From owner-freebsd-acpi@FreeBSD.ORG Mon Aug 24 11:06:48 2009 Return-Path: Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E6BF0106568D for ; Mon, 24 Aug 2009 11:06:48 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id D54518FC08 for ; Mon, 24 Aug 2009 11:06:48 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id n7OB6mkG048444 for ; Mon, 24 Aug 2009 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id n7OB6mtG048440 for freebsd-acpi@FreeBSD.org; Mon, 24 Aug 2009 11:06:48 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 24 Aug 2009 11:06:48 GMT Message-Id: <200908241106.n7OB6mtG048440@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-acpi@FreeBSD.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 24 Aug 2009 11:06:49 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o bin/137053 acpi [hang] FreeBSD 8.0 BETA2Compaq Mini 700 locks on boot o kern/137042 acpi [acpi] hp laptop's lcd not wakes up after suspend to r o kern/136808 acpi [acpi] panic when switching to s3 o i386/136008 acpi [acpi] Dell Vostro 1310 will not shutdown (Requires us o bin/135349 acpi [patch] teach acpidump(8) to disassemble arbitrary mem o kern/135070 acpi [acpi] [patch] BIOS resource allocation and FreeBSD AC o kern/132602 acpi [acpi] ACPI Problem with Intel SS4200: System does not o kern/130683 acpi [ACPI] shutdown hangs after syncing disks - ACPI race? o i386/129953 acpi [acpi] ACPI timeout (CDROM) with Shuttle X27D o kern/129618 acpi [acpi] Problem with ACPI on HP Pavilion DV2899 laptop o kern/129563 acpi [acpi] sleep broken on IBM/Lenovo T61 in amd64 mode f kern/128639 acpi [patch] [acpi_asus] acpi for ASUS A6F,A3E,A3F,A3N not f kern/128634 acpi [patch] fix acpi_asus(4) in asus a6f laptop o kern/127581 acpi [patch] [acpi_sony] Add support for more Sony features o kern/124744 acpi [acpi] [patch] incorrect _BST result validation for To o kern/124412 acpi [acpi] power off error on Toshiba M40 laptop o kern/123039 acpi [acpi] ACPI AML_BUFFER_LIMIT errors during boot o kern/121504 acpi [patch] Correctly set hw.acpi.osname on certain machin f kern/121454 acpi [pst] Promise SuperTrak SX6000 does not load during bo o amd64/121439 acpi [boot] Installation of FreeBSD 7.0 fails: ACPI problem o kern/121102 acpi [acpi_fujitsu] [patch] update acpi_fujitsu for the P80 o kern/120515 acpi [acpi] [patch] acpi_alloc_wakeup_handler: can't alloc o kern/119356 acpi [acpi]: i386 ACPI wakeup not work due resource exhaust o kern/119200 acpi [acpi] Lid close switch suspends CPU for 1 second on H o kern/118973 acpi [acpi]: Kernel panic with acpi boot o kern/117605 acpi [acpi] [request] add debug.cpufreq.highest o kern/116939 acpi [acpi] PCI-to-PCI misconfigured for bus three and can o i386/114562 acpi [acpi] cardbus is dead after s3 on Thinkpad T43 with a o kern/114165 acpi [acpi] Dell C810 - ACPI problem s kern/112544 acpi [acpi] [patch] Add High Precision Event Timer Driver f o kern/108954 acpi [acpi] 'sleep(1)' sleeps >1 seconds when speedstep (Cx o kern/108695 acpi [acpi]: Fatal trap 9: general protection fault when in o kern/108488 acpi [acpi] ACPI-1304: *** Error: Method execution failed o kern/108017 acpi [acpi]: Acer Aspire 5600 o kern/106924 acpi [acpi] ACPI resume returns g_vfs_done() errors and ker o kern/105537 acpi [acpi] problems in acpi on HP Compaq nc6320 o kern/104625 acpi ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show ther o kern/102252 acpi acpi thermal does not work on Abit AW8D (intel 975) o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI s i386/91748 acpi acpi problem on Acer TravelMare 4652LMi (nvidia panic, s kern/91038 acpi [panic] [ata] [acpi] 6.0-RELEASE on Fujitsu Siemens Am s kern/90243 acpi Laptop fan doesn't turn off (ACPI enabled) (Packard Be o i386/83018 acpi [install] Installer will not boot on Asus P4S8X BIOS 1 f kern/81000 acpi [apic] Via 8235 sound card worked great with FreeBSD 5 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o kern/76950 acpi ACPI wrongly blacklisted on Micron ClientPro 766Xi sys s kern/73823 acpi [request] acpi / power-on by timer support o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/69750 acpi Boot without ACPI failed on ASUS L5 o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop 52 problems total. From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 16:54:42 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 31B4D106568B; Tue, 25 Aug 2009 16:54:42 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 08C348FC21; Tue, 25 Aug 2009 16:54:40 +0000 (UTC) Received: from odyssey.starpoint.kiev.ua (alpha-e.starpoint.kiev.ua [212.40.38.101]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id TAA07103; Tue, 25 Aug 2009 19:35:57 +0300 (EEST) (envelope-from avg@freebsd.org) Message-ID: <4A9412ED.6080309@freebsd.org> Date: Tue, 25 Aug 2009 19:35:57 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090724) MIME-Version: 1.0 To: freebsd-hardware@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hackers@freebsd.org X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: Subject: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 16:54:42 -0000 I have become to own Gigabyte GA-MA780G-UD3H motherboard: http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=3004&ProductName=GA-MA780G-UD3H It is based on AMD 780G + SB700. BTW, CPU I am using is Athlon II X2 250. Sorry for the broadcast announcement, but this is my first AMD-based system in many years, so I eagerly started exploring it and hacking for it. For this reason please expect a number of questions from me as well as some reports and hopefully code related to this motherboard. I am going to post them as follow-ups to this email. Meanwhile, if you interested in any information about this motherboard - data dumps, outputs from tools, etc - please let me know, I will try my best to provide that. -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 17:49:34 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 27D18106568B; Tue, 25 Aug 2009 17:49:34 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 3B6DF8FC1A; Tue, 25 Aug 2009 17:49:32 +0000 (UTC) Received: from odyssey.starpoint.kiev.ua (alpha-e.starpoint.kiev.ua [212.40.38.101]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id UAA08587; Tue, 25 Aug 2009 20:49:31 +0300 (EEST) (envelope-from avg@freebsd.org) Message-ID: <4A94242B.7090806@freebsd.org> Date: Tue, 25 Aug 2009 20:49:31 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090724) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org, freebsd-hackers@freebsd.org References: <4A9412ED.6080309@freebsd.org> In-Reply-To: <4A9412ED.6080309@freebsd.org> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: Subject: AMD SB700 SMBus controller driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 17:49:34 -0000 According to SB700 specifications its SMBus controller is very similar to one in PIIX4. The differences that I see so far: 1. Interrupt Line/Interrupt Pin PCI configuration registers (0x3c, 0x3d) do not specify interrupt number that the controller could use: > This register specifies which interrupt pin the device issue > This module does not generate interrupt but contains the > actual interrupt controller. This register is hardcoded to 0. 