From owner-freebsd-hardware@FreeBSD.ORG Mon Mar 24 20:34:30 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 451B91065671 for ; Mon, 24 Mar 2008 20:34:30 +0000 (UTC) (envelope-from freebsd-hardware@m.gmane.org) Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by mx1.freebsd.org (Postfix) with ESMTP id E50F98FC23 for ; Mon, 24 Mar 2008 20:34:29 +0000 (UTC) (envelope-from freebsd-hardware@m.gmane.org) Received: from list by ciao.gmane.org with local (Exim 4.43) id 1JdtNC-0006Ks-Ja for freebsd-hardware@freebsd.org; Mon, 24 Mar 2008 20:34:26 +0000 Received: from 78-0-71-165.adsl.net.t-com.hr ([78.0.71.165]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 24 Mar 2008 20:34:26 +0000 Received: from ivoras by 78-0-71-165.adsl.net.t-com.hr with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Mon, 24 Mar 2008 20:34:26 +0000 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-hardware@freebsd.org From: Ivan Voras Date: Mon, 24 Mar 2008 21:34:11 +0100 Lines: 39 Message-ID: References: <53cc795f0803190406l3490cd14gce524977c18db0c8@mail.gmail.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig319C46388561F76964B378C0" X-Complaints-To: usenet@ger.gmane.org X-Gmane-NNTP-Posting-Host: 78-0-71-165.adsl.net.t-com.hr User-Agent: Thunderbird 2.0.0.12 (Windows/20080213) In-Reply-To: <53cc795f0803190406l3490cd14gce524977c18db0c8@mail.gmail.com> X-Enigmail-Version: 0.95.6 Sender: news Subject: Re: IBM x3550 and ServeRAID 8k-l X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Mar 2008 20:34:30 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig319C46388561F76964B378C0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: quoted-printable Matkhamtkha Brekher wrote: > Greetings to all! >=20 > I'm planning to buy IBM Server x3550 7978KGG which already has > integrated RAID controller ServeRAID 8k-l >=20 > Here http://www.freebsd.org/releases/7.0R/hardware.html#DISK i've > found only support of IBM ServeRAID 8k controllers. > Does it compatible with 8k-l ? > And what the major differencies between 8k-l and 8k ? I have no idea about the difference, but it's probably small. The 8k=20 model works very well with FreeBSD so this one should also. If you don't = get any more specific replies on this topic, try to test the hardware=20 (possibly via a LiveCD or something) before buying. --------------enig319C46388561F76964B378C0 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH6BBDldnAQVacBcgRAoYRAKCcTeId0DqpthWe5FpKNZC7OiMflACfbBfv xI1DuLRvKGrHLZkDNnC7ppY= =w4ZJ -----END PGP SIGNATURE----- --------------enig319C46388561F76964B378C0-- From owner-freebsd-hardware@FreeBSD.ORG Tue Mar 25 04:27:07 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 3C3161065670; Tue, 25 Mar 2008 04:27:07 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by mx1.freebsd.org (Postfix) with ESMTP id DA25E8FC18; Tue, 25 Mar 2008 04:27:03 +0000 (UTC) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (localhost [127.0.0.1]) by bunrab.catwhisker.org (8.13.3/8.13.3) with ESMTP id m2P4R3GP088758; Mon, 24 Mar 2008 21:27:03 -0700 (PDT) (envelope-from david@bunrab.catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.13.3/8.13.1/Submit) id m2P4R3w7088757; Mon, 24 Mar 2008 21:27:03 -0700 (PDT) (envelope-from david) Date: Mon, 24 Mar 2008 21:27:03 -0700 From: David Wolfskill To: John Baldwin Message-ID: <20080325042703.GT75023@bunrab.catwhisker.org> References: <20080318171434.GA49159@bunrab.catwhisker.org> <200803190917.17502.jhb@freebsd.org> <20080319204148.GZ53010@bunrab.catwhisker.org> <200803211102.35682.jhb@freebsd.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="RMorpr61ug7CvG36" Content-Disposition: inline In-Reply-To: <200803211102.35682.jhb@freebsd.org> User-Agent: Mutt/1.4.2.1i Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Mar 2008 04:27:07 -0000 --RMorpr61ug7CvG36 Content-Type: multipart/mixed; boundary="Avw2VvEbzfULB0h1" Content-Disposition: inline --Avw2VvEbzfULB0h1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Mar 21, 2008 at 11:02:35AM -0400, John Baldwin wrote: > ... > Ok. Please apply the patch below and report back which printfs you see. >... Here you go: =2E.. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF WARNING: WITNESS option enabled, expect reduced performance. =2E.. usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. > hang here on alternate boots < pcib2: fetching _PRT pcib2: adding pci bus child device pcib2: force attaching PCI link devices found in _PRT pcib2: attaching the PCI child bus device pci2: on pcib2 pci2: domain=3D0, physical bus=3D2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xfe00-0xfe07,0xfe10-= 0xfe13, 0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 = at de vice 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfec0 atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff970000 atapci1: [MPSAFE] atapci1: [ITHREAD] =2E... In case that wasn't sufficient detail, I've attached the "hang" and "nohang" typescripts from the serial console. Thanks! Peace, david --=20 David H. Wolfskill david@catwhisker.org I submit that "conspiracy" would be an appropriate collective noun for cats. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --Avw2VvEbzfULB0h1 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="optiplex_755.hang" Content-Transfer-Encoding: quoted-printable Script started on Mon Mar 24 15:06:10 2008 localhost(6.3-S)[1] tip com1 can't open log file /var/log/aculog. =07connected /boot.config: -DP FreeBSD/i386 boot Default: 0:ad(0,a)/boot/loader boot: /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Consoles: intern= al video/keyboard serial port =20 BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/2052094kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@dwolf-lnx.jnpr.net, Tue Feb 12 23:46:19 UTC 2008) |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08Loading /boot/defaults/loader.conf=20 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08/boot/kernel/kernel text=3D0x7e7224 |=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08data=3D0xd3fc0+0xab73c -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08syms=3D[0x4+0x8d6f0|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0xbce97\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08] \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08=1B[H=1B[J=1B[4;46H ______=1B[5;46H | ____| __ ___ ___ =1B[= 6;46H | |__ | '__/ _ \/ _ \=1B[7;46H | __|| | | __/ __/=1B[8;46H = | | | | | | |=1B[9;46H |_| |_| \___|\___|=1B[10;46H ___= _ _____ _____=1B[11;46H | _ \ / ____| __ \=1B[12;46H | |_) | (___= | | | |=1B[13;46H | _ < \___ \| | | |=1B[14;46H | |_) |____) | |_= _| |=1B[15;46H | | | |=1B[16;46H |____/|_____/|_____/= =1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H= =B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3= =1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B= [3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;= 44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[= 15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3= =1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22= ;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0= =1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome to FreeBSD!=1B[9;5H1 =1B[9;6H. Bo= ot FreeBSD [default]=1B[10;5H2 =1B[10;6H. Boot FreeBSD with ACPI disabled= =1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe Mode=1B[12;5H4 =1B[12;6H. Boot F= reeBSD in single user mode=1B[13;5H5 =1B[13;6H. Boot FreeBSD with verbose l= ogging=1B[14;5H6 =1B[14;6H. Escape to loader prompt=1B[15;5H7 =1B[15;6H. Re= boot=1B[20;5HSelect option, [Enter] for default=1B[21;5Hor [Space] to pause= timer =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 = =1B[21;32H10 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 = =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B= [21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H8 =1B[21= ;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32= H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[25;0H|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /boot/kernel/acpi.ko text=3D0x53e6c /=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08data=3D0x25e0+0x186c -=08\= =08syms=3D[0x4+0x89f0|=08/=08+0x4+0xbb87-=08\=08|=08] /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009e400 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D000000007d3ff800 SMAP type=3D04 base=3D000000007d4ff800 len=3D0000000000054400 SMAP type=3D03 base=3D000000007d553c00 len=3D0000000000002000 SMAP type=3D02 base=3D000000007d555c00 len=3D0000000000aaa400 SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000 SMAP type=3D02 base=3D00000000f0000000 len=3D000000000ec00000 SMAP type=3D02 base=3D00000000fed00000 len=3D0000000000000400 SMAP type=3D02 base=3D00000000fed20000 len=3D0000000000080000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000ffb00000 len=3D0000000000500000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f20000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f201d8. Calibrating clock(s) ... i8254 clock: 1193185 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995000690 Hz CPU: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (1995.00-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x6fd Stepping =3D 13 Features=3D0xbfebfbff Features2=3D0xe39d AMD Features=3D0x20000000 AMD Features2=3D0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory =3D 2102390784 (2004 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007b365fff, 2050232320 bytes (500545 pages) avail memory =3D 2049662976 (1954 MB) Table 'FACP' at 0xfc72b Table 'SSDT' at 0xfff70f4c Table 'APIC' at 0xfc81f MADT: Found table at 0xfc81f MP Configuration Table version 1.4 found at 0xc00f0000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 5 ACPI ID 3: disabled MADT: Found CPU APIC ID 7 ACPI ID 4: disabled MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 1 ACPI ID 6: disabled MADT: Found CPU APIC ID 2 ACPI ID 7: disabled MADT: Found CPU APIC ID 3 ACPI ID 8: disabled ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe90 bios32: Entry =3D 0xffea0 (c00ffea0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xb09f pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xfec00/0x0024 (v 2 DELL ) ACPI: XSDT @ 0x0xfc5fb/0x008C (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: FACP @ 0x0xfc72b/0x00F4 (v 3 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: DSDT @ 0x0xfff6c8a7/0x4586 (v 1 DELL dt_ex 0x00001000 INTL 0x20= 050624) ACPI: FACS @ 0x0x7d4ff800/0x0040 ACPI: SSDT @ 0x0xfff70f4c/0x00AA (v 1 DELL st_ex 0x00001000 INTL 0x20= 050624) ACPI: APIC @ 0x0xfc81f/0x0092 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: BOOT @ 0x0xfc8b1/0x0028 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ASF! @ 0x0xfc8d9/0x0096 (v 32 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: MCFG @ 0x0xfc96f/0x003E (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: HPET @ 0x0xfc9ad/0x0038 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: TCPA @ 0x0xfcc09/0x0032 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ____ @ 0x0xfcc3b/0x0030 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SLIC @ 0x0xfc9e5/0x0176 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SSDT @ 0x0x7d4ff840/0x01B7 (v 1 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d4ffc49/0x01B7 (v 1 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d500052/0x0140 (v 1 DpgPmm CpuPm 0x00000010 