From owner-freebsd-arm@FreeBSD.ORG Mon Dec 7 11:06:51 2009 Return-Path: Delivered-To: freebsd-arm@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0058310656BF for ; Mon, 7 Dec 2009 11:06:50 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E34E68FC24 for ; Mon, 7 Dec 2009 11:06:50 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id nB7B6ouZ068420 for ; Mon, 7 Dec 2009 11:06:50 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id nB7B6orw068418 for freebsd-arm@FreeBSD.org; Mon, 7 Dec 2009 11:06:50 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 7 Dec 2009 11:06:50 GMT Message-Id: <200912071106.nB7B6orw068418@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-arm@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-arm@FreeBSD.org X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Dec 2009 11:06:51 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o arm/134368 arm [patch] nslu2_led driver for the LEDs on the NSLU2 o arm/134338 arm [patch] Lock GPIO accesses on ixp425 o arm/134092 arm [patch] NSLU.hints contains wrong hints for on board n 3 problems total. From owner-freebsd-arm@FreeBSD.ORG Tue Dec 8 16:32:22 2009 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 2CCE1106566B for ; Tue, 8 Dec 2009 16:32:22 +0000 (UTC) (envelope-from pczanik@fang.fa.gau.hu) Received: from b.relay.invitel.net (b.relay.invitel.net [62.77.203.4]) by mx1.freebsd.org (Postfix) with ESMTP id DC9BF8FC16 for ; Tue, 8 Dec 2009 16:32:21 +0000 (UTC) Received: from mail.invitel.hu (mail.invitel.hu [213.163.59.4]) by b.relay.invitel.net (Invitel Core SMTP Transmitter) with ESMTP id 6AA4C31A09D for ; Tue, 8 Dec 2009 17:12:53 +0100 (CET) Received: from [192.168.2.179] ([82.131.202.113]) by mail.invitel.hu (Invitel Messaging Server) with ESMTPA id <0KUC00M23D1H6W31@invitel.hu> for freebsd-arm@freebsd.org; Tue, 08 Dec 2009 17:12:53 +0100 (CET) Date: Tue, 08 Dec 2009 17:11:45 +0100 From: Peter Czanik To: freebsd-arm@freebsd.org Message-id: <4B1E7AC1.4050400@fang.fa.gau.hu> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-2 Content-transfer-encoding: 7BIT User-Agent: Mozilla/5.0 (X11; U; Linux i686; hu-HU; rv:1.9.1.4pre) Gecko/20090915 SUSE/3.0b4-3.6 Thunderbird/3.0b4 Subject: imx515 X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Dec 2009 16:32:22 -0000 Hello, There is a developer board program for the Freescale iMX515 chip available at http://projects.powerdeveloper.org/program/imx515 Right now I use it with Linux, but would be glad to test it with FreeBSD, if anybody wanted to port it to the board! Some additional links: http://blog.efikamx.info/ http://www.genesi-usa.com/products/efika Bye, CzP From owner-freebsd-arm@FreeBSD.ORG Wed Dec 9 03:04:20 2009 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BCB3910656BE for ; Wed, 9 Dec 2009 03:04:20 +0000 (UTC) (envelope-from franson@gmail.com) Received: from mail-pz0-f185.google.com (mail-pz0-f185.google.com [209.85.222.185]) by mx1.freebsd.org (Postfix) with ESMTP id 9522B8FC13 for ; Wed, 9 Dec 2009 03:04:20 +0000 (UTC) Received: by pzk15 with SMTP id 15so2833071pzk.3 for ; Tue, 08 Dec 2009 19:04:20 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:sender:received:in-reply-to :references:date:x-google-sender-auth:message-id:subject:from:to :content-type; bh=dEfzAVL+k8R8a4eBf6yQdY3T//IP1vPAQguL/bqt8l4=; b=s8i5674FNPhSuQwGtuHg4UCyGQ3vfBF36FOG+4Sz4xqSTo43GaVGzWucAGKRrSqfxI UO3wZ7HQsHXfmIGxfMq6TCz/OTl/L24QHyUxrVM02gkezvXNjDJqGqegmptvx2a1E+9T jfQwKtgXvJ7qls48SrnYUrOHSDFgHi/ySKBOM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:sender:in-reply-to:references:date :x-google-sender-auth:message-id:subject:from:to:content-type; b=aUHz3SkT5+OIwmnXVIMwuuhn2x1AxMiP3/EVXSVvUNZWQTVYNxIcTAQrp7uIB27fIP AHYga31Hl6+dgtjmDkp/Hees6KitTTgcUxN0QoSn4FpNlAD663bc4Z98/MOCOWvUbyRI 0yKrVN9E1njDGUifTKNHYUi651XkrT3PdWbAE= MIME-Version: 1.0 Sender: franson@gmail.com Received: by 10.141.108.17 with SMTP id k17mr55013rvm.195.1260327859608; Tue, 08 Dec 2009 19:04:19 -0800 (PST) In-Reply-To: <4B1E7AC1.4050400@fang.fa.gau.hu> References: <4B1E7AC1.4050400@fang.fa.gau.hu> Date: Wed, 9 Dec 2009 11:04:19 +0800 X-Google-Sender-Auth: 7cf25b54a0dee4ab Message-ID: From: quickembed To: freebsd-arm@freebsd.org Content-Type: text/plain; charset=ISO-8859-1 Subject: Re: imx515 X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 09 Dec 2009 03:04:20 -0000 who want multimedia codec like h.264/aac etc on this imx515 or imx27/imx31 platform can contact us, we provide support. 2009/12/9 Peter Czanik : > Hello, > There is a developer board program for the Freescale iMX515 chip > available at http://projects.powerdeveloper.org/program/imx515 Right now > I use it with Linux, but would be glad to test it with FreeBSD, if > anybody wanted to port it to the board! > Some additional links: > http://blog.efikamx.info/ > http://www.genesi-usa.com/products/efika > Bye, > CzP > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > From owner-freebsd-arm@FreeBSD.ORG Thu Dec 10 13:35:26 2009 Return-Path: Delivered-To: freebsd-arm@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E3E4C106566B for ; Thu, 10 Dec 2009 13:35:26 +0000 (UTC) (envelope-from toshi@ruby.ocn.ne.jp) Received: from smtp.ruby.ocn.ne.jp (ruby.ocn.ne.jp [61.207.12.164]) by mx1.freebsd.org (Postfix) with ESMTP id 6BDF88FC0C for ; Thu, 10 Dec 2009 13:35:26 +0000 (UTC) Received: from localhost (p6194-ipadfx01sizuokaden.shizuoka.ocn.ne.jp [219.160.179.194]) by smtp.ruby.ocn.ne.jp (Postfix) with ESMTP id 1E5162E2A; Thu, 10 Dec 2009 21:53:50 +0900 (JST) Date: Thu, 10 Dec 2009 21:53:47 +0900 (JST) Message-Id: <20091210.215347.48520467.toshi@ruby.ocn.ne.jp> To: freebsd-arm@FreeBSD.org From: SAITOU Toshihide In-Reply-To: <8A5691CD-5E1B-4C5F-BC45-6AC8AEEEAD51@semihalf.com> References: <1324A9FE-D45B-479E-9705-5FCFA2FAC9E0@semihalf.com> <49FBB5F8.3090104@donhayford.com> <8A5691CD-5E1B-4C5F-BC45-6AC8AEEEAD51@semihalf.com> X-GPG-fingerprint: 34B3 0B6A 8520 F5B0 EBC7 69F6 C055 9F8A 0D49 F8FC X-Mailer: Mew version 6.2.51 on Emacs 22.3 / Mule 5.0 (SAKAKI) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Subject: Re: Help with Marvel kernel for 88F5512 X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 10 Dec 2009 13:35:27 -0000 From: raj at semihalf.com (Rafal Jaworowski) Subject: Help with Marvel kernel for 88F5512 Date: Sat May 2 15:19:37 2009 > On 2009-05-02, at 04:54, Donald T Hayford wrote: > >> Rafal Jaworowski wrote: >>> >>> On 2009-05-01, at 04:07, Donald T Hayford wrote: >>>> twsi0: at mem >>>> 0xf1011000-0xf101101f on mbus0 >>>> iicbus0: on twsi0 >>>> iicbus0: at addr 0 >>>> iic0: on iicbus0 >>>> pcib1: at mem >>>> 0xf1030000-0xf1031fff on mbus0 >>>> >>>> At this point, the device hangs until I reboot it. >>> >>> Could you please compile out PCI support to see whether this hang >>> is somehow PCI-related? >>> >> The Kurobox Pro appears to be booting more-or-less correctly now. >> Following is the boot up message. > > It appears there are some problems around PCI then. Are there any > peripheral devices behind the PCI bridge on the KBP device? Very > likely the IRQ routing map is different on your board than the default > (DB-88F5281 board). The pci_irq_map[] table (sys/arm/mv/orion/ > db88f5xxx.c) needs to be verified against KBP interrupts connections > and adjusted accordingly (actually a dedicated file should be provided > as a final solution for your device: sys/arm/mv/orion/kuroboxpro.c or > so, with with all board-specific items equivalent to what we have for > DB- systems). I change the IRQ in the pci_irq_map[] with the value GPIO2IRQ(11) and also change the MPP setting then compile with option pci, but freeze at the same point. At this time I refer to the following: http://fxr.watson.org/fxr/source/arch/arm/mach-orion/kurobox_pro-setup.c?v=linux-2.6 http://fxr.watson.org/fxr/source/include/asm-arm/arch-orion/irqs.h?v=linux-2.6 Maybe KBP has a PCI Express connector but doesn't have any other PCI connector, Is this related to the problem? >> Note towards the end a warning about "no time-of-day clock". The >> kernel is also not recognizing the attached SATA drive (because PCI >> is disabled?) or USB disk. > > Time of day wanings are likely due to no driver for the RTC part (the > default compiled in is DS133x). What RTC chip is there on the KBP > device? > > There's no driver in the tree for the integrated SATA controller at > the moment, but it's currently under work. > > The problems