From owner-freebsd-sparc64@FreeBSD.ORG Mon May 4 11:08:06 2009 Return-Path: Delivered-To: freebsd-sparc64@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 46FC910656A9 for ; Mon, 4 May 2009 11:08:06 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 32F268FC0C for ; Mon, 4 May 2009 11:08:06 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id n44B86jT098879 for ; Mon, 4 May 2009 11:08:06 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id n44B84kL098872 for freebsd-sparc64@FreeBSD.org; Mon, 4 May 2009 11:08:04 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 4 May 2009 11:08:04 GMT Message-Id: <200905041108.n44B84kL098872@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-sparc64@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-sparc64@FreeBSD.org X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 May 2009 11:08:06 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- f sparc/127051 sparc64 [hme] hme interfaces "pause" with the message "device o sparc/119244 sparc64 X11Forwarding to X11 server on sparc crashes Xorg o sparc/119240 sparc64 top has WCPU over 100% on UP system s sparc/119239 sparc64 gdb coredumps on sparc64 o sparc/119017 sparc64 [install] 7.0 Beta won't install on U60 o sparc/113556 sparc64 [panic] trap: memory address not aligned; Rebooting... f sparc/108732 sparc64 ping(8) reports 14 digit time on sparc64 s sparc/107087 sparc64 [hang] system is hung during boot from CD o sparc/105048 sparc64 [trm] trm(4) panics on sparc64 o sparc/104428 sparc64 [nullfs] nullfs panics on E4500 (but not E420) o sparc/80890 sparc64 [panic] kmem_malloc(73728): kmem_map too small running o sparc/80410 sparc64 [netgraph] netgraph is causing crash with mpd on sparc o sparc/71729 sparc64 printf in kernel thread causes panic on SPARC 13 problems total. From owner-freebsd-sparc64@FreeBSD.ORG Mon May 4 13:49:24 2009 Return-Path: Delivered-To: freebsd-sparc@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7BFA9106566C for ; Mon, 4 May 2009 13:49:24 +0000 (UTC) (envelope-from hannula@gmail.com) Received: from mail-ew0-f171.google.com (mail-ew0-f171.google.com [209.85.219.171]) by mx1.freebsd.org (Postfix) with ESMTP id A70188FC12 for ; Mon, 4 May 2009 13:49:23 +0000 (UTC) (envelope-from hannula@gmail.com) Received: by ewy19 with SMTP id 19so3736214ewy.43 for ; Mon, 04 May 2009 06:49:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:date:message-id:subject :from:to:content-type:content-transfer-encoding; bh=7zZqQlk3tmb6vjUbNKj8rBNn9Le77HfJvZ6YOn/av2U=; b=sHH9wcemQE6LbA7dexEudp2u4+VnEjc4BurG273I+Jtr+seZJf98FQA/SJGn2mZNe1 EJlVhOqFOfTA+gVn7K8ovX3LI9rFmVYxcG6cbVk7QEtRshw/ilmDfU8nAhbXLZEtEJBn HkhMY2xANyywedV4eEpaVbcIpSa9VsB+ltiPw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type :content-transfer-encoding; b=N+InzwAmwtmylSrjnN11BI/k4SHCjVTjDczre0NIT7UiDKu+xtSmlRyCTMWsb5IjKd aqO/4ET5fVmsJsq6skP+k+WzpMTYLT9c2htqPHg8FceHqUC39zPRy0O0BaedNi1Ltg6w yAnkmhQE//nQCO8wEDhPMvBmQfAbAmq4w8CdA= MIME-Version: 1.0 Received: by 10.210.143.9 with SMTP id q9mr2770551ebd.73.1241443404164; Mon, 04 May 2009 06:23:24 -0700 (PDT) Date: Mon, 4 May 2009 16:23:24 +0300 Message-ID: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> From: Olev To: freebsd-sparc@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Subject: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 May 2009 13:49:24 -0000 As it is not listed in supported systems I gave it a shot. Installs ok. Onboard ethernet not working. The machine I tested it on has 2x PCI SCSI cards inside and it finds them too. Verbose dmesg below: Sun Fire 480R, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.34, 4096 MB memory installed, Serial #53044977. Ethernet address 0:3:ba:29:66:f1, Host ID: 832966f1. Rebooting with command: boot Boot device: disk File and args: >> FreeBSD/sparc64 boot block Boot path: /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a Boot loader: /boot/loader Consoles: Open Firmware console Booting with sun4u support. FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@obrian.cse.buffalo.edu, Fri May 1 14:51:37 UTC 2009) bootpath="/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x7c0348+0x78d48 syms=[0x8+0x823e0+0x8+0x70aa3] / Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 8 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v jumping to kernel entry at 0xc0078000. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Sat May 2 08:25:23 UTC 2009 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000. real memory = 4294967296 (4096 MB) avail memory = 4174045184 (3980 MB) machine: SUNW,Sun-Fire-480R cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x23 maxtl=5 maxwin=7 initalizing intr_countp cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x23 maxtl=5 maxwin=7 INTR: Adding CPU 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs wlan: <802.11 Link Layer> firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc05fd180 registered firmware set firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc060202e registered firmware set firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc06079ce registered firmware set firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc060fa7c registered firmware set firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc06174f2 registered firmware set firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc06213b6 registered firmware set firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0628148 registered firmware set firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc0631fe4 registered firmware set firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0644bc6 registered firmware set firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0657964 registered firmware set firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc06713da registered firmware set firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc068ef94 registered firmware set random: kbd0 at kbdmux0 nfslock: pseudo-device mem: null: openfirm: nexus0: nexus0: mem 0x40000400000-0x40000400047 type memory-controller (no driver attached) nexus0: mem 0x40001400000-0x40001400047 type memory-controller (no driver attached) pcib0: mem 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f,0x7ffee000000-0x7ffee0000ff irq 563,560,561,564,565 on nexus0 pcib0: Schizo, version 4, IGN 0x8, bus B, 33MHz pcib0: DVMA map: 0xc0000000 to 0xffffffff pcib0: bus range 0 to 0; PCI bus 0 pcib0: [FILTER] pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x100000, size 8, enabled map[18]: type Memory, range 32, base 0x102000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=3, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=b, irq=255 map[10]: type I/O Port, range 32, base 0x400, size 8, port disabled map[14]: type Memory, range 32, base 0x104000, size 8, enabled map[18]: type Memory, range 32, base 0x106000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type I/O Port, range 32, base 0x500, size 8, port disabled map[14]: type Memory, range 32, base 0x108000, size 8, enabled map[18]: type Memory, range 32, base 0x10a000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=4, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=b, irq=255 map[10]: type I/O Port, range 32, base 0x600, size 8, port disabled map[14]: type Memory, range 32, base 0x10c000, size 8, enabled map[18]: type Memory, range 32, base 0x10e000, size 12, enabled found-> vendor=0x1095, dev=0x0646, revid=0x07 domain=0, bus=0, slot=6, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x700, size 3, port disabled map[14]: type I/O Port, range 32, base 0x718, size 2, enabled map[18]: type I/O Port, range 32, base 0x710, size 3, enabled map[1c]: type I/O Port, range 32, base 0x708, size 2, enabled map[20]: type I/O Port, range 32, base 0x720, size 4, enabled sym0: <875> port 0x300-0x3ff mem 0x100000-0x1000ff,0x102000-0x102fff at device 3.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x100000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x102000 sym0: chip clock is 40218KHz sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [MPSAFE] sym0: [ITHREAD] sym1: <875> port 0x400-0x4ff mem 0x104000-0x1040ff,0x106000-0x106fff at device 3.1 on pci0 sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x104000 sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x106000 sym1: chip clock is 40218KHz sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: [MPSAFE] sym1: [ITHREAD] sym2: <875> port 0x500-0x5ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 4.0 on pci0 sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x108000 sym2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10a000 sym2: chip clock is 40218KHz sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: open drain IRQ line driver, using on-chip SRAM sym2: using LOAD/STORE-based firmware. sym2: [MPSAFE] sym2: [ITHREAD] sym3: <875> port 0x600-0x6ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff at device 4.1 on pci0 sym3: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10c000 sym3: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10e000 sym3: chip clock is 40218KHz sym3: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: open drain IRQ line driver, using on-chip SRAM sym3: using LOAD/STORE-based firmware. sym3: [MPSAFE] sym3: [ITHREAD] atapci0: port 0x700-0x707,0x718-0x71b,0x710-0x717,0x708-0x70b,0x720-0x72f at device 6.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x720 pcib0: belatedly registered as interrupt controller for vector 0x208 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: HW has secondary channel disabled ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x700 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x718 ata2: reset tp1 mask=03 ostat0=00 ostat1=00 ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=00 stat1=00 devices=0x4 ata2: [MPSAFE] ata2: [ITHREAD] pcib1: mem 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f,0x7ffec000000-0x7ffec0000ff irq 562,560,561,564,566 on nexus0 pcib1: Schizo, version 4, IGN 0x8, bus A, 66MHz Timecounter "pcib1" frequency 150000000 Hz quality 100 pcib1: DVMA map: 0xc0000000 to 0xffffffff pcib1: bus range 0 to 0; PCI bus 0 pcib1: [FILTER] pcib1: [FILTER] pcib1: [FILTER] pcib1: [FILTER] pci1: on pcib1 pci1: domain=1, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=1, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib2: mem 0x40004f00000-0x40004f17fff,0x40004c10000-0x40004c1004f,0x7ffea000000-0x7ffea0000ff irq 627,624,625,628,629 on nexus0 pcib2: Schizo, version 4, IGN 0x9, bus B, 33MHz pcib2: DVMA map: 0xc0000000 to 0xffffffff pcib2: bus range 0 to 0; PCI bus 0 pcib2: [FILTER] pci2: on pcib2 pci2: domain=2, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=2, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x108e, dev=0x1100, revid=0x01 domain=2, bus=0, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) map[10]: type Memory, range 32, base 0x7d000000, size 24, enabled map[14]: type Memory, range 32, base 0x7e000000, size 23, enabled found-> vendor=0x108e, dev=0x1103, revid=0x01 domain=2, bus=0, slot=1, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) map[10]: type Memory, range 32, base 0x1000000, size 15, memory disabled