Date: Fri, 23 Oct 2009 01:03:44 -0700 (PDT) From: Donn Miller <hackr_d@yahoo.com> To: freebsd-mobile@freebsd.org Subject: Toshiba Satellite L305-S5955 Message-ID: <39705.24155.qm@web35708.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Working fine, except built-in ethernet doesn't work, can't adjust screen brightness, even when acpi_video is working. The built in wifi isn't working either, but I expected that, since it's a Realtek 8187B.
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0410000-0xd0410fff,0xd0400000-0xd040ffff irq 16 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x34800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x34c00000
device_attach: re0 attach returned 6
See, it's a RealTek that's long been supported in FreeBSD, but there is a HW revision that makes it not attach properly. Also, it looks like Toshibas do something different with the acpi video, as there is a Tosiba acpi module there as well, though that doesn't work either. I used a USB ethernet, so the network is not a problem.
Here is the working USB ethernet:
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 00:50:b6:05:fc:04
Attached all relevant outputs from dmesg, pciconf, devinfo, and acpidump.
Everything else seems to be working fine.
Donn
[-- Attachment #2 --]
nexus0
apic0
ram0
I/O memory addresses:
0x0-0x9dfff
0x100000-0xb7b6efff
0xb7bbf000-0xb7c85fff
0xb7cbf000-0xb7cebfff
0xb7cff000-0xb7cfffff
0x100000000-0x13fffffff
acpi0
Interrupt request lines:
9
I/O ports:
0x2e-0x2f
0x4e-0x4f
0x61
0x63
0x65
0x67
0x68
0x6c
0x70
0x80
0x92
0xb2-0xb3
0x400-0x47f
0x500-0x57f
0x580-0x5ff
0x600-0x627
0x800-0x80f
0x810-0x817
0x820-0x823
0x164e-0x164f
I/O memory addresses:
0xf8000000-0xfbffffff
0xfec00000-0xfec00fff
0xfed10000-0xfed13fff
0xfed18000-0xfed18fff
0xfed19000-0xfed19fff
0xfed1c000-0xfed1ffff
0xfed20000-0xfed8ffff
0xfee00000-0xfee00fff
0xff800000-0xffffffff
cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0
ACPI I/O ports:
0x414
0x415
acpi_throttle0
p4tcc0
cpufreq0
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3
unknown pnpinfo _HID=PNP0C32 _UID=1 at handle=\_SB_.HSB1
unknown pnpinfo _HID=PNP0C32 _UID=2 at handle=\_SB_.HSB2
unknown pnpinfo _HID=TOS1900 _UID=0 at handle=\_SB_.VALZ
unknown pnpinfo _HID=TOS1901 _UID=0 at handle=\_SB_.FWEX
acpi_button0 pnpinfo _HID=PNP0C0C _UID=0 at handle=\_SB_.PWRB
acpi_lid0 pnpinfo _HID=PNP0C0D _UID=0 at handle=\_SB_.LID0
acpi_acad0 pnpinfo _HID=ACPI0003 _UID=0 at handle=\_SB_.ADP0
battery0 pnpinfo _HID=PNP0C0A _UID=1 at handle=\_SB_.BAT0
unknown pnpinfo _HID=TOS6205 _UID=0 at handle=\_SB_.BT__
pcib0 pnpinfo _HID=PNP0A08 _UID=0 at handle=\_SB_.PCI0
pci0
I/O ports:
0x4000-0x401f
0x4100-0x4107
0x4108-0x410f
0x4110-0x4117
0x4118-0x411b
0x411c-0x411f
I/O memory addresses:
0xd2500000-0xd25fffff
0xd4600000-0xd4603fff
0xd4606000-0xd46060ff
hostb0 pnpinfo vendor=0x8086 device=0x2a40 subvendor=0x1179 subdevice=0xff66 class=0x060000 at slot=0 function=0
vgapci0 pnpinfo vendor=0x8086 device=0x2a42 subvendor=0x1179 subdevice=0xff67 class=0x030000 at slot=2 function=0 handle=\_SB_.PCI0.OVGA
I/O memory addresses:
0xc0000000-0xcfffffff
0xd0000000-0xd03fffff
agp0
drm0
vgapci1 pnpinfo vendor=0x8086 device=0x2a43 subvendor=0x1179 subdevice=0xff67 class=0x038000 at slot=2 function=1
drm1
uhci0 pnpinfo vendor=0x8086 device=0x2937 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=26 function=0 handle=\_SB_.PCI0.UHC4
Interrupt request lines:
16
I/O ports:
0x40e0-0x40ff
usbus0
uhub0
uhci1 pnpinfo vendor=0x8086 device=0x2938 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=26 function=1 handle=\_SB_.PCI0.UHC5
Interrupt request lines:
21
I/O ports:
0x40c0-0x40df
usbus1
uhub1
ehci0 pnpinfo vendor=0x8086 device=0x293c subvendor=0x1179 subdevice=0xff66 class=0x0c0320 at slot=26 function=7 handle=\_SB_.PCI0.EHII
Interrupt request lines:
19
I/O memory addresses:
0xd4605c00-0xd4605fff
usbus2
uhub2
unknown pnpinfo vendor=0x8086 device=0x293e subvendor=0x1179 subdevice=0xff66 class=0x040300 at slot=27 function=0 handle=\_SB_.PCI0.AZAL
pcib1 pnpinfo vendor=0x8086 device=0x2940 subvendor=0x1179 subdevice=0xff66 class=0x060400 at slot=28 function=0 handle=\_SB_.PCI0.EXP1
pci2
I/O ports:
0x2000-0x20ff
I/O memory addresses:
0xd0400000-0xd040ffff
re0 pnpinfo vendor=0x10ec device=0x8136 subvendor=0x1179 subdevice=0xff66 class=0x020000 at slot=0 function=0 handle=\_SB_.PCI0.EXP1.PXS1
Interrupt request lines:
256