with USB device not recognized could be related to the > new USB stack, which wasn't much tested on MV systems. Please switch > to the legacy stack and let us know if the problem persists. > > Rafal SAITOU Toshihide From owner-freebsd-arm@FreeBSD.ORG Fri Dec 11 14:27:48 2009 Return-Path: Delivered-To: freebsd-arm@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 28BA71065679 for ; Fri, 11 Dec 2009 14:27:48 +0000 (UTC) (envelope-from yohanes@gmail.com) Received: from mail-px0-f182.google.com (mail-px0-f182.google.com [209.85.216.182]) by mx1.freebsd.org (Postfix) with ESMTP id ED3538FC16 for ; Fri, 11 Dec 2009 14:27:47 +0000 (UTC) Received: by pxi12 with SMTP id 12so721146pxi.3 for ; Fri, 11 Dec 2009 06:27:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:from:date:message-id :subject:to:content-type; bh=6GIGApfrd8GhihmBP/YL7IiXTe8c//yA9zj4alitvl4=; b=WnpIDKrKuuTinXmRAxTt10iefS9cTEIgdAKyXMzXTa6HBD0bQWwl/1DUOQXUOzgmtU D3pqo6MV034ydUPmrsrTZuRAu7rCG8+c8kbwcmPpIUGXyYvnEygVNnjTkNoyhvw/fwQP P36Iuj5b1QI/FOzF8dsn96i9rgOjvHmRrH0l0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:from:date:message-id:subject:to:content-type; b=NSgsnBv9qYs30SV3250KJGg81t48OabB2huCBItTQAxgjXw/BBWi86GFthR+t65RE5 UKLXekRS/9kC35C8aHtKWBG7eZFPkEujnfvanSOm5+3QDyS8ADCTxZwQn2ScLtI83rbf rMHxFoj3a5b9+NYQFAfJ1ZDBQG+G6l0FADqXc= MIME-Version: 1.0 Received: by 10.115.38.40 with SMTP id q40mr901944waj.95.1260541666869; Fri, 11 Dec 2009 06:27:46 -0800 (PST) From: Yohanes Nugroho Date: Fri, 11 Dec 2009 21:27:26 +0700 Message-ID: <260bb65e0912110627o6b67b399vabaae57477b91023@mail.gmail.com> To: freebsd-arm@freebsd.org Content-Type: multipart/mixed; boundary=0016e64c388a474465047a74ba3d Subject: CNS11XX FreeBSD port completed X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the StrongARM Processor List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 11 Dec 2009 14:27:48 -0000 --0016e64c388a474465047a74ba3d Content-Type: text/plain; charset=UTF-8 Hi, Today I have "completed" the CNS11XX (Cavium Econa ARM formerly known as StarSemi STR9104) FreeBSD ARM Port. By "complete" I mean I have written all the drivers (usb, network, and flash). I haven't checked the correctness of the implementation. The device is a network attached storage, Emprex NSD-100, sent to me by Bruce Simpson. This is my first FreeBSD port, so I think there will be mistakes on my code. So I am requesting anyone who have time to have a look at the code, or if you have the same device, may be you can try it. You will need to solder a serial port to the device to try it. >From the usability point of view, the port is usable. I can put the FreeBSD kernel to the flash, and boot it from there with the root filesystem on a USB disk (the boot loader also supports booting from tftp, and during the development I boot using tftp). The