INTL 0x20= 050624) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: level lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: random: nfslock: pseudo-device io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 15 2008 16:11:= 52) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8de3000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000098 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D29b08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/0 1/0 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: fetching _PRT pcib0: adding pci bus child device pcib0: force attaching PCI link devices found in _PRT pcib0: attaching the PCI child bus device pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x29b0, revid=3D0x02 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x29b2, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xfea00000, size 19, enabled map[14]: type I/O Port, range 32, base 0xec90, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled map[1c]: type Memory, range 32, base 0xfeb00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b3, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfea80000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x29b4, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D07-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfedad000, size 4, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b6, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D2 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xfe80, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabled map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled map[20]: type I/O Port, range 32, base 0xfef0, size 4, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x29b7, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D3 class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xec98, size 3, enabled map[14]: type Memory, range 32, base 0xfe9da000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x10bd, revid=3D0x02 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe9e0000, size 17, enabled map[14]: type Memory, range 32, base 0xfe9db000, size 12, enabled map[18]: type I/O Port, range 32, base 0xecc0, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 21 found-> vendor=3D0x8086, dev=3D0x2937, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2938, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x293c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe9d9c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=3D0x8086, dev=3D0x293e, revid=3D0x02 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe9dc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2940, revid=3D0x02 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2934, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x2935, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x2936, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x293a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff980800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x92 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2914, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2922, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled map[20]: type I/O Port, range 32, base 0xfec0, size 5, enabled map[24]: type Memory, range 32, base 0xff970000, size 11, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x2930, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[10]: type Memory, range 64, base 0xfe9d9b00, size 8, enabled map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: port 0xec90-0xec97 mem 0xfea00000-0xfea7f= fff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0 vgapci1: mem 0xfea80000-0xfeafffff at device 2.1 o= n pci0 pci0: at device 3.0 (no driver attached) atapci0: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xf= ea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfef0 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe80 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90 ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfea0 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfeb0 ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 3.3 (no driver attached) em0: port 0xecc0-0xe= cdf mem 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 o= n pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 50 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe9db000 em0: bpf attached em0: Ethernet address: 00:1a:a0:62:96:09 em0: [FILTER] uhci0: port 0xff20-0xff3f irq 16 at device = 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xff00-0xff1f irq 17 at device = 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfe9d9c00-0xfe9d9fff irq 22= at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe9d9c00 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: wrong number of companions (3 !=3D 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered pcm0: mem 0xfe9dc000-0xfe9d= ffff irq 16 at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=3D0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe9dc000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: hdac_dma_alloc: size=3D1024 -> roundsz=3D1024 pcm0: hdac_dma_alloc: size=3D2048 -> roundsz=3D2048 pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfe800000-0xfe8fffff pcib1: no prefetched decode pcib1: fetching _PRT pcib1: adding pci bus child device pcib1: force attaching PCI link devices found in _PRT pcib1: attaching the PCI child bus device pci1: on pcib1 pci1: domain=3D0, physical bus=3D1 uhci2: port 0xff80-0xff9f irq 23 at device = 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xff60-0xff7f irq 17 at device = 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xff40-0xff5f irq 18 at device = 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xff980800-0xff980bff irq 23= at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: waiting for BIOS to give up control usb6: timed out waiting for BIOS usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ~ [EOT] localhost(6.3-S)[2] ^D=08=08exit Script done on Mon Mar 24 15:07:43 2008 --Avw2VvEbzfULB0h1 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="optiplex_755.nohang" Content-Transfer-Encoding: quoted-printable Script started on Mon Mar 24 15:07:47 2008 localhost(6.3-S)[1] tip com1 can't open log file /var/log/aculog. =07connected /boot.config: -DP FreeBSD/i386 boot Default: 0:ad(0,a)/boot/loader boot: /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Consoles: intern= al video/keyboard serial port =20 BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 633kB/2052094kB available memory FreeBSD/i386 bootstrap loader, Revision 1.1 (root@dwolf-lnx.jnpr.net, Tue Feb 12 23:46:19 UTC 2008) |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08Loading /boot/defaults/loader.conf=20 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08/boot/kernel/kernel text=3D0x7e7224 |=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08data=3D0xd3fc0+0xab73c -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08syms=3D[0x4+0x8d6f0|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0xbce97\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08] \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08=1B[H=1B[J=1B[4;46H ______=1B[5;46H | ____| __ ___ ___ =1B[= 6;46H | |__ | '__/ _ \/ _ \=1B[7;46H | __|| | | __/ __/=1B[8;46H = | | | | | | |=1B[9;46H |_| |_| \___|\___|=1B[10;46H ___= _ _____ _____=1B[11;46H | _ \ / ____| __ \=1B[12;46H | |_) | (___= | | | |=1B[13;46H | _ < \___ \| | | |=1B[14;46H | |_) |____) | |_= _| |=1B[15;46H | | | |=1B[16;46H |____/|_____/|_____/= =1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H= =B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3= =1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B= [3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;= 44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[= 15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3= =1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22= ;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4= =C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0= =1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome to FreeBSD!=1B[9;5H1 =1B[9;6H. Bo= ot FreeBSD [default]=1B[10;5H2 =1B[10;6H. Boot FreeBSD with ACPI disabled= =1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe Mode=1B[12;5H4 =1B[12;6H. Boot F= reeBSD in single user mode=1B[13;5H5 =1B[13;6H. Boot FreeBSD with verbose l= ogging=1B[14;5H6 =1B[14;6H. Escape to loader prompt=1B[15;5H7 =1B[15;6H. Re= boot=1B[20;5HSelect option, [Enter] for default=1B[21;5Hor [Space] to pause= timer =1B[21;32H10 =1B[25;0H|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/boot/kernel/acp= i.ko text=3D0x53e6c /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08data=3D0x25e0+0x186c -=08\=08syms=3D[0x4+0x8= 9f0|=08/=08+0x4+0xbb87-=08\=08|=08] /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009e400 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D000000007d3ff800 SMAP type=3D04 base=3D000000007d4ff800 len=3D0000000000054400 SMAP type=3D03 base=3D000000007d553c00 len=3D0000000000002000 SMAP type=3D02 base=3D000000007d555c00 len=3D0000000000aaa400 SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000 SMAP type=3D02 base=3D00000000f0000000 len=3D000000000ec00000 SMAP type=3D02 base=3D00000000fed00000 len=3D0000000000000400 SMAP type=3D02 base=3D00000000fed20000 len=3D0000000000080000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000100000 SMAP type=3D02 base=3D00000000ffb00000 len=3D0000000000500000 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f20000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f201d8. Calibrating clock(s) ... i8254 clock: 1193185 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1994997410 Hz CPU: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz (1995.00-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x6fd Stepping =3D 13 Features=3D0xbfebfbff Features2=3D0xe39d AMD Features=3D0x20000000 AMD Features2=3D0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory =3D 2102390784 (2004 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000007b365fff, 2050232320 bytes (500545 pages) avail memory =3D 2049662976 (1954 MB) Table 'FACP' at 0xfc72b Table 'SSDT' at 0xfff70f4c Table 'APIC' at 0xfc81f MADT: Found table at 0xfc81f MP Configuration Table version 1.4 found at 0xc00f0000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 5 ACPI ID 3: disabled MADT: Found CPU APIC ID 7 ACPI ID 4: disabled MADT: Found CPU APIC ID 0 ACPI ID 5: disabled MADT: Found CPU APIC ID 1 ACPI ID 6: disabled MADT: Found CPU APIC ID 2 ACPI ID 7: disabled MADT: Found CPU APIC ID 3 ACPI ID 8: disabled ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00ffe90 bios32: Entry =3D 0xffea0 (c00ffea0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xb09f pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xfec00/0x0024 (v 2 DELL ) ACPI: XSDT @ 0x0xfc5fb/0x008C (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: FACP @ 0x0xfc72b/0x00F4 (v 3 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: DSDT @ 0x0xfff6c8a7/0x4586 (v 1 DELL dt_ex 0x00001000 INTL 0x20= 050624) ACPI: FACS @ 0x0x7d4ff800/0x0040 ACPI: SSDT @ 0x0xfff70f4c/0x00AA (v 1 DELL st_ex 0x00001000 INTL 0x20= 050624) ACPI: APIC @ 0x0xfc81f/0x0092 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: BOOT @ 0x0xfc8b1/0x0028 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ASF! @ 