Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Nov 2010 10:47:28 +0300
From:      "Igor Bayunov" <igor.bayunov@oggi.spb.ru>
To:        <freebsd-acpi@freebsd.org>
Subject:   PCI netwok devices does not work on Intel DP43BFL
Message-ID:  <97255D57E33C453D8C82B84EA4EDAFC4@OFFICE.local>

next in thread | raw e-mail | index | archive | help
Hello,
I have a problem with motheboard Intel DP43BFL and FreeBSD-7.3.
Any network card (for example 3Com905, Realtek8139) installed in any PCI
slot is not found.
BIOS has updated. Boot without ACPI failed.
FreeBSD-8.1 has the same problem.
The following text is in the dmesg:
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
AE_NOT_FOUND.


Full dmesg:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.3-RELEASE #0: Sun Mar 21 06:15:01 UTC 2010
    root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e8f000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e8f200.
Calibrating clock(s) ... i8254 clock: 1192026 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2662675856 Hz
CPU: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (2662.68-MHz 686-class
CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,P
DCM,SSE4.1,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 3072 kbytes, 8-way associative, 64 bytes/line
real memory  = 3481272320 (3320 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x00000000cb8d8fff, 3398123520 bytes (829620 pages)
0x00000000cf613000 - 0x00000000cf613fff, 4096 bytes (1 pages)
0x00000000cf68c000 - 0x00000000cf7effff, 1458176 bytes (356 pages)
avail memory = 3398901760 (3241 MB)
Table 'FACP' at 0xcf61bd98
Table 'APIC' at 0xcf61bf18
APIC: Found table at 0xcf61bf18
MP Configuration Table version 1.4 found at 0xc00fc9f0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
ACPI APIC Table: <INTEL  DP43BFL >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
pnpbios: Found PnP BIOS data at 0xc00f0a50
pnpbios: Entry = f0000:bade  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ULE: setup cpu group 2
ULE: setup cpu 2
ULE: adding cpu 2 to group 2: cpus 1 mask 0x4
ULE: setup cpu group 3
ULE: setup cpu 3
ULE: adding cpu 3 to group 3: cpus 1 mask 0x8
ACPI: RSDP @ 0x0xf0410/0x0024 (v  2  INTEL)
ACPI: XSDT @ 0x0xcf61ce18/0x0044 (v  1 INTEL  DP43BFL  0x00000056 MSFT
0x00010013)
ACPI: FACP @ 0x0xcf61bd98/0x00F4 (v  4 INTEL  DP43BFL  0x00000056 MSFT
0x00010013)
ACPI: DSDT @ 0x0xcf614018/0x61A2 (v  1 INTEL  DP43BFL  0x00000056 INTL
0x20051117)
ACPI: FACS @ 0x0xcf625e40/0x0040
ACPI: APIC @ 0x0xcf61bf18/0x006C (v  2 INTEL  DP43BFL  0x00000056 MSFT
0x00010013)
ACPI: MCFG @ 0x0xcf61df18/0x003C (v  1 INTEL  DP43BFL  0x00000056 MSFT
0x00000097)
ACPI: HPET @ 0x0xcf61de98/0x0038 (v  1 INTEL  DP43BFL  0x00000056 AMI.
0x00000003)
MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 21 2010
06:13:51)
npx0: INT 16 interface
acpi0: <INTEL DP43BFL> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa08
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=2e208086)
pcibios: No call entry point
AcpiOsDerivePciId: \\_SB_.PCI0.GFX0.IGDP -> bus 0 dev 2 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc680c000 pa 0x1000
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 6 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2e20, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2e21, revid=0x03
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a37, revid=0x00
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xf0c0, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a38, revid=0x00
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	map[20]: type I/O Port, range 32, base 0xf0a0, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x3a39, revid=0x00
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type I/O Port, range 32, base 0xf080, size  5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3c, revid=0x00
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe3406000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3e, revid=0x00
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe3400000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x3a40, revid=0x00
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a42, revid=0x00
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a44, revid=0x00
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a46, revid=0x00
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a48, revid=0x00
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x3a4a, revid=0x00
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x3a34, revid=0x00
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xf060, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x3a35, revid=0x00
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a36, revid=0x00
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type I/O Port, range 32, base 0xf020, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a3a, revid=0x00
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe3405000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0x90
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a18, revid=0x00
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3a20, revid=0x00
	domain=0, bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xf190, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xf180, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xf170, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xf160, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xf150, size  4, enabled
	map[24]: type I/O Port, range 32, base 0xf140, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x3a30, revid=0x00
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[10]: type Memory, range 64, base 0xe3404000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0xf000, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x3a26, revid=0x00
	domain=0, bus=0, slot=31, func=5
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xf130, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xf120, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xf110, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xf100, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xf0f0, size  4, enabled
	map[24]: type I/O Port, range 32, base 0xf0e0, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xd0000000-0xe30fffff
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x10de, dev=0x06e4, revid=0xa1
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe2000000, size 24, enabled
pcib1: requested memory range 0xe2000000-0xe2ffffff: good
	map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size
28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[1c]: type Memory, range 64, base 0xe0000000, size 25, enabled
pcib1: requested memory range 0xe0000000-0xe1ffffff: good
	map[24]: type I/O Port, range 32, base 0xe000, size  7, enabled
pcib1: requested I/O range 0xe000-0xe07f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at
device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 16 at device
26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0c0
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 21 at device