device can enter multi user mode, and I can ssh/ftp to the device, and compile some things on the device itself. The only problem left (at least what is visible from user space) is the slow network speed (2 megabyte per second, while the linux version is around 3.8 megabyte per second). Pyun YongHyeon have helped me a lot with the network driver (I am currently asking him to have a final look at the driver). I have tried following all of his suggestions to make a better (more correct driver), and I suspect the problem is not on the network driver itself. I am suspecting that the problem is in pmap. There has been several pmap related problems lately (see http://lists.freebsd.org/pipermail/freebsd-arm/2009-October/002030.html). It is also possible that the pmap code is now fine, and I have made errors when porting the NetBSD CPU code for FA526 to FreeBSD. If I compile my current code with the latest code from HEAD, and activated WITNESS and DIAGNOSTIC i will get the error at err-1.txt, and If I activated WITNESS, DIAGNOSTIC and INVARIANT i got this the message in err-2.txt. With the same options I didn't get this error several months ago . My code is available at http://p4db.freebsd.org/depotTreeBrowser.cgi?FSPC=//depot/projects/str91xx/src/sys/arm/econa&HIDEDEL=NO plus additional code from to support FA526 CPU adapted from NetBSD: http://p4db.freebsd.org/fileLogView.cgi?FSPC=//depot/projects/str91xx/src/sys/arm/arm/cpufunc_asm_fa526.S http://p4db.freebsd.org/fileViewer.cgi?FSPC=//depot/projects/str91xx/src/sys/arm/arm/cpufunc.c Instruction to compile, and write to flash using dd to cfi0 is available at: http://tinyhack.com/2009/09/28/cnx11xxstr91xx-freebsd-progress/ http://tinyhack.com/2009/12/11/cns11xx-freebsd-port-completed/ -- Regards Yohanes http://yohan.es/ --0016e64c388a474465047a74ba3d Content-Type: text/plain; charset=US-ASCII; name="err-1.txt" Content-Disposition: attachment; filename="err-1.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_g331t0pq0 LS0tLS0tCnN0YXJ0X2luaXQ6IHRyeWluZyAvc2Jpbi9pbml0CmxvY2sgb3JkZXIgcmV2ZXJzYWw6 CiAxc3QgMHhjMTllMDBiMCBwbWFwIChwbWFwKSBAIGFybS9hcm0vcG1hcC5jOjkyOQogMm5kIDB4 YzE0MGE2YzAgdm0gcGFnZSBxdWV1ZSBtdXRleCAodm0gcGFnZSBxdWV1ZSBtdXRleCkgQCBhcm0v YXJtL3BtYXAuYzoxNjU2CktEQjogc3RhY2sgYmFja3RyYWNlOgpfZW5kKCkgYXQgMHhlM2UwMTAw MApzY3A9MHhlM2UwMTAwMCBybHY9MHhlNTliMDAwMCAoMHhlNTliMDAwMCkKCXJzcD0weGUyNGNi MDA0IHJmcD0weGU5MmRkODAwbG9jayBvcmRlciByZXZlcnNhbDoKIDFzdCAweGMxOWUwMGIwIHBt YXAgKHBtYXApIEAgYXJtL2FybS9wbWFwLmM6MTkxNgogMm5kIDB4YzE0YTQwNWMgc3lzdGVtIG1h cCAoc3lzdGVtIG1hcCkgQCB2bS92bV9tYXAuYzozNTMyCktEQjogc3RhY2sgYmFja3RyYWNlOgpf ZW5kKCkgYXQgMHhlM2UwMTAwMApzY3A9MHhlM2UwMTAwMCBybHY9MHhlNTliMDAwMCAoMHhlNTli MDAwMCkKCXJzcD0weGUyNGNiMDA0IHJmcD0weGU5MmRkODAwCnZtX2ZhdWx0KDB4YzE0YTQwMDAs