pcib2 pnpinfo vendor=0x8086 device=0x2948 subvendor=0x1179 subdevice=0xff66 class=0x060400 at slot=28 function=4 handle=\_SB_.PCI0.EXP5
pci6
uhci2 pnpinfo vendor=0x8086 device=0x2934 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=29 function=0 handle=\_SB_.PCI0.UHC1
Interrupt request lines:
23
I/O ports:
0x40a0-0x40bf
usbus3
uhub3
uhci3 pnpinfo vendor=0x8086 device=0x2935 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=29 function=1 handle=\_SB_.PCI0.UHC2
Interrupt request lines:
19
I/O ports:
0x4080-0x409f
usbus4
uhub4
ums0 pnpinfo vendor=0x046d product=0xc50a devclass=0x00 devsubclass=0x00 sernum="" release=0x2010 intclass=0x03 intsubclass=0x01 at port=1 interface=0
uhci4 pnpinfo vendor=0x8086 device=0x2936 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=29 function=2 handle=\_SB_.PCI0.UHC3
Interrupt request lines:
16
I/O ports:
0x4060-0x407f
usbus5
uhub5
uhci5 pnpinfo vendor=0x8086 device=0x2939 subvendor=0x1179 subdevice=0xff66 class=0x0c0300 at slot=29 function=3
Interrupt request lines:
18
I/O ports:
0x4040-0x405f
usbus6
uhub6
ehci1 pnpinfo vendor=0x8086 device=0x293a subvendor=0x1179 subdevice=0xff66 class=0x0c0320 at slot=29 function=7 handle=\_SB_.PCI0.ECHI
Interrupt request lines:
23
I/O memory addresses:
0xd4605800-0xd4605bff
usbus7
uhub7
axe0 pnpinfo vendor=0x0b95 product=0x7720 devclass=0xff devsubclass=0xff sernum="" release=0x0001 intclass=0xff intsubclass=0xff at port=2 interface=0
miibus0
ukphy0 pnpinfo oui=0xec6 model=0x1 rev=0x1 at phyno=16
pcib3 pnpinfo vendor=0x8086 device=0x2448 subvendor=0x1179 subdevice=0xff66 class=0x060401 at slot=30 function=0 handle=\_SB_.PCI0.P32_
pci3
isab0 pnpinfo vendor=0x8086 device=0x2919 subvendor=0x1179 subdevice=0xff66 class=0x060100 at slot=31 function=0 handle=\_SB_.PCI0.LPC_
isa0
orm0
I/O memory addresses:
0xd0000-0xd0fff
sc0
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
fdc0
ppc0
uart0
uart1
atapci0 pnpinfo vendor=0x8086 device=0x2929 subvendor=0x1179 subdevice=0xff66 class=0x010601 at slot=31 function=2 handle=\_SB_.PCI0.SAT0
Interrupt request lines:
19
I/O ports:
0x4020-0x403f
I/O memory addresses:
0xd4605000-0xd46057ff
ata2
ad4
subdisk4
ata3
ata4
ata5
acd0
unknown pnpinfo vendor=0x8086 device=0x2930 subvendor=0x1179 subdevice=0xff66 class=0x0c0500 at slot=31 function=3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.OVGA.DD01
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.OVGA.DD02
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.OVGA.DD03
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.OVGA.DD04
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.OVGA.DD05
pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.PCI0.LPC_.LNKA
pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.PCI0.LPC_.LNKB
pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.PCI0.LPC_.LNKC
pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.PCI0.LPC_.LNKD
pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.PCI0.LPC_.LNKE
pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.PCI0.LPC_.LNKF
pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.PCI0.LPC_.LNKG
pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.PCI0.LPC_.LNKH
acpi_sysresource0 pnpinfo _HID=PNP0C02 _UID=0 at handle=\_SB_.PCI0.LPC_.SYSR
atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.LPC_.DMAC
atrtc0 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.LPC_.RTC_
Interrupt request lines:
8
unknown pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.LPC_.HPET
unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.LPC_.PIC_
fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.LPC_.FPU_
attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.LPC_.TIMR
atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.LPC_.KBC_
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
Interrupt request lines:
12
psmcpnp0 pnpinfo _HID=SYN1913 _UID=0 at handle=\_SB_.PCI0.LPC_.MOUE
unknown pnpinfo _HID=WEC1020 _UID=0 at handle=\_SB_.PCI0.LPC_.WCIR
acpi_ec0 pnpinfo _HID=PNP0C09 _UID=0 at handle=\_SB_.PCI0.LPC_.EC0_
I/O ports:
0x62
0x66
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP2
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP2.PXS2
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP3.PXS3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP4.PXS4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP5.PXS5
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP6
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.EXP6.PXS6