2. I2CbusConfig register (0xd2) uses bit #1 to indicate whether SMI or regular interrupt is used in interrupt mode; PIIX4 uses bit 3. I couldn't get our intpm driver to work with this hardware by simply adding PCI id and tweaking 0xd2 bits meaning. I could get it to work by forcing polling mode. It appears that Linux driver for this HW always uses polling mode, and OpenBSD and NetBSD drivers would use it with this HW too. I am still trying to get interrupt mode to work. I set 0xd2 to enable regular interrupt generation (it is set to SMI after boot). SB700 specifications say at one place that SMB interrupt is connected to INTIN20 pin of IO-APIC in APIC mode. I tried setting up IRQ20 in the driver but no interrupts are generated. And there are no stray interrupts either. So I am not sure - either this HW doesn't generate normal interrupts at all, or they to a different pin, or additional setup is required, or I am doing something wrong. Anyway, I plan to produce an updated version of intpm driver with possibility of forced or auto-detected polling mode and support for PCI id of SB700 SMBus controller and its peculiarities. -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 18:00:50 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C4169106568C; Tue, 25 Aug 2009 18:00:50 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id D87288FC2B; Tue, 25 Aug 2009 18:00:49 +0000 (UTC) Received: from odyssey.starpoint.kiev.ua (alpha-e.starpoint.kiev.ua [212.40.38.101]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id VAA08763; Tue, 25 Aug 2009 21:00:48 +0300 (EEST) (envelope-from avg@freebsd.org) Message-ID: <4A9426CF.1030205@freebsd.org> Date: Tue, 25 Aug 2009 21:00:47 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090724) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org, freebsd-hackers@freebsd.org References: <4A9412ED.6080309@freebsd.org> In-Reply-To: <4A9412ED.6080309@freebsd.org> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: Subject: GA-MA780G-UD3H hardware monitoring X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 18:00:50 -0000 Does anybody know if Gigabyte provides special ACPI interfaces for HWM on their motherboards? Maybe something like ASUS does (acpi_aiboost)? Or do they access HWM chip directly? They have this EasyTune software, so they must be doing something. DSDT of GA-MA780G-UD3H doesn't even provide TZ. This motherboard has iTE IT8718 Super I/O + HWM chip. Thanks to superiotool from coreboot project I determined that base address (port actually) for HWM logical device is at 0x228 (as opposed to more typical 0x290). Slightly modified version of mbmon is even able to recognize the chip and get some data. I am not sure if the data is entirely correct, but it looks sane/reasonable. Still I would like to not only monitor temperatures, voltages and fan speeds, but even to be able to control fan speed. Any links, pointers, ideas, code would be very appreciated! -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 19:00:38 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6DCA0106568E; Tue, 25 Aug 2009 19:00:38 +0000 (UTC) (envelope-from sfourman@gmail.com) Received: from mail-yw0-f202.google.com (mail-yw0-f202.google.com [209.85.211.202]) by mx1.freebsd.org (Postfix) with ESMTP id D035D8FC1D; Tue, 25 Aug 2009 19:00:37 +0000 (UTC) Received: by ywh40 with SMTP id 40so5099146ywh.14 for ; Tue, 25 Aug 2009 12:00:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=ysJGjQkEFWG71DX0Qg1546yjxxIdGRBjLc5reyWdTrk=; b=obtPZy+hMFSaxgwzu+ImzkRWe2Ww56upihFW4eotGAJXQ8tJPc0LsL6a7qGBcupzFi AX3l6LyvhbKT3t8jAI8ErPy3zz2Qr+G5g8cfyKyN3iMmzyva+tAo66eeHvVVPa0DqJDp RNdRs1GAkC+6TaTaPHbQCpLN4+GfZTdp6HNuo= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=HQpWsL1La2OsbPLxcDN04cQhZ6VI7grUP5FqxCFU0ZltOG3gN3qfnIoWAnNYnHgsrb CXMcfhTDS3da5v8QZOGT6Hci1t3x2C2Mb1Lq4XcBMU1O5VhAYiXrbcldIzv8mWsjaolo m2UsATbSJFG9Rxpt/YNsbIJsUqHBLW/EpHJHk= MIME-Version: 1.0 Received: by 10.150.129.27 with SMTP id b27mr11225837ybd.29.1251225280343; Tue, 25 Aug 2009 11:34:40 -0700 (PDT) In-Reply-To: <4A9412ED.6080309@freebsd.org> References: <4A9412ED.6080309@freebsd.org> Date: Tue, 25 Aug 2009 13:34:40 -0500 Message-ID: <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> From: "Sam Fourman Jr." To: Andriy Gapon Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 19:00:38 -0000 > Meanwhile, if you interested in any information about this motherboard - data > dumps, outputs from tools, etc - please let me know, I will try my best to provide > that. it would be interesting to see a dmesg as a starting point. Sam Fourman Jr. From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 19:46:21 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8343B1065743; Tue, 25 Aug 2009 19:46:21 +0000 (UTC) (envelope-from thierry.herbelot@free.fr) Received: from smtpfb1-g21.free.fr (smtpfb1-g21.free.fr [212.27.42.9]) by mx1.freebsd.org (Postfix) with ESMTP id 943A88FC1A; Tue, 25 Aug 2009 19:46:17 +0000 (UTC) Received: from smtp4-g21.free.fr (smtp4-g21.free.fr [212.27.42.4]) by smtpfb1-g21.free.fr (Postfix) with ESMTP id 8294F77CB3E; Tue, 25 Aug 2009 21:28:12 +0200 (CEST) Received: from smtp4-g21.free.fr (localhost [127.0.0.1]) by smtp4-g21.free.fr (Postfix) with ESMTP id 1C5484C810F; Tue, 25 Aug 2009 21:28:03 +0200 (CEST) Received: from mail.herbelot.nom (bne75-4-82-227-159-103.fbx.proxad.net [82.227.159.103]) by smtp4-g21.free.fr (Postfix) with ESMTP id E2DB14C8182; Tue, 25 Aug 2009 21:28:00 +0200 (CEST) Received: from tulipe.herbelot.nom (tulipe.herbelot.nom [192.168.2.5]) by mail.herbelot.nom (8.14.1/8.14.1) with ESMTP id n7PJRrst009804; Tue, 25 Aug 2009 21:27:54 +0200 (CEST) From: Thierry Herbelot To: freebsd-hackers@freebsd.org Date: Tue, 25 Aug 2009 21:27:47 +0200 User-Agent: KMail/1.9.10 References: <4A9412ED.6080309@freebsd.org> <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> In-Reply-To: <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> X-Warning: Windows can lose your files X-Op-Sys: Le FriBi de la mort qui tue X-Org: TfH&Co X-MailScanner: Found to be clean MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Content-Disposition: inline Message-Id: <200908252127.48214.thierry.herbelot@free.fr> Cc: freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 19:46:21 -0000 Le Tuesday 25 August 2009, Sam Fourman Jr. a écrit : > > Meanwhile, if you interested in any information about this motherboard - > > data dumps, outputs from tools, etc - please let me know, I will try my > > best to provide that. > > it would be interesting to see a dmesg as a starting point. > here you are ;-) I have plugged a PCI sound board in the machine, but it does seem to be detected (there could be some issue with PCI bus enumeration : I also include a pciconf log) TfH > > Sam Fourman Jr. > _______________________________________________ > freebsd-hackers@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-STABLE #12: Mon Jul 6 09:37:34 CEST 2009 XXX@YYY:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (3106.64-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f TSC: P-state invariant Cores per package: 2 usable memory = 4008947712 (3823 MB) avail memory = 3836862464 (3659 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bfce0000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdfe0000-0xfdfeffff,0xfde00000-0xfdefffff irq 18 at device 5.0 on pci1 hdac0: mem 0xfdffc000-0xfdffffff irq 19 at device 5.1 on pci1 hdac0: HDA Driver Revision: 20090329_0131 hdac0: [ITHREAD] pcib2: irq 18 at device 10.0 on pci0 pci2: on pcib2 re0: port 0xde00-0xdeff mem 0xfdaff000-0xfdafffff,0xfdae0000-0xfdaeffff irq 18 at device 0.0 on pci2 re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1f:d0:56:75:23 re0: [FILTER] atapci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 6 ports detected ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] ata6: on atapci0 ata6: [ITHREAD] ata7: on atapci0 ata7: [ITHREAD] ohci0: mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 6 ports with 6 removable, self powered ohci2: mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: on ohci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 3 ports with 3 removable, self powered ohci3: mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: on ohci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 3 ports with 3 removable, self powered ehci1: mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: on ehci1 usb5: USB revision 2.0 uhub5: on usb5 uhub5: 