From owner-freebsd-drivers@FreeBSD.ORG Sun Apr 13 02:44:03 2008 Return-Path: Delivered-To: freebsd-drivers@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2DA231065671 for ; Sun, 13 Apr 2008 02:44:03 +0000 (UTC) (envelope-from gpmusketeer@hotmail.com) Received: from bay0-omc3-s8.bay0.hotmail.com (bay0-omc3-s8.bay0.hotmail.com [65.54.246.208]) by mx1.freebsd.org (Postfix) with ESMTP id 0C4B78FC1D for ; Sun, 13 Apr 2008 02:44:03 +0000 (UTC) (envelope-from gpmusketeer@hotmail.com) Received: from BAY109-W24 ([64.4.19.124]) by bay0-omc3-s8.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Sat, 12 Apr 2008 19:32:03 -0700 Message-ID: X-Originating-IP: [60.48.75.173] From: paul pang To: Date: Sun, 13 Apr 2008 10:32:03 +0800 Importance: Normal MIME-Version: 1.0 X-OriginalArrivalTime: 13 Apr 2008 02:32:03.0469 (UTC) FILETIME=[8F05E3D0:01C89D0E] Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: wpi make error* X-BeenThere: freebsd-drivers@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Writing device drivers for FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 13 Apr 2008 02:44:03 -0000 I have 20071102-freebsd-wpi.tar.gz install successfully but this is the i= fconfig message wpi0: flags=3D8803 metric 0 mtu 1500 ether 00:13:02:bf:92:f8 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bintval 0 Note that: no carrier. and dmesg stated wpi0: mem 0xd8000000-0xd8000fff irq 17 at d= evice 0.0 on pci3 bus_dmamem_alloc failed to align memory properly. ................ bus_dmamem_alloc failed to align memory properly. wpi0: Ethernet address: 00:13:02:bf:92:f8 wpi0: [ITHREAD] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps wpifw: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/= . wpifw: If you agree with the license, set legal.intel_wpi.license_ack=3D1 i= n /boot/loader.conf. module_register_init: MOD_LOAD (wpifw_fw, 0xc4f6d520, 0) error 1 firmware_get: failed to load firmware image wpifw wpi0: could not load firmware image 'wpifw' wpi0: A problem occurred loading the firmware to the driver ukbd0: at uhub2 port 1 (addr 2) disconnected ukbd0: detached uhid0: at uhub2 port 1 (addr 2) disconnected uhid0: detached ukbd0: on uhub2 kbd2 at ukbd0 uhid0: on uhub2 wpi0: detached wpi0: mem 0xd8000000-0xd8000fff irq 17 at d= evice 0.0 on pci3 wpi0: Driver Revision 20071102 wpi0: Hardware Revision (0x801) bus_dmamem_alloc failed to align memory properly. ................................. bus_dmamem_alloc failed to align memory properly. adding chan 1 flags=3D0x2b maxpwr=3D15, offset 2 adding chan 2 flags=3D0x2b maxpwr=3D15, offset 4 adding chan 3 flags=3D0x2b maxpwr=3D15, offset 6 adding chan 4 flags=3D0x2b maxpwr=3D15, offset 8 adding chan 5 flags=3D0x2b maxpwr=3D15, offset 10 adding chan 6 flags=3D0x2b maxpwr=3D15, offset 12 adding chan 7 flags=3D0x2b maxpwr=3D15, offset 14 adding chan 8 flags=3D0x2b maxpwr=3D15, offset 16 adding chan 9 flags=3D0x2b maxpwr=3D15, offset 18 adding chan 10 flags=3D0x2b maxpwr=3D15, offset 20 adding chan 11 flags=3D0x2b maxpwr=3D14, offset 22 adding chan 36 flags=3D0xa1 maxpwr=3D14, offset 23 adding chan 40 flags=3D0xa1 maxpwr=3D14, offset 24 adding chan 44 flags=3D0xa1 maxpwr=3D14, offset 25 adding chan 48 flags=3D0xa1 maxpwr=3D14, offset 26 adding chan 52 flags=3D0xb1 maxpwr=3D14, offset 27 adding chan 56 flags=3D0xb1 maxpwr=3D14, offset 28 adding chan 60 flags=3D0xb1 maxpwr=3D14, offset 29 adding chan 64 flags=3D0xb1 maxpwr=3D14, offset 30 adding chan 149 flags=3D0x21 maxpwr=3D16, offset 31 adding chan 153 flags=3D0x21 maxpwr=3D16, offset 32 adding chan 157 flags=3D0x21 maxpwr=3D16, offset 33 adding chan 161 flags=3D0x21 maxpwr=3D16, offset 34 adding chan 165 flags=3D0x21 maxpwr=3D16, offset 35 power group 0: chan=3D1 maxpwr=3D47 temp=3D-187 sample 0: index=3D13 power=3D43 sample 1: index=3D29 power=3D30 sample 2: index=3D47 power=3D10 sample 3: index=3D58 power=3D-1 sample 4: index=3D77 power=3D-19 power group 1: chan=3D44 maxpwr=3D51 temp=3D-191 sample 0: index=3D12 power=3D42 sample 1: index=3D19 power=3D35 sample 2: index=3D32 power=3D21 sample 3: index=3D43 power=3D11 sample 4: index=3D77 power=3D-22 power group 2: chan=3D64 maxpwr=3D51 temp=3D-189 sample 0: index=3D12 power=3D43 sample 1: index=3D20 power=3D35 sample 2: index=3D33 power=3D22 sample 3: index=3D44 power=3D13 sample 4: index=3D77 power=3D-18 power group 3: chan=3D116 maxpwr=3D48 temp=3D-188 sample 0: index=3D12 power=3D36 sample 1: index=3D20 power=3D27 sample 2: index=3D36 power=3D11 sample 3: index=3D48 power=3D0 sample 4: index=3D77 power=3D-27 power group 4: chan=3D153 maxpwr=3D48 temp=3D-186 sample 0: index=3D10 power=3D35 sample 1: index=3D20 power=3D23 sample 2: index=3D32 power=3D11 sample 3: index=3D42 power=3D3 sample 4: index=3D77 power=3D-28 wpi0: Regulatory Domain: MoW1 wpi0: Hardware Type: B wpi0: Hardware Revision: ? wpi0: SKU does support 802.11a wpi0: Ethernet address: 00:13:02:bf:92:f8 wpi0: [ITHREAD] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp= s 36Mbps 48Mbps 54Mbps wpi0: timeout resetting Tx ring 1 wpi0: timeout resetting Tx ring 3 wpi0: timeout resetting Tx ring 4 NEWSTATE:INIT firmware_get: failed to load firmware image wpifw wpi0: could not load firmware image 'wpifw' wpi0: A problem occurred loading the firmware to the driver NEWSTATE:INIT firmware_get: failed to load firmware image wpifw wpi0: could not load firmware image 'wpifw' wpi0: A problem occurred loading the firmware to the driver While i have this in my loader.conf=20 if_ath_load["YES" if_wpi_load=3D"YES" wlan_load=3D"YES" wlan_wep_load=3D"YES" wlan_ccmp_load=3D"YES" wlan_tkip_load=3D"YES" legal.intel_wpi.license_ack=3D1 wpifw_load=3D"YES" but why it still ask me to set the license? _________________________________________________________________ Help Splitzo Sally Before It=92s Too Late!=20 http://www.thegirlwhosplitinto5.com/=