From owner-freebsd-scsi@FreeBSD.ORG Mon Feb 20 11:02:50 2006 Return-Path: X-Original-To: freebsd-scsi@freebsd.org Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5BB9716A420 for ; Mon, 20 Feb 2006 11:02:50 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 13F7543D46 for ; Mon, 20 Feb 2006 11:02:50 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (peter@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k1KB2ntb083701 for ; Mon, 20 Feb 2006 11:02:49 GMT (envelope-from owner-bugmaster@freebsd.org) Received: (from peter@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k1KB2m4s083695 for freebsd-scsi@freebsd.org; Mon, 20 Feb 2006 11:02:48 GMT (envelope-from owner-bugmaster@freebsd.org) Date: Mon, 20 Feb 2006 11:02:48 GMT Message-Id: <200602201102.k1KB2m4s083695@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: peter set sender to owner-bugmaster@freebsd.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 20 Feb 2006 11:02:50 -0000 Current FreeBSD problem reports Critical problems Serious problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2001/05/03] kern/27059 scsi [sym] SCSI subsystem hangs under heavy lo o [2001/06/29] kern/28508 scsi problems with backup to Tandberg SLR40 st o [2002/06/17] kern/39388 scsi ncr/sym drivers fail with 53c810 and more o [2002/07/22] kern/40895 scsi wierd kernel / device driver bug o [2003/05/24] kern/52638 scsi [panic] SCSI U320 on SMP server won't run s [2003/09/30] kern/57398 scsi [mly] Current fails to install on mly(4) o [2003/12/26] kern/60598 scsi wire down of scsi devices conflicts with o [2003/12/27] kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C81 s [2004/01/10] kern/61165 scsi [panic] kernel page fault after calling c o [2004/12/02] kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5 o [2005/06/04] kern/81887 scsi [aac] Adaptec SCSI 2130S aac0: GetDeviceP o [2005/12/12] kern/90282 scsi [sym] SCSI bus resets cause loss of ch de o [2006/02/04] kern/92798 scsi [ahc] SCSI problem with timeouts o [2006/02/10] kern/93128 scsi [sym] FreeBSD 6.1 BETA 1 has problems wit 14 problems total. Non-critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2000/12/06] kern/23314 scsi aic driver fails to detect Adaptec 1520B o [2002/02/23] kern/35234 scsi World access to /dev/pass? (for scanner) o [2002/06/02] kern/38828 scsi [feature request] DPT PM2012B/90 doesn't o [2002/10/29] kern/44587 scsi dev/dpt/dpt.h is missing defines required o [2005/01/12] kern/76178 scsi [ahd] Problem with ahd and large SCSI Rai 5 problems total. From owner-freebsd-scsi@FreeBSD.ORG Mon Feb 20 17:20:09 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 21CAB16A420; Mon, 20 Feb 2006 17:20:09 +0000 (GMT) (envelope-from gpalmer@freebsd.org) Received: from noop.colo.erols.net (noop.colo.erols.net [207.96.1.150]) by mx1.FreeBSD.org (Postfix) with ESMTP id B596043D46; Mon, 20 Feb 2006 17:20:08 +0000 (GMT) (envelope-from gpalmer@freebsd.org) Received: from uucp by noop.colo.erols.net with local-rmail (Exim 4.52 (FreeBSD)) id 1FBEhj-000MP4-VN; Mon, 20 Feb 2006 12:20:07 -0500 Received: from localhost.home.in-addr.com ([127.0.0.1]:60714) by rimmer.home.in-addr.com with esmtp (Exim 4.60 (FreeBSD)) (envelope-from ) id 1FBEYF-000EsI-CZ; Mon, 20 Feb 2006 17:10:19 +0000 Message-ID: <43F9F7FB.1000805@freebsd.org> Date: Mon, 20 Feb 2006 17:10:19 +0000 From: Gary Palmer User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.12) Gecko/20060203 X-Accept-Language: en-gb, en, en-us MIME-Version: 1.0 To: Joao Barros References: <2CEE6163475607F32A420FA1@jordgubbe.pingpong.net> <20060207121257.D53605@mgmt.uniserve.ca> <20060214150845.GB29569@in-addr.com> <20060214103146.K99735@mgmt.uniserve.ca> <70e8236f0602161437o1593c147na97239cf9054610e@mail.gmail.com> In-Reply-To: <70e8236f0602161437o1593c147na97239cf9054610e@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: scsi@freebsd.org Subject: Re: NAS w/ multipath X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 20 Feb 2006 17:20:09 -0000 Joao Barros wrote: >On 2/14/06, Tom Samplonius wrote: > > >>On Tue, 14 Feb 2006, Gary Palmer wrote: >> >> >> >>>I suspect higher end devices (e.g. HDS and EMC Symmetrix