6 ports with 6 removable, self powered pci0: at device 20.0 (no driver attached) atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 ata0: on atapci1 ata0: [ITHREAD] hdac1: mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 hdac1: HDA Driver Revision: 20090329_0131 hdac1: [ITHREAD] isab0: at device 20.3 on pci0 isa0: on isab0 pcib3: at device 20.4 on pci0 pci3: on pcib3 fwohci0: mem 0xfdcff000-0xfdcff7ff,0xfdcf8000-0xfdcfbfff irq 22 at device 14.0 on pci3 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:70:c0:59:00:00:1f:d0 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:70:c0:00:1f:d0 fwe0: Ethernet address: 02:70:c0:00:1f:d0 fwip0: on firewire0 fwip0: Firewire address: 00:70:c0:59:00:00:1f:d0 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0xb6e80000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ohci4: mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb6: OHCI version 1.0, legacy support usb6: SMM does not respond, resetting usb6: on ohci4 usb6: USB revision 1.0 uhub6: on usb6 uhub6: 2 ports with 2 removable, self powered amdtemp0: on hostb4 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 ppbus0: [ITHREAD] plip0: on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: on acpi0 powernow0: on cpu0 cpu1: on acpi0 powernow1: on cpu1 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: port may not be enabled sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad4: 238474MB at ata2-master SATA150 ZFS filesystem version 13 ZFS storage pool version 13 ad6: 238475MB at ata3-master SATA150 ad8: 238475MB at ata4-master SATA150 acd0: DVDR at ata7-master SATA150 hdac0: HDA Codec #0: ATI RS690/780 HDMI pcm0: at cad 0 nid 1 on hdac0 hdac1: HDA Codec #0: Realtek ALC885 pcm1: at cad 0 nid 1 on hdac1 pcm2: at cad 0 nid 1 on hdac1 pcm3: at cad 0 nid 1 on hdac1 GEOM_LABEL: Label for provider ad4s1a is ufsid/4895a4a721182022. GEOM_LABEL: Label for provider ad4s1d is ufsid/4895a4b3b6d4e02e. GEOM_LABEL: Label for provider ad4s1e is ufsid/4895a4b54799f68b. GEOM_LABEL: Label for provider ad4s1f is ufsid/4895a4b724bcb48f. GEOM_LABEL: Label for provider ad4s2a is ufsid/49185b60bbfa4d50. GEOM_LABEL: Label for provider ad6s1 is ext2fs//. GEOM_LABEL: Label for provider ad6s2 is ext2fs//1. GEOM_LABEL: Label for provider ad8s1a is ufsid/4895a498589c3d5f. GEOM_LABEL: Label for provider ad8s1d is ufsid/4895a48d5fd2f14b. GEOM_LABEL: Label for provider ad8s1e is ufsid/4895a48489eb6120. GEOM_LABEL: Label for provider ad8s1f is ufsid/4895a48a019d7151. GEOM_LABEL: Label for provider ad8s2a is ufsid/4729b57b020c7526. GEOM_LABEL: Label for provider ad8s2d is ufsid/4729b587458f5554. GEOM_LABEL: Label for provider ad8s2e is ufsid/4729b58af29c6330. SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s2a GEOM_LABEL: Label ufsid/49185b60bbfa4d50 removed. machine# pciconf -lv hostb0@pci0:0:0:0: class=0x060000 card=0x96001022 chip=0x96001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x96021022 chip=0x96021022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = PCI-PCI pcib2@pci0:0:10:0: class=0x060400 card=0x96001022 chip=0x96091022 rev=0x00 hdr=0x01 vendor = 'Advanced Micro Devices (AMD)' class = bridge subclass = PCI-PCI atapci0@pci0:0:17:0: class=0x010601 card=0xb0021458 chip=0x43911002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 SATA Controller [AHCI mode]' class = mass storage subclass = SATA ohci0@pci0:0:18:0: class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI0 Controller' class = serial bus subclass = USB ohci1@pci0:0:18:1: class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI1 Controller' class = serial bus subclass = USB ehci0@pci0:0:18:2: class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB EHCI Controller' class = serial bus subclass = USB ohci2@pci0:0:19:0: class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI0 Controller' class = serial bus subclass = USB ohci3@pci0:0:19:1: class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI1 Controller' class = serial bus subclass = USB ehci1@pci0:0:19:2: class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB EHCI Controller' class = serial bus subclass = USB none0@pci0:0:20:0: class=0x0c0500 card=0x43851458 chip=0x43851002 rev=0x3a hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'ATI SMBus (ATI RD600/RS600)' class = serial bus subclass = SMBus atapci1@pci0:0:20:1: class=0x01018a card=0x50021458 chip=0x439c1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'PATA 133 Controller (SB7xx)' class = mass storage subclass = ATA hdac1@pci0:0:20:2: class=0x040300 card=0xa0021458 chip=0x43831002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'IXP SB600 High Definition Audio Controller' class = multimedia subclass = HDA isab0@pci0:0:20:3: class=0x060100 card=0x43831002 chip=0x439d1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 LPC host controller' class = bridge subclass = PCI-ISA pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'IXP SB600 PCI to PCI Bridge' class = bridge subclass = PCI-PCI ohci4@pci0:0:20:5: class=0x0c0310 card=0x50041458 chip=0x43991002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'SB700 USB OHCI2 Controller' class = serial bus subclass = USB hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration' class = bridge subclass = HOST-PCI hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map' class = bridge subclass = HOST-PCI hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller' class = bridge subclass = HOST-PCI hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 vendor = 'Advanced Micro Devices (AMD)' device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control' class = bridge subclass = HOST-PCI vgapci0@pci0:1:5:0: class=0x030000 card=0xd0001458 chip=0x96101002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' device = 'Radeon HD 3200 Integrated Graphics Processor (780G)' class = display subclass = VGA hdac0@pci0:1:5:1: class=0x040300 card=0x960f1002 chip=0x960f1002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = multimedia subclass = HDA re0@pci0:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)' class = network subclass = ethernet fwohci0@pci0:3:14:0: class=0x0c0010 card=0x10001458 chip=0x8024104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller' class = serial bus subclass = FireWire From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 19:53:56 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6ACAE1065695 for ; Tue, 25 Aug 2009 19:53:56 +0000 (UTC) (envelope-from rnoland@FreeBSD.org) Received: from gizmo.2hip.net (gizmo.2hip.net [64.74.207.195]) by mx1.freebsd.org (Postfix) with ESMTP id F00A98FC2C for ; Tue, 25 Aug 2009 19:53:55 +0000 (UTC) Received: from [192.168.1.4] (adsl-154-198-91.ard.bellsouth.net [72.154.198.91]) (authenticated bits=0) by gizmo.2hip.net (8.14.3/8.14.3) with ESMTP id n7PJrowD023880 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Tue, 25 Aug 2009 15:53:51 -0400 (EDT) (envelope-from rnoland@FreeBSD.org) From: Robert Noland To: Thierry Herbelot In-Reply-To: <200908252127.48214.thierry.herbelot@free.fr> References: <4A9412ED.6080309@freebsd.org> <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> <200908252127.48214.thierry.herbelot@free.fr> Content-Type: text/plain; charset="ISO-8859-1" Organization: FreeBSD Date: Tue, 25 Aug 2009 14:53:45 -0500 Message-Id: <1251230025.45706.280.camel@balrog.2hip.net> Mime-Version: 1.0 X-Mailer: Evolution 2.26.