Date: Mon, 8 Sep 2008 02:22:26 GMT From: FreeBSD bugmaster <bugmaster@FreeBSD.org> To: freebsd-scsi@FreeBSD.org Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org Message-ID: <200809080222.m882MQuH006806@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.
S Tracker Resp. Description
--------------------------------------------------------------------------------
o kern/126866 scsi [isp] [panic] kernel panic on card initialization
o kern/124667 scsi [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi
o kern/123674 scsi [ahc] ahc driver dumping
o kern/123666 scsi [aac] attach fails with Adaptec SAS RAID 3805 controll
o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc
o kern/120487 scsi [sg] scsi_sg incompatible with scanners
o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s
o kern/119668 scsi [cam] [patch] certain errors are too verbose comparing
o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs
o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks
o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression]
o kern/94838 scsi Kernel panic while mounting SD card with lock switch o
o kern/92798 scsi [ahc] SCSI problem with timeouts
o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device
o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system
o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3
s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb
o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load
o kern/60598 scsi wire down of scsi devices conflicts with config
s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di
o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than
o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND
o kern/40895 scsi wierd kernel / device driver bug
o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m
o kern/38828 scsi [dpt] [request] DPT PM2012B/90 doesn't work
o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce
26 problems total.
Bugs can be in one of several states:
o - open
A problem report has been submitted, no sanity checking performed.
a - analyzed
The problem is understood and a solution is being sought.
f - feedback
Further work requires additional information from the
originator or the community - possibly confirmation of
the effectiveness of a proposed solution.
p - patched
A patch has been committed, but some issues (MFC and / or
confirmation from originator) are still open.
r - repocopy
The resolution of the problem report is dependent on
a repocopy operation within the CVS repository which
is awaiting completion.
s - suspended
The problem is not being worked on, due to lack of information
or resources. This is a prime candidate
for somebody who is looking for a project to do.
If the problem cannot be solved at all,
it will be closed, rather than suspended.
c - closed
A problem report is closed when any changes have been integrated,
documented, and tested -- or when fixing the problem is abandoned.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200809080222.m882MQuH006806>