From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 4 11:06:51 2008 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 547771065675 for ; Mon, 4 Aug 2008 11:06:51 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 0B6C88FC25 for ; Mon, 4 Aug 2008 11:06:51 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m74B6okG081976 for ; Mon, 4 Aug 2008 11:06:50 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m74B6oZF081972 for freebsd-acpi@FreeBSD.org; Mon, 4 Aug 2008 11:06:50 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 4 Aug 2008 11:06:50 GMT Message-Id: <200808041106.m74B6oZF081972@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-acpi@FreeBSD.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 Aug 2008 11:06:51 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/81000 acpi [apic] Via 8235 sound card worked great with FreeBSD 5 s kern/91038 acpi [panic] [ata] [acpi] 6.0-RELEASE on Fujitsu Siemens Am s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker o kern/108954 acpi [acpi] 'sleep(1)' sleeps >1 seconds when speedstep (Cx o i386/114562 acpi [acpi] cardbus is dead after s3 on Thinkpad T43 with a o kern/116939 acpi [acpi] PCI-to-PCI misconfigured for bus three and can o kern/118973 acpi [acpi]: Kernel panic with acpi boot o kern/119200 acpi [acpi] Lid close switch suspends CPU for 1 second on H o kern/119356 acpi [acpi]: i386 ACPI wakeup not work due resource exhaust o kern/120953 acpi [acpi]: FreeBSD 6.3 Release: acpi_tz0: _TMP value is f kern/121454 acpi [pst] Promise SuperTrak SX6000 does not load during bo 19 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- f kern/67309 acpi zzz reboot computer (ACPI S3) o i386/69750 acpi Boot without ACPI failed on ASUS L5 s kern/73823 acpi [request] acpi / power-on by timer support o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys o i386/83018 acpi [install] Installer will not boot on Asus P4S8X BIOS 1 o kern/89411 acpi [acpi] acpiconf bug s kern/90243 acpi Laptop fan doesn't turn off (ACPI enabled) (Packard Be o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108581 acpi [sysctl] sysctl: hw.acpi.cpu.cx_lowest: Invalid argume o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in s kern/112544 acpi [acpi] [patch] Add High Precision Event Timer Driver f o kern/114165 acpi [acpi] Dell C810 - ACPI problem o kern/117605 acpi [acpi] [request] add debug.cpufreq.highest o kern/120515 acpi [acpi] [patch] acpi_alloc_wakeup_handler: can't alloc o kern/121102 acpi [acpi_fujitsu] [patch] update acpi_fujitsu for the P80 o kern/121504 acpi [patch] Correctly set hw.acpi.osname on certain machin f amd64/122521 acpi ACPI Error after upgrade to 7.0 o kern/123039 acpi [acpi] ACPI AML_BUFFER_LIMIT errors during boot o kern/124223 acpi [acpi] [patch] acpi_battery.c -- Notify user-defined c o kern/124412 acpi [acpi] power off error on Toshiba M40 laptop o kern/124744 acpi [acpi] [patch] incorrect _BST result validation for To 24 problems total. From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 5 15:48:49 2008 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2D01C106566B for ; Tue, 5 Aug 2008 15:48:49 +0000 (UTC) (envelope-from billp@menitech.co.uk) Received: from mk-filter-3-a-3.mail.uk.tiscali.com (mk-filter-3-a-3.mail.uk.tiscali.com [212.74.100.46]) by mx1.freebsd.org (Postfix) with ESMTP id 3D4BD8FC08 for ; Tue, 5 Aug 2008 15:48:45 +0000 (UTC) (envelope-from billp@menitech.co.uk) X-Trace: 54185919/mk-filter-3.mail.uk.tiscali.com/B2B/$b2b-THROTTLED-DYNAMIC/b2b-CUSTOMER-DYNAMIC-IP/88.111.209.58 X-SBRS: None X-RemoteIP: 88.111.209.58 X-IP-MAIL-FROM: billp@menitech.co.uk X-IP-BHB: Once X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: AlgMAIoMmEhYb9E6/2dsb2JhbACBWIkaoz8 X-IronPort-AV: E=Sophos;i="4.31,310,1215385200"; d="boot'?scan'208";a="54185919" Received: from 88-111-209-58.dynamic.dsl.as9105.com (HELO ditsum.menitech.co.uk) ([88.111.209.58]) by smtp.tiscali-business.co.uk with ESMTP; 05 Aug 2008 16:19:18 +0100 Message-ID: <48987127.5080902@menitech.co.uk> Date: Tue, 05 Aug 2008 16:26:31 +0100 From: Bill Petheram User-Agent: Thunderbird 2.0.0.16 (X11/20080731) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org Content-Type: multipart/mixed; boundary="------------040504090904000406040409" Subject: /dev/psm0 mouse device not created X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 Aug 2008 15:48:49 -0000 This is a multi-part message in MIME format. --------------040504090904000406040409 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, I am running FreeBSD 7.0 - RELEASE on an Abit IP35 Pro motherboard, a Phoenix Award BIOS, a JMicron V01.06.69 message is also displayed. but I am unable to get the mouse working. I keep getting:- psm0: unable to allocate IRQ Any help gratefully received. If I try to boot without ACPI no disks are found. thanks Bill Here is output from sysctl hw.acpi hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: -273.2C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 75.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 85.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 Here is /var/run/dmesg.boot. I used boot -v Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000. Calibrating clock(s) ... i8254 clock: 1193341 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3204012006 Hz CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3204.