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-1.2 required=5.0 tests=AWL,BAYES_00,RCVD_IN_PBL, RCVD_IN_SORBS_DUL, RDNS_DYNAMIC, SPF_SOFTFAIL autolearn=no version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on gizmo.2hip.net Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 19:53:56 -0000 On Tue, 2009-08-25 at 21:27 +0200, Thierry Herbelot wrote: > Le Tuesday 25 August 2009, Sam Fourman Jr. a écrit : > > > Meanwhile, if you interested in any information about this motherboard - > > > data dumps, outputs from tools, etc - please let me know, I will try my > > > best to provide that. > > > > it would be interesting to see a dmesg as a starting point. > > > here you are ;-) > > I have plugged a PCI sound board in the machine, but it does seem to be > detected (there could be some issue with PCI bus enumeration : I also include > a pciconf log) I'm curious why you would plug in a pci sound card? You already have both a standard hda codec as well as the hda codec for the hdmi port of the video. If you are discovering that it isn't working... set hw.snd.default_unit=1 which is typcially your normal analog audio port. The hdmi port on radeon chips tends to be enumerated before the normal system codecs, so people tend to think that sound isn't working. robert. > TfH > > > > Sam Fourman Jr. > > _______________________________________________ > > freebsd-hackers@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" > > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-STABLE #12: Mon Jul 6 09:37:34 CEST 2009 > XXX@YYY:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (3106.64-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 > > Features=0x178bfbff > Features2=0x2001 > AMD Features=0xea500800 > AMD Features2=0x11f > TSC: P-state invariant > Cores per package: 2 > usable memory = 4008947712 (3823 MB) > avail memory = 3836862464 (3659 MB) > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > This module (opensolaris) contains code covered by the > Common Development and Distribution License (CDDL) > see http://opensolaris.org/os/licensing/opensolaris_license/ > ioapic0: Changing APIC ID to 2 > ioapic0 irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, bfce0000 (3) failed > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > acpi_button0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > vgapci0: port 0xee00-0xeeff mem > 0xd0000000-0xdfffffff,0xfdfe0000-0xfdfeffff,0xfde00000-0xfdefffff irq 18 at > device 5.0 on pci1 > hdac0: mem 0xfdffc000-0xfdffffff > irq 19 at device 5.1 on pci1 > hdac0: HDA Driver Revision: 20090329_0131 > hdac0: [ITHREAD] > pcib2: irq 18 at device 10.0 on pci0 > pci2: on pcib2 > re0: Ethernet> port 0xde00-0xdeff mem 0xfdaff000-0xfdafffff,0xfdae0000-0xfdaeffff > irq 18 at device 0.0 on pci2 > re0: Using 1 MSI messages > re0: Chip rev. 0x3c000000 > re0: MAC rev. 0x00400000 > miibus0: on re0 > rgephy0: PHY 1 on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > re0: Ethernet address: 00:1f:d0:56:75:23 > re0: [FILTER] > atapci0: port > 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem > 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0 > atapci0: [ITHREAD] > atapci0: AHCI Version 01.10 controller with 6 ports detected > ata2: on atapci0 > ata2: [ITHREAD] > ata3: on atapci0 > ata3: [ITHREAD] > ata4: on atapci0 > ata4: [ITHREAD] > ata5: on atapci0 > ata5: [ITHREAD] > ata6: on atapci0 > ata6: [ITHREAD] > ata7: on atapci0 > ata7: [ITHREAD] > ohci0: mem 0xfe02e000-0xfe02efff irq 16 at > device 18.0 on pci0 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: on ohci0 > usb0: USB revision 1.0 > uhub0: on usb0 > uhub0: 3 ports with 3 removable, self powered > ohci1: mem 0xfe02d000-0xfe02dfff irq 16 at > device 18.1 on pci0 > ohci1: [GIANT-LOCKED] > ohci1: [ITHREAD] > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: on ohci1 > usb1: USB revision 1.0 > uhub1: on usb1 > uhub1: 3 ports with 3 removable, self powered > ehci0: mem 0xfe02c000-0xfe02c0ff irq 17 at > device 18.2 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb2: EHCI version 1.0 > usb2: companion controllers, 3 ports each: usb0 usb1 > usb2: on ehci0 > usb2: USB revision 2.0 > uhub2: on usb2 > uhub2: 6 ports with 6 removable, self powered > ohci2: mem 0xfe02b000-0xfe02bfff irq 18 at > device 19.0 on pci0 > ohci2: [GIANT-LOCKED] > ohci2: [ITHREAD] > usb3: OHCI version 1.0, legacy support > usb3: on ohci2 > usb3: USB revision 1.0 > uhub3: on usb3 > uhub3: 3 ports with 3 removable, self powered > ohci3: mem 0xfe02a000-0xfe02afff irq 18 at > device 19.1 on pci0 > ohci3: [GIANT-LOCKED] > ohci3: [ITHREAD] > usb4: OHCI version 1.0, legacy support > usb4: SMM does not respond, resetting > usb4: on ohci3 > usb4: USB revision 1.0 > uhub4: on usb4 > uhub4: 3 ports with 3 removable, self powered > ehci1: mem 0xfe029000-0xfe0290ff irq 19 at > device 19.2 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb5: EHCI version 1.0 > usb5: companion controllers, 3 ports each: usb3 usb4 > usb5: on ehci1 > usb5: USB revision 2.0 > uhub5: on usb5 > uhub5: 6 ports with 6 removable, self powered > pci0: at device 20.0 (no driver attached) > atapci1: port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0 > ata0: on atapci1 > ata0: [ITHREAD] > hdac1: mem 0xfe024000-0xfe027fff > irq 16 at device 20.2 on pci0 > hdac1: HDA Driver Revision: 20090329_0131 > hdac1: [ITHREAD] > isab0: at device 20.3 on pci0 > isa0: on isab0 > pcib3: at device 20.4 on pci0 > pci3: on pcib3 > fwohci0: mem > 0xfdcff000-0xfdcff7ff,0xfdcf8000-0xfdcfbfff irq 22 at device 14.0 on pci3 > fwohci0: [FILTER] > fwohci0: OHCI version 1.10 (ROM=0) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:70:c0:59:00:00:1f:d0 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: on fwohci0 > fwe0: on firewire0 > if_fwe0: Fake Ethernet address: 02:70:c0:00:1f:d0 > fwe0: Ethernet address: 02:70:c0:00:1f:d0 > fwip0: on firewire0 > fwip0: Firewire address: 00:70:c0:59:00:00:1f:d0 @ 0xfffe00000000, S400, > maxrec 2048 > sbp0: on firewire0 > dcons_crom0: on firewire0 > dcons_crom0: bus_addr 0xb6e80000 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > ohci4: mem 0xfe028000-0xfe028fff irq 18 at > device 20.5 on pci0 > ohci4: [GIANT-LOCKED] > ohci4: [ITHREAD] > usb6: OHCI version 1.0, legacy support > usb6: SMM does not respond, resetting > usb6: on ohci4 > usb6: USB revision 1.0 > uhub6: on usb6 > uhub6: 2 ports with 2 removable, self powered > amdtemp0: on hostb4 > fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio0: [FILTER] > ppc0: port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > ppbus0: [ITHREAD] > plip0: on ppbus0 > plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > cpu0: on acpi0 > powernow0: on cpu0 > cpu1: on acpi0 > powernow1: on cpu1 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio2: configured irq 5 not in bitmap of probed irqs 0 > sio2: port may not be enabled > sio3: configured irq 9 not in bitmap of probed irqs 0 > sio3: port may not be enabled > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > WARNING: ZFS is considered to be an experimental feature in FreeBSD. > Timecounters tick every 1.000 msec > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > ad4: 238474MB at ata2-master SATA150 > ZFS filesystem version 13 > ZFS storage pool version 13 > ad6: 238475MB at ata3-master SATA150 > ad8: 238475MB at ata4-master SATA150 > acd0: DVDR at ata7-master SATA150 > hdac0: HDA Codec #0: ATI RS690/780 HDMI > pcm0: at cad 0 nid 1 on hdac0 > hdac1: HDA Codec #0: Realtek ALC885 > pcm1: at cad 0 nid 1 on hdac1 > pcm2: at cad 0 nid 1 on hdac1 > pcm3: at cad 0 nid 1 on hdac1 > GEOM_LABEL: Label for provider ad4s1a is ufsid/4895a4a721182022. > GEOM_LABEL: Label for provider ad4s1d is ufsid/4895a4b3b6d4e02e. > GEOM_LABEL: Label for provider ad4s1e is ufsid/4895a4b54799f68b. > GEOM_LABEL: Label for provider ad4s1f is ufsid/4895a4b724bcb48f. > GEOM_LABEL: Label for provider ad4s2a is ufsid/49185b60bbfa4d50. > GEOM_LABEL: Label for provider ad6s1 is ext2fs//. > GEOM_LABEL: Label for provider ad6s2 is ext2fs//1. > GEOM_LABEL: Label for provider ad8s1a is ufsid/4895a498589c3d5f. > GEOM_LABEL: Label for provider ad8s1d is ufsid/4895a48d5fd2f14b. > GEOM_LABEL: Label for provider ad8s1e is ufsid/4895a48489eb6120. > GEOM_LABEL: Label for provider