0x0xfc8d9/0x0096 (v 32 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: MCFG @ 0x0xfc96f/0x003E (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: HPET @ 0x0xfc9ad/0x0038 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: TCPA @ 0x0xfcc09/0x0032 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: ____ @ 0x0xfcc3b/0x0030 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SLIC @ 0x0xfc9e5/0x0176 (v 1 DELL B9K 0x0000000D ASL 0x00000= 061) ACPI: SSDT @ 0x0x7d4ff840/0x01B7 (v 1 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d4ffc49/0x01B7 (v 1 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050624) ACPI: SSDT @ 0x0x7d500052/0x0140 (v 1 DpgPmm CpuPm 0x00000010 INTL 0x20= 050624) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 8 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: level lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 ath_rate: version 1.2 wlan_amrr: wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: random: nfslock: pseudo-device io: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb 15 2008 16:11:= 52) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8de3000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000098 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D29b08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P40C -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.PCI0.ISA_.P41C -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/0 1/1 1/1 1/1 1/1 1/1 1/1 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64= -bit Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pcib0: fetching _PRT pcib0: adding pci bus child device pcib0: force attaching PCI link devices found in _PRT pcib0: attaching the PCI child bus device pci0: on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x29b0, revid=3D0x02 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x29b2, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xfea00000, size 19, enabled map[14]: type I/O Port, range 32, base 0xec90, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled map[1c]: type Memory, range 32, base 0xfeb00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b3, revid=3D0x02 domain=3D0, bus=3D0, slot=3D2, func=3D1 class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfea80000, size 19, enabled found-> vendor=3D0x8086, dev=3D0x29b4, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D07-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfedad000, size 4, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x29b6, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D2 class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xfe80, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe90, size 2, enabled map[18]: type I/O Port, range 32, base 0xfea0, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfeb0, size 2, enabled map[20]: type I/O Port, range 32, base 0xfef0, size 4, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x29b7, revid=3D0x02 domain=3D0, bus=3D0, slot=3D3, func=3D3 class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0xec98, size 3, enabled map[14]: type Memory, range 32, base 0xfe9da000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x10bd, revid=3D0x02 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D3 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe9e0000, size 17, enabled map[14]: type Memory, range 32, base 0xfe9db000, size 12, enabled map[18]: type I/O Port, range 32, base 0xecc0, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 21 found-> vendor=3D0x8086, dev=3D0x2937, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2938, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x293c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D26, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfe9d9c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=3D0x8086, dev=3D0x293e, revid=3D0x02 domain=3D0, bus=3D0, slot=3D27, func=3D0 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe9dc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2940, revid=3D0x02 domain=3D0, bus=3D0, slot=3D28, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=3D0x8086, dev=3D0x2934, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x2935, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=3D0x8086, dev=3D0x2936, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x293a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff980800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x92 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2914, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2922, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D2 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) limer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled map[20]: type I/O Port, range 32, base 0xfec0, size 5, enabled map[24]: type Memory, range 32, base 0xff970000, size 11, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=3D0x8086, dev=3D0x2930, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D9 map[10]: type Memory, range 64, base 0xfe9d9b00, size 8, enabled map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: port 0xec90-0xec97 mem 0xfea00000-0xfea7f= fff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16 at device 2.0 on pci0 vgapci1: mem 0xfea80000-0xfeafffff at device 2.1 o= n pci0 pci0: at device 3.0 (no driver attached) atapci0: port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xf= ea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq 18 at device 3.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfef0 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe80 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe90 ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfea0 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfeb0 ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 3.3 (no driver attached) em0: port 0xecc0-0xe= cdf mem 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 o= n pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 50 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfe9db000 em0: bpf attached em0: Ethernet address: 00:1a:a0:62:96:09 em0: [FILTER] uhci0: port 0xff20-0xff3f irq 16 at device = 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xff00-0xff1f irq 17 at device = 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xfe9d9c00-0xfe9d9fff irq 22= at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe9d9c00 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 !=3D 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered pcm0: mem 0xfe9dc000-0xfe9d= ffff irq 16 at device 27.0 on pci0 pcm0: TCSEL: 0x07 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=3D0x8086 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe9dc000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: hdac_dma_alloc: size=3D1024 -> roundsz=3D1024 pcm0: hdac_dma_alloc: size=3D2048 -> roundsz=3D2048 pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfe800000-0xfe8fffff pcib1: no prefetched decode pcib1: fetching _PRT pcib1: adding pci bus child device pcib1: force attaching PCI link devices found in _PRT pcib1: attaching the PCI child bus device pci1: on pcib1 pci1: domain=3D0, physical bus=3D1 uhci2: port 0xff80-0xff9f irq 23 at device = 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0xff60-0xff7f irq 17 at device = 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0xff40-0xff5f irq 18 at device = 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xff980800-0xff980bff irq 23= at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff980800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pcib2: fetching _PRT pcib2: adding pci bus child device pcib2: force attaching PCI link devices found in _PRT pcib2: attaching the PCI child bus device pci2: on pcib2 pci2: domain=3D0, physical bus=3D2 isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0xfe00-0xfe07,0xfe10-= 0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff = irq 18 at device 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfec0 atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff970000 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI Version 01.20 controller with 6 ports detected ata4: on atapci1 ata4: SATA connect time=3D0ms ata4: SIGNATURE: 00000101 ata4: ahci_reset devices=3D0x1 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci1 ata5: SATA connect time=3D0ms ata5: SIGNATURE: eb140101 ata5: ahci_reset devices=3D0x4 ata5: [MPSAFE] ata5: [ITHREAD] ata6: on atapci1 ata6: SATA connect status=3D00000004 ata6: ahci_reset devices=3D0x0 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci1 ata7: SATA connect status=3D00000004 ata7: ahci_reset devices=3D0x0 ata7: [MPSAFE] ata7: [ITHREAD] ata8: on atapci1 ata8: port not implemented ata8: [MPSAFE] ata8: [ITHREAD] ata9: on atapci1 ata9: SATA connect status=3D00000004 ata9: ahci_reset devices=3D0x0 ata9: [MPSAFE] ata9: [ITHREAD] ichsmb0: port 0xece0-0xecff mem 0xfe9d9b00-0xfe9d9bff ir= q 18 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xece0 ichsmb0: [GIANT-LOCKED] ichsmb0: [ITHREAD] smbus0: on ichsmb0 smb0: on smbus0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0xc29 0xc39 0xc29 0xc29 sio0: irq maps: 0xc29 0xc39 0xc29 0xc29 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcb7ff,0xcb800-0xcd7ff,0xcd800-0x= cffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57 ata0: [MPSAFE] ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58 ata1: [MPSAFE] ata1: [ITHREAD] atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: RESET_KBD return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0045 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xca9 0xca9 0xca9 0xca9 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ums0: on uhub4 ums0: 3 buttons and Z dir. ukbd0: on uhub4 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 Device configuration finished. Reducing kern.maxvnodes 131531 -> 100000 procfs registered lapic: Divisor 2, Frequency 99749879 hz Timecounter "TSC" frequency 1994997410 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata4-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire ad8: 76293MB at ata4-master SATA300 ad8: 156250000 sectors [155009C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Intel check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire ata5: device_reset timeout=3D480us acd0: CDRW drive at ata5 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: HDA_DEBUG: HDA Config: on=3D0x00000000 off=3D0x00000000 pcm0: HDA_DEBUG: Starting CORB Engine... pcm0: HDA_DEBUG: Starting RIRB Engine... pcm0: HDA_DEBUG: Enabling controller interrupt... pcm0: HDA_DEBUG: Scanning HDA codecs [start index=3D0] ... pcm0: HDA_DEBUG: Probing codec: 0 pcm0: HDA_DEBUG: startnode=3D1 endnode=3D2 pcm0: HDA_DEBUG: Found AFG nid=3D1 [startnode=3D1 endnode=3D2] pcm0: HDA_DEBUG: Parsing AFG nid=3D1 cad=3D0 pcm0: Vendor: 0x000011d4 pcm0: Device: 0x00001984 pcm0: Revision: 0x00000004 pcm0: Stepping: 0x00000000 pcm0: PCI Subvendor: 0x02111028 pcm0: Nodes: start=3D2 endnode=3D39 total=3D37 pcm0: CORB size: 256 pcm0: RIRB size: 256 pcm0: Streams: ISS=3D4 OSS=3D4 BSS=3D0 pcm0: GPIO: 0x40000003 pcm0: NumGPIO=3D3 NumGPO=3D0 NumGPI=3D0 GPIWake=3D0 GPIUnsol= =3D1 pcm0: hdac_widget_connection_parse: GHOST: nid=3D2 j=3D0 entnum=3D4 index= =3D0 res=3D0x00090801 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D2 entries=3D3 found=3D3 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D5 