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 4 usable memory = 2133549056 (2034 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000cc5000 - 0x000000007c297fff, 2069704704 bytes (505299 pages) avail memory = 2058874880 (1963 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 3 APIC: CPU 2 has ACPI ID 1 APIC: CPU 3 has ACPI ID 2 ACPI: RSDP @ 0x0xf7860/0x0014 (v 0 IntelR) ACPI: RSDT @ 0x0x7fee3000/0x0034 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x7fee3080/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x7fee3100/0x4D0B (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x7fee0000/0x0040 ACPI: MCFG @ 0x0x7fee7f00/0x003C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x7fee7e40/0x0084 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: SSDT @ 0x0x7fee8860/0x0380 (v 1 PmRef CpuPm 0x00003000 INTL 0x20041203) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: edge lapic3: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x0f000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.PEX4.JMB0.CF40 -> bus 3 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 5 7 9 10 11 12 Validation 0 10 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 9 10 11 12 Validation 0 255 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 9 10 11 12 Validation 0 11 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 9 10 11 12 Validation 0 11 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 9 10 11 12 Validation 0 255 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 5 7 9 10 11 12 Validation 0 4 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 4 5 7 9 10 11 12 Validation 0 5 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 5 7 9 10 11 12 Validation 0 7 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est3 attach returned 6 p4tcc3: on cpu3 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x29c0, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29c1, revid=0x02 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2937, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=4 map[20]: type I/O Port, range 32, base 0xfe00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2939, revid=0x02 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0xfd00, size 5, enabled pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x293c, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff000, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293e, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdff8000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2948, revid=0x02 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2934, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[20]: type I/O Port, range 32, base 0xfc00, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xfb00, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0xfa00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293a, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfdffe000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x92 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2916, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2920, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf900, size 3, enabled map[14]: type I/O Port, range 32, base 0xf800, size 2, enabled map[18]: type I/O Port, range 32, base 0xf700, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf600, size 2, enabled map[20]: type I/O Port, range 32, base 0xf500, size 4, enabled map[24]: type I/O Port, range 32, base 0xf400, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type Memory, range 64, base 0xfdffd000, size 8, enabled map[20]: type I/O Port, range 32, base 0x500, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2926, revid=0x02 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf200, size 3, enabled map[14]: type I/O Port, range 32, base 0xf100, size 2, enabled map[18]: type I/O Port, range 32, base 0xf000, size 3, enabled map[1c]: type I/O Port, range 32, base 0xef00, size 2, enabled map[20]: type I/O Port, range 32, base 0xee00, size 4, enabled map[24]: type I/O Port, range 32, base 0xed00, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 19 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xf8000000-0xfbffffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0611, revid=0xa2 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled pcib1: requested memory range 0xf8000000-0xf9ffffff: good map[24]: type I/O Port, range 32, base 0xaf00, size 7, enabled pcib1: requested I/O range 0xaf00-0xaf7f: in range pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0xaf00-0xaf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1 uhci0: port 0xff00-0xff1f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xfd00-0xfd1f irq 19 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdfff000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfda00000-0xfdafffff pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: at device 28.