ad8s1f is ufsid/4895a48a019d7151. > GEOM_LABEL: Label for provider ad8s2a is ufsid/4729b57b020c7526. > GEOM_LABEL: Label for provider ad8s2d is ufsid/4729b587458f5554. > GEOM_LABEL: Label for provider ad8s2e is ufsid/4729b58af29c6330. > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad4s2a > GEOM_LABEL: Label ufsid/49185b60bbfa4d50 removed. > > > > machine# pciconf -lv > hostb0@pci0:0:0:0: class=0x060000 card=0x96001022 chip=0x96001022 > rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > class = bridge > subclass = HOST-PCI > pcib1@pci0:0:1:0: class=0x060400 card=0x96021022 chip=0x96021022 > rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices (AMD)' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:10:0: class=0x060400 card=0x96001022 chip=0x96091022 > rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices (AMD)' > class = bridge > subclass = PCI-PCI > atapci0@pci0:0:17:0: class=0x010601 card=0xb0021458 chip=0x43911002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 SATA Controller [AHCI mode]' > class = mass storage > subclass = SATA > ohci0@pci0:0:18:0: class=0x0c0310 card=0x50041458 chip=0x43971002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB OHCI0 Controller' > class = serial bus > subclass = USB > ohci1@pci0:0:18:1: class=0x0c0310 card=0x50041458 chip=0x43981002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB OHCI1 Controller' > class = serial bus > subclass = USB > ehci0@pci0:0:18:2: class=0x0c0320 card=0x50041458 chip=0x43961002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB EHCI Controller' > class = serial bus > subclass = USB > ohci2@pci0:0:19:0: class=0x0c0310 card=0x50041458 chip=0x43971002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB OHCI0 Controller' > class = serial bus > subclass = USB > ohci3@pci0:0:19:1: class=0x0c0310 card=0x50041458 chip=0x43981002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB OHCI1 Controller' > class = serial bus > subclass = USB > ehci1@pci0:0:19:2: class=0x0c0320 card=0x50041458 chip=0x43961002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB EHCI Controller' > class = serial bus > subclass = USB > none0@pci0:0:20:0: class=0x0c0500 card=0x43851458 chip=0x43851002 > rev=0x3a hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'ATI SMBus (ATI RD600/RS600)' > class = serial bus > subclass = SMBus > atapci1@pci0:0:20:1: class=0x01018a card=0x50021458 chip=0x439c1002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'PATA 133 Controller (SB7xx)' > class = mass storage > subclass = ATA > hdac1@pci0:0:20:2: class=0x040300 card=0xa0021458 chip=0x43831002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 High Definition Audio Controller' > class = multimedia > subclass = HDA > isab0@pci0:0:20:3: class=0x060100 card=0x43831002 chip=0x439d1002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 LPC host controller' > class = bridge > subclass = PCI-ISA > pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 > rev=0x00 hdr=0x01 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'IXP SB600 PCI to PCI Bridge' > class = bridge > subclass = PCI-PCI > ohci4@pci0:0:20:5: class=0x0c0310 card=0x50041458 chip=0x43991002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'SB700 USB OHCI2 Controller' > class = serial bus > subclass = USB > hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 > rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport > Technology Configuration' > class = bridge > subclass = HOST-PCI > hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 > rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) Address Map' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 > rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 > rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices (AMD)' > device = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:1:5:0: class=0x030000 card=0xd0001458 chip=0x96101002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > device = 'Radeon HD 3200 Integrated Graphics Processor (780G)' > class = display > subclass = VGA > hdac0@pci0:1:5:1: class=0x040300 card=0x960f1002 chip=0x960f1002 > rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > class = multimedia > subclass = HDA > re0@pci0:2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 > hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)' > class = network > subclass = ethernet > fwohci0@pci0:3:14:0: class=0x0c0010 card=0x10001458 chip=0x8024104c > rev=0x00 hdr=0x00 > vendor = 'Texas Instruments (TI)' > device = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller' > class = serial bus > subclass = FireWire > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" -- Robert Noland FreeBSD From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 20:31:19 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0F6701065691; Tue, 25 Aug 2009 20:31:19 +0000 (UTC) (envelope-from thierry@herbelot.com) Received: from smtpfb1-g21.free.fr (smtpfb1-g21.free.fr [212.27.42.9]) by mx1.freebsd.org (Postfix) with ESMTP id E984C8FC1C; Tue, 25 Aug 2009 20:31:15 +0000 (UTC) Received: from smtp4-g21.free.fr (smtp4-g21.free.fr [212.27.42.4]) by smtpfb1-g21.free.fr (Postfix) with ESMTP id D53D32DA47; Tue, 25 Aug 2009 22:14:41 +0200 (CEST) Received: from smtp4-g21.free.fr (localhost [127.0.0.1]) by smtp4-g21.free.fr (Postfix) with ESMTP id 9C5C54C807F; Tue, 25 Aug 2009 22:14:32 +0200 (CEST) Received: from mail.herbelot.nom (bne75-4-82-227-159-103.fbx.proxad.net [82.227.159.103]) by smtp4-g21.free.fr (Postfix) with ESMTP id 9FBAD4C816D; Tue, 25 Aug 2009 22:14:29 +0200 (CEST) Received: from tulipe.herbelot.nom (tulipe.herbelot.nom [192.168.2.5]) by mail.herbelot.nom (8.14.1/8.14.1) with ESMTP id n7PKESAT002345; Tue, 25 Aug 2009 22:14:28 +0200 (CEST) From: Thierry Herbelot To: Robert Noland Date: Tue, 25 Aug 2009 22:14:22 +0200 User-Agent: KMail/1.9.10 References: <4A9412ED.6080309@freebsd.org> <200908252127.48214.thierry.herbelot@free.fr> <1251230025.45706.280.camel@balrog.2hip.net> In-Reply-To: <1251230025.45706.280.camel@balrog.2hip.net> X-Warning: Windows can lose your files X-Op-Sys: Le FriBi de la mort qui tue X-Org: TfH&Co X-MailScanner: Found to be clean MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Content-Disposition: inline Message-Id: <200908252214.22667.thierry@herbelot.com> Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 20:31:19 -0000 Le Tuesday 25 August 2009, Robert Noland a écrit : > On Tue, 2009-08-25 at 21:27 +0200, Thierry Herbelot wrote: > > Le Tuesday 25 August 2009, Sam Fourman Jr. a écrit : > > > > Meanwhile, if you interested in any information about this > > > > motherboard - data dumps, outputs from tools, etc - please let me > > > > know, I will try my best to provide that. > > > > > > it would be interesting to see a dmesg as a starting point. > > > > here you are ;-) > > > > I have plugged a PCI sound board in the machine, but it does seem to be > > detected (there could be some issue with PCI bus enumeration : I also > > include a pciconf log) > > I'm curious why you would plug in a pci sound card? You already have > both a standard hda codec as well as the hda codec for the hdmi port of > the video. If you are discovering that it isn't working... set Initially, this was the issue, before other people sent various howtos around the probe of the hdmi hda port (which by the way sounds *much* better than my previous cmi board). Afterwards, the PCI board remained in the machine (leftover from a previous box), but it is still *not* seen by the PCI enumeration (I'm a bit too lazy to find another spare PCI board and plug it in see what happens : is it also ignored by the BIOS/ACPI/whatever and/or the kernel ?). It seems that it is not either detected by a Linux kernel. TfH > hw.snd.default_unit=1 which is typcially your normal analog audio port. > The hdmi port