From owner-freebsd-acpi@FreeBSD.ORG Mon May 7 11:08:17 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id F3BC716A401 for ; Mon, 7 May 2007 11:08:16 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id C723D13C447 for ; Mon, 7 May 2007 11:08:16 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id l47B8Glc078554 for ; Mon, 7 May 2007 11:08:16 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id l47B8F96078550 for freebsd-acpi@FreeBSD.org; Mon, 7 May 2007 11:08:15 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 7 May 2007 11:08:15 GMT Message-Id: <200705071108.l47B8F96078550@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: linimon set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 May 2007 11:08:17 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o kern/55822 acpi No ACPI power off with SMP kernel o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/64002 acpi acpi problem o i386/67273 acpi [hang] system hangs with acpi and Xfree o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 f kern/73221 acpi acpi suspend ATI mobility 9000 s i386/79080 acpi acpi thermal changes freezes HP nx6110 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker 14 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/67309 acpi zzz reboot computer (ACPI S3) o i386/69750 acpi Boot without ACPI failed on ASUS L5 o i386/72179 acpi [acpi] [patch] Inconsistent apm(8) output regarding th o kern/73823 acpi [feature request] acpi / power-on by timer support f kern/74868 acpi [acpi] ACPI enabled in 5.3 Release make Kernel reboot o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys o kern/89411 acpi [acpi] acpiconf bug f kern/90871 acpi ACPI problems with ASUS A8N-VM-CSM o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI o i386/97468 acpi [acpi] ACPI on ASUS A7V hangs on shutdown -p (power of o kern/98171 acpi [acpi] ACPI 1304 / 0501 errors on Acer 5024WLMi Laptop o i386/102343 acpi ACPI error o kern/103365 acpi [acpi] acpi poweroff doesn't work with geli device att o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108581 acpi [sysctl] sysctl: hw.acpi.cpu.cx_lowest: Invalid argume o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in f kern/109207 acpi ACPI Problem o kern/111591 acpi [acpi] dev.acpi_ibm.0.events returns I/O error (regres 20 problems total. From owner-freebsd-acpi@FreeBSD.ORG Wed May 9 11:27:27 2007 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id AC49716A404; Wed, 9 May 2007 11:27:27 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id 818A513C45A; Wed, 9 May 2007 11:27:27 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id l49BRRCJ009868; Wed, 9 May 2007 11:27:27 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id l49BRRkG009864; Wed, 9 May 2007 11:27:27 GMT (envelope-from linimon) Date: Wed, 9 May 2007 11:27:27 GMT From: Mark Linimon Message-Id: <200705091127.l49BRRkG009864@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-acpi@FreeBSD.org Cc: Subject: Re: kern/112544: [acpi] [patch] Add High Precision Event Timer Driver for userland timer facility X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 May 2007 11:27:27 -0000 Synopsis: [acpi] [patch] Add High Precision Event Timer Driver for userland timer facility Responsible-Changed-From-To: freebsd-bugs->freebsd-acpi Responsible-Changed-By: linimon Responsible-Changed-When: Wed May 9 11:27:19 UTC 2007 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=112544 From owner-freebsd-acpi@FreeBSD.ORG Wed May 9 13:40:10 2007 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D7C0616A405 for ; Wed, 9 May 2007 13:40:10 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id AD81613C4BF for ; Wed, 9 May 2007 13:40:10 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id l49DeA5R027586 for ; Wed, 9 May 2007 13:40:10 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id l49DeAKr027584; Wed, 9 May 2007 13:40:10 GMT (envelope-from gnats) Date: Wed, 9 May 2007 13:40:10 GMT Message-Id: <200705091340.l49DeAKr027584@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: Gavin Atkinson Cc: Subject: Re: kern/90871: ACPI problems with ASUS A8N-VM-CSM X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Gavin Atkinson List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 May 2007 13:40:10 -0000 The following reply was made to PR kern/90871; it has been noted by GNATS. From: Gavin Atkinson To: bug-followup@FreeBSD.org, paul.lkw@mfun.org Cc: Subject: Re: kern/90871: ACPI problems with ASUS A8N-VM-CSM Date: Wed, 09 May 2007 14:33:04 +0100 Hi, Is it possible to test the BIOS update mentioned in this PR, along with a more recent version of FreeBSD and see if it fixes your problems please? The BIOS update looks to have fixed the issues for at least one other FreeBSD user. Thanks, Gavin From owner-freebsd-acpi@FreeBSD.ORG Thu May 10 15:47:07 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 39D7016A400 for ; Thu, 10 May 2007 15:47:07 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (66-23-211-162.clients.speedfactory.net [66.23.211.162]) by mx1.freebsd.org (Postfix) with ESMTP id 9771F13C487 for ; Thu, 10 May 2007 15:47:06 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.13.8/8.13.8) with ESMTP id l4AFl0DD000987; Thu, 10 May 2007 11:47:00 -0400 (EDT) (envelope-from jhb@freebsd.org) From: John Baldwin To: freebsd-acpi@freebsd.org Date: Thu, 10 May 2007 10:56:24 -0400 User-Agent: KMail/1.9.6 References: <200606151237.07904.mistry.7@osu.edu> In-Reply-To: <200606151237.07904.mistry.7@osu.edu> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200705101056.24872.