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfd900000-0xfd9fffff pcib3: prefetched decode 0xfde00000-0xfdefffff pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x197b, dev=0x2363, revid=0x02 domain=0, bus=3, slot=0, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled pcib3: requested I/O range 0xcf00-0xcf07: in range map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled pcib3: requested I/O range 0xce00-0xce03: in range map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled pcib3: requested I/O range 0xcd00-0xcd07: in range map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled pcib3: requested I/O range 0xcc00-0xcc03: in range map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled pcib3: requested I/O range 0xcb00-0xcb0f: in range map[24]: type Memory, range 32, base 0xfd9fe000, size 13, enabled pcib3: requested memory range 0xfd9fe000-0xfd9fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 atapci0: port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfd9fe000-0xfd9fffff irq 16 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfd9fe000 atapci0: AHCI called from vendor specific driver atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: on atapci0 ata2: SATA connect status=00000000 ata2: ahci_reset devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: SATA connect status=00000000 ata3: ahci_reset devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcf00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xce00 ata4: reset tp1 mask=03 ostat0=60 ostat1=70 ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata4: reset tp2 stat0=20 stat1=30 devices=0x0 ata4: [MPSAFE] ata4: [ITHREAD] uhci3: port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfa00 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: on uhci5 usb6: USB revision 1.0 uhub6: on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffe000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: on ehci1 usb7: USB revision 2.0 uhub7: on usb7 uhub7: 6 ports with 6 removable, self powered pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0xfdc00000-0xfdcfffff pcib4: prefetched decode 0xfdb00000-0xfdbfffff pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbe00, size 8, enabled pcib4: requested I/O range 0xbe00-0xbeff: in range map[14]: type Memory, range 32, base 0xfdcff000, size 8, enabled pcib4: requested memory range 0xfdcff000-0xfdcff0ff: good pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 23 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=4, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled pcib4: requested I/O range 0xbc00-0xbcff: in range map[14]: type Memory, range 32, base 0xfdcfe000, size 8, enabled pcib4: requested memory range 0xfdcfe000-0xfdcfe0ff: good pcib4: matched entry for 4.1.INTA pcib4: slot 1 INTA hardwired to IRQ 22 found-> vendor=0x104c, dev=0x8023, revid=0x00 domain=0, bus=4, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x44 (2040 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdcfd000, size 11, enabled pcib4: requested memory range 0xfdcfd000-0xfdcfd7ff: good map[14]: type Memory, range 32, base 0xfdcf8000, size 14, enabled pcib4: requested memory range 0xfdcf8000-0xfdcfbfff: good pcib4: matched entry for 4.2.INTA pcib4: slot 2 INTA hardwired to IRQ 21 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbe00 pcib4: re0 requested I/O range 0xbe00-0xbeff: in range re0: port 0xbe00-0xbeff mem 0xfdcff000-0xfdcff0ff irq 23 at device 0.0 on pci4 pcib4: re0 requested I/O range 0xbe00-0xbeff: in range miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:50:8d:bd:81:4d re0: [MPSAFE] re0: [FILTER] re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00 pcib4: re1 requested I/O range 0xbc00-0xbcff: in range re1: port 0xbc00-0xbcff mem 0xfdcfe000-0xfdcfe0ff irq 22 at device 1.0 on pci4 pcib4: re1 requested I/O range 0xbc00-0xbcff: in range miibus1: on re1 rgephy1: PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: bpf attached re1: Ethernet address: 00:50:8d:bd:81:4e ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54 re1: [MPSAFE] re1: [FILTER] fwohci0: mem 0xfdcfd000-0xfdcfd7ff,0xfdcf8000-0xfdcfbfff irq 21 at device 2.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdcfd000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:50:8d:00:00:b8:3a:a2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x27cc000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:50:8d:b8:3a:a2 fwe0: bpf attached fwe0: Ethernet address: 02:50:8d:b8:3a:a2 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:50:8d:00:00:b8:3a:a2 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f,0xf400-0xf40f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf500 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf400 ata5: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf900 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf800 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf700 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf600 ata6: reset tp1 mask=03 ostat0=00 ostat1=50 ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata6: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=00 stat1=50 devices=0x6 ata6: [MPSAFE] ata6: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci2: port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f,0xed00-0xed0f irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xee00 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xed00 ata7: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf200 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf100 ata7: reset tp1 mask=03 ostat0=7f ostat1=7f ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff ata7: reset tp2 stat0=ff stat1=ff devices=0x0 ata7: [MPSAFE] ata7: [ITHREAD] ata8: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf000 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xef00 ata8: reset tp1 mask=03 ostat0=7f ostat1=7f ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff ata8: reset tp2 stat0=ff stat1=ff devices=0x0 ata8: [MPSAFE] ata8: [ITHREAD] acpi_tz0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [FILTER] atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xd0000-0xd2fff on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 132527 -> 100000 procfs registered lapic: Divisor 2, Frequency 178000671 hz Timecounter "TSC" frequency 3204012006 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) no controller detected. ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a21000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ata6-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDR drive at ata6 as master acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ad13: 476940MB at ata6-slave SATA150 ad13: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ad13: Intel check1 failed ad13: Adaptec check1 failed ad13: LSI (v3) check1 failed ad13: LSI (v2) check1 failed ad13: FreeBSD check1 failed GEOM: new disk ad13 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 2 ioapic0: Assigning ISA IRQ 9 to local APIC 3 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 2 ioapic0: Assigning PCI IRQ 21 to local APIC 3 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 Trying to mount root from ufs:/dev/ad13s1a start_init: trying /sbin/init netsmb_dev: loaded ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019a2c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE --------------040504090904000406040409 Content-Type: text/plain; name="dmesg.boot" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000. Calibrating clock(s) ... i8254 clock: 1193341 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3204012006 Hz CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3204.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 4 usable memory = 2133549056 (2034 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000cc5000 - 0x000000007c297fff, 2069704704 bytes (505299 pages) avail memory = 2058874880 (1963 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 3 APIC: CPU 2 has ACPI ID 1 APIC: CPU 3 has ACPI ID 2 ACPI: RSDP @ 0x0xf7860/0x0014 (v 0 IntelR) ACPI: RSDT @ 0x0x7fee3000/0x0034 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x7fee3080/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x7fee3100/0x4D0B (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x7fee0000/0x0040 ACPI: MCFG @ 0x0x7fee7f00/0x003C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x7fee7e40/0x0084 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: SSDT @ 0x0x7fee8860/0x0380 (v 1 PmRef CpuPm 0x00003000 INTL 0x20041203) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: edge lapic3: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x0f000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.PEX4.JMB0.CF40 -> bus 3 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 5 7 9 10 11 12 Validation 0 10 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 9 10 11 12 Validation 0 255 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 9 10 11 12 Validation 0 11 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 5 7 9 10 11 12 Validation 0 11 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 5 7 9 10 11 12 Validation 0 255 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 5 7 9 10 11 12 Validation 0 4 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 4 5 7 9 10 11 12 Validation 0 5 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 5 7 9 10 11 12 Validation 0 7 N 0 4 5 7 9 10 11 12 After Disable 0 255 N 0 4 5 7 9 10 11 12 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 924092406000924 device_attach: est3 attach returned 6 p4tcc3: on cpu3 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x29c0, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29c1, revid=0x02 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2937, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=4 map[20]: type I/O Port, range 32, base 0xfe00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2939, revid=0x02 domain=0, bus=0, slot=26, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0xfd00, size 5, enabled pcib0: matched entry for 0.26.INTD pcib0: slot 26 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x293c, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff000, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293e, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfdff8000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2948, revid=0x02 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2934, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 map[20]: type I/O Port, range 32, base 0xfc00, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xfb00, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0xfa00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293a, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfdffe000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x92 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2916, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2920, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf900, size 3, enabled map[14]: type I/O Port, range 32, base 0xf800, size 2, enabled map[18]: type I/O Port, range 32, base 0xf700, size 3, enabled map[1c]: type I/O Port, range 32, base 0xf600, size 2, enabled map[20]: type I/O Port, range 32, base 0xf500, size 4, enabled map[24]: type I/O Port, range 32, base 0xf400, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type Memory, range 64, base 0xfdffd000, size 8, enabled map[20]: type I/O Port, range 32, base 