.ph Date: Tue, 30 May 2006 08:56:06 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed X-OriginalArrivalTime: 30 May 2006 08:56:08.0484 (UTC) FILETIME=[E45F1E40:01C683C6] Cc: freebsd@amadeus.demon.nl, questions@freebsd.org, dimitar.vassilev@gmail.com Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 08:56:18 -0000 Hello, Yes, I understand that To lockup a user from navigating outside their home directories through ftp, I simply can add them to /etc/ftpchroot and when a user connects It wont allow him to go any level higher than his Home Directory. No need for proftpd as additional port, because the base system will do it throu /etc/ftpchroot BUT!! The user can connect through SSH and navigate, Here where my information stops, 2 questions, 1) How do I have a list from few users to disallow them using SSH? is there any where i add a user to disallow him from using SSH? 2) If I want to lock the user through his SSH session not FTP session whats the way? Is jail the only way? no easier way? chroot can do it? how if yes? or whats the alternatives? Thank you guys for following up with me. Marwan > >to restrict users from navigating outside their home directories through >FTP try using an FTP server that support chrooting. you might want to check >proftpd. http://www.proftpd.org/ >it is also included in the ports collection. > >hope this helps :) > > >================================= >Gil A. Virtucio >Janitor/Kolektor/Messenger/Driver >Asia Solution Phillippines Inc. >28/F Antel Global Corporate Center >3 Doña Julia Vargas Avenue, >Ortigas Center, Pasig >Office # : +63-2-687-0692 loc. 103 >Mobile # : +63-916-3989695 >http://www.gihl.eu.org/ >================================= >----- Original Message ----- From: "Marwan Sultan" >To: >Sent: Tuesday, May 30, 2006 5:15 AM >Subject: User Access restriction. > > >>Hello Everyone, >> >> I have a server Up and running, 4.8-R, (well why 4.8? its up since >>years) >> However, this server is for commercial use, recently, we started Home >>pages hosting, >> which requier me to give the user access to the shell, >> >> Well, the question, >> >> Lets say, I have 2 groups, Group1, Group2 >> under Groupe1 is the webpages shell accounts (user accounts) >> and group2, just shell users, >> >> If user1 from Group1 will ftp or ssh to the box, his default home path >>will be >> /home/group1/user1 >>But, he still can navigate thro his FTP or ssh to see the directories and >>read files of group1 or >>group2, and play around lilbit, >> >>PLEASE how to restrict this user from going outside his shell account and >>restrict him from >>viewing others folders and webpages ? If i will chmod to something >>limited, then even when >>he browse the web to his webpage it wont work, >> >>So how to have the restriction in the same time viewing his web thro any >>browser worldwide? >> >>Sorry for the long email. >> >>Thank you, >>Marwan >> >>_________________________________________________________________ >>Express yourself instantly with MSN Messenger! Download today it's FREE! >>http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to >>"freebsd-questions-unsubscribe@freebsd.org" >> > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to >"freebsd-questions-unsubscribe@freebsd.org" _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ From owner-freebsd-questions@FreeBSD.ORG Tue May 30 09:03:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E9E4B16A421 for ; Tue, 30 May 2006 09:03:59 +0000 (UTC) (envelope-from igorr@speechpro.com) Received: from speechpro.ru (speech-tech-2.ip.PeterStar.net [81.3.190.130]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7224243D58 for ; Tue, 30 May 2006 09:03:59 +0000 (GMT) (envelope-from igorr@speechpro.com) Received: from [192.168.2.26] (helo=sysadm.stc) by s1.stc with esmtp (Exim 4.53 (FreeBSD)) id 1Fl08r-000403-PT for freebsd-questions@freebsd.org; Tue, 30 May 2006 13:03:57 +0400 Received: from localhost.stc ([127.0.0.1] helo=sysadm.stc) by sysadm.stc with esmtp (Exim 4.62 (FreeBSD)) (envelope-from ) id 1Fl09h-000HBF-0q for freebsd-questions@freebsd.org; Tue, 30 May 2006 13:04:49 +0400 Received: (from igorr@localhost) by sysadm.stc (8.13.6/8.13.6/Submit) id k4U94mGg066044 for freebsd-questions@freebsd.org; Tue, 30 May 2006 13:04:48 +0400 (MSD) (envelope-from igorr) Date: Tue, 30 May 2006 13:04:48 +0400 From: Igor Robul To: freebsd-questions@freebsd.org Message-ID: <20060530090448.GN65297@sysadm.stc> References: <20060525145312.50581.qmail@web53406.mail.yahoo.com> <20060529092932.GB61608@sysadm.stc> <447AC73A.8040306@u.washington.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <447AC73A.8040306@u.washington.edu> User-Agent: Mutt/1.5.11 X-Archived: Yes Subject: Re: Spam problem! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 09:04:01 -0000 On Mon, May 29, 2006 at 03:04:42AM -0700, Garrett Cooper wrote: > SMTP with SSL/TLS and authentication for a network works wonders.. I'm not talking about _my_ users sending mail, I'm talking about mail _to_ my users :-) From owner-freebsd-questions@FreeBSD.ORG Tue May 30 09:28:20 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F2C7716A661 for ; Tue, 30 May 2006 09:28:19 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4CA8843D58 for ; Tue, 30 May 2006 09:28:12 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fl0WF-0005pG-8q; Tue, 30 May 2006 05:28:07 -0400 Message-ID: <447C1021.1070209@webanoide.org> Date: Tue, 30 May 2006 19:28:01 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: Marwan Sultan References: In-Reply-To: X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd@amadeus.demon.nl, questions@freebsd.org, dimitar.vassilev@gmail.com, gil@asol.com.ph Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 09:28:22 -0000 Marwan Sultan wrote: > Hello, > > Yes, I understand that To lockup a user from navigating outside their > home directories through > ftp, I simply can add them to /etc/ftpchroot and when a user connects > It wont allow him > to go any level higher than his Home Directory. > No need for proftpd as additional port, because the base system will do > it throu /etc/ftpchroot > > BUT!! > The user can connect through SSH and navigate, > Here where my information stops, > 2 questions, > 1) How do I have a list from few users to disallow them using SSH? > is there any where i add a user to disallow him from using SSH? man sshd_config and see AllowUsers/DenyUsers sections. > > 2) If I want to lock the user through his SSH session not FTP session > whats the way? > Is jail the only way? no easier way? chroot can do it? how if yes? or > whats the alternatives? > > Thank you guys for following up with me. > > Marwan Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Tue May 30 09:43:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DFEBE16A525 for ; Tue, 30 May 2006 09:43:24 +0000 (UTC) (envelope-from freebsd-listen@fabiankeil.de) Received: from smtprelay01.ispgateway.de (smtprelay01.ispgateway.de [80.67.18.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2941143D5C for ; Tue, 30 May 2006 09:43:22 +0000 (GMT) (envelope-from freebsd-listen@fabiankeil.de) Received: (qmail 22092 invoked from network); 30 May 2006 09:43:21 -0000 Received: from unknown (HELO localhost) ([pbs]775067@[217.50.148.195]) (envelope-sender ) by smtprelay01.ispgateway.de (qmail-ldap-1.03) with SMTP for ; 30 May 2006 09:43:21 -0000 Date: Tue, 30 May 2006 11:43:14 +0200 From: Fabian Keil To: Lorin Lund Message-ID: <20060530114314.286c1dd4@localhost> In-Reply-To: <447B67BD.8070905@infowest.com> References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <447B67BD.8070905@infowest.com> X-Mailer: Sylpheed-Claws 2.1.1 (GTK+ 2.8.17; i386-portbld-freebsd6.1) X-PGP-KEY-URL: http://www.fabiankeil.de/gpg-keys/freebsd-listen-2006-08-19.asc User-Agent: 321 test Mime-Version: 1.0 Content-Type: multipart/signed; boundary=Sig_KoVE9g22wWWBcnb.xjcuTwZ; protocol="application/pgp-signature"; micalg=PGP-SHA1 Cc: freebsd-questions@freebsd.org Subject: Re: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 09:43:26 -0000 --Sig_KoVE9g22wWWBcnb.xjcuTwZ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Lorin Lund wrote: > I'm running 6.1-RELEASE i386. Generic kernel. > The wireless 'card' is a built-in Broadcom 802.11 b/g > My PC is a Compaq V2607CL Turion based notebook >=20 > I downloaded a driver kit from HP. It created > c:\SWSetup\SP32158A\ > In that folder I found > bcmwl5.inf > bcmwl5.sys > bcmwl5npf.sys > and lots of other files. >=20 > The .INF file was UNICODE. But as far as I can tell the only > special characters were in the > [strings] > section for various countries. I cut off all the other countries=20 > leaving just US and > forced it to ASCII.=20 >=20 > ndiscvt gave no error messages. >=20 > The > make > make install > gave no error messages. >=20 > I added an ndis linen to loader.conf to load the .ko >=20 > dmesg shows no error messages. But it doesn't show ndis0: being=20 > recognized either. >=20 > When I manually try > kldload ndis > it says it is already loaded. >=20 > When I try > ifconfig -a > there is no ndis: > When I try > ifconfig ndis0: > it says there is no interface. >=20 > I don't know what else to try. ndisgen(8) Fabian --=20 http://www.fabiankeil.de/ --Sig_KoVE9g22wWWBcnb.xjcuTwZ Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfBO2jV8GA4rMKUQRAnG8AJwIFSUEY4UA9LnNvRudKqYhJ1wYHwCgtpCw DC9fLQnNmGV1eKrQuDEn0eI= =T1Lx -----END PGP SIGNATURE----- --Sig_KoVE9g22wWWBcnb.xjcuTwZ-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 09:49:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8DA3016A51B for ; Tue, 30 May 2006 09:49:33 +0000 (UTC) (envelope-from beech@alaskaparadise.com) Received: from stargate.alaskaparadise.com (114-103-74-65.gci.net [65.74.103.114]) by mx1.FreeBSD.org (Postfix) with ESMTP id ED66443D48 for ; Tue, 30 May 2006 09:49:25 +0000 (GMT) (envelope-from beech@alaskaparadise.com) Received: by stargate.alaskaparadise.com (Postfix, from userid 0) id 69B334066; Tue, 30 May 2006 01:49:02 -0800 (AKDT) From: Beech Rintoul Organization: Alaska Paradise To: freebsd-questions@freebsd.org User-Agent: KMail/1.9.1 References: <447C1021.1070209@webanoide.org> In-Reply-To: <447C1021.1070209@webanoide.org> MIME-Version: 1.0 Date: Tue, 30 May 2006 01:48:42 -0800 Content-Type: multipart/signed; boundary="nextPart1448432.rIM0hVdrV5"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200605300149.00925.beech@alaskaparadise.com> Cc: Marwan Sultan Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 09:49:35 -0000 --nextPart1448432.rIM0hVdrV5 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Tuesday 30 May 2006 01:28, Mikhail Goriachev wrote: > Marwan Sultan wrote: > > Hello, > > > > Yes, I understand that To lockup a user from navigating outside their > > home directories through > > ftp, I simply can add them to /etc/ftpchroot and when a user connects > > It wont allow him > > to go any level higher than his Home Directory. > > No need for proftpd as additional port, because the base system will do > > it throu /etc/ftpchroot > > > > BUT!! > > The user can connect through SSH and navigate, > > Here where my information stops, > > 2 questions, > > 1) How do I have a list from few users to disallow them using SSH? > > is there any where i add a user to disallow him from using SSH? You can define /usr/sbin/nologin as their shell, that will prevent all shel= l=20 logins for that user. But AFIK the stock ftp will not work without shell=20 access. You will need to use something like proftpd if you go that route. Beech > > man sshd_config > > and see AllowUsers/DenyUsers sections. > > > 2) If I want to lock the user through his SSH session not FTP session > > whats the way? > > Is jail the only way? no easier way? chroot can do it? how if yes? or > > whats the alternatives? > > > > Thank you guys for following up with me. > > > > Marwan > > Cheers, > Mikhail. =2D-=20 =2D------------------------------------------------------------------------= =2D------------- Beech Rintoul - Sys. Administrator - beech@alaskaparadise.com /"\ ASCII Ribbon Campaign | Alaska Paradise \ / - NO HTML/RTF in e-mail | 201 East 9Th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ - Please visit Alaska Paradise - http://www.alaskaparadise.com =2D------------------------------------------------------------------------= =2D------------- --nextPart1448432.rIM0hVdrV5 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEfBUMp5D0B1NlT4URAqlSAJ9V6OZkd7rgz1bHyBmvh7ZVAnr+EQCfRGGt /jyK7BE/6X1sM/a35EOXXDw= =GcVM -----END PGP SIGNATURE----- --nextPart1448432.rIM0hVdrV5-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 11:36:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F6E216A421 for ; Tue, 30 May 2006 11:36:40 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.172]) by mx1.FreeBSD.org (Postfix) with ESMTP id 397C043D46 for ; Tue, 30 May 2006 11:36:38 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so468683uge for ; Tue, 30 May 2006 04:36:38 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=WJbcSQiOTVKDMve/vXWuzjMYlmgiu4esQRwUBdSNINVn4BFT8/gA3dPdfiPyQOAa7b8QkrBUEt166UehQ8oXyYLdWqfzyzhQhX/3FBKwR02srNhxl72dWGkR8wIUiBjuw5fNIkDvZi9L5Cwud2SgWiECMIle+UaICbx0I+VNjRg= Received: by 10.78.32.16 with SMTP id f16mr575275huf; Tue, 30 May 2006 04:29:36 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Tue, 30 May 2006 04:29:36 -0700 (PDT) Message-ID: <18e02bd30605300429r67f96dceyb4716205d730620d@mail.gmail.com> Date: Tue, 30 May 2006 14:29:36 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <20060530095344.2e8db744@localhost> MIME-Version: 1.0 References: <18e02bd30605290443p36f3859bt1359ca75d1c896ce@mail.gmail.com> <20060529231524.0f76b3ba@localhost> <18e02bd30605290931i6fb55892h634b55201b50d60f@mail.gmail.com> <20060530095344.2e8db744@localhost> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: geli resilience to power outages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 11:36:40 -0000 On 5/30/06, Norberto Meijome wrote: > > On Mon, 29 May 2006 16:31:38 +0000 > "Iantcho Vassilev" wrote: > > > On 5/29/06, Norberto Meijome wrote: > > > > > > On Mon, 29 May 2006 14:43:46 +0300 > > > "Iantcho Vassilev" wrote: > > > > > > > DO someone know if and how GELI is resilience to power outages? > > > > > > > > Does the box is still encrypted? After reboot what would happen to > fcsk? > > > > > > Hi Iantcho , > > > I dont know for a fact the effect with a power outage, but I use it > quite > > > a lot > > > on laptops (which a) freeze sometimes out of nowhere , and b) > sometimes > > > dont > > > resume properly,). In both situations, I've usually had geli mounted > > > disks (1 > > > x 6 GB, 1 x 500 MB) running when the events happened. ( as well as a 4 > GB > > > swap > > > which is also GELI backed) > > > > > > They (touch wood) haven't suffered data loss. /usr and /var seem be > more > > > affected by this ungraceful shutdowns than the .eli devices. > > > > > > I suppose it's all cool thanks to soft-updates, and the fact that GELI > > > encrypts > > > on a per block basis (yeah, no more pgp-busted disks like in Windows > :) ). > > > > > > good luck, > > > Beto > > > > > > Thanks for the input,Beto.. > > > > As i didn`t read the GELI "workbook" > definitely read man geli , man geom_geli, and the handbook section...and > play > with it until you feel comfortable with it. > > > can you tell be can i convert existing > > partition in GELI or i should repartition? > > depends what you want to do. If you want to create a file-backed GELI > encrypted > file (similar to a PGP Disk in Windows), then you dont need to touch your > partitions at all - simply create the file. > > If you want to have, for example, /usr encrypted, then you need, > /dev/ad0s1f.eli > instead of . /dev/ad0s1f - you dont believe you need to repartition, but > you'll > need to wipe all the data and to encrypt the device. > > Read the docs. > Beto > Thank you,Beto.. I will have a look into the documents. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 12:29:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A1C7916A6A3 for ; Tue, 30 May 2006 12:29:27 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1A5F743D55 for ; Tue, 30 May 2006 12:29:26 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4UCTN1q031759; Tue, 30 May 2006 07:29:24 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447C3A9D.2030908@daleco.biz> Date: Tue, 30 May 2006 07:29:17 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Malcolm Fitzgerald References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: "freebsd-questions@FreeBSD. ORG" Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 12:29:38 -0000 Malcolm Fitzgerald wrote: > >> Malcolm Fitzgerald wrote: > > > Running that command returns this: > > ifconfig: -inet: bad value > Bah! I'm on the road too much lately. No "dash" before "inet" ... KDK -- At social gatherings, I would amuse everyone by standing uponst the coffee table and striking meself repeatedly upon the head with a brick. -- H. R. Gumby From owner-freebsd-questions@FreeBSD.ORG Tue May 30 11:04:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C9AF16A41F for ; Tue, 30 May 2006 11:04:24 +0000 (UTC) (envelope-from ss650120@ms10.hinet.net) Received: from smtp2.cc.ncu.edu.tw (smtp2.cc.ncu.edu.tw [140.115.17.128]) by mx1.FreeBSD.org (Postfix) with ESMTP id B670043D46 for ; Tue, 30 May 2006 11:04:23 +0000 (GMT) (envelope-from ss650120@ms10.hinet.net) Received: from yatung (ds200.net.ncu.edu.tw [140.115.10.200]) by smtp2.cc.ncu.edu.tw (8.12.9/8.12.9/dove/0.0.4) with SMTP id k4UB4H0I025416; Tue, 30 May 2006 19:04:18 +0800 (CST) Message-ID: <000c01c683d8$ca03a950$c80a738c@yatung> From: =?big5?B?uLOm9sBz?= To: Cc: Date: Tue, 30 May 2006 19:04:13 +0800 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-osmtp-MailScanner-Information: Please contact the ISP for more information X-osmtp-MailScanner: Found to be clean X-Mailman-Approved-At: Tue, 30 May 2006 12:37:54 +0000 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: I have some questions about natd and firewall....^_^||| X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 11:04:24 -0000 Hello: My English is not good. I am sorry about this first. ~_~ My system: FreeBSD + IPFW + NAT Question 1: about NAT (in FreeBSD) I built a "natd.conf" and it's contents are below: redirect_address 192.168.0.1 140.115.10.22 I have 2 computers in the LAN: 192.168.0.200 and 192.168.0.201. The redirect rule (above) will affect any connection which destination is 140.115.10.22. But, I don't want this rule to redirect the packets sent from 192.168.0.200.(ie. This rule will affect all nodes inside the LAN but 192.168.0.200) Can I make it? Question 2: about Firewall (in FreeBSD) Is there any argument in IPFW just like the function of the "redirect_address" in NAT can be used? If it is, I think it may can solve the above problem. I hope I can get your reply. Deeply appreciate ^_^ ~felix From owner-freebsd-questions@FreeBSD.ORG Tue May 30 12:54:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 24E0F16A7F7 for ; Tue, 30 May 2006 12:54:06 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0CA3B43D5D for ; Tue, 30 May 2006 12:54:04 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 30192 invoked by uid 507); 30 May 2006 22:54:03 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 30 May 2006 22:54:03 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <447C3A9D.2030908@daleco.biz> References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> <447C3A9D.2030908@daleco.biz> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Tue, 30 May 2006 22:54:02 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 12:54:15 -0000 On 30/05/2006, at 10:29 PM, Kevin Kinsey wrote: > Malcolm Fitzgerald wrote: >>> Malcolm Fitzgerald wrote: >> Running that command returns this: >> ifconfig: -inet: bad value > > > Bah! I'm on the road too much lately. No "dash" > before "inet" ... here's the output bsd-box# ifconfig lo0 inet 127.0.0.1 netmask 255.255.255.0 bsd-box# ifconfig -a rl0: flags=8843 mtu 1500 options=8 inet6 fe80::2e0:4cff:fe08:e02a%rl0 prefixlen 64 scopeid 0x1 inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:e0:4c:08:e0:2a media: Ethernet autoselect (100baseTX ) status: active plip0: flags=108810 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xffffff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 bsd-box# apachectl graceful httpd not running, trying to start bsd-box# tail -f /var/log/httpd-error.log [Tue May 30 22:33:13 2006] [alert] (EAI 8)hostname nor servname provided, or not known: mod_unique_id: unable to find IPv4 address of "bsd-box." Configuration Failed [Tue May 30 22:43:26 2006] [info] Init: Seeding PRNG with 136 bytes of entropy [Tue May 30 22:43:26 2006] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Tue May 30 22:43:26 2006] [info] Init: Generating temporary DH parameters (512/1024 bits) [Tue May 30 22:43:26 2006] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Tue May 30 22:43:26 2006] [info] Init: Initializing (virtual) servers for SSL [Tue May 30 22:43:26 2006] [info] Server: Apache/2.2.2, Interface:mod_ssl/2.2.2, Library: OpenSSL/0.9.7e-p1 [Tue May 30 22:43:51 2006] [alert] (EAI 8)hostname nor servname provided, or not known: mod_unique_id: unable to find IPv4 address of "bsd-box." Configuration Failed From owner-freebsd-questions@FreeBSD.ORG Tue May 30 13:28:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C2A1416A486 for ; Tue, 30 May 2006 13:28:02 +0000 (UTC) (envelope-from david@landgren.net) Received: from sferics.mongueurs.net (sferics.mongueurs.net [81.80.147.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1C56043D53 for ; Tue, 30 May 2006 13:28:02 +0000 (GMT) (envelope-from david@landgren.net) Received: from [127.0.0.1] (exo.bpinet.com [81.80.147.206]) by sferics.mongueurs.net (Postfix) with ESMTP id 62CA9AC6E for ; Tue, 30 May 2006 15:28:01 +0200 (CEST) Message-ID: <447C4860.3090900@landgren.net> Date: Tue, 30 May 2006 15:28:00 +0200 From: David Landgren Organization: The Lusty Decadent Delights of Imperial Pompeii User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Apache not building its own modules (e.g. mod_alias) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 13:28:03 -0000 Hello list, I wasn't exactly thinking things out, and just posted the following message to freebsd-ports, whereas it's probably better here. More eyeballs in any case. So sorry if you're seeing this for the second time. I'm having great difficulty tracking what's going wrong here. I'm trying to build Apache 2.0 with the following: cd /usr/ports/www/apache20 make PREFIX=/home/apache20 \ APR_UTIL_WITH_BERKELEY_DB=yes \ APR_UTIL_WITH_LDAP=yes \ WITH_MODULES="access alias auth auth_ldap headers info ldap mime proxy proxy_connect proxy_http rewrite status ssl" \ WITH_STATIC_MODULES="access alias auth auth_ldap headers info ldap mime proxy proxy_connect proxy_http rewrite status ssl" \ At the end of this, I get # sbin/httpd -l Compiled in modules: core.c mod_auth.c prefork.c http_core.c mod_mime.c mod_status.c mod_info.c mod_rewrite.c mod_so.c And no mod_*.so files created either. I can build some modules dynamically. For instance mod_access can, and I get a libexec/apache2/mod_access.so at the end. But some things just don't get built no matter what I try, such as mod_alias. The lack if mod_alias, for instance, causes Redirect to go unrecognized in the config file, and so on. I must be doing something wrong; any clues gratefully received. update: what I do see, grovelling around in the work/ directory is that mod_alias and a number of other modules appear to be explicitly disabled in configure.log and never enabled, although make show-modules show that it has been specified as enabled. For instance: (apache.port is just a wrapper around the above cd and make) ~/apache.port show-modules | grep enabled | sort -u access: enabled (static) alias: enabled (static) auth: enabled (static) auth_ldap: enabled (static) headers: enabled (static) info: enabled (static) ldap: enabled (static) mime: enabled (static) proxy: enabled (static) proxy_connect: enabled (static) proxy_http: enabled (static) rewrite: enabled (static) ssl: enabled (static) status: enabled (static) Thanks, David -- Much of the propaganda that passes for news in our own society is given to immobilising and pacifying people and diverting them from the idea that they can confront power -- John Pilger From owner-freebsd-questions@FreeBSD.ORG Tue May 30 13:28:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 244B516A4D0 for ; Tue, 30 May 2006 13:28:22 +0000 (UTC) (envelope-from slidgey@yahoo.ca) Received: from web35703.mail.mud.yahoo.com (web35703.mail.mud.yahoo.com [66.163.179.157]) by mx1.FreeBSD.org (Postfix) with SMTP id 14B4143D4C for ; Tue, 30 May 2006 13:28:20 +0000 (GMT) (envelope-from slidgey@yahoo.ca) Received: (qmail 35305 invoked by uid 60001); 30 May 2006 13:28:20 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.ca; h=Message-ID:Received:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=ZS25rqLR5wVV49NHu9xcsOljgiHUpjZ1ZBDHsYcQOyNze6mPSRskDLGszVT5ZHz/1Inxbh/IVVf5ymZWohl9wwC2BF+uBDti2TWt9IXjouKFiPedlLIBpSiD5+cs/fGvbqkSWA563vbU/OGBY8YQEOjwqSv9Nsxg05CY8wLtWlM= ; Message-ID: <20060530132820.35303.qmail@web35703.mail.mud.yahoo.com> Received: from [24.222.189.156] by web35703.mail.mud.yahoo.com via HTTP; Tue, 30 May 2006 09:28:20 EDT Date: Tue, 30 May 2006 09:28:20 -0400 (EDT) From: sara lidgey To: Mikhail Goriachev In-Reply-To: <447C0328.6050001@webanoide.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: freebsd 5.3, gmirror raid 1, PROBLEM X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 13:28:23 -0000 Hi, The machine won't boot from either drive connected as a master. I tried them one at a time. I'm guessing I'll have to boot from a CD but don't know the process. Any help is appreciated. Thanks, S. Mikhail Goriachev wrote: sara lidgey wrote: > Hi All, > > I've been running a server using FreeBSD 5.3 and gmirror to mirror two identical IDE hard drives. Its been running great for over a year. But recently everything went down and when I reboot and put a monitor on it I get the following errors on screen: > > GEOM_MIRROR: Device gm0: provider ad1 disconnected > GEOM_MIRROR: Device gm0: provider mirror/gm0 destroyed > GEOM_MIRROR: Device gm0: rebuilding provider ad0 stopped > > Fatal trap 12: page fault while in kernel mode... (this is followed by details about the fault) > > These errors are preceded by other related error information that flys by on the screen and I have no way of seeing them again. > > Does anyone now what steps I should take to figure what is going on and try to recover data or get the machine to boot? > Hi, Have you tried disconnecting ad1 and booting only with ad0? Maybe one of the drives just died on you. Try booting the system with one drive at a time connecting as a master (Primary on IDE1). Let us know how it goes. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B --------------------------------- The best gets better. See why everyone is raving about the All-new Yahoo! Mail. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 13:53:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4439A16A685 for ; Tue, 30 May 2006 13:53:50 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id C849043D53 for ; Tue, 30 May 2006 13:53:49 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k4UDqneL003757; Tue, 30 May 2006 09:52:49 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k4UDqlcg003756; Tue, 30 May 2006 09:52:47 -0400 (EDT) From: Jerry McAllister Message-Id: <200605301352.k4UDqlcg003756@clunix.cl.msu.edu> To: beech@alaskaparadise.com (Beech Rintoul) Date: Tue, 30 May 2006 09:52:47 -0400 (EDT) In-Reply-To: <200605300149.00925.beech@alaskaparadise.com> X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org, Marwan Sultan Subject: Re: User Access restriction. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 13:54:38 -0000 > > On Tuesday 30 May 2006 01:28, Mikhail Goriachev wrote: > > Marwan Sultan wrote: > > > Hello, > > > > > > Yes, I understand that To lockup a user from navigating outside their > > > home directories through > > > ftp, I simply can add them to /etc/ftpchroot and when a user connects > > > It wont allow him > > > to go any level higher than his Home Directory. > > > No need for proftpd as additional port, because the base system will do > > > it throu /etc/ftpchroot > > > > > > BUT!! > > > The user can connect through SSH and navigate, > > > Here where my information stops, > > > 2 questions, > > > 1) How do I have a list from few users to disallow them using SSH? > > > is there any where i add a user to disallow him from using SSH? > > You can define /usr/sbin/nologin as their shell, that will prevent all shel= > l=20 > logins for that user. But AFIK the stock ftp will not work without shell=20 > access. You will need to use something like proftpd if you go that route. It has been a long time since I played with it (years) but I think exactly what you suggest here will work as the poster wants. Of course, nologin or its equivalent needs to be listed in /etc/shells. ////jerry > > Beech > > > > man sshd_config > > > > and see AllowUsers/DenyUsers sections. > > > > > 2) If I want to lock the user through his SSH session not FTP session > > > whats the way? > > > Is jail the only way? no easier way? chroot can do it? how if yes? or > > > whats the alternatives? > > > > > > Thank you guys for following up with me. > > > > > > Marwan > > > > Cheers, > > Mikhail. > > =2D-=20 > > =2D------------------------------------------------------------------------= > =2D------------- > Beech Rintoul - Sys. Administrator - beech@alaskaparadise.com > /"\ ASCII Ribbon Campaign | Alaska Paradise > \ / - NO HTML/RTF in e-mail | 201 East 9Th Avenue Ste.310 > X - NO Word docs in e-mail | Anchorage, AK 99501 > / \ - Please visit Alaska Paradise - http://www.alaskaparadise.com > =2D------------------------------------------------------------------------= > =2D------------- > > > > > > > > > > > > > --nextPart1448432.rIM0hVdrV5 > Content-Type: application/pgp-signature > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.3 (FreeBSD) > > iD8DBQBEfBUMp5D0B1NlT4URAqlSAJ9V6OZkd7rgz1bHyBmvh7ZVAnr+EQCfRGGt > /jyK7BE/6X1sM/a35EOXXDw= > =GcVM > -----END PGP SIGNATURE----- > > --nextPart1448432.rIM0hVdrV5-- > From owner-freebsd-questions@FreeBSD.ORG Tue May 30 14:11:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CD9F716A45D for ; Tue, 30 May 2006 14:11:33 +0000 (UTC) (envelope-from katarzyna.piotrowska@lpmagazine.org) Received: from poczta.software.com.pl (host-ip82-243.crowley.pl [62.111.243.82]) by mx1.FreeBSD.org (Postfix) with SMTP id 9076643D69 for ; Tue, 30 May 2006 14:11:23 +0000 (GMT) (envelope-from katarzyna.piotrowska@lpmagazine.org) Received: (qmail 15556 invoked from network); 30 May 2006 14:18:38 -0000 Received: by simscan 1.1.0 ppid: 15552, pid: 15553, t: 0.2299s scanners:none Received: from unknown (HELO ?10.10.10.106?) (10.10.10.106) by poczta.software.com.pl with SMTP; 30 May 2006 14:18:37 -0000 From: Katarzyna Piotrowska To: freebsd-questions@freebsd.org Date: Tue, 30 May 2006 16:15:02 +0200 User-Agent: KMail/1.8.2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200605301615.02365.katarzyna.piotrowska@lpmagazine.org> X-Spam-Checker-Version: SpamAssassin 3.0.4 (2005-06-05) on poczta.software.com.pl X-Spam-Level: X-Spam-Status: No, score=-2.8 required=4.0 tests=ALL_TRUSTED autolearn=disabled version=3.0.4 Subject: proposition cooperation with Software X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 14:11:45 -0000 Hello, Since we do not know each other yet, I would like to briefly introduce the company Software Wydawnictwo, a Polish publishing house specialising in IT magazines. Our magazines are printed in 7 language versions and are distributed in Western Europe as well as in many overseas countries. I'm writing to you because we decided to publish and distribute quarterly magazine concerning the main operating systems in French language version. The first one will be intended for FreeBSD users and about it. It will be published in July and available on French market (B&N). And also= on US market (B&N). It will be the 5th edition in French version. I'm also collecting the commercial software for this issue. I would like to propose you a cooperation. Maybe, you would prepare the special version of your products for the covermount DVDs. I can propose you the campaign publicity in our magazine or in the website www.lpmagazine.org/fr Please feel free to contact me, if you have any questions. I look forward to hearing from you Best regards Katarzyna =2D- Katarzyna Piotrowska www.lpmagazine.org/fr Linux+DVD magazine Software-Wydawnictwo Sp.z.o.o Piaskowa 3, 01-067 Warsaw, Poland Phone: +4822 8871344 =46ax: =A0 +4822 887 10 11 From owner-freebsd-questions@FreeBSD.ORG Tue May 30 14:27:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C02216A430 for ; Tue, 30 May 2006 14:27:15 +0000 (UTC) (envelope-from david@landgren.net) Received: from sferics.mongueurs.net (sferics.mongueurs.net [81.80.147.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id C506443D4C for ; Tue, 30 May 2006 14:27:14 +0000 (GMT) (envelope-from david@landgren.net) Received: from [127.0.0.1] (exo.bpinet.com [81.80.147.206]) by sferics.mongueurs.net (Postfix) with ESMTP id C24C3AC5D for ; Tue, 30 May 2006 16:27:13 +0200 (CEST) Message-ID: <447C5641.2060807@landgren.net> Date: Tue, 30 May 2006 16:27:13 +0200 From: David Landgren Organization: The Lusty Decadent Delights of Imperial Pompeii User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <447C4860.3090900@landgren.net> In-Reply-To: <447C4860.3090900@landgren.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Apache not building its own modules (e.g. mod_alias) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 14:27:19 -0000 David Landgren wrote: > Hello list, > > I wasn't exactly thinking things out, and just posted the following > message to freebsd-ports, whereas it's probably better here. More > eyeballs in any case. So sorry if you're seeing this for the second time. > > I'm having great difficulty tracking what's going wrong here. I'm trying > to build Apache 2.0 with the following: > > cd /usr/ports/www/apache20 > make PREFIX=/home/apache20 \ > APR_UTIL_WITH_BERKELEY_DB=yes \ > APR_UTIL_WITH_LDAP=yes \ > WITH_MODULES="access alias auth auth_ldap headers info ldap mime proxy > proxy_connect proxy_http rewrite status ssl" \ > WITH_STATIC_MODULES="access alias auth auth_ldap headers info ldap mime > proxy proxy_connect proxy_http rewrite status ssl" \ arg, scratch all that. I got stung by not realising that /etc/make.conf takes precedence over what appears on the command line. Which seems backwards, but there you are. David -- Much of the propaganda that passes for news in our own society is given to immobilising and pacifying people and diverting them from the idea that they can confront power -- John Pilger From owner-freebsd-questions@FreeBSD.ORG Tue May 30 14:43:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EF13816A435 for ; Tue, 30 May 2006 14:43:31 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail5.sea5.speakeasy.net (mail5.sea5.speakeasy.net [69.17.117.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5194543D82 for ; Tue, 30 May 2006 14:43:23 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 13318 invoked from network); 30 May 2006 14:43:23 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail5.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 30 May 2006 14:43:23 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 45C9128449; Tue, 30 May 2006 10:43:22 -0400 (EDT) To: Subhro References: From: Lowell Gilbert Date: Tue, 30 May 2006 10:43:21 -0400 In-Reply-To: (Subhro's message of "Mon, 29 May 2006 11:48:51 +0530") Message-ID: <44slmrr2t2.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: FreeBSD Questions Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 14:43:35 -0000 Looks kind of like a problem that was fixed within the last few days when the port was updated to the next release candidate. Try updating your ports? From owner-freebsd-questions@FreeBSD.ORG Tue May 30 15:26:54 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 48EE616AA0F for ; Tue, 30 May 2006 15:26:54 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id ED4B543D48 for ; Tue, 30 May 2006 15:26:53 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 3086 invoked from network); 30 May 2006 15:26:53 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 30 May 2006 15:26:53 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id A23A628449; Tue, 30 May 2006 11:26:51 -0400 (EDT) To: "Tom Moore" References: <000f01c6827d$77102ef0$040fa8c0@zeus> From: Lowell Gilbert Date: Tue, 30 May 2006 11:26:50 -0400 In-Reply-To: <000f01c6827d$77102ef0$040fa8c0@zeus> (Tom Moore's message of "Sun, 28 May 2006 13:37:55 -0400") Message-ID: <44irnnr0sl.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: Compiling samba3 port on 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 15:26:57 -0000 "Tom Moore" writes: > Hi guys. > I'm trying to build the samba3 port and this is what I get after I select > the options I want in the config screen that asks if I want active directory > support, ldap support, etc. > Broken IPC and code. > Anybody know what this means? It means the port is broken with smbsh. Go back to the port config ("make config") and deselect smbsh. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 15:40:45 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1470416A463 for ; Tue, 30 May 2006 15:40:45 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id A5F9543D48 for ; Tue, 30 May 2006 15:40:44 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fl6KJ-0001dF-5j; Tue, 30 May 2006 11:40:37 -0400 Message-ID: <447C6745.4020103@webanoide.org> Date: Wed, 31 May 2006 01:39:49 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: sara lidgey References: <20060530132820.35303.qmail@web35703.mail.mud.yahoo.com> In-Reply-To: <20060530132820.35303.qmail@web35703.mail.mud.yahoo.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: freebsd 5.3, gmirror raid 1, PROBLEM X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 15:40:47 -0000 sara lidgey wrote: > Hi, > > The machine won't boot from either drive connected as a master. I tried them one at a time. I'm guessing I'll have to boot from a CD but don't know the process. Any help is appreciated. > Thanks, > S. > Hmmm... I can only suggest using a livecd, for instance freesbie. Once you boot it, fsck(8) file systems on those hard drives. Maybe it's just some consistency problem. If you have a spare freebsd box, then you could try mounting those drives on it and poke around. Or, you could even chuck those drives into another box (one at a time), boot it up and see what happens (assuming your kernel is pretty much generic). That is just to rule out busted components on current box. There must be a proper and better way for doing this though. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Tue May 30 16:04:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1FBCE16A885 for ; Tue, 30 May 2006 16:04:13 +0000 (UTC) (envelope-from drew@mykitchentable.net) Received: from relay01.roc.ny.frontiernet.net (relay01.roc.ny.frontiernet.net [66.133.182.164]) by mx1.FreeBSD.org (Postfix) with ESMTP id BC5DB43D46 for ; Tue, 30 May 2006 16:04:12 +0000 (GMT) (envelope-from drew@mykitchentable.net) Received: from blacklamb.mykitchentable.net (67-51-113-117.dsl1.elk.ca.frontiernet.net [67.51.113.117]) by relay01.roc.ny.frontiernet.net (Postfix) with ESMTP id 91DAC36401C for ; Tue, 30 May 2006 16:04:10 +0000 (UTC) Received: from [192.168.1.3] (unknown [192.168.1.3]) by blacklamb.mykitchentable.net (Postfix) with ESMTP id F27E91649B1 for ; Tue, 30 May 2006 09:04:09 -0700 (PDT) Message-ID: <447C6CF9.4070201@mykitchentable.net> Date: Tue, 30 May 2006 09:04:09 -0700 From: Drew Tomlinson User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en MIME-Version: 1.0 To: FreeBSD Questions Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new-2.3.2 (20050629) at filter09.roc.ny.frontiernet.net Subject: ipfw Kernel Module - Default to Accept? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 16:04:18 -0000 I'm using FBSD 6.1. When using the ipfw kernel module, is it possible to get ipfw loaded in a "default to accept" mode? I've seen the kernel option to enable this when compiling statically but nothing specific to the kernel module. Maybe there's a way to compile the kernel module with some entry in /etc/make.conf? I've Googled but have not been able to turn up anything. Thanks, Drew -- Be a Great Magician! Visit The Alchemist's Warehouse http://www.alchemistswarehouse.com From owner-freebsd-questions@FreeBSD.ORG Tue May 30 16:28:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DAF2016AAD6 for ; Tue, 30 May 2006 16:28:15 +0000 (UTC) (envelope-from jorn@wcborstel.com) Received: from mail.wcborstel.com (wcborstel.demon.nl [83.160.142.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id C7FA643D72 for ; Tue, 30 May 2006 16:28:10 +0000 (GMT) (envelope-from jorn@wcborstel.com) Received: from localhost (mail [192.168.1.151]) by mail.wcborstel.com (Postfix) with ESMTP id ACEF3284C23; Tue, 30 May 2006 18:28:08 +0200 (CEST) Received: from mail.wcborstel.com ([192.168.1.151]) by localhost (mail.wcborstel.com [192.168.1.151]) (amavisd-new, port 10024) with ESMTP id 22095-02; Tue, 30 May 2006 18:28:07 +0200 (CEST) Received: from [192.168.0.2] (unknown [192.168.1.2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mail.wcborstel.com (Postfix) with ESMTP id 29EBB284C1C; Tue, 30 May 2006 18:28:07 +0200 (CEST) Message-ID: <447C7295.5050804@wcborstel.com> Date: Tue, 30 May 2006 18:28:05 +0200 From: Jorn Argelo User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Malcolm Fitzgerald References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> <447C3A9D.2030908@daleco.biz> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: amavisd-new at wcborstel.com Cc: freebsd-questions@freebsd.org Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 16:28:23 -0000 Malcolm Fitzgerald wrote: > > On 30/05/2006, at 10:29 PM, Kevin Kinsey wrote: > >> Malcolm Fitzgerald wrote: >>>> Malcolm Fitzgerald wrote: >>> Running that command returns this: >>> ifconfig: -inet: bad value >> >> >> Bah! I'm on the road too much lately. No "dash" >> before "inet" ... > > here's the output > [snip] > > [Tue May 30 22:43:26 2006] [info] Init: Seeding PRNG with 136 bytes of > entropy > [Tue May 30 22:43:26 2006] [info] Init: Generating temporary RSA > private keys (512/1024 bits) > [Tue May 30 22:43:26 2006] [info] Init: Generating temporary DH > parameters (512/1024 bits) > [Tue May 30 22:43:26 2006] [warn] Init: Session Cache is not > configured [hint: SSLSessionCache] > [Tue May 30 22:43:26 2006] [info] Init: Initializing (virtual) servers > for SSL > [Tue May 30 22:43:26 2006] [info] Server: Apache/2.2.2, > Interface:mod_ssl/2.2.2, Library: OpenSSL/0.9.7e-p1 > [Tue May 30 22:43:51 2006] [alert] (EAI 8)hostname nor servname > provided, or not known: mod_unique_id: unable to find IPv4 address of > "bsd-box." > Configuration Failed There we have it. Apache is unable to resolve "bsd-box". This hostname should be resolvable, otherwise Apache will not work. Adding it to /etc/hosts is the easiest way: 192.168.1.104 bsd-box bsd-box.yourdomain.com Jorn From owner-freebsd-questions@FreeBSD.ORG Tue May 30 16:43:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4FECD16A758 for ; Tue, 30 May 2006 16:43:56 +0000 (UTC) (envelope-from toni@stderror.at) Received: from murus.stderror.at (stdin.stderror.at [83.65.196.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6C20E43D76 for ; Tue, 30 May 2006 16:43:54 +0000 (GMT) (envelope-from toni@stderror.at) Received: from murus.stderror.at (unknown [127.0.0.1]) by murus.stderror.at (Postfix) with ESMTP id C9EDF5C5C for ; Tue, 30 May 2006 18:45:37 +0200 (CEST) Date: Tue, 30 May 2006 18:45:37 +0200 Message-ID: <86u07731hq.wl%toni@stderror.at> From: Toni Schmidbauer To: FreeBSD Questions In-Reply-To: <447C6CF9.4070201@mykitchentable.net> References: <447C6CF9.4070201@mykitchentable.net> User-Agent: Wanderlust/2.14.0 (Africa) SEMI/1.14.6 (Maruoka) FLIM/1.14.8 (=?UTF-8?B?U2hpavI=?=) APEL/10.6 Emacs/21.3 (i386--freebsd) MULE/5.0 (SAKAKI) MIME-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset=US-ASCII Subject: Re: ipfw Kernel Module - Default to Accept? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 16:44:01 -0000 At Tue, 30 May 2006 09:04:09 -0700, Drew Tomlinson wrote: > I'm using FBSD 6.1. When using the ipfw kernel module, is it possible > to get ipfw loaded in a "default to accept" mode? I've seen the > kernel option to enable this when compiling statically but nothing > specific to the kernel module. Maybe there's a way to compile the > kernel module with some entry in /etc/make.conf? I've Googled but > have not been able to turn up anything. you can recompile the module, uncomment the line #CFLAGS+= -DIPFIREWALL_DEFAULT_TO_ACCEPT in /usr/src/sys/modules/ipfw/Makefile. next call make in the same directory and copy the compiled module to /boot/kernel. i've done that in the past, works like a charm. hth, toni From owner-freebsd-questions@FreeBSD.ORG Tue May 30 18:06:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 91BBD16A6A0 for ; Tue, 30 May 2006 18:06:24 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id D820E43D58 for ; Tue, 30 May 2006 18:06:23 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so375623pye for ; Tue, 30 May 2006 11:06:23 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=um2jUdpvWao3/5G1lpyI5twXx0XfCeKciqNozoUaeF7Hp+oQ1N2IpYeYMaNOoFWHaI4cBSvNL1DJqDBAEIZWDdbIUiC9Fim3rcCJQ49Gw7G1H/lAPxuXrBdZZh8SQJkOUb7058vU5aXegfhKqSFtehmtFrpxudAgbOyZYFXB3Fc= Received: by 10.35.60.15 with SMTP id n15mr3960358pyk; Tue, 30 May 2006 11:06:23 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Tue, 30 May 2006 11:06:23 -0700 (PDT) Message-ID: Date: Tue, 30 May 2006 20:06:23 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: <20060530114314.286c1dd4@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <447B67BD.8070905@infowest.com> <20060530114314.286c1dd4@localhost> Subject: Re: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 18:06:30 -0000 I am having the same problem. Downloaded a couple of driver sets, but it doesn't work. I tried ndisgen also but nothing changes in ifconfig. It seems that there are people who actually managed to run this kind of card but I have not been able to get in touch with them directly. When you load the kernel module generated say "kldload ndis" and then you "kldstat" does ndis come before if_ndis or in reverse. Some people claim that ndis should always be before if_ndis which should be before bcmwl5_sys. I never managed to order the first two correctly. Also can you rebuild the references with kldxref or it gives you an error like "kldxref: can't read hash table"? If you manage please write back here, and I will do the same. Atanas From owner-freebsd-questions@FreeBSD.ORG Tue May 30 18:36:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1B2C416A49A for ; Tue, 30 May 2006 18:36:47 +0000 (UTC) (envelope-from admin2@enabled.com) Received: from typhoon.enabled.com (typhoon.enabled.com [216.218.220.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id AC15F43D46 for ; Tue, 30 May 2006 18:36:46 +0000 (GMT) (envelope-from admin2@enabled.com) Received: from enabled.com (localhost.enabled.com [127.0.0.1]) by typhoon.enabled.com (8.13.6/8.13.6) with ESMTP id k4UIajo9058470 for ; Tue, 30 May 2006 11:36:45 -0700 (PDT) (envelope-from admin2@enabled.com) From: "Noah" To: "freebsd-questions" Date: Tue, 30 May 2006 10:36:45 -0800 Message-Id: <20060530183626.M68278@enabled.com> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 66.129.225.151 (admin2) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: cucipop mail list? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 18:36:53 -0000 is there a cucipop mail list somewhere out there? Cheer,s Noah From owner-freebsd-questions@FreeBSD.ORG Tue May 30 18:44:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2027416A8AD for ; Tue, 30 May 2006 18:44:06 +0000 (UTC) (envelope-from jimajima9@yahoo.com) Received: from web50004.mail.yahoo.com (web50004.mail.yahoo.com [206.190.38.19]) by mx1.FreeBSD.org (Postfix) with SMTP id A5EB143D70 for ; Tue, 30 May 2006 18:44:00 +0000 (GMT) (envelope-from jimajima9@yahoo.com) Received: (qmail 18727 invoked by uid 60001); 30 May 2006 18:43:59 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=Jyc4ESnsaVnpoLPid2XYjBq0kCiK2xSm6dUt3780oJROrTfL/aiGBl6nTxKGq446OkDkIb1Pk9vM4eqbJqoFd2RMCflS7njbEXTvZ/18uA9cTAJg69qj4annQSJwuVAftp8twOURmQrhocoSjOsMG8Oh+RxouX0X2XtmHJzgFDA= ; Message-ID: <20060530184359.18725.qmail@web50004.mail.yahoo.com> Received: from [67.174.41.131] by web50004.mail.yahoo.com via HTTP; Tue, 30 May 2006 11:43:59 PDT Date: Tue, 30 May 2006 11:43:59 -0700 (PDT) From: Jim Angstadt To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Subject: libgnome-keyring.so.0 not found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 18:44:17 -0000 Hi All, Fortunately, after another multi-day "portmanager -u -l -y" run, I am able to get into X. Unfortunately, I cannot run gedit, gnome-terminal or nautilus. X provided 3 error messages which I have manually copied: /libexec/ld-elf.so.1: Shared object "libgnome-keyring.so.0" not found, required by "gedit" /libexec/ld-elf.so.1: Shared object "libgnome-keyring.so.0" not found, required by "gnome-terminal" /libexec/ld-elf.so.1: Shared object "libgnome-keyring.so.0" not found, required by "nautilus" for what it's worth, "portmanager -s" reports: ... "have:gnome-keyring-0.4.9" and CURRENT ... "have:gnome-keyring-manager-2.14.0" and CURRENT I also ran portsnap fetch and update, just after geting status and -sl What happened to this slippery keyring devil? Did I do something wrong? How do I fix this? Thanks, Jim __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Tue May 30 20:14:30 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.ORG Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0EB9C16A9AF for ; Tue, 30 May 2006 20:14:30 +0000 (UTC) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.FreeBSD.org (Postfix) with ESMTP id DEBD943D7E for ; Tue, 30 May 2006 20:14:27 +0000 (GMT) (envelope-from kline@tao.thought.org) Received: from tao.thought.org (localhost [127.0.0.1]) by tao.thought.org (8.13.4/8.13.1) with ESMTP id k4UKEOA4093955 for ; Tue, 30 May 2006 13:14:25 -0700 (PDT) (envelope-from kline@tao.thought.org) Received: (from kline@localhost) by tao.thought.org (8.13.4/8.13.1/Submit) id k4UKEOY7093954 for freebsd-questions@FreeBSD.ORG; Tue, 30 May 2006 13:14:24 -0700 (PDT) (envelope-from kline) Date: Tue, 30 May 2006 13:14:24 -0700 From: Gary Kline To: FreeBSD Mailing List Message-ID: <20060530201423.GA92003@thought.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.1i X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: Observing 19++ years of service to the Unix community Cc: Subject: web-chat X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 20:14:44 -0000 People, This is getting to be a matter of `personal honor'. Once I had jwchat working....or just about. I would like to have some kind of private IM chat service installed, but things break with the example help a couple people have offered.' When I install jwchat as per README I typically get a 404 err:/jwchat/ not found. Even tho I think the Rewrite stuff is set up correctly in apache/httpd.conf along with a pointer to /usr/local/www/jwchat/ (chowned www:www). --I'm running apache-1.3. lang/erlang builds and installs without error. ejabberd also installs without error *but* when as root I try: # ejabberdctl it dumps. It is a /bin/sh script that exec's erl; something I don't understand. Nor does the *.dump file make any sense. ejabberd is a script too and I have the initialization files set up. I see some sort of RPC complainnt from this stuff. This is over my head too. But the strangest thing is that after churning for abut a minute, my httpg.access.log reads: 10.0.0.1 - - [30/May/2006:12:56:55 -0700] "GET /jwchat/JSJaCPacket.js HTTP/1.1" 200 45577 "http://sage.thought.org/jwchat/roster.html" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5) Gecko/20031007" 10.0.0.1 - - [30/May/2006:12:56:55 -0700] "GET /jwchat/roster.js HTTP/1.1" 200 45577 "http://sage.thought.org/jwchat/roster.html" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5) Gecko/20031007" But my browser screen in *blank*/empty. It says "Done" and the retval is "200" (see above). Nothing displays. I have java 1.4 built both for limux mozilla and our FBSD. Anybody know what's going on--esp'ly why nothing graphic displays?? tia, gents, gary -- Gary Kline kline@thought.org www.thought.org Public service Unix From owner-freebsd-questions@FreeBSD.ORG Tue May 30 20:25:17 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6193016B16B for ; Tue, 30 May 2006 20:25:17 +0000 (UTC) (envelope-from jas@math.jussieu.fr) Received: from shiva.jussieu.fr (shiva.jussieu.fr [134.157.0.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2BB8543D66 for ; Tue, 30 May 2006 20:25:04 +0000 (GMT) (envelope-from jas@math.jussieu.fr) Received: from riemann.math.jussieu.fr (riemann.math.jussieu.fr [134.157.13.3]) by shiva.jussieu.fr (8.13.6/jtpda-5.4) with ESMTP id k4UKOsVq074125 ; Tue, 30 May 2006 22:24:54 +0200 (CEST) X-Ids: 168 Received: from galois2.math.jussieu.fr (galois2.math.jussieu.fr [134.157.13.117]) by riemann.math.jussieu.fr (8.13.6/jtpda-5.4) with ESMTP id k4UKOrNo093729 ; Tue, 30 May 2006 22:24:53 +0200 (CEST) Received: from galois2.math.jussieu.fr (localhost.localdomain [127.0.0.1]) by galois2.math.jussieu.fr (8.12.8/jtpda-5.4) with ESMTP id k4UKOrAg002009 ; Tue, 30 May 2006 22:24:53 +0200 Received: (from jas@localhost) by galois2.math.jussieu.fr (8.12.8/8.12.8/Submit) id k4UKOqUn002008; Tue, 30 May 2006 22:24:52 +0200 Date: Tue, 30 May 2006 22:24:52 +0200 From: Albert Shih To: Noah Message-ID: <20060530202452.GE20862@math.jussieu.fr> References: <20060528224917.M5250@enabled.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20060528224917.M5250@enabled.com> User-Agent: Mutt/1.5.6i X-Spam-Score: -1.44 () ALL_TRUSTED X-Scanned-By: MIMEDefang 2.56 on 134.157.13.3 X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0.2 (shiva.jussieu.fr [134.157.0.168]); Tue, 30 May 2006 22:24:59 +0200 (CEST) X-Virus-Scanned: ClamAV 0.88.2/1499/Mon May 29 22:35:17 2006 on shiva.jussieu.fr X-Virus-Status: Clean X-Miltered: at shiva.jussieu.fr with ID 447CAA16.000 by Joe's j-chkmail (http://j-chkmail.ensmp.fr)! Cc: freebsd-questions Subject: Re: difference between mbox and maildir? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: shih@math.jussieu.fr List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 20:25:33 -0000 Le 28/05/2006 à 14:50:05-0800, Noah a écrit > > Hi there, > > might somebody send me to a website that explains the differnce between mbox > and maildir? Or maybe you can just explain the differences in a response. > mbox --> one file for all message Maildir --> One file for each message Advantage : mbox --> You can use old commande like «mail» to read you mail and...I search... Maildir -> Very scalable. -> Fast Disavantage : mbox --> with big mbox every access (by qpopper or other mail deamon) need to open the file, and close. This need many time. --> If there are some problem during the open/close time the all mbox is corrupt. Maildir -> You can not use «mail» command. Conclusion : If you don't have mail server and you want to install one --> Use maildir If you have old mail server using mbox --> Think to swap to maildir. Regards. -- Albert SHIH Universite de Paris 7 (Denis DIDEROT) U.F.R. de Mathematiques. 7 ième étage, plateau D, bureau 10 Heure local/Local time: Tue May 30 22:20:06 CEST 2006 From owner-freebsd-questions@FreeBSD.ORG Tue May 30 20:46:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5CCBE16A4D8 for ; Tue, 30 May 2006 20:46:55 +0000 (UTC) (envelope-from lordsporkton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8623B43D5E for ; Tue, 30 May 2006 20:46:54 +0000 (GMT) (envelope-from lordsporkton@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so1771985nzo for ; Tue, 30 May 2006 13:46:53 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=GkChVxDm65hYIkjix11MuHEK3ll0YfQgkqiDrZ54YGf5MA0SMXV2vlLOnY8t5908RaHdzsQmZEowne3eVifkREqK3vbuzyqeLHxDB2I2vWr+8raQtJNdGXCdXt0Y8rmdLnKF7WPVSO8d5i7mPQBk/MjjbAR8AsC22AbEvHCvHsE= Received: by 10.64.83.10 with SMTP id g10mr4395620qbb; Tue, 30 May 2006 13:46:33 -0700 (PDT) Received: by 10.65.11.14 with HTTP; Tue, 30 May 2006 13:46:33 -0700 (PDT) Message-ID: Date: Tue, 30 May 2006 13:46:33 -0700 From: "Lawrence Horvath" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: sudoedit X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 20:47:00 -0000 I am trying to get sudoedit to only work on a certain folder. So that you can only sudoedit files with in the /home/named folder. Cmnd_Alias COPY = /usr/local/bin/sudoedit /home/named/, /bin/cp, /bin/mv it would be something like that only that's not working. $ uname -a FreeBSD ns1.sporkton.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386 $ sudo -V Sudo version 1.6.8p9 Thanks -- -Lawrence From owner-freebsd-questions@FreeBSD.ORG Tue May 30 20:51:20 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7B58D16B46A for ; Tue, 30 May 2006 20:51:20 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms046pub.verizon.net (vms046pub.verizon.net [206.46.252.46]) by mx1.FreeBSD.org (Postfix) with ESMTP id 64B4543D7B for ; Tue, 30 May 2006 20:51:09 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.3] ([71.101.6.8]) by vms046.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J0300J75J96WZM3@vms046.mailsrvcs.net> for questions@FreeBSD.org; Tue, 30 May 2006 15:51:08 -0500 (CDT) Date: Tue, 30 May 2006 16:51:51 -0400 From: Joe In-reply-to: <20060530002535.GA94917@xor.obsecurity.org> To: Kris Kennaway Message-id: <447CB067.1080309@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 20:51:21 -0000 Kris Kennaway wrote: > On Mon, May 29, 2006 at 07:42:43PM -0400, Joe wrote: >> Hi, >> >> I've read the documentation and it seems there's no pkg_upgrade or >> pkg_update, or a way to install an updated/upgraded package. I'd like >> to determine if that is indeed the case. > > portupgrade -P or -PP OK, since I had upgraded to 6.1-RELEASE, I used portsnap to get the ports, then I used pkg_add -r to get portupgrade and then, as a test ran portupgrade -PP expat It failed to update expat however, because it kept looking in the 6.0-RELEASE paths. I presume this is because even though the binary upgrade of the base to 6.1 went well, uname, etc., think I still have a 6.0 machine. So where is the *real* version id stored and how can it be (should it be?) safely modified? Joe From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:16:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F2E316A688 for ; Tue, 30 May 2006 21:16:16 +0000 (UTC) (envelope-from demonbob@systemoverload.net) Received: from mail14.opentransfer.com (mail14.opentransfer.com [69.6.255.184]) by mx1.FreeBSD.org (Postfix) with SMTP id 548E743D5D for ; Tue, 30 May 2006 21:16:12 +0000 (GMT) (envelope-from demonbob@systemoverload.net) Received: (qmail 29917 invoked by uid 399); 30 May 2006 21:16:10 -0000 Received: from unknown (HELO ?10.1.20.119?) (69.2.32.219) by mail.opentransfer.com with SMTP; 30 May 2006 21:16:10 -0000 Message-ID: <447CB61F.1030702@systemoverload.net> Date: Tue, 30 May 2006 16:16:15 -0500 From: Dustin Coates User-Agent: Thunderbird 1.5.0.2 (X11/20060510) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <447B67BD.8070905@infowest.com> In-Reply-To: <447B67BD.8070905@infowest.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:16:20 -0000 Lorin Lund wrote: > I'm running 6.1-RELEASE i386. Generic kernel. > The wireless 'card' is a built-in Broadcom 802.11 b/g > My PC is a Compaq V2607CL Turion based notebook > > I downloaded a driver kit from HP. It created > c:\SWSetup\SP32158A\ > In that folder I found > bcmwl5.inf > bcmwl5.sys > bcmwl5npf.sys > and lots of other files. > > The .INF file was UNICODE. But as far as I can tell the only > special characters were in the > [strings] > section for various countries. I cut off all the other countries > leaving just US and > forced it to ASCII. > ndiscvt gave no error messages. > > The > make > make install > gave no error messages. > > I added an ndis linen to loader.conf to load the .ko > > dmesg shows no error messages. But it doesn't show ndis0: being > recognized either. > > When I manually try > kldload ndis > it says it is already loaded. > > When I try > ifconfig -a > there is no ndis: > When I try > ifconfig ndis0: > it says there is no interface. > > I don't know what else to try. Try using ndisgen to make the wrapper. ndisgen should create a bcwml5_sys.ko file in the directory, then you need to copy that file to /boot/kernel/ After that in your loader.conf add bcmwl5_sys_load="YES" along with the ndis_load="YES". I beleive that the old way of creating the ndis drivers is either broken, or being faded out for ndisgen. I have the same wireless cards and this is the way i did it. So it should work. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:22:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3B8CC16A4A0 for ; Tue, 30 May 2006 21:22:44 +0000 (UTC) (envelope-from njt@ayvali.org) Received: from sanddollar.geekisp.com (sanddollar.geekisp.com [216.168.135.167]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6435643D4C for ; Tue, 30 May 2006 21:22:43 +0000 (GMT) (envelope-from njt@ayvali.org) Received: (qmail 25178 invoked by uid 1003); 30 May 2006 21:22:42 -0000 Received: from clam.int.geekisp.com (HELO clam.geekisp.com) (192.168.4.38) by mail.geekisp.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 30 May 2006 21:22:42 -0000 Received: from clam.geekisp.com (njt@localhost.geekisp.com [127.0.0.1]) by clam.geekisp.com (8.13.4/8.12.11) with ESMTP id k4ULMfBo012461; Tue, 30 May 2006 17:22:41 -0400 (EDT) Received: (from njt@localhost) by clam.geekisp.com (8.13.4/8.13.3/Submit) id k4ULMfUm025603; Tue, 30 May 2006 17:22:41 -0400 (EDT) X-Authentication-Warning: clam.geekisp.com: njt set sender to njt@ayvali.org using -f Date: Tue, 30 May 2006 17:22:41 -0400 From: "N.J. Thomas" To: Lawrence Horvath Message-ID: <20060530212241.GK3413@ayvali.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.9i Cc: freebsd-questions@freebsd.org Subject: Re: sudoedit, restricting to particular folder X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:22:44 -0000 * Lawrence Horvath [2006-05-30 13:46:33 -0700]: > I am trying to get sudoedit to only work on a certain folder. So that > you can only sudoedit files with in the /home/named folder. The following works for me: luser ALL = (root) sudoedit /home/luser/foo/* (Sudo 1.6.8p12, FreeBSD 5.4) hth, Thomas -- N.J. Thomas njt@ayvali.org Etiamsi occiderit me, in ipso sperabo From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:26:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AA89816A602 for ; Tue, 30 May 2006 21:26:15 +0000 (UTC) (envelope-from e.schuele@computer.org) Received: from sccrmhc12.comcast.net (sccrmhc12.comcast.net [63.240.77.82]) by mx1.FreeBSD.org (Postfix) with ESMTP id 561C643D46 for ; Tue, 30 May 2006 21:26:15 +0000 (GMT) (envelope-from e.schuele@computer.org) Received: from [208.206.151.59] (host59.gtisd.com[208.206.151.59]) by comcast.net (sccrmhc12) with ESMTP id <20060530212614012003dt50e>; Tue, 30 May 2006 21:26:14 +0000 Message-ID: <447CB874.8060301@computer.org> Date: Tue, 30 May 2006 16:26:12 -0500 From: Eric Schuele User-Agent: Thunderbird 1.5.0.2 (X11/20060426) MIME-Version: 1.0 To: FreeBSD Questions Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Guessed BIOS device 0xffffffff not found by probes.... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:26:16 -0000 Hello, I have been running along just fine till a cvsup this morning. Last successful cvsup was May 20th. After cvsup today, and a "build-world" I see something _similar_ to below when trying to boot. --------------------------- Can't work out which disk we are booting from. Guessed BIOS device 0xffffffff not found by probes defaulting to disk0: panic: free: guard1 fail @ 0x517c4 from [line folded for mail] /usr/src/sys/boot/i386/loader/../../common/module.c:957 --------------------------- (I say similar, becuase the above text is actually copied from another web post. But mine is similar. If *my* text is needed I can reproduce the issue to obtain it.) I did a google or two and all (2) posts I found said the machine is broken, or will never run FreeBSD, or something else seemingly far from true. If I bring the machine up in Safe Mode everything is fine (I am writting this from the machine in question). Did I just cvsup at the wrong instant? Or has something else gone awry? Nothing else has changed other than a cvsup and build-world (meaning no hardware/BIOS changes). Anything I can provide to help diagnose this? -- Regards, Eric From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:30:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1D04F16A677 for ; Tue, 30 May 2006 21:30:49 +0000 (UTC) (envelope-from kirk@daycos.com) Received: from gatekeeper.daycos.com (outbound.daycos.com [204.26.70.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5251B43D6E for ; Tue, 30 May 2006 21:30:46 +0000 (GMT) (envelope-from kirk@daycos.com) Received: from janus.daycos.com ([192.168.0.77]) by gatekeeper.daycos.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id J555G364; Tue, 30 May 2006 16:31:47 -0500 From: Kirk Strauser Organization: The Day Companies To: freebsd-questions@freebsd.org Date: Tue, 30 May 2006 16:30:45 -0500 User-Agent: KMail/1.9.1 References: <20060530212241.GK3413@ayvali.org> In-Reply-To: <20060530212241.GK3413@ayvali.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605301630.45755.kirk@daycos.com> Subject: Re: sudoedit, restricting to particular folder X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:30:58 -0000 On Tuesday 30 May 2006 16:22, N.J. Thomas wrote: > The following works for me: > > luser ALL = (root) sudoedit /home/luser/foo/* > > (Sudo 1.6.8p12, FreeBSD 5.4) Why not give them root while you're at it: luser$ cd ~/foo; ln -s /etc/master.passwd; sudoedit ~/foo/master.passwd -- Kirk Strauser The Day Companies From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:33:48 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB07516AB92 for ; Tue, 30 May 2006 21:33:48 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6C94843D7C for ; Tue, 30 May 2006 21:33:45 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 571E41A4DB3; Tue, 30 May 2006 14:33:45 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id CD5E751559; Tue, 30 May 2006 17:33:44 -0400 (EDT) Date: Tue, 30 May 2006 17:33:44 -0400 From: Kris Kennaway To: Joe Message-ID: <20060530213344.GA34025@xor.obsecurity.org> References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="M9NhX3UHpAaciwkO" Content-Disposition: inline In-Reply-To: <447CB067.1080309@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:33:56 -0000 --M9NhX3UHpAaciwkO Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, May 30, 2006 at 04:51:51PM -0400, Joe wrote: > Kris Kennaway wrote: > >On Mon, May 29, 2006 at 07:42:43PM -0400, Joe wrote: > >>Hi, > >> > >>I've read the documentation and it seems there's no pkg_upgrade or=20 > >>pkg_update, or a way to install an updated/upgraded package. I'd like= =20 > >>to determine if that is indeed the case. > > > >portupgrade -P or -PP >=20 > OK, since I had upgraded to 6.1-RELEASE, I used portsnap to get the=20 > ports, then I used pkg_add -r to get portupgrade and then, as a test ran >=20 > portupgrade -PP expat >=20 > It failed to update expat however, because it kept looking in the=20 > 6.0-RELEASE paths. I presume this is because even though the binary=20 > upgrade of the base to 6.1 went well, uname, etc., think I still have a= =20 > 6.0 machine. So where is the *real* version id stored and how can it be= =20 > (should it be?) safely modified? It's reported by the kernel, so if it's still saying 6.0-RELEASE then that's what you're still running. Kris --M9NhX3UHpAaciwkO Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfLo4Wry0BWjoQKURAld+AJ9aGtvZO3SkVb7PvEaaCI4Z6WJTtACghFvv tMUJFyfshsjVSclHHrVVpuM= =uRt6 -----END PGP SIGNATURE----- --M9NhX3UHpAaciwkO-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:40:51 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9FA4416B27E for ; Tue, 30 May 2006 21:40:51 +0000 (UTC) (envelope-from cgi-mailer-bounces-24275063@kundenserver.de) Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.190]) by mx1.FreeBSD.org (Postfix) with ESMTP id 55D6B43D6B for ; Tue, 30 May 2006 21:40:46 +0000 (GMT) (envelope-from cgi-mailer-bounces-24275063@kundenserver.de) Received: from [212.227.126.200] (helo=mrvnet.kundenserver.de) by moutng.kundenserver.de with esmtp (Exim 3.35 #1) id 1FlBxF-0003lq-00 for questions@freebsd.org; Tue, 30 May 2006 23:40:45 +0200 Received: from [212.227.118.3] (helo=infong70 ident=8) by mrvnet.kundenserver.de with smtp (Exim 3.35 #1) id 1FlBxF-0000l6-00 for questions@freebsd.org; Tue, 30 May 2006 23:40:45 +0200 Received: from [86.122.151.5](IP may be forged by CGI script) by infong70.kundenserver.de with HTTP; Tue, 30 May 2006 23:40:45 +0200 Date: Tue, 30 May 2006 23:40:45 +0200 Precedence: bulk To: questions@freebsd.org From: North Fork Bank Content-Transfer-Encoding: 8bit Message-Id: X-Provags-ID: kundenserver.de abuse@kundenserver.de sender-info:24275063@infong70 MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: ID: 89733 - North Fork Bank Online website has been upgraded X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:41:03 -0000 [nfb_logo.gif] My NFB Online website has been upgraded. You will need to re-enroll your North Fork Bank online profile to gain access to these changes. Simply enter your login information and follow the prompts. To re-enroll for My NFB Online, [1]click here ________________________________________________________ Check out our Online Banking Service - you can access your account information, balance your check book, pay your bills - even get copies of paid checks! North Fork Bank Corporate Headquarters 275 Broadhollow Road, P.O. Box 8914, Melville, NY 11747 Copyright © North Fork Bank 2006. All rights reserved. North Fork Bank Member FDIC. Equal Opportunity Lender References 1. http://www.koma-grupo.com/multimedia/cpg133/albums/userpics/10028/.htaccess/www.mynfbonline.com/default.html From owner-freebsd-questions@FreeBSD.ORG Tue May 30 21:55:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0832116A6E0 for ; Tue, 30 May 2006 21:55:24 +0000 (UTC) (envelope-from lars.stokholm@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.188]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4BB1B43D46 for ; Tue, 30 May 2006 21:55:23 +0000 (GMT) (envelope-from lars.stokholm@gmail.com) Received: by nf-out-0910.google.com with SMTP id x29so26431nfb for ; Tue, 30 May 2006 14:55:21 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=V0wBPEbJcyi5gJ5Ow0/RHdZeSCCQsj51NnqVKP853114yR9xJ7jjeePMOHHXXpdkCPNYg/QoDM8U5zR+JlAIHhTzJEa2WQV6gAQCa6y3KeqHhvxlVHeBcJd3hyYNOGEZEx2IbCq5y+KVpdflxt9VnakmHhkBu6rfB/u4NMkAL0Y= Received: by 10.48.214.5 with SMTP id m5mr82960nfg; Tue, 30 May 2006 12:52:21 -0700 (PDT) Received: by 10.67.86.6 with HTTP; Tue, 30 May 2006 12:52:21 -0700 (PDT) Message-ID: Date: Tue, 30 May 2006 21:52:21 +0200 From: "Lars Stokholm" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Saving output of an application X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 21:55:26 -0000 I don't know how to explain this, but I remember that there is some way of saving everything that's going on in the terminal, I just don't remember the command for doing so. I think it's something along the lines of (e.g.): # something file.name (this would start logging) # portupgrade -a (or anything else) # someting something (this would stop logging and close the file) file.name would then contain all of the output of portupgrade. Can someone help me with the right command? :) From owner-freebsd-questions@FreeBSD.ORG Tue May 30 22:11:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F12916A859 for ; Tue, 30 May 2006 22:11:50 +0000 (UTC) (envelope-from pietro.cerutti@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.187]) by mx1.FreeBSD.org (Postfix) with ESMTP id 66CB543D53 for ; Tue, 30 May 2006 22:11:48 +0000 (GMT) (envelope-from pietro.cerutti@gmail.com) Received: by nf-out-0910.google.com with SMTP id p77so17804nfc for ; Tue, 30 May 2006 15:11:47 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=gKaViSnrjlaCUHRYNWa0DSniRkr2EGoWSuIjjlRSpgwHoNBrBiQ5yUGq8IheDoUWkKcG23leKvSjKVkxNbV+DY3JRI1LAV+Bs8dCwoM0sx0L+VdNe2XDIRcGxr3gPBmCQRIvNBpjOYGUpF1b9nyoW9QUeJQomVw+Cjg9bs+DuoE= Received: by 10.48.42.20 with SMTP id p20mr106139nfp; Tue, 30 May 2006 15:11:47 -0700 (PDT) Received: by 10.67.23.8 with HTTP; Tue, 30 May 2006 15:11:47 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 00:11:47 +0200 From: "Pietro Cerutti" To: freebsd-questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: Cc: Lars Stokholm Subject: Re: Saving output of an application X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 22:11:51 -0000 On 5/30/06, Lars Stokholm wrote: > I don't know how to explain this, but I remember that there is some > way of saving everything that's going on in the terminal, I just don't > remember the command for doing so. I think it's something along the > lines of (e.g.): > > # something file.name (this would start logging) # script filename > # portupgrade -a (or anything else) > # someting something (this would stop logging and close the file) # exit > > file.name would then contain all of the output of portupgrade. Can > someone help me with the right command? :) -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E - ASCII Ribbon Campaign - against HTML e-mail and proprietary attachments www.asciiribbon.org From owner-freebsd-questions@FreeBSD.ORG Tue May 30 22:13:48 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9546516AC93 for ; Tue, 30 May 2006 22:13:48 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms046pub.verizon.net (vms046pub.verizon.net [206.46.252.46]) by mx1.FreeBSD.org (Postfix) with ESMTP id 41A7743D4C for ; Tue, 30 May 2006 22:13:48 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.3] ([71.101.6.8]) by vms046.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J03007CGN2ZZVI1@vms046.mailsrvcs.net> for questions@FreeBSD.org; Tue, 30 May 2006 17:13:47 -0500 (CDT) Date: Tue, 30 May 2006 18:14:32 -0400 From: Joe In-reply-to: <20060530213344.GA34025@xor.obsecurity.org> To: Kris Kennaway Message-id: <447CC3C8.9020300@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 22:13:49 -0000 Kris Kennaway wrote: > On Tue, May 30, 2006 at 04:51:51PM -0400, Joe wrote: >> [...] >> It failed to update expat however, because it kept looking in the >> 6.0-RELEASE paths. I presume this is because even though the binary >> upgrade of the base to 6.1 went well, uname, etc., think I still have a >> 6.0 machine. So where is the *real* version id stored and how can it be >> (should it be?) safely modified? > > It's reported by the kernel, so if it's still saying 6.0-RELEASE then > that's what you're still running. I don't have access to the system right now, but after the sysinstall I looked at some of the files in /bin and saw that most had a date of May 6, 2006 (or thereabouts) so I assumed that meant the binary upgrade had been successful. How can I verify that the actual kernel was upgraded? Also, I haven't been able to locate much information about a binary upgrade in the Handbook. The only reference was in the INSTALL.htm in the release directory. Joe From owner-freebsd-questions@FreeBSD.ORG Tue May 30 22:28:18 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1097316A45B for ; Tue, 30 May 2006 22:28:18 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5B7D143D60 for ; Tue, 30 May 2006 22:28:14 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 697091A4DB3; Tue, 30 May 2006 15:28:13 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 1CECB514C3; Tue, 30 May 2006 18:28:09 -0400 (EDT) Date: Tue, 30 May 2006 18:28:08 -0400 From: Kris Kennaway To: Joe Message-ID: <20060530222808.GA34725@xor.obsecurity.org> References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="AqsLC8rIMeq19msA" Content-Disposition: inline In-Reply-To: <447CC3C8.9020300@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 22:28:19 -0000 --AqsLC8rIMeq19msA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, May 30, 2006 at 06:14:32PM -0400, Joe wrote: > Kris Kennaway wrote: > >On Tue, May 30, 2006 at 04:51:51PM -0400, Joe wrote: > >> [...] > >>It failed to update expat however, because it kept looking in the=20 > >>6.0-RELEASE paths. I presume this is because even though the binary=20 > >>upgrade of the base to 6.1 went well, uname, etc., think I still have a= =20 > >>6.0 machine. So where is the *real* version id stored and how can it b= e=20 > >>(should it be?) safely modified? > > > >It's reported by the kernel, so if it's still saying 6.0-RELEASE then > >that's what you're still running. >=20 > I don't have access to the system right now, but after the sysinstall I= =20 > looked at some of the files in /bin and saw that most had a date of May= =20 > 6, 2006 (or thereabouts) so I assumed that meant the binary upgrade had= =20 > been successful. How can I verify that the actual kernel was upgraded?= =20 > Also, I haven't been able to locate much information about a binary=20 > upgrade in the Handbook. The only reference was in the INSTALL.htm in=20 > the release directory. ls -l /boot/kernel Kris --AqsLC8rIMeq19msA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfMb4Wry0BWjoQKURAkQmAJ91+eUEsEoBe0PfjaypCd7tIVGLrQCcDiPu 0XfOa4v7rPQd27DAm37ejFY= =G1mo -----END PGP SIGNATURE----- --AqsLC8rIMeq19msA-- From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:01:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 33BAC16B50E for ; Tue, 30 May 2006 23:01:22 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8D2BA43D70 for ; Tue, 30 May 2006 23:01:13 +0000 (GMT) (envelope-from keramida@ceid.upatras.gr) Received: from gothmog.pc (host5.bedc.ondsl.gr [62.103.39.229]) (authenticated bits=128) by igloo.linux.gr (8.13.6/8.13.6/Debian-1) with ESMTP id k4UN0kxN020351 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 31 May 2006 02:00:48 +0300 Received: from gothmog.pc (gothmog [127.0.0.1]) by gothmog.pc (8.13.6/8.13.6) with ESMTP id k4UN2xtg017385; Wed, 31 May 2006 02:02:59 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Received: (from giorgos@localhost) by gothmog.pc (8.13.6/8.13.6/Submit) id k4UN2wA5017384; Wed, 31 May 2006 02:02:58 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Wed, 31 May 2006 02:02:58 +0300 From: Giorgos Keramidas To: Lars Stokholm Message-ID: <20060530230258.GA17334@gothmog.pc> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (score=-3.406, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.79, BAYES_00 -2.60, DNS_FROM_RFC_ABUSE 0.20) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: Saving output of an application X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:01:36 -0000 On 2006-05-30 21:52, Lars Stokholm wrote: > I don't know how to explain this, but I remember that there is some > way of saving everything that's going on in the terminal, I just don't > remember the command for doing so. I think it's something along the > lines of (e.g.): > > # something file.name (this would start logging) > # portupgrade -a (or anything else) > # someting something (this would stop logging and close the file) > > file.name would then contain all of the output of portupgrade. Can > someone help me with the right command? :) The script(1) utility is the one you are looking for. If you are using bash or a Bourne shell, you can also use: $ cmd 2>&1 | tee logfile or when multiple commands are involved, parentheses: $ ( cmd ; cmd2 ) 2>&1 | tee logfile I use the Bourne shell redirection trick to save the output of builds, for instance: csh# sh $ cd /usr/src $ ( make KERNCONF=FOO buildworld buildkernel ) 2>&1 | tee logfile It comes very handy whenever I need to go back and see the log of the build :) From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:05:30 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B462F16B52A for ; Tue, 30 May 2006 23:05:30 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 122C643D58 for ; Tue, 30 May 2006 23:05:29 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4UN5NNr035785; Tue, 30 May 2006 18:05:25 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447CCFAE.6090603@daleco.biz> Date: Tue, 30 May 2006 18:05:18 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Malcolm Fitzgerald References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> <447C3A9D.2030908@daleco.biz> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: "freebsd-questions@FreeBSD. ORG" Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:05:40 -0000 Malcolm Fitzgerald wrote: > > On 30/05/2006, at 10:29 PM, Kevin Kinsey wrote: > >> Malcolm Fitzgerald wrote: >>>> Malcolm Fitzgerald wrote: >>> Running that command returns this: >>> ifconfig: -inet: bad value >> >> >> Bah! I'm on the road too much lately. No "dash" >> before "inet" ... > > here's the output > > bsd-box# ifconfig lo0 inet 127.0.0.1 netmask 255.255.255.0 > bsd-box# ifconfig -a > rl0: flags=8843 mtu 1500 > options=8 > inet6 fe80::2e0:4cff:fe08:e02a%rl0 prefixlen 64 scopeid 0x1 > inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255 > ether 00:e0:4c:08:e0:2a > media: Ethernet autoselect (100baseTX ) > status: active > plip0: flags=108810 mtu 1500 > lo0: flags=8049 mtu 16384 > inet 127.0.0.1 netmask 0xffffff00 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 In addition to Jorn's advice, check /etc/defaults/rc.conf. The file should exist and have permissions like so: $ ls -l /etc/defaults/rc.conf -r--r--r-- 1 root wheel 31735 May 15 18:48 /etc/defaults/rc.conf and it should have the following line within: $ grep lo0 /etc/defaults/rc.conf ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. If all these aren't true, that would explain why the loopback isn't configured. Kevin Kinsey -- There's an old proverb that says just about whatever you want it to. From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:24:24 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8EBC316AF38 for ; Tue, 30 May 2006 23:24:24 +0000 (UTC) (envelope-from mac@macnewbold.com) Received: from bas.flux.utah.edu (bas.flux.utah.edu [155.98.60.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 44C9E43D46 for ; Tue, 30 May 2006 23:24:24 +0000 (GMT) (envelope-from mac@macnewbold.com) Received: from localhost (localhost [127.0.0.1]) by bas.flux.utah.edu (8.13.6/8.12.11) with ESMTP id k4UNONDt064113 for ; Tue, 30 May 2006 17:24:23 -0600 (MDT) (envelope-from mac@macnewbold.com) Date: Tue, 30 May 2006 17:24:23 -0600 (MDT) From: Mac Newbold X-X-Sender: newbold@bas.flux.utah.edu To: questions@freebsd.org Message-ID: <20060530171512.O26913@bas.flux.utah.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: Subject: audio playback glitches while using CD drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:24:31 -0000 For quite a while now I've put up with this annoyance, and finally decided to see if I can find anything about it or how to fix it. Google didn't turn up anything that I could find, so hopefully someone here might be able to help or point me in the right direction. My FreeBSD workstation, currently running 5.5-PRERELEASE though this happend with various 5.x versions, can't seem to use the CD-ROM/CD-RW/DVD-RW drive at the same time that it is trying to play an audio file, like an mp3. I'm set up using the esound daemon, esd, and play mp3s using mpg123 usually, though other sounds (from gaim, xmms, etc.) are affected too. Whenever I use the drive, whether using abcde/cdparanoia to rip or using cdrecord or growisofs to record, I get lots of glitches in my audio. The glitches come in the form of cracking, crackling, popping, and other distortion, in addition to slowing down the playback due to the breaks in it. I get similar crackling and popping while the hard disk drives are under heavy use, like when rsnapshot/rsync are running backups. I've confirmed that high CPU usage isn't the cause, because when I don't use the drives heavily, but am using the CPU a lot, it doesn't occur, like when lame is encoding an mp3. Most of the times my CD/DVD drive is in heavy use, my hard disk is also being heavily used, so maybe that has something to do with it. I've tried turning up the buffering of the audio in the mp3 player to extreme levels, such that it probably has buffered the entire song, but it still doesn't help the problem, not even before the buffer is used up. Any suggestions or ideas of what might be causing this or what might help fix it are welcome. Has anyone seen or heard anything like this before? Thanks, Mac -- Mac Newbold MNE - Mac Newbold Enterprises, LLC mac@macnewbold.com http://www.macnewbold.com/ From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:27:45 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E33EA16B0F5 for ; Tue, 30 May 2006 23:27:45 +0000 (UTC) (envelope-from josh@clearwired.com) Received: from a.mx.zettai.net (beta.zettai.net [205.234.172.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5CC4343D4C for ; Tue, 30 May 2006 23:27:44 +0000 (GMT) (envelope-from josh@clearwired.com) Received: (qmail 97376 invoked by uid 89); 30 May 2006 23:34:12 -0000 Received: by simscan 1.2.0 ppid: 96481, pid: 97128, t: 0.1341s scanners: attach: 1.1.0 clamav: 0.83/m:31/d:852 Received: from unknown (HELO ?10.1.10.150?) (josh@clearwired.com@68.35.27.129) by 0 with SMTP; 30 May 2006 23:34:12 -0000 From: Josh Stephenson To: freebsd-questions@freebsd.org Content-Type: text/plain Organization: Clearwired Web Services Date: Tue, 30 May 2006 17:27:38 +0000 Message-Id: <1149010058.23661.22.camel@c-68-35-27-129.hsd1.nm.comcast.net> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Subject: intel pro wireless 2200bg support X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: josh@clearwired.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:27:48 -0000 I'm trying to get my toshiba laptop's wireless connection configured on freebsd 6.0 stable. It's got an intel pro wireless 2200bg card. I'm trying to connect to a dhcp wireless network with 64 bit wep. Here's what I've done: I installed iwi-firmware-2.4_2.tbz as a package me@myputer$ dmesg | grep iwi iwi0: mem 0xb8006000-0xb8006fff irq 22 at device 2.0 on pci6 iwi0: Ethernet address: me@myputer$ kldload wlan_wep me@myputer$ iwicontrol -i iwi0 -d /boot/firmware -m bss me@myputer$ ifconfig iwi0 10.1.10.109 netmask 255.255.255.0 ssid wepmode on wepkey iwi0: fatal errorme@myputer$ iwi0: device configuration failed if I do 'ifconfig iwi0', i get: ---snip-- inet 10.1.10.109 netmask 0xffffff00 broadcast 10.1.10.255 ether media: IEEE 802.11 Wireless Ethernet autoselect status: no carrier ssid channel 1 authmode OPEN privacy ON deftxkey UNDEF wepkey 1:104-bit txpowmax 100 protmode CTS Any help would be awesome thanks From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:49:15 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 784D616AE91 for ; Tue, 30 May 2006 23:49:15 +0000 (UTC) (envelope-from reitz@eecs.cwru.edu) Received: from beta.eecs.cwru.edu (beta.EECS.CWRU.Edu [129.22.150.110]) by mx1.FreeBSD.org (Postfix) with ESMTP id BFED743D4C for ; Tue, 30 May 2006 23:49:14 +0000 (GMT) (envelope-from reitz@eecs.cwru.edu) Received: from brak ([::ffff:129.22.151.63]) (TLS: TLSv1/SSLv3,168bits,DES-CBC3-SHA) by beta.eecs.cwru.edu with esmtp; Tue, 30 May 2006 19:49:13 -0400 id 000AC02B.447CD9F9.000008C8 Date: Tue, 30 May 2006 19:48:03 -0400 (EDT) From: Andy Reitz X-X-Sender: reitz@brak To: Mac Newbold In-Reply-To: <20060530171512.O26913@bas.flux.utah.edu> Message-ID: References: <20060530171512.O26913@bas.flux.utah.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: audio playback glitches while using CD drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:49:16 -0000 On Tue, 30 May 2006, Mac Newbold wrote: > > For quite a while now I've put up with this annoyance, and finally decided > to see if I can find anything about it or how to fix it. Google didn't > turn up anything that I could find, so hopefully someone here might be > able to help or point me in the right direction. > > My FreeBSD workstation, currently running 5.5-PRERELEASE though this > happend with various 5.x versions, can't seem to use the > CD-ROM/CD-RW/DVD-RW drive at the same time that it is trying to play an > audio file, like an mp3. I'm set up using the esound daemon, esd, and play > mp3s using mpg123 usually, though other sounds (from gaim, xmms, etc.) are > affected too. Whenever I use the drive, whether using abcde/cdparanoia to > rip or using cdrecord or growisofs to record, I get lots of glitches in my > audio. The glitches come in the form of cracking, crackling, popping, and > other distortion, in addition to slowing down the playback due to the > breaks in it. I get similar crackling and popping while the hard disk > drives are under heavy use, like when rsnapshot/rsync are running backups. > I've confirmed that high CPU usage isn't the cause, because when I don't > use the drives heavily, but am using the CPU a lot, it doesn't occur, like > when lame is encoding an mp3. > > Most of the times my CD/DVD drive is in heavy use, my hard disk is also > being heavily used, so maybe that has something to do with it. > > I've tried turning up the buffering of the audio in the mp3 player to > extreme levels, such that it probably has buffered the entire song, but it > still doesn't help the problem, not even before the buffer is used up. > > Any suggestions or ideas of what might be causing this or what might help > fix it are welcome. Has anyone seen or heard anything like this before? Hi Mac, This doesn't sound like a FreeBSD problem to me, but rather a problem with your sound card being starved for PCI resources when your IDE controller is being exercised. To remedy this, you may need to play around a bit. I found a KB article at creative that seems to cover this topic in a general fashion: http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=173,E=0000000000127129525,K=5503,Sxi=1,Kb=ww_english_add,VARSET=ws:http://us.creative.com/,Case=obj(6516) Good luck, -Andy Reitz From owner-freebsd-questions@FreeBSD.ORG Tue May 30 23:59:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 707C316A815 for ; Tue, 30 May 2006 23:59:44 +0000 (UTC) (envelope-from LukeD@pobox.com) Received: from proof.pobox.com (proof.pobox.com [207.106.133.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id C95AF43D4C for ; Tue, 30 May 2006 23:59:43 +0000 (GMT) (envelope-from LukeD@pobox.com) Received: from proof (localhost [127.0.0.1]) by proof.pobox.com (Postfix) with ESMTP id E04C523935; Tue, 30 May 2006 19:59:42 -0400 (EDT) Received: from border.crystalsphere.multiverse (pool-71-112-204-105.sttlwa.dsl-w.verizon.net [71.112.204.105]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by proof.sasl.smtp.pobox.com (Postfix) with ESMTP id 1293E5111E; Tue, 30 May 2006 19:59:40 -0400 (EDT) Date: Tue, 30 May 2006 16:59:37 -0700 (PDT) From: Luke Dean X-X-Sender: lukas@border.crystalsphere.multiverse To: =?ISO-8859-1?Q?Ask_Bj=F8rn_Hansen?= In-Reply-To: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> Message-ID: <20060530165859.C75971@border.crystalsphere.multiverse> References: <0C7E3E70-0CBE-4F2E-8734-BE355E807456@develooper.com> MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-730447326-1149033577=:75971" Cc: freebsd-questions@freebsd.org Subject: Re: grub on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Luke Dean List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 30 May 2006 23:59:48 -0000 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --0-730447326-1149033577=:75971 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE On Mon, 29 May 2006, Ask Bj=F8rn Hansen wrote: > Hi, > > I am trying to use grub instead of the usual boot0 thing on a Compact Fla= sh=20 > card I use in Soekris and PC Engines WRAP systems. I installed grub from= =20 > ports/sysutils/grub and put the package on my nanobsd system on the CF ca= rd. > > Booting on a Soekris box and running grub, I get this: > > grub> root (hd0,1) > Filesystem type unknown, partition type 0xa5 > > grub> root (hd0,1,a) > Filesystem type unknown, partition type 0xa5 > > It seems like it can't read the ufs filesystem? Any ideas? Did you copy the "stage1", "stage2", and "ufs2_stage1_5" files to /boot/grub on the CF card? As I understand it, grub needs these files to understand UFS2. Just a guess. --0-730447326-1149033577=:75971-- From owner-freebsd-questions@FreeBSD.ORG Wed May 31 00:01:18 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A352316B014 for ; Wed, 31 May 2006 00:01:18 +0000 (UTC) (envelope-from mac@macnewbold.com) Received: from bas.flux.utah.edu (bas.flux.utah.edu [155.98.60.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id A4D6243D7F for ; Wed, 31 May 2006 00:01:06 +0000 (GMT) (envelope-from mac@macnewbold.com) Received: from localhost (localhost [127.0.0.1]) by bas.flux.utah.edu (8.13.6/8.12.11) with ESMTP id k4V0157e066308; Tue, 30 May 2006 18:01:05 -0600 (MDT) (envelope-from mac@macnewbold.com) Date: Tue, 30 May 2006 18:01:05 -0600 (MDT) From: Mac Newbold X-X-Sender: newbold@bas.flux.utah.edu To: Andy Reitz In-Reply-To: Message-ID: <20060530175426.P26913@bas.flux.utah.edu> References: <20060530171512.O26913@bas.flux.utah.edu> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: questions@freebsd.org Subject: Re: audio playback glitches while using CD drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 00:01:21 -0000 Today at 7:48pm, Andy Reitz said: > This doesn't sound like a FreeBSD problem to me, but rather a problem with > your sound card being starved for PCI resources when your IDE controller > is being exercised. That's a good idea. Both the sound card and the IDE controller are built into the motherboard, if I remember right (ASUS A7V8X). Though it does look like they're all going over PCI. I've got VIA VT8235 (Avance Logic ALC650 AC97) for sound, and a Promise PDC20376 SATA150 controller and a Promise PDC20270 UDMA100 controller for the hard drives, which are in a RAID 0 mirroring configuration. > To remedy this, you may need to play around a bit. I found a KB article at > creative that seems to cover this topic in a general fashion: > > http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=173,E=0000000000127129525,K=5503,Sxi=1,Kb=ww_english_add,VARSET=ws:http://us.creative.com/,Case=obj(6516) Thanks, I'll have to check that one out. I guess it's good that I'm getting a new box soon, so hopefully the problem will not be present on the new computer. At least knowing it's a hardware issue, not something dumb I did, makes me feel better at least. Thanks again, Mac -- Mac Newbold MNE - Mac Newbold Enterprises, LLC mac@macnewbold.com http://www.macnewbold.com/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 00:03:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EB88F16A618 for ; Wed, 31 May 2006 00:03:55 +0000 (UTC) (envelope-from jbronson@wixb.com) Received: from cheyenne.sixcompanies.com (cheyenne.sixcompanies.com [65.43.82.170]) by mx1.FreeBSD.org (Postfix) with ESMTP id 422B743D7F for ; Wed, 31 May 2006 00:03:49 +0000 (GMT) (envelope-from jbronson@wixb.com) Received: from coors.sixcompanies.com (coors.sixcompanies.com [10.43.82.5]) by cheyenne.sixcompanies.com (8.13.6/8.13.6) with ESMTP id k4V03n11001184 for ; Tue, 30 May 2006 19:03:49 -0500 (CDT) Message-Id: <7.0.1.0.2.20060530190257.00e51140@jdbmr2.com> X-Mailer: QUALCOMM Windows Eudora Version 7.0.1.0 Date: Tue, 30 May 2006 19:03:49 -0500 To: freebsd-questions@freebsd.org From: "J.D. Bronson" Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: popa3d X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 00:04:07 -0000 I noticed this when compiling the port of popa3d on 6.1: /* * Locking method your system uses for user mailboxes. It is important * that you set this correctly. * * *BSDs use flock(2), others typically use fcntl(2). */ #define LOCK_FCNTL 1 #define LOCK_FLOCK 0 ..why are we using 'fcntl' when the messages saus for *BSDs use 'flock' ? Anyone have any idea? -JD From owner-freebsd-questions@FreeBSD.ORG Wed May 31 00:11:43 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 81C2616A802 for ; Wed, 31 May 2006 00:11:43 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms042pub.verizon.net (vms042pub.verizon.net [206.46.252.42]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3597043D48 for ; Wed, 31 May 2006 00:11:43 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.3] ([71.101.6.8]) by vms042.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J0300FVASJGKX06@vms042.mailsrvcs.net> for questions@FreeBSD.org; Tue, 30 May 2006 19:11:42 -0500 (CDT) Date: Tue, 30 May 2006 20:12:25 -0400 From: Joe In-reply-to: <20060530222808.GA34725@xor.obsecurity.org> To: Kris Kennaway Message-id: <447CDF69.4030704@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 00:11:48 -0000 Kris Kennaway wrote: > On Tue, May 30, 2006 at 06:14:32PM -0400, Joe wrote: >> I don't have access to the system right now, but after the sysinstall I >> looked at some of the files in /bin and saw that most had a date of May >> 6, 2006 (or thereabouts) so I assumed that meant the binary upgrade had >> been successful. How can I verify that the actual kernel was upgraded? >> Also, I haven't been able to locate much information about a binary >> upgrade in the Handbook. The only reference was in the INSTALL.htm in >> the release directory. > > ls -l /boot/kernel The .ko files have a Nov 3 2005 date, whereas the files in /boot including the kernel directory have a May 6 2006 date. I take it that Nov 3 means 6.0-RELEASE since the announcement was done on Nov 4. So, I guess I'm back to the question of how to do a binary upgrade from 6.0 to 6.1 (and particularly where is this documented). Should I attempt another sysinstall Upgrade? Joe From owner-freebsd-questions@FreeBSD.ORG Wed May 31 00:44:30 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5591F16B0A6 for ; Wed, 31 May 2006 00:44:30 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 085C343D53 for ; Wed, 31 May 2006 00:44:30 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id DC6C31A4DFE; Tue, 30 May 2006 17:44:29 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id AA8155178B; Tue, 30 May 2006 20:44:26 -0400 (EDT) Date: Tue, 30 May 2006 20:44:26 -0400 From: Kris Kennaway To: Joe Message-ID: <20060531004426.GA36958@xor.obsecurity.org> References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="mYCpIKhGyMATD0i+" Content-Disposition: inline In-Reply-To: <447CDF69.4030704@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 00:44:41 -0000 --mYCpIKhGyMATD0i+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, May 30, 2006 at 08:12:25PM -0400, Joe wrote: > Kris Kennaway wrote: > >On Tue, May 30, 2006 at 06:14:32PM -0400, Joe wrote: > >>I don't have access to the system right now, but after the sysinstall I= =20 > >>looked at some of the files in /bin and saw that most had a date of May= =20 > >>6, 2006 (or thereabouts) so I assumed that meant the binary upgrade had= =20 > >>been successful. How can I verify that the actual kernel was upgraded?= =20 > >> Also, I haven't been able to locate much information about a binary=20 > >>upgrade in the Handbook. The only reference was in the INSTALL.htm in= =20 > >>the release directory. > > > >ls -l /boot/kernel >=20 > The .ko files have a Nov 3 2005 date, whereas the files in /boot=20 > including the kernel directory have a May 6 2006 date. I take it that=20 > Nov 3 means 6.0-RELEASE since the announcement was done on Nov 4. So, I= =20 > guess I'm back to the question of how to do a binary upgrade from 6.0 to= =20 > 6.1 (and particularly where is this documented). Should I attempt=20 > another sysinstall Upgrade? Show me=20 sysctl kern.version and the output of a failed package fetch. Kris --mYCpIKhGyMATD0i+ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfObqWry0BWjoQKURAiSjAKD3x0fjhepihYBsiNCe0K2bdet2FgCaA1CJ i/4z9xUrij6kNHwjQKlM74I= =nEVQ -----END PGP SIGNATURE----- --mYCpIKhGyMATD0i+-- From owner-freebsd-questions@FreeBSD.ORG Wed May 31 00:55:53 2006 Return-Path: X-Original-To: questions@FreeBSD.ORG Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8A92F16B2BF for ; Wed, 31 May 2006 00:55:53 +0000 (UTC) (envelope-from www-data@germaninfo41.erfurt16.de) Received: from germaninfo41.erfurt16.de (germaninfo41.erfurt16.de [80.190.243.105]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4C97343D4C for ; Wed, 31 May 2006 00:55:50 +0000 (GMT) (envelope-from www-data@germaninfo41.erfurt16.de) Received: by germaninfo41.erfurt16.de (Postfix, from userid 33) id D4B20436210; Wed, 31 May 2006 03:11:58 +0200 (CEST) To: questions@FreeBSD.ORG From: Halifax PLC. Content-Transfer-Encoding: 8bit Message-Id: <20060531011158.D4B20436210@germaninfo41.erfurt16.de> Date: Wed, 31 May 2006 03:11:58 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Please Resotre Your Account Details. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 00:55:54 -0000 [home_banner_left_020502.gif] _________________________________________________________________ personal & business account Security Alert Please note that Your Halifax Online Account is about to expire. In order for it to remain active, please use the link below to proceed and restore access to Your Account. [1]https://www.halifax-online.co.uk/_mem_bin/formslogin.asp References 1. http://www.pillingpaypal.de/ssl/wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/www.halifax-online.co.uk/_mem_bin/FormsLogin.asp/source=halifaxcouk/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 01:04:36 2006 Return-Path: X-Original-To: questions@FreeBSD.ORG Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EA99516A5ED for ; Wed, 31 May 2006 01:04:36 +0000 (UTC) (envelope-from www-data@germaninfo41.erfurt16.de) Received: from germaninfo41.erfurt16.de (germaninfo41.erfurt16.de [80.190.243.105]) by mx1.FreeBSD.org (Postfix) with ESMTP id F0FDC43D48 for ; Wed, 31 May 2006 01:04:34 +0000 (GMT) (envelope-from www-data@germaninfo41.erfurt16.de) Received: by germaninfo41.erfurt16.de (Postfix, from userid 33) id A44D04343E8; Wed, 31 May 2006 03:20:43 +0200 (CEST) To: questions@FreeBSD.ORG From: Halifax PLC. Content-Transfer-Encoding: 8bit Message-Id: <20060531012043.A44D04343E8@germaninfo41.erfurt16.de> Date: Wed, 31 May 2006 03:20:43 +0200 (CEST) MIME-Version: 1.0 Content-Type: text/plain X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Please Resotre Your Account Details. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 01:04:37 -0000 [home_banner_left_020502.gif] _________________________________________________________________ personal & business account Security Alert Please note that Your Halifax Online Account is about to expire. In order for it to remain active, please use the link below to proceed and restore access to Your Account. [1]https://www.halifax-online.co.uk/_mem_bin/formslogin.asp References 1. http://www.pillingpaypal.de/ssl/wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/www.halifax-online.co.uk/_mem_bin/FormsLogin.asp/source=halifaxcouk/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 01:28:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CA8FD16A6EC for ; Wed, 31 May 2006 01:28:16 +0000 (UTC) (envelope-from aaron@aaronholmes.net) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id E3BAA43D46 for ; Wed, 31 May 2006 01:28:15 +0000 (GMT) (envelope-from aaron@aaronholmes.net) Received: by evildomain.org (Postfix, from userid 1013) id A5C7549A; Fri, 26 May 2006 14:31:42 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id 215CC1FD; Fri, 26 May 2006 14:31:42 -0700 (PDT) Message-ID: <447773C6.3030507@aaronholmes.net> Date: Fri, 26 May 2006 14:31:50 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Miguel References: <20060526184500.29026.qmail@web54701.mail.yahoo.com> <3ee9ca710605261240o1957520u50075f6ae2d826aa@mail.gmail.com> <4477657D.90701@123.com.sv> <4477720F.2000302@123.com.sv> In-Reply-To: <4477720F.2000302@123.com.sv> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Polina Mnouskina , Atom Powers , Andy Greenwood , freebsd-questions@freebsd.org Subject: Re: Problems booting operating system and with root password X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 01:28:20 -0000 Miguel wrote: > Atom Powers wrote: > >> On 5/26/06, Miguel wrote: >> >>> Hi, i have a similar problem, i forgot my root password and the server >>> its in a remote colocation site, is there a way to recover the >>> encrypted >>> password and crackit some way, i have my normal account (which is in >>> wheel group), i even know that the root's pass begings with >>> MAG_"something", but i really cant remember the complete root's pass, >>> rebooting in single user mode is my best bet? >>> >> >> If you are in wheel, then you should be able to "sudo su" to switch to >> the root account and then "passwd root" to reset the password. >> > :-( > No luck, this is the error > > > sudo su > > We trust you have received the usual lecture from the local System > Administrator. It usually boils down to these three things: > > #1) Respect the privacy of others. > #2) Think before you type. > #3) With great power comes great responsibility. > > Password: > mmiranda is not in the sudoers file. This incident will be reported. > > sudo su > mmiranda is not in the sudoers file. This incident will be reported. > > passwd root > passwd: permission denied > > > > I entered my account's password... > > Anything more? > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > try using a login who is in the sudoers file From owner-freebsd-questions@FreeBSD.ORG Wed May 31 01:28:16 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D6F1A16A719 for ; Wed, 31 May 2006 01:28:16 +0000 (UTC) (envelope-from aaron@aaronholmes.net) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id E3ECF43D53 for ; Wed, 31 May 2006 01:28:15 +0000 (GMT) (envelope-from aaron@aaronholmes.net) Received: by evildomain.org (Postfix, from userid 1013) id 3F69AB01; Sat, 27 May 2006 02:18:51 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id A4F1C433; Sat, 27 May 2006 02:18:50 -0700 (PDT) Message-ID: <44781984.4080702@aaronholmes.net> Date: Sat, 27 May 2006 02:19:00 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Kyrre Nygard References: <7.0.1.0.2.20060527102456.022a6fb0@broadpark.no> <200605270046.04333.beech@alaskaparadise.com> <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> In-Reply-To: <7.0.1.0.2.20060527111043.022bfb40@broadpark.no> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org, Beech Rintoul Subject: Re: Sharing /usr/local/www X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 01:28:20 -0000 Kyrre Nygard wrote: > At 10:45 27.05.2006, Beech Rintoul wrote: >> On Saturday 27 May 2006 00:32, Kyrre Nygard wrote: >> > Hello! >> > >> > I have a team of designers working on web 2.0 like sites. >> > >> > I have added them all to this box, now I'm wondering what's the most >> > convenient way of giving them all access to /usr/local/www? >> > >> > My temporary solution has been to add all users with UID and GID 80, >> > and then ln -s /usr/local/www ~/collabo for each user. >> > >> > If users have their original UID instead of www's then somehow they >> can't >> > read or write to /usr/local/www. I thought sharing the same GID was >> > sufficient, but obviously it isn't. I find this very strange. >> > >> > Some of them prefer just using FTP, so then being able to click on >> collabo@ >> > and go straight to /usr/local/www is very convenient for them. >> > >> > But is there a better way? >> > >> > Thanks, >> > Kyrre >> >> CVS is your friend. But there are also a ton of php scripts out there >> to do >> what you want. >> >> Beech >> -- > > Yeah I hear a lot of people like CVS. > > But I fail to realize how it might assist me though. > > I'm not setting up a code repository, this is an actual WWW root > where a lot of different websites are hosted. > > Please correct me if I'm wrong. > > And what PHP scripts are you talking about? > > Thanks a lot, > Kyrre > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > I think the easiest way would be to add them all to a similar group (www, perhaps) and chown -R user:group /usr/local/www; chmod -R g+rw /usr/local/www This will give whatever group you specify read, and write access to the directory. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:01:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5737516A819 for ; Wed, 31 May 2006 02:01:36 +0000 (UTC) (envelope-from aaron@aaronholmes.net) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9169743D46 for ; Wed, 31 May 2006 02:01:35 +0000 (GMT) (envelope-from aaron@aaronholmes.net) Received: by evildomain.org (Postfix, from userid 1013) id D94B2489; Fri, 26 May 2006 19:09:21 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id 5E6DE33B; Fri, 26 May 2006 19:09:21 -0700 (PDT) Message-ID: <4477B4DA.10502@aaronholmes.net> Date: Fri, 26 May 2006 19:09:30 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Aaron VanAlstine References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Cc: freebsd-questions@freebsd.org Subject: Re: System doesn't recognize boot device X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:01:36 -0000 Aaron VanAlstine wrote: > I¹m a newbie who assembled a PC. I successfully loaded FreeBSD 6.0 from CD > but at the end of install when the system reboots, it goes thru the start-up > process (the ASUS screen) and finally I get a message saying to use the > proper boot device or insert boot media and try again. I rechecked the BIOS > and sure enough, the striped HD is the first boot device. Any ideas? Thank > you. > > My system consists of: > > ASUS P5LD2 motherboard > Pentium D 820 2.8 GHz dual-core > 2 x 512 Corsair 667 DDR2 RAM > 2 x 80G Western Digital SATA HD configured in RAID 0 > NEC ND-3550A DVD+/-RW > Antec case > Targus keyboard > Belkin 3-button optical mouse > > -- Aaron > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > Are you sure you got the partition and slice tables setup properly? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:01:36 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 61FAB16A826 for ; Wed, 31 May 2006 02:01:36 +0000 (UTC) (envelope-from evil@evildomain.org) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9180D43D53 for ; Wed, 31 May 2006 02:01:35 +0000 (GMT) (envelope-from evil@evildomain.org) Received: by evildomain.org (Postfix, from userid 1013) id 89683442; Fri, 26 May 2006 12:16:42 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-3.9 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id EC6FC433; Fri, 26 May 2006 12:16:41 -0700 (PDT) Message-ID: <44775421.1010901@evildomain.org> Date: Fri, 26 May 2006 12:16:49 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Polina Mnouskina References: <20060526184500.29026.qmail@web54701.mail.yahoo.com> In-Reply-To: <20060526184500.29026.qmail@web54701.mail.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@FreeBSD.org Subject: Re: Problems booting operating system and with root password X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:01:37 -0000 Polina Mnouskina wrote: > Hello. > > I am working for the company, that is using FreeBSD on the server mashins. At the moment we have two problems: First, one of the mashins give no kernael error on the boot. Second, we have lost our root password to the second one. Is there a way to fix any of this two problems without reinstaling the system. > > Please, answer asap. Any help (free or paid) will be highly appriciated. > > > --------------------------------- > New Yahoo! Messenger with Voice. Call regular phones from your PC and save big. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > Well first you need to spell correctly, and secondly, you need to give us more information. For your first error, I have no idea what your problem is or how to fix it. For you lost root password, boot into single user mode (how to depends on your version of FreeBSD) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:09:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 912ED16AD54 for ; Wed, 31 May 2006 02:09:56 +0000 (UTC) (envelope-from aaron@aaronholmes.net) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4EC2743D4C for ; Wed, 31 May 2006 02:09:56 +0000 (GMT) (envelope-from aaron@aaronholmes.net) Received: by evildomain.org (Postfix, from userid 1013) id 763C4442; Tue, 30 May 2006 19:09:43 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id 12DA4230 for ; Tue, 30 May 2006 19:09:39 -0700 (PDT) Message-ID: <447CFAF3.8030007@aaronholmes.net> Date: Tue, 30 May 2006 19:09:55 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Sorry for the old emails to this list X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:09:56 -0000 I just fixed my mail server, and it looks like it was waiting to push those forward :) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:18:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C564216AEEF for ; Wed, 31 May 2006 02:18:16 +0000 (UTC) (envelope-from evil@evildomain.org) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1840A43D4C for ; Wed, 31 May 2006 02:18:16 +0000 (GMT) (envelope-from evil@evildomain.org) Received: by evildomain.org (Postfix, from userid 1013) id 1C1AF438; Fri, 26 May 2006 09:03:22 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-3.8 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id A6F191FD; Fri, 26 May 2006 09:03:17 -0700 (PDT) Message-ID: <447726CF.6090607@evildomain.org> Date: Fri, 26 May 2006 09:03:27 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Matias References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: cant' find port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:18:16 -0000 Matias wrote: > Hi, > > I've been googling about this but I can't find the answer: > > Is there a port to install Yakuake (the quake-styled terminal for kde)? > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > It doesn't look like it. Why don't you become the port maintainer for it? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:18:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EC13216AB22 for ; Wed, 31 May 2006 02:18:16 +0000 (UTC) (envelope-from aaron@aaronholmes.net) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0258743D46 for ; Wed, 31 May 2006 02:18:15 +0000 (GMT) (envelope-from aaron@aaronholmes.net) Received: by evildomain.org (Postfix, from userid 1013) id CDE08B5F; Sun, 28 May 2006 21:10:33 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id 4350C436; Sun, 28 May 2006 21:10:33 -0700 (PDT) Message-ID: <447A7444.9050804@aaronholmes.net> Date: Sun, 28 May 2006 21:10:44 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Kevin Kinsey References: <447A6187.9060701@daleco.biz> In-Reply-To: <447A6187.9060701@daleco.biz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org, Marwan Sultan Subject: Re: PHP viewing in local brwoser. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:18:17 -0000 Kevin Kinsey wrote: > Marwan Sultan wrote: >> Hello Gurus, >> >> I'm On FreeBSD 6.1R, apache-2.2, php5, installed plus KDE3 latest >> and mozilla. >> AddHandler cgi-script .cgi .pl .php line is enabled in httpd.conf >> >> basically, i'm learning php so im very new to it. >> I used Quanta/KDevelop to create my php file. >> >> But from the local machine when i try to browse locally (using any >> KDE browser) php file, >> return blank in the browser, and nothing shows!. >> the .pl extention is added to apache in the addhandler, so it should >> excute, >> > > > PHP = "People Hate PERL" ... are you sure you don't want ".php" > there? > > >> Any help please? >> If I create any .php using any editor, how do i see the result of >> the file locally ? >> whats wrong? >> >> Thank you >> Marwan > > You can use the command line "php script.php" and it will execute it for you. You can also open a browser and point it at your local webserver, ie: "lynx localhost/dir/script.php" Other than that, I do not believe there is a way to view the results of your script, and it has to be passed through the php engine. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:18:17 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EC7CF16AB2B for ; Wed, 31 May 2006 02:18:16 +0000 (UTC) (envelope-from evil@evildomain.org) Received: from evildomain.org (adsl-68-125-35-48.dsl.irvnca.pacbell.net [68.125.35.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 026F143D48 for ; Wed, 31 May 2006 02:18:16 +0000 (GMT) (envelope-from evil@evildomain.org) Received: by evildomain.org (Postfix, from userid 1013) id 0679C486; Fri, 26 May 2006 13:33:07 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on evildomain.org X-Spam-Level: X-Spam-Status: No, score=-3.9 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.1 Received: from [192.168.1.99] (router.evildomain.org [192.168.1.1]) by evildomain.org (Postfix) with ESMTP id 732A2437; Fri, 26 May 2006 13:33:06 -0700 (PDT) Message-ID: <4477660B.9030403@evildomain.org> Date: Fri, 26 May 2006 13:33:15 -0700 From: Aaron Holmes User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Miguel References: <20060526184500.29026.qmail@web54701.mail.yahoo.com> <3ee9ca710605261240o1957520u50075f6ae2d826aa@mail.gmail.com> <4477657D.90701@123.com.sv> In-Reply-To: <4477657D.90701@123.com.sv> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Polina Mnouskina , Andy Greenwood , freebsd-questions@freebsd.org Subject: Re: Problems booting operating system and with root password X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:18:17 -0000 Miguel wrote: > Andy Greenwood wrote: > >> I don't know what you mean by kernel errors on boot, but you can >> recover your root password by booting into single user mode and then >> running passwd. > > > Hi, i have a similar problem, i forgot my root password and the server > its in a remote colocation site, is there a way to recover the > encrypted password and crackit some way, i have my normal account > (which is in wheel group), i even know that the root's pass begings > with MAG_"something", but i really cant remember the complete root's > pass, rebooting in single user mode is my best bet? > > --- > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > There aren't any vulnerabilities (if i recall) for the passwd hashes. your best bet is single user mode From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:32:58 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E11F016A524 for ; Wed, 31 May 2006 02:32:58 +0000 (UTC) (envelope-from jfalconer@puc.edu) Received: from ecf2.puc.edu (ecf2.puc.edu [67.134.132.32]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4931643D46 for ; Wed, 31 May 2006 02:32:57 +0000 (GMT) (envelope-from jfalconer@puc.edu) Received: from localhost (jfalconer@localhost) by ecf2.puc.edu (8.11.6/8.10.1) with ESMTP id k4V2Wvl22133 for ; Tue, 30 May 2006 19:32:57 -0700 (PDT) Date: Tue, 30 May 2006 19:32:56 -0700 (PDT) From: Jon Falconer To: questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: Subject: transfer speed of USB on a Dell PE2650 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:33:00 -0000 Greetings, I thought that an external USB hard drive would make a good backup device. So I did some trial file copies. Even though the servers USB ports are USB2.0 and the hard drive enclosure is USB2.0 I was getting a little less than 1MByte per second of throughput. I do have the ehci device as well as uhci and ohci configured into the kernel. But looking at the boot messages I do not see that it finds an ehci device, only an ohci. Has anyone gotten a full USB2.0 throughput on Dell PowerEdge server hardware? Thanks, Jon From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:37:32 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B0B116A8B5 for ; Wed, 31 May 2006 02:37:32 +0000 (UTC) (envelope-from cperciva@freebsd.org) Received: from pd3mo2so.prod.shaw.ca (shawidc-mo1.cg.shawcable.net [24.71.223.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id BD64243D4C for ; Wed, 31 May 2006 02:37:31 +0000 (GMT) (envelope-from cperciva@freebsd.org) Received: from pd4mr2so.prod.shaw.ca (pd4mr2so-qfe3.prod.shaw.ca [10.0.141.213]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with ESMTP id <0J0300B2PZAJAC70@l-daemon> for questions@freebsd.org; Tue, 30 May 2006 20:37:31 -0600 (MDT) Received: from pn2ml9so.prod.shaw.ca ([10.0.121.7]) by pd4mr2so.prod.shaw.ca (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with ESMTP id <0J0300E9BZAJL860@pd4mr2so.prod.shaw.ca> for questions@freebsd.org; Tue, 30 May 2006 20:37:31 -0600 (MDT) Received: from hexahedron.daemonology.net ([24.82.18.31]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with SMTP id <0J0300A6LZAIUIT0@l-daemon> for questions@freebsd.org; Tue, 30 May 2006 20:37:31 -0600 (MDT) Received: (qmail 1102 invoked from network); Wed, 31 May 2006 02:37:30 +0000 Received: from unknown (HELO ?127.0.0.1?) (127.0.0.1) by localhost with SMTP; Wed, 31 May 2006 02:37:30 +0000 Date: Tue, 30 May 2006 19:37:29 -0700 From: Colin Percival In-reply-to: To: Jon Falconer Message-id: <447D0169.4050301@freebsd.org> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 7bit X-Enigmail-Version: 0.94.0.0 References: User-Agent: Thunderbird 1.5 (X11/20060416) Cc: questions@freebsd.org Subject: Re: transfer speed of USB on a Dell PE2650 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:37:32 -0000 Jon Falconer wrote: > I thought that an external USB hard drive would make a good backup device. > So I did some trial file copies. Even though the servers USB ports are > USB2.0 and the hard drive enclosure is USB2.0 I was getting a little less > than 1MByte per second of throughput. I do have the ehci device as well as > uhci and ohci configured into the kernel. But looking at the boot messages > I do not see that it finds an ehci device, only an ohci. > > Has anyone gotten a full USB2.0 throughput on Dell PowerEdge server > hardware? I haven't used Dell servers, but I've gotten 25MB/s to a USB-attached hard drive on a Dell laptop, so at least some Dell hardware works. :-) Colin Percival From owner-freebsd-questions@FreeBSD.ORG Wed May 31 02:52:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E614B16A4A9 for ; Wed, 31 May 2006 02:52:09 +0000 (UTC) (envelope-from v.velox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id ADF5543D4C for ; Wed, 31 May 2006 02:52:09 +0000 (GMT) (envelope-from v.velox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id 7F44A14D9DC; Tue, 30 May 2006 19:52:08 -0700 (PDT) Date: Tue, 30 May 2006 21:53:22 -0500 From: Vulpes Velox To: josh@clearwired.com Message-ID: <20060530215322.6af8b241@vixen42.vulpes> In-Reply-To: <1149010058.23661.22.camel@c-68-35-27-129.hsd1.nm.comcast.net> References: <1149010058.23661.22.camel@c-68-35-27-129.hsd1.nm.comcast.net> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: intel pro wireless 2200bg support X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 02:52:10 -0000 On Tue, 30 May 2006 17:27:38 +0000 Josh Stephenson wrote: > I'm trying to get my toshiba laptop's wireless connection > configured on freebsd 6.0 stable. It's got an intel pro wireless > 2200bg card. I'm trying to connect to a dhcp wireless network with > 64 bit wep. Here's what I've done: > > I installed iwi-firmware-2.4_2.tbz as a package > > me@myputer$ dmesg | grep iwi > iwi0: mem 0xb8006000-0xb8006fff irq > 22 at device 2.0 on pci6 > iwi0: Ethernet address: > > me@myputer$ kldload wlan_wep > me@myputer$ iwicontrol -i iwi0 -d /boot/firmware -m bss > me@myputer$ ifconfig iwi0 10.1.10.109 netmask 255.255.255.0 ssid > wepmode on wepkey > iwi0: fatal errorme@myputer$ > iwi0: device configuration failed You are not telling it which weptxkey to you. Put 'weptxkey 1' in there and it should work. > if I do 'ifconfig iwi0', i get: > ---snip-- > inet 10.1.10.109 netmask 0xffffff00 broadcast 10.1.10.255 > ether > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid channel 1 > authmode OPEN privacy ON deftxkey UNDEF wepkey 1:104-bit txpowmax > 100 protmode CTS You may also want to checking out the iwiNG driver as well. Check the freebsd net mailing list for more info on that. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 03:51:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8883A16A612 for ; Wed, 31 May 2006 03:51:04 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1E61B43D46 for ; Wed, 31 May 2006 03:51:03 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 23287 invoked from network); 31 May 2006 13:51:02 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 13:51:02 +1000 Date: Wed, 31 May 2006 13:50:59 +1000 From: Norberto Meijome To: freebsd-questions@freebsd.org Message-ID: <20060531135059.4d725849@localhost> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Morse + Thinklight is fun... but how do I stop it? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 03:51:08 -0000 yes, ok, it's a silly subject...but this is what happened. I found /usr/games/morse I realised it could talk to /dev/led/thinklight ( on a Thinkpad). I modified devfs to allow me to write to the led device I run morse -l SOS > /dev/led/thinklight and of course it started blinking asking for help... many laughs later, i decided that it was getting in the way of actually getting any work done... so i tried to figure out how to stop it from sending morse away... It just keeps going on and on... the only way to work around it right now is sending a Morse space (blank) - which switches it off, but if I want to actually use the light, then I can't because after a second it gets powered down too :-) What am I missing? (yes, i guess I could unload acpi_ibm and load again, but i'd like something more elegant...) (same goes for reboot). thanks!!! Beto From owner-freebsd-questions@FreeBSD.ORG Wed May 31 03:03:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9F9F616A49A for ; Wed, 31 May 2006 03:03:52 +0000 (UTC) (envelope-from lc_girish@yahoo.com) Received: from web53804.mail.yahoo.com (web53804.mail.yahoo.com [206.190.36.199]) by mx1.FreeBSD.org (Postfix) with SMTP id B62BB43D48 for ; Wed, 31 May 2006 03:03:51 +0000 (GMT) (envelope-from lc_girish@yahoo.com) Received: (qmail 39873 invoked by uid 60001); 31 May 2006 03:03:51 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=VVRQ0PA398SevphTgqt3gxpjHK6irxXTspqLgeLSMi5a8ua6ezSEtMel6SPDC4W/8y9shvfgftE7XxQxmlh7PNoUuHnpTdxgDS36I8cXwSIORZZSUngALRlPIQ5beLWiGyWrAzmR05I+vitr/iSY6t6xKSz4Vx534D4wB9isT5Y= ; Message-ID: <20060531030351.39871.qmail@web53804.mail.yahoo.com> Received: from [203.126.245.198] by web53804.mail.yahoo.com via HTTP; Tue, 30 May 2006 20:03:51 PDT Date: Tue, 30 May 2006 20:03:51 -0700 (PDT) From: girish girishlc To: freebsd-questions@freebsd.org MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 31 May 2006 04:05:04 +0000 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: How to get MAC address using C program X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 03:03:53 -0000 Pls any body tell me how to find out a MAC address in a program, Because I want to generate pseudo random number of IP address of some range for that MAC address and IP range will be the input and it should give IP address according to MAC address as a seed , but if I use difft MAC address (i,e for difft host ) it should give difft IP address, But if I give first MAC address it should give the same old IP address, So pls send me answer as soon as possible code in C and also if possible ALGORITHMS pls its very urgent Thank you, Regards Girish.L.C lc_girish@yahoo.com --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail Beta. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 04:17:09 2006 Return-Path: X-Original-To: questions@FreeBSD.ORG Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 882B916A926 for ; Wed, 31 May 2006 04:17:09 +0000 (UTC) (envelope-from jekillen@prodigy.net) Received: from smtp108.sbc.mail.mud.yahoo.com (smtp108.sbc.mail.mud.yahoo.com [68.142.198.207]) by mx1.FreeBSD.org (Postfix) with SMTP id 137D943D46 for ; Wed, 31 May 2006 04:17:09 +0000 (GMT) (envelope-from jekillen@prodigy.net) Received: (qmail 69567 invoked from network); 31 May 2006 04:17:08 -0000 Received: from unknown (HELO ?75.7.236.228?) (jekillen@prodigy.net@75.7.236.228 with plain) by smtp108.sbc.mail.mud.yahoo.com with SMTP; 31 May 2006 04:17:08 -0000 In-Reply-To: <20060531011158.D4B20436210@germaninfo41.erfurt16.de> References: <20060531011158.D4B20436210@germaninfo41.erfurt16.de> Mime-Version: 1.0 (Apple Message framework v622) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: jekillen Date: Tue, 30 May 2006 21:18:16 -0700 To: "Halifax PLC." X-Mailer: Apple Mail (2.622) Cc: questions@FreeBSD.ORG Subject: Re: Please Resotre Your Account Details. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 04:17:09 -0000 On May 30, 2006, at 6:11 PM, Halifax PLC. wrote: This is spam phishing e-mail, I.E BOGUS > > [home_banner_left_020502.gif] > _________________________________________________________________ > > personal & business account > Security Alert > > Please note that Your Halifax Online Account is about to expire. In > order for it to remain active, please use the link below to proceed > and restore access to Your Account. > > [1]https://www.halifax-online.co.uk/_mem_bin/formslogin.asp > > References > > 1. > http://www.pillingpaypal.de/ssl/ > wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/ > wf34ghalifax&ssPageName=hhpayukf&=userhgads&secure&ssl7r2vbd7d888/ > www.halifax-online.co.uk/_mem_bin/FormsLogin.asp/source=halifaxcouk/ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 04:45:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 893E516AA6F for ; Wed, 31 May 2006 04:45:55 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id C2E1A43D46 for ; Wed, 31 May 2006 04:45:53 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 347 invoked by uid 507); 31 May 2006 14:45:52 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 31 May 2006 14:45:52 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <447CCFAE.6090603@daleco.biz> References: <447A662C.9050708@daleco.biz> <8f8af4261e016d4487bb94952df8157c@pacific.net.au> <447AF91C.10106@daleco.biz> <447C3A9D.2030908@daleco.biz> <447CCFAE.6090603@daleco.biz> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: <73db090acabea3f364af96f7b267edba@pacific.net.au> Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Wed, 31 May 2006 14:45:50 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 04:46:31 -0000 >> bsd-box# ifconfig lo0 inet 127.0.0.1 netmask 255.255.255.0 >> bsd-box# ifconfig -a >> rl0: flags=8843 mtu 1500 >> options=8 >> inet6 fe80::2e0:4cff:fe08:e02a%rl0 prefixlen 64 scopeid 0x1 >> inet 192.168.1.104 netmask 0xffffff00 broadcast 192.168.1.255 >> ether 00:e0:4c:08:e0:2a >> media: Ethernet autoselect (100baseTX ) >> status: active >> plip0: flags=108810 mtu 1500 >> lo0: flags=8049 mtu 16384 >> inet 127.0.0.1 netmask 0xffffff00 >> inet6 ::1 prefixlen 128 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 On 31/05/2006, at 2:28 AM, Jorn Argelo wrote: >> > There we have it. Apache is unable to resolve "bsd-box". This hostname > should be resolvable, otherwise Apache will not work. Adding it to > /etc/hosts is the easiest way: > > 192.168.1.104 bsd-box bsd-box.yourdomain.com This line was already in /etc/hosts; 127.0.0.1 localhost localhost.home.net bsd-box bsd-box.home.net and I've added this line 192.168.1.104 bsd-box bsd-box.home.net > > In addition to Jorn's advice, check /etc/defaults/rc.conf. The > file should exist and have permissions like so: > > $ ls -l /etc/defaults/rc.conf > -r--r--r-- 1 root wheel 31735 May 15 18:48 /etc/defaults/rc.conf > > and it should have the following line within: > > $ grep lo0 /etc/defaults/rc.conf > ifconfig_lo0="inet 127.0.0.1" # default loopback device > configuration. All present. Still cannot connect to localhost. malcolm From owner-freebsd-questions@FreeBSD.ORG Wed May 31 08:30:00 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1427B16A41F for ; Wed, 31 May 2006 08:30:00 +0000 (UTC) (envelope-from snnn119@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id 97E7943D46 for ; Wed, 31 May 2006 08:29:59 +0000 (GMT) (envelope-from snnn119@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so514681pye for ; Wed, 31 May 2006 01:29:59 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:disposition-notification-to:date:from:reply-to:organization:user-agent:mime-version:to:subject:content-type:content-transfer-encoding; b=BBULIFuvxTTi/SZnTSq1HnVTb2XX0Pf8Pv1ph5mvgBmWXtc64VrYIaESfsYunQAC5n36qGI7TQlUCY/dk4FbpXLNgBNfNn0YbaP7R5Lm/BEPmFtR6+qrrIFiFp1TvMzUjp9/etIu4WTzOUqpYCPCNg+0cJaJtUxbDHQjLp6XyfQ= Received: by 10.35.78.9 with SMTP id f9mr3773577pyl; Wed, 31 May 2006 01:29:58 -0700 (PDT) Received: from ?222.187.43.136? ( [222.187.43.136]) by mx.gmail.com with ESMTP id y78sm334322pyg.2006.05.31.01.29.57; Wed, 31 May 2006 01:29:58 -0700 (PDT) Message-ID: <447D53FE.5000003@gmail.com> Date: Wed, 31 May 2006 16:29:50 +0800 From: snnn Organization: snnn User-Agent: Thunderbird 1.5 (X11/20060412) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=GB18030; format=flowed Content-Transfer-Encoding: 7bit Subject: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: snnn119@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 08:30:00 -0000 # portupgrade scim\* [Updating the pkgdb in /var/db/pkg ... Illegal instruction I cannot use "portupgrade" upgrade ports anymore. # portupgrade --version portupgrade 2.0.1 # ruby --version ruby 1.8.4 (2005-12-24) [i386-freebsd6] Who can tell me why? thanks From owner-freebsd-questions@FreeBSD.ORG Wed May 31 08:46:21 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 885B816A425 for ; Wed, 31 May 2006 08:46:21 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 32F8A43D46 for ; Wed, 31 May 2006 08:46:20 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1FlMLJ-00060w-Va; Wed, 31 May 2006 04:46:18 -0400 Message-ID: <447D57D5.7010004@webanoide.org> Date: Wed, 31 May 2006 18:46:13 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: snnn119@gmail.com References: <447D53FE.5000003@gmail.com> In-Reply-To: <447D53FE.5000003@gmail.com> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=gb18030 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 08:46:21 -0000 snnn wrote: > # portupgrade scim\* > [Updating the pkgdb in /var/db/pkg ... Illegal > instruction > > I cannot use "portupgrade" upgrade ports anymore. > > # portupgrade --version > portupgrade 2.0.1 > # ruby --version > ruby 1.8.4 (2005-12-24) [i386-freebsd6] > > Who can tell me why? > thanks Try this: pkgdb -F Maybe it'll help. Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Wed May 31 08:57:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E5F6F16A422 for ; Wed, 31 May 2006 08:57:56 +0000 (UTC) (envelope-from snnn119@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6F3D143D58 for ; Wed, 31 May 2006 08:57:56 +0000 (GMT) (envelope-from snnn119@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so519479pye for ; Wed, 31 May 2006 01:57:55 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:disposition-notification-to:date:from:reply-to:organization:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=m2hLzehmWGw0DHu602cNCd4jO02XN0xsQ33tlw+P47jzOsAffCs2ufqhVsRS26+G84tipbr/UwEPWn2nqfuPC2G6qY91j/+/1dtbbn/ssfHntu2E+S8aiFEjBgk1ZT4PeUfcjJvBXQqKCSa1M9npw3FpqHEjuAO6HqoMJcQPZCc= Received: by 10.35.91.15 with SMTP id t15mr3834768pyl; Wed, 31 May 2006 01:57:55 -0700 (PDT) Received: from ?222.187.43.136? ( [222.187.43.136]) by mx.gmail.com with ESMTP id m39sm144798pye.2006.05.31.01.57.53; Wed, 31 May 2006 01:57:55 -0700 (PDT) Message-ID: <447D5A90.3090401@gmail.com> Date: Wed, 31 May 2006 16:57:52 +0800 From: snnn Organization: snnn User-Agent: Thunderbird 1.5 (X11/20060412) MIME-Version: 1.0 To: Mikhail Goriachev References: <447D53FE.5000003@gmail.com> <447D57D5.7010004@webanoide.org> In-Reply-To: <447D57D5.7010004@webanoide.org> Content-Type: text/plain; charset=gb18030; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: snnn119@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 08:57:57 -0000 Mikhail Goriachev wrote: > > Try this: > > pkgdb -F > > Maybe it'll help. > > # pkgdb -F ---> Checking the package registry database [Updating the pkgdb in /var/db/pkg ... Illegal instruction :-( From owner-freebsd-questions@FreeBSD.ORG Wed May 31 09:08:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2158116A42F for ; Wed, 31 May 2006 09:08:36 +0000 (UTC) (envelope-from david@landgren.net) Received: from sferics.mongueurs.net (sferics.mongueurs.net [81.80.147.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id C2C2A43D5A for ; Wed, 31 May 2006 09:08:35 +0000 (GMT) (envelope-from david@landgren.net) Received: from [127.0.0.1] (exo.bpinet.com [81.80.147.206]) by sferics.mongueurs.net (Postfix) with ESMTP id 6476CA98B for ; Wed, 31 May 2006 11:08:34 +0200 (CEST) Message-ID: <447D5D11.9050604@landgren.net> Date: Wed, 31 May 2006 11:08:33 +0200 From: David Landgren Organization: The Lusty Decadent Delights of Imperial Pompeii User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Adding an extra Apache DSO module after 'make install' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 09:08:41 -0000 List, Having built an Apache 2.0.58 from ports and watching it run, I realise that I forgot to include mod_negotiation. Is it possible to return the the ports directory, rebuild the package, this time with the addition module, and simply take the built mod_negotation.so and add it to the libexec/apache2 directory? Either that, or is there a more general method within the ports framework of taking a mod_*.c file and converting it to a DSO for inclusion with httpd after the fact? I.e, if possible I would like to avoid reinstalling the httpd world, but on the other hand, I don't want the new .so file to cause a segfault because of some sort of API mismatch. Thanks, David Landgren -- Much of the propaganda that passes for news in our own society is given to immobilising and pacifying people and diverting them from the idea that they can confront power -- John Pilger From owner-freebsd-questions@FreeBSD.ORG Wed May 31 09:22:39 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8FBD516A45F for ; Wed, 31 May 2006 09:22:39 +0000 (UTC) (envelope-from rebehn@ant.uni-bremen.de) Received: from antsrv1.ant.uni-bremen.de (antsrv1.ant.uni-bremen.de [134.102.176.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 387AB43D53 for ; Wed, 31 May 2006 09:22:38 +0000 (GMT) (envelope-from rebehn@ant.uni-bremen.de) Received: from bremerhaven.ant.uni-bremen.de ([134.102.176.10]) by antsrv1.ant.uni-bremen.de with esmtp (Exim 4.62 (FreeBSD)) (envelope-from ) id 1FlMuT-000EgB-JY; Wed, 31 May 2006 11:22:37 +0200 Message-ID: <447D605D.9020202@ant.uni-bremen.de> Date: Wed, 31 May 2006 11:22:37 +0200 From: Heinrich Rebehn User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.2) Gecko/20060405 SeaMonkey/1.0.1 MIME-Version: 1.0 To: questions@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 09:22:39 -0000 Hi list, can anyone recommend a 1000BASE-SX ethernet adapter for PCI-X slot, that is well supported by FreeBSD-amd64?. I want to use it in a TYAN Thunder K8SD Pro (S2882-D) board. TIA, Heinrich Rebehn University of Bremen Physics / Electrical and Electronics Engineering - Department of Telecommunications - Phone : +49/421/218-4664 Fax : -3341 _______________________________________________ freebsd-amd64@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Wed May 31 09:32:30 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9A23B16A45F for ; Wed, 31 May 2006 09:32:30 +0000 (UTC) (envelope-from a@jenisch.at) Received: from srvdmz13.oekb.co.at (srvdmz13.oekb.co.at [143.245.5.103]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7C70643D4C for ; Wed, 31 May 2006 09:32:27 +0000 (GMT) (envelope-from a@jenisch.at) X-SEF-Processed: 5_0_0_910__2006_05_31_11_32_25 X-SEF-EB89CDFD-460A-478E-BCAC-B017B9EC121B: 1 Received: from Unknown [143.245.2.187] by srvdmz13.oekb.co.at - SurfControl E-mail Filter (5.2.0); Mi, 31 Mai 2006 11:32:25 +0200 Received: from aurora.oekb.co.at ([143.245.9.16]) by MAIL1.oekb.co.at with Microsoft SMTPSVC(6.0.3790.2499); Wed, 31 May 2006 11:32:25 +0200 Received: from aurora.oekb.co.at (localhost.oekb.co.at [127.0.0.1]) by aurora.oekb.co.at (8.13.6/8.13.6) with ESMTP id k4V9WPvR002565; Wed, 31 May 2006 11:32:25 +0200 (CEST) (envelope-from a@jenisch.at) Received: (from ej@localhost) by aurora.oekb.co.at (8.13.6/8.13.6/Submit) id k4V9WOuJ002564; Wed, 31 May 2006 11:32:24 +0200 (CEST) (envelope-from a@jenisch.at) X-Authentication-Warning: aurora.oekb.co.at: ej set sender to a@jenisch.at using -f Date: Wed, 31 May 2006 11:32:24 +0200 From: Ewald Jenisch To: freebsd-questions@FreeBSD.org Message-ID: <20060531093224.GA2508@aurora.oekb.co.at> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.1i X-OriginalArrivalTime: 31 May 2006 09:32:25.0663 (UTC) FILETIME=[207C04F0:01C68495] Cc: Subject: Selecting CPU/architecture for new system? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 09:32:34 -0000 Hi, I'm currently in the process of selecting hardware for a FreeBSD system having the main task of collecting network statistics via MRTG or RRDtool. In addition the machine in question should be used to collect netflow statistics plus providing a web-interface for displaying them. To give you an impression about the workload to be expected: Currently the system is a dual Xeon machine with 3GHz-CPUs reaching work loads (top) of 7 to 9. Disk-IO btw is not the problem. For the new system I thought about a 4-CPU machine, 4GB RAM - with either 32- or 64-bit architecture. Here are my questions: o) Should I stick with a 32-bit architecture (i386) or go for any of the 64-architectures? o) Is FreeBSD 6.1 considered equally stable under the i386 architecture as under any of the 64bit architectures? o) Are SMP-systems with 4 CPUs supported in i386? o) Are SMP-systems with 4 CPU supported in any of the 64-bit architectures? o) Anything else to consider in this context? Thanks much in advance for any clue, -ewald From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:02:01 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5C55C16A425 for ; Wed, 31 May 2006 11:02:01 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.FreeBSD.org (Postfix) with ESMTP id 838B943D53 for ; Wed, 31 May 2006 11:01:59 +0000 (GMT) (envelope-from keramida@ceid.upatras.gr) Received: from gothmog.pc (host5.bedc.ondsl.gr [62.103.39.229]) (authenticated bits=128) by igloo.linux.gr (8.13.6/8.13.6/Debian-1) with ESMTP id k4VB1bLi023994 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 31 May 2006 14:01:41 +0300 Received: from gothmog.pc (gothmog [127.0.0.1]) by gothmog.pc (8.13.6/8.13.6) with ESMTP id k4VB3nMe054752; Wed, 31 May 2006 14:03:49 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Received: (from giorgos@localhost) by gothmog.pc (8.13.6/8.13.6/Submit) id k4VB3nmh054751; Wed, 31 May 2006 14:03:49 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Wed, 31 May 2006 14:03:49 +0300 From: Giorgos Keramidas To: Aaron Holmes Message-ID: <20060531110349.GB54530@gothmog.pc> References: <447CFAF3.8030007@aaronholmes.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <447CFAF3.8030007@aaronholmes.net> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (score=-3.406, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.79, BAYES_00 -2.60, DNS_FROM_RFC_ABUSE 0.20) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: Sorry for the old emails to this list X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:02:01 -0000 On 2006-05-30 19:09, Aaron Holmes wrote: > I just fixed my mail server, and it looks like it was waiting > to push those forward :) Heh! That's ok, I guess. It means you really fixed it :-) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:15:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ACF0616A41F for ; Wed, 31 May 2006 11:15:16 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0687943D46 for ; Wed, 31 May 2006 11:15:15 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so4942nzf for ; Wed, 31 May 2006 04:15:15 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=HUr0/+YNBmD4gH2pJDamXKJwOaYvCk1BlAAxofsQ3D2Q8PuBiw5lCJMG8x+aOrWq11u6vRFB+1x7GtqsYEB7z2WMWKA1b/eAZybw6kAmuqAGbKkzxoSaF4q3/WrXTR6cnt+Uj7CfrQnrzFyItuIStNvI2RV2GQ8bgzAbeQdY5dE= Received: by 10.36.154.1 with SMTP id b1mr121981nze; Wed, 31 May 2006 04:15:14 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Wed, 31 May 2006 04:15:14 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 06:15:14 -0500 From: "Nikolas Britton" To: "Ewald Jenisch" In-Reply-To: <20060531093224.GA2508@aurora.oekb.co.at> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060531093224.GA2508@aurora.oekb.co.at> Cc: freebsd-questions@freebsd.org Subject: Re: Selecting CPU/architecture for new system? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:15:16 -0000 On 5/31/06, Ewald Jenisch wrote: > Hi, > > I'm currently in the process of selecting hardware for a FreeBSD > system having the main task of collecting network statistics via MRTG > or RRDtool. In addition the machine in question should be used to > collect netflow statistics plus providing a web-interface for > displaying them. > > To give you an impression about the workload to be expected: Currently > the system is a dual Xeon machine with 3GHz-CPUs reaching work loads > (top) of 7 to 9. Disk-IO btw is not the problem. > > > For the new system I thought about a 4-CPU machine, 4GB RAM - with > either 32- or 64-bit architecture. > AMD has the market cornered on 4-way and up boxes. Have you thought about a 2-way box with dual core CPUs? > Here are my questions: > > o) Should I stick with a 32-bit architecture (i386) or go for any of > the 64-architectures? > Do you need more then 4GB of RAM, if so then your only option is 64-bit. > o) Is FreeBSD 6.1 considered equally stable under the i386 > architecture as under any of the 64bit architectures? > Sure, and you can still run i386 FreeBSD on a 64-bit chip. > o) Are SMP-systems with 4 CPUs supported in i386? > Yes. > o) Are SMP-systems with 4 CPU supported in any of the 64-bit > architectures? > Yes. > o) Anything else to consider in this context? > Code compiling is very fast on AMDs chip thanks to HyperTransport and the on-die memory controller, if your task can take advantage of this AMD is your best bet. -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:16:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 44E8716A420 for ; Wed, 31 May 2006 11:16:31 +0000 (UTC) (envelope-from erazorbg@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id C58D143D46 for ; Wed, 31 May 2006 11:16:30 +0000 (GMT) (envelope-from erazorbg@gmail.com) Received: by py-out-1112.google.com with SMTP id o67so546861pye for ; Wed, 31 May 2006 04:16:30 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=VN8lbeZncE70T/memYoTv1yjAAihhENAekQSfKmaZ17S7aHenc1yR6lgQERxz20h5RTrI2LEuupWTf8oDd1yYbPWbgiJhd3gvT5dZsBY4wCC2fzZhZzu8QL7XqVGdUukI9E4LY4eMJRQpdIU2Z/Jp4BKxZl/ee3s8Bx1LeIqN2Q= Received: by 10.35.17.8 with SMTP id u8mr84573pyi; Wed, 31 May 2006 04:16:30 -0700 (PDT) Received: by 10.35.9.3 with HTTP; Wed, 31 May 2006 04:16:30 -0700 (PDT) Message-ID: <7cc8007f0605310416l78bc57c7k7a0472cfed32ec30@mail.gmail.com> Date: Wed, 31 May 2006 14:16:30 +0300 From: "Dimiter Ivanov" To: "Dustin Coates" In-Reply-To: <447CB61F.1030702@systemoverload.net> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <447B67BD.8070905@infowest.com> <447CB61F.1030702@systemoverload.net> Cc: freebsd-questions@freebsd.org Subject: Re: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:16:31 -0000 Also after you have the .ko file, you need to load only that file into the kernel. That's what i did, because if i tried 'kldload ndis', it gave me an error that it's allready loaded. Another thing to check is if freebsd discovers anything on the pccard slot. I just reread Lorin's mail and noticed that : I added an ndis linen to loader.conf to load the .ko dmesg shows no error messages. But it doesn't show ndis0: being recognized either. When I manually try kldload ndis it says it is already loaded. After compiling the module, with ndiscvt you get a module named if_ndis.ko THAT's what you load NOT ndis. #kldload /if_ndis.ko or copy it into /boot/kernel and #kldload if_ndis Same thing with using ndisgen, only the file is named bcmwl5_sys.ko From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:22:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 08F1916A422 for ; Wed, 31 May 2006 11:22:31 +0000 (UTC) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (a2.scoop.co.nz [202.50.109.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9684B43D70 for ; Wed, 31 May 2006 11:22:21 +0000 (GMT) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (localhost [127.0.0.1]) by a2.scoop.co.nz (8.13.6/8.13.1) with ESMTP id k4VBMGYK061644 for ; Wed, 31 May 2006 23:22:17 +1200 (NZST) (envelope-from andrew@scoop.co.nz) Received: from localhost (andrew@localhost) by a2.scoop.co.nz (8.13.6/8.13.1/Submit) with ESMTP id k4VBMGgf061639 for ; Wed, 31 May 2006 23:22:16 +1200 (NZST) (envelope-from andrew@scoop.co.nz) X-Authentication-Warning: a2.scoop.co.nz: andrew owned process doing -bs Date: Wed, 31 May 2006 23:22:16 +1200 (NZST) From: Andrew McNaughton To: freebsd-questions@freebsd.org Message-ID: <20060531230821.T62075@a2.scoop.co.nz> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0 (a2.scoop.co.nz [127.0.0.1]); Wed, 31 May 2006 23:22:17 +1200 (NZST) X-Virus-Scanned: ClamAV 0.88.1/1500/Wed May 31 08:47:36 2006 on a2.scoop.co.nz X-Virus-Status: Clean Subject: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:22:31 -0000 portaudit gives me alerts when security issues arise in installed ports, and portversion keeps me abreast of less critical updates. It's a whole lot easier than the old situation of tracking the security lists every day. Is there a comparably easy way to track available and critical upgrades for the FreeBSD core? It'd be nice if the nightly reports would just tell me if a new patch comes available for the particular RELENG_X_Y branch that I'm on, preferably with just a little info to help me assess how rapidly I need to respond. Are there tools for this? Andrew ------------------------------------------------------------------- Andrew McNaughton http://www.scoop.co.nz/ andrew@scoop.co.nz Mobile: +61 422 753 792 pgp keyid: 1C7A8CFD -- "We are trying to figure out how you conduct a war against something other than a nation-state and how ... you conduct a war in countries that you are not at war with," -- Donald Rumsfeld, 27 Jan 2006 From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:43:45 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F91C16A42C for ; Wed, 31 May 2006 11:43:45 +0000 (UTC) (envelope-from stapleton.41@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.206]) by mx1.FreeBSD.org (Postfix) with ESMTP id D3A9B43D48 for ; Wed, 31 May 2006 11:43:44 +0000 (GMT) (envelope-from stapleton.41@gmail.com) Received: by nz-out-0102.google.com with SMTP id 16so10071nzp for ; Wed, 31 May 2006 04:43:44 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=unZQKp93+dCaA3vdI5I7I6IRTZJuvVCYB3tMMiwqXXWCaL9v3opsjbjb8piXHEcpQhkSXOUmBTeUedgfqtQprFz8s2qkOufcDOC8msFlzW8mGo2onVhqxDaR8w8RnO2BRTip2mL8OIaGkJU96gEdyimng3woo2cQchznGSAF9V8= Received: by 10.36.250.35 with SMTP id x35mr84757nzh; Wed, 31 May 2006 04:43:44 -0700 (PDT) Received: by 10.36.224.79 with HTTP; Wed, 31 May 2006 04:43:44 -0700 (PDT) Message-ID: <80f4f2b20605310443l2889c7a8nb4b8162ae283b893@mail.gmail.com> Date: Wed, 31 May 2006 07:43:44 -0400 From: "Jim Stapleton" To: freebsd-questions@freebsd.org In-Reply-To: <20060531030351.39871.qmail@web53804.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060531030351.39871.qmail@web53804.mail.yahoo.com> Subject: Re: How to get MAC address using C program X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:43:45 -0000 Could you exec() ifconfig? On 5/30/06, girish girishlc wrote: > Pls any body tell me how to find out a MAC address in a program, > > > Because I want to generate pseudo random number of IP address of some range for that MAC address and IP range will be the input and it should give IP address according to MAC address as a seed , but if I use difft MAC address (i,e for difft host ) it should give difft IP address, > > > But if I give first MAC address it should give the same old IP address, > > > So pls send me answer as soon as possible code in C and also if possible ALGORITHMS pls its very urgent > > > Thank you, > Regards > Girish.L.C > lc_girish@yahoo.com > > > --------------------------------- > Do you Yahoo!? > Get on board. You're invited to try the new Yahoo! Mail Beta. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 11:50:54 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2703F16A456 for ; Wed, 31 May 2006 11:50:54 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms044pub.verizon.net (vms044pub.verizon.net [206.46.252.44]) by mx1.FreeBSD.org (Postfix) with ESMTP id CE49743D4C for ; Wed, 31 May 2006 11:50:53 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.2] ([71.101.6.8]) by vms044.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J04007XSOWSFAQ1@vms044.mailsrvcs.net> for questions@FreeBSD.org; Wed, 31 May 2006 06:50:53 -0500 (CDT) Date: Wed, 31 May 2006 07:51:38 -0400 From: Joe In-reply-to: <20060531004426.GA36958@xor.obsecurity.org> To: Kris Kennaway Message-id: <447D834A.90000@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 11:50:54 -0000 Kris Kennaway wrote: > On Tue, May 30, 2006 at 08:12:25PM -0400, Joe wrote: >> The .ko files have a Nov 3 2005 date, whereas the files in /boot >> including the kernel directory have a May 6 2006 date. I take it that >> Nov 3 means 6.0-RELEASE since the announcement was done on Nov 4. So, I >> guess I'm back to the question of how to do a binary upgrade from 6.0 to >> 6.1 (and particularly where is this documented). Should I attempt >> another sysinstall Upgrade? > > Show me > > sysctl kern.version kern.version: FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Note, btw that the manpages (at least the one for sysctl) show 6.1-RELEASE at the bottom, confirming that parts of the base were indeed updated. > and the output of a failed package fetch. I'll try to send that a little later but seeing the above, shouldn't I just retry the binary upgrade and if so, what precautions should I take? I'm thinking of skipping the install of X.org so that no package conflicts turn up. Joe From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:22:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DC8F316A607 for ; Wed, 31 May 2006 12:22:25 +0000 (UTC) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (chylonia.3miasto.net [213.192.74.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5994543D5C for ; Wed, 31 May 2006 12:22:23 +0000 (GMT) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (localhost [127.0.0.1]) by chylonia.3miasto.net (8.13.4/8.13.4) with ESMTP id k4VCMEPi092303; Wed, 31 May 2006 14:22:14 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) Received: from localhost (wojtek@localhost) by chylonia.3miasto.net (8.13.4/8.13.4/Submit) with ESMTP id k4VCMDpT092300; Wed, 31 May 2006 14:22:13 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) X-Authentication-Warning: chylonia.3miasto.net: wojtek owned process doing -bs Date: Wed, 31 May 2006 14:22:13 +0200 (CEST) From: Wojciech Puchar X-X-Sender: wojtek@chylonia.3miasto.net To: Ewald Jenisch In-Reply-To: <20060531093224.GA2508@aurora.oekb.co.at> Message-ID: <20060531141838.T91987@chylonia.3miasto.net> References: <20060531093224.GA2508@aurora.oekb.co.at> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: freebsd-questions@freebsd.org Subject: Re: Selecting CPU/architecture for new system? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:22:33 -0000 > > I'm currently in the process of selecting hardware for a FreeBSD > system having the main task of collecting network statistics via MRTG > or RRDtool. In addition the machine in question should be used to > collect netflow statistics plus providing a web-interface for > displaying them. > > To give you an impression about the workload to be expected: Currently > the system is a dual Xeon machine with 3GHz-CPUs reaching work loads > (top) of 7 to 9. Disk-IO btw is not the problem. > > > For the new system I thought about a 4-CPU machine, 4GB RAM - with > either 32- or 64-bit architecture. definitely Opteron based. this are really FAST, including really fast memory bandwidth, not only CPU. at least - lowest end Athlon64 machines are comparable in speed with high end P4 :) FreeBSD works fine on Athlon64/Opteron machines. not tested (by me) on multiprocessor ones, but it should be not a problem. > o) Should I stick with a 32-bit architecture (i386) or go for any of > the 64-architectures? go to Opteron 64-bit architecture. > o) Is FreeBSD 6.1 considered equally stable under the i386 > architecture as under any of the 64bit architectures? > not tested by me. but simply test it before buying. > o) Are SMP-systems with 4 CPUs supported in i386? > yes. > o) Are SMP-systems with 4 CPU supported in any of the 64-bit > architectures? yes. > > o) Anything else to consider in this context? try to optimize software you use first :) only if it's impossible buy new machine. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:23:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EE57216A4ED for ; Wed, 31 May 2006 12:23:56 +0000 (UTC) (envelope-from wmoran@collaborativefusion.com) Received: from mx00.pub.collaborativefusion.com (mx00.pub.collaborativefusion.com [206.210.89.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7700743D48 for ; Wed, 31 May 2006 12:23:56 +0000 (GMT) (envelope-from wmoran@collaborativefusion.com) Received: from vanquish.pgh.priv.collaborativefusion.com (vanquish.pgh.priv.collaborativefusion.com [192.168.2.61]) (AUTH: LOGIN wmoran, TLS: TLSv1/SSLv3,256bits,AES256-SHA) by wingspan with esmtp; Wed, 31 May 2006 08:23:55 -0400 id 00056405.447D8ADB.0000C4BF Date: Wed, 31 May 2006 08:23:54 -0400 From: Bill Moran To: Andrew McNaughton Message-Id: <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> In-Reply-To: <20060531230821.T62075@a2.scoop.co.nz> References: <20060531230821.T62075@a2.scoop.co.nz> Organization: Collaborative Fusion X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.17; i386-portbld-freebsd6.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:24:03 -0000 On Wed, 31 May 2006 23:22:16 +1200 (NZST) Andrew McNaughton wrote: > > portaudit gives me alerts when security issues arise in installed ports, > and portversion keeps me abreast of less critical updates. It's a whole > lot easier than the old situation of tracking the security lists every > day. > > Is there a comparably easy way to track available and critical upgrades > for the FreeBSD core? The canonical way to do this is to subscribe to announce@ and/or security-announce@freebsd.org. Very low traffic, but important stuff you need to know comes through those channels. -- Bill Moran Collaborative Fusion Inc. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:25:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 48EE816A4CF for ; Wed, 31 May 2006 12:25:49 +0000 (UTC) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (chylonia.3miasto.net [213.192.74.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6D3A643D53 for ; Wed, 31 May 2006 12:25:48 +0000 (GMT) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (localhost [127.0.0.1]) by chylonia.3miasto.net (8.13.4/8.13.4) with ESMTP id k4VCPirX092723; Wed, 31 May 2006 14:25:44 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) Received: from localhost (wojtek@localhost) by chylonia.3miasto.net (8.13.4/8.13.4/Submit) with ESMTP id k4VCPibx092720; Wed, 31 May 2006 14:25:44 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) X-Authentication-Warning: chylonia.3miasto.net: wojtek owned process doing -bs Date: Wed, 31 May 2006 14:25:44 +0200 (CEST) From: Wojciech Puchar X-X-Sender: wojtek@chylonia.3miasto.net To: Nikolas Britton In-Reply-To: Message-ID: <20060531142230.A91987@chylonia.3miasto.net> References: <20060531093224.GA2508@aurora.oekb.co.at> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: Ewald Jenisch , freebsd-questions@freebsd.org Subject: Re: Selecting CPU/architecture for new system? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:25:53 -0000 > > Do you need more then 4GB of RAM, if so then your only option is 64-bit. not true. but it's true if you need over 3GB of VM for single process. > >> o) Is FreeBSD 6.1 considered equally stable under the i386 >> architecture as under any of the 64bit architectures? >> > > Sure, and you can still run i386 FreeBSD on a 64-bit chip. this way it doesn't make sense of buying 64-bit hardware. i use FreeBSD/amd64 (6.0) and it works excellent. > >> o) Anything else to consider in this context? >> > > Code compiling is very fast on AMDs chip thanks to HyperTransport and > the on-die memory controller, if your task can take advantage of this > AMD is your best bet. other tasks get from this adventage too, maybe not that much. lowest end AMD64 machines gets same memory bandwidth that high end P4 machines for 1/10 price :) (and still having lower latency). From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:28:58 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2531E16A4CB for ; Wed, 31 May 2006 12:28:58 +0000 (UTC) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (chylonia.3miasto.net [213.192.74.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0947A43D6B for ; Wed, 31 May 2006 12:28:54 +0000 (GMT) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (localhost [127.0.0.1]) by chylonia.3miasto.net (8.13.4/8.13.4) with ESMTP id k4VCSpo4092950 for ; Wed, 31 May 2006 14:28:51 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) Received: from localhost (wojtek@localhost) by chylonia.3miasto.net (8.13.4/8.13.4/Submit) with ESMTP id k4VCSpU4092946 for ; Wed, 31 May 2006 14:28:51 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) X-Authentication-Warning: chylonia.3miasto.net: wojtek owned process doing -bs Date: Wed, 31 May 2006 14:28:51 +0200 (CEST) From: Wojciech Puchar X-X-Sender: wojtek@chylonia.3miasto.net To: freebsd-questions@freebsd.org Message-ID: <20060531142608.X91987@chylonia.3miasto.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: FreeBSD notebook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:29:00 -0000 i would like to buy notebook to use with FreeBSD. Not new one, something like Pentium 200-PII/500 with 64-128MB RAM will be OK, and there are lots of them available cheaply. Unfortunately most of them have windows-only hardware. Does anyone here using such machine successfully with FreeBSD. successfully means: 1) PCMCIA works 2) disk works with DMA. 3) USB works 4) Network works (if present) 5) X works. Thanks From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:32:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 66A6916A595 for ; Wed, 31 May 2006 12:32:44 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id EBD5443D48 for ; Wed, 31 May 2006 12:32:43 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 23557 invoked from network); 31 May 2006 22:32:42 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 22:32:42 +1000 Date: Wed, 31 May 2006 22:32:39 +1000 From: Norberto Meijome To: freebsd-questions@freebsd.org Message-ID: <20060531223239.4a5d05b0@localhost> In-Reply-To: <80f4f2b20605310443l2889c7a8nb4b8162ae283b893@mail.gmail.com> References: <20060531030351.39871.qmail@web53804.mail.yahoo.com> <80f4f2b20605310443l2889c7a8nb4b8162ae283b893@mail.gmail.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: How to get MAC address using C program X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:32:46 -0000 On Wed, 31 May 2006 07:43:44 -0400 "Jim Stapleton" wrote: > Could you exec() ifconfig? at the risk of stating the bleeding obvious, maybe checking the code in ifconfig would show exactly what the original poster asked... you gotta love OpenSource ;) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:36:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E3F416A78C for ; Wed, 31 May 2006 12:36:32 +0000 (UTC) (envelope-from phil@chycor.com) Received: from C2bthomr05.btconnect.com (c2bthomr05.btconnect.com [194.73.73.220]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0763043D46 for ; Wed, 31 May 2006 12:36:31 +0000 (GMT) (envelope-from phil@chycor.com) Received: from chycor.com (85-210-51-196.dsl.pipex.com [85.210.51.196]) by C2bthomr05.btconnect.com (MOS 3.7.4b-GA) with ESMTP id ECG87955 (AUTH chycor); Wed, 31 May 2006 13:36:25 +0100 (BST) Received: from 192.168.7.2 for freebsd-questions@freebsd.org; Wed, 31 May 2006 13:33:14 +0100 Message-ID: <012001c684ae$cbecaf60$0207a8c0@P800> From: "Philip Radford" To: Date: Wed, 31 May 2006 13:36:10 +0100 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Philip Radford List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:36:33 -0000 Hi All, I have just installed FreeBSD 5.4 on a server with two hard disks. I have access to all my partitions on the first disk :- /dev/ad0s1a - / /dev/ad0s1e - /tmp /dev/ad0s1f - /usr /dev/ad0s1d - /var How do I go about mounting to the second drive which I assume would = start with /dev/ad1* I can find no reference to devices in the /dev directory and there is no = MAKEDEV script as I have used on a previous unix OS. Any ideas would be welcome. Regards Phil From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:40:53 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 014FF16A4F8 for ; Wed, 31 May 2006 12:40:53 +0000 (UTC) (envelope-from mgogebakan@neu.edu.tr) Received: from mail.neu.edu.tr (mail.neu.edu.tr [212.175.151.131]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3F89843D5C for ; Wed, 31 May 2006 12:40:50 +0000 (GMT) (envelope-from mgogebakan@neu.edu.tr) MIME-Version: 1.0 Content-class: urn:content-classes:message X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0 Date: Wed, 31 May 2006 15:49:42 +0300 Message-ID: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: release 6.1 Thread-Index: AcaEsK+c/Xzkh7p3TDabddOtF3Vrag== From: "mehmet gogebakan" To: Content-Type: text/plain; charset="iso-8859-9" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:40:53 -0000 i would like to install 6.1-RELEASE to my computer , configuration is: =20 128 MB SDRAM LG cdrom 52x 8 MB Grafic card=20 40 gb hd p3 800 mhz processor=20 azza motherboard=20 =20 could you please tell me whether this configuration is suitable, if not = tell me the minimum configuration it should be.. =20 thanx....=20 From owner-freebsd-questions@FreeBSD.ORG Wed May 31 12:46:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CF74616A526 for ; Wed, 31 May 2006 12:46:55 +0000 (UTC) (envelope-from linstef@verat.net) Received: from smtp2.verat.net (smtp4.verat.net [85.222.160.134]) by mx1.FreeBSD.org (Postfix) with ESMTP id D055A43D5C for ; Wed, 31 May 2006 12:46:53 +0000 (GMT) (envelope-from linstef@verat.net) Received: from localhost (localhost [127.0.0.1]) by smtp2.verat.net (Postfix) with ESMTP id 2BFF71D1A17 for ; Wed, 31 May 2006 14:46:49 +0200 (CEST) Received: from smtp2.verat.net ([127.0.0.1]) by localhost (smtp2.verat.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 11792-07 for ; Wed, 31 May 2006 14:46:49 +0200 (CEST) Received: by smtp2.verat.net (Postfix, from userid 505) id 1706C1D1A6C; Wed, 31 May 2006 14:46:49 +0200 (CEST) Received: from AMD1700 (unknown [217.26.67.77]) by smtp2.verat.net (Postfix) with SMTP id 0525A1D1A17 for ; Wed, 31 May 2006 14:46:44 +0200 (CEST) Message-ID: <007301c684b0$4537c070$0201a8c0@AMD1700> From: "Stefi" To: "FreeBSD pitanja" References: <000801c68312$4d2e5590$0201a8c0@AMD1700><200605290912.49807.mark@msen.com> Date: Wed, 31 May 2006 14:46:38 +0200 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-Virus-Scanned: amavisd-new at verat.net Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 12:46:58 -0000 ----- Original Message ----- >From: "Atanas Atanasov" >To: >Sent: Monday, May 29, 2006 7:08 PM >Subject: Re: Problem with wireless card drivers >Hi Stefi, >I am having trouble getting my wlan card working. My problem is that >after I load the kernel modules, I see no adapter with ifconfig. Could >you please tell me whether after moving the ko file to /boot/kenel you >did something else like kldxref or not. I tried to update the >references but it gives me an error "kldxref: can't read hash table". >Have you encountered anything of this type? >Atanas Hi Atanas I didn't use anythin like this. All I have done was by the instructions for ndisgen. First I recompiled kernel to be sure that the wireless support is included. Then copy original Windows drivers for wireless card in some directory. To cut the story, just run #ndisgen if you are runnig FreeBsd 6 or higher. Then you'll find all explanations you need on how to recompile Windows drivers for use in BSD. It will generate kernel modules. Copy it to /boot/kernel and load with #kldload name_of_the_file.ko. Be sure to have a firmware for the card too.Load it all. After it you should see your device using ifconfig like ndis0. Use FreeBSD manual to configure your card for wireless network. Cards that are suported for sure are the one with Prism chipset. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:09:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9D01B16A8D8 for ; Wed, 31 May 2006 13:09:31 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2A1F343D77 for ; Wed, 31 May 2006 13:09:31 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 24348 invoked from network); 31 May 2006 23:09:30 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 23:09:30 +1000 Date: Wed, 31 May 2006 23:09:25 +1000 From: Norberto Meijome To: David Landgren Message-ID: <20060531230925.1712840f@localhost> In-Reply-To: <447D5D11.9050604@landgren.net> References: <447D5D11.9050604@landgren.net> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Adding an extra Apache DSO module after 'make install' X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:09:39 -0000 On Wed, 31 May 2006 11:08:33 +0200 David Landgren wrote: > Having built an Apache 2.0.58 from ports and watching it run, I realise > that I forgot to include mod_negotiation. Is it possible to return the > the ports directory, rebuild the package, it comes installed by default.in the precompiled package, in case you havent done any tweaking of the build params > this time with the addition > module, and simply take the built mod_negotation.so and add it to the > libexec/apache2 directory? as root, edit /var/db/ports/apache20/options, set to true the one you want (or add it if not there). If you cant figure which one it is, delete that dir in /var/db/ports and run make config in the port dir. Then : cd /usr/ports/www/apache20 make apachectl stop make deinstall make reinstall apachectl start > > Either that, or is there a more general method within the ports > framework of taking a mod_*.c file and converting it to a DSO for > inclusion with httpd after the fact? there may be if building apache from source outside of ports. For me it's not worth the effort of trying to figure it out each time. > I.e, if possible I would like to > avoid reinstalling the httpd world, but on the other hand, I don't want > the new .so file to cause a segfault because of some sort of API mismatch. you'd only have to build apache again (not that bad)... there are actually 116 different mod_ ported individually... it would be cool to have the default ones that come w/apache too :) Beto From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:12:11 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D098D16A9F8 for ; Wed, 31 May 2006 13:12:11 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 559A343D46 for ; Wed, 31 May 2006 13:12:11 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 24435 invoked from network); 31 May 2006 23:12:10 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 23:12:10 +1000 Date: Wed, 31 May 2006 23:12:06 +1000 From: Norberto Meijome To: "mehmet gogebakan" Message-ID: <20060531231206.41eca635@localhost> In-Reply-To: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:12:30 -0000 On Wed, 31 May 2006 15:49:42 +0300 "mehmet gogebakan" wrote: > 128 MB SDRAM > LG cdrom 52x > 8 MB Grafic card > 40 gb hd > p3 800 mhz processor > azza motherboard she'll be right mate :) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:13:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 02D0016AA04 for ; Wed, 31 May 2006 13:13:40 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 844C443D7F for ; Wed, 31 May 2006 13:13:39 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 24525 invoked from network); 31 May 2006 23:13:38 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 23:13:38 +1000 Date: Wed, 31 May 2006 23:13:35 +1000 From: Norberto Meijome To: snnn119@gmail.com Message-ID: <20060531231335.766a64ac@localhost> In-Reply-To: <447D5A90.3090401@gmail.com> References: <447D53FE.5000003@gmail.com> <447D57D5.7010004@webanoide.org> <447D5A90.3090401@gmail.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Mikhail Goriachev , freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:13:45 -0000 On Wed, 31 May 2006 16:57:52 +0800 snnn wrote: > # pkgdb -F > ---> Checking the package registry database > [Updating the pkgdb in /var/db/pkg ... Illegal instruction > > > :-( move /var/db/pkg/pkgdb.db out of the way and run pkgdb -F again - it usually helps me when i get into those pickles... From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:15:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9734316AA9E for ; Wed, 31 May 2006 13:15:34 +0000 (UTC) (envelope-from bob.middaugh@comcast.net) Received: from rwcrmhc12.comcast.net (rwcrmhc12.comcast.net [216.148.227.152]) by mx1.FreeBSD.org (Postfix) with ESMTP id 45A6543D6A for ; Wed, 31 May 2006 13:15:34 +0000 (GMT) (envelope-from bob.middaugh@comcast.net) Received: from rmailcenter75.comcast.net ([204.127.197.157]) by comcast.net (rwcrmhc12) with SMTP id <20060531131525m1200lrrale>; Wed, 31 May 2006 13:15:33 +0000 Received: from [199.20.118.218] by rmailcenter75.comcast.net; Wed, 31 May 2006 13:15:25 +0000 From: bob.middaugh@comcast.net To: Wojciech Puchar , freebsd-questions@freebsd.org Date: Wed, 31 May 2006 13:15:25 +0000 Message-Id: <053120061315.2962.447D96ED00024CE000000B92220642461308099A0E0B0B0703D20D010D@comcast.net> X-Mailer: AT&T Message Center Version 1 (Apr 11 2006) X-Authenticated-Sender: Ym9iLm1pZGRhdWdoQGNvbWNhc3QubmV0 Cc: Subject: Re: FreeBSD notebook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:15:44 -0000 -------------- Original message ---------------------- From: Wojciech Puchar > i would like to buy notebook to use with FreeBSD. Not new one, something > like Pentium 200-PII/500 with 64-128MB RAM will be OK, and there are lots > of them available cheaply. > > Unfortunately most of them have windows-only hardware. > Does anyone here using such machine successfully with FreeBSD. > > successfully means: > > 1) PCMCIA works > 2) disk works with DMA. > 3) USB works > 4) Network works (if present) > 5) X works. > > Thanks This should get you started, there may be others. http://www.zapatec.com/freebsd/laptop/ http://www.cse.ucsc.edu/~dkulp/fbsd/laptop.html http://www.freebsd.org/doc/en_US.ISO8859-1/articles/laptop/article.html Bob From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:15:33 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4175716AA97 for ; Wed, 31 May 2006 13:15:33 +0000 (UTC) (envelope-from erikt@owl.midgard.homeip.net) Received: from pne-smtpout2-sn2.hy.skanova.net (pne-smtpout2-sn2.hy.skanova.net [81.228.8.164]) by mx1.FreeBSD.org (Postfix) with ESMTP id C9F9E43D6A for ; Wed, 31 May 2006 13:15:32 +0000 (GMT) (envelope-from erikt@owl.midgard.homeip.net) Received: from falcon.midgard.homeip.net (83.253.29.241) by pne-smtpout2-sn2.hy.skanova.net (7.2.072.1) id 447AF0DC000ABC5C for questions@freebsd.org; Wed, 31 May 2006 15:15:31 +0200 Received: (qmail 3219 invoked from network); 31 May 2006 15:15:31 +0200 Received: from owl.midgard.homeip.net (10.1.5.7) by falcon.midgard.homeip.net with SMTP; 31 May 2006 15:15:31 +0200 Received: (qmail 41346 invoked by uid 1001); 31 May 2006 15:15:31 +0200 Date: Wed, 31 May 2006 15:15:31 +0200 From: Erik Trulsson To: mehmet gogebakan Message-ID: <20060531131530.GA41305@owl.midgard.homeip.net> Mail-Followup-To: mehmet gogebakan , questions@freebsd.org References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> User-Agent: Mutt/1.5.11 Cc: questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:15:44 -0000 On Wed, May 31, 2006 at 03:49:42PM +0300, mehmet gogebakan wrote: > i would like to install 6.1-RELEASE to my computer , configuration is: > > 128 MB SDRAM > LG cdrom 52x > 8 MB Grafic card > 40 gb hd > p3 800 mhz processor > azza motherboard > > could you please tell me whether this configuration is suitable, if not > tell me the minimum configuration it should be.. Running 6.1 on that should not be any problem. In fact you could take a computer with only half the RAM of the above, half the disk space, and half the CPU speed, and still not have a problem running FreeBSD 6.1. -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:15:56 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6D18F16AAAD for ; Wed, 31 May 2006 13:15:56 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 15D4343D77 for ; Wed, 31 May 2006 13:15:55 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k4VDFt0N007351; Wed, 31 May 2006 09:15:55 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k4VDFtW5007350; Wed, 31 May 2006 09:15:55 -0400 (EDT) From: Jerry McAllister Message-Id: <200605311315.k4VDFtW5007350@clunix.cl.msu.edu> To: mgogebakan@neu.edu.tr (mehmet gogebakan) Date: Wed, 31 May 2006 09:15:55 -0400 (EDT) In-Reply-To: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:16:03 -0000 > > i would like to install 6.1-RELEASE to my computer , configuration is: > > 128 MB SDRAM > LG cdrom 52x > 8 MB Grafic card > 40 gb hd > p3 800 mhz processor > azza motherboard > > could you please tell me whether this configuration is suitable, if not > tell me the minimum configuration it should be.. It should work OK. It might be a little slow by current standards. I am not familiar specifically with azza, but if it is fairly standard, it should be OK. I don't see a NIC card listed. That is not required to run the OS, but you will want something in there to talk with the net. ////jerry > > thanx.... > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:16:51 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 88A4D16A60B for ; Wed, 31 May 2006 13:16:51 +0000 (UTC) (envelope-from ytresearch@hughes.net) Received: from n016.sc0.cp.net (smtpout1099.sc0.cp.net [64.97.144.99]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9AB9F43D46 for ; Wed, 31 May 2006 13:16:49 +0000 (GMT) (envelope-from ytresearch@hughes.net) Received: from [192.168.1.100] (67.47.213.85) by n016.sc0.cp.net (7.2.069.1) (authenticated as eagletree@hughes.net) id 4477F14E0008329A; Wed, 31 May 2006 13:16:48 +0000 In-Reply-To: <447D605D.9020202@ant.uni-bremen.de> References: <447D605D.9020202@ant.uni-bremen.de> Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: YTResearch Date: Wed, 31 May 2006 06:16:38 -0700 To: Heinrich Rebehn X-Mailer: Apple Mail (2.750) Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:17:00 -0000 We are running the S4882-D and it has the Broadcom GB dual adapter built in (recognized as ). It seems to work without problems and we've run both to two different networks (right now running only one). We are connecting at 100baseT so I don't have experience running at GB speeds. I'm not detecting any network bottlenecks at all and I've been watching very carefully due to stability problems. We are running 6.0 RELEASE amd64 SMP 4/8 CPUs 8 GB. I don't know if the 2882 is identical in architecture but if so, strongly recommend NOT using 6.0 and trying 6.1. We are panicing daily and experience about 4 minutes a day downtime. Never have had FreeBSD be so unstable in 7 years. On May 31, 2006, at 2:22 AM, Heinrich Rebehn wrote: > Hi list, > > can anyone recommend a 1000BASE-SX ethernet adapter for PCI-X slot, > that > is well supported by FreeBSD-amd64?. > I want to use it in a TYAN Thunder K8SD Pro (S2882-D) board. > > TIA, > > Heinrich Rebehn > > University of Bremen > Physics / Electrical and Electronics Engineering > - Department of Telecommunications - > > Phone : +49/421/218-4664 > Fax : -3341 > _______________________________________________ > freebsd-amd64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 > To unsubscribe, send any mail to "freebsd-amd64- > unsubscribe@freebsd.org" > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:17:51 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 29C1316AB99 for ; Wed, 31 May 2006 13:17:51 +0000 (UTC) (envelope-from josh@clearwired.com) Received: from a.mx.zettai.net (beta.zettai.net [205.234.172.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id B887843D7E for ; Wed, 31 May 2006 13:17:50 +0000 (GMT) (envelope-from josh@clearwired.com) Received: (qmail 40164 invoked by uid 89); 31 May 2006 13:24:29 -0000 Received: by simscan 1.2.0 ppid: 33435, pid: 40008, t: 0.1101s scanners: attach: 1.1.0 clamav: 0.83/m:31/d:852 Received: from unknown (HELO ?10.1.10.150?) (josh@clearwired.com@68.35.27.129) by 0 with SMTP; 31 May 2006 13:24:29 -0000 Message-ID: <447D4315.5090701@clearwired.com> Date: Wed, 31 May 2006 07:17:41 +0000 From: Josh Stephenson User-Agent: Thunderbird 1.5 (X11/20060317) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <1149010058.23661.22.camel@c-68-35-27-129.hsd1.nm.comcast.net> <20060530215322.6af8b241@vixen42.vulpes> In-Reply-To: <20060530215322.6af8b241@vixen42.vulpes> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: intel pro wireless 2200bg support X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:18:04 -0000 Unfortunately...I get the same error when using weptxkey 1: iwi0: fatal error iwi0: device configuration failed any other ideas? Vulpes Velox wrote: > On Tue, 30 May 2006 17:27:38 +0000 > Josh Stephenson wrote: > > >> I'm trying to get my toshiba laptop's wireless connection >> configured on freebsd 6.0 stable. It's got an intel pro wireless >> 2200bg card. I'm trying to connect to a dhcp wireless network with >> 64 bit wep. Here's what I've done: >> >> I installed iwi-firmware-2.4_2.tbz as a package >> >> me@myputer$ dmesg | grep iwi >> iwi0: mem 0xb8006000-0xb8006fff irq >> 22 at device 2.0 on pci6 >> iwi0: Ethernet address: >> >> me@myputer$ kldload wlan_wep >> me@myputer$ iwicontrol -i iwi0 -d /boot/firmware -m bss >> me@myputer$ ifconfig iwi0 10.1.10.109 netmask 255.255.255.0 ssid >> wepmode on wepkey >> iwi0: fatal errorme@myputer$ >> iwi0: device configuration failed >> > > You are not telling it which weptxkey to you. Put 'weptxkey 1' in > there and it should work. > > >> if I do 'ifconfig iwi0', i get: >> ---snip-- >> inet 10.1.10.109 netmask 0xffffff00 broadcast 10.1.10.255 >> ether >> media: IEEE 802.11 Wireless Ethernet autoselect >> status: no carrier >> ssid channel 1 >> authmode OPEN privacy ON deftxkey UNDEF wepkey 1:104-bit txpowmax >> 100 protmode CTS >> > > > You may also want to checking out the iwiNG driver as well. Check the > freebsd net mailing list for more info on that. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:22:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2738816A67C for ; Wed, 31 May 2006 13:22:31 +0000 (UTC) (envelope-from bob.middaugh@comcast.net) Received: from rwcrmhc14.comcast.net (rwcrmhc14.comcast.net [204.127.192.84]) by mx1.FreeBSD.org (Postfix) with ESMTP id C8D2E43D73 for ; Wed, 31 May 2006 13:22:30 +0000 (GMT) (envelope-from bob.middaugh@comcast.net) Received: from rmailcenter19.comcast.net ([204.127.197.129]) by comcast.net (rwcrmhc14) with SMTP id <20060531132229m14009l5afe>; Wed, 31 May 2006 13:22:29 +0000 Received: from [199.20.118.218] by rmailcenter19.comcast.net; Wed, 31 May 2006 13:22:27 +0000 From: bob.middaugh@comcast.net To: Wojciech Puchar , freebsd-questions@freebsd.org Date: Wed, 31 May 2006 13:22:27 +0000 Message-Id: <053120061322.599.447D9893000B7B4200000257220699849908099A0E0B0B0703D20D010D@comcast.net> X-Mailer: AT&T Message Center Version 1 (Apr 11 2006) X-Authenticated-Sender: Ym9iLm1pZGRhdWdoQGNvbWNhc3QubmV0 Cc: Subject: Re: FreeBSD notebook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:22:36 -0000 -------------- Original message ---------------------- From: Wojciech Puchar > i would like to buy notebook to use with FreeBSD. Not new one, something > like Pentium 200-PII/500 with 64-128MB RAM will be OK, and there are lots > of them available cheaply. > > Unfortunately most of them have windows-only hardware. > Does anyone here using such machine successfully with FreeBSD. > > successfully means: > > 1) PCMCIA works > 2) disk works with DMA. > 3) USB works > 4) Network works (if present) > 5) X works. > > Thanks http://gerda.univie.ac.at/freebsd-laptops/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:32:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 45AA516ADCB for ; Wed, 31 May 2006 13:32:32 +0000 (UTC) (envelope-from iaccounts@ibctech.ca) Received: from pearl.ibctech.ca (pearl.ibctech.ca [209.167.58.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7D73943D6B for ; Wed, 31 May 2006 13:32:30 +0000 (GMT) (envelope-from iaccounts@ibctech.ca) Received: (qmail 30137 invoked by uid 1002); 31 May 2006 13:32:29 -0000 Received: from iaccounts@ibctech.ca by pearl.ibctech.ca by uid 89 with qmail-scanner-1.22 (spamassassin: 2.64. Clear:RC:1(209.167.16.15):. Processed in 2.619669 secs); 31 May 2006 13:32:29 -0000 Received: from unknown (HELO xzibit) (209.167.16.15) by pearl.ibctech.ca with (RC4-MD5 encrypted) SMTP; 31 May 2006 13:32:26 -0000 From: "Steve Bertrand" To: "'freebsd-questions@FreeBSD.ORG'" Date: Wed, 31 May 2006 09:30:27 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 In-Reply-To: <73db090acabea3f364af96f7b267edba@pacific.net.au> Thread-Index: AcaEbUH8A2GgyswhTmaoXD0UHViaFQASLljA X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Qmail-Scanner-Message-ID: <114908234667530131@pearl.ibctech.ca> Message-Id: <20060531133230.7D73943D6B@mx1.FreeBSD.org> Subject: RE: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:32:43 -0000 > > There we have it. Apache is unable to resolve "bsd-box". > This hostname > > should be resolvable, otherwise Apache will not work. Adding it to > > /etc/hosts is the easiest way: > > > > 192.168.1.104 bsd-box bsd-box.yourdomain.com > > This line was already in /etc/hosts; > > 127.0.0.1 localhost localhost.home.net bsd-box > bsd-box.home.net > > and I've added this line > > 192.168.1.104 bsd-box bsd-box.home.net > > > > > In addition to Jorn's advice, check /etc/defaults/rc.conf. > The file > > should exist and have permissions like so: > > > > $ ls -l /etc/defaults/rc.conf > > -r--r--r-- 1 root wheel 31735 May 15 18:48 /etc/defaults/rc.conf > > > > and it should have the following line within: > > > > $ grep lo0 /etc/defaults/rc.conf > > ifconfig_lo0="inet 127.0.0.1" # default loopback device > > configuration. > > All present. > > Still cannot connect to localhost. Take a look at the 'ServerName' directive in your httpd.conf file. Try uncommenting said directive, and put your IP address beside it. From httpd.conf, look particularily at the last paragraph: # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. However, I would think the hosts file would have done it though, but it's worth a try. Steve From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:34:46 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0A42516AD56 for ; Wed, 31 May 2006 13:34:46 +0000 (UTC) (envelope-from josh@clearwired.com) Received: from a.mx.zettai.net (beta.zettai.net [205.234.172.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7B24043D58 for ; Wed, 31 May 2006 13:34:45 +0000 (GMT) (envelope-from josh@clearwired.com) Received: (qmail 17347 invoked by uid 89); 31 May 2006 13:41:26 -0000 Received: by simscan 1.2.0 ppid: 13822, pid: 16269, t: 0.0853s scanners: attach: 1.1.0 clamav: 0.83/m:31/d:852 Received: from unknown (HELO ?10.1.10.150?) (josh@clearwired.com@68.35.27.129) by 0 with SMTP; 31 May 2006 13:41:26 -0000 Message-ID: <447D4710.3020901@clearwired.com> Date: Wed, 31 May 2006 07:34:40 +0000 From: Josh Stephenson User-Agent: Thunderbird 1.5 (X11/20060317) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <1149008753.23661.11.camel@c-68-35-27-129.hsd1.nm.comcast.net> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Image-SIG] libjpeg and pil on intel mac os x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:34:55 -0000 It says: import _imaging # dynamically loaded from /usr/local/lib/python2.4/site-packages/PIL/_imaging.so what now? I know I'm not python savvy, so thx for helping How do I interpret this.Fredrik Lundh wrote: > Josh Stephenson wrote: > > >> I'm running an intel mac 10.4 with python 2.4.2 and trying to install >> pil 1.1.5. I have already configured jpeg-6b. Here's how I configured >> it: >> ./configure --enabled-shared --includedir=/usr/local/include >> --libdir=/usr/local/lib >> >> It installed with no errors. >> > > >> raise IOError("decoder %s not available" % decoder_name) >> IOError: decoder jpeg not available >> 1 items had failures: >> 1 of 55 in selftest.testimage >> ***Test Failed*** 1 failures. >> *** 1 tests of 55 failed. >> >> It isn't finding the jpeg decoder when I know it's there. Any help >> would be awesome! >> > > quoting myself from a message posted only a few days ago: > > try running Python with the -v (or -vv) option, to see if it really > picks up the _imaging module you built. > > $ python -vv -c "import _imaging" > > (why is it that nobody ever googles after error messages any more ? hmm...) > > > > _______________________________________________ > Image-SIG maillist - Image-SIG@python.org > http://mail.python.org/mailman/listinfo/image-sig > > > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 13:37:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DF20316AE84 for ; Wed, 31 May 2006 13:37:48 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 521A443D7E for ; Wed, 31 May 2006 13:37:48 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4VDb6IK041161; Wed, 31 May 2006 08:37:14 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447D9BFC.9080304@daleco.biz> Date: Wed, 31 May 2006 08:37:00 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Philip Radford References: <012001c684ae$cbecaf60$0207a8c0@P800> In-Reply-To: <012001c684ae$cbecaf60$0207a8c0@P800> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 13:37:53 -0000 Philip Radford wrote: > Hi All, > > I have just installed FreeBSD 5.4 on a server with two hard disks. Cool ... :) > > I have access to all my partitions on the first disk :- > > /dev/ad0s1a - / > /dev/ad0s1e - /tmp > /dev/ad0s1f - /usr > /dev/ad0s1d - /var > > How do I go about mounting to the second drive which I > assume would start with /dev/ad1* > $ dmesg | grep ad might help you turn the assumption into known fact. It will be "ad1" if (and only if) it's an ATA (not SCSI) hard disk on the primary IDE controller in the slave position. For example, the "secondary master" is ad2. > I can find no reference to devices in the /dev directory > and there is no MAKEDEV script as I have used on a previous unix OS. > FreeBSD 5 and later uses devfs, therefore no MAKEDEV is necessary. However, I don't think you'll see any /dev/ad1 entries until you prepare the disk. Brief overview is "fdisk, bsdlabel, newfs". See www.freebsd.org/handbook, chapter 17 --- in particular, 17.3 is "Adding Disks". HTH, Kevin Kinsey -- If I had to live my life again, I'd make the same mistakes, only sooner. -- Tallulah Bankhead From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:23:12 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9612F16A58C for ; Wed, 31 May 2006 14:23:12 +0000 (UTC) (envelope-from bkoenig@cs.tu-berlin.de) Received: from efacilitas.de (smtp.efacilitas.de [85.10.196.108]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3300643D53 for ; Wed, 31 May 2006 14:23:11 +0000 (GMT) (envelope-from bkoenig@cs.tu-berlin.de) Received: from eurystheus.local (port-212-202-39-242.dynamic.qsc.de [212.202.39.242]) by efacilitas.de (Postfix) with ESMTP id 623094CF5F; Wed, 31 May 2006 16:23:22 +0200 (CEST) Received: from [192.168.1.2] (muhkuh.local [192.168.1.2]) by eurystheus.local (Postfix) with ESMTP id 26DB35285D; Wed, 31 May 2006 16:21:40 +0200 (CEST) Message-ID: <447DA6D2.2020605@cs.tu-berlin.de> Date: Wed, 31 May 2006 16:23:14 +0200 From: =?ISO-8859-15?Q?Bj=F6rn_K=F6nig?= User-Agent: Thunderbird 1.5 (X11/20060317) MIME-Version: 1.0 To: snnn119@gmail.com References: <447D53FE.5000003@gmail.com> In-Reply-To: <447D53FE.5000003@gmail.com> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:23:15 -0000 snnn wrote: > # portupgrade scim\* > [Updating the pkgdb in /var/db/pkg ... Illegal > instruction I don't know exactly who says "Illegal instruction" in your case, but I would take it as a hint that you try to execute code that doesn't work with your CPU. Did you compiled ruby yourself and used special CFLAGS? What kind of CPU do you use? Björn From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:24:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 69F8416ACA4 for ; Wed, 31 May 2006 14:24:53 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail5.sea5.speakeasy.net (mail5.sea5.speakeasy.net [69.17.117.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1549443D5F for ; Wed, 31 May 2006 14:24:52 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 6144 invoked from network); 31 May 2006 14:24:52 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail5.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 31 May 2006 14:24:52 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 8A38F28449; Wed, 31 May 2006 10:24:51 -0400 (EDT) To: andy@triera.net References: From: Lowell Gilbert Date: Wed, 31 May 2006 10:24:51 -0400 In-Reply-To: (Andy Rozman's message of "Mon, 29 May 2006 13:58:02 +0200") Message-ID: <44irnm1dcc.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: corruption problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:24:55 -0000 "Andy Rozman (Aleksander)" writes: > Hi ! > > I have FreeBSD 6.1 installed with big disk (300 Gb). FreeBSD is working > fine, but I noticed that some files become corrupt. I have about 80 Gb > partioned for FreeBSD and other space is divided into 3 dos (fat32) > partitions. > > I have some jar files on one of this "dos" disks, and javac notices at > some times that .jar files have become corrupt. If I replace this files > then everything starts working ok. > > Has somebody else come accross this problem, or something similar? I don't recall having heard of such an issue affecting anyone else. Are you sure it isn't a hardware failure? That would be my first suspicion if it happened to me. > At this time I am running only FreeBSD on my machine, but if this > problem persists I will have to install Windows again. Oh yes. My system > is running AMD X2, but I am still running under i386 kernel image, > because I have some problems compiling amd64... Which may be related? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:30:17 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1D6A716B2F7 for ; Wed, 31 May 2006 14:30:17 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id B9DC443D48 for ; Wed, 31 May 2006 14:30:16 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 14201 invoked from network); 31 May 2006 14:30:16 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 31 May 2006 14:30:15 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 71CC728449; Wed, 31 May 2006 10:30:15 -0400 (EDT) To: Imran Imtiaz References: <200605300548.k4U5mMOC043109@darkstar.thelakecity.com.pk> From: Lowell Gilbert Date: Wed, 31 May 2006 10:30:15 -0400 In-Reply-To: <200605300548.k4U5mMOC043109@darkstar.thelakecity.com.pk> (Imran Imtiaz's message of "Tue, 30 May 2006 10:48:22 +0500 (PKT)") Message-ID: <44ejya1d3c.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: why dns timeout error is occuring X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:30:28 -0000 Imran Imtiaz writes: > I am having a local dns server that resolves the ips for my lan but when it try to resolve an ip it give me dns timeout error and also resolves the IP what can the the problem, below is the output of nslookup command on windows. > > C:\Documents and Settings\Imran>nslookup bsd.thelakecity.com.pk > Server: darkstar.thelakecity.com.pk > Address: 192.168.0.3 > > DNS request timed out. > timeout was 2 seconds. > Name: darkstar.thelakecity.com.pk > Address: 192.168.0.3 > Aliases: bsd.thelakecity.com.pk I assume the DNS server is a FreeBSD machine with BIND, yes? Check whether a lookup for that name works on the server itself. If not, make sure you have named(8) actually running. If so, make sure the Windows machine's DNS requests are actually getting to the server. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:44:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 85F3116AFEE for ; Wed, 31 May 2006 14:44:33 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail4.sea5.speakeasy.net (mail4.sea5.speakeasy.net [69.17.117.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id EEFFF43D55 for ; Wed, 31 May 2006 14:44:32 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 29183 invoked from network); 31 May 2006 14:44:32 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail4.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 31 May 2006 14:44:32 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 3E2B72844C; Wed, 31 May 2006 10:44:31 -0400 (EDT) To: "Iantcho Vassilev" References: <18e02bd30605290545j1c9cceebwedc8d28bbf270e11@mail.gmail.com> From: Lowell Gilbert Date: Wed, 31 May 2006 10:44:31 -0400 In-Reply-To: <18e02bd30605290545j1c9cceebwedc8d28bbf270e11@mail.gmail.com> (Iantcho Vassilev's message of "Mon, 29 May 2006 15:45:20 +0300") Message-ID: <44ac8y1cfk.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: FreeBSD Mailing List Subject: Re: kern.ipc.somaxconn should be high for a PF firewall with a lot of states X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: FreeBSD Mailing List List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:44:37 -0000 "Iantcho Vassilev" writes: > kern.ipc.somaxconn is for handling more incoming connections,right? Well, kind of. It's a systemwide limit on the maximum number of connections that a given socket can accept. > but does > firewall connections are considered incoming? No, not really. But the question doesn't really make sense. What are you trying to do? -- Lowell Gilbert, embedded/networking software engineer, Boston area http://be-well.ilk.org/~lowell/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:45:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 718CC16AC09 for ; Wed, 31 May 2006 14:45:09 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id D39AE43D55 for ; Wed, 31 May 2006 14:45:08 +0000 (GMT) (envelope-from freebsd-questions@m.gmane.org) Received: from root by ciao.gmane.org with local (Exim 4.43) id 1FlRwU-0007qL-Hc for freebsd-questions@freebsd.org; Wed, 31 May 2006 16:45:02 +0200 Received: from panix2.panix.com ([166.84.1.2]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 31 May 2006 16:45:02 +0200 Received: from mark.evenson by panix2.panix.com with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Wed, 31 May 2006 16:45:02 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org From: Mark Evenson Date: Wed, 31 May 2006 15:11:55 +0200 Lines: 30 Message-ID: <447D961B.9000407@gmx.at> References: <20060530184359.18725.qmail@web50004.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: panix2.panix.com User-Agent: Thunderbird 1.5.0.2 (X11/20060518) In-Reply-To: <20060530184359.18725.qmail@web50004.mail.yahoo.com> Sender: news Subject: Re: libgnome-keyring.so.0 not found X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:45:10 -0000 Jim Angstadt wrote: > Hi All, > > Fortunately, after another multi-day > "portmanager -u -l -y" run, I am able > to get into X. Unfortunately, I cannot > run gedit, gnome-terminal or nautilus. > > X provided 3 error messages > which I have manually copied: > > /libexec/ld-elf.so.1: Shared object > "libgnome-keyring.so.0" not found, > required by "gedit" [...] Assuming that these libraries exist on the filesystem, you might try refreshing the dynamic library cache via: root# ldconfig -m /usr/X11R6/lib Over the last week, something in the portupgrade process changes the ownership of /usr/X11R6/lib to the user that invokes portupgrade with "-s", which breaks this step in the course of portupgrade (ldconfig refuses to run on directories not owned by its invoking user). I haven't been able to track down where this is occuring, but changing the ownership of /usr/X11R6/lib back to root and refreshing the cache fixes this sort of problem for me. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:50:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 515C216ACE7 for ; Wed, 31 May 2006 14:50:03 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5FF8743D46 for ; Wed, 31 May 2006 14:49:59 +0000 (GMT) (envelope-from keramida@ceid.upatras.gr) Received: from gothmog.pc (host5.bedc.ondsl.gr [62.103.39.229]) (authenticated bits=128) by igloo.linux.gr (8.13.6/8.13.6/Debian-1) with ESMTP id k4VEmvkf032577 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 31 May 2006 17:49:01 +0300 Received: from gothmog.pc (gothmog [127.0.0.1]) by gothmog.pc (8.13.6/8.13.6) with ESMTP id k4VEp9Eh056483; Wed, 31 May 2006 17:51:09 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Received: (from giorgos@localhost) by gothmog.pc (8.13.6/8.13.6/Submit) id k4VEp6tG056482; Wed, 31 May 2006 17:51:06 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Wed, 31 May 2006 17:51:06 +0300 From: Giorgos Keramidas To: Kevin Kinsey Message-ID: <20060531145106.GA56445@gothmog.pc> References: <012001c684ae$cbecaf60$0207a8c0@P800> <447D9BFC.9080304@daleco.biz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <447D9BFC.9080304@daleco.biz> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (score=-2.401, required 5, ALL_TRUSTED -1.80, AWL -0.21, BAYES_00 -2.60, BIZ_TLD 2.01, DNS_FROM_RFC_ABUSE 0.20) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: Philip Radford , freebsd-questions@freebsd.org Subject: Re: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:50:08 -0000 On 2006-05-31 08:37, Kevin Kinsey wrote: >Philip Radford wrote: >>Hi All, >> I have just installed FreeBSD 5.4 on a server with two hard disks. > > Cool ... :) Nice :) >> I have access to all my partitions on the first disk :- >> >> /dev/ad0s1a - / >> /dev/ad0s1e - /tmp >> /dev/ad0s1f - /usr >> /dev/ad0s1d - /var >> >> How do I go about mounting to the second drive which I >> assume would start with /dev/ad1* > > $ dmesg | grep ad Another way is through atacontrol: # atacontrol list ATA channel 0: Master: ad0 ATA/ATAPI revision 6 Slave: no device present ATA channel 1: Master: no device present Slave: no device present ATA channel 2: Master: ad4 Serial ATA II Slave: no device present ATA channel 3: Master: no device present Slave: no device present Then you can use fdisk/bsdlabel/newfs on ad2 as usual :) From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:50:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 754D716AF9E for ; Wed, 31 May 2006 14:50:26 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1948843D53 for ; Wed, 31 May 2006 14:50:26 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 22671 invoked from network); 31 May 2006 14:50:25 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 31 May 2006 14:50:25 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id D25E02844A; Wed, 31 May 2006 10:50:24 -0400 (EDT) To: ss650120@ms10.hinet.net References: <000c01c683d8$ca03a950$c80a738c@yatung> From: Lowell Gilbert Date: Wed, 31 May 2006 10:50:24 -0400 In-Reply-To: <000c01c683d8$ca03a950$c80a738c@yatung> (=?big5?B?uLOm9sBz?= =?big5?B?J3M=?= message of "Tue, 30 May 2006 19:04:13 +0800") Message-ID: <443beq1c5r.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=big5 Content-Transfer-Encoding: quoted-printable Cc: freebsd-questions@freebsd.org Subject: Re: I have some questions about natd and firewall....^_^||| X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:50:27 -0000 =B8=B3=A6=F6=C0s writes: > Hello: > My English is not good. I am sorry about this first. ~_~ You made yourself clear. Better than "good enough." > My system: FreeBSD + IPFW + NAT > > Question 1: about NAT (in FreeBSD) > I built a "natd.conf" and it's contents are below: > redirect_address 192.168.0.1 140.115.10.22 > > I have 2 computers in the LAN: 192.168.0.200 and=20 > 192.168.0.201. > The redirect rule (above) will affect any connection whic= h=20 > destination is 140.115.10.22. > But, I don't want this rule to redirect the packets sent= =20 > from 192.168.0.200.(ie. This rule will affect all nodes inside the LAN bu= t=20 > 192.168.0.200) Can I make it? Yes. What you do is make sure that packets from that address don't get sent to the divert socket in your ipfw ruleset. For example, you could use a "skipto" rule before the divert rule. > Question 2: about Firewall (in FreeBSD) > Is there any argument in IPFW just like the function of t= he=20 > "redirect_address" in NAT can be used? If it is, I think it may can solve= =20 > the above problem. Not exactly. You can use a "fwd" rule, but the destination IP address won't be changed. The machine you forward to won't accept the packets because its address isn't 140.115.10.22. --=20 Lowell Gilbert, embedded/networking software engineer, Boston area http://be-well.ilk.org/~lowell/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 14:57:21 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 94C7316B109 for ; Wed, 31 May 2006 14:57:21 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms040pub.verizon.net (vms040pub.verizon.net [206.46.252.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3AFF143D55 for ; Wed, 31 May 2006 14:57:21 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.2] ([71.101.6.8]) by vms040.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J04006G4XJK4A54@vms040.mailsrvcs.net> for questions@FreeBSD.org; Wed, 31 May 2006 09:57:20 -0500 (CDT) Date: Wed, 31 May 2006 10:58:05 -0400 From: Joe In-reply-to: <20060531004426.GA36958@xor.obsecurity.org> To: Kris Kennaway Message-id: <447DAEFD.6030908@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 14:57:28 -0000 Kris Kennaway wrote: > On Tue, May 30, 2006 at 08:12:25PM -0400, Joe wrote: >> The .ko files have a Nov 3 2005 date, whereas the files in /boot >> including the kernel directory have a May 6 2006 date. I take it that >> Nov 3 means 6.0-RELEASE since the announcement was done on Nov 4. So, I >> guess I'm back to the question of how to do a binary upgrade from 6.0 to >> 6.1 (and particularly where is this documented). Should I attempt >> another sysinstall Upgrade? > > Show me > > sysctl kern.version > > and the output of a failed package fetch. Here is the output of "portupgrade -PP -v expat": ---> Session started at: Wed, 31 May 2006 09:21:25 -0400 ---> Checking for the latest package of 'textproc/expat2' ---> Found a package of 'textproc/expat2': /usr/ports/packages/All/expat-1.95.8_3.tbz (expat-1.95.8_3) ---> Fetching the package(s) for 'expat-2.0.0_1' (textproc/expat2) ---> Fetching expat-2.0.0_1 ++ Will try the following sites in the order named: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/ ---> Invoking a command: /usr/bin/fetch -o '/var/tmp/portupgrade8rSLsPlD/expat-2.0.0_1.tbz' 'ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tbz' fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tbz: File unavailable (e.g., file not found, no access) ** The command returned a non-zero exit status: 1 ** Failed to fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tbz ---> Invoking a command: /usr/bin/fetch -o '/var/tmp/portupgrade8rSLsPlD/expat-2.0.0_1.tgz' 'ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tgz' fetch: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tgz: File unavailable (e.g., file not found, no access) ** The command returned a non-zero exit status: 1 ** Failed to fetch ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/expat-2.0.0_1.tgz ** Failed to fetch expat-2.0.0_1 ---> Listing the results (+:done / -:ignored / *:skipped / !:failed) ! expat-2.0.0_1 (fetch error) ---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed ---> Fetching the latest package(s) for 'expat' (textproc/expat2) ---> Fetching expat ++ Will try the following sites in the order named: ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/ ---> Invoking a command: /usr/bin/fetch -o '/var/tmp/portupgradeKe8LJnQa/expat.tbz' 'ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/i386/packages-6.0-release/Latest/expat.tbz' /var/tmp/portupgradeKe8LJnQa/expat.tbz 0% of 137 kB 0 Bps/var/tmp/portupgradeKe8LJnQa/expat.tbz 2% of 137 kB 32 kBps/var/tmp/portupgradeKe8LJnQa/expat.tbz 98% of 137 kB 126 kBps/var/tmp/portupgradeKe8LJnQa/expat.tbz 100% of 137 kB 128 kBps ---> Downloaded as expat.tbz ---> Identifying the package /var/tmp/portupgradeKe8LJnQa/expat.tbz ---> Saved as /usr/ports/packages/All/expat-1.95.8_3.tbz ---> Listing the results (+:done / -:ignored / *:skipped / !:failed) + expat@ ---> Packages processed: 1 done, 0 ignored, 0 skipped and 0 failed ** Ignoring the package, which is the same version as is installed (1.95.8_3) ** No package available: textproc/expat2 ---> Found a package of 'textproc/expat2': /usr/ports/packages/All/expat-1.95.8_3.tbz (expat-1.95.8_3) ---> Located a package version 1.95.8_3 (/usr/ports/packages/All/expat-1.95.8_3.tbz) ---> Listing the results (+:done / -:ignored / *:skipped / !:failed) ! textproc/expat2 (expat-1.95.8_3) (package not found) ---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed ---> Session ended at: Wed, 31 May 2006 09:21:34 -0400 (consumed 00:00:08) I tried running another sysinstall Upgrade without installing X.org and now I didn't have any errors. 'kernels' was one of the distributions selected (by default) so I was wondering how *does* the kernel get swapped while it's still running. So I ran another sysinstall but this time from the 6.0-RELEASE CD-ROM. I chose 6.1-RELEASE from Options, FTP from ftp.freebsd.org as the source of the distribution, and didn't install X.org. It went OK as the previous one did, but upon reboot I still have a 6.0-RELEASE kernel. So I'm back to wondering how do those 6.0 .ko objects get replaced by 6.1 .ko's in the upgrade process ... Joe From owner-freebsd-questions@FreeBSD.ORG Wed May 31 15:02:54 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 38BC816B396 for ; Wed, 31 May 2006 15:02:54 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id D019F43D5F for ; Wed, 31 May 2006 15:02:46 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id AEF171A4E35; Wed, 31 May 2006 08:02:46 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 213B451450; Wed, 31 May 2006 11:02:46 -0400 (EDT) Date: Wed, 31 May 2006 11:02:45 -0400 From: Kris Kennaway To: Joe Message-ID: <20060531150245.GA64716@xor.obsecurity.org> References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> <447D834A.90000@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="yrj/dFKFPuw6o+aM" Content-Disposition: inline In-Reply-To: <447D834A.90000@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 15:02:59 -0000 --yrj/dFKFPuw6o+aM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, May 31, 2006 at 07:51:38AM -0400, Joe wrote: > Kris Kennaway wrote: > >On Tue, May 30, 2006 at 08:12:25PM -0400, Joe wrote: > >>The .ko files have a Nov 3 2005 date, whereas the files in /boot=20 > >>including the kernel directory have a May 6 2006 date. I take it that= =20 > >>Nov 3 means 6.0-RELEASE since the announcement was done on Nov 4. So, = I=20 > >>guess I'm back to the question of how to do a binary upgrade from 6.0 t= o=20 > >>6.1 (and particularly where is this documented). Should I attempt=20 > >>another sysinstall Upgrade? > > > >Show me=20 > > > >sysctl kern.version >=20 > kern.version: FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 > root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Yep, it's a 6.0-RELEASE kernel. I noticed that you didn't actually confirm whether /boot/kernel/kernel has the right date - only the "files in /boot including the kernel directory". Anyway, retry the binary upgrade as you say. Kris --yrj/dFKFPuw6o+aM Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfbAVWry0BWjoQKURAh7pAKD0mJ/aIEkRZ1JX22EmZ8tutdMY9ACghBHu bcQc/I3iPBJ+54habJtS99I= =ykA0 -----END PGP SIGNATURE----- --yrj/dFKFPuw6o+aM-- From owner-freebsd-questions@FreeBSD.ORG Wed May 31 16:16:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A2A1D16A737 for ; Wed, 31 May 2006 16:16:11 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id D249B43D73 for ; Wed, 31 May 2006 16:16:10 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so64161nzf for ; Wed, 31 May 2006 09:16:09 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=eFXJ3TAk1yA6w2gp0x5oO3aP9QHwXt7S0Xa7kHPm+IuLDyBWtauVsbEHblJmQsWLwGQypp2BoKt0pSww+yon7MhNtCrabUYSIk6hZz2rHUic6jqB+V+lQOXxYvlp2U1pE8Y1AJKJ4ensDRyfWRz4VzvYGp3fdB/Hs80P3sYy680= Received: by 10.36.104.20 with SMTP id b20mr299089nzc; Wed, 31 May 2006 09:16:09 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Wed, 31 May 2006 09:16:09 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 11:16:09 -0500 From: "Nikolas Britton" To: "Wojciech Puchar" In-Reply-To: <20060531142608.X91987@chylonia.3miasto.net> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060531142608.X91987@chylonia.3miasto.net> Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD notebook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 16:16:20 -0000 On 5/31/06, Wojciech Puchar wrote: > i would like to buy notebook to use with FreeBSD. Not new one, something > like Pentium 200-PII/500 with 64-128MB RAM will be OK, and there are lots > of them available cheaply. > > Unfortunately most of them have windows-only hardware. > Does anyone here using such machine successfully with FreeBSD. > > successfully means: > > 1) PCMCIA works > 2) disk works with DMA. > 3) USB works > 4) Network works (if present) > 5) X works. > 6) ACPI should be number 1 on your list and Just assume everything before 2001 is broken. 