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Thu, 10 May 2007 11:47:01 -0400 (EDT) X-Virus-Scanned: ClamAV 0.88.3/3225/Thu May 10 04:08:21 2007 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.4 required=4.2 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: Subject: Re: Clear Abnormal Termination Bit X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 May 2007 15:47:07 -0000 On Thursday 15 June 2006 12:36:58 pm Anish Mistry wrote: > I just saw an email on the Linux ACPI list someone posted they needed > to clear the abnormal termination bit on some motherboards before > suspending so that the BIOS would correctly hand-off back to the OS. > > I'm not sure if we're doing this already, but the equivilent would be > to put the following before going into S3: > AcpiHwRegisterWrite (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, > 0x800); I looked at this again today, and it was actually fixed in ACPICA by preserving the state of certain reserved bits. 7.0 has the updated ACPICA (20060623 or later). -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Thu May 10 19:53:11 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 9BAF116A400 for ; Thu, 10 May 2007 19:53:11 +0000 (UTC) (envelope-from peterleham@yahoo.ca) Received: from web62506.mail.re1.yahoo.com (web62506.mail.re1.yahoo.com [69.147.75.98]) by mx1.freebsd.org (Postfix) with SMTP id 3490B13C44B for ; Thu, 10 May 2007 19:53:11 +0000 (UTC) (envelope-from peterleham@yahoo.ca) Received: (qmail 46635 invoked by uid 60001); 10 May 2007 19:53:10 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.ca; h=X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=W2BKPjZFhY6ZoIVCI1MKnOM0kzexmz/OVjdxidiTsMMBLLiuwgQ5h/vt++hZ40hmDUJVOddrmOkoO7sfapwnrHQ8EdMpSw1X9w+3pldaWaBQpgl4U8u27Ib7j1zIEq9diGaJAs9sh0V+AL0vStV+hQKpJPnV0ePBzO1xk9or+wA=; X-YMail-OSG: ZpV8yV0VM1knbhWIVkG7VlrdVl6LBKrUbaTZuEMQnPor7iRc4Pc1tgnLCM4pd92tFEQYJioWcCmkpYxC706uY4D1cJZghFtjdOjQEvT.hySioXOLbHHz Received: from [128.233.133.11] by web62506.mail.re1.yahoo.com via HTTP; Thu, 10 May 2007 12:53:10 PDT X-Mailer: YahooMailRC/478 YahooMailWebService/0.7.41.10 Date: Thu, 10 May 2007 12:53:10 -0700 (PDT) From: Peter Leham To: freebsd-acpi@freebsd.org, freebsd-acpi@freebsd.org MIME-Version: 1.0 Message-ID: <559609.45978.qm@web62506.mail.re1.yahoo.com> Content-Type: text/plain; charset=ascii X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Call for testers: New acpi_ibm driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 May 2007 19:53:11 -0000 Hi I had to rebuild my IBM T60p laptop now I need a driver for ACPI\IBM0068 any help would be greatly appciated Peter Leham leham@commerce.usask.ca Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca From owner-freebsd-acpi@FreeBSD.ORG Thu May 10 20:19:51 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 5458B16A402 for ; Thu, 10 May 2007 20:19:51 +0000 (UTC) (envelope-from peterleham@yahoo.ca) Received: from web62506.mail.re1.yahoo.com (web62506.mail.re1.yahoo.com [69.147.75.98]) by mx1.freebsd.org (Postfix) with SMTP id D8B7213C465 for ; Thu, 10 May 2007 20:19:50 +0000 (UTC) (envelope-from peterleham@yahoo.ca) Received: (qmail 46635 invoked by uid 60001); 10 May 2007 19:53:10 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.ca; h=X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=W2BKPjZFhY6ZoIVCI1MKnOM0kzexmz/OVjdxidiTsMMBLLiuwgQ5h/vt++hZ40hmDUJVOddrmOkoO7sfapwnrHQ8EdMpSw1X9w+3pldaWaBQpgl4U8u27Ib7j1zIEq9diGaJAs9sh0V+AL0vStV+hQKpJPnV0ePBzO1xk9or+wA=; X-YMail-OSG: ZpV8yV0VM1knbhWIVkG7VlrdVl6LBKrUbaTZuEMQnPor7iRc4Pc1tgnLCM4pd92tFEQYJioWcCmkpYxC706uY4D1cJZghFtjdOjQEvT.hySioXOLbHHz Received: from [128.233.133.11] by web62506.mail.re1.yahoo.com via HTTP; Thu, 10 May 2007 12:53:10 PDT X-Mailer: YahooMailRC/478 YahooMailWebService/0.7.41.10 Date: Thu, 10 May 2007 12:53:10 -0700 (PDT) From: Peter Leham To: freebsd-acpi@freebsd.org, freebsd-acpi@freebsd.org MIME-Version: 1.0 Message-ID: <559609.45978.qm@web62506.mail.re1.yahoo.com> Content-Type: text/plain; charset=ascii X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Call for testers: New acpi_ibm driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 May 2007 20:19:51 -0000 Hi I had to rebuild my IBM T60p laptop now I need a driver for ACPI\IBM0068 any help would be greatly appciated Peter Leham leham@commerce.usask.ca Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail at http://mrd.mail.yahoo.com/try_beta?.intl=ca From owner-freebsd-acpi@FreeBSD.ORG Thu May 10 23:48:04 2007 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 3782F16A400 for ; Thu, 10 May 2007 23:48:04 +0000 (UTC) (envelope-from henrik@brixandersen.dk) Received: from solow.pil.dk (relay.pil.dk [195.41.47.164]) by mx1.freebsd.org (Postfix) with ESMTP id EC10113C457 for ; Thu, 10 May 2007 23:48:03 +0000 (UTC) (envelope-from henrik@brixandersen.dk) Received: from tirith.brixandersen.dk (osgiliath.brixandersen.dk [87.53.223.189]) by solow.pil.dk (Postfix) with ESMTP id B70AF1CC0DE for ; Fri, 11 May 2007 01:48:02 +0200 (CEST) Received: by tirith.brixandersen.dk (Postfix, from userid 1001) id 39817B8D1; Fri, 11 May 2007 01:48:02 +0200 (CEST) Date: Fri, 11 May 2007 01:48:01 +0200 From: Henrik Brix Andersen To: freebsd-acpi@freebsd.org