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D6 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D7 entries=3D2 found=3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D8 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D9 entries=3D1 found=3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D10 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D11 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D12 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D13 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D14 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D15 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D17 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D18 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D19 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D22 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D25 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D27 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D28 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D29 entries=3D10 found= =3D25 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D30 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D31 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D32 entries=3D4 found= =3D5 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D33 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D34 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D35 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D36 entries=3D2 found= =3D2 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D37 entries=3D1 found= =3D1 pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3D38 entries=3D3 found= =3D3 pcm0: HDA_DEBUG: Parsing Ctls... pcm0: HDA_DEBUG: Parsing vendor patch... pcm0: HDA_DEBUG: Building AFG tree... pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1 pcm0: HDA_DEBUG: HWiP: Found 3 DAC path using HDA_PARSE_MIXER strategy. pcm0: HDA_DEBUG: AFG commit... pcm0: HDA_DEBUG: Ctls commit... pcm0: [ 3] Ctl nid=3D5 Bind to NONE pcm0: [ 4] Ctl nid=3D6 Bind to NONE pcm0: [ 5] Ctl nid=3D7 childnid=3D34 Bind to NONE pcm0: [ 6] Ctl nid=3D7 childnid=3D33 Bind to NONE pcm0: [ 8] Ctl nid=3D10 childnid=3D33 Bind to NONE pcm0: [ 9] Ctl nid=3D11 childnid=3D15 Bind to NONE pcm0: [10] Ctl nid=3D11 childnid=3D33 Bind to NONE pcm0: [14] Ctl nid=3D17 Bind to NONE pcm0: [15] Ctl nid=3D18 Bind to NONE pcm0: [16] Ctl nid=3D19 Bind to NONE pcm0: [17] Ctl nid=3D20 Bind to NONE pcm0: [18] Ctl nid=3D21 Bind to NONE pcm0: [19] Ctl nid=3D22 DISABLED pcm0: [20] Ctl nid=3D27 DISABLED pcm0: [21] Ctl nid=3D28 DISABLED pcm0: [22] Ctl nid=3D30 childnid=3D14 Bind to NONE pcm0: [23] Ctl nid=3D30 childnid=3D33 Bind to NONE pcm0: [26] Ctl nid=3D32 childnid=3D22 DISABLED pcm0: [27] Ctl nid=3D32 childnid=3D26 DISABLED pcm0: [28] Ctl nid=3D32 childnid=3D37 Bind to NONE pcm0: [29] Ctl nid=3D33 Bind to NONE pcm0: [30] Ctl nid=3D36 childnid=3D35 Bind to NONE pcm0: [31] Ctl nid=3D36 childnid=3D33 Bind to NONE pcm0: [32] Ctl nid=3D37 Bind to NONE pcm0: HDA_DEBUG: PCMDIR_PLAY setup... pcm0: HDA_DEBUG: PCMDIR_REC setup... pcm0: HDA_DEBUG: OSS mixer initialization... pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: HDA_DEBUG: Registering PCM channels... pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: hdac_dma_alloc: size=3D4096 -> roundsz=3D4096 pcm0: sndbuf_setmap 172c000, 4000; 0xe5748000 -> 172c000 pcm0: hdac_dma_alloc: size=3D4096 -> roundsz=3D4096 pcm0: sndbuf_setmap 1734000, 4000; 0xe574c000 -> 1734000 pcm0: pcm0: pcm0: pcm0:=20 pcm0: HDA config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0:=20 pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | pcm0: +-------------------+ pcm0:=20 pcm0: Default Parameter pcm0: ----------------- pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: IN amp: 0x80000000 pcm0: OUT amp: 0x00052727 pcm0:=20 pcm0: nid: 2 [DIGITAL] [DISABLED] pcm0: name: audio output pcm0: widget_cap: 0x00030311 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 3 pcm0: | pcm0: + <- nid=3D1 [GHOST!] [UNKNOWN] pcm0: | pcm0: + <- nid=3D8 [audio input] pcm0: | pcm0: + <- nid=3D9 [audio input] pcm0:=20 pcm0: nid: 3 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x00000405 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Output amp: 0x00052727 pcm0: mute=3D0 step=3D39 size=3D5 offset=3D39 pcm0: connections: 0 pcm0:=20 pcm0: nid: 4 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x00000405 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Output amp: 0x00052727 pcm0: mute=3D0 step=3D39 size=3D5 offset=3D39 pcm0: connections: 0 pcm0:=20 pcm0: nid: 5 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x0010050b pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Input amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D23 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 6 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x0010050b pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: Input amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D24 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 7 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x000000d1 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D34 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 8 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x00100501 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D12 [audio selector] pcm0:=20 pcm0: nid: 9 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x00100501 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D13 [audio selector] pcm0:=20 pcm0: nid: 10 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 11 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D15 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 12 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000800 pcm0: Output amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 13 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000800 pcm0: Output amp: 0x80053627 pcm0: mute=3D1 step=3D54 size=3D5 offset=3D39 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 14 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 15 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 16 [ANALOG] pcm0: name: beep widget pcm0: widget_cap: 0x0070000c pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: Output amp: 0x800b0f0f pcm0: mute=3D1 step=3D15 size=3D11 offset=3D15 pcm0: connections: 0 pcm0:=20 pcm0: nid: 17 [ANALOG] pcm0: name: pin: headphones out (jack) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000001f pcm0: ISC TRQD HP OUT : UNSOL pcm0: Pin config: 0x02214040 pcm0: Pin control: 0x000000c0 HP OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D7 [audio mixer] pcm0:=20 pcm0: nid: 18 [ANALOG] pcm0: name: pin: line out (jack) pcm0: widget_cap: 0x0040058d pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0001001f pcm0: ISC TRQD HP OUT EAPD : UNSOL pcm0: Pin config: 0x01014010 pcm0: Pin control: 0x00000040 OUT pcm0: EAPD: 0x00000002 pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D10 [audio mixer] pcm0:=20 pcm0: nid: 19 [ANALOG] pcm0: name: pin: speaker (fixed) pcm0: widget_cap: 0x0040050c pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00010010 pcm0: OUT EAPD pcm0: Pin config: 0x991301f0 pcm0: Pin control: 0x00000040 OUT pcm0: EAPD: 0x00000002 pcm0: Output amp: 0x80051f1f pcm0: mute=3D1 step=3D31 size=3D5 offset=3D31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D31 [audio mixer] pcm0:=20 pcm0: nid: 20 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x0040008b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Pin cap: 0x00003727 pcm0: ISC TRQD IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x02a19020 pcm0: Pin control: 0x00000025 IN pcm0: Input amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 0 pcm0:=20 pcm0: nid: 21 [ANALOG] pcm0: name: pin: line in (jack) pcm0: widget_cap: 0x0040008b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000041 pcm0: Pin cap: 0x00003727 pcm0: ISC TRQD IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x01813030 pcm0: Pin control: 0x00000025 IN pcm0: Input amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 0 pcm0:=20 pcm0: nid: 22 [ANALOG] [DISABLED] pcm0: name: pin: CD (none) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000037 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x413301f0 pcm0: Pin control: 0x00000060 IN OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D11 [audio mixer] pcm0:=20 pcm0: nid: 23 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41a601f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 24 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41a601f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 25 [ANALOG] pcm0: name: power widget pcm0: widget_cap: 0x00500500 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D32 [audio mixer] (selected) pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 26 [ANALOG] [DISABLED] pcm0: name: pin: other (none) pcm0: widget_cap: 0x00400000 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x41f301f0 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0:=20 pcm0: nid: 27 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF out (none) pcm0: widget_cap: 0x0040030d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x414511f0 pcm0: Pin control: 0x00000040 OUT pcm0: Output amp: 0x80052727 pcm0: mute=3D1 step=3D39 size=3D5 offset=3D39 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D2 [audio output] [DISABLED] pcm0:=20 pcm0: nid: 28 [ANALOG] [DISABLED] pcm0: name: pin: Mic in (none) pcm0: widget_cap: 0x0040018d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00003737 pcm0: ISC TRQD OUT IN VREF[ 50 80 100 GROUND HIZ ] : UNSOL pcm0: Pin config: 0x41a190f0 pcm0: Pin control: 0x00000060 IN OUT pcm0: Output amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D36 [audio mixer] pcm0:=20 pcm0: nid: 29 [ANALOG] pcm0: name: vendor widget pcm0: widget_cap: 0x00f00100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 25 pcm0: | pcm0: + <- nid=3D7 [audio mixer] (selected) pcm0: | pcm0: + <- nid=3D25 [power widget] pcm0: | pcm0: + <- nid=3D10 [audio mixer] pcm0: | pcm0: + <- nid=3D11 [audio mixer] pcm0: | pcm0: + <- nid=3D12 [audio selector] pcm0: | pcm0: + <- nid=3D13 [audio selector] pcm0: | pcm0: + <- nid=3D14 [audio selector] pcm0: | pcm0: + <- nid=3D15 [audio selector] pcm0: | pcm0: + <- nid=3D26 [pin: other (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D17 [pin: headphones out (jack)] pcm0: | pcm0: + <- nid=3D18 [pin: line out (jack)] pcm0: | pcm0: + <- nid=3D19 [pin: speaker (fixed)] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D30 [audio mixer] pcm0: | pcm0: + <- nid=3D31 [audio mixer] pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0: | pcm0: + <- nid=3D34 [audio selector] pcm0: | pcm0: + <- nid=3D35 [audio selector] pcm0: | pcm0: + <- nid=3D36 [audio mixer] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0: | pcm0: + <- nid=3D38 [vendor widget] pcm0:=20 pcm0: nid: 30 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D14 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 31 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200100 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D30 [audio mixer] pcm0:=20 pcm0: nid: 32 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x0020010b pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x000000c1 pcm0: Input amp: 