0x500, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2926, revid=0x02 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xf200, size 3, enabled map[14]: type I/O Port, range 32, base 0xf100, size 2, enabled map[18]: type I/O Port, range 32, base 0xf000, size 3, enabled map[1c]: type I/O Port, range 32, base 0xef00, size 2, enabled map[20]: type I/O Port, range 32, base 0xee00, size 4, enabled map[24]: type I/O Port, range 32, base 0xed00, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 19 pcib1: irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xf8000000-0xfbffffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0611, revid=0xa2 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled pcib1: requested memory range 0xfa000000-0xfaffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled pcib1: requested memory range 0xf8000000-0xf9ffffff: good map[24]: type I/O Port, range 32, base 0xaf00, size 7, enabled pcib1: requested I/O range 0xaf00-0xaf7f: in range pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0xaf00-0xaf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1 uhci0: port 0xff00-0xff1f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xfd00-0xfd1f irq 19 at device 26.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdfff000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: prefetched decode 0xfda00000-0xfdafffff pci2: on pcib2 pci2: domain=0, physical bus=2 pcib3: at device 28.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfd900000-0xfd9fffff pcib3: prefetched decode 0xfde00000-0xfdefffff pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x197b, dev=0x2363, revid=0x02 domain=0, bus=3, slot=0, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled pcib3: requested I/O range 0xcf00-0xcf07: in range map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled pcib3: requested I/O range 0xce00-0xce03: in range map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled pcib3: requested I/O range 0xcd00-0xcd07: in range map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled pcib3: requested I/O range 0xcc00-0xcc03: in range map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled pcib3: requested I/O range 0xcb00-0xcb0f: in range map[24]: type Memory, range 32, base 0xfd9fe000, size 13, enabled pcib3: requested memory range 0xfd9fe000-0xfd9fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 atapci0: port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfd9fe000-0xfd9fffff irq 16 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfd9fe000 atapci0: AHCI called from vendor specific driver atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: on atapci0 ata2: SATA connect status=00000000 ata2: ahci_reset devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: SATA connect status=00000000 ata3: ahci_reset devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcf00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xce00 ata4: reset tp1 mask=03 ostat0=60 ostat1=70 ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata4: reset tp2 stat0=20 stat1=30 devices=0x0 ata4: [MPSAFE] ata4: [ITHREAD] uhci3: port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfa00 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: on uhci5 usb6: USB revision 1.0 uhub6: on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffe000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: on ehci1 usb7: USB revision 2.0 uhub7: on usb7 uhub7: 6 ports with 6 removable, self powered pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0xfdc00000-0xfdcfffff pcib4: prefetched decode 0xfdb00000-0xfdbfffff pcib4: Subtractively decoded bridge. pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbe00, size 8, enabled pcib4: requested I/O range 0xbe00-0xbeff: in range map[14]: type Memory, range 32, base 0xfdcff000, size 8, enabled pcib4: requested memory range 0xfdcff000-0xfdcff0ff: good pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 23 found-> vendor=0x10ec, dev=0x8167, revid=0x10 domain=0, bus=4, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled pcib4: requested I/O range 0xbc00-0xbcff: in range map[14]: type Memory, range 32, base 0xfdcfe000, size 8, enabled pcib4: requested memory range 0xfdcfe000-0xfdcfe0ff: good pcib4: matched entry for 4.1.INTA pcib4: slot 1 INTA hardwired to IRQ 22 found-> vendor=0x104c, dev=0x8023, revid=0x00 domain=0, bus=4, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x44 (2040 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfdcfd000, size 11, enabled pcib4: requested memory range 0xfdcfd000-0xfdcfd7ff: good map[14]: type Memory, range 32, base 0xfdcf8000, size 14, enabled pcib4: requested memory range 0xfdcf8000-0xfdcfbfff: good pcib4: matched entry for 4.2.INTA pcib4: slot 2 INTA hardwired to IRQ 21 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbe00 pcib4: re0 requested I/O range 0xbe00-0xbeff: in range re0: port 0xbe00-0xbeff mem 0xfdcff000-0xfdcff0ff irq 23 at device 0.0 on pci4 pcib4: re0 requested I/O range 0xbe00-0xbeff: in range miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:50:8d:bd:81:4d re0: [MPSAFE] re0: [FILTER] re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00 pcib4: re1 requested I/O range 0xbc00-0xbcff: in range re1: port 0xbc00-0xbcff mem 0xfdcfe000-0xfdcfe0ff irq 22 at device 1.0 on pci4 pcib4: re1 requested I/O range 0xbc00-0xbcff: in range miibus1: on re1 rgephy1: PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: bpf attached re1: Ethernet address: 00:50:8d:bd:81:4e ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54 re1: [MPSAFE] re1: [FILTER] fwohci0: mem 0xfdcfd000-0xfdcfd7ff,0xfdcf8000-0xfdcfbfff irq 21 at device 2.