Message-ID: <20070510234801.GC71071@tirith.brixandersen.dk> Mail-Followup-To: freebsd-acpi@freebsd.org References: <559609.45978.qm@web62506.mail.re1.yahoo.com> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="/NkBOFFp2J2Af1nK" Content-Disposition: inline In-Reply-To: <559609.45978.qm@web62506.mail.re1.yahoo.com> X-PGP-Key: http://www.brixandersen.dk/files/HenrikBrixAndersen.asc User-Agent: Mutt/1.5.15 (2007-04-06) Subject: Re: Call for testers: New acpi_ibm driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 May 2007 23:48:04 -0000 --/NkBOFFp2J2Af1nK Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, May 10, 2007 at 12:53:10PM -0700, Peter Leham wrote: > I had to rebuild my IBM T60p laptop now I need a driver for > ACPI\IBM0068 any help would be greatly appciated Both acpi_ibm(4) in -CURRENT and RELENG_6 supports that: grep IBM0068 /usr/src/sys/dev/acpi_support/acpi_ibm.c static char *ibm_ids[] =3D {"IBM0057", "IBM0068", NULL}; Regards, Brix --=20 Henrik Brix Andersen --/NkBOFFp2J2Af1nK Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) Comment: GnuPG signed iD8DBQFGQ68xv+Q4flTiePgRArLaAJ9Q3luucLharprfDczAS70hvZe6DgCfcTa0 TamF3GkZ4NwJDyoaWCxH7MI= =V+OB -----END PGP SIGNATURE----- --/NkBOFFp2J2Af1nK-- From owner-freebsd-acpi@FreeBSD.ORG Sat May 12 18:51:06 2007 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 51F2116A403 for ; Sat, 12 May 2007 18:51:06 +0000 (UTC) (envelope-from amp@mybsd.org.my) Received: from tomoyo.MyBSD.org.my (tomoyo.mybsd.org.my [202.157.186.227]) by mx1.freebsd.org (Postfix) with ESMTP id 030A213C487 for ; Sat, 12 May 2007 18:51:04 +0000 (UTC) (envelope-from amp@mybsd.org.my) Received: from localhost (localhost [127.0.0.1]) by tomoyo.MyBSD.org.my (Postfix) with SMTP id 28E721148A for ; Sun, 13 May 2007 02:51:17 +0800 (MYT) Received: from sudirman073545 (unknown [60.48.117.226]) by tomoyo.MyBSD.org.my (Postfix) with ESMTP id 2356311466; Sun, 13 May 2007 02:50:46 +0800 (MYT) Message-ID: <001001c794c6$6abb1730$0401a8c0@sudirman073545> From: "Sudirman Ahmad" To: Date: Sun, 13 May 2007 02:50:28 +0800 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_000D_01C79509.76F59A00" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 X-DSPAM-Result: Innocent X-DSPAM-Processed: Sun May 13 02:51:16 2007 X-DSPAM-Confidence: 0.9955 X-DSPAM-Probability: 0.0000 X-DSPAM-Signature: 29,46460ca46177738254596 Cc: amp@mybsd.org.my Subject: ACPI problem on Acer Aspire 5570 (5572 NWXCi) X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 12 May 2007 18:51:06 -0000 This is a multi-part message in MIME format. ------=_NextPart_000_000D_01C79509.76F59A00 Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Content-Transfer-Encoding: 7bit Dear list, FYI I could not sent a acpidump file due it was more than 200kb. ----- Original Message ----- To: Cc: Sent: Saturday, 12 May, 2007 11:15 AM Subject: ACPI problem on Acer Aspire 5570 (5572 NWXCi) > Hello list, > > I'm having a problem or confict with acpi on my acer laptop especially > with > my NIC even when i plugged in a pcmcia NIC card. The FreeBSD-STABLE branch > that I'm using is latest cvs-up last night. > Attached is the necessary information for my system. > > > > > ps: please do cc me as i'm not subscribe to this list. > ------=_NextPart_000_000D_01C79509.76F59A00 Content-Type: text/plain; format=flowed; name="with_acpi.txt"; reply-type=original Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="with_acpi.txt" Copyright (c) 1992-2007 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD is a registered trademark of The FreeBSD Foundation.=0A= FreeBSD 6.2-STABLE #0: Sat May 12 02:28:07 MYT 2007=0A= root@:/usr/obj/usr/src/sys/GENERIC=0A= Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b7a000.=0A= Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b7a25c.=0A= MP Configuration Table version 1.4 found at 0xc009e571=0A= Table 'FACP' at 0x7f69ada0=0A= Table 'APIC' at 0x7f69ae94=0A= MADT: Found table at 0x7f69ae94=0A= APIC: Using the MADT enumerator.=0A= MADT: Found CPU APIC ID 0 ACPI ID 0: enabled=0A= MADT: Found CPU APIC ID 1 ACPI ID 1: enabled=0A= ACPI APIC Table: =0A= Calibrating clock(s) ... i8254 clock: 1193203 Hz=0A= CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A= Timecounter "i8254" frequency 1193182 Hz quality 0=0A= Calibrating TSC clock ... TSC clock: 1666791270 Hz=0A= CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1666.79-MHz = 686-class CPU)=0A= Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8=0A= = Features=3D0xbfe9fbff=0A= Features2=3D0xc189,>=0A= AMD Features=3D0x100000=0A= Cores per package: 2=0A= real memory =3D 2137587712 (2038 MB)=0A= Physical memory chunk(s):=0A= 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)=0A= 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0A= 0x0000000000c25000 - 0x000000007d269fff, 2086948864 bytes (509509 pages)=0A= avail memory =3D 2086797312 (1990 MB)=0A= bios32: Found BIOS32 Service Directory header at 0xc00f6610=0A= bios32: Entry =3D 0xfd460 (c00fd460) Rev =3D 0 Len =3D 1=0A= pcibios: PCI BIOS entry at 0xfd460+0x262=0A= pnpbios: Found PnP BIOS data at 0xc00f66b0=0A= pnpbios: Entry =3D f0000:acc3 Rev =3D 1.0=0A= Other BIOS signatures found:=0A= APIC: CPU 0 has ACPI ID 0=0A= MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000=0A= ioapic0: Changing APIC ID to 1=0A= ioapic0: Routing external 8259A's -> intpin 0=0A= MADT: Interrupt override: source 