units) this >>>isn't a problem, but in mid range and lower end stuff I'd expect problems >>>if the paths landed on separate controllers on the array. >>> >>> >> I don't think this is a problem with current mid-range stuff. A mirrored >>write cache is considered a basic feature. Not only does a mirrored write cache >>protect against controller cache consistancy, it also protects losing the >>contents of the write cache if a controller fails, which is generally a much >>bigger problem. >> >> > >The EMC Clarion Series, at least the CX600 model I work with has >mirrored write cache. >In the event of controller failure it is disabled until redundancy is restored. >I had training on an entry level model, a CX300 and the funcionality >was the same. > >The Symetrix I bet it has but EMC doesn't let us touch those ;-) > > I know of at least 2 arrays from one manufacturer (which I suspect were actaully the same controller "heads" just with different numbers of drive trays and/or drive busses supported) which were aimed at the midrange "class" and did NOT support writing to the same LUN through different controllers. The controllers took the LUN offline for a while (measured in seconds, from memory) to hand off the LUN from one controller (the "owner") to the other (the one that had received the last write). This played havoc with systems who weren't using the vendor-supplied drivers, which we suspect were just delaying and retrying I/Os until the LUN came back. Maybe mirrored write cache isn't enough and there are other firmware things that are needed for this to work properly. The Symetrix should be fine as it, at least the last time I got a preso from EMC, has one cache shared amongst the host controllers. But if you are expecting to be able to write to a LUN through any controller, then its worth testing that the array doesn't have pathological behaviour. After the stuff I've seen, I can't make the assumption that it'll just work anymore. From owner-freebsd-scsi@FreeBSD.ORG Tue Feb 21 08:45:50 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 880BE16A420 for ; Tue, 21 Feb 2006 08:45:50 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from cs1.cs.huji.ac.il (cs1.cs.huji.ac.il [132.65.16.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 24EFC43D45 for ; Tue, 21 Feb 2006 08:45:50 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from pampa.cs.huji.ac.il ([132.65.80.32]) by cs1.cs.huji.ac.il with esmtp id 1FBT9Y-000Jqa-BA for scsi@freebsd.org; Tue, 21 Feb 2006 10:45:48 +0200 X-Mailer: exmh version 2.7.0 06/18/2004 with nmh-1.0.4 To: scsi@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 21 Feb 2006 10:45:48 +0200 From: Danny Braniss Message-ID: Cc: Subject: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 Feb 2006 08:45:50 -0000 what's the status of SAS under FreeBSD? all my searchs came back empty. or driver for none4@pci2:3:0: class=0x010000 card=0x30601000 chip=0x00501000 rev=0x02 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' class = mass storage subclass = SCSI this is a sunfire X4200 box (dual core amd). thanks, danny From owner-freebsd-scsi@FreeBSD.ORG Tue Feb 21 23:05:20 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 65EBB16A420 for ; Tue, 21 Feb 2006 23:05:20 +0000 (GMT) (envelope-from scrappy@hub.org) Received: from hub.org (hub.org [200.46.204.220]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6FD9343D6D for ; Tue, 21 Feb 2006 23:05:15 +0000 (GMT) (envelope-from scrappy@hub.org) Received: from localhost (unknown [200.46.204.144]) by hub.org (Postfix) with ESMTP id 88DC662C8FF; Tue, 21 Feb 2006 19:05:14 -0400 (AST) Received: from hub.org ([200.46.204.220]) by localhost (av.hub.org [200.46.204.144]) (amavisd-new, port 10024) with ESMTP id 66907-01; Tue, 21 Feb 2006 19:05:14 -0400 (AST) Received: from ganymede.hub.org (blk-222-82-85.eastlink.ca [24.222.82.85]) by hub.org (Postfix) with ESMTP id 2415662C81B; Tue, 21 Feb 2006 19:05:14 -0400 (AST) Received: by ganymede.hub.org (Postfix, from userid 1000) id BD5313920B; Tue, 21 Feb 2006 19:05:16 -0400 (AST) Received: from localhost (localhost [127.0.0.1]) by ganymede.hub.org (Postfix) with ESMTP id