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PEGP
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PEGP.VGA_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PEGP.VGA_.CRT_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PEGP.VGA_.LCD_
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PEGP.VGA_.TV__
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.LOC4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.CHA4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.CHA4.ESTA
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.PRID
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.PRID.P_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.PRID.P_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.SECD
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.SECD.S_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT0.SECD.S_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.PRID
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.PRID.P_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.PRID.P_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.SECD
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.SECD.S_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SAT1.SECD.S_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN00
unknown pnpinfo _HID=PNP0C0B _UID=0 at handle=\_TZ_.FAN_
acpi_tz0 pnpinfo _HID=none _UID=0 at handle=\_TZ_.THRM
acpi_hpet0 pnpinfo unknown at unknown
I/O memory addresses:
0xfed00000-0xfed003ff
acpi_timer0 pnpinfo unknown at unknown
ACPI I/O ports:
0x408-0x40b
[-- Attachment #3 --]
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Thu Oct 22 01:15:25 EDT 2009
dmmiller@:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 900 @ 2.20GHz (2194.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x400e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3960070144 (3776 MB)
ACPI APIC Table: <TOSINV TOSINV00>
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <TOSINV TOSINV00> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4110-0x4117 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 131068k stolen memory
vgapci1: <VGA-compatible display> mem 0xd2500000-0xd25fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x40e0-0x40ff irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x3f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x40c0-0x40df irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4605c00-0xd4605fff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus2: waiting for BIOS to give up control
usbus2: timed out waiting for BIOS
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0410000-0xd0410fff,0xd0400000-0xd040ffff irq 16 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x34800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x34c00000
device_attach: re0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib2
uhci2: <Intel 82801I (ICH9) USB controller> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x4080-0x409f irq 19 at device 29.1 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x4060-0x407f irq 16 at device 29.2 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x4040-0x405f irq 18 at device 29.3 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4605800-0xd4605bff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0x4108-0x410f,0x411c-0x411f,0x4100-0x4107,0x4118-0x411b,0x4020-0x403f mem 0xd4605000-0xd46057ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounter "TSC" frequency 2194511649 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 152627MB <Hitachi HTS543216L9SA00 FB2OC43C> at ata2-master SATA150
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
acd0: DVDR <TSSTcorp CDDVDW TS-L633A/TO03> at ata5-master SATA150
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 4 ports with 4 removable, self powered
uhub7: 8 ports with 8 removable, self powered
ugen7.2: <vendor 0x0b95> at usbus7
axe0: <vendor 0x0b95 product 0x7720, rev 2.00/0.01, addr 2> on usbus7
axe0: PHYADDR 0xe0:0x10
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 00:50:b6:05:fc:04
ugen7.3: <vendor 0x0bda> at usbus7
ugen4.2: <Logitech> at usbus4
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/20.10, addr 2> on usbus4
ums0: 16 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/ad4s1a
lock order reversal: (sleepable after non-sleepable)
1st 0xffffff0003d400a8 rtentry (rtentry) @ /usr/src/sys/net/route.c:1474