0, irq 2=0A= ioapic0: Routing IRQ 0 -> intpin 2=0A= MADT: Interrupt override: source 9, irq 9=0A= ioapic0: intpin 9 trigger: level=0A= lapic0: Routing NMI -> LINT1=0A= lapic0: LINT1 trigger: edge=0A= lapic0: LINT1 polarity: high=0A= lapic1: Routing NMI -> LINT1=0A= lapic1: LINT1 trigger: edge=0A= lapic1: LINT1 polarity: high=0A= ioapic0 irqs 0-23 on motherboard=0A= cpu0 BSP:=0A= ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A= lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff=0A= timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000=0A= wlan: <802.11 Link Layer>=0A= ath_rate: version 1.2 =0A= null: =0A= random: =0A= nfslock: pseudo-device=0A= io: =0A= kbd: new array size 4=0A= kbd1 at kbdmux0=0A= mem: =0A= Pentium Pro MTRR support enabled=0A= ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = RF5413)=0A= rr232x: RocketRAID 232x controller driver v1.02 (May 12 2007 02:27:55)=0A= npx0: INT 16 interface=0A= acpi0: on motherboard=0A= ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48=0A= acpi0: [MPSAFE]=0A= pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20=0A= pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A= pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D27a08086)=0A= pcibios: BIOS version 2.10=0A= acpi_bus_number: root bus has no _BBN, assuming 0=0A= acpi_bus_number: can't get _ADR=0A= acpi_bus_number: can't get _ADR=0A= AcpiOsDerivePciId: bus 0 dev 0 func 0=0A= acpi_bus_number: root bus has no _BBN, assuming 0=0A= acpi_bus_number: can't get _ADR=0A= acpi_bus_number: can't get _ADR=0A= AcpiOsDerivePciId: bus 0 dev 28 func 3=0A= acpi_bus_number: root bus has no _BBN, assuming 0=0A= acpi_bus_number: can't get _ADR=0A= acpi_bus_number: can't get _ADR=0A= AcpiOsDerivePciId: bus 0 dev 31 func 0=0A= acpi0: Power Button (fixed)=0A= acpi0: wakeup code va 0xda335000 pa 0x9d000=0A= unknown: I/O range not supported=0A= acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route = count_size=0A= Timecounter "HPET" frequency 14318180 Hz quality 2000=0A= ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10=0A= Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0A= acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0=0A= acpi_ec0: port 0x62,0x66 on acpi0=0A= pci_link0: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15=0A= Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A= pci_link1: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A= pci_link2: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A= pci_link3: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15=0A= Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A= pci_link4: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A= pci_link5: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A= pci_link6: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A= pci_link7: Index IRQ Rtd Ref IRQs=0A= Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A= After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A= cpu0: on acpi0=0A= acpi_throttle0: on cpu0=0A= acpi_throttle0: P_CNT from P_BLK 0x1010=0A= pcib0: port 0xcf8-0xcff on acpi0=0A= pci0: on pcib0=0A= pci0: physical bus=3D0=0A= found-> vendor=3D0x8086, dev=3D0x27a0, revid=3D0x03=0A= bus=3D0, slot=3D0, func=3D0=0A= class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= found-> vendor=3D0x8086, dev=3D0x27a2, revid=3D0x03=0A= bus=3D0, slot=3D2, func=3D0=0A= class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message=0A= map[10]: type 1, range 32, base d0300000, size 19, enabled=0A= map[14]: type 4, range 32, base 00001800, size 3, enabled=0A= map[18]: type 3, range 32, base c0000000, size 28, enabled=0A= map[1c]: type 1, range 32, base d0400000, size 18, enabled=0A= pcib0: matched entry for 0.2.INTA=0A= pcib0: slot 2 INTA hardwired to IRQ 16=0A= found-> vendor=3D0x8086, dev=3D0x27a6, revid=3D0x03=0A= bus=3D0, slot=3D2, func=3D1=0A= class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= powerspec 2 supports D0 D3 current D0=0A= map[10]: type 1, range 32, base d0380000, size 19, enabled=0A= found-> vendor=3D0x8086, dev=3D0x27d8, revid=3D0x02=0A= bus=3D0, slot=3D27, func=3D0=0A= class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D10=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message, 64 bit=0A= map[10]: type 1, range 64, base d0440000, size 14, enabled=0A= pcib0: matched entry for 0.27.INTA=0A= pcib0: slot 27 INTA hardwired to IRQ 22=0A= found-> vendor=3D0x8086, dev=3D0x27d0, revid=3D0x02=0A= bus=3D0, slot=3D28, func=3D0=0A= class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A= cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message=0A= pcib0: matched entry for 0.28.INTA=0A= pcib0: slot 28 INTA hardwired to IRQ 16=0A= found-> vendor=3D0x8086, dev=3D0x27d2, revid=3D0x02=0A= bus=3D0, slot=3D28, func=3D1=0A= class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A= cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Db, irq=3D11=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message=0A= pcib0: matched entry for 0.28.INTB=0A= pcib0: slot 28 INTB hardwired to IRQ 17=0A= found-> vendor=3D0x8086, dev=3D0x27d4, revid=3D0x02=0A= bus=3D0, slot=3D28, func=3D2=0A= class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A= cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Dc, irq=3D10=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message=0A= pcib0: matched entry for 0.28.INTC=0A= pcib0: slot 