BC7D338C4F; Tue, 21 Feb 2006 19:05:16 -0400 (AST) Date: Tue, 21 Feb 2006 19:05:16 -0400 (AST) From: "Marc G. Fournier" To: Danny Braniss In-Reply-To: Message-ID: <20060221190442.I1931@ganymede.hub.org> References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Virus-Scanned: by amavisd-new at hub.org Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 Feb 2006 23:05:20 -0000 I'm running SAS on a new Proliant DL360 G4p without a problem ... the RAID controller that I'm using 'masks' the fact that its using SAS drives ... On Tue, 21 Feb 2006, Danny Braniss wrote: > what's the status of SAS under FreeBSD? all my searchs came back empty. > or driver for > none4@pci2:3:0: class=0x010000 card=0x30601000 chip=0x00501000 rev=0x02 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > class = mass storage > subclass = SCSI > > this is a sunfire X4200 box (dual core amd). > > thanks, > danny > > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > > ---- Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email: scrappy@hub.org Yahoo!: yscrappy ICQ: 7615664 From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 04:10:52 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6872416A420 for ; Wed, 22 Feb 2006 04:10:52 +0000 (GMT) (envelope-from lydianconcepts@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id F1E6443D45 for ; Wed, 22 Feb 2006 04:10:51 +0000 (GMT) (envelope-from lydianconcepts@gmail.com) Received: by wproxy.gmail.com with SMTP id i11so34228wra for ; Tue, 21 Feb 2006 20:10:51 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=cSwUbb5X9WGMOW/l0wcjrVK00ndeHQCUHpAsz+KqQ5iFFoXaBI9ZN8wwXOs2RXQBN8xmGe7pf0U6ViXhBm9KfvzC/h2wcQWpBOx/JyqtraAF8seTJTok/Kk2Ed4F0ppH04aG9QZTVdZrxA/YKYtadtkMaakrEqKkNVFPifWGNpE= Received: by 10.65.155.4 with SMTP id h4mr1865332qbo; Tue, 21 Feb 2006 20:10:50 -0800 (PST) Received: by 10.65.154.20 with HTTP; Tue, 21 Feb 2006 20:10:50 -0800 (PST) Message-ID: <7579f7fb0602212010ke05cb1eic39204c0503b9888@mail.gmail.com> Date: Tue, 21 Feb 2006 20:10:50 -0800 From: "Matthew Jacob" To: "Danny Braniss" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 04:10:52 -0000 Should now work in FreeBSD-current as of a week or so ago (courtesy of Chris Ellsworth's support). Some folks have reported issues, but both Chris and I haven't seen the same yet. On 2/21/06, Danny Braniss wrote: > what's the status of SAS under FreeBSD? all my searchs came back empty. > or driver for > none4@pci2:3:0: class=3D0x010000 card=3D0x30601000 chip=3D0x00501000 rev= =3D0x02 > hdr=3D0x00 > vendor =3D 'LSI Logic (Was: Symbios Logic, NCR)' > class =3D mass storage > subclass =3D SCSI > > this is a sunfire X4200 box (dual core amd). > > thanks, > danny > > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 06:57:28 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4AE8B16A420 for ; Wed, 22 Feb 2006 06:57:28 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from cs1.cs.huji.ac.il (cs1.cs.huji.ac.il [132.65.16.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id C6B6E43D49 for ; Wed, 22 Feb 2006 06:57:27 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from pampa.cs.huji.ac.il ([132.65.80.32]) by cs1.cs.huji.ac.il with esmtp id 1FBnwE-0001oV-Eu; Wed, 22 Feb 2006 08:57:26 +0200 X-Mailer: exmh version 2.7.0 06/18/2004 with nmh-1.0.4 To: "Matthew Jacob" In-reply-to: Your message of Tue, 21 Feb 2006 20:10:50 -0800 . Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Date: Wed, 22 Feb 2006 08:57:26 +0200 From: Danny Braniss Message-ID: Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 06:57:28 -0000 > Should now work in FreeBSD-current as of a week or so ago (courtesy of > Chris Ellsworth's support). Some folks have reported issues, but both > Chris and I haven't seen the same yet. > = and it will be MFC ...? danny > On 2/21/06, Danny Braniss wrote: > > what's the status of SAS under FreeBSD? all my searchs came back empt= y. > > or driver for > > none4@pci2:3:0: class=3D0x010000 card=3D0x30601000 chip=3D0x00501000 = rev=3D0x02 > > hdr=3D0x00 > > vendor =3D 'LSI Logic (Was: Symbios Logic, NCR)' > > class =3D mass storage > > subclass =3D SCSI > > > > this is a sunfire X4200 box (dual core amd). > > > > thanks, > > danny > > > > > > _______________________________________________ > > freebsd-scsi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.or= g" > > From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 09:12:24 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EA85A16A420 for ; Wed, 22 Feb 2006 09:12:24 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from cs1.cs.huji.ac.il (cs1.cs.huji.ac.il [132.65.16.