0x80051f17 pcm0: mute=3D1 step=3D31 size=3D5 offset=3D23 pcm0: connections: 5 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D22 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D26 [pin: other (none)] [DISABLED] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid: 33 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x000000c1 pcm0: Output amp: 0x80051f1f pcm0: mute=3D1 step=3D31 size=3D5 offset=3D31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D32 [audio mixer] pcm0:=20 pcm0: nid: 34 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 35 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D3 [audio output] (selected) pcm0: | pcm0: + <- nid=3D4 [audio output] pcm0:=20 pcm0: nid: 36 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200103 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Input amp: 0x80000000 pcm0: mute=3D1 step=3D0 size=3D0 offset=3D0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3D35 [audio selector] pcm0: | pcm0: + <- nid=3D33 [audio selector] pcm0:=20 pcm0: nid: 37 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x00270300 pcm0: mute=3D0 step=3D3 size=3D39 offset=3D0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: nid: 38 [ANALOG] pcm0: name: vendor widget pcm0: widget_cap: 0x00f00100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 3 pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] pcm0: | pcm0: + <- nid=3D28 [pin: Mic in (none)] [DISABLED] pcm0:=20 pcm0: +------------------------+ pcm0: | DUMPING HDA AMPLIFIERS | pcm0: +------------------------+ pcm0:=20 pcm0: 1: nid=3D3 dir=3D0x1 index=3D0 ossmask=3D0x00000011 ossdev=3D4 pcm0: 2: nid=3D4 dir=3D0x1 index=3D0 ossmask=3D0x00000011 ossdev=3D4 pcm0: 3: nid=3D5 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 4: nid=3D6 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 5: nid=3D7 cnid=3D34 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossde= v=3D0 pcm0: 6: nid=3D7 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossde= v=3D0 pcm0: 7: nid=3D10 cnid=3D4 dir=3D0x2 index=3D0 ossmask=3D0x00000011 ossde= v=3D4 pcm0: 8: nid=3D10 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 9: nid=3D11 cnid=3D15 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 10: nid=3D11 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 11: nid=3D12 dir=3D0x1 index=3D0 ossmask=3D0x00000800 ossdev=3D0 pcm0: 12: nid=3D13 dir=3D0x1 index=3D0 ossmask=3D0x00000800 ossdev=3D0 pcm0: 13: nid=3D16 dir=3D0x1 index=3D0 ossmask=3D0x00000021 ossdev=3D5 pcm0: 14: nid=3D17 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 15: nid=3D18 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 16: nid=3D19 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 17: nid=3D20 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 18: nid=3D21 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 19: nid=3D22 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 20: nid=3D27 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 21: nid=3D28 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 [DI= SABLED] pcm0: 22: nid=3D30 cnid=3D14 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 23: nid=3D30 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 24: nid=3D32 cnid=3D20 dir=3D0x2 index=3D0 ossmask=3D0x00000081 ossd= ev=3D7 pcm0: 25: nid=3D32 cnid=3D21 dir=3D0x2 index=3D1 ossmask=3D0x00000041 ossd= ev=3D6 pcm0: 26: nid=3D32 cnid=3D22 dir=3D0x2 index=3D2 ossmask=3D0x00000000 ossd= ev=3D0 [DISABLED] pcm0: 27: nid=3D32 cnid=3D26 dir=3D0x2 index=3D3 ossmask=3D0x00000000 ossd= ev=3D0 [DISABLED] pcm0: 28: nid=3D32 cnid=3D37 dir=3D0x2 index=3D4 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 29: nid=3D33 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0: 30: nid=3D36 cnid=3D35 dir=3D0x2 index=3D0 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 31: nid=3D36 cnid=3D33 dir=3D0x2 index=3D1 ossmask=3D0x00000000 ossd= ev=3D0 pcm0: 32: nid=3D37 dir=3D0x1 index=3D0 ossmask=3D0x00000000 ossdev=3D0 pcm0:=20 pcm0: +-----------------------------------+ pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS | pcm0: +-----------------------------------+ pcm0:=20 pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- nid: 3 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 4 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 10 index: 0 (nid: 4) mute: 1 step: 0 size: 0 off: = 0 dir=3D0x2 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 16 index: 0 mute: 1 step: 15 size: 11 off: = 15 dir=3D0x1 ossmask=3D0x00000021 pcm0: | pcm0: +- nid: 32 index: 0 (nid: 20) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000081 pcm0: | pcm0: +- nid: 32 index: 1 (nid: 21) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000041 pcm0:=20 pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- nid: 3 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 4 index: 0 mute: 0 step: 39 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000011 pcm0: | pcm0: +- nid: 10 index: 0 (nid: 4) mute: 1 step: 0 size: 0 off: = 0 dir=3D0x2 ossmask=3D0x00000011 pcm0:=20 pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- nid: 32 index: 0 (nid: 20) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000081 pcm0:=20 pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- nid: 32 index: 1 (nid: 21) mute: 1 step: 31 size: 5 off: = 23 dir=3D0x2 ossmask=3D0x00000041 pcm0:=20 pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- nid: 12 index: 0 mute: 1 step: 54 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000800 pcm0: | pcm0: +- nid: 13 index: 0 mute: 1 step: 54 size: 5 off: = 39 dir=3D0x1 ossmask=3D0x00000800 pcm0:=20 pcm0: Speaker/Beep (OSS: speaker) pcm0: | pcm0: +- nid: 16 index: 0 mute: 1 step: 15 size: 11 off: = 15 dir=3D0x1 ossmask=3D0x00000021 pcm0:=20 pcm0: Playback path: pcm0:=20 pcm0: nid=3D17 [pin: headphones out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D7 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D34 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3D3 [audio output] pcm0:=20 pcm0: nid=3D18 [pin: line out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D10 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D4 [audio output] pcm0:=20 pcm0: nid=3D19 [pin: speaker (fixed)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=3D31 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D30 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=3D14 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3D3 [audio output] pcm0:=20 pcm0: Recording sources: pcm0:=20 pcm0: nid=3D12 [audio selector] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=3D32 [audio mixer] [recsrc: vol, line, mic] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: nid=3D13 [audio selector] pcm0: | pcm0: + <- nid=3D20 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: | pcm0: + <- nid=3D21 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=3D32 [audio mixer] [recsrc: vol, line, mic] pcm0: | pcm0: + <- nid=3D37 [audio selector] pcm0:=20 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0:=20 pcm0: PCM Playback: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: DAC: 3 4 pcm0:=20 pcm0: PCM Record: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07ff pcm0: PCM size: 16 20 24 pcm0: PCM rate: 8 11 16 22 32 44 48 88 96 176 192 pcm0: ADC: 8 9 ATA PseudoRAID loaded lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 0 ioapic0: Assigning ISA IRQ 7 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 msi: Assigning MSI IRQ 256 to local APIC 0 WARNING: WITNESS option enabled, expect reduced performance. GEOM: new disk ad8 lock order reversal: 1st 0xc525a278 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2061 2nd 0xc5221a94 devfsmount (devfsmount) @ /usr/src/sys/fs/devfs/devfs_vnops= .c:201 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a47bbc,c083df5e,c0bb43b4,c5221a94,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c5221a94,c0ba59a4,c0ba59a4,c0ba59e5,...) at kdb_back= trace+0x29 witness_checkorder(c5221a94,9,c0ba59e5,c9,c7,...) at witness_checkorder+0x6= de _sx_xlock(c5221a94,0,c0ba59e5,c9,c5221a94,...) at _sx_xlock+0x7d devfs_allocv(c521b980,c5259000,e3a47c28,c4e72cc0,c0bba0ab,...) at devfs_all= ocv+0x144 devfs_root(c5259000,2,c0d41898,c4e72cc0,ca,...) at devfs_root+0x51 set_rootvnode(c0d41880,0,c0bba0ab,5ed,c087b530,...) at set_rootvnode+0x2b vfs_mountroot(c0cef490,4,c0ba9e35,260,0,...) at vfs_mountroot+0x356 start_init(0,e3a47d38,c0bab743,30c,c4e70ab0,...) at start_init+0x65 fork_exit(c07cd650,0,e3a47d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xe3a47d70, ebp =3D 0 --- Trying to mount root from ufs:/dev/ad8s4a lock order reversal: 1st 0xc506bd18 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2061 2nd 0xc5259000 vfslock (vfslock) @ /usr/src/sys/kern/vfs_subr.c:364 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a479dc,c083df5e,c0bb43b4,c5259000,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c5259000,c0bba1a9,c0bba1a9,c0bba746,...) at kdb_back= trace+0x29 witness_checkorder(c5259000,1,c0bba746,16c,e3a47a1c,...) at witness_checkor= der+0x6de _lockmgr(c5259000,2001,c5259030,c0bba746,16c,...) at _lockmgr+0x1e5 vfs_busy(c5259000,0,0,c4e72cc0,e3a47b50,...) at vfs_busy+0x198 lookup(e3a47b3c,c0bb9e59,c6,bf,c4e4242c,...) at lookup+0x7b4 namei(e3a47b3c,c4e72d54,c0c87e64,c0bba0ab,c5259030,...) at namei+0x34b kern_unlink(c4e72cc0,c0bba4e8,1,628,0,...) at kern_unlink+0x40 vfs_mountroot_try(c0bba6a2,c0ba8b5b,c0ba1a9b,1,c087b530,...) at vfs_mountro= ot_try+0x480 vfs_mountroot(c0cef490,4,c0ba9e35,260,0,...) at vfs_mountroot+0x418 start_init(0,e3a47d38,c0bab743,30c,c4e70ab0,...) at start_init+0x65 fork_exit(c07cd650,0,e3a47d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xe3a47d70, ebp =3D 0 --- start_init: trying /sbin/init lock order reversal: 1st 0xc4e76044 user map (user map) @ /usr/src/sys/vm/vm_map.c:3111 2nd 0xc506baf8 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2061 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e3a479d0,c083df5e,c0bb43b4,c506baf8,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c506baf8,c0ba940e,c0ba940e,c0bba746,...) at kdb_back= trace+0x29 witness_checkorder(c506baf8,1,c0bba746,80d,e3a47a04,...) at witness_checkor= der+0x6de _lockmgr(c506baf8,3041,c506bb28,c0bba746,80d,...) at _lockmgr+0x1e5 ffs_lock(e3a47a78,c07f6a5d,c0cfaa74,3041,c506baa0,...) at ffs_lock+0x8a VOP_LOCK1_APV(c0ca39a0,e3a47a78,c0ba8b59,3,c506bb28,...) at VOP_LOCK1_APV+0= xa5 _vn_lock(c506baa0,3041,c0bba746,80d,0,...) at _vn_lock+0xf2 vget(c506baa0,3041,c4e72cc0,4a9,c1460480,...) at vget+0x109 vnode_pager_lock(c1460300,0,c0bd1c78,127,e3a47be8,...) at vnode_pager_lock+= 0x1ad vm_fault(c4e76000,80d3000,2,8,80d3800,...) at vm_fault+0x1df trap_pfault(5,0,c0bdffec,2c8,c4e70ab0,...) at trap_pfault+0x118 trap(e3a47d38) at trap+0x267 calltrap() at calltrap+0x6 --- trap 0xc, eip =3D 0x80480e5, esp =3D 0xbfbfeef0, ebp =3D 0xbfbfef10 --- em0: Link is up 100 Mbps Full Duplex em0: link state changed to UP obreak: MAP_WIREFUTURE set Linux ELF exec handler installed link_elf: symbol msleep undefined Linux ELF exec handler removed lock order reversal: 1st 0xc584b7d4 vfslock (vfslock) @ /usr/src/sys/kern/vfs_mount.c:1242 2nd 0xc582c5a8 syncer (syncer) @ /usr/src/sys/kern/vfs_subr.c:2156 KDB: stack backtrace: db_trace_self_wrapper(c0bb1f6a,e7a3cb30,c083df5e,c0bb43b4,c582c5a8,...) at = db_trace_self_wrapper+0x26 kdb_backtrace(c0bb43b4,c582c5a8,c0bbafcb,c0bbafcb,c0bba746,...) at