From owner-freebsd-scsi@FreeBSD.ORG Mon Aug 17 11:07:03 2009 Return-Path: Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6272F10656C8 for ; Mon, 17 Aug 2009 11:07:03 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 4743D8FC6D for ; Mon, 17 Aug 2009 11:07:03 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id n7HB731t075939 for ; Mon, 17 Aug 2009 11:07:03 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id n7HB722E075935 for freebsd-scsi@FreeBSD.org; Mon, 17 Aug 2009 11:07:02 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 17 Aug 2009 11:07:02 GMT Message-Id: <200908171107.n7HB722E075935@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Aug 2009 11:07:03 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/136718 scsi [ciss] ciss driver issue on HP DL585 o kern/134488 scsi [mpt] MPT SCSI driver probes max. 8 LUNs per device o amd64/132394 scsi [isp] - bad underruns with QLogic qla2300 and amd64 o kern/132250 scsi [ciss] ciss driver does not support more then 15 drive o kern/132206 scsi [mpt] system panics on boot when mirroring and 2nd dri o kern/131032 scsi [panic] hald causing panic in scsi_sg o kern/130735 scsi [cam] [patch] pass M_NOWAIT to the malloc() call insid o kern/130621 scsi [mpt] tranfer rate is inscrutable slow when use lsi213 o kern/129602 scsi [ahd] ahd(4) gets confused and wedges SCSI bus o kern/128452 scsi [sa] [panic] Accessing SCSI tape drive randomly crashe o kern/128245 scsi [scsi] "inquiry data fails comparison at DV1 step" [re o kern/127927 scsi [isp] isp(4) target driver crashes kernel when set up o kern/126866 scsi [isp] [panic] kernel panic on card initialization o kern/124667 scsi [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi o kern/123674 scsi [ahc] ahc driver dumping o kern/123666 scsi [aac] attach fails with Adaptec SAS RAID 3805 controll o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc o kern/120487 scsi [sg] scsi_sg incompatible with scanners o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s o kern/119668 scsi [cam] [patch] certain errors are too verbose comparing o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression] o kern/94838 scsi Kernel panic while mounting SD card with lock switch o o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load o kern/60598 scsi wire down of scsi devices conflicts with config s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/40895 scsi wierd kernel / device driver bug o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/38828 scsi [dpt] [request] DPT PM2012B/90 doesn't work o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce 38 problems total. From owner-freebsd-scsi@FreeBSD.ORG Fri Aug 21 16:35:06 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BC00C106568C for ; Fri, 21 Aug 2009 16:35:06 +0000 (UTC) (envelope-from gdoe6545@yahoo.it) Received: from smtp135.mail.ukl.yahoo.com (smtp135.mail.ukl.yahoo.com [77.238.184.66]) by mx1.freebsd.org (Postfix) with SMTP id 236F08FC0C for ; Fri, 21 Aug 2009 16:35:05 +0000 (UTC) Received: (qmail 2309 invoked from network); 21 Aug 2009 16:08:24 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.it; h=Received:X-Yahoo-SMTP:X-YMail-OSG:X-Yahoo-Newman-Property:Message-Id:From:To:Content-Type:Content-Transfer-Encoding:Mime-Version:Subject:Date:X-Mailer; b=f40ECQSs0e59gzDgYPwv4l13TkM1sCFWOBvE2ZOVaMtGp9exv+HBbbGnJawX22yxZJxhrgRtN40LkrSgNt7L4k2KuMMobzbUqXT6Y791mTZ1s8Pi3NfpLAYbKu3rFktQYODDnrZW0mNVo5qWaq+2Oc8G/tguqcryBbRas8Q0VeU= ; Received: from unknown (HELO zao.smersh.casa) (gdoe6545@81.174.13.193 with plain) by smtp135.mail.ukl.yahoo.com with SMTP; 21 Aug 2009 16:08:23 -0000 X-Yahoo-SMTP: 0MfwSvOswBCS0hiRYuR.aU4fZEzj X-YMail-OSG: JCBWFqQVM1nY9ia3Ke408hL_RX8zgpCnBsNCYPHLE7_ct7Qp75qTgf1sbtz9of1dyxhCoI1HkZkmrVUtQ3heJYr_ttezMYIlppdnfsVSuVH3TKGmKkDOqXlNilIO5rVeSHGAEhhn_XFNCNfiydEhTHNW8hCyxQfAKg7Z_gnqZsqWOhrUFQMcFi3vqzXi9KN7d.DsfKqUkeBlVSJh5r.c_w6Pw3OonBs2t.3YDmIN6bQWaJcqi1CF8On2TozqO9O7LK9LQ977hlHy8SDqHZ9.bolXmw_jkgy2YQNBi1JqUxq4a_j_km8n7QCIGMv1HD3.3.pHk_Y5gLmnWZacBLMe0ghg X-Yahoo-Newman-Property: ymail-3 Message-Id: From: Gianni To: freebsd-scsi@freebsd.org Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v936) Date: Fri, 21 Aug 2009 18:08:20 +0200 X-Mailer: Apple Mail (2.936) Subject: mpt problems on RAID re-sync X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 21 Aug 2009 16:35:06 -0000 I'm trying to rebuild an mpt raid 1 array, at first the system kept panicking when the new disk was inserted, I upgraded from 7.1 to 7.2 which fixed that problem. The problem now is that the rebuild gets so far and then I get the following: mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 156988075 of 286310400 blocks remaining mpt0: IOC Generated Bus Reset Port: 0 (mpt0:vol0:1): Physical Disk Status Changed mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled ) (mpt0:vol0:1): No longer configured Any ideas what could be causing this, is it likely to be a hardware issue or driver related? Full dmesg