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdcfd000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:50:8d:00:00:b8:3a:a2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x27cc000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:50:8d:b8:3a:a2 fwe0: bpf attached fwe0: Ethernet address: 02:50:8d:b8:3a:a2 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:50:8d:00:00:b8:3a:a2 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f,0xf400-0xf40f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf500 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf400 ata5: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf900 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf800 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf700 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf600 ata6: reset tp1 mask=03 ostat0=00 ostat1=50 ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata6: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: reset tp2 stat0=00 stat1=50 devices=0x6 ata6: [MPSAFE] ata6: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci2: port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f,0xed00-0xed0f irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xee00 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xed00 ata7: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf200 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf100 ata7: reset tp1 mask=03 ostat0=7f ostat1=7f ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff ata7: reset tp2 stat0=ff stat1=ff devices=0x0 ata7: [MPSAFE] ata7: [ITHREAD] ata8: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf000 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xef00 ata8: reset tp1 mask=03 ostat0=7f ostat1=7f ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff ata8: reset tp2 stat0=ff stat1=ff devices=0x0 ata8: [MPSAFE] ata8: [ITHREAD] acpi_tz0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [FILTER] atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xd0000-0xd2fff on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 132527 -> 100000 procfs registered lapic: Divisor 2, Frequency 178000671 hz Timecounter "TSC" frequency 3204012006 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) no controller detected. ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a21000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ata6-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDR drive at ata6 as master acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ad13: 476940MB at ata6-slave SATA150 ad13: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ad13: Intel check1 failed ad13: Adaptec check1 failed ad13: LSI (v3) check1 failed ad13: LSI (v2) check1 failed ad13: FreeBSD check1 failed GEOM: new disk ad13 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 2 ioapic0: Assigning ISA IRQ 9 to local APIC 3 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 2 ioapic0: Assigning PCI IRQ 21 to local APIC 3 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 Trying to mount root from ufs:/dev/ad13s1a start_init: trying /sbin/init netsmb_dev: loaded ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019a2c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1cc00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c0c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039b0400 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c6400 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c6400 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039cac00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1cc00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c0c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c7c00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1d800 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1dc00 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c9000 [20070320] ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320] ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE --------------040504090904000406040409-- From owner-freebsd-acpi@FreeBSD.ORG Thu Aug 7 15:14:11 2008 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AC5A91065678 for ; Thu, 7 Aug 2008 15:14:11 +0000 (UTC) (envelope-from pagxir@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.170]) by mx1.freebsd.org (Postfix) with ESMTP id 3134C8FC16 for ; Thu, 7 Aug 2008 15:14:10 +0000 (UTC) (envelope-from pagxir@gmail.com) Received: by ug-out-1314.google.com with SMTP id q2so381235uge.37 for ; Thu, 07 Aug 2008 08:14:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:message-id:date:from:to :subject:in-reply-to:mime-version:content-type :content-transfer-encoding:content-disposition:references; bh=0fnsf6Vys5ort0DvXdjXUZjFCx8Z/BYIaI6iB7pRCxM=; b=nhp51yodhpRT7mjubH5C5sDQwiDPxhAewvpPRJN1K0E4W/pAsavlpKHxfiNGTzLrOz kVoWCk+OzO1WPM7jWGJkExRRbUqf4vGCdFBeI/LcP3PDgiG6k0YKlV+F03UC3XdHEnA7 2Kvxnp/LFF7Zo4L7XXg+EnNCLGxH7RjjPHPuM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:in-reply-to:mime-version :content-type:content-transfer-encoding:content-disposition :references; b=GZFgfV0BTs10ZqxXNXZKBUYd/dRladyHm6jZxBe7rfkEMknOS9iZ/7R5BSpWZoGDib EndOTtRVJvms9we6e9xdHXKVXHM6R2TBQYc4mDmppu5CnFxhKVlhcFoij9p57bZSl/bz RcH3WfgEy61Izu8HSnJQ2JLhCFGkcpcbnxTOM= Received: by 10.103.206.12 with SMTP id i12mr2342753muq.33.1218120524924; Thu, 07 Aug 2008 07:48:44 -0700 (PDT) Received: by 10.103.244.2 with HTTP; Thu, 7 Aug 2008 07:48:44 -0700 (PDT) Message-ID: <98869b7c0808070748xc6a1a37j6d9b536bc097e9bb@mail.gmail.com> Date: Thu, 7 Aug 2008 14:48:44 +0000 From: "=?UTF-8?B?6KO05Zu95YW0?