kdb_back= trace+0x29 witness_checkorder(c582c5a8,9,c0bba746,86c,0,...) at witness_checkorder+0x6= de _lockmgr(c582c5a8,2002,c582c5d8,c0bba746,86c,...) at _lockmgr+0x509 vop_stdlock(e7a3cbc4,c0bba746,c083d828,2002,c582c550,...) at vop_stdlock+0x= 39 VOP_LOCK1_APV(c0c91740,e7a3cbc4,84f,e7a3cbe4,c582c5d8,...) at VOP_LOCK1_APV= +0xa5 _vn_lock(c582c550,2002,c0bba746,86c,0,...) at _vn_lock+0xf2 vrele(c582c550,0,c0bba0ab,4f0,4da,...) at vrele+0x142 dounmount(c584b7d4,0,c52bd440,489,0,...) at dounmount+0x372 unmount(c52bd440,e7a3ccfc,8,c0bb4ad7,c0c81a50,...) at unmount+0x2e0 syscall(e7a3cd38) at syscall+0x2b3 Xint0x80_syscall() at Xint0x80_syscall+0x20 --- syscall (22, FreeBSD ELF32, unmount), eip =3D 0x280eb2db, esp =3D 0xbfb= fea0c, ebp =3D 0xbfbfea28 --- Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 ~ [EOT] localhost(6.3-S)[2] ^D=08=08exit Script done on Mon Mar 24 15:11:33 2008 --Avw2VvEbzfULB0h1-- --RMorpr61ug7CvG36 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iEYEARECAAYFAkfofxYACgkQmprOCmdXAD3sbQCfZt+BH/lCheC1qymBO2Vzq2xH UsQAnRlQs+jFj998n2POalHonna3Cv2A =+LEH -----END PGP SIGNATURE----- --RMorpr61ug7CvG36-- From owner-freebsd-hardware@FreeBSD.ORG Tue Mar 25 19:41:33 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 61277106564A for ; Tue, 25 Mar 2008 19:41:33 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from speedfactory.net (mail.speedfactory.net [66.23.216.219]) by mx1.freebsd.org (Postfix) with ESMTP id 06BAA8FC17 for ; Tue, 25 Mar 2008 19:41:32 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (unverified [66.23.211.162]) by speedfactory.net (SurgeMail 3.8s) with ESMTP id 236713779-1834499 for multiple; Tue, 25 Mar 2008 15:40:14 -0400 Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.14.2/8.14.2) with ESMTP id m2PJePpI078956; Tue, 25 Mar 2008 15:40:25 -0400 (EDT) (envelope-from jhb@freebsd.org) From: John Baldwin To: David Wolfskill Date: Tue, 25 Mar 2008 15:17:50 -0400 User-Agent: KMail/1.9.7 References: <20080318171434.GA49159@bunrab.catwhisker.org> <200803211102.35682.jhb@freebsd.org> <20080325042703.GT75023@bunrab.catwhisker.org> In-Reply-To: <20080325042703.GT75023@bunrab.catwhisker.org> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_e/U6HQsF9cJZohu" Message-Id: <200803251517.50699.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Tue, 25 Mar 2008 15:40:26 -0400 (EDT) X-Virus-Scanned: ClamAV 0.91.2/6392/Tue Mar 25 08:44:02 2008 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.4 required=4.2 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Optiplex 755 hangs every other boot before 82801 Family Hub Interface to PCI Bridge probed X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Mar 2008 19:41:33 -0000 --Boundary-00=_e/U6HQsF9cJZohu Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Tuesday 25 March 2008 12:27:03 am David Wolfskill wrote: > On Fri, Mar 21, 2008 at 11:02:35AM -0400, John Baldwin wrote: > > ... > > Ok. Please apply the patch below and report back which printfs you see. > >... > > Here you go: > > ... > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-CURRENT #0: Fri Feb 15 16:13:31 PST 2008 > root@dwolf-bsd.jnpr.net:/common/S4/obj/usr/src/sys/DWOLF > WARNING: WITNESS option enabled, expect reduced performance. > ... > usb6: EHCI version 1.0 > usb6: companion controllers, 2 ports each: usb3 usb4 usb5 > usb6: on ehci1 > usb6: USB revision 2.0 > uhub6: on usb6 > uhub6: 6 ports with 6 removable, self powered > pcib2: at device 30.0 on pci0 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xf000-0xfff > pcib2: no prefetched decode > pcib2: Subtractively decoded bridge. > > > hang here on alternate boots < > > pcib2: fetching _PRT > pcib2: adding pci bus child device > pcib2: force attaching PCI link devices found in _PRT > pcib2: attaching the PCI child bus device > pci2: on pcib2 > pci2: domain=0, physical bus=2 > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci1: port 0xfe00-0xfe07,0xfe10-0xfe13, > 0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem 0xff970000-0xff9707ff irq 18 at de > vice 31.2 on pci0 > atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfec0 > atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xff970000 > atapci1: [MPSAFE] > atapci1: [ITHREAD] > .... > > > In case that wasn't sufficient detail, I've attached the "hang" > and "nohang" typescripts from the serial console. Ok, try updated patch (more debugging). -- John Baldwin --Boundary-00=_e/U6HQsF9cJZohu Content-Type: text/x-diff; charset="iso-8859-15"; name="pcib_debug.patch" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="pcib_debug.patch" Index: acpica/acpi.c =================================================================== RCS file: /usr/cvs/src/sys/dev/acpica/acpi.c,v retrieving revision 1.246 diff -u -r1.246 acpi.c --- acpica/acpi.c 10 Mar 2008 22:18:07 -0000 1.246 +++ acpica/acpi.c 25 Mar 2008 19:15:19 -0000 @@ -1766,6 +1766,7 @@ return (FALSE); buf.Pointer = NULL; buf.Length = ACPI_ALLOCATE_BUFFER; + device_printf(dev, "fetching ACPI object info\n"); error = AcpiGetObjectInfo(h, &buf); if (ACPI_FAILURE(error)) return (FALSE); @@ -1776,6 +1777,7 @@ ret = TRUE; /* Return true for 'present' and 'functioning' */ + device_printf(dev, "invoking ACPI_DEVICE_PRESENT\n"); if (ACPI_DEVICE_PRESENT(devinfo->CurrentStatus)) ret = TRUE; Index: acpica/acpi_pcib.c =================================================================== RCS file: /usr/cvs/src/sys/dev/acpica/acpi_pcib.c,v retrieving revision 1.60 diff -u -r1.60 acpi_pcib.c --- acpica/acpi_pcib.c 3 Dec 2005 21:17:17 -0000 1.60 +++ acpica/acpi_pcib.c 25 Mar 2008 19:13:42 -0000 @@ -138,6 +138,7 @@ * XXX: This isn't entirely correct since we may be a PCI bus * on a hot-plug docking station, etc. */ + device_printf(dev, "checking DeviceIsPresent\n"); if (!acpi_DeviceIsPresent(dev)) return_VALUE(ENXIO); @@ -147,6 +148,7 @@ * are several valid bridges in the field that do not have a _PRT, so * only warn about missing tables if bootverbose is set. */ + device_printf(dev, "fetching _PRT\n"); prt->Length = ACPI_ALLOCATE_BUFFER; status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt); if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND)) @@ -157,6 +159,7 @@ /* * Attach the PCI bus proper. */ + device_printf(dev, "adding pci bus child device\n"); if ((child = device_add_child(dev, "pci", busno)) == NULL) { device_printf(device_get_parent(dev), "couldn't attach pci bus\n"); return_VALUE(ENXIO); @@ -165,8 +168,10 @@ /* * Now go scan the bus. */ + device_printf(dev, "force attaching PCI link devices found in _PRT\n"); prt_walk_table(prt, prt_attach_devices, dev); + device_printf(dev, "attaching the PCI child bus device\n"); return_VALUE (bus_generic_attach(dev)); } Index: acpica/acpi_pcib_pci.c =================================================================== RCS file: /usr/cvs/src/sys/dev/acpica/acpi_pcib_pci.c,v retrieving revision 1.17 diff -u -r1.17 acpi_pcib_pci.c --- acpica/acpi_pcib_pci.c 2 May 2007 17:50:35 -0000 1.17 +++ acpica/acpi_pcib_pci.c 25 Mar 2008 19:13:06 -0000 @@ -134,7 +134,9 @@ ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); pcib_attach_common(dev); + device_printf(dev, "fetching softc pointer\n"); sc = device_get_softc(dev); + device_printf(dev, "fetching ACPI handle\n"); sc->ap_handle = acpi_get_handle(dev); return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_pcibsc.secbus)); } --Boundary-00=_e/U6HQsF9cJZohu-- From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 26 08:52:29 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9DC451065674 for ; Wed, 26 Mar 2008 08:52:29 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from minas.ics.muni.cz (minas.ics.muni.cz [147.251.4.40]) by mx1.freebsd.org (Postfix) with ESMTP id 11B838FC24 for ; Wed, 26 Mar 2008 08:52:28 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from KLOBOUCEK (kloboucek.ics.muni.cz [147.251.3.38]) (authenticated user=hopet@ICS.MUNI.CZ bits=0) by minas.ics.muni.cz (8.13.8/8.13.8/SuSE Linux 0.8) with ESMTP id m2Q8p0DD000678 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Wed, 26 Mar 2008 09:51:01 +0100 From: "Petr Holub" To: "'Sam Leffler'" References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> <47E15497.7060900@errno.com> In-Reply-To: <47E15497.7060900@errno.com> Date: Wed, 26 Mar 2008 09:50:56 +0100 Message-ID: <000f01c88f1e$84be1620$8e3a4260$@muni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AciJ8EAPbAadUUEkQKOzWBrx3jSIMgFLVj2g Content-Language: cs X-Muni-Spam-TestIP: 147.251.3.38 X-Muni-Envelope-From: hopet@ics.muni.cz X-Muni-Virus-Test: Clean X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (minas.ics.muni.cz [147.251.4.35]); Wed, 26 Mar 2008 09:51:01 +0100 (CET) Cc: imp@freebsd.org, freebsd-hardware@freebsd.org Subject: RE: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Mar 2008 08:52:29 -0000 Sam, I did a test on T61p with FreeSBIE 2.0.1 (i.e. FreeBSD 6.2-RELEASE) and when plugged in, the driver return the same HAL 13 problem as with 7.0-RELEASE. Given the fact that the same card works on 6.2-RELEASE on T41p laptop, my conclusion is there's something broken with the PCCARD slot rather than the card. Can that be because it's dual PCMCIA/ExpressCard slot? Any hints for further debugging of the problem? TIA, Petr From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 26 10:55:11 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 00EDB10656BF; Wed, 26 Mar 2008 10:55:11 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from minas.ics.muni.cz (minas.ics.muni.cz [147.251.4.40]) by mx1.freebsd.org (Postfix) with ESMTP id 6B1638FC12; Wed, 26 Mar 2008 10:55:10 +0000 (UTC) (envelope-from hopet@ics.muni.cz) Received: from KLOBOUCEK (kloboucek.ics.muni.cz [147.251.3.38]) (authenticated user=hopet@ICS.MUNI.CZ bits=0) by minas.ics.muni.cz (8.13.8/8.13.8/SuSE Linux 0.8) with ESMTP id m2QArfig025452 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Wed, 26 Mar 2008 11:53:41 +0100 From: "Petr Holub" To: "'Sam Leffler'" References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> <47E15497.7060900@errno.com> In-Reply-To: Date: Wed, 26 Mar 2008 11:53:36 +0100 Message-ID: <001101c88f2f$a98b6960$fca23c20$@muni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AciJ8EAPbAadUUEkQKOzWBrx3jSIMgFLVj2gAAR1UiA= Content-Language: cs X-Muni-Spam-TestIP: 147.251.3.38 X-Muni-Envelope-From: hopet@ics.muni.cz X-Muni-Virus-Test: Clean X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-3.0 (minas.ics.muni.cz [147.251.4.35]); Wed, 26 Mar 2008 11:53:44 +0100 (CET) Cc: imp@freebsd.org, freebsd-hardware@freebsd.org Subject: RE: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Mar 2008 10:55:11 -0000 > broken with the PCCARD slot rather than the card. Can that be > because it's dual PCMCIA/ExpressCard slot? Any hints for further > debugging of the problem? I've just tried the following, if it is of any help: [root@kloboucek ~]# sysctl -a | fgrep -i cardbus hw.cardbus.cis_debug: 0 hw.cardbus.debug: 0 dev.cbb.0.%desc: RF5C476 PCI-CardBus Bridge dev.cardbus.%parent: pci dev.cardbus.0.%desc: CardBus bus dev.cardbus.0.%driver: cardbus dev.cardbus.0.