below. -Gianni Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-STABLE #3: Thu Aug 20 17:43:50 CEST 2009 root@neptune.proiv-solutions.com:/usr/obj/usr/src/sys/NEPTUNE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2822.51-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features = 0xbfebfbff < FPU ,VME ,DE ,PSE ,TSC ,MSR ,PAE ,MCE ,CX8 ,APIC ,SEP ,MTRR ,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d AMD Features=0x20100800 TSC: P-state invariant Logical CPUs per core: 2 usable memory = 2135527424 (2036 MB) avail memory = 2059137024 (1963 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP/HT): APIC ID: 7 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard kbd1 at kbdmux0 cryptosoft0: on motherboard acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.1 (no driver attached) pcib1: irq 16 at device 2.0 on pci0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 pcib3: at device 0.2 on pci1 pci3: on pcib3 mpt0: port 0x2000-0x20ff mem 0xdd210000-0xdd21ffff,0xdd200000-0xdd20ffff irq 18 at device 5.0 on pci3 mpt0: [ITHREAD] mpt0: MPI Version=1.2.12.0 mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE ) mpt0: 1 Active Volume (1 Max) mpt0: 2 Hidden Drive Members (6 Max) em0: port 0x2400-0x243f mem 0xdd220000-0xdd23ffff irq 16 at device 6.0 on pci3 em0: [FILTER] em0: Ethernet address: 00:0a:e4:13:e1:dc em1: port 0x2440-0x247f mem 0xdd280000-0xdd29ffff,0xdd240000-0xdd27ffff irq 17 at device 6.1 on pci3 em1: [FILTER] em1: Ethernet address: 00:0a:e4:13:e1:dd uhci0: port 0x1400-0x141f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1420-0x143f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xdd001000-0xdd0013ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 4 ports with 4 removable, self powered pcib4: at device 30.0 on pci0 pci4: on pcib4 vgapci0: port 0x3000-0x30ff mem 0xde000000-0xdeffffff,0xdd300000-0xdd300fff irq 16 at device 1.0 on pci4 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 31.1 on pci0 ata0: on atapci0 ata0: [ITHREAD] ata1: on atapci0 ata1: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 cpu0: on acpi0 p4tcc0: on cpu0 cpu1: on acpi0 p4tcc1: on cpu1 cpu2: on acpi0 p4tcc2: on cpu2 cpu3: on acpi0 p4tcc3: on cpu3 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff, 0xdc000-0xdffff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. Waiting 5 seconds for SCSI devices to settle mpt0: Volume(0:0): Volume Status Changed mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares ) mpt0:vol0(mpt0:0:0): Using Spare Pool: 0 mpt0:vol0(mpt0:0:0): 2 Members: (mpt0:1:0:0): Primary Online (mpt0:1:1:0): Secondary Out of Sync Online mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled ) (mpt0:vol0:0): Physical (mpt0:0:0:0), Pass-thru (mpt0:1:0:0) (mpt0:vol0:0): Online (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:1:0) (mpt0:vol0:1): Online (mpt0:vol0:1): Status ( Out-Of-Sync ) acd0: DVDROM at ata0-master UDMA33 mpt0:vol0(mpt0:0:0): Volume Status Changed mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 285959992 of 286310400 blocks remaining (probe0:mpt0:0:8:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:8:0): CAM Status: SCSI Status Error (probe0:mpt0:0:8:0): SCSI Status: Check Condition (probe0:mpt0:0:8:0): UNIT ATTENTION asc:29,0 (probe0:mpt0:0:8:0): Power on, reset, or bus device reset occurred (probe0:mpt0:0:8:0): Retrying Command (per Sense Data) ses0 at mpt0 bus 0 target 8 lun 0 ses0: Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at mpt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit) da0: Command Queueing Enabled da0: 139800MB (286310400 512 byte sectors: 255H 63S/T 17821C) SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/da0s1a mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 277264363 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 267855403 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 258577387 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 249307819 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 239962219 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 230796139 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 221505451 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 212263339 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 202926187 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 193658731 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 184629931 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 175632811 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 166314667 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 161750635 of 286310400 blocks remaining mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled Re-Syncing ) mpt0:vol0(mpt0:0:0): Low Priority Re-Sync mpt0:vol0(mpt0:0:0): 156988075 of 286310400 blocks remaining mpt0: IOC Generated Bus Reset Port: 0 (mpt0:vol0:1): Physical Disk Status Changed mpt0:vol0(mpt0:0:0): RAID-1 - Degraded mpt0:vol0(mpt0:0:0): Status ( Enabled ) (mpt0:vol0:1): No longer configured