found-> vendor=0x108e, dev=0xabba, revid=0x11 domain=2, bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled ebus0: mem 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 1.0 on pci2 ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 ebus0: addr 0-0x1fffff (no driver attached) ebus0: addr 0x100000000-0x1000fffff (no driver attached) ebus0: addr 0x10030002e-0x10030002f,0x100300600-0x100300607 (no driver attached) ebus0: addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no driver attached) ebus0: addr 0x100000030-0x100000031 irq 35 (no driver attached) rtc0: addr 0x100300070-0x100300071 irq 36 on ebus0 rtc0: registered as a time-of-day clock (resolution 1000000us) rtc0: invalid timeebus0: addr 0x100300600-0x100300607 (no driver attached) ebus0: addr 0x100300700-0x100300701 (no driver attached) uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on ebus0 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on ebus0 uart1: [FILTER] uart1: fast interrupt scc0: addr 0x100400000-0x10040007f irq 34 on ebus0 scc0: not resetting hardware scc0: [FILTER] uart2: on scc0 uart2: [FILTER] uart2: CTS oflow uart2: fast interrupt uart2: console (9600,n,8,1) uart3: on scc0 uart3: [FILTER] uart3: CTS oflow uart3: fast interrupt scc0: fast interrupt ohci0: mem 0x1000000-0x1007fff at device 1.3 on pci2 ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 ohci0: (New OHCI DeviceId=0x1103108e) ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pci2: at device 2.0 (no driver attached) pcib3: mem 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f,0x7ffe8000000-0x7ffe80000ff irq 626,624,625,628,630 on nexus0 pcib3: Schizo, version 4, IGN 0x9, bus A, 66MHz Timecounter "pcib3" frequency 150000000 Hz quality 100 pcib3: DVMA map: 0xc0000000 to 0xffffffff pcib3: bus range 0 to 0; PCI bus 0 pcib3: [FILTER] pcib3: [FILTER] pcib3: [FILTER] pcib3: [FILTER] pci3: on pcib3 pci3: domain=3, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=3, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x108e, dev=0xabba, revid=0x11 domain=3, bus=0, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled found-> vendor=0x1077, dev=0x2200, revid=0x05 domain=3, bus=0, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x400000, size 12, memory disabled pci3: at device 1.0 (no driver attached) Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 isp0: port 0x300-0x3ff mem 0x400000-0x400fff at device 2.0 on pci3 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x400000 isp0: using Memory space register mapping isp0: [MPSAFE] isp0: [ITHREAD] isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 isp0: Last F/W revision was 2.1.105 isp0: 309 max I/O command limit set isp0: invalid NVRAM header isp0: invalid NVRAM header isp0: Using Node WWN 0x400000007f000009 isp0: Using Port WWN 0x400000007f000009 syscons0: no video adapter found. nexus0: type unknown (no driver attached) Reducing kern.maxvnodes 134011 -> 100000 procfs registered Timecounter "tick" frequency 900000000 Hz quality 10 Timecounters tick every 1.000 msec lo0: bpf attached isp0: LIP Received isp0: Loop UP isp0: Port Database Changed ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire isp0: Firmware State Ready> acd0: setting PIO4 on CMD 646U2 chip isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology 'Private Loop' isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 isp0: PortID 0x0000ef handle 0x0 role Target arrived at tgt 0 WWNN 0x20000004cfb551b1 WWPN 0x21000004cfb551b1 isp0: PortID 0x0000e8 handle 0x1 role Target arrived at tgt 1 WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed acd0: DVDR drive at ata2 as master acd0: read 4134KB/s (4134KB/s) write 172KB/s, 512KB buffer, PIO4 acd0: Reads: CDDA acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym3:0:-1:-1): SCSI BUS reset delivered. (probe0:isp0:0:0:0): Retrying Command (probe1:isp0:0:1:0): Retrying Command pass0 at isp0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 3FP233TR00007316NY71 pass0: 100.000MB/s transfers pass0: Command Queueing Enabled pass1 at isp0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number 3FP239L000007315HL0H pass1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed PortID 0xe8 pass1: Command Queueing Enabled GEOM: new disk da0 GEOM: new disk da1 da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 3FP233TR00007316NY71 da0: 100.000MB/s transfers da0: Command Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number 3FP239L000007315HL0H da1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed PortID 0xe8 da1: Command Queueing Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) SMP: AP CPU #1 Launched! From owner-freebsd-sparc64@FreeBSD.ORG Tue May 5 00:35:00 2009 Return-Path: Delivered-To: freebsd-sparc@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 04D841065672 for ; Tue, 5 May 2009 00:35:00 +0000 (UTC) (envelope-from craig001@lerwick.hopto.org) Received: from lerwick.hopto.org (81-178-20-70.dsl.pipex.com [81.178.20.70]) by mx1.freebsd.org (Postfix) with ESMTP id 92B348FC17 for ; Tue, 5 May 2009 00:34:58 +0000 (UTC) (envelope-from craig001@lerwick.hopto.org) Received: (qmail 45716 invoked by uid 98); 5 May 2009 01:11:20 +0100 Received: from 192.168.0.2 by polaris.lerwick.hopto.org (envelope-from , uid 82) with qmail-scanner-2.01 (clamdscan: 0.88.4/1789. hbedv: 7.1.1.11/6.35.1.178. f-prot: 4.6.6/3.16.14. spamassassin: 3.1.4. Clear:RC:1(192.168.0.2):. Processed in 3.883491 secs); 05 May 2009 00:11:20 -0000 Received: from unknown (HELO ?192.168.0.2?) (192.168.0.2) by lerwick.hopto.org with SMTP; 5 May 2009 01:11:16 +0100 From: Craig Butler To: Olev In-Reply-To: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> References: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> Content-Type: text/plain Date: Tue, 05 May 2009 01:07:13 +0100 Message-Id: <1241482033.86830.2.camel@main.lerwick.hopto.org> Mime-Version: 1.0 X-Mailer: Evolution 2.24.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-sparc@FreeBSD.org Subject: Re: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 May 2009 00:35:00 -0000 nics are Cassini's I think... found-> vendor=0x108e, dev=0xabba, revid=0x11 Correct Marius ?? On Mon, 2009-05-04 at 16:23 +0300, Olev wrote: > As it is not listed in supported systems I gave it a shot. Installs > ok. Onboard ethernet not working. The machine I tested it on has 2x > PCI SCSI cards inside and it finds them too. Verbose dmesg below: > > Sun Fire 480R, No Keyboard > Copyright 2007 Sun Microsystems, Inc. All rights reserved. > OpenBoot 4.22.34, 4096 MB memory installed, Serial #53044977. > Ethernet address 0:3:ba:29:66:f1, Host ID: 832966f1. > > Rebooting with command: boot > Boot device: disk File and args: > > >> FreeBSD/sparc64 boot block > Boot path: /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a > Boot loader: /boot/loader > Consoles: Open Firmware console > > Booting with sun4u support. > > FreeBSD/sparc64 bootstrap loader, Revision 1.0 > (root@obrian.cse.buffalo.edu, Fri May 1 14:51:37 UTC 2009) > bootpath="/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a" > Loading /boot/defaults/loader.conf > /boot/kernel/kernel data=0x7c0348+0x78d48 syms=[0x8+0x823e0+0x8+0x70aa3] > / > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel] in 8 seconds... > > Type '?' for a list of commands, 'help' for more detailed help. > OK boot -v > jumping to kernel entry at 0xc0078000. > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-RELEASE #0: Sat May 2 08:25:23 UTC 2009 > root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000. > real memory = 4294967296 (4096 MB) > avail memory = 4174045184 (3980 MB) > machine: SUNW,Sun-Fire-480R > cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) > mask=0x23 maxtl=5 maxwin=7 > initalizing intr_countp > cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) > mask=0x23 maxtl=5 maxwin=7 > INTR: Adding CPU 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > wlan: <802.11 Link Layer> > firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc05fd180 > registered firmware set > firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc060202e > registered firmware set > firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc06079ce > registered firmware set > firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc060fa7c > registered firmware set > firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc06174f2 > registered firmware set > firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc06213b6 > registered firmware set > firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0628148 > registered firmware set > firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc0631fe4 > registered firmware set > firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0644bc6 > registered firmware set > firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0657964 > registered firmware set > firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc06713da > registered firmware set > firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc068ef94 > registered firmware set > random: > kbd0 at kbdmux0 > nfslock: pseudo-device > mem: > null: > openfirm: > nexus0: > nexus0: mem 0x40000400000-0x40000400047 type > memory-controller (no driver attached) > nexus0: mem 0x40001400000-0x40001400047 type > memory-controller (no driver attached) > pcib0: mem > 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f,0x7ffee000000-0x7ffee0000ff > irq 563,560,561,564,565 on nexus0 > pcib0: Schizo, version 4, IGN 0x8, bus B, 33MHz > pcib0: DVMA map: 0xc0000000 to 0xffffffff > pcib0: bus range 0 to 0; PCI bus 0 > pcib0: [FILTER] > pci0: on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x108e, dev=0x8001, revid=0x00 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1000, dev=0x000f, revid=0x14 > domain=0, bus=0, slot=3, func=0 > class=01-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=255 > map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled > map[14]: type Memory, range 32, base 0x100000, size 8, enabled > map[18]: type Memory, range 32, base 0x102000, size 12, enabled > found-> vendor=0x1000, dev=0x000f, revid=0x14 > domain=0, bus=0, slot=3, func=1 > class=01-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) > intpin=b, irq=255 > map[10]: type I/O Port, range 32, base 0x400, size 8, port disabled > map[14]: type Memory, range 32, base 0x104000, size 8, enabled > map[18]: type Memory, range 32, base 0x106000, size 12, enabled > found-> vendor=0x1000, dev=0x000f, revid=0x14 > domain=0, bus=0, slot=4, func=0 > class=01-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=255 > map[10]: type I/O Port, range 32, base 0x500, size 8, port disabled > map[14]: type Memory, range 32, base 0x108000, size 8, enabled > map[18]: type Memory, range 32, base 0x10a000, size 12, enabled > found-> vendor=0x1000, dev=0x000f, revid=0x14 > domain=0, bus=0, slot=4, func=1 > class=01-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) > intpin=b, irq=255 > map[10]: type I/O Port, range 32, base 0x600, size 8, port disabled > map[14]: type Memory, range 32, base 0x10c000, size 8, enabled > map[18]: type Memory, range 32, base 0x10e000, size 12, enabled > found-> vendor=0x1095, dev=0x0646, revid=0x07 > domain=0, bus=0, slot=6, func=0 > class=01-01-8f, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) > intpin=a, irq=255 > powerspec 1 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0x700, size 3, port disabled > map[14]: type I/O Port, range 32, base 0x718, size 2, enabled > map[18]: type I/O Port, range 32, base 0x710, size 3, enabled > map[1c]: type I/O Port, range 32, base 0x708, size 2, enabled > map[20]: type I/O Port, range 32, base 0x720, size 4, enabled > sym0: <875> port 0x300-0x3ff mem 0x100000-0x1000ff,0x102000-0x102fff > at device 3.0 on pci0 > sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x100000 > sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x102000 > sym0: chip clock is 40218KHz > sym0: No NVRAM, ID 7, Fast-20, SE, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sym0: [MPSAFE] > sym0: [ITHREAD] > sym1: <875> port 0x400-0x4ff mem 0x104000-0x1040ff,0x106000-0x106fff > at device 3.1 on pci0 > sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x104000 > sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x106000 > sym1: chip clock is 40218KHz > sym1: No NVRAM, ID 7, Fast-20, SE, parity checking > sym1: open drain IRQ line driver, using on-chip SRAM > sym1: using LOAD/STORE-based firmware. > sym1: [MPSAFE] > sym1: [ITHREAD] > sym2: <875> port 0x500-0x5ff mem 0x108000-0x1080ff,0x10a000-0x10afff > at device 4.0 on pci0 > sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x108000 > sym2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10a000 > sym2: chip clock is 40218KHz > sym2: No NVRAM, ID 7, Fast-20, SE, parity checking > sym2: open drain IRQ line driver, using on-chip SRAM > sym2: using LOAD/STORE-based firmware. > sym2: [MPSAFE] > sym2: [ITHREAD] > sym3: <875> port 0x600-0x6ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff > at device 4.1 on pci0 > sym3: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10c000 > sym3: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10e000 > sym3: chip clock is 40218KHz > sym3: No NVRAM, ID 7, Fast-20, SE, parity checking > sym3: open drain IRQ line driver, using on-chip SRAM > sym3: using LOAD/STORE-based firmware. > sym3: [MPSAFE] > sym3: [ITHREAD] > atapci0: port > 0x700-0x707,0x718-0x71b,0x710-0x717,0x708-0x70b,0x720-0x72f at device > 6.0 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x720 > pcib0: belatedly registered as interrupt controller for vector 0x208 > atapci0: [MPSAFE] > atapci0: [ITHREAD] > atapci0: HW has secondary channel disabled > ata2: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x700 > atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x718 > ata2: reset tp1 mask=03 ostat0=00 ostat1=00 > ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata2: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 > ata2: reset tp2 stat0=00 stat1=00 devices=0x4 > ata2: [MPSAFE] > ata2: [ITHREAD] > pcib1: mem > 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f,0x7ffec000000-0x7ffec0000ff > irq 562,560,561,564,566 on nexus0 > pcib1: Schizo, version 4, IGN 0x8, bus A, 66MHz > Timecounter "pcib1" frequency 150000000 Hz quality 100 > pcib1: DVMA map: 0xc0000000 to 0xffffffff > pcib1: bus range 0 to 0; PCI bus 0 > pcib1: [FILTER] > pcib1: [FILTER] > pcib1: [FILTER] > pcib1: [FILTER] > pci1: on pcib1 > pci1: domain=1, physical bus=0 > found-> vendor=0x108e, dev=0x8001, revid=0x00 > domain=1, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pcib2: mem > 0x40004f00000-0x40004f17fff,0x40004c10000-0x40004c1004f,0x7ffea000000-0x7ffea0000ff > irq 627,624,625,628,629 on nexus0 > pcib2: Schizo, version 4, IGN 0x9, bus B, 33MHz > pcib2: DVMA map: 0xc0000000 to 0xffffffff > pcib2: bus range 0 to 0; PCI bus 0 > pcib2: [FILTER] > pci2: on pcib2 > pci2: domain=2, physical bus=0 > found-> vendor=0x108e, dev=0x8001, revid=0x00 > domain=2, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x108e, dev=0x1100, revid=0x01 > domain=2, bus=0, slot=1, func=0 > class=06-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) > lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) > map[10]: type Memory, range 32, base 0x7d000000, size 24, enabled > map[14]: type Memory, range 32, base 0x7e000000, size 23, enabled > found-> vendor=0x108e, dev=0x1103, revid=0x01 > domain=2, bus=0, slot=1, func=3 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) > lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) > map[10]: type Memory, range 32, base 0x1000000, size 15, memory disabled > found-> vendor=0x108e, dev=0xabba, revid=0x11 > domain=2, bus=0, slot=2, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) > lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=255 > map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled > ebus0: mem > 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 1.0 on pci2 > ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 > ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 > ebus0: addr 0-0x1fffff (no driver attached) > ebus0: addr 0x100000000-0x1000fffff (no driver attached) > ebus0: addr 0x10030002e-0x10030002f,0x100300600-0x100300607 > (no driver attached) > ebus0: addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no > driver attached) > ebus0: addr 0x100000030-0x100000031 irq 35 (no driver attached) > rtc0: addr 0x100300070-0x100300071 irq 36 on ebus0 > rtc0: registered as a time-of-day clock (resolution 1000000us) > rtc0: invalid timeebus0: addr 0x100300600-0x100300607 (no > driver attached) > ebus0: addr 0x100300700-0x100300701 (no driver attached) > uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on ebus0 > uart0: [FILTER] > uart0: fast interrupt > uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on ebus0 > uart1: [FILTER] > uart1: fast interrupt > scc0: addr > 0x100400000-0x10040007f irq 34 on ebus0 > scc0: not resetting hardware > scc0: [FILTER] > uart2: on scc0 > uart2: [FILTER] > uart2: CTS oflow > uart2: fast interrupt > uart2: console (9600,n,8,1) > uart3: on scc0 > uart3: [FILTER] > uart3: CTS oflow > uart3: fast interrupt > scc0: fast interrupt > ohci0: mem 0x1000000-0x1007fff at device 1.3 on pci2 > ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 > ohci0: (New OHCI DeviceId=0x1103108e) > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb0: OHCI version 1.0, legacy support > usb0: on ohci0 > usb0: USB revision 1.0 > uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 4 ports with 4 removable, self powered > pci2: at device 2.0 (no driver attached) > pcib3: mem > 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f,0x7ffe8000000-0x7ffe80000ff > irq 626,624,625,628,630 on nexus0 > pcib3: Schizo, version 4, IGN 0x9, bus A, 66MHz > Timecounter "pcib3" frequency 150000000 Hz quality 100 > pcib3: DVMA map: 0xc0000000 to 0xffffffff > pcib3: bus range 0 to 0; PCI bus 0 > pcib3: [FILTER] > pcib3: [FILTER] > pcib3: [FILTER] > pcib3: [FILTER] > pci3: on pcib3 > pci3: domain=3, physical bus=0 > found-> vendor=0x108e, dev=0x8001, revid=0x00 > domain=3, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x108e, dev=0xabba, revid=0x11 > domain=3, bus=0, slot=1, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) > lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=255 > map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled > found-> vendor=0x1077, dev=0x2200, revid=0x05 > domain=3, bus=0, slot=2, func=0 > class=01-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=255 > powerspec 1 supports D0 D3 current D0 > map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled > map[14]: type Memory, range 32, base 0x400000, size 12, memory disabled > pci3: at device 1.0 (no driver attached) > Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 > isp0: port 0x300-0x3ff mem > 0x400000-0x400fff at device 2.0 on pci3 > isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x400000 > isp0: using Memory space register mapping > isp0: [MPSAFE] > isp0: [ITHREAD] > isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > isp0: Last F/W revision was 2.1.105 > isp0: 309 max I/O command limit set > isp0: invalid NVRAM header > isp0: invalid NVRAM header > isp0: Using Node WWN 0x400000007f000009 > isp0: Using Port WWN 0x400000007f000009 > syscons0: no video adapter found. > nexus0: type unknown (no driver attached) > Reducing kern.maxvnodes 134011 -> 100000 > procfs registered > Timecounter "tick" frequency 900000000 Hz quality 10 > Timecounters tick every 1.000 msec > lo0: bpf attached > isp0: LIP Received > isp0: Loop UP > isp0: Port Database Changed > ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire > isp0: Firmware State Ready> > acd0: setting PIO4 on CMD 646U2 chip > isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology 'Private Loop' > isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 > isp0: PortID 0x0000ef handle 0x0 role Target arrived at tgt 0 > WWNN 0x20000004cfb551b1 WWPN 0x21000004cfb551b1 > isp0: PortID 0x0000e8 handle 0x1 role Target arrived at tgt 1 > WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed > acd0: DVDR drive at ata2 as master > acd0: read 4134KB/s (4134KB/s) write 172KB/s, 512KB buffer, PIO4 > acd0: Reads: CDDA > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write > acd0: Audio: play, 16 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > Waiting 5 seconds for SCSI devices to settle > (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. > (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. > (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. > (noperiph:sym3:0:-1:-1): SCSI BUS reset delivered. > (probe0:isp0:0:0:0): Retrying Command > (probe1:isp0:0:1:0): Retrying Command > pass0 at isp0 bus 0 target 0 lun 0 > pass0: Fixed Direct Access SCSI-3 device > pass0: Serial Number 3FP233TR00007316NY71 > pass0: 100.000MB/s transfers > pass0: Command Queueing Enabled > pass1 at isp0 bus 0 target 1 lun 0 > pass1: Fixed Direct Access SCSI-3 device > pass1: Serial Number 3FP239L000007315HL0H > pass1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN > 0x21000004cfb558ed PortID 0xe8 > pass1: Command Queueing Enabled > GEOM: new disk da0 > GEOM: new disk da1 > da0 at isp0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-3 device > da0: Serial Number 3FP233TR00007316NY71 > da0: 100.000MB/s transfers > da0: Command Queueing Enabled > da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > da1 at isp0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-3 device > da1: Serial Number 3FP239L000007315HL0H > da1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN > 0x21000004cfb558ed PortID 0xe8 > da1: Command Queueing Enabled > da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > SMP: AP CPU #1 Launched! > _______________________________________________ > freebsd-sparc64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org" From owner-freebsd-sparc64@FreeBSD.ORG Tue May 5 01:26:25 2009 Return-Path: Delivered-To: freebsd-sparc@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0A993106564A for ; Tue, 5 May 2009 01:26:25 +0000 (UTC) (envelope-from mcalderara@phys.ethz.ch) Received: from smtp1.nine.ch (smtp1.nine.ch [217.150.241.29]) by mx1.freebsd.org (Postfix) with ESMTP id 29A448FC0A for ; Tue, 5 May 2009 01:26:24 +0000 (UTC) (envelope-from mcalderara@phys.ethz.ch) Received: from whitehead2.dhcp.lbl.gov (whitehead2.dhcp.lbl.gov [131.243.240.145]) by smtp1.nine.ch (Postfix) with ESMTP id 1F21CDA83CD for ; Tue, 5 May 2009 02:57:51 +0200 (CEST) Message-Id: <51D049E9-2244-410E-AF62-A0D069DA19DB@phys.ethz.ch> From: Mauro Calderara To: freebsd-sparc@FreeBSD.org In-Reply-To: <1241482033.86830.2.camel@main.lerwick.hopto.org> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v930.3) Date: Mon, 4 May 2009 17:57:51 -0700 References: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> <1241482033.86830.2.camel@main.lerwick.hopto.org> X-Mailer: Apple Mail (2.930.3) Cc: Subject: Re: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 May 2009 01:26:25 -0000 > nics are Cassini's I think... > > found-> vendor=0x108e, dev=0xabba, revid=0x11 > > Correct Marius ?? Aww, if you could add support for these, that'd be great! They are also built into the B100s of which I have a few... mauro > On Mon, 2009-05-04 at 16:23 +0300, Olev wrote: >> As it is not listed in supported systems I gave it a shot. Installs >> ok. Onboard ethernet not working. The machine I tested it on has 2x >> PCI SCSI cards inside and it finds them too. Verbose dmesg below: >> >> Sun Fire 480R, No Keyboard >> Copyright 2007 Sun Microsystems, Inc. All rights reserved. >> OpenBoot 4.22.34, 4096 MB memory installed, Serial #53044977. >> Ethernet address 0:3:ba:29:66:f1, Host ID: 832966f1. >> >> Rebooting with command: boot >> Boot device: disk File and args: >> >>>> FreeBSD/sparc64 boot block >> Boot path: /pci@9,600000/SUNW,qlc@2/fp@0,0/ >> disk@w21000004cfb551b1,0:a >> Boot loader: /boot/loader >> Consoles: Open Firmware console >> >> Booting with sun4u support. >> >> FreeBSD/sparc64 bootstrap loader, Revision 1.0 >> (root@obrian.cse.buffalo.edu, Fri May 1 14:51:37 UTC 2009) >> bootpath="/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a" >> Loading /boot/defaults/loader.conf >> /boot/kernel/kernel data=0x7c0348+0x78d48 >> syms=[0x8+0x823e0+0x8+0x70aa3] >> / >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel] in 8 seconds... >> >> Type '?' for a list of commands, 'help' for more detailed help. >> OK boot -v >> jumping to kernel entry at 0xc0078000. >> Copyright (c) 1992-2009 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >> 1994 >> The Regents of the University of California. All rights >> reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 7.2-RELEASE #0: Sat May 2 08:25:23 UTC 2009 >> root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >> Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000. >> real memory = 4294967296 (4096 MB) >> avail memory = 4174045184 (3980 MB) >> machine: SUNW,Sun-Fire-480R >> cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) >> mask=0x23 maxtl=5 maxwin=7 >> initalizing intr_countp >> cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) >> mask=0x23 maxtl=5 maxwin=7 >> INTR: Adding CPU 1 as a target >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> wlan: <802.11 Link Layer> >> firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc05fd180 >> registered firmware set >> firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc060202e >> registered firmware set >> firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc06079ce >> registered firmware set >> firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc060fa7c >> registered firmware set >> firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc06174f2 >> registered firmware set >> firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc06213b6 >> registered firmware set >> firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0628148 >> registered firmware set >> firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc0631fe4 >> registered firmware set >> firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0644bc6 >> registered firmware set >> firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0657964 >> registered firmware set >> firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc06713da >> registered firmware set >> firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc068ef94 >> registered firmware set >> random: >> kbd0 at kbdmux0 >> nfslock: pseudo-device >> mem: >> null: >> openfirm: >> nexus0: >> nexus0: mem 0x40000400000-0x40000400047 type >> memory-controller (no driver attached) >> nexus0: mem 0x40001400000-0x40001400047 type >> memory-controller (no driver attached) >> pcib0: mem >> 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f, >> 0x7ffee000000-0x7ffee0000ff >> irq 563,560,561,564,565 on nexus0 >> pcib0: Schizo, version 4, IGN 0x8, bus B, 33MHz >> pcib0: DVMA map: 0xc0000000 to 0xffffffff >> pcib0: bus range 0 to 0; PCI bus 0 >> pcib0: [FILTER] >> pci0: on pcib0 >> pci0: domain=0, physical bus=0 >> found-> vendor=0x108e, dev=0x8001, revid=0x00 >> domain=0, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 >> ns) >> found-> vendor=0x1000, dev=0x000f, revid=0x14 >> domain=0, bus=0, slot=3, func=0 >> class=01-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 >> (16000 ns) >> intpin=a, irq=255 >> map[10]: type I/O Port, range 32, base 0x300, size 8, port >> disabled >> map[14]: type Memory, range 32, base 0x100000, size 8, >> enabled >> map[18]: type Memory, range 32, base 0x102000, size 12, >> enabled >> found-> vendor=0x1000, dev=0x000f, revid=0x14 >> domain=0, bus=0, slot=3, func=1 >> class=01-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 >> (16000 ns) >> intpin=b, irq=255 >> map[10]: type I/O Port, range 32, base 0x400, size 8, port >> disabled >> map[14]: type Memory, range 32, base 0x104000, size 8, >> enabled >> map[18]: type Memory, range 32, base 0x106000, size 12, >> enabled >> found-> vendor=0x1000, dev=0x000f, revid=0x14 >> domain=0, bus=0, slot=4, func=0 >> class=01-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 >> (16000 ns) >> intpin=a, irq=255 >> map[10]: type I/O Port, range 32, base 0x500, size 8, port >> disabled >> map[14]: type Memory, range 32, base 0x108000, size 8, >> enabled >> map[18]: type Memory, range 32, base 0x10a000, size 12, >> enabled >> found-> vendor=0x1000, dev=0x000f, revid=0x14 >> domain=0, bus=0, slot=4, func=1 >> class=01-00-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 >> (16000 ns) >> intpin=b, irq=255 >> map[10]: type I/O Port, range 32, base 0x600, size 8, port >> disabled >> map[14]: type Memory, range 32, base 0x10c000, size 8, >> enabled >> map[18]: type Memory, range 32, base 0x10e000, size 12, >> enabled >> found-> vendor=0x1095, dev=0x0646, revid=0x07 >> domain=0, bus=0, slot=6, func=0 >> class=01-01-8f, hdrtype=0x00, mfdev=0 >> cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) >> lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 >> (1000 ns) >> intpin=a, irq=255 >> powerspec 1 supports D0 D1 D2 D3 current D0 >> map[10]: type I/O Port, range 32, base 0x700, size 3, port >> disabled >> map[14]: type I/O Port, range 32, base 0x718, size 2, enabled >> map[18]: type I/O Port, range 32, base 0x710, size 3, enabled >> map[1c]: type I/O Port, range 32, base 0x708, size 2, enabled >> map[20]: type I/O Port, range 32, base 0x720, size 4, enabled >> sym0: <875> port 0x300-0x3ff mem 0x100000-0x1000ff,0x102000-0x102fff >> at device 3.0 on pci0 >> sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x100000 >> sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x102000 >> sym0: chip clock is 40218KHz >> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym0: open drain IRQ line driver, using on-chip SRAM >> sym0: using LOAD/STORE-based firmware. >> sym0: [MPSAFE] >> sym0: [ITHREAD] >> sym1: <875> port 0x400-0x4ff mem 0x104000-0x1040ff,0x106000-0x106fff >> at device 3.1 on pci0 >> sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x104000 >> sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x106000 >> sym1: chip clock is 40218KHz >> sym1: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym1: open drain IRQ line driver, using on-chip SRAM >> sym1: using LOAD/STORE-based firmware. >> sym1: [MPSAFE] >> sym1: [ITHREAD] >> sym2: <875> port 0x500-0x5ff mem 0x108000-0x1080ff,0x10a000-0x10afff >> at device 4.0 on pci0 >> sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x108000 >> sym2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10a000 >> sym2: chip clock is 40218KHz >> sym2: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym2: open drain IRQ line driver, using on-chip SRAM >> sym2: using LOAD/STORE-based firmware. >> sym2: [MPSAFE] >> sym2: [ITHREAD] >> sym3: <875> port 0x600-0x6ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff >> at device 4.1 on pci0 >> sym3: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10c000 >> sym3: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10e000 >> sym3: chip clock is 40218KHz >> sym3: No NVRAM, ID 7, Fast-20, SE, parity checking >> sym3: open drain IRQ line driver, using on-chip SRAM >> sym3: using LOAD/STORE-based firmware. >> sym3: [MPSAFE] >> sym3: [ITHREAD] >> atapci0: port >> 0x700-0x707,0x718-0x71b,0x710-0x717,0x708-0x70b,0x720-0x72f at device >> 6.0 on pci0 >> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x720 >> pcib0: belatedly registered as interrupt controller for vector 0x208 >> atapci0: [MPSAFE] >> atapci0: [ITHREAD] >> atapci0: HW has secondary channel disabled >> ata2: on atapci0 >> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x700 >> atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x718 >> ata2: reset tp1 mask=03 ostat0=00 ostat1=00 >> ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata2: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 >> ata2: reset tp2 stat0=00 stat1=00 devices=0x4 >> ata2: [MPSAFE] >> ata2: [ITHREAD] >> pcib1: mem >> 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f, >> 0x7ffec000000-0x7ffec0000ff >> irq 562,560,561,564,566 on nexus0 >> pcib1: Schizo, version 4, IGN 0x8, bus A, 66MHz >> Timecounter "pcib1" frequency 150000000 Hz quality 100 >> pcib1: DVMA map: 0xc0000000 to 0xffffffff >> pcib1: bus range 0 to 0; PCI bus 0 >> pcib1: [FILTER] >> pcib1: [FILTER] >> pcib1: [FILTER] >> pcib1: [FILTER] >> pci1: on pcib1 >> pci1: domain=1, physical bus=0 >> found-> vendor=0x108e, dev=0x8001, revid=0x00 >> domain=1, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 >> ns) >> pcib2: mem >> 0x40004f00000-0x40004f17fff,0x40004c10000-0x40004c1004f, >> 0x7ffea000000-0x7ffea0000ff >> irq 627,624,625,628,629 on nexus0 >> pcib2: Schizo, version 4, IGN 0x9, bus B, 33MHz >> pcib2: DVMA map: 0xc0000000 to 0xffffffff >> pcib2: bus range 0 to 0; PCI bus 0 >> pcib2: [FILTER] >> pci2: on pcib2 >> pci2: domain=2, physical bus=0 >> found-> vendor=0x108e, dev=0x8001, revid=0x00 >> domain=2, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 >> ns) >> found-> vendor=0x108e, dev=0x1100, revid=0x01 >> domain=2, bus=0, slot=1, func=0 >> class=06-80-00, hdrtype=0x00, mfdev=1 >> cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) >> lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 >> (6250 ns) >> map[10]: type Memory, range 32, base 0x7d000000, size 24, >> enabled >> map[14]: type Memory, range 32, base 0x7e000000, size 23, >> enabled >> found-> vendor=0x108e, dev=0x1103, revid=0x01 >> domain=2, bus=0, slot=1, func=3 >> class=0c-03-10, hdrtype=0x00, mfdev=1 >> cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) >> lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 >> (1250 ns) >> map[10]: type Memory, range 32, base 0x1000000, size 15, >> memory disabled >> found-> vendor=0x108e, dev=0xabba, revid=0x11 >> domain=2, bus=0, slot=2, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) >> lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 >> (16000 ns) >> intpin=a, irq=255 >> map[10]: type Memory, range 32, base 0x200000, size 21, >> memory disabled >> ebus0: mem >> 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 1.0 on pci2 >> ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 >> ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 >> ebus0: addr 0-0x1fffff (no driver attached) >> ebus0: addr 0x100000000-0x1000fffff (no driver attached) >> ebus0: addr 0x10030002e-0x10030002f,0x100300600-0x100300607 >> (no driver attached) >> ebus0: addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no >> driver attached) >> ebus0: addr 0x100000030-0x100000031 irq 35 (no driver attached) >> rtc0: addr 0x100300070-0x100300071 irq 36 on ebus0 >> rtc0: registered as a time-of-day clock (resolution 1000000us) >> rtc0: invalid timeebus0: addr 0x100300600-0x100300607 (no >> driver attached) >> ebus0: addr 0x100300700-0x100300701 (no driver attached) >> uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on >> ebus0 >> uart0: [FILTER] >> uart0: fast interrupt >> uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on >> ebus0 >> uart1: [FILTER] >> uart1: fast interrupt >> scc0: addr >> 0x100400000-0x10040007f irq 34 on ebus0 >> scc0: not resetting hardware >> scc0: [FILTER] >> uart2: on scc0 >> uart2: [FILTER] >> uart2: CTS oflow >> uart2: fast interrupt >> uart2: console (9600,n,8,1) >> uart3: on scc0 >> uart3: [FILTER] >> uart3: CTS oflow >> uart3: fast interrupt >> scc0: fast interrupt >> ohci0: mem 0x1000000-0x1007fff at >> device 1.3 on pci2 >> ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 >> ohci0: (New OHCI DeviceId=0x1103108e) >> ohci0: [GIANT-LOCKED] >> ohci0: [ITHREAD] >> usb0: OHCI version 1.0, legacy support >> usb0: on ohci0 >> usb0: USB revision 1.0 >> uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> >> on usb0 >> uhub0: 4 ports with 4 removable, self powered >> pci2: at device 2.0 (no driver attached) >> pcib3: mem >> 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f, >> 0x7ffe8000000-0x7ffe80000ff >> irq 626,624,625,628,630 on nexus0 >> pcib3: Schizo, version 4, IGN 0x9, bus A, 66MHz >> Timecounter "pcib3" frequency 150000000 Hz quality 100 >> pcib3: DVMA map: 0xc0000000 to 0xffffffff >> pcib3: bus range 0 to 0; PCI bus 0 >> pcib3: [FILTER] >> pcib3: [FILTER] >> pcib3: [FILTER] >> pcib3: [FILTER] >> pci3: on pcib3 >> pci3: domain=3, physical bus=0 >> found-> vendor=0x108e, dev=0x8001, revid=0x00 >> domain=3, bus=0, slot=0, func=0 >> class=06-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 >> ns) >> found-> vendor=0x108e, dev=0xabba, revid=0x11 >> domain=3, bus=0, slot=1, func=0 >> class=02-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) >> lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 >> (16000 ns) >> intpin=a, irq=255 >> map[10]: type Memory, range 32, base 0x200000, size 21, >> memory disabled >> found-> vendor=0x1077, dev=0x2200, revid=0x05 >> domain=3, bus=0, slot=2, func=0 >> class=01-00-00, hdrtype=0x00, mfdev=0 >> cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) >> lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 >> (0 ns) >> intpin=a, irq=255 >> powerspec 1 supports D0 D3 current D0 >> map[10]: type I/O Port, range 32, base 0x300, size 8, port >> disabled >> map[14]: type Memory, range 32, base 0x400000, size 12, >> memory disabled >> pci3: at device 1.0 (no driver attached) >> Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 >> isp0: port 0x300-0x3ff mem >> 0x400000-0x400fff at device 2.0 on pci3 >> isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x400000 >> isp0: using Memory space register mapping >> isp0: [MPSAFE] >> isp0: [ITHREAD] >> isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 >> isp0: Last F/W revision was 2.1.105 >> isp0: 309 max I/O command limit set >> isp0: invalid NVRAM header >> isp0: invalid NVRAM header >> isp0: Using Node WWN 0x400000007f000009 >> isp0: Using Port WWN 0x400000007f000009 >> syscons0: no video adapter found. >> nexus0: type unknown (no driver attached) >> Reducing kern.maxvnodes 134011 -> 100000 >> procfs registered >> Timecounter "tick" frequency 900000000 Hz quality 10 >> Timecounters tick every 1.000 msec >> lo0: bpf attached >> isp0: LIP Received >> isp0: Loop UP >> isp0: Port Database Changed >> ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire >> isp0: Firmware State Ready> >> acd0: setting PIO4 on CMD 646U2 chip >> isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology >> 'Private Loop' >> isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 >> isp0: PortID 0x0000ef handle 0x0 role Target arrived at tgt 0 >> WWNN 0x20000004cfb551b1 WWPN 0x21000004cfb551b1 >> isp0: PortID 0x0000e8 handle 0x1 role Target arrived at tgt 1 >> WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed >> acd0: DVDR drive at ata2 as master >> acd0: read 4134KB/s (4134KB/s) write 172KB/s, 512KB buffer, PIO4 >> acd0: Reads: CDDA >> acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write >> acd0: Audio: play, 16 volume levels >> acd0: Mechanism: ejectable tray, unlocked >> acd0: Medium: no/blank disc >> Waiting 5 seconds for SCSI devices to settle >> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. >> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. >> (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. >> (noperiph:sym3:0:-1:-1): SCSI BUS reset delivered. >> (probe0:isp0:0:0:0): Retrying Command >> (probe1:isp0:0:1:0): Retrying Command >> pass0 at isp0 bus 0 target 0 lun 0 >> pass0: Fixed Direct Access SCSI-3 >> device >> pass0: Serial Number 3FP233TR00007316NY71 >> pass0: 100.000MB/s transfers >> pass0: Command Queueing Enabled >> pass1 at isp0 bus 0 target 1 lun 0 >> pass1: Fixed Direct Access SCSI-3 >> device >> pass1: Serial Number 3FP239L000007315HL0H >> pass1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN >> 0x21000004cfb558ed PortID 0xe8 >> pass1: Command Queueing Enabled >> GEOM: new disk da0 >> GEOM: new disk da1 >> da0 at isp0 bus 0 target 0 lun 0 >> da0: Fixed Direct Access SCSI-3 device >> da0: Serial Number 3FP233TR00007316NY71 >> da0: 100.000MB/s transfers >> da0: Command Queueing Enabled >> da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) >> da1 at isp0 bus 0 target 1 lun 0 >> da1: Fixed Direct Access SCSI-3 device >> da1: Serial Number 3FP239L000007315HL0H >> da1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN >> 0x21000004cfb558ed PortID 0xe8 >> da1: Command Queueing Enabled >> da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) >> SMP: AP CPU #1 Launched! >> _______________________________________________ >> freebsd-sparc64@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 >> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org >> " > > _______________________________________________ > freebsd-sparc64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org > " From owner-freebsd-sparc64@FreeBSD.ORG Tue May 5 01:34:16 2009 Return-Path: Delivered-To: freebsd-sparc@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1B5AF106566C for ; Tue, 5 May 2009 01:34:16 +0000 (UTC) (envelope-from craig001@lerwick.hopto.org) Received: from lerwick.hopto.org (81-178-20-70.dsl.pipex.com [81.178.20.70]) by mx1.freebsd.org (Postfix) with ESMTP id A7F258FC12 for ; Tue, 5 May 2009 01:34:14 +0000 (UTC) (envelope-from craig001@lerwick.hopto.org) Received: (qmail 63655 invoked by uid 98); 5 May 2009 02:37:18 +0100 Received: from 192.168.0.2 by polaris.lerwick.hopto.org (envelope-from , uid 82) with qmail-scanner-2.01 (clamdscan: 0.88.4/1789. hbedv: 7.1.1.11/6.35.1.178. f-prot: 4.6.6/3.16.14. spamassassin: 3.1.4. Clear:RC:1(192.168.0.2):. Processed in 3.564422 secs); 05 May 2009 01:37:18 -0000 Received: from unknown (HELO ?192.168.0.2?) (192.168.0.2) by lerwick.hopto.org with SMTP; 5 May 2009 02:37:14 +0100 From: Craig Butler To: Mauro Calderara In-Reply-To: <51D049E9-2244-410E-AF62-A0D069DA19DB@phys.ethz.ch> References: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> <1241482033.86830.2.camel@main.lerwick.hopto.org> <51D049E9-2244-410E-AF62-A0D069DA19DB@phys.ethz.ch> Content-Type: text/plain Date: Tue, 05 May 2009 02:33:11 +0100 Message-Id: <1241487191.87316.4.camel@main.lerwick.hopto.org> Mime-Version: 1.0 X-Mailer: Evolution 2.24.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: freebsd-sparc@FreeBSD.org Subject: Re: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 May 2009 01:34:16 -0000 On Mon, 2009-05-04 at 17:57 -0700, Mauro Calderara wrote: > > nics are Cassini's I think... > > > > found-> vendor=0x108e, dev=0xabba, revid=0x11 > > > > Correct Marius ?? > > Aww, if you could add support for these, that'd be great! They are > also built into the B100s of which I have a few... > > mauro Join the gang... I also have a fair few B100s and B200x sitting in a B1600 chassis. I have to update the firmwares on all of them then hand em over to Marius (I haven't forgotten :) ) We are working on it, but currently the last build the B100s were panic'ing on boot. I should be able to dedicate more time to this when am off contract from Ireland. Cheers /Craig > > > On Mon, 2009-05-04 at 16:23 +0300, Olev wrote: > >> As it is not listed in supported systems I gave it a shot. Installs > >> ok. Onboard ethernet not working. The machine I tested it on has 2x > >> PCI SCSI cards inside and it finds them too. Verbose dmesg below: > >> > >> Sun Fire 480R, No Keyboard > >> Copyright 2007 Sun Microsystems, Inc. All rights reserved. > >> OpenBoot 4.22.34, 4096 MB memory installed, Serial #53044977. > >> Ethernet address 0:3:ba:29:66:f1, Host ID: 832966f1. > >> > >> Rebooting with command: boot > >> Boot device: disk File and args: > >> > >>>> FreeBSD/sparc64 boot block > >> Boot path: /pci@9,600000/SUNW,qlc@2/fp@0,0/ > >> disk@w21000004cfb551b1,0:a > >> Boot loader: /boot/loader > >> Consoles: Open Firmware console > >> > >> Booting with sun4u support. > >> > >> FreeBSD/sparc64 bootstrap loader, Revision 1.0 > >> (root@obrian.cse.buffalo.edu, Fri May 1 14:51:37 UTC 2009) > >> bootpath="/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a" > >> Loading /boot/defaults/loader.conf > >> /boot/kernel/kernel data=0x7c0348+0x78d48 > >> syms=[0x8+0x823e0+0x8+0x70aa3] > >> / > >> Hit [Enter] to boot immediately, or any other key for command prompt. > >> Booting [/boot/kernel/kernel] in 8 seconds... > >> > >> Type '?' for a list of commands, 'help' for more detailed help. > >> OK boot -v > >> jumping to kernel entry at 0xc0078000. > >> Copyright (c) 1992-2009 The FreeBSD Project. > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > >> 1994 > >> The Regents of the University of California. All rights > >> reserved. > >> FreeBSD is a registered trademark of The FreeBSD Foundation. > >> FreeBSD 7.2-RELEASE #0: Sat May 2 08:25:23 UTC 2009 > >> root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > >> Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000. > >> real memory = 4294967296 (4096 MB) > >> avail memory = 4174045184 (3980 MB) > >> machine: SUNW,Sun-Fire-480R > >> cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) > >> mask=0x23 maxtl=5 maxwin=7 > >> initalizing intr_countp > >> cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) > >> mask=0x23 maxtl=5 maxwin=7 > >> INTR: Adding CPU 1 as a target > >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > >> wlan: <802.11 Link Layer> > >> firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc05fd180 > >> registered firmware set > >> firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc060202e > >> registered firmware set > >> firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc06079ce > >> registered firmware set > >> firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc060fa7c > >> registered firmware set > >> firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc06174f2 > >> registered firmware set > >> firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc06213b6 > >> registered firmware set > >> firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0628148 > >> registered firmware set > >> firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc0631fe4 > >> registered firmware set > >> firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0644bc6 > >> registered firmware set > >> firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0657964 > >> registered firmware set > >> firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc06713da > >> registered firmware set > >> firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc068ef94 > >> registered firmware set > >> random: > >> kbd0 at kbdmux0 > >> nfslock: pseudo-device > >> mem: > >> null: > >> openfirm: > >> nexus0: > >> nexus0: mem 0x40000400000-0x40000400047 type > >> memory-controller (no driver attached) > >> nexus0: mem 0x40001400000-0x40001400047 type > >> memory-controller (no driver attached) > >> pcib0: mem > >> 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f, > >> 0x7ffee000000-0x7ffee0000ff > >> irq 563,560,561,564,565 on nexus0 > >> pcib0: Schizo, version 4, IGN 0x8, bus B, 33MHz > >> pcib0: DVMA map: 0xc0000000 to 0xffffffff > >> pcib0: bus range 0 to 0; PCI bus 0 > >> pcib0: [FILTER] > >> pci0: on pcib0 > >> pci0: domain=0, physical bus=0 > >> found-> vendor=0x108e, dev=0x8001, revid=0x00 > >> domain=0, bus=0, slot=0, func=0 > >> class=06-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) > >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 > >> ns) > >> found-> vendor=0x1000, dev=0x000f, revid=0x14 > >> domain=0, bus=0, slot=3, func=0 > >> class=01-00-00, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=a, irq=255 > >> map[10]: type I/O Port, range 32, base 0x300, size 8, port > >> disabled > >> map[14]: type Memory, range 32, base 0x100000, size 8, > >> enabled > >> map[18]: type Memory, range 32, base 0x102000, size 12, > >> enabled > >> found-> vendor=0x1000, dev=0x000f, revid=0x14 > >> domain=0, bus=0, slot=3, func=1 > >> class=01-00-00, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=b, irq=255 > >> map[10]: type I/O Port, range 32, base 0x400, size 8, port > >> disabled > >> map[14]: type Memory, range 32, base 0x104000, size 8, > >> enabled > >> map[18]: type Memory, range 32, base 0x106000, size 12, > >> enabled > >> found-> vendor=0x1000, dev=0x000f, revid=0x14 > >> domain=0, bus=0, slot=4, func=0 > >> class=01-00-00, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=a, irq=255 > >> map[10]: type I/O Port, range 32, base 0x500, size 8, port > >> disabled > >> map[14]: type Memory, range 32, base 0x108000, size 8, > >> enabled > >> map[18]: type Memory, range 32, base 0x10a000, size 12, > >> enabled > >> found-> vendor=0x1000, dev=0x000f, revid=0x14 > >> domain=0, bus=0, slot=4, func=1 > >> class=01-00-00, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) > >> lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=b, irq=255 > >> map[10]: type I/O Port, range 32, base 0x600, size 8, port > >> disabled > >> map[14]: type Memory, range 32, base 0x10c000, size 8, > >> enabled > >> map[18]: type Memory, range 32, base 0x10e000, size 12, > >> enabled > >> found-> vendor=0x1095, dev=0x0646, revid=0x07 > >> domain=0, bus=0, slot=6, func=0 > >> class=01-01-8f, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) > >> lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 > >> (1000 ns) > >> intpin=a, irq=255 > >> powerspec 1 supports D0 D1 D2 D3 current D0 > >> map[10]: type I/O Port, range 32, base 0x700, size 3, port > >> disabled > >> map[14]: type I/O Port, range 32, base 0x718, size 2, enabled > >> map[18]: type I/O Port, range 32, base 0x710, size 3, enabled > >> map[1c]: type I/O Port, range 32, base 0x708, size 2, enabled > >> map[20]: type I/O Port, range 32, base 0x720, size 4, enabled > >> sym0: <875> port 0x300-0x3ff mem 0x100000-0x1000ff,0x102000-0x102fff > >> at device 3.0 on pci0 > >> sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x100000 > >> sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x102000 > >> sym0: chip clock is 40218KHz > >> sym0: No NVRAM, ID 7, Fast-20, SE, parity checking > >> sym0: open drain IRQ line driver, using on-chip SRAM > >> sym0: using LOAD/STORE-based firmware. > >> sym0: [MPSAFE] > >> sym0: [ITHREAD] > >> sym1: <875> port 0x400-0x4ff mem 0x104000-0x1040ff,0x106000-0x106fff > >> at device 3.1 on pci0 > >> sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x104000 > >> sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x106000 > >> sym1: chip clock is 40218KHz > >> sym1: No NVRAM, ID 7, Fast-20, SE, parity checking > >> sym1: open drain IRQ line driver, using on-chip SRAM > >> sym1: using LOAD/STORE-based firmware. > >> sym1: [MPSAFE] > >> sym1: [ITHREAD] > >> sym2: <875> port 0x500-0x5ff mem 0x108000-0x1080ff,0x10a000-0x10afff > >> at device 4.0 on pci0 > >> sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x108000 > >> sym2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10a000 > >> sym2: chip clock is 40218KHz > >> sym2: No NVRAM, ID 7, Fast-20, SE, parity checking > >> sym2: open drain IRQ line driver, using on-chip SRAM > >> sym2: using LOAD/STORE-based firmware. > >> sym2: [MPSAFE] > >> sym2: [ITHREAD] > >> sym3: <875> port 0x600-0x6ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff > >> at device 4.1 on pci0 > >> sym3: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10c000 > >> sym3: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10e000 > >> sym3: chip clock is 40218KHz > >> sym3: No NVRAM, ID 7, Fast-20, SE, parity checking > >> sym3: open drain IRQ line driver, using on-chip SRAM > >> sym3: using LOAD/STORE-based firmware. > >> sym3: [MPSAFE] > >> sym3: [ITHREAD] > >> atapci0: port > >> 0x700-0x707,0x718-0x71b,0x710-0x717,0x708-0x70b,0x720-0x72f at device > >> 6.0 on pci0 > >> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x720 > >> pcib0: belatedly registered as interrupt controller for vector 0x208 > >> atapci0: [MPSAFE] > >> atapci0: [ITHREAD] > >> atapci0: HW has secondary channel disabled > >> ata2: on atapci0 > >> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x700 > >> atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x718 > >> ata2: reset tp1 mask=03 ostat0=00 ostat1=00 > >> ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > >> ata2: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 > >> ata2: reset tp2 stat0=00 stat1=00 devices=0x4 > >> ata2: [MPSAFE] > >> ata2: [ITHREAD] > >> pcib1: mem > >> 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f, > >> 0x7ffec000000-0x7ffec0000ff > >> irq 562,560,561,564,566 on nexus0 > >> pcib1: Schizo, version 4, IGN 0x8, bus A, 66MHz > >> Timecounter "pcib1" frequency 150000000 Hz quality 100 > >> pcib1: DVMA map: 0xc0000000 to 0xffffffff > >> pcib1: bus range 0 to 0; PCI bus 0 > >> pcib1: [FILTER] > >> pcib1: [FILTER] > >> pcib1: [FILTER] > >> pcib1: [FILTER] > >> pci1: on pcib1 > >> pci1: domain=1, physical bus=0 > >> found-> vendor=0x108e, dev=0x8001, revid=0x00 > >> domain=1, bus=0, slot=0, func=0 > >> class=06-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) > >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 > >> ns) > >> pcib2: mem > >> 0x40004f00000-0x40004f17fff,0x40004c10000-0x40004c1004f, > >> 0x7ffea000000-0x7ffea0000ff > >> irq 627,624,625,628,629 on nexus0 > >> pcib2: Schizo, version 4, IGN 0x9, bus B, 33MHz > >> pcib2: DVMA map: 0xc0000000 to 0xffffffff > >> pcib2: bus range 0 to 0; PCI bus 0 > >> pcib2: [FILTER] > >> pci2: on pcib2 > >> pci2: domain=2, physical bus=0 > >> found-> vendor=0x108e, dev=0x8001, revid=0x00 > >> domain=2, bus=0, slot=0, func=0 > >> class=06-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) > >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 > >> ns) > >> found-> vendor=0x108e, dev=0x1100, revid=0x01 > >> domain=2, bus=0, slot=1, func=0 > >> class=06-80-00, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) > >> lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 > >> (6250 ns) > >> map[10]: type Memory, range 32, base 0x7d000000, size 24, > >> enabled > >> map[14]: type Memory, range 32, base 0x7e000000, size 23, > >> enabled > >> found-> vendor=0x108e, dev=0x1103, revid=0x01 > >> domain=2, bus=0, slot=1, func=3 > >> class=0c-03-10, hdrtype=0x00, mfdev=1 > >> cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) > >> lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 > >> (1250 ns) > >> map[10]: type Memory, range 32, base 0x1000000, size 15, > >> memory disabled > >> found-> vendor=0x108e, dev=0xabba, revid=0x11 > >> domain=2, bus=0, slot=2, func=0 > >> class=02-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) > >> lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=a, irq=255 > >> map[10]: type Memory, range 32, base 0x200000, size 21, > >> memory disabled > >> ebus0: mem > >> 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 1.0 on pci2 > >> ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 > >> ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 > >> ebus0: addr 0-0x1fffff (no driver attached) > >> ebus0: addr 0x100000000-0x1000fffff (no driver attached) > >> ebus0: addr 0x10030002e-0x10030002f,0x100300600-0x100300607 > >> (no driver attached) > >> ebus0: addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no > >> driver attached) > >> ebus0: addr 0x100000030-0x100000031 irq 35 (no driver attached) > >> rtc0: addr 0x100300070-0x100300071 irq 36 on ebus0 > >> rtc0: registered as a time-of-day clock (resolution 1000000us) > >> rtc0: invalid timeebus0: addr 0x100300600-0x100300607 (no > >> driver attached) > >> ebus0: addr 0x100300700-0x100300701 (no driver attached) > >> uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on > >> ebus0 > >> uart0: [FILTER] > >> uart0: fast interrupt > >> uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on > >> ebus0 > >> uart1: [FILTER] > >> uart1: fast interrupt > >> scc0: addr > >> 0x100400000-0x10040007f irq 34 on ebus0 > >> scc0: not resetting hardware > >> scc0: [FILTER] > >> uart2: on scc0 > >> uart2: [FILTER] > >> uart2: CTS oflow > >> uart2: fast interrupt > >> uart2: console (9600,n,8,1) > >> uart3: on scc0 > >> uart3: [FILTER] > >> uart3: CTS oflow > >> uart3: fast interrupt > >> scc0: fast interrupt > >> ohci0: mem 0x1000000-0x1007fff at > >> device 1.3 on pci2 > >> ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 > >> ohci0: (New OHCI DeviceId=0x1103108e) > >> ohci0: [GIANT-LOCKED] > >> ohci0: [ITHREAD] > >> usb0: OHCI version 1.0, legacy support > >> usb0: on ohci0 > >> usb0: USB revision 1.0 > >> uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> > >> on usb0 > >> uhub0: 4 ports with 4 removable, self powered > >> pci2: at device 2.0 (no driver attached) > >> pcib3: mem > >> 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f, > >> 0x7ffe8000000-0x7ffe80000ff > >> irq 626,624,625,628,630 on nexus0 > >> pcib3: Schizo, version 4, IGN 0x9, bus A, 66MHz > >> Timecounter "pcib3" frequency 150000000 Hz quality 100 > >> pcib3: DVMA map: 0xc0000000 to 0xffffffff > >> pcib3: bus range 0 to 0; PCI bus 0 > >> pcib3: [FILTER] > >> pcib3: [FILTER] > >> pcib3: [FILTER] > >> pcib3: [FILTER] > >> pci3: on pcib3 > >> pci3: domain=3, physical bus=0 > >> found-> vendor=0x108e, dev=0x8001, revid=0x00 > >> domain=3, bus=0, slot=0, func=0 > >> class=06-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) > >> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 > >> ns) > >> found-> vendor=0x108e, dev=0xabba, revid=0x11 > >> domain=3, bus=0, slot=1, func=0 > >> class=02-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) > >> lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 > >> (16000 ns) > >> intpin=a, irq=255 > >> map[10]: type Memory, range 32, base 0x200000, size 21, > >> memory disabled > >> found-> vendor=0x1077, dev=0x2200, revid=0x05 > >> domain=3, bus=0, slot=2, func=0 > >> class=01-00-00, hdrtype=0x00, mfdev=0 > >> cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) > >> lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 > >> (0 ns) > >> intpin=a, irq=255 > >> powerspec 1 supports D0 D3 current D0 > >> map[10]: type I/O Port, range 32, base 0x300, size 8, port > >> disabled > >> map[14]: type Memory, range 32, base 0x400000, size 12, > >> memory disabled > >> pci3: at device 1.0 (no driver attached) > >> Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 > >> isp0: port 0x300-0x3ff mem > >> 0x400000-0x400fff at device 2.0 on pci3 > >> isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x400000 > >> isp0: using Memory space register mapping > >> isp0: [MPSAFE] > >> isp0: [ITHREAD] > >> isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > >> isp0: Last F/W revision was 2.1.105 > >> isp0: 309 max I/O command limit set > >> isp0: invalid NVRAM header > >> isp0: invalid NVRAM header > >> isp0: Using Node WWN 0x400000007f000009 > >> isp0: Using Port WWN 0x400000007f000009 > >> syscons0: no video adapter found. > >> nexus0: type unknown (no driver attached) > >> Reducing kern.maxvnodes 134011 -> 100000 > >> procfs registered > >> Timecounter "tick" frequency 900000000 Hz quality 10 > >> Timecounters tick every 1.000 msec > >> lo0: bpf attached > >> isp0: LIP Received > >> isp0: Loop UP > >> isp0: Port Database Changed > >> ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire > >> isp0: Firmware State Ready> > >> acd0: setting PIO4 on CMD 646U2 chip > >> isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology > >> 'Private Loop' > >> isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 > >> isp0: PortID 0x0000ef handle 0x0 role Target arrived at tgt 0 > >> WWNN 0x20000004cfb551b1 WWPN 0x21000004cfb551b1 > >> isp0: PortID 0x0000e8 handle 0x1 role Target arrived at tgt 1 > >> WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed > >> acd0: DVDR drive at ata2 as master > >> acd0: read 4134KB/s (4134KB/s) write 172KB/s, 512KB buffer, PIO4 > >> acd0: Reads: CDDA > >> acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write > >> acd0: Audio: play, 16 volume levels > >> acd0: Mechanism: ejectable tray, unlocked > >> acd0: Medium: no/blank disc > >> Waiting 5 seconds for SCSI devices to settle > >> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. > >> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. > >> (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. > >> (noperiph:sym3:0:-1:-1): SCSI BUS reset delivered. > >> (probe0:isp0:0:0:0): Retrying Command > >> (probe1:isp0:0:1:0): Retrying Command > >> pass0 at isp0 bus 0 target 0 lun 0 > >> pass0: Fixed Direct Access SCSI-3 > >> device > >> pass0: Serial Number 3FP233TR00007316NY71 > >> pass0: 100.000MB/s transfers > >> pass0: Command Queueing Enabled > >> pass1 at isp0 bus 0 target 1 lun 0 > >> pass1: Fixed Direct Access SCSI-3 > >> device > >> pass1: Serial Number 3FP239L000007315HL0H > >> pass1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN > >> 0x21000004cfb558ed PortID 0xe8 > >> pass1: Command Queueing Enabled > >> GEOM: new disk da0 > >> GEOM: new disk da1 > >> da0 at isp0 bus 0 target 0 lun 0 > >> da0: Fixed Direct Access SCSI-3 device > >> da0: Serial Number 3FP233TR00007316NY71 > >> da0: 100.000MB/s transfers > >> da0: Command Queueing Enabled > >> da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > >> da1 at isp0 bus 0 target 1 lun 0 > >> da1: Fixed Direct Access SCSI-3 device > >> da1: Serial Number 3FP239L000007315HL0H > >> da1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN > >> 0x21000004cfb558ed PortID 0xe8 > >> da1: Command Queueing Enabled > >> da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) > >> SMP: AP CPU #1 Launched! > >> _______________________________________________ > >> freebsd-sparc64@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > >> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org > >> " > > > > _______________________________________________ > > freebsd-sparc64@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > > To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org > > " > > _______________________________________________ > freebsd-sparc64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64 > To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe@freebsd.org" From owner-freebsd-sparc64@FreeBSD.ORG Tue May 5 17:58:53 2009 Return-Path: Delivered-To: sparc64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8A09F106566B; Tue, 5 May 2009 17:58:53 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [64.7.153.18]) by mx1.freebsd.org (Postfix) with ESMTP id 605B58FC16; Tue, 5 May 2009 17:58:52 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smtp2.sentex.ca (smtp2c.sentex.ca [64.7.153.30]) by smarthost1.sentex.ca (8.14.3/8.14.3) with ESMTP id n45Hwpds067153; Tue, 5 May 2009 13:58:51 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by smtp2.sentex.ca (8.14.3/8.14.3) with ESMTP id n45HwpaT055846; Tue, 5 May 2009 13:58:51 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: by freebsd-current.sentex.ca (Postfix, from userid 666) id 0EE1B7302F; Tue, 5 May 2009 13:58:51 -0400 (EDT) Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Message-Id: <20090505175851.0EE1B7302F@freebsd-current.sentex.ca> Date: Tue, 5 May 2009 13:58:51 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at smtp2.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.64 on 64.7.153.18 Cc: Subject: [head tinderbox] failure on sparc64/sparc64 X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 05 May 2009 17:58:54 -0000 TB --- 2009-05-05 16:25:09 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-05 16:25:09 - starting HEAD tinderbox run for sparc64/sparc64 TB --- 2009-05-05 16:25:10 - cleaning the object tree TB --- 2009-05-05 16:25:42 - cvsupping the source tree TB --- 2009-05-05 16:25:42 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/sparc64/sparc64/supfile TB --- 2009-05-05 16:25:52 - building world TB --- 2009-05-05 16:25:52 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-05 16:25:52 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-05 16:25:52 - TARGET=sparc64 TB --- 2009-05-05 16:25:52 - TARGET_ARCH=sparc64 TB --- 2009-05-05 16:25:52 - TZ=UTC TB --- 2009-05-05 16:25:52 - __MAKE_CONF=/dev/null TB --- 2009-05-05 16:25:52 - cd /src TB --- 2009-05-05 16:25:52 - /usr/bin/make -B buildworld >>> World build started on Tue May 5 16:25:53 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Tue May 5 17:46:14 UTC 2009 TB --- 2009-05-05 17:46:14 - generating LINT kernel config TB --- 2009-05-05 17:46:14 - cd /src/sys/sparc64/conf TB --- 2009-05-05 17:46:14 - /usr/bin/make -B LINT TB --- 2009-05-05 17:46:14 - building LINT kernel TB --- 2009-05-05 17:46:14 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-05 17:46:14 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-05 17:46:14 - TARGET=sparc64 TB --- 2009-05-05 17:46:14 - TARGET_ARCH=sparc64 TB --- 2009-05-05 17:46:14 - TZ=UTC TB --- 2009-05-05 17:46:14 - __MAKE_CONF=/dev/null TB --- 2009-05-05 17:46:14 - cd /src TB --- 2009-05-05 17:46:14 - /usr/bin/make -B buildkernel KERNCONF=LINT >>> Kernel build for LINT started on Tue May 5 17:46:14 UTC 2009 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies >>> stage 3.2: building everything [...] /src/sys/netgraph/ng_base.c:142: warning: initialization makes pointer from integer without a cast /src/sys/netgraph/ng_base.c:143: warning: initialization makes integer from pointer without a cast /src/sys/netgraph/ng_base.c:143: error: initializer element is not computable at load time /src/sys/netgraph/ng_base.c:143: error: (near initialization for 'ng_deadnode.nd_magic') /src/sys/netgraph/ng_base.c:144: warning: initialization makes pointer from integer without a cast /src/sys/netgraph/ng_base.c:145: warning: braces around scalar initializer /src/sys/netgraph/ng_base.c:145: warning: (near initialization for 'ng_deadnode.lastline') /src/sys/netgraph/ng_base.c:145: warning: initialization makes integer from pointer without a cast *** Error code 1 Stop in /obj/sparc64/src/sys/LINT. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-05 17:58:51 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-05 17:58:51 - ERROR: failed to build lint kernel TB --- 2009-05-05 17:58:51 - 4436.18 user 419.07 system 5621.04 real http://tinderbox.des.no/tinderbox-head-HEAD-sparc64-sparc64.full From owner-freebsd-sparc64@FreeBSD.ORG Wed May 6 19:47:07 2009 Return-Path: Delivered-To: freebsd-sparc@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 43F2F106564A for ; Wed, 6 May 2009 19:47:07 +0000 (UTC) (envelope-from marius@alchemy.franken.de) Received: from alchemy.franken.de (alchemy.franken.de [194.94.249.214]) by mx1.freebsd.org (Postfix) with ESMTP id CA0078FC14 for ; Wed, 6 May 2009 19:47:06 +0000 (UTC) (envelope-from marius@alchemy.franken.de) Received: from alchemy.franken.de (localhost [127.0.0.1]) by alchemy.franken.de (8.14.3/8.14.3/ALCHEMY.FRANKEN.DE) with ESMTP id n46JK0Kl090056; Wed, 6 May 2009 21:20:02 +0200 (CEST) (envelope-from marius@alchemy.franken.de) Received: (from marius@localhost) by alchemy.franken.de (8.14.3/8.14.3/Submit) id n46JK09c090055; Wed, 6 May 2009 21:20:00 +0200 (CEST) (envelope-from marius) Date: Wed, 6 May 2009 21:20:00 +0200 From: Marius Strobl To: Mauro Calderara , Craig Butler Message-ID: <20090506192000.GA90010@alchemy.franken.de> References: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> <1241482033.86830.2.camel@main.lerwick.hopto.org> <51D049E9-2244-410E-AF62-A0D069DA19DB@phys.ethz.