=" To: freebsd-acpi@freebsd.org, freebsd-current@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: base64 Content-Disposition: inline References: <98869b7c0808051028q447d983ds68d44b752b82e418@mail.gmail.com> Cc: Subject: Re: ACPI problem: Machine Cannot poweroff. X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 Aug 2008 15:14:11 -0000 MjAwOC84LzUgQ2FybG9zIEEuIE0uIGRvcyBTYW50b3MgPHVuaXhtYW5pYUBnbWFpbC5jb20+Ogo+ IE9uIFR1ZSwgQXVnIDUsIDIwMDggYXQgMjoyOCBQTSwg6KO05Zu95YW0IDxwYWd4aXJAZ21haWwu Y29tPiB3cm90ZToKPj4gTXkgbWFjaGluZSBpcyBIUCBDb21wYXEgUHJlc2FyaW8gVjM4MDXjgIIg T1MgaXMgRnJlZUJTRCA3LjAtUmVsZWFzZS4KPj4gKHVuYW1lOiBGcmVlQlNEIGJsdWVyb2FkLnV4 IDcuMC1SRUxFQVNFIEZyZWVCU0QgNy4wLVJFTEVBU0UgIzA6IE1vbgo+PiBKdW4gIDIgMjI6MzM6 NDMgVVRDIDIwMDggICAgIHJvb3RAOi91c3Ivb2JqL3Vzci9zcmMvc3lzL0JMVUVST0FEIGkzODYp Cj4+IFdoZW4gcG93ZXIgd2lyZSByZW1vdmUgYW5kIGNvbm5lY3QgYWdhaW4sICB0aGUgbWFjaGlu ZSBjYW5ub3QgcG93ZXJvZmYKPj4gbm9ybWFsbHkuIEkgbXVzdCBwcmVzcyB0aGUgcG93ZXIgYnV0 dG9uIHRvIGZvcmNlIHBvd2VyIG9mZi4KPj4gQWxzbywga2V5cHJlc3Mgb24gdGhlIGNvbnNvbGUg YmVjb21lIHNsb3cgZG93bi4gRG9lcyBhbnlvbmUgaGF2ZSB0aGUKPj4gc2FtZSBwcm9ibGVtPyBI b3cgdG8gc29sdXRpb24gdGhpcyBjb25kaXRpb24uCj4KPiBJcyBpdCBhIFYzODA1QVUgb3IgVFU/ Cj4KPiBGaXJzdCBvZiBhbGwsIGVuc3VyZSB0aGF0IHlvdSBoYXZlIHRoZSBsYXRlc3QgQklPUyB2 ZXJzaW9uLiBEZXBlbmRpbmcKPiBvbiB5b3VyIG1vZGVsIHlvdSB3aWxsIGZpbmQgaXQgZWl0aGVy IGhlcmUKPgo+IGh0dHA6Ly9oMTAwMjUud3d3MS5ocC5jb20vZXdmcmYvd2Mvc29mdHdhcmVMaXN0 P29zPTIwOTMmbGM9ZW4mY2M9dXMmZGxjPWVuJnByb2R1Y3Q9MzY3ODgzMiZsYW5nPWVuCj4KPiBv ciBoZXJlCj4KPiBodHRwOi8vaDEwMDI1Lnd3dzEuaHAuY29tL2V3ZnJmL3djL3NvZnR3YXJlTGlz dD9vcz0yMDkzJmxjPWVuJmNjPXVzJmxhbmc9ZW4mZGxjPWVuJnByb2R1Y3Q9MzY3NDkwNQo+Cj4g VGhvc2UgYXJlIFdpbkZsYXNoIGltYWdlcywgc28geW91IHdpbGwgbmVlZCBXaW5kb3dzIHRvIHVw Z3JhZGUgdGhlIEJJT1MuIDotKAo+Cj4gLS0KPiBJZiB5b3UgdGhpbmsgdGhpbmdzIGNhbid0IGdl dCB3b3JzZSBpdCdzIHByb2JhYmx5IG9ubHkKPiBiZWNhdXNlIHlvdSBsYWNrIHN1ZmZpY2llbnQg aW1hZ2luYXRpb24uCj4KSSBoYXZlIHVwZ3JhZGUgdGhlIEJJT1MsIGJ1dCB0YWtlIG5vIGVmZmVj dC4KI3VuYW1lIC1hCkZyZWVCU0QgYmx1ZXJvYWQudXggNy4wLVNUQUJMRS0yMDA4MDcgRnJlZUJT RCA3LjAtU1RBQkxFLTIwMDgwNyAjMDoKTW9uIEp1bCAxNCAyMjo0NToxNSBVVEMgMjAwOApyb290 QGxvZ2FuLmNzZS5idWZmYWxvLmVkdTovdXNyL29iai91c3Ivc3JjL3N5cy9HRU5FUklDICBpMzg2 CgppZiBlbmFibGUgQUNQSSBhbmQgdXNlIGJvb3QgLXYsIEkgY2FuIGFsc28gc2VlOiAxNi5hZmJk YWEzYmEyNDVmNjgwCnRvbyBsb25nIHdoZW4gcmVtb3ZlIHRoZSBwb3dlciB3aXJlLgp0aGUgYm9v dCBtZXNzYWdlIGlzIGZvbGxvdzoKaHR0cDovL2dyb3Vwcy5nb29nbGUuY29tL2dyb3VwL2J0bG9h ZC93ZWIvZW5hYmxlLWFjcGkuZG1lc2cudHh0Cmh0dHA6Ly9ncm91cHMuZ29vZ2xlLmNvbS9ncm91 cC9idGxvYWQvd2ViL2Rpc2FibGUtYWNwaS5kbWVzZy50eHQKc3kKCiNzeXNjdGwgaHcuYWNwaQpo dy5hY3BpLnN1cHBvcnRlZF9zbGVlcF9zdGF0ZTogUzMgUzQgUzUKaHcuYWNwaS5wb3dlcl9idXR0 b25fc3RhdGU6IFM1Cmh3LmFjcGkuc2xlZXBfYnV0dG9uX3N0YXRlOiBTMwpody5hY3BpLmxpZF9z d2l0Y2hfc3RhdGU6IE5PTkUKaHcuYWNwaS5zdGFuZGJ5X3N0YXRlOiBTMQpody5hY3BpLnN1c3Bl bmRfc3RhdGU6IFMzCmh3LmFjcGkuc2xlZXBfZGVsYXk6IDEKaHcuYWNwaS5zNGJpb3M6IDAKaHcu YWNwaS52ZXJib3NlOiAwCmh3LmFjcGkuZGlzYWJsZV9vbl9yZWJvb3Q6IDAKaHcuYWNwaS5oYW5k bGVfcmVib290OiAwCmh3LmFjcGkucmVzZXRfdmlkZW86IDAKaHcuYWNwaS5jcHUuY3hfbG93ZXN0 OiBDMQpody5hY3BpLnRoZXJtYWwubWluX3J1bnRpbWU6IDAKaHcuYWNwaS50aGVybWFsLnBvbGxp bmdfcmF0ZTogMTAKaHcuYWNwaS50aGVybWFsLnVzZXJfb3ZlcnJpZGU6IDAKaHcuYWNwaS50aGVy bWFsLnR6MC50ZW1wZXJhdHVyZTogNTQuMEMKaHcuYWNwaS50aGVybWFsLnR6MC5hY3RpdmU6IC0x Cmh3LmFjcGkudGhlcm1hbC50ejAucGFzc2l2ZV9jb29saW5nOiAxCmh3LmFjcGkudGhlcm1hbC50 ejAudGhlcm1hbF9mbGFnczogMApody5hY3BpLnRoZXJtYWwudHowLl9QU1Y6IDkyLjBDCmh3LmFj cGkudGhlcm1hbC50ejAuX0hPVDogMTAwLjBDCmh3LmFjcGkudGhlcm1hbC50ejAuX0NSVDogMTIw LjBDCmh3LmFjcGkudGhlcm1hbC50ejAuX0FDeDogLTEgLTEgLTEgLTEgLTEgLTEgLTEgLTEgLTEg LTEKaHcuYWNwaS50aGVybWFsLnR6MC5fVEMxOiA0Cmh3LmFjcGkudGhlcm1hbC50ejAuX1RDMjog Mwpody5hY3BpLnRoZXJtYWwudHowLl9UU1A6IDE1MApody5hY3BpLnRoZXJtYWwudHoxLnRlbXBl cmF0dXJlOiA1Ny4wQwpody5hY3BpLnRoZXJtYWwudHoxLmFjdGl2ZTogLTEKaHcuYWNwaS50aGVy bWFsLnR6MS5wYXNzaXZlX2Nvb2xpbmc6IDAKaHcuYWNwaS50aGVybWFsLnR6MS50aGVybWFsX2Zs YWdzOiAwCmh3LmFjcGkudGhlcm1hbC50ejEuX1BTVjogLTEKaHcuYWNwaS50aGVybWFsLnR6MS5f SE9UOiAxMjYuMEMKaHcuYWNwaS50aGVybWFsLnR6MS5fQ1JUOiAxMjAuMEMKaHcuYWNwaS50aGVy bWFsLnR6MS5fQUN4OiAtMSAtMSAtMSAtMSAtMSAtMSAtMSAtMSAtMSAtMQpody5hY3BpLnRoZXJt YWwudHoxLl9UQzE6IC0xCmh3LmFjcGkudGhlcm1hbC50ejEuX1RDMjogLTEKaHcuYWNwaS50aGVy bWFsLnR6MS5fVFNQOiAtMQpody5hY3BpLmJhdHRlcnkubGlmZTogMTAwCmh3LmFjcGkuYmF0dGVy eS50aW1lOiAtMQpody5hY3BpLmJhdHRlcnkuc3RhdGU6IDAKaHcuYWNwaS5iYXR0ZXJ5LnVuaXRz OiAxCmh3LmFjcGkuYmF0dGVyeS5pbmZvX2V4cGlyZTogNQpody5hY3BpLmFjbGluZTogMQoKdGhp cyBBU0wgZmlsZSBpcyBmb2xsb3c6Cmh0dHA6Ly9ncm91cHMuZ29vZ2xlLmNvbS9ncm91cC9idGxv YWQvd2ViL3BhZ3hpci1IUENvbXBhcVYzNzAwQVUuYXNsCg== From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 8 18:43:01 2008 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 73C44106564A for ; Fri, 8 Aug 2008 18:43:01 +0000 (UTC) (envelope-from pingmai@yahoo.com) Received: from web52908.mail.re2.yahoo.com (web52908.mail.re2.yahoo.com [206.190.49.18]) by mx1.freebsd.org (Postfix) with SMTP id 0F3938FC12 for ; Fri, 8 Aug 2008 18:43:00 +0000 (UTC) (envelope-from pingmai@yahoo.com) Received: (qmail 99136 invoked by uid 60001); 8 Aug 2008 18:16:20 