on radeon chips tends to be enumerated before the normal > system codecs, so people tend to think that sound isn't working. > > robert. > From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 21:28:23 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B65C3106568B; Tue, 25 Aug 2009 21:28:23 +0000 (UTC) (envelope-from rnoland@FreeBSD.org) Received: from gizmo.2hip.net (gizmo.2hip.net [64.74.207.195]) by mx1.freebsd.org (Postfix) with ESMTP id 5E0A88FC18; Tue, 25 Aug 2009 21:28:23 +0000 (UTC) Received: from [192.168.1.4] (adsl-154-198-91.ard.bellsouth.net [72.154.198.91]) (authenticated bits=0) by gizmo.2hip.net (8.14.3/8.14.3) with ESMTP id n7PLSK8a024393 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Tue, 25 Aug 2009 17:28:21 -0400 (EDT) (envelope-from rnoland@FreeBSD.org) From: Robert Noland To: Thierry Herbelot In-Reply-To: <200908252214.22667.thierry@herbelot.com> References: <4A9412ED.6080309@freebsd.org> <200908252127.48214.thierry.herbelot@free.fr> <1251230025.45706.280.camel@balrog.2hip.net> <200908252214.22667.thierry@herbelot.com> Content-Type: text/plain; charset="ISO-8859-1" Organization: FreeBSD Date: Tue, 25 Aug 2009 16:28:15 -0500 Message-Id: <1251235695.45706.375.camel@balrog.2hip.net> Mime-Version: 1.0 X-Mailer: Evolution 2.26.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 8bit X-Spam-Status: No, score=-1.2 required=5.0 tests=AWL,BAYES_00,RCVD_IN_PBL, RCVD_IN_SORBS_DUL, RDNS_DYNAMIC, SPF_SOFTFAIL autolearn=no version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on gizmo.2hip.net Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 21:28:23 -0000 On Tue, 2009-08-25 at 22:14 +0200, Thierry Herbelot wrote: > Le Tuesday 25 August 2009, Robert Noland a écrit : > > On Tue, 2009-08-25 at 21:27 +0200, Thierry Herbelot wrote: > > > Le Tuesday 25 August 2009, Sam Fourman Jr. a écrit : > > > > > Meanwhile, if you interested in any information about this > > > > > motherboard - data dumps, outputs from tools, etc - please let me > > > > > know, I will try my best to provide that. > > > > > > > > it would be interesting to see a dmesg as a starting point. > > > > > > here you are ;-) > > > > > > I have plugged a PCI sound board in the machine, but it does seem to be > > > detected (there could be some issue with PCI bus enumeration : I also > > > include a pciconf log) > > > > I'm curious why you would plug in a pci sound card? You already have > > both a standard hda codec as well as the hda codec for the hdmi port of > > the video. If you are discovering that it isn't working... set > > Initially, this was the issue, before other people sent various howtos around > the probe of the hdmi hda port (which by the way sounds *much* better than my > previous cmi board). > > Afterwards, the PCI board remained in the machine (leftover from a previous > box), but it is still *not* seen by the PCI enumeration (I'm a bit too lazy > to find another spare PCI board and plug it in see what happens : is it also > ignored by the BIOS/ACPI/whatever and/or the kernel ?). > > It seems that it is not either detected by a Linux kernel. Perhaps it isn't seated properly? Or possibly a different slot might help. robert. > TfH > > > hw.snd.default_unit=1 which is typcially your normal analog audio port. > > The hdmi port on radeon chips tends to be enumerated before the normal > > system codecs, so people tend to think that sound isn't working. > > > > robert. > > -- Robert Noland FreeBSD From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 21:59:20 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 333F1106564A; Tue, 25 Aug 2009 21:59:20 +0000 (UTC) (envelope-from sfourman@gmail.com) Received: from mail-gx0-f227.google.com (mail-gx0-f227.google.com [209.85.217.227]) by mx1.freebsd.org (Postfix) with ESMTP id A4E868FC14; Tue, 25 Aug 2009 21:59:19 +0000 (UTC) Received: by gxk27 with SMTP id 27so4438011gxk.12 for ; Tue, 25 Aug 2009 14:59:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=OhSce9O6R5irC/ay9Bx/LnrxMU4rfrdKZShTCwzGyd0=; b=dNU0ph98OoBU78lLNsqjB3G+vYNGB/YzIZR3d/F/s8+6UeZ5pR+pn6Jh3FQP4cDKnP BfwJWE6Q57PpTChlw2xpEBKF0pKmWTMyCACFg0dQtPdQvG2bYoeGreTOxWw+zme4Bgkm Sx9oAT2gkKAcjuSUnmY8/pAJIQIG+OrIpBzjw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=mbN87wuDa8ElM3NXb/HU/WAud6JFevj+O/W6KSUnMMo8OW8A6GsQwKdk/lUXsGcfvX /ZWVjUxyUQ5KCiAtU30r9JPOMD5Tf/4GnKjQjafFVpgYnbW/irLW4vtwzcQW7avBpT10 ssIAk+e2rPJvzaPWrsFjvuMOIxUCdDfHoPj40= MIME-Version: 1.0 Received: by 10.150.88.35 with SMTP id l35mr10029637ybb.274.1251237558683; Tue, 25 Aug 2009 14:59:18 -0700 (PDT) In-Reply-To: <4A9412ED.6080309@freebsd.org> References: <4A9412ED.6080309@freebsd.org> Date: Tue, 25 Aug 2009 16:59:18 -0500 Message-ID: <11167f520908251459r7477fac3kdf3ff6e603a313dd@mail.gmail.com> From: "Sam Fourman Jr." To: Andriy Gapon Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 21:59:20 -0000 On Tue, Aug 25, 2009 at 11:35 AM, Andriy Gapon wrote: > > I have become to own Gigabyte GA-MA780G-UD3H motherboard: > http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=3004&ProductName=GA-MA780G-UD3H > It is based on AMD 780G + SB700. > BTW, CPU I am using is Athlon II X2 250. are you using a i386 or AMD64 kernel? maybe I am blind but I didnt see it in your dmesg Sam Fourman Jr. From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 22:06:14 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E0091106568E; Tue, 25 Aug 2009 22:06:14 +0000 (UTC) (envelope-from bernt@bah.homeip.net) Received: from feeder.usenet4all.se (1-1-1-38a.far.sth.bostream.se [82.182.32.53]) by mx1.freebsd.org (Postfix) with ESMTP id 5F09B8FC19; Tue, 25 Aug 2009 22:06:14 +0000 (UTC) Received: from kw.homeip.net (c80-217-74-129.bredband.comhem.se [80.217.74.129]) by feeder.usenet4all.se (8.13.1/8.13.1) with ESMTP id n7PLtQUC095670; Tue, 25 Aug 2009 23:55:29 +0200 (CEST) (envelope-from bernt@bah.homeip.net) Message-ID: <4A945DC1.8070202@bah.homeip.net> Date: Tue, 25 Aug 2009 23:55:13 +0200 From: Bernt Hansson User-Agent: slrn/1.0.8 (FreeBSD) MIME-Version: 1.0 To: Andriy Gapon References: <4A9412ED.6080309@freebsd.org> In-Reply-To: <4A9412ED.6080309@freebsd.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 22:06:15 -0000 Andriy Gapon said the following on 2009-08-25 18:35: > I have become to own Gigabyte GA-MA780G-UD3H motherboard: > http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=3004&ProductName=GA-MA780G-UD3H > It is based on AMD 780G + SB700. > BTW, CPU I am using is Athlon II X2 250. > > Sorry for the broadcast announcement, but this is my first AMD-based system in > many years, so I eagerly started exploring it and hacking for it. > > For this reason please expect a number of questions from me as well as some > reports and hopefully code related to this motherboard. I am going to post them as > follow-ups to this email. > > Meanwhile, if you interested in any information about this motherboard - data > dumps, outputs from tools, etc - please let me know, I will try my best to provide > that. > It would be interesting to know if you can have usb devices connected and detected during boot. With SB600 you can not. From owner-freebsd-acpi@FreeBSD.ORG Tue Aug 25 22:47:00 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 76FFC106568C; Tue, 25 Aug 2009 22:47:00 +0000 (UTC) (envelope-from kindman@amc-os.com) Received: from smtpfb2-g21.free.fr (smtpfb2-g21.free.fr [212.27.42.10]) by mx1.freebsd.org (Postfix) with ESMTP id 7A89A8FC18; Tue, 25 Aug 2009 22:46:57 +0000 (UTC) Received: from smtp4-g21.free.fr (smtp4-g21.free.fr [212.27.42.4]) by smtpfb2-g21.free.fr (Postfix) with ESMTP id 35036D1A198; Wed, 26 Aug 2009 00:27:59 +0200 (CEST) Received: from smtp4-g21.free.fr (localhost [127.0.0.1]) by smtp4-g21.free.fr (Postfix) with ESMTP id 19DE94C8090; Wed, 26 Aug 2009 00:27:50 +0200 (CEST) Received: from kindman (blackforest.amc-os.net [88.174.102.207]) by smtp4-g21.free.fr (Postfix) with SMTP id E7C894C8072; Wed, 26 Aug 2009 00:27:47 +0200 (CEST) Message-ID: <604B96C6CF22447EACE5BD9719DDE1F5@kindman> From: "Aurélien Méré" To: "Andriy Gapon" , , References: <4A9412ED.6080309@freebsd.org> <4A94242B.7090806@freebsd.org> Date: Wed, 26 Aug 2009 00:27:41 +0200 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5512 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579 X-RFC2646: Format=Flowed; Original Cc: Subject: Re: AMD SB700 SMBus controller driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 25 Aug 2009 22:47:00 -0000 Could you please forward me the patch to make it work in polling mode ? I'd like to test it as I've been trying to make intpm work with a SB400 (which should be quite the same as yours) but system hangs when I try to force polling mode (didn't have the specs nor all the differences you just presented). And btw, I didn't find any implementation using interrupt neither but I'm ready to test your updated version. Thanks, Aurélien ----- Original Message ----- From: "Andriy Gapon" To: ; Sent: Tuesday, August 25, 2009 7:49 PM Subject: AMD SB700 SMBus controller driver > > According to SB700 specifications its SMBus controller is very similar to > one in > PIIX4. > The differences that I see so far: > > 1. Interrupt Line/Interrupt Pin PCI configuration registers (0x3c, 0x3d) > do not > specify interrupt number that the controller could use: >> This register specifies which interrupt pin the device issue >> This module does not generate interrupt but contains the >> actual interrupt controller. This register is hardcoded to 0. > > 2. I2CbusConfig register (0xd2) uses bit #1 to indicate whether SMI or > regular > interrupt is used in interrupt mode; PIIX4 uses bit 3. > > I couldn't get our intpm driver to work with this hardware by simply > adding PCI id > and tweaking 0xd2 bits meaning. > > I could get it to work by forcing polling mode. It appears that Linux > driver for > this HW always uses polling mode, and OpenBSD and NetBSD drivers would use > it with > this HW too. > > I am still trying to get interrupt mode to work. > I set 0xd2 to enable regular interrupt generation (it is set to SMI after > boot). > SB700 specifications say at one place that SMB interrupt is connected to > INTIN20 > pin of IO-APIC in APIC mode. I tried setting up IRQ20 in the driver but no > interrupts are generated. And there are no stray interrupts either. > So I am not sure - either this HW doesn't generate normal interrupts at > all, or > they to a different pin, or additional setup is required, or I am doing > something > wrong. > > Anyway, I plan to produce an updated version of intpm driver with > possibility of > forced or auto-detected polling mode and support for PCI id of SB700 SMBus > controller and its peculiarities. > > -- > Andriy Gapon > _______________________________________________ > freebsd-hackers@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" > From owner-freebsd-acpi@FreeBSD.ORG Wed Aug 26 04:11:08 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BA879106568E; Wed, 26 Aug 2009 04:11:08 +0000 (UTC) (envelope-from thierry@herbelot.com) Received: from smtp4-g21.free.fr (smtp4-g21.free.fr [212.27.42.4]) by mx1.freebsd.org (Postfix) with ESMTP id EF8D28FC22; Wed, 26 Aug 2009 04:11:04 +0000 (UTC) Received: from smtp4-g21.free.fr (localhost [127.0.0.1]) by smtp4-g21.free.fr (Postfix) with ESMTP id A9D8D4C8099; Wed, 26 Aug 2009 06:11:00 +0200 (CEST) Received: from mail.herbelot.nom (bne75-4-82-227-159-103.fbx.proxad.net [82.227.159.103]) by smtp4-g21.free.fr (Postfix) with ESMTP id 820594C8066; Wed, 26 Aug 2009 06:10:57 +0200 (CEST) Received: from tulipe.herbelot.nom (tulipe.herbelot.nom [192.168.2.5]) by mail.herbelot.nom (8.14.1/8.14.1) with ESMTP id n7Q4AppB022458; Wed, 26 Aug 2009 06:10:52 +0200 (CEST) From: Thierry Herbelot To: freebsd-hackers@freebsd.org Date: Wed, 26 Aug 2009 06:10:45 +0200 User-Agent: KMail/1.9.10 References: <4A9412ED.6080309@freebsd.org> <4A945DC1.8070202@bah.homeip.net> In-Reply-To: <4A945DC1.8070202@bah.homeip.net> X-Warning: Windows can lose your files X-Op-Sys: Le FriBi de la mort qui tue X-Org: TfH&Co X-MailScanner: Found to be clean MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Content-Disposition: inline Message-Id: <200908260610.45849.thierry@herbelot.com> Cc: freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org, Bernt Hansson Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Aug 2009 04:11:08 -0000 Le Tuesday 25 August 2009, Bernt Hansson a écrit : > Andriy Gapon said the following on 2009-08-25 18:35: > > I have become to own Gigabyte GA-MA780G-UD3H motherboard: > > http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassV > >alue=Motherboard&ProductID=3004&ProductName=GA-MA780G-UD3H It is based on > > AMD 780G + SB700. > > BTW, CPU I am using is Athlon II X2 250. > > > > Sorry for the broadcast announcement, but this is my first AMD-based > > system in many years, so I eagerly started exploring it and hacking for > > it. > > > > For this reason please expect a number of questions from me as well as > > some reports and hopefully code related to this motherboard. I am going > > to post them as follow-ups to this email. > > > > Meanwhile, if you interested in any information about this motherboard - > > data dumps, outputs from tools, etc - please let me know, I will try my > > best to provide that. > > It would be interesting to know if you can have usb devices connected > and detected during boot. With SB600 you can not. This maybe the explanation why I have to re-plug the USB mouse each time the machine is restarted ;-) (with an SB700) TfH From owner-freebsd-acpi@FreeBSD.ORG Wed Aug 26 08:53:42 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 91624106568E; Wed, 26 Aug 2009 08:53:42 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 6B13D8FC20; Wed, 26 Aug 2009 08:53:41 +0000 (UTC) Received: from porto.topspin.kiev.ua (porto-e.starpoint.kiev.ua [212.40.38.100]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id LAA27442; Wed, 26 Aug 2009 11:53:38 +0300 (EEST) (envelope-from avg@freebsd.org) Received: from localhost.topspin.kiev.ua ([127.0.0.1] helo=edge.pp.kiev.ua) by porto.topspin.kiev.ua with esmtp (Exim 4.34 (FreeBSD)) id 1MgEGA-000NYu-Cm; Wed, 26 Aug 2009 11:53:38 +0300 Message-ID: <4A94F811.8020705@freebsd.org> Date: Wed, 26 Aug 2009 11:53:37 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090723) MIME-Version: 1.0 To: "Sam Fourman Jr." References: <4A9412ED.6080309@freebsd.org> <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> In-Reply-To: <11167f520908251134u7454267fl7a4e1e4657405a6f@mail.gmail.com> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: GA-MA780G-UD3H motherboard X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Aug 2009 08:53:42 -0000 on 25/08/2009 21:34 Sam Fourman Jr. said the following: >> Meanwhile, if you interested in any information about this motherboard - data >> dumps, outputs from tools, etc - please let me know, I will try my best to provide >> that. > > it would be interesting to see a dmesg as a starting point. Please see http://people.freebsd.org/~avg/ga-ma780g-ud3h/ Replying to the other email - I use amd64 arch. -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Wed Aug 26 09:00:51 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6E1C9106568E; Wed, 26 Aug 2009 09:00:51 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 7AD788FC26; Wed, 26 Aug 2009 09:00:50 +0000 (UTC) Received: from porto.topspin.kiev.ua (porto-e.starpoint.kiev.ua [212.40.38.100]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id MAA27703; Wed, 26 Aug 2009 12:00:47 +0300 (EEST) (envelope-from avg@freebsd.org) Received: from localhost.topspin.kiev.ua ([127.0.0.1] helo=edge.pp.kiev.ua) by porto.topspin.kiev.ua with esmtp (Exim 4.34 (FreeBSD)) id 1MgEN4-000Na1-6K; Wed, 26 Aug 2009 12:00:46 +0300 Message-ID: <4A94F9BD.70907@freebsd.org> Date: Wed, 26 Aug 2009 12:00:45 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090723) MIME-Version: 1.0 To: kindman@amc-os.com References: <4A9412ED.6080309@freebsd.org> <4A94242B.7090806@freebsd.org> <604B96C6CF22447EACE5BD9719DDE1F5@kindman> In-Reply-To: <604B96C6CF22447EACE5BD9719DDE1F5@kindman> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Cc: freebsd-hackers@freebsd.org, freebsd-acpi@freebsd.org Subject: Re: AMD SB700 SMBus controller driver X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Aug 2009 09:00:51 -0000 on 26/08/2009 01:27 said the following: > Could you please forward me the patch to make it work in polling mode ? I'd > like to test it as I've been trying to make intpm work with a SB400 (which > should be quite the same as yours) but system hangs when I try to force > polling mode (didn't have the specs nor all the differences you just > presented). And btw, I didn't find any implementation using interrupt > neither but I'm ready to test your updated version. [what charset/encoding was your email?] Please see: http://people.freebsd.org/~avg/ga-ma780g-ud3h/intpm.diff The patch is work-in-progress and is not clean for this reason (style violations, experimental hacks) What the patch does: 1. redefine PCI_INTR_SMB_IRQ9 to 2 (bit 1) 2. disable writing to PCIR_INTLINE 3. add PCI id of my hardware 4. attempt to use IRQ mode with interrupt 20 - doesn't work 5. force polling mode - seems to work -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Wed Aug 26 09:24:45 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 752D8106568B for ; Wed, 26 Aug 2009 09:24:45 +0000 (UTC) (envelope-from avg@icyb.net.ua) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 2467B8FC19 for ; Wed, 26 Aug 2009 09:24:43 +0000 (UTC) Received: from porto.topspin.kiev.ua (porto-e.starpoint.kiev.ua [212.40.38.100]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id MAA27955 for ; Wed, 26 Aug 2009 12:07:29 +0300 (EEST) (envelope-from avg@icyb.net.ua) Received: from localhost.topspin.kiev.ua ([127.0.0.1] helo=edge.pp.kiev.ua) by porto.topspin.kiev.ua with esmtp (Exim 4.34 (FreeBSD)) id 1MgETZ-000NaP-7z for freebsd-acpi@freebsd.org; Wed, 26 Aug 2009 12:07:29 +0300 Message-ID: <4A94FB50.3070204@icyb.net.ua> Date: Wed, 26 Aug 2009 12:07:28 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090723) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: athlon II and amdtemp X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Aug 2009 09:24:45 -0000 It seems that amdtemp might be incorrectly reporting temperature for Athlon II processors. I have Athlon II X2 250. amdtemp attaches and reports. But it reports 22.5C temperature (on an idle system) while room temperature is 25C according to my old reliable thermometer on the wall. -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Wed Aug 26 13:25:42 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 834C3106568F for ; Wed, 26 Aug 2009 13:25:42 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id B192F8FC14 for ; Wed, 26 Aug 2009 13:25:41 +0000 (UTC) Received: from odyssey.starpoint.kiev.ua (alpha-e.starpoint.kiev.ua [212.40.38.101]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id QAA04892 for ; Wed, 26 Aug 2009 16:25:40 +0300 (EEST) (envelope-from avg@freebsd.org) Message-ID: <4A9537D3.6060703@freebsd.org> Date: Wed, 26 Aug 2009 16:25:39 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.22 (X11/20090724) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org References: <4A94FB50.3070204@icyb.net.ua> In-Reply-To: <4A94FB50.3070204@icyb.net.ua> X-Enigmail-Version: 0.95.7 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: athlon II and amdtemp X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 26 Aug 2009 13:25:42 -0000 on 26/08/2009 12:07 Andriy Gapon said the following: > It seems that amdtemp might be incorrectly reporting temperature for Athlon II > processors. > I have Athlon II X2 250. amdtemp attaches and reports. > But it reports 22.5C temperature (on an idle system) while room temperature is > 25C according to my old reliable thermometer on the wall. Oh, sorry for the noise! I read the specs again and now I see that the reported temperature on this processor is _not_ physical temperature. It is useful for comparison with Tctl_max, which is measured on the same scale. BTW, for this CPU family (Athlon II, 45nm, 65W), Tctl_max is 70C. -- Andriy Gapon From owner-freebsd-acpi@FreeBSD.ORG Thu Aug 27 03:54:29 2009 Return-Path: Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0ACB3106564A; Thu, 27 Aug 2009 03:54:29 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id D71E08FC29; Thu, 27 Aug 2009 03:54:28 +0000 (UTC) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id n7R3sSlL053898; Thu, 27 Aug 2009 03:54:28 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id n7R3sSU0053894; Thu, 27 Aug 2009 03:54:28 GMT (envelope-from linimon) Date: Thu, 27 Aug 2009 03:54:28 GMT Message-Id: <200908270354.n7R3sSU0053894@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-amd64@FreeBSD.org, freebsd-acpi@FreeBSD.org From: linimon@FreeBSD.org Cc: Subject: Re: amd64/138210: [acpi] acer aspire 5536 ACPI problems (S3, brightness, hotkeys) X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 27 Aug 2009 03:54:29 -0000 Synopsis: [acpi] acer aspire 5536 ACPI problems (S3, brightness, hotkeys) Responsible-Changed-From-To: freebsd-amd64->freebsd-acpi Responsible-Changed-By: linimon Responsible-Changed-When: Thu Aug 27 03:54:06 UTC 2009 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=138210 From owner-freebsd-acpi@FreeBSD.ORG Sat Aug 29 16:17:01 2009 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id B671E1065673 for ; Sat, 29 Aug 2009 16:17:01 +0000 (UTC) (envelope-from avg@freebsd.org) Received: from citadel.icyb.net.ua (citadel.icyb.net.ua [212.40.38.140]) by mx1.freebsd.org (Postfix) with ESMTP id 075798FC26 for ; Sat, 29 Aug 2009 16:17:00 +0000 (UTC) Received: from porto.topspin.kiev.ua (porto-e.starpoint.kiev.ua [212.40.38.100]) by citadel.icyb.net.ua (8.8.8p3/ICyb-2.3exp) with ESMTP id TAA12523 for ; Sat, 29 Aug 2009 19:16:59 +0300 (EEST) (envelope-from avg@freebsd.org) Received: from localhost.topspin.kiev.ua ([127.0.0.1]) by porto.topspin.kiev.ua with esmtp (Exim 4.34 (FreeBSD)) id 1MhQbq-000BYx-QA for freebsd-acpi@freebsd.org; Sat, 29 Aug 2009 19:16:58 +0300 Message-ID: <4A99547A.7090809@freebsd.org> Date: Sat, 29 Aug 2009 19:16:58 +0300 From: Andriy Gapon User-Agent: Thunderbird 2.0.0.23 (X11/20090823) MIME-Version: 1.0 To: freebsd-acpi@freebsd.org Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: acpi_wmi dependency on acpi_ec X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Aug 2009 16:17:01 -0000 Does acpi_wmi have to depend on acpi_ec so strongly as it does now? The reason I am asking is that I have a desktop system that seems to provide "something WMI", but doesn't have an EC: http://people.freebsd.org/~avg/ga-ma780g-ud3h/acpi.asl I use the following crude hack: http://people.freebsd.org/~avg/ga-ma780g-ud3h/acpi_wmi.diff With the hack acpi_wmi attaches nicely and here is some data: $ cat /dev/wmistat GUID INST EXPE METH STR EVENT OID {ABBC0F6A-8EA1-11D1-00A0-C90629100000} 1 NO WMAA NO NO AA {05901221-D566-11D1-B2F0-00A0C9062910} 1 NO NO NO NO BA I am not sure how to proceed next and if I can actually get anything useful with WMI on this system. For now I extracted binary MOF file stored in WQBA and used wmimofck utility (from Windows Driver Kit) on it. The following is the resulting header file: http://people.freebsd.org/~avg/ga-ma780g-ud3h/wq.h Any advice on what I could try next? Thank you in advance. P.S. Sorry for packing two distinct questions into the same posting. -- Andriy Gapon