28 INTC hardwired to IRQ 18=0A= found-> vendor=3D0x8086, dev=3D0x27c8, revid=3D0x02=0A= bus=3D0, slot=3D29, func=3D0=0A= class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= map[20]: type 4, range 32, base 00001820, size 5, enabled=0A= pcib0: matched entry for 0.29.INTA=0A= pcib0: slot 29 INTA hardwired to IRQ 23=0A= found-> vendor=3D0x8086, dev=3D0x27c9, revid=3D0x02=0A= bus=3D0, slot=3D29, func=3D1=0A= class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Db, irq=3D10=0A= map[20]: type 4, range 32, base 00001840, size 5, enabled=0A= pcib0: matched entry for 0.29.INTB=0A= pcib0: slot 29 INTB hardwired to IRQ 19=0A= found-> vendor=3D0x8086, dev=3D0x27ca, revid=3D0x02=0A= bus=3D0, slot=3D29, func=3D2=0A= class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Dc, irq=3D10=0A= map[20]: type 4, range 32, base 00001860, size 5, enabled=0A= pcib0: matched entry for 0.29.INTC=0A= pcib0: slot 29 INTC hardwired to IRQ 18=0A= found-> vendor=3D0x8086, dev=3D0x27cb, revid=3D0x02=0A= bus=3D0, slot=3D29, func=3D3=0A= class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Dd, irq=3D11=0A= map[20]: type 4, range 32, base 00001880, size 5, enabled=0A= pcib0: matched entry for 0.29.INTD=0A= pcib0: slot 29 INTD hardwired to IRQ 16=0A= found-> vendor=3D0x8086, dev=3D0x27cc, revid=3D0x02=0A= bus=3D0, slot=3D29, func=3D7=0A= class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= powerspec 2 supports D0 D3 current D0=0A= map[10]: type 1, range 32, base d0644000, size 10, enabled=0A= pcib0: matched entry for 0.29.INTA=0A= pcib0: slot 29 INTA hardwired to IRQ 23=0A= found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0xe2=0A= bus=3D0, slot=3D30, func=3D0=0A= class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0=0A= cmdreg=3D0x0004, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A= found-> vendor=3D0x8086, dev=3D0x27b9, revid=3D0x02=0A= bus=3D0, slot=3D31, func=3D0=0A= class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= found-> vendor=3D0x8086, dev=3D0x27c4, revid=3D0x02=0A= bus=3D0, slot=3D31, func=3D2=0A= class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0005, statreg=3D0x02b0, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Db, irq=3D255=0A= powerspec 2 supports D0 D3 current D0=0A= map[20]: type 4, range 32, base 000018b0, size 4, enabled=0A= found-> vendor=3D0x8086, dev=3D0x27da, revid=3D0x02=0A= bus=3D0, slot=3D31, func=3D3=0A= class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Db, irq=3D10=0A= map[20]: type 4, range 32, base 000018c0, size 5, enabled=0A= pcib0: matched entry for 0.31.INTB=0A= pcib0: slot 31 INTB hardwired to IRQ 19=0A= agp0: port 0x1800-0x1807 = mem 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0400000-0xd043ffff = irq 16 at device 2.0 on pci0=0A= agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0300000=0A= agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0300000=0A= agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0400000=0A= agp0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000=0A= agp0: detected 7932k stolen memory=0A= agp0: aperture size is 256M=0A= pci0: at device 2.1 (no driver attached)=0A= pci0: at device 27.0 (no driver attached)=0A= pcib1: irq 16 at device 28.0 on pci0=0A= pcib1: secondary bus 2=0A= pcib1: subordinate bus 2=0A= pcib1: I/O decode 0x0-0x0=0A= pcib1: memory decode 0x0-0x0=0A= pcib1: prefetched decode 0x0-0x0=0A= pci2: on pcib1=0A= pci2: physical bus=3D2=0A= found-> vendor=3D0x11ab, dev=3D0x4352, revid=3D0x14=0A= bus=3D2, slot=3D0, func=3D0=0A= class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0000, statreg=3D0x4010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= powerspec 2 supports D0 D1 D2 D3 current D0=0A= MSI supports 2 messages, 64 bit=0A= map[10]: type 1, range 64, base 00000000, size 14, memory disabled=0A= map[18]: type 4, range 32, base 00000000, size 8, port disabled=0A= pcib1: matched entry for 2.0.INTA=0A= pcib1: slot 0 INTA hardwired to IRQ 16=0A= mskc0: irq 16 at device 0.0 on = pci2=0A= pcib1: mskc0 requested unsupported memory range 0x0-0xffffffff (decoding = 0x0-0x0, 0x0-0x0)=0A= mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).=0A= mskc0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x1000=0A= mskc0: unknown device: id=3D0xff, rev=3D0x0f=0A= device_attach: mskc0 attach returned 6=0A= pcib2: irq 17 at device 28.1 on pci0=0A= pcib2: secondary bus 3=0A= pcib2: subordinate bus 3=0A= pcib2: I/O decode 0x0-0x0=0A= pcib2: memory decode 0x0-0x0=0A= pcib2: prefetched decode 0x0-0x0=0A= pci3: on pcib2=0A= pci3: physical bus=3D3=0A= found-> vendor=3D0x8086, dev=3D0x4222, revid=3D0x02=0A= bus=3D3, slot=3D0, func=3D0=0A= class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0=0A= cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A= intpin=3Da, irq=3D11=0A= powerspec 2 supports D0 D3 current D0=0A= MSI supports 1 message, 64 bit=0A= map[10]: type 1, range 32, base 00000000, size 12, memory disabled=0A= pcib2: matched entry for 3.0.INTA=0A= pcib2: slot 0 INTA hardwired to IRQ 17=0A= pci3: at device 0.0 (no driver attached)=0A= pcib3: irq 18 at device 28.2 on pci0=0A= pcib3: secondary bus 4=0A= pcib3: subordinate bus 4=0A= pcib3: I/O decode 0x0-0x0=0A= pcib3: memory decode 0x0-0x0=0A= pcib3: prefetched decode 0x0-0x0=0A= pci4: on pcib3=0A= pci4: physical bus=3D4=0A= uhci0: port 0x1820-0x183f irq 23 at = device 29.0 on