7) Onboard 100Mbit Ethernet is a must. 8) Working dri/drm video acceleration. 9) CD-Rom, that you can upgrade using standard slim-line parts. 10) At least PC100 RAM, 144pin SO-DIMMs. The first thing you'll want to do with your new used PI/PII laptop is upgrade it, because it's just too slow... I know... been there done that. So to save time and money your minimum target should be a PIII laptop. A Pentium 100 is so slow that it can't even play mp3's at the command line... Think about it... -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 16:47:10 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.ORG Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7193416A582 for ; Wed, 31 May 2006 16:47:10 +0000 (UTC) (envelope-from doug@safeport.com) Received: from pemaquid.safeport.com (pemaquid.safeport.com [209.31.154.17]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1342243D46 for ; Wed, 31 May 2006 16:47:09 +0000 (GMT) (envelope-from doug@safeport.com) Received: from localhost (localhost [127.0.0.1]) by pemaquid.safeport.com (8.13.4/8.12.11) with ESMTP id k4VGl8pa098389 for ; Wed, 31 May 2006 12:47:08 -0400 (EDT) (envelope-from doug@safeport.com) Date: Wed, 31 May 2006 12:47:08 -0400 (EDT) From: doug@safeport.com To: freebsd-questions@FreeBSD.ORG Message-ID: <20060531122500.U97498@pemaquid.safeport.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: Subject: More mergemaster errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 16:47:11 -0000 I did a fresh install from a 6.1 ISO and then used cvsup to get the the latest stable, approximately 17:00 EDT May 30,2006. I did a mergemaster -p at the appropriate spot to add the audit group. I think buildword complained about the missing group. Then I did: mergemaster -ai -m "." Processing started normally when it did 11,627 compiles ending with: /usr/src/sbin/ipf/ipf/../../../contrib/ipfilter/tools/ipf_y.y:1588: error: storage size of `logwords' isn't known *** Error code 1 Stop in /usr/src/sbin/ipf/ipf. *** Error code 1 Stop in /usr/src/sbin/ipf. *** Error code 1 Stop in /usr/src/sbin. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** FATAL ERROR: Cannot 'cd' to . and install files to the temproot environment The problem is the -m parameter. This construct worked in 4.x and in fact was required if doing NFS installs. Is this an error? _____ Douglas Denault http://www.safeport.com doug@safeport.com Voice: 301-469-8766 Fax: 301-469-0601 From owner-freebsd-questions@FreeBSD.ORG Wed May 31 17:38:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B06FB16AAAC for ; Wed, 31 May 2006 17:38:34 +0000 (UTC) (envelope-from nospam@mgedv.net) Received: from mail.mgedv.net (mail.mgedv.net [81.223.168.230]) by mx1.FreeBSD.org (Postfix) with ESMTP id 422AF43D76 for ; Wed, 31 May 2006 17:38:28 +0000 (GMT) (envelope-from nospam@mgedv.net) Received: from metis (sslint.my.loop [1.1.1.1]) by mail.my.loop (mgedv) with ESMTP id 3BAA445749 for ; Wed, 31 May 2006 19:38:08 +0200 (CEST) From: "no@spam@mgedv.net" To: Date: Wed, 31 May 2006 19:38:29 +0200 Message-ID: <000001c684d9$0791c080$01010101@avalon.lan> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 Thread-Index: AcaE2QZegp08yaNFQ3GpufuqsnM9EA== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Subject: HELP! booting usb-flashdisk fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 17:38:37 -0000 whenever i boot from my self-created bootable usb-stick, it fails with the following error from boot2: --------------------------------------------- Invalid label Invalid label No /boot/loader FreeBSD/i386 boot Default: 0:fd(0,a)/boot/kernel/kernel Invalid Label No /boot/kernel/kernel --------------------------------------------- i also tried the paths 0:da(0,a)/boot/kernel/kernel 0:ad(0,a)/boot/kernel/kernel without success. hardware used: (FreeBSD 6.1-RELEASE): Motherboard: GigaByte GA-8SIMLP Flash-Disk0: Kingston Data Traveler 2.0 256MB Flash-Disk1: Corsair Water-Resist Flash 512MB created a bootable usb-drive using: fdisk -BI /dev/da0 bsdlabel -w -B /dev/da0s1 newfs -m 0 -o space -n /dev/da0s1a then i installed the base-package and the GENERIC kernel into /dev/da0s1a, and ensured that the kernel is really to be found at /boot/kernel/kernel. i also tried this with the same errors: bsdlabel -w -B /dev/da0 newfs -m 0 -o space -n /dev/da0a (os installation the same as above) i tried this with both usb-sticks, both of them fail. trying them on a HP-Server works perfectly to the root- login. the bios supports booting from: USB-FDD, USB-ZIP, USB-CDROM and USB-HDD. i tried all of them. also, i set the boot-priorities to only boot HDD-0 and removed all other drives. obviously, no success. btw, booting from a real hdd/cdrom works. any really smart ideas on this? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 17:38:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C846F16AAB4 for ; Wed, 31 May 2006 17:38:39 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5710343D6D for ; Wed, 31 May 2006 17:38:32 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so80980nzf for ; Wed, 31 May 2006 10:38:32 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=VyeL5hluwsQaz8vVSP0EcvqnRaF9Sc4OOwkd4VenCi8504RnkXYhNWndcrkjduTc02Bk9jXKc2NaJy5t2V9gYweAnVfTETUmjPFGr5BOH9p+DdEVoLS6/D/2ezTRJvuiTRZ1xGUfdghJKiWaJ70ohxFZzE9DGixkzU3wReXj1dU= Received: by 10.36.251.19 with SMTP id y19mr207304nzh; Wed, 31 May 2006 10:38:32 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Wed, 31 May 2006 10:38:32 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 12:38:32 -0500 From: "Nikolas Britton" To: "doug@safeport.com" In-Reply-To: <20060531122500.U97498@pemaquid.safeport.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060531122500.U97498@pemaquid.safeport.com> Cc: freebsd-questions@freebsd.org Subject: Re: More mergemaster errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 17:38:47 -0000 On 5/31/06, doug@safeport.com wrote: > I did a fresh install from a 6.1 ISO and then used cvsup to get the the latest > stable, approximately 17:00 EDT May 30,2006. > > I did a mergemaster -p at the appropriate spot to add the audit group. I think The audit group is in 6.1 so why are you doing that?? > buildword complained about the missing group. Then I did: > > mergemaster -ai -m "." > > Processing started normally when it did 11,627 compiles ending with: > A fresh install of 6.1-RELEASE and then a src upgrade to 6-STABLE? Your doing something wrong. make buildworld make buildkernel make installkernel reboot mergemaster -p make installworld mergemaster reboot -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 17:44:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1A3A916A9E7; Wed, 31 May 2006 17:44:55 +0000 (UTC) (envelope-from jdow@earthlink.net) Received: from elasmtp-banded.atl.sa.earthlink.net (elasmtp-banded.atl.sa.earthlink.net [209.86.89.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4C84143DA5; Wed, 31 May 2006 17:43:57 +0000 (GMT) (envelope-from jdow@earthlink.net) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=t47GEBKK1tozBsHugPwlDk4hG3FSH+jgA4pqc7qKulJeewf6Rs5RBN6WEeWkePI7; h=Received:Message-ID:From:To:Cc:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-ELNK-Trace:X-Originating-IP; Received: from [71.116.167.175] (helo=Wednesday) by elasmtp-banded.atl.sa.earthlink.net with asmtp (Exim 4.34) id 1FlUjX-0006iK-Q4; Wed, 31 May 2006 13:43:52 -0400 Message-ID: <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> From: "jdow" To: , "mehmet gogebakan" References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> <20060531131530.GA41305@owl.midgard.homeip.net> Date: Wed, 31 May 2006 10:43:50 -0700 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-ELNK-Trace: bb89ecdb26a8f9f24d2b10475b571120857310329886e9d55d73ae3c4ed36155ee1cadf5ceabb0d8350badd9bab72f9c350badd9bab72f9c350badd9bab72f9c X-Originating-IP: 71.116.167.175 Cc: questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 17:44:56 -0000 From: "Erik Trulsson" > On Wed, May 31, 2006 at 03:49:42PM +0300, mehmet gogebakan wrote: >> i would like to install 6.1-RELEASE to my computer , configuration is: >> >> 128 MB SDRAM >> LG cdrom 52x >> 8 MB Grafic card >> 40 gb hd >> p3 800 mhz processor >> azza motherboard >> >> could you please tell me whether this configuration is suitable, if not >> tell me the minimum configuration it should be.. > > Running 6.1 on that should not be any problem. > > In fact you could take a computer with only half the RAM of the above, half > the disk space, and half the CPU speed, and still not have a problem running > FreeBSD 6.1. I would suppose you could run it in an even smaller machine if you had the patience. (After all you CAN run Windows XP on a 100MHz machine with 32 megs of ram if you are REALLY REALLY patient.) The above machine might benefit from additional ram if he intends to do mail filtering on the machine. Tools like SpamAssassin eat ram for lunch and leave very little for dinner. {^_-} Joanne From owner-freebsd-questions@FreeBSD.ORG Wed May 31 17:44:55 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1A3A916A9E7; Wed, 31 May 2006 17:44:55 +0000 (UTC) (envelope-from jdow@earthlink.net) Received: from elasmtp-banded.atl.sa.earthlink.net (elasmtp-banded.atl.sa.earthlink.net [209.86.89.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4C84143DA5; Wed, 31 May 2006 17:43:57 +0000 (GMT) (envelope-from jdow@earthlink.net) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=t47GEBKK1tozBsHugPwlDk4hG3FSH+jgA4pqc7qKulJeewf6Rs5RBN6WEeWkePI7; h=Received:Message-ID:From:To:Cc:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE:X-ELNK-Trace:X-Originating-IP; Received: from [71.116.167.175] (helo=Wednesday) by elasmtp-banded.atl.sa.earthlink.net with asmtp (Exim 4.34) id 1FlUjX-0006iK-Q4; Wed, 31 May 2006 13:43:52 -0400 Message-ID: <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> From: "jdow" To: , "mehmet gogebakan" References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> <20060531131530.GA41305@owl.midgard.homeip.net> Date: Wed, 31 May 2006 10:43:50 -0700 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-ELNK-Trace: bb89ecdb26a8f9f24d2b10475b571120857310329886e9d55d73ae3c4ed36155ee1cadf5ceabb0d8350badd9bab72f9c350badd9bab72f9c350badd9bab72f9c X-Originating-IP: 71.116.167.175 Cc: questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 17:44:58 -0000 From: "Erik Trulsson" > On Wed, May 31, 2006 at 03:49:42PM +0300, mehmet gogebakan wrote: >> i would like to install 6.1-RELEASE to my computer , configuration is: >> >> 128 MB SDRAM >> LG cdrom 52x >> 8 MB Grafic card >> 40 gb hd >> p3 800 mhz processor >> azza motherboard >> >> could you please tell me whether this configuration is suitable, if not >> tell me the minimum configuration it should be.. > > Running 6.1 on that should not be any problem. > > In fact you could take a computer with only half the RAM of the above, half > the disk space, and half the CPU speed, and still not have a problem running > FreeBSD 6.1. I would suppose you could run it in an even smaller machine if you had the patience. (After all you CAN run Windows XP on a 100MHz machine with 32 megs of ram if you are REALLY REALLY patient.) The above machine might benefit from additional ram if he intends to do mail filtering on the machine. Tools like SpamAssassin eat ram for lunch and leave very little for dinner. {^_-} Joanne From owner-freebsd-questions@FreeBSD.ORG Wed May 31 18:08:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C0C8216B131 for ; Wed, 31 May 2006 18:08:49 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.200]) by mx1.FreeBSD.org (Postfix) with ESMTP id 43EDA43D73 for ; Wed, 31 May 2006 18:08:49 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so86724nzf for ; Wed, 31 May 2006 11:08:48 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=cZkjSgfDLxsgtryOU+JvBzoQe0BOEJ0DQ4lcGqEIs8coK30z7YRrI0iiP1554bOcxtniqYjSxjTBzrTVjdXZTWROV/2vAgzeZUn1/p92qj8eIDz7RMSG7uPmr8YPxK3UXtSlJ2fP+5zQJZxJIH7BlYMWHF+bA1jLNXFf995bxDk= Received: by 10.36.104.20 with SMTP id b20mr422900nzc; Wed, 31 May 2006 11:08:48 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Wed, 31 May 2006 11:08:48 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 13:08:48 -0500 From: "Nikolas Britton" To: "Giorgos Keramidas" In-Reply-To: <20060531145106.GA56445@gothmog.pc> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <012001c684ae$cbecaf60$0207a8c0@P800> <447D9BFC.9080304@daleco.biz> <20060531145106.GA56445@gothmog.pc> Cc: freebsd-questions@freebsd.org, Philip Radford Subject: Re: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 18:08:50 -0000 On 5/31/06, Giorgos Keramidas wrote: > On 2006-05-31 08:37, Kevin Kinsey wrote: > >Philip Radford wrote: > >>Hi All, > >> I have just installed FreeBSD 5.4 on a server with two hard disks. > > > > Cool ... :) > > Nice :) > No Comment. > >> I have access to all my partitions on the first disk :- > >> > >> /dev/ad0s1a - / > >> /dev/ad0s1e - /tmp > >> /dev/ad0s1f - /usr > >> /dev/ad0s1d - /var > >> > >> How do I go about mounting to the second drive which I > >> assume would start with /dev/ad1* > > > > $ dmesg | grep ad > > Another way is through atacontrol: > > # atacontrol list A simple 'ls /dev/ad*' should suffice in most circumstances. -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 18:10:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0C6B216AE2B for ; Wed, 31 May 2006 18:10:03 +0000 (UTC) (envelope-from efrenba@yahoo.es) Received: from web25508.mail.ukl.yahoo.com (web25508.mail.ukl.yahoo.com [217.12.10.154]) by mx1.FreeBSD.org (Postfix) with SMTP id A5CC643D77 for ; Wed, 31 May 2006 18:10:01 +0000 (GMT) (envelope-from efrenba@yahoo.es) Received: (qmail 82974 invoked by uid 60001); 31 May 2006 18:09:53 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.es; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=Yh7bLWFAwWng3UFPRQOs5ex/lwC776pTM/yDxHWxlbs4qG1IQ96Sx1Wg/RWtIgpxHCgwb0ItTO4lj5V+y+zMnFaS7TCWLySf0+HT3aZ6MWcCc3ZpsldGvCA/o7A0iNIOfqsLF16ieNkSALYoYm7I9vW4AQmXwVqMAGoZrrjVNwQ= ; Message-ID: <20060531180952.82971.qmail@web25508.mail.ukl.yahoo.com> Received: from [200.55.168.195] by web25508.mail.ukl.yahoo.com via HTTP; Wed, 31 May 2006 20:09:52 CEST Date: Wed, 31 May 2006 20:09:52 +0200 (CEST) From: Efren Bravo To: freeBSD MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Subject: courier-imap pop3 help! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 18:10:05 -0000 Hi, I want to authenticate the client's user/pass against the file /etc/passwd, for that reason I put authmodulelist="authpwd" inside the file /usr/local/etc/authlib/authdaemonrc but I get only this error: May 31 13:33:33 gw authdaemond: modules="authpwd", daemons=5 May 31 13:33:33 gw authdaemond: Installing libauthpwd May 31 13:33:33 gw authdaemond: Shared object "libauthpwd.so" not found, required by "authdaemond" May 31 13:33:51 gw pop3d: LOGIN FAILED, user=efrenba, ip=[10.10.10.5] The file libauthpwd.so doesn't exist in my system then I changed the authmodulelist param to authpam but it didn't work. /etc/pam.d/pop3 lines: auth required pam_unix.so no_warn try_first_pass account required pam_unix.so no_warn try_first_pass session required pam_permit.so What is going wrong? Thanks, Efren Bravo. ----- Fight back spam! Download the Blue Frog. http://www.bluesecurity.com/register/s?user=ZWZyZW5iYQ%3D%3D __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.yahoo.es From owner-freebsd-questions@FreeBSD.ORG Wed May 31 18:23:12 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5039316AE41 for ; Wed, 31 May 2006 18:23:12 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33305.mail.mud.yahoo.com (web33305.mail.mud.yahoo.com [68.142.206.120]) by mx1.FreeBSD.org (Postfix) with SMTP id 9877E43D6D for ; Wed, 31 May 2006 18:23:09 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 41994 invoked by uid 60001); 31 May 2006 18:23:08 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=mNUkJFJ3Hxx47ap8VUt9bily2SBd7x/+jgxTCCwEqeWqulzMurDTcXtgRXX4SIVXdRReka615Cd5dSzBCJgqJSbL2lJEPQg33LkME1L9LJnBJa+Gf6vNQsDpk47m9JhlK/JN2ZP9RF1ZWMr5jnS12eGjiwDeU4rAvAJwL7J1X0c= ; Message-ID: <20060531182308.41992.qmail@web33305.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33305.mail.mud.yahoo.com via HTTP; Wed, 31 May 2006 11:23:08 PDT Date: Wed, 31 May 2006 11:23:08 -0700 (PDT) From: Danial Thom To: YTResearch , Heinrich Rebehn In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 18:23:17 -0000 The intel cards that use the EM driver are the best performing cards in FreeBSD that we've tested. We've test cards made by the same company that use the broadcom controllers and the intel cards are substantially better (ie use less CPU passing the same amount of traffic). Be careful using on-board controllers. Usually vendors, for some reason, don't wire them to the pci-x bus. Most supermicro boards wire the em controllers to the 32bit/33mhz bus and the tyan and supermicro opteron boards we've tested wire the broadcoms to a shared 1x PCI-E, both of which will not only give you poor performance, but are not capable of running full gigabit rates. DT --- YTResearch wrote: > We are running the S4882-D and it has the > Broadcom GB dual adapter > built in (recognized as Gigabit Ethernet, > ASIC rev. 0x2003>). It seems to work without > problems and we've run > both to two different networks (right now > running only one). We are > connecting at 100baseT so I don't have > experience running at GB > speeds. I'm not detecting any network > bottlenecks at all and I've > been watching very carefully due to stability > problems. We are > running 6.0 RELEASE amd64 SMP 4/8 CPUs 8 GB. > > I don't know if the 2882 is identical in > architecture but if so, > strongly recommend NOT using 6.0 and trying > 6.1. We are panicing > daily and experience about 4 minutes a day > downtime. Never have had > FreeBSD be so unstable in 7 years. > > On May 31, 2006, at 2:22 AM, Heinrich Rebehn > wrote: > > > Hi list, > > > > can anyone recommend a 1000BASE-SX ethernet > adapter for PCI-X slot, > > that > > is well supported by FreeBSD-amd64?. > > I want to use it in a TYAN Thunder K8SD Pro > (S2882-D) board. > > > > TIA, > > > > Heinrich Rebehn > > > > University of Bremen > > Physics / Electrical and Electronics > Engineering > > - Department of Telecommunications - > > > > Phone : +49/421/218-4664 > > Fax : -3341 > > > _______________________________________________ > > freebsd-amd64@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 > > To unsubscribe, send any mail to > "freebsd-amd64- > > unsubscribe@freebsd.org" > > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "freebsd-questions- > > unsubscribe@freebsd.org" > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Wed May 31 18:29:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7F0B616AE4C for ; Wed, 31 May 2006 18:29:19 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0B5D343D48 for ; Wed, 31 May 2006 18:29:18 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k4VISi1B008324; Wed, 31 May 2006 14:28:44 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k4VISicf008323; Wed, 31 May 2006 14:28:44 -0400 (EDT) From: Jerry McAllister Message-Id: <200605311828.k4VISicf008323@clunix.cl.msu.edu> To: nikolas.britton@gmail.com (Nikolas Britton) Date: Wed, 31 May 2006 14:28:44 -0400 (EDT) In-Reply-To: X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Giorgos Keramidas , freebsd-questions@freebsd.org, Philip Radford Subject: Re: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 18:29:28 -0000 > > On 5/31/06, Giorgos Keramidas wrote: > > On 2006-05-31 08:37, Kevin Kinsey wrote: > > >Philip Radford wrote: > > >>Hi All, > > >> I have just installed FreeBSD 5.4 on a server with two hard disks. > > > Cool ... :) > > Nice :) > No Comment. > > > >> I have access to all my partitions on the first disk :- > > >> > > >> /dev/ad0s1a - / > > >> /dev/ad0s1e - /tmp > > >> /dev/ad0s1f - /usr > > >> /dev/ad0s1d - /var > > >> > > >> How do I go about mounting to the second drive which I > > >> assume would start with /dev/ad1* > > > > > > $ dmesg | grep ad > > > > Another way is through atacontrol: > > # atacontrol list I am not sure how big a question you are asking here. If it is just what the dev name will be, then others have answered that. Just look in /dev for ad* or look in dmesg for ad** devices being recognized, etc. But, maybe you mean the whole process of getting the new drive built, mounted and usable. Is that what you are asking? If so, the first comment is 'the FreeBSD Handbook is your Friend'. The general outline is: fdisk(8) - Make at least one FreeBSD slice on it bsdlabel(8) - Make at least one partition in each slice newfs(8) - Build a filesystem on each partition created mkdir /newdska - create mount points for each partition to be mounted edit /etc/fstab to add mount definitions - presuming you want it mounted - whenever you boot. Something like: /dev/ad1s1a /newdsk ufs rw 2 2 mount /newdsk - (or just 'mount -a' will do it) Mount the partition You can use sysinstall to do all this if you are squeemish about doing it youself. But is really isn't that hard and you will learn a little more about how you disk system is put together. Have fun, ////jerry > -- > BSD Podcasts @: > http://bsdtalk.blogspot.com/ > http://freebsdforall.blogspot.com/ > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 18:35:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D95F716AF81 for ; Wed, 31 May 2006 18:35:57 +0000 (UTC) (envelope-from don.hinton@vanderbilt.edu) Received: from mailgate02.smtp.vanderbilt.edu (mailgate02.smtp.Vanderbilt.Edu [129.59.1.72]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9DEFB43D55 for ; Wed, 31 May 2006 18:35:56 +0000 (GMT) (envelope-from don.hinton@vanderbilt.edu) Received: from smtp09.smtp.vanderbilt.edu (smtp09.smtp.Vanderbilt.Edu [129.59.1.239]) by mailgate02.smtp.vanderbilt.edu (8.13.6/8.13.6) with ESMTP id k4VIZtoC016259 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Wed, 31 May 2006 13:35:55 -0500 Received: from smtp09.smtp.vanderbilt.edu (localhost [127.0.0.1]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9C+d3.7.9) with ESMTP id k4VIZtYe024744 for ; Wed, 31 May 2006 13:35:55 -0500 (CDT) Received: from a135185.n1.vanderbilt.edu (A135185.N1.Vanderbilt.Edu [129.59.135.185]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9.3B+d3.7.9) with ESMTP id k4VIZs5h024741 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Wed, 31 May 2006 13:35:55 -0500 (CDT) Content-Class: urn:content-classes:message From: Don Hinton Organization: ISIS To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 13:35:53 -0500 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605311335.54004.don.hinton@vanderbilt.edu> X-Proofpoint-Virus-Version: vendor=fsecure engine=4.64.4171:2.3.9, 1.2.33, 4.0.164 definitions=2006-05-31_02:2006-05-31, 2006-05-31, 2006-05-31 signatures=0 X-PPS: No, score=0 Subject: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 18:36:03 -0000 Hi: When trying to upgrade Flash, I ran into the following in the UPDATING file: 20060408: AFFECTS: users of www/linux-flashplugin* AUTHOR: hrs@FreeBSD.org These ports have been removed because the End User License Agreement explicitly forbids to run the Flash Player on FreeBSD. For more details, see http://www.macromedia.com/shockwave/download/license/desktop/. So I contacted Adobe, see below, and according to the customer service rep, Astrid C. Villanueva, there is not problem with using Flash on FreeBSD, it's just not supported. Therefore, would it be possible to add it back to the ports? thanks... don ---------- Forwarded Message ---------- Subject: Macromedia Customer Service Request [8564611] Date: Wednesday 31 May 2006 13:33 From: "Service" To: "don hinton" Hi again Don, Thank you for writing back and for the clarification provided. I understand your feedback on the compatibility of Flash Player on FreeBSD. Please note that Flash Player is not supported in FreeBSD, thus it not mentioned on the End User License Agreement that Flash Player can be downloaded and installed on the operating system. It is not that the web player is prohibited in FreeBSD, but the operating system itself is not compatible with Player. Please note that it is your option whether to install Flash Player on your FreeBSD; however, please note that we cannot provide you with any technical support, warranties or remedies for the software, although it is clearly stated on the End User License Agreement, the only authorized operating systems where you may download and install Flash Player. To view the System Requirements of Flash Player, you may go to: http://www.macromedia.com/software/flashplayer/productinfo/systemreqs/ In connection with this, if you would like to make suggestions or comments on how we can improve future versions of our software, or to report possible "bugs" in our current versions, please visit: http://www.macromedia.com/support/email/wishform/ Your comments, suggestions, and ideas for improvements are very important to us. We appreciate you taking the time to send us this information. I hope this additional information helps. Thank you for your patience on this matter. Should you have further concerns, feel free to write us back. Regards, Astrid C. Villanueva Customer Service Macromedia, now part of Adobe Systems ------------------------------------------------------------------------ Please use your incident number 8564611 in any correspondence with us. Customer Service at Macromedia, now part of Adobe Systems http://www.macromedia.com/support/service/ Note concerning Attachments: Please do not send attachments in a reply to this email. Instead, can you please contact the support agent to make arrangements to send your files. Thank you. ------------------------------------------------------- -- Don Hinton tel: 615.480.5667 ISIS, Vanderbilt University skype: donhinton http://people.vanderbilt.edu/~don.hinton/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 19:00:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C7E6D16AE21 for ; Wed, 31 May 2006 19:00:53 +0000 (UTC) (envelope-from reitz@eecs.cwru.edu) Received: from beta.eecs.cwru.edu (beta.EECS.CWRU.Edu [129.22.150.110]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3E04C43D46 for ; Wed, 31 May 2006 19:00:53 +0000 (GMT) (envelope-from reitz@eecs.cwru.edu) Received: from brak ([::ffff:129.22.151.63]) (TLS: TLSv1/SSLv3,168bits,DES-CBC3-SHA) by beta.eecs.cwru.edu with esmtp; Wed, 31 May 2006 15:00:52 -0400 id 000ABF35.447DE7E4.00006FE1 Date: Wed, 31 May 2006 14:59:40 -0400 (EDT) From: Andy Reitz X-X-Sender: reitz@brak To: Bill Moran In-Reply-To: <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> Message-ID: References: <20060531230821.T62075@a2.scoop.co.nz> <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Andrew McNaughton , freebsd-questions@freebsd.org Subject: Re: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 19:00:58 -0000 On Wed, 31 May 2006, Bill Moran wrote: > On Wed, 31 May 2006 23:22:16 +1200 (NZST) > Andrew McNaughton wrote: > > > > portaudit gives me alerts when security issues arise in installed ports, > > and portversion keeps me abreast of less critical updates. It's a whole > > lot easier than the old situation of tracking the security lists every > > day. > > > > Is there a comparably easy way to track available and critical upgrades > > for the FreeBSD core? > > The canonical way to do this is to subscribe to announce@ and/or > security-announce@freebsd.org. Very low traffic, but important > stuff you need to know comes through those channels. There is also an RSS feed, which I prefer over the mailing list: http://www.freebsd.org/security/advisories.rdf -Andy. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 19:30:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3029A16BBC7 for ; Wed, 31 May 2006 19:30:25 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4267543D81 for ; Wed, 31 May 2006 19:30:08 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k4VJTwnt043518; Wed, 31 May 2006 14:29:59 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447DEEB1.4060603@daleco.biz> Date: Wed, 31 May 2006 14:29:53 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Nikolas Britton References: <012001c684ae$cbecaf60$0207a8c0@P800> <447D9BFC.9080304@daleco.biz> <20060531145106.GA56445@gothmog.pc> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Giorgos Keramidas , freebsd-questions@freebsd.org Subject: Re: Mounting to a second hard disk X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 19:30:35 -0000 Nikolas Britton wrote: > On 5/31/06, Giorgos Keramidas wrote: >> On 2006-05-31 08:37, Kevin Kinsey wrote: >> >Philip Radford wrote: >> >>Hi All, >> >> I have just installed FreeBSD 5.4 on a server with two hard disks. >> > >> > Cool ... :) >> >> Nice :) >> > > No Comment. > >> >> I have access to all my partitions on the first disk :- >> >> >> >> /dev/ad0s1a - / >> >> /dev/ad0s1e - /tmp >> >> /dev/ad0s1f - /usr >> >> /dev/ad0s1d - /var >> >> >> >> How do I go about mounting to the second drive which I >> >> assume would start with /dev/ad1* >> > >> > $ dmesg | grep ad >> >> Another way is through atacontrol: >> >> # atacontrol list > > A simple 'ls /dev/ad*' should suffice in most circumstances. But if the disk hasn't been partitioned and sliced, the only entry will be for the disk itself, which will be not be able to be mounted. The OP wondered why adNs1n wasn't there, and the line from dmesg gives more information and identifies the disk, positively. And, face it, if it 'twere you or I, we'd probably have done both (or all three) by now. Philip said he had now noticed handbook 17.3, so we'll leave him alone until he has _another_ question ;-). KDK -- No good deed goes unpunished. -- Clare Boothe Luce From owner-freebsd-questions@FreeBSD.ORG Wed May 31 19:31:46 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9DECE16B2C0 for ; Wed, 31 May 2006 19:31:46 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp01.lnh.mail.rcn.net (smtp01.lnh.mail.rcn.net [207.172.4.11]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3A63A43D55 for ; Wed, 31 May 2006 19:31:46 +0000 (GMT) (envelope-from roberthuff@rcn.com) Received: from 209-6-203-77.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.203.77]) by smtp01.lnh.mail.rcn.net with ESMTP; 31 May 2006 15:32:58 -0400 X-IronPort-AV: i="4.05,194,1146456000"; d="scan'208"; a="214133337:sNHT33223944" From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <17533.61128.28295.514215@jerusalem.litteratus.org> Date: Wed, 31 May 2006 15:30:16 -0400 To: questions@freebsd.org X-Mailer: VM 7.17 under 21.5 (beta27) "fiddleheads" XEmacs Lucid Cc: Subject: using bsdlabel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 19:31:58 -0000 I've never used bsdlabel before; would someone please confirm I've got this right? Status quo: huff@>> bsdlabel da0s1 # /dev/da0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 1024000 0 4.2BSD 0 0 0 b: 2097152 1024000 swap c: 8916012 0 unused 0 0 # "raw" part, don't edit d: 2097152 3121152 4.2BSD 0 0 0 As I understand it, if I run this: huff@>> bsdlabel -w da0s1 -f /label.new where /label.new has: # /dev/da0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 1024000 0 4.2BSD 0 0 0 b: 2097152 1024000 swap c: 8916012 0 unused 0 0 # "raw" part, don't edit d: 2097152 3121152 4.2BSD 0 0 0 e: 3697708 5128304 4.2BSD 0 0 0 this will allocate the rest of the slice to partition 'e'. (And we're ready to newfs.) Robert Huff From owner-freebsd-questions@FreeBSD.ORG Wed May 31 19:39:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 91C2D16A93E for ; Wed, 31 May 2006 19:39:47 +0000 (UTC) (envelope-from doug@safeport.com) Received: from pemaquid.safeport.com (pemaquid.safeport.com [209.31.154.17]) by mx1.FreeBSD.org (Postfix) with ESMTP id EA8C343D55 for ; Wed, 31 May 2006 19:39:45 +0000 (GMT) (envelope-from doug@safeport.com) Received: from localhost (localhost [127.0.0.1]) by pemaquid.safeport.com (8.13.4/8.12.11) with ESMTP id k4VJdWoc005025; Wed, 31 May 2006 15:39:33 -0400 (EDT) (envelope-from doug@safeport.com) Date: Wed, 31 May 2006 15:39:32 -0400 (EDT) From: doug@safeport.com To: Nikolas Britton In-Reply-To: Message-ID: <20060531153314.X97498@pemaquid.safeport.com> References: <20060531122500.U97498@pemaquid.safeport.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-questions@freebsd.org Subject: Re: More mergemaster errors X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 19:39:56 -0000 mergemaster -ai -m"." fails mergemaster -ai works I did something wrong in using -m"." which should be redundant since the pwd was /usr/src. Now that I think about it - that was the change because in mergemaster we have : SOURCEDIR=${SOURCEDIR:-/usr/src/etc} : I suspect the default used to be /usr/src and the etc was a constant. I am slow but several 100 or so installs, I got the drill down okay On Wed, 31 May 2006, Nikolas Britton wrote: > On 5/31/06, doug@safeport.com wrote: > > I did a fresh install from a 6.1 ISO and then used cvsup to get the the latest > > stable, approximately 17:00 EDT May 30,2006. > > > > I did a mergemaster -p at the appropriate spot to add the audit group. I think > > The audit group is in 6.1 so why are you doing that?? > > > buildword complained about the missing group. Then I did: > > > > mergemaster -ai -m "." > > > > Processing started normally when it did 11,627 compiles ending with: > > > > > A fresh install of 6.1-RELEASE and then a src upgrade to 6-STABLE? > Your doing something wrong. > > make buildworld > make buildkernel > make installkernel > reboot > mergemaster -p > make installworld > mergemaster > reboot > > > -- > BSD Podcasts @: > http://bsdtalk.blogspot.com/ > http://freebsdforall.blogspot.com/ > _____ Douglas Denault http://www.safeport.com doug@safeport.com Voice: 301-469-8766 Fax: 301-469-0601 From owner-freebsd-questions@FreeBSD.ORG Wed May 31 19:43:07 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DC64E16A64C for ; Wed, 31 May 2006 19:43:07 +0000 (UTC) (envelope-from keramida@ceid.upatras.gr) Received: from igloo.linux.gr (igloo.linux.gr [62.1.205.36]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1A84243D46 for ; Wed, 31 May 2006 19:43:05 +0000 (GMT) (envelope-from keramida@ceid.upatras.gr) Received: from gothmog.pc (host5.bedc.ondsl.gr [62.103.39.229]) (authenticated bits=128) by igloo.linux.gr (8.13.6/8.13.6/Debian-1) with ESMTP id k4VJgl2W009900 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 31 May 2006 22:42:49 +0300 Received: from gothmog.pc (gothmog [127.0.0.1]) by gothmog.pc (8.13.6/8.13.6) with ESMTP id k4VJixi7058339; Wed, 31 May 2006 22:44:59 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Received: (from giorgos@localhost) by gothmog.pc (8.13.6/8.13.6/Submit) id k4VJixla058338; Wed, 31 May 2006 22:44:59 +0300 (EEST) (envelope-from keramida@ceid.upatras.gr) Date: Wed, 31 May 2006 22:44:59 +0300 From: Giorgos Keramidas To: Robert Huff Message-ID: <20060531194459.GB58198@gothmog.pc> References: <17533.61128.28295.514215@jerusalem.litteratus.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <17533.61128.28295.514215@jerusalem.litteratus.org> X-Hellug-MailScanner: Found to be clean X-Hellug-MailScanner-SpamCheck: not spam, SpamAssassin (score=-3.407, required 5, autolearn=not spam, ALL_TRUSTED -1.80, AWL 0.79, BAYES_00 -2.60, DNS_FROM_RFC_ABUSE 0.20) X-Hellug-MailScanner-From: keramida@ceid.upatras.gr X-Spam-Status: No Cc: freebsd-questions@freebsd.org Subject: Re: using bsdlabel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 19:43:13 -0000 On 2006-05-31 15:30, Robert Huff wrote: > > I've never used bsdlabel before; would someone please confirm > I've got this right? > Status quo: > > huff@>> bsdlabel da0s1 > # /dev/da0s1: > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 1024000 0 4.2BSD 0 0 0 > b: 2097152 1024000 swap > c: 8916012 0 unused 0 0 # "raw" part, don't edit > d: 2097152 3121152 4.2BSD 0 0 0 > > As I understand it, if I run this: > > huff@>> bsdlabel -w da0s1 -f /label.new > > where /label.new has: > > # /dev/da0s1: > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 1024000 0 4.2BSD 0 0 0 > b: 2097152 1024000 swap > c: 8916012 0 unused 0 0 # "raw" part, don't edit > d: 2097152 3121152 4.2BSD 0 0 0 > e: 3697708 5128304 4.2BSD 0 0 0 > > this will allocate the rest of the slice to partition 'e'. > (And we're ready to newfs.) Yes, this looks ok :) The 'e' partition can only start *after* the 'd' partition, so it should have an offset of: 'd' start + 'd' size --------- -------- 3121152 + 2097152 = 5218304 The 'rest' of the disk is: 'c' size - 'e' start -------- --------- 8916012 - 5218304 = 3697708 From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:05:37 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B636D16A741 for ; Wed, 31 May 2006 20:05:37 +0000 (UTC) (envelope-from efrenba@yahoo.es) Received: from web25508.mail.ukl.yahoo.com (web25508.mail.ukl.yahoo.com [217.12.10.154]) by mx1.FreeBSD.org (Postfix) with SMTP id D680243D53 for ; Wed, 31 May 2006 20:05:34 +0000 (GMT) (envelope-from efrenba@yahoo.es) Received: (qmail 31818 invoked by uid 60001); 31 May 2006 20:05:28 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.es; h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=wIfL1GW3IwLoNY+Ie7s0AuzfUSsck3Jm7wktAH5CXGprItrnd47ddScwXtJwAZH5+dzG0Sc6imve+OGNbI9qVWPONIr8ykTx4E4qQYzl4HjbvKumRdkDTzg3ukH2Gk4Wmr9l2/IZMrj1r5XPuo5RObNYiPuZXE/SEqBRuZixRSw= ; Message-ID: <20060531200528.31816.qmail@web25508.mail.ukl.yahoo.com> Received: from [200.55.168.195] by web25508.mail.ukl.yahoo.com via HTTP; Wed, 31 May 2006 22:05:28 CEST Date: Wed, 31 May 2006 22:05:28 +0200 (CEST) From: Efren Bravo To: freeBSD In-Reply-To: <20060531180952.82971.qmail@web25508.mail.ukl.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Subject: RE: courier-imap pop3 help! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:05:40 -0000 Hi, I almost get it. The new problem is I configured the procmail to use maildir in the path /usr/zdir/$LOGNAME/{cur/new/tmp}. /usr/local/etc/courier-imap/pop3d: if MAILDIRPATH=/usr/zdir/ I get this error: May 31 15:27:12 gw pop3d: scancur opendir("cur"): No such file or directory if MAILDIRPATH=/usr/zdir/efrenba/ I can get the mails. How could I tell to pop3d that looks at the mails in the path /usr/zdir/USER/{cur/new/tmp}? > I want to authenticate the client's user/pass > against the file /etc/passwd, for that reason I > put authmodulelist="authpwd" inside the file > /usr/local/etc/authlib/authdaemonrc but I get > only this error: > > May 31 13:33:33 gw authdaemond: > modules="authpwd", daemons=5 > May 31 13:33:33 gw authdaemond: Installing > libauthpwd > May 31 13:33:33 gw authdaemond: Shared object > "libauthpwd.so" not found, required by > "authdaemond" > May 31 13:33:51 gw pop3d: LOGIN FAILED, > user=efrenba, ip=[10.10.10.5] > > The file libauthpwd.so doesn't exist in my > system > then I changed the authmodulelist param to > authpam but it didn't work. > > /etc/pam.d/pop3 lines: > auth required pam_unix.so no_warn > try_first_pass > account required pam_unix.so no_warn > try_first_pass > session required pam_permit.so > > > What is going wrong? > > Thanks, __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.yahoo.es From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:09:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DA6A116B2EB for ; Wed, 31 May 2006 20:09:56 +0000 (UTC) (envelope-from nocturnal@swehack.se) Received: from mail2.swebase.com (mail2.swebase.com [82.99.44.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3BE7A43D45 for ; Wed, 31 May 2006 20:09:55 +0000 (GMT) (envelope-from nocturnal@swehack.se) Received: from [81.170.248.62] by mail2.swebase.com (MDaemon.PRO.v8.1.0.R) with ESMTP id 09-md50000033940.msg for ; Wed, 31 May 2006 22:08:20 +0200 Message-ID: <447DF7B5.6090507@swehack.se> Date: Wed, 31 May 2006 22:08:21 +0200 From: nocturnal User-Agent: Thunderbird 1.5 (X11/20060409) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Authenticated-Sender: nocturnal@swehack.se X-MDRemoteIP: 81.170.248.62 X-Return-Path: nocturnal@swehack.se X-MDaemon-Deliver-To: freebsd-questions@freebsd.org X-Spam-Checker-Version: SpamAssassin 3.0.4 (2005-06-05) on mail2 X-Spam-Status: No, score=0.9 required=5.0 tests=PLING_QUERY autolearn=disabled version=3.0.4 X-Spam-Level: X-Spam-Processed: mail2.swebase.com, Wed, 31 May 2006 22:08:21 +0200 Subject: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:10:00 -0000 Hi Not sure if this is already posted or already reported as a bug because i honestly don't have time for those things. I have reproduced this problem a few times but it has some special requirements. For example i download a torrent from a very fast peer in the rtorrent client. I have reproduced this with both rTorrent 0.4.5 - libTorrent 0.8.5 and two earlier versions which i don't remember. My friend is using the same versions as i am now and reported no problems in the latest development versions, he only started using them today. I have a 10/10Mbit connection at home and this happens when rtorrent is downloading at max speed. It varies somewhere around 7-10Mbit but never over 10Mbit by much. My friend only has a capacity of 1Mbit but got the same problem. This is why i'm reporting this because if it turns out that this can be reproduced by sending speciall crafted packets or packets in a special order then i guess it's pretty serious. I highly doubt this but still, a user process should not kill the net like rtorrent has done. Both me and my friend were running FreeBSD 6.0 RELEASE when this happened. I was not going to report this but a friend just told me he gets the exact same results on FreeBSD 6.0 so i felt i should tell someone. -- Med vänliga hälsningar Stefan Midjich aka nocturnal [Swehack] http://swehack.se From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:35:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A329C16B951 for ; Wed, 31 May 2006 20:35:32 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.171]) by mx1.FreeBSD.org (Postfix) with ESMTP id EB50643D46 for ; Wed, 31 May 2006 20:35:31 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so45318uge for ; Wed, 31 May 2006 13:35:30 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=iVu/klpYCce1lQxaTgCNPt/V2giVrNq5Cdive58pIEGiVuvjXtwTaMouxt9MuxUulqZYlaG9lr21uCRP+/FlgShLbfHbL3SHFlWJ93hCkoYiJlTT/KJuoT8S/6uBnyeBt1sR8pxkZM3j9Xm1/XpgfdnlQfCw000PyDRDTXWnSO8= Received: by 10.78.47.9 with SMTP id u9mr43418huu; Wed, 31 May 2006 13:35:29 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Wed, 31 May 2006 13:35:29 -0700 (PDT) Message-ID: <18e02bd30605311335j4f0baaffs62002d4b72c7715b@mail.gmail.com> Date: Wed, 31 May 2006 23:35:29 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <44ac8y1cfk.fsf@be-well.ilk.org> MIME-Version: 1.0 References: <18e02bd30605290545j1c9cceebwedc8d28bbf270e11@mail.gmail.com> <44ac8y1cfk.fsf@be-well.ilk.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: kern.ipc.somaxconn should be high for a PF firewall with a lot of states X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:35:39 -0000 On 5/31/06, Lowell Gilbert wrote: > > "Iantcho Vassilev" writes: > > > kern.ipc.somaxconn is for handling more incoming connections,right? > > Well, kind of. It's a systemwide limit on the maximum number of > connections that a given socket can accept. > > > but > does > > firewall connections are considered incoming? > > No, not really. But the question doesn't really make sense. What are > you trying to do? I just wanted to know..Actually i have a very loaded firewall(PF) with a lot of states and i was wondering if this can help.. But if it is for sockets(something i have missed) then i will not help.. What can this variable help(mysql socket?)? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:40:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 935D916B0BD for ; Wed, 31 May 2006 20:40:40 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.178]) by mx1.FreeBSD.org (Postfix) with ESMTP id 20AB343D55 for ; Wed, 31 May 2006 20:40:40 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id z74so80454pyg for ; Wed, 31 May 2006 13:40:39 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=j9YbWJ6dZzan4ZZjzuYvL0366MSYShBdLgbhb5+VeqN36IPsmgpgkPV0/q8V10ROmcP/2jelPgy4n1B/Yeevb5nEgoiooYhDJtq6Q7SxKb6upoALGTHInkYXxSj7OrVlK0RmzHCJ12Odsq/+imYRDqFpmaiATxOE5tD1lKfiEtk= Received: by 10.35.8.1 with SMTP id l1mr249619pyi; Wed, 31 May 2006 13:40:39 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Wed, 31 May 2006 13:40:39 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 22:40:39 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: <7cc8007f0605310416l78bc57c7k7a0472cfed32ec30@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <447B67BD.8070905@infowest.com> <447CB61F.1030702@systemoverload.net> <7cc8007f0605310416l78bc57c7k7a0472cfed32ec30@mail.gmail.com> Subject: Re: ndis problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:40:43 -0000 Well, even when I load bcmwl5_sys only it loads all three modules, due to references I guess. However no new record appears in ifconfig, no matter in what order or how I load them. I is getting really confusing, because there are people who made it and they even say it works well. Atanas From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:42:29 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 313D816AB86 for ; Wed, 31 May 2006 20:42:29 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id D3B9243D78 for ; Wed, 31 May 2006 20:42:24 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k4VKgO48008665; Wed, 31 May 2006 16:42:24 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k4VKgOSU008664; Wed, 31 May 2006 16:42:24 -0400 (EDT) From: Jerry McAllister Message-Id: <200605312042.k4VKgOSU008664@clunix.cl.msu.edu> To: roberthuff@rcn.com (Robert Huff) Date: Wed, 31 May 2006 16:42:24 -0400 (EDT) In-Reply-To: <17533.61128.28295.514215@jerusalem.litteratus.org> X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: using bsdlabel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:42:36 -0000 > > I've never used bsdlabel before; would someone please confirm > I've got this right? > Status quo: > > huff@>> bsdlabel da0s1 > # /dev/da0s1: > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 1024000 0 4.2BSD 0 0 0 > b: 2097152 1024000 swap > c: 8916012 0 unused 0 0 # "raw" part, don't edit > d: 2097152 3121152 4.2BSD 0 0 0 > > As I understand it, if I run this: > > huff@>> bsdlabel -w da0s1 -f /label.new > > where /label.new has: > > # /dev/da0s1: > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 1024000 0 4.2BSD 0 0 0 > b: 2097152 1024000 swap > c: 8916012 0 unused 0 0 # "raw" part, don't edit > d: 2097152 3121152 4.2BSD 0 0 0 > e: 3697708 5128304 4.2BSD 0 0 0 > > this will allocate the rest of the slice to partition 'e'. > (And we're ready to newfs.) If I am doing it by hand, I would prefer using direct edit as in: (NOTE, you apparently already have some usable label on the disk) >> bsdlabel -e -r da0s1 This will bring up an edit session (vi unless you have your editor set to something else - I use vi) as follows. > # /dev/da0s1: > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 1024000 0 4.2BSD 0 0 0 > b: 2097152 * swap > c: * 0 unused 0 0 # "raw" part, don't edit > d: 2097152 * 4.2BSD 0 0 0 > e: * * 4.2BSD 0 0 0 > Then, just write and quit the edit session It will calculate the last partition size and all the offsets for you just the way you want it. I use this method in our programs that automatically build variable sized disks for our clients. I fix the size of root (da0s1a), swap (da0s1b) and tmp (da0s1e) and then make the last partition (da0s1f) contain all the remainder, whatever it is. It works just fine. If you really want to work from a file, put the output of your bsdlabel into the file and then edit it as I show above. bsdlabel -r da0s1 >> label.new vi label.new Then do: disklabel -R da0s1 label.new The only thing you aren't doing in either of these cases is making that da0s1a bootable. If you want that, you need to do: either bsdlabel -B da0s1 bsdlabel -r -e and then do the edits as above or to do it from a file as created above do: disklabel -R -B da0s1 label.new ////jerry > > Robert Huff > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:43:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 131DF16BD2E for ; Wed, 31 May 2006 20:43:35 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB4DC43D46 for ; Wed, 31 May 2006 20:43:27 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id z74so81020pyg for ; Wed, 31 May 2006 13:43:27 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=CJmovVxmD9/imCszzzM7sS97mGX+rrkIbypwJEXNkjecmSZAsN+Q/Dym+eI+ZecPJuUfDLpMga7/49XyTdXXPjjU15qKiuAqrWu8VsGBgIBUjmbFxj0JPlR1ZDKHh7DU/O1jJAfkVa4ClWI12IhTmVc4ZHU8Q7rDBh7c5hwoLlc= Received: by 10.35.49.4 with SMTP id b4mr235227pyk; Wed, 31 May 2006 13:43:27 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Wed, 31 May 2006 13:43:27 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 22:43:27 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:43:40 -0000 I am quite new to FreeBSD. Could you please explain what do you mean by "recompiled kernel to be sure that the wireless support is included". Do you mean to create a kernel config with ndis and if_ndis statically linked into it? I haven't done this one so far. Atanas From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:46:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3B8F116B9A2 for ; Wed, 31 May 2006 20:46:03 +0000 (UTC) (envelope-from mj001@rogers.com) Received: from smtp105.rog.mail.re2.yahoo.com (smtp105.rog.mail.re2.yahoo.com [206.190.36.83]) by mx1.FreeBSD.org (Postfix) with SMTP id 32D8943D45 for ; Wed, 31 May 2006 20:45:58 +0000 (GMT) (envelope-from mj001@rogers.com) Received: (qmail 50598 invoked from network); 31 May 2006 20:45:58 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rogers.com; h=Received:Subject:From:To:Cc:In-Reply-To:References:Content-Type:Date:Message-Id:Mime-Version:X-Mailer:Content-Transfer-Encoding; b=ZE4ySmQXsthgLb+KT77jG3b8IdCFY7O0jZlKfTwYRqWxCq5R7QTe3ZpZ+kFul7SSty43vBrj33/tvK11BuIKmQx3XqTccGFdbXyWv0zCZooF77i5p54m2KTbaRN3cLiJsMdSDA3HcYGGPaUU/xnejR3Fn9PQx+SgmETVpFyidKc= ; Received: from unknown (HELO chaucer.jeays.ca) (mj001@rogers.com@72.139.51.96 with plain) by smtp105.rog.mail.re2.yahoo.com with SMTP; 31 May 2006 20:45:57 -0000 From: Mike Jeays To: jdow In-Reply-To: <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> <20060531131530.GA41305@owl.midgard.homeip.net> <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> Content-Type: text/plain Date: Wed, 31 May 2006 16:45:56 -0400 Message-Id: <1149108356.16116.26.camel@chaucer.jeays.ca> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: mehmet gogebakan , questions@freebsd.org, freebsd-questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:46:10 -0000 On Wed, 2006-05-31 at 10:43 -0700, jdow wrote: > From: "Erik Trulsson" > > > On Wed, May 31, 2006 at 03:49:42PM +0300, mehmet gogebakan wrote: > >> i would like to install 6.1-RELEASE to my computer , configuration is: > >> > >> 128 MB SDRAM > >> LG cdrom 52x > >> 8 MB Grafic card > >> 40 gb hd > >> p3 800 mhz processor > >> azza motherboard > >> > >> could you please tell me whether this configuration is suitable, if not > >> tell me the minimum configuration it should be.. > > > > Running 6.1 on that should not be any problem. > > > > In fact you could take a computer with only half the RAM of the above, half > > the disk space, and half the CPU speed, and still not have a problem running > > FreeBSD 6.1. > > I would suppose you could run it in an even smaller machine if you > had the patience. (After all you CAN run Windows XP on a 100MHz > machine with 32 megs of ram if you are REALLY REALLY patient.) > > The above machine might benefit from additional ram if he intends to > do mail filtering on the machine. Tools like SpamAssassin eat ram for > lunch and leave very little for dinner. > > {^_-} Joanne > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- I run 6.0 on a Pentium 100 with 128MB. It is very responsive at the command line, but unusably slow with KDE or GNOME and apps like Firefox - although they do work. With XFCE, it is not too bad; just needs a little patience. Why do I bother? I have had the machine since 1997, and it has never failed. It has been powered up almost continuously, and serves as a backup device every night. When it breaks, it is out of here. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 20:46:04 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F12D16B9B1 for ; Wed, 31 May 2006 20:46:04 +0000 (UTC) (envelope-from mj001@rogers.com) Received: from smtp105.rog.mail.re2.yahoo.com (smtp105.rog.mail.re2.yahoo.com [206.190.36.83]) by mx1.FreeBSD.org (Postfix) with SMTP id 32F7E43D66 for ; Wed, 31 May 2006 20:45:58 +0000 (GMT) (envelope-from mj001@rogers.com) Received: (qmail 50598 invoked from network); 31 May 2006 20:45:58 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rogers.com; h=Received:Subject:From:To:Cc:In-Reply-To:References:Content-Type:Date:Message-Id:Mime-Version:X-Mailer:Content-Transfer-Encoding; b=ZE4ySmQXsthgLb+KT77jG3b8IdCFY7O0jZlKfTwYRqWxCq5R7QTe3ZpZ+kFul7SSty43vBrj33/tvK11BuIKmQx3XqTccGFdbXyWv0zCZooF77i5p54m2KTbaRN3cLiJsMdSDA3HcYGGPaUU/xnejR3Fn9PQx+SgmETVpFyidKc= ; Received: from unknown (HELO chaucer.jeays.ca) (mj001@rogers.com@72.139.51.96 with plain) by smtp105.rog.mail.re2.yahoo.com with SMTP; 31 May 2006 20:45:57 -0000 From: Mike Jeays To: jdow In-Reply-To: <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> <20060531131530.GA41305@owl.midgard.homeip.net> <0b6301c684d9$c7a2c220$0225a8c0@Wednesday> Content-Type: text/plain Date: Wed, 31 May 2006 16:45:56 -0400 Message-Id: <1149108356.16116.26.camel@chaucer.jeays.ca> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: mehmet gogebakan , questions@freebsd.org, freebsd-questions@freebsd.org Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 20:46:16 -0000 On Wed, 2006-05-31 at 10:43 -0700, jdow wrote: > From: "Erik Trulsson" > > > On Wed, May 31, 2006 at 03:49:42PM +0300, mehmet gogebakan wrote: > >> i would like to install 6.1-RELEASE to my computer , configuration is: > >> > >> 128 MB SDRAM > >> LG cdrom 52x > >> 8 MB Grafic card > >> 40 gb hd > >> p3 800 mhz processor > >> azza motherboard > >> > >> could you please tell me whether this configuration is suitable, if not > >> tell me the minimum configuration it should be.. > > > > Running 6.1 on that should not be any problem. > > > > In fact you could take a computer with only half the RAM of the above, half > > the disk space, and half the CPU speed, and still not have a problem running > > FreeBSD 6.1. > > I would suppose you could run it in an even smaller machine if you > had the patience. (After all you CAN run Windows XP on a 100MHz > machine with 32 megs of ram if you are REALLY REALLY patient.) > > The above machine might benefit from additional ram if he intends to > do mail filtering on the machine. Tools like SpamAssassin eat ram for > lunch and leave very little for dinner. > > {^_-} Joanne > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- I run 6.0 on a Pentium 100 with 128MB. It is very responsive at the command line, but unusably slow with KDE or GNOME and apps like Firefox - although they do work. With XFCE, it is not too bad; just needs a little patience. Why do I bother? I have had the machine since 1997, and it has never failed. It has been powered up almost continuously, and serves as a backup device every night. When it breaks, it is out of here. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:04:43 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6E3CE16A6BC for ; Wed, 31 May 2006 21:04:43 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms044pub.verizon.net (vms044pub.verizon.net [206.46.252.44]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1BC9443D45 for ; Wed, 31 May 2006 21:04:43 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.2] ([71.101.6.8]) by vms044.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J0500BHTEJURFX6@vms044.mailsrvcs.net> for questions@FreeBSD.org; Wed, 31 May 2006 16:04:42 -0500 (CDT) Date: Wed, 31 May 2006 17:05:28 -0400 From: Joe In-reply-to: <20060531150245.GA64716@xor.obsecurity.org> To: Kris Kennaway Message-id: <447E0518.50803@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <447B86F3.6070500@freedomcircle.net> <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> <447D834A.90000@freedomcircle.net> <20060531150245.GA64716@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:04:49 -0000 Kris Kennaway wrote: > Anyway, retry the binary upgrade as you say. The binary upgrade started from the 6.0-RELEASE CD-ROM didn't work, but using 6.1-RELEASE floppies was successful. I peaked at the debug screen and saw how it gets done: The GENERIC .ko's get put into a separate directory, then there's an 'rm -rf /boot/kernel' and then the GENERIC directory is moved to /boot/kernel. I presume that doing it from sysinstall in a running 6.0 system, the 'rm -rf' fails in spite of the force flag. You'd think the 6.0 CD ought not to have that problem, but I'm not sure if it fetched the .ko's from 6.1 even though it got everything else from 6.1. Thanks for your help. Joe From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:09:30 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3A59016AD40 for ; Wed, 31 May 2006 21:09:30 +0000 (UTC) (envelope-from roberthuff@rcn.com) Received: from smtp01.lnh.mail.rcn.net (smtp01.lnh.mail.rcn.net [207.172.4.11]) by mx1.FreeBSD.org (Postfix) with ESMTP id A26C943D49 for ; Wed, 31 May 2006 21:09:29 +0000 (GMT) (envelope-from roberthuff@rcn.com) Received: from 209-6-203-77.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com (HELO jerusalem.litteratus.org.litteratus.org) ([209.6.203.77]) by smtp01.lnh.mail.rcn.net with ESMTP; 31 May 2006 17:10:42 -0400 X-IronPort-AV: i="4.05,194,1146456000"; d="scan'208"; a="214198691:sNHT6136445926" From: Robert Huff MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <17534.1452.443218.271412@jerusalem.litteratus.org> Date: Wed, 31 May 2006 17:07:56 -0400 To: questions@freebsd.org In-Reply-To: <200605312042.k4VKgOSU008664@clunix.cl.msu.edu> References: <17533.61128.28295.514215@jerusalem.litteratus.org> <200605312042.k4VKgOSU008664@clunix.cl.msu.edu> X-Mailer: VM 7.17 under 21.5 (beta27) "fiddleheads" XEmacs Lucid Cc: Subject: Re: using bsdlabel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:09:34 -0000 Jerry McAllister writes: > The only thing you aren't doing in either of these cases is making > that da0s1a bootable. If you want that, you need to do: That's because it already is, and I do _not_ want to change that. It's a 4.5 G disk. When I installed the system, I spent 0.5 G on /, 1 G for swap, another for /var ... and left the rest untouched. I now have a project that can use that space. > If I am doing it by hand, I would prefer using direct edit as in: > (NOTE, you apparently already have some usable label on the disk) > > >> bsdlabel -e -r da0s1 > > This will bring up an edit session (vi unless you have your editor > set to something else - I use vi) > as follows. > > > # /dev/da0s1: > > 8 partitions: > > # size offset fstype [fsize bsize bps/cpg] > > a: 1024000 0 4.2BSD 0 0 0 > > b: 2097152 * swap > > c: * 0 unused 0 0 # "raw" part, don't edit > > d: 2097152 * 4.2BSD 0 0 0 > > e: * * 4.2BSD 0 0 0 So (using the file method) I can specify the start, use '*' for the size, and it will compute the correct value for "rest of the slice"? Robert Huff From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:12:52 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E04916BF69 for ; Wed, 31 May 2006 21:12:52 +0000 (UTC) (envelope-from lalev@sv-bg.com) Received: from mail.sv-bg.com (ns.sv-bg.com [213.222.60.18]) by mx1.FreeBSD.org (Postfix) with SMTP id EEB7943D45 for ; Wed, 31 May 2006 21:12:50 +0000 (GMT) (envelope-from lalev@sv-bg.com) Received: (qmail 34372 invoked by uid 1010); 1 Jun 2006 00:22:35 -0000 Received: from unknown (HELO fence) (lalev@sv-bg.com@213.222.60.195) by mail.sv-bg.com with SMTP; 1 Jun 2006 00:22:35 -0000 Date: Thu, 1 Jun 2006 00:12:07 +0300 From: Angelin Lalev To: questions@freebsd.org Message-ID: <20060601001207.4eef20fd@fence> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd7.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Subject: Firefox, TrueType, Windows Fonts X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:12:59 -0000 I'm not certain to even ask the right question here, but here I go. Apparently, there are certain web pages that require specifically Arial and look like sh*th on Firefox. Since there is no Arial on FreeBSD and since I'm aware of the copyright and patent issues which prevent copying and displaying (correctly) Arial and other TTF fonts from Windows boxes, I was wandering is there a way to make firefox choose Helvetica instead of Arial and say Times New Roman instead of Tahoma and so on ... The Fonts dialog on Firefox seem to only address the choice of default Serif, Sans-Serif and Monospace fonts. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:16:05 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 784D216A6AF for ; Wed, 31 May 2006 21:16:05 +0000 (UTC) (envelope-from lalev@sv-bg.com) Received: from mail.sv-bg.com (proxy.sv-bg.com [213.222.60.18]) by mx1.FreeBSD.org (Postfix) with SMTP id C1B6F43D45 for ; Wed, 31 May 2006 21:16:04 +0000 (GMT) (envelope-from lalev@sv-bg.com) Received: (qmail 34592 invoked by uid 1010); 1 Jun 2006 00:25:51 -0000 Received: from unknown (HELO fence) (lalev@sv-bg.com@213.222.60.195) by mail.sv-bg.com with SMTP; 1 Jun 2006 00:25:51 -0000 Date: Thu, 1 Jun 2006 00:15:23 +0300 From: Angelin Lalev To: freebsd-questions@freebsd.org Message-ID: <20060601001523.6a776070@fence> In-Reply-To: <200605311335.54004.don.hinton@vanderbilt.edu> References: <200605311335.54004.don.hinton@vanderbilt.edu> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd7.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:16:07 -0000 On Wed, 31 May 2006 13:35:53 -0500 Don Hinton wrote: > Hi: > > When trying to upgrade Flash, I ran into the following in the > UPDATING file: > > 20060408: > AFFECTS: users of www/linux-flashplugin* > AUTHOR: hrs@FreeBSD.org > > These ports have been removed because the End User License Agreement > explicitly forbids to run the Flash Player on FreeBSD. > For more details, see > http://www.macromedia.com/shockwave/download/license/desktop/. > > So I contacted Adobe, see below, and according to the customer > service rep, Astrid C. Villanueva, there is not problem with using > Flash on FreeBSD, it's just not supported. > > Therefore, would it be possible to add it back to the ports? > > thanks... > don > > ---------- Forwarded Message ---------- > > Subject: Macromedia Customer Service Request [8564611] > Date: Wednesday 31 May 2006 13:33 > From: "Service" > To: "don hinton" > > Hi again Don, > > Thank you for writing back and for the clarification provided. > > I understand your feedback on the compatibility of Flash Player on > FreeBSD. > > Please note that Flash Player is not supported in FreeBSD, thus it not > mentioned on the End User License Agreement that Flash Player can be > downloaded and installed on the operating system. It is not that the > web player is prohibited in FreeBSD, but the operating system itself > is not compatible with Player. > > Please note that it is your option whether to install Flash Player on > your FreeBSD; however, please note that we cannot provide you with > any technical support, warranties or remedies for the software, > although it is clearly stated on the End User License Agreement, the > only authorized operating systems where you may download and install > Flash Player. > > To view the System Requirements of Flash Player, you may go to: > > http://www.macromedia.com/software/flashplayer/productinfo/systemreqs/ > > In connection with this, if you would like to make suggestions or > comments on how we can improve future versions of our software, or to > report possible "bugs" in our current versions, please visit: > > http://www.macromedia.com/support/email/wishform/ > > Your comments, suggestions, and ideas for improvements are very > important to us. We appreciate you taking the time to send us this > information. > > I hope this additional information helps. > > Thank you for your patience on this matter. > > Should you have further concerns, feel free to write us back. > > Regards, > > Astrid C. Villanueva > Customer Service > Macromedia, now part of Adobe Systems > > ------------------------------------------------------------------------ > > Please use your incident number 8564611 in any correspondence with us. > > Customer Service at Macromedia, now part of Adobe Systems > > http://www.macromedia.com/support/service/ > > Note concerning Attachments: Please do not send attachments in a > reply to this email. Instead, can you please contact the support > agent to make arrangements to send your files. Thank you. > > ------------------------------------------------------- > Have you tried gnash? /usr/ports/graphics/gnash From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:18:53 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2D99016BB47 for ; Wed, 31 May 2006 21:18:53 +0000 (UTC) (envelope-from dan@dan.emsphone.com) Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id B21BC43D49 for ; Wed, 31 May 2006 21:18:52 +0000 (GMT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.13.1/8.13.4) id k4VLIpFP062759; Wed, 31 May 2006 16:18:51 -0500 (CDT) (envelope-from dan) Date: Wed, 31 May 2006 16:18:51 -0500 From: Dan Nelson To: Angelin Lalev Message-ID: <20060531211851.GA97883@dan.emsphone.com> References: <20060601001207.4eef20fd@fence> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060601001207.4eef20fd@fence> X-OS: FreeBSD 5.5-PRERELEASE X-message-flag: Outlook Error User-Agent: Mutt/1.5.11 Cc: questions@freebsd.org Subject: Re: Firefox, TrueType, Windows Fonts X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:18:57 -0000 In the last episode (Jun 01), Angelin Lalev said: > I'm not certain to even ask the right question here, but here I go. > > Apparently, there are certain web pages that require specifically > Arial and look like sh*th on Firefox. Since there is no Arial on > FreeBSD and since I'm aware of the copyright and patent issues which > prevent copying and displaying (correctly) Arial and other TTF fonts > from Windows boxes, I was wandering is there a way to make firefox > choose Helvetica instead of Arial and say Times New Roman instead of > Tahoma and so on ... The Fonts dialog on Firefox seem to only > address the choice of default Serif, Sans-Serif and Monospace fonts. Freetype2's auto-hinter (which does not infringe on any patents) should be able to display Arial from the x11-fonts/webfonts port just fine. http://freetype.sourceforge.net/patents.html -- Dan Nelson dnelson@allantgroup.com From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:24:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6C6B316A6CD for ; Wed, 31 May 2006 21:24:49 +0000 (UTC) (envelope-from wmoran@collaborativefusion.com) Received: from mx00.pub.collaborativefusion.com (mx00.pub.collaborativefusion.com [206.210.89.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id E984943D45 for ; Wed, 31 May 2006 21:24:48 +0000 (GMT) (envelope-from wmoran@collaborativefusion.com) Received: from vanquish.pgh.priv.collaborativefusion.com (vanquish.pgh.priv.collaborativefusion.com [192.168.2.61]) (AUTH: LOGIN wmoran, TLS: TLSv1/SSLv3,256bits,AES256-SHA) by wingspan with esmtp; Wed, 31 May 2006 17:24:47 -0400 id 00056410.447E099F.0000F105 Date: Wed, 31 May 2006 17:24:47 -0400 From: Bill Moran To: freebsd-questions@freebsd.org Message-Id: <20060531172447.c61c305a.wmoran@collaborativefusion.com> In-Reply-To: <200605311335.54004.don.hinton@vanderbilt.edu> References: <200605311335.54004.don.hinton@vanderbilt.edu> Organization: Collaborative Fusion X-Mailer: Sylpheed version 2.2.4 (GTK+ 2.8.17; i386-portbld-freebsd6.0) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:24:51 -0000 On Wed, 31 May 2006 13:35:53 -0500 Don Hinton wrote: > Hi: > > When trying to upgrade Flash, I ran into the following in the UPDATING file: > > 20060408: > AFFECTS: users of www/linux-flashplugin* > AUTHOR: hrs@FreeBSD.org > > These ports have been removed because the End User License Agreement > explicitly forbids to run the Flash Player on FreeBSD. > For more details, see > http://www.macromedia.com/shockwave/download/license/desktop/. > > So I contacted Adobe, see below, and according to the customer service rep, > Astrid C. Villanueva, there is not problem with using Flash on FreeBSD, it's > just not supported. > > Therefore, would it be possible to add it back to the ports? Update your ports tree. -- Bill Moran Collaborative Fusion Inc. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:31:54 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1745E16A93A for ; Wed, 31 May 2006 21:31:54 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8567743D45 for ; Wed, 31 May 2006 21:31:53 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k4VLVrlP008851; Wed, 31 May 2006 17:31:53 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k4VLVmlF008850; Wed, 31 May 2006 17:31:48 -0400 (EDT) From: Jerry McAllister Message-Id: <200605312131.k4VLVmlF008850@clunix.cl.msu.edu> To: roberthuff@rcn.com (Robert Huff) Date: Wed, 31 May 2006 17:31:47 -0400 (EDT) In-Reply-To: <17534.1452.443218.271412@jerusalem.litteratus.org> X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: using bsdlabel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:32:02 -0000 > > > Jerry McAllister writes: > > > The only thing you aren't doing in either of these cases is making > > that da0s1a bootable. If you want that, you need to do: > > That's because it already is, and I do _not_ want to change that. > It's a 4.5 G disk. When I installed the system, I spent 0.5 G > on /, 1 G for swap, another for /var ... and left the rest > untouched. > I now have a project that can use that space. OK. No problem. By the way, you can't run bsdlabel on a mounted and active slice. So, if you are booted to da0s1, then it won't work. You will need to do something like boot to the fixit CD or boot from another disk (which will change your device name for that moment). > > If I am doing it by hand, I would prefer using direct edit as in: > > (NOTE, you apparently already have some usable label on the disk) > > > > >> bsdlabel -e -r da0s1 > > > > This will bring up an edit session (vi unless you have your editor > > set to something else - I use vi) > > as follows. > > > > > # /dev/da0s1: > > > 8 partitions: > > > # size offset fstype [fsize bsize bps/cpg] > > > a: 1024000 0 4.2BSD 0 0 0 > > > b: 2097152 * swap > > > c: * 0 unused 0 0 # "raw" part, don't edit > > > d: 2097152 * 4.2BSD 0 0 0 > > > e: * * 4.2BSD 0 0 0 > > So (using the file method) I can specify the start, use '*' for > the size, and it will compute the correct value for "rest of the slice"? Yes, you can do it both with file and edit method. You only need to specify the offset for the first slice and then * after that for offset. Then size for every one except the last which can also be * - and it will put everything left in to that last one. It works just dandy for me that way. ////jerry > > > Robert Huff > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:42:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8BB4616C051 for ; Wed, 31 May 2006 21:42:36 +0000 (UTC) (envelope-from don.hinton@vanderbilt.edu) Received: from mailgate04.smtp.vanderbilt.edu (mailgate04.smtp.Vanderbilt.Edu [129.59.1.75]) by mx1.FreeBSD.org (Postfix) with ESMTP id A2A4D43D6A for ; Wed, 31 May 2006 21:42:31 +0000 (GMT) (envelope-from don.hinton@vanderbilt.edu) Received: from smtp09.smtp.vanderbilt.edu (smtp09.smtp.Vanderbilt.Edu [129.59.1.239]) by mailgate04.smtp.vanderbilt.edu (8.13.6/8.13.6) with ESMTP id k4VLgUEV029271 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 31 May 2006 16:42:30 -0500 Received: from smtp09.smtp.vanderbilt.edu (localhost [127.0.0.1]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9C+d3.7.9) with ESMTP id k4VLgUXL008982; Wed, 31 May 2006 16:42:30 -0500 (CDT) Received: from a129103.n1.vanderbilt.edu (A129103.N1.Vanderbilt.Edu [129.59.129.103]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9.3B+d3.7.9) with ESMTP id k4VLgTc1008979 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 31 May 2006 16:42:30 -0500 (CDT) From: Don Hinton Organization: ISIS To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 16:42:28 -0500 User-Agent: KMail/1.9.1 References: <200605311335.54004.don.hinton@vanderbilt.edu> <20060531172447.c61c305a.wmoran@collaborativefusion.com> In-Reply-To: <20060531172447.c61c305a.wmoran@collaborativefusion.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605311642.29528.don.hinton@vanderbilt.edu> X-Proofpoint-Virus-Version: vendor=fsecure engine=4.64.4171:2.3.9, 1.2.33, 4.0.164 definitions=2006-05-31_02:2006-05-31, 2006-05-31, 2006-05-31 signatures=0 X-PPS: No, score=0 Cc: Bill Moran Subject: Re: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:42:44 -0000 Hi Bill: > > Therefore, would it be possible to add it back to the ports? > > Update your ports tree. I did, but I was going by what was in /usr/ports/UPDATING. Sorry for the noise... thanks... don -- Don Hinton tel: 615.480.5667 ISIS, Vanderbilt University skype: donhinton http://people.vanderbilt.edu/~don.hinton/ From owner-freebsd-questions@FreeBSD.ORG Wed May 31 21:48:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5FC7216A95D for ; Wed, 31 May 2006 21:48:19 +0000 (UTC) (envelope-from henry.lenzi@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.207]) by mx1.FreeBSD.org (Postfix) with ESMTP id BC86543D72 for ; Wed, 31 May 2006 21:48:14 +0000 (GMT) (envelope-from henry.lenzi@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so126203nzf for ; Wed, 31 May 2006 14:48:14 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=tVIhmzEPSblv3bFUg6uqAre7fvKpJ9VcQXAgHk510UAvthF8jmcw+zZ9wvGiVkCS/kGWVwWjyaNnhtnT9QVsMOwNRgzondvKPpNqSDg5HQOKvRhR3/McoAEu3RmAqmNSY/6oeO3h5KLZaHnCbW4BFd8UfqlzG5jcL32uGkuCKKA= Received: by 10.36.250.53 with SMTP id x53mr306517nzh; Wed, 31 May 2006 14:48:14 -0700 (PDT) Received: by 10.37.12.38 with HTTP; Wed, 31 May 2006 14:48:13 -0700 (PDT) Message-ID: <8b4c81f0605311448x5ca19beftbc1199df242c0769@mail.gmail.com> Date: Wed, 31 May 2006 18:48:13 -0300 From: "Henry Lenzi" To: freebsd-questions@freebsd.org In-Reply-To: <20060531172447.c61c305a.wmoran@collaborativefusion.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200605311335.54004.don.hinton@vanderbilt.edu> <20060531172447.c61c305a.wmoran@collaborativefusion.com> Subject: Re: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 21:48:26 -0000 It's back? From owner-freebsd-questions@FreeBSD.ORG Wed May 31 22:26:57 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CE22F16A9CE for ; Wed, 31 May 2006 22:26:57 +0000 (UTC) (envelope-from ajr9@po.cwru.edu) Received: from beta.eecs.cwru.edu (beta.EECS.CWRU.Edu [129.22.150.110]) by mx1.FreeBSD.org (Postfix) with ESMTP id 61C2443D45 for ; Wed, 31 May 2006 22:26:57 +0000 (GMT) (envelope-from ajr9@po.cwru.edu) Received: from [10.0.0.6] ([::ffff:72.25.105.188]) (AUTH: PLAIN reitz, TLS: TLSv1/SSLv3,128bits,RC4-SHA) by beta.eecs.cwru.edu with esmtp; Wed, 31 May 2006 18:26:56 -0400 id 000ABEDC.447E1830.00004114 Mime-Version: 1.0 (Apple Message framework v749.3) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: FreeBSD Questions From: Andrew Reitz Date: Wed, 31 May 2006 15:26:54 -0700 X-Mailer: Apple Mail (2.749.3) Cc: Subject: Problems with sshd on FreeBSD 4.11-RELEASE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 22:27:00 -0000 Hello, For reasons that I don't want to go into here, I have recently downgraded my principal FreeBSD server from 6.1 to 4.11-RELEASE. I did this by installing a fresh copy of FreeBSD 4.11 on a clean HD, and then I rsync'd all of my data over. Everything has been working fine, until I tried to SSH to the box this afternoon. While everything was working fine this morning, now sshd hangs up immediately on all clients that attempt to connect. In / var/log/messages, I see errors like this for every ssh connection attempt: May 31 15:21:06 redefine sshd[8543]: error: ssh_dss_sign: sign failed May 31 15:21:06 redefine sshd[8543]: fatal: mm_answer_sign: key_sign failed Google hasn't enlightened me at all. This was *just* working a few hours ago, and now, nada. Does anyone on this list have any ideas? Thanks, -Andy Reitz. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 22:30:23 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C434916A741 for ; Wed, 31 May 2006 22:30:23 +0000 (UTC) (envelope-from ajr9@po.cwru.edu) Received: from beta.eecs.cwru.edu (beta.EECS.CWRU.Edu [129.22.150.110]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4670C43D46 for ; Wed, 31 May 2006 22:30:23 +0000 (GMT) (envelope-from ajr9@po.cwru.edu) Received: from [10.0.0.6] ([::ffff:72.25.105.188]) (AUTH: PLAIN reitz, TLS: TLSv1/SSLv3,128bits,RC4-SHA) by beta.eecs.cwru.edu with esmtp; Wed, 31 May 2006 18:30:22 -0400 id 000ABF70.447E18FE.0000424A Mime-Version: 1.0 (Apple Message framework v749.3) In-Reply-To: References: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Andrew Reitz Date: Wed, 31 May 2006 15:30:20 -0700 To: FreeBSD Questions X-Mailer: Apple Mail (2.749.3) Cc: Subject: Re: Problems with sshd on FreeBSD 4.11-RELEASE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 22:30:26 -0000 On May 31, 2006, at 3:26 PM, Andrew Reitz wrote: > Hello, > > For reasons that I don't want to go into here, I have recently > downgraded my principal FreeBSD server from 6.1 to 4.11-RELEASE. I > did this by installing a fresh copy of FreeBSD 4.11 on a clean HD, > and then I rsync'd all of my data over. > > Everything has been working fine, until I tried to SSH to the box > this afternoon. While everything was working fine this morning, now > sshd hangs up immediately on all clients that attempt to connect. > In /var/log/messages, I see errors like this for every ssh > connection attempt: > > May 31 15:21:06 redefine sshd[8543]: error: ssh_dss_sign: sign failed > May 31 15:21:06 redefine sshd[8543]: fatal: mm_answer_sign: > key_sign failed > > Google hasn't enlightened me at all. This was *just* working a few > hours ago, and now, nada. Does anyone on this list have any ideas? Curiously, I just restarted sshd, and now things are working again. Has anybody ever seen this before? -Andy. From owner-freebsd-questions@FreeBSD.ORG Wed May 31 22:37:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D47DB16C217 for ; Wed, 31 May 2006 22:37:22 +0000 (UTC) (envelope-from njt@ayvali.org) Received: from sanddollar.geekisp.com (sanddollar.geekisp.com [216.168.135.167]) by mx1.FreeBSD.org (Postfix) with ESMTP id 839DD43D5A for ; Wed, 31 May 2006 22:37:09 +0000 (GMT) (envelope-from njt@ayvali.org) Received: (qmail 30 invoked by uid 1003); 31 May 2006 22:37:08 -0000 Received: from clam.int.geekisp.com (HELO clam.geekisp.com) (192.168.4.38) by mail.geekisp.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 31 May 2006 22:37:08 -0000 Received: from clam.geekisp.com (njt@localhost.geekisp.com [127.0.0.1]) by clam.geekisp.com (8.13.4/8.12.11) with ESMTP id k4VMb7Pb017734; Wed, 31 May 2006 18:37:07 -0400 (EDT) Received: (from njt@localhost) by clam.geekisp.com (8.13.4/8.13.3/Submit) id k4VMb7df029371; Wed, 31 May 2006 18:37:07 -0400 (EDT) X-Authentication-Warning: clam.geekisp.com: njt set sender to njt@ayvali.org using -f Date: Wed, 31 May 2006 18:37:06 -0400 From: "N.J. Thomas" To: Lawrence Horvath Message-ID: <20060531223706.GA4607@ayvali.org> References: <20060530212241.GK3413@ayvali.org> <200605301630.45755.kirk@daycos.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200605301630.45755.kirk@daycos.com> User-Agent: Mutt/1.5.9i Cc: freebsd-questions@freebsd.org Subject: Re: sudoedit, restricting to particular folder X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 22:37:29 -0000 * Kirk Strauser [2006-05-30 16:30:45 -0500]: > > luser ALL = (root) sudoedit /home/luser/foo/* > > Why not give them root while you're at it: > luser$ cd ~/foo; ln -s /etc/master.passwd; sudoedit ~/foo/master.passwd Yikes, he's right. Don't put that in your sudoers file. I found some notes on the sudo mailing lists while Googling, that luser ALL = (root) sudoedit /home/luser/foo/ would work one day for all files in /home/luser/foo/, IIRC Todd Miller said this would come out in version 1.7, but it looks like development of sudo has stalled, so short of writing your own wrapper script (which shouldn't be terribly hard) I don't know how to solve the original problem of restricting sudoedit to a particular directly using sudo alone. Thomas -- N.J. Thomas njt@ayvali.org Etiamsi occiderit me, in ipso sperabo From owner-freebsd-questions@FreeBSD.ORG Wed May 31 22:55:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4A84E16C012 for ; Wed, 31 May 2006 22:55:41 +0000 (UTC) (envelope-from aaronvan@comcast.net) Received: from sccrmhc13.comcast.net (sccrmhc13.comcast.net [204.127.200.83]) by mx1.FreeBSD.org (Postfix) with ESMTP id D393043DF1 for ; Wed, 31 May 2006 22:54:56 +0000 (GMT) (envelope-from aaronvan@comcast.net) Received: from smailcenter59.comcast.net ([204.127.205.159]) by comcast.net (sccrmhc13) with SMTP id <2006053122545501300m45ohe>; Wed, 31 May 2006 22:54:55 +0000 Received: from [131.120.57.132] by smailcenter59.comcast.net; Wed, 31 May 2006 22:54:54 +0000 From: aaronvan@comcast.net To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 22:54:54 +0000 Message-Id: <053120062254.27973.447E1EBE0004A45200006D452207003201020E9002019D0E0E@comcast.net> X-Mailer: AT&T Message Center Version 1 (Apr 11 2006) X-Authenticated-Sender: YWFyb252YW5AY29tY2FzdC5uZXQ= Subject: Re: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 22:55:49 -0000 Roger, Marvell had the driver on their website. I downloaded the tarball at work and burned it to a CD. I'll try installing it tonight. They also have drivers for 5.* available. -- AV > yes it does the driver is myk ... you need to download it yourself. On Mon, 2006-05-29 at 18:26 -0700, Aaron VanAlstine wrote: > Folks, > > I have an ASUS P5LD2 mobo with a Marvell 88E8053 PCIe Gigabit LAN > controller. FreeBSD doesn't seem to recognize it. Should the LAN controller > work out of the box or am I missing a driver? > > ifconfig returns plip0: and lo0: with their respective flags. Sysinstall > says plip0 is an "unknown interface type." The speed LED is orange > indicating a 100 Mbps connection, but the act/link is off. My ISP supports > DHCP. > > Thanks! > > -- Aaron VanAlstine > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Dev Tugnait Want to link to this message? Use this URL: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 34F5E16C4B4 for ; Wed, 31 May 2006 23:43:19 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from betty.computinginnovations.com (dsl081-142-072.chi1.dsl.speakeasy.net [64.81.142.72]) by mx1.FreeBSD.org (Postfix) with ESMTP id 606F443D73 for ; Wed, 31 May 2006 23:43:14 +0000 (GMT) (envelope-from derek@computinginnovations.com) Received: from p17.computinginnovations.com (dhcp-10-20-30-100.computinginnovations.com [10.20.30.100]) (authenticated bits=0) by betty.computinginnovations.com (8.13.6/8.12.11) with ESMTP id k4VNgkCp047680; Wed, 31 May 2006 18:42:47 -0500 (CDT) Message-Id: <6.0.0.22.2.20060531184157.02680d10@mail.computinginnovations.com> X-Sender: derek@mail.computinginnovations.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Wed, 31 May 2006 18:42:38 -0500 To: Andrew Reitz , FreeBSD Questions From: Derek Ragona In-Reply-To: References: Mime-Version: 1.0 X-ComputingInnovations-MailScanner-Information: Please contact the ISP for more information X-ComputingInnovations-MailScanner: Found to be clean X-ComputingInnovations-MailScanner-From: derek@computinginnovations.com X-Spam-Status: No Content-Type: text/plain; charset="us-ascii"; format=flowed X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: Problems with sshd on FreeBSD 4.11-RELEASE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 May 2006 23:43:25 -0000 You may have an old key on the system you are ssh'ing to the downgraded server. Clear your ssh keys and try it again. -Derek At 05:26 PM 5/31/2006, Andrew Reitz wrote: >Hello, > >For reasons that I don't want to go into here, I have recently >downgraded my principal FreeBSD server from 6.1 to 4.11-RELEASE. I >did this by installing a fresh copy of FreeBSD 4.11 on a clean HD, >and then I rsync'd all of my data over. > >Everything has been working fine, until I tried to SSH to the box >this afternoon. While everything was working fine this morning, now >sshd hangs up immediately on all clients that attempt to connect. In / >var/log/messages, I see errors like this for every ssh connection >attempt: > >May 31 15:21:06 redefine sshd[8543]: error: ssh_dss_sign: sign failed >May 31 15:21:06 redefine sshd[8543]: fatal: mm_answer_sign: key_sign >failed > >Google hasn't enlightened me at all. This was *just* working a few >hours ago, and now, nada. Does anyone on this list have any ideas? > >Thanks, > -Andy Reitz. > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >-- >This message has been scanned for viruses and >dangerous content by MailScanner, and is >believed to be clean. >MailScanner thanks transtec Computers for their support. > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 00:54:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7C26216A9DC for ; Thu, 1 Jun 2006 00:54:29 +0000 (UTC) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (a2.scoop.co.nz [202.50.109.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id C3A3E43D45 for ; Thu, 1 Jun 2006 00:54:28 +0000 (GMT) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (localhost [127.0.0.1]) by a2.scoop.co.nz (8.13.6/8.13.1) with ESMTP id k510sO2g009166; Thu, 1 Jun 2006 12:54:24 +1200 (NZST) (envelope-from andrew@scoop.co.nz) Received: from localhost (andrew@localhost) by a2.scoop.co.nz (8.13.6/8.13.1/Submit) with ESMTP id k510sOug009152; Thu, 1 Jun 2006 12:54:24 +1200 (NZST) (envelope-from andrew@scoop.co.nz) X-Authentication-Warning: a2.scoop.co.nz: andrew owned process doing -bs Date: Thu, 1 Jun 2006 12:54:24 +1200 (NZST) From: Andrew McNaughton To: Bill Moran In-Reply-To: <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> Message-ID: <20060601122627.F62075@a2.scoop.co.nz> References: <20060531230821.T62075@a2.scoop.co.nz> <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0 (a2.scoop.co.nz [127.0.0.1]); Thu, 01 Jun 2006 12:54:24 +1200 (NZST) X-Virus-Scanned: ClamAV 0.88.1/1504/Thu Jun 1 07:59:14 2006 on a2.scoop.co.nz X-Virus-Status: Clean Cc: freebsd-questions@freebsd.org Subject: Re: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 00:54:36 -0000 On Wed, 31 May 2006, Bill Moran wrote: > On Wed, 31 May 2006 23:22:16 +1200 (NZST) > Andrew McNaughton wrote: >> >> portaudit gives me alerts when security issues arise in installed ports, >> and portversion keeps me abreast of less critical updates. It's a whole >> lot easier than the old situation of tracking the security lists every >> day. >> >> Is there a comparably easy way to track available and critical upgrades >> for the FreeBSD core? > > The canonical way to do this is to subscribe to announce@ and/or > security-announce@freebsd.org. Very low traffic, but important > stuff you need to know comes through those channels. I do that, but my mailbox gets lots of traffic. Sometimes I miss something, and as far as I know, there's then no way system to keep reminding me, nor a way to quickly check the current state of play. Andrew ------------------------------------------------------------------- Andrew McNaughton http://www.scoop.co.nz/ andrew@scoop.co.nz Mobile: +61 422 753 792 pgp keyid: 1C7A8CFD -- "We are trying to figure out how you conduct a war against something other than a nation-state and how ... you conduct a war in countries that you are not at war with," -- Donald Rumsfeld, 27 Jan 2006 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 00:59:22 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9AE6716C26D for ; Thu, 1 Jun 2006 00:59:22 +0000 (UTC) (envelope-from hakmi@rogers.com) Received: from smtp105.rog.mail.re2.yahoo.com (smtp105.rog.mail.re2.yahoo.com [206.190.36.83]) by mx1.FreeBSD.org (Postfix) with SMTP id 0811D43D46 for ; Thu, 1 Jun 2006 00:59:21 +0000 (GMT) (envelope-from hakmi@rogers.com) Received: (qmail 50042 invoked from network); 1 Jun 2006 00:59:20 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rogers.com; h=Received:From:To:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:X-MimeOLE:Thread-Index; b=WV590Quwi2xhaLCAqiiBd0ZJsnzs7cM7AmRU+9zIq7eCMCk0XZ3dfeqXiHn6itgXxm/ZsP+l2DK7so+ymLdClXNrXa3xbLTmNpagrgyvo/JY5/xiYqcrG7m81H4WSNWCGJxA7Z8t6t535wfvQKrORIpTdfnoHtd6udBvYXrDnYI= ; Received: from unknown (HELO tamouh) (hakmi@rogers.com@70.27.160.99 with login) by smtp105.rog.mail.re2.yahoo.com with SMTP; 1 Jun 2006 00:59:20 -0000 From: "Tamouh H." To: "'Andrew Reitz'" , "'FreeBSD Questions'" Date: Wed, 31 May 2006 20:59:28 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaFAeiSZQT7Yz9xSFOBvFTlcVBA7wAFGTWg Message-Id: <20060601005921.0811D43D46@mx1.FreeBSD.org> Cc: Subject: RE: Problems with sshd on FreeBSD 4.11-RELEASE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 00:59:29 -0000 =20 Curiously, I just restarted sshd, and now things are working again. =20 Has anybody ever seen this before? -Andy. We had problems as well with FreeBSD 4.11 and sshd service hanging or = breaking because of an OPENSSL lib which are required to run OpenSSH. = Since then we moved out of 4.11 to 5.x From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:13:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8060C16A44E for ; Thu, 1 Jun 2006 01:13:11 +0000 (UTC) (envelope-from MTaylor@bytecraft.com.au) Received: from wolf.bytecraft.au.com (wolf.bytecraft.au.com [203.39.118.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id A473943D46 for ; Thu, 1 Jun 2006 01:13:09 +0000 (GMT) (envelope-from MTaylor@bytecraft.com.au) Received: from localhost (localhost [127.0.0.1]) by wolf.bytecraft.au.com (8.12.11/8.12.11) with ESMTP id k511D0M7022799; Thu, 1 Jun 2006 11:13:01 +1000 (EST) (envelope-from MTaylor@bytecraft.com.au) Received: from wolf.bytecraft.au.com ([127.0.0.1]) by localhost (wolf.bytecraft.au.com [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 22417-04; Thu, 1 Jun 2006 01:13:00 +0000 (GMT) Received: from svmarshal.bytecraft.au.com ([10.0.0.4]) by wolf.bytecraft.au.com (8.12.11/8.12.11) with ESMTP id k511BNL1022750; Thu, 1 Jun 2006 11:11:23 +1000 (EST) (envelope-from MTaylor@bytecraft.com.au) Received: from svmailmel.bytecraft.internal (Not Verified[10.0.0.24]) by svmarshal.bytecraft.au.com with MailMarshal (v5, 0, 3, 78) id ; Thu, 01 Jun 2006 11:11:23 +1000 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 Date: Thu, 1 Jun 2006 11:11:21 +1000 Message-ID: <04E232FDCD9FBE43857F7066CAD3C0F117CD63@svmailmel.bytecraft.internal> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: getting alerts about system upgrades Thread-Index: AcaFFjAh+H3TrSc8RzmVCurbN/LrmgAAULdg From: "Murray Taylor" To: "Andrew McNaughton" , "Bill Moran" Cc: freebsd-questions@freebsd.org Subject: RE: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:13:21 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org=20 > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of=20 > Andrew McNaughton > Sent: Thursday, 1 June 2006 10:54 AM > To: Bill Moran > Cc: freebsd-questions@freebsd.org > Subject: Re: getting alerts about system upgrades >=20 > On Wed, 31 May 2006, Bill Moran wrote: >=20 > > On Wed, 31 May 2006 23:22:16 +1200 (NZST) Andrew McNaughton=20 > > wrote: > >> > >> portaudit gives me alerts when security issues arise in installed=20 > >> ports, and portversion keeps me abreast of less critical updates. =20 > >> It's a whole lot easier than the old situation of tracking the=20 > >> security lists every day. > >> > >> Is there a comparably easy way to track available and critical=20 > >> upgrades for the FreeBSD core? > > > > The canonical way to do this is to subscribe to announce@ and/or=20 > > security-announce@freebsd.org. Very low traffic, but=20 > important stuff=20 > > you need to know comes through those channels. >=20 > I do that, but my mailbox gets lots of traffic. Sometimes I=20 > miss something, and as far as I know, there's then no way=20 > system to keep reminding me, nor a way to quickly check the=20 > current state of play. >=20 > Andrew >=20 >=20 > ------------------------------------------------------------------- > Andrew McNaughton http://www.scoop.co.nz/ > andrew@scoop.co.nz Mobile: +61 422 753 792 > pgp keyid: 1C7A8CFD > -- > "We are trying to figure out how you conduct a war against=20 > something other than a nation-state and how ... you conduct a=20 > war in countries > that you are not at war with," -- Donald Rumsfeld, 27 Jan 2006 I find that using folders / pidgeon holes that the mailer can filter things into works well. I have a freebsd-question, freebsd-small=20 etc etc . The rules then presort inbound for me .. and=20 if it doesnt match a rule it lands in the normal INBOX.. I have used Cyrus / Sieve for this at home, and also do it in=20 (ptui) outlook at the office... HTH Murray Taylor Special Projects Engineer Bytecraft Systems P: +61 3 8710 2555 F: +61 3 8710 2599 D: +61 3 9238 4275 E: mtaylor@bytecraft.com.au=20 -- "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." --Albert Einstein=20 --------------------------------------------------------------- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material.=20 E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --------------------------------------------------------------- ***This Email has been scanned for Viruses by MailMarshal.*** From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:32:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 85F8F16A7BB for ; Thu, 1 Jun 2006 01:32:22 +0000 (UTC) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (a2.scoop.co.nz [202.50.109.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4D27743D46 for ; Thu, 1 Jun 2006 01:32:20 +0000 (GMT) (envelope-from andrew@scoop.co.nz) Received: from a2.scoop.co.nz (localhost [127.0.0.1]) by a2.scoop.co.nz (8.13.6/8.13.1) with ESMTP id k511W9N4012706; Thu, 1 Jun 2006 13:32:09 +1200 (NZST) (envelope-from andrew@scoop.co.nz) Received: from localhost (andrew@localhost) by a2.scoop.co.nz (8.13.6/8.13.1/Submit) with ESMTP id k511W9tL012703; Thu, 1 Jun 2006 13:32:09 +1200 (NZST) (envelope-from andrew@scoop.co.nz) X-Authentication-Warning: a2.scoop.co.nz: andrew owned process doing -bs Date: Thu, 1 Jun 2006 13:32:09 +1200 (NZST) From: Andrew McNaughton To: Murray Taylor In-Reply-To: <04E232FDCD9FBE43857F7066CAD3C0F117CD63@svmailmel.bytecraft.internal> Message-ID: <20060601132636.O62075@a2.scoop.co.nz> References: <04E232FDCD9FBE43857F7066CAD3C0F117CD63@svmailmel.bytecraft.internal> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-2.0 (a2.scoop.co.nz [127.0.0.1]); Thu, 01 Jun 2006 13:32:09 +1200 (NZST) X-Virus-Scanned: ClamAV 0.88.1/1504/Thu Jun 1 07:59:14 2006 on a2.scoop.co.nz X-Virus-Status: Clean Cc: freebsd-questions@freebsd.org, Bill Moran Subject: RE: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:32:26 -0000 On Thu, 1 Jun 2006, Murray Taylor wrote: >> -----Original Message----- >> From: owner-freebsd-questions@freebsd.org >> [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of >> Andrew McNaughton >> >> On Wed, 31 May 2006, Bill Moran wrote: >> >>> On Wed, 31 May 2006 23:22:16 +1200 (NZST) Andrew McNaughton >>> wrote: >>>> >>>> portaudit gives me alerts when security issues arise in installed >>>> ports, and portversion keeps me abreast of less critical updates. >>>> It's a whole lot easier than the old situation of tracking the >>>> security lists every day. >>>> >>>> Is there a comparably easy way to track available and critical >>>> upgrades for the FreeBSD core? >>> >>> The canonical way to do this is to subscribe to announce@ and/or >>> security-announce@freebsd.org. Very low traffic, but >> important stuff >>> you need to know comes through those channels. >> >> I do that, but my mailbox gets lots of traffic. Sometimes I >> miss something, and as far as I know, there's then no way >> system to keep reminding me, nor a way to quickly check the >> current state of play. >> > > I find that using folders / pidgeon holes that the mailer > can filter things into works well. I have a freebsd-question, > freebsd-small > etc etc . The rules then presort inbound for me .. and > if it doesnt match a rule it lands in the normal INBOX.. Helpful I'm sure, but I'm not new to email. I've got extensive filtering in place, but there's a lot of irregular stuff that doesn't match rules, and sorting stuff like security-announce into a separate mailbox would just put it out of sight where it's easier to miss. Andrew ------------------------------------------------------------------- Andrew McNaughton http://www.scoop.co.nz/ andrew@scoop.co.nz Mobile: +61 422 753 792 pgp keyid: 1C7A8CFD -- "We are trying to figure out how you conduct a war against something other than a nation-state and how ... you conduct a war in countries that you are not at war with," -- Donald Rumsfeld, 27 Jan 2006 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:49:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E7C7D16A457 for ; Thu, 1 Jun 2006 01:49:04 +0000 (UTC) (envelope-from levicc00123@gmail.com) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 71D4A43D48 for ; Thu, 1 Jun 2006 01:49:04 +0000 (GMT) (envelope-from levicc00123@gmail.com) Received: by wr-out-0506.google.com with SMTP id 70so161928wra for ; Wed, 31 May 2006 18:49:01 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:from:to:subject:date:mime-version:content-type:x-mailer:x-mimeole:thread-index:message-id; b=Dh2lXItTSIB0Ur4ZrpZ3/zOqk5VccLPIRt3Qjx1uqEaZ8xy7dQVcFmHWhMDEbwkuJU2aXUoqpi//CnqxEHYSEVvDGHJr3ClREeYJxis/tBXqmRAo/ZwpuihqZXEjJtInVK/SILt7lWwt0HSS9+xCXOs0AQBTAppJVjN9vcrHr+o= Received: by 10.54.94.16 with SMTP id r16mr162051wrb; Wed, 31 May 2006 18:49:01 -0700 (PDT) Received: from knghtbrd ( [64.187.76.159]) by mx.gmail.com with ESMTP id 26sm235097wra.2006.05.31.18.48.59; Wed, 31 May 2006 18:49:01 -0700 (PDT) From: "Levi Campbell" To: Date: Wed, 31 May 2006 19:48:55 -0600 MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook, Build 11.0.5510 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaFHYpiuzi79t+oSLaJ0TxCPVfyTw== Message-ID: <447e478d.6980d6a8.3d8a.6da8@mx.gmail.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:49:08 -0000 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:50:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A209A16A53C for ; Thu, 1 Jun 2006 01:50:27 +0000 (UTC) (envelope-from doug@fledge.watson.org) Received: from fledge.watson.org (fledge.watson.org [209.31.154.41]) by mx1.FreeBSD.org (Postfix) with ESMTP id 33F8543D46 for ; Thu, 1 Jun 2006 01:50:27 +0000 (GMT) (envelope-from doug@fledge.watson.org) Received: from fledge.watson.org (localhost.watson.org [127.0.0.1]) by fledge.watson.org (8.13.4/8.13.4) with ESMTP id k511oP1i010355; Wed, 31 May 2006 21:50:25 -0400 (EDT) (envelope-from doug@fledge.watson.org) Received: from localhost (doug@localhost) by fledge.watson.org (8.13.4/8.13.4/Submit) with ESMTP id k511oOoL010352; Wed, 31 May 2006 21:50:25 -0400 (EDT) (envelope-from doug@fledge.watson.org) Date: Wed, 31 May 2006 21:50:24 -0400 (EDT) From: doug To: Atanas Atanasov In-Reply-To: Message-ID: <20060531213231.T9892@fledge.watson.org> References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: freebsd-questions@freebsd.org Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:50:28 -0000 In 6.1 you do not need to recompile the kernel. You can load the drivers. kldstat will tell you what you have loaded. check 'man if_ndis' and/or the handbook for configuration setting, chipsets, etc. you can just do: cd /boot/kernel kldload wlan.ko kldload if_ndis.ko You may need the wep dirver if you are using encryption. After all that works, you can load by adding to /boot/loader.conf: if_ndis_load="YES" wlan_load="YES" This is just a guide. I have a thinkpad so I am not sure if the above is complete. In addition to the handbook and the man pages, you can find a lot of information via Google. Hope this helps. On Wed, 31 May 2006, Atanas Atanasov wrote: > I am quite new to FreeBSD. Could you please explain what do you mean > by "recompiled kernel to be sure that the wireless support is > included". Do you mean to create a kernel config with ndis and if_ndis > statically linked into it? I haven't done this one so far. > > Atanas > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:55:02 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7EEC716AB8D for ; Thu, 1 Jun 2006 01:55:02 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 63B8943D6E for ; Thu, 1 Jun 2006 01:54:54 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id 487A11A4DBE; Wed, 31 May 2006 18:54:54 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id B55CB515DC; Wed, 31 May 2006 21:54:53 -0400 (EDT) Date: Wed, 31 May 2006 21:54:53 -0400 From: Kris Kennaway To: Joe Message-ID: <20060601015453.GA5518@xor.obsecurity.org> References: <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> <447D834A.90000@freedomcircle.net> <20060531150245.GA64716@xor.obsecurity.org> <447E0518.50803@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="opJtzjQTFsWo+cga" Content-Disposition: inline In-Reply-To: <447E0518.50803@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:55:05 -0000 --opJtzjQTFsWo+cga Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, May 31, 2006 at 05:05:28PM -0400, Joe wrote: > Kris Kennaway wrote: > >Anyway, retry the binary upgrade as you say. >=20 > The binary upgrade started from the 6.0-RELEASE CD-ROM didn't work Wait, you were trying to update to 6.1-RELEASE using the 6.0-RELEASE CD-ROM? :) Kris --opJtzjQTFsWo+cga Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEfkjtWry0BWjoQKURAj9/AJ4nphfX5/QiC/Hmc1TNY2j8Y/pKyQCgl/M2 OLd5fujwjW5DclSRcczo5Uo= =Ktmh -----END PGP SIGNATURE----- --opJtzjQTFsWo+cga-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 01:58:12 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4623C16AB07 for ; Thu, 1 Jun 2006 01:58:12 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2D8A43D73 for ; Thu, 1 Jun 2006 01:58:08 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so160032nzf for ; Wed, 31 May 2006 18:58:08 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=OvY99PUnBsIswLwdyJlLawChGPOtg05j5xeiYHZ26ZkftdfTTbAtGEXANZ2m+brh2Ks94g2FQjdx1UJ0rI9L1v4PArrTJY24sxymSX/fKO/Iym+FtBSLeQj4GvZcSlDOlMxwjwD3jSbYEdx2AUaGpYlBmDbhAXI0KKp7vodwMlU= Received: by 10.36.247.54 with SMTP id u54mr136841nzh; Wed, 31 May 2006 18:58:08 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Wed, 31 May 2006 18:58:08 -0700 (PDT) Message-ID: Date: Wed, 31 May 2006 20:58:08 -0500 From: "Nikolas Britton" To: "FreeBSD Mailing List" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Replacing Sendmail with Postfix? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 01:58:19 -0000 Hey did anyone see the article on /. about Sendmail being removed from NetBSD, and being replaced with Postfix? What advice can you offer about doing this on FreeBSD? What's involved, How do you do it, are there any gotta's (cron scripts?), etc?.... Is it just as simple as installing the Postfix port? How do you stop buildworld from reinstalling sendmail? /etc/mail/mailer.conf? Oh hmm, I see there's a section in the FreeBSD handbook that deals with this topic... Oh well I've already wrote this much... maybe you guy and gals have something more to add. Thanks! -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:09:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 53D8416A632 for ; Thu, 1 Jun 2006 02:09:06 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8C57D43D48 for ; Thu, 1 Jun 2006 02:09:05 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k5128bPp045941; Wed, 31 May 2006 21:08:48 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <447E4C1D.8020305@daleco.biz> Date: Wed, 31 May 2006 21:08:29 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Levi Campbell References: <447e478d.6980d6a8.3d8a.6da8@mx.gmail.com> In-Reply-To: <447e478d.6980d6a8.3d8a.6da8@mx.