%parent: cbb0 [root@kloboucek ~]# sysctl -w hw.cardbus.cis_debug=1 hw.cardbus.cis_debug: 0 -> 1 [root@kloboucek ~]# sysctl -w hw.cardbus.debug=1 hw.cardbus.debug: 0 -> 1 [root@kloboucek ~]# cardbus0: CIS pointer is 0x5001 cardbus0: CIS in BAR 0x10 cardbus0: Expecting link target, got 0x0 cardbus0: Warning: Bogus CIS ignored ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on cardbus0 ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 Petr From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 26 16:29:33 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 275AC106566B for ; Wed, 26 Mar 2008 16:29:33 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from speedfactory.net (mail.speedfactory.net [66.23.216.219]) by mx1.freebsd.org (Postfix) with ESMTP id 9F5358FC12 for ; Wed, 26 Mar 2008 16:29:32 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from server.baldwin.cx (unverified [66.23.211.162]) by speedfactory.net (SurgeMail 3.8s) with ESMTP id 236812042-1834499 for multiple; Wed, 26 Mar 2008 12:28:06 -0400 Received: from localhost.corp.yahoo.com (john@localhost [127.0.0.1]) (authenticated bits=0) by server.baldwin.cx (8.14.2/8.14.2) with ESMTP id m2QGTHta089951; Wed, 26 Mar 2008 12:29:23 -0400 (EDT) (envelope-from jhb@freebsd.org) From: John Baldwin To: freebsd-hardware@freebsd.org Date: Wed, 26 Mar 2008 11:04:48 -0400 User-Agent: KMail/1.9.7 References: <874E95E3-7B65-4704-BA5D-3086CC055111@via.net> <1156962747.10838.15.camel@bigapple.omnis.ch> <1158066476.4695.22.camel@oli2.insign.local> In-Reply-To: <1158066476.4695.22.camel@oli2.insign.local> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200803261104.48408.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (server.baldwin.cx [127.0.0.1]); Wed, 26 Mar 2008 12:29:23 -0400 (EDT) X-Virus-Scanned: ClamAV 0.91.2/6396/Wed Mar 26 07:29:12 2008 on server.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-4.4 required=4.2 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.3 X-Spam-Checker-Version: SpamAssassin 3.1.3 (2006-06-01) on server.baldwin.cx Cc: Olivier Mueller Subject: Re: Dell 1950 won't cleanly reboot X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Mar 2008 16:29:33 -0000 On Tuesday 12 September 2006 09:07:56 am Olivier Mueller wrote: > On Wed, 2006-08-30 at 20:32 +0200, Olivier Mueller wrote: > > On Wed, 2006-08-09 at 22:04 -0400, John Baldwin wrote: > > > On Thursday 03 August 2006 04:04, Olivier Mueller wrote: > > > > On Wed, 2006-08-02 at 17:43 -0700, joe mcguckin wrote: > > > > > shutdown -r hangs most of the time. > > > > > 1) Does this only happen if SMP is enabled? > > > > no, I tried with an non-SMP kernel today, and it rebooted > > correctely for my 4 tests. > > > > > 2) If so, can you try http://www.FreeBSD.org/~jhb/patches/shutdown.patch > > > > first it looked ok (the 2 first reboots went fine), but then the > > next 3 failed. > > Any suggestion what I should try next? (beside of switching back to > linux... :>) Should I try 7-CURRENT? I know it's not (yet) under > http://www.freebsd.org/platforms/amd64/motherboards.html . > > The server is now 2-3 months old, I guess I am not the only one using > this hardware under freebsd now? > > regards, > Olivier, ready to test any patch :) Are you still seeing hangs on reboot? I fixed another shutdown hang in the ehci(4) that is a workaround for busted BIOSen that is in RELENG_6 and RELENG_7. -- John Baldwin From owner-freebsd-hardware@FreeBSD.ORG Wed Mar 26 23:53:38 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D1CA11065672 for ; Wed, 26 Mar 2008 23:53:38 +0000 (UTC) (envelope-from scott.marshall@mail.com) Received: from fallback.us4.outblaze.com (fallback.us4.outblaze.com [205.158.62.120]) by mx1.freebsd.org (Postfix) with ESMTP id B99918FC24 for ; Wed, 26 Mar 2008 23:53:38 +0000 (UTC) (envelope-from scott.marshall@mail.com) Received: from webmail-outgoing.us4.outblaze.com (webmail-outgoing.us4.outblaze.com [205.158.62.67]) by fallback.us4.outblaze.com (Postfix) with ESMTP id 0F3C21C004D4 for ; Wed, 26 Mar 2008 23:09:57 +0000 (GMT) Received: from 180.9.168.192.in-addr.arpa (180.9.168.192.in-addr.arpa [192.168.9.180]) by webmail-outgoing.us4.outblaze.com (Postfix) with QMQP id 6650618001A9 for ; Wed, 26 Mar 2008 23:09:56 +0000 (GMT) X-OB-Received: from unknown (205.158.62.123) by wfilter.us4.outblaze.com; 26 Mar 2008 23:09:56 -0000 Received: by ws1-3a.us4.outblaze.com (Postfix, from userid 1001) id 5077A49B6BD; Wed, 26 Mar 2008 23:09:56 +0000 (GMT) Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="iso-8859-15" MIME-Version: 1.0 From: scott.marshall@mail.com To: freebsd-hardware@freebsd.org Date: Wed, 26 Mar 2008 23:09:56 +0000 Received: from [82.15.251.120] by ws1-3a.us4.outblaze.com with http for scott.marshall@mail.com; Wed, 26 Mar 2008 23:09:56 +0000 X-Originating-Ip: 82.15.251.120 X-Originating-Server: ws1-3a.us4.outblaze.com Message-Id: <20080326230956.5077A49B6BD@ws1-3a.us4.outblaze.com> Subject: Currently available internal PCI hardware modems? X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Mar 2008 23:53:38 -0000 As copiously written elsewhere, FreeBSD works best with hardware modems, no= t WinModems / LinModems. I need to fit an internal PCI fax/modem (for various reasons an external mo= dem is not an option, so sorry if you were about to suggest that). However, I'm having difficulty identifying which internal modems are genuin= e hardware modems.=A0 Internet searches and manufacturers' specifications a= re inconclusive (PCI cards that are called "hardware" modems turn out not t= o be, or are no longer available, etc).=A0 Contacting manufacturers' tech s= upport either yields no reply, or again inconclusive responses. So, my question please is: can anyone provide details (eg manufacturer, mod= el number, retailer) of any genuine hardware PCI fax/modems, that are curre= ntly available (March 2008), and preferably available in UK.=A0 If you have= actually used one with FreeBSD and can confirm that it works, that would b= e even better!=A0 (NB the 'fax' part of fax/modem is important, as that's a= ctually the main reason for needing it!) (Or if there is a webpage somewhere with this info already, a link to it wo= uld be great! As above, my googling (and searching of this mailing list) h= asn't yielded anything definitive) [To clarify: by "hardware" PCI modem, I mean a PCI card that has all modem = control functions on the card, and requires no software control at the mode= m level from the computer.=A0 To the computer and o/s, the card just looks = like a 'tty' serial port, exactly the same as a normal serial port to which= an external modem would be connected (except in this case the modem is emb= edded in the PCI card).=A0 So one just runs modem/fax/whatever applications= (or even a raw terminal emulator!) that send 'AT' commands etc to this por= t]. Many thanks for any help, Scott From owner-freebsd-hardware@FreeBSD.ORG Thu Mar 27 01:31:06 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AFA7B1065671 for ; Thu, 27 Mar 2008 01:31:06 +0000 (UTC) (envelope-from mike@sentex.net) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [64.7.153.18]) by mx1.freebsd.org (Postfix) with ESMTP id 773728FC1B for ; Thu, 27 Mar 2008 01:31:06 +0000 (UTC) (envelope-from mike@sentex.net) Received: from Mobile2.sentex.ca (cage.simianscience.com [64.7.134.1]) by smarthost1.sentex.ca (8.14.2/8.14.2) with SMTP id m2R0vh52042749; Wed, 26 Mar 2008 20:57:43 -0400 (EDT) (envelope-from mike@sentex.net) From: mike@sentex.net To: scott.marshall@mail.com Date: Wed, 26 Mar 2008 20:58:15 -0400 Message-ID: References: <20080326230956.5077A49B6BD@ws1-3a.us4.outblaze.com> In-Reply-To: <20080326230956.5077A49B6BD@ws1-3a.us4.outblaze.com> X-Mailer: Forte Agent 4.2/32.1118 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Cc: freebsd-hardware@freebsd.org Subject: Re: Currently available internal PCI hardware modems? X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Mar 2008 01:31:06 -0000 On Wed, 26 Mar 2008 23:09:56 +0000, in sentex.lists.freebsd.hardware you wrote: >As copiously written elsewhere, FreeBSD works best with hardware modems,= not WinModems / LinModems. Hi, we use a USR 5610C=20 uc0@pci0:8:0: class=3D0x070002 card=3D0x00d312b9 chip=3D0x100812b9 = rev=3D0x01 hdr=3D0x00 vendor =3D '3COM Corp, Modem Division (Formerly US Robotics)' device =3D 'TL16CFM700PGE / 980C / 42A30KW PCI Serial Controller (for modem)d' class =3D simple comms puc0: port 0xe400-0xe407 irq 12 at device 8.0 on pci0 sio4: on puc0 Works well on RELENG_6 and RELENG_7. One small patch we run with is below --- sio_pci.c Wed Mar 26 20:53:47 2008 +++ sio_pci.c.new Wed Mar 26 20:54:05 2008 @@ -68,7 +68,6 @@ }; =20 static struct pci_ids pci_ids[] =3D { - { 0x100812b9, "3COM PCI FaxModem", 0x10 }, { 0x2000131f, "CyberSerial (1-port) 16550", 0x10 }, { 0x01101407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, { 0x01111407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 }, ---Mike From owner-freebsd-hardware@FreeBSD.ORG Thu Mar 27 15:54:47 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A8AB0106575B for ; Thu, 27 Mar 2008 15:54:47 +0000 (UTC) (envelope-from sam@errno.com) Received: from ebb.errno.com (ebb.errno.com [69.12.149.25]) by mx1.freebsd.org (Postfix) with ESMTP id 399398FC25 for ; Thu, 27 Mar 2008 15:54:47 +0000 (UTC) (envelope-from sam@errno.com) Received: from trouble.errno.com (trouble.errno.com [10.0.0.248]) (authenticated bits=0) by ebb.errno.com (8.13.6/8.12.6) with ESMTP id m2RFsjd8068507 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 27 Mar 2008 08:54:45 -0700 (PDT) (envelope-from sam@errno.com) Message-ID: <47EBC345.8010600@errno.com> Date: Thu, 27 Mar 2008 08:54:45 -0700 From: Sam Leffler User-Agent: Thunderbird 2.0.0.9 (X11/20071125) MIME-Version: 1.0 To: Petr Holub References: <003201c87aba$1ecdd210$5c697630$@muni.cz> <47C86BF5.8010306@errno.com> <018401c8899e$206076d0$61216470$@muni.cz> <47E15497.7060900@errno.com> <001101c88f2f$a98b6960$fca23c20$@muni.cz> In-Reply-To: <001101c88f2f$a98b6960$fca23c20$@muni.cz> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-DCC-Misty-Metrics: ebb.errno.com; whitelist Cc: imp@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Mar 2008 15:54:47 -0000 Petr Holub wrote: >> broken with the PCCARD slot rather than the card. Can that be >> because it's dual PCMCIA/ExpressCard slot? Any hints for further >> debugging of the problem? >> > > I've just tried the following, if it is of any help: > > [root@kloboucek ~]# sysctl -a | fgrep -i cardbus > hw.cardbus.cis_debug: 0 > hw.cardbus.debug: 0 > dev.cbb.0.%desc: RF5C476 PCI-CardBus Bridge > dev.cardbus.%parent: pci > dev.cardbus.0.%desc: CardBus bus > dev.cardbus.0.%driver: cardbus > dev.cardbus.0.