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type:Message-ID; b=t/v5Gp7Z+8QshEsnD/uCcmafXdpJlXaGfZcw/TEq73Hh5/zxcvGEKUt4oTIl54Oepu0CtulPWbiH+yKxHAP3GG5V729ngmhGFS2oXb/GZrQYbKilsFVV5n+tsSS7lYYg057yC+FT0DnI1ltLte5yTkC96Sumk71fj3rO+Jaa5P4=; Received: from [68.183.200.11] by web52908.mail.re2.yahoo.com via HTTP; Fri, 08 Aug 2008 11:16:20 PDT X-Mailer: YahooMailWebService/0.7.218 Date: Fri, 8 Aug 2008 11:16:20 -0700 (PDT) From: ping To: freebsd-drivers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hackers@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <374442.98765.qm@web52908.mail.re2.yahoo.com> Cc: Subject: missing interrupts? X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 08 Aug 2008 18:43:01 -0000 this is an interrupt handler that's attached to irq 31 on ioapic1 on a 6.1R kernel, type INTR_TYPE_NET|INTR_MPSAFE. seems that it's missing interrupts. watching the KTR trace, it was running along fine, then it just stopped. intr handler stopped getting run. but the interrupt register on chip was high. is this a case of lost interrupts? or hardware problem? TIA, ping From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 8 20:53:21 2008 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 31FB01065674; Fri, 8 Aug 2008 20:53:21 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (bigknife-pt.tunnel.tserv9.chi1.ipv6.he.net [IPv6:2001:470:1f10:75::2]) by mx1.freebsd.org (Postfix) with ESMTP id C7AF98FC0C; Fri, 8 Aug 2008 20:53:20 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from localhost.corp.yahoo.com (john@localhost [IPv6:::1]) (authenticated bits=0) by server.baldwin.cx (8.14.2/8.14.2) with ESMTP id m78KrEBS031996; Fri, 8 Aug 2008 16:53:14 -0400 (EDT) (envelope-from jhb@freebsd.org) From: John Baldwin To: freebsd-acpi@freebsd.org Date: Fri, 8 Aug 2008 16:10:03 -0400 User-Agent: KMail/1.9.7 References: <374442.98765.qm@web52908.mail.re2.yahoo.com> In-Reply-To: <374442.98765.qm@web52908.mail.re2.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200808081610.03720.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [IPv6:::1]); Fri, 08 Aug 2008 16:53:14 -0400 (EDT) X-Virus-Scanned: ClamAV 0.93.1/7984/Fri Aug 8 14:51:24 2008 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-2.5 required=4.2 tests=AWL,BAYES_00,NO_RELAYS autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: freebsd-hackers@freebsd.org, freebsd-drivers@freebsd.org Subject: Re: missing interrupts? X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 08 Aug 2008 20:53:21 -0000 On Friday 08 August 2008 02:16:20 pm ping wrote: > this is an interrupt handler that's attached to irq 31 on ioapic1 on a 6.1R kernel, type INTR_TYPE_NET|INTR_MPSAFE. seems that it's missing interrupts. watching the KTR trace, it was running along fine, then it just stopped. intr handler stopped getting run. but the interrupt register on chip was high. is this a case of lost interrupts? or hardware problem? There is one possible race in the I/O APIC code someone pointed me at recently. You can try expanding the scope of the icu_lock to cover all of ioapic_program_intpin() to see if it fixes your issue (sys///io_apic.c) -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Fri Aug 8 23:27:57 2008 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5632B106567C for ; Fri, 8 Aug 2008 23:27:57 +0000 (UTC) (envelope-from pingmai@yahoo.com) Received: from web52907.mail.re2.yahoo.com (web52907.mail.re2.yahoo.com [206.190.49.17]) by mx1.freebsd.org (Postfix) with SMTP id DC43D8FC18 for ; Fri, 8 Aug 2008 23:27:56 +0000 (UTC) (envelope-from pingmai@yahoo.com) Received: (qmail 17646 invoked by uid 60001); 8 Aug 2008 23:27:55 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Received:X-Mailer:Date:From:Reply-To:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type:Message-ID; b=6HfrwK9DzTDHPv43tpxqEOiGCkrq6T+9AnVPMfioGgd6xNku9EjssaKBhuAj0HXKJVOLAUJvmUZfs9OxSspc7x89LejQ8YaGZIn1lqlIbu8ARIAuyDG02YBPLJ96+T/fvdABuqzFzgXWVVF2sxg/MM4hH7MemqsUXvzp/4OOEjk=; Received: from [68.183.200.11] by web52907.mail.re2.yahoo.com via HTTP; Fri, 08 Aug 2008 16:27:55 PDT X-Mailer: YahooMailWebService/0.7.218 Date: Fri, 8 Aug 2008 16:27:55 -0700 (PDT) From: Ping Mai To: freebsd-acpi@freebsd.org, John Baldwin In-Reply-To: <200808081610.03720.jhb@freebsd.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <755343.17576.qm@web52907.mail.re2.yahoo.com> Cc: freebsd-hackers@freebsd.org, freebsd-drivers@freebsd.org Subject: Re: missing interrupts? X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: pingmai@yahoo.com List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 08 Aug 2008 23:27:57 -0000 Thanks John. tried it but didn't help. --- On Fri, 8/8/08, John Baldwin wrote: > From: John Baldwin > Subject: Re: missing interrupts? > To: freebsd-acpi@freebsd.org > Cc: "ping" , freebsd-drivers@freebsd.org, freebsd-hackers@freebsd.org > Date: Friday, August 8, 2008, 1:10 PM > On Friday 08 August 2008 02:16:20 pm ping wrote: > > this is an interrupt handler that's attached to > irq 31 on ioapic1 on a 6.1R > kernel, type INTR_TYPE_NET|INTR_MPSAFE. seems that > it's missing interrupts. > watching the KTR trace, it was running along fine, then it > just stopped. > intr handler stopped getting run. but the interrupt > register on chip was > high. is this a case of lost interrupts? or hardware > problem? > > There is one possible race in the I/O APIC code someone > pointed me at > recently. You can try expanding the scope of the icu_lock > to cover all of > ioapic_program_intpin() to see if it fixes your issue > (sys///io_apic.c) > > -- > John Baldwin