2nd 0xffffffff80e03880 ifnet_sx (ifnet_sx) @ /usr/src/sys/netinet/sctp_bsd_addr.c:212
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x32
_witness_debugger() at _witness_debugger+0x2b
witness_checkorder() at witness_checkorder+0x8c7
_sx_slock() at _sx_slock+0x85
sctp_init_ifns_for_vrf() at sctp_init_ifns_for_vrf+0x31
sctp_addr_change() at sctp_addr_change+0x38
rt_newaddrmsg() at rt_newaddrmsg+0x62
rtinit() at rtinit+0x35c
in_ifinit() at in_ifinit+0x8ac
in_control() at in_control+0xc5b
ifioctl() at ifioctl+0x140f
soo_ioctl() at soo_ioctl+0x3e2
kern_ioctl() at kern_ioctl+0x1f7
ioctl() at ioctl+0x169
syscall() at syscall+0x2f6
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (54, FreeBSD ELF64, ioctl), rip = 0x800b85e6c, rsp = 0x7fffffffe4d8, rbp = 0x4176c0 ---
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 0 1 0 0 done
All buffers synced.
lock order reversal:
1st 0xffffff00036cf7f8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1200
2nd 0xffffff0003caf448 devfs (devfs) @ /usr/src/sys/ufs/ffs/ffs_vfsops.c:1194
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x32
_witness_debugger() at _witness_debugger+0x2b
witness_checkorder() at witness_checkorder+0x8c7
__lockmgr_args() at __lockmgr_args+0x7bf
vop_stdlock() at vop_stdlock+0x51
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xc5
_vn_lock() at _vn_lock+0x74
ffs_flushfiles() at ffs_flushfiles+0x96
softdep_flushfiles() at softdep_flushfiles+0x35
ffs_unmount() at ffs_unmount+0x127
dounmount() at dounmount+0x40f
vfs_unmountall() at vfs_unmountall+0x53
boot() at boot+0x468
reboot() at reboot+0x60
syscall() at syscall+0x2f6
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (55, FreeBSD ELF64, reboot), rip = 0x800790b6c, rsp = 0x7fffffffeb98, rbp = 0 ---
Uptime: 28m59s
Rebooting...
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Thu Oct 22 01:15:25 EDT 2009
dmmiller@:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81028000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2194514696 Hz
CPU: Intel(R) Celeron(R) CPU 900 @ 2.20GHz (2194.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x400e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000001057000 - 0x00000000ae4eefff, 2907275264 bytes (709784 pages)
0x00000000b7bbf000 - 0x00000000b7c85fff, 815104 bytes (199 pages)
0x00000000b7cbf000 - 0x00000000b7cebfff, 184320 bytes (45 pages)
0x00000000b7cff000 - 0x00000000b7cfffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 3960070144 (3776 MB)
ACPI APIC Table: <TOSINV TOSINV00>
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu 0
ACPI: RSDP 0xfe020 00024 (v2 TOSINV)
ACPI: XSDT 0xb7cfe120 0006C (v1 TOSINV TOSINV00 00000001 01000013)
ACPI: FACP 0xb7cfd000 000F4 (v4 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: DSDT 0xb7cf0000 08F1A (v1 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: FACS 0xb7c93000 00040
ACPI: HPET 0xb7cfc000 00038 (v1 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: APIC 0xb7cfb000 0006C (v2 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: MCFG 0xb7cfa000 0003C (v1 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: ASF! 0xb7cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SLIC 0xb7cef000 00176 (v1 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: BOOT 0xb7cee000 00028 (v1 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SSDT 0xb7ced000 00537 (v1 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xb7cec000 00655 (v1 PmRef CpuPm 00003000 INTL 20051117)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <TOSINV TOSINV00> on motherboard
PCIe: Memory Mapped configuration base @ 0xf8000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 9 10 11 12
Validation 0 5 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12
Validation 0 255 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12
Validation 0 10 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12
Validation 0 11 N 0 3 4 5 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 7 9 10 11 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a42, revid=0x07
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled
map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
map[20]: type I/O Port, range 32, base 0x4110, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a43, revid=0x07
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xd2500000, size 20, enabled