pci0=0A= uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820=0A= ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49=0A= uhci0: [GIANT-LOCKED]=0A= usb0: on uhci0=0A= usb0: USB revision 1.0=0A= uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub0: 2 ports with 2 removable, self powered=0A= uhci1: port 0x1840-0x185f irq 19 at = device 29.1 on pci0=0A= uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840=0A= ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50=0A= uhci1: [GIANT-LOCKED]=0A= usb1: on uhci1=0A= usb1: USB revision 1.0=0A= uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub1: 2 ports with 2 removable, self powered=0A= uhci2: port 0x1860-0x187f irq 18 at = device 29.2 on pci0=0A= uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860=0A= ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51=0A= uhci2: [GIANT-LOCKED]=0A= usb2: on uhci2=0A= usb2: USB revision 1.0=0A= uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub2: 2 ports with 2 removable, self powered=0A= uhci3: port 0x1880-0x189f irq 16 at = device 29.3 on pci0=0A= uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880=0A= ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52=0A= uhci3: [GIANT-LOCKED]=0A= usb3: on uhci3=0A= usb3: USB revision 1.0=0A= uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub3: 2 ports with 2 removable, self powered=0A= ehci0: mem = 0xd0644000-0xd06443ff irq 23 at device 29.7 on pci0=0A= ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0644000=0A= ehci0: [GIANT-LOCKED]=0A= usb4: EHCI version 1.0=0A= usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0A= usb4: on ehci0=0A= usb4: USB revision 2.0=0A= uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0A= uhub4: 8 ports with 8 removable, self powered=0A= pcib4: at device 30.0 on pci0=0A= pcib4: secondary bus 10=0A= pcib4: subordinate bus 11=0A= pcib4: I/O decode 0x0-0x0=0A= pcib4: memory decode 0x0-0x0=0A= pcib4: prefetched decode 0x0-0x0=0A= pcib4: Subtractively decoded bridge.=0A= pci10: on pcib4=0A= pci10: physical bus=3D10=0A= found-> vendor=3D0x104c, dev=3D0x8039, revid=3D0x00=0A= bus=3D10, slot=3D9, func=3D0=0A= class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1=0A= cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x31 (1470 ns), mingnt=3D0x44 (17000 ns), maxlat=3D0x03 (750 = ns)=0A= intpin=3Da, irq=3D10=0A= powerspec 2 supports D0 D1 D2 D3 current D0=0A= map[10]: type 1, range 32, base d0204000, size 12, memory disabled=0A= pcib4: requested memory range 0xd0204000-0xd0204fff: good=0A= pcib4: matched entry for 10.9.INTA=0A= pcib4: slot 9 INTA hardwired to IRQ 20=0A= found-> vendor=3D0x104c, dev=3D0x803b, revid=3D0x00=0A= bus=3D10, slot=3D9, func=3D2=0A= class=3D01-80-00, hdrtype=3D0x00, mfdev=3D1=0A= cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0A= lattimer=3D0x39 (1710 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x04 (1000 = ns)=0A= intpin=3Da, irq=3D10=0A= powerspec 2 supports D0 D1 D2 D3 current D0=0A= map[10]: type 1, range 32, base d0205000, size 12, enabled=0A= pcib4: requested memory range 0xd0205000-0xd0205fff: good=0A= pcib4: matched entry for 10.9.INTA=0A= pcib4: slot 9 INTA hardwired to IRQ 20=0A= cbb0: mem 0xd0204000-0xd0204fff irq 20 at device = 9.0 on pci10=0A= cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0204000=0A= cardbus0: on cbb0=0A= pccard0: <16-bit PCCard bus> on cbb0=0A= ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53=0A= cbb0: [MPSAFE]=0A= cbb0: PCI Configuration space:=0A= 0x00: 0x8039104c 0x02100007 0x06070000 0x00823110 =0A= 0x10: 0xd0204000 0x020000a0 0x200b0b0a 0xfffff000 =0A= 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc =0A= 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114 =0A= 0x40: 0x01101025 0x00000001 0x00000000 0x00000000 =0A= 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0x80: 0x1844d060 0x02d80019 0x00190016 0x01321b22 =0A= 0x90: 0x606602c0 0x00000000 0x00000000 0x00000000 =0A= 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 =0A= 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A= 0xf0: 0x7a923035 0x0f00174f 0x00000000 0x00000000 =0A= pci10: at device 9.2 (no driver attached)=0A= isab0: at device 31.0 on pci0=0A= isa0: on isab0=0A= atapci0: port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0=0A= atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0=0A= ata0: on atapci0=0A= atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0=0A= atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6=0A= ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00=0A= ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A= ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A= ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1=0A= ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54=0A= ata0: [MPSAFE]=0A= ata1: on atapci0=0A= atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0A= atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0A= ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01=0A= ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0A= ata1: stat1=3D0x01 err=3D0x04 lsb=3D0x00 msb=3D0x00=0A= ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4=0A= ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55=0A= ata1: [MPSAFE]=0A= pci0: at device 31.3 (no driver attached)=0A= acpi_acad0: on acpi0=0A= battery0: on acpi0=0A= acpi_lid0: on acpi0=0A= acpi_button0: on acpi0=0A= acpi_button1: on acpi0=0A= acpi_tz0: on acpi0=0A= atkbdc0: port 0x60,0x64 irq 1 on acpi0=0A= atkbd0: irq 1 on atkbdc0=0A= atkbd: the current kbd controller command byte 0047=0A= atkbd: keyboard ID 0x41ab (2)=0A= kbd0 at atkbd0=0A= kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000=0A= ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56=0A= atkbd0: [GIANT-LOCKED]=0A= psm0: unable to allocate IRQ=0A= psmcpnp0: irq 12 on acpi0=0A= psm0: current command byte:0047=0A= psm0: irq 12 on atkbdc0=0A= ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57=0A= psm0: [GIANT-LOCKED]=0A= psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons=0A= psm0: config:00000000, flags:00000008, packet size:3=0A= psm0: syncmask:c0, syncbits:00=0A= unknown: status reg test failed ff=0A= unknown: status reg test failed ff=0A= unknown: status reg test failed ff=0A= unknown: status reg test failed ff=0A= unknown: status reg test failed ff=0A= unknown: status reg test failed ff=0A= ex_isa_identify()=0A= ata: ata0 already exists; skipping it=0A= ata: ata1 already exists; skipping it=0A= atkbdc: atkbdc0 already exists; skipping it=0A= pnp_identify: Trying Read_Port at 203=0A= pnp_identify: Trying Read_Port at 243=0A= pnp_identify: Trying Read_Port at 283=0A= pnp_identify: Trying Read_Port at 2c3=0A= pnp_identify: Trying Read_Port at 303=0A= pnp_identify: Trying Read_Port at 343=0A= pnp_identify: Trying Read_Port at 383=0A= pnp_identify: Trying Read_Port at 3c3=0A= PNP Identify complete=0A= sc: sc0 already exists; skipping it=0A= vga: vga0 already exists; skipping it=0A= isa_probe_children: disabling PnP devices=0A= isa_probe_children: probing non-PnP devices=0A= pmtimer0 on isa0=0A= orm0: at iomem 0xdf800-0xdffff on isa0=0A= adv0: not probed (disabled)=0A= aha0: not probed (disabled)=0A= aic0: not probed (disabled)=0A= bt0: not probed (disabled)=0A= cs0: not probed (disabled)=0A= ed0: not probed (disabled)=0A= fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A= fe0: not probed (disabled)=0A= ie0: not probed (disabled)=0A= lnc0: not probed (disabled)=0A= ppc0: parallel port not found.=0A= ppc0: failed to probe at irq 7 on isa0=0A= sc0: at flags 0x100 on isa0=0A= sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)=0A= sio0: configured irq 4 not in bitmap of probed irqs 0=0A= sio0: port may not be enabled=0A= sio0: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01=0A= sio0: probe failed test(s): 0 1 2 4 6 7 9=0A= sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A= sio0: type 8250 or not responding=0A= ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58=0A= sio1: configured irq 3 not in bitmap of probed irqs 0=0A= sio1: port may not be enabled=0A= sio1: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01=0A= sio1: probe failed test(s): 0 1 2 4 6 7 9=0A= sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0=0A= sio2: not probed (disabled)=0A= sio3: not probed (disabled)=0A= sn0: not probed (disabled)=0A= vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A= vt0: not probed (disabled)=0A= isa_probe_children: probing PnP devices=0A= ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1=0A= ums0: 3 buttons and Z dir.=0A= Device configuration finished.=0A= Reducing kern.maxvnodes 133772 -> 100000=0A= procfs registered=0A= lapic: Divisor 2, Frequency 83339553 hz=0A= Timecounter "TSC" frequency 1666791270 Hz quality 800=0A= Timecounters tick every 1.000 msec=0A= lo0: bpf attached=0A= rr232x: no controller detected.=0A= acpi_acad0: acline initialization start=0A= acpi_acad0: On Line=0A= acpi_acad0: acline initialization done, tried 1 times=0A= battery0: battery initialization start=0A= battery0: battery initialization done, tried 1 times=0A= ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0A= ad0: 76319MB at ata0-master SATA150=0A= ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth = queue=0A= GEOM: new disk ad0=0A= ad0: Intel check1 failed=0A= ad0: Adaptec check1 failed=0A= ad0: LSI (v3) check1 failed=0A= ad0: LSI (v2) check1 failed=0A= ad0: FreeBSD check1 failed=0A= ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire=0A= acd0: CDRW drive at ata1 as master=0A= acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, = UDMA33=0A= acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet=0A= acd0: Writes: CDR, CDRW, test write, burnproof=0A= acd0: Audio: play, 256 volume levels=0A= acd0: Mechanism: ejectable tray, unlocked=0A= acd0: Medium: CD-R 120mm photo disc=0A= ATA PseudoRAID loaded=0A= Trying to mount root from ufs:/dev/ad0s2a=0A= start_init: trying /sbin/init=0A= ------=_NextPart_000_000D_01C79509.76F59A00 Content-Type: text/plain; format=flowed; name="no_acpi.txt"; reply-type=original Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="no_acpi.txt" Copyright (c) 1992-2007 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD is a registered trademark of The FreeBSD Foundation.