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 73C1A43D46 for ; Wed, 22 Feb 2006 09:12:24 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from pampa.cs.huji.ac.il ([132.65.80.32]) by cs1.cs.huji.ac.il with esmtp id 1FBq2o-0006DQ-Hs; Wed, 22 Feb 2006 11:12:22 +0200 X-Mailer: exmh version 2.7.0 06/18/2004 with nmh-1.0.4 To: "Marc G. Fournier" In-reply-to: Your message of Tue, 21 Feb 2006 19:05:16 -0400 (AST) . Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 22 Feb 2006 11:12:22 +0200 From: Danny Braniss Message-ID: Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 09:12:25 -0000 > > I'm running SAS on a new Proliant DL360 G4p without a problem ... the RAID > controller that I'm using 'masks' the fact that its using SAS drives ... > I have a similar box - after all your praises :-), and it's working fine. but of course the SAS is hiding behind the the ciss. btw, sun's ilo is by default the 'enterprise edition' while with hp it's an add on, it allows for 'virtual disk/cd'. i also liked in hp the 'virtual power', now if it was also virtual as in virtual reality ... we could save allot of power (maybe it will also be virtual power :-), i wonder how long it will take till we have virtual programs, and finaly virtual programmers ... > On Tue, 21 Feb 2006, Danny Braniss wrote: > > > what's the status of SAS under FreeBSD? all my searchs came back empty. > > or driver for > > none4@pci2:3:0: class=0x010000 card=0x30601000 chip=0x00501000 rev=0x02 > > hdr=0x00 > > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > > class = mass storage > > subclass = SCSI > > > > this is a sunfire X4200 box (dual core amd). > > > > thanks, > > danny > > > > > > _______________________________________________ > > freebsd-scsi@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > > > > > > ---- > Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) > Email: scrappy@hub.org Yahoo!: yscrappy ICQ: 7615664 From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 14:12:01 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EBA3616A420 for ; Wed, 22 Feb 2006 14:12:01 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from cs1.cs.huji.ac.il (cs1.cs.huji.ac.il [132.65.16.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9A3BB43D6A for ; Wed, 22 Feb 2006 14:11:57 +0000 (GMT) (envelope-from danny@cs.huji.ac.il) Received: from pampa.cs.huji.ac.il ([132.65.80.32]) by cs1.cs.huji.ac.il with esmtp id 1FBuih-000HTv-Mh; Wed, 22 Feb 2006 16:11:55 +0200 X-Mailer: exmh version 2.7.0 06/18/2004 with nmh-1.0.4 To: Danny Braniss In-Reply-To: Message from Danny Braniss of "Wed, 22 Feb 2006 08:57:26 +0200." Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Date: Wed, 22 Feb 2006 16:11:55 +0200 From: Danny Braniss Message-ID: Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 14:12:02 -0000 > > Should now work in FreeBSD-current as of a week or so ago (courtesy o= f > > Chris Ellsworth's support). Some folks have reported issues, but both= > > Chris and I haven't seen the same yet. > > = > and it will be MFC ...? > = i replaced the mpt driver in stable from current, and it works! well, im now doing a make buildworld on it mpt0@pci2:3:0: class=3D0x010000 card=3D0x30601000 chip=3D0x00501000 rev=3D= 0x02 = hdr=3D0x00 vendor =3D 'LSI Logic (Was: Symbios Logic, NCR)' class =3D mass storage subclass =3D SCSI > danny > = > > On 2/21/06, Danny Braniss wrote: > > > what's the status of SAS under FreeBSD? all my searchs came back em= pty. > > > or driver for > > > none4@pci2:3:0: class=3D0x010000 card=3D0x30601000 chip=3D0x0050100= 0 rev=3D0x02 > > > hdr=3D0x00 > > > vendor =3D 'LSI Logic (Was: Symbios Logic, NCR)' > > > class =3D mass storage > > > subclass =3D SCSI > > > > > > this is a sunfire X4200 box (dual core amd). > > > > > > thanks, > > > danny > > > > > > > > > _______________________________________________ > > > freebsd-scsi@freebsd.org mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > > > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.