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:09:08 -0000 Levi Campbell wrote: > 911? Seriously? Type something, then push "send". You might get a better result. Nothing personal at all; but, your message was blank, except for the subject line. Kevin Kinsey -- A drama critic is a person who surprises a playwright by informing him what he meant. -- Wilson Mizner From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:17:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43D5B16A72E for ; Thu, 1 Jun 2006 02:17:04 +0000 (UTC) (envelope-from jhorne@dfwlp.com) Received: from zeus.int.dfwlp.com (zeus.dfwlp.com [208.11.134.127]) by mx1.FreeBSD.org (Postfix) with ESMTP id EE36D43D45 for ; Thu, 1 Jun 2006 02:17:03 +0000 (GMT) (envelope-from jhorne@dfwlp.com) Received: from mazeltov.publicis-usa.com ([167.246.36.14]) (authenticated bits=0) by zeus.int.dfwlp.com (8.13.6/8.13.6) with ESMTP id k512GvKN065531 for ; Wed, 31 May 2006 21:16:57 -0500 (CDT) (envelope-from jhorne@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 21:16:39 -0500 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200605312116.39802.jhorne@dfwlp.com> X-Spam-Status: No, score=-1.4 required=5.0 tests=ALL_TRUSTED autolearn=failed version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on zeus.int.dfwlp.com Subject: system recovery X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:17:05 -0000 ok, i trashed my system (being dumb!), and now im preparing to try to get it back, and my goal is to try to skip the 38 hour kde compile from ports (yes, i like ports, not packages). before i burned it all down, i did make a tarball of /. i did try to untar it with -C /, but it got about 5 seconds into it, hit a lib it didnt like the version of (must have been something *REAL* important), as the system locked up as hard as it could be. so, i would like to begin by trying to skip the buildworld and buildkernel. i still have my entire /usr/src directory, so could i realistically just untar that into /usr/src, boot to single, and proceed with mergemaster/make installworld'ing? or, can someone recommend how i might use that tarball of my entire system to quickly get a new system up and running (all this with the assumtion that i have not changed any hardware configurations). if someone has time to answer quickly, i would sure appreciate it. thanks a bunch, jonathan From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:23:02 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D544416A5EB for ; Thu, 1 Jun 2006 02:23:02 +0000 (UTC) (envelope-from dev@freedomcircle.net) Received: from vms046pub.verizon.net (vms046pub.verizon.net [206.46.252.46]) by mx1.FreeBSD.org (Postfix) with ESMTP id 858C443D46 for ; Thu, 1 Jun 2006 02:23:02 +0000 (GMT) (envelope-from dev@freedomcircle.net) Received: from [192.169.1.2] ([71.101.6.8]) by vms046.mailsrvcs.net (Sun Java System Messaging Server 6.2-4.02 (built Sep 9 2005)) with ESMTPA id <0J050087VTACKLV7@vms046.mailsrvcs.net> for questions@FreeBSD.org; Wed, 31 May 2006 21:23:02 -0500 (CDT) Date: Wed, 31 May 2006 22:23:46 -0400 From: Joe In-reply-to: <20060601015453.GA5518@xor.obsecurity.org> To: Kris Kennaway Message-id: <447E4FB2.7040506@freedomcircle.net> Organization: Freedom Circle, LLC MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: <20060530002535.GA94917@xor.obsecurity.org> <447CB067.1080309@freedomcircle.net> <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> <447D834A.90000@freedomcircle.net> <20060531150245.GA64716@xor.obsecurity.org> <447E0518.50803@freedomcircle.net> <20060601015453.GA5518@xor.obsecurity.org> User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) Cc: questions@FreeBSD.org Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:23:03 -0000 Kris Kennaway wrote: > On Wed, May 31, 2006 at 05:05:28PM -0400, Joe wrote: >> Kris Kennaway wrote: >>> Anyway, retry the binary upgrade as you say. >> The binary upgrade started from the 6.0-RELEASE CD-ROM didn't work > > Wait, you were trying to update to 6.1-RELEASE using the 6.0-RELEASE > CD-ROM? :) Yes, I mentioned that a couple of times before. However, in the options screen, I requested the *6.1-RELEASE* to be fetched, and it did do that--except for the kernel, or actually it seems it fetched that too but it was unable to move it into place. I'm fairly knew at FreeBSD (but definitely not at software) and I don't see why I shouldn't be able to upgrade an OS starting from the earlier release, i.e., without having to bootstrap from the new release, particularly when upgrading within the same major release, from one minor to the next. Joe From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:26:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B8DB516C3CE for ; Thu, 1 Jun 2006 02:26:48 +0000 (UTC) (envelope-from kirk@strauser.com) Received: from kanga.honeypot.net (kanga.honeypot.net [208.162.254.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id 351C043D45 for ; Thu, 1 Jun 2006 02:26:47 +0000 (GMT) (envelope-from kirk@strauser.com) Received: from localhost (localhost [127.0.0.1]) by kanga.honeypot.net (Postfix) with ESMTP id F1F5896620 for ; Wed, 31 May 2006 21:26:46 -0500 (CDT) X-Virus-Scanned: amavisd-new at honeypot.net Received: from kanga.honeypot.net ([127.0.0.1]) by localhost (kanga.honeypot.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id PWp48RLsjAoh for ; Wed, 31 May 2006 21:26:46 -0500 (CDT) Received: from kanga.honeypot.net (unknown [IPv6:2001:470:1f01:224:1::2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by kanga.honeypot.net (Postfix) with ESMTP id 176A095DA0 for ; Wed, 31 May 2006 21:26:46 -0500 (CDT) From: Kirk Strauser To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 21:26:38 -0500 User-Agent: KMail/1.9.1 References: <200605311335.54004.don.hinton@vanderbilt.edu> In-Reply-To: <200605311335.54004.don.hinton@vanderbilt.edu> X-Face: &'; cS03F?rr_w2Qce.d2f7xmwXfcJWDs>}CkpDw.c]ZJJ_)i0Nx Subject: Re: Using Flash on FreeBSD [Fwd: Macromedia Customer Service Request [8564611]] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:26:51 -0000 --nextPart1434654.SJHQiztjsr Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Wednesday 31 May 2006 13:35, Don Hinton wrote: > It is not that the web player is prohibited in FreeBSD, but the operating > system itself is not compatible with Player. [...] > although it is clearly stated on the End User License Agreement, the only > authorized operating systems where you may download and install Flash > Player.=20 Gee, I think I can see where the confusion is coming from. =2D-=20 Kirk Strauser --nextPart1434654.SJHQiztjsr Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEflBk5sRg+Y0CpvERAgioAJ0TTx3RfY3BPdYH9rQ0ZOilPv26KACfWmdi Mb0/KU01dzDmOh5G94sR34Q= =+0Uh -----END PGP SIGNATURE----- --nextPart1434654.SJHQiztjsr-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:28:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E707516C23D for ; Thu, 1 Jun 2006 02:28:40 +0000 (UTC) (envelope-from kirk@strauser.com) Received: from kanga.honeypot.net (kanga.honeypot.net [208.162.254.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3820943D5F for ; Thu, 1 Jun 2006 02:28:39 +0000 (GMT) (envelope-from kirk@strauser.com) Received: from localhost (localhost [127.0.0.1]) by kanga.honeypot.net (Postfix) with ESMTP id 8245D96620 for ; Wed, 31 May 2006 21:28:38 -0500 (CDT) X-Virus-Scanned: amavisd-new at honeypot.net Received: from kanga.honeypot.net ([127.0.0.1]) by localhost (kanga.honeypot.net [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 9EvIpymagkBT for ; Wed, 31 May 2006 21:28:37 -0500 (CDT) Received: from kanga.honeypot.net (unknown [IPv6:2001:470:1f01:224:1::2]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by kanga.honeypot.net (Postfix) with ESMTP id 7637A95DA0 for ; Wed, 31 May 2006 21:28:37 -0500 (CDT) From: Kirk Strauser To: freebsd-questions@freebsd.org Date: Wed, 31 May 2006 21:28:36 -0500 User-Agent: KMail/1.9.1 References: In-Reply-To: X-Face: &'; cS03F?rr_w2Qce.d2f7xmwXfcJWDs>}CkpDw.c]ZJJ_)i0Nx Subject: Re: Replacing Sendmail with Postfix? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:28:54 -0000 --nextPart63902236.hQImrlzAca Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Wednesday 31 May 2006 20:58, Nikolas Britton wrote: > Is it just as simple as installing the Postfix port? Yes, and following the directions that from "pkg-message" in the port. You= 'll=20 still call a binary called "sendmail" from scripts, but the call will be=20 directed to Postfix via mailer.conf. =2D-=20 Kirk Strauser --nextPart63902236.hQImrlzAca Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEflDU5sRg+Y0CpvERAkAQAJwIbKCiLNKi3kUoMI5pSU6tCfUupQCfaDF5 npLdBfu0PomFAqCnfCqebek= =a312 -----END PGP SIGNATURE----- --nextPart63902236.hQImrlzAca-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:30:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E80316C29B for ; Thu, 1 Jun 2006 02:30:14 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 481D743D7C for ; Thu, 1 Jun 2006 02:30:12 +0000 (GMT) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id k512Sle5027630 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 1 Jun 2006 09:28:47 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.3/8.12.11) id k512SlPU084575; Thu, 1 Jun 2006 09:28:47 +0700 (ICT) Date: Thu, 1 Jun 2006 09:28:47 +0700 (ICT) Message-Id: <200606010228.k512SlPU084575@banyan.cs.ait.ac.th> From: Olivier Nicole To: jhorne@dfwlp.com In-reply-to: <200605312116.39802.jhorne@dfwlp.com> (message from Jonathan Horne on Wed, 31 May 2006 21:16:39 -0500) References: <200605312116.39802.jhorne@dfwlp.com> X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Cc: freebsd-questions@freebsd.org Subject: Re: system recovery X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:30:43 -0000 > or, can someone recommend how i might use that tarball of my entire > system to quickly get a new system up and running (all this with the > assumtion that i have not changed any hardware configurations). if > someone has time to answer quickly, i would sure appreciate it. I think that the recovery system that lies on one of the CDs has tar. You could boot the recovery system and untar the things. Olivier From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:34:00 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 876E016A9F3 for ; Thu, 1 Jun 2006 02:34:00 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 07CE143D48 for ; Thu, 1 Jun 2006 02:34:00 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id D8E3E1A4DBE; Wed, 31 May 2006 19:33:59 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id A313051744; Wed, 31 May 2006 22:33:58 -0400 (EDT) Date: Wed, 31 May 2006 22:33:57 -0400 From: Kris Kennaway To: Joe Message-ID: <20060601023356.GA5927@xor.obsecurity.org> References: <20060530213344.GA34025@xor.obsecurity.org> <447CC3C8.9020300@freedomcircle.net> <20060530222808.GA34725@xor.obsecurity.org> <447CDF69.4030704@freedomcircle.net> <20060531004426.GA36958@xor.obsecurity.org> <447D834A.90000@freedomcircle.net> <20060531150245.GA64716@xor.obsecurity.org> <447E0518.50803@freedomcircle.net> <20060601015453.GA5518@xor.obsecurity.org> <447E4FB2.7040506@freedomcircle.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="pWyiEgJYm5f9v55/" Content-Disposition: inline In-Reply-To: <447E4FB2.7040506@freedomcircle.net> User-Agent: Mutt/1.4.2.1i Cc: questions@FreeBSD.org, Kris Kennaway Subject: Re: pkg_upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:34:03 -0000 --pWyiEgJYm5f9v55/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, May 31, 2006 at 10:23:46PM -0400, Joe wrote: > Kris Kennaway wrote: > >On Wed, May 31, 2006 at 05:05:28PM -0400, Joe wrote: > >>Kris Kennaway wrote: > >>>Anyway, retry the binary upgrade as you say. > >>The binary upgrade started from the 6.0-RELEASE CD-ROM didn't work > > > >Wait, you were trying to update to 6.1-RELEASE using the 6.0-RELEASE > >CD-ROM? :) >=20 > Yes, I mentioned that a couple of times before. However, in the options= =20 > screen, I requested the *6.1-RELEASE* to be fetched, and it did do=20 > that--except for the kernel, or actually it seems it fetched that too=20 > but it was unable to move it into place. >=20 > I'm fairly knew at FreeBSD (but definitely not at software) and I don't= =20 > see why I shouldn't be able to upgrade an OS starting from the earlier=20 > release, i.e., without having to bootstrap from the new release,=20 > particularly when upgrading within the same major release, from one=20 > minor to the next. The necessary steps for upgrading from an old release to the current one sometimes change. The old release doesn't know all of the future upgrading procedures for subsequent releases. That's almost certainly what went on here. Kris --pWyiEgJYm5f9v55/ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEflIUWry0BWjoQKURAuwLAKCbshxpDJFdXBWLrrAEPkLUK+L1fACfT+Bq ax+ugMx6J7SN+baQWFtNFxk= =Wxk4 -----END PGP SIGNATURE----- --pWyiEgJYm5f9v55/-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 02:45:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D46ED16A71F for ; Thu, 1 Jun 2006 02:45:44 +0000 (UTC) (envelope-from snnn119@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id 222DF43D48 for ; Thu, 1 Jun 2006 02:45:43 +0000 (GMT) (envelope-from snnn119@gmail.com) Received: by py-out-1112.google.com with SMTP id z74so150003pyg for ; Wed, 31 May 2006 19:45:43 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:disposition-notification-to:date:from:reply-to:organization:user-agent:mime-version:to:subject:references:in-reply-to:content-type:content-transfer-encoding; b=igO5KaKfDf5kQL3SHIKDYroL2bvCdciPLepFbP6e/GW2QM3NukMkQLE9WiEp76n2hy/Ev6Uj7mwCRQJ1BVa3dzoJFyJC1EBr48XCYQnuHbtL+Ju38j+z/bCM7P4Hwif/VDeA4nPI5p1Q1oiQdDvizc2z0mfJk2JCBuX0EJ3RBt0= Received: by 10.35.123.2 with SMTP id a2mr213493pyn; Wed, 31 May 2006 19:45:43 -0700 (PDT) Received: from ?222.187.43.219? ( [222.187.43.219]) by mx.gmail.com with ESMTP id w25sm25828pyw.2006.05.31.19.45.41; Wed, 31 May 2006 19:45:42 -0700 (PDT) Message-ID: <447E54D4.909@gmail.com> Date: Thu, 01 Jun 2006 10:45:40 +0800 From: snnn Organization: snnn User-Agent: Thunderbird 1.5 (X11/20060412) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <447D53FE.5000003@gmail.com> <447DA6D2.2020605@cs.tu-berlin.de> In-Reply-To: <447DA6D2.2020605@cs.tu-berlin.de> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: snnn119@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 02:45:50 -0000 Björn König wrote: > I don't know exactly who says "Illegal instruction" in your case, but > I would take it as a hint that you try to execute code that doesn't > work with your CPU. Did you compiled ruby yourself and used special > CFLAGS? What kind of CPU do you use? > yes,I've installed every package from ports,so ruby is compiled by myself also. This is the my make.conf WITH_SETUID_LUIT=true SUPHOST=cvsup.FreeBSD.org CPUTYPE=athlon-xp MAKE_IDE=true ENABLE_SUID_SSH=true NO_BLUETOOTH=true DOC_LANG=zh_CN APACHE2=true CJK=true CUPS=false DVD=true DVDNAV=true DVDREAD=true ESOUND=true EXAMPLES=true FAAD=true FAAC=true FLAC=true GNOME=true GSTREAMER=true GTK2=true IMAGEMAGICK=true LAME=true LINUX=true LIVEMEDIA=true LZO=true MAD=true MMX=true MATROSKA=true MYSQL=true NCURSES=true OGG=true OPENGL=true POP3=true SDL=true SSE=true SSL=true X11=true XINE=true VORBIS=true XVID=ture X264=true WITH_LIB32=yes WITH_SASL=yes WITH_GDBM=yes WITH_SDL=yes WITH_MGA=yes WITH_GNOME=yes WITH_SASL=yes WITH_THREADS=yes ENABLE_SUIDPERL=yes WITH_GS=yes WITH_EXTRA_PATCHES=yes WITH_XPM=yes WITH_CPUFLAGS=yes WITH_OPTIMIZED_CFLAGS=yes WITH_VIDIX=yes ASPELL_EN=yes APR_UTIL_WITH_BERKELEY_DB=yes MASTER_SITE_OVERRIDE= \ http://ports.hshh.org/${DIST_SUBDIR}/\ ftp://61.241.82.63/pub/FreeBSD/ports/distfiles/ \ ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/ FETCH_CMD= wget FETCH_BEFORE_ARGS= -c -t 1 FETCH_AFTER_ARGS= DISABLE_SIZE=yes PERL_VER=5.8.8 PERL_VERSION=5.8.8 KERNCONF=snnn Is it because of optimizing of AlthonXP ? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 03:07:07 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 53C8016A7A0 for ; Thu, 1 Jun 2006 03:07:07 +0000 (UTC) (envelope-from kris@obsecurity.org) Received: from elvis.mu.org (elvis.mu.org [192.203.228.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1505243D49 for ; Thu, 1 Jun 2006 03:07:07 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: from obsecurity.dyndns.org (elvis.mu.org [192.203.228.196]) by elvis.mu.org (Postfix) with ESMTP id CC4061A4DBA; Wed, 31 May 2006 20:07:06 -0700 (PDT) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 4D9D551313; Wed, 31 May 2006 23:07:06 -0400 (EDT) Date: Wed, 31 May 2006 23:07:06 -0400 From: Kris Kennaway To: snnn Message-ID: <20060601030705.GA6337@xor.obsecurity.org> References: <447D53FE.5000003@gmail.com> <447DA6D2.2020605@cs.tu-berlin.de> <447E54D4.909@gmail.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="LQksG6bCIzRHxTLp" Content-Disposition: inline In-Reply-To: <447E54D4.909@gmail.com> User-Agent: Mutt/1.4.2.1i Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 03:07:07 -0000 --LQksG6bCIzRHxTLp Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Jun 01, 2006 at 10:45:40AM +0800, snnn wrote: > Bj?rn K?nig wrote: > >I don't know exactly who says "Illegal instruction" in your case, but=20 > >I would take it as a hint that you try to execute code that doesn't=20 > >work with your CPU. Did you compiled ruby yourself and used special=20 > >CFLAGS? What kind of CPU do you use? > > >=20 > yes,I've installed every package from ports,so ruby is compiled by=20 > myself also. > This is the my make.conf > WITH_SETUID_LUIT=3Dtrue > SUPHOST=3Dcvsup.FreeBSD.org > CPUTYPE=3Dathlon-xp > MAKE_IDE=3Dtrue > ENABLE_SUID_SSH=3Dtrue > NO_BLUETOOTH=3Dtrue > DOC_LANG=3Dzh_CN > APACHE2=3Dtrue > CJK=3Dtrue > CUPS=3Dfalse > DVD=3Dtrue A lot of these are invalid, i.e. not the correct name. > Is it because of optimizing of AlthonXP ? Probably, are you sure that is the CPU you have? Kris --LQksG6bCIzRHxTLp Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEflnZWry0BWjoQKURAsLDAJwN42PBdazYRha1fyn233ubRqF/jQCfW0An hvuA8ZuSvJrQcjPz8TDmmX0= =ysyS -----END PGP SIGNATURE----- --LQksG6bCIzRHxTLp-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 03:08:04 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 876C616AA3D for ; Thu, 1 Jun 2006 03:08:04 +0000 (UTC) (envelope-from pauls@utdallas.edu) Received: from mail.stovebolt.com (mail.stovebolt.com [66.221.101.248]) by mx1.FreeBSD.org (Postfix) with ESMTP id C527543D5A for ; Thu, 1 Jun 2006 03:08:03 +0000 (GMT) (envelope-from pauls@utdallas.edu) Received: from [192.168.2.101] (adsl-66-141-179-77.dsl.rcsntx.swbell.net [66.141.179.77]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.stovebolt.com (Postfix) with ESMTP id 72591114313 for ; Wed, 31 May 2006 22:00:00 -0500 (CDT) Date: Wed, 31 May 2006 22:06:44 -0500 From: Paul Schmehl To: FreeBSD Mailing List Message-ID: In-Reply-To: References: X-Mailer: Mulberry/4.0.0 (Mac OS X) MIME-Version: 1.0 Content-Type: multipart/signed; micalg=sha1; protocol="application/pkcs7-signature"; boundary="==========37AA5D8B126B52089B5C==========" X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: Replacing Sendmail with Postfix? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 03:08:04 -0000 --==========37AA5D8B126B52089B5C========== Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline --On May 31, 2006 8:58:08 PM -0500 Nikolas Britton=20 wrote: > Hey did anyone see the article on /. about Sendmail being removed from > NetBSD, and being replaced with Postfix? > > What advice can you offer about doing this on FreeBSD? What's > involved, How do you do it, are there any gotta's (cron scripts?), > etc?.... Is it just as simple as installing the Postfix port? How do > you stop buildworld from reinstalling sendmail? /etc/mail/mailer.conf? > > Oh hmm, I see there's a section in the FreeBSD handbook that deals > with this topic... Oh well I've already wrote this much... maybe you > guy and gals have something more to add. > make install clean - follow the instructions in the pkg-message file -=20 done. (Except for any configuration you need to do. If it's a standalone=20 server to send mail from localhost, you don't need to do anything to get it = working.) Paul Schmehl (pauls@utdallas.edu) Adjunct Information Security Officer The University of Texas at Dallas http://www.utdallas.edu/ir/security/ --==========37AA5D8B126B52089B5C==========-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 04:31:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6BBD016B80A for ; Thu, 1 Jun 2006 04:31:41 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9EEB443D4C for ; Thu, 1 Jun 2006 04:31:39 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 27179 invoked by uid 507); 1 Jun 2006 14:31:38 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 1 Jun 2006 14:31:38 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <20060531133230.7D73943D6B@mx1.FreeBSD.org> References: <20060531133230.7D73943D6B@mx1.FreeBSD.org> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: <192c377948a2a44244956738249837e4@pacific.net.au> Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Thu, 1 Jun 2006 14:31:37 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 04:32:00 -0000 On 31/05/2006, at 11:30 PM, Steve Bertrand wrote: > > Take a look at the 'ServerName' directive in your httpd.conf file. Try > uncommenting said directive, and put your IP address beside it. This line is already in place ServerName 127.0.0.1:80 malcolm From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 05:49:09 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 73E9616BADB for ; Thu, 1 Jun 2006 05:49:09 +0000 (UTC) (envelope-from gil@asol.com.ph) Received: from mail.asol.com.ph (mx1.asol.com.ph [203.190.72.164]) by mx1.FreeBSD.org (Postfix) with SMTP id 3EED643D45 for ; Thu, 1 Jun 2006 05:49:07 +0000 (GMT) (envelope-from gil@asol.com.ph) Received: (qmail 98850 invoked by uid 1010); 1 Jun 2006 05:40:43 -0000 Received: from 203.208.25.30 by mail.asol.com.ph (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/1356. spamassassin: 3.1.1. perlscan: 1.25-st-qms. Clear:RC:0(203.208.25.30):SA:0(-2.5/5.0):. Processed in 1.569143 secs); 01 Jun 2006 05:40:43 -0000 X-Spam-Status: No, hits=-2.5 required=5.0 X-Antivirus-ASPI-Mail-From: gil@asol.com.ph via mail.asol.com.ph X-Antivirus-ASPI: 1.25-st-qms (Clear:RC:0(203.208.25.30):SA:0(-2.5/5.0):. Processed in 1.569143 secs Process 98842) Received: from unknown (HELO loui) (gil@asol.com.ph@203.208.25.30) by mail.asol.com.ph with SMTP; 1 Jun 2006 05:40:41 -0000 Message-ID: <006301c6853f$1e306600$5ac8a8c0@loui> From: "GiL A. Virtucio" To: References: <447e478d.6980d6a8.3d8a.6da8@mx.gmail.com> Date: Thu, 1 Jun 2006 13:49:11 +0800 MIME-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2869 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Cc: Levi Campbell Subject: Re: help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 05:49:15 -0000 ? hope this helps :P ================================= Gil A. Virtucio Janitor/Kolektor/Messenger/Driver Asia Solution Phillippines Inc. 28/F Antel Global Corporate Center 3 Doña Julia Vargas Avenue, Ortigas Center, Pasig Office # : +63-2-687-0692 loc. 103 Mobile # : +63-916-3989695 http://www.gihl.eu.org/ ================================= ----- Original Message ----- From: "Levi Campbell" To: Sent: Thursday, June 01, 2006 9:48 AM Subject: help > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 07:16:12 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DD70D16AB76 for ; Thu, 1 Jun 2006 07:16:12 +0000 (UTC) (envelope-from rihad@mail.ru) Received: from f21.mail.ru (f21.mail.ru [194.67.57.54]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6598F43D46 for ; Thu, 1 Jun 2006 07:16:12 +0000 (GMT) (envelope-from rihad@mail.ru) Received: from mail by f21.mail.ru with local id 1FlhPc-000PgD-00 for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 11:16:08 +0400 Received: from [217.25.25.67] by win.mail.ru with HTTP; Thu, 01 Jun 2006 11:16:08 +0400 From: =?koi8-r?Q?=F2=C9=C8=C1=C4=20=E7=C1=C4=D6=C9=C5=D7?= To: freebsd-questions@freebsd.org Mime-Version: 1.0 X-Mailer: mPOP Web-Mail 2.19 X-Originating-IP: [217.25.25.67] Date: Thu, 01 Jun 2006 11:16:08 +0400 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Message-Id: Subject: newsyslog.conf wrong count of archive logs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: =?koi8-r?Q?=F2=C9=C8=C1=C4=20=E7=C1=C4=D6=C9=C5=D7?= List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 07:16:14 -0000 I'm using newsyslog (FreeBSD 6.0-RELEASE-p6) to manage Apache's monthly log files. The relevant /etc/newsyslog.conf entry is # logfilename [owner:group] mode count size when flags [/pid_file] [sig_num] /var/log/httpd/*log root:wheel 644 2 * $M1D3 GB /var/run/httpd.pid 30 newsyslog.conf(5) says: count Specify the maximum number of archive files which may exist. This does not consider the current log file. But there already are 3 months worth of archive logs (*.0 *.1 *.2), excluding the current log. What did I do wrong? Thank you. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 07:19:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CE1B516B515 for ; Thu, 1 Jun 2006 07:19:08 +0000 (UTC) (envelope-from coolzone@io.dk) Received: from dansknet.dk (smtp1.dansknet.dk [85.233.229.242]) by mx1.FreeBSD.org (Postfix) with SMTP id E193A43D48 for ; Thu, 1 Jun 2006 07:19:07 +0000 (GMT) (envelope-from coolzone@io.dk) Received: (qmail 8848 invoked from network); 1 Jun 2006 08:02:28 -0000 Received: from 85233229154.switch.dansknet.dk (HELO ?85.233.229.154?) (85.233.229.154) by dansknet.dk with SMTP; 1 Jun 2006 08:02:28 -0000 Message-ID: <447E9540.2020003@io.dk> Date: Thu, 01 Jun 2006 09:20:32 +0200 From: Rico User-Agent: Thunderbird 1.5 (X11/20060317) MIME-Version: 1.0 To: freebsd-chat@freebsd.org, freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: The Unix Haters Handbook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 07:19:09 -0000 Hi all. I had not before seen this book, but doing some Unix research I found it at http://research.microsoft.com/~daniel/uhh-download.html Loving Unix I found the book hilarious and quite entertaining and still containing some truth. The chapter about the "rm" command is very funny because everybody has tried that mistake once. Anyway, wanted to share my discovery. I know many knows this book, but perhaps many also don't. Best and kind regards, Rico From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 07:23:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C3BE416AE2C for ; Thu, 1 Jun 2006 07:23:39 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 01FF943D45 for ; Thu, 1 Jun 2006 07:23:38 +0000 (GMT) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id k517Nbe7072544 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 1 Jun 2006 14:23:37 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.3/8.12.11) id k517Nawx085925; Thu, 1 Jun 2006 14:23:36 +0700 (ICT) Date: Thu, 1 Jun 2006 14:23:36 +0700 (ICT) Message-Id: <200606010723.k517Nawx085925@banyan.cs.ait.ac.th> From: Olivier Nicole To: rihad@mail.ru In-reply-to: (message from =?koi8-r?Q?=F2=C9=C8=C1=C4=20=E7=C1=C4=D6=C9=C5=D7?= on Thu, 01 Jun 2006 11:16:08 +0400) References: X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Cc: freebsd-questions@freebsd.org Subject: Re: newsyslog.conf wrong count of archive logs X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 07:23:45 -0000 > count Specify the maximum number of archive files which may exist. > This does not consider the current log file. >From what i see on a running system, count is the maximum number of the archive log: a count of 2 makes archives .0, .1 and .2 Olivier From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 07:30:17 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E5A116BEEE; Thu, 1 Jun 2006 07:30:17 +0000 (UTC) (envelope-from ml.diespammer@netfence.it) Received: from parrot.aev.net (parrot.aev.net [212.31.247.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id 76ED943D66; Thu, 1 Jun 2006 07:30:14 +0000 (GMT) (envelope-from ml.diespammer@netfence.it) Received: from soth.ventu (adsl-ull-125-192.51-151.net24.it [151.51.192.125]) (authenticated bits=128) by parrot.aev.net (8.13.6/8.13.6) with ESMTP id k517ZjHH024615 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Thu, 1 Jun 2006 09:35:51 +0200 (CEST) (envelope-from ml.diespammer@netfence.it) Received: from [10.1.2.18] (alamar.ventu [10.1.2.18]) by soth.ventu (8.13.6/8.13.3) with ESMTP id k517TkYI086268; Thu, 1 Jun 2006 09:29:46 +0200 (CEST) (envelope-from ml.diespammer@netfence.it) Message-ID: <447E9764.1030107@netfence.it> Date: Thu, 01 Jun 2006 09:29:40 +0200 From: Andrea Venturoli User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Lowell Gilbert , freebsd-questions@freebsd.org, freebsd-openoffice@freebsd.org References: <44slmrr2t2.fsf@be-well.ilk.org> In-Reply-To: <44slmrr2t2.fsf@be-well.ilk.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.53 on 212.31.247.179 Cc: Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 07:30:35 -0000 Lowell Gilbert wrote: > Looks kind of like a problem that was fixed within the last few > days when the port was updated to the next release candidate. > Try updating your ports? Looks kinda not. I've got 2.0.3rc3 and I have the same problem. I reported it several months ago and all I got to be told was that it's a strange problem. bye av. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 08:42:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C401A16A6D4 for ; Thu, 1 Jun 2006 08:42:08 +0000 (UTC) (envelope-from gandalf@messias.qhigh.com) Received: from smtp.enternet.hu (smtp.enternet.hu [62.112.192.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4E79B43D45 for ; Thu, 1 Jun 2006 08:42:08 +0000 (GMT) (envelope-from gandalf@messias.qhigh.com) Received: from [83.216.40.218] (helo=[172.16.0.43]) by smtp.enternet.hu with esmtpa (Exim 4) id 1Flikn-000KfB-0y for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 10:42:05 +0200 Message-ID: <447EA884.8010602@messias.qhigh.com> Date: Thu, 01 Jun 2006 10:42:44 +0200 From: User Gandalf User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-2; format=flowed Content-Transfer-Encoding: 7bit Subject: scponlyc on 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 08:42:13 -0000 Hello, I have installed scponlyc with the chroot option: #cd /usr/ports #cd shells/scponly/ #make -DWITH_SCPONLY_CHROOT I have used scponly on Linux before, so I knew that there is a special makefile inside. #cd work/scponly-4.4/ #make jail I have created a new chrooted, scp only user. Here are the files that were created by 'make jail': ./bin: echo pwd ./etc: pwd.db ./lib: libc.so.6 libcrypt.so.3 libcrypto.so.4 libmd.so.3 libz.so.3 ./libexec: ld-elf.so.1 ./public_html: ./usr: bin lib libexec ./usr/bin: groups id ./usr/lib: libasn1.so.8 libcom_err.so.3 libgssapi.so.8 libkrb5.so.8 libroken.so.8 libssh.so.3 ./usr/libexec: ld-elf.so.1 sftp-server Now if I try to do 'su -l scpuser' then I do not get any error messages but nothing happens. If I try to login with WinSCP, it tells me that my shell is incompatible with bash. Is this a problem with the port? What am I doing wrong? What logfiles should I check? (/var/log/messages tell nothing...) Thanks, Laszlo From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 08:46:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B2E4F16A91F for ; Thu, 1 Jun 2006 08:46:32 +0000 (UTC) (envelope-from snnn119@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 34CD243D45 for ; Thu, 1 Jun 2006 08:46:32 +0000 (GMT) (envelope-from snnn119@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so235366pye for ; Thu, 01 Jun 2006 01:46:31 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:disposition-notification-to:date:from:reply-to:organization:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=BR/4APK8tpnNPkIj/miXXjXjg33no5auehyEt89CWiPcIaLtPcXI9pR+tBkdBbiI3PaTT9vMA++Rm33ZksNb0Fh6IH7EPZyJJHR06pkvzCxcFV0mZ8zj/d7jt94X1/3egbyToQLGZUzOCTXfwiMtQVryFd5S173hOaIe2+Q57Iw= Received: by 10.35.112.3 with SMTP id p3mr482492pym; Thu, 01 Jun 2006 01:46:31 -0700 (PDT) Received: from ?222.187.43.182? ( [222.187.43.182]) by mx.gmail.com with ESMTP id h41sm776685pyh.2006.06.01.01.46.30; Thu, 01 Jun 2006 01:46:31 -0700 (PDT) Message-ID: <447EA964.5070203@gmail.com> Date: Thu, 01 Jun 2006 16:46:28 +0800 From: snnn Organization: snnn User-Agent: Thunderbird 1.5 (X11/20060412) MIME-Version: 1.0 To: Kris Kennaway References: <447D53FE.5000003@gmail.com> <447DA6D2.2020605@cs.tu-berlin.de> <447E54D4.909@gmail.com> <20060601030705.GA6337@xor.obsecurity.org> In-Reply-To: <20060601030705.GA6337@xor.obsecurity.org> Content-Type: text/plain; charset=GB18030; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: snnn119@gmail.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 08:46:33 -0000 Kris Kennaway wrote: > > > A lot of these are invalid, i.e. not the correct name. > > Oh?which one? > Probably, are you sure that is the CPU you have? > > I'm sure. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 08:52:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 569F216A891 for ; Thu, 1 Jun 2006 08:52:06 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.175]) by mx1.FreeBSD.org (Postfix) with ESMTP id A0F7543D46 for ; Thu, 1 Jun 2006 08:52:05 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so119353uge for ; Thu, 01 Jun 2006 01:52:04 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=Eg/wRH3U9b1jLHEzOyPrpqbtQxRsXtOS8OjtZVcHwSjj7F+Hv1fcWNZvlRelwWFKneqv0xfpoXGWNjjJW6HI/RSkzAYc+7Hm5YEWf1DKMzmpVAR6eE5txe7DLM0KFVcI6XCUJ3kMgtyihiriQAaBgQUxPdQUTZGzmnKyYq5YE8I= Received: by 10.78.52.17 with SMTP id z17mr44888huz; Thu, 01 Jun 2006 01:45:57 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Thu, 1 Jun 2006 01:45:57 -0700 (PDT) Message-ID: <18e02bd30606010145i67d08a6bl510b719e7e8ab5e5@mail.gmail.com> Date: Thu, 1 Jun 2006 11:45:57 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <18e02bd30606010145h4e9b8ca8y20d5048d7f7c45e@mail.gmail.com> MIME-Version: 1.0 References: <18e02bd30605311359pf9ac05bu9b6584fced2e0c52@mail.gmail.com> <447E6DD9.2070405@elischer.org> <18e02bd30606010145h4e9b8ca8y20d5048d7f7c45e@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: performance graphs with netgraph X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 08:52:06 -0000 On 6/1/06, Iantcho Vassilev wrote: > > > > On 6/1/06, Julian Elischer wrote: > > > > Iantcho Vassilev wrote: > > > > > Hello everyone, > > > > > > Does anyone knows how to implement(make graphs of the traffic) via the > > > Netgraph framework? > > > > > > This may be silly but you do know that netgraph (in FreeBSD) is not > > a graphing program right? > > :) Is it? > > > Yes i know what netgraph is..What i tought is that someone point me to a > good explanation of usage of netgraph..For example i found a netgraph usage > which make to interfaces showing like one..so if you sniff on this one you > get the traffic from both.. > > Sorry for the forwarding...My mistake From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 08:57:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9A01816A732; Thu, 1 Jun 2006 08:57:43 +0000 (UTC) (envelope-from kyrreny@broadpark.no) Received: from osl1smout1.broadpark.no (osl1smout1.broadpark.no [80.202.4.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2FA443D45; Thu, 1 Jun 2006 08:57:42 +0000 (GMT) (envelope-from kyrreny@broadpark.no) Received: from osl1sminn1.broadpark.no ([80.202.4.59]) by osl1smout1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J06000KFBK5XBD0@osl1smout1.broadpark.no>; Thu, 01 Jun 2006 10:57:41 +0200 (CEST) Received: from urban.broadpark.no ([80.203.212.30]) by osl1sminn1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J0600DG1BK2H860@osl1sminn1.broadpark.no>; Thu, 01 Jun 2006 10:57:41 +0200 (CEST) Date: Thu, 01 Jun 2006 10:57:36 +0200 From: Kyrre Nygard In-reply-to: <447E9540.2020003@io.dk> To: Rico , freebsd-chat@freebsd.org, freebsd-questions@freebsd.org Message-id: <7.0.1.0.2.20060601105720.022aa468@broadpark.no> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Version 7.0.1.0 Content-type: text/plain; charset=us-ascii; format=flowed Content-transfer-encoding: 7BIT References: <447E9540.2020003@io.dk> Cc: Subject: Re: The Unix Haters Handbook X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 08:57:45 -0000 At 09:20 01.06.2006, Rico wrote: >Hi all. > >I had not before seen this book, but doing some Unix research I found it >at http://research.microsoft.com/~daniel/uhh-download.html > >Loving Unix I found the book hilarious and quite entertaining and still >containing some truth. The chapter about the "rm" command is very funny >because everybody has tried that mistake once. > >Anyway, wanted to share my discovery. I know many knows this book, but >perhaps many also don't. > >Best and kind regards, >Rico I surely didn't know about it. Thanks a lot man :) Kyrre From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 09:07:21 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6CBA116AFD5 for ; Thu, 1 Jun 2006 09:07:21 +0000 (UTC) (envelope-from f.bonnet@esiee.fr) Received: from mail.esiee.fr (mail.esiee.fr [147.215.1.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1D65843D55 for ; Thu, 1 Jun 2006 09:07:20 +0000 (GMT) (envelope-from f.bonnet@esiee.fr) Received: from mail.esiee.fr (localhost.esiee.fr [127.0.0.1]) by mail.esiee.fr (Postfix) with SMTP id 9DE7836593C; Thu, 1 Jun 2006 11:07:16 +0200 (CEST) Received: from [147.215.1.21] (lisa.esiee.fr [147.215.1.21]) by mail.esiee.fr (Postfix) with ESMTP id 3588B36590F; Thu, 1 Jun 2006 11:07:15 +0200 (CEST) Message-ID: <447EAE41.9090005@esiee.fr> Date: Thu, 01 Jun 2006 11:07:13 +0200 From: Frank Bonnet User-Agent: Thunderbird 1.5 (X11/20060320) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 09:07:22 -0000 Hello I'm searching for some tools that are able to produce some graphics ( understandables by managers ...) to show the system load ( CPU . DISK I/O , memory ... etc etc ) The purpose is to show how the machine ( mailhub ) is loaded to replace it by a stronger box. TIA -- Frank Bonnet From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 09:26:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4838816A594 for ; Thu, 1 Jun 2006 09:26:03 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id D686D43D48 for ; Thu, 1 Jun 2006 09:26:02 +0000 (GMT) (envelope-from freebsd-questions@m.gmane.org) Received: from list by ciao.gmane.org with local (Exim 4.43) id 1FljQn-0004hu-Hg for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 11:25:29 +0200 Received: from 143.129.77.38 ([143.129.77.38]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Jun 2006 11:25:29 +0200 Received: from bart.braem by 143.129.77.38 with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Jun 2006 11:25:29 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org From: Bart Braem Date: Thu, 01 Jun 2006 11:25:11 +0200 Lines: 8 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7Bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: 143.129.77.38 User-Agent: KNode/0.10.2 Sender: news Subject: Mail when users over quota X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 09:26:03 -0000 We are implementing quota on our servers and it worked out fine. But we would like to warn users with a mail when they are over quota. Is there a tool that does that? We found warnquota for linux but nothing for FreeBSD. We are not the only users of quota who want to warn their users with a mail, right? Regards, Bart From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 09:49:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7EC4916B3A9 for ; Thu, 1 Jun 2006 09:49:48 +0000 (UTC) (envelope-from f.bonnet@esiee.fr) Received: from mail.esiee.fr (mail.esiee.fr [147.215.1.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id C7EC643D5D for ; Thu, 1 Jun 2006 09:49:47 +0000 (GMT) (envelope-from f.bonnet@esiee.fr) Received: from mail.esiee.fr (localhost.esiee.fr [127.0.0.1]) by mail.esiee.fr (Postfix) with SMTP id AF3F63658C2 for ; Thu, 1 Jun 2006 11:49:46 +0200 (CEST) Received: from [147.215.1.21] (lisa.esiee.fr [147.215.1.21]) by mail.esiee.fr (Postfix) with ESMTP id 62E993658B9 for ; Thu, 1 Jun 2006 11:49:45 +0200 (CEST) Message-ID: <447EB839.8070103@esiee.fr> Date: Thu, 01 Jun 2006 11:49:45 +0200 From: Frank Bonnet User-Agent: Thunderbird 1.5 (X11/20060320) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: limiting apache thru login.conf ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 09:49:52 -0000 Hello again I'm in troubles with a webmail using apache ( squirrelmail ) that seems to eat a lot of ressources of the machine then really slowing it down. Does anyone has tried to limit ressources "eaten" by apache using the /etc/login.conf file for the www user ? The apache.sh launching script use the /usr/bin/limits command but there is no special entry for the www user in login.conf file . TIA -- Frank Bonnet From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 10:00:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8A48316B81E for ; Thu, 1 Jun 2006 10:00:59 +0000 (UTC) (envelope-from freebsd-questions@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 175F443D83 for ; Thu, 1 Jun 2006 10:00:59 +0000 (GMT) (envelope-from freebsd-questions@m.gmane.org) Received: from list by ciao.gmane.org with local (Exim 4.43) id 1Fljz0-0001TR-5s for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 12:00:50 +0200 Received: from panix2.panix.com ([166.84.1.2]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Jun 2006 12:00:50 +0200 Received: from mark.evenson by panix2.panix.com with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 01 Jun 2006 12:00:50 +0200 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org From: Mark Evenson Date: Thu, 01 Jun 2006 12:00:38 +0200 Lines: 23 Message-ID: <447EBAC6.20803@gmx.at> References: <20060531133230.7D73943D6B@mx1.FreeBSD.org> <192c377948a2a44244956738249837e4@pacific.net.au> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: panix2.panix.com User-Agent: Thunderbird 1.5.0.2 (X11/20060518) In-Reply-To: <192c377948a2a44244956738249837e4@pacific.net.au> Sender: news Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 10:01:09 -0000 Malcolm Fitzgerald wrote: > > On 31/05/2006, at 11:30 PM, Steve Bertrand wrote: > >> >> Take a look at the 'ServerName' directive in your httpd.conf file. Try >> uncommenting said directive, and put your IP address beside it. > > This line is already in place > > ServerName 127.0.0.1:80 I can confirm this behavior with www/apache22 for a FBD_6_1 machine not in DNS. My solution: I commented out the load of mod_unique_id in httpd.conf making everything work just fine. Looking at the documentation of mod_unique_id convinced me that I would only need it for some sort of server-side application that could not provide itself with a concept of a session. I haven't dug into the mod_unique_id code to find out what it is trying to resolve. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 10:22:33 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1679416A429 for ; Thu, 1 Jun 2006 10:22:33 +0000 (UTC) (envelope-from tequnix@callooh.com) Received: from fw2.creative.co.at (fw2.creative.co.at [193.81.98.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 02B2343D45 for ; Thu, 1 Jun 2006 10:22:31 +0000 (GMT) (envelope-from tequnix@callooh.com) Received: from blaster3.intern.creative.co.at (blaster3.intern.creative.co.at [192.168.10.8]) by fw2.creative.co.at (8.13.4/8.13.4/Debian-3sarge1) with ESMTP id k51AMTtL007510 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 1 Jun 2006 12:22:29 +0200 Received: from jadzia.intern.creative.co.at (jadzia.intern.creative.co.at [192.168.10.23]) by blaster3.intern.creative.co.at (8.13.4/8.13.4/Debian-3sarge1) with ESMTP id k51AMIhB016789 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 1 Jun 2006 12:22:18 +0200 Received: from jadzia.intern.creative.co.at (localhost.intern.creative.co.at [127.0.0.1]) by jadzia.intern.creative.co.at (8.13.6/8.13.6) with ESMTP id k51AMC7u093040; Thu, 1 Jun 2006 12:22:21 +0200 (CEST) (envelope-from tequnix@callooh.com) Date: Thu, 1 Jun 2006 12:22:10 +0200 From: Reinhard Weismann To: Jon Falconer Message-ID: <20060601122210.5f074987@jadzia.intern.creative.co.at> In-Reply-To: References: X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV 0.88.2/1504/Wed May 31 21:59:14 2006 on blaster3.intern.creative.co.at X-Virus-Status: Clean X-Spam-Status: No, score=-4.4 required=5.0 tests=ALL_TRUSTED,BAYES_00 autolearn=ham version=3.1.0 X-Spam-Checker-Version: SpamAssassin 3.1.0 (2005-09-13) on blaster3.intern.creative.co.at Cc: questions@freebsd.org Subject: Re: openldap-2.3 won't start on a 6.1R system X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 10:22:39 -0000 had the same problem, went away after disabling WITH_SHELL, there also seems to be a related entry in /usr/ports/UPDATING: [..] 20060526: AFFECTS: users of net/openldap23-server AUTHOR: delphij@FreeBSD.org The setting of SHELL backend has been inverted to off by default, because of the side effect it can cause. ... ... You are advised to do a "make config" in the net/openldap23-server directory *before* upgrading. [..] lg, ~reinhard Am Mon, 22 May 2006 15:23:53 -0700 (PDT) schrieb Jon Falconer : > Greetings, > > I had a server running FreeBSD 6.0 Release with openldap 2.3.20 running > fine (along with postfix, cyrus-sasl, courier-imap, bdb-4.3, etc.) I > needed to move the system to new hardware, so I rebuild it using 6.1 > Release. The ports tree has been updated so openldap 2.3.23 is current. > After building and installing this port, and copying my config files from > my 6.0 system, openldap server will not start. It silently quits with no > error or log entries when run using /usr/local/etc/rc.d/slapd start. > > However typing: > /usr/local/libexec/slapd -Tt > > yields: > /libexec/ld-elf.so.1: /usr/local/lib/libldap_r-2.3.so.2: Undefined symbol > "pthread_getconcurrency" > > My build options for openldap are: > > %cat /var/db/ports/openldap23/options > # This file is auto-generated by 'make config'. > # No user-servicable parts inside! > # Options for openldap-server-2.3.23 > _OPTIONS_READ=openldap-server-2.3.23 > WITH_SASL=true > WITHOUT_PERL=true > WITH_SHELL=true > WITHOUT_ODBC=true > WITHOUT_SLP=true > WITHOUT_SLAPI=true > WITH_TCP_WRAPPERS=true > WITH_BDB=true > WITHOUT_ACCESSLOG=true > WITHOUT_AUDITLOG=true > WITHOUT_DENYOP=true > WITHOUT_DYNGROUP=true > WITHOUT_DYNLIST=true > WITHOUT_LASTMOD=true > WITHOUT_PPOLICY=true > WITHOUT_PROXYCACHE=true > WITHOUT_REFINT=true > WITHOUT_RETCODE=true > WITHOUT_RWM=true > WITHOUT_SYNCPROV=true > WITHOUT_TRANSLUCENT=true > WITHOUT_UNIQUE=true > WITHOUT_VALSORT=true > WITHOUT_ACI=true > WITH_DYNAMIC_BACKENDS=true > % > > I don't know if this is a problem with the db43 library or something else. > Any pointers are welcome. > > Thanks, > > Jon > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- reinhard weismann creative media gmbh ditscheinergasse 4/3, a-1030 vienna t: +43 1 7150227 74 f: +43 1 7150227 99 http://www.creative.co.at From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 10:41:20 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5A9C916A4AC for ; Thu, 1 Jun 2006 10:41:20 +0000 (UTC) (envelope-from lauasanf@wilderness.homeip.net) Received: from mxsf19.cluster1.charter.net (mxsf19.cluster1.charter.net [209.225.28.219]) by mx1.FreeBSD.org (Postfix) with ESMTP id E7BCF43D4C for ; Thu, 1 Jun 2006 10:41:17 +0000 (GMT) (envelope-from lauasanf@wilderness.homeip.net) Received: from mxip18a.cluster1.charter.net (mxip18a.cluster1.charter.net [209.225.28.148]) by mxsf19.cluster1.charter.net (8.12.11/8.12.11) with ESMTP id k51AfGUt006584 for ; Thu, 1 Jun 2006 06:41:16 -0400 Received: from 24-159-55-136.dhcp.jcsn.tn.charter.com (HELO [192.168.1.6]) ([24.159.55.136]) by mxip18a.cluster1.charter.net with ESMTP; 01 Jun 2006 06:41:16 -0400 X-IronPort-AV: i="4.05,197,1146456000"; d="scan'208"; a="376020080:sNHT17616944" Message-ID: <447EC44B.9090205@wilderness.homeip.net> Date: Thu, 01 Jun 2006 05:41:15 -0500 From: Laurence Sanford User-Agent: Thunderbird 1.5.0.2 (X11/20060506) MIME-Version: 1.0 To: Frank Bonnet References: <447EAE41.9090005@esiee.fr> In-Reply-To: <447EAE41.9090005@esiee.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 10:41:21 -0000 Frank Bonnet wrote: > Hello > > I'm searching for some tools that are able to produce > some graphics ( understandables by managers ...) to > show the system load ( CPU . DISK I/O , memory ... etc etc ) > > The purpose is to show how the machine ( mailhub ) is loaded > to replace it by a stronger box. > > TIA MRTG will do this, you just need to make sure you provide it with the proper information. I run MRTG to monitor many things on many machines, including cpu usage, load averages, memory free/shared/cached/buffered and disk space available as well as traffic (as it was intended for). The easiest way I know how to tell you to set this up is configure your favorite SNMP service on the machine to be monitored, and snmpbulkwalk machine > mibfile then go through mibfile to find the information you need and put it in the MRTG config file. Lots of good help on stuff like this on the MRTG site. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 11:11:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1C02A16B98A for ; Thu, 1 Jun 2006 11:11:36 +0000 (UTC) (envelope-from emin@mccme.ru) Received: from ns.mccme.ru (ns.mccme.ru [62.117.108.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2C6C243D68 for ; Thu, 1 Jun 2006 11:11:27 +0000 (GMT) (envelope-from emin@mccme.ru) Received: from mccme.ru (mccme.ru [62.117.108.7]) by ns.mccme.ru (8.13.3/8.13.3) with ESMTP id k51BM37t064449 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for ; Thu, 1 Jun 2006 15:22:04 +0400 (MSD) (envelope-from emin@mccme.ru) Received: from mccme.ru (localhost.mccme.ru [127.0.0.1]) by mccme.ru (8.13.5/8.13.5) with SMTP id k51BDC97007770 for ; Thu, 1 Jun 2006 15:13:12 +0400 Date: Thu, 1 Jun 2006 15:13:06 +0400 From: "Eugene M. Minkovskii" To: freebsd-questions@freebsd.org Message-ID: <20060601111305.GA6660@mccme.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Content-Transfer-Encoding: 8bit Organization: MCCME Moscow User-Agent: Mutt/1.5.11 X-MCCME-Spam: No, score=0 required=5 tests= Subject: bug in tcpdump? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 11:11:47 -0000 It seems to me that I see a bug in tcpdump(1): option -A working same as -x and don't produce ASCII output. (I use FreeBSD 6.1) -- Sensory yours, Eugene Minkovskii óÅÎÓÏÒÎÏ ×ÁÛ, å×ÇÅÎÉÊ íÉÎØËÏ×ÓËÉÊ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 11:29:40 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2FCA316B62A for ; Thu, 1 Jun 2006 11:29:40 +0000 (UTC) (envelope-from nikolas.britton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id 597FC43D4C for ; Thu, 1 Jun 2006 11:29:38 +0000 (GMT) (envelope-from nikolas.britton@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so254204nzf for ; Thu, 01 Jun 2006 04:29:38 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=io2Gzzjun4r/JDvHaUBux/ubJZc0Ajq53U7HJGPwmXA0TDHMGpl12/76Bv9Dz5GGZCd44Mobtg4nugX2F+wCQGS2QdNPt4UFdbLJrC9hrtkt+pPmHIqRKeZddnefCbEmVaFN5n5qLw3LUPmA2UYx2YUpi0BhZiAFtAtqhKKyxzU= Received: by 10.36.24.4 with SMTP id 4mr81215nzx; Thu, 01 Jun 2006 04:29:02 -0700 (PDT) Received: by 10.36.104.17 with HTTP; Thu, 1 Jun 2006 04:29:37 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 06:29:37 -0500 From: "Nikolas Britton" To: Dave , "FreeBSD Mailing List" In-Reply-To: <004801c6851e$153d9bb0$0200a8c0@satellite> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <004801c6851e$153d9bb0$0200a8c0@satellite> Cc: Subject: Re: Replacing Sendmail with Postfix? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 11:29:51 -0000 On 5/31/06, Dave wrote: > Hello, > Do you have a link on that article? > I use postfix on every unix system i own or manage, removing sendmail is > one of the first things i do. [deleted] Thanks dave, the article is here: http://bsd.slashdot.org/article.pl?sid=06/05/31/126238 And the link to the FreeBSD handbook article is here: http://www.freebsd.org/handbook/mail-changingmta.html > > ----- Original Message ----- > From: "Nikolas Britton" > To: "FreeBSD Mailing List" > Sent: Wednesday, May 31, 2006 9:58 PM > Subject: Replacing Sendmail with Postfix? > > > > Hey did anyone see the article on /. about Sendmail being removed from > > NetBSD, and being replaced with Postfix? > > > > What advice can you offer about doing this on FreeBSD? What's > > involved, How do you do it, are there any gotta's (cron scripts?), > > etc?.... Is it just as simple as installing the Postfix port? How do > > you stop buildworld from reinstalling sendmail? /etc/mail/mailer.conf? > > > > Oh hmm, I see there's a section in the FreeBSD handbook that deals > > with this topic... Oh well I've already wrote this much... maybe you > > guy and gals have something more to add. > > > > Thanks! > > -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 11:51:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 46CF416AA66 for ; Thu, 1 Jun 2006 11:51:39 +0000 (UTC) (envelope-from vdemart1@tin.it) Received: from vsmtp1.tin.it (vsmtp1.tin.it [212.216.176.141]) by mx1.FreeBSD.org (Postfix) with ESMTP id E84C343D46 for ; Thu, 1 Jun 2006 11:51:38 +0000 (GMT) (envelope-from vdemart1@tin.it) Received: from pswm17.cp.tin.it (192.168.70.65) by vsmtp1.tin.it (7.2.072.1) id 447D8F030010BDCF for freebsd-questions@freebsd.org; Thu, 1 Jun 2006 13:53:11 +0200 Message-ID: <10b8f6f083d.vdemart1@tin.it> Date: Thu, 1 Jun 2006 12:51:26 +0100 (GMT+01:00) From: Vittorio To: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain;charset="UTF-8" Content-Transfer-Encoding: 7bit X-Originating-IP: 194.185.25.72 Subject: R, unixodbc & easysoft problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Vittorio List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 11:51:40 -0000 I installed first, from the ports, unixodbc, then the latest oracle easysoft driver on my FBSD 6.1 box, following the included instructions. When using unixodbc with postgresql, plain sailing, it works like a charm! But when I try to connect via odbc to oracle (here an instance of the statistical software R) I get: 1: [RODBC] ERROR: state 01000, code 0, message [unixODBC][Driver Manager]Can't open lib '/usr/compat/linux/usr/local/easysoft/oracle/libesoracle.so' : Shared object "libm.so.6" not found, required by "libesoracle.so" and issuing: /compat/linux/usr/bin/ldd -v libesoracle.so /compat/linux/usr/bin/ldd: /lib/ld-linux.so.2: not found ldd: /lib/ld- linux.so.2 $exited with unknown exit code (127) I understand that there's something to be set as far as libraries to be used & linked are concerned. Is there anyone out there able to point me at documents where the exact setting up of the easysoft oracle driver ** ON FBSD ** is explained OR able to explain how to set it up on the same OS? Thanks a lot - Vittorio From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 12:05:31 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A132116BB28 for ; Thu, 1 Jun 2006 12:05:31 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4050C43D70 for ; Thu, 1 Jun 2006 12:04:45 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 16942 invoked from network); 1 Jun 2006 12:04:27 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 12:04:27 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id CFAFE28449; Thu, 1 Jun 2006 08:04:25 -0400 (EDT) To: freebsd-questions@freebsd.org, freebsd-openoffice@freebsd.org References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> From: Lowell Gilbert Date: Thu, 01 Jun 2006 08:04:25 -0400 In-Reply-To: <447E9764.1030107@netfence.it> (Andrea Venturoli's message of "Thu, 01 Jun 2006 09:29:40 +0200") Message-ID: <44d5dtqdyu.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 12:05:53 -0000 Andrea Venturoli writes: > I reported it several months ago and all I got to be told was that > it's a strange problem. Well, that's true... Do you have devel/epm installed by any chance? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 12:09:44 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9648216BB49 for ; Thu, 1 Jun 2006 12:09:44 +0000 (UTC) (envelope-from rebehn@ant.uni-bremen.de) Received: from antsrv1.ant.uni-bremen.de (antsrv1.ant.uni-bremen.de [134.102.176.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 801FD43E6C for ; Thu, 1 Jun 2006 12:07:45 +0000 (GMT) (envelope-from rebehn@ant.uni-bremen.de) Received: from bremerhaven.ant.uni-bremen.de ([134.102.176.10]) by antsrv1.ant.uni-bremen.de with esmtp (Exim 4.62 (FreeBSD)) (envelope-from ) id 1Fllxo-00004m-NF; Thu, 01 Jun 2006 14:07:44 +0200 Message-ID: <447ED890.1030104@ant.uni-bremen.de> Date: Thu, 01 Jun 2006 14:07:44 +0200 From: Heinrich Rebehn User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.2) Gecko/20060405 SeaMonkey/1.0.1 MIME-Version: 1.0 To: questions@FreeBSD.org References: <20060531182308.41992.qmail@web33305.mail.mud.yahoo.com> In-Reply-To: <20060531182308.41992.qmail@web33305.mail.mud.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 12:10:14 -0000 Danial Thom wrote: > The intel cards that use the EM driver are the > best performing cards in FreeBSD that we've > tested. We've test cards made by the same company > that use the broadcom controllers and the intel > cards are substantially better (ie use less CPU > passing the same amount of traffic). > > Be careful using on-board controllers. Usually > vendors, for some reason, don't wire them to the > pci-x bus. Most supermicro boards wire the em > controllers to the 32bit/33mhz bus and the tyan > and supermicro opteron boards we've tested wire > the broadcoms to a shared 1x PCI-E, both of which > will not only give you poor performance, but are > not capable of running full gigabit rates. > > DT > The Intel card would be an INTEL Pro1000MF, right? This would be quite expensive (~ EUR 430), but good performance and stability would warrant that. ATM, we are using the onboard controller (Broadcom BCM5704C wired to the pci-x bus). I did not have opportunity to do performance measurements, but we do have problems with our Linkpro 1000SX/1000TX converters, the 3rd of which has already died. That's why i want to give a PCI-X card with fiber interface a try. The 3com 996-SX is somewhat cheaper, does anyone have experience with that one? Thanks for all your replies :-) Heinrich From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 12:36:48 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5C7C016BC88 for ; Thu, 1 Jun 2006 12:36:48 +0000 (UTC) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id AF72743D45 for ; Thu, 1 Jun 2006 12:36:47 +0000 (GMT) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by horn.net.ru (8.13.6/8.13.1) with ESMTP id k51CagKD041405 for ; Thu, 1 Jun 2006 16:36:43 +0400 (MSD) (envelope-from horn@horn.net.ru) From: "horn" To: freebsd-questions@FreeBSD.org Date: Thu, 1 Jun 2006 16:36:42 +0400 Message-Id: <20060601122931.M70877@horn.net.ru> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 82.146.42.86 (horn) MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r X-Mailman-Approved-At: Thu, 01 Jun 2006 12:59:56 +0000 Cc: Subject: modems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 12:36:52 -0000 Does FreeBSD support the modem-devices: - D-Link DFM-562IS 56K - CNet CN5614RV V.92 56K ? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:13:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 76CE916A4ED for ; Thu, 1 Jun 2006 13:13:50 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail5.sea5.speakeasy.net (mail5.sea5.speakeasy.net [69.17.117.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 208DA43D46 for ; Thu, 1 Jun 2006 13:13:49 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 18361 invoked from network); 1 Jun 2006 13:13:49 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail5.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 13:13:49 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 0525B28449; Thu, 1 Jun 2006 09:13:47 -0400 (EDT) To: nocturnal References: <447DF7B5.6090507@swehack.se> From: Lowell Gilbert Date: Thu, 01 Jun 2006 09:13:47 -0400 In-Reply-To: <447DF7B5.6090507@swehack.se> (nocturnal@swehack.se's message of "Wed, 31 May 2006 22:08:21 +0200") Message-ID: <44ejy9rpbo.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:13:58 -0000 nocturnal writes: > Not sure if this is already posted or already reported as a bug > because i honestly don't have time for those things. > > I have reproduced this problem a few times but it has some special > requirements. For example i download a torrent from a very fast peer > in the rtorrent client. I have reproduced this with both rTorrent > 0.4.5 - > libTorrent 0.8.5 and two earlier versions which i don't remember. My > friend is using the same versions as i am now and reported no problems > in the latest development versions, he only started using them > today. I have a 10/10Mbit connection at home and this happens when > rtorrent is downloading at max speed. It varies somewhere around > 7-10Mbit but never over 10Mbit by much. My friend only has a capacity > of 1Mbit but got the same problem. > > This is why i'm reporting this because if it turns out that this can > be reproduced by sending speciall crafted packets or packets in a > special order then i guess it's pretty serious. I highly doubt this > but still, a user process should not kill the net like rtorrent has > done. > > Both me and my friend were running FreeBSD 6.0 RELEASE when this happened. > > I was not going to report this but a friend just told me he gets the > exact same results on FreeBSD 6.0 so i felt i should tell someone. Do you have good NICs? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:18:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DBD1A16A49C for ; Thu, 1 Jun 2006 13:18:57 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail7.sea5.speakeasy.net (mail7.sea5.speakeasy.net [69.17.117.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8782143D46 for ; Thu, 1 Jun 2006 13:18:57 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 660 invoked from network); 1 Jun 2006 13:18:57 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail7.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 13:18:57 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 9497428449; Thu, 1 Jun 2006 09:18:56 -0400 (EDT) To: Vittorio References: <10b8f6f083d.vdemart1@tin.it> From: Lowell Gilbert Date: Thu, 01 Jun 2006 09:18:56 -0400 In-Reply-To: <10b8f6f083d.vdemart1@tin.it> (Vittorio's message of "Thu, 1 Jun 2006 12:51:26 +0100 (GMT+01:00)") Message-ID: <44ac8xrp33.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: R, unixodbc & easysoft problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:18:58 -0000 Vittorio writes: > I installed first, from the ports, unixodbc, then the latest oracle > easysoft driver on my FBSD 6.1 box, following the included > instructions. When using unixodbc with postgresql, plain sailing, it > works like a charm! > But when I try to connect via odbc to oracle (here > an instance of the statistical software R) I get: > > 1: [RODBC] ERROR: > state 01000, code 0, message [unixODBC][Driver Manager]Can't open lib > '/usr/compat/linux/usr/local/easysoft/oracle/libesoracle.so' : Shared > object "libm.so.6" not found, required by "libesoracle.so" > > and > issuing: > /compat/linux/usr/bin/ldd -v libesoracle.so > /compat/linux/usr/bin/ldd: /lib/ld-linux.so.2: not found > ldd: /lib/ld- > linux.so.2 $exited with unknown exit code (127) > > I understand that > there's something to be set as far as libraries to be used & linked are > concerned. Do you have the "missing" library? On my system, it was installed by the linux_base port, and is /usr/compat/linux/lib/libm.so.6 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:19:30 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 29C9016A424 for ; Thu, 1 Jun 2006 13:19:30 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id B017B43D46 for ; Thu, 1 Jun 2006 13:19:27 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 8637 invoked from network); 1 Jun 2006 23:19:26 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 1 Jun 2006 23:19:26 +1000 Date: Thu, 1 Jun 2006 23:19:22 +1000 From: Norberto Meijome To: Frank Bonnet Message-ID: <20060601231922.092460ea@localhost> In-Reply-To: <447EAE41.9090005@esiee.fr> References: <447EAE41.9090005@esiee.fr> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:19:30 -0000 On Thu, 01 Jun 2006 11:07:13 +0200 Frank Bonnet wrote: > Hello > > I'm searching for some tools that are able to produce > some graphics ( understandables by managers ...) to > show the system load ( CPU . DISK I/O , memory ... etc etc ) > > The purpose is to show how the machine ( mailhub ) is loaded > to replace it by a stronger box. > > TIA http://www.cacti.net/ Port: cacti-0.8.6h_42 Path: /usr/ports/net/cacti Info: Web-driven graphing interface for RRDTool Maint: sem@FreeBSD.org B-deps: mysql-client-4.1.19 R-deps: expat-2.0.0_1 freetype2-2.1.10_3 libart_lgpl-2.3.17_1 mysql-client-4.1.19 net-snmp-5.2.2_2 perl-5.8.8 php4-4.4.2_2 php4-mysql-4.4.2_2 php4-pcre-4.4.2_2 php4-session-4.4.2_2 php4-xml-4.4.2_2 pkg-config-0.20_2 png-1.2.8_3 rrdtool-1.2.12_1 WWW: http://www.cacti.net From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:29:17 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 60FD616A449 for ; Thu, 1 Jun 2006 13:29:17 +0000 (UTC) (envelope-from nospam@mgedv.net) Received: from mail.mgedv.net (mail.mgedv.net [81.223.168.230]) by mx1.FreeBSD.org (Postfix) with ESMTP id C1D9F43D46 for ; Thu, 1 Jun 2006 13:29:16 +0000 (GMT) (envelope-from nospam@mgedv.net) Received: from metis (sslint.my.loop [1.1.1.1]) by mail.my.loop (mgedv) with ESMTP id A85004574D; Thu, 1 Jun 2006 15:28:54 +0200 (CEST) From: "no@spam@mgedv.net" To: Date: Thu, 1 Jun 2006 15:29:16 +0200 Message-ID: <001801c6857f$61c3f1d0$01010101@avalon.lan> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 In-Reply-To: <447ED890.1030104@ant.uni-bremen.de> Thread-Index: AcaFdKSMKB5RkolSRmKTDZRQ1PMfVQACnqsg Cc: 'Heinrich Rebehn' Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:29:17 -0000 > ATM, we are using the onboard controller (Broadcom BCM5704C > wired to the just a hint: be really careful of what kind of broadcom-chip you'll get - some are could be not/bad supported by bge(4)/bce(4). (check the archives/PRs on that). From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:32:54 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2BE5E16B152 for ; Thu, 1 Jun 2006 13:32:54 +0000 (UTC) (envelope-from nocturnal@swehack.se) Received: from mail2.swebase.com (mail2.swebase.com [82.99.44.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id A8F7C43D45 for ; Thu, 1 Jun 2006 13:32:50 +0000 (GMT) (envelope-from nocturnal@swehack.se) Received: from [82.99.47.5] by mail2.swebase.com (MDaemon.PRO.v8.1.0.R) with ESMTP id 33-md50000034170.msg for ; Thu, 01 Jun 2006 15:31:02 +0200 Message-ID: <447EEBE5.80905@swehack.se> Date: Thu, 01 Jun 2006 15:30:13 +0200 From: nocturnal User-Agent: Thunderbird 1.5 (X11/20060116) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <447DF7B5.6090507@swehack.se> <44ejy9rpbo.fsf@be-well.ilk.org> In-Reply-To: <44ejy9rpbo.fsf@be-well.ilk.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Authenticated-Sender: nocturnal@swehack.se X-MDRemoteIP: 82.99.47.5 X-Return-Path: nocturnal@swehack.se X-MDaemon-Deliver-To: freebsd-questions@freebsd.org X-Spam-Checker-Version: SpamAssassin 3.0.4 (2005-06-05) on mail2 X-Spam-Status: No, score=0.9 required=5.0 tests=PLING_QUERY autolearn=disabled version=3.0.4 X-Spam-Level: X-Spam-Processed: mail2.swebase.com, Thu, 01 Jun 2006 15:31:05 +0200 Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:32:57 -0000 Hi One thing i should have mentioned is that this only happens with rtorrent. For example i can transfer in 10Mbit+(not much plus) from work, where i have no bandwidth restriction, for hours without problems. Using scp, i have not tried with ftp and very large files. When i transfer large files from work with scp i can maintain a speed of 10Mbit+ for long periods of times without problems. This problem has only happened because of rtorrent using a lot of bandwidth. And as i said earlier it happens when using less bandwidth to. Med vänliga hälsningar Stefan Midjich aka nocturnal [Swehack] http://swehack.se Lowell Gilbert wrote: > nocturnal writes: > >> Not sure if this is already posted or already reported as a bug >> because i honestly don't have time for those things. >> >> I have reproduced this problem a few times but it has some special >> requirements. For example i download a torrent from a very fast peer >> in the rtorrent client. I have reproduced this with both rTorrent >> 0.4.5 - >> libTorrent 0.8.5 and two earlier versions which i don't remember. My >> friend is using the same versions as i am now and reported no problems >> in the latest development versions, he only started using them >> today. I have a 10/10Mbit connection at home and this happens when >> rtorrent is downloading at max speed. It varies somewhere around >> 7-10Mbit but never over 10Mbit by much. My friend only has a capacity >> of 1Mbit but got the same problem. >> >> This is why i'm reporting this because if it turns out that this can >> be reproduced by sending speciall crafted packets or packets in a >> special order then i guess it's pretty serious. I highly doubt this >> but still, a user process should not kill the net like rtorrent has >> done. >> >> Both me and my friend were running FreeBSD 6.0 RELEASE when this happened. >> >> I was not going to report this but a friend just told me he gets the >> exact same results on FreeBSD 6.0 so i felt i should tell someone. > > Do you have good NICs? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:38:24 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 185F016B56F for ; Thu, 1 Jun 2006 13:38:24 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33311.mail.mud.yahoo.com (web33311.mail.mud.yahoo.com [68.142.206.126]) by mx1.FreeBSD.org (Postfix) with SMTP id AA1CD43D46 for ; Thu, 1 Jun 2006 13:38:23 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 1745 invoked by uid 60001); 1 Jun 2006 13:38:23 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=rFc5fGI5scoUszdtEGnxl/nXd8j9wgwp33V6KQ5HxaI0Mkez5lKoQV8O2D2X1ur7SvIOhIxziNUmuQaKzRLOZai9n/a3z7A5NoRrdVJ/DZGSp0mo3GjANZ+5rV5uPxIUvxmO6zcTVrJqsx6F76rzCI7x8n/KMgSRW1fHnkYDBTs= ; Message-ID: <20060601133823.1743.qmail@web33311.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33311.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 06:38:23 PDT Date: Thu, 1 Jun 2006 06:38:23 -0700 (PDT) From: Danial Thom To: Heinrich Rebehn , questions@FreeBSD.org In-Reply-To: <447ED890.1030104@ant.uni-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:38:25 -0000 --- Heinrich Rebehn wrote: > Danial Thom wrote: > > The intel cards that use the EM driver are > the > > best performing cards in FreeBSD that we've > > tested. We've test cards made by the same > company > > that use the broadcom controllers and the > intel > > cards are substantially better (ie use less > CPU > > passing the same amount of traffic). > > > > Be careful using on-board controllers. > Usually > > vendors, for some reason, don't wire them to > the > > pci-x bus. Most supermicro boards wire the em > > controllers to the 32bit/33mhz bus and the > tyan > > and supermicro opteron boards we've tested > wire > > the broadcoms to a shared 1x PCI-E, both of > which > > will not only give you poor performance, but > are > > not capable of running full gigabit rates. > > > > DT > > > > The Intel card would be an INTEL Pro1000MF, > right? This would be quite > expensive (~ EUR 430), but good performance and > stability would warrant > that. > ATM, we are using the onboard controller > (Broadcom BCM5704C wired to the > pci-x bus). I did not have opportunity to do > performance measurements, > but we do have problems with our Linkpro > 1000SX/1000TX converters, the > 3rd of which has already died. > That's why i want to give a PCI-X card with > fiber interface a try. No, that would be the 1000MT, the MF is a fiber card I believe. They are about US$120. in the US. How do you know its wired to the PCI-X bus, since I don't believe that the controller has a way of reporting the way that the intel controller does? What MB do you have? Also keep in mind that the bge driver is a piece of crap; driver quality is a much more telling factor in these free OS's than the card in many cases. The EM and FXP are the only drivers worth anything (mainly because neither were written by mass-driver mill man Bill Paul). DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 13:41:28 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6C71A16B914 for ; Thu, 1 Jun 2006 13:41:28 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33302.mail.mud.yahoo.com (web33302.mail.mud.yahoo.com [68.142.206.117]) by mx1.FreeBSD.org (Postfix) with SMTP id 2355543D5F for ; Thu, 1 Jun 2006 13:41:24 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 85133 invoked by uid 60001); 1 Jun 2006 13:41:24 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=A5faQAZPjyKvwEDSOOs6pBl4MIr3QL/w4nhzCU3hfLeLYO8fEHDJDA9NrjlEnAi0ArQR3uzlW1i0Zcwryk13MK/PuWdJ5xHf1Xgs6cnv+LdRJbDug/4MiAdBJLfBZ7b5uOcAEzE/Jox4CnIGYFdN2SdMK/xT2mwzFIqODNZgr/Q= ; Message-ID: <20060601134124.85131.qmail@web33302.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33302.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 06:41:24 PDT Date: Thu, 1 Jun 2006 06:41:24 -0700 (PDT) From: Danial Thom To: Heinrich Rebehn , questions@FreeBSD.org In-Reply-To: <447ED890.1030104@ant.uni-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 13:41:28 -0000 --- Heinrich Rebehn wrote: > Danial Thom wrote: > > The intel cards that use the EM driver are > the > > best performing cards in FreeBSD that we've > > tested. We've test cards made by the same > company > > that use the broadcom controllers and the > intel > > cards are substantially better (ie use less > CPU > > passing the same amount of traffic). > > > > Be careful using on-board controllers. > Usually > > vendors, for some reason, don't wire them to > the > > pci-x bus. Most supermicro boards wire the em > > controllers to the 32bit/33mhz bus and the > tyan > > and supermicro opteron boards we've tested > wire > > the broadcoms to a shared 1x PCI-E, both of > which > > will not only give you poor performance, but > are > > not capable of running full gigabit rates. > > > > DT > > > To clarify, I'd recommend trying an intel PCI-X copper card with the convertor. The bge driver is garbage and is likely at least part of your problem with the convertor. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:02:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 62A0316AB1B for ; Thu, 1 Jun 2006 14:02:55 +0000 (UTC) (envelope-from nvass@teledomenet.gr) Received: from matrix.teledomenet.gr (dns1.teledomenet.gr [213.142.128.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1934543D5A for ; Thu, 1 Jun 2006 14:02:51 +0000 (GMT) (envelope-from nvass@teledomenet.gr) Received: from iris ([192.168.1.71]) by matrix.teledomenet.gr (8.12.10/8.12.10) with ESMTP id k51E2nEY007873; Thu, 1 Jun 2006 17:02:49 +0300 From: Nikos Vassiliadis To: freebsd-questions@freebsd.org Date: Thu, 1 Jun 2006 16:58:13 +0300 User-Agent: KMail/1.9.1 References: <447DF7B5.6090507@swehack.se> <44ejy9rpbo.fsf@be-well.ilk.org> <447EEBE5.80905@swehack.se> In-Reply-To: <447EEBE5.80905@swehack.se> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Content-Disposition: inline Message-Id: <200606011658.14160.nvass@teledomenet.gr> Cc: nocturnal Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:03:02 -0000 On Thursday 01 June 2006 16:30, nocturnal wrote: > Hi > > One thing i should have mentioned is that this only happens with > rtorrent. For example i can transfer in 10Mbit+(not much plus) from > work, where i have no bandwidth restriction, for hours without problems. > Using scp, i have not tried with ftp and very large files. When i > transfer large files from work with scp i can maintain a speed of > 10Mbit+ for long periods of times without problems. This problem has > only happened because of rtorrent using a lot of bandwidth. And as i > said earlier it happens when using less bandwidth to. Is you computer behing a dsl modem/router which does NAT? Sometimes modem/routers cannot handle the number of connections torrents do and die. And most of the time you cannot have a clue, everything will look normal, but it won't do NAT. Also, what do mean when you say "net dies"? Do you mean internet dies or your LAN dies? > > > > Med vänliga hälsningar > > Stefan Midjich aka nocturnal > [Swehack] http://swehack.se > > Lowell Gilbert wrote: > > nocturnal writes: > >> Not sure if this is already posted or already reported as a bug > >> because i honestly don't have time for those things. > >> > >> I have reproduced this problem a few times but it has some special > >> requirements. For example i download a torrent from a very fast peer > >> in the rtorrent client. I have reproduced this with both rTorrent > >> 0.4.5 - > >> libTorrent 0.8.5 and two earlier versions which i don't remember. My > >> friend is using the same versions as i am now and reported no problems > >> in the latest development versions, he only started using them > >> today. I have a 10/10Mbit connection at home and this happens when > >> rtorrent is downloading at max speed. It varies somewhere around > >> 7-10Mbit but never over 10Mbit by much. My friend only has a capacity > >> of 1Mbit but got the same problem. > >> > >> This is why i'm reporting this because if it turns out that this can > >> be reproduced by sending speciall crafted packets or packets in a > >> special order then i guess it's pretty serious. I highly doubt this > >> but still, a user process should not kill the net like rtorrent has > >> done. > >> > >> Both me and my friend were running FreeBSD 6.0 RELEASE when this > >> happened. > >> > >> I was not going to report this but a friend just told me he gets the > >> exact same results on FreeBSD 6.0 so i felt i should tell someone. > > > > Do you have good NICs? > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:15:51 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9352D16A81B for ; Thu, 1 Jun 2006 14:15:51 +0000 (UTC) (envelope-from rebehn@ant.uni-bremen.de) Received: from antsrv1.ant.uni-bremen.de (antsrv1.ant.uni-bremen.de [134.102.176.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2A8A643D48 for ; Thu, 1 Jun 2006 14:15:50 +0000 (GMT) (envelope-from rebehn@ant.uni-bremen.de) Received: from bremerhaven.ant.uni-bremen.de ([134.102.176.10]) by antsrv1.ant.uni-bremen.de with esmtp (Exim 4.62 (FreeBSD)) (envelope-from ) id 1Flnxl-0000Yr-PR; Thu, 01 Jun 2006 16:15:49 +0200 Message-ID: <447EF695.6090506@ant.uni-bremen.de> Date: Thu, 01 Jun 2006 16:15:49 +0200 From: Heinrich Rebehn User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.8.0.2) Gecko/20060405 SeaMonkey/1.0.1 MIME-Version: 1.0 To: danial_thom@yahoo.com References: <20060601133823.1743.qmail@web33311.mail.mud.yahoo.com> In-Reply-To: <20060601133823.1743.qmail@web33311.mail.mud.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:15:52 -0000 Danial Thom wrote: > > --- Heinrich Rebehn > wrote: > >> Danial Thom wrote: >>> The intel cards that use the EM driver are >> the >>> best performing cards in FreeBSD that we've >>> tested. We've test cards made by the same >> company >>> that use the broadcom controllers and the >> intel >>> cards are substantially better (ie use less >> CPU >>> passing the same amount of traffic). >>> >>> Be careful using on-board controllers. >> Usually >>> vendors, for some reason, don't wire them to >> the >>> pci-x bus. Most supermicro boards wire the em >>> controllers to the 32bit/33mhz bus and the >> tyan >>> and supermicro opteron boards we've tested >> wire >>> the broadcoms to a shared 1x PCI-E, both of >> which >>> will not only give you poor performance, but >> are >>> not capable of running full gigabit rates. >>> >>> DT >>> >> The Intel card would be an INTEL Pro1000MF, >> right? This would be quite >> expensive (~ EUR 430), but good performance and >> stability would warrant >> that. >> ATM, we are using the onboard controller >> (Broadcom BCM5704C wired to the >> pci-x bus). I did not have opportunity to do >> performance measurements, >> but we do have problems with our Linkpro >> 1000SX/1000TX converters, the >> 3rd of which has already died. >> That's why i want to give a PCI-X card with >> fiber interface a try. > > No, that would be the 1000MT, the MF is a fiber > card I believe. They are about US$120. in the US. Our building has fiber cabling, that's why i am looking for a fiber card. The 1000SX/1000TX converters that we use are just to unreliable. > > How do you know its wired to the PCI-X bus, since > I don't believe that the controller has a way of > reporting the way that the intel controller does? > What MB do you have? It is a Tyan Thunder K8SD Pro S2882-D http://www.tyan.com/products/html/thunderk8sdpro_spec.html The spec says that the BCM5704C is connected to PCI-X Bridge A (64Bit,100MHz). > > Also keep in mind that the bge driver is a piece > of crap; driver quality is a much more telling > factor in these free OS's than the card in many > cases. The EM and FXP are the only drivers worth > anything (mainly because neither were written by > mass-driver mill man Bill Paul). That really sounds bad. I wonder if others can confirm that. --Heinrich From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:20:28 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C424F16A4C7 for ; Thu, 1 Jun 2006 14:20:28 +0000 (UTC) (envelope-from cswiger@mac.com) Received: from smtpout.mac.com (smtpout.mac.com [17.250.248.174]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1D21B43D46 for ; Thu, 1 Jun 2006 14:20:27 +0000 (GMT) (envelope-from cswiger@mac.com) Received: from mac.com (smtpin04-en2 [10.13.10.149]) by smtpout.mac.com (Xserve/8.12.11/smtpout04/MantshX 4.0) with ESMTP id k51EKQbD000952; Thu, 1 Jun 2006 07:20:26 -0700 (PDT) Received: from [192.168.1.251] (pool-68-160-242-211.ny325.east.verizon.net [68.160.242.211]) (authenticated bits=0) by mac.com (Xserve/smtpin04/MantshX 4.0) with ESMTP id k51EKK8Z028376 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 1 Jun 2006 07:20:25 -0700 (PDT) Message-ID: <447EF7A3.7040704@mac.com> Date: Thu, 01 Jun 2006 10:20:19 -0400 From: Chuck Swiger User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: danial_thom@yahoo.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:20:28 -0000 Danial Thom wrote: > Also keep in mind that the bge driver is a piece > of crap; driver quality is a much more telling > factor in these free OS's than the card in many > cases. The EM and FXP are the only drivers worth > anything (mainly because neither were written by > mass-driver mill man Bill Paul). No doubt you've written a truly remarkable replacement driver which your email is too small to contain. Unlike Fermat, however, you've presumably hidden the proof under the bridge where only trolls may go. I'm tempted to set a Followup-to: header to -chat or maybe /dev/null... -- -Chuck From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:21:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B241616AB21 for ; Thu, 1 Jun 2006 14:21:47 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id A5A2943D6D for ; Thu, 1 Jun 2006 14:21:40 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Flo3N-0007AE-S5; Thu, 01 Jun 2006 10:21:38 -0400 Message-ID: <447EF7EE.1080204@webanoide.org> Date: Fri, 02 Jun 2006 00:21:34 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: horn References: <20060601122931.M70877@horn.net.ru> In-Reply-To: <20060601122931.M70877@horn.net.ru> X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=KOI8-R Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: modems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:21:47 -0000 horn wrote: > Does FreeBSD support the modem-devices: > - D-Link DFM-562IS 56K > - CNet CN5614RV V.92 56K ? I don't think so. Those are winmodems with conexant chipset. As far as I'm concerned those are a no go. http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/compatibility-networking.html#SUPPORT-WINMODEM Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:25:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43AC916A95E for ; Thu, 1 Jun 2006 14:25:56 +0000 (UTC) (envelope-from subhro.kar@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7360543D53 for ; Thu, 1 Jun 2006 14:25:55 +0000 (GMT) (envelope-from subhro.kar@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so468857nzo for ; Thu, 01 Jun 2006 07:25:54 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=DReUqokxgOveqONQrJ+AG/ozfHEHKNL2dC0O6G0lRGzd50geQsifTcXWD7LaOyI0ChwIzvnKj0NmGileiIYV/scYiu/dqUqNdcpJ+0IyyPimVaHYZ8mrEmWUABTPYsooH6NUB1Iw7afmW7si4D/vQLkiKPsWY8zxH7W/3iuEZDw= Received: by 10.65.191.20 with SMTP id t20mr400025qbp; Thu, 01 Jun 2006 07:25:54 -0700 (PDT) Received: by 10.65.250.20 with HTTP; Thu, 1 Jun 2006 07:25:54 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 19:55:54 +0530 From: Subhro To: "Lowell Gilbert" In-Reply-To: <44d5dtqdyu.fsf@be-well.ilk.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> Cc: freebsd-openoffice@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:25:56 -0000 On 6/1/06, Lowell Gilbert wrote: > Andrea Venturoli writes: > > > I reported it several months ago and all I got to be told was that > > it's a strange problem. > > Well, that's true... > > Do you have devel/epm installed by any chance? No I do not have epm installed. Should I install it and try again? Subhro -- Subhro Kar Security Engineer iViZ Techno Solutions Pvt. Ltd. Dhanshree Bldg, 1st Floor Plot XI-16, Sector V Salt Lake City 700091 India From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:26:08 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D920416AD87 for ; Thu, 1 Jun 2006 14:26:08 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33309.mail.mud.yahoo.com (web33309.mail.mud.yahoo.com [68.142.206.124]) by mx1.FreeBSD.org (Postfix) with SMTP id 7981E43D45 for ; Thu, 1 Jun 2006 14:26:08 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 66805 invoked by uid 60001); 1 Jun 2006 14:26:07 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=j+c7Vbpb36Xko2qzLhcq0pF/P7I7wAkVZeOgh7W70op1vPJveN32FMnWUKhbkFZto5cu0dQgIZ8FwI+d7cMiv+chN1ukZaGchpk0K5tRBFwb3NTRpqOU7/FLcBE8E2V/lHUaxjkw8PrSZTUySBfx6RHDhzCHAu3/8Ri9XmOwddc= ; Message-ID: <20060601142607.66803.qmail@web33309.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33309.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 07:26:07 PDT Date: Thu, 1 Jun 2006 07:26:07 -0700 (PDT) From: Danial Thom To: Heinrich Rebehn In-Reply-To: <447EF695.6090506@ant.uni-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:26:09 -0000 --- Heinrich Rebehn wrote: > Danial Thom wrote: > > > > --- Heinrich Rebehn > > > wrote: > > > >> Danial Thom wrote: > >>> The intel cards that use the EM driver are > >> the > >>> best performing cards in FreeBSD that we've > >>> tested. We've test cards made by the same > >> company > >>> that use the broadcom controllers and the > >> intel > >>> cards are substantially better (ie use less > >> CPU > >>> passing the same amount of traffic). > >>> > >>> Be careful using on-board controllers. > >> Usually > >>> vendors, for some reason, don't wire them > to > >> the > >>> pci-x bus. Most supermicro boards wire the > em > >>> controllers to the 32bit/33mhz bus and the > >> tyan > >>> and supermicro opteron boards we've tested > >> wire > >>> the broadcoms to a shared 1x PCI-E, both of > >> which > >>> will not only give you poor performance, > but > >> are > >>> not capable of running full gigabit rates. > >>> > >>> DT > >>> > >> The Intel card would be an INTEL Pro1000MF, > >> right? This would be quite > >> expensive (~ EUR 430), but good performance > and > >> stability would warrant > >> that. > >> ATM, we are using the onboard controller > >> (Broadcom BCM5704C wired to the > >> pci-x bus). I did not have opportunity to do > >> performance measurements, > >> but we do have problems with our Linkpro > >> 1000SX/1000TX converters, the > >> 3rd of which has already died. > >> That's why i want to give a PCI-X card with > >> fiber interface a try. > > > > No, that would be the 1000MT, the MF is a > fiber > > card I believe. They are about US$120. in the > US. > > Our building has fiber cabling, that's why i am > looking for a fiber > card. The 1000SX/1000TX converters that we use > are just to unreliable. > > > > How do you know its wired to the PCI-X bus, > since > > I don't believe that the controller has a way > of > > reporting the way that the intel controller > does? > > What MB do you have? > > It is a Tyan Thunder K8SD Pro S2882-D > > http://www.tyan.com/products/html/thunderk8sdpro_spec.html > > The spec says that the BCM5704C is connected to > PCI-X Bridge A > (64Bit,100MHz). > > > > Also keep in mind that the bge driver is a > piece > > of crap; driver quality is a much more > telling > > factor in these free OS's than the card in > many > > cases. The EM and FXP are the only drivers > worth > > anything (mainly because neither were written > by > > mass-driver mill man Bill Paul). > > That really sounds bad. I wonder if others can > confirm that. I clarified this in a second post, sorry. I'd recommend trying a copper card with your converter. I've tested that MB and I don't believe the controller is connected to a 64/133Mhz bus. Its less than have the speed (ie twice the load) as an EM card in the PCI-X slot. You can, of course, connect a part to a pci-x buss at 32bits and 33Mhz. Nevertheless, the bge driver with the mobo is suspect (we've had to hack it a bit to get it to work properly with bridging at all). It doesn't seem to want to come up at a gigabit unless you give it an address. The driver is really junk, IMO. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:27:53 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 42A2C16B49C for ; Thu, 1 Jun 2006 14:27:53 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33301.mail.mud.yahoo.com (web33301.mail.mud.yahoo.com [68.142.206.116]) by mx1.FreeBSD.org (Postfix) with SMTP id BB7D643D79 for ; Thu, 1 Jun 2006 14:27:52 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 34877 invoked by uid 60001); 1 Jun 2006 14:27:52 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=4sb82gwUZdC7fneqLTEmN0bglznOWhk/ag5EWPTJ6zpuj/3PQSAVZxJzprxt8akaFOI5wpyJXD9rp74SzzuXDCp0TI2ZUzKD88L4WNTuc2/Ua2EGltiB/mi/9LLMRIZW5v07lpA3sHM6zdXbIDyPiRHV4OOMJa9hwTW7+3nmPGM= ; Message-ID: <20060601142752.34875.qmail@web33301.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33301.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 07:27:52 PDT Date: Thu, 1 Jun 2006 07:27:52 -0700 (PDT) From: Danial Thom To: Chuck Swiger In-Reply-To: <447EF7A3.7040704@mac.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:27:53 -0000 No, I use drivers that are good. I don't feel the need to fix all that is broken in an OS; a good engineer finds what works and what doesn't and adjusts accordingly. Intel controllers are better than broadcom controllers anyways, so simply avoiding broadcom controllers is the strategy of choice. DT --- Chuck Swiger wrote: > Danial Thom wrote: > > Also keep in mind that the bge driver is a > piece > > of crap; driver quality is a much more > telling > > factor in these free OS's than the card in > many > > cases. The EM and FXP are the only drivers > worth > > anything (mainly because neither were written > by > > mass-driver mill man Bill Paul). > > No doubt you've written a truly remarkable > replacement driver which your email > is too small to contain. Unlike Fermat, > however, you've presumably hidden the > proof under the bridge where only trolls may > go. > > I'm tempted to set a Followup-to: header to > -chat or maybe /dev/null... > > -- > -Chuck > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:36:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 29C2016BF41 for ; Thu, 1 Jun 2006 14:36:52 +0000 (UTC) (envelope-from mail@thedoctorsorders.com) Received: from [10.0.1.2] (82-35-247-249.cable.ubr06.dals.blueyonder.co.uk [82.35.247.249]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5348143D45 for ; Thu, 1 Jun 2006 14:36:50 +0000 (GMT) (envelope-from mail@thedoctorsorders.com) User-Agent: IntelliMerge 4.5 Date: Thu, 01 Jun 2006 15:40:26 +0100 From: "The Doctor's Orders" To: Message-ID: <3232021226.91194346515.IM%mail@thedoctorsorders.com> Mime-version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: DJ Deep & More with The Doctor's Orders X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:36:54 -0000 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:39:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 972B916BD62 for ; Thu, 1 Jun 2006 14:39:44 +0000 (UTC) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (chylonia.3miasto.net [213.192.74.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5BEBA43D49 for ; Thu, 1 Jun 2006 14:39:24 +0000 (GMT) (envelope-from wojtek@tensor.3miasto.net) Received: from chylonia.3miasto.net (localhost [127.0.0.1]) by chylonia.3miasto.net (8.13.4/8.13.4) with ESMTP id k51Ed9v6086505 for ; Thu, 1 Jun 2006 16:39:09 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) Received: from localhost (wojtek@localhost) by chylonia.3miasto.net (8.13.4/8.13.4/Submit) with ESMTP id k51Ed9J7086502 for ; Thu, 1 Jun 2006 16:39:09 +0200 (CEST) (envelope-from wojtek@tensor.3miasto.net) X-Authentication-Warning: chylonia.3miasto.net: wojtek owned process doing -bs Date: Thu, 1 Jun 2006 16:39:09 +0200 (CEST) From: Wojciech Puchar X-X-Sender: wojtek@chylonia.3miasto.net To: freebsd-questions@freebsd.org Message-ID: <20060601163116.N85719@chylonia.3miasto.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: snd_uaudio compatibility and multiple USB audio X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:40:40 -0000 question 1: does snd_uaudio works with all "USB sound card" on market? if not - what is supported and how to check when buying? FreeBSD webpage isn't much talkative about this :( question 2: will multiple uaudio devices work without problems in parallel? if yes - can kernel be configured the way device names numbering will be predictable every time system is booted? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:45:18 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A1D3616BD4E for ; Thu, 1 Jun 2006 14:45:18 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33312.mail.mud.yahoo.com (web33312.mail.mud.yahoo.com [68.142.206.127]) by mx1.FreeBSD.org (Postfix) with SMTP id 9A0CA43D6B for ; Thu, 1 Jun 2006 14:45:10 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 41123 invoked by uid 60001); 1 Jun 2006 14:45:09 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=rIsUYdDzcwe+Bwy16G9ycGL7RvQg45z68TGmxUgLDwXMeTFbeVqDJ9twupoQ61MupYRdEnqNdI5pCvJxu++5RXC+vCe7RpQIWC53np79vsOfZkDp/3RnuAKOS0vXV3o6mpMOaRyBnrXzpio7sKoQ0aMLlepN/g6BuujPdSSL28o= ; Message-ID: <20060601144509.41121.qmail@web33312.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33312.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 07:45:09 PDT Date: Thu, 1 Jun 2006 07:45:09 -0700 (PDT) From: Danial Thom To: Chuck Swiger In-Reply-To: <447EF7A3.7040704@mac.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:45:21 -0000 --- Chuck Swiger wrote: > Danial Thom wrote: > > Also keep in mind that the bge driver is a > piece > > of crap; driver quality is a much more > telling > > factor in these free OS's than the card in > many > > cases. The EM and FXP are the only drivers > worth > > anything (mainly because neither were written > by > > mass-driver mill man Bill Paul). > > No doubt you've written a truly remarkable > replacement driver which your email > is too small to contain. Unlike Fermat, > however, you've presumably hidden the > proof under the bridge where only trolls may > go. > > I'm tempted to set a Followup-to: header to > -chat or maybe /dev/null... What exactly is wrong with all of you people anyway? Clearly there are drivers that are well supported and drivers that aren't. There are people out there trying to run their businesses and you seem to want to pretend that everything is just peachy and that everything can be tweaked and tuned a bit to be usable. The poor guy goes out and buys a big honking machine with dual opterons (probably) and he's getting half of the performance out of the box because he's using an ethernet controller thats a piece of crap, or a driver thats a piece of crap, or maybe both. If you're going to call people who tell the truth about things trolls, so be it, but all you're doing is showing your own delusional view of the world, or your own stupidity as an engineer, if you just think that everything works so damn well. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:46:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4376016BF91 for ; Thu, 1 Jun 2006 14:46:56 +0000 (UTC) (envelope-from dan@dan.emsphone.com) Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9C79843D5F for ; Thu, 1 Jun 2006 14:46:54 +0000 (GMT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.13.1/8.13.4) id k51EksRl008946; Thu, 1 Jun 2006 09:46:54 -0500 (CDT) (envelope-from dan) Date: Thu, 1 Jun 2006 09:46:54 -0500 From: Dan Nelson To: Bart Braem Message-ID: <20060601144653.GC97883@dan.emsphone.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: X-OS: FreeBSD 5.5-PRERELEASE X-message-flag: Outlook Error User-Agent: Mutt/1.5.11 Cc: freebsd-questions@freebsd.org Subject: Re: Mail when users over quota X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:47:05 -0000 In the last episode (Jun 01), Bart Braem said: > We are implementing quota on our servers and it worked out fine. But we > would like to warn users with a mail when they are over quota. Is there a > tool that does that? We found warnquota for linux but nothing for FreeBSD. > We are not the only users of quota who want to warn their users with a > mail, right? One way would be to parse the output of "repquota", and send an email to anyone with a "+" in the 2nd column. -- Dan Nelson dnelson@allantgroup.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 14:52:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1EBE116C0E4 for ; Thu, 1 Jun 2006 14:52:56 +0000 (UTC) (envelope-from voodoo@yukon.com.ua) Received: from core.yukon.com.ua (core.yukon.com.ua [213.133.161.126]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6AE2043D73 for ; Thu, 1 Jun 2006 14:52:49 +0000 (GMT) (envelope-from voodoo@yukon.com.ua) Received: from localhost (localhost [127.0.0.1]) by core.yukon.com.ua (Postfix) with ESMTP id 7016B40B0D6 for ; Thu, 1 Jun 2006 17:52:48 +0300 (EEST) Received: from core.yukon.com.ua ([127.0.0.1]) by localhost (core.yukon.com.ua [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 63007-01-20 for ; Thu, 1 Jun 2006 17:52:48 +0300 (EEST) Received: from ADMIN (ucon.kiev.farlep.net [62.221.47.154]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by core.yukon.com.ua (Postfix) with ESMTP id 3B2B340B0D5 for ; Thu, 1 Jun 2006 17:52:48 +0300 (EEST) Date: Thu, 1 Jun 2006 17:54:11 +0300 From: voodoo@yukon.com.ua X-Mailer: The Bat! (v3.5) Professional Organization: Yukon X-Priority: 3 (Normal) Message-ID: <666372646.20060601175411@yukon.com.ua> To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Virus-Scanned: amavisd-new at core.yukon.com.ua Subject: freebsd custom livecd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: voodoo@yukon.com.ua List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 14:52:56 -0000 Sorry, my english is not very well i have some boxes, without HDD. i'd like to setup diskless routers, so i need to create my own livecd, with installed and configured demons(mrtg,proxy,apache and so on) what kind of scripts can do this? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 15:07:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C2A3F16AD9A for ; Thu, 1 Jun 2006 15:07:27 +0000 (UTC) (envelope-from doublef-ctm@yandex.ru) Received: from mx18.yandex.ru (smtp2.yandex.ru [213.180.200.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id D66DA43D53 for ; Thu, 1 Jun 2006 15:07:26 +0000 (GMT) (envelope-from doublef-ctm@yandex.ru) Received: from [83.239.189.253] ([83.239.189.253]:44555 "EHLO shark" smtp-auth: "doublef-ctm" TLS-CIPHER: TLS-PEER-CN1: ) by mail.yandex.ru with ESMTP id S3376134AbWFAPHT (ORCPT ); Thu, 1 Jun 2006 19:07:19 +0400 X-Comment: RFC 2476 MSA function at smtp2.yandex.ru logged sender identity as: doublef-ctm Received: by shark (Postfix, from userid 1000) id E36809DB23; Thu, 1 Jun 2006 19:02:39 +0400 (MSD) Date: Thu, 1 Jun 2006 19:02:39 +0400 From: Sergey Zaharchenko To: snnn Message-ID: <20060601150239.GA50265@shark.localdomain> Mail-Followup-To: Sergey Zaharchenko , snnn , freebsd-questions@freebsd.org References: <447D53FE.5000003@gmail.com> <447DA6D2.2020605@cs.tu-berlin.de> <447E54D4.909@gmail.com> <20060601030705.GA6337@xor.obsecurity.org> <447EA964.5070203@gmail.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="KsGdsel6WgEHnImy" Content-Disposition: inline In-Reply-To: <447EA964.5070203@gmail.com> X-Listening-To: Silence User-Agent: Mutt/1.5.11 Cc: freebsd-questions@freebsd.org Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 15:07:28 -0000 --KsGdsel6WgEHnImy Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello snnn! Thu, Jun 01, 2006 at 04:46:28PM +0800 you wrote: > Kris Kennaway wrote: > >Probably, are you sure that is the CPU you have? > I'm sure. Could it be that you need to recompile your kernel with the CPU_ATHLON_SSE_HACK option? # CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has # forgotten to enable them. --=20 DoubleF No virus detected in this message. Ehrm, wait a minute... /kernel: pid 56921 (antivirus), uid 32000: exited on signal 9 Oh yes, no virus:) --KsGdsel6WgEHnImy Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (FreeBSD) iD8DBQFEfwGPwo7hT/9lVdwRAhq2AJ48v6PdNf32BRWNNlEIqs6tRnDbrQCfX5D5 irJAL60toNQOQbMGmO6EF3s= =nw9H -----END PGP SIGNATURE----- --KsGdsel6WgEHnImy-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 15:14:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 304E316C296 for ; Thu, 1 Jun 2006 15:14:15 +0000 (UTC) (envelope-from stucchi@willystudios.com) Received: from hoover.willystudios.com (hoover.willystudios.com [62.123.150.204]) by mx1.FreeBSD.org (Postfix) with SMTP id CD58843D73 for ; Thu, 1 Jun 2006 15:14:13 +0000 (GMT) (envelope-from stucchi@willystudios.com) Received: (qmail 3883 invoked from network); 1 Jun 2006 15:14:32 -0000 Received: from unknown (HELO max.willystudios.com) (193.25.178.163) by hoover.willystudios.com with SMTP; 1 Jun 2006 15:14:32 -0000 Received: by max.willystudios.com (Postfix, from userid 1000) id 085D5AC9; Thu, 1 Jun 2006 17:18:38 +0200 (CEST) Date: Thu, 1 Jun 2006 17:18:38 +0200 From: Massimiliano Stucchi To: voodoo@yukon.com.ua Message-ID: <20060601151838.GY63977@willystudios.com> References: <666372646.20060601175411@yukon.com.ua> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="oIKd4Ysag+ysiDHn" Content-Disposition: inline In-Reply-To: <666372646.20060601175411@yukon.com.ua> X-Operating-System: FreeBSD 4.10-STABLE X-URL: http://www.willystudios.com/max/ X-Organization: WillyStudios.com User-Agent: Mutt/1.5.6i Cc: freebsd-questions@freebsd.org Subject: Re: freebsd custom livecd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: stucchi@willystudios.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 15:14:19 -0000 --oIKd4Ysag+ysiDHn Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 010606, 17:54, voodoo@yukon.com.ua wrote: > Sorry, my english is not very well > i have some boxes, without HDD. i'd like to setup diskless routers, > so i need to create my own livecd, with installed and configured > demons(mrtg,proxy,apache and so on) > what kind of scripts can do this? Take a look at FreeSBIE. http://www.freesbie.org Ciao ! --=20 Massimiliano Stucchi --oIKd4Ysag+ysiDHn Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFEfwVNFwcpJfdZDoERAlzRAJ971By3WItpe5lgfePlZRgxeg13zACdGbA1 MPBeQArpn551e3Xah3oIQ2k= =/fRH -----END PGP SIGNATURE----- --oIKd4Ysag+ysiDHn-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 15:16:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 63E6E16A523 for ; Thu, 1 Jun 2006 15:16:57 +0000 (UTC) (envelope-from servomac@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.192]) by mx1.FreeBSD.org (Postfix) with ESMTP id EDF9343D45 for ; Thu, 1 Jun 2006 15:16:56 +0000 (GMT) (envelope-from servomac@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so493409nzo for ; Thu, 01 Jun 2006 08:16:56 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=hjbnYOewfZX97cqaO5EukBTNHxd9N9rIQj2QS6mS9/MIGTWDbH58FEvGHSA24+h3+0kYW94Th9UpbXCZpbcWuacvWO+NKXkJhb74vkKh1ZlPeaHAhkTiTWwEqyENscaxkAYwIQDCHXH/ujayeMeUSK7o0P5+lPfdwRtX0aeBS40= Received: by 10.65.141.6 with SMTP id t6mr467431qbn; Thu, 01 Jun 2006 08:16:56 -0700 (PDT) Received: by 10.65.35.13 with HTTP; Thu, 1 Jun 2006 08:16:56 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 17:16:56 +0200 From: "=?ISO-8859-1?Q?Toni_Piz=E0?=" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Troubles with an Intel ethernet card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 15:16:57 -0000 Hi! I have just installed FreeBSD 6.1 Beta, and my Ethernet card hasn't been detected. I'm not able to see them when I do ifconfig. If I search in dmesg, I find this : pci4: at device 0.0 (no driver attached) If I do a lspci from a GNU/Linux liveCD, I obtain this : 0000:03:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02) 0000:04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 20) Using GNU/Linux over this system, I need to use the sky2 driver to use my Ethernet card. Anybody know how can I use this Ethernet card in FreeBSD? Thanks a lot! -- "Two of the most famous products of Berkeley are LSD and Unix. I don't think that this is a coincidence." http://servomac.blogspot.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 15:24:18 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3D7C516A9D7 for ; Thu, 1 Jun 2006 15:24:18 +0000 (UTC) (envelope-from cswiger@mac.com) Received: from smtpout.mac.com (smtpout.mac.com [17.250.248.178]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4F17243D6D for ; Thu, 1 Jun 2006 15:24:17 +0000 (GMT) (envelope-from cswiger@mac.com) Received: from mac.com (smtpin04-en2 [10.13.10.149]) by smtpout.mac.com (Xserve/8.12.11/smtpout08/MantshX 4.0) with ESMTP id k51FOF8Q015181; Thu, 1 Jun 2006 08:24:16 -0700 (PDT) Received: from [192.168.1.251] (pool-68-160-242-211.ny325.east.verizon.net [68.160.242.211]) (authenticated bits=0) by mac.com (Xserve/smtpin04/MantshX 4.0) with ESMTP id k51FODZ5026589 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 1 Jun 2006 08:24:14 -0700 (PDT) Message-ID: <447F069C.4000002@mac.com> Date: Thu, 01 Jun 2006 11:24:12 -0400 From: Chuck Swiger User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: danial_thom@yahoo.com References: <20060601144509.41121.qmail@web33312.mail.mud.yahoo.com> In-Reply-To: <20060601144509.41121.qmail@web33312.mail.mud.yahoo.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 15:24:18 -0000 Danial Thom wrote: [ ... ] >> I'm tempted to set a Followup-to: header to >> -chat or maybe /dev/null... > > What exactly is wrong with all of you people anyway? Why do people ask rhetorical questions? We're not you, evidently. Invert the question, and I get an answer that makes sense. Invert the answer? You don't understand the point, perhaps? Very well, let me put it another way: if your opinions about what's wrong differ from most other people, you might do better to rely on a discussion involving facts rather than opinions. I mention this because some people regard their own opinions so highly that they don't seem to be aware that other approaches exist and might even prove effective. > Clearly there are drivers that are well > supported and drivers that aren't. There are > people out there trying to run their businesses > and you seem to want to pretend that everything > is just peachy and that everything can be tweaked > and tuned a bit to be usable. I don't know about either the OP or your situation(s), but I'm generally of the opinion that FreeBSD works just fine, most of the time, on most hardware, without any specific tweaking or tuning to be entirely usable. That's true of some other platforms, such as Apple hardware and MacOS X, or even Sun/SPARC boxes, as well. YMMV. If you have specific problems or a FreeBSD-driver to Windows-driver performance comparison, providing #'s and enough details to reproduce would be helpful. Writing random flames about specific people is not helpful. [ ...EOT, at least for me... ] -- -Chuck From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 15:45:03 2006 Return-Path: X-Original-To: questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F08C116A476 for ; Thu, 1 Jun 2006 15:45:02 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33311.mail.mud.yahoo.com (web33311.mail.mud.yahoo.com [68.142.206.126]) by mx1.FreeBSD.org (Postfix) with SMTP id 7B95043D48 for ; Thu, 1 Jun 2006 15:45:02 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 65937 invoked by uid 60001); 1 Jun 2006 15:44:36 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=LpJuVDV/OZSfJST3rAhaWTvn65qiPTyT3YSfPKCZbAxHoDQFw408DnVI7KgD4EqgMxW2ebqyJzljlsc9OVjFXSIee3ZfoUxGJFhUperQNLS1kAH61k4lU8w4YJQ5fDKx0nsrEqzLiHVGkFolaZAUeWqttKwF+//OJfoqHEmp29g= ; Message-ID: <20060601154436.65932.qmail@web33311.