IGUzZTAwMDAwLCAxLCAwKSAtPiAxCkZhdGFsIGtlcm5lbCBtb2RlIGRhdGEgYWJvcnQ6ICdUcmFu c2xhdGlvbiBGYXVsdCAoUyknCnRyYXBmcmFtZTogMHhjNjc5MzJkNApGU1I9MDAwMDAwMDUsIEZB Uj1lM2UwMGZmNCwgc3Bzcj02MDAwMDAxMwpyMCA9MDAwMDAwMWUsIHIxID0wMDAwMDAwMCwgcjIg PTAwMDAwMDAwLCByMyA9MDAwMDAwMDAKcjQgPWUzZTAxMDAwLCByNSA9YzExZjIxZjAsIHI2ID1m ZmZmZmZmZiwgcjcgPWMxOTljMTEwCnI4ID1mZmZmZmZmZSwgcjkgPWZmZmZmZmY0LCByMTA9YzEx ZjIxZTQsIHIxMT1jNjc5MzM1OApyMTI9MDAwMDAwMDAsIHNzcD1jNjc5MzMyMCwgc2xyPWMxMjAx NjU4LCBwYyA9YzExZjIwYzgKClt0aHJlYWQgcGlkIDEgdGlkIDEwMDAwMSBdClN0b3BwZWQgYXQg ICAgICBkYl9tZF9zZXRfd2F0Y2hwb2ludCsweGI4OiAgICAgIGxkciAgICAgcjcsIFtyOSwgcjRd CmRiPiAKLS0tLS0tCgo= --0016e64c388a474465047a74ba3d Content-Type: text/plain; charset=US-ASCII; name="err-2.txt" Content-Disposition: attachment; filename="err-2.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_g331t4n11 dWdlbjAuMTogPENhdml1bT4gYXQgdXNidXMwCnVodWIwOiA8Q2F2aXVtIE9IQ0kgcm9vdCBIVUIs IGNsYXNzIDkvMCwgcmV2IDEuMDAvMS4wMCwgYWRkciAxPiBvbiB1c2J1czAKdWdlbjEuMTogPENh dml1bT4gYXQgdXNidXMxCnVodWIxOiA8Q2F2aXVtIEVIQ0kgcm9vdCBIVUIsIGNsYXNzIDkvMCwg cmV2IDIuMDAvMS4wMCwgYWRkciAxPiBvbiB1c2J1czEKdWh1YjA6IDIgcG9ydHMgd2l0aCAyIHJl bW92YWJsZSwgc2VsZiBwb3dlcmVkCnVodWIxOiAyIHBvcnRzIHdpdGggMiByZW1vdmFibGUsIHNl bGYgcG93ZXJlZApsb2NrIG9yZGVyIHJldmVyc2FsOgogMXN0IDB4YzE0NGM4ZDQgcG1hcCAocG1h cCkgQCBhcm0vYXJtL3BtYXAuYzoyOTQxCiAybmQgMHhjMTRkZTYwOCBQViBFTlRSWSAoVU1BIHpv bmUpIEAgdm0vdW1hX2NvcmUuYzoyNTI2CktEQjogc3RhY2sgYmFja3RyYWNlOgpfZW5kKCkgYXQg MHhlM2UwMTAwMApzY3A9MHhlM2UwMTAwMCBybHY9MHhlNTliMDAwMCAoMHhlNTliMDAwMCkKCXJz cD0weGUyNGNiMDA0IHJmcD0weGU5MmRkODAwbG9jayBvcmRlciByZXZlcnNhbDoKIDFzdCAweGMx NDRjOGQ0IHBtYXAgKHBtYXApIEAgYXJtL2FybS9wbWFwLmM6Mjk0MQogMm5kIDB4YzE0ZGMwNWMg c3lzdGVtIG1hcCAoc3lzdGVtIG1hcCkgQCB2bS92bV9tYXAuYzozNTMyCktEQjogc3RhY2sgYmFj a3RyYWNlOgpfZW5kKCkgYXQgMHhlM2UwMTAwMApzY3A9MHhlM2UwMTAwMCBybHY9MHhlNTliMDAw MCAoMHhlNTliMDAwMCkKCXJzcD0weGUyNGNiMDA0IHJmcD0weGU5MmRkODAwCnZtX2ZhdWx0KDB4 YzE0ZGMwMDAsIGUzZTAwMDAwLCAxLCAwKSAtPiAxCkZhdGFsIGtlcm5lbCBtb2RlIGRhdGEgYWJv cnQ6ICdUcmFuc2xhdGlvbiBGYXVsdCAoUyknCnRyYXBmcmFtZTogMHhjNmMxOTI3MApGU1I9MDAw MDAwMDUsIEZBUj1lM2UwMGZmNCwgc3Bzcj02MDAwMDAxMwpyMCA9MDAwMDAwMWUsIHIxID0wMDAw MDAwMCwgcjIgPTAwMDAwMDAwLCByMyA9MDAwMDAwMDAKcjQgPWUzZTAxMDAwLCByNSA9YzEyMWE5 MmMsIHI2ID1jMTlkMzExMCwgcjcgPWZmZmZmZmZmCnI4ID1mZmZmZmZmZSwgcjkgPWZmZmZmZmY0 LCByMTA9YzEyMWE5MjAsIHIxMT1jNmMxOTJmNApyMTI9MDAwMDAwMDAsIHNzcD1jNmMxOTJiYywg c2xyPWMxMjJhODMwLCBwYyA9YzEyMWE4MDQKClt0aHJlYWQgcGlkIDEzIHRpZCAxMDAwMjcgXQpT dG9wcGVkIGF0ICAgICAgZGJfbWRfc2V0X3dhdGNocG9pbnQrMHhiODpwYW5pYzogX210eF9sb2Nr X3NsZWVwOiByZWN1cnNlZCBvbiBub24tcmVjdXJzaXZlIG11dGV4IHBtYXAgQCAuLi8uLi8uLi9h cm0vYXJtL3BtYXAuYzozNzE5CgpVcHRpbWU6IDNzCkNhbm5vdCBkdW1wLiBEZXZpY2Ugbm90IGRl ZmluZWQgb3IgdW5hdmFpbGFibGUuCkF1dG9tYXRpYyByZWJvb3QgaW4gMTUgc2Vjb25kcyAtIHBy ZXNzIGEga2V5IG9uIHRoZSBjb25zb2xlIHRvIGFib3J0Cgo= --0016e64c388a474465047a74ba3d--