= org" > > > > = > = > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"= > = From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 18:49:16 2006 Return-Path: X-Original-To: freebsd-scsi@freebsd.org Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E9F2C16A420 for ; Wed, 22 Feb 2006 18:49:16 +0000 (GMT) (envelope-from sean.berry@cox.net) Received: from fed1rmmtao07.cox.net (fed1rmmtao07.cox.net [68.230.241.32]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2257743D46 for ; Wed, 22 Feb 2006 18:49:16 +0000 (GMT) (envelope-from sean.berry@cox.net) Received: from [172.18.180.8] (really [172.18.180.10]) by fed1rmmtao07.cox.net (InterMail vM.6.01.05.02 201-2131-123-102-20050715) with SMTP id <20060222184804.TPR3131.fed1rmmtao07.cox.net@[172.18.180.8]> for ; Wed, 22 Feb 2006 13:48:04 -0500 X-Mailer: Openwave WebEngine, version 2.8.15 (webedge20-101-1103-20040528) From: To: Date: Wed, 22 Feb 2006 10:45:36 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Message-Id: <20060222184804.TPR3131.fed1rmmtao07.cox.net@[172.18.180.8]> Subject: Hot Swap SCSI drive not working... X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 18:49:17 -0000 I have just inserted a new drive for my IBM xSeries 335 running FreeBSD 4.9 REL. After inserting the drive I got a message saying sean# mnt1: Ext Bus Reset But when I go to setup the disk using sysinstall, it does not give me the choice of da1, only da0 - the original disk. camcontrol sees the device, but it is not showing da1? sean# camcontrol devlist at scbus0 target 0 lun 0 (pass0,da0) at scbus0 target 8 lun 0 (pass1) Any help is greatly appreciated. From owner-freebsd-scsi@FreeBSD.ORG Wed Feb 22 19:02:42 2006 Return-Path: X-Original-To: freebsd-scsi@freebsd.org Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1AFD416A420 for ; Wed, 22 Feb 2006 19:02:42 +0000 (GMT) (envelope-from os@rsu.ru) Received: from mail.r61.net (mail.r61.net [195.208.245.235]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3897643D5F for ; Wed, 22 Feb 2006 19:02:31 +0000 (GMT) (envelope-from os@rsu.ru) Received: from brain.cc.rsu.ru (brain.cc.rsu.ru [195.208.252.154]) (authenticated bits=0) by mail.r61.net (8.13.4/8.13.4) with ESMTP id k1MJ2LE2036024 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 22 Feb 2006 22:02:24 +0300 (MSK) (envelope-from os@rsu.ru) Date: Wed, 22 Feb 2006 22:02:21 +0300 (MSK) From: Oleg Sharoiko To: sean.berry@cox.net In-Reply-To: <20060222184804.TPR3131.fed1rmmtao07.cox.net@[172.18.180.8]> Message-ID: <20060222220000.Y27134@brain.cc.rsu.ru> References: <20060222184804.TPR3131.fed1rmmtao07.cox.net@[172.18.180.8]> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: ClamAV version 0.86.2, clamav-milter version 0.86 on asterix.r61.net X-Virus-Status: Clean Cc: freebsd-scsi@freebsd.org Subject: Re: Hot Swap SCSI drive not working... X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Feb 2006 19:02:42 -0000 On Wed, 22 Feb 2006, sean.berry@cox.net wrote: >sean# camcontrol devlist > at scbus0 target 0 lun 0 (pass0,da0) > at scbus0 target 8 lun 0 (pass1) >Any help is greatly appreciated. Is this RAID controller or just SCSI ? If this is just SCSI drive then try camcontrol rescan all If this is RAID, then you might need to configure RAID with it's own utilities. -- Oleg Sharoiko. Software and Network Engineer Computer Center of Rostov State University. From owner-freebsd-scsi@FreeBSD.ORG Thu Feb 23 16:25:01 2006 Return-Path: X-Original-To: scsi@freebsd.org Delivered-To: freebsd-scsi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3F56016A437 for ; Thu, 23 Feb 2006 16:25:01 +0000 (GMT) (envelope-from lydianconcepts@gmail.com) Received: from zproxy.gmail.com (zproxy.gmail.com [64.233.162.194]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0BEF243D6E for ; Thu, 23 Feb 2006 16:24:52 +0000 (GMT) (envelope-from lydianconcepts@gmail.com) Received: by zproxy.gmail.com with SMTP id z6so100406nzd for ; Thu, 23 Feb 2006 08:24:51 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=j/9EcDt28vH5A+SyiOft1+QYtw7W807Xcq8dgjBCLFlnu/ZNbUQSmxLm+/iGZ3mw/84qk5V786C+QYYdSsGx5n7QvNuTJYSY6yfpoTaiHwfwdjLITJW+EVxgerp9GQh41Esbw/Y3jOCex8BibDB9WfJ/6Jmo/q8EEDmHJpnH35k= Received: by 10.65.152.9 with SMTP id e9mr2024640qbo; Thu, 23 Feb 2006 08:24:51 -0800 (PST) Received: by 10.65.154.20 with HTTP; Thu, 23 Feb 2006 08:24:51 -0800 (PST) Message-ID: <7579f7fb0602230824oc35b293s51109104daa4d65d@mail.gmail.com> Date: Thu, 23 Feb 2006 08:24:51 -0800 From: "Matthew Jacob" To: "Danny Braniss" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: Cc: scsi@freebsd.org Subject: Re: SAS - Serial Attached SCSI X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 23 Feb 2006 16:25:01 -0000 On 2/21/06, Danny Braniss wrote: > > Should now work in FreeBSD-current as of a week or so ago (courtesy of > > Chris Ellsworth's support). Some folks have reported issues, but both > > Chris and I haven't seen the same yet. > > > and it will be MFC ...? > As soon as 6.1 releases, which will give it more soak time in -current. From owner-freebsd-scsi@FreeBSD.ORG Fri Feb 24 18:02:50 2006 Return-Path: X-Original-To: freebsd-scsi@freebsd.org Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 74ABD16A420 for ; Fri, 24 Feb 2006 18:02:50 +0000 (GMT) (envelope-from Juergen.Dankoweit@t-online.de) Received: from mailout11.sul.t-online.com (mailout11.sul.t-online.com [194.25.134.85]) by mx1.FreeBSD.org (Postfix) with ESMTP id B22F643D48 for ; Fri, 24 Feb 2006 18:02:49 +0000 (GMT) (envelope-from Juergen.Dankoweit@t-online.de) Received: from fwd34.aul.t-online.de by mailout11.sul.t-online.com with smtp id 1FChHE-0002yO-01; Fri, 24 Feb 2006 19:02:48 +0100 Received: from mail.juergendankoweit.net (EwqcRaZc8exCQ+RO-0gKUIlFHa6XA9xT5IEio+O4R9PCJcPn0zjFoJ@[84.150.78.185]) by fwd34.sul.t-online.de with esmtp id 1FChH1-10s9JI0; Fri, 24 Feb 2006 19:02:35 +0100 Received: from localhost.juergendankoweit.net (localhost.juergendankoweit.net [127.0.0.1]) by mail.juergendankoweit.net (Postfix) with ESMTP id 5E0B911B5D for ; Fri, 24 Feb 2006 19:02:47 +0100 (CET) Received: from mail.juergendankoweit.net (localhost.juergendankoweit.net [127.0.0.1]) by localhost.juergendankoweit.net (AvMailGate-2.0.2-15) id 02531-4FC93F1F; Fri, 24 Feb 2006 19:02:46 +0100 Received: from primergy470.juergendankoweit.net (primergy470.juergendankoweit.net [192.168.1.1]) by mail.juergendankoweit.net (Postfix) with ESMTP id 275E1114F6 for ; Fri, 24 Feb 2006 19:02:46 +0100 (CET) From: Juergen Dankoweit To: freebsd-scsi@FreeBSD.org Date: Fri, 24 Feb 2006 19:02:44 +0100 Message-Id: <1140804164.2360.4.camel@primergy470.juergendankoweit.net> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1 FreeBSD GNOME Team Port Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-AntiVirus: checked by AntiVir MailGate (version: 2.0.2-15; AVE: 6.33.1.0; VDF: 6.33.1.27; host: primergy470.juergendankoweit.net) X-ID: EwqcRaZc8exCQ+RO-0gKUIlFHa6XA9xT5IEio+O4R9PCJcPn0zjFoJ X-TOI-MSGID: 144c696b-a807-4398-a5ef-8e2d17367b10 Cc: Subject: FreeBSD 6.1 BETA 2 has problems with Symbios/LSI-HBAs X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Juergen.Dankoweit@T-Online.de List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Feb 2006 18:02:50 -0000 Hello to the list, at Wed Nov 9 and Feb 10 I wrote the following text: [cite] Hello to the list. On my production server (private and at firm) I had the possiblity to test the new FreeBSD 6.0 RC1, REALESE, 6.1 Beta1 and Beta2 in the downtime. Both systems are Siemens Primergy 470, dual PIII 450 MHz, two LSI 83C895 SCSI-HBAs (one onboard and one on a separate PCI card). At the onboard HBA all HDDs are LVD drives. At the second only single ended devices are connected. The termination is correct. On both systems it is imposisible to install FreeBSD 6 because it hangs at this position: (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS mode change from SE to SE. here stops the system. After about five minutes the following messages are shown character for character. (When the SAF/TE is connected) (probe7:sym0:0:8:0): phase change 6-7 6 at 0f76058c resid=3D4. ses0 at sym0 bus 0 target 8 lun 0 ses0: Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device (When the SAF/TE is NOT connected it jumps directly to these messages) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) And here nothing goes on.