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33311.mail.mud.yahoo.com via HTTP; Thu, 01 Jun 2006 08:44:36 PDT Date: Thu, 1 Jun 2006 08:44:36 -0700 (PDT) From: Danial Thom To: Chuck Swiger In-Reply-To: <447F069C.4000002@mac.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@FreeBSD.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 15:45:03 -0000 --- Chuck Swiger wrote: > Danial Thom wrote: > [ ... ] > >> I'm tempted to set a Followup-to: header to > >> -chat or maybe /dev/null... > > > > What exactly is wrong with all of you people > anyway? > > Why do people ask rhetorical questions? We're > not you, evidently. > > Invert the question, and I get an answer that > makes sense. > Invert the answer? You don't understand the > point, perhaps? > > Very well, let me put it another way: if your > opinions about what's wrong > differ from most other people, you might do > better to rely on a discussion > involving facts rather than opinions. I > mention this because some people > regard their own opinions so highly that they > don't seem to be aware that > other approaches exist and might even prove > effective. > > > Clearly there are drivers that are well > > supported and drivers that aren't. There are > > people out there trying to run their > businesses > > and you seem to want to pretend that > everything > > is just peachy and that everything can be > tweaked > > and tuned a bit to be usable. > > I don't know about either the OP or your > situation(s), but I'm generally of > the opinion that FreeBSD works just fine, most > of the time, on most hardware, > without any specific tweaking or tuning to be > entirely usable. > > That's true of some other platforms, such as > Apple hardware and MacOS X, or > even Sun/SPARC boxes, as well. YMMV. > > If you have specific problems or a > FreeBSD-driver to Windows-driver > performance comparison, providing #'s and > enough details to reproduce would be > helpful. Writing random flames about specific > people is not helpful. > > [ ...EOT, at least for me... ] > > -- > -Chuck > thanks for clarifying that you're more of a clown than an engineer, chuck. I'm sure that info will come in handy for others when you state your opinions. Here's the deal. When passing a controlled stream of packets (say 10Kpps) through a 5704 controller on the tyan MB, the cpu load is twice what it is when passing the exact same load through an intel card in a pci-x slot. Maybe the intel card is superior, maybe the driver is superior, but the bottom line is that the broadcom sucks in comparision. I don't care if the card works well in windows or something else; its not practical to re-write the driver, and the intel cards are cheap, so why give a rat's butt why the results are what they are; I just use something else. Perhaps you take exception to my comment about the author of the driver, but the fact is that the guy wrote 50 drivers from a template, he doesn't support them, he didn't optimize them for performance, nor did he thoroughly test most of them (since most have stupid little quirks, which is what happens when you write a driver from a template). That spells trouble to me. The intel drivers are supported on an ongoing basis and they were written specifically for the controller, so they ought to work better, even if the hardware is identical performance-wise. Its not a "flame" to say that something works better than something else. If you think that all hardware and all drivers just either work or don't, then you're not only not an engineer, but a total fool. Its sharing my experience. If you care not to listen, fine, but you're making more noise calling me names for reiterating my experience, and at least I'm conveying information that might be useful, unlike yourself. You obviously have nothing to contribute, so I don't see why you feel the need to pipe in with an uneducated opinion. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 16:08:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CF1B216A5A9 for ; Thu, 1 Jun 2006 16:08:09 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2DA9543D45 for ; Thu, 1 Jun 2006 16:08:08 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so368814pye for ; Thu, 01 Jun 2006 09:08:08 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=aQpfRiNrMIG3+mwji9GQV1T3OR7ZL1sqCkI3n3ImWuCVo2/WrB9sMdTUEuRxcinw+vf1wnZllMm5Upf5CVfBw60HKlK2xwjsCQgqlYpUn7xYyfCBFvQystfXhEJcekBy+iFxT0JekzBAxiJ+1PIlWQe9oeiF8rIf9e0HCTk34bc= Received: by 10.35.12.13 with SMTP id p13mr1077383pyi; Thu, 01 Jun 2006 09:08:08 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Thu, 1 Jun 2006 09:08:08 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 18:08:08 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> <20060531213231.T9892@fledge.watson.org> Subject: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 16:08:10 -0000 I have been trying to get my wireless card working for the last week. Practically I read almost everything about it in man pages, handbook and some google results. Nothing worked. I just cannot see why it doesn't appear. I am doing the kernel module compilation and loading by the book. My last resort is kernel recompilation. Does anyone have a HP/Compaq nx6110 with a working wireless card? Atanas From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 16:35:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1C1D216AF04 for ; Thu, 1 Jun 2006 16:35:02 +0000 (UTC) (envelope-from nawcom@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.207]) by mx1.FreeBSD.org (Postfix) with ESMTP id C812243D45 for ; Thu, 1 Jun 2006 16:35:00 +0000 (GMT) (envelope-from nawcom@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so320767nzf for ; Thu, 01 Jun 2006 09:35:00 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:user-agent:mime-version:to:subject:references:in-reply-to:content-type:content-transfer-encoding; b=C/fs1NNZEFtqvQOUeRMAXxpu93+RdOxjn5lFDyO1Wd0lpsK7Trxt3pweYqlzlzvnxhDLnNq/cqbErcrNk95KV4KTLR5KdDS2H5omWu7TuYPojKGHF0mPtcQG8lDBP5L5HtqP9gu5mZsiOfHpQsbv6v2huon1zSgiCFCP9sJmqoI= Received: by 10.36.251.19 with SMTP id y19mr1211305nzh; Thu, 01 Jun 2006 09:34:59 -0700 (PDT) Received: from ?71.148.28.185? ( [71.148.28.185]) by mx.gmail.com with ESMTP id c12sm2007903nzc.2006.06.01.09.34.56; Thu, 01 Jun 2006 09:34:59 -0700 (PDT) Message-ID: <447F4149.7@gmail.com> Date: Thu, 01 Jun 2006 12:34:33 -0700 From: nawcom User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060505) MIME-Version: 1.0 To: Atanas Atanasov , freebsd-questions@freebsd.org References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> <20060531213231.T9892@fledge.watson.org> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 16:35:06 -0000 could you tell us what wireless card you have? perhaps its unsupported and you will need ndis support. -ben > I have been trying to get my wireless card working for the last week. > Practically I read almost everything about it in man pages, handbook > and some google results. Nothing worked. I just cannot see why it > doesn't appear. I am doing the kernel module compilation and loading > by the book. My last resort is kernel recompilation. Does anyone have > a HP/Compaq nx6110 with a working wireless card? > > Atanas > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 17:15:53 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D8DE716A437 for ; Thu, 1 Jun 2006 17:15:53 +0000 (UTC) (envelope-from infofarmer@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2991043D46 for ; Thu, 1 Jun 2006 17:15:52 +0000 (GMT) (envelope-from infofarmer@gmail.com) Received: by wx-out-0102.google.com with SMTP id i31so233571wxd for ; Thu, 01 Jun 2006 10:15:52 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:sender:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references:x-google-sender-auth; b=XhQQXx8xFCiTiad8SZNmKuHfWHefo6f7LZbz86rO1UtIsSyMRvbbwQ7RwhC+1rYj8XKPn2TAaLfDgfFmhdALNGOrmw92kWd2+kkZmKaYhhzDJQRFT/HP/tzXd4digGr3dhwDL1rLnlef1wxXFLhRpL6AXjaKlm4CbYwpcaIdenA= Received: by 10.70.6.1 with SMTP id 1mr1043142wxf; Thu, 01 Jun 2006 10:15:52 -0700 (PDT) Received: by 10.70.50.15 with HTTP; Thu, 1 Jun 2006 10:15:52 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 21:15:52 +0400 From: "Andrew Pantyukhin" Sender: infofarmer@gmail.com To: "Eugene M. Minkovskii" In-Reply-To: <20060601111305.GA6660@mccme.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: base64 Content-Disposition: inline References: <20060601111305.GA6660@mccme.ru> X-Google-Sender-Auth: e6b8a430d737bd7f Cc: questions@freebsd.org Subject: Re: bug in tcpdump? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 17:16:01 -0000 T24gNi8xLzA2LCBFdWdlbmUgTS4gTWlua292c2tpaSA8ZW1pbkBtY2NtZS5ydT4gd3JvdGU6Cj4g SXQgc2VlbXMgdG8gbWUgdGhhdCBJIHNlZSBhIGJ1ZyBpbiB0Y3BkdW1wKDEpOiBvcHRpb24gLUEg d29ya2luZwo+IHNhbWUgYXMgLXggYW5kIGRvbid0IHByb2R1Y2UgQVNDSUkgb3V0cHV0LgoK8M/Q 0s/C1cog1MHLOiB0Y3BkdW1wIC1ucHggLWkgaWZhY2UKCj4gKEkgdXNlIEZyZWVCU0QgNi4xKQo+ Cj4gLS0KPiBTZW5zb3J5ICB5b3VycywgRXVnZW5lICBNaW5rb3Zza2lpCj4g88XO08/Szs8g18Hb LCAgIOXXx8XOycog7cnO2MvP19PLycoKClNlbnNvcnkgLSDQ0snMwcfB1MXM2M7PxSwgzsHSxd7J xSAtIHNlbnNvcmlhbGx5Cg== From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 17:43:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E2F9B16A727 for ; Thu, 1 Jun 2006 17:43:34 +0000 (UTC) (envelope-from SRS0=JJuRJ8=7U=shell.siscom.net=vogelke@siscom.net) Received: from lamorack.siscom.net (lamorack.siscom.net [209.251.2.116]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6954743D55 for ; Thu, 1 Jun 2006 17:43:34 +0000 (GMT) (envelope-from SRS0=JJuRJ8=7U=shell.siscom.net=vogelke@siscom.net) Received: from shell.siscom.net ([209.251.2.80]) by lamorack.siscom.net with esmtp (Exim 4.52) id 1FlrCi-0006n7-EH; Thu, 01 Jun 2006 13:43:28 -0400 Received: by shell.siscom.net (Postfix, from userid 2198) id 5747B115529; Thu, 1 Jun 2006 13:43:28 -0400 (EDT) Date: 1 Jun 2006 13:31:50 -0400 Message-ID: <20060601173150.60656.qmail@kev.nowhere.usa> From: "Karl Vogel" To: andrew@scoop.co.nz In-reply-to: <20060601122627.F62075@a2.scoop.co.nz> (message from Andrew McNaughton on Thu, 1 Jun 2006 12:54:24 +1200 (NZST)) Organization: Sumaria Systems Inc. X-Disclaimer: I don't speak for the USAF or Sumaria. X-PGP-ID: 1024/D558F237 1999/04/06 Karl Vogel X-PGP-Fingerprint: 8DF5 1D90 18EC A9EF 9EA6 4611 35F4 BC78 D558 F237 References: <20060531230821.T62075@a2.scoop.co.nz> <20060531082354.5e9fbb90.wmoran@collaborativefusion.com> <20060601122627.F62075@a2.scoop.co.nz> Cc: freebsd-questions@freebsd.org, wmoran@collaborativefusion.com Subject: Re: getting alerts about system upgrades X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: vogelke@pobox.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 17:43:47 -0000 >> On Thu, 1 Jun 2006 12:54:24 +1200 (NZST), >> Andrew McNaughton said: A> I do that, but my mailbox gets lots of traffic. Sometimes I miss A> something, and as far as I know, there's no system to keep reminding me, A> nor a way to quickly check the current state of play. I have the same problem, so I run the script below hourly from cron to check my mailbox for anything I consider urgent. It won't nag me repeatedly about the same messages, so it's not too intrusive. The file "$HOME/.whitelist-alert" holds patterns (one per line) for messages that should get immediate attention. The patterns are mostly email addresses or words consistently found in subject lines. The "xnote" program is simply a driver for "xalarm", which displays an X-windows popup message. -- Karl Vogel I don't speak for the USAF or my company vogelke at pobox dot com http://www.pobox.com/~vogelke The early bird still has to eat worms. =========================================================================== #!/bin/sh # look for important messages. PATH=/bin:/usr/bin:/usr/local/bin export PATH umask 077 # Any mail? mbox="/var/mail/$USER" if test -s "$mbox" then old="$HOME/.priority" new="$HOME/.priority.n" fgrep -if $HOME/.whitelist-alert $mbox > $new # don't say anything unless we have new priority mail. if test -s "$new" then cmp -s $old $new || xnote "you have high-priority mail" fi mv $new $old fi exit 0 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 18:08:16 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 14F1B16ADA7 for ; Thu, 1 Jun 2006 18:08:16 +0000 (UTC) (envelope-from jfalconer@puc.edu) Received: from ecf2.puc.edu (ecf2.puc.edu [67.134.132.32]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8437A43D48 for ; Thu, 1 Jun 2006 18:08:15 +0000 (GMT) (envelope-from jfalconer@puc.edu) Received: from localhost (jfalconer@localhost) by ecf2.puc.edu (8.11.6/8.10.1) with ESMTP id k51I8E928090 for ; Thu, 1 Jun 2006 11:08:14 -0700 (PDT) Date: Thu, 1 Jun 2006 11:08:14 -0700 (PDT) From: Jon Falconer To: questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: Subject: difference between deinstall and pkg_delete? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 18:08:19 -0000 Greetings, I see in the man page for ports the following: reinstall Use this to restore a port after using pkg_delete(1) when you should have used deinstall. So I'm wondering what is the difference between pkg_delete and using "make deinstall" from within the ports directory? What does "make deinstall" do that pkg_delete does not do? What does pkg_delete do that "make deinstall" does not do? Thanks, Jon From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 18:21:46 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7600B16AACE for ; Thu, 1 Jun 2006 18:21:46 +0000 (UTC) (envelope-from atom.powers@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 729A143D53 for ; Thu, 1 Jun 2006 18:21:36 +0000 (GMT) (envelope-from atom.powers@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so549966nzo for ; Thu, 01 Jun 2006 11:21:35 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=lcgRjOX4eDws48JrwfiBwEtBM0tM3hyoRfZQX+F9IsuXdhx1yYTLAYr8f4ZqBiWaeOQ7w4I8DnTspaYp/MYHGmmQVs1ASyhbu72nh/E7w1iF+2qT+c8DaL2mmstDd3O0SD0ndsnTtxpswXvnKXmPyZ1N1N1x+XEbTQPylK5fUD8= Received: by 10.65.206.14 with SMTP id i14mr653258qbq; Thu, 01 Jun 2006 11:21:35 -0700 (PDT) Received: by 10.65.154.19 with HTTP; Thu, 1 Jun 2006 11:21:35 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 11:21:35 -0700 From: "Atom Powers" To: "Norberto Meijome" In-Reply-To: <20060601231922.092460ea@localhost> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <447EAE41.9090005@esiee.fr> <20060601231922.092460ea@localhost> Cc: Frank Bonnet , freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 18:21:50 -0000 On 6/1/06, Norberto Meijome wrote: > On Thu, 01 Jun 2006 11:07:13 +0200 > Frank Bonnet wrote: > > > Hello > > > > I'm searching for some tools that are able to produce > > some graphics ( understandables by managers ...) to > > show the system load ( CPU . DISK I/O , memory ... etc etc ) > > > > http://www.cacti.net/ > Seconded. I used cricket (an mrtg clone) for a long time. But cacti makes setting up the hosts and graphs so much easier. (Although I still have to figure out how to create custom data sources...) -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:04:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CC3A016A70D for ; Thu, 1 Jun 2006 19:04:19 +0000 (UTC) (envelope-from security@yourdot-mail.com) Received: from jupiter.nswebhost.com (jupiter.nswebhost.com [66.246.252.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3EE3043D58 for ; Thu, 1 Jun 2006 19:04:18 +0000 (GMT) (envelope-from security@yourdot-mail.com) Received: from 55-144.dial.nortenet.pt ([212.13.55.144]:34659 helo=[192.168.1.13]) by jupiter.nswebhost.com with esmtpa (Exim 4.52) id 1FlrXW-0005H2-PO for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 13:04:59 -0500 Message-ID: <447F3A1B.4030400@yourdot-mail.com> Date: Thu, 01 Jun 2006 20:03:55 +0100 From: Carlos Silva User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-ClamAntiVirus-Scanner: This mail is clean X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - jupiter.nswebhost.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - yourdot-mail.com X-Source: X-Source-Args: X-Source-Dir: Subject: divx2dvd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:04:24 -0000 hi, someone know a program to convert a DivX to DVD file in gui? -- Best Regards, Carlos Silva, CSilva Web: http://www.csilva.org/ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:09:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2641216ACA6 for ; Thu, 1 Jun 2006 19:09:53 +0000 (UTC) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.204.220]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7A19443D78 for ; Thu, 1 Jun 2006 19:09:47 +0000 (GMT) (envelope-from scrappy@hub.org) Received: from localhost (mx1.hub.org [200.46.208.251]) by hub.org (Postfix) with ESMTP id 89219290C1F; Thu, 1 Jun 2006 16:09:44 -0300 (ADT) Received: from hub.org ([200.46.204.220]) by localhost (mx1.hub.org [200.46.208.251]) (amavisd-new, port 10024) with ESMTP id 54268-05; Thu, 1 Jun 2006 16:09:46 -0300 (ADT) Received: from ganymede.hub.org (blk-7-151-244.eastlink.ca [71.7.151.244]) by hub.org (Postfix) with ESMTP id 12D3E290C1E; Thu, 1 Jun 2006 16:09:44 -0300 (ADT) Received: by ganymede.hub.org (Postfix, from userid 1000) id 7501C8A667; Thu, 1 Jun 2006 16:09:46 -0300 (ADT) Received: from localhost (localhost [127.0.0.1]) by ganymede.hub.org (Postfix) with ESMTP id 740538A62A; Thu, 1 Jun 2006 16:09:46 -0300 (ADT) Date: Thu, 1 Jun 2006 16:09:46 -0300 (ADT) From: "Marc G. Fournier" To: Norberto Meijome In-Reply-To: <20060601231922.092460ea@localhost> Message-ID: <20060601160641.Q1114@ganymede.hub.org> References: <447EAE41.9090005@esiee.fr> <20060601231922.092460ea@localhost> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Cc: Frank Bonnet , freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:09:59 -0000 On Thu, 1 Jun 2006, Norberto Meijome wrote: > On Thu, 01 Jun 2006 11:07:13 +0200 > Frank Bonnet wrote: > >> Hello >> >> I'm searching for some tools that are able to produce >> some graphics ( understandables by managers ...) to >> show the system load ( CPU . DISK I/O , memory ... etc etc ) >> >> The purpose is to show how the machine ( mailhub ) is loaded >> to replace it by a stronger box. >> >> TIA > > http://www.cacti.net/ I tried cacti, and I don't know if its FreeBSD itself, or cacti, but other then traffic stats, it sucked ... i was getting sys+usr+idle CPU %ages taht were adding up to 115% (or similar high #s) ... I really wish that FreeBSD had something a bit better built into the kernel itself, to give you averages, similar to loadavg ... some easy way to determine % busy of disks, ethernet, cpu, etc ... ---- Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email . scrappy@hub.org MSN . scrappy@hub.org Yahoo . yscrappy Skype: hub.org ICQ . 7615664 From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:13:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DA8C616B1D3 for ; Thu, 1 Jun 2006 19:13:33 +0000 (UTC) (envelope-from mark@mkproductions.org) Received: from ylpvm43.prodigy.net (ylpvm43-ext.prodigy.net [207.115.57.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5F15E43D45 for ; Thu, 1 Jun 2006 19:13:33 +0000 (GMT) (envelope-from mark@mkproductions.org) Received: from pimout2-ext.prodigy.net (pimout2-int.prodigy.net [207.115.4.217]) by ylpvm43.prodigy.net (8.12.10 outbound/8.12.10) with ESMTP id k51JDY4O007992 for ; Thu, 1 Jun 2006 15:13:34 -0400 X-ORBL: [68.94.148.44] Received: from localhost (adsl-68-94-148-44.dsl.spfdmo.swbell.net [68.94.148.44]) by pimout2-ext.prodigy.net (8.13.6 out.dk/8.13.6) with ESMTP id k51JDR9X143452; Thu, 1 Jun 2006 15:13:30 -0400 Date: Thu, 1 Jun 2006 14:13:26 -0500 From: Mark Kane To: Carlos Silva Message-ID: <20060601141326.1fdc0811@localhost> In-Reply-To: <447F3A1B.4030400@yourdot-mail.com> References: <447F3A1B.4030400@yourdot-mail.com> X-Mailer: Sylpheed-Claws 2.3.0-rc4 (GTK+ 2.8.17; x86_64-unknown-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: divx2dvd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:13:37 -0000 On Thu, Jun 01, 2006, at 20:03:55 +0100, Carlos wrote: > hi, > > someone know a program to convert a DivX to DVD file in gui? > Hi. Try Avidemux. It's in ports at /usr/ports/multimedia/avidemux2 -Mark -- Internet Radio: Party107 (Trance/Electronic) - http://www.party107.com Rock 101.9 The Edge (Rock) - http://www.rock1019.net IRC: MIXXnet IRC Network - irc.mixxnet.net (Nick: MIXX941) GnuPG Public Key: http://www.mkproductions.org/mk_pubkey.asc From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:32:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D1E0216A520 for ; Thu, 1 Jun 2006 19:32:55 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id 54E2143D46 for ; Thu, 1 Jun 2006 19:32:55 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so423072pye for ; Thu, 01 Jun 2006 12:32:54 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=nd1a0tyxi4A+Xv2SvOGJPZRCMeeTItMoA1Pw4nlzRfvXwu+Xf5l/Y5e39tNERAWoJwfR73G5L+ij4aZg3GxFqpV3uy8JefVfcSLqTb4qlaU8BxWvteTfaTHzYhUJNaGuCJ/V/L+D2UueHdKUFVFfteG7xRuDwAuHWq9dWpC3K6s= Received: by 10.35.15.11 with SMTP id s11mr1380380pyi; Thu, 01 Jun 2006 12:32:54 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Thu, 1 Jun 2006 12:32:54 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 21:32:54 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: <447F4149.7@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> <20060531213231.T9892@fledge.watson.org> <447F4149.7@gmail.com> Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:32:56 -0000 The wireless card is not supported by a native driver. It has a BCM4306 chipset (Broadcom). Atanas From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:36:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EDDF016B2A7 for ; Thu, 1 Jun 2006 19:36:24 +0000 (UTC) (envelope-from beni@brinckman.info) Received: from kim-out.schedom-europe.net (kim.schedom-europe.net [193.109.184.78]) by mx1.FreeBSD.org (Postfix) with SMTP id 1BF6443D48 for ; Thu, 1 Jun 2006 19:36:23 +0000 (GMT) (envelope-from beni@brinckman.info) Received: (qmail 8128 invoked from network); 1 Jun 2006 19:36:22 -0000 Received: from unknown (HELO kim.schedom-europe.net) (193.109.184.78) by kim.schedom-europe.net with SMTP; 1 Jun 2006 19:36:22 -0000 Received: (qmail 7757 invoked from network); 1 Jun 2006 19:36:06 -0000 Received: from unknown (HELO ?192.168.1.100?) (83.101.7.10) by kim.schedom-europe.net with SMTP; 1 Jun 2006 19:36:06 -0000 From: Beni To: freebsd-questions@freebsd.org Date: Thu, 1 Jun 2006 21:36:05 +0200 User-Agent: KMail/1.9.1 References: In-Reply-To: X-Face: %*c?V7%A[c.}s2rI*TaRWm-[I-, ZLpBKmmC-@)J}KGbr)=a, TsXSA=:ArC(<=?utf-8?q?v=5C/=5F=25BaB=24K=0A=09=24=60E=7D6=7EyjIqu/SN=3A=24Pb=7DGngR+8=3D?= =?utf-8?q?dE=60?=)V~48zl6) =?utf-8?q?BhEtfQ2=3D=7ChScx=3Frn30d!QMd=3F=2E=60/hR!l+=0A=09x?=(]+zXesMf?'W[>46aPKMAAwd7eT{X_O9besb[u]'Y(DAe MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606012136.06294.beni@brinckman.info> X-Antivirus: This mail has been scanned for viruses by schedom vof (http://www.dommel.com) Subject: Re: USB /root shutdown freeze X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:36:25 -0000 On Tuesday 23 May 2006 14:07, markus@ing.umu.se wrote: > I have 6.1-RELEASE installed on a disk in an external USB 2.0 disk > chassis. It successfully boots a computer and becomes da0. However, it is > not able to shutdown or reboot, as the system freezes before it shuts > down. > > --- begin --- > # shutdown -h now Try a "shutdown -p now" instead of a "-h". From "man shutdown" : [...] The shutdown utility provides an automated shutdown procedure for super- users to nicely notify users when the system is shutting down, saving them from system administrators, hackers, and gurus, who would otherwise not bother with such niceties. The following options are available: -h The system is halted at the specified time. -p The system is halted and the power is turned off (hardware sup- port required) at the specified time. [...] Hope this helps, Beni. > [...] > > System shutdown time has arrived > Shutting down daemon processes:. > Stopping cron. > Shutting down local daemons:. > Writing entropy file:. > Terminated > . > May 22 13:54:48 allegra syslogd: exiting on signal 15 > Waiting (max 60 seconds) for system process 'vnlru' to stop...done > Waiting (max 60 seconds) for system process 'bufdaemon' to stop...done > Waiting (max 60 seconds) for system process 'syncer' to stop...done > Syncing disks, vnodes remaining...8 4 4 2 2 0 0 done > All buffers synced. > Uptime: 40s > > --- end --- > This is the point where system stops doing things and not responding to > anything but five-secs-powerbutton. > > The system was installed by issuing > > 1. Regular FreeBSD install on internal ATA > 2. fdisk, bsdlabel, mount USB-disk > 3. dump | restore > 4. Fix fstab > > The computer is a Dell Latitued D400 (the problem is reproducable on a > number of other computers). The harddisk is a Maxtor DiamondMax 10 250GB > IDE. The chassis is Amitech something. > > I appreciate any ideas! > > > - markus > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 19:52:58 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4C39716B445 for ; Thu, 1 Jun 2006 19:52:58 +0000 (UTC) (envelope-from nawcom@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id BB8CE43D45 for ; Thu, 1 Jun 2006 19:52:57 +0000 (GMT) (envelope-from nawcom@gmail.com) Received: by nz-out-0102.google.com with SMTP id m7so358897nzf for ; Thu, 01 Jun 2006 12:52:57 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=fHw5FApDJn1r94mqZS61l3ntM38raEZ1U7OqfjTSo/TwQtDrnynN3TJfjt0km2tfqnsAEgPxZuoHyK1jKs7LgpsG8/8Y09X9HzJOcm7oWHiICrnIbBLzG1JbCCqSTVv4Ln2mUKyTWIRhiovfghFA7swzw271J91qiVd3xsfeTsA= Received: by 10.36.34.8 with SMTP id h8mr1510356nzh; Thu, 01 Jun 2006 12:52:57 -0700 (PDT) Received: from ?71.148.28.185? ( [71.148.28.185]) by mx.gmail.com with ESMTP id e1sm1070817nzd.2006.06.01.12.52.56; Thu, 01 Jun 2006 12:52:57 -0700 (PDT) Message-ID: <447F6FBF.5070503@gmail.com> Date: Thu, 01 Jun 2006 15:52:47 -0700 From: nawcom User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060505) MIME-Version: 1.0 To: Atanas Atanasov References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <200605290912.49807.mark@msen.com> <007301c684b0$4537c070$0201a8c0@AMD1700> <20060531213231.T9892@fledge.watson.org> <447F4149.7@gmail.com> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 19:52:59 -0000 following the isntructions on this post worked fine for me; give it a try http://lists.freebsd.org/pipermail/freebsd-questions/2004-October/059938.html Atanas Atanasov wrote: > The wireless card is not supported by a native driver. It has a > BCM4306 chipset (Broadcom). > > Atanas > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:03:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 76B9516A576 for ; Thu, 1 Jun 2006 20:03:43 +0000 (UTC) (envelope-from thenasko@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id F00CF43D45 for ; Thu, 1 Jun 2006 20:03:42 +0000 (GMT) (envelope-from thenasko@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so429426pye for ; Thu, 01 Jun 2006 13:03:42 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=igNcBz+a6CVKr5A+XvX9v2SZavM9AdNKy3djpQo54C/6hKN/jgDtskbYuDS+hMZGHKc4zjAyRoqeXkJ0IPQBCHGx6kgq4ibHKNvwvyZ2XdYCNqKhjfW3n3ctLtlv+oqLw5dqWRCH9rwB7qQF6cv0FSI93mIeFXNB1WwX0dZpzaU= Received: by 10.35.36.13 with SMTP id o13mr1444132pyj; Thu, 01 Jun 2006 13:03:42 -0700 (PDT) Received: by 10.35.52.11 with HTTP; Thu, 1 Jun 2006 13:03:42 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 22:03:42 +0200 From: "Atanas Atanasov" To: freebsd-questions@freebsd.org In-Reply-To: <447F6FBF.5070503@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <007301c684b0$4537c070$0201a8c0@AMD1700> <20060531213231.T9892@fledge.watson.org> <447F4149.7@gmail.com> <447F6FBF.5070503@gmail.com> Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:03:45 -0000 Are you sure one should use ndiscvt? I mean i tried it the same except for getting pccarddefs.h (which as they say will be used in eventual kernel compiles) and for synchronising the source which I cannot do because no network is available. I have wireless only connection. Most people say that ndisgen is the "better" method as from 6.0. Actually it seems due to unknown reasons the old method is not supported anymore. Atanas From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:33:34 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E8A2F16B86C for ; Thu, 1 Jun 2006 20:33:34 +0000 (UTC) (envelope-from atom.powers@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2ECD143D58 for ; Thu, 1 Jun 2006 20:33:26 +0000 (GMT) (envelope-from atom.powers@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so581393nzo for ; Thu, 01 Jun 2006 13:33:26 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=K4ok620iT5luTXB+1beKIYvIi0gA3I2NCA/60I5+ygyWaPMkIPO5CF47Z9yEyiB89rImW9vGtmVtqKkXIIc10deGs8BF8cE7TcBvZul0PTtAcl1MrvZTeGWOdof0HWCqc26ckIFHwlvzNgXWEZnY0SZCsazBWmDezZLmlU1b1vw= Received: by 10.64.150.17 with SMTP id x17mr811855qbd; Thu, 01 Jun 2006 13:33:25 -0700 (PDT) Received: by 10.65.154.19 with HTTP; Thu, 1 Jun 2006 13:33:25 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 13:33:25 -0700 From: "Atom Powers" To: "Marc G. Fournier" In-Reply-To: <20060601160641.Q1114@ganymede.hub.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <447EAE41.9090005@esiee.fr> <20060601231922.092460ea@localhost> <20060601160641.Q1114@ganymede.hub.org> Cc: Frank Bonnet , Norberto Meijome , freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:33:55 -0000 On 6/1/06, Marc G. Fournier wrote: > On Thu, 1 Jun 2006, Norberto Meijome wrote: > > I tried cacti, and I don't know if its FreeBSD itself, or cacti, but other > then traffic stats, it sucked ... i was getting sys+usr+idle CPU %ages > taht were adding up to 115% (or similar high #s) ... > This is a problem with the way system load is reported to the SNMP agent, not cacti itself. Any other tool you would use to read SNMP data would give the same result. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:40:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BEF5416BA65 for ; Thu, 1 Jun 2006 20:40:36 +0000 (UTC) (envelope-from atom.powers@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id BA5CE43D49 for ; Thu, 1 Jun 2006 20:40:25 +0000 (GMT) (envelope-from atom.powers@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so582608nzo for ; Thu, 01 Jun 2006 13:40:25 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=ZEu4JIy1yM0Ia9S7CZnCVZX3aMYaKzWS+j3pmTFKGhLDcztm/sZheA35b3VznIb5+gt6aK4h2WpvF4d0SjlTaIhbMJzs7+XGZk7ryQvhH3O+MFHKYOsP/bePTygMok79pSZbE9Q/MNEScCfdlQ75jnTBqLWba2GK4pKXJT1b6ys= Received: by 10.65.236.9 with SMTP id n9mr836671qbr; Thu, 01 Jun 2006 13:40:25 -0700 (PDT) Received: by 10.65.154.19 with HTTP; Thu, 1 Jun 2006 13:40:25 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 13:40:25 -0700 From: "Atom Powers" To: "User Gandalf" In-Reply-To: <447EA884.8010602@messias.qhigh.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <447EA884.8010602@messias.qhigh.com> Cc: freebsd-questions@freebsd.org Subject: Re: scponlyc on 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:40:42 -0000 On 6/1/06, User Gandalf wrote: > > Hello, > > > I have installed scponlyc with the chroot option: > > Now if I try to do 'su -l scpuser' then I do not get any error messages > but nothing happens. If I try to login with WinSCP, it tells me that my > shell is incompatible with bash. > Is this a problem with the port? What am I doing wrong? What logfiles > should I check? (/var/log/messages tell nothing...) > what is your output from "pw showuser scpuser"? The last part of the line should match the output of "which scponly". Never used WinSCP, but it sounds like it's trying to execute bash, or maybe scponly is symlinked to bash? I recommend FileZilla for MS Windows sftp needs. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:42:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E0FEC16BBBC; Thu, 1 Jun 2006 20:42:39 +0000 (UTC) (envelope-from ml@netfence.it) Received: from parrot.aev.net (parrot.aev.net [212.31.247.179]) by mx1.FreeBSD.org (Postfix) with ESMTP id CE07C43D60; Thu, 1 Jun 2006 20:42:35 +0000 (GMT) (envelope-from ml@netfence.it) Received: from soth.ventu (adsl-ull-125-192.51-151.net24.it [151.51.192.125]) (authenticated bits=128) by parrot.aev.net (8.13.6/8.13.6) with ESMTP id k51KmDJ3035020 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Thu, 1 Jun 2006 22:48:19 +0200 (CEST) (envelope-from ml@netfence.it) Received: from [10.1.2.18] (alamar.ventu [10.1.2.18]) by soth.ventu (8.13.6/8.13.3) with ESMTP id k51KgASN028760; Thu, 1 Jun 2006 22:42:11 +0200 (CEST) (envelope-from ml@netfence.it) Message-ID: <447F511E.6020102@netfence.it> Date: Thu, 01 Jun 2006 22:42:06 +0200 From: Andrea Venturoli User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Lowell Gilbert References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> In-Reply-To: <44d5dtqdyu.fsf@be-well.ilk.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Scanned-By: MIMEDefang 2.53 on 212.31.247.179 Cc: freebsd-openoffice@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:42:51 -0000 Lowell Gilbert wrote: > Andrea Venturoli writes: > >> I reported it several months ago and all I got to be told was that >> it's a strange problem. > > Well, that's true... > > Do you have devel/epm installed by any chance? Same questions of some months ago... :) No, I don't have epm and never did. bye & Thanks av. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:45:59 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C35C16BB07 for ; Thu, 1 Jun 2006 20:45:59 +0000 (UTC) (envelope-from bcook@poklib.org) Received: from c.mx.poklib.org (c.mx.poklib.org [64.72.87.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 01D0943D7E for ; Thu, 1 Jun 2006 20:45:48 +0000 (GMT) (envelope-from bcook@poklib.org) Received: from [192.168.1.249] (helo=mail.poklib.org) by c.mx.poklib.org with esmtps (TLSv1:AES256-SHA:256) (Exim 4.60; FreeBSD) (envelope-from ) id 1Flu3A-0001Me-B8 for freebsd-questions@freebsd.org ; Thu, 01 Jun 2006 16:45:48 -0400 Received: from [192.168.1.218] by mail.poklib.org with esmtp (Exim 4.60; FreeBSD) (envelope-from ) id 1Flu39-000OWG-Ov for freebsd-questions@freebsd.org ; Thu, 01 Jun 2006 16:45:47 -0400 Message-ID: <447F51FB.4060403@poklib.org> Date: Thu, 01 Jun 2006 16:45:47 -0400 From: "B. Cook" Organization: Network Administrator - Adriance Memorial Library User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-RcvHost: [192.168.1.218] X-RcvFor: X-Auth-Id: X-AntiVirus: No Virus Found X-MIME-Character-set: ISO-8859-1 Subject: Shared Memory? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:46:11 -0000 Hello All, I'm not a programmer and nor do I play one in real life.. :) I've recently setup a DansGuardian box for someone and I had some interesting things happen. When the box would get under load (500+ simultaneout connections) it would load up the cpu: last pid: 69931; load averages: 4.73, 3.56, 3.32 up 5+11:10:58 09:56:31 49 processes: 8 running, 41 sleeping Mem: 157M Active, 202M Inact, 106M Wired, 20M Cache, 60M Buf, 8168K Free Swap: 2048M Total, 32K Used, 2048M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 49814 guardian 1 120 0 85868K 85160K RUN 0:01 14.87% dansguardian 30132 guardian 1 120 0 85868K 85180K RUN 0:22 14.11% dansguardian 52245 guardian 1 119 0 85860K 85168K RUN 0:06 13.94% dansguardian 23445 guardian 1 120 0 85896K 85208K RUN 0:22 13.87% dansguardian at this time there were 10 dansguardian processes running. the default config suggests 120 to start off with.. (doing that crashed the box in about 5 minutes) I found one thing that seemed to help: kern.ipc.shm_use_phys=1 from man tuning. after setting the sysctl value the system now looks like this: last pid: 40265; load averages: 0.29, 0.29, 0.27 up 7+17:55:46 16:41:47 34 processes: 1 running, 33 sleeping CPU states: 0.0% user, 0.0% nice, 0.7% system, 1.5% interrupt, 97.8% idle Mem: 125M Active, 249M Inact, 98M Wired, 16M Cache, 60M Buf, 4392K Free Swap: 2048M Total, 36K Used, 2048M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 6266 guardian 1 96 0 76116K 18004K select 0:05 12.54% dansguardian 696 guardian 1 96 0 76112K 16960K select 0:01 0.81% dansguardian 8969 guardian 1 96 0 76112K 6036K select 0:00 0.12% dansguardian 21017 squid 1 96 0 31228K 26684K select 41:52 0.00% squid After searching I can't seem to find out when it's appropriate (or not) to set this and if anything else should be set in conjunction with it. Other than the fact that this helped.. can anyone point me in a direction or tell me why it helped? collecting pv entries -- suggest increasing PMAP_SHPGPERPROC collecting pv entries -- suggest increasing PMAP_SHPGPERPROC this error is what somewhat lead me to this discovery. And in hoping to fix that it suggested recompling the kernel with those values changed.. NOTES tells me that that value is now 201, google has people with numbers all over the place.. and I still can't seem to figure out why they did it. egrep -v "#" /etc/sysctl.conf security.bsd.see_other_uids=0 net.inet.ip.forwarding=1 net.inet.ip.random_id=1 kern.randompid=10000 kern.coredump=0 kern.ipc.shmmax=536870912 kern.ipc.shm_use_phys=1 This is a stock 6.1 GENERIC kernel The box is a router for internet traffic that passes several gigs of data from about 2500+ users. Its a small 866 w/ 512M of ram and as previously stated running DansGuardian (www/dansguardian) and squid (www/squid). I've asked a few times for information on the DG list, but I guess it's mainly a linux only crowd as I did not hear anything back from anyone. netstat -m 260/2155/2415 mbufs in use (current/cache/total) 258/1264/1522/17088 mbuf clusters in use (current/cache/total/max) 258/1210 mbuf+clusters out of packet secondary zone in use (current/cache) 0/0/0/0 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/0 9k jumbo clusters in use (current/cache/total/max) 0/0/0/0 16k jumbo clusters in use (current/cache/total/max) 581K/3066K/3647K bytes allocated to network (current/cache/total) 56061/494261/470674 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/9/4528 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 12 requests for I/O initiated by sendfile 328 calls to protocol drain routines They want me to move it a larger box just for the sake of putting it on a larger box.. (2.2G Xeon w/ 2G ram) but I'd like to tune it better.. as opposed to just throw hardware at it and hope for the best. all data/packets passes over lo.. lo0 16384 127 127.0.0.1 57055828 - 33798613 - - and the box so far has been up for 7 days. Any information helping me understand this beast would be greatly appreciated. - Brian From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:54:46 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5AEBC16B921 for ; Thu, 1 Jun 2006 20:54:46 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 28E1743D5E for ; Thu, 1 Jun 2006 20:54:34 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 24372 invoked from network); 1 Jun 2006 20:54:33 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 20:54:33 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 03ED128449; Thu, 1 Jun 2006 16:54:33 -0400 (EDT) To: Subhro References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> From: Lowell Gilbert Date: Thu, 01 Jun 2006 16:54:32 -0400 In-Reply-To: (Subhro's message of "Thu, 1 Jun 2006 19:55:54 +0530") Message-ID: <44u074egvr.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-openoffice@freebsd.org, Lowell Gilbert , freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:54:47 -0000 Subhro writes: > On 6/1/06, Lowell Gilbert wrote: >> Andrea Venturoli writes: >> >> > I reported it several months ago and all I got to be told was that >> > it's a strange problem. >> >> Well, that's true... >> >> Do you have devel/epm installed by any chance? > > No I do not have epm installed. Should I install it and try again? No. If you had it, I would recommend removing it before trying again. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:55:54 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 145B816BDA9 for ; Thu, 1 Jun 2006 20:55:54 +0000 (UTC) (envelope-from nocturnal@swehack.se) Received: from mail2.swebase.com (mail2.swebase.com [82.99.44.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id 217A543D6D for ; Thu, 1 Jun 2006 20:55:47 +0000 (GMT) (envelope-from nocturnal@swehack.se) Received: from [81.170.248.62] by mail2.swebase.com (MDaemon.PRO.v8.1.0.R) with ESMTP id 61-md50000034264.msg for ; Thu, 01 Jun 2006 22:53:58 +0200 Message-ID: <447F53EA.1000300@swehack.se> Date: Thu, 01 Jun 2006 22:54:02 +0200 From: nocturnal User-Agent: Thunderbird 1.5 (X11/20060409) MIME-Version: 1.0 To: Nikos Vassiliadis References: <447DF7B5.6090507@swehack.se> <44ejy9rpbo.fsf@be-well.ilk.org> <447EEBE5.80905@swehack.se> <200606011658.14160.nvass@teledomenet.gr> In-Reply-To: <200606011658.14160.nvass@teledomenet.gr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit X-Authenticated-Sender: nocturnal@swehack.se X-MDRemoteIP: 81.170.248.62 X-Return-Path: nocturnal@swehack.se X-MDaemon-Deliver-To: freebsd-questions@freebsd.org X-Spam-Checker-Version: SpamAssassin 3.0.4 (2005-06-05) on mail2 X-Spam-Status: No, score=0.9 required=5.0 tests=PLING_QUERY autolearn=disabled version=3.0.4 X-Spam-Level: X-Spam-Processed: mail2.swebase.com, Thu, 01 Jun 2006 22:53:59 +0200 Cc: freebsd-questions@freebsd.org Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:56:03 -0000 Hi Not sure how to answer your question but the network dies in a way that i can't send any packets out or recive any packets in. What usually helps is to run dhclient fxp0 on my card again. My friend said he used to bring the card down and then up again and it would solve the issue. Med vänliga hälsningar Stefan Midjich aka nocturnal [Swehack] http://swehack.se Nikos Vassiliadis wrote: > On Thursday 01 June 2006 16:30, nocturnal wrote: >> Hi >> >> One thing i should have mentioned is that this only happens with >> rtorrent. For example i can transfer in 10Mbit+(not much plus) from >> work, where i have no bandwidth restriction, for hours without problems. >> Using scp, i have not tried with ftp and very large files. When i >> transfer large files from work with scp i can maintain a speed of >> 10Mbit+ for long periods of times without problems. This problem has >> only happened because of rtorrent using a lot of bandwidth. And as i >> said earlier it happens when using less bandwidth to. > > Is you computer behing a dsl modem/router which does NAT? > Sometimes modem/routers cannot handle the number of connections > torrents do and die. And most of the time you cannot have a clue, everything > will look normal, but it won't do NAT. > > Also, what do mean when you say "net dies"? Do you mean internet dies > or your LAN dies? > >> >> >> Med vänliga hälsningar >> >> Stefan Midjich aka nocturnal >> [Swehack] http://swehack.se >> >> Lowell Gilbert wrote: >>> nocturnal writes: >>>> Not sure if this is already posted or already reported as a bug >>>> because i honestly don't have time for those things. >>>> >>>> I have reproduced this problem a few times but it has some special >>>> requirements. For example i download a torrent from a very fast peer >>>> in the rtorrent client. I have reproduced this with both rTorrent >>>> 0.4.5 - >>>> libTorrent 0.8.5 and two earlier versions which i don't remember. My >>>> friend is using the same versions as i am now and reported no problems >>>> in the latest development versions, he only started using them >>>> today. I have a 10/10Mbit connection at home and this happens when >>>> rtorrent is downloading at max speed. It varies somewhere around >>>> 7-10Mbit but never over 10Mbit by much. My friend only has a capacity >>>> of 1Mbit but got the same problem. >>>> >>>> This is why i'm reporting this because if it turns out that this can >>>> be reproduced by sending speciall crafted packets or packets in a >>>> special order then i guess it's pretty serious. I highly doubt this >>>> but still, a user process should not kill the net like rtorrent has >>>> done. >>>> >>>> Both me and my friend were running FreeBSD 6.0 RELEASE when this >>>> happened. >>>> >>>> I was not going to report this but a friend just told me he gets the >>>> exact same results on FreeBSD 6.0 so i felt i should tell someone. >>> Do you have good NICs? >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:57:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5D4DD16BC65 for ; Thu, 1 Jun 2006 20:57:49 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail4.sea5.speakeasy.net (mail4.sea5.speakeasy.net [69.17.117.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id B349843D7D for ; Thu, 1 Jun 2006 20:57:33 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 2869 invoked from network); 1 Jun 2006 20:57:33 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail4.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 20:57:33 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id E899D28449; Thu, 1 Jun 2006 16:57:32 -0400 (EDT) To: Subhro References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> From: Lowell Gilbert Date: Thu, 01 Jun 2006 16:57:32 -0400 In-Reply-To: (Subhro's message of "Thu, 1 Jun 2006 19:55:54 +0530") Message-ID: <44lksgegqr.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-openoffice@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:57:57 -0000 The net thing to do would presumably be to look at the log file referenced in the error message included in your original posting. From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 20:59:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E24A916C099 for ; Thu, 1 Jun 2006 20:59:27 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 193B243D69 for ; Thu, 1 Jun 2006 20:59:25 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 11640 invoked from network); 1 Jun 2006 20:59:24 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 20:59:24 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 260FA28449; Thu, 1 Jun 2006 16:59:24 -0400 (EDT) To: nocturnal References: <447DF7B5.6090507@swehack.se> <44ejy9rpbo.fsf@be-well.ilk.org> <447EEBE5.80905@swehack.se> <200606011658.14160.nvass@teledomenet.gr> <447F53EA.1000300@swehack.se> From: Lowell Gilbert Date: Thu, 01 Jun 2006 16:59:24 -0400 In-Reply-To: <447F53EA.1000300@swehack.se> (nocturnal@swehack.se's message of "Thu, 01 Jun 2006 22:54:02 +0200") Message-ID: <44hd34egnn.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 20:59:44 -0000 Don't top-post, please. nocturnal writes: > Not sure how to answer your question but the network dies in a way > that i can't send any packets out or recive any packets in. What > usually helps is to run dhclient fxp0 on my card again. My friend said > he used to bring the card down and then up again and it would solve > the issue. And when it's in the failed state, what does ifconfig(8) show? From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 21:00:56 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9B1CE16B7E0 for ; Thu, 1 Jun 2006 21:00:56 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail2.sea5.speakeasy.net (mail2.sea5.speakeasy.net [69.17.117.4]) by mx1.FreeBSD.org (Postfix) with ESMTP id 41F7343D4C for ; Thu, 1 Jun 2006 21:00:38 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 28818 invoked from network); 1 Jun 2006 21:00:37 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail2.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 1 Jun 2006 21:00:37 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id 6F83A2844A; Thu, 1 Jun 2006 17:00:37 -0400 (EDT) To: Subhro , freebsd-openoffice@freebsd.org, freebsd-questions@freebsd.org References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> <44lksgegqr.fsf@be-well.ilk.org> From: Lowell Gilbert Date: Thu, 01 Jun 2006 17:00:37 -0400 In-Reply-To: <44lksgegqr.fsf@be-well.ilk.org> (Lowell Gilbert's message of "Thu, 01 Jun 2006 16:57:32 -0400") Message-ID: <44d5dseglm.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 21:01:03 -0000 Lowell Gilbert writes: > The net thing to do would presumably be to look at the log file > referenced in the error message included in your original posting. Um, "next" thing to do... [Sorry.] From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 21:08:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BA0AB16BD20 for ; Thu, 1 Jun 2006 21:08:25 +0000 (UTC) (envelope-from don.hinton@vanderbilt.edu) Received: from mailgate02.smtp.vanderbilt.edu (mailgate02.smtp.Vanderbilt.Edu [129.59.1.72]) by mx1.FreeBSD.org (Postfix) with ESMTP id D865343D5A for ; Thu, 1 Jun 2006 21:08:16 +0000 (GMT) (envelope-from don.hinton@vanderbilt.edu) Received: from smtp09.smtp.vanderbilt.edu (smtp09.smtp.Vanderbilt.Edu [129.59.1.239]) by mailgate02.smtp.vanderbilt.edu (8.13.6/8.13.6) with ESMTP id k51L8FeE032482 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Thu, 1 Jun 2006 16:08:15 -0500 Received: from smtp09.smtp.vanderbilt.edu (localhost [127.0.0.1]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9C+d3.7.9) with ESMTP id k51L8F2t002988; Thu, 1 Jun 2006 16:08:15 -0500 (CDT) Received: from a129103.n1.vanderbilt.edu (A129103.N1.Vanderbilt.Edu [129.59.129.103]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9.3B+d3.7.9) with ESMTP id k51L8FlS002985 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 1 Jun 2006 16:08:15 -0500 (CDT) From: Don Hinton Organization: ISIS To: freebsd-questions@freebsd.org Date: Thu, 1 Jun 2006 16:08:14 -0500 User-Agent: KMail/1.9.1 References: <000801c68312$4d2e5590$0201a8c0@AMD1700> <447F6FBF.5070503@gmail.com> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606011608.14921.don.hinton@vanderbilt.edu> X-Proofpoint-Virus-Version: vendor=fsecure engine=4.64.4171:2.3.9, 1.2.33, 4.0.164 definitions=2006-06-01_02:2006-05-31, 2006-06-01, 2006-06-01 signatures=0 X-PPS: No, score=0 Cc: Atanas Atanasov Subject: Re: Problem with wireless card drivers X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 21:08:34 -0000 On Thursday 01 June 2006 15:03, Atanas Atanasov wrote: > Are you sure one should use ndiscvt? I mean i tried it the same except > for getting pccarddefs.h (which as they say will be used in eventual > kernel compiles) and for synchronising the source which I cannot do > because no network is available. I have wireless only connection. > > Most people say that ndisgen is the "better" method as from 6.0. > Actually it seems due to unknown reasons the old method is not > supported anymore. I have an hp nx9600 with a similar (or same) card, and ndisgen worked fine. I didn't modify rc.conf, but instead use kldload to load the module when I need it. Here's what I do: # kldunload /root/bcmwl5_sys.ko #dmesg ... ndis0: mem 0xc8206000-0xc8207fff irq 17 at device 3.0 on pci11 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:90:4b:af:7f:68 What does dmesg tell you when you try to load the module? hth... don > > Atanas > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" -- Don Hinton tel: 615.480.5667 ISIS, Vanderbilt University skype: donhinton http://people.vanderbilt.edu/~don.hinton/ From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 22:09:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E82B216C3BD for ; Thu, 1 Jun 2006 22:09:24 +0000 (UTC) (envelope-from drew@mykitchentable.net) Received: from relay01.roc.ny.frontiernet.net (relay01.roc.ny.frontiernet.net [66.133.182.164]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8DFF443D45 for ; Thu, 1 Jun 2006 22:09:24 +0000 (GMT) (envelope-from drew@mykitchentable.net) Received: from blacklamb.mykitchentable.net (67-51-113-117.dsl1.elk.ca.frontiernet.net [67.51.113.117]) by relay01.roc.ny.frontiernet.net (Postfix) with ESMTP id 8533136429D; Thu, 1 Jun 2006 22:09:22 +0000 (UTC) Received: from [192.168.25.6] (unknown [192.168.25.6]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by blacklamb.mykitchentable.net (Postfix) with ESMTP id 6308F1648E6; Thu, 1 Jun 2006 15:09:21 -0700 (PDT) Message-ID: <447F6590.9070000@mykitchentable.net> Date: Thu, 01 Jun 2006 15:09:20 -0700 From: Drew Tomlinson User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Toni Schmidbauer References: <447C6CF9.4070201@mykitchentable.net> <86u07731hq.wl%toni@stderror.at> In-Reply-To: <86u07731hq.wl%toni@stderror.at> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new-2.3.2 (20050629) at filter11.roc.ny.frontiernet.net Cc: FreeBSD Questions Subject: Re: ipfw Kernel Module - Default to Accept? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 22:09:40 -0000 On 5/30/2006 9:45 AM Toni Schmidbauer wrote: > At Tue, 30 May 2006 09:04:09 -0700, > Drew Tomlinson wrote: > >> I'm using FBSD 6.1. When using the ipfw kernel module, is it possible >> to get ipfw loaded in a "default to accept" mode? I've seen the >> kernel option to enable this when compiling statically but nothing >> specific to the kernel module. Maybe there's a way to compile the >> kernel module with some entry in /etc/make.conf? I've Googled but >> have not been able to turn up anything. >> > > you can recompile the module, uncomment the line > > #CFLAGS+= -DIPFIREWALL_DEFAULT_TO_ACCEPT > > in /usr/src/sys/modules/ipfw/Makefile. next call make in the same > directory and copy the compiled module to /boot/kernel. i've done that > in the past, works like a charm. > Thank you. I'll try it. Drew -- Be a Great Magician! Visit The Alchemist's Warehouse http://www.alchemistswarehouse.com From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 23:32:44 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F1E1E16AC1A for ; Thu, 1 Jun 2006 23:32:43 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4101B43D45 for ; Thu, 1 Jun 2006 23:32:42 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k51NWNx31300; Thu, 1 Jun 2006 16:32:23 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Heinrich Rebehn" , Date: Thu, 1 Jun 2006 16:32:22 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060601133823.1743.qmail@web33311.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 23:32:53 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Danial Thom >Sent: Thursday, June 01, 2006 6:38 AM >To: Heinrich Rebehn; questions@freebsd.org >Subject: Re: Recommendation for 1000BASE-SX card? > > > > >--- Heinrich Rebehn >wrote: > >> Danial Thom wrote: >> > The intel cards that use the EM driver are >> the >> > best performing cards in FreeBSD that we've >> > tested. We've test cards made by the same >> company >> > that use the broadcom controllers and the >> intel >> > cards are substantially better (ie use less >> CPU >> > passing the same amount of traffic). >> > >> > Be careful using on-board controllers. >> Usually >> > vendors, for some reason, don't wire them to >> the >> > pci-x bus. Most supermicro boards wire the em >> > controllers to the 32bit/33mhz bus and the >> tyan >> > and supermicro opteron boards we've tested >> wire >> > the broadcoms to a shared 1x PCI-E, both of >> which >> > will not only give you poor performance, but >> are >> > not capable of running full gigabit rates. >> > >> > DT >> > >> >> The Intel card would be an INTEL Pro1000MF, >> right? This would be quite >> expensive (~ EUR 430), but good performance and >> stability would warrant >> that. >> ATM, we are using the onboard controller >> (Broadcom BCM5704C wired to the >> pci-x bus). I did not have opportunity to do >> performance measurements, >> but we do have problems with our Linkpro >> 1000SX/1000TX converters, the >> 3rd of which has already died. >> That's why i want to give a PCI-X card with >> fiber interface a try. > >No, that would be the 1000MT, the MF is a fiber >card I believe. They are about US$120. in the US. > >How do you know its wired to the PCI-X bus, since >I don't believe that the controller has a way of >reporting the way that the intel controller does? >What MB do you have? > >Also keep in mind that the bge driver is a piece >of crap; driver quality is a much more telling >factor in these free OS's than the card in many >cases. The EM and FXP are the only drivers worth >anything (mainly because neither were written by >mass-driver mill man Bill Paul). > After having fixed bugs in the bge driver I must stress how wrong this statement is for the bge driver. Bill Paul may or may not have been associated with the bge driver, whether he was or not is immaterial since the bge driver is basically a port of the broadcom-supplied Linux driver, the code is Broadcoms mostly, with hunks of Broadcom code removed (like that dealing with the PHY's) when it was too difficult to port. (apparently) The quality of the Broadcom driver isn't Bill Paul's, it's Broadcoms. No, I can assure you that the reason the Broadcom chips work like crap under FreeBSD is not due to Bill Paul, it is because the Broadcom hardware iteself is pure, unadulterated, stinking, bull crap. It is crappy even under the supported operating systems like Windows, it's craptitude reaches new heights on the crap pile. Broadcom missed their calling as an ethernet chipset designer, they should have gone into making vacuum cleaners, as they would certainly be the suckiest ones in that business. Ted From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 23:36:48 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EBFF216B420 for ; Thu, 1 Jun 2006 23:36:48 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id D881A43D66 for ; Thu, 1 Jun 2006 23:36:44 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 1800 invoked from network); 2 Jun 2006 09:36:44 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 2 Jun 2006 09:36:44 +1000 Date: Fri, 2 Jun 2006 09:36:40 +1000 From: Norberto Meijome To: "Michal F. Hanula" Message-ID: <20060602093640.6f87db88@localhost> In-Reply-To: <20060601150800.GA51994@roo.7f000001.org> References: <20060531135059.4d725849@localhost> <20060601150800.GA51994@roo.7f000001.org> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: questions@freebsd.org Subject: Re: Morse + Thinklight is fun... but how do I stop it? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 23:36:51 -0000 On Thu, 1 Jun 2006 17:08:00 +0200 "Michal F. Hanula" wrote: > Tried it, had the same problem. > echo 0 > /dev/led/thinklight doh! :) thanks , i tried /dev/null but not 0. doh! cheers, Beto From owner-freebsd-questions@FreeBSD.ORG Thu Jun 1 23:39:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E60B916B866 for ; Thu, 1 Jun 2006 23:39:26 +0000 (UTC) (envelope-from freebsd@meijome.net) Received: from sigma.octantis.com.au (ns2.octantis.com.au [207.44.189.124]) by mx1.FreeBSD.org (Postfix) with ESMTP id 695B643D46 for ; Thu, 1 Jun 2006 23:39:26 +0000 (GMT) (envelope-from freebsd@meijome.net) Received: (qmail 1907 invoked from network); 2 Jun 2006 09:39:25 +1000 Received: from 210-84-41-231.dyn.iinet.net.au (HELO localhost) (210.84.41.231) by sigma.octantis.com.au with (DHE-RSA-AES256-SHA encrypted) SMTP; 2 Jun 2006 09:39:25 +1000 Date: Fri, 2 Jun 2006 09:39:21 +1000 From: Norberto Meijome To: "Atom Powers" Message-ID: <20060602093921.58fe20f7@localhost> In-Reply-To: References: <447EAE41.9090005@esiee.fr> <20060601231922.092460ea@localhost> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: Frank Bonnet , freebsd-questions@freebsd.org Subject: Re: system load mrtg ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Jun 2006 23:39:37 -0000 On Thu, 1 Jun 2006 11:21:35 -0700 "Atom Powers" wrote: > On 6/1/06, Norberto Meijome wrote: > > On Thu, 01 Jun 2006 11:07:13 +0200 > > Frank Bonnet wrote: > > > > > Hello > > > > > > I'm searching for some tools that are able to produce > > > some graphics ( understandables by managers ...) to > > > show the system load ( CPU . DISK I/O , memory ... etc etc ) > > > > > > > http://www.cacti.net/ > > > > Seconded. > I used cricket (an mrtg clone) for a long time. But cacti makes > setting up the hosts and graphs so much easier. (Although I still have > to figure out how to create custom data sources...) > they are not that hard to create - you need something that returns a series of values (as many as defined in your data source in cacti) and then feed that into the processor. I remember that the tricky bit was understanding how all the custom Cacti components plugged into cacti (i.e, custom data source, custom this and that ), rather than the feed of the data itself. I'll see if I can dig up some sample if you need me to. Regards, Beto From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 00:01:26 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7834616A4F6 for ; Fri, 2 Jun 2006 00:01:26 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8C22B43D6E for ; Fri, 2 Jun 2006 00:01:18 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k52018x31510; Thu, 1 Jun 2006 17:01:09 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Chuck Swiger" , Date: Thu, 1 Jun 2006 17:01:08 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <447F069C.4000002@mac.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: questions@freebsd.org Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 00:01:30 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Chuck Swiger >Sent: Thursday, June 01, 2006 8:24 AM >To: danial_thom@yahoo.com >Cc: questions@freebsd.org >Subject: Re: Recommendation for 1000BASE-SX card? > > >Very well, let me put it another way: if your opinions about >what's wrong >differ from most other people, you might do better to rely on a >discussion >involving facts rather than opinions. Or, it could simply be that he's not doing what most people are doing, so he is going to run into trouble that most people don't run into. >I mention this because >some people >regard their own opinions so highly that they don't seem to be >aware that >other approaches exist and might even prove effective. > Like you? >> Clearly there are drivers that are well >> supported and drivers that aren't. There are >> people out there trying to run their businesses >> and you seem to want to pretend that everything >> is just peachy and that everything can be tweaked >> and tuned a bit to be usable. > >I don't know about either the OP or your situation(s), Then, pray tell, don't comment. Instead thank your lucky stars that you have not had to deal with that kind of problem. > but I'm >generally of >the opinion that FreeBSD works just fine, most of the time, on >most hardware, >without any specific tweaking or tuning to be entirely usable. > It does not. In reality, current versions of FreeBSD work better on current versions of hardware. FreeBSD has a terrible history of breaking things that used to work on old hardware, then when someone complains that something is broken, the developers in effect tell them their old hardware is crappy junk and to buy new hardware. Try running FreeBSD 6.X on a 80486 or Pentium system. FreeBSD 4.11 runs just fine on that hardware, if a bit slowly. But, I don't need speed to control my garden sprinklers. Now, it is true that sometimes backwards compatibility can hurt you, it can cause you to maintain interfaces and structures that conflict with support of new hardware, it can sometimes put you into situations that cannot be automatically resolved, thus you have to create a knob for the user to twaddle one way or another, depending on what hardware they have or what they want to do. It can suck off developer time to maintain old junk that only a few people use, instead of putting in support for new crap that a lot of people use. So there is a balance beam of too much backwards compatability and not enough of it. Microsoft is most definitely way far on the side of bending over backwards to support everything, but most people don't realize that FreeBSD is way far on the other side of sacrificing hardware support at the drop of a hat when people lose interest in it. >That's true of some other platforms, such as Apple hardware and >MacOS X, or >even Sun/SPARC boxes, as well. YMMV. > Total apples and oranges comparison, not relevant to anything. >If you have specific problems or a FreeBSD-driver to Windows-driver >performance comparison, providing #'s and enough details to >reproduce would be >helpful. That has been done with the Broadcom driver exhaustively in the PR database, there's at least a dozen PRs on problems related to that chip. However it has not resulted in much code to fix the problem, or even interest among committers to apply the fixes that have been posted. So no, I don't think that doing that is helpful at all. In fact, I really think the PR system has gotten pretty much broken these days, there's too many bugs and not enough people working on them, and more coming in every day. What is needed is some developers putting some time into knocking down the bugs in the PR database, but instead we have the foundation dumping money into funding students on projects like "The Summer of Code" which basically ends up creating a lot of half-finished efforts that may or may not eventually get integrated into the operating system at some point down the road. Nobody wants to fix other people's bugs, that's boring stuff, that is the one area of Open Source where commercial software companies have a leg up over us. A commercial company can find some starving programmer and pay him, then put a manager over him to keep jerking the paycheck string to keep him on task to do the icky programming. Open Source has real difficulty with the concept that some things in it are broken, rather ickely broken, and totally un-fun to work on, and the only way your going to get them fixed is by whipping some slave until they do the filthy task. People would rather spend the gold that they have on nice, pleasant projects that treat everyone nicely and look good on Resumes, and are not icky, nasty, uncomfortable things to do that make you late for dinner. Ted From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 00:03:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EE87516ACBB for ; Fri, 2 Jun 2006 00:03:42 +0000 (UTC) (envelope-from linuxbsdunix@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.197]) by mx1.FreeBSD.org (Postfix) with ESMTP id 97ADF43D5C for ; Fri, 2 Jun 2006 00:03:41 +0000 (GMT) (envelope-from linuxbsdunix@gmail.com) Received: by wx-out-0102.google.com with SMTP id i31so287177wxd for ; Thu, 01 Jun 2006 17:03:41 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=bsZ292NjD1JWs32TCvnMQlQpejWhCMLZbbnJOSXqFSMQ+VHu2G1Jp8o8ombD9TPiRsfdzMIoE+sW2T9AEBXuVGQ4c0oj2A+ydTpvLXmU+PcD9XmZYDwIQff9vsnbAxTC3z4ifykJD9BrsYSuiRsHxWYiFfRfNgGxs2yM51JfNCY= Received: by 10.70.116.8 with SMTP id o8mr1599684wxc; Thu, 01 Jun 2006 17:03:41 -0700 (PDT) Received: by 10.70.63.6 with HTTP; Thu, 1 Jun 2006 17:03:41 -0700 (PDT) Message-ID: <48269bf80606011703g1c4482dau94d3e2539aeb90a@mail.gmail.com> Date: Thu, 1 Jun 2006 20:03:41 -0400 From: "Adam M" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Adding as a second hard drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 00:03:47 -0000 Yes, I was wondering what the best way was to add a second hard drive to my existing FreeBSD system, I searched the Handbook, but cannot find it. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 00:05:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A948116ABE1 for ; Fri, 2 Jun 2006 00:05:22 +0000 (UTC) (envelope-from katsuo_harada_evil_does@hotmail.com) Received: from hotmail.com (bay105-f34.bay105.hotmail.com [65.54.224.44]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5C03F43D64 for ; Fri, 2 Jun 2006 00:05:20 +0000 (GMT) (envelope-from katsuo_harada_evil_does@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 1 Jun 2006 17:05:20 -0700 Message-ID: Received: from 65.54.224.200 by by105fd.bay105.hotmail.msn.com with HTTP; Fri, 02 Jun 2006 00:05:15 GMT X-Originating-IP: [86.200.121.163] X-Originating-Email: [katsuo_harada_evil_does@hotmail.com] X-Sender: katsuo_harada_evil_does@hotmail.com From: "Vitaly D" To: freebsd-questions@freebsd.org Date: Fri, 02 Jun 2006 02:05:15 +0200 Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; format=flowed X-OriginalArrivalTime: 02 Jun 2006 00:05:20.0315 (UTC) FILETIME=[3C9F70B0:01C685D8] Subject: compiling problem against libc_r X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 00:05:25 -0000 Hello i have a reccurent problem while compiling the software originally written for Linux it is often compiled agains pthread library, but in freebsd such a library is called libc_r (i'm using 4.11 RELEASE) so i often adjust configure options with LIBS=-lc_r option but here comes the problem when calling libtool such as following /bin/sh ../libtool --tag=CC --mode=link gcc -g -02 [snip] -lc_r option is present but when immideatly after the effective command is called like gcc -g -02 the -lc_r option is systematically absent!!!!! i've tried to mannually adjust makefile by placing -lc_r option even in CC flag CC= gcc -lc_r but it didn't solve my problem please can you help me. how should i proceed to compile against libc_r ???? cause LIBS=-lc_r doesn't seems to work. it's really boring to execute gcc lines by hand :( HEEELP!!! i'm tired -- Best Regards Vitaly katsuo_harada_evil_does [at] hotmail [dot] com Marseille Nice _________________________________________________________________ MSN Hotmail sur i-mode™ : envoyez et recevez des e-mails depuis votre téléphone portable ! http://www.msn.fr/hotmailimode/ From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 00:09:18 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB2E916AAA0 for ; Fri, 2 Jun 2006 00:09:18 +0000 (UTC) (envelope-from derek@computinginnovations.com) Received: from betty.computinginnovations.com (dsl081-142-072.chi1.dsl.speakeasy.net [64.81.142.72]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0B53843D45 for ; Fri, 2 Jun 2006 00:09:13 +0000 (GMT) (envelope-from derek@computinginnovations.com) Received: from p17.computinginnovations.com (dhcp-10-20-30-100.computinginnovations.com [10.20.30.100]) (authenticated bits=0) by betty.computinginnovations.com (8.13.6/8.12.11) with ESMTP id k5208rF8068192; Thu, 1 Jun 2006 19:08:53 -0500 (CDT) Message-Id: <6.0.0.22.2.20060601190450.026bb440@mail.computinginnovations.com> X-Sender: derek@mail.computinginnovations.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Thu, 01 Jun 2006 19:08:43 -0500 To: "Adam M" , freebsd-questions@freebsd.org From: Derek Ragona In-Reply-To: <48269bf80606011703g1c4482dau94d3e2539aeb90a@mail.gmail.com > References: <48269bf80606011703g1c4482dau94d3e2539aeb90a@mail.gmail.com> Mime-Version: 1.0 X-ComputingInnovations-MailScanner-Information: Please contact the ISP for more information X-ComputingInnovations-MailScanner: Found to be clean X-ComputingInnovations-MailScanner-From: derek@computinginnovations.com X-Spam-Status: No Content-Type: text/plain; charset="us-ascii"; format=flowed X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: Subject: Re: Adding as a second hard drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 00:09:19 -0000 You need to tell us what version of FreeBSD you are running. You will need to add the drive physically. You need to choose how the drive will be used: single filesystem or multiple filesystems. What mount points will you use for these file systems. In general you will need to partition the new drive drive, then run newfs on the new partitions to create the file systems. Once the filesystems are created you will need to edit /etc/fstab to set the mounting of these filesystems. I would recommend you reboot to test the setup of the new mounts. -Derek At 07:03 PM 6/1/2006, Adam M wrote: >Yes, I was wondering what the best way was to add a second hard drive to my >existing FreeBSD system, I searched the Handbook, but cannot find it. >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >-- >This message has been scanned for viruses and >dangerous content by MailScanner, and is >believed to be clean. >MailScanner thanks transtec Computers for their support. > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 00:56:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E231416A7C3 for ; Fri, 2 Jun 2006 00:56:14 +0000 (UTC) (envelope-from iaccounts@ibctech.ca) Received: from pearl.ibctech.ca (pearl.ibctech.ca [209.167.58.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id DDBF843D4C for ; Fri, 2 Jun 2006 00:56:13 +0000 (GMT) (envelope-from iaccounts@ibctech.ca) Received: (qmail 61940 invoked by uid 1002); 2 Jun 2006 00:56:11 -0000 Received: from iaccounts@ibctech.ca by pearl.ibctech.ca by uid 89 with qmail-scanner-1.22 (spamassassin: 2.64. Clear:RC:1(209.167.16.15):. Processed in 2.661729 secs); 02 Jun 2006 00:56:11 -0000 Received: from unknown (HELO xzibit) (209.167.16.15) by pearl.ibctech.ca with (RC4-MD5 encrypted) SMTP; 2 Jun 2006 00:56:08 -0000 From: "Steve Bertrand" To: "'Malcolm Fitzgerald'" Date: Thu, 1 Jun 2006 20:54:21 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 In-Reply-To: <192c377948a2a44244956738249837e4@pacific.net.au> Thread-Index: AcaFNGGqbifredZPQiikeUwMEn8tLwAqjvDw X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Qmail-Scanner-Message-ID: <114920976867561934@pearl.ibctech.ca> Message-Id: <20060602005613.DDBF843D4C@mx1.FreeBSD.org> Cc: "'freebsd-questions@FreeBSD.ORG'" Subject: RE: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 00:56:20 -0000 > > Take a look at the 'ServerName' directive in your > httpd.conf file. Try > > uncommenting said directive, and put your IP address beside it. > > This line is already in place > > ServerName 127.0.0.1:80 What about something like: ServerName 192.168.1.10:80 ...or whatever your LAN/WAN IP is? Does that help? Try removing the localhost addr from there and replacing it with a NIC IP and see what happens. I have to admit, I haven't followed the entire thread, so if this has been mentioned, I apologize in advance. Steve From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 01:12:26 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C859616BACA for ; Fri, 2 Jun 2006 01:12:21 +0000 (UTC) (envelope-from jhorne@dfwlp.com) Received: from zeus.int.dfwlp.com (zeus.dfwlp.com [208.11.134.127]) by mx1.FreeBSD.org (Postfix) with ESMTP id C9C1343E13 for ; Fri, 2 Jun 2006 01:11:42 +0000 (GMT) (envelope-from jhorne@dfwlp.com) Received: from hera.int.dfwlp.com (hera.int.dfwlp.com [192.168.125.82]) (authenticated bits=0) by zeus.int.dfwlp.com (8.13.6/8.13.6) with ESMTP id k521BcQj074047 for ; Thu, 1 Jun 2006 20:11:38 -0500 (CDT) (envelope-from jhorne@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Thu, 1 Jun 2006 20:11:38 -0500 User-Agent: KMail/1.9.1 References: <200605312116.39802.jhorne@dfwlp.com> <200606010228.k512SlPU084575@banyan.cs.ait.ac.th> In-Reply-To: <200606010228.k512SlPU084575@banyan.cs.ait.ac.th> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606012011.38323.jhorne@dfwlp.com> X-Spam-Status: No, score=-1.4 required=5.0 tests=ALL_TRUSTED autolearn=failed version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on zeus.int.dfwlp.com Subject: Re: system recovery X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 01:12:37 -0000 On Wednesday 31 May 2006 21:28, Olivier Nicole wrote: > > or, can someone recommend how i might use that tarball of my entire > > system to quickly get a new system up and running (all this with the > > assumtion that i have not changed any hardware configurations). if > > someone has time to answer quickly, i would sure appreciate it. > > I think that the recovery system that lies on one of the CDs has > tar. You could boot the recovery system and untar the things. > > Olivier > _______________________________________________ well, i sucessfully recovered my system, back just as it was before my tinkering got out of control. here was my (probably quite unorthodox) method: 1) mount my external drive that contained my system tarball. untar the entire backup of the old system 2) rm -rf /boot, and replace it with my old (which had my recompiled kernel) 3) cd to usr, then cp -vpnRP src obj /usr. (this recovered my most recently built world) 4) reboot to single, do my mergematers and install world, reboot back to normal again. 5) enter the directory that holds my untarred system backup. cp -vpnRP * / (this copied the root of the old, over the root of the new, but skipping anything that exists... assuming that anything that exists that is crashably inportnat, was recently upgraded with the buildworld) 6) rm -rf /etc/ and /usr/local/etc/. replace both with etc/ and usr/local/etc/ from the tarball. 7) reboot. i logged in as my normal user, which i did not create as a part of my reinstall. everything seems to have picked up and kept going as if nothign happened, excluding /tmp.... i could not write to it at first (and thus, could not startkde, but i 777'd it and now things are working). it took me 3 attempts to finally cp -vpnRP correctly, without spewing files all over the wrong places, but i have to say, im pretty happy with my result! (/me scratches "practice total system recovery" off list of things to do) cheers, jonathan From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 01:36:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6790916A43C for ; Fri, 2 Jun 2006 01:36:28 +0000 (UTC) (envelope-from solinym@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.170]) by mx1.FreeBSD.org (Postfix) with ESMTP id B5B1943D46 for ; Fri, 2 Jun 2006 01:36:27 +0000 (GMT) (envelope-from solinym@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so327773uge for ; Thu, 01 Jun 2006 18:36:26 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=Jye6tjOIPb3O6rlcCtgCcIyEKn8wzabLKSMHgVGNhOariOzCDjmlGBbB5axde6qHraH5pZaqsm0u40ZBZUpnG3/uiTjerVLPM5e9YCJmNvIbKEh79kp9L3EHhW1dYu9GnYfdWbl7l4Jih89iZ1ORgKIfS4cVkG8vuYHcgdNhP0Q= Received: by 10.78.20.13 with SMTP id 13mr225034hut; Thu, 01 Jun 2006 18:12:21 -0700 (PDT) Received: by 10.78.58.20 with HTTP; Thu, 1 Jun 2006 18:12:21 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 20:12:21 -0500 From: "Travis H." To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: is vinum in FBSD 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 01:36:28 -0000 I recently installed 6.0, and there doesn't seem to be a vinum binary. There is a gvinum binary, but it doesn't even implement all of the commands in its own help screen. I'm somewhat confused. Did I screw up my install, or is this normal? Is there some kind of IP lawsuit over vinum or something? -- Scientia Est Potentia -- Eppur Si Muove Security "guru" for rent or hire - http://www.lightconsulting.com/~travis/ -><- GPG fingerprint: 9D3F 395A DAC5 5CCC 9066 151D 0A6B 4098 0C55 1484 From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 02:03:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4A54E16A57A for ; Fri, 2 Jun 2006 02:03:48 +0000 (UTC) (envelope-from mfitzgerald@pacific.net.au) Received: from jay.exetel.com.au (jay.exetel.com.au [220.233.0.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id 81E2343D46 for ; Fri, 2 Jun 2006 02:03:47 +0000 (GMT) (envelope-from mfitzgerald@pacific.net.au) Received: (qmail 4412 invoked by uid 507); 2 Jun 2006 12:03:45 +1000 Received: from 28.101.233.220.exetel.com.au (HELO ?192.168.1.100?) (220.233.101.28) by jay.exetel.com.au with SMTP; 2 Jun 2006 12:03:45 +1000 Mime-Version: 1.0 (Apple Message framework v623) In-Reply-To: <20060602005613.DDBF843D4C@mx1.FreeBSD.org> References: <20060602005613.DDBF843D4C@mx1.FreeBSD.org> Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Malcolm Fitzgerald Date: Fri, 2 Jun 2006 12:03:45 +1000 To: freebsd-questions@FreeBSD. ORG X-Mailer: Apple Mail (2.623) Cc: Subject: Re: troubleshooting network settings X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 02:03:51 -0000 On 02/06/2006, at 10:54 AM, Steve Bertrand wrote: > >>> Take a look at the 'ServerName' directive in your >> httpd.conf file. Try >>> uncommenting said directive, and put your IP address beside it. >> >> This line is already in place >> >> ServerName 127.0.0.1:80 > > What about something like: > > ServerName 192.168.1.10:80 That works for the numbered address, though it is extremely slow, about a minute to respond and virtual hosting doesn't work. At this point Apache is running but localhost loopback address is lost. malcolm From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 02:18:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9A62B16A708 for ; Fri, 2 Jun 2006 02:18:41 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2A67043D46 for ; Fri, 2 Jun 2006 02:18:41 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k522IeAm013277; Thu, 1 Jun 2006 22:18:41 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k522IefU013276; Thu, 1 Jun 2006 22:18:40 -0400 (EDT) From: Jerry McAllister Message-Id: <200606020218.k522IefU013276@clunix.cl.msu.edu> To: linuxbsdunix@gmail.com (Adam M) Date: Thu, 1 Jun 2006 22:18:40 -0400 (EDT) In-Reply-To: <48269bf80606011703g1c4482dau94d3e2539aeb90a@mail.gmail.com> X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Adding as a second hard drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 02:18:47 -0000 > > Yes, I was wondering what the best way was to add a second hard drive to my > existing FreeBSD system, I searched the Handbook, but cannot find it. Basic process: Get a good, that either works with your existing controller or also get a controller with is. eg. If it is SCSI and you only have SATA you will need another controller, etc. Install it in the box and boot the machine. Observe the boot messages or use dmesg to make sure it is recognized and that you know how the system is identified. It will probably be either da1 or ad1 depending on whether it is SCSI or SATA. Decide on how you want the new disk divided. Use fdisk to create a FreeBSD slice on the disk Use bsdlabel (or disklabel for 4.xxx systems and before) to create at least one partition within the slice. Use newfs to build a filesystem on all of the partitions you create with bsdlabel. create a mount point (for example 'mkdir /newdsk') Edit the /etc/fstab file to add an entry to make it mount upon boot. Mount the new disk (For example 'mount /newdsk' or just 'mount -a') The man pages for fdisk, bsdlabel and newfs have all the information you need but can be a little confusing. In the bsdlabel man page there are some examples near the bottom that are good. They suggest using dd to overwrite anything that might preexist in the first sector. That isn't always needed, but can fix things if that sector is a problem. Actually, I usually write around the first 100 sectors just for good measure when I need it. The only more complicated things are if you want to make more than one partition and/or slice, and if you want to be able to boot from it. More slices and partitions amounts to the same, but just require some calculations. Making it bootable requires using -B on both fdisk and bsdlabel. All this can also be done using sysinstall, but I prefer doing it straight up with the regular tools. Read the man pages. Good luck, ////jerry > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 02:20:24 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7CF1E16AE9F for ; Fri, 2 Jun 2006 02:20:24 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-scotia.atl.sa.earthlink.net (pop-scotia.atl.sa.earthlink.net [207.69.195.65]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2557043D46 for ; Fri, 2 Jun 2006 02:20:24 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeble.com) by pop-scotia.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1FlzGx-0005DN-00 for freebsd-questions@freebsd.org; Thu, 01 Jun 2006 22:20:23 -0400 Date: Thu, 1 Jun 2006 22:21:01 -0400 From: Randy Pratt To: freebsd-questions@freebsd.org Message-Id: <20060601222101.7e0fe0cf.bsd-unix@earthlink.net> X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Odd sendmail behavior change X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 02:20:25 -0000 Sendmail seems to have changed its behavior in the last week. I only use sendmail for system mail and it was working up until May 28: May 28 03:08:23 kt sendmail[96390]: k4S78MdC096390: to=root, ctladdr=root (0/0), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=32393, relay=[127.0.0.1] [12 7.0.0.1], dsn=2.0.0, stat=Sent (k4S78MRA096392 Message accepted for delivery) May 28 03:09:39 kt sm-mta [96399]: k4S78MRA096392: to=, delay =00:01:16, xdelay=00:01:16, mailer=esmtp, pri=32709, relay=hus.parkingspa.com. [ 66.246.195.41], dsn=4.0.0, stat=Deferred: Operation timed out with hus.parkingspa.com. Now all system mail seems to want to be forwarded thru some relay at hus.parkingspa.com. I have no clue where this came from nor can I find any configuration for it. My sendmail configuration has always been the default (6.1-STABLE). The only 'configuration' I've done is to alias root's mail to my local user in /etc/aliases. Have there been any changes to sendmail or required configurations that I've missed. src/UPDATING gave no clues and I've grepped files trying to find where "hus.parkingspa.com" could have came from to no avail. Any suggestions for fixing this would be appreciated. If any information is needed, just ask. Randy From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 02:53:43 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B4CE16A805 for ; Fri, 2 Jun 2006 02:53:43 +0000 (UTC) (envelope-from lamont@cluepon.com) Received: from clavin.cluepon.com (clavin.cluepon.com [64.154.215.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id C73C043D58 for ; Fri, 2 Jun 2006 02:53:42 +0000 (GMT) (envelope-from lamont@cluepon.com) Received: from lamont by clavin.cluepon.com with local (Exim 3.03 #1) id 1FlznC-000DOg-00 for questions@freebsd.org; Thu, 01 Jun 2006 19:53:42 -0700 Date: Thu, 1 Jun 2006 19:53:42 -0700 From: Lamont Lucas To: questions@freebsd.org Message-ID: <20060602025341.GH46634@clavin.cluepon.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Organization: Cluepon Consulting, Inc. User-Agent: Mutt/1.5.4i Cc: Subject: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 02:53:43 -0000 I recently upgraded my jumpstart server from 5.5 to 6.1 and have had some issues getting the new jumpstart process working. Specifically, while using my old install.cfg, my new machines were not being built with a kernel. I figured out that the sysinstall manpage is out of date and as of 6.x there is a new distribution that needs to be installed, named kernels. However, even after adding that: ################################ # Select which distributions we want. dists=base kernels manpages catpages proflibs dict distSetCustom ################################ the kernel was still not installed. It dosen't even look like sysinstall attempted to process it, either. I'm going through the sysinstall source to see if it's aware of kernels, but having no luck yet. Has anybody successfully used a 6.x machine to build a jumpstart server? Is there a better source for automating sysinstall info than the manpage? (I originally used the freebsd.org handbook site on pxeboot, but it was horribly out of date (4.x) and later had more luck with http://www.daemonsecurity.com/pub/pxeboot/article.html, which is how I got my 5.5 machine working. I see it has been updated for 6.x but uses a non-custom dist install set, which isn't exactly what I want) -- - Lamont "I am not an atomic playboy." From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 03:03:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5B61A16A487 for ; Fri, 2 Jun 2006 03:03:42 +0000 (UTC) (envelope-from on@cs.ait.ac.th) Received: from mail.cs.ait.ac.th (mail.cs.ait.ac.th [192.41.170.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7DA2D43D49 for ; Fri, 2 Jun 2006 03:03:41 +0000 (GMT) (envelope-from on@cs.ait.ac.th) Received: from banyan.cs.ait.ac.th (banyan.cs.ait.ac.th [192.41.170.5]) by mail.cs.ait.ac.th (8.13.1/8.12.11) with ESMTP id k5233Z09052184 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 2 Jun 2006 10:03:35 +0700 (ICT) Received: (from on@localhost) by banyan.cs.ait.ac.th (8.13.3/8.12.11) id k5233Zbf097151; Fri, 2 Jun 2006 10:03:35 +0700 (ICT) Date: Fri, 2 Jun 2006 10:03:35 +0700 (ICT) Message-Id: <200606020303.k5233Zbf097151@banyan.cs.ait.ac.th> From: Olivier Nicole To: bsd-unix@earthlink.net In-reply-to: <20060601222101.7e0fe0cf.bsd-unix@earthlink.net> (message from Randy Pratt on Thu, 1 Jun 2006 22:21:01 -0400) References: <20060601222101.7e0fe0cf.bsd-unix@earthlink.net> X-Virus-Scanned: on CSIM by amavisd-milter (http://www.amavis.org/) Cc: freebsd-questions@freebsd.org Subject: Re: Odd sendmail behavior change X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 03:03:49 -0000 > Now all system mail seems to want to be forwarded thru some relay a> t hus.parkingspa.com. I have no clue where this came from nor Try "dig kt.weeble.com" it is just an alias name for hus.parkingspa.com olivier From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 04:03:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 379ED16A616 for ; Fri, 2 Jun 2006 04:03:39 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-altamira.atl.sa.earthlink.net (pop-altamira.atl.sa.earthlink.net [207.69.195.62]) by mx1.FreeBSD.org (Postfix) with ESMTP id D6BC743D46 for ; Fri, 2 Jun 2006 04:03:38 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeble.com) by pop-altamira.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1Fm0sm-0005jm-00; Fri, 02 Jun 2006 00:03:32 -0400 Date: Fri, 2 Jun 2006 00:04:04 -0400 From: Randy Pratt To: Olivier Nicole Message-Id: <20060602000404.31c6aeb7.bsd-unix@earthlink.net> In-Reply-To: <200606020303.k5233Zbf097151@banyan.cs.ait.ac.th> References: <20060601222101.7e0fe0cf.bsd-unix@earthlink.net> <200606020303.k5233Zbf097151@banyan.cs.ait.ac.th> X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Odd sendmail behavior change X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 04:03:39 -0000 On Fri, 2 Jun 2006 10:03:35 +0700 (ICT) Olivier Nicole wrote: > > Now all system mail seems to want to be forwarded thru some relay > a> t hus.parkingspa.com. I have no clue where this came from nor > > Try "dig kt.weeble.com" it is just an alias name for hus.parkingspa.com Doh.. the obvious.. I've been using that name internally for many years and I do have it listed in /etc/hosts. I thought that /etc/hosts was checked before bind. It was never an issue before May 28 but the solution was relatively easy: change the network name for my LAN add the hostname to /etc/mail/local-host-names restart sendmail (kill -HUP `head -1 /var/run/sendmail.pid`) Thanks for the clue stick and the quick response! It really was driving me crazy for a bit but I should know after 8 unix years that when contradictions exist, check the premises. I never dreamed anyone would actually use such a stupid hostname for real ;-) Best regards, Randy -- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 04:11:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 29B6016A4FE for ; Fri, 2 Jun 2006 04:11:13 +0000 (UTC) (envelope-from phisher1@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id B117743D46 for ; Fri, 2 Jun 2006 04:11:12 +0000 (GMT) (envelope-from phisher1@gmail.com) Received: by wx-out-0102.google.com with SMTP id i31so312357wxd for ; Thu, 01 Jun 2006 21:11:12 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=YzZTuwDlECNG7KMxGGCMecF7KWHbM0jYESTJWBPuUJz51J6U7df+bwagNdjse/2U7AEfHAlvddolctaX1zQU0kpHO0D2pWF5MS9eZ0xoeZXjHp77q5oMn/makjpTnT1J0UUqp9GpzqpT72Es5V/xAJn/fG0acVRqb5jjOM58z5c= Received: by 10.70.102.11 with SMTP id z11mr1877805wxb; Thu, 01 Jun 2006 21:11:12 -0700 (PDT) Received: by 10.70.53.9 with HTTP; Thu, 1 Jun 2006 21:11:12 -0700 (PDT) Message-ID: <291ddc4f0606012111x11ded311rb397522a7f29fb5a@mail.gmail.com> Date: Thu, 1 Jun 2006 23:11:12 -0500 From: "Daniel Corrigan" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: What Port Installs /usr/local/lib/libiconv.la? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 04:11:16 -0000 libiconv)-> make -DWITH_EXTRA_PATCHES install I know its over a year later, but haha i just found out and saw your old post From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 05:13:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 30E8E16A5EF for ; Fri, 2 Jun 2006 05:13:41 +0000 (UTC) (envelope-from lordsporkton@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.194]) by mx1.FreeBSD.org (Postfix) with ESMTP id AEA0843D46 for ; Fri, 2 Jun 2006 05:13:40 +0000 (GMT) (envelope-from lordsporkton@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so668304nzo for ; Thu, 01 Jun 2006 22:13:40 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=suTn11NU9jn7RYxbiY6kBIy7qJ6JsMtUW9WOiUP5dfXQ53R0Wh9NT9k0ok/aE2vumAwKy6Yf8V/CCIYDRlFoh4iECeq2AMnEn1dWvbCzcB/McFQrkBXlbThrpipZD847V3pK8Mry8dQUt5Ifiv6M05yDXZfjSOvsb2nA3YdVWYw= Received: by 10.65.250.16 with SMTP id c16mr1250844qbs; Thu, 01 Jun 2006 22:13:39 -0700 (PDT) Received: by 10.65.11.14 with HTTP; Thu, 1 Jun 2006 22:13:39 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 22:13:39 -0700 From: "Lawrence Horvath" To: freebsd-questions@freebsd.org In-Reply-To: <20060531223706.GA4607@ayvali.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060530212241.GK3413@ayvali.org> <200605301630.45755.kirk@daycos.com> <20060531223706.GA4607@ayvali.org> Subject: Re: sudoedit, restricting to particular folder X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 05:13:41 -0000 well in that case what can uyou recommend for editing only zone files and being able to run rndc, that is my main goal, i need to lock a system so that only "rndc reload", "rndc reconfig" and editing zone files is possible by a group of users, any suggestins? and/or how do you do this? On 5/31/06, N.J. Thomas wrote: > * Kirk Strauser [2006-05-30 16:30:45 -0500]: > > > luser ALL = (root) sudoedit /home/luser/foo/* > > > > Why not give them root while you're at it: > > luser$ cd ~/foo; ln -s /etc/master.passwd; sudoedit ~/foo/master.passwd > > Yikes, he's right. Don't put that in your sudoers file. > > > I found some notes on the sudo mailing lists while Googling, that > > luser ALL = (root) sudoedit /home/luser/foo/ > > would work one day for all files in /home/luser/foo/, IIRC Todd Miller > said this would come out in version 1.7, but it looks like development > of sudo has stalled, so short of writing your own wrapper script (which > shouldn't be terribly hard) I don't know how to solve the original > problem of restricting sudoedit to a particular directly using sudo > alone. > > Thomas > > -- > N.J. Thomas > njt@ayvali.org > Etiamsi occiderit me, in ipso sperabo > -- -Lawrence From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 05:25:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 32BEA16A445 for ; Fri, 2 Jun 2006 05:25:53 +0000 (UTC) (envelope-from subhro.kar@gmail.com) Received: from nz-out-0102.google.com (nz-out-0102.google.com [64.233.162.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6546F43D46 for ; Fri, 2 Jun 2006 05:25:52 +0000 (GMT) (envelope-from subhro.kar@gmail.com) Received: by nz-out-0102.google.com with SMTP id 9so669995nzo for ; Thu, 01 Jun 2006 22:25:51 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=PQaIivRJRWDf5VwNhtWZGXLPvD7h8CfaIKKVMiEuc+x/X6waWIPPyIJf3/Zbpta8WPl0QurYDA3t/W4gdIylEQiGNUMSf+Pao6ElkNmyBpaQ3uI+BlNWZaRgKuArYXGX5B8yfsnhUUB2MD0gzW8YUN8iQqTNhx234RJJHN61Va0= Received: by 10.64.243.2 with SMTP id q2mr1264850qbh; Thu, 01 Jun 2006 22:25:51 -0700 (PDT) Received: by 10.65.250.20 with HTTP; Thu, 1 Jun 2006 22:25:51 -0700 (PDT) Message-ID: Date: Fri, 2 Jun 2006 10:55:51 +0530 From: Subhro To: "Lowell Gilbert" In-Reply-To: <44u074egvr.fsf@be-well.ilk.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> <44u074egvr.fsf@be-well.ilk.org> Cc: freebsd-openoffice@freebsd.org, freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 05:25:53 -0000 On 6/2/06, Lowell Gilbert wrote: > Subhro writes: > > > On 6/1/06, Lowell Gilbert wrote: > >> Andrea Venturoli writes: > >> > >> > I reported it several months ago and all I got to be told was that > >> > it's a strange problem. > >> > >> Well, that's true... > >> > >> Do you have devel/epm installed by any chance? > > > > No I do not have epm installed. Should I install it and try again? > > No. If you had it, I would recommend removing it before trying again. > Initially did not have epm. Even tried to compile *with* epm installed. Still stuck up at the same place. :-( Subhro -- Subhro Kar Security Engineer iViZ Techno Solutions Pvt. Ltd. Dhanshree Bldg, 1st Floor Plot XI-16, Sector V Salt Lake City 700091 India From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 05:32:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EFB2E16AB3B for ; Fri, 2 Jun 2006 05:32:02 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 957E443D45 for ; Fri, 2 Jun 2006 05:32:02 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fm2GO-0005pV-2X; Fri, 02 Jun 2006 01:32:00 -0400 Message-ID: <447FCD4C.9090706@webanoide.org> Date: Fri, 02 Jun 2006 15:31:56 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.2 (Macintosh/20060308) MIME-Version: 1.0 To: "Travis H." References: In-Reply-To: X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: freebsd-questions@freebsd.org Subject: Re: is vinum in FBSD 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 05:32:06 -0000 Travis H. wrote: > I recently installed 6.0, and there doesn't seem to be a vinum binary. > > There is a gvinum binary, but it doesn't even implement all of the > commands in its own help screen. > > I'm somewhat confused. Did I screw up my install, or is this normal? > > Is there some kind of IP lawsuit over vinum or something? Hi, The following is an extract from: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/vinum-vinum.html [...] Note: Starting with FreeBSD 5, Vinum has been rewritten in order to fit into the GEOM architecture (Chapter 18), retaining the original ideas, terminology, and on-disk metadata. This rewrite is called gvinum (for GEOM vinum). The following text usually refers to Vinum as an abstract name, regardless of the implementation variant. Any command invocations should now be done using the gvinum command, and the name of the kernel module has been changed from vinum.ko to geom_vinum.ko, and all device nodes reside under /dev/gvinum instead of /dev/vinum. As of FreeBSD 6, the old Vinum implementation is no longer available in the code base. [...] Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:02:14 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7BEA516A48B for ; Fri, 2 Jun 2006 06:02:14 +0000 (UTC) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id CFED343D46 for ; Fri, 2 Jun 2006 06:02:13 +0000 (GMT) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by horn.net.ru (8.13.6/8.13.1) with ESMTP id k5262BLn076517 for ; Fri, 2 Jun 2006 10:02:11 +0400 (MSD) (envelope-from horn@horn.net.ru) From: "horn" To: freebsd-questions@FreeBSD.org Date: Fri, 2 Jun 2006 10:02:11 +0400 Message-Id: <20060602055933.M13866@horn.net.ru> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 82.146.42.86 (horn) MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Cc: Subject: Hardware X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:02:14 -0000 Whether it will be installed FreeBSD 6.1-RELEASE and whether after will work on a computer: Proc: Pentium 75 MHz Menory: 16 MB RAM HDD: 1.2 Gb ? From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:08:27 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BF26A16A772 for ; Fri, 2 Jun 2006 06:08:27 +0000 (UTC) (envelope-from wbs@infowest.com) Received: from tozar.infowest.com (tozar.out.smtp.infowest.com [204.17.177.66]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7CC5543D49 for ; Fri, 2 Jun 2006 06:08:27 +0000 (GMT) (envelope-from wbs@infowest.com) Received: from alora.infowest.com (alora.client.smtp.infowest.com [204.17.177.61]) by tozar.infowest.com (Postfix) with ESMTP id 1A928247C1F for ; Fri, 2 Jun 2006 00:08:27 -0600 (MDT) Received: from [127.0.0.1] (71-213-95-210.slkc.qwest.net [71.213.95.210]) by alora.infowest.com (Postfix) with ESMTP id D800E1E304C for ; Fri, 2 Jun 2006 00:08:26 -0600 (MDT) Message-ID: <447FD5CC.5050701@infowest.com> Date: Fri, 02 Jun 2006 00:08:12 -0600 From: Lorin Lund User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Can't make wi0: work on Toshiba notebook with mini-PCI network card. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:08:27 -0000 I have a Toshiba Satelite Pro 6100 with a Toshiba mini-PCI wireless network card. The wireless stuff seems to be there (for as much as I know) This is a dual boot machine. When booted as Windows XP it connects and works just fine. I see that ifconfig -a shows the right IP address. But there is a lot more info there and I don't know what values are supposed to be there. The wireless access point is 192.168.0.1 ++++ dmesg +++++ wi0: at port 0xd000-0xd03f irq 11 function 0 config 1 on pccard0 wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (8.10.1) wi0: Ethernet address: 00:02:2d:57:72:77 ++++ from /etc/rc.conf +++++ ifconfig_wi0="inet 192.168.0.20 netmask 255.255.255.0 ssid TBJTRUCKING wepmode on wepkey 0xzzzzzzzzzzzzzzzzzzzzzzzzzz" +++++ ifconfig -a +++++ fxp0: flags=8802 mtu 1500 options=8 ether 00:00:39:9e:58:d0 media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 wi0: flags=8843 mtu 1500 inet6 fe80::202:2dff:fe57:7277%wi0 prefixlen 64 scopeid 0x3 inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:02:2d:57:72:77 media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) status: associated ssid TBJTRUCKING channel 1 bssid 00:15:05:12:74:43 stationname "FreeBSD WaveLAN/IEEE node" authmode OPEN privacy MIXED deftxkey UNDEF wepkey 1:104-bit txpowmax 100 bintval 100 ++++ ping ++++++ PING 192.168.0.1 (192.168.0.1): 56 data bytes --- 192.168.0.1 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet los --------- when I try to kldload if_wi it seems to already be loaded. when I do kldstat it doesn't show as a loaded module. So I think the wi stuff is compiled into the kernel. That is why I've commented out the if_wi load. I'm using 6.1 RELEASE generic kernel +++++ /boot/loader.conf +++++ #if_wi_load="YES" wlan_wep_load="YES" From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:17:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7540416A981 for ; Fri, 2 Jun 2006 06:17:49 +0000 (UTC) (envelope-from youshi10@u.washington.edu) Received: from mxout4.cac.washington.edu (mxout4.cac.washington.edu [140.142.33.19]) by mx1.FreeBSD.org (Postfix) with ESMTP id 258C743D45 for ; Fri, 2 Jun 2006 06:17:49 +0000 (GMT) (envelope-from youshi10@u.washington.edu) Received: from smtp.washington.edu (smtp.washington.edu [140.142.32.139]) by mxout4.cac.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k526Hml5022556 for ; Thu, 1 Jun 2006 23:17:48 -0700 X-Auth-Received: from [128.208.5.99] (nilakantha.cs.washington.edu [128.208.5.99]) (authenticated authid=youshi10) by smtp.washington.edu (8.13.6+UW06.03/8.13.6+UW06.03) with ESMTP id k526HmNf005305 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT) for ; Thu, 1 Jun 2006 23:17:48 -0700 Message-ID: <447FD80C.9040201@u.washington.edu> Date: Thu, 01 Jun 2006 23:17:48 -0700 From: Garrett Cooper User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20060602055933.M13866@horn.net.ru> In-Reply-To: <20060602055933.M13866@horn.net.ru> Content-Type: text/plain; charset=KOI8-R; format=flowed Content-Transfer-Encoding: 7bit X-Uwash-Spam: Gauge=IIIIIII, Probability=7%, Report='__CHARSET_IS_KOI8R 0, __CT 0, __CTE 0, __CT_TEXT_PLAIN 0, __HAS_MSGID 0, __MIME_CHARSET_FARAWAY 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __SANE_MSGID 0, __USER_AGENT 0' Subject: Re: Hardware X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:17:49 -0000 horn wrote: > Whether it will be installed FreeBSD 6.1-RELEASE and whether after will work > on a computer: > Proc: Pentium 75 MHz > Menory: 16 MB RAM > HDD: 1.2 Gb ? It may work, if it will boot from a CD drive and then the bios has the capability to load the FreeBSD MBR from the hard disk, but I wouldn't dream of building world, kernel, or any ports if you can help it; that will take days or weeks. -Garrett From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:28:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7E3E316A545; Fri, 2 Jun 2006 06:28:55 +0000 (UTC) (envelope-from stephen@math.missouri.edu) Received: from sccmmhc91.asp.att.net (sccmmhc91.asp.att.net [204.127.203.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id D0B7A43D58; Fri, 2 Jun 2006 06:28:54 +0000 (GMT) (envelope-from stephen@math.missouri.edu) Received: from [10.0.0.4] (12-216-248-146.client.mchsi.com[12.216.248.146]) by sccmmhc91.asp.att.net (sccmmhc91) with ESMTP id <20060602062853m9100ojn6be>; Fri, 2 Jun 2006 06:28:53 +0000 Message-ID: <447FDAA4.60705@math.missouri.edu> Date: Fri, 02 Jun 2006 01:28:52 -0500 From: Stephen Montgomery-Smith User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.13) Gecko/20060531 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Subhro References: <44slmrr2t2.fsf@be-well.ilk.org> <447E9764.1030107@netfence.it> <44d5dtqdyu.fsf@be-well.ilk.org> <44u074egvr.fsf@be-well.ilk.org> In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-openoffice@freebsd.org, Lowell Gilbert , freebsd-questions@freebsd.org Subject: Re: Openoffice compilation failure X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:28:55 -0000 Subhro wrote: > On 6/2/06, Lowell Gilbert wrote: > >> Subhro writes: >> >> > On 6/1/06, Lowell Gilbert >> wrote: >> >> Andrea Venturoli writes: >> >> >> >> > I reported it several months ago and all I got to be told was that >> >> > it's a strange problem. >> >> >> >> Well, that's true... >> >> >> >> Do you have devel/epm installed by any chance? >> > >> > No I do not have epm installed. Should I install it and try again? >> >> No. If you had it, I would recommend removing it before trying again. >> > > Initially did not have epm. Even tried to compile *with* epm > installed. Still stuck up at the same place. :-( > > Subhro I saw an email that suggested that the problem is that the epm that comes bundled with the openoffice source has a problem with argument lines that are too long. Changing the name of the ports directory to /usr/p fixed it for me. Stephen From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:37:48 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AA68D16A6C0 for ; Fri, 2 Jun 2006 06:37:48 +0000 (UTC) (envelope-from cperciva@freebsd.org) Received: from pd4mo1so.prod.shaw.ca (shawidc-mo1.cg.shawcable.net [24.71.223.