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x40e0, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x40c0, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd4605c00, size 10, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd4605c00
ehci early: SMM active, request owner change
ehci early: SMM does not respond
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd4600000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2948, revid=0x03
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2939, revid=0x03
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd4605800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd4605800
ehci early: SMM active, request owner change
ehci early: SMM does not respond
found-> vendor=0x8086, dev=0x2448, revid=0x93
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2919, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2929, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x4108, size 3, enabled
map[14]: type I/O Port, range 32, base 0x411c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x4100, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x4118, size 2, enabled
map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled
map[24]: type Memory, range 32, base 0xd4605000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 64, base 0xd4606000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x4000, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0x4110-0x4117 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000
vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: aperture size is 256M, detected 131068k stolen memory
vgapci1: <VGA-compatible display> mem 0xd2500000-0xd25fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x40e0-0x40ff irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40e0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x3f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x40c0-0x40df irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40c0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4605c00-0xd4605fff irq 19 at device 26.7 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: waiting for BIOS to give up control
usbus2: timed out waiting for BIOS
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x2000-0x3fff
pcib1: memory decode 0xd3600000-0xd45fffff
pcib1: prefetched decode 0xd0400000-0xd14fffff
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8136, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
map[18]: type Prefetchable Memory, range 64, base 0xd0410000, size 12, enabled
pcib1: requested memory range 0xd0410000-0xd0410fff: good
map[20]: type Prefetchable Memory, range 64, base 0xd0400000, size 16, enabled
pcib1: requested memory range 0xd0400000-0xd040ffff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd0410000-0xd0410fff,0xd0400000-0xd040ffff irq 16 at device 0.0 on pci2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd0410000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x34800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x34c00000
device_attach: re0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib2: domain 0
pcib2: secondary bus 6
pcib2: subordinate bus 7
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci6: <ACPI PCI bus> on pcib2
pci6: domain=0, physical bus=6
uhci2: <Intel 82801I (ICH9) USB controller> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x4080-0x409f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x4060-0x407f irq 16 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x4040-0x405f irq 18 at device 29.3 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4605800-0xd4605bff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel (ID=29298086) AHCI controller> port 0x4108-0x410f,0x411c-0x411f,0x4100-0x4107,0x4118-0x411b,0x4020-0x403f mem 0xd4605000-0xd46057ff irq 19 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd4605000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported
atapci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM eSATA 4ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=10ms status=00000113
ata2: ready wait time=53ms
ata2: software reset port 15...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect timeout status=00000004
ata3: AHCI reset done: phy reset found no device
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect timeout status=00000004
ata4: AHCI reset done: phy reset found no device
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect time=10ms status=00000113
ata5: ready wait time=1ms
ata5: software reset port 15...