=20 Exactly this behavior was on FreeBSD 5.3 STABLE-1. It was fixed with FBSD 5.3 STABLE-2. FreeBSD 5.4 runs also perfect on these machines. But in the new version of FreeBSD the same bug comes again.=20 On the production machines it is impossible to install or upgrade the new FreeBSD 6 to do more tests. Please send an email if more information is needed, but let me say again: these machines are production servers. I don't have the possibility to compile any kernels or change adapters. Many thanks for your help. Best regards J=C3=BCrgen [/cite] These symptoms are still existing, but now with FreeBSD 6.1 Beta 1 and FreeBSD 6.1 Beta 2!!! Meanwhile our servers are updated to FreeBSD 5.4, the last version which runs perfectly. Regards J=C3=BCrgen -- This e-mail was scanned with a private, non-commercial version of AntiVir MailGate. See http://www.antivir.de for details. From owner-freebsd-scsi@FreeBSD.ORG Fri Feb 24 18:10:14 2006 Return-Path: X-Original-To: freebsd-scsi@hub.freebsd.org Delivered-To: freebsd-scsi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8B7CA16A420 for ; Fri, 24 Feb 2006 18:10:14 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id AB49A43D48 for ; Fri, 24 Feb 2006 18:10:10 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k1OIAAf6012676 for ; Fri, 24 Feb 2006 18:10:10 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k1OIAAjj012675; Fri, 24 Feb 2006 18:10:10 GMT (envelope-from gnats) Date: Fri, 24 Feb 2006 18:10:10 GMT Message-Id: <200602241810.k1OIAAjj012675@freefall.freebsd.org> To: freebsd-scsi@FreeBSD.org From: Juergen Dankoweit Cc: Subject: Re: kern/93128: [sym] FreeBSD 6.1 BETA 1 has problems with Symbios/LSI-HBAs (regression) X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Juergen Dankoweit List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Feb 2006 18:10:14 -0000 The following reply was made to PR kern/93128; it has been noted by GNATS. From: Juergen Dankoweit To: bug-followup@FreeBSD.org, Juergen.Dankoweit@T-Online.de Cc: Subject: Re: kern/93128: [sym] FreeBSD 6.1 BETA 1 has problems with Symbios/LSI-HBAs (regression) Date: Fri, 24 Feb 2006 19:08:45 +0100 Hello support team, the same problems are at FreeBSD 6.1 Beta2. The funny thing is that other operating systems are running perfect on this kind of hardware.=20 Best regards J=C3=BCrgen Dankoweit -- This e-mail was scanned with a private, non-commercial version of AntiVir MailGate. See http://www.antivir.de for details. From owner-freebsd-scsi@FreeBSD.ORG Fri Feb 24 21:45:51 2006 Return-Path: X-Original-To: freebsd-scsi@FreeBSD.org Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EDAF816A420 for ; Fri, 24 Feb 2006 21:45:51 +0000 (GMT) (envelope-from jkim@FreeBSD.org) Received: from anuket.mj.niksun.com (gwnew.niksun.com [65.115.46.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 868A943D6D for ; Fri, 24 Feb 2006 21:45:49 +0000 (GMT) (envelope-from jkim@FreeBSD.org) Received: from niksun.com (anuket [10.70.0.5]) by anuket.mj.niksun.com (8.13.1/8.13.1) with ESMTP id k1OLjm7d003006 for ; Fri, 24 Feb 2006 16:45:48 -0500 (EST) (envelope-from jkim@FreeBSD.org) From: Jung-uk Kim To: freebsd-scsi@FreeBSD.org Date: Fri, 24 Feb 2006 16:45:34 -0500 User-Agent: KMail/1.6.2 MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200602241645.36042.jkim@FreeBSD.org> X-Virus-Scanned: ClamAV devel-20050919/1301/Fri Feb 24 05:04:11 2006 on anuket.mj.niksun.com X-Virus-Status: Clean Cc: Subject: A tiny amr(4) monitoring tool X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 24 Feb 2006 21:45:52 -0000 This is a small amr(4) tool that I've been using for a while. It was originally posted here: http://docs.freebsd.org/cgi/mid.cgi?42345F33.8030101 I added few more features, e. g., battery status, physical drive status, etc. Sorry but the source is not very clean (i. e., ENOTIME). http://people.freebsd.org/~jkim/amrstat2.tar.gz usage: amrstat [-a num] [-b] [-c ctlr|-f dev] [-g] [-l vol] [-p drive|-s bus[:target]] [-t usec] [-v] -a num number of retries -b battery status -c ctrl controller ID -f dev device path -g print global parameters -l vol logical volume ID -p drive physical drive ID -s bus[:target] SCSI bus (and optinal target) -t usec sleep time between retries -v verbose output Example 1: # amrstat Logical volume 0 optimal (547.67 GB, RAID5) Logical volume 1 optimal (547.67 GB, RAID5) Physical drive 0:10 online Physical drive 0:11 online Physical drive 0:12 online Physical drive 0:13 online Physical drive 1:0 online Physical drive 1:1 online Physical drive 1:2 online Physical drive 1:3 hotspare Physical drive 1:4 online Physical drive 1:5 online Example 2: # amrstat -b -l0 -s0 Battery status not present, charge unknown Logical volume 0 degraded (341.83 GB, RAID5) Physical drive 0:0 online Physical drive 0:1 online Physical drive 0:2 rebuild Physical drive 0:3 online Physical drive 0:4 online Physical drive 0:5 online If other tools are too heavy for you, this may be a good alternative. Cheers, Jung-uk Kim From owner-freebsd-scsi@FreeBSD.ORG Sat Feb 25 17:56:58 2006 Return-Path: X-Original-To: freebsd-scsi@freebsd.org Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CA5F016A420; Sat, 25 Feb 2006 17:56:58 +0000 (GMT) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3E45743D45; Sat, 25 Feb 2006 17:56:55 +0000 (GMT) (envelope-from scottl@samsco.org) Received: from [192.168.254.14] (imini.samsco.home [192.168.254.14]) (authenticated bits=0) by pooker.samsco.org (8.13.4/8.13.4) with ESMTP id k1PHusaK025566; Sat, 25 Feb 2006 10:56:54 -0700 (MST) (envelope-from scottl@samsco.org) Message-ID: <44009A66.1040804@samsco.org> Date: Sat, 25 Feb 2006 10:56:54 -0700 From: Scott Long User-Agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.7.7) Gecko/20050416 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jung-uk Kim References: <200602241645.36042.jkim@FreeBSD.org> In-Reply-To: <200602241645.36042.jkim@FreeBSD.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=-1.4 required=3.8 tests=ALL_TRUSTED autolearn=failed version=3.1.0 X-Spam-Checker-Version: SpamAssassin 3.1.0 (2005-09-13) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org Subject: Re: A tiny amr(4) monitoring tool X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 25 Feb 2006 17:56:58 -0000 This is pretty cool. You should check it into /usr/src/usr.sbin. I'm working on a similar tool for IPS. Scott Jung-uk Kim wrote: > This is a small amr(4) tool that I've been using for a while. It was > originally posted here: > > http://docs.freebsd.org/cgi/mid.cgi?42345F33.8030101 > > I added few more features, e. g., battery status, physical drive > status, etc. Sorry but the source is not very clean (i. e., > ENOTIME). > > http://people.freebsd.org/~jkim/amrstat2.tar.gz > > usage: amrstat [-a num] [-b] [-c ctlr|-f dev] [-g] [-l vol] > [-p drive|-s bus[:target]] [-t usec] [-v] > > -a num number of retries > -b battery status > -c ctrl controller ID > -f dev device path > -g print global parameters > -l vol logical volume ID > -p drive physical drive ID > -s bus[:target] SCSI bus (and optinal target) > -t usec sleep time between retries > -v verbose output > > Example 1: > # amrstat > Logical volume 0 optimal (547.67 GB, RAID5) > Logical volume 1 optimal (547.67 GB, RAID5) > Physical drive 0:10 online > Physical drive 0:11 online > Physical drive 0:12 online > Physical drive 0:13 online > Physical drive 1:0 online > Physical drive 1:1 online > Physical drive 1:2 online > Physical drive 1:3 hotspare > Physical drive 1:4 online > Physical drive 1:5 online > > Example 2: > # amrstat -b -l0 -s0 > Battery status not present, charge unknown > Logical volume 0 degraded (341.83 GB, RAID5) > Physical drive 0:0 online > Physical drive 0:1 online > Physical drive 0:2 rebuild > Physical drive 0:3 online > Physical drive 0:4 online > Physical drive 0:5 online > > If other tools are too heavy for you, this may be a good alternative. > > Cheers, > > Jung-uk Kim > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"