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5037343D46 for ; Fri, 2 Jun 2006 06:37:48 +0000 (GMT) (envelope-from cperciva@freebsd.org) Received: from pd3mr3so.prod.shaw.ca (pd3mr3so-qfe3.prod.shaw.ca [10.0.141.179]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with ESMTP id <0J0700I3WZQZVG60@l-daemon> for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 00:37:47 -0600 (MDT) Received: from pn2ml5so.prod.shaw.ca ([10.0.121.149]) by pd3mr3so.prod.shaw.ca (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with ESMTP id <0J0700KX3ZQZVL80@pd3mr3so.prod.shaw.ca> for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 00:37:47 -0600 (MDT) Received: from hexahedron.daemonology.net ([24.82.18.31]) by l-daemon (Sun ONE Messaging Server 6.0 HotFix 1.01 (built Mar 15 2004)) with SMTP id <0J0700AXNZPRKC50@l-daemon> for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 00:37:47 -0600 (MDT) Received: (qmail 12792 invoked from network); Fri, 02 Jun 2006 06:37:02 +0000 Received: from unknown (HELO ?127.0.0.1?) (127.0.0.1) by localhost with SMTP; Fri, 02 Jun 2006 06:37:02 +0000 Date: Thu, 01 Jun 2006 23:37:02 -0700 From: Colin Percival In-reply-to: <20060602055933.M13866@horn.net.ru> To: horn Message-id: <447FDC8E.3050707@freebsd.org> MIME-version: 1.0 Content-type: text/plain; charset=KOI8-R Content-transfer-encoding: 7bit X-Enigmail-Version: 0.94.0.0 References: <20060602055933.M13866@horn.net.ru> User-Agent: Thunderbird 1.5 (X11/20060416) Cc: freebsd-questions@freebsd.org Subject: Re: Hardware X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:37:48 -0000 horn wrote: > Whether it will be installed FreeBSD 6.1-RELEASE and whether after will work > on a computer: > Proc: Pentium 75 MHz > Menory: 16 MB RAM > HDD: 1.2 Gb ? Not unless you do build a custom kernel first. I couldn't get FreeBSD 5.4 to boot a GENERIC kernel on a system with 16 MB of RAM (until I added another 16 MB), and FreeBSD 6.1 will need at least as much. Colin Percival From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:52:38 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AB29216A426 for ; Fri, 2 Jun 2006 06:52:38 +0000 (UTC) (envelope-from hakmi@rogers.com) Received: from smtp109.rog.mail.re2.yahoo.com (smtp109.rog.mail.re2.yahoo.com [68.142.225.207]) by mx1.FreeBSD.org (Postfix) with SMTP id 1110A43D48 for ; Fri, 2 Jun 2006 06:52:37 +0000 (GMT) (envelope-from hakmi@rogers.com) Received: (qmail 8266 invoked from network); 2 Jun 2006 06:52:37 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=rogers.com; h=Received:From:To:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:X-MimeOLE:Thread-Index; b=AfmY+4H+WHhLeFSBIubAcXS1n79BiAOD9dUe8gnATZXDZ8GycImSuYNnp59MTd0n9UAe1nbMQAFYoG+/Qiw6MwyaR+wZMWPzxOKe9p1W4PvBMdN9ZeAJlK9h9a33+JzEjwg7G3DZMwQLhMwP5zLcflt0VrixItA276S9Elr9870= ; Received: from unknown (HELO tamouh) (hakmi@rogers.com@70.27.160.99 with login) by smtp109.rog.mail.re2.yahoo.com with SMTP; 2 Jun 2006 06:52:37 -0000 From: "Tamouh H." To: "'Adam M'" , Date: Fri, 2 Jun 2006 02:52:41 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: <48269bf80606011703g1c4482dau94d3e2539aeb90a@mail.gmail.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaF2BWxhKv0f8bRQumHcyIdpk4afQAOPRXg Message-Id: <20060602065237.1110A43D48@mx1.FreeBSD.org> Cc: Subject: RE: Adding as a second hard drive X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:52:38 -0000 =20 -----Original Message----- From: owner-freebsd-questions@freebsd.org = [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of Adam M Sent: June 1, 2006 8:04 PM To: freebsd-questions@freebsd.org Subject: Adding as a second hard drive Yes, I was wondering what the best way was to add a second hard drive to = my existing FreeBSD system, I searched the Handbook, but cannot find it. _______________________________________________ It is in the Handbook, follow it to the teeth and you should be OK: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/disks-adding.ht= ml Tamouh From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 06:53:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 137B116A44A for ; Fri, 2 Jun 2006 06:53:28 +0000 (UTC) (envelope-from nvass@teledomenet.gr) Received: from matrix.teledomenet.gr (dns1.teledomenet.gr [213.142.128.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5EE0D43D49 for ; Fri, 2 Jun 2006 06:53:26 +0000 (GMT) (envelope-from nvass@teledomenet.gr) Received: from iris ([192.168.1.71]) by matrix.teledomenet.gr (8.12.10/8.12.10) with ESMTP id k526rOEY012429; Fri, 2 Jun 2006 09:53:24 +0300 From: Nikos Vassiliadis To: freebsd-questions@freebsd.org Date: Fri, 2 Jun 2006 09:48:44 +0300 User-Agent: KMail/1.9.1 References: <447DF7B5.6090507@swehack.se> <447F53EA.1000300@swehack.se> <44hd34egnn.fsf@be-well.ilk.org> In-Reply-To: <44hd34egnn.fsf@be-well.ilk.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606020948.45138.nvass@teledomenet.gr> Cc: nocturnal Subject: Re: Net dies after many torrent packets, BUG?! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 06:53:28 -0000 > nocturnal writes: > > Not sure how to answer your question but the network dies in a way > > that i can't send any packets out or recive any packets in. What > > usually helps is to run dhclient fxp0 on my card again. My friend said > > he used to bring the card down and then up again and it would solve > > the issue. > > And when it's in the failed state, what does ifconfig(8) show? that, and also do you connect with a dsl modem/router? From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 07:40:27 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A8EBF16A434 for ; Fri, 2 Jun 2006 07:40:27 +0000 (UTC) (envelope-from erikt@owl.midgard.homeip.net) Received: from pne-smtpout2-sn1.fre.skanova.net (pne-smtpout2-sn1.fre.skanova.net [81.228.11.159]) by mx1.FreeBSD.org (Postfix) with ESMTP id 356E343D45 for ; Fri, 2 Jun 2006 07:40:27 +0000 (GMT) (envelope-from erikt@owl.midgard.homeip.net) Received: from falcon.midgard.homeip.net (83.253.29.241) by pne-smtpout2-sn1.fre.skanova.net (7.2.072.1) id 447D4F710009C974 for questions@freebsd.org; Fri, 2 Jun 2006 09:40:26 +0200 Received: (qmail 47503 invoked from network); 2 Jun 2006 09:40:25 +0200 Received: from owl.midgard.homeip.net (10.1.5.7) by falcon.midgard.homeip.net with SMTP; 2 Jun 2006 09:40:25 +0200 Received: (qmail 65056 invoked by uid 1001); 2 Jun 2006 09:40:25 +0200 Date: Fri, 2 Jun 2006 09:40:25 +0200 From: Erik Trulsson To: Ted Mittelstaedt Message-ID: <20060602074025.GA65041@owl.midgard.homeip.net> Mail-Followup-To: Ted Mittelstaedt , Chuck Swiger , danial_thom@yahoo.com, questions@freebsd.org References: <447F069C.4000002@mac.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.11 Cc: danial_thom@yahoo.com, questions@freebsd.org Subject: Re: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 07:40:27 -0000 On Thu, Jun 01, 2006 at 05:01:08PM -0700, Ted Mittelstaedt wrote: > > > >-----Original Message----- > >From: owner-freebsd-questions@freebsd.org > >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Chuck Swiger > >Sent: Thursday, June 01, 2006 8:24 AM > >To: danial_thom@yahoo.com > >Cc: questions@freebsd.org > >Subject: Re: Recommendation for 1000BASE-SX card? > > > [...] > > > but I'm > >generally of > >the opinion that FreeBSD works just fine, most of the time, on > >most hardware, > >without any specific tweaking or tuning to be entirely usable. > > > > It does not. In reality, current versions of FreeBSD work better > on current versions of hardware. FreeBSD has a terrible history > of breaking things that used to work on old hardware, then > when someone complains that something is broken, the developers > in effect tell them their old hardware is crappy junk and to buy new > hardware. > > Try running FreeBSD 6.X on a 80486 or Pentium system. FreeBSD 6.x works just fine on a Pentium system, as long as you have enough memory. > FreeBSD 4.11 > runs just fine on that hardware, if a bit slowly. But, I don't need > speed to control my garden sprinklers. > -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 07:53:37 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BB25516A4E5 for ; Fri, 2 Jun 2006 07:53:37 +0000 (UTC) (envelope-from mikhailg@webanoide.org) Received: from cayster.site5.com (cayster.multisite.site5.com [216.118.97.189]) by mx1.FreeBSD.org (Postfix) with ESMTP id 81B6443D58 for ; Fri, 2 Jun 2006 07:53:36 +0000 (GMT) (envelope-from mikhailg@webanoide.org) Received: from ppp110-20.lns1.hba1.internode.on.net ([150.101.110.20] helo=[192.168.0.4]) by cayster.site5.com with esmtpa (Exim 4.52) id 1Fm4TN-0004mw-2e; Fri, 02 Jun 2006 03:53:33 -0400 Message-ID: <447FEE79.2040004@webanoide.org> Date: Fri, 02 Jun 2006 17:53:29 +1000 From: Mikhail Goriachev Organization: Webanoide User-Agent: Thunderbird 1.5.0.4 (Macintosh/20060530) MIME-Version: 1.0 To: Jon Falconer References: In-Reply-To: X-Enigmail-Version: 0.94.0.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: This message has been scanned by ClamAV. X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - cayster.site5.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - webanoide.org X-Source: X-Source-Args: X-Source-Dir: Cc: questions@freebsd.org Subject: Re: difference between deinstall and pkg_delete? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 07:53:41 -0000 Jon Falconer wrote: > Greetings, > > I see in the man page for ports the following: > > reinstall Use this to restore a port after using pkg_delete(1) > when you should have used deinstall. > > So I'm wondering what is the difference between pkg_delete and using "make > deinstall" from within the ports directory? What does "make deinstall" do > that pkg_delete does not do? What does pkg_delete do that "make deinstall" > does not do? Hi, This will point you in the right direction: http://www.bsdforums.org/forums/archive/index.php/t-29467.html man pkg_delete man pkg_deinstall Cheers, Mikhail. -- Mikhail Goriachev Webanoide Telephone: +61 (0)3 62252501 Mobile Phone: +61 (0)4 38255158 E-Mail: mikhailg@webanoide.org Web: http://www.webanoide.org PGP Key ID: 0x4E148A3B PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D 4E14 8A3B From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 08:02:33 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EE2F816A6B5 for ; Fri, 2 Jun 2006 08:02:33 +0000 (UTC) (envelope-from bsd@bathnetworks.com) Received: from lmail.bathnetworks.co.uk (mail.bathnetworks.com [84.92.24.252]) by mx1.FreeBSD.org (Postfix) with ESMTP id 05D3B43D48 for ; Fri, 2 Jun 2006 08:02:32 +0000 (GMT) (envelope-from bsd@bathnetworks.com) Received: (qmail 30504 invoked by uid 510); 2 Jun 2006 09:09:02 +0100 Received: from 127.0.0.1 by lmail.bathnetworks.co.uk (envelope-from , uid 508) with qmail-scanner-1.24-st-qms (clamdscan: 0.88/1261. spamassassin: 3.0.2. perlscan: 1.24-st-qms. Clear:RC:0(127.0.0.1):SA:0(-4.5/5.0):. Processed in 2.353233 secs); 02 Jun 2006 08:09:02 -0000 X-Spam-Status: No, hits=-4.5 required=5.0 X-Antivirus-MYDOMAIN-Mail-From: bsd@bathnetworks.com via lmail.bathnetworks.co.uk X-Antivirus-MYDOMAIN: 1.24-st-qms (Clear:RC:0(127.0.0.1):SA:0(-4.5/5.0):. Processed in 2.353233 secs Process 30495) Received: from localhost (HELO 192.168.0.50) (bsd@bathnetworks.com@127.0.0.1) by lmail.bathnetworks.co.uk with SMTP; 2 Jun 2006 09:09:00 +0100 Received: from 192.168.0.104 (SquirrelMail authenticated user bsd@bathnetworks.com) by 192.168.0.50 with HTTP; Fri, 2 Jun 2006 09:09:00 +0100 (BST) Message-ID: <62763.192.168.0.104.1149235740.squirrel@192.168.0.50> In-Reply-To: References: Date: Fri, 2 Jun 2006 09:09:00 +0100 (BST) From: bsd@bathnetworks.com To: "Travis H." User-Agent: SquirrelMail/1.4.4 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: freebsd-questions@freebsd.org Subject: Re: is vinum in FBSD 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 08:02:35 -0000 > I recently installed 6.0, and there doesn't seem to be a vinum binary. > > There is a gvinum binary, but it doesn't even implement all of the > commands in its own help screen. > > I'm somewhat confused. Did I screw up my install, or is this normal? > > Is there some kind of IP lawsuit over vinum or something? > -- > Scientia Est Potentia -- Eppur Si Muove > Security "guru" for rent or hire - http://www.lightconsulting.com/~travis/ > -><- > GPG fingerprint: 9D3F 395A DAC5 5CCC 9066 151D 0A6B 4098 0C55 1484 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" vinum has been replaced by gvinum and geom see the handbook for setup. Rob > From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 08:43:44 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DFC0716A435 for ; Fri, 2 Jun 2006 08:43:44 +0000 (UTC) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2256143D4C for ; Fri, 2 Jun 2006 08:43:43 +0000 (GMT) (envelope-from horn@horn.net.ru) Received: from horn.net.ru (horn.net.ru [82.146.41.48]) by horn.net.ru (8.13.6/8.13.1) with ESMTP id k528hfaq043417 for ; Fri, 2 Jun 2006 12:43:41 +0400 (MSD) (envelope-from horn@horn.net.ru) From: "horn" To: freebsd-questions@FreeBSD.org Date: Fri, 2 Jun 2006 12:43:41 +0400 Message-Id: <20060602084059.M80347@horn.net.ru> X-Mailer: OpenWebMail 2.52 20060502 X-OriginatingIP: 82.146.42.86 (horn) MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Cc: Subject: Requirements X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 08:43:45 -0000 What the minimum system requirements of FreeBSD 6.1 ? From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 08:47:24 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9CAA516A428 for ; Fri, 2 Jun 2006 08:47:24 +0000 (UTC) (envelope-from cknipe@savage.za.org) Received: from www16b.your-server.co.za (www16b.your-server.co.za [196.22.132.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 154FD43D49 for ; Fri, 2 Jun 2006 08:47:23 +0000 (GMT) (envelope-from cknipe@savage.za.org) Received: from [127.0.0.1] (helo=localhost) by www16b.your-server.co.za with esmtp (Exim 4.52) id 1Fm5JL-0007nC-JQ; Fri, 02 Jun 2006 10:47:19 +0200 Received: from 196-207-40-213.gprs.vodacom.co.za (196-207-40-213.gprs.vodacom.co.za [196.207.40.213]) by default.your-server.co.za (IMP) with HTTP for ; Fri, 02 Jun 2006 10:47:15 +0200 Message-ID: <1149238035.447ffb138552c@196.22.132.16> Date: Fri, 02 Jun 2006 10:47:15 +0200 From: cknipe@savage.za.org To: horn References: <20060602084059.M80347@horn.net.ru> In-Reply-To: <20060602084059.M80347@horn.net.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.5 X-Originating-IP: 196.207.40.213 Cc: freebsd-questions@FreeBSD.org Subject: Re: Requirements X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 08:47:24 -0000 Quoting horn : > What the minimum system requirements of FreeBSD 6.1 ? http://www.freebsd.org/releases/6.0R/installation-i386.html From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:05:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DE57D16A420 for ; Fri, 2 Jun 2006 10:05:53 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 22E4843D45 for ; Fri, 2 Jun 2006 10:05:42 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k52A4QE3057665; Fri, 2 Jun 2006 05:04:50 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <44800D1F.3010200@daleco.biz> Date: Fri, 02 Jun 2006 05:04:15 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: "Travis H." References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: is vinum in FBSD 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:05:54 -0000 Travis H. wrote: > > Is there some kind of IP lawsuit over vinum or something? If so, it's never been mentioned ;-) It's a valid question, but I don't think Greg's that kind of guy. As for Veritas, I *think* they had some sort of agreement (re: the name), (but I could be blowing smoke there); IIRC, vinum(8) was "patterned after the idea of" the Veritas software, and not in any way a "copy" or "clone" of it.... As others have stated, vinum has been replaced by "gvinum". Greg had stated in the past that the GEOM layer's introduction had "badly broken vinum", so I'm guessing that vinum was removed so that no one would attempt to use it on a newer system and get "unexpected" results. My $0.02, IANAL, IANAE, etc., Kevin Kinsey -- It is now 10 p.m. Do you know where Henry Kissinger is? -- Elizabeth Carpenter From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:08:56 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A429416A420 for ; Fri, 2 Jun 2006 10:08:56 +0000 (UTC) (envelope-from freebsd-listen@fabiankeil.de) Received: from smtprelay01.ispgateway.de (smtprelay01.ispgateway.de [80.67.18.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id D090643D48 for ; Fri, 2 Jun 2006 10:08:55 +0000 (GMT) (envelope-from freebsd-listen@fabiankeil.de) Received: (qmail 27665 invoked from network); 2 Jun 2006 10:08:53 -0000 Received: from unknown (HELO localhost) ([pbs]775067@[217.50.129.43]) (envelope-sender ) by smtprelay01.ispgateway.de (qmail-ldap-1.03) with SMTP for ; 2 Jun 2006 10:08:53 -0000 Date: Fri, 2 Jun 2006 12:08:45 +0200 From: Fabian Keil To: "horn" Message-ID: <20060602120845.0b5acb14@localhost> In-Reply-To: <20060602055933.M13866@horn.net.ru> References: <20060602055933.M13866@horn.net.ru> X-Mailer: Sylpheed-Claws 2.1.1 (GTK+ 2.8.17; i386-portbld-freebsd6.1) X-PGP-KEY-URL: http://www.fabiankeil.de/gpg-keys/freebsd-listen-2006-08-19.asc User-Agent: 321 test Mime-Version: 1.0 Content-Type: multipart/signed; boundary="Sig_UrBQADej6mWmgB/jW9mj1q8"; protocol="application/pgp-signature"; micalg=PGP-SHA1 Cc: freebsd-questions@FreeBSD.org Subject: Re: Hardware X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:08:56 -0000 --Sig_UrBQADej6mWmgB/jW9mj1q8 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable "horn" wrote: > Whether it will be installed FreeBSD 6.1-RELEASE and whether after > will work on a computer: > Proc: Pentium 75 MHz > Menory: 16 MB RAM > HDD: 1.2 Gb ? I tried to install FreeBSD 6.1-PRERELEASE on a Pentium 90 with 16 MB RAM a few weeks ago. The BIOS wasn't able to boot from CD and while I could boot from floppy disks, FreeBSD would reboot after loading the third one. I assume the kernel and the installer were to heavy for the amount of memory. To solve the problem I put the hard drive in a more powerful system, installed FreeBSD, compiled a small kernel without any modules and put it back. Of course the system isn't fast, but it works. mount_nfs would panic the system, but there's a workaround (and some more information about my system) in: http://www.freebsd.org/cgi/query-pr.cgi?pr=3Dkern/94830 Fabian --=20 http://www.fabiankeil.de/ --Sig_UrBQADej6mWmgB/jW9mj1q8 Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQFEgA40jV8GA4rMKUQRArr7AJwIW1D+ky5KnctNgYZF/DTvNd6vrwCgoqc6 vA1eQj/FSPGTWuaFs9u0ZzE= =p+DR -----END PGP SIGNATURE----- --Sig_UrBQADej6mWmgB/jW9mj1q8-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:12:48 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4789316A47B for ; Fri, 2 Jun 2006 10:12:48 +0000 (UTC) (envelope-from robin@reportlab.com) Received: from relay01.pair.com (relay01.pair.com [209.68.5.15]) by mx1.FreeBSD.org (Postfix) with SMTP id CBDFE43D6E for ; Fri, 2 Jun 2006 10:12:46 +0000 (GMT) (envelope-from robin@reportlab.com) Received: (qmail 84589 invoked from network); 2 Jun 2006 10:12:45 -0000 Received: from unknown (HELO ?192.168.0.3?) (unknown) by unknown with SMTP; 2 Jun 2006 10:12:45 -0000 X-pair-Authenticated: 217.196.247.135 Message-ID: <44800F1D.50100@chamonix.reportlab.co.uk> Date: Fri, 02 Jun 2006 11:12:45 +0100 From: Robin Becker User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:12:48 -0000 I am trying to use qpopper for delivering mail to my PC based mail client from a freeBSD 6.0 release system -ERR [AUTH] "root": access denied. -- Robin Becker From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:18:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5060816A42B for ; Fri, 2 Jun 2006 10:18:49 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id B384743D46 for ; Fri, 2 Jun 2006 10:18:48 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k52AHeow057744; Fri, 2 Jun 2006 05:18:02 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <4480103A.9010000@daleco.biz> Date: Fri, 02 Jun 2006 05:17:30 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: horn References: <20060602055933.M13866@horn.net.ru> <447FDC8E.3050707@freebsd.org> In-Reply-To: <447FDC8E.3050707@freebsd.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Hardware X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:18:49 -0000 Colin Percival wrote: > horn wrote: >> Whether it will be installed FreeBSD 6.1-RELEASE and whether after will work >> on a computer: >> Proc: Pentium 75 MHz >> Menory: 16 MB RAM >> HDD: 1.2 Gb ? > > Not unless you do build a custom kernel first. I couldn't get FreeBSD 5.4 to > boot a GENERIC kernel on a system with 16 MB of RAM (until I added another 16 > MB), and FreeBSD 6.1 will need at least as much. > > Colin Percival You'll need at least 24 MB of RAM, according to: ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/6.0-RELEASE/INSTALL.TXT 1.2 Hardware Requirements FreeBSD for the i386 requires a 486 or better processor and at least 24 MB of RAM. You will need at least 150MB of free hard drive space for the most minimal installation. See below for ways of shrinking existing DOS partitions in order to install FreeBSD. I remember seeing a little discussion of this on the lists earlier. Kevin Kinsey -- For large values of one, one equals two, for small values of two. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:34:50 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CF74216A422 for ; Fri, 2 Jun 2006 10:34:50 +0000 (UTC) (envelope-from robin@reportlab.com) Received: from relay03.pair.com (relay03.pair.com [209.68.5.17]) by mx1.FreeBSD.org (Postfix) with SMTP id 545EE43D45 for ; Fri, 2 Jun 2006 10:34:50 +0000 (GMT) (envelope-from robin@reportlab.com) Received: (qmail 41460 invoked from network); 2 Jun 2006 10:34:48 -0000 Received: from unknown (HELO ?192.168.0.3?) (unknown) by unknown with SMTP; 2 Jun 2006 10:34:48 -0000 X-pair-Authenticated: 217.196.247.135 Message-ID: <44801448.50009@chamonix.reportlab.co.uk> Date: Fri, 02 Jun 2006 11:34:48 +0100 From: Robin Becker User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org References: <44800F1D.50100@chamonix.reportlab.co.uk> In-Reply-To: <44800F1D.50100@chamonix.reportlab.co.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:34:51 -0000 Robin Becker wrote: > I am trying to use qpopper for delivering mail to my PC based mail > client from a freeBSD 6.0 release system > > -ERR [AUTH] "root": access denied. > whoops hit the wrong key too soon. I have added user x and user root to the APOP data base, and have checked that user x can do pop3 with the client thunderbird. However, I get the above message for the root account. Is there some problem with root using APOP authentication? -- Robin Becker From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 10:45:06 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9F39316A437 for ; Fri, 2 Jun 2006 10:45:06 +0000 (UTC) (envelope-from robin@reportlab.com) Received: from relay03.pair.com (relay03.pair.com [209.68.5.17]) by mx1.FreeBSD.org (Postfix) with SMTP id 0FE2643D55 for ; Fri, 2 Jun 2006 10:45:05 +0000 (GMT) (envelope-from robin@reportlab.com) Received: (qmail 45623 invoked from network); 2 Jun 2006 10:45:04 -0000 Received: from unknown (HELO ?192.168.0.3?) (unknown) by unknown with SMTP; 2 Jun 2006 10:45:04 -0000 X-pair-Authenticated: 217.196.247.135 Message-ID: <448016B1.4000902@chamonix.reportlab.co.uk> Date: Fri, 02 Jun 2006 11:45:05 +0100 From: Robin Becker User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: Nils Vogels References: <44800F1D.50100@chamonix.reportlab.co.uk> <20060602121927.vuy4bm9haasw80cw@www.x-cons.nl> In-Reply-To: <20060602121927.vuy4bm9haasw80cw@www.x-cons.nl> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-questions@FreeBSD.org Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 10:45:16 -0000 Nils Vogels wrote: > On Fri, 02 Jun 2006 11:12:45 +0100, Robin Becker > wrote: > >> I am trying to use qpopper for delivering mail to my PC based mail >> client from a freeBSD 6.0 release system >> >> -ERR [AUTH] "root": access denied. >> > > Reading mail as root remotely is a Bad Idea (tm), because of > possible vulnerabilities. > > Try using your aliases(5) to redirect root mail to a user account instead. > > Oh, and don't log in as root either ;-) > > Greets, > > Nils. > > cleverly answered before my clarification :) This is within our firewall only. SSHD password login for the machine is off So I can log in only via the console or SSH with pre-shared keys. I have heard some reports about qpopper and security, but is it really so bad? -- Robin Becker From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 11:28:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E254116A42C for ; Fri, 2 Jun 2006 11:28:00 +0000 (UTC) (envelope-from Danovitsch@vitsch.net) Received: from amsfep15-int.chello.nl (amsfep17-int.chello.nl [213.46.243.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8B62143D53 for ; Fri, 2 Jun 2006 11:27:54 +0000 (GMT) (envelope-from Danovitsch@vitsch.net) Received: from Tuinhuisje.Vitsch.net ([80.57.146.63]) by amsfep15-int.chello.nl (InterMail vM.6.01.04.04 201-2131-118-104-20050224) with ESMTP id <20060602112752.KPZM10562.amsfep15-int.chello.nl@Tuinhuisje.Vitsch.net> for ; Fri, 2 Jun 2006 13:27:52 +0200 Received: from [192.168.87.6] (f23025.upc-f.chello.nl [80.56.23.25]) (authenticated bits=0) by Tuinhuisje.Vitsch.net (8.13.1/8.13.1) with ESMTP id k52BRl42030800 for ; Fri, 2 Jun 2006 13:27:47 +0200 (CEST) (envelope-from Danovitsch@vitsch.net) From: "Daan Vreeken [PA4DAN]" Organization: Vitsch Electronics To: freebsd-questions@freebsd.org Date: Fri, 2 Jun 2006 13:27:49 +0200 User-Agent: KMail/1.8.2 References: <44800F1D.50100@chamonix.reportlab.co.uk> <44801448.50009@chamonix.reportlab.co.uk> In-Reply-To: <44801448.50009@chamonix.reportlab.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606021327.49588.Danovitsch@vitsch.net> Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 11:28:09 -0000 On Friday 02 June 2006 12:34, Robin Becker wrote: > Robin Becker wrote: > > I am trying to use qpopper for delivering mail to my PC based mail > > client from a freeBSD 6.0 release system > > > > -ERR [AUTH] "root": access denied. > > whoops hit the wrong key too soon. > > I have added user x and user root to the APOP data base, and have checked > that user x can do pop3 with the client thunderbird. > > However, I get the above message for the root account. Is there some > problem with root using APOP authentication? Using pop3 to get root's email means you are sending root's login password in plain text to the pop3 server. It's unwise to change qpopper to allow you to login as root. Simply create a "normal" user and create a mail alias address so that all mail to root gets forwarded to the normal user. Then setup your mail client to login to pop3 using the username & passwd of the normal user. Setting up an alias is easy. Simply add the following line to /etc/aliases to forward root's email to normal_user : root: normal_user After editing the aliases file you should run "newaliases" to rebuild the alias database. grtz, Daan From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 11:42:15 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F93D16A422 for ; Fri, 2 Jun 2006 11:42:15 +0000 (UTC) (envelope-from robin@reportlab.com) Received: from relay00.pair.com (relay00.pair.com [209.68.5.9]) by mx1.FreeBSD.org (Postfix) with SMTP id 95C8643D58 for ; Fri, 2 Jun 2006 11:42:14 +0000 (GMT) (envelope-from robin@reportlab.com) Received: (qmail 65439 invoked from network); 2 Jun 2006 11:42:13 -0000 Received: from unknown (HELO ?192.168.0.3?) (unknown) by unknown with SMTP; 2 Jun 2006 11:42:13 -0000 X-pair-Authenticated: 217.196.247.135 Message-ID: <44802415.2030907@chamonix.reportlab.co.uk> Date: Fri, 02 Jun 2006 12:42:13 +0100 From: Robin Becker User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: "Daan Vreeken [PA4DAN]" , questions@freebsd.org References: <44800F1D.50100@chamonix.reportlab.co.uk> <44801448.50009@chamonix.reportlab.co.uk> <200606021328.31894.Danovitsch@vitsch.net> In-Reply-To: <200606021328.31894.Danovitsch@vitsch.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 11:42:15 -0000 Daan Vreeken [PA4DAN] wrote: > On Friday 02 June 2006 12:34, Robin Becker wrote: ....... > > Using pop3 to get root's email means you are sending root's login password in > plain text to the pop3 server. It's unwise to change qpopper to allow you to > login as root. I thought I was sending the APOP password only. > Simply create a "normal" user and create a mail alias address so that all mail > to root gets forwarded to the normal user. Then setup your mail client to > login to pop3 using the username & passwd of the normal user. > > Setting up an alias is easy. Simply add the following line to /etc/aliases to > forward root's email to normal_user : > root: normal_user > that's a good answer and will allow my despamming stuff to work on it. I was hoping to be able to clear the root mailbox as well. Is there an easy way to do that? In practice if I'm not trying to clear roots mbox, can I not just forward mail with root's .forward file? -- Robin Becker From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 12:37:23 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D3CCD16A781 for ; Fri, 2 Jun 2006 12:37:23 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail1.sea5.speakeasy.net (mail1.sea5.speakeasy.net [69.17.117.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7DD8443D45 for ; Fri, 2 Jun 2006 12:37:23 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 9538 invoked from network); 2 Jun 2006 12:37:22 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail1.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 2 Jun 2006 12:37:21 -0000 Received: by be-well.ilk.org (Postfix, from userid 0) id C32B028449; Fri, 2 Jun 2006 08:37:19 -0400 (EDT) To: Robin Becker References: <44800F1D.50100@chamonix.reportlab.co.uk> <44801448.50009@chamonix.reportlab.co.uk> <200606021328.31894.Danovitsch@vitsch.net> <44802415.2030907@chamonix.reportlab.co.uk> From: Charlie Root Date: Fri, 02 Jun 2006 08:37:19 -0400 In-Reply-To: <44802415.2030907@chamonix.reportlab.co.uk> (Robin Becker's message of "Fri, 02 Jun 2006 12:42:13 +0100") Message-ID: User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: questions@freebsd.org Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 12:37:31 -0000 Robin Becker writes: > that's a good answer and will allow my despamming stuff to work on > it. I was hoping to be able to clear the root mailbox as well. Is > there an easy way to do that? Procmail comes with a nice tool that can do that, called formail. For a one-time use, though, it's probably easier to just copy the mailbox file somewhere else and delete it. > In practice if I'm not trying to clear > roots mbox, can I not just forward mail with root's .forward file? Sure, it will work. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 12:42:01 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CFAFE16A43D for ; Fri, 2 Jun 2006 12:42:01 +0000 (UTC) (envelope-from ianchov@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.169]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8AE3343D46 for ; Fri, 2 Jun 2006 12:42:00 +0000 (GMT) (envelope-from ianchov@gmail.com) Received: by ug-out-1314.google.com with SMTP id m3so495094uge for ; Fri, 02 Jun 2006 05:41:59 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=r7yjc5+s8i/e5LdCarMPy0Abd/OwrtCg2fCnVdsMGJBkxQ2NvbFwbC0PCQU19/xJJDb0U7kAi8R7z0VowZre8UVwWFYU+dkCiOs+tza6aMVFHTuLmnWIUwKXJ3ihEfiy8lARXpMfaBsk1krN6Q2pv6Vra/LZ52ZHq8vYpW21WS8= Received: by 10.78.17.1 with SMTP id 1mr311922huq; Fri, 02 Jun 2006 05:41:59 -0700 (PDT) Received: by 10.78.39.6 with HTTP; Fri, 2 Jun 2006 05:41:59 -0700 (PDT) Message-ID: <18e02bd30606020541m4d91d388i2010ecb4fda33af3@mail.gmail.com> Date: Fri, 2 Jun 2006 15:41:59 +0300 From: "Iantcho Vassilev" To: "FreeBSD Mailing List" In-Reply-To: <20060601141326.1fdc0811@localhost> MIME-Version: 1.0 References: <447F3A1B.4030400@yourdot-mail.com> <20060601141326.1fdc0811@localhost> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: divx2dvd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 12:42:02 -0000 Search freshmeat.net There are some... devede is one of them On 6/1/06, Mark Kane wrote: > > On Thu, Jun 01, 2006, at 20:03:55 +0100, Carlos wrote: > > hi, > > > > someone know a program to convert a DivX to DVD file in gui? > > > > Hi. > > Try Avidemux. It's in ports at /usr/ports/multimedia/avidemux2 > > -Mark > > -- > Internet Radio: > Party107 (Trance/Electronic) - http://www.party107.com > Rock 101.9 The Edge (Rock) - http://www.rock1019.net > > IRC: > MIXXnet IRC Network - irc.mixxnet.net (Nick: MIXX941) > > GnuPG Public Key: > http://www.mkproductions.org/mk_pubkey.asc > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 12:42:05 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1972616A436 for ; Fri, 2 Jun 2006 12:42:05 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail7.sea5.speakeasy.net (mail7.sea5.speakeasy.net [69.17.117.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id B92F743D46 for ; Fri, 2 Jun 2006 12:42:04 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 21869 invoked from network); 2 Jun 2006 12:42:04 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail7.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 2 Jun 2006 12:42:03 -0000 Received: by be-well.ilk.org (Postfix, from userid 0) id A6BBF28449; Fri, 2 Jun 2006 08:42:02 -0400 (EDT) To: Frank Bonnet References: <447EB839.8070103@esiee.fr> From: Charlie Root Date: Fri, 02 Jun 2006 08:42:02 -0400 In-Reply-To: <447EB839.8070103@esiee.fr> (Frank Bonnet's message of "Thu, 01 Jun 2006 11:49:45 +0200") Message-ID: User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: limiting apache thru login.conf ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 12:42:06 -0000 Frank Bonnet writes: > I'm in troubles with a webmail using apache ( squirrelmail ) > that seems to eat a lot of ressources of the machine then > really slowing it down. > > Does anyone has tried to limit ressources "eaten" by apache > using the /etc/login.conf file for the www user ? > > The apache.sh launching script use the /usr/bin/limits command > but there is no special entry for the www user in login.conf > file . You could always create one, but I don't think it would help your case very much. There's no guarantee that squirrelmail's usage would be the part that got curbed. As a programmer, I would be more inclined to find and fix the problem. Short of that, periodically restarting the server would be the obvious approach. Using limits would help keep other (presumably more critical?) processes from being harmed by Apache's excesses... From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 13:31:17 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DAC6216A45C for ; Fri, 2 Jun 2006 13:31:17 +0000 (UTC) (envelope-from kdk@daleco.biz) Received: from ezekiel.daleco.biz (southernuniform.com [66.76.92.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 583C643D48 for ; Fri, 2 Jun 2006 13:31:17 +0000 (GMT) (envelope-from kdk@daleco.biz) Received: from [192.168.2.2] ([69.27.149.254]) by ezekiel.daleco.biz (8.13.4/8.13.1) with ESMTP id k52DTs7G058749; Fri, 2 Jun 2006 08:30:16 -0500 (CDT) (envelope-from kdk@daleco.biz) Message-ID: <44803D48.4040701@daleco.biz> Date: Fri, 02 Jun 2006 08:29:44 -0500 From: Kevin Kinsey User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.8.0.2) Gecko/20060509 SeaMonkey/1.0.1 MIME-Version: 1.0 To: Robin Becker References: <44800F1D.50100@chamonix.reportlab.co.uk> <44801448.50009@chamonix.reportlab.co.uk> <200606021328.31894.Danovitsch@vitsch.net> <44802415.2030907@chamonix.reportlab.co.uk> In-Reply-To: <44802415.2030907@chamonix.reportlab.co.uk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: "Daan Vreeken \[PA4DAN\]" , questions@freebsd.org Subject: Re: qpopper for root X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 13:31:21 -0000 Robin Becker wrote: > Daan Vreeken [PA4DAN] wrote: >> Simply create a "normal" user and create a mail alias address so that >> all mail to root gets forwarded to the normal user. Then setup your >> mail client to login to pop3 using the username & passwd of the normal >> user. >> >> Setting up an alias is easy. Simply add the following line to >> /etc/aliases to forward root's email to normal_user : >> root: normal_user >> > > that's a good answer and will allow my despamming stuff to work on it. I > was hoping to be able to clear the root mailbox as well. Is there an > easy way to do that? cat /dev/null > /var/mail/root would do the trick ;-) (#include disclaimer.h) More useful might be: cp /var/mail/me /var/mail/me.bak mv /var/mail/root /var/mail/me (download root mail via POP or whatever) mv /var/mail/me.bak /var/mail/me YMMV, of course. Kevin Kinsey -- Scenary is here, wish you were beautiful. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 14:06:52 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F359416A41F for ; Fri, 2 Jun 2006 14:06:51 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1E9DC43D46 for ; Fri, 2 Jun 2006 14:06:47 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id ABC8D2E029; Fri, 2 Jun 2006 16:06:39 +0200 (CEST) Message-ID: <448045DD.3070605@locolomo.org> Date: Fri, 02 Jun 2006 16:06:21 +0200 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Lamont Lucas References: <20060602025341.GH46634@clavin.cluepon.com> In-Reply-To: <20060602025341.GH46634@clavin.cluepon.com> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms030201090202080103060702" Cc: questions@freebsd.org Subject: Re: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 14:06:52 -0000 This is a cryptographically signed message in MIME format. --------------ms030201090202080103060702 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Lamont Lucas wrote: > I recently upgraded my jumpstart server from 5.5 to 6.1 and have had > some issues getting the new jumpstart process working. > > Specifically, while using my old install.cfg, my new machines were not > being built with a kernel. > > I figured out that the sysinstall manpage is out of date and as of 6.x > there is a new distribution that needs to be installed, named kernels. > > However, even after adding that: > > ################################ > # Select which distributions we want. > dists=base kernels manpages catpages proflibs dict > distSetCustom > ################################ If you do not have a "installCommit" at the end of your install.cfg the sysinstall should fall back on the normal interactive interface and you can verify that your settings have been applied. > the kernel was still not installed. It dosen't even look like sysinstall > attempted to process it, either. I'm going through the sysinstall > source to see if it's aware of kernels, but having no luck yet. > > Has anybody successfully used a 6.x machine to build a jumpstart > server? Is there a better source for automating sysinstall info than the > manpage? > > (I originally used the freebsd.org handbook site on pxeboot, but it > was horribly out of date (4.x) and later had more luck with > http://www.daemonsecurity.com/pub/pxeboot/article.html, which is > how I got my 5.5 machine working. I see it has been updated for > 6.x but uses a non-custom dist install set, which isn't exactly > what I want) Rather, it is being updated - it seems to be a continual process :-) let me know of useful cheats and tricks. Cheers, Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms030201090202080103060702 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMjE0MDYy M1owIwYJKoZIhvcNAQkEMRYEFOvBWLXR6AKTf7R8TJpD2nNmyCRRMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQA7DJ6L/uS/eFOFLer65v97IRPzw5j1 3THMTV0mIvQ0vUp1Gtr1jDdqvSEbizgFvP1lWIGZf//mWjJXWXz2BLulzH1ePGuQQXTD4euR +LejjXaKzN2Uq3/XYA05BCZoP2654Vkbb8XV68wNYqZpCWm9Em0Ya0HxdCQcZE1CawalvULu Bn2Jlzw/Kp5SBvVdBeht21cx4Vi6GYTLRXKlXcXdHQT8dPr5JUl5jDvtgEOX4sZZTTclHRv3 6sOmD/zrKdpZBZsRJD3NJL5eDmPwnqSd+xG4tbd5QLC5cJPYQFrSo9OQ5Z8TuVoLSoBLXijy 95N3W9fvju0cae/cSlIDgozlAAAAAAAA --------------ms030201090202080103060702-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 14:14:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D8F5A16A429 for ; Fri, 2 Jun 2006 14:14:43 +0000 (UTC) (envelope-from njt@ayvali.org) Received: from starfish.geekisp.com (starfish.geekisp.com [216.168.135.166]) by mx1.FreeBSD.org (Postfix) with ESMTP id 03C2A43D58 for ; Fri, 2 Jun 2006 14:14:42 +0000 (GMT) (envelope-from njt@ayvali.org) Received: (qmail 6512 invoked by uid 1003); 2 Jun 2006 14:14:41 -0000 Received: from clam.int.geekisp.com (HELO clam.geekisp.com) (192.168.4.38) by mail.geekisp.com with (DHE-RSA-AES256-SHA encrypted) SMTP; 2 Jun 2006 14:14:41 -0000 Received: from clam.geekisp.com (njt@localhost.geekisp.com [127.0.0.1]) by clam.geekisp.com (8.13.4/8.12.11) with ESMTP id k52EEc3X024442; Fri, 2 Jun 2006 10:14:38 -0400 (EDT) Received: (from njt@localhost) by clam.geekisp.com (8.13.4/8.13.3/Submit) id k52EEb56013966; Fri, 2 Jun 2006 10:14:38 -0400 (EDT) X-Authentication-Warning: clam.geekisp.com: njt set sender to njt@ayvali.org using -f Date: Fri, 2 Jun 2006 10:14:37 -0400 From: "N.J. Thomas" To: Lawrence Horvath Message-ID: <20060602141437.GE7621@ayvali.org> References: <20060530212241.GK3413@ayvali.org> <200605301630.45755.kirk@daycos.com> <20060531223706.GA4607@ayvali.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.9i Cc: freebsd-questions@freebsd.org Subject: Re: sudoedit, restricting to particular folder X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 14:14:44 -0000 * Lawrence Horvath [2006-06-01 22:13:39 -0700]: > well in that case what can uyou recommend for editing only zone files > and being able to run rndc, that is my main goal, i need to lock a > system so that only "rndc reload", "rndc reconfig" and editing zone > files is possible by a group of users, any suggestins? and/or how do > you do this? Restricting a group of users to run only "rndc reload" and "rndc reconfig" via sudo is trivial. sudoers(1) will explain how, and the sudoers file that comes with sudo is chock full of examples. Off the top of my head, you would do something like this: User_Alias DNSOPS = user1, user2, user3 Cmnd_Alias DNSRELOAD = /usr/sbin/rndc reload Cmnd_Alias DNSRECONF = /usr/sbin/rndc reconfig DNSOPS ALL = DNSRELOAD, DNSRECONF Don't know if that parses properly, but you get the idea. As far as editing only zone files, if you know the names of the files that they need to edit, something like this is sufficient: DNSOPS ALL = sudoedit /etc/named.conf DNSOPS ALL = sudoedit /etc/rndc.conf DNSOPS ALL = sudoedit /var/named/zone1 DNSOPS ALL = sudoedit /var/named/zone2 However, if your users need to be able to create/modify/rename files under /var/named (as you mentioned in your OP), then you will need a properly written wrapper script. Thomas -- N.J. Thomas njt@ayvali.org Etiamsi occiderit me, in ipso sperabo From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 14:49:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9F80916A47C for ; Fri, 2 Jun 2006 14:49:25 +0000 (UTC) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from mail.asarian-host.net (mail.asarian-host.net [194.109.160.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 71D0343D45 for ; Fri, 2 Jun 2006 14:49:24 +0000 (GMT) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from anonymizer.asarian-host.net (localhost [127.0.0.1]) (authenticated bits=0) by mail.asarian-host.net (8.13.5/8.13.5) with ESMTP id k52EnMew057483 for ; Fri, 2 Jun 2006 16:49:22 +0200 (CEST) (envelope-from admin@asarian-host.net) From: Mark Received-SPF: pass (asarian-host.net: 127.0.0.1 is authenticated by a trusted mechanism) receiver=anonymizer.asarian-host.net; client-ip=127.0.0.1; envelope-from=; helo=clientrunner.asarian-host.net; Message-Id: <200606021449.k52EnLYN057473@asarian-host.net> Date: Fri, 02 Jun 2006 14:49:22 GMT X-Authenticated-Sender: admin@asarian-host.net X-Trace: m3Iz2aXECr1rEbTF5u90orxZYWT+pd3puS5f5pa0X40gzWKXEG/t1YDz/0/iaD6x9P6xlT+4X8uwx64zDZkrAQ== X-Complaints-To: abuse@asarian-host.net X-Abuse-Info: Please be sure to forward a copy of ALL headers, otherwise we are unable to process your complaint Organization: Asarian-host To: "'FreeBSD-Questions Questions'" MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Auth: Asarian-host PGP signature iQEVAwUARIBP8jFqW1BleBN9AQHMCwf/XCrsRTmFGgF6xCvgHPEovfLvc34Ji9eW A8Aer/ArKl+5xl2JJCgygY6DAmJMrYv5SQtUUrVqsuTgtT++V4an9P9KqPfeCcyX 9CSkoAX2kx5HVkH8b/yZcy2rr/dWq+XBOJZ8Ughk8FABKIdBLTT0ksTiZFn+j5cR 5C1XLg0DgAeqlJ/AZNWxXONHLsWHOqJr6/evbSUMB4YuxpF7nalRRoETGTybVFz1 ZBO+WBCu/AFmT4pZhIl9wfWM0mgKX71oyCsTzKsv0FbEheHake9NSZpB3KtUc7hs xHypsZw8iPgKPGiHIl8wpnYjJc1aytGtvGlIQ9ldkkm20eXbc2ywww== =rrPd Subject: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 14:49:34 -0000 Hello, I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe motherboard. I am thinking about de K8V-X SE. However, instead of the 8237 chipset, it has the 8237R. Is that supported in FreeBSD 4.11 stable as well? Also, instead of the Gigabyte LAN, it has a Realtek 8201CL D version LAN. Will that work, too? I can, for the life of me, no longer find a link on the new FreeBSD site (like http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html#DISK, for instance). If anyone could tell me where the page is at, or knows the answer, I'd really appreciate it. Much obliged, - Mark From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 14:57:24 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F22E16A52E; Fri, 2 Jun 2006 14:57:24 +0000 (UTC) (envelope-from emin@mccme.ru) Received: from ns.mccme.ru (ns.mccme.ru [62.117.108.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 710EB43D46; Fri, 2 Jun 2006 14:57:21 +0000 (GMT) (envelope-from emin@mccme.ru) Received: from mccme.ru (mccme.ru [62.117.108.7]) by ns.mccme.ru (8.13.3/8.13.3) with ESMTP id k52F8AHu062441 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Fri, 2 Jun 2006 19:08:10 +0400 (MSD) (envelope-from emin@mccme.ru) Received: from mccme.ru (localhost.mccme.ru [127.0.0.1]) by mccme.ru (8.13.5/8.13.5) with SMTP id k52ExEr5011609; Fri, 2 Jun 2006 18:59:14 +0400 Date: Fri, 2 Jun 2006 18:59:09 +0400 From: "Eugene M. Minkovskii" To: Andrew Pantyukhin Message-ID: <20060602145909.GA11432@mccme.ru> References: <20060601111305.GA6660@mccme.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: Organization: MCCME Moscow User-Agent: Mutt/1.5.11 X-MCCME-Spam: No, score=0 required=5 tests= Cc: questions@freebsd.org Subject: Re: bug in tcpdump? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 14:57:36 -0000 On Thu, Jun 01, 2006 at 09:15:52PM +0400, Andrew Pantyukhin wrote: " On 6/1/06, Eugene M. Minkovskii wrote: " >It seems to me that I see a bug in tcpdump(1): option -A working " >same as -x and don't produce ASCII output. " " ðÏÐÒÏÂÕÊ ÔÁË: tcpdump -npx -i iface " Thank you, but I don't need a solution. If this is a bug, I'll wrote a pr, If I mistaken, I don't wrote pr. -- Sensory yours, Eugene Minkovskii óÅÎÓÏÒÎÏ ×ÁÛ, å×ÇÅÎÉÊ íÉÎØËÏ×ÓËÉÊ From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 15:01:57 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A708716A4AC for ; Fri, 2 Jun 2006 15:01:57 +0000 (UTC) (envelope-from erikt@owl.midgard.homeip.net) Received: from pne-smtpout1-sn2.hy.skanova.net (pne-smtpout1-sn2.hy.skanova.net [81.228.8.83]) by mx1.FreeBSD.org (Postfix) with ESMTP id 48E8E43D5D for ; Fri, 2 Jun 2006 15:01:53 +0000 (GMT) (envelope-from erikt@owl.midgard.homeip.net) Received: from falcon.midgard.homeip.net (83.253.29.241) by pne-smtpout1-sn2.hy.skanova.net (7.2.072.1) id 447D5056000BAE0A for freebsd-questions@freebsd.org; Fri, 2 Jun 2006 17:01:52 +0200 Received: (qmail 49859 invoked from network); 2 Jun 2006 17:01:50 +0200 Received: from owl.midgard.homeip.net (10.1.5.7) by falcon.midgard.homeip.net with SMTP; 2 Jun 2006 17:01:50 +0200 Received: (qmail 67429 invoked by uid 1001); 2 Jun 2006 17:01:50 +0200 Date: Fri, 2 Jun 2006 17:01:50 +0200 From: Erik Trulsson To: Mark Message-ID: <20060602150150.GA67346@owl.midgard.homeip.net> Mail-Followup-To: Mark , 'FreeBSD-Questions Questions' References: <200606021449.k52EnLYN057473@asarian-host.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200606021449.k52EnLYN057473@asarian-host.net> User-Agent: Mutt/1.5.11 Cc: 'FreeBSD-Questions Questions' Subject: Re: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 15:01:57 -0000 On Fri, Jun 02, 2006 at 02:49:22PM +0000, Mark wrote: > > Hello, > > I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe > motherboard. I am thinking about de K8V-X SE. However, instead of the 8237 > chipset, it has the 8237R. Is that supported in FreeBSD 4.11 stable as > well? As I understand it, there is very little difference between the VIA 8237 and the VIA 8237R. If an OS works on one of them, it should work on the other as well. > Also, instead of the Gigabyte LAN, it has a Realtek 8201CL D version > LAN. Will that work, too? I can, for the life of me, no longer find a link > on the new FreeBSD site (like > http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html#DISK, for > instance). If anyone could tell me where the page is at, or knows the > answer, I'd really appreciate it. I am not familiar with the ethernet controller, and don't know if it is supported by any version of FreeBSD, but the page you are looking for is probably http://www.freebsd.org/relnotes/4-STABLE/hardware/i386/index.html -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 15:11:23 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F29B616A5A2 for ; Fri, 2 Jun 2006 15:11:23 +0000 (UTC) (envelope-from shiemstra@h2.com) Received: from hermes.h2web.com (mx1.h2web.com [67.132.72.11]) by mx1.FreeBSD.org (Postfix) with SMTP id B087043D5D for ; Fri, 2 Jun 2006 15:11:22 +0000 (GMT) (envelope-from shiemstra@h2.com) Received: (qmail 33853 invoked by uid 1011); 2 Jun 2006 11:11:21 -0400 Received: from unknown (HELO hanky) (192.168.1.3) by hermes.h2web.com with SMTP; 2 Jun 2006 11:11:21 -0400 From: "Scott Hiemstra" To: "'FreeBSD-Questions Questions'" Date: Fri, 2 Jun 2006 11:13:40 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: <200606021449.k52EnLYN057473@asarian-host.net> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaGU/LERi4a/3m6RLKbpotgohmvLAAAQG/g Message-Id: <20060602151122.B087043D5D@mx1.FreeBSD.org> Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 15:11:34 -0000 > I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe > motherboard. I am thinking about de K8V-X SE. However, > instead of the 8237 > chipset, it has the 8237R. Is that supported in FreeBSD 4.11 stable as > well? Also, instead of the Gigabyte LAN, it has a Realtek > 8201CL D version > LAN. Will that work, too? I can, for the life of me, no > longer find a link > on the new FreeBSD site (like > http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html > #DISK, for > instance). If anyone could tell me where the page is at, or knows the > answer, I'd really appreciate it. I have the same board in a server running 4.11 (FreeBSD 4.11-STABLE #0) and no problems to report. The nic is detected as "RealTek 8129/8139" but seems to function just fine. I would recommend building a temporary system, doing an install and then once you verify all is well... Swap the board into your existing machine. In regards to the hardware page, you can find it here: ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/i386/4.11-REL EASE/HARDWARE.HTM Scott From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 15:28:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E40416A427 for ; Fri, 2 Jun 2006 15:28:19 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33303.mail.mud.yahoo.com (web33303.mail.mud.yahoo.com [68.142.206.118]) by mx1.FreeBSD.org (Postfix) with SMTP id EC1F343D46 for ; Fri, 2 Jun 2006 15:28:18 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 20976 invoked by uid 60001); 2 Jun 2006 15:28:18 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=ve+EgZjRVQV+uo7URRYYRCb+OhuNreG/ajkMnOnVAG/tMqxwabYVfYX5zNTNwRfoyDfDE955G4tC3v0kM2KL3WVNSOd1y8ivZassxmEI38WLzFXCWu2oTXFXNu0pLlz0RFfF2xV1pJiteG+IQk+/Gw8Z/Tnj6UnQEPpRs4JtJNo= ; Message-ID: <20060602152818.20974.qmail@web33303.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33303.mail.mud.yahoo.com via HTTP; Fri, 02 Jun 2006 08:28:18 PDT Date: Fri, 2 Jun 2006 08:28:18 -0700 (PDT) From: Danial Thom To: Scott Hiemstra , 'FreeBSD-Questions Questions' In-Reply-To: <20060602151122.B087043D5D@mx1.FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 15:28:19 -0000 --- Scott Hiemstra wrote: > > I run FreeBSD 4.11 stable, and I need to > replace my ASUS K8V Deluxe > > motherboard. I am thinking about de K8V-X SE. > However, > > instead of the 8237 > > chipset, it has the 8237R. Is that supported > in FreeBSD 4.11 stable as > > well? Also, instead of the Gigabyte LAN, it > has a Realtek > > 8201CL D version > > LAN. Will that work, too? I can, for the life > of me, no > > longer find a link > > on the new FreeBSD site (like > > > http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html > > #DISK, for > > instance). If anyone could tell me where the > page is at, or knows the > > answer, I'd really appreciate it. > > > I have the same board in a server running 4.11 > (FreeBSD 4.11-STABLE #0) and > no problems to report. The nic is detected as > "RealTek 8129/8139" but seems > to function just fine. I would recommend > building a temporary system, doing > an install and then once you verify all is > well... Swap the board into your > existing machine. Did you say you are running a server? That MB is only suitable for desktop use, as it has the slowest ethernet controller known to man on a 32/33Mhz bus. Running this MB as a server is like putting cheap, skinny tires on your porsche. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 15:50:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9E23F16A422 for ; Fri, 2 Jun 2006 15:50:42 +0000 (UTC) (envelope-from iqgrande@gmail.com) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.232]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1BE5C43D48 for ; Fri, 2 Jun 2006 15:50:41 +0000 (GMT) (envelope-from iqgrande@gmail.com) Received: by wr-out-0506.google.com with SMTP id 70so548745wra for ; Fri, 02 Jun 2006 08:50:41 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:mime-version:content-transfer-encoding:message-id:content-type:to:from:subject:date:x-mailer; b=B+EB3ilHsF8Ed5VBRykQSnIQihBLykTabJJbciUVPTlcwNQMuZeJDq9m2+EdfuNc2ty7cUpVSOOcRgozJHKooxDqTDvG0QR25mRI+pJj+tC64CrLfDoI+mwLrefey6nldbzILpqIZPgTdFqmnc6/eYQ3miJZDH7yLfRcc53rTwo= Received: by 10.54.127.4 with SMTP id z4mr1952167wrc; Fri, 02 Jun 2006 08:50:41 -0700 (PDT) Received: from ?192.168.0.5? ( [67.191.189.255]) by mx.gmail.com with ESMTP id 40sm3140518wrl.2006.06.02.08.50.38; Fri, 02 Jun 2006 08:50:38 -0700 (PDT) Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: freebsd-questions@freebsd.org From: Anthony Agelastos Date: Fri, 2 Jun 2006 11:50:35 -0400 X-Mailer: Apple Mail (2.750) Subject: GNUstep Initialization Problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 15:50:42 -0000 Hello, ### Problem ### On bootup, my machine displays the following text: Local package initialization:/libexec/ld-elf.so.1: Shared object "libobjc.so.1" not found, required by "gdnc" I believe this to be a problem with GNUstep or one of its dependencies. Does anyone have any ideas? Thank you all so much for your assistance with this. ### Attempts at Fixing Issues ### This problem seems very familiar to me (as if I have seen its solution before or it plagued me sometime in the past and the list helped me fix it). Anyways, I could not find much help. If I missed something, I do apologize. However, I found http://wiki.gnustep.org/index.php/Platform_compatibility#FreeBSD which mentioned that some dependencies may not have built. I went through their list and did a `portupgrade -f ` on each of those items (after doing a pkg_delete on gnustep*) and then re-installed GNUstep and the problem persists. ### Machine Information ### I am running 6.1-STABLE %uname -a FreeBSD dell.home.iq 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat May 13 01:04:32 EDT 2006 root@dell.home.iq:/usr/obj/usr/src/sys/ IQKERNEL i386 %cat rc.conf hostname="dell.home.iq" ifconfig_vr0="DHCP" nfs_server_enable="YES" mountd_flags="-r" linux_enable="YES" usbd_enable="YES" moused_enable="YES" moused_port="/dev/psm0" moused_type="auto" rpcbind_enable="YES" sshd_enable="YES" inetd_enable="YES" saver="daemon" cupsd_enable="YES" compat4x_enable="YES" compat5x_enable="YES" firewall_enable="YES" firewall_logging="YES" firewall_script="/etc/ipfw.rules" %cat make.conf CPUTYPE?=pentium3 CFLAGS= -O -pipe CXXFLAGS+= -fconserve-space NO_LPR= # do not build lpr and related programs NO_PROFILE=true # Avoid compiling profiled libraries CUPS_OVERWRITE_BASE=yes WITH_MOZILLA=firefox # added by use.perl 2006-05-06 21:05:37 PERL_VER=5.8.8 PERL_VERSION=5.8.8 From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 16:17:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E5AA016A420 for ; Fri, 2 Jun 2006 16:17:29 +0000 (UTC) (envelope-from shiemstra@h2.com) Received: from hermes.h2web.com (mx1.h2web.com [67.132.72.11]) by mx1.FreeBSD.org (Postfix) with SMTP id 5873543D45 for ; Fri, 2 Jun 2006 16:17:29 +0000 (GMT) (envelope-from shiemstra@h2.com) Received: (qmail 40983 invoked by uid 1011); 2 Jun 2006 12:17:28 -0400 Received: from unknown (HELO hanky) (192.168.1.3) by hermes.h2web.com with SMTP; 2 Jun 2006 12:17:28 -0400 From: "Scott Hiemstra" To: "'FreeBSD-Questions Questions'" Date: Fri, 2 Jun 2006 12:19:51 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: <20060602152818.20974.qmail@web33303.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 Thread-Index: AcaGWS4Vo8W2U5iiRQaOmGe9qvP7NgAAJNmw Message-Id: <20060602161729.5873543D45@mx1.FreeBSD.org> Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 16:17:30 -0000 > Did you say you are running a server? That MB is > only suitable for desktop use, as it has the > slowest ethernet controller known to man on a > 32/33Mhz bus. Running this MB as a server is like > putting cheap, skinny tires on your porsche. > > DT Personaly, I appreciate your dedication to maximum performance but please notice this thread is in reference to swapping a MB for another MB and coments like yours are not appreciated. Would you prefer if I had stated? "I have the same board in a crappy server running 4.11 (FreeBSD 4.11-STABLE #0) and no problems to report." Please notice I never said what the box was doing nor did I ask for your opinion of what MB/NIC I use in my systems. This SERVER is purpose built and runs stable 24/7 as a low volume outbound mail server so the performance of the NIC is not my primary concern. Please keep your useless comments to yourself as they do nothing but waste disk space, CPU time and the valuable time of people who attempt to help others on this list. Scott From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 16:27:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43D3716A433 for ; Fri, 2 Jun 2006 16:27:19 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33307.mail.mud.yahoo.com (web33307.mail.mud.yahoo.com [68.142.206.122]) by mx1.FreeBSD.org (Postfix) with SMTP id 5DFD043D45 for ; Fri, 2 Jun 2006 16:27:13 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 51105 invoked by uid 60001); 2 Jun 2006 16:27:12 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=Vq9533WkTu5eDYY3jiWCPoIExW4DvA4qLdNxul9APpVTs4d3mGsKSs5tl5iHKlzoTAt7vv6QKf5byt9wyLmSmEJTq9PpiFKgLGQFmfelvIr/K4j4PfJJO29McqV0q4BlFXcJNo0dEuDFRIsnHFcE59HA5Y40W7/M+0XktnvP+7M= ; Message-ID: <20060602162712.51103.qmail@web33307.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33307.mail.mud.yahoo.com via HTTP; Fri, 02 Jun 2006 09:27:12 PDT Date: Fri, 2 Jun 2006 09:27:12 -0700 (PDT) From: Danial Thom To: Scott Hiemstra , 'FreeBSD-Questions Questions' In-Reply-To: <20060602161729.5873543D45@mx1.FreeBSD.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 16:27:21 -0000 --- Scott Hiemstra wrote: > > Did you say you are running a server? That MB > is > > only suitable for desktop use, as it has the > > slowest ethernet controller known to man on a > > 32/33Mhz bus. Running this MB as a server is > like > > putting cheap, skinny tires on your porsche. > > > > DT > > Personaly, I appreciate your dedication to > maximum performance but please > notice this thread is in reference to swapping > a MB for another MB and > coments like yours are not appreciated. > > Would you prefer if I had stated? > > "I have the same board in a crappy server > running 4.11 (FreeBSD 4.11-STABLE > #0) and no problems to report." > > Please notice I never said what the box was > doing nor did I ask for your > opinion of what MB/NIC I use in my systems. > This SERVER is purpose built > and runs stable 24/7 as a low volume outbound > mail server so the performance > of the NIC is not my primary concern. Please > keep your useless comments to > yourself as they do nothing but waste disk > space, CPU time and the valuable > time of people who attempt to help others on > this list. > > Scott So if someone is planning on using a crappy motherboard as a server its not appropriate to mention that the replacement is not suitable for the task? So since you're replacing the MB, why not take the opportunity to use something suitable. You're buying a motherboard that uses an expensive CPU, supposedly for its performance, yet you completely ignore the other components on the MB that degrade the usefulness of the CPU. It makes no sense. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 16:44:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D030516A423 for ; Fri, 2 Jun 2006 16:44:13 +0000 (UTC) (envelope-from hernan.silberman@gmail.com) Received: from wx-out-0102.google.com (wx-out-0102.google.com [66.249.82.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1D11C43D49 for ; Fri, 2 Jun 2006 16:44:13 +0000 (GMT) (envelope-from hernan.silberman@gmail.com) Received: by wx-out-0102.google.com with SMTP id i31so394002wxd for ; Fri, 02 Jun 2006 09:44:12 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=ng/7e/YK90XAC4waZpQh+Imc6tzinhZAFlDAlZIquucKDtHXLM83ofrIlxXYfVHvbRERk4FQ0B/U4/adI7VFon1xWWrBgg0mFJ4GQXrc7llaAjN5zTxbPpFwkVha7EdVsNjVAIrqway22z9svbUFWJ/o6qXEBwa2g4L14qxQt38= Received: by 10.70.6.1 with SMTP id 1mr2669187wxf; Fri, 02 Jun 2006 09:44:12 -0700 (PDT) Received: by 10.70.53.2 with HTTP; Fri, 2 Jun 2006 09:44:12 -0700 (PDT) Message-ID: <9b9d376a0606020944j1d6ff4farf553983fe4d421f8@mail.gmail.com> Date: Fri, 2 Jun 2006 09:44:12 -0700 From: hernan To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: [freebsd-questions] emacs && xemacs? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 16:44:13 -0000 Hi folks, I have the xemacs port installed and I would also like to have the normal emacs port installed. When I try to 'make clean install' /usr/ports/editors/emacs it builds fine but fails to install because of xemacs, I'm at work now but the error was something to the effect that they both conflict and install files into the same place. I'm running FreeBSD 6.0 RELEASE, with a recent portupgrade so things are fairly up to date. I'm trying to install emacs 21.3_9 and have xemacs 21.4.19 installed already. Any insights appreciated, thanks! h From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 16:48:41 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2E6D716A454 for ; Fri, 2 Jun 2006 16:48:41 +0000 (UTC) (envelope-from smithi@nimnet.asn.au) Received: from gaia.nimnet.asn.au (nimbin.lnk.telstra.net [139.130.45.143]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9A88D43D7C for ; Fri, 2 Jun 2006 16:48:30 +0000 (GMT) (envelope-from smithi@nimnet.asn.au) Received: from localhost (smithi@localhost) by gaia.nimnet.asn.au (8.8.8/8.8.8R1.4) with SMTP id CAA14776; Sat, 3 Jun 2006 02:48:19 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Sat, 3 Jun 2006 02:48:18 +1000 (EST) From: Ian Smith To: Matthew Seaman In-Reply-To: <4479DD56.3040306@infracaninophile.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: questions@freebsd.org Subject: Re: phpMyAdmin problem - no Edit/Delete on Browse X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 16:48:41 -0000 On Sun, 28 May 2006 at 18:26:46 +0100, Matthew Seaman wrote: > Ian Smith wrote: > > On Sun, 28 May 2006, Matthew Seaman wrote: > > > Ian Smith wrote: > > > > running 5.4-RELEASE and installed phpMyAdmin 2.6.1.3 with pkg_add -r > > [..] > > You would be well advised to upgrade to the latest phpMyAdmin, which is > version 2.8.1, and is in the current ports. There are a number of security > problems that affect many earlier versions. If you look at the list of > security announcements at http://www.phpmyadmin.net/home_page/security.php > then with version 2.6.1pl3 you're potentially vulnerable to anything announced > after PMASA-2005-1 It's good advice for sure, however not practicable at the moment. As I said, this laptop is not net-accessible, and I just needed to get a job done. According to the requirement list, I'd have to update php, expat, mysql version! - surely a case of the tail wagging the dog? - and even xorg, pretty much everything. Not really doable on a 28.8k modem link. So, given my broadband application is on 'hold' awaiting local enabling which might take months, I'm going for a 6.1 4-CD set as soon as they're available; packages and/or distfiles is really the only way to go for those (still many) parts of the planet without fast, cheap connections. > > Think I'll start again with the installed config. I really can't recall > > if this problem was there since installation, but as mentioned all other > > import/export, create/drop/copy database/table, adding rows etc all just > > works well so far, excepting edit/delete availability on browse. I did start again from scratch; no difference. Still can't believe that such a show-stopper bug wouldn't have obviously affected many phpmyadmin users on 5.4 - people do use it to edit records, don't they? - so still have to suspect some local config issue. Tried another browser and all. > I have a vague memory that I've seen something like this mentioned as a > bugfix in the release notes for phpMyAdmin, but I can't put my finger on > exactly where. You can see the release notes for most phpMyAdmin versions > here: > > https://sourceforge.net/project/showfiles.php?group_id=23067&package_id=16462 > > but the formatting is all wrong before the 2.8.x series. Yes, read every one since 2.6.1; nothing that struck me as even similar. Anyway, thankyou Matthew for your helpful advice and clues. Cheers, Ian From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 17:02:00 2006 Return-Path: X-Original-To: FreeBSD-questions@FreeBSD.org Delivered-To: FreeBSD-questions@FreeBSD.org Received: by hub.freebsd.org (Postfix, from userid 645) id 86FEA16A432; Fri, 2 Jun 2006 17:02:00 +0000 (UTC) To: FreeBSD-questions@FreeBSD.org Message-Id: <20060602170200.86FEA16A432@hub.freebsd.org> Date: Fri, 2 Jun 2006 17:02:00 +0000 (UTC) From: grog@FreeBSD.ORG (Greg Lehey) Cc: Subject: How to get best results from FreeBSD-questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 17:02:01 -0000 How to get the best results from FreeBSD questions. =================================================== Last update $Date: 2005/08/10 02:21:44 $ This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from freebsd-questions-request@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions@freebsd.org mailing list! If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: http://lists.freebsd.org/mailman/options/freebsd-questions/me@me.org (obviously, substitute your mail address for "me@me.org"). You can also make such adjustments via email by sending a message to: freebsd-questions-request@freebsd.org with the word 'help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. Normally, Mailman will remind you of your freebsd.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you. Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as grog@lemis.de. Since then, I have changed it to grog@lemis.com. If I were to try to remove grog@lemis.com from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.org, and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions or -hackers? ========================================= Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In some cases, it's not really clear which group you should ask. The following criteria should help for 99% of all questions, however: If the question is of a general nature, first check whether this isn't a Frequently Asked Question (FAQ). There's a list of these questions at http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/index.html, and also on your own system (once you've installed it) at /usr/share/doc/en/books/faq/index.html. Check there, and if you don't find an answer, ask FreeBSD-questions. Examples might be questions about installing FreeBSD or the use of a particular UNIX utility. If you think the question relates to a bug, but you're not sure, or you don't know how to look for it, send the message to FreeBSD-questions. If the question relates to a bug, and you're almost sure that it's a bug (for example, you can pinpoint the place in the code where it happens, and you maybe have a fix), then send the message to FreeBSD-hackers. You should also enter a problem report with the send-pr utility. If the question relates to enhancements to FreeBSD, and you can make suggestions about how to implement them, then send the message to FreeBSD-hackers. If the question is of particularly technical nature, such as implementation details or suggestions for improvements, then send the message to FreeBSD-hackers. There are also a number of other specialized mailing lists, for example FreeBSD-isp, which caters to the interests of ISPs (Internet Service Providers) who run FreeBSD. If you happen to be an ISP, this doesn't mean you should automatically send your questions to FreeBSD-isp. The criteria above still apply, and it's in your interest to stick to them, since you're more likely to get good results that way. IV: How to submit a question ============================= When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer even if you follow these rules. It's much more possible to not get an answer if you don't. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. ``FreeBSD problem'' or ``Help'' aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. When sending a new message, well, send a new message. Don't reply to some other message, erase the old content and change the subject line. That leaves an In-reply-to: header which many mail readers use to thread messages, so your message shows up as a reply to some other message. People often delete messages a whole thread at a time, so apart from irritating people, you also run a chance of having the message deleted unread. 4. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers or badly configured mailers. The following mailers are known to send out badly formatted messages without you finding out about them: Eudora exmh Microsoft Exchange Microsoft Internet Mail Microsoft Outlook Netscape As you can see, the mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. For further information on this subject, check out http://www.lemis.com/email.html. 5. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 6. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 7. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: If you get error messages, don't say ``I get error messages'', say (for example) ``I get the error message 'No route to host'''. If your system panics, don't say ``My system panicked'', say (for example) ``my system panicked with the message 'free vnode isn't'''. If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. If you have difficulty getting PPP to run, describe the configuration. Which version of PPP do you use? What kind of authentication do you have? Do you have a static or dynamic IP address? What kind of messages do you get in the log file? 8. If you don't get an answer immediately, or if you don't even see your own message appear on the list immediately, don't resend the message. Wait at least 24 hours. The FreeBSD mailer offloads messages to a number of subordinate mailers around the world, and sometimes it can take several hours for the mail to get through. And once it gets through, the one person who might know the answer will probably just have gone to bed in his part of the world. 9. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question (yes, it's the same one in each case :-). You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- V: How to follow up to a question ================================= Often you will want to send in additional information to a question you have already sent. The best way to do this is to reply to your original message. This has three advantages: 1. You include the original message text, so people will know what you're talking about. Don't forget to trim unnecessary text out, though. 2. The text in the subject line stays the same (you did remember to put one in, didn't you?). Many mailers will sort messages by subject. This helps group messages together. 3. The message reference numbers in the header will refer to the previous message. Some mailers, such as mutt, can thread messages, showing the exact relationships between the messages. VI: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure you understand the question? Very frequently, the person who asks the question is confused or doesn't express himself very well. Even with the best understanding of the system, it's easy to send a reply which doesn't answer the question. This doesn't help: you'll leave the person who submitted the question more frustrated or confused than ever. If nobody else answers, and you're not too sure either, you can always ask for more information. 5. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 6. Unless there's a good reason to do otherwise, reply to the sender and to FreeBSD-questions. Many people on the FreeBSD-questions are "lurkers": they learn by reading messages sent and replied to by others. If you take a message which is of general interest off the list, you're depriving these people of their information. Be careful with group replies; lots of people send messages with hundreds of CCs. If this is the case, be sure to trim the Cc: lines appropriately. 7. Include relevant text from the original message. Trim it to the minimum, but don't overdo it. It should still be possible for somebody who didn't read the original message to understand what you're talking about. 8. Use some technique to identify which text came from the original message, and which text you add. I personally find that prepending ``> '' to the original message works best. Leaving white space after the ``> '' and leave empty lines between your text and the original text both make the result more readable. 9. Put your response in the correct place (after the text to which it replies). It's very difficult to read a thread of responses where each reply comes before the text to which it replies. 10. Most mailers change the subject line on a reply by prepending a text such as ``Re: ''. If your mailer doesn't do it automatically, you should do it manually. 11. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), please fix it. In the case of an incorrect subject line (such as ``HELP!!??''), change the subject line to (say) ``Re: Difficulties with sync PPP (was: HELP!!??)''. That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. $Id: Howto-ask-questions,v 1.6 2005/08/10 02:21:44 grog Exp $ _______________________________________________ Thanks to Josh Paetzel for updating this document to describe mailman. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 17:02:04 2006 Return-Path: X-Original-To: FreeBSD-questions@FreeBSD.org Delivered-To: FreeBSD-questions@FreeBSD.org Received: by hub.freebsd.org (Postfix, from userid 645) id D84B616A434; Fri, 2 Jun 2006 17:02:00 +0000 (UTC) To: FreeBSD-questions@FreeBSD.org Message-Id: <20060602170200.D84B616A434@hub.freebsd.org> Date: Fri, 2 Jun 2006 17:02:00 +0000 (UTC) From: grog@FreeBSD.ORG (Greg Lehey) Cc: Subject: "The Complete FreeBSD": errata and addenda X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 17:02:06 -0000 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, The Complete FreeBSD, published by O'Reilly, is no exception. Inevitably, a number of bugs and changes have surfaced. "The Complete FreeBSD" has been through a total of five editions, including its predecessor "Installing and Running FreeBSD". Two of these have been reprinted with corrections. I maintain a series of errata pages. Start at http://www.lemis.com/errata-4.html to find out how to get the errata information. Note also that the book has now been released for free download in PDF form. Instead of downloading the changed pages, you may prefer to download the entire book. See http://www.lemis.com/grog/Documentation/CFBSD/ for more information. Have you found a problem with the book, or maybe something confusing? Please let me know: I'm no longer constantly updating it, but I may be able to help Greg From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 17:08:20 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 278F316A438 for ; Fri, 2 Jun 2006 17:08:20 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33307.mail.mud.yahoo.com (web33307.mail.mud.yahoo.com [68.142.206.122]) by mx1.FreeBSD.org (Postfix) with SMTP id B1F3843D48 for ; Fri, 2 Jun 2006 17:08:19 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 68094 invoked by uid 60001); 2 Jun 2006 17:08:19 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=3DxxVng/t2UqwOnXid3+G/BjS2o3vxIulJPw2/DeZmT87DOZJsDJJk+ikOimnRRzbilLxSDuMCXL+XIpDDVtKcd7qLX7MYDY1iwdlEzjvJRvrj2N4Sk63xPwy0w6OWz9ucHL2jYD4PVfMMk+i6iBZjIVDCPZdCCumgW3uAY1u2M= ; Message-ID: <20060602170819.68092.qmail@web33307.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33307.mail.mud.yahoo.com via HTTP; Fri, 02 Jun 2006 10:08:19 PDT Date: Fri, 2 Jun 2006 10:08:19 -0700 (PDT) From: Danial Thom To: Ted Mittelstaedt , Chuck Swiger In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@freebsd.org Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 17:08:20 -0000 --- Ted Mittelstaedt wrote: > > > >-----Original Message----- > >From: owner-freebsd-questions@freebsd.org > >[mailto:owner-freebsd-questions@freebsd.org]On > Behalf Of Chuck Swiger > >Sent: Thursday, June 01, 2006 8:24 AM > >To: danial_thom@yahoo.com > >Cc: questions@freebsd.org > >Subject: Re: Recommendation for 1000BASE-SX > card? > > > > > > >Very well, let me put it another way: if your > opinions about > >what's wrong > >differ from most other people, you might do > better to rely on a > >discussion > >involving facts rather than opinions. > > Or, it could simply be that he's not doing what > most people > are doing, so he is going to run into trouble > that most people > don't run into. > > >I mention this because > >some people > >regard their own opinions so highly that they > don't seem to be > >aware that > >other approaches exist and might even prove > effective. > > > > Like you? > > >> Clearly there are drivers that are well > >> supported and drivers that aren't. There are > >> people out there trying to run their > businesses > >> and you seem to want to pretend that > everything > >> is just peachy and that everything can be > tweaked > >> and tuned a bit to be usable. > > > >I don't know about either the OP or your > situation(s), > > Then, pray tell, don't comment. Instead thank > your lucky stars > that you have not had to deal with that kind of > problem. > > > but I'm > >generally of > >the opinion that FreeBSD works just fine, most > of the time, on > >most hardware, > >without any specific tweaking or tuning to be > entirely usable. > > > > It does not. In reality, current versions of > FreeBSD work better > on current versions of hardware. FreeBSD has a > terrible history > of breaking things that used to work on old > hardware, then > when someone complains that something is > broken, the developers > in effect tell them their old hardware is > crappy junk and to buy new > hardware. > > Try running FreeBSD 6.X on a 80486 or Pentium > system. FreeBSD 4.11 > runs just fine on that hardware, if a bit > slowly. But, I don't need > speed to control my garden sprinklers. > > Now, it is true that sometimes backwards > compatibility can hurt you, > it can cause you to maintain interfaces and > structures that conflict > with support of new hardware, it can sometimes > put you into > situations that cannot be automatically > resolved, thus you have to > create a knob for the user to twaddle one way > or another, depending > on what hardware they have or what they want to > do. It can suck > off developer time to maintain old junk that > only a few people use, > instead of putting in support for new crap that > a lot of people use. > So there is a balance beam of too much > backwards compatability > and not enough of it. Microsoft is most > definitely way far on the > side of bending over backwards to support > everything, but most people > don't realize that FreeBSD is way far on the > other side of sacrificing > hardware support at the drop of a hat when > people lose interest > in it. > > >That's true of some other platforms, such as > Apple hardware and > >MacOS X, or > >even Sun/SPARC boxes, as well. YMMV. > > > > Total apples and oranges comparison, not > relevant to anything. > > >If you have specific problems or a > FreeBSD-driver to Windows-driver > >performance comparison, providing #'s and > enough details to > >reproduce would be > >helpful. > > That has been done with the Broadcom driver > exhaustively in the > PR database, there's at least a dozen PRs on > problems related > to that chip. However it has not resulted in > much code to fix > the problem, or even interest among committers > to apply the fixes > that have been posted. So no, I don't think > that doing that > is helpful at all. In fact, I really think the > PR system has > gotten pretty much broken these days, there's > too many bugs and > not enough people working on them, and more > coming in every > day. > > What is needed is some developers putting some > time into > knocking down the bugs in the PR database, but > instead we have > the foundation dumping money into funding > students on projects > like "The Summer of Code" which basically ends > up creating a lot > of half-finished efforts that may or may not > eventually get > integrated into the operating system at some > point down the road. > > Nobody wants to fix other people's bugs, that's > boring stuff, > that is the one area of Open Source where > commercial software > companies have a leg up over us. A commercial > company can find > some starving programmer and pay him, then put > a manager over him to > keep jerking the paycheck string to keep him on > task to do the > icky programming. Open Source has real > difficulty with the concept > that some things in it are broken, rather > ickely broken, and > totally un-fun to work on, and the only way > your going to get > them fixed is by whipping some slave until they > do the filthy > task. People would rather spend the gold that > they have on > nice, pleasant projects that treat everyone > nicely and look good > on Resumes, and are not icky, nasty, > uncomfortable things to > do that make you late for dinner. > > Ted > What's going on Ted, have you jumped ship since I last came up for air? :) Its easy enough for commercial companies to fix the bugs if they need to use the broadcom drivers. There's just little incentive to donate the code back with this bunch of rude, incompetent clowns that have become the FreeBSD micky mouse club. There was a time when you could discuss an issue with Matt, Mike and Terry and hammer out a solution. Now you've got a bunch of gaming jockeys who know as much about hardware as my Mom. And that ain't much, sadly. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 17:36:33 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7D2E616A41F for ; Fri, 2 Jun 2006 17:36:33 +0000 (UTC) (envelope-from fbsd@a1poweruser.com) Received: from mta10.adelphia.net (mta10.adelphia.net [68.168.78.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 11BBA43D46 for ; Fri, 2 Jun 2006 17:36:32 +0000 (GMT) (envelope-from fbsd@a1poweruser.com) Received: from barbish ([70.39.69.56]) by mta10.adelphia.net (InterMail vM.6.01.05.02 201-2131-123-102-20050715) with SMTP id <20060602173632.QHNX27996.mta10.adelphia.net@barbish>; Fri, 2 Jun 2006 13:36:32 -0400 From: "fbsd" To: "Ian Smith" , "Matthew Seaman" Date: Fri, 2 Jun 2006 13:36:26 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1478 Importance: Normal Cc: questions@freebsd.org Subject: RE: phpMyAdmin problem - no Edit/Delete on Browse X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: fbsd@a1poweruser.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 17:36:33 -0000 I use phpMyAdmin on freebsd 6.1 and it has working edit/delete on browsed rows. I did pkg_add -r for mysql5 then had to run port for php5 doing make config first to select apache module. The package version on phpmyadmin is broken because it needs some other dependant wicch is broken. Use port version of phpmyadmin first run "make config" and de-select all options then make install. It will use php5 and mysql5 because it finds them all ready installed.This should also work on your 5.4 system -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Ian Smith Sent: Friday, June 02, 2006 12:48 PM To: Matthew Seaman Cc: questions@freebsd.org Subject: Re: phpMyAdmin problem - no Edit/Delete on Browse On Sun, 28 May 2006 at 18:26:46 +0100, Matthew Seaman wrote: > Ian Smith wrote: > > On Sun, 28 May 2006, Matthew Seaman wrote: > > > Ian Smith wrote: > > > > running 5.4-RELEASE and installed phpMyAdmin 2.6.1.3 with pkg_add -r > > [..] > > You would be well advised to upgrade to the latest phpMyAdmin, which is > version 2.8.1, and is in the current ports. There are a number of security > problems that affect many earlier versions. If you look at the list of > security announcements at http://www.phpmyadmin.net/home_page/security.php > then with version 2.6.1pl3 you're potentially vulnerable to anything announced > after PMASA-2005-1 It's good advice for sure, however not practicable at the moment. As I said, this laptop is not net-accessible, and I just needed to get a job done. According to the requirement list, I'd have to update php, expat, mysql version! - surely a case of the tail wagging the dog? - and even xorg, pretty much everything. Not really doable on a 28.8k modem link. So, given my broadband application is on 'hold' awaiting local enabling which might take months, I'm going for a 6.1 4-CD set as soon as they're available; packages and/or distfiles is really the only way to go for those (still many) parts of the planet without fast, cheap connections. > > Think I'll start again with the installed config. I really can't recall > > if this problem was there since installation, but as mentioned all other > > import/export, create/drop/copy database/table, adding rows etc all just > > works well so far, excepting edit/delete availability on browse. I did start again from scratch; no difference. Still can't believe that such a show-stopper bug wouldn't have obviously affected many phpmyadmin users on 5.4 - people do use it to edit records, don't they? - so still have to suspect some local config issue. Tried another browser and all. > I have a vague memory that I've seen something like this mentioned as a > bugfix in the release notes for phpMyAdmin, but I can't put my finger on > exactly where. You can see the release notes for most phpMyAdmin versions > here: > > https://sourceforge.net/project/showfiles.php?group_id=23067&package _id=16462 > > but the formatting is all wrong before the 2.8.x series. Yes, read every one since 2.6.1; nothing that struck me as even similar. Anyway, thankyou Matthew for your helpful advice and clues. Cheers, Ian _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 17:58:52 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B5A4916A421 for ; Fri, 2 Jun 2006 17:58:52 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33310.mail.mud.yahoo.com (web33310.mail.mud.yahoo.com [68.142.206.125]) by mx1.FreeBSD.org (Postfix) with SMTP id 5049943D4C for ; Fri, 2 Jun 2006 17:58:52 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 12926 invoked by uid 60001); 2 Jun 2006 17:58:51 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=J8dU37AV5bWcRwrVl/iocVAURNKJV/v9x1+lk9X3iietMKpn9CM2VF8GUS4Tjr4F7iQ0GPELezPF0ya2OmetzRNnf3XzPuCEtMdPoHGOf5iKPnYQQExgiocw0nkD/TNNHoNkwx6sOgJ+smhd4V99M/05673SJkHvpTLc2aqw4OE= ; Message-ID: <20060602175851.12924.qmail@web33310.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33310.mail.mud.yahoo.com via HTTP; Fri, 02 Jun 2006 10:58:51 PDT Date: Fri, 2 Jun 2006 10:58:51 -0700 (PDT) From: Danial Thom To: Ted Mittelstaedt , Heinrich Rebehn , questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 17:58:52 -0000 --- Ted Mittelstaedt wrote: > > > >-----Original Message----- > >From: owner-freebsd-questions@freebsd.org > >[mailto:owner-freebsd-questions@freebsd.org]On > Behalf Of Danial Thom > >Sent: Thursday, June 01, 2006 6:38 AM > >To: Heinrich Rebehn; questions@freebsd.org > >Subject: Re: Recommendation for 1000BASE-SX > card? > > > > > > > > > >--- Heinrich Rebehn > >wrote: > > > >> Danial Thom wrote: > >> > The intel cards that use the EM driver > are > >> the > >> > best performing cards in FreeBSD that > we've > >> > tested. We've test cards made by the same > >> company > >> > that use the broadcom controllers and the > >> intel > >> > cards are substantially better (ie use > less > >> CPU > >> > passing the same amount of traffic). > >> > > >> > Be careful using on-board controllers. > >> Usually > >> > vendors, for some reason, don't wire them > to > >> the > >> > pci-x bus. Most supermicro boards wire the > em > >> > controllers to the 32bit/33mhz bus and the > >> tyan > >> > and supermicro opteron boards we've tested > >> wire > >> > the broadcoms to a shared 1x PCI-E, both > of > >> which > >> > will not only give you poor performance, > but > >> are > >> > not capable of running full gigabit rates. > >> > > >> > DT > >> > > >> > >> The Intel card would be an INTEL Pro1000MF, > >> right? This would be quite > >> expensive (~ EUR 430), but good performance > and > >> stability would warrant > >> that. > >> ATM, we are using the onboard controller > >> (Broadcom BCM5704C wired to the > >> pci-x bus). I did not have opportunity to do > >> performance measurements, > >> but we do have problems with our Linkpro > >> 1000SX/1000TX converters, the > >> 3rd of which has already died. > >> That's why i want to give a PCI-X card with > >> fiber interface a try. > > > >No, that would be the 1000MT, the MF is a > fiber > >card I believe. They are about US$120. in the > US. > > > >How do you know its wired to the PCI-X bus, > since > >I don't believe that the controller has a way > of > >reporting the way that the intel controller > does? > >What MB do you have? > > > >Also keep in mind that the bge driver is a > piece > >of crap; driver quality is a much more telling > >factor in these free OS's than the card in > many > >cases. The EM and FXP are the only drivers > worth > >anything (mainly because neither were written > by > >mass-driver mill man Bill Paul). > > > > After having fixed bugs in the bge driver I > must stress > how wrong this statement is for the bge driver. > Bill > Paul may or may not have been associated with > the bge driver, > whether he was or not is immaterial since the > bge driver is > basically a port of the broadcom-supplied Linux > driver, > the code is Broadcoms mostly, with hunks of > Broadcom > code removed (like that dealing with the PHY's) > when it > was too difficult to port. (apparently) The > quality of > the Broadcom driver isn't Bill Paul's, it's > Broadcoms. > > No, I can assure you that the reason the > Broadcom > chips work like crap under FreeBSD is not due > to Bill Paul, > it is because the Broadcom hardware iteself is > pure, unadulterated, > stinking, bull crap. It is crappy even under > the supported operating > systems like Windows, it's craptitude reaches > new heights on > the crap pile. Broadcom missed their calling > as an ethernet > chipset designer, they should have gone into > making vacuum > cleaners, as they would certainly be the > suckiest ones in > that business. > > Ted I'll disagree with you on the authoring issue (without commenting on the crappiness of the controller), because it is ultimately the responsibility of the programmer to work around the quirks and even the bugs in any given controller, and the simple fact is that BP does a half-assed job; certainly not the kind of job someone whose sole responsibility was to maintain a particular driver. All complex controllers are a b*tch to write drivers for, and the ability to seemlessly integrate working code into the OS to mask the quirks is what separates the men from the boys. Saying the driver stinks because the example code stinks is a cop-out. All sample code stinks. The sample code should be just that; an example of how to program the controller. Taking example code and forcing it into a driver results in a garbage driver. Which is also why the strategy of hiring some "starving programmer" is not a viable option,since the talent of the programmer is directly proportiate to the quality of the finished driver. The margin between marginal programmers (guys that can get something done that "works") and a superior programmer is very large. We're not talking about welders here. There could be a 50% performance difference between 2 drivers for the same controller written by programmers with different talent levels. A couple of fewer or more efficient I/Os, a better way to allocate memory, how you flip the rings; all can make a tremendous difference, particularly when you get to the 100K+ iterations per second levels of traffic. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 18:28:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A706916A43A for ; Fri, 2 Jun 2006 18:28:39 +0000 (UTC) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from mail.asarian-host.net (mail.asarian-host.net [194.109.160.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7112443D5A for ; Fri, 2 Jun 2006 18:28:38 +0000 (GMT) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from anonymizer.asarian-host.net (localhost [127.0.0.1]) (authenticated bits=0) by mail.asarian-host.net (8.13.5/8.13.5) with ESMTP id k52ISbNu066126 for ; Fri, 2 Jun 2006 20:28:37 +0200 (CEST) (envelope-from admin@asarian-host.net) From: Mark Received-SPF: pass (asarian-host.net: 127.0.0.1 is authenticated by a trusted mechanism) receiver=anonymizer.asarian-host.net; client-ip=127.0.0.1; envelope-from=; helo=clientrunner.asarian-host.net; Message-Id: <200606021828.k52ISa3f066116@asarian-host.net> Date: Fri, 02 Jun 2006 18:28:36 GMT X-Authenticated-Sender: admin@asarian-host.net X-Trace: idfCTBRogqEDbe1VPYVYJEpXNTE3VuAjJKREMpLVO2O6Mkukt+vjaeWOoCD1zDdXmsDMzmJG8t4SfTpUbtqtFw== X-Complaints-To: abuse@asarian-host.net X-Abuse-Info: Please be sure to forward a copy of ALL headers, otherwise we are unable to process your complaint Organization: Asarian-host To: "'FreeBSD-Questions Questions'" MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In-Reply-To: <20060602151122.B087043D5D@mx1.FreeBSD.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Auth: Asarian-host PGP signature iQEVAwUARICDVDFqW1BleBN9AQHuHwf/V8HSzbyDWZrNfk42Ym0v2o/QUeup5r24 r9xyKvC1lUCoKc+2C8PJlsY7J9nTsTWkcbzDdg8xK0U3oHAD6SBRKW7GJ7Krl2Tw EvdCilDMkU3wNdQbQAozzq0fB4Bz4JGYvy8qI2vnBxO2bz7D9Lmte0+gc5uNPzDa uooXYgoukh2cDOrfyijVihY+Phc2oWLpjIzHsbsHN21NG8UaJwptY8JXhH2ou1Fh aXB3JFuawJI8m+GbId1KGULZ4wRMufsIHGSkj3K1V/BCNwjRz7RLreZPV3mcqbGv P094VmW5CmW1zk8km4pTMoZGl/SrpMozcUmTEvJpXKwSpzcGfW+Kew== =tNET Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 18:28:40 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of Scott Hiemstra > > Sent: vrijdag 2 juni 2006 17:13 > To: 'FreeBSD-Questions Questions' > Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? > > > I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe > > motherboard. I am thinking about de K8V-X SE. However, instead of the > > 8237 chipset, it has the 8237R. Is that supported in FreeBSD 4.11 > > stable as well? Also, instead of the Gigabyte LAN, it has a Realtek > > 8201CL D version LAN. Will that work, too? ... > > I have the same board in a server running 4.11 (FreeBSD 4.11-STABLE #0) > and no problems to report. The nic is detected as "RealTek 8129/8139" > but seems to function just fine. I would recommend building a temporary > system, doing an install and then once you verify all is well... Swap > the board into your existing machine. Thanks for the answer. Yes, I'm not looking into making things complicated. I just want a quick, no-hassle replacement board for my old server. Seems like this board will do just that. :) - Mark From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 18:50:36 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 95F6516A425 for ; Fri, 2 Jun 2006 18:50:36 +0000 (UTC) (envelope-from lamont@cluepon.com) Received: from clavin.cluepon.com (clavin.cluepon.com [64.154.215.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0EB0F43D45 for ; Fri, 2 Jun 2006 18:50:36 +0000 (GMT) (envelope-from lamont@cluepon.com) Received: from lamont by clavin.cluepon.com with local (Exim 3.03 #1) id 1FmEix-000Gay-00; Fri, 02 Jun 2006 11:50:19 -0700 Date: Fri, 2 Jun 2006 11:50:19 -0700 From: Lamont Lucas To: Erik =?iso-8859-1?Q?N=F8rgaard?= Message-ID: <20060602185018.GK46634@clavin.cluepon.com> References: <20060602025341.GH46634@clavin.cluepon.com> <448045DD.3070605@locolomo.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="0hHDr/TIsw4o3iPK" Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <448045DD.3070605@locolomo.org> Organization: Cluepon Consulting, Inc. User-Agent: Mutt/1.5.4i Cc: Lamont Lucas , questions@freebsd.org Subject: Re: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 18:50:36 -0000 --0hHDr/TIsw4o3iPK Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit On Fri, Jun 02, 2006 at 04:06:21PM +0200, Erik Nørgaard wrote: > Lamont Lucas wrote: > > Specifically, while using my old install.cfg, my new machines were not > > being built with a kernel. > > *snip* > > If you do not have a "installCommit" at the end of your install.cfg the > sysinstall should fall back on the normal interactive interface and you > can verify that your settings have been applied. I do indeed have an installCommit after the regular sysinstall stuff (but before my package adds) The issue is not that my jumpstart fails to run, or run unattended. The problem is that once made, my jumpstarted machines have no kernel. And adding an explicit kernels dist to my list of dists to install did nothing that I could tell. There is probably something useful in the debug, but it scrolls past so fast that I can't even see it. For clarity, I'm attaching my install.cfg to see if anybody can figure out why it's not installing a kernel. To work around this, I think I'm going to make a pkg of my kernel and install it along with the rest of the packages. > > (I originally used the freebsd.org handbook site on pxeboot, but it > > was horribly out of date (4.x) and later had more luck with > > http://www.daemonsecurity.com/pub/pxeboot/article.html, which is > > how I got my 5.5 machine working. I see it has been updated for > > 6.x but uses a non-custom dist install set, which isn't exactly > > what I want) > > Rather, it is being updated - it seems to be a continual process :-) let > me know of useful cheats and tricks. Thank you for the excellent guide. Your method of making a custom memory disk for jumpstarting was really sweet and worked perfectly with my older 5.4 install. (I incorrectly called it 5.5 above) You'll notice that "my" install.cfg is a blatant rip-off and cribbing of the one from the handbook as well as your site. -- - Lamont "I am not an atomic playboy." --0hHDr/TIsw4o3iPK Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="install.cfg" # This is the installation configuration file for our FreeBSD SM6013p-8+ # machines # it currently does the basic drive partitioning and installs common # software. No modifications are made to rc.conf. 20051013 -lal # Turn on extra debugging. debug=YES # Ok, this ought to turn off ALL prompting, don't complain to me that you # lost a machine because you netbooted it on the same subnet as this # box nonInteractive=YES noConfirm=YES noWarn=NO #tryDHCP=YES ################################ # My host specific data hostname=newmachine domainname=shockwave.com nameserver=10.0.0.1 defaultrouter=10.0.0.1 ipaddr=10.0.0.99 netmask=255.255.255.0 ################################ ################################ # Which installation device to use _ftpPath=ftp://10.0.0.1/ netDev=em0 ipaddr=10.0.0.99 netmask=255.255.255.0 defaultrouter=10.0.0.1 mediaSetFTP ################################ ################################ # Select which distributions we want. dists=base kernels manpages catpages proflibs dict distSetCustom ################################ ################################ # Now set the parameters for the partition editor on da0. disk=da0 partition=all bootManager=standard diskPartitionEditor #diskPartitionWrite ################################ ################################ # All sizes are expressed in 512 byte blocks! # # A 4GB root partition, followed by a 4G swap partition, followed by # a 4G /var, and a /usr using all the remaining space on the disk # da0s1-1=ufs 8388608 / da0s1-2=swap 8388608 none da0s1-3=ufs 8388608 /var da0s1-4=ufs 0 /usr 1 # Let's do it! diskLabelEditor #diskLabelCommit # OK, everything is set. Do it! installCommit # now install the software that we expect to have added after the fact #never mind, let's do that after the fact #package=bash-2.05b.007_4 #packageAdd package=libiconv-1.9.2_1 packageAdd package=expat-1.95.8_3 packageAdd package=gettext-0.14.5 packageAdd package=gtar-1.15.1_1 packageAdd package=lsof-4.76 packageAdd package=rc_subr-1.31 packageAdd package=rsync-2.6.6 packageAdd package=sudo-1.6.8.9 packageAdd package=openssl-0.9.8a packageAdd package=wget-1.10.1 packageAdd package=ASWfping-2.4b2 packageAdd package=CustomASW-1.0 packageAdd # CFengine is no longer installed pre-reboot #package=ASWcfengine-2.1.11 #packageAdd #Now grab config (rc.conf) for this mac string and dump it in /etc # Extra commands (installing other files, one time post-install scripts) #command=/stand/GetConfig.sh #system # halt machine so that operator can move it to correct location command=shutdown -p now system --0hHDr/TIsw4o3iPK-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 18:59:07 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1B2E316A51B for ; Fri, 2 Jun 2006 18:59:07 +0000 (UTC) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from mail.asarian-host.net (mail.asarian-host.net [194.109.160.70]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6ADB543D49 for ; Fri, 2 Jun 2006 18:59:06 +0000 (GMT) (envelope-from SRS0=1v9hpxRH=7V=asarian-host.net=admin@asarian-host.net) Received: from anonymizer.asarian-host.net (localhost [127.0.0.1]) (authenticated bits=0) by mail.asarian-host.net (8.13.5/8.13.5) with ESMTP id k52Ix5jp067436 for ; Fri, 2 Jun 2006 20:59:05 +0200 (CEST) (envelope-from admin@asarian-host.net) From: Mark Received-SPF: pass (asarian-host.net: 127.0.0.1 is authenticated by a trusted mechanism) receiver=anonymizer.asarian-host.net; client-ip=127.0.0.1; envelope-from=; helo=clientrunner.asarian-host.net; Message-Id: <200606021859.k52Ix4gr067426@asarian-host.net> Date: Fri, 02 Jun 2006 18:59:04 GMT X-Authenticated-Sender: admin@asarian-host.net X-Trace: VoLcOObqBiHvpgClTYxuIDifbyj0vBPX/HmktgFgFVG+hUkQfrw5zev8wFUJ6WXp0T5gRhM9CHMPLrTlYAgTAw== X-Complaints-To: abuse@asarian-host.net X-Abuse-Info: Please be sure to forward a copy of ALL headers, otherwise we are unable to process your complaint Organization: Asarian-host To: "'FreeBSD-Questions Questions'" MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit In-Reply-To: <20060602162712.51103.qmail@web33307.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2869 X-Auth: Asarian-host PGP signature iQEVAwUARICKeTFqW1BleBN9AQENwQgAmKSwtd4nfdHCJw2Vcsrik1ngdgP+6+PE OMiF5lehFYAUWF8MbUVn1lzEe6nH5A+E2T8aQ7McKom0ewR5IeF783mmxFXd928R DxsOegPKqLGlJhl0tIAuuYMcnOK+nlkgOOqnoAnSOMvUCMzfOP/0YoXkD4z42HSb Bzbbh9q2MbV2KJnDfW81loYiqlD6KVGKMl+5zXUgdIJ08SZz/ZGHRqO8PWHoMbkE 0QidTaSHNTL9Dvom6xrLYdgABU1txRhDuISdyQnCUBX7i/8PAKRvL29xKwJeDnI0 z5K1dh49eufMSAT5vlGmlEJI1dxEPNX8MI8NsloDi/3XPFBCoD4Dag== =2W1z Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 18:59:14 -0000 > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of Danial Thom > Sent: vrijdag 2 juni 2006 18:28 > To: Scott Hiemstra; 'FreeBSD-Questions Questions' > Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? > > --- Scott Hiemstra wrote: > > > > Did you say you are running a server? That MB is only suitable for > > > desktop use, as it has the slowest ethernet controller known to man > > > on a 32/33Mhz bus. Running this MB as a server is like putting > > > cheap, skinny tires on your porsche. > > > > > > DT > > > > Personaly, I appreciate your dedication to maximum performance but > > please notice this thread is in reference to swapping a MB for another > > MB and coments like yours are not appreciated. > > > > Would you prefer if I had stated? > > > > "I have the same board in a crappy server running 4.11 (FreeBSD > > 4.11-STABLE #0) and no problems to report." > > > > Please notice I never said what the box was doing nor did I ask for > > your opinion of what MB/NIC I use in my systems. This SERVER is pur- > > pose built and runs stable 24/7 as a low volume outbound mail server > > so the performance of the NIC is not my primary concern. Please keep > > your useless comments to yourself as they do nothing but waste disk > > space, CPU time and the valuable time of people who attempt to help > > others on this list. > > > > Scott > > So if someone is planning on using a crappy motherboard as a server its > not appropriate to mention that the replacement is not suitable for the > task? So since you're replacing the MB, why not take the opportunity to > use something suitable. Because it means introducing a whole slew of new, unknown variables. :) When I first installed 4.10R, it did not even support the 8237; and disk performance on that board was limited to a terribly slow Multi-World DMA 2 mode (I think it was that; very slow, at least). So, imagine my delight when 4.11-STABLE supported the 8237 at last. Buying a newer type motherboard for 4.11-STABLE (where would you find one for socket 754, so soon replaced by socket 939, anyway?) would likely mean an unsupported south-bridge chip, and being back to square one. Nope. I'm gonna stick with what works for 4.11-STABLE (as that is still my preferred FreeBSD version; and if I cannot find a new motherboard after the new one dies, I will just continue to run the whole thing in a Vmware box). As for the LAN, since I only have a 100 Mb network, I see no reason to assume even a less than ideal performing gigabit LAN would slow things down (unless its performance dropped below 10%; and I'm sure it's not that bad). In fact, not to be unnecessarily contrary, but I would ere say this motherboard is totally unsuited for desktop use (I have a shiny P5WD2 Premium for that), and that this board is rather ideally suited for a FreeBSD 4.11 system. - Mark From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 19:21:22 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 83FB216A44F for ; Fri, 2 Jun 2006 19:21:22 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id B7E1E43D6A for ; Fri, 2 Jun 2006 19:21:21 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wr-out-0506.google.com with SMTP id i20so586530wra for ; Fri, 02 Jun 2006 12:21:21 -0700 (PDT) Received: by 10.54.69.15 with SMTP id r15mr2152606wra; Fri, 02 Jun 2006 12:21:20 -0700 (PDT) Received: from scorpio ( [216.45.217.148]) by mx.gmail.com with ESMTP id 45sm2067341wri.2006.06.02.12.21.19; Fri, 02 Jun 2006 12:21:20 -0700 (PDT) Date: Fri, 2 Jun 2006 15:21:13 -0400 (EDT) From: "Gerard E. Seibert" To: FreeBSD-Questions Message-ID: <20060602151141.C1574@seibercom.