=0A= FreeBSD 6.2-STABLE #0: Sat May 12 02:28:07 MYT 2007=0A= root@:/usr/obj/usr/src/sys/GENERIC=0A= MPTable: =0A= Timecounter "i8254" frequency 1193182 Hz quality 0=0A= CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1666.80-MHz = 686-class CPU)=0A= Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8=0A= = Features=3D0xbfe9fbff=0A= Features2=3D0xc189,>=0A= AMD Features=3D0x100000=0A= Cores per package: 2=0A= real memory =3D 2137587712 (2038 MB)=0A= avail memory =3D 2086813696 (1990 MB)=0A= ioapic0: Assuming intbase of 0=0A= ioapic0 irqs 0-23 on motherboard=0A= kbd1 at kbdmux0=0A= ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = RF5413)=0A= cpu0 on motherboard=0A= pcib0: pcibus 0 on motherboard=0A= pci0: on pcib0=0A= agp0: port 0x1800-0x1807 = mem 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0400000-0xd043ffff = irq 16 at device 2.0 on pci0=0A= agp0: detected 7932k stolen memory=0A= agp0: aperture size is 256M=0A= pci0: at device 2.1 (no driver attached)=0A= pci0: at device 27.0 (no driver attached)=0A= pcib1: irq 16 at device 28.0 on pci0=0A= pci2: on pcib1=0A= mskc0: port 0x2000-0x20ff mem = 0xd0000000-0xd0003fff irq 16 at device 0.0 on pci2=0A= msk0: on mskc0=0A= msk0: Ethernet address: 00:16:36:c7:92:76=0A= miibus0: on msk0=0A= e1000phy0: on miibus0=0A= e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A= ukphy0: on miibus0=0A= ukphy0: no media present=0A= ukphy1: on miibus0=0A= ukphy1: no media present=0A= mskc0: [FAST]=0A= pcib2: irq 17 at device 28.1 on pci0=0A= pci3: on pcib2=0A= pci3: at device 0.0 (no driver attached)=0A= pcib3: irq 18 at device 28.2 on pci0=0A= pci4: on pcib3=0A= pcib4: irq 19 at device 28.3 on pci0=0A= pci5: on pcib4=0A= uhci0: port 0x1820-0x183f irq 23 at = device 29.0 on pci0=0A= uhci0: [GIANT-LOCKED]=0A= usb0: on uhci0=0A= usb0: USB revision 1.0=0A= uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub0: 2 ports with 2 removable, self powered=0A= uhci1: port 0x1840-0x185f irq 19 at = device 29.1 on pci0=0A= uhci1: [GIANT-LOCKED]=0A= usb1: on uhci1=0A= usb1: USB revision 1.0=0A= uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub1: 2 ports with 2 removable, self powered=0A= uhci2: port 0x1860-0x187f irq 18 at = device 29.2 on pci0=0A= uhci2: [GIANT-LOCKED]=0A= usb2: on uhci2=0A= usb2: USB revision 1.0=0A= uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub2: 2 ports with 2 removable, self powered=0A= uhci3: port 0x1880-0x189f irq 16 at = device 29.3 on pci0=0A= uhci3: [GIANT-LOCKED]=0A= usb3: on uhci3=0A= usb3: USB revision 1.0=0A= uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub3: 2 ports with 2 removable, self powered=0A= ehci0: mem = 0xd0644000-0xd06443ff irq 23 at device 29.7 on pci0=0A= ehci0: [GIANT-LOCKED]=0A= usb4: EHCI version 1.0=0A= usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0A= usb4: on ehci0=0A= usb4: USB revision 2.0=0A= uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0A= uhub4: 8 ports with 8 removable, self powered=0A= pcib5: at device 30.0 on pci0=0A= pci10: on pcib5=0A= cbb0: mem 0xd0204000-0xd0204fff irq 20 at device = 9.0 on pci10=0A= cardbus0: on cbb0=0A= pccard0: <16-bit PCCard bus> on cbb0=0A= pci10: at device 9.2 (no driver attached)=0A= isab0: at device 31.0 on pci0=0A= isa0: on isab0=0A= atapci0: port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0=0A= ata0: on atapci0=0A= ata1: on atapci0=0A= pci0: at device 31.3 (no driver attached)=0A= pmtimer0 on isa0=0A= orm0: at iomem 0xdf800-0xdffff on isa0=0A= atkbdc0: at port 0x60,0x64 on isa0=0A= atkbd0: irq 1 on atkbdc0=0A= kbd0 at atkbd0=0A= atkbd0: [GIANT-LOCKED]=0A= psm0: irq 12 on atkbdc0=0A= psm0: [GIANT-LOCKED]=0A= psm0: model Generic PS/2 mouse, device ID 0=0A= ppc0: parallel port not found.=0A= sc0: at flags 0x100 on isa0=0A= sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= sio0: configured irq 4 not in bitmap of probed irqs 0=0A= sio0: port may not be enabled=0A= sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A= sio0: type 8250 or not responding=0A= sio1: configured irq 3 not in bitmap of probed irqs 0=0A= sio1: port may not be enabled=0A= vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A= unknown: can't assign resources (port)=0A= unknown: can't assign resources (memory)=0A= unknown: can't assign resources (memory)=0A= unknown: can't assign resources (memory)=0A= unknown: can't assign resources (irq)=0A= ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1=0A= ums0: 3 buttons and Z dir.=0A= Timecounter "TSC" frequency 1666799550 Hz quality 800=0A= Timecounters tick every 1.000 msec=0A= ad0: 76319MB at ata0-master SATA150=0A= acd0: CDRW at ata1-master UDMA33=0A= Trying to mount root from ufs:/dev/ad0s2a=0A= ------=_NextPart_000_000D_01C79509.76F59A00 Content-Type: text/plain; format=flowed; name="sysctl_hw.acpi.txt"; reply-type=original Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="sysctl_hw.acpi.txt" hw.acpi.supported_sleep_state: S3 S4 S5=0A= hw.acpi.power_button_state: S5=0A= hw.acpi.sleep_button_state: S3=0A= hw.acpi.lid_switch_state: NONE=0A= hw.acpi.standby_state: S1=0A= hw.acpi.suspend_state: S3=0A= hw.acpi.sleep_delay: 1=0A= hw.acpi.s4bios: 0=0A= hw.acpi.verbose: 1=0A= hw.acpi.disable_on_reboot: 0=0A= hw.acpi.handle_reboot: 0=0A= hw.acpi.reset_video: 0=0A= hw.acpi.cpu.cx_lowest: C1=0A= hw.acpi.acline: 1=0A= hw.acpi.battery.life: 100=0A= hw.acpi.battery.time: -1=0A= hw.acpi.battery.state: 0=0A= hw.acpi.battery.units: 1=0A= hw.acpi.battery.info_expire: 5=0A= hw.acpi.thermal.min_runtime: 0=0A= hw.acpi.thermal.polling_rate: 10=0A= hw.acpi.thermal.user_override: 0=0A= hw.acpi.thermal.tz0.temperature: 66.0C=0A= hw.acpi.thermal.tz0.active: -1=0A= hw.acpi.thermal.tz0.passive_cooling: 1=0A= hw.acpi.thermal.tz0.thermal_flags: 0=0A= hw.acpi.thermal.tz0._PSV: 99.0C=0A= hw.acpi.thermal.tz0._HOT: -1=0A= hw.acpi.thermal.tz0._CRT: 105.0C=0A= hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1=0A= ------=_NextPart_000_000D_01C79509.76F59A00--