Date: Sun, 16 Apr 2006 18:33:43 GMT From: K S Braunsdorf <sparc64@ksb.npcguild.org> To: freebsd-gnats-submit@FreeBSD.org Subject: sparc64/95892: MAC address of hme interfaces is ff:ff:ff:ff:ff:ff after reboot Message-ID: <200604161833.k3GIXhM2060505@www.freebsd.org> Resent-Message-ID: <200604161840.k3GIeBvW082732@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 95892
>Category: sparc64
>Synopsis: MAC address of hme interfaces is ff:ff:ff:ff:ff:ff after reboot
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-sparc64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Apr 16 18:40:11 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: K S Braunsdorf
>Release: 6.1-RC1
>Organization:
NPC Guild
>Environment:
FreeBSD mirror.npcguild.org 6.1-RC1 FreeBSD 6.1-RC1 #0: Tue Apr 11 05:26:08 UTC 2006 root@s-dallas.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC sparc64
An Ultra 2 with 2Gb of RAM and 2 300Mhz processors, a qfe card, an
CDROM drive and 2 9Gb scsi drives.
>Description:
The install for 6.1-RC1 brought up the network on hme1 just fine.
After a reboot all the 5 (built-in hme0, + a quad-fast card) hme
interfaces showed a mac address of ff:ff:ff:ff:ff:ff, which of
course wouldn't talk.
I used ifconfig to set a valid mac address on hme1 and it started
working. I could help debug this, as needed.
This is sample of an untouched interface:
mirror# ifconfig hme2
hme2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether ff:ff:ff:ff:ff:ff
media: Ethernet autoselect
The probe looks like this:
hme0: <Sun HME 10/100 Ethernet> mem 0x8c00000-0x8c00107,0x8c02000-0x8c03fff,0x8c
04000-0x8c05fff,0x8c06000-0x8c07fff,0x8c07000-0x8c0701f irq 2017 on sbus0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: ff:ff:ff:ff:ff:ff
sbus0: <SUNW,bpp> mem 0xc800000-0xc80001b irq 2018 type unknown (no driver attac
hed)
hme1: <Sun HME 10/100 Ethernet> mem 0x8c00000-0x8c00107,0x8c02000-0x8c03fff,0x8c
04000-0x8c05fff,0x8c06000-0x8c07fff,0x8c07000-0x8c0701f irq 2004 on sbus0
miibus1: <MII bus> on hme1
qsphy0: <QS6612 10/100 media interface> on miibus1
qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: ff:ff:ff:ff:ff:ff
hme2: <Sun HME 10/100 Ethernet> mem 0x8c10000-0x8c10107,0x8c12000-0x8c13fff,0x8c
14000-0x8c15fff,0x8c16000-0x8c17fff,0x8c17000-0x8c1701f irq 2004 on sbus0
miibus2: <MII bus> on hme2
qsphy1: <QS6612 10/100 media interface> on miibus2
qsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme2: Ethernet address: ff:ff:ff:ff:ff:ff
hme3: <Sun HME 10/100 Ethernet> mem 0x8c20000-0x8c20107,0x8c22000-0x8c23fff,0x8c
24000-0x8c25fff,0x8c26000-0x8c27fff,0x8c27000-0x8c2701f irq 2004 on sbus0
miibus3: <MII bus> on hme3
qsphy2: <QS6612 10/100 media interface> on miibus3
qsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme3: Ethernet address: ff:ff:ff:ff:ff:ff
hme4: <Sun HME 10/100 Ethernet> mem 0x8c30000-0x8c30107,0x8c32000-0x8c33fff,0x8c
34000-0x8c35fff,0x8c36000-0x8c37fff,0x8c37000-0x8c3701f irq 2004 on sbus0
miibus4: <MII bus> on hme4
qsphy3: <QS6612 10/100 media interface> on miibus4
qsphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme4: Ethernet address: ff:ff:ff:ff:ff:ff
creator0: <Creator> on nexus0
creator0: resolution 1152x900
>How-To-Repeat:
I just installed from the CDROM pair, then rebooted.
Noticed that the network didn't come back up. I don't
have a graphic head on the Ultra 2, just a serial line
and tip from another host. I don't know if the qfe card
is the key issue (yet).
>Fix:
I just worked around it.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604161833.k3GIXhM2060505>