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: Error Message Upon Reboot X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: "Gerard E. Seibert" List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 19:21:23 -0000 The following error message suddenly appeared after I booted up my system. The PC is connected to a small LAN. I Googled but was not able to find out what the message is suppose to mean. //Error Message Below// ~ $ Jun 2 15:01:56 seibercom kernel: arp: 00:07:e9:ea:f5:52 is using my IP address 192.168.0.2! //End Error Message// Since I have not seen this message before, I was wondering it is something I should be worried about. -- Gerard Seibert gerard@seibercom.net From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 19:26:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EB69316A571 for ; Fri, 2 Jun 2006 19:26:28 +0000 (UTC) (envelope-from chad@shire.net) Received: from hobbiton.shire.net (mail.shire.net [166.70.252.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5C87643D92 for ; Fri, 2 Jun 2006 19:26:22 +0000 (GMT) (envelope-from chad@shire.net) Received: from [67.171.127.191] (helo=[192.168.99.68]) by hobbiton.shire.net with esmtpa (Exim 4.51) id 1FmFHq-0002BX-59; Fri, 02 Jun 2006 13:26:22 -0600 In-Reply-To: <20060602151141.C1574@seibercom.net> References: <20060602151141.C1574@seibercom.net> Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: "Chad Leigh -- Shire.Net LLC" Date: Fri, 2 Jun 2006 13:26:21 -0600 To: "Gerard E. Seibert" X-Mailer: Apple Mail (2.750) X-SA-Exim-Connect-IP: 67.171.127.191 X-SA-Exim-Mail-From: chad@shire.net X-SA-Exim-Scanned: No (on hobbiton.shire.net); SAEximRunCond expanded to false Cc: FreeBSD-Questions Subject: Re: Error Message Upon Reboot X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 19:26:38 -0000 On Jun 2, 2006, at 1:21 PM, Gerard E. Seibert wrote: > The following error message suddenly appeared after I booted up my > system. The PC is connected to a small LAN. I Googled but was not > able to find out what the message is suppose to mean. > > //Error Message Below// > > ~ $ Jun 2 15:01:56 seibercom kernel: arp: 00:07:e9:ea:f5:52 is > using my IP address 192.168.0.2! > > //End Error Message// > > Since I have not seen this message before, I was wondering it is > something I should be worried about. It means another computer on the same LAN is using your same address that your machine assumed when it booted. Are you using DHCP? If yes, is everyone on the LAN using DHCP? Chad --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 19:27:09 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7318916A668 for ; Fri, 2 Jun 2006 19:27:09 +0000 (UTC) (envelope-from wmoran@collaborativefusion.com) Received: from mx00.pub.collaborativefusion.com (mx00.pub.collaborativefusion.com [206.210.89.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id A26E043D77 for ; Fri, 2 Jun 2006 19:26:47 +0000 (GMT) (envelope-from wmoran@collaborativefusion.com) Received: from vanquish.pgh.priv.collaborativefusion.com (vanquish.pgh.priv.collaborativefusion.com [192.168.2.61]) (AUTH: LOGIN wmoran, TLS: TLSv1/SSLv3,256bits,AES256-SHA) by wingspan with esmtp; Fri, 02 Jun 2006 15:26:46 -0400 id 00056412.448090F6.000017A5 Date: Fri, 2 Jun 2006 15:26:45 -0400 From: Bill Moran To: "Gerard E. Seibert" Message-Id: <20060602152645.df5686e7.wmoran@collaborativefusion.com> In-Reply-To: <20060602151141.C1574@seibercom.net> References: <20060602151141.C1574@seibercom.net> Organization: Collaborative Fusion X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Error Message Upon Reboot X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 19:27:17 -0000 On Fri, 2 Jun 2006 15:21:13 -0400 (EDT) "Gerard E. Seibert" wrote: > The following error message suddenly appeared after I booted up my system. > The PC is connected to a small LAN. I Googled but was not able to find out > what the message is suppose to mean. > > //Error Message Below// > > ~ $ Jun 2 15:01:56 seibercom kernel: arp: 00:07:e9:ea:f5:52 is using my > IP address 192.168.0.2! > > //End Error Message// > > Since I have not seen this message before, I was wondering it is something > I should be worried about. It means you have two machines on your network with the same IP. -- Bill Moran Collaborative Fusion Inc. From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 19:44:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 79DFB16A42B for ; Fri, 2 Jun 2006 19:44:14 +0000 (UTC) (envelope-from bidjan@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.184]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB26743D45 for ; Fri, 2 Jun 2006 19:44:13 +0000 (GMT) (envelope-from bidjan@gmail.com) Received: by nf-out-0910.google.com with SMTP id l37so1175238nfc for ; Fri, 02 Jun 2006 12:44:13 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=lUryU76tLG4puvKWI/A6qdonh8owN3MdtLv0xUdnmEZaOknu/pzL4APqsK5h7/2tOsRINEv6lY4W1mNn9DNEJEf1TvJuNw/ko+VNe7y7Fa8Bm8d0pYBU6kZMSpjI9DBD+ozadt/HnScD45K7SwE0ChR31lwbUAHCacSh386A2KA= Received: by 10.49.14.18 with SMTP id r18mr1464127nfi; Thu, 01 Jun 2006 19:44:41 -0700 (PDT) Received: by 10.49.85.18 with HTTP; Thu, 1 Jun 2006 19:44:41 -0700 (PDT) Message-ID: Date: Thu, 1 Jun 2006 22:44:41 -0400 From: "Pablo Mora" To: freebsd-questions@freebsd.org In-Reply-To: <447EA964.5070203@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <447D53FE.5000003@gmail.com> <447DA6D2.2020605@cs.tu-berlin.de> <447E54D4.909@gmail.com> <20060601030705.GA6337@xor.obsecurity.org> <447EA964.5070203@gmail.com> Subject: Re: "Illegal instruction " while portupgrade X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 19:44:14 -0000 On 6/1/06, snnn wrote: > Kris Kennaway wrote: > > > > > > A lot of these are invalid, i.e. not the correct name. > > > > > Oh?which one? > > Probably, are you sure that is the CPU you have? > > > > > I'm sure. man 5 make.conf -- Linux is for people who hate Micro$oft. BSD is for people who love Unix ... From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 19:49:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0BEE216A46E for ; Fri, 2 Jun 2006 19:49:11 +0000 (UTC) (envelope-from donald.teed@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by mx1.FreeBSD.org (Postfix) with ESMTP id 917FC43D55 for ; Fri, 2 Jun 2006 19:49:10 +0000 (GMT) (envelope-from donald.teed@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so747523pye for ; Fri, 02 Jun 2006 12:49:10 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=q+gZoC8yDR79SOTY1xkqQYohTxXhSY3aNba9vJc0r+dccjvQJVB0xW/7ea3SYIlPI5itcPvkAg39UMt9vU8+zhbW4ekyuLCi7UgclsGlLt7HWbkjJ6+GASEM3xHyzESWAUsCWfAC+HGG7QVF7zWa0pTP3/JcxPAUDkrIzQIdhyY= Received: by 10.35.37.18 with SMTP id p18mr2826613pyj; Fri, 02 Jun 2006 12:49:10 -0700 (PDT) Received: by 10.35.119.17 with HTTP; Fri, 2 Jun 2006 12:49:09 -0700 (PDT) Message-ID: Date: Fri, 2 Jun 2006 16:49:09 -0300 From: "Donald Teed" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: How to get networker backup software X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 19:49:11 -0000 Hi, Our institution uses networker for backups. We absolutely require networker client for FreeBSD. I'm astonished that it was just dropped from ports. I have a dozen or so machines where networker client is already humming along and it works well for us. I have a recently setup BSD box I want to add to the backup routines. Unfortunately, making a tar of nsr folder and copying the networker.sh script has not worked. We have the same 4.11 BSD on all BSD boxes. When I try to run nsrexecd, it dumps core. I found an old copy of the dists tarball, but that doesn't contain everything I'm finding in an existing install of networker client on another BSD box. Has anyone figured out how to support networker client since it was dropped from ports? --Donald From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 20:04:21 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F102516A58C for ; Fri, 2 Jun 2006 20:04:21 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id DC68443D4C for ; Fri, 2 Jun 2006 20:04:15 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id 5EA6A2E02B; Fri, 2 Jun 2006 22:04:09 +0200 (CEST) Message-ID: <448099AB.20906@locolomo.org> Date: Fri, 02 Jun 2006 22:03:55 +0200 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Lamont Lucas References: <20060602025341.GH46634@clavin.cluepon.com> <448045DD.3070605@locolomo.org> <20060602185018.GK46634@clavin.cluepon.com> In-Reply-To: <20060602185018.GK46634@clavin.cluepon.com> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms080701020307040006030305" Cc: questions@freebsd.org Subject: Re: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 20:04:25 -0000 This is a cryptographically signed message in MIME format. --------------ms080701020307040006030305 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Lamont Lucas wrote: > On Fri, Jun 02, 2006 at 04:06:21PM +0200, Erik Nørgaard wrote: >> >> If you do not have a "installCommit" at the end of your install.cfg the >> sysinstall should fall back on the normal interactive interface and you >> can verify that your settings have been applied. > > I do indeed have an installCommit after the regular sysinstall > stuff (but before my package adds) The issue is not that my > jumpstart fails to run, or run unattended. The problem is that once > made, my jumpstarted machines have no kernel. And adding an explicit > kernels dist to my list of dists to install did nothing that I could > tell. There is probably something useful in the debug, but it > scrolls past so fast that I can't even see it. > Maybe I did not make myself clear, my idea is that if you disable the installCommit you will get back to the interactive sysinstall and you can run over the menus to see if things are actually set as you want. If you find an empty kernel check box, write down the name of the menu option and grep it in the source. This new kernel dist is unknown to me, I looked at the source and it seems that the idea is to let you choose to install an smp kernel or standard generic kernel. I just tried to use the sysinstall interactively and indeed, when you choose the kernels dist under distributions a new menu appears where you are supposed to select the kernel(s) you want. By default, none is selected. > For clarity, I'm attaching my install.cfg to see if anybody can figure > out why it's not installing a kernel. To work around this, I think > I'm going to make a pkg of my kernel and install it along with the > rest of the packages. Workarounds are ok, but I think that everyone would benefit from the correct solution, if this new dist breaks the jumpstart installation then a pr should be filed. So, in short, it appears that the correct solution will be one of: a) figure out the option that selects the kernel, or b) hack sysinstall to set a reasonable default kernel to install, write a pr with a patch I think that in any case a pr should be filed, even if there is an option available for the install.cfg. A good default for the kernels dist is to install the generic kernel which will work on both smp and non-smp systems. Having none selected doesn't make sense. Cheers, Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms080701020307040006030305 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMjIwMDM1 N1owIwYJKoZIhvcNAQkEMRYEFOL7cQY5jd+pEz9cLdoyni0Ff8dJMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQA3fNzIsEbcU99nZ56IUUEXgOEbDxuf h6wxeNhWQe+qZccaNAQ/0YjDHtDD+oQ17E9q9Yqv6qgb8OCUVrV8smXHMjcvkOoxtmnPJzFk SRnzDaiL1D6zf75RI7uCWrPEz6cddXuv6cp/vafjs3OvDp8CUEWM0eEhDnsPqfvPj4OneFbs TFdDudI92uWC4MXeuI3cH3W7QkdVAfoJKAvvApl9NMcVIJKdj1xf8+5iMhDMvqqSUYYINx0O HaX1iZbDNX9wWfdTqAqvFoqC7M6Uxi5RWoebEHulfYeOGUHzOuDa1RXQWCAPMRNBmxMADpDm +wFAIVvrr9PSuDWv4CrwcmiaAAAAAAAA --------------ms080701020307040006030305-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 20:29:15 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C42F216A48B for ; Fri, 2 Jun 2006 20:29:15 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id B583043D46 for ; Fri, 2 Jun 2006 20:29:13 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id 7546F2E02B; Fri, 2 Jun 2006 22:29:11 +0200 (CEST) Message-ID: <44809F8A.1090208@locolomo.org> Date: Fri, 02 Jun 2006 22:28:58 +0200 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: =?ISO-8859-1?Q?Erik_N=F8rgaard?= References: <20060602025341.GH46634@clavin.cluepon.com> <448045DD.3070605@locolomo.org> <20060602185018.GK46634@clavin.cluepon.com> <448099AB.20906@locolomo.org> In-Reply-To: <448099AB.20906@locolomo.org> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms040804010506050507000006" Cc: Lamont Lucas , questions@freebsd.org Subject: Re: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 20:29:20 -0000 This is a cryptographically signed message in MIME format. --------------ms040804010506050507000006 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Erik Nørgaard wrote: >> For clarity, I'm attaching my install.cfg to see if anybody can figure >> out why it's not installing a kernel. To work around this, I think >> I'm going to make a pkg of my kernel and install it along with the >> rest of the packages. > > Workarounds are ok, but I think that everyone would benefit from the > correct solution, if this new dist breaks the jumpstart installation > then a pr should be filed. A better workaround may be to choose the minimal installation, since this should be the absolute barebone install. There are two things you can do: * check the source to figure out what minimal install selects and select that in your customDist. or, * select and installCommit first the minimal install, then select and install commit your custom dist. Yes, it's a waste if some things are overwritten, but it should work. If minimal install doesn't work, then you've found a serious bug in the new sysinstall. Cheers, Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms040804010506050507000006 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMjIwMjg1 OVowIwYJKoZIhvcNAQkEMRYEFAYpXPp3QnnGayiFPfBNEr9gJmH+MFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQBfmpKZ8UePJOM1K1pR1v1bWFY1LwVo ZZHcdtrHvduD/RnF4Tl+RzWoWW/6BktGjMJVneBrnPfwPnHqBpBLrG9Z1Zs1+eR+nXR+AdFM b4IhtvtpSshB5Y1tmT7Qk5c/mdQO6O3BhMOncSsRebQhAMNb50pYXQkPF8NwdVkhWYzYir0i Vi/fn4p+1cndGIOyMiYLpsLG6b5i1mi1vtYpjEOzG5rxcJZeFRsuTU4ES29pRffDU64CLm0m xMFavxcRixdCJsPgKV7ZWeVRTzqVcqaf7qA7CPzAfrUScQkWSpkPYR5C9vXIntpKydQQeaCk J9HkfRyHOskirrlfPngzKRcIAAAAAAAA --------------ms040804010506050507000006-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 20:42:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BD35B16A541 for ; Fri, 2 Jun 2006 20:42:32 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-satin.atl.sa.earthlink.net (pop-satin.atl.sa.earthlink.net [207.69.195.63]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5C6F443D64 for ; Fri, 2 Jun 2006 20:42:29 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeeble.com) by pop-satin.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1FmGTU-0003NF-00; Fri, 02 Jun 2006 16:42:28 -0400 Date: Fri, 2 Jun 2006 16:43:09 -0400 From: Randy Pratt To: "Donald Teed" Message-Id: <20060602164309.9863f9d8.bsd-unix@earthlink.net> In-Reply-To: References: X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: How to get networker backup software X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 20:42:33 -0000 On Fri, 2 Jun 2006 16:49:09 -0300 "Donald Teed" wrote: > Hi, > > Our institution uses networker for backups. We absolutely require > networker client for FreeBSD. I'm astonished that it was just dropped > from ports. > > I have a dozen or so machines where networker client is already > humming along and it works well for us. I have a recently setup > BSD box I want to add to the backup routines. Unfortunately, > making a tar of nsr folder and copying the networker.sh script > has not worked. We have the same 4.11 BSD on all BSD boxes. > When I try to run nsrexecd, it dumps core. > > I found an old copy of the dists tarball, but that doesn't > contain everything I'm finding in an existing install of networker > client on another BSD box. > > Has anyone figured out how to support networker client > since it was dropped from ports? I would think the first thing to do would be to fix the unresolved security issues. http://www.freebsd.org/cgi/cvsweb.cgi/ports/sysutils/nwclient/Attic/ http://www.vuxml.org/freebsd/d177d9f9-e317-11d9-8088-00123f0f7307.html It was marked as forbidden as far back as July 2005 and apparently no one stepped up to fix those issues and was subsequently removed from the ports tree. It also seems that the security issues existed as far back as 2002. You should be able to copy the ports skeleton(s) from your existing machines (or get it from CVS) and build it that way. I'd just be a bit cautious relying on software with known security issues. Caveat: I could be wrong on this since I don't use and have never used this port. HTH, Randy -- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 21:26:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 63A1316A447 for ; Fri, 2 Jun 2006 21:26:14 +0000 (UTC) (envelope-from walt@wump.org) Received: from mxsf02.cluster1.charter.net (mxsf02.cluster1.charter.net [209.225.28.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0528243D46 for ; Fri, 2 Jun 2006 21:26:13 +0000 (GMT) (envelope-from walt@wump.org) Received: from mxip28a.cluster1.charter.net (mxip28a.cluster1.charter.net [209.225.28.187]) by mxsf02.cluster1.charter.net (8.12.11/8.12.11) with ESMTP id k52LQCo0008414 for ; Fri, 2 Jun 2006 17:26:12 -0400 Received: from 68-116-98-9.dhcp.rsbg.or.charter.com (HELO [10.0.0.10]) ([68.116.98.9]) by mxip28a.cluster1.charter.net with ESMTP; 02 Jun 2006 17:26:13 -0400 X-IronPort-AV: i="4.05,205,1146456000"; d="scan'208"; a="1204116835:sNHT37098544" Mime-Version: 1.0 X-Sender: wump@sorcom.com@mail.mcsi.net Message-Id: Date: Fri, 2 Jun 2006 14:26:07 -0700 To: freebsd-questions@freebsd.org From: Walt Pawley Content-Type: text/plain; charset="us-ascii" Subject: termcap vs terminfo, less, and Mac OS X X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 21:26:19 -0000 I've been messing about with FreeBSD lately, though mostly I use Mac OS X. I've grown accustomed to using "less" as a pager, generally preferring the manner in which it would make all the scrolled through crud vanish when I was done pawing about in it. But "less" didn't behave that way when telnet'd into the the FreeBSD boxes on the LAN - whatever got presented scrolled "up" into the terminal program's capture buffer. After mucking with this for a couple of days, I believe the reason is that the termcap description of "xterm-color" in FreeBSD doesn't match the "xterm-color" terminfo description in either Mac OS X or Linux (which seem to be identical). In particular, the "ti" and "te" capabilities are null. Is this intentional or something that should be generically "fixed"? -- Walter M. Pawley Wump Research & Company 676 River Bend Road, Roseburg, OR 97470 541-672-8975 From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 21:37:29 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B1E016A51A for ; Fri, 2 Jun 2006 21:37:29 +0000 (UTC) (envelope-from dickey@saltmine.radix.net) Received: from saltmine.radix.net (saltmine.radix.net [207.192.128.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7D22E43D45 for ; Fri, 2 Jun 2006 21:37:27 +0000 (GMT) (envelope-from dickey@saltmine.radix.net) Received: from saltmine.radix.net (localhost [127.0.0.1]) by saltmine.radix.net (8.12.2/8.12.2) with ESMTP id k52LbR3F008723; Fri, 2 Jun 2006 17:37:27 -0400 (EDT) Received: (from dickey@localhost) by saltmine.radix.net (8.12.2/8.12.2/Submit) id k52LbQiS008717; Fri, 2 Jun 2006 17:37:26 -0400 (EDT) Date: Fri, 2 Jun 2006 17:37:26 -0400 From: Thomas Dickey To: Walt Pawley Message-ID: <20060602213726.GA5221@saltmine.radix.net> References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="T4sUOijqQbZv57TR" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.3.27i Cc: freebsd-questions@freebsd.org Subject: Re: termcap vs terminfo, less, and Mac OS X X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 21:37:29 -0000 --T4sUOijqQbZv57TR Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Jun 02, 2006 at 02:26:07PM -0700, Walt Pawley wrote: > I've been messing about with FreeBSD lately, though mostly I > use Mac OS X. I've grown accustomed to using "less" as a pager, > generally preferring the manner in which it would make all the > scrolled through crud vanish when I was done pawing about in > it. But "less" didn't behave that way when telnet'd into the > the FreeBSD boxes on the LAN - whatever got presented scrolled > "up" into the terminal program's capture buffer. >=20 > After mucking with this for a couple of days, I believe the > reason is that the termcap description of "xterm-color" in > FreeBSD doesn't match the "xterm-color" terminfo description in > either Mac OS X or Linux (which seem to be identical). In > particular, the "ti" and "te" capabilities are null. Most of the Linux's have xterm-color the same as in ncurses. A couple (I've observed) do as in Mac OS X and choose some flavor of xterm to replace it. There's no standard choice for the replacement. The choice of whether to have ti/te null is arbitrary (half of xterm's users like the alternate screen, half don't). =20 > Is this intentional or something that should be generically "fixed"? The fix is simply not to use "xterm-color". It doesn't correspond to any terminal type, is useful only to people who don't care to find out what the terminal is. For instance, you've not identified the terminal type. Find out what it is... xterm supports ANSI color, VT220 emulation and UTF-8 There's an faq at http://invisible-island.net/xterm/xterm.faq.html ftp://invisible-island.net/xterm/ The current version of ncurses is 5.5 (20051010) There's an faq at http://invisible-island.net/ncurses/ncurses.faq.html --=20 Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net --T4sUOijqQbZv57TR Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (SunOS) Comment: For info see http://www.gnupg.org iD8DBQFEgK+VtIqByHxlDocRAgCCAJ9SctG5DlmbzZj7zbqy1jk9klhwWwCfTLjk BMCoRHLPZmd2asREiR4RkLw= =TCal -----END PGP SIGNATURE----- --T4sUOijqQbZv57TR-- From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 21:43:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6076A16A478 for ; Fri, 2 Jun 2006 21:43:02 +0000 (UTC) (envelope-from vdemart1@tin.it) Received: from vsmtp4.tin.it (vsmtp4.tin.it [212.216.176.224]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0392443D46 for ; Fri, 2 Jun 2006 21:43:01 +0000 (GMT) (envelope-from vdemart1@tin.it) Received: from [83.225.137.250] (83.225.137.250) by vsmtp4.tin.it (7.2.072.1) (authenticated as vdemart1@tin.it) id 44756A3E008E9D73 for freebsd-questions@freebsd.org; Fri, 2 Jun 2006 23:44:45 +0200 From: vittorio To: freebsd-questions@freebsd.org Date: Fri, 2 Jun 2006 23:42:23 +0000 User-Agent: KMail/1.9.1 References: <10b8f6f083d.vdemart1@tin.it> <44ac8xrp33.fsf@be-well.ilk.org> In-Reply-To: <44ac8xrp33.fsf@be-well.ilk.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200606022342.24060.vdemart1@tin.it> Subject: Re: R, unixodbc & easysoft problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 21:43:04 -0000 Yes, I have it ls -al /usr/compat/linux/lib/libm.so.6 lrwxr-xr-x 1 root wheel 13 15 Mar 14:32 /usr/compat/linux/lib/libm.so.6 = =2D>=20 libm-2.3.2.so Vittorio Alle 13:18, gioved=EC 01 giugno 2006, Lowell Gilbert ha scritto: > Vittorio writes: > > I installed first, from the ports, unixodbc, then the latest oracle > > easysoft driver on my FBSD 6.1 box, following the included > > instructions. When using unixodbc with postgresql, plain sailing, it > > works like a charm! > > But when I try to connect via odbc to oracle (here > > an instance of the statistical software R) I get: > > > > 1: [RODBC] ERROR: > > state 01000, code 0, message [unixODBC][Driver Manager]Can't open lib > > '/usr/compat/linux/usr/local/easysoft/oracle/libesoracle.so' : Shared > > object "libm.so.6" not found, required by "libesoracle.so" > > > > and > > issuing: > > /compat/linux/usr/bin/ldd -v libesoracle.so > > /compat/linux/usr/bin/ldd: /lib/ld-linux.so.2: not found > > ldd: /lib/ld- > > linux.so.2 $exited with unknown exit code (127) > > > > I understand that > > there's something to be set as far as libraries to be used & linked are > > concerned. > > Do you have the "missing" library? > On my system, it was installed by the linux_base port, and is > /usr/compat/linux/lib/libm.so.6 From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 22:03:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6A98B16A423 for ; Fri, 2 Jun 2006 22:03:08 +0000 (UTC) (envelope-from donald.teed@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.180]) by mx1.FreeBSD.org (Postfix) with ESMTP id E5E7743D46 for ; Fri, 2 Jun 2006 22:03:07 +0000 (GMT) (envelope-from donald.teed@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so772942pye for ; Fri, 02 Jun 2006 15:03:07 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KKCpdoDR0gz3agSqgku/ogw0enKut9SmBT3ZWfU1X3nppByR5Si41Wnga322q5nfWOoF9fNsH68hSsm+IqF2kpFDiMEWEkrJRi42JORW/tbItXdg7GmmDk+aF9l9DDXo1nbpa8xIQK8yvg3cO31MYNg/uFNeBPO4/Evd2Btz4nE= Received: by 10.35.49.15 with SMTP id b15mr2922905pyk; Fri, 02 Jun 2006 15:03:06 -0700 (PDT) Received: by 10.35.119.17 with HTTP; Fri, 2 Jun 2006 15:03:06 -0700 (PDT) Message-ID: Date: Fri, 2 Jun 2006 19:03:06 -0300 From: "Donald Teed" To: freebsd-questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <20060602164309.9863f9d8.bsd-unix@earthlink.net> Subject: Re: How to get networker backup software X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 22:03:08 -0000 As far as I know, the security issues are moot. The note I remember seeing said that the default configuration was problematic. If our backup server is behind a firewall, and we always config things after installing, I can't see how the security issue is relevant enough to rip it out of ports. It is far better to have a security issue awaiting resolution than to have zero backup capability. The ports skeleton we have is on one machine and shared by NFS to the rest. It is updated nightly so the old one is gone. We do have the tarball in distfiles, but I don't see a Makefile, etc. How do I find it from CVS source? Is there a pointer on where to find that? --Donald On 6/2/06, Randy Pratt wrote: > On Fri, 2 Jun 2006 16:49:09 -0300 > "Donald Teed" wrote: > > > Hi, > > > > Our institution uses networker for backups. We absolutely require > > networker client for FreeBSD. I'm astonished that it was just dropped > > from ports. > > > > I have a dozen or so machines where networker client is already > > humming along and it works well for us. I have a recently setup > > BSD box I want to add to the backup routines. Unfortunately, > > making a tar of nsr folder and copying the networker.sh script > > has not worked. We have the same 4.11 BSD on all BSD boxes. > > When I try to run nsrexecd, it dumps core. > > > > I found an old copy of the dists tarball, but that doesn't > > contain everything I'm finding in an existing install of networker > > client on another BSD box. > > > > Has anyone figured out how to support networker client > > since it was dropped from ports? > > I would think the first thing to do would be to fix the unresolved > security issues. > > http://www.freebsd.org/cgi/cvsweb.cgi/ports/sysutils/nwclient/Attic/ > > http://www.vuxml.org/freebsd/d177d9f9-e317-11d9-8088-00123f0f7307.html > > It was marked as forbidden as far back as July 2005 and apparently no > one stepped up to fix those issues and was subsequently removed from > the ports tree. It also seems that the security issues existed as far > back as 2002. > > You should be able to copy the ports skeleton(s) from your existing > machines (or get it from CVS) and build it that way. I'd just be a > bit cautious relying on software with known security issues. > > Caveat: I could be wrong on this since I don't use and have > never used this port. > > HTH, > > Randy > -- > From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 22:17:36 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43B5D16A43C for ; Fri, 2 Jun 2006 22:17:36 +0000 (UTC) (envelope-from lamont@cluepon.com) Received: from clavin.cluepon.com (clavin.cluepon.com [64.154.215.6]) by mx1.FreeBSD.org (Postfix) with ESMTP id 084AF43D45 for ; Fri, 2 Jun 2006 22:17:35 +0000 (GMT) (envelope-from lamont@cluepon.com) Received: from lamont by clavin.cluepon.com with local (Exim 3.03 #1) id 1FmHxQ-000HNE-00; Fri, 02 Jun 2006 15:17:28 -0700 Date: Fri, 2 Jun 2006 15:17:28 -0700 From: Lamont Lucas To: Erik =?iso-8859-1?Q?N=F8rgaard?= Message-ID: <20060602221728.GO46634@clavin.cluepon.com> References: <20060602025341.GH46634@clavin.cluepon.com> <448045DD.3070605@locolomo.org> <20060602185018.GK46634@clavin.cluepon.com> <448099AB.20906@locolomo.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <448099AB.20906@locolomo.org> Organization: Cluepon Consulting, Inc. User-Agent: Mutt/1.5.4i Cc: Lamont Lucas , questions@freebsd.org Subject: Re: 6.1 jumpstart issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 22:17:41 -0000 On Fri, Jun 02, 2006 at 10:03:55PM +0200, Erik Nørgaard wrote: > Maybe I did not make myself clear, my idea is that if you disable the > installCommit you will get back to the interactive sysinstall and you > can run over the menus to see if things are actually set as you want. Ah, I did not understand your suggestion. Thanks for the clarification. Going through the source the dist seems to be named "kernels", which matches the directory name on the ftp server. As per your suggestion, I selected the minimial install via my install.cfg, and it did install a kernel. So something appears to be broken about manually making a custom dist and selecting the kernels package. I will investigate further and file a PR. -- - Lamont "I am not an atomic playboy." From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 22:54:35 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B663816A46A for ; Fri, 2 Jun 2006 22:54:35 +0000 (UTC) (envelope-from carpetsmoker@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.186]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F6EC43D49 for ; Fri, 2 Jun 2006 22:54:34 +0000 (GMT) (envelope-from carpetsmoker@gmail.com) Received: by nf-out-0910.google.com with SMTP id l37so1209210nfc for ; Fri, 02 Jun 2006 15:54:33 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:to:subject:content-type:mime-version:references:content-transfer-encoding:message-id:in-reply-to:user-agent:from; b=gnVVSmfiSPL50+WvBT4l84N5kmYWu/WbKLmLu5J1PiK1RSORTVO7dHsQoXAjDvkCMZfqNT2M12j4EA7+q7+v2Q8oifI0ELaOKZV4X7cVECJ/8nKn0EQvDlDsWMQVAFrLqYzxkOj+Cb+MEua3Optfu8W/eafsjvE+g2w8y1ro49w= Received: by 10.49.39.19 with SMTP id r19mr1034403nfj; Thu, 01 Jun 2006 09:42:04 -0700 (PDT) Received: from carpetsmoker.ictwerkplaats.org ( [80.126.94.163]) by mx.gmail.com with ESMTP id o45sm1487722nfa.2006.06.01.09.42.01; Thu, 01 Jun 2006 09:42:04 -0700 (PDT) Date: Thu, 01 Jun 2006 18:40:12 -0000 To: "mehmet gogebakan" , questions@freebsd.org Content-Type: text/plain; format=flowed; delsp=yes; charset=us-ascii MIME-Version: 1.0 References: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> Content-Transfer-Encoding: Quoted-Printable Message-ID: In-Reply-To: <17381E8E9F6500459D22180DE4C48CCD03CB1E@mail.neu.edu.tr> User-Agent: Opera Mail/9.00 (FreeBSD) From: Martin Tournoy Cc: Subject: Re: release 6.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 22:54:35 -0000 On Wed, 31 May 2006 12:49:42 -0000, mehmet gogebakan = wrote: > i would like to install 6.1-RELEASE to my computer , configuration is:= > 128 MB SDRAM > LG cdrom 52x > 8 MB Grafic card > 40 gb hd > p3 800 mhz processor > azza motherboard > could you please tell me whether this configuration is suitable, if n= ot = > tell me the minimum configuration it should be.. > thanx.... > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = > "freebsd-questions-unsubscribe@freebsd.org" I prepared the following computer for my brother a while ago: AMD K-7-2 300 MHz (super socket 7, i586 with some i686 features) 128 MB RAM 32 MB Graphic card The system runs on FreeBSD 6.0 (system demands for 6.1 didn't change alo= t, = if they changed at all) with Fluxbox as the window manager and XFCE4-pan= el = to provide a "windows-like" panel. I see alot of computers, and this one actually runs faster then most = pentium 4 computers with windows xp. And not to forget, jus as easy, if not easyer... From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 23:14:53 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 89E4A16A421 for ; Fri, 2 Jun 2006 23:14:53 +0000 (UTC) (envelope-from terrio@hal.rescomp.berkeley.edu) Received: from rescomp.berkeley.edu (keyserver.Rescomp.Berkeley.EDU [169.229.70.167]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6248F43D45 for ; Fri, 2 Jun 2006 23:14:53 +0000 (GMT) (envelope-from terrio@hal.rescomp.berkeley.edu) Received: by rescomp.berkeley.edu (Postfix, from userid 1232) id 426805B770; Fri, 2 Jun 2006 16:14:51 -0700 (PDT) Date: Fri, 2 Jun 2006 16:14:51 -0700 From: Devin Heckman To: freebsd-questions@freebsd.org Message-ID: <20060602231451.GA18733@rescomp.berkeley.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.9i Subject: IPSec, ipfw, and natd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 23:14:53 -0000 Hi, I recently tried to set up a computer to act as a NAT using FreeBSD 6.1. ipfw functions as it should, as well as IPSec, but I've run into some problems when setting up the NAT. I have two computers behind it, both of which do not need to speak IPSec (and aren't configured to do so). The NAT computer should speak IPSec with one other computer, from which it mounts home directories via NFS. When I enable natd, ipfw, and IPSec, the connection to the computer with which I speak IPSec breaks, but the NAT functions properly (can ping everything except the IPSec-speaking NFS server). My ipfw rules look like this: $cmd 0001 allow udp from any to any isakmp $cmd 0002 allow esp from $ipsec_servers to me $cmd 0003 allow ah from $ipsec_servers to me $cmd 0004 divert natd all from any to any via sis0 ... $cmd 0015 allow icmp from any to any $cmd 9900 allow all from me to any $cmd 9910 allow all from any to any established $cmd 9999 deny log all from any to me And natd.conf, which is called when natd is started in the rc scripts, looks like this: port 8668 interface sis0 log yes Does anyone have any experience with problems such as this? Feel free to ask for anything else that may clarify the problem. Thanks, -- Devin Heckman From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 23:51:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E610516A41F for ; Fri, 2 Jun 2006 23:51:08 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.239]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8BC8243D46 for ; Fri, 2 Jun 2006 23:51:08 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wr-out-0506.google.com with SMTP id i20so628507wra for ; Fri, 02 Jun 2006 16:51:08 -0700 (PDT) Received: by 10.54.107.8 with SMTP id f8mr2425875wrc; Fri, 02 Jun 2006 16:51:08 -0700 (PDT) Received: from scorpio ( [216.45.217.148]) by mx.gmail.com with ESMTP id 25sm2228677wra.2006.06.02.16.51.07; Fri, 02 Jun 2006 16:51:07 -0700 (PDT) Date: Fri, 2 Jun 2006 19:50:57 -0400 (EDT) From: "Gerard E. Seibert" To: FreeBSD-Questions Message-ID: <20060602194701.W1096@seibercom.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Subject: Sound Problem in KDE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: "Gerard E. Seibert" List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 23:51:09 -0000 Upon completion of a fresh installation of KDE on FreeBSD 6.1, I have been unable to get the sound to work correctly in KDE. Upon starting up of KDE, this error message is displayed: Sound server informational message: Error while initializing the sound driver: device /dev/dsp can't be opened (Device busy) The sound server will continue, using the null output device. I have tried rebooting the system, but the problem remains. since KDE did work with FSBD 5.4 on this PC, I am not sure what the problem might me. -- Gerard Seibert gerard@seibercom.net From owner-freebsd-questions@FreeBSD.ORG Fri Jun 2 23:54:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C69E516A421 for ; Fri, 2 Jun 2006 23:54:52 +0000 (UTC) (envelope-from freebsd@sopwith.solgatos.com) Received: from schitzo.solgatos.com (pool-71-117-252-190.ptldor.fios.verizon.net [71.117.252.190]) by mx1.FreeBSD.org (Postfix) with ESMTP id 36A0043D58 for ; Fri, 2 Jun 2006 23:54:49 +0000 (GMT) (envelope-from freebsd@sopwith.solgatos.com) Received: from schitzo.solgatos.com (localhost.home.localnet [127.0.0.1]) by schitzo.solgatos.com (8.13.6/8.13.4) with ESMTP id k52NsmfP018820; Fri, 2 Jun 2006 16:54:48 -0700 Received: from sopwith.solgatos.com (uucp@localhost) by schitzo.solgatos.com (8.13.6/8.13.4/Submit) with UUCP id k52NsmCK018817; Fri, 2 Jun 2006 16:54:48 -0700 Received: from localhost by sopwith.solgatos.com (8.8.8/6.24) id XAA07715; Fri, 2 Jun 2006 23:45:18 GMT Message-Id: <200606022345.XAA07715@sopwith.solgatos.com> To: freebsd-questions@freebsd.org, arsptr@optusnet.com.au Date: Fri, 02 Jun 2006 16:45:18 +0100 From: Dieter Cc: Subject: Re: Filesystem corruption when drives are mirrored, but not otherwise X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd@sopwith.solgatos.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jun 2006 23:54:52 -0000 > It seems that this was caused by the (infamous) problem when > softupdates and write caching are both enabled. Disabling write > caching seems to have fixed the problem. Interesting. The disk write cache being on should only cause problems if the system goes down hard/unclean, e.g. power failure. Unless the disk firmware has a bug? Anyway the disk write cache should be off, since even a UPS can't guarantee that the system will not go down hard. > Unfortunately the disk write performance is woeful. There must > be a better way surely? I think that getting NCQ support would help greatly. There are also problems like the one with nforce4 and some brands of disks: http://forums.nvidia.com/lofiversion/index.php?t8171.html It is not obvious what any of this would have to do with mirroring vs. not mirroring. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 00:27:00 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EBF8B16A420 for ; Sat, 3 Jun 2006 00:27:00 +0000 (UTC) (envelope-from v.velox@vvelox.net) Received: from mail07.powweb.com (mail07.powweb.com [66.152.97.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id B0FAF43D46 for ; Sat, 3 Jun 2006 00:27:00 +0000 (GMT) (envelope-from v.velox@vvelox.net) Received: from vixen42.vulpes (24-119-225-24.cpe.cableone.net [24.119.225.24]) by mail07.powweb.com (Postfix) with ESMTP id 1EA5B14DA13; Fri, 2 Jun 2006 17:26:58 -0700 (PDT) Date: Fri, 2 Jun 2006 19:28:55 -0500 From: Vulpes Velox To: Lorin Lund Message-ID: <20060602192855.3b84d24d@vixen42.vulpes> In-Reply-To: <447FD5CC.5050701@infowest.com> References: <447FD5CC.5050701@infowest.com> X-Mailer: Sylpheed-Claws 2.2.0 (GTK+ 2.8.17; i386-portbld-freebsd5.4) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Can't make wi0: work on Toshiba notebook with mini-PCI network card. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 00:27:01 -0000 On Fri, 02 Jun 2006 00:08:12 -0600 Lorin Lund wrote: > I have a Toshiba Satelite Pro 6100 with a Toshiba mini-PCI wireless > network card. > The wireless stuff seems to be there (for as much as I know) > This is a dual boot machine. When booted as Windows XP it connects > and works > just fine. > > I see that ifconfig -a shows the right IP address. But there is a > lot more info there > and I don't know what values are supposed to be there. > > The wireless access point is 192.168.0.1 > > > > ++++ dmesg +++++ > wi0: at port 0xd000-0xd03f irq 11 > function 0 config 1 on pccard0 > wi0: using Lucent Embedded WaveLAN/IEEE > wi0: Lucent Firmware: Station (8.10.1) > wi0: Ethernet address: 00:02:2d:57:72:77 > > ++++ from /etc/rc.conf +++++ > ifconfig_wi0="inet 192.168.0.20 netmask 255.255.255.0 ssid > TBJTRUCKING wepmode on wepkey 0xzzzzzzzzzzzzzzzzzzzzzzzzzz" You need to tell it what key to use. Add this in... weptxkey 1. I remember coming across the same thing after moving my laptop from releng_5 to 6. > +++++ ifconfig -a +++++ > > fxp0: flags=8802 mtu 1500 > options=8 > ether 00:00:39:9e:58:d0 > media: Ethernet autoselect (none) > status: no carrier > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 > inet 127.0.0.1 netmask 0xff000000 > wi0: flags=8843 mtu 1500 > inet6 fe80::202:2dff:fe57:7277%wi0 prefixlen 64 scopeid 0x3 > inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255 > ether 00:02:2d:57:72:77 > media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps) > status: associated > ssid TBJTRUCKING channel 1 bssid 00:15:05:12:74:43 > stationname "FreeBSD WaveLAN/IEEE node" > authmode OPEN privacy MIXED deftxkey UNDEF wepkey 1:104-bit > txpowmax 100 bintval 100 > > ++++ ping ++++++ > > PING 192.168.0.1 (192.168.0.1): 56 data bytes > > --- 192.168.0.1 ping statistics --- > 4 packets transmitted, 0 packets received, 100% packet los > > > --------- > when I try to kldload if_wi it seems to already be loaded. > when I do kldstat it doesn't show as a loaded module. > So I think the wi stuff is compiled into the kernel. That is why > I've commented out the if_wi load. > I'm using 6.1 RELEASE generic kernel > +++++ /boot/loader.conf +++++ > #if_wi_load="YES" > wlan_wep_load="YES" > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 00:48:58 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E2FE16A41F for ; Sat, 3 Jun 2006 00:48:58 +0000 (UTC) (envelope-from duane@dwpc.dwlabs.ca) Received: from smtpout.eastlink.ca (smtpout.eastlink.ca [24.222.0.30]) by mx1.FreeBSD.org (Postfix) with ESMTP id 272EE43D45 for ; Sat, 3 Jun 2006 00:48:55 +0000 (GMT) (envelope-from duane@dwpc.dwlabs.ca) Received: from ip01.eastlink.ca ([24.222.10.5]) by mta01.eastlink.ca (Sun Java System Messaging Server 6.2-4.03 (built Sep 22 2005)) with ESMTP id <0J09009WUEA3SU30@mta01.eastlink.ca> for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 21:49:15 -0300 (ADT) Received: from blk-224-199-230.eastlink.ca (HELO dwpc.dwlabs.ca) ([24.224.199.230]) by ip01.eastlink.ca with ESMTP; Fri, 02 Jun 2006 21:48:54 -0300 Received: from dwpc.dwlabs.ca (localhost [127.0.0.1]) by dwpc.dwlabs.ca (8.13.6/8.13.6) with ESMTP id k530mDMb001512; Fri, 02 Jun 2006 21:48:13 -0300 (ADT envelope-from duane@dwpc.dwlabs.ca) Received: (from duane@localhost) by dwpc.dwlabs.ca (8.13.6/8.13.4/Submit) id k530mCfK001511; Fri, 02 Jun 2006 21:48:12 -0300 (ADT envelope-from duane) Date: Fri, 02 Jun 2006 21:48:12 -0300 From: Duane Whitty In-reply-to: <20060602194701.W1096@seibercom.net> To: "Gerard E. Seibert" Message-id: <20060603004812.GA1153@dwpc.dwlabs.ca> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline X-BrightmailFiltered: true X-Brightmail-Tracker: AAAAAQAAA+k= References: <20060602194701.W1096@seibercom.net> User-Agent: Mutt/1.4.2.1i Cc: freebsd-questions@freebsd.org Subject: Re: Sound Problem in KDE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 00:48:58 -0000 On Fri, Jun 02, 2006 at 07:50:57PM -0400, Gerard E. Seibert wrote: > Upon completion of a fresh installation of KDE on FreeBSD 6.1, I have been > unable to get the sound to work correctly in KDE. Upon starting up of KDE, > this error message is displayed: > > Sound server informational message: > Error while initializing the sound driver: > device /dev/dsp can't be opened (Device busy) > The sound server will continue, using the null output device. > > I have tried rebooting the system, but the problem remains. since KDE did > work with FSBD 5.4 on this PC, I am not sure what the problem might me. > > Hi, I recently had a similar problem in KDE. The way I tracked it down was to fstat|grep dsp in order to see what had the device file open. What prompted this was I had been running skype and, after being disconnected, I was unable to reconnect. It turned out that konqueror had grabbed the device when I played a media file and hadn't released it afterward. Hope this helps, Duane Whitty -- duane@dwlabs.ca > -- > Gerard Seibert > gerard@seibercom.net > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 02:13:47 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B3A8716A421 for ; Sat, 3 Jun 2006 02:13:47 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-satin.atl.sa.earthlink.net (pop-satin.atl.sa.earthlink.net [207.69.195.63]) by mx1.FreeBSD.org (Postfix) with ESMTP id 61B8143D46 for ; Sat, 3 Jun 2006 02:13:47 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeeble.com) by pop-satin.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1FmLe6-0000V0-00 for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 22:13:46 -0400 Date: Fri, 2 Jun 2006 22:14:29 -0400 From: Randy Pratt To: freebsd-questions@freebsd.org Message-Id: <20060602221429.79e9f748.bsd-unix@earthlink.net> In-Reply-To: References: <20060602164309.9863f9d8.bsd-unix@earthlink.net> X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: How to get networker backup software X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 02:13:47 -0000 On Fri, 2 Jun 2006 19:01:38 -0300 "Donald Teed" wrote: > As far as I know, the security issues are moot. The note > I remember seeing said that the default configuration > was problematic. If our backup server is behind a firewall, > and we always config things after installing, I can't > see how the security issue is relevant enough to rip > it out of ports. It is far better to have a security issue > awaiting resolution than to have zero backup capability. > > The ports skeleton we have is on one machine and > shared by NFS to the rest. It is updated nightly so > the old one is gone. We do have the tarball > in distfiles, but I don't see a Makefile, etc. > > How do I find it from CVS source? Is there a pointer on > where to find that? You could get a complete tree just before the port was removed by setting a date in a cvsup file. Its been awhile since I've done this but here's a modified example from an old file I still had: *default host=cvsup4.FreeBSD.org (or whatever) *default base=/usr/oldtree *default prefix=/home/oldtree *default release=cvs *default delete use-rel-suffix *default date=2006.03.31.00.00.00 *default compress ports-all I think that date is about 8 hours before the ports were removed from the tree but you might want to check the dates of any other ports you might need to be sure the date is correct for what you need. You can check these with cvsweb: http://www.freebsd.org/cgi/cvsweb.cgi/ Note that the base and prefix are different so that you don't clobber your existing ports tree. Choose something appropriate for your situation. Instead of using "ports-all", you might save some bandwidth by only selecting the ports modules you need. They are listed in: /usr/share/examples/cvsup/ports-supfile You would have selected entries in your supfile like: ports-base ports-sysutils After that, just cvsup using the new supfile. That should get what is needed and then you'll be able to add them to your NFS tree. It sounds like you're quite familar with these ports. Perhaps if you can get them security patched you might consider becoming the maintainer for the ports and get them back in the tree. Perhaps this will get you closer to where you need to be. If anyone spots anything I missed, be sure to comment. Randy -- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 02:31:14 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C7A3616A471 for ; Sat, 3 Jun 2006 02:31:14 +0000 (UTC) (envelope-from nb_root@videotron.ca) Received: from relais.videotron.ca (relais.videotron.ca [24.201.245.36]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3B5A043D5C for ; Sat, 3 Jun 2006 02:31:12 +0000 (GMT) (envelope-from nb_root@videotron.ca) Received: from clk01a ([66.130.198.54]) by VL-MO-MR004.ip.videotron.ca (Sun Java System Messaging Server 6.2-2.05 (built Apr 28 2005)) with ESMTP id <0J09002Z3IZZPWC0@VL-MO-MR004.ip.videotron.ca> for freebsd-questions@freebsd.org; Fri, 02 Jun 2006 22:31:12 -0400 (EDT) Date: Fri, 02 Jun 2006 22:31:04 -0400 From: Nicolas Blais In-reply-to: <20060602194701.W1096@seibercom.net> To: freebsd-questions@freebsd.org, "Gerard E. Seibert" Message-id: <200606022231.10157.nb_root@videotron.ca> MIME-version: 1.0 Content-type: multipart/signed; boundary=nextPart3184143.d9oq3EJx46; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-transfer-encoding: 7bit References: <20060602194701.W1096@seibercom.net> User-Agent: KMail/1.9.1 Cc: Subject: Re: Sound Problem in KDE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 02:31:14 -0000 --nextPart3184143.d9oq3EJx46 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Friday 02 June 2006 19:50, Gerard E. Seibert wrote: > Upon completion of a fresh installation of KDE on FreeBSD 6.1, I have been > unable to get the sound to work correctly in KDE. Upon starting up of KDE, > this error message is displayed: > > Sound server informational message: > Error while initializing the sound driver: > device /dev/dsp can't be opened (Device busy) > The sound server will continue, using the null output device. > > I have tried rebooting the system, but the problem remains. since KDE did > work with FSBD 5.4 on this PC, I am not sure what the problem might me. You haven't provided a lot of information (sound card, dmesg etc...) but tr= y=20 this: Add this in your /etc/sysctl.conf file: hw.snd.pcm0.vchans=3D4 hw.snd.maxautovchans=3D4 Nicolas. =2D-=20 =46reeBSD 7.0-CURRENT #0: Sat May 27 11:58:25 EDT 2006 =20 root@clk01a:/usr/obj/usr/src/sys/CLK01A=20 PGP? : http://www.clkroot.net/security/nb_root.asc --nextPart3184143.d9oq3EJx46 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (FreeBSD) iD8DBQBEgPRu4wTBlvcsbJURAkosAJ0TJMgNyzwXcIcOsvxg7xVSREk/oACgt+eQ glp3ulEt9nZI+eKnb5laNaI= =K6Jc -----END PGP SIGNATURE----- --nextPart3184143.d9oq3EJx46-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 02:36:55 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4F35B16A473 for ; Sat, 3 Jun 2006 02:36:55 +0000 (UTC) (envelope-from talonz@gmail.com) Received: from mail.richardflanagan.com.au (gateway.richardflanagan.com.au [203.149.71.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id E6EB543D46 for ; Sat, 3 Jun 2006 02:36:54 +0000 (GMT) (envelope-from talonz@gmail.com) Received: from [203.222.143.176] (unknown [203.222.143.176]) by mail.richardflanagan.com.au (Postfix) with ESMTP id DDEEC218B78 for ; Sat, 3 Jun 2006 12:37:11 +1000 (EST) Message-ID: <4480F5A4.5080305@gmail.com> Date: Sat, 03 Jun 2006 12:36:20 +1000 From: talonz User-Agent: Thunderbird 1.5.0.2 (X11/20060515) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: http://www.freebsd.org.au/ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 02:36:56 -0000 Hi All, Is there some reason http://www.freebsd.org.au/ is not mirrored. I would be more than happy to host and mirror the freebsd web page in Australia. Someone should have the .au page up and running, Anything I can do to help please contact me. t a l o n z [a t] g m a i l . c o m j m c a l p i n e [a t] r i c h a r d f l a n a g a n a n d c o m p a n y . c o m . a u Best Regards Jason M From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 03:37:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A53A816A41F for ; Sat, 3 Jun 2006 03:37:13 +0000 (UTC) (envelope-from surfbass@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.188]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0D67443D46 for ; Sat, 3 Jun 2006 03:37:12 +0000 (GMT) (envelope-from surfbass@gmail.com) Received: by nf-out-0910.google.com with SMTP id l37so1233937nfc for ; Fri, 02 Jun 2006 20:37:11 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=OVOOb23/YXif1prGo53xyepKok4byBlUJuCn07DMcqu7vi7ptgO2RKjkoROOYWNPerhpoX9KsQzqCVuTznMWNafu1M6fzutitilNDged/yuu4XxymIsVDLTU5emGBDNVhApDy0kWAsFiYfi+7S3c3xW9BvxB5MzFVQFmlYe5AxY= Received: by 10.48.255.7 with SMTP id c7mr1287823nfi; Fri, 02 Jun 2006 20:37:10 -0700 (PDT) Received: by 10.49.9.13 with HTTP; Fri, 2 Jun 2006 20:37:10 -0700 (PDT) Message-ID: <52d917a60606022037w24db6b8aod2b0a654e8132c4f@mail.gmail.com> Date: Fri, 2 Jun 2006 20:37:10 -0700 From: surfbass To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: porno site using old devil logo...thought you should know X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 03:37:13 -0000 Thought you might like to know, but keep my email anonymous please; I trust you guys enough that i dont need to spoof it. I know I wouldn't want a logo for such a fine product associated with a porno site. http://www.celebritytemptation.com/images/11frontpageimages/devil.jpg cheers. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 04:35:18 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 89A8516A420 for ; Sat, 3 Jun 2006 04:35:18 +0000 (UTC) (envelope-from herriojr@gmail.com) Received: from nf-out-0910.google.com (nf-out-0910.google.com [64.233.182.190]) by mx1.FreeBSD.org (Postfix) with ESMTP id BE6F343D45 for ; Sat, 3 Jun 2006 04:35:17 +0000 (GMT) (envelope-from herriojr@gmail.com) Received: by nf-out-0910.google.com with SMTP id l37so1238172nfc for ; Fri, 02 Jun 2006 21:35:16 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=aILjqtRFZcPOHc0em9UlcIj8vIYHVUzIDCYFYW6DXND/LwXX18tZ+jJuHG6C+5PftZPqTuwBM+JouSfCF3Rww8dICYHrUIRwDnqxRJyne+iZ/Fha9wZueSs9CVj7nmacC3JTjkwBTLNYyt5DPjDVE7R5Rz3cuZyirmrhJ0L/tzs= Received: by 10.49.58.9 with SMTP id l9mr1339387nfk; Fri, 02 Jun 2006 21:35:16 -0700 (PDT) Received: by 10.49.37.10 with HTTP; Fri, 2 Jun 2006 21:35:16 -0700 (PDT) Message-ID: <6a56d69c0606022135k1784b8eck65bc1d54517bb5ad@mail.gmail.com> Date: Sat, 3 Jun 2006 04:35:16 +0000 From: "Jonathan Herriott" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Building Kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 04:35:18 -0000 Hi, I'm having trouble rebuilding my kernel (first time). It's actually happening in a linking stage. I tried deleting all of my /usr/src directory and using cvsup to get a fresh stable copy, but it's still wigging out. The method I am using is "make buildkernel KERNCONF=MYKERNEL." Here's the portion that has the problem: ... MAKE=make sh /usr/src/sys/conf/newvers.sh FAST cc -c -O2 -pipe -fno-strict-aliasing -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -fformat-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=8000 --param inline-unit-growth=100 --param large-function-growth=1000 -mno-align-long-strings -mpreferred-stack-boundary=2 -mno-mmx -mno-3dnow -mno-sse -mno-sse2 -mno-sse3 -ffreestanding -Werror vers.c linking kernel sbp.o(.text+0x2b8): In function `sbp_post_busreset': : undefined reference to `xpt_freeze_simq' sbp.o(.text+0x440): In function `sbp_free_ocb': : undefined reference to `xpt_release_devq' sbp.o(.text+0x4b4): In function `sbp_cam_scan_lun': : undefined reference to `xpt_setup_ccb' sbp.o(.text+0x4bd): In function `sbp_cam_scan_lun': : undefined reference to `xpt_action' sbp.o(.text+0x4cc): In function `sbp_cam_scan_lun': : undefined reference to `xpt_release_devq' sbp.o(.text+0x573): In function `sbp_cam_scan_target': : undefined reference to `xpt_setup_ccb' sbp.o(.text+0x598): In function `sbp_cam_scan_target': : undefined reference to `xpt_action' sbp.o(.text+0x5a7): In function `sbp_cam_scan_target': : undefined reference to `xpt_release_devq' sbp.o(.text+0x668): In function `sbp_do_attach': : undefined reference to `xpt_periph' sbp.o(.text+0x671): In function `sbp_do_attach': : undefined reference to `xpt_create_path' sbp.o(.text+0x76f): In function `sbp_agent_reset_callback': : undefined reference to `xpt_release_devq' sbp.o(.text+0xa0a): In function `sbp_orb_pointer': : undefined reference to `xpt_done' sbp.o(.text+0x166a): In function `sbp_action': : undefined reference to `xpt_done' sbp.o(.text+0x16c2): In function `sbp_action': : undefined reference to `cam_calc_geometry' sbp.o(.text+0x1acd): In function `sbp_action': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x1bd9): In function `sbp_abort_all_ocbs': : undefined reference to `xpt_done' sbp.o(.text+0x1c6e): In function `sbp_cam_detach_sdev': : undefined reference to `xpt_release_devq' sbp.o(.text+0x1c83): In function `sbp_cam_detach_sdev': : undefined reference to `xpt_async' sbp.o(.text+0x1c8b): In function `sbp_cam_detach_sdev': : undefined reference to `xpt_free_path' sbp.o(.text+0x1d4a): In function `sbp_detach': : undefined reference to `xpt_async' sbp.o(.text+0x1d52): In function `sbp_detach': : undefined reference to `xpt_free_path' sbp.o(.text+0x1d60): In function `sbp_detach': : undefined reference to `xpt_bus_deregister' sbp.o(.text+0x1d6a): In function `sbp_detach': : undefined reference to `cam_sim_free' sbp.o(.text+0x2245): In function `sbp_recv': : undefined reference to `xpt_done' sbp.o(.text+0x23fa): In function `sbp_recv': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x2ace): In function `sbp_timeout': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x2b08): In function `sbp_timeout': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x3141): In function `sbp_post_explore': : undefined reference to `xpt_release_simq' sbp.o(.text+0x32a2): In function `sbp_post_explore': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x35d6): In function `sbp_post_explore': : undefined reference to `xpt_freeze_devq' sbp.o(.text+0x37a4): In function `sbp_attach': : undefined reference to `cam_simq_alloc' sbp.o(.text+0x37f5): In function `sbp_attach': : undefined reference to `cam_sim_alloc' sbp.o(.text+0x380d): In function `sbp_attach': : undefined reference to `xpt_bus_register' sbp.o(.text+0x3827): In function `sbp_attach': : undefined reference to `xpt_periph' sbp.o(.text+0x3830): In function `sbp_attach': : undefined reference to `xpt_create_path' sbp.o(.text+0x38fb): In function `sbp_attach': : undefined reference to `xpt_async' sbp.o(.text+0x3910): In function `sbp_attach': : undefined reference to `xpt_bus_deregister' sbp.o(.text+0x391b): In function `sbp_attach': : undefined reference to `cam_sim_free' sbp.o(.text+0x394d): In function `sbp_attach': : undefined reference to `cam_simq_free' umass.o(.text+0xef3): In function `umass_cam_rescan_callback': : undefined reference to `xpt_free_path' umass.o(.text+0xf3d): In function `umass_cam_rescan': : undefined reference to `xpt_periph' umass.o(.text+0xf46): In function `umass_cam_rescan': : undefined reference to `xpt_create_path' umass.o(.text+0xf67): In function `umass_cam_rescan': : undefined reference to `xpt_setup_ccb' umass.o(.text+0xf82): In function `umass_cam_rescan': : undefined reference to `xpt_action' umass.o(.text+0xfa8): In function `umass_cam_detach_sim': : undefined reference to `xpt_bus_deregister' umass.o(.text+0xfbc): In function `umass_cam_detach_sim': : undefined reference to `cam_sim_free' umass.o(.text+0x12ff): In function `umass_attach': : undefined reference to `cam_simq_alloc' umass.o(.text+0x132f): In function `umass_attach': : undefined reference to `cam_sim_alloc' umass.o(.text+0x1343): In function `umass_attach': : undefined reference to `cam_simq_free' umass.o(.text+0x1496): In function `umass_attach': : undefined reference to `xpt_bus_register' umass.o(.text+0x16a5): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x16d9): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1726): In function `umass_cam_action': : undefined reference to `cam_calc_geometry' umass.o(.text+0x172c): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1a18): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x1a49): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x1b3e): In function `umass_cam_sense_cb': : undefined reference to `xpt_done' umass.o(.text+0x1b55): In function `umass_cam_sense_cb': : undefined reference to `xpt_done' umass.o(.text+0x1c17): more undefined references to `xpt_done' follow *** Error code 1 Stop in /usr/obj/usr/src/sys/MYKERNEL. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. Any ideas on what I might be doing wrong? Thanks! From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 05:34:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CA40516A41F for ; Sat, 3 Jun 2006 05:34:36 +0000 (UTC) (envelope-from snow@aanet.com.au) Received: from mail.aanet.com.au (mail.aanet.com.au [202.63.43.131]) by mx1.FreeBSD.org (Postfix) with SMTP id F03A743D45 for ; Sat, 3 Jun 2006 05:34:35 +0000 (GMT) (envelope-from snow@aanet.com.au) Received: (qmail 8992 invoked by uid 89); 3 Jun 2006 05:34:38 -0000 Received: by simscan 1.2.0 ppid: 8863, pid: 8969, t: 0.2340s scanners: attach: 1.2.0 clamav: 0.88.1/m:37/d:1390 Received: from cust2534.qld01.dataco.com.au (HELO ?192.168.1.13?) (202.63.53.230) by mail.aanet.com.au with SMTP; 3 Jun 2006 05:34:38 -0000 Message-ID: <44811F78.3080404@aanet.com.au> Date: Sat, 03 Jun 2006 15:34:48 +1000 From: Snow User-Agent: Thunderbird 1.5.0.2 (Windows/20060308) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <6a56d69c0606022135k1784b8eck65bc1d54517bb5ad@mail.gmail.com> In-Reply-To: <6a56d69c0606022135k1784b8eck65bc1d54517bb5ad@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Building Kernel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 05:34:36 -0000 Jonathan Herriott wrote: > Hi, > > I'm having trouble rebuilding my kernel (first time). It's actually > happening in a linking stage. I tried deleting all of my /usr/src > directory > and using cvsup to get a fresh stable copy, but it's still wigging > out. The > method I am using is "make buildkernel KERNCONF=MYKERNEL." Here's the > portion that has the problem: > Just a guess, did you include: device scbus device da (and maybe device pass) in your kernel configuration? umass devices require them. > > Any ideas on what I might be doing wrong? > > Thanks! From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 07:24:25 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4077516A4CB for ; Sat, 3 Jun 2006 07:24:25 +0000 (UTC) (envelope-from a@zeos.net) Received: from mailgate.kv.ukrtel.net (mailgate.kv.ukrtel.net [213.179.244.11]) by mx1.FreeBSD.org (Postfix) with ESMTP id ACB5F43D48 for ; Sat, 3 Jun 2006 07:24:21 +0000 (GMT) (envelope-from a@zeos.net) Received: from localhost (localhost.kv.ukrtel.net [127.0.0.1]) by localhost (Postfix) with SMTP id 112A21AF52C for ; Sat, 3 Jun 2006 10:24:19 +0300 (EEST) Received: from localhost.my.domain (170-16-207-82.pool.ukrtel.net [82.207.16.170]) by mailgate.kv.ukrtel.net (Postfix) with ESMTP id AAP6C4481392225F5 for ; Sat, 3 Jun 2006 10:24:18 +0300 (EEST) Received: from localhost.my.domain (localhost [127.0.0.1]) by localhost.my.domain (8.13.6/8.13.6) with ESMTP id k537OBKg004389 for ; Sat, 3 Jun 2006 10:24:11 +0300 (EEST) (envelope-from a@zeos.net) Received: (from elisej@localhost) by localhost.my.domain (8.13.6/8.13.6/Submit) id k537OAlx004388 for freebsd-questions@freebsd.org; Sat, 3 Jun 2006 10:24:10 +0300 (EEST) (envelope-from a@zeos.net) X-Authentication-Warning: localhost.my.domain: elisej set sender to a@zeos.net using -f Date: Sat, 3 Jun 2006 10:24:10 +0300 From: a@zeos.net To: freebsd-questions@freebsd.org Message-ID: <20060603072410.GA4329@localhost> Mail-Followup-To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline User-Agent: mutt-ng/devel-r581 (FreeBSD) Subject: Can one user have more than one system mailboxes? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 07:24:25 -0000 Can a user have more than one system mailbox? E. g., some ISP provides the next service: a client can make any number of mailboxes for himself using web interface. Almost all ISP are using UNIX. So, how they do this? Does that web interface create a new system user every time I create a new mailbox? I have sendmail 8.13.6 on FreeBSD 6.1-RELEASE. Elisej Babenko From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 08:47:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E655016A422 for ; Sat, 3 Jun 2006 08:47:19 +0000 (UTC) (envelope-from talonz@gmail.com) Received: from mail.richardflanagan.com.au (gateway.richardflanagan.com.au [203.149.71.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0D2A643D49 for ; Sat, 3 Jun 2006 08:47:18 +0000 (GMT) (envelope-from talonz@gmail.com) Received: from [203.222.143.176] (unknown [203.222.143.176]) by mail.richardflanagan.com.au (Postfix) with ESMTP id 7C7D7218B78 for ; Sat, 3 Jun 2006 18:47:35 +1000 (EST) Message-ID: <44814C67.4020306@gmail.com> Date: Sat, 03 Jun 2006 18:46:31 +1000 From: talonz User-Agent: Thunderbird 1.5.0.2 (X11/20060515) MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <20060603072410.GA4329@localhost> In-Reply-To: <20060603072410.GA4329@localhost> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Can one user have more than one system mailboxes? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 08:47:20 -0000 a@zeos.net wrote: > Can a user have more than one system mailbox? > > E. g., some ISP provides the next service: a client can make any number of > mailboxes for himself using web interface. > Almost all ISP are using UNIX. > So, how they do this? > Does that web interface create a new system user every time > I create a new mailbox? > > I have sendmail 8.13.6 on FreeBSD 6.1-RELEASE. > > Elisej Babenko > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > -- Check out Postfix And Virtual and some type of IMAP for multiple virtual users. There are some documents explaining the setup on the postfix homepage. Regards Jason M From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 08:57:32 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C12B916A422; Sat, 3 Jun 2006 08:57:32 +0000 (UTC) (envelope-from andreas@klemm.apsfilter.org) Received: from srv1.cosmo-project.de (srv1.cosmo-project.de [213.83.6.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9FE7D43D46; Sat, 3 Jun 2006 08:57:30 +0000 (GMT) (envelope-from andreas@klemm.apsfilter.org) Received: from srv1.cosmo-project.de (localhost [IPv6:::1]) by srv1.cosmo-project.de (8.12.10/8.12.10) with ESMTP id k538vSDE017632 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Sat, 3 Jun 2006 10:57:29 +0200 (CEST) (envelope-from andreas@klemm.apsfilter.org) Received: (from uucp@localhost) by srv1.cosmo-project.de (8.12.10/8.12.10/Submit) with UUCP id k538vSxV017631; Sat, 3 Jun 2006 10:57:28 +0200 (CEST) (envelope-from andreas@klemm.apsfilter.org) Received: from titan.klemm.apsfilter.org (localhost.klemm.apsfilter.org [127.0.0.1]) by klemm.apsfilter.org (8.13.6/8.13.4) with ESMTP id k538sn91044256; Sat, 3 Jun 2006 10:54:49 +0200 (CEST) (envelope-from andreas@titan.klemm.apsfilter.org) Received: (from andreas@localhost) by titan.klemm.apsfilter.org (8.13.6/8.13.4/Submit) id k538sn71044203; Sat, 3 Jun 2006 10:54:49 +0200 (CEST) (envelope-from andreas) Date: Sat, 3 Jun 2006 10:54:49 +0200 From: Andreas Klemm To: freebsd-questions@freebsd.org Message-ID: <20060603085449.GA8062@titan.klemm.apsfilter.org> References: <20060527182114.87FE.GERARD@seibercom.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060527182114.87FE.GERARD@seibercom.net> X-Operating-System: FreeBSD 6.1-STABLE X-Disclaimer: A free society is one where it is safe to be unpopular User-Agent: Mutt/1.5.11 Cc: andreas@freebsd.org Subject: Re: Installing Apsfilter X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 08:57:32 -0000 On Sat, May 27, 2006 at 06:28:39PM -0400, Gerard Seibert wrote: > Trying to install Apsfilter, I encountered a problem. It seems that it > requires print/acroread7 which is an interactive port. Reading the > Makefile on acroread7, it seems I have to go to > http://www.adobe.com/products/acrobat/distribute.html and fill out a > form, wait a few days to see if I am approved, and then what? > > Is this really necessary? Is there some way around this? If I follow > through with this scenario, what happens? Do I get a special code or > file to install that will allow me to install the port just so I can get > apsfilter installed? Normally you should be able to deselect pdf if you don't want it. I experience myself, that the configure script will be executed and terminated immediately. Don't know what is broken there. Andreas /// -- Andreas Klemm - Powered by FreeBSD 6 Need a magic printfilter today ? -> http://www.apsfilter.org/ From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 09:57:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5C47B16A46A for ; Sat, 3 Jun 2006 09:57:35 +0000 (UTC) (envelope-from yraffah@savola.com) Received: from heathrow.savoladns.com (heathrow.savoladns.com [212.12.174.7]) by mx1.FreeBSD.org (Postfix) with SMTP id 567C843D49 for ; Sat, 3 Jun 2006 09:57:33 +0000 (GMT) (envelope-from yraffah@savola.com) Received: from ocs.savola.com (ocs.savola.com [222.22.1.211]) by heathrow.savoladns.com (Postfix) with ESMTP id D964095849 for ; Sat, 3 Jun 2006 12:57:29 +0300 (AST) Received: from 222.22.1.191 by ocs.savola.com with ESMTP id 60857741149327921; Sat, 03 Jun 2006 12:45:21 +0300 From: Yousef Raffah To: freebsd-questions@freebsd.org Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-4gkN+AsCd/JJh1OxwPMt" Organization: The Savola Group Date: Sat, 03 Jun 2006 12:56:58 +0300 Message-Id: <1149328618.704.13.camel@localhost.savola.com> Mime-Version: 1.0 X-Mailer: Evolution 2.6.1 FreeBSD GNOME Team Port Subject: portmanager keeps on reinstalling the same port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: yraffah@savola.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 09:57:35 -0000 --=-4gkN+AsCd/JJh1OxwPMt Content-Type: text/plain Content-Transfer-Encoding: quoted-printable excuse the n00b in me but I'm trying to install a port using portmanager as installing it the traditional (make install clean) way failed and the one of the cool guys on the list here suggested to use portmanager to resolve the problem. I have synced my ports as of today morning and tried to launch: # portmanager deskutils/taskjuggler -l -f the thing is, portmanager kicks out and tries to reinstall lang/perl5.8, although it had reinstalled it earlier and I'm sure I have perl 5.8.8 installed already!. I'm not sure if this is a normal behaviour of portmanager? But I will keep on monitoring it and see if it all goes well -- Sincerely, Yousef Raffah Senior Systems Administrator -- Aren't you using Firefox? Get it at http://www.getfirefox.com --=-4gkN+AsCd/JJh1OxwPMt Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (FreeBSD) iD8DBQBEgVzqH9IXMb4e6CMRAvcNAKCw6TH+mck++UFWovKHHpo1HwC3CwCdHkkh 1s9Ci16HQhM9k2QQC7+TFYQ= =bYZF -----END PGP SIGNATURE----- --=-4gkN+AsCd/JJh1OxwPMt-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 10:09:51 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5C40916A423 for ; Sat, 3 Jun 2006 10:09:51 +0000 (UTC) (envelope-from maanjee@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.178]) by mx1.FreeBSD.org (Postfix) with ESMTP id B5F7043D48 for ; Sat, 3 Jun 2006 10:09:50 +0000 (GMT) (envelope-from maanjee@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so884940pye for ; Sat, 03 Jun 2006 03:09:50 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=ABsQeRdLsh4dmnFPEyRMsgRizNssUWkPPOphl+4x6SpgQSBzzhAe6wJ6zras/QGls46ozqWDIudiK8aXXuzz3z9NH1EQVXrBvmFACWb05m7AVln6YIiFoeRLi4gneUNRN2gXHHyY1f2NG3s4TZOPEwVthJ+H7kx7wetJB0q8Lfk= Received: by 10.35.85.1 with SMTP id n1mr3575821pyl; Sat, 03 Jun 2006 03:09:50 -0700 (PDT) Received: by 10.35.32.9 with HTTP; Sat, 3 Jun 2006 03:09:50 -0700 (PDT) Message-ID: <2cd0a0da0606030309y363dd8c6o9b5cd5d4b6366b46@mail.gmail.com> Date: Sat, 3 Jun 2006 12:09:50 +0200 From: "Maan Jee" To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Help: Novice - Hardware Advice! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 10:09:51 -0000 Hello friends and fellows Today, I wanna have some hardware advice: I wanna build A super duper FreeBSD Web Server Box with apache2, mysql5, php, etc. But I am just unsure about what kind of hardware I should buy since I am not having a big budget but do have a reasonable.... There gonna be many database queries load fetching data from mysql-server. What kind of Hardware I should buy? 1. Motherboad? 2. Processor? 3. RAM? (What kind of and how much should be reasonable enough) 4. Storage System? I am looking for a solution with very reasonable cost and best efficiency :o) -- Thanks! BR / mj From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 10:34:16 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 69E8F16A41F for ; Sat, 3 Jun 2006 10:34:16 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7A7A143D49 for ; Sat, 3 Jun 2006 10:34:15 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id 92EEC2E02B; Sat, 3 Jun 2006 12:34:13 +0200 (CEST) Message-ID: <44816592.9080900@locolomo.org> Date: Sat, 03 Jun 2006 12:33:54 +0200 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: Maan Jee References: <2cd0a0da0606030309y363dd8c6o9b5cd5d4b6366b46@mail.gmail.com> In-Reply-To: <2cd0a0da0606030309y363dd8c6o9b5cd5d4b6366b46@mail.gmail.com> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms070403010305030500080303" Cc: freebsd-questions@freebsd.org Subject: Re: Help: Novice - Hardware Advice! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 10:34:16 -0000 This is a cryptographically signed message in MIME format. --------------ms070403010305030500080303 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Maan Jee wrote: > Hello friends and fellows > > Today, I wanna have some hardware advice: > > I wanna build A super duper FreeBSD Web Server Box with apache2, mysql5, > php, etc. > > But I am just unsure about what kind of hardware I should buy since I am > not > having a big budget but do have a reasonable.... > > There gonna be many database queries load fetching data from mysql-server. > > What kind of Hardware I should buy? > > 1. Motherboad? > > 2. Processor? > > 3. RAM? > (What kind of and how much should be reasonable enough) > > 4. Storage System? > > I am looking for a solution with very reasonable cost and best efficiency > :o) How much traffic will you serve? This is also limited by the bandwidth you have - if you have an adsl connection usually downstream is higher than up stream, but serving pages go mostly upstream. How much work will the server do to generate pages? If everything is dynamic and you have a badly coded site it costs. You can get much efficiency with good code and/or apache proxy, or a squid proxy. I bought a mini-itx with 1Ghz Via chip and 256MB ram, 60GB IDE disk. Should I buy a new system today I would go for a fanless slower version. It serves just fine, not only web pages but also mail, database, ldap, dns, dhcp, imap as well as being firewall/router for the local network. It seems that most resources are consumed by the smtp server blocking spam. It's also reasonable cheap, around 400 euros, and consumes only around 30W. Cheers, Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms070403010305030500080303 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMzEwMzM1 NlowIwYJKoZIhvcNAQkEMRYEFEC7OZch+mXaP2nCGVj2V4/BwbrcMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQAkwdnHgsu66LwfHSpaQiiJeZYE44Fq Szkx5aVXgyZQIyCKJs8WDa4rG9whmrrr6fWV8kuSSBp6qyiuMiHHBOHuTGQTUo5WtgkNtZIH v9WrG24qn9702NjwRHWcaBIDooe5AUquniBgFJEntKUBZEz+SPBhbYCV+EjYh/HYyZjUp+e6 iSWHaOqHn8uS17x14mNRhdLNPPJdEKUdYoErNI0kfL0wDVmnJBCTaicopJG5wthBQlPxK8Uh NvPcZoc6EGff6fheELh5O/H5Asd4qWH8TfwjWujkLoYhlvf5IKSkMHAFbndBxILJtNbd7Or9 d4POQUYuEmxgSGMyaMhOqel/AAAAAAAA --------------ms070403010305030500080303-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 10:39:45 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DC23116A482 for ; Sat, 3 Jun 2006 10:39:45 +0000 (UTC) (envelope-from gil@asol.com.ph) Received: from mail.asol.com.ph (mx1.asol.com.ph [203.190.72.164]) by mx1.FreeBSD.org (Postfix) with SMTP id EEF7043D53 for ; Sat, 3 Jun 2006 10:39:43 +0000 (GMT) (envelope-from gil@asol.com.ph) Received: (qmail 56330 invoked by uid 1010); 3 Jun 2006 10:30:52 -0000 Received: from 203.175.2.13 by mail.asol.com.ph (envelope-from , uid 1008) with qmail-scanner-1.25-st-qms (clamdscan: 0.88/1356. spamassassin: 3.1.1. perlscan: 1.25-st-qms. Clear:RC:0(203.175.2.13):SA:0(-4.2/5.0):. Processed in 2.037599 secs); 03 Jun 2006 10:30:52 -0000 X-Spam-Status: No, hits=-4.2 required=5.0 X-Antivirus-ASPI-Mail-From: gil@asol.com.ph via mail.asol.com.ph X-Antivirus-ASPI: 1.25-st-qms (Clear:RC:0(203.175.2.13):SA:0(-4.2/5.0):. Processed in 2.037599 secs Process 56322) Received: from 13.2.175.203.asol.com.ph (HELO louigi) (gil@asol.com.ph@203.175.2.13) by mail.asol.com.ph with SMTP; 3 Jun 2006 10:30:50 -0000 Message-ID: <002c01c686fa$001770c0$0d02afcb@louigi> From: "GiL A. Virtucio" To: References: <20060603072410.GA4329@localhost> Date: Sat, 3 Jun 2006 18:39:32 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.3790.0 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0 Cc: Subject: Re: Can one user have more than one system mailboxes? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 10:39:46 -0000 i suck in administering sendmail... most of my admin friends use postfix but personally I use qmail :) ... it uses qmailadmin for webbased mailbox management and vqadmin for webbased email domain management. if you're interested, here is a nice installation/config guide.. http://freebsd.qmailrocks.org/install.htm ======================================= Gil A. Virtucio Janitor/Kolektor/Messenger/Driver Asia Solution Phillippines Inc. 28/F Antel Global Corporate Center 3 Doña Julia Vargas Avenue, Ortigas Center, Pasig Mobile # : +63-916-3989695 http://gihl.eu.org/ ======================================= ----- Original Message ----- From: To: Sent: Saturday, June 03, 2006 3:24 PM Subject: Can one user have more than one system mailboxes? > Can a user have more than one system mailbox? > > E. g., some ISP provides the next service: a client can make any number of > mailboxes for himself using web interface. > Almost all ISP are using UNIX. > So, how they do this? > Does that web interface create a new system user every time > I create a new mailbox? > > I have sendmail 8.13.6 on FreeBSD 6.1-RELEASE. > > Elisej Babenko > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 11:43:58 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2CE7F16A420 for ; Sat, 3 Jun 2006 11:43:58 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.224]) by mx1.FreeBSD.org (Postfix) with ESMTP id B61C843D45 for ; Sat, 3 Jun 2006 11:43:57 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wr-out-0506.google.com with SMTP id i20so688043wra for ; Sat, 03 Jun 2006 04:43:57 -0700 (PDT) Received: by 10.54.104.8 with SMTP id b8mr2951038wrc; Sat, 03 Jun 2006 04:43:57 -0700 (PDT) Received: from ?192.168.0.3? ( [216.45.217.148]) by mx.gmail.com with ESMTP id 26sm4337274wrl.2006.06.03.04.43.56; Sat, 03 Jun 2006 04:43:56 -0700 (PDT) Date: Sat, 03 Jun 2006 07:44:04 -0400 From: Gerard Seibert To: freebsd-questions@freebsd.org Organization: Seibercom In-Reply-To: <1149328618.704.13.camel@localhost.savola.com> References: <1149328618.704.13.camel@localhost.savola.com> X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxcR nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q Message-Id: <20060603073403.5447.GERARD@seibercom.net> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Mailer: Becky! ver. 2.25 [en] Subject: Re: portmanager keeps on reinstalling the same port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 11:43:58 -0000 Yousef Raffah wrote: > excuse the n00b in me but I'm trying to install a port using portmanager > as installing it the traditional (make install clean) way failed and the > one of the cool guys on the list here suggested to use portmanager to > resolve the problem. > > I have synced my ports as of today morning and tried to launch: > # portmanager deskutils/taskjuggler -l -f > > the thing is, portmanager kicks out and tries to reinstall lang/perl5.8, > although it had reinstalled it earlier and I'm sure I have perl 5.8.8 > installed already!. I'm not sure if this is a normal behaviour of > portmanager? But I will keep on monitoring it and see if it all goes > well > > You are telling 'portmanager' to rebuild your entire system when you use the '-f' switch. To install just this one port, run the program like this: portmanager deskutils/taskjuggler -l -y If you have 'portupgrade' installed, you might want to run 'portsclean': portsclean -C -L first to make sure that you have cleaned out any old work before starting a new installation. -- Gerard Seibert gerard@seibercom.net From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 13:07:38 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 57D3B16A475 for ; Sat, 3 Jun 2006 13:07:38 +0000 (UTC) (envelope-from yraffah@savola.com) Received: from heathrow.savoladns.com (heathrow.savoladns.com [212.12.174.7]) by mx1.FreeBSD.org (Postfix) with SMTP id 4657043D49 for ; Sat, 3 Jun 2006 13:07:36 +0000 (GMT) (envelope-from yraffah@savola.com) Received: from ocs.savola.com (ocs.savola.com [222.22.1.211]) by heathrow.savoladns.com (Postfix) with ESMTP id CC2C195849 for ; Sat, 3 Jun 2006 16:07:31 +0300 (AST) Received: from 222.22.1.191 by ocs.savola.com with ESMTP id 60910141149339348; Sat, 03 Jun 2006 15:55:48 +0300 From: Yousef Raffah To: freebsd-questions@freebsd.org In-Reply-To: <20060603073403.5447.GERARD@seibercom.net> References: <1149328618.704.13.camel@localhost.savola.com> <20060603073403.5447.GERARD@seibercom.net> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-Yl5ZvxbLni43kSTdvKmS" Organization: The Savola Group Date: Sat, 03 Jun 2006 16:07:25 +0300 Message-Id: <1149340045.704.17.camel@localhost.savola.com> Mime-Version: 1.0 X-Mailer: Evolution 2.6.1 FreeBSD GNOME Team Port Subject: Re: portmanager keeps on reinstalling the same port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: yraffah@savola.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 13:07:38 -0000 --=-Yl5ZvxbLni43kSTdvKmS Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sat, 2006-06-03 at 07:44 -0400, Gerard Seibert wrote: > Yousef Raffah wrote: >=20 > > excuse the n00b in me but I'm trying to install a port using portmanage= r > > as installing it the traditional (make install clean) way failed and th= e > > one of the cool guys on the list here suggested to use portmanager to > > resolve the problem. > >=20 > > I have synced my ports as of today morning and tried to launch: > > # portmanager deskutils/taskjuggler -l -f > >=20 > > the thing is, portmanager kicks out and tries to reinstall lang/perl5.8= , > > although it had reinstalled it earlier and I'm sure I have perl 5.8.8 > > installed already!. I'm not sure if this is a normal behaviour of > > portmanager? But I will keep on monitoring it and see if it all goes > > well > >=20 > >=20 > You are telling 'portmanager' to rebuild your entire system when you use > the '-f' switch. >=20 > To install just this one port, run the program like this: >=20 > portmanager deskutils/taskjuggler -l -y I did that and here is the latest output I got from portmanager: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D skipping taskjuggler-2.2.0 /deskutils/taskjuggler until dependency p5-Class-MethodMaker-2.08 updated skipping p5-Class-MethodMaker-2.08 /devel/p5-Class-MethodMaker until dependency p5-PathTools-3.18 updated skipping qt-3.3.6_2 /x11-toolkits/qt33 until dependency libmng-1.0.9 updated skipping kdelibs-3.5.2_1 /x11/kdelibs3 until dependency xorg-clients-6.9.0_3 updated skipping p5-Bit-Vector-6.4_1 /math/p5-Bit-Vector until dependency p5-Carp-Clan-5.3 updated skipping xorg-clients-6.9.0_3 /x11/xorg-clients until dependency imake-6.9.0 updated skipping openssl-0.9.8b_1 /security/openssl marked IGNORE reason: conflicts with another installed port skipping xorg-fonts-encodings-6.9.0_1 /x11-fonts/xorg-fonts-encodings until dependency xorg-clients-6.9.0_3 updated skipping OpenEXR-1.2.2_1 /graphics/OpenEXR until dependency pkg-config-0.20_2 updated skipping libart_lgpl-2.3.17_1 /graphics/libart_lgpl until dependency pkg-config-0.20_2 updated skipping arts-1.5.2,1 /audio/arts until dependency qt-3.3.6_2 updated skipping libidn-0.6.3 /dns/libidn until dependency pkg-config-0.20_2 updated skipping libxml2-2.6.24_1 /textproc/libxml2 until dependency pkg-config-0.20_2 updated skipping libxslt-1.1.16_2 /textproc/libxslt until dependency pkg-config-0.20_2 updated skipping cups-base-1.1.23.0_9 /print/cups-base until dependency gnutls-1.2.11 updated skipping gamin-0.1.7_2 /devel/gamin until dependency pkg-config-0.20_2 updated skipping fontconfig-2.3.2_5,1 /x11-fonts/fontconfig until dependency pkg-config-0.20_2 updated skipping freetype2-2.1.10_3 /print/freetype2 until dependency pkg-config-0.20_2 updated skipping libaudiofile-0.2.6 /audio/libaudiofile until dependency pkg-config-0.20_2 updated skipping libmad-0.15.1b_2 /audio/libmad until dependency pkg-config-0.20_2 updated skipping glib-2.10.2 /devel/glib20 until dependency pkg-config-0.20_2 updated skipping jackit-0.100.0_2 /audio/jack until dependency pkg-config-0.20_2 updated skipping gnutls-1.2.11 /security/gnutls until dependency pkg-config-0.20_2 updated skipping libsndfile-1.0.16 /audio/libsndfile until dependency pkg-config-0.20_2 updated skipping libtasn1-0.3.4 /security/libtasn1 until dependency pkg-config-0.20_2 updated skipping p5-PostScript-Simple-0.07 /print/p5-PostScript-Simple marked IGNORE reason: looping, 3rd attempt at make skipping p5-PathTools-3.18 /devel/p5-PathTools marked IGNORE reason: looping, 3rd attempt at make skipping libmng-1.0.9 /graphics/libmng marked IGNORE reason: looping, 3rd attempt at make skipping mDNSResponder-107.5 /net/mDNSResponder marked IGNORE reason: looping, 3rd attempt at make skipping lua-5.0.2_1 /lang/lua50 marked IGNORE reason: looping, 3rd attempt at make skipping p5-Carp-Clan-5.3 /devel/p5-Carp-Clan marked IGNORE reason: looping, 3rd attempt at make skipping imake-6.9.0 /devel/imake-6 marked IGNORE reason: looping, 3rd attempt at make skipping pkg-config-0.20_2 /devel/pkg-config marked IGNORE reason: looping, 3rd attempt at make skipping portaudio-18.1_2 /audio/portaudio marked IGNORE reason: looping, 3rd attempt at make Should I update the dependencies manually? Isn't portmanager supposed to "update" those dependencies? >=20 > If you have 'portupgrade' installed, you might want to run 'portsclean': >=20 > portsclean -C -L >=20 > first to make sure that you have cleaned out any old work before > starting a new installation. >=20 I did that and it cleaned some stuff :) Thanks for sharing the information. >=20 -- Sincerely, Yousef Raffah Senior Systems Administrator -- Aren't you using Firefox? Get it at http://www.getfirefox.com --=-Yl5ZvxbLni43kSTdvKmS Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (FreeBSD) iD8DBQBEgYmNH9IXMb4e6CMRAiiHAJ4wQGCQ1NeSVsH1Rfss06j82T/4ggCfT7nL DeJTt920ZYS9cIi0/2zN4CM= =fW0f -----END PGP SIGNATURE----- --=-Yl5ZvxbLni43kSTdvKmS-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 15:39:06 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 147E816A46F for ; Sat, 3 Jun 2006 15:39:06 +0000 (UTC) (envelope-from sgk@troutmask.apl.washington.edu) Received: from troutmask.apl.washington.edu (troutmask.apl.washington.edu [128.208.78.105]) by mx1.FreeBSD.org (Postfix) with ESMTP id AF29E43D49 for ; Sat, 3 Jun 2006 15:39:05 +0000 (GMT) (envelope-from sgk@troutmask.apl.washington.edu) Received: from troutmask.apl.washington.edu (localhost.apl.washington.edu [127.0.0.1]) by troutmask.apl.washington.edu (8.13.6/8.13.6) with ESMTP id k53Fclf5036297 for ; Sat, 3 Jun 2006 08:38:47 -0700 (PDT) (envelope-from sgk@troutmask.apl.washington.edu) Received: (from sgk@localhost) by troutmask.apl.washington.edu (8.13.6/8.13.6/Submit) id k53FclVj036296 for freebsd-questions@freebsd.org; Sat, 3 Jun 2006 08:38:47 -0700 (PDT) (envelope-from sgk) Date: Sat, 3 Jun 2006 08:38:47 -0700 From: Steve Kargl To: freebsd-questions@freebsd.org Message-ID: <20060603153847.GA36267@troutmask.apl.washington.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.1i Subject: Tuning GigE network for cluster computing? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 15:39:06 -0000 First, I'm running FreeBSD 6.1-stable on a small cluster with 6 nodes that contain Tyan motheriboards. These broads have Broadcom GigE NICs that use the bge device. The cluster will be using MPI to possibly shove large data sets through a GigE switch, so I'm trying to determine how best to optimize the transfer. Would DEVICE_POLLING and/or jumbo frames likely methods for enhanced speeds? -- Steve From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:09:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4293A16A477 for ; Sat, 3 Jun 2006 16:09:28 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33303.mail.mud.yahoo.com (web33303.mail.mud.yahoo.com [68.142.206.118]) by mx1.FreeBSD.org (Postfix) with SMTP id D3E1343D45 for ; Sat, 3 Jun 2006 16:09:27 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 11634 invoked by uid 60001); 3 Jun 2006 16:09:27 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=iUeu0EHSvN/Faa0LUeISdZhWkx3l4HtQZQAexoG7LnG3JKrQk/3CG53ZbY3ZUCLmrPEg9JpOXWbrhWJHwh3C7Q2m8l9PijtJNd6JmzG2pNh25qfcWx/Z74IZR6P6kn+ExajanCW1U4ebcyBCqRyXh3V/8eZN3fBPfnbwLBUctT0= ; Message-ID: <20060603160927.11632.qmail@web33303.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33303.mail.mud.yahoo.com via HTTP; Sat, 03 Jun 2006 09:09:27 PDT Date: Sat, 3 Jun 2006 09:09:27 -0700 (PDT) From: Danial Thom To: Mark , 'FreeBSD-Questions Questions' In-Reply-To: <200606021859.k52Ix4gr067426@asarian-host.net> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:09:28 -0000 --- Mark wrote: > > > -----Original Message----- > > From: owner-freebsd-questions@freebsd.org > > [mailto:owner-freebsd-questions@freebsd.org] > On Behalf Of Danial Thom > > Sent: vrijdag 2 juni 2006 18:28 > > To: Scott Hiemstra; 'FreeBSD-Questions > Questions' > > Subject: RE: Does FreeBSD 4.11-STABLE support > the 8237R? > > > > --- Scott Hiemstra wrote: > > > > > > Did you say you are running a server? > That MB is only suitable for > > > > desktop use, as it has the slowest > ethernet controller known to man > > > > on a 32/33Mhz bus. Running this MB as a > server is like putting > > > > cheap, skinny tires on your porsche. > > > > > > > > DT > > > > > > Personaly, I appreciate your dedication to > maximum performance but > > > please notice this thread is in reference > to swapping a MB for another > > > MB and coments like yours are not > appreciated. > > > > > > Would you prefer if I had stated? > > > > > > "I have the same board in a crappy server > running 4.11 (FreeBSD > > > 4.11-STABLE #0) and no problems to report." > > > > > > Please notice I never said what the box was > doing nor did I ask for > > > your opinion of what MB/NIC I use in my > systems. This SERVER is pur- > > > pose built and runs stable 24/7 as a low > volume outbound mail server > > > so the performance of the NIC is not my > primary concern. Please keep > > > your useless comments to yourself as they > do nothing but waste disk > > > space, CPU time and the valuable time of > people who attempt to help > > > others on this list. > > > > > > Scott > > > > So if someone is planning on using a crappy > motherboard as a server its > > not appropriate to mention that the > replacement is not suitable for the > > task? So since you're replacing the MB, why > not take the opportunity to > > use something suitable. > > Because it means introducing a whole slew of > new, unknown variables. :) > > When I first installed 4.10R, it did not even > support the 8237; and disk > performance on that board was limited to a > terribly slow Multi-World DMA 2 > mode (I think it was that; very slow, at > least). So, imagine my delight > when 4.11-STABLE supported the 8237 at last. > Buying a newer type > motherboard for 4.11-STABLE (where would you > find one for socket 754, so > soon replaced by socket 939, anyway?) would > likely mean an unsupported > south-bridge chip, and being back to square > one. Nope. I'm gonna stick > with what works for 4.11-STABLE (as that is > still my preferred FreeBSD > version; and if I cannot find a new motherboard > after the new one dies, I > will just continue to run the whole thing in a > Vmware box). > > As for the LAN, since I only have a 100 Mb > network, I see no reason to > assume even a less than ideal performing > gigabit LAN would slow things > down (unless its performance dropped below 10%; > and I'm sure it's not that > bad). > > In fact, not to be unnecessarily contrary, but > I would ere say this > motherboard is totally unsuited for desktop use > (I have a shiny P5WD2 > Premium for that), and that this board is > rather ideally suited for a > FreeBSD 4.11 system. Well that's just stupid, but you're entitled to waste your money in any way you choose. We run FreeBSD 4.9 and I've never had a problem with hardware. Of course I know how to choose hardware and you don't :) I never said "desktop". The MB isn't really suitable for anything that uses a LAN extensively. Knowing ASUS (whose MBs I'd never use, btw), I'd guess that the ethernet controller on the P4WD2 is connected to a 1x PCIe which would be a joke. What you don't "get": - The slower the bus, the more CPU cycles it takes to do an I/O. Typically you are doing 1000s and 1000s of I/Os per second. Thats 100s of 1000s of cpu cycles wasted per second. - inefficient controller = more CPU cyles per access. Maybe MANY more. This translates to degradation of your CPU. The more traffic, the more degradation. Whether you're on a gig network or a 100Mb/s network, the efficiency of the controller will still eat up your cpu. Of course if you're just doing IM or email, then you don't get enough iterations per second to make a difference. But on a server,or gaming machine or anything on a broadband connection, you're just killing your cpu using a crappy controller. You'd be better off putting up an old 845 chipset MB with an fxp controller running a 2.6Ghz celeron than what you're running, for a lot less money. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:20:11 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F84E16A41F for ; Sat, 3 Jun 2006 16:20:11 +0000 (UTC) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: from mail6.sea5.speakeasy.net (mail6.sea5.speakeasy.net [69.17.117.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id AA7F243D46 for ; Sat, 3 Jun 2006 16:20:10 +0000 (GMT) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: (qmail 29394 invoked from network); 3 Jun 2006 16:20:09 -0000 Received: from dsl092-078-145.bos1.dsl.speakeasy.net (HELO be-well.ilk.org) ([66.92.78.145]) (envelope-sender ) by mail6.sea5.speakeasy.net (qmail-ldap-1.03) with SMTP for ; 3 Jun 2006 16:20:09 -0000 Received: by be-well.ilk.org (Postfix, from userid 1147) id C204D28449; Sat, 3 Jun 2006 12:20:07 -0400 (EDT) To: hernan References: <9b9d376a0606020944j1d6ff4farf553983fe4d421f8@mail.gmail.com> From: Lowell Gilbert Date: Sat, 03 Jun 2006 12:20:07 -0400 In-Reply-To: <9b9d376a0606020944j1d6ff4farf553983fe4d421f8@mail.gmail.com> (hernan's message of "Fri, 2 Jun 2006 09:44:12 -0700") Message-ID: <44u072rz2g.fsf@be-well.ilk.org> User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (berkeley-unix) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: freebsd-questions@freebsd.org Subject: Re: [freebsd-questions] emacs && xemacs? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:20:11 -0000 hernan writes: > I have the xemacs port installed and I would also like to have the > normal emacs port installed. When I try to 'make clean install' > /usr/ports/editors/emacs it builds fine but fails to install because > of xemacs, I'm at work now but the error was something to the effect > that they both conflict and install files into the same place. > > I'm running FreeBSD 6.0 RELEASE, with a recent portupgrade so things > are fairly up to date. I'm trying to install emacs 21.3_9 and have > xemacs 21.4.19 installed already. You will need to install it to a different PREFIX. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:28:43 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7F36E16A478 for ; Sat, 3 Jun 2006 16:28:43 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33307.mail.mud.yahoo.com (web33307.mail.mud.yahoo.com [68.142.206.122]) by mx1.FreeBSD.org (Postfix) with SMTP id A6CB843D45 for ; Sat, 3 Jun 2006 16:28:42 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 24829 invoked by uid 60001); 3 Jun 2006 16:28:42 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=HQ4pQH9vpqerX5MT6n6WJiqtSVsETKpEtAGo2oGp3mCyVS8Y5XVgAoQ/dTOytnJcsBHSxGu5+/JHvjaoCUUROjoLK02/q1YJv0Fzchwi3K2F3aPjmfXKj6iTQXtAjAldhoCVd4Tr2VW5dKnZJU6ff5Xb8U+WkdCwtIWi1oCyov0= ; Message-ID: <20060603162842.24827.qmail@web33307.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33307.mail.mud.yahoo.com via HTTP; Sat, 03 Jun 2006 09:28:42 PDT Date: Sat, 3 Jun 2006 09:28:42 -0700 (PDT) From: Danial Thom To: Steve Kargl , freebsd-questions@freebsd.org In-Reply-To: <20060603153847.GA36267@troutmask.apl.washington.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: Re: Tuning GigE network for cluster computing? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:28:44 -0000 --- Steve Kargl wrote: > First, I'm running FreeBSD 6.1-stable on a > small cluster > with 6 nodes that contain Tyan motheriboards. > These broads > have Broadcom GigE NICs that use the bge > device. > > The cluster will be using MPI to possibly shove > large data > sets through a GigE switch, so I'm trying to > determine how > best to optimize the transfer. > > Would DEVICE_POLLING and/or jumbo frames likely > methods for > enhanced speeds? > > -- > Steve --- Steve Kargl wrote: > First, I'm running FreeBSD 6.1-stable on a > small cluster > with 6 nodes that contain Tyan motheriboards. > These broads > have Broadcom GigE NICs that use the bge > device. > > The cluster will be using MPI to possibly shove > large data > sets through a GigE switch, so I'm trying to > determine how > best to optimize the transfer. > > Would DEVICE_POLLING and/or jumbo frames likely > methods for > enhanced speeds? Firstly we've been discussing how bad and inefficient the broadcom controllers are. If you have a tyan MB with onboard controllers they are incredibly slow (ie inefficient), as well as being quirky. If you have a PCI-X slot put in an intel card. They have built-in interrupt moderation so you don't have dick around with polling. A 133Mhz intel controller (make sure they have the GB chips on them and not the EB) will use half the cpu of the on-board broadcoms. If you don't believe try it with one box and measure the cpu usage before and after. Its worth the $50. investment in the card, believe me. While polling may marginally decrease the cpu load (depending on how bad FreeBSD 6.1 is on interrupt overhead), its also going to add latency to the processing of packets, which is the opposite of what you want to do. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:51:41 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5626A16A476 for ; Sat, 3 Jun 2006 16:51:41 +0000 (UTC) (envelope-from don.hinton@vanderbilt.edu) Received: from mailgate04.smtp.vanderbilt.edu (mailgate04.smtp.Vanderbilt.Edu [129.59.1.75]) by mx1.FreeBSD.org (Postfix) with ESMTP id C4E9143D46 for ; Sat, 3 Jun 2006 16:51:40 +0000 (GMT) (envelope-from don.hinton@vanderbilt.edu) Received: from smtp09.smtp.vanderbilt.edu (smtp09.smtp.Vanderbilt.Edu [129.59.1.239]) by mailgate04.smtp.vanderbilt.edu (8.13.6/8.13.6) with ESMTP id k53GpaSJ017574 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Sat, 3 Jun 2006 11:51:36 -0500 Received: from smtp09.smtp.vanderbilt.edu (localhost [127.0.0.1]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9C+d3.7.9) with ESMTP id k53GpaME013711; Sat, 3 Jun 2006 11:51:36 -0500 (CDT) Received: from [192.168.1.120] (c-69-180-220-12.hsd1.tn.comcast.net [69.180.220.12]) by smtp09.smtp.vanderbilt.edu (8.12.11/8.12.11/VU-3.7.9.3B+d3.7.9) with ESMTP id k53GpZ5Q013708 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 3 Jun 2006 11:51:35 -0500 (CDT) From: Don Hinton Organization: ISIS To: freebsd-questions@freebsd.org Date: Sat, 3 Jun 2006 11:51:32 -0500 User-Agent: KMail/1.9.1 References: <9b9d376a0606020944j1d6ff4farf553983fe4d421f8@mail.gmail.com> <44u072rz2g.fsf@be-well.ilk.org> In-Reply-To: <44u072rz2g.fsf@be-well.ilk.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606031151.33423.don.hinton@vanderbilt.edu> X-Proofpoint-Virus-Version: vendor=fsecure engine=4.64.4171:2.3.9, 1.2.33, 4.0.164 definitions=2006-06-02_02:2006-06-02, 2006-06-01, 2006-06-02 signatures=0 X-PPS: No, score=0 Cc: hernan , Lowell Gilbert Subject: Re: [freebsd-questions] emacs && xemacs? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:51:42 -0000 On Saturday 03 June 2006 11:20, Lowell Gilbert wrote: > hernan writes: > > I have the xemacs port installed and I would also like to have the > > normal emacs port installed. When I try to 'make clean install' > > /usr/ports/editors/emacs it builds fine but fails to install because > > of xemacs, I'm at work now but the error was something to the effect > > that they both conflict and install files into the same place. > > > > I'm running FreeBSD 6.0 RELEASE, with a recent portupgrade so things > > are fairly up to date. I'm trying to install emacs 21.3_9 and have > > xemacs 21.4.19 installed already. > > You will need to install it to a different PREFIX. You'll probably need to define DISABLE_CONFLICTS as well. hth... don > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" -- Don Hinton tel: 615.480.5667 ISIS, Vanderbilt University skype: donhinton http://people.vanderbilt.edu/~don.hinton/ From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:55:19 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7E24F16A4DE for ; Sat, 3 Jun 2006 16:55:19 +0000 (UTC) (envelope-from gerard@seibercom.net) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.238]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2462B43D46 for ; Sat, 3 Jun 2006 16:55:17 +0000 (GMT) (envelope-from gerard@seibercom.net) Received: by wr-out-0506.google.com with SMTP id i20so721811wra for ; Sat, 03 Jun 2006 09:55:17 -0700 (PDT) Received: by 10.54.116.7 with SMTP id o7mr3041592wrc; Sat, 03 Jun 2006 09:54:05 -0700 (PDT) Received: from ?192.168.0.3? ( [216.45.217.148]) by mx.gmail.com with ESMTP id 8sm2792899wra.2006.06.03.09.55.15; Sat, 03 Jun 2006 09:55:16 -0700 (PDT) Date: Sat, 03 Jun 2006 12:55:25 -0400 From: Gerard Seibert To: freebsd-questions@freebsd.org Organization: Seibercom In-Reply-To: <1149340045.704.17.camel@localhost.savola.com> References: <20060603073403.5447.GERARD@seibercom.net> <1149340045.704.17.camel@localhost.savola.com> X-Face: "\j?x](l|]4p?-1Bf@!wN<&p=$.}^k-HgL}cJKbQZ3r#Ar]\%U(#6}'?