26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf0a0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 18 at device
26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf080
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe3406000-0xe34063ff irq 18
at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe3406000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: waiting for BIOS to give up control
usb3: timed out waiting for BIOS
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xe3300000-0xe33fffff
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x11ab, dev=0x6101, revid=0xb2
	domain=0, bus=2, slot=0, func=0
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0xd040, size  3, enabled
pcib2: requested I/O range 0xd040-0xd047: in range
	map[14]: type I/O Port, range 32, base 0xd030, size  2, enabled
pcib2: requested I/O range 0xd030-0xd033: in range
	map[18]: type I/O Port, range 32, base 0xd020, size  3, enabled
pcib2: requested I/O range 0xd020-0xd027: in range
	map[1c]: type I/O Port, range 32, base 0xd010, size  2, enabled
pcib2: requested I/O range 0xd010-0xd013: in range
	map[20]: type I/O Port, range 32, base 0xd000, size  4, enabled
pcib2: requested I/O range 0xd000-0xd00f: in range
	map[24]: type Memory, range 32, base 0xe3300000, size  9, enabled
pcib2: requested memory range 0xe3300000-0xe33001ff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
atapci0: <Marvell 88SX6101 UDMA133 controller> port
0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem
0xe3300000-0xe33001ff irq 16 at device 0.0 on pci2
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd040
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd030
ata2: reset tp1 mask=03 ostat0=60 ostat1=70
ata2: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata2: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata2: reset tp2 stat0=20 stat1=30 devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xf000-0xfff
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0xf000-0xfff
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0xf000-0xfff
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xf000-0xfff
pcib7:   memory decode     0xe3200000-0xe32fffff
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found->	vendor=0x14e4, dev=0x1691, revid=0x01
	domain=0, bus=7, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe3200000, size 16, enabled
pcib7: requested memory range 0xe3200000-0xe320ffff: good
pcib7: matched entry for 7.0.INTA
pcib7: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xe3200000-0xe320ffff
irq 17 at device 0.0 on pci7
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe3200000
bge0: adjust device control 0x0000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 52
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x00d897, model 0x0019, rev. 1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1c:c0:cc:54:5f
bge0: [MPSAFE]
bge0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 23 at device
29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf060
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 19 at device
29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf040
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xf020-0xf03f irq 18 at device
29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf020
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe3405000-0xe34053ff irq 23
at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe3405000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: waiting for BIOS to give up control
usb7: timed out waiting for BIOS
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib8:   domain            0
pcib8:   secondary bus     32
pcib8:   subordinate bus   8
pcib8:   I/O decode        0xc000-0xcfff
pcib8:   memory decode     0xe3100000-0xe31fffff
pcib8:   no prefetched decode
pcib8:   Subtractively decoded bridge.
pci32: <ACPI PCI bus> on pcib8
pci32: domain=0, physical bus=32
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f,0xf140
-0xf14f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf150
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf140
ata3: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf190
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf180
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf170
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf160
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff,0xf0e0
-0xf0ef irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf0f0
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf0e0
ata5: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf130
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf120
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf110
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf100
ata6: reset tp1 mask=03 ostat0=7f ostat1=7f
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata6: reset tp2 stat0=ff stat1=ff devices=0x0
ata6: [MPSAFE]
ata6: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
sio0: irq maps: 0xca9 0xcb9 0xca9 0xca9
sio0: irq maps: 0xca9 0xcb9 0xca9 0xca9
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xcf61fc18/0x0374 (v  1    AMI      IST 0x00000001 MSFT
0x03000001)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (1821, 2085)
est0: Invalid freq 2331, ignored.
est0: Invalid id16 (set, cur) = (1558, 2085)
est0: Invalid freq 1998, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (1821, 2085)
est1: Invalid freq 2331, ignored.
est1: Invalid id16 (set, cur) = (1558, 2085)
est1: Invalid freq 1998, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (1821, 2085)
est2: Invalid freq 2331, ignored.
est2: Invalid id16 (set, cur) = (1558, 2085)
est2: Invalid freq 1998, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (1821, 2085)
est3: Invalid freq 2331, ignored.
est3: Invalid id16 (set, cur) = (1558, 2085)
est3: Invalid freq 1998, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd0fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58
ata1: [MPSAFE]
ata1: [ITHREAD]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xca9 0xca9 0xca9 0xca9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 213889 -> 100000
procfs registered
lapic: Divisor 2, Frequency 166417245 hz
Timecounter "TSC" frequency 2662675856 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 76319MB <Seagate ST380817AS 3.42> at ata3-master SATA150
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ata4: reiniting channel ..
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: reinit done ..
ata4: reiniting channel ..
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata4: reinit done ..
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <Optiarc DVD RW AD-7240S/1.03> DVDR drive at ata4 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer,
SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 2
ioapic0: Assigning ISA IRQ 14 to local APIC 3
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 2
ioapic0: Assigning PCI IRQ 19 to local APIC 3
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 2
Trying to mount root from ufs:/dev/ad6s1a
start_init: trying /sbin/init




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?97255D57E33C453D8C82B84EA4EDAFC4>