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <51D049E9-2244-410E-AF62-A0D069DA19DB@phys.ethz.ch> User-Agent: Mutt/1.4.2.3i Cc: freebsd-sparc@freebsd.org Subject: Re: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 06 May 2009 19:47:07 -0000 On Mon, May 04, 2009 at 05:57:51PM -0700, Mauro Calderara wrote: > >nics are Cassini's I think... > > > >found-> vendor=0x108e, dev=0xabba, revid=0x11 > > > >Correct Marius ?? correct > > Aww, if you could add support for these, that'd be great! They are > also built into the B100s of which I have a few... For cas(4) to work on B100, pci(4) still needs top be told that BARs containing 0 are valid at least on sparc64... Marius From owner-freebsd-sparc64@FreeBSD.ORG Thu May 7 22:03:39 2009 Return-Path: Delivered-To: sparc64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E6A601065675; Thu, 7 May 2009 22:03:38 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smarthost1.sentex.ca (smarthost1.sentex.ca [64.7.153.18]) by mx1.freebsd.org (Postfix) with ESMTP id A5D218FC20; Thu, 7 May 2009 22:03:38 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smtp2.sentex.ca (smtp2c.sentex.ca [64.7.153.30]) by smarthost1.sentex.ca (8.14.3/8.14.3) with ESMTP id n47M3aOF043812; Thu, 7 May 2009 18:03:36 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by smtp2.sentex.ca (8.14.3/8.14.3) with ESMTP id n47M3a37083053; Thu, 7 May 2009 18:03:36 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: by freebsd-current.sentex.ca (Postfix, from userid 666) id 10EBA7302F; Thu, 7 May 2009 18:03:36 -0400 (EDT) Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Message-Id: <20090507220336.10EBA7302F@freebsd-current.sentex.ca> Date: Thu, 7 May 2009 18:03:36 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at smtp2.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.64 on 64.7.153.18 Cc: Subject: [head tinderbox] failure on sparc64/sun4v X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 07 May 2009 22:03:39 -0000 TB --- 2009-05-07 21:18:13 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-07 21:18:13 - starting HEAD tinderbox run for sparc64/sun4v TB --- 2009-05-07 21:18:13 - cleaning the object tree TB --- 2009-05-07 21:18:46 - cvsupping the source tree TB --- 2009-05-07 21:18:46 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/sparc64/sun4v/supfile TB --- 2009-05-07 21:19:00 - building world TB --- 2009-05-07 21:19:00 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-07 21:19:00 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-07 21:19:00 - TARGET=sun4v TB --- 2009-05-07 21:19:00 - TARGET_ARCH=sparc64 TB --- 2009-05-07 21:19:00 - TZ=UTC TB --- 2009-05-07 21:19:00 - __MAKE_CONF=/dev/null TB --- 2009-05-07 21:19:00 - cd /src TB --- 2009-05-07 21:19:00 - /usr/bin/make -B buildworld >>> World build started on Thu May 7 21:19:06 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything [...] cc -O2 -pipe -DNEED_SOLARIS_BOOLEAN -I/src/cddl/usr.bin/sgsmsg/../../../sys/cddl/compat/opensolaris -I/src/cddl/usr.bin/sgsmsg/../../../cddl/compat/opensolaris/include -I/src/cddl/usr.bin/sgsmsg/../../../cddl/contrib/opensolaris/cmd/sgs/include -I/src/cddl/usr.bin/sgsmsg/../../../sys/cddl/contrib/opensolaris/uts/common -DNEED_SOLARIS_BOOLEAN -std=gnu89 -fstack-protector -Wno-unknown-pragmas -o sgsmsg avl.o sgsmsg.o string_table.o findprime.o ===> cddl/usr.bin/zinject (all) cc -O2 -pipe -I/src/cddl/usr.bin/zinject/../../../sys/cddl/compat/opensolaris -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/include -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/lib/libumem -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzfs/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzpool/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libnvpair -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/fs/zfs -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/sys -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/head -I/src/cddl/usr.bin/zinject/../../lib/libumem -DNEED_SOLARIS_BOOLEAN -std=gnu89 -fstack-protector -Wno-unknown-pragmas -c /src/cddl/usr.bin/zinject/../../contrib/opensolaris/cmd/zinject/zinject.c cc -O2 -pipe -I/src/cddl/usr.bin/zinject/../../../sys/cddl/compat/opensolaris -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/include -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/lib/libumem -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzfs/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzpool/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libnvpair -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/fs/zfs -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/sys -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/head -I/src/cddl/usr.bin/zinject/../../lib/libumem -DNEED_SOLARIS_BOOLEAN -std=gnu89 -fstack-protector -Wno-unknown-pragmas -c /src/cddl/usr.bin/zinject/../../contrib/opensolaris/cmd/zinject/translate.c /src/cddl/usr.bin/zinject/../../contrib/opensolaris/cmd/zinject/translate.c: In function 'translate_record': /src/cddl/usr.bin/zinject/../../contrib/opensolaris/cmd/zinject/translate.c:373: warning: passing argument 4 of 'calculate_range' discards qualifiers from pointer target type cc -O2 -pipe -I/src/cddl/usr.bin/zinject/../../../sys/cddl/compat/opensolaris -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/include -I/src/cddl/usr.bin/zinject/../../compat/opensolaris/lib/libumem -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzfs/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libzpool/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/lib/libnvpair -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/fs/zfs -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common/sys -I/src/cddl/usr.bin/zinject/../../../sys/cddl/contrib/opensolaris/uts/common -I/src/cddl/usr.bin/zinject/../../contrib/opensolaris/head -I/src/cddl/usr.bin/zinject/../../lib/libumem -DNEED_SOLARIS_BOOLEAN -std=gnu89 -fstack-protector -Wno-unknown-pragmas -o zinject zinject.o translate.o -lavl -lgeom -lm -lnvpair -lumem -luutil -lzfs -lzpool /obj/sun4v/src/tmp/usr/lib/libzpool.so: undefined reference to `vn_rele_async_fini' *** Error code 1 Stop in /src/cddl/usr.bin/zinject. *** Error code 1 Stop in /src/cddl/usr.bin. *** Error code 1 Stop in /src/cddl. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-07 22:03:35 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-07 22:03:35 - ERROR: failed to build world TB --- 2009-05-07 22:03:35 - 2232.81 user 262.47 system 2722.11 real http://tinderbox.des.no/tinderbox-head-HEAD-sparc64-sun4v.full From owner-freebsd-sparc64@FreeBSD.ORG Sat May 9 07:09:44 2009 Return-Path: Delivered-To: sparc64@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6C2F7106566B; Sat, 9 May 2009 07:09:44 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smarthost2.sentex.ca (smarthost2.sentex.ca [205.211.164.50]) by mx1.freebsd.org (Postfix) with ESMTP id 2EBF38FC19; Sat, 9 May 2009 07:09:44 +0000 (UTC) (envelope-from tinderbox@freebsd.org) Received: from smtp1.sentex.ca (smtp1.sentex.ca [199.212.134.4]) by smarthost2.sentex.ca (8.14.3/8.14.3) with ESMTP id n4979fOX017053; Sat, 9 May 2009 03:09:41 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: from freebsd-current.sentex.ca (freebsd-current.sentex.ca [64.7.128.98]) by smtp1.sentex.ca (8.14.3/8.14.3) with ESMTP id n4979fAU010730; Sat, 9 May 2009 03:09:41 -0400 (EDT) (envelope-from tinderbox@freebsd.org) Received: by freebsd-current.sentex.ca (Postfix, from userid 666) id 13C967302F; Sat, 9 May 2009 03:09:40 -0400 (EDT) Sender: FreeBSD Tinderbox From: FreeBSD Tinderbox To: FreeBSD Tinderbox , , Precedence: bulk Message-Id: <20090509070941.13C967302F@freebsd-current.sentex.ca> Date: Sat, 9 May 2009 03:09:40 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at smtp1.sentex.ca X-Virus-Status: Clean X-Scanned-By: MIMEDefang 2.64 on 205.211.164.50 Cc: Subject: [head tinderbox] failure on sparc64/sparc64 X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 09 May 2009 07:09:45 -0000 TB --- 2009-05-09 05:43:11 - tinderbox 2.6 running on freebsd-current.sentex.ca TB --- 2009-05-09 05:43:11 - starting HEAD tinderbox run for sparc64/sparc64 TB --- 2009-05-09 05:43:12 - cleaning the object tree TB --- 2009-05-09 05:43:49 - cvsupping the source tree TB --- 2009-05-09 05:43:49 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/HEAD/sparc64/sparc64/supfile TB --- 2009-05-09 05:43:59 - building world TB --- 2009-05-09 05:43:59 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-09 05:43:59 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-09 05:43:59 - TARGET=sparc64 TB --- 2009-05-09 05:43:59 - TARGET_ARCH=sparc64 TB --- 2009-05-09 05:43:59 - TZ=UTC TB --- 2009-05-09 05:43:59 - __MAKE_CONF=/dev/null TB --- 2009-05-09 05:43:59 - cd /src TB --- 2009-05-09 05:43:59 - /usr/bin/make -B buildworld >>> World build started on Sat May 9 05:44:03 UTC 2009 >>> Rebuilding the temporary build tree >>> stage 1.1: legacy release compatibility shims >>> stage 1.2: bootstrap tools >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3: cross tools >>> stage 4.1: building includes >>> stage 4.2: building libraries >>> stage 4.3: make dependencies >>> stage 4.4: building everything >>> World build completed on Sat May 9 07:05:13 UTC 2009 TB --- 2009-05-09 07:05:13 - generating LINT kernel config TB --- 2009-05-09 07:05:13 - cd /src/sys/sparc64/conf TB --- 2009-05-09 07:05:13 - /usr/bin/make -B LINT TB --- 2009-05-09 07:05:13 - building LINT kernel TB --- 2009-05-09 07:05:13 - MAKEOBJDIRPREFIX=/obj TB --- 2009-05-09 07:05:13 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2009-05-09 07:05:13 - TARGET=sparc64 TB --- 2009-05-09 07:05:13 - TARGET_ARCH=sparc64 TB --- 2009-05-09 07:05:13 - TZ=UTC TB --- 2009-05-09 07:05:13 - __MAKE_CONF=/dev/null TB --- 2009-05-09 07:05:13 - cd /src TB --- 2009-05-09 07:05:13 - /usr/bin/make -B buildkernel KERNCONF=LINT >>> Kernel build for LINT started on Sat May 9 07:05:14 UTC 2009 >>> stage 1: configuring the kernel >>> stage 2.1: cleaning up the object tree >>> stage 2.2: rebuilding the object tree >>> stage 2.3: build tools >>> stage 3.1: making dependencies [...] awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -q awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -h rm -f .depend mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE -DHAVE_KERNEL_OPTION_HEADERS -I. -I@ -I@/contrib/altq -I/obj/sparc64/src/sys/LINT /src/sys/modules/nullfs/../../fs/nullfs/null_subr.c /src/sys/modules/nullfs/../../fs/nullfs/null_vfsops.c /src/sys/modules/nullfs/../../fs/nullfs/null_vnops.c ===> opensolaris (depend) @ -> /src/sys machine -> /src/sys/sparc64/include make: don't know how to make atomic.S. Stop *** Error code 2 Stop in /src/sys/modules. *** Error code 1 Stop in /obj/sparc64/src/sys/LINT. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2009-05-09 07:09:40 - WARNING: /usr/bin/make returned exit code 1 TB --- 2009-05-09 07:09:40 - ERROR: failed to build lint kernel TB --- 2009-05-09 07:09:40 - 3921.31 user 392.82 system 5188.72 real http://tinderbox.des.no/tinderbox-head-HEAD-sparc64-sparc64.full