ata5: ready wait time=0ms
ata5: SIGNATURE: eb140101
ata5: AHCI reset done: devices=00010000
ata5: [MPSAFE]
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
Calling int 0x15 (ax=0xc000 bx=0x0000 cx=0x0000 dx=0x0000 es=0x0000 di=0x0000)
Exiting int 0x15 (ax=0x0000 bx=0xe820 cx=0x0000 dx=0x0000 es=0xf000 di=0x0000)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 55
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi0: wakeup code va 0xffffff8072134000 pa 0x4000
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 249241 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750670 hz
Timecounter "TSC" frequency 2194514696 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 152627MB <Hitachi HTS543216L9SA00 FB2OC43C> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00010000
ata5: New devices: 00010000
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ata5: device_reset timeout=260us
acd0: <TSSTcorp CDDVDW TS-L633A/TO03> DVDR drive at ata5 as master
acd0: read 1378KB/s (4133KB/s) write 172KB/s (4133KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
uhub2: 4 ports with 4 removable, self powered
uhub7: 8 ports with 8 removable, self powered
ugen7.2: <vendor 0x0b95> at usbus7
axe0: <vendor 0x0b95 product 0x7720, rev 2.00/0.01, addr 2> on usbus7
axe0: PHYADDR 0xe0:0x10
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0: OUI 0x000ec6, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: bpf attached
ue0: Ethernet address: 00:50:b6:05:fc:04
ugen7.3: <vendor 0x0bda> at usbus7
ugen4.2: <Logitech> at usbus4
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/20.10, addr 2> on usbus4
ums0: 16 buttons and [XYZ] coordinates ID=0
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2009-10-23 03:36:08]) = 1256268968.000000000
start_init: trying /sbin/init
lock order reversal: (sleepable after non-sleepable)
1st 0xffffff0003d300a8 rtentry (rtentry) @ /usr/src/sys/net/route.c:1474
2nd 0xffffffff80e03880 ifnet_sx (ifnet_sx) @ /usr/src/sys/netinet/sctp_bsd_addr.c:212
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x32
_witness_debugger() at _witness_debugger+0x2b
witness_checkorder() at witness_checkorder+0x8c7
_sx_slock() at _sx_slock+0x85
sctp_init_ifns_for_vrf() at sctp_init_ifns_for_vrf+0x31
sctp_addr_change() at sctp_addr_change+0x38
rt_newaddrmsg() at rt_newaddrmsg+0x62
rtinit() at rtinit+0x35c
in_ifinit() at in_ifinit+0x8ac
in_control() at in_control+0xc5b
ifioctl() at ifioctl+0x140f
soo_ioctl() at soo_ioctl+0x3e2
kern_ioctl() at kern_ioctl+0x1f7
ioctl() at ioctl+0x169
syscall() at syscall+0x2f6
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (54, FreeBSD ELF64, ioctl), rip = 0x800b85e6c, rsp = 0x7fffffffe4d8, rbp = 0x4176c0 ---
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 56
vgapci0: using IRQ 256 for MSI
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xc0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [MPSAFE]
drm0: [ITHREAD]
drm0: [MPSAFE]
drm0: [ITHREAD]
[-- Attachment #4 --]
hostb0@pci0:0:0:0: class=0x060000 card=0xff661179 chip=0x2a408086 rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile Memory Controller Hub'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0xff671179 chip=0x2a428086 rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel Mobile Graphic (Mobile Intel 4 Series Chipset Family)'
class = display
subclass = VGA
vgapci1@pci0:0:2:1: class=0x038000 card=0xff671179 chip=0x2a438086 rev=0x07 hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel Mobile Graphic (Mobile Intel 4 Series Chipset Family)'
class = display
uhci0@pci0:0:26:0: class=0x0c0300 card=0xff661179 chip=0x29378086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0xff661179 chip=0x29388086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0xff661179 chip=0x293c8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
none0@pci0:0:27:0: class=0x040300 card=0xff661179 chip=0x293e8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) HD Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0xff661179 chip=0x29408086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:4: class=0x060400 card=0xff661179 chip=0x29488086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5'
class = bridge
subclass = PCI-PCI
uhci2@pci0:0:29:0: class=0x0c0300 card=0xff661179 chip=0x29348086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:1: class=0x0c0300 card=0xff661179 chip=0x29358086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci4@pci0:0:29:2: class=0x0c0300 card=0xff661179 chip=0x29368086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci5@pci0:0:29:3: class=0x0c0300 card=0xff661179 chip=0x29398086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0xff661179 chip=0x293a8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib3@pci0:0:30:0: class=0x060401 card=0xff661179 chip=0x24488086 rev=0x93 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0xff661179 chip=0x29198086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH9M LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:2: class=0x010601 card=0xff661179 chip=0x29298086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) Mobile SATA AHCI Controller'
class = mass storage
subclass = SATA
none1@pci0:0:31:3: class=0x0c0500 card=0xff661179 chip=0x29308086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) SMBus Controller'
class = serial bus
subclass = SMBus
re0@pci0:2:0:0: class=0x020000 card=0xff661179 chip=0x813610ec rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8100E/RTL8101E/RTL8102E-GR (RTL8100-8101E-8102E-PCIEXPRESS)'
class = network
subclass = ethernet
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39705.24155.qm>