%parent: cbb0 > [root@kloboucek ~]# sysctl -w hw.cardbus.cis_debug=1 > hw.cardbus.cis_debug: 0 -> 1 > [root@kloboucek ~]# sysctl -w hw.cardbus.debug=1 > hw.cardbus.debug: 0 -> 1 > [root@kloboucek ~]# > cardbus0: CIS pointer is 0x5001 > cardbus0: CIS in BAR 0x10 > cardbus0: Expecting link target, got 0x0 > cardbus0: Warning: Bogus CIS ignored > ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on > cardbus0 > ath0: [ITHREAD] > ath0: unable to attach hardware; HAL status 13 > device_attach: ath0 attach returned 6 > I believe this is a cardbus issue. As I've said before I have at least one bridge+card combo that doesn't work in HEAD because of an apparent regression in the cardbus code. I'm not familiar enough w/ the cardbus code to suggest where to dig but if you boot another system on the same hard and the card is properly identified then you can sift register settings for a clue. Sam From owner-freebsd-hardware@FreeBSD.ORG Thu Mar 27 19:30:19 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7225F106566B for ; Thu, 27 Mar 2008 19:30:19 +0000 (UTC) (envelope-from jin@george.lbl.gov) Received: from smtp124.sbc.mail.sp1.yahoo.com (smtp124.sbc.mail.sp1.yahoo.com [69.147.64.97]) by mx1.freebsd.org (Postfix) with SMTP id 5C5F48FC13 for ; Thu, 27 Mar 2008 19:30:19 +0000 (UTC) (envelope-from jin@george.lbl.gov) Received: (qmail 7295 invoked from network); 27 Mar 2008 18:07:45 -0000 Received: from unknown (HELO ?192.168.2.17?) (jinmtb@sbcglobal.net@75.37.3.8 with plain) by smtp124.sbc.mail.sp1.yahoo.com with SMTP; 27 Mar 2008 18:07:45 -0000 X-YMail-OSG: a.eGxekVM1nfRka2LpFJmeyLwgzUOTebxjXrSlEZNfrtnFaAyMRRBM66QIZENc8czLJlmUqXkw-- X-Yahoo-Newman-Property: ymail-3 Message-ID: <47EBE270.1040603@george.lbl.gov> Date: Thu, 27 Mar 2008 11:07:44 -0700 From: "Jin Guojun [VFFS]" User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.13) Gecko/20071201 X-Accept-Language: en, zh, zh-CN MIME-Version: 1.0 To: mike@sentex.net References: <20080326230956.5077A49B6BD@ws1-3a.us4.outblaze.com> In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Cc: scott.marshall@mail.com, freebsd-hardware@freebsd.org Subject: Re: Currently available internal PCI hardware modems? X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Mar 2008 19:30:19 -0000 I have a CTR-21 (with Agere SV92PL-T00 / SV 04395 chipset) Fax Modem, but could not get it work under 6.2 release. Does anyone know if this modem will work under 6.3 or 7.0 release? TIA, -Jin mike@sentex.net wrote: >On Wed, 26 Mar 2008 23:09:56 +0000, in sentex.lists.freebsd.hardware >you wrote: > > > >>As copiously written elsewhere, FreeBSD works best with hardware modems, not WinModems / LinModems. >> >> > >Hi, >we use a USR 5610C > >uc0@pci0:8:0: class=0x070002 card=0x00d312b9 chip=0x100812b9 rev=0x01 >hdr=0x00 > vendor = '3COM Corp, Modem Division (Formerly US Robotics)' > device = 'TL16CFM700PGE / 980C / 42A30KW PCI Serial Controller >(for modem)d' > class = simple comms > > >puc0: port 0xe400-0xe407 >irq 12 at device 8.0 on pci0 >sio4: on puc0 > >Works well on RELENG_6 and RELENG_7. One small patch we run with is >below > >--- sio_pci.c Wed Mar 26 20:53:47 2008 >+++ sio_pci.c.new Wed Mar 26 20:54:05 2008 >@@ -68,7 +68,6 @@ > }; > > static struct pci_ids pci_ids[] = { >- { 0x100812b9, "3COM PCI FaxModem", 0x10 }, > { 0x2000131f, "CyberSerial (1-port) 16550", 0x10 }, > { 0x01101407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 >}, > { 0x01111407, "Koutech IOFLEX-2S PCI Dual Port Serial", 0x10 >}, > > > From owner-freebsd-hardware@FreeBSD.ORG Fri Mar 28 11:27:59 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E1326106566B for ; Fri, 28 Mar 2008 11:27:59 +0000 (UTC) (envelope-from gandalf@shopzeus.com) Received: from viefep14-int.chello.at (viefep18-int.chello.at [213.46.255.22]) by mx1.freebsd.org (Postfix) with ESMTP id 21C0F8FC12 for ; Fri, 28 Mar 2008 11:27:58 +0000 (UTC) (envelope-from gandalf@shopzeus.com) Received: from [192.168.1.103] (really [80.99.119.182]) by viefep19-int.chello.at (InterMail vM.7.08.02.02 201-2186-121-104-20070414) with ESMTP id <20080328111208.SVOO5883.viefep19-int.chello.at@[192.168.1.103]> for ; Fri, 28 Mar 2008 12:12:08 +0100 Message-ID: <47ECD287.1070305@shopzeus.com> Date: Fri, 28 Mar 2008 12:12:07 +0100 From: Laszlo Nagy User-Agent: Thunderbird 2.0.0.12 (X11/20080227) MIME-Version: 1.0 To: freebsd-hardware@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Compat question: MSI P35, Q6600 + RocketRAID (?) X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Mar 2008 11:28:00 -0000 Hello, I'm building a small server computer. I selected the following components: MSI P35 Platinum motherboard (should be rev 1.1) Core 2 Quad Q6600 processor 4 x 2048 DDR2 memory The operating system will be FreeBSD 7.0 amd64. Questions: - Is the integrated gigabit LAN supported in FreeBSD 7.0? - Is that motherboard works with FBSD 7.0, or should I choose a different one (for about the same price). I also need to build a RAID 6 array. I would like to use the integrated SATA controller for the base system (gmirror with 2 disks on ICH9) and a PCI-E based RAID controller with 13 disks (12 in RAID 6 plus a hot spare drive). I'm not sure which RAID controller I should use. The controller must support these: - RAID 6 - Hot swap - Hot spare I found a controller that can do this: RocketRAID 2340. Its documentation says that it support FreeBSD. Can somebody confirm that it works with FreeBSD 7.0? Is there a better (faster/better supported/more stable) RAID card that I can use (for about the same price). Also I do not know how to setup a RAID 6 array: from BIOS or Freebsd? but that is not a hw question. ** Thanks, Laszlo From owner-freebsd-hardware@FreeBSD.ORG Fri Mar 28 20:02:03 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 70067106564A for ; Fri, 28 Mar 2008 20:02:03 +0000 (UTC) (envelope-from cam@eleventhhourfx.com) Received: from neo-zeon.de (dsl-63-249-90-167.cruzio.com [63.249.90.167]) by mx1.freebsd.org (Postfix) with ESMTP id 3DC458FC19 for ; Fri, 28 Mar 2008 20:02:02 +0000 (UTC) (envelope-from cam@eleventhhourfx.com) Received: from amuro.lan.nerv ([10.0.0.2] ident=hiryu) by neo-zeon.de with esmtp (Exim 4.63) (envelope-from ) id 1JfKlz-0005yb-FT; Fri, 28 Mar 2008 13:02:02 -0700 From: Cameron To: freebsd-hardware@freebsd.org Date: Fri, 28 Mar 2008 12:59:33 -0700 User-Agent: KMail/1.9.7 References: <47ECD287.1070305@shopzeus.com> In-Reply-To: <47ECD287.1070305@shopzeus.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200803281259.33728.cam@eleventhhourfx.com> X-SA-Exim-Connect-IP: 10.0.0.2 X-SA-Exim-Mail-From: cam@eleventhhourfx.com X-Spam-Checker-Version: SpamAssassin 3.1.7-deb (2006-10-05) on panzer.lan.nerv X-Spam-Level: X-Spam-Status: No, score=-4.4 required=2.0 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.7-deb X-SA-Exim-Version: 4.2.1 (built Tue, 09 Jan 2007 17:23:22 +0000) X-SA-Exim-Scanned: Yes (on neo-zeon.de) Cc: Laszlo Nagy Subject: Re: Compat question: MSI P35, Q6600 + RocketRAID (?) X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 28 Mar 2008 20:02:03 -0000 I have an Asus p35 mobo and FreeBSD works just fine with the gigabit nic. I *think* it uses the standard p35 onboard nic. Verfiy the MSI board does as well. I just replaced an MSI board myself because it was unable to boot from PCI devices (and I have an LSI Logic PCI RAID controller). You might verify that this MSI board doesn't have any problems like this. You might also consider getting the same board as I (or one of its closely related cousins if my board doesn't have quite the feature set that you're looking for) since you'll know it will be compatible: Asus P5K-E WIFI I think the wifi might work, but I haven't verified it. I don't boot into FreeBSD often since there's no decent video card drivers for it (the xorg nvidia drivers won't even let me do 1600x1200!!) so I can't check if the wifi works at the moment. FreeBSD works with both the onboard SATA (ICH9) and the onboard PATA. Linux seems to not work with the ICH9 at this point (in case anyone on this list cares) but works with the onboard PATA just fine. Hope that helps. -Cameron On Friday 28 March 2008 4:12:07 am Laszlo Nagy wrote: > Hello, I'm building a small server computer. > > I selected the following components: > > MSI P35 Platinum motherboard (should be rev 1.1) > Core 2 Quad Q6600 processor > 4 x 2048 DDR2 memory > > The operating system will be FreeBSD 7.0 amd64. > > Questions: > > - Is the integrated gigabit LAN supported in FreeBSD 7.0? > - Is that motherboard works with FBSD 7.0, or should I choose a > different one (for about the same price). > > I also need to build a RAID 6 array. I would like to use the integrated > SATA controller for the base system (gmirror with 2 disks on ICH9) and a > PCI-E based RAID controller with 13 disks (12 in RAID 6 plus a hot spare > drive). I'm not sure which RAID controller I should use. The controller > must support these: > > - RAID 6 > - Hot swap > - Hot spare > > I found a controller that can do this: RocketRAID 2340. Its > documentation says that it support FreeBSD. Can somebody confirm that it > works with FreeBSD 7.0? Is there a better (faster/better supported/more > stable) RAID card that I can use (for about the same price). > > Also I do not know how to setup a RAID 6 array: from BIOS or Freebsd? > but that is not a hw question. ** > > Thanks, > > Laszlo > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org" From owner-freebsd-hardware@FreeBSD.ORG Sat Mar 29 06:19:55 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 796E6106566C for ; Sat, 29 Mar 2008 06:19:55 +0000 (UTC) (envelope-from imp@bsdimp.com) Received: from harmony.bsdimp.com (bsdimp.com [199.45.160.85]) by mx1.freebsd.org (Postfix) with ESMTP id 3C6398FC13 for ; Sat, 29 Mar 2008 06:19:55 +0000 (UTC) (envelope-from imp@bsdimp.com) Received: from localhost (localhost [127.0.0.1]) by harmony.bsdimp.com (8.14.2/8.14.1) with ESMTP id m2T6J3uE094951; Sat, 29 Mar 2008 00:19:04 -0600 (MDT) (envelope-from imp@bsdimp.com) Date: Sat, 29 Mar 2008 00:19:45 -0600 (MDT) Message-Id: <20080329.001945.-432837066.imp@bsdimp.com> To: sam@errno.com From: "M. Warner Losh" In-Reply-To: <47EBC345.8010600@errno.com> References: <47E15497.7060900@errno.com> <001101c88f2f$a98b6960$fca23c20$@muni.cz> <47EBC345.8010600@errno.com> X-Mailer: Mew version 5.2 on Emacs 21.3 / Mule 5.0 (AKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: hopet@ics.muni.cz, freebsd-hardware@freebsd.org Subject: Re: support for Proxim Silver wifi card X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Mar 2008 06:19:55 -0000 In message: <47EBC345.8010600@errno.com> Sam Leffler writes: : Petr Holub wrote: : >> broken with the PCCARD slot rather than the card. Can that be : >> because it's dual PCMCIA/ExpressCard slot? Any hints for further : >> debugging of the problem? : >> : > : > I've just tried the following, if it is of any help: : > : > [root@kloboucek ~]# sysctl -a | fgrep -i cardbus : > hw.cardbus.cis_debug: 0 : > hw.cardbus.debug: 0 : > dev.cbb.0.%desc: RF5C476 PCI-CardBus Bridge : > dev.cardbus.%parent: pci : > dev.cardbus.0.%desc: CardBus bus : > dev.cardbus.0.%driver: cardbus : > dev.cardbus.0.%parent: cbb0 : > [root@kloboucek ~]# sysctl -w hw.cardbus.cis_debug=1 : > hw.cardbus.cis_debug: 0 -> 1 : > [root@kloboucek ~]# sysctl -w hw.cardbus.debug=1 : > hw.cardbus.debug: 0 -> 1 : > [root@kloboucek ~]# : > cardbus0: CIS pointer is 0x5001 : > cardbus0: CIS in BAR 0x10 : > cardbus0: Expecting link target, got 0x0 : > cardbus0: Warning: Bogus CIS ignored : > ath0: mem 0xbfeb0000-0xbfebffff irq 16 at device 0.0 on : > cardbus0 : > ath0: [ITHREAD] : > ath0: unable to attach hardware; HAL status 13 : > device_attach: ath0 attach returned 6 : > : : I believe this is a cardbus issue. As I've said before I have at least : one bridge+card combo that doesn't work in HEAD because of an apparent : regression in the cardbus code. I'm not familiar enough w/ the cardbus : code to suggest where to dig but if you boot another system on the same : hard and the card is properly identified then you can sift register : settings for a clue. What does sysctl hw.cbb show? The card clearly is powering up, but we're not finding the CIS for some reason. I don't think that's fatal, and the fact that we attach the ath card means we have aren't hitting the bus issue. The fact that we see it means we're not hitting the power issue. Warner