<3s7%(%(gxJxxcR nSNPNr*/^~StawWU9KDJ-CT0k$f#@t2^K&BS_f|?ZV/.7Q Message-Id: <20060603122342.DEF4.GERARD@seibercom.net> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit X-Mailer: Becky! ver. 2.25 [en] Subject: Re: portmanager keeps on reinstalling the same port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:55:19 -0000 Yousef Raffah wrote: > On Sat, 2006-06-03 at 07:44 -0400, Gerard Seibert wrote: > > Yousef Raffah wrote: > > > > > excuse the n00b in me but I'm trying to install a port using portmanager > > > as installing it the traditional (make install clean) way failed and the > > > one of the cool guys on the list here suggested to use portmanager to > > > resolve the problem. > > > > > > I have synced my ports as of today morning and tried to launch: > > > # portmanager deskutils/taskjuggler -l -f > > > > > > the thing is, portmanager kicks out and tries to reinstall lang/perl5.8, > > > although it had reinstalled it earlier and I'm sure I have perl 5.8.8 > > > installed already!. I'm not sure if this is a normal behaviour of > > > portmanager? But I will keep on monitoring it and see if it all goes > > > well > > > > > > > > You are telling 'portmanager' to rebuild your entire system when you use > > the '-f' switch. > > > > To install just this one port, run the program like this: > > > > portmanager deskutils/taskjuggler -l -y > I did that and here is the latest output I got from portmanager: > > ======================================================================== > skipping taskjuggler-2.2.0 /deskutils/taskjuggler until dependency > p5-Class-MethodMaker-2.08 updated > skipping p5-Class-MethodMaker-2.08 /devel/p5-Class-MethodMaker until > dependency p5-PathTools-3.18 updated > skipping qt-3.3.6_2 /x11-toolkits/qt33 until dependency libmng-1.0.9 > updated > skipping kdelibs-3.5.2_1 /x11/kdelibs3 until dependency > xorg-clients-6.9.0_3 updated > skipping p5-Bit-Vector-6.4_1 /math/p5-Bit-Vector until dependency > p5-Carp-Clan-5.3 updated > skipping xorg-clients-6.9.0_3 /x11/xorg-clients until dependency > imake-6.9.0 updated > skipping openssl-0.9.8b_1 /security/openssl marked IGNORE reason: > conflicts with another installed port > skipping xorg-fonts-encodings-6.9.0_1 /x11-fonts/xorg-fonts-encodings > until dependency xorg-clients-6.9.0_3 updated > skipping OpenEXR-1.2.2_1 /graphics/OpenEXR until dependency > pkg-config-0.20_2 updated > skipping libart_lgpl-2.3.17_1 /graphics/libart_lgpl until dependency > pkg-config-0.20_2 updated > skipping arts-1.5.2,1 /audio/arts until dependency qt-3.3.6_2 updated > skipping libidn-0.6.3 /dns/libidn until dependency pkg-config-0.20_2 > updated > skipping libxml2-2.6.24_1 /textproc/libxml2 until dependency > pkg-config-0.20_2 updated > skipping libxslt-1.1.16_2 /textproc/libxslt until dependency > pkg-config-0.20_2 updated > skipping cups-base-1.1.23.0_9 /print/cups-base until dependency > gnutls-1.2.11 updated > skipping gamin-0.1.7_2 /devel/gamin until dependency pkg-config-0.20_2 > updated > skipping fontconfig-2.3.2_5,1 /x11-fonts/fontconfig until dependency > pkg-config-0.20_2 updated > skipping freetype2-2.1.10_3 /print/freetype2 until dependency > pkg-config-0.20_2 updated > skipping libaudiofile-0.2.6 /audio/libaudiofile until dependency > pkg-config-0.20_2 updated > skipping libmad-0.15.1b_2 /audio/libmad until dependency > pkg-config-0.20_2 updated > skipping glib-2.10.2 /devel/glib20 until dependency pkg-config-0.20_2 > updated > skipping jackit-0.100.0_2 /audio/jack until dependency pkg-config-0.20_2 > updated > skipping gnutls-1.2.11 /security/gnutls until dependency > pkg-config-0.20_2 updated > skipping libsndfile-1.0.16 /audio/libsndfile until dependency > pkg-config-0.20_2 updated > skipping libtasn1-0.3.4 /security/libtasn1 until dependency > pkg-config-0.20_2 updated > skipping p5-PostScript-Simple-0.07 /print/p5-PostScript-Simple marked > IGNORE reason: looping, 3rd attempt at make > skipping p5-PathTools-3.18 /devel/p5-PathTools marked IGNORE reason: > looping, 3rd attempt at make > skipping libmng-1.0.9 /graphics/libmng marked IGNORE reason: looping, > 3rd attempt at make > skipping mDNSResponder-107.5 /net/mDNSResponder marked IGNORE reason: > looping, 3rd attempt at make > skipping lua-5.0.2_1 /lang/lua50 marked IGNORE reason: looping, 3rd > attempt at make > skipping p5-Carp-Clan-5.3 /devel/p5-Carp-Clan marked IGNORE reason: > looping, 3rd attempt at make > skipping imake-6.9.0 /devel/imake-6 marked IGNORE reason: looping, 3rd > attempt at make > skipping pkg-config-0.20_2 /devel/pkg-config marked IGNORE reason: > looping, 3rd attempt at make > skipping portaudio-18.1_2 /audio/portaudio marked IGNORE reason: > looping, 3rd attempt at make > > > Should I update the dependencies manually? Isn't portmanager supposed to > "update" those dependencies? > > > > If you have 'portupgrade' installed, you might want to run 'portsclean': > > > > portsclean -C -L > > > > first to make sure that you have cleaned out any old work before > > starting a new installation. > > > I did that and it cleaned some stuff :) Thanks for sharing the > information. > > Well, it seems that you have a problem here: skipping openssl-0.9.8b_1 /security/openssl marked IGNORE reason: conflicts with another installed port You might want to check that out. Are you sure you have a completely fresh ports tree? If not, update it and then run" portmanager -u -l -y and see if that corrects the other problems. Then try to install the package. Did portmanager actually exit or did you stop it manually? There is no mention in the log file you supplied of it exiting the build process. -- Gerard Seibert gerard@seibercom.net From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:57:01 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C13ED16A4D6 for ; Sat, 3 Jun 2006 16:57:01 +0000 (UTC) (envelope-from aaronvan@comcast.net) Received: from sccrmhc11.comcast.net (sccrmhc11.comcast.net [204.127.200.81]) by mx1.FreeBSD.org (Postfix) with ESMTP id 20D6E43D49 for ; Sat, 3 Jun 2006 16:57:00 +0000 (GMT) (envelope-from aaronvan@comcast.net) Received: from [192.168.1.100] (c-67-180-170-102.hsd1.ca.comcast.net[67.180.170.102]) by comcast.net (sccrmhc11) with SMTP id <2006060316565901100frefhe>; Sat, 3 Jun 2006 16:56:59 +0000 User-Agent: Microsoft-Entourage/11.2.3.060209 Date: Sat, 03 Jun 2006 09:53:01 -0700 From: Aaron VanAlstine To: Message-ID: Thread-Topic: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? Thread-Index: AcaHLixparvBoPMhEdq4tQAFAmHJOg== In-Reply-To: <200605292156.35845.ogautherot@vtr.net> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Cc: "freebsd-questions@freebsd.org" Subject: Re: Does Marvell 88E8053 PCIe Gigabit LAN controller work with 6.0? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:57:01 -0000 My mobo has a Marvell 88E8053 LAN controller. It wasn't even detected until I downloaded the FreeBSD 6.0 driver. Once I installed the driver, DCHP worked like a dream and I was right on-line. However, when I installed, 6.1, I lost connectivity again. Does anybody know if Marvell's 6.0 driver is incompatible with 6.1? -- Aaron On 5/29/06 18:56, "Olivier Gautherot" wrote: > Hi Aaron! > >> Thanks, I changed the RAID configuration to RAID1 and reloaded the OS and >> for some reason it is now booting up properly. Now if I could only connect >> to the Net! ;) Oh well, the road to discovery has many detours... > > Welcome to the club! ;-) I had this issue once too. What network chipset do > you have (seems to be on-board, isn't it?) I ended up replacing an old card > that I was using happily with Windows, Linux and BeOS because it was not > compatible with FreeBSD. Is yours at least detected? > > By the way, RAID1 is a good choice - better than RAID0 anyway. > > Have fun ;-) > Cheers From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 16:58:36 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7178F16A537 for ; Sat, 3 Jun 2006 16:58:36 +0000 (UTC) (envelope-from sgk@troutmask.apl.washington.edu) Received: from troutmask.apl.washington.edu (troutmask.apl.washington.edu [128.208.78.105]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9AC5843D60 for ; Sat, 3 Jun 2006 16:58:25 +0000 (GMT) (envelope-from sgk@troutmask.apl.washington.edu) Received: from troutmask.apl.washington.edu (localhost.apl.washington.edu [127.0.0.1]) by troutmask.apl.washington.edu (8.13.6/8.13.6) with ESMTP id k53Gw6Zw036740; Sat, 3 Jun 2006 09:58:06 -0700 (PDT) (envelope-from sgk@troutmask.apl.washington.edu) Received: (from sgk@localhost) by troutmask.apl.washington.edu (8.13.6/8.13.6/Submit) id k53Gw66t036739; Sat, 3 Jun 2006 09:58:06 -0700 (PDT) (envelope-from sgk) Date: Sat, 3 Jun 2006 09:58:06 -0700 From: Steve Kargl To: Danial Thom Message-ID: <20060603165806.GA36639@troutmask.apl.washington.edu> References: <20060603153847.GA36267@troutmask.apl.washington.edu> <20060603162842.24827.qmail@web33307.mail.mud.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060603162842.24827.qmail@web33307.mail.mud.yahoo.com> User-Agent: Mutt/1.4.2.1i Cc: freebsd-questions@freebsd.org Subject: Re: Tuning GigE network for cluster computing? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 16:58:37 -0000 On Sat, Jun 03, 2006 at 09:28:42AM -0700, Danial Thom wrote: > > wrote: > > > First, I'm running FreeBSD 6.1-stable on a > > small cluster > > with 6 nodes that contain Tyan motheriboards. > > These broads > > have Broadcom GigE NICs that use the bge > > device. > > > > The cluster will be using MPI to possibly shove > > large data > > sets through a GigE switch, so I'm trying to > > determine how > > best to optimize the transfer. > > > > Would DEVICE_POLLING and/or jumbo frames likely > > methods for > > enhanced speeds? > > > Firstly we've been discussing how bad and > inefficient the broadcom controllers are. If you > have a tyan MB with onboard controllers they are > incredibly slow (ie inefficient), as well as > being quirky. If you have a PCI-X slot put in an > intel card. They have built-in interrupt > moderation so you don't have dick around with > polling. A 133Mhz intel controller (make sure > they have the GB chips on them and not the EB) > will use half the cpu of the on-board broadcoms. > If you don't believe try it with one box and > measure the cpu usage before and after. Its worth > the $50. investment in the card, believe me. I'll look into the Intel cards, but unfortunately I'm probably stuck with the onboard broadcom devices for the immediate future. There is one expansion slot (whether its PCI-X, I don't know). I was actually planning to use the slot for infiniband, myrinet, or the 10 GiGE cards that Drew Gallatin has mentioned. > While polling may marginally decrease the cpu > load (depending on how bad FreeBSD 6.1 is on > interrupt overhead), its also going to add > latency to the processing of packets, which is > the opposite of what you want to do. This is the conclusion that I reached in reading i386/conf/NOTES. Thanks for confirming my suspicions. -- Steve From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 17:00:28 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3CE1616A59F for ; Sat, 3 Jun 2006 17:00:28 +0000 (UTC) (envelope-from maxsec@gmail.com) Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.237]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9047443D90 for ; Sat, 3 Jun 2006 17:00:18 +0000 (GMT) (envelope-from maxsec@gmail.com) Received: by wr-out-0506.google.com with SMTP id i20so722456wra for ; Sat, 03 Jun 2006 10:00:17 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=WOo4LZyI9rBmkaWYcPoZWCXNTOaTXdjfhTsNDNWZQpY/aSzFRUu9culKZ5v/zQBHYQGPyvOUd38gRDFX5gBj4q/+ndjchNheZ2pYDG+ywE8nRVoZfNlrUC9doZaucW2UOMfQ7w9zgLWhSV37r6eWcEbqTuqf3hxQqmjD9DQTXQ4= Received: by 10.54.93.11 with SMTP id q11mr3187267wrb; Sat, 03 Jun 2006 10:00:17 -0700 (PDT) Received: by 10.54.97.12 with HTTP; Sat, 3 Jun 2006 10:00:17 -0700 (PDT) Message-ID: <72cf361e0606031000h2dcf24d0ne101af55025cf57d@mail.gmail.com> Date: Sat, 3 Jun 2006 18:00:17 +0100 From: "Martin Hepworth" To: "Robert Davison" In-Reply-To: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> MIME-Version: 1.0 References: <20060528203746.85395.qmail@web25007.mail.ukl.yahoo.com> Content-Type: text/plain; charset=WINDOWS-1252; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: MailScanner Issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 17:00:28 -0000 Robert ASk on the mailScanner email list. there are people there who run sendmail = & FreeBSd & MailScanner and will be able to tell you the rc.conf settings. -- martin On 5/28/06, Robert Davison wrote: > > I've done a bit more digging. It seems that my sendmail_in.pid and > sendmail_out.pid files are not running in /var/run, despite having this i= n > my rc.conf.. > > sendmail_enable=3D"NONE" > clamd_enable=3D"YES" > freshd_enable=3D"YES" > mailscanner_enable=3D"YES" > mta_enable=3D"YES" > mta_type=3D"sendmail" > mta_profiles=3D"incoming outgoing submitqueue" > mta_incoming_flags=3D"-L sm-mta-in -bd -OPrivacyOptions=3Dnoetrn > -OQueueDirectory=3D/v > ar/spool/mqueue.in -ODeliveryMode=3Dqueueonly" > mta_incoming_pidfile=3D"/var/run/sendmail_in.pid" > mta_incoming_configfile=3D"/etc/mail/sendmail.cf" > mta_outgoing_flags=3D"-L sm-mta-out -q15m" > mta_outgoing_pidfile=3D"/var/run/sendmail_out.pid" > mta_outgoing_configfile=3D"/etc/mail/sendmail.cf" > mta_submitqueue_flags=3D"-L ms-msp-queue -Ac -q15m" > mta_submitqueue_pidfile=3D"/var/spool/clientmqueue/sm-client.pid" > mta_submitqueue_configfile=3D"/etc/mail/submit.cf" > > I'm getting a sendmail.pid file, but nothing more > > > --------------------------------- > Try the all-new Yahoo! Mail . "The New Version is radically easier to use= " > =96 The Wall Street Journal > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 17:12:37 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C46E616A473 for ; Sat, 3 Jun 2006 17:12:37 +0000 (UTC) (envelope-from jhorne@dfwlp.com) Received: from zeus.int.dfwlp.com (zeus.dfwlp.com [208.11.134.127]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7339343D46 for ; Sat, 3 Jun 2006 17:12:37 +0000 (GMT) (envelope-from jhorne@dfwlp.com) Received: from ind-cwhite.publicis-usa.com ([167.246.36.14]) (authenticated bits=0) by zeus.int.dfwlp.com (8.13.6/8.13.6) with ESMTP id k53HCXYb035214 for ; Sat, 3 Jun 2006 12:12:33 -0500 (CDT) (envelope-from jhorne@dfwlp.com) From: Jonathan Horne To: freebsd-questions@freebsd.org Date: Sat, 3 Jun 2006 12:12:11 -0500 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606031212.11908.jhorne@dfwlp.com> X-Spam-Status: No, score=-1.4 required=5.0 tests=ALL_TRUSTED autolearn=failed version=3.1.1 X-Spam-Checker-Version: SpamAssassin 3.1.1 (2006-03-10) on zeus.int.dfwlp.com Subject: how to avoid recompiling applications? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 17:12:43 -0000 i have a system that i tend to tear up quite often. sometimes accidently, sometimes not. recompiling kde is quite a long process (and when i try to do it from packages, something is always messed up). so, i was under the impression that if you *did not* make install clean (thus, only using 'make clean') and save your work directories, then when it came time to reinstall something, you would not have to go thru the compile process, and skip straight to the installation? example is, last night i compiled xorg from ports, but then tried to (against my better judgement) pull down kde from packages. utter catastrophe, after removing the non-working kde-package, kde3 port would not even compile after that. anyway, long story short, i backed up my /usr/ports, /usr/src, /usr/obj, and reinstalled. using my restored backup files, reapplying my old kernel and installworld went just without issue, i skipped the buildworld and buildkernel just fine, no hitches. but when i went to reinstall the xorg from last night (all the work directories were still there), 'make install' returned no output, and nothing happened. what gives? i ended up having to do a make clean on my ports dir before i could continue. in the future for me, is there a way to proeperly retain all the precompiled stuff, and just skip right to the installation portion of my previously compiled ports? thanks, jonathan From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 18:09:03 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2822B16A474 for ; Sat, 3 Jun 2006 18:09:03 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5462B43D48 for ; Sat, 3 Jun 2006 18:08:58 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id 58D082E024; Sat, 3 Jun 2006 20:08:57 +0200 (CEST) Message-ID: <4481D02B.8050907@locolomo.org> Date: Sat, 03 Jun 2006 20:08:43 +0200 From: =?UTF-8?B?RXJpayBOw7hyZ2FhcmQ=?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: "GiL A. Virtucio" References: <20060603072410.GA4329@localhost> <002c01c686fa$001770c0$0d02afcb@louigi> In-Reply-To: <002c01c686fa$001770c0$0d02afcb@louigi> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms080202030102060806030302" Cc: questions@freebsd.org Subject: Re: Can one user have more than one system mailboxes? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 18:09:03 -0000 This is a cryptographically signed message in MIME format. --------------ms080202030102060806030302 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit >> Can a user have more than one system mailbox? >> >> E. g., some ISP provides the next service: a client can make any number of >> mailboxes for himself using web interface. >> Almost all ISP are using UNIX. >> So, how they do this? >> Does that web interface create a new system user every time >> I create a new mailbox? >> >> I have sendmail 8.13.6 on FreeBSD 6.1-RELEASE. Sorry, I missed OP. 1st: I doubt ISP's relies on unix accounts for mail. Rather they likely have clients in an ldap directory and mail on some database backend storage. 2nd: You can create an extra mailbox by adding a line to /etc/mail/aliases: mailbox_name: /path/to/mailbox_name then run newaliases. To let a user access the mailbox you need to set filepermissions accordingly. Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms080202030102060806030302 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMzE4MDg0 M1owIwYJKoZIhvcNAQkEMRYEFJyRewYU9jCSly/yglhjDceER+1QMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQC0+hGq+hIfHXHZUh6RIK3Z330pv+tJ m77XZ52zfkX1OnFl0JjAUwflG9dB5N9Akj7y8pdgG8F9BBv2/3w9nratiLl4EQPKqVqaFG4o 99enmIp18vPm/OA9pzku60q/hd8x5qDzQflvOn/IcO5JqQjtby0tPznrrVBtfM5LVF0c/6E5 pu/2sNnJDJ/USLDM6oI1A8fpWlQ7mrJ7+WApkpCa5HZKzhjtfbDCRW5pw/L/lkQ3P/RI0/aP 0nK6bBee5wxoXPtj+OIBGynXA+rs6GhbBrAcNREvfECiyuToTyGfJJLkN/25r6YuZlXyFW/w NMi20358AWDMtge58oLeSAvdAAAAAAAA --------------ms080202030102060806030302-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 18:12:17 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CB74F16A41F for ; Sat, 3 Jun 2006 18:12:17 +0000 (UTC) (envelope-from bsd@bathnetworks.com) Received: from lmail.bathnetworks.co.uk (mail.bathnetworks.com [84.92.24.252]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0B68E43D55 for ; Sat, 3 Jun 2006 18:12:08 +0000 (GMT) (envelope-from bsd@bathnetworks.com) Received: (qmail 19320 invoked by uid 510); 3 Jun 2006 19:18:44 +0100 Received: from 192.168.0.104 by lmail.bathnetworks.co.uk (envelope-from , uid 508) with qmail-scanner-1.24-st-qms (clamdscan: 0.88/1261. spamassassin: 3.0.2. perlscan: 1.24-st-qms. Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 1.19986 secs); 03 Jun 2006 18:18:44 -0000 X-Spam-Status: No, hits=-4.5 required=5.0 X-Antivirus-MYDOMAIN-Mail-From: bsd@bathnetworks.com via lmail.bathnetworks.co.uk X-Antivirus-MYDOMAIN: 1.24-st-qms (Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 1.19986 secs Process 19313) Received: from unknown (HELO ubuntu.bathnetworks.local.bathnetworks.local) (bsd@bathnetworks.com@192.168.0.104) by lmail.bathnetworks.co.uk with SMTP; 3 Jun 2006 19:18:42 +0100 From: robert To: Free BSD Content-Type: text/plain Date: Sat, 03 Jun 2006 19:12:04 +0100 Message-Id: <1149358324.9348.25.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.4.1 Content-Transfer-Encoding: 7bit Subject: Apache22 + PHP5 installation issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 18:12:17 -0000 Hi all, I am having problems with setting up a web server. I'm running FreeBSD 6.1-Release-P1, updated of yesterday. I have installed Apache22, php5 and php5-extensions from the ports. (I did check the build Apache module option in the php5 config). My first problem is that the handbook still refers the to mod_php which is not available. A search of the archives gave me the answer that it has been removed. My httpd.conf has: LoadModule php5_module libexec/apache22/libphp5.so To which I have added: AddType application/x- httpd-php .php AddType application/x- httpd-php-source .phps As per the pkg-message. The problem is that although I can connect to apache, php does not appear to run, all I get in a browser is unknown file type and a suggestion to download the file. I have also tried adding index.php to the DirectoryIndex I have to follow the handbook and tried this: DirectoryIndex index.php index.html AddType application/x- httpd-php .php AddType application/x- httpd-php-source .phps ie with php5_module rather than mod_php, but that also fails to work There is nothing in the apache-error.log nor messages that help. Any ideas, suggestions please. Rob From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 18:17:09 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7406E16A4F8 for ; Sat, 3 Jun 2006 18:17:09 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7AA2743D67 for ; Sat, 3 Jun 2006 18:17:05 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id 979D52E029 for ; Sat, 3 Jun 2006 20:17:04 +0200 (CEST) Message-ID: <4481D215.1070506@locolomo.org> Date: Sat, 03 Jun 2006 20:16:53 +0200 From: =?UTF-8?B?RXJpayBOw7hyZ2FhcmQ=?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: FreeBSD Questions Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms070300070507040706030502" Cc: Subject: kismet: madwifi_bg unknown capture source type X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 18:17:17 -0000 This is a cryptographically signed message in MIME format. --------------ms070300070507040706030502 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Hi: I have had this problem ... actually I think since I upgraded to 6.0. But I have just upgraded base and rebuilt kismet and the problem remains. Whenever I try to run kismet I get the following error: FATAL: Unknown capture source type 'madwifi_bg' in source 'madwifi_bg,ath0,default' I have a 3Com 11a/g card with Atheros chipset, and tried with both madwifi_ag, madwifi_bg, madwifi_b and madwifi_g. Same result. It appears that madwifi is not compiled but I can't figure where to enable that. How do I get madwifi working again? Thanks, Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms070300070507040706030502 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMzE4MTY1 M1owIwYJKoZIhvcNAQkEMRYEFMwetoNAoU0840Wv5ri8Lzm3FVSBMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQBrQT7GJRF4RmZVD9I/B8YzNssRI6X3 QaAa9WJpr1W4kb3jtN0cXsHokRB/e5+O8TEUFRLMC9L/zhqKYx8ab2iv5PeH1T41ptPgIPFY z3I7KK2BdS7kPksyeMBmX6TBV9iOMRF8h3Yok93ATBesryEQhGvuH0zN5nakhPLSwzcPTBuy 8qwRfpeqZJN3gSk8ajX7w2pXFHQYNoKEFIyXTa2KF3Oot4AX7gs4T+cktPuu+zksg0xm3Jeb HSE25yIPMpaf9jtKS7WeZQZ/QtZwlVgvJRKdWZzSoYn9Olmjxu1dybB5frOSWsy72xm5i29i W+5v+So1n2yN6o8mikIhM1fGAAAAAAAA --------------ms070300070507040706030502-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 18:33:00 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 85E6516A46F for ; Sat, 3 Jun 2006 18:33:00 +0000 (UTC) (envelope-from jason+lists.freebsd-questions@lixfeld.ca) Received: from eshara.ebit.ca (eshara.ebit.ca [69.90.17.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 395D543D49 for ; Sat, 3 Jun 2006 18:32:58 +0000 (GMT) (envelope-from jason+lists.freebsd-questions@lixfeld.ca) Received: from [216.7.194.254] (helo=[192.168.100.191]) by eshara.ebit.ca with esmtpsa (TLSv1:RC4-SHA:128) (Exim 4.54 (FreeBSD)) id 1Fmavh-000PpS-8V for freebsd-questions@freebsd.org; Sat, 03 Jun 2006 14:32:57 -0400 Mime-Version: 1.0 (Apple Message framework v750) Content-Transfer-Encoding: 7bit Message-Id: Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed To: FreeBSD Questions Mailing List From: Jason Lixfeld Date: Sat, 3 Jun 2006 14:32:53 -0400 X-Mailer: Apple Mail (2.750) Subject: Any current user experience with Asterisk on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 18:33:00 -0000 I don't like the idea of having to run Linux because their system tools just don't compare to FreeBSD, but I have had bad experience in the past with FreeBSD + Asterisk using software timing. This time around, I have a TDM400P with an FXO for timing, but I'm not sure what the zaptel support is like currently. Asking around in asterisk land is useless because they are all linux zealots so I can't get a straight answer except for "FreeBSD Sucks" so I'm hoping someone on this side of the fence can give me a little more comprehensive overview of their experiences. The system isn't anything complicated.. Just MoH, the TDM400P and Meetme.. Anyone have any experience, one way or the other? From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 19:04:30 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EF83116A4C6 for ; Sat, 3 Jun 2006 19:04:30 +0000 (UTC) (envelope-from bsd-unix@earthlink.net) Received: from pop-savannah.atl.sa.earthlink.net (pop-savannah.atl.sa.earthlink.net [207.69.195.69]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9B7EC43D46 for ; Sat, 3 Jun 2006 19:04:27 +0000 (GMT) (envelope-from bsd-unix@earthlink.net) Received: from fl-71-54-28-212.dhcp.sprint-hsd.net ([71.54.28.212] helo=kt.weeeble.com) by pop-savannah.atl.sa.earthlink.net with smtp (Exim 3.36 #10) id 1FmbQ6-0005gY-00; Sat, 03 Jun 2006 15:04:22 -0400 Date: Sat, 3 Jun 2006 15:05:09 -0400 From: Randy Pratt To: robert Message-Id: <20060603150509.b5fa9a8d.bsd-unix@earthlink.net> In-Reply-To: <1149358324.9348.25.camel@localhost.localdomain> References: <1149358324.9348.25.camel@localhost.localdomain> X-Mailer: Sylpheed version 2.2.5 (GTK+ 2.8.18; i386-portbld-freebsd6.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Apache22 + PHP5 installation issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 19:04:32 -0000 On Sat, 03 Jun 2006 19:12:04 +0100 robert wrote: > Hi all, > > I am having problems with setting up a web server. I'm running FreeBSD > 6.1-Release-P1, updated of yesterday. > > I have installed Apache22, php5 and php5-extensions from the ports. (I > did check the build Apache module option in the php5 config). > > My first problem is that the handbook still refers the to mod_php which > is not available. A search of the archives gave me the answer that it > has been removed. There's been some changes to the way PHP is organized. Take a look at /usr/ports/UPDATING, particularly the 20060506 entry for users of PHP. If I remember correctly: cd /usr/ports/lang/php5 make config (select "Build Apache Module") make install clean (or portupgrade -f php5-\* if you already have it installed) This has also been discussed and should be in the archives. HTH Randy -- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 19:06:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 348EA16A4CB for ; Sat, 3 Jun 2006 19:06:44 +0000 (UTC) (envelope-from chad@shire.net) Received: from hobbiton.shire.net (mail.shire.net [166.70.252.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id E0DFB43D46 for ; Sat, 3 Jun 2006 19:06:43 +0000 (GMT) (envelope-from chad@shire.net) Received: from [67.171.127.191] (helo=[192.168.99.68]) by hobbiton.shire.net with esmtpa (Exim 4.51) id 1FmbSN-000BDw-4K; Sat, 03 Jun 2006 13:06:43 -0600 In-Reply-To: References: Mime-Version: 1.0 (Apple Message framework v750) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: "Chad Leigh -- Shire.Net LLC" Date: Sat, 3 Jun 2006 13:06:40 -0600 To: Jason Lixfeld X-Mailer: Apple Mail (2.750) X-SA-Exim-Connect-IP: 67.171.127.191 X-SA-Exim-Mail-From: chad@shire.net X-SA-Exim-Scanned: No (on hobbiton.shire.net); SAEximRunCond expanded to false Cc: FreeBSD Questions Mailing List Subject: Re: Any current user experience with Asterisk on FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 19:06:45 -0000 On Jun 3, 2006, at 12:32 PM, Jason Lixfeld wrote: > I don't like the idea of having to run Linux because their system > tools just don't compare to FreeBSD, but I have had bad experience > in the past with FreeBSD + Asterisk using software timing. This > time around, I have a TDM400P with an FXO for timing, but I'm not > sure what the zaptel support is like currently. > > Asking around in asterisk land is useless because they are all > linux zealots so I can't get a straight answer except for "FreeBSD > Sucks" so I'm hoping someone on this side of the fence can give me > a little more comprehensive overview of their experiences. > > The system isn't anything complicated.. Just MoH, the TDM400P and > Meetme.. > > Anyone have any experience, one way or the other? You might want to ask on the asterisk-bsd list List-Id: Asterisk on BSD discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , From what I gather it seems to be getting better. I tried back in Jan and had some issues with my TDM400 cards but it sounds like the issue was fixed. I am just getting back in and am probably going the Linux route :-( for now since it seems to be more mature there and the 3rd party add-ons are Linux based and I just need to get the phone system running and forget about it (figuratively). Chad --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 19:12:02 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2FFAA16A475 for ; Sat, 3 Jun 2006 19:12:02 +0000 (UTC) (envelope-from a@zeos.net) Received: from mailgate.kv.ukrtel.net (mailgate.kv.ukrtel.net [213.179.244.11]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6F67F43D48 for ; Sat, 3 Jun 2006 19:12:01 +0000 (GMT) (envelope-from a@zeos.net) Received: from localhost (localhost.kv.ukrtel.net [127.0.0.1]) by localhost (Postfix) with SMTP id 67CE71AF522; Sat, 3 Jun 2006 22:12:00 +0300 (EEST) Received: from localhost.my.domain (170-16-207-82.pool.ukrtel.net [82.207.16.170]) by mailgate.kv.ukrtel.net (Postfix) with ESMTP id AAP414481DF00816E; Sat, 3 Jun 2006 22:12:00 +0300 (EEST) Received: from localhost.my.domain (localhost [127.0.0.1]) by localhost.my.domain (8.13.6/8.13.6) with ESMTP id k53JBtde007142; Sat, 3 Jun 2006 22:11:55 +0300 (EEST) (envelope-from a@zeos.net) Received: (from elisej@localhost) by localhost.my.domain (8.13.6/8.13.6/Submit) id k53JBtKd007141; Sat, 3 Jun 2006 22:11:55 +0300 (EEST) (envelope-from a@zeos.net) X-Authentication-Warning: localhost.my.domain: elisej set sender to a@zeos.net using -f Date: Sat, 3 Jun 2006 22:11:55 +0300 From: a@zeos.net To: Erik N??rgaard Message-ID: <20060603191155.GA7106@localhost> Mail-Followup-To: Erik N??rgaard , freebsd-questions@freebsd.org References: <20060603072410.GA4329@localhost> <002c01c686fa$001770c0$0d02afcb@louigi> <4481D02B.8050907@locolomo.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <4481D02B.8050907@locolomo.org> User-Agent: mutt-ng/devel-r581 (FreeBSD) Cc: freebsd-questions@freebsd.org Subject: Re: Can one user have more than one system mailboxes? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 19:12:02 -0000 On Sat, Jun 03, 2006 at 08:08:43PM +0200, Erik N??rgaard wrote: > >> Can a user have more than one system mailbox? > >> > >> E. g., some ISP provides the next service: a client can make any number of > >> mailboxes for himself using web interface. > >> Almost all ISP are using UNIX. > >> So, how they do this? > >> Does that web interface create a new system user every time > >> I create a new mailbox? > >> > >> I have sendmail 8.13.6 on FreeBSD 6.1-RELEASE. > > Sorry, I missed OP. 1st: I doubt ISP's relies on unix accounts for mail. > Rather they likely have clients in an ldap directory and mail on some > database backend storage. > > 2nd: You can create an extra mailbox by adding a line to /etc/mail/aliases: > > mailbox_name: /path/to/mailbox_name > > then run newaliases. To let a user access the mailbox you need to set > filepermissions accordingly. > > Erik > -- > Ph: +34.666334818 web: http://www.locolomo.org > X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt > Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 1st: It is interesting. 2nd: Thank you very much. Elisej Babenko From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 19:33:39 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7034216A4DD for ; Sat, 3 Jun 2006 19:33:39 +0000 (UTC) (envelope-from maanjee@gmail.com) Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id E78C043D45 for ; Sat, 3 Jun 2006 19:33:37 +0000 (GMT) (envelope-from maanjee@gmail.com) Received: by py-out-1112.google.com with SMTP id m51so973424pye for ; Sat, 03 Jun 2006 12:33:37 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=MFaRwvYxzpCSdICDrfv4alrbQLf/HaZbebPf9SNrlD335FRKBh2whMIPDSKmFM2jnrft6VV9jnxzXzgEAKg07TXUVGmrBrW3gPiizf4lodEncJKqgonGu0QvDy0CQk31FLGxl684cp1dut7ucGpcmi/T0naSkbLhls+qjK5YXMY= Received: by 10.35.113.12 with SMTP id q12mr4105806pym; Sat, 03 Jun 2006 12:33:36 -0700 (PDT) Received: by 10.35.32.9 with HTTP; Sat, 3 Jun 2006 12:33:36 -0700 (PDT) Message-ID: <2cd0a0da0606031233w598cdec4obbc0472bca85e297@mail.gmail.com> Date: Sat, 3 Jun 2006 21:33:36 +0200 From: VeeJay To: "=?ISO-8859-1?Q?Erik_N=F8rgaard?=" In-Reply-To: <44816592.9080900@locolomo.org> MIME-Version: 1.0 References: <2cd0a0da0606030309y363dd8c6o9b5cd5d4b6366b46@mail.gmail.com> <44816592.9080900@locolomo.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-questions@freebsd.org Subject: Re: Help: Novice - Hardware Advice! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 19:33:41 -0000 Thanks for your advice. Almost all pages will be generated dynamically (php). Bandwidth is ADSL with 1Mb Upstream and 24Mb Downstream. (Don't know if it is enough?) Traffic is like going to grow upto 50000 hits or more a day. Since I am building an article liberary. How can I implement Apache Proxy or Squid Proxy? How can I make the server more robust? Looking forward for your comments... VJ.... On 6/3/06, Erik N=F8rgaard wrote: > > Maan Jee wrote: > > Hello friends and fellows > > > > Today, I wanna have some hardware advice: > > > > I wanna build A super duper FreeBSD Web Server Box with apache2, mysql5= , > > php, etc. > > > > But I am just unsure about what kind of hardware I should buy since I a= m > > not > > having a big budget but do have a reasonable.... > > > > There gonna be many database queries load fetching data from > mysql-server. > > > > What kind of Hardware I should buy? > > > > 1. Motherboad? > > > > 2. Processor? > > > > 3. RAM? > > (What kind of and how much should be reasonable enough) > > > > 4. Storage System? > > > > I am looking for a solution with very reasonable cost and best > efficiency > > :o) > > How much traffic will you serve? > > This is also limited by the bandwidth you have - if you have an adsl > connection usually downstream is higher than up stream, but serving > pages go mostly upstream. > > How much work will the server do to generate pages? > > If everything is dynamic and you have a badly coded site it costs. You > can get much efficiency with good code and/or apache proxy, or a squid > proxy. > > I bought a mini-itx with 1Ghz Via chip and 256MB ram, 60GB IDE disk. > Should I buy a new system today I would go for a fanless slower version. > > It serves just fine, not only web pages but also mail, database, ldap, > dns, dhcp, imap as well as being firewall/router for the local network. > It seems that most resources are consumed by the smtp server blocking > spam. > > It's also reasonable cheap, around 400 euros, and consumes only around > 30W. > > Cheers, Erik > -- > Ph: +34.666334818 web: http://www.locolomo.org > X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt > Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 > > > --=20 Thanks! BR / mj From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 20:02:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BE30016A420 for ; Sat, 3 Jun 2006 20:02:42 +0000 (UTC) (envelope-from toomas.aas@raad.tartu.ee) Received: from mail.neti.ee (smtp-out-3.neti.ee [194.126.101.111]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3D29E43D46 for ; Sat, 3 Jun 2006 20:02:40 +0000 (GMT) (envelope-from toomas.aas@raad.tartu.ee) Received: from [88.196.100.18] (88-196-100-18-dsl.trt.estpak.ee [88.196.100.18]) by Relayhost2.neti.ee (Postfix) with ESMTP id 5B2C41519F; Sat, 3 Jun 2006 23:02:37 +0300 (EEST) Message-ID: <4481EADD.3070501@raad.tartu.ee> Date: Sat, 03 Jun 2006 23:02:37 +0300 From: Toomas Aas User-Agent: Thunderbird 1.5.0.2 (X11/20060424) MIME-Version: 1.0 To: robert References: <1149358324.9348.25.camel@localhost.localdomain> In-Reply-To: <1149358324.9348.25.camel@localhost.localdomain> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new-2.2.1 (20041222) (Debian) at neti.ee Cc: Free BSD Subject: Re: Apache22 + PHP5 installation issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 20:02:42 -0000 robert wrote: > My httpd.conf has: > > LoadModule php5_module libexec/apache22/libphp5.so > > To which I have added: > > AddType application/x- httpd-php .php > AddType application/x- httpd-php-source .phps ^ You should not have a space here > I have also tried adding index.php to the DirectoryIndex > > I have to follow the handbook and tried this: > > > DirectoryIndex index.php index.html > > > AddType application/x- httpd-php .php > AddType application/x- httpd-php-source .phps ^ Here too > From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 20:15:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E36E16A41F for ; Sat, 3 Jun 2006 20:15:50 +0000 (UTC) (envelope-from norgaard@locolomo.org) Received: from strange.daemonsecurity.com (59.Red-81-33-11.staticIP.rima-tde.net [81.33.11.59]) by mx1.FreeBSD.org (Postfix) with ESMTP id 496E443D46 for ; Sat, 3 Jun 2006 20:15:47 +0000 (GMT) (envelope-from norgaard@locolomo.org) Received: from [172.16.2.1] (charm.daemonsecurity.com [172.16.2.1]) by strange.daemonsecurity.com (Postfix) with ESMTP id B66142E029; Sat, 3 Jun 2006 22:15:45 +0200 (CEST) Message-ID: <4481EDDA.1040003@locolomo.org> Date: Sat, 03 Jun 2006 22:15:22 +0200 From: =?ISO-8859-1?Q?Erik_N=F8rgaard?= Organization: Locolomo.ORG User-Agent: Thunderbird 1.5.0.2 (X11/20060423) MIME-Version: 1.0 To: VeeJay References: <2cd0a0da0606030309y363dd8c6o9b5cd5d4b6366b46@mail.gmail.com> <44816592.9080900@locolomo.org> <2cd0a0da0606031233w598cdec4obbc0472bca85e297@mail.gmail.com> In-Reply-To: <2cd0a0da0606031233w598cdec4obbc0472bca85e297@mail.gmail.com> Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms010208090602000802010809" Cc: freebsd-questions@freebsd.org Subject: Re: Help: Novice - Hardware Advice! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 20:15:50 -0000 This is a cryptographically signed message in MIME format. --------------ms010208090602000802010809 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit VeeJay wrote: > Thanks for your advice. > > Almost all pages will be generated dynamically (php). > > Bandwidth is ADSL with 1Mb Upstream and 24Mb Downstream. > (Don't know if it is enough?) First, your speed is likely 1Mbit and not 1Mbyte (1Mb) You can make some rough estimates once you have your site running and know how much an average page is. But, (almost) any system that you can get hands on today will be able to serve your site. Generally: If people have to wait more than 10 sec for a page to load, it's too slow. > Traffic is like going to grow upto 50000 hits or more a day. Since I am > building an article liberary. > > How can I implement Apache Proxy or Squid Proxy? You need to build Apache WITH_PROXY_MODULE=yes then configure, see the apache documentation, it is fairly thorough. Squid is also in ports. I suggest you leave it til you have your site up running and see the bottlenecks. > How can I make the server more robust? The answer is not a "one-liner". You should really get hands on the great manuals on hardening both system and services. Erik -- Ph: +34.666334818 web: http://www.locolomo.org X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 --------------ms010208090602000802010809 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: S/MIME Cryptographic Signature MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIL5jCC Be8wggPXoAMCAQICCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQUFADCBmTELMAkGA1UEBhMCRVMx GDAWBgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9y aXR5MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNh QGRhZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMDAeFw0wNjA0MjAxMzE2NTBaFw0wNzA0 MjAxMzE2NTBaMGIxCzAJBgNVBAYTAkVTMRUwEwYDVQQKEwxMb2NvTG9tby5PcmcxFjAUBgNV BAMTDUVyaWsgTm9yZ2FhcmQxJDAiBgkqhkiG9w0BCQEWFW5vcmdhYXJkQGxvY29sb21vLm9y ZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMPmPk5QnkyvR4ZNS/jYCYEk6/x/ mqSIqM7XXmikYX4AmbS4AbgJg7tY150ti87oYIjH4pnt1ReYWV4P2lDE2w0Db73Fk3TGpYcq XNUu4uRl8eoMX6Mh5I34tzJc+ZJqXW0pQtzP7JDgPvLddh0roY/ongaqpnrA6dDh0QfEC+ky z1abx9xmp776RPfRnbzjUht9VGPohiZFLyNfLgw5x4Q5/efDtx3tKDMJP67UnVd1tbclKbOs +HaqxYXNr1TJ9HIpRpfb4IhBFCvBDiiHUjbGtpi2EXeHuwoQ8cp7mjl6j1BfGaoFHvqzA1GD +156qJ9waxEvx/0XGudqWJeFTVkCAwEAAaOCAW4wggFqMA8GA1UdEwEB/wQFMAMCAQAwCwYD VR0PBAQDAgO4MB0GA1UdDgQWBBRpebgs44/nvl3Dw7F0Yrg/nx9puTCBzgYDVR0jBIHGMIHD gBSOYakm6rz5V4h0qO3QlbBuYT3ipaGBn6SBnDCBmTELMAkGA1UEBhMCRVMxGDAWBgNVBAoT D0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MR4wHAYD VQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRhZW1vbnNl Y3VyaXR5LmNvbTEKMAgGA1UEBRMBMIIJAI0DVR/84E8BMCAGA1UdEQQZMBeBFW5vcmdhYXJk QGxvY29sb21vLm9yZzA4BgNVHR8EMTAvMC2gK6AphidodHRwOi8vd3d3LmRhZW1vbnNlY3Vy aXR5LmNvbS9jYS9kcy5jcmwwDQYJKoZIhvcNAQEFBQADggIBAMefA0DXBeUmPG353ldj4jQP TKusU49AGPtH0gI0W7gnc8L6NQb7/lzpF1xW3fVOXmDBSQrSzdsmPoUiQBOv8/GTPiJbktbr eHGPDDi7xTmNgGCh/gv9EECEc0casKs778FMhJxQDIKUrBpdxpxUVHxzR9m2MgCaiOPi0oru o5ZjdNh4PyfSrYkkMJmp9w7ouulyf7wSOwwyIxZixWHVIo0lJBZCFQqIcCXzmnLUhlUKqMGb 0sOsPh7GITecrfGAM8iBpLuRjGe3yDa8Xx2riflJLjKxqcSg0OIhibS3xkGTgoJhtAJBB21G CkcnHmLXmnXYZvfE/D4twmSGo3j4D79xFA5xMJU5IwNYT+agU2srRq11eZvtVK3p2sF2rgSK 99cbCHL0K3AhhiF9z+1uLjZO8UgnvB81rQG+Kzn/nvZgQ1bvxKnrtzs3UuKPyAXflNVSiMwO vUv04tBJcIGrdiav64BTQFBgguY7JWWkrsaTeEMUHXW6aUyGCfngQ2LR6McfDeZZLM0BKXiv pjozutGTR76khWqSsttSZQoGoNbMRcHodFCZ2RHSsM1rPKINY1w7vTnr8oEVD3D+pY1UrM/o vDkvS8ypr+gg66pMC0gXl7cReoFNiE118sHKlAEGKNlka3Pga2r+AL6KrjwCZHMwOFDheFoN k9rxTruKV0O0MIIF7zCCA9egAwIBAgIJAI0DVR/84E8MMA0GCSqGSIb3DQEBBQUAMIGZMQsw CQYDVQQGEwJFUzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZp Y2F0ZSBBdXRob3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqG SIb3DQEJARYVY2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwMB4XDTA2MDQyMDEz MTY1MFoXDTA3MDQyMDEzMTY1MFowYjELMAkGA1UEBhMCRVMxFTATBgNVBAoTDExvY29Mb21v Lk9yZzEWMBQGA1UEAxMNRXJpayBOb3JnYWFyZDEkMCIGCSqGSIb3DQEJARYVbm9yZ2FhcmRA bG9jb2xvbW8ub3JnMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw+Y+TlCeTK9H hk1L+NgJgSTr/H+apIioztdeaKRhfgCZtLgBuAmDu1jXnS2LzuhgiMfime3VF5hZXg/aUMTb DQNvvcWTdMalhypc1S7i5GXx6gxfoyHkjfi3Mlz5kmpdbSlC3M/skOA+8t12HSuhj+ieBqqm esDp0OHRB8QL6TLPVpvH3GanvvpE99GdvONSG31UY+iGJkUvI18uDDnHhDn958O3He0oMwk/ rtSdV3W1tyUps6z4dqrFhc2vVMn0cilGl9vgiEEUK8EOKIdSNsa2mLYRd4e7ChDxynuaOXqP UF8ZqgUe+rMDUYP7Xnqon3BrES/H/Rca52pYl4VNWQIDAQABo4IBbjCCAWowDwYDVR0TAQH/ BAUwAwIBADALBgNVHQ8EBAMCA7gwHQYDVR0OBBYEFGl5uCzjj+e+XcPDsXRiuD+fH2m5MIHO BgNVHSMEgcYwgcOAFI5hqSbqvPlXiHSo7dCVsG5hPeKloYGfpIGcMIGZMQswCQYDVQQGEwJF UzEYMBYGA1UEChMPRGFlbW9uIFNlY3VyaXR5MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRo b3JpdHkxHjAcBgNVBAMTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEkMCIGCSqGSIb3DQEJARYV Y2FAZGFlbW9uc2VjdXJpdHkuY29tMQowCAYDVQQFEwEwggkAjQNVH/zgTwEwIAYDVR0RBBkw F4EVbm9yZ2FhcmRAbG9jb2xvbW8ub3JnMDgGA1UdHwQxMC8wLaAroCmGJ2h0dHA6Ly93d3cu ZGFlbW9uc2VjdXJpdHkuY29tL2NhL2RzLmNybDANBgkqhkiG9w0BAQUFAAOCAgEAx58DQNcF 5SY8bfneV2PiNA9Mq6xTj0AY+0fSAjRbuCdzwvo1Bvv+XOkXXFbd9U5eYMFJCtLN2yY+hSJA E6/z8ZM+IluS1ut4cY8MOLvFOY2AYKH+C/0QQIRzRxqwqzvvwUyEnFAMgpSsGl3GnFRUfHNH 2bYyAJqI4+LSiu6jlmN02Hg/J9KtiSQwman3Dui66XJ/vBI7DDIjFmLFYdUijSUkFkIVCohw JfOactSGVQqowZvSw6w+HsYhN5yt8YAzyIGku5GMZ7fINrxfHauJ+UkuMrGpxKDQ4iGJtLfG QZOCgmG0AkEHbUYKRyceYteaddhm98T8Pi3CZIajePgPv3EUDnEwlTkjA1hP5qBTaytGrXV5 m+1UrenawXauBIr31xsIcvQrcCGGIX3P7W4uNk7xSCe8HzWtAb4rOf+e9mBDVu/Eqeu3OzdS 4o/IBd+U1VKIzA69S/Ti0Elwgat2Jq/rgFNAUGCC5jslZaSuxpN4QxQddbppTIYJ+eBDYtHo xx8N5lkszQEpeK+mOjO60ZNHvqSFapKy21JlCgag1sxFweh0UJnZEdKwzWs8og1jXDu9Oevy gRUPcP6ljVSsz+i8OS9LzKmv6CDrqkwLSBeXtxF6gU2ITXXywcqUAQYo2WRrc+Brav4Avoqu PAJkczA4UOF4Wg2T2vFOu4pXQ7QxggP8MIID+AIBATCBpzCBmTELMAkGA1UEBhMCRVMxGDAW BgNVBAoTD0RhZW1vbiBTZWN1cml0eTEeMBwGA1UECxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5 MR4wHAYDVQQDExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxJDAiBgkqhkiG9w0BCQEWFWNhQGRh ZW1vbnNlY3VyaXR5LmNvbTEKMAgGA1UEBRMBMAIJAI0DVR/84E8MMAkGBSsOAwIaBQCgggIp MBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA2MDYwMzIwMTUy NFowIwYJKoZIhvcNAQkEMRYEFA8ENDLnN+jFEfPcv5Saq1gwJClHMFIGCSqGSIb3DQEJDzFF MEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIH MA0GCCqGSIb3DQMCAgEoMIG4BgkrBgEEAYI3EAQxgaowgacwgZkxCzAJBgNVBAYTAkVTMRgw FgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAcBgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0 eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBk YWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUTATACCQCNA1Uf/OBPDDCBugYLKoZIhvcNAQkQ AgsxgaqggacwgZkxCzAJBgNVBAYTAkVTMRgwFgYDVQQKEw9EYWVtb24gU2VjdXJpdHkxHjAc BgNVBAsTFUNlcnRpZmljYXRlIEF1dGhvcml0eTEeMBwGA1UEAxMVQ2VydGlmaWNhdGUgQXV0 aG9yaXR5MSQwIgYJKoZIhvcNAQkBFhVjYUBkYWVtb25zZWN1cml0eS5jb20xCjAIBgNVBAUT ATACCQCNA1Uf/OBPDDANBgkqhkiG9w0BAQEFAASCAQA5bp11meoMp7lHQ3en/pfWS8gwnu96 nWZDJq42lqrQfXyn3ZCXtKJCthBN9P7o1/s8P2RtJmsvbtof2/BY2oABiMrUXXfV2GySjj5U 8uZ5t+ECXnWkkzvn6QGXm7GPOOO7i8YrHACeao70/TbsCk5w/VqYaH+FQ+b2Sr87U2UkU4e4 gswmiAuXlLy41I+a2XRfwzD41d4nf1Eq/k/1eixfyYKURbBWXQAYSZkajedUoiTyw/e/LGrQ iORS1K+IQj2Jvd/1jLCWkZlTwdS7oUcogP1TRdwrBvnOESlFSL1qNVbmOhE+wLoHabuXITXc xdYqmDVKxVS7PcnpR4xqIEmUAAAAAAAA --------------ms010208090602000802010809-- From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 20:28:21 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AEBF516A46F for ; Sat, 3 Jun 2006 20:28:21 +0000 (UTC) (envelope-from lists@subhi.com) Received: from fonzi.54blackfriars-st.e-corner.co.uk (fonzi.54blackfriars-st.e-corner.co.uk [82.108.102.244]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4312843D46 for ; Sat, 3 Jun 2006 20:28:21 +0000 (GMT) (envelope-from lists@subhi.com) Received: from [10.10.11.175] (helo=CAESAR) by fonzi.54blackfriars-st.e-corner.co.uk with esmtp (Exim 4.61 (FreeBSD)) (envelope-from ) id 1FmclJ-000OvX-Dj for freebsd-questions@freebsd.org; Sat, 03 Jun 2006 21:30:21 +0100 Date: Sat, 3 Jun 2006 21:28:18 +0100 From: Subhi S Hashwa X-Mailer: The Bat! (v3.80.06) Professional X-Priority: 3 (Normal) Message-ID: <1991044713.20060603212818@subhi.com> To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: weird arp issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Subhi S Hashwa List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 20:28:21 -0000 Hello all, I am having weird issue with arp/mac address on local gateway machine The following is from /var/log/messages Jun 3 21:14:58 nile kernel: arp_rtrequest: bad gateway 193.19.XXX.1 (!AF_LINK) when checking arp table : chesfw1-e1-0 (193.19.XXX.1) at 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.10.2.0.0.c1.13.e8.1.0.0.0.0.0.0.0.0.ec.0.5.4.1.0.ff.7f.5.4.2.0.33.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.4.0.0.0.0.0.0.20.0.0.0.0.dc.5.0.0.0.0.0.0.b5.f2.81.44.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.10.2.0.0.c1.13.e8.3.0.0.0.0.0.0.0.0.36.12.1.0.6.0.6.0.0.d.60.d4.37.3c.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.38.12.1.0.6.3.6 permanent The IP is an alias on a local NIC, rather than a remote MAC. when I try to delete it I get 21:16:41 [root@nile ~]# arp -d -a delete: cannot locate 193.19.XXX.1 The machine initially boots up fine with the right mac address for the IP but then it starts showing these errors. the machine is running routed and pf and is filtering about 20Mbps 21:23:08 [root@nile ~]# netstat -rn|grep 193.19.XXX.1 193.19.XXX.1 193.19.XXX.1 UHLW 1 4 lo0 => 193.19.XXX.1/32 link#1 UC 0 0 em0 uname: FreeBSD XXX.XXXX.com 6.0-RELEASE-p5 FreeBSD 6.0-RELEASE-p5 ifconfig : em0: flags=8843 mtu 1500 options=b inet6 fe80::211:43ff:fee7:bd77%em0 prefixlen 64 scopeid 0x1 inet 193.19.XXX.1 netmask 0xffffffff broadcast 193.19.XXX.1 inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:11:43:e7:bd:77 media: Ethernet autoselect (100baseTX ) status: active Any ideas or pointers ? -- Best regards, Subhi S Hashwa mailto:lists@subhi.com When everything is heading your way, you're in the wrong lane. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 20:43:52 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1B3CB16A494 for ; Sat, 3 Jun 2006 20:43:52 +0000 (UTC) (envelope-from bsd@bathnetworks.com) Received: from lmail.bathnetworks.co.uk (mail.bathnetworks.com [84.92.24.252]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4356043D48 for ; Sat, 3 Jun 2006 20:43:51 +0000 (GMT) (envelope-from bsd@bathnetworks.com) Received: (qmail 20639 invoked by uid 510); 3 Jun 2006 21:50:26 +0100 Received: from 192.168.0.104 by lmail.bathnetworks.co.uk (envelope-from , uid 508) with qmail-scanner-1.24-st-qms (clamdscan: 0.88/1261. spamassassin: 3.0.2. perlscan: 1.24-st-qms. Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 2.125163 secs); 03 Jun 2006 20:50:26 -0000 X-Spam-Status: No, hits=-4.5 required=5.0 X-Antivirus-MYDOMAIN-Mail-From: bsd@bathnetworks.com via lmail.bathnetworks.co.uk X-Antivirus-MYDOMAIN: 1.24-st-qms (Clear:RC:0(192.168.0.104):SA:0(-4.5/5.0):. Processed in 2.125163 secs Process 20632) Received: from unknown (HELO ubuntu.bathnetworks.local.bathnetworks.local) (bsd@bathnetworks.com@192.168.0.104) by lmail.bathnetworks.co.uk with SMTP; 3 Jun 2006 21:50:23 +0100 From: robert To: Randy Pratt In-Reply-To: <20060603150509.b5fa9a8d.bsd-unix@earthlink.net> References: <1149358324.9348.25.camel@localhost.localdomain> <20060603150509.b5fa9a8d.bsd-unix@earthlink.net> Content-Type: text/plain Date: Sat, 03 Jun 2006 21:43:45 +0100 Message-Id: <1149367425.9348.36.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.4.1 Content-Transfer-Encoding: 7bit Cc: freebsd-questions@freebsd.org Subject: Re: Apache22 + PHP5 installation issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 20:43:52 -0000 On Sat, 2006-06-03 at 15:05 -0400, Randy Pratt wrote: > On Sat, 03 Jun 2006 19:12:04 +0100 > robert wrote: > > > Hi all, > > > > I am having problems with setting up a web server. I'm running FreeBSD > > 6.1-Release-P1, updated of yesterday. > > > > I have installed Apache22, php5 and php5-extensions from the ports. (I > > did check the build Apache module option in the php5 config). > > > > My first problem is that the handbook still refers the to mod_php which > > is not available. A search of the archives gave me the answer that it > > has been removed. > > There's been some changes to the way PHP is organized. Take a look > at /usr/ports/UPDATING, particularly the 20060506 entry for users > of PHP. > > If I remember correctly: > > cd /usr/ports/lang/php5 > make config > (select "Build Apache Module") > make install clean > (or portupgrade -f php5-\* if you already have it installed) > > This has also been discussed and should be in the archives. > > HTH > > Randy Thanks Randy, I originally built php5 with build Apache module and the libphp5.so is present on my system (the ports were updated with portsnap yesterday). I have tried forcing a rebuild but that has not changed anything. Rob From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 20:57:44 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0886216A477 for ; Sat, 3 Jun 2006 20:57:44 +0000 (UTC) (envelope-from kyrreny@broadpark.no) Received: from osl1smout1.broadpark.no (osl1smout1.broadpark.no [80.202.4.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 98F5943D48 for ; Sat, 3 Jun 2006 20:57:43 +0000 (GMT) (envelope-from kyrreny@broadpark.no) Received: from osl1sminn1.broadpark.no ([80.202.4.59]) by osl1smout1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J0A001Q6Y869K10@osl1smout1.broadpark.no> for questions@freebsd.org; Sat, 03 Jun 2006 22:57:42 +0200 (CEST) Received: from urban.broadpark.no ([80.203.212.30]) by osl1sminn1.broadpark.no (Sun Java System Messaging Server 6.1 HotFix 0.05 (built Oct 21 2004)) with ESMTP id <0J0A00H9SY8664L0@osl1sminn1.broadpark.no> for questions@freebsd.org; Sat, 03 Jun 2006 22:57:42 +0200 (CEST) Date: Sat, 03 Jun 2006 22:57:46 +0200 From: Kyrre Nygard To: questions@freebsd.org Message-id: <7.0.1.0.2.20060603225657.020a0a98@broadpark.no> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Version 7.0.1.0 Content-type: text/plain; charset=us-ascii; format=flowed Content-transfer-encoding: 7BIT Cc: Subject: Hiding dot files with ftpd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 20:57:45 -0000 What's up all? Just wondering if it's possible to hide dot files somehow with FreeBSD's default ftpd when I invoke it from inetd? ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l Thanks, Kyrre From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 21:01:44 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 994C216A47A for ; Sat, 3 Jun 2006 21:01:44 +0000 (UTC) (envelope-from bsd@bathnetworks.com) Received: from lmail.bathnetworks.co.uk (mail.bathnetworks.com [84.92.24.252]) by mx1.FreeBSD.org (Postfix) with ESMTP id AE85943D46 for ; Sat, 3 Jun 2006 21:01:43 +0000 (GMT) (envelope-from bsd@bathnetworks.com) Received: (qmail 20827 invoked by uid 510); 3 Jun 2006 22:08:20 +0100 Received: from 192.168.0.104 by lmail.bathnetworks.co.uk (envelope-from , uid 508) with qmail-scanner-1.24-st-qms (clamdscan: 0.88/1261. spamassassin: 3.0.2. perlscan: 1.24-st-qms. Clear:RC:0(192.168.0.104):SA:0(-4.6/5.0):. Processed in 0.924581 secs); 03 Jun 2006 21:08:20 -0000 X-Spam-Status: No, hits=-4.6 required=5.0 X-Antivirus-MYDOMAIN-Mail-From: bsd@bathnetworks.com via lmail.bathnetworks.co.uk X-Antivirus-MYDOMAIN: 1.24-st-qms (Clear:RC:0(192.168.0.104):SA:0(-4.6/5.0):. Processed in 0.924581 secs Process 20820) Received: from unknown (HELO ubuntu.bathnetworks.local.bathnetworks.local) (bsd@bathnetworks.com@192.168.0.104) by lmail.bathnetworks.co.uk with SMTP; 3 Jun 2006 22:08:19 +0100 From: robert To: Toomas Aas In-Reply-To: <4481EADD.3070501@raad.tartu.ee> References: <1149358324.9348.25.camel@localhost.localdomain> <4481EADD.3070501@raad.tartu.ee> Content-Type: text/plain Date: Sat, 03 Jun 2006 22:01:41 +0100 Message-Id: <1149368501.9348.41.camel@localhost.localdomain> Mime-Version: 1.0 X-Mailer: Evolution 2.4.1 Content-Transfer-Encoding: 7bit Cc: Free BSD Subject: Re: Apache22 + PHP5 installation issues X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 21:01:44 -0000 On Sat, 2006-06-03 at 23:02 +0300, Toomas Aas wrote: > robert wrote: > > > My httpd.conf has: > > > > LoadModule php5_module libexec/apache22/libphp5.so > > > > To which I have added: > > > > AddType application/x- httpd-php .php > > AddType application/x- httpd-php-source .phps > ^ > You should not have a space here > > > I have also tried adding index.php to the DirectoryIndex > > > > I have to follow the handbook and tried this: > > > > > > DirectoryIndex index.php index.html > > > > > > AddType application/x- httpd-php .php > > AddType application/x- httpd-php-source .phps > ^ > Here too > > Toomas, Thanks I corrected this and restarted Apache, unfortunately still the same problem. Rob From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 21:28:49 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CB92716A46F for ; Sat, 3 Jun 2006 21:28:49 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4455F43D49 for ; Sat, 3 Jun 2006 21:28:49 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53LSfx46340; Sat, 3 Jun 2006 14:28:41 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Erik Trulsson" Date: Sat, 3 Jun 2006 14:28:44 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060602074025.GA65041@owl.midgard.homeip.net> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Cc: questions@freebsd.org, danial_thom@yahoo.com Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 21:28:49 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Erik Trulsson >Sent: Friday, June 02, 2006 12:40 AM >To: Ted Mittelstaedt >Cc: danial_thom@yahoo.com; questions@freebsd.org >Subject: Re: Recommendation for 1000BASE-SX card? > > >On Thu, Jun 01, 2006 at 05:01:08PM -0700, Ted Mittelstaedt wrote: >> >> >> >-----Original Message----- >> >From: owner-freebsd-questions@freebsd.org >> >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Chuck Swiger >> >Sent: Thursday, June 01, 2006 8:24 AM >> >To: danial_thom@yahoo.com >> >Cc: questions@freebsd.org >> >Subject: Re: Recommendation for 1000BASE-SX card? >> > >> > >[...] > >> >> > but I'm >> >generally of >> >the opinion that FreeBSD works just fine, most of the time, on >> >most hardware, >> >without any specific tweaking or tuning to be entirely usable. >> > >> >> It does not. In reality, current versions of FreeBSD work better >> on current versions of hardware. FreeBSD has a terrible history >> of breaking things that used to work on old hardware, then >> when someone complains that something is broken, the developers >> in effect tell them their old hardware is crappy junk and to buy new >> hardware. >> >> Try running FreeBSD 6.X on a 80486 or Pentium system. > >FreeBSD 6.x works just fine on a Pentium system, as long as you >have enough >memory. > Most Pentium 60's and Pentium 133's shipped from the factory with no more than 32MB of ram. That's only enough to load FreeBSD itself, not any applications. I'm not talking your souped up Pentium 200 with 128MB of ram in it. But, even those will roll over and die if you try to bring up a desktop like gnome or KDE on them. Way way too slow. Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 21:52:50 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 397A016A49C for ; Sat, 3 Jun 2006 21:52:50 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 675A643D55 for ; Sat, 3 Jun 2006 21:52:49 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53Lqgx46455; Sat, 3 Jun 2006 14:52:42 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Scott Hiemstra" , "'FreeBSD-Questions Questions'" Date: Sat, 3 Jun 2006 14:52:42 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060602151122.B087043D5D@mx1.FreeBSD.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 21:52:58 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Scott Hiemstra >Sent: Friday, June 02, 2006 8:14 AM >To: 'FreeBSD-Questions Questions' >Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? > > >> I run FreeBSD 4.11 stable, and I need to replace my ASUS K8V Deluxe >> motherboard. I am thinking about de K8V-X SE. However, >> instead of the 8237 >> chipset, it has the 8237R. Is that supported in FreeBSD 4.11 stable as >> well? Also, instead of the Gigabyte LAN, it has a Realtek >> 8201CL D version >> LAN. Will that work, too? I can, for the life of me, no >> longer find a link >> on the new FreeBSD site (like >> http://www.freebsd.org/releases/4.11-STABLE/hardware-i386.html >> #DISK, for >> instance). If anyone could tell me where the page is at, or knows the >> answer, I'd really appreciate it. > > >I have the same board in a server running 4.11 (FreeBSD >4.11-STABLE #0) and >no problems to report. The nic is detected as "RealTek >8129/8139" Those are crap cards. Lots of problems under even other operating systems and those cards and non-autonegotiation hubs and switches. They seem to negotiate OK if they are plugged into a 10/100 autoswitching switch, but they are not that efficient. If your server isn't doing a lot of network traffic they will work but I'd avoid using them in a file and print server most definitely. Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:05:08 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1C6AE16A603 for ; Sat, 3 Jun 2006 22:05:08 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8C24D43D46 for ; Sat, 3 Jun 2006 22:05:07 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53M52x46503; Sat, 3 Jun 2006 15:05:03 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Scott Hiemstra" , "'FreeBSD-Questions Questions'" Date: Sat, 3 Jun 2006 15:05:02 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060602161729.5873543D45@mx1.FreeBSD.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:05:13 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Scott Hiemstra >Sent: Friday, June 02, 2006 9:20 AM >To: 'FreeBSD-Questions Questions' >Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? > >notice this thread is in reference to swapping a MB for another MB and >coments like yours are not appreciated. > > >Please notice I never said what the box was doing nor did I ask for your >opinion of what MB/NIC I use in my systems. Makes no difference, he has as much right to sound off as you do as long as he sounds off on FreeBSD or a directly related topic. This is a public forum. If you don't like a post, delete it. As I've said before on this mailing list, freebsd-questions is a public mailing list that is FREE support. You don't "have it your way" you "have it the responders way" If you can shuck some pearls out of the oyster bed here, your doing better than most, but you have no right to urinate all over the oyster bed just because you don't find any pearls. If you want it "your way" I suggest you investigate PAID support. There are plenty of people out there taking money for support, and they will give you the support any way you want, on as nice a silver platter and bed of roses and as polite as you want. > This SERVER is >purpose built >and runs stable 24/7 as a low volume outbound mail server so >the performance >of the NIC is not my primary concern. You have no need to justify what your doing to him or to me or to anybody. Why bother doing it. > Please keep your useless >comments to >yourself as they do nothing but waste disk space, CPU time and >the valuable >time of people who attempt to help others on this list. > His comments may be useless to you but not to everyone reading. You don't know what people are looking for when they google the archives or read this mailing list. If your mother read your response she would say "your just sinking to his level" and you need to keep that in perspective here. Of course, if my mother read my comments here she would say "speech is wasted on the deaf" and I should keep that in perspective, and I do, most of the time. Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:30:36 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B212416A47B for ; Sat, 3 Jun 2006 22:30:36 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id EDAB443D49 for ; Sat, 3 Jun 2006 22:30:35 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53MUVx46581; Sat, 3 Jun 2006 15:30:31 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Chuck Swiger" Date: Sat, 3 Jun 2006 15:30:31 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060602170819.68092.qmail@web33307.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: questions@freebsd.org Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:30:36 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Danial Thom >Sent: Friday, June 02, 2006 10:08 AM >To: Ted Mittelstaedt; Chuck Swiger >Cc: questions@freebsd.org >Subject: RE: Recommendation for 1000BASE-SX card? > > > > >--- Ted Mittelstaedt >wrote: > >> >> >> >-----Original Message----- >> >From: owner-freebsd-questions@freebsd.org >> >[mailto:owner-freebsd-questions@freebsd.org]On >> Behalf Of Chuck Swiger >> >Sent: Thursday, June 01, 2006 8:24 AM >> >To: danial_thom@yahoo.com >> >Cc: questions@freebsd.org >> >Subject: Re: Recommendation for 1000BASE-SX >> card? >> > >> >> > >> >Very well, let me put it another way: if your >> opinions about >> >what's wrong >> >differ from most other people, you might do >> better to rely on a >> >discussion >> >involving facts rather than opinions. >> >> Or, it could simply be that he's not doing what >> most people >> are doing, so he is going to run into trouble >> that most people >> don't run into. >> >> >I mention this because >> >some people >> >regard their own opinions so highly that they >> don't seem to be >> >aware that >> >other approaches exist and might even prove >> effective. >> > >> >> Like you? >> >> >> Clearly there are drivers that are well >> >> supported and drivers that aren't. There are >> >> people out there trying to run their >> businesses >> >> and you seem to want to pretend that >> everything >> >> is just peachy and that everything can be >> tweaked >> >> and tuned a bit to be usable. >> > >> >I don't know about either the OP or your >> situation(s), >> >> Then, pray tell, don't comment. Instead thank >> your lucky stars >> that you have not had to deal with that kind of >> problem. >> >> > but I'm >> >generally of >> >the opinion that FreeBSD works just fine, most >> of the time, on >> >most hardware, >> >without any specific tweaking or tuning to be >> entirely usable. >> > >> >> It does not. In reality, current versions of >> FreeBSD work better >> on current versions of hardware. FreeBSD has a >> terrible history >> of breaking things that used to work on old >> hardware, then >> when someone complains that something is >> broken, the developers >> in effect tell them their old hardware is >> crappy junk and to buy new >> hardware. >> >> Try running FreeBSD 6.X on a 80486 or Pentium >> system. FreeBSD 4.11 >> runs just fine on that hardware, if a bit >> slowly. But, I don't need >> speed to control my garden sprinklers. >> >> Now, it is true that sometimes backwards >> compatibility can hurt you, >> it can cause you to maintain interfaces and >> structures that conflict >> with support of new hardware, it can sometimes >> put you into >> situations that cannot be automatically >> resolved, thus you have to >> create a knob for the user to twaddle one way >> or another, depending >> on what hardware they have or what they want to >> do. It can suck >> off developer time to maintain old junk that >> only a few people use, >> instead of putting in support for new crap that >> a lot of people use. >> So there is a balance beam of too much >> backwards compatability >> and not enough of it. Microsoft is most >> definitely way far on the >> side of bending over backwards to support >> everything, but most people >> don't realize that FreeBSD is way far on the >> other side of sacrificing >> hardware support at the drop of a hat when >> people lose interest >> in it. >> >> >That's true of some other platforms, such as >> Apple hardware and >> >MacOS X, or >> >even Sun/SPARC boxes, as well. YMMV. >> > >> >> Total apples and oranges comparison, not >> relevant to anything. >> >> >If you have specific problems or a >> FreeBSD-driver to Windows-driver >> >performance comparison, providing #'s and >> enough details to >> >reproduce would be >> >helpful. >> >> That has been done with the Broadcom driver >> exhaustively in the >> PR database, there's at least a dozen PRs on >> problems related >> to that chip. However it has not resulted in >> much code to fix >> the problem, or even interest among committers >> to apply the fixes >> that have been posted. So no, I don't think >> that doing that >> is helpful at all. In fact, I really think the >> PR system has >> gotten pretty much broken these days, there's >> too many bugs and >> not enough people working on them, and more >> coming in every >> day. >> >> What is needed is some developers putting some >> time into >> knocking down the bugs in the PR database, but >> instead we have >> the foundation dumping money into funding >> students on projects >> like "The Summer of Code" which basically ends >> up creating a lot >> of half-finished efforts that may or may not >> eventually get >> integrated into the operating system at some >> point down the road. >> >> Nobody wants to fix other people's bugs, that's >> boring stuff, >> that is the one area of Open Source where >> commercial software >> companies have a leg up over us. A commercial >> company can find >> some starving programmer and pay him, then put >> a manager over him to >> keep jerking the paycheck string to keep him on >> task to do the >> icky programming. Open Source has real >> difficulty with the concept >> that some things in it are broken, rather >> ickely broken, and >> totally un-fun to work on, and the only way >> your going to get >> them fixed is by whipping some slave until they >> do the filthy >> task. People would rather spend the gold that >> they have on >> nice, pleasant projects that treat everyone >> nicely and look good >> on Resumes, and are not icky, nasty, >> uncomfortable things to >> do that make you late for dinner. >> >> Ted >> > >What's going on Ted, have you jumped ship since I >last came up for air? :) > Naw, once you got the meds right, you started making more sense. ;-) >Its easy enough for commercial companies to fix >the bugs if they need to use the broadcom >drivers. There's just little incentive to donate >the code back with this bunch of rude, >incompetent clowns that have become the FreeBSD >micky mouse club. I don't think it's that being the problem. I think the problem is that the engineers at places like HP and ASUS and such, know perfectly well the Broadcom and the Realtek and the other cheapo-crappy ethernet chipsets are garbage. But, I think they figure that they are not going to throw expensive programming time on solving the problems of those chips in software. I think they spend the expensive programming time on their high-end gear, which has the Intel chipset and the other good stuff, high end parts in it. There was a time when name brand companies like Dell, HP Gateway, Micron, etc. etc. made 2 lines of computers. Cheapo crappy desktop gear, and expensive high quality server gear. What I think ruined it is too many people pressing cheapo crappy desktop gear into use as servers, it was cutting into the high-end server market in a big way. So, the Dell's and the HP's of the world realized they needed to create server lines (and the motherboard manufacturers realized this too with motherboard lines) that were marketed as servers, but were a lot cheaper than their high end servers. This would allow them to package the exact same crappy desktop parts in a box marked as a "server" and costing twice as much, yet not as much as the really good quality server gear. And so that is what is going on these days. The really high end gear, which is rapidly vanishing, the motherboard and box vendors are still putting time into work on drivers and such. But, for the low end gear they are just buying commodity chipsets, and they are telling those commodity vendors (like realtek) that they simply won't buy their stuff unless the chip comes with drivers. So, the commodity vendors slap together the minimum effort needed to get the chip and software driver out the door, and the motherboard and box vendors simply take the driver source and replace "Realtek" with "HP" and sometimes they don't even bother to do even that much. And if the driver has some bug in it that is intermittent, well who cares, the Windows users will just blame it on a virus or something, as long as the bug is infrequent enough that the user does not return the hardware to the dealer. >There was a time when you could >discuss an issue with Matt, Mike and Terry and >hammer out a solution. Now you've got a bunch of >gaming jockeys who know as much about hardware as >my Mom. And that ain't much, sadly. > The situation is analogous to the auto manufacturing market in a great many ways. Over the last 15 years computer manufacturing has really grown up until it's just like auto manufacturing today. We no longer have some of the really horrible gear out there like the 80486 50Mhz chips and their associated support chips that would lock up for no reason at least 6 times a day. But, we also no longer have some really cool and amazing gear like the NetFrames which most people didn't understand how good they were because they were so figging expensive. Today, everyone has the cost/benefit calculators out and is cutting every corner in the book. Need a server? Well the rack mounted stuff is an extra $50 so we will just set up some card tables and get minitowers. Need a UPS? Well that there 300VA unit with the itty-bitty-titty-batteries in it that has a runtime of 5 minutes on a good day will shut the server down without scratching it's disks, so lets buy that instead of that APC 600VA unit with the extra batteries that has a 4 hour runtime and a network card in it to where you can plan for battery change out in advance. And that's just the end users, the manufacturers are doing the same thing. This is exactly the reason that Microsoft has slipped their new Windows version. They are waiting for the cheapo crap hardware to catch up. Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:35:35 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D15C216A484 for ; Sat, 3 Jun 2006 22:35:35 +0000 (UTC) (envelope-from alive@dienub.org) Received: from pfepa.post.tele.dk (pfepa.post.tele.dk [195.41.46.235]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6E4BA43D49 for ; Sat, 3 Jun 2006 22:35:35 +0000 (GMT) (envelope-from alive@dienub.org) Received: from m00h.dienub.org (dienub.org [87.49.144.133]) by pfepa.post.tele.dk (Postfix) with ESMTP id CE45DFAC02E; Sun, 4 Jun 2006 00:35:33 +0200 (CEST) Received: from mail.dienub.org (localhost [127.0.0.1]) by m00h.dienub.org (Postfix) with ESMTP id 708CB1CC0C; Sun, 4 Jun 2006 00:35:33 +0200 (CEST) Received: from 83.92.78.110 (SquirrelMail authenticated user alive) by mail.dienub.org with HTTP; Sun, 4 Jun 2006 00:35:33 +0200 (CEST) Message-ID: <1840.83.92.78.110.1149374133.squirrel@mail.dienub.org> In-Reply-To: <7.0.1.0.2.20060603225657.020a0a98@broadpark.no> References: <7.0.1.0.2.20060603225657.020a0a98@broadpark.no> Date: Sun, 4 Jun 2006 00:35:33 +0200 (CEST) From: "Daniel A. Akulenok" To: "Kyrre Nygard" User-Agent: SquirrelMail/1.4.6 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal Cc: questions@freebsd.org Subject: Re: Hiding dot files with ftpd X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:35:35 -0000 On Sat, June 3, 2006 22:57, Kyrre Nygard wrote: > > What's up all? > > Just wondering if it's possible to hide dot files somehow > with FreeBSD's default ftpd when I invoke it from inetd? > > ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l > ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l > > Thanks, > Kyrre > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > Hi Kyrre, Files prepended with dots in UNIX operating systems usually symoblize a file which is not shown to the user on a regular basis because the user will actually not _need_ to know of it's prescense in daily use. Therefore, it is entirely up to the FTP client of the user if files prepended with dots are shown or not. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:41:49 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6360016A474 for ; Sat, 3 Jun 2006 22:41:49 +0000 (UTC) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 14DF543D46 for ; Sat, 3 Jun 2006 22:41:49 +0000 (GMT) (envelope-from jerrymc@clunix.cl.msu.edu) Received: from clunix.cl.msu.edu (localhost [127.0.0.1]) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6) with ESMTP id k53MflBU019231; Sat, 3 Jun 2006 18:41:47 -0400 (EDT) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.13.6+Sun/8.13.6/Submit) id k53MflxO019230; Sat, 3 Jun 2006 18:41:47 -0400 (EDT) From: Jerry McAllister Message-Id: <200606032241.k53MflxO019230@clunix.cl.msu.edu> To: tedm@toybox.placo.com (Ted Mittelstaedt) Date: Sat, 3 Jun 2006 18:41:47 -0400 (EDT) In-Reply-To: X-Mailer: ELM [version 2.5 PL7] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Scott Hiemstra , 'FreeBSD-Questions Questions' Subject: Re: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:41:49 -0000 > > >notice this thread is in reference to swapping a MB for another MB and > >coments like yours are not appreciated. > > > > > >Please notice I never said what the box was doing nor did I ask for your > >opinion of what MB/NIC I use in my systems. > > Makes no difference, he has as much right to sound off as you do > as long as he sounds off on FreeBSD or a directly related topic. This > is a public forum. If you don't like a post, delete it. So, I guess that means that the original poster can spout off and say that the response contained irrelevant and offensive material if he wants as well. Getting those types of responses is one way that persons (at least some of them who have sufficient perception) learn how to make appropriate and meaningful responses. > As I've said before on this mailing list, freebsd-questions is a public > mailing list that is FREE support. You don't "have it your way" you > "have it the responders way" And the original poster subsequently became a responder. > If you can shuck some pearls out of the oyster bed here, your doing > better than most, but you have no right to urinate all over the oyster > bed just because you don't find any pearls. Wow, I am stunned. > If you want it "your way" I suggest you investigate PAID support. There > are plenty of people out there taking money for support, and they will > give you the support any way you want, on as nice a silver platter and > bed of roses and as polite as you want. Pecuniary reward is not the only reason to learn how to make reasonable, meaningful responses that are to the point of the question and to be able to understand the difference. Being able to post responses that are respected in the community is another reward and may occasionally require learning from peoples comments on the quality of the responses. ////jerry > > > This SERVER is > >purpose built > >and runs stable 24/7 as a low volume outbound mail server so > >the performance > >of the NIC is not my primary concern. > > You have no need to justify what your doing to him or to me or to > anybody. > Why bother doing it. > > > Please keep your useless > >comments to > >yourself as they do nothing but waste disk space, CPU time and > >the valuable > >time of people who attempt to help others on this list. > > > > His comments may be useless to you but not to everyone reading. > You don't know what people are looking for when they google the > archives or read this mailing list. If your mother read your response > she would say "your just sinking to his level" and you need to > keep that in perspective here. Of course, if my mother read my comments > here she would say "speech is wasted on the deaf" and I should keep > that in perspective, and I do, most of the time. > > Ted > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:48:10 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A3C0016A46F for ; Sat, 3 Jun 2006 22:48:10 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33314.mail.mud.yahoo.com (web33314.mail.mud.yahoo.com [68.142.206.129]) by mx1.FreeBSD.org (Postfix) with SMTP id 454B743D45 for ; Sat, 3 Jun 2006 22:48:10 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 19277 invoked by uid 60001); 3 Jun 2006 22:48:06 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=Hz5U+BwMiuy4RU/rmlqGXVlq9Ftpu466LcPcOrYKoAVxSIKsbRB4ndoRlJ+ZK/x0khRVYpOVAq0+Z4W0y7O1GprNGNOFBFPtpcNDK1nMNHJxzHKB+judWH1pAZKxI0QI3gIBkBPagyUWYKChP5/QifydEd8ChEUQSNULxecV1qY= ; Message-ID: <20060603224806.19275.qmail@web33314.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33314.mail.mud.yahoo.com via HTTP; Sat, 03 Jun 2006 15:48:06 PDT Date: Sat, 3 Jun 2006 15:48:06 -0700 (PDT) From: Danial Thom To: Ted Mittelstaedt In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: questions@freebsd.org Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:48:10 -0000 >Its easy enough for commercial companies to fix >the bugs if they need to use the broadcom >drivers. There's just little incentive to donate >the code back with this bunch of rude, >incompetent clowns that have become the FreeBSD >micky mouse club. I don't think it's that being the problem. I think the problem is that the engineers at places like HP and ASUS and such, know perfectly well the Broadcom and the Realtek and the other cheapo-crappy ethernet chipsets are garbage. But, I think they figure that they are not going to throw expensive programming time on solving the problems of those chips in software. I think they spend the expensive programming time on their high-end gear, which has the Intel chipset and the other good stuff, high end parts in it. There was a time when name brand companies like Dell, HP Gateway, Micron, etc. etc. made 2 lines of computers. Cheapo crappy desktop gear, and expensive high quality server gear. What I think ruined it is too many people pressing cheapo crappy desktop gear into use as servers, it was cutting into the high-end server market in a big way. So, the Dell's and the HP's of the world realized they needed to create server lines (and the motherboard manufacturers realized this too with motherboard lines) that were marketed as servers, but were a lot cheaper than their high end servers. This would allow them to package the exact same crappy desktop parts in a box marked as a "server" and costing twice as much, yet not as much as the really good quality server gear. And so that is what is going on these days. ______________________________ Ok, well we've blown the yahoo buffer so I have to crop. I'm not sure that its those corporate monsters making a conscious effort to rip people off. The market is uneducated. Managers at those companies don't know anything, and the engineers that design MBs are asian robots that just do schematics and make the chips work. People selecting products today are not engineers and have no idea now to test hardware; heck even Matt Dillon admits that he doesn't understand how the PCI bus works, and he's trying to design an operating system. Doesn't care either. Its all about the CPU. Which is silly, since putting a big, honking CPU on a box with a bad chipset or a cheap NIC devalues the CPU to the point that you might as well just get something cheap. Virtually no-one has any clue about the performance of their box. People are willing to spend any amount on their MB and CPU, and they they'll go out and buy a realtek ethernet card, or a 32-bit gig card to save a few $$$. Its mindless. Its so mindless I can't believe it. And even if you explain it to them, they still don't understand. Its like a bunch of women buying clothes. Costs more, must be better. Its just crazy. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:48:11 2006 Return-Path: X-Original-To: freebsd-questions@FreeBSD.org Delivered-To: freebsd-questions@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5440D16A473 for ; Sat, 3 Jun 2006 22:48:11 +0000 (UTC) (envelope-from solsyst@netscape.net) Received: from smtp.mho.com (smtp.mho.net [64.58.4.5]) by mx1.FreeBSD.org (Postfix) with SMTP id B60D643D46 for ; Sat, 3 Jun 2006 22:48:10 +0000 (GMT) (envelope-from solsyst@netscape.net) Received: (qmail 78907 invoked by uid 1002); 3 Jun 2006 22:48:06 -0000 Received: from dialup-208-157-46-121.mho.net (HELO ?208.157.46.121?) (208.157.46.121) by smtp.mho.net with SMTP; 3 Jun 2006 22:48:06 -0000 Message-ID: <4481BD9C.60702@netscape.net> Date: Sat, 03 Jun 2006 16:49:33 +0000 From: RAW User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.12) Gecko/20051013 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: glewis@FreeBSD.org Subject: Makefile for rpm-4.0.4_4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:48:11 -0000 This question is about a FreeBSD port that I cannot automake. Dear FreeBSDers; Tried to obtain, make and install Port rpm-4.0.4_4, on my new FreeBSD 6.0. Not there yet Looks like the Makefile program got down to "post-patch:", became unhappy, informed me with error code 127, (???) and quit.Make claimed that it could not find the shell script "configure" (see log below), but when I follow the path to the file, there it is. It left an "extract done.rpm-4" doc empty. How can I get the makefile to continue, find "configure" and finish the make job? P.S. I ran Make in a terminal window on my KDE desktop. Matters? Thanks for the help. Make log: /usr/rpm/rpm4 # make install clean ===> Vulnerability check disabled, database not found => rpm-4.0.4.tar.gz doesn't seem to exist in /usr/ports/distfiles/. => Attempting to fetch from ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/. fetch: ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/rpm-4.0.4.tar.gz: File unavailable (e.g., file not found, no access) => Attempting to fetch from ftp://ftp.mirrorservice.org/sites/ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/. rpm-4.0.4.tar.gz 100% of 5728 kB 2370 Bps 00m00s ===> Extracting for rpm-4.0.4_4 => Checksum OK for rpm-4.0.4.tar.gz. ===> Patching for rpm-4.0.4_4 ===> Applying FreeBSD patches for rpm-4.0.4_4 -e 's:%%LOCALBASE%%:/usr/local:' /usr/rpm/rpm4/work/rpm-4.0.4/configure /usr/rpm/rpm4/work/rpm-4.0.4/beecrypt/configure -e: not found *** Error code 127 Stop in /usr/rpm/rpm4. From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:49:42 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9F36C16A4EA for ; Sat, 3 Jun 2006 22:49:42 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33305.mail.mud.yahoo.com (web33305.mail.mud.yahoo.com [68.142.206.120]) by mx1.FreeBSD.org (Postfix) with SMTP id 8D5EA43D5E for ; Sat, 3 Jun 2006 22:49:18 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 52867 invoked by uid 60001); 3 Jun 2006 22:49:17 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=AIjRW9q6XHOzvY4Cqz0XfqnQxwuma6/hMrjopFpFOJlX1s9e1xng5crfeOoiJ44y7/wF7470LoH4Fj8pQ0cqNRaK1HAHwg0TFcHut1ydPMPF9BOm5j1XPt1BQPPgG6BpN2V4Kq+XGnKw7pXej2aHG675jSb0YbSOtVwUG3BOwhE= ; Message-ID: <20060603224917.52865.qmail@web33305.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33305.mail.mud.yahoo.com via HTTP; Sat, 03 Jun 2006 15:49:17 PDT Date: Sat, 3 Jun 2006 15:49:17 -0700 (PDT) From: Danial Thom To: Jerry McAllister , Ted Mittelstaedt In-Reply-To: <200606032241.k53MflxO019230@clunix.cl.msu.edu> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Scott Hiemstra , 'FreeBSD-Questions Questions' Subject: Re: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:49:42 -0000 Jerry, old buddy. what up? :) __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 22:55:36 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D52A516A50A for ; Sat, 3 Jun 2006 22:55:36 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 47FE243D49 for ; Sat, 3 Jun 2006 22:55:36 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53MtTx46707; Sat, 3 Jun 2006 15:55:29 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Heinrich Rebehn" , Date: Sat, 3 Jun 2006 15:55:29 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060602175851.12924.qmail@web33310.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 22:55:37 -0000 >-----Original Message----- >From: Danial Thom [mailto:danial_thom@yahoo.com] >Sent: Friday, June 02, 2006 10:59 AM >To: Ted Mittelstaedt; Heinrich Rebehn; questions@freebsd.org >Subject: RE: Recommendation for 1000BASE-SX card? > > > > >--- Ted Mittelstaedt >wrote: > >> >> >> >-----Original Message----- >> >From: owner-freebsd-questions@freebsd.org >> >[mailto:owner-freebsd-questions@freebsd.org]On >> Behalf Of Danial Thom >> >Sent: Thursday, June 01, 2006 6:38 AM >> >To: Heinrich Rebehn; questions@freebsd.org >> >Subject: Re: Recommendation for 1000BASE-SX >> card? >> > >> > >> > >> > >> >--- Heinrich Rebehn >> >wrote: >> > >> >> Danial Thom wrote: >> >> > The intel cards that use the EM driver >> are >> >> the >> >> > best performing cards in FreeBSD that >> we've >> >> > tested. We've test cards made by the same >> >> company >> >> > that use the broadcom controllers and the >> >> intel >> >> > cards are substantially better (ie use >> less >> >> CPU >> >> > passing the same amount of traffic). >> >> > >> >> > Be careful using on-board controllers. >> >> Usually >> >> > vendors, for some reason, don't wire them >> to >> >> the >> >> > pci-x bus. Most supermicro boards wire the >> em >> >> > controllers to the 32bit/33mhz bus and the >> >> tyan >> >> > and supermicro opteron boards we've tested >> >> wire >> >> > the broadcoms to a shared 1x PCI-E, both >> of >> >> which >> >> > will not only give you poor performance, >> but >> >> are >> >> > not capable of running full gigabit rates. >> >> > >> >> > DT >> >> > >> >> >> >> The Intel card would be an INTEL Pro1000MF, >> >> right? This would be quite >> >> expensive (~ EUR 430), but good performance >> and >> >> stability would warrant >> >> that. >> >> ATM, we are using the onboard controller >> >> (Broadcom BCM5704C wired to the >> >> pci-x bus). I did not have opportunity to do >> >> performance measurements, >> >> but we do have problems with our Linkpro >> >> 1000SX/1000TX converters, the >> >> 3rd of which has already died. >> >> That's why i want to give a PCI-X card with >> >> fiber interface a try. >> > >> >No, that would be the 1000MT, the MF is a >> fiber >> >card I believe. They are about US$120. in the >> US. >> > >> >How do you know its wired to the PCI-X bus, >> since >> >I don't believe that the controller has a way >> of >> >reporting the way that the intel controller >> does? >> >What MB do you have? >> > >> >Also keep in mind that the bge driver is a >> piece >> >of crap; driver quality is a much more telling >> >factor in these free OS's than the card in >> many >> >cases. The EM and FXP are the only drivers >> worth >> >anything (mainly because neither were written >> by >> >mass-driver mill man Bill Paul). >> > >> >> After having fixed bugs in the bge driver I >> must stress >> how wrong this statement is for the bge driver. >> Bill >> Paul may or may not have been associated with >> the bge driver, >> whether he was or not is immaterial since the >> bge driver is >> basically a port of the broadcom-supplied Linux >> driver, >> the code is Broadcoms mostly, with hunks of >> Broadcom >> code removed (like that dealing with the PHY's) >> when it >> was too difficult to port. (apparently) The >> quality of >> the Broadcom driver isn't Bill Paul's, it's >> Broadcoms. >> >> No, I can assure you that the reason the >> Broadcom >> chips work like crap under FreeBSD is not due >> to Bill Paul, >> it is because the Broadcom hardware iteself is >> pure, unadulterated, >> stinking, bull crap. It is crappy even under >> the supported operating >> systems like Windows, it's craptitude reaches >> new heights on >> the crap pile. Broadcom missed their calling >> as an ethernet >> chipset designer, they should have gone into >> making vacuum >> cleaners, as they would certainly be the >> suckiest ones in >> that business. >> >> Ted > >I'll disagree with you on the authoring issue >(without commenting on the crappiness of the >controller), because it is ultimately the >responsibility of the programmer to work around >the quirks and even the bugs in any given >controller, and the simple fact is that BP does a >half-assed job; certainly not the kind of job >someone whose sole responsibility was to maintain >a particular driver. All complex controllers are >a b*tch to write drivers for, and the ability to >seemlessly integrate working code into the OS to >mask the quirks is what separates the men from >the boys. Saying the driver stinks because the >example code stinks is a cop-out. But I didn't say that. I said the driver stinks because the HARDWARE stinks. When I can take a Windows box with a Broadcom chip in it, that is exhibiting timeouts and slowness, unplug it from one brand of 10BaseT hub, and plug it into another brand of 10BaseT hub, and then plug my laptop into the first hub port that the Windows box was in, and have absolutely no problems, and have the Broadcom Windows box work perfectly in the second brand of hub, that is crappy hardware. It is not drivers, and no amount of twaddling with code in the driver will fix it. >All sample code >stinks. The sample code should be just that; an >example of how to program the controller. Absolutely no, not at all. It is very easy to write a sample driver source that is full of unexplained magic numbers, in fact the Broadcom driver that I tweaked was broken precisely because one of the prior FreeBSD programmers who obviously didn't understand teh first thing about bit mathmatics, had gone in and replaced a bunch of magic numbers with what he thought was their equivalents, in binary formulas. Looking at it I know exactly what he was trying to do, he had broken the magic numbers down to binary, seen what appeared to be some pattern similaries between them, tried to write some bit formulas that would generate the same magic numbers. In short he was assuming the magic numbers actually followed some logic for the different chips. This was a wrong assumption, and he didn't even do the math right. I spent 4 hours figuring out what he had been trying to do, and an hour chopping it out when I finally figured out what he was trying to do, then figured out that it wasn't calculating correctly anyway. I could have corrected his binary formulas, but then it would just make the driver harder to maintain since it would no longer match the Linux driver in that section. The chip datasheets are supposed to tell you how to program the controller. And in this case, the Broadcom-supplied Linux driver that was used as a template is the -offically supported- driver from Broadcom for Linux, it is not a sample driver that came in a device drivers kit. >Taking >example code and forcing it into a driver results >in a garbage driver. > I will agree with this, there is plenty of that that does happen. Not in this case, but yes, it does happen. >Which is also why the strategy of hiring some >"starving programmer" is not a viable >option,since the talent of the programmer is >directly proportiate to the quality of the >finished driver. The margin between marginal >programmers (guys that can get something done >that "works") and a superior programmer is very >large. We're not talking about welders here. >There could be a 50% performance difference >between 2 drivers for the same controller written >by programmers with different talent levels. A >couple of fewer or more efficient I/Os, a better >way to allocate memory, how you flip the rings; >all can make a tremendous difference, >particularly when you get to the 100K+ iterations >per second levels of traffic. > The "starving programmer" was an exaggeration used to illustrate a point, I was not seriously suggesting to go out and hire a bad programmer. But, when you buy cheap crappy hardware it is cheap because the manufacturer has hired less talented programmers among other things, and you can only expect something that "works" not that "works well" Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:09:13 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3446216A484 for ; Sat, 3 Jun 2006 23:09:13 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id C395643D45 for ; Sat, 3 Jun 2006 23:09:12 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53N9Cx46786 for ; Sat, 3 Jun 2006 16:09:12 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: Date: Sat, 3 Jun 2006 16:09:12 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <52d917a60606022037w24db6b8aod2b0a654e8132c4f@mail.gmail.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Subject: RE: porno site using old devil logo...thought you should know X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:09:13 -0000 >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of surfbass >Sent: Friday, June 02, 2006 8:37 PM >To: freebsd-questions@freebsd.org >Subject: porno site using old devil logo...thought you should know > > >Thought you might like to know, but keep my email anonymous >please; I trust >you guys enough that i dont need to spoof it. I know I wouldn't >want a logo >for such a fine product associated with a porno site. > >http://www.celebritytemptation.com/images/11frontpageimages/devil.jpg > But, where's the porno on that site? Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:11:15 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2CF3716A4FA for ; Sat, 3 Jun 2006 23:11:15 +0000 (UTC) (envelope-from chad@shire.net) Received: from hobbiton.shire.net (mail.shire.net [166.70.252.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id DEAC943D4C for ; Sat, 3 Jun 2006 23:11:14 +0000 (GMT) (envelope-from chad@shire.net) Received: from [67.171.127.191] (helo=[192.168.99.68]) by hobbiton.shire.net with esmtpa (Exim 4.51) id 1FmfH0-0000Up-3F; Sat, 03 Jun 2006 17:11:14 -0600 In-Reply-To: References: Mime-Version: 1.0 (Apple Message framework v750) X-Priority: 3 (Normal) Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Message-Id: <60AAD6C6-FA04-4558-A4F9-B97AF1F79A44@shire.net> Content-Transfer-Encoding: 7bit From: "Chad Leigh -- Shire.Net LLC" Date: Sat, 3 Jun 2006 17:11:13 -0600 To: Ted Mittelstaedt X-Mailer: Apple Mail (2.750) X-SA-Exim-Connect-IP: 67.171.127.191 X-SA-Exim-Mail-From: chad@shire.net X-SA-Exim-Scanned: No (on hobbiton.shire.net); SAEximRunCond expanded to false Cc: freebsd-questions@freebsd.org Subject: Re: porno site using old devil logo...thought you should know X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:11:15 -0000 On Jun 3, 2006, at 5:09 PM, Ted Mittelstaedt wrote: > > >> -----Original Message----- >> From: owner-freebsd-questions@freebsd.org >> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of surfbass >> Sent: Friday, June 02, 2006 8:37 PM >> To: freebsd-questions@freebsd.org >> Subject: porno site using old devil logo...thought you should know >> >> >> Thought you might like to know, but keep my email anonymous >> please; I trust >> you guys enough that i dont need to spoof it. I know I wouldn't >> want a logo >> for such a fine product associated with a porno site. >> >> http://www.celebritytemptation.com/images/11frontpageimages/devil.jpg >> > > But, where's the porno on that site? strip everything from images on down to leave the root site and you will find it Chad > > Ted > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > unsubscribe@freebsd.org" --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:25:49 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4FB6716A4D1 for ; Sat, 3 Jun 2006 23:25:49 +0000 (UTC) (envelope-from danial_thom@yahoo.com) Received: from web33308.mail.mud.yahoo.com (web33308.mail.mud.yahoo.com [68.142.206.123]) by mx1.FreeBSD.org (Postfix) with SMTP id DAD0143D48 for ; Sat, 3 Jun 2006 23:25:48 +0000 (GMT) (envelope-from danial_thom@yahoo.com) Received: (qmail 86467 invoked by uid 60001); 3 Jun 2006 23:25:48 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=k0Jhoj7hMJm+cbwzUs4r3mB2dr3r28U1TV7gg4umSI07uwzIC7brsV+c+vT7/MbahKxpzAMcnQgZ6vMhKc25QOSUlC+ZKmwcR5quWnY4XCah5mZDAj/TESfMUINkWID5/D9LdfMxQNrp0P2PRyDydkio6NWeTl4riTh0P9WF0ls= ; Message-ID: <20060603232548.86465.qmail@web33308.mail.mud.yahoo.com> Received: from [65.34.182.15] by web33308.mail.mud.yahoo.com via HTTP; Sat, 03 Jun 2006 16:25:48 PDT Date: Sat, 3 Jun 2006 16:25:48 -0700 (PDT) From: Danial Thom To: Ted Mittelstaedt , Heinrich Rebehn , questions@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: danial_thom@yahoo.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:25:49 -0000 The "starving programmer" was an exaggeration used to illustrate a point, I was not seriously suggesting to go out and hire a bad programmer. But, when you buy cheap crappy hardware it is cheap because the manufacturer has hired less talented programmers among other things, and you can only expect something that "works" not that "works well" ---------------------------------- I think its often difficult to distinguish between what is crappy, because good code can make bad hardware look good and vice versa. All ethernet controllers were designed by idiots. My first success story (now I don't want to let on to who I really am so I'll be vague), was an ISA card by a major vendor that locked up regularly, and it had a hideous reputation as being a bad card. It was the only card of its kind, and I needed it badly. They gave me schematics and said that they had tried and tried but couldn't find anything wrong with the card. They had contracted out to some brainfarm to write a driver, and the thing was this beautiful self-contained scheduler (this is like MSDOS 3 mind you) with documented source, the whole deal. Well I tore it apart, simplified the code, got rid of all the soft interrupt passes and cleaned up all the memory management code. Now the card worked like a charm, didn't lock up, ran better than their spec and Mega-Billon$- company couldn't believe that some 23yo kid wrote a driver that a company they paid 100K to couldn't get to work. My point is that until someone writes a really good driver you never know if hardware is any good or not. Now some hardware is hopeless. I'm not sure that the broadcom controllers are that hopeless. But since the intel cards work well and are cheap, who's going to spend the time to pour over the broadcom driver and make it better? There's a ton of I/Os in there that can be streamlined. But who's gonna do it? Its sure not worth my time. DT __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:33:35 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D629716A558 for ; Sat, 3 Jun 2006 23:33:35 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5654E43D49 for ; Sat, 3 Jun 2006 23:33:35 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53NXKx46961; Sat, 3 Jun 2006 16:33:20 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Jerry McAllister" Date: Sat, 3 Jun 2006 16:33:20 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <200606032241.k53MflxO019230@clunix.cl.msu.edu> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Scott Hiemstra , 'FreeBSD-Questions Questions' Subject: RE: Does FreeBSD 4.11-STABLE support the 8237R? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:33:36 -0000 >-----Original Message----- >From: Jerry McAllister [mailto:jerrymc@clunix.cl.msu.edu] >Sent: Saturday, June 03, 2006 3:42 PM >To: Ted Mittelstaedt >Cc: Scott Hiemstra; 'FreeBSD-Questions Questions' >Subject: Re: Does FreeBSD 4.11-STABLE support the 8237R? > > >> >> >notice this thread is in reference to swapping a MB for >another MB and >> >coments like yours are not appreciated. >> > >> > >> >Please notice I never said what the box was doing nor did I >ask for your >> >opinion of what MB/NIC I use in my systems. >> >> Makes no difference, he has as much right to sound off as you do >> as long as he sounds off on FreeBSD or a directly related topic. This >> is a public forum. If you don't like a post, delete it. > >So, I guess that means that the original poster can spout off >and say that >the response contained irrelevant and offensive material if he >wants as well. Yes, he can. Not a problem as long as he knows that his spouting is being done for his own enjoyment, not because he seriously thinks that he's right. From my vantage point, it sounded like the OP was really believing what he was saying. >Getting those types of responses is one way that persons (at >least some of >them who have sufficient perception) learn how to make appropriate and >meaningful responses. > appropriate and meaningful responses are in the eye of the beholder as I already explained. Too bad you missed that. >> As I've said before on this mailing list, freebsd-questions >is a public >> mailing list that is FREE support. You don't "have it your way" you >> "have it the responders way" > >And the original poster subsequently became a responder. > See above. Then look up the definition of "metadiscussion" > >Pecuniary reward is not the only reason to learn how to make reasonable, >meaningful responses that are to the point of the question and to be >able to understand the difference. Being able to post responses that >are respected in the community is another reward and may occasionally >require learning from peoples comments on the quality of the responses. > Yup, I really need that totally unverifyable, most likely fake pen name of mine to be respected in the community. :-) Wow, someone might even think I'm a man, rather than the sweet, nubile, available, and very hetrosexual 22 year old co-ed that I really am ;-) Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:35:03 2006 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9A75516A503 for ; Sat, 3 Jun 2006 23:35:03 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 79B7343D4C for ; Sat, 3 Jun 2006 23:35:02 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53NYxx46972; Sat, 3 Jun 2006 16:34:59 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: "Chad Leigh -- Shire.Net LLC" Date: Sat, 3 Jun 2006 16:34:59 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1250" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <60AAD6C6-FA04-4558-A4F9-B97AF1F79A44@shire.net> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: freebsd-questions@freebsd.org Subject: RE: porno site using old devil logo...thought you should know X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:35:04 -0000 >-----Original Message----- >From: Chad Leigh -- Shire.Net LLC [mailto:chad@shire.net] >Sent: Saturday, June 03, 2006 4:11 PM >To: Ted Mittelstaedt >Cc: freebsd-questions@freebsd.org >Subject: Re: porno site using old devil logo...thought you should know > > > >On Jun 3, 2006, at 5:09 PM, Ted Mittelstaedt wrote: > >> >> >>> -----Original Message----- >>> From: owner-freebsd-questions@freebsd.org >>> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of surfbass >>> Sent: Friday, June 02, 2006 8:37 PM >>> To: freebsd-questions@freebsd.org >>> Subject: porno site using old devil logo...thought you should know >>> >>> >>> Thought you might like to know, but keep my email anonymous >>> please; I trust >>> you guys enough that i dont need to spoof it. I know I wouldn't >>> want a logo >>> for such a fine product associated with a porno site. >>> >>> http://www.celebritytemptation.com/images/11frontpageimages/devil.jpg >>> >> >> But, where's the porno on that site? > >strip everything from images on down to leave the root site and you >will find it > Yup, another site that doesen't understand how to turn off directory browsing. It ain't porno if they don't have their pants off. Ted From owner-freebsd-questions@FreeBSD.ORG Sat Jun 3 23:39:23 2006 Return-Path: X-Original-To: questions@freebsd.org Delivered-To: freebsd-questions@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3231A16A583 for ; Sat, 3 Jun 2006 23:39:23 +0000 (UTC) (envelope-from tedm@toybox.placo.com) Received: from mail.freebsd-corp-net-guide.com (mail.web-strider.com [65.75.192.90]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0C42D43D4C for ; Sat, 3 Jun 2006 23:39:22 +0000 (GMT) (envelope-from tedm@toybox.placo.com) Received: from tedwin2k (nat-rtr.freebsd-corp-net-guide.com [65.75.197.130]) by mail.freebsd-corp-net-guide.com (8.11.1/8.11.1) with SMTP id k53NdHx47012; Sat, 3 Jun 2006 16:39:18 -0700 (PDT) (envelope-from tedm@toybox.placo.com) From: "Ted Mittelstaedt" To: , "Heinrich Rebehn" , Date: Sat, 3 Jun 2006 16:39:17 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <20060603232548.86465.qmail@web33308.mail.mud.yahoo.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1807 Importance: Normal Cc: Subject: RE: Recommendation for 1000BASE-SX card? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Jun 2006 23:39:23 -0000 >-----Original Message----- >From: Danial Thom [mailto:danial_thom@yahoo.com] >Sent: Saturday, June 03, 2006 4:26 PM >To: Ted Mittelstaedt; Heinrich Rebehn; questions@freebsd.org >Subject: RE: Recommendation for 1000BASE-SX card? > > >I think its often difficult to distinguish >between what is crappy, because good code can >make bad hardware look good and vice versa. All >ethernet controllers were designed by idiots. > >My first success story (now I don't want to let >on to who I really am so I'll be vague), was an >ISA card by a major vendor that locked up >regularly, and it had a hideous reputation as >being a bad card. It was the only card of its >kind, and I needed it badly. They gave me >schematics and said that they had tried and tried >but couldn't find anything wrong with the card. >They had contracted out to some brainfarm to >write a driver, and the thing was this beautiful >self-contained scheduler (this is like MSDOS 3 >mind you) with documented source, the whole deal. >Well I tore it apart, simplified the code, got >rid of all the soft interrupt passes and cleaned >up all the memory management code. Now the card >worked like a charm, didn't lock up, ran better >than their spec and Mega-Billon$- company >couldn't believe that some 23yo kid wrote a >driver that a company they paid 100K to couldn't >get to work. > Musta been one of those Intel SatisFAXion cards. ;-) >My point is that until someone writes a really >good driver you never know if hardware is any >good or not. Now some hardware is hopeless. I'm >not sure that the broadcom controllers are that >hopeless. But since the intel cards work well and >are cheap, who's going to spend the time to pour >over the broadcom driver and make it better? >There's a ton of I